1768 files changed, 129430 insertions, 59530 deletions

diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S
index 76cc0cb5fc2e..e38671c922bc 100644
--- a/arch/alpha/kernel/entry.S
+++ b/arch/alpha/kernel/entry.S
@@ -196,6 +196,7 @@ entUna:
 	stq	$26, 208($sp)
 	stq	$27, 216($sp)
 	stq	$28, 224($sp)
+	mov	$sp, $19
 	stq	$gp, 232($sp)
 	lda	$8, 0x3fff
 	stq	$31, 248($sp)
diff --git a/arch/alpha/kernel/pci-noop.c b/arch/alpha/kernel/pci-noop.c
index 582a3519fb28..9903e3a79102 100644
--- a/arch/alpha/kernel/pci-noop.c
+++ b/arch/alpha/kernel/pci-noop.c
@@ -154,7 +154,7 @@ pci_dma_supported(struct pci_dev *hwdev, dma_addr_t mask)
 
 void *
 dma_alloc_coherent(struct device *dev, size_t size,
-		   dma_addr_t *dma_handle, int gfp)
+		   dma_addr_t *dma_handle, gfp_t gfp)
 {
 	void *ret;
 
diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c
index 7cb23f12ecbd..c468e312e5f8 100644
--- a/arch/alpha/kernel/pci_iommu.c
+++ b/arch/alpha/kernel/pci_iommu.c
@@ -397,7 +397,7 @@ pci_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp)
 {
 	void *cpu_addr;
 	long order = get_order(size);
-	int gfp = GFP_ATOMIC;
+	gfp_t gfp = GFP_ATOMIC;
 
 try_again:
 	cpu_addr = (void *)__get_free_pages(gfp, order);
diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c
index fa98dae3cd98..a8682612abc0 100644
--- a/arch/alpha/kernel/process.c
+++ b/arch/alpha/kernel/process.c
@@ -43,21 +43,17 @@
 #include "proto.h"
 #include "pci_impl.h"
 
-void default_idle(void)
-{
-	barrier();
-}
-
 void
 cpu_idle(void)
 {
+	set_thread_flag(TIF_POLLING_NRFLAG);
+
 	while (1) {
-		void (*idle)(void) = default_idle;
 		/* FIXME -- EV6 and LCA45 know how to power down
 		   the CPU.  */
 
 		while (!need_resched())
-			idle();
+			cpu_relax();
 		schedule();
 	}
 }
@@ -127,6 +123,10 @@ common_shutdown_1(void *generic_ptr)
 	/* If booted from SRM, reset some of the original environment. */
 	if (alpha_using_srm) {
 #ifdef CONFIG_DUMMY_CONSOLE
+		/* If we've gotten here after SysRq-b, leave interrupt
+		   context before taking over the console. */
+		if (in_interrupt())
+			irq_exit();
 		/* This has the effect of resetting the VGA video origin.  */
 		take_over_console(&dummy_con, 0, MAX_NR_CONSOLES-1, 1);
 #endif
diff --git a/arch/alpha/kernel/time.c b/arch/alpha/kernel/time.c
index 67be50b7d80a..6b2921be1909 100644
--- a/arch/alpha/kernel/time.c
+++ b/arch/alpha/kernel/time.c
@@ -55,10 +55,6 @@
 #include "proto.h"
 #include "irq_impl.h"
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 extern unsigned long wall_jiffies;	/* kernel/timer.c */
 
 static int set_rtc_mmss(unsigned long);
diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c
index 6f509a644bdd..f9d12319e0fb 100644
--- a/arch/alpha/kernel/traps.c
+++ b/arch/alpha/kernel/traps.c
@@ -446,16 +446,15 @@ struct unaligned_stat {
 
 
 /* Macro for exception fixup code to access integer registers.  */
-#define una_reg(r)  (regs.regs[(r) >= 16 && (r) <= 18 ? (r)+19 : (r)])
+#define una_reg(r)  (regs->regs[(r) >= 16 && (r) <= 18 ? (r)+19 : (r)])
 
 
 asmlinkage void
 do_entUna(void * va, unsigned long opcode, unsigned long reg,
-	  unsigned long a3, unsigned long a4, unsigned long a5,
-	  struct allregs regs)
+	  struct allregs *regs)
 {
 	long error, tmp1, tmp2, tmp3, tmp4;
-	unsigned long pc = regs.pc - 4;
+	unsigned long pc = regs->pc - 4;
 	const struct exception_table_entry *fixup;
 
 	unaligned[0].count++;
@@ -636,7 +635,7 @@ got_exception:
 		printk("Forwarding unaligned exception at %lx (%lx)\n",
 		       pc, newpc);
 
-		(&regs)->pc = newpc;
+		regs->pc = newpc;
 		return;
 	}
 
@@ -650,7 +649,7 @@ got_exception:
 	       current->comm, current->pid);
 
 	printk("pc = [<%016lx>]  ra = [<%016lx>]  ps = %04lx\n",
-	       pc, una_reg(26), regs.ps);
+	       pc, una_reg(26), regs->ps);
 	printk("r0 = %016lx  r1 = %016lx  r2 = %016lx\n",
 	       una_reg(0), una_reg(1), una_reg(2));
 	printk("r3 = %016lx  r4 = %016lx  r5 = %016lx\n",
@@ -670,10 +669,10 @@ got_exception:
 	       una_reg(22), una_reg(23), una_reg(24));
 	printk("r25= %016lx  r27= %016lx  r28= %016lx\n",
 	       una_reg(25), una_reg(27), una_reg(28));
-	printk("gp = %016lx  sp = %p\n", regs.gp, &regs+1);
+	printk("gp = %016lx  sp = %p\n", regs->gp, regs+1);
 
 	dik_show_code((unsigned int *)pc);
-	dik_show_trace((unsigned long *)(&regs+1));
+	dik_show_trace((unsigned long *)(regs+1));
 
 	if (test_and_set_thread_flag (TIF_DIE_IF_KERNEL)) {
 		printk("die_if_kernel recursion detected.\n");
diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c
index c7481d59b6df..6d5251254f68 100644
--- a/arch/alpha/mm/numa.c
+++ b/arch/alpha/mm/numa.c
@@ -371,6 +371,8 @@ show_mem(void)
 	show_free_areas();
 	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
 	for_each_online_node(nid) {
+		unsigned long flags;
+		pgdat_resize_lock(NODE_DATA(nid), &flags);
 		i = node_spanned_pages(nid);
 		while (i-- > 0) {
 			struct page *page = nid_page_nr(nid, i);
@@ -384,6 +386,7 @@ show_mem(void)
 			else
 				shared += page_count(page) - 1;
 		}
+		pgdat_resize_unlock(NODE_DATA(nid), &flags);
 	}
 	printk("%ld pages of RAM\n",total);
 	printk("%ld free pages\n",free);
diff --git a/arch/alpha/mm/remap.c b/arch/alpha/mm/remap.c
index 19817ad3d89b..a78356c3ead5 100644
--- a/arch/alpha/mm/remap.c
+++ b/arch/alpha/mm/remap.c
@@ -2,7 +2,6 @@
 #include <asm/pgalloc.h>
 #include <asm/cacheflush.h>
 
-/* called with the page_table_lock held */
 static inline void 
 remap_area_pte(pte_t * pte, unsigned long address, unsigned long size, 
 	       unsigned long phys_addr, unsigned long flags)
@@ -31,7 +30,6 @@ remap_area_pte(pte_t * pte, unsigned long address, unsigned long size,
 	} while (address && (address < end));
 }
 
-/* called with the page_table_lock held */
 static inline int 
 remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned long size, 
 	       unsigned long phys_addr, unsigned long flags)
@@ -46,7 +44,7 @@ remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned long size,
 	if (address >= end)
 		BUG();
 	do {
-		pte_t * pte = pte_alloc_kernel(&init_mm, pmd, address);
+		pte_t * pte = pte_alloc_kernel(pmd, address);
 		if (!pte)
 			return -ENOMEM;
 		remap_area_pte(pte, address, end - address, 
@@ -70,7 +68,6 @@ __alpha_remap_area_pages(unsigned long address, unsigned long phys_addr,
 	flush_cache_all();
 	if (address >= end)
 		BUG();
-	spin_lock(&init_mm.page_table_lock);
 	do {
 		pmd_t *pmd;
 		pmd = pmd_alloc(&init_mm, dir, address);
@@ -84,7 +81,6 @@ __alpha_remap_area_pages(unsigned long address, unsigned long phys_addr,
 		address = (address + PGDIR_SIZE) & PGDIR_MASK;
 		dir++;
 	} while (address && (address < end));
-	spin_unlock(&init_mm.page_table_lock);
 	return error;
 }
 
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 11fff042aa81..4b15f5f1e254 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -194,6 +194,13 @@ config ARCH_VERSATILE
 	help
 	  This enables support for ARM Ltd Versatile board.
 
+config ARCH_REALVIEW
+	bool "RealView"
+	select ARM_AMBA
+	select ICST307
+	help
+	  This enables support for ARM Ltd RealView boards.
+
 config ARCH_IMX
 	bool "IMX"
 
@@ -204,6 +211,7 @@ config ARCH_H720X
 
 config ARCH_AAEC2000
 	bool "Agilent AAEC-2000 based"
+	select ARM_AMBA
 	help
 	  This enables support for systems based on the Agilent AAEC-2000
 
@@ -231,6 +239,8 @@ source "arch/arm/plat-omap/Kconfig"
 
 source "arch/arm/mach-omap1/Kconfig"
 
+source "arch/arm/mach-omap2/Kconfig"
+
 source "arch/arm/mach-s3c2410/Kconfig"
 
 source "arch/arm/mach-lh7a40x/Kconfig"
@@ -243,6 +253,8 @@ source "arch/arm/mach-versatile/Kconfig"
 
 source "arch/arm/mach-aaec2000/Kconfig"
 
+source "arch/arm/mach-realview/Kconfig"
+
 # Definitions to make life easier
 config ARCH_ACORN
 	bool
@@ -314,7 +326,7 @@ menu "Kernel Features"
 
 config SMP
 	bool "Symmetric Multi-Processing (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && BROKEN #&& n
+	depends on EXPERIMENTAL && REALVIEW_MPCORE
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -339,6 +351,23 @@ config NR_CPUS
 	depends on SMP
 	default "4"
 
+config HOTPLUG_CPU
+	bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
+	depends on SMP && HOTPLUG && EXPERIMENTAL
+	help
+	  Say Y here to experiment with turning CPUs off and on.  CPUs
+	  can be controlled through /sys/devices/system/cpu.
+
+config LOCAL_TIMERS
+	bool "Use local timer interrupts"
+	depends on SMP && REALVIEW_MPCORE
+	default y
+	help
+	  Enable support for local timers on SMP platforms, rather then the
+	  legacy IPI broadcast method.  Local timers allows the system
+	  accounting to be spread across the timer interval, preventing a
+	  "thundering herd" at every timer tick.
+
 config PREEMPT
 	bool "Preemptible Kernel (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
@@ -568,7 +597,7 @@ config FPE_NWFPE
 
 config FPE_NWFPE_XP
 	bool "Support extended precision"
-	depends on FPE_NWFPE && !CPU_BIG_ENDIAN
+	depends on FPE_NWFPE
 	help
 	  Say Y to include 80-bit support in the kernel floating-point
 	  emulator.  Otherwise, only 32 and 64-bit support is compiled in.
@@ -623,25 +652,11 @@ endmenu
 
 menu "Power management options"
 
-config PM
-	bool "Power Management support"
-	---help---
-	  "Power Management" means that parts of your computer are shut
-	  off or put into a power conserving "sleep" mode if they are not
-	  being used.  There are two competing standards for doing this: APM
-	  and ACPI.  If you want to use either one, say Y here and then also
-	  to the requisite support below.
-
-	  Power Management is most important for battery powered laptop
-	  computers; if you have a laptop, check out the Linux Laptop home
-	  page on the WWW at <http://www.linux-on-laptops.com/> or
-	  Tuxmobil - Linux on Mobile Computers at <http://www.tuxmobil.org/>
-	  and the Battery Powered Linux mini-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+source "kernel/power/Kconfig"
 
 config APM
 	tristate "Advanced Power Management Emulation"
-	depends on PM
+	depends on PM_LEGACY
 	---help---
 	  APM is a BIOS specification for saving power using several different
 	  techniques. This is mostly useful for battery powered laptops with
@@ -673,6 +688,8 @@ menu "Device Drivers"
 
 source "drivers/base/Kconfig"
 
+source "drivers/connector/Kconfig"
+
 if ALIGNMENT_TRAP
 source "drivers/mtd/Kconfig"
 endif
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 130e6228b587..81bd2193fe6d 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -8,7 +8,7 @@
 # Copyright (C) 1995-2001 by Russell King
 
 LDFLAGS_vmlinux	:=-p --no-undefined -X
-CPPFLAGS_vmlinux.lds = -DTEXTADDR=$(TEXTADDR) -DDATAADDR=$(DATAADDR)
+CPPFLAGS_vmlinux.lds = -DKERNEL_RAM_ADDR=$(TEXTADDR)
 OBJCOPYFLAGS	:=-O binary -R .note -R .comment -S
 GZFLAGS		:=-9
 #CFLAGS		+=-pipe
@@ -38,6 +38,7 @@ comma = ,
 # macro, but instead defines a whole series of macros which makes
 # testing for a specific architecture or later rather impossible.
 arch-$(CONFIG_CPU_32v6)		:=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
+arch-$(CONFIG_CPU_32v6K)	:=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
 arch-$(CONFIG_CPU_32v5)		:=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4)
 arch-$(CONFIG_CPU_32v4)		:=-D__LINUX_ARM_ARCH__=4 -march=armv4
 arch-$(CONFIG_CPU_32v3)		:=-D__LINUX_ARM_ARCH__=3 -march=armv3
@@ -53,7 +54,7 @@ tune-$(CONFIG_CPU_ARM926T)	:=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_SA110)	:=-mtune=strongarm110
 tune-$(CONFIG_CPU_SA1100)	:=-mtune=strongarm1100
 tune-$(CONFIG_CPU_XSCALE)	:=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_V6)		:=-mtune=strongarm
+tune-$(CONFIG_CPU_V6)		:=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
 
 # Need -Uarm for gcc < 3.x
 CFLAGS_ABI	:=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) $(call cc-option,-mno-thumb-interwork,)
@@ -92,6 +93,7 @@ textaddr-$(CONFIG_ARCH_FORTUNET)   := 0xc0008000
  machine-$(CONFIG_ARCH_IXP4XX)	   := ixp4xx
  machine-$(CONFIG_ARCH_IXP2000)    := ixp2000
  machine-$(CONFIG_ARCH_OMAP1)	   := omap1
+ machine-$(CONFIG_ARCH_OMAP2)	   := omap2
   incdir-$(CONFIG_ARCH_OMAP)	   := omap
  machine-$(CONFIG_ARCH_S3C2410)	   := s3c2410
  machine-$(CONFIG_ARCH_LH7A40X)	   := lh7a40x
@@ -99,6 +101,7 @@ textaddr-$(CONFIG_ARCH_FORTUNET)   := 0xc0008000
  machine-$(CONFIG_ARCH_IMX)	   := imx
  machine-$(CONFIG_ARCH_H720X)	   := h720x
  machine-$(CONFIG_ARCH_AAEC2000)   := aaec2000
+ machine-$(CONFIG_ARCH_REALVIEW)   := realview
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.
@@ -108,27 +111,19 @@ export CFLAGS_3c589_cs.o
 endif
 
 TEXTADDR := $(textaddr-y)
-ifeq ($(CONFIG_XIP_KERNEL),y)
-  DATAADDR := $(TEXTADDR)
-  xipaddr-$(CONFIG_ARCH_CO285) := 0x5f000000
-  xipaddr-y ?= 0xbf000000
-  # Replace phys addr with virt addr while keeping offset from base.
-  TEXTADDR := $(shell echo $(CONFIG_XIP_PHYS_ADDR) $(xipaddr-y) | \
-                      awk --non-decimal-data '/[:xdigit:]/ \
-                          { printf("0x%x\n", and($$1, 0x000fffff) + $$2) }' )
-endif
 
 ifeq ($(incdir-y),)
 incdir-y := $(machine-y)
 endif
 INCDIR   := arch-$(incdir-y)
+
 ifneq ($(machine-y),)
 MACHINE  := arch/arm/mach-$(machine-y)/
 else
 MACHINE  :=
 endif
   
-export	TEXTADDR DATAADDR GZFLAGS
+export	TEXTADDR GZFLAGS
 
 # Do we have FASTFPE?
 FASTFPE		:=arch/arm/fastfpe
@@ -150,7 +145,7 @@ drivers-$(CONFIG_OPROFILE)      += arch/arm/oprofile/
 drivers-$(CONFIG_ARCH_CLPS7500)	+= drivers/acorn/char/
 drivers-$(CONFIG_ARCH_L7200)	+= drivers/acorn/char/
 
-libs-y				+= arch/arm/lib/
+libs-y				:= arch/arm/lib/ $(libs-y)
 
 # Default target when executing plain make
 ifeq ($(CONFIG_XIP_KERNEL),y)
@@ -175,10 +170,10 @@ else
 endif
 	@touch $@
 
-archprepare: maketools include/asm-arm/.arch
+archprepare: maketools
 
 .PHONY: maketools FORCE
-maketools: include/linux/version.h FORCE
+maketools: include/linux/version.h include/asm-arm/.arch FORCE
 	$(Q)$(MAKE) $(build)=arch/arm/tools include/asm-arm/mach-types.h
 
 # Convert bzImage to zImage
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 7c7f475e213e..6abafb6f1844 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -19,38 +19,28 @@
  */
 #ifdef DEBUG
 
-#include <asm/arch/debug-macro.S>
-
 #if defined(CONFIG_DEBUG_ICEDCC)
 		.macro	loadsp, rb
 		.endm
-		.macro writeb, ch, rb
+		.macro	writeb, ch, rb
 		mcr	p14, 0, \ch, c0, c1, 0
 		.endm
 #else
+
+#include <asm/arch/debug-macro.S>
+
 		.macro	writeb,	ch, rb
 		senduart \ch, \rb
 		.endm
 
-#if defined(CONFIG_FOOTBRIDGE) || \
-    defined(CONFIG_ARCH_RPC) || \
-    defined(CONFIG_ARCH_INTEGRATOR) || \
-    defined(CONFIG_ARCH_PXA) || \
-    defined(CONFIG_ARCH_IXP4XX) || \
-    defined(CONFIG_ARCH_IXP2000) || \
-    defined(CONFIG_ARCH_LH7A40X) || \
-    defined(CONFIG_ARCH_OMAP)
-		.macro	loadsp,	rb
-		addruart \rb
-		.endm
-#elif defined(CONFIG_ARCH_SA1100)
+#if defined(CONFIG_ARCH_SA1100)
 		.macro	loadsp, rb
 		mov	\rb, #0x80000000	@ physical base address
-#  if defined(CONFIG_DEBUG_LL_SER3)
+#ifdef CONFIG_DEBUG_LL_SER3
 		add	\rb, \rb, #0x00050000	@ Ser3
-#  else
+#else
 		add	\rb, \rb, #0x00010000	@ Ser1
-#  endif
+#endif
 		.endm
 #elif defined(CONFIG_ARCH_IOP331)
 		.macro loadsp, rb
@@ -64,7 +54,9 @@
 		add	\rb, \rb, #0x4000 * CONFIG_S3C2410_LOWLEVEL_UART_PORT
 		.endm
 #else
-#error no serial architecture defined
+		.macro	loadsp,	rb
+		addruart \rb
+		.endm
 #endif
 #endif
 #endif
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 23434b56786a..5ab94584baee 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -30,7 +30,7 @@ unsigned int __machine_arch_type;
 #define putstr icedcc_putstr
 #define putc icedcc_putc
 
-extern void idedcc_putc(int ch);
+extern void icedcc_putc(int ch);
 
 static void
 icedcc_putstr(const char *ptr)
@@ -283,8 +283,14 @@ void flush_window(void)
 	putstr(".");
 }
 
+#ifndef arch_error
+#define arch_error(x)
+#endif
+
 static void error(char *x)
 {
+	arch_error(x);
+
 	putstr("\n\n");
 	putstr(x);
 	putstr("\n\n -- System halted");
diff --git a/arch/arm/common/amba.c b/arch/arm/common/amba.c
index c6beb751f2a9..e1013112c354 100644
--- a/arch/arm/common/amba.c
+++ b/arch/arm/common/amba.c
@@ -10,6 +10,8 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/string.h>
+#include <linux/slab.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index cbf2165476b0..ad6c89a555bb 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -33,8 +33,8 @@
 #include <asm/cacheflush.h>
 
 #undef DEBUG
-
 #undef STATS
+
 #ifdef STATS
 #define DO_STATS(X) do { X ; } while (0)
 #else
@@ -52,26 +52,31 @@ struct safe_buffer {
 	int		direction;
 
 	/* safe buffer info */
-	struct dma_pool *pool;
+	struct dmabounce_pool *pool;
 	void		*safe;
 	dma_addr_t	safe_dma_addr;
 };
 
+struct dmabounce_pool {
+	unsigned long	size;
+	struct dma_pool	*pool;
+#ifdef STATS
+	unsigned long	allocs;
+#endif
+};
+
 struct dmabounce_device_info {
 	struct list_head node;
 
 	struct device *dev;
-	struct dma_pool *small_buffer_pool;
-	struct dma_pool *large_buffer_pool;
 	struct list_head safe_buffers;
-	unsigned long small_buffer_size, large_buffer_size;
 #ifdef STATS
-	unsigned long sbp_allocs;
-	unsigned long lbp_allocs;
 	unsigned long total_allocs;
 	unsigned long map_op_count;
 	unsigned long bounce_count;
 #endif
+	struct dmabounce_pool	small;
+	struct dmabounce_pool	large;
 };
 
 static LIST_HEAD(dmabounce_devs);
@@ -82,9 +87,9 @@ static void print_alloc_stats(struct dmabounce_device_info *device_info)
 	printk(KERN_INFO
 		"%s: dmabounce: sbp: %lu, lbp: %lu, other: %lu, total: %lu\n",
 		device_info->dev->bus_id,
-		device_info->sbp_allocs, device_info->lbp_allocs,
-		device_info->total_allocs - device_info->sbp_allocs -
-			device_info->lbp_allocs,
+		device_info->small.allocs, device_info->large.allocs,
+		device_info->total_allocs - device_info->small.allocs -
+			device_info->large.allocs,
 		device_info->total_allocs);
 }
 #endif
@@ -106,18 +111,22 @@ find_dmabounce_dev(struct device *dev)
 /* allocate a 'safe' buffer and keep track of it */
 static inline struct safe_buffer *
 alloc_safe_buffer(struct dmabounce_device_info *device_info, void *ptr,
-			size_t size, enum dma_data_direction dir)
+		  size_t size, enum dma_data_direction dir)
 {
 	struct safe_buffer *buf;
-	struct dma_pool *pool;
+	struct dmabounce_pool *pool;
 	struct device *dev = device_info->dev;
-	void *safe;
-	dma_addr_t safe_dma_addr;
 
 	dev_dbg(dev, "%s(ptr=%p, size=%d, dir=%d)\n",
 		__func__, ptr, size, dir);
 
-	DO_STATS ( device_info->total_allocs++ );
+	if (size <= device_info->small.size) {
+		pool = &device_info->small;
+	} else if (size <= device_info->large.size) {
+		pool = &device_info->large;
+	} else {
+		pool = NULL;
+	}
 
 	buf = kmalloc(sizeof(struct safe_buffer), GFP_ATOMIC);
 	if (buf == NULL) {
@@ -125,41 +134,35 @@ alloc_safe_buffer(struct dmabounce_device_info *device_info, void *ptr,
 		return NULL;
 	}
 
-	if (size <= device_info->small_buffer_size) {
-		pool = device_info->small_buffer_pool;
-		safe = dma_pool_alloc(pool, GFP_ATOMIC, &safe_dma_addr);
-
-		DO_STATS ( device_info->sbp_allocs++ );
-	} else if (size <= device_info->large_buffer_size) {
-		pool = device_info->large_buffer_pool;
-		safe = dma_pool_alloc(pool, GFP_ATOMIC, &safe_dma_addr);
+	buf->ptr = ptr;
+	buf->size = size;
+	buf->direction = dir;
+	buf->pool = pool;
 
-		DO_STATS ( device_info->lbp_allocs++ );
+	if (pool) {
+		buf->safe = dma_pool_alloc(pool->pool, GFP_ATOMIC,
+					   &buf->safe_dma_addr);
 	} else {
-		pool = NULL;
-		safe = dma_alloc_coherent(dev, size, &safe_dma_addr, GFP_ATOMIC);
+		buf->safe = dma_alloc_coherent(dev, size, &buf->safe_dma_addr,
+					       GFP_ATOMIC);
 	}
 
-	if (safe == NULL) {
-		dev_warn(device_info->dev,
-			"%s: could not alloc dma memory (size=%d)\n",
-		       __func__, size);
+	if (buf->safe == NULL) {
+		dev_warn(dev,
+			 "%s: could not alloc dma memory (size=%d)\n",
+			 __func__, size);
 		kfree(buf);
 		return NULL;
 	}
 
 #ifdef STATS
+	if (pool)
+		pool->allocs++;
+	device_info->total_allocs++;
 	if (device_info->total_allocs % 1000 == 0)
 		print_alloc_stats(device_info);
 #endif
 
-	buf->ptr = ptr;
-	buf->size = size;
-	buf->direction = dir;
-	buf->pool = pool;
-	buf->safe = safe;
-	buf->safe_dma_addr = safe_dma_addr;
-
 	list_add(&buf->node, &device_info->safe_buffers);
 
 	return buf;
@@ -186,7 +189,7 @@ free_safe_buffer(struct dmabounce_device_info *device_info, struct safe_buffer *
 	list_del(&buf->node);
 
 	if (buf->pool)
-		dma_pool_free(buf->pool, buf->safe, buf->safe_dma_addr);
+		dma_pool_free(buf->pool->pool, buf->safe, buf->safe_dma_addr);
 	else
 		dma_free_coherent(device_info->dev, buf->size, buf->safe,
 				    buf->safe_dma_addr);
@@ -197,12 +200,10 @@ free_safe_buffer(struct dmabounce_device_info *device_info, struct safe_buffer *
 /* ************************************************** */
 
 #ifdef STATS
-
 static void print_map_stats(struct dmabounce_device_info *device_info)
 {
-	printk(KERN_INFO
-		"%s: dmabounce: map_op_count=%lu, bounce_count=%lu\n",
-		device_info->dev->bus_id,
+	dev_info(device_info->dev,
+		"dmabounce: map_op_count=%lu, bounce_count=%lu\n",
 		device_info->map_op_count, device_info->bounce_count);
 }
 #endif
@@ -258,13 +259,13 @@ map_single(struct device *dev, void *ptr, size_t size,
 				__func__, ptr, buf->safe, size);
 			memcpy(buf->safe, ptr, size);
 		}
-		consistent_sync(buf->safe, size, dir);
+		ptr = buf->safe;
 
 		dma_addr = buf->safe_dma_addr;
-	} else {
-		consistent_sync(ptr, size, dir);
 	}
 
+	consistent_sync(ptr, size, dir);
+
 	return dma_addr;
 }
 
@@ -278,7 +279,7 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 	/*
 	 * Trying to unmap an invalid mapping
 	 */
-	if (dma_addr == ~0) {
+	if (dma_mapping_error(dma_addr)) {
 		dev_err(dev, "Trying to unmap invalid mapping\n");
 		return;
 	}
@@ -570,11 +571,25 @@ dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nents,
 	local_irq_restore(flags);
 }
 
+static int
+dmabounce_init_pool(struct dmabounce_pool *pool, struct device *dev, const char *name,
+		    unsigned long size)
+{
+	pool->size = size;
+	DO_STATS(pool->allocs = 0);
+	pool->pool = dma_pool_create(name, dev, size,
+				     0 /* byte alignment */,
+				     0 /* no page-crossing issues */);
+
+	return pool->pool ? 0 : -ENOMEM;
+}
+
 int
 dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
 			unsigned long large_buffer_size)
 {
 	struct dmabounce_device_info *device_info;
+	int ret;
 
 	device_info = kmalloc(sizeof(struct dmabounce_device_info), GFP_ATOMIC);
 	if (!device_info) {
@@ -584,45 +599,31 @@ dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
 		return -ENOMEM;
 	}
 
-	device_info->small_buffer_pool =
-		dma_pool_create("small_dmabounce_pool",
-				dev,
-				small_buffer_size,
-				0 /* byte alignment */,
-				0 /* no page-crossing issues */);
-	if (!device_info->small_buffer_pool) {
-		printk(KERN_ERR
-			"dmabounce: could not allocate small DMA pool for %s\n",
-			dev->bus_id);
-		kfree(device_info);
-		return -ENOMEM;
+	ret = dmabounce_init_pool(&device_info->small, dev,
+				  "small_dmabounce_pool", small_buffer_size);
+	if (ret) {
+		dev_err(dev,
+			"dmabounce: could not allocate DMA pool for %ld byte objects\n",
+			small_buffer_size);
+		goto err_free;
 	}
 
 	if (large_buffer_size) {
-		device_info->large_buffer_pool =
-			dma_pool_create("large_dmabounce_pool",
-					dev,
-					large_buffer_size,
-					0 /* byte alignment */,
-					0 /* no page-crossing issues */);
-		if (!device_info->large_buffer_pool) {
-		printk(KERN_ERR
-			"dmabounce: could not allocate large DMA pool for %s\n",
-			dev->bus_id);
-			dma_pool_destroy(device_info->small_buffer_pool);
-
-			return -ENOMEM;
+		ret = dmabounce_init_pool(&device_info->large, dev,
+					  "large_dmabounce_pool",
+					  large_buffer_size);
+		if (ret) {
+			dev_err(dev,
+				"dmabounce: could not allocate DMA pool for %ld byte objects\n",
+				large_buffer_size);
+			goto err_destroy;
 		}
 	}
 
 	device_info->dev = dev;
-	device_info->small_buffer_size = small_buffer_size;
-	device_info->large_buffer_size = large_buffer_size;
 	INIT_LIST_HEAD(&device_info->safe_buffers);
 
 #ifdef STATS
-	device_info->sbp_allocs = 0;
-	device_info->lbp_allocs = 0;
 	device_info->total_allocs = 0;
 	device_info->map_op_count = 0;
 	device_info->bounce_count = 0;
@@ -634,6 +635,12 @@ dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
 		dev->bus_id, dev->bus->name);
 
 	return 0;
+
+ err_destroy:
+	dma_pool_destroy(device_info->small.pool);
+ err_free:
+	kfree(device_info);
+	return ret;
 }
 
 void
@@ -655,10 +662,10 @@ dmabounce_unregister_dev(struct device *dev)
 		BUG();
 	}
 
-	if (device_info->small_buffer_pool)
-		dma_pool_destroy(device_info->small_buffer_pool);
-	if (device_info->large_buffer_pool)
-		dma_pool_destroy(device_info->large_buffer_pool);
+	if (device_info->small.pool)
+		dma_pool_destroy(device_info->small.pool);
+	if (device_info->large.pool)
+		dma_pool_destroy(device_info->large.pool);
 
 #ifdef STATS
 	print_alloc_stats(device_info);
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index d74990717559..c02dc8116a18 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -68,6 +68,7 @@ static void gic_unmask_irq(unsigned int irq)
 	writel(mask, gic_dist_base + GIC_DIST_ENABLE_SET + (irq / 32) * 4);
 }
 
+#ifdef CONFIG_SMP
 static void gic_set_cpu(struct irqdesc *desc, unsigned int irq, unsigned int cpu)
 {
 	void __iomem *reg = gic_dist_base + GIC_DIST_TARGET + (irq & ~3);
@@ -78,6 +79,7 @@ static void gic_set_cpu(struct irqdesc *desc, unsigned int irq, unsigned int cpu
 	val |= 1 << (cpu + shift);
 	writel(val, reg);
 }
+#endif
 
 static struct irqchip gic_chip = {
 	.ack		= gic_ack_irq,
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index a7bd85700152..1b7eaab02b9e 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -22,12 +22,11 @@
 #include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/ioport.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 
 #include <asm/hardware.h>
-#include <asm/mach-types.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
@@ -551,20 +550,17 @@ struct locomo_save_data {
 	u16	LCM_SPIMD;
 };
 
-static int locomo_suspend(struct device *dev, pm_message_t state, u32 level)
+static int locomo_suspend(struct platform_device *dev, pm_message_t state)
 {
-	struct locomo *lchip = dev_get_drvdata(dev);
+	struct locomo *lchip = platform_get_drvdata(dev);
 	struct locomo_save_data *save;
 	unsigned long flags;
 
-	if (level != SUSPEND_DISABLE)
-		return 0;
-
 	save = kmalloc(sizeof(struct locomo_save_data), GFP_KERNEL);
 	if (!save)
 		return -ENOMEM;
 
-	dev->power.saved_state = (void *) save;
+	dev->dev.power.saved_state = (void *) save;
 
 	spin_lock_irqsave(&lchip->lock, flags);
 
@@ -598,17 +594,14 @@ static int locomo_suspend(struct device *dev, pm_message_t state, u32 level)
 	return 0;
 }
 
-static int locomo_resume(struct device *dev, u32 level)
+static int locomo_resume(struct platform_device *dev)
 {
-	struct locomo *lchip = dev_get_drvdata(dev);
+	struct locomo *lchip = platform_get_drvdata(dev);
 	struct locomo_save_data *save;
 	unsigned long r;
 	unsigned long flags;
 	
-	if (level != RESUME_ENABLE)
-		return 0;
-
-	save = (struct locomo_save_data *) dev->power.saved_state;
+	save = (struct locomo_save_data *) dev->dev.power.saved_state;
 	if (!save)
 		return 0;
 
@@ -630,8 +623,6 @@ static int locomo_resume(struct device *dev, u32 level)
 	locomo_writel(0x1, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KCMD);
 
 	spin_unlock_irqrestore(&lchip->lock, flags);
-
-	dev->power.saved_state = NULL;
 	kfree(save);
 
 	return 0;
@@ -767,27 +758,26 @@ static void __locomo_remove(struct locomo *lchip)
 	kfree(lchip);
 }
 
-static int locomo_probe(struct device *dev)
+static int locomo_probe(struct platform_device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
 	struct resource *mem;
 	int irq;
 
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
 	if (!mem)
 		return -EINVAL;
-	irq = platform_get_irq(pdev, 0);
+	irq = platform_get_irq(dev, 0);
 
-	return __locomo_probe(dev, mem, irq);
+	return __locomo_probe(&dev->dev, mem, irq);
 }
 
-static int locomo_remove(struct device *dev)
+static int locomo_remove(struct platform_device *dev)
 {
-	struct locomo *lchip = dev_get_drvdata(dev);
+	struct locomo *lchip = platform_get_drvdata(dev);
 
 	if (lchip) {
 		__locomo_remove(lchip);
-		dev_set_drvdata(dev, NULL);
+		platform_set_drvdata(dev, NULL);
 	}
 
 	return 0;
@@ -799,15 +789,16 @@ static int locomo_remove(struct device *dev)
  *	the per-machine level, and then have this driver pick
  *	up the registered devices.
  */
-static struct device_driver locomo_device_driver = {
-	.name		= "locomo",
-	.bus		= &platform_bus_type,
+static struct platform_driver locomo_device_driver = {
 	.probe		= locomo_probe,
 	.remove		= locomo_remove,
 #ifdef CONFIG_PM
 	.suspend	= locomo_suspend,
 	.resume		= locomo_resume,
 #endif
+	.driver		= {
+		.name	= "locomo",
+	},
 };
 
 /*
@@ -1133,13 +1124,13 @@ static int __init locomo_init(void)
 {
 	int ret = bus_register(&locomo_bus_type);
 	if (ret == 0)
-		driver_register(&locomo_device_driver);
+		platform_driver_register(&locomo_device_driver);
 	return ret;
 }
 
 static void __exit locomo_exit(void)
 {
-	driver_unregister(&locomo_device_driver);
+	platform_driver_unregister(&locomo_device_driver);
 	bus_unregister(&locomo_bus_type);
 }
 
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 1a47fbf9cbbc..d0d6e6d2d649 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -22,7 +22,7 @@
 #include <linux/ptrace.h>
 #include <linux/errno.h>
 #include <linux/ioport.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/dma-mapping.h>
@@ -32,6 +32,7 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
+#include <asm/sizes.h>
 
 #include <asm/hardware/sa1111.h>
 
@@ -132,6 +133,17 @@ static struct sa1111_dev_info sa1111_devices[] = {
 	},
 };
 
+void __init sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes)
+{
+	unsigned int sz = SZ_1M >> PAGE_SHIFT;
+
+	if (node != 0)
+		sz = 0;
+
+	size[1] = size[0] - sz;
+	size[0] = sz;
+}
+
 /*
  * SA1111 interrupt support.  Since clearing an IRQ while there are
  * active IRQs causes the interrupt output to pulse, the upper levels
@@ -801,21 +813,18 @@ struct sa1111_save_data {
 
 #ifdef CONFIG_PM
 
-static int sa1111_suspend(struct device *dev, pm_message_t state, u32 level)
+static int sa1111_suspend(struct platform_device *dev, pm_message_t state)
 {
-	struct sa1111 *sachip = dev_get_drvdata(dev);
+	struct sa1111 *sachip = platform_get_drvdata(dev);
 	struct sa1111_save_data *save;
 	unsigned long flags;
 	unsigned int val;
 	void __iomem *base;
 
-	if (level != SUSPEND_DISABLE)
-		return 0;
-
 	save = kmalloc(sizeof(struct sa1111_save_data), GFP_KERNEL);
 	if (!save)
 		return -ENOMEM;
-	dev->power.saved_state = save;
+	dev->dev.power.saved_state = save;
 
 	spin_lock_irqsave(&sachip->lock, flags);
 
@@ -856,24 +865,20 @@ static int sa1111_suspend(struct device *dev, pm_message_t state, u32 level)
 /*
  *	sa1111_resume - Restore the SA1111 device state.
  *	@dev: device to restore
- *	@level: resume level
  *
  *	Restore the general state of the SA1111; clock control and
  *	interrupt controller.  Other parts of the SA1111 must be
  *	restored by their respective drivers, and must be called
  *	via LDM after this function.
  */
-static int sa1111_resume(struct device *dev, u32 level)
+static int sa1111_resume(struct platform_device *dev)
 {
-	struct sa1111 *sachip = dev_get_drvdata(dev);
+	struct sa1111 *sachip = platform_get_drvdata(dev);
 	struct sa1111_save_data *save;
 	unsigned long flags, id;
 	void __iomem *base;
 
-	if (level != RESUME_ENABLE)
-		return 0;
-
-	save = (struct sa1111_save_data *)dev->power.saved_state;
+	save = (struct sa1111_save_data *)dev->dev.power.saved_state;
 	if (!save)
 		return 0;
 
@@ -886,7 +891,7 @@ static int sa1111_resume(struct device *dev, u32 level)
 	id = sa1111_readl(sachip->base + SA1111_SKID);
 	if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
 		__sa1111_remove(sachip);
-		dev_set_drvdata(dev, NULL);
+		platform_set_drvdata(dev, NULL);
 		kfree(save);
 		return 0;
 	}
@@ -918,7 +923,7 @@ static int sa1111_resume(struct device *dev, u32 level)
 
 	spin_unlock_irqrestore(&sachip->lock, flags);
 
-	dev->power.saved_state = NULL;
+	dev->dev.power.saved_state = NULL;
 	kfree(save);
 
 	return 0;
@@ -929,9 +934,8 @@ static int sa1111_resume(struct device *dev, u32 level)
 #define sa1111_resume  NULL
 #endif
 
-static int sa1111_probe(struct device *dev)
+static int sa1111_probe(struct platform_device *pdev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
 	struct resource *mem;
 	int irq;
 
@@ -940,20 +944,20 @@ static int sa1111_probe(struct device *dev)
 		return -EINVAL;
 	irq = platform_get_irq(pdev, 0);
 
-	return __sa1111_probe(dev, mem, irq);
+	return __sa1111_probe(&pdev->dev, mem, irq);
 }
 
-static int sa1111_remove(struct device *dev)
+static int sa1111_remove(struct platform_device *pdev)
 {
-	struct sa1111 *sachip = dev_get_drvdata(dev);
+	struct sa1111 *sachip = platform_get_drvdata(pdev);
 
 	if (sachip) {
 		__sa1111_remove(sachip);
-		dev_set_drvdata(dev, NULL);
+		platform_set_drvdata(pdev, NULL);
 
 #ifdef CONFIG_PM
-		kfree(dev->power.saved_state);
-		dev->power.saved_state = NULL;
+		kfree(pdev->dev.power.saved_state);
+		pdev->dev.power.saved_state = NULL;
 #endif
 	}
 
@@ -969,13 +973,14 @@ static int sa1111_remove(struct device *dev)
  *	We also need to handle the SDRAM configuration for
  *	PXA250/SA1110 machine classes.
  */
-static struct device_driver sa1111_device_driver = {
-	.name		= "sa1111",
-	.bus		= &platform_bus_type,
+static struct platform_driver sa1111_device_driver = {
 	.probe		= sa1111_probe,
 	.remove		= sa1111_remove,
 	.suspend	= sa1111_suspend,
 	.resume		= sa1111_resume,
+	.driver		= {
+		.name	= "sa1111",
+	},
 };
 
 /*
@@ -1263,17 +1268,17 @@ static int __init sa1111_init(void)
 {
 	int ret = bus_register(&sa1111_bus_type);
 	if (ret == 0)
-		driver_register(&sa1111_device_driver);
+		platform_driver_register(&sa1111_device_driver);
 	return ret;
 }
 
 static void __exit sa1111_exit(void)
 {
-	driver_unregister(&sa1111_device_driver);
+	platform_driver_unregister(&sa1111_device_driver);
 	bus_unregister(&sa1111_bus_type);
 }
 
-module_init(sa1111_init);
+subsys_initcall(sa1111_init);
 module_exit(sa1111_exit);
 
 MODULE_DESCRIPTION("Intel Corporation SA1111 core driver");
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index d3a04c2a2c85..0c3cbd9a388b 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -12,20 +12,18 @@
  */
 
 #include <linux/device.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
 #include <asm/io.h>
 #include <asm/hardware/scoop.h>
 
 #define SCOOP_REG(d,adr) (*(volatile unsigned short*)(d +(adr)))
 
-/* PCMCIA to Scoop linkage structures for pxa2xx_sharpsl.c
-   There is no easy way to link multiple scoop devices into one
-   single entity for the pxa2xx_pcmcia device */
-int scoop_num;
-struct scoop_pcmcia_dev *scoop_devs;
-
 struct  scoop_dev {
 	void  *base;
 	spinlock_t scoop_lock;
+	unsigned short suspend_clr;
+	unsigned short suspend_set;
 	u32 scoop_gpwr;
 };
 
@@ -90,25 +88,34 @@ EXPORT_SYMBOL(reset_scoop);
 EXPORT_SYMBOL(read_scoop_reg);
 EXPORT_SYMBOL(write_scoop_reg);
 
+static void check_scoop_reg(struct scoop_dev *sdev)
+{
+	unsigned short mcr;
+
+	mcr = SCOOP_REG(sdev->base, SCOOP_MCR);
+	if ((mcr & 0x100) == 0)
+		SCOOP_REG(sdev->base, SCOOP_MCR) = 0x0101;
+}
+
 #ifdef CONFIG_PM
-static int scoop_suspend(struct device *dev, pm_message_t state, uint32_t level)
+static int scoop_suspend(struct platform_device *dev, pm_message_t state)
 {
-	if (level == SUSPEND_POWER_DOWN) {
-		struct scoop_dev *sdev = dev_get_drvdata(dev);
+	struct scoop_dev *sdev = platform_get_drvdata(dev);
+
+	check_scoop_reg(sdev);
+	sdev->scoop_gpwr = SCOOP_REG(sdev->base, SCOOP_GPWR);
+	SCOOP_REG(sdev->base, SCOOP_GPWR) = (sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set;
 
-		sdev->scoop_gpwr = SCOOP_REG(sdev->base,SCOOP_GPWR);
-		SCOOP_REG(sdev->base,SCOOP_GPWR) = 0;
-	}
 	return 0;
 }
 
-static int scoop_resume(struct device *dev, uint32_t level)
+static int scoop_resume(struct platform_device *dev)
 {
-	if (level == RESUME_POWER_ON) {
-		struct scoop_dev *sdev = dev_get_drvdata(dev);
+	struct scoop_dev *sdev = platform_get_drvdata(dev);
+
+	check_scoop_reg(sdev);
+	SCOOP_REG(sdev->base,SCOOP_GPWR) = sdev->scoop_gpwr;
 
-		SCOOP_REG(sdev->base,SCOOP_GPWR) = sdev->scoop_gpwr;
-	}
 	return 0;
 }
 #else
@@ -116,11 +123,10 @@ static int scoop_resume(struct device *dev, uint32_t level)
 #define scoop_resume	NULL
 #endif
 
-int __init scoop_probe(struct device *dev)
+int __init scoop_probe(struct platform_device *pdev)
 {
 	struct scoop_dev *devptr;
 	struct scoop_config *inf;
-	struct platform_device *pdev = to_platform_device(dev);
 	struct resource *mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
 	if (!mem)
@@ -134,7 +140,7 @@ int __init scoop_probe(struct device *dev)
 	memset(devptr, 0, sizeof(struct scoop_dev));
 	spin_lock_init(&devptr->scoop_lock);
 
-	inf = dev->platform_data;
+	inf = pdev->dev.platform_data;
 	devptr->base = ioremap(mem->start, mem->end - mem->start + 1);
 
 	if (!devptr->base) {
@@ -142,41 +148,45 @@ int __init scoop_probe(struct device *dev)
 		return -ENOMEM;
 	}
 
-	dev_set_drvdata(dev, devptr);
+	platform_set_drvdata(pdev, devptr);
 
 	printk("Sharp Scoop Device found at 0x%08x -> 0x%08x\n",(unsigned int)mem->start,(unsigned int)devptr->base);
 
 	SCOOP_REG(devptr->base, SCOOP_MCR) = 0x0140;
-	reset_scoop(dev);
+	reset_scoop(&pdev->dev);
 	SCOOP_REG(devptr->base, SCOOP_GPCR) = inf->io_dir & 0xffff;
 	SCOOP_REG(devptr->base, SCOOP_GPWR) = inf->io_out & 0xffff;
 
+	devptr->suspend_clr = inf->suspend_clr;
+	devptr->suspend_set = inf->suspend_set;
+
 	return 0;
 }
 
-static int scoop_remove(struct device *dev)
+static int scoop_remove(struct platform_device *pdev)
 {
-	struct scoop_dev *sdev = dev_get_drvdata(dev);
+	struct scoop_dev *sdev = platform_get_drvdata(pdev);
 	if (sdev) {
 		iounmap(sdev->base);
 		kfree(sdev);
-		dev_set_drvdata(dev, NULL);
+		platform_set_drvdata(pdev, NULL);
 	}
 	return 0;
 }
 
-static struct device_driver scoop_driver = {
-	.name		= "sharp-scoop",
-	.bus		= &platform_bus_type,
+static struct platform_driver scoop_driver = {
 	.probe		= scoop_probe,
 	.remove 	= scoop_remove,
 	.suspend	= scoop_suspend,
 	.resume		= scoop_resume,
+	.driver		= {
+		.name	= "sharp-scoop",
+	},
 };
 
 int __init scoop_init(void)
 {
-	return driver_register(&scoop_driver);
+	return platform_driver_register(&scoop_driver);
 }
 
 subsys_initcall(scoop_init);
diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
new file mode 100644
index 000000000000..40dfe07a8bce
--- /dev/null
+++ b/arch/arm/configs/collie_defconfig
@@ -0,0 +1,888 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc3
+# Sun Oct  9 16:55:14 2005
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+# CONFIG_CLEAN_COMPILE is not set
+CONFIG_BROKEN=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+CONFIG_ARCH_SA1100=y
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+
+#
+# SA11x0 Implementations
+#
+# CONFIG_SA1100_ASSABET is not set
+# CONFIG_SA1100_CERF is not set
+CONFIG_SA1100_COLLIE=y
+# CONFIG_SA1100_H3100 is not set
+# CONFIG_SA1100_H3600 is not set
+# CONFIG_SA1100_H3800 is not set
+# CONFIG_SA1100_BADGE4 is not set
+# CONFIG_SA1100_JORNADA720 is not set
+# CONFIG_SA1100_HACKKIT is not set
+# CONFIG_SA1100_LART is not set
+# CONFIG_SA1100_PLEB is not set
+# CONFIG_SA1100_SHANNON is not set
+# CONFIG_SA1100_SIMPAD is not set
+# CONFIG_SA1100_SSP is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_SA1100=y
+CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_EV4=y
+CONFIG_CPU_CACHE_V4WB=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WB=y
+
+#
+# Processor Features
+#
+CONFIG_SHARP_LOCOMO=y
+CONFIG_SHARP_PARAM=y
+CONFIG_SHARP_SCOOP=y
+
+#
+# Bus support
+#
+CONFIG_ISA=y
+CONFIG_ISA_DMA_API=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_SMP is not set
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_APM=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_OBSOLETE_CHIPS=y
+# CONFIG_MTD_AMDSTD is not set
+CONFIG_MTD_SHARP=y
+# CONFIG_MTD_JEDEC is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_XD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=m
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+# CONFIG_NETDEVICES is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=240
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_LOCOMO=y
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SA1100=y
+CONFIG_SERIAL_SA1100_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+CONFIG_I2C=m
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=m
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ELEKTOR is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+# CONFIG_MCP_SA11X0 is not set
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+
+#
+# Video For Linux
+#
+
+#
+# Video Adapters
+#
+# CONFIG_VIDEO_PMS is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_GEMTEK is not set
+# CONFIG_RADIO_MAESTRO is not set
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_SA1100=y
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB is not set
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_WAITQ is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig
new file mode 100644
index 000000000000..06229026f78b
--- /dev/null
+++ b/arch/arm/configs/corgi_defconfig
@@ -0,0 +1,1568 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.15-rc2
+# Mon Nov 28 10:30:09 2005
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_L7200 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+
+#
+# Intel PXA2xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+CONFIG_PXA_SHARPSL=y
+CONFIG_PXA_SHARPSL_25x=y
+# CONFIG_PXA_SHARPSL_27x is not set
+CONFIG_MACH_POODLE=y
+CONFIG_MACH_CORGI=y
+CONFIG_MACH_SHEPHERD=y
+CONFIG_MACH_HUSKY=y
+CONFIG_MACH_TOSA=y
+CONFIG_PXA25x=y
+CONFIG_PXA_SHARP_C7xx=y
+CONFIG_PXA_SSP=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_XSCALE_PMU=y
+CONFIG_SHARP_PARAM=y
+CONFIG_SHARP_SCOOP=y
+
+#
+# Bus support
+#
+CONFIG_ISA_DMA_API=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+CONFIG_PCMCIA_PXA2XX=y
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_APM=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+CONFIG_IP_NF_CT_PROTO_SCTP=m
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_REALM=m
+CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
+CONFIG_IP_NF_MATCH_COMMENT=m
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
+# CONFIG_IP_NF_MATCH_STRING is not set
+CONFIG_IP_NF_FILTER=m
+# CONFIG_IP_NF_TARGET_REJECT is not set
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+# CONFIG_IP_NF_TARGET_MASQUERADE is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_SAME is not set
+# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+# CONFIG_IP_NF_TARGET_TOS is not set
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_DSCP is not set
+# CONFIG_IP_NF_TARGET_MARK is not set
+# CONFIG_IP_NF_TARGET_CLASSIFY is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_TARGET_NOTRACK is not set
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_LIMIT=m
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_MULTIPORT=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_MARK=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AHESP=m
+CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+# CONFIG_IP6_NF_TARGET_LOG is not set
+# CONFIG_IP6_NF_TARGET_REJECT is not set
+# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP6_NF_TARGET_MARK is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+CONFIG_IP6_NF_RAW=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_NSC_FIR is not set
+# CONFIG_WINBOND_FIR is not set
+# CONFIG_SMC_IRCC_FIR is not set
+# CONFIG_ALI_FIR is not set
+# CONFIG_VIA_FIR is not set
+CONFIG_PXA_FICP=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+# CONFIG_BT_HCIUSB_SCO is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+# CONFIG_IEEE80211_CRYPT_CCMP is not set
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_ROM=y
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_SHARP_SL=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_SHARPSL=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+CONFIG_HERMES=m
+# CONFIG_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_CS=m
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+CONFIG_NET_PCMCIA=y
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+CONFIG_PCMCIA_PCNET=m
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_CORGI=y
+CONFIG_KEYBOARD_SPITZ=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_CORGI=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+
+#
+# Video For Linux
+#
+
+#
+# Video Adapters
+#
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_VIDEO_AUDIO_DECODER is not set
+# CONFIG_VIDEO_DECODER is not set
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_MAESTRO is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_PXA is not set
+CONFIG_FB_W100=y
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_DEVICE=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CORGI=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+# CONFIG_SND is not set
+
+#
+# Open Sound System
+#
+CONFIG_SOUND_PRIME=y
+# CONFIG_SOUND_MSNDCLAS is not set
+# CONFIG_SOUND_MSNDPIN is not set
+CONFIG_SOUND_OSS=y
+# CONFIG_SOUND_TRACEINIT is not set
+# CONFIG_SOUND_DMAP is not set
+# CONFIG_SOUND_AD1816 is not set
+# CONFIG_SOUND_SGALAXY is not set
+# CONFIG_SOUND_ADLIB is not set
+# CONFIG_SOUND_ACI_MIXER is not set
+# CONFIG_SOUND_CS4232 is not set
+# CONFIG_SOUND_SSCAPE is not set
+# CONFIG_SOUND_GUS is not set
+# CONFIG_SOUND_VMIDI is not set
+# CONFIG_SOUND_TRIX is not set
+# CONFIG_SOUND_MSS is not set
+# CONFIG_SOUND_MPU401 is not set
+# CONFIG_SOUND_NM256 is not set
+# CONFIG_SOUND_MAD16 is not set
+# CONFIG_SOUND_PAS is not set
+# CONFIG_SOUND_PSS is not set
+# CONFIG_SOUND_SB is not set
+# CONFIG_SOUND_AWE32_SYNTH is not set
+# CONFIG_SOUND_WAVEFRONT is not set
+# CONFIG_SOUND_MAUI is not set
+# CONFIG_SOUND_YM3812 is not set
+# CONFIG_SOUND_OPL3SA1 is not set
+# CONFIG_SOUND_OPL3SA2 is not set
+# CONFIG_SOUND_UART6850 is not set
+# CONFIG_SOUND_AEDSP16 is not set
+# CONFIG_SOUND_TVMIXER is not set
+# CONFIG_SOUND_AD1980 is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_SL811_HCD=m
+CONFIG_USB_SL811_CS=m
+
+#
+# USB Device Class drivers
+#
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
+CONFIG_USB_AIPTEK=m
+CONFIG_USB_WACOM=m
+# CONFIG_USB_ACECAD is not set
+CONFIG_USB_KBTAB=m
+CONFIG_USB_POWERMATE=m
+CONFIG_USB_MTOUCH=m
+# CONFIG_USB_ITMTOUCH is not set
+CONFIG_USB_EGALAX=m
+# CONFIG_USB_YEALINK is not set
+CONFIG_USB_XPAD=m
+CONFIG_USB_ATI_REMOTE=m
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB Multimedia devices
+#
+CONFIG_USB_DABUSB=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_DSBR=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+# CONFIG_USB_PWC is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_ZD1201 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ANYDATA is not set
+CONFIG_USB_SERIAL_BELKIN=m
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP2101 is not set
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_HP4X is not set
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_EZUSB=y
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_AUERSWALD=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_PHIDGETKIT=m
+CONFIG_USB_PHIDGETSERVO=m
+CONFIG_USB_IDMOUSE=m
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+CONFIG_USB_GADGET_PXA2XX=y
+CONFIG_USB_PXA2XX=y
+# CONFIG_USB_PXA2XX_SMALL is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_WBSD is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_WAITQ is not set
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/enp2611_defconfig b/arch/arm/configs/enp2611_defconfig
index 30e6444f9aaa..fd7c0042bcca 100644
--- a/arch/arm/configs/enp2611_defconfig
+++ b/arch/arm/configs/enp2611_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13
-# Wed Sep 14 10:51:52 2005
+# Linux kernel version: 2.6.14-git13
+# Thu Nov 10 15:12:48 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
@@ -31,6 +32,7 @@ CONFIG_SYSCTL=y
 # CONFIG_HOTPLUG is not set
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
@@ -61,6 +63,23 @@ CONFIG_OBSOLETE_MODPARM=y
 CONFIG_KMOD=y
 
 #
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # System Type
 #
 # CONFIG_ARCH_CLPS7500 is not set
@@ -82,6 +101,7 @@ CONFIG_ARCH_IXP2000=y
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
@@ -124,7 +144,6 @@ CONFIG_XSCALE_PMU=y
 CONFIG_ISA_DMA_API=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -144,6 +163,8 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -162,6 +183,7 @@ CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmw
 # At least one emulation must be selected
 #
 CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
 # CONFIG_FPE_FASTFPE is not set
 
 #
@@ -205,14 +227,19 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
 #
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
@@ -228,6 +255,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -238,6 +269,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -273,6 +305,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -307,7 +340,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_PHYSMAP is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_IXP2000=y
-# CONFIG_MTD_EDB7312 is not set
 # CONFIG_MTD_PCI is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -334,6 +366,11 @@ CONFIG_MTD_IXP2000=y
 # CONFIG_MTD_NAND is not set
 
 #
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
 # Parallel port support
 #
 # CONFIG_PARPORT is not set
@@ -358,21 +395,13 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 
 #
@@ -410,12 +439,18 @@ CONFIG_DUMMY=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
@@ -455,6 +490,7 @@ CONFIG_EEPRO100=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
@@ -464,6 +500,7 @@ CONFIG_EEPRO100=y
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -609,6 +646,7 @@ CONFIG_IXP2000_WATCHDOG=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -634,7 +672,6 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
 CONFIG_I2C_IXP2000=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
@@ -649,7 +686,6 @@ CONFIG_I2C_IXP2000=y
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
-CONFIG_I2C_SENSOR=y
 
 #
 # Miscellaneous I2C Chip support
@@ -662,6 +698,7 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -671,6 +708,7 @@ CONFIG_SENSORS_EEPROM=y
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -701,6 +739,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
@@ -711,6 +750,10 @@ CONFIG_HWMON=y
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -738,6 +781,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
 #
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
@@ -765,10 +812,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -777,6 +820,7 @@ CONFIG_INOTIFY=y
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -796,11 +840,10 @@ CONFIG_DNOTIFY=y
 #
 CONFIG_PROC_FS=y
 CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -816,6 +859,7 @@ CONFIG_RAMFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@@ -848,6 +892,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -886,6 +931,7 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -894,7 +940,9 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
@@ -920,6 +968,7 @@ CONFIG_DEBUG_LL=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/ixdp2400_defconfig b/arch/arm/configs/ixdp2400_defconfig
index 678720fa2e2e..e6a4d2656fe5 100644
--- a/arch/arm/configs/ixdp2400_defconfig
+++ b/arch/arm/configs/ixdp2400_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13
-# Wed Sep 14 10:52:01 2005
+# Linux kernel version: 2.6.14-git13
+# Thu Nov 10 15:14:13 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
@@ -31,6 +32,7 @@ CONFIG_SYSCTL=y
 # CONFIG_HOTPLUG is not set
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
@@ -61,6 +63,23 @@ CONFIG_OBSOLETE_MODPARM=y
 CONFIG_KMOD=y
 
 #
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # System Type
 #
 # CONFIG_ARCH_CLPS7500 is not set
@@ -82,6 +101,7 @@ CONFIG_ARCH_IXP2000=y
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
@@ -125,7 +145,6 @@ CONFIG_XSCALE_PMU=y
 CONFIG_ISA_DMA_API=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -145,6 +164,8 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -163,6 +184,7 @@ CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmw
 # At least one emulation must be selected
 #
 CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
 # CONFIG_FPE_FASTFPE is not set
 
 #
@@ -206,14 +228,19 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
 #
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
@@ -229,6 +256,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -239,6 +270,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -274,6 +306,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -308,7 +341,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_PHYSMAP is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_IXP2000=y
-# CONFIG_MTD_EDB7312 is not set
 # CONFIG_MTD_PCI is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -335,6 +367,11 @@ CONFIG_MTD_IXP2000=y
 # CONFIG_MTD_NAND is not set
 
 #
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
 # Parallel port support
 #
 # CONFIG_PARPORT is not set
@@ -359,21 +396,13 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 
 #
@@ -411,12 +440,18 @@ CONFIG_DUMMY=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
@@ -456,6 +491,7 @@ CONFIG_EEPRO100=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
@@ -465,6 +501,7 @@ CONFIG_EEPRO100=y
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -559,7 +596,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_NR_UARTS=1
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -610,6 +647,7 @@ CONFIG_IXP2000_WATCHDOG=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -635,7 +673,6 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
 CONFIG_I2C_IXP2000=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
@@ -650,7 +687,6 @@ CONFIG_I2C_IXP2000=y
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
-CONFIG_I2C_SENSOR=y
 
 #
 # Miscellaneous I2C Chip support
@@ -663,6 +699,7 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -672,6 +709,7 @@ CONFIG_SENSORS_EEPROM=y
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -702,6 +740,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
@@ -712,6 +751,10 @@ CONFIG_HWMON=y
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -739,6 +782,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
 #
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
@@ -766,10 +813,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -778,6 +821,7 @@ CONFIG_INOTIFY=y
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -797,11 +841,10 @@ CONFIG_DNOTIFY=y
 #
 CONFIG_PROC_FS=y
 CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -817,6 +860,7 @@ CONFIG_RAMFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@@ -849,6 +893,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -887,6 +932,7 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -895,7 +941,9 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
@@ -921,6 +969,7 @@ CONFIG_DEBUG_LL=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/ixdp2401_defconfig b/arch/arm/configs/ixdp2401_defconfig
index 38c9a721d5c9..5572cf95d5f8 100644
--- a/arch/arm/configs/ixdp2401_defconfig
+++ b/arch/arm/configs/ixdp2401_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13
-# Wed Sep 14 10:52:10 2005
+# Linux kernel version: 2.6.14-git13
+# Thu Nov 10 15:14:50 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
@@ -31,6 +32,7 @@ CONFIG_SYSCTL=y
 # CONFIG_HOTPLUG is not set
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
@@ -61,6 +63,23 @@ CONFIG_OBSOLETE_MODPARM=y
 CONFIG_KMOD=y
 
 #
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # System Type
 #
 # CONFIG_ARCH_CLPS7500 is not set
@@ -82,6 +101,7 @@ CONFIG_ARCH_IXP2000=y
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
@@ -125,7 +145,6 @@ CONFIG_XSCALE_PMU=y
 CONFIG_ISA_DMA_API=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -145,6 +164,8 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -152,7 +173,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware"
+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware"
 # CONFIG_XIP_KERNEL is not set
 
 #
@@ -163,6 +184,7 @@ CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmw
 # At least one emulation must be selected
 #
 CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
 # CONFIG_FPE_FASTFPE is not set
 
 #
@@ -206,14 +228,19 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
 #
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
@@ -229,6 +256,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -239,6 +270,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -274,6 +306,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -308,7 +341,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_PHYSMAP is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_IXP2000=y
-# CONFIG_MTD_EDB7312 is not set
 # CONFIG_MTD_PCI is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -335,6 +367,11 @@ CONFIG_MTD_IXP2000=y
 # CONFIG_MTD_NAND is not set
 
 #
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
 # Parallel port support
 #
 # CONFIG_PARPORT is not set
@@ -359,21 +396,13 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 
 #
@@ -411,12 +440,18 @@ CONFIG_DUMMY=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
@@ -457,6 +492,7 @@ CONFIG_EEPRO100=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
@@ -466,6 +502,7 @@ CONFIG_EEPRO100=y
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -560,7 +597,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_NR_UARTS=3
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -611,6 +648,7 @@ CONFIG_IXP2000_WATCHDOG=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -636,7 +674,6 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
 CONFIG_I2C_IXP2000=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
@@ -651,7 +688,6 @@ CONFIG_I2C_IXP2000=y
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
-CONFIG_I2C_SENSOR=y
 
 #
 # Miscellaneous I2C Chip support
@@ -664,6 +700,7 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -673,6 +710,7 @@ CONFIG_SENSORS_EEPROM=y
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -703,6 +741,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
@@ -713,6 +752,10 @@ CONFIG_HWMON=y
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -740,6 +783,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
 #
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
@@ -767,10 +814,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -779,6 +822,7 @@ CONFIG_INOTIFY=y
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -798,11 +842,10 @@ CONFIG_DNOTIFY=y
 #
 CONFIG_PROC_FS=y
 CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -818,6 +861,7 @@ CONFIG_RAMFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@@ -850,6 +894,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -888,6 +933,7 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -896,7 +942,9 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
@@ -922,6 +970,7 @@ CONFIG_DEBUG_LL=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/ixdp2800_defconfig b/arch/arm/configs/ixdp2800_defconfig
index 261e2343903b..0fddbde85835 100644
--- a/arch/arm/configs/ixdp2800_defconfig
+++ b/arch/arm/configs/ixdp2800_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13
-# Wed Sep 14 10:52:23 2005
+# Linux kernel version: 2.6.14-git13
+# Thu Nov 10 15:14:56 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
@@ -31,6 +32,7 @@ CONFIG_SYSCTL=y
 # CONFIG_HOTPLUG is not set
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
@@ -61,6 +63,23 @@ CONFIG_OBSOLETE_MODPARM=y
 CONFIG_KMOD=y
 
 #
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # System Type
 #
 # CONFIG_ARCH_CLPS7500 is not set
@@ -82,6 +101,7 @@ CONFIG_ARCH_IXP2000=y
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
@@ -125,7 +145,6 @@ CONFIG_XSCALE_PMU=y
 CONFIG_ISA_DMA_API=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -145,6 +164,8 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -163,6 +184,7 @@ CONFIG_CMDLINE="console=ttyS0,9600 root=/dev/nfs ip=bootp mem=64M@0x0"
 # At least one emulation must be selected
 #
 CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
 # CONFIG_FPE_FASTFPE is not set
 
 #
@@ -206,14 +228,19 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
 #
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
@@ -229,6 +256,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -239,6 +270,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -274,6 +306,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -308,7 +341,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_PHYSMAP is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_IXP2000=y
-# CONFIG_MTD_EDB7312 is not set
 # CONFIG_MTD_PCI is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -335,6 +367,11 @@ CONFIG_MTD_IXP2000=y
 # CONFIG_MTD_NAND is not set
 
 #
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
 # Parallel port support
 #
 # CONFIG_PARPORT is not set
@@ -359,21 +396,13 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 
 #
@@ -411,12 +440,18 @@ CONFIG_DUMMY=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
@@ -456,6 +491,7 @@ CONFIG_EEPRO100=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
@@ -465,6 +501,7 @@ CONFIG_EEPRO100=y
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -559,7 +596,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_NR_UARTS=1
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -610,6 +647,7 @@ CONFIG_IXP2000_WATCHDOG=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -635,7 +673,6 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
 CONFIG_I2C_IXP2000=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
@@ -650,7 +687,6 @@ CONFIG_I2C_IXP2000=y
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
-CONFIG_I2C_SENSOR=y
 
 #
 # Miscellaneous I2C Chip support
@@ -663,6 +699,7 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -672,6 +709,7 @@ CONFIG_SENSORS_EEPROM=y
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -702,6 +740,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
@@ -712,6 +751,10 @@ CONFIG_HWMON=y
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -739,6 +782,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
 #
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
@@ -766,10 +813,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -778,6 +821,7 @@ CONFIG_INOTIFY=y
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -797,11 +841,10 @@ CONFIG_DNOTIFY=y
 #
 CONFIG_PROC_FS=y
 CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -817,6 +860,7 @@ CONFIG_RAMFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@@ -849,6 +893,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -887,6 +932,7 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -895,7 +941,9 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
@@ -921,6 +969,7 @@ CONFIG_DEBUG_LL=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/ixdp2801_defconfig b/arch/arm/configs/ixdp2801_defconfig
index 12ef23d1c016..89b9aa06aa91 100644
--- a/arch/arm/configs/ixdp2801_defconfig
+++ b/arch/arm/configs/ixdp2801_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13
-# Wed Sep 14 10:52:16 2005
+# Linux kernel version: 2.6.14-git13
+# Thu Nov 10 15:15:03 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
@@ -31,6 +32,7 @@ CONFIG_SYSCTL=y
 # CONFIG_HOTPLUG is not set
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
@@ -61,6 +63,23 @@ CONFIG_OBSOLETE_MODPARM=y
 CONFIG_KMOD=y
 
 #
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # System Type
 #
 # CONFIG_ARCH_CLPS7500 is not set
@@ -82,6 +101,7 @@ CONFIG_ARCH_IXP2000=y
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
@@ -125,7 +145,6 @@ CONFIG_XSCALE_PMU=y
 CONFIG_ISA_DMA_API=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -145,6 +164,8 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -163,6 +184,7 @@ CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firm
 # At least one emulation must be selected
 #
 CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
 # CONFIG_FPE_FASTFPE is not set
 
 #
@@ -206,14 +228,19 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
 #
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
@@ -229,6 +256,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -239,6 +270,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -274,6 +306,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -308,7 +341,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_PHYSMAP is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_IXP2000=y
-# CONFIG_MTD_EDB7312 is not set
 # CONFIG_MTD_PCI is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -335,6 +367,11 @@ CONFIG_MTD_IXP2000=y
 # CONFIG_MTD_NAND is not set
 
 #
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
 # Parallel port support
 #
 # CONFIG_PARPORT is not set
@@ -359,21 +396,13 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 
 #
@@ -411,12 +440,18 @@ CONFIG_DUMMY=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
@@ -457,6 +492,7 @@ CONFIG_EEPRO100=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
@@ -466,6 +502,7 @@ CONFIG_EEPRO100=y
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -560,7 +597,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_NR_UARTS=3
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -611,6 +648,7 @@ CONFIG_IXP2000_WATCHDOG=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -636,7 +674,6 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
 CONFIG_I2C_IXP2000=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
@@ -651,7 +688,6 @@ CONFIG_I2C_IXP2000=y
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
-CONFIG_I2C_SENSOR=y
 
 #
 # Miscellaneous I2C Chip support
@@ -664,6 +700,7 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -673,6 +710,7 @@ CONFIG_SENSORS_EEPROM=y
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -703,6 +741,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
@@ -713,6 +752,10 @@ CONFIG_HWMON=y
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -740,6 +783,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
 #
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
@@ -767,10 +814,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -779,6 +822,7 @@ CONFIG_INOTIFY=y
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -798,11 +842,10 @@ CONFIG_DNOTIFY=y
 #
 CONFIG_PROC_FS=y
 CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -818,6 +861,7 @@ CONFIG_RAMFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@@ -850,6 +894,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -888,6 +933,7 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -896,7 +942,9 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
@@ -922,6 +970,7 @@ CONFIG_DEBUG_LL=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig
index 94aafec5fb46..f74c926beb42 100644
--- a/arch/arm/configs/ixp4xx_defconfig
+++ b/arch/arm/configs/ixp4xx_defconfig
@@ -1,14 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 22:53:40 2005
+# Linux kernel version: 2.6.14-rc1-git5
+# Tue Sep 20 17:26:28 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
 CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
 
 #
 # Code maturity level options
@@ -16,11 +15,13 @@ CONFIG_GENERIC_IOMAP=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
@@ -31,10 +32,13 @@ CONFIG_SYSCTL=y
 # CONFIG_HOTPLUG is not set
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -81,6 +85,7 @@ CONFIG_ARCH_IXP4XX=y
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
 CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
 
 #
@@ -90,14 +95,15 @@ CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
 #
 # IXP4xx Platforms
 #
-# CONFIG_ARCH_AVILA is not set
+CONFIG_ARCH_AVILA=y
 CONFIG_ARCH_ADI_COYOTE=y
 CONFIG_ARCH_IXDP425=y
-# CONFIG_MACH_IXDPG425 is not set
-# CONFIG_MACH_IXDP465 is not set
+CONFIG_MACH_IXDPG425=y
+CONFIG_MACH_IXDP465=y
 CONFIG_ARCH_IXCDP1100=y
 CONFIG_ARCH_PRPMC1100=y
 CONFIG_ARCH_IXDP4XX=y
+CONFIG_CPU_IXP46X=y
 # CONFIG_MACH_GTWX5715 is not set
 
 #
@@ -114,7 +120,6 @@ CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
 
 #
 # Processor Features
@@ -127,9 +132,10 @@ CONFIG_DMABOUNCE=y
 #
 # Bus support
 #
+CONFIG_ISA_DMA_API=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -140,6 +146,15 @@ CONFIG_PCI_NAMES=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -175,6 +190,241 @@ CONFIG_PM=y
 CONFIG_APM=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=m
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_FWMARK=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+CONFIG_IP_VS=m
+CONFIG_IP_VS_DEBUG=y
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+# CONFIG_IP_VS_PROTO_TCP is not set
+# CONFIG_IP_VS_PROTO_UDP is not set
+# CONFIG_IP_VS_PROTO_ESP is not set
+# CONFIG_IP_VS_PROTO_AH is not set
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+# CONFIG_IP_VS_SED is not set
+# CONFIG_IP_VS_NQ is not set
+
+#
+# IPVS application helper
+#
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_BRIDGE_NETFILTER=y
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+# CONFIG_IP_NF_TFTP is not set
+# CONFIG_IP_NF_AMANDA is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+# CONFIG_IP_NF_MATCH_IPRANGE is not set
+CONFIG_IP_NF_MATCH_MAC=m
+# CONFIG_IP_NF_MATCH_PKTTYPE is not set
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+# CONFIG_IP_NF_MATCH_RECENT is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_DSCP is not set
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+# CONFIG_IP_NF_MATCH_HELPER is not set
+CONFIG_IP_NF_MATCH_STATE=m
+# CONFIG_IP_NF_MATCH_CONNTRACK is not set
+CONFIG_IP_NF_MATCH_OWNER=m
+# CONFIG_IP_NF_MATCH_PHYSDEV is not set
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_REALM is not set
+# CONFIG_IP_NF_MATCH_SCTP is not set
+# CONFIG_IP_NF_MATCH_DCCP is not set
+# CONFIG_IP_NF_MATCH_COMMENT is not set
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+# CONFIG_IP_NF_MATCH_STRING is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_SAME is not set
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_DSCP is not set
+CONFIG_IP_NF_TARGET_MARK=m
+# CONFIG_IP_NF_TARGET_CLASSIFY is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_RAW is not set
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+# CONFIG_IP_NF_ARP_MANGLE is not set
+
+#
+# Bridge: Netfilter Configuration
+#
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+CONFIG_ATM=y
+CONFIG_ATM_CLIP=y
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=y
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+CONFIG_X25=m
+CONFIG_LAPB=m
+# CONFIG_NET_DIVERT is not set
+CONFIG_ECONET=m
+CONFIG_ECONET_AUNUDP=y
+CONFIG_ECONET_NATIVE=y
+CONFIG_WAN_ROUTER=m
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_ATM is not set
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+# CONFIG_NET_SCH_NETEM is not set
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_QOS=y
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_CLS=y
+# CONFIG_NET_CLS_BASIC is not set
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+# CONFIG_NET_CLS_IND is not set
+# CONFIG_CLS_U32_MARK is not set
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_POLICE=y
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
 # Device Drivers
 #
 
@@ -244,6 +494,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_IXP4XX=y
 # CONFIG_MTD_EDB7312 is not set
 # CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
@@ -283,7 +534,6 @@ CONFIG_MTD_NAND_IDS=m
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -297,7 +547,6 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
 
 #
@@ -351,6 +600,7 @@ CONFIG_BLK_DEV_CMD64X=y
 CONFIG_BLK_DEV_HPT366=y
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
 CONFIG_BLK_DEV_PDC202XX_NEW=y
@@ -369,6 +619,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 
 #
@@ -379,6 +630,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -391,235 +643,13 @@ CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=m
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_FWMARK=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-CONFIG_IP_VS=m
-CONFIG_IP_VS_DEBUG=y
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-# CONFIG_IP_VS_PROTO_TCP is not set
-# CONFIG_IP_VS_PROTO_UDP is not set
-# CONFIG_IP_VS_PROTO_ESP is not set
-# CONFIG_IP_VS_PROTO_AH is not set
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-# CONFIG_IP_VS_SED is not set
-# CONFIG_IP_VS_NQ is not set
-
-#
-# IPVS application helper
-#
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# IP: Netfilter Configuration
+# Network device support
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_TFTP is not set
-# CONFIG_IP_NF_AMANDA is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-# CONFIG_IP_NF_MATCH_IPRANGE is not set
-CONFIG_IP_NF_MATCH_MAC=m
-# CONFIG_IP_NF_MATCH_PKTTYPE is not set
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_DSCP is not set
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-# CONFIG_IP_NF_MATCH_HELPER is not set
-CONFIG_IP_NF_MATCH_STATE=m
-# CONFIG_IP_NF_MATCH_CONNTRACK is not set
-CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_PHYSDEV is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_SAME is not set
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_DSCP is not set
-CONFIG_IP_NF_TARGET_MARK=m
-# CONFIG_IP_NF_TARGET_CLASSIFY is not set
-# CONFIG_IP_NF_RAW is not set
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-# CONFIG_IP_NF_ARP_MANGLE is not set
-
-#
-# Bridge: Netfilter Configuration
-#
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-CONFIG_ATM=y
-CONFIG_ATM_CLIP=y
-# CONFIG_ATM_CLIP_NO_ICMP is not set
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-CONFIG_X25=m
-CONFIG_LAPB=m
-# CONFIG_NET_DIVERT is not set
-CONFIG_ECONET=m
-CONFIG_ECONET_AUNUDP=y
-CONFIG_ECONET_NATIVE=y
-CONFIG_WAN_ROUTER=m
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_ATM is not set
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-# CONFIG_NET_SCH_NETEM is not set
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_BASIC is not set
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_NET_CLS_IND is not set
-# CONFIG_CLS_U32_MARK is not set
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
-
-#
-# Network testing
-#
-CONFIG_NET_PKTGEN=m
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -627,6 +657,11 @@ CONFIG_DUMMY=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -635,6 +670,7 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
 
 #
 # Tulip family network device support
@@ -671,13 +707,17 @@ CONFIG_EEPRO100=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -702,6 +742,7 @@ CONFIG_NET_RADIO=y
 CONFIG_HERMES=y
 # CONFIG_PLX_HERMES is not set
 # CONFIG_TMD_HERMES is not set
+# CONFIG_NORTEL_HERMES is not set
 CONFIG_PCI_HERMES=y
 # CONFIG_ATMEL is not set
 
@@ -709,6 +750,7 @@ CONFIG_PCI_HERMES=y
 # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
 #
 # CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 CONFIG_NET_WIRELESS=y
 
 #
@@ -758,6 +800,8 @@ CONFIG_ATM_TCP=m
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -795,7 +839,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 # CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices
@@ -816,6 +859,7 @@ CONFIG_SERIAL_8250_NR_UARTS=2
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -882,12 +926,11 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_IOP3XX is not set
-# CONFIG_I2C_ISA is not set
 CONFIG_I2C_IXP4XX=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
 # CONFIG_SCx200_ACB is not set
@@ -901,14 +944,33 @@ CONFIG_I2C_IXP4XX=y
 # CONFIG_I2C_PCA_ISA is not set
 
 #
-# Hardware Sensors Chip support
+# Miscellaneous I2C Chip support
 #
-CONFIG_I2C_SENSOR=y
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
 # CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_FSCHER is not set
 # CONFIG_SENSORS_FSCPOS is not set
@@ -924,30 +986,26 @@ CONFIG_I2C_SENSOR=y
 # CONFIG_SENSORS_LM85 is not set
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
-# Other I2C Chip support
+# Misc devices
 #
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 
 #
-# Misc devices
+# Multimedia Capabilities Port drivers
 #
 
 #
@@ -994,6 +1052,7 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -1004,17 +1063,15 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -1034,12 +1091,10 @@ CONFIG_DNOTIFY=y
 #
 CONFIG_PROC_FS=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1054,8 +1109,7 @@ CONFIG_RAMFS=y
 # CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@@ -1072,12 +1126,14 @@ CONFIG_JFFS2_RTIME=y
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -1086,6 +1142,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1124,6 +1181,7 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1158,6 +1216,7 @@ CONFIG_DEBUG_LL=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig
index 4198677cd394..529f0f72e1e9 100644
--- a/arch/arm/configs/omap_h2_1610_defconfig
+++ b/arch/arm/configs/omap_h2_1610_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13
-# Mon Sep  5 18:07:12 2005
+# Linux kernel version: 2.6.14
+# Wed Nov  9 18:53:40 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -22,6 +22,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
@@ -31,6 +32,7 @@ CONFIG_SYSCTL=y
 # CONFIG_HOTPLUG is not set
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -60,6 +62,23 @@ CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_KMOD is not set
 
 #
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # System Type
 #
 # CONFIG_ARCH_CLPS7500 is not set
@@ -81,6 +100,7 @@ CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_ARCH_LH7A40X is not set
 CONFIG_ARCH_OMAP=y
 # CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
@@ -112,7 +132,7 @@ CONFIG_OMAP_SERIAL_WAKE=y
 # OMAP Core Type
 #
 # CONFIG_ARCH_OMAP730 is not set
-# CONFIG_ARCH_OMAP1510 is not set
+# CONFIG_ARCH_OMAP15XX is not set
 CONFIG_ARCH_OMAP16XX=y
 
 #
@@ -177,6 +197,8 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
 
@@ -258,14 +280,19 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
 #
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
@@ -281,6 +308,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -291,6 +322,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -328,21 +360,13 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -369,10 +393,12 @@ CONFIG_SCSI_PROC_FS=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
 #
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DEBUG is not set
 
@@ -404,6 +430,11 @@ CONFIG_NETDEVICES=y
 # CONFIG_TUN is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -439,6 +470,7 @@ CONFIG_PPP=y
 # CONFIG_PPP_SYNC_TTY is not set
 # CONFIG_PPP_DEFLATE is not set
 # CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
 # CONFIG_PPPOE is not set
 CONFIG_SLIP=y
 CONFIG_SLIP_COMPRESSED=y
@@ -541,18 +573,18 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 #
 # TPM devices
 #
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
 #
 # CONFIG_I2C is not set
-# CONFIG_I2C_SENSOR is not set
-CONFIG_ISP1301_OMAP=y
 
 #
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
@@ -560,6 +592,10 @@ CONFIG_HWMON=y
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -576,7 +612,6 @@ CONFIG_FB=y
 # CONFIG_FB_CFB_FILLRECT is not set
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
 # CONFIG_FB_MACMODES is not set
 CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_TILEBLITTING is not set
@@ -589,6 +624,7 @@ CONFIG_FB_MODE_HELPERS=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
@@ -600,6 +636,7 @@ CONFIG_FONT_8x16=y
 # CONFIG_FONT_SUN8x16 is not set
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
+# CONFIG_FONT_RL is not set
 
 #
 # Logo configuration
@@ -624,10 +661,10 @@ CONFIG_SOUND=y
 # Open Sound System
 #
 CONFIG_SOUND_PRIME=y
+# CONFIG_OBSOLETE_OSS_DRIVER is not set
 # CONFIG_SOUND_MSNDCLAS is not set
 # CONFIG_SOUND_MSNDPIN is not set
 # CONFIG_SOUND_OSS is not set
-# CONFIG_SOUND_AD1980 is not set
 
 #
 # USB support
@@ -637,22 +674,21 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
 #
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
 # USB Gadget Support
 #
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET is not set
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_PXA2XX is not set
 # CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 # CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH is not set
 # CONFIG_USB_GADGETFS is not set
 # CONFIG_USB_FILE_STORAGE is not set
 # CONFIG_USB_G_SERIAL is not set
@@ -673,10 +709,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 CONFIG_ROMFS_FS=y
@@ -685,6 +717,7 @@ CONFIG_INOTIFY=y
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -706,10 +739,10 @@ CONFIG_FAT_DEFAULT_CODEPAGE=437
 #
 CONFIG_PROC_FS=y
 CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -750,6 +783,7 @@ CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -859,6 +893,7 @@ CONFIG_CRYPTO_DES=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig
new file mode 100644
index 000000000000..0485b2f1cc20
--- /dev/null
+++ b/arch/arm/configs/realview_defconfig
@@ -0,0 +1,789 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc2
+# Thu Sep 29 14:50:10 2005
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+# CONFIG_EXPERIMENTAL is not set
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_REALVIEW=y
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+
+#
+# RealView platform type
+#
+CONFIG_MACH_REALVIEW_EB=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+# CONFIG_CPU_V6 is not set
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_GIC=y
+CONFIG_ICST307=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+CONFIG_ISA_DMA_API=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_ARM_INTEGRATOR=y
+# CONFIG_MTD_EDB7312 is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_AMBAKMI=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_ARMCLCD=y
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_ARMAACI is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB is not set
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_WAITQ is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 756348bf5170..3f97590c91f2 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-git8
-# Thu Sep  8 19:24:02 2005
+# Linux kernel version: 2.6.15-rc1
+# Sun Nov 13 17:41:24 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -62,6 +62,23 @@ CONFIG_OBSOLETE_MODPARM=y
 CONFIG_KMOD=y
 
 #
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # System Type
 #
 # CONFIG_ARCH_CLPS7500 is not set
@@ -83,6 +100,7 @@ CONFIG_ARCH_S3C2410=y
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
@@ -108,6 +126,7 @@ CONFIG_CPU_S3C2440=y
 # S3C2410 Boot
 #
 # CONFIG_S3C2410_BOOT_WATCHDOG is not set
+# CONFIG_S3C2410_BOOT_ERROR_RESET is not set
 
 #
 # S3C2410 Setup
@@ -142,6 +161,7 @@ CONFIG_CPU_TLB_V4WBI=y
 #
 # Bus support
 #
+CONFIG_ISA=y
 CONFIG_ISA_DMA_API=y
 
 #
@@ -152,7 +172,6 @@ CONFIG_ISA_DMA_API=y
 #
 # Kernel Features
 #
-# CONFIG_SMP is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
@@ -163,6 +182,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -253,6 +273,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -260,7 +284,6 @@ CONFIG_TCP_CONG_BIC=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
@@ -300,6 +323,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -335,7 +359,6 @@ CONFIG_MTD_ROM=y
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PHYSMAP is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
 # CONFIG_MTD_IMPA7 is not set
 CONFIG_MTD_BAST=y
 CONFIG_MTD_BAST_MAXSIZE=4
@@ -370,6 +393,11 @@ CONFIG_MTD_NAND_S3C2410=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 
 #
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
 # Parallel port support
 #
 CONFIG_PARPORT=y
@@ -381,10 +409,12 @@ CONFIG_PARPORT_1284=y
 #
 # Plug and Play support
 #
+# CONFIG_PNP is not set
 
 #
 # Block devices
 #
+# CONFIG_BLK_DEV_XD is not set
 # CONFIG_PARIDE is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
@@ -395,14 +425,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -428,6 +450,7 @@ CONFIG_BLK_DEV_IDEFLOPPY=m
 CONFIG_IDE_GENERIC=y
 # CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDE_BAST=y
+# CONFIG_IDE_CHIPSETS is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
 # CONFIG_IDEDMA_AUTO is not set
 # CONFIG_BLK_DEV_HD is not set
@@ -467,6 +490,11 @@ CONFIG_NETDEVICES=y
 # CONFIG_TUN is not set
 
 #
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
 # PHY device support
 #
 # CONFIG_PHYLIB is not set
@@ -475,9 +503,19 @@ CONFIG_NETDEVICES=y
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+CONFIG_MII=y
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_LANCE is not set
+# CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_SMC91X is not set
-CONFIG_DM9000=m
+CONFIG_DM9000=y
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_NET_POCKET is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -490,6 +528,7 @@ CONFIG_DM9000=m
 #
 # Token Ring devices
 #
+# CONFIG_TR is not set
 
 #
 # Wireless LAN (non-hamradio)
@@ -542,6 +581,9 @@ CONFIG_KEYBOARD_ATKBD=y
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 # CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -568,6 +610,7 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_ROCKETPORT is not set
 # CONFIG_CYCLADES is not set
 # CONFIG_DIGIEPCA is not set
+# CONFIG_ESPSERIAL is not set
 # CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
@@ -590,6 +633,10 @@ CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
 # CONFIG_SERIAL_8250_RSA is not set
+# CONFIG_SERIAL_8250_FOURPORT is not set
+# CONFIG_SERIAL_8250_ACCENT is not set
+# CONFIG_SERIAL_8250_BOCA is not set
+# CONFIG_SERIAL_8250_HUB6 is not set
 
 #
 # Non-8250 serial port support
@@ -622,6 +669,13 @@ CONFIG_WATCHDOG=y
 #
 # CONFIG_SOFT_WATCHDOG is not set
 CONFIG_S3C2410_WATCHDOG=y
+
+#
+# ISA-based Watchdog Cards
+#
+# CONFIG_PCWATCHDOG is not set
+# CONFIG_MIXCOMWD is not set
+# CONFIG_WDT is not set
 # CONFIG_NVRAM is not set
 # CONFIG_RTC is not set
 CONFIG_S3C2410_RTC=y
@@ -636,6 +690,7 @@ CONFIG_S3C2410_RTC=y
 #
 # TPM devices
 #
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -653,6 +708,7 @@ CONFIG_I2C_ALGOBIT=m
 #
 # I2C Hardware Bus support
 #
+# CONFIG_I2C_ELEKTOR is not set
 CONFIG_I2C_ISA=m
 # CONFIG_I2C_PARPORT is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
@@ -671,6 +727,7 @@ CONFIG_SENSORS_EEPROM=m
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -737,22 +794,28 @@ CONFIG_SENSORS_LM85=m
 # Graphics support
 #
 CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_MACMODES is not set
 CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_S3C2410=y
+# CONFIG_FB_S3C2410_DEBUG is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
 # Console display driver support
 #
 # CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
 
 #
 # Logo configuration
@@ -773,6 +836,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
 #
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
@@ -798,10 +865,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 CONFIG_ROMFS_FS=y
@@ -810,6 +873,7 @@ CONFIG_INOTIFY=y
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -854,6 +918,7 @@ CONFIG_JFFS_FS_VERBOSE=0
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@@ -884,6 +949,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -959,7 +1025,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
@@ -970,7 +1036,9 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_WAITQ is not set
 # CONFIG_DEBUG_ERRORS is not set
@@ -998,6 +1066,7 @@ CONFIG_DEBUG_S3C2410_UART=0
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig
new file mode 100644
index 000000000000..9895539533d6
--- /dev/null
+++ b/arch/arm/configs/spitz_defconfig
@@ -0,0 +1,1461 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.15-rc2
+# Mon Nov 28 10:26:52 2005
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_L7200 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+
+#
+# Intel PXA2xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+CONFIG_PXA_SHARPSL=y
+# CONFIG_PXA_SHARPSL_25x is not set
+CONFIG_PXA_SHARPSL_27x=y
+CONFIG_MACH_AKITA=y
+CONFIG_MACH_SPITZ=y
+CONFIG_MACH_BORZOI=y
+CONFIG_PXA27x=y
+CONFIG_IWMMXT=y
+CONFIG_PXA_SHARP_Cxx00=y
+CONFIG_PXA_SSP=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_XSCALE_PMU=y
+CONFIG_SHARP_PARAM=y
+CONFIG_SHARP_SCOOP=y
+
+#
+# Bus support
+#
+CONFIG_ISA_DMA_API=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+CONFIG_PCMCIA_PXA2XX=y
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_APM=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+CONFIG_IP_NF_CT_PROTO_SCTP=m
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_REALM=m
+CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
+CONFIG_IP_NF_MATCH_COMMENT=m
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
+# CONFIG_IP_NF_MATCH_STRING is not set
+CONFIG_IP_NF_FILTER=m
+# CONFIG_IP_NF_TARGET_REJECT is not set
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+# CONFIG_IP_NF_TARGET_MASQUERADE is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_SAME is not set
+# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+# CONFIG_IP_NF_TARGET_TOS is not set
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_DSCP is not set
+# CONFIG_IP_NF_TARGET_MARK is not set
+# CONFIG_IP_NF_TARGET_CLASSIFY is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_TARGET_NOTRACK is not set
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_LIMIT=m
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_MULTIPORT=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_MARK=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AHESP=m
+CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+# CONFIG_IP6_NF_TARGET_LOG is not set
+# CONFIG_IP6_NF_TARGET_REJECT is not set
+# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP6_NF_TARGET_MARK is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+CONFIG_IP6_NF_RAW=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_NSC_FIR is not set
+# CONFIG_WINBOND_FIR is not set
+# CONFIG_SMC_IRCC_FIR is not set
+# CONFIG_ALI_FIR is not set
+# CONFIG_VIA_FIR is not set
+CONFIG_PXA_FICP=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+# CONFIG_BT_HCIUSB_SCO is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+# CONFIG_IEEE80211_CRYPT_CCMP is not set
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_ROM=y
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_SHARP_SL=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_SHARPSL=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+CONFIG_HERMES=m
+# CONFIG_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_CS=m
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+CONFIG_NET_PCMCIA=y
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+CONFIG_PCMCIA_PCNET=m
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_POWER is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_CORGI is not set
+CONFIG_KEYBOARD_SPITZ=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_CORGI=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_DEVICE=y
+CONFIG_BACKLIGHT_CORGI=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_SL811_HCD=m
+CONFIG_USB_SL811_CS=m
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
+CONFIG_USB_AIPTEK=m
+CONFIG_USB_WACOM=m
+# CONFIG_USB_ACECAD is not set
+CONFIG_USB_KBTAB=m
+CONFIG_USB_POWERMATE=m
+CONFIG_USB_MTOUCH=m
+# CONFIG_USB_ITMTOUCH is not set
+CONFIG_USB_EGALAX=m
+# CONFIG_USB_YEALINK is not set
+CONFIG_USB_XPAD=m
+CONFIG_USB_ATI_REMOTE=m
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB Multimedia devices
+#
+CONFIG_USB_DABUSB=m
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_ZD1201 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ANYDATA is not set
+CONFIG_USB_SERIAL_BELKIN=m
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP2101 is not set
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_HP4X is not set
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+# CONFIG_USB_SERIAL_OPTION is not set
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_EZUSB=y
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_AUERSWALD=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_PHIDGETKIT=m
+CONFIG_USB_PHIDGETSERVO=m
+CONFIG_USB_IDMOUSE=m
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+CONFIG_USB_GADGET_DUMMY_HCD=y
+CONFIG_USB_DUMMY_HCD=m
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_WBSD is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_WAITQ is not set
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 3e1b0327e4d7..c11169b5ed9a 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the linux kernel.
 #
 
-AFLAGS_head.o := -DTEXTADDR=$(TEXTADDR) -DDATAADDR=$(DATAADDR)
+AFLAGS_head.o := -DKERNEL_RAM_ADDR=$(TEXTADDR)
 
 # Object file lists.
 
diff --git a/arch/arm/kernel/apm.c b/arch/arm/kernel/apm.c
index b0bbd1e62ebb..a2843be05557 100644
--- a/arch/arm/kernel/apm.c
+++ b/arch/arm/kernel/apm.c
@@ -20,6 +20,7 @@
 #include <linux/apm_bios.h>
 #include <linux/sched.h>
 #include <linux/pm.h>
+#include <linux/pm_legacy.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index 835d450797a1..9997098009a9 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -9,6 +9,7 @@
  */
 #include <linux/module.h>
 #include <linux/string.h>
+#include <linux/cryptohash.h>
 #include <linux/delay.h>
 #include <linux/in6.h>
 #include <linux/syscalls.h>
@@ -45,8 +46,8 @@ extern void fp_enter(void);
 
 #define EXPORT_SYMBOL_ALIAS(sym,orig)		\
  EXPORT_CRC_ALIAS(sym)				\
- const struct kernel_symbol __ksymtab_##sym	\
-  __attribute__((section("__ksymtab"))) =	\
+ static const struct kernel_symbol __ksymtab_##sym	\
+  __attribute_used__ __attribute__((section("__ksymtab"))) =	\
     { (unsigned long)&orig, #sym };
 
 /*
@@ -119,13 +120,15 @@ EXPORT_SYMBOL(__arch_strncpy_from_user);
 EXPORT_SYMBOL(__get_user_1);
 EXPORT_SYMBOL(__get_user_2);
 EXPORT_SYMBOL(__get_user_4);
-EXPORT_SYMBOL(__get_user_8);
 
 EXPORT_SYMBOL(__put_user_1);
 EXPORT_SYMBOL(__put_user_2);
 EXPORT_SYMBOL(__put_user_4);
 EXPORT_SYMBOL(__put_user_8);
 
+	/* crypto hash */
+EXPORT_SYMBOL(sha_transform);
+
 	/* gcc lib functions */
 EXPORT_SYMBOL(__ashldi3);
 EXPORT_SYMBOL(__ashrdi3);
diff --git a/arch/arm/kernel/arthur.c b/arch/arm/kernel/arthur.c
index a418dad6692c..0ee2e9819631 100644
--- a/arch/arm/kernel/arthur.c
+++ b/arch/arm/kernel/arthur.c
@@ -18,6 +18,7 @@
 #include <linux/stddef.h>
 #include <linux/signal.h>
 #include <linux/init.h>
+#include <linux/sched.h>
 
 #include <asm/ptrace.h>
 
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index c1ff4d1f1bfd..04d3082a7b94 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -94,7 +94,6 @@ int main(void)
   DEFINE(VM_EXEC,	       	VM_EXEC);
   BLANK();
   DEFINE(PAGE_SZ,	       	PAGE_SIZE);
-  DEFINE(VIRT_OFFSET,		PAGE_OFFSET);
   BLANK();
   DEFINE(SYS_ERROR0,		0x9f0000);
   BLANK();
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 7152bfbee581..d9fb819bf7cc 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -15,6 +15,7 @@
  */
 #include <linux/config.h>
 
+#include <asm/memory.h>
 #include <asm/glue.h>
 #include <asm/vfpmacros.h>
 #include <asm/hardware.h>		/* should be moved into entry-macro.S */
@@ -46,6 +47,13 @@
 	movne	r0, sp
 	adrne	lr, 1b
 	bne	do_IPI
+
+#ifdef CONFIG_LOCAL_TIMERS
+	test_for_ltirq r0, r6, r5, lr
+	movne	r0, sp
+	adrne	lr, 1b
+	bne	do_local_timer
+#endif
 #endif
 
 	.endm
@@ -310,7 +318,7 @@ __pabt_svc:
 
 #if __LINUX_ARM_ARCH__ < 6 && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
 	@ make sure our user space atomic helper is aborted
-	cmp	r2, #VIRT_OFFSET
+	cmp	r2, #TASK_SIZE
 	bichs	r3, r3, #PSR_Z_BIT
 #endif
 
@@ -537,7 +545,7 @@ ENTRY(__switch_to)
 #ifdef CONFIG_CPU_MPCORE
 	clrex
 #else
-	strex	r3, r4, [ip]			@ Clear exclusive monitor
+	strex	r5, r4, [ip]			@ Clear exclusive monitor
 #endif
 #endif
 #if defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_IWMMXT)
@@ -784,7 +792,7 @@ __kuser_helper_end:
  * SP points to a minimal amount of processor-private memory, the address
  * of which is copied into r0 for the mode specific abort handler.
  */
-	.macro	vector_stub, name, correction=0
+	.macro	vector_stub, name, mode, correction=0
 	.align	5
 
 vector_\name:
@@ -804,15 +812,14 @@ vector_\name:
 	@ Prepare for SVC32 mode.  IRQs remain disabled.
 	@
 	mrs	r0, cpsr
-	bic	r0, r0, #MODE_MASK
-	orr	r0, r0, #SVC_MODE
+	eor	r0, r0, #(\mode ^ SVC_MODE)
 	msr	spsr_cxsf, r0
 
 	@
 	@ the branch table must immediately follow this code
 	@
-	mov	r0, sp
 	and	lr, lr, #0x0f
+	mov	r0, sp
 	ldr	lr, [pc, lr, lsl #2]
 	movs	pc, lr			@ branch to handler in SVC mode
 	.endm
@@ -822,7 +829,7 @@ __stubs_start:
 /*
  * Interrupt dispatcher
  */
-	vector_stub	irq, 4
+	vector_stub	irq, IRQ_MODE, 4
 
 	.long	__irq_usr			@  0  (USR_26 / USR_32)
 	.long	__irq_invalid			@  1  (FIQ_26 / FIQ_32)
@@ -845,7 +852,7 @@ __stubs_start:
  * Data abort dispatcher
  * Enter in ABT mode, spsr = USR CPSR, lr = USR PC
  */
-	vector_stub	dabt, 8
+	vector_stub	dabt, ABT_MODE, 8
 
 	.long	__dabt_usr			@  0  (USR_26 / USR_32)
 	.long	__dabt_invalid			@  1  (FIQ_26 / FIQ_32)
@@ -868,7 +875,7 @@ __stubs_start:
  * Prefetch abort dispatcher
  * Enter in ABT mode, spsr = USR CPSR, lr = USR PC
  */
-	vector_stub	pabt, 4
+	vector_stub	pabt, ABT_MODE, 4
 
 	.long	__pabt_usr			@  0 (USR_26 / USR_32)
 	.long	__pabt_invalid			@  1 (FIQ_26 / FIQ_32)
@@ -891,7 +898,7 @@ __stubs_start:
  * Undef instr entry dispatcher
  * Enter in UND mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
  */
-	vector_stub	und
+	vector_stub	und, UND_MODE
 
 	.long	__und_usr			@  0 (USR_26 / USR_32)
 	.long	__und_invalid			@  1 (FIQ_26 / FIQ_32)
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 81d450ac3fab..f7f183075237 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -48,8 +48,7 @@ work_pending:
 	mov	r0, sp				@ 'regs'
 	mov	r2, why				@ 'syscall'
 	bl	do_notify_resume
-	disable_irq				@ disable interrupts
-	b	no_work_pending
+	b	ret_slow_syscall		@ Check work again
 
 work_resched:
 	bl	schedule
@@ -106,15 +105,10 @@ ENTRY(ret_from_fork)
 	.endm
 
 .Larm700bug:
-	ldr	r0, [sp, #S_PSR]		@ Get calling cpsr
-	sub	lr, lr, #4
-	str	lr, [r8]
-	msr	spsr_cxsf, r0
 	ldmia	sp, {r0 - lr}^			@ Get calling r0 - lr
 	mov	r0, r0
-	ldr	lr, [sp, #S_PC]			@ Get PC
 	add	sp, sp, #S_FRAME_SIZE
-	movs	pc, lr
+	subs	pc, lr, #4
 #else
 	.macro	arm710_bug_check, instr, temp
 	.endm
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 539626351348..d7d69fd7039f 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -17,10 +17,10 @@
 
 #include <asm/assembler.h>
 #include <asm/domain.h>
-#include <asm/mach-types.h>
 #include <asm/procinfo.h>
 #include <asm/ptrace.h>
 #include <asm/asm-offsets.h>
+#include <asm/memory.h>
 #include <asm/thread_info.h>
 #include <asm/system.h>
 
@@ -33,52 +33,28 @@
 #define MACHINFO_PGOFFIO	12
 #define MACHINFO_NAME		16
 
-#ifndef CONFIG_XIP_KERNEL
 /*
- * We place the page tables 16K below TEXTADDR.  Therefore, we must make sure
- * that TEXTADDR is correctly set.  Currently, we expect the least significant
- * 16 bits to be 0x8000, but we could probably relax this restriction to
- * TEXTADDR >= PAGE_OFFSET + 0x4000
- *
- * Note that swapper_pg_dir is the virtual address of the page tables, and
- * pgtbl gives us a position-independent reference to these tables.  We can
- * do this because stext == TEXTADDR
+ * swapper_pg_dir is the virtual address of the initial page table.
+ * We place the page tables 16K below KERNEL_RAM_ADDR.  Therefore, we must
+ * make sure that KERNEL_RAM_ADDR is correctly set.  Currently, we expect
+ * the least significant 16 bits to be 0x8000, but we could probably
+ * relax this restriction to KERNEL_RAM_ADDR >= PAGE_OFFSET + 0x4000.
  */
-#if (TEXTADDR & 0xffff) != 0x8000
-#error TEXTADDR must start at 0xXXXX8000
+#if (KERNEL_RAM_ADDR & 0xffff) != 0x8000
+#error KERNEL_RAM_ADDR must start at 0xXXXX8000
 #endif
 
 	.globl	swapper_pg_dir
-	.equ	swapper_pg_dir, TEXTADDR - 0x4000
+	.equ	swapper_pg_dir, KERNEL_RAM_ADDR - 0x4000
 
-	.macro	pgtbl, rd, phys
-	adr	\rd, stext
-	sub	\rd, \rd, #0x4000
+	.macro	pgtbl, rd
+	ldr	\rd, =(__virt_to_phys(KERNEL_RAM_ADDR - 0x4000))
 	.endm
-#else
-/*
- * XIP Kernel:
- *
- * We place the page tables 16K below DATAADDR.  Therefore, we must make sure
- * that DATAADDR is correctly set.  Currently, we expect the least significant
- * 16 bits to be 0x8000, but we could probably relax this restriction to
- * DATAADDR >= PAGE_OFFSET + 0x4000
- *
- * Note that pgtbl is meant to return the physical address of swapper_pg_dir.
- * We can't make it relative to the kernel position in this case since
- * the kernel can physically be anywhere.
- */
-#if (DATAADDR & 0xffff) != 0x8000
-#error DATAADDR must start at 0xXXXX8000
-#endif
-
-	.globl	swapper_pg_dir
-	.equ	swapper_pg_dir, DATAADDR - 0x4000
 
-	.macro	pgtbl, rd, phys
-	ldr	\rd, =((DATAADDR - 0x4000) - VIRT_OFFSET)
-	add	\rd, \rd, \phys
-	.endm
+#ifdef CONFIG_XIP_KERNEL
+#define TEXTADDR  XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
+#else
+#define TEXTADDR  KERNEL_RAM_ADDR
 #endif
 
 /*
@@ -106,7 +82,7 @@ ENTRY(stext)
 						@ and irqs disabled
 	bl	__lookup_processor_type		@ r5=procinfo r9=cpuid
 	movs	r10, r5				@ invalid processor (r5=0)?
-	beq	__error_p				@ yes, error 'p'
+	beq	__error_p			@ yes, error 'p'
 	bl	__lookup_machine_type		@ r5=machinfo
 	movs	r8, r5				@ invalid machine (r5=0)?
 	beq	__error_a			@ yes, error 'a'
@@ -279,7 +255,7 @@ __turn_mmu_on:
 	.type	__create_page_tables, %function
 __create_page_tables:
 	ldr	r5, [r8, #MACHINFO_PHYSRAM]	@ physram
-	pgtbl	r4, r5				@ page table address
+	pgtbl	r4				@ page table address
 
 	/*
 	 * Clear the 16K level 1 swapper page table
@@ -324,7 +300,7 @@ __create_page_tables:
 	/*
 	 * Then map first 1MB of ram in case it contains our boot params.
 	 */
-	add	r0, r4, #VIRT_OFFSET >> 18
+	add	r0, r4, #PAGE_OFFSET >> 18
 	orr	r6, r5, r7
 	str	r6, [r0]
 
@@ -366,16 +342,12 @@ __create_page_tables:
 	bne	1b
 #if defined(CONFIG_ARCH_NETWINDER) || defined(CONFIG_ARCH_CATS)
 	/*
-	 * If we're using the NetWinder, we need to map in
-	 * the 16550-type serial port for the debug messages
+	 * If we're using the NetWinder or CATS, we also need to map
+	 * in the 16550-type serial port for the debug messages
 	 */
-	teq	r1, #MACH_TYPE_NETWINDER
-	teqne	r1, #MACH_TYPE_CATS
-	bne	1f
 	add	r0, r4, #0xff000000 >> 18
 	orr	r3, r7, #0x7c000000
 	str	r3, [r0]
-1:
 #endif
 #ifdef CONFIG_ARCH_RPC
 	/*
diff --git a/arch/arm/kernel/io.c b/arch/arm/kernel/io.c
index 6c20c1188b60..1f6822dfae74 100644
--- a/arch/arm/kernel/io.c
+++ b/arch/arm/kernel/io.c
@@ -7,7 +7,7 @@
  * Copy data from IO memory space to "real" memory space.
  * This needs to be optimized.
  */
-void _memcpy_fromio(void *to, void __iomem *from, size_t count)
+void _memcpy_fromio(void *to, const volatile void __iomem *from, size_t count)
 {
 	unsigned char *t = to;
 	while (count) {
@@ -22,7 +22,7 @@ void _memcpy_fromio(void *to, void __iomem *from, size_t count)
  * Copy data from "real" memory space to IO memory space.
  * This needs to be optimized.
  */
-void _memcpy_toio(void __iomem *to, const void *from, size_t count)
+void _memcpy_toio(volatile void __iomem *to, const void *from, size_t count)
 {
 	const unsigned char *f = from;
 	while (count) {
@@ -37,7 +37,7 @@ void _memcpy_toio(void __iomem *to, const void *from, size_t count)
  * "memset" on IO memory space.
  * This needs to be optimized.
  */
-void _memset_io(void __iomem *dst, int c, size_t count)
+void _memset_io(volatile void __iomem *dst, int c, size_t count)
 {
 	while (count) {
 		count--;
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 3284118f356b..d7099dbbb879 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -264,6 +264,7 @@ unlock:
 #endif
 #ifdef CONFIG_SMP
 		show_ipi_list(p);
+		show_local_irqs(p);
 #endif
 		seq_printf(p, "Err: %10lu\n", irq_err_count);
 	}
@@ -995,7 +996,7 @@ void __init init_irq_proc(void)
 	struct proc_dir_entry *dir;
 	int irq;
 
-	dir = proc_mkdir("irq", 0);
+	dir = proc_mkdir("irq", NULL);
 	if (!dir)
 		return;
 
@@ -1050,3 +1051,34 @@ static int __init noirqdebug_setup(char *str)
 }
 
 __setup("noirqdebug", noirqdebug_setup);
+
+#ifdef CONFIG_HOTPLUG_CPU
+/*
+ * The CPU has been marked offline.  Migrate IRQs off this CPU.  If
+ * the affinity settings do not allow other CPUs, force them onto any
+ * available CPU.
+ */
+void migrate_irqs(void)
+{
+	unsigned int i, cpu = smp_processor_id();
+
+	for (i = 0; i < NR_IRQS; i++) {
+		struct irqdesc *desc = irq_desc + i;
+
+		if (desc->cpu == cpu) {
+			unsigned int newcpu = any_online_cpu(desc->affinity);
+
+			if (newcpu == NR_CPUS) {
+				if (printk_ratelimit())
+					printk(KERN_INFO "IRQ%u no longer affine to CPU%u\n",
+					       i, cpu);
+
+				cpus_setall(desc->affinity);
+				newcpu = any_online_cpu(desc->affinity);
+			}
+
+			route_irq(desc, i, newcpu);
+		}
+	}
+}
+#endif /* CONFIG_HOTPLUG_CPU */
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index 1a85cfdad5ac..6055e1427ba3 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -11,6 +11,7 @@
  */
 #include <linux/config.h>
 #include <linux/module.h>
+#include <linux/moduleloader.h>
 #include <linux/kernel.h>
 #include <linux/elf.h>
 #include <linux/vmalloc.h>
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 409db6d5ec99..30494aab829a 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -26,6 +26,7 @@
 #include <linux/interrupt.h>
 #include <linux/kallsyms.h>
 #include <linux/init.h>
+#include <linux/cpu.h>
 
 #include <asm/system.h>
 #include <asm/io.h>
@@ -85,12 +86,16 @@ EXPORT_SYMBOL(pm_power_off);
  */
 void default_idle(void)
 {
-	local_irq_disable();
-	if (!need_resched() && !hlt_counter) {
-		timer_dyn_reprogram();
-		arch_idle();
+	if (hlt_counter)
+		cpu_relax();
+	else {
+		local_irq_disable();
+		if (!need_resched()) {
+			timer_dyn_reprogram();
+			arch_idle();
+		}
+		local_irq_enable();
 	}
-	local_irq_enable();
 }
 
 /*
@@ -105,15 +110,23 @@ void cpu_idle(void)
 	/* endless idle loop with no priority at all */
 	while (1) {
 		void (*idle)(void) = pm_idle;
+
+#ifdef CONFIG_HOTPLUG_CPU
+		if (cpu_is_offline(smp_processor_id())) {
+			leds_event(led_idle_start);
+			cpu_die();
+		}
+#endif
+
 		if (!idle)
 			idle = default_idle;
-		preempt_disable();
 		leds_event(led_idle_start);
 		while (!need_resched())
 			idle();
 		leds_event(led_idle_end);
-		preempt_enable();
+		preempt_enable_no_resched();
 		schedule();
+		preempt_disable();
 	}
 }
 
@@ -346,7 +359,7 @@ copy_thread(int nr, unsigned long clone_flags, unsigned long stack_start,
 	struct thread_info *thread = p->thread_info;
 	struct pt_regs *childregs;
 
-	childregs = ((struct pt_regs *)((unsigned long)thread + THREAD_START_SP)) - 1;
+	childregs = (void *)thread + THREAD_START_SP - sizeof(*regs);
 	*childregs = *regs;
 	childregs->ARM_r0 = 0;
 	childregs->ARM_sp = stack_start;
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index cd99b83f14c2..9a340e790da5 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -648,7 +648,7 @@ static int ptrace_setwmmxregs(struct task_struct *tsk, void __user *ufp)
 
 #endif
 
-static int do_ptrace(int request, struct task_struct *child, long addr, long data)
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
 	unsigned long tmp;
 	int ret;
@@ -782,53 +782,6 @@ static int do_ptrace(int request, struct task_struct *child, long addr, long dat
 	return ret;
 }
 
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
-{
-	struct task_struct *child;
-	int ret;
-
-	lock_kernel();
-	ret = -EPERM;
-	if (request == PTRACE_TRACEME) {
-		/* are we already being traced? */
-		if (current->ptrace & PT_PTRACED)
-			goto out;
-		ret = security_ptrace(current->parent, current);
-		if (ret)
-			goto out;
-		/* set the ptrace bit in the process flags. */
-		current->ptrace |= PT_PTRACED;
-		ret = 0;
-		goto out;
-	}
-	ret = -ESRCH;
-	read_lock(&tasklist_lock);
-	child = find_task_by_pid(pid);
-	if (child)
-		get_task_struct(child);
-	read_unlock(&tasklist_lock);
-	if (!child)
-		goto out;
-
-	ret = -EPERM;
-	if (pid == 1)		/* you may not mess with init */
-		goto out_tsk;
-
-	if (request == PTRACE_ATTACH) {
-		ret = ptrace_attach(child);
-		goto out_tsk;
-	}
-	ret = ptrace_check_attach(child, request == PTRACE_KILL);
-	if (ret == 0)
-		ret = do_ptrace(request, child, addr, data);
-
-out_tsk:
-	put_task_struct(child);
-out:
-	unlock_kernel();
-	return ret;
-}
-
 asmlinkage void syscall_trace(int why, struct pt_regs *regs)
 {
 	unsigned long ip;
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index c9b69771f92e..85774165e9fd 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -338,7 +338,8 @@ void cpu_init(void)
 		BUG();
 	}
 
-	dump_cpu_info(cpu);
+	if (system_state == SYSTEM_BOOTING)
+		dump_cpu_info(cpu);
 
 	/*
 	 * setup stacks for re-entrant exception handlers
@@ -838,7 +839,12 @@ static int c_show(struct seq_file *m, void *v)
 
 #if defined(CONFIG_SMP)
 	for_each_online_cpu(i) {
-		seq_printf(m, "Processor\t: %d\n", i);
+		/*
+		 * glibc reads /proc/cpuinfo to determine the number of
+		 * online processors, looking for lines beginning with
+		 * "processor".  Give glibc what it expects.
+		 */
+		seq_printf(m, "processor\t: %d\n", i);
 		seq_printf(m, "BogoMIPS\t: %lu.%02lu\n\n",
 			   per_cpu(cpu_data, i).loops_per_jiffy / (500000UL/HZ),
 			   (per_cpu(cpu_data, i).loops_per_jiffy / (5000UL/HZ)) % 100);
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index a94d75fef598..765922bcf9e7 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -139,93 +139,33 @@ struct iwmmxt_sigframe {
 	unsigned long	storage[0x98/4];
 };
 
-static int page_present(struct mm_struct *mm, void __user *uptr, int wr)
-{
-	unsigned long addr = (unsigned long)uptr;
-	pgd_t *pgd = pgd_offset(mm, addr);
-	if (pgd_present(*pgd)) {
-		pmd_t *pmd = pmd_offset(pgd, addr);
-		if (pmd_present(*pmd)) {
-			pte_t *pte = pte_offset_map(pmd, addr);
-			return (pte_present(*pte) && (!wr || pte_write(*pte)));
-		}
-	}
-	return 0;
-}
-
-static int copy_locked(void __user *uptr, void *kptr, size_t size, int write,
-		       void (*copyfn)(void *, void __user *))
-{
-	unsigned char v, __user *userptr = uptr;
-	int err = 0;
-
-	do {
-		struct mm_struct *mm;
-
-		if (write) {
-			__put_user_error(0, userptr, err);
-			__put_user_error(0, userptr + size - 1, err);
-		} else {
-			__get_user_error(v, userptr, err);
-			__get_user_error(v, userptr + size - 1, err);
-		}
-
-		if (err)
-			break;
-
-		mm = current->mm;
-		spin_lock(&mm->page_table_lock);
-		if (page_present(mm, userptr, write) &&
-		    page_present(mm, userptr + size - 1, write)) {
-		    	copyfn(kptr, uptr);
-		} else
-			err = 1;
-		spin_unlock(&mm->page_table_lock);
-	} while (err);
-
-	return err;
-}
-
 static int preserve_iwmmxt_context(struct iwmmxt_sigframe *frame)
 {
-	int err = 0;
+	char kbuf[sizeof(*frame) + 8];
+	struct iwmmxt_sigframe *kframe;
 
 	/* the iWMMXt context must be 64 bit aligned */
-	WARN_ON((unsigned long)frame & 7);
-
-	__put_user_error(IWMMXT_MAGIC0, &frame->magic0, err);
-	__put_user_error(IWMMXT_MAGIC1, &frame->magic1, err);
-
-	/*
-	 * iwmmxt_task_copy() doesn't check user permissions.
-	 * Let's do a dummy write on the upper boundary to ensure
-	 * access to user mem is OK all way up.
-	 */
-	err |= copy_locked(&frame->storage, current_thread_info(),
-			   sizeof(frame->storage), 1, iwmmxt_task_copy);
-	return err;
+	kframe = (struct iwmmxt_sigframe *)((unsigned long)(kbuf + 8) & ~7);
+	kframe->magic0 = IWMMXT_MAGIC0;
+	kframe->magic1 = IWMMXT_MAGIC1;
+	iwmmxt_task_copy(current_thread_info(), &kframe->storage);
+	return __copy_to_user(frame, kframe, sizeof(*frame));
 }
 
 static int restore_iwmmxt_context(struct iwmmxt_sigframe *frame)
 {
-	unsigned long magic0, magic1;
-	int err = 0;
-
-	/* the iWMMXt context is 64 bit aligned */
-	WARN_ON((unsigned long)frame & 7);
+	char kbuf[sizeof(*frame) + 8];
+	struct iwmmxt_sigframe *kframe;
 
-	/*
-	 * Validate iWMMXt context signature.
-	 * Also, iwmmxt_task_restore() doesn't check user permissions.
-	 * Let's do a dummy write on the upper boundary to ensure
-	 * access to user mem is OK all way up.
-	 */
-	__get_user_error(magic0, &frame->magic0, err);
-	__get_user_error(magic1, &frame->magic1, err);
-	if (!err && magic0 == IWMMXT_MAGIC0 && magic1 == IWMMXT_MAGIC1)
-		err = copy_locked(&frame->storage, current_thread_info(),
-				  sizeof(frame->storage), 0, iwmmxt_task_restore);
-	return err;
+	/* the iWMMXt context must be 64 bit aligned */
+	kframe = (struct iwmmxt_sigframe *)((unsigned long)(kbuf + 8) & ~7);
+	if (__copy_from_user(kframe, frame, sizeof(*frame)))
+		return -1;
+	if (kframe->magic0 != IWMMXT_MAGIC0 ||
+	    kframe->magic1 != IWMMXT_MAGIC1)
+		return -1;
+	iwmmxt_task_restore(current_thread_info(), &kframe->storage);
+	return 0;
 }
 
 #endif
@@ -655,23 +595,22 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
 	 */
 	ret |= !valid_user_regs(regs);
 
-	/*
-	 * Block the signal if we were unsuccessful.
-	 */
 	if (ret != 0) {
-		spin_lock_irq(&tsk->sighand->siglock);
-		sigorsets(&tsk->blocked, &tsk->blocked,
-			  &ka->sa.sa_mask);
-		if (!(ka->sa.sa_flags & SA_NODEFER))
-			sigaddset(&tsk->blocked, sig);
-		recalc_sigpending();
-		spin_unlock_irq(&tsk->sighand->siglock);
+		force_sigsegv(sig, tsk);
+		return;
 	}
 
-	if (ret == 0)
-		return;
+	/*
+	 * Block the signal if we were successful.
+	 */
+	spin_lock_irq(&tsk->sighand->siglock);
+	sigorsets(&tsk->blocked, &tsk->blocked,
+		  &ka->sa.sa_mask);
+	if (!(ka->sa.sa_flags & SA_NODEFER))
+		sigaddset(&tsk->blocked, sig);
+	recalc_sigpending();
+	spin_unlock_irq(&tsk->sighand->siglock);
 
-	force_sigsegv(sig, tsk);
 }
 
 /*
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 826164945747..373c0959bc2f 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -80,19 +80,23 @@ static DEFINE_SPINLOCK(smp_call_function_lock);
 
 int __cpuinit __cpu_up(unsigned int cpu)
 {
-	struct task_struct *idle;
+	struct cpuinfo_arm *ci = &per_cpu(cpu_data, cpu);
+	struct task_struct *idle = ci->idle;
 	pgd_t *pgd;
 	pmd_t *pmd;
 	int ret;
 
 	/*
-	 * Spawn a new process manually.  Grab a pointer to
-	 * its task struct so we can mess with it
+	 * Spawn a new process manually, if not already done.
+	 * Grab a pointer to its task struct so we can mess with it
 	 */
-	idle = fork_idle(cpu);
-	if (IS_ERR(idle)) {
-		printk(KERN_ERR "CPU%u: fork() failed\n", cpu);
-		return PTR_ERR(idle);
+	if (!idle) {
+		idle = fork_idle(cpu);
+		if (IS_ERR(idle)) {
+			printk(KERN_ERR "CPU%u: fork() failed\n", cpu);
+			return PTR_ERR(idle);
+		}
+		ci->idle = idle;
 	}
 
 	/*
@@ -138,7 +142,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 			ret = -EIO;
 	}
 
-	secondary_data.stack = 0;
+	secondary_data.stack = NULL;
 	secondary_data.pgdir = 0;
 
 	*pmd_offset(pgd, PHYS_OFFSET) = __pmd(0);
@@ -155,6 +159,96 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	return ret;
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
+/*
+ * __cpu_disable runs on the processor to be shutdown.
+ */
+int __cpuexit __cpu_disable(void)
+{
+	unsigned int cpu = smp_processor_id();
+	struct task_struct *p;
+	int ret;
+
+	ret = mach_cpu_disable(cpu);
+	if (ret)
+		return ret;
+
+	/*
+	 * Take this CPU offline.  Once we clear this, we can't return,
+	 * and we must not schedule until we're ready to give up the cpu.
+	 */
+	cpu_clear(cpu, cpu_online_map);
+
+	/*
+	 * OK - migrate IRQs away from this CPU
+	 */
+	migrate_irqs();
+
+	/*
+	 * Stop the local timer for this CPU.
+	 */
+	local_timer_stop(cpu);
+
+	/*
+	 * Flush user cache and TLB mappings, and then remove this CPU
+	 * from the vm mask set of all processes.
+	 */
+	flush_cache_all();
+	local_flush_tlb_all();
+
+	read_lock(&tasklist_lock);
+	for_each_process(p) {
+		if (p->mm)
+			cpu_clear(cpu, p->mm->cpu_vm_mask);
+	}
+	read_unlock(&tasklist_lock);
+
+	return 0;
+}
+
+/*
+ * called on the thread which is asking for a CPU to be shutdown -
+ * waits until shutdown has completed, or it is timed out.
+ */
+void __cpuexit __cpu_die(unsigned int cpu)
+{
+	if (!platform_cpu_kill(cpu))
+		printk("CPU%u: unable to kill\n", cpu);
+}
+
+/*
+ * Called from the idle thread for the CPU which has been shutdown.
+ *
+ * Note that we disable IRQs here, but do not re-enable them
+ * before returning to the caller. This is also the behaviour
+ * of the other hotplug-cpu capable cores, so presumably coming
+ * out of idle fixes this.
+ */
+void __cpuexit cpu_die(void)
+{
+	unsigned int cpu = smp_processor_id();
+
+	local_irq_disable();
+	idle_task_exit();
+
+	/*
+	 * actual CPU shutdown procedure is at least platform (if not
+	 * CPU) specific
+	 */
+	platform_cpu_die(cpu);
+
+	/*
+	 * Do not return to the idle loop - jump back to the secondary
+	 * cpu initialisation.  There's some initialisation which needs
+	 * to be repeated to undo the effects of taking the CPU offline.
+	 */
+	__asm__("mov	sp, %0\n"
+	"	b	secondary_start_kernel"
+		:
+		: "r" ((void *)current->thread_info + THREAD_SIZE - 8));
+}
+#endif /* CONFIG_HOTPLUG_CPU */
+
 /*
  * This is the secondary CPU boot entry.  We're using this CPUs
  * idle thread stack, but a set of temporary page tables.
@@ -179,6 +273,7 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	local_flush_tlb_all();
 
 	cpu_init();
+	preempt_disable();
 
 	/*
 	 * Give the platform a chance to do its own initialisation.
@@ -201,6 +296,11 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	cpu_set(cpu, cpu_online_map);
 
 	/*
+	 * Setup local timer for this CPU.
+	 */
+	local_timer_setup(cpu);
+
+	/*
 	 * OK, it's off to the idle thread for us
 	 */
 	cpu_idle();
@@ -236,6 +336,8 @@ void __init smp_prepare_boot_cpu(void)
 {
 	unsigned int cpu = smp_processor_id();
 
+	per_cpu(cpu_data, cpu).idle = current;
+
 	cpu_set(cpu, cpu_possible_map);
 	cpu_set(cpu, cpu_present_map);
 	cpu_set(cpu, cpu_online_map);
@@ -268,8 +370,8 @@ static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg)
  * You must not call this function with disabled interrupts, from a
  * hardware interrupt handler, nor from a bottom half handler.
  */
-int smp_call_function_on_cpu(void (*func)(void *info), void *info, int retry,
-                             int wait, cpumask_t callmap)
+static int smp_call_function_on_cpu(void (*func)(void *info), void *info,
+				    int retry, int wait, cpumask_t callmap)
 {
 	struct smp_call_struct data;
 	unsigned long timeout;
@@ -309,8 +411,8 @@ int smp_call_function_on_cpu(void (*func)(void *info), void *info, int retry,
 		printk(KERN_CRIT
 		       "CPU%u: smp_call_function timeout for %p(%p)\n"
 		       "      callmap %lx pending %lx, %swait\n",
-		       smp_processor_id(), func, info, callmap, data.pending,
-		       wait ? "" : "no ");
+		       smp_processor_id(), func, info, *cpus_addr(callmap),
+		       *cpus_addr(data.pending), wait ? "" : "no ");
 
 		/*
 		 * TRACE
@@ -363,6 +465,18 @@ void show_ipi_list(struct seq_file *p)
 	seq_putc(p, '\n');
 }
 
+void show_local_irqs(struct seq_file *p)
+{
+	unsigned int cpu;
+
+	seq_printf(p, "LOC: ");
+
+	for_each_present_cpu(cpu)
+		seq_printf(p, "%10u ", irq_stat[cpu].local_timer_irqs);
+
+	seq_putc(p, '\n');
+}
+
 static void ipi_timer(struct pt_regs *regs)
 {
 	int user = user_mode(regs);
@@ -373,6 +487,18 @@ static void ipi_timer(struct pt_regs *regs)
 	irq_exit();
 }
 
+#ifdef CONFIG_LOCAL_TIMERS
+asmlinkage void do_local_timer(struct pt_regs *regs)
+{
+	int cpu = smp_processor_id();
+
+	if (local_timer_ack()) {
+		irq_stat[cpu].local_timer_irqs++;
+		ipi_timer(regs);
+	}
+}
+#endif
+
 /*
  * ipi_call_function - handle IPI from smp_call_function()
  *
@@ -424,7 +550,7 @@ static void ipi_cpu_stop(unsigned int cpu)
  *
  *  Bit 0 - Inter-processor function call
  */
-void do_IPI(struct pt_regs *regs)
+asmlinkage void do_IPI(struct pt_regs *regs)
 {
 	unsigned int cpu = smp_processor_id();
 	struct ipi_data *ipi = &per_cpu(ipi_data, cpu);
diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c
index 42629ff84f5a..ea569ba482b1 100644
--- a/arch/arm/kernel/sys_arm.c
+++ b/arch/arm/kernel/sys_arm.c
@@ -305,7 +305,7 @@ long execve(const char *filename, char **argv, char **envp)
 		  "Ir" (THREAD_START_SP - sizeof(regs)),
 		  "r" (&regs),
 		  "Ir" (sizeof(regs))
-		: "r0", "r1", "r2", "r3", "ip", "memory");
+		: "r0", "r1", "r2", "r3", "ip", "lr", "memory");
 
  out:
 	return ret;
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 69449a818dcc..fc4729106a32 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -36,10 +36,6 @@
 #include <asm/thread_info.h>
 #include <asm/mach/time.h>
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 /*
  * Our system timer.
  */
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index e7d22dbcb691..45e9ea6cd2a5 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -198,25 +198,16 @@ void show_stack(struct task_struct *tsk, unsigned long *sp)
 	barrier();
 }
 
-DEFINE_SPINLOCK(die_lock);
-
-/*
- * This function is protected against re-entrancy.
- */
-NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
+static void __die(const char *str, int err, struct thread_info *thread, struct pt_regs *regs)
 {
-	struct task_struct *tsk = current;
+	struct task_struct *tsk = thread->task;
 	static int die_counter;
 
-	console_verbose();
-	spin_lock_irq(&die_lock);
-	bust_spinlocks(1);
-
 	printk("Internal error: %s: %x [#%d]\n", str, err, ++die_counter);
 	print_modules();
 	__show_regs(regs);
 	printk("Process %s (pid: %d, stack limit = 0x%p)\n",
-		tsk->comm, tsk->pid, tsk->thread_info + 1);
+		tsk->comm, tsk->pid, thread + 1);
 
 	if (!user_mode(regs) || in_interrupt()) {
 		dump_mem("Stack: ", regs->ARM_sp,
@@ -224,7 +215,21 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
 		dump_backtrace(regs, tsk);
 		dump_instr(regs);
 	}
+}
+
+DEFINE_SPINLOCK(die_lock);
+
+/*
+ * This function is protected against re-entrancy.
+ */
+NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
+{
+	struct thread_info *thread = current_thread_info();
 
+	console_verbose();
+	spin_lock_irq(&die_lock);
+	bust_spinlocks(1);
+	__die(str, err, thread, regs);
 	bust_spinlocks(0);
 	spin_unlock_irq(&die_lock);
 	do_exit(SIGSEGV);
@@ -345,7 +350,9 @@ static int bad_syscall(int n, struct pt_regs *regs)
 	struct thread_info *thread = current_thread_info();
 	siginfo_t info;
 
-	if (current->personality != PER_LINUX && thread->exec_domain->handler) {
+	if (current->personality != PER_LINUX &&
+	    current->personality != PER_LINUX_32BIT &&
+	    thread->exec_domain->handler) {
 		thread->exec_domain->handler(n, regs);
 		return regs->ARM_r0;
 	}
@@ -481,30 +488,34 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
 		unsigned long addr = regs->ARM_r2;
 		struct mm_struct *mm = current->mm;
 		pgd_t *pgd; pmd_t *pmd; pte_t *pte;
+		spinlock_t *ptl;
 
 		regs->ARM_cpsr &= ~PSR_C_BIT;
-		spin_lock(&mm->page_table_lock);
+		down_read(&mm->mmap_sem);
 		pgd = pgd_offset(mm, addr);
 		if (!pgd_present(*pgd))
 			goto bad_access;
 		pmd = pmd_offset(pgd, addr);
 		if (!pmd_present(*pmd))
 			goto bad_access;
-		pte = pte_offset_map(pmd, addr);
-		if (!pte_present(*pte) || !pte_write(*pte))
+		pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
+		if (!pte_present(*pte) || !pte_write(*pte)) {
+			pte_unmap_unlock(pte, ptl);
 			goto bad_access;
+		}
 		val = *(unsigned long *)addr;
 		val -= regs->ARM_r0;
 		if (val == 0) {
 			*(unsigned long *)addr = regs->ARM_r1;
 			regs->ARM_cpsr |= PSR_C_BIT;
 		}
-		spin_unlock(&mm->page_table_lock);
+		pte_unmap_unlock(pte, ptl);
+		up_read(&mm->mmap_sem);
 		return val;
 
 		bad_access:
-		spin_unlock(&mm->page_table_lock);
-		/* simulate a read access fault */
+		up_read(&mm->mmap_sem);
+		/* simulate a write access fault */
 		do_DataAbort(addr, 15 + (1 << 11), regs);
 		return -1;
 	}
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 08e58ecd44be..9a47770114d4 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -6,14 +6,23 @@
 #include <asm-generic/vmlinux.lds.h>
 #include <linux/config.h>
 #include <asm/thread_info.h>
+#include <asm/memory.h>
 	
 OUTPUT_ARCH(arm)
 ENTRY(stext)
+
 #ifndef __ARMEB__
 jiffies = jiffies_64;
 #else
 jiffies = jiffies_64 + 4;
 #endif
+
+#ifdef CONFIG_XIP_KERNEL
+#define TEXTADDR  XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
+#else
+#define TEXTADDR  KERNEL_RAM_ADDR
+#endif
+
 SECTIONS
 {
 	. = TEXTADDR;
@@ -89,20 +98,13 @@ SECTIONS
 		*(.got)			/* Global offset table		*/
 	}
 
-	. = ALIGN(16);
-	__ex_table : {			/* Exception table		*/
-		__start___ex_table = .;
-			*(__ex_table)
-		__stop___ex_table = .;
-	}
-
 	RODATA
 
 	_etext = .;			/* End of text and rodata section */
 
 #ifdef CONFIG_XIP_KERNEL
 	__data_loc = ALIGN(4);		/* location in binary */
-	. = DATAADDR;
+	. = KERNEL_RAM_ADDR;
 #else
 	. = ALIGN(THREAD_SIZE);
 	__data_loc = .;
@@ -138,6 +140,14 @@ SECTIONS
 		*(.data.cacheline_aligned)
 
 		/*
+		 * The exception fixup table (might need resorting at runtime)
+		 */
+		. = ALIGN(32);
+		__start___ex_table = .;
+		*(__ex_table)
+		__stop___ex_table = .;
+
+		/*
 		 * and the usual data section
 		 */
 		*(.data)
@@ -162,6 +172,10 @@ SECTIONS
 	.comment 0 : { *(.comment) }
 }
 
-/* those must never be empty */
+/*
+ * These must never be empty
+ * If you have to comment these two assert statements out, your
+ * binutils is too old (for other reasons as well)
+ */
 ASSERT((__proc_info_end - __proc_info_begin), "missing CPU support")
 ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined")
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 8725d63e4219..391f3ab3ff32 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -7,13 +7,27 @@
 lib-y		:= backtrace.o changebit.o csumipv6.o csumpartial.o   \
 		   csumpartialcopy.o csumpartialcopyuser.o clearbit.o \
 		   copy_page.o delay.o findbit.o memchr.o memcpy.o    \
-		   memset.o memzero.o setbit.o strncpy_from_user.o    \
-		   strnlen_user.o strchr.o strrchr.o testchangebit.o  \
-		   testclearbit.o testsetbit.o uaccess.o getuser.o    \
-		   putuser.o ashldi3.o ashrdi3.o lshrdi3.o muldi3.o   \
-		   ucmpdi2.o lib1funcs.o div64.o	              \
+		   memmove.o memset.o memzero.o setbit.o              \
+		   strncpy_from_user.o strnlen_user.o                 \
+		   strchr.o strrchr.o                                 \
+		   testchangebit.o testclearbit.o testsetbit.o        \
+		   getuser.o putuser.o clear_user.o                   \
+		   ashldi3.o ashrdi3.o lshrdi3.o muldi3.o             \
+		   ucmpdi2.o lib1funcs.o div64.o sha1.o               \
 		   io-readsb.o io-writesb.o io-readsl.o io-writesl.o
 
+# the code in uaccess.S is not preemption safe and
+# probably faster on ARMv3 only
+ifeq ($CONFIG_PREEMPT,y)
+  lib-y	+= copy_from_user.o copy_to_user.o
+else
+ifneq ($(CONFIG_CPU_32v3),y)
+  lib-y	+= copy_from_user.o copy_to_user.o
+else
+  lib-y	+= uaccess.o
+endif
+endif
+
 ifeq ($(CONFIG_CPU_32v3),y)
   lib-y	+= io-readsw-armv3.o io-writesw-armv3.o
 else
diff --git a/arch/arm/lib/ashldi3.S b/arch/arm/lib/ashldi3.S
new file mode 100644
index 000000000000..561e20717b30
--- /dev/null
+++ b/arch/arm/lib/ashldi3.S
@@ -0,0 +1,48 @@
+/* Copyright 1995, 1996, 1998, 1999, 2000, 2003, 2004, 2005
+   Free Software Foundation, Inc.
+
+This file is free software; you can redistribute it and/or modify it
+under the terms of the GNU General Public License as published by the
+Free Software Foundation; either version 2, or (at your option) any
+later version.
+
+In addition to the permissions in the GNU General Public License, the
+Free Software Foundation gives you unlimited permission to link the
+compiled version of this file into combinations with other programs,
+and to distribute those combinations without any restriction coming
+from the use of this file.  (The General Public License restrictions
+do apply in other respects; for example, they cover modification of
+the file, and distribution when not linked into a combine
+executable.)
+
+This file is distributed in the hope that it will be useful, but
+WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; see the file COPYING.  If not, write to
+the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+Boston, MA 02110-1301, USA.  */
+
+
+#include <linux/linkage.h>
+
+#ifdef __ARMEB__
+#define al r1
+#define ah r0
+#else
+#define al r0
+#define ah r1
+#endif
+
+ENTRY(__ashldi3)
+
+	subs	r3, r2, #32
+	rsb	ip, r2, #32
+	movmi	ah, ah, lsl r2
+	movpl	ah, al, lsl r3
+	orrmi	ah, ah, al, lsr ip
+	mov	al, al, lsl r2
+	mov	pc, lr
+
diff --git a/arch/arm/lib/ashldi3.c b/arch/arm/lib/ashldi3.c
deleted file mode 100644
index b62875cfd8f8..000000000000
--- a/arch/arm/lib/ashldi3.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/* More subroutines needed by GCC output code on some machines.  */
-/* Compile this one with gcc.  */
-/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-/* As a special exception, if you link this library with other files,
-   some of which are compiled with GCC, to produce an executable,
-   this library does not by itself cause the resulting executable
-   to be covered by the GNU General Public License.
-   This exception does not however invalidate any other reasons why
-   the executable file might be covered by the GNU General Public License.
- */
-/* support functions required by the kernel. based on code from gcc-2.95.3 */
-/* I Molton	29/07/01 */
-
-#include "gcclib.h"
-
-s64 __ashldi3(s64 u, int b)
-{
-	DIunion w;
-	int bm;
-	DIunion uu;
-
-	if (b == 0)
-		return u;
-
-	uu.ll = u;
-
-	bm = (sizeof(s32) * BITS_PER_UNIT) - b;
-	if (bm <= 0) {
-		w.s.low = 0;
-		w.s.high = (u32) uu.s.low << -bm;
-	} else {
-		u32 carries = (u32) uu.s.low >> bm;
-		w.s.low = (u32) uu.s.low << b;
-		w.s.high = ((u32) uu.s.high << b) | carries;
-	}
-
-	return w.ll;
-}
diff --git a/arch/arm/lib/ashrdi3.S b/arch/arm/lib/ashrdi3.S
new file mode 100644
index 000000000000..86fb2a90c301
--- /dev/null
+++ b/arch/arm/lib/ashrdi3.S
@@ -0,0 +1,48 @@
+/* Copyright 1995, 1996, 1998, 1999, 2000, 2003, 2004, 2005
+   Free Software Foundation, Inc.
+
+This file is free software; you can redistribute it and/or modify it
+under the terms of the GNU General Public License as published by the
+Free Software Foundation; either version 2, or (at your option) any
+later version.
+
+In addition to the permissions in the GNU General Public License, the
+Free Software Foundation gives you unlimited permission to link the
+compiled version of this file into combinations with other programs,
+and to distribute those combinations without any restriction coming
+from the use of this file.  (The General Public License restrictions
+do apply in other respects; for example, they cover modification of
+the file, and distribution when not linked into a combine
+executable.)
+
+This file is distributed in the hope that it will be useful, but
+WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; see the file COPYING.  If not, write to
+the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+Boston, MA 02110-1301, USA.  */
+
+
+#include <linux/linkage.h>
+
+#ifdef __ARMEB__
+#define al r1
+#define ah r0
+#else
+#define al r0
+#define ah r1
+#endif
+
+ENTRY(__ashrdi3)
+
+	subs	r3, r2, #32
+	rsb	ip, r2, #32
+	movmi	al, al, lsr r2
+	movpl	al, ah, asr r3
+	orrmi	al, al, ah, lsl ip
+	mov	ah, ah, asr r2
+	mov	pc, lr
+
diff --git a/arch/arm/lib/ashrdi3.c b/arch/arm/lib/ashrdi3.c
deleted file mode 100644
index 9a8600a7543f..000000000000
--- a/arch/arm/lib/ashrdi3.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/* More subroutines needed by GCC output code on some machines.  */
-/* Compile this one with gcc.  */
-/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-/* As a special exception, if you link this library with other files,
-   some of which are compiled with GCC, to produce an executable,
-   this library does not by itself cause the resulting executable
-   to be covered by the GNU General Public License.
-   This exception does not however invalidate any other reasons why
-   the executable file might be covered by the GNU General Public License.
- */
-/* support functions required by the kernel. based on code from gcc-2.95.3 */
-/* I Molton     29/07/01 */
-
-#include "gcclib.h"
-
-s64 __ashrdi3(s64 u, int b)
-{
-	DIunion w;
-	int bm;
-	DIunion uu;
-
-	if (b == 0)
-		return u;
-
-	uu.ll = u;
-
-	bm = (sizeof(s32) * BITS_PER_UNIT) - b;
-	if (bm <= 0) {
-		/* w.s.high = 1..1 or 0..0 */
-		w.s.high = uu.s.high >> (sizeof(s32) * BITS_PER_UNIT - 1);
-		w.s.low = uu.s.high >> -bm;
-	} else {
-		u32 carries = (u32) uu.s.high << bm;
-		w.s.high = uu.s.high >> b;
-		w.s.low = ((u32) uu.s.low >> b) | carries;
-	}
-
-	return w.ll;
-}
diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h
index 64a988c1ad44..b8c14e936697 100644
--- a/arch/arm/lib/bitops.h
+++ b/arch/arm/lib/bitops.h
@@ -1,6 +1,6 @@
 #include <linux/config.h>
 
-#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_CPU_MPCORE)
+#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_CPU_32v6K)
 	.macro	bitop, instr
 	mov	r2, #1
 	and	r3, r0, #7		@ Get bit offset
@@ -34,7 +34,7 @@
 	and	r2, r0, #7
 	mov	r3, #1
 	mov	r3, r3, lsl r2
-	save_and_disable_irqs ip, r2
+	save_and_disable_irqs ip
 	ldrb	r2, [r1, r0, lsr #3]
 	\instr	r2, r2, r3
 	strb	r2, [r1, r0, lsr #3]
@@ -54,7 +54,7 @@
 	add	r1, r1, r0, lsr #3
 	and	r3, r0, #7
 	mov	r0, #1
-	save_and_disable_irqs ip, r2
+	save_and_disable_irqs ip
 	ldrb	r2, [r1]
 	tst	r2, r0, lsl r3
 	\instr	r2, r2, r0, lsl r3
diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S
new file mode 100644
index 000000000000..7ff9f831b3f9
--- /dev/null
+++ b/arch/arm/lib/clear_user.S
@@ -0,0 +1,52 @@
+/*
+ *  linux/arch/arm/lib/clear_user.S
+ *
+ *  Copyright (C) 1995, 1996,1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+		.text
+
+/* Prototype: int __arch_clear_user(void *addr, size_t sz)
+ * Purpose  : clear some user memory
+ * Params   : addr - user memory address to clear
+ *          : sz   - number of bytes to clear
+ * Returns  : number of bytes NOT cleared
+ */
+ENTRY(__arch_clear_user)
+		stmfd	sp!, {r1, lr}
+		mov	r2, #0
+		cmp	r1, #4
+		blt	2f
+		ands	ip, r0, #3
+		beq	1f
+		cmp	ip, #2
+USER(		strbt	r2, [r0], #1)
+USER(		strlebt	r2, [r0], #1)
+USER(		strltbt	r2, [r0], #1)
+		rsb	ip, ip, #4
+		sub	r1, r1, ip		@  7  6  5  4  3  2  1
+1:		subs	r1, r1, #8		@ -1 -2 -3 -4 -5 -6 -7
+USER(		strplt	r2, [r0], #4)
+USER(		strplt	r2, [r0], #4)
+		bpl	1b
+		adds	r1, r1, #4		@  3  2  1  0 -1 -2 -3
+USER(		strplt	r2, [r0], #4)
+2:		tst	r1, #2			@ 1x 1x 0x 0x 1x 1x 0x
+USER(		strnebt	r2, [r0], #1)
+USER(		strnebt	r2, [r0], #1)
+		tst	r1, #1			@ x1 x0 x1 x0 x1 x0 x1
+USER(		strnebt	r2, [r0], #1)
+		mov	r0, #0
+		LOADREGS(fd,sp!, {r1, pc})
+
+		.section .fixup,"ax"
+		.align	0
+9001:		LOADREGS(fd,sp!, {r0, pc})
+		.previous
+
diff --git a/arch/arm/lib/copy_from_user.S b/arch/arm/lib/copy_from_user.S
new file mode 100644
index 000000000000..7497393a0e81
--- /dev/null
+++ b/arch/arm/lib/copy_from_user.S
@@ -0,0 +1,101 @@
+/*
+ *  linux/arch/arm/lib/copy_from_user.S
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Sep 29, 2005
+ *  Copyright:	MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Prototype:
+ *
+ *	size_t __arch_copy_from_user(void *to, const void *from, size_t n)
+ *
+ * Purpose:
+ *
+ *	copy a block to kernel memory from user memory
+ *
+ * Params:
+ *
+ *	to = kernel memory
+ *	from = user memory
+ *	n = number of bytes to copy
+ *
+ * Return value:
+ *
+ *	Number of bytes NOT copied.
+ */
+
+	.macro ldr1w ptr reg abort
+100:	ldrt \reg, [\ptr], #4
+	.section __ex_table, "a"
+	.long 100b, \abort
+	.previous
+	.endm
+
+	.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
+	ldr1w \ptr, \reg1, \abort
+	ldr1w \ptr, \reg2, \abort
+	ldr1w \ptr, \reg3, \abort
+	ldr1w \ptr, \reg4, \abort
+	.endm
+
+	.macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
+	ldr4w \ptr, \reg1, \reg2, \reg3, \reg4, \abort
+	ldr4w \ptr, \reg5, \reg6, \reg7, \reg8, \abort
+	.endm
+
+	.macro ldr1b ptr reg cond=al abort
+100:	ldr\cond\()bt \reg, [\ptr], #1
+	.section __ex_table, "a"
+	.long 100b, \abort
+	.previous
+	.endm
+
+	.macro str1w ptr reg abort
+	str \reg, [\ptr], #4
+	.endm
+
+	.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
+	stmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8}
+	.endm
+
+	.macro str1b ptr reg cond=al abort
+	str\cond\()b \reg, [\ptr], #1
+	.endm
+
+	.macro enter reg1 reg2
+	mov	r3, #0
+	stmdb	sp!, {r0, r2, r3, \reg1, \reg2}
+	.endm
+
+	.macro exit reg1 reg2
+	add	sp, sp, #8
+	ldmfd	sp!, {r0, \reg1, \reg2}
+	.endm
+
+	.text
+
+ENTRY(__arch_copy_from_user)
+
+#include "copy_template.S"
+
+	.section .fixup,"ax"
+	.align 0
+	copy_abort_preamble
+	ldmfd	sp!, {r1, r2}
+	sub	r3, r0, r1
+	rsb	r1, r3, r2
+	str	r1, [sp]
+	bl	__memzero
+	ldr	r0, [sp], #4
+	copy_abort_end
+	.previous
+
diff --git a/arch/arm/lib/copy_template.S b/arch/arm/lib/copy_template.S
new file mode 100644
index 000000000000..838e435e4922
--- /dev/null
+++ b/arch/arm/lib/copy_template.S
@@ -0,0 +1,255 @@
+/*
+ *  linux/arch/arm/lib/copy_template.s
+ *
+ *  Code template for optimized memory copy functions
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Sep 28, 2005
+ *  Copyright:	MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+/*
+ * This can be used to enable code to cacheline align the source pointer.
+ * Experiments on tested architectures (StrongARM and XScale) didn't show
+ * this a worthwhile thing to do.  That might be different in the future.
+ */
+//#define CALGN(code...)	code
+#define CALGN(code...)
+
+/*
+ * Theory of operation
+ * -------------------
+ *
+ * This file provides the core code for a forward memory copy used in
+ * the implementation of memcopy(), copy_to_user() and copy_from_user().
+ *
+ * The including file must define the following accessor macros
+ * according to the need of the given function:
+ *
+ * ldr1w ptr reg abort
+ *
+ *	This loads one word from 'ptr', stores it in 'reg' and increments
+ *	'ptr' to the next word. The 'abort' argument is used for fixup tables.
+ *
+ * ldr4w ptr reg1 reg2 reg3 reg4 abort
+ * ldr8w ptr, reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
+ *
+ *	This loads four or eight words starting from 'ptr', stores them
+ *	in provided registers and increments 'ptr' past those words.
+ *	The'abort' argument is used for fixup tables.
+ *
+ * ldr1b ptr reg cond abort
+ *
+ *	Similar to ldr1w, but it loads a byte and increments 'ptr' one byte.
+ *	It also must apply the condition code if provided, otherwise the
+ *	"al" condition is assumed by default.
+ *
+ * str1w ptr reg abort
+ * str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
+ * str1b ptr reg cond abort
+ *
+ *	Same as their ldr* counterparts, but data is stored to 'ptr' location
+ *	rather than being loaded.
+ *
+ * enter reg1 reg2
+ *
+ *	Preserve the provided registers on the stack plus any additional
+ *	data as needed by the implementation including this code. Called
+ *	upon code entry.
+ *
+ * exit reg1 reg2
+ *
+ *	Restore registers with the values previously saved with the
+ *	'preserv' macro. Called upon code termination.
+ */
+
+
+		enter	r4, lr
+
+		subs	r2, r2, #4
+		blt	8f
+		ands	ip, r0, #3
+	PLD(	pld	[r1, #0]		)
+		bne	9f
+		ands	ip, r1, #3
+		bne	10f
+
+1:		subs	r2, r2, #(28)
+		stmfd	sp!, {r5 - r8}
+		blt	5f
+
+	CALGN(	ands	ip, r1, #31		)
+	CALGN(	rsb	r3, ip, #32		)
+	CALGN(	sbcnes	r4, r3, r2		)  @ C is always set here
+	CALGN(	bcs	2f			)
+	CALGN(	adr	r4, 6f			)
+	CALGN(	subs	r2, r2, r3		)  @ C gets set
+	CALGN(	add	pc, r4, ip		)
+
+	PLD(	pld	[r1, #0]		)
+2:	PLD(	subs	r2, r2, #96		)
+	PLD(	pld	[r1, #28]		)
+	PLD(	blt	4f			)
+	PLD(	pld	[r1, #60]		)
+	PLD(	pld	[r1, #92]		)
+
+3:	PLD(	pld	[r1, #124]		)
+4:		ldr8w	r1, r3, r4, r5, r6, r7, r8, ip, lr, abort=20f
+		subs	r2, r2, #32
+		str8w	r0, r3, r4, r5, r6, r7, r8, ip, lr, abort=20f
+		bge	3b
+	PLD(	cmn	r2, #96			)
+	PLD(	bge	4b			)
+
+5:		ands	ip, r2, #28
+		rsb	ip, ip, #32
+		addne	pc, pc, ip		@ C is always clear here
+		b	7f
+6:		nop
+		ldr1w	r1, r3, abort=20f
+		ldr1w	r1, r4, abort=20f
+		ldr1w	r1, r5, abort=20f
+		ldr1w	r1, r6, abort=20f
+		ldr1w	r1, r7, abort=20f
+		ldr1w	r1, r8, abort=20f
+		ldr1w	r1, lr, abort=20f
+
+		add	pc, pc, ip
+		nop
+		nop
+		str1w	r0, r3, abort=20f
+		str1w	r0, r4, abort=20f
+		str1w	r0, r5, abort=20f
+		str1w	r0, r6, abort=20f
+		str1w	r0, r7, abort=20f
+		str1w	r0, r8, abort=20f
+		str1w	r0, lr, abort=20f
+
+	CALGN(	bcs	2b			)
+
+7:		ldmfd	sp!, {r5 - r8}
+
+8:		movs	r2, r2, lsl #31
+		ldr1b	r1, r3, ne, abort=21f
+		ldr1b	r1, r4, cs, abort=21f
+		ldr1b	r1, ip, cs, abort=21f
+		str1b	r0, r3, ne, abort=21f
+		str1b	r0, r4, cs, abort=21f
+		str1b	r0, ip, cs, abort=21f
+
+		exit	r4, pc
+
+9:		rsb	ip, ip, #4
+		cmp	ip, #2
+		ldr1b	r1, r3, gt, abort=21f
+		ldr1b	r1, r4, ge, abort=21f
+		ldr1b	r1, lr, abort=21f
+		str1b	r0, r3, gt, abort=21f
+		str1b	r0, r4, ge, abort=21f
+		subs	r2, r2, ip
+		str1b	r0, lr, abort=21f
+		blt	8b
+		ands	ip, r1, #3
+		beq	1b
+
+10:		bic	r1, r1, #3
+		cmp	ip, #2
+		ldr1w	r1, lr, abort=21f
+		beq	17f
+		bgt	18f
+
+
+		.macro	forward_copy_shift pull push
+
+		subs	r2, r2, #28
+		blt	14f
+
+	CALGN(	ands	ip, r1, #31		)
+	CALGN(	rsb	ip, ip, #32		)
+	CALGN(	sbcnes	r4, ip, r2		)  @ C is always set here
+	CALGN(	subcc	r2, r2, ip		)
+	CALGN(	bcc	15f			)
+
+11:		stmfd	sp!, {r5 - r9}
+
+	PLD(	pld	[r1, #0]		)
+	PLD(	subs	r2, r2, #96		)
+	PLD(	pld	[r1, #28]		)
+	PLD(	blt	13f			)
+	PLD(	pld	[r1, #60]		)
+	PLD(	pld	[r1, #92]		)
+
+12:	PLD(	pld	[r1, #124]		)
+13:		ldr4w	r1, r4, r5, r6, r7, abort=19f
+		mov	r3, lr, pull #\pull
+		subs	r2, r2, #32
+		ldr4w	r1, r8, r9, ip, lr, abort=19f
+		orr	r3, r3, r4, push #\push
+		mov	r4, r4, pull #\pull
+		orr	r4, r4, r5, push #\push
+		mov	r5, r5, pull #\pull
+		orr	r5, r5, r6, push #\push
+		mov	r6, r6, pull #\pull
+		orr	r6, r6, r7, push #\push
+		mov	r7, r7, pull #\pull
+		orr	r7, r7, r8, push #\push
+		mov	r8, r8, pull #\pull
+		orr	r8, r8, r9, push #\push
+		mov	r9, r9, pull #\pull
+		orr	r9, r9, ip, push #\push
+		mov	ip, ip, pull #\pull
+		orr	ip, ip, lr, push #\push
+		str8w	r0, r3, r4, r5, r6, r7, r8, r9, ip, , abort=19f
+		bge	12b
+	PLD(	cmn	r2, #96			)
+	PLD(	bge	13b			)
+
+		ldmfd	sp!, {r5 - r9}
+
+14:		ands	ip, r2, #28
+		beq	16f
+
+15:		mov	r3, lr, pull #\pull
+		ldr1w	r1, lr, abort=21f
+		subs	ip, ip, #4
+		orr	r3, r3, lr, push #\push
+		str1w	r0, r3, abort=21f
+		bgt	15b
+	CALGN(	cmp	r2, #0			)
+	CALGN(	bge	11b			)
+
+16:		sub	r1, r1, #(\push / 8)
+		b	8b
+
+		.endm
+
+
+		forward_copy_shift	pull=8	push=24
+
+17:		forward_copy_shift	pull=16	push=16
+
+18:		forward_copy_shift	pull=24	push=8
+
+
+/*
+ * Abort preanble and completion macros.
+ * If a fixup handler is required then those macros must surround it.
+ * It is assumed that the fixup code will handle the private part of
+ * the exit macro.
+ */
+
+	.macro	copy_abort_preamble
+19:	ldmfd	sp!, {r5 - r9}
+	b	21f
+20:	ldmfd	sp!, {r5 - r8}
+21:
+	.endm
+
+	.macro	copy_abort_end
+	ldmfd	sp!, {r4, pc}
+	.endm
+
diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S
new file mode 100644
index 000000000000..4a6d8ea14022
--- /dev/null
+++ b/arch/arm/lib/copy_to_user.S
@@ -0,0 +1,101 @@
+/*
+ *  linux/arch/arm/lib/copy_to_user.S
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Sep 29, 2005
+ *  Copyright:	MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Prototype:
+ *
+ *	size_t __arch_copy_to_user(void *to, const void *from, size_t n)
+ *
+ * Purpose:
+ *
+ *	copy a block to user memory from kernel memory
+ *
+ * Params:
+ *
+ *	to = user memory
+ *	from = kernel memory
+ *	n = number of bytes to copy
+ *
+ * Return value:
+ *
+ *	Number of bytes NOT copied.
+ */
+
+	.macro ldr1w ptr reg abort
+	ldr \reg, [\ptr], #4
+	.endm
+
+	.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
+	ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4}
+	.endm
+
+	.macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
+	ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8}
+	.endm
+
+	.macro ldr1b ptr reg cond=al abort
+	ldr\cond\()b \reg, [\ptr], #1
+	.endm
+
+	.macro str1w ptr reg abort
+100:	strt \reg, [\ptr], #4
+	.section __ex_table, "a"
+	.long 100b, \abort
+	.previous
+	.endm
+
+	.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
+	str1w \ptr, \reg1, \abort
+	str1w \ptr, \reg2, \abort
+	str1w \ptr, \reg3, \abort
+	str1w \ptr, \reg4, \abort
+	str1w \ptr, \reg5, \abort
+	str1w \ptr, \reg6, \abort
+	str1w \ptr, \reg7, \abort
+	str1w \ptr, \reg8, \abort
+	.endm
+
+	.macro str1b ptr reg cond=al abort
+100:	str\cond\()bt \reg, [\ptr], #1
+	.section __ex_table, "a"
+	.long 100b, \abort
+	.previous
+	.endm
+
+	.macro enter reg1 reg2
+	mov	r3, #0
+	stmdb	sp!, {r0, r2, r3, \reg1, \reg2}
+	.endm
+
+	.macro exit reg1 reg2
+	add	sp, sp, #8
+	ldmfd	sp!, {r0, \reg1, \reg2}
+	.endm
+
+	.text
+
+ENTRY(__arch_copy_to_user)
+
+#include "copy_template.S"
+
+	.section .fixup,"ax"
+	.align 0
+	copy_abort_preamble
+	ldmfd	sp!, {r1, r2, r3}
+	sub	r0, r0, r1
+	rsb	r0, r0, r2
+	copy_abort_end
+	.previous
+
diff --git a/arch/arm/lib/csumpartial.S b/arch/arm/lib/csumpartial.S
index cb5e3708f118..a78dae5a7b28 100644
--- a/arch/arm/lib/csumpartial.S
+++ b/arch/arm/lib/csumpartial.S
@@ -26,7 +26,7 @@ td1	.req	r4	@ save before use
 td2	.req	r5	@ save before use
 td3	.req	lr
 
-.zero:		mov	r0, sum
+.Lzero:		mov	r0, sum
 		add	sp, sp, #4
 		ldr	pc, [sp], #4
 
@@ -34,21 +34,22 @@ td3	.req	lr
 		 * Handle 0 to 7 bytes, with any alignment of source and
 		 * destination pointers.  Note that when we get here, C = 0
 		 */
-.less8:		teq	len, #0			@ check for zero count
-		beq	.zero
+.Lless8:		teq	len, #0			@ check for zero count
+		beq	.Lzero
 
 		/* we must have at least one byte. */
 		tst	buf, #1			@ odd address?
+		movne	sum, sum, ror #8
 		ldrneb	td0, [buf], #1
 		subne	len, len, #1
 		adcnes	sum, sum, td0, put_byte_1
 
-.less4:		tst	len, #6
-		beq	.less8_byte
+.Lless4:		tst	len, #6
+		beq	.Lless8_byte
 
 		/* we are now half-word aligned */
 
-.less8_wordlp:
+.Lless8_wordlp:
 #if __LINUX_ARM_ARCH__ >= 4
 		ldrh	td0, [buf], #2
 		sub	len, len, #2
@@ -64,19 +65,19 @@ td3	.req	lr
 #endif
 		adcs	sum, sum, td0
 		tst	len, #6
-		bne	.less8_wordlp
+		bne	.Lless8_wordlp
 
-.less8_byte:	tst	len, #1			@ odd number of bytes
+.Lless8_byte:	tst	len, #1			@ odd number of bytes
 		ldrneb	td0, [buf], #1		@ include last byte
 		adcnes	sum, sum, td0, put_byte_0	@ update checksum
 
-.done:		adc	r0, sum, #0		@ collect up the last carry
+.Ldone:		adc	r0, sum, #0		@ collect up the last carry
 		ldr	td0, [sp], #4
 		tst	td0, #1			@ check buffer alignment
 		movne	r0, r0, ror #8		@ rotate checksum by 8 bits
 		ldr	pc, [sp], #4		@ return
 
-.not_aligned:	tst	buf, #1			@ odd address
+.Lnot_aligned:	tst	buf, #1			@ odd address
 		ldrneb	td0, [buf], #1		@ make even
 		subne	len, len, #1
 		adcnes	sum, sum, td0, put_byte_1	@ update checksum
@@ -101,11 +102,14 @@ td3	.req	lr
 ENTRY(csum_partial)
 		stmfd	sp!, {buf, lr}
 		cmp	len, #8			@ Ensure that we have at least
-		blo	.less8			@ 8 bytes to copy.
+		blo	.Lless8			@ 8 bytes to copy.
+
+		tst	buf, #1
+		movne	sum, sum, ror #8
 
 		adds	sum, sum, #0		@ C = 0
 		tst	buf, #3			@ Test destination alignment
-		blne	.not_aligned		@ aligh destination, return here
+		blne	.Lnot_aligned		@ align destination, return here
 
 1:		bics	ip, len, #31
 		beq	3f
@@ -127,11 +131,11 @@ ENTRY(csum_partial)
 		ldmfd	sp!, {r4 - r5}
 
 3:		tst	len, #0x1c		@ should not change C
-		beq	.less4
+		beq	.Lless4
 
 4:		ldr	td0, [buf], #4
 		sub	len, len, #4
 		adcs	sum, sum, td0
 		tst	len, #0x1c
 		bne	4b
-		b	.less4
+		b	.Lless4
diff --git a/arch/arm/lib/csumpartialcopygeneric.S b/arch/arm/lib/csumpartialcopygeneric.S
index d3a2f4667db4..4a4609c19095 100644
--- a/arch/arm/lib/csumpartialcopygeneric.S
+++ b/arch/arm/lib/csumpartialcopygeneric.S
@@ -22,7 +22,7 @@ dst	.req	r1
 len	.req	r2
 sum	.req	r3
 
-.zero:		mov	r0, sum
+.Lzero:		mov	r0, sum
 		load_regs	ea
 
 		/*
@@ -31,8 +31,9 @@ sum	.req	r3
 		 * the length.  Note that the source pointer hasn't been
 		 * aligned yet.
 		 */
-.dst_unaligned:	tst	dst, #1
-		beq	.dst_16bit
+.Ldst_unaligned:
+		tst	dst, #1
+		beq	.Ldst_16bit
 
 		load1b	ip
 		sub	len, len, #1
@@ -41,7 +42,7 @@ sum	.req	r3
 		tst	dst, #2
 		moveq	pc, lr			@ dst is now 32bit aligned
 
-.dst_16bit:	load2b	r8, ip
+.Ldst_16bit:	load2b	r8, ip
 		sub	len, len, #2
 		adcs	sum, sum, r8, put_byte_0
 		strb	r8, [dst], #1
@@ -53,12 +54,12 @@ sum	.req	r3
 		 * Handle 0 to 7 bytes, with any alignment of source and
 		 * destination pointers.  Note that when we get here, C = 0
 		 */
-.less8:		teq	len, #0			@ check for zero count
-		beq	.zero
+.Lless8:	teq	len, #0			@ check for zero count
+		beq	.Lzero
 
 		/* we must have at least one byte. */
 		tst	dst, #1			@ dst 16-bit aligned
-		beq	.less8_aligned
+		beq	.Lless8_aligned
 
 		/* Align dst */
 		load1b	ip
@@ -66,7 +67,7 @@ sum	.req	r3
 		adcs	sum, sum, ip, put_byte_1	@ update checksum
 		strb	ip, [dst], #1
 		tst	len, #6
-		beq	.less8_byteonly
+		beq	.Lless8_byteonly
 
 1:		load2b	r8, ip
 		sub	len, len, #2
@@ -74,15 +75,16 @@ sum	.req	r3
 		strb	r8, [dst], #1
 		adcs	sum, sum, ip, put_byte_1
 		strb	ip, [dst], #1
-.less8_aligned:	tst	len, #6
+.Lless8_aligned:
+		tst	len, #6
 		bne	1b
-.less8_byteonly:
+.Lless8_byteonly:
 		tst	len, #1
-		beq	.done
+		beq	.Ldone
 		load1b	r8
 		adcs	sum, sum, r8, put_byte_0	@ update checksum
 		strb	r8, [dst], #1
-		b	.done
+		b	.Ldone
 
 FN_ENTRY
 		mov	ip, sp
@@ -90,11 +92,11 @@ FN_ENTRY
 		sub	fp, ip, #4
 
 		cmp	len, #8			@ Ensure that we have at least
-		blo	.less8			@ 8 bytes to copy.
+		blo	.Lless8			@ 8 bytes to copy.
 
 		adds	sum, sum, #0		@ C = 0
 		tst	dst, #3			@ Test destination alignment
-		blne	.dst_unaligned		@ align destination, return here
+		blne	.Ldst_unaligned		@ align destination, return here
 
 		/*
 		 * Ok, the dst pointer is now 32bit aligned, and we know
@@ -103,7 +105,7 @@ FN_ENTRY
 		 */
 
 		tst	src, #3			@ Test source alignment
-		bne	.src_not_aligned
+		bne	.Lsrc_not_aligned
 
 		/* Routine for src & dst aligned */
 
@@ -136,17 +138,17 @@ FN_ENTRY
 		adcs	sum, sum, r4
 
 4:		ands	len, len, #3
-		beq	.done
+		beq	.Ldone
 		load1l	r4
 		tst	len, #2
 		mov	r5, r4, get_byte_0
-		beq	.exit
+		beq	.Lexit
 		adcs	sum, sum, r4, push #16
 		strb	r5, [dst], #1
 		mov	r5, r4, get_byte_1
 		strb	r5, [dst], #1
 		mov	r5, r4, get_byte_2
-.exit:		tst	len, #1
+.Lexit:		tst	len, #1
 		strneb	r5, [dst], #1
 		andne	r5, r5, #255
 		adcnes	sum, sum, r5, put_byte_0
@@ -157,20 +159,20 @@ FN_ENTRY
 		 * the inefficient byte manipulations in the
 		 * architecture independent code.
 		 */
-.done:		adc	r0, sum, #0
+.Ldone:		adc	r0, sum, #0
 		ldr	sum, [sp, #0]		@ dst
 		tst	sum, #1
 		movne	r0, r0, ror #8
 		load_regs	ea
 
-.src_not_aligned:
+.Lsrc_not_aligned:
 		adc	sum, sum, #0		@ include C from dst alignment
 		and	ip, src, #3
 		bic	src, src, #3
 		load1l	r5
 		cmp	ip, #2
-		beq	.src2_aligned
-		bhi	.src3_aligned
+		beq	.Lsrc2_aligned
+		bhi	.Lsrc3_aligned
 		mov	r4, r5, pull #8		@ C = 0
 		bics	ip, len, #15
 		beq	2f
@@ -211,18 +213,18 @@ FN_ENTRY
 		adcs	sum, sum, r4
 		mov	r4, r5, pull #8
 4:		ands	len, len, #3
-		beq	.done
+		beq	.Ldone
 		mov	r5, r4, get_byte_0
 		tst	len, #2
-		beq	.exit
+		beq	.Lexit
 		adcs	sum, sum, r4, push #16
 		strb	r5, [dst], #1
 		mov	r5, r4, get_byte_1
 		strb	r5, [dst], #1
 		mov	r5, r4, get_byte_2
-		b	.exit
+		b	.Lexit
 
-.src2_aligned:	mov	r4, r5, pull #16
+.Lsrc2_aligned:	mov	r4, r5, pull #16
 		adds	sum, sum, #0
 		bics	ip, len, #15
 		beq	2f
@@ -263,20 +265,20 @@ FN_ENTRY
 		adcs	sum, sum, r4
 		mov	r4, r5, pull #16
 4:		ands	len, len, #3
-		beq	.done
+		beq	.Ldone
 		mov	r5, r4, get_byte_0
 		tst	len, #2
-		beq	.exit
+		beq	.Lexit
 		adcs	sum, sum, r4
 		strb	r5, [dst], #1
 		mov	r5, r4, get_byte_1
 		strb	r5, [dst], #1
 		tst	len, #1
-		beq	.done
+		beq	.Ldone
 		load1b	r5
-		b	.exit
+		b	.Lexit
 
-.src3_aligned:	mov	r4, r5, pull #24
+.Lsrc3_aligned:	mov	r4, r5, pull #24
 		adds	sum, sum, #0
 		bics	ip, len, #15
 		beq	2f
@@ -317,10 +319,10 @@ FN_ENTRY
 		adcs	sum, sum, r4
 		mov	r4, r5, pull #24
 4:		ands	len, len, #3
-		beq	.done
+		beq	.Ldone
 		mov	r5, r4, get_byte_0
 		tst	len, #2
-		beq	.exit
+		beq	.Lexit
 		strb	r5, [dst], #1
 		adcs	sum, sum, r4
 		load1l	r4
@@ -328,4 +330,4 @@ FN_ENTRY
 		strb	r5, [dst], #1
 		adcs	sum, sum, r4, push #24
 		mov	r5, r4, get_byte_1
-		b	.exit
+		b	.Lexit
diff --git a/arch/arm/lib/delay.S b/arch/arm/lib/delay.S
index 3c7f7e675dd8..b3fb475b4120 100644
--- a/arch/arm/lib/delay.S
+++ b/arch/arm/lib/delay.S
@@ -11,7 +11,7 @@
 #include <asm/assembler.h>
 		.text
 
-LC0:		.word	loops_per_jiffy
+.LC0:		.word	loops_per_jiffy
 
 /*
  * 0 <= r0 <= 2000
@@ -21,7 +21,7 @@ ENTRY(__udelay)
 		orr	r2, r2, #0x00db
 		mul	r0, r2, r0
 ENTRY(__const_udelay)				@ 0 <= r0 <= 0x01ffffff
-		ldr	r2, LC0
+		ldr	r2, .LC0
 		ldr	r2, [r2]		@ max = 0x0fffffff
 		mov	r0, r0, lsr #11		@ max = 0x00003fff
 		mov	r2, r2, lsr #11		@ max = 0x0003ffff
diff --git a/arch/arm/lib/findbit.S b/arch/arm/lib/findbit.S
index f055d56ea68a..6f8e27a58c78 100644
--- a/arch/arm/lib/findbit.S
+++ b/arch/arm/lib/findbit.S
@@ -27,7 +27,7 @@ ENTRY(_find_first_zero_bit_le)
 		mov	r2, #0
 1:		ldrb	r3, [r0, r2, lsr #3]
 		eors	r3, r3, #0xff		@ invert bits
-		bne	.found			@ any now set - found zero bit
+		bne	.L_found		@ any now set - found zero bit
 		add	r2, r2, #8		@ next bit pointer
 2:		cmp	r2, r1			@ any more?
 		blo	1b
@@ -46,7 +46,7 @@ ENTRY(_find_next_zero_bit_le)
 		ldrb	r3, [r0, r2, lsr #3]
 		eor	r3, r3, #0xff		@ now looking for a 1 bit
 		movs	r3, r3, lsr ip		@ shift off unused bits
-		bne	.found
+		bne	.L_found
 		orr	r2, r2, #7		@ if zero, then no bits here
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
@@ -61,7 +61,7 @@ ENTRY(_find_first_bit_le)
 		mov	r2, #0
 1:		ldrb	r3, [r0, r2, lsr #3]
 		movs	r3, r3
-		bne	.found			@ any now set - found zero bit
+		bne	.L_found		@ any now set - found zero bit
 		add	r2, r2, #8		@ next bit pointer
 2:		cmp	r2, r1			@ any more?
 		blo	1b
@@ -79,7 +79,7 @@ ENTRY(_find_next_bit_le)
 		beq	1b			@ If new byte, goto old routine
 		ldrb	r3, [r0, r2, lsr #3]
 		movs	r3, r3, lsr ip		@ shift off unused bits
-		bne	.found
+		bne	.L_found
 		orr	r2, r2, #7		@ if zero, then no bits here
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
@@ -93,7 +93,7 @@ ENTRY(_find_first_zero_bit_be)
 1:		eor	r3, r2, #0x18		@ big endian byte ordering
 		ldrb	r3, [r0, r3, lsr #3]
 		eors	r3, r3, #0xff		@ invert bits
-		bne	.found			@ any now set - found zero bit
+		bne	.L_found		@ any now set - found zero bit
 		add	r2, r2, #8		@ next bit pointer
 2:		cmp	r2, r1			@ any more?
 		blo	1b
@@ -109,7 +109,7 @@ ENTRY(_find_next_zero_bit_be)
 		ldrb	r3, [r0, r3, lsr #3]
 		eor	r3, r3, #0xff		@ now looking for a 1 bit
 		movs	r3, r3, lsr ip		@ shift off unused bits
-		bne	.found
+		bne	.L_found
 		orr	r2, r2, #7		@ if zero, then no bits here
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
@@ -121,7 +121,7 @@ ENTRY(_find_first_bit_be)
 1:		eor	r3, r2, #0x18		@ big endian byte ordering
 		ldrb	r3, [r0, r3, lsr #3]
 		movs	r3, r3
-		bne	.found			@ any now set - found zero bit
+		bne	.L_found		@ any now set - found zero bit
 		add	r2, r2, #8		@ next bit pointer
 2:		cmp	r2, r1			@ any more?
 		blo	1b
@@ -136,7 +136,7 @@ ENTRY(_find_next_bit_be)
 		eor	r3, r2, #0x18		@ big endian byte ordering
 		ldrb	r3, [r0, r3, lsr #3]
 		movs	r3, r3, lsr ip		@ shift off unused bits
-		bne	.found
+		bne	.L_found
 		orr	r2, r2, #7		@ if zero, then no bits here
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
@@ -146,7 +146,7 @@ ENTRY(_find_next_bit_be)
 /*
  * One or more bits in the LSB of r3 are assumed to be set.
  */
-.found:
+.L_found:
 #if __LINUX_ARM_ARCH__ >= 5
 		rsb	r1, r3, #0
 		and	r3, r3, r1
diff --git a/arch/arm/lib/gcclib.h b/arch/arm/lib/gcclib.h
deleted file mode 100644
index 8b6dcc656de7..000000000000
--- a/arch/arm/lib/gcclib.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* gcclib.h -- definitions for various functions 'borrowed' from gcc-2.95.3 */
-/* I Molton     29/07/01 */
-
-#include <linux/types.h>
-
-#define BITS_PER_UNIT	8
-#define SI_TYPE_SIZE	(sizeof(s32) * BITS_PER_UNIT)
-
-#ifdef __ARMEB__
-struct DIstruct {
-	s32 high, low;
-};
-#else
-struct DIstruct {
-	s32 low, high;
-};
-#endif
-
-typedef union {
-	struct DIstruct s;
-	s64 ll;
-} DIunion;
diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S
index d204018070a4..c03ea8e666ba 100644
--- a/arch/arm/lib/getuser.S
+++ b/arch/arm/lib/getuser.S
@@ -54,15 +54,6 @@ __get_user_4:
 	mov	r0, #0
 	mov	pc, lr
 
-	.global	__get_user_8
-__get_user_8:
-5:	ldrt	r2, [r0], #4
-6:	ldrt	r3, [r0]
-	mov	r0, #0
-	mov	pc, lr
-
-__get_user_bad_8:
-	mov	r3, #0
 __get_user_bad:
 	mov	r2, #0
 	mov	r0, #-EFAULT
@@ -73,6 +64,4 @@ __get_user_bad:
 	.long	2b, __get_user_bad
 	.long	3b, __get_user_bad
 	.long	4b, __get_user_bad
-	.long	5b, __get_user_bad_8
-	.long	6b, __get_user_bad_8
 .previous
diff --git a/arch/arm/lib/io-acorn.S b/arch/arm/lib/io-acorn.S
index 3aacd01d40e1..b153523631c3 100644
--- a/arch/arm/lib/io-acorn.S
+++ b/arch/arm/lib/io-acorn.S
@@ -17,7 +17,7 @@
 		.text
 		.align
 
-.iosl_warning:
+.Liosl_warning:
 		.ascii	"<4>insl/outsl not implemented, called from %08lX\0"
 		.align
 
@@ -27,6 +27,6 @@
  */
 ENTRY(insl)
 ENTRY(outsl)
-		adr	r0, .iosl_warning
+		adr	r0, .Liosl_warning
 		mov	r1, lr
 		b	printk
diff --git a/arch/arm/lib/io-readsb.S b/arch/arm/lib/io-readsb.S
index 081ef749298a..d3d8de71a2c8 100644
--- a/arch/arm/lib/io-readsb.S
+++ b/arch/arm/lib/io-readsb.S
@@ -10,7 +10,7 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 
-.insb_align:	rsb	ip, ip, #4
+.Linsb_align:	rsb	ip, ip, #4
 		cmp	ip, r2
 		movgt	ip, r2
 		cmp	ip, #2
@@ -21,20 +21,20 @@
 		ldrgtb	r3, [r0]
 		strgtb	r3, [r1], #1
 		subs	r2, r2, ip
-		bne	.insb_aligned
+		bne	.Linsb_aligned
 
 ENTRY(__raw_readsb)
 		teq	r2, #0		@ do we have to check for the zero len?
 		moveq	pc, lr
 		ands	ip, r1, #3
-		bne	.insb_align
+		bne	.Linsb_align
 
-.insb_aligned:	stmfd	sp!, {r4 - r6, lr}
+.Linsb_aligned:	stmfd	sp!, {r4 - r6, lr}
 
 		subs	r2, r2, #16
-		bmi	.insb_no_16
+		bmi	.Linsb_no_16
 
-.insb_16_lp:	ldrb	r3, [r0]
+.Linsb_16_lp:	ldrb	r3, [r0]
 		ldrb	r4, [r0]
 		ldrb	r5, [r0]
 		mov	r3, r3,     put_byte_0
@@ -69,13 +69,13 @@ ENTRY(__raw_readsb)
 		stmia	r1!, {r3 - r6}
 
 		subs	r2, r2, #16
-		bpl	.insb_16_lp
+		bpl	.Linsb_16_lp
 
 		tst	r2, #15
 		LOADREGS(eqfd, sp!, {r4 - r6, pc})
 
-.insb_no_16:	tst	r2, #8
-		beq	.insb_no_8
+.Linsb_no_16:	tst	r2, #8
+		beq	.Linsb_no_8
 
 		ldrb	r3, [r0]
 		ldrb	r4, [r0]
@@ -95,8 +95,8 @@ ENTRY(__raw_readsb)
 		orr	r4, r4, ip, put_byte_3
 		stmia	r1!, {r3, r4}
 
-.insb_no_8:	tst	r2, #4
-		beq	.insb_no_4
+.Linsb_no_8:	tst	r2, #4
+		beq	.Linsb_no_4
 
 		ldrb	r3, [r0]
 		ldrb	r4, [r0]
@@ -108,7 +108,7 @@ ENTRY(__raw_readsb)
 		orr	r3, r3, r6, put_byte_3
 		str	r3, [r1], #4
 
-.insb_no_4:	ands	r2, r2, #3
+.Linsb_no_4:	ands	r2, r2, #3
 		LOADREGS(eqfd, sp!, {r4 - r6, pc})
 
 		cmp	r2, #2
diff --git a/arch/arm/lib/io-readsw-armv3.S b/arch/arm/lib/io-readsw-armv3.S
index 476cf7f8a633..146d47c15455 100644
--- a/arch/arm/lib/io-readsw-armv3.S
+++ b/arch/arm/lib/io-readsw-armv3.S
@@ -11,16 +11,16 @@
 #include <asm/assembler.h>
 #include <asm/hardware.h>
 
-.insw_bad_alignment:
-		adr	r0, .insw_bad_align_msg
+.Linsw_bad_alignment:
+		adr	r0, .Linsw_bad_align_msg
 		mov	r2, lr
 		b	panic
-.insw_bad_align_msg:
+.Linsw_bad_align_msg:
 		.asciz	"insw: bad buffer alignment (0x%p, lr=0x%08lX)\n"
 		.align
 
-.insw_align:	tst	r1, #1
-		bne	.insw_bad_alignment
+.Linsw_align:	tst	r1, #1
+		bne	.Linsw_bad_alignment
 
 		ldr	r3, [r0]
 		strb	r3, [r1], #1
@@ -34,16 +34,16 @@ ENTRY(__raw_readsw)
 		teq	r2, #0		@ do we have to check for the zero len?
 		moveq	pc, lr
 		tst	r1, #3
-		bne	.insw_align
+		bne	.Linsw_align
 
-.insw_aligned:	mov	ip, #0xff
+.Linsw_aligned:	mov	ip, #0xff
 		orr	ip, ip, ip, lsl #8
 		stmfd	sp!, {r4, r5, r6, lr}
 
 		subs	r2, r2, #8
-		bmi	.no_insw_8
+		bmi	.Lno_insw_8
 
-.insw_8_lp:	ldr	r3, [r0]
+.Linsw_8_lp:	ldr	r3, [r0]
 		and	r3, r3, ip
 		ldr	r4, [r0]
 		orr	r3, r3, r4, lsl #16
@@ -66,13 +66,13 @@ ENTRY(__raw_readsw)
 		stmia	r1!, {r3 - r6}
 
 		subs	r2, r2, #8
-		bpl	.insw_8_lp
+		bpl	.Linsw_8_lp
 
 		tst	r2, #7
 		LOADREGS(eqfd, sp!, {r4, r5, r6, pc})
 
-.no_insw_8:	tst	r2, #4
-		beq	.no_insw_4
+.Lno_insw_8:	tst	r2, #4
+		beq	.Lno_insw_4
 
 		ldr	r3, [r0]
 		and	r3, r3, ip
@@ -86,8 +86,8 @@ ENTRY(__raw_readsw)
 
 		stmia	r1!, {r3, r4}
 
-.no_insw_4:	tst	r2, #2
-		beq	.no_insw_2
+.Lno_insw_4:	tst	r2, #2
+		beq	.Lno_insw_2
 
 		ldr	r3, [r0]
 		and	r3, r3, ip
@@ -96,7 +96,7 @@ ENTRY(__raw_readsw)
 
 		str	r3, [r1], #4
 
-.no_insw_2:	tst	r2, #1
+.Lno_insw_2:	tst	r2, #1
 		ldrne	r3, [r0]
 		strneb	r3, [r1], #1
 		movne	r3, r3, lsr #8
diff --git a/arch/arm/lib/io-readsw-armv4.S b/arch/arm/lib/io-readsw-armv4.S
index c92b66ecbe86..4db1c5f0b219 100644
--- a/arch/arm/lib/io-readsw-armv4.S
+++ b/arch/arm/lib/io-readsw-armv4.S
@@ -18,8 +18,8 @@
 #endif
 		.endm
 
-.insw_align:	movs	ip, r1, lsl #31
-		bne	.insw_noalign
+.Linsw_align:	movs	ip, r1, lsl #31
+		bne	.Linsw_noalign
 		ldrh	ip, [r0]
 		sub	r2, r2, #1
 		strh	ip, [r1], #2
@@ -28,14 +28,14 @@ ENTRY(__raw_readsw)
 		teq	r2, #0
 		moveq	pc, lr
 		tst	r1, #3
-		bne	.insw_align
+		bne	.Linsw_align
 
 		stmfd	sp!, {r4, r5, lr}
 
 		subs	r2, r2, #8
-		bmi	.no_insw_8
+		bmi	.Lno_insw_8
 
-.insw_8_lp:	ldrh	r3, [r0]
+.Linsw_8_lp:	ldrh	r3, [r0]
 		ldrh	r4, [r0]
 		pack	r3, r3, r4
 
@@ -53,10 +53,10 @@ ENTRY(__raw_readsw)
 
 		subs	r2, r2, #8
 		stmia	r1!, {r3 - r5, ip}
-		bpl	.insw_8_lp
+		bpl	.Linsw_8_lp
 
-.no_insw_8:	tst	r2, #4
-		beq	.no_insw_4
+.Lno_insw_8:	tst	r2, #4
+		beq	.Lno_insw_4
 
 		ldrh	r3, [r0]
 		ldrh	r4, [r0]
@@ -68,15 +68,15 @@ ENTRY(__raw_readsw)
 
 		stmia	r1!, {r3, r4}
 
-.no_insw_4:	movs	r2, r2, lsl #31
-		bcc	.no_insw_2
+.Lno_insw_4:	movs	r2, r2, lsl #31
+		bcc	.Lno_insw_2
 
 		ldrh	r3, [r0]
 		ldrh	ip, [r0]
 		pack	r3, r3, ip
 		str	r3, [r1], #4
 
-.no_insw_2:	ldrneh	r3, [r0]
+.Lno_insw_2:	ldrneh	r3, [r0]
 		strneh	r3, [r1]
 
 		ldmfd	sp!, {r4, r5, pc}
@@ -93,7 +93,7 @@ ENTRY(__raw_readsw)
 #define pull_hbyte1		lsr #8
 #endif
 
-.insw_noalign:	stmfd	sp!, {r4, lr}
+.Linsw_noalign:	stmfd	sp!, {r4, lr}
 		ldrccb	ip, [r1, #-1]!
 		bcc	1f
 
diff --git a/arch/arm/lib/io-writesb.S b/arch/arm/lib/io-writesb.S
index 70b2561bdb09..08209fc640ea 100644
--- a/arch/arm/lib/io-writesb.S
+++ b/arch/arm/lib/io-writesb.S
@@ -30,7 +30,7 @@
 #endif
 		.endm
 
-.outsb_align:	rsb	ip, ip, #4
+.Loutsb_align:	rsb	ip, ip, #4
 		cmp	ip, r2
 		movgt	ip, r2
 		cmp	ip, #2
@@ -41,44 +41,45 @@
 		ldrgtb	r3, [r1], #1
 		strgtb	r3, [r0]
 		subs	r2, r2, ip
-		bne	.outsb_aligned
+		bne	.Loutsb_aligned
 
 ENTRY(__raw_writesb)
 		teq	r2, #0		@ do we have to check for the zero len?
 		moveq	pc, lr
 		ands	ip, r1, #3
-		bne	.outsb_align
+		bne	.Loutsb_align
 
-.outsb_aligned:	stmfd	sp!, {r4, r5, lr}
+.Loutsb_aligned:
+		stmfd	sp!, {r4, r5, lr}
 
 		subs	r2, r2, #16
-		bmi	.outsb_no_16
+		bmi	.Loutsb_no_16
 
-.outsb_16_lp:	ldmia	r1!, {r3, r4, r5, ip}
+.Loutsb_16_lp:	ldmia	r1!, {r3, r4, r5, ip}
 		outword	r3
 		outword	r4
 		outword	r5
 		outword	ip
 		subs	r2, r2, #16
-		bpl	.outsb_16_lp
+		bpl	.Loutsb_16_lp
 
 		tst	r2, #15
 		LOADREGS(eqfd, sp!, {r4, r5, pc})
 
-.outsb_no_16:	tst	r2, #8
-		beq	.outsb_no_8
+.Loutsb_no_16:	tst	r2, #8
+		beq	.Loutsb_no_8
 
 		ldmia	r1!, {r3, r4}
 		outword	r3
 		outword	r4
 
-.outsb_no_8:	tst	r2, #4
-		beq	.outsb_no_4
+.Loutsb_no_8:	tst	r2, #4
+		beq	.Loutsb_no_4
 
 		ldr	r3, [r1], #4
 		outword	r3
 
-.outsb_no_4:	ands	r2, r2, #3
+.Loutsb_no_4:	ands	r2, r2, #3
 		LOADREGS(eqfd, sp!, {r4, r5, pc})
 
 		cmp	r2, #2
diff --git a/arch/arm/lib/io-writesw-armv3.S b/arch/arm/lib/io-writesw-armv3.S
index 950e7e310f1a..52d62b481295 100644
--- a/arch/arm/lib/io-writesw-armv3.S
+++ b/arch/arm/lib/io-writesw-armv3.S
@@ -11,16 +11,16 @@
 #include <asm/assembler.h>
 #include <asm/hardware.h>
 
-.outsw_bad_alignment:
-		adr	r0, .outsw_bad_align_msg
+.Loutsw_bad_alignment:
+		adr	r0, .Loutsw_bad_align_msg
 		mov	r2, lr
 		b	panic
-.outsw_bad_align_msg:
+.Loutsw_bad_align_msg:
 		.asciz	"outsw: bad buffer alignment (0x%p, lr=0x%08lX)\n"
 		.align
 
-.outsw_align:	tst	r1, #1
-		bne	.outsw_bad_alignment
+.Loutsw_align:	tst	r1, #1
+		bne	.Loutsw_bad_alignment
 
 		add	r1, r1, #2
 
@@ -35,14 +35,14 @@ ENTRY(__raw_writesw)
 		teq	r2, #0		@ do we have to check for the zero len?
 		moveq	pc, lr
 		tst	r1, #3
-		bne	.outsw_align
+		bne	.Loutsw_align
 
-.outsw_aligned:	stmfd	sp!, {r4, r5, r6, lr}
+		stmfd	sp!, {r4, r5, r6, lr}
 
 		subs	r2, r2, #8
-		bmi	.no_outsw_8
+		bmi	.Lno_outsw_8
 
-.outsw_8_lp:	ldmia	r1!, {r3, r4, r5, r6}
+.Loutsw_8_lp:	ldmia	r1!, {r3, r4, r5, r6}
 
 		mov	ip, r3, lsl #16
 		orr	ip, ip, ip, lsr #16
@@ -77,13 +77,13 @@ ENTRY(__raw_writesw)
 		str	ip, [r0]
 
 		subs	r2, r2, #8
-		bpl	.outsw_8_lp
+		bpl	.Loutsw_8_lp
 
 		tst	r2, #7
 		LOADREGS(eqfd, sp!, {r4, r5, r6, pc})
 
-.no_outsw_8:	tst	r2, #4
-		beq	.no_outsw_4
+.Lno_outsw_8:	tst	r2, #4
+		beq	.Lno_outsw_4
 
 		ldmia	r1!, {r3, r4}
 
@@ -103,8 +103,8 @@ ENTRY(__raw_writesw)
 		orr	ip, ip, ip, lsl #16
 		str	ip, [r0]
 
-.no_outsw_4:	tst	r2, #2
-		beq	.no_outsw_2
+.Lno_outsw_4:	tst	r2, #2
+		beq	.Lno_outsw_2
 
 		ldr	r3, [r1], #4
 
@@ -116,7 +116,7 @@ ENTRY(__raw_writesw)
 		orr	ip, ip, ip, lsl #16
 		str	ip, [r0]
 
-.no_outsw_2:	tst	r2, #1
+.Lno_outsw_2:	tst	r2, #1
 
 		ldrne	r3, [r1]
 
diff --git a/arch/arm/lib/io-writesw-armv4.S b/arch/arm/lib/io-writesw-armv4.S
index 5e240e452af6..c8e85bd653b7 100644
--- a/arch/arm/lib/io-writesw-armv4.S
+++ b/arch/arm/lib/io-writesw-armv4.S
@@ -22,8 +22,8 @@
 #endif
 		.endm
 
-.outsw_align:	movs	ip, r1, lsl #31
-		bne	.outsw_noalign
+.Loutsw_align:	movs	ip, r1, lsl #31
+		bne	.Loutsw_noalign
 
 		ldrh	r3, [r1], #2
 		sub	r2, r2, #1
@@ -33,35 +33,35 @@ ENTRY(__raw_writesw)
 		teq	r2, #0
 		moveq	pc, lr
 		ands	r3, r1, #3
-		bne	.outsw_align
+		bne	.Loutsw_align
 
 		stmfd	sp!, {r4, r5, lr}
 
 		subs	r2, r2, #8
-		bmi	.no_outsw_8
+		bmi	.Lno_outsw_8
 
-.outsw_8_lp:	ldmia	r1!, {r3, r4, r5, ip}
+.Loutsw_8_lp:	ldmia	r1!, {r3, r4, r5, ip}
 		subs	r2, r2, #8
 		outword	r3
 		outword	r4
 		outword	r5
 		outword	ip
-		bpl	.outsw_8_lp
+		bpl	.Loutsw_8_lp
 
-.no_outsw_8:	tst	r2, #4
-		beq	.no_outsw_4
+.Lno_outsw_8:	tst	r2, #4
+		beq	.Lno_outsw_4
 
 		ldmia	r1!, {r3, ip}
 		outword	r3
 		outword	ip
 
-.no_outsw_4:	movs	r2, r2, lsl #31
-		bcc	.no_outsw_2
+.Lno_outsw_4:	movs	r2, r2, lsl #31
+		bcc	.Lno_outsw_2
 
 		ldr	r3, [r1], #4
 		outword	r3
 
-.no_outsw_2:	ldrneh	r3, [r1]
+.Lno_outsw_2:	ldrneh	r3, [r1]
 		strneh	r3, [r0]
 
 		ldmfd	sp!, {r4, r5, pc}
@@ -74,7 +74,8 @@ ENTRY(__raw_writesw)
 #define push_hbyte1	lsl #8
 #endif
 
-.outsw_noalign:	ldr	r3, [r1, -r3]!
+.Loutsw_noalign:
+		ldr	r3, [r1, -r3]!
 		subcs	r2, r2, #1
 		bcs	2f
 		subs	r2, r2, #2
diff --git a/arch/arm/lib/lshrdi3.S b/arch/arm/lib/lshrdi3.S
new file mode 100644
index 000000000000..46c2ed19ec95
--- /dev/null
+++ b/arch/arm/lib/lshrdi3.S
@@ -0,0 +1,48 @@
+/* Copyright 1995, 1996, 1998, 1999, 2000, 2003, 2004, 2005
+   Free Software Foundation, Inc.
+
+This file is free software; you can redistribute it and/or modify it
+under the terms of the GNU General Public License as published by the
+Free Software Foundation; either version 2, or (at your option) any
+later version.
+
+In addition to the permissions in the GNU General Public License, the
+Free Software Foundation gives you unlimited permission to link the
+compiled version of this file into combinations with other programs,
+and to distribute those combinations without any restriction coming
+from the use of this file.  (The General Public License restrictions
+do apply in other respects; for example, they cover modification of
+the file, and distribution when not linked into a combine
+executable.)
+
+This file is distributed in the hope that it will be useful, but
+WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; see the file COPYING.  If not, write to
+the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+Boston, MA 02110-1301, USA.  */
+
+
+#include <linux/linkage.h>
+
+#ifdef __ARMEB__
+#define al r1
+#define ah r0
+#else
+#define al r0
+#define ah r1
+#endif
+
+ENTRY(__lshrdi3)
+
+	subs	r3, r2, #32
+	rsb	ip, r2, #32
+	movmi	al, al, lsr r2
+	movpl	al, ah, lsr r3
+	orrmi	al, al, ah, lsl ip
+	mov	ah, ah, lsr r2
+	mov	pc, lr
+
diff --git a/arch/arm/lib/lshrdi3.c b/arch/arm/lib/lshrdi3.c
deleted file mode 100644
index 3681f49d2b6e..000000000000
--- a/arch/arm/lib/lshrdi3.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/* More subroutines needed by GCC output code on some machines.  */
-/* Compile this one with gcc.  */
-/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-/* As a special exception, if you link this library with other files,
-   some of which are compiled with GCC, to produce an executable,
-   this library does not by itself cause the resulting executable
-   to be covered by the GNU General Public License.
-   This exception does not however invalidate any other reasons why
-   the executable file might be covered by the GNU General Public License.
- */
-/* support functions required by the kernel. based on code from gcc-2.95.3 */
-/* I Molton     29/07/01 */
-
-#include "gcclib.h"
-
-s64 __lshrdi3(s64 u, int b)
-{
-	DIunion w;
-	int bm;
-	DIunion uu;
-
-	if (b == 0)
-		return u;
-
-	uu.ll = u;
-
-	bm = (sizeof(s32) * BITS_PER_UNIT) - b;
-	if (bm <= 0) {
-		w.s.high = 0;
-		w.s.low = (u32) uu.s.high >> -bm;
-	} else {
-		u32 carries = (u32) uu.s.high << bm;
-		w.s.high = (u32) uu.s.high >> b;
-		w.s.low = ((u32) uu.s.low >> b) | carries;
-	}
-
-	return w.ll;
-}
diff --git a/arch/arm/lib/memcpy.S b/arch/arm/lib/memcpy.S
index f5a593ceb8cc..7e71d6708a8d 100644
--- a/arch/arm/lib/memcpy.S
+++ b/arch/arm/lib/memcpy.S
@@ -1,393 +1,59 @@
 /*
  *  linux/arch/arm/lib/memcpy.S
  *
- *  Copyright (C) 1995-1999 Russell King
+ *  Author:	Nicolas Pitre
+ *  Created:	Sep 28, 2005
+ *  Copyright:	MontaVista Software, Inc.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  ASM optimised string functions
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
  */
+
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 
-		.text
-
-#define ENTER	\
-		mov	ip,sp	;\
-		stmfd	sp!,{r0,r4-r9,fp,ip,lr,pc}	;\
-		sub	fp,ip,#4
-
-#define EXIT	\
-		LOADREGS(ea, fp, {r0, r4 - r9, fp, sp, pc})
-
-#define EXITEQ	\
-		LOADREGS(eqea, fp, {r0, r4 - r9, fp, sp, pc})
-
-/*
- * Prototype: void memcpy(void *to,const void *from,unsigned long n);
- */
-ENTRY(memcpy)
-ENTRY(memmove)
-		ENTER
-		cmp	r1, r0
-		bcc	23f
-		subs	r2, r2, #4
-		blt	6f
-	PLD(	pld	[r1, #0]		)
-		ands	ip, r0, #3
-		bne	7f
-		ands	ip, r1, #3
-		bne	8f
+	.macro ldr1w ptr reg abort
+	ldr \reg, [\ptr], #4
+	.endm
 
-1:		subs	r2, r2, #8
-		blt	5f
-		subs	r2, r2, #20
-		blt	4f
-	PLD(	pld	[r1, #28]		)
-	PLD(	subs	r2, r2, #64		)
-	PLD(	blt	3f			)
-2:	PLD(	pld	[r1, #60]		)
-	PLD(	pld	[r1, #92]		)
-		ldmia	r1!, {r3 - r9, ip}
-		subs	r2, r2, #32
-		stmgeia	r0!, {r3 - r9, ip}
-		ldmgeia	r1!, {r3 - r9, ip}
-		subges	r2, r2, #32
-		stmia	r0!, {r3 - r9, ip}
-		bge	2b
-3:	PLD(	ldmia	r1!, {r3 - r9, ip}	)
-	PLD(	adds	r2, r2, #32		)
-	PLD(	stmgeia	r0!, {r3 - r9, ip}	)
-	PLD(	ldmgeia	r1!, {r3 - r9, ip}	)
-	PLD(	subges	r2, r2, #32		)
-	PLD(	stmia	r0!, {r3 - r9, ip}	)
-4:		cmn	r2, #16
-		ldmgeia	r1!, {r3 - r6}
-		subge	r2, r2, #16
-		stmgeia	r0!, {r3 - r6}
-		adds	r2, r2, #20
-		ldmgeia	r1!, {r3 - r5}
-		subge	r2, r2, #12
-		stmgeia	r0!, {r3 - r5}
-5:		adds	r2, r2, #8
-		blt	6f
-		subs	r2, r2, #4
-		ldrlt	r3, [r1], #4
-		ldmgeia	r1!, {r4, r5}
-		subge	r2, r2, #4
-		strlt	r3, [r0], #4
-		stmgeia	r0!, {r4, r5}
+	.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
+	ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4}
+	.endm
 
-6:		adds	r2, r2, #4
-		EXITEQ
-		cmp	r2, #2
-		ldrb	r3, [r1], #1
-		ldrgeb	r4, [r1], #1
-		ldrgtb	r5, [r1], #1
-		strb	r3, [r0], #1
-		strgeb	r4, [r0], #1
-		strgtb	r5, [r0], #1
-		EXIT
+	.macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
+	ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8}
+	.endm
 
-7:		rsb	ip, ip, #4
-		cmp	ip, #2
-		ldrb	r3, [r1], #1
-		ldrgeb	r4, [r1], #1
-		ldrgtb	r5, [r1], #1
-		strb	r3, [r0], #1
-		strgeb	r4, [r0], #1
-		strgtb	r5, [r0], #1
-		subs	r2, r2, ip
-		blt	6b
-		ands	ip, r1, #3
-		beq	1b
+	.macro ldr1b ptr reg cond=al abort
+	ldr\cond\()b \reg, [\ptr], #1
+	.endm
 
-8:		bic	r1, r1, #3
-		ldr	r7, [r1], #4
-		cmp	ip, #2
-		bgt	18f
-		beq	13f
-		cmp	r2, #12
-		blt	11f
-	PLD(	pld	[r1, #12]		)
-		sub	r2, r2, #12
-	PLD(	subs	r2, r2, #32		)
-	PLD(	blt	10f			)
-	PLD(	pld	[r1, #28]		)
-9:	PLD(	pld	[r1, #44]		)
-10:		mov	r3, r7, pull #8
-		ldmia	r1!, {r4 - r7}
-		subs	r2, r2, #16
-		orr	r3, r3, r4, push #24
-		mov	r4, r4, pull #8
-		orr	r4, r4, r5, push #24
-		mov	r5, r5, pull #8
-		orr	r5, r5, r6, push #24
-		mov	r6, r6, pull #8
-		orr	r6, r6, r7, push #24
-		stmia	r0!, {r3 - r6}
-		bge	9b
-	PLD(	cmn	r2, #32			)
-	PLD(	bge	10b			)
-	PLD(	add	r2, r2, #32		)
-		adds	r2, r2, #12
-		blt	12f
-11:		mov	r3, r7, pull #8
-		ldr	r7, [r1], #4
-		subs	r2, r2, #4
-		orr	r3, r3, r7, push #24
-		str	r3, [r0], #4
-		bge	11b
-12:		sub	r1, r1, #3
-		b	6b
+	.macro str1w ptr reg abort
+	str \reg, [\ptr], #4
+	.endm
 
-13:		cmp	r2, #12
-		blt	16f
-	PLD(	pld	[r1, #12]		)
-		sub	r2, r2, #12
-	PLD(	subs	r2, r2, #32		)
-	PLD(	blt	15f			)
-	PLD(	pld	[r1, #28]		)
-14:	PLD(	pld	[r1, #44]		)
-15:		mov	r3, r7, pull #16
-		ldmia	r1!, {r4 - r7}
-		subs	r2, r2, #16
-		orr	r3, r3, r4, push #16
-		mov	r4, r4, pull #16
-		orr	r4, r4, r5, push #16
-		mov	r5, r5, pull #16
-		orr	r5, r5, r6, push #16
-		mov	r6, r6, pull #16
-		orr	r6, r6, r7, push #16
-		stmia	r0!, {r3 - r6}
-		bge	14b
-	PLD(	cmn	r2, #32			)
-	PLD(	bge	15b			)
-	PLD(	add	r2, r2, #32		)
-		adds	r2, r2, #12
-		blt	17f
-16:		mov	r3, r7, pull #16
-		ldr	r7, [r1], #4
-		subs	r2, r2, #4
-		orr	r3, r3, r7, push #16
-		str	r3, [r0], #4
-		bge	16b
-17:		sub	r1, r1, #2
-		b	6b
+	.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
+	stmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8}
+	.endm
 
-18:		cmp	r2, #12
-		blt	21f
-	PLD(	pld	[r1, #12]		)
-		sub	r2, r2, #12
-	PLD(	subs	r2, r2, #32		)
-	PLD(	blt	20f			)
-	PLD(	pld	[r1, #28]		)
-19:	PLD(	pld	[r1, #44]		)
-20:		mov	r3, r7, pull #24
-		ldmia	r1!, {r4 - r7}
-		subs	r2, r2, #16
-		orr	r3, r3, r4, push #8
-		mov	r4, r4, pull #24
-		orr	r4, r4, r5, push #8
-		mov	r5, r5, pull #24
-		orr	r5, r5, r6, push #8
-		mov	r6, r6, pull #24
-		orr	r6, r6, r7, push #8
-		stmia	r0!, {r3 - r6}
-		bge	19b
-	PLD(	cmn	r2, #32			)
-	PLD(	bge	20b			)
-	PLD(	add	r2, r2, #32		)
-		adds	r2, r2, #12
-		blt	22f
-21:		mov	r3, r7, pull #24
-		ldr	r7, [r1], #4
-		subs	r2, r2, #4
-		orr	r3, r3, r7, push #8
-		str	r3, [r0], #4
-		bge	21b
-22:		sub	r1, r1, #1
-		b	6b
+	.macro str1b ptr reg cond=al abort
+	str\cond\()b \reg, [\ptr], #1
+	.endm
 
+	.macro enter reg1 reg2
+	stmdb sp!, {r0, \reg1, \reg2}
+	.endm
 
-23:		add	r1, r1, r2
-		add	r0, r0, r2
-		subs	r2, r2, #4
-		blt	29f
-	PLD(	pld	[r1, #-4]		)
-		ands	ip, r0, #3
-		bne	30f
-		ands	ip, r1, #3
-		bne	31f
+	.macro exit reg1 reg2
+	ldmfd sp!, {r0, \reg1, \reg2}
+	.endm
 
-24:		subs	r2, r2, #8
-		blt	28f
-		subs	r2, r2, #20
-		blt	27f
-	PLD(	pld	[r1, #-32]		)
-	PLD(	subs	r2, r2, #64		)
-	PLD(	blt	26f			)
-25:	PLD(	pld	[r1, #-64]		)
-	PLD(	pld	[r1, #-96]		)
-		ldmdb	r1!, {r3 - r9, ip}
-		subs	r2, r2, #32
-		stmgedb	r0!, {r3 - r9, ip}
-		ldmgedb	r1!, {r3 - r9, ip}
-		subges	r2, r2, #32
-		stmdb	r0!, {r3 - r9, ip}
-		bge	25b
-26:	PLD(	ldmdb	r1!, {r3 - r9, ip}	)
-	PLD(	adds	r2, r2, #32		)
-	PLD(	stmgedb	r0!, {r3 - r9, ip}	)
-	PLD(	ldmgedb	r1!, {r3 - r9, ip}	)
-	PLD(	subges	r2, r2, #32		)
-	PLD(	stmdb	r0!, {r3 - r9, ip}	)
-27:		cmn	r2, #16
-		ldmgedb	r1!, {r3 - r6}
-		subge	r2, r2, #16
-		stmgedb	r0!, {r3 - r6}
-		adds	r2, r2, #20
-		ldmgedb	r1!, {r3 - r5}
-		subge	r2, r2, #12
-		stmgedb	r0!, {r3 - r5}
-28:		adds	r2, r2, #8
-		blt	29f
-		subs	r2, r2, #4
-		ldrlt	r3, [r1, #-4]!
-		ldmgedb	r1!, {r4, r5}
-		subge	r2, r2, #4
-		strlt	r3, [r0, #-4]!
-		stmgedb	r0!, {r4, r5}
+	.text
 
-29:		adds	r2, r2, #4
-		EXITEQ
-		cmp	r2, #2
-		ldrb	r3, [r1, #-1]!
-		ldrgeb	r4, [r1, #-1]!
-		ldrgtb	r5, [r1, #-1]!
-		strb	r3, [r0, #-1]!
-		strgeb	r4, [r0, #-1]!
-		strgtb	r5, [r0, #-1]!
-		EXIT
+/* Prototype: void *memcpy(void *dest, const void *src, size_t n); */
 
-30:		cmp	ip, #2
-		ldrb	r3, [r1, #-1]!
-		ldrgeb	r4, [r1, #-1]!
-		ldrgtb	r5, [r1, #-1]!
-		strb	r3, [r0, #-1]!
-		strgeb	r4, [r0, #-1]!
-		strgtb	r5, [r0, #-1]!
-		subs	r2, r2, ip
-		blt	29b
-		ands	ip, r1, #3
-		beq	24b
-
-31:		bic	r1, r1, #3
-		ldr	r3, [r1], #0
-		cmp	ip, #2
-		blt	41f
-		beq	36f
-		cmp	r2, #12
-		blt	34f
-	PLD(	pld	[r1, #-16]		)
-		sub	r2, r2, #12
-	PLD(	subs	r2, r2, #32		)
-	PLD(	blt	33f			)
-	PLD(	pld	[r1, #-32]		)
-32:	PLD(	pld	[r1, #-48]		)
-33:		mov	r7, r3, push #8
-		ldmdb	r1!, {r3, r4, r5, r6}
-		subs	r2, r2, #16
-		orr	r7, r7, r6, pull #24
-		mov	r6, r6, push #8
-		orr	r6, r6, r5, pull #24
-		mov	r5, r5, push #8
-		orr	r5, r5, r4, pull #24
-		mov	r4, r4, push #8
-		orr	r4, r4, r3, pull #24
-		stmdb	r0!, {r4, r5, r6, r7}
-		bge	32b
-	PLD(	cmn	r2, #32			)
-	PLD(	bge	33b			)
-	PLD(	add	r2, r2, #32		)
-		adds	r2, r2, #12
-		blt	35f
-34:		mov	ip, r3, push #8
-		ldr	r3, [r1, #-4]!
-		subs	r2, r2, #4
-		orr	ip, ip, r3, pull #24
-		str	ip, [r0, #-4]!
-		bge	34b
-35:		add	r1, r1, #3
-		b	29b
-
-36:		cmp	r2, #12
-		blt	39f
-	PLD(	pld	[r1, #-16]		)
-		sub	r2, r2, #12
-	PLD(	subs	r2, r2, #32		)
-	PLD(	blt	38f			)
-	PLD(	pld	[r1, #-32]		)
-37:	PLD(	pld	[r1, #-48]		)
-38:		mov	r7, r3, push #16
-		ldmdb	r1!, {r3, r4, r5, r6}
-		subs	r2, r2, #16
-		orr	r7, r7, r6, pull #16
-		mov	r6, r6, push #16
-		orr	r6, r6, r5, pull #16
-		mov	r5, r5, push #16
-		orr	r5, r5, r4, pull #16
-		mov	r4, r4, push #16
-		orr	r4, r4, r3, pull #16
-		stmdb	r0!, {r4, r5, r6, r7}
-		bge	37b
-	PLD(	cmn	r2, #32			)
-	PLD(	bge	38b			)
-	PLD(	add	r2, r2, #32		)
-		adds	r2, r2, #12
-		blt	40f
-39:		mov	ip, r3, push #16
-		ldr	r3, [r1, #-4]!
-		subs	r2, r2, #4
-		orr	ip, ip, r3, pull #16
-		str	ip, [r0, #-4]!
-		bge	39b
-40:		add	r1, r1, #2
-		b	29b
+ENTRY(memcpy)
 
-41:		cmp	r2, #12
-		blt	44f
-	PLD(	pld	[r1, #-16]		)
-		sub	r2, r2, #12
-	PLD(	subs	r2, r2, #32		)
-	PLD(	blt	43f			)
-	PLD(	pld	[r1, #-32]		)
-42:	PLD(	pld	[r1, #-48]		)
-43:		mov	r7, r3, push #24
-		ldmdb	r1!, {r3, r4, r5, r6}
-		subs	r2, r2, #16
-		orr	r7, r7, r6, pull #8
-		mov	r6, r6, push #24
-		orr	r6, r6, r5, pull #8
-		mov	r5, r5, push #24
-		orr	r5, r5, r4, pull #8
-		mov	r4, r4, push #24
-		orr	r4, r4, r3, pull #8
-		stmdb	r0!, {r4, r5, r6, r7}
-		bge	42b
-	PLD(	cmn	r2, #32			)
-	PLD(	bge	43b			)
-	PLD(	add	r2, r2, #32		)
-		adds	r2, r2, #12
-		blt	45f
-44:		mov	ip, r3, push #24
-		ldr	r3, [r1, #-4]!
-		subs	r2, r2, #4
-		orr	ip, ip, r3, pull #8
-		str	ip, [r0, #-4]!
-		bge	44b
-45:		add	r1, r1, #1
-		b	29b
+#include "copy_template.S"
 
diff --git a/arch/arm/lib/memmove.S b/arch/arm/lib/memmove.S
new file mode 100644
index 000000000000..ef7fddc14ac9
--- /dev/null
+++ b/arch/arm/lib/memmove.S
@@ -0,0 +1,206 @@
+/*
+ *  linux/arch/arm/lib/memmove.S
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Sep 28, 2005
+ *  Copyright:	(C) MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * This can be used to enable code to cacheline align the source pointer.
+ * Experiments on tested architectures (StrongARM and XScale) didn't show
+ * this a worthwhile thing to do.  That might be different in the future.
+ */
+//#define CALGN(code...)        code
+#define CALGN(code...)
+
+		.text
+
+/*
+ * Prototype: void *memmove(void *dest, const void *src, size_t n);
+ *
+ * Note:
+ *
+ * If the memory regions don't overlap, we simply branch to memcpy which is
+ * normally a bit faster. Otherwise the copy is done going downwards.  This
+ * is a transposition of the code from copy_template.S but with the copy
+ * occurring in the opposite direction.
+ */
+
+ENTRY(memmove)
+
+		subs	ip, r0, r1
+		cmphi	r2, ip
+		bls	memcpy
+
+		stmfd	sp!, {r0, r4, lr}
+		add	r1, r1, r2
+		add	r0, r0, r2
+		subs	r2, r2, #4
+		blt	8f
+		ands	ip, r0, #3
+	PLD(	pld	[r1, #-4]		)
+		bne	9f
+		ands	ip, r1, #3
+		bne	10f
+
+1:		subs	r2, r2, #(28)
+		stmfd	sp!, {r5 - r8}
+		blt	5f
+
+	CALGN(	ands	ip, r1, #31		)
+	CALGN(	sbcnes	r4, ip, r2		)  @ C is always set here
+	CALGN(	bcs	2f			)
+	CALGN(	adr	r4, 6f			)
+	CALGN(	subs	r2, r2, ip		)  @ C is set here
+	CALGN(	add	pc, r4, ip		)
+
+	PLD(	pld	[r1, #-4]		)
+2:	PLD(	subs	r2, r2, #96		)
+	PLD(	pld	[r1, #-32]		)
+	PLD(	blt	4f			)
+	PLD(	pld	[r1, #-64]		)
+	PLD(	pld	[r1, #-96]		)
+
+3:	PLD(	pld	[r1, #-128]		)
+4:		ldmdb	r1!, {r3, r4, r5, r6, r7, r8, ip, lr}
+		subs	r2, r2, #32
+		stmdb	r0!, {r3, r4, r5, r6, r7, r8, ip, lr}
+		bge	3b
+	PLD(	cmn	r2, #96			)
+	PLD(	bge	4b			)
+
+5:		ands	ip, r2, #28
+		rsb	ip, ip, #32
+		addne	pc, pc, ip		@ C is always clear here
+		b	7f
+6:		nop
+		ldr	r3, [r1, #-4]!
+		ldr	r4, [r1, #-4]!
+		ldr	r5, [r1, #-4]!
+		ldr	r6, [r1, #-4]!
+		ldr	r7, [r1, #-4]!
+		ldr	r8, [r1, #-4]!
+		ldr	lr, [r1, #-4]!
+
+		add	pc, pc, ip
+		nop
+		nop
+		str	r3, [r0, #-4]!
+		str	r4, [r0, #-4]!
+		str	r5, [r0, #-4]!
+		str	r6, [r0, #-4]!
+		str	r7, [r0, #-4]!
+		str	r8, [r0, #-4]!
+		str	lr, [r0, #-4]!
+
+	CALGN(	bcs	2b			)
+
+7:		ldmfd	sp!, {r5 - r8}
+
+8:		movs	r2, r2, lsl #31
+		ldrneb	r3, [r1, #-1]!
+		ldrcsb	r4, [r1, #-1]!
+		ldrcsb	ip, [r1, #-1]
+		strneb	r3, [r0, #-1]!
+		strcsb	r4, [r0, #-1]!
+		strcsb	ip, [r0, #-1]
+		ldmfd	sp!, {r0, r4, pc}
+
+9:		cmp	ip, #2
+		ldrgtb	r3, [r1, #-1]!
+		ldrgeb	r4, [r1, #-1]!
+		ldrb	lr, [r1, #-1]!
+		strgtb	r3, [r0, #-1]!
+		strgeb	r4, [r0, #-1]!
+		subs	r2, r2, ip
+		strb	lr, [r0, #-1]!
+		blt	8b
+		ands	ip, r1, #3
+		beq	1b
+
+10:		bic	r1, r1, #3
+		cmp	ip, #2
+		ldr	r3, [r1, #0]
+		beq	17f
+		blt	18f
+
+
+		.macro	backward_copy_shift push pull
+
+		subs	r2, r2, #28
+		blt	14f
+
+	CALGN(	ands	ip, r1, #31		)
+	CALGN(	rsb	ip, ip, #32		)
+	CALGN(	sbcnes	r4, ip, r2		)  @ C is always set here
+	CALGN(	subcc	r2, r2, ip		)
+	CALGN(	bcc	15f			)
+
+11:		stmfd	sp!, {r5 - r9}
+
+	PLD(	pld	[r1, #-4]		)
+	PLD(	subs	r2, r2, #96		)
+	PLD(	pld	[r1, #-32]		)
+	PLD(	blt	13f			)
+	PLD(	pld	[r1, #-64]		)
+	PLD(	pld	[r1, #-96]		)
+
+12:	PLD(	pld	[r1, #-128]		)
+13:		ldmdb   r1!, {r7, r8, r9, ip}
+		mov     lr, r3, push #\push
+		subs    r2, r2, #32
+		ldmdb   r1!, {r3, r4, r5, r6}
+		orr     lr, lr, ip, pull #\pull
+		mov     ip, ip, push #\push
+		orr     ip, ip, r9, pull #\pull
+		mov     r9, r9, push #\push
+		orr     r9, r9, r8, pull #\pull
+		mov     r8, r8, push #\push
+		orr     r8, r8, r7, pull #\pull
+		mov     r7, r7, push #\push
+		orr     r7, r7, r6, pull #\pull
+		mov     r6, r6, push #\push
+		orr     r6, r6, r5, pull #\pull
+		mov     r5, r5, push #\push
+		orr     r5, r5, r4, pull #\pull
+		mov     r4, r4, push #\push
+		orr     r4, r4, r3, pull #\pull
+		stmdb   r0!, {r4 - r9, ip, lr}
+		bge	12b
+	PLD(	cmn	r2, #96			)
+	PLD(	bge	13b			)
+
+		ldmfd	sp!, {r5 - r9}
+
+14:		ands	ip, r2, #28
+		beq	16f
+
+15:		mov     lr, r3, push #\push
+		ldr	r3, [r1, #-4]!
+		subs	ip, ip, #4
+		orr	lr, lr, r3, pull #\pull
+		str	lr, [r0, #-4]!
+		bgt	15b
+	CALGN(	cmp	r2, #0			)
+	CALGN(	bge	11b			)
+
+16:		add	r1, r1, #(\pull / 8)
+		b	8b
+
+		.endm
+
+
+		backward_copy_shift	push=8	pull=24
+
+17:		backward_copy_shift	push=16	pull=16
+
+18:		backward_copy_shift	push=24	pull=8
+
diff --git a/arch/arm/lib/muldi3.S b/arch/arm/lib/muldi3.S
new file mode 100644
index 000000000000..c7fbdf005319
--- /dev/null
+++ b/arch/arm/lib/muldi3.S
@@ -0,0 +1,44 @@
+/*
+ *  linux/arch/arm/lib/muldi3.S
+ *
+ *  Author:     Nicolas Pitre
+ *  Created:    Oct 19, 2005
+ *  Copyright:  Monta Vista Software, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+
+#ifdef __ARMEB__
+#define xh r0
+#define xl r1
+#define yh r2
+#define yl r3
+#else
+#define xl r0
+#define xh r1
+#define yl r2
+#define yh r3
+#endif
+
+ENTRY(__muldi3)
+
+	mul	xh, yl, xh
+	mla	xh, xl, yh, xh
+	mov	ip, xl, asr #16
+	mov	yh, yl, asr #16
+	bic	xl, xl, ip, lsl #16
+	bic	yl, yl, yh, lsl #16
+	mla	xh, yh, ip, xh
+	mul	yh, xl, yh
+	mul	xl, yl, xl
+	mul	ip, yl, ip
+	adds	xl, xl, yh, lsl #16
+	adc	xh, xh, yh, lsr #16
+	adds	xl, xl, ip, lsl #16
+	adc	xh, xh, ip, lsr #16
+	mov	pc, lr
+
diff --git a/arch/arm/lib/muldi3.c b/arch/arm/lib/muldi3.c
deleted file mode 100644
index 0a3b93313f18..000000000000
--- a/arch/arm/lib/muldi3.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/* More subroutines needed by GCC output code on some machines.  */
-/* Compile this one with gcc.  */
-/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-/* As a special exception, if you link this library with other files,
-   some of which are compiled with GCC, to produce an executable,
-   this library does not by itself cause the resulting executable
-   to be covered by the GNU General Public License.
-   This exception does not however invalidate any other reasons why
-   the executable file might be covered by the GNU General Public License.
- */
-/* support functions required by the kernel. based on code from gcc-2.95.3 */
-/* I Molton     29/07/01 */
-
-#include "gcclib.h"
-
-#define umul_ppmm(xh, xl, a, b) \
-{register u32 __t0, __t1, __t2;                                     \
-  __asm__ ("%@ Inlined umul_ppmm					\n\
-        mov     %2, %5, lsr #16						\n\
-        mov     %0, %6, lsr #16						\n\
-        bic     %3, %5, %2, lsl #16					\n\
-        bic     %4, %6, %0, lsl #16					\n\
-        mul     %1, %3, %4						\n\
-        mul     %4, %2, %4						\n\
-        mul     %3, %0, %3						\n\
-        mul     %0, %2, %0						\n\
-        adds    %3, %4, %3						\n\
-        addcs   %0, %0, #65536						\n\
-        adds    %1, %1, %3, lsl #16					\n\
-        adc     %0, %0, %3, lsr #16"                                    \
-           : "=&r" ((u32) (xh)),                                    \
-             "=r" ((u32) (xl)),                                     \
-             "=&r" (__t0), "=&r" (__t1), "=r" (__t2)                    \
-           : "r" ((u32) (a)),                                       \
-             "r" ((u32) (b)));}
-
-#define __umulsidi3(u, v) \
-  ({DIunion __w;                                                        \
-    umul_ppmm (__w.s.high, __w.s.low, u, v);                            \
-    __w.ll; })
-
-s64 __muldi3(s64 u, s64 v)
-{
-	DIunion w;
-	DIunion uu, vv;
-
-	uu.ll = u, vv.ll = v;
-
-	w.ll = __umulsidi3(uu.s.low, vv.s.low);
-	w.s.high += ((u32) uu.s.low * (u32) vv.s.high
-		     + (u32) uu.s.high * (u32) vv.s.low);
-
-	return w.ll;
-}
diff --git a/arch/arm/lib/sha1.S b/arch/arm/lib/sha1.S
new file mode 100644
index 000000000000..ff6ece487ffc
--- /dev/null
+++ b/arch/arm/lib/sha1.S
@@ -0,0 +1,206 @@
+/*
+ *  linux/arch/arm/lib/sha1.S
+ *
+ *  SHA transform optimized for ARM
+ *
+ *  Copyright:	(C) 2005 by Nicolas Pitre <nico@cam.org>
+ *  Created:	September 17, 2005
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ *  The reference implementation for this code is linux/lib/sha1.c
+ */
+
+#include <linux/linkage.h>
+
+	.text
+
+
+/*
+ * void sha_transform(__u32 *digest, const char *in, __u32 *W)
+ *
+ * Note: the "in" ptr may be unaligned.
+ */
+
+ENTRY(sha_transform)
+
+	stmfd	sp!, {r4 - r8, lr}
+
+	@ for (i = 0; i < 16; i++)
+	@         W[i] = be32_to_cpu(in[i]); */
+
+#ifdef __ARMEB__
+	mov	r4, r0
+	mov	r0, r2
+	mov	r2, #64
+	bl	memcpy
+	mov	r2, r0
+	mov	r0, r4
+#else
+	mov	r3, r2
+	mov	lr, #16
+1:	ldrb	r4, [r1], #1
+	ldrb	r5, [r1], #1
+	ldrb	r6, [r1], #1
+	ldrb	r7, [r1], #1
+	subs	lr, lr, #1
+	orr	r5, r5, r4, lsl #8
+	orr	r6, r6, r5, lsl #8
+	orr	r7, r7, r6, lsl #8
+	str	r7, [r3], #4
+	bne	1b
+#endif
+
+	@ for (i = 0; i < 64; i++)
+	@         W[i+16] = ror(W[i+13] ^ W[i+8] ^ W[i+2] ^ W[i], 31);
+
+	sub	r3, r2, #4
+	mov	lr, #64
+2:	ldr	r4, [r3, #4]!
+	subs	lr, lr, #1
+	ldr	r5, [r3, #8]
+	ldr	r6, [r3, #32]
+	ldr	r7, [r3, #52]
+	eor	r4, r4, r5
+	eor	r4, r4, r6
+	eor	r4, r4, r7
+	mov	r4, r4, ror #31
+	str	r4, [r3, #64]
+	bne	2b
+
+	/*
+	 * The SHA functions are:
+	 *
+	 * f1(B,C,D) = (D ^ (B & (C ^ D)))
+	 * f2(B,C,D) = (B ^ C ^ D)
+	 * f3(B,C,D) = ((B & C) | (D & (B | C)))
+	 *
+	 * Then the sub-blocks are processed as follows:
+	 *
+	 * A' = ror(A, 27) + f(B,C,D) + E + K + *W++
+	 * B' = A
+	 * C' = ror(B, 2)
+	 * D' = C
+	 * E' = D
+	 *
+	 * We therefore unroll each loop 5 times to avoid register shuffling.
+	 * Also the ror for C (and also D and E which are successivelyderived
+	 * from it) is applied in place to cut on an additional mov insn for
+	 * each round.
+	 */
+
+	.macro	sha_f1, A, B, C, D, E
+	ldr	r3, [r2], #4
+	eor	ip, \C, \D
+	add	\E, r1, \E, ror #2
+	and	ip, \B, ip, ror #2
+	add	\E, \E, \A, ror #27
+	eor	ip, ip, \D, ror #2
+	add	\E, \E, r3
+	add	\E, \E, ip
+	.endm
+
+	.macro	sha_f2, A, B, C, D, E
+	ldr	r3, [r2], #4
+	add	\E, r1, \E, ror #2
+	eor	ip, \B, \C, ror #2
+	add	\E, \E, \A, ror #27
+	eor	ip, ip, \D, ror #2
+	add	\E, \E, r3
+	add	\E, \E, ip
+	.endm
+
+	.macro	sha_f3, A, B, C, D, E
+	ldr	r3, [r2], #4
+	add	\E, r1, \E, ror #2
+	orr	ip, \B, \C, ror #2
+	add	\E, \E, \A, ror #27
+	and	ip, ip, \D, ror #2
+	add	\E, \E, r3
+	and	r3, \B, \C, ror #2
+	orr	ip, ip, r3
+	add	\E, \E, ip
+	.endm
+
+	ldmia	r0, {r4 - r8}
+
+	mov	lr, #4
+	ldr	r1, .L_sha_K + 0
+
+	/* adjust initial values */
+	mov	r6, r6, ror #30
+	mov	r7, r7, ror #30
+	mov	r8, r8, ror #30
+
+3:	subs	lr, lr, #1
+	sha_f1	r4, r5, r6, r7, r8
+	sha_f1	r8, r4, r5, r6, r7
+	sha_f1	r7, r8, r4, r5, r6
+	sha_f1	r6, r7, r8, r4, r5
+	sha_f1	r5, r6, r7, r8, r4
+	bne	3b
+
+	ldr	r1, .L_sha_K + 4
+	mov	lr, #4
+
+4:	subs	lr, lr, #1
+	sha_f2	r4, r5, r6, r7, r8
+	sha_f2	r8, r4, r5, r6, r7
+	sha_f2	r7, r8, r4, r5, r6
+	sha_f2	r6, r7, r8, r4, r5
+	sha_f2	r5, r6, r7, r8, r4
+	bne	4b
+
+	ldr	r1, .L_sha_K + 8
+	mov	lr, #4
+
+5:	subs	lr, lr, #1
+	sha_f3	r4, r5, r6, r7, r8
+	sha_f3	r8, r4, r5, r6, r7
+	sha_f3	r7, r8, r4, r5, r6
+	sha_f3	r6, r7, r8, r4, r5
+	sha_f3	r5, r6, r7, r8, r4
+	bne	5b
+
+	ldr	r1, .L_sha_K + 12
+	mov	lr, #4
+
+6:	subs	lr, lr, #1
+	sha_f2	r4, r5, r6, r7, r8
+	sha_f2	r8, r4, r5, r6, r7
+	sha_f2	r7, r8, r4, r5, r6
+	sha_f2	r6, r7, r8, r4, r5
+	sha_f2	r5, r6, r7, r8, r4
+	bne	6b
+
+	ldmia	r0, {r1, r2, r3, ip, lr}
+	add	r4, r1, r4
+	add	r5, r2, r5
+	add	r6, r3, r6, ror #2
+	add	r7, ip, r7, ror #2
+	add	r8, lr, r8, ror #2
+	stmia	r0, {r4 - r8}
+
+	ldmfd	sp!, {r4 - r8, pc}
+
+.L_sha_K:
+	.word	0x5a827999, 0x6ed9eba1, 0x8f1bbcdc, 0xca62c1d6
+
+
+/*
+ * void sha_init(__u32 *buf)
+ */
+
+.L_sha_initial_digest:
+	.word	0x67452301, 0xefcdab89, 0x98badcfe, 0x10325476, 0xc3d2e1f0
+
+ENTRY(sha_init)
+
+	str	lr, [sp, #-4]!
+	adr	r1, .L_sha_initial_digest
+	ldmia	r1, {r1, r2, r3, ip, lr}
+	stmia	r0, {r1, r2, r3, ip, lr}
+	ldr	pc, [sp], #4
+
diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S
index d3ed0636c008..0cc450f863b6 100644
--- a/arch/arm/lib/uaccess.S
+++ b/arch/arm/lib/uaccess.S
@@ -27,7 +27,7 @@
  * Returns  : Number of bytes NOT copied.
  */
 
-.c2u_dest_not_aligned:
+.Lc2u_dest_not_aligned:
 		rsb	ip, ip, #4
 		cmp	ip, #2
 		ldrb	r3, [r1], #1
@@ -37,34 +37,32 @@ USER(		strgebt	r3, [r0], #1)			@ May fault
 		ldrgtb	r3, [r1], #1
 USER(		strgtbt	r3, [r0], #1)			@ May fault
 		sub	r2, r2, ip
-		b	.c2u_dest_aligned
+		b	.Lc2u_dest_aligned
 
 ENTRY(__arch_copy_to_user)
 		stmfd	sp!, {r2, r4 - r7, lr}
 		cmp	r2, #4
-		blt	.c2u_not_enough
-	PLD(	pld	[r1, #0]		)
-	PLD(	pld	[r0, #0]		)
+		blt	.Lc2u_not_enough
 		ands	ip, r0, #3
-		bne	.c2u_dest_not_aligned
-.c2u_dest_aligned:
+		bne	.Lc2u_dest_not_aligned
+.Lc2u_dest_aligned:
 
 		ands	ip, r1, #3
-		bne	.c2u_src_not_aligned
+		bne	.Lc2u_src_not_aligned
 /*
  * Seeing as there has to be at least 8 bytes to copy, we can
  * copy one word, and force a user-mode page fault...
  */
 
-.c2u_0fupi:	subs	r2, r2, #4
+.Lc2u_0fupi:	subs	r2, r2, #4
 		addmi	ip, r2, #4
-		bmi	.c2u_0nowords
+		bmi	.Lc2u_0nowords
 		ldr	r3, [r1], #4
 USER(		strt	r3, [r0], #4)			@ May fault
 		mov	ip, r0, lsl #32 - PAGE_SHIFT	@ On each page, use a ld/st??t instruction
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.c2u_0fupi
+		beq	.Lc2u_0fupi
 /*
  * ip = max no. of bytes to copy before needing another "strt" insn
  */
@@ -72,28 +70,16 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		movlt	ip, r2
 		sub	r2, r2, ip
 		subs	ip, ip, #32
-		blt	.c2u_0rem8lp
-	PLD(	pld	[r1, #28]		)
-	PLD(	pld	[r0, #28]		)
-	PLD(	subs	ip, ip, #64			)
-	PLD(	blt	.c2u_0cpynopld		)
-	PLD(	pld	[r1, #60]		)
-	PLD(	pld	[r0, #60]		)
-
-.c2u_0cpy8lp:
-	PLD(	pld	[r1, #92]		)
-	PLD(	pld	[r0, #92]		)
-.c2u_0cpynopld:	ldmia	r1!, {r3 - r6}
+		blt	.Lc2u_0rem8lp
+
+.Lc2u_0cpy8lp:	ldmia	r1!, {r3 - r6}
 		stmia	r0!, {r3 - r6}			@ Shouldnt fault
 		ldmia	r1!, {r3 - r6}
 		subs	ip, ip, #32
 		stmia	r0!, {r3 - r6}			@ Shouldnt fault
-		bpl	.c2u_0cpy8lp
-	PLD(	cmn	ip, #64			)
-	PLD(	bge	.c2u_0cpynopld		)
-	PLD(	add	ip, ip, #64		)
+		bpl	.Lc2u_0cpy8lp
 
-.c2u_0rem8lp:	cmn	ip, #16
+.Lc2u_0rem8lp:	cmn	ip, #16
 		ldmgeia	r1!, {r3 - r6}
 		stmgeia	r0!, {r3 - r6}			@ Shouldnt fault
 		tst	ip, #8
@@ -103,33 +89,33 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		ldrne	r3, [r1], #4
 		strnet	r3, [r0], #4			@ Shouldnt fault
 		ands	ip, ip, #3
-		beq	.c2u_0fupi
-.c2u_0nowords:	teq	ip, #0
-		beq	.c2u_finished
-.c2u_nowords:	cmp	ip, #2
+		beq	.Lc2u_0fupi
+.Lc2u_0nowords:	teq	ip, #0
+		beq	.Lc2u_finished
+.Lc2u_nowords:	cmp	ip, #2
 		ldrb	r3, [r1], #1
 USER(		strbt	r3, [r0], #1)			@ May fault
 		ldrgeb	r3, [r1], #1
 USER(		strgebt	r3, [r0], #1)			@ May fault
 		ldrgtb	r3, [r1], #1
 USER(		strgtbt	r3, [r0], #1)			@ May fault
-		b	.c2u_finished
+		b	.Lc2u_finished
 
-.c2u_not_enough:
+.Lc2u_not_enough:
 		movs	ip, r2
-		bne	.c2u_nowords
-.c2u_finished:	mov	r0, #0
+		bne	.Lc2u_nowords
+.Lc2u_finished:	mov	r0, #0
 		LOADREGS(fd,sp!,{r2, r4 - r7, pc})
 
-.c2u_src_not_aligned:
+.Lc2u_src_not_aligned:
 		bic	r1, r1, #3
 		ldr	r7, [r1], #4
 		cmp	ip, #2
-		bgt	.c2u_3fupi
-		beq	.c2u_2fupi
-.c2u_1fupi:	subs	r2, r2, #4
+		bgt	.Lc2u_3fupi
+		beq	.Lc2u_2fupi
+.Lc2u_1fupi:	subs	r2, r2, #4
 		addmi	ip, r2, #4
-		bmi	.c2u_1nowords
+		bmi	.Lc2u_1nowords
 		mov	r3, r7, pull #8
 		ldr	r7, [r1], #4
 		orr	r3, r3, r7, push #24
@@ -137,23 +123,14 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		mov	ip, r0, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.c2u_1fupi
+		beq	.Lc2u_1fupi
 		cmp	r2, ip
 		movlt	ip, r2
 		sub	r2, r2, ip
 		subs	ip, ip, #16
-		blt	.c2u_1rem8lp
-	PLD(	pld	[r1, #12]		)
-	PLD(	pld	[r0, #12]		)
-	PLD(	subs	ip, ip, #32		)
-	PLD(	blt	.c2u_1cpynopld		)
-	PLD(	pld	[r1, #28]		)
-	PLD(	pld	[r0, #28]		)
-
-.c2u_1cpy8lp:
-	PLD(	pld	[r1, #44]		)
-	PLD(	pld	[r0, #44]		)
-.c2u_1cpynopld:	mov	r3, r7, pull #8
+		blt	.Lc2u_1rem8lp
+
+.Lc2u_1cpy8lp:	mov	r3, r7, pull #8
 		ldmia	r1!, {r4 - r7}
 		subs	ip, ip, #16
 		orr	r3, r3, r4, push #24
@@ -164,12 +141,9 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		mov	r6, r6, pull #8
 		orr	r6, r6, r7, push #24
 		stmia	r0!, {r3 - r6}			@ Shouldnt fault
-		bpl	.c2u_1cpy8lp
-	PLD(	cmn	ip, #32			)
-	PLD(	bge	.c2u_1cpynopld		)
-	PLD(	add	ip, ip, #32		)
+		bpl	.Lc2u_1cpy8lp
 
-.c2u_1rem8lp:	tst	ip, #8
+.Lc2u_1rem8lp:	tst	ip, #8
 		movne	r3, r7, pull #8
 		ldmneia	r1!, {r4, r7}
 		orrne	r3, r3, r4, push #24
@@ -182,21 +156,21 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		orrne	r3, r3, r7, push #24
 		strnet	r3, [r0], #4			@ Shouldnt fault
 		ands	ip, ip, #3
-		beq	.c2u_1fupi
-.c2u_1nowords:	mov	r3, r7, get_byte_1
+		beq	.Lc2u_1fupi
+.Lc2u_1nowords:	mov	r3, r7, get_byte_1
 		teq	ip, #0
-		beq	.c2u_finished
+		beq	.Lc2u_finished
 		cmp	ip, #2
 USER(		strbt	r3, [r0], #1)			@ May fault
 		movge	r3, r7, get_byte_2
 USER(		strgebt	r3, [r0], #1)			@ May fault
 		movgt	r3, r7, get_byte_3
 USER(		strgtbt	r3, [r0], #1)			@ May fault
-		b	.c2u_finished
+		b	.Lc2u_finished
 
-.c2u_2fupi:	subs	r2, r2, #4
+.Lc2u_2fupi:	subs	r2, r2, #4
 		addmi	ip, r2, #4
-		bmi	.c2u_2nowords
+		bmi	.Lc2u_2nowords
 		mov	r3, r7, pull #16
 		ldr	r7, [r1], #4
 		orr	r3, r3, r7, push #16
@@ -204,23 +178,14 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		mov	ip, r0, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.c2u_2fupi
+		beq	.Lc2u_2fupi
 		cmp	r2, ip
 		movlt	ip, r2
 		sub	r2, r2, ip
 		subs	ip, ip, #16
-		blt	.c2u_2rem8lp
-	PLD(	pld	[r1, #12]		)
-	PLD(	pld	[r0, #12]		)
-	PLD(	subs	ip, ip, #32		)
-	PLD(	blt	.c2u_2cpynopld		)
-	PLD(	pld	[r1, #28]		)
-	PLD(	pld	[r0, #28]		)
-
-.c2u_2cpy8lp:
-	PLD(	pld	[r1, #44]		)
-	PLD(	pld	[r0, #44]		)
-.c2u_2cpynopld:	mov	r3, r7, pull #16
+		blt	.Lc2u_2rem8lp
+
+.Lc2u_2cpy8lp:	mov	r3, r7, pull #16
 		ldmia	r1!, {r4 - r7}
 		subs	ip, ip, #16
 		orr	r3, r3, r4, push #16
@@ -231,12 +196,9 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		mov	r6, r6, pull #16
 		orr	r6, r6, r7, push #16
 		stmia	r0!, {r3 - r6}			@ Shouldnt fault
-		bpl	.c2u_2cpy8lp
-	PLD(	cmn	ip, #32			)
-	PLD(	bge	.c2u_2cpynopld		)
-	PLD(	add	ip, ip, #32		)
+		bpl	.Lc2u_2cpy8lp
 
-.c2u_2rem8lp:	tst	ip, #8
+.Lc2u_2rem8lp:	tst	ip, #8
 		movne	r3, r7, pull #16
 		ldmneia	r1!, {r4, r7}
 		orrne	r3, r3, r4, push #16
@@ -249,21 +211,21 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		orrne	r3, r3, r7, push #16
 		strnet	r3, [r0], #4			@ Shouldnt fault
 		ands	ip, ip, #3
-		beq	.c2u_2fupi
-.c2u_2nowords:	mov	r3, r7, get_byte_2
+		beq	.Lc2u_2fupi
+.Lc2u_2nowords:	mov	r3, r7, get_byte_2
 		teq	ip, #0
-		beq	.c2u_finished
+		beq	.Lc2u_finished
 		cmp	ip, #2
 USER(		strbt	r3, [r0], #1)			@ May fault
 		movge	r3, r7, get_byte_3
 USER(		strgebt	r3, [r0], #1)			@ May fault
 		ldrgtb	r3, [r1], #0
 USER(		strgtbt	r3, [r0], #1)			@ May fault
-		b	.c2u_finished
+		b	.Lc2u_finished
 
-.c2u_3fupi:	subs	r2, r2, #4
+.Lc2u_3fupi:	subs	r2, r2, #4
 		addmi	ip, r2, #4
-		bmi	.c2u_3nowords
+		bmi	.Lc2u_3nowords
 		mov	r3, r7, pull #24
 		ldr	r7, [r1], #4
 		orr	r3, r3, r7, push #8
@@ -271,23 +233,14 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		mov	ip, r0, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.c2u_3fupi
+		beq	.Lc2u_3fupi
 		cmp	r2, ip
 		movlt	ip, r2
 		sub	r2, r2, ip
 		subs	ip, ip, #16
-		blt	.c2u_3rem8lp
-	PLD(	pld	[r1, #12]		)
-	PLD(	pld	[r0, #12]		)
-	PLD(	subs	ip, ip, #32		)
-	PLD(	blt	.c2u_3cpynopld		)
-	PLD(	pld	[r1, #28]		)
-	PLD(	pld	[r0, #28]		)
-
-.c2u_3cpy8lp:
-	PLD(	pld	[r1, #44]		)
-	PLD(	pld	[r0, #44]		)
-.c2u_3cpynopld:	mov	r3, r7, pull #24
+		blt	.Lc2u_3rem8lp
+
+.Lc2u_3cpy8lp:	mov	r3, r7, pull #24
 		ldmia	r1!, {r4 - r7}
 		subs	ip, ip, #16
 		orr	r3, r3, r4, push #8
@@ -298,12 +251,9 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		mov	r6, r6, pull #24
 		orr	r6, r6, r7, push #8
 		stmia	r0!, {r3 - r6}			@ Shouldnt fault
-		bpl	.c2u_3cpy8lp
-	PLD(	cmn	ip, #32			)
-	PLD(	bge	.c2u_3cpynopld		)
-	PLD(	add	ip, ip, #32		)
+		bpl	.Lc2u_3cpy8lp
 
-.c2u_3rem8lp:	tst	ip, #8
+.Lc2u_3rem8lp:	tst	ip, #8
 		movne	r3, r7, pull #24
 		ldmneia	r1!, {r4, r7}
 		orrne	r3, r3, r4, push #8
@@ -316,17 +266,17 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		orrne	r3, r3, r7, push #8
 		strnet	r3, [r0], #4			@ Shouldnt fault
 		ands	ip, ip, #3
-		beq	.c2u_3fupi
-.c2u_3nowords:	mov	r3, r7, get_byte_3
+		beq	.Lc2u_3fupi
+.Lc2u_3nowords:	mov	r3, r7, get_byte_3
 		teq	ip, #0
-		beq	.c2u_finished
+		beq	.Lc2u_finished
 		cmp	ip, #2
 USER(		strbt	r3, [r0], #1)			@ May fault
 		ldrgeb	r3, [r1], #1
 USER(		strgebt	r3, [r0], #1)			@ May fault
 		ldrgtb	r3, [r1], #0
 USER(		strgtbt	r3, [r0], #1)			@ May fault
-		b	.c2u_finished
+		b	.Lc2u_finished
 
 		.section .fixup,"ax"
 		.align	0
@@ -340,7 +290,7 @@ USER(		strgtbt	r3, [r0], #1)			@ May fault
  *          : n    - number of bytes to copy
  * Returns  : Number of bytes NOT copied.
  */
-.cfu_dest_not_aligned:
+.Lcfu_dest_not_aligned:
 		rsb	ip, ip, #4
 		cmp	ip, #2
 USER(		ldrbt	r3, [r1], #1)			@ May fault
@@ -350,33 +300,32 @@ USER(		ldrgebt	r3, [r1], #1)			@ May fault
 USER(		ldrgtbt	r3, [r1], #1)			@ May fault
 		strgtb	r3, [r0], #1
 		sub	r2, r2, ip
-		b	.cfu_dest_aligned
+		b	.Lcfu_dest_aligned
 
 ENTRY(__arch_copy_from_user)
 		stmfd	sp!, {r0, r2, r4 - r7, lr}
 		cmp	r2, #4
-		blt	.cfu_not_enough
-	PLD(	pld	[r1, #0]		)
-	PLD(	pld	[r0, #0]		)
+		blt	.Lcfu_not_enough
 		ands	ip, r0, #3
-		bne	.cfu_dest_not_aligned
-.cfu_dest_aligned:
+		bne	.Lcfu_dest_not_aligned
+.Lcfu_dest_aligned:
 		ands	ip, r1, #3
-		bne	.cfu_src_not_aligned
+		bne	.Lcfu_src_not_aligned
+
 /*
  * Seeing as there has to be at least 8 bytes to copy, we can
  * copy one word, and force a user-mode page fault...
  */
 
-.cfu_0fupi:	subs	r2, r2, #4
+.Lcfu_0fupi:	subs	r2, r2, #4
 		addmi	ip, r2, #4
-		bmi	.cfu_0nowords
+		bmi	.Lcfu_0nowords
 USER(		ldrt	r3, [r1], #4)
 		str	r3, [r0], #4
 		mov	ip, r1, lsl #32 - PAGE_SHIFT	@ On each page, use a ld/st??t instruction
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.cfu_0fupi
+		beq	.Lcfu_0fupi
 /*
  * ip = max no. of bytes to copy before needing another "strt" insn
  */
@@ -384,28 +333,16 @@ USER(		ldrt	r3, [r1], #4)
 		movlt	ip, r2
 		sub	r2, r2, ip
 		subs	ip, ip, #32
-		blt	.cfu_0rem8lp
-	PLD(	pld	[r1, #28]		)
-	PLD(	pld	[r0, #28]		)
-	PLD(	subs	ip, ip, #64			)
-	PLD(	blt	.cfu_0cpynopld		)
-	PLD(	pld	[r1, #60]		)
-	PLD(	pld	[r0, #60]		)
-
-.cfu_0cpy8lp:
-	PLD(	pld	[r1, #92]		)
-	PLD(	pld	[r0, #92]		)
-.cfu_0cpynopld:	ldmia	r1!, {r3 - r6}			@ Shouldnt fault
+		blt	.Lcfu_0rem8lp
+
+.Lcfu_0cpy8lp:	ldmia	r1!, {r3 - r6}			@ Shouldnt fault
 		stmia	r0!, {r3 - r6}
 		ldmia	r1!, {r3 - r6}			@ Shouldnt fault
 		subs	ip, ip, #32
 		stmia	r0!, {r3 - r6}
-		bpl	.cfu_0cpy8lp
-	PLD(	cmn	ip, #64			)
-	PLD(	bge	.cfu_0cpynopld		)
-	PLD(	add	ip, ip, #64		)
+		bpl	.Lcfu_0cpy8lp
 
-.cfu_0rem8lp:	cmn	ip, #16
+.Lcfu_0rem8lp:	cmn	ip, #16
 		ldmgeia	r1!, {r3 - r6}			@ Shouldnt fault
 		stmgeia	r0!, {r3 - r6}
 		tst	ip, #8
@@ -415,34 +352,34 @@ USER(		ldrt	r3, [r1], #4)
 		ldrnet	r3, [r1], #4			@ Shouldnt fault
 		strne	r3, [r0], #4
 		ands	ip, ip, #3
-		beq	.cfu_0fupi
-.cfu_0nowords:	teq	ip, #0
-		beq	.cfu_finished
-.cfu_nowords:	cmp	ip, #2
+		beq	.Lcfu_0fupi
+.Lcfu_0nowords:	teq	ip, #0
+		beq	.Lcfu_finished
+.Lcfu_nowords:	cmp	ip, #2
 USER(		ldrbt	r3, [r1], #1)			@ May fault
 		strb	r3, [r0], #1
 USER(		ldrgebt	r3, [r1], #1)			@ May fault
 		strgeb	r3, [r0], #1
 USER(		ldrgtbt	r3, [r1], #1)			@ May fault
 		strgtb	r3, [r0], #1
-		b	.cfu_finished
+		b	.Lcfu_finished
 
-.cfu_not_enough:
+.Lcfu_not_enough:
 		movs	ip, r2
-		bne	.cfu_nowords
-.cfu_finished:	mov	r0, #0
+		bne	.Lcfu_nowords
+.Lcfu_finished:	mov	r0, #0
 		add	sp, sp, #8
 		LOADREGS(fd,sp!,{r4 - r7, pc})
 
-.cfu_src_not_aligned:
+.Lcfu_src_not_aligned:
 		bic	r1, r1, #3
 USER(		ldrt	r7, [r1], #4)			@ May fault
 		cmp	ip, #2
-		bgt	.cfu_3fupi
-		beq	.cfu_2fupi
-.cfu_1fupi:	subs	r2, r2, #4
+		bgt	.Lcfu_3fupi
+		beq	.Lcfu_2fupi
+.Lcfu_1fupi:	subs	r2, r2, #4
 		addmi	ip, r2, #4
-		bmi	.cfu_1nowords
+		bmi	.Lcfu_1nowords
 		mov	r3, r7, pull #8
 USER(		ldrt	r7, [r1], #4)			@ May fault
 		orr	r3, r3, r7, push #24
@@ -450,23 +387,14 @@ USER(		ldrt	r7, [r1], #4)			@ May fault
 		mov	ip, r1, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.cfu_1fupi
+		beq	.Lcfu_1fupi
 		cmp	r2, ip
 		movlt	ip, r2
 		sub	r2, r2, ip
 		subs	ip, ip, #16
-		blt	.cfu_1rem8lp
-	PLD(	pld	[r1, #12]		)
-	PLD(	pld	[r0, #12]		)
-	PLD(	subs	ip, ip, #32		)
-	PLD(	blt	.cfu_1cpynopld		)
-	PLD(	pld	[r1, #28]		)
-	PLD(	pld	[r0, #28]		)
-
-.cfu_1cpy8lp:
-	PLD(	pld	[r1, #44]		)
-	PLD(	pld	[r0, #44]		)
-.cfu_1cpynopld:	mov	r3, r7, pull #8
+		blt	.Lcfu_1rem8lp
+
+.Lcfu_1cpy8lp:	mov	r3, r7, pull #8
 		ldmia	r1!, {r4 - r7}			@ Shouldnt fault
 		subs	ip, ip, #16
 		orr	r3, r3, r4, push #24
@@ -477,12 +405,9 @@ USER(		ldrt	r7, [r1], #4)			@ May fault
 		mov	r6, r6, pull #8
 		orr	r6, r6, r7, push #24
 		stmia	r0!, {r3 - r6}
-		bpl	.cfu_1cpy8lp
-	PLD(	cmn	ip, #32			)
-	PLD(	bge	.cfu_1cpynopld		)
-	PLD(	add	ip, ip, #32		)
+		bpl	.Lcfu_1cpy8lp
 
-.cfu_1rem8lp:	tst	ip, #8
+.Lcfu_1rem8lp:	tst	ip, #8
 		movne	r3, r7, pull #8
 		ldmneia	r1!, {r4, r7}			@ Shouldnt fault
 		orrne	r3, r3, r4, push #24
@@ -495,21 +420,21 @@ USER(		ldrnet	r7, [r1], #4)			@ May fault
 		orrne	r3, r3, r7, push #24
 		strne	r3, [r0], #4
 		ands	ip, ip, #3
-		beq	.cfu_1fupi
-.cfu_1nowords:	mov	r3, r7, get_byte_1
+		beq	.Lcfu_1fupi
+.Lcfu_1nowords:	mov	r3, r7, get_byte_1
 		teq	ip, #0
-		beq	.cfu_finished
+		beq	.Lcfu_finished
 		cmp	ip, #2
 		strb	r3, [r0], #1
 		movge	r3, r7, get_byte_2
 		strgeb	r3, [r0], #1
 		movgt	r3, r7, get_byte_3
 		strgtb	r3, [r0], #1
-		b	.cfu_finished
+		b	.Lcfu_finished
 
-.cfu_2fupi:	subs	r2, r2, #4
+.Lcfu_2fupi:	subs	r2, r2, #4
 		addmi	ip, r2, #4
-		bmi	.cfu_2nowords
+		bmi	.Lcfu_2nowords
 		mov	r3, r7, pull #16
 USER(		ldrt	r7, [r1], #4)			@ May fault
 		orr	r3, r3, r7, push #16
@@ -517,23 +442,15 @@ USER(		ldrt	r7, [r1], #4)			@ May fault
 		mov	ip, r1, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.cfu_2fupi
+		beq	.Lcfu_2fupi
 		cmp	r2, ip
 		movlt	ip, r2
 		sub	r2, r2, ip
 		subs	ip, ip, #16
-		blt	.cfu_2rem8lp
-	PLD(	pld	[r1, #12]		)
-	PLD(	pld	[r0, #12]		)
-	PLD(	subs	ip, ip, #32		)
-	PLD(	blt	.cfu_2cpynopld		)
-	PLD(	pld	[r1, #28]		)
-	PLD(	pld	[r0, #28]		)
-
-.cfu_2cpy8lp:
-	PLD(	pld	[r1, #44]		)
-	PLD(	pld	[r0, #44]		)
-.cfu_2cpynopld:	mov	r3, r7, pull #16
+		blt	.Lcfu_2rem8lp
+
+
+.Lcfu_2cpy8lp:	mov	r3, r7, pull #16
 		ldmia	r1!, {r4 - r7}			@ Shouldnt fault
 		subs	ip, ip, #16
 		orr	r3, r3, r4, push #16
@@ -544,12 +461,9 @@ USER(		ldrt	r7, [r1], #4)			@ May fault
 		mov	r6, r6, pull #16
 		orr	r6, r6, r7, push #16
 		stmia	r0!, {r3 - r6}
-		bpl	.cfu_2cpy8lp
-	PLD(	cmn	ip, #32			)
-	PLD(	bge	.cfu_2cpynopld		)
-	PLD(	add	ip, ip, #32		)
+		bpl	.Lcfu_2cpy8lp
 
-.cfu_2rem8lp:	tst	ip, #8
+.Lcfu_2rem8lp:	tst	ip, #8
 		movne	r3, r7, pull #16
 		ldmneia	r1!, {r4, r7}			@ Shouldnt fault
 		orrne	r3, r3, r4, push #16
@@ -562,21 +476,21 @@ USER(		ldrnet	r7, [r1], #4)			@ May fault
 		orrne	r3, r3, r7, push #16
 		strne	r3, [r0], #4
 		ands	ip, ip, #3
-		beq	.cfu_2fupi
-.cfu_2nowords:	mov	r3, r7, get_byte_2
+		beq	.Lcfu_2fupi
+.Lcfu_2nowords:	mov	r3, r7, get_byte_2
 		teq	ip, #0
-		beq	.cfu_finished
+		beq	.Lcfu_finished
 		cmp	ip, #2
 		strb	r3, [r0], #1
 		movge	r3, r7, get_byte_3
 		strgeb	r3, [r0], #1
 USER(		ldrgtbt	r3, [r1], #0)			@ May fault
 		strgtb	r3, [r0], #1
-		b	.cfu_finished
+		b	.Lcfu_finished
 
-.cfu_3fupi:	subs	r2, r2, #4
+.Lcfu_3fupi:	subs	r2, r2, #4
 		addmi	ip, r2, #4
-		bmi	.cfu_3nowords
+		bmi	.Lcfu_3nowords
 		mov	r3, r7, pull #24
 USER(		ldrt	r7, [r1], #4)			@ May fault
 		orr	r3, r3, r7, push #8
@@ -584,23 +498,14 @@ USER(		ldrt	r7, [r1], #4)			@ May fault
 		mov	ip, r1, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.cfu_3fupi
+		beq	.Lcfu_3fupi
 		cmp	r2, ip
 		movlt	ip, r2
 		sub	r2, r2, ip
 		subs	ip, ip, #16
-		blt	.cfu_3rem8lp
-	PLD(	pld	[r1, #12]		)
-	PLD(	pld	[r0, #12]		)
-	PLD(	subs	ip, ip, #32		)
-	PLD(	blt	.cfu_3cpynopld		)
-	PLD(	pld	[r1, #28]		)
-	PLD(	pld	[r0, #28]		)
-
-.cfu_3cpy8lp:
-	PLD(	pld	[r1, #44]		)
-	PLD(	pld	[r0, #44]		)
-.cfu_3cpynopld:	mov	r3, r7, pull #24
+		blt	.Lcfu_3rem8lp
+
+.Lcfu_3cpy8lp:	mov	r3, r7, pull #24
 		ldmia	r1!, {r4 - r7}			@ Shouldnt fault
 		orr	r3, r3, r4, push #8
 		mov	r4, r4, pull #24
@@ -611,12 +516,9 @@ USER(		ldrt	r7, [r1], #4)			@ May fault
 		orr	r6, r6, r7, push #8
 		stmia	r0!, {r3 - r6}
 		subs	ip, ip, #16
-		bpl	.cfu_3cpy8lp
-	PLD(	cmn	ip, #32			)
-	PLD(	bge	.cfu_3cpynopld		)
-	PLD(	add	ip, ip, #32		)
+		bpl	.Lcfu_3cpy8lp
 
-.cfu_3rem8lp:	tst	ip, #8
+.Lcfu_3rem8lp:	tst	ip, #8
 		movne	r3, r7, pull #24
 		ldmneia	r1!, {r4, r7}			@ Shouldnt fault
 		orrne	r3, r3, r4, push #8
@@ -629,17 +531,17 @@ USER(		ldrnet	r7, [r1], #4)			@ May fault
 		orrne	r3, r3, r7, push #8
 		strne	r3, [r0], #4
 		ands	ip, ip, #3
-		beq	.cfu_3fupi
-.cfu_3nowords:	mov	r3, r7, get_byte_3
+		beq	.Lcfu_3fupi
+.Lcfu_3nowords:	mov	r3, r7, get_byte_3
 		teq	ip, #0
-		beq	.cfu_finished
+		beq	.Lcfu_finished
 		cmp	ip, #2
 		strb	r3, [r0], #1
 USER(		ldrgebt	r3, [r1], #1)			@ May fault
 		strgeb	r3, [r0], #1
 USER(		ldrgtbt	r3, [r1], #1)			@ May fault
 		strgtb	r3, [r0], #1
-		b	.cfu_finished
+		b	.Lcfu_finished
 
 		.section .fixup,"ax"
 		.align	0
@@ -657,41 +559,3 @@ USER(		ldrgtbt	r3, [r1], #1)			@ May fault
 		LOADREGS(fd,sp!, {r4 - r7, pc})
 		.previous
 
-/* Prototype: int __arch_clear_user(void *addr, size_t sz)
- * Purpose  : clear some user memory
- * Params   : addr - user memory address to clear
- *          : sz   - number of bytes to clear
- * Returns  : number of bytes NOT cleared
- */
-ENTRY(__arch_clear_user)
-		stmfd	sp!, {r1, lr}
-		mov	r2, #0
-		cmp	r1, #4
-		blt	2f
-		ands	ip, r0, #3
-		beq	1f
-		cmp	ip, #2
-USER(		strbt	r2, [r0], #1)
-USER(		strlebt	r2, [r0], #1)
-USER(		strltbt	r2, [r0], #1)
-		rsb	ip, ip, #4
-		sub	r1, r1, ip		@  7  6  5  4  3  2  1
-1:		subs	r1, r1, #8		@ -1 -2 -3 -4 -5 -6 -7
-USER(		strplt	r2, [r0], #4)
-USER(		strplt	r2, [r0], #4)
-		bpl	1b
-		adds	r1, r1, #4		@  3  2  1  0 -1 -2 -3
-USER(		strplt	r2, [r0], #4)
-2:		tst	r1, #2			@ 1x 1x 0x 0x 1x 1x 0x
-USER(		strnebt	r2, [r0], #1)
-USER(		strnebt	r2, [r0], #1)
-		tst	r1, #1			@ x1 x0 x1 x0 x1 x0 x1
-USER(		strnebt	r2, [r0], #1)
-		mov	r0, #0
-		LOADREGS(fd,sp!, {r1, pc})
-
-		.section .fixup,"ax"
-		.align	0
-9001:		LOADREGS(fd,sp!, {r0, pc})
-		.previous
-
diff --git a/arch/arm/lib/ucmpdi2.S b/arch/arm/lib/ucmpdi2.S
new file mode 100644
index 000000000000..112630f93e5d
--- /dev/null
+++ b/arch/arm/lib/ucmpdi2.S
@@ -0,0 +1,35 @@
+/*
+ *  linux/arch/arm/lib/ucmpdi2.S
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Oct 19, 2005
+ *  Copyright:	Monta Vista Software, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+
+#ifdef __ARMEB__
+#define xh r0
+#define xl r1
+#define yh r2
+#define yl r3
+#else
+#define xl r0
+#define xh r1
+#define yl r2
+#define yh r3
+#endif
+
+ENTRY(__ucmpdi2)
+
+	cmp	xh, yh
+	cmpeq	xl, yl
+	movlo	r0, #0
+	moveq	r0, #1
+	movhi	r0, #2
+	mov	pc, lr
+
diff --git a/arch/arm/lib/ucmpdi2.c b/arch/arm/lib/ucmpdi2.c
deleted file mode 100644
index 57f3f2df3850..000000000000
--- a/arch/arm/lib/ucmpdi2.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/* More subroutines needed by GCC output code on some machines.  */
-/* Compile this one with gcc.  */
-/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-/* As a special exception, if you link this library with other files,
-   some of which are compiled with GCC, to produce an executable,
-   this library does not by itself cause the resulting executable
-   to be covered by the GNU General Public License.
-   This exception does not however invalidate any other reasons why
-   the executable file might be covered by the GNU General Public License.
- */
-/* support functions required by the kernel. based on code from gcc-2.95.3 */
-/* I Molton     29/07/01 */
-
-#include "gcclib.h"
-
-int __ucmpdi2(s64 a, s64 b)
-{
-	DIunion au, bu;
-
-	au.ll = a, bu.ll = b;
-
-	if ((u32) au.s.high < (u32) bu.s.high)
-		return 0;
-	else if ((u32) au.s.high > (u32) bu.s.high)
-		return 2;
-	if ((u32) au.s.low < (u32) bu.s.low)
-		return 0;
-	else if ((u32) au.s.low > (u32) bu.s.low)
-		return 2;
-	return 1;
-}
diff --git a/arch/arm/mach-aaec2000/Makefile b/arch/arm/mach-aaec2000/Makefile
index 20ec83896c37..a8e462f58bc9 100644
--- a/arch/arm/mach-aaec2000/Makefile
+++ b/arch/arm/mach-aaec2000/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support (must be linked before board specific support)
-obj-y += core.o
+obj-y += core.o clock.o
 
 # Specific board support
 obj-$(CONFIG_MACH_AAED2000) += aaed2000.o
diff --git a/arch/arm/mach-aaec2000/aaed2000.c b/arch/arm/mach-aaec2000/aaed2000.c
index c9d899886648..f5ef69702296 100644
--- a/arch/arm/mach-aaec2000/aaed2000.c
+++ b/arch/arm/mach-aaec2000/aaed2000.c
@@ -27,16 +27,65 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <asm/arch/aaed2000.h>
+
 #include "core.h"
 
+static void aaed2000_clcd_disable(struct clcd_fb *fb)
+{
+	AAED_EXT_GPIO &= ~AAED_EGPIO_LCD_PWR_EN;
+}
+
+static void aaed2000_clcd_enable(struct clcd_fb *fb)
+{
+	AAED_EXT_GPIO |= AAED_EGPIO_LCD_PWR_EN;
+}
+
+struct aaec2000_clcd_info clcd_info = {
+	.enable = aaed2000_clcd_enable,
+	.disable = aaed2000_clcd_disable,
+	.panel = {
+		.mode	= {
+			.name		= "Sharp",
+			.refresh	= 60,
+			.xres		= 640,
+			.yres		= 480,
+			.pixclock	= 39721,
+			.left_margin	= 20,
+			.right_margin	= 44,
+			.upper_margin	= 21,
+			.lower_margin	= 34,
+			.hsync_len	= 96,
+			.vsync_len	= 2,
+			.sync		= 0,
+			.vmode	= FB_VMODE_NONINTERLACED,
+		},
+		.width	= -1,
+		.height	= -1,
+		.tim2	= TIM2_IVS | TIM2_IHS,
+		.cntl	= CNTL_LCDTFT,
+		.bpp	= 16,
+	},
+};
+
 static void __init aaed2000_init_irq(void)
 {
 	aaec2000_init_irq();
 }
 
+static void __init aaed2000_init(void)
+{
+	aaec2000_set_clcd_plat_data(&clcd_info);
+}
+
+static struct map_desc aaed2000_io_desc[] __initdata = {
+  { EXT_GPIO_VBASE, EXT_GPIO_PBASE, EXT_GPIO_LENGTH, MT_DEVICE }, /* Ext GPIO */
+};
+
 static void __init aaed2000_map_io(void)
 {
 	aaec2000_map_io();
+	iotable_init(aaed2000_io_desc, ARRAY_SIZE(aaed2000_io_desc));
 }
 
 MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform")
@@ -47,4 +96,5 @@ MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform")
 	.map_io		= aaed2000_map_io,
 	.init_irq	= aaed2000_init_irq,
 	.timer		= &aaec2000_timer,
+	.init_machine	= aaed2000_init,
 MACHINE_END
diff --git a/arch/arm/mach-aaec2000/clock.c b/arch/arm/mach-aaec2000/clock.c
new file mode 100644
index 000000000000..0340ddc4824e
--- /dev/null
+++ b/arch/arm/mach-aaec2000/clock.c
@@ -0,0 +1,111 @@
+/*
+ *  linux/arch/arm/mach-aaec2000/clock.c
+ *
+ *  Copyright (C) 2005 Nicolas Bellido Y Ortega
+ *
+ *  Based on linux/arch/arm/mach-integrator/clock.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+
+#include <asm/semaphore.h>
+#include <asm/hardware/clock.h>
+
+#include "clock.h"
+
+static LIST_HEAD(clocks);
+static DECLARE_MUTEX(clocks_sem);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	struct clk *p, *clk = ERR_PTR(-ENOENT);
+
+	down(&clocks_sem);
+	list_for_each_entry(p, &clocks, node) {
+		if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
+			clk = p;
+			break;
+		}
+	}
+	up(&clocks_sem);
+
+	return clk;
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+	module_put(clk->owner);
+}
+EXPORT_SYMBOL(clk_put);
+
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+int clk_use(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_use);
+
+void clk_unuse(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_unuse);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	return rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+int clk_register(struct clk *clk)
+{
+	down(&clocks_sem);
+	list_add(&clk->node, &clocks);
+	up(&clocks_sem);
+	return 0;
+}
+EXPORT_SYMBOL(clk_register);
+
+void clk_unregister(struct clk *clk)
+{
+	down(&clocks_sem);
+	list_del(&clk->node);
+	up(&clocks_sem);
+}
+EXPORT_SYMBOL(clk_unregister);
+
+static int __init clk_init(void)
+{
+	return 0;
+}
+arch_initcall(clk_init);
diff --git a/arch/arm/mach-aaec2000/clock.h b/arch/arm/mach-aaec2000/clock.h
new file mode 100644
index 000000000000..d4bb74ff613f
--- /dev/null
+++ b/arch/arm/mach-aaec2000/clock.h
@@ -0,0 +1,23 @@
+/*
+ *  linux/arch/arm/mach-aaec2000/clock.h
+ *
+ *  Copyright (C) 2005 Nicolas Bellido Y Ortega
+ *
+ *  Based on linux/arch/arm/mach-integrator/clock.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+struct module;
+
+struct clk {
+	struct list_head	node;
+	unsigned long		rate;
+	struct module		*owner;
+	const char		*name;
+	void			*data;
+};
+
+int clk_register(struct clk *clk);
+void clk_unregister(struct clk *clk);
diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c
index aece0cd4f0a3..4e706d9ad368 100644
--- a/arch/arm/mach-aaec2000/core.c
+++ b/arch/arm/mach-aaec2000/core.c
@@ -13,19 +13,27 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/platform_device.h>
 #include <linux/list.h>
 #include <linux/errno.h>
+#include <linux/dma-mapping.h>
 #include <linux/interrupt.h>
 #include <linux/timex.h>
 #include <linux/signal.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
+#include <asm/sizes.h>
+#include <asm/hardware/amba.h>
 
+#include <asm/mach/flash.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
 
+#include "core.h"
+#include "clock.h"
+
 /*
  * Common I/O mapping:
  *
@@ -40,9 +48,17 @@
  * default mapping provided here.
  */
 static struct map_desc standard_io_desc[] __initdata = {
- /* virtual         physical       length           type */
-  { VIO_APB_BASE,   PIO_APB_BASE,  IO_APB_LENGTH,   MT_DEVICE },
-  { VIO_AHB_BASE,   PIO_AHB_BASE,  IO_AHB_LENGTH,   MT_DEVICE }
+	{
+		.virtual	= VIO_APB_BASE,
+		.physical	= __phys_to_pfn(PIO_APB_BASE),
+		.length		= IO_APB_LENGTH,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= VIO_AHB_BASE,
+		.physical	= __phys_to_pfn(PIO_AHB_BASE),
+		.length		= IO_AHB_LENGTH,
+		.type		= MT_DEVICE
+	}
 };
 
 void __init aaec2000_map_io(void)
@@ -155,3 +171,116 @@ struct sys_timer aaec2000_timer = {
 	.offset		= aaec2000_gettimeoffset,
 };
 
+static struct clcd_panel mach_clcd_panel;
+
+static int aaec2000_clcd_setup(struct clcd_fb *fb)
+{
+	dma_addr_t dma;
+
+	fb->panel = &mach_clcd_panel;
+
+	fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, SZ_1M,
+			&dma, GFP_KERNEL);
+
+	if (!fb->fb.screen_base) {
+		printk(KERN_ERR "CLCD: unable to map framebuffer\n");
+		return -ENOMEM;
+	}
+
+	fb->fb.fix.smem_start = dma;
+	fb->fb.fix.smem_len = SZ_1M;
+
+	return 0;
+}
+
+static int aaec2000_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
+{
+	return dma_mmap_writecombine(&fb->dev->dev, vma,
+			fb->fb.screen_base,
+			fb->fb.fix.smem_start,
+			fb->fb.fix.smem_len);
+}
+
+static void aaec2000_clcd_remove(struct clcd_fb *fb)
+{
+	dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
+			fb->fb.screen_base, fb->fb.fix.smem_start);
+}
+
+static struct clcd_board clcd_plat_data = {
+	.name	= "AAEC-2000",
+	.check	= clcdfb_check,
+	.decode	= clcdfb_decode,
+	.setup	= aaec2000_clcd_setup,
+	.mmap	= aaec2000_clcd_mmap,
+	.remove	= aaec2000_clcd_remove,
+};
+
+static struct amba_device clcd_device = {
+	.dev		= {
+		.bus_id			= "mb:16",
+		.coherent_dma_mask	= ~0,
+		.platform_data		= &clcd_plat_data,
+	},
+	.res		= {
+		.start			= AAEC_CLCD_PHYS,
+		.end			= AAEC_CLCD_PHYS + SZ_4K - 1,
+		.flags			= IORESOURCE_MEM,
+	},
+	.irq		= { INT_LCD, NO_IRQ },
+	.periphid	= 0x41110,
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+	&clcd_device,
+};
+
+static struct clk aaec2000_clcd_clk = {
+	.name = "CLCDCLK",
+};
+
+void __init aaec2000_set_clcd_plat_data(struct aaec2000_clcd_info *clcd)
+{
+	clcd_plat_data.enable = clcd->enable;
+	clcd_plat_data.disable = clcd->disable;
+	memcpy(&mach_clcd_panel, &clcd->panel, sizeof(struct clcd_panel));
+}
+
+static struct flash_platform_data aaec2000_flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 4,
+};
+
+static struct resource aaec2000_flash_resource = {
+	.start		= AAEC_FLASH_BASE,
+	.end		= AAEC_FLASH_BASE + AAEC_FLASH_SIZE,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device aaec2000_flash_device = {
+	.name		= "armflash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &aaec2000_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &aaec2000_flash_resource,
+};
+
+static int __init aaec2000_init(void)
+{
+	int i;
+
+	clk_register(&aaec2000_clcd_clk);
+
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+		struct amba_device *d = amba_devs[i];
+		amba_device_register(d, &iomem_resource);
+	}
+
+	platform_device_register(&aaec2000_flash_device);
+
+	return 0;
+};
+arch_initcall(aaec2000_init);
+
diff --git a/arch/arm/mach-aaec2000/core.h b/arch/arm/mach-aaec2000/core.h
index 91893d848c16..daefc0ea14a1 100644
--- a/arch/arm/mach-aaec2000/core.h
+++ b/arch/arm/mach-aaec2000/core.h
@@ -9,8 +9,19 @@
  *
  */
 
+#include <asm/hardware/amba_clcd.h>
+
 struct sys_timer;
 
 extern struct sys_timer aaec2000_timer;
 extern void __init aaec2000_map_io(void);
 extern void __init aaec2000_init_irq(void);
+
+struct aaec2000_clcd_info {
+	struct clcd_panel panel;
+	void (*disable)(struct clcd_fb *);
+	void (*enable)(struct clcd_fb *);
+};
+
+extern void __init aaec2000_set_clcd_plat_data(struct aaec2000_clcd_info *);
+
diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c
index dc73feb1ffb0..43b9423d1440 100644
--- a/arch/arm/mach-clps711x/autcpu12.c
+++ b/arch/arm/mach-clps711x/autcpu12.c
@@ -46,10 +46,14 @@
 */
 
 static struct map_desc autcpu12_io_desc[] __initdata = {
- /* virtual, physical, length, type */
- /* memory-mapped extra io and CS8900A Ethernet chip */
- /* ethernet chip */
- 	{ AUTCPU12_VIRT_CS8900A, AUTCPU12_PHYS_CS8900A, SZ_1M, MT_DEVICE }
+	/* memory-mapped extra io and CS8900A Ethernet chip */
+ 	/* ethernet chip */
+ 	{
+		.virtual	= AUTCPU12_VIRT_CS8900A,
+		.pfn		= __phys_to_pfn(AUTCPU12_PHYS_CS8900A),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE
+	}
 };
 
 void __init autcpu12_map_io(void)
diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c
index a46c82cd2711..cba7be5a06c3 100644
--- a/arch/arm/mach-clps711x/cdb89712.c
+++ b/arch/arm/mach-clps711x/cdb89712.c
@@ -39,7 +39,12 @@
  * ethernet driver, perhaps.
  */
 static struct map_desc cdb89712_io_desc[] __initdata = {
-	{ ETHER_BASE, ETHER_START, ETHER_SIZE, MT_DEVICE }
+	{
+		.virtual	= ETHER_BASE,
+		.pfn		=__phys_to_pfn(ETHER_START),
+		.length		= ETHER_SIZE,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init cdb89712_map_io(void)
diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c
index 780d91805984..35d51a759b59 100644
--- a/arch/arm/mach-clps711x/ceiva.c
+++ b/arch/arm/mach-clps711x/ceiva.c
@@ -37,11 +37,13 @@
 #include "common.h"
 
 static struct map_desc ceiva_io_desc[] __initdata = {
- /* virtual, physical, length, type */
-
- /* SED1355 controlled video RAM & registers */
- { CEIVA_VIRT_SED1355, CEIVA_PHYS_SED1355, SZ_2M, MT_DEVICE }
-
+ 	/* SED1355 controlled video RAM & registers */
+ 	{
+		.virtual	= CEIVA_VIRT_SED1355,
+		.pfn		= __phys_to_pfn(CEIVA_PHYS_SED1355),
+		.length		= SZ_2M,
+		.type		= MT_DEVICE
+	}
 };
 
 
diff --git a/arch/arm/mach-clps711x/edb7211-mm.c b/arch/arm/mach-clps711x/edb7211-mm.c
index 7fd7b01822d0..0d52e0851251 100644
--- a/arch/arm/mach-clps711x/edb7211-mm.c
+++ b/arch/arm/mach-clps711x/edb7211-mm.c
@@ -51,15 +51,27 @@ extern void clps711x_map_io(void);
  *     happens).
  */
 static struct map_desc edb7211_io_desc[] __initdata = {
- /* virtual, physical, length, type */
-
- /* memory-mapped extra keyboard row and CS8900A Ethernet chip */
- { EP7211_VIRT_EXTKBD,  EP7211_PHYS_EXTKBD,  SZ_1M, MT_DEVICE }, 
- { EP7211_VIRT_CS8900A, EP7211_PHYS_CS8900A, SZ_1M, MT_DEVICE },
-
- /* flash banks */
- { EP7211_VIRT_FLASH1,  EP7211_PHYS_FLASH1,  SZ_8M, MT_DEVICE },
- { EP7211_VIRT_FLASH2,  EP7211_PHYS_FLASH2,  SZ_8M, MT_DEVICE }
+ 	{	/* memory-mapped extra keyboard row */
+	 	.virtual 	= EP7211_VIRT_EXTKBD,
+		.pfn		= __phys_to_pfn(EP7211_PHYS_EXTKBD),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE,
+	}, {	/* and CS8900A Ethernet chip */
+		.virtual	= EP7211_VIRT_CS8900A,
+		.pfn		= __phys_to_pfn(EP7211_PHYS_CS8900A),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE,
+	}, { 	/* flash banks */
+		.virtual	= EP7211_VIRT_FLASH1,
+		.pfn		= __phys_to_pfn(EP7211_PHYS_FLASH1),
+		.length		= SZ_8M,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= EP7211_VIRT_FLASH2,
+		.pfn		= __phys_to_pfn(EP7211_PHYS_FLASH2),
+		.length		= SZ_8M,
+		.type		= MT_DEVICE,
+	}
 };
 
 void __init edb7211_map_io(void)
diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c
index f83a59761e02..3d88da0c287b 100644
--- a/arch/arm/mach-clps711x/fortunet.c
+++ b/arch/arm/mach-clps711x/fortunet.c
@@ -31,6 +31,8 @@
 
 #include <asm/mach/arch.h>
 
+#include <asm/memory.h>
+
 #include "common.h"
 
 struct meminfo memmap = {
diff --git a/arch/arm/mach-clps711x/mm.c b/arch/arm/mach-clps711x/mm.c
index 120b7cac84b5..a00f77ef8df8 100644
--- a/arch/arm/mach-clps711x/mm.c
+++ b/arch/arm/mach-clps711x/mm.c
@@ -24,6 +24,7 @@
 #include <linux/init.h>
 #include <linux/bootmem.h>
 
+#include <asm/sizes.h>
 #include <asm/hardware.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
@@ -34,7 +35,12 @@
  * This maps the generic CLPS711x registers
  */
 static struct map_desc clps711x_io_desc[] __initdata = {
- { CLPS7111_VIRT_BASE,	CLPS7111_PHYS_BASE,	1048576, MT_DEVICE }
+	{
+		.virtual	= CLPS7111_VIRT_BASE,
+		.pfn		= __phys_to_pfn(CLPS7111_PHYS_BASE),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE
+	}
 };
 
 void __init clps711x_map_io(void)
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
index 5bdb90edf992..a1acb945fb51 100644
--- a/arch/arm/mach-clps711x/p720t.c
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -29,6 +29,7 @@
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/setup.h>
+#include <asm/sizes.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -42,8 +43,17 @@
  * We map both here.
  */
 static struct map_desc p720t_io_desc[] __initdata = {
-	{ SYSPLD_VIRT_BASE,	SYSPLD_PHYS_BASE, 1048576, MT_DEVICE },
-	{ 0xfe400000,		0x10400000,	  1048576, MT_DEVICE }
+	{
+		.virtual	= SYSPLD_VIRT_BASE,
+		.pfn		= __phys_to_pfn(SYSPLD_PHYS_BASE),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= 0xfe400000,
+		.pfn		= __phys_to_pfn(0x10400000),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init
diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c
index e216ab8b9e8f..d869af0023f8 100644
--- a/arch/arm/mach-clps7500/core.c
+++ b/arch/arm/mach-clps7500/core.c
@@ -259,10 +259,27 @@ static void __init clps7500_init_irq(void)
 }
 
 static struct map_desc cl7500_io_desc[] __initdata = {
-	{ IO_BASE,	IO_START,	IO_SIZE,    MT_DEVICE },	/* IO space	*/
-	{ ISA_BASE,	ISA_START,	ISA_SIZE,   MT_DEVICE },	/* ISA space	*/
-	{ FLASH_BASE,	FLASH_START,	FLASH_SIZE, MT_DEVICE },	/* Flash	*/
-	{ LED_BASE,	LED_START,	LED_SIZE,   MT_DEVICE } 	/* LED		*/
+	{ 	/* IO space	*/
+		.virtual	= (unsigned long)IO_BASE,
+		.pfn		= __phys_to_pfn(IO_START),
+		.length		= IO_SIZE,
+		.type		= MT_DEVICE
+	}, {	/* ISA space	*/
+		.virtual	= ISA_BASE,
+		.pfn		= __phys_to_pfn(ISA_START),
+		.length		= ISA_SIZE,
+		.type		= MT_DEVICE
+	}, {	/* Flash	*/
+		.virtual	= FLASH_BASE,
+		.pfn		= __phys_to_pfn(FLASH_START),
+		.length		= FLASH_SIZE,
+		.type		= MT_DEVICE
+	}, {	/* LED		*/
+		.virtual	= LED_BASE,
+		.pfn		= __phys_to_pfn(LED_START),
+		.length		= LED_SIZE,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init clps7500_map_io(void)
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 5aeadfd72143..ed4614983adb 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -76,16 +76,42 @@ static struct map_desc ebsa110_io_desc[] __initdata = {
 	/*
 	 * sparse external-decode ISAIO space
 	 */
-	{ IRQ_STAT,    TRICK4_PHYS, PGDIR_SIZE,  MT_DEVICE }, /* IRQ_STAT/IRQ_MCLR */
-	{ IRQ_MASK,    TRICK3_PHYS, PGDIR_SIZE,  MT_DEVICE }, /* IRQ_MASK/IRQ_MSET */
-	{ SOFT_BASE,   TRICK1_PHYS, PGDIR_SIZE,  MT_DEVICE }, /* SOFT_BASE */
-	{ PIT_BASE,    TRICK0_PHYS, PGDIR_SIZE,  MT_DEVICE }, /* PIT_BASE */
+	{	/* IRQ_STAT/IRQ_MCLR */
+		.virtual	= IRQ_STAT,
+		.pfn		= __phys_to_pfn(TRICK4_PHYS),
+		.length		= PGDIR_SIZE,
+		.type		= MT_DEVICE
+	}, {	/* IRQ_MASK/IRQ_MSET */
+		.virtual	= IRQ_MASK,
+		.pfn		= __phys_to_pfn(TRICK3_PHYS),
+		.length		= PGDIR_SIZE,
+		.type		= MT_DEVICE
+	}, {	/* SOFT_BASE */
+		.virtual	= SOFT_BASE,
+		.pfn		= __phys_to_pfn(TRICK1_PHYS),
+		.length		= PGDIR_SIZE,
+		.type		= MT_DEVICE
+	}, {	/* PIT_BASE */
+		.virtual	= PIT_BASE,
+		.pfn		= __phys_to_pfn(TRICK0_PHYS),
+		.length		= PGDIR_SIZE,
+		.type		= MT_DEVICE
+	},
 
 	/*
 	 * self-decode ISAIO space
 	 */
-	{ ISAIO_BASE,  ISAIO_PHYS,  ISAIO_SIZE,  MT_DEVICE },
-	{ ISAMEM_BASE, ISAMEM_PHYS, ISAMEM_SIZE, MT_DEVICE }
+	{
+		.virtual	= ISAIO_BASE,
+		.pfn		= __phys_to_pfn(ISAIO_PHYS),
+		.length		= ISAIO_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= ISAMEM_BASE,
+		.pfn		= __phys_to_pfn(ISAMEM_PHYS),
+		.length		= ISAMEM_SIZE,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init ebsa110_map_io(void)
@@ -225,9 +251,33 @@ static struct platform_device serial_device = {
 	},
 };
 
+static struct resource am79c961_resources[] = {
+	{
+		.start		= 0x220,
+		.end		= 0x238,
+		.flags		= IORESOURCE_IO,
+	}, {
+		.start		= IRQ_EBSA110_ETHERNET,
+		.end		= IRQ_EBSA110_ETHERNET,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device am79c961_device = {
+	.name			= "am79c961",
+	.id			= -1,
+	.num_resources		= ARRAY_SIZE(am79c961_resources),
+	.resource		= am79c961_resources,
+};
+
+static struct platform_device *ebsa110_devices[] = {
+	&serial_device,
+	&am79c961_device,
+};
+
 static int __init ebsa110_init(void)
 {
-	return platform_device_register(&serial_device);
+	return platform_add_devices(ebsa110_devices, ARRAY_SIZE(ebsa110_devices));
 }
 
 arch_initcall(ebsa110_init);
diff --git a/arch/arm/mach-ebsa110/io.c b/arch/arm/mach-ebsa110/io.c
index ef7eb5dc91bd..c648bfb676a1 100644
--- a/arch/arm/mach-ebsa110/io.c
+++ b/arch/arm/mach-ebsa110/io.c
@@ -24,6 +24,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 
+#include <asm/hardware.h>
 #include <asm/io.h>
 #include <asm/page.h>
 
diff --git a/arch/arm/mach-epxa10db/mm.c b/arch/arm/mach-epxa10db/mm.c
index 2aa57fa46da3..cfd0d2182d44 100644
--- a/arch/arm/mach-epxa10db/mm.c
+++ b/arch/arm/mach-epxa10db/mm.c
@@ -25,18 +25,44 @@
 #include <asm/hardware.h>
 #include <asm/io.h>
 #include <asm/sizes.h>
+#include <asm/page.h>
  
 #include <asm/mach/map.h>
 
 /* Page table mapping for I/O region */
  
 static struct map_desc epxa10db_io_desc[] __initdata = {
- { IO_ADDRESS(EXC_REGISTERS_BASE),   EXC_REGISTERS_BASE,    SZ_16K, MT_DEVICE }, 
- { IO_ADDRESS(EXC_PLD_BLOCK0_BASE),  EXC_PLD_BLOCK0_BASE,   SZ_16K, MT_DEVICE }, 
- { IO_ADDRESS(EXC_PLD_BLOCK1_BASE),  EXC_PLD_BLOCK1_BASE,   SZ_16K, MT_DEVICE }, 
- { IO_ADDRESS(EXC_PLD_BLOCK2_BASE),  EXC_PLD_BLOCK2_BASE,   SZ_16K, MT_DEVICE }, 
- { IO_ADDRESS(EXC_PLD_BLOCK3_BASE),  EXC_PLD_BLOCK3_BASE,   SZ_16K, MT_DEVICE }, 
- { FLASH_VADDR(EXC_EBI_BLOCK0_BASE), EXC_EBI_BLOCK0_BASE,   SZ_16M, MT_DEVICE }
+	{
+		.virtual	= IO_ADDRESS(EXC_REGISTERS_BASE),
+		.pfn		= __phys_to_pfn(EXC_REGISTERS_BASE),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(EXC_PLD_BLOCK0_BASE),
+		.pfn		= __phys_to_pfn(EXC_PLD_BLOCK0_BASE),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(EXC_PLD_BLOCK1_BASE),
+		.pfn		=__phys_to_pfn(EXC_PLD_BLOCK1_BASE),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(EXC_PLD_BLOCK2_BASE),
+		.physical	= __phys_to_pfn(EXC_PLD_BLOCK2_BASE),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(EXC_PLD_BLOCK3_BASE),
+		.pfn		= __phys_to_pfn(EXC_PLD_BLOCK3_BASE),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= FLASH_VADDR(EXC_EBI_BLOCK0_BASE),
+		.pfn		= __phys_to_pfn(EXC_EBI_BLOCK0_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	}
 };
 
 void __init epxa10db_map_io(void)
diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
index eb8238c1ef06..bbe6e4a0bf6a 100644
--- a/arch/arm/mach-footbridge/common.c
+++ b/arch/arm/mach-footbridge/common.c
@@ -130,8 +130,17 @@ void __init footbridge_init_irq(void)
  * it means that we have extra bullet protection on our feet.
  */
 static struct map_desc fb_common_io_desc[] __initdata = {
- { ARMCSR_BASE,	 DC21285_ARMCSR_BASE,	    ARMCSR_SIZE,  MT_DEVICE },
- { XBUS_BASE,    0x40000000,		    XBUS_SIZE,    MT_DEVICE }
+	{
+		.virtual	= ARMCSR_BASE,
+		.pfn		= __phys_to_pfn(DC21285_ARMCSR_BASE),
+		.length		= ARMCSR_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= XBUS_BASE,
+		.pfn		= __phys_to_pfn(0x40000000),
+		.length		= XBUS_SIZE,
+		.type		= MT_DEVICE,
+	}
 };
 
 /*
@@ -140,11 +149,32 @@ static struct map_desc fb_common_io_desc[] __initdata = {
  */
 static struct map_desc ebsa285_host_io_desc[] __initdata = {
 #if defined(CONFIG_ARCH_FOOTBRIDGE) && defined(CONFIG_FOOTBRIDGE_HOST)
- { PCIMEM_BASE,  DC21285_PCI_MEM,	    PCIMEM_SIZE,  MT_DEVICE },
- { PCICFG0_BASE, DC21285_PCI_TYPE_0_CONFIG, PCICFG0_SIZE, MT_DEVICE },
- { PCICFG1_BASE, DC21285_PCI_TYPE_1_CONFIG, PCICFG1_SIZE, MT_DEVICE },
- { PCIIACK_BASE, DC21285_PCI_IACK,	    PCIIACK_SIZE, MT_DEVICE },
- { PCIO_BASE,    DC21285_PCI_IO,	    PCIO_SIZE,	  MT_DEVICE }
+	{
+		.virtual	= PCIMEM_BASE,
+		.pfn		= __phys_to_pfn(DC21285_PCI_MEM),
+		.length		= PCIMEM_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= PCICFG0_BASE,
+		.pfn		= __phys_to_pfn(DC21285_PCI_TYPE_0_CONFIG),
+		.length		= PCICFG0_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= PCICFG1_BASE,
+		.pfn		= __phys_to_pfn(DC21285_PCI_TYPE_1_CONFIG),
+		.length		= PCICFG1_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= PCIIACK_BASE,
+		.pfn		= __phys_to_pfn(DC21285_PCI_IACK),
+		.length		= PCIIACK_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= PCIO_BASE,
+		.pfn		= __phys_to_pfn(DC21285_PCI_IO),
+		.length		= PCIO_SIZE,
+		.type		= MT_DEVICE,
+	},
 #endif
 };
 
@@ -153,8 +183,17 @@ static struct map_desc ebsa285_host_io_desc[] __initdata = {
  */
 static struct map_desc co285_io_desc[] __initdata = {
 #ifdef CONFIG_ARCH_CO285
- { PCIO_BASE,	 DC21285_PCI_IO,	    PCIO_SIZE,    MT_DEVICE },
- { PCIMEM_BASE,	 DC21285_PCI_MEM,	    PCIMEM_SIZE,  MT_DEVICE }
+	{
+		.virtual	= PCIO_BASE,
+		.pfn		= __phys_to_pfn(DC21285_PCI_IO),
+		.length		= PCIO_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= PCIMEM_BASE,
+		.pfn		= __phys_to_pfn(DC21285_PCI_MEM),
+		.length		= PCIMEM_SIZE,
+		.type		= MT_DEVICE,
+	},
 #endif
 };
 
diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c
index 5110e2e65ddd..c096b4569308 100644
--- a/arch/arm/mach-h720x/common.c
+++ b/arch/arm/mach-h720x/common.c
@@ -237,7 +237,12 @@ void __init h720x_init_irq (void)
 }
 
 static struct map_desc h720x_io_desc[] __initdata = {
-	{ IO_VIRT, IO_PHYS, IO_SIZE, MT_DEVICE },
+	{
+		.virtual	= IO_VIRT,
+		.pfn		= __phys_to_pfn(IO_PHYS),
+		.length		= IO_SIZE,
+		.type		= MT_DEVICE
+	},
 };
 
 /* Initialize io tables */
diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c
index db9078ad008c..d75c8221d2a5 100644
--- a/arch/arm/mach-h720x/h7202-eval.c
+++ b/arch/arm/mach-h720x/h7202-eval.c
@@ -18,7 +18,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/string.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/setup.h>
 #include <asm/types.h>
diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c
index 41e5849ae8da..37613ad68366 100644
--- a/arch/arm/mach-imx/generic.c
+++ b/arch/arm/mach-imx/generic.c
@@ -22,20 +22,23 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  *
  */
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/string.h>
+
 #include <asm/arch/imxfb.h>
 #include <asm/hardware.h>
+#include <asm/arch/imx-regs.h>
 
 #include <asm/mach/map.h>
 
 void imx_gpio_mode(int gpio_mode)
 {
 	unsigned int pin = gpio_mode & GPIO_PIN_MASK;
-	unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> 5;
-	unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> 10;
+	unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
+	unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
 	unsigned int tmp;
 
 	/* Pullup enable */
@@ -57,7 +60,7 @@ void imx_gpio_mode(int gpio_mode)
 		GPR(port) &= ~(1<<pin);
 
 	/* use as gpio? */
-	if( ocr == 3 )
+	if(gpio_mode &  GPIO_GIUS)
 		GIUS(port) |= (1<<pin);
 	else
 		GIUS(port) &= ~(1<<pin);
@@ -72,20 +75,20 @@ void imx_gpio_mode(int gpio_mode)
 		tmp |= (ocr << (pin*2));
 		OCR1(port) = tmp;
 
-		if( gpio_mode &	GPIO_AOUT )
-			ICONFA1(port) &= ~( 3<<(pin*2));
-		if( gpio_mode &	GPIO_BOUT )
-			ICONFB1(port) &= ~( 3<<(pin*2));
+		ICONFA1(port) &= ~( 3<<(pin*2));
+		ICONFA1(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2);
+		ICONFB1(port) &= ~( 3<<(pin*2));
+		ICONFB1(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2);
 	} else {
 		tmp = OCR2(port);
 		tmp &= ~( 3<<((pin-16)*2));
 		tmp |= (ocr << ((pin-16)*2));
 		OCR2(port) = tmp;
 
-		if( gpio_mode &	GPIO_AOUT )
-			ICONFA2(port) &= ~( 3<<((pin-16)*2));
-		if( gpio_mode &	GPIO_BOUT )
-			ICONFB2(port) &= ~( 3<<((pin-16)*2));
+		ICONFA2(port) &= ~( 3<<((pin-16)*2));
+		ICONFA2(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << ((pin-16) * 2);
+		ICONFB2(port) &= ~( 3<<((pin-16)*2));
+		ICONFB2(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << ((pin-16) * 2);
 	}
 }
 
@@ -272,8 +275,12 @@ static struct platform_device *devices[] __initdata = {
 };
 
 static struct map_desc imx_io_desc[] __initdata = {
-	/* virtual     physical    length      type */
-	{IMX_IO_BASE, IMX_IO_PHYS, IMX_IO_SIZE, MT_DEVICE},
+	{
+		.virtual	= IMX_IO_BASE,
+		.pfn		= __phys_to_pfn(IMX_IO_PHYS),
+		.length		= IMX_IO_SIZE,
+		.type		= MT_DEVICE
+	}
 };
 
 void __init
diff --git a/arch/arm/mach-imx/leds-mx1ads.c b/arch/arm/mach-imx/leds-mx1ads.c
index e6399b06e4a4..79236404aec2 100644
--- a/arch/arm/mach-imx/leds-mx1ads.c
+++ b/arch/arm/mach-imx/leds-mx1ads.c
@@ -17,7 +17,6 @@
 #include <asm/system.h>
 #include <asm/io.h>
 #include <asm/leds.h>
-#include <asm/mach-types.h>
 #include "leds.h"
 
 /*
diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c
index 5d25434d332c..708e1b3faa14 100644
--- a/arch/arm/mach-imx/mx1ads.c
+++ b/arch/arm/mach-imx/mx1ads.c
@@ -14,6 +14,7 @@
 
 #include <linux/device.h>
 #include <linux/init.h>
+#include <linux/platform_device.h>
 #include <asm/system.h>
 #include <asm/hardware.h>
 #include <asm/irq.h>
@@ -55,19 +56,43 @@ static void __init
 mx1ads_init(void)
 {
 #ifdef CONFIG_LEDS
-	imx_gpio_mode(GPIO_PORTA | GPIO_OUT | GPIO_GPIO | 2);
+	imx_gpio_mode(GPIO_PORTA | GPIO_OUT | 2);
 #endif
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
 static struct map_desc mx1ads_io_desc[] __initdata = {
-	/* virtual     physical    length      type */
-	{IMX_CS0_VIRT, IMX_CS0_PHYS, IMX_CS0_SIZE, MT_DEVICE},
-	{IMX_CS1_VIRT, IMX_CS1_PHYS, IMX_CS1_SIZE, MT_DEVICE},
-	{IMX_CS2_VIRT, IMX_CS2_PHYS, IMX_CS2_SIZE, MT_DEVICE},
-	{IMX_CS3_VIRT, IMX_CS3_PHYS, IMX_CS3_SIZE, MT_DEVICE},
-	{IMX_CS4_VIRT, IMX_CS4_PHYS, IMX_CS4_SIZE, MT_DEVICE},
-	{IMX_CS5_VIRT, IMX_CS5_PHYS, IMX_CS5_SIZE, MT_DEVICE},
+	{
+		.virtual	= IMX_CS0_VIRT,
+		.pfn		= __phys_to_pfn(IMX_CS0_PHYS),
+		.length		= IMX_CS0_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IMX_CS1_VIRT,
+		.pfn		= __phys_to_pfn(IMX_CS1_PHYS),
+		.length		= IMX_CS1_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IMX_CS2_VIRT,
+		.pfn		= __phys_to_pfn(IMX_CS2_PHYS),
+		.length		= IMX_CS2_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IMX_CS3_VIRT,
+		.pfn		= __phys_to_pfn(IMX_CS3_PHYS),
+		.length		= IMX_CS3_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IMX_CS4_VIRT,
+		.pfn		= __phys_to_pfn(IMX_CS4_PHYS),
+		.length		= IMX_CS4_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IMX_CS5_VIRT,
+		.pfn		= __phys_to_pfn(IMX_CS5_PHYS),
+		.length		= IMX_CS5_SIZE,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init
diff --git a/arch/arm/mach-integrator/clock.c b/arch/arm/mach-integrator/clock.c
index 56200594db3c..73c360685cad 100644
--- a/arch/arm/mach-integrator/clock.c
+++ b/arch/arm/mach-integrator/clock.c
@@ -13,6 +13,7 @@
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
+#include <linux/string.h>
 
 #include <asm/semaphore.h>
 #include <asm/hardware/clock.h>
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index c3c2f17d030e..a4bafee77a06 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -67,7 +67,7 @@ static void impd1_setvco(struct clk *clk, struct icst525_vco vco)
 	}
 	writel(0, impd1->base + IMPD1_LOCK);
 
-#if DEBUG
+#ifdef DEBUG
 	vco.v = val & 0x1ff;
 	vco.r = (val >> 9) & 0x7f;
 	vco.s = (val >> 16) & 7;
@@ -420,24 +420,24 @@ static int impd1_probe(struct lm_device *dev)
  free_impd1:
 	if (impd1 && impd1->base)
 		iounmap(impd1->base);
-	if (impd1)
-		kfree(impd1);
+	kfree(impd1);
  release_lm:
 	release_mem_region(dev->resource.start, SZ_4K);
 	return ret;
 }
 
+static int impd1_remove_one(struct device *dev, void *data)
+{
+	device_unregister(dev);
+	return 0;
+}
+
 static void impd1_remove(struct lm_device *dev)
 {
 	struct impd1_module *impd1 = lm_get_drvdata(dev);
-	struct list_head *l, *n;
 	int i;
 
-	list_for_each_safe(l, n, &dev->dev.children) {
-		struct device *d = list_to_dev(l);
-
-		device_unregister(d);
-	}
+	device_for_each_child(&dev->dev, NULL, impd1_remove_one);
 
 	for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++)
 		clk_unregister(&impd1->vcos[i]);
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 36e2b6eb67b7..4c0f7c65facf 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -21,7 +21,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/list.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/sysdev.h>
@@ -30,6 +30,7 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
+#include <asm/param.h>		/* HZ */
 #include <asm/mach-types.h>
 #include <asm/hardware/amba.h>
 #include <asm/hardware/amba_kmi.h>
@@ -75,19 +76,72 @@
  */
 
 static struct map_desc ap_io_desc[] __initdata = {
- { IO_ADDRESS(INTEGRATOR_HDR_BASE),   INTEGRATOR_HDR_BASE,   SZ_4K,  MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_SC_BASE),    INTEGRATOR_SC_BASE,    SZ_4K,  MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_EBI_BASE),   INTEGRATOR_EBI_BASE,   SZ_4K,  MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_CT_BASE),    INTEGRATOR_CT_BASE,    SZ_4K,  MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_IC_BASE),    INTEGRATOR_IC_BASE,    SZ_4K,  MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_UART0_BASE), INTEGRATOR_UART0_BASE, SZ_4K,  MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_UART1_BASE), INTEGRATOR_UART1_BASE, SZ_4K,  MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_DBG_BASE),   INTEGRATOR_DBG_BASE,   SZ_4K,  MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_GPIO_BASE),  INTEGRATOR_GPIO_BASE,  SZ_4K,  MT_DEVICE },
- { PCI_MEMORY_VADDR,                  PHYS_PCI_MEM_BASE,     SZ_16M, MT_DEVICE },
- { PCI_CONFIG_VADDR,                  PHYS_PCI_CONFIG_BASE,  SZ_16M, MT_DEVICE },
- { PCI_V3_VADDR,                      PHYS_PCI_V3_BASE,      SZ_64K, MT_DEVICE },
- { PCI_IO_VADDR,                      PHYS_PCI_IO_BASE,      SZ_64K, MT_DEVICE }
+	{
+		.virtual	= IO_ADDRESS(INTEGRATOR_HDR_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_HDR_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_SC_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_SC_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_EBI_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_EBI_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_CT_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_CT_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_IC_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_IC_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_UART0_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_UART0_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_UART1_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_UART1_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_DBG_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_DBG_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_GPIO_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_GPIO_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= PCI_MEMORY_VADDR,
+		.pfn		= __phys_to_pfn(PHYS_PCI_MEM_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= PCI_CONFIG_VADDR,
+		.pfn		= __phys_to_pfn(PHYS_PCI_CONFIG_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= PCI_V3_VADDR,
+		.pfn		= __phys_to_pfn(PHYS_PCI_V3_BASE),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= PCI_IO_VADDR,
+		.pfn		= __phys_to_pfn(PHYS_PCI_IO_BASE),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init ap_map_io(void)
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 2be5c03ab87f..93f7ccb22c27 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -11,7 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/list.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
 #include <linux/string.h>
@@ -74,17 +74,62 @@
  */
 
 static struct map_desc intcp_io_desc[] __initdata = {
- { IO_ADDRESS(INTEGRATOR_HDR_BASE),   INTEGRATOR_HDR_BASE,   SZ_4K,  MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_SC_BASE),    INTEGRATOR_SC_BASE,    SZ_4K,  MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_EBI_BASE),   INTEGRATOR_EBI_BASE,   SZ_4K,  MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_CT_BASE),    INTEGRATOR_CT_BASE,    SZ_4K,  MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_IC_BASE),    INTEGRATOR_IC_BASE,    SZ_4K,  MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_UART0_BASE), INTEGRATOR_UART0_BASE, SZ_4K,  MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_UART1_BASE), INTEGRATOR_UART1_BASE, SZ_4K,  MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_DBG_BASE),   INTEGRATOR_DBG_BASE,   SZ_4K,  MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_GPIO_BASE),  INTEGRATOR_GPIO_BASE,  SZ_4K,  MT_DEVICE },
- { 0xfca00000, 0xca000000, SZ_4K, MT_DEVICE },
- { 0xfcb00000, 0xcb000000, SZ_4K, MT_DEVICE },
+	{
+		.virtual	= IO_ADDRESS(INTEGRATOR_HDR_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_HDR_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_SC_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_SC_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_EBI_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_EBI_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_CT_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_CT_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_IC_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_IC_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_UART0_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_UART0_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_UART1_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_UART1_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_DBG_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_DBG_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_GPIO_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_GPIO_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= 0xfca00000,
+		.pfn		= __phys_to_pfn(0xca000000),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= 0xfcb00000,
+		.pfn		= __phys_to_pfn(0xcb000000),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init intcp_map_io(void)
diff --git a/arch/arm/mach-integrator/lm.c b/arch/arm/mach-integrator/lm.c
index c5f19d160598..5b41e3a724e1 100644
--- a/arch/arm/mach-integrator/lm.c
+++ b/arch/arm/mach-integrator/lm.c
@@ -10,6 +10,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/slab.h>
 
 #include <asm/arch/lm.h>
 
diff --git a/arch/arm/mach-iop3xx/common.c b/arch/arm/mach-iop3xx/common.c
index bda7394ec06c..fdeeef489a73 100644
--- a/arch/arm/mach-iop3xx/common.c
+++ b/arch/arm/mach-iop3xx/common.c
@@ -27,7 +27,6 @@ unsigned long iop3xx_pcibios_min_mem = 0;
 /*
  * Default power-off for EP80219
  */
-#include <asm/mach-types.h>
 
 static inline void ep80219_send_to_pic(__u8 c) {
 }
diff --git a/arch/arm/mach-iop3xx/iop321-setup.c b/arch/arm/mach-iop3xx/iop321-setup.c
index 0f921ba2750c..80770233b8d4 100644
--- a/arch/arm/mach-iop3xx/iop321-setup.c
+++ b/arch/arm/mach-iop3xx/iop321-setup.c
@@ -16,7 +16,7 @@
 #include <linux/init.h>
 #include <linux/major.h>
 #include <linux/fs.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_core.h>
@@ -38,13 +38,17 @@
  * Standard IO mapping for all IOP321 based systems
  */
 static struct map_desc iop321_std_desc[] __initdata = {
- /* virtual     physical      length      type */
-
- /* mem mapped registers */
- { IOP321_VIRT_MEM_BASE,  IOP321_PHYS_MEM_BASE,   0x00002000,  MT_DEVICE },
-
- /* PCI IO space */
- { IOP321_PCI_LOWER_IO_VA,  IOP321_PCI_LOWER_IO_PA,   IOP321_PCI_IO_WINDOW_SIZE,  MT_DEVICE }
+	 {	/* mem mapped registers */
+		.virtual	= IOP321_VIRT_MEM_BASE,
+		.pfn		= __phys_to_pfn(IOP321_PHYS_MEM_BASE),
+		.length		= 0x00002000,
+		.type		= MT_DEVICE
+	 }, {	/* PCI IO space */
+		.virtual	= IOP321_PCI_LOWER_IO_VA,
+		.pfn		= __phys_to_pfn(IOP321_PCI_LOWER_IO_PA),
+		.length		= IOP321_PCI_IO_WINDOW_SIZE,
+		.type		= MT_DEVICE
+	 }
 };
 
 #ifdef CONFIG_ARCH_IQ80321
diff --git a/arch/arm/mach-iop3xx/iop321-time.c b/arch/arm/mach-iop3xx/iop321-time.c
index 0039793b694a..d67ac0e5d438 100644
--- a/arch/arm/mach-iop3xx/iop321-time.c
+++ b/arch/arm/mach-iop3xx/iop321-time.c
@@ -23,7 +23,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
-#include <asm/mach-types.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
diff --git a/arch/arm/mach-iop3xx/iop331-setup.c b/arch/arm/mach-iop3xx/iop331-setup.c
index fc74b722f72f..53f60614498b 100644
--- a/arch/arm/mach-iop3xx/iop331-setup.c
+++ b/arch/arm/mach-iop3xx/iop331-setup.c
@@ -15,7 +15,7 @@
 #include <linux/init.h>
 #include <linux/major.h>
 #include <linux/fs.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_core.h>
@@ -37,13 +37,17 @@
  * Standard IO mapping for all IOP331 based systems
  */
 static struct map_desc iop331_std_desc[] __initdata = {
- /* virtual     physical      length      type */
-
- /* mem mapped registers */
- { IOP331_VIRT_MEM_BASE,  IOP331_PHYS_MEM_BASE,   0x00002000,  MT_DEVICE },
-
- /* PCI IO space */
- { IOP331_PCI_LOWER_IO_VA,  IOP331_PCI_LOWER_IO_PA,   IOP331_PCI_IO_WINDOW_SIZE,  MT_DEVICE }
+	{	/* mem mapped registers */
+		.virtual	= IOP331_VIRT_MEM_BASE,
+		.pfn		= __phys_to_pfn(IOP331_PHYS_MEM_BASE),
+		.length		= 0x00002000,
+		.type		= MT_DEVICE
+	}, {	/* PCI IO space */
+		.virtual	= IOP331_PCI_LOWER_IO_VA,
+		.pfn		= __phys_to_pfn(IOP331_PCI_LOWER_IO_PA),
+		.length		= IOP331_PCI_IO_WINDOW_SIZE,
+		.type		= MT_DEVICE
+	}
 };
 
 static struct uart_port iop331_serial_ports[] = {
diff --git a/arch/arm/mach-iop3xx/iop331-time.c b/arch/arm/mach-iop3xx/iop331-time.c
index 8eddfac7e2b0..3c1f0ebbd636 100644
--- a/arch/arm/mach-iop3xx/iop331-time.c
+++ b/arch/arm/mach-iop3xx/iop331-time.c
@@ -23,7 +23,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
-#include <asm/mach-types.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
diff --git a/arch/arm/mach-iop3xx/iq31244-mm.c b/arch/arm/mach-iop3xx/iq31244-mm.c
index b01042f7de71..e874b54eefe3 100644
--- a/arch/arm/mach-iop3xx/iq31244-mm.c
+++ b/arch/arm/mach-iop3xx/iq31244-mm.c
@@ -21,7 +21,6 @@
 #include <asm/page.h>
 
 #include <asm/mach/map.h>
-#include <asm/mach-types.h>
 
 
 /*
@@ -30,10 +29,12 @@
  * We use RedBoot's setup for the onboard devices.
  */
 static struct map_desc iq31244_io_desc[] __initdata = {
- /* virtual     physical      length        type */
-
- /* on-board devices */
- { IQ31244_UART, IQ31244_UART,   0x00100000,   MT_DEVICE }
+	{	/* on-board devices */
+		.virtual	= IQ31244_UART,
+		.pfn		= __phys_to_pfn(IQ31244_UART),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}
 };
 
 void __init iq31244_map_io(void)
diff --git a/arch/arm/mach-iop3xx/iq31244-pci.c b/arch/arm/mach-iop3xx/iq31244-pci.c
index f997daa800bf..c6a973ba8fc6 100644
--- a/arch/arm/mach-iop3xx/iq31244-pci.c
+++ b/arch/arm/mach-iop3xx/iq31244-pci.c
@@ -14,6 +14,8 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <linux/string.h>
+#include <linux/slab.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
diff --git a/arch/arm/mach-iop3xx/iq80321-mm.c b/arch/arm/mach-iop3xx/iq80321-mm.c
index 1580c7ed2b9d..d9cac5e1fc3d 100644
--- a/arch/arm/mach-iop3xx/iq80321-mm.c
+++ b/arch/arm/mach-iop3xx/iq80321-mm.c
@@ -21,7 +21,6 @@
 #include <asm/page.h>
 
 #include <asm/mach/map.h>
-#include <asm/mach-types.h>
 
 
 /*
@@ -30,10 +29,12 @@
  * We use RedBoot's setup for the onboard devices.
  */
 static struct map_desc iq80321_io_desc[] __initdata = {
- /* virtual     physical      length        type */
-
- /* on-board devices */
- { IQ80321_UART, IQ80321_UART,   0x00100000,   MT_DEVICE }
+ 	{	/* on-board devices */
+		.virtual	= IQ80321_UART,
+		.pfn		= __phys_to_pfn(IQ80321_UART),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}
 };
 
 void __init iq80321_map_io(void)
diff --git a/arch/arm/mach-iop3xx/iq80321-pci.c b/arch/arm/mach-iop3xx/iq80321-pci.c
index 79fea3d20b66..802f6d091b75 100644
--- a/arch/arm/mach-iop3xx/iq80321-pci.c
+++ b/arch/arm/mach-iop3xx/iq80321-pci.c
@@ -14,6 +14,8 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <linux/string.h>
+#include <linux/slab.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
diff --git a/arch/arm/mach-iop3xx/iq80331-mm.c b/arch/arm/mach-iop3xx/iq80331-mm.c
index ee8c333e115f..129eb49b0670 100644
--- a/arch/arm/mach-iop3xx/iq80331-mm.c
+++ b/arch/arm/mach-iop3xx/iq80331-mm.c
@@ -21,7 +21,6 @@
 #include <asm/page.h>
 
 #include <asm/mach/map.h>
-#include <asm/mach-types.h>
 
 
 /*
diff --git a/arch/arm/mach-iop3xx/iq80331-pci.c b/arch/arm/mach-iop3xx/iq80331-pci.c
index f37a0e26b466..654e450a1311 100644
--- a/arch/arm/mach-iop3xx/iq80331-pci.c
+++ b/arch/arm/mach-iop3xx/iq80331-pci.c
@@ -13,6 +13,8 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <linux/string.h>
+#include <linux/slab.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
diff --git a/arch/arm/mach-iop3xx/iq80332-mm.c b/arch/arm/mach-iop3xx/iq80332-mm.c
index 084afcdfb1eb..2feaf7591f53 100644
--- a/arch/arm/mach-iop3xx/iq80332-mm.c
+++ b/arch/arm/mach-iop3xx/iq80332-mm.c
@@ -21,7 +21,6 @@
 #include <asm/page.h>
 
 #include <asm/mach/map.h>
-#include <asm/mach-types.h>
 
 
 /*
diff --git a/arch/arm/mach-iop3xx/iq80332-pci.c b/arch/arm/mach-iop3xx/iq80332-pci.c
index b9807aa2aade..65951ffe4631 100644
--- a/arch/arm/mach-iop3xx/iq80332-pci.c
+++ b/arch/arm/mach-iop3xx/iq80332-pci.c
@@ -13,6 +13,8 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <linux/string.h>
+#include <linux/slab.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
diff --git a/arch/arm/mach-ixp2000/Makefile b/arch/arm/mach-ixp2000/Makefile
index 1e6139d42a92..9621aeb61f46 100644
--- a/arch/arm/mach-ixp2000/Makefile
+++ b/arch/arm/mach-ixp2000/Makefile
@@ -1,7 +1,7 @@
 #
 # Makefile for the linux kernel.
 #
-obj-y			:= core.o pci.o
+obj-y			:= core.o pci.o uengine.o
 obj-m			:=
 obj-n			:=
 obj-			:=
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index 74bd2fd602d4..6851abaf5524 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-ixp2000/common.c
+ * arch/arm/mach-ixp2000/core.c
  *
  * Common routines used by all IXP2400/2800 based platforms.
  *
@@ -30,7 +30,6 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/hardware.h>
-#include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/tlbflush.h>
@@ -50,7 +49,6 @@ static unsigned long ixp2000_slowport_irq_flags;
  *************************************************************************/
 void ixp2000_acquire_slowport(struct slowport_cfg *new_cfg, struct slowport_cfg *old_cfg)
 {
-
 	spin_lock_irqsave(&ixp2000_slowport_lock, ixp2000_slowport_irq_flags);
 
 	old_cfg->CCR = *IXP2000_SLOWPORT_CCR;
@@ -63,7 +61,7 @@ void ixp2000_acquire_slowport(struct slowport_cfg *new_cfg, struct slowport_cfg
 	ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, new_cfg->WTC);
 	ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, new_cfg->RTC);
 	ixp2000_reg_write(IXP2000_SLOWPORT_PCR, new_cfg->PCR);
-	ixp2000_reg_write(IXP2000_SLOWPORT_ADC, new_cfg->ADC);
+	ixp2000_reg_wrb(IXP2000_SLOWPORT_ADC, new_cfg->ADC);
 }
 
 void ixp2000_release_slowport(struct slowport_cfg *old_cfg)
@@ -72,7 +70,7 @@ void ixp2000_release_slowport(struct slowport_cfg *old_cfg)
 	ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, old_cfg->WTC);
 	ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, old_cfg->RTC);
 	ixp2000_reg_write(IXP2000_SLOWPORT_PCR, old_cfg->PCR);
-	ixp2000_reg_write(IXP2000_SLOWPORT_ADC, old_cfg->ADC);
+	ixp2000_reg_wrb(IXP2000_SLOWPORT_ADC, old_cfg->ADC);
 
 	spin_unlock_irqrestore(&ixp2000_slowport_lock, 
 					ixp2000_slowport_irq_flags);
@@ -84,69 +82,60 @@ void ixp2000_release_slowport(struct slowport_cfg *old_cfg)
 static struct map_desc ixp2000_io_desc[] __initdata = {
 	{
 		.virtual	= IXP2000_CAP_VIRT_BASE,
-		.physical	= IXP2000_CAP_PHYS_BASE,
+		.pfn		= __phys_to_pfn(IXP2000_CAP_PHYS_BASE),
 		.length		= IXP2000_CAP_SIZE,
-		.type		= MT_DEVICE
+		.type		= MT_IXP2000_DEVICE,
 	}, {
 		.virtual	= IXP2000_INTCTL_VIRT_BASE,
-		.physical	= IXP2000_INTCTL_PHYS_BASE,
+		.pfn		= __phys_to_pfn(IXP2000_INTCTL_PHYS_BASE),
 		.length		= IXP2000_INTCTL_SIZE,
-		.type		= MT_DEVICE
+		.type		= MT_IXP2000_DEVICE,
 	}, {
 		.virtual	= IXP2000_PCI_CREG_VIRT_BASE,
-		.physical	= IXP2000_PCI_CREG_PHYS_BASE,
+		.pfn		= __phys_to_pfn(IXP2000_PCI_CREG_PHYS_BASE),
 		.length		= IXP2000_PCI_CREG_SIZE,
-		.type		= MT_DEVICE
+		.type		= MT_IXP2000_DEVICE,
 	}, {
 		.virtual	= IXP2000_PCI_CSR_VIRT_BASE,
-		.physical	= IXP2000_PCI_CSR_PHYS_BASE,
+		.pfn		= __phys_to_pfn(IXP2000_PCI_CSR_PHYS_BASE),
 		.length		= IXP2000_PCI_CSR_SIZE,
-		.type		= MT_DEVICE
+		.type		= MT_IXP2000_DEVICE,
 	}, {
 		.virtual	= IXP2000_MSF_VIRT_BASE,
-		.physical	= IXP2000_MSF_PHYS_BASE,
+		.pfn		= __phys_to_pfn(IXP2000_MSF_PHYS_BASE),
 		.length		= IXP2000_MSF_SIZE,
-		.type		= MT_DEVICE
+		.type		= MT_IXP2000_DEVICE,
 	}, {
 		.virtual	= IXP2000_PCI_IO_VIRT_BASE,
-		.physical	= IXP2000_PCI_IO_PHYS_BASE,
+		.pfn		= __phys_to_pfn(IXP2000_PCI_IO_PHYS_BASE),
 		.length		= IXP2000_PCI_IO_SIZE,
-		.type		= MT_DEVICE
+		.type		= MT_IXP2000_DEVICE,
 	}, {
 		.virtual	= IXP2000_PCI_CFG0_VIRT_BASE,
-		.physical	= IXP2000_PCI_CFG0_PHYS_BASE,
+		.pfn		= __phys_to_pfn(IXP2000_PCI_CFG0_PHYS_BASE),
 		.length		= IXP2000_PCI_CFG0_SIZE,
-		.type		= MT_DEVICE
+		.type		= MT_IXP2000_DEVICE,
 	}, {
 		.virtual	= IXP2000_PCI_CFG1_VIRT_BASE,
-		.physical	= IXP2000_PCI_CFG1_PHYS_BASE,
+		.pfn		= __phys_to_pfn(IXP2000_PCI_CFG1_PHYS_BASE),
 		.length		= IXP2000_PCI_CFG1_SIZE,
-		.type		= MT_DEVICE
+		.type		= MT_IXP2000_DEVICE,
 	}
 };
 
 void __init ixp2000_map_io(void)
 {
-	extern unsigned int processor_id;
-
 	/*
-	 * On IXP2400 CPUs we need to use MT_IXP2000_DEVICE for
-	 * tweaking the PMDs so XCB=101. On IXP2800s we use the normal
-	 * PMD flags.
+	 * On IXP2400 CPUs we need to use MT_IXP2000_DEVICE so that
+	 * XCB=101 (to avoid triggering erratum #66), and given that
+	 * this mode speeds up I/O accesses and we have write buffer
+	 * flushes in the right places anyway, it doesn't hurt to use
+	 * XCB=101 for all IXP2000s.
 	 */
-	if ((processor_id & 0xfffffff0) == 0x69054190) {
-		int i;
-
-		printk(KERN_INFO "Enabling IXP2400 erratum #66 workaround\n");
-
-		for(i=0;i<ARRAY_SIZE(ixp2000_io_desc);i++)
-			ixp2000_io_desc[i].type = MT_IXP2000_DEVICE;
-	}
-
 	iotable_init(ixp2000_io_desc, ARRAY_SIZE(ixp2000_io_desc));
 
 	/* Set slowport to 8-bit mode.  */
-	ixp2000_reg_write(IXP2000_SLOWPORT_FRM, 1);
+	ixp2000_reg_wrb(IXP2000_SLOWPORT_FRM, 1);
 }
 
 
@@ -168,7 +157,7 @@ static struct plat_serial8250_port ixp2000_serial_port[] = {
 
 static struct resource ixp2000_uart_resource = {
 	.start		= IXP2000_UART_PHYS_BASE,
-	.end		= IXP2000_UART_PHYS_BASE + 0xffff,
+	.end		= IXP2000_UART_PHYS_BASE + 0x1f,
 	.flags		= IORESOURCE_MEM,
 };
 
@@ -210,7 +199,7 @@ static int ixp2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 	write_seqlock(&xtime_lock);
 
 	/* clear timer 1 */
-	ixp2000_reg_write(IXP2000_T1_CLR, 1);
+	ixp2000_reg_wrb(IXP2000_T1_CLR, 1);
 
 	while ((next_jiffy_time - *missing_jiffy_timer_csr) > ticks_per_jiffy) {
 		timer_tick(regs);
@@ -253,12 +242,12 @@ void __init ixp2000_init_time(unsigned long tick_rate)
 
 		ixp2000_reg_write(IXP2000_T4_CLR, 0);
 		ixp2000_reg_write(IXP2000_T4_CLD, -1);
-		ixp2000_reg_write(IXP2000_T4_CTL, (1 << 7));
+		ixp2000_reg_wrb(IXP2000_T4_CTL, (1 << 7));
 		missing_jiffy_timer_csr = IXP2000_T4_CSR;
 	} else {
 		ixp2000_reg_write(IXP2000_T2_CLR, 0);
 		ixp2000_reg_write(IXP2000_T2_CLD, -1);
-		ixp2000_reg_write(IXP2000_T2_CTL, (1 << 7));
+		ixp2000_reg_wrb(IXP2000_T2_CTL, (1 << 7));
 		missing_jiffy_timer_csr = IXP2000_T2_CSR;
 	}
  	next_jiffy_time = 0xffffffff;
@@ -280,7 +269,7 @@ static void update_gpio_int_csrs(void)
 	ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge);
 	ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge);
 	ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low);
-	ixp2000_reg_write(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high);
+	ixp2000_reg_wrb(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high);
 }
 
 void gpio_line_config(int line, int direction)
@@ -298,9 +287,9 @@ void gpio_line_config(int line, int direction)
 		GPIO_IRQ_level_high &= ~(1 << line);
 		update_gpio_int_csrs();
 
-		ixp2000_reg_write(IXP2000_GPIO_PDSR, 1 << line);
+		ixp2000_reg_wrb(IXP2000_GPIO_PDSR, 1 << line);
 	} else if (direction == GPIO_IN) {
-		ixp2000_reg_write(IXP2000_GPIO_PDCR, 1 << line);
+		ixp2000_reg_wrb(IXP2000_GPIO_PDCR, 1 << line);
 	}
 	local_irq_restore(flags);
 }
@@ -366,12 +355,12 @@ static void ixp2000_GPIO_irq_mask_ack(unsigned int irq)
 
 	ixp2000_reg_write(IXP2000_GPIO_EDSR, (1 << (irq - IRQ_IXP2000_GPIO0)));
 	ixp2000_reg_write(IXP2000_GPIO_LDSR, (1 << (irq - IRQ_IXP2000_GPIO0)));
-	ixp2000_reg_write(IXP2000_GPIO_INST, (1 << (irq - IRQ_IXP2000_GPIO0)));
+	ixp2000_reg_wrb(IXP2000_GPIO_INST, (1 << (irq - IRQ_IXP2000_GPIO0)));
 }
 
 static void ixp2000_GPIO_irq_mask(unsigned int irq)
 {
-	ixp2000_reg_write(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0)));
+	ixp2000_reg_wrb(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0)));
 }
 
 static void ixp2000_GPIO_irq_unmask(unsigned int irq)
@@ -390,9 +379,9 @@ static void ixp2000_pci_irq_mask(unsigned int irq)
 {
 	unsigned long temp = *IXP2000_PCI_XSCALE_INT_ENABLE;
 	if (irq == IRQ_IXP2000_PCIA)
-		ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 26)));
+		ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 26)));
 	else if (irq == IRQ_IXP2000_PCIB)
-		ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 27)));
+		ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 27)));
 }
 
 static void ixp2000_pci_irq_unmask(unsigned int irq)
@@ -404,6 +393,40 @@ static void ixp2000_pci_irq_unmask(unsigned int irq)
 		ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp | (1 << 27)));
 }
 
+/*
+ * Error interrupts. These are used extensively by the microengine drivers
+ */
+static void ixp2000_err_irq_handler(unsigned int irq, struct irqdesc *desc,  struct pt_regs *regs)
+{
+	int i;
+	unsigned long status = *IXP2000_IRQ_ERR_STATUS;
+
+	for(i = 31; i >= 0; i--) {
+		if(status & (1 << i)) {
+			desc = irq_desc + IRQ_IXP2000_DRAM0_MIN_ERR + i;
+			desc->handle(IRQ_IXP2000_DRAM0_MIN_ERR + i, desc, regs);
+		}
+	}
+}
+
+static void ixp2000_err_irq_mask(unsigned int irq)
+{
+	ixp2000_reg_write(IXP2000_IRQ_ERR_ENABLE_CLR,
+			(1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)));
+}
+
+static void ixp2000_err_irq_unmask(unsigned int irq)
+{
+	ixp2000_reg_write(IXP2000_IRQ_ERR_ENABLE_SET,
+			(1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)));
+}
+
+static struct irqchip ixp2000_err_irq_chip = {
+	.ack	= ixp2000_err_irq_mask,
+	.mask	= ixp2000_err_irq_mask,
+	.unmask	= ixp2000_err_irq_unmask
+};
+
 static struct irqchip ixp2000_pci_irq_chip = {
 	.ack	= ixp2000_pci_irq_mask,
 	.mask	= ixp2000_pci_irq_mask,
@@ -412,7 +435,7 @@ static struct irqchip ixp2000_pci_irq_chip = {
 
 static void ixp2000_irq_mask(unsigned int irq)
 {
-	ixp2000_reg_write(IXP2000_IRQ_ENABLE_CLR, (1 << irq));
+	ixp2000_reg_wrb(IXP2000_IRQ_ENABLE_CLR, (1 << irq));
 }
 
 static void ixp2000_irq_unmask(unsigned int irq)
@@ -444,7 +467,7 @@ void __init ixp2000_init_irq(void)
 	ixp2000_reg_write(IXP2000_GPIO_INCR, -1);
 
 	/* clear PCI interrupt sources */
-	ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, 0);
+	ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, 0);
 
 	/*
 	 * Certain bits in the IRQ status register of the 
@@ -461,6 +484,18 @@ void __init ixp2000_init_irq(void)
 		} else set_irq_flags(irq, 0);
 	}
 
+	for (irq = IRQ_IXP2000_DRAM0_MIN_ERR; irq <= IRQ_IXP2000_SP_INT; irq++) {
+		if((1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)) &
+				IXP2000_VALID_ERR_IRQ_MASK) {
+			set_irq_chip(irq, &ixp2000_err_irq_chip);
+			set_irq_handler(irq, do_level_IRQ);
+			set_irq_flags(irq, IRQF_VALID);
+		}
+		else
+			set_irq_flags(irq, 0);
+	}
+	set_irq_chained_handler(IRQ_IXP2000_ERRSUM, ixp2000_err_irq_handler);
+
 	/*
 	 * GPIO IRQs are invalid until someone sets the interrupt mode
 	 * by calling set_irq_type().
diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c
index 9aa54de44740..61f6006241bd 100644
--- a/arch/arm/mach-ixp2000/enp2611.c
+++ b/arch/arm/mach-ixp2000/enp2611.c
@@ -32,7 +32,7 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_core.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -64,6 +64,35 @@ static struct sys_timer enp2611_timer = {
 
 
 /*************************************************************************
+ * ENP-2611 I/O
+ *************************************************************************/
+static struct map_desc enp2611_io_desc[] __initdata = {
+	{
+		.virtual	= ENP2611_CALEB_VIRT_BASE,
+		.pfn		= __phys_to_pfn(ENP2611_CALEB_PHYS_BASE),
+		.length		= ENP2611_CALEB_SIZE,
+		.type		= MT_IXP2000_DEVICE,
+	}, {
+		.virtual	= ENP2611_PM3386_0_VIRT_BASE,
+		.pfn		= __phys_to_pfn(ENP2611_PM3386_0_PHYS_BASE),
+		.length		= ENP2611_PM3386_0_SIZE,
+		.type		= MT_IXP2000_DEVICE,
+	}, {
+		.virtual	= ENP2611_PM3386_1_VIRT_BASE,
+		.pfn		= __phys_to_pfn(ENP2611_PM3386_1_PHYS_BASE),
+		.length		= ENP2611_PM3386_1_SIZE,
+		.type		= MT_IXP2000_DEVICE,
+	}
+};
+
+void __init enp2611_map_io(void)
+{
+	ixp2000_map_io();
+	iotable_init(enp2611_io_desc, ARRAY_SIZE(enp2611_io_desc));
+}
+
+
+/*************************************************************************
  * ENP-2611 PCI
  *************************************************************************/
 static int enp2611_pci_setup(int nr, struct pci_sys_data *sys)
@@ -229,7 +258,7 @@ MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board")
 	.phys_io	= IXP2000_UART_PHYS_BASE,
 	.io_pg_offst	= ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
-	.map_io		= ixp2000_map_io,
+	.map_io		= enp2611_map_io,
 	.init_irq	= ixp2000_init_irq,
 	.timer		= &enp2611_timer,
 	.init_machine	= enp2611_init_machine,
diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c
index 63ba0191aa65..d628da56b4bc 100644
--- a/arch/arm/mach-ixp2000/ixdp2x00.c
+++ b/arch/arm/mach-ixp2000/ixdp2x00.c
@@ -20,7 +20,7 @@
 #include <linux/mm.h>
 #include <linux/sched.h>
 #include <linux/interrupt.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/bitops.h>
 #include <linux/pci.h>
 #include <linux/ioport.h>
@@ -81,7 +81,7 @@ static void ixdp2x00_irq_mask(unsigned int irq)
 
 	dummy = *board_irq_mask;
 	dummy |=  IXP2000_BOARD_IRQ_MASK(irq);
-	ixp2000_reg_write(board_irq_mask, dummy);
+	ixp2000_reg_wrb(board_irq_mask, dummy);
 
 #ifdef CONFIG_ARCH_IXDP2400
 	if (machine_is_ixdp2400())
@@ -101,7 +101,7 @@ static void ixdp2x00_irq_unmask(unsigned int irq)
 
 	dummy = *board_irq_mask;
 	dummy &=  ~IXP2000_BOARD_IRQ_MASK(irq);
-	ixp2000_reg_write(board_irq_mask, dummy);
+	ixp2000_reg_wrb(board_irq_mask, dummy);
 
 	if (machine_is_ixdp2400()) 
 		ixp2000_release_slowport(&old_cfg);
@@ -176,7 +176,7 @@ void ixdp2x00_init_irq(volatile unsigned long *stat_reg, volatile unsigned long
  *************************************************************************/
 static struct map_desc ixdp2x00_io_desc __initdata = {
 	.virtual	= IXDP2X00_VIRT_CPLD_BASE, 
-	.physical	= IXDP2X00_PHYS_CPLD_BASE,
+	.pfn		= __phys_to_pfn(IXDP2X00_PHYS_CPLD_BASE),
 	.length		= IXDP2X00_CPLD_SIZE,
 	.type		= MT_DEVICE
 };
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index 7a5109921287..e6a882f35da2 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -29,7 +29,7 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_core.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -51,7 +51,7 @@
  *************************************************************************/
 static void ixdp2x01_irq_mask(unsigned int irq)
 {
-	ixp2000_reg_write(IXDP2X01_INT_MASK_SET_REG,
+	ixp2000_reg_wrb(IXDP2X01_INT_MASK_SET_REG,
 				IXP2000_BOARD_IRQ_MASK(irq));
 }
 
@@ -114,7 +114,7 @@ void __init ixdp2x01_init_irq(void)
 
 	/* Mask all interrupts from CPLD, disable simulation */
 	ixp2000_reg_write(IXDP2X01_INT_MASK_SET_REG, 0xffffffff);
-	ixp2000_reg_write(IXDP2X01_INT_SIM_REG, 0);
+	ixp2000_reg_wrb(IXDP2X01_INT_SIM_REG, 0);
 
 	for (irq = NR_IXP2000_IRQS; irq < NR_IXDP2X01_IRQS; irq++) {
 		if (irq & valid_irq_mask) {
@@ -136,7 +136,7 @@ void __init ixdp2x01_init_irq(void)
  *************************************************************************/
 static struct map_desc ixdp2x01_io_desc __initdata = {
 	.virtual	= IXDP2X01_VIRT_CPLD_BASE, 
-	.physical	= IXDP2X01_PHYS_CPLD_BASE,
+	.pfn		= __phys_to_pfn(IXDP2X01_PHYS_CPLD_BASE),
 	.length		= IXDP2X01_CPLD_REGION_SIZE,
 	.type		= MT_DEVICE
 };
@@ -299,7 +299,6 @@ struct hw_pci ixdp2x01_pci __initdata = {
 
 int __init ixdp2x01_pci_init(void)
 {
-
 	pci_common_init(&ixdp2x01_pci);
 	return 0;
 }
@@ -316,7 +315,7 @@ static struct flash_platform_data ixdp2x01_flash_platform_data = {
 
 static unsigned long ixdp2x01_flash_bank_setup(unsigned long ofs)
 {
-	ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG,
+	ixp2000_reg_wrb(IXDP2X01_CPLD_FLASH_REG,
 		((ofs >> IXDP2X01_FLASH_WINDOW_BITS) | IXDP2X01_CPLD_FLASH_INTERN));
 	return (ofs & IXDP2X01_FLASH_WINDOW_MASK);
 }
@@ -363,7 +362,7 @@ static struct platform_device *ixdp2x01_devices[] __initdata = {
 
 static void __init ixdp2x01_init_machine(void)
 {
-	ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG,
+	ixp2000_reg_wrb(IXDP2X01_CPLD_FLASH_REG,
 		(IXDP2X01_CPLD_FLASH_BANK_MASK | IXDP2X01_CPLD_FLASH_INTERN));
 	
 	ixdp2x01_flash_data.nr_banks =
diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c
index 0788fb2b5c10..d4bf1e1c0031 100644
--- a/arch/arm/mach-ixp2000/pci.c
+++ b/arch/arm/mach-ixp2000/pci.c
@@ -28,7 +28,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
-#include <asm/mach-types.h>
 #include <asm/hardware.h>
 
 #include <asm/mach/pci.h>
@@ -149,7 +148,7 @@ int ixp2000_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_re
 	local_irq_save(flags);
 	temp = *(IXP2000_PCI_CONTROL);
 	if (temp & ((1 << 8) | (1 << 5))) {
-		ixp2000_reg_write(IXP2000_PCI_CONTROL, temp);
+		ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp);
 	}
 
 	temp = *(IXP2000_PCI_CMDSTAT);
@@ -179,8 +178,8 @@ clear_master_aborts(void)
 
 	local_irq_save(flags);
 	temp = *(IXP2000_PCI_CONTROL);
-	if (temp & ((1 << 8) | (1 << 5))) {	
-		ixp2000_reg_write(IXP2000_PCI_CONTROL, temp);
+	if (temp & ((1 << 8) | (1 << 5))) {
+		ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp);
 	}
 
 	temp = *(IXP2000_PCI_CMDSTAT);
diff --git a/arch/arm/mach-ixp2000/uengine.c b/arch/arm/mach-ixp2000/uengine.c
new file mode 100644
index 000000000000..ec4e007a22ef
--- /dev/null
+++ b/arch/arm/mach-ixp2000/uengine.c
@@ -0,0 +1,473 @@
+/*
+ * Generic library functions for the microengines found on the Intel
+ * IXP2000 series of network processors.
+ *
+ * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Dedicated to Marija Kulikova.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as
+ * published by the Free Software Foundation; either version 2.1 of the
+ * License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <asm/hardware.h>
+#include <asm/arch/ixp2000-regs.h>
+#include <asm/arch/uengine.h>
+#include <asm/io.h>
+
+#define USTORE_ADDRESS			0x000
+#define USTORE_DATA_LOWER		0x004
+#define USTORE_DATA_UPPER		0x008
+#define CTX_ENABLES			0x018
+#define CC_ENABLE			0x01c
+#define CSR_CTX_POINTER			0x020
+#define INDIRECT_CTX_STS		0x040
+#define ACTIVE_CTX_STS			0x044
+#define INDIRECT_CTX_SIG_EVENTS		0x048
+#define INDIRECT_CTX_WAKEUP_EVENTS	0x050
+#define NN_PUT				0x080
+#define NN_GET				0x084
+#define TIMESTAMP_LOW			0x0c0
+#define TIMESTAMP_HIGH			0x0c4
+#define T_INDEX_BYTE_INDEX		0x0f4
+#define LOCAL_CSR_STATUS		0x180
+
+u32 ixp2000_uengine_mask;
+
+static void *ixp2000_uengine_csr_area(int uengine)
+{
+	return ((void *)IXP2000_UENGINE_CSR_VIRT_BASE) + (uengine << 10);
+}
+
+/*
+ * LOCAL_CSR_STATUS=1 after a read or write to a microengine's CSR
+ * space means that the microengine we tried to access was also trying
+ * to access its own CSR space on the same clock cycle as we did.  When
+ * this happens, we lose the arbitration process by default, and the
+ * read or write we tried to do was not actually performed, so we try
+ * again until it succeeds.
+ */
+u32 ixp2000_uengine_csr_read(int uengine, int offset)
+{
+	void *uebase;
+	u32 *local_csr_status;
+	u32 *reg;
+	u32 value;
+
+	uebase = ixp2000_uengine_csr_area(uengine);
+
+	local_csr_status = (u32 *)(uebase + LOCAL_CSR_STATUS);
+	reg = (u32 *)(uebase + offset);
+	do {
+		value = ixp2000_reg_read(reg);
+	} while (ixp2000_reg_read(local_csr_status) & 1);
+
+	return value;
+}
+EXPORT_SYMBOL(ixp2000_uengine_csr_read);
+
+void ixp2000_uengine_csr_write(int uengine, int offset, u32 value)
+{
+	void *uebase;
+	u32 *local_csr_status;
+	u32 *reg;
+
+	uebase = ixp2000_uengine_csr_area(uengine);
+
+	local_csr_status = (u32 *)(uebase + LOCAL_CSR_STATUS);
+	reg = (u32 *)(uebase + offset);
+	do {
+		ixp2000_reg_write(reg, value);
+	} while (ixp2000_reg_read(local_csr_status) & 1);
+}
+EXPORT_SYMBOL(ixp2000_uengine_csr_write);
+
+void ixp2000_uengine_reset(u32 uengine_mask)
+{
+	ixp2000_reg_wrb(IXP2000_RESET1, uengine_mask & ixp2000_uengine_mask);
+	ixp2000_reg_wrb(IXP2000_RESET1, 0);
+}
+EXPORT_SYMBOL(ixp2000_uengine_reset);
+
+void ixp2000_uengine_set_mode(int uengine, u32 mode)
+{
+	/*
+	 * CTL_STR_PAR_EN: unconditionally enable parity checking on
+	 * control store.
+	 */
+	mode |= 0x10000000;
+	ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mode);
+
+	/*
+	 * Enable updating of condition codes.
+	 */
+	ixp2000_uengine_csr_write(uengine, CC_ENABLE, 0x00002000);
+
+	/*
+	 * Initialise other per-microengine registers.
+	 */
+	ixp2000_uengine_csr_write(uengine, NN_PUT, 0x00);
+	ixp2000_uengine_csr_write(uengine, NN_GET, 0x00);
+	ixp2000_uengine_csr_write(uengine, T_INDEX_BYTE_INDEX, 0);
+}
+EXPORT_SYMBOL(ixp2000_uengine_set_mode);
+
+static int make_even_parity(u32 x)
+{
+	return hweight32(x) & 1;
+}
+
+static void ustore_write(int uengine, u64 insn)
+{
+	/*
+	 * Generate even parity for top and bottom 20 bits.
+	 */
+	insn |= (u64)make_even_parity((insn >> 20) & 0x000fffff) << 41;
+	insn |= (u64)make_even_parity(insn & 0x000fffff) << 40;
+
+	/*
+	 * Write to microstore.  The second write auto-increments
+	 * the USTORE_ADDRESS index register.
+	 */
+	ixp2000_uengine_csr_write(uengine, USTORE_DATA_LOWER, (u32)insn);
+	ixp2000_uengine_csr_write(uengine, USTORE_DATA_UPPER, (u32)(insn >> 32));
+}
+
+void ixp2000_uengine_load_microcode(int uengine, u8 *ucode, int insns)
+{
+	int i;
+
+	/*
+	 * Start writing to microstore at address 0.
+	 */
+	ixp2000_uengine_csr_write(uengine, USTORE_ADDRESS, 0x80000000);
+	for (i = 0; i < insns; i++) {
+		u64 insn;
+
+		insn = (((u64)ucode[0]) << 32) |
+			(((u64)ucode[1]) << 24) |
+			(((u64)ucode[2]) << 16) |
+			(((u64)ucode[3]) << 8) |
+			((u64)ucode[4]);
+		ucode += 5;
+
+		ustore_write(uengine, insn);
+	}
+
+	/*
+ 	 * Pad with a few NOPs at the end (to avoid the microengine
+	 * aborting as it prefetches beyond the last instruction), unless
+	 * we run off the end of the instruction store first, at which
+	 * point the address register will wrap back to zero.
+	 */
+	for (i = 0; i < 4; i++) {
+		u32 addr;
+
+		addr = ixp2000_uengine_csr_read(uengine, USTORE_ADDRESS);
+		if (addr == 0x80000000)
+			break;
+		ustore_write(uengine, 0xf0000c0300ULL);
+	}
+
+	/*
+	 * End programming.
+	 */
+	ixp2000_uengine_csr_write(uengine, USTORE_ADDRESS, 0x00000000);
+}
+EXPORT_SYMBOL(ixp2000_uengine_load_microcode);
+
+void ixp2000_uengine_init_context(int uengine, int context, int pc)
+{
+	/*
+	 * Select the right context for indirect access.
+	 */
+	ixp2000_uengine_csr_write(uengine, CSR_CTX_POINTER, context);
+
+	/*
+	 * Initialise signal masks to immediately go to Ready state.
+	 */
+	ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_SIG_EVENTS, 1);
+	ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_WAKEUP_EVENTS, 1);
+
+	/*
+	 * Set program counter.
+	 */
+	ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_STS, pc);
+}
+EXPORT_SYMBOL(ixp2000_uengine_init_context);
+
+void ixp2000_uengine_start_contexts(int uengine, u8 ctx_mask)
+{
+	u32 mask;
+
+	/*
+	 * Enable the specified context to go to Executing state.
+	 */
+	mask = ixp2000_uengine_csr_read(uengine, CTX_ENABLES);
+	mask |= ctx_mask << 8;
+	ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mask);
+}
+EXPORT_SYMBOL(ixp2000_uengine_start_contexts);
+
+void ixp2000_uengine_stop_contexts(int uengine, u8 ctx_mask)
+{
+	u32 mask;
+
+	/*
+	 * Disable the Ready->Executing transition.  Note that this
+	 * does not stop the context until it voluntarily yields.
+	 */
+	mask = ixp2000_uengine_csr_read(uengine, CTX_ENABLES);
+	mask &= ~(ctx_mask << 8);
+	ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mask);
+}
+EXPORT_SYMBOL(ixp2000_uengine_stop_contexts);
+
+static int check_ixp_type(struct ixp2000_uengine_code *c)
+{
+	u32 product_id;
+	u32 rev;
+
+	product_id = ixp2000_reg_read(IXP2000_PRODUCT_ID);
+	if (((product_id >> 16) & 0x1f) != 0)
+		return 0;
+
+	switch ((product_id >> 8) & 0xff) {
+	case 0:		/* IXP2800 */
+		if (!(c->cpu_model_bitmask & 4))
+			return 0;
+		break;
+
+	case 1:		/* IXP2850 */
+		if (!(c->cpu_model_bitmask & 8))
+			return 0;
+		break;
+
+	case 2:		/* IXP2400 */
+		if (!(c->cpu_model_bitmask & 2))
+			return 0;
+		break;
+
+	default:
+		return 0;
+	}
+
+	rev = product_id & 0xff;
+	if (rev < c->cpu_min_revision || rev > c->cpu_max_revision)
+		return 0;
+
+	return 1;
+}
+
+static void generate_ucode(u8 *ucode, u32 *gpr_a, u32 *gpr_b)
+{
+	int offset;
+	int i;
+
+	offset = 0;
+
+	for (i = 0; i < 128; i++) {
+		u8 b3;
+		u8 b2;
+		u8 b1;
+		u8 b0;
+
+		b3 = (gpr_a[i] >> 24) & 0xff;
+		b2 = (gpr_a[i] >> 16) & 0xff;
+		b1 = (gpr_a[i] >> 8) & 0xff;
+		b0 = gpr_a[i] & 0xff;
+
+		// immed[@ai, (b1 << 8) | b0]
+		// 11110000 0000VVVV VVVV11VV VVVVVV00 1IIIIIII
+		ucode[offset++] = 0xf0;
+		ucode[offset++] = (b1 >> 4);
+		ucode[offset++] = (b1 << 4) | 0x0c | (b0 >> 6);
+		ucode[offset++] = (b0 << 2);
+		ucode[offset++] = 0x80 | i;
+
+		// immed_w1[@ai, (b3 << 8) | b2]
+		// 11110100 0100VVVV VVVV11VV VVVVVV00 1IIIIIII
+		ucode[offset++] = 0xf4;
+		ucode[offset++] = 0x40 | (b3 >> 4);
+		ucode[offset++] = (b3 << 4) | 0x0c | (b2 >> 6);
+		ucode[offset++] = (b2 << 2);
+		ucode[offset++] = 0x80 | i;
+	}
+
+	for (i = 0; i < 128; i++) {
+		u8 b3;
+		u8 b2;
+		u8 b1;
+		u8 b0;
+
+		b3 = (gpr_b[i] >> 24) & 0xff;
+		b2 = (gpr_b[i] >> 16) & 0xff;
+		b1 = (gpr_b[i] >> 8) & 0xff;
+		b0 = gpr_b[i] & 0xff;
+
+		// immed[@bi, (b1 << 8) | b0]
+		// 11110000 0000VVVV VVVV001I IIIIII11 VVVVVVVV
+		ucode[offset++] = 0xf0;
+		ucode[offset++] = (b1 >> 4);
+		ucode[offset++] = (b1 << 4) | 0x02 | (i >> 6);
+		ucode[offset++] = (i << 2) | 0x03;
+		ucode[offset++] = b0;
+
+		// immed_w1[@bi, (b3 << 8) | b2]
+		// 11110100 0100VVVV VVVV001I IIIIII11 VVVVVVVV
+		ucode[offset++] = 0xf4;
+		ucode[offset++] = 0x40 | (b3 >> 4);
+		ucode[offset++] = (b3 << 4) | 0x02 | (i >> 6);
+		ucode[offset++] = (i << 2) | 0x03;
+		ucode[offset++] = b2;
+	}
+
+	// ctx_arb[kill]
+	ucode[offset++] = 0xe0;
+	ucode[offset++] = 0x00;
+	ucode[offset++] = 0x01;
+	ucode[offset++] = 0x00;
+	ucode[offset++] = 0x00;
+}
+
+static int set_initial_registers(int uengine, struct ixp2000_uengine_code *c)
+{
+	int per_ctx_regs;
+	u32 *gpr_a;
+	u32 *gpr_b;
+	u8 *ucode;
+	int i;
+
+	gpr_a = kmalloc(128 * sizeof(u32), GFP_KERNEL);
+	gpr_b = kmalloc(128 * sizeof(u32), GFP_KERNEL);
+	ucode = kmalloc(513 * 5, GFP_KERNEL);
+	if (gpr_a == NULL || gpr_b == NULL || ucode == NULL) {
+		kfree(ucode);
+		kfree(gpr_b);
+		kfree(gpr_a);
+		return 1;
+	}
+
+	per_ctx_regs = 16;
+	if (c->uengine_parameters & IXP2000_UENGINE_4_CONTEXTS)
+		per_ctx_regs = 32;
+
+	memset(gpr_a, 0, sizeof(gpr_a));
+	memset(gpr_b, 0, sizeof(gpr_b));
+	for (i = 0; i < 256; i++) {
+		struct ixp2000_reg_value *r = c->initial_reg_values + i;
+		u32 *bank;
+		int inc;
+		int j;
+
+		if (r->reg == -1)
+			break;
+
+		bank = (r->reg & 0x400) ? gpr_b : gpr_a;
+		inc = (r->reg & 0x80) ? 128 : per_ctx_regs;
+
+		j = r->reg & 0x7f;
+		while (j < 128) {
+			bank[j] = r->value;
+			j += inc;
+		}
+	}
+
+	generate_ucode(ucode, gpr_a, gpr_b);
+	ixp2000_uengine_load_microcode(uengine, ucode, 513);
+	ixp2000_uengine_init_context(uengine, 0, 0);
+	ixp2000_uengine_start_contexts(uengine, 0x01);
+	for (i = 0; i < 100; i++) {
+		u32 status;
+
+		status = ixp2000_uengine_csr_read(uengine, ACTIVE_CTX_STS);
+		if (!(status & 0x80000000))
+			break;
+	}
+	ixp2000_uengine_stop_contexts(uengine, 0x01);
+
+	kfree(ucode);
+	kfree(gpr_b);
+	kfree(gpr_a);
+
+	return !!(i == 100);
+}
+
+int ixp2000_uengine_load(int uengine, struct ixp2000_uengine_code *c)
+{
+	int ctx;
+
+	if (!check_ixp_type(c))
+		return 1;
+
+	if (!(ixp2000_uengine_mask & (1 << uengine)))
+		return 1;
+
+	ixp2000_uengine_reset(1 << uengine);
+	ixp2000_uengine_set_mode(uengine, c->uengine_parameters);
+	if (set_initial_registers(uengine, c))
+		return 1;
+	ixp2000_uengine_load_microcode(uengine, c->insns, c->num_insns);
+
+	for (ctx = 0; ctx < 8; ctx++)
+		ixp2000_uengine_init_context(uengine, ctx, 0);
+
+	return 0;
+}
+EXPORT_SYMBOL(ixp2000_uengine_load);
+
+
+static int __init ixp2000_uengine_init(void)
+{
+	int uengine;
+	u32 value;
+
+	/*
+	 * Determine number of microengines present.
+	 */
+	switch ((ixp2000_reg_read(IXP2000_PRODUCT_ID) >> 8) & 0x1fff) {
+	case 0:		/* IXP2800 */
+	case 1:		/* IXP2850 */
+		ixp2000_uengine_mask = 0x00ff00ff;
+		break;
+
+	case 2:		/* IXP2400 */
+		ixp2000_uengine_mask = 0x000f000f;
+		break;
+
+	default:
+		printk(KERN_INFO "Detected unknown IXP2000 model (%.8x)\n",
+			(unsigned int)ixp2000_reg_read(IXP2000_PRODUCT_ID));
+		ixp2000_uengine_mask = 0x00000000;
+		break;
+	}
+
+	/*
+	 * Reset microengines.
+	 */
+	ixp2000_uengine_reset(ixp2000_uengine_mask);
+
+	/*
+	 * Synchronise timestamp counters across all microengines.
+	 */
+	value = ixp2000_reg_read(IXP2000_MISC_CONTROL);
+	ixp2000_reg_wrb(IXP2000_MISC_CONTROL, value & ~0x80);
+	for (uengine = 0; uengine < 32; uengine++) {
+		if (ixp2000_uengine_mask & (1 << uengine)) {
+			ixp2000_uengine_csr_write(uengine, TIMESTAMP_LOW, 0);
+			ixp2000_uengine_csr_write(uengine, TIMESTAMP_HIGH, 0);
+		}
+	}
+	ixp2000_reg_wrb(IXP2000_MISC_CONTROL, value | 0x80);
+
+	return 0;
+}
+
+subsys_initcall(ixp2000_uengine_init);
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 89762a26495c..385285851cb5 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -8,6 +8,16 @@ menu "Intel IXP4xx Implementation Options"
 
 comment "IXP4xx Platforms"
 
+# This entry is placed on top because otherwise it would have
+# been shown as a submenu.
+config MACH_NSLU2
+	bool
+	prompt "NSLU2" if !(MACH_IXDP465 || MACH_IXDPG425 || ARCH_IXDP425 || ARCH_ADI_COYOTE || ARCH_AVILA || ARCH_IXCDP1100 || ARCH_PRPMC1100 || MACH_GTWX5715)
+	help
+	  Say 'Y' here if you want your kernel to support Linksys's
+	  NSLU2 NAS device. For more information on this platform,
+	  see http://www.nslu2-linux.org
+
 config ARCH_AVILA
 	bool "Avila"
 	help
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index ddecbda4a633..7a15629c18d0 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -8,4 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX)	+= ixdp425-pci.o ixdp425-setup.o
 obj-$(CONFIG_MACH_IXDPG425)	+= ixdpg425-pci.o coyote-setup.o
 obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-pci.o coyote-setup.o
 obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-pci.o gtwx5715-setup.o
+obj-$(CONFIG_MACH_NSLU2)	+= nslu2-pci.o nslu2-setup.o nslu2-power.o
 
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index 2b544363c078..9795da270e3a 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -427,7 +427,7 @@ void __init ixp4xx_pci_preinit(void)
 #ifdef __ARMEB__
 	*PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE | PCI_CSR_PDS | PCI_CSR_ADS;
 #else
-	*PCI_CSR = PCI_CSR_IC;
+	*PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE;
 #endif
 
 	pr_debug("DONE\n");
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 52ad11328e96..f3c687cf0071 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -20,6 +20,7 @@
 #include <linux/serial.h>
 #include <linux/sched.h>
 #include <linux/tty.h>
+#include <linux/platform_device.h>
 #include <linux/serial_core.h>
 #include <linux/bootmem.h>
 #include <linux/interrupt.h>
@@ -44,24 +45,24 @@
 static struct map_desc ixp4xx_io_desc[] __initdata = {
 	{	/* UART, Interrupt ctrl, GPIO, timers, NPEs, MACs, USB .... */
 		.virtual	= IXP4XX_PERIPHERAL_BASE_VIRT,
-		.physical	= IXP4XX_PERIPHERAL_BASE_PHYS,
+		.pfn		= __phys_to_pfn(IXP4XX_PERIPHERAL_BASE_PHYS),
 		.length		= IXP4XX_PERIPHERAL_REGION_SIZE,
 		.type		= MT_DEVICE
 	}, {	/* Expansion Bus Config Registers */
 		.virtual	= IXP4XX_EXP_CFG_BASE_VIRT,
-		.physical	= IXP4XX_EXP_CFG_BASE_PHYS,
+		.pfn		= __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS),
 		.length		= IXP4XX_EXP_CFG_REGION_SIZE,
 		.type		= MT_DEVICE
 	}, {	/* PCI Registers */
 		.virtual	= IXP4XX_PCI_CFG_BASE_VIRT,
-		.physical	= IXP4XX_PCI_CFG_BASE_PHYS,
+		.pfn		= __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS),
 		.length		= IXP4XX_PCI_CFG_REGION_SIZE,
 		.type		= MT_DEVICE
 	},
 #ifdef CONFIG_DEBUG_LL
 	{	/* Debug UART mapping */
 		.virtual	= IXP4XX_DEBUG_UART_BASE_VIRT,
-		.physical	= IXP4XX_DEBUG_UART_BASE_PHYS,
+		.pfn		= __phys_to_pfn(IXP4XX_DEBUG_UART_BASE_PHYS),
 		.length		= IXP4XX_DEBUG_UART_REGION_SIZE,
 		.type		= MT_DEVICE
 	}
@@ -125,7 +126,8 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type)
 	} else if (type & IRQT_LOW) {
 		int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW;
 		irq_type = IXP4XX_IRQ_LEVEL;
-	}
+	} else
+		return -EINVAL;
 
 	ixp4xx_config_irq(irq, irq_type);
 
@@ -142,6 +144,8 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type)
 
 	/* Set the new style */
 	*int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE));
+
+	return 0;
 }
 
 static void ixp4xx_irq_mask(unsigned int irq)
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 39b06ed80646..3a22d84e1047 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -85,7 +85,7 @@ static struct plat_serial8250_port ixdp425_uart_data[] = {
 	{
 		.mapbase	= IXP4XX_UART2_BASE_PHYS,
 		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART1,
+		.irq		= IRQ_IXP4XX_UART2,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
@@ -123,7 +123,7 @@ static void __init ixdp425_init(void)
 	platform_add_devices(ixdp425_devices, ARRAY_SIZE(ixdp425_devices));
 }
 
-#ifdef CONFIG_ARCH_IXDP465
+#ifdef CONFIG_ARCH_IXDP425
 MACHINE_START(IXDP425, "Intel IXDP425 Development Platform")
 	/* Maintainer: MontaVista Software, Inc. */
 	.phys_ram	= PHYS_OFFSET,
diff --git a/arch/arm/mach-ixp4xx/nslu2-pci.c b/arch/arm/mach-ixp4xx/nslu2-pci.c
new file mode 100644
index 000000000000..a575f2e0b2c8
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/nslu2-pci.c
@@ -0,0 +1,77 @@
+/*
+ * arch/arm/mach-ixp4xx/nslu2-pci.c
+ *
+ * NSLU2 board-level PCI initialization
+ *
+ * based on ixdp425-pci.c:
+ *	Copyright (C) 2002 Intel Corporation.
+ *	Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * Maintainer: http://www.nslu2-linux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+
+#include <asm/mach/pci.h>
+#include <asm/mach-types.h>
+
+void __init nslu2_pci_preinit(void)
+{
+	set_irq_type(IRQ_NSLU2_PCI_INTA, IRQT_LOW);
+	set_irq_type(IRQ_NSLU2_PCI_INTB, IRQT_LOW);
+	set_irq_type(IRQ_NSLU2_PCI_INTC, IRQT_LOW);
+
+	gpio_line_isr_clear(NSLU2_PCI_INTA_PIN);
+	gpio_line_isr_clear(NSLU2_PCI_INTB_PIN);
+	gpio_line_isr_clear(NSLU2_PCI_INTC_PIN);
+
+	/* INTD is not configured as GPIO is used
+	 * for the power input button.
+	 */
+
+	ixp4xx_pci_preinit();
+}
+
+static int __init nslu2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static int pci_irq_table[NSLU2_PCI_IRQ_LINES] = {
+		IRQ_NSLU2_PCI_INTA,
+		IRQ_NSLU2_PCI_INTB,
+		IRQ_NSLU2_PCI_INTC,
+	};
+
+	int irq = -1;
+
+	if (slot >= 1 && slot <= NSLU2_PCI_MAX_DEV &&
+		pin >= 1 && pin <= NSLU2_PCI_IRQ_LINES) {
+			irq = pci_irq_table[(slot + pin - 2) % NSLU2_PCI_IRQ_LINES];
+	}
+
+	return irq;
+}
+
+struct hw_pci __initdata nslu2_pci = {
+	.nr_controllers = 1,
+	.preinit	= nslu2_pci_preinit,
+	.swizzle	= pci_std_swizzle,
+	.setup		= ixp4xx_setup,
+	.scan		= ixp4xx_scan_bus,
+	.map_irq	= nslu2_map_irq,
+};
+
+int __init nslu2_pci_init(void) /* monkey see, monkey do */
+{
+	if (machine_is_nslu2())
+		pci_common_init(&nslu2_pci);
+
+	return 0;
+}
+
+subsys_initcall(nslu2_pci_init);
diff --git a/arch/arm/mach-ixp4xx/nslu2-power.c b/arch/arm/mach-ixp4xx/nslu2-power.c
new file mode 100644
index 000000000000..18fbc8c0fb30
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/nslu2-power.c
@@ -0,0 +1,92 @@
+/*
+ * arch/arm/mach-ixp4xx/nslu2-power.c
+ *
+ * NSLU2 Power/Reset driver
+ *
+ * Copyright (C) 2005 Tower Technologies
+ *
+ * based on nslu2-io.c
+ *  Copyright (C) 2004 Karen Spearel
+ *
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ * Maintainers: http://www.nslu2-linux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/reboot.h>
+#include <linux/interrupt.h>
+
+#include <asm/mach-types.h>
+
+extern void ctrl_alt_del(void);
+
+static irqreturn_t nslu2_power_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+	/* Signal init to do the ctrlaltdel action, this will bypass init if
+	 * it hasn't started and do a kernel_restart.
+	 */
+	ctrl_alt_del();
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t nslu2_reset_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+	/* This is the paper-clip reset, it shuts the machine down directly.
+	 */
+	machine_power_off();
+
+	return IRQ_HANDLED;
+}
+
+static int __init nslu2_power_init(void)
+{
+	if (!(machine_is_nslu2()))
+		return 0;
+
+	*IXP4XX_GPIO_GPISR = 0x20400000;	/* read the 2 irqs to clr */
+
+	set_irq_type(NSLU2_RB_IRQ, IRQT_LOW);
+	set_irq_type(NSLU2_PB_IRQ, IRQT_HIGH);
+
+	gpio_line_isr_clear(NSLU2_RB_GPIO);
+	gpio_line_isr_clear(NSLU2_PB_GPIO);
+
+	if (request_irq(NSLU2_RB_IRQ, &nslu2_reset_handler,
+		SA_INTERRUPT, "NSLU2 reset button", NULL) < 0) {
+
+		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
+			NSLU2_RB_IRQ);
+
+		return -EIO;
+	}
+
+	if (request_irq(NSLU2_PB_IRQ, &nslu2_power_handler,
+		SA_INTERRUPT, "NSLU2 power button", NULL) < 0) {
+
+		printk(KERN_DEBUG "Power Button IRQ %d not available\n",
+			NSLU2_PB_IRQ);
+
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static void __exit nslu2_power_exit(void)
+{
+	free_irq(NSLU2_RB_IRQ, NULL);
+	free_irq(NSLU2_PB_IRQ, NULL);
+}
+
+module_init(nslu2_power_init);
+module_exit(nslu2_power_exit);
+
+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
+MODULE_DESCRIPTION("NSLU2 Power/Reset driver");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
new file mode 100644
index 000000000000..289e94cb65c2
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -0,0 +1,134 @@
+/*
+ * arch/arm/mach-ixp4xx/nslu2-setup.c
+ *
+ * NSLU2 board-setup
+ *
+ * based ixdp425-setup.c:
+ *      Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * Author: Mark Rakes <mrakes at mac.com>
+ * Maintainers: http://www.nslu2-linux.org/
+ *
+ * Fixed missing init_time in MACHINE_START kas11 10/22/04
+ * Changed to conform to new style __init ixdp425 kas11 10/22/04
+ */
+
+#include <linux/kernel.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct flash_platform_data nslu2_flash_data = {
+	.map_name		= "cfi_probe",
+	.width			= 2,
+};
+
+static struct resource nslu2_flash_resource = {
+	.start			= NSLU2_FLASH_BASE,
+	.end			= NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE,
+	.flags			= IORESOURCE_MEM,
+};
+
+static struct platform_device nslu2_flash = {
+	.name			= "IXP4XX-Flash",
+	.id			= 0,
+	.dev.platform_data	= &nslu2_flash_data,
+	.num_resources		= 1,
+	.resource		= &nslu2_flash_resource,
+};
+
+static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = {
+	.sda_pin		= NSLU2_SDA_PIN,
+	.scl_pin		= NSLU2_SCL_PIN,
+};
+
+static struct platform_device nslu2_i2c_controller = {
+	.name			= "IXP4XX-I2C",
+	.id			= 0,
+	.dev.platform_data	= &nslu2_i2c_gpio_pins,
+	.num_resources		= 0,
+};
+
+static struct resource nslu2_uart_resources[] = {
+	{
+		.start		= IXP4XX_UART1_BASE_PHYS,
+		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= IXP4XX_UART2_BASE_PHYS,
+		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+static struct plat_serial8250_port nslu2_uart_data[] = {
+	{
+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART1,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{
+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART2,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{ }
+};
+
+static struct platform_device nslu2_uart = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev.platform_data	= nslu2_uart_data,
+	.num_resources		= 2,
+	.resource		= nslu2_uart_resources,
+};
+
+static struct platform_device *nslu2_devices[] __initdata = {
+	&nslu2_i2c_controller,
+	&nslu2_flash,
+	&nslu2_uart,
+};
+
+static void nslu2_power_off(void)
+{
+	/* This causes the box to drop the power and go dead. */
+
+	/* enable the pwr cntl gpio */
+	gpio_line_config(NSLU2_PO_GPIO, IXP4XX_GPIO_OUT);
+
+	/* do the deed */
+	gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH);
+}
+
+static void __init nslu2_init(void)
+{
+	ixp4xx_sys_init();
+
+	pm_power_off = nslu2_power_off;
+
+	platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
+}
+
+MACHINE_START(NSLU2, "Linksys NSLU2")
+	/* Maintainer: www.nslu2-linux.org */
+	.phys_ram	= PHYS_OFFSET,
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
+	.boot_params	= 0x00000100,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer          = &ixp4xx_timer,
+	.init_machine	= nslu2_init,
+MACHINE_END
diff --git a/arch/arm/mach-l7200/core.c b/arch/arm/mach-l7200/core.c
index 2a7fee2a7635..03ed742ae2be 100644
--- a/arch/arm/mach-l7200/core.c
+++ b/arch/arm/mach-l7200/core.c
@@ -7,12 +7,17 @@
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/device.h>
 
+#include <asm/types.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
 #include <asm/hardware.h>
 #include <asm/page.h>
 
+#include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/hardware.h>
+#include <asm/mach/irq.h>
 
 /*
  * IRQ base register
@@ -48,6 +53,12 @@ static void l7200_unmask_irq(unsigned int irq)
 {
 	IRQ_ENABLE = 1 << irq;
 }
+
+static struct irqchip l7200_irq_chip = {
+	.ack		= l7200_mask_irq,
+	.mask		= l7200_mask_irq,
+	.unmask		= l7200_unmask_irq
+};
  
 static void __init l7200_init_irq(void)
 {
@@ -57,11 +68,9 @@ static void __init l7200_init_irq(void)
 	FIQ_ENABLECLEAR = 0xffffffff;	/* clear all fast interrupt enables */
 
 	for (irq = 0; irq < NR_IRQS; irq++) {
-		irq_desc[irq].valid	= 1;
-		irq_desc[irq].probe_ok	= 1;
-		irq_desc[irq].mask_ack	= l7200_mask_irq;
-		irq_desc[irq].mask	= l7200_mask_irq;
-		irq_desc[irq].unmask	= l7200_unmask_irq;
+		set_irq_chip(irq, &l7200_irq_chip);
+		set_irq_flags(irq, IRQF_VALID);
+		set_irq_handler(irq, do_level_IRQ);
 	}
 
 	init_FIQ();
diff --git a/arch/arm/mach-lh7a40x/arch-kev7a400.c b/arch/arm/mach-lh7a40x/arch-kev7a400.c
index cb3dcd3bd00a..19f2fa2244c4 100644
--- a/arch/arm/mach-lh7a40x/arch-kev7a400.c
+++ b/arch/arm/mach-lh7a40x/arch-kev7a400.c
@@ -26,8 +26,17 @@
       /* This function calls the board specific IRQ initialization function. */
 
 static struct map_desc kev7a400_io_desc[] __initdata = {
-	{ IO_VIRT,    IO_PHYS,    IO_SIZE,    MT_DEVICE },
-	{ CPLD_VIRT,  CPLD_PHYS,  CPLD_SIZE,  MT_DEVICE },
+	{
+		.virtual	= IO_VIRT,
+		.pfn		= __phys_to_pfn(IO_PHYS),
+		.length		= IO_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= CPLD_VIRT,
+		.pfn		= __phys_to_pfn(CPLD_PHYS),
+		.length		= CPLD_SIZE,
+		.type		= MT_DEVICE
+	}
 };
 
 void __init kev7a400_map_io(void)
diff --git a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
index 6eb61a17c63b..4eb962fdb3a8 100644
--- a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
@@ -10,7 +10,7 @@
 
 #include <linux/tty.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/interrupt.h>
 
 #include <asm/hardware.h>
@@ -227,23 +227,79 @@ void __init lh7a40x_init_board_irq (void)
 }
 
 static struct map_desc lpd7a400_io_desc[] __initdata = {
-	{     IO_VIRT,	    IO_PHYS,	    IO_SIZE,	MT_DEVICE },
-	/* Mapping added to work around chip select problems */
-	{ IOBARRIER_VIRT, IOBARRIER_PHYS, IOBARRIER_SIZE, MT_DEVICE },
-	{ CF_VIRT,	CF_PHYS,	CF_SIZE,	MT_DEVICE },
+	{
+		.virtual	=     IO_VIRT,
+		.pfn		= __phys_to_pfn(IO_PHYS),
+		.length		= 	    IO_SIZE,
+		.type		= MT_DEVICE
+	}, {	/* Mapping added to work around chip select problems */
+		.virtual	= IOBARRIER_VIRT,
+		.pfn		= __phys_to_pfn(IOBARRIER_PHYS),
+		.length		= IOBARRIER_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= CF_VIRT,
+		.pfn		= __phys_to_pfn(CF_PHYS),
+		.length		= 	CF_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= CPLD02_VIRT,
+		.pfn		= __phys_to_pfn(CPLD02_PHYS),
+		.length		= 	CPLD02_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= CPLD06_VIRT,
+		.pfn		= __phys_to_pfn(CPLD06_PHYS),
+		.length		= 	CPLD06_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= CPLD08_VIRT,
+		.pfn		= __phys_to_pfn(CPLD08_PHYS),
+		.length		= 	CPLD08_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= CPLD0C_VIRT,
+		.pfn		= __phys_to_pfn(CPLD0C_PHYS),
+		.length		= 	CPLD0C_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= CPLD0E_VIRT,
+		.pfn		= __phys_to_pfn(CPLD0E_PHYS),
+		.length		= 	CPLD0E_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= CPLD10_VIRT,
+		.pfn		= __phys_to_pfn(CPLD10_PHYS),
+		.length		= 	CPLD10_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= CPLD12_VIRT,
+		.pfn		= __phys_to_pfn(CPLD12_PHYS),
+		.length		= 	CPLD12_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= CPLD14_VIRT,
+		.pfn		= __phys_to_pfn(CPLD14_PHYS),
+		.length		= 	CPLD14_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= CPLD16_VIRT,
+		.pfn		= __phys_to_pfn(CPLD16_PHYS),
+		.length		= 	CPLD16_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= CPLD18_VIRT,
+		.pfn		= __phys_to_pfn(CPLD18_PHYS),
+		.length		= 	CPLD18_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= CPLD1A_VIRT,
+		.pfn		= __phys_to_pfn(CPLD1A_PHYS),
+		.length		= 	CPLD1A_SIZE,
+		.type		= MT_DEVICE
+	},
 	/* This mapping is redundant since the smc driver performs another. */
 /*	{ CPLD00_VIRT,  CPLD00_PHYS,	CPLD00_SIZE,	MT_DEVICE }, */
-	{ CPLD02_VIRT,  CPLD02_PHYS,	CPLD02_SIZE,	MT_DEVICE },
-	{ CPLD06_VIRT,  CPLD06_PHYS,	CPLD06_SIZE,	MT_DEVICE },
-	{ CPLD08_VIRT,	CPLD08_PHYS,	CPLD08_SIZE,	MT_DEVICE },
-	{ CPLD0C_VIRT,	CPLD0C_PHYS,	CPLD0C_SIZE,	MT_DEVICE },
-	{ CPLD0E_VIRT,	CPLD0E_PHYS,	CPLD0E_SIZE,	MT_DEVICE },
-	{ CPLD10_VIRT,	CPLD10_PHYS,	CPLD10_SIZE,	MT_DEVICE },
-	{ CPLD12_VIRT,	CPLD12_PHYS,	CPLD12_SIZE,	MT_DEVICE },
-	{ CPLD14_VIRT,	CPLD14_PHYS,	CPLD14_SIZE,	MT_DEVICE },
-	{ CPLD16_VIRT,	CPLD16_PHYS,	CPLD16_SIZE,	MT_DEVICE },
-	{ CPLD18_VIRT,	CPLD18_PHYS,	CPLD18_SIZE,	MT_DEVICE },
-	{ CPLD1A_VIRT,	CPLD1A_PHYS,	CPLD1A_SIZE,	MT_DEVICE },
 };
 
 void __init
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 27fc2e8e5fca..86a0f0d14345 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -6,10 +6,10 @@ config ARCH_OMAP730
 	bool "OMAP730 Based System"
 	select ARCH_OMAP_OTG
 
-config ARCH_OMAP1510
+config ARCH_OMAP15XX
 	depends on ARCH_OMAP1
 	default y
-	bool "OMAP1510 Based System"
+	bool "OMAP15xx Based System"
 
 config ARCH_OMAP16XX
 	depends on ARCH_OMAP1
@@ -21,7 +21,7 @@ comment "OMAP Board Type"
 
 config MACH_OMAP_INNOVATOR
 	bool "TI Innovator"
-	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
 	help
           TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
           have such a board.
@@ -64,20 +64,30 @@ config MACH_OMAP_PERSEUS2
 
 config MACH_VOICEBLUE
 	bool "Voiceblue"
-	depends on ARCH_OMAP1 && ARCH_OMAP1510
+	depends on ARCH_OMAP1 && ARCH_OMAP15XX
 	help
 	  Support for Voiceblue GSM/VoIP gateway. Say Y here if you have
 	  such a board.
 
 config MACH_NETSTAR
 	bool "NetStar"
-	depends on ARCH_OMAP1 && ARCH_OMAP1510
+	depends on ARCH_OMAP1 && ARCH_OMAP15XX
 	help
 	  Support for NetStar PBX. Say Y here if you have such a board.
 
+config MACH_OMAP_PALMTE
+	bool "Palm Tungsten E"
+	depends on ARCH_OMAP1 && ARCH_OMAP15XX
+	help
+          Support for the Palm Tungsten E PDA. Currently only the LCD panel
+          is supported. To boot the kernel, you'll need a PalmOS compatible
+          bootloader; check out http://palmtelinux.sourceforge.net for more
+          informations.
+          Say Y here if you have such a PDA, say NO otherwise.
+
 config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
-	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
 	help
           Support for generic OMAP-1510, 1610 or 1710 board with
           no FPGA. Can be used as template for porting Linux to
@@ -121,32 +131,32 @@ config OMAP_ARM_182MHZ
 
 config OMAP_ARM_168MHZ
 	bool "OMAP ARM 168 MHz CPU"
-	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
 	help
           Enable 168MHz clock for OMAP CPU. If unsure, say N.
 
 config OMAP_ARM_150MHZ
 	bool "OMAP ARM 150 MHz CPU"
-	depends on ARCH_OMAP1 && ARCH_OMAP1510
+	depends on ARCH_OMAP1 && ARCH_OMAP15XX
 	help
 	  Enable 150MHz clock for OMAP CPU. If unsure, say N.
 
 config OMAP_ARM_120MHZ
 	bool "OMAP ARM 120 MHz CPU"
-	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
 	help
           Enable 120MHz clock for OMAP CPU. If unsure, say N.
 
 config OMAP_ARM_60MHZ
 	bool "OMAP ARM 60 MHz CPU"
-	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
         default y
 	help
           Enable 60MHz clock for OMAP CPU. If unsure, say Y.
 
 config OMAP_ARM_30MHZ
 	bool "OMAP ARM 30 MHz CPU"
-	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
 	help
           Enable 30MHz clock for OMAP CPU. If unsure, say N.
 
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 181a93deaaee..b0b00156faae 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := io.o id.o irq.o time.o serial.o devices.o
+obj-y := io.o id.o clock.o irq.o time.o mux.o serial.o devices.o
 led-y := leds.o
 
 # Specific board support
@@ -15,8 +15,9 @@ obj-$(CONFIG_MACH_OMAP_OSK)		+= board-osk.o
 obj-$(CONFIG_MACH_OMAP_H3)		+= board-h3.o
 obj-$(CONFIG_MACH_VOICEBLUE)		+= board-voiceblue.o
 obj-$(CONFIG_MACH_NETSTAR)		+= board-netstar.o
+obj-$(CONFIG_MACH_OMAP_PALMTE)		+= board-palmte.o
 
-ifeq ($(CONFIG_ARCH_OMAP1510),y)
+ifeq ($(CONFIG_ARCH_OMAP15XX),y)
 # Innovator-1510 FPGA
 obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= fpga.o
 endif
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index c209c7172a9a..4b292e93fbe2 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -15,7 +15,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
@@ -28,8 +28,6 @@
 #include <asm/arch/board.h>
 #include <asm/arch/common.h>
 
-static int __initdata generic_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
-
 static void __init omap_generic_init_irq(void)
 {
 	omap_init_irq();
@@ -37,7 +35,7 @@ static void __init omap_generic_init_irq(void)
 
 /* assume no Mini-AB port */
 
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 static struct omap_usb_config generic1510_usb_config __initdata = {
 	.register_host	= 1,
 	.register_dev	= 1,
@@ -76,21 +74,19 @@ static struct omap_mmc_config generic_mmc_config __initdata = {
 
 #endif
 
+static struct omap_uart_config generic_uart_config __initdata = {
+	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
 static struct omap_board_config_kernel generic_config[] = {
 	{ OMAP_TAG_USB,           NULL },
 	{ OMAP_TAG_MMC,           &generic_mmc_config },
+	{ OMAP_TAG_UART,	&generic_uart_config },
 };
 
 static void __init omap_generic_init(void)
 {
-	const struct omap_uart_config *uart_conf;
-
-	/*
-	 * Make sure the serial ports are muxed on at this point.
-	 * You have to mux them off in device drivers later on
-	 * if not needed.
-	 */
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		generic_config[0].data = &generic1510_usb_config;
 	}
@@ -101,20 +97,9 @@ static void __init omap_generic_init(void)
 	}
 #endif
 
-	uart_conf = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
-	if (uart_conf != NULL) {
-		unsigned int enabled_ports, i;
-
-		enabled_ports = uart_conf->enabled_uarts;
-		for (i = 0; i < 3; i++) {
-			if (!(enabled_ports & (1 << i)))
-				generic_serial_ports[i] = 0;
-		}
-	}
-
 	omap_board_config = generic_config;
 	omap_board_config_size = ARRAY_SIZE(generic_config);
-	omap_serial_init(generic_serial_ports);
+	omap_serial_init();
 }
 
 static void __init omap_generic_map_io(void)
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index d46a70063b0c..a07e2c9307fa 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -21,7 +21,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -40,8 +40,6 @@
 
 extern int omap_gpio_init(void);
 
-static int __initdata h2_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
-
 static struct mtd_partition h2_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
 	{
@@ -160,9 +158,20 @@ static struct omap_mmc_config h2_mmc_config __initdata = {
 	},
 };
 
+static struct omap_uart_config h2_uart_config __initdata = {
+	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_lcd_config h2_lcd_config __initdata = {
+	.panel_name	= "h2",
+	.ctrl_name	= "internal",
+};
+
 static struct omap_board_config_kernel h2_config[] = {
 	{ OMAP_TAG_USB,           &h2_usb_config },
 	{ OMAP_TAG_MMC,           &h2_mmc_config },
+	{ OMAP_TAG_UART,	&h2_uart_config },
+	{ OMAP_TAG_LCD,		&h2_lcd_config },
 };
 
 static void __init h2_init(void)
@@ -180,12 +189,12 @@ static void __init h2_init(void)
 	platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
 	omap_board_config = h2_config;
 	omap_board_config_size = ARRAY_SIZE(h2_config);
+	omap_serial_init();
 }
 
 static void __init h2_map_io(void)
 {
 	omap_map_common_io();
-	omap_serial_init(h2_serial_ports);
 }
 
 MACHINE_START(OMAP_H2, "TI-H2")
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 2798613696fa..668e278433c2 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -19,7 +19,7 @@
 #include <linux/init.h>
 #include <linux/major.h>
 #include <linux/kernel.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/errno.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -41,8 +41,6 @@
 
 extern int omap_gpio_init(void);
 
-static int __initdata h3_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
-
 static struct mtd_partition h3_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
 	{
@@ -168,9 +166,20 @@ static struct omap_mmc_config h3_mmc_config __initdata = {
 	},
 };
 
+static struct omap_uart_config h3_uart_config __initdata = {
+	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_lcd_config h3_lcd_config __initdata = {
+	.panel_name	= "h3",
+	.ctrl_name	= "internal",
+};
+
 static struct omap_board_config_kernel h3_config[] = {
-	{ OMAP_TAG_USB,	 &h3_usb_config },
-	{ OMAP_TAG_MMC,  &h3_mmc_config },
+	{ OMAP_TAG_USB,		&h3_usb_config },
+	{ OMAP_TAG_MMC,		&h3_mmc_config },
+	{ OMAP_TAG_UART,	&h3_uart_config },
+	{ OMAP_TAG_LCD,		&h3_lcd_config },
 };
 
 static void __init h3_init(void)
@@ -180,6 +189,7 @@ static void __init h3_init(void)
 	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
 	omap_board_config = h3_config;
 	omap_board_config_size = ARRAY_SIZE(h3_config);
+	omap_serial_init();
 }
 
 static void __init h3_init_smc91x(void)
@@ -201,7 +211,6 @@ void h3_init_irq(void)
 static void __init h3_map_io(void)
 {
 	omap_map_common_io();
-	omap_serial_init(h3_serial_ports);
 }
 
 MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index df0312b596e4..95f1ff36cdcb 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -18,7 +18,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -36,8 +36,6 @@
 #include <asm/arch/usb.h>
 #include <asm/arch/common.h>
 
-static int __initdata innovator_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
-
 static struct mtd_partition innovator_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
 	{
@@ -99,12 +97,16 @@ static struct platform_device innovator_flash_device = {
 	.resource	= &innovator_flash_resource,
 };
 
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 
 /* Only FPGA needs to be mapped here. All others are done with ioremap */
 static struct map_desc innovator1510_io_desc[] __initdata = {
-{ OMAP1510_FPGA_BASE, OMAP1510_FPGA_START, OMAP1510_FPGA_SIZE,
-	MT_DEVICE },
+	{
+		.virtual	= OMAP1510_FPGA_BASE,
+		.pfn		= __phys_to_pfn(OMAP1510_FPGA_START),
+		.length		= OMAP1510_FPGA_SIZE,
+		.type		= MT_DEVICE
+	}
 };
 
 static struct resource innovator1510_smc91x_resources[] = {
@@ -132,7 +134,7 @@ static struct platform_device *innovator1510_devices[] __initdata = {
 	&innovator1510_smc91x_device,
 };
 
-#endif /* CONFIG_ARCH_OMAP1510 */
+#endif /* CONFIG_ARCH_OMAP15XX */
 
 #ifdef CONFIG_ARCH_OMAP16XX
 
@@ -181,7 +183,7 @@ void innovator_init_irq(void)
 {
 	omap_init_irq();
 	omap_gpio_init();
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		omap1510_fpga_init_irq();
 	}
@@ -189,7 +191,7 @@ void innovator_init_irq(void)
 	innovator_init_smc91x();
 }
 
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 static struct omap_usb_config innovator1510_usb_config __initdata = {
 	/* for bundled non-standard host and peripheral cables */
 	.hmc_mode	= 4,
@@ -201,6 +203,11 @@ static struct omap_usb_config innovator1510_usb_config __initdata = {
 	.register_dev	= 1,
 	.pins[0]	= 2,
 };
+
+static struct omap_lcd_config innovator1510_lcd_config __initdata = {
+	.panel_name	= "inn1510",
+	.ctrl_name	= "internal",
+};
 #endif
 
 #ifdef CONFIG_ARCH_OMAP16XX
@@ -218,6 +225,11 @@ static struct omap_usb_config h2_usb_config __initdata = {
 
 	.pins[1]	= 3,
 };
+
+static struct omap_lcd_config innovator1610_lcd_config __initdata = {
+	.panel_name	= "inn1610",
+	.ctrl_name	= "internal",
+};
 #endif
 
 static struct omap_mmc_config innovator_mmc_config __initdata = {
@@ -230,14 +242,20 @@ static struct omap_mmc_config innovator_mmc_config __initdata = {
 	},
 };
 
+static struct omap_uart_config innovator_uart_config __initdata = {
+	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
 static struct omap_board_config_kernel innovator_config[] = {
 	{ OMAP_TAG_USB,         NULL },
+	{ OMAP_TAG_LCD,		NULL },
 	{ OMAP_TAG_MMC,		&innovator_mmc_config },
+	{ OMAP_TAG_UART,	&innovator_uart_config },
 };
 
 static void __init innovator_init(void)
 {
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
 	}
@@ -248,23 +266,28 @@ static void __init innovator_init(void)
 	}
 #endif
 
-#ifdef CONFIG_ARCH_OMAP1510
-	if (cpu_is_omap1510())
+#ifdef CONFIG_ARCH_OMAP15XX
+	if (cpu_is_omap1510()) {
 		innovator_config[0].data = &innovator1510_usb_config;
+		innovator_config[1].data = &innovator1510_lcd_config;
+	}
 #endif
 #ifdef CONFIG_ARCH_OMAP16XX
-	if (cpu_is_omap1610())
+	if (cpu_is_omap1610()) {
 		innovator_config[0].data = &h2_usb_config;
+		innovator_config[1].data = &innovator1610_lcd_config;
+	}
 #endif
 	omap_board_config = innovator_config;
 	omap_board_config_size = ARRAY_SIZE(innovator_config);
+	omap_serial_init();
 }
 
 static void __init innovator_map_io(void)
 {
 	omap_map_common_io();
 
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
 		udelay(10);	/* Delay needed for FPGA */
@@ -276,7 +299,6 @@ static void __init innovator_map_io(void)
 		       fpga_read(OMAP1510_FPGA_BOARD_REV));
 	}
 #endif
-	omap_serial_init(innovator_serial_ports);
 }
 
 MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
diff --git a/arch/arm/mach-omap1/board-netstar.c b/arch/arm/mach-omap1/board-netstar.c
index d904e643f5ec..0448fa7de8a4 100644
--- a/arch/arm/mach-omap1/board-netstar.c
+++ b/arch/arm/mach-omap1/board-netstar.c
@@ -11,7 +11,7 @@
  */
 
 #include <linux/delay.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -55,6 +55,14 @@ static struct platform_device *netstar_devices[] __initdata = {
 	&netstar_smc91x_device,
 };
 
+static struct omap_uart_config netstar_uart_config __initdata = {
+	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_board_config_kernel netstar_config[] = {
+	{ OMAP_TAG_UART,	&netstar_uart_config },
+};
+
 static void __init netstar_init_irq(void)
 {
 	omap_init_irq();
@@ -92,14 +100,15 @@ static void __init netstar_init(void)
 	/* Switch off red LED */
 	omap_writeb(0x00, OMAP_LPG1_PMR);	/* Disable clock */
 	omap_writeb(0x80, OMAP_LPG1_LCR);
-}
 
-static int __initdata omap_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
+	omap_board_config = netstar_config;
+	omap_board_config_size = ARRAY_SIZE(netstar_config);
+	omap_serial_init();
+}
 
 static void __init netstar_map_io(void)
 {
 	omap_map_common_io();
-	omap_serial_init(omap_serial_ports);
 }
 
 #define MACHINE_PANICED		1
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 21103df50415..e990e1bc1669 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -28,7 +28,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/interrupt.h>
 
 #include <linux/mtd/mtd.h>
@@ -46,8 +46,6 @@
 #include <asm/arch/tc.h>
 #include <asm/arch/common.h>
 
-static int __initdata osk_serial_ports[OMAP_MAX_NR_PORTS] = {1, 0, 0};
-
 static struct mtd_partition osk_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
 	{
@@ -155,7 +153,7 @@ static void __init osk_init_smc91x(void)
 	}
 
 	/* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */
-	EMIFS_CCS(1) |= 0x2;
+	EMIFS_CCS(1) |= 0x3;
 }
 
 static void __init osk_init_cf(void)
@@ -193,8 +191,19 @@ static struct omap_usb_config osk_usb_config __initdata = {
 	.pins[0]	= 2,
 };
 
+static struct omap_uart_config osk_uart_config __initdata = {
+	.enabled_uarts = (1 << 0),
+};
+
+static struct omap_lcd_config osk_lcd_config __initdata = {
+	.panel_name	= "osk",
+	.ctrl_name	= "internal",
+};
+
 static struct omap_board_config_kernel osk_config[] = {
 	{ OMAP_TAG_USB,           &osk_usb_config },
+	{ OMAP_TAG_UART,		&osk_uart_config },
+	{ OMAP_TAG_LCD,			&osk_lcd_config },
 };
 
 #ifdef	CONFIG_OMAP_OSK_MISTRAL
@@ -254,13 +263,13 @@ static void __init osk_init(void)
 	omap_board_config_size = ARRAY_SIZE(osk_config);
 	USB_TRANSCEIVER_CTRL_REG |= (3 << 1);
 
+	omap_serial_init();
 	osk_mistral_init();
 }
 
 static void __init osk_map_io(void)
 {
 	omap_map_common_io();
-	omap_serial_init(osk_serial_ports);
 }
 
 MACHINE_START(OMAP_OSK, "TI-OSK")
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
new file mode 100644
index 000000000000..540b20d78cca
--- /dev/null
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -0,0 +1,87 @@
+/*
+ * linux/arch/arm/mach-omap1/board-palmte.c
+ *
+ * Modified from board-generic.c
+ *
+ * Support for the Palm Tungsten E PDA.
+ *
+ * Original version : Laurent Gonzalez
+ *
+ * Maintainters : http://palmtelinux.sf.net
+ *                palmtelinux-developpers@lists.sf.net
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/notifier.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/usb.h>
+#include <asm/arch/board.h>
+#include <asm/arch/common.h>
+#include <asm/hardware/clock.h>
+
+static void __init omap_generic_init_irq(void)
+{
+	omap_init_irq();
+}
+
+static struct omap_usb_config palmte_usb_config __initdata = {
+	.register_dev	= 1,
+	.hmc_mode	= 0,
+	.pins[0]	= 3,
+};
+
+static struct omap_mmc_config palmte_mmc_config __initdata = {
+	.mmc [0] = {
+		.enabled 	= 1,
+		.wire4		= 1,
+		.wp_pin		= OMAP_MPUIO(3),
+		.power_pin	= -1,
+		.switch_pin	= -1,
+	},
+};
+
+static struct omap_lcd_config palmte_lcd_config __initdata = {
+	.panel_name	= "palmte",
+	.ctrl_name	= "internal",
+};
+
+static struct omap_board_config_kernel palmte_config[] = {
+	{ OMAP_TAG_USB, &palmte_usb_config },
+	{ OMAP_TAG_MMC,	&palmte_mmc_config },
+	{ OMAP_TAG_LCD,	&palmte_lcd_config },
+};
+
+static void __init omap_generic_init(void)
+{
+	omap_board_config = palmte_config;
+	omap_board_config_size = ARRAY_SIZE(palmte_config);
+}
+
+static void __init omap_generic_map_io(void)
+{
+	omap_map_common_io();
+}
+
+MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
+	.phys_ram	= 0x10000000,
+	.phys_io	= 0xfff00000,
+	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
+	.boot_params	= 0x10000100,
+	.map_io		= omap_generic_map_io,
+	.init_irq	= omap_generic_init_irq,
+	.init_machine	= omap_generic_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 107c68c8ab54..bd900b7ab33c 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -13,7 +13,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -29,6 +29,7 @@
 #include <asm/arch/mux.h>
 #include <asm/arch/fpga.h>
 #include <asm/arch/common.h>
+#include <asm/arch/board.h>
 
 static struct resource smc91x_resources[] = {
 	[0] = {
@@ -43,8 +44,6 @@ static struct resource smc91x_resources[] = {
 	},
 };
 
-static int __initdata p2_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 0};
-
 static struct mtd_partition p2_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
 	{
@@ -111,9 +110,27 @@ static struct platform_device *devices[] __initdata = {
 	&smc91x_device,
 };
 
+static struct omap_uart_config perseus2_uart_config __initdata = {
+	.enabled_uarts = ((1 << 0) | (1 << 1)),
+};
+
+static struct omap_lcd_config perseus2_lcd_config __initdata = {
+	.panel_name	= "p2",
+	.ctrl_name	= "internal",
+};
+
+static struct omap_board_config_kernel perseus2_config[] = {
+	{ OMAP_TAG_UART,	&perseus2_uart_config },
+	{ OMAP_TAG_LCD,		&perseus2_lcd_config },
+};
+
 static void __init omap_perseus2_init(void)
 {
 	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	omap_board_config = perseus2_config;
+	omap_board_config_size = ARRAY_SIZE(perseus2_config);
+	omap_serial_init();
 }
 
 static void __init perseus2_init_smc91x(void)
@@ -131,11 +148,14 @@ void omap_perseus2_init_irq(void)
 	omap_gpio_init();
 	perseus2_init_smc91x();
 }
-
 /* Only FPGA needs to be mapped here. All others are done with ioremap */
 static struct map_desc omap_perseus2_io_desc[] __initdata = {
-	{H2P2_DBG_FPGA_BASE, H2P2_DBG_FPGA_START, H2P2_DBG_FPGA_SIZE,
-	 MT_DEVICE},
+	{
+		.virtual	= H2P2_DBG_FPGA_BASE,
+		.pfn		= __phys_to_pfn(H2P2_DBG_FPGA_START),
+		.length		= H2P2_DBG_FPGA_SIZE,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init omap_perseus2_map_io(void)
@@ -175,7 +195,6 @@ static void __init omap_perseus2_map_io(void)
 	 * It is used as the Ethernet controller interrupt
 	 */
 	omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
-	omap_serial_init(p2_serial_ports);
 }
 
 MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index bf30b1acda0b..6f9a6220e78a 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -13,7 +13,7 @@
  */
 
 #include <linux/delay.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -150,9 +150,14 @@ static struct omap_mmc_config voiceblue_mmc_config __initdata = {
 	},
 };
 
+static struct omap_uart_config voiceblue_uart_config __initdata = {
+	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
 static struct omap_board_config_kernel voiceblue_config[] = {
 	{ OMAP_TAG_USB, &voiceblue_usb_config },
 	{ OMAP_TAG_MMC, &voiceblue_mmc_config },
+	{ OMAP_TAG_UART,	&voiceblue_uart_config },
 };
 
 static void __init voiceblue_init_irq(void)
@@ -191,6 +196,7 @@ static void __init voiceblue_init(void)
 	platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
 	omap_board_config = voiceblue_config;
 	omap_board_config_size = ARRAY_SIZE(voiceblue_config);
+	omap_serial_init();
 
 	/* There is a good chance board is going up, so enable power LED
 	 * (it is connected through invertor) */
@@ -198,12 +204,9 @@ static void __init voiceblue_init(void)
 	omap_writeb(0x00, OMAP_LPG1_PMR);	/* Disable clock */
 }
 
-static int __initdata omap_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
-
 static void __init voiceblue_map_io(void)
 {
 	omap_map_common_io();
-	omap_serial_init(omap_serial_ports);
 }
 
 #define MACHINE_PANICED		1
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
new file mode 100644
index 000000000000..4277eee44ed5
--- /dev/null
+++ b/arch/arm/mach-omap1/clock.c
@@ -0,0 +1,792 @@
+/*
+ *  linux/arch/arm/mach-omap1/clock.c
+ *
+ *  Copyright (C) 2004 - 2005 Nokia corporation
+ *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *
+ *  Modified to use omap shared clock framework by
+ *  Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+
+#include <asm/io.h>
+#include <asm/hardware/clock.h>
+
+#include <asm/arch/usb.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sram.h>
+
+#include "clock.h"
+
+__u32 arm_idlect1_mask;
+
+/*-------------------------------------------------------------------------
+ * Omap1 specific clock functions
+ *-------------------------------------------------------------------------*/
+
+static void omap1_watchdog_recalc(struct clk * clk)
+{
+	clk->rate = clk->parent->rate / 14;
+}
+
+static void omap1_uart_recalc(struct clk * clk)
+{
+	unsigned int val = omap_readl(clk->enable_reg);
+	if (val & clk->enable_bit)
+		clk->rate = 48000000;
+	else
+		clk->rate = 12000000;
+}
+
+static int omap1_clk_enable_dsp_domain(struct clk *clk)
+{
+	int retval;
+
+	retval = omap1_clk_use(&api_ck.clk);
+	if (!retval) {
+		retval = omap1_clk_enable(clk);
+		omap1_clk_unuse(&api_ck.clk);
+	}
+
+	return retval;
+}
+
+static void omap1_clk_disable_dsp_domain(struct clk *clk)
+{
+	if (omap1_clk_use(&api_ck.clk) == 0) {
+		omap1_clk_disable(clk);
+		omap1_clk_unuse(&api_ck.clk);
+	}
+}
+
+static int omap1_clk_enable_uart_functional(struct clk *clk)
+{
+	int ret;
+	struct uart_clk *uclk;
+
+	ret = omap1_clk_enable(clk);
+	if (ret == 0) {
+		/* Set smart idle acknowledgement mode */
+		uclk = (struct uart_clk *)clk;
+		omap_writeb((omap_readb(uclk->sysc_addr) & ~0x10) | 8,
+			    uclk->sysc_addr);
+	}
+
+	return ret;
+}
+
+static void omap1_clk_disable_uart_functional(struct clk *clk)
+{
+	struct uart_clk *uclk;
+
+	/* Set force idle acknowledgement mode */
+	uclk = (struct uart_clk *)clk;
+	omap_writeb((omap_readb(uclk->sysc_addr) & ~0x18), uclk->sysc_addr);
+
+	omap1_clk_disable(clk);
+}
+
+static void omap1_clk_allow_idle(struct clk *clk)
+{
+	struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk;
+
+	if (!(clk->flags & CLOCK_IDLE_CONTROL))
+		return;
+
+	if (iclk->no_idle_count > 0 && !(--iclk->no_idle_count))
+		arm_idlect1_mask |= 1 << iclk->idlect_shift;
+}
+
+static void omap1_clk_deny_idle(struct clk *clk)
+{
+	struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk;
+
+	if (!(clk->flags & CLOCK_IDLE_CONTROL))
+		return;
+
+	if (iclk->no_idle_count++ == 0)
+		arm_idlect1_mask &= ~(1 << iclk->idlect_shift);
+}
+
+static __u16 verify_ckctl_value(__u16 newval)
+{
+	/* This function checks for following limitations set
+	 * by the hardware (all conditions must be true):
+	 * DSPMMU_CK == DSP_CK  or  DSPMMU_CK == DSP_CK/2
+	 * ARM_CK >= TC_CK
+	 * DSP_CK >= TC_CK
+	 * DSPMMU_CK >= TC_CK
+	 *
+	 * In addition following rules are enforced:
+	 * LCD_CK <= TC_CK
+	 * ARMPER_CK <= TC_CK
+	 *
+	 * However, maximum frequencies are not checked for!
+	 */
+	__u8 per_exp;
+	__u8 lcd_exp;
+	__u8 arm_exp;
+	__u8 dsp_exp;
+	__u8 tc_exp;
+	__u8 dspmmu_exp;
+
+	per_exp = (newval >> CKCTL_PERDIV_OFFSET) & 3;
+	lcd_exp = (newval >> CKCTL_LCDDIV_OFFSET) & 3;
+	arm_exp = (newval >> CKCTL_ARMDIV_OFFSET) & 3;
+	dsp_exp = (newval >> CKCTL_DSPDIV_OFFSET) & 3;
+	tc_exp = (newval >> CKCTL_TCDIV_OFFSET) & 3;
+	dspmmu_exp = (newval >> CKCTL_DSPMMUDIV_OFFSET) & 3;
+
+	if (dspmmu_exp < dsp_exp)
+		dspmmu_exp = dsp_exp;
+	if (dspmmu_exp > dsp_exp+1)
+		dspmmu_exp = dsp_exp+1;
+	if (tc_exp < arm_exp)
+		tc_exp = arm_exp;
+	if (tc_exp < dspmmu_exp)
+		tc_exp = dspmmu_exp;
+	if (tc_exp > lcd_exp)
+		lcd_exp = tc_exp;
+	if (tc_exp > per_exp)
+		per_exp = tc_exp;
+
+	newval &= 0xf000;
+	newval |= per_exp << CKCTL_PERDIV_OFFSET;
+	newval |= lcd_exp << CKCTL_LCDDIV_OFFSET;
+	newval |= arm_exp << CKCTL_ARMDIV_OFFSET;
+	newval |= dsp_exp << CKCTL_DSPDIV_OFFSET;
+	newval |= tc_exp << CKCTL_TCDIV_OFFSET;
+	newval |= dspmmu_exp << CKCTL_DSPMMUDIV_OFFSET;
+
+	return newval;
+}
+
+static int calc_dsor_exp(struct clk *clk, unsigned long rate)
+{
+	/* Note: If target frequency is too low, this function will return 4,
+	 * which is invalid value. Caller must check for this value and act
+	 * accordingly.
+	 *
+	 * Note: This function does not check for following limitations set
+	 * by the hardware (all conditions must be true):
+	 * DSPMMU_CK == DSP_CK  or  DSPMMU_CK == DSP_CK/2
+	 * ARM_CK >= TC_CK
+	 * DSP_CK >= TC_CK
+	 * DSPMMU_CK >= TC_CK
+	 */
+	unsigned long realrate;
+	struct clk * parent;
+	unsigned  dsor_exp;
+
+	if (unlikely(!(clk->flags & RATE_CKCTL)))
+		return -EINVAL;
+
+	parent = clk->parent;
+	if (unlikely(parent == 0))
+		return -EIO;
+
+	realrate = parent->rate;
+	for (dsor_exp=0; dsor_exp<4; dsor_exp++) {
+		if (realrate <= rate)
+			break;
+
+		realrate /= 2;
+	}
+
+	return dsor_exp;
+}
+
+static void omap1_ckctl_recalc(struct clk * clk)
+{
+	int dsor;
+
+	/* Calculate divisor encoded as 2-bit exponent */
+	dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset));
+
+	if (unlikely(clk->rate == clk->parent->rate / dsor))
+		return; /* No change, quick exit */
+	clk->rate = clk->parent->rate / dsor;
+
+	if (unlikely(clk->flags & RATE_PROPAGATES))
+		propagate_rate(clk);
+}
+
+static void omap1_ckctl_recalc_dsp_domain(struct clk * clk)
+{
+	int dsor;
+
+	/* Calculate divisor encoded as 2-bit exponent
+	 *
+	 * The clock control bits are in DSP domain,
+	 * so api_ck is needed for access.
+	 * Note that DSP_CKCTL virt addr = phys addr, so
+	 * we must use __raw_readw() instead of omap_readw().
+	 */
+	omap1_clk_use(&api_ck.clk);
+	dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset));
+	omap1_clk_unuse(&api_ck.clk);
+
+	if (unlikely(clk->rate == clk->parent->rate / dsor))
+		return; /* No change, quick exit */
+	clk->rate = clk->parent->rate / dsor;
+
+	if (unlikely(clk->flags & RATE_PROPAGATES))
+		propagate_rate(clk);
+}
+
+/* MPU virtual clock functions */
+static int omap1_select_table_rate(struct clk * clk, unsigned long rate)
+{
+	/* Find the highest supported frequency <= rate and switch to it */
+	struct mpu_rate * ptr;
+
+	if (clk != &virtual_ck_mpu)
+		return -EINVAL;
+
+	for (ptr = rate_table; ptr->rate; ptr++) {
+		if (ptr->xtal != ck_ref.rate)
+			continue;
+
+		/* DPLL1 cannot be reprogrammed without risking system crash */
+		if (likely(ck_dpll1.rate!=0) && ptr->pll_rate != ck_dpll1.rate)
+			continue;
+
+		/* Can check only after xtal frequency check */
+		if (ptr->rate <= rate)
+			break;
+	}
+
+	if (!ptr->rate)
+		return -EINVAL;
+
+	/*
+	 * In most cases we should not need to reprogram DPLL.
+	 * Reprogramming the DPLL is tricky, it must be done from SRAM.
+	 */
+	omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
+
+	ck_dpll1.rate = ptr->pll_rate;
+	propagate_rate(&ck_dpll1);
+	return 0;
+}
+
+static int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate)
+{
+	int  ret = -EINVAL;
+	int  dsor_exp;
+	__u16  regval;
+
+	if (clk->flags & RATE_CKCTL) {
+		dsor_exp = calc_dsor_exp(clk, rate);
+		if (dsor_exp > 3)
+			dsor_exp = -EINVAL;
+		if (dsor_exp < 0)
+			return dsor_exp;
+
+		regval = __raw_readw(DSP_CKCTL);
+		regval &= ~(3 << clk->rate_offset);
+		regval |= dsor_exp << clk->rate_offset;
+		__raw_writew(regval, DSP_CKCTL);
+		clk->rate = clk->parent->rate / (1 << dsor_exp);
+		ret = 0;
+	}
+
+	if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES)))
+		propagate_rate(clk);
+
+	return ret;
+}
+
+static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate)
+{
+	/* Find the highest supported frequency <= rate */
+	struct mpu_rate * ptr;
+	long  highest_rate;
+
+	if (clk != &virtual_ck_mpu)
+		return -EINVAL;
+
+	highest_rate = -EINVAL;
+
+	for (ptr = rate_table; ptr->rate; ptr++) {
+		if (ptr->xtal != ck_ref.rate)
+			continue;
+
+		highest_rate = ptr->rate;
+
+		/* Can check only after xtal frequency check */
+		if (ptr->rate <= rate)
+			break;
+	}
+
+	return highest_rate;
+}
+
+static unsigned calc_ext_dsor(unsigned long rate)
+{
+	unsigned dsor;
+
+	/* MCLK and BCLK divisor selection is not linear:
+	 * freq = 96MHz / dsor
+	 *
+	 * RATIO_SEL range: dsor <-> RATIO_SEL
+	 * 0..6: (RATIO_SEL+2) <-> (dsor-2)
+	 * 6..48:  (8+(RATIO_SEL-6)*2) <-> ((dsor-8)/2+6)
+	 * Minimum dsor is 2 and maximum is 96. Odd divisors starting from 9
+	 * can not be used.
+	 */
+	for (dsor = 2; dsor < 96; ++dsor) {
+		if ((dsor & 1) && dsor > 8)
+		  	continue;
+		if (rate >= 96000000 / dsor)
+			break;
+	}
+	return dsor;
+}
+
+/* Only needed on 1510 */
+static int omap1_set_uart_rate(struct clk * clk, unsigned long rate)
+{
+	unsigned int val;
+
+	val = omap_readl(clk->enable_reg);
+	if (rate == 12000000)
+		val &= ~(1 << clk->enable_bit);
+	else if (rate == 48000000)
+		val |= (1 << clk->enable_bit);
+	else
+		return -EINVAL;
+	omap_writel(val, clk->enable_reg);
+	clk->rate = rate;
+
+	return 0;
+}
+
+/* External clock (MCLK & BCLK) functions */
+static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate)
+{
+	unsigned dsor;
+	__u16 ratio_bits;
+
+	dsor = calc_ext_dsor(rate);
+	clk->rate = 96000000 / dsor;
+	if (dsor > 8)
+		ratio_bits = ((dsor - 8) / 2 + 6) << 2;
+	else
+		ratio_bits = (dsor - 2) << 2;
+
+	ratio_bits |= omap_readw(clk->enable_reg) & ~0xfd;
+	omap_writew(ratio_bits, clk->enable_reg);
+
+	return 0;
+}
+
+static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate)
+{
+	return 96000000 / calc_ext_dsor(rate);
+}
+
+static void omap1_init_ext_clk(struct clk * clk)
+{
+	unsigned dsor;
+	__u16 ratio_bits;
+
+	/* Determine current rate and ensure clock is based on 96MHz APLL */
+	ratio_bits = omap_readw(clk->enable_reg) & ~1;
+	omap_writew(ratio_bits, clk->enable_reg);
+
+	ratio_bits = (ratio_bits & 0xfc) >> 2;
+	if (ratio_bits > 6)
+		dsor = (ratio_bits - 6) * 2 + 8;
+	else
+		dsor = ratio_bits + 2;
+
+	clk-> rate = 96000000 / dsor;
+}
+
+static int omap1_clk_use(struct clk *clk)
+{
+	int ret = 0;
+	if (clk->usecount++ == 0) {
+		if (likely(clk->parent)) {
+			ret = omap1_clk_use(clk->parent);
+
+			if (unlikely(ret != 0)) {
+				clk->usecount--;
+				return ret;
+			}
+
+			if (clk->flags & CLOCK_NO_IDLE_PARENT)
+				if (!cpu_is_omap24xx())
+					omap1_clk_deny_idle(clk->parent);
+		}
+
+		ret = clk->enable(clk);
+
+		if (unlikely(ret != 0) && clk->parent) {
+			omap1_clk_unuse(clk->parent);
+			clk->usecount--;
+		}
+	}
+
+	return ret;
+}
+
+static void omap1_clk_unuse(struct clk *clk)
+{
+	if (clk->usecount > 0 && !(--clk->usecount)) {
+		clk->disable(clk);
+		if (likely(clk->parent)) {
+			omap1_clk_unuse(clk->parent);
+			if (clk->flags & CLOCK_NO_IDLE_PARENT)
+				if (!cpu_is_omap24xx())
+					omap1_clk_allow_idle(clk->parent);
+		}
+	}
+}
+
+static int omap1_clk_enable(struct clk *clk)
+{
+	__u16 regval16;
+	__u32 regval32;
+
+	if (clk->flags & ALWAYS_ENABLED)
+		return 0;
+
+	if (unlikely(clk->enable_reg == 0)) {
+		printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
+		       clk->name);
+		return 0;
+	}
+
+	if (clk->flags & ENABLE_REG_32BIT) {
+		if (clk->flags & VIRTUAL_IO_ADDRESS) {
+			regval32 = __raw_readl(clk->enable_reg);
+			regval32 |= (1 << clk->enable_bit);
+			__raw_writel(regval32, clk->enable_reg);
+		} else {
+			regval32 = omap_readl(clk->enable_reg);
+			regval32 |= (1 << clk->enable_bit);
+			omap_writel(regval32, clk->enable_reg);
+		}
+	} else {
+		if (clk->flags & VIRTUAL_IO_ADDRESS) {
+			regval16 = __raw_readw(clk->enable_reg);
+			regval16 |= (1 << clk->enable_bit);
+			__raw_writew(regval16, clk->enable_reg);
+		} else {
+			regval16 = omap_readw(clk->enable_reg);
+			regval16 |= (1 << clk->enable_bit);
+			omap_writew(regval16, clk->enable_reg);
+		}
+	}
+
+	return 0;
+}
+
+static void omap1_clk_disable(struct clk *clk)
+{
+	__u16 regval16;
+	__u32 regval32;
+
+	if (clk->enable_reg == 0)
+		return;
+
+	if (clk->flags & ENABLE_REG_32BIT) {
+		if (clk->flags & VIRTUAL_IO_ADDRESS) {
+			regval32 = __raw_readl(clk->enable_reg);
+			regval32 &= ~(1 << clk->enable_bit);
+			__raw_writel(regval32, clk->enable_reg);
+		} else {
+			regval32 = omap_readl(clk->enable_reg);
+			regval32 &= ~(1 << clk->enable_bit);
+			omap_writel(regval32, clk->enable_reg);
+		}
+	} else {
+		if (clk->flags & VIRTUAL_IO_ADDRESS) {
+			regval16 = __raw_readw(clk->enable_reg);
+			regval16 &= ~(1 << clk->enable_bit);
+			__raw_writew(regval16, clk->enable_reg);
+		} else {
+			regval16 = omap_readw(clk->enable_reg);
+			regval16 &= ~(1 << clk->enable_bit);
+			omap_writew(regval16, clk->enable_reg);
+		}
+	}
+}
+
+static long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	int dsor_exp;
+
+	if (clk->flags & RATE_FIXED)
+		return clk->rate;
+
+	if (clk->flags & RATE_CKCTL) {
+		dsor_exp = calc_dsor_exp(clk, rate);
+		if (dsor_exp < 0)
+			return dsor_exp;
+		if (dsor_exp > 3)
+			dsor_exp = 3;
+		return clk->parent->rate / (1 << dsor_exp);
+	}
+
+	if(clk->round_rate != 0)
+		return clk->round_rate(clk, rate);
+
+	return clk->rate;
+}
+
+static int omap1_clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	int  ret = -EINVAL;
+	int  dsor_exp;
+	__u16  regval;
+
+	if (clk->set_rate)
+		ret = clk->set_rate(clk, rate);
+	else if (clk->flags & RATE_CKCTL) {
+		dsor_exp = calc_dsor_exp(clk, rate);
+		if (dsor_exp > 3)
+			dsor_exp = -EINVAL;
+		if (dsor_exp < 0)
+			return dsor_exp;
+
+		regval = omap_readw(ARM_CKCTL);
+		regval &= ~(3 << clk->rate_offset);
+		regval |= dsor_exp << clk->rate_offset;
+		regval = verify_ckctl_value(regval);
+		omap_writew(regval, ARM_CKCTL);
+		clk->rate = clk->parent->rate / (1 << dsor_exp);
+		ret = 0;
+	}
+
+	if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES)))
+		propagate_rate(clk);
+
+	return ret;
+}
+
+/*-------------------------------------------------------------------------
+ * Omap1 clock reset and init functions
+ *-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+/*
+ * Resets some clocks that may be left on from bootloader,
+ * but leaves serial clocks on. See also omap_late_clk_reset().
+ */
+static inline void omap1_early_clk_reset(void)
+{
+	//omap_writel(0x3 << 29, MOD_CONF_CTRL_0);
+}
+
+static int __init omap1_late_clk_reset(void)
+{
+	/* Turn off all unused clocks */
+	struct clk *p;
+	__u32 regval32;
+
+	/* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
+	regval32 = omap_readw(SOFT_REQ_REG) & (1 << 4);
+	omap_writew(regval32, SOFT_REQ_REG);
+	omap_writew(0, SOFT_REQ_REG2);
+
+	list_for_each_entry(p, &clocks, node) {
+		if (p->usecount > 0 || (p->flags & ALWAYS_ENABLED) ||
+			p->enable_reg == 0)
+			continue;
+
+		/* Clocks in the DSP domain need api_ck. Just assume bootloader
+		 * has not enabled any DSP clocks */
+		if ((u32)p->enable_reg == DSP_IDLECT2) {
+			printk(KERN_INFO "Skipping reset check for DSP domain "
+			       "clock \"%s\"\n", p->name);
+			continue;
+		}
+
+		/* Is the clock already disabled? */
+		if (p->flags & ENABLE_REG_32BIT) {
+			if (p->flags & VIRTUAL_IO_ADDRESS)
+				regval32 = __raw_readl(p->enable_reg);
+			else
+				regval32 = omap_readl(p->enable_reg);
+		} else {
+			if (p->flags & VIRTUAL_IO_ADDRESS)
+				regval32 = __raw_readw(p->enable_reg);
+			else
+				regval32 = omap_readw(p->enable_reg);
+		}
+
+		if ((regval32 & (1 << p->enable_bit)) == 0)
+			continue;
+
+		/* FIXME: This clock seems to be necessary but no-one
+		 * has asked for its activation. */
+		if (p == &tc2_ck         // FIX: pm.c (SRAM), CCP, Camera
+		    || p == &ck_dpll1out.clk // FIX: SoSSI, SSR
+		    || p == &arm_gpio_ck // FIX: GPIO code for 1510
+		    ) {
+			printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n",
+			       p->name);
+			continue;
+		}
+
+		printk(KERN_INFO "Disabling unused clock \"%s\"... ", p->name);
+		p->disable(p);
+		printk(" done\n");
+	}
+
+	return 0;
+}
+late_initcall(omap1_late_clk_reset);
+
+#else
+#define omap1_early_clk_reset()	{}
+#endif
+
+static struct clk_functions omap1_clk_functions = {
+	.clk_use		= omap1_clk_use,
+	.clk_unuse		= omap1_clk_unuse,
+	.clk_round_rate		= omap1_clk_round_rate,
+	.clk_set_rate		= omap1_clk_set_rate,
+};
+
+int __init omap1_clk_init(void)
+{
+	struct clk ** clkp;
+	const struct omap_clock_config *info;
+	int crystal_type = 0; /* Default 12 MHz */
+
+	omap1_early_clk_reset();
+	clk_init(&omap1_clk_functions);
+
+	/* By default all idlect1 clocks are allowed to idle */
+	arm_idlect1_mask = ~0;
+
+	for (clkp = onchip_clks; clkp < onchip_clks+ARRAY_SIZE(onchip_clks); clkp++) {
+		if (((*clkp)->flags &CLOCK_IN_OMAP1510) && cpu_is_omap1510()) {
+			clk_register(*clkp);
+			continue;
+		}
+
+		if (((*clkp)->flags &CLOCK_IN_OMAP16XX) && cpu_is_omap16xx()) {
+			clk_register(*clkp);
+			continue;
+		}
+
+		if (((*clkp)->flags &CLOCK_IN_OMAP730) && cpu_is_omap730()) {
+			clk_register(*clkp);
+			continue;
+		}
+	}
+
+	info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config);
+	if (info != NULL) {
+		if (!cpu_is_omap1510())
+			crystal_type = info->system_clock_type;
+	}
+
+#if defined(CONFIG_ARCH_OMAP730)
+	ck_ref.rate = 13000000;
+#elif defined(CONFIG_ARCH_OMAP16XX)
+	if (crystal_type == 2)
+		ck_ref.rate = 19200000;
+#endif
+
+	printk("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n",
+	       omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
+	       omap_readw(ARM_CKCTL));
+
+	/* We want to be in syncronous scalable mode */
+	omap_writew(0x1000, ARM_SYSST);
+
+#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER
+	/* Use values set by bootloader. Determine PLL rate and recalculate
+	 * dependent clocks as if kernel had changed PLL or divisors.
+	 */
+	{
+		unsigned pll_ctl_val = omap_readw(DPLL_CTL);
+
+		ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */
+		if (pll_ctl_val & 0x10) {
+			/* PLL enabled, apply multiplier and divisor */
+			if (pll_ctl_val & 0xf80)
+				ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7;
+			ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1;
+		} else {
+			/* PLL disabled, apply bypass divisor */
+			switch (pll_ctl_val & 0xc) {
+			case 0:
+				break;
+			case 0x4:
+				ck_dpll1.rate /= 2;
+				break;
+			default:
+				ck_dpll1.rate /= 4;
+				break;
+			}
+		}
+	}
+	propagate_rate(&ck_dpll1);
+#else
+	/* Find the highest supported frequency and enable it */
+	if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
+		printk(KERN_ERR "System frequencies not set. Check your config.\n");
+		/* Guess sane values (60MHz) */
+		omap_writew(0x2290, DPLL_CTL);
+		omap_writew(0x1005, ARM_CKCTL);
+		ck_dpll1.rate = 60000000;
+		propagate_rate(&ck_dpll1);
+	}
+#endif
+	/* Cache rates for clocks connected to ck_ref (not dpll1) */
+	propagate_rate(&ck_ref);
+	printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): "
+		"%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
+	       ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
+	       ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
+	       arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
+
+#ifdef CONFIG_MACH_OMAP_PERSEUS2
+	/* Select slicer output as OMAP input clock */
+	omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL);
+#endif
+
+	/* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
+	omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
+
+	/* Put DSP/MPUI into reset until needed */
+	omap_writew(0, ARM_RSTCT1);
+	omap_writew(1, ARM_RSTCT2);
+	omap_writew(0x400, ARM_IDLECT1);
+
+	/*
+	 * According to OMAP5910 Erratum SYS_DMA_1, bit DMACK_REQ (bit 8)
+	 * of the ARM_IDLECT2 register must be set to zero. The power-on
+	 * default value of this bit is one.
+	 */
+	omap_writew(0x0000, ARM_IDLECT2);	/* Turn LCD clock off also */
+
+	/*
+	 * Only enable those clocks we will need, let the drivers
+	 * enable other clocks as necessary
+	 */
+	clk_use(&armper_ck.clk);
+	clk_use(&armxor_ck.clk);
+	clk_use(&armtim_ck.clk); /* This should be done by timer code */
+
+	if (cpu_is_omap1510())
+		clk_enable(&arm_gpio_ck);
+
+	return 0;
+}
+
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
new file mode 100644
index 000000000000..f3bdfb50e01a
--- /dev/null
+++ b/arch/arm/mach-omap1/clock.h
@@ -0,0 +1,768 @@
+/*
+ *  linux/arch/arm/mach-omap1/clock.h
+ *
+ *  Copyright (C) 2004 - 2005 Nokia corporation
+ *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP1_CLOCK_H
+#define __ARCH_ARM_MACH_OMAP1_CLOCK_H
+
+static int omap1_clk_enable(struct clk * clk);
+static void omap1_clk_disable(struct clk * clk);
+static void omap1_ckctl_recalc(struct clk * clk);
+static void omap1_watchdog_recalc(struct clk * clk);
+static void omap1_ckctl_recalc_dsp_domain(struct clk * clk);
+static int omap1_clk_enable_dsp_domain(struct clk * clk);
+static int omap1_clk_set_rate_dsp_domain(struct clk * clk, unsigned long rate);
+static void omap1_clk_disable_dsp_domain(struct clk * clk);
+static int omap1_set_uart_rate(struct clk * clk, unsigned long rate);
+static void omap1_uart_recalc(struct clk * clk);
+static int omap1_clk_enable_uart_functional(struct clk * clk);
+static void omap1_clk_disable_uart_functional(struct clk * clk);
+static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate);
+static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate);
+static void omap1_init_ext_clk(struct clk * clk);
+static int omap1_select_table_rate(struct clk * clk, unsigned long rate);
+static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate);
+static int omap1_clk_use(struct clk *clk);
+static void omap1_clk_unuse(struct clk *clk);
+
+struct mpu_rate {
+	unsigned long		rate;
+	unsigned long		xtal;
+	unsigned long		pll_rate;
+	__u16			ckctl_val;
+	__u16			dpllctl_val;
+};
+
+struct uart_clk {
+	struct clk	clk;
+	unsigned long	sysc_addr;
+};
+
+/* Provide a method for preventing idling some ARM IDLECT clocks */
+struct arm_idlect1_clk {
+	struct clk	clk;
+	unsigned long	no_idle_count;
+	__u8		idlect_shift;
+};
+
+/* ARM_CKCTL bit shifts */
+#define CKCTL_PERDIV_OFFSET	0
+#define CKCTL_LCDDIV_OFFSET	2
+#define CKCTL_ARMDIV_OFFSET	4
+#define CKCTL_DSPDIV_OFFSET	6
+#define CKCTL_TCDIV_OFFSET	8
+#define CKCTL_DSPMMUDIV_OFFSET	10
+/*#define ARM_TIMXO		12*/
+#define EN_DSPCK		13
+/*#define ARM_INTHCK_SEL	14*/ /* Divide-by-2 for mpu inth_ck */
+/* DSP_CKCTL bit shifts */
+#define CKCTL_DSPPERDIV_OFFSET	0
+
+/* ARM_IDLECT2 bit shifts */
+#define EN_WDTCK	0
+#define EN_XORPCK	1
+#define EN_PERCK	2
+#define EN_LCDCK	3
+#define EN_LBCK		4 /* Not on 1610/1710 */
+/*#define EN_HSABCK	5*/
+#define EN_APICK	6
+#define EN_TIMCK	7
+#define DMACK_REQ	8
+#define EN_GPIOCK	9 /* Not on 1610/1710 */
+/*#define EN_LBFREECK	10*/
+#define EN_CKOUT_ARM	11
+
+/* ARM_IDLECT3 bit shifts */
+#define EN_OCPI_CK	0
+#define EN_TC1_CK	2
+#define EN_TC2_CK	4
+
+/* DSP_IDLECT2 bit shifts (0,1,2 are same as for ARM_IDLECT2) */
+#define EN_DSPTIMCK	5
+
+/* Various register defines for clock controls scattered around OMAP chip */
+#define USB_MCLK_EN_BIT		4	/* In ULPD_CLKC_CTRL */
+#define USB_HOST_HHC_UHOST_EN	9	/* In MOD_CONF_CTRL_0 */
+#define SWD_ULPD_PLL_CLK_REQ	1	/* In SWD_CLK_DIV_CTRL_SEL */
+#define COM_ULPD_PLL_CLK_REQ	1	/* In COM_CLK_DIV_CTRL_SEL */
+#define SWD_CLK_DIV_CTRL_SEL	0xfffe0874
+#define COM_CLK_DIV_CTRL_SEL	0xfffe0878
+#define SOFT_REQ_REG		0xfffe0834
+#define SOFT_REQ_REG2		0xfffe0880
+
+/*-------------------------------------------------------------------------
+ * Omap1 MPU rate table
+ *-------------------------------------------------------------------------*/
+static struct mpu_rate rate_table[] = {
+	/* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL
+	 * NOTE: Comment order here is different from bits in CKCTL value:
+	 * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv
+	 */
+#if defined(CONFIG_OMAP_ARM_216MHZ)
+	{ 216000000, 12000000, 216000000, 0x050d, 0x2910 }, /* 1/1/2/2/2/8 */
+#endif
+#if defined(CONFIG_OMAP_ARM_195MHZ)
+	{ 195000000, 13000000, 195000000, 0x050e, 0x2790 }, /* 1/1/2/2/4/8 */
+#endif
+#if defined(CONFIG_OMAP_ARM_192MHZ)
+	{ 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */
+	{ 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */
+	{  96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */
+	{  48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/4/4/8/8/8 */
+	{  24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */
+#endif
+#if defined(CONFIG_OMAP_ARM_182MHZ)
+	{ 182000000, 13000000, 182000000, 0x050e, 0x2710 }, /* 1/1/2/2/4/8 */
+#endif
+#if defined(CONFIG_OMAP_ARM_168MHZ)
+	{ 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */
+#endif
+#if defined(CONFIG_OMAP_ARM_150MHZ)
+	{ 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */
+#endif
+#if defined(CONFIG_OMAP_ARM_120MHZ)
+	{ 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */
+#endif
+#if defined(CONFIG_OMAP_ARM_96MHZ)
+	{  96000000, 12000000,  96000000, 0x0005, 0x2410 }, /* 1/1/1/1/2/2 */
+#endif
+#if defined(CONFIG_OMAP_ARM_60MHZ)
+	{  60000000, 12000000,  60000000, 0x0005, 0x2290 }, /* 1/1/1/1/2/2 */
+#endif
+#if defined(CONFIG_OMAP_ARM_30MHZ)
+	{  30000000, 12000000,  60000000, 0x0555, 0x2290 }, /* 2/2/2/2/2/2 */
+#endif
+	{ 0, 0, 0, 0, 0 },
+};
+
+/*-------------------------------------------------------------------------
+ * Omap1 clocks
+ *-------------------------------------------------------------------------*/
+
+static struct clk ck_ref = {
+	.name		= "ck_ref",
+	.rate		= 12000000,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  ALWAYS_ENABLED,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk ck_dpll1 = {
+	.name		= "ck_dpll1",
+	.parent		= &ck_ref,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  RATE_PROPAGATES | ALWAYS_ENABLED,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct arm_idlect1_clk ck_dpll1out = {
+	.clk = {
+	       	.name		= "ck_dpll1out",
+		.parent		= &ck_dpll1,
+		.flags		= CLOCK_IN_OMAP16XX | CLOCK_IDLE_CONTROL,
+		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.enable_bit	= EN_CKOUT_ARM,
+		.recalc		= &followparent_recalc,
+		.enable		= &omap1_clk_enable,
+		.disable	= &omap1_clk_disable,
+	},
+	.idlect_shift	= 12,
+};
+
+static struct clk arm_ck = {
+	.name		= "arm_ck",
+	.parent		= &ck_dpll1,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  RATE_CKCTL | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.rate_offset	= CKCTL_ARMDIV_OFFSET,
+	.recalc		= &omap1_ckctl_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct arm_idlect1_clk armper_ck = {
+	.clk = {
+		.name		= "armper_ck",
+		.parent		= &ck_dpll1,
+		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+				  RATE_CKCTL | CLOCK_IDLE_CONTROL,
+		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.enable_bit	= EN_PERCK,
+		.rate_offset	= CKCTL_PERDIV_OFFSET,
+		.recalc		= &omap1_ckctl_recalc,
+		.enable		= &omap1_clk_enable,
+		.disable	= &omap1_clk_disable,
+	},
+	.idlect_shift	= 2,
+};
+
+static struct clk arm_gpio_ck = {
+	.name		= "arm_gpio_ck",
+	.parent		= &ck_dpll1,
+	.flags		= CLOCK_IN_OMAP1510,
+	.enable_reg	= (void __iomem *)ARM_IDLECT2,
+	.enable_bit	= EN_GPIOCK,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct arm_idlect1_clk armxor_ck = {
+	.clk = {
+		.name		= "armxor_ck",
+		.parent		= &ck_ref,
+		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+				  CLOCK_IDLE_CONTROL,
+		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.enable_bit	= EN_XORPCK,
+		.recalc		= &followparent_recalc,
+		.enable		= &omap1_clk_enable,
+		.disable	= &omap1_clk_disable,
+	},
+	.idlect_shift	= 1,
+};
+
+static struct arm_idlect1_clk armtim_ck = {
+	.clk = {
+		.name		= "armtim_ck",
+		.parent		= &ck_ref,
+		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+				  CLOCK_IDLE_CONTROL,
+		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.enable_bit	= EN_TIMCK,
+		.recalc		= &followparent_recalc,
+		.enable		= &omap1_clk_enable,
+		.disable	= &omap1_clk_disable,
+	},
+	.idlect_shift	= 9,
+};
+
+static struct arm_idlect1_clk armwdt_ck = {
+	.clk = {
+		.name		= "armwdt_ck",
+		.parent		= &ck_ref,
+		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+				  CLOCK_IDLE_CONTROL,
+		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.enable_bit	= EN_WDTCK,
+		.recalc		= &omap1_watchdog_recalc,
+		.enable		= &omap1_clk_enable,
+		.disable	= &omap1_clk_disable,
+	},
+	.idlect_shift	= 0,
+};
+
+static struct clk arminth_ck16xx = {
+	.name		= "arminth_ck",
+	.parent		= &arm_ck,
+	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+	/* Note: On 16xx the frequency can be divided by 2 by programming
+	 * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1
+	 *
+	 * 1510 version is in TC clocks.
+	 */
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk dsp_ck = {
+	.name		= "dsp_ck",
+	.parent		= &ck_dpll1,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  RATE_CKCTL,
+	.enable_reg	= (void __iomem *)ARM_CKCTL,
+	.enable_bit	= EN_DSPCK,
+	.rate_offset	= CKCTL_DSPDIV_OFFSET,
+	.recalc		= &omap1_ckctl_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk dspmmu_ck = {
+	.name		= "dspmmu_ck",
+	.parent		= &ck_dpll1,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  RATE_CKCTL | ALWAYS_ENABLED,
+	.rate_offset	= CKCTL_DSPMMUDIV_OFFSET,
+	.recalc		= &omap1_ckctl_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk dspper_ck = {
+	.name		= "dspper_ck",
+	.parent		= &ck_dpll1,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  RATE_CKCTL | VIRTUAL_IO_ADDRESS,
+	.enable_reg	= (void __iomem *)DSP_IDLECT2,
+	.enable_bit	= EN_PERCK,
+	.rate_offset	= CKCTL_PERDIV_OFFSET,
+	.recalc		= &omap1_ckctl_recalc_dsp_domain,
+	.set_rate	= &omap1_clk_set_rate_dsp_domain,
+	.enable		= &omap1_clk_enable_dsp_domain,
+	.disable	= &omap1_clk_disable_dsp_domain,
+};
+
+static struct clk dspxor_ck = {
+	.name		= "dspxor_ck",
+	.parent		= &ck_ref,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  VIRTUAL_IO_ADDRESS,
+	.enable_reg	= (void __iomem *)DSP_IDLECT2,
+	.enable_bit	= EN_XORPCK,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable_dsp_domain,
+	.disable	= &omap1_clk_disable_dsp_domain,
+};
+
+static struct clk dsptim_ck = {
+	.name		= "dsptim_ck",
+	.parent		= &ck_ref,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  VIRTUAL_IO_ADDRESS,
+	.enable_reg	= (void __iomem *)DSP_IDLECT2,
+	.enable_bit	= EN_DSPTIMCK,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable_dsp_domain,
+	.disable	= &omap1_clk_disable_dsp_domain,
+};
+
+/* Tie ARM_IDLECT1:IDLIF_ARM to this logical clock structure */
+static struct arm_idlect1_clk tc_ck = {
+	.clk = {
+		.name		= "tc_ck",
+		.parent		= &ck_dpll1,
+		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+				  CLOCK_IN_OMAP730 | RATE_CKCTL |
+				  RATE_PROPAGATES | ALWAYS_ENABLED |
+				  CLOCK_IDLE_CONTROL,
+		.rate_offset	= CKCTL_TCDIV_OFFSET,
+		.recalc		= &omap1_ckctl_recalc,
+		.enable		= &omap1_clk_enable,
+		.disable	= &omap1_clk_disable,
+	},
+	.idlect_shift	= 6,
+};
+
+static struct clk arminth_ck1510 = {
+	.name		= "arminth_ck",
+	.parent		= &tc_ck.clk,
+	.flags		= CLOCK_IN_OMAP1510 | ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+	/* Note: On 1510 the frequency follows TC_CK
+	 *
+	 * 16xx version is in MPU clocks.
+	 */
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk tipb_ck = {
+	/* No-idle controlled by "tc_ck" */
+	.name		= "tibp_ck",
+	.parent		= &tc_ck.clk,
+	.flags		= CLOCK_IN_OMAP1510 | ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk l3_ocpi_ck = {
+	/* No-idle controlled by "tc_ck" */
+	.name		= "l3_ocpi_ck",
+	.parent		= &tc_ck.clk,
+	.flags		= CLOCK_IN_OMAP16XX,
+	.enable_reg	= (void __iomem *)ARM_IDLECT3,
+	.enable_bit	= EN_OCPI_CK,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk tc1_ck = {
+	.name		= "tc1_ck",
+	.parent		= &tc_ck.clk,
+	.flags		= CLOCK_IN_OMAP16XX,
+	.enable_reg	= (void __iomem *)ARM_IDLECT3,
+	.enable_bit	= EN_TC1_CK,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk tc2_ck = {
+	.name		= "tc2_ck",
+	.parent		= &tc_ck.clk,
+	.flags		= CLOCK_IN_OMAP16XX,
+	.enable_reg	= (void __iomem *)ARM_IDLECT3,
+	.enable_bit	= EN_TC2_CK,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk dma_ck = {
+	/* No-idle controlled by "tc_ck" */
+	.name		= "dma_ck",
+	.parent		= &tc_ck.clk,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk dma_lcdfree_ck = {
+	.name		= "dma_lcdfree_ck",
+	.parent		= &tc_ck.clk,
+	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct arm_idlect1_clk api_ck = {
+	.clk = {
+		.name		= "api_ck",
+		.parent		= &tc_ck.clk,
+		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+				  CLOCK_IDLE_CONTROL,
+		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.enable_bit	= EN_APICK,
+		.recalc		= &followparent_recalc,
+		.enable		= &omap1_clk_enable,
+		.disable	= &omap1_clk_disable,
+	},
+	.idlect_shift	= 8,
+};
+
+static struct arm_idlect1_clk lb_ck = {
+	.clk = {
+		.name		= "lb_ck",
+		.parent		= &tc_ck.clk,
+		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IDLE_CONTROL,
+		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.enable_bit	= EN_LBCK,
+		.recalc		= &followparent_recalc,
+		.enable		= &omap1_clk_enable,
+		.disable	= &omap1_clk_disable,
+	},
+	.idlect_shift	= 4,
+};
+
+static struct clk rhea1_ck = {
+	.name		= "rhea1_ck",
+	.parent		= &tc_ck.clk,
+	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk rhea2_ck = {
+	.name		= "rhea2_ck",
+	.parent		= &tc_ck.clk,
+	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk lcd_ck_16xx = {
+	.name		= "lcd_ck",
+	.parent		= &ck_dpll1,
+	.flags		= CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP730 | RATE_CKCTL,
+	.enable_reg	= (void __iomem *)ARM_IDLECT2,
+	.enable_bit	= EN_LCDCK,
+	.rate_offset	= CKCTL_LCDDIV_OFFSET,
+	.recalc		= &omap1_ckctl_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct arm_idlect1_clk lcd_ck_1510 = {
+	.clk = {
+		.name		= "lcd_ck",
+		.parent		= &ck_dpll1,
+		.flags		= CLOCK_IN_OMAP1510 | RATE_CKCTL |
+				  CLOCK_IDLE_CONTROL,
+		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.enable_bit	= EN_LCDCK,
+		.rate_offset	= CKCTL_LCDDIV_OFFSET,
+		.recalc		= &omap1_ckctl_recalc,
+		.enable		= &omap1_clk_enable,
+		.disable	= &omap1_clk_disable,
+	},
+	.idlect_shift	= 3,
+};
+
+static struct clk uart1_1510 = {
+	.name		= "uart1_ck",
+	/* Direct from ULPD, no real parent */
+	.parent		= &armper_ck.clk,
+	.rate		= 12000000,
+	.flags		= CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT |
+			  ALWAYS_ENABLED | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+	.enable_bit	= 29,	/* Chooses between 12MHz and 48MHz */
+	.set_rate	= &omap1_set_uart_rate,
+	.recalc		= &omap1_uart_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct uart_clk uart1_16xx = {
+	.clk	= {
+		.name		= "uart1_ck",
+		/* Direct from ULPD, no real parent */
+		.parent		= &armper_ck.clk,
+		.rate		= 48000000,
+		.flags		= CLOCK_IN_OMAP16XX | RATE_FIXED |
+				  ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+		.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+		.enable_bit	= 29,
+		.enable		= &omap1_clk_enable_uart_functional,
+		.disable	= &omap1_clk_disable_uart_functional,
+	},
+	.sysc_addr	= 0xfffb0054,
+};
+
+static struct clk uart2_ck = {
+	.name		= "uart2_ck",
+	/* Direct from ULPD, no real parent */
+	.parent		= &armper_ck.clk,
+	.rate		= 12000000,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  ENABLE_REG_32BIT | ALWAYS_ENABLED |
+			  CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+	.enable_bit	= 30,	/* Chooses between 12MHz and 48MHz */
+	.set_rate	= &omap1_set_uart_rate,
+	.recalc		= &omap1_uart_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk uart3_1510 = {
+	.name		= "uart3_ck",
+	/* Direct from ULPD, no real parent */
+	.parent		= &armper_ck.clk,
+	.rate		= 12000000,
+	.flags		= CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT |
+			  ALWAYS_ENABLED | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+	.enable_bit	= 31,	/* Chooses between 12MHz and 48MHz */
+	.set_rate	= &omap1_set_uart_rate,
+	.recalc		= &omap1_uart_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct uart_clk uart3_16xx = {
+	.clk	= {
+		.name		= "uart3_ck",
+		/* Direct from ULPD, no real parent */
+		.parent		= &armper_ck.clk,
+		.rate		= 48000000,
+		.flags		= CLOCK_IN_OMAP16XX | RATE_FIXED |
+				  ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+		.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+		.enable_bit	= 31,
+		.enable		= &omap1_clk_enable_uart_functional,
+		.disable	= &omap1_clk_disable_uart_functional,
+	},
+	.sysc_addr	= 0xfffb9854,
+};
+
+static struct clk usb_clko = {	/* 6 MHz output on W4_USB_CLKO */
+	.name		= "usb_clko",
+	/* Direct from ULPD, no parent */
+	.rate		= 6000000,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  RATE_FIXED | ENABLE_REG_32BIT,
+	.enable_reg	= (void __iomem *)ULPD_CLOCK_CTRL,
+	.enable_bit	= USB_MCLK_EN_BIT,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk usb_hhc_ck1510 = {
+	.name		= "usb_hhc_ck",
+	/* Direct from ULPD, no parent */
+	.rate		= 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
+	.flags		= CLOCK_IN_OMAP1510 |
+			  RATE_FIXED | ENABLE_REG_32BIT,
+	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+	.enable_bit	= USB_HOST_HHC_UHOST_EN,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk usb_hhc_ck16xx = {
+	.name		= "usb_hhc_ck",
+	/* Direct from ULPD, no parent */
+	.rate		= 48000000,
+	/* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
+	.flags		= CLOCK_IN_OMAP16XX |
+			  RATE_FIXED | ENABLE_REG_32BIT,
+	.enable_reg	= (void __iomem *)OTG_BASE + 0x08 /* OTG_SYSCON_2 */,
+	.enable_bit	= 8 /* UHOST_EN */,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk usb_dc_ck = {
+	.name		= "usb_dc_ck",
+	/* Direct from ULPD, no parent */
+	.rate		= 48000000,
+	.flags		= CLOCK_IN_OMAP16XX | RATE_FIXED,
+	.enable_reg	= (void __iomem *)SOFT_REQ_REG,
+	.enable_bit	= 4,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk mclk_1510 = {
+	.name		= "mclk",
+	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
+	.rate		= 12000000,
+	.flags		= CLOCK_IN_OMAP1510 | RATE_FIXED,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk mclk_16xx = {
+	.name		= "mclk",
+	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
+	.flags		= CLOCK_IN_OMAP16XX,
+	.enable_reg	= (void __iomem *)COM_CLK_DIV_CTRL_SEL,
+	.enable_bit	= COM_ULPD_PLL_CLK_REQ,
+	.set_rate	= &omap1_set_ext_clk_rate,
+	.round_rate	= &omap1_round_ext_clk_rate,
+	.init		= &omap1_init_ext_clk,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk bclk_1510 = {
+	.name		= "bclk",
+	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
+	.rate		= 12000000,
+	.flags		= CLOCK_IN_OMAP1510 | RATE_FIXED,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk bclk_16xx = {
+	.name		= "bclk",
+	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
+	.flags		= CLOCK_IN_OMAP16XX,
+	.enable_reg	= (void __iomem *)SWD_CLK_DIV_CTRL_SEL,
+	.enable_bit	= SWD_ULPD_PLL_CLK_REQ,
+	.set_rate	= &omap1_set_ext_clk_rate,
+	.round_rate	= &omap1_round_ext_clk_rate,
+	.init		= &omap1_init_ext_clk,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk mmc1_ck = {
+	.name		= "mmc1_ck",
+	/* Functional clock is direct from ULPD, interface clock is ARMPER */
+	.parent		= &armper_ck.clk,
+	.rate		= 48000000,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+	.enable_bit	= 23,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk mmc2_ck = {
+	.name		= "mmc2_ck",
+	/* Functional clock is direct from ULPD, interface clock is ARMPER */
+	.parent		= &armper_ck.clk,
+	.rate		= 48000000,
+	.flags		= CLOCK_IN_OMAP16XX |
+			  RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+	.enable_bit	= 20,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk virtual_ck_mpu = {
+	.name		= "mpu",
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  VIRTUAL_CLOCK | ALWAYS_ENABLED,
+	.parent		= &arm_ck, /* Is smarter alias for */
+	.recalc		= &followparent_recalc,
+	.set_rate	= &omap1_select_table_rate,
+	.round_rate	= &omap1_round_to_table_rate,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk * onchip_clks[] = {
+	/* non-ULPD clocks */
+	&ck_ref,
+	&ck_dpll1,
+	/* CK_GEN1 clocks */
+	&ck_dpll1out.clk,
+	&arm_ck,
+	&armper_ck.clk,
+	&arm_gpio_ck,
+	&armxor_ck.clk,
+	&armtim_ck.clk,
+	&armwdt_ck.clk,
+	&arminth_ck1510,  &arminth_ck16xx,
+	/* CK_GEN2 clocks */
+	&dsp_ck,
+	&dspmmu_ck,
+	&dspper_ck,
+	&dspxor_ck,
+	&dsptim_ck,
+	/* CK_GEN3 clocks */
+	&tc_ck.clk,
+	&tipb_ck,
+	&l3_ocpi_ck,
+	&tc1_ck,
+	&tc2_ck,
+	&dma_ck,
+	&dma_lcdfree_ck,
+	&api_ck.clk,
+	&lb_ck.clk,
+	&rhea1_ck,
+	&rhea2_ck,
+	&lcd_ck_16xx,
+	&lcd_ck_1510.clk,
+	/* ULPD clocks */
+	&uart1_1510,
+	&uart1_16xx.clk,
+	&uart2_ck,
+	&uart3_1510,
+	&uart3_16xx.clk,
+	&usb_clko,
+	&usb_hhc_ck1510, &usb_hhc_ck16xx,
+	&usb_dc_ck,
+	&mclk_1510,  &mclk_16xx,
+	&bclk_1510,  &bclk_16xx,
+	&mmc1_ck,
+	&mmc2_ck,
+	/* Virtual clocks */
+	&virtual_ck_mpu,
+};
+
+#endif
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index e8b3981444cd..ecbc47514adc 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -13,7 +13,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/hardware.h>
 #include <asm/io.h>
@@ -25,56 +25,7 @@
 #include <asm/arch/mux.h>
 #include <asm/arch/gpio.h>
 
-
-static void omap_nop_release(struct device *dev)
-{
-        /* Nothing */
-}
-
-/*-------------------------------------------------------------------------*/
-
-#if	defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
-
-#define	OMAP_I2C_BASE		0xfffb3800
-
-static struct resource i2c_resources[] = {
-	{
-		.start		= OMAP_I2C_BASE,
-		.end		= OMAP_I2C_BASE + 0x3f,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= INT_I2C,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-/* DMA not used; works around erratum writing to non-empty i2c fifo */
-
-static struct platform_device omap_i2c_device = {
-        .name           = "i2c_omap",
-        .id             = -1,
-        .dev = {
-                .release        = omap_nop_release,
-        },
-	.num_resources	= ARRAY_SIZE(i2c_resources),
-	.resource	= i2c_resources,
-};
-
-static void omap_init_i2c(void)
-{
-	/* FIXME define and use a boot tag, in case of boards that
-	 * either don't wire up I2C, or chips that mux it differently...
-	 * it can include clocking and address info, maybe more.
-	 */
-	omap_cfg_reg(I2C_SCL);
-	omap_cfg_reg(I2C_SDA);
-
-	(void) platform_device_register(&omap_i2c_device);
-}
-#else
-static inline void omap_init_i2c(void) {}
-#endif
+extern void omap_nop_release(struct device *dev);
 
 /*-------------------------------------------------------------------------*/
 
@@ -110,137 +61,6 @@ static inline void omap_init_irda(void) {}
 
 /*-------------------------------------------------------------------------*/
 
-#if	defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
-
-#define	OMAP_MMC1_BASE		0xfffb7800
-#define	OMAP_MMC2_BASE		0xfffb7c00	/* omap16xx only */
-
-static struct omap_mmc_conf mmc1_conf;
-
-static u64 mmc1_dmamask = 0xffffffff;
-
-static struct resource mmc1_resources[] = {
-	{
-		.start		= IO_ADDRESS(OMAP_MMC1_BASE),
-		.end		= IO_ADDRESS(OMAP_MMC1_BASE) + 0x7f,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= INT_MMC,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device mmc_omap_device1 = {
-	.name		= "mmci-omap",
-	.id		= 1,
-	.dev = {
-		.release	= omap_nop_release,
-		.dma_mask	= &mmc1_dmamask,
-		.platform_data	= &mmc1_conf,
-	},
-	.num_resources	= ARRAY_SIZE(mmc1_resources),
-	.resource	= mmc1_resources,
-};
-
-#ifdef	CONFIG_ARCH_OMAP16XX
-
-static struct omap_mmc_conf mmc2_conf;
-
-static u64 mmc2_dmamask = 0xffffffff;
-
-static struct resource mmc2_resources[] = {
-	{
-		.start		= IO_ADDRESS(OMAP_MMC2_BASE),
-		.end		= IO_ADDRESS(OMAP_MMC2_BASE) + 0x7f,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= INT_1610_MMC2,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device mmc_omap_device2 = {
-	.name		= "mmci-omap",
-	.id		= 2,
-	.dev = {
-		.release	= omap_nop_release,
-		.dma_mask	= &mmc2_dmamask,
-		.platform_data	= &mmc2_conf,
-	},
-	.num_resources	= ARRAY_SIZE(mmc2_resources),
-	.resource	= mmc2_resources,
-};
-#endif
-
-static void __init omap_init_mmc(void)
-{
-	const struct omap_mmc_config	*mmc_conf;
-	const struct omap_mmc_conf	*mmc;
-
-	/* NOTE:  assumes MMC was never (wrongly) enabled */
-	mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
-	if (!mmc_conf)
-		return;
-
-	/* block 1 is always available and has just one pinout option */
-	mmc = &mmc_conf->mmc[0];
-	if (mmc->enabled) {
-		omap_cfg_reg(MMC_CMD);
-		omap_cfg_reg(MMC_CLK);
-		omap_cfg_reg(MMC_DAT0);
-		if (cpu_is_omap1710()) {
-	              omap_cfg_reg(M15_1710_MMC_CLKI);
-	              omap_cfg_reg(P19_1710_MMC_CMDDIR);
-	              omap_cfg_reg(P20_1710_MMC_DATDIR0);
-	        }
-		if (mmc->wire4) {
-			omap_cfg_reg(MMC_DAT1);
-			/* NOTE:  DAT2 can be on W10 (here) or M15 */
-			if (!mmc->nomux)
-				omap_cfg_reg(MMC_DAT2);
-			omap_cfg_reg(MMC_DAT3);
-		}
-		mmc1_conf = *mmc;
-		(void) platform_device_register(&mmc_omap_device1);
-	}
-
-#ifdef	CONFIG_ARCH_OMAP16XX
-	/* block 2 is on newer chips, and has many pinout options */
-	mmc = &mmc_conf->mmc[1];
-	if (mmc->enabled) {
-		if (!mmc->nomux) {
-			omap_cfg_reg(Y8_1610_MMC2_CMD);
-			omap_cfg_reg(Y10_1610_MMC2_CLK);
-			omap_cfg_reg(R18_1610_MMC2_CLKIN);
-			omap_cfg_reg(W8_1610_MMC2_DAT0);
-			if (mmc->wire4) {
-				omap_cfg_reg(V8_1610_MMC2_DAT1);
-				omap_cfg_reg(W15_1610_MMC2_DAT2);
-				omap_cfg_reg(R10_1610_MMC2_DAT3);
-			}
-
-			/* These are needed for the level shifter */
-			omap_cfg_reg(V9_1610_MMC2_CMDDIR);
-			omap_cfg_reg(V5_1610_MMC2_DATDIR0);
-			omap_cfg_reg(W19_1610_MMC2_DATDIR1);
-		}
-
-		/* Feedback clock must be set on OMAP-1710 MMC2 */
-		if (cpu_is_omap1710())
-			omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
-				     MOD_CONF_CTRL_1);
-		mmc2_conf = *mmc;
-		(void) platform_device_register(&mmc_omap_device2);
-	}
-#endif
-	return;
-}
-#else
-static inline void omap_init_mmc(void) {}
-#endif
-
 #if	defined(CONFIG_OMAP_RTC) || defined(CONFIG_OMAP_RTC)
 
 #define	OMAP_RTC_BASE		0xfffb4800
@@ -279,38 +99,6 @@ static void omap_init_rtc(void)
 static inline void omap_init_rtc(void) {}
 #endif
 
-/*-------------------------------------------------------------------------*/
-
-#if	defined(CONFIG_OMAP16XX_WATCHDOG) || defined(CONFIG_OMAP16XX_WATCHDOG_MODULE)
-
-#define	OMAP_WDT_BASE		0xfffeb000
-
-static struct resource wdt_resources[] = {
-	{
-		.start		= OMAP_WDT_BASE,
-		.end		= OMAP_WDT_BASE + 0x4f,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device omap_wdt_device = {
-	.name	   = "omap1610_wdt",
-	.id	     = -1,
-	.dev = {
-		.release	= omap_nop_release,
-	},
-	.num_resources	= ARRAY_SIZE(wdt_resources),
-	.resource	= wdt_resources,
-};
-
-static void omap_init_wdt(void)
-{
-	(void) platform_device_register(&omap_wdt_device);
-}
-#else
-static inline void omap_init_wdt(void) {}
-#endif
-
 
 /*-------------------------------------------------------------------------*/
 
@@ -334,18 +122,15 @@ static inline void omap_init_wdt(void) {}
  * may be handled by the boot loader, and drivers should expect it will
  * normally have been done by the time they're probed.
  */
-static int __init omap_init_devices(void)
+static int __init omap1_init_devices(void)
 {
 	/* please keep these calls, and their implementations above,
 	 * in alphabetical order so they're easier to sort through.
 	 */
-	omap_init_i2c();
 	omap_init_irda();
-	omap_init_mmc();
 	omap_init_rtc();
-	omap_init_wdt();
 
 	return 0;
 }
-arch_initcall(omap_init_devices);
+arch_initcall(omap1_init_devices);
 
diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
index 986c3b7e09bb..5c637c048368 100644
--- a/arch/arm/mach-omap1/id.c
+++ b/arch/arm/mach-omap1/id.c
@@ -18,6 +18,13 @@
 
 #include <asm/io.h>
 
+#define OMAP_DIE_ID_0		0xfffe1800
+#define OMAP_DIE_ID_1		0xfffe1804
+#define OMAP_PRODUCTION_ID_0	0xfffe2000
+#define OMAP_PRODUCTION_ID_1	0xfffe2004
+#define OMAP32_ID_0		0xfffed400
+#define OMAP32_ID_1		0xfffed404
+
 struct omap_id {
 	u16	jtag_id;	/* Used to determine OMAP type */
 	u8	die_rev;	/* Processor revision */
@@ -27,6 +34,7 @@ struct omap_id {
 
 /* Register values to detect the OMAP version */
 static struct omap_id omap_ids[] __initdata = {
+	{ .jtag_id = 0xb574, .die_rev = 0x2, .omap_id = 0x03310315, .type = 0x03100000},
 	{ .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300100},
 	{ .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300300},
 	{ .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type = 0x15100000},
@@ -164,6 +172,7 @@ void __init omap_check_revision(void)
 	case 0x07:
 		system_rev |= 0x07;
 		break;
+	case 0x03:
 	case 0x15:
 		system_rev |= 0x15;
 		break;
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index eb8261d7dead..a7a19f75b9e1 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -15,9 +15,10 @@
 
 #include <asm/mach/map.h>
 #include <asm/io.h>
+#include <asm/arch/mux.h>
 #include <asm/arch/tc.h>
 
-extern int clk_init(void);
+extern int omap1_clk_init(void);
 extern void omap_check_revision(void);
 extern void omap_sram_init(void);
 
@@ -26,27 +27,59 @@ extern void omap_sram_init(void);
  * default mapping provided here.
  */
 static struct map_desc omap_io_desc[] __initdata = {
- { IO_VIRT,      	IO_PHYS,             IO_SIZE,        	   MT_DEVICE },
+	{
+		.virtual	= IO_VIRT,
+		.pfn		= __phys_to_pfn(IO_PHYS),
+		.length		= IO_SIZE,
+		.type		= MT_DEVICE
+	}
 };
 
 #ifdef CONFIG_ARCH_OMAP730
 static struct map_desc omap730_io_desc[] __initdata = {
- { OMAP730_DSP_BASE,    OMAP730_DSP_START,    OMAP730_DSP_SIZE,    MT_DEVICE },
- { OMAP730_DSPREG_BASE, OMAP730_DSPREG_START, OMAP730_DSPREG_SIZE, MT_DEVICE },
+	{
+		.virtual	= OMAP730_DSP_BASE,
+		.pfn		= __phys_to_pfn(OMAP730_DSP_START),
+		.length		= OMAP730_DSP_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= OMAP730_DSPREG_BASE,
+		.pfn		= __phys_to_pfn(OMAP730_DSPREG_START),
+		.length		= OMAP730_DSPREG_SIZE,
+		.type		= MT_DEVICE
+	}
 };
 #endif
 
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 static struct map_desc omap1510_io_desc[] __initdata = {
- { OMAP1510_DSP_BASE,    OMAP1510_DSP_START,    OMAP1510_DSP_SIZE,    MT_DEVICE },
- { OMAP1510_DSPREG_BASE, OMAP1510_DSPREG_START, OMAP1510_DSPREG_SIZE, MT_DEVICE },
+	{
+		.virtual	= OMAP1510_DSP_BASE,
+		.pfn		= __phys_to_pfn(OMAP1510_DSP_START),
+		.length		= OMAP1510_DSP_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= OMAP1510_DSPREG_BASE,
+		.pfn		= __phys_to_pfn(OMAP1510_DSPREG_START),
+		.length		= OMAP1510_DSPREG_SIZE,
+		.type		= MT_DEVICE
+	}
 };
 #endif
 
 #if defined(CONFIG_ARCH_OMAP16XX)
 static struct map_desc omap16xx_io_desc[] __initdata = {
- { OMAP16XX_DSP_BASE,    OMAP16XX_DSP_START,    OMAP16XX_DSP_SIZE,    MT_DEVICE },
- { OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_START, OMAP16XX_DSPREG_SIZE, MT_DEVICE },
+	{
+		.virtual	= OMAP16XX_DSP_BASE,
+		.pfn		= __phys_to_pfn(OMAP16XX_DSP_START),
+		.length		= OMAP16XX_DSP_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= OMAP16XX_DSPREG_BASE,
+		.pfn		= __phys_to_pfn(OMAP16XX_DSPREG_START),
+		.length		= OMAP16XX_DSPREG_SIZE,
+		.type		= MT_DEVICE
+	}
 };
 #endif
 
@@ -66,7 +99,7 @@ static void __init _omap_map_io(void)
 		iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc));
 	}
 #endif
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
 	}
@@ -87,7 +120,7 @@ static void __init _omap_map_io(void)
 
 	/* Must init clocks early to assure that timer interrupt works
 	 */
-	clk_init();
+	omap1_clk_init();
 }
 
 /*
@@ -95,7 +128,9 @@ static void __init _omap_map_io(void)
  */
 void __init omap_map_common_io(void)
 {
-	if (!initialized)
+	if (!initialized) {
 		_omap_map_io();
+		omap1_mux_init();
+	}
 }
 
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index 192ce6055faa..ed65a7d2e941 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -47,6 +47,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/arch/gpio.h>
+#include <asm/arch/cpu.h>
 
 #include <asm/io.h>
 
@@ -147,11 +148,15 @@ static struct omap_irq_bank omap730_irq_banks[] = {
 };
 #endif
 
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 static struct omap_irq_bank omap1510_irq_banks[] = {
 	{ .base_reg = OMAP_IH1_BASE, 		.trigger_map = 0xb3febfff },
 	{ .base_reg = OMAP_IH2_BASE, 		.trigger_map = 0xffbfffed },
 };
+static struct omap_irq_bank omap310_irq_banks[] = {
+	{ .base_reg = OMAP_IH1_BASE, 		.trigger_map = 0xb3faefc3 },
+	{ .base_reg = OMAP_IH2_BASE, 		.trigger_map = 0x65b3c061 },
+};
 #endif
 
 #if defined(CONFIG_ARCH_OMAP16XX)
@@ -181,11 +186,15 @@ void __init omap_init_irq(void)
 		irq_bank_count = ARRAY_SIZE(omap730_irq_banks);
 	}
 #endif
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		irq_banks = omap1510_irq_banks;
 		irq_bank_count = ARRAY_SIZE(omap1510_irq_banks);
 	}
+	if (cpu_is_omap310()) {
+		irq_banks = omap310_irq_banks;
+		irq_bank_count = ARRAY_SIZE(omap310_irq_banks);
+	}
 #endif
 #if defined(CONFIG_ARCH_OMAP16XX)
 	if (cpu_is_omap16xx()) {
@@ -226,9 +235,11 @@ void __init omap_init_irq(void)
 	}
 
 	/* Unmask level 2 handler */
-	if (cpu_is_omap730()) {
+
+	if (cpu_is_omap730())
 		omap_unmask_irq(INT_730_IH2_IRQ);
-	} else {
-		omap_unmask_irq(INT_IH2_IRQ);
-	}
+	else if (cpu_is_omap1510())
+		omap_unmask_irq(INT_1510_IH2_IRQ);
+	else if (cpu_is_omap16xx())
+		omap_unmask_irq(INT_1610_IH2_IRQ);
 }
diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c
index be283cda63dd..650650815915 100644
--- a/arch/arm/mach-omap1/leds-h2p2-debug.c
+++ b/arch/arm/mach-omap1/leds-h2p2-debug.c
@@ -13,12 +13,12 @@
 #include <linux/init.h>
 #include <linux/kernel_stat.h>
 #include <linux/sched.h>
-#include <linux/version.h>
 
 #include <asm/io.h>
 #include <asm/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
+#include <asm/mach-types.h>
 
 #include <asm/arch/fpga.h>
 #include <asm/arch/gpio.h>
@@ -64,14 +64,19 @@ void h2p2_dbg_leds_event(led_event_t evt)
 	case led_stop:
 	case led_halted:
 		/* all leds off during suspend or shutdown */
-		omap_set_gpio_dataout(GPIO_TIMER, 0);
-		omap_set_gpio_dataout(GPIO_IDLE, 0);
+
+		if (! machine_is_omap_perseus2()) {
+			omap_set_gpio_dataout(GPIO_TIMER, 0);
+			omap_set_gpio_dataout(GPIO_IDLE, 0);
+		}
+
 		__raw_writew(~0, &fpga->leds);
 		led_state &= ~LED_STATE_ENABLED;
 		if (evt == led_halted) {
 			iounmap(fpga);
 			fpga = NULL;
 		}
+
 		goto done;
 
 	case led_claim:
@@ -86,18 +91,37 @@ void h2p2_dbg_leds_event(led_event_t evt)
 #ifdef CONFIG_LEDS_TIMER
 	case led_timer:
 		led_state ^= LED_TIMER_ON;
-		omap_set_gpio_dataout(GPIO_TIMER, led_state & LED_TIMER_ON);
-		goto done;
+
+		if (machine_is_omap_perseus2())
+			hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER;
+		else {
+			omap_set_gpio_dataout(GPIO_TIMER, led_state & LED_TIMER_ON);
+			goto done;
+		}
+
+		break;
 #endif
 
 #ifdef CONFIG_LEDS_CPU
 	case led_idle_start:
-		omap_set_gpio_dataout(GPIO_IDLE, 1);
-		goto done;
+		if (machine_is_omap_perseus2())
+			hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE;
+		else {
+			omap_set_gpio_dataout(GPIO_IDLE, 1);
+			goto done;
+		}
+
+		break;
 
 	case led_idle_end:
-		omap_set_gpio_dataout(GPIO_IDLE, 0);
-		goto done;
+		if (machine_is_omap_perseus2())
+			hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE;
+		else {
+			omap_set_gpio_dataout(GPIO_IDLE, 0);
+			goto done;
+		}
+
+		break;
 #endif
 
 	case led_green_on:
@@ -136,7 +160,7 @@ void h2p2_dbg_leds_event(led_event_t evt)
 	/*
 	 *  Actually burn the LEDs
 	 */
-	if (led_state & LED_STATE_CLAIMED)
+	if (led_state & LED_STATE_ENABLED)
 		__raw_writew(~hw_led_state, &fpga->leds);
 
 done:
diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c
index 5c6b1bb6e722..3f9dcac4fd41 100644
--- a/arch/arm/mach-omap1/leds.c
+++ b/arch/arm/mach-omap1/leds.c
@@ -33,7 +33,6 @@ omap_leds_init(void)
 
 	if (machine_is_omap_h2()
 			|| machine_is_omap_h3()
-			|| machine_is_omap_perseus2()
 #ifdef	CONFIG_OMAP_OSK_MISTRAL
 			|| machine_is_omap_osk()
 #endif
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
new file mode 100644
index 000000000000..d4b8d624e742
--- /dev/null
+++ b/arch/arm/mach-omap1/mux.c
@@ -0,0 +1,289 @@
+/*
+ * linux/arch/arm/mach-omap1/mux.c
+ *
+ * OMAP1 pin multiplexing configurations
+ *
+ * Copyright (C) 2003 - 2005 Nokia Corporation
+ *
+ * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <linux/spinlock.h>
+
+#include <asm/arch/mux.h>
+
+#ifdef CONFIG_OMAP_MUX
+
+#ifdef CONFIG_ARCH_OMAP730
+struct pin_config __initdata_or_module omap730_pins[] = {
+MUX_CFG_730("E2_730_KBR0",	12,   21,    0,	  0,   20,   1,	  NA,	 0,  0)
+MUX_CFG_730("J7_730_KBR1",	12,   25,    0,	  0,   24,   1,	  NA,	 0,  0)
+MUX_CFG_730("E1_730_KBR2",	12,   29,    0,	  0,   28,   1,	  NA,	 0,  0)
+MUX_CFG_730("F3_730_KBR3",	13,    1,    0,	  0,   0,    1,	  NA,	 0,  0)
+MUX_CFG_730("D2_730_KBR4",	13,    5,    0,	  0,   4,    1,	  NA,	 0,  0)
+MUX_CFG_730("C2_730_KBC0",	13,    9,    0,	  0,	8,   1,	  NA,	 0,  0)
+MUX_CFG_730("D3_730_KBC1",	13,   13,    0,	  0,   12,   1,	  NA,	 0,  0)
+MUX_CFG_730("E4_730_KBC2",	13,   17,    0,	  0,   16,   1,	  NA,	 0,  0)
+MUX_CFG_730("F4_730_KBC3",	13,   21,    0,	  0,   20,   1,	  NA,	 0,  0)
+MUX_CFG_730("E3_730_KBC4",	13,   25,    0,	  0,   24,   1,	  NA,	 0,  0)
+};
+#endif
+
+#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
+struct pin_config __initdata_or_module omap1xxx_pins[] = {
+/*
+ *	 description		mux  mode   mux	 pull pull  pull  pu_pd	 pu  dbg
+ *				reg  offset mode reg  bit   ena	  reg
+ */
+MUX_CFG("UART1_TX",		 9,   21,    1,	  2,   3,   0,	 NA,	 0,  0)
+MUX_CFG("UART1_RTS",		 9,   12,    1,	  2,   0,   0,	 NA,	 0,  0)
+
+/* UART2 (COM_UART_GATING), conflicts with USB2 */
+MUX_CFG("UART2_TX",		 C,   27,    1,	  3,   3,   0,	 NA,	 0,  0)
+MUX_CFG("UART2_RX",		 C,   18,    0,	  3,   1,   1,	 NA,	 0,  0)
+MUX_CFG("UART2_CTS",		 C,   21,    0,	  3,   1,   1,	 NA,	 0,  0)
+MUX_CFG("UART2_RTS",		 C,   24,    1,	  3,   2,   0,	 NA,	 0,  0)
+
+/* UART3 (GIGA_UART_GATING) */
+MUX_CFG("UART3_TX",		 6,    0,    1,	  0,  30,   0,	 NA,	 0,  0)
+MUX_CFG("UART3_RX",		 6,    3,    0,	  0,  31,   1,	 NA,	 0,  0)
+MUX_CFG("UART3_CTS",		 5,   12,    2,	  0,  24,   0,	 NA,	 0,  0)
+MUX_CFG("UART3_RTS",		 5,   15,    2,	  0,  25,   0,	 NA,	 0,  0)
+MUX_CFG("UART3_CLKREQ",		 9,   27,    0,	  2,   5,   0,	 NA,	 0,  0)
+MUX_CFG("UART3_BCLK",		 A,    0,    0,	  2,   6,   0,	 NA,	 0,  0)
+MUX_CFG("Y15_1610_UART3_RTS",	 A,    0,    1,	  2,   6,   0,	 NA,	 0,  0)
+
+/* PWT & PWL, conflicts with UART3 */
+MUX_CFG("PWT",		 	 6,    0,    2,	  0,  30,   0,	 NA,	 0,  0)
+MUX_CFG("PWL",		 	 6,    3,    1,	  0,  31,   1,	 NA,	 0,  0)
+
+/* USB internal master generic */
+MUX_CFG("R18_USB_VBUS",		 7,    9,    2,	  1,  11,   0,	 NA,	 0,  1)
+MUX_CFG("R18_1510_USB_GPIO0",	 7,    9,    0,	  1,  11,   1,	 NA,	 0,  1)
+/* works around erratum:  W4_USB_PUEN and W4_USB_PUDIS are switched! */
+MUX_CFG("W4_USB_PUEN",		 D,    3,    3,	  3,   5,   1,	 NA,	 0,  1)
+MUX_CFG("W4_USB_CLKO",		 D,    3,    1,	  3,   5,   0,	 NA,	 0,  1)
+MUX_CFG("W4_USB_HIGHZ",		 D,    3,    4,	  3,   5,   0,	  3,	 0,  1)
+MUX_CFG("W4_GPIO58",		 D,    3,    7,	  3,   5,   0,	  3,	 0,  1)
+
+/* USB1 master */
+MUX_CFG("USB1_SUSP",		 8,   27,    2,	  1,  27,   0,	 NA,	 0,  1)
+MUX_CFG("USB1_SE0",		 9,    0,    2,	  1,  28,   0,	 NA,	 0,  1)
+MUX_CFG("W13_1610_USB1_SE0",	 9,    0,    4,	  1,  28,   0,	 NA,	 0,  1)
+MUX_CFG("USB1_TXEN",		 9,    3,    2,	  1,  29,   0,	 NA,	 0,  1)
+MUX_CFG("USB1_TXD",		 9,   24,    1,	  2,   4,   0,	 NA,	 0,  1)
+MUX_CFG("USB1_VP",		 A,    3,    1,	  2,   7,   0,	 NA,	 0,  1)
+MUX_CFG("USB1_VM",		 A,    6,    1,	  2,   8,   0,	 NA,	 0,  1)
+MUX_CFG("USB1_RCV",		 A,    9,    1,	  2,   9,   0,	 NA,	 0,  1)
+MUX_CFG("USB1_SPEED",		 A,   12,    2,	  2,  10,   0,	 NA,	 0,  1)
+MUX_CFG("R13_1610_USB1_SPEED",	 A,   12,    5,	  2,  10,   0,	 NA,	 0,  1)
+MUX_CFG("R13_1710_USB1_SEO",	 A,   12,    5,   2,  10,   0,   NA,     0,  1)
+
+/* USB2 master */
+MUX_CFG("USB2_SUSP",		 B,    3,    1,	  2,  17,   0,	 NA,	 0,  1)
+MUX_CFG("USB2_VP",		 B,    6,    1,	  2,  18,   0,	 NA,	 0,  1)
+MUX_CFG("USB2_TXEN",		 B,    9,    1,	  2,  19,   0,	 NA,	 0,  1)
+MUX_CFG("USB2_VM",		 C,   18,    1,	  3,   0,   0,	 NA,	 0,  1)
+MUX_CFG("USB2_RCV",		 C,   21,    1,	  3,   1,   0,	 NA,	 0,  1)
+MUX_CFG("USB2_SE0",		 C,   24,    2,	  3,   2,   0,	 NA,	 0,  1)
+MUX_CFG("USB2_TXD",		 C,   27,    2,	  3,   3,   0,	 NA,	 0,  1)
+
+/* OMAP-1510 GPIO */
+MUX_CFG("R18_1510_GPIO0",	 7,    9,    0,   1,  11,   1,    0,     0,  1)
+MUX_CFG("R19_1510_GPIO1",	 7,    6,    0,   1,  10,   1,    0,     0,  1)
+MUX_CFG("M14_1510_GPIO2",	 7,    3,    0,   1,   9,   1,    0,     0,  1)
+
+/* OMAP1610 GPIO */
+MUX_CFG("P18_1610_GPIO3",	 7,    0,    0,   1,   8,   0,   NA,     0,  1)
+MUX_CFG("Y15_1610_GPIO17",	 A,    0,    7,   2,   6,   0,   NA,     0,  1)
+
+/* OMAP-1710 GPIO */
+MUX_CFG("R18_1710_GPIO0",        7,    9,    0,   1,  11,   1,    1,     1,  1)
+MUX_CFG("V2_1710_GPIO10",        F,   27,    1,   4,   3,   1,    4,     1,  1)
+MUX_CFG("N21_1710_GPIO14",       6,    9,    0,   1,   1,   1,    1,     1,  1)
+MUX_CFG("W15_1710_GPIO40",       9,   27,    7,   2,   5,   1,    2,     1,  1)
+
+/* MPUIO */
+MUX_CFG("MPUIO2",		 7,   18,    0,	  1,  14,   1,	 NA,	 0,  1)
+MUX_CFG("N15_1610_MPUIO2",	 7,   18,    0,	  1,  14,   1,	  1,	 0,  1)
+MUX_CFG("MPUIO4",		 7,   15,    0,	  1,  13,   1,	 NA,	 0,  1)
+MUX_CFG("MPUIO5",		 7,   12,    0,	  1,  12,   1,	 NA,	 0,  1)
+
+MUX_CFG("T20_1610_MPUIO5",	 7,   12,    0,	  1,  12,   0,	  3,	 0,  1)
+MUX_CFG("W11_1610_MPUIO6",	10,   15,    2,	  3,   8,   0,	  3,	 0,  1)
+MUX_CFG("V10_1610_MPUIO7",	 A,   24,    2,	  2,  14,   0,	  2,	 0,  1)
+MUX_CFG("W11_1610_MPUIO9",	10,   15,    1,	  3,   8,   0,	  3,	 0,  1)
+MUX_CFG("V10_1610_MPUIO10",	 A,   24,    1,	  2,  14,   0,	  2,	 0,  1)
+MUX_CFG("W10_1610_MPUIO11",	 A,   18,    2,	  2,  11,   0,	  2,	 0,  1)
+MUX_CFG("E20_1610_MPUIO13",	 3,   21,    1,	  0,   7,   0,	  0,	 0,  1)
+MUX_CFG("U20_1610_MPUIO14",	 9,    6,    6,	  0,  30,   0,	  0,	 0,  1)
+MUX_CFG("E19_1610_MPUIO15",	 3,   18,    1,	  0,   6,   0,	  0,	 0,  1)
+
+/* MCBSP2 */
+MUX_CFG("MCBSP2_CLKR",		 C,    6,    0,	  2,  27,   1,	 NA,	 0,  1)
+MUX_CFG("MCBSP2_CLKX",		 C,    9,    0,	  2,  29,   1,	 NA,	 0,  1)
+MUX_CFG("MCBSP2_DR",		 C,    0,    0,	  2,  26,   1,	 NA,	 0,  1)
+MUX_CFG("MCBSP2_DX",		 C,   15,    0,	  2,  31,   1,	 NA,	 0,  1)
+MUX_CFG("MCBSP2_FSR",		 C,   12,    0,	  2,  30,   1,	 NA,	 0,  1)
+MUX_CFG("MCBSP2_FSX",		 C,    3,    0,	  2,  27,   1,	 NA,	 0,  1)
+
+/* MCBSP3 NOTE: Mode must 1 for clock */
+MUX_CFG("MCBSP3_CLKX",		 9,    3,    1,	  1,  29,   0,	 NA,	 0,  1)
+
+/* Misc ballouts */
+MUX_CFG("BALLOUT_V8_ARMIO3",	 B,   18,    0,	  2,  25,   1,	 NA,	 0,  1)
+MUX_CFG("N20_HDQ",	       6,   18,    1,   1,   4,   0,    1,     4,  0)
+
+/* OMAP-1610 MMC2 */
+MUX_CFG("W8_1610_MMC2_DAT0",	 B,   21,    6,	  2,  23,   1,	  2,	 1,  1)
+MUX_CFG("V8_1610_MMC2_DAT1",	 B,   27,    6,	  2,  25,   1,	  2,	 1,  1)
+MUX_CFG("W15_1610_MMC2_DAT2",	 9,   12,    6,	  2,   5,   1,	  2,	 1,  1)
+MUX_CFG("R10_1610_MMC2_DAT3",	 B,   18,    6,	  2,  22,   1,	  2,	 1,  1)
+MUX_CFG("Y10_1610_MMC2_CLK",	 B,    3,    6,	  2,  17,   0,	  2,	 0,  1)
+MUX_CFG("Y8_1610_MMC2_CMD",	 B,   24,    6,	  2,  24,   1,	  2,	 1,  1)
+MUX_CFG("V9_1610_MMC2_CMDDIR",	 B,   12,    6,	  2,  20,   0,	  2,	 1,  1)
+MUX_CFG("V5_1610_MMC2_DATDIR0",	 B,   15,    6,	  2,  21,   0,	  2,	 1,  1)
+MUX_CFG("W19_1610_MMC2_DATDIR1", 8,   15,    6,	  1,  23,   0,	  1,	 1,  1)
+MUX_CFG("R18_1610_MMC2_CLKIN",	 7,    9,    6,	  1,  11,   0,	  1,	11,  1)
+
+/* OMAP-1610 External Trace Interface */
+MUX_CFG("M19_1610_ETM_PSTAT0",	 5,   27,    1,	  0,  29,   0,	  0,	 0,  1)
+MUX_CFG("L15_1610_ETM_PSTAT1",	 5,   24,    1,	  0,  28,   0,	  0,	 0,  1)
+MUX_CFG("L18_1610_ETM_PSTAT2",	 5,   21,    1,	  0,  27,   0,	  0,	 0,  1)
+MUX_CFG("L19_1610_ETM_D0",	 5,   18,    1,	  0,  26,   0,	  0,	 0,  1)
+MUX_CFG("J19_1610_ETM_D6",	 5,    0,    1,	  0,  20,   0,	  0,	 0,  1)
+MUX_CFG("J18_1610_ETM_D7",	 5,   27,    1,	  0,  19,   0,	  0,	 0,  1)
+
+/* OMAP16XX GPIO */
+MUX_CFG("P20_1610_GPIO4",	 6,   27,    0,	  1,   7,   0,	  1,	 1,  1)
+MUX_CFG("V9_1610_GPIO7",	 B,   12,    1,	  2,  20,   0,	  2,	 1,  1)
+MUX_CFG("W8_1610_GPIO9",	 B,   21,    0,	  2,  23,   0,	  2,	 1,  1)
+MUX_CFG("N20_1610_GPIO11",       6,   18,    0,   1,   4,   0,    1,     1,  1)
+MUX_CFG("N19_1610_GPIO13",	 6,   12,    0,	  1,   2,   0,	  1,	 1,  1)
+MUX_CFG("P10_1610_GPIO22",	 C,    0,    7,	  2,  26,   0,	  2,	 1,  1)
+MUX_CFG("V5_1610_GPIO24",	 B,   15,    7,	  2,  21,   0,	  2,	 1,  1)
+MUX_CFG("AA20_1610_GPIO_41",	 9,    9,    7,	  1,  31,   0,	  1,	 1,  1)
+MUX_CFG("W19_1610_GPIO48",	 8,   15,    7,   1,  23,   1,    1,     0,  1)
+MUX_CFG("M7_1610_GPIO62",	10,    0,    0,   4,  24,   0,    4,     0,  1)
+MUX_CFG("V14_16XX_GPIO37",	 9,   18,    7,	  2,   2,   0,	  2,	 2,  0)
+MUX_CFG("R9_16XX_GPIO18",	 C,   18,    7,   3,   0,   0,    3,     0,  0)
+MUX_CFG("L14_16XX_GPIO49",	 6,    3,    7,   0,  31,   0,    0,    31,  0)
+
+/* OMAP-1610 uWire */
+MUX_CFG("V19_1610_UWIRE_SCLK",	 8,    6,    0,	  1,  20,   0,	  1,	 1,  1)
+MUX_CFG("U18_1610_UWIRE_SDI",	 8,    0,    0,	  1,  18,   0,	  1,	 1,  1)
+MUX_CFG("W21_1610_UWIRE_SDO",	 8,    3,    0,	  1,  19,   0,	  1,	 1,  1)
+MUX_CFG("N14_1610_UWIRE_CS0",	 8,    9,    1,	  1,  21,   0,	  1,	 1,  1)
+MUX_CFG("P15_1610_UWIRE_CS3",	 8,   12,    1,	  1,  22,   0,	  1,	 1,  1)
+MUX_CFG("N15_1610_UWIRE_CS1",	 7,   18,    2,	  1,  14,   0,	 NA,	 0,  1)
+
+/* OMAP-1610 Flash */
+MUX_CFG("L3_1610_FLASH_CS2B_OE",10,    6,    1,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("M8_1610_FLASH_CS2B_WE",10,    3,    1,	 NA,   0,   0,	 NA,	 0,  1)
+
+/* First MMC interface, same on 1510, 1610 and 1710 */
+MUX_CFG("MMC_CMD",		 A,   27,    0,	  2,  15,   1,	  2,	 1,  1)
+MUX_CFG("MMC_DAT1",		 A,   24,    0,	  2,  14,   1,	  2,	 1,  1)
+MUX_CFG("MMC_DAT2",		 A,   18,    0,	  2,  12,   1,	  2,	 1,  1)
+MUX_CFG("MMC_DAT0",		 B,    0,    0,	  2,  16,   1,	  2,	 1,  1)
+MUX_CFG("MMC_CLK",		 A,   21,    0,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("MMC_DAT3",		10,   15,    0,	  3,   8,   1,	  3,	 1,  1)
+MUX_CFG("M15_1710_MMC_CLKI",	 6,   21,    2,   0,   0,   0,   NA,     0,  1)
+MUX_CFG("P19_1710_MMC_CMDDIR",	 6,   24,    6,   0,   0,   0,   NA,     0,  1)
+MUX_CFG("P20_1710_MMC_DATDIR0",	 6,   27,    5,   0,   0,   0,   NA,     0,  1)
+
+/* OMAP-1610 USB0 alternate configuration */
+MUX_CFG("W9_USB0_TXEN",		 B,   9,     5,	  2,  19,   0,	  2,	 0,  1)
+MUX_CFG("AA9_USB0_VP",		 B,   6,     5,	  2,  18,   0,	  2,	 0,  1)
+MUX_CFG("Y5_USB0_RCV",		 C,  21,     5,	  3,   1,   0,	  1,	 0,  1)
+MUX_CFG("R9_USB0_VM",		 C,  18,     5,	  3,   0,   0,	  3,	 0,  1)
+MUX_CFG("V6_USB0_TXD",		 C,  27,     5,	  3,   3,   0,	  3,	 0,  1)
+MUX_CFG("W5_USB0_SE0",		 C,  24,     5,	  3,   2,   0,	  3,	 0,  1)
+MUX_CFG("V9_USB0_SPEED",	 B,  12,     5,	  2,  20,   0,	  2,	 0,  1)
+MUX_CFG("Y10_USB0_SUSP",	 B,   3,     5,	  2,  17,   0,	  2,	 0,  1)
+
+/* USB2 interface */
+MUX_CFG("W9_USB2_TXEN",		 B,   9,     1,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("AA9_USB2_VP",		 B,   6,     1,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("Y5_USB2_RCV",		 C,  21,     1,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("R9_USB2_VM",		 C,  18,     1,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("V6_USB2_TXD",		 C,  27,     2,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("W5_USB2_SE0",		 C,  24,     2,	 NA,   0,   0,	 NA,	 0,  1)
+
+/* 16XX UART */
+MUX_CFG("R13_1610_UART1_TX",	 A,  12,     6,	  2,  10,   0,	  2,	10,  1)
+MUX_CFG("V14_16XX_UART1_RX",	 9,  18,     0,	  2,   2,   0,	  2,	 2,  1)
+MUX_CFG("R14_1610_UART1_CTS",	 9,  15,     0,	  2,   1,   0,	  2,	 1,  1)
+MUX_CFG("AA15_1610_UART1_RTS",	 9,  12,     1,	  2,   0,   0,	  2,	 0,  1)
+MUX_CFG("R9_16XX_UART2_RX",	 C,  18,     0,   3,   0,   0,    3,     0,  1)
+MUX_CFG("L14_16XX_UART3_RX",	 6,   3,     0,   0,  31,   0,    0,    31,  1)
+
+/* I2C interface */
+MUX_CFG("I2C_SCL",		 7,  24,     0,	 NA,   0,   0,	 NA,	 0,  0)
+MUX_CFG("I2C_SDA",		 7,  27,     0,	 NA,   0,   0,	 NA,	 0,  0)
+
+/* Keypad */
+MUX_CFG("F18_1610_KBC0",	 3,  15,     0,	  0,   5,   1,	  0,	 0,  0)
+MUX_CFG("D20_1610_KBC1",	 3,  12,     0,	  0,   4,   1,	  0,	 0,  0)
+MUX_CFG("D19_1610_KBC2",	 3,   9,     0,	  0,   3,   1,	  0,	 0,  0)
+MUX_CFG("E18_1610_KBC3",	 3,   6,     0,	  0,   2,   1,	  0,	 0,  0)
+MUX_CFG("C21_1610_KBC4",	 3,   3,     0,	  0,   1,   1,	  0,	 0,  0)
+MUX_CFG("G18_1610_KBR0",	 4,   0,     0,	  0,   10,  1,	  0,	 1,  0)
+MUX_CFG("F19_1610_KBR1",	 3,   27,    0,	  0,   9,   1,	  0,	 1,  0)
+MUX_CFG("H14_1610_KBR2",	 3,   24,    0,	  0,   8,   1,	  0,	 1,  0)
+MUX_CFG("E20_1610_KBR3",	 3,   21,    0,	  0,   7,   1,	  0,	 1,  0)
+MUX_CFG("E19_1610_KBR4",	 3,   18,    0,	  0,   6,   1,	  0,	 1,  0)
+MUX_CFG("N19_1610_KBR5",	 6,  12,     1,	  1,   2,   1,	  1,	 1,  0)
+
+/* Power management */
+MUX_CFG("T20_1610_LOW_PWR",	 7,   12,    1,	  NA,   0,   0,   NA,	 0,  0)
+
+/* MCLK Settings */
+MUX_CFG("V5_1710_MCLK_ON",	 B,   15,    0,	  NA,   0,   0,   NA,	 0,  0)
+MUX_CFG("V5_1710_MCLK_OFF",	 B,   15,    6,	  NA,   0,   0,   NA,	 0,  0)
+MUX_CFG("R10_1610_MCLK_ON",	 B,   18,    0,	  NA,  22,   0,	  NA,	 1,  0)
+MUX_CFG("R10_1610_MCLK_OFF",	 B,   18,    6,	  2,   22,   1,	  2,	 1,  1)
+
+/* CompactFlash controller, conflicts with MMC1 */
+MUX_CFG("P11_1610_CF_CD2",	 A,   27,    3,	  2,   15,   1,	  2,	 1,  1)
+MUX_CFG("R11_1610_CF_IOIS16",	 B,    0,    3,	  2,   16,   1,	  2,	 1,  1)
+MUX_CFG("V10_1610_CF_IREQ",	 A,   24,    3,	  2,   14,   0,	  2,	 0,  1)
+MUX_CFG("W10_1610_CF_RESET",	 A,   18,    3,	  2,   12,   1,	  2,	 1,  1)
+MUX_CFG("W11_1610_CF_CD1",	10,   15,    3,	  3,    8,   1,	  3,	 1,  1)
+};
+#endif	/* CONFIG_ARCH_OMAP15XX || CONFIG_ARCH_OMAP16XX */
+
+int __init omap1_mux_init(void)
+{
+
+#ifdef CONFIG_ARCH_OMAP730
+	omap_mux_register(omap730_pins, ARRAY_SIZE(omap730_pins));
+#endif
+
+#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
+	omap_mux_register(omap1xxx_pins, ARRAY_SIZE(omap1xxx_pins));
+#endif
+
+	return 0;
+}
+
+#endif
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 40c4f7c40e73..6810cfb84462 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -109,9 +109,10 @@ static struct platform_device serial_device = {
  * By default UART2 does not work on Innovator-1510 if you have
  * USB OHCI enabled. To use UART2, you must disable USB2 first.
  */
-void __init omap_serial_init(int ports[OMAP_MAX_NR_PORTS])
+void __init omap_serial_init(void)
 {
 	int i;
+	const struct omap_uart_config *info;
 
 	if (cpu_is_omap730()) {
 		serial_platform_data[0].regshift = 0;
@@ -126,10 +127,14 @@ void __init omap_serial_init(int ports[OMAP_MAX_NR_PORTS])
 		serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16;
 	}
 
+	info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
+	if (info == NULL)
+		return;
+
 	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
 		unsigned char reg;
 
-		if (ports[i] == 0) {
+		if (!((1 << i) & info->enabled_uarts)) {
 			serial_platform_data[i].membase = NULL;
 			serial_platform_data[i].mapbase = 0;
 			continue;
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 191a9b1ee9b7..cdbf4d7620c6 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -226,8 +226,8 @@ unsigned long long sched_clock(void)
 
 #ifdef CONFIG_OMAP_32K_TIMER
 
-#ifdef CONFIG_ARCH_OMAP1510
-#error OMAP 32KHz timer does not currently work on 1510!
+#ifdef CONFIG_ARCH_OMAP15XX
+#error OMAP 32KHz timer does not currently work on 15XX!
 #endif
 
 /*
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
new file mode 100644
index 000000000000..578880943cf2
--- /dev/null
+++ b/arch/arm/mach-omap2/Kconfig
@@ -0,0 +1,22 @@
+comment "OMAP Core Type"
+	depends on ARCH_OMAP2
+
+config ARCH_OMAP24XX
+	bool "OMAP24xx Based System"
+	depends on ARCH_OMAP2
+
+config ARCH_OMAP2420
+	bool "OMAP2420 support"
+	depends on ARCH_OMAP24XX
+
+comment "OMAP Board Type"
+	depends on ARCH_OMAP2
+
+config MACH_OMAP_GENERIC
+	bool "Generic OMAP board"
+	depends on ARCH_OMAP2 && ARCH_OMAP24XX
+
+config MACH_OMAP_H4
+	bool "OMAP 2420 H4 board"
+	depends on ARCH_OMAP2 && ARCH_OMAP24XX
+
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
new file mode 100644
index 000000000000..42041166435c
--- /dev/null
+++ b/arch/arm/mach-omap2/Makefile
@@ -0,0 +1,13 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Common support
+obj-y := irq.o id.o io.o sram-fn.o clock.o mux.o devices.o serial.o
+
+obj-$(CONFIG_OMAP_MPU_TIMER)		+= timer-gp.o
+
+# Specific board support
+obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
+obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o
+
diff --git a/arch/arm/mach-omap2/Makefile.boot b/arch/arm/mach-omap2/Makefile.boot
new file mode 100644
index 000000000000..565aff7f37a9
--- /dev/null
+++ b/arch/arm/mach-omap2/Makefile.boot
@@ -0,0 +1,3 @@
+  zreladdr-y		:= 0x80008000
+params_phys-y		:= 0x80000100
+initrd_phys-y		:= 0x80800000
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
new file mode 100644
index 000000000000..c602e7a3d93e
--- /dev/null
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -0,0 +1,80 @@
+/*
+ * linux/arch/arm/mach-omap/omap2/board-generic.c
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Paul Mundt <paul.mundt@nokia.com>
+ *
+ * Modified from mach-omap/omap1/board-generic.c
+ *
+ * Code for generic OMAP2 board. Should work on many OMAP2 systems where
+ * the bootloader passes the board-specific data to the kernel.
+ * Do not put any board specific code to this file; create a new machine
+ * type if you need custom low-level initializations.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/usb.h>
+#include <asm/arch/board.h>
+#include <asm/arch/common.h>
+
+static void __init omap_generic_init_irq(void)
+{
+	omap_init_irq();
+}
+
+static struct omap_uart_config generic_uart_config __initdata = {
+	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_mmc_config generic_mmc_config __initdata = {
+	.mmc [0] = {
+		.enabled 	= 0,
+		.wire4		= 0,
+		.wp_pin		= -1,
+		.power_pin	= -1,
+		.switch_pin	= -1,
+	},
+};
+
+static struct omap_board_config_kernel generic_config[] = {
+	{ OMAP_TAG_UART,	&generic_uart_config },
+	{ OMAP_TAG_MMC,		&generic_mmc_config },
+};
+
+static void __init omap_generic_init(void)
+{
+	omap_board_config = generic_config;
+	omap_board_config_size = ARRAY_SIZE(generic_config);
+	omap_serial_init();
+}
+
+static void __init omap_generic_map_io(void)
+{
+	omap_map_common_io();
+}
+
+MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
+	/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
+	.phys_ram	= 0x80000000,
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap_generic_map_io,
+	.init_irq	= omap_generic_init_irq,
+	.init_machine	= omap_generic_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
new file mode 100644
index 000000000000..f2554469a76a
--- /dev/null
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -0,0 +1,197 @@
+/*
+ * linux/arch/arm/mach-omap/omap2/board-h4.c
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Paul Mundt <paul.mundt@nokia.com>
+ *
+ * Modified from mach-omap/omap1/board-generic.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/delay.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/usb.h>
+#include <asm/arch/board.h>
+#include <asm/arch/common.h>
+#include <asm/arch/prcm.h>
+
+#include <asm/io.h>
+#include <asm/delay.h>
+
+static struct mtd_partition h4_partitions[] = {
+	/* bootloader (U-Boot, etc) in first sector */
+	{
+	      .name		= "bootloader",
+	      .offset		= 0,
+	      .size		= SZ_128K,
+	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
+	},
+	/* bootloader params in the next sector */
+	{
+	      .name		= "params",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= SZ_128K,
+	      .mask_flags	= 0,
+	},
+	/* kernel */
+	{
+	      .name		= "kernel",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= SZ_2M,
+	      .mask_flags	= 0
+	},
+	/* file system */
+	{
+	      .name		= "filesystem",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= MTDPART_SIZ_FULL,
+	      .mask_flags	= 0
+	}
+};
+
+static struct flash_platform_data h4_flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 2,
+	.parts		= h4_partitions,
+	.nr_parts	= ARRAY_SIZE(h4_partitions),
+};
+
+static struct resource h4_flash_resource = {
+	.start		= H4_CS0_BASE,
+	.end		= H4_CS0_BASE + SZ_64M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device h4_flash_device = {
+	.name		= "omapflash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &h4_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &h4_flash_resource,
+};
+
+static struct resource h4_smc91x_resources[] = {
+	[0] = {
+		.start  = OMAP24XX_ETHR_START,          /* Physical */
+		.end    = OMAP24XX_ETHR_START + 0xf,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
+		.end    = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device h4_smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(h4_smc91x_resources),
+	.resource	= h4_smc91x_resources,
+};
+
+static struct platform_device *h4_devices[] __initdata = {
+	&h4_smc91x_device,
+	&h4_flash_device,
+};
+
+static inline void __init h4_init_smc91x(void)
+{
+	/* Make sure CS1 timings are correct */
+	GPMC_CONFIG1_1 = 0x00011200;
+	GPMC_CONFIG2_1 = 0x001f1f01;
+	GPMC_CONFIG3_1 = 0x00080803;
+	GPMC_CONFIG4_1 = 0x1c091c09;
+	GPMC_CONFIG5_1 = 0x041f1f1f;
+	GPMC_CONFIG6_1 = 0x000004c4;
+	GPMC_CONFIG7_1 = 0x00000f40 | (0x08000000 >> 24);
+	udelay(100);
+
+	omap_cfg_reg(M15_24XX_GPIO92);
+	if (omap_request_gpio(OMAP24XX_ETHR_GPIO_IRQ) < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
+			OMAP24XX_ETHR_GPIO_IRQ);
+		return;
+	}
+	omap_set_gpio_direction(OMAP24XX_ETHR_GPIO_IRQ, 1);
+}
+
+static void __init omap_h4_init_irq(void)
+{
+	omap_init_irq();
+	omap_gpio_init();
+	h4_init_smc91x();
+}
+
+static struct omap_uart_config h4_uart_config __initdata = {
+	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_mmc_config h4_mmc_config __initdata = {
+	.mmc [0] = {
+		.enabled	= 1,
+		.wire4		= 1,
+		.wp_pin		= -1,
+		.power_pin	= -1,
+		.switch_pin	= -1,
+	},
+};
+
+static struct omap_lcd_config h4_lcd_config __initdata = {
+	.panel_name	= "h4",
+	.ctrl_name	= "internal",
+};
+
+static struct omap_board_config_kernel h4_config[] = {
+	{ OMAP_TAG_UART,	&h4_uart_config },
+	{ OMAP_TAG_MMC,		&h4_mmc_config },
+	{ OMAP_TAG_LCD,		&h4_lcd_config },
+};
+
+static void __init omap_h4_init(void)
+{
+	/*
+	 * Make sure the serial ports are muxed on at this point.
+	 * You have to mux them off in device drivers later on
+	 * if not needed.
+	 */
+	platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
+	omap_board_config = h4_config;
+	omap_board_config_size = ARRAY_SIZE(h4_config);
+	omap_serial_init();
+}
+
+static void __init omap_h4_map_io(void)
+{
+	omap_map_common_io();
+}
+
+MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
+	/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
+	.phys_ram	= 0x80000000,
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap_h4_map_io,
+	.init_irq	= omap_h4_init_irq,
+	.init_machine	= omap_h4_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
new file mode 100644
index 000000000000..85818d9f2635
--- /dev/null
+++ b/arch/arm/mach-omap2/clock.c
@@ -0,0 +1,1129 @@
+/*
+ *  linux/arch/arm/mach-omap2/clock.c
+ *
+ *  Copyright (C) 2005 Texas Instruments Inc.
+ *  Richard Woodruff <r-woodruff2@ti.com>
+ *  Created for OMAP2.
+ *
+ *  Cleaned up and modified to use omap shared clock framework by
+ *  Tony Lindgren <tony@atomide.com>
+ *
+ *  Based on omap1 clock.c, Copyright (C) 2004 - 2005 Nokia corporation
+ *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+
+#include <asm/hardware/clock.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sram.h>
+#include <asm/arch/prcm.h>
+
+#include "clock.h"
+
+//#define DOWN_VARIABLE_DPLL 1			/* Experimental */
+
+static struct prcm_config *curr_prcm_set;
+static struct memory_timings mem_timings;
+static u32 curr_perf_level = PRCM_FULL_SPEED;
+
+/*-------------------------------------------------------------------------
+ * Omap2 specific clock functions
+ *-------------------------------------------------------------------------*/
+
+/* Recalculate SYST_CLK */
+static void omap2_sys_clk_recalc(struct clk * clk)
+{
+	u32 div = PRCM_CLKSRC_CTRL;
+	div &= (1 << 7) | (1 << 6);	/* Test if ext clk divided by 1 or 2 */
+	div >>= clk->rate_offset;
+	clk->rate = (clk->parent->rate / div);
+	propagate_rate(clk);
+}
+
+static u32 omap2_get_dpll_rate(struct clk * tclk)
+{
+	int dpll_clk, dpll_mult, dpll_div, amult;
+
+	dpll_mult = (CM_CLKSEL1_PLL >> 12) & 0x03ff;	/* 10 bits */
+	dpll_div = (CM_CLKSEL1_PLL >> 8) & 0x0f;	/* 4 bits */
+	dpll_clk = (tclk->parent->rate * dpll_mult) / (dpll_div + 1);
+	amult = CM_CLKSEL2_PLL & 0x3;
+	dpll_clk *= amult;
+
+	return dpll_clk;
+}
+
+static void omap2_followparent_recalc(struct clk *clk)
+{
+	followparent_recalc(clk);
+}
+
+static void omap2_propagate_rate(struct clk * clk)
+{
+	if (!(clk->flags & RATE_FIXED))
+		clk->rate = clk->parent->rate;
+
+	propagate_rate(clk);
+}
+
+/* Enable an APLL if off */
+static void omap2_clk_fixed_enable(struct clk *clk)
+{
+	u32 cval, i=0;
+
+	if (clk->enable_bit == 0xff)			/* Parent will do it */
+		return;
+
+	cval = CM_CLKEN_PLL;
+
+	if ((cval & (0x3 << clk->enable_bit)) == (0x3 << clk->enable_bit))
+		return;
+
+	cval &= ~(0x3 << clk->enable_bit);
+	cval |= (0x3 << clk->enable_bit);
+	CM_CLKEN_PLL = cval;
+
+	if (clk == &apll96_ck)
+		cval = (1 << 8);
+	else if (clk == &apll54_ck)
+		cval = (1 << 6);
+
+	while (!CM_IDLEST_CKGEN & cval) {		/* Wait for lock */
+		++i;
+		udelay(1);
+		if (i == 100000)
+			break;
+	}
+}
+
+/* Enables clock without considering parent dependencies or use count
+ * REVISIT: Maybe change this to use clk->enable like on omap1?
+ */
+static int omap2_clk_enable(struct clk * clk)
+{
+	u32 regval32;
+
+	if (clk->flags & ALWAYS_ENABLED)
+		return 0;
+
+	if (unlikely(clk->enable_reg == 0)) {
+		printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
+		       clk->name);
+		return 0;
+	}
+
+	if (clk->enable_reg == (void __iomem *)&CM_CLKEN_PLL) {
+		omap2_clk_fixed_enable(clk);
+		return 0;
+	}
+
+	regval32 = __raw_readl(clk->enable_reg);
+	regval32 |= (1 << clk->enable_bit);
+	__raw_writel(regval32, clk->enable_reg);
+
+	return 0;
+}
+
+/* Stop APLL */
+static void omap2_clk_fixed_disable(struct clk *clk)
+{
+	u32 cval;
+
+	if(clk->enable_bit == 0xff)		/* let parent off do it */
+		return;
+
+	cval = CM_CLKEN_PLL;
+	cval &= ~(0x3 << clk->enable_bit);
+	CM_CLKEN_PLL = cval;
+}
+
+/* Disables clock without considering parent dependencies or use count */
+static void omap2_clk_disable(struct clk *clk)
+{
+	u32 regval32;
+
+	if (clk->enable_reg == 0)
+		return;
+
+	if (clk->enable_reg == (void __iomem *)&CM_CLKEN_PLL) {
+		omap2_clk_fixed_disable(clk);
+		return;
+	}
+
+	regval32 = __raw_readl(clk->enable_reg);
+	regval32 &= ~(1 << clk->enable_bit);
+	__raw_writel(regval32, clk->enable_reg);
+}
+
+static int omap2_clk_use(struct clk *clk)
+{
+	int ret = 0;
+
+	if (clk->usecount++ == 0) {
+		if (likely((u32)clk->parent))
+			ret = omap2_clk_use(clk->parent);
+
+		if (unlikely(ret != 0)) {
+			clk->usecount--;
+			return ret;
+		}
+
+		ret = omap2_clk_enable(clk);
+
+		if (unlikely(ret != 0) && clk->parent) {
+			omap2_clk_unuse(clk->parent);
+			clk->usecount--;
+		}
+	}
+
+	return ret;
+}
+
+static void omap2_clk_unuse(struct clk *clk)
+{
+	if (clk->usecount > 0 && !(--clk->usecount)) {
+		omap2_clk_disable(clk);
+		if (likely((u32)clk->parent))
+			omap2_clk_unuse(clk->parent);
+	}
+}
+
+/*
+ * Uses the current prcm set to tell if a rate is valid.
+ * You can go slower, but not faster within a given rate set.
+ */
+static u32 omap2_dpll_round_rate(unsigned long target_rate)
+{
+	u32 high, low;
+
+	if ((CM_CLKSEL2_PLL & 0x3) == 1) {	/* DPLL clockout */
+		high = curr_prcm_set->dpll_speed * 2;
+		low = curr_prcm_set->dpll_speed;
+	} else {				/* DPLL clockout x 2 */
+		high = curr_prcm_set->dpll_speed;
+		low = curr_prcm_set->dpll_speed / 2;
+	}
+
+#ifdef DOWN_VARIABLE_DPLL
+	if (target_rate > high)
+		return high;
+	else
+		return target_rate;
+#else
+	if (target_rate > low)
+		return high;
+	else
+		return low;
+#endif
+
+}
+
+/*
+ * Used for clocks that are part of CLKSEL_xyz governed clocks.
+ * REVISIT: Maybe change to use clk->enable() functions like on omap1?
+ */
+static void omap2_clksel_recalc(struct clk * clk)
+{
+	u32 fixed = 0, div = 0;
+
+	if (clk == &dpll_ck) {
+		clk->rate = omap2_get_dpll_rate(clk);
+		fixed = 1;
+		div = 0;
+	}
+
+	if (clk == &iva1_mpu_int_ifck) {
+		div = 2;
+		fixed = 1;
+	}
+
+	if ((clk == &dss1_fck) && ((CM_CLKSEL1_CORE & (0x1f << 8)) == 0)) {
+		clk->rate = sys_ck.rate;
+		return;
+	}
+
+	if (!fixed) {
+		div = omap2_clksel_get_divisor(clk);
+		if (div == 0)
+			return;
+	}
+
+	if (div != 0) {
+		if (unlikely(clk->rate == clk->parent->rate / div))
+			return;
+		clk->rate = clk->parent->rate / div;
+	}
+
+	if (unlikely(clk->flags & RATE_PROPAGATES))
+		propagate_rate(clk);
+}
+
+/*
+ * Finds best divider value in an array based on the source and target
+ * rates. The divider array must be sorted with smallest divider first.
+ */
+static inline u32 omap2_divider_from_table(u32 size, u32 *div_array,
+					   u32 src_rate, u32 tgt_rate)
+{
+	int i, test_rate;
+
+	if (div_array == NULL)
+		return ~1;
+
+	for (i=0; i < size; i++) {
+		test_rate = src_rate / *div_array;
+		if (test_rate <= tgt_rate)
+			return *div_array;
+		++div_array;
+	}
+
+	return ~0;	/* No acceptable divider */
+}
+
+/*
+ * Find divisor for the given clock and target rate.
+ *
+ * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT,
+ * they are only settable as part of virtual_prcm set.
+ */
+static u32 omap2_clksel_round_rate(struct clk *tclk, u32 target_rate,
+	u32 *new_div)
+{
+	u32 gfx_div[] = {2, 3, 4};
+	u32 sysclkout_div[] = {1, 2, 4, 8, 16};
+	u32 dss1_div[] = {1, 2, 3, 4, 5, 6, 8, 9, 12, 16};
+	u32 vylnq_div[] = {1, 2, 3, 4, 6, 8, 9, 12, 16, 18};
+	u32 best_div = ~0, asize = 0;
+	u32 *div_array = NULL;
+
+	switch (tclk->flags & SRC_RATE_SEL_MASK) {
+	case CM_GFX_SEL1:
+		asize = 3;
+		div_array = gfx_div;
+		break;
+	case CM_PLL_SEL1:
+		return omap2_dpll_round_rate(target_rate);
+	case CM_SYSCLKOUT_SEL1:
+		asize = 5;
+		div_array = sysclkout_div;
+		break;
+	case CM_CORE_SEL1:
+		if(tclk == &dss1_fck){
+			if(tclk->parent == &core_ck){
+				asize = 10;
+				div_array = dss1_div;
+			} else {
+				*new_div = 0; /* fixed clk */
+				return(tclk->parent->rate);
+			}
+		} else if((tclk == &vlynq_fck) && cpu_is_omap2420()){
+			if(tclk->parent == &core_ck){
+				asize = 10;
+				div_array = vylnq_div;
+			} else {
+				*new_div = 0; /* fixed clk */
+				return(tclk->parent->rate);
+			}
+		}
+		break;
+	}
+
+	best_div = omap2_divider_from_table(asize, div_array,
+	 tclk->parent->rate, target_rate);
+	if (best_div == ~0){
+		*new_div = 1;
+		return best_div; /* signal error */
+	}
+
+	*new_div = best_div;
+	return (tclk->parent->rate / best_div);
+}
+
+/* Given a clock and a rate apply a clock specific rounding function */
+static long omap2_clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	u32 new_div = 0;
+	int valid_rate;
+
+	if (clk->flags & RATE_FIXED)
+		return clk->rate;
+
+	if (clk->flags & RATE_CKCTL) {
+		valid_rate = omap2_clksel_round_rate(clk, rate, &new_div);
+		return valid_rate;
+	}
+
+	if (clk->round_rate != 0)
+		return clk->round_rate(clk, rate);
+
+	return clk->rate;
+}
+
+/*
+ * Check the DLL lock state, and return tue if running in unlock mode.
+ * This is needed to compenste for the shifted DLL value in unlock mode.
+ */
+static u32 omap2_dll_force_needed(void)
+{
+	u32 dll_state = SDRC_DLLA_CTRL;		/* dlla and dllb are a set */
+
+	if ((dll_state & (1 << 2)) == (1 << 2))
+		return 1;
+	else
+		return 0;
+}
+
+static void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
+{
+	unsigned long dll_cnt;
+	u32 fast_dll = 0;
+
+	mem_timings.m_type = !((SDRC_MR_0 & 0x3) == 0x1); /* DDR = 1, SDR = 0 */
+
+	/* 2422 es2.05 and beyond has a single SIP DDR instead of 2 like others.
+	 * In the case of 2422, its ok to use CS1 instead of CS0.
+	 */
+
+#if 0	/* FIXME: Enable after 24xx cpu detection works */
+	ctype = get_cpu_type();
+	if (cpu_is_omap2422())
+		mem_timings.base_cs = 1;
+	else
+#endif
+		mem_timings.base_cs = 0;
+
+	if (mem_timings.m_type != M_DDR)
+		return;
+
+	/* With DDR we need to determine the low frequency DLL value */
+	if (((mem_timings.fast_dll_ctrl & (1 << 2)) == M_LOCK_CTRL))
+		mem_timings.dll_mode = M_UNLOCK;
+	else
+		mem_timings.dll_mode = M_LOCK;
+
+	if (mem_timings.base_cs == 0) {
+		fast_dll = SDRC_DLLA_CTRL;
+		dll_cnt = SDRC_DLLA_STATUS & 0xff00;
+	} else {
+		fast_dll = SDRC_DLLB_CTRL;
+		dll_cnt = SDRC_DLLB_STATUS & 0xff00;
+	}
+	if (force_lock_to_unlock_mode) {
+		fast_dll &= ~0xff00;
+		fast_dll |= dll_cnt;		/* Current lock mode */
+	}
+	mem_timings.fast_dll_ctrl = fast_dll;
+
+	/* No disruptions, DDR will be offline & C-ABI not followed */
+	omap2_sram_ddr_init(&mem_timings.slow_dll_ctrl,
+			    mem_timings.fast_dll_ctrl,
+			    mem_timings.base_cs,
+			    force_lock_to_unlock_mode);
+	mem_timings.slow_dll_ctrl &= 0xff00;	/* Keep lock value */
+
+	/* Turn status into unlock ctrl */
+	mem_timings.slow_dll_ctrl |=
+		((mem_timings.fast_dll_ctrl & 0xF) | (1 << 2));
+
+	/* 90 degree phase for anything below 133Mhz */
+	mem_timings.slow_dll_ctrl |= (1 << 1);
+}
+
+static u32 omap2_reprogram_sdrc(u32 level, u32 force)
+{
+	u32 prev = curr_perf_level, flags;
+
+	if ((curr_perf_level == level) && !force)
+		return prev;
+
+	if (level == PRCM_HALF_SPEED) {
+		local_irq_save(flags);
+		PRCM_VOLTSETUP = 0xffff;
+		omap2_sram_reprogram_sdrc(PRCM_HALF_SPEED,
+					  mem_timings.slow_dll_ctrl,
+					  mem_timings.m_type);
+		curr_perf_level = PRCM_HALF_SPEED;
+		local_irq_restore(flags);
+	}
+	if (level == PRCM_FULL_SPEED) {
+		local_irq_save(flags);
+		PRCM_VOLTSETUP = 0xffff;
+		omap2_sram_reprogram_sdrc(PRCM_FULL_SPEED,
+					  mem_timings.fast_dll_ctrl,
+					  mem_timings.m_type);
+		curr_perf_level = PRCM_FULL_SPEED;
+		local_irq_restore(flags);
+	}
+
+	return prev;
+}
+
+static int omap2_reprogram_dpll(struct clk * clk, unsigned long rate)
+{
+	u32 flags, cur_rate, low, mult, div, valid_rate, done_rate;
+	u32 bypass = 0;
+	struct prcm_config tmpset;
+	int ret = -EINVAL;
+
+	local_irq_save(flags);
+	cur_rate = omap2_get_dpll_rate(&dpll_ck);
+	mult = CM_CLKSEL2_PLL & 0x3;
+
+	if ((rate == (cur_rate / 2)) && (mult == 2)) {
+		omap2_reprogram_sdrc(PRCM_HALF_SPEED, 1);
+	} else if ((rate == (cur_rate * 2)) && (mult == 1)) {
+		omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1);
+	} else if (rate != cur_rate) {
+		valid_rate = omap2_dpll_round_rate(rate);
+		if (valid_rate != rate)
+			goto dpll_exit;
+
+		if ((CM_CLKSEL2_PLL & 0x3) == 1)
+			low = curr_prcm_set->dpll_speed;
+		else
+			low = curr_prcm_set->dpll_speed / 2;
+
+		tmpset.cm_clksel1_pll = CM_CLKSEL1_PLL;
+		tmpset.cm_clksel1_pll &= ~(0x3FFF << 8);
+		div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
+		tmpset.cm_clksel2_pll = CM_CLKSEL2_PLL;
+		tmpset.cm_clksel2_pll &= ~0x3;
+		if (rate > low) {
+			tmpset.cm_clksel2_pll |= 0x2;
+			mult = ((rate / 2) / 1000000);
+			done_rate = PRCM_FULL_SPEED;
+		} else {
+			tmpset.cm_clksel2_pll |= 0x1;
+			mult = (rate / 1000000);
+			done_rate = PRCM_HALF_SPEED;
+		}
+		tmpset.cm_clksel1_pll |= ((div << 8) | (mult << 12));
+
+		/* Worst case */
+		tmpset.base_sdrc_rfr = V24XX_SDRC_RFR_CTRL_BYPASS;
+
+		if (rate == curr_prcm_set->xtal_speed)	/* If asking for 1-1 */
+			bypass = 1;
+
+		omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1); /* For init_mem */
+
+		/* Force dll lock mode */
+		omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
+			       bypass);
+
+		/* Errata: ret dll entry state */
+		omap2_init_memory_params(omap2_dll_force_needed());
+		omap2_reprogram_sdrc(done_rate, 0);
+	}
+	omap2_clksel_recalc(&dpll_ck);
+	ret = 0;
+
+dpll_exit:
+	local_irq_restore(flags);
+	return(ret);
+}
+
+/* Just return the MPU speed */
+static void omap2_mpu_recalc(struct clk * clk)
+{
+	clk->rate = curr_prcm_set->mpu_speed;
+}
+
+/*
+ * Look for a rate equal or less than the target rate given a configuration set.
+ *
+ * What's not entirely clear is "which" field represents the key field.
+ * Some might argue L3-DDR, others ARM, others IVA. This code is simple and
+ * just uses the ARM rates.
+ */
+static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate)
+{
+	struct prcm_config * ptr;
+	long highest_rate;
+
+	if (clk != &virt_prcm_set)
+		return -EINVAL;
+
+	highest_rate = -EINVAL;
+
+	for (ptr = rate_table; ptr->mpu_speed; ptr++) {
+		if (ptr->xtal_speed != sys_ck.rate)
+			continue;
+
+		highest_rate = ptr->mpu_speed;
+
+		/* Can check only after xtal frequency check */
+		if (ptr->mpu_speed <= rate)
+			break;
+	}
+	return highest_rate;
+}
+
+/*
+ * omap2_convert_field_to_div() - turn field value into integer divider
+ */
+static u32 omap2_clksel_to_divisor(u32 div_sel, u32 field_val)
+{
+	u32 i;
+	u32 clkout_array[] = {1, 2, 4, 8, 16};
+
+	if ((div_sel & SRC_RATE_SEL_MASK) == CM_SYSCLKOUT_SEL1) {
+		for (i = 0; i < 5; i++) {
+			if (field_val == i)
+				return clkout_array[i];
+		}
+		return ~0;
+	} else
+		return field_val;
+}
+
+/*
+ * Returns the CLKSEL divider register value
+ * REVISIT: This should be cleaned up to work nicely with void __iomem *
+ */
+static u32 omap2_get_clksel(u32 *div_sel, u32 *field_mask,
+			    struct clk *clk)
+{
+	int ret = ~0;
+	u32 reg_val, div_off;
+	u32 div_addr = 0;
+	u32 mask = ~0;
+
+	div_off = clk->rate_offset;
+
+	switch ((*div_sel & SRC_RATE_SEL_MASK)) {
+	case CM_MPU_SEL1:
+		div_addr = (u32)&CM_CLKSEL_MPU;
+		mask = 0x1f;
+		break;
+	case CM_DSP_SEL1:
+		div_addr = (u32)&CM_CLKSEL_DSP;
+		if (cpu_is_omap2420()) {
+			if ((div_off == 0) || (div_off == 8))
+				mask = 0x1f;
+			else if (div_off == 5)
+				mask = 0x3;
+		} else if (cpu_is_omap2430()) {
+			if (div_off == 0)
+				mask = 0x1f;
+			else if (div_off == 5)
+				mask = 0x3;
+		}
+		break;
+	case CM_GFX_SEL1:
+		div_addr = (u32)&CM_CLKSEL_GFX;
+		if (div_off == 0)
+			mask = 0x7;
+		break;
+	case CM_MODEM_SEL1:
+		div_addr = (u32)&CM_CLKSEL_MDM;
+		if (div_off == 0)
+			mask = 0xf;
+		break;
+	case CM_SYSCLKOUT_SEL1:
+		div_addr = (u32)&PRCM_CLKOUT_CTRL;
+		if ((div_off == 3) || (div_off = 11))
+			mask= 0x3;
+		break;
+	case CM_CORE_SEL1:
+		div_addr = (u32)&CM_CLKSEL1_CORE;
+		switch (div_off) {
+		case 0:					/* l3 */
+		case 8:					/* dss1 */
+		case 15:				/* vylnc-2420 */
+		case 20:				/* ssi */
+			mask = 0x1f; break;
+		case 5:					/* l4 */
+			mask = 0x3; break;
+		case 13:				/* dss2 */
+			mask = 0x1; break;
+		case 25:				/* usb */
+			mask = 0xf; break;
+		}
+	}
+
+	*field_mask = mask;
+
+	if (unlikely(mask == ~0))
+		div_addr = 0;
+
+	*div_sel = div_addr;
+
+	if (unlikely(div_addr == 0))
+		return ret;
+
+	/* Isolate field */
+	reg_val = __raw_readl((void __iomem *)div_addr) & (mask << div_off);
+
+	/* Normalize back to divider value */
+	reg_val >>= div_off;
+
+	return reg_val;
+}
+
+/*
+ * Return divider to be applied to parent clock.
+ * Return 0 on error.
+ */
+static u32 omap2_clksel_get_divisor(struct clk *clk)
+{
+	int ret = 0;
+	u32 div, div_sel, div_off, field_mask, field_val;
+
+	/* isolate control register */
+	div_sel = (SRC_RATE_SEL_MASK & clk->flags);
+
+	div_off = clk->rate_offset;
+	field_val = omap2_get_clksel(&div_sel, &field_mask, clk);
+	if (div_sel == 0)
+		return ret;
+
+	div_sel = (SRC_RATE_SEL_MASK & clk->flags);
+	div = omap2_clksel_to_divisor(div_sel, field_val);
+
+	return div;
+}
+
+/* Set the clock rate for a clock source */
+static int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
+
+{
+	int ret = -EINVAL;
+	void __iomem * reg;
+	u32 div_sel, div_off, field_mask, field_val, reg_val, validrate;
+	u32 new_div = 0;
+
+	if (!(clk->flags & CONFIG_PARTICIPANT) && (clk->flags & RATE_CKCTL)) {
+		if (clk == &dpll_ck)
+			return omap2_reprogram_dpll(clk, rate);
+
+		/* Isolate control register */
+		div_sel = (SRC_RATE_SEL_MASK & clk->flags);
+		div_off = clk->src_offset;
+
+		validrate = omap2_clksel_round_rate(clk, rate, &new_div);
+		if(validrate != rate)
+			return(ret);
+
+		field_val = omap2_get_clksel(&div_sel, &field_mask, clk);
+		if (div_sel == 0)
+			return ret;
+
+		if(clk->flags & CM_SYSCLKOUT_SEL1){
+			switch(new_div){
+			case 16: field_val = 4; break;
+			case 8:  field_val = 3; break;
+			case 4:  field_val = 2; break;
+			case 2:  field_val = 1; break;
+			case 1:  field_val = 0; break;
+			}
+		}
+		else
+			field_val = new_div;
+
+		reg = (void __iomem *)div_sel;
+
+		reg_val = __raw_readl(reg);
+		reg_val &= ~(field_mask << div_off);
+		reg_val |= (field_val << div_off);
+
+		__raw_writel(reg_val, reg);
+		clk->rate = clk->parent->rate / field_val;
+
+		if (clk->flags & DELAYED_APP)
+			__raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL);
+		ret = 0;
+	} else if (clk->set_rate != 0)
+		ret = clk->set_rate(clk, rate);
+
+	if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES)))
+		propagate_rate(clk);
+
+	return ret;
+}
+
+/* Converts encoded control register address into a full address */
+static u32 omap2_get_src_field(u32 *type_to_addr, u32 reg_offset,
+			       struct clk *src_clk, u32 *field_mask)
+{
+	u32 val = ~0, src_reg_addr = 0, mask = 0;
+
+	/* Find target control register.*/
+	switch ((*type_to_addr & SRC_RATE_SEL_MASK)) {
+	case CM_CORE_SEL1:
+		src_reg_addr = (u32)&CM_CLKSEL1_CORE;
+		if (reg_offset == 13) {			/* DSS2_fclk */
+			mask = 0x1;
+			if (src_clk == &sys_ck)
+				val = 0;
+			if (src_clk == &func_48m_ck)
+				val = 1;
+		} else if (reg_offset == 8) {		/* DSS1_fclk */
+			mask = 0x1f;
+			if (src_clk == &sys_ck)
+				val = 0;
+			else if (src_clk == &core_ck)	/* divided clock */
+				val = 0x10;		/* rate needs fixing */
+		} else if ((reg_offset == 15) && cpu_is_omap2420()){ /*vlnyq*/
+			mask = 0x1F;
+			if(src_clk == &func_96m_ck)
+				val = 0;
+			else if (src_clk == &core_ck)
+				val = 0x10;
+		}
+		break;
+	case CM_CORE_SEL2:
+		src_reg_addr = (u32)&CM_CLKSEL2_CORE;
+		mask = 0x3;
+		if (src_clk == &func_32k_ck)
+			val = 0x0;
+		if (src_clk == &sys_ck)
+			val = 0x1;
+		if (src_clk == &alt_ck)
+			val = 0x2;
+		break;
+	case CM_WKUP_SEL1:
+		src_reg_addr = (u32)&CM_CLKSEL2_CORE;
+		mask = 0x3;
+		if (src_clk == &func_32k_ck)
+			val = 0x0;
+		if (src_clk == &sys_ck)
+			val = 0x1;
+		if (src_clk == &alt_ck)
+			val = 0x2;
+		break;
+	case CM_PLL_SEL1:
+		src_reg_addr = (u32)&CM_CLKSEL1_PLL;
+		mask = 0x1;
+		if (reg_offset == 0x3) {
+			if (src_clk == &apll96_ck)
+				val = 0;
+			if (src_clk == &alt_ck)
+				val = 1;
+		}
+		else if (reg_offset == 0x5) {
+			if (src_clk == &apll54_ck)
+				val = 0;
+			if (src_clk == &alt_ck)
+				val = 1;
+		}
+		break;
+	case CM_PLL_SEL2:
+		src_reg_addr = (u32)&CM_CLKSEL2_PLL;
+		mask = 0x3;
+		if (src_clk == &func_32k_ck)
+			val = 0x0;
+		if (src_clk == &dpll_ck)
+			val = 0x2;
+		break;
+	case CM_SYSCLKOUT_SEL1:
+		src_reg_addr = (u32)&PRCM_CLKOUT_CTRL;
+		mask = 0x3;
+		if (src_clk == &dpll_ck)
+			val = 0;
+		if (src_clk == &sys_ck)
+			val = 1;
+		if (src_clk == &func_54m_ck)
+			val = 2;
+		if (src_clk == &func_96m_ck)
+			val = 3;
+		break;
+	}
+
+	if (val == ~0)			/* Catch errors in offset */
+		*type_to_addr = 0;
+	else
+		*type_to_addr = src_reg_addr;
+	*field_mask = mask;
+
+	return val;
+}
+
+static int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
+{
+	void __iomem * reg;
+	u32 src_sel, src_off, field_val, field_mask, reg_val, rate;
+	int ret = -EINVAL;
+
+	if (unlikely(clk->flags & CONFIG_PARTICIPANT))
+		return ret;
+
+	if (clk->flags & SRC_SEL_MASK) {	/* On-chip SEL collection */
+		src_sel = (SRC_RATE_SEL_MASK & clk->flags);
+		src_off = clk->src_offset;
+
+		if (src_sel == 0)
+			goto set_parent_error;
+
+		field_val = omap2_get_src_field(&src_sel, src_off, new_parent,
+						&field_mask);
+
+		reg = (void __iomem *)src_sel;
+
+		if (clk->usecount > 0)
+			omap2_clk_disable(clk);
+
+		/* Set new source value (previous dividers if any in effect) */
+		reg_val = __raw_readl(reg) & ~(field_mask << src_off);
+		reg_val |= (field_val << src_off);
+		__raw_writel(reg_val, reg);
+
+		if (clk->flags & DELAYED_APP)
+			__raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL);
+
+		if (clk->usecount > 0)
+			omap2_clk_enable(clk);
+
+		clk->parent = new_parent;
+
+		/* SRC_RATE_SEL_MASK clocks follow their parents rates.*/
+		if ((new_parent == &core_ck) && (clk == &dss1_fck))
+			clk->rate = new_parent->rate / 0x10;
+		else
+			clk->rate = new_parent->rate;
+
+		if (unlikely(clk->flags & RATE_PROPAGATES))
+			propagate_rate(clk);
+
+		return 0;
+	} else {
+		clk->parent = new_parent;
+		rate = new_parent->rate;
+		omap2_clk_set_rate(clk, rate);
+		ret = 0;
+	}
+
+ set_parent_error:
+	return ret;
+}
+
+/* Sets basic clocks based on the specified rate */
+static int omap2_select_table_rate(struct clk * clk, unsigned long rate)
+{
+	u32 flags, cur_rate, done_rate, bypass = 0;
+	u8 cpu_mask = 0;
+	struct prcm_config *prcm;
+	unsigned long found_speed = 0;
+
+	if (clk != &virt_prcm_set)
+		return -EINVAL;
+
+	/* FIXME: Change cpu_is_omap2420() to cpu_is_omap242x() */
+	if (cpu_is_omap2420())
+		cpu_mask = RATE_IN_242X;
+	else if (cpu_is_omap2430())
+		cpu_mask = RATE_IN_243X;
+
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+
+		if (prcm->xtal_speed != sys_ck.rate)
+			continue;
+
+		if (prcm->mpu_speed <= rate) {
+			found_speed = prcm->mpu_speed;
+			break;
+		}
+	}
+
+	if (!found_speed) {
+		printk(KERN_INFO "Could not set MPU rate to %luMHz\n",
+	 rate / 1000000);
+		return -EINVAL;
+	}
+
+	curr_prcm_set = prcm;
+	cur_rate = omap2_get_dpll_rate(&dpll_ck);
+
+	if (prcm->dpll_speed == cur_rate / 2) {
+		omap2_reprogram_sdrc(PRCM_HALF_SPEED, 1);
+	} else if (prcm->dpll_speed == cur_rate * 2) {
+		omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1);
+	} else if (prcm->dpll_speed != cur_rate) {
+		local_irq_save(flags);
+
+		if (prcm->dpll_speed == prcm->xtal_speed)
+			bypass = 1;
+
+		if ((prcm->cm_clksel2_pll & 0x3) == 2)
+			done_rate = PRCM_FULL_SPEED;
+		else
+			done_rate = PRCM_HALF_SPEED;
+
+		/* MPU divider */
+		CM_CLKSEL_MPU = prcm->cm_clksel_mpu;
+
+		/* dsp + iva1 div(2420), iva2.1(2430) */
+		CM_CLKSEL_DSP = prcm->cm_clksel_dsp;
+
+		CM_CLKSEL_GFX = prcm->cm_clksel_gfx;
+
+		/* Major subsystem dividers */
+		CM_CLKSEL1_CORE = prcm->cm_clksel1_core;
+		if (cpu_is_omap2430())
+			CM_CLKSEL_MDM = prcm->cm_clksel_mdm;
+
+		/* x2 to enter init_mem */
+		omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1);
+
+		omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
+			       bypass);
+
+		omap2_init_memory_params(omap2_dll_force_needed());
+		omap2_reprogram_sdrc(done_rate, 0);
+
+		local_irq_restore(flags);
+	}
+	omap2_clksel_recalc(&dpll_ck);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------
+ * Omap2 clock reset and init functions
+ *-------------------------------------------------------------------------*/
+
+static struct clk_functions omap2_clk_functions = {
+	.clk_enable		= omap2_clk_enable,
+	.clk_disable		= omap2_clk_disable,
+	.clk_use		= omap2_clk_use,
+	.clk_unuse		= omap2_clk_unuse,
+	.clk_round_rate		= omap2_clk_round_rate,
+	.clk_set_rate		= omap2_clk_set_rate,
+	.clk_set_parent		= omap2_clk_set_parent,
+};
+
+static void __init omap2_get_crystal_rate(struct clk *osc, struct clk *sys)
+{
+	u32 div, aplls, sclk = 13000000;
+
+	aplls = CM_CLKSEL1_PLL;
+	aplls &= ((1 << 23) | (1 << 24) | (1 << 25));
+	aplls >>= 23;			/* Isolate field, 0,2,3 */
+
+	if (aplls == 0)
+		sclk = 19200000;
+	else if (aplls == 2)
+		sclk = 13000000;
+	else if (aplls == 3)
+		sclk = 12000000;
+
+	div = PRCM_CLKSRC_CTRL;
+	div &= ((1 << 7) | (1 << 6));
+	div >>= sys->rate_offset;
+
+	osc->rate = sclk * div;
+	sys->rate = sclk;
+}
+
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+static void __init omap2_disable_unused_clocks(void)
+{
+	struct clk *ck;
+	u32 regval32;
+
+	list_for_each_entry(ck, &clocks, node) {
+		if (ck->usecount > 0 || (ck->flags & ALWAYS_ENABLED) ||
+			ck->enable_reg == 0)
+			continue;
+
+		regval32 = __raw_readl(ck->enable_reg);
+		if ((regval32 & (1 << ck->enable_bit)) == 0)
+			continue;
+
+		printk(KERN_INFO "Disabling unused clock \"%s\"\n", ck->name);
+		omap2_clk_disable(ck);
+	}
+}
+late_initcall(omap2_disable_unused_clocks);
+#endif
+
+/*
+ * Switch the MPU rate if specified on cmdline.
+ * We cannot do this early until cmdline is parsed.
+ */
+static int __init omap2_clk_arch_init(void)
+{
+	if (!mpurate)
+		return -EINVAL;
+
+	if (omap2_select_table_rate(&virt_prcm_set, mpurate))
+		printk(KERN_ERR "Could not find matching MPU rate\n");
+
+	propagate_rate(&osc_ck);		/* update main root fast */
+	propagate_rate(&func_32k_ck);		/* update main root slow */
+
+	printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL/MPU): "
+	       "%ld.%01ld/%ld/%ld MHz\n",
+	       (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
+	       (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
+
+	return 0;
+}
+arch_initcall(omap2_clk_arch_init);
+
+int __init omap2_clk_init(void)
+{
+	struct prcm_config *prcm;
+	struct clk ** clkp;
+	u32 clkrate;
+
+	clk_init(&omap2_clk_functions);
+	omap2_get_crystal_rate(&osc_ck, &sys_ck);
+
+	for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks);
+	     clkp++) {
+
+		if ((*clkp)->flags & CLOCK_IN_OMAP242X && cpu_is_omap2420()) {
+			clk_register(*clkp);
+			continue;
+		}
+
+		if ((*clkp)->flags & CLOCK_IN_OMAP243X && cpu_is_omap2430()) {
+			clk_register(*clkp);
+			continue;
+		}
+	}
+
+	/* Check the MPU rate set by bootloader */
+	clkrate = omap2_get_dpll_rate(&dpll_ck);
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (prcm->xtal_speed != sys_ck.rate)
+			continue;
+		if (prcm->dpll_speed <= clkrate)
+			 break;
+	}
+	curr_prcm_set = prcm;
+
+	propagate_rate(&osc_ck);		/* update main root fast */
+	propagate_rate(&func_32k_ck);		/* update main root slow */
+
+	printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): "
+	       "%ld.%01ld/%ld/%ld MHz\n",
+	       (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
+	       (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
+
+	/*
+	 * Only enable those clocks we will need, let the drivers
+	 * enable other clocks as necessary
+	 */
+	clk_use(&sync_32k_ick);
+	clk_use(&omapctrl_ick);
+	if (cpu_is_omap2430())
+		clk_use(&sdrc_ick);
+
+	return 0;
+}
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
new file mode 100644
index 000000000000..4aeab5591bd3
--- /dev/null
+++ b/arch/arm/mach-omap2/clock.h
@@ -0,0 +1,2103 @@
+/*
+ *  linux/arch/arm/mach-omap24xx/clock.h
+ *
+ *  Copyright (C) 2005 Texas Instruments Inc.
+ *  Richard Woodruff <r-woodruff2@ti.com>
+ *  Created for OMAP2.
+ *
+ *  Copyright (C) 2004 Nokia corporation
+ *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK_H
+
+static void omap2_sys_clk_recalc(struct clk * clk);
+static void omap2_clksel_recalc(struct clk * clk);
+static void omap2_followparent_recalc(struct clk * clk);
+static void omap2_propagate_rate(struct clk * clk);
+static void omap2_mpu_recalc(struct clk * clk);
+static int omap2_select_table_rate(struct clk * clk, unsigned long rate);
+static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate);
+static void omap2_clk_unuse(struct clk *clk);
+static void omap2_sys_clk_recalc(struct clk * clk);
+static u32 omap2_clksel_to_divisor(u32 div_sel, u32 field_val);
+static u32 omap2_clksel_get_divisor(struct clk *clk);
+
+
+#define RATE_IN_242X	(1 << 0)
+#define RATE_IN_243X	(1 << 1)
+
+/* Memory timings */
+#define M_DDR		1
+#define M_LOCK_CTRL	(1 << 2)
+#define M_UNLOCK	0
+#define M_LOCK		1
+
+struct memory_timings {
+	u32 m_type;		/* ddr = 1, sdr = 0 */
+	u32 dll_mode;		/* use lock mode = 1, unlock mode = 0 */
+	u32 slow_dll_ctrl;	/* unlock mode, dll value for slow speed */
+	u32 fast_dll_ctrl;	/* unlock mode, dll value for fast speed */
+	u32 base_cs;		/* base chip select to use for calculations */
+};
+
+/* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
+ * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP
+ * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM
+ */
+struct prcm_config {
+	unsigned long xtal_speed;	/* crystal rate */
+	unsigned long dpll_speed;	/* dpll: out*xtal*M/(N-1)table_recalc */
+	unsigned long mpu_speed;	/* speed of MPU */
+	unsigned long cm_clksel_mpu;	/* mpu divider */
+	unsigned long cm_clksel_dsp;	/* dsp+iva1 div(2420), iva2.1(2430) */
+	unsigned long cm_clksel_gfx;	/* gfx dividers */
+	unsigned long cm_clksel1_core;	/* major subsystem dividers */
+	unsigned long cm_clksel1_pll;	/* m,n */
+	unsigned long cm_clksel2_pll;	/* dpllx1 or x2 out */
+	unsigned long cm_clksel_mdm;	/* modem dividers 2430 only */
+	unsigned long base_sdrc_rfr;	/* base refresh timing for a set */
+	unsigned char flags;
+};
+
+/* Mask for clksel which support parent settign in set_rate */
+#define SRC_SEL_MASK (CM_CORE_SEL1 | CM_CORE_SEL2 | CM_WKUP_SEL1 | \
+			CM_PLL_SEL1 | CM_PLL_SEL2 | CM_SYSCLKOUT_SEL1)
+
+/* Mask for clksel regs which support rate operations */
+#define SRC_RATE_SEL_MASK (CM_MPU_SEL1 | CM_DSP_SEL1 | CM_GFX_SEL1 | \
+			CM_MODEM_SEL1 | CM_CORE_SEL1 | CM_CORE_SEL2 | \
+			CM_WKUP_SEL1 | CM_PLL_SEL1 | CM_PLL_SEL2 | \
+			CM_SYSCLKOUT_SEL1)
+
+/*
+ * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
+ * These configurations are characterized by voltage and speed for clocks.
+ * The device is only validated for certain combinations. One way to express
+ * these combinations is via the 'ratio's' which the clocks operate with
+ * respect to each other. These ratio sets are for a given voltage/DPLL
+ * setting. All configurations can be described by a DPLL setting and a ratio
+ * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
+ *
+ * 2430 differs from 2420 in that there are no more phase synchronizers used.
+ * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
+ * 2430 (iva2.1, NOdsp, mdm)
+ */
+
+/* Core fields for cm_clksel, not ratio governed */
+#define RX_CLKSEL_DSS1			(0x10 << 8)
+#define RX_CLKSEL_DSS2			(0x0 << 13)
+#define RX_CLKSEL_SSI			(0x5 << 20)
+
+/*-------------------------------------------------------------------------
+ * Voltage/DPLL ratios
+ *-------------------------------------------------------------------------*/
+
+/* 2430 Ratio's, 2430-Ratio Config 1 */
+#define R1_CLKSEL_L3			(4 << 0)
+#define R1_CLKSEL_L4			(2 << 5)
+#define R1_CLKSEL_USB			(4 << 25)
+#define R1_CM_CLKSEL1_CORE_VAL		R1_CLKSEL_USB | RX_CLKSEL_SSI | \
+					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+					R1_CLKSEL_L4 | R1_CLKSEL_L3
+#define R1_CLKSEL_MPU			(2 << 0)
+#define R1_CM_CLKSEL_MPU_VAL		R1_CLKSEL_MPU
+#define R1_CLKSEL_DSP			(2 << 0)
+#define R1_CLKSEL_DSP_IF		(2 << 5)
+#define R1_CM_CLKSEL_DSP_VAL		R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF
+#define R1_CLKSEL_GFX			(2 << 0)
+#define R1_CM_CLKSEL_GFX_VAL		R1_CLKSEL_GFX
+#define R1_CLKSEL_MDM			(4 << 0)
+#define R1_CM_CLKSEL_MDM_VAL		R1_CLKSEL_MDM
+
+/* 2430-Ratio Config 2 */
+#define R2_CLKSEL_L3			(6 << 0)
+#define R2_CLKSEL_L4			(2 << 5)
+#define R2_CLKSEL_USB			(2 << 25)
+#define R2_CM_CLKSEL1_CORE_VAL		R2_CLKSEL_USB | RX_CLKSEL_SSI | \
+					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+					R2_CLKSEL_L4 | R2_CLKSEL_L3
+#define R2_CLKSEL_MPU			(2 << 0)
+#define R2_CM_CLKSEL_MPU_VAL		R2_CLKSEL_MPU
+#define R2_CLKSEL_DSP			(2 << 0)
+#define R2_CLKSEL_DSP_IF		(3 << 5)
+#define R2_CM_CLKSEL_DSP_VAL		R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF
+#define R2_CLKSEL_GFX			(2 << 0)
+#define R2_CM_CLKSEL_GFX_VAL		R2_CLKSEL_GFX
+#define R2_CLKSEL_MDM			(6 << 0)
+#define R2_CM_CLKSEL_MDM_VAL		R2_CLKSEL_MDM
+
+/* 2430-Ratio Bootm (BYPASS) */
+#define RB_CLKSEL_L3			(1 << 0)
+#define RB_CLKSEL_L4			(1 << 5)
+#define RB_CLKSEL_USB			(1 << 25)
+#define RB_CM_CLKSEL1_CORE_VAL		RB_CLKSEL_USB | RX_CLKSEL_SSI | \
+					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+					RB_CLKSEL_L4 | RB_CLKSEL_L3
+#define RB_CLKSEL_MPU			(1 << 0)
+#define RB_CM_CLKSEL_MPU_VAL		RB_CLKSEL_MPU
+#define RB_CLKSEL_DSP			(1 << 0)
+#define RB_CLKSEL_DSP_IF		(1 << 5)
+#define RB_CM_CLKSEL_DSP_VAL		RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF
+#define RB_CLKSEL_GFX			(1 << 0)
+#define RB_CM_CLKSEL_GFX_VAL		RB_CLKSEL_GFX
+#define RB_CLKSEL_MDM			(1 << 0)
+#define RB_CM_CLKSEL_MDM_VAL		RB_CLKSEL_MDM
+
+/* 2420 Ratio Equivalents */
+#define RXX_CLKSEL_VLYNQ		(0x12 << 15)
+#define RXX_CLKSEL_SSI			(0x8 << 20)
+
+/* 2420-PRCM III 532MHz core */
+#define RIII_CLKSEL_L3			(4 << 0)	/* 133MHz */
+#define RIII_CLKSEL_L4			(2 << 5)	/* 66.5MHz */
+#define RIII_CLKSEL_USB			(4 << 25)	/* 33.25MHz */
+#define RIII_CM_CLKSEL1_CORE_VAL	RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \
+					RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \
+					RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \
+					RIII_CLKSEL_L3
+#define RIII_CLKSEL_MPU			(2 << 0)	/* 266MHz */
+#define RIII_CM_CLKSEL_MPU_VAL		RIII_CLKSEL_MPU
+#define RIII_CLKSEL_DSP			(3 << 0)	/* c5x - 177.3MHz */
+#define RIII_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 88.67MHz */
+#define RIII_SYNC_DSP			(1 << 7)	/* Enable sync */
+#define RIII_CLKSEL_IVA			(6 << 8)	/* iva1 - 88.67MHz */
+#define RIII_SYNC_IVA			(1 << 13)	/* Enable sync */
+#define RIII_CM_CLKSEL_DSP_VAL		RIII_SYNC_IVA | RIII_CLKSEL_IVA | \
+					RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \
+					RIII_CLKSEL_DSP
+#define RIII_CLKSEL_GFX			(2 << 0)	/* 66.5MHz */
+#define RIII_CM_CLKSEL_GFX_VAL		RIII_CLKSEL_GFX
+
+/* 2420-PRCM II 600MHz core */
+#define RII_CLKSEL_L3			(6 << 0)	/* 100MHz */
+#define RII_CLKSEL_L4			(2 << 5)	/* 50MHz */
+#define RII_CLKSEL_USB			(2 << 25)	/* 50MHz */
+#define RII_CM_CLKSEL1_CORE_VAL		RII_CLKSEL_USB | \
+					RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
+					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+					RII_CLKSEL_L4 | RII_CLKSEL_L3
+#define RII_CLKSEL_MPU			(2 << 0)	/* 300MHz */
+#define RII_CM_CLKSEL_MPU_VAL		RII_CLKSEL_MPU
+#define RII_CLKSEL_DSP			(3 << 0)	/* c5x - 200MHz */
+#define RII_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 100MHz */
+#define RII_SYNC_DSP			(0 << 7)	/* Bypass sync */
+#define RII_CLKSEL_IVA			(6 << 8)	/* iva1 - 200MHz */
+#define RII_SYNC_IVA			(0 << 13)	/* Bypass sync */
+#define RII_CM_CLKSEL_DSP_VAL		RII_SYNC_IVA | RII_CLKSEL_IVA | \
+					RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \
+					RII_CLKSEL_DSP
+#define RII_CLKSEL_GFX			(2 << 0)	/* 50MHz */
+#define RII_CM_CLKSEL_GFX_VAL		RII_CLKSEL_GFX
+
+/* 2420-PRCM VII (boot) */
+#define RVII_CLKSEL_L3			(1 << 0)
+#define RVII_CLKSEL_L4			(1 << 5)
+#define RVII_CLKSEL_DSS1		(1 << 8)
+#define RVII_CLKSEL_DSS2		(0 << 13)
+#define RVII_CLKSEL_VLYNQ		(1 << 15)
+#define RVII_CLKSEL_SSI			(1 << 20)
+#define RVII_CLKSEL_USB			(1 << 25)
+
+#define RVII_CM_CLKSEL1_CORE_VAL	RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \
+					RVII_CLKSEL_VLYNQ | RVII_CLKSEL_DSS2 | \
+					RVII_CLKSEL_DSS1 | RVII_CLKSEL_L4 | RVII_CLKSEL_L3
+
+#define RVII_CLKSEL_MPU			(1 << 0) /* all divide by 1 */
+#define RVII_CM_CLKSEL_MPU_VAL		RVII_CLKSEL_MPU
+
+#define RVII_CLKSEL_DSP			(1 << 0)
+#define RVII_CLKSEL_DSP_IF		(1 << 5)
+#define RVII_SYNC_DSP			(0 << 7)
+#define RVII_CLKSEL_IVA			(1 << 8)
+#define RVII_SYNC_IVA			(0 << 13)
+#define RVII_CM_CLKSEL_DSP_VAL		RVII_SYNC_IVA | RVII_CLKSEL_IVA | RVII_SYNC_DSP | \
+					RVII_CLKSEL_DSP_IF | RVII_CLKSEL_DSP
+
+#define RVII_CLKSEL_GFX			(1 << 0)
+#define RVII_CM_CLKSEL_GFX_VAL		RVII_CLKSEL_GFX
+
+/*-------------------------------------------------------------------------
+ * 2430 Target modes: Along with each configuration the CPU has several
+ * modes which goes along with them. Modes mainly are the addition of
+ * describe DPLL combinations to go along with a ratio.
+ *-------------------------------------------------------------------------*/
+
+/* Hardware governed */
+#define MX_48M_SRC			(0 << 3)
+#define MX_54M_SRC			(0 << 5)
+#define MX_APLLS_CLIKIN_12		(3 << 23)
+#define MX_APLLS_CLIKIN_13		(2 << 23)
+#define MX_APLLS_CLIKIN_19_2		(0 << 23)
+
+/*
+ * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed
+ * #2	(ratio1) baseport-target
+ * #5a	(ratio1) baseport-target, target DPLL = 266*2 = 532MHz
+ */
+#define M5A_DPLL_MULT_12		(133 << 12)
+#define M5A_DPLL_DIV_12			(5 << 8)
+#define M5A_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \
+					MX_APLLS_CLIKIN_12
+#define M5A_DPLL_MULT_13		(266 << 12)
+#define M5A_DPLL_DIV_13			(12 << 8)
+#define M5A_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \
+					MX_APLLS_CLIKIN_13
+#define M5A_DPLL_MULT_19		(180 << 12)
+#define M5A_DPLL_DIV_19			(12 << 8)
+#define M5A_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \
+					MX_APLLS_CLIKIN_19_2
+/* #5b	(ratio1) target DPLL = 200*2 = 400MHz */
+#define M5B_DPLL_MULT_12		(50 << 12)
+#define M5B_DPLL_DIV_12			(2 << 8)
+#define M5B_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \
+					MX_APLLS_CLIKIN_12
+#define M5B_DPLL_MULT_13		(200 << 12)
+#define M5B_DPLL_DIV_13			(12 << 8)
+
+#define M5B_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \
+					MX_APLLS_CLIKIN_13
+#define M5B_DPLL_MULT_19		(125 << 12)
+#define M5B_DPLL_DIV_19			(31 << 8)
+#define M5B_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \
+					MX_APLLS_CLIKIN_19_2
+/*
+ * #4	(ratio2)
+ * #3	(ratio2) baseport-target, target DPLL = 330*2 = 660MHz
+ */
+#define M3_DPLL_MULT_12			(55 << 12)
+#define M3_DPLL_DIV_12			(1 << 8)
+#define M3_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \
+					MX_APLLS_CLIKIN_12
+#define M3_DPLL_MULT_13			(330 << 12)
+#define M3_DPLL_DIV_13			(12 << 8)
+#define M3_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \
+					MX_APLLS_CLIKIN_13
+#define M3_DPLL_MULT_19			(275 << 12)
+#define M3_DPLL_DIV_19			(15 << 8)
+#define M3_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \
+					MX_APLLS_CLIKIN_19_2
+/* boot (boot) */
+#define MB_DPLL_MULT			(1 << 12)
+#define MB_DPLL_DIV			(0 << 8)
+#define MB_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
+					MB_DPLL_MULT | MX_APLLS_CLIKIN_12
+
+#define MB_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
+					MB_DPLL_MULT | MX_APLLS_CLIKIN_13
+
+#define MB_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
+					MB_DPLL_MULT | MX_APLLS_CLIKIN_19
+
+/*
+ * 2430 - chassis (sedna)
+ * 165 (ratio1) same as above #2
+ * 150 (ratio1)
+ * 133 (ratio2) same as above #4
+ * 110 (ratio2) same as above #3
+ * 104 (ratio2)
+ * boot (boot)
+ */
+
+/*
+ * 2420 Equivalent - mode registers
+ * PRCM II , target DPLL = 2*300MHz = 600MHz
+ */
+#define MII_DPLL_MULT_12		(50 << 12)
+#define MII_DPLL_DIV_12			(1 << 8)
+#define MII_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
+					MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \
+					MX_APLLS_CLIKIN_12
+#define MII_DPLL_MULT_13		(300 << 12)
+#define MII_DPLL_DIV_13			(12 << 8)
+#define MII_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
+					MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \
+					MX_APLLS_CLIKIN_13
+
+/* PRCM III target DPLL = 2*266 = 532MHz*/
+#define MIII_DPLL_MULT_12		(133 << 12)
+#define MIII_DPLL_DIV_12		(5 << 8)
+#define MIII_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
+					MIII_DPLL_DIV_12 | MIII_DPLL_MULT_12 | \
+					MX_APLLS_CLIKIN_12
+#define MIII_DPLL_MULT_13		(266 << 12)
+#define MIII_DPLL_DIV_13		(12 << 8)
+#define MIII_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
+					MIII_DPLL_DIV_13 | MIII_DPLL_MULT_13 | \
+					MX_APLLS_CLIKIN_13
+
+/* PRCM VII (boot bypass) */
+#define MVII_CM_CLKSEL1_PLL_12_VAL	MB_CM_CLKSEL1_PLL_12_VAL
+#define MVII_CM_CLKSEL1_PLL_13_VAL	MB_CM_CLKSEL1_PLL_13_VAL
+
+/* High and low operation value */
+#define MX_CLKSEL2_PLL_2x_VAL		(2 << 0)
+#define MX_CLKSEL2_PLL_1x_VAL		(1 << 0)
+
+/*
+ * These represent optimal values for common parts, it won't work for all.
+ * As long as you scale down, most parameters are still work, they just
+ * become sub-optimal. The RFR value goes in the oppisite direction. If you
+ * don't adjust it down as your clock period increases the refresh interval
+ * will not be met. Setting all parameters for complete worst case may work,
+ * but may cut memory performance by 2x. Due to errata the DLLs need to be
+ * unlocked and their value needs run time calibration.	A dynamic call is
+ * need for that as no single right value exists acorss production samples.
+ *
+ * Only the FULL speed values are given. Current code is such that rate
+ * changes must be made at DPLLoutx2. The actual value adjustment for low
+ * frequency operation will be handled by omap_set_performance()
+ *
+ * By having the boot loader boot up in the fastest L4 speed available likely
+ * will result in something which you can switch between.
+ */
+#define V24XX_SDRC_RFR_CTRL_133MHz	(0x0003de00 | 1)
+#define V24XX_SDRC_RFR_CTRL_100MHz	(0x0002da01 | 1)
+#define V24XX_SDRC_RFR_CTRL_110MHz	(0x0002da01 | 1) /* Need to calc */
+#define V24XX_SDRC_RFR_CTRL_BYPASS	(0x00005000 | 1) /* Need to calc */
+
+/* MPU speed defines */
+#define S12M	12000000
+#define S13M	13000000
+#define S19M	19200000
+#define S26M	26000000
+#define S100M	100000000
+#define S133M	133000000
+#define S150M	150000000
+#define S165M	165000000
+#define S200M	200000000
+#define S266M	266000000
+#define S300M	300000000
+#define S330M	330000000
+#define S400M	400000000
+#define S532M	532000000
+#define S600M	600000000
+#define S660M	660000000
+
+/*-------------------------------------------------------------------------
+ * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
+ * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
+ * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
+ * CM_CLKSEL2_PLL, CM_CLKSEL_MDM
+ *
+ * Filling in table based on H4 boards and 2430-SDPs variants available.
+ * There are quite a few more rates combinations which could be defined.
+ *
+ * When multiple values are defiend the start up will try and choose the
+ * fastest one. If a 'fast' value is defined, then automatically, the /2
+ * one should be included as it can be used.	Generally having more that
+ * one fast set does not make sense, as static timings need to be changed
+ * to change the set.	 The exception is the bypass setting which is
+ * availble for low power bypass.
+ *
+ * Note: This table needs to be sorted, fastest to slowest.
+ *-------------------------------------------------------------------------*/
+static struct prcm_config rate_table[] = {
+	/* PRCM II - FAST */
+	{S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL,		/* 300MHz ARM */
+		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz,
+		RATE_IN_242X},
+
+	{S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL,		/* 300MHz ARM */
+		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz,
+		RATE_IN_242X},
+
+	/* PRCM III - FAST */
+	{S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
+		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz,
+		RATE_IN_242X},
+
+	{S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
+		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz,
+		RATE_IN_242X},
+
+	/* PRCM II - SLOW */
+	{S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL,		/* 150MHz ARM */
+		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz,
+		RATE_IN_242X},
+
+	{S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL,		/* 150MHz ARM */
+		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz,
+		RATE_IN_242X},
+
+	/* PRCM III - SLOW */
+	{S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
+		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz,
+		RATE_IN_242X},
+
+	{S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
+		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz,
+		RATE_IN_242X},
+
+	/* PRCM-VII (boot-bypass) */
+	{S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL,		/* 12MHz ARM*/
+		RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
+		RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_BYPASS,
+		RATE_IN_242X},
+
+	/* PRCM-VII (boot-bypass) */
+	{S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL,		/* 13MHz ARM */
+		RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
+		RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_BYPASS,
+		RATE_IN_242X},
+
+	/* PRCM #3 - ratio2 (ES2) - FAST */
+	{S13M, S660M, S330M, R2_CM_CLKSEL_MPU_VAL,		/* 330MHz ARM */
+		R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
+		R2_CM_CLKSEL1_CORE_VAL, M3_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL,
+		V24XX_SDRC_RFR_CTRL_110MHz,
+		RATE_IN_243X},
+
+	/* PRCM #5a - ratio1 - FAST */
+	{S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		V24XX_SDRC_RFR_CTRL_133MHz,
+		RATE_IN_243X},
+
+	/* PRCM #5b - ratio1 - FAST */
+	{S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL,		/* 200MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		V24XX_SDRC_RFR_CTRL_100MHz,
+		RATE_IN_243X},
+
+	/* PRCM #3 - ratio2 (ES2) - SLOW */
+	{S13M, S330M, S165M, R2_CM_CLKSEL_MPU_VAL,		/* 165MHz ARM */
+		R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
+		R2_CM_CLKSEL1_CORE_VAL, M3_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL,
+		V24XX_SDRC_RFR_CTRL_110MHz,
+		RATE_IN_243X},
+
+	/* PRCM #5a - ratio1 - SLOW */
+	{S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		V24XX_SDRC_RFR_CTRL_133MHz,
+		RATE_IN_243X},
+
+	/* PRCM #5b - ratio1 - SLOW*/
+	{S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL,		/* 100MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		V24XX_SDRC_RFR_CTRL_100MHz,
+		RATE_IN_243X},
+
+	/* PRCM-boot/bypass */
+	{S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL,		/* 13Mhz */
+		RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
+		RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
+		V24XX_SDRC_RFR_CTRL_BYPASS,
+		RATE_IN_243X},
+
+	/* PRCM-boot/bypass */
+	{S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL,		/* 12Mhz */
+		RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
+		RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
+		V24XX_SDRC_RFR_CTRL_BYPASS,
+		RATE_IN_243X},
+
+	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+};
+
+/*-------------------------------------------------------------------------
+ * 24xx clock tree.
+ *
+ * NOTE:In many cases here we are assigning a 'default' parent.	In many
+ *	cases the parent is selectable.	The get/set parent calls will also
+ *	switch sources.
+ *
+ *	Many some clocks say always_enabled, but they can be auto idled for
+ *	power savings. They will always be available upon clock request.
+ *
+ *	Several sources are given initial rates which may be wrong, this will
+ *	be fixed up in the init func.
+ *
+ *	Things are broadly separated below by clock domains. It is
+ *	noteworthy that most periferals have dependencies on multiple clock
+ *	domains. Many get their interface clocks from the L4 domain, but get
+ *	functional clocks from fixed sources or other core domain derived
+ *	clocks.
+ *-------------------------------------------------------------------------*/
+
+/* Base external input clocks */
+static struct clk func_32k_ck = {
+	.name		= "func_32k_ck",
+	.rate		= 32000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_FIXED | ALWAYS_ENABLED,
+};
+
+/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */
+static struct clk osc_ck = {		/* (*12, *13, 19.2, *26, 38.4)MHz */
+	.name		= "osc_ck",
+	.rate		= 26000000,		/* fixed up in clock init */
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
+};
+
+/* With out modem likely 12MHz, with modem likely 13MHz */
+static struct clk sys_ck = {		/* (*12, *13, 19.2, 26, 38.4)MHz */
+	.name		= "sys_ck",		/* ~ ref_clk also */
+	.parent		= &osc_ck,
+	.rate		= 13000000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
+	.rate_offset	= 6, /* sysclkdiv 1 or 2, already handled or no boot */
+	.recalc		= &omap2_sys_clk_recalc,
+};
+
+static struct clk alt_ck = {		/* Typical 54M or 48M, may not exist */
+	.name		= "alt_ck",
+	.rate		= 54000000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
+	.recalc		= &omap2_propagate_rate,
+};
+
+/*
+ * Analog domain root source clocks
+ */
+
+/* dpll_ck, is broken out in to special cases through clksel */
+static struct clk dpll_ck = {
+	.name		= "dpll_ck",
+	.parent		= &sys_ck,		/* Can be func_32k also */
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_PROPAGATES | RATE_CKCTL | CM_PLL_SEL1,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk apll96_ck = {
+	.name		= "apll96_ck",
+	.parent		= &sys_ck,
+	.rate		= 96000000,
+	.flags		= CLOCK_IN_OMAP242X |CLOCK_IN_OMAP243X |
+				RATE_FIXED | RATE_PROPAGATES,
+	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
+	.enable_bit	= 0x2,
+	.recalc		= &omap2_propagate_rate,
+};
+
+static struct clk apll54_ck = {
+	.name		= "apll54_ck",
+	.parent		= &sys_ck,
+	.rate		= 54000000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_FIXED | RATE_PROPAGATES,
+	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
+	.enable_bit	= 0x6,
+	.recalc		= &omap2_propagate_rate,
+};
+
+/*
+ * PRCM digital base sources
+ */
+static struct clk func_54m_ck = {
+	.name		= "func_54m_ck",
+	.parent		= &apll54_ck,	/* can also be alt_clk */
+	.rate		= 54000000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_FIXED | CM_PLL_SEL1 | RATE_PROPAGATES,
+	.src_offset	= 5,
+	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
+	.enable_bit	= 0xff,
+	.recalc		= &omap2_propagate_rate,
+};
+
+static struct clk core_ck = {
+	.name		= "core_ck",
+	.parent		= &dpll_ck,		/* can also be 32k */
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				ALWAYS_ENABLED | RATE_PROPAGATES,
+	.recalc		= &omap2_propagate_rate,
+};
+
+static struct clk sleep_ck = {		/* sys_clk or 32k */
+	.name		= "sleep_ck",
+	.parent		= &func_32k_ck,
+	.rate		= 32000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.recalc		= &omap2_propagate_rate,
+};
+
+static struct clk func_96m_ck = {
+	.name		= "func_96m_ck",
+	.parent		= &apll96_ck,
+	.rate		= 96000000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_FIXED | RATE_PROPAGATES,
+	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
+	.enable_bit	= 0xff,
+	.recalc		= &omap2_propagate_rate,
+};
+
+static struct clk func_48m_ck = {
+	.name		= "func_48m_ck",
+	.parent		= &apll96_ck,	 /* 96M or Alt */
+	.rate		= 48000000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_FIXED | CM_PLL_SEL1 | RATE_PROPAGATES,
+	.src_offset	= 3,
+	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
+	.enable_bit	= 0xff,
+	.recalc		= &omap2_propagate_rate,
+};
+
+static struct clk func_12m_ck = {
+	.name		= "func_12m_ck",
+	.parent		= &func_48m_ck,
+	.rate		= 12000000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_FIXED | RATE_PROPAGATES,
+	.recalc		= &omap2_propagate_rate,
+	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
+	.enable_bit	= 0xff,
+};
+
+/* Secure timer, only available in secure mode */
+static struct clk wdt1_osc_ck = {
+	.name		= "ck_wdt1_osc",
+	.parent		= &osc_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk sys_clkout = {
+	.name		= "sys_clkout",
+	.parent		= &func_54m_ck,
+	.rate		= 54000000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				CM_SYSCLKOUT_SEL1 | RATE_CKCTL,
+	.src_offset	= 0,
+	.enable_reg	= (void __iomem *)&PRCM_CLKOUT_CTRL,
+	.enable_bit	= 7,
+	.rate_offset	= 3,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* In 2430, new in 2420 ES2 */
+static struct clk sys_clkout2 = {
+	.name		= "sys_clkout2",
+	.parent		= &func_54m_ck,
+	.rate		= 54000000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				CM_SYSCLKOUT_SEL1 | RATE_CKCTL,
+	.src_offset	= 8,
+	.enable_reg	= (void __iomem *)&PRCM_CLKOUT_CTRL,
+	.enable_bit	= 15,
+	.rate_offset	= 11,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * MPU clock domain
+ *	Clocks:
+ *		MPU_FCLK, MPU_ICLK
+ *		INT_M_FCLK, INT_M_I_CLK
+ *
+ * - Individual clocks are hardware managed.
+ * - Base divider comes from: CM_CLKSEL_MPU
+ *
+ */
+static struct clk mpu_ck = {	/* Control cpu */
+	.name		= "mpu_ck",
+	.parent		= &core_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL |
+				ALWAYS_ENABLED | CM_MPU_SEL1 | DELAYED_APP |
+				CONFIG_PARTICIPANT | RATE_PROPAGATES,
+	.rate_offset	= 0,	/* bits 0-4 */
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * DSP (2430-IVA2.1) (2420-UMA+IVA1) clock domain
+ * Clocks:
+ *	2430: IVA2.1_FCLK, IVA2.1_ICLK
+ *	2420: UMA_FCLK, UMA_ICLK, IVA_MPU, IVA_COP
+ */
+static struct clk iva2_1_fck = {
+	.name		= "iva2_1_fck",
+	.parent		= &core_ck,
+	.flags		= CLOCK_IN_OMAP243X | RATE_CKCTL | CM_DSP_SEL1 |
+				DELAYED_APP | RATE_PROPAGATES |
+				CONFIG_PARTICIPANT,
+	.rate_offset	= 0,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN_DSP,
+	.enable_bit	= 0,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk iva2_1_ick = {
+	.name		= "iva2_1_ick",
+	.parent		= &iva2_1_fck,
+	.flags		= CLOCK_IN_OMAP243X | RATE_CKCTL | CM_DSP_SEL1 |
+				DELAYED_APP | CONFIG_PARTICIPANT,
+	.rate_offset	= 5,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * Won't be too specific here. The core clock comes into this block
+ * it is divided then tee'ed. One branch goes directly to xyz enable
+ * controls. The other branch gets further divided by 2 then possibly
+ * routed into a synchronizer and out of clocks abc.
+ */
+static struct clk dsp_fck = {
+	.name		= "dsp_fck",
+	.parent		= &core_ck,
+	.flags		= CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1 |
+			DELAYED_APP | CONFIG_PARTICIPANT | RATE_PROPAGATES,
+	.rate_offset	= 0,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN_DSP,
+	.enable_bit	= 0,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk dsp_ick = {
+	.name		= "dsp_ick",	 /* apparently ipi and isp */
+	.parent		= &dsp_fck,
+	.flags		= CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1 |
+				DELAYED_APP | CONFIG_PARTICIPANT,
+	.rate_offset = 5,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN_DSP,
+	.enable_bit	= 1,		/* for ipi */
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk iva1_ifck = {
+	.name		= "iva1_ifck",
+	.parent		= &core_ck,
+	.flags		= CLOCK_IN_OMAP242X | CM_DSP_SEL1 | RATE_CKCTL |
+			CONFIG_PARTICIPANT | RATE_PROPAGATES | DELAYED_APP,
+	.rate_offset= 8,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN_DSP,
+	.enable_bit	= 10,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* IVA1 mpu/int/i/f clocks are /2 of parent */
+static struct clk iva1_mpu_int_ifck = {
+	.name		= "iva1_mpu_int_ifck",
+	.parent		= &iva1_ifck,
+	.flags		= CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN_DSP,
+	.enable_bit	= 8,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * L3 clock domain
+ * L3 clocks are used for both interface and functional clocks to
+ * multiple entities. Some of these clocks are completely managed
+ * by hardware, and some others allow software control. Hardware
+ * managed ones general are based on directly CLK_REQ signals and
+ * various auto idle settings. The functional spec sets many of these
+ * as 'tie-high' for their enables.
+ *
+ * I-CLOCKS:
+ *	L3-Interconnect, SMS, GPMC, SDRC, OCM_RAM, OCM_ROM, SDMA
+ *	CAM, HS-USB.
+ * F-CLOCK
+ *	SSI.
+ *
+ * GPMC memories and SDRC have timing and clock sensitive registers which
+ * may very well need notification when the clock changes. Currently for low
+ * operating points, these are taken care of in sleep.S.
+ */
+static struct clk core_l3_ck = {	/* Used for ick and fck, interconnect */
+	.name		= "core_l3_ck",
+	.parent		= &core_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_CKCTL | ALWAYS_ENABLED | CM_CORE_SEL1 |
+				DELAYED_APP | CONFIG_PARTICIPANT |
+				RATE_PROPAGATES,
+	.rate_offset	= 0,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk usb_l4_ick = {	/* FS-USB interface clock */
+	.name		= "usb_l4_ick",
+	.parent		= &core_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP |
+				CONFIG_PARTICIPANT,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
+	.enable_bit	= 0,
+	.rate_offset = 25,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * SSI is in L3 management domain, its direct parent is core not l3,
+ * many core power domain entities are grouped into the L3 clock
+ * domain.
+ * SSI_SSR_FCLK, SSI_SST_FCLK, SSI_L4_CLIK
+ *
+ * ssr = core/1/2/3/4/5, sst = 1/2 ssr.
+ */
+static struct clk ssi_ssr_sst_fck = {
+	.name		= "ssi_fck",
+	.parent		= &core_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,	/* bit 1 */
+	.enable_bit	= 1,
+	.rate_offset = 20,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * GFX clock domain
+ *	Clocks:
+ * GFX_FCLK, GFX_ICLK
+ * GFX_CG1(2d), GFX_CG2(3d)
+ *
+ * GFX_FCLK runs from L3, and is divided by (1,2,3,4)
+ * The 2d and 3d clocks run at a hardware determined
+ * divided value of fclk.
+ *
+ */
+static struct clk gfx_3d_fck = {
+	.name		= "gfx_3d_fck",
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_CKCTL | CM_GFX_SEL1,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN_GFX,
+	.enable_bit	= 2,
+	.rate_offset= 0,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gfx_2d_fck = {
+	.name		= "gfx_2d_fck",
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_CKCTL | CM_GFX_SEL1,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN_GFX,
+	.enable_bit	= 1,
+	.rate_offset= 0,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gfx_ick = {
+	.name		= "gfx_ick",		/* From l3 */
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_CKCTL,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN_GFX,	/* bit 0 */
+	.enable_bit	= 0,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+/*
+ * Modem clock domain (2430)
+ *	CLOCKS:
+ *		MDM_OSC_CLK
+ *		MDM_ICLK
+ */
+static struct clk mdm_ick = {		/* used both as a ick and fck */
+	.name		= "mdm_ick",
+	.parent		= &core_ck,
+	.flags		= CLOCK_IN_OMAP243X | RATE_CKCTL | CM_MODEM_SEL1 |
+				DELAYED_APP | CONFIG_PARTICIPANT,
+	.rate_offset	= 0,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN_MDM,
+	.enable_bit	= 0,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk mdm_osc_ck = {
+	.name		= "mdm_osc_ck",
+	.rate		= 26000000,
+	.parent		= &osc_ck,
+	.flags		= CLOCK_IN_OMAP243X | RATE_FIXED,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN_MDM,
+	.enable_bit	= 1,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+/*
+ * L4 clock management domain
+ *
+ * This domain contains lots of interface clocks from the L4 interface, some
+ * functional clocks.	Fixed APLL functional source clocks are managed in
+ * this domain.
+ */
+static struct clk l4_ck = {		/* used both as an ick and fck */
+	.name		= "l4_ck",
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_CKCTL | ALWAYS_ENABLED | CM_CORE_SEL1 |
+				DELAYED_APP | RATE_PROPAGATES,
+	.rate_offset	= 5,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk ssi_l4_ick = {
+	.name		= "ssi_l4_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,	/* bit 1 */
+	.enable_bit	= 1,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+/*
+ * DSS clock domain
+ * CLOCKs:
+ * DSS_L4_ICLK, DSS_L3_ICLK,
+ * DSS_CLK1, DSS_CLK2, DSS_54MHz_CLK
+ *
+ * DSS is both initiator and target.
+ */
+static struct clk dss_ick = {		/* Enables both L3,L4 ICLK's */
+	.name		= "dss_ick",
+	.parent		= &l4_ck,	/* really both l3 and l4 */
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 0,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk dss1_fck = {
+	.name		= "dss1_fck",
+	.parent		= &core_ck,		/* Core or sys */
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 0,
+	.rate_offset	= 8,
+	.src_offset	= 8,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk dss2_fck = {		/* Alt clk used in power management */
+	.name		= "dss2_fck",
+	.parent		= &sys_ck,		/* fixed at sys_ck or 48MHz */
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_CKCTL | CM_CORE_SEL1 | RATE_FIXED,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 1,
+	.src_offset	= 13,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk dss_54m_fck = {	/* Alt clk used in power management */
+	.name		= "dss_54m_fck",	/* 54m tv clk */
+	.parent		= &func_54m_ck,
+	.rate		= 54000000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_FIXED | RATE_PROPAGATES,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 2,
+	.recalc		= &omap2_propagate_rate,
+};
+
+/*
+ * CORE power domain ICLK & FCLK defines.
+ * Many of the these can have more than one possible parent. Entries
+ * here will likely have an L4 interface parent, and may have multiple
+ * functional clock parents.
+ */
+static struct clk gpt1_ick = {
+	.name		= "gpt1_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,	/* Bit4 */
+	.enable_bit	= 0,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt1_fck = {
+	.name		= "gpt1_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				CM_WKUP_SEL1,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN_WKUP,
+	.enable_bit	= 0,
+	.src_offset	= 0,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt2_ick = {
+	.name		= "gpt2_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	/* bit4 */
+	.enable_bit	= 0,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt2_fck = {
+	.name		= "gpt2_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				CM_CORE_SEL2,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 4,
+	.src_offset	= 2,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt3_ick = {
+	.name		= "gpt3_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	/* Bit5 */
+	.enable_bit	= 5,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt3_fck = {
+	.name		= "gpt3_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				CM_CORE_SEL2,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 5,
+	.src_offset	= 4,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt4_ick = {
+	.name		= "gpt4_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	/* Bit6 */
+	.enable_bit	= 6,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt4_fck = {
+	.name		= "gpt4_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				CM_CORE_SEL2,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 6,
+	.src_offset	= 6,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt5_ick = {
+	.name		= "gpt5_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* Bit7 */
+	.enable_bit	= 7,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt5_fck = {
+	.name		= "gpt5_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				CM_CORE_SEL2,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 7,
+	.src_offset	= 8,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt6_ick = {
+	.name		= "gpt6_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_bit	= 8,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* bit8 */
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt6_fck = {
+	.name		= "gpt6_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				CM_CORE_SEL2,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 8,
+	.src_offset	= 10,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt7_ick = {
+	.name		= "gpt7_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* bit9 */
+	.enable_bit	= 9,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt7_fck = {
+	.name		= "gpt7_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				CM_CORE_SEL2,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 9,
+	.src_offset	= 12,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt8_ick = {
+	.name		= "gpt8_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* bit10 */
+	.enable_bit	= 10,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt8_fck = {
+	.name		= "gpt8_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				CM_CORE_SEL2,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 10,
+	.src_offset	= 14,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt9_ick = {
+	.name		= "gpt9_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 11,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt9_fck = {
+	.name		= "gpt9_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+					CM_CORE_SEL2,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 11,
+	.src_offset	= 16,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt10_ick = {
+	.name		= "gpt10_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 12,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt10_fck = {
+	.name		= "gpt10_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+					CM_CORE_SEL2,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 12,
+	.src_offset	= 18,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt11_ick = {
+	.name		= "gpt11_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 13,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt11_fck = {
+	.name		= "gpt11_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+					CM_CORE_SEL2,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 13,
+	.src_offset	= 20,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt12_ick = {
+	.name		= "gpt12_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* bit14 */
+	.enable_bit	= 14,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt12_fck = {
+	.name		= "gpt12_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+					CM_CORE_SEL2,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 14,
+	.src_offset	= 22,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mcbsp1_ick = {
+	.name		= "mcbsp1_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_bit	= 15,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* bit16 */
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mcbsp1_fck = {
+	.name		= "mcbsp1_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_bit	= 15,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mcbsp2_ick = {
+	.name		= "mcbsp2_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_bit	= 16,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mcbsp2_fck = {
+	.name		= "mcbsp2_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_bit	= 16,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mcbsp3_ick = {
+	.name		= "mcbsp3_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
+	.enable_bit	= 3,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mcbsp3_fck = {
+	.name		= "mcbsp3_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
+	.enable_bit	= 3,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mcbsp4_ick = {
+	.name		= "mcbsp4_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
+	.enable_bit	= 4,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mcbsp4_fck = {
+	.name		= "mcbsp4_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
+	.enable_bit	= 4,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mcbsp5_ick = {
+	.name		= "mcbsp5_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
+	.enable_bit	= 5,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mcbsp5_fck = {
+	.name		= "mcbsp5_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
+	.enable_bit	= 5,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mcspi1_ick = {
+	.name		= "mcspi1_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 17,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mcspi1_fck = {
+	.name		= "mcspi1_fck",
+	.parent		= &func_48m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 17,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mcspi2_ick = {
+	.name		= "mcspi2_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 18,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mcspi2_fck = {
+	.name		= "mcspi2_fck",
+	.parent		= &func_48m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 18,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mcspi3_ick = {
+	.name		= "mcspi3_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
+	.enable_bit	= 9,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mcspi3_fck = {
+	.name		= "mcspi3_fck",
+	.parent		= &func_48m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
+	.enable_bit	= 9,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk uart1_ick = {
+	.name		= "uart1_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 21,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk uart1_fck = {
+	.name		= "uart1_fck",
+	.parent		= &func_48m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 21,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk uart2_ick = {
+	.name		= "uart2_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 22,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk uart2_fck = {
+	.name		= "uart2_fck",
+	.parent		= &func_48m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 22,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk uart3_ick = {
+	.name		= "uart3_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
+	.enable_bit	= 2,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk uart3_fck = {
+	.name		= "uart3_fck",
+	.parent		= &func_48m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
+	.enable_bit	= 2,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpios_ick = {
+	.name		= "gpios_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
+	.enable_bit	= 2,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpios_fck = {
+	.name		= "gpios_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN_WKUP,
+	.enable_bit	= 2,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mpu_wdt_ick = {
+	.name		= "mpu_wdt_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
+	.enable_bit	= 3,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mpu_wdt_fck = {
+	.name		= "mpu_wdt_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN_WKUP,
+	.enable_bit	= 3,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk sync_32k_ick = {
+	.name		= "sync_32k_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
+	.enable_bit	= 1,
+	.recalc		= &omap2_followparent_recalc,
+};
+static struct clk wdt1_ick = {
+	.name		= "wdt1_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
+	.enable_bit	= 4,
+	.recalc		= &omap2_followparent_recalc,
+};
+static struct clk omapctrl_ick = {
+	.name		= "omapctrl_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
+	.enable_bit	= 5,
+	.recalc		= &omap2_followparent_recalc,
+};
+static struct clk icr_ick = {
+	.name		= "icr_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
+	.enable_bit	= 6,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk cam_ick = {
+	.name		= "cam_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 31,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk cam_fck = {
+	.name		= "cam_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 31,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mailboxes_ick = {
+	.name		= "mailboxes_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 30,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk wdt4_ick = {
+	.name		= "wdt4_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 29,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk wdt4_fck = {
+	.name		= "wdt4_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 29,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk wdt3_ick = {
+	.name		= "wdt3_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 28,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk wdt3_fck = {
+	.name		= "wdt3_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 28,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mspro_ick = {
+	.name		= "mspro_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 27,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mspro_fck = {
+	.name		= "mspro_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 27,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mmc_ick = {
+	.name		= "mmc_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 26,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mmc_fck = {
+	.name		= "mmc_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 26,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk fac_ick = {
+	.name		= "fac_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 25,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk fac_fck = {
+	.name		= "fac_fck",
+	.parent		= &func_12m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 25,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk eac_ick = {
+	.name		= "eac_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 24,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk eac_fck = {
+	.name		= "eac_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 24,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk hdq_ick = {
+	.name		= "hdq_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 23,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk hdq_fck = {
+	.name		= "hdq_fck",
+	.parent		= &func_12m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 23,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk i2c2_ick = {
+	.name		= "i2c2_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 20,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk i2c2_fck = {
+	.name		= "i2c2_fck",
+	.parent		= &func_12m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 20,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk i2chs2_fck = {
+	.name		= "i2chs2_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
+	.enable_bit	= 20,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk i2c1_ick = {
+	.name		= "i2c1_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 19,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk i2c1_fck = {
+	.name		= "i2c1_fck",
+	.parent		= &func_12m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 19,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk i2chs1_fck = {
+	.name		= "i2chs1_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
+	.enable_bit	= 19,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk vlynq_ick = {
+	.name		= "vlynq_ick",
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 3,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk vlynq_fck = {
+	.name		= "vlynq_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP242X  | RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 3,
+	.src_offset	= 15,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk sdrc_ick = {
+	.name		= "sdrc_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN3_CORE,
+	.enable_bit	= 2,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk des_ick = {
+	.name		= "des_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN4_CORE,
+	.enable_bit	= 0,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk sha_ick = {
+	.name		= "sha_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN4_CORE,
+	.enable_bit	= 1,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk rng_ick = {
+	.name		= "rng_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN4_CORE,
+	.enable_bit	= 2,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk aes_ick = {
+	.name		= "aes_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN4_CORE,
+	.enable_bit	= 3,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk pka_ick = {
+	.name		= "pka_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN4_CORE,
+	.enable_bit	= 4,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk usb_fck = {
+	.name		= "usb_fck",
+	.parent		= &func_48m_ck,
+	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
+	.enable_bit	= 0,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk usbhs_ick = {
+	.name		= "usbhs_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
+	.enable_bit	= 6,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mmchs1_ick = {
+	.name		= "mmchs1_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
+	.enable_bit	= 7,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mmchs1_fck = {
+	.name		= "mmchs1_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
+	.enable_bit	= 7,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mmchs2_ick = {
+	.name		= "mmchs2_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
+	.enable_bit	= 8,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mmchs2_fck = {
+	.name		= "mmchs2_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
+	.enable_bit	= 8,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpio5_ick = {
+	.name		= "gpio5_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
+	.enable_bit	= 10,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpio5_fck = {
+	.name		= "gpio5_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
+	.enable_bit	= 10,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mdm_intc_ick = {
+	.name		= "mdm_intc_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
+	.enable_bit	= 11,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mmchsdb1_fck = {
+	.name		= "mmchsdb1_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
+	.enable_bit	= 16,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mmchsdb2_fck = {
+	.name		= "mmchsdb2_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
+	.enable_bit	= 17,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+/*
+ * This clock is a composite clock which does entire set changes then
+ * forces a rebalance. It keys on the MPU speed, but it really could
+ * be any key speed part of a set in the rate table.
+ *
+ * to really change a set, you need memory table sets which get changed
+ * in sram, pre-notifiers & post notifiers, changing the top set, without
+ * having low level display recalc's won't work... this is why dpm notifiers
+ * work, isr's off, walk a list of clocks already _off_ and not messing with
+ * the bus.
+ *
+ * This clock should have no parent. It embodies the entire upper level
+ * active set. A parent will mess up some of the init also.
+ */
+static struct clk virt_prcm_set = {
+	.name		= "virt_prcm_set",
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				VIRTUAL_CLOCK | ALWAYS_ENABLED | DELAYED_APP,
+	.parent		= &mpu_ck,	/* Indexed by mpu speed, no parent */
+	.recalc		= &omap2_mpu_recalc,	/* sets are keyed on mpu rate */
+	.set_rate	= &omap2_select_table_rate,
+	.round_rate	= &omap2_round_to_table_rate,
+};
+
+static struct clk *onchip_clks[] = {
+	/* external root sources */
+	&func_32k_ck,
+	&osc_ck,
+	&sys_ck,
+	&alt_ck,
+	/* internal analog sources */
+	&dpll_ck,
+	&apll96_ck,
+	&apll54_ck,
+	/* internal prcm root sources */
+	&func_54m_ck,
+	&core_ck,
+	&sleep_ck,
+	&func_96m_ck,
+	&func_48m_ck,
+	&func_12m_ck,
+	&wdt1_osc_ck,
+	&sys_clkout,
+	&sys_clkout2,
+	/* mpu domain clocks */
+	&mpu_ck,
+	/* dsp domain clocks */
+	&iva2_1_fck,		/* 2430 */
+	&iva2_1_ick,
+	&dsp_ick,		/* 2420 */
+	&dsp_fck,
+	&iva1_ifck,
+	&iva1_mpu_int_ifck,
+	/* GFX domain clocks */
+	&gfx_3d_fck,
+	&gfx_2d_fck,
+	&gfx_ick,
+	/* Modem domain clocks */
+	&mdm_ick,
+	&mdm_osc_ck,
+	/* DSS domain clocks */
+	&dss_ick,
+	&dss1_fck,
+	&dss2_fck,
+	&dss_54m_fck,
+	/* L3 domain clocks */
+	&core_l3_ck,
+	&ssi_ssr_sst_fck,
+	&usb_l4_ick,
+	/* L4 domain clocks */
+	&l4_ck,			/* used as both core_l4 and wu_l4 */
+	&ssi_l4_ick,
+	/* virtual meta-group clock */
+	&virt_prcm_set,
+	/* general l4 interface ck, multi-parent functional clk */
+	&gpt1_ick,
+	&gpt1_fck,
+	&gpt2_ick,
+	&gpt2_fck,
+	&gpt3_ick,
+	&gpt3_fck,
+	&gpt4_ick,
+	&gpt4_fck,
+	&gpt5_ick,
+	&gpt5_fck,
+	&gpt6_ick,
+	&gpt6_fck,
+	&gpt7_ick,
+	&gpt7_fck,
+	&gpt8_ick,
+	&gpt8_fck,
+	&gpt9_ick,
+	&gpt9_fck,
+	&gpt10_ick,
+	&gpt10_fck,
+	&gpt11_ick,
+	&gpt11_fck,
+	&gpt12_ick,
+	&gpt12_fck,
+	&mcbsp1_ick,
+	&mcbsp1_fck,
+	&mcbsp2_ick,
+	&mcbsp2_fck,
+	&mcbsp3_ick,
+	&mcbsp3_fck,
+	&mcbsp4_ick,
+	&mcbsp4_fck,
+	&mcbsp5_ick,
+	&mcbsp5_fck,
+	&mcspi1_ick,
+	&mcspi1_fck,
+	&mcspi2_ick,
+	&mcspi2_fck,
+	&mcspi3_ick,
+	&mcspi3_fck,
+	&uart1_ick,
+	&uart1_fck,
+	&uart2_ick,
+	&uart2_fck,
+	&uart3_ick,
+	&uart3_fck,
+	&gpios_ick,
+	&gpios_fck,
+	&mpu_wdt_ick,
+	&mpu_wdt_fck,
+	&sync_32k_ick,
+	&wdt1_ick,
+	&omapctrl_ick,
+	&icr_ick,
+	&cam_fck,
+	&cam_ick,
+	&mailboxes_ick,
+	&wdt4_ick,
+	&wdt4_fck,
+	&wdt3_ick,
+	&wdt3_fck,
+	&mspro_ick,
+	&mspro_fck,
+	&mmc_ick,
+	&mmc_fck,
+	&fac_ick,
+	&fac_fck,
+	&eac_ick,
+	&eac_fck,
+	&hdq_ick,
+	&hdq_fck,
+	&i2c1_ick,
+	&i2c1_fck,
+	&i2chs1_fck,
+	&i2c2_ick,
+	&i2c2_fck,
+	&i2chs2_fck,
+	&vlynq_ick,
+	&vlynq_fck,
+	&sdrc_ick,
+	&des_ick,
+	&sha_ick,
+	&rng_ick,
+	&aes_ick,
+	&pka_ick,
+	&usb_fck,
+	&usbhs_ick,
+	&mmchs1_ick,
+	&mmchs1_fck,
+	&mmchs2_ick,
+	&mmchs2_fck,
+	&gpio5_ick,
+	&gpio5_fck,
+	&mdm_intc_ick,
+	&mmchsdb1_fck,
+	&mmchsdb2_fck,
+};
+
+#endif
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
new file mode 100644
index 000000000000..7181edb89352
--- /dev/null
+++ b/arch/arm/mach-omap2/devices.c
@@ -0,0 +1,89 @@
+/*
+ * linux/arch/arm/mach-omap2/devices.c
+ *
+ * OMAP2 platform device setup/initialization
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/tc.h>
+#include <asm/arch/board.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/gpio.h>
+
+extern void omap_nop_release(struct device *dev);
+
+/*-------------------------------------------------------------------------*/
+
+#if 	defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
+
+#define OMAP2_I2C_BASE2		0x48072000
+#define OMAP2_I2C_INT2		57
+
+static struct resource i2c_resources2[] = {
+	{
+		.start		= OMAP2_I2C_BASE2,
+		.end		= OMAP2_I2C_BASE2 + 0x3f,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP2_I2C_INT2,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device omap_i2c_device2 = {
+        .name           = "i2c_omap",
+        .id             = 2,
+        .dev = {
+                .release        = omap_nop_release,
+        },
+	.num_resources	= ARRAY_SIZE(i2c_resources2),
+	.resource	= i2c_resources2,
+};
+
+/* See also arch/arm/plat-omap/devices.c for first I2C on 24xx */
+static void omap_init_i2c(void)
+{
+	/* REVISIT: Second I2C not in use on H4? */
+	if (machine_is_omap_h4())
+		return;
+
+	omap_cfg_reg(J15_24XX_I2C2_SCL);
+	omap_cfg_reg(H19_24XX_I2C2_SDA);
+	(void) platform_device_register(&omap_i2c_device2);
+}
+
+#else
+
+static void omap_init_i2c(void) {}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+static int __init omap2_init_devices(void)
+{
+	/* please keep these calls, and their implementations above,
+	 * in alphabetical order so they're easier to sort through.
+	 */
+	omap_init_i2c();
+
+	return 0;
+}
+arch_initcall(omap2_init_devices);
+
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
new file mode 100644
index 000000000000..76187300f2b6
--- /dev/null
+++ b/arch/arm/mach-omap2/id.c
@@ -0,0 +1,124 @@
+/*
+ * linux/arch/arm/mach-omap2/id.c
+ *
+ * OMAP2 CPU identification code
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Written by Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+
+#define OMAP24XX_TAP_BASE	io_p2v(0x48014000)
+
+#define OMAP_TAP_IDCODE		0x0204
+#define OMAP_TAP_PROD_ID	0x0208
+
+#define OMAP_TAP_DIE_ID_0	0x0218
+#define OMAP_TAP_DIE_ID_1	0x021C
+#define OMAP_TAP_DIE_ID_2	0x0220
+#define OMAP_TAP_DIE_ID_3	0x0224
+
+/* system_rev fields for OMAP2 processors:
+ *   CPU id bits     [31:16],
+ *   CPU device type [15:12], (unprg,normal,POP)
+ *   CPU revision    [11:08]
+ *   CPU class bits  [07:00]
+ */
+
+struct omap_id {
+	u16	hawkeye;	/* Silicon type (Hawkeye id) */
+	u8	dev;		/* Device type from production_id reg */
+	u32	type;		/* combined type id copied to system_rev */
+};
+
+/* Register values to detect the OMAP version */
+static struct omap_id omap_ids[] __initdata = {
+	{ .hawkeye = 0xb5d9, .dev = 0x0, .type = 0x24200000 },
+	{ .hawkeye = 0xb5d9, .dev = 0x1, .type = 0x24201000 },
+	{ .hawkeye = 0xb5d9, .dev = 0x2, .type = 0x24202000 },
+	{ .hawkeye = 0xb5d9, .dev = 0x4, .type = 0x24220000 },
+	{ .hawkeye = 0xb5d9, .dev = 0x8, .type = 0x24230000 },
+	{ .hawkeye = 0xb68a, .dev = 0x0, .type = 0x24300000 },
+};
+
+static u32 __init read_tap_reg(int reg)
+{
+	return __raw_readl(OMAP24XX_TAP_BASE + reg);
+}
+
+void __init omap2_check_revision(void)
+{
+	int i, j;
+	u32 idcode;
+	u32 prod_id;
+	u16 hawkeye;
+	u8  dev_type;
+	u8  rev;
+
+	idcode = read_tap_reg(OMAP_TAP_IDCODE);
+	prod_id = read_tap_reg(OMAP_TAP_PROD_ID);
+	hawkeye = (idcode >> 12) & 0xffff;
+	rev = (idcode >> 28) & 0x0f;
+	dev_type = (prod_id >> 16) & 0x0f;
+
+#ifdef DEBUG
+	printk(KERN_DEBUG "OMAP_TAP_IDCODE 0x%08x REV %i HAWKEYE 0x%04x MANF %03x\n",
+		idcode, rev, hawkeye, (idcode >> 1) & 0x7ff);
+	printk(KERN_DEBUG "OMAP_TAP_DIE_ID_0: 0x%08x\n",
+		read_tap_reg(OMAP_TAP_DIE_ID_0));
+	printk(KERN_DEBUG "OMAP_TAP_DIE_ID_1: 0x%08x DEV_REV: %i\n",
+		read_tap_reg(OMAP_TAP_DIE_ID_1),
+	       (read_tap_reg(OMAP_TAP_DIE_ID_1) >> 28) & 0xf);
+	printk(KERN_DEBUG "OMAP_TAP_DIE_ID_2: 0x%08x\n",
+		read_tap_reg(OMAP_TAP_DIE_ID_2));
+	printk(KERN_DEBUG "OMAP_TAP_DIE_ID_3: 0x%08x\n",
+		read_tap_reg(OMAP_TAP_DIE_ID_3));
+	printk(KERN_DEBUG "OMAP_TAP_PROD_ID_0: 0x%08x DEV_TYPE: %i\n",
+		prod_id, dev_type);
+#endif
+
+	/* Check hawkeye ids */
+	for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
+		if (hawkeye == omap_ids[i].hawkeye)
+			break;
+	}
+
+	if (i == ARRAY_SIZE(omap_ids)) {
+		printk(KERN_ERR "Unknown OMAP CPU id\n");
+		return;
+	}
+
+	for (j = i; j < ARRAY_SIZE(omap_ids); j++) {
+		if (dev_type == omap_ids[j].dev)
+			break;
+	}
+
+	if (j == ARRAY_SIZE(omap_ids)) {
+		printk(KERN_ERR "Unknown OMAP device type. "
+				"Handling it as OMAP%04x\n",
+				omap_ids[i].type >> 16);
+		j = i;
+	}
+	system_rev = omap_ids[j].type;
+
+	system_rev |= rev << 8;
+
+	/* Add the cpu class info (24xx) */
+	system_rev |= 0x24;
+
+	pr_info("OMAP%04x", system_rev >> 16);
+	if ((system_rev >> 8) & 0x0f)
+		printk("%x", (system_rev >> 8) & 0x0f);
+	printk("\n");
+}
+
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
new file mode 100644
index 000000000000..8ea67bf196a5
--- /dev/null
+++ b/arch/arm/mach-omap2/io.c
@@ -0,0 +1,53 @@
+/*
+ * linux/arch/arm/mach-omap2/io.c
+ *
+ * OMAP2 I/O mapping code
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/mach/map.h>
+#include <asm/io.h>
+#include <asm/arch/mux.h>
+
+extern void omap_sram_init(void);
+extern int omap2_clk_init(void);
+extern void omap2_check_revision(void);
+
+/*
+ * The machine specific code may provide the extra mapping besides the
+ * default mapping provided here.
+ */
+static struct map_desc omap2_io_desc[] __initdata = {
+	{
+		.virtual	= L3_24XX_VIRT,
+		.pfn		= __phys_to_pfn(L3_24XX_PHYS),
+		.length		= L3_24XX_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= L4_24XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_24XX_PHYS),
+		.length		= L4_24XX_SIZE,
+		.type		= MT_DEVICE
+	}
+};
+
+void __init omap_map_common_io(void)
+{
+	iotable_init(omap2_io_desc, ARRAY_SIZE(omap2_io_desc));
+	omap2_check_revision();
+	omap_sram_init();
+	omap2_mux_init();
+	omap2_clk_init();
+}
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
new file mode 100644
index 000000000000..d7baff675cfe
--- /dev/null
+++ b/arch/arm/mach-omap2/irq.c
@@ -0,0 +1,149 @@
+/*
+ * linux/arch/arm/mach-omap/omap2/irq.c
+ *
+ * Interrupt handler for OMAP2 boards.
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Paul Mundt <paul.mundt@nokia.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/config.h>
+#include <linux/interrupt.h>
+#include <asm/hardware.h>
+#include <asm/mach/irq.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#define INTC_REVISION	0x0000
+#define INTC_SYSCONFIG	0x0010
+#define INTC_SYSSTATUS	0x0014
+#define INTC_CONTROL	0x0048
+#define INTC_MIR_CLEAR0	0x0088
+#define INTC_MIR_SET0	0x008c
+
+/*
+ * OMAP2 has a number of different interrupt controllers, each interrupt
+ * controller is identified as its own "bank". Register definitions are
+ * fairly consistent for each bank, but not all registers are implemented
+ * for each bank.. when in doubt, consult the TRM.
+ */
+static struct omap_irq_bank {
+	unsigned long base_reg;
+	unsigned int nr_irqs;
+} __attribute__ ((aligned(4))) irq_banks[] = {
+	{
+		/* MPU INTC */
+		.base_reg	= OMAP24XX_IC_BASE,
+		.nr_irqs	= 96,
+	}, {
+		/* XXX: DSP INTC */
+
+#if 0
+	/*
+	 * Commented out for now until we fix the IVA clocking
+	 */
+#ifdef CONFIG_ARCH_OMAP2420
+	}, {
+		/* IVA INTC (2420 only) */
+		.base_reg	= OMAP24XX_IVA_INTC_BASE,
+		.nr_irqs	= 16,	/* Actually 32, but only 16 are used */
+#endif
+#endif
+	}
+};
+
+/* XXX: FIQ and additional INTC support (only MPU at the moment) */
+static void omap_ack_irq(unsigned int irq)
+{
+	omap_writel(0x1, irq_banks[0].base_reg + INTC_CONTROL);
+}
+
+static void omap_mask_irq(unsigned int irq)
+{
+	int offset = (irq >> 5) << 5;
+
+	if (irq >= 64) {
+		irq %= 64;
+	} else if (irq >= 32) {
+		irq %= 32;
+	}
+
+	omap_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_SET0 + offset);
+}
+
+static void omap_unmask_irq(unsigned int irq)
+{
+	int offset = (irq >> 5) << 5;
+
+	if (irq >= 64) {
+		irq %= 64;
+	} else if (irq >= 32) {
+		irq %= 32;
+	}
+
+	omap_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_CLEAR0 + offset);
+}
+
+static void omap_mask_ack_irq(unsigned int irq)
+{
+	omap_mask_irq(irq);
+	omap_ack_irq(irq);
+}
+
+static struct irqchip omap_irq_chip = {
+	.ack	= omap_mask_ack_irq,
+	.mask	= omap_mask_irq,
+	.unmask	= omap_unmask_irq,
+};
+
+static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
+{
+	unsigned long tmp;
+
+	tmp = omap_readl(bank->base_reg + INTC_REVISION) & 0xff;
+	printk(KERN_INFO "IRQ: Found an INTC at 0x%08lx "
+			 "(revision %ld.%ld) with %d interrupts\n",
+			 bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs);
+
+	tmp = omap_readl(bank->base_reg + INTC_SYSCONFIG);
+	tmp |= 1 << 1;	/* soft reset */
+	omap_writel(tmp, bank->base_reg + INTC_SYSCONFIG);
+
+	while (!(omap_readl(bank->base_reg + INTC_SYSSTATUS) & 0x1))
+		/* Wait for reset to complete */;
+}
+
+void __init omap_init_irq(void)
+{
+	unsigned long nr_irqs = 0;
+	unsigned int nr_banks = 0;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
+		struct omap_irq_bank *bank = irq_banks + i;
+
+		/* XXX */
+		if (!bank->base_reg)
+			continue;
+
+		omap_irq_bank_init_one(bank);
+
+		nr_irqs += bank->nr_irqs;
+		nr_banks++;
+	}
+
+	printk(KERN_INFO "Total of %ld interrupts on %d active controller%s\n",
+	       nr_irqs, nr_banks, nr_banks > 1 ? "s" : "");
+
+	for (i = 0; i < nr_irqs; i++) {
+		set_irq_chip(i, &omap_irq_chip);
+		set_irq_handler(i, do_level_IRQ);
+		set_irq_flags(i, IRQF_VALID);
+	}
+}
+
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
new file mode 100644
index 000000000000..ea4654815dd1
--- /dev/null
+++ b/arch/arm/mach-omap2/mux.c
@@ -0,0 +1,65 @@
+/*
+ * linux/arch/arm/mach-omap2/mux.c
+ *
+ * OMAP1 pin multiplexing configurations
+ *
+ * Copyright (C) 2003 - 2005 Nokia Corporation
+ *
+ * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <linux/spinlock.h>
+
+#include <asm/arch/mux.h>
+
+#ifdef CONFIG_OMAP_MUX
+
+/* NOTE: See mux.h for the enumeration */
+
+struct pin_config __initdata_or_module omap24xx_pins[] = {
+/*
+ *	description			mux	mux	pull	pull	debug
+ *					offset	mode	ena	type
+ */
+
+/* 24xx I2C */
+MUX_CFG_24XX("M19_24XX_I2C1_SCL",	0x111,	0,	0,	0,	1)
+MUX_CFG_24XX("L15_24XX_I2C1_SDA",	0x112,	0,	0,	0,	1)
+MUX_CFG_24XX("J15_24XX_I2C2_SCL",	0x113,	0,	0,	0,	1)
+MUX_CFG_24XX("H19_24XX_I2C2_SDA",	0x114,	0,	0,	0,	1)
+
+/* Menelaus interrupt */
+MUX_CFG_24XX("W19_24XX_SYS_NIRQ",	0x12c,	0,	1,	1,	1)
+
+/* 24xx GPIO */
+MUX_CFG_24XX("Y20_24XX_GPIO60",		0x12c,	3,	0,	0,	1)
+MUX_CFG_24XX("M15_24XX_GPIO92",		0x10a,	3,	0,	0,	1)
+
+};
+
+int __init omap2_mux_init(void)
+{
+	omap_mux_register(omap24xx_pins, ARRAY_SIZE(omap24xx_pins));
+	return 0;
+}
+
+#endif
diff --git a/arch/arm/mach-omap2/prcm.h b/arch/arm/mach-omap2/prcm.h
new file mode 100644
index 000000000000..2eb89b936c83
--- /dev/null
+++ b/arch/arm/mach-omap2/prcm.h
@@ -0,0 +1,419 @@
+/*
+ * prcm.h - Access definations for use in OMAP24XX clock and power management
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARM_ARCH_DPM_PRCM_H
+#define __ASM_ARM_ARCH_DPM_PRCM_H
+
+/* SET_PERFORMANCE_LEVEL PARAMETERS */
+#define PRCM_HALF_SPEED 1
+#define PRCM_FULL_SPEED 2
+
+#ifndef __ASSEMBLER__
+
+#define PRCM_REG32(offset)	__REG32(OMAP24XX_PRCM_BASE + (offset))
+
+#define PRCM_REVISION		PRCM_REG32(0x000)
+#define PRCM_SYSCONFIG		PRCM_REG32(0x010)
+#define PRCM_IRQSTATUS_MPU	PRCM_REG32(0x018)
+#define PRCM_IRQENABLE_MPU	PRCM_REG32(0x01C)
+#define PRCM_VOLTCTRL		PRCM_REG32(0x050)
+#define PRCM_VOLTST		PRCM_REG32(0x054)
+#define PRCM_CLKSRC_CTRL	PRCM_REG32(0x060)
+#define PRCM_CLKOUT_CTRL	PRCM_REG32(0x070)
+#define PRCM_CLKEMUL_CTRL	PRCM_REG32(0x078)
+#define PRCM_CLKCFG_CTRL	PRCM_REG32(0x080)
+#define PRCM_CLKCFG_STATUS	PRCM_REG32(0x084)
+#define PRCM_VOLTSETUP		PRCM_REG32(0x090)
+#define PRCM_CLKSSETUP		PRCM_REG32(0x094)
+#define PRCM_POLCTRL		PRCM_REG32(0x098)
+
+/* GENERAL PURPOSE */
+#define GENERAL_PURPOSE1	PRCM_REG32(0x0B0)
+#define GENERAL_PURPOSE2	PRCM_REG32(0x0B4)
+#define GENERAL_PURPOSE3	PRCM_REG32(0x0B8)
+#define GENERAL_PURPOSE4	PRCM_REG32(0x0BC)
+#define GENERAL_PURPOSE5	PRCM_REG32(0x0C0)
+#define GENERAL_PURPOSE6	PRCM_REG32(0x0C4)
+#define GENERAL_PURPOSE7	PRCM_REG32(0x0C8)
+#define GENERAL_PURPOSE8	PRCM_REG32(0x0CC)
+#define GENERAL_PURPOSE9	PRCM_REG32(0x0D0)
+#define GENERAL_PURPOSE10	PRCM_REG32(0x0D4)
+#define GENERAL_PURPOSE11	PRCM_REG32(0x0D8)
+#define GENERAL_PURPOSE12	PRCM_REG32(0x0DC)
+#define GENERAL_PURPOSE13	PRCM_REG32(0x0E0)
+#define GENERAL_PURPOSE14	PRCM_REG32(0x0E4)
+#define GENERAL_PURPOSE15	PRCM_REG32(0x0E8)
+#define GENERAL_PURPOSE16	PRCM_REG32(0x0EC)
+#define GENERAL_PURPOSE17	PRCM_REG32(0x0F0)
+#define GENERAL_PURPOSE18	PRCM_REG32(0x0F4)
+#define GENERAL_PURPOSE19	PRCM_REG32(0x0F8)
+#define GENERAL_PURPOSE20	PRCM_REG32(0x0FC)
+
+/* MPU */
+#define CM_CLKSEL_MPU		PRCM_REG32(0x140)
+#define CM_CLKSTCTRL_MPU	PRCM_REG32(0x148)
+#define RM_RSTST_MPU		PRCM_REG32(0x158)
+#define PM_WKDEP_MPU		PRCM_REG32(0x1C8)
+#define PM_EVGENCTRL_MPU	PRCM_REG32(0x1D4)
+#define PM_EVEGENONTIM_MPU	PRCM_REG32(0x1D8)
+#define PM_EVEGENOFFTIM_MPU	PRCM_REG32(0x1DC)
+#define PM_PWSTCTRL_MPU		PRCM_REG32(0x1E0)
+#define PM_PWSTST_MPU		PRCM_REG32(0x1E4)
+
+/* CORE */
+#define CM_FCLKEN1_CORE		PRCM_REG32(0x200)
+#define CM_FCLKEN2_CORE		PRCM_REG32(0x204)
+#define CM_FCLKEN3_CORE		PRCM_REG32(0x208)
+#define CM_ICLKEN1_CORE		PRCM_REG32(0x210)
+#define CM_ICLKEN2_CORE		PRCM_REG32(0x214)
+#define CM_ICLKEN3_CORE		PRCM_REG32(0x218)
+#define CM_ICLKEN4_CORE		PRCM_REG32(0x21C)
+#define CM_IDLEST1_CORE		PRCM_REG32(0x220)
+#define CM_IDLEST2_CORE		PRCM_REG32(0x224)
+#define CM_IDLEST3_CORE		PRCM_REG32(0x228)
+#define CM_IDLEST4_CORE		PRCM_REG32(0x22C)
+#define CM_AUTOIDLE1_CORE	PRCM_REG32(0x230)
+#define CM_AUTOIDLE2_CORE	PRCM_REG32(0x234)
+#define CM_AUTOIDLE3_CORE	PRCM_REG32(0x238)
+#define CM_AUTOIDLE4_CORE	PRCM_REG32(0x23C)
+#define CM_CLKSEL1_CORE		PRCM_REG32(0x240)
+#define CM_CLKSEL2_CORE		PRCM_REG32(0x244)
+#define CM_CLKSTCTRL_CORE	PRCM_REG32(0x248)
+#define PM_WKEN1_CORE		PRCM_REG32(0x2A0)
+#define PM_WKEN2_CORE		PRCM_REG32(0x2A4)
+#define PM_WKST1_CORE		PRCM_REG32(0x2B0)
+#define PM_WKST2_CORE		PRCM_REG32(0x2B4)
+#define PM_WKDEP_CORE		PRCM_REG32(0x2C8)
+#define PM_PWSTCTRL_CORE	PRCM_REG32(0x2E0)
+#define PM_PWSTST_CORE		PRCM_REG32(0x2E4)
+
+/* GFX */
+#define CM_FCLKEN_GFX		PRCM_REG32(0x300)
+#define CM_ICLKEN_GFX		PRCM_REG32(0x310)
+#define CM_IDLEST_GFX		PRCM_REG32(0x320)
+#define CM_CLKSEL_GFX		PRCM_REG32(0x340)
+#define CM_CLKSTCTRL_GFX	PRCM_REG32(0x348)
+#define RM_RSTCTRL_GFX		PRCM_REG32(0x350)
+#define RM_RSTST_GFX		PRCM_REG32(0x358)
+#define PM_WKDEP_GFX		PRCM_REG32(0x3C8)
+#define PM_PWSTCTRL_GFX		PRCM_REG32(0x3E0)
+#define PM_PWSTST_GFX		PRCM_REG32(0x3E4)
+
+/* WAKE-UP */
+#define CM_FCLKEN_WKUP		PRCM_REG32(0x400)
+#define CM_ICLKEN_WKUP		PRCM_REG32(0x410)
+#define CM_IDLEST_WKUP		PRCM_REG32(0x420)
+#define CM_AUTOIDLE_WKUP	PRCM_REG32(0x430)
+#define CM_CLKSEL_WKUP		PRCM_REG32(0x440)
+#define RM_RSTCTRL_WKUP		PRCM_REG32(0x450)
+#define RM_RSTTIME_WKUP		PRCM_REG32(0x454)
+#define RM_RSTST_WKUP		PRCM_REG32(0x458)
+#define PM_WKEN_WKUP		PRCM_REG32(0x4A0)
+#define PM_WKST_WKUP		PRCM_REG32(0x4B0)
+
+/* CLOCKS */
+#define CM_CLKEN_PLL		PRCM_REG32(0x500)
+#define CM_IDLEST_CKGEN		PRCM_REG32(0x520)
+#define CM_AUTOIDLE_PLL		PRCM_REG32(0x530)
+#define CM_CLKSEL1_PLL		PRCM_REG32(0x540)
+#define CM_CLKSEL2_PLL		PRCM_REG32(0x544)
+
+/* DSP */
+#define CM_FCLKEN_DSP		PRCM_REG32(0x800)
+#define CM_ICLKEN_DSP		PRCM_REG32(0x810)
+#define CM_IDLEST_DSP		PRCM_REG32(0x820)
+#define CM_AUTOIDLE_DSP		PRCM_REG32(0x830)
+#define CM_CLKSEL_DSP		PRCM_REG32(0x840)
+#define CM_CLKSTCTRL_DSP	PRCM_REG32(0x848)
+#define RM_RSTCTRL_DSP		PRCM_REG32(0x850)
+#define RM_RSTST_DSP		PRCM_REG32(0x858)
+#define PM_WKEN_DSP		PRCM_REG32(0x8A0)
+#define PM_WKDEP_DSP		PRCM_REG32(0x8C8)
+#define PM_PWSTCTRL_DSP		PRCM_REG32(0x8E0)
+#define PM_PWSTST_DSP		PRCM_REG32(0x8E4)
+#define PRCM_IRQSTATUS_DSP	PRCM_REG32(0x8F0)
+#define PRCM_IRQENABLE_DSP	PRCM_REG32(0x8F4)
+
+/* IVA */
+#define PRCM_IRQSTATUS_IVA	PRCM_REG32(0x8F8)
+#define PRCM_IRQENABLE_IVA	PRCM_REG32(0x8FC)
+
+/* Modem on 2430 */
+#define CM_FCLKEN_MDM		PRCM_REG32(0xC00)
+#define CM_ICLKEN_MDM		PRCM_REG32(0xC10)
+#define CM_IDLEST_MDM		PRCM_REG32(0xC20)
+#define CM_CLKSEL_MDM		PRCM_REG32(0xC40)
+
+/* FIXME: Move to header for 2430 */
+#define DISP_BASE		(OMAP24XX_L4_IO_BASE+0x50000)
+#define DISP_REG32(offset)	__REG32(DISP_BASE + (offset))
+
+#define GPMC_BASE		(OMAP24XX_GPMC_BASE)
+#define GPMC_REG32(offset)	__REG32(GPMC_BASE + (offset))
+
+#define GPT1_BASE		(OMAP24XX_GPT1)
+#define GPT1_REG32(offset)	__REG32(GPT1_BASE + (offset))
+
+/* Misc sysconfig */
+#define DISPC_SYSCONFIG		DISP_REG32(0x410)
+#define SPI_BASE		(OMAP24XX_L4_IO_BASE+0x98000)
+#define MCSPI1_SYSCONFIG	__REG32(SPI_BASE + 0x10)
+#define MCSPI2_SYSCONFIG	__REG32(SPI_BASE+0x2000 + 0x10)
+
+//#define DSP_MMU_SYSCONFIG	0x5A000010
+#define CAMERA_MMU_SYSCONFIG	__REG32(DISP_BASE+0x2C10)
+//#define IVA_MMU_SYSCONFIG	0x5D000010
+//#define DSP_DMA_SYSCONFIG	0x00FCC02C
+#define CAMERA_DMA_SYSCONFIG	__REG32(DISP_BASE+0x282C)
+#define SYSTEM_DMA_SYSCONFIG	__REG32(DISP_BASE+0x602C)
+#define GPMC_SYSCONFIG		GPMC_REG32(0x010)
+#define MAILBOXES_SYSCONFIG	__REG32(OMAP24XX_L4_IO_BASE+0x94010)
+#define UART1_SYSCONFIG		__REG32(OMAP24XX_L4_IO_BASE+0x6A054)
+#define UART2_SYSCONFIG		__REG32(OMAP24XX_L4_IO_BASE+0x6C054)
+#define UART3_SYSCONFIG		__REG32(OMAP24XX_L4_IO_BASE+0x6E054)
+//#define IVA_SYSCONFIG		0x5C060010
+#define SDRC_SYSCONFIG		__REG32(OMAP24XX_SDRC_BASE+0x10)
+#define SMS_SYSCONFIG		__REG32(OMAP24XX_SMS_BASE+0x10)
+#define SSI_SYSCONFIG		__REG32(DISP_BASE+0x8010)
+//#define VLYNQ_SYSCONFIG	0x67FFFE10
+
+/* rkw - good cannidates for PM_ to start what nm was trying */
+#define OMAP24XX_GPT2		(OMAP24XX_L4_IO_BASE+0x2A000)
+#define OMAP24XX_GPT3		(OMAP24XX_L4_IO_BASE+0x78000)
+#define OMAP24XX_GPT4		(OMAP24XX_L4_IO_BASE+0x7A000)
+#define OMAP24XX_GPT5		(OMAP24XX_L4_IO_BASE+0x7C000)
+#define OMAP24XX_GPT6		(OMAP24XX_L4_IO_BASE+0x7E000)
+#define OMAP24XX_GPT7		(OMAP24XX_L4_IO_BASE+0x80000)
+#define OMAP24XX_GPT8		(OMAP24XX_L4_IO_BASE+0x82000)
+#define OMAP24XX_GPT9		(OMAP24XX_L4_IO_BASE+0x84000)
+#define OMAP24XX_GPT10		(OMAP24XX_L4_IO_BASE+0x86000)
+#define OMAP24XX_GPT11		(OMAP24XX_L4_IO_BASE+0x88000)
+#define OMAP24XX_GPT12		(OMAP24XX_L4_IO_BASE+0x8A000)
+
+#define GPTIMER1_SYSCONFIG	GPT1_REG32(0x010)
+#define GPTIMER2_SYSCONFIG	__REG32(OMAP24XX_GPT2 + 0x10)
+#define GPTIMER3_SYSCONFIG	__REG32(OMAP24XX_GPT3 + 0x10)
+#define GPTIMER4_SYSCONFIG	__REG32(OMAP24XX_GPT4 + 0x10)
+#define GPTIMER5_SYSCONFIG	__REG32(OMAP24XX_GPT5 + 0x10)
+#define GPTIMER6_SYSCONFIG	__REG32(OMAP24XX_GPT6 + 0x10)
+#define GPTIMER7_SYSCONFIG	__REG32(OMAP24XX_GPT7 + 0x10)
+#define GPTIMER8_SYSCONFIG	__REG32(OMAP24XX_GPT8 + 0x10)
+#define GPTIMER9_SYSCONFIG	__REG32(OMAP24XX_GPT9 + 0x10)
+#define GPTIMER10_SYSCONFIG	__REG32(OMAP24XX_GPT10 + 0x10)
+#define GPTIMER11_SYSCONFIG	__REG32(OMAP24XX_GPT11 + 0x10)
+#define GPTIMER12_SYSCONFIG	__REG32(OMAP24XX_GPT12 + 0x10)
+
+#define GPIOX_BASE(X)		(OMAP24XX_GPIO_BASE+(0x2000*((X)-1)))
+
+#define GPIO1_SYSCONFIG		__REG32((GPIOX_BASE(1)+0x10))
+#define GPIO2_SYSCONFIG		__REG32((GPIOX_BASE(2)+0x10))
+#define GPIO3_SYSCONFIG		__REG32((GPIOX_BASE(3)+0x10))
+#define GPIO4_SYSCONFIG		__REG32((GPIOX_BASE(4)+0x10))
+
+/* GP TIMER 1 */
+#define GPTIMER1_TISTAT		GPT1_REG32(0x014)
+#define GPTIMER1_TISR		GPT1_REG32(0x018)
+#define GPTIMER1_TIER		GPT1_REG32(0x01C)
+#define GPTIMER1_TWER		GPT1_REG32(0x020)
+#define GPTIMER1_TCLR		GPT1_REG32(0x024)
+#define GPTIMER1_TCRR		GPT1_REG32(0x028)
+#define GPTIMER1_TLDR		GPT1_REG32(0x02C)
+#define GPTIMER1_TTGR		GPT1_REG32(0x030)
+#define GPTIMER1_TWPS		GPT1_REG32(0x034)
+#define GPTIMER1_TMAR		GPT1_REG32(0x038)
+#define GPTIMER1_TCAR1		GPT1_REG32(0x03C)
+#define GPTIMER1_TSICR		GPT1_REG32(0x040)
+#define GPTIMER1_TCAR2		GPT1_REG32(0x044)
+
+/* rkw -- base fix up please... */
+#define GPTIMER3_TISR		__REG32(OMAP24XX_L4_IO_BASE+0x78018)
+
+/* SDRC */
+#define SDRC_DLLA_CTRL		__REG32(OMAP24XX_SDRC_BASE+0x060)
+#define SDRC_DLLA_STATUS	__REG32(OMAP24XX_SDRC_BASE+0x064)
+#define SDRC_DLLB_CTRL		__REG32(OMAP24XX_SDRC_BASE+0x068)
+#define SDRC_DLLB_STATUS	__REG32(OMAP24XX_SDRC_BASE+0x06C)
+#define SDRC_POWER		__REG32(OMAP24XX_SDRC_BASE+0x070)
+#define SDRC_MR_0		__REG32(OMAP24XX_SDRC_BASE+0x084)
+
+/* GPIO 1 */
+#define GPIO1_BASE		GPIOX_BASE(1)
+#define GPIO1_REG32(offset)	__REG32(GPIO1_BASE + (offset))
+#define GPIO1_IRQENABLE1	GPIO1_REG32(0x01C)
+#define GPIO1_IRQSTATUS1	GPIO1_REG32(0x018)
+#define GPIO1_IRQENABLE2	GPIO1_REG32(0x02C)
+#define GPIO1_IRQSTATUS2	GPIO1_REG32(0x028)
+#define GPIO1_WAKEUPENABLE	GPIO1_REG32(0x020)
+#define GPIO1_RISINGDETECT	GPIO1_REG32(0x048)
+#define GPIO1_DATAIN		GPIO1_REG32(0x038)
+#define GPIO1_OE		GPIO1_REG32(0x034)
+#define GPIO1_DATAOUT		GPIO1_REG32(0x03C)
+
+/* GPIO2 */
+#define GPIO2_BASE		GPIOX_BASE(2)
+#define GPIO2_REG32(offset)	__REG32(GPIO2_BASE + (offset))
+#define GPIO2_IRQENABLE1	GPIO2_REG32(0x01C)
+#define GPIO2_IRQSTATUS1	GPIO2_REG32(0x018)
+#define GPIO2_IRQENABLE2	GPIO2_REG32(0x02C)
+#define GPIO2_IRQSTATUS2	GPIO2_REG32(0x028)
+#define GPIO2_WAKEUPENABLE	GPIO2_REG32(0x020)
+#define GPIO2_RISINGDETECT	GPIO2_REG32(0x048)
+#define GPIO2_DATAIN		GPIO2_REG32(0x038)
+#define GPIO2_OE		GPIO2_REG32(0x034)
+#define GPIO2_DATAOUT		GPIO2_REG32(0x03C)
+
+/* GPIO 3 */
+#define GPIO3_BASE		GPIOX_BASE(3)
+#define GPIO3_REG32(offset)	__REG32(GPIO3_BASE + (offset))
+#define GPIO3_IRQENABLE1	GPIO3_REG32(0x01C)
+#define GPIO3_IRQSTATUS1	GPIO3_REG32(0x018)
+#define GPIO3_IRQENABLE2	GPIO3_REG32(0x02C)
+#define GPIO3_IRQSTATUS2	GPIO3_REG32(0x028)
+#define GPIO3_WAKEUPENABLE	GPIO3_REG32(0x020)
+#define GPIO3_RISINGDETECT	GPIO3_REG32(0x048)
+#define GPIO3_FALLINGDETECT	GPIO3_REG32(0x04C)
+#define GPIO3_DATAIN		GPIO3_REG32(0x038)
+#define GPIO3_OE		GPIO3_REG32(0x034)
+#define GPIO3_DATAOUT		GPIO3_REG32(0x03C)
+#define GPIO3_DEBOUNCENABLE	GPIO3_REG32(0x050)
+#define GPIO3_DEBOUNCINGTIME	GPIO3_REG32(0x054)
+
+/* GPIO 4 */
+#define GPIO4_BASE		GPIOX_BASE(4)
+#define GPIO4_REG32(offset)	__REG32(GPIO4_BASE + (offset))
+#define GPIO4_IRQENABLE1	GPIO4_REG32(0x01C)
+#define GPIO4_IRQSTATUS1	GPIO4_REG32(0x018)
+#define GPIO4_IRQENABLE2	GPIO4_REG32(0x02C)
+#define GPIO4_IRQSTATUS2	GPIO4_REG32(0x028)
+#define GPIO4_WAKEUPENABLE	GPIO4_REG32(0x020)
+#define GPIO4_RISINGDETECT	GPIO4_REG32(0x048)
+#define GPIO4_FALLINGDETECT	GPIO4_REG32(0x04C)
+#define GPIO4_DATAIN		GPIO4_REG32(0x038)
+#define GPIO4_OE		GPIO4_REG32(0x034)
+#define GPIO4_DATAOUT		GPIO4_REG32(0x03C)
+#define GPIO4_DEBOUNCENABLE	GPIO4_REG32(0x050)
+#define GPIO4_DEBOUNCINGTIME	GPIO4_REG32(0x054)
+
+
+/* IO CONFIG */
+#define CONTROL_BASE		(OMAP24XX_CTRL_BASE)
+#define CONTROL_REG32(offset)	__REG32(CONTROL_BASE + (offset))
+
+#define CONTROL_PADCONF_SPI1_NCS2	CONTROL_REG32(0x104)
+#define CONTROL_PADCONF_SYS_XTALOUT	CONTROL_REG32(0x134)
+#define CONTROL_PADCONF_UART1_RX	CONTROL_REG32(0x0C8)
+#define CONTROL_PADCONF_MCBSP1_DX	CONTROL_REG32(0x10C)
+#define CONTROL_PADCONF_GPMC_NCS4	CONTROL_REG32(0x090)
+#define CONTROL_PADCONF_DSS_D5		CONTROL_REG32(0x0B8)
+#define CONTROL_PADCONF_DSS_D9		CONTROL_REG32(0x0BC)
+#define CONTROL_PADCONF_DSS_D13		CONTROL_REG32(0x0C0)
+#define CONTROL_PADCONF_DSS_VSYNC	CONTROL_REG32(0x0CC)
+
+/* CONTROL */
+#define CONTROL_DEVCONF		CONTROL_REG32(0x274)
+
+/* INTERRUPT CONTROLLER */
+#define INTC_BASE		(OMAP24XX_L4_IO_BASE+0xfe000)
+#define INTC_REG32(offset)	__REG32(INTC_BASE + (offset))
+
+#define INTC1_U_BASE		INTC_REG32(0x000)
+#define INTC_MIR0		INTC_REG32(0x084)
+#define INTC_MIR_SET0		INTC_REG32(0x08C)
+#define INTC_MIR_CLEAR0		INTC_REG32(0x088)
+#define INTC_ISR_CLEAR0		INTC_REG32(0x094)
+#define INTC_MIR1		INTC_REG32(0x0A4)
+#define INTC_MIR_SET1		INTC_REG32(0x0AC)
+#define INTC_MIR_CLEAR1		INTC_REG32(0x0A8)
+#define INTC_ISR_CLEAR1		INTC_REG32(0x0B4)
+#define INTC_MIR2		INTC_REG32(0x0C4)
+#define INTC_MIR_SET2		INTC_REG32(0x0CC)
+#define INTC_MIR_CLEAR2		INTC_REG32(0x0C8)
+#define INTC_ISR_CLEAR2		INTC_REG32(0x0D4)
+#define INTC_SIR_IRQ		INTC_REG32(0x040)
+#define INTC_CONTROL		INTC_REG32(0x048)
+#define INTC_ILR11		INTC_REG32(0x12C)
+#define INTC_ILR32		INTC_REG32(0x180)
+#define INTC_ILR37		INTC_REG32(0x194)
+#define INTC_SYSCONFIG		INTC_REG32(0x010)
+
+/* RAM FIREWALL */
+#define RAMFW_BASE		(0x68005000)
+#define RAMFW_REG32(offset)	__REG32(RAMFW_BASE + (offset))
+
+#define RAMFW_REQINFOPERM0	RAMFW_REG32(0x048)
+#define RAMFW_READPERM0		RAMFW_REG32(0x050)
+#define RAMFW_WRITEPERM0	RAMFW_REG32(0x058)
+
+/* GPMC CS1 FPGA ON USER INTERFACE MODULE */
+//#define DEBUG_BOARD_LED_REGISTER 0x04000014
+
+/* GPMC CS0 */
+#define GPMC_CONFIG1_0		GPMC_REG32(0x060)
+#define GPMC_CONFIG2_0		GPMC_REG32(0x064)
+#define GPMC_CONFIG3_0		GPMC_REG32(0x068)
+#define GPMC_CONFIG4_0		GPMC_REG32(0x06C)
+#define GPMC_CONFIG5_0		GPMC_REG32(0x070)
+#define GPMC_CONFIG6_0		GPMC_REG32(0x074)
+#define GPMC_CONFIG7_0		GPMC_REG32(0x078)
+
+/* DSS */
+#define DSS_CONTROL		DISP_REG32(0x040)
+#define DISPC_CONTROL		DISP_REG32(0x440)
+#define DISPC_SYSSTATUS		DISP_REG32(0x414)
+#define DISPC_IRQSTATUS		DISP_REG32(0x418)
+#define DISPC_IRQENABLE		DISP_REG32(0x41C)
+#define DISPC_CONFIG		DISP_REG32(0x444)
+#define DISPC_DEFAULT_COLOR0	DISP_REG32(0x44C)
+#define DISPC_DEFAULT_COLOR1	DISP_REG32(0x450)
+#define DISPC_TRANS_COLOR0	DISP_REG32(0x454)
+#define DISPC_TRANS_COLOR1	DISP_REG32(0x458)
+#define DISPC_LINE_NUMBER	DISP_REG32(0x460)
+#define DISPC_TIMING_H		DISP_REG32(0x464)
+#define DISPC_TIMING_V		DISP_REG32(0x468)
+#define DISPC_POL_FREQ		DISP_REG32(0x46C)
+#define DISPC_DIVISOR		DISP_REG32(0x470)
+#define DISPC_SIZE_DIG		DISP_REG32(0x478)
+#define DISPC_SIZE_LCD		DISP_REG32(0x47C)
+#define DISPC_GFX_BA0		DISP_REG32(0x480)
+#define DISPC_GFX_BA1		DISP_REG32(0x484)
+#define DISPC_GFX_POSITION	DISP_REG32(0x488)
+#define DISPC_GFX_SIZE		DISP_REG32(0x48C)
+#define DISPC_GFX_ATTRIBUTES	DISP_REG32(0x4A0)
+#define DISPC_GFX_FIFO_THRESHOLD	DISP_REG32(0x4A4)
+#define DISPC_GFX_ROW_INC	DISP_REG32(0x4AC)
+#define DISPC_GFX_PIXEL_INC	DISP_REG32(0x4B0)
+#define DISPC_GFX_WINDOW_SKIP	DISP_REG32(0x4B4)
+#define DISPC_GFX_TABLE_BA	DISP_REG32(0x4B8)
+#define DISPC_DATA_CYCLE1	DISP_REG32(0x5D4)
+#define DISPC_DATA_CYCLE2	DISP_REG32(0x5D8)
+#define DISPC_DATA_CYCLE3	DISP_REG32(0x5DC)
+
+/* Wake up define for board */
+#define GPIO97			(1 << 1)
+#define GPIO88			(1 << 24)
+
+#endif /* __ASSEMBLER__ */
+
+#endif
+
+
+
+
+
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
new file mode 100644
index 000000000000..f4df04fe1dd8
--- /dev/null
+++ b/arch/arm/mach-omap2/serial.c
@@ -0,0 +1,180 @@
+/*
+ * arch/arm/mach-omap/omap2/serial.c
+ *
+ * OMAP2 serial support.
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Paul Mundt <paul.mundt@nokia.com>
+ *
+ * Based off of arch/arm/mach-omap/omap1/serial.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
+
+#include <asm/io.h>
+#include <asm/hardware/clock.h>
+
+#include <asm/arch/common.h>
+#include <asm/arch/board.h>
+
+static struct clk * uart1_ick = NULL;
+static struct clk * uart1_fck = NULL;
+static struct clk * uart2_ick = NULL;
+static struct clk * uart2_fck = NULL;
+static struct clk * uart3_ick = NULL;
+static struct clk * uart3_fck = NULL;
+
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.membase	= (char *)IO_ADDRESS(OMAP_UART1_BASE),
+		.mapbase	= (unsigned long)OMAP_UART1_BASE,
+		.irq		= 72,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= OMAP16XX_BASE_BAUD * 16,
+	}, {
+		.membase	= (char *)IO_ADDRESS(OMAP_UART2_BASE),
+		.mapbase	= (unsigned long)OMAP_UART2_BASE,
+		.irq		= 73,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= OMAP16XX_BASE_BAUD * 16,
+	}, {
+		.membase	= (char *)IO_ADDRESS(OMAP_UART3_BASE),
+		.mapbase	= (unsigned long)OMAP_UART3_BASE,
+		.irq		= 74,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= OMAP16XX_BASE_BAUD * 16,
+	}, {
+		.flags		= 0
+	}
+};
+
+static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
+					   int offset)
+{
+	offset <<= up->regshift;
+	return (unsigned int)__raw_readb(up->membase + offset);
+}
+
+static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
+				    int value)
+{
+	offset <<= p->regshift;
+	__raw_writeb(value, (unsigned long)(p->membase + offset));
+}
+
+/*
+ * Internal UARTs need to be initialized for the 8250 autoconfig to work
+ * properly. Note that the TX watermark initialization may not be needed
+ * once the 8250.c watermark handling code is merged.
+ */
+static inline void __init omap_serial_reset(struct plat_serial8250_port *p)
+{
+	serial_write_reg(p, UART_OMAP_MDR1, 0x07);
+	serial_write_reg(p, UART_OMAP_SCR, 0x08);
+	serial_write_reg(p, UART_OMAP_MDR1, 0x00);
+	serial_write_reg(p, UART_OMAP_SYSC, 0x01);
+}
+
+void __init omap_serial_init()
+{
+	int i;
+	const struct omap_uart_config *info;
+
+	/*
+	 * Make sure the serial ports are muxed on at this point.
+	 * You have to mux them off in device drivers later on
+	 * if not needed.
+	 */
+
+	info = omap_get_config(OMAP_TAG_UART,
+			       struct omap_uart_config);
+
+	if (info == NULL)
+		return;
+
+	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
+		struct plat_serial8250_port *p = serial_platform_data + i;
+
+		if (!(info->enabled_uarts & (1 << i))) {
+			p->membase = 0;
+			p->mapbase = 0;
+			continue;
+		}
+
+		switch (i) {
+		case 0:
+			uart1_ick = clk_get(NULL, "uart1_ick");
+			if (IS_ERR(uart1_ick))
+				printk("Could not get uart1_ick\n");
+			else {
+				clk_use(uart1_ick);
+			}
+
+			uart1_fck = clk_get(NULL, "uart1_fck");
+			if (IS_ERR(uart1_fck))
+				printk("Could not get uart1_fck\n");
+			else {
+				clk_use(uart1_fck);
+			}
+			break;
+		case 1:
+			uart2_ick = clk_get(NULL, "uart2_ick");
+			if (IS_ERR(uart2_ick))
+				printk("Could not get uart2_ick\n");
+			else {
+				clk_use(uart2_ick);
+			}
+
+			uart2_fck = clk_get(NULL, "uart2_fck");
+			if (IS_ERR(uart2_fck))
+				printk("Could not get uart2_fck\n");
+			else {
+				clk_use(uart2_fck);
+			}
+			break;
+		case 2:
+			uart3_ick = clk_get(NULL, "uart3_ick");
+			if (IS_ERR(uart3_ick))
+				printk("Could not get uart3_ick\n");
+			else {
+				clk_use(uart3_ick);
+			}
+
+			uart3_fck = clk_get(NULL, "uart3_fck");
+			if (IS_ERR(uart3_fck))
+				printk("Could not get uart3_fck\n");
+			else {
+				clk_use(uart3_fck);
+			}
+			break;
+		}
+
+		omap_serial_reset(p);
+	}
+}
+
+static struct platform_device serial_device = {
+	.name			= "serial8250",
+	.id			= 0,
+	.dev			= {
+		.platform_data	= serial_platform_data,
+	},
+};
+
+static int __init omap_init(void)
+{
+	return platform_device_register(&serial_device);
+}
+arch_initcall(omap_init);
diff --git a/arch/arm/mach-omap2/sram-fn.S b/arch/arm/mach-omap2/sram-fn.S
new file mode 100644
index 000000000000..2a869e203342
--- /dev/null
+++ b/arch/arm/mach-omap2/sram-fn.S
@@ -0,0 +1,333 @@
+/*
+ * linux/arch/arm/mach-omap1/sram.S
+ *
+ * Omap2 specific functions that need to be run in internal SRAM
+ *
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/arch/io.h>
+#include <asm/hardware.h>
+
+#include <asm/arch/prcm.h>
+
+#define TIMER_32KSYNCT_CR_V	IO_ADDRESS(OMAP24XX_32KSYNCT_BASE + 0x010)
+
+#define CM_CLKSEL2_PLL_V	IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x544)
+#define PRCM_VOLTCTRL_V		IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x050)
+#define PRCM_CLKCFG_CTRL_V	IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x080)
+#define CM_CLKEN_PLL_V		IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x500)
+#define CM_IDLEST_CKGEN_V	IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x520)
+#define CM_CLKSEL1_PLL_V	IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x540)
+
+#define SDRC_DLLA_CTRL_V	IO_ADDRESS(OMAP24XX_SDRC_BASE + 0x060)
+#define SDRC_RFR_CTRL_V		IO_ADDRESS(OMAP24XX_SDRC_BASE + 0x0a4)
+
+	.text
+
+ENTRY(sram_ddr_init)
+	stmfd	sp!, {r0 - r12, lr}	@ save registers on stack
+
+	mov	r12, r2			@ capture CS1 vs CS0
+	mov	r8, r3			@ capture force parameter
+
+	/* frequency shift down */
+	ldr	r2, cm_clksel2_pll	@ get address of dpllout reg
+	mov	r3, #0x1		@ value for 1x operation
+	str	r3, [r2]		@ go to L1-freq operation
+
+	/* voltage shift down */
+	mov r9, #0x1			@ set up for L1 voltage call
+	bl voltage_shift		@ go drop voltage
+
+	/* dll lock mode */
+	ldr	r11, sdrc_dlla_ctrl	@ addr of dlla ctrl
+	ldr	r10, [r11]		@ get current val
+	cmp	r12, #0x1		@ cs1 base (2422 es2.05/1)
+	addeq	r11, r11, #0x8		@ if cs1 base, move to DLLB
+	mvn	r9, #0x4		@ mask to get clear bit2
+	and	r10, r10, r9		@ clear bit2 for lock mode.
+	orr	r10, r10, #0x8		@ make sure DLL on (es2 bit pos)
+	orr	r10, r10, #0x2		@ 90 degree phase for all below 133Mhz
+	str	r10, [r11]		@ commit to DLLA_CTRL
+	bl	i_dll_wait		@ wait for dll to lock
+
+	/* get dll value */
+	add	r11, r11, #0x4		@ get addr of status reg
+	ldr	r10, [r11]		@ get locked value
+
+	/* voltage shift up */
+	mov r9, #0x0			@ shift back to L0-voltage
+	bl voltage_shift		@ go raise voltage
+
+	/* frequency shift up */
+	mov	r3, #0x2		@ value for 2x operation
+	str	r3, [r2]		@ go to L0-freq operation
+
+	/* reset entry mode for dllctrl */
+	sub	r11, r11, #0x4		@ move from status to ctrl
+	cmp	r12, #0x1		@ normalize if cs1 based
+	subeq	r11, r11, #0x8		@ possibly back to DLLA
+	cmp	r8, #0x1		@ if forced unlock exit
+	orreq	r1, r1, #0x4		@ make sure exit with unlocked value
+	str	r1, [r11]		@ restore DLLA_CTRL high value
+	add	r11, r11, #0x8		@ move to DLLB_CTRL addr
+	str	r1, [r11]		@ set value DLLB_CTRL
+	bl	i_dll_wait		@ wait for possible lock
+
+	/* set up for return, DDR should be good */
+	str r10, [r0]			@ write dll_status and return counter
+	ldmfd	sp!, {r0 - r12, pc}	@ restore regs and return
+
+	/* ensure the DLL has relocked */
+i_dll_wait:
+	mov	r4, #0x800		@ delay DLL relock, min 0x400 L3 clocks
+i_dll_delay:
+	subs	r4, r4, #0x1
+	bne	i_dll_delay
+	mov	pc, lr
+
+	/*
+	 * shift up or down voltage, use R9 as input to tell level.
+	 * wait for it to finish, use 32k sync counter, 1tick=31uS.
+	 */
+voltage_shift:
+	ldr	r4, prcm_voltctrl	@ get addr of volt ctrl.
+	ldr	r5, [r4]		@ get value.
+	ldr	r6, prcm_mask_val	@ get value of mask
+	and	r5, r5, r6		@ apply mask to clear bits
+	orr	r5, r5, r9		@ bulld value for L0/L1-volt operation.
+	str	r5, [r4]		@ set up for change.
+	mov	r3, #0x4000		@ get val for force
+	orr	r5, r5, r3		@ build value for force
+	str	r5, [r4]		@ Force transition to L1
+
+	ldr	r3, timer_32ksynct_cr	@ get addr of counter
+	ldr	r5, [r3]		@ get value
+	add	r5, r5, #0x3		@ give it at most 93uS
+volt_delay:
+	ldr	r7, [r3]		@ get timer value
+	cmp	r5, r7			@ time up?
+	bhi	volt_delay		@ not yet->branch
+	mov	pc, lr			@ back to caller.
+
+/* relative load constants */
+cm_clksel2_pll:
+	.word CM_CLKSEL2_PLL_V
+sdrc_dlla_ctrl:
+	.word SDRC_DLLA_CTRL_V
+prcm_voltctrl:
+	.word PRCM_VOLTCTRL_V
+prcm_mask_val:
+	.word 0xFFFF3FFC
+timer_32ksynct_cr:
+	.word TIMER_32KSYNCT_CR_V
+ENTRY(sram_ddr_init_sz)
+	.word	. - sram_ddr_init
+
+/*
+ * Reprograms memory timings.
+ * r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR]
+ * PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0
+ */
+ENTRY(sram_reprogram_sdrc)
+	stmfd	sp!, {r0 - r10, lr}	@ save registers on stack
+	mov	r3, #0x0		@ clear for mrc call
+	mcr	p15, 0, r3, c7, c10, 4	@ memory barrier, finish ARM SDR/DDR
+	nop
+	nop
+	ldr	r6, ddr_sdrc_rfr_ctrl	@ get addr of refresh reg
+	ldr	r5, [r6]		@ get value
+	mov	r5, r5, lsr #8		@ isolate rfr field and drop burst
+
+	cmp	r0, #0x1		@ going to half speed?
+	movne	r9, #0x0		@ if up set flag up for pre up, hi volt
+
+	blne	voltage_shift_c		@ adjust voltage
+
+	cmp	r0, #0x1		@ going to half speed (post branch link)
+	moveq	r5, r5, lsr #1		@ divide by 2 if to half
+	movne	r5, r5, lsl #1		@ mult by 2 if to full
+	mov	r5, r5, lsl #8		@ put rfr field back into place
+	add	r5, r5, #0x1		@ turn on burst of 1
+	ldr	r4, ddr_cm_clksel2_pll	@ get address of out reg
+	ldr	r3, [r4]		@ get curr value
+	orr	r3, r3, #0x3
+	bic	r3, r3, #0x3		@ clear lower bits
+	orr	r3, r3, r0		@ new state value
+	str	r3, [r4]		@ set new state (pll/x, x=1 or 2)
+	nop
+	nop
+
+	moveq	r9, #0x1		@ if speed down, post down, drop volt
+	bleq	voltage_shift_c
+
+	mcr	p15, 0, r3, c7, c10, 4	@ memory barrier
+	str	r5, [r6]		@ set new RFR_1 value
+	add	r6, r6, #0x30		@ get RFR_2 addr
+	str	r5, [r6]		@ set RFR_2
+	nop
+	cmp	r2, #0x1		@ (SDR or DDR) do we need to adjust DLL
+	bne	freq_out		@ leave if SDR, no DLL function
+
+	/* With DDR, we need to take care of the DLL for the frequency change */
+	ldr	r2, ddr_sdrc_dlla_ctrl	@ addr of dlla ctrl
+	str	r1, [r2]		@ write out new SDRC_DLLA_CTRL
+	add	r2, r2, #0x8		@ addr to SDRC_DLLB_CTRL
+	str	r1, [r2]		@ commit to SDRC_DLLB_CTRL
+	mov	r1, #0x2000		@ wait DLL relock, min 0x400 L3 clocks
+dll_wait:
+	subs	r1, r1, #0x1
+	bne	dll_wait
+freq_out:
+	ldmfd	sp!, {r0 - r10, pc}	@ restore regs and return
+
+    /*
+     * shift up or down voltage, use R9 as input to tell level.
+     *	wait for it to finish, use 32k sync counter, 1tick=31uS.
+     */
+voltage_shift_c:
+	ldr	r10, ddr_prcm_voltctrl	@ get addr of volt ctrl
+	ldr	r8, [r10]		@ get value
+	ldr	r7, ddr_prcm_mask_val	@ get value of mask
+	and	r8, r8, r7		@ apply mask to clear bits
+	orr	r8, r8, r9		@ bulld value for L0/L1-volt operation.
+	str	r8, [r10]		@ set up for change.
+	mov	r7, #0x4000		@ get val for force
+	orr	r8, r8, r7		@ build value for force
+	str	r8, [r10]		@ Force transition to L1
+
+	ldr	r10, ddr_timer_32ksynct	@ get addr of counter
+	ldr	r8, [r10]		@ get value
+	add	r8, r8, #0x2		@ give it at most 62uS (min 31+)
+volt_delay_c:
+	ldr	r7, [r10]		@ get timer value
+	cmp	r8, r7			@ time up?
+	bhi	volt_delay_c		@ not yet->branch
+	mov	pc, lr			@ back to caller
+
+ddr_cm_clksel2_pll:
+	.word CM_CLKSEL2_PLL_V
+ddr_sdrc_dlla_ctrl:
+	.word SDRC_DLLA_CTRL_V
+ddr_sdrc_rfr_ctrl:
+	.word SDRC_RFR_CTRL_V
+ddr_prcm_voltctrl:
+	.word PRCM_VOLTCTRL_V
+ddr_prcm_mask_val:
+	.word 0xFFFF3FFC
+ddr_timer_32ksynct:
+	.word TIMER_32KSYNCT_CR_V
+
+ENTRY(sram_reprogram_sdrc_sz)
+	.word	. - sram_reprogram_sdrc
+
+/*
+ * Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
+ */
+ENTRY(sram_set_prcm)
+	stmfd	sp!, {r0-r12, lr}	@ regs to stack
+	adr	r4, pbegin		@ addr of preload start
+	adr	r8, pend		@ addr of preload end
+	mcrr	p15, 1, r8, r4, c12	@ preload into icache
+pbegin:
+	/* move into fast relock bypass */
+	ldr	r8, pll_ctl		@ get addr
+	ldr	r5, [r8]		@ get val
+	mvn	r6, #0x3		@ clear mask
+	and	r5, r5, r6		@ clear field
+	orr	r7, r5, #0x2		@ fast relock val
+	str	r7, [r8]		@ go to fast relock
+	ldr	r4, pll_stat		@ addr of stat
+block:
+	/* wait for bypass */
+	ldr	r8, [r4]		@ stat value
+	and	r8, r8, #0x3		@ mask for stat
+	cmp	r8, #0x1		@ there yet
+	bne	block			@ loop if not
+
+	/* set new dpll dividers _after_ in bypass */
+	ldr	r4, pll_div		@ get addr
+	str	r0, [r4]		@ set dpll ctrl val
+
+	ldr	r4, set_config		@ get addr
+	mov	r8, #1			@ valid cfg msk
+	str	r8, [r4]		@ make dividers take
+
+	mov	r4, #100		@ dead spin a bit
+wait_a_bit:
+	subs	r4, r4, #1		@ dec loop
+	bne	wait_a_bit		@ delay done?
+
+	/* check if staying in bypass */
+	cmp	r2, #0x1		@ stay in bypass?
+	beq	pend			@ jump over dpll relock
+
+	/* relock DPLL with new vals */
+	ldr	r5, pll_stat		@ get addr
+	ldr	r4, pll_ctl		@ get addr
+	orr	r8, r7, #0x3		@ val for lock dpll
+	str	r8, [r4]		@ set val
+	mov	r0, #1000		@ dead spin a bit
+wait_more:
+	subs	r0, r0, #1		@ dec loop
+	bne	wait_more		@ delay done?
+wait_lock:
+	ldr	r8, [r5]		@ get lock val
+	and	r8, r8, #3		@ isolate field
+	cmp	r8, #2			@ locked?
+	bne	wait_lock		@ wait if not
+pend:
+	/* update memory timings & briefly lock dll */
+	ldr	r4, sdrc_rfr		@ get addr
+	str	r1, [r4]		@ update refresh timing
+	ldr	r11, dlla_ctrl		@ get addr of DLLA ctrl
+	ldr	r10, [r11]		@ get current val
+	mvn	r9, #0x4		@ mask to get clear bit2
+	and	r10, r10, r9		@ clear bit2 for lock mode
+	orr	r10, r10, #0x8		@ make sure DLL on (es2 bit pos)
+	str	r10, [r11]		@ commit to DLLA_CTRL
+	add	r11, r11, #0x8		@ move to dllb
+	str	r10, [r11]		@ hit DLLB also
+
+	mov	r4, #0x800		@ relock time (min 0x400 L3 clocks)
+wait_dll_lock:
+	subs	r4, r4, #0x1
+	bne	wait_dll_lock
+	nop
+	ldmfd	sp!, {r0-r12, pc}	@ restore regs and return
+
+set_config:
+	.word PRCM_CLKCFG_CTRL_V
+pll_ctl:
+	.word CM_CLKEN_PLL_V
+pll_stat:
+	.word CM_IDLEST_CKGEN_V
+pll_div:
+	.word CM_CLKSEL1_PLL_V
+sdrc_rfr:
+	.word SDRC_RFR_CTRL_V
+dlla_ctrl:
+	.word SDRC_DLLA_CTRL_V
+
+ENTRY(sram_set_prcm_sz)
+	.word	. - sram_set_prcm
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
new file mode 100644
index 000000000000..9ec11443200f
--- /dev/null
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -0,0 +1,126 @@
+/*
+ * linux/arch/arm/mach-omap2/timer-gp.c
+ *
+ * OMAP2 GP timer support.
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Paul Mundt <paul.mundt@nokia.com>
+ *         Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * Some parts based off of TI's 24xx code:
+ *
+ *   Copyright (C) 2004 Texas Instruments, Inc.
+ *
+ * Roughly modelled after the OMAP1 MPU timer code.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <asm/mach/time.h>
+#include <asm/delay.h>
+#include <asm/io.h>
+#include <asm/hardware/clock.h>
+
+#define OMAP2_GP_TIMER1_BASE	0x48028000
+#define OMAP2_GP_TIMER2_BASE	0x4802a000
+#define OMAP2_GP_TIMER3_BASE	0x48078000
+#define OMAP2_GP_TIMER4_BASE	0x4807a000
+
+#define GP_TIMER_TIDR		0x00
+#define GP_TIMER_TISR		0x18
+#define GP_TIMER_TIER		0x1c
+#define GP_TIMER_TCLR		0x24
+#define GP_TIMER_TCRR		0x28
+#define GP_TIMER_TLDR		0x2c
+#define GP_TIMER_TSICR		0x40
+
+#define OS_TIMER_NR		1  /* GP timer 2 */
+
+static unsigned long timer_base[] = {
+	IO_ADDRESS(OMAP2_GP_TIMER1_BASE),
+	IO_ADDRESS(OMAP2_GP_TIMER2_BASE),
+	IO_ADDRESS(OMAP2_GP_TIMER3_BASE),
+	IO_ADDRESS(OMAP2_GP_TIMER4_BASE),
+};
+
+static inline unsigned int timer_read_reg(int nr, unsigned int reg)
+{
+	return __raw_readl(timer_base[nr] + reg);
+}
+
+static inline void timer_write_reg(int nr, unsigned int reg, unsigned int val)
+{
+	__raw_writel(val, timer_base[nr] + reg);
+}
+
+/* Note that we always enable the clock prescale divider bit */
+static inline void omap2_gp_timer_start(int nr, unsigned long load_val)
+{
+	unsigned int tmp;
+
+	tmp = 0xffffffff - load_val;
+
+	timer_write_reg(nr, GP_TIMER_TLDR, tmp);
+	timer_write_reg(nr, GP_TIMER_TCRR, tmp);
+	timer_write_reg(nr, GP_TIMER_TIER, 1 << 1);
+	timer_write_reg(nr, GP_TIMER_TCLR, (1 << 5) | (1 << 1) | 1);
+}
+
+static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id,
+					    struct pt_regs *regs)
+{
+	write_seqlock(&xtime_lock);
+
+	timer_write_reg(OS_TIMER_NR, GP_TIMER_TISR, 1 << 1);
+	timer_tick(regs);
+
+	write_sequnlock(&xtime_lock);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction omap2_gp_timer_irq = {
+	.name		= "gp timer",
+	.flags		= SA_INTERRUPT,
+	.handler	= omap2_gp_timer_interrupt,
+};
+
+static void __init omap2_gp_timer_init(void)
+{
+	struct clk * sys_ck;
+	u32 tick_period = 120000;
+	u32 l;
+
+	/* Reset clock and prescale value */
+	timer_write_reg(OS_TIMER_NR, GP_TIMER_TCLR, 0);
+
+	sys_ck = clk_get(NULL, "sys_ck");
+	if (IS_ERR(sys_ck))
+		printk(KERN_ERR "Could not get sys_ck\n");
+	else {
+		clk_use(sys_ck);
+		tick_period = clk_get_rate(sys_ck) / 100;
+		clk_put(sys_ck);
+	}
+
+	tick_period /= 2;	/* Minimum prescale divider is 2 */
+	tick_period -= 1;
+
+	l = timer_read_reg(OS_TIMER_NR, GP_TIMER_TIDR);
+	printk(KERN_INFO "OMAP2 GP timer (HW version %d.%d)\n",
+	       (l >> 4) & 0x0f, l & 0x0f);
+
+	setup_irq(38, &omap2_gp_timer_irq);
+
+	omap2_gp_timer_start(OS_TIMER_NR, tick_period);
+}
+
+struct sys_timer omap_timer = {
+	.init	= omap2_gp_timer_init,
+};
+
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 3e5f69bb5ac4..2a58499c0968 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -27,7 +27,8 @@ config PXA_SHARPSL
 	  Say Y here if you intend to run this kernel on a
 	  Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
 	  SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
-	  SL-C3000 (Spitz) or SL-C3100 (Borzoi) handheld computer.
+	  SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
+	  handheld computer.
 
 endchoice
 
@@ -37,12 +38,13 @@ choice
 	prompt "Select target Sharp Zaurus device range"
 
 config PXA_SHARPSL_25x
-	bool "Sharp PXA25x models (SL-5600 and SL-C7xx)"
+	bool "Sharp PXA25x models (SL-5600, SL-C7xx and SL-C6000x)"
 	select PXA25x
 
 config PXA_SHARPSL_27x
 	bool "Sharp PXA270 models (SL-Cxx00)"
 	select PXA27x
+	select IWMMXT
 
 endchoice
 
@@ -70,6 +72,14 @@ config MACH_HUSKY
 	depends PXA_SHARPSL_25x
 	select PXA_SHARP_C7xx
 
+config MACH_AKITA
+	bool "Enable Sharp SL-1000 (Akita) Support"
+	depends PXA_SHARPSL_27x
+	select PXA_SHARP_Cxx00
+	select MACH_SPITZ
+	select I2C
+	select I2C_PXA
+
 config MACH_SPITZ
 	bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
 	depends PXA_SHARPSL_27x
@@ -80,6 +90,10 @@ config MACH_BORZOI
 	depends PXA_SHARPSL_27x
 	select PXA_SHARP_Cxx00
 
+config MACH_TOSA
+	bool "Enable Sharp SL-6000x (Tosa) Support"
+	depends PXA_SHARPSL_25x
+
 config PXA25x
 	bool
 	help
@@ -97,12 +111,18 @@ config IWMMXT
 
 config PXA_SHARP_C7xx
 	bool
+	select PXA_SSP
 	help
 	  Enable support for all Sharp C7xx models
 
 config PXA_SHARP_Cxx00
 	bool
+	select PXA_SSP
 	help
 	  Enable common support for Sharp Cxx00 models
 
+config PXA_SSP
+	tristate
+	help
+	  Enable support for PXA2xx SSP ports
 endif
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index f609a0f232cb..32526a0a6f86 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -11,9 +11,11 @@ obj-$(CONFIG_PXA27x) += pxa27x.o
 obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
 obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
 obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
-obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o corgi_ssp.o corgi_lcd.o ssp.o
-obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o corgi_ssp.o corgi_lcd.o ssp.o
+obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o
+obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o spitz_pm.o
+obj-$(CONFIG_MACH_AKITA)	+= akita-ioexp.o
 obj-$(CONFIG_MACH_POODLE)	+= poodle.o
+obj-$(CONFIG_MACH_TOSA)         += tosa.o
 
 # Support for blinky lights
 led-y := leds.o
@@ -25,6 +27,7 @@ obj-$(CONFIG_LEDS) += $(led-y)
 
 # Misc features
 obj-$(CONFIG_PM) += pm.o sleep.o
+obj-$(CONFIG_PXA_SSP) += ssp.o
 
 ifeq ($(CONFIG_PXA27x),y)
 obj-$(CONFIG_PM) += standby.o
diff --git a/arch/arm/mach-pxa/akita-ioexp.c b/arch/arm/mach-pxa/akita-ioexp.c
new file mode 100644
index 000000000000..f6d73cc01f78
--- /dev/null
+++ b/arch/arm/mach-pxa/akita-ioexp.c
@@ -0,0 +1,223 @@
+/*
+ * Support for the Extra GPIOs on the Sharp SL-C1000 (Akita)
+ * (uses a Maxim MAX7310 8 Port IO Expander)
+ *
+ * Copyright 2005 Openedhand Ltd.
+ *
+ * Author: Richard Purdie <richard@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <asm/arch/akita.h>
+
+/* MAX7310 Regiser Map */
+#define MAX7310_INPUT    0x00
+#define MAX7310_OUTPUT   0x01
+#define MAX7310_POLINV   0x02
+#define MAX7310_IODIR    0x03 /* 1 = Input, 0 = Output */
+#define MAX7310_TIMEOUT  0x04
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x18, I2C_CLIENT_END };
+
+/* I2C Magic */
+I2C_CLIENT_INSMOD;
+
+static int max7310_write(struct i2c_client *client, int address, int data);
+static struct i2c_client max7310_template;
+static void akita_ioexp_work(void *private_);
+
+static struct device *akita_ioexp_device;
+static unsigned char ioexp_output_value = AKITA_IOEXP_IO_OUT;
+DECLARE_WORK(akita_ioexp, akita_ioexp_work, NULL);
+
+
+/*
+ * MAX7310 Access
+ */
+static int max7310_config(struct device *dev, int iomode, int polarity)
+{
+	int ret;
+	struct i2c_client *client = to_i2c_client(dev);
+
+	ret = max7310_write(client, MAX7310_POLINV, polarity);
+	if (ret < 0)
+		return ret;
+	ret = max7310_write(client, MAX7310_IODIR, iomode);
+	return ret;
+}
+
+static int max7310_set_ouputs(struct device *dev, int outputs)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	return max7310_write(client, MAX7310_OUTPUT, outputs);
+}
+
+/*
+ * I2C Functions
+ */
+static int max7310_write(struct i2c_client *client, int address, int value)
+{
+	u8 data[2];
+
+	data[0] = address & 0xff;
+	data[1] = value & 0xff;
+
+	if (i2c_master_send(client, data, 2) == 2)
+		return 0;
+	return -1;
+}
+
+static int max7310_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	int err;
+
+	if (!(new_client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL)))
+		return -ENOMEM;
+
+	max7310_template.adapter = adapter;
+	max7310_template.addr = address;
+
+	memcpy(new_client, &max7310_template, sizeof(struct i2c_client));
+
+	if ((err = i2c_attach_client(new_client))) {
+		kfree(new_client);
+		return err;
+	}
+
+	max7310_config(&new_client->dev, AKITA_IOEXP_IO_DIR, 0);
+	akita_ioexp_device = &new_client->dev;
+	schedule_work(&akita_ioexp);
+
+	return 0;
+}
+
+static int max7310_attach_adapter(struct i2c_adapter *adapter)
+{
+	return i2c_probe(adapter, &addr_data, max7310_detect);
+}
+
+static int max7310_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	akita_ioexp_device = NULL;
+
+	if ((err = i2c_detach_client(client)))
+		return err;
+
+	kfree(client);
+	return 0;
+}
+
+static struct i2c_driver max7310_i2c_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "akita-max7310",
+	.id		= I2C_DRIVERID_AKITAIOEXP,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= max7310_attach_adapter,
+	.detach_client	= max7310_detach_client,
+};
+
+static struct i2c_client max7310_template = {
+	name:   "akita-max7310",
+	flags:  I2C_CLIENT_ALLOW_USE,
+	driver: &max7310_i2c_driver,
+};
+
+void akita_set_ioexp(struct device *dev, unsigned char bit)
+{
+	ioexp_output_value |= bit;
+
+	if (akita_ioexp_device)
+		schedule_work(&akita_ioexp);
+	return;
+}
+
+void akita_reset_ioexp(struct device *dev, unsigned char bit)
+{
+	ioexp_output_value &= ~bit;
+
+	if (akita_ioexp_device)
+		schedule_work(&akita_ioexp);
+	return;
+}
+
+EXPORT_SYMBOL(akita_set_ioexp);
+EXPORT_SYMBOL(akita_reset_ioexp);
+
+static void akita_ioexp_work(void *private_)
+{
+	if (akita_ioexp_device)
+		max7310_set_ouputs(akita_ioexp_device, ioexp_output_value);
+}
+
+
+#ifdef CONFIG_PM
+static int akita_ioexp_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	flush_scheduled_work();
+	return 0;
+}
+
+static int akita_ioexp_resume(struct platform_device *pdev)
+{
+	schedule_work(&akita_ioexp);
+	return 0;
+}
+#else
+#define akita_ioexp_suspend NULL
+#define akita_ioexp_resume NULL
+#endif
+
+static int __init akita_ioexp_probe(struct platform_device *pdev)
+{
+	return i2c_add_driver(&max7310_i2c_driver);
+}
+
+static int akita_ioexp_remove(struct platform_device *pdev)
+{
+	i2c_del_driver(&max7310_i2c_driver);
+	return 0;
+}
+
+static struct platform_driver akita_ioexp_driver = {
+	.probe		= akita_ioexp_probe,
+	.remove		= akita_ioexp_remove,
+	.suspend	= akita_ioexp_suspend,
+	.resume		= akita_ioexp_resume,
+	.driver		= {
+		.name	= "akita-ioexp",
+	},
+};
+
+static int __init akita_ioexp_init(void)
+{
+	return platform_driver_register(&akita_ioexp_driver);
+}
+
+static void __exit akita_ioexp_exit(void)
+{
+	platform_driver_unregister(&akita_ioexp_driver);
+}
+
+MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>");
+MODULE_DESCRIPTION("Akita IO-Expander driver");
+MODULE_LICENSE("GPL");
+
+fs_initcall(akita_ioexp_init);
+module_exit(akita_ioexp_exit);
+
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index be37586cb1b0..100fb31b5156 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -14,7 +14,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/major.h>
 #include <linux/fs.h>
 #include <linux/interrupt.h>
@@ -33,9 +33,11 @@
 
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/irq.h>
+#include <asm/arch/irda.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/udc.h>
 #include <asm/arch/corgi.h>
+#include <asm/arch/sharpsl.h>
 
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/scoop.h>
@@ -60,6 +62,37 @@ static struct scoop_config corgi_scoop_setup = {
 	.io_out		= CORGI_SCOOP_IO_OUT,
 };
 
+struct platform_device corgiscoop_device = {
+	.name		= "sharp-scoop",
+	.id		= -1,
+	.dev		= {
+ 		.platform_data	= &corgi_scoop_setup,
+	},
+	.num_resources	= ARRAY_SIZE(corgi_scoop_resources),
+	.resource	= corgi_scoop_resources,
+};
+
+static void corgi_pcmcia_init(void)
+{
+	/* Setup default state of GPIO outputs
+	   before we enable them as outputs. */
+	GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
+		GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
+		GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
+		GPIO_bit(GPIO53_nPCE_2);
+
+	pxa_gpio_mode(GPIO48_nPOE_MD);
+	pxa_gpio_mode(GPIO49_nPWE_MD);
+	pxa_gpio_mode(GPIO50_nPIOR_MD);
+	pxa_gpio_mode(GPIO51_nPIOW_MD);
+	pxa_gpio_mode(GPIO55_nPREG_MD);
+	pxa_gpio_mode(GPIO56_nPWAIT_MD);
+	pxa_gpio_mode(GPIO57_nIOIS16_MD);
+	pxa_gpio_mode(GPIO52_nPCE_1_MD);
+	pxa_gpio_mode(GPIO53_nPCE_2_MD);
+	pxa_gpio_mode(GPIO54_pSKTSEL_MD);
+}
+
 static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
 {
 	.dev        = &corgiscoop_device.dev,
@@ -69,16 +102,14 @@ static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
 },
 };
 
-struct platform_device corgiscoop_device = {
-	.name		= "sharp-scoop",
-	.id		= -1,
-	.dev		= {
- 		.platform_data	= &corgi_scoop_setup,
-	},
-	.num_resources	= ARRAY_SIZE(corgi_scoop_resources),
-	.resource	= corgi_scoop_resources,
+static struct scoop_pcmcia_config corgi_pcmcia_config = {
+	.devs         = &corgi_pcmcia_scoop[0],
+	.num_devs     = 1,
+	.pcmcia_init  = corgi_pcmcia_init,
 };
 
+EXPORT_SYMBOL(corgiscoop_device);
+
 
 /*
  * Corgi SSP Device
@@ -223,6 +254,22 @@ static struct pxamci_platform_data corgi_mci_platform_data = {
 };
 
 
+/*
+ * Irda
+ */
+static void corgi_irda_transceiver_mode(struct device *dev, int mode)
+{
+	if (mode & IR_OFF)
+		GPSR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
+	else
+		GPCR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
+}
+
+static struct pxaficp_platform_data corgi_ficp_platform_data = {
+	.transceiver_cap  = IR_SIRMODE | IR_OFF,
+	.transceiver_mode = corgi_irda_transceiver_mode,
+};
+
 
 /*
  * USB Device Controller
@@ -268,13 +315,15 @@ static void __init corgi_init(void)
 
 	corgi_ssp_set_machinfo(&corgi_ssp_machinfo);
 
+	pxa_gpio_mode(CORGI_GPIO_IR_ON | GPIO_OUT);
 	pxa_gpio_mode(CORGI_GPIO_USB_PULLUP | GPIO_OUT);
 	pxa_gpio_mode(CORGI_GPIO_HSYNC | GPIO_IN);
+
  	pxa_set_udc_info(&udc_info);
 	pxa_set_mci_info(&corgi_mci_platform_data);
+	pxa_set_ficp_info(&corgi_ficp_platform_data);
 
-	scoop_num = 1;
-	scoop_devs = &corgi_pcmcia_scoop[0];
+	platform_scoop_config = &corgi_pcmcia_config;
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c
index c5efcd04fcbc..6dbcaf114ad7 100644
--- a/arch/arm/mach-pxa/corgi_lcd.c
+++ b/arch/arm/mach-pxa/corgi_lcd.c
@@ -17,12 +17,12 @@
 
 #include <linux/delay.h>
 #include <linux/kernel.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/module.h>
-#include <asm/mach-types.h>
+#include <linux/string.h>
 #include <asm/arch/akita.h>
 #include <asm/arch/corgi.h>
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/sharpsl.h>
 #include <asm/arch/spitz.h>
@@ -468,6 +468,7 @@ void corgi_put_hsync(void)
 {
 	if (get_hsync_time)
 		symbol_put(w100fb_get_hsynclen);
+	get_hsync_time = NULL;
 }
 
 void corgi_wait_hsync(void)
@@ -477,20 +478,39 @@ void corgi_wait_hsync(void)
 #endif
 
 #ifdef CONFIG_PXA_SHARP_Cxx00
+static struct device *spitz_pxafb_dev;
+
+static int is_pxafb_device(struct device * dev, void * data)
+{
+	struct platform_device *pdev = container_of(dev, struct platform_device, dev);
+
+	return (strncmp(pdev->name, "pxa2xx-fb", 9) == 0);
+}
+
 unsigned long spitz_get_hsync_len(void)
 {
+#ifdef CONFIG_FB_PXA
+	if (!spitz_pxafb_dev) {
+		spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device);
+		if (!spitz_pxafb_dev)
+			return 0;
+	}
 	if (!get_hsync_time)
 		get_hsync_time = symbol_get(pxafb_get_hsync_time);
 	if (!get_hsync_time)
+#endif
 		return 0;
 
-	return pxafb_get_hsync_time(&pxafb_device.dev);
+	return pxafb_get_hsync_time(spitz_pxafb_dev);
 }
 
 void spitz_put_hsync(void)
 {
+	put_device(spitz_pxafb_dev);
 	if (get_hsync_time)
 		symbol_put(pxafb_get_hsync_time);
+	spitz_pxafb_dev = NULL;
+	get_hsync_time = NULL;
 }
 
 void spitz_wait_hsync(void)
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
new file mode 100644
index 000000000000..599be14754f9
--- /dev/null
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -0,0 +1,228 @@
+/*
+ * Battery and Power Management code for the Sharp SL-C7xx
+ *
+ * Copyright (c) 2005 Richard Purdie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/stat.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <asm/apm.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/hardware/scoop.h>
+
+#include <asm/arch/sharpsl.h>
+#include <asm/arch/corgi.h>
+#include <asm/arch/pxa-regs.h>
+#include "sharpsl.h"
+
+static void corgi_charger_init(void)
+{
+	pxa_gpio_mode(CORGI_GPIO_ADC_TEMP_ON | GPIO_OUT);
+	pxa_gpio_mode(CORGI_GPIO_CHRG_ON | GPIO_OUT);
+	pxa_gpio_mode(CORGI_GPIO_CHRG_UKN | GPIO_OUT);
+	pxa_gpio_mode(CORGI_GPIO_KEY_INT | GPIO_IN);
+}
+
+static void corgi_charge_led(int val)
+{
+	if (val == SHARPSL_LED_ERROR) {
+		dev_dbg(sharpsl_pm.dev, "Charge LED Error\n");
+	} else if (val == SHARPSL_LED_ON) {
+		dev_dbg(sharpsl_pm.dev, "Charge LED On\n");
+		GPSR0 = GPIO_bit(CORGI_GPIO_LED_ORANGE);
+	} else {
+		dev_dbg(sharpsl_pm.dev, "Charge LED Off\n");
+		GPCR0 = GPIO_bit(CORGI_GPIO_LED_ORANGE);
+	}
+}
+
+static void corgi_measure_temp(int on)
+{
+	if (on)
+		GPSR(CORGI_GPIO_ADC_TEMP_ON) = GPIO_bit(CORGI_GPIO_ADC_TEMP_ON);
+	else
+		GPCR(CORGI_GPIO_ADC_TEMP_ON) = GPIO_bit(CORGI_GPIO_ADC_TEMP_ON);
+}
+
+static void corgi_charge(int on)
+{
+	if (on) {
+		if (machine_is_corgi() && (sharpsl_pm.flags & SHARPSL_SUSPENDED)) {
+			GPCR(CORGI_GPIO_CHRG_ON) = GPIO_bit(CORGI_GPIO_CHRG_ON);
+			GPSR(CORGI_GPIO_CHRG_UKN) = GPIO_bit(CORGI_GPIO_CHRG_UKN);
+		} else {
+			GPSR(CORGI_GPIO_CHRG_ON) = GPIO_bit(CORGI_GPIO_CHRG_ON);
+			GPCR(CORGI_GPIO_CHRG_UKN) = GPIO_bit(CORGI_GPIO_CHRG_UKN);
+		}
+	} else {
+		GPCR(CORGI_GPIO_CHRG_ON) = GPIO_bit(CORGI_GPIO_CHRG_ON);
+		GPCR(CORGI_GPIO_CHRG_UKN) = GPIO_bit(CORGI_GPIO_CHRG_UKN);
+	}
+}
+
+static void corgi_discharge(int on)
+{
+	if (on)
+		GPSR(CORGI_GPIO_DISCHARGE_ON) = GPIO_bit(CORGI_GPIO_DISCHARGE_ON);
+	else
+		GPCR(CORGI_GPIO_DISCHARGE_ON) = GPIO_bit(CORGI_GPIO_DISCHARGE_ON);
+}
+
+static void corgi_presuspend(void)
+{
+	int i;
+	unsigned long wakeup_mask;
+
+	/* charging , so CHARGE_ON bit is HIGH during OFF. */
+	if (READ_GPIO_BIT(CORGI_GPIO_CHRG_ON))
+		PGSR1 |= GPIO_bit(CORGI_GPIO_CHRG_ON);
+	else
+		PGSR1 &= ~GPIO_bit(CORGI_GPIO_CHRG_ON);
+
+	if (READ_GPIO_BIT(CORGI_GPIO_LED_ORANGE))
+		PGSR0 |= GPIO_bit(CORGI_GPIO_LED_ORANGE);
+	else
+		PGSR0 &= ~GPIO_bit(CORGI_GPIO_LED_ORANGE);
+
+	if (READ_GPIO_BIT(CORGI_GPIO_CHRG_UKN))
+		PGSR1 |= GPIO_bit(CORGI_GPIO_CHRG_UKN);
+	else
+		PGSR1 &= ~GPIO_bit(CORGI_GPIO_CHRG_UKN);
+
+	/* Resume on keyboard power key */
+	PGSR2 = (PGSR2 & ~CORGI_GPIO_ALL_STROBE_BIT) | CORGI_GPIO_STROBE_BIT(0);
+
+	wakeup_mask = GPIO_bit(CORGI_GPIO_KEY_INT) | GPIO_bit(CORGI_GPIO_WAKEUP) | GPIO_bit(CORGI_GPIO_AC_IN) | GPIO_bit(CORGI_GPIO_CHRG_FULL);
+
+	if (!machine_is_corgi())
+		wakeup_mask |= GPIO_bit(CORGI_GPIO_MAIN_BAT_LOW);
+
+	PWER = wakeup_mask | PWER_RTC;
+	PRER = wakeup_mask;
+	PFER = wakeup_mask;
+
+	for (i = 0; i <=15; i++) {
+		if (PRER & PFER & GPIO_bit(i)) {
+			if (GPLR0 & GPIO_bit(i) )
+				PRER &= ~GPIO_bit(i);
+			else
+				PFER &= ~GPIO_bit(i);
+		}
+	}
+}
+
+static void corgi_postsuspend(void)
+{
+}
+
+/*
+ * Check what brought us out of the suspend.
+ * Return: 0 to sleep, otherwise wake
+ */
+static int corgi_should_wakeup(unsigned int resume_on_alarm)
+{
+	int is_resume = 0;
+
+	dev_dbg(sharpsl_pm.dev, "GPLR0 = %x,%x\n", GPLR0, PEDR);
+
+	if ((PEDR & GPIO_bit(CORGI_GPIO_AC_IN))) {
+		if (STATUS_AC_IN()) {
+			/* charge on */
+			dev_dbg(sharpsl_pm.dev, "ac insert\n");
+			sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
+		} else {
+			/* charge off */
+			dev_dbg(sharpsl_pm.dev, "ac remove\n");
+			CHARGE_LED_OFF();
+			CHARGE_OFF();
+			sharpsl_pm.charge_mode = CHRG_OFF;
+		}
+	}
+
+	if ((PEDR & GPIO_bit(CORGI_GPIO_CHRG_FULL)))
+		dev_dbg(sharpsl_pm.dev, "Charge full interrupt\n");
+
+	if (PEDR & GPIO_bit(CORGI_GPIO_KEY_INT))
+		is_resume |= GPIO_bit(CORGI_GPIO_KEY_INT);
+
+	if (PEDR & GPIO_bit(CORGI_GPIO_WAKEUP))
+		is_resume |= GPIO_bit(CORGI_GPIO_WAKEUP);
+
+	if (resume_on_alarm && (PEDR & PWER_RTC))
+		is_resume |= PWER_RTC;
+
+	dev_dbg(sharpsl_pm.dev, "is_resume: %x\n",is_resume);
+	return is_resume;
+}
+
+static unsigned long corgi_charger_wakeup(void)
+{
+	return ~GPLR0 & ( GPIO_bit(CORGI_GPIO_AC_IN) | GPIO_bit(CORGI_GPIO_KEY_INT) | GPIO_bit(CORGI_GPIO_WAKEUP) );
+}
+
+static int corgi_acin_status(void)
+{
+	return ((GPLR(CORGI_GPIO_AC_IN) & GPIO_bit(CORGI_GPIO_AC_IN)) != 0);
+}
+
+static struct sharpsl_charger_machinfo corgi_pm_machinfo = {
+	.init            = corgi_charger_init,
+	.gpio_batlock    = CORGI_GPIO_BAT_COVER,
+	.gpio_acin       = CORGI_GPIO_AC_IN,
+	.gpio_batfull    = CORGI_GPIO_CHRG_FULL,
+	.status_acin     = corgi_acin_status,
+	.discharge       = corgi_discharge,
+	.charge          = corgi_charge,
+	.chargeled       = corgi_charge_led,
+	.measure_temp    = corgi_measure_temp,
+	.presuspend      = corgi_presuspend,
+	.postsuspend     = corgi_postsuspend,
+	.charger_wakeup  = corgi_charger_wakeup,
+	.should_wakeup   = corgi_should_wakeup,
+	.bat_levels      = 40,
+	.bat_levels_noac = spitz_battery_levels_noac,
+	.bat_levels_acin = spitz_battery_levels_acin,
+	.status_high_acin = 188,
+	.status_low_acin  = 178,
+	.status_high_noac = 185,
+	.status_low_noac  = 175,
+};
+
+static struct platform_device *corgipm_device;
+
+static int __devinit corgipm_init(void)
+{
+	int ret;
+
+	corgipm_device = platform_device_alloc("sharpsl-pm", -1);
+	if (!corgipm_device)
+		return -ENOMEM;
+
+	corgipm_device->dev.platform_data = &corgi_pm_machinfo;
+	ret = platform_device_add(corgipm_device);
+
+	if (ret)
+		platform_device_put(corgipm_device);
+
+	return ret;
+}
+
+static void corgipm_exit(void)
+{
+	platform_device_unregister(corgipm_device);
+}
+
+module_init(corgipm_init);
+module_exit(corgipm_exit);
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
index 0ef428287055..b371d723635f 100644
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ b/arch/arm/mach-pxa/corgi_ssp.c
@@ -15,7 +15,7 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
 
@@ -191,7 +191,7 @@ void __init corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo)
 	ssp_machinfo = machinfo;
 }
 
-static int __init corgi_ssp_probe(struct device *dev)
+static int __init corgi_ssp_probe(struct platform_device *dev)
 {
 	int ret;
 
@@ -203,7 +203,7 @@ static int __init corgi_ssp_probe(struct device *dev)
 	GPDR(ssp_machinfo->cs_ads7846) |= GPIO_bit(ssp_machinfo->cs_ads7846);  /* output */
 	GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);   /* High - Disable ADS7846*/
 
-	ret = ssp_init(&corgi_ssp_dev,ssp_machinfo->port);
+	ret = ssp_init(&corgi_ssp_dev, ssp_machinfo->port, 0);
 
 	if (ret)
 		printk(KERN_ERR "Unable to register SSP handler!\n");
@@ -216,45 +216,44 @@ static int __init corgi_ssp_probe(struct device *dev)
 	return ret;
 }
 
-static int corgi_ssp_remove(struct device *dev)
+static int corgi_ssp_remove(struct platform_device *dev)
 {
 	ssp_exit(&corgi_ssp_dev);
 	return 0;
 }
 
-static int corgi_ssp_suspend(struct device *dev, pm_message_t state, u32 level)
+static int corgi_ssp_suspend(struct platform_device *dev, pm_message_t state)
 {
-	if (level == SUSPEND_POWER_DOWN) {
-		ssp_flush(&corgi_ssp_dev);
-		ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state);
-	}
+	ssp_flush(&corgi_ssp_dev);
+	ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state);
+
 	return 0;
 }
 
-static int corgi_ssp_resume(struct device *dev, u32 level)
+static int corgi_ssp_resume(struct platform_device *dev)
 {
-	if (level == RESUME_POWER_ON) {
-		GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);  /* High - Disable LCD Control/Timing Gen */
-		GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/
-		GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/
-		ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state);
-		ssp_enable(&corgi_ssp_dev);
-	}
+	GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);  /* High - Disable LCD Control/Timing Gen */
+	GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/
+	GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/
+	ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state);
+	ssp_enable(&corgi_ssp_dev);
+
 	return 0;
 }
 
-static struct device_driver corgissp_driver = {
-	.name		= "corgi-ssp",
-	.bus		= &platform_bus_type,
+static struct platform_driver corgissp_driver = {
 	.probe		= corgi_ssp_probe,
 	.remove		= corgi_ssp_remove,
 	.suspend	= corgi_ssp_suspend,
 	.resume		= corgi_ssp_resume,
+	.driver		= {
+		.name	= "corgi-ssp",
+	},
 };
 
 int __init corgi_ssp_init(void)
 {
-	return driver_register(&corgissp_driver);
+	return platform_driver_register(&corgissp_driver);
 }
 
 arch_initcall(corgi_ssp_init);
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index a45aaa115a76..9b48a90aefce 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -20,9 +20,10 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/ioport.h>
 #include <linux/pm.h>
+#include <linux/string.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
@@ -34,6 +35,8 @@
 #include <asm/arch/udc.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/mmc.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/i2c.h>
 
 #include "generic.h"
 
@@ -91,14 +94,42 @@ EXPORT_SYMBOL(pxa_set_cken);
  *         and cache flush area.
  */
 static struct map_desc standard_io_desc[] __initdata = {
- /* virtual     physical    length      type */
-  { 0xf2000000, 0x40000000, 0x02000000, MT_DEVICE }, /* Devs */
-  { 0xf4000000, 0x44000000, 0x00100000, MT_DEVICE }, /* LCD */
-  { 0xf6000000, 0x48000000, 0x00100000, MT_DEVICE }, /* Mem Ctl */
-  { 0xf8000000, 0x4c000000, 0x00100000, MT_DEVICE }, /* USB host */
-  { 0xfa000000, 0x50000000, 0x00100000, MT_DEVICE }, /* Camera */
-  { 0xfe000000, 0x58000000, 0x00100000, MT_DEVICE }, /* IMem ctl */
-  { 0xff000000, 0x00000000, 0x00100000, MT_DEVICE }  /* UNCACHED_PHYS_0 */
+  	{	/* Devs */
+		.virtual	=  0xf2000000,
+		.pfn		= __phys_to_pfn(0x40000000),
+		.length		= 0x02000000,
+		.type		= MT_DEVICE
+	}, {	/* LCD */
+		.virtual	=  0xf4000000,
+		.pfn		= __phys_to_pfn(0x44000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}, {	/* Mem Ctl */
+		.virtual	=  0xf6000000,
+		.pfn		= __phys_to_pfn(0x48000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}, {	/* USB host */
+		.virtual	=  0xf8000000,
+		.pfn		= __phys_to_pfn(0x4c000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}, {	/* Camera */
+		.virtual	=  0xfa000000,
+		.pfn		= __phys_to_pfn(0x50000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}, {	/* IMem ctl */
+		.virtual	=  0xfe000000,
+		.pfn		= __phys_to_pfn(0x58000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}, {	/* UNCACHED_PHYS_0 */
+		.virtual	= 0xff000000,
+		.pfn		= __phys_to_pfn(0x00000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}
 };
 
 void __init pxa_map_io(void)
@@ -207,6 +238,11 @@ static struct platform_device pxafb_device = {
 	.resource	= pxafb_resources,
 };
 
+void __init set_pxa_fb_parent(struct device *parent_dev)
+{
+	pxafb_device.dev.parent = parent_dev;
+}
+
 static struct platform_device ffuart_device = {
 	.name		= "pxa2xx-uart",
 	.id		= 0,
@@ -219,6 +255,10 @@ static struct platform_device stuart_device = {
 	.name		= "pxa2xx-uart",
 	.id		= 2,
 };
+static struct platform_device hwuart_device = {
+	.name		= "pxa2xx-uart",
+	.id		= 3,
+};
 
 static struct resource i2c_resources[] = {
 	{
@@ -244,6 +284,41 @@ void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info)
 	i2c_device.dev.platform_data = info;
 }
 
+static struct resource i2s_resources[] = {
+	{
+		.start	= 0x40400000,
+		.end	= 0x40400083,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_I2S,
+		.end	= IRQ_I2S,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2s_device = {
+	.name		= "pxa2xx-i2s",
+	.id		= -1,
+	.resource	= i2s_resources,
+	.num_resources	= ARRAY_SIZE(i2s_resources),
+};
+
+static u64 pxaficp_dmamask = ~(u32)0;
+
+static struct platform_device pxaficp_device = {
+	.name		= "pxa2xx-ir",
+	.id		= -1,
+	.dev		= {
+		.dma_mask = &pxaficp_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+};
+
+void __init pxa_set_ficp_info(struct pxaficp_platform_data *info)
+{
+	pxaficp_device.dev.platform_data = info;
+}
+
 static struct platform_device *devices[] __initdata = {
 	&pxamci_device,
 	&udc_device,
@@ -251,12 +326,26 @@ static struct platform_device *devices[] __initdata = {
 	&ffuart_device,
 	&btuart_device,
 	&stuart_device,
+	&pxaficp_device,
 	&i2c_device,
+	&i2s_device,
 };
 
 static int __init pxa_init(void)
 {
-	return platform_add_devices(devices, ARRAY_SIZE(devices));
+	int cpuid, ret;
+
+	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
+	if (ret)
+		return ret;
+
+	/* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
+	cpuid = read_cpuid(CPUID_ID);
+	if (((cpuid >> 4) & 0xfff) == 0x2d0 ||
+	    ((cpuid >> 4) & 0xfff) == 0x290)
+		ret = platform_device_register(&hwuart_device);
+
+	return ret;
 }
 
 subsys_initcall(pxa_init);
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 386e107b53cc..7de159e2ab42 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -18,7 +18,7 @@
 
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/fb.h>
 
 #include <asm/setup.h>
@@ -152,16 +152,17 @@ static void __init idp_init_irq(void)
 }
 
 static struct map_desc idp_io_desc[] __initdata = {
- /* virtual     physical    length      type */
-
-  { IDP_COREVOLT_VIRT,
-    IDP_COREVOLT_PHYS,
-    IDP_COREVOLT_SIZE,
-    MT_DEVICE },
-  { IDP_CPLD_VIRT,
-    IDP_CPLD_PHYS,
-    IDP_CPLD_SIZE,
-    MT_DEVICE }
+  	{
+		.virtual	=  IDP_COREVOLT_VIRT,
+		.pfn		= __phys_to_pfn(IDP_COREVOLT_PHYS),
+		.length		= IDP_COREVOLT_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	=  IDP_CPLD_VIRT,
+		.pfn		= __phys_to_pfn(IDP_CPLD_PHYS),
+		.length		= IDP_CPLD_SIZE,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init idp_map_io(void)
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 1f38033921e9..b464bc88ff93 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -14,27 +14,32 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/major.h>
 #include <linux/fb.h>
 #include <linux/interrupt.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
 
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
 #include <asm/hardware.h>
 #include <asm/irq.h>
+#include <asm/sizes.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
 
 #include <asm/hardware/sa1111.h>
 
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/lubbock.h>
 #include <asm/arch/udc.h>
+#include <asm/arch/irda.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/mmc.h>
 
@@ -174,7 +179,7 @@ static struct platform_device sa1111_device = {
 static struct resource smc91x_resources[] = {
 	[0] = {
 		.name	= "smc91x-regs",
-		.start	= 0x0c000000,
+		.start	= 0x0c000c00,
 		.end	= 0x0c0fffff,
 		.flags	= IORESOURCE_MEM,
 	},
@@ -198,10 +203,75 @@ static struct platform_device smc91x_device = {
 	.resource	= smc91x_resources,
 };
 
+static struct resource flash_resources[] = {
+	[0] = {
+		.start	= 0x00000000,
+		.end	= SZ_64M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 0x04000000,
+		.end	= 0x04000000 + SZ_64M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct mtd_partition lubbock_partitions[] = {
+	{
+		.name =		"Bootloader",
+		.size =		0x00040000,
+		.offset =	0,
+		.mask_flags =	MTD_WRITEABLE  /* force read-only */
+	},{
+		.name =		"Kernel",
+		.size =		0x00100000,
+		.offset =	0x00040000,
+	},{
+		.name =		"Filesystem",
+		.size =		MTDPART_SIZ_FULL,
+		.offset =	0x00140000
+	}
+};
+
+static struct flash_platform_data lubbock_flash_data[2] = {
+	{
+		.map_name	= "cfi_probe",
+		.parts		= lubbock_partitions,
+		.nr_parts	= ARRAY_SIZE(lubbock_partitions),
+	}, {
+		.map_name	= "cfi_probe",
+		.parts		= NULL,
+		.nr_parts	= 0,
+	}
+};
+
+static struct platform_device lubbock_flash_device[2] = {
+	{
+		.name		= "pxa2xx-flash",
+		.id		= 0,
+		.dev = {
+			.platform_data = &lubbock_flash_data[0],
+		},
+		.resource = &flash_resources[0],
+		.num_resources = 1,
+	},
+	{
+		.name		= "pxa2xx-flash",
+		.id		= 1,
+		.dev = {
+			.platform_data = &lubbock_flash_data[1],
+		},
+		.resource = &flash_resources[1],
+		.num_resources = 1,
+	},
+};
+
 static struct platform_device *devices[] __initdata = {
 	&sa1111_device,
 	&lub_audio_device,
 	&smc91x_device,
+	&lubbock_flash_device[0],
+	&lubbock_flash_device[1],
 };
 
 static struct pxafb_mach_info sharp_lm8v31 __initdata = {
@@ -223,30 +293,122 @@ static struct pxafb_mach_info sharp_lm8v31 __initdata = {
 	.lccr3		= LCCR3_PCP | LCCR3_Acb(255),
 };
 
-static int lubbock_mci_init(struct device *dev, irqreturn_t (*lubbock_detect_int)(int, void *, struct pt_regs *), void *data)
+#define	MMC_POLL_RATE		msecs_to_jiffies(1000)
+
+static void lubbock_mmc_poll(unsigned long);
+static irqreturn_t (*mmc_detect_int)(int, void *, struct pt_regs *);
+
+static struct timer_list mmc_timer = {
+	.function	= lubbock_mmc_poll,
+};
+
+static void lubbock_mmc_poll(unsigned long data)
+{
+	unsigned long flags;
+
+	/* clear any previous irq state, then ... */
+	local_irq_save(flags);
+	LUB_IRQ_SET_CLR &= ~(1 << 0);
+	local_irq_restore(flags);
+
+	/* poll until mmc/sd card is removed */
+	if (LUB_IRQ_SET_CLR & (1 << 0))
+		mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
+	else {
+		(void) mmc_detect_int(LUBBOCK_SD_IRQ, (void *)data, NULL);
+		enable_irq(LUBBOCK_SD_IRQ);
+	}
+}
+
+static irqreturn_t lubbock_detect_int(int irq, void *data, struct pt_regs *regs)
+{
+	/* IRQ is level triggered; disable, and poll for removal */
+	disable_irq(irq);
+	mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
+
+	return mmc_detect_int(irq, data, regs);
+}
+
+static int lubbock_mci_init(struct device *dev,
+		irqreturn_t (*detect_int)(int, void *, struct pt_regs *),
+		void *data)
 {
 	/* setup GPIO for PXA25x MMC controller	*/
 	pxa_gpio_mode(GPIO6_MMCCLK_MD);
 	pxa_gpio_mode(GPIO8_MMCCS0_MD);
 
-	return 0;
+	/* detect card insert/eject */
+	mmc_detect_int = detect_int;
+	init_timer(&mmc_timer);
+	mmc_timer.data = (unsigned long) data;
+	return request_irq(LUBBOCK_SD_IRQ, lubbock_detect_int,
+			SA_SAMPLE_RANDOM, "lubbock-sd-detect", data);
+}
+
+static int lubbock_mci_get_ro(struct device *dev)
+{
+	return (LUB_MISC_RD & (1 << 2)) != 0;
+}
+
+static void lubbock_mci_exit(struct device *dev, void *data)
+{
+	free_irq(LUBBOCK_SD_IRQ, data);
+	del_timer_sync(&mmc_timer);
 }
 
 static struct pxamci_platform_data lubbock_mci_platform_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.detect_delay	= 1,
 	.init 		= lubbock_mci_init,
+	.get_ro		= lubbock_mci_get_ro,
+	.exit 		= lubbock_mci_exit,
+};
+
+static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (mode & IR_SIRMODE) {
+		LUB_MISC_WR &= ~(1 << 4);
+	} else if (mode & IR_FIRMODE) {
+		LUB_MISC_WR |= 1 << 4;
+	}
+	local_irq_restore(flags);
+}
+
+static struct pxaficp_platform_data lubbock_ficp_platform_data = {
+	.transceiver_cap  = IR_SIRMODE | IR_FIRMODE,
+	.transceiver_mode = lubbock_irda_transceiver_mode,
 };
 
 static void __init lubbock_init(void)
 {
+	int flashboot = (LUB_CONF_SWITCHES & 1);
+
 	pxa_set_udc_info(&udc_info);
 	set_pxa_fb_info(&sharp_lm8v31);
 	pxa_set_mci_info(&lubbock_mci_platform_data);
+	pxa_set_ficp_info(&lubbock_ficp_platform_data);
+
+	lubbock_flash_data[0].width = lubbock_flash_data[1].width =
+		(BOOT_DEF & 1) ? 2 : 4;
+	/* Compensate for the nROMBT switch which swaps the flash banks */
+	printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
+	       flashboot?"Flash":"ROM", flashboot);
+
+	lubbock_flash_data[flashboot^1].name = "application-flash";
+	lubbock_flash_data[flashboot].name = "boot-rom";
 	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
 static struct map_desc lubbock_io_desc[] __initdata = {
-  { LUBBOCK_FPGA_VIRT, LUBBOCK_FPGA_PHYS, 0x00100000, MT_DEVICE }, /* CPLD */
+  	{	/* CPLD */
+		.virtual	=  LUBBOCK_FPGA_VIRT,
+		.pfn		= __phys_to_pfn(LUBBOCK_FPGA_PHYS),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init lubbock_map_io(void)
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 85fdb5b1470a..07892f4012d8 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -14,12 +14,15 @@
  */
 
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 #include <linux/bitops.h>
 #include <linux/fb.h>
+#include <linux/ioport.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -27,16 +30,19 @@
 #include <asm/mach-types.h>
 #include <asm/hardware.h>
 #include <asm/irq.h>
+#include <asm/sizes.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
 
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/mainstone.h>
 #include <asm/arch/audio.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/mmc.h>
+#include <asm/arch/irda.h>
 
 #include "generic.h"
 
@@ -189,6 +195,69 @@ static struct platform_device mst_audio_device = {
 	.dev		= { .platform_data = &mst_audio_ops },
 };
 
+static struct resource flash_resources[] = {
+	[0] = {
+		.start	= PXA_CS0_PHYS,
+		.end	= PXA_CS0_PHYS + SZ_64M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PXA_CS1_PHYS,
+		.end	= PXA_CS1_PHYS + SZ_64M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct mtd_partition mainstoneflash0_partitions[] = {
+	{
+		.name =		"Bootloader",
+		.size =		0x00040000,
+		.offset =	0,
+		.mask_flags =	MTD_WRITEABLE  /* force read-only */
+	},{
+		.name =		"Kernel",
+		.size =		0x00400000,
+		.offset =	0x00040000,
+	},{
+		.name =		"Filesystem",
+		.size =		MTDPART_SIZ_FULL,
+		.offset =	0x00440000
+	}
+};
+
+static struct flash_platform_data mst_flash_data[2] = {
+	{
+		.map_name	= "cfi_probe",
+		.parts		= mainstoneflash0_partitions,
+		.nr_parts	= ARRAY_SIZE(mainstoneflash0_partitions),
+	}, {
+		.map_name	= "cfi_probe",
+		.parts		= NULL,
+		.nr_parts	= 0,
+	}
+};
+
+static struct platform_device mst_flash_device[2] = {
+	{
+		.name		= "pxa2xx-flash",
+		.id		= 0,
+		.dev = {
+			.platform_data = &mst_flash_data[0],
+		},
+		.resource = &flash_resources[0],
+		.num_resources = 1,
+	},
+	{
+		.name		= "pxa2xx-flash",
+		.id		= 1,
+		.dev = {
+			.platform_data = &mst_flash_data[1],
+		},
+		.resource = &flash_resources[1],
+		.num_resources = 1,
+	},
+};
+
 static void mainstone_backlight_power(int on)
 {
 	if (on) {
@@ -294,16 +363,57 @@ static struct pxamci_platform_data mainstone_mci_platform_data = {
 	.exit		= mainstone_mci_exit,
 };
 
+static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (mode & IR_SIRMODE) {
+		MST_MSCWR1 &= ~MST_MSCWR1_IRDA_FIR;
+	} else if (mode & IR_FIRMODE) {
+		MST_MSCWR1 |= MST_MSCWR1_IRDA_FIR;
+	}
+	if (mode & IR_OFF) {
+		MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_OFF;
+	} else {
+		MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_FULL;
+	}
+	local_irq_restore(flags);
+}
+
+static struct pxaficp_platform_data mainstone_ficp_platform_data = {
+	.transceiver_cap  = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+	.transceiver_mode = mainstone_irda_transceiver_mode,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&smc91x_device,
+	&mst_audio_device,
+	&mst_flash_device[0],
+	&mst_flash_device[1],
+};
+
 static void __init mainstone_init(void)
 {
+	int SW7 = 0;  /* FIXME: get from SCR (Mst doc section 3.2.1.1) */
+
+	mst_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
+	mst_flash_data[1].width = 4;
+
+	/* Compensate for SW7 which swaps the flash banks */
+	mst_flash_data[SW7].name = "processor-flash";
+	mst_flash_data[SW7 ^ 1].name = "mainboard-flash";
+
+	printk(KERN_NOTICE "Mainstone configured to boot from %s\n",
+	       mst_flash_data[0].name);
+
 	/*
 	 * On Mainstone, we route AC97_SYSCLK via GPIO45 to
 	 * the audio daughter card
 	 */
 	pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD);
 
-	platform_device_register(&smc91x_device);
-	platform_device_register(&mst_audio_device);
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 	/* reading Mainstone's "Virtual Configuration Register"
 	   might be handy to select LCD type here */
@@ -313,11 +423,17 @@ static void __init mainstone_init(void)
 		set_pxa_fb_info(&toshiba_ltm035a776c);
 
 	pxa_set_mci_info(&mainstone_mci_platform_data);
+	pxa_set_ficp_info(&mainstone_ficp_platform_data);
 }
 
 
 static struct map_desc mainstone_io_desc[] __initdata = {
-  { MST_FPGA_VIRT, MST_FPGA_PHYS, 0x00100000, MT_DEVICE }, /* CPLD */
+  	{	/* CPLD */
+		.virtual	=  MST_FPGA_VIRT,
+		.pfn		= __phys_to_pfn(MST_FPGA_PHYS),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init mainstone_map_io(void)
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index ac4dd4336160..f74b9af112dc 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -12,6 +12,7 @@
  */
 #include <linux/config.h>
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/suspend.h>
 #include <linux/errno.h>
 #include <linux/time.h>
@@ -19,6 +20,7 @@
 #include <asm/hardware.h>
 #include <asm/memory.h>
 #include <asm/system.h>
+#include <asm/arch/pm.h>
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/lubbock.h>
 #include <asm/mach/time.h>
@@ -72,7 +74,7 @@ enum {	SLEEP_SAVE_START = 0,
 };
 
 
-static int pxa_pm_enter(suspend_state_t state)
+int pxa_pm_enter(suspend_state_t state)
 {
 	unsigned long sleep_save[SLEEP_SAVE_SIZE];
 	unsigned long checksum = 0;
@@ -191,6 +193,8 @@ static int pxa_pm_enter(suspend_state_t state)
 	return 0;
 }
 
+EXPORT_SYMBOL_GPL(pxa_pm_enter);
+
 unsigned long sleep_phys_sp(void *sp)
 {
 	return virt_to_phys(sp);
@@ -199,21 +203,25 @@ unsigned long sleep_phys_sp(void *sp)
 /*
  * Called after processes are frozen, but before we shut down devices.
  */
-static int pxa_pm_prepare(suspend_state_t state)
+int pxa_pm_prepare(suspend_state_t state)
 {
 	extern int pxa_cpu_pm_prepare(suspend_state_t state);
 
 	return pxa_cpu_pm_prepare(state);
 }
 
+EXPORT_SYMBOL_GPL(pxa_pm_prepare);
+
 /*
  * Called after devices are re-setup, but before processes are thawed.
  */
-static int pxa_pm_finish(suspend_state_t state)
+int pxa_pm_finish(suspend_state_t state)
 {
 	return 0;
 }
 
+EXPORT_SYMBOL_GPL(pxa_pm_finish);
+
 /*
  * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk.
  */
@@ -230,4 +238,4 @@ static int __init pxa_pm_init(void)
 	return 0;
 }
 
-late_initcall(pxa_pm_init);
+device_initcall(pxa_pm_init);
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index f25638810017..eef3de26ad37 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -16,7 +16,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/fb.h>
 
 #include <asm/hardware.h>
@@ -32,6 +32,7 @@
 #include <asm/arch/irq.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/udc.h>
+#include <asm/arch/irda.h>
 #include <asm/arch/poodle.h>
 #include <asm/arch/pxafb.h>
 
@@ -64,6 +65,27 @@ struct platform_device poodle_scoop_device = {
 	.resource	= poodle_scoop_resources,
 };
 
+static void poodle_pcmcia_init(void)
+{
+	/* Setup default state of GPIO outputs
+	   before we enable them as outputs. */
+	GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
+		GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
+		GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
+		GPIO_bit(GPIO53_nPCE_2);
+
+	pxa_gpio_mode(GPIO48_nPOE_MD);
+	pxa_gpio_mode(GPIO49_nPWE_MD);
+	pxa_gpio_mode(GPIO50_nPIOR_MD);
+	pxa_gpio_mode(GPIO51_nPIOW_MD);
+	pxa_gpio_mode(GPIO55_nPREG_MD);
+	pxa_gpio_mode(GPIO56_nPWAIT_MD);
+	pxa_gpio_mode(GPIO57_nIOIS16_MD);
+	pxa_gpio_mode(GPIO52_nPCE_1_MD);
+	pxa_gpio_mode(GPIO53_nPCE_2_MD);
+	pxa_gpio_mode(GPIO54_pSKTSEL_MD);
+}
+
 static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = {
 {
 	.dev        = &poodle_scoop_device.dev,
@@ -73,6 +95,14 @@ static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = {
 },
 };
 
+static struct scoop_pcmcia_config poodle_pcmcia_config = {
+	.devs         = &poodle_pcmcia_scoop[0],
+	.num_devs     = 1,
+	.pcmcia_init  = poodle_pcmcia_init,
+};
+
+EXPORT_SYMBOL(poodle_scoop_device);
+
 
 /* LoCoMo device */
 static struct resource locomo_resources[] = {
@@ -152,6 +182,24 @@ static struct pxamci_platform_data poodle_mci_platform_data = {
 
 
 /*
+ * Irda
+ */
+static void poodle_irda_transceiver_mode(struct device *dev, int mode)
+{
+	if (mode & IR_OFF) {
+		GPSR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON);
+	} else {
+		GPCR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON);
+	}
+}
+
+static struct pxaficp_platform_data poodle_ficp_platform_data = {
+	.transceiver_cap  = IR_SIRMODE | IR_OFF,
+	.transceiver_mode = poodle_irda_transceiver_mode,
+};
+
+
+/*
  * USB Device Controller
  */
 static void poodle_udc_command(int cmd)
@@ -244,11 +292,12 @@ static void __init poodle_init(void)
 
 	set_pxa_fb_info(&poodle_fb_info);
 	pxa_gpio_mode(POODLE_GPIO_USB_PULLUP | GPIO_OUT);
+	pxa_gpio_mode(POODLE_GPIO_IR_ON | GPIO_OUT);
 	pxa_set_udc_info(&udc_info);
 	pxa_set_mci_info(&poodle_mci_platform_data);
+	pxa_set_ficp_info(&poodle_ficp_platform_data);
 
-	scoop_num = 1;
-	scoop_devs = &poodle_pcmcia_scoop[0];
+	platform_scoop_config = &poodle_pcmcia_config;
 
 	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 	if (ret) {
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 7869c3b4e62f..573a5758e781 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -129,7 +129,7 @@ void pxa_cpu_pm_enter(suspend_state_t state)
 	case PM_SUSPEND_MEM:
 		/* set resume return address */
 		PSPR = virt_to_phys(pxa_cpu_resume);
-		pxa_cpu_suspend(3);
+		pxa_cpu_suspend(PWRMODE_SLEEP);
 		break;
 	}
 }
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 9a791b07118d..c722a9a91fcc 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -16,7 +16,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/pm.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
@@ -157,7 +157,7 @@ void pxa_cpu_pm_enter(suspend_state_t state)
 	case PM_SUSPEND_MEM:
 		/* set resume return address */
 		PSPR = virt_to_phys(pxa_cpu_resume);
-		pxa_cpu_suspend(3);
+		pxa_cpu_suspend(PWRMODE_SLEEP);
 		break;
 	}
 }
diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h
index 3977a77aacdd..b0c40a1d6671 100644
--- a/arch/arm/mach-pxa/sharpsl.h
+++ b/arch/arm/mach-pxa/sharpsl.h
@@ -32,3 +32,90 @@ void corgi_put_hsync(void);
 void spitz_put_hsync(void);
 void corgi_wait_hsync(void);
 void spitz_wait_hsync(void);
+
+/*
+ * SharpSL Battery/PM Driver
+ */
+
+struct sharpsl_charger_machinfo {
+	void (*init)(void);
+	int gpio_acin;
+	int gpio_batfull;
+	int gpio_batlock;
+	int gpio_fatal;
+	int (*status_acin)(void);
+	void (*discharge)(int);
+	void (*discharge1)(int);
+	void (*charge)(int);
+	void (*chargeled)(int);
+	void (*measure_temp)(int);
+	void (*presuspend)(void);
+	void (*postsuspend)(void);
+	unsigned long (*charger_wakeup)(void);
+	int (*should_wakeup)(unsigned int resume_on_alarm);
+	int bat_levels;
+	struct battery_thresh *bat_levels_noac;
+	struct battery_thresh *bat_levels_acin;
+	int status_high_acin;
+	int status_low_acin;
+	int status_high_noac;
+	int status_low_noac;
+};
+
+struct battery_thresh {
+	int voltage;
+	int percentage;
+};
+
+struct battery_stat {
+	int ac_status;         /* APM AC Present/Not Present */
+	int mainbat_status;    /* APM Main Battery Status */
+	int mainbat_percent;   /* Main Battery Percentage Charge */
+	int mainbat_voltage;   /* Main Battery Voltage */
+};
+
+struct sharpsl_pm_status {
+	struct device *dev;
+	struct timer_list ac_timer;
+	struct timer_list chrg_full_timer;
+
+	int charge_mode;
+#define CHRG_ERROR    (-1)
+#define CHRG_OFF      (0)
+#define CHRG_ON       (1)
+#define CHRG_DONE     (2)
+
+	unsigned int flags;
+#define SHARPSL_SUSPENDED       (1 << 0)  /* Device is Suspended */
+#define SHARPSL_ALARM_ACTIVE    (1 << 1)  /* Alarm is for charging event (not user) */
+#define SHARPSL_BL_LIMIT        (1 << 2)  /* Backlight Intensity Limited */
+#define SHARPSL_APM_QUEUED      (1 << 3)  /* APM Event Queued */
+#define SHARPSL_DO_OFFLINE_CHRG (1 << 4)  /* Trigger the offline charger */
+
+	int full_count;
+	unsigned long charge_start_time;
+	struct sharpsl_charger_machinfo *machinfo;
+	struct battery_stat battstat;
+};
+
+extern struct sharpsl_pm_status sharpsl_pm;
+extern struct battery_thresh spitz_battery_levels_acin[];
+extern struct battery_thresh spitz_battery_levels_noac[];
+
+#define READ_GPIO_BIT(x)    (GPLR(x) & GPIO_bit(x))
+
+#define SHARPSL_LED_ERROR  2
+#define SHARPSL_LED_ON     1
+#define SHARPSL_LED_OFF    0
+
+#define CHARGE_ON()         sharpsl_pm.machinfo->charge(1)
+#define CHARGE_OFF()        sharpsl_pm.machinfo->charge(0)
+#define CHARGE_LED_ON()     sharpsl_pm.machinfo->chargeled(SHARPSL_LED_ON)
+#define CHARGE_LED_OFF()    sharpsl_pm.machinfo->chargeled(SHARPSL_LED_OFF)
+#define CHARGE_LED_ERR()    sharpsl_pm.machinfo->chargeled(SHARPSL_LED_ERROR)
+#define DISCHARGE_ON()      sharpsl_pm.machinfo->discharge(1)
+#define DISCHARGE_OFF()     sharpsl_pm.machinfo->discharge(0)
+#define STATUS_AC_IN()      sharpsl_pm.machinfo->status_acin()
+#define STATUS_BATT_LOCKED()  READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock)
+#define STATUS_CHRG_FULL()  READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull)
+#define STATUS_FATAL()      READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal)
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
new file mode 100644
index 000000000000..c10be00fb526
--- /dev/null
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -0,0 +1,997 @@
+/*
+ * Battery and Power Management code for the Sharp SL-C7xx and SL-Cxx00
+ * series of PDAs
+ *
+ * Copyright (c) 2004-2005 Richard Purdie
+ *
+ * Based on code written by Sharp for 2.4 kernels
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#undef DEBUG
+
+#include <linux/module.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/apm_bios.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/hardware/scoop.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/apm.h>
+
+#include <asm/arch/pm.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/sharpsl.h>
+#include "sharpsl.h"
+
+/*
+ * Constants
+ */
+#define SHARPSL_CHARGE_ON_TIME_INTERVAL        (msecs_to_jiffies(1*60*1000))  /* 1 min */
+#define SHARPSL_CHARGE_FINISH_TIME             (msecs_to_jiffies(10*60*1000)) /* 10 min */
+#define SHARPSL_BATCHK_TIME                    (msecs_to_jiffies(15*1000))    /* 15 sec */
+#define SHARPSL_BATCHK_TIME_SUSPEND            (60*10)                        /* 10 min */
+#define SHARPSL_WAIT_CO_TIME                   15  /* 15 sec */
+#define SHARPSL_WAIT_DISCHARGE_ON              100 /* 100 msec */
+#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP   10  /* 10 msec */
+#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT   10  /* 10 msec */
+#define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN   10  /* 10 msec */
+#define SHARPSL_CHARGE_WAIT_TIME               15  /* 15 msec */
+#define SHARPSL_CHARGE_CO_CHECK_TIME           5   /* 5 msec */
+#define SHARPSL_CHARGE_RETRY_CNT               1   /* eqv. 10 min */
+
+#define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
+#define SHARPSL_CHARGE_ON_TEMP         0xe0  /* 2.9V */
+#define SHARPSL_CHARGE_ON_ACIN_HIGH    0x9b  /* 6V */
+#define SHARPSL_CHARGE_ON_ACIN_LOW     0x34  /* 2V */
+#define SHARPSL_FATAL_ACIN_VOLT        182   /* 3.45V */
+#define SHARPSL_FATAL_NOACIN_VOLT      170   /* 3.40V */
+
+struct battery_thresh spitz_battery_levels_acin[] = {
+	{ 213, 100},
+	{ 212,  98},
+	{ 211,  95},
+	{ 210,  93},
+	{ 209,  90},
+	{ 208,  88},
+	{ 207,  85},
+	{ 206,  83},
+	{ 205,  80},
+	{ 204,  78},
+	{ 203,  75},
+	{ 202,  73},
+	{ 201,  70},
+	{ 200,  68},
+	{ 199,  65},
+	{ 198,  63},
+	{ 197,  60},
+	{ 196,  58},
+	{ 195,  55},
+	{ 194,  53},
+	{ 193,  50},
+	{ 192,  48},
+	{ 192,  45},
+	{ 191,  43},
+	{ 191,  40},
+	{ 190,  38},
+	{ 190,  35},
+	{ 189,  33},
+	{ 188,  30},
+	{ 187,  28},
+	{ 186,  25},
+	{ 185,  23},
+	{ 184,  20},
+	{ 183,  18},
+	{ 182,  15},
+	{ 181,  13},
+	{ 180,  10},
+	{ 179,   8},
+	{ 178,   5},
+	{   0,   0},
+};
+
+struct battery_thresh  spitz_battery_levels_noac[] = {
+	{ 213, 100},
+	{ 212,  98},
+	{ 211,  95},
+	{ 210,  93},
+	{ 209,  90},
+	{ 208,  88},
+	{ 207,  85},
+	{ 206,  83},
+	{ 205,  80},
+	{ 204,  78},
+	{ 203,  75},
+	{ 202,  73},
+	{ 201,  70},
+	{ 200,  68},
+	{ 199,  65},
+	{ 198,  63},
+	{ 197,  60},
+	{ 196,  58},
+	{ 195,  55},
+	{ 194,  53},
+	{ 193,  50},
+	{ 192,  48},
+	{ 191,  45},
+	{ 190,  43},
+	{ 189,  40},
+	{ 188,  38},
+	{ 187,  35},
+	{ 186,  33},
+	{ 185,  30},
+	{ 184,  28},
+	{ 183,  25},
+	{ 182,  23},
+	{ 181,  20},
+	{ 180,  18},
+	{ 179,  15},
+	{ 178,  13},
+	{ 177,  10},
+	{ 176,   8},
+	{ 175,   5},
+	{   0,   0},
+};
+
+/* MAX1111 Commands */
+#define MAXCTRL_PD0      1u << 0
+#define MAXCTRL_PD1      1u << 1
+#define MAXCTRL_SGL      1u << 2
+#define MAXCTRL_UNI      1u << 3
+#define MAXCTRL_SEL_SH   4
+#define MAXCTRL_STR      1u << 7
+
+/* MAX1111 Channel Definitions */
+#define BATT_AD    4u
+#define BATT_THM   2u
+#define JK_VAD     6u
+
+
+/*
+ * Prototypes
+ */
+static int sharpsl_read_main_battery(void);
+static int sharpsl_off_charge_battery(void);
+static int sharpsl_check_battery_temp(void);
+static int sharpsl_check_battery_voltage(void);
+static int sharpsl_ac_check(void);
+static int sharpsl_fatal_check(void);
+static int sharpsl_average_value(int ad);
+static void sharpsl_average_clear(void);
+static void sharpsl_charge_toggle(void *private_);
+static void sharpsl_battery_thread(void *private_);
+
+
+/*
+ * Variables
+ */
+struct sharpsl_pm_status sharpsl_pm;
+DECLARE_WORK(toggle_charger, sharpsl_charge_toggle, NULL);
+DECLARE_WORK(sharpsl_bat, sharpsl_battery_thread, NULL);
+
+
+static int get_percentage(int voltage)
+{
+	int i = sharpsl_pm.machinfo->bat_levels - 1;
+	struct battery_thresh *thresh;
+
+	if (sharpsl_pm.charge_mode == CHRG_ON)
+		thresh=sharpsl_pm.machinfo->bat_levels_acin;
+	else
+		thresh=sharpsl_pm.machinfo->bat_levels_noac;
+
+	while (i > 0 && (voltage > thresh[i].voltage))
+		i--;
+
+	return thresh[i].percentage;
+}
+
+static int get_apm_status(int voltage)
+{
+	int low_thresh, high_thresh;
+
+	if (sharpsl_pm.charge_mode == CHRG_ON) {
+		high_thresh = sharpsl_pm.machinfo->status_high_acin;
+		low_thresh = sharpsl_pm.machinfo->status_low_acin;
+	} else {
+		high_thresh = sharpsl_pm.machinfo->status_high_noac;
+		low_thresh = sharpsl_pm.machinfo->status_low_noac;
+	}
+
+	if (voltage >= high_thresh)
+		return APM_BATTERY_STATUS_HIGH;
+	if (voltage >= low_thresh)
+		return APM_BATTERY_STATUS_LOW;
+	return APM_BATTERY_STATUS_CRITICAL;
+}
+
+void sharpsl_battery_kick(void)
+{
+	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
+}
+EXPORT_SYMBOL(sharpsl_battery_kick);
+
+
+static void sharpsl_battery_thread(void *private_)
+{
+	int voltage, percent, apm_status, i = 0;
+
+	if (!sharpsl_pm.machinfo)
+		return;
+
+	sharpsl_pm.battstat.ac_status = (STATUS_AC_IN() ? APM_AC_ONLINE : APM_AC_OFFLINE);
+
+	/* Corgi cannot confirm when battery fully charged so periodically kick! */
+	if (machine_is_corgi() && (sharpsl_pm.charge_mode == CHRG_ON)
+			&& time_after(jiffies, sharpsl_pm.charge_start_time +  SHARPSL_CHARGE_ON_TIME_INTERVAL))
+		schedule_work(&toggle_charger);
+
+	while(1) {
+		voltage = sharpsl_read_main_battery();
+		if (voltage > 0) break;
+		if (i++ > 5) {
+			voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
+			dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
+			break;
+		}
+	}
+
+	voltage = sharpsl_average_value(voltage);
+	apm_status = get_apm_status(voltage);
+	percent = get_percentage(voltage);
+
+	/* At low battery voltages, the voltage has a tendency to start
+           creeping back up so we try to avoid this here */
+	if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) ||  percent <= sharpsl_pm.battstat.mainbat_percent) {
+		sharpsl_pm.battstat.mainbat_voltage = voltage;
+		sharpsl_pm.battstat.mainbat_status = apm_status;
+		sharpsl_pm.battstat.mainbat_percent = percent;
+	}
+
+	dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %d\n", voltage,
+			sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
+
+	/* If battery is low. limit backlight intensity to save power. */
+	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
+			&& ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
+			(sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
+		if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
+			corgibl_limit_intensity(1);
+			sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
+		}
+	} else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) {
+		corgibl_limit_intensity(0);
+		sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;
+	}
+
+	/* Suspend if critical battery level */
+	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
+			&& (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
+			&& !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
+		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
+		dev_err(sharpsl_pm.dev, "Fatal Off\n");
+		apm_queue_event(APM_CRITICAL_SUSPEND);
+	}
+
+	schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME);
+}
+
+static void sharpsl_charge_on(void)
+{
+	dev_dbg(sharpsl_pm.dev, "Turning Charger On\n");
+
+	sharpsl_pm.full_count = 0;
+	sharpsl_pm.charge_mode = CHRG_ON;
+	schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250));
+	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500));
+}
+
+static void sharpsl_charge_off(void)
+{
+	dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n");
+
+	CHARGE_OFF();
+	CHARGE_LED_OFF();
+	sharpsl_pm.charge_mode = CHRG_OFF;
+
+	schedule_work(&sharpsl_bat);
+}
+
+static void sharpsl_charge_error(void)
+{
+	CHARGE_LED_ERR();
+	CHARGE_OFF();
+	sharpsl_pm.charge_mode = CHRG_ERROR;
+}
+
+static void sharpsl_charge_toggle(void *private_)
+{
+	dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies);
+
+	if (STATUS_AC_IN() == 0) {
+		sharpsl_charge_off();
+		return;
+	} else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) {
+		sharpsl_charge_error();
+		return;
+	}
+
+	CHARGE_LED_ON();
+	CHARGE_OFF();
+	mdelay(SHARPSL_CHARGE_WAIT_TIME);
+	CHARGE_ON();
+
+	sharpsl_pm.charge_start_time = jiffies;
+}
+
+static void sharpsl_ac_timer(unsigned long data)
+{
+	int acin = STATUS_AC_IN();
+
+	dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin);
+
+	sharpsl_average_clear();
+	if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
+		sharpsl_charge_on();
+	else if (sharpsl_pm.charge_mode == CHRG_ON)
+		sharpsl_charge_off();
+
+	schedule_work(&sharpsl_bat);
+}
+
+
+static irqreturn_t sharpsl_ac_isr(int irq, void *dev_id, struct pt_regs *fp)
+{
+	/* Delay the event slightly to debounce */
+	/* Must be a smaller delay than the chrg_full_isr below */
+	mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
+
+	return IRQ_HANDLED;
+}
+
+static void sharpsl_chrg_full_timer(unsigned long data)
+{
+	dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies);
+
+	sharpsl_pm.full_count++;
+
+	if (STATUS_AC_IN() == 0) {
+		dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n");
+		if (sharpsl_pm.charge_mode == CHRG_ON)
+			sharpsl_charge_off();
+	} else if (sharpsl_pm.full_count < 2) {
+		dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n");
+		schedule_work(&toggle_charger);
+	} else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) {
+		dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n");
+		schedule_work(&toggle_charger);
+	} else {
+		sharpsl_charge_off();
+		sharpsl_pm.charge_mode = CHRG_DONE;
+		dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n");
+	}
+}
+
+/* Charging Finished Interrupt (Not present on Corgi) */
+/* Can trigger at the same time as an AC staus change so
+   delay until after that has been processed */
+static irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id, struct pt_regs *fp)
+{
+	if (sharpsl_pm.flags & SHARPSL_SUSPENDED)
+		return IRQ_HANDLED;
+
+	/* delay until after any ac interrupt */
+	mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500));
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id, struct pt_regs *fp)
+{
+	int is_fatal = 0;
+
+	if (STATUS_BATT_LOCKED() == 0) {
+		dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n");
+		is_fatal = 1;
+	}
+
+	if (sharpsl_pm.machinfo->gpio_fatal && (STATUS_FATAL() == 0)) {
+		dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n");
+		is_fatal = 1;
+	}
+
+	if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) {
+		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
+		apm_queue_event(APM_CRITICAL_SUSPEND);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Maintain an average of the last 10 readings
+ */
+#define SHARPSL_CNV_VALUE_NUM    10
+static int sharpsl_ad_index;
+
+static void sharpsl_average_clear(void)
+{
+	sharpsl_ad_index = 0;
+}
+
+static int sharpsl_average_value(int ad)
+{
+	int i, ad_val = 0;
+	static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1];
+
+	if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) {
+		sharpsl_ad_index = 0;
+		return ad;
+	}
+
+	sharpsl_ad[sharpsl_ad_index] = ad;
+	sharpsl_ad_index++;
+	if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
+		for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
+			sharpsl_ad[i] = sharpsl_ad[i+1];
+		sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
+	}
+	for (i=0; i < sharpsl_ad_index; i++)
+		ad_val += sharpsl_ad[i];
+
+	return (ad_val / sharpsl_ad_index);
+}
+
+
+/*
+ * Read MAX1111 ADC
+ */
+static int read_max1111(int channel)
+{
+	return corgi_ssp_max1111_get((channel << MAXCTRL_SEL_SH) | MAXCTRL_PD0 | MAXCTRL_PD1
+			| MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR);
+}
+
+static int sharpsl_read_main_battery(void)
+{
+	return read_max1111(BATT_AD);
+}
+
+static int sharpsl_read_temp(void)
+{
+	int temp;
+
+	sharpsl_pm.machinfo->measure_temp(1);
+
+	mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
+	temp = read_max1111(BATT_THM);
+
+	sharpsl_pm.machinfo->measure_temp(0);
+
+	return temp;
+}
+
+static int sharpsl_read_acin(void)
+{
+	return read_max1111(JK_VAD);
+}
+
+/*
+ * Take an array of 5 integers, remove the maximum and minimum values
+ * and return the average.
+ */
+static int get_select_val(int *val)
+{
+	int i, j, k, temp, sum = 0;
+
+	/* Find MAX val */
+	temp = val[0];
+	j=0;
+	for (i=1; i<5; i++) {
+		if (temp < val[i]) {
+			temp = val[i];
+			j = i;
+		}
+	}
+
+	/* Find MIN val */
+	temp = val[4];
+	k=4;
+	for (i=3; i>=0; i--) {
+		if (temp > val[i]) {
+			temp = val[i];
+			k = i;
+		}
+	}
+
+	for (i=0; i<5; i++)
+		if (i != j && i != k )
+			sum += val[i];
+
+	dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
+
+	return (sum/3);
+}
+
+static int sharpsl_check_battery_temp(void)
+{
+	int val, i, buff[5];
+
+	/* Check battery temperature */
+	for (i=0; i<5; i++) {
+		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
+		buff[i] = sharpsl_read_temp();
+	}
+
+	val = get_select_val(buff);
+
+	dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
+	if (val > SHARPSL_CHARGE_ON_TEMP)
+		return -1;
+
+	return 0;
+}
+
+static int sharpsl_check_battery_voltage(void)
+{
+	int val, i, buff[5];
+
+	/* disable charge, enable discharge */
+	CHARGE_OFF();
+	DISCHARGE_ON();
+	mdelay(SHARPSL_WAIT_DISCHARGE_ON);
+
+	if (sharpsl_pm.machinfo->discharge1)
+		sharpsl_pm.machinfo->discharge1(1);
+
+	/* Check battery voltage */
+	for (i=0; i<5; i++) {
+		buff[i] = sharpsl_read_main_battery();
+		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
+	}
+
+	if (sharpsl_pm.machinfo->discharge1)
+		sharpsl_pm.machinfo->discharge1(0);
+
+	DISCHARGE_OFF();
+
+	val = get_select_val(buff);
+	dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val);
+
+	if (val < SHARPSL_CHARGE_ON_VOLT)
+		return -1;
+
+	return 0;
+}
+
+static int sharpsl_ac_check(void)
+{
+	int temp, i, buff[5];
+
+	for (i=0; i<5; i++) {
+		buff[i] = sharpsl_read_acin();
+		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
+	}
+
+	temp = get_select_val(buff);
+	dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp);
+
+	if ((temp > SHARPSL_CHARGE_ON_ACIN_HIGH) || (temp < SHARPSL_CHARGE_ON_ACIN_LOW)) {
+		dev_err(sharpsl_pm.dev, "Error: AC check failed.\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	sharpsl_pm.flags |= SHARPSL_SUSPENDED;
+	flush_scheduled_work();
+
+	if (sharpsl_pm.charge_mode == CHRG_ON)
+		sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
+	else
+		sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
+
+	return 0;
+}
+
+static int sharpsl_pm_resume(struct platform_device *pdev)
+{
+	/* Clear the reset source indicators as they break the bootloader upon reboot */
+	RCSR = 0x0f;
+	sharpsl_average_clear();
+	sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED;
+	sharpsl_pm.flags &= ~SHARPSL_SUSPENDED;
+
+	return 0;
+}
+
+static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
+{
+	dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR);
+
+	dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
+	/* not charging and AC-IN! */
+
+	if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (STATUS_AC_IN() != 0)) {
+		dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n");
+		sharpsl_pm.charge_mode = CHRG_OFF;
+		sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
+		sharpsl_off_charge_battery();
+	}
+
+	sharpsl_pm.machinfo->presuspend();
+
+	PEDR = 0xffffffff; /* clear it */
+
+	sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE;
+	if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
+		RTSR &= RTSR_ALE;
+		RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
+		dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR);
+		sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
+	} else if (alarm_enable) {
+		RTSR &= RTSR_ALE;
+		RTAR = alarm_time;
+		dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR);
+	} else {
+		dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
+	}
+
+	pxa_pm_enter(state);
+
+	sharpsl_pm.machinfo->postsuspend();
+
+	dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR);
+}
+
+static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
+{
+	if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) )
+	{
+		if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
+			dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
+			corgi_goto_sleep(alarm_time, alarm_enable, state);
+			return 1;
+		}
+		if(sharpsl_off_charge_battery()) {
+			dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
+			corgi_goto_sleep(alarm_time, alarm_enable, state);
+			return 1;
+		}
+		dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
+	}
+
+	if ((STATUS_BATT_LOCKED() == 0) || (sharpsl_fatal_check() < 0) )
+	{
+		dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
+		corgi_goto_sleep(alarm_time, alarm_enable, state);
+		return 1;
+	}
+
+	return 0;
+}
+
+static int corgi_pxa_pm_enter(suspend_state_t state)
+{
+	unsigned long alarm_time = RTAR;
+	unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0);
+
+	dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n");
+
+	corgi_goto_sleep(alarm_time, alarm_status, state);
+
+	while (corgi_enter_suspend(alarm_time,alarm_status,state))
+		{}
+
+	dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n");
+
+	return 0;
+}
+#endif
+
+
+/*
+ * Check for fatal battery errors
+ * Fatal returns -1
+ */
+static int sharpsl_fatal_check(void)
+{
+	int buff[5], temp, i, acin;
+
+	dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n");
+
+	/* Check AC-Adapter */
+	acin = STATUS_AC_IN();
+
+	if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
+		CHARGE_OFF();
+		udelay(100);
+		DISCHARGE_ON();	/* enable discharge */
+		mdelay(SHARPSL_WAIT_DISCHARGE_ON);
+	}
+
+	if (sharpsl_pm.machinfo->discharge1)
+		sharpsl_pm.machinfo->discharge1(1);
+
+	/* Check battery : check inserting battery ? */
+	for (i=0; i<5; i++) {
+		buff[i] = sharpsl_read_main_battery();
+		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
+	}
+
+	if (sharpsl_pm.machinfo->discharge1)
+		sharpsl_pm.machinfo->discharge1(0);
+
+	if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
+		udelay(100);
+		CHARGE_ON();
+		DISCHARGE_OFF();
+	}
+
+	temp = get_select_val(buff);
+	dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %d\n", acin, temp, sharpsl_read_main_battery());
+
+	if ((acin && (temp < SHARPSL_FATAL_ACIN_VOLT)) ||
+			(!acin && (temp < SHARPSL_FATAL_NOACIN_VOLT)))
+		return -1;
+	return 0;
+}
+
+static int sharpsl_off_charge_error(void)
+{
+	dev_err(sharpsl_pm.dev, "Offline Charger: Error occured.\n");
+	CHARGE_OFF();
+	CHARGE_LED_ERR();
+	sharpsl_pm.charge_mode = CHRG_ERROR;
+	return 1;
+}
+
+/*
+ * Charging Control while suspended
+ * Return 1 - go straight to sleep
+ * Return 0 - sleep or wakeup depending on other factors
+ */
+static int sharpsl_off_charge_battery(void)
+{
+	int time;
+
+	dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode);
+
+	if (sharpsl_pm.charge_mode == CHRG_OFF) {
+		dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n");
+
+		/* AC Check */
+		if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0))
+			return sharpsl_off_charge_error();
+
+		/* Start Charging */
+		CHARGE_LED_ON();
+		CHARGE_OFF();
+		mdelay(SHARPSL_CHARGE_WAIT_TIME);
+		CHARGE_ON();
+
+		sharpsl_pm.charge_mode = CHRG_ON;
+		sharpsl_pm.full_count = 0;
+
+		return 1;
+	} else if (sharpsl_pm.charge_mode != CHRG_ON) {
+		return 1;
+	}
+
+	if (sharpsl_pm.full_count == 0) {
+		int time;
+
+		dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n");
+
+		if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0))
+			return sharpsl_off_charge_error();
+
+		CHARGE_OFF();
+		mdelay(SHARPSL_CHARGE_WAIT_TIME);
+		CHARGE_ON();
+		sharpsl_pm.charge_mode = CHRG_ON;
+
+		mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
+
+		time = RCNR;
+		while(1) {
+			/* Check if any wakeup event had occured */
+			if (sharpsl_pm.machinfo->charger_wakeup() != 0)
+				return 0;
+			/* Check for timeout */
+			if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
+				return 1;
+			if (STATUS_CHRG_FULL()) {
+				dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occured. Retrying to check\n");
+	   			sharpsl_pm.full_count++;
+				CHARGE_OFF();
+				mdelay(SHARPSL_CHARGE_WAIT_TIME);
+				CHARGE_ON();
+				return 1;
+			}
+		}
+	}
+
+	dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n");
+
+	mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
+
+	time = RCNR;
+	while(1) {
+		/* Check if any wakeup event had occured */
+		if (sharpsl_pm.machinfo->charger_wakeup() != 0)
+			return 0;
+		/* Check for timeout */
+		if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
+			if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) {
+				dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n");
+				sharpsl_pm.full_count = 0;
+			}
+			sharpsl_pm.full_count++;
+			return 1;
+		}
+		if (STATUS_CHRG_FULL()) {
+			dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n");
+			CHARGE_LED_OFF();
+			CHARGE_OFF();
+			sharpsl_pm.charge_mode = CHRG_DONE;
+			return 1;
+		}
+	}
+}
+
+
+static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent);
+}
+
+static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage);
+}
+
+static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL);
+static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL);
+
+extern void (*apm_get_power_status)(struct apm_power_info *);
+
+static void sharpsl_apm_get_power_status(struct apm_power_info *info)
+{
+	info->ac_line_status = sharpsl_pm.battstat.ac_status;
+
+	if (sharpsl_pm.charge_mode == CHRG_ON)
+		info->battery_status = APM_BATTERY_STATUS_CHARGING;
+	else
+		info->battery_status = sharpsl_pm.battstat.mainbat_status;
+
+	info->battery_flag = (1 << info->battery_status);
+	info->battery_life = sharpsl_pm.battstat.mainbat_percent;
+}
+
+static struct pm_ops sharpsl_pm_ops = {
+	.pm_disk_mode	= PM_DISK_FIRMWARE,
+	.prepare	= pxa_pm_prepare,
+	.enter		= corgi_pxa_pm_enter,
+	.finish		= pxa_pm_finish,
+};
+
+static int __init sharpsl_pm_probe(struct platform_device *pdev)
+{
+	if (!pdev->dev.platform_data)
+		return -EINVAL;
+
+	sharpsl_pm.dev = &pdev->dev;
+	sharpsl_pm.machinfo = pdev->dev.platform_data;
+	sharpsl_pm.charge_mode = CHRG_OFF;
+	sharpsl_pm.flags = 0;
+
+	sharpsl_pm.machinfo->init();
+
+	init_timer(&sharpsl_pm.ac_timer);
+	sharpsl_pm.ac_timer.function = sharpsl_ac_timer;
+
+	init_timer(&sharpsl_pm.chrg_full_timer);
+	sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer;
+
+	pxa_gpio_mode(sharpsl_pm.machinfo->gpio_acin | GPIO_IN);
+	pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batfull | GPIO_IN);
+	pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batlock | GPIO_IN);
+
+	/* Register interrupt handlers */
+	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, SA_INTERRUPT, "AC Input Detect", sharpsl_ac_isr)) {
+		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin));
+	}
+	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQT_BOTHEDGE);
+
+	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, SA_INTERRUPT, "Battery Cover", sharpsl_fatal_isr)) {
+		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock));
+	}
+	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQT_FALLING);
+
+	if (sharpsl_pm.machinfo->gpio_fatal) {
+		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, SA_INTERRUPT, "Fatal Battery", sharpsl_fatal_isr)) {
+			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal));
+		}
+		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQT_FALLING);
+	}
+
+	if (!machine_is_corgi())
+	{
+		/* Register interrupt handler. */
+		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, SA_INTERRUPT, "CO", sharpsl_chrg_full_isr)) {
+			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull));
+		}
+		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQT_RISING);
+	}
+
+	device_create_file(&pdev->dev, &dev_attr_battery_percentage);
+	device_create_file(&pdev->dev, &dev_attr_battery_voltage);
+
+	apm_get_power_status = sharpsl_apm_get_power_status;
+
+	pm_set_ops(&sharpsl_pm_ops);
+
+	mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
+
+	return 0;
+}
+
+static int sharpsl_pm_remove(struct platform_device *pdev)
+{
+	pm_set_ops(NULL);
+
+	device_remove_file(&pdev->dev, &dev_attr_battery_percentage);
+	device_remove_file(&pdev->dev, &dev_attr_battery_voltage);
+
+	free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
+	free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
+
+	if (sharpsl_pm.machinfo->gpio_fatal)
+		free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr);
+
+	if (!machine_is_corgi())
+		free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
+
+	del_timer_sync(&sharpsl_pm.chrg_full_timer);
+	del_timer_sync(&sharpsl_pm.ac_timer);
+
+	return 0;
+}
+
+static struct platform_driver sharpsl_pm_driver = {
+	.probe		= sharpsl_pm_probe,
+	.remove		= sharpsl_pm_remove,
+	.suspend	= sharpsl_pm_suspend,
+	.resume		= sharpsl_pm_resume,
+	.driver		= {
+		.name		= "sharpsl-pm",
+	},
+};
+
+static int __devinit sharpsl_pm_init(void)
+{
+	return platform_driver_register(&sharpsl_pm_driver);
+}
+
+static void sharpsl_pm_exit(void)
+{
+ 	platform_driver_unregister(&sharpsl_pm_driver);
+}
+
+late_initcall(sharpsl_pm_init);
+module_exit(sharpsl_pm_exit);
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index 5786ccad938c..c9862688ff3d 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -28,7 +28,9 @@
 /*
  * pxa_cpu_suspend()
  *
- * Forces CPU into sleep state
+ * Forces CPU into sleep state.
+ *
+ * r0 = value for PWRMODE M field for desired sleep state
  */
 
 ENTRY(pxa_cpu_suspend)
@@ -53,6 +55,7 @@ ENTRY(pxa_cpu_suspend)
 	mov	r10, sp
 	stmfd	sp!, {r3 - r10}
 
+	mov r5, r0				@ save sleep mode
 	@ preserve phys address of stack
 	mov	r0, sp
 	bl	sleep_phys_sp
@@ -66,7 +69,7 @@ ENTRY(pxa_cpu_suspend)
 	@ (also workaround for sighting 28071)
 
 	@ prepare value for sleep mode
-	mov	r1, #3				@ sleep mode
+	mov	r1, r5				@ sleep mode
 
 	@ prepare pointer to physical address 0 (virtual mapping in generic.c)
 	mov	r2, #UNCACHED_PHYS_0
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 568afe3d6e1a..2df1b56615b1 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -14,7 +14,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/major.h>
 #include <linux/fs.h>
@@ -34,9 +34,9 @@
 
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/irq.h>
+#include <asm/arch/irda.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/udc.h>
-#include <asm/arch/ohci.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/akita.h>
 #include <asm/arch/spitz.h>
@@ -104,6 +104,66 @@ struct platform_device spitzscoop2_device = {
 	.resource	= spitz_scoop2_resources,
 };
 
+#define SPITZ_PWR_SD 0x01
+#define SPITZ_PWR_CF 0x02
+
+/* Power control is shared with between one of the CF slots and SD */
+static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr)
+{
+	unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR);
+
+	if (new_cpr & 0x0007) {
+	        set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
+		if (!(cpr & 0x0002) && !(cpr & 0x0004))
+		        mdelay(5);
+		if (device == SPITZ_PWR_CF)
+		        cpr |= 0x0002;
+		if (device == SPITZ_PWR_SD)
+		        cpr |= 0x0004;
+	        write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
+	} else {
+		if (device == SPITZ_PWR_CF)
+		        cpr &= ~0x0002;
+		if (device == SPITZ_PWR_SD)
+		        cpr &= ~0x0004;
+	        write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
+		if (!(cpr & 0x0002) && !(cpr & 0x0004)) {
+		        mdelay(1);
+		        reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
+		}
+	}
+}
+
+static void spitz_pcmcia_init(void)
+{
+	/* Setup default state of GPIO outputs
+	   before we enable them as outputs. */
+	GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
+		GPIO_bit(GPIO49_nPWE) |	GPIO_bit(GPIO50_nPIOR) |
+		GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO54_nPCE_2);
+	GPSR(GPIO85_nPCE_1) = GPIO_bit(GPIO85_nPCE_1);
+
+	pxa_gpio_mode(GPIO48_nPOE_MD);
+	pxa_gpio_mode(GPIO49_nPWE_MD);
+	pxa_gpio_mode(GPIO50_nPIOR_MD);
+	pxa_gpio_mode(GPIO51_nPIOW_MD);
+	pxa_gpio_mode(GPIO55_nPREG_MD);
+	pxa_gpio_mode(GPIO56_nPWAIT_MD);
+	pxa_gpio_mode(GPIO57_nIOIS16_MD);
+	pxa_gpio_mode(GPIO85_nPCE_1_MD);
+	pxa_gpio_mode(GPIO54_nPCE_2_MD);
+	pxa_gpio_mode(GPIO104_pSKTSEL_MD);
+}
+
+static void spitz_pcmcia_pwr(struct device *scoop, unsigned short cpr, int nr)
+{
+	/* Only need to override behaviour for slot 0 */
+	if (nr == 0)
+		spitz_card_pwr_ctrl(SPITZ_PWR_CF, cpr);
+	else
+		write_scoop_reg(scoop, SCOOP_CPR, cpr);
+}
+
 static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = {
 {
 	.dev        = &spitzscoop_device.dev,
@@ -117,6 +177,16 @@ static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = {
 },
 };
 
+static struct scoop_pcmcia_config spitz_pcmcia_config = {
+	.devs         = &spitz_pcmcia_scoop[0],
+	.num_devs     = 2,
+	.pcmcia_init  = spitz_pcmcia_init,
+	.power_ctrl   = spitz_pcmcia_pwr,
+};
+
+EXPORT_SYMBOL(spitzscoop_device);
+EXPORT_SYMBOL(spitzscoop2_device);
+
 
 /*
  * Spitz SSP Device
@@ -235,27 +305,14 @@ static int spitz_mci_init(struct device *dev, irqreturn_t (*spitz_detect_int)(in
 	return 0;
 }
 
-/* Power control is shared with one of the CF slots so we have a mess */
 static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
 {
 	struct pxamci_platform_data* p_d = dev->platform_data;
 
-	unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR);
-
-	if (( 1 << vdd) & p_d->ocr_mask) {
-		/* printk(KERN_DEBUG "%s: on\n", __FUNCTION__); */
-		set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
-		mdelay(2);
-		write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | 0x04);
-	} else {
-		/* printk(KERN_DEBUG "%s: off\n", __FUNCTION__); */
-		write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr & ~0x04);
-
-		if (!(cpr | 0x02)) {
-			mdelay(1);
-			reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
-		}
-	}
+	if (( 1 << vdd) & p_d->ocr_mask)
+		spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0004);
+	else
+		spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0000);
 }
 
 static int spitz_mci_get_ro(struct device *dev)
@@ -278,6 +335,33 @@ static struct pxamci_platform_data spitz_mci_platform_data = {
 
 
 /*
+ * Irda
+ */
+static void spitz_irda_transceiver_mode(struct device *dev, int mode)
+{
+	if (mode & IR_OFF)
+		set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
+	else
+		reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
+}
+
+#ifdef CONFIG_MACH_AKITA
+static void akita_irda_transceiver_mode(struct device *dev, int mode)
+{
+	if (mode & IR_OFF)
+		akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON);
+	else
+		akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON);
+}
+#endif
+
+static struct pxaficp_platform_data spitz_ficp_platform_data = {
+	.transceiver_cap  = IR_SIRMODE | IR_OFF,
+	.transceiver_mode = spitz_irda_transceiver_mode,
+};
+
+
+/*
  * Spitz PXA Framebuffer
  */
 static struct pxafb_mach_info spitz_pxafb_info __initdata = {
@@ -304,7 +388,6 @@ static struct platform_device *devices[] __initdata = {
 	&spitzkbd_device,
 	&spitzts_device,
 	&spitzbl_device,
-	&spitzbattery_device,
 };
 
 static void __init common_init(void)
@@ -328,14 +411,15 @@ static void __init common_init(void)
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	pxa_set_mci_info(&spitz_mci_platform_data);
-	pxafb_device.dev.parent = &spitzssp_device.dev;
+	pxa_set_ficp_info(&spitz_ficp_platform_data);
+	set_pxa_fb_parent(&spitzssp_device.dev);
 	set_pxa_fb_info(&spitz_pxafb_info);
 }
 
 static void __init spitz_init(void)
 {
-	scoop_num = 2;
-	scoop_devs = &spitz_pcmcia_scoop[0];
+	platform_scoop_config = &spitz_pcmcia_config;
+
 	spitz_bl_machinfo.set_bl_intensity = spitz_bl_set_intensity;
 
 	common_init();
@@ -343,6 +427,32 @@ static void __init spitz_init(void)
 	platform_device_register(&spitzscoop2_device);
 }
 
+#ifdef CONFIG_MACH_AKITA
+/*
+ * Akita IO Expander
+ */
+struct platform_device akitaioexp_device = {
+	.name		= "akita-ioexp",
+	.id		= -1,
+};
+
+static void __init akita_init(void)
+{
+	spitz_ficp_platform_data.transceiver_mode = akita_irda_transceiver_mode;
+
+	/* We just pretend the second element of the array doesn't exist */
+	spitz_pcmcia_config.num_devs = 1;
+	platform_scoop_config = &spitz_pcmcia_config;
+	spitz_bl_machinfo.set_bl_intensity = akita_bl_set_intensity;
+
+	platform_device_register(&akitaioexp_device);
+
+	spitzscoop_device.dev.parent = &akitaioexp_device.dev;
+	common_init();
+}
+#endif
+
+
 static void __init fixup_spitz(struct machine_desc *desc,
 		struct tag *tags, char **cmdline, struct meminfo *mi)
 {
@@ -378,3 +488,16 @@ MACHINE_START(BORZOI, "SHARP Borzoi")
 	.timer		= &pxa_timer,
 MACHINE_END
 #endif
+
+#ifdef CONFIG_MACH_AKITA
+MACHINE_START(AKITA, "SHARP Akita")
+	.phys_ram	= 0xa0000000,
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup		= fixup_spitz,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa_init_irq,
+	.init_machine	= akita_init,
+	.timer		= &pxa_timer,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
new file mode 100644
index 000000000000..3ce7486daa51
--- /dev/null
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -0,0 +1,233 @@
+/*
+ * Battery and Power Management code for the Sharp SL-Cxx00
+ *
+ * Copyright (c) 2005 Richard Purdie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/stat.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <asm/apm.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/hardware/scoop.h>
+
+#include <asm/arch/sharpsl.h>
+#include <asm/arch/spitz.h>
+#include <asm/arch/pxa-regs.h>
+#include "sharpsl.h"
+
+static int spitz_last_ac_status;
+
+static void spitz_charger_init(void)
+{
+	pxa_gpio_mode(SPITZ_GPIO_KEY_INT | GPIO_IN);
+	pxa_gpio_mode(SPITZ_GPIO_SYNC | GPIO_IN);
+}
+
+static void spitz_charge_led(int val)
+{
+	if (val == SHARPSL_LED_ERROR) {
+		dev_dbg(sharpsl_pm.dev, "Charge LED Error\n");
+	} else if (val == SHARPSL_LED_ON) {
+		dev_dbg(sharpsl_pm.dev, "Charge LED On\n");
+		set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_ORANGE);
+	} else {
+		dev_dbg(sharpsl_pm.dev, "Charge LED Off\n");
+		reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_ORANGE);
+	}
+}
+
+static void spitz_measure_temp(int on)
+{
+	if (on)
+		set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_ADC_TEMP_ON);
+	else
+		reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_ADC_TEMP_ON);
+}
+
+static void spitz_charge(int on)
+{
+	if (on) {
+		if (sharpsl_pm.flags & SHARPSL_SUSPENDED) {
+			set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B);
+			reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON);
+		} else {
+			reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B);
+			reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON);
+		}
+	} else {
+		reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B);
+		set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON);
+	}
+}
+
+static void spitz_discharge(int on)
+{
+	if (on)
+		set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_A);
+	else
+		reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_A);
+}
+
+/* HACK - For unknown reasons, accurate voltage readings are only made with a load
+   on the power bus which the green led on spitz provides */
+static void spitz_discharge1(int on)
+{
+	if (on)
+		set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_GREEN);
+	else
+		reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_GREEN);
+}
+
+static void spitz_presuspend(void)
+{
+	spitz_last_ac_status = STATUS_AC_IN();
+
+	/* GPIO Sleep Register */
+	PGSR0 = 0x00144018;
+	PGSR1 = 0x00EF0000;
+	if (machine_is_akita()) {
+		PGSR2 = 0x2121C000;
+		PGSR3 = 0x00600400;
+	} else {
+		PGSR2 = 0x0121C000;
+		PGSR3 = 0x00600000;
+	}
+
+	PGSR0 &= ~SPITZ_GPIO_G0_STROBE_BIT;
+	PGSR1 &= ~SPITZ_GPIO_G1_STROBE_BIT;
+	PGSR2 &= ~SPITZ_GPIO_G2_STROBE_BIT;
+	PGSR3 &= ~SPITZ_GPIO_G3_STROBE_BIT;
+	PGSR2 |= GPIO_bit(SPITZ_GPIO_KEY_STROBE0);
+
+	pxa_gpio_mode(GPIO18_RDY|GPIO_OUT | GPIO_DFLT_HIGH);
+
+	PRER = GPIO_bit(SPITZ_GPIO_KEY_INT);
+	PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET);
+	PWER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET) | PWER_RTC;
+	PKWR = GPIO_bit(SPITZ_GPIO_SYNC) | GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET);
+	PKSR = 0xffffffff; // clear
+
+	/* nRESET_OUT Disable */
+	PSLR |= PSLR_SL_ROD;
+
+	/* Clear reset status */
+	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
+
+	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
+	PCFR = PCFR_GPR_EN | PCFR_OPDE;
+}
+
+static void spitz_postsuspend(void)
+{
+	pxa_gpio_mode(GPIO18_RDY_MD);
+	pxa_gpio_mode(10 | GPIO_IN);
+}
+
+static int spitz_should_wakeup(unsigned int resume_on_alarm)
+{
+	int is_resume = 0;
+	int acin = STATUS_AC_IN();
+
+	if (spitz_last_ac_status != acin) {
+		if (acin) {
+			/* charge on */
+			sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
+			dev_dbg(sharpsl_pm.dev, "AC Inserted\n");
+		} else {
+			/* charge off */
+			dev_dbg(sharpsl_pm.dev, "AC Removed\n");
+			CHARGE_LED_OFF();
+			CHARGE_OFF();
+			sharpsl_pm.charge_mode = CHRG_OFF;
+		}
+		spitz_last_ac_status = acin;
+		/* Return to suspend as this must be what we were woken for */
+		return 0;
+	}
+
+	if (PEDR & GPIO_bit(SPITZ_GPIO_KEY_INT))
+		is_resume |= GPIO_bit(SPITZ_GPIO_KEY_INT);
+
+	if (PKSR & GPIO_bit(SPITZ_GPIO_SYNC))
+		is_resume |= GPIO_bit(SPITZ_GPIO_SYNC);
+
+	if (resume_on_alarm && (PEDR & PWER_RTC))
+		is_resume |= PWER_RTC;
+
+	dev_dbg(sharpsl_pm.dev, "is_resume: %x\n",is_resume);
+	return is_resume;
+}
+
+static unsigned long spitz_charger_wakeup(void)
+{
+	return (~GPLR0 & GPIO_bit(SPITZ_GPIO_KEY_INT)) | (GPLR0 & GPIO_bit(SPITZ_GPIO_SYNC));
+}
+
+static int spitz_acin_status(void)
+{
+	return (((~GPLR(SPITZ_GPIO_AC_IN)) & GPIO_bit(SPITZ_GPIO_AC_IN)) != 0);
+}
+
+struct sharpsl_charger_machinfo spitz_pm_machinfo = {
+	.init             = spitz_charger_init,
+	.gpio_batlock     = SPITZ_GPIO_BAT_COVER,
+	.gpio_acin        = SPITZ_GPIO_AC_IN,
+	.gpio_batfull     = SPITZ_GPIO_CHRG_FULL,
+	.gpio_fatal       = SPITZ_GPIO_FATAL_BAT,
+	.status_acin      = spitz_acin_status,
+	.discharge        = spitz_discharge,
+	.discharge1       = spitz_discharge1,
+	.charge           = spitz_charge,
+	.chargeled        = spitz_charge_led,
+	.measure_temp     = spitz_measure_temp,
+	.presuspend       = spitz_presuspend,
+	.postsuspend      = spitz_postsuspend,
+	.charger_wakeup   = spitz_charger_wakeup,
+	.should_wakeup    = spitz_should_wakeup,
+	.bat_levels       = 40,
+	.bat_levels_noac  = spitz_battery_levels_noac,
+	.bat_levels_acin  = spitz_battery_levels_acin,
+	.status_high_acin = 188,
+	.status_low_acin  = 178,
+	.status_high_noac = 185,
+	.status_low_noac  = 175,
+};
+
+static struct platform_device *spitzpm_device;
+
+static int __devinit spitzpm_init(void)
+{
+	int ret;
+
+	spitzpm_device = platform_device_alloc("sharpsl-pm", -1);
+	if (!spitzpm_device)
+		return -ENOMEM;
+
+	spitzpm_device->dev.platform_data = &spitz_pm_machinfo;
+	ret = platform_device_add(spitzpm_device);
+
+	if (ret)
+		platform_device_put(spitzpm_device);
+
+	return ret;
+}
+
+static void spitzpm_exit(void)
+{
+ 	platform_device_unregister(spitzpm_device);
+}
+
+module_init(spitzpm_init);
+module_exit(spitzpm_exit);
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 4d826c021315..a68b30eff4d2 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -19,6 +19,8 @@
  *   22nd Aug 2003 Initial version.
  *   20th Dec 2004 Added ssp_config for changing port config without
  *                 closing the port.
+ *    4th Aug 2005 Added option to disable irq handler registration and
+ *                 cleaned up irq and clock detection.
  */
 
 #include <linux/module.h>
@@ -37,6 +39,26 @@
 
 #define PXA_SSP_PORTS 	3
 
+struct ssp_info_ {
+	int irq;
+	u32 clock;
+};
+
+/*
+ * SSP port clock and IRQ settings
+ */
+static const struct ssp_info_ ssp_info[PXA_SSP_PORTS] = {
+#if defined (CONFIG_PXA27x)
+	{IRQ_SSP,	CKEN23_SSP1},
+	{IRQ_SSP2,	CKEN3_SSP2},
+	{IRQ_SSP3,	CKEN4_SSP3},
+#else
+	{IRQ_SSP,	CKEN3_SSP},
+	{IRQ_NSSP,	CKEN9_NSSP},
+	{IRQ_ASSP,	CKEN10_ASSP},
+#endif
+};
+
 static DECLARE_MUTEX(sem);
 static int use_count[PXA_SSP_PORTS] = {0, 0, 0};
 
@@ -210,9 +232,9 @@ int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 spee
  *   %-EBUSY	if the resources are already in use
  *   %0		on success
  */
-int ssp_init(struct ssp_dev *dev, u32 port)
+int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags)
 {
-	int ret, irq;
+	int ret;
 
 	if (port > PXA_SSP_PORTS || port == 0)
 		return -ENODEV;
@@ -229,61 +251,20 @@ int ssp_init(struct ssp_dev *dev, u32 port)
 		up(&sem);
 		return -EBUSY;
 	}
-
-	switch (port) {
-		case 1:
-			irq = IRQ_SSP;
-			break;
-#if defined (CONFIG_PXA27x)
-		case 2:
-			irq = IRQ_SSP2;
-			break;
-		case 3:
-			irq = IRQ_SSP3;
-			break;
-#else
-		case 2:
-			irq = IRQ_NSSP;
-			break;
-		case 3:
-			irq = IRQ_ASSP;
-			break;
-#endif
-		default:
-			return -ENODEV;
-	}
-
 	dev->port = port;
 
-	ret = request_irq(irq, ssp_interrupt, 0, "SSP", dev);
-	if (ret)
-		goto out_region;
+	/* do we need to get irq */
+	if (!(init_flags & SSP_NO_IRQ)) {
+		ret = request_irq(ssp_info[port-1].irq, ssp_interrupt,
+				0, "SSP", dev);
+	    	if (ret)
+			goto out_region;
+	    	dev->irq = ssp_info[port-1].irq;
+	} else
+		dev->irq = 0;
 
 	/* turn on SSP port clock */
-	switch (dev->port) {
-#if defined (CONFIG_PXA27x)
-		case 1:
-			pxa_set_cken(CKEN23_SSP1, 1);
-			break;
-		case 2:
-			pxa_set_cken(CKEN3_SSP2, 1);
-			break;
-		case 3:
-			pxa_set_cken(CKEN4_SSP3, 1);
-			break;
-#else
-		case 1:
-			pxa_set_cken(CKEN3_SSP, 1);
-			break;
-		case 2:
-			pxa_set_cken(CKEN9_NSSP, 1);
-			break;
-		case 3:
-			pxa_set_cken(CKEN10_ASSP, 1);
-			break;
-#endif
-	}
-
+	pxa_set_cken(ssp_info[port-1].clock, 1);
 	up(&sem);
 	return 0;
 
@@ -301,46 +282,17 @@ out_region:
  */
 void ssp_exit(struct ssp_dev *dev)
 {
-	int irq;
-
 	down(&sem);
 	SSCR0_P(dev->port) &= ~SSCR0_SSE;
 
-	/* find irq, save power and turn off SSP port clock */
-	switch (dev->port) {
-#if defined (CONFIG_PXA27x)
-		case 1:
-			irq = IRQ_SSP;
-			pxa_set_cken(CKEN23_SSP1, 0);
-			break;
-		case 2:
-			irq = IRQ_SSP2;
-			pxa_set_cken(CKEN3_SSP2, 0);
-			break;
-		case 3:
-			irq = IRQ_SSP3;
-			pxa_set_cken(CKEN4_SSP3, 0);
-			break;
-#else
-		case 1:
-			irq = IRQ_SSP;
-			pxa_set_cken(CKEN3_SSP, 0);
-			break;
-		case 2:
-			irq = IRQ_NSSP;
-			pxa_set_cken(CKEN9_NSSP, 0);
-			break;
-		case 3:
-			irq = IRQ_ASSP;
-			pxa_set_cken(CKEN10_ASSP, 0);
-			break;
-#endif
-		default:
-			printk(KERN_WARNING "SSP: tried to close invalid port\n");
-			return;
+    	if (dev->port > PXA_SSP_PORTS || dev->port == 0) {
+		printk(KERN_WARNING "SSP: tried to close invalid port\n");
+		return;
 	}
 
-	free_irq(irq, dev);
+	pxa_set_cken(ssp_info[dev->port-1].clock, 0);
+	if (dev->irq)
+		free_irq(dev->irq, dev);
 	release_mem_region(__PREG(SSCR0_P(dev->port)), 0x2c);
 	use_count[dev->port - 1]--;
 	up(&sem);
diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S
index 8a3f27b76784..6f6dbbd08021 100644
--- a/arch/arm/mach-pxa/standby.S
+++ b/arch/arm/mach-pxa/standby.S
@@ -21,7 +21,7 @@
 ENTRY(pxa_cpu_standby)
 	ldr	r0, =PSSR
 	mov	r1, #(PSSR_PH | PSSR_STS)
-	mov	r2, #2
+	mov	r2, #PWRMODE_STANDBY
 	mov	r3, #UNCACHED_PHYS_0	@ Read mem context in.
 	ldr	ip, [r3]
 	b	1f
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 7dad3f1465e0..b9b2057349eb 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -132,11 +132,13 @@ static void __init pxa_timer_init(void)
 	tv.tv_sec = pxa_get_rtc_time();
 	do_settimeofday(&tv);
 
-	OSMR0 = 0;		/* set initial match at 0 */
+	OIER = 0;		/* disable any timer interrupts */
+	OSCR = LATCH*2;		/* push OSCR out of the way */
+	OSMR0 = LATCH;		/* set initial match */
 	OSSR = 0xf;		/* clear status on all timers */
 	setup_irq(IRQ_OST0, &pxa_timer_irq);
-	OIER |= OIER_E0;	/* enable match on timer 0 to cause interrupts */
-	OSCR = 0;		/* initialize free-running timer, force first match */
+	OIER = OIER_E0;		/* enable match on timer 0 to cause interrupts */
+	OSCR = 0;		/* initialize free-running timer */
 }
 
 #ifdef CONFIG_NO_IDLE_HZ
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
new file mode 100644
index 000000000000..e4f92efc616e
--- /dev/null
+++ b/arch/arm/mach-pxa/tosa.c
@@ -0,0 +1,306 @@
+/*
+ *  Support for Sharp SL-C6000x PDAs
+ *  Model: (Tosa)
+ *
+ *  Copyright (c) 2005 Dirk Opfer
+ *
+ *	Based on code written by Sharp/Lineo for 2.4 kernels
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/major.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/mmc/host.h>
+
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/udc.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/irq.h>
+#include <asm/arch/tosa.h>
+
+#include <asm/hardware/scoop.h>
+#include <asm/mach/sharpsl_param.h>
+
+#include "generic.h"
+
+
+/*
+ * SCOOP Device
+ */
+static struct resource tosa_scoop_resources[] = {
+	[0] = {
+		.start	= TOSA_CF_PHYS,
+		.end	= TOSA_CF_PHYS + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct scoop_config tosa_scoop_setup = {
+	.io_dir 	= TOSA_SCOOP_IO_DIR,
+	.io_out		= TOSA_SCOOP_IO_OUT,
+
+};
+
+struct platform_device tosascoop_device = {
+	.name		= "sharp-scoop",
+	.id		= 0,
+	.dev		= {
+ 		.platform_data	= &tosa_scoop_setup,
+	},
+	.num_resources	= ARRAY_SIZE(tosa_scoop_resources),
+	.resource	= tosa_scoop_resources,
+};
+
+
+/*
+ * SCOOP Device Jacket
+ */
+static struct resource tosa_scoop_jc_resources[] = {
+	[0] = {
+		.start		= TOSA_SCOOP_PHYS + 0x40,
+		.end		= TOSA_SCOOP_PHYS + 0xfff,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct scoop_config tosa_scoop_jc_setup = {
+	.io_dir 	= TOSA_SCOOP_JC_IO_DIR,
+	.io_out		= TOSA_SCOOP_JC_IO_OUT,
+};
+
+struct platform_device tosascoop_jc_device = {
+	.name		= "sharp-scoop",
+	.id		= 1,
+	.dev		= {
+ 		.platform_data	= &tosa_scoop_jc_setup,
+		.parent 	= &tosascoop_device.dev,
+	},
+	.num_resources	= ARRAY_SIZE(tosa_scoop_jc_resources),
+	.resource	= tosa_scoop_jc_resources,
+};
+
+/*
+ * PCMCIA
+ */
+static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = {
+{
+	.dev        = &tosascoop_device.dev,
+	.irq        = TOSA_IRQ_GPIO_CF_IRQ,
+	.cd_irq     = TOSA_IRQ_GPIO_CF_CD,
+	.cd_irq_str = "PCMCIA0 CD",
+},{
+	.dev        = &tosascoop_jc_device.dev,
+	.irq        = TOSA_IRQ_GPIO_JC_CF_IRQ,
+	.cd_irq     = -1,
+},
+};
+
+static void tosa_pcmcia_init(void)
+{
+	/* Setup default state of GPIO outputs
+	   before we enable them as outputs. */
+	GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
+		GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
+		GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
+		GPIO_bit(GPIO53_nPCE_2);
+
+	pxa_gpio_mode(GPIO48_nPOE_MD);
+	pxa_gpio_mode(GPIO49_nPWE_MD);
+	pxa_gpio_mode(GPIO50_nPIOR_MD);
+	pxa_gpio_mode(GPIO51_nPIOW_MD);
+	pxa_gpio_mode(GPIO55_nPREG_MD);
+	pxa_gpio_mode(GPIO56_nPWAIT_MD);
+	pxa_gpio_mode(GPIO57_nIOIS16_MD);
+	pxa_gpio_mode(GPIO52_nPCE_1_MD);
+	pxa_gpio_mode(GPIO53_nPCE_2_MD);
+	pxa_gpio_mode(GPIO54_pSKTSEL_MD);
+}
+
+static struct scoop_pcmcia_config tosa_pcmcia_config = {
+	.devs         = &tosa_pcmcia_scoop[0],
+	.num_devs     = 2,
+	.pcmcia_init  = tosa_pcmcia_init,
+};
+
+/*
+ * USB Device Controller
+ */
+static void tosa_udc_command(int cmd)
+{
+	switch(cmd)	{
+		case PXA2XX_UDC_CMD_CONNECT:
+			set_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP);
+			break;
+		case PXA2XX_UDC_CMD_DISCONNECT:
+			reset_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP);
+			break;
+	}
+}
+
+static int tosa_udc_is_connected(void)
+{
+	return ((GPLR(TOSA_GPIO_USB_IN) & GPIO_bit(TOSA_GPIO_USB_IN)) == 0);
+}
+
+
+static struct pxa2xx_udc_mach_info udc_info __initdata = {
+	.udc_command		= tosa_udc_command,
+	.udc_is_connected	= tosa_udc_is_connected,
+};
+
+/*
+ * MMC/SD Device
+ */
+static struct pxamci_platform_data tosa_mci_platform_data;
+
+static int tosa_mci_init(struct device *dev, irqreturn_t (*tosa_detect_int)(int, void *, struct pt_regs *), void *data)
+{
+	int err;
+
+	/* setup GPIO for PXA25x MMC controller */
+	pxa_gpio_mode(GPIO6_MMCCLK_MD);
+	pxa_gpio_mode(GPIO8_MMCCS0_MD);
+	pxa_gpio_mode(TOSA_GPIO_nSD_DETECT | GPIO_IN);
+
+	tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
+
+	err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int, SA_INTERRUPT,
+				"MMC/SD card detect", data);
+	if (err) {
+		printk(KERN_ERR "tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
+		return -1;
+	}
+
+	set_irq_type(TOSA_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE);
+
+	return 0;
+}
+
+static void tosa_mci_setpower(struct device *dev, unsigned int vdd)
+{
+	struct pxamci_platform_data* p_d = dev->platform_data;
+
+	if (( 1 << vdd) & p_d->ocr_mask) {
+		set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON);
+	} else {
+		reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON);
+	}
+}
+
+static int tosa_mci_get_ro(struct device *dev)
+{
+	return (read_scoop_reg(&tosascoop_device.dev, SCOOP_GPWR)&TOSA_SCOOP_SD_WP);
+}
+
+static void tosa_mci_exit(struct device *dev, void *data)
+{
+	free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
+}
+
+static struct pxamci_platform_data tosa_mci_platform_data = {
+	.ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
+	.init           = tosa_mci_init,
+	.get_ro		= tosa_mci_get_ro,
+	.setpower       = tosa_mci_setpower,
+	.exit           = tosa_mci_exit,
+};
+
+/*
+ * Irda
+ */
+static void tosa_irda_transceiver_mode(struct device *dev, int mode)
+{
+	if (mode & IR_OFF) {
+		reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN);
+		pxa_gpio_mode(GPIO47_STTXD|GPIO_DFLT_LOW);
+		pxa_gpio_mode(GPIO47_STTXD|GPIO_OUT);
+	} else {
+		pxa_gpio_mode(GPIO47_STTXD_MD);
+		set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN);
+	}
+}
+
+static struct pxaficp_platform_data tosa_ficp_platform_data = {
+	.transceiver_cap  = IR_SIRMODE | IR_OFF,
+	.transceiver_mode = tosa_irda_transceiver_mode,
+};
+
+/*
+ * Tosa Keyboard
+ */
+static struct platform_device tosakbd_device = {
+	.name		= "tosa-keyboard",
+	.id		= -1,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&tosascoop_device,
+	&tosascoop_jc_device,
+	&tosakbd_device,
+};
+
+static void __init tosa_init(void)
+{
+	pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_IN);
+	pxa_gpio_mode(TOSA_GPIO_TC6393_INT | GPIO_IN);
+	pxa_gpio_mode(TOSA_GPIO_USB_IN | GPIO_IN);
+
+	/* setup sleep mode values */
+	PWER  = 0x00000002;
+	PFER  = 0x00000000;
+	PRER  = 0x00000002;
+	PGSR0 = 0x00000000;
+	PGSR1 = 0x00FF0002;
+	PGSR2 = 0x00014000;
+	PCFR |= PCFR_OPDE;
+
+	/* enable batt_fault */
+	PMCR = 0x01;
+
+	pxa_set_mci_info(&tosa_mci_platform_data);
+	pxa_set_udc_info(&udc_info);
+	pxa_set_ficp_info(&tosa_ficp_platform_data);
+	platform_scoop_config = &tosa_pcmcia_config;
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init fixup_tosa(struct machine_desc *desc,
+		struct tag *tags, char **cmdline, struct meminfo *mi)
+{
+	sharpsl_save_param();
+	mi->nr_banks=1;
+	mi->bank[0].start = 0xa0000000;
+	mi->bank[0].node = 0;
+	mi->bank[0].size = (64*1024*1024);
+}
+
+MACHINE_START(TOSA, "SHARP Tosa")
+	.phys_ram	= 0xa0000000,
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup          = fixup_tosa,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa_init_irq,
+	.init_machine   = tosa_init,
+	.timer          = &pxa_timer,
+MACHINE_END
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
new file mode 100644
index 000000000000..129976866d47
--- /dev/null
+++ b/arch/arm/mach-realview/Kconfig
@@ -0,0 +1,20 @@
+menu "RealView platform type"
+	depends on ARCH_REALVIEW
+
+config MACH_REALVIEW_EB
+	bool "Support RealView/EB platform"
+	default n
+	select ARM_GIC
+	help
+	  Include support for the ARM(R) RealView Emulation Baseboard platform.
+
+config REALVIEW_MPCORE
+	bool "Support MPcore tile"
+	depends on MACH_REALVIEW_EB
+	help
+	  Enable support for the MPCore tile on the Realview platform.
+	  Since there are device address and interrupt differences, a
+	  kernel built with this option enabled is not compatible with
+	  other tiles.
+
+endmenu
diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile
new file mode 100644
index 000000000000..36e76ba937fc
--- /dev/null
+++ b/arch/arm/mach-realview/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-y					:= core.o clock.o
+obj-$(CONFIG_MACH_REALVIEW_EB)		+= realview_eb.o
+obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o
+obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
+obj-$(CONFIG_LOCAL_TIMERS)		+= localtimer.o
diff --git a/arch/arm/mach-realview/Makefile.boot b/arch/arm/mach-realview/Makefile.boot
new file mode 100644
index 000000000000..c7e75acfe6c9
--- /dev/null
+++ b/arch/arm/mach-realview/Makefile.boot
@@ -0,0 +1,4 @@
+   zreladdr-y	:= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000
+
diff --git a/arch/arm/mach-realview/clock.c b/arch/arm/mach-realview/clock.c
new file mode 100644
index 000000000000..002635c97bb6
--- /dev/null
+++ b/arch/arm/mach-realview/clock.c
@@ -0,0 +1,145 @@
+/*
+ *  linux/arch/arm/mach-realview/clock.c
+ *
+ *  Copyright (C) 2004 ARM Limited.
+ *  Written by Deep Blue Solutions Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+
+#include <asm/semaphore.h>
+#include <asm/hardware/clock.h>
+#include <asm/hardware/icst307.h>
+
+#include "clock.h"
+
+static LIST_HEAD(clocks);
+static DECLARE_MUTEX(clocks_sem);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	struct clk *p, *clk = ERR_PTR(-ENOENT);
+
+	down(&clocks_sem);
+	list_for_each_entry(p, &clocks, node) {
+		if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
+			clk = p;
+			break;
+		}
+	}
+	up(&clocks_sem);
+
+	return clk;
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+	module_put(clk->owner);
+}
+EXPORT_SYMBOL(clk_put);
+
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+int clk_use(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_use);
+
+void clk_unuse(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_unuse);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	return rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	int ret = -EIO;
+
+	if (clk->setvco) {
+		struct icst307_vco vco;
+
+		vco = icst307_khz_to_vco(clk->params, rate / 1000);
+		clk->rate = icst307_khz(clk->params, vco) * 1000;
+
+		printk("Clock %s: setting VCO reg params: S=%d R=%d V=%d\n",
+			clk->name, vco.s, vco.r, vco.v);
+
+		clk->setvco(clk, vco);
+		ret = 0;
+	}
+	return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+/*
+ * These are fixed clocks.
+ */
+static struct clk kmi_clk = {
+	.name	= "KMIREFCLK",
+	.rate	= 24000000,
+};
+
+static struct clk uart_clk = {
+	.name	= "UARTCLK",
+	.rate	= 24000000,
+};
+
+static struct clk mmci_clk = {
+	.name	= "MCLK",
+	.rate	= 33000000,
+};
+
+int clk_register(struct clk *clk)
+{
+	down(&clocks_sem);
+	list_add(&clk->node, &clocks);
+	up(&clocks_sem);
+	return 0;
+}
+EXPORT_SYMBOL(clk_register);
+
+void clk_unregister(struct clk *clk)
+{
+	down(&clocks_sem);
+	list_del(&clk->node);
+	up(&clocks_sem);
+}
+EXPORT_SYMBOL(clk_unregister);
+
+static int __init clk_init(void)
+{
+	clk_register(&kmi_clk);
+	clk_register(&uart_clk);
+	clk_register(&mmci_clk);
+	return 0;
+}
+arch_initcall(clk_init);
diff --git a/arch/arm/mach-realview/clock.h b/arch/arm/mach-realview/clock.h
new file mode 100644
index 000000000000..dadba695e181
--- /dev/null
+++ b/arch/arm/mach-realview/clock.h
@@ -0,0 +1,25 @@
+/*
+ *  linux/arch/arm/mach-realview/clock.h
+ *
+ *  Copyright (C) 2004 ARM Limited.
+ *  Written by Deep Blue Solutions Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+struct module;
+struct icst307_params;
+
+struct clk {
+	struct list_head	node;
+	unsigned long		rate;
+	struct module		*owner;
+	const char		*name;
+	const struct icst307_params *params;
+	void			*data;
+	void			(*setvco)(struct clk *, struct icst307_vco vco);
+};
+
+int clk_register(struct clk *clk);
+void clk_unregister(struct clk *clk);
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
new file mode 100644
index 000000000000..af6580f1ceb8
--- /dev/null
+++ b/arch/arm/mach-realview/core.c
@@ -0,0 +1,609 @@
+/*
+ *  linux/arch/arm/mach-realview/core.c
+ *
+ *  Copyright (C) 1999 - 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+
+#include <asm/system.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/leds.h>
+#include <asm/hardware/amba.h>
+#include <asm/hardware/amba_clcd.h>
+#include <asm/hardware/arm_timer.h>
+#include <asm/hardware/icst307.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <asm/mach/mmc.h>
+
+#include <asm/hardware/gic.h>
+
+#include "core.h"
+#include "clock.h"
+
+#define REALVIEW_REFCOUNTER	(__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_24MHz_OFFSET)
+
+/*
+ * This is the RealView sched_clock implementation.  This has
+ * a resolution of 41.7ns, and a maximum value of about 179s.
+ */
+unsigned long long sched_clock(void)
+{
+	unsigned long long v;
+
+	v = (unsigned long long)readl(REALVIEW_REFCOUNTER) * 125;
+	do_div(v, 3);
+
+	return v;
+}
+
+
+#define REALVIEW_FLASHCTRL    (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_FLASH_OFFSET)
+
+static int realview_flash_init(void)
+{
+	u32 val;
+
+	val = __raw_readl(REALVIEW_FLASHCTRL);
+	val &= ~REALVIEW_FLASHPROG_FLVPPEN;
+	__raw_writel(val, REALVIEW_FLASHCTRL);
+
+	return 0;
+}
+
+static void realview_flash_exit(void)
+{
+	u32 val;
+
+	val = __raw_readl(REALVIEW_FLASHCTRL);
+	val &= ~REALVIEW_FLASHPROG_FLVPPEN;
+	__raw_writel(val, REALVIEW_FLASHCTRL);
+}
+
+static void realview_flash_set_vpp(int on)
+{
+	u32 val;
+
+	val = __raw_readl(REALVIEW_FLASHCTRL);
+	if (on)
+		val |= REALVIEW_FLASHPROG_FLVPPEN;
+	else
+		val &= ~REALVIEW_FLASHPROG_FLVPPEN;
+	__raw_writel(val, REALVIEW_FLASHCTRL);
+}
+
+static struct flash_platform_data realview_flash_data = {
+	.map_name		= "cfi_probe",
+	.width			= 4,
+	.init			= realview_flash_init,
+	.exit			= realview_flash_exit,
+	.set_vpp		= realview_flash_set_vpp,
+};
+
+static struct resource realview_flash_resource = {
+	.start			= REALVIEW_FLASH_BASE,
+	.end			= REALVIEW_FLASH_BASE + REALVIEW_FLASH_SIZE,
+	.flags			= IORESOURCE_MEM,
+};
+
+struct platform_device realview_flash_device = {
+	.name			= "armflash",
+	.id			= 0,
+	.dev			= {
+		.platform_data	= &realview_flash_data,
+	},
+	.num_resources		= 1,
+	.resource		= &realview_flash_resource,
+};
+
+static struct resource realview_smc91x_resources[] = {
+	[0] = {
+		.start		= REALVIEW_ETH_BASE,
+		.end		= REALVIEW_ETH_BASE + SZ_64K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= IRQ_ETH,
+		.end		= IRQ_ETH,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device realview_smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(realview_smc91x_resources),
+	.resource	= realview_smc91x_resources,
+};
+
+#define REALVIEW_SYSMCI	(__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET)
+
+static unsigned int realview_mmc_status(struct device *dev)
+{
+	struct amba_device *adev = container_of(dev, struct amba_device, dev);
+	u32 mask;
+
+	if (adev->res.start == REALVIEW_MMCI0_BASE)
+		mask = 1;
+	else
+		mask = 2;
+
+	return readl(REALVIEW_SYSMCI) & mask;
+}
+
+struct mmc_platform_data realview_mmc0_plat_data = {
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.status		= realview_mmc_status,
+};
+
+struct mmc_platform_data realview_mmc1_plat_data = {
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.status		= realview_mmc_status,
+};
+
+/*
+ * Clock handling
+ */
+static const struct icst307_params realview_oscvco_params = {
+	.ref		= 24000,
+	.vco_max	= 200000,
+	.vd_min		= 4 + 8,
+	.vd_max		= 511 + 8,
+	.rd_min		= 1 + 2,
+	.rd_max		= 127 + 2,
+};
+
+static void realview_oscvco_set(struct clk *clk, struct icst307_vco vco)
+{
+	void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET;
+	void __iomem *sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC1_OFFSET;
+	u32 val;
+
+	val = readl(sys_osc) & ~0x7ffff;
+	val |= vco.v | (vco.r << 9) | (vco.s << 16);
+
+	writel(0xa05f, sys_lock);
+	writel(val, sys_osc);
+	writel(0, sys_lock);
+}
+
+struct clk realview_clcd_clk = {
+	.name	= "CLCDCLK",
+	.params	= &realview_oscvco_params,
+	.setvco = realview_oscvco_set,
+};
+
+/*
+ * CLCD support.
+ */
+#define SYS_CLCD_MODE_MASK	(3 << 0)
+#define SYS_CLCD_MODE_888	(0 << 0)
+#define SYS_CLCD_MODE_5551	(1 << 0)
+#define SYS_CLCD_MODE_565_RLSB	(2 << 0)
+#define SYS_CLCD_MODE_565_BLSB	(3 << 0)
+#define SYS_CLCD_NLCDIOON	(1 << 2)
+#define SYS_CLCD_VDDPOSSWITCH	(1 << 3)
+#define SYS_CLCD_PWR3V5SWITCH	(1 << 4)
+#define SYS_CLCD_ID_MASK	(0x1f << 8)
+#define SYS_CLCD_ID_SANYO_3_8	(0x00 << 8)
+#define SYS_CLCD_ID_UNKNOWN_8_4	(0x01 << 8)
+#define SYS_CLCD_ID_EPSON_2_2	(0x02 << 8)
+#define SYS_CLCD_ID_SANYO_2_5	(0x07 << 8)
+#define SYS_CLCD_ID_VGA		(0x1f << 8)
+
+static struct clcd_panel vga = {
+	.mode		= {
+		.name		= "VGA",
+		.refresh	= 60,
+		.xres		= 640,
+		.yres		= 480,
+		.pixclock	= 39721,
+		.left_margin	= 40,
+		.right_margin	= 24,
+		.upper_margin	= 32,
+		.lower_margin	= 11,
+		.hsync_len	= 96,
+		.vsync_len	= 2,
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_BCD | TIM2_IPC,
+	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+	.bpp		= 16,
+};
+
+static struct clcd_panel sanyo_3_8_in = {
+	.mode		= {
+		.name		= "Sanyo QVGA",
+		.refresh	= 116,
+		.xres		= 320,
+		.yres		= 240,
+		.pixclock	= 100000,
+		.left_margin	= 6,
+		.right_margin	= 6,
+		.upper_margin	= 5,
+		.lower_margin	= 5,
+		.hsync_len	= 6,
+		.vsync_len	= 6,
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_BCD,
+	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+	.bpp		= 16,
+};
+
+static struct clcd_panel sanyo_2_5_in = {
+	.mode		= {
+		.name		= "Sanyo QVGA Portrait",
+		.refresh	= 116,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 100000,
+		.left_margin	= 20,
+		.right_margin	= 10,
+		.upper_margin	= 2,
+		.lower_margin	= 2,
+		.hsync_len	= 10,
+		.vsync_len	= 2,
+		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_IVS | TIM2_IHS | TIM2_IPC,
+	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+	.bpp		= 16,
+};
+
+static struct clcd_panel epson_2_2_in = {
+	.mode		= {
+		.name		= "Epson QCIF",
+		.refresh	= 390,
+		.xres		= 176,
+		.yres		= 220,
+		.pixclock	= 62500,
+		.left_margin	= 3,
+		.right_margin	= 2,
+		.upper_margin	= 1,
+		.lower_margin	= 0,
+		.hsync_len	= 3,
+		.vsync_len	= 2,
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_BCD | TIM2_IPC,
+	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+	.bpp		= 16,
+};
+
+/*
+ * Detect which LCD panel is connected, and return the appropriate
+ * clcd_panel structure.  Note: we do not have any information on
+ * the required timings for the 8.4in panel, so we presently assume
+ * VGA timings.
+ */
+static struct clcd_panel *realview_clcd_panel(void)
+{
+	void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
+	struct clcd_panel *panel = &vga;
+	u32 val;
+
+	val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
+	if (val == SYS_CLCD_ID_SANYO_3_8)
+		panel = &sanyo_3_8_in;
+	else if (val == SYS_CLCD_ID_SANYO_2_5)
+		panel = &sanyo_2_5_in;
+	else if (val == SYS_CLCD_ID_EPSON_2_2)
+		panel = &epson_2_2_in;
+	else if (val == SYS_CLCD_ID_VGA)
+		panel = &vga;
+	else {
+		printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
+			val);
+		panel = &vga;
+	}
+
+	return panel;
+}
+
+/*
+ * Disable all display connectors on the interface module.
+ */
+static void realview_clcd_disable(struct clcd_fb *fb)
+{
+	void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
+	u32 val;
+
+	val = readl(sys_clcd);
+	val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
+	writel(val, sys_clcd);
+}
+
+/*
+ * Enable the relevant connector on the interface module.
+ */
+static void realview_clcd_enable(struct clcd_fb *fb)
+{
+	void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
+	u32 val;
+
+	val = readl(sys_clcd);
+	val &= ~SYS_CLCD_MODE_MASK;
+
+	switch (fb->fb.var.green.length) {
+	case 5:
+		val |= SYS_CLCD_MODE_5551;
+		break;
+	case 6:
+		val |= SYS_CLCD_MODE_565_RLSB;
+		break;
+	case 8:
+		val |= SYS_CLCD_MODE_888;
+		break;
+	}
+
+	/*
+	 * Set the MUX
+	 */
+	writel(val, sys_clcd);
+
+	/*
+	 * And now enable the PSUs
+	 */
+	val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
+	writel(val, sys_clcd);
+}
+
+static unsigned long framesize = SZ_1M;
+
+static int realview_clcd_setup(struct clcd_fb *fb)
+{
+	dma_addr_t dma;
+
+	fb->panel		= realview_clcd_panel();
+
+	fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
+						    &dma, GFP_KERNEL);
+	if (!fb->fb.screen_base) {
+		printk(KERN_ERR "CLCD: unable to map framebuffer\n");
+		return -ENOMEM;
+	}
+
+	fb->fb.fix.smem_start	= dma;
+	fb->fb.fix.smem_len	= framesize;
+
+	return 0;
+}
+
+static int realview_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
+{
+	return dma_mmap_writecombine(&fb->dev->dev, vma,
+				     fb->fb.screen_base,
+				     fb->fb.fix.smem_start,
+				     fb->fb.fix.smem_len);
+}
+
+static void realview_clcd_remove(struct clcd_fb *fb)
+{
+	dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
+			      fb->fb.screen_base, fb->fb.fix.smem_start);
+}
+
+struct clcd_board clcd_plat_data = {
+	.name		= "RealView",
+	.check		= clcdfb_check,
+	.decode		= clcdfb_decode,
+	.disable	= realview_clcd_disable,
+	.enable		= realview_clcd_enable,
+	.setup		= realview_clcd_setup,
+	.mmap		= realview_clcd_mmap,
+	.remove		= realview_clcd_remove,
+};
+
+#ifdef CONFIG_LEDS
+#define VA_LEDS_BASE (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LED_OFFSET)
+
+void realview_leds_event(led_event_t ledevt)
+{
+	unsigned long flags;
+	u32 val;
+
+	local_irq_save(flags);
+	val = readl(VA_LEDS_BASE);
+
+	switch (ledevt) {
+	case led_idle_start:
+		val = val & ~REALVIEW_SYS_LED0;
+		break;
+
+	case led_idle_end:
+		val = val | REALVIEW_SYS_LED0;
+		break;
+
+	case led_timer:
+		val = val ^ REALVIEW_SYS_LED1;
+		break;
+
+	case led_halted:
+		val = 0;
+		break;
+
+	default:
+		break;
+	}
+
+	writel(val, VA_LEDS_BASE);
+	local_irq_restore(flags);
+}
+#endif	/* CONFIG_LEDS */
+
+/*
+ * Where is the timer (VA)?
+ */
+#define TIMER0_VA_BASE		 __io_address(REALVIEW_TIMER0_1_BASE)
+#define TIMER1_VA_BASE		(__io_address(REALVIEW_TIMER0_1_BASE) + 0x20)
+#define TIMER2_VA_BASE		 __io_address(REALVIEW_TIMER2_3_BASE)
+#define TIMER3_VA_BASE		(__io_address(REALVIEW_TIMER2_3_BASE) + 0x20)
+
+/*
+ * How long is the timer interval?
+ */
+#define TIMER_INTERVAL	(TICKS_PER_uSEC * mSEC_10)
+#if TIMER_INTERVAL >= 0x100000
+#define TIMER_RELOAD	(TIMER_INTERVAL >> 8)
+#define TIMER_DIVISOR	(TIMER_CTRL_DIV256)
+#define TICKS2USECS(x)	(256 * (x) / TICKS_PER_uSEC)
+#elif TIMER_INTERVAL >= 0x10000
+#define TIMER_RELOAD	(TIMER_INTERVAL >> 4)		/* Divide by 16 */
+#define TIMER_DIVISOR	(TIMER_CTRL_DIV16)
+#define TICKS2USECS(x)	(16 * (x) / TICKS_PER_uSEC)
+#else
+#define TIMER_RELOAD	(TIMER_INTERVAL)
+#define TIMER_DIVISOR	(TIMER_CTRL_DIV1)
+#define TICKS2USECS(x)	((x) / TICKS_PER_uSEC)
+#endif
+
+/*
+ * Returns number of ms since last clock interrupt.  Note that interrupts
+ * will have been disabled by do_gettimeoffset()
+ */
+static unsigned long realview_gettimeoffset(void)
+{
+	unsigned long ticks1, ticks2, status;
+
+	/*
+	 * Get the current number of ticks.  Note that there is a race
+	 * condition between us reading the timer and checking for
+	 * an interrupt.  We get around this by ensuring that the
+	 * counter has not reloaded between our two reads.
+	 */
+	ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff;
+	do {
+		ticks1 = ticks2;
+		status = __raw_readl(__io_address(REALVIEW_GIC_DIST_BASE + GIC_DIST_PENDING_SET)
+				     + ((IRQ_TIMERINT0_1 >> 5) << 2));
+		ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff;
+	} while (ticks2 > ticks1);
+
+	/*
+	 * Number of ticks since last interrupt.
+	 */
+	ticks1 = TIMER_RELOAD - ticks2;
+
+	/*
+	 * Interrupt pending?  If so, we've reloaded once already.
+	 *
+	 * FIXME: Need to check this is effectively timer 0 that expires
+	 */
+	if (status & IRQMASK_TIMERINT0_1)
+		ticks1 += TIMER_RELOAD;
+
+	/*
+	 * Convert the ticks to usecs
+	 */
+	return TICKS2USECS(ticks1);
+}
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t realview_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	write_seqlock(&xtime_lock);
+
+	// ...clear the interrupt
+	writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
+
+	timer_tick(regs);
+
+#if defined(CONFIG_SMP) && !defined(CONFIG_LOCAL_TIMERS)
+	smp_send_timer();
+	update_process_times(user_mode(regs));
+#endif
+
+	write_sequnlock(&xtime_lock);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction realview_timer_irq = {
+	.name		= "RealView Timer Tick",
+	.flags		= SA_INTERRUPT | SA_TIMER,
+	.handler	= realview_timer_interrupt,
+};
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+static void __init realview_timer_init(void)
+{
+	u32 val;
+
+	/* 
+	 * set clock frequency: 
+	 *	REALVIEW_REFCLK is 32KHz
+	 *	REALVIEW_TIMCLK is 1MHz
+	 */
+	val = readl(__io_address(REALVIEW_SCTL_BASE));
+	writel((REALVIEW_TIMCLK << REALVIEW_TIMER1_EnSel) |
+	       (REALVIEW_TIMCLK << REALVIEW_TIMER2_EnSel) | 
+	       (REALVIEW_TIMCLK << REALVIEW_TIMER3_EnSel) |
+	       (REALVIEW_TIMCLK << REALVIEW_TIMER4_EnSel) | val,
+	       __io_address(REALVIEW_SCTL_BASE));
+
+	/*
+	 * Initialise to a known state (all timers off)
+	 */
+	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER3_VA_BASE + TIMER_CTRL);
+
+	writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
+	writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_VALUE);
+	writel(TIMER_DIVISOR | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC |
+	       TIMER_CTRL_IE, TIMER0_VA_BASE + TIMER_CTRL);
+
+	/* 
+	 * Make irqs happen for the system timer
+	 */
+	setup_irq(IRQ_TIMERINT0_1, &realview_timer_irq);
+}
+
+struct sys_timer realview_timer = {
+	.init		= realview_timer_init,
+	.offset		= realview_gettimeoffset,
+};
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
new file mode 100644
index 000000000000..c06e6041df41
--- /dev/null
+++ b/arch/arm/mach-realview/core.h
@@ -0,0 +1,117 @@
+/*
+ *  linux/arch/arm/mach-realview/core.h
+ *
+ *  Copyright (C) 2004 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_REALVIEW_H
+#define __ASM_ARCH_REALVIEW_H
+
+#include <asm/hardware/amba.h>
+#include <asm/leds.h>
+#include <asm/io.h>
+
+extern struct sys_timer realview_timer;
+
+#define AMBA_DEVICE(name,busid,base,plat)			\
+static struct amba_device name##_device = {			\
+	.dev		= {					\
+		.coherent_dma_mask = ~0,			\
+		.bus_id	= busid,				\
+		.platform_data = plat,				\
+	},							\
+	.res		= {					\
+		.start	= REALVIEW_##base##_BASE,		\
+		.end	= (REALVIEW_##base##_BASE) + SZ_4K - 1,\
+		.flags	= IORESOURCE_MEM,			\
+	},							\
+	.dma_mask	= ~0,					\
+	.irq		= base##_IRQ,				\
+	/* .dma		= base##_DMA,*/				\
+}
+
+/*
+ * These devices are connected via the core APB bridge
+ */
+#define GPIO2_IRQ	{ IRQ_GPIOINT2, NO_IRQ }
+#define GPIO2_DMA	{ 0, 0 }
+#define GPIO3_IRQ	{ IRQ_GPIOINT3, NO_IRQ }
+#define GPIO3_DMA	{ 0, 0 }
+
+#define AACI_IRQ	{ IRQ_AACI, NO_IRQ }
+#define AACI_DMA	{ 0x80, 0x81 }
+#define MMCI0_IRQ	{ IRQ_MMCI0A,IRQ_MMCI0B }
+#define MMCI0_DMA	{ 0x84, 0 }
+#define KMI0_IRQ	{ IRQ_KMI0, NO_IRQ }
+#define KMI0_DMA	{ 0, 0 }
+#define KMI1_IRQ	{ IRQ_KMI1, NO_IRQ }
+#define KMI1_DMA	{ 0, 0 }
+
+/*
+ * These devices are connected directly to the multi-layer AHB switch
+ */
+#define SMC_IRQ		{ NO_IRQ, NO_IRQ }
+#define SMC_DMA		{ 0, 0 }
+#define MPMC_IRQ	{ NO_IRQ, NO_IRQ }
+#define MPMC_DMA	{ 0, 0 }
+#define CLCD_IRQ	{ IRQ_CLCDINT, NO_IRQ }
+#define CLCD_DMA	{ 0, 0 }
+#define DMAC_IRQ	{ IRQ_DMAINT, NO_IRQ }
+#define DMAC_DMA	{ 0, 0 }
+
+/*
+ * These devices are connected via the core APB bridge
+ */
+#define SCTL_IRQ	{ NO_IRQ, NO_IRQ }
+#define SCTL_DMA	{ 0, 0 }
+#define WATCHDOG_IRQ	{ IRQ_WDOGINT, NO_IRQ }
+#define WATCHDOG_DMA	{ 0, 0 }
+#define GPIO0_IRQ	{ IRQ_GPIOINT0, NO_IRQ }
+#define GPIO0_DMA	{ 0, 0 }
+#define GPIO1_IRQ	{ IRQ_GPIOINT1, NO_IRQ }
+#define GPIO1_DMA	{ 0, 0 }
+#define RTC_IRQ		{ IRQ_RTCINT, NO_IRQ }
+#define RTC_DMA		{ 0, 0 }
+
+/*
+ * These devices are connected via the DMA APB bridge
+ */
+#define SCI_IRQ		{ IRQ_SCIINT, NO_IRQ }
+#define SCI_DMA		{ 7, 6 }
+#define UART0_IRQ	{ IRQ_UARTINT0, NO_IRQ }
+#define UART0_DMA	{ 15, 14 }
+#define UART1_IRQ	{ IRQ_UARTINT1, NO_IRQ }
+#define UART1_DMA	{ 13, 12 }
+#define UART2_IRQ	{ IRQ_UARTINT2, NO_IRQ }
+#define UART2_DMA	{ 11, 10 }
+#define UART3_IRQ	{ IRQ_UART3, NO_IRQ }
+#define UART3_DMA	{ 0x86, 0x87 }
+#define SSP_IRQ		{ IRQ_SSPINT, NO_IRQ }
+#define SSP_DMA		{ 9, 8 }
+
+
+extern struct platform_device realview_flash_device;
+extern struct platform_device realview_smc91x_device;
+extern struct mmc_platform_data realview_mmc0_plat_data;
+extern struct mmc_platform_data realview_mmc1_plat_data;
+extern struct clk realview_clcd_clk;
+extern struct clcd_board clcd_plat_data;
+
+extern void realview_leds_event(led_event_t ledevt);
+
+#endif
diff --git a/arch/arm/mach-realview/headsmp.S b/arch/arm/mach-realview/headsmp.S
new file mode 100644
index 000000000000..4075473cf68a
--- /dev/null
+++ b/arch/arm/mach-realview/headsmp.S
@@ -0,0 +1,39 @@
+/*
+ *  linux/arch/arm/mach-realview/headsmp.S
+ *
+ *  Copyright (c) 2003 ARM Limited
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+	__INIT
+
+/*
+ * Realview specific entry point for secondary CPUs.  This provides
+ * a "holding pen" into which all secondary cores are held until we're
+ * ready for them to initialise.
+ */
+ENTRY(realview_secondary_startup)
+	mrc	p15, 0, r0, c0, c0, 5
+	and	r0, r0, #15
+	adr	r4, 1f
+	ldmia	r4, {r5, r6}
+	sub	r4, r4, r5
+	add	r6, r6, r4
+pen:	ldr	r7, [r6]
+	cmp	r7, r0
+	bne	pen
+
+	/*
+	 * we've been released from the holding pen: secondary_stack
+	 * should now contain the SVC stack for this core
+	 */
+	b	secondary_startup
+
+1:	.long	.
+	.long	pen_release
diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c
new file mode 100644
index 000000000000..09748cbcd10e
--- /dev/null
+++ b/arch/arm/mach-realview/hotplug.c
@@ -0,0 +1,138 @@
+/*
+ *  linux/arch/arm/mach-realview/hotplug.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+#include <linux/completion.h>
+
+extern volatile int pen_release;
+
+static DECLARE_COMPLETION(cpu_killed);
+
+static inline void cpu_enter_lowpower(void)
+{
+	unsigned int v;
+
+	asm volatile(	"mcr	p15, 0, %1, c7, c14, 0\n"
+	"	mcr	p15, 0, %1, c7, c5, 0\n"
+	"	mcr	p15, 0, %1, c7, c10, 4\n"
+	/*
+	 * Turn off coherency
+	 */
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	bic	%0, %0, #0x20\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	"	mrc	p15, 0, %0, c1, c0, 0\n"
+	"	bic	%0, %0, #0x04\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	  : "=&r" (v)
+	  : "r" (0)
+	  : "cc");
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+	unsigned int v;
+
+	asm volatile(	"mrc	p15, 0, %0, c1, c0, 0\n"
+	"	orr	%0, %0, #0x04\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	orr	%0, %0, #0x20\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	  : "=&r" (v)
+	  :
+	  : "cc");
+}
+
+static inline void platform_do_lowpower(unsigned int cpu)
+{
+	/*
+	 * there is no power-control hardware on this platform, so all
+	 * we can do is put the core into WFI; this is safe as the calling
+	 * code will have already disabled interrupts
+	 */
+	for (;;) {
+		/*
+		 * here's the WFI
+		 */
+		asm(".word	0xe320f003\n"
+		    :
+		    :
+		    : "memory", "cc");
+
+		if (pen_release == cpu) {
+			/*
+			 * OK, proper wakeup, we're done
+			 */
+			break;
+		}
+
+		/*
+		 * getting here, means that we have come out of WFI without
+		 * having been woken up - this shouldn't happen
+		 *
+		 * The trouble is, letting people know about this is not really
+		 * possible, since we are currently running incoherently, and
+		 * therefore cannot safely call printk() or anything else
+		 */
+#ifdef DEBUG
+		printk("CPU%u: spurious wakeup call\n", cpu);
+#endif
+	}
+}
+
+int platform_cpu_kill(unsigned int cpu)
+{
+	return wait_for_completion_timeout(&cpu_killed, 5000);
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void platform_cpu_die(unsigned int cpu)
+{
+#ifdef DEBUG
+	unsigned int this_cpu = hard_smp_processor_id();
+
+	if (cpu != this_cpu) {
+		printk(KERN_CRIT "Eek! platform_cpu_die running on %u, should be %u\n",
+			   this_cpu, cpu);
+		BUG();
+	}
+#endif
+
+	printk(KERN_NOTICE "CPU%u: shutdown\n", cpu);
+	complete(&cpu_killed);
+
+	/*
+	 * we're ready for shutdown now, so do it
+	 */
+	cpu_enter_lowpower();
+	platform_do_lowpower(cpu);
+
+	/*
+	 * bring this CPU back into the world of cache
+	 * coherency, and then restore interrupts
+	 */
+	cpu_leave_lowpower();
+}
+
+int mach_cpu_disable(unsigned int cpu)
+{
+	/*
+	 * we don't allow CPU 0 to be shutdown (it is still too special
+	 * e.g. clock tick interrupts)
+	 */
+	return cpu == 0 ? -EPERM : 0;
+}
diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c
new file mode 100644
index 000000000000..c9d7c596b200
--- /dev/null
+++ b/arch/arm/mach-realview/localtimer.c
@@ -0,0 +1,128 @@
+/*
+ *  linux/arch/arm/mach-realview/localtimer.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+
+#include <asm/mach/time.h>
+#include <asm/hardware/arm_twd.h>
+#include <asm/hardware/gic.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#define TWD_BASE(cpu)	(__io_address(REALVIEW_TWD_BASE) + \
+			 ((cpu) * REALVIEW_TWD_SIZE))
+
+static unsigned long mpcore_timer_rate;
+
+/*
+ * local_timer_ack: checks for a local timer interrupt.
+ *
+ * If a local timer interrupt has occured, acknowledge and return 1.
+ * Otherwise, return 0.
+ */
+int local_timer_ack(void)
+{
+	void __iomem *base = TWD_BASE(smp_processor_id());
+
+	if (__raw_readl(base + TWD_TIMER_INTSTAT)) {
+		__raw_writel(1, base + TWD_TIMER_INTSTAT);
+		return 1;
+	}
+
+	return 0;
+}
+
+void __cpuinit local_timer_setup(unsigned int cpu)
+{
+	void __iomem *base = TWD_BASE(cpu);
+	unsigned int load, offset;
+	u64 waitjiffies;
+	unsigned int count;
+
+	/*
+	 * If this is the first time round, we need to work out how fast
+	 * the timer ticks
+	 */
+	if (mpcore_timer_rate == 0) {
+		printk("Calibrating local timer... ");
+
+		/* Wait for a tick to start */
+		waitjiffies = get_jiffies_64() + 1;
+
+		while (get_jiffies_64() < waitjiffies)
+			udelay(10);
+
+		/* OK, now the tick has started, let's get the timer going */
+		waitjiffies += 5;
+
+				 /* enable, no interrupt or reload */
+		__raw_writel(0x1, base + TWD_TIMER_CONTROL);
+
+				 /* maximum value */
+		__raw_writel(0xFFFFFFFFU, base + TWD_TIMER_COUNTER);
+
+		while (get_jiffies_64() < waitjiffies)
+			udelay(10);
+
+		count = __raw_readl(base + TWD_TIMER_COUNTER);
+
+		mpcore_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5);
+
+		printk("%lu.%02luMHz.\n", mpcore_timer_rate / 1000000,
+			(mpcore_timer_rate / 100000) % 100);
+	}
+
+	load = mpcore_timer_rate / HZ;
+
+	__raw_writel(load, base + TWD_TIMER_LOAD);
+	__raw_writel(0x7,  base + TWD_TIMER_CONTROL);
+
+	/*
+	 * Now maneuver our local tick into the right part of the jiffy.
+	 * Start by working out where within the tick our local timer
+	 * interrupt should go.
+	 */
+	offset = ((mpcore_timer_rate / HZ) / (NR_CPUS + 1)) * (cpu + 1);
+
+	/*
+	 * gettimeoffset() will return a number of us since the last tick.
+	 * Convert this number of us to a local timer tick count.
+	 * Be careful of integer overflow whilst keeping maximum precision.
+	 *
+	 * with HZ=100 and 1MHz (fpga) ~ 1GHz processor:
+	 * load = 1 ~ 10,000
+	 * mpcore_timer_rate/10000 = 100 ~ 100,000
+	 *
+	 * so the multiply value will be less than 10^9 always.
+	 */
+	load = (system_timer->offset() * (mpcore_timer_rate / 10000)) / 100;
+
+	/* Add on our offset to get the load value */
+	load = (load + offset) % (mpcore_timer_rate / HZ);
+
+	__raw_writel(load, base + TWD_TIMER_COUNTER);
+
+	/* Make sure our local interrupt controller has this enabled */
+	__raw_writel(1 << IRQ_LOCALTIMER,
+		     __io_address(REALVIEW_GIC_DIST_BASE) + GIC_DIST_ENABLE_SET);
+}
+
+/*
+ * take a local timer down
+ */
+void __cpuexit local_timer_stop(unsigned int cpu)
+{
+	__raw_writel(0, TWD_BASE(cpu) + TWD_TIMER_CONTROL);
+}
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
new file mode 100644
index 000000000000..a8fbd76d8be5
--- /dev/null
+++ b/arch/arm/mach-realview/platsmp.c
@@ -0,0 +1,199 @@
+/*
+ *  linux/arch/arm/mach-realview/platsmp.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+
+#include <asm/cacheflush.h>
+#include <asm/hardware/arm_scu.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+extern void realview_secondary_startup(void);
+
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen"
+ */
+volatile int __cpuinitdata pen_release = -1;
+
+static unsigned int __init get_core_count(void)
+{
+	unsigned int ncores;
+
+	ncores = __raw_readl(__io_address(REALVIEW_MPCORE_SCU_BASE) + SCU_CONFIG);
+
+	return (ncores & 0x03) + 1;
+}
+
+static DEFINE_SPINLOCK(boot_lock);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+	/*
+	 * the primary core may have used a "cross call" soft interrupt
+	 * to get this processor out of WFI in the BootMonitor - make
+	 * sure that we are no longer being sent this soft interrupt
+	 */
+	smp_cross_call_done(cpumask_of_cpu(cpu));
+
+	/*
+	 * if any interrupts are already enabled for the primary
+	 * core (e.g. timer irq), then they will not have been enabled
+	 * for us: do so
+	 */
+	gic_cpu_init(__io_address(REALVIEW_GIC_CPU_BASE));
+
+	/*
+	 * let the primary processor know we're out of the
+	 * pen, then head off into the C entry point
+	 */
+	pen_release = -1;
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long timeout;
+
+	/*
+	 * set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	spin_lock(&boot_lock);
+
+	/*
+	 * The secondary processor is waiting to be released from
+	 * the holding pen - release it, then wait for it to flag
+	 * that it has been released by resetting pen_release.
+	 *
+	 * Note that "pen_release" is the hardware CPU ID, whereas
+	 * "cpu" is Linux's internal ID.
+	 */
+	pen_release = cpu;
+	flush_cache_all();
+
+	/*
+	 * XXX
+	 *
+	 * This is a later addition to the booting protocol: the
+	 * bootMonitor now puts secondary cores into WFI, so
+	 * poke_milo() no longer gets the cores moving; we need
+	 * to send a soft interrupt to wake the secondary core.
+	 * Use smp_cross_call() for this, since there's little
+	 * point duplicating the code here
+	 */
+	smp_cross_call(cpumask_of_cpu(cpu));
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout)) {
+		if (pen_release == -1)
+			break;
+
+		udelay(10);
+	}
+
+	/*
+	 * now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	spin_unlock(&boot_lock);
+
+	return pen_release != -1 ? -ENOSYS : 0;
+}
+
+static void __init poke_milo(void)
+{
+	extern void secondary_startup(void);
+
+	/* nobody is to be released from the pen yet */
+	pen_release = -1;
+
+	/*
+	 * write the address of secondary startup into the system-wide
+	 * flags register, then clear the bottom two bits, which is what
+	 * BootMonitor is waiting for
+	 */
+#if 1
+#define REALVIEW_SYS_FLAGSS_OFFSET 0x30
+	__raw_writel(virt_to_phys(realview_secondary_startup),
+		     __io_address(REALVIEW_SYS_BASE) +
+		     REALVIEW_SYS_FLAGSS_OFFSET);
+#define REALVIEW_SYS_FLAGSC_OFFSET 0x34
+	__raw_writel(3,
+		     __io_address(REALVIEW_SYS_BASE) +
+		     REALVIEW_SYS_FLAGSC_OFFSET);
+#endif
+
+	mb();
+}
+
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+	unsigned int ncores = get_core_count();
+	unsigned int cpu = smp_processor_id();
+	int i;
+
+	/* sanity check */
+	if (ncores == 0) {
+		printk(KERN_ERR
+		       "Realview: strange CM count of 0? Default to 1\n");
+
+		ncores = 1;
+	}
+
+	if (ncores > NR_CPUS) {
+		printk(KERN_WARNING
+		       "Realview: no. of cores (%d) greater than configured "
+		       "maximum of %d - clipping\n",
+		       ncores, NR_CPUS);
+		ncores = NR_CPUS;
+	}
+
+	smp_store_cpu_info(cpu);
+
+	/*
+	 * are we trying to boot more cores than exist?
+	 */
+	if (max_cpus > ncores)
+		max_cpus = ncores;
+
+	/*
+	 * Enable the local timer for primary CPU
+	 */
+	local_timer_setup(cpu);
+
+	/*
+	 * Initialise the possible/present maps.
+	 * cpu_possible_map describes the set of CPUs which may be present
+	 * cpu_present_map describes the set of CPUs populated
+	 */
+	for (i = 0; i < max_cpus; i++) {
+		cpu_set(i, cpu_possible_map);
+		cpu_set(i, cpu_present_map);
+	}
+
+	/*
+	 * Do we need any more CPUs? If so, then let them know where
+	 * to start. Note that, on modern versions of MILO, the "poke"
+	 * doesn't actually do anything until each individual core is
+	 * sent a soft interrupt to get it out of WFI
+	 */
+	if (max_cpus > 1)
+		poke_milo();
+}
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
new file mode 100644
index 000000000000..7dc32503fdf2
--- /dev/null
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -0,0 +1,177 @@
+/*
+ *  linux/arch/arm/mach-realview/realview_eb.c
+ *
+ *  Copyright (C) 2004 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/leds.h>
+#include <asm/mach-types.h>
+#include <asm/hardware/gic.h>
+#include <asm/hardware/amba.h>
+#include <asm/hardware/icst307.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/mmc.h>
+
+#include <asm/arch/irqs.h>
+
+#include "core.h"
+#include "clock.h"
+
+static struct map_desc realview_eb_io_desc[] __initdata = {
+	{
+		.virtual	= IO_ADDRESS(REALVIEW_SYS_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_SYS_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_GIC_CPU_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_GIC_CPU_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_GIC_DIST_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_GIC_DIST_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_SCTL_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_TIMER0_1_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_TIMER0_1_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_TIMER2_3_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_TIMER2_3_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+#ifdef CONFIG_DEBUG_LL
+	{
+		.virtual	= IO_ADDRESS(REALVIEW_UART0_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_UART0_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}
+#endif
+};
+
+static void __init realview_eb_map_io(void)
+{
+	iotable_init(realview_eb_io_desc, ARRAY_SIZE(realview_eb_io_desc));
+}
+
+/* FPGA Primecells */
+AMBA_DEVICE(aaci,  "fpga:04", AACI,     NULL);
+AMBA_DEVICE(mmc0,  "fpga:05", MMCI0,    &realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0,  "fpga:06", KMI0,     NULL);
+AMBA_DEVICE(kmi1,  "fpga:07", KMI1,     NULL);
+AMBA_DEVICE(uart3, "fpga:09", UART3,    NULL);
+
+/* DevChip Primecells */
+AMBA_DEVICE(smc,   "dev:00",  SMC,      NULL);
+AMBA_DEVICE(clcd,  "dev:20",  CLCD,     &clcd_plat_data);
+AMBA_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
+AMBA_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
+AMBA_DEVICE(wdog,  "dev:e1",  WATCHDOG, NULL);
+AMBA_DEVICE(gpio0, "dev:e4",  GPIO0,    NULL);
+AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    NULL);
+AMBA_DEVICE(gpio2, "dev:e6",  GPIO2,    NULL);
+AMBA_DEVICE(rtc,   "dev:e8",  RTC,      NULL);
+AMBA_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
+AMBA_DEVICE(uart0, "dev:f1",  UART0,    NULL);
+AMBA_DEVICE(uart1, "dev:f2",  UART1,    NULL);
+AMBA_DEVICE(uart2, "dev:f3",  UART2,    NULL);
+AMBA_DEVICE(ssp0,  "dev:f4",  SSP,      NULL);
+
+static struct amba_device *amba_devs[] __initdata = {
+	&dmac_device,
+	&uart0_device,
+	&uart1_device,
+	&uart2_device,
+	&uart3_device,
+	&smc_device,
+	&clcd_device,
+	&sctl_device,
+	&wdog_device,
+	&gpio0_device,
+	&gpio1_device,
+	&gpio2_device,
+	&rtc_device,
+	&sci0_device,
+	&ssp0_device,
+	&aaci_device,
+	&mmc0_device,
+	&kmi0_device,
+	&kmi1_device,
+};
+
+static void __init gic_init_irq(void)
+{
+#ifdef CONFIG_REALVIEW_MPCORE
+	writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK));
+	writel(0x008003c0, __io_address(REALVIEW_SYS_BASE) + 0xd8);
+	writel(0x00000000, __io_address(REALVIEW_SYS_LOCK));
+#endif
+	gic_dist_init(__io_address(REALVIEW_GIC_DIST_BASE));
+	gic_cpu_init(__io_address(REALVIEW_GIC_CPU_BASE));
+}
+
+static void __init realview_eb_init(void)
+{
+	int i;
+
+	clk_register(&realview_clcd_clk);
+
+	platform_device_register(&realview_flash_device);
+	platform_device_register(&realview_smc91x_device);
+
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+		struct amba_device *d = amba_devs[i];
+		amba_device_register(d, &iomem_resource);
+	}
+
+#ifdef CONFIG_LEDS
+	leds_event = realview_leds_event;
+#endif
+}
+
+MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
+	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
+	.phys_ram	= 0x00000000,
+	.phys_io	= REALVIEW_UART0_BASE,
+	.io_pg_offst	= (IO_ADDRESS(REALVIEW_UART0_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.map_io		= realview_eb_map_io,
+	.init_irq	= gic_init_irq,
+	.timer		= &realview_timer,
+	.init_machine	= realview_eb_init,
+MACHINE_END
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
index e3587efec4bf..5c4ac1c008a6 100644
--- a/arch/arm/mach-rpc/riscpc.c
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -61,9 +61,22 @@ static int __init parse_tag_acorn(const struct tag *tag)
 __tagtable(ATAG_ACORN, parse_tag_acorn);
 
 static struct map_desc rpc_io_desc[] __initdata = {
- { SCREEN_BASE,	SCREEN_START,	2*1048576, MT_DEVICE }, /* VRAM		*/
- { (u32)IO_BASE, IO_START,	IO_SIZE	 , MT_DEVICE }, /* IO space	*/
- { EASI_BASE,	EASI_START,	EASI_SIZE, MT_DEVICE }  /* EASI space	*/
+ 	{	/* VRAM		*/
+		.virtual	=  SCREEN_BASE,
+		.pfn		= __phys_to_pfn(SCREEN_START),
+		.length		= 	2*1048576,
+		.type		= MT_DEVICE
+	}, {	/* IO space	*/
+		.virtual	=  (u32)IO_BASE,
+		.pfn		= __phys_to_pfn(IO_START),
+		.length		= 	IO_SIZE	 ,
+		.type		= MT_DEVICE
+	}, {	/* EASI space	*/
+		.virtual	= EASI_BASE,
+		.pfn		= __phys_to_pfn(EASI_START),
+		.length		= EASI_SIZE,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init rpc_map_io(void)
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 06807c6ee68a..0b9d7ca49ec1 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -12,6 +12,7 @@ config MACH_ANUBIS
 config ARCH_BAST
 	bool "Simtec Electronics BAST (EB2410ITX)"
 	select CPU_S3C2410
+	select ISA
 	help
 	  Say Y here if you are using the Simtec Electronics EB2410ITX
 	  development board (also known as BAST)
@@ -120,6 +121,14 @@ config S3C2410_BOOT_WATCHDOG
 	  system resets depends on the value of PCLK. The timeout on an
 	  200MHz s3c2410 should be about 30 seconds.
 
+config S3C2410_BOOT_ERROR_RESET
+	bool "S3C2410 Reboot on decompression error"
+	depends on ARCH_S3C2410
+	help
+	  Say y here to use the watchdog to reset the system if the
+	  kernel decompressor detects an error during decompression.
+
+
 comment "S3C2410 Setup"
 
 config S3C2410_DMA
diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c
index f59608268751..82e8253b1fa0 100644
--- a/arch/arm/mach-s3c2410/clock.c
+++ b/arch/arm/mach-s3c2410/clock.c
@@ -32,7 +32,7 @@
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/sysdev.h>
 
 #include <linux/interrupt.h>
@@ -98,7 +98,10 @@ struct clk *clk_get(struct device *dev, const char *id)
 	struct clk *clk = ERR_PTR(-ENOENT);
 	int idno;
 
-	idno = (dev == NULL) ? -1 : to_platform_device(dev)->id;
+	if (dev == NULL || dev->bus != &platform_bus_type)
+		idno = -1;
+	else
+		idno = to_platform_device(dev)->id;
 
 	down(&clocks_sem);
 
diff --git a/arch/arm/mach-s3c2410/cpu.c b/arch/arm/mach-s3c2410/cpu.c
index ca366e9e264d..687fe371369d 100644
--- a/arch/arm/mach-s3c2410/cpu.c
+++ b/arch/arm/mach-s3c2410/cpu.c
@@ -26,7 +26,7 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
diff --git a/arch/arm/mach-s3c2410/cpu.h b/arch/arm/mach-s3c2410/cpu.h
index 478c15c0e36a..9cbe5eef492b 100644
--- a/arch/arm/mach-s3c2410/cpu.h
+++ b/arch/arm/mach-s3c2410/cpu.h
@@ -21,7 +21,7 @@
 
 /* todo - fix when rmk changes iodescs to use `void __iomem *` */
 
-#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, S3C2410_PA_##x, S3C24XX_SZ_##x, MT_DEVICE }
+#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C2410_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
 
 #ifndef MHZ
 #define MHZ (1000*1000)
diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/mach-s3c2410/devs.c
index 0077937a7ab8..f58406e6ef5a 100644
--- a/arch/arm/mach-s3c2410/devs.c
+++ b/arch/arm/mach-s3c2410/devs.c
@@ -24,7 +24,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -47,7 +47,7 @@ struct platform_device *s3c24xx_uart_devs[3];
 static struct resource s3c_usb_resource[] = {
 	[0] = {
 		.start = S3C2410_PA_USBHOST,
-		.end   = S3C2410_PA_USBHOST + S3C24XX_SZ_USBHOST,
+		.end   = S3C2410_PA_USBHOST + S3C24XX_SZ_USBHOST - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -77,7 +77,7 @@ EXPORT_SYMBOL(s3c_device_usb);
 static struct resource s3c_lcd_resource[] = {
 	[0] = {
 		.start = S3C2410_PA_LCD,
-		.end   = S3C2410_PA_LCD + S3C24XX_SZ_LCD,
+		.end   = S3C2410_PA_LCD + S3C24XX_SZ_LCD - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -103,21 +103,25 @@ struct platform_device s3c_device_lcd = {
 
 EXPORT_SYMBOL(s3c_device_lcd);
 
-static struct s3c2410fb_mach_info s3c2410fb_info;
-
-void __init set_s3c2410fb_info(struct s3c2410fb_mach_info *hard_s3c2410fb_info)
+void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
 {
-	memcpy(&s3c2410fb_info,hard_s3c2410fb_info,sizeof(struct s3c2410fb_mach_info));
-	s3c_device_lcd.dev.platform_data = &s3c2410fb_info;
+	struct s3c2410fb_mach_info *npd;
+
+	npd = kmalloc(sizeof(*npd), GFP_KERNEL);
+	if (npd) {
+		memcpy(npd, pd, sizeof(*npd));
+		s3c_device_lcd.dev.platform_data = npd;
+	} else {
+		printk(KERN_ERR "no memory for LCD platform data\n");
+	}
 }
-EXPORT_SYMBOL(set_s3c2410fb_info);
 
 /* NAND Controller */
 
 static struct resource s3c_nand_resource[] = {
 	[0] = {
 		.start = S3C2410_PA_NAND,
-		.end   = S3C2410_PA_NAND + S3C24XX_SZ_NAND,
+		.end   = S3C2410_PA_NAND + S3C24XX_SZ_NAND - 1,
 		.flags = IORESOURCE_MEM,
 	}
 };
@@ -136,7 +140,7 @@ EXPORT_SYMBOL(s3c_device_nand);
 static struct resource s3c_usbgadget_resource[] = {
 	[0] = {
 		.start = S3C2410_PA_USBDEV,
-		.end   = S3C2410_PA_USBDEV + S3C24XX_SZ_USBDEV,
+		.end   = S3C2410_PA_USBDEV + S3C24XX_SZ_USBDEV - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -161,7 +165,7 @@ EXPORT_SYMBOL(s3c_device_usbgadget);
 static struct resource s3c_wdt_resource[] = {
 	[0] = {
 		.start = S3C2410_PA_WATCHDOG,
-		.end   = S3C2410_PA_WATCHDOG + S3C24XX_SZ_WATCHDOG,
+		.end   = S3C2410_PA_WATCHDOG + S3C24XX_SZ_WATCHDOG - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -186,7 +190,7 @@ EXPORT_SYMBOL(s3c_device_wdt);
 static struct resource s3c_i2c_resource[] = {
 	[0] = {
 		.start = S3C2410_PA_IIC,
-		.end   = S3C2410_PA_IIC + S3C24XX_SZ_IIC,
+		.end   = S3C2410_PA_IIC + S3C24XX_SZ_IIC - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -211,7 +215,7 @@ EXPORT_SYMBOL(s3c_device_i2c);
 static struct resource s3c_iis_resource[] = {
 	[0] = {
 		.start = S3C2410_PA_IIS,
-		.end   = S3C2410_PA_IIS + S3C24XX_SZ_IIS,
+		.end   = S3C2410_PA_IIS + S3C24XX_SZ_IIS -1,
 		.flags = IORESOURCE_MEM,
 	}
 };
@@ -265,7 +269,7 @@ EXPORT_SYMBOL(s3c_device_rtc);
 static struct resource s3c_adc_resource[] = {
 	[0] = {
 		.start = S3C2410_PA_ADC,
-		.end   = S3C2410_PA_ADC + S3C24XX_SZ_ADC,
+		.end   = S3C2410_PA_ADC + S3C24XX_SZ_ADC - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -288,7 +292,7 @@ struct platform_device s3c_device_adc = {
 static struct resource s3c_sdi_resource[] = {
 	[0] = {
 		.start = S3C2410_PA_SDI,
-		.end   = S3C2410_PA_SDI + S3C24XX_SZ_SDI,
+		.end   = S3C2410_PA_SDI + S3C24XX_SZ_SDI - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -465,7 +469,7 @@ EXPORT_SYMBOL(s3c_device_timer3);
 static struct resource s3c_camif_resource[] = {
 	[0] = {
 		.start = S3C2440_PA_CAMIF,
-		.end   = S3C2440_PA_CAMIF + S3C2440_SZ_CAMIF,
+		.end   = S3C2440_PA_CAMIF + S3C2440_SZ_CAMIF - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
diff --git a/arch/arm/mach-s3c2410/devs.h b/arch/arm/mach-s3c2410/devs.h
index d6328f96728b..52c4bab5c761 100644
--- a/arch/arm/mach-s3c2410/devs.h
+++ b/arch/arm/mach-s3c2410/devs.h
@@ -15,6 +15,7 @@
  *	10-Feb-2005 BJD	 Added camera from guillaume.gourat@nexvision.tv
 */
 #include <linux/config.h>
+#include <linux/platform_device.h>
 
 extern struct platform_device *s3c24xx_uart_devs[];
 
diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
index 94f1776cf312..23ea3d5fa09c 100644
--- a/arch/arm/mach-s3c2410/gpio.c
+++ b/arch/arm/mach-s3c2410/gpio.c
@@ -30,6 +30,7 @@
  *	04-Oct-2004  BJD  Added irq filter controls for GPIO
  *	05-Nov-2004  BJD  EXPORT_SYMBOL() added for all code
  *	13-Mar-2005  BJD  Updates for __iomem
+ *	26-Oct-2005  BJD  Added generic configuration types
  */
 
 
@@ -58,6 +59,27 @@ void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function)
 		mask = 3 << S3C2410_GPIO_OFFSET(pin)*2;
 	}
 
+	switch (function) {
+	case S3C2410_GPIO_LEAVE:
+		mask = 0;
+		function = 0;
+		break;
+
+	case S3C2410_GPIO_INPUT:
+	case S3C2410_GPIO_OUTPUT:
+	case S3C2410_GPIO_SFN2:
+	case S3C2410_GPIO_SFN3:
+		if (pin < S3C2410_GPIO_BANKB) {
+			function &= 1;
+			function <<= S3C2410_GPIO_OFFSET(pin);
+		} else {
+			function &= 3;
+			function <<= S3C2410_GPIO_OFFSET(pin)*2;
+		}
+	}
+
+	/* modify the specified register wwith IRQs off */
+
 	local_irq_save(flags);
 
 	con  = __raw_readl(base + 0x00);
diff --git a/arch/arm/mach-s3c2410/mach-anubis.c b/arch/arm/mach-s3c2410/mach-anubis.c
index 7c05f27fe1d6..0f81fc0c2f7f 100644
--- a/arch/arm/mach-s3c2410/mach-anubis.c
+++ b/arch/arm/mach-s3c2410/mach-anubis.c
@@ -21,7 +21,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -56,8 +56,16 @@
 static struct map_desc anubis_iodesc[] __initdata = {
   /* ISA IO areas */
 
-  { (u32)S3C24XX_VA_ISA_BYTE, 0x0,	   SZ_16M, MT_DEVICE },
-  { (u32)S3C24XX_VA_ISA_WORD, 0x0,	   SZ_16M, MT_DEVICE },
+  {
+	.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
+	.pfn		= __phys_to_pfn(0x0),
+	.length		= SZ_4M,
+	.type		= MT_DEVICE
+  }, {
+	.virtual	= (u32)S3C24XX_VA_ISA_WORD,
+	.pfn		= __phys_to_pfn(0x0),
+	.length 	= SZ_4M, MT_DEVICE
+  },
 
   /* we could possibly compress the next set down into a set of smaller tables
    * pagetables, but that would mean using an L2 section, and it still means
@@ -66,16 +74,41 @@ static struct map_desc anubis_iodesc[] __initdata = {
 
   /* CPLD control registers */
 
-  { (u32)ANUBIS_VA_CTRL1,	ANUBIS_PA_CTRL1,	SZ_4K, MT_DEVICE },
-  { (u32)ANUBIS_VA_CTRL2,	ANUBIS_PA_CTRL2,	SZ_4K, MT_DEVICE },
+  {
+	.virtual	= (u32)ANUBIS_VA_CTRL1,
+	.pfn		= __phys_to_pfn(ANUBIS_PA_CTRL1),
+	.length		= SZ_4K,
+	.type		= MT_DEVICE
+  }, {
+	.virtual	= (u32)ANUBIS_VA_CTRL2,
+	.pfn		= __phys_to_pfn(ANUBIS_PA_CTRL2),
+	.length		= SZ_4K,
+	.type		=MT_DEVICE
+  },
 
   /* IDE drives */
 
-  { (u32)ANUBIS_IDEPRI,		S3C2410_CS3,		SZ_1M, MT_DEVICE },
-  { (u32)ANUBIS_IDEPRIAUX,	S3C2410_CS3+(1<<26),	SZ_1M, MT_DEVICE },
-
-  { (u32)ANUBIS_IDESEC,		S3C2410_CS4,		SZ_1M, MT_DEVICE },
-  { (u32)ANUBIS_IDESECAUX,	S3C2410_CS4+(1<<26),	SZ_1M, MT_DEVICE },
+  {
+	.virtual	= (u32)ANUBIS_IDEPRI,
+	.pfn		= __phys_to_pfn(S3C2410_CS3),
+	.length		= SZ_1M,
+	.type		= MT_DEVICE
+  }, {
+	.virtual	= (u32)ANUBIS_IDEPRIAUX,
+	.pfn		= __phys_to_pfn(S3C2410_CS3+(1<<26)),
+	.length		= SZ_1M,
+	.type		= MT_DEVICE
+  }, {
+	.virtual	= (u32)ANUBIS_IDESEC,
+	.pfn		= __phys_to_pfn(S3C2410_CS4),
+	.length		= SZ_1M,
+	.type		= MT_DEVICE
+  }, {
+	.virtual	= (u32)ANUBIS_IDESECAUX,
+	.pfn		= __phys_to_pfn(S3C2410_CS4+(1<<26)),
+	.length		= SZ_1M,
+	.type		= MT_DEVICE
+  },
 };
 
 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
@@ -125,7 +158,7 @@ static int external_map[]   = { 2 };
 static int chip0_map[]      = { 0 };
 static int chip1_map[]      = { 1 };
 
-struct mtd_partition anubis_default_nand_part[] = {
+static struct mtd_partition anubis_default_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_16K,
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index ed1f07d7252f..4d962717fdf7 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -32,6 +32,7 @@
  *     25-Jul-2005 BJD  Removed ASIX static mappings
  *     27-Jul-2005 BJD  Ensure maximum frequency of i2c bus
  *     20-Sep-2005 BJD  Added static to non-exported items
+ *     26-Oct-2005 BJD  Added FB platform data
 */
 
 #include <linux/kernel.h>
@@ -40,7 +41,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/dm9000.h>
 
 #include <asm/mach/arch.h>
@@ -61,8 +62,10 @@
 #include <asm/arch/regs-gpio.h>
 #include <asm/arch/regs-mem.h>
 #include <asm/arch/regs-lcd.h>
+
 #include <asm/arch/nand.h>
 #include <asm/arch/iic.h>
+#include <asm/arch/fb.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -86,32 +89,63 @@
 
 /* macros to modify the physical addresses for io space */
 
-#define PA_CS2(item) ((item) + S3C2410_CS2)
-#define PA_CS3(item) ((item) + S3C2410_CS3)
-#define PA_CS4(item) ((item) + S3C2410_CS4)
-#define PA_CS5(item) ((item) + S3C2410_CS5)
+#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2))
+#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3))
+#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4))
+#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5))
 
 static struct map_desc bast_iodesc[] __initdata = {
   /* ISA IO areas */
-
-  { (u32)S3C24XX_VA_ISA_BYTE, PA_CS2(BAST_PA_ISAIO),   SZ_16M, MT_DEVICE },
-  { (u32)S3C24XX_VA_ISA_WORD, PA_CS3(BAST_PA_ISAIO),   SZ_16M, MT_DEVICE },
-
-  /* we could possibly compress the next set down into a set of smaller tables
-   * pagetables, but that would mean using an L2 section, and it still means
-   * we cannot actually feed the same register to an LDR due to 16K spacing
-   */
-
+  {
+	  .virtual	= (u32)S3C24XX_VA_ISA_BYTE,
+	  .pfn		= PA_CS2(BAST_PA_ISAIO),
+	  .length	= SZ_16M,
+	  .type		= MT_DEVICE,
+  }, {
+	  .virtual	= (u32)S3C24XX_VA_ISA_WORD,
+	  .pfn		= PA_CS3(BAST_PA_ISAIO),
+	  .length	= SZ_16M,
+	  .type		= MT_DEVICE,
+  },
   /* bast CPLD control registers, and external interrupt controls */
-  { (u32)BAST_VA_CTRL1, BAST_PA_CTRL1,		   SZ_1M, MT_DEVICE },
-  { (u32)BAST_VA_CTRL2, BAST_PA_CTRL2,		   SZ_1M, MT_DEVICE },
-  { (u32)BAST_VA_CTRL3, BAST_PA_CTRL3,		   SZ_1M, MT_DEVICE },
-  { (u32)BAST_VA_CTRL4, BAST_PA_CTRL4,		   SZ_1M, MT_DEVICE },
-
+  {
+	  .virtual	= (u32)BAST_VA_CTRL1,
+	  .pfn		= __phys_to_pfn(BAST_PA_CTRL1),
+	  .length	= SZ_1M,
+	  .type		= MT_DEVICE,
+  }, {
+	  .virtual	= (u32)BAST_VA_CTRL2,
+	  .pfn		= __phys_to_pfn(BAST_PA_CTRL2),
+	  .length	= SZ_1M,
+	  .type		= MT_DEVICE,
+  }, {
+	  .virtual	= (u32)BAST_VA_CTRL3,
+	  .pfn		= __phys_to_pfn(BAST_PA_CTRL3),
+	  .length	= SZ_1M,
+	  .type		= MT_DEVICE,
+  }, {
+	  .virtual	= (u32)BAST_VA_CTRL4,
+	  .pfn		= __phys_to_pfn(BAST_PA_CTRL4),
+	  .length	= SZ_1M,
+	  .type		= MT_DEVICE,
+  },
   /* PC104 IRQ mux */
-  { (u32)BAST_VA_PC104_IRQREQ,  BAST_PA_PC104_IRQREQ,   SZ_1M, MT_DEVICE },
-  { (u32)BAST_VA_PC104_IRQRAW,  BAST_PA_PC104_IRQRAW,   SZ_1M, MT_DEVICE },
-  { (u32)BAST_VA_PC104_IRQMASK, BAST_PA_PC104_IRQMASK,  SZ_1M, MT_DEVICE },
+  {
+	  .virtual	= (u32)BAST_VA_PC104_IRQREQ,
+	  .pfn		= __phys_to_pfn(BAST_PA_PC104_IRQREQ),
+	  .length	= SZ_1M,
+	  .type		= MT_DEVICE,
+  }, {
+	  .virtual	= (u32)BAST_VA_PC104_IRQRAW,
+	  .pfn		= __phys_to_pfn(BAST_PA_PC104_IRQRAW),
+	  .length	= SZ_1M,
+	  .type		= MT_DEVICE,
+  }, {
+	  .virtual	= (u32)BAST_VA_PC104_IRQMASK,
+	  .pfn		= __phys_to_pfn(BAST_PA_PC104_IRQMASK),
+	  .length	= SZ_1M,
+	  .type		= MT_DEVICE,
+  },
 
   /* peripheral space... one for each of fast/slow/byte/16bit */
   /* note, ide is only decoded in word space, even though some registers
@@ -169,7 +203,7 @@ static struct s3c24xx_uart_clksrc bast_serial_clocks[] = {
 		.name		= "pclk",
 		.divisor	= 1,
 		.min_baud	= 0,
-		.max_baud	= 0.
+		.max_baud	= 0,
 	}
 };
 
@@ -182,7 +216,7 @@ static struct s3c2410_uartcfg bast_uartcfgs[] = {
 		.ulcon	     = ULCON,
 		.ufcon	     = UFCON,
 		.clocks	     = bast_serial_clocks,
-		.clocks_size = ARRAY_SIZE(bast_serial_clocks)
+		.clocks_size = ARRAY_SIZE(bast_serial_clocks),
 	},
 	[1] = {
 		.hwport	     = 1,
@@ -191,7 +225,7 @@ static struct s3c2410_uartcfg bast_uartcfgs[] = {
 		.ulcon	     = ULCON,
 		.ufcon	     = UFCON,
 		.clocks	     = bast_serial_clocks,
-		.clocks_size = ARRAY_SIZE(bast_serial_clocks)
+		.clocks_size = ARRAY_SIZE(bast_serial_clocks),
 	},
 	/* port 2 is not actually used */
 	[2] = {
@@ -201,7 +235,7 @@ static struct s3c2410_uartcfg bast_uartcfgs[] = {
 		.ulcon	     = ULCON,
 		.ufcon	     = UFCON,
 		.clocks	     = bast_serial_clocks,
-		.clocks_size = ARRAY_SIZE(bast_serial_clocks)
+		.clocks_size = ARRAY_SIZE(bast_serial_clocks),
 	}
 };
 
@@ -230,11 +264,11 @@ static int chip0_map[] = { 1 };
 static int chip1_map[] = { 2 };
 static int chip2_map[] = { 3 };
 
-struct mtd_partition bast_default_nand_part[] = {
+static struct mtd_partition bast_default_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_16K,
-		.offset	= 0
+		.offset	= 0,
 	},
 	[1] = {
 		.name	= "/boot",
@@ -262,28 +296,28 @@ static struct s3c2410_nand_set bast_nand_sets[] = {
 		.nr_chips	= 1,
 		.nr_map		= smartmedia_map,
 		.nr_partitions	= ARRAY_SIZE(bast_default_nand_part),
-		.partitions	= bast_default_nand_part
+		.partitions	= bast_default_nand_part,
 	},
 	[1] = {
 		.name		= "chip0",
 		.nr_chips	= 1,
 		.nr_map		= chip0_map,
 		.nr_partitions	= ARRAY_SIZE(bast_default_nand_part),
-		.partitions	= bast_default_nand_part
+		.partitions	= bast_default_nand_part,
 	},
 	[2] = {
 		.name		= "chip1",
 		.nr_chips	= 1,
 		.nr_map		= chip1_map,
 		.nr_partitions	= ARRAY_SIZE(bast_default_nand_part),
-		.partitions	= bast_default_nand_part
+		.partitions	= bast_default_nand_part,
 	},
 	[3] = {
 		.name		= "chip2",
 		.nr_chips	= 1,
 		.nr_map		= chip2_map,
 		.nr_partitions	= ARRAY_SIZE(bast_default_nand_part),
-		.partitions	= bast_default_nand_part
+		.partitions	= bast_default_nand_part,
 	}
 };
 
@@ -307,9 +341,9 @@ static void bast_nand_select(struct s3c2410_nand_set *set, int slot)
 }
 
 static struct s3c2410_platform_nand bast_nand_info = {
-	.tacls		= 40,
-	.twrph0		= 80,
-	.twrph1		= 80,
+	.tacls		= 30,
+	.twrph0		= 60,
+	.twrph1		= 60,
 	.nr_sets	= ARRAY_SIZE(bast_nand_sets),
 	.sets		= bast_nand_sets,
 	.select_chip	= bast_nand_select,
@@ -321,17 +355,17 @@ static struct resource bast_dm9k_resource[] = {
 	[0] = {
 		.start = S3C2410_CS5 + BAST_PA_DM9000,
 		.end   = S3C2410_CS5 + BAST_PA_DM9000 + 3,
-		.flags = IORESOURCE_MEM
+		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
 		.start = S3C2410_CS5 + BAST_PA_DM9000 + 0x40,
 		.end   = S3C2410_CS5 + BAST_PA_DM9000 + 0x40 + 0x3f,
-		.flags = IORESOURCE_MEM
+		.flags = IORESOURCE_MEM,
 	},
 	[2] = {
 		.start = IRQ_DM9000,
 		.end   = IRQ_DM9000,
-		.flags = IORESOURCE_IRQ
+		.flags = IORESOURCE_IRQ,
 	}
 
 };
@@ -340,8 +374,8 @@ static struct resource bast_dm9k_resource[] = {
  * better IO routines can be written and tested
 */
 
-struct dm9000_plat_data bast_dm9k_platdata = {
-	.flags		= DM9000_PLATF_16BITONLY
+static struct dm9000_plat_data bast_dm9k_platdata = {
+	.flags		= DM9000_PLATF_16BITONLY,
 };
 
 static struct platform_device bast_device_dm9k = {
@@ -399,6 +433,38 @@ static struct s3c2410_platform_i2c bast_i2c_info = {
 	.max_freq	= 130*1000,
 };
 
+
+static struct s3c2410fb_mach_info __initdata bast_lcd_info = {
+	.width		= 640,
+	.height		= 480,
+
+	.xres		= {
+		.min		= 320,
+		.max		= 1024,
+		.defval		= 640,
+	},
+
+	.yres		= {
+		.min		= 240,
+		.max	        = 600,
+		.defval		= 480,
+	},
+
+	.bpp		= {
+		.min		= 4,
+		.max		= 16,
+		.defval		= 8,
+	},
+
+	.regs		= {
+		.lcdcon1	= 0x00000176,
+		.lcdcon2	= 0x1d77c7c2,
+		.lcdcon3	= 0x013a7f13,
+		.lcdcon4	= 0x00000057,
+		.lcdcon5	= 0x00014b02,
+	}
+};
+
 /* Standard BAST devices */
 
 static struct platform_device *bast_devices[] __initdata = {
@@ -426,7 +492,7 @@ static struct s3c24xx_board bast_board __initdata = {
 	.devices       = bast_devices,
 	.devices_count = ARRAY_SIZE(bast_devices),
 	.clocks	       = bast_clocks,
-	.clocks_count  = ARRAY_SIZE(bast_clocks)
+	.clocks_count  = ARRAY_SIZE(bast_clocks),
 };
 
 static void __init bast_map_io(void)
@@ -454,6 +520,10 @@ static void __init bast_map_io(void)
 	usb_simtec_init();
 }
 
+static void __init bast_init(void)
+{
+	s3c24xx_fb_set_platdata(&bast_lcd_info);
+}
 
 MACHINE_START(BAST, "Simtec-BAST")
 	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
@@ -463,5 +533,6 @@ MACHINE_START(BAST, "Simtec-BAST")
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= bast_map_io,
 	.init_irq	= s3c24xx_init_irq,
+	.init_machine	= bast_init,
 	.timer		= &s3c24xx_timer,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index fb3cb01266e5..0aa8760598f7 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -25,6 +25,7 @@
  *     14-Jan-2005 BJD  Added clock init
  *     10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
  *     20-Sep-2005 BJD  Added static to non-exported items
+ *     26-Oct-2005 BJD  Changed name of fb init call
 */
 
 #include <linux/kernel.h>
@@ -33,6 +34,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/platform_device.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -164,7 +166,7 @@ static void __init h1940_init_irq(void)
 
 static void __init h1940_init(void)
 {
-	set_s3c2410fb_info(&h1940_lcdcfg);
+	s3c24xx_fb_set_platdata(&h1940_lcdcfg);
 }
 
 MACHINE_START(H1940, "IPAQ-H1940")
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 5c0f2b091f95..378d640ab00b 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -20,7 +20,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/delay.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/kthread.h>
 
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-s3c2410/mach-nexcoder.c b/arch/arm/mach-s3c2410/mach-nexcoder.c
index c22f8216032d..42b0eeff2e0f 100644
--- a/arch/arm/mach-s3c2410/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2410/mach-nexcoder.c
@@ -19,7 +19,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/string.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <linux/mtd/map.h>
 
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index ad1459e402e2..a2eb9ed48fcd 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -15,7 +15,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-s3c2410/mach-rx3715.c b/arch/arm/mach-s3c2410/mach-rx3715.c
index 22d9e070fd68..f8d86d1e16b6 100644
--- a/arch/arm/mach-s3c2410/mach-rx3715.c
+++ b/arch/arm/mach-s3c2410/mach-rx3715.c
@@ -17,6 +17,7 @@
  *	10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
  *	14-Mar-2005 BJD  Fixed __iomem warnings
  *	20-Sep-2005 BJD  Added static to non-exported items
+ *	31-Oct-2005 BJD  Added LCD setup for framebuffer
 */
 
 #include <linux/kernel.h>
@@ -27,6 +28,7 @@
 #include <linux/init.h>
 #include <linux/tty.h>
 #include <linux/console.h>
+#include <linux/platform_device.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
 
@@ -42,6 +44,9 @@
 
 #include <asm/arch/regs-serial.h>
 #include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-lcd.h>
+
+#include <asm/arch/fb.h>
 
 #include "clock.h"
 #include "devs.h"
@@ -51,8 +56,17 @@
 static struct map_desc rx3715_iodesc[] __initdata = {
 	/* dump ISA space somewhere unused */
 
-	{ (u32)S3C24XX_VA_ISA_WORD, S3C2410_CS3, SZ_16M, MT_DEVICE },
-	{ (u32)S3C24XX_VA_ISA_BYTE, S3C2410_CS3, SZ_16M, MT_DEVICE },
+	{
+		.virtual	= (u32)S3C24XX_VA_ISA_WORD,
+		.pfn		= __phys_to_pfn(S3C2410_CS3),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
+		.pfn		= __phys_to_pfn(S3C2410_CS3),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE,
+	},
 };
 
 
@@ -96,6 +110,66 @@ static struct s3c2410_uartcfg rx3715_uartcfgs[] = {
 	}
 };
 
+/* framebuffer lcd controller information */
+
+static struct s3c2410fb_mach_info rx3715_lcdcfg __initdata = {
+	.regs	= {
+		.lcdcon1 =	S3C2410_LCDCON1_TFT16BPP | \
+				S3C2410_LCDCON1_TFT | \
+				S3C2410_LCDCON1_CLKVAL(0x0C),
+
+		.lcdcon2 =	S3C2410_LCDCON2_VBPD(5) | \
+				S3C2410_LCDCON2_LINEVAL(319) | \
+				S3C2410_LCDCON2_VFPD(6) | \
+				S3C2410_LCDCON2_VSPW(2),
+
+		.lcdcon3 =	S3C2410_LCDCON3_HBPD(35) | \
+				S3C2410_LCDCON3_HOZVAL(239) | \
+				S3C2410_LCDCON3_HFPD(35),
+
+		.lcdcon4 =	S3C2410_LCDCON4_MVAL(0) | \
+				S3C2410_LCDCON4_HSPW(7),
+
+		.lcdcon5 =	S3C2410_LCDCON5_INVVLINE |
+				S3C2410_LCDCON5_FRM565 |
+				S3C2410_LCDCON5_HWSWP,
+	},
+
+	.lpcsel =	0xf82,
+
+	.gpccon =	0xaa955699,
+	.gpccon_mask =	0xffc003cc,
+	.gpcup =	0x0000ffff,
+	.gpcup_mask =	0xffffffff,
+
+	.gpdcon =	0xaa95aaa1,
+	.gpdcon_mask =	0xffc0fff0,
+	.gpdup =	0x0000faff,
+	.gpdup_mask =	0xffffffff,
+
+	.fixed_syncs =	1,
+	.width  =	240,
+	.height =	320,
+
+	.xres	= {
+		.min =		240,
+		.max =		240,
+		.defval =	240,
+	},
+
+	.yres	= {
+		.max =		320,
+		.min =		320,
+		.defval	=	320,
+	},
+
+	.bpp	= {
+		.min =		16,
+		.max =		16,
+		.defval =	16,
+	},
+};
+
 static struct platform_device *rx3715_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_lcd,
@@ -122,14 +196,12 @@ static void __init rx3715_init_irq(void)
 	s3c24xx_init_irq();
 }
 
-#ifdef CONFIG_PM
 static void __init rx3715_init_machine(void)
 {
 	s3c2410_pm_init();
+	s3c24xx_fb_set_platdata(&rx3715_lcdcfg);
 }
-#else
-#define rx3715_init_machine NULL
-#endif
+
 
 MACHINE_START(RX3715, "IPAQ-RX3715")
 	/* Maintainer: Ben Dooks <ben@fluff.org> */
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index 2eda55a6b678..2c91965ee1c8 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -38,6 +38,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/platform_device.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-s3c2410/mach-smdk2440.c b/arch/arm/mach-s3c2410/mach-smdk2440.c
index 722ef46b630a..4e31118533e6 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2440.c
@@ -19,6 +19,7 @@
  *	10-Mar-2005 LCVR  Replaced S3C2410_VA by S3C24XX_VA
  *	14-Mar-2005 BJD	  void __iomem fixes
  *	20-Sep-2005 BJD   Added static to non-exported items
+ *	26-Oct-2005 BJD   Added framebuffer data
 */
 
 #include <linux/kernel.h>
@@ -27,6 +28,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/platform_device.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -41,7 +43,10 @@
 //#include <asm/debug-ll.h>
 #include <asm/arch/regs-serial.h>
 #include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-lcd.h>
+
 #include <asm/arch/idle.h>
+#include <asm/arch/fb.h>
 
 #include "s3c2410.h"
 #include "s3c2440.h"
@@ -53,8 +58,27 @@
 static struct map_desc smdk2440_iodesc[] __initdata = {
 	/* ISA IO Space map (memory space selected by A24) */
 
-	{ (u32)S3C24XX_VA_ISA_WORD, S3C2410_CS2, SZ_16M, MT_DEVICE },
-	{ (u32)S3C24XX_VA_ISA_BYTE, S3C2410_CS2, SZ_16M, MT_DEVICE },
+	{
+		.virtual	= (u32)S3C24XX_VA_ISA_WORD,
+		.pfn		= __phys_to_pfn(S3C2410_CS2),
+		.length		= 0x10000,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (u32)S3C24XX_VA_ISA_WORD + 0x10000,
+		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+		.length		= SZ_4M,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
+		.pfn		= __phys_to_pfn(S3C2410_CS2),
+		.length		= 0x10000,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
+		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+		.length		= SZ_4M,
+		.type		= MT_DEVICE,
+	}
 };
 
 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
@@ -86,6 +110,70 @@ static struct s3c2410_uartcfg smdk2440_uartcfgs[] = {
 	}
 };
 
+/* LCD driver info */
+
+static struct s3c2410fb_mach_info smdk2440_lcd_cfg __initdata = {
+	.regs	= {
+
+		.lcdcon1	= S3C2410_LCDCON1_TFT16BPP |
+				  S3C2410_LCDCON1_TFT |
+				  S3C2410_LCDCON1_CLKVAL(0x04),
+
+		.lcdcon2	= S3C2410_LCDCON2_VBPD(7) |
+				  S3C2410_LCDCON2_LINEVAL(319) |
+				  S3C2410_LCDCON2_VFPD(6) |
+				  S3C2410_LCDCON2_VSPW(3),
+
+		.lcdcon3	= S3C2410_LCDCON3_HBPD(19) |
+				  S3C2410_LCDCON3_HOZVAL(239) |
+				  S3C2410_LCDCON3_HFPD(7),
+
+		.lcdcon4	= S3C2410_LCDCON4_MVAL(0) |
+				  S3C2410_LCDCON4_HSPW(3),
+
+		.lcdcon5	= S3C2410_LCDCON5_FRM565 |
+				  S3C2410_LCDCON5_INVVLINE |
+				  S3C2410_LCDCON5_INVVFRAME |
+				  S3C2410_LCDCON5_PWREN |
+				  S3C2410_LCDCON5_HWSWP,
+	},
+
+#if 0
+	/* currently setup by downloader */
+	.gpccon		= 0xaa940659,
+	.gpccon_mask	= 0xffffffff,
+	.gpcup		= 0x0000ffff,
+	.gpcup_mask	= 0xffffffff,
+	.gpdcon		= 0xaa84aaa0,
+	.gpdcon_mask	= 0xffffffff,
+	.gpdup		= 0x0000faff,
+	.gpdup_mask	= 0xffffffff,
+#endif
+
+	.lpcsel		= ((0xCE6) & ~7) | 1<<4,
+
+	.width		= 240,
+	.height		= 320,
+
+	.xres		= {
+		.min	= 240,
+		.max	= 240,
+		.defval	= 240,
+	},
+
+	.yres		= {
+		.min	= 320,
+		.max	= 320,
+		.defval = 320,
+	},
+
+	.bpp		= {
+		.min	= 16,
+		.max	= 16,
+		.defval = 16,
+	},
+};
+
 static struct platform_device *smdk2440_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_lcd,
@@ -121,6 +209,8 @@ static void __init smdk2440_machine_init(void)
 	s3c2410_gpio_setpin(S3C2410_GPF6, 0);
 	s3c2410_gpio_setpin(S3C2410_GPF7, 0);
 
+	s3c24xx_fb_set_platdata(&smdk2440_lcd_cfg);
+
 	s3c2410_pm_init();
 }
 
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 663a7f98fc0b..ae7e099bf6c8 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -74,27 +74,47 @@
 
 /* macros to modify the physical addresses for io space */
 
-#define PA_CS2(item) ((item) + S3C2410_CS2)
-#define PA_CS3(item) ((item) + S3C2410_CS3)
-#define PA_CS4(item) ((item) + S3C2410_CS4)
-#define PA_CS5(item) ((item) + S3C2410_CS5)
+#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2))
+#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3))
+#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4))
+#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5))
 
 static struct map_desc vr1000_iodesc[] __initdata = {
   /* ISA IO areas */
-
-  { (u32)S3C24XX_VA_ISA_BYTE, PA_CS2(BAST_PA_ISAIO),	   SZ_16M, MT_DEVICE },
-  { (u32)S3C24XX_VA_ISA_WORD, PA_CS3(BAST_PA_ISAIO),	   SZ_16M, MT_DEVICE },
-
-  /* we could possibly compress the next set down into a set of smaller tables
-   * pagetables, but that would mean using an L2 section, and it still means
-   * we cannot actually feed the same register to an LDR due to 16K spacing
-   */
-
-  /* bast CPLD control registers, and external interrupt controls */
-  { (u32)VR1000_VA_CTRL1, VR1000_PA_CTRL1,	       SZ_1M, MT_DEVICE },
-  { (u32)VR1000_VA_CTRL2, VR1000_PA_CTRL2,	       SZ_1M, MT_DEVICE },
-  { (u32)VR1000_VA_CTRL3, VR1000_PA_CTRL3,	       SZ_1M, MT_DEVICE },
-  { (u32)VR1000_VA_CTRL4, VR1000_PA_CTRL4,	       SZ_1M, MT_DEVICE },
+  {
+	  .virtual	= (u32)S3C24XX_VA_ISA_BYTE,
+	  .pfn		= PA_CS2(BAST_PA_ISAIO),
+	  .length	= SZ_16M,
+	  .type		= MT_DEVICE,
+  }, {
+	  .virtual	= (u32)S3C24XX_VA_ISA_WORD,
+	  .pfn		= PA_CS3(BAST_PA_ISAIO),
+	  .length	= SZ_16M,
+	  .type		= MT_DEVICE,
+  },
+
+  /*  CPLD control registers, and external interrupt controls */
+  {
+	  .virtual	= (u32)VR1000_VA_CTRL1,
+	  .pfn		= __phys_to_pfn(VR1000_PA_CTRL1),
+	  .length	= SZ_1M,
+	  .type		= MT_DEVICE,
+  }, {
+	  .virtual	= (u32)VR1000_VA_CTRL2,
+	  .pfn		= __phys_to_pfn(VR1000_PA_CTRL2),
+	  .length	= SZ_1M,
+	  .type		= MT_DEVICE,
+  }, {
+	  .virtual	= (u32)VR1000_VA_CTRL3,
+	  .pfn		= __phys_to_pfn(VR1000_PA_CTRL3),
+	  .length	= SZ_1M,
+	  .type		= MT_DEVICE,
+  }, {
+	  .virtual	= (u32)VR1000_VA_CTRL4,
+	  .pfn		= __phys_to_pfn(VR1000_PA_CTRL4),
+	  .length	= SZ_1M,
+	  .type		= MT_DEVICE,
+  },
 
   /* peripheral space... one for each of fast/slow/byte/16bit */
   /* note, ide is only decoded in word space, even though some registers
@@ -288,7 +308,7 @@ static struct resource vr1000_dm9k1_resource[] = {
  * better IO routines can be written and tested
 */
 
-struct dm9000_plat_data vr1000_dm9k_platdata = {
+static struct dm9000_plat_data vr1000_dm9k_platdata = {
 	.flags		= DM9000_PLATF_16BITONLY,
 };
 
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index 0b88993dfd27..0a2013a76549 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -27,7 +27,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -125,9 +125,6 @@ static struct platform_device *uart_devices[] __initdata = {
 	&s3c_uart2
 };
 
-/* store our uart devices for the serial driver console */
-struct platform_device *s3c2410_uart_devices[3];
-
 static int s3c2410_uart_count = 0;
 
 /* uart registration process */
diff --git a/arch/arm/mach-s3c2410/s3c2440.c b/arch/arm/mach-s3c2410/s3c2440.c
index d4c8281b55f6..4d63e7133b48 100644
--- a/arch/arm/mach-s3c2410/s3c2440.c
+++ b/arch/arm/mach-s3c2410/s3c2440.c
@@ -26,7 +26,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/sysdev.h>
 
 #include <asm/mach/arch.h>
@@ -151,7 +151,7 @@ void __init s3c2440_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 
 #ifdef CONFIG_PM
 
-struct sleep_save s3c2440_sleep[] = {
+static struct sleep_save s3c2440_sleep[] = {
 	SAVE_ITEM(S3C2440_DSC0),
 	SAVE_ITEM(S3C2440_DSC1),
 	SAVE_ITEM(S3C2440_GPJDAT),
@@ -260,7 +260,7 @@ void __init s3c2440_init_clocks(int xtal)
  * as a driver which may support both 2410 and 2440 may try and use it.
 */
 
-int __init s3c2440_core_init(void)
+static int __init s3c2440_core_init(void)
 {
 	return sysdev_class_register(&s3c2440_sysclass);
 }
diff --git a/arch/arm/mach-s3c2410/time.c b/arch/arm/mach-s3c2410/time.c
index c0acfb2ad790..8a00e3c3cd08 100644
--- a/arch/arm/mach-s3c2410/time.c
+++ b/arch/arm/mach-s3c2410/time.c
@@ -38,6 +38,7 @@
 #include <asm/hardware/clock.h>
 
 #include "clock.h"
+#include "cpu.h"
 
 static unsigned long timer_startval;
 static unsigned long timer_usec_ticks;
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index f021fd82be52..5098b50158a3 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -40,7 +40,6 @@
 #include <asm/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/mach-types.h>
 
 #include "devs.h"
 #include "usb-simtec.h"
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 24687f511bf5..a66ac61233a2 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -293,7 +293,8 @@ static void __init get_assabet_scr(void)
 	GPDR |= 0x3fc;			/* Configure GPIO 9:2 as outputs */
 	GPSR = 0x3fc;			/* Write 0xFF to GPIO 9:2 */
 	GPDR &= ~(0x3fc);		/* Configure GPIO 9:2 as inputs */
-	for(i = 100; i--; scr = GPLR);	/* Read GPIO 9:2 */
+	for(i = 100; i--; )		/* Read GPIO 9:2 */
+		scr = GPLR;
 	GPDR |= 0x3fc;			/*  restore correct pin direction */
 	scr &= 0x3fc;			/* save as system configuration byte. */
 	SCR_value = scr;
@@ -388,9 +389,17 @@ static struct sa1100_port_fns assabet_port_fns __initdata = {
 };
 
 static struct map_desc assabet_io_desc[] __initdata = {
- /* virtual     physical    length      type */
-  { 0xf1000000, 0x12000000, 0x00100000, MT_DEVICE }, /* Board Control Register */
-  { 0xf2800000, 0x4b800000, 0x00800000, MT_DEVICE }  /* MQ200 */
+  	{	/* Board Control Register */
+		.virtual	=  0xf1000000,
+		.pfn		= __phys_to_pfn(0x12000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}, {	/* MQ200 */
+		.virtual	=  0xf2800000,
+		.pfn		= __phys_to_pfn(0x4b800000),
+		.length		= 0x00800000,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init assabet_map_io(void)
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index b6169cb09196..edccd5eb06be 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -16,7 +16,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/tty.h>
 #include <linux/mtd/mtd.h>
@@ -254,10 +254,22 @@ EXPORT_SYMBOL(badge4_set_5V);
 
 
 static struct map_desc badge4_io_desc[] __initdata = {
-  /*  virtual    physical    length    type */
-  {0xf1000000, 0x08000000, 0x00100000, MT_DEVICE },/* SRAM  bank 1 */
-  {0xf2000000, 0x10000000, 0x00100000, MT_DEVICE },/* SRAM  bank 2 */
-  {0xf4000000, 0x48000000, 0x00100000, MT_DEVICE } /* SA-1111      */
+  	{	/* SRAM  bank 1 */
+		.virtual	= 0xf1000000,
+		.pfn		= __phys_to_pfn(0x08000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}, {	/* SRAM  bank 2 */
+		.virtual	= 0xf2000000,
+		.pfn		= __phys_to_pfn(0x10000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}, {	/* SA-1111      */
+		.virtual	= 0xf4000000,
+		.pfn		= __phys_to_pfn(0x48000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}
 };
 
 static void
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index 9484be7dc671..508593722bc7 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -14,7 +14,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/tty.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
@@ -100,8 +100,12 @@ static void __init cerf_init_irq(void)
 }
 
 static struct map_desc cerf_io_desc[] __initdata = {
-  /* virtual	 physical    length	 type */
-  { 0xf0000000, 0x08000000, 0x00100000, MT_DEVICE }  /* Crystal Ethernet Chip */
+  	{	/* Crystal Ethernet Chip */
+		.virtual	=  0xf0000000,
+		.pfn		= __phys_to_pfn(0x08000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init cerf_map_io(void)
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 25d6a4e27533..522abc036d3a 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -21,7 +21,7 @@
 #include <linux/kernel.h>
 #include <linux/tty.h>
 #include <linux/delay.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/timer.h>
@@ -111,11 +111,11 @@ static struct mtd_partition collie_partitions[] = {
 
 static void collie_set_vpp(int vpp)
 {
-	write_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR, read_scoop_reg(SCOOP_GPCR) | COLLIE_SCP_VPEN);
+	write_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR) | COLLIE_SCP_VPEN);
 	if (vpp)
-		write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(SCOOP_GPWR) | COLLIE_SCP_VPEN);
+		write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) | COLLIE_SCP_VPEN);
 	else
-		write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(SCOOP_GPWR) & ~COLLIE_SCP_VPEN);
+		write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) & ~COLLIE_SCP_VPEN);
 }
 
 static struct flash_platform_data collie_flash_data = {
@@ -171,9 +171,17 @@ static void __init collie_init(void)
 }
 
 static struct map_desc collie_io_desc[] __initdata = {
-	/* virtual     physical    length      type */
-	{0xe8000000, 0x00000000, 0x02000000, MT_DEVICE},	/* 32M main flash (cs0) */
-	{0xea000000, 0x08000000, 0x02000000, MT_DEVICE},	/* 32M boot flash (cs1) */
+	{	/* 32M main flash (cs0) */
+		.virtual	= 0xe8000000,
+		.pfn		= __phys_to_pfn(0x00000000),
+		.length		= 0x02000000,
+		.type		= MT_DEVICE
+	}, {	/* 32M boot flash (cs1) */
+		.virtual	= 0xea000000,
+		.pfn		= __phys_to_pfn(0x08000000),
+		.length		= 0x02000000,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init collie_map_io(void)
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 3f1e358455e5..2abdc419e984 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -17,12 +17,15 @@
 #include <linux/pm.h>
 #include <linux/cpufreq.h>
 #include <linux/ioport.h>
+#include <linux/sched.h>	/* just for sched_clock() - funny that */
+#include <linux/platform_device.h>
 
 #include <asm/div64.h>
 #include <asm/hardware.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
+#include <asm/mach/flash.h>
 #include <asm/irq.h>
 
 #include "generic.h"
@@ -283,6 +286,7 @@ static struct platform_device sa11x0mtd_device = {
 void sa11x0_set_flash_data(struct flash_platform_data *flash,
 			   struct resource *res, int nr)
 {
+	flash->name = "sa1100";
 	sa11x0mtd_device.dev.platform_data = flash;
 	sa11x0mtd_device.resource = res;
 	sa11x0mtd_device.num_resources = nr;
@@ -369,11 +373,27 @@ EXPORT_SYMBOL(sa1100fb_lcd_power);
  */
 
 static struct map_desc standard_io_desc[] __initdata = {
- /* virtual     physical    length      type */
-  { 0xf8000000, 0x80000000, 0x00100000, MT_DEVICE }, /* PCM */
-  { 0xfa000000, 0x90000000, 0x00100000, MT_DEVICE }, /* SCM */
-  { 0xfc000000, 0xa0000000, 0x00100000, MT_DEVICE }, /* MER */
-  { 0xfe000000, 0xb0000000, 0x00200000, MT_DEVICE }  /* LCD + DMA */
+  	{	/* PCM */
+		.virtual	=  0xf8000000,
+		.pfn		= __phys_to_pfn(0x80000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}, {	/* SCM */
+		.virtual	=  0xfa000000,
+		.pfn		= __phys_to_pfn(0x90000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}, {	/* MER */
+		.virtual	=  0xfc000000,
+		.pfn		= __phys_to_pfn(0xa0000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}, {	/* LCD + DMA */
+		.virtual	=  0xfe000000,
+		.pfn		= __phys_to_pfn(0xb0000000),
+		.length		= 0x00200000,
+		.type		= MT_DEVICE
+	},
 };
 
 void __init sa1100_map_io(void)
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index e7aa2681ca64..e8352b7f74b0 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -223,10 +223,22 @@ static void h3xxx_lcd_power(int enable)
 }
 
 static struct map_desc h3600_io_desc[] __initdata = {
- /* virtual	       physical 	  length      type */
-  { H3600_BANK_2_VIRT, SA1100_CS2_PHYS,   0x02800000, MT_DEVICE }, /* static memory bank 2  CS#2 */
-  { H3600_BANK_4_VIRT, SA1100_CS4_PHYS,   0x00800000, MT_DEVICE }, /* static memory bank 4  CS#4 */
-  { H3600_EGPIO_VIRT,  H3600_EGPIO_PHYS,  0x01000000, MT_DEVICE }, /* EGPIO 0		CS#5 */
+  	{	/* static memory bank 2  CS#2 */
+		.virtual	=  H3600_BANK_2_VIRT,
+		.pfn		= __phys_to_pfn(SA1100_CS2_PHYS),
+		.length		= 0x02800000,
+		.type		= MT_DEVICE
+	}, {	/* static memory bank 4  CS#4 */
+		.virtual	=  H3600_BANK_4_VIRT,
+		.pfn		= __phys_to_pfn(SA1100_CS4_PHYS),
+		.length		= 0x00800000,
+		.type		= MT_DEVICE
+	}, {	/* EGPIO 0		CS#5 */
+		.virtual	=  H3600_EGPIO_VIRT,
+		.pfn		= __phys_to_pfn(H3600_EGPIO_PHYS),
+		.length		= 0x01000000,
+		.type		= MT_DEVICE
+	}
 };
 
 /*
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index 502d65cfe654..c922e043c424 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -57,8 +57,12 @@ static void hackkit_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
  */
 
 static struct map_desc hackkit_io_desc[] __initdata = {
- /* virtual     physical    length      type */
-  { 0xe8000000, 0x00000000, 0x01000000, MT_DEVICE } /* Flash bank 0 */
+	{	/* Flash bank 0 */
+		.virtual	=  0xe8000000,
+		.pfn		= __phys_to_pfn(0x00000000),
+		.length		= 0x01000000,
+		.type		= MT_DEVICE
+	},
 };
 
 static struct sa1100_port_fns hackkit_port_fns __initdata = {
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 2f497112c96a..2f671cc3cb99 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -6,8 +6,10 @@
 #include <linux/kernel.h>
 #include <linux/tty.h>
 #include <linux/delay.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/ioport.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
 
 #include <asm/hardware.h>
 #include <asm/hardware/sa1111.h>
@@ -16,6 +18,7 @@
 #include <asm/setup.h>
 
 #include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
 
@@ -81,10 +84,22 @@ static int __init jornada720_init(void)
 arch_initcall(jornada720_init);
 
 static struct map_desc jornada720_io_desc[] __initdata = {
- /* virtual     physical    length      type */
-  { 0xf0000000, 0x48000000, 0x00100000, MT_DEVICE }, /* Epson registers */
-  { 0xf1000000, 0x48200000, 0x00100000, MT_DEVICE }, /* Epson frame buffer */
-  { 0xf4000000, 0x40000000, 0x00100000, MT_DEVICE }  /* SA-1111 */
+	{	/* Epson registers */
+		.virtual	=  0xf0000000,
+		.pfn		= __phys_to_pfn(0x48000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}, {	/* Epson frame buffer */
+		.virtual	=  0xf1000000,
+		.pfn		= __phys_to_pfn(0x48200000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}, {	/* SA-1111 */
+		.virtual	=  0xf4000000,
+		.pfn		= __phys_to_pfn(0x40000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init jornada720_map_io(void)
@@ -96,6 +111,66 @@ static void __init jornada720_map_io(void)
 	sa1100_register_uart(1, 1);
 }
 
+static struct mtd_partition jornada720_partitions[] = {
+	{
+		.name		= "JORNADA720 boot firmware",
+		.size		= 0x00040000,
+		.offset		= 0,
+		.mask_flags	= MTD_WRITEABLE,  /* force read-only */
+	}, {
+		.name		= "JORNADA720 kernel",
+		.size		= 0x000c0000,
+		.offset		= 0x00040000,
+	}, {
+		.name		= "JORNADA720 params",
+		.size		= 0x00040000,
+		.offset		= 0x00100000,
+	}, {
+		.name		= "JORNADA720 initrd",
+		.size		= 0x00100000,
+		.offset		= 0x00140000,
+	}, {
+		.name		= "JORNADA720 root cramfs",
+		.size		= 0x00300000,
+		.offset		= 0x00240000,
+	}, {
+		.name		= "JORNADA720 usr cramfs",
+		.size		= 0x00800000,
+		.offset		= 0x00540000,
+	}, {
+		.name		= "JORNADA720 usr local",
+		.size		= 0,  /* will expand to the end of the flash */
+		.offset		= 0x00d00000,
+	}
+};
+
+static void jornada720_set_vpp(int vpp)
+{
+	if (vpp)
+		PPSR |= 0x80;
+	else
+		PPSR &= ~0x80;
+	PPDR |= 0x80;
+}
+
+static struct flash_platform_data jornada720_flash_data = {
+	.map_name	= "cfi_probe",
+	.set_vpp	= jornada720_set_vpp,
+	.parts		= jornada720_partitions,
+	.nr_parts	= ARRAY_SIZE(jornada720_partitions),
+};
+
+static struct resource jornada720_flash_resource = {
+	.start		= SA1100_CS0_PHYS,
+	.end		= SA1100_CS0_PHYS + SZ_32M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static void __init jornada720_mach_init(void)
+{
+	sa11x0_set_flash_data(&jornada720_flash_data, &jornada720_flash_resource, 1);
+}
+
 MACHINE_START(JORNADA720, "HP Jornada 720")
 	/* Maintainer: Michael Gernoth <michael@gernoth.net> */
 	.phys_ram	= 0xc0000000,
@@ -105,4 +180,5 @@ MACHINE_START(JORNADA720, "HP Jornada 720")
 	.map_io		= jornada720_map_io,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
+	.init_machine	= jornada720_mach_init,
 MACHINE_END
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index ed6744d480af..8c9e3dd52942 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -31,9 +31,17 @@ static void __init lart_init(void)
 }
 
 static struct map_desc lart_io_desc[] __initdata = {
- /* virtual     physical    length      type */
-  { 0xe8000000, 0x00000000, 0x00400000, MT_DEVICE }, /* main flash memory */
-  { 0xec000000, 0x08000000, 0x00400000, MT_DEVICE }  /* main flash, alternative location */
+	{	/* main flash memory */
+		.virtual	=  0xe8000000,
+		.pfn		= __phys_to_pfn(0x00000000),
+		.length		= 0x00400000,
+		.type		= MT_DEVICE
+	}, {	/* main flash, alternative location */
+		.virtual	=  0xec000000,
+		.pfn		= __phys_to_pfn(0x08000000),
+		.length		= 0x00400000,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init lart_map_io(void)
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index fc061641b7be..9e02bc3712a0 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -8,7 +8,7 @@
 #include <linux/tty.h>
 #include <linux/ioport.h>
 #include <linux/serial_core.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/slab.h>
 
 #include <asm/hardware.h>
@@ -137,7 +137,7 @@ static struct sa1100_port_fns neponset_port_fns __initdata = {
 	.get_mctrl	= neponset_get_mctrl,
 };
 
-static int neponset_probe(struct device *dev)
+static int neponset_probe(struct platform_device *dev)
 {
 	sa1100_register_uart_fns(&neponset_port_fns);
 
@@ -178,33 +178,27 @@ static int neponset_probe(struct device *dev)
 /*
  * LDM power management.
  */
-static int neponset_suspend(struct device *dev, pm_message_t state, u32 level)
+static int neponset_suspend(struct platform_device *dev, pm_message_t state)
 {
 	/*
 	 * Save state.
 	 */
-	if (level == SUSPEND_SAVE_STATE ||
-	    level == SUSPEND_DISABLE ||
-	    level == SUSPEND_POWER_DOWN) {
-		if (!dev->power.saved_state)
-			dev->power.saved_state = kmalloc(sizeof(unsigned int), GFP_KERNEL);
-		if (!dev->power.saved_state)
-			return -ENOMEM;
-
-		*(unsigned int *)dev->power.saved_state = NCR_0;
-	}
+	if (!dev->dev.power.saved_state)
+		dev->dev.power.saved_state = kmalloc(sizeof(unsigned int), GFP_KERNEL);
+	if (!dev->dev.power.saved_state)
+		return -ENOMEM;
+
+	*(unsigned int *)dev->dev.power.saved_state = NCR_0;
 
 	return 0;
 }
 
-static int neponset_resume(struct device *dev, u32 level)
+static int neponset_resume(struct platform_device *dev)
 {
-	if (level == RESUME_RESTORE_STATE || level == RESUME_ENABLE) {
-		if (dev->power.saved_state) {
-			NCR_0 = *(unsigned int *)dev->power.saved_state;
-			kfree(dev->power.saved_state);
-			dev->power.saved_state = NULL;
-		}
+	if (dev->dev.power.saved_state) {
+		NCR_0 = *(unsigned int *)dev->dev.power.saved_state;
+		kfree(dev->dev.power.saved_state);
+		dev->dev.power.saved_state = NULL;
 	}
 
 	return 0;
@@ -215,12 +209,13 @@ static int neponset_resume(struct device *dev, u32 level)
 #define neponset_resume  NULL
 #endif
 
-static struct device_driver neponset_device_driver = {
-	.name		= "neponset",
-	.bus		= &platform_bus_type,
+static struct platform_driver neponset_device_driver = {
 	.probe		= neponset_probe,
 	.suspend	= neponset_suspend,
 	.resume		= neponset_resume,
+	.driver		= {
+		.name	= "neponset",
+	},
 };
 
 static struct resource neponset_resources[] = {
@@ -299,7 +294,7 @@ static struct platform_device *devices[] __initdata = {
 
 static int __init neponset_init(void)
 {
-	driver_register(&neponset_device_driver);
+	platform_driver_register(&neponset_device_driver);
 
 	/*
 	 * The Neponset is only present on the Assabet machine type.
@@ -331,9 +326,17 @@ static int __init neponset_init(void)
 subsys_initcall(neponset_init);
 
 static struct map_desc neponset_io_desc[] __initdata = {
- /* virtual     physical    length type */
-  { 0xf3000000, 0x10000000, SZ_1M, MT_DEVICE }, /* System Registers */
-  { 0xf4000000, 0x40000000, SZ_1M, MT_DEVICE }  /* SA-1111 */
+	{	/* System Registers */
+		.virtual	=  0xf3000000,
+		.pfn		= __phys_to_pfn(0x10000000),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE
+	}, {	/* SA-1111 */
+		.virtual	=  0xf4000000,
+		.pfn		= __phys_to_pfn(0x40000000),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE
+	}
 };
 
 void __init neponset_map_io(void)
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index e17b58fb9c9c..58c18f9e9b7b 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -6,7 +6,7 @@
 #include <linux/kernel.h>
 #include <linux/tty.h>
 #include <linux/ioport.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <linux/mtd/partitions.h>
 
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 07f6d5fd7bb0..439ddc9b06d6 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -10,7 +10,7 @@
 #include <linux/proc_fs.h>
 #include <linux/string.h> 
 #include <linux/pm.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
@@ -60,11 +60,17 @@ EXPORT_SYMBOL(set_cs3_bit);
 EXPORT_SYMBOL(clear_cs3_bit);
 
 static struct map_desc simpad_io_desc[] __initdata = {
-        /* virtual	physical    length	type */
-	/* MQ200 */
-	{ 0xf2800000, 0x4b800000, 0x00800000, MT_DEVICE },
-	/* Paules CS3, write only */
-	{ 0xf1000000, 0x18000000, 0x00100000, MT_DEVICE },
+	{	/* MQ200 */
+		.virtual	=  0xf2800000,
+		.pfn		= __phys_to_pfn(0x4b800000),
+		.length		= 0x00800000,
+		.type		= MT_DEVICE
+	}, {	/* Paules CS3, write only */
+		.virtual	=  0xf1000000,
+		.pfn		= __phys_to_pfn(0x18000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	},
 };
 
 
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index 47e0420623fc..e4b435e634e4 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -124,11 +124,13 @@ static void __init sa1100_timer_init(void)
 	tv.tv_sec = sa1100_get_rtc_time();
 	do_settimeofday(&tv);
 
-	OSMR0 = 0;		/* set initial match at 0 */
+	OIER = 0;		/* disable any timer interrupts */
+	OSCR = LATCH*2;		/* push OSCR out of the way */
+	OSMR0 = LATCH;		/* set initial match */
 	OSSR = 0xf;		/* clear status on all timers */
 	setup_irq(IRQ_OST0, &sa1100_timer_irq);
-	OIER |= OIER_E0;	/* enable match on timer 0 to cause interrupts */
-	OSCR = 0;		/* initialize free-running timer, force first match */
+	OIER = OIER_E0;		/* enable match on timer 0 to cause interrupts */
+	OSCR = 0;		/* initialize free-running timer */
 }
 
 #ifdef CONFIG_NO_IDLE_HZ
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index 946c0d11c73b..2d428b6dbb58 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -62,7 +62,12 @@ arch_initcall(shark_init);
 extern void shark_init_irq(void);
 
 static struct map_desc shark_io_desc[] __initdata = {
-	{ IO_BASE	, IO_START	, IO_SIZE	, MT_DEVICE }
+	{
+		.virtual	= IO_BASE,
+		.pfn		= __phys_to_pfn(IO_START),
+		.length		= IO_SIZE,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init shark_map_io(void)
diff --git a/arch/arm/mach-versatile/clock.c b/arch/arm/mach-versatile/clock.c
index 48025c2b9987..b96a2ea15d41 100644
--- a/arch/arm/mach-versatile/clock.c
+++ b/arch/arm/mach-versatile/clock.c
@@ -13,6 +13,7 @@
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
+#include <linux/string.h>
 
 #include <asm/semaphore.h>
 #include <asm/hardware/clock.h>
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 3c8862fde51a..a1ca46630dda 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -22,6 +22,7 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/interrupt.h>
 
@@ -30,7 +31,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
-#include <asm/mach-types.h>
 #include <asm/hardware/amba.h>
 #include <asm/hardware/amba_clcd.h>
 #include <asm/hardware/arm_timer.h>
@@ -52,8 +52,9 @@
  *
  * Setup a VA for the Versatile Vectored Interrupt Controller.
  */
-#define VA_VIC_BASE		 IO_ADDRESS(VERSATILE_VIC_BASE)
-#define VA_SIC_BASE		 IO_ADDRESS(VERSATILE_SIC_BASE)
+#define __io_address(n)		__io(IO_ADDRESS(n))
+#define VA_VIC_BASE		__io_address(VERSATILE_VIC_BASE)
+#define VA_SIC_BASE		__io_address(VERSATILE_SIC_BASE)
 
 static void vic_mask_irq(unsigned int irq)
 {
@@ -186,25 +187,82 @@ void __init versatile_init_irq(void)
 }
 
 static struct map_desc versatile_io_desc[] __initdata = {
- { IO_ADDRESS(VERSATILE_SYS_BASE),   VERSATILE_SYS_BASE,   SZ_4K,      MT_DEVICE },
- { IO_ADDRESS(VERSATILE_SIC_BASE),   VERSATILE_SIC_BASE,   SZ_4K,      MT_DEVICE },
- { IO_ADDRESS(VERSATILE_VIC_BASE),   VERSATILE_VIC_BASE,   SZ_4K,      MT_DEVICE },
- { IO_ADDRESS(VERSATILE_SCTL_BASE),  VERSATILE_SCTL_BASE,  SZ_4K * 9,  MT_DEVICE },
+	{
+		.virtual	=  IO_ADDRESS(VERSATILE_SYS_BASE),
+		.pfn		= __phys_to_pfn(VERSATILE_SYS_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	=  IO_ADDRESS(VERSATILE_SIC_BASE),
+		.pfn		= __phys_to_pfn(VERSATILE_SIC_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	=  IO_ADDRESS(VERSATILE_VIC_BASE),
+		.pfn		= __phys_to_pfn(VERSATILE_VIC_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	=  IO_ADDRESS(VERSATILE_SCTL_BASE),
+		.pfn		= __phys_to_pfn(VERSATILE_SCTL_BASE),
+		.length		= SZ_4K * 9,
+		.type		= MT_DEVICE
+	},
 #ifdef CONFIG_MACH_VERSATILE_AB
- { IO_ADDRESS(VERSATILE_GPIO0_BASE), VERSATILE_GPIO0_BASE, SZ_4K,      MT_DEVICE },
- { IO_ADDRESS(VERSATILE_IB2_BASE),   VERSATILE_IB2_BASE,   SZ_64M,     MT_DEVICE },
+ 	{
+		.virtual	=  IO_ADDRESS(VERSATILE_GPIO0_BASE),
+		.pfn		= __phys_to_pfn(VERSATILE_GPIO0_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	=  IO_ADDRESS(VERSATILE_IB2_BASE),
+		.pfn		= __phys_to_pfn(VERSATILE_IB2_BASE),
+		.length		= SZ_64M,
+		.type		= MT_DEVICE
+	},
 #endif
 #ifdef CONFIG_DEBUG_LL
- { IO_ADDRESS(VERSATILE_UART0_BASE), VERSATILE_UART0_BASE, SZ_4K,      MT_DEVICE },
+ 	{
+		.virtual	=  IO_ADDRESS(VERSATILE_UART0_BASE),
+		.pfn		= __phys_to_pfn(VERSATILE_UART0_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	},
 #endif
 #ifdef CONFIG_PCI
- { IO_ADDRESS(VERSATILE_PCI_CORE_BASE), VERSATILE_PCI_CORE_BASE, SZ_4K, MT_DEVICE },
- { VERSATILE_PCI_VIRT_BASE,          VERSATILE_PCI_BASE,   VERSATILE_PCI_BASE_SIZE, MT_DEVICE },
- { VERSATILE_PCI_CFG_VIRT_BASE,      VERSATILE_PCI_CFG_BASE, VERSATILE_PCI_CFG_BASE_SIZE, MT_DEVICE },
+ 	{
+		.virtual	=  IO_ADDRESS(VERSATILE_PCI_CORE_BASE),
+		.pfn		= __phys_to_pfn(VERSATILE_PCI_CORE_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	=  VERSATILE_PCI_VIRT_BASE,
+		.pfn		= __phys_to_pfn(VERSATILE_PCI_BASE),
+		.length		= VERSATILE_PCI_BASE_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	=  VERSATILE_PCI_CFG_VIRT_BASE,
+		.pfn		= __phys_to_pfn(VERSATILE_PCI_CFG_BASE),
+		.length		= VERSATILE_PCI_CFG_BASE_SIZE,
+		.type		= MT_DEVICE
+	},
 #if 0
- { VERSATILE_PCI_VIRT_MEM_BASE0,     VERSATILE_PCI_MEM_BASE0, SZ_16M,  MT_DEVICE },
- { VERSATILE_PCI_VIRT_MEM_BASE1,     VERSATILE_PCI_MEM_BASE1, SZ_16M,  MT_DEVICE },
- { VERSATILE_PCI_VIRT_MEM_BASE2,     VERSATILE_PCI_MEM_BASE2, SZ_16M,  MT_DEVICE },
+ 	{
+		.virtual	=  VERSATILE_PCI_VIRT_MEM_BASE0,
+		.pfn		= __phys_to_pfn(VERSATILE_PCI_MEM_BASE0),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	=  VERSATILE_PCI_VIRT_MEM_BASE1,
+		.pfn		= __phys_to_pfn(VERSATILE_PCI_MEM_BASE1),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	=  VERSATILE_PCI_VIRT_MEM_BASE2,
+		.pfn		= __phys_to_pfn(VERSATILE_PCI_MEM_BASE2),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	},
 #endif
 #endif
 };
@@ -214,7 +272,7 @@ void __init versatile_map_io(void)
 	iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc));
 }
 
-#define VERSATILE_REFCOUNTER	(IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_24MHz_OFFSET)
+#define VERSATILE_REFCOUNTER	(__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_24MHz_OFFSET)
 
 /*
  * This is the Versatile sched_clock implementation.  This has
@@ -231,7 +289,7 @@ unsigned long long sched_clock(void)
 }
 
 
-#define VERSATILE_FLASHCTRL    (IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_FLASH_OFFSET)
+#define VERSATILE_FLASHCTRL    (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_FLASH_OFFSET)
 
 static int versatile_flash_init(void)
 {
@@ -309,7 +367,7 @@ static struct platform_device smc91x_device = {
 	.resource	= smc91x_resources,
 };
 
-#define VERSATILE_SYSMCI	(IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET)
+#define VERSATILE_SYSMCI	(__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET)
 
 unsigned int mmc_status(struct device *dev)
 {
@@ -343,11 +401,11 @@ static const struct icst307_params versatile_oscvco_params = {
 
 static void versatile_oscvco_set(struct clk *clk, struct icst307_vco vco)
 {
-	unsigned long sys_lock = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_LOCK_OFFSET;
+	void __iomem *sys_lock = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LOCK_OFFSET;
 #if defined(CONFIG_ARCH_VERSATILE_PB)
-	unsigned long sys_osc = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC4_OFFSET;
+	void __iomem *sys_osc = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC4_OFFSET;
 #elif defined(CONFIG_MACH_VERSATILE_AB)
-	unsigned long sys_osc = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC1_OFFSET;
+	void __iomem *sys_osc = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC1_OFFSET;
 #endif
 	u32 val;
 
@@ -483,7 +541,7 @@ static struct clcd_panel epson_2_2_in = {
  */
 static struct clcd_panel *versatile_clcd_panel(void)
 {
-	unsigned long sys_clcd = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
+	void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
 	struct clcd_panel *panel = &vga;
 	u32 val;
 
@@ -510,7 +568,7 @@ static struct clcd_panel *versatile_clcd_panel(void)
  */
 static void versatile_clcd_disable(struct clcd_fb *fb)
 {
-	unsigned long sys_clcd = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
+	void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
 	u32 val;
 
 	val = readl(sys_clcd);
@@ -522,7 +580,7 @@ static void versatile_clcd_disable(struct clcd_fb *fb)
 	 * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off
 	 */
 	if (fb->panel == &sanyo_2_5_in) {
-		unsigned long versatile_ib2_ctrl = IO_ADDRESS(VERSATILE_IB2_CTRL);
+		void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
 		unsigned long ctrl;
 
 		ctrl = readl(versatile_ib2_ctrl);
@@ -537,7 +595,7 @@ static void versatile_clcd_disable(struct clcd_fb *fb)
  */
 static void versatile_clcd_enable(struct clcd_fb *fb)
 {
-	unsigned long sys_clcd = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
+	void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
 	u32 val;
 
 	val = readl(sys_clcd);
@@ -571,7 +629,7 @@ static void versatile_clcd_enable(struct clcd_fb *fb)
 	 * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on
 	 */
 	if (fb->panel == &sanyo_2_5_in) {
-		unsigned long versatile_ib2_ctrl = IO_ADDRESS(VERSATILE_IB2_CTRL);
+		void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
 		unsigned long ctrl;
 
 		ctrl = readl(versatile_ib2_ctrl);
@@ -720,7 +778,7 @@ static struct amba_device *amba_devs[] __initdata = {
 };
 
 #ifdef CONFIG_LEDS
-#define VA_LEDS_BASE (IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET)
+#define VA_LEDS_BASE (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET)
 
 static void versatile_leds_event(led_event_t ledevt)
 {
@@ -778,11 +836,11 @@ void __init versatile_init(void)
 /*
  * Where is the timer (VA)?
  */
-#define TIMER0_VA_BASE		 IO_ADDRESS(VERSATILE_TIMER0_1_BASE)
-#define TIMER1_VA_BASE		(IO_ADDRESS(VERSATILE_TIMER0_1_BASE) + 0x20)
-#define TIMER2_VA_BASE		 IO_ADDRESS(VERSATILE_TIMER2_3_BASE)
-#define TIMER3_VA_BASE		(IO_ADDRESS(VERSATILE_TIMER2_3_BASE) + 0x20)
-#define VA_IC_BASE		 IO_ADDRESS(VERSATILE_VIC_BASE) 
+#define TIMER0_VA_BASE		 __io_address(VERSATILE_TIMER0_1_BASE)
+#define TIMER1_VA_BASE		(__io_address(VERSATILE_TIMER0_1_BASE) + 0x20)
+#define TIMER2_VA_BASE		 __io_address(VERSATILE_TIMER2_3_BASE)
+#define TIMER3_VA_BASE		(__io_address(VERSATILE_TIMER2_3_BASE) + 0x20)
+#define VA_IC_BASE		 __io_address(VERSATILE_VIC_BASE) 
 
 /*
  * How long is the timer interval?
@@ -877,12 +935,12 @@ static void __init versatile_timer_init(void)
 	 *	VERSATILE_REFCLK is 32KHz
 	 *	VERSATILE_TIMCLK is 1MHz
 	 */
-	val = readl(IO_ADDRESS(VERSATILE_SCTL_BASE));
+	val = readl(__io_address(VERSATILE_SCTL_BASE));
 	writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) |
 	       (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) | 
 	       (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) |
 	       (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val,
-	       IO_ADDRESS(VERSATILE_SCTL_BASE));
+	       __io_address(VERSATILE_SCTL_BASE));
 
 	/*
 	 * Initialise to a known state (all timers off)
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
index d1565e851f0e..b80d57d51699 100644
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@@ -29,7 +29,6 @@
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/mach/pci.h>
-#include <asm/mach-types.h>
 
 /*
  * these spaces are mapped using the following base registers:
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index db5e47dfc303..e84fdde6edf8 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -102,8 +102,8 @@ config CPU_ARM922T
 # ARM925T
 config CPU_ARM925T
  	bool "Support ARM925T processor" if ARCH_OMAP1
- 	depends on ARCH_OMAP1510
- 	default y if ARCH_OMAP1510
+ 	depends on ARCH_OMAP15XX
+ 	default y if ARCH_OMAP15XX
 	select CPU_32v4
 	select CPU_ABRT_EV4T
 	select CPU_CACHE_V4WT
@@ -120,8 +120,8 @@ config CPU_ARM925T
 
 # ARM926T
 config CPU_ARM926T
-	bool "Support ARM926T processor" if ARCH_INTEGRATOR
-	depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX
+	bool "Support ARM926T processor"
+	depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB
 	default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX
 	select CPU_32v5
 	select CPU_ABRT_EV5TJ
@@ -242,7 +242,7 @@ config CPU_XSCALE
 # ARMv6
 config CPU_V6
 	bool "Support ARM V6 processor"
-	depends on ARCH_INTEGRATOR
+	depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2
 	select CPU_32v6
 	select CPU_ABRT_EV6
 	select CPU_CACHE_V6
@@ -250,6 +250,18 @@ config CPU_V6
 	select CPU_COPY_V6
 	select CPU_TLB_V6
 
+# ARMv6k
+config CPU_32v6K
+	bool "Support ARM V6K processor extensions" if !SMP
+	depends on CPU_V6
+	default y if SMP
+	help
+	  Say Y here if your ARMv6 processor supports the 'K' extension.
+	  This enables the kernel to use some instructions not present
+	  on previous processors, and as such a kernel build with this
+	  enabled will not boot on processors with do not support these
+	  instructions.
+
 # Figure out what processor architecture version we should be using.
 # This defines the compiler instruction set which depends on the machine type.
 config CPU_32v3
@@ -370,21 +382,21 @@ config CPU_BIG_ENDIAN
 
 config CPU_ICACHE_DISABLE
 	bool "Disable I-Cache"
-	depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020
+	depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_V6
 	help
 	  Say Y here to disable the processor instruction cache. Unless
 	  you have a reason not to or are unsure, say N.
 
 config CPU_DCACHE_DISABLE
 	bool "Disable D-Cache"
-	depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020
+	depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_V6
 	help
 	  Say Y here to disable the processor data cache. Unless
 	  you have a reason not to or are unsure, say N.
 
 config CPU_DCACHE_WRITETHROUGH
 	bool "Force write through D-cache"
-	depends on (CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020) && !CPU_DCACHE_DISABLE
+	depends on (CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_V6) && !CPU_DCACHE_DISABLE
 	default y if CPU_ARM925T
 	help
 	  Say Y here to use the data cache in writethrough mode. Unless you
@@ -399,7 +411,7 @@ config CPU_CACHE_ROUND_ROBIN
 
 config CPU_BPREDICT_DISABLE
 	bool "Disable branch prediction"
-	depends on CPU_ARM1020
+	depends on CPU_ARM1020 || CPU_V6
 	help
 	  Say Y here to disable branch prediction.  If unsure, say N.
 
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 59f47d4c2dfe..ffe73ba2bf17 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -51,4 +51,4 @@ obj-$(CONFIG_CPU_ARM1026)	+= proc-arm1026.o
 obj-$(CONFIG_CPU_SA110)		+= proc-sa110.o
 obj-$(CONFIG_CPU_SA1100)	+= proc-sa1100.o
 obj-$(CONFIG_CPU_XSCALE)	+= proc-xscale.o
-obj-$(CONFIG_CPU_V6)		+= proc-v6.o blockops.o
+obj-$(CONFIG_CPU_V6)		+= proc-v6.o
diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S
index 8f76f3df7b4c..dbd346033122 100644
--- a/arch/arm/mm/abort-ev6.S
+++ b/arch/arm/mm/abort-ev6.S
@@ -20,6 +20,11 @@
  */
 	.align	5
 ENTRY(v6_early_abort)
+#ifdef CONFIG_CPU_MPCORE
+	clrex
+#else
+	strex	r0, r1, [sp]			@ Clear the exclusive monitor
+#endif
 	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
 	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
 /*
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index 4b39d867ac14..705c98921c37 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -111,7 +111,7 @@ proc_alignment_read(char *page, char **start, off_t off, int count, int *eof,
 }
 
 static int proc_alignment_write(struct file *file, const char __user *buffer,
-			       unsigned long count, void *data)
+				unsigned long count, void *data)
 {
 	char mode;
 
@@ -119,7 +119,7 @@ static int proc_alignment_write(struct file *file, const char __user *buffer,
 		if (get_user(mode, buffer))
 			return -EFAULT;
 		if (mode >= '0' && mode <= '5')
-			   ai_usermode = mode - '0';
+			ai_usermode = mode - '0';
 	}
 	return count;
 }
@@ -262,7 +262,7 @@ union offset_union {
 			goto fault;				\
 	} while (0)
 
-#define put32_unaligned_check(val,addr)	 \
+#define put32_unaligned_check(val,addr) \
 	__put32_unaligned_check("strb", val, addr)
 
 #define put32t_unaligned_check(val,addr) \
@@ -306,19 +306,19 @@ do_alignment_ldrhstrh(unsigned long addr, unsigned long instr, struct pt_regs *r
 	return TYPE_LDST;
 
  user:
- 	if (LDST_L_BIT(instr)) {
- 		unsigned long val;
- 		get16t_unaligned_check(val, addr);
+	if (LDST_L_BIT(instr)) {
+		unsigned long val;
+		get16t_unaligned_check(val, addr);
 
- 		/* signed half-word? */
- 		if (instr & 0x40)
- 			val = (signed long)((signed short) val);
+		/* signed half-word? */
+		if (instr & 0x40)
+			val = (signed long)((signed short) val);
 
- 		regs->uregs[rd] = val;
- 	} else
- 		put16t_unaligned_check(regs->uregs[rd], addr);
+		regs->uregs[rd] = val;
+	} else
+		put16t_unaligned_check(regs->uregs[rd], addr);
 
- 	return TYPE_LDST;
+	return TYPE_LDST;
 
  fault:
 	return TYPE_FAULT;
@@ -330,6 +330,9 @@ do_alignment_ldrdstrd(unsigned long addr, unsigned long instr,
 {
 	unsigned int rd = RD_BITS(instr);
 
+	if (((rd & 1) == 1) || (rd == 14))
+		goto bad;
+
 	ai_dword += 1;
 
 	if (user_mode(regs))
@@ -339,11 +342,11 @@ do_alignment_ldrdstrd(unsigned long addr, unsigned long instr,
 		unsigned long val;
 		get32_unaligned_check(val, addr);
 		regs->uregs[rd] = val;
-		get32_unaligned_check(val, addr+4);
-		regs->uregs[rd+1] = val;
+		get32_unaligned_check(val, addr + 4);
+		regs->uregs[rd + 1] = val;
 	} else {
 		put32_unaligned_check(regs->uregs[rd], addr);
-		put32_unaligned_check(regs->uregs[rd+1], addr+4);
+		put32_unaligned_check(regs->uregs[rd + 1], addr + 4);
 	}
 
 	return TYPE_LDST;
@@ -353,15 +356,16 @@ do_alignment_ldrdstrd(unsigned long addr, unsigned long instr,
 		unsigned long val;
 		get32t_unaligned_check(val, addr);
 		regs->uregs[rd] = val;
-		get32t_unaligned_check(val, addr+4);
-		regs->uregs[rd+1] = val;
+		get32t_unaligned_check(val, addr + 4);
+		regs->uregs[rd + 1] = val;
 	} else {
 		put32t_unaligned_check(regs->uregs[rd], addr);
-		put32t_unaligned_check(regs->uregs[rd+1], addr+4);
+		put32t_unaligned_check(regs->uregs[rd + 1], addr + 4);
 	}
 
 	return TYPE_LDST;
-
+ bad:
+	return TYPE_ERROR;
  fault:
 	return TYPE_FAULT;
 }
@@ -439,7 +443,7 @@ do_alignment_ldmstm(unsigned long addr, unsigned long instr, struct pt_regs *reg
 	if (LDST_P_EQ_U(instr))	/* U = P */
 		eaddr += 4;
 
-	/* 
+	/*
 	 * For alignment faults on the ARM922T/ARM920T the MMU  makes
 	 * the FSR (and hence addr) equal to the updated base address
 	 * of the multiple access rather than the restored value.
@@ -566,7 +570,7 @@ thumb2arm(u16 tinstr)
 	/* 6.5.1 Format 3: */
 	case 0x4800 >> 11:				/* 7.1.28 LDR(3) */
 		/* NOTE: This case is not technically possible. We're
-		 * 	 loading 32-bit memory data via PC relative
+		 *	 loading 32-bit memory data via PC relative
 		 *	 addressing mode. So we can and should eliminate
 		 *	 this case. But I'll leave it here for now.
 		 */
@@ -638,7 +642,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 
 	if (fault) {
 		type = TYPE_FAULT;
- 		goto bad_or_fault;
+		goto bad_or_fault;
 	}
 
 	if (user_mode(regs))
@@ -663,6 +667,8 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 		else if ((instr & 0x001000f0) == 0x000000d0 || /* LDRD */
 			 (instr & 0x001000f0) == 0x000000f0)   /* STRD */
 			handler = do_alignment_ldrdstrd;
+		else if ((instr & 0x01f00ff0) == 0x01000090) /* SWP */
+			goto swp;
 		else
 			goto bad;
 		break;
@@ -733,6 +739,9 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	do_bad_area(current, current->mm, addr, fsr, regs);
 	return 0;
 
+ swp:
+	printk(KERN_ERR "Alignment trap: not handling swp instruction\n");
+
  bad:
 	/*
 	 * Oops, we didn't handle the instruction.
diff --git a/arch/arm/mm/blockops.c b/arch/arm/mm/blockops.c
deleted file mode 100644
index 4f5ee2d08996..000000000000
--- a/arch/arm/mm/blockops.c
+++ /dev/null
@@ -1,185 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/mm.h>
-
-#include <asm/memory.h>
-#include <asm/ptrace.h>
-#include <asm/cacheflush.h>
-#include <asm/traps.h>
-
-extern struct cpu_cache_fns blk_cache_fns;
-
-#define HARVARD_CACHE
-
-/*
- *	blk_flush_kern_dcache_page(kaddr)
- *
- *	Ensure that the data held in the page kaddr is written back
- *	to the page in question.
- *
- *	- kaddr   - kernel address (guaranteed to be page aligned)
- */
-static void __attribute__((naked))
-blk_flush_kern_dcache_page(void *kaddr)
-{
-	asm(
-	"add	r1, r0, %0							\n\
-	sub	r1, r1, %1							\n\
-1:	.word	0xec401f0e	@ mcrr	p15, 0, r0, r1, c14, 0	@ blocking	\n\
-	mov	r0, #0								\n\
-	mcr	p15, 0, r0, c7, c5, 0						\n\
-	mcr	p15, 0, r0, c7, c10, 4						\n\
-	mov	pc, lr"
-	:
-	: "I" (PAGE_SIZE), "I" (L1_CACHE_BYTES));
-}
-
-/*
- *	blk_dma_inv_range(start,end)
- *
- *	Invalidate the data cache within the specified region; we will
- *	be performing a DMA operation in this region and we want to
- *	purge old data in the cache.
- *
- *	- start   - virtual start address of region
- *	- end     - virtual end address of region
- */
-static void __attribute__((naked))
-blk_dma_inv_range_unified(unsigned long start, unsigned long end)
-{
-	asm(
-	"tst	r0, %0								\n\
-	mcrne	p15, 0, r0, c7, c11, 1		@ clean unified line		\n\
-	tst	r1, %0								\n\
-	mcrne	p15, 0, r1, c7, c15, 1		@ clean & invalidate unified line\n\
-	.word	0xec401f06	@ mcrr	p15, 0, r1, r0, c6, 0	@ blocking	\n\
-	mov	r0, #0								\n\
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer		\n\
-	mov	pc, lr"
-	:
-	: "I" (L1_CACHE_BYTES - 1));
-}
-
-static void __attribute__((naked))
-blk_dma_inv_range_harvard(unsigned long start, unsigned long end)
-{
-	asm(
-	"tst	r0, %0								\n\
-	mcrne	p15, 0, r0, c7, c10, 1		@ clean D line			\n\
-	tst	r1, %0								\n\
-	mcrne	p15, 0, r1, c7, c14, 1		@ clean & invalidate D line	\n\
-	.word	0xec401f06	@ mcrr	p15, 0, r1, r0, c6, 0	@ blocking	\n\
-	mov	r0, #0								\n\
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer		\n\
-	mov	pc, lr"
-	:
-	: "I" (L1_CACHE_BYTES - 1));
-}
-
-/*
- *	blk_dma_clean_range(start,end)
- *	- start   - virtual start address of region
- *	- end     - virtual end address of region
- */
-static void __attribute__((naked))
-blk_dma_clean_range(unsigned long start, unsigned long end)
-{
-	asm(
-	".word	0xec401f0c	@ mcrr	p15, 0, r1, r0, c12, 0	@ blocking	\n\
-	mov	r0, #0								\n\
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer		\n\
-	mov	pc, lr");
-}
-
-/*
- *	blk_dma_flush_range(start,end)
- *	- start   - virtual start address of region
- *	- end     - virtual end address of region
- */
-static void __attribute__((naked))
-blk_dma_flush_range(unsigned long start, unsigned long end)
-{
-	asm(
-	".word	0xec401f0e	@ mcrr	p15, 0, r1, r0, c14, 0	@ blocking	\n\
-	mov	pc, lr");
-}
-
-static int blockops_trap(struct pt_regs *regs, unsigned int instr)
-{
-	regs->ARM_r4 |= regs->ARM_r2;
-	regs->ARM_pc += 4;
-	return 0;
-}
-
-static char *func[] = {
-	"Prefetch data range",
-	"Clean+Invalidate data range",
-	"Clean data range",
-	"Invalidate data range",
-	"Invalidate instr range"
-};
-
-static struct undef_hook blockops_hook __initdata = {
-	.instr_mask	= 0x0fffffd0,
-	.instr_val	= 0x0c401f00,
-	.cpsr_mask	= PSR_T_BIT,
-	.cpsr_val	= 0,
-	.fn		= blockops_trap,
-};
-
-static int __init blockops_check(void)
-{
-	register unsigned int err asm("r4") = 0;
-	unsigned int err_pos = 1;
-	unsigned int cache_type;
-	int i;
-
-	asm("mrc p15, 0, %0, c0, c0, 1" : "=r" (cache_type));
-
-	printk("Checking V6 block cache operations:\n");
-	register_undef_hook(&blockops_hook);
-
-	__asm__ ("mov	r0, %0\n\t"
-		"mov	r1, %1\n\t"
-		"mov	r2, #1\n\t"
-		".word	0xec401f2c @ mcrr p15, 0, r1, r0, c12, 2\n\t"
-		"mov	r2, #2\n\t"
-		".word	0xec401f0e @ mcrr p15, 0, r1, r0, c14, 0\n\t"
-		"mov	r2, #4\n\t"
-		".word	0xec401f0c @ mcrr p15, 0, r1, r0, c12, 0\n\t"
-		"mov	r2, #8\n\t"
-		".word	0xec401f06 @ mcrr p15, 0, r1, r0, c6, 0\n\t"
-		"mov	r2, #16\n\t"
-		".word	0xec401f05 @ mcrr p15, 0, r1, r0, c5, 0\n\t"
-		:
-		: "r" (PAGE_OFFSET), "r" (PAGE_OFFSET + 128)
-		: "r0", "r1", "r2");
-
-	unregister_undef_hook(&blockops_hook);
-
-	for (i = 0; i < ARRAY_SIZE(func); i++, err_pos <<= 1)
-		printk("%30s: %ssupported\n", func[i], err & err_pos ? "not " : "");
-
-	if ((err & 8) == 0) {
-		printk(" --> Using %s block cache invalidate\n",
-			cache_type & (1 << 24) ? "harvard" : "unified");
-		if (cache_type & (1 << 24))
-			cpu_cache.dma_inv_range = blk_dma_inv_range_harvard;
-		else
-			cpu_cache.dma_inv_range = blk_dma_inv_range_unified;
-	}
-	if ((err & 4) == 0) {
-		printk(" --> Using block cache clean\n");
-		cpu_cache.dma_clean_range        = blk_dma_clean_range;
-	}
-	if ((err & 2) == 0) {
-		printk(" --> Using block cache clean+invalidate\n");
-		cpu_cache.dma_flush_range        = blk_dma_flush_range;
-		cpu_cache.flush_kern_dcache_page = blk_flush_kern_dcache_page;
-	}
-
-	return 0;
-}
-
-__initcall(blockops_check);
diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
index 85c10a71e7c6..72966d90e956 100644
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@@ -18,6 +18,7 @@
 #define HARVARD_CACHE
 #define CACHE_LINE_SIZE		32
 #define D_CACHE_LINE_SIZE	32
+#define BTB_FLUSH_SIZE		8
 
 /*
  *	v6_flush_cache_all()
@@ -98,7 +99,13 @@ ENTRY(v6_coherent_user_range)
 	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I line
 #endif
 	mcr	p15, 0, r0, c7, c5, 7		@ invalidate BTB entry
-	add	r0, r0, #CACHE_LINE_SIZE
+	add	r0, r0, #BTB_FLUSH_SIZE
+	mcr	p15, 0, r0, c7, c5, 7		@ invalidate BTB entry
+	add	r0, r0, #BTB_FLUSH_SIZE
+	mcr	p15, 0, r0, c7, c5, 7		@ invalidate BTB entry
+	add	r0, r0, #BTB_FLUSH_SIZE
+	mcr	p15, 0, r0, c7, c5, 7		@ invalidate BTB entry
+	add	r0, r0, #BTB_FLUSH_SIZE
 	cmp	r0, r1
 	blo	1b
 #ifdef HARVARD_CACHE
diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c
index 26356ce4da54..dbfe9e891f01 100644
--- a/arch/arm/mm/consistent.c
+++ b/arch/arm/mm/consistent.c
@@ -66,6 +66,7 @@ struct vm_region {
 	unsigned long		vm_start;
 	unsigned long		vm_end;
 	struct page		*vm_pages;
+	int			vm_active;
 };
 
 static struct vm_region consistent_head = {
@@ -75,7 +76,7 @@ static struct vm_region consistent_head = {
 };
 
 static struct vm_region *
-vm_region_alloc(struct vm_region *head, size_t size, int gfp)
+vm_region_alloc(struct vm_region *head, size_t size, gfp_t gfp)
 {
 	unsigned long addr = head->vm_start, end = head->vm_end - size;
 	unsigned long flags;
@@ -104,6 +105,7 @@ vm_region_alloc(struct vm_region *head, size_t size, int gfp)
 	list_add_tail(&new->vm_list, &c->vm_list);
 	new->vm_start = addr;
 	new->vm_end = addr + size;
+	new->vm_active = 1;
 
 	spin_unlock_irqrestore(&consistent_lock, flags);
 	return new;
@@ -120,7 +122,7 @@ static struct vm_region *vm_region_find(struct vm_region *head, unsigned long ad
 	struct vm_region *c;
 	
 	list_for_each_entry(c, &head->vm_list, vm_list) {
-		if (c->vm_start == addr)
+		if (c->vm_active && c->vm_start == addr)
 			goto out;
 	}
 	c = NULL;
@@ -133,7 +135,7 @@ static struct vm_region *vm_region_find(struct vm_region *head, unsigned long ad
 #endif
 
 static void *
-__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, int gfp,
+__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 	    pgprot_t prot)
 {
 	struct page *page;
@@ -251,7 +253,7 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, int gfp,
  * virtual and bus address for that space.
  */
 void *
-dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, int gfp)
+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
 {
 	return __dma_alloc(dev, size, handle, gfp,
 			   pgprot_noncached(pgprot_kernel));
@@ -263,7 +265,7 @@ EXPORT_SYMBOL(dma_alloc_coherent);
  * dma_alloc_coherent above.
  */
 void *
-dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, int gfp)
+dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
 {
 	return __dma_alloc(dev, size, handle, gfp,
 			   pgprot_writecombine(pgprot_kernel));
@@ -319,6 +321,7 @@ EXPORT_SYMBOL(dma_mmap_writecombine);
 
 /*
  * free a page as defined by the above mapping.
+ * Must not be called with IRQs disabled.
  */
 void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
 {
@@ -326,14 +329,18 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr
 	unsigned long flags, addr;
 	pte_t *ptep;
 
+	WARN_ON(irqs_disabled());
+
 	size = PAGE_ALIGN(size);
 
 	spin_lock_irqsave(&consistent_lock, flags);
-
 	c = vm_region_find(&consistent_head, (unsigned long)cpu_addr);
 	if (!c)
 		goto no_area;
 
+	c->vm_active = 0;
+	spin_unlock_irqrestore(&consistent_lock, flags);
+
 	if ((c->vm_end - c->vm_start) != size) {
 		printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
 		       __func__, c->vm_end - c->vm_start, size);
@@ -372,8 +379,8 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr
 
 	flush_tlb_kernel_range(c->vm_start, c->vm_end);
 
+	spin_lock_irqsave(&consistent_lock, flags);
 	list_del(&c->vm_list);
-
 	spin_unlock_irqrestore(&consistent_lock, flags);
 
 	kfree(c);
@@ -397,8 +404,6 @@ static int __init consistent_init(void)
 	pte_t *pte;
 	int ret = 0;
 
-	spin_lock(&init_mm.page_table_lock);
-
 	do {
 		pgd = pgd_offset(&init_mm, CONSISTENT_BASE);
 		pmd = pmd_alloc(&init_mm, pgd, CONSISTENT_BASE);
@@ -409,7 +414,7 @@ static int __init consistent_init(void)
 		}
 		WARN_ON(!pmd_none(*pmd));
 
-		pte = pte_alloc_kernel(&init_mm, pmd, CONSISTENT_BASE);
+		pte = pte_alloc_kernel(pmd, CONSISTENT_BASE);
 		if (!pte) {
 			printk(KERN_ERR "%s: no pte tables\n", __func__);
 			ret = -ENOMEM;
@@ -419,8 +424,6 @@ static int __init consistent_init(void)
 		consistent_pte = pte;
 	} while (0);
 
-	spin_unlock(&init_mm.page_table_lock);
-
 	return ret;
 }
 
diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c
index 27d041574ea7..269ce6913ee9 100644
--- a/arch/arm/mm/copypage-v6.c
+++ b/arch/arm/mm/copypage-v6.c
@@ -22,9 +22,7 @@
 #endif
 
 #define from_address	(0xffff8000)
-#define from_pgprot	PAGE_KERNEL
 #define to_address	(0xffffc000)
-#define to_pgprot	PAGE_KERNEL
 
 #define TOP_PTE(x)	pte_offset_kernel(top_pmd, x)
 
@@ -34,7 +32,7 @@ static DEFINE_SPINLOCK(v6_lock);
  * Copy the user page.  No aliasing to deal with so we can just
  * attack the kernel's existing mapping of these pages.
  */
-void v6_copy_user_page_nonaliasing(void *kto, const void *kfrom, unsigned long vaddr)
+static void v6_copy_user_page_nonaliasing(void *kto, const void *kfrom, unsigned long vaddr)
 {
 	copy_page(kto, kfrom);
 }
@@ -43,7 +41,7 @@ void v6_copy_user_page_nonaliasing(void *kto, const void *kfrom, unsigned long v
  * Clear the user page.  No aliasing to deal with so we can just
  * attack the kernel's existing mapping of this page.
  */
-void v6_clear_user_page_nonaliasing(void *kaddr, unsigned long vaddr)
+static void v6_clear_user_page_nonaliasing(void *kaddr, unsigned long vaddr)
 {
 	clear_page(kaddr);
 }
@@ -51,7 +49,7 @@ void v6_clear_user_page_nonaliasing(void *kaddr, unsigned long vaddr)
 /*
  * Copy the page, taking account of the cache colour.
  */
-void v6_copy_user_page_aliasing(void *kto, const void *kfrom, unsigned long vaddr)
+static void v6_copy_user_page_aliasing(void *kto, const void *kfrom, unsigned long vaddr)
 {
 	unsigned int offset = CACHE_COLOUR(vaddr);
 	unsigned long from, to;
@@ -72,8 +70,8 @@ void v6_copy_user_page_aliasing(void *kto, const void *kfrom, unsigned long vadd
 	 */
 	spin_lock(&v6_lock);
 
-	set_pte(TOP_PTE(from_address) + offset, pfn_pte(__pa(kfrom) >> PAGE_SHIFT, from_pgprot));
-	set_pte(TOP_PTE(to_address) + offset, pfn_pte(__pa(kto) >> PAGE_SHIFT, to_pgprot));
+	set_pte(TOP_PTE(from_address) + offset, pfn_pte(__pa(kfrom) >> PAGE_SHIFT, PAGE_KERNEL));
+	set_pte(TOP_PTE(to_address) + offset, pfn_pte(__pa(kto) >> PAGE_SHIFT, PAGE_KERNEL));
 
 	from = from_address + (offset << PAGE_SHIFT);
 	to   = to_address + (offset << PAGE_SHIFT);
@@ -91,7 +89,7 @@ void v6_copy_user_page_aliasing(void *kto, const void *kfrom, unsigned long vadd
  * so remap the kernel page into the same cache colour as the user
  * page.
  */
-void v6_clear_user_page_aliasing(void *kaddr, unsigned long vaddr)
+static void v6_clear_user_page_aliasing(void *kaddr, unsigned long vaddr)
 {
 	unsigned int offset = CACHE_COLOUR(vaddr);
 	unsigned long to = to_address + (offset << PAGE_SHIFT);
@@ -112,7 +110,7 @@ void v6_clear_user_page_aliasing(void *kaddr, unsigned long vaddr)
 	 */
 	spin_lock(&v6_lock);
 
-	set_pte(TOP_PTE(to_address) + offset, pfn_pte(__pa(kaddr) >> PAGE_SHIFT, to_pgprot));
+	set_pte(TOP_PTE(to_address) + offset, pfn_pte(__pa(kaddr) >> PAGE_SHIFT, PAGE_KERNEL));
 	flush_tlb_kernel_page(to);
 	clear_page((void *)to);
 
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index be4ab3d73c91..7fc1b35a6746 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -26,6 +26,11 @@ static unsigned long shared_pte_mask = L_PTE_CACHEABLE;
 /*
  * We take the easy way out of this problem - we make the
  * PTE uncacheable.  However, we leave the write buffer on.
+ *
+ * Note that the pte lock held when calling update_mmu_cache must also
+ * guard the pte (somewhere else in the same mm) that we modify here.
+ * Therefore those configurations which might call adjust_pte (those
+ * without CONFIG_CPU_CACHE_VIPT) cannot support split page_table_lock.
  */
 static int adjust_pte(struct vm_area_struct *vma, unsigned long address)
 {
@@ -127,7 +132,7 @@ void __flush_dcache_page(struct address_space *mapping, struct page *page);
  *  2. If we have multiple shared mappings of the same space in
  *     an object, we need to deal with the cache aliasing issues.
  *
- * Note that the page_table_lock will be held.
+ * Note that the pte lock will be held.
  */
 void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
 {
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index b0208c992576..330695b6b19d 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -17,6 +17,24 @@
 
 #ifdef CONFIG_CPU_CACHE_VIPT
 
+#define ALIAS_FLUSH_START	0xffff4000
+
+#define TOP_PTE(x)	pte_offset_kernel(top_pmd, x)
+
+static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr)
+{
+	unsigned long to = ALIAS_FLUSH_START + (CACHE_COLOUR(vaddr) << PAGE_SHIFT);
+
+	set_pte(TOP_PTE(to), pfn_pte(pfn, PAGE_KERNEL));
+	flush_tlb_kernel_page(to);
+
+	asm(	"mcrr	p15, 0, %1, %0, c14\n"
+	"	mcrr	p15, 0, %1, %0, c5\n"
+	    :
+	    : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES)
+	    : "cc");
+}
+
 void flush_cache_mm(struct mm_struct *mm)
 {
 	if (cache_is_vivt()) {
@@ -67,24 +85,6 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsig
 	if (cache_is_vipt_aliasing())
 		flush_pfn_alias(pfn, user_addr);
 }
-
-#define ALIAS_FLUSH_START	0xffff4000
-
-#define TOP_PTE(x)	pte_offset_kernel(top_pmd, x)
-
-static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr)
-{
-	unsigned long to = ALIAS_FLUSH_START + (CACHE_COLOUR(vaddr) << PAGE_SHIFT);
-
-	set_pte(TOP_PTE(to), pfn_pte(pfn, PAGE_KERNEL));
-	flush_tlb_kernel_page(to);
-
-	asm(	"mcrr	p15, 0, %1, %0, c14\n"
-	"	mcrr	p15, 0, %1, %0, c5\n"
-	    :
-	    : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES)
-	    : "cc");
-}
 #else
 #define flush_pfn_alias(pfn,vaddr)	do { } while (0)
 #endif
@@ -155,14 +155,19 @@ static void __flush_dcache_aliases(struct address_space *mapping, struct page *p
  *  space mappings, we can be lazy and remember that we may have dirty
  *  kernel cache lines for later.  Otherwise, we assume we have
  *  aliasing mappings.
+ *
+ * Note that we disable the lazy flush for SMP.
  */
 void flush_dcache_page(struct page *page)
 {
 	struct address_space *mapping = page_mapping(page);
 
+#ifndef CONFIG_SMP
 	if (mapping && !mapping_mapped(mapping))
 		set_bit(PG_dcache_dirty, &page->flags);
-	else {
+	else
+#endif
+	{
 		__flush_dcache_page(mapping, page);
 		if (mapping && cache_is_vivt())
 			__flush_dcache_aliases(mapping, page);
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index edffa47a4b2a..8b276ee38acf 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -1,7 +1,7 @@
 /*
  *  linux/arch/arm/mm/init.c
  *
- *  Copyright (C) 1995-2002 Russell King
+ *  Copyright (C) 1995-2005 Russell King
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -86,14 +86,19 @@ void show_mem(void)
 	printk("%d pages swap cached\n", cached);
 }
 
-struct node_info {
-	unsigned int start;
-	unsigned int end;
-	int bootmap_pages;
-};
+static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt)
+{
+	return pmd_offset(pgd, virt);
+}
+
+static inline pmd_t *pmd_off_k(unsigned long virt)
+{
+	return pmd_off(pgd_offset_k(virt), virt);
+}
 
-#define O_PFN_DOWN(x)	((x) >> PAGE_SHIFT)
-#define O_PFN_UP(x)	(PAGE_ALIGN(x) >> PAGE_SHIFT)
+#define for_each_nodebank(iter,mi,no)			\
+	for (iter = 0; iter < mi->nr_banks; iter++)	\
+		if (mi->bank[iter].node == no)
 
 /*
  * FIXME: We really want to avoid allocating the bootmap bitmap
@@ -106,15 +111,12 @@ find_bootmap_pfn(int node, struct meminfo *mi, unsigned int bootmap_pages)
 {
 	unsigned int start_pfn, bank, bootmap_pfn;
 
-	start_pfn   = O_PFN_UP(__pa(&_end));
+	start_pfn   = PAGE_ALIGN(__pa(&_end)) >> PAGE_SHIFT;
 	bootmap_pfn = 0;
 
-	for (bank = 0; bank < mi->nr_banks; bank ++) {
+	for_each_nodebank(bank, mi, node) {
 		unsigned int start, end;
 
-		if (mi->bank[bank].node != node)
-			continue;
-
 		start = mi->bank[bank].start >> PAGE_SHIFT;
 		end   = (mi->bank[bank].size +
 			 mi->bank[bank].start) >> PAGE_SHIFT;
@@ -140,92 +142,6 @@ find_bootmap_pfn(int node, struct meminfo *mi, unsigned int bootmap_pages)
 	return bootmap_pfn;
 }
 
-/*
- * Scan the memory info structure and pull out:
- *  - the end of memory
- *  - the number of nodes
- *  - the pfn range of each node
- *  - the number of bootmem bitmap pages
- */
-static unsigned int __init
-find_memend_and_nodes(struct meminfo *mi, struct node_info *np)
-{
-	unsigned int i, bootmem_pages = 0, memend_pfn = 0;
-
-	for (i = 0; i < MAX_NUMNODES; i++) {
-		np[i].start = -1U;
-		np[i].end = 0;
-		np[i].bootmap_pages = 0;
-	}
-
-	for (i = 0; i < mi->nr_banks; i++) {
-		unsigned long start, end;
-		int node;
-
-		if (mi->bank[i].size == 0) {
-			/*
-			 * Mark this bank with an invalid node number
-			 */
-			mi->bank[i].node = -1;
-			continue;
-		}
-
-		node = mi->bank[i].node;
-
-		/*
-		 * Make sure we haven't exceeded the maximum number of nodes
-		 * that we have in this configuration.  If we have, we're in
-		 * trouble.  (maybe we ought to limit, instead of bugging?)
-		 */
-		if (node >= MAX_NUMNODES)
-			BUG();
-		node_set_online(node);
-
-		/*
-		 * Get the start and end pfns for this bank
-		 */
-		start = mi->bank[i].start >> PAGE_SHIFT;
-		end   = (mi->bank[i].start + mi->bank[i].size) >> PAGE_SHIFT;
-
-		if (np[node].start > start)
-			np[node].start = start;
-
-		if (np[node].end < end)
-			np[node].end = end;
-
-		if (memend_pfn < end)
-			memend_pfn = end;
-	}
-
-	/*
-	 * Calculate the number of pages we require to
-	 * store the bootmem bitmaps.
-	 */
-	for_each_online_node(i) {
-		if (np[i].end == 0)
-			continue;
-
-		np[i].bootmap_pages = bootmem_bootmap_pages(np[i].end -
-							    np[i].start);
-		bootmem_pages += np[i].bootmap_pages;
-	}
-
-	high_memory = __va(memend_pfn << PAGE_SHIFT);
-
-	/*
-	 * This doesn't seem to be used by the Linux memory
-	 * manager any more.  If we can get rid of it, we
-	 * also get rid of some of the stuff above as well.
-	 *
-	 * Note: max_low_pfn and max_pfn reflect the number
-	 * of _pages_ in the system, not the maximum PFN.
-	 */
-	max_low_pfn = memend_pfn - O_PFN_DOWN(PHYS_OFFSET);
-	max_pfn = memend_pfn - O_PFN_DOWN(PHYS_OFFSET);
-
-	return bootmem_pages;
-}
-
 static int __init check_initrd(struct meminfo *mi)
 {
 	int initrd_node = -2;
@@ -266,9 +182,8 @@ static int __init check_initrd(struct meminfo *mi)
 /*
  * Reserve the various regions of node 0
  */
-static __init void reserve_node_zero(unsigned int bootmap_pfn, unsigned int bootmap_pages)
+static __init void reserve_node_zero(pg_data_t *pgdat)
 {
-	pg_data_t *pgdat = NODE_DATA(0);
 	unsigned long res_size = 0;
 
 	/*
@@ -289,13 +204,6 @@ static __init void reserve_node_zero(unsigned int bootmap_pfn, unsigned int boot
 			     PTRS_PER_PGD * sizeof(pgd_t));
 
 	/*
-	 * And don't forget to reserve the allocator bitmap,
-	 * which will be freed later.
-	 */
-	reserve_bootmem_node(pgdat, bootmap_pfn << PAGE_SHIFT,
-			     bootmap_pages << PAGE_SHIFT);
-
-	/*
 	 * Hmm... This should go elsewhere, but we really really need to
 	 * stop things allocating the low memory; ideally we need a better
 	 * implementation of GFP_DMA which does not assume that DMA-able
@@ -324,183 +232,293 @@ static __init void reserve_node_zero(unsigned int bootmap_pfn, unsigned int boot
 		reserve_bootmem_node(pgdat, PHYS_OFFSET, res_size);
 }
 
-/*
- * Register all available RAM in this node with the bootmem allocator.
- */
-static inline void free_bootmem_node_bank(int node, struct meminfo *mi)
+void __init build_mem_type_table(void);
+void __init create_mapping(struct map_desc *md);
+
+static unsigned long __init
+bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
 {
-	pg_data_t *pgdat = NODE_DATA(node);
-	int bank;
+	unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES];
+	unsigned long start_pfn, end_pfn, boot_pfn;
+	unsigned int boot_pages;
+	pg_data_t *pgdat;
+	int i;
 
-	for (bank = 0; bank < mi->nr_banks; bank++)
-		if (mi->bank[bank].node == node)
-			free_bootmem_node(pgdat, mi->bank[bank].start,
-					  mi->bank[bank].size);
-}
+	start_pfn = -1UL;
+	end_pfn = 0;
 
-/*
- * Initialise the bootmem allocator for all nodes.  This is called
- * early during the architecture specific initialisation.
- */
-static void __init bootmem_init(struct meminfo *mi)
-{
-	struct node_info node_info[MAX_NUMNODES], *np = node_info;
-	unsigned int bootmap_pages, bootmap_pfn, map_pg;
-	int node, initrd_node;
+	/*
+	 * Calculate the pfn range, and map the memory banks for this node.
+	 */
+	for_each_nodebank(i, mi, node) {
+		unsigned long start, end;
+		struct map_desc map;
+
+		start = mi->bank[i].start >> PAGE_SHIFT;
+		end = (mi->bank[i].start + mi->bank[i].size) >> PAGE_SHIFT;
+
+		if (start_pfn > start)
+			start_pfn = start;
+		if (end_pfn < end)
+			end_pfn = end;
 
-	bootmap_pages = find_memend_and_nodes(mi, np);
-	bootmap_pfn   = find_bootmap_pfn(0, mi, bootmap_pages);
-	initrd_node   = check_initrd(mi);
+		map.pfn = __phys_to_pfn(mi->bank[i].start);
+		map.virtual = __phys_to_virt(mi->bank[i].start);
+		map.length = mi->bank[i].size;
+		map.type = MT_MEMORY;
 
-	map_pg = bootmap_pfn;
+		create_mapping(&map);
+	}
 
 	/*
-	 * Initialise the bootmem nodes.
-	 *
-	 * What we really want to do is:
-	 *
-	 *   unmap_all_regions_except_kernel();
-	 *   for_each_node_in_reverse_order(node) {
-	 *     map_node(node);
-	 *     allocate_bootmem_map(node);
-	 *     init_bootmem_node(node);
-	 *     free_bootmem_node(node);
-	 *   }
-	 *
-	 * but this is a 2.5-type change.  For now, we just set
-	 * the nodes up in reverse order.
-	 *
-	 * (we could also do with rolling bootmem_init and paging_init
-	 * into one generic "memory_init" type function).
+	 * If there is no memory in this node, ignore it.
 	 */
-	np += num_online_nodes() - 1;
-	for (node = num_online_nodes() - 1; node >= 0; node--, np--) {
-		/*
-		 * If there are no pages in this node, ignore it.
-		 * Note that node 0 must always have some pages.
-		 */
-		if (np->end == 0 || !node_online(node)) {
-			if (node == 0)
-				BUG();
-			continue;
-		}
+	if (end_pfn == 0)
+		return end_pfn;
 
-		/*
-		 * Initialise the bootmem allocator.
-		 */
-		init_bootmem_node(NODE_DATA(node), map_pg, np->start, np->end);
-		free_bootmem_node_bank(node, mi);
-		map_pg += np->bootmap_pages;
+	/*
+	 * Allocate the bootmem bitmap page.
+	 */
+	boot_pages = bootmem_bootmap_pages(end_pfn - start_pfn);
+	boot_pfn = find_bootmap_pfn(node, mi, boot_pages);
 
-		/*
-		 * If this is node 0, we need to reserve some areas ASAP -
-		 * we may use bootmem on node 0 to setup the other nodes.
-		 */
-		if (node == 0)
-			reserve_node_zero(bootmap_pfn, bootmap_pages);
-	}
+	/*
+	 * Initialise the bootmem allocator for this node, handing the
+	 * memory banks over to bootmem.
+	 */
+	node_set_online(node);
+	pgdat = NODE_DATA(node);
+	init_bootmem_node(pgdat, boot_pfn, start_pfn, end_pfn);
 
+	for_each_nodebank(i, mi, node)
+		free_bootmem_node(pgdat, mi->bank[i].start, mi->bank[i].size);
+
+	/*
+	 * Reserve the bootmem bitmap for this node.
+	 */
+	reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT,
+			     boot_pages << PAGE_SHIFT);
 
 #ifdef CONFIG_BLK_DEV_INITRD
-	if (phys_initrd_size && initrd_node >= 0) {
-		reserve_bootmem_node(NODE_DATA(initrd_node), phys_initrd_start,
+	/*
+	 * If the initrd is in this node, reserve its memory.
+	 */
+	if (node == initrd_node) {
+		reserve_bootmem_node(pgdat, phys_initrd_start,
 				     phys_initrd_size);
 		initrd_start = __phys_to_virt(phys_initrd_start);
 		initrd_end = initrd_start + phys_initrd_size;
 	}
 #endif
 
-	BUG_ON(map_pg != bootmap_pfn + bootmap_pages);
+	/*
+	 * Finally, reserve any node zero regions.
+	 */
+	if (node == 0)
+		reserve_node_zero(pgdat);
+
+	/*
+	 * initialise the zones within this node.
+	 */
+	memset(zone_size, 0, sizeof(zone_size));
+	memset(zhole_size, 0, sizeof(zhole_size));
+
+	/*
+	 * The size of this node has already been determined.  If we need
+	 * to do anything fancy with the allocation of this memory to the
+	 * zones, now is the time to do it.
+	 */
+	zone_size[0] = end_pfn - start_pfn;
+
+	/*
+	 * For each bank in this node, calculate the size of the holes.
+	 *  holes = node_size - sum(bank_sizes_in_node)
+	 */
+	zhole_size[0] = zone_size[0];
+	for_each_nodebank(i, mi, node)
+		zhole_size[0] -= mi->bank[i].size >> PAGE_SHIFT;
+
+	/*
+	 * Adjust the sizes according to any special requirements for
+	 * this machine type.
+	 */
+	arch_adjust_zones(node, zone_size, zhole_size);
+
+	free_area_init_node(node, pgdat, zone_size, start_pfn, zhole_size);
+
+	return end_pfn;
 }
 
-/*
- * paging_init() sets up the page tables, initialises the zone memory
- * maps, and sets up the zero page, bad page and bad page tables.
- */
-void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc)
+static void __init bootmem_init(struct meminfo *mi)
 {
-	void *zero_page;
-	int node;
+	unsigned long addr, memend_pfn = 0;
+	int node, initrd_node, i;
 
-	bootmem_init(mi);
+	/*
+	 * Invalidate the node number for empty or invalid memory banks
+	 */
+	for (i = 0; i < mi->nr_banks; i++)
+		if (mi->bank[i].size == 0 || mi->bank[i].node >= MAX_NUMNODES)
+			mi->bank[i].node = -1;
 
 	memcpy(&meminfo, mi, sizeof(meminfo));
 
 	/*
-	 * allocate the zero page.  Note that we count on this going ok.
+	 * Clear out all the mappings below the kernel image.
 	 */
-	zero_page = alloc_bootmem_low_pages(PAGE_SIZE);
+	for (addr = 0; addr < MODULE_START; addr += PGDIR_SIZE)
+		pmd_clear(pmd_off_k(addr));
+#ifdef CONFIG_XIP_KERNEL
+	/* The XIP kernel is mapped in the module area -- skip over it */
+	addr = ((unsigned long)&_etext + PGDIR_SIZE - 1) & PGDIR_MASK;
+#endif
+	for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE)
+		pmd_clear(pmd_off_k(addr));
 
 	/*
-	 * initialise the page tables.
+	 * Clear out all the kernel space mappings, except for the first
+	 * memory bank, up to the end of the vmalloc region.
 	 */
-	memtable_init(mi);
-	if (mdesc->map_io)
-		mdesc->map_io();
-	local_flush_tlb_all();
+	for (addr = __phys_to_virt(mi->bank[0].start + mi->bank[0].size);
+	     addr < VMALLOC_END; addr += PGDIR_SIZE)
+		pmd_clear(pmd_off_k(addr));
 
 	/*
-	 * initialise the zones within each node
+	 * Locate which node contains the ramdisk image, if any.
 	 */
-	for_each_online_node(node) {
-		unsigned long zone_size[MAX_NR_ZONES];
-		unsigned long zhole_size[MAX_NR_ZONES];
-		struct bootmem_data *bdata;
-		pg_data_t *pgdat;
-		int i;
+	initrd_node = check_initrd(mi);
 
-		/*
-		 * Initialise the zone size information.
-		 */
-		for (i = 0; i < MAX_NR_ZONES; i++) {
-			zone_size[i]  = 0;
-			zhole_size[i] = 0;
-		}
+	/*
+	 * Run through each node initialising the bootmem allocator.
+	 */
+	for_each_node(node) {
+		unsigned long end_pfn;
 
-		pgdat = NODE_DATA(node);
-		bdata = pgdat->bdata;
+		end_pfn = bootmem_init_node(node, initrd_node, mi);
 
 		/*
-		 * The size of this node has already been determined.
-		 * If we need to do anything fancy with the allocation
-		 * of this memory to the zones, now is the time to do
-		 * it.
+		 * Remember the highest memory PFN.
 		 */
-		zone_size[0] = bdata->node_low_pfn -
-				(bdata->node_boot_start >> PAGE_SHIFT);
+		if (end_pfn > memend_pfn)
+			memend_pfn = end_pfn;
+	}
 
-		/*
-		 * If this zone has zero size, skip it.
-		 */
-		if (!zone_size[0])
-			continue;
+	high_memory = __va(memend_pfn << PAGE_SHIFT);
 
-		/*
-		 * For each bank in this node, calculate the size of the
-		 * holes.  holes = node_size - sum(bank_sizes_in_node)
-		 */
-		zhole_size[0] = zone_size[0];
-		for (i = 0; i < mi->nr_banks; i++) {
-			if (mi->bank[i].node != node)
-				continue;
+	/*
+	 * This doesn't seem to be used by the Linux memory manager any
+	 * more, but is used by ll_rw_block.  If we can get rid of it, we
+	 * also get rid of some of the stuff above as well.
+	 *
+	 * Note: max_low_pfn and max_pfn reflect the number of _pages_ in
+	 * the system, not the maximum PFN.
+	 */
+	max_pfn = max_low_pfn = memend_pfn - PHYS_PFN_OFFSET;
+}
 
-			zhole_size[0] -= mi->bank[i].size >> PAGE_SHIFT;
-		}
+/*
+ * Set up device the mappings.  Since we clear out the page tables for all
+ * mappings above VMALLOC_END, we will remove any debug device mappings.
+ * This means you have to be careful how you debug this function, or any
+ * called function.  This means you can't use any function or debugging
+ * method which may touch any device, otherwise the kernel _will_ crash.
+ */
+static void __init devicemaps_init(struct machine_desc *mdesc)
+{
+	struct map_desc map;
+	unsigned long addr;
+	void *vectors;
 
-		/*
-		 * Adjust the sizes according to any special
-		 * requirements for this machine type.
-		 */
-		arch_adjust_zones(node, zone_size, zhole_size);
+	/*
+	 * Allocate the vector page early.
+	 */
+	vectors = alloc_bootmem_low_pages(PAGE_SIZE);
+	BUG_ON(!vectors);
+
+	for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
+		pmd_clear(pmd_off_k(addr));
 
-		free_area_init_node(node, pgdat, zone_size,
-				bdata->node_boot_start >> PAGE_SHIFT, zhole_size);
+	/*
+	 * Map the kernel if it is XIP.
+	 * It is always first in the modulearea.
+	 */
+#ifdef CONFIG_XIP_KERNEL
+	map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & PGDIR_MASK);
+	map.virtual = MODULE_START;
+	map.length = ((unsigned long)&_etext - map.virtual + ~PGDIR_MASK) & PGDIR_MASK;
+	map.type = MT_ROM;
+	create_mapping(&map);
+#endif
+
+	/*
+	 * Map the cache flushing regions.
+	 */
+#ifdef FLUSH_BASE
+	map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS);
+	map.virtual = FLUSH_BASE;
+	map.length = PGDIR_SIZE;
+	map.type = MT_CACHECLEAN;
+	create_mapping(&map);
+#endif
+#ifdef FLUSH_BASE_MINICACHE
+	map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS + PGDIR_SIZE);
+	map.virtual = FLUSH_BASE_MINICACHE;
+	map.length = PGDIR_SIZE;
+	map.type = MT_MINICLEAN;
+	create_mapping(&map);
+#endif
+
+	/*
+	 * Create a mapping for the machine vectors at the high-vectors
+	 * location (0xffff0000).  If we aren't using high-vectors, also
+	 * create a mapping at the low-vectors virtual address.
+	 */
+	map.pfn = __phys_to_pfn(virt_to_phys(vectors));
+	map.virtual = 0xffff0000;
+	map.length = PAGE_SIZE;
+	map.type = MT_HIGH_VECTORS;
+	create_mapping(&map);
+
+	if (!vectors_high()) {
+		map.virtual = 0;
+		map.type = MT_LOW_VECTORS;
+		create_mapping(&map);
 	}
 
 	/*
-	 * finish off the bad pages once
-	 * the mem_map is initialised
+	 * Ask the machine support to map in the statically mapped devices.
+	 */
+	if (mdesc->map_io)
+		mdesc->map_io();
+
+	/*
+	 * Finally flush the caches and tlb to ensure that we're in a
+	 * consistent state wrt the writebuffer.  This also ensures that
+	 * any write-allocated cache lines in the vector page are written
+	 * back.  After this point, we can start to touch devices again.
 	 */
+	local_flush_tlb_all();
+	flush_cache_all();
+}
+
+/*
+ * paging_init() sets up the page tables, initialises the zone memory
+ * maps, and sets up the zero page, bad page and bad page tables.
+ */
+void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc)
+{
+	void *zero_page;
+
+	build_mem_type_table();
+	bootmem_init(mi);
+	devicemaps_init(mdesc);
+
+	top_pmd = pmd_off_k(0xffff0000);
+
+	/*
+	 * allocate the zero page.  Note that we count on this going ok.
+	 */
+	zero_page = alloc_bootmem_low_pages(PAGE_SIZE);
 	memzero(zero_page, PAGE_SIZE);
 	empty_zero_page = virt_to_page(zero_page);
 	flush_dcache_page(empty_zero_page);
@@ -562,10 +580,7 @@ static void __init free_unused_memmap_node(int node, struct meminfo *mi)
 	 * may not be the case, especially if the user has provided the
 	 * information on the command line.
 	 */
-	for (i = 0; i < mi->nr_banks; i++) {
-		if (mi->bank[i].size == 0 || mi->bank[i].node != node)
-			continue;
-
+	for_each_nodebank(i, mi, node) {
 		bank_start = mi->bank[i].start >> PAGE_SHIFT;
 		if (bank_start < prev_bank_end) {
 			printk(KERN_ERR "MEM: unordered memory banks.  "
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 7110e54182b1..10901398e4a2 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -26,6 +26,7 @@
 #include <linux/vmalloc.h>
 
 #include <asm/cacheflush.h>
+#include <asm/hardware.h>
 #include <asm/io.h>
 #include <asm/tlbflush.h>
 
@@ -74,7 +75,7 @@ remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned long size,
 
 	pgprot = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | L_PTE_WRITE | flags);
 	do {
-		pte_t * pte = pte_alloc_kernel(&init_mm, pmd, address);
+		pte_t * pte = pte_alloc_kernel(pmd, address);
 		if (!pte)
 			return -ENOMEM;
 		remap_area_pte(pte, address, end - address, address + phys_addr, pgprot);
@@ -96,7 +97,6 @@ remap_area_pages(unsigned long start, unsigned long phys_addr,
 	phys_addr -= address;
 	dir = pgd_offset(&init_mm, address);
 	BUG_ON(address >= end);
-	spin_lock(&init_mm.page_table_lock);
 	do {
 		pmd_t *pmd = pmd_alloc(&init_mm, dir, address);
 		if (!pmd) {
@@ -113,7 +113,6 @@ remap_area_pages(unsigned long start, unsigned long phys_addr,
 		dir++;
 	} while (address && (address < end));
 
-	spin_unlock(&init_mm.page_table_lock);
 	flush_cache_vmap(start, end);
 	return err;
 }
@@ -131,8 +130,7 @@ remap_area_pages(unsigned long start, unsigned long phys_addr,
  * mapping.  See include/asm-arm/proc-armv/pgtable.h for more information.
  */
 void __iomem *
-__ioremap(unsigned long phys_addr, size_t size, unsigned long flags,
-	  unsigned long align)
+__ioremap(unsigned long phys_addr, size_t size, unsigned long flags)
 {
 	void * addr;
 	struct vm_struct * area;
diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c
index d125a3dc061c..9e50127be635 100644
--- a/arch/arm/mm/mm-armv.c
+++ b/arch/arm/mm/mm-armv.c
@@ -1,7 +1,7 @@
 /*
  *  linux/arch/arm/mm/mm-armv.c
  *
- *  Copyright (C) 1998-2002 Russell King
+ *  Copyright (C) 1998-2005 Russell King
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -180,11 +180,6 @@ pgd_t *get_pgd_slow(struct mm_struct *mm)
 
 	if (!vectors_high()) {
 		/*
-		 * This lock is here just to satisfy pmd_alloc and pte_lock
-		 */
-		spin_lock(&mm->page_table_lock);
-
-		/*
 		 * On ARM, first page must always be allocated since it
 		 * contains the machine vectors.
 		 */
@@ -201,23 +196,14 @@ pgd_t *get_pgd_slow(struct mm_struct *mm)
 		set_pte(new_pte, *init_pte);
 		pte_unmap_nested(init_pte);
 		pte_unmap(new_pte);
-
-		spin_unlock(&mm->page_table_lock);
 	}
 
 	return new_pgd;
 
 no_pte:
-	spin_unlock(&mm->page_table_lock);
 	pmd_free(new_pmd);
-	free_pages((unsigned long)new_pgd, 2);
-	return NULL;
-
 no_pmd:
-	spin_unlock(&mm->page_table_lock);
 	free_pages((unsigned long)new_pgd, 2);
-	return NULL;
-
 no_pgd:
 	return NULL;
 }
@@ -243,6 +229,7 @@ void free_pgd_slow(pgd_t *pgd)
 	pte = pmd_page(*pmd);
 	pmd_clear(pmd);
 	dec_page_state(nr_page_table_pages);
+	pte_lock_deinit(pte);
 	pte_free(pte);
 	pmd_free(pmd);
 free:
@@ -305,16 +292,6 @@ alloc_init_page(unsigned long virt, unsigned long phys, unsigned int prot_l1, pg
 	set_pte(ptep, pfn_pte(phys >> PAGE_SHIFT, prot));
 }
 
-/*
- * Clear any PGD mapping.  On a two-level page table system,
- * the clearance is done by the middle-level functions (pmd)
- * rather than the top-level (pgd) functions.
- */
-static inline void clear_mapping(unsigned long virt)
-{
-	pmd_clear(pmd_off_k(virt));
-}
-
 struct mem_types {
 	unsigned int	prot_pte;
 	unsigned int	prot_l1;
@@ -373,11 +350,11 @@ static struct mem_types mem_types[] __initdata = {
 /*
  * Adjust the PMD section entries according to the CPU in use.
  */
-static void __init build_mem_type_table(void)
+void __init build_mem_type_table(void)
 {
 	struct cachepolicy *cp;
 	unsigned int cr = get_cr();
-	unsigned int user_pgprot;
+	unsigned int user_pgprot, kern_pgprot;
 	int cpu_arch = cpu_architecture();
 	int i;
 
@@ -404,7 +381,7 @@ static void __init build_mem_type_table(void)
 	}
 
 	cp = &cache_policies[cachepolicy];
-	user_pgprot = cp->pte;
+	kern_pgprot = user_pgprot = cp->pte;
 
 	/*
 	 * ARMv6 and above have extended page tables.
@@ -416,6 +393,7 @@ static void __init build_mem_type_table(void)
 		 */
 		mem_types[MT_MEMORY].prot_sect &= ~PMD_BIT4;
 		mem_types[MT_ROM].prot_sect &= ~PMD_BIT4;
+
 		/*
 		 * Mark cache clean areas and XIP ROM read only
 		 * from SVC mode and no access from userspace.
@@ -435,32 +413,47 @@ static void __init build_mem_type_table(void)
 		 * (iow, non-global)
 		 */
 		user_pgprot |= L_PTE_ASID;
+
+#ifdef CONFIG_SMP
+		/*
+		 * Mark memory with the "shared" attribute for SMP systems
+		 */
+		user_pgprot |= L_PTE_SHARED;
+		kern_pgprot |= L_PTE_SHARED;
+		mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
+#endif
 	}
 
+	for (i = 0; i < 16; i++) {
+		unsigned long v = pgprot_val(protection_map[i]);
+		v = (v & ~(L_PTE_BUFFERABLE|L_PTE_CACHEABLE)) | user_pgprot;
+		protection_map[i] = __pgprot(v);
+	}
+
+	mem_types[MT_LOW_VECTORS].prot_pte |= kern_pgprot;
+	mem_types[MT_HIGH_VECTORS].prot_pte |= kern_pgprot;
+
 	if (cpu_arch >= CPU_ARCH_ARMv5) {
-		mem_types[MT_LOW_VECTORS].prot_pte |= cp->pte & PTE_CACHEABLE;
-		mem_types[MT_HIGH_VECTORS].prot_pte |= cp->pte & PTE_CACHEABLE;
+#ifndef CONFIG_SMP
+		/*
+		 * Only use write-through for non-SMP systems
+		 */
+		mem_types[MT_LOW_VECTORS].prot_pte &= ~L_PTE_BUFFERABLE;
+		mem_types[MT_HIGH_VECTORS].prot_pte &= ~L_PTE_BUFFERABLE;
+#endif
 	} else {
-		mem_types[MT_LOW_VECTORS].prot_pte |= cp->pte;
-		mem_types[MT_HIGH_VECTORS].prot_pte |= cp->pte;
 		mem_types[MT_MINICLEAN].prot_sect &= ~PMD_SECT_TEX(1);
 	}
 
+	pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG |
+				 L_PTE_DIRTY | L_PTE_WRITE |
+				 L_PTE_EXEC | kern_pgprot);
+
 	mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask;
 	mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask;
 	mem_types[MT_MEMORY].prot_sect |= ecc_mask | cp->pmd;
 	mem_types[MT_ROM].prot_sect |= cp->pmd;
 
-	for (i = 0; i < 16; i++) {
-		unsigned long v = pgprot_val(protection_map[i]);
-		v = (v & ~(PTE_BUFFERABLE|PTE_CACHEABLE)) | user_pgprot;
-		protection_map[i] = __pgprot(v);
-	}
-
-	pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG |
-				 L_PTE_DIRTY | L_PTE_WRITE |
-				 L_PTE_EXEC | cp->pte);
-
 	switch (cp->pmd) {
 	case PMD_SECT_WT:
 		mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WT;
@@ -483,25 +476,25 @@ static void __init build_mem_type_table(void)
  * offsets, and we take full advantage of sections and
  * supersections.
  */
-static void __init create_mapping(struct map_desc *md)
+void __init create_mapping(struct map_desc *md)
 {
 	unsigned long virt, length;
 	int prot_sect, prot_l1, domain;
 	pgprot_t prot_pte;
-	long off;
+	unsigned long off = (u32)__pfn_to_phys(md->pfn);
 
 	if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) {
 		printk(KERN_WARNING "BUG: not creating mapping for "
-		       "0x%08lx at 0x%08lx in user region\n",
-		       md->physical, md->virtual);
+		       "0x%08llx at 0x%08lx in user region\n",
+		       __pfn_to_phys((u64)md->pfn), md->virtual);
 		return;
 	}
 
 	if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
 	    md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) {
-		printk(KERN_WARNING "BUG: mapping for 0x%08lx at 0x%08lx "
+		printk(KERN_WARNING "BUG: mapping for 0x%08llx at 0x%08lx "
 		       "overlaps vmalloc space\n",
-		       md->physical, md->virtual);
+		       __pfn_to_phys((u64)md->pfn), md->virtual);
 	}
 
 	domain	  = mem_types[md->type].domain;
@@ -509,15 +502,40 @@ static void __init create_mapping(struct map_desc *md)
 	prot_l1   = mem_types[md->type].prot_l1 | PMD_DOMAIN(domain);
 	prot_sect = mem_types[md->type].prot_sect | PMD_DOMAIN(domain);
 
+	/*
+	 * Catch 36-bit addresses
+	 */
+	if(md->pfn >= 0x100000) {
+		if(domain) {
+			printk(KERN_ERR "MM: invalid domain in supersection "
+				"mapping for 0x%08llx at 0x%08lx\n",
+				__pfn_to_phys((u64)md->pfn), md->virtual);
+			return;
+		}
+		if((md->virtual | md->length | __pfn_to_phys(md->pfn))
+			& ~SUPERSECTION_MASK) {
+			printk(KERN_ERR "MM: cannot create mapping for "
+				"0x%08llx at 0x%08lx invalid alignment\n",
+				__pfn_to_phys((u64)md->pfn), md->virtual);
+			return;
+		}
+
+		/*
+		 * Shift bits [35:32] of address into bits [23:20] of PMD
+		 * (See ARMv6 spec).
+		 */
+		off |= (((md->pfn >> (32 - PAGE_SHIFT)) & 0xF) << 20);
+	}
+
 	virt   = md->virtual;
-	off    = md->physical - virt;
+	off   -= virt;
 	length = md->length;
 
 	if (mem_types[md->type].prot_l1 == 0 &&
 	    (virt & 0xfffff || (virt + off) & 0xfffff || (virt + length) & 0xfffff)) {
 		printk(KERN_WARNING "BUG: map for 0x%08lx at 0x%08lx can not "
 		       "be mapped using pages, ignoring.\n",
-		       md->physical, md->virtual);
+		       __pfn_to_phys(md->pfn), md->virtual);
 		return;
 	}
 
@@ -535,13 +553,22 @@ static void __init create_mapping(struct map_desc *md)
 	 *	of the actual domain assignments in use.
 	 */
 	if (cpu_architecture() >= CPU_ARCH_ARMv6 && domain == 0) {
-		/* Align to supersection boundary */
-		while ((virt & ~SUPERSECTION_MASK || (virt + off) &
-			~SUPERSECTION_MASK) && length >= (PGDIR_SIZE / 2)) {
-			alloc_init_section(virt, virt + off, prot_sect);
-
-			virt   += (PGDIR_SIZE / 2);
-			length -= (PGDIR_SIZE / 2);
+		/*
+		 * Align to supersection boundary if !high pages.
+		 * High pages have already been checked for proper
+		 * alignment above and they will fail the SUPSERSECTION_MASK
+		 * check because of the way the address is encoded into
+		 * offset.
+		 */
+		if (md->pfn <= 0x100000) {
+			while ((virt & ~SUPERSECTION_MASK ||
+			        (virt + off) & ~SUPERSECTION_MASK) &&
+				length >= (PGDIR_SIZE / 2)) {
+				alloc_init_section(virt, virt + off, prot_sect);
+
+				virt   += (PGDIR_SIZE / 2);
+				length -= (PGDIR_SIZE / 2);
+			}
 		}
 
 		while (length >= SUPERSECTION_SIZE) {
@@ -601,100 +628,6 @@ void setup_mm_for_reboot(char mode)
 	}
 }
 
-extern void _stext, _etext;
-
-/*
- * Setup initial mappings.  We use the page we allocated for zero page to hold
- * the mappings, which will get overwritten by the vectors in traps_init().
- * The mappings must be in virtual address order.
- */
-void __init memtable_init(struct meminfo *mi)
-{
-	struct map_desc *init_maps, *p, *q;
-	unsigned long address = 0;
-	int i;
-
-	build_mem_type_table();
-
-	init_maps = p = alloc_bootmem_low_pages(PAGE_SIZE);
-
-#ifdef CONFIG_XIP_KERNEL
-	p->physical   = CONFIG_XIP_PHYS_ADDR & PMD_MASK;
-	p->virtual    = (unsigned long)&_stext & PMD_MASK;
-	p->length     = ((unsigned long)&_etext - p->virtual + ~PMD_MASK) & PMD_MASK;
-	p->type       = MT_ROM;
-	p ++;
-#endif
-
-	for (i = 0; i < mi->nr_banks; i++) {
-		if (mi->bank[i].size == 0)
-			continue;
-
-		p->physical   = mi->bank[i].start;
-		p->virtual    = __phys_to_virt(p->physical);
-		p->length     = mi->bank[i].size;
-		p->type       = MT_MEMORY;
-		p ++;
-	}
-
-#ifdef FLUSH_BASE
-	p->physical   = FLUSH_BASE_PHYS;
-	p->virtual    = FLUSH_BASE;
-	p->length     = PGDIR_SIZE;
-	p->type       = MT_CACHECLEAN;
-	p ++;
-#endif
-
-#ifdef FLUSH_BASE_MINICACHE
-	p->physical   = FLUSH_BASE_PHYS + PGDIR_SIZE;
-	p->virtual    = FLUSH_BASE_MINICACHE;
-	p->length     = PGDIR_SIZE;
-	p->type       = MT_MINICLEAN;
-	p ++;
-#endif
-
-	/*
-	 * Go through the initial mappings, but clear out any
-	 * pgdir entries that are not in the description.
-	 */
-	q = init_maps;
-	do {
-		if (address < q->virtual || q == p) {
-			clear_mapping(address);
-			address += PGDIR_SIZE;
-		} else {
-			create_mapping(q);
-
-			address = q->virtual + q->length;
-			address = (address + PGDIR_SIZE - 1) & PGDIR_MASK;
-
-			q ++;
-		}
-	} while (address != 0);
-
-	/*
-	 * Create a mapping for the machine vectors at the high-vectors
-	 * location (0xffff0000).  If we aren't using high-vectors, also
-	 * create a mapping at the low-vectors virtual address.
-	 */
-	init_maps->physical   = virt_to_phys(init_maps);
-	init_maps->virtual    = 0xffff0000;
-	init_maps->length     = PAGE_SIZE;
-	init_maps->type       = MT_HIGH_VECTORS;
-	create_mapping(init_maps);
-
-	if (!vectors_high()) {
-		init_maps->virtual = 0;
-		init_maps->type = MT_LOW_VECTORS;
-		create_mapping(init_maps);
-	}
-
-	flush_cache_all();
-	local_flush_tlb_all();
-
-	top_pmd = pmd_off_k(0xffff0000);
-}
-
 /*
  * Create the architecture specific mappings
  */
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index caf3b19b167f..92f3ca31b7b9 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -12,6 +12,7 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
+#include <asm/hardware/arm_scu.h>
 #include <asm/procinfo.h>
 #include <asm/pgtable.h>
 
@@ -55,7 +56,14 @@ ENTRY(cpu_v6_proc_init)
 	mov	pc, lr
 
 ENTRY(cpu_v6_proc_fin)
-	mov	pc, lr
+	stmfd	sp!, {lr}
+	cpsid	if				@ disable interrupts
+	bl	v6_flush_kern_cache_all
+	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
+	bic	r0, r0, #0x1000			@ ...i............
+	bic	r0, r0, #0x0006			@ .............ca.
+	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
+	ldmfd	sp!, {pc}
 
 /*
  *	cpu_v6_reset(loc)
@@ -105,6 +113,9 @@ ENTRY(cpu_v6_dcache_clean_area)
 ENTRY(cpu_v6_switch_mm)
 	mov	r2, #0
 	ldr	r1, [r1, #MM_CONTEXT_ID]	@ get mm->context.id
+#ifdef CONFIG_SMP
+	orr	r0, r0, #2			@ set shared pgtable
+#endif
 	mcr	p15, 0, r2, c7, c5, 6		@ flush BTAC/BTB
 	mcr	p15, 0, r2, c7, c10, 4		@ drain write buffer
 	mcr	p15, 0, r0, c2, c0, 0		@ set TTB 0
@@ -133,7 +144,7 @@ ENTRY(cpu_v6_switch_mm)
 ENTRY(cpu_v6_set_pte)
 	str	r1, [r0], #-2048		@ linux version
 
-	bic	r2, r1, #0x000007f0
+	bic	r2, r1, #0x000003f0
 	bic	r2, r2, #0x00000003
 	orr	r2, r2, #PTE_EXT_AP0 | 2
 
@@ -184,6 +195,23 @@ cpu_v6_name:
  *	- cache type register is implemented
  */
 __v6_setup:
+#ifdef CONFIG_SMP
+	/* Set up the SCU on core 0 only */
+	mrc	p15, 0, r0, c0, c0, 5		@ CPU core number
+	ands	r0, r0, #15
+	moveq	r0, #0x10000000 @ SCU_BASE
+	orreq	r0, r0, #0x00100000
+	ldreq	r5, [r0, #SCU_CTRL]
+	orreq	r5, r5, #1
+	streq	r5, [r0, #SCU_CTRL]
+
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+	mrc	p15, 0, r0, c1, c0, 1		@ Enable SMP/nAMP mode
+	orr	r0, r0, #0x20
+	mcr	p15, 0, r0, c1, c0, 1
+#endif
+#endif
+
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c14, 0		@ clean+invalidate D cache
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
@@ -191,6 +219,9 @@ __v6_setup:
 	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
 	mcr	p15, 0, r0, c8, c7, 0		@ invalidate I + D TLBs
 	mcr	p15, 0, r0, c2, c0, 2		@ TTB control register
+#ifdef CONFIG_SMP
+	orr	r4, r4, #2			@ set shared pgtable
+#endif
 	mcr	p15, 0, r4, c2, c0, 1		@ load TTB1
 #ifdef CONFIG_VFP
 	mrc	p15, 0, r0, c1, c0, 2
diff --git a/arch/arm/nwfpe/fpa11.c b/arch/arm/nwfpe/fpa11.c
index 7690f731ee87..7b3d74d73c80 100644
--- a/arch/arm/nwfpe/fpa11.c
+++ b/arch/arm/nwfpe/fpa11.c
@@ -31,11 +31,6 @@
 #include <linux/string.h>
 #include <asm/system.h>
 
-/* forward declarations */
-unsigned int EmulateCPDO(const unsigned int);
-unsigned int EmulateCPDT(const unsigned int);
-unsigned int EmulateCPRT(const unsigned int);
-
 /* Reset the FPA11 chip.  Called to initialize and reset the emulator. */
 static void resetFPA11(void)
 {
diff --git a/arch/arm/nwfpe/fpa11.h b/arch/arm/nwfpe/fpa11.h
index 93523ae4b7a1..da4c616b6c49 100644
--- a/arch/arm/nwfpe/fpa11.h
+++ b/arch/arm/nwfpe/fpa11.h
@@ -60,7 +60,7 @@ typedef union tagFPREG {
 #ifdef CONFIG_FPE_NWFPE_XP
 	floatx80 fExtended;
 #else
-	int padding[3];
+	u32 padding[3];
 #endif
 } FPREG;
 
@@ -95,4 +95,24 @@ extern int8 SetRoundingMode(const unsigned int);
 extern int8 SetRoundingPrecision(const unsigned int);
 extern void nwfpe_init_fpa(union fp_state *fp);
 
+extern unsigned int EmulateAll(unsigned int opcode);
+
+extern unsigned int EmulateCPDT(const unsigned int opcode);
+extern unsigned int EmulateCPDO(const unsigned int opcode);
+extern unsigned int EmulateCPRT(const unsigned int opcode);
+
+/* fpa11_cpdt.c */
+extern unsigned int PerformLDF(const unsigned int opcode);
+extern unsigned int PerformSTF(const unsigned int opcode);
+extern unsigned int PerformLFM(const unsigned int opcode);
+extern unsigned int PerformSFM(const unsigned int opcode);
+
+/* single_cpdo.c */
+
+extern unsigned int SingleCPDO(struct roundingData *roundData,
+			       const unsigned int opcode, FPREG * rFd);
+/* double_cpdo.c */
+extern unsigned int DoubleCPDO(struct roundingData *roundData,
+			       const unsigned int opcode, FPREG * rFd);
+
 #endif
diff --git a/arch/arm/nwfpe/fpa11_cpdt.c b/arch/arm/nwfpe/fpa11_cpdt.c
index b0db5cbcc3b1..32859fa8dcfc 100644
--- a/arch/arm/nwfpe/fpa11_cpdt.c
+++ b/arch/arm/nwfpe/fpa11_cpdt.c
@@ -59,8 +59,13 @@ static inline void loadExtended(const unsigned int Fn, const unsigned int __user
 	p = (unsigned int *) &fpa11->fpreg[Fn].fExtended;
 	fpa11->fType[Fn] = typeExtended;
 	get_user(p[0], &pMem[0]);	/* sign & exponent */
+#ifdef __ARMEB__
+	get_user(p[1], &pMem[1]);	/* ms bits */
+	get_user(p[2], &pMem[2]);	/* ls bits */
+#else
 	get_user(p[1], &pMem[2]);	/* ls bits */
 	get_user(p[2], &pMem[1]);	/* ms bits */
+#endif
 }
 #endif
 
@@ -177,8 +182,13 @@ static inline void storeExtended(const unsigned int Fn, unsigned int __user *pMe
 	}
 
 	put_user(val.i[0], &pMem[0]);	/* sign & exp */
+#ifdef __ARMEB__
+	put_user(val.i[1], &pMem[1]);	/* msw */
+	put_user(val.i[2], &pMem[2]);
+#else
 	put_user(val.i[1], &pMem[2]);
 	put_user(val.i[2], &pMem[1]);	/* msw */
+#endif
 }
 #endif
 
diff --git a/arch/arm/nwfpe/fpa11_cprt.c b/arch/arm/nwfpe/fpa11_cprt.c
index adf8d3000540..7c67023655e4 100644
--- a/arch/arm/nwfpe/fpa11_cprt.c
+++ b/arch/arm/nwfpe/fpa11_cprt.c
@@ -26,12 +26,11 @@
 #include "fpa11.inl"
 #include "fpmodule.h"
 #include "fpmodule.inl"
+#include "softfloat.h"
 
 #ifdef CONFIG_FPE_NWFPE_XP
 extern flag floatx80_is_nan(floatx80);
 #endif
-extern flag float64_is_nan(float64);
-extern flag float32_is_nan(float32);
 
 unsigned int PerformFLT(const unsigned int opcode);
 unsigned int PerformFIX(const unsigned int opcode);
diff --git a/arch/arm/nwfpe/fpopcode.c b/arch/arm/nwfpe/fpopcode.c
index 4c9f5703148c..67ff2ab08ea0 100644
--- a/arch/arm/nwfpe/fpopcode.c
+++ b/arch/arm/nwfpe/fpopcode.c
@@ -29,14 +29,14 @@
 
 #ifdef CONFIG_FPE_NWFPE_XP
 const floatx80 floatx80Constant[] = {
-	{0x0000, 0x0000000000000000ULL},	/* extended 0.0 */
-	{0x3fff, 0x8000000000000000ULL},	/* extended 1.0 */
-	{0x4000, 0x8000000000000000ULL},	/* extended 2.0 */
-	{0x4000, 0xc000000000000000ULL},	/* extended 3.0 */
-	{0x4001, 0x8000000000000000ULL},	/* extended 4.0 */
-	{0x4001, 0xa000000000000000ULL},	/* extended 5.0 */
-	{0x3ffe, 0x8000000000000000ULL},	/* extended 0.5 */
-	{0x4002, 0xa000000000000000ULL}		/* extended 10.0 */
+	{ .high = 0x0000, .low = 0x0000000000000000ULL},/* extended 0.0 */
+	{ .high = 0x3fff, .low = 0x8000000000000000ULL},/* extended 1.0 */
+	{ .high = 0x4000, .low = 0x8000000000000000ULL},/* extended 2.0 */
+	{ .high = 0x4000, .low = 0xc000000000000000ULL},/* extended 3.0 */
+	{ .high = 0x4001, .low = 0x8000000000000000ULL},/* extended 4.0 */
+	{ .high = 0x4001, .low = 0xa000000000000000ULL},/* extended 5.0 */
+	{ .high = 0x3ffe, .low = 0x8000000000000000ULL},/* extended 0.5 */
+	{ .high = 0x4002, .low = 0xa000000000000000ULL},/* extended 10.0 */
 };
 #endif
 
diff --git a/arch/arm/nwfpe/fpopcode.h b/arch/arm/nwfpe/fpopcode.h
index 1777e92a88e6..6528e081c83f 100644
--- a/arch/arm/nwfpe/fpopcode.h
+++ b/arch/arm/nwfpe/fpopcode.h
@@ -476,4 +476,10 @@ static inline unsigned int getDestinationSize(const unsigned int opcode)
 	return (nRc);
 }
 
+extern unsigned int checkCondition(const unsigned int opcode,
+				   const unsigned int ccodes);
+
+extern const float64 float64Constant[];
+extern const float32 float32Constant[];
+
 #endif
diff --git a/arch/arm/nwfpe/softfloat-specialize b/arch/arm/nwfpe/softfloat-specialize
index acf409144763..d4a4c8e06635 100644
--- a/arch/arm/nwfpe/softfloat-specialize
+++ b/arch/arm/nwfpe/softfloat-specialize
@@ -332,6 +332,7 @@ static floatx80 commonNaNToFloatx80( commonNaNT a )
 
     z.low = LIT64( 0xC000000000000000 ) | ( a.high>>1 );
     z.high = ( ( (bits16) a.sign )<<15 ) | 0x7FFF;
+    z.__padding = 0;
     return z;
 
 }
diff --git a/arch/arm/nwfpe/softfloat.c b/arch/arm/nwfpe/softfloat.c
index f9f049132a17..0f9656e482ba 100644
--- a/arch/arm/nwfpe/softfloat.c
+++ b/arch/arm/nwfpe/softfloat.c
@@ -531,6 +531,7 @@ INLINE floatx80 packFloatx80( flag zSign, int32 zExp, bits64 zSig )
 
     z.low = zSig;
     z.high = ( ( (bits16) zSign )<<15 ) + zExp;
+    z.__padding = 0;
     return z;
 
 }
@@ -2831,6 +2832,7 @@ static floatx80 subFloatx80Sigs( struct roundingData *roundData, floatx80 a, flo
         roundData->exception |= float_flag_invalid;
         z.low = floatx80_default_nan_low;
         z.high = floatx80_default_nan_high;
+        z.__padding = 0;
         return z;
     }
     if ( aExp == 0 ) {
@@ -2950,6 +2952,7 @@ floatx80 floatx80_mul( struct roundingData *roundData, floatx80 a, floatx80 b )
             roundData->exception |= float_flag_invalid;
             z.low = floatx80_default_nan_low;
             z.high = floatx80_default_nan_high;
+            z.__padding = 0;
             return z;
         }
         return packFloatx80( zSign, 0x7FFF, LIT64( 0x8000000000000000 ) );
@@ -3015,6 +3018,7 @@ floatx80 floatx80_div( struct roundingData *roundData, floatx80 a, floatx80 b )
                 roundData->exception |= float_flag_invalid;
                 z.low = floatx80_default_nan_low;
                 z.high = floatx80_default_nan_high;
+                z.__padding = 0;
                 return z;
             }
             roundData->exception |= float_flag_divbyzero;
@@ -3093,6 +3097,7 @@ floatx80 floatx80_rem( struct roundingData *roundData, floatx80 a, floatx80 b )
             roundData->exception |= float_flag_invalid;
             z.low = floatx80_default_nan_low;
             z.high = floatx80_default_nan_high;
+            z.__padding = 0;
             return z;
         }
         normalizeFloatx80Subnormal( bSig, &bExp, &bSig );
@@ -3184,6 +3189,7 @@ floatx80 floatx80_sqrt( struct roundingData *roundData, floatx80 a )
         roundData->exception |= float_flag_invalid;
         z.low = floatx80_default_nan_low;
         z.high = floatx80_default_nan_high;
+        z.__padding = 0;
         return z;
     }
     if ( aExp == 0 ) {
diff --git a/arch/arm/nwfpe/softfloat.h b/arch/arm/nwfpe/softfloat.h
index 1c8799b9ee4d..978c699673c6 100644
--- a/arch/arm/nwfpe/softfloat.h
+++ b/arch/arm/nwfpe/softfloat.h
@@ -51,11 +51,17 @@ input or output the `floatx80' type will be defined.
 Software IEC/IEEE floating-point types.
 -------------------------------------------------------------------------------
 */
-typedef unsigned long int float32;
-typedef unsigned long long float64;
+typedef u32 float32;
+typedef u64 float64;
 typedef struct {
-    unsigned short high;
-    unsigned long long low;
+#ifdef __ARMEB__
+    u16 __padding;
+    u16 high;
+#else
+    u16 high;
+    u16 __padding;
+#endif
+    u64 low;
 } floatx80;
 
 /*
@@ -265,4 +271,7 @@ static inline flag float64_lt_nocheck(float64 a, float64 b)
 	return (a != b) && (aSign ^ (a < b));
 }
 
+extern flag float32_is_nan( float32 a );
+extern flag float64_is_nan( float64 a );
+
 #endif
diff --git a/arch/arm/oprofile/Makefile b/arch/arm/oprofile/Makefile
index 8ffb523e6c77..6a94e54848fd 100644
--- a/arch/arm/oprofile/Makefile
+++ b/arch/arm/oprofile/Makefile
@@ -6,6 +6,6 @@ DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
 		oprofilefs.o oprofile_stats.o \
 		timer_int.o )
 
-oprofile-y				:= $(DRIVER_OBJS) init.o backtrace.o
-oprofile-$(CONFIG_CPU_XSCALE)		+= common.o op_model_xscale.o
+oprofile-y				:= $(DRIVER_OBJS) common.o backtrace.o
+oprofile-$(CONFIG_CPU_XSCALE)		+= op_model_xscale.o
 
diff --git a/arch/arm/oprofile/backtrace.c b/arch/arm/oprofile/backtrace.c
index df35c452a8bf..7c22c12618cc 100644
--- a/arch/arm/oprofile/backtrace.c
+++ b/arch/arm/oprofile/backtrace.c
@@ -49,42 +49,22 @@ static struct frame_tail* kernel_backtrace(struct frame_tail *tail)
 
 static struct frame_tail* user_backtrace(struct frame_tail *tail)
 {
-	struct frame_tail buftail;
+	struct frame_tail buftail[2];
 
-	/* hardware pte might not be valid due to dirty/accessed bit emulation
-	 * so we use copy_from_user and benefit from exception fixups */
-	if (copy_from_user(&buftail, tail, sizeof(struct frame_tail)))
+	/* Also check accessibility of one struct frame_tail beyond */
+	if (!access_ok(VERIFY_READ, tail, sizeof(buftail)))
+		return NULL;
+	if (__copy_from_user_inatomic(buftail, tail, sizeof(buftail)))
 		return NULL;
 
-	oprofile_add_trace(buftail.lr);
+	oprofile_add_trace(buftail[0].lr);
 
 	/* frame pointers should strictly progress back up the stack
 	 * (towards higher addresses) */
-	if (tail >= buftail.fp)
+	if (tail >= buftail[0].fp)
 		return NULL;
 
-	return buftail.fp-1;
-}
-
-/* Compare two addresses and see if they're on the same page */
-#define CMP_ADDR_EQUAL(x,y,offset) ((((unsigned long) x) >> PAGE_SHIFT) \
-	== ((((unsigned long) y) + offset) >> PAGE_SHIFT))
-
-/* check that the page(s) containing the frame tail are present */
-static int pages_present(struct frame_tail *tail)
-{
-	struct mm_struct * mm = current->mm;
-
-	if (!check_user_page_readable(mm, (unsigned long)tail))
-		return 0;
-
-	if (CMP_ADDR_EQUAL(tail, tail, 8))
-		return 1;
-
-	if (!check_user_page_readable(mm, ((unsigned long)tail) + 8))
-		return 0;
-
-	return 1;
+	return buftail[0].fp-1;
 }
 
 /*
@@ -118,7 +98,6 @@ static int valid_kernel_stack(struct frame_tail *tail, struct pt_regs *regs)
 void arm_backtrace(struct pt_regs * const regs, unsigned int depth)
 {
 	struct frame_tail *tail;
-	unsigned long last_address = 0;
 
 	tail = ((struct frame_tail *) regs->ARM_fp) - 1;
 
@@ -132,13 +111,6 @@ void arm_backtrace(struct pt_regs * const regs, unsigned int depth)
 		return;
 	}
 
-	while (depth-- && tail && !((unsigned long) tail & 3)) {
-		if ((!CMP_ADDR_EQUAL(last_address, tail, 0)
-			|| !CMP_ADDR_EQUAL(last_address, tail, 8))
-				&& !pages_present(tail))
-			return;
-		last_address = (unsigned long) tail;
+	while (depth-- && tail && !((unsigned long) tail & 3))
 		tail = user_backtrace(tail);
-	}
 }
-
diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c
index e57dde882898..1415930ceee1 100644
--- a/arch/arm/oprofile/common.c
+++ b/arch/arm/oprofile/common.c
@@ -10,74 +10,23 @@
 #include <linux/init.h>
 #include <linux/oprofile.h>
 #include <linux/errno.h>
-#include <asm/semaphore.h>
 #include <linux/sysdev.h>
+#include <asm/semaphore.h>
 
 #include "op_counter.h"
 #include "op_arm_model.h"
 
-static struct op_arm_model_spec *pmu_model;
-static int pmu_enabled;
-static struct semaphore pmu_sem;
-
-static int pmu_start(void);
-static int pmu_setup(void);
-static void pmu_stop(void);
-static int pmu_create_files(struct super_block *, struct dentry *);
-
-#ifdef CONFIG_PM
-static int pmu_suspend(struct sys_device *dev, pm_message_t state)
-{
-	if (pmu_enabled)
-		pmu_stop();
-	return 0;
-}
-
-static int pmu_resume(struct sys_device *dev)
-{
-	if (pmu_enabled)
-		pmu_start();
-	return 0;
-}
-
-static struct sysdev_class oprofile_sysclass = {
-	set_kset_name("oprofile"),
-	.resume		= pmu_resume,
-	.suspend	= pmu_suspend,
-};
-
-static struct sys_device device_oprofile = {
-	.id		= 0,
-	.cls		= &oprofile_sysclass,
-};
-
-static int __init init_driverfs(void)
-{
-	int ret;
-
-	if (!(ret = sysdev_class_register(&oprofile_sysclass)))
-		ret = sysdev_register(&device_oprofile);
-
-	return ret;
-}
-
-static void  exit_driverfs(void)
-{
-	sysdev_unregister(&device_oprofile);
-	sysdev_class_unregister(&oprofile_sysclass);
-}
-#else
-#define init_driverfs()	do { } while (0)
-#define exit_driverfs() do { } while (0)
-#endif /* CONFIG_PM */
+static struct op_arm_model_spec *op_arm_model;
+static int op_arm_enabled;
+static struct semaphore op_arm_sem;
 
 struct op_counter_config counter_config[OP_MAX_COUNTER];
 
-static int pmu_create_files(struct super_block *sb, struct dentry *root)
+static int op_arm_create_files(struct super_block *sb, struct dentry *root)
 {
 	unsigned int i;
 
-	for (i = 0; i < pmu_model->num_counters; i++) {
+	for (i = 0; i < op_arm_model->num_counters; i++) {
 		struct dentry *dir;
 		char buf[2];
 
@@ -94,63 +43,123 @@ static int pmu_create_files(struct super_block *sb, struct dentry *root)
 	return 0;
 }
 
-static int pmu_setup(void)
+static int op_arm_setup(void)
 {
 	int ret;
 
 	spin_lock(&oprofilefs_lock);
-	ret = pmu_model->setup_ctrs();
+	ret = op_arm_model->setup_ctrs();
 	spin_unlock(&oprofilefs_lock);
 	return ret;
 }
 
-static int pmu_start(void)
+static int op_arm_start(void)
 {
 	int ret = -EBUSY;
 
-	down(&pmu_sem);
-	if (!pmu_enabled) {
-		ret = pmu_model->start();
-		pmu_enabled = !ret;
+	down(&op_arm_sem);
+	if (!op_arm_enabled) {
+		ret = op_arm_model->start();
+		op_arm_enabled = !ret;
 	}
-	up(&pmu_sem);
+	up(&op_arm_sem);
 	return ret;
 }
 
-static void pmu_stop(void)
+static void op_arm_stop(void)
+{
+	down(&op_arm_sem);
+	if (op_arm_enabled)
+		op_arm_model->stop();
+	op_arm_enabled = 0;
+	up(&op_arm_sem);
+}
+
+#ifdef CONFIG_PM
+static int op_arm_suspend(struct sys_device *dev, pm_message_t state)
 {
-	down(&pmu_sem);
-	if (pmu_enabled)
-		pmu_model->stop();
-	pmu_enabled = 0;
-	up(&pmu_sem);
+	down(&op_arm_sem);
+	if (op_arm_enabled)
+		op_arm_model->stop();
+	up(&op_arm_sem);
+	return 0;
 }
 
-int __init pmu_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec)
+static int op_arm_resume(struct sys_device *dev)
 {
-	init_MUTEX(&pmu_sem);
+	down(&op_arm_sem);
+	if (op_arm_enabled && op_arm_model->start())
+		op_arm_enabled = 0;
+	up(&op_arm_sem);
+	return 0;
+}
+
+static struct sysdev_class oprofile_sysclass = {
+	set_kset_name("oprofile"),
+	.resume		= op_arm_resume,
+	.suspend	= op_arm_suspend,
+};
 
-	if (spec->init() < 0)
-		return -ENODEV;
+static struct sys_device device_oprofile = {
+	.id		= 0,
+	.cls		= &oprofile_sysclass,
+};
 
-	pmu_model = spec;
-	init_driverfs();
-	ops->create_files = pmu_create_files;
-	ops->setup = pmu_setup;
-	ops->shutdown = pmu_stop;
-	ops->start = pmu_start;
-	ops->stop = pmu_stop;
-	ops->cpu_type = pmu_model->name;
-	printk(KERN_INFO "oprofile: using %s PMU\n", spec->name);
+static int __init init_driverfs(void)
+{
+	int ret;
 
-	return 0;
+	if (!(ret = sysdev_class_register(&oprofile_sysclass)))
+		ret = sysdev_register(&device_oprofile);
+
+	return ret;
+}
+
+static void  exit_driverfs(void)
+{
+	sysdev_unregister(&device_oprofile);
+	sysdev_class_unregister(&oprofile_sysclass);
+}
+#else
+#define init_driverfs()	do { } while (0)
+#define exit_driverfs() do { } while (0)
+#endif /* CONFIG_PM */
+
+int __init oprofile_arch_init(struct oprofile_operations *ops)
+{
+	struct op_arm_model_spec *spec = NULL;
+	int ret = -ENODEV;
+
+#ifdef CONFIG_CPU_XSCALE
+	spec = &op_xscale_spec;
+#endif
+
+	if (spec) {
+		init_MUTEX(&op_arm_sem);
+
+		if (spec->init() < 0)
+			return -ENODEV;
+
+		op_arm_model = spec;
+		init_driverfs();
+		ops->create_files = op_arm_create_files;
+		ops->setup = op_arm_setup;
+		ops->shutdown = op_arm_stop;
+		ops->start = op_arm_start;
+		ops->stop = op_arm_stop;
+		ops->cpu_type = op_arm_model->name;
+		ops->backtrace = arm_backtrace;
+		printk(KERN_INFO "oprofile: using %s\n", spec->name);
+	}
+
+	return ret;
 }
 
-void pmu_exit(void)
+void oprofile_arch_exit(void)
 {
-	if (pmu_model) {
+	if (op_arm_model) {
 		exit_driverfs();
-		pmu_model = NULL;
+		op_arm_model = NULL;
 	}
 }
 
diff --git a/arch/arm/oprofile/init.c b/arch/arm/oprofile/init.c
deleted file mode 100644
index d315a3a86c86..000000000000
--- a/arch/arm/oprofile/init.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/**
- * @file init.c
- *
- * @remark Copyright 2004 Oprofile Authors
- * @remark Read the file COPYING
- *
- * @author Zwane Mwaikambo
- */
-
-#include <linux/oprofile.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include "op_arm_model.h"
-
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
-	int ret = -ENODEV;
-
-#ifdef CONFIG_CPU_XSCALE
-	ret = pmu_init(ops, &op_xscale_spec);
-#endif
-
-	ops->backtrace = arm_backtrace;
-
-	return ret;
-}
-
-void oprofile_arch_exit(void)
-{
-#ifdef CONFIG_CPU_XSCALE
-	pmu_exit();
-#endif
-}
diff --git a/arch/arm/oprofile/op_arm_model.h b/arch/arm/oprofile/op_arm_model.h
index 2148d07484b7..38c6ad158547 100644
--- a/arch/arm/oprofile/op_arm_model.h
+++ b/arch/arm/oprofile/op_arm_model.h
@@ -26,6 +26,6 @@ extern struct op_arm_model_spec op_xscale_spec;
 
 extern void arm_backtrace(struct pt_regs * const regs, unsigned int depth);
 
-extern int __init pmu_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec);
-extern void pmu_exit(void);
+extern int __init op_arm_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec);
+extern void op_arm_exit(void);
 #endif /* OP_ARM_MODEL_H */
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 7e144f9cad1c..9ccf1943fc94 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := common.o sram.o sram-fn.o clock.o dma.o mux.o gpio.o mcbsp.o usb.o
+obj-y := common.o sram.o sram-fn.o clock.o devices.o dma.o mux.o gpio.o mcbsp.o usb.o
 obj-m :=
 obj-n :=
 obj-  :=
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 52a58b2da288..7ce39b986e23 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -1,578 +1,42 @@
 /*
  *  linux/arch/arm/plat-omap/clock.c
  *
- *  Copyright (C) 2004 Nokia corporation
+ *  Copyright (C) 2004 - 2005 Nokia corporation
  *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
  *
+ *  Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/config.h>
 #include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
+#include <linux/string.h>
 
 #include <asm/io.h>
 #include <asm/semaphore.h>
 #include <asm/hardware/clock.h>
-#include <asm/arch/board.h>
-#include <asm/arch/usb.h>
 
-#include "clock.h"
-#include "sram.h"
+#include <asm/arch/clock.h>
 
-static LIST_HEAD(clocks);
+LIST_HEAD(clocks);
 static DECLARE_MUTEX(clocks_sem);
-static DEFINE_SPINLOCK(clockfw_lock);
-static void propagate_rate(struct clk *  clk);
-/* UART clock function */
-static int set_uart_rate(struct clk * clk, unsigned long rate);
-/* External clock (MCLK & BCLK) functions */
-static int set_ext_clk_rate(struct clk *  clk, unsigned long rate);
-static long round_ext_clk_rate(struct clk *  clk, unsigned long rate);
-static void init_ext_clk(struct clk *  clk);
-/* MPU virtual clock functions */
-static int select_table_rate(struct clk *  clk, unsigned long rate);
-static long round_to_table_rate(struct clk *  clk, unsigned long rate);
-void clk_setdpll(__u16, __u16);
-
-static struct mpu_rate rate_table[] = {
-	/* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL
-	 * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv
-	 */
-#if defined(CONFIG_OMAP_ARM_216MHZ)
-	{ 216000000, 12000000, 216000000, 0x050d, 0x2910 }, /* 1/1/2/2/2/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_195MHZ)
-	{ 195000000, 13000000, 195000000, 0x050e, 0x2790 }, /* 1/1/2/2/4/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_192MHZ)
-	{ 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */
-	{ 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */
-	{  96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */
-	{  48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/8/4/4/8/8 */
-	{  24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_182MHZ)
-	{ 182000000, 13000000, 182000000, 0x050e, 0x2710 }, /* 1/1/2/2/4/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_168MHZ)
-	{ 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_150MHZ)
-	{ 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */
-#endif
-#if defined(CONFIG_OMAP_ARM_120MHZ)
-	{ 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */
-#endif
-#if defined(CONFIG_OMAP_ARM_96MHZ)
-	{  96000000, 12000000,  96000000, 0x0005, 0x2410 }, /* 1/1/1/1/2/2 */
-#endif
-#if defined(CONFIG_OMAP_ARM_60MHZ)
-	{  60000000, 12000000,  60000000, 0x0005, 0x2290 }, /* 1/1/1/1/2/2 */
-#endif
-#if defined(CONFIG_OMAP_ARM_30MHZ)
-	{  30000000, 12000000,  60000000, 0x0555, 0x2290 }, /* 2/2/2/2/2/2 */
-#endif
-	{ 0, 0, 0, 0, 0 },
-};
-
-
-static void ckctl_recalc(struct clk *  clk);
-int __clk_enable(struct clk *clk);
-void __clk_disable(struct clk *clk);
-void __clk_unuse(struct clk *clk);
-int __clk_use(struct clk *clk);
-
-
-static void followparent_recalc(struct clk *  clk)
-{
-	clk->rate = clk->parent->rate;
-}
-
-
-static void watchdog_recalc(struct clk *  clk)
-{
-	clk->rate = clk->parent->rate / 14;
-}
-
-static void uart_recalc(struct clk * clk)
-{
-	unsigned int val = omap_readl(clk->enable_reg);
-	if (val & clk->enable_bit)
-		clk->rate = 48000000;
-	else
-		clk->rate = 12000000;
-}
-
-static struct clk ck_ref = {
-	.name		= "ck_ref",
-	.rate		= 12000000,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  ALWAYS_ENABLED,
-};
-
-static struct clk ck_dpll1 = {
-	.name		= "ck_dpll1",
-	.parent		= &ck_ref,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  RATE_PROPAGATES | ALWAYS_ENABLED,
-};
-
-static struct clk ck_dpll1out = {
-	.name		= "ck_dpll1out",
-	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP16XX,
-	.enable_reg	= ARM_IDLECT2,
-	.enable_bit	= EN_CKOUT_ARM,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk arm_ck = {
-	.name		= "arm_ck",
-	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  RATE_CKCTL | RATE_PROPAGATES | ALWAYS_ENABLED,
-	.rate_offset	= CKCTL_ARMDIV_OFFSET,
-	.recalc		= &ckctl_recalc,
-};
-
-static struct clk armper_ck = {
-	.name		= "armper_ck",
-	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  RATE_CKCTL,
-	.enable_reg	= ARM_IDLECT2,
-	.enable_bit	= EN_PERCK,
-	.rate_offset	= CKCTL_PERDIV_OFFSET,
-	.recalc		= &ckctl_recalc,
-};
-
-static struct clk arm_gpio_ck = {
-	.name		= "arm_gpio_ck",
-	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP1510,
-	.enable_reg	= ARM_IDLECT2,
-	.enable_bit	= EN_GPIOCK,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk armxor_ck = {
-	.name		= "armxor_ck",
-	.parent		= &ck_ref,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX,
-	.enable_reg	= ARM_IDLECT2,
-	.enable_bit	= EN_XORPCK,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk armtim_ck = {
-	.name		= "armtim_ck",
-	.parent		= &ck_ref,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX,
-	.enable_reg	= ARM_IDLECT2,
-	.enable_bit	= EN_TIMCK,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk armwdt_ck = {
-	.name		= "armwdt_ck",
-	.parent		= &ck_ref,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX,
-	.enable_reg	= ARM_IDLECT2,
-	.enable_bit	= EN_WDTCK,
-	.recalc		= &watchdog_recalc,
-};
-
-static struct clk arminth_ck16xx = {
-	.name		= "arminth_ck",
-	.parent		= &arm_ck,
-	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
-	.recalc		= &followparent_recalc,
-	/* Note: On 16xx the frequency can be divided by 2 by programming
-	 * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1
-	 *
-	 * 1510 version is in TC clocks.
-	 */
-};
-
-static struct clk dsp_ck = {
-	.name		= "dsp_ck",
-	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  RATE_CKCTL,
-	.enable_reg	= ARM_CKCTL,
-	.enable_bit	= EN_DSPCK,
-	.rate_offset	= CKCTL_DSPDIV_OFFSET,
-	.recalc		= &ckctl_recalc,
-};
-
-static struct clk dspmmu_ck = {
-	.name		= "dspmmu_ck",
-	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  RATE_CKCTL | ALWAYS_ENABLED,
-	.rate_offset	= CKCTL_DSPMMUDIV_OFFSET,
-	.recalc		= &ckctl_recalc,
-};
-
-static struct clk dspper_ck = {
-	.name		= "dspper_ck",
-	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  RATE_CKCTL | DSP_DOMAIN_CLOCK | VIRTUAL_IO_ADDRESS,
-	.enable_reg	= DSP_IDLECT2,
-	.enable_bit	= EN_PERCK,
-	.rate_offset	= CKCTL_PERDIV_OFFSET,
-	.recalc		= &followparent_recalc,
-	//.recalc		= &ckctl_recalc,
-};
-
-static struct clk dspxor_ck = {
-	.name		= "dspxor_ck",
-	.parent		= &ck_ref,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  DSP_DOMAIN_CLOCK | VIRTUAL_IO_ADDRESS,
-	.enable_reg	= DSP_IDLECT2,
-	.enable_bit	= EN_XORPCK,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dsptim_ck = {
-	.name		= "dsptim_ck",
-	.parent		= &ck_ref,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  DSP_DOMAIN_CLOCK | VIRTUAL_IO_ADDRESS,
-	.enable_reg	= DSP_IDLECT2,
-	.enable_bit	= EN_DSPTIMCK,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk tc_ck = {
-	.name		= "tc_ck",
-	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP730 |
-			  RATE_CKCTL | RATE_PROPAGATES | ALWAYS_ENABLED,
-	.rate_offset	= CKCTL_TCDIV_OFFSET,
-	.recalc		= &ckctl_recalc,
-};
-
-static struct clk arminth_ck1510 = {
-	.name		= "arminth_ck",
-	.parent		= &tc_ck,
-	.flags		= CLOCK_IN_OMAP1510 | ALWAYS_ENABLED,
-	.recalc		= &followparent_recalc,
-	/* Note: On 1510 the frequency follows TC_CK
-	 *
-	 * 16xx version is in MPU clocks.
-	 */
-};
-
-static struct clk tipb_ck = {
-	.name		= "tibp_ck",
-	.parent		= &tc_ck,
-	.flags		= CLOCK_IN_OMAP1510 | ALWAYS_ENABLED,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk l3_ocpi_ck = {
-	.name		= "l3_ocpi_ck",
-	.parent		= &tc_ck,
-	.flags		= CLOCK_IN_OMAP16XX,
-	.enable_reg	= ARM_IDLECT3,
-	.enable_bit	= EN_OCPI_CK,
-	.recalc		= &followparent_recalc,
-};
+DEFINE_SPINLOCK(clockfw_lock);
 
-static struct clk tc1_ck = {
-	.name		= "tc1_ck",
-	.parent		= &tc_ck,
-	.flags		= CLOCK_IN_OMAP16XX,
-	.enable_reg	= ARM_IDLECT3,
-	.enable_bit	= EN_TC1_CK,
-	.recalc		= &followparent_recalc,
-};
+static struct clk_functions *arch_clock;
 
-static struct clk tc2_ck = {
-	.name		= "tc2_ck",
-	.parent		= &tc_ck,
-	.flags		= CLOCK_IN_OMAP16XX,
-	.enable_reg	= ARM_IDLECT3,
-	.enable_bit	= EN_TC2_CK,
-	.recalc		= &followparent_recalc,
-};
+/*-------------------------------------------------------------------------
+ * Standard clock functions defined in asm/hardware/clock.h
+ *-------------------------------------------------------------------------*/
 
-static struct clk dma_ck = {
-	.name		= "dma_ck",
-	.parent		= &tc_ck,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  ALWAYS_ENABLED,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dma_lcdfree_ck = {
-	.name		= "dma_lcdfree_ck",
-	.parent		= &tc_ck,
-	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk api_ck = {
-	.name		= "api_ck",
-	.parent		= &tc_ck,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX,
-	.enable_reg	= ARM_IDLECT2,
-	.enable_bit	= EN_APICK,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk lb_ck = {
-	.name		= "lb_ck",
-	.parent		= &tc_ck,
-	.flags		= CLOCK_IN_OMAP1510,
-	.enable_reg	= ARM_IDLECT2,
-	.enable_bit	= EN_LBCK,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk rhea1_ck = {
-	.name		= "rhea1_ck",
-	.parent		= &tc_ck,
-	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk rhea2_ck = {
-	.name		= "rhea2_ck",
-	.parent		= &tc_ck,
-	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk lcd_ck = {
-	.name		= "lcd_ck",
-	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP730 |
-			  RATE_CKCTL,
-	.enable_reg	= ARM_IDLECT2,
-	.enable_bit	= EN_LCDCK,
-	.rate_offset	= CKCTL_LCDDIV_OFFSET,
-	.recalc		= &ckctl_recalc,
-};
-
-static struct clk uart1_1510 = {
-	.name		= "uart1_ck",
-	/* Direct from ULPD, no parent */
-	.rate		= 12000000,
-	.flags		= CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT | ALWAYS_ENABLED,
-	.enable_reg	= MOD_CONF_CTRL_0,
-	.enable_bit	= 29,	/* Chooses between 12MHz and 48MHz */
-	.set_rate	= &set_uart_rate,
-	.recalc		= &uart_recalc,
-};
-
-static struct clk uart1_16xx = {
-	.name		= "uart1_ck",
-	/* Direct from ULPD, no parent */
-	.rate		= 48000000,
-	.flags		= CLOCK_IN_OMAP16XX | RATE_FIXED | ENABLE_REG_32BIT,
-	.enable_reg	= MOD_CONF_CTRL_0,
-	.enable_bit	= 29,
-};
-
-static struct clk uart2_ck = {
-	.name		= "uart2_ck",
-	/* Direct from ULPD, no parent */
-	.rate		= 12000000,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | ENABLE_REG_32BIT |
-			  ALWAYS_ENABLED,
-	.enable_reg	= MOD_CONF_CTRL_0,
-	.enable_bit	= 30,	/* Chooses between 12MHz and 48MHz */
-	.set_rate	= &set_uart_rate,
-	.recalc		= &uart_recalc,
-};
-
-static struct clk uart3_1510 = {
-	.name		= "uart3_ck",
-	/* Direct from ULPD, no parent */
-	.rate		= 12000000,
-	.flags		= CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT | ALWAYS_ENABLED,
-	.enable_reg	= MOD_CONF_CTRL_0,
-	.enable_bit	= 31,	/* Chooses between 12MHz and 48MHz */
-	.set_rate	= &set_uart_rate,
-	.recalc		= &uart_recalc,
-};
-
-static struct clk uart3_16xx = {
-	.name		= "uart3_ck",
-	/* Direct from ULPD, no parent */
-	.rate		= 48000000,
-	.flags		= CLOCK_IN_OMAP16XX | RATE_FIXED | ENABLE_REG_32BIT,
-	.enable_reg	= MOD_CONF_CTRL_0,
-	.enable_bit	= 31,
-};
-
-static struct clk usb_clko = {	/* 6 MHz output on W4_USB_CLKO */
-	.name		= "usb_clko",
-	/* Direct from ULPD, no parent */
-	.rate		= 6000000,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  RATE_FIXED | ENABLE_REG_32BIT,
-	.enable_reg	= ULPD_CLOCK_CTRL,
-	.enable_bit	= USB_MCLK_EN_BIT,
-};
-
-static struct clk usb_hhc_ck1510 = {
-	.name		= "usb_hhc_ck",
-	/* Direct from ULPD, no parent */
-	.rate		= 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
-	.flags		= CLOCK_IN_OMAP1510 |
-			  RATE_FIXED | ENABLE_REG_32BIT,
-	.enable_reg	= MOD_CONF_CTRL_0,
-	.enable_bit	= USB_HOST_HHC_UHOST_EN,
-};
-
-static struct clk usb_hhc_ck16xx = {
-	.name		= "usb_hhc_ck",
-	/* Direct from ULPD, no parent */
-	.rate		= 48000000,
-	/* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
-	.flags		= CLOCK_IN_OMAP16XX |
-			  RATE_FIXED | ENABLE_REG_32BIT,
-	.enable_reg	= OTG_BASE + 0x08 /* OTG_SYSCON_2 */,
-	.enable_bit	= 8 /* UHOST_EN */,
-};
-
-static struct clk usb_dc_ck = {
-	.name		= "usb_dc_ck",
-	/* Direct from ULPD, no parent */
-	.rate		= 48000000,
-	.flags		= CLOCK_IN_OMAP16XX | RATE_FIXED,
-	.enable_reg	= SOFT_REQ_REG,
-	.enable_bit	= 4,
-};
-
-static struct clk mclk_1510 = {
-	.name		= "mclk",
-	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
-	.rate		= 12000000,
-	.flags		= CLOCK_IN_OMAP1510 | RATE_FIXED,
-};
-
-static struct clk mclk_16xx = {
-	.name		= "mclk",
-	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
-	.flags		= CLOCK_IN_OMAP16XX,
-	.enable_reg	= COM_CLK_DIV_CTRL_SEL,
-	.enable_bit	= COM_ULPD_PLL_CLK_REQ,
-	.set_rate	= &set_ext_clk_rate,
-	.round_rate	= &round_ext_clk_rate,
-	.init		= &init_ext_clk,
-};
-
-static struct clk bclk_1510 = {
-	.name		= "bclk",
-	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
-	.rate		= 12000000,
-	.flags		= CLOCK_IN_OMAP1510 | RATE_FIXED,
-};
-
-static struct clk bclk_16xx = {
-	.name		= "bclk",
-	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
-	.flags		= CLOCK_IN_OMAP16XX,
-	.enable_reg	= SWD_CLK_DIV_CTRL_SEL,
-	.enable_bit	= SWD_ULPD_PLL_CLK_REQ,
-	.set_rate	= &set_ext_clk_rate,
-	.round_rate	= &round_ext_clk_rate,
-	.init		= &init_ext_clk,
-};
-
-static struct clk mmc1_ck = {
-	.name		= "mmc1_ck",
-	/* Functional clock is direct from ULPD, interface clock is ARMPER */
-	.parent		= &armper_ck,
-	.rate		= 48000000,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  RATE_FIXED | ENABLE_REG_32BIT,
-	.enable_reg	= MOD_CONF_CTRL_0,
-	.enable_bit	= 23,
-};
-
-static struct clk mmc2_ck = {
-	.name		= "mmc2_ck",
-	/* Functional clock is direct from ULPD, interface clock is ARMPER */
-	.parent		= &armper_ck,
-	.rate		= 48000000,
-	.flags		= CLOCK_IN_OMAP16XX |
-			  RATE_FIXED | ENABLE_REG_32BIT,
-	.enable_reg	= MOD_CONF_CTRL_0,
-	.enable_bit	= 20,
-};
-
-static struct clk virtual_ck_mpu = {
-	.name		= "mpu",
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  VIRTUAL_CLOCK | ALWAYS_ENABLED,
-	.parent		= &arm_ck, /* Is smarter alias for */
-	.recalc		= &followparent_recalc,
-	.set_rate	= &select_table_rate,
-	.round_rate	= &round_to_table_rate,
-};
-
-
-static struct clk *  onchip_clks[] = {
-	/* non-ULPD clocks */
-	&ck_ref,
-	&ck_dpll1,
-	/* CK_GEN1 clocks */
-	&ck_dpll1out,
-	&arm_ck,
-	&armper_ck,
-	&arm_gpio_ck,
-	&armxor_ck,
-	&armtim_ck,
-	&armwdt_ck,
-	&arminth_ck1510,  &arminth_ck16xx,
-	/* CK_GEN2 clocks */
-	&dsp_ck,
-	&dspmmu_ck,
-	&dspper_ck,
-	&dspxor_ck,
-	&dsptim_ck,
-	/* CK_GEN3 clocks */
-	&tc_ck,
-	&tipb_ck,
-	&l3_ocpi_ck,
-	&tc1_ck,
-	&tc2_ck,
-	&dma_ck,
-	&dma_lcdfree_ck,
-	&api_ck,
-	&lb_ck,
-	&rhea1_ck,
-	&rhea2_ck,
-	&lcd_ck,
-	/* ULPD clocks */
-	&uart1_1510,
-	&uart1_16xx,
-	&uart2_ck,
-	&uart3_1510,
-	&uart3_16xx,
-	&usb_clko,
-	&usb_hhc_ck1510, &usb_hhc_ck16xx,
-	&usb_dc_ck,
-	&mclk_1510,  &mclk_16xx,
-	&bclk_1510,  &bclk_16xx,
-	&mmc1_ck,
-	&mmc2_ck,
-	/* Virtual clocks */
-	&virtual_ck_mpu,
-};
-
-struct clk *clk_get(struct device *dev, const char *id)
+struct clk * clk_get(struct device *dev, const char *id)
 {
 	struct clk *p, *clk = ERR_PTR(-ENOENT);
 
@@ -589,534 +53,200 @@ struct clk *clk_get(struct device *dev, const char *id)
 }
 EXPORT_SYMBOL(clk_get);
 
-
-void clk_put(struct clk *clk)
-{
-	if (clk && !IS_ERR(clk))
-		module_put(clk->owner);
-}
-EXPORT_SYMBOL(clk_put);
-
-
-int __clk_enable(struct clk *clk)
-{
-	__u16 regval16;
-	__u32 regval32;
-
-	if (clk->flags & ALWAYS_ENABLED)
-		return 0;
-
-	if (unlikely(clk->enable_reg == 0)) {
-		printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
-		       clk->name);
-		return 0;
-	}
-
-	if (clk->flags & DSP_DOMAIN_CLOCK) {
-		__clk_use(&api_ck);
-	}
-
-	if (clk->flags & ENABLE_REG_32BIT) {
-		if (clk->flags & VIRTUAL_IO_ADDRESS) {
-			regval32 = __raw_readl(clk->enable_reg);
-			regval32 |= (1 << clk->enable_bit);
-			__raw_writel(regval32, clk->enable_reg);
-		} else {
-			regval32 = omap_readl(clk->enable_reg);
-			regval32 |= (1 << clk->enable_bit);
-			omap_writel(regval32, clk->enable_reg);
-		}
-	} else {
-		if (clk->flags & VIRTUAL_IO_ADDRESS) {
-			regval16 = __raw_readw(clk->enable_reg);
-			regval16 |= (1 << clk->enable_bit);
-			__raw_writew(regval16, clk->enable_reg);
-		} else {
-			regval16 = omap_readw(clk->enable_reg);
-			regval16 |= (1 << clk->enable_bit);
-			omap_writew(regval16, clk->enable_reg);
-		}
-	}
-
-	if (clk->flags & DSP_DOMAIN_CLOCK) {
-		__clk_unuse(&api_ck);
-	}
-
-	return 0;
-}
-
-
-void __clk_disable(struct clk *clk)
-{
-	__u16 regval16;
-	__u32 regval32;
-
-	if (clk->enable_reg == 0)
-		return;
-
-	if (clk->flags & DSP_DOMAIN_CLOCK) {
-		__clk_use(&api_ck);
-	}
-
-	if (clk->flags & ENABLE_REG_32BIT) {
-		if (clk->flags & VIRTUAL_IO_ADDRESS) {
-			regval32 = __raw_readl(clk->enable_reg);
-			regval32 &= ~(1 << clk->enable_bit);
-			__raw_writel(regval32, clk->enable_reg);
-		} else {
-			regval32 = omap_readl(clk->enable_reg);
-			regval32 &= ~(1 << clk->enable_bit);
-			omap_writel(regval32, clk->enable_reg);
-		}
-	} else {
-		if (clk->flags & VIRTUAL_IO_ADDRESS) {
-			regval16 = __raw_readw(clk->enable_reg);
-			regval16 &= ~(1 << clk->enable_bit);
-			__raw_writew(regval16, clk->enable_reg);
-		} else {
-			regval16 = omap_readw(clk->enable_reg);
-			regval16 &= ~(1 << clk->enable_bit);
-			omap_writew(regval16, clk->enable_reg);
-		}
-	}
-
-	if (clk->flags & DSP_DOMAIN_CLOCK) {
-		__clk_unuse(&api_ck);
-	}
-}
-
-
-void __clk_unuse(struct clk *clk)
-{
-	if (clk->usecount > 0 && !(--clk->usecount)) {
-		__clk_disable(clk);
-		if (likely(clk->parent))
-			__clk_unuse(clk->parent);
-	}
-}
-
-
-int __clk_use(struct clk *clk)
-{
-	int ret = 0;
-	if (clk->usecount++ == 0) {
-		if (likely(clk->parent))
-			ret = __clk_use(clk->parent);
-
-		if (unlikely(ret != 0)) {
-			clk->usecount--;
-			return ret;
-		}
-
-		ret = __clk_enable(clk);
-
-		if (unlikely(ret != 0) && clk->parent) {
-			__clk_unuse(clk->parent);
-			clk->usecount--;
-		}
-	}
-
-	return ret;
-}
-
-
 int clk_enable(struct clk *clk)
 {
 	unsigned long flags;
-	int ret;
+	int ret = 0;
 
 	spin_lock_irqsave(&clockfw_lock, flags);
-	ret = __clk_enable(clk);
+	if (clk->enable)
+		ret = clk->enable(clk);
+	else if (arch_clock->clk_enable)
+		ret = arch_clock->clk_enable(clk);
+	else
+		printk(KERN_ERR "Could not enable clock %s\n", clk->name);
 	spin_unlock_irqrestore(&clockfw_lock, flags);
+
 	return ret;
 }
 EXPORT_SYMBOL(clk_enable);
 
-
 void clk_disable(struct clk *clk)
 {
 	unsigned long flags;
 
 	spin_lock_irqsave(&clockfw_lock, flags);
-	__clk_disable(clk);
+	if (clk->disable)
+		clk->disable(clk);
+	else if (arch_clock->clk_disable)
+		arch_clock->clk_disable(clk);
+	else
+		printk(KERN_ERR "Could not disable clock %s\n", clk->name);
 	spin_unlock_irqrestore(&clockfw_lock, flags);
 }
 EXPORT_SYMBOL(clk_disable);
 
-
 int clk_use(struct clk *clk)
 {
 	unsigned long flags;
 	int ret = 0;
 
 	spin_lock_irqsave(&clockfw_lock, flags);
-	ret = __clk_use(clk);
+	if (arch_clock->clk_use)
+		ret = arch_clock->clk_use(clk);
 	spin_unlock_irqrestore(&clockfw_lock, flags);
+
 	return ret;
 }
 EXPORT_SYMBOL(clk_use);
 
-
 void clk_unuse(struct clk *clk)
 {
 	unsigned long flags;
 
 	spin_lock_irqsave(&clockfw_lock, flags);
-	__clk_unuse(clk);
+	if (arch_clock->clk_unuse)
+		arch_clock->clk_unuse(clk);
 	spin_unlock_irqrestore(&clockfw_lock, flags);
 }
 EXPORT_SYMBOL(clk_unuse);
 
-
 int clk_get_usecount(struct clk *clk)
 {
-        return clk->usecount;
-}
-EXPORT_SYMBOL(clk_get_usecount);
-
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-
-static __u16 verify_ckctl_value(__u16 newval)
-{
-	/* This function checks for following limitations set
-	 * by the hardware (all conditions must be true):
-	 * DSPMMU_CK == DSP_CK  or  DSPMMU_CK == DSP_CK/2
-	 * ARM_CK >= TC_CK
-	 * DSP_CK >= TC_CK
-	 * DSPMMU_CK >= TC_CK
-	 *
-	 * In addition following rules are enforced:
-	 * LCD_CK <= TC_CK
-	 * ARMPER_CK <= TC_CK
-	 *
-	 * However, maximum frequencies are not checked for!
-	 */
-	__u8 per_exp;
-	__u8 lcd_exp;
-	__u8 arm_exp;
-	__u8 dsp_exp;
-	__u8 tc_exp;
-	__u8 dspmmu_exp;
-
-	per_exp = (newval >> CKCTL_PERDIV_OFFSET) & 3;
-	lcd_exp = (newval >> CKCTL_LCDDIV_OFFSET) & 3;
-	arm_exp = (newval >> CKCTL_ARMDIV_OFFSET) & 3;
-	dsp_exp = (newval >> CKCTL_DSPDIV_OFFSET) & 3;
-	tc_exp = (newval >> CKCTL_TCDIV_OFFSET) & 3;
-	dspmmu_exp = (newval >> CKCTL_DSPMMUDIV_OFFSET) & 3;
-
-	if (dspmmu_exp < dsp_exp)
-		dspmmu_exp = dsp_exp;
-	if (dspmmu_exp > dsp_exp+1)
-		dspmmu_exp = dsp_exp+1;
-	if (tc_exp < arm_exp)
-		tc_exp = arm_exp;
-	if (tc_exp < dspmmu_exp)
-		tc_exp = dspmmu_exp;
-	if (tc_exp > lcd_exp)
-		lcd_exp = tc_exp;
-	if (tc_exp > per_exp)
-		per_exp = tc_exp;
+	unsigned long flags;
+	int ret = 0;
 
-	newval &= 0xf000;
-	newval |= per_exp << CKCTL_PERDIV_OFFSET;
-	newval |= lcd_exp << CKCTL_LCDDIV_OFFSET;
-	newval |= arm_exp << CKCTL_ARMDIV_OFFSET;
-	newval |= dsp_exp << CKCTL_DSPDIV_OFFSET;
-	newval |= tc_exp << CKCTL_TCDIV_OFFSET;
-	newval |= dspmmu_exp << CKCTL_DSPMMUDIV_OFFSET;
+	spin_lock_irqsave(&clockfw_lock, flags);
+	ret = clk->usecount;
+	spin_unlock_irqrestore(&clockfw_lock, flags);
 
-	return newval;
+	return ret;
 }
+EXPORT_SYMBOL(clk_get_usecount);
 
-
-static int calc_dsor_exp(struct clk *clk, unsigned long rate)
+unsigned long clk_get_rate(struct clk *clk)
 {
-	/* Note: If target frequency is too low, this function will return 4,
-	 * which is invalid value. Caller must check for this value and act
-	 * accordingly.
-	 *
-	 * Note: This function does not check for following limitations set
-	 * by the hardware (all conditions must be true):
-	 * DSPMMU_CK == DSP_CK  or  DSPMMU_CK == DSP_CK/2
-	 * ARM_CK >= TC_CK
-	 * DSP_CK >= TC_CK
-	 * DSPMMU_CK >= TC_CK
-	 */
-	unsigned long realrate;
-	struct clk *  parent;
-	unsigned  dsor_exp;
-
-	if (unlikely(!(clk->flags & RATE_CKCTL)))
-		return -EINVAL;
-
-	parent = clk->parent;
-	if (unlikely(parent == 0))
-		return -EIO;
-
-	realrate = parent->rate;
-	for (dsor_exp=0; dsor_exp<4; dsor_exp++) {
-		if (realrate <= rate)
-			break;
+	unsigned long flags;
+	unsigned long ret = 0;
 
-		realrate /= 2;
-	}
+	spin_lock_irqsave(&clockfw_lock, flags);
+	ret = clk->rate;
+	spin_unlock_irqrestore(&clockfw_lock, flags);
 
-	return dsor_exp;
+	return ret;
 }
+EXPORT_SYMBOL(clk_get_rate);
 
-
-static void ckctl_recalc(struct clk *  clk)
+void clk_put(struct clk *clk)
 {
-	int dsor;
-
-	/* Calculate divisor encoded as 2-bit exponent */
-	if (clk->flags & DSP_DOMAIN_CLOCK) {
-		/* The clock control bits are in DSP domain,
-		 * so api_ck is needed for access.
-		 * Note that DSP_CKCTL virt addr = phys addr, so
-		 * we must use __raw_readw() instead of omap_readw().
-		 */
-		__clk_use(&api_ck);
-		dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset));
-		__clk_unuse(&api_ck);
-	} else {
-		dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset));
-	}
-	if (unlikely(clk->rate == clk->parent->rate / dsor))
-		return; /* No change, quick exit */
-	clk->rate = clk->parent->rate / dsor;
-
-	if (unlikely(clk->flags & RATE_PROPAGATES))
-		propagate_rate(clk);
+	if (clk && !IS_ERR(clk))
+		module_put(clk->owner);
 }
+EXPORT_SYMBOL(clk_put);
 
+/*-------------------------------------------------------------------------
+ * Optional clock functions defined in asm/hardware/clock.h
+ *-------------------------------------------------------------------------*/
 
 long clk_round_rate(struct clk *clk, unsigned long rate)
 {
-	int dsor_exp;
-
-	if (clk->flags & RATE_FIXED)
-		return clk->rate;
-
-	if (clk->flags & RATE_CKCTL) {
-		dsor_exp = calc_dsor_exp(clk, rate);
-		if (dsor_exp < 0)
-			return dsor_exp;
-		if (dsor_exp > 3)
-			dsor_exp = 3;
-		return clk->parent->rate / (1 << dsor_exp);
-	}
+	unsigned long flags;
+	long ret = 0;
 
-	if(clk->round_rate != 0)
-		return clk->round_rate(clk, rate);
+	spin_lock_irqsave(&clockfw_lock, flags);
+	if (arch_clock->clk_round_rate)
+		ret = arch_clock->clk_round_rate(clk, rate);
+	spin_unlock_irqrestore(&clockfw_lock, flags);
 
-	return clk->rate;
+	return ret;
 }
 EXPORT_SYMBOL(clk_round_rate);
 
-
-static void propagate_rate(struct clk *  clk)
-{
-	struct clk **  clkp;
-
-	for (clkp = onchip_clks; clkp < onchip_clks+ARRAY_SIZE(onchip_clks); clkp++) {
-		if (likely((*clkp)->parent != clk)) continue;
-		if (likely((*clkp)->recalc))
-			(*clkp)->recalc(*clkp);
-	}
-}
-
-
-static int select_table_rate(struct clk *  clk, unsigned long rate)
+int clk_set_rate(struct clk *clk, unsigned long rate)
 {
-	/* Find the highest supported frequency <= rate and switch to it */
-	struct mpu_rate *  ptr;
-
-	if (clk != &virtual_ck_mpu)
-		return -EINVAL;
-
-	for (ptr = rate_table; ptr->rate; ptr++) {
-		if (ptr->xtal != ck_ref.rate)
-			continue;
-
-		/* DPLL1 cannot be reprogrammed without risking system crash */
-		if (likely(ck_dpll1.rate!=0) && ptr->pll_rate != ck_dpll1.rate)
-			continue;
-
-		/* Can check only after xtal frequency check */
-		if (ptr->rate <= rate)
-			break;
-	}
-
-	if (!ptr->rate)
-		return -EINVAL;
+	unsigned long flags;
+	int ret = 0;
 
-	/*
-	 * In most cases we should not need to reprogram DPLL.
-	 * Reprogramming the DPLL is tricky, it must be done from SRAM.
-	 */
-	omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
+	spin_lock_irqsave(&clockfw_lock, flags);
+	if (arch_clock->clk_set_rate)
+		ret = arch_clock->clk_set_rate(clk, rate);
+	spin_unlock_irqrestore(&clockfw_lock, flags);
 
-	ck_dpll1.rate = ptr->pll_rate;
-	propagate_rate(&ck_dpll1);
-	return 0;
+	return ret;
 }
+EXPORT_SYMBOL(clk_set_rate);
 
-
-static long round_to_table_rate(struct clk *  clk, unsigned long rate)
+int clk_set_parent(struct clk *clk, struct clk *parent)
 {
-	/* Find the highest supported frequency <= rate */
-	struct mpu_rate *  ptr;
-	long  highest_rate;
-
-	if (clk != &virtual_ck_mpu)
-		return -EINVAL;
-
-	highest_rate = -EINVAL;
-
-	for (ptr = rate_table; ptr->rate; ptr++) {
-		if (ptr->xtal != ck_ref.rate)
-			continue;
-
-		highest_rate = ptr->rate;
+	unsigned long flags;
+	int ret = 0;
 
-		/* Can check only after xtal frequency check */
-		if (ptr->rate <= rate)
-			break;
-	}
+	spin_lock_irqsave(&clockfw_lock, flags);
+	if (arch_clock->clk_set_parent)
+		ret =  arch_clock->clk_set_parent(clk, parent);
+	spin_unlock_irqrestore(&clockfw_lock, flags);
 
-	return highest_rate;
+	return ret;
 }
+EXPORT_SYMBOL(clk_set_parent);
 
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
+struct clk *clk_get_parent(struct clk *clk)
 {
-	int  ret = -EINVAL;
-	int  dsor_exp;
-	__u16  regval;
-	unsigned long  flags;
-
-	if (clk->flags & RATE_CKCTL) {
-		dsor_exp = calc_dsor_exp(clk, rate);
-		if (dsor_exp > 3)
-			dsor_exp = -EINVAL;
-		if (dsor_exp < 0)
-			return dsor_exp;
-
-		spin_lock_irqsave(&clockfw_lock, flags);
-		regval = omap_readw(ARM_CKCTL);
-		regval &= ~(3 << clk->rate_offset);
-		regval |= dsor_exp << clk->rate_offset;
-		regval = verify_ckctl_value(regval);
-		omap_writew(regval, ARM_CKCTL);
-		clk->rate = clk->parent->rate / (1 << dsor_exp);
-		spin_unlock_irqrestore(&clockfw_lock, flags);
-		ret = 0;
-	} else if(clk->set_rate != 0) {
-		spin_lock_irqsave(&clockfw_lock, flags);
-		ret = clk->set_rate(clk, rate);
-		spin_unlock_irqrestore(&clockfw_lock, flags);
-	}
+	unsigned long flags;
+	struct clk * ret = NULL;
 
-	if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES)))
-		propagate_rate(clk);
+	spin_lock_irqsave(&clockfw_lock, flags);
+	if (arch_clock->clk_get_parent)
+		ret = arch_clock->clk_get_parent(clk);
+	spin_unlock_irqrestore(&clockfw_lock, flags);
 
 	return ret;
 }
-EXPORT_SYMBOL(clk_set_rate);
+EXPORT_SYMBOL(clk_get_parent);
 
+/*-------------------------------------------------------------------------
+ * OMAP specific clock functions shared between omap1 and omap2
+ *-------------------------------------------------------------------------*/
 
-static unsigned calc_ext_dsor(unsigned long rate)
-{
-	unsigned dsor;
+unsigned int __initdata mpurate;
 
-	/* MCLK and BCLK divisor selection is not linear:
-	 * freq = 96MHz / dsor
-	 *
-	 * RATIO_SEL range: dsor <-> RATIO_SEL
-	 * 0..6: (RATIO_SEL+2) <-> (dsor-2)
-	 * 6..48:  (8+(RATIO_SEL-6)*2) <-> ((dsor-8)/2+6)
-	 * Minimum dsor is 2 and maximum is 96. Odd divisors starting from 9
-	 * can not be used.
-	 */
-	for (dsor = 2; dsor < 96; ++dsor) {
-		if ((dsor & 1) && dsor > 8)
-		  	continue;
-		if (rate >= 96000000 / dsor)
-			break;
-	}
-	return dsor;
-}
-
-/* Only needed on 1510 */
-static int set_uart_rate(struct clk * clk, unsigned long rate)
-{
-	unsigned int val;
-
-	val = omap_readl(clk->enable_reg);
-	if (rate == 12000000)
-		val &= ~(1 << clk->enable_bit);
-	else if (rate == 48000000)
-		val |= (1 << clk->enable_bit);
-	else
-		return -EINVAL;
-	omap_writel(val, clk->enable_reg);
-	clk->rate = rate;
-
-	return 0;
-}
-
-static int set_ext_clk_rate(struct clk *  clk, unsigned long rate)
+/*
+ * By default we use the rate set by the bootloader.
+ * You can override this with mpurate= cmdline option.
+ */
+static int __init omap_clk_setup(char *str)
 {
-	unsigned dsor;
-	__u16 ratio_bits;
+	get_option(&str, &mpurate);
 
-	dsor = calc_ext_dsor(rate);
-	clk->rate = 96000000 / dsor;
-	if (dsor > 8)
-		ratio_bits = ((dsor - 8) / 2 + 6) << 2;
-	else
-		ratio_bits = (dsor - 2) << 2;
+	if (!mpurate)
+		return 1;
 
-	ratio_bits |= omap_readw(clk->enable_reg) & ~0xfd;
-	omap_writew(ratio_bits, clk->enable_reg);
+	if (mpurate < 1000)
+		mpurate *= 1000000;
 
-	return 0;
+	return 1;
 }
+__setup("mpurate=", omap_clk_setup);
 
-
-static long round_ext_clk_rate(struct clk *  clk, unsigned long rate)
+/* Used for clocks that always have same value as the parent clock */
+void followparent_recalc(struct clk *clk)
 {
-	return 96000000 / calc_ext_dsor(rate);
+	clk->rate = clk->parent->rate;
 }
 
-
-static void init_ext_clk(struct clk *  clk)
+/* Propagate rate to children */
+void propagate_rate(struct clk * tclk)
 {
-	unsigned dsor;
-	__u16 ratio_bits;
+	struct clk *clkp;
 
-	/* Determine current rate and ensure clock is based on 96MHz APLL */
-	ratio_bits = omap_readw(clk->enable_reg) & ~1;
-	omap_writew(ratio_bits, clk->enable_reg);
-
-	ratio_bits = (ratio_bits & 0xfc) >> 2;
-	if (ratio_bits > 6)
-		dsor = (ratio_bits - 6) * 2 + 8;
-	else
-		dsor = ratio_bits + 2;
-
-	clk-> rate = 96000000 / dsor;
+	list_for_each_entry(clkp, &clocks, node) {
+		if (likely(clkp->parent != tclk))
+			continue;
+		if (likely((u32)clkp->recalc))
+			clkp->recalc(clkp);
+	}
 }
 
-
 int clk_register(struct clk *clk)
 {
 	down(&clocks_sem);
@@ -1124,6 +254,7 @@ int clk_register(struct clk *clk)
 	if (clk->init)
 		clk->init(clk);
 	up(&clocks_sem);
+
 	return 0;
 }
 EXPORT_SYMBOL(clk_register);
@@ -1136,203 +267,38 @@ void clk_unregister(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_unregister);
 
-#ifdef CONFIG_OMAP_RESET_CLOCKS
-/*
- * Resets some clocks that may be left on from bootloader,
- * but leaves serial clocks on. See also omap_late_clk_reset().
- */
-static inline void omap_early_clk_reset(void)
+void clk_deny_idle(struct clk *clk)
 {
-	//omap_writel(0x3 << 29, MOD_CONF_CTRL_0);
+	unsigned long flags;
+
+	spin_lock_irqsave(&clockfw_lock, flags);
+	if (arch_clock->clk_deny_idle)
+		arch_clock->clk_deny_idle(clk);
+	spin_unlock_irqrestore(&clockfw_lock, flags);
 }
-#else
-#define omap_early_clk_reset()	{}
-#endif
+EXPORT_SYMBOL(clk_deny_idle);
 
-int __init clk_init(void)
+void clk_allow_idle(struct clk *clk)
 {
-	struct clk **  clkp;
-	const struct omap_clock_config *info;
-	int crystal_type = 0; /* Default 12 MHz */
-
-	omap_early_clk_reset();
-
-	for (clkp = onchip_clks; clkp < onchip_clks+ARRAY_SIZE(onchip_clks); clkp++) {
-		if (((*clkp)->flags &CLOCK_IN_OMAP1510) && cpu_is_omap1510()) {
-			clk_register(*clkp);
-			continue;
-		}
-
-		if (((*clkp)->flags &CLOCK_IN_OMAP16XX) && cpu_is_omap16xx()) {
-			clk_register(*clkp);
-			continue;
-		}
-
-		if (((*clkp)->flags &CLOCK_IN_OMAP730) && cpu_is_omap730()) {
-			clk_register(*clkp);
-			continue;
-		}
-	}
-
-	info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config);
-	if (info != NULL) {
-		if (!cpu_is_omap1510())
-			crystal_type = info->system_clock_type;
-	}
-
-#if defined(CONFIG_ARCH_OMAP730)
-	ck_ref.rate = 13000000;
-#elif defined(CONFIG_ARCH_OMAP16XX)
-	if (crystal_type == 2)
-		ck_ref.rate = 19200000;
-#endif
-
-	printk("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n",
-	       omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
-	       omap_readw(ARM_CKCTL));
-
-	/* We want to be in syncronous scalable mode */
-	omap_writew(0x1000, ARM_SYSST);
-
-#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER
-	/* Use values set by bootloader. Determine PLL rate and recalculate
-	 * dependent clocks as if kernel had changed PLL or divisors.
-	 */
-	{
-		unsigned pll_ctl_val = omap_readw(DPLL_CTL);
-
-		ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */
-		if (pll_ctl_val & 0x10) {
-			/* PLL enabled, apply multiplier and divisor */
-			if (pll_ctl_val & 0xf80)
-				ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7;
-			ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1;
-		} else {
-			/* PLL disabled, apply bypass divisor */
-			switch (pll_ctl_val & 0xc) {
-			case 0:
-				break;
-			case 0x4:
-				ck_dpll1.rate /= 2;
-				break;
-			default:
-				ck_dpll1.rate /= 4;
-				break;
-			}
-		}
-	}
-	propagate_rate(&ck_dpll1);
-#else
-	/* Find the highest supported frequency and enable it */
-	if (select_table_rate(&virtual_ck_mpu, ~0)) {
-		printk(KERN_ERR "System frequencies not set. Check your config.\n");
-		/* Guess sane values (60MHz) */
-		omap_writew(0x2290, DPLL_CTL);
-		omap_writew(0x1005, ARM_CKCTL);
-		ck_dpll1.rate = 60000000;
-		propagate_rate(&ck_dpll1);
-	}
-#endif
-	/* Cache rates for clocks connected to ck_ref (not dpll1) */
-	propagate_rate(&ck_ref);
-	printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): "
-		"%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
-	       ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
-	       ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
-	       arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
-
-#ifdef CONFIG_MACH_OMAP_PERSEUS2
-	/* Select slicer output as OMAP input clock */
-	omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL);
-#endif
-
-	/* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
-	omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
-
-	/* Put DSP/MPUI into reset until needed */
-	omap_writew(0, ARM_RSTCT1);
-	omap_writew(1, ARM_RSTCT2);
-	omap_writew(0x400, ARM_IDLECT1);
-
-	/*
-	 * According to OMAP5910 Erratum SYS_DMA_1, bit DMACK_REQ (bit 8)
-	 * of the ARM_IDLECT2 register must be set to zero. The power-on
-	 * default value of this bit is one.
-	 */
-	omap_writew(0x0000, ARM_IDLECT2);	/* Turn LCD clock off also */
-
-	/*
-	 * Only enable those clocks we will need, let the drivers
-	 * enable other clocks as necessary
-	 */
-	clk_use(&armper_ck);
-	clk_use(&armxor_ck);
-	clk_use(&armtim_ck);
-
-	if (cpu_is_omap1510())
-		clk_enable(&arm_gpio_ck);
+	unsigned long flags;
 
-	return 0;
+	spin_lock_irqsave(&clockfw_lock, flags);
+	if (arch_clock->clk_allow_idle)
+		arch_clock->clk_allow_idle(clk);
+	spin_unlock_irqrestore(&clockfw_lock, flags);
 }
+EXPORT_SYMBOL(clk_allow_idle);
 
+/*-------------------------------------------------------------------------*/
 
-#ifdef CONFIG_OMAP_RESET_CLOCKS
-
-static int __init omap_late_clk_reset(void)
+int __init clk_init(struct clk_functions * custom_clocks)
 {
-	/* Turn off all unused clocks */
-	struct clk *p;
-	__u32 regval32;
-
-	/* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
-	regval32 = omap_readw(SOFT_REQ_REG) & (1 << 4);
-	omap_writew(regval32, SOFT_REQ_REG);
-	omap_writew(0, SOFT_REQ_REG2);
-
-	list_for_each_entry(p, &clocks, node) {
-		if (p->usecount > 0 || (p->flags & ALWAYS_ENABLED) ||
-			p->enable_reg == 0)
-			continue;
-
-		/* Assume no DSP clocks have been activated by bootloader */
-		if (p->flags & DSP_DOMAIN_CLOCK)
-			continue;
-
-		/* Is the clock already disabled? */
-		if (p->flags & ENABLE_REG_32BIT) {
-			if (p->flags & VIRTUAL_IO_ADDRESS)
-				regval32 = __raw_readl(p->enable_reg);
-			else
-				regval32 = omap_readl(p->enable_reg);
-		} else {
-			if (p->flags & VIRTUAL_IO_ADDRESS)
-				regval32 = __raw_readw(p->enable_reg);
-			else
-				regval32 = omap_readw(p->enable_reg);
-		}
-
-		if ((regval32 & (1 << p->enable_bit)) == 0)
-			continue;
-
-		/* FIXME: This clock seems to be necessary but no-one
-		 * has asked for its activation. */
-		if (p == &tc2_ck         // FIX: pm.c (SRAM), CCP, Camera
-		    || p == &ck_dpll1out // FIX: SoSSI, SSR
-		    || p == &arm_gpio_ck // FIX: GPIO code for 1510
-		    ) {
-			printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n",
-			       p->name);
-			continue;
-		}
-
-		printk(KERN_INFO "Disabling unused clock \"%s\"... ", p->name);
-		__clk_disable(p);
-		printk(" done\n");
+	if (!custom_clocks) {
+		printk(KERN_ERR "No custom clock functions registered\n");
+		BUG();
 	}
 
+	arch_clock = custom_clocks;
+
 	return 0;
 }
-
-late_initcall(omap_late_clk_reset);
-
-#endif
diff --git a/arch/arm/plat-omap/clock.h b/arch/arm/plat-omap/clock.h
deleted file mode 100644
index a89e1e8c2519..000000000000
--- a/arch/arm/plat-omap/clock.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- *  linux/arch/arm/plat-omap/clock.h
- *
- *  Copyright (C) 2004 Nokia corporation
- *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_OMAP_CLOCK_H
-#define __ARCH_ARM_OMAP_CLOCK_H
-
-struct module;
-
-struct clk {
-	struct list_head	node;
-	struct module		*owner;
-	const char		*name;
-	struct clk		*parent;
-	unsigned long		rate;
-	__s8			usecount;
-	__u16			flags;
-	__u32			enable_reg;
-	__u8			enable_bit;
-	__u8			rate_offset;
-	void			(*recalc)(struct clk *);
-	int			(*set_rate)(struct clk *, unsigned long);
-	long			(*round_rate)(struct clk *, unsigned long);
-	void			(*init)(struct clk *);
-};
-
-
-struct mpu_rate {
-	unsigned long		rate;
-	unsigned long		xtal;
-	unsigned long		pll_rate;
-	__u16			ckctl_val;
-	__u16			dpllctl_val;
-};
-
-
-/* Clock flags */
-#define RATE_CKCTL		1
-#define RATE_FIXED		2
-#define RATE_PROPAGATES		4
-#define VIRTUAL_CLOCK		8
-#define ALWAYS_ENABLED		16
-#define ENABLE_REG_32BIT	32
-#define CLOCK_IN_OMAP16XX	64
-#define CLOCK_IN_OMAP1510	128
-#define CLOCK_IN_OMAP730	256
-#define DSP_DOMAIN_CLOCK	512
-#define VIRTUAL_IO_ADDRESS	1024
-
-/* ARM_CKCTL bit shifts */
-#define CKCTL_PERDIV_OFFSET	0
-#define CKCTL_LCDDIV_OFFSET	2
-#define CKCTL_ARMDIV_OFFSET	4
-#define CKCTL_DSPDIV_OFFSET	6
-#define CKCTL_TCDIV_OFFSET	8
-#define CKCTL_DSPMMUDIV_OFFSET	10
-/*#define ARM_TIMXO		12*/
-#define EN_DSPCK		13
-/*#define ARM_INTHCK_SEL	14*/ /* Divide-by-2 for mpu inth_ck */
-/* DSP_CKCTL bit shifts */
-#define CKCTL_DSPPERDIV_OFFSET	0
-
-/* ARM_IDLECT1 bit shifts */
-/*#define IDLWDT_ARM	0*/
-/*#define IDLXORP_ARM	1*/
-/*#define IDLPER_ARM	2*/
-/*#define IDLLCD_ARM	3*/
-/*#define IDLLB_ARM	4*/
-/*#define IDLHSAB_ARM	5*/
-/*#define IDLIF_ARM	6*/
-/*#define IDLDPLL_ARM	7*/
-/*#define IDLAPI_ARM	8*/
-/*#define IDLTIM_ARM	9*/
-/*#define SETARM_IDLE	11*/
-
-/* ARM_IDLECT2 bit shifts */
-#define EN_WDTCK	0
-#define EN_XORPCK	1
-#define EN_PERCK	2
-#define EN_LCDCK	3
-#define EN_LBCK		4 /* Not on 1610/1710 */
-/*#define EN_HSABCK	5*/
-#define EN_APICK	6
-#define EN_TIMCK	7
-#define DMACK_REQ	8
-#define EN_GPIOCK	9 /* Not on 1610/1710 */
-/*#define EN_LBFREECK	10*/
-#define EN_CKOUT_ARM	11
-
-/* ARM_IDLECT3 bit shifts */
-#define EN_OCPI_CK	0
-#define EN_TC1_CK	2
-#define EN_TC2_CK	4
-
-/* DSP_IDLECT2 bit shifts (0,1,2 are same as for ARM_IDLECT2) */
-#define EN_DSPTIMCK	5
-
-/* Various register defines for clock controls scattered around OMAP chip */
-#define USB_MCLK_EN_BIT		4	/* In ULPD_CLKC_CTRL */
-#define USB_HOST_HHC_UHOST_EN	9	/* In MOD_CONF_CTRL_0 */
-#define SWD_ULPD_PLL_CLK_REQ	1	/* In SWD_CLK_DIV_CTRL_SEL */
-#define COM_ULPD_PLL_CLK_REQ	1	/* In COM_CLK_DIV_CTRL_SEL */
-#define SWD_CLK_DIV_CTRL_SEL	0xfffe0874
-#define COM_CLK_DIV_CTRL_SEL	0xfffe0878
-#define SOFT_REQ_REG		0xfffe0834
-#define SOFT_REQ_REG2		0xfffe0880
-
-int clk_register(struct clk *clk);
-void clk_unregister(struct clk *clk);
-int clk_init(void);
-
-#endif
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 6cb20aea7f51..ccdb452630cf 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -25,14 +25,13 @@
 #include <asm/mach/map.h>
 #include <asm/hardware/clock.h>
 #include <asm/io.h>
-#include <asm/mach-types.h>
 #include <asm/setup.h>
 
 #include <asm/arch/board.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/fpga.h>
 
-#include "clock.h"
+#include <asm/arch/clock.h>
 
 #define NO_LENGTH_CHECK 0xffffffff
 
@@ -118,19 +117,43 @@ EXPORT_SYMBOL(omap_get_var_config);
 
 static int __init omap_add_serial_console(void)
 {
-	const struct omap_serial_console_config *info;
-
-	info = omap_get_config(OMAP_TAG_SERIAL_CONSOLE,
-			       struct omap_serial_console_config);
-	if (info != NULL && info->console_uart) {
-		static char speed[11], *opt = NULL;
+	const struct omap_serial_console_config *con_info;
+	const struct omap_uart_config *uart_info;
+	static char speed[11], *opt = NULL;
+	int line, i, uart_idx;
+
+	uart_info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
+	con_info = omap_get_config(OMAP_TAG_SERIAL_CONSOLE,
+					struct omap_serial_console_config);
+	if (uart_info == NULL || con_info == NULL)
+		return 0;
+
+	if (con_info->console_uart == 0)
+		return 0;
+
+	if (con_info->console_speed) {
+		snprintf(speed, sizeof(speed), "%u", con_info->console_speed);
+		opt = speed;
+	}
 
-		if (info->console_speed) {
-			snprintf(speed, sizeof(speed), "%u", info->console_speed);
-			opt = speed;
-		}
-		return add_preferred_console("ttyS", info->console_uart - 1, opt);
+	uart_idx = con_info->console_uart - 1;
+	if (uart_idx >= OMAP_MAX_NR_PORTS) {
+		printk(KERN_INFO "Console: external UART#%d. "
+			"Not adding it as console this time.\n",
+			uart_idx + 1);
+		return 0;
+	}
+	if (!(uart_info->enabled_uarts & (1 << uart_idx))) {
+		printk(KERN_ERR "Console: Selected UART#%d is "
+			"not enabled for this platform\n",
+			uart_idx + 1);
+		return -1;
+	}
+	line = 0;
+	for (i = 0; i < uart_idx; i++) {
+		if (uart_info->enabled_uarts & (1 << i))
+			line++;
 	}
-	return 0;
+	return add_preferred_console("ttyS", line, opt);
 }
 console_initcall(omap_add_serial_console);
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index 409aac2c4b9d..fd894bb00107 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -21,7 +21,6 @@
 #include <linux/err.h>
 
 #include <asm/hardware.h>
-#include <asm/mach-types.h>
 #include <asm/io.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
new file mode 100644
index 000000000000..9dcce904b608
--- /dev/null
+++ b/arch/arm/plat-omap/devices.c
@@ -0,0 +1,381 @@
+/*
+ * linux/arch/arm/plat-omap/devices.c
+ *
+ * Common platform device setup/initialization for OMAP1 and OMAP2
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/tc.h>
+#include <asm/arch/board.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/gpio.h>
+
+
+void omap_nop_release(struct device *dev)
+{
+        /* Nothing */
+}
+
+/*-------------------------------------------------------------------------*/
+
+#if 	defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
+
+#define	OMAP1_I2C_BASE		0xfffb3800
+#define OMAP2_I2C_BASE1		0x48070000
+#define OMAP_I2C_SIZE		0x3f
+#define OMAP1_I2C_INT		INT_I2C
+#define OMAP2_I2C_INT1		56
+
+static struct resource i2c_resources1[] = {
+	{
+		.start		= 0,
+		.end		= 0,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= 0,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+/* DMA not used; works around erratum writing to non-empty i2c fifo */
+
+static struct platform_device omap_i2c_device1 = {
+        .name           = "i2c_omap",
+        .id             = 1,
+        .dev = {
+                .release        = omap_nop_release,
+        },
+	.num_resources	= ARRAY_SIZE(i2c_resources1),
+	.resource	= i2c_resources1,
+};
+
+/* See also arch/arm/mach-omap2/devices.c for second I2C on 24xx */
+static void omap_init_i2c(void)
+{
+	if (cpu_is_omap24xx()) {
+		i2c_resources1[0].start = OMAP2_I2C_BASE1;
+		i2c_resources1[0].end = OMAP2_I2C_BASE1 + OMAP_I2C_SIZE;
+		i2c_resources1[1].start = OMAP2_I2C_INT1;
+	} else {
+		i2c_resources1[0].start = OMAP1_I2C_BASE;
+		i2c_resources1[0].end = OMAP1_I2C_BASE + OMAP_I2C_SIZE;
+		i2c_resources1[1].start = OMAP1_I2C_INT;
+	}
+
+	/* FIXME define and use a boot tag, in case of boards that
+	 * either don't wire up I2C, or chips that mux it differently...
+	 * it can include clocking and address info, maybe more.
+	 */
+	if (cpu_is_omap24xx()) {
+		omap_cfg_reg(M19_24XX_I2C1_SCL);
+		omap_cfg_reg(L15_24XX_I2C1_SDA);
+	} else {
+		omap_cfg_reg(I2C_SCL);
+		omap_cfg_reg(I2C_SDA);
+	}
+
+	(void) platform_device_register(&omap_i2c_device1);
+}
+
+#else
+static inline void omap_init_i2c(void) {}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#if	defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+
+#ifdef CONFIG_ARCH_OMAP24XX
+#define	OMAP_MMC1_BASE		0x4809c000
+#define OMAP_MMC1_INT		83
+#else
+#define	OMAP_MMC1_BASE		0xfffb7800
+#define OMAP_MMC1_INT		INT_MMC
+#endif
+#define	OMAP_MMC2_BASE		0xfffb7c00	/* omap16xx only */
+
+static struct omap_mmc_conf mmc1_conf;
+
+static u64 mmc1_dmamask = 0xffffffff;
+
+static struct resource mmc1_resources[] = {
+	{
+		.start		= IO_ADDRESS(OMAP_MMC1_BASE),
+		.end		= IO_ADDRESS(OMAP_MMC1_BASE) + 0x7f,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP_MMC1_INT,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mmc_omap_device1 = {
+	.name		= "mmci-omap",
+	.id		= 1,
+	.dev = {
+		.release	= omap_nop_release,
+		.dma_mask	= &mmc1_dmamask,
+		.platform_data	= &mmc1_conf,
+	},
+	.num_resources	= ARRAY_SIZE(mmc1_resources),
+	.resource	= mmc1_resources,
+};
+
+#ifdef	CONFIG_ARCH_OMAP16XX
+
+static struct omap_mmc_conf mmc2_conf;
+
+static u64 mmc2_dmamask = 0xffffffff;
+
+static struct resource mmc2_resources[] = {
+	{
+		.start		= IO_ADDRESS(OMAP_MMC2_BASE),
+		.end		= IO_ADDRESS(OMAP_MMC2_BASE) + 0x7f,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= INT_1610_MMC2,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mmc_omap_device2 = {
+	.name		= "mmci-omap",
+	.id		= 2,
+	.dev = {
+		.release	= omap_nop_release,
+		.dma_mask	= &mmc2_dmamask,
+		.platform_data	= &mmc2_conf,
+	},
+	.num_resources	= ARRAY_SIZE(mmc2_resources),
+	.resource	= mmc2_resources,
+};
+#endif
+
+static void __init omap_init_mmc(void)
+{
+	const struct omap_mmc_config	*mmc_conf;
+	const struct omap_mmc_conf	*mmc;
+
+	/* NOTE:  assumes MMC was never (wrongly) enabled */
+	mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
+	if (!mmc_conf)
+		return;
+
+	/* block 1 is always available and has just one pinout option */
+	mmc = &mmc_conf->mmc[0];
+	if (mmc->enabled) {
+		if (!cpu_is_omap24xx()) {
+			omap_cfg_reg(MMC_CMD);
+			omap_cfg_reg(MMC_CLK);
+			omap_cfg_reg(MMC_DAT0);
+			if (cpu_is_omap1710()) {
+				omap_cfg_reg(M15_1710_MMC_CLKI);
+				omap_cfg_reg(P19_1710_MMC_CMDDIR);
+				omap_cfg_reg(P20_1710_MMC_DATDIR0);
+			}
+		}
+		if (mmc->wire4) {
+			if (!cpu_is_omap24xx()) {
+				omap_cfg_reg(MMC_DAT1);
+				/* NOTE:  DAT2 can be on W10 (here) or M15 */
+				if (!mmc->nomux)
+					omap_cfg_reg(MMC_DAT2);
+				omap_cfg_reg(MMC_DAT3);
+			}
+		}
+		mmc1_conf = *mmc;
+		(void) platform_device_register(&mmc_omap_device1);
+	}
+
+#ifdef	CONFIG_ARCH_OMAP16XX
+	/* block 2 is on newer chips, and has many pinout options */
+	mmc = &mmc_conf->mmc[1];
+	if (mmc->enabled) {
+		if (!mmc->nomux) {
+			omap_cfg_reg(Y8_1610_MMC2_CMD);
+			omap_cfg_reg(Y10_1610_MMC2_CLK);
+			omap_cfg_reg(R18_1610_MMC2_CLKIN);
+			omap_cfg_reg(W8_1610_MMC2_DAT0);
+			if (mmc->wire4) {
+				omap_cfg_reg(V8_1610_MMC2_DAT1);
+				omap_cfg_reg(W15_1610_MMC2_DAT2);
+				omap_cfg_reg(R10_1610_MMC2_DAT3);
+			}
+
+			/* These are needed for the level shifter */
+			omap_cfg_reg(V9_1610_MMC2_CMDDIR);
+			omap_cfg_reg(V5_1610_MMC2_DATDIR0);
+			omap_cfg_reg(W19_1610_MMC2_DATDIR1);
+		}
+
+		/* Feedback clock must be set on OMAP-1710 MMC2 */
+		if (cpu_is_omap1710())
+			omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
+				     MOD_CONF_CTRL_1);
+		mmc2_conf = *mmc;
+		(void) platform_device_register(&mmc_omap_device2);
+	}
+#endif
+	return;
+}
+#else
+static inline void omap_init_mmc(void) {}
+#endif
+
+#if	defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
+
+#ifdef CONFIG_ARCH_OMAP24XX
+#define	OMAP_WDT_BASE		0x48022000
+#else
+#define	OMAP_WDT_BASE		0xfffeb000
+#endif
+
+static struct resource wdt_resources[] = {
+	{
+		.start		= OMAP_WDT_BASE,
+		.end		= OMAP_WDT_BASE + 0x4f,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device omap_wdt_device = {
+	.name	   = "omap_wdt",
+	.id	     = -1,
+	.dev = {
+		.release	= omap_nop_release,
+	},
+	.num_resources	= ARRAY_SIZE(wdt_resources),
+	.resource	= wdt_resources,
+};
+
+static void omap_init_wdt(void)
+{
+	(void) platform_device_register(&omap_wdt_device);
+}
+#else
+static inline void omap_init_wdt(void) {}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#if	defined(CONFIG_OMAP_RNG) || defined(CONFIG_OMAP_RNG_MODULE)
+
+#ifdef CONFIG_ARCH_OMAP24XX
+#define	OMAP_RNG_BASE		0x480A0000
+#else
+#define	OMAP_RNG_BASE		0xfffe5000
+#endif
+
+static struct resource rng_resources[] = {
+	{
+		.start		= OMAP_RNG_BASE,
+		.end		= OMAP_RNG_BASE + 0x4f,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device omap_rng_device = {
+	.name	   = "omap_rng",
+	.id	     = -1,
+	.dev = {
+		.release	= omap_nop_release,
+	},
+	.num_resources	= ARRAY_SIZE(rng_resources),
+	.resource	= rng_resources,
+};
+
+static void omap_init_rng(void)
+{
+	(void) platform_device_register(&omap_rng_device);
+}
+#else
+static inline void omap_init_rng(void) {}
+#endif
+
+#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
+
+static struct omap_lcd_config omap_fb_conf;
+
+static u64 omap_fb_dma_mask = ~(u32)0;
+
+static struct platform_device omap_fb_device = {
+	.name		= "omapfb",
+	.id		= -1,
+	.dev = {
+		.release		= omap_nop_release,
+		.dma_mask		= &omap_fb_dma_mask,
+		.coherent_dma_mask	= ~(u32)0,
+		.platform_data		= &omap_fb_conf,
+	},
+	.num_resources = 0,
+};
+
+static inline void omap_init_fb(void)
+{
+	const struct omap_lcd_config *conf;
+
+	conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
+	if (conf != NULL)
+		omap_fb_conf = *conf;
+	platform_device_register(&omap_fb_device);
+}
+
+#else
+
+static inline void omap_init_fb(void) {}
+
+#endif
+
+/*
+ * This gets called after board-specific INIT_MACHINE, and initializes most
+ * on-chip peripherals accessible on this board (except for few like USB):
+ *
+ *  (a) Does any "standard config" pin muxing needed.  Board-specific
+ *	code will have muxed GPIO pins and done "nonstandard" setup;
+ *	that code could live in the boot loader.
+ *  (b) Populating board-specific platform_data with the data drivers
+ *	rely on to handle wiring variations.
+ *  (c) Creating platform devices as meaningful on this board and
+ *	with this kernel configuration.
+ *
+ * Claiming GPIOs, and setting their direction and initial values, is the
+ * responsibility of the device drivers.  So is responding to probe().
+ *
+ * Board-specific knowlege like creating devices or pin setup is to be
+ * kept out of drivers as much as possible.  In particular, pin setup
+ * may be handled by the boot loader, and drivers should expect it will
+ * normally have been done by the time they're probed.
+ */
+static int __init omap_init_devices(void)
+{
+	/* please keep these calls, and their implementations above,
+	 * in alphabetical order so they're easier to sort through.
+	 */
+	omap_init_fb();
+	omap_init_i2c();
+	omap_init_mmc();
+	omap_init_wdt();
+	omap_init_rng();
+
+	return 0;
+}
+arch_initcall(omap_init_devices);
+
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index da7b65145658..f5cc21ad0956 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -6,6 +6,8 @@
  * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
  * Graphics DMA and LCD DMA graphics tranformations
  * by Imre Deak <imre.deak@nokia.com>
+ * OMAP2 support Copyright (C) 2004-2005 Texas Instruments, Inc.
+ * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
  * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
  *
  * Support functions for the OMAP internal DMA channels.
@@ -31,8 +33,15 @@
 
 #include <asm/arch/tc.h>
 
-#define OMAP_DMA_ACTIVE		0x01
+#define DEBUG_PRINTS
+#undef DEBUG_PRINTS
+#ifdef DEBUG_PRINTS
+#define debug_printk(x) printk x
+#else
+#define	debug_printk(x)
+#endif
 
+#define OMAP_DMA_ACTIVE		0x01
 #define OMAP_DMA_CCR_EN		(1 << 7)
 
 #define OMAP_FUNC_MUX_ARM_BASE	(0xfffe1000 + 0xec)
@@ -55,7 +64,7 @@ static int dma_chan_count;
 static spinlock_t dma_chan_lock;
 static struct omap_dma_lch dma_chan[OMAP_LOGICAL_DMA_CH_COUNT];
 
-const static u8 dma_irq[OMAP_LOGICAL_DMA_CH_COUNT] = {
+const static u8 omap1_dma_irq[OMAP_LOGICAL_DMA_CH_COUNT] = {
 	INT_DMA_CH0_6, INT_DMA_CH1_7, INT_DMA_CH2_8, INT_DMA_CH3,
 	INT_DMA_CH4, INT_DMA_CH5, INT_1610_DMA_CH6, INT_1610_DMA_CH7,
 	INT_1610_DMA_CH8, INT_1610_DMA_CH9, INT_1610_DMA_CH10,
@@ -63,6 +72,20 @@ const static u8 dma_irq[OMAP_LOGICAL_DMA_CH_COUNT] = {
 	INT_1610_DMA_CH14, INT_1610_DMA_CH15, INT_DMA_LCD
 };
 
+#define REVISIT_24XX()		printk(KERN_ERR "FIXME: no %s on 24xx\n", \
+						__FUNCTION__);
+
+#ifdef CONFIG_ARCH_OMAP15XX
+/* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
+int omap_dma_in_1510_mode(void)
+{
+	return enable_1510_mode;
+}
+#else
+#define omap_dma_in_1510_mode()		0
+#endif
+
+#ifdef CONFIG_ARCH_OMAP1
 static inline int get_gdma_dev(int req)
 {
 	u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4;
@@ -82,6 +105,9 @@ static inline void set_gdma_dev(int req, int dev)
 	l |= (dev - 1) << shift;
 	omap_writel(l, reg);
 }
+#else
+#define set_gdma_dev(req, dev)	do {} while (0)
+#endif
 
 static void clear_lch_regs(int lch)
 {
@@ -121,38 +147,62 @@ void omap_set_dma_priority(int dst_port, int priority)
 }
 
 void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
-				  int frame_count, int sync_mode)
+				  int frame_count, int sync_mode,
+				  int dma_trigger, int src_or_dst_synch)
 {
-	u16 w;
+	OMAP_DMA_CSDP_REG(lch) &= ~0x03;
+	OMAP_DMA_CSDP_REG(lch) |= data_type;
 
-	w = omap_readw(OMAP_DMA_CSDP(lch));
-	w &= ~0x03;
-	w |= data_type;
-	omap_writew(w, OMAP_DMA_CSDP(lch));
+	if (cpu_class_is_omap1()) {
+		OMAP_DMA_CCR_REG(lch) &= ~(1 << 5);
+		if (sync_mode == OMAP_DMA_SYNC_FRAME)
+			OMAP_DMA_CCR_REG(lch) |= 1 << 5;
+
+		OMAP1_DMA_CCR2_REG(lch) &= ~(1 << 2);
+		if (sync_mode == OMAP_DMA_SYNC_BLOCK)
+			OMAP1_DMA_CCR2_REG(lch) |= 1 << 2;
+	}
+
+	if (cpu_is_omap24xx() && dma_trigger) {
+		u32 val = OMAP_DMA_CCR_REG(lch);
+
+		if (dma_trigger > 63)
+			val |= 1 << 20;
+		if (dma_trigger > 31)
+			val |= 1 << 19;
 
-	w = omap_readw(OMAP_DMA_CCR(lch));
-	w &= ~(1 << 5);
-	if (sync_mode == OMAP_DMA_SYNC_FRAME)
-		w |= 1 << 5;
-	omap_writew(w, OMAP_DMA_CCR(lch));
+		val |= (dma_trigger & 0x1f);
 
-	w = omap_readw(OMAP_DMA_CCR2(lch));
-	w &= ~(1 << 2);
-	if (sync_mode == OMAP_DMA_SYNC_BLOCK)
-		w |= 1 << 2;
-	omap_writew(w, OMAP_DMA_CCR2(lch));
+		if (sync_mode & OMAP_DMA_SYNC_FRAME)
+			val |= 1 << 5;
 
-	omap_writew(elem_count, OMAP_DMA_CEN(lch));
-	omap_writew(frame_count, OMAP_DMA_CFN(lch));
+		if (sync_mode & OMAP_DMA_SYNC_BLOCK)
+			val |= 1 << 18;
 
+		if (src_or_dst_synch)
+			val |= 1 << 24;		/* source synch */
+		else
+			val &= ~(1 << 24);	/* dest synch */
+
+		OMAP_DMA_CCR_REG(lch) = val;
+	}
+
+	OMAP_DMA_CEN_REG(lch) = elem_count;
+	OMAP_DMA_CFN_REG(lch) = frame_count;
 }
+
 void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
 {
 	u16 w;
 
 	BUG_ON(omap_dma_in_1510_mode());
 
-	w = omap_readw(OMAP_DMA_CCR2(lch)) & ~0x03;
+	if (cpu_is_omap24xx()) {
+		REVISIT_24XX();
+		return;
+	}
+
+	w = OMAP1_DMA_CCR2_REG(lch) & ~0x03;
 	switch (mode) {
 	case OMAP_DMA_CONSTANT_FILL:
 		w |= 0x01;
@@ -165,63 +215,84 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
 	default:
 		BUG();
 	}
-	omap_writew(w, OMAP_DMA_CCR2(lch));
+	OMAP1_DMA_CCR2_REG(lch) = w;
 
-	w = omap_readw(OMAP_DMA_LCH_CTRL(lch)) & ~0x0f;
+	w = OMAP1_DMA_LCH_CTRL_REG(lch) & ~0x0f;
 	/* Default is channel type 2D */
 	if (mode) {
-		omap_writew((u16)color, OMAP_DMA_COLOR_L(lch));
-		omap_writew((u16)(color >> 16), OMAP_DMA_COLOR_U(lch));
+		OMAP1_DMA_COLOR_L_REG(lch) = (u16)color;
+		OMAP1_DMA_COLOR_U_REG(lch) = (u16)(color >> 16);
 		w |= 1;		/* Channel type G */
 	}
-	omap_writew(w, OMAP_DMA_LCH_CTRL(lch));
+	OMAP1_DMA_LCH_CTRL_REG(lch) = w;
 }
 
-
+/* Note that src_port is only for omap1 */
 void omap_set_dma_src_params(int lch, int src_port, int src_amode,
-			     unsigned long src_start)
+			     unsigned long src_start,
+			     int src_ei, int src_fi)
 {
-	u16 w;
+	if (cpu_class_is_omap1()) {
+		OMAP_DMA_CSDP_REG(lch) &= ~(0x1f << 2);
+		OMAP_DMA_CSDP_REG(lch) |= src_port << 2;
+	}
+
+	OMAP_DMA_CCR_REG(lch) &= ~(0x03 << 12);
+	OMAP_DMA_CCR_REG(lch) |= src_amode << 12;
+
+	if (cpu_class_is_omap1()) {
+		OMAP1_DMA_CSSA_U_REG(lch) = src_start >> 16;
+		OMAP1_DMA_CSSA_L_REG(lch) = src_start;
+	}
 
-	w = omap_readw(OMAP_DMA_CSDP(lch));
-	w &= ~(0x1f << 2);
-	w |= src_port << 2;
-	omap_writew(w, OMAP_DMA_CSDP(lch));
+	if (cpu_is_omap24xx())
+		OMAP2_DMA_CSSA_REG(lch) = src_start;
 
-	w = omap_readw(OMAP_DMA_CCR(lch));
-	w &= ~(0x03 << 12);
-	w |= src_amode << 12;
-	omap_writew(w, OMAP_DMA_CCR(lch));
+	OMAP_DMA_CSEI_REG(lch) = src_ei;
+	OMAP_DMA_CSFI_REG(lch) = src_fi;
+}
 
-	omap_writew(src_start >> 16, OMAP_DMA_CSSA_U(lch));
-	omap_writew(src_start, OMAP_DMA_CSSA_L(lch));
+void omap_set_dma_params(int lch, struct omap_dma_channel_params * params)
+{
+	omap_set_dma_transfer_params(lch, params->data_type,
+				     params->elem_count, params->frame_count,
+				     params->sync_mode, params->trigger,
+				     params->src_or_dst_synch);
+	omap_set_dma_src_params(lch, params->src_port,
+				params->src_amode, params->src_start,
+				params->src_ei, params->src_fi);
+
+	omap_set_dma_dest_params(lch, params->dst_port,
+				 params->dst_amode, params->dst_start,
+				 params->dst_ei, params->dst_fi);
 }
 
 void omap_set_dma_src_index(int lch, int eidx, int fidx)
 {
-	omap_writew(eidx, OMAP_DMA_CSEI(lch));
-	omap_writew(fidx, OMAP_DMA_CSFI(lch));
+	if (cpu_is_omap24xx()) {
+		REVISIT_24XX();
+		return;
+	}
+	OMAP_DMA_CSEI_REG(lch) = eidx;
+	OMAP_DMA_CSFI_REG(lch) = fidx;
 }
 
 void omap_set_dma_src_data_pack(int lch, int enable)
 {
-	u16 w;
-
-	w = omap_readw(OMAP_DMA_CSDP(lch)) & ~(1 << 6);
-	w |= enable ? (1 << 6) : 0;
-	omap_writew(w, OMAP_DMA_CSDP(lch));
+	OMAP_DMA_CSDP_REG(lch) &= ~(1 << 6);
+	if (enable)
+		OMAP_DMA_CSDP_REG(lch) |= (1 << 6);
 }
 
 void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
 {
-	u16 w;
+	OMAP_DMA_CSDP_REG(lch) &= ~(0x03 << 7);
 
-	w = omap_readw(OMAP_DMA_CSDP(lch)) & ~(0x03 << 7);
 	switch (burst_mode) {
 	case OMAP_DMA_DATA_BURST_DIS:
 		break;
 	case OMAP_DMA_DATA_BURST_4:
-		w |= (0x01 << 7);
+		OMAP_DMA_CSDP_REG(lch) |= (0x02 << 7);
 		break;
 	case OMAP_DMA_DATA_BURST_8:
 		/* not supported by current hardware
@@ -231,110 +302,283 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
 	default:
 		BUG();
 	}
-	omap_writew(w, OMAP_DMA_CSDP(lch));
 }
 
+/* Note that dest_port is only for OMAP1 */
 void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
-			      unsigned long dest_start)
+			      unsigned long dest_start,
+			      int dst_ei, int dst_fi)
 {
-	u16 w;
+	if (cpu_class_is_omap1()) {
+		OMAP_DMA_CSDP_REG(lch) &= ~(0x1f << 9);
+		OMAP_DMA_CSDP_REG(lch) |= dest_port << 9;
+	}
 
-	w = omap_readw(OMAP_DMA_CSDP(lch));
-	w &= ~(0x1f << 9);
-	w |= dest_port << 9;
-	omap_writew(w, OMAP_DMA_CSDP(lch));
+	OMAP_DMA_CCR_REG(lch) &= ~(0x03 << 14);
+	OMAP_DMA_CCR_REG(lch) |= dest_amode << 14;
+
+	if (cpu_class_is_omap1()) {
+		OMAP1_DMA_CDSA_U_REG(lch) = dest_start >> 16;
+		OMAP1_DMA_CDSA_L_REG(lch) = dest_start;
+	}
 
-	w = omap_readw(OMAP_DMA_CCR(lch));
-	w &= ~(0x03 << 14);
-	w |= dest_amode << 14;
-	omap_writew(w, OMAP_DMA_CCR(lch));
+	if (cpu_is_omap24xx())
+		OMAP2_DMA_CDSA_REG(lch) = dest_start;
 
-	omap_writew(dest_start >> 16, OMAP_DMA_CDSA_U(lch));
-	omap_writew(dest_start, OMAP_DMA_CDSA_L(lch));
+	OMAP_DMA_CDEI_REG(lch) = dst_ei;
+	OMAP_DMA_CDFI_REG(lch) = dst_fi;
 }
 
 void omap_set_dma_dest_index(int lch, int eidx, int fidx)
 {
-	omap_writew(eidx, OMAP_DMA_CDEI(lch));
-	omap_writew(fidx, OMAP_DMA_CDFI(lch));
+	if (cpu_is_omap24xx()) {
+		REVISIT_24XX();
+		return;
+	}
+	OMAP_DMA_CDEI_REG(lch) = eidx;
+	OMAP_DMA_CDFI_REG(lch) = fidx;
 }
 
 void omap_set_dma_dest_data_pack(int lch, int enable)
 {
-	u16 w;
-
-	w = omap_readw(OMAP_DMA_CSDP(lch)) & ~(1 << 13);
-	w |= enable ? (1 << 13) : 0;
-	omap_writew(w, OMAP_DMA_CSDP(lch));
+	OMAP_DMA_CSDP_REG(lch) &= ~(1 << 13);
+	if (enable)
+		OMAP_DMA_CSDP_REG(lch) |= 1 << 13;
 }
 
 void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
 {
-	u16 w;
+	OMAP_DMA_CSDP_REG(lch) &= ~(0x03 << 14);
 
-	w = omap_readw(OMAP_DMA_CSDP(lch)) & ~(0x03 << 14);
 	switch (burst_mode) {
 	case OMAP_DMA_DATA_BURST_DIS:
 		break;
 	case OMAP_DMA_DATA_BURST_4:
-		w |= (0x01 << 14);
+		OMAP_DMA_CSDP_REG(lch) |= (0x02 << 14);
 		break;
 	case OMAP_DMA_DATA_BURST_8:
-		w |= (0x03 << 14);
+		OMAP_DMA_CSDP_REG(lch) |= (0x03 << 14);
 		break;
 	default:
 		printk(KERN_ERR "Invalid DMA burst mode\n");
 		BUG();
 		return;
 	}
-	omap_writew(w, OMAP_DMA_CSDP(lch));
 }
 
-static inline void init_intr(int lch)
+static inline void omap_enable_channel_irq(int lch)
 {
-	u16 w;
+	u32 status;
 
 	/* Read CSR to make sure it's cleared. */
-	w = omap_readw(OMAP_DMA_CSR(lch));
+	status = OMAP_DMA_CSR_REG(lch);
+
 	/* Enable some nice interrupts. */
-	omap_writew(dma_chan[lch].enabled_irqs, OMAP_DMA_CICR(lch));
+	OMAP_DMA_CICR_REG(lch) = dma_chan[lch].enabled_irqs;
+
 	dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
 }
 
-static inline void enable_lnk(int lch)
+static void omap_disable_channel_irq(int lch)
 {
-	u16 w;
+	if (cpu_is_omap24xx())
+		OMAP_DMA_CICR_REG(lch) = 0;
+}
+
+void omap_enable_dma_irq(int lch, u16 bits)
+{
+	dma_chan[lch].enabled_irqs |= bits;
+}
 
-	/* Clear the STOP_LNK bits */
-	w = omap_readw(OMAP_DMA_CLNK_CTRL(lch));
-	w &= ~(1 << 14);
-	omap_writew(w, OMAP_DMA_CLNK_CTRL(lch));
+void omap_disable_dma_irq(int lch, u16 bits)
+{
+	dma_chan[lch].enabled_irqs &= ~bits;
+}
+
+static inline void enable_lnk(int lch)
+{
+	if (cpu_class_is_omap1())
+		OMAP_DMA_CLNK_CTRL_REG(lch) &= ~(1 << 14);
 
-	/* And set the ENABLE_LNK bits */
+	/* Set the ENABLE_LNK bits */
 	if (dma_chan[lch].next_lch != -1)
-		omap_writew(dma_chan[lch].next_lch | (1 << 15),
-			    OMAP_DMA_CLNK_CTRL(lch));
+		OMAP_DMA_CLNK_CTRL_REG(lch) =
+			dma_chan[lch].next_lch | (1 << 15);
 }
 
 static inline void disable_lnk(int lch)
 {
-	u16 w;
-
 	/* Disable interrupts */
-	omap_writew(0, OMAP_DMA_CICR(lch));
+	if (cpu_class_is_omap1()) {
+		OMAP_DMA_CICR_REG(lch) = 0;
+		/* Set the STOP_LNK bit */
+		OMAP_DMA_CLNK_CTRL_REG(lch) |= 1 << 14;
+	}
 
-	/* Set the STOP_LNK bit */
-	w = omap_readw(OMAP_DMA_CLNK_CTRL(lch));
-	w |= (1 << 14);
-	w = omap_writew(w, OMAP_DMA_CLNK_CTRL(lch));
+	if (cpu_is_omap24xx()) {
+		omap_disable_channel_irq(lch);
+		/* Clear the ENABLE_LNK bit */
+		OMAP_DMA_CLNK_CTRL_REG(lch) &= ~(1 << 15);
+	}
 
 	dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
 }
 
-void omap_start_dma(int lch)
+static inline void omap2_enable_irq_lch(int lch)
 {
-	u16 w;
+	u32 val;
+
+	if (!cpu_is_omap24xx())
+		return;
+
+	val = omap_readl(OMAP_DMA4_IRQENABLE_L0);
+	val |= 1 << lch;
+	omap_writel(val, OMAP_DMA4_IRQENABLE_L0);
+}
+
+int omap_request_dma(int dev_id, const char *dev_name,
+		     void (* callback)(int lch, u16 ch_status, void *data),
+		     void *data, int *dma_ch_out)
+{
+	int ch, free_ch = -1;
+	unsigned long flags;
+	struct omap_dma_lch *chan;
+
+	spin_lock_irqsave(&dma_chan_lock, flags);
+	for (ch = 0; ch < dma_chan_count; ch++) {
+		if (free_ch == -1 && dma_chan[ch].dev_id == -1) {
+			free_ch = ch;
+			if (dev_id == 0)
+				break;
+		}
+	}
+	if (free_ch == -1) {
+		spin_unlock_irqrestore(&dma_chan_lock, flags);
+		return -EBUSY;
+	}
+	chan = dma_chan + free_ch;
+	chan->dev_id = dev_id;
+
+	if (cpu_class_is_omap1())
+		clear_lch_regs(free_ch);
 
+	if (cpu_is_omap24xx())
+		omap_clear_dma(free_ch);
+
+	spin_unlock_irqrestore(&dma_chan_lock, flags);
+
+	chan->dev_name = dev_name;
+	chan->callback = callback;
+	chan->data = data;
+	chan->enabled_irqs = OMAP_DMA_TOUT_IRQ | OMAP_DMA_DROP_IRQ |
+				OMAP_DMA_BLOCK_IRQ;
+
+	if (cpu_is_omap24xx())
+		chan->enabled_irqs |= OMAP2_DMA_TRANS_ERR_IRQ;
+
+	if (cpu_is_omap16xx()) {
+		/* If the sync device is set, configure it dynamically. */
+		if (dev_id != 0) {
+			set_gdma_dev(free_ch + 1, dev_id);
+			dev_id = free_ch + 1;
+		}
+		/* Disable the 1510 compatibility mode and set the sync device
+		 * id. */
+		OMAP_DMA_CCR_REG(free_ch) = dev_id | (1 << 10);
+	} else if (cpu_is_omap730() || cpu_is_omap15xx()) {
+		OMAP_DMA_CCR_REG(free_ch) = dev_id;
+	}
+
+	if (cpu_is_omap24xx()) {
+		omap2_enable_irq_lch(free_ch);
+
+		omap_enable_channel_irq(free_ch);
+		/* Clear the CSR register and IRQ status register */
+		OMAP_DMA_CSR_REG(free_ch) = 0x0;
+		omap_writel(~0x0, OMAP_DMA4_IRQSTATUS_L0);
+	}
+
+	*dma_ch_out = free_ch;
+
+	return 0;
+}
+
+void omap_free_dma(int lch)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&dma_chan_lock, flags);
+	if (dma_chan[lch].dev_id == -1) {
+		printk("omap_dma: trying to free nonallocated DMA channel %d\n",
+		       lch);
+		spin_unlock_irqrestore(&dma_chan_lock, flags);
+		return;
+	}
+	dma_chan[lch].dev_id = -1;
+	dma_chan[lch].next_lch = -1;
+	dma_chan[lch].callback = NULL;
+	spin_unlock_irqrestore(&dma_chan_lock, flags);
+
+	if (cpu_class_is_omap1()) {
+		/* Disable all DMA interrupts for the channel. */
+		OMAP_DMA_CICR_REG(lch) = 0;
+		/* Make sure the DMA transfer is stopped. */
+		OMAP_DMA_CCR_REG(lch) = 0;
+	}
+
+	if (cpu_is_omap24xx()) {
+		u32 val;
+		/* Disable interrupts */
+		val = omap_readl(OMAP_DMA4_IRQENABLE_L0);
+		val &= ~(1 << lch);
+		omap_writel(val, OMAP_DMA4_IRQENABLE_L0);
+
+		/* Clear the CSR register and IRQ status register */
+		OMAP_DMA_CSR_REG(lch) = 0x0;
+
+		val = omap_readl(OMAP_DMA4_IRQSTATUS_L0);
+		val |= 1 << lch;
+		omap_writel(val, OMAP_DMA4_IRQSTATUS_L0);
+
+		/* Disable all DMA interrupts for the channel. */
+		OMAP_DMA_CICR_REG(lch) = 0;
+
+		/* Make sure the DMA transfer is stopped. */
+		OMAP_DMA_CCR_REG(lch) = 0;
+		omap_clear_dma(lch);
+	}
+}
+
+/*
+ * Clears any DMA state so the DMA engine is ready to restart with new buffers
+ * through omap_start_dma(). Any buffers in flight are discarded.
+ */
+void omap_clear_dma(int lch)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	if (cpu_class_is_omap1()) {
+		int status;
+		OMAP_DMA_CCR_REG(lch) &= ~OMAP_DMA_CCR_EN;
+
+		/* Clear pending interrupts */
+		status = OMAP_DMA_CSR_REG(lch);
+	}
+
+	if (cpu_is_omap24xx()) {
+		int i;
+		u32 lch_base = OMAP24XX_DMA_BASE + lch * 0x60 + 0x80;
+		for (i = 0; i < 0x44; i += 4)
+			omap_writel(0, lch_base + i);
+	}
+
+	local_irq_restore(flags);
+}
+
+void omap_start_dma(int lch)
+{
 	if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
 		int next_lch, cur_lch;
 		char dma_chan_link_map[OMAP_LOGICAL_DMA_CH_COUNT];
@@ -348,31 +592,37 @@ void omap_start_dma(int lch)
 		do {
 			next_lch = dma_chan[cur_lch].next_lch;
 
-                        /* The loop case: we've been here already */
+			/* The loop case: we've been here already */
 			if (dma_chan_link_map[cur_lch])
 				break;
 			/* Mark the current channel */
 			dma_chan_link_map[cur_lch] = 1;
 
 			enable_lnk(cur_lch);
-			init_intr(cur_lch);
+			omap_enable_channel_irq(cur_lch);
 
 			cur_lch = next_lch;
 		} while (next_lch != -1);
+	} else if (cpu_is_omap24xx()) {
+		/* Errata: Need to write lch even if not using chaining */
+		OMAP_DMA_CLNK_CTRL_REG(lch) = lch;
 	}
 
-	init_intr(lch);
+	omap_enable_channel_irq(lch);
+
+	/* Errata: On ES2.0 BUFFERING disable must be set.
+	 * This will always fail on ES1.0 */
+	if (cpu_is_omap24xx()) {
+		OMAP_DMA_CCR_REG(lch) |= OMAP_DMA_CCR_EN;
+	}
+
+	OMAP_DMA_CCR_REG(lch) |= OMAP_DMA_CCR_EN;
 
-	w = omap_readw(OMAP_DMA_CCR(lch));
-	w |= OMAP_DMA_CCR_EN;
-	omap_writew(w, OMAP_DMA_CCR(lch));
 	dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
 }
 
 void omap_stop_dma(int lch)
 {
-	u16 w;
-
 	if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
 		int next_lch, cur_lch = lch;
 		char dma_chan_link_map[OMAP_LOGICAL_DMA_CH_COUNT];
@@ -393,146 +643,83 @@ void omap_stop_dma(int lch)
 
 		return;
 	}
+
 	/* Disable all interrupts on the channel */
-	omap_writew(0, OMAP_DMA_CICR(lch));
+	if (cpu_class_is_omap1())
+		OMAP_DMA_CICR_REG(lch) = 0;
 
-	w = omap_readw(OMAP_DMA_CCR(lch));
-	w &= ~OMAP_DMA_CCR_EN;
-	omap_writew(w, OMAP_DMA_CCR(lch));
+	OMAP_DMA_CCR_REG(lch) &= ~OMAP_DMA_CCR_EN;
 	dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
 }
 
-void omap_enable_dma_irq(int lch, u16 bits)
+/*
+ * Returns current physical source address for the given DMA channel.
+ * If the channel is running the caller must disable interrupts prior calling
+ * this function and process the returned value before re-enabling interrupt to
+ * prevent races with the interrupt handler. Note that in continuous mode there
+ * is a chance for CSSA_L register overflow inbetween the two reads resulting
+ * in incorrect return value.
+ */
+dma_addr_t omap_get_dma_src_pos(int lch)
 {
-	dma_chan[lch].enabled_irqs |= bits;
-}
+	dma_addr_t offset;
 
-void omap_disable_dma_irq(int lch, u16 bits)
-{
-	dma_chan[lch].enabled_irqs &= ~bits;
-}
+	if (cpu_class_is_omap1())
+		offset = (dma_addr_t) (OMAP1_DMA_CSSA_L_REG(lch) |
+				       (OMAP1_DMA_CSSA_U_REG(lch) << 16));
 
-static int dma_handle_ch(int ch)
-{
-	u16 csr;
+	if (cpu_is_omap24xx())
+		offset = OMAP_DMA_CSAC_REG(lch);
 
-	if (enable_1510_mode && ch >= 6) {
-		csr = dma_chan[ch].saved_csr;
-		dma_chan[ch].saved_csr = 0;
-	} else
-		csr = omap_readw(OMAP_DMA_CSR(ch));
-	if (enable_1510_mode && ch <= 2 && (csr >> 7) != 0) {
-		dma_chan[ch + 6].saved_csr = csr >> 7;
-		csr &= 0x7f;
-	}
-	if ((csr & 0x3f) == 0)
-		return 0;
-	if (unlikely(dma_chan[ch].dev_id == -1)) {
-		printk(KERN_WARNING "Spurious interrupt from DMA channel %d (CSR %04x)\n",
-		       ch, csr);
-		return 0;
-	}
-	if (unlikely(csr & OMAP_DMA_TOUT_IRQ))
-		printk(KERN_WARNING "DMA timeout with device %d\n", dma_chan[ch].dev_id);
-	if (unlikely(csr & OMAP_DMA_DROP_IRQ))
-		printk(KERN_WARNING "DMA synchronization event drop occurred with device %d\n",
-		       dma_chan[ch].dev_id);
-	if (likely(csr & OMAP_DMA_BLOCK_IRQ))
-		dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
-	if (likely(dma_chan[ch].callback != NULL))
-		dma_chan[ch].callback(ch, csr, dma_chan[ch].data);
-	return 1;
+	return offset;
 }
 
-static irqreturn_t dma_irq_handler(int irq, void *dev_id, struct pt_regs *regs)
+/*
+ * Returns current physical destination address for the given DMA channel.
+ * If the channel is running the caller must disable interrupts prior calling
+ * this function and process the returned value before re-enabling interrupt to
+ * prevent races with the interrupt handler. Note that in continuous mode there
+ * is a chance for CDSA_L register overflow inbetween the two reads resulting
+ * in incorrect return value.
+ */
+dma_addr_t omap_get_dma_dst_pos(int lch)
 {
-	int ch = ((int) dev_id) - 1;
-	int handled = 0;
+	dma_addr_t offset;
 
-	for (;;) {
-		int handled_now = 0;
+	if (cpu_class_is_omap1())
+		offset = (dma_addr_t) (OMAP1_DMA_CDSA_L_REG(lch) |
+				       (OMAP1_DMA_CDSA_U_REG(lch) << 16));
 
-		handled_now += dma_handle_ch(ch);
-		if (enable_1510_mode && dma_chan[ch + 6].saved_csr)
-			handled_now += dma_handle_ch(ch + 6);
-		if (!handled_now)
-			break;
-		handled += handled_now;
-	}
+	if (cpu_is_omap24xx())
+		offset = OMAP2_DMA_CDSA_REG(lch);
 
-	return handled ? IRQ_HANDLED : IRQ_NONE;
+	return offset;
 }
 
-int omap_request_dma(int dev_id, const char *dev_name,
-		     void (* callback)(int lch, u16 ch_status, void *data),
-		     void *data, int *dma_ch_out)
+/*
+ * Returns current source transfer counting for the given DMA channel.
+ * Can be used to monitor the progress of a transfer inside a block.
+ * It must be called with disabled interrupts.
+ */
+int omap_get_dma_src_addr_counter(int lch)
 {
-	int ch, free_ch = -1;
-	unsigned long flags;
-	struct omap_dma_lch *chan;
-
-	spin_lock_irqsave(&dma_chan_lock, flags);
-	for (ch = 0; ch < dma_chan_count; ch++) {
-		if (free_ch == -1 && dma_chan[ch].dev_id == -1) {
-			free_ch = ch;
-			if (dev_id == 0)
-				break;
-		}
-	}
-	if (free_ch == -1) {
-		spin_unlock_irqrestore(&dma_chan_lock, flags);
-		return -EBUSY;
-	}
-	chan = dma_chan + free_ch;
-	chan->dev_id = dev_id;
-	clear_lch_regs(free_ch);
-	spin_unlock_irqrestore(&dma_chan_lock, flags);
-
-	chan->dev_id = dev_id;
-	chan->dev_name = dev_name;
-	chan->callback = callback;
-	chan->data = data;
-	chan->enabled_irqs = OMAP_DMA_TOUT_IRQ | OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
-
-	if (cpu_is_omap16xx()) {
-		/* If the sync device is set, configure it dynamically. */
-		if (dev_id != 0) {
-			set_gdma_dev(free_ch + 1, dev_id);
-			dev_id = free_ch + 1;
-		}
-		/* Disable the 1510 compatibility mode and set the sync device
-		 * id. */
-		omap_writew(dev_id | (1 << 10), OMAP_DMA_CCR(free_ch));
-	} else {
-		omap_writew(dev_id, OMAP_DMA_CCR(free_ch));
-	}
-	*dma_ch_out = free_ch;
-
-	return 0;
+	return (dma_addr_t) OMAP_DMA_CSAC_REG(lch);
 }
 
-void omap_free_dma(int ch)
+int omap_dma_running(void)
 {
-	unsigned long flags;
+	int lch;
 
-	spin_lock_irqsave(&dma_chan_lock, flags);
-	if (dma_chan[ch].dev_id == -1) {
-		printk("omap_dma: trying to free nonallocated DMA channel %d\n", ch);
-		spin_unlock_irqrestore(&dma_chan_lock, flags);
-		return;
-	}
-	dma_chan[ch].dev_id = -1;
-	spin_unlock_irqrestore(&dma_chan_lock, flags);
+	/* Check if LCD DMA is running */
+	if (cpu_is_omap16xx())
+		if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)
+			return 1;
 
-	/* Disable all DMA interrupts for the channel. */
-	omap_writew(0, OMAP_DMA_CICR(ch));
-	/* Make sure the DMA transfer is stopped. */
-	omap_writew(0, OMAP_DMA_CCR(ch));
-}
+	for (lch = 0; lch < dma_chan_count; lch++)
+		if (OMAP_DMA_CCR_REG(lch) & OMAP_DMA_CCR_EN)
+			return 1;
 
-int omap_dma_in_1510_mode(void)
-{
-	return enable_1510_mode;
+	return 0;
 }
 
 /*
@@ -550,7 +737,8 @@ void omap_dma_link_lch (int lch_head, int lch_queue)
 
 	if ((dma_chan[lch_head].dev_id == -1) ||
 	    (dma_chan[lch_queue].dev_id == -1)) {
-		printk(KERN_ERR "omap_dma: trying to link non requested channels\n");
+		printk(KERN_ERR "omap_dma: trying to link "
+		       "non requested channels\n");
 		dump_stack();
 	}
 
@@ -570,20 +758,149 @@ void omap_dma_unlink_lch (int lch_head, int lch_queue)
 
 	if (dma_chan[lch_head].next_lch != lch_queue ||
 	    dma_chan[lch_head].next_lch == -1) {
-		printk(KERN_ERR "omap_dma: trying to unlink non linked channels\n");
+		printk(KERN_ERR "omap_dma: trying to unlink "
+		       "non linked channels\n");
 		dump_stack();
 	}
 
 
 	if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) ||
 	    (dma_chan[lch_head].flags & OMAP_DMA_ACTIVE)) {
-		printk(KERN_ERR "omap_dma: You need to stop the DMA channels before unlinking\n");
+		printk(KERN_ERR "omap_dma: You need to stop the DMA channels "
+		       "before unlinking\n");
 		dump_stack();
 	}
 
 	dma_chan[lch_head].next_lch = -1;
 }
 
+/*----------------------------------------------------------------------------*/
+
+#ifdef CONFIG_ARCH_OMAP1
+
+static int omap1_dma_handle_ch(int ch)
+{
+	u16 csr;
+
+	if (enable_1510_mode && ch >= 6) {
+		csr = dma_chan[ch].saved_csr;
+		dma_chan[ch].saved_csr = 0;
+	} else
+		csr = OMAP_DMA_CSR_REG(ch);
+	if (enable_1510_mode && ch <= 2 && (csr >> 7) != 0) {
+		dma_chan[ch + 6].saved_csr = csr >> 7;
+		csr &= 0x7f;
+	}
+	if ((csr & 0x3f) == 0)
+		return 0;
+	if (unlikely(dma_chan[ch].dev_id == -1)) {
+		printk(KERN_WARNING "Spurious interrupt from DMA channel "
+		       "%d (CSR %04x)\n", ch, csr);
+		return 0;
+	}
+	if (unlikely(csr & OMAP_DMA_TOUT_IRQ))
+		printk(KERN_WARNING "DMA timeout with device %d\n",
+		       dma_chan[ch].dev_id);
+	if (unlikely(csr & OMAP_DMA_DROP_IRQ))
+		printk(KERN_WARNING "DMA synchronization event drop occurred "
+		       "with device %d\n", dma_chan[ch].dev_id);
+	if (likely(csr & OMAP_DMA_BLOCK_IRQ))
+		dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
+	if (likely(dma_chan[ch].callback != NULL))
+		dma_chan[ch].callback(ch, csr, dma_chan[ch].data);
+	return 1;
+}
+
+static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id,
+					 struct pt_regs *regs)
+{
+	int ch = ((int) dev_id) - 1;
+	int handled = 0;
+
+	for (;;) {
+		int handled_now = 0;
+
+		handled_now += omap1_dma_handle_ch(ch);
+		if (enable_1510_mode && dma_chan[ch + 6].saved_csr)
+			handled_now += omap1_dma_handle_ch(ch + 6);
+		if (!handled_now)
+			break;
+		handled += handled_now;
+	}
+
+	return handled ? IRQ_HANDLED : IRQ_NONE;
+}
+
+#else
+#define omap1_dma_irq_handler	NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2
+
+static int omap2_dma_handle_ch(int ch)
+{
+	u32 status = OMAP_DMA_CSR_REG(ch);
+	u32 val;
+
+	if (!status)
+		return 0;
+	if (unlikely(dma_chan[ch].dev_id == -1))
+		return 0;
+	/* REVISIT: According to 24xx TRM, there's no TOUT_IE */
+	if (unlikely(status & OMAP_DMA_TOUT_IRQ))
+		printk(KERN_INFO "DMA timeout with device %d\n",
+		       dma_chan[ch].dev_id);
+	if (unlikely(status & OMAP_DMA_DROP_IRQ))
+		printk(KERN_INFO
+		       "DMA synchronization event drop occurred with device "
+		       "%d\n", dma_chan[ch].dev_id);
+
+	if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ))
+		printk(KERN_INFO "DMA transaction error with device %d\n",
+		       dma_chan[ch].dev_id);
+
+	OMAP_DMA_CSR_REG(ch) = 0x20;
+
+	val = omap_readl(OMAP_DMA4_IRQSTATUS_L0);
+	/* ch in this function is from 0-31 while in register it is 1-32 */
+	val = 1 << (ch);
+	omap_writel(val, OMAP_DMA4_IRQSTATUS_L0);
+
+	if (likely(dma_chan[ch].callback != NULL))
+		dma_chan[ch].callback(ch, status, dma_chan[ch].data);
+
+	return 0;
+}
+
+/* STATUS register count is from 1-32 while our is 0-31 */
+static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id,
+					 struct pt_regs *regs)
+{
+	u32 val;
+	int i;
+
+	val = omap_readl(OMAP_DMA4_IRQSTATUS_L0);
+
+	for (i = 1; i <= OMAP_LOGICAL_DMA_CH_COUNT; i++) {
+		int active = val & (1 << (i - 1));
+		if (active)
+			omap2_dma_handle_ch(i - 1);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction omap24xx_dma_irq = {
+	.name = "DMA",
+	.handler = omap2_dma_irq_handler,
+	.flags = SA_INTERRUPT
+};
+
+#else
+static struct irqaction omap24xx_dma_irq;
+#endif
+
+/*----------------------------------------------------------------------------*/
 
 static struct lcd_dma_info {
 	spinlock_t lock;
@@ -795,7 +1112,7 @@ static void set_b1_regs(void)
 	/* Always set the source port as SDRAM for now*/
 	w &= ~(0x03 << 6);
 	if (lcd_dma.callback != NULL)
-		w |= 1 << 1;            /* Block interrupt enable */
+		w |= 1 << 1;		/* Block interrupt enable */
 	else
 		w &= ~(1 << 1);
 	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
@@ -814,7 +1131,8 @@ static void set_b1_regs(void)
 	omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L);
 }
 
-static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id,
+				       struct pt_regs *regs)
 {
 	u16 w;
 
@@ -870,7 +1188,8 @@ void omap_free_lcd_dma(void)
 		return;
 	}
 	if (!enable_1510_mode)
-		omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1, OMAP1610_DMA_LCD_CCR);
+		omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1,
+			    OMAP1610_DMA_LCD_CCR);
 	lcd_dma.reserved = 0;
 	spin_unlock(&lcd_dma.lock);
 }
@@ -939,93 +1258,24 @@ void omap_stop_lcd_dma(void)
 	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
 }
 
-/*
- * Clears any DMA state so the DMA engine is ready to restart with new buffers
- * through omap_start_dma(). Any buffers in flight are discarded.
- */
-void omap_clear_dma(int lch)
-{
-	unsigned long flags;
-	int status;
-
-	local_irq_save(flags);
-	omap_writew(omap_readw(OMAP_DMA_CCR(lch)) & ~OMAP_DMA_CCR_EN,
-		    OMAP_DMA_CCR(lch));
-	status = OMAP_DMA_CSR(lch);	/* clear pending interrupts */
-	local_irq_restore(flags);
-}
-
-/*
- * Returns current physical source address for the given DMA channel.
- * If the channel is running the caller must disable interrupts prior calling
- * this function and process the returned value before re-enabling interrupt to
- * prevent races with the interrupt handler. Note that in continuous mode there
- * is a chance for CSSA_L register overflow inbetween the two reads resulting
- * in incorrect return value.
- */
-dma_addr_t omap_get_dma_src_pos(int lch)
-{
-	return (dma_addr_t) (omap_readw(OMAP_DMA_CSSA_L(lch)) |
-	(omap_readw(OMAP_DMA_CSSA_U(lch)) << 16));
-}
-
-/*
- * Returns current physical destination address for the given DMA channel.
- * If the channel is running the caller must disable interrupts prior calling
- * this function and process the returned value before re-enabling interrupt to
- * prevent races with the interrupt handler. Note that in continuous mode there
- * is a chance for CDSA_L register overflow inbetween the two reads resulting
- * in incorrect return value.
- */
-dma_addr_t omap_get_dma_dst_pos(int lch)
-{
-	return (dma_addr_t) (omap_readw(OMAP_DMA_CDSA_L(lch)) |
-	(omap_readw(OMAP_DMA_CDSA_U(lch)) << 16));
-}
-
-/*
- * Returns current source transfer counting for the given DMA channel.
- * Can be used to monitor the progress of a transfer inside a  block.
- * It must be called with disabled interrupts.
- */
-int omap_get_dma_src_addr_counter(int lch)
-{
-	return (dma_addr_t) omap_readw(OMAP_DMA_CSAC(lch));
-}
-
-int omap_dma_running(void)
-{
-	int lch;
-
-	/* Check if LCD DMA is running */
-	if (cpu_is_omap16xx())
-		if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)
-			return 1;
-
-	for (lch = 0; lch < dma_chan_count; lch++) {
-		u16 w;
-
-		w = omap_readw(OMAP_DMA_CCR(lch));
-		if (w & OMAP_DMA_CCR_EN)
-			return 1;
-	}
-	return 0;
-}
+/*----------------------------------------------------------------------------*/
 
 static int __init omap_init_dma(void)
 {
 	int ch, r;
 
-	if (cpu_is_omap1510()) {
-		printk(KERN_INFO "DMA support for OMAP1510 initialized\n");
+	if (cpu_is_omap15xx()) {
+		printk(KERN_INFO "DMA support for OMAP15xx initialized\n");
 		dma_chan_count = 9;
 		enable_1510_mode = 1;
 	} else if (cpu_is_omap16xx() || cpu_is_omap730()) {
 		printk(KERN_INFO "OMAP DMA hardware version %d\n",
 		       omap_readw(OMAP_DMA_HW_ID));
 		printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n",
-		       (omap_readw(OMAP_DMA_CAPS_0_U) << 16) | omap_readw(OMAP_DMA_CAPS_0_L),
-		       (omap_readw(OMAP_DMA_CAPS_1_U) << 16) | omap_readw(OMAP_DMA_CAPS_1_L),
+		       (omap_readw(OMAP_DMA_CAPS_0_U) << 16) |
+		       omap_readw(OMAP_DMA_CAPS_0_L),
+		       (omap_readw(OMAP_DMA_CAPS_1_U) << 16) |
+		       omap_readw(OMAP_DMA_CAPS_1_L),
 		       omap_readw(OMAP_DMA_CAPS_2), omap_readw(OMAP_DMA_CAPS_3),
 		       omap_readw(OMAP_DMA_CAPS_4));
 		if (!enable_1510_mode) {
@@ -1038,6 +1288,11 @@ static int __init omap_init_dma(void)
 			dma_chan_count = 16;
 		} else
 			dma_chan_count = 9;
+	} else if (cpu_is_omap24xx()) {
+		u8 revision = omap_readb(OMAP_DMA4_REVISION);
+		printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
+		       revision >> 4, revision & 0xf);
+		dma_chan_count = OMAP_LOGICAL_DMA_CH_COUNT;
 	} else {
 		dma_chan_count = 0;
 		return 0;
@@ -1049,41 +1304,56 @@ static int __init omap_init_dma(void)
 	memset(&dma_chan, 0, sizeof(dma_chan));
 
 	for (ch = 0; ch < dma_chan_count; ch++) {
+		omap_clear_dma(ch);
 		dma_chan[ch].dev_id = -1;
 		dma_chan[ch].next_lch = -1;
 
 		if (ch >= 6 && enable_1510_mode)
 			continue;
 
-		/* request_irq() doesn't like dev_id (ie. ch) being zero,
-		 * so we have to kludge around this. */
-		r = request_irq(dma_irq[ch], dma_irq_handler, 0, "DMA",
-				(void *) (ch + 1));
+		if (cpu_class_is_omap1()) {
+			/* request_irq() doesn't like dev_id (ie. ch) being
+			 * zero, so we have to kludge around this. */
+			r = request_irq(omap1_dma_irq[ch],
+					omap1_dma_irq_handler, 0, "DMA",
+					(void *) (ch + 1));
+			if (r != 0) {
+				int i;
+
+				printk(KERN_ERR "unable to request IRQ %d "
+				       "for DMA (error %d)\n",
+				       omap1_dma_irq[ch], r);
+				for (i = 0; i < ch; i++)
+					free_irq(omap1_dma_irq[i],
+						 (void *) (i + 1));
+				return r;
+			}
+		}
+	}
+
+	if (cpu_is_omap24xx())
+		setup_irq(INT_24XX_SDMA_IRQ0, &omap24xx_dma_irq);
+
+	/* FIXME: Update LCD DMA to work on 24xx */
+	if (cpu_class_is_omap1()) {
+		r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
+				"LCD DMA", NULL);
 		if (r != 0) {
 			int i;
 
-			printk(KERN_ERR "unable to request IRQ %d for DMA (error %d)\n",
-			       dma_irq[ch], r);
-			for (i = 0; i < ch; i++)
-				free_irq(dma_irq[i], (void *) (i + 1));
+			printk(KERN_ERR "unable to request IRQ for LCD DMA "
+			       "(error %d)\n", r);
+			for (i = 0; i < dma_chan_count; i++)
+				free_irq(omap1_dma_irq[i], (void *) (i + 1));
 			return r;
 		}
 	}
-	r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0, "LCD DMA", NULL);
-	if (r != 0) {
-		int i;
 
-		printk(KERN_ERR "unable to request IRQ for LCD DMA (error %d)\n", r);
-		for (i = 0; i < dma_chan_count; i++)
-			free_irq(dma_irq[i], (void *) (i + 1));
-		return r;
-	}
 	return 0;
 }
 
 arch_initcall(omap_init_dma);
 
-
 EXPORT_SYMBOL(omap_get_dma_src_pos);
 EXPORT_SYMBOL(omap_get_dma_dst_pos);
 EXPORT_SYMBOL(omap_get_dma_src_addr_counter);
@@ -1109,6 +1379,8 @@ EXPORT_SYMBOL(omap_set_dma_dest_index);
 EXPORT_SYMBOL(omap_set_dma_dest_data_pack);
 EXPORT_SYMBOL(omap_set_dma_dest_burst_mode);
 
+EXPORT_SYMBOL(omap_set_dma_params);
+
 EXPORT_SYMBOL(omap_dma_link_lch);
 EXPORT_SYMBOL(omap_dma_unlink_lch);
 
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index a1468d7326eb..38d7ebf87920 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -26,7 +26,7 @@
  */
 
 #include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
 #include <asm/arch/dmtimer.h>
 #include <asm/io.h>
 #include <asm/arch/irqs.h>
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 55059a24ad41..76f721d85137 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -140,7 +140,7 @@ static struct gpio_bank gpio_bank_1610[5] = {
 };
 #endif
 
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 static struct gpio_bank gpio_bank_1510[2] = {
 	{ OMAP_MPUIO_BASE,    INT_MPUIO,      IH_MPUIO_BASE, METHOD_MPUIO },
 	{ OMAP1510_GPIO_BASE, INT_GPIO_BANK1, IH_GPIO_BASE,  METHOD_GPIO_1510 }
@@ -173,7 +173,7 @@ static int gpio_bank_count;
 
 static inline struct gpio_bank *get_gpio_bank(int gpio)
 {
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		if (OMAP_GPIO_IS_MPUIO(gpio))
 			return &gpio_bank[0];
@@ -222,7 +222,7 @@ static inline int gpio_valid(int gpio)
 			return -1;
 		return 0;
 	}
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510() && gpio < 16)
 		return 0;
 #endif
@@ -654,7 +654,7 @@ int omap_request_gpio(int gpio)
 	/* Set trigger to none. You need to enable the trigger after request_irq */
 	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE);
 
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 	if (bank->method == METHOD_GPIO_1510) {
 		void __iomem *reg;
 
@@ -739,7 +739,7 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc,
 	bank = (struct gpio_bank *) desc->data;
 	if (bank->method == METHOD_MPUIO)
 		isr_reg = bank->base + OMAP_MPUIO_GPIO_INT;
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 	if (bank->method == METHOD_GPIO_1510)
 		isr_reg = bank->base + OMAP1510_GPIO_INT_STATUS;
 #endif
@@ -774,7 +774,7 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc,
 			d = irq_desc + gpio_irq;
 			desc_handle_irq(gpio_irq, d, regs);
 		}
-        }
+	}
 }
 
 static void gpio_ack_irq(unsigned int irq)
@@ -837,8 +837,9 @@ static struct irqchip mpuio_irq_chip = {
 	.unmask = mpuio_unmask_irq
 };
 
-static int initialized = 0;
-static struct clk * gpio_ck = NULL;
+static int initialized;
+static struct clk * gpio_ick;
+static struct clk * gpio_fck;
 
 static int __init _omap_gpio_init(void)
 {
@@ -848,14 +849,26 @@ static int __init _omap_gpio_init(void)
 	initialized = 1;
 
 	if (cpu_is_omap1510()) {
-		gpio_ck = clk_get(NULL, "arm_gpio_ck");
-		if (IS_ERR(gpio_ck))
+		gpio_ick = clk_get(NULL, "arm_gpio_ck");
+		if (IS_ERR(gpio_ick))
 			printk("Could not get arm_gpio_ck\n");
 		else
-			clk_use(gpio_ck);
+			clk_use(gpio_ick);
+	}
+	if (cpu_is_omap24xx()) {
+		gpio_ick = clk_get(NULL, "gpios_ick");
+		if (IS_ERR(gpio_ick))
+			printk("Could not get gpios_ick\n");
+		else
+			clk_use(gpio_ick);
+		gpio_fck = clk_get(NULL, "gpios_fck");
+		if (IS_ERR(gpio_ick))
+			printk("Could not get gpios_fck\n");
+		else
+			clk_use(gpio_fck);
 	}
 
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		printk(KERN_INFO "OMAP1510 GPIO hardware\n");
 		gpio_bank_count = 2;
@@ -901,7 +914,7 @@ static int __init _omap_gpio_init(void)
 		if (bank->method == METHOD_MPUIO) {
 			omap_writew(0xFFFF, OMAP_MPUIO_BASE + OMAP_MPUIO_GPIO_MASKIT);
 		}
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 		if (bank->method == METHOD_GPIO_1510) {
 			__raw_writew(0xffff, bank->base + OMAP1510_GPIO_INT_MASK);
 			__raw_writew(0x0000, bank->base + OMAP1510_GPIO_INT_STATUS);
@@ -1038,6 +1051,7 @@ static struct sys_device omap_gpio_device = {
 
 /*
  * This may get called early from board specific init
+ * for boards that have interrupts routed via FPGA.
  */
 int omap_gpio_init(void)
 {
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 9c9b7df3faf6..ea9475c86656 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -491,17 +491,20 @@ int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int leng
 	omap_set_dma_transfer_params(mcbsp[id].dma_tx_lch,
 				     OMAP_DMA_DATA_TYPE_S16,
 				     length >> 1, 1,
-				     OMAP_DMA_SYNC_ELEMENT);
+				     OMAP_DMA_SYNC_ELEMENT,
+				     0, 0);
 
 	omap_set_dma_dest_params(mcbsp[id].dma_tx_lch,
 				 OMAP_DMA_PORT_TIPB,
 				 OMAP_DMA_AMODE_CONSTANT,
-				 mcbsp[id].io_base + OMAP_MCBSP_REG_DXR1);
+				 mcbsp[id].io_base + OMAP_MCBSP_REG_DXR1,
+				 0, 0);
 
 	omap_set_dma_src_params(mcbsp[id].dma_tx_lch,
 				OMAP_DMA_PORT_EMIFF,
 				OMAP_DMA_AMODE_POST_INC,
-				buffer);
+				buffer,
+				0, 0);
 
 	omap_start_dma(mcbsp[id].dma_tx_lch);
 	wait_for_completion(&(mcbsp[id].tx_dma_completion));
@@ -531,17 +534,20 @@ int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int leng
 	omap_set_dma_transfer_params(mcbsp[id].dma_rx_lch,
 				     OMAP_DMA_DATA_TYPE_S16,
 				     length >> 1, 1,
-				     OMAP_DMA_SYNC_ELEMENT);
+				     OMAP_DMA_SYNC_ELEMENT,
+				     0, 0);
 
 	omap_set_dma_src_params(mcbsp[id].dma_rx_lch,
 				OMAP_DMA_PORT_TIPB,
 				OMAP_DMA_AMODE_CONSTANT,
-				mcbsp[id].io_base + OMAP_MCBSP_REG_DRR1);
+				mcbsp[id].io_base + OMAP_MCBSP_REG_DRR1,
+				0, 0);
 
 	omap_set_dma_dest_params(mcbsp[id].dma_rx_lch,
 				 OMAP_DMA_PORT_EMIFF,
 				 OMAP_DMA_AMODE_POST_INC,
-				 buffer);
+				 buffer,
+				 0, 0);
 
 	omap_start_dma(mcbsp[id].dma_rx_lch);
 	wait_for_completion(&(mcbsp[id].rx_dma_completion));
@@ -643,7 +649,7 @@ static const struct omap_mcbsp_info mcbsp_730[] = {
 };
 #endif
 
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 static const struct omap_mcbsp_info mcbsp_1510[] = {
 	[0] = { .virt_base = OMAP1510_MCBSP1_BASE,
 		.dma_rx_sync = OMAP_DMA_MCBSP1_RX,
@@ -712,7 +718,7 @@ static int __init omap_mcbsp_init(void)
 		mcbsp_count = ARRAY_SIZE(mcbsp_730);
 	}
 #endif
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		mcbsp_info = mcbsp_1510;
 		mcbsp_count = ARRAY_SIZE(mcbsp_1510);
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 64482040f89e..8c1c016aa689 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -3,7 +3,7 @@
  *
  * Utility to set the Omap MUX and PULL_DWN registers from a table in mux.h
  *
- * Copyright (C) 2003 Nokia Corporation
+ * Copyright (C) 2003 - 2005 Nokia Corporation
  *
  * Written by Tony Lindgren <tony.lindgren@nokia.com>
  *
@@ -25,38 +25,74 @@
 #include <linux/config.h>
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/kernel.h>
 #include <asm/system.h>
 #include <asm/io.h>
 #include <linux/spinlock.h>
-
-#define __MUX_C__
 #include <asm/arch/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 
+#define OMAP24XX_L4_BASE	0x48000000
+#define OMAP24XX_PULL_ENA	(1 << 3)
+#define OMAP24XX_PULL_UP	(1 << 4)
+
+static struct pin_config * pin_table;
+static unsigned long pin_table_sz;
+
+extern struct pin_config * omap730_pins;
+extern struct pin_config * omap1xxx_pins;
+extern struct pin_config * omap24xx_pins;
+
+int __init omap_mux_register(struct pin_config * pins, unsigned long size)
+{
+	pin_table = pins;
+	pin_table_sz = size;
+
+	return 0;
+}
+
 /*
  * Sets the Omap MUX and PULL_DWN registers based on the table
  */
-int __init_or_module
-omap_cfg_reg(const reg_cfg_t reg_cfg)
+int __init_or_module omap_cfg_reg(const unsigned long index)
 {
 	static DEFINE_SPINLOCK(mux_spin_lock);
 
 	unsigned long flags;
-	reg_cfg_set *cfg;
+	struct pin_config *cfg;
 	unsigned int reg_orig = 0, reg = 0, pu_pd_orig = 0, pu_pd = 0,
 		pull_orig = 0, pull = 0;
 	unsigned int mask, warn = 0;
 
-	if (cpu_is_omap7xx())
-		return 0;
+	if (!pin_table)
+		BUG();
 
-	if (reg_cfg > ARRAY_SIZE(reg_cfg_table)) {
-		printk(KERN_ERR "MUX: reg_cfg %d\n", reg_cfg);
-		return -EINVAL;
+	if (index >= pin_table_sz) {
+		printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
+		       index, pin_table_sz);
+		dump_stack();
+		return -ENODEV;
 	}
 
-	cfg = (reg_cfg_set *)&reg_cfg_table[reg_cfg];
+	cfg = (struct pin_config *)&pin_table[index];
+	if (cpu_is_omap24xx()) {
+		u8 reg = 0;
+
+		reg |= cfg->mask & 0x7;
+		if (cfg->pull_val)
+			reg |= OMAP24XX_PULL_ENA;
+		if(cfg->pu_pd_val)
+			reg |= OMAP24XX_PULL_UP;
+#ifdef CONFIG_OMAP_MUX_DEBUG
+		printk("Muxing %s (0x%08x): 0x%02x -> 0x%02x\n",
+		       cfg->name, OMAP24XX_L4_BASE + cfg->mux_reg,
+		       omap_readb(OMAP24XX_L4_BASE + cfg->mux_reg), reg);
+#endif
+		omap_writeb(reg, OMAP24XX_L4_BASE + cfg->mux_reg);
+
+		return 0;
+	}
 
 	/* Check the mux register in question */
 	if (cfg->mux_reg) {
@@ -157,7 +193,8 @@ omap_cfg_reg(const reg_cfg_t reg_cfg)
 	return 0;
 #endif
 }
-
 EXPORT_SYMBOL(omap_cfg_reg);
-
+#else
+#define omap_mux_init() do {} while(0)
+#define omap_cfg_reg(x)	do {} while(0)
 #endif	/* CONFIG_OMAP_MUX */
diff --git a/arch/arm/plat-omap/ocpi.c b/arch/arm/plat-omap/ocpi.c
index 1fb16f9edfd5..b86148227480 100644
--- a/arch/arm/plat-omap/ocpi.c
+++ b/arch/arm/plat-omap/ocpi.c
@@ -25,7 +25,6 @@
 
 #include <linux/config.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/kernel.h>
@@ -35,7 +34,7 @@
 
 #include <asm/io.h>
 #include <asm/hardware/clock.h>
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
 
 #define OCPI_BASE		0xfffec320
 #define OCPI_FAULT		(OCPI_BASE + 0x00)
diff --git a/arch/arm/plat-omap/pm.c b/arch/arm/plat-omap/pm.c
index e15c6c1ddec9..1a24e2c10714 100644
--- a/arch/arm/plat-omap/pm.c
+++ b/arch/arm/plat-omap/pm.c
@@ -54,11 +54,12 @@
 #include <asm/arch/tps65010.h>
 #include <asm/arch/dsp_common.h>
 
-#include "clock.h"
-#include "sram.h"
+#include <asm/arch/clock.h>
+#include <asm/arch/sram.h>
 
 static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
 static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE];
+static unsigned int mpui730_sleep_save[MPUI730_SLEEP_SAVE_SIZE];
 static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE];
 static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
 
@@ -120,8 +121,8 @@ void omap_pm_idle(void)
  */
 static void omap_pm_wakeup_setup(void)
 {
-	u32 level1_wake = OMAP_IRQ_BIT(INT_IH2_IRQ);
-	u32 level2_wake = OMAP_IRQ_BIT(INT_UART2) | OMAP_IRQ_BIT(INT_KEYBOARD);
+	u32 level1_wake = 0;
+	u32 level2_wake = OMAP_IRQ_BIT(INT_UART2);
 
 	/*
 	 * Turn off all interrupts except GPIO bank 1, L1-2nd level cascade,
@@ -129,19 +130,29 @@ static void omap_pm_wakeup_setup(void)
 	 * drivers must still separately call omap_set_gpio_wakeup() to
 	 * wake up to a GPIO interrupt.
 	 */
-	if (cpu_is_omap1510() || cpu_is_omap16xx())
-		level1_wake |= OMAP_IRQ_BIT(INT_GPIO_BANK1);
-	else if (cpu_is_omap730())
-		level1_wake |= OMAP_IRQ_BIT(INT_730_GPIO_BANK1);
+	if (cpu_is_omap730())
+		level1_wake = OMAP_IRQ_BIT(INT_730_GPIO_BANK1) |
+			OMAP_IRQ_BIT(INT_730_IH2_IRQ);
+	else if (cpu_is_omap1510())
+		level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
+			OMAP_IRQ_BIT(INT_1510_IH2_IRQ);
+	else if (cpu_is_omap16xx())
+		level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
+			OMAP_IRQ_BIT(INT_1610_IH2_IRQ);
 
 	omap_writel(~level1_wake, OMAP_IH1_MIR);
 
-	if (cpu_is_omap1510())
+	if (cpu_is_omap730()) {
+		omap_writel(~level2_wake, OMAP_IH2_0_MIR);
+		omap_writel(~(OMAP_IRQ_BIT(INT_730_WAKE_UP_REQ) | OMAP_IRQ_BIT(INT_730_MPUIO_KEYPAD)), OMAP_IH2_1_MIR);
+	} else if (cpu_is_omap1510()) {
+		level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
 		omap_writel(~level2_wake,  OMAP_IH2_MIR);
-
-	/* INT_1610_WAKE_UP_REQ is needed for GPIO wakeup... */
-	if (cpu_is_omap16xx()) {
+	} else if (cpu_is_omap16xx()) {
+		level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
 		omap_writel(~level2_wake, OMAP_IH2_0_MIR);
+
+		/* INT_1610_WAKE_UP_REQ is needed for GPIO wakeup... */
 		omap_writel(~OMAP_IRQ_BIT(INT_1610_WAKE_UP_REQ), OMAP_IH2_1_MIR);
 		omap_writel(~0x0, OMAP_IH2_2_MIR);
 		omap_writel(~0x0, OMAP_IH2_3_MIR);
@@ -185,7 +196,17 @@ void omap_pm_suspend(void)
  	 * Save interrupt, MPUI, ARM and UPLD control registers.
 	 */
 
-	if (cpu_is_omap1510()) {
+	if (cpu_is_omap730()) {
+		MPUI730_SAVE(OMAP_IH1_MIR);
+		MPUI730_SAVE(OMAP_IH2_0_MIR);
+		MPUI730_SAVE(OMAP_IH2_1_MIR);
+		MPUI730_SAVE(MPUI_CTRL);
+		MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG);
+		MPUI730_SAVE(MPUI_DSP_API_CONFIG);
+		MPUI730_SAVE(EMIFS_CONFIG);
+		MPUI730_SAVE(EMIFF_SDRAM_CONFIG);
+
+	} else if (cpu_is_omap1510()) {
 		MPUI1510_SAVE(OMAP_IH1_MIR);
 		MPUI1510_SAVE(OMAP_IH2_MIR);
 		MPUI1510_SAVE(MPUI_CTRL);
@@ -280,7 +301,13 @@ void omap_pm_suspend(void)
 	ULPD_RESTORE(ULPD_CLOCK_CTRL);
 	ULPD_RESTORE(ULPD_STATUS_REQ);
 
-	if (cpu_is_omap1510()) {
+	if (cpu_is_omap730()) {
+		MPUI730_RESTORE(EMIFS_CONFIG);
+		MPUI730_RESTORE(EMIFF_SDRAM_CONFIG);
+		MPUI730_RESTORE(OMAP_IH1_MIR);
+		MPUI730_RESTORE(OMAP_IH2_0_MIR);
+		MPUI730_RESTORE(OMAP_IH2_1_MIR);
+	} else if (cpu_is_omap1510()) {
 		MPUI1510_RESTORE(MPUI_CTRL);
 		MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG);
 		MPUI1510_RESTORE(MPUI_DSP_API_CONFIG);
@@ -355,7 +382,14 @@ static int omap_pm_read_proc(
 	ULPD_SAVE(ULPD_DPLL_CTRL);
 	ULPD_SAVE(ULPD_POWER_CTRL);
 
-	if (cpu_is_omap1510()) {
+	if (cpu_is_omap730()) {
+		MPUI730_SAVE(MPUI_CTRL);
+		MPUI730_SAVE(MPUI_DSP_STATUS);
+		MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG);
+		MPUI730_SAVE(MPUI_DSP_API_CONFIG);
+		MPUI730_SAVE(EMIFF_SDRAM_CONFIG);
+		MPUI730_SAVE(EMIFS_CONFIG);
+	} else if (cpu_is_omap1510()) {
 		MPUI1510_SAVE(MPUI_CTRL);
 		MPUI1510_SAVE(MPUI_DSP_STATUS);
 		MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG);
@@ -404,7 +438,21 @@ static int omap_pm_read_proc(
 		   ULPD_SHOW(ULPD_STATUS_REQ),
 		   ULPD_SHOW(ULPD_POWER_CTRL));
 
-		if (cpu_is_omap1510()) {
+		if (cpu_is_omap730()) {
+			my_buffer_offset += sprintf(my_base + my_buffer_offset,
+			   "MPUI730_CTRL_REG	     0x%-8x \n"
+			   "MPUI730_DSP_STATUS_REG:      0x%-8x \n"
+			   "MPUI730_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
+	 "MPUI730_DSP_API_CONFIG_REG:  0x%-8x \n"
+	 "MPUI730_SDRAM_CONFIG_REG:    0x%-8x \n"
+	 "MPUI730_EMIFS_CONFIG_REG:    0x%-8x \n",
+	 MPUI730_SHOW(MPUI_CTRL),
+	 MPUI730_SHOW(MPUI_DSP_STATUS),
+	 MPUI730_SHOW(MPUI_DSP_BOOT_CONFIG),
+	 MPUI730_SHOW(MPUI_DSP_API_CONFIG),
+	 MPUI730_SHOW(EMIFF_SDRAM_CONFIG),
+	 MPUI730_SHOW(EMIFS_CONFIG));
+		} else if (cpu_is_omap1510()) {
 			my_buffer_offset += sprintf(my_base + my_buffer_offset,
 			   "MPUI1510_CTRL_REG             0x%-8x \n"
 			   "MPUI1510_DSP_STATUS_REG:      0x%-8x \n"
@@ -461,7 +509,7 @@ static void omap_pm_init_proc(void)
  *	@state:		suspend state we're entering.
  *
  */
-//#include <asm/arch/hardware.h>
+//#include <asm/hardware.h>
 
 static int omap_pm_prepare(suspend_state_t state)
 {
@@ -553,7 +601,12 @@ static int __init omap_pm_init(void)
 	 * These routines need to be in SRAM as that's the only
 	 * memory the MPU can see when it wakes up.
 	 */
-	if (cpu_is_omap1510()) {
+	if (cpu_is_omap730()) {
+		omap_sram_idle = omap_sram_push(omap730_idle_loop_suspend,
+						omap730_idle_loop_suspend_sz);
+		omap_sram_suspend = omap_sram_push(omap730_cpu_suspend,
+	 omap730_cpu_suspend_sz);
+	} else if (cpu_is_omap1510()) {
 		omap_sram_idle = omap_sram_push(omap1510_idle_loop_suspend,
 						omap1510_idle_loop_suspend_sz);
 		omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend,
@@ -572,7 +625,11 @@ static int __init omap_pm_init(void)
 
 	pm_idle = omap_pm_idle;
 
-	setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq);
+	if (cpu_is_omap730())
+		setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq);
+	else if (cpu_is_omap16xx())
+		setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq);
+
 #if 0
 	/* --- BEGIN BOARD-DEPENDENT CODE --- */
 	/* Sleepx mask direction */
@@ -591,7 +648,9 @@ static int __init omap_pm_init(void)
 	omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL);
 
 	/* Configure IDLECT3 */
-	if (cpu_is_omap16xx())
+	if (cpu_is_omap730())
+		omap_writel(OMAP730_IDLECT3_VAL, OMAP730_IDLECT3);
+	else if (cpu_is_omap16xx())
 		omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3);
 
 	pm_set_ops(&omap_pm_ops);
@@ -600,8 +659,10 @@ static int __init omap_pm_init(void)
 	omap_pm_init_proc();
 #endif
 
-	/* configure LOW_PWR pin */
-	omap_cfg_reg(T20_1610_LOW_PWR);
+	if (cpu_is_omap16xx()) {
+		/* configure LOW_PWR pin */
+		omap_cfg_reg(T20_1610_LOW_PWR);
+	}
 
 	return 0;
 }
diff --git a/arch/arm/plat-omap/sleep.S b/arch/arm/plat-omap/sleep.S
index 9f745836f6aa..4cd7d292f854 100644
--- a/arch/arm/plat-omap/sleep.S
+++ b/arch/arm/plat-omap/sleep.S
@@ -1,7 +1,7 @@
 /*
  * linux/arch/arm/plat-omap/sleep.S
  *
- * Low-level OMAP1510/1610 sleep/wakeUp support
+ * Low-level OMAP730/1510/1610 sleep/wakeUp support
  *
  * Initial SA1110 code:
  * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
@@ -52,7 +52,57 @@
  *       processor specific functions here.
  */
 
-#ifdef CONFIG_ARCH_OMAP1510
+#if defined(CONFIG_ARCH_OMAP730)
+ENTRY(omap730_idle_loop_suspend)
+
+	stmfd	sp!, {r0 - r12, lr}		@ save registers on stack
+
+	@ load base address of ARM_IDLECT1 and ARM_IDLECT2
+	mov	r4, #CLKGEN_REG_ASM_BASE & 0xff000000
+	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000
+	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00
+
+	@ turn off clock domains
+	@ get ARM_IDLECT2 into r2
+	ldrh	r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
+	mov	r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff
+	orr	r5, r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff00
+	strh	r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
+
+	@ request ARM idle
+	@ get ARM_IDLECT1 into r1
+	ldrh	r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
+	orr	r3, r1, #OMAP730_IDLE_LOOP_REQUEST & 0xffff
+	strh	r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
+
+	mov	r5, #IDLE_WAIT_CYCLES & 0xff
+	orr	r5, r5, #IDLE_WAIT_CYCLES & 0xff00
+l_730:	subs	r5, r5, #1
+	bne	l_730
+/*
+ * Let's wait for the next clock tick to wake us up.
+ */
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c0, 4		@ wait for interrupt
+/*
+ * omap730_idle_loop_suspend()'s resume point.
+ *
+ * It will just start executing here, so we'll restore stuff from the
+ * stack, reset the ARM_IDLECT1 and ARM_IDLECT2.
+ */
+
+	@ restore ARM_IDLECT1 and ARM_IDLECT2 and return
+	@ r1 has ARM_IDLECT1 and r2 still has ARM_IDLECT2
+	strh	r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
+	strh	r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
+
+	ldmfd	sp!, {r0 - r12, pc}		@ restore regs and return
+
+ENTRY(omap730_idle_loop_suspend_sz)
+	.word	. - omap730_idle_loop_suspend
+#endif /* CONFIG_ARCH_OMAP730 */
+
+#ifdef CONFIG_ARCH_OMAP15XX
 ENTRY(omap1510_idle_loop_suspend)
 
 	stmfd	sp!, {r0 - r12, lr}		@ save registers on stack
@@ -100,7 +150,7 @@ l_1510:	subs	r5, r5, #1
 
 ENTRY(omap1510_idle_loop_suspend_sz)
 	.word	. - omap1510_idle_loop_suspend
-#endif /* CONFIG_ARCH_OMAP1510 */
+#endif /* CONFIG_ARCH_OMAP15XX */
 
 #if defined(CONFIG_ARCH_OMAP16XX)
 ENTRY(omap1610_idle_loop_suspend)
@@ -169,7 +219,86 @@ ENTRY(omap1610_idle_loop_suspend_sz)
  *
  */
 
-#ifdef CONFIG_ARCH_OMAP1510
+#if defined(CONFIG_ARCH_OMAP730)
+ENTRY(omap730_cpu_suspend)
+
+	@ save registers on stack
+	stmfd	sp!, {r0 - r12, lr}
+
+	@ Drain write cache
+	mov	r4, #0
+	mcr	p15, 0, r0, c7, c10, 4
+	nop
+
+	@ load base address of Traffic Controller
+	mov	r6, #TCMIF_ASM_BASE & 0xff000000
+	orr	r6, r6, #TCMIF_ASM_BASE & 0x00ff0000
+	orr	r6, r6, #TCMIF_ASM_BASE & 0x0000ff00
+
+	@ prepare to put SDRAM into self-refresh manually
+	ldr	r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
+	orr	r9, r7, #SELF_REFRESH_MODE & 0xff000000
+	orr	r9, r9, #SELF_REFRESH_MODE & 0x000000ff
+	str	r9, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
+
+	@ prepare to put EMIFS to Sleep
+	ldr	r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
+	orr	r9, r8, #IDLE_EMIFS_REQUEST & 0xff
+	str	r9, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
+
+	@ load base address of ARM_IDLECT1 and ARM_IDLECT2
+	mov	r4, #CLKGEN_REG_ASM_BASE & 0xff000000
+	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000
+	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00
+
+	@ turn off clock domains
+	@ do not disable PERCK (0x04)
+	mov	r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff
+	orr	r5, r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff00
+	strh	r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
+
+	@ request ARM idle
+	mov	r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff
+	orr	r3, r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff00
+	strh	r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
+
+	@ disable instruction cache
+	mrc	p15, 0, r9, c1, c0, 0
+	bic	r2, r9, #0x1000
+	mcr	p15, 0, r2, c1, c0, 0
+	nop
+
+/*
+ * Let's wait for the next wake up event to wake us up. r0 can't be
+ * used here because r0 holds ARM_IDLECT1
+ */
+	mov	r2, #0
+	mcr	p15, 0, r2, c7, c0, 4		@ wait for interrupt
+/*
+ * omap730_cpu_suspend()'s resume point.
+ *
+ * It will just start executing here, so we'll restore stuff from the
+ * stack.
+ */
+	@ re-enable Icache
+	mcr	p15, 0, r9, c1, c0, 0
+
+	@ reset the ARM_IDLECT1 and ARM_IDLECT2.
+	strh	r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
+	strh	r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
+
+	@ Restore EMIFF controls
+	str	r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
+	str	r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
+
+	@ restore regs and return
+	ldmfd	sp!, {r0 - r12, pc}
+
+ENTRY(omap730_cpu_suspend_sz)
+	.word	. - omap730_cpu_suspend
+#endif /* CONFIG_ARCH_OMAP730 */
+
+#ifdef CONFIG_ARCH_OMAP15XX
 ENTRY(omap1510_cpu_suspend)
 
 	@ save registers on stack
@@ -241,7 +370,7 @@ l_1510_2:
 
 ENTRY(omap1510_cpu_suspend_sz)
 	.word	. - omap1510_cpu_suspend
-#endif /* CONFIG_ARCH_OMAP1510 */
+#endif /* CONFIG_ARCH_OMAP15XX */
 
 #if defined(CONFIG_ARCH_OMAP16XX)
 ENTRY(omap1610_cpu_suspend)
diff --git a/arch/arm/plat-omap/sram-fn.S b/arch/arm/plat-omap/sram-fn.S
index 4bea36964a00..66414cc8e6e3 100644
--- a/arch/arm/plat-omap/sram-fn.S
+++ b/arch/arm/plat-omap/sram-fn.S
@@ -12,7 +12,7 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/arch/io.h>
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
 
 	.text
 
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 7719a4062e3a..792f66375830 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -20,10 +20,13 @@
 #include <asm/io.h>
 #include <asm/cacheflush.h>
 
-#include "sram.h"
+#include <asm/arch/sram.h>
+
+#define OMAP1_SRAM_PA		0x20000000
+#define OMAP1_SRAM_VA		0xd0000000
+#define OMAP2_SRAM_PA		0x40200000
+#define OMAP2_SRAM_VA		0xd0000000
 
-#define OMAP1_SRAM_BASE		0xd0000000
-#define OMAP1_SRAM_START	0x20000000
 #define SRAM_BOOTLOADER_SZ	0x80
 
 static unsigned long omap_sram_base;
@@ -31,35 +34,42 @@ static unsigned long omap_sram_size;
 static unsigned long omap_sram_ceil;
 
 /*
- * The amount of SRAM depends on the core type:
- * 730 = 200K, 1510 = 512K, 5912 = 256K, 1610 = 16K, 1710 = 16K
+ * The amount of SRAM depends on the core type.
  * Note that we cannot try to test for SRAM here because writes
  * to secure SRAM will hang the system. Also the SRAM is not
  * yet mapped at this point.
  */
 void __init omap_detect_sram(void)
 {
-	omap_sram_base = OMAP1_SRAM_BASE;
+	if (!cpu_is_omap24xx())
+		omap_sram_base = OMAP1_SRAM_VA;
+	else
+		omap_sram_base = OMAP2_SRAM_VA;
 
 	if (cpu_is_omap730())
-		omap_sram_size = 0x32000;
-	else if (cpu_is_omap1510())
-		omap_sram_size = 0x80000;
+		omap_sram_size = 0x32000;	/* 200K */
+	else if (cpu_is_omap15xx())
+		omap_sram_size = 0x30000;	/* 192K */
 	else if (cpu_is_omap1610() || cpu_is_omap1621() || cpu_is_omap1710())
-		omap_sram_size = 0x4000;
+		omap_sram_size = 0x4000;	/* 16K */
 	else if (cpu_is_omap1611())
-		omap_sram_size = 0x3e800;
+		omap_sram_size = 0x3e800;	/* 250K */
+	else if (cpu_is_omap2420())
+		omap_sram_size = 0xa0014;	/* 640K */
 	else {
 		printk(KERN_ERR "Could not detect SRAM size\n");
 		omap_sram_size = 0x4000;
 	}
 
-	printk(KERN_INFO "SRAM size: 0x%lx\n", omap_sram_size);
 	omap_sram_ceil = omap_sram_base + omap_sram_size;
 }
 
 static struct map_desc omap_sram_io_desc[] __initdata = {
-	{ OMAP1_SRAM_BASE, OMAP1_SRAM_START, 0, MT_DEVICE }
+	{	/* .length gets filled in at runtime */
+		.virtual	= OMAP1_SRAM_VA,
+		.pfn		= __phys_to_pfn(OMAP1_SRAM_PA),
+		.type		= MT_DEVICE
+	}
 };
 
 /*
@@ -72,10 +82,19 @@ void __init omap_map_sram(void)
 	if (omap_sram_size == 0)
 		return;
 
+	if (cpu_is_omap24xx()) {
+		omap_sram_io_desc[0].virtual = OMAP2_SRAM_VA;
+		omap_sram_io_desc[0].pfn = __phys_to_pfn(OMAP2_SRAM_PA);
+	}
+
 	omap_sram_io_desc[0].length = (omap_sram_size + PAGE_SIZE-1)/PAGE_SIZE;
 	omap_sram_io_desc[0].length *= PAGE_SIZE;
 	iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
 
+	printk(KERN_INFO "SRAM: Mapped pa 0x%08lx to va 0x%08lx size: 0x%lx\n",
+	       omap_sram_io_desc[0].pfn, omap_sram_io_desc[0].virtual,
+	       omap_sram_io_desc[0].length);
+
 	/*
 	 * Looks like we need to preserve some bootloader code at the
 	 * beginning of SRAM for jumping to flash for reboot to work...
@@ -84,16 +103,6 @@ void __init omap_map_sram(void)
 	       omap_sram_size - SRAM_BOOTLOADER_SZ);
 }
 
-static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl) = NULL;
-
-void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
-{
-	if (_omap_sram_reprogram_clock == NULL)
-		panic("Cannot use SRAM");
-
-	return _omap_sram_reprogram_clock(dpllctl, ckctl);
-}
-
 void * omap_sram_push(void * start, unsigned long size)
 {
 	if (size > (omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ))) {
@@ -107,10 +116,94 @@ void * omap_sram_push(void * start, unsigned long size)
 	return (void *)omap_sram_ceil;
 }
 
-void __init omap_sram_init(void)
+static void omap_sram_error(void)
+{
+	panic("Uninitialized SRAM function\n");
+}
+
+#ifdef CONFIG_ARCH_OMAP1
+
+static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl);
+
+void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
+{
+	if (!_omap_sram_reprogram_clock)
+		omap_sram_error();
+
+	return _omap_sram_reprogram_clock(dpllctl, ckctl);
+}
+
+int __init omap1_sram_init(void)
 {
-	omap_detect_sram();
-	omap_map_sram();
 	_omap_sram_reprogram_clock = omap_sram_push(sram_reprogram_clock,
 						    sram_reprogram_clock_sz);
+
+	return 0;
+}
+
+#else
+#define omap1_sram_init()	do {} while (0)
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2
+
+static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+			      u32 base_cs, u32 force_unlock);
+
+void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+		   u32 base_cs, u32 force_unlock)
+{
+	if (!_omap2_sram_ddr_init)
+		omap_sram_error();
+
+	return _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
+				    base_cs, force_unlock);
+}
+
+static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val,
+					  u32 mem_type);
+
+void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type)
+{
+	if (!_omap2_sram_reprogram_sdrc)
+		omap_sram_error();
+
+	return _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
+}
+
+static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
+
+u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
+{
+	if (!_omap2_set_prcm)
+		omap_sram_error();
+
+	return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass);
+}
+
+int __init omap2_sram_init(void)
+{
+	_omap2_sram_ddr_init = omap_sram_push(sram_ddr_init, sram_ddr_init_sz);
+
+	_omap2_sram_reprogram_sdrc = omap_sram_push(sram_reprogram_sdrc,
+						    sram_reprogram_sdrc_sz);
+	_omap2_set_prcm = omap_sram_push(sram_set_prcm, sram_set_prcm_sz);
+
+	return 0;
+}
+#else
+#define omap2_sram_init()	do {} while (0)
+#endif
+
+int __init omap_sram_init(void)
+{
+	omap_detect_sram();
+	omap_map_sram();
+
+	if (!cpu_is_omap24xx())
+		omap1_sram_init();
+	else
+		omap2_sram_init();
+
+	return 0;
 }
diff --git a/arch/arm/plat-omap/sram.h b/arch/arm/plat-omap/sram.h
deleted file mode 100644
index 71984efa6ae8..000000000000
--- a/arch/arm/plat-omap/sram.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * linux/arch/arm/plat-omap/sram.h
- *
- * Interface for functions that need to be run in internal SRAM
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_OMAP_SRAM_H
-#define __ARCH_ARM_OMAP_SRAM_H
-
-extern void * omap_sram_push(void * start, unsigned long size);
-extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
-
-/* Do not use these */
-extern void sram_reprogram_clock(u32 ckctl, u32 dpllctl);
-extern unsigned long sram_reprogram_clock_sz;
-
-#endif
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index 98f1c76f8660..00afc7a8c2ab 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -26,14 +26,13 @@
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/usb_otg.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/hardware.h>
-#include <asm/mach-types.h>
 
 #include <asm/arch/mux.h>
 #include <asm/arch/usb.h>
@@ -92,6 +91,8 @@ EXPORT_SYMBOL(otg_set_transceiver);
 
 /*-------------------------------------------------------------------------*/
 
+#if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP15XX)
+
 static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
 {
 	u32	syscon1 = 0;
@@ -272,6 +273,8 @@ static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup)
 	return syscon1 << 24;
 }
 
+#endif
+
 /*-------------------------------------------------------------------------*/
 
 #if	defined(CONFIG_USB_GADGET_OMAP) || \
@@ -495,7 +498,7 @@ static inline void omap_otg_init(struct omap_usb_config *config) {}
 
 /*-------------------------------------------------------------------------*/
 
-#ifdef	CONFIG_ARCH_OMAP1510
+#ifdef	CONFIG_ARCH_OMAP15XX
 
 #define ULPD_DPLL_CTRL_REG	__REG16(ULPD_DPLL_CTRL)
 #define DPLL_IOB		(1 << 13)
@@ -508,7 +511,6 @@ static inline void omap_otg_init(struct omap_usb_config *config) {}
 
 static void __init omap_1510_usb_init(struct omap_usb_config *config)
 {
-	int status;
 	unsigned int val;
 
 	omap_usb0_init(config->pins[0], is_usb0_device(config));
@@ -540,6 +542,8 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config)
 
 #ifdef	CONFIG_USB_GADGET_OMAP
 	if (config->register_dev) {
+		int status;
+
 		udc_device.dev.platform_data = config;
 		status = platform_device_register(&udc_device);
 		if (status)
@@ -550,6 +554,8 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config)
 
 #if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 	if (config->register_host) {
+		int status;
+
 		ohci_device.dev.platform_data = config;
 		status = platform_device_register(&ohci_device);
 		if (status)
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 6d3a79e5fef8..465487470d0e 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -2,11 +2,17 @@
 #
 # This file is linux/arch/arm/tools/mach-types
 #
+# Up to date versions of this file can be obtained from:
+#
+#   http://www.arm.linux.org.uk/developer/machines/?action=download
+#
 # Please do not send patches to this file; it is automatically generated!
 # To add an entry into this database, please see Documentation/arm/README,
-# or contact rmk@arm.linux.org.uk
+# or visit:
+#
+#   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Thu Jun 23 20:19:33 2005
+# Last update: Fri Nov 25 14:43:04 2005
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -421,7 +427,7 @@ mt02			MACH_MT02		MT02			410
 mport3s			MACH_MPORT3S		MPORT3S			411
 ra_alpha		MACH_RA_ALPHA		RA_ALPHA		412
 xcep			MACH_XCEP		XCEP			413
-arcom_mercury		MACH_ARCOM_MERCURY	ARCOM_MERCURY		414
+arcom_vulcan		MACH_ARCOM_VULCAN	ARCOM_VULCAN		414
 stargate		MACH_STARGATE		STARGATE		415
 armadilloj		MACH_ARMADILLOJ		ARMADILLOJ		416
 elroy_jack		MACH_ELROY_JACK		ELROY_JACK		417
@@ -454,7 +460,7 @@ esl_sarva		MACH_ESL_SARVA		ESL_SARVA		443
 xm250			MACH_XM250		XM250			444
 t6tc1xb			MACH_T6TC1XB		T6TC1XB			445
 ess710			MACH_ESS710		ESS710			446
-mx3ads			MACH_MX3ADS		MX3ADS			447
+mx31ads			MACH_MX31ADS		MX31ADS			447
 himalaya		MACH_HIMALAYA		HIMALAYA		448
 bolfenk			MACH_BOLFENK		BOLFENK			449
 at91rm9200kr		MACH_AT91RM9200KR	AT91RM9200KR		450
@@ -787,3 +793,120 @@ ez_ixp42x		MACH_EZ_IXP42X		EZ_IXP42X		778
 tapwave_zodiac		MACH_TAPWAVE_ZODIAC	TAPWAVE_ZODIAC		779
 universalmeter		MACH_UNIVERSALMETER	UNIVERSALMETER		780
 hicoarm9		MACH_HICOARM9		HICOARM9		781
+pnx4008			MACH_PNX4008		PNX4008			782
+kws6000			MACH_KWS6000		KWS6000			783
+portux920t		MACH_PORTUX920T		PORTUX920T		784
+ez_x5			MACH_EZ_X5		EZ_X5			785
+omap_rudolph		MACH_OMAP_RUDOLPH	OMAP_RUDOLPH		786
+cpuat91			MACH_CPUAT91		CPUAT91			787
+rea9200			MACH_REA9200		REA9200			788
+acts_pune_sa1110	MACH_ACTS_PUNE_SA1110	ACTS_PUNE_SA1110	789
+ixp425			MACH_IXP425		IXP425			790
+argonplusodyssey	MACH_ARGONPLUSODYSSEY	ARGONPLUSODYSSEY	791
+perch			MACH_PERCH		PERCH			792
+eis05r1			MACH_EIS05R1		EIS05R1			793
+pepperpad		MACH_PEPPERPAD		PEPPERPAD		794
+sb3010			MACH_SB3010		SB3010			795
+rm9200			MACH_RM9200		RM9200			796
+dma03			MACH_DMA03		DMA03			797
+road_s101		MACH_ROAD_S101		ROAD_S101		798
+iq_nextgen_a		MACH_IQ_NEXTGEN_A	IQ_NEXTGEN_A		799
+iq_nextgen_b		MACH_IQ_NEXTGEN_B	IQ_NEXTGEN_B		800
+iq_nextgen_c		MACH_IQ_NEXTGEN_C	IQ_NEXTGEN_C		801
+iq_nextgen_d		MACH_IQ_NEXTGEN_D	IQ_NEXTGEN_D		802
+iq_nextgen_e		MACH_IQ_NEXTGEN_E	IQ_NEXTGEN_E		803
+mallow_at91		MACH_MALLOW_AT91	MALLOW_AT91		804
+cybertracker_i		MACH_CYBERTRACKER_I	CYBERTRACKER_I		805
+gesbc931x		MACH_GESBC931X		GESBC931X		806
+centipad		MACH_CENTIPAD		CENTIPAD		807
+armsoc			MACH_ARMSOC		ARMSOC			808
+se4200			MACH_SE4200		SE4200			809
+ems197a			MACH_EMS197A		EMS197A			810
+micro9			MACH_MICRO9		MICRO9			811
+micro9l			MACH_MICRO9L		MICRO9L			812
+uc5471dsp		MACH_UC5471DSP		UC5471DSP		813
+sj5471eng		MACH_SJ5471ENG		SJ5471ENG		814
+none			MACH_CMPXA26X		CMPXA26X		815
+nc			MACH_NC			NC			816
+omap_palmte		MACH_OMAP_PALMTE	OMAP_PALMTE		817
+ajax52x			MACH_AJAX52X		AJAX52X			818
+siriustar		MACH_SIRIUSTAR		SIRIUSTAR		819
+iodata_hdlg		MACH_IODATA_HDLG	IODATA_HDLG		820
+at91rm9200utl		MACH_AT91RM9200UTL	AT91RM9200UTL		821
+biosafe			MACH_BIOSAFE		BIOSAFE			822
+mp1000			MACH_MP1000		MP1000			823
+parsy			MACH_PARSY		PARSY			824
+ccxp270			MACH_CCXP		CCXP			825
+omap_gsample		MACH_OMAP_GSAMPLE	OMAP_GSAMPLE		826
+realview_eb		MACH_REALVIEW_EB	REALVIEW_EB		827
+samoa			MACH_SAMOA		SAMOA			828
+t3xscale		MACH_T3XSCALE		T3XSCALE		829
+i878			MACH_I878		I878			830
+borzoi			MACH_BORZOI		BORZOI			831
+gecko			MACH_GECKO		GECKO			832
+ds101			MACH_DS101		DS101			833
+omap_palmtt2		MACH_OMAP_PALMTT2	OMAP_PALMTT2		834
+xscale_palmld		MACH_XSCALE_PALMLD	XSCALE_PALMLD		835
+cc9c			MACH_CC9C		CC9C			836
+sbc1670			MACH_SBC1670		SBC1670			837
+ixdp28x5		MACH_IXDP28X5		IXDP28X5		838
+omap_palmtt		MACH_OMAP_PALMTT	OMAP_PALMTT		839
+ml696k			MACH_ML696K		ML696K			840
+arcom_zeus		MACH_ARCOM_ZEUS		ARCOM_ZEUS		841
+osiris			MACH_OSIRIS		OSIRIS			842
+maestro			MACH_MAESTRO		MAESTRO			843
+tunge2			MACH_TUNGE2		TUNGE2			844
+ixbbm			MACH_IXBBM		IXBBM			845
+mx27ads			MACH_MX27		MX27			846
+ax8004			MACH_AX8004		AX8004			847
+at91sam9261ek		MACH_AT91SAM9261EK	AT91SAM9261EK		848
+loft			MACH_LOFT		LOFT			849
+magpie			MACH_MAGPIE		MAGPIE			850
+mx21ads			MACH_MX21		MX21			851
+mb87m3400		MACH_MB87M3400		MB87M3400		852
+mguard_delta		MACH_MGUARD_DELTA	MGUARD_DELTA		853
+davinci_dvdp		MACH_DAVINCI_DVDP	DAVINCI_DVDP		854
+htcuniversal		MACH_HTCUNIVERSAL	HTCUNIVERSAL		855
+tpad			MACH_TPAD		TPAD			856
+roverp3			MACH_ROVERP3		ROVERP3			857
+jornada928		MACH_JORNADA928		JORNADA928		858
+mv88fxx81		MACH_MV88FXX81		MV88FXX81		859
+stmp36xx		MACH_STMP36XX		STMP36XX		860
+sxni79524		MACH_SXNI79524		SXNI79524		861
+ams_delta		MACH_AMS_DELTA		AMS_DELTA		862
+uranium			MACH_URANIUM		URANIUM			863
+ucon			MACH_UCON		UCON			864
+nas100d			MACH_NAS100D		NAS100D			865
+l083			MACH_L083_1000		L083_1000		866
+ezx			MACH_EZX		EZX			867
+pnx5220			MACH_PNX5220		PNX5220			868
+butte			MACH_BUTTE		BUTTE			869
+srm2			MACH_SRM2		SRM2			870
+dsbr			MACH_DSBR		DSBR			871
+crystalball		MACH_CRYSTALBALL	CRYSTALBALL		872
+tinypxa27x		MACH_TINYPXA27X		TINYPXA27X		873
+herbie			MACH_HERBIE		HERBIE			874
+magician		MACH_MAGICIAN		MAGICIAN		875
+cm4002			MACH_CM4002		CM4002			876
+b4			MACH_B4			B4			877
+maui			MACH_MAUI		MAUI			878
+cybertracker_g		MACH_CYBERTRACKER_G	CYBERTRACKER_G		879
+nxdkn			MACH_NXDKN		NXDKN			880
+mio8390			MACH_MIO8390		MIO8390			881
+omi_board		MACH_OMI_BOARD		OMI_BOARD		882
+mx21civ			MACH_MX21CIV		MX21CIV			883
+mahi_cdac		MACH_MAHI_CDAC		MAHI_CDAC		884
+xscale_palmtx		MACH_XSCALE_PALMTX	XSCALE_PALMTX		885
+s3c2413			MACH_S3C2413		S3C2413			887
+samsys_ep0		MACH_SAMSYS_EP0		SAMSYS_EP0		888
+wg302v1			MACH_WG302V1		WG302V1			889
+wg302v2			MACH_WG302V2		WG302V2			890
+eb42x			MACH_EB42X		EB42X			891
+iq331es			MACH_IQ331ES		IQ331ES			892
+cosydsp			MACH_COSYDSP		COSYDSP			893
+uplat7d			MACH_UPLAT7D		UPLAT7D			894
+ptdavinci		MACH_PTDAVINCI		PTDAVINCI		895
+mbus			MACH_MBUS		MBUS			896
+nadia2vb		MACH_NADIA2VB		NADIA2VB		897
+r1000			MACH_R1000		R1000			898
+hw90250			MACH_HW90250		HW90250			899
diff --git a/arch/arm26/kernel/process.c b/arch/arm26/kernel/process.c
index 9eb9964d32a7..15833a0057dd 100644
--- a/arch/arm26/kernel/process.c
+++ b/arch/arm26/kernel/process.c
@@ -74,15 +74,13 @@ __setup("hlt", hlt_setup);
 void cpu_idle(void)
 {
 	/* endless idle loop with no priority at all */
-	preempt_disable();
 	while (1) {
-		while (!need_resched()) {
-			local_irq_disable();
-			if (!need_resched() && !hlt_counter)
-				local_irq_enable();
-		}
+		while (!need_resched())
+			cpu_relax();
+		preempt_enable_no_resched();
+		schedule();
+		preempt_disable();
 	}
-	schedule();
 }
 
 static char reboot_mode = 'h';
diff --git a/arch/arm26/kernel/ptrace.c b/arch/arm26/kernel/ptrace.c
index 8a52124de0e1..4e6b7356a722 100644
--- a/arch/arm26/kernel/ptrace.c
+++ b/arch/arm26/kernel/ptrace.c
@@ -546,7 +546,7 @@ static int ptrace_setfpregs(struct task_struct *tsk, void *ufp)
 			      sizeof(struct user_fp)) ? -EFAULT : 0;
 }
 
-static int do_ptrace(int request, struct task_struct *child, long addr, long data)
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
 	unsigned long tmp;
 	int ret;
@@ -665,53 +665,6 @@ static int do_ptrace(int request, struct task_struct *child, long addr, long dat
 	return ret;
 }
 
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
-{
-	struct task_struct *child;
-	int ret;
-
-	lock_kernel();
-	ret = -EPERM;
-	if (request == PTRACE_TRACEME) {
-		/* are we already being traced? */
-		if (current->ptrace & PT_PTRACED)
-			goto out;
-		ret = security_ptrace(current->parent, current);
-		if (ret)
-			goto out;
-		/* set the ptrace bit in the process flags. */
-		current->ptrace |= PT_PTRACED;
-		ret = 0;
-		goto out;
-	}
-	ret = -ESRCH;
-	read_lock(&tasklist_lock);
-	child = find_task_by_pid(pid);
-	if (child)
-		get_task_struct(child);
-	read_unlock(&tasklist_lock);
-	if (!child)
-		goto out;
-
-	ret = -EPERM;
-	if (pid == 1)		/* you may not mess with init */
-		goto out_tsk;
-
-	if (request == PTRACE_ATTACH) {
-		ret = ptrace_attach(child);
-		goto out_tsk;
-	}
-	ret = ptrace_check_attach(child, request == PTRACE_KILL);
-	if (ret == 0)
-		ret = do_ptrace(request, child, addr, data);
-
-out_tsk:
-	put_task_struct(child);
-out:
-	unlock_kernel();
-	return ret;
-}
-
 asmlinkage void syscall_trace(int why, struct pt_regs *regs)
 {
 	unsigned long ip;
diff --git a/arch/arm26/kernel/time.c b/arch/arm26/kernel/time.c
index e66aedd02fad..335525339ad6 100644
--- a/arch/arm26/kernel/time.c
+++ b/arch/arm26/kernel/time.c
@@ -34,10 +34,6 @@
 #include <asm/irq.h>
 #include <asm/ioc.h>
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 extern unsigned long wall_jiffies;
 
 /* this needs a better home */
diff --git a/arch/arm26/mm/memc.c b/arch/arm26/mm/memc.c
index 8e8a2bb2487d..34def6397c3c 100644
--- a/arch/arm26/mm/memc.c
+++ b/arch/arm26/mm/memc.c
@@ -79,12 +79,6 @@ pgd_t *get_pgd_slow(struct mm_struct *mm)
 		goto no_pgd;
 
 	/*
-	 * This lock is here just to satisfy pmd_alloc and pte_lock
-         * FIXME: I bet we could avoid taking it pretty much altogether
-	 */
-	spin_lock(&mm->page_table_lock);
-
-	/*
 	 * On ARM, first page must always be allocated since it contains
 	 * the machine vectors.
 	 */
@@ -92,7 +86,7 @@ pgd_t *get_pgd_slow(struct mm_struct *mm)
 	if (!new_pmd)
 		goto no_pmd;
 
-	new_pte = pte_alloc_kernel(mm, new_pmd, 0);
+	new_pte = pte_alloc_map(mm, new_pmd, 0);
 	if (!new_pte)
 		goto no_pte;
 
@@ -101,6 +95,7 @@ pgd_t *get_pgd_slow(struct mm_struct *mm)
 	init_pte = pte_offset(init_pmd, 0);
 
 	set_pte(new_pte, *init_pte);
+	pte_unmap(new_pte);
 
 	/*
 	 * the page table entries are zeroed
@@ -112,23 +107,14 @@ pgd_t *get_pgd_slow(struct mm_struct *mm)
 	memcpy(new_pgd + FIRST_KERNEL_PGD_NR, init_pgd + FIRST_KERNEL_PGD_NR,
 		(PTRS_PER_PGD - FIRST_KERNEL_PGD_NR) * sizeof(pgd_t));
 
-	spin_unlock(&mm->page_table_lock);
-
 	/* update MEMC tables */
 	cpu_memc_update_all(new_pgd);
 	return new_pgd;
 
 no_pte:
-	spin_unlock(&mm->page_table_lock);
 	pmd_free(new_pmd);
-	free_pgd_slow(new_pgd);
-	return NULL;
-
 no_pmd:
-	spin_unlock(&mm->page_table_lock);
 	free_pgd_slow(new_pgd);
-	return NULL;
-
 no_pgd:
 	return NULL;
 }
diff --git a/arch/cris/arch-v10/README.mm b/arch/cris/arch-v10/README.mm
index 6f08903f3139..517d1f027fe8 100644
--- a/arch/cris/arch-v10/README.mm
+++ b/arch/cris/arch-v10/README.mm
@@ -177,7 +177,7 @@ The example address is 0xd004000c; in binary this is:
 Given the top-level Page Directory, the offset in that directory is calculated
 using the upper 8 bits:
 
-extern inline pgd_t * pgd_offset(struct mm_struct * mm, unsigned long address)
+static inline pgd_t * pgd_offset(struct mm_struct * mm, unsigned long address)
 {
 	return mm->pgd + (address >> PGDIR_SHIFT);
 }
@@ -190,14 +190,14 @@ The pgd_t from our example will therefore be the 208'th (0xd0) entry in mm->pgd.
 
 Since the Middle Directory does not exist, it is a unity mapping:
 
-extern inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address)
+static inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address)
 {
 	return (pmd_t *) dir;
 }
 
 The Page Table provides the final lookup by using bits 13 to 23 as index:
 
-extern inline pte_t * pte_offset(pmd_t * dir, unsigned long address)
+static inline pte_t * pte_offset(pmd_t * dir, unsigned long address)
 {
 	return (pte_t *) pmd_page(*dir) + ((address >> PAGE_SHIFT) &
 					   (PTRS_PER_PTE - 1));
diff --git a/arch/cris/arch-v10/drivers/axisflashmap.c b/arch/cris/arch-v10/drivers/axisflashmap.c
index 11ab3836aac6..56b038c8d482 100644
--- a/arch/cris/arch-v10/drivers/axisflashmap.c
+++ b/arch/cris/arch-v10/drivers/axisflashmap.c
@@ -140,6 +140,7 @@
 #include <linux/kernel.h>
 #include <linux/config.h>
 #include <linux/init.h>
+#include <linux/slab.h>
 
 #include <linux/mtd/concat.h>
 #include <linux/mtd/map.h>
diff --git a/arch/cris/arch-v10/drivers/pcf8563.c b/arch/cris/arch-v10/drivers/pcf8563.c
index 201f4c90d961..f2c55742e90c 100644
--- a/arch/cris/arch-v10/drivers/pcf8563.c
+++ b/arch/cris/arch-v10/drivers/pcf8563.c
@@ -19,7 +19,6 @@
  */
 
 #include <linux/config.h>
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
diff --git a/arch/cris/arch-v10/kernel/fasttimer.c b/arch/cris/arch-v10/kernel/fasttimer.c
index 094ff45ae85b..cac05a5e514c 100644
--- a/arch/cris/arch-v10/kernel/fasttimer.c
+++ b/arch/cris/arch-v10/kernel/fasttimer.c
@@ -112,7 +112,6 @@
 #include <asm/rtc.h>
 
 #include <linux/config.h>
-#include <linux/version.h>
 
 #include <asm/arch/svinto.h>
 #include <asm/fasttimer.h>
diff --git a/arch/cris/arch-v10/kernel/ptrace.c b/arch/cris/arch-v10/kernel/ptrace.c
index 130dd214e41d..6cbd34a27b90 100644
--- a/arch/cris/arch-v10/kernel/ptrace.c
+++ b/arch/cris/arch-v10/kernel/ptrace.c
@@ -76,55 +76,11 @@ ptrace_disable(struct task_struct *child)
  * (in user space) where the result of the ptrace call is written (instead of
  * being returned).
  */
-asmlinkage int 
-sys_ptrace(long request, long pid, long addr, long data)
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
-	struct task_struct *child;
 	int ret;
 	unsigned long __user *datap = (unsigned long __user *)data;
 
-	lock_kernel();
-	ret = -EPERM;
-	
-	if (request == PTRACE_TRACEME) {
-		/* are we already being traced? */
-		if (current->ptrace & PT_PTRACED)
-			goto out;
-		ret = security_ptrace(current->parent, current);
-		if (ret)
-			goto out;
-		/* set the ptrace bit in the process flags. */
-		current->ptrace |= PT_PTRACED;
-		ret = 0;
-		goto out;
-	}
-	
-	ret = -ESRCH;
-	read_lock(&tasklist_lock);
-	child = find_task_by_pid(pid);
-	
-	if (child)
-		get_task_struct(child);
-	
-	read_unlock(&tasklist_lock);
-	
-	if (!child)
-		goto out;
-	
-	ret = -EPERM;
-	
-	if (pid == 1)		/* Leave the init process alone! */
-		goto out_tsk;
-	
-	if (request == PTRACE_ATTACH) {
-		ret = ptrace_attach(child);
-		goto out_tsk;
-	}
-	
-	ret = ptrace_check_attach(child, request == PTRACE_KILL);
-	if (ret < 0)
-		goto out_tsk;
-
 	switch (request) {
 		/* Read word at location address. */ 
 		case PTRACE_PEEKTEXT:
@@ -289,10 +245,7 @@ sys_ptrace(long request, long pid, long addr, long data)
 			ret = ptrace_request(child, request, addr, data);
 			break;
 	}
-out_tsk:
-	put_task_struct(child);
-out:
-	unlock_kernel();
+
 	return ret;
 }
 
diff --git a/arch/cris/arch-v10/kernel/signal.c b/arch/cris/arch-v10/kernel/signal.c
index 693771961f85..19bcad05716f 100644
--- a/arch/cris/arch-v10/kernel/signal.c
+++ b/arch/cris/arch-v10/kernel/signal.c
@@ -476,7 +476,7 @@ give_sigsegv:
  * OK, we're invoking a handler
  */	
 
-extern inline void
+static inline void
 handle_signal(int canrestart, unsigned long sig,
 	      siginfo_t *info, struct k_sigaction *ka,
               sigset_t *oldset, struct pt_regs * regs)
diff --git a/arch/cris/arch-v32/drivers/axisflashmap.c b/arch/cris/arch-v32/drivers/axisflashmap.c
index 78ed52b1cdac..b679f983b90a 100644
--- a/arch/cris/arch-v32/drivers/axisflashmap.c
+++ b/arch/cris/arch-v32/drivers/axisflashmap.c
@@ -20,6 +20,7 @@
 #include <linux/kernel.h>
 #include <linux/config.h>
 #include <linux/init.h>
+#include <linux/slab.h>
 
 #include <linux/mtd/concat.h>
 #include <linux/mtd/map.h>
diff --git a/arch/cris/arch-v32/drivers/cryptocop.c b/arch/cris/arch-v32/drivers/cryptocop.c
index ca72076c630a..501fa52d8d3a 100644
--- a/arch/cris/arch-v32/drivers/cryptocop.c
+++ b/arch/cris/arch-v32/drivers/cryptocop.c
@@ -277,7 +277,7 @@ struct file_operations cryptocop_fops = {
 static void free_cdesc(struct cryptocop_dma_desc *cdesc)
 {
 	DEBUG(printk("free_cdesc: cdesc 0x%p, from_pool=%d\n", cdesc, cdesc->from_pool));
-	if (cdesc->free_buf) kfree(cdesc->free_buf);
+	kfree(cdesc->free_buf);
 
 	if (cdesc->from_pool) {
 		unsigned long int flags;
@@ -2950,15 +2950,15 @@ static int cryptocop_ioctl_process(struct inode *inode, struct file *filp, unsig
 		put_page(outpages[i]);
 	}
 
-	if (digest_result) kfree(digest_result);
-	if (inpages) kfree(inpages);
-	if (outpages) kfree(outpages);
+	kfree(digest_result);
+	kfree(inpages);
+	kfree(outpages);
 	if (cop){
-		if (cop->tfrm_op.indata) kfree(cop->tfrm_op.indata);
-		if (cop->tfrm_op.outdata) kfree(cop->tfrm_op.outdata);
+		kfree(cop->tfrm_op.indata);
+		kfree(cop->tfrm_op.outdata);
 		kfree(cop);
 	}
-	if (jc) kfree(jc);
+	kfree(jc);
 
 	DEBUG(print_lock_status());
 
diff --git a/arch/cris/arch-v32/drivers/nandflash.c b/arch/cris/arch-v32/drivers/nandflash.c
index fc2a619b035d..93ddea4d9564 100644
--- a/arch/cris/arch-v32/drivers/nandflash.c
+++ b/arch/cris/arch-v32/drivers/nandflash.c
@@ -14,7 +14,6 @@
  *
  */
 
-#include <linux/version.h>
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/module.h>
diff --git a/arch/cris/arch-v32/drivers/pcf8563.c b/arch/cris/arch-v32/drivers/pcf8563.c
index f894580b648b..d788bda3578c 100644
--- a/arch/cris/arch-v32/drivers/pcf8563.c
+++ b/arch/cris/arch-v32/drivers/pcf8563.c
@@ -18,7 +18,6 @@
  */
 
 #include <linux/config.h>
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
diff --git a/arch/cris/arch-v32/drivers/pci/dma.c b/arch/cris/arch-v32/drivers/pci/dma.c
index 10329306d23c..426b09878a05 100644
--- a/arch/cris/arch-v32/drivers/pci/dma.c
+++ b/arch/cris/arch-v32/drivers/pci/dma.c
@@ -24,7 +24,7 @@ struct dma_coherent_mem {
 };
 
 void *dma_alloc_coherent(struct device *dev, size_t size,
-			   dma_addr_t *dma_handle, unsigned int __nocast gfp)
+			   dma_addr_t *dma_handle, gfp_t gfp)
 {
 	void *ret;
 	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
diff --git a/arch/cris/arch-v32/kernel/ptrace.c b/arch/cris/arch-v32/kernel/ptrace.c
index 208489da2a87..5528b83a622b 100644
--- a/arch/cris/arch-v32/kernel/ptrace.c
+++ b/arch/cris/arch-v32/kernel/ptrace.c
@@ -99,55 +99,11 @@ ptrace_disable(struct task_struct *child)
 }
 
 
-asmlinkage int
-sys_ptrace(long request, long pid, long addr, long data)
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
-	struct task_struct *child;
 	int ret;
 	unsigned long __user *datap = (unsigned long __user *)data;
 
-	lock_kernel();
-	ret = -EPERM;
-
-	if (request == PTRACE_TRACEME) {
-		/* are we already being traced? */
-		if (current->ptrace & PT_PTRACED)
-			goto out;
-		ret = security_ptrace(current->parent, current);
-		if (ret)
-			goto out;
-		/* set the ptrace bit in the process flags. */
-		current->ptrace |= PT_PTRACED;
-		ret = 0;
-		goto out;
-	}
-
-	ret = -ESRCH;
-	read_lock(&tasklist_lock);
-	child = find_task_by_pid(pid);
-
-	if (child)
-		get_task_struct(child);
-
-	read_unlock(&tasklist_lock);
-
-	if (!child)
-		goto out;
-
-	ret = -EPERM;
-
-	if (pid == 1)		/* Leave the init process alone! */
-		goto out_tsk;
-
-	if (request == PTRACE_ATTACH) {
-		ret = ptrace_attach(child);
-		goto out_tsk;
-	}
-
-	ret = ptrace_check_attach(child, request == PTRACE_KILL);
-	if (ret < 0)
-		goto out_tsk;
-
 	switch (request) {
 		/* Read word at location address. */
 		case PTRACE_PEEKTEXT:
@@ -347,10 +303,7 @@ sys_ptrace(long request, long pid, long addr, long data)
 			ret = ptrace_request(child, request, addr, data);
 			break;
 	}
-out_tsk:
-	put_task_struct(child);
-out:
-	unlock_kernel();
+
 	return ret;
 }
 
diff --git a/arch/cris/arch-v32/kernel/signal.c b/arch/cris/arch-v32/kernel/signal.c
index 0a3614dab887..99e59b3eacf8 100644
--- a/arch/cris/arch-v32/kernel/signal.c
+++ b/arch/cris/arch-v32/kernel/signal.c
@@ -513,7 +513,7 @@ give_sigsegv:
 }
 
 /* Invoke a singal handler to, well, handle the signal. */
-extern inline void
+static inline void
 handle_signal(int canrestart, unsigned long sig,
 	      siginfo_t *info, struct k_sigaction *ka,
               sigset_t *oldset, struct pt_regs * regs)
diff --git a/arch/cris/arch-v32/kernel/smp.c b/arch/cris/arch-v32/kernel/smp.c
index 2c5cae04a95c..13867f4fad16 100644
--- a/arch/cris/arch-v32/kernel/smp.c
+++ b/arch/cris/arch-v32/kernel/smp.c
@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/cpumask.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 
 #define IPI_SCHEDULE 1
 #define IPI_CALL 2
@@ -28,6 +29,7 @@ spinlock_t cris_atomic_locks[] = { [0 ... LOCK_COUNT - 1] = SPIN_LOCK_UNLOCKED};
 /* CPU masks */
 cpumask_t cpu_online_map = CPU_MASK_NONE;
 cpumask_t phys_cpu_present_map = CPU_MASK_NONE;
+EXPORT_SYMBOL(phys_cpu_present_map);
 
 /* Variables used during SMP boot */
 volatile int cpu_now_booting = 0;
@@ -159,6 +161,7 @@ void __init smp_callin(void)
 	REG_WR(intr_vect, irq_regs[cpu], rw_mask, vect_mask);
 	unmask_irq(IPI_INTR_VECT);
 	unmask_irq(TIMER_INTR_VECT);
+	preempt_disable();
 	local_irq_enable();
 
 	cpu_set(cpu, cpu_online_map);
diff --git a/arch/cris/arch-v32/mm/tlb.c b/arch/cris/arch-v32/mm/tlb.c
index 8233406798d3..b08a28bb58ab 100644
--- a/arch/cris/arch-v32/mm/tlb.c
+++ b/arch/cris/arch-v32/mm/tlb.c
@@ -175,6 +175,8 @@ init_new_context(struct task_struct *tsk, struct mm_struct *mm)
 	return 0;
 }
 
+static DEFINE_SPINLOCK(mmu_context_lock);
+
 /* Called in schedule() just before actually doing the switch_to. */
 void
 switch_mm(struct mm_struct *prev, struct mm_struct *next,
@@ -183,10 +185,10 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next,
 	int cpu = smp_processor_id();
 
 	/* Make sure there is a MMU context. */
-	spin_lock(&next->page_table_lock);
+	spin_lock(&mmu_context_lock);
 	get_mmu_context(next);
 	cpu_set(cpu, next->cpu_vm_mask);
-	spin_unlock(&next->page_table_lock);
+	spin_unlock(&mmu_context_lock);
 
 	/*
 	 * Remember the pgd for the fault handlers. Keep a seperate copy of it
diff --git a/arch/cris/kernel/process.c b/arch/cris/kernel/process.c
index 949a0e40e03c..7c80afb10460 100644
--- a/arch/cris/kernel/process.c
+++ b/arch/cris/kernel/process.c
@@ -218,7 +218,9 @@ void cpu_idle (void)
 				idle = default_idle;
 			idle();
 		}
+		preempt_enable_no_resched();
 		schedule();
+		preempt_disable();
 	}
 }
 
diff --git a/arch/cris/kernel/time.c b/arch/cris/kernel/time.c
index a2d99b4aedcd..66ba8898db07 100644
--- a/arch/cris/kernel/time.c
+++ b/arch/cris/kernel/time.c
@@ -31,10 +31,7 @@
 #include <linux/timex.h>
 #include <linux/init.h>
 #include <linux/profile.h>
-
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
+#include <linux/sched.h>	/* just for sched_clock() - funny that */
 
 int have_rtc;  /* used to remember if we have an RTC or not */;
 
diff --git a/arch/cris/mm/ioremap.c b/arch/cris/mm/ioremap.c
index ebba11e270fa..1780df3ed9e5 100644
--- a/arch/cris/mm/ioremap.c
+++ b/arch/cris/mm/ioremap.c
@@ -16,7 +16,7 @@
 #include <asm/tlbflush.h>
 #include <asm/arch/memmap.h>
 
-extern inline void remap_area_pte(pte_t * pte, unsigned long address, unsigned long size,
+static inline void remap_area_pte(pte_t * pte, unsigned long address, unsigned long size,
 	unsigned long phys_addr, pgprot_t prot)
 {
 	unsigned long end;
@@ -52,7 +52,7 @@ static inline int remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned lo
 	if (address >= end)
 		BUG();
 	do {
-		pte_t * pte = pte_alloc_kernel(&init_mm, pmd, address);
+		pte_t * pte = pte_alloc_kernel(pmd, address);
 		if (!pte)
 			return -ENOMEM;
 		remap_area_pte(pte, address, end - address, address + phys_addr, prot);
@@ -74,7 +74,6 @@ static int remap_area_pages(unsigned long address, unsigned long phys_addr,
 	flush_cache_all();
 	if (address >= end)
 		BUG();
-	spin_lock(&init_mm.page_table_lock);
 	do {
 		pud_t *pud;
 		pmd_t *pmd;
@@ -94,7 +93,6 @@ static int remap_area_pages(unsigned long address, unsigned long phys_addr,
 		address = (address + PGDIR_SIZE) & PGDIR_MASK;
 		dir++;
 	} while (address && (address < end));
-	spin_unlock(&init_mm.page_table_lock);
 	flush_tlb_all();
 	return error;
 }
diff --git a/arch/frv/kernel/pm.c b/arch/frv/kernel/pm.c
index 1a1e8a119c3d..712c3c24c954 100644
--- a/arch/frv/kernel/pm.c
+++ b/arch/frv/kernel/pm.c
@@ -14,6 +14,7 @@
 #include <linux/config.h>
 #include <linux/init.h>
 #include <linux/pm.h>
+#include <linux/pm_legacy.h>
 #include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/sysctl.h>
diff --git a/arch/frv/kernel/process.c b/arch/frv/kernel/process.c
index 3001b82b1514..54a452136f00 100644
--- a/arch/frv/kernel/process.c
+++ b/arch/frv/kernel/process.c
@@ -77,16 +77,20 @@ void (*idle)(void) = core_sleep_idle;
  */
 void cpu_idle(void)
 {
+	int cpu = smp_processor_id();
+
 	/* endless idle loop with no priority at all */
 	while (1) {
 		while (!need_resched()) {
-			irq_stat[smp_processor_id()].idle_timestamp = jiffies;
+			irq_stat[cpu].idle_timestamp = jiffies;
 
 			if (!frv_dma_inprogress && idle)
 				idle();
 		}
 
+		preempt_enable_no_resched();
 		schedule();
+		preempt_disable();
 	}
 }
 
diff --git a/arch/frv/kernel/ptrace.c b/arch/frv/kernel/ptrace.c
index cbe03cba9f02..f953484e7d59 100644
--- a/arch/frv/kernel/ptrace.c
+++ b/arch/frv/kernel/ptrace.c
@@ -106,48 +106,11 @@ void ptrace_enable(struct task_struct *child)
 	child->thread.frame0->__status |= REG__STATUS_STEP;
 }
 
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
-	struct task_struct *child;
 	unsigned long tmp;
 	int ret;
 
-	lock_kernel();
-	ret = -EPERM;
-	if (request == PTRACE_TRACEME) {
-		/* are we already being traced? */
-		if (current->ptrace & PT_PTRACED)
-			goto out;
-		ret = security_ptrace(current->parent, current);
-		if (ret)
-			goto out;
-		/* set the ptrace bit in the process flags. */
-		current->ptrace |= PT_PTRACED;
-		ret = 0;
-		goto out;
-	}
-	ret = -ESRCH;
-	read_lock(&tasklist_lock);
-	child = find_task_by_pid(pid);
-	if (child)
-		get_task_struct(child);
-	read_unlock(&tasklist_lock);
-	if (!child)
-		goto out;
-
-	ret = -EPERM;
-	if (pid == 1)		/* you may not mess with init */
-		goto out_tsk;
-
-	if (request == PTRACE_ATTACH) {
-		ret = ptrace_attach(child);
-		goto out_tsk;
-	}
-
-	ret = ptrace_check_attach(child, request == PTRACE_KILL);
-	if (ret < 0)
-		goto out_tsk;
-
 	switch (request) {
 		/* when I and D space are separate, these will need to be fixed. */
 	case PTRACE_PEEKTEXT: /* read word at location addr. */
@@ -351,10 +314,6 @@ asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
 		ret = -EIO;
 		break;
 	}
-out_tsk:
-	put_task_struct(child);
-out:
-	unlock_kernel();
 	return ret;
 }
 
diff --git a/arch/frv/kernel/semaphore.c b/arch/frv/kernel/semaphore.c
index 5cba9c1f2b3d..7971d680ae29 100644
--- a/arch/frv/kernel/semaphore.c
+++ b/arch/frv/kernel/semaphore.c
@@ -20,7 +20,7 @@ struct sem_waiter {
 	struct task_struct	*task;
 };
 
-#if SEM_DEBUG
+#if SEMAPHORE_DEBUG
 void semtrace(struct semaphore *sem, const char *str)
 {
 	if (sem->debug)
diff --git a/arch/frv/kernel/time.c b/arch/frv/kernel/time.c
index 8d6558b00e44..2e9741227b73 100644
--- a/arch/frv/kernel/time.c
+++ b/arch/frv/kernel/time.c
@@ -34,9 +34,6 @@
 
 extern unsigned long wall_jiffies;
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-EXPORT_SYMBOL(jiffies_64);
-
 unsigned long __nongprelbss __clkin_clock_speed_HZ;
 unsigned long __nongprelbss __ext_bus_clock_speed_HZ;
 unsigned long __nongprelbss __res_bus_clock_speed_HZ;
@@ -221,6 +218,7 @@ int do_settimeofday(struct timespec *tv)
 	clock_was_set();
 	return 0;
 }
+EXPORT_SYMBOL(do_settimeofday);
 
 /*
  * Scheduler clock - returns current time in nanosec units.
diff --git a/arch/frv/mb93090-mb00/pci-dma-nommu.c b/arch/frv/mb93090-mb00/pci-dma-nommu.c
index 819895cf0b9e..2082a9647f4f 100644
--- a/arch/frv/mb93090-mb00/pci-dma-nommu.c
+++ b/arch/frv/mb93090-mb00/pci-dma-nommu.c
@@ -33,7 +33,7 @@ struct dma_alloc_record {
 static DEFINE_SPINLOCK(dma_alloc_lock);
 static LIST_HEAD(dma_alloc_list);
 
-void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, int gfp)
+void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t gfp)
 {
 	struct dma_alloc_record *new;
 	struct list_head *this = &dma_alloc_list;
diff --git a/arch/frv/mb93090-mb00/pci-dma.c b/arch/frv/mb93090-mb00/pci-dma.c
index 27eb12066507..86fbdadc51b6 100644
--- a/arch/frv/mb93090-mb00/pci-dma.c
+++ b/arch/frv/mb93090-mb00/pci-dma.c
@@ -17,7 +17,7 @@
 #include <linux/highmem.h>
 #include <asm/io.h>
 
-void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, int gfp)
+void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t gfp)
 {
 	void *ret;
 
diff --git a/arch/frv/mb93090-mb00/pci-irq.c b/arch/frv/mb93090-mb00/pci-irq.c
index af981bda015c..24622d89b1ca 100644
--- a/arch/frv/mb93090-mb00/pci-irq.c
+++ b/arch/frv/mb93090-mb00/pci-irq.c
@@ -60,7 +60,7 @@ void __init pcibios_fixup_irqs(void)
 	}
 }
 
-void __init pcibios_penalize_isa_irq(int irq, int active)
+void __init pcibios_penalize_isa_irq(int irq)
 {
 }
 
diff --git a/arch/frv/mm/dma-alloc.c b/arch/frv/mm/dma-alloc.c
index 4b38d45435f6..342823aad758 100644
--- a/arch/frv/mm/dma-alloc.c
+++ b/arch/frv/mm/dma-alloc.c
@@ -55,21 +55,18 @@ static int map_page(unsigned long va, unsigned long pa, pgprot_t prot)
 	pte_t *pte;
 	int err = -ENOMEM;
 
-	spin_lock(&init_mm.page_table_lock);
-
 	/* Use upper 10 bits of VA to index the first level map */
 	pge = pgd_offset_k(va);
 	pue = pud_offset(pge, va);
 	pme = pmd_offset(pue, va);
 
 	/* Use middle 10 bits of VA to index the second-level map */
-	pte = pte_alloc_kernel(&init_mm, pme, va);
+	pte = pte_alloc_kernel(pme, va);
 	if (pte != 0) {
 		err = 0;
 		set_pte(pte, mk_pte_phys(pa & PAGE_MASK, prot));
 	}
 
-	spin_unlock(&init_mm.page_table_lock);
 	return err;
 }
 
@@ -81,7 +78,7 @@ static int map_page(unsigned long va, unsigned long pa, pgprot_t prot)
  * portions of the kernel with single large page TLB entries, and
  * still get unique uncached pages for consistent DMA.
  */
-void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle)
+void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *dma_handle)
 {
 	struct vm_struct *area;
 	unsigned long page, va, pa;
diff --git a/arch/frv/mm/init.c b/arch/frv/mm/init.c
index 79433159b5f0..765088ea8a50 100644
--- a/arch/frv/mm/init.c
+++ b/arch/frv/mm/init.c
@@ -108,7 +108,7 @@ void __init paging_init(void)
 
 	memset((void *) empty_zero_page, 0, PAGE_SIZE);
 
-#if CONFIG_HIGHMEM
+#ifdef CONFIG_HIGHMEM
 	if (num_physpages - num_mappedpages) {
 		pgd_t *pge;
 		pud_t *pue;
diff --git a/arch/frv/mm/pgalloc.c b/arch/frv/mm/pgalloc.c
index 4eaec0f3525b..f76dd03ddd99 100644
--- a/arch/frv/mm/pgalloc.c
+++ b/arch/frv/mm/pgalloc.c
@@ -85,19 +85,19 @@ static inline void pgd_list_add(pgd_t *pgd)
 	struct page *page = virt_to_page(pgd);
 	page->index = (unsigned long) pgd_list;
 	if (pgd_list)
-		pgd_list->private = (unsigned long) &page->index;
+		set_page_private(pgd_list, (unsigned long) &page->index);
 	pgd_list = page;
-	page->private = (unsigned long) &pgd_list;
+	set_page_private(page, (unsigned long)&pgd_list);
 }
 
 static inline void pgd_list_del(pgd_t *pgd)
 {
 	struct page *next, **pprev, *page = virt_to_page(pgd);
 	next = (struct page *) page->index;
-	pprev = (struct page **) page->private;
+	pprev = (struct page **) page_private(page);
 	*pprev = next;
 	if (next)
-		next->private = (unsigned long) pprev;
+		set_page_private(next, (unsigned long) pprev);
 }
 
 void pgd_ctor(void *pgd, kmem_cache_t *cache, unsigned long unused)
diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c
index 27f1fce64ce4..fe21adf3e75e 100644
--- a/arch/h8300/kernel/process.c
+++ b/arch/h8300/kernel/process.c
@@ -53,22 +53,18 @@ asmlinkage void ret_from_fork(void);
 #if !defined(CONFIG_H8300H_SIM) && !defined(CONFIG_H8S_SIM)
 void default_idle(void)
 {
-	while(1) {
-		if (!need_resched()) {
-			local_irq_enable();
-			__asm__("sleep");
-			local_irq_disable();
-		}
-		schedule();
-	}
+	local_irq_disable();
+	if (!need_resched()) {
+		local_irq_enable();
+		/* XXX: race here! What if need_resched() gets set now? */
+		__asm__("sleep");
+	} else
+		local_irq_enable();
 }
 #else
 void default_idle(void)
 {
-	while(1) {
-		if (need_resched())
-			schedule();
-	}
+	cpu_relax();
 }
 #endif
 void (*idle)(void) = default_idle;
@@ -81,7 +77,13 @@ void (*idle)(void) = default_idle;
  */
 void cpu_idle(void)
 {
-	idle();
+	while (1) {
+		while (!need_resched())
+			idle();
+		preempt_enable_no_resched();
+		schedule();
+		preempt_disable();
+	}
 }
 
 void machine_restart(char * __unused)
diff --git a/arch/h8300/kernel/ptrace.c b/arch/h8300/kernel/ptrace.c
index 05c15e869777..0ff6f79b0fed 100644
--- a/arch/h8300/kernel/ptrace.c
+++ b/arch/h8300/kernel/ptrace.c
@@ -57,43 +57,10 @@ void ptrace_disable(struct task_struct *child)
 	h8300_disable_trace(child);
 }
 
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
-	struct task_struct *child;
 	int ret;
 
-	lock_kernel();
-	ret = -EPERM;
-	if (request == PTRACE_TRACEME) {
-		/* are we already being traced? */
-		if (current->ptrace & PT_PTRACED)
-			goto out;
-		/* set the ptrace bit in the process flags. */
-		current->ptrace |= PT_PTRACED;
-		ret = 0;
-		goto out;
-	}
-	ret = -ESRCH;
-	read_lock(&tasklist_lock);
-	child = find_task_by_pid(pid);
-	if (child)
-		get_task_struct(child);
-	read_unlock(&tasklist_lock);
-	if (!child)
-		goto out;
-
-	ret = -EPERM;
-	if (pid == 1)		/* you may not mess with init */
-		goto out_tsk;
-
-	if (request == PTRACE_ATTACH) {
-		ret = ptrace_attach(child);
-		goto out_tsk;
-	}
-	ret = ptrace_check_attach(child, request == PTRACE_KILL);
-	if (ret < 0)
-		goto out_tsk;
-
 	switch (request) {
 		case PTRACE_PEEKTEXT: /* read word at location addr. */ 
 		case PTRACE_PEEKDATA: {
@@ -251,10 +218,6 @@ asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
 			ret = -EIO;
 			break;
 	}
-out_tsk:
-	put_task_struct(child);
-out:
-	unlock_kernel();
 	return ret;
 }
 
diff --git a/arch/h8300/kernel/time.c b/arch/h8300/kernel/time.c
index af8c5d2057dd..688a5100604c 100644
--- a/arch/h8300/kernel/time.c
+++ b/arch/h8300/kernel/time.c
@@ -32,10 +32,6 @@
 
 #define	TICK_SIZE (tick_nsec / 1000)
 
-u64 jiffies_64;
-
-EXPORT_SYMBOL(jiffies_64);
-
 /*
  * timer_interrupt() needs to keep up the real-time clock,
  * as well as call the "do_timer()" routine every clocktick
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index d2703cda61ea..6004bb0795e0 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -5,7 +5,7 @@
 
 mainmenu "Linux Kernel Configuration"
 
-config X86
+config X86_32
 	bool
 	default y
 	help
@@ -18,6 +18,10 @@ config SEMAPHORE_SLEEPERS
 	bool
 	default y
 
+config X86
+	bool
+	default y
+
 config MMU
 	bool
 	default y
@@ -151,304 +155,7 @@ config ES7000_CLUSTERED_APIC
 	default y
 	depends on SMP && X86_ES7000 && MPENTIUMIII
 
-if !X86_ELAN
-
-choice
-	prompt "Processor family"
-	default M686
-
-config M386
-	bool "386"
-	---help---
-	  This is the processor type of your CPU. This information is used for
-	  optimizing purposes. In order to compile a kernel that can run on
-	  all x86 CPU types (albeit not optimally fast), you can specify
-	  "386" here.
-
-	  The kernel will not necessarily run on earlier architectures than
-	  the one you have chosen, e.g. a Pentium optimized kernel will run on
-	  a PPro, but not necessarily on a i486.
-
-	  Here are the settings recommended for greatest speed:
-	  - "386" for the AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI
-	  486DLC/DLC2, UMC 486SX-S and NexGen Nx586.  Only "386" kernels
-	  will run on a 386 class machine.
-	  - "486" for the AMD/Cyrix/IBM/Intel 486DX/DX2/DX4 or
-	  SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S.
-	  - "586" for generic Pentium CPUs lacking the TSC
-	  (time stamp counter) register.
-	  - "Pentium-Classic" for the Intel Pentium.
-	  - "Pentium-MMX" for the Intel Pentium MMX.
-	  - "Pentium-Pro" for the Intel Pentium Pro.
-	  - "Pentium-II" for the Intel Pentium II or pre-Coppermine Celeron.
-	  - "Pentium-III" for the Intel Pentium III or Coppermine Celeron.
-	  - "Pentium-4" for the Intel Pentium 4 or P4-based Celeron.
-	  - "K6" for the AMD K6, K6-II and K6-III (aka K6-3D).
-	  - "Athlon" for the AMD K7 family (Athlon/Duron/Thunderbird).
-	  - "Crusoe" for the Transmeta Crusoe series.
-	  - "Efficeon" for the Transmeta Efficeon series.
-	  - "Winchip-C6" for original IDT Winchip.
-	  - "Winchip-2" for IDT Winchip 2.
-	  - "Winchip-2A" for IDT Winchips with 3dNow! capabilities.
-	  - "GeodeGX1" for Geode GX1 (Cyrix MediaGX).
-	  - "CyrixIII/VIA C3" for VIA Cyrix III or VIA C3.
-	  - "VIA C3-2 for VIA C3-2 "Nehemiah" (model 9 and above).
-
-	  If you don't know what to do, choose "386".
-
-config M486
-	bool "486"
-	help
-	  Select this for a 486 series processor, either Intel or one of the
-	  compatible processors from AMD, Cyrix, IBM, or Intel.  Includes DX,
-	  DX2, and DX4 variants; also SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or
-	  U5S.
-
-config M586
-	bool "586/K5/5x86/6x86/6x86MX"
-	help
-	  Select this for an 586 or 686 series processor such as the AMD K5,
-	  the Cyrix 5x86, 6x86 and 6x86MX.  This choice does not
-	  assume the RDTSC (Read Time Stamp Counter) instruction.
-
-config M586TSC
-	bool "Pentium-Classic"
-	help
-	  Select this for a Pentium Classic processor with the RDTSC (Read
-	  Time Stamp Counter) instruction for benchmarking.
-
-config M586MMX
-	bool "Pentium-MMX"
-	help
-	  Select this for a Pentium with the MMX graphics/multimedia
-	  extended instructions.
-
-config M686
-	bool "Pentium-Pro"
-	help
-	  Select this for Intel Pentium Pro chips.  This enables the use of
-	  Pentium Pro extended instructions, and disables the init-time guard
-	  against the f00f bug found in earlier Pentiums.
-
-config MPENTIUMII
-	bool "Pentium-II/Celeron(pre-Coppermine)"
-	help
-	  Select this for Intel chips based on the Pentium-II and
-	  pre-Coppermine Celeron core.  This option enables an unaligned
-	  copy optimization, compiles the kernel with optimization flags
-	  tailored for the chip, and applies any applicable Pentium Pro
-	  optimizations.
-
-config MPENTIUMIII
-	bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon"
-	help
-	  Select this for Intel chips based on the Pentium-III and
-	  Celeron-Coppermine core.  This option enables use of some
-	  extended prefetch instructions in addition to the Pentium II
-	  extensions.
-
-config MPENTIUMM
-	bool "Pentium M"
-	help
-	  Select this for Intel Pentium M (not Pentium-4 M)
-	  notebook chips.
-
-config MPENTIUM4
-	bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/Xeon"
-	help
-	  Select this for Intel Pentium 4 chips.  This includes the
-	  Pentium 4, P4-based Celeron and Xeon, and Pentium-4 M
-	  (not Pentium M) chips.  This option enables compile flags
-	  optimized for the chip, uses the correct cache shift, and
-	  applies any applicable Pentium III optimizations.
-
-config MK6
-	bool "K6/K6-II/K6-III"
-	help
-	  Select this for an AMD K6-family processor.  Enables use of
-	  some extended instructions, and passes appropriate optimization
-	  flags to GCC.
-
-config MK7
-	bool "Athlon/Duron/K7"
-	help
-	  Select this for an AMD Athlon K7-family processor.  Enables use of
-	  some extended instructions, and passes appropriate optimization
-	  flags to GCC.
-
-config MK8
-	bool "Opteron/Athlon64/Hammer/K8"
-	help
-	  Select this for an AMD Opteron or Athlon64 Hammer-family processor.  Enables
-	  use of some extended instructions, and passes appropriate optimization
-	  flags to GCC.
-
-config MCRUSOE
-	bool "Crusoe"
-	help
-	  Select this for a Transmeta Crusoe processor.  Treats the processor
-	  like a 586 with TSC, and sets some GCC optimization flags (like a
-	  Pentium Pro with no alignment requirements).
-
-config MEFFICEON
-	bool "Efficeon"
-	help
-	  Select this for a Transmeta Efficeon processor.
-
-config MWINCHIPC6
-	bool "Winchip-C6"
-	help
-	  Select this for an IDT Winchip C6 chip.  Linux and GCC
-	  treat this chip as a 586TSC with some extended instructions
-	  and alignment requirements.
-
-config MWINCHIP2
-	bool "Winchip-2"
-	help
-	  Select this for an IDT Winchip-2.  Linux and GCC
-	  treat this chip as a 586TSC with some extended instructions
-	  and alignment requirements.
-
-config MWINCHIP3D
-	bool "Winchip-2A/Winchip-3"
-	help
-	  Select this for an IDT Winchip-2A or 3.  Linux and GCC
-	  treat this chip as a 586TSC with some extended instructions
-	  and alignment reqirements.  Also enable out of order memory
-	  stores for this CPU, which can increase performance of some
-	  operations.
-
-config MGEODEGX1
-	bool "GeodeGX1"
-	help
-	  Select this for a Geode GX1 (Cyrix MediaGX) chip.
-
-config MCYRIXIII
-	bool "CyrixIII/VIA-C3"
-	help
-	  Select this for a Cyrix III or C3 chip.  Presently Linux and GCC
-	  treat this chip as a generic 586. Whilst the CPU is 686 class,
-	  it lacks the cmov extension which gcc assumes is present when
-	  generating 686 code.
-	  Note that Nehemiah (Model 9) and above will not boot with this
-	  kernel due to them lacking the 3DNow! instructions used in earlier
-	  incarnations of the CPU.
-
-config MVIAC3_2
-	bool "VIA C3-2 (Nehemiah)"
-	help
-	  Select this for a VIA C3 "Nehemiah". Selecting this enables usage
-	  of SSE and tells gcc to treat the CPU as a 686.
-	  Note, this kernel will not boot on older (pre model 9) C3s.
-
-endchoice
-
-config X86_GENERIC
-       bool "Generic x86 support"
-       help
-	  Instead of just including optimizations for the selected
-	  x86 variant (e.g. PII, Crusoe or Athlon), include some more
-	  generic optimizations as well. This will make the kernel
-	  perform better on x86 CPUs other than that selected.
-
-	  This is really intended for distributors who need more
-	  generic optimizations.
-
-endif
-
-#
-# Define implied options from the CPU selection here
-#
-config X86_CMPXCHG
-	bool
-	depends on !M386
-	default y
-
-config X86_XADD
-	bool
-	depends on !M386
-	default y
-
-config X86_L1_CACHE_SHIFT
-	int
-	default "7" if MPENTIUM4 || X86_GENERIC
-	default "4" if X86_ELAN || M486 || M386
-	default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODEGX1
-	default "6" if MK7 || MK8 || MPENTIUMM
-
-config RWSEM_GENERIC_SPINLOCK
-	bool
-	depends on M386
-	default y
-
-config RWSEM_XCHGADD_ALGORITHM
-	bool
-	depends on !M386
-	default y
-
-config GENERIC_CALIBRATE_DELAY
-	bool
-	default y
-
-config X86_PPRO_FENCE
-	bool
-	depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 || MGEODEGX1
-	default y
-
-config X86_F00F_BUG
-	bool
-	depends on M586MMX || M586TSC || M586 || M486 || M386
-	default y
-
-config X86_WP_WORKS_OK
-	bool
-	depends on !M386
-	default y
-
-config X86_INVLPG
-	bool
-	depends on !M386
-	default y
-
-config X86_BSWAP
-	bool
-	depends on !M386
-	default y
-
-config X86_POPAD_OK
-	bool
-	depends on !M386
-	default y
-
-config X86_ALIGNMENT_16
-	bool
-	depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1
-	default y
-
-config X86_GOOD_APIC
-	bool
-	depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON
-	default y
-
-config X86_INTEL_USERCOPY
-	bool
-	depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON
-	default y
-
-config X86_USE_PPRO_CHECKSUM
-	bool
-	depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON
-	default y
-
-config X86_USE_3DNOW
-	bool
-	depends on MCYRIXIII || MK7
-	default y
-
-config X86_OOSTORE
-	bool
-	depends on (MWINCHIP3D || MWINCHIP2 || MWINCHIPC6) && MTRR
-	default y
+source "arch/i386/Kconfig.cpu"
 
 config HPET_TIMER
 	bool "HPET Timer Support"
@@ -561,11 +268,6 @@ config X86_VISWS_APIC
 	depends on X86_VISWS
 	default y
 
-config X86_TSC
-	bool
-	depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MGEODEGX1) && !X86_NUMAQ
-	default y
-
 config X86_MCE
 	bool "Machine Check Exception"
 	depends on !X86_VOYAGER
@@ -997,7 +699,7 @@ depends on PM && !X86_VISWS
 
 config APM
 	tristate "APM (Advanced Power Management) BIOS support"
-	depends on PM
+	depends on PM && PM_LEGACY
 	---help---
 	  APM is a BIOS specification for saving power using several different
 	  techniques. This is mostly useful for battery powered laptops with
@@ -1295,8 +997,21 @@ source "drivers/Kconfig"
 
 source "fs/Kconfig"
 
+menu "Instrumentation Support"
+	depends on EXPERIMENTAL
+
 source "arch/i386/oprofile/Kconfig"
 
+config KPROBES
+	bool "Kprobes (EXPERIMENTAL)"
+	help
+	  Kprobes allows you to trap at almost any kernel address and
+	  execute a callback function.  register_kprobe() establishes
+	  a probepoint and specifies the callback.  Kprobes is useful
+	  for kernel debugging, non-intrusive instrumentation and testing.
+	  If in doubt, say "N".
+endmenu
+
 source "arch/i386/Kconfig.debug"
 
 source "security/Kconfig"
@@ -1340,8 +1055,3 @@ config X86_TRAMPOLINE
 	bool
 	depends on X86_SMP || (X86_VOYAGER && SMP)
 	default y
-
-config PC
-	bool
-	depends on X86 && !EMBEDDED
-	default y
diff --git a/arch/i386/Kconfig.cpu b/arch/i386/Kconfig.cpu
new file mode 100644
index 000000000000..53bbb3c008ee
--- /dev/null
+++ b/arch/i386/Kconfig.cpu
@@ -0,0 +1,309 @@
+# Put here option for CPU selection and depending optimization
+if !X86_ELAN
+
+choice
+	prompt "Processor family"
+	default M686
+
+config M386
+	bool "386"
+	---help---
+	  This is the processor type of your CPU. This information is used for
+	  optimizing purposes. In order to compile a kernel that can run on
+	  all x86 CPU types (albeit not optimally fast), you can specify
+	  "386" here.
+
+	  The kernel will not necessarily run on earlier architectures than
+	  the one you have chosen, e.g. a Pentium optimized kernel will run on
+	  a PPro, but not necessarily on a i486.
+
+	  Here are the settings recommended for greatest speed:
+	  - "386" for the AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI
+	  486DLC/DLC2, UMC 486SX-S and NexGen Nx586.  Only "386" kernels
+	  will run on a 386 class machine.
+	  - "486" for the AMD/Cyrix/IBM/Intel 486DX/DX2/DX4 or
+	  SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S.
+	  - "586" for generic Pentium CPUs lacking the TSC
+	  (time stamp counter) register.
+	  - "Pentium-Classic" for the Intel Pentium.
+	  - "Pentium-MMX" for the Intel Pentium MMX.
+	  - "Pentium-Pro" for the Intel Pentium Pro.
+	  - "Pentium-II" for the Intel Pentium II or pre-Coppermine Celeron.
+	  - "Pentium-III" for the Intel Pentium III or Coppermine Celeron.
+	  - "Pentium-4" for the Intel Pentium 4 or P4-based Celeron.
+	  - "K6" for the AMD K6, K6-II and K6-III (aka K6-3D).
+	  - "Athlon" for the AMD K7 family (Athlon/Duron/Thunderbird).
+	  - "Crusoe" for the Transmeta Crusoe series.
+	  - "Efficeon" for the Transmeta Efficeon series.
+	  - "Winchip-C6" for original IDT Winchip.
+	  - "Winchip-2" for IDT Winchip 2.
+	  - "Winchip-2A" for IDT Winchips with 3dNow! capabilities.
+	  - "GeodeGX1" for Geode GX1 (Cyrix MediaGX).
+	  - "CyrixIII/VIA C3" for VIA Cyrix III or VIA C3.
+	  - "VIA C3-2 for VIA C3-2 "Nehemiah" (model 9 and above).
+
+	  If you don't know what to do, choose "386".
+
+config M486
+	bool "486"
+	help
+	  Select this for a 486 series processor, either Intel or one of the
+	  compatible processors from AMD, Cyrix, IBM, or Intel.  Includes DX,
+	  DX2, and DX4 variants; also SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or
+	  U5S.
+
+config M586
+	bool "586/K5/5x86/6x86/6x86MX"
+	help
+	  Select this for an 586 or 686 series processor such as the AMD K5,
+	  the Cyrix 5x86, 6x86 and 6x86MX.  This choice does not
+	  assume the RDTSC (Read Time Stamp Counter) instruction.
+
+config M586TSC
+	bool "Pentium-Classic"
+	help
+	  Select this for a Pentium Classic processor with the RDTSC (Read
+	  Time Stamp Counter) instruction for benchmarking.
+
+config M586MMX
+	bool "Pentium-MMX"
+	help
+	  Select this for a Pentium with the MMX graphics/multimedia
+	  extended instructions.
+
+config M686
+	bool "Pentium-Pro"
+	help
+	  Select this for Intel Pentium Pro chips.  This enables the use of
+	  Pentium Pro extended instructions, and disables the init-time guard
+	  against the f00f bug found in earlier Pentiums.
+
+config MPENTIUMII
+	bool "Pentium-II/Celeron(pre-Coppermine)"
+	help
+	  Select this for Intel chips based on the Pentium-II and
+	  pre-Coppermine Celeron core.  This option enables an unaligned
+	  copy optimization, compiles the kernel with optimization flags
+	  tailored for the chip, and applies any applicable Pentium Pro
+	  optimizations.
+
+config MPENTIUMIII
+	bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon"
+	help
+	  Select this for Intel chips based on the Pentium-III and
+	  Celeron-Coppermine core.  This option enables use of some
+	  extended prefetch instructions in addition to the Pentium II
+	  extensions.
+
+config MPENTIUMM
+	bool "Pentium M"
+	help
+	  Select this for Intel Pentium M (not Pentium-4 M)
+	  notebook chips.
+
+config MPENTIUM4
+	bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/Xeon"
+	help
+	  Select this for Intel Pentium 4 chips.  This includes the
+	  Pentium 4, P4-based Celeron and Xeon, and Pentium-4 M
+	  (not Pentium M) chips.  This option enables compile flags
+	  optimized for the chip, uses the correct cache shift, and
+	  applies any applicable Pentium III optimizations.
+
+config MK6
+	bool "K6/K6-II/K6-III"
+	help
+	  Select this for an AMD K6-family processor.  Enables use of
+	  some extended instructions, and passes appropriate optimization
+	  flags to GCC.
+
+config MK7
+	bool "Athlon/Duron/K7"
+	help
+	  Select this for an AMD Athlon K7-family processor.  Enables use of
+	  some extended instructions, and passes appropriate optimization
+	  flags to GCC.
+
+config MK8
+	bool "Opteron/Athlon64/Hammer/K8"
+	help
+	  Select this for an AMD Opteron or Athlon64 Hammer-family processor.  Enables
+	  use of some extended instructions, and passes appropriate optimization
+	  flags to GCC.
+
+config MCRUSOE
+	bool "Crusoe"
+	help
+	  Select this for a Transmeta Crusoe processor.  Treats the processor
+	  like a 586 with TSC, and sets some GCC optimization flags (like a
+	  Pentium Pro with no alignment requirements).
+
+config MEFFICEON
+	bool "Efficeon"
+	help
+	  Select this for a Transmeta Efficeon processor.
+
+config MWINCHIPC6
+	bool "Winchip-C6"
+	help
+	  Select this for an IDT Winchip C6 chip.  Linux and GCC
+	  treat this chip as a 586TSC with some extended instructions
+	  and alignment requirements.
+
+config MWINCHIP2
+	bool "Winchip-2"
+	help
+	  Select this for an IDT Winchip-2.  Linux and GCC
+	  treat this chip as a 586TSC with some extended instructions
+	  and alignment requirements.
+
+config MWINCHIP3D
+	bool "Winchip-2A/Winchip-3"
+	help
+	  Select this for an IDT Winchip-2A or 3.  Linux and GCC
+	  treat this chip as a 586TSC with some extended instructions
+	  and alignment reqirements.  Also enable out of order memory
+	  stores for this CPU, which can increase performance of some
+	  operations.
+
+config MGEODEGX1
+	bool "GeodeGX1"
+	help
+	  Select this for a Geode GX1 (Cyrix MediaGX) chip.
+
+config MCYRIXIII
+	bool "CyrixIII/VIA-C3"
+	help
+	  Select this for a Cyrix III or C3 chip.  Presently Linux and GCC
+	  treat this chip as a generic 586. Whilst the CPU is 686 class,
+	  it lacks the cmov extension which gcc assumes is present when
+	  generating 686 code.
+	  Note that Nehemiah (Model 9) and above will not boot with this
+	  kernel due to them lacking the 3DNow! instructions used in earlier
+	  incarnations of the CPU.
+
+config MVIAC3_2
+	bool "VIA C3-2 (Nehemiah)"
+	help
+	  Select this for a VIA C3 "Nehemiah". Selecting this enables usage
+	  of SSE and tells gcc to treat the CPU as a 686.
+	  Note, this kernel will not boot on older (pre model 9) C3s.
+
+endchoice
+
+config X86_GENERIC
+       bool "Generic x86 support"
+       help
+	  Instead of just including optimizations for the selected
+	  x86 variant (e.g. PII, Crusoe or Athlon), include some more
+	  generic optimizations as well. This will make the kernel
+	  perform better on x86 CPUs other than that selected.
+
+	  This is really intended for distributors who need more
+	  generic optimizations.
+
+endif
+
+#
+# Define implied options from the CPU selection here
+#
+config X86_CMPXCHG
+	bool
+	depends on !M386
+	default y
+
+config X86_XADD
+	bool
+	depends on !M386
+	default y
+
+config X86_L1_CACHE_SHIFT
+	int
+	default "7" if MPENTIUM4 || X86_GENERIC
+	default "4" if X86_ELAN || M486 || M386
+	default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODEGX1
+	default "6" if MK7 || MK8 || MPENTIUMM
+
+config RWSEM_GENERIC_SPINLOCK
+	bool
+	depends on M386
+	default y
+
+config RWSEM_XCHGADD_ALGORITHM
+	bool
+	depends on !M386
+	default y
+
+config GENERIC_CALIBRATE_DELAY
+	bool
+	default y
+
+config X86_PPRO_FENCE
+	bool
+	depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 || MGEODEGX1
+	default y
+
+config X86_F00F_BUG
+	bool
+	depends on M586MMX || M586TSC || M586 || M486 || M386
+	default y
+
+config X86_WP_WORKS_OK
+	bool
+	depends on !M386
+	default y
+
+config X86_INVLPG
+	bool
+	depends on !M386
+	default y
+
+config X86_BSWAP
+	bool
+	depends on !M386
+	default y
+
+config X86_POPAD_OK
+	bool
+	depends on !M386
+	default y
+
+config X86_CMPXCHG64
+	bool
+	depends on !M386 && !M486
+	default y
+
+config X86_ALIGNMENT_16
+	bool
+	depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1
+	default y
+
+config X86_GOOD_APIC
+	bool
+	depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON
+	default y
+
+config X86_INTEL_USERCOPY
+	bool
+	depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON
+	default y
+
+config X86_USE_PPRO_CHECKSUM
+	bool
+	depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON
+	default y
+
+config X86_USE_3DNOW
+	bool
+	depends on MCYRIXIII || MK7
+	default y
+
+config X86_OOSTORE
+	bool
+	depends on (MWINCHIP3D || MWINCHIP2 || MWINCHIPC6) && MTRR
+	default y
+
+config X86_TSC
+	bool
+	depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MGEODEGX1) && !X86_NUMAQ
+	default y
diff --git a/arch/i386/Kconfig.debug b/arch/i386/Kconfig.debug
index 5228c40a6fb2..c48b424dd640 100644
--- a/arch/i386/Kconfig.debug
+++ b/arch/i386/Kconfig.debug
@@ -22,16 +22,6 @@ config DEBUG_STACKOVERFLOW
 	  This option will cause messages to be printed if free stack space
 	  drops below a certain limit.
 
-config KPROBES
-	bool "Kprobes"
-	depends on DEBUG_KERNEL
-	help
-	  Kprobes allows you to trap at almost any kernel address and
-	  execute a callback function.  register_kprobe() establishes
-	  a probepoint and specifies the callback.  Kprobes is useful
-	  for kernel debugging, non-intrusive instrumentation and testing.
-	  If in doubt, say "N".
-
 config DEBUG_STACK_USAGE
 	bool "Stack utilization instrumentation"
 	depends on DEBUG_KERNEL
diff --git a/arch/i386/Makefile b/arch/i386/Makefile
index 09951990a622..d121ea18460f 100644
--- a/arch/i386/Makefile
+++ b/arch/i386/Makefile
@@ -34,35 +34,8 @@ CFLAGS += -pipe -msoft-float
 # prevent gcc from keeping the stack 16 byte aligned
 CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2)
 
-align := $(cc-option-align)
-cflags-$(CONFIG_M386)		+= -march=i386
-cflags-$(CONFIG_M486)		+= -march=i486
-cflags-$(CONFIG_M586)		+= -march=i586
-cflags-$(CONFIG_M586TSC)	+= -march=i586
-cflags-$(CONFIG_M586MMX)	+= $(call cc-option,-march=pentium-mmx,-march=i586)
-cflags-$(CONFIG_M686)		+= -march=i686
-cflags-$(CONFIG_MPENTIUMII)	+= -march=i686 $(call cc-option,-mtune=pentium2)
-cflags-$(CONFIG_MPENTIUMIII)	+= -march=i686 $(call cc-option,-mtune=pentium3)
-cflags-$(CONFIG_MPENTIUMM)	+= -march=i686 $(call cc-option,-mtune=pentium3)
-cflags-$(CONFIG_MPENTIUM4)	+= -march=i686 $(call cc-option,-mtune=pentium4)
-cflags-$(CONFIG_MK6)		+= -march=k6
-# Please note, that patches that add -march=athlon-xp and friends are pointless.
-# They make zero difference whatsosever to performance at this time.
-cflags-$(CONFIG_MK7)		+= $(call cc-option,-march=athlon,-march=i686 $(align)-functions=4)
-cflags-$(CONFIG_MK8)		+= $(call cc-option,-march=k8,$(call cc-option,-march=athlon,-march=i686 $(align)-functions=4))
-cflags-$(CONFIG_MCRUSOE)	+= -march=i686 $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
-cflags-$(CONFIG_MEFFICEON)	+= -march=i686 $(call cc-option,-mtune=pentium3) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
-cflags-$(CONFIG_MWINCHIPC6)	+= $(call cc-option,-march=winchip-c6,-march=i586)
-cflags-$(CONFIG_MWINCHIP2)	+= $(call cc-option,-march=winchip2,-march=i586)
-cflags-$(CONFIG_MWINCHIP3D)	+= $(call cc-option,-march=winchip2,-march=i586)
-cflags-$(CONFIG_MCYRIXIII)	+= $(call cc-option,-march=c3,-march=i486) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
-cflags-$(CONFIG_MVIAC3_2)	+= $(call cc-option,-march=c3-2,-march=i686)
-
-# AMD Elan support
-cflags-$(CONFIG_X86_ELAN)	+= -march=i486
-
-# Geode GX1 support
-cflags-$(CONFIG_MGEODEGX1)		+= $(call cc-option,-march=pentium-mmx,-march=i486)
+# CPU-specific tuning. Anything which can be shared with UML should go here.
+include $(srctree)/arch/i386/Makefile.cpu
 
 # -mregparm=3 works ok on gcc-3.0 and later
 #
diff --git a/arch/i386/Makefile.cpu b/arch/i386/Makefile.cpu
new file mode 100644
index 000000000000..8e51456df23d
--- /dev/null
+++ b/arch/i386/Makefile.cpu
@@ -0,0 +1,41 @@
+# CPU tuning section - shared with UML.
+# Must change only cflags-y (or [yn]), not CFLAGS! That makes a difference for UML.
+
+#-mtune exists since gcc 3.4, and some -mcpu flavors didn't exist in gcc 2.95.
+HAS_MTUNE	:= $(call cc-option-yn, -mtune=i386)
+ifeq ($(HAS_MTUNE),y)
+tune		= $(call cc-option,-mtune=$(1),)
+else
+tune		= $(call cc-option,-mcpu=$(1),)
+endif
+
+align := $(cc-option-align)
+cflags-$(CONFIG_M386)		+= -march=i386
+cflags-$(CONFIG_M486)		+= -march=i486
+cflags-$(CONFIG_M586)		+= -march=i586
+cflags-$(CONFIG_M586TSC)	+= -march=i586
+cflags-$(CONFIG_M586MMX)	+= $(call cc-option,-march=pentium-mmx,-march=i586)
+cflags-$(CONFIG_M686)		+= -march=i686
+cflags-$(CONFIG_MPENTIUMII)	+= -march=i686 $(call tune,pentium2)
+cflags-$(CONFIG_MPENTIUMIII)	+= -march=i686 $(call tune,pentium3)
+cflags-$(CONFIG_MPENTIUMM)	+= -march=i686 $(call tune,pentium3)
+cflags-$(CONFIG_MPENTIUM4)	+= -march=i686 $(call tune,pentium4)
+cflags-$(CONFIG_MK6)		+= -march=k6
+# Please note, that patches that add -march=athlon-xp and friends are pointless.
+# They make zero difference whatsosever to performance at this time.
+cflags-$(CONFIG_MK7)		+= $(call cc-option,-march=athlon,-march=i686 $(align)-functions=4)
+cflags-$(CONFIG_MK8)		+= $(call cc-option,-march=k8,$(call cc-option,-march=athlon,-march=i686 $(align)-functions=4))
+cflags-$(CONFIG_MCRUSOE)	+= -march=i686 $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
+cflags-$(CONFIG_MEFFICEON)	+= -march=i686 $(call tune,pentium3) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
+cflags-$(CONFIG_MWINCHIPC6)	+= $(call cc-option,-march=winchip-c6,-march=i586)
+cflags-$(CONFIG_MWINCHIP2)	+= $(call cc-option,-march=winchip2,-march=i586)
+cflags-$(CONFIG_MWINCHIP3D)	+= $(call cc-option,-march=winchip2,-march=i586)
+cflags-$(CONFIG_MCYRIXIII)	+= $(call cc-option,-march=c3,-march=i486) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
+cflags-$(CONFIG_MVIAC3_2)	+= $(call cc-option,-march=c3-2,-march=i686)
+
+# AMD Elan support
+cflags-$(CONFIG_X86_ELAN)	+= -march=i486
+
+# Geode GX1 support
+cflags-$(CONFIG_MGEODEGX1)		+= $(call cc-option,-march=pentium-mmx,-march=i486)
+
diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c
index a63351c085c6..447fa9e33ffb 100644
--- a/arch/i386/kernel/acpi/boot.c
+++ b/arch/i386/kernel/acpi/boot.c
@@ -27,30 +27,26 @@
 #include <linux/config.h>
 #include <linux/acpi.h>
 #include <linux/efi.h>
-#include <linux/irq.h>
 #include <linux/module.h>
 #include <linux/dmi.h>
+#include <linux/irq.h>
 
 #include <asm/pgtable.h>
 #include <asm/io_apic.h>
 #include <asm/apic.h>
 #include <asm/io.h>
-#include <asm/irq.h>
 #include <asm/mpspec.h>
 
 #ifdef	CONFIG_X86_64
 
-static inline void acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-}
 extern void __init clustered_apic_check(void);
-static inline int ioapic_setup_disabled(void)
-{
-	return 0;
-}
 
+extern int gsi_irq_sharing(int gsi);
 #include <asm/proto.h>
 
+static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) { return 0; }
+
+
 #else				/* X86 */
 
 #ifdef	CONFIG_X86_LOCAL_APIC
@@ -58,6 +54,8 @@ static inline int ioapic_setup_disabled(void)
 #include <mach_mpparse.h>
 #endif				/* CONFIG_X86_LOCAL_APIC */
 
+static inline int gsi_irq_sharing(int gsi) { return gsi; }
+
 #endif				/* X86 */
 
 #define BAD_MADT_ENTRY(entry, end) (					    \
@@ -250,9 +248,7 @@ acpi_parse_lapic(acpi_table_entry_header * header, const unsigned long end)
 
 	acpi_table_print_madt_entry(header);
 
-	/* no utility in registering a disabled processor */
-	if (processor->flags.enabled == 0)
-		return 0;
+	/* Register even disabled CPUs for cpu hotplug */
 
 	x86_acpiid_to_apicid[processor->acpi_id] = processor->id;
 
@@ -460,7 +456,7 @@ int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
 		*irq = IO_APIC_VECTOR(gsi);
 	else
 #endif
-		*irq = gsi;
+		*irq = gsi_irq_sharing(gsi);
 	return 0;
 }
 
@@ -544,7 +540,7 @@ acpi_scan_rsdp(unsigned long start, unsigned long length)
 	 * RSDP signature.
 	 */
 	for (offset = 0; offset < length; offset += 16) {
-		if (strncmp((char *)(start + offset), "RSD PTR ", sig_len))
+		if (strncmp((char *)(phys_to_virt(start) + offset), "RSD PTR ", sig_len))
 			continue;
 		return (start + offset);
 	}
@@ -642,6 +638,13 @@ static int __init acpi_parse_fadt(unsigned long phys, unsigned long size)
 			return 0;
 
 		pmtmr_ioport = fadt->xpm_tmr_blk.address;
+		/*
+		 * "X" fields are optional extensions to the original V1.0
+		 * fields, so we must selectively expand V1.0 fields if the
+		 * corresponding X field is zero.
+	 	 */
+		if (!pmtmr_ioport)
+			pmtmr_ioport = fadt->V1_pm_tmr_blk;
 	} else {
 		/* FADT rev. 1 */
 		pmtmr_ioport = fadt->V1_pm_tmr_blk;
diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c
index a22a866de8f9..496a2c9909fe 100644
--- a/arch/i386/kernel/apic.c
+++ b/arch/i386/kernel/apic.c
@@ -18,7 +18,6 @@
 #include <linux/init.h>
 
 #include <linux/mm.h>
-#include <linux/irq.h>
 #include <linux/delay.h>
 #include <linux/bootmem.h>
 #include <linux/smp_lock.h>
@@ -560,14 +559,20 @@ void __devinit setup_local_APIC(void)
  * If Linux enabled the LAPIC against the BIOS default
  * disable it down before re-entering the BIOS on shutdown.
  * Otherwise the BIOS may get confused and not power-off.
+ * Additionally clear all LVT entries before disable_local_APIC
+ * for the case where Linux didn't enable the LAPIC.
  */
 void lapic_shutdown(void)
 {
-	if (!cpu_has_apic || !enabled_via_apicbase)
+	if (!cpu_has_apic)
 		return;
 
 	local_irq_disable();
-	disable_local_APIC();
+	clear_local_APIC();
+
+	if (enabled_via_apicbase)
+		disable_local_APIC();
+
 	local_irq_enable();
 }
 
@@ -1047,10 +1052,11 @@ static unsigned int calibration_result;
 
 void __init setup_boot_APIC_clock(void)
 {
+	unsigned long flags;
 	apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n");
 	using_apic_timer = 1;
 
-	local_irq_disable();
+	local_irq_save(flags);
 
 	calibration_result = calibrate_APIC_clock();
 	/*
@@ -1058,7 +1064,7 @@ void __init setup_boot_APIC_clock(void)
 	 */
 	setup_APIC_timer(calibration_result);
 
-	local_irq_enable();
+	local_irq_restore(flags);
 }
 
 void __devinit setup_secondary_APIC_clock(void)
diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c
index d7811c4e8b50..1e60acbed3c1 100644
--- a/arch/i386/kernel/apm.c
+++ b/arch/i386/kernel/apm.c
@@ -218,6 +218,7 @@
 #include <linux/time.h>
 #include <linux/sched.h>
 #include <linux/pm.h>
+#include <linux/pm_legacy.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/smp.h>
@@ -447,8 +448,7 @@ static char *	apm_event_name[] = {
 	"system standby resume",
 	"capabilities change"
 };
-#define NR_APM_EVENT_NAME	\
-		(sizeof(apm_event_name) / sizeof(apm_event_name[0]))
+#define NR_APM_EVENT_NAME ARRAY_SIZE(apm_event_name)
 
 typedef struct lookup_t {
 	int	key;
@@ -479,7 +479,7 @@ static const lookup_t error_table[] = {
 	{ APM_NO_ERROR,		"BIOS did not set a return code" },
 	{ APM_NOT_PRESENT,	"No APM present" }
 };
-#define ERROR_COUNT	(sizeof(error_table)/sizeof(lookup_t))
+#define ERROR_COUNT	ARRAY_SIZE(error_table)
 
 /**
  *	apm_error	-	display an APM error
@@ -597,12 +597,14 @@ static u8 apm_bios_call(u32 func, u32 ebx_in, u32 ecx_in,
 	cpumask_t		cpus;
 	int			cpu;
 	struct desc_struct	save_desc_40;
+	struct desc_struct	*gdt;
 
 	cpus = apm_save_cpus();
 	
 	cpu = get_cpu();
-	save_desc_40 = per_cpu(cpu_gdt_table, cpu)[0x40 / 8];
-	per_cpu(cpu_gdt_table, cpu)[0x40 / 8] = bad_bios_desc;
+	gdt = get_cpu_gdt_table(cpu);
+	save_desc_40 = gdt[0x40 / 8];
+	gdt[0x40 / 8] = bad_bios_desc;
 
 	local_save_flags(flags);
 	APM_DO_CLI;
@@ -610,7 +612,7 @@ static u8 apm_bios_call(u32 func, u32 ebx_in, u32 ecx_in,
 	apm_bios_call_asm(func, ebx_in, ecx_in, eax, ebx, ecx, edx, esi);
 	APM_DO_RESTORE_SEGS;
 	local_irq_restore(flags);
-	per_cpu(cpu_gdt_table, cpu)[0x40 / 8] = save_desc_40;
+	gdt[0x40 / 8] = save_desc_40;
 	put_cpu();
 	apm_restore_cpus(cpus);
 	
@@ -639,13 +641,14 @@ static u8 apm_bios_call_simple(u32 func, u32 ebx_in, u32 ecx_in, u32 *eax)
 	cpumask_t		cpus;
 	int			cpu;
 	struct desc_struct	save_desc_40;
-
+	struct desc_struct	*gdt;
 
 	cpus = apm_save_cpus();
 	
 	cpu = get_cpu();
-	save_desc_40 = per_cpu(cpu_gdt_table, cpu)[0x40 / 8];
-	per_cpu(cpu_gdt_table, cpu)[0x40 / 8] = bad_bios_desc;
+	gdt = get_cpu_gdt_table(cpu);
+	save_desc_40 = gdt[0x40 / 8];
+	gdt[0x40 / 8] = bad_bios_desc;
 
 	local_save_flags(flags);
 	APM_DO_CLI;
@@ -653,7 +656,7 @@ static u8 apm_bios_call_simple(u32 func, u32 ebx_in, u32 ecx_in, u32 *eax)
 	error = apm_bios_call_simple_asm(func, ebx_in, ecx_in, eax);
 	APM_DO_RESTORE_SEGS;
 	local_irq_restore(flags);
-	__get_cpu_var(cpu_gdt_table)[0x40 / 8] = save_desc_40;
+	gdt[0x40 / 8] = save_desc_40;
 	put_cpu();
 	apm_restore_cpus(cpus);
 	return error;
@@ -767,8 +770,26 @@ static int set_system_power_state(u_short state)
 static int apm_do_idle(void)
 {
 	u32	eax;
+	u8	ret = 0;
+	int	idled = 0;
+	int	polling;
+
+	polling = test_thread_flag(TIF_POLLING_NRFLAG);
+	if (polling) {
+		clear_thread_flag(TIF_POLLING_NRFLAG);
+		smp_mb__after_clear_bit();
+	}
+	if (!need_resched()) {
+		idled = 1;
+		ret = apm_bios_call_simple(APM_FUNC_IDLE, 0, 0, &eax);
+	}
+	if (polling)
+		set_thread_flag(TIF_POLLING_NRFLAG);
+
+	if (!idled)
+		return 0;
 
-	if (apm_bios_call_simple(APM_FUNC_IDLE, 0, 0, &eax)) {
+	if (ret) {
 		static unsigned long t;
 
 		/* This always fails on some SMP boards running UP kernels.
@@ -2295,35 +2316,36 @@ static int __init apm_init(void)
 	apm_bios_entry.segment = APM_CS;
 
 	for (i = 0; i < NR_CPUS; i++) {
-		set_base(per_cpu(cpu_gdt_table, i)[APM_CS >> 3],
+		struct desc_struct *gdt = get_cpu_gdt_table(i);
+		set_base(gdt[APM_CS >> 3],
 			 __va((unsigned long)apm_info.bios.cseg << 4));
-		set_base(per_cpu(cpu_gdt_table, i)[APM_CS_16 >> 3],
+		set_base(gdt[APM_CS_16 >> 3],
 			 __va((unsigned long)apm_info.bios.cseg_16 << 4));
-		set_base(per_cpu(cpu_gdt_table, i)[APM_DS >> 3],
+		set_base(gdt[APM_DS >> 3],
 			 __va((unsigned long)apm_info.bios.dseg << 4));
 #ifndef APM_RELAX_SEGMENTS
 		if (apm_info.bios.version == 0x100) {
 #endif
 			/* For ASUS motherboard, Award BIOS rev 110 (and others?) */
-			_set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS >> 3], 64 * 1024 - 1);
+			_set_limit((char *)&gdt[APM_CS >> 3], 64 * 1024 - 1);
 			/* For some unknown machine. */
-			_set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS_16 >> 3], 64 * 1024 - 1);
+			_set_limit((char *)&gdt[APM_CS_16 >> 3], 64 * 1024 - 1);
 			/* For the DEC Hinote Ultra CT475 (and others?) */
-			_set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_DS >> 3], 64 * 1024 - 1);
+			_set_limit((char *)&gdt[APM_DS >> 3], 64 * 1024 - 1);
 #ifndef APM_RELAX_SEGMENTS
 		} else {
-			_set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS >> 3],
+			_set_limit((char *)&gdt[APM_CS >> 3],
 				(apm_info.bios.cseg_len - 1) & 0xffff);
-			_set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS_16 >> 3],
+			_set_limit((char *)&gdt[APM_CS_16 >> 3],
 				(apm_info.bios.cseg_16_len - 1) & 0xffff);
-			_set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_DS >> 3],
+			_set_limit((char *)&gdt[APM_DS >> 3],
 				(apm_info.bios.dseg_len - 1) & 0xffff);
 		      /* workaround for broken BIOSes */
 	                if (apm_info.bios.cseg_len <= apm_info.bios.offset)
-        	                _set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS >> 3], 64 * 1024 -1);
+        	                _set_limit((char *)&gdt[APM_CS >> 3], 64 * 1024 -1);
                        if (apm_info.bios.dseg_len <= 0x40) { /* 0x40 * 4kB == 64kB */
                         	/* for the BIOS that assumes granularity = 1 */
-                        	per_cpu(cpu_gdt_table, i)[APM_DS >> 3].b |= 0x800000;
+                        	gdt[APM_DS >> 3].b |= 0x800000;
                         	printk(KERN_NOTICE "apm: we set the granularity of dseg.\n");
         	        }
 		}
diff --git a/arch/i386/kernel/cpu/amd.c b/arch/i386/kernel/cpu/amd.c
index 73aeaf5a9d4e..e344ef88cfcd 100644
--- a/arch/i386/kernel/cpu/amd.c
+++ b/arch/i386/kernel/cpu/amd.c
@@ -28,6 +28,22 @@ static void __init init_amd(struct cpuinfo_x86 *c)
 	int mbytes = num_physpages >> (20-PAGE_SHIFT);
 	int r;
 
+#ifdef CONFIG_SMP
+	unsigned long long value;
+
+	/* Disable TLB flush filter by setting HWCR.FFDIS on K8
+	 * bit 6 of msr C001_0015
+	 *
+	 * Errata 63 for SH-B3 steppings
+	 * Errata 122 for all steppings (F+ have it disabled by default)
+	 */
+	if (c->x86 == 15) {
+		rdmsrl(MSR_K7_HWCR, value);
+		value |= 1 << 6;
+		wrmsrl(MSR_K7_HWCR, value);
+	}
+#endif
+
 	/*
 	 *	FIXME: We should handle the K5 here. Set up the write
 	 *	range and also turn on MSR 83 bits 4 and 31 (write alloc,
@@ -190,9 +206,9 @@ static void __init init_amd(struct cpuinfo_x86 *c)
 	display_cacheinfo(c);
 
 	if (cpuid_eax(0x80000000) >= 0x80000008) {
-		c->x86_num_cores = (cpuid_ecx(0x80000008) & 0xff) + 1;
-		if (c->x86_num_cores & (c->x86_num_cores - 1))
-			c->x86_num_cores = 1;
+		c->x86_max_cores = (cpuid_ecx(0x80000008) & 0xff) + 1;
+		if (c->x86_max_cores & (c->x86_max_cores - 1))
+			c->x86_max_cores = 1;
 	}
 
 #ifdef CONFIG_X86_HT
@@ -201,15 +217,15 @@ static void __init init_amd(struct cpuinfo_x86 *c)
 	 * distingush the cores.  Assumes number of cores is a power
 	 * of two.
 	 */
-	if (c->x86_num_cores > 1) {
+	if (c->x86_max_cores > 1) {
 		int cpu = smp_processor_id();
 		unsigned bits = 0;
-		while ((1 << bits) < c->x86_num_cores)
+		while ((1 << bits) < c->x86_max_cores)
 			bits++;
 		cpu_core_id[cpu] = phys_proc_id[cpu] & ((1<<bits)-1);
 		phys_proc_id[cpu] >>= bits;
 		printk(KERN_INFO "CPU %d(%d) -> Core %d\n",
-		       cpu, c->x86_num_cores, cpu_core_id[cpu]);
+		       cpu, c->x86_max_cores, cpu_core_id[cpu]);
 	}
 #endif
 }
diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c
index 9ad43be9a01f..31e344b26bae 100644
--- a/arch/i386/kernel/cpu/common.c
+++ b/arch/i386/kernel/cpu/common.c
@@ -30,8 +30,6 @@ static int disable_x86_serial_nr __devinitdata = 1;
 
 struct cpu_dev * cpu_devs[X86_VENDOR_NUM] = {};
 
-extern void mcheck_init(struct cpuinfo_x86 *c);
-
 extern int disable_pse;
 
 static void default_init(struct cpuinfo_x86 * c)
@@ -233,10 +231,10 @@ static void __init early_cpu_detect(void)
 		cpuid(0x00000001, &tfms, &misc, &junk, &cap0);
 		c->x86 = (tfms >> 8) & 15;
 		c->x86_model = (tfms >> 4) & 15;
-		if (c->x86 == 0xf) {
+		if (c->x86 == 0xf)
 			c->x86 += (tfms >> 20) & 0xff;
+		if (c->x86 >= 0x6)
 			c->x86_model += ((tfms >> 16) & 0xF) << 4;
-		}
 		c->x86_mask = tfms & 15;
 		if (cap0 & (1<<19))
 			c->x86_cache_alignment = ((misc >> 8) & 0xff) * 8;
@@ -335,7 +333,7 @@ void __devinit identify_cpu(struct cpuinfo_x86 *c)
 	c->x86_model = c->x86_mask = 0;	/* So far unknown... */
 	c->x86_vendor_id[0] = '\0'; /* Unset */
 	c->x86_model_id[0] = '\0';  /* Unset */
-	c->x86_num_cores = 1;
+	c->x86_max_cores = 1;
 	memset(&c->x86_capability, 0, sizeof c->x86_capability);
 
 	if (!have_cpuid_p()) {
@@ -429,9 +427,8 @@ void __devinit identify_cpu(struct cpuinfo_x86 *c)
 	}
 
 	/* Init Machine Check Exception if available. */
-#ifdef CONFIG_X86_MCE
 	mcheck_init(c);
-#endif
+
 	if (c == &boot_cpu_data)
 		sysenter_setup();
 	enable_sep_cpu();
@@ -446,52 +443,44 @@ void __devinit identify_cpu(struct cpuinfo_x86 *c)
 void __devinit detect_ht(struct cpuinfo_x86 *c)
 {
 	u32 	eax, ebx, ecx, edx;
-	int 	index_msb, tmp;
+	int 	index_msb, core_bits;
 	int 	cpu = smp_processor_id();
 
+	cpuid(1, &eax, &ebx, &ecx, &edx);
+
+	c->apicid = phys_pkg_id((ebx >> 24) & 0xFF, 0);
+
 	if (!cpu_has(c, X86_FEATURE_HT) || cpu_has(c, X86_FEATURE_CMP_LEGACY))
 		return;
 
-	cpuid(1, &eax, &ebx, &ecx, &edx);
 	smp_num_siblings = (ebx & 0xff0000) >> 16;
 
 	if (smp_num_siblings == 1) {
 		printk(KERN_INFO  "CPU: Hyper-Threading is disabled\n");
 	} else if (smp_num_siblings > 1 ) {
-		index_msb = 31;
 
 		if (smp_num_siblings > NR_CPUS) {
 			printk(KERN_WARNING "CPU: Unsupported number of the siblings %d", smp_num_siblings);
 			smp_num_siblings = 1;
 			return;
 		}
-		tmp = smp_num_siblings;
-		while ((tmp & 0x80000000 ) == 0) {
-			tmp <<=1 ;
-			index_msb--;
-		}
-		if (smp_num_siblings & (smp_num_siblings - 1))
-			index_msb++;
+
+		index_msb = get_count_order(smp_num_siblings);
 		phys_proc_id[cpu] = phys_pkg_id((ebx >> 24) & 0xFF, index_msb);
 
 		printk(KERN_INFO  "CPU: Physical Processor ID: %d\n",
 		       phys_proc_id[cpu]);
 
-		smp_num_siblings = smp_num_siblings / c->x86_num_cores;
+		smp_num_siblings = smp_num_siblings / c->x86_max_cores;
 
-		tmp = smp_num_siblings;
-		index_msb = 31;
-		while ((tmp & 0x80000000) == 0) {
-			tmp <<=1 ;
-			index_msb--;
-		}
+		index_msb = get_count_order(smp_num_siblings) ;
 
-		if (smp_num_siblings & (smp_num_siblings - 1))
-			index_msb++;
+		core_bits = get_count_order(c->x86_max_cores);
 
-		cpu_core_id[cpu] = phys_pkg_id((ebx >> 24) & 0xFF, index_msb);
+		cpu_core_id[cpu] = phys_pkg_id((ebx >> 24) & 0xFF, index_msb) &
+					       ((1 << core_bits) - 1);
 
-		if (c->x86_num_cores > 1)
+		if (c->x86_max_cores > 1)
 			printk(KERN_INFO  "CPU: Processor Core ID: %d\n",
 			       cpu_core_id[cpu]);
 	}
@@ -573,6 +562,7 @@ void __devinit cpu_init(void)
 	int cpu = smp_processor_id();
 	struct tss_struct * t = &per_cpu(init_tss, cpu);
 	struct thread_struct *thread = &current->thread;
+	struct desc_struct *gdt = get_cpu_gdt_table(cpu);
 	__u32 stk16_off = (__u32)&per_cpu(cpu_16bit_stack, cpu);
 
 	if (cpu_test_and_set(cpu, cpu_initialized)) {
@@ -594,24 +584,16 @@ void __devinit cpu_init(void)
 	 * Initialize the per-CPU GDT with the boot GDT,
 	 * and set up the GDT descriptor:
 	 */
-	memcpy(&per_cpu(cpu_gdt_table, cpu), cpu_gdt_table,
-	       GDT_SIZE);
+ 	memcpy(gdt, cpu_gdt_table, GDT_SIZE);
 
 	/* Set up GDT entry for 16bit stack */
-	*(__u64 *)&(per_cpu(cpu_gdt_table, cpu)[GDT_ENTRY_ESPFIX_SS]) |=
+ 	*(__u64 *)(&gdt[GDT_ENTRY_ESPFIX_SS]) |=
 		((((__u64)stk16_off) << 16) & 0x000000ffffff0000ULL) |
 		((((__u64)stk16_off) << 32) & 0xff00000000000000ULL) |
 		(CPU_16BIT_STACK_SIZE - 1);
 
 	cpu_gdt_descr[cpu].size = GDT_SIZE - 1;
-	cpu_gdt_descr[cpu].address =
-	    (unsigned long)&per_cpu(cpu_gdt_table, cpu);
-
-	/*
-	 * Set up the per-thread TLS descriptor cache:
-	 */
-	memcpy(thread->tls_array, &per_cpu(cpu_gdt_table, cpu),
-		GDT_ENTRY_TLS_ENTRIES * 8);
+ 	cpu_gdt_descr[cpu].address = (unsigned long)gdt;
 
 	load_gdt(&cpu_gdt_descr[cpu]);
 	load_idt(&idt_descr);
diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
index 822c8ce9d1f1..871366b83b3f 100644
--- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -32,6 +32,7 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/compiler.h>
+#include <linux/sched.h>	/* current */
 #include <asm/io.h>
 #include <asm/delay.h>
 #include <asm/uaccess.h>
@@ -376,10 +377,9 @@ acpi_cpufreq_cpu_init (
         arg0.buffer.length = 12;
         arg0.buffer.pointer = (u8 *) arg0_buf;
 
-	data = kmalloc(sizeof(struct cpufreq_acpi_io), GFP_KERNEL);
+	data = kzalloc(sizeof(struct cpufreq_acpi_io), GFP_KERNEL);
 	if (!data)
 		return (-ENOMEM);
-	memset(data, 0, sizeof(struct cpufreq_acpi_io));
 
 	acpi_io_data[cpu] = data;
 
diff --git a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
index aa622d52c6e5..270f2188d68b 100644
--- a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
+++ b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
@@ -28,6 +28,7 @@
 #include <linux/cpufreq.h>
 #include <linux/slab.h>
 #include <linux/cpumask.h>
+#include <linux/sched.h>	/* current / set_cpus_allowed() */
 
 #include <asm/processor.h> 
 #include <asm/msr.h>
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c
index 73a5dc5b26b8..edcd626001da 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c
@@ -171,10 +171,9 @@ static int get_ranges (unsigned char *pst)
 	unsigned int speed;
 	u8 fid, vid;
 
-	powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table) * (number_scales + 1)), GFP_KERNEL);
+	powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) * (number_scales + 1)), GFP_KERNEL);
 	if (!powernow_table)
 		return -ENOMEM;
-	memset(powernow_table, 0, (sizeof(struct cpufreq_frequency_table) * (number_scales + 1)));
 
 	for (j=0 ; j < number_scales; j++) {
 		fid = *pst++;
@@ -305,16 +304,13 @@ static int powernow_acpi_init(void)
 		goto err0;
 	}
 
-	acpi_processor_perf = kmalloc(sizeof(struct acpi_processor_performance),
+	acpi_processor_perf = kzalloc(sizeof(struct acpi_processor_performance),
 				      GFP_KERNEL);
-
 	if (!acpi_processor_perf) {
 		retval = -ENOMEM;
 		goto err0;
 	}
 
-	memset(acpi_processor_perf, 0, sizeof(struct acpi_processor_performance));
-
 	if (acpi_processor_register_performance(acpi_processor_perf, 0)) {
 		retval = -EIO;
 		goto err1;
@@ -337,14 +333,12 @@ static int powernow_acpi_init(void)
 		goto err2;
 	}
 
-	powernow_table = kmalloc((number_scales + 1) * (sizeof(struct cpufreq_frequency_table)), GFP_KERNEL);
+	powernow_table = kzalloc((number_scales + 1) * (sizeof(struct cpufreq_frequency_table)), GFP_KERNEL);
 	if (!powernow_table) {
 		retval = -ENOMEM;
 		goto err2;
 	}
 
-	memset(powernow_table, 0, ((number_scales + 1) * sizeof(struct cpufreq_frequency_table)));
-
 	pc.val = (unsigned long) acpi_processor_perf->states[0].control;
 	for (i = 0; i < number_scales; i++) {
 		u8 fid, vid;
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
index ab6e0611303d..68a1fc87f4ca 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
@@ -32,6 +32,7 @@
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/cpumask.h>
+#include <linux/sched.h>	/* for current / set_cpus_allowed() */
 
 #include <asm/msr.h>
 #include <asm/io.h>
@@ -44,7 +45,7 @@
 
 #define PFX "powernow-k8: "
 #define BFX PFX "BIOS error: "
-#define VERSION "version 1.50.3"
+#define VERSION "version 1.50.4"
 #include "powernow-k8.h"
 
 /* serialize freq changes  */
@@ -111,8 +112,8 @@ static int query_current_values_with_pending_wait(struct powernow_k8_data *data)
 	u32 i = 0;
 
 	do {
-		if (i++ > 0x1000000) {
-			printk(KERN_ERR PFX "detected change pending stuck\n");
+		if (i++ > 10000) {
+			dprintk("detected change pending stuck\n");
 			return 1;
 		}
 		rdmsr(MSR_FIDVID_STATUS, lo, hi);
@@ -159,6 +160,7 @@ static int write_new_fid(struct powernow_k8_data *data, u32 fid)
 {
 	u32 lo;
 	u32 savevid = data->currvid;
+	u32 i = 0;
 
 	if ((fid & INVALID_FID_MASK) || (data->currvid & INVALID_VID_MASK)) {
 		printk(KERN_ERR PFX "internal error - overflow on fid write\n");
@@ -170,10 +172,13 @@ static int write_new_fid(struct powernow_k8_data *data, u32 fid)
 	dprintk("writing fid 0x%x, lo 0x%x, hi 0x%x\n",
 		fid, lo, data->plllock * PLL_LOCK_CONVERSION);
 
-	wrmsr(MSR_FIDVID_CTL, lo, data->plllock * PLL_LOCK_CONVERSION);
-
-	if (query_current_values_with_pending_wait(data))
-		return 1;
+	do {
+		wrmsr(MSR_FIDVID_CTL, lo, data->plllock * PLL_LOCK_CONVERSION);
+		if (i++ > 100) {
+			printk(KERN_ERR PFX "internal error - pending bit very stuck - no further pstate changes possible\n");
+			return 1;
+		}			
+	} while (query_current_values_with_pending_wait(data));
 
 	count_off_irt(data);
 
@@ -197,6 +202,7 @@ static int write_new_vid(struct powernow_k8_data *data, u32 vid)
 {
 	u32 lo;
 	u32 savefid = data->currfid;
+	int i = 0;
 
 	if ((data->currfid & INVALID_FID_MASK) || (vid & INVALID_VID_MASK)) {
 		printk(KERN_ERR PFX "internal error - overflow on vid write\n");
@@ -208,10 +214,13 @@ static int write_new_vid(struct powernow_k8_data *data, u32 vid)
 	dprintk("writing vid 0x%x, lo 0x%x, hi 0x%x\n",
 		vid, lo, STOP_GRANT_5NS);
 
-	wrmsr(MSR_FIDVID_CTL, lo, STOP_GRANT_5NS);
-
-	if (query_current_values_with_pending_wait(data))
-		return 1;
+	do {
+		wrmsr(MSR_FIDVID_CTL, lo, STOP_GRANT_5NS);
+                if (i++ > 100) {
+                        printk(KERN_ERR PFX "internal error - pending bit very stuck - no further pstate changes possible\n");
+                        return 1;
+                }
+	} while (query_current_values_with_pending_wait(data));
 
 	if (savefid != data->currfid) {
 		printk(KERN_ERR PFX "fid changed on vid trans, old 0x%x new 0x%x\n",
@@ -453,7 +462,6 @@ static int check_supported_cpu(unsigned int cpu)
 
 	oldmask = current->cpus_allowed;
 	set_cpus_allowed(current, cpumask_of_cpu(cpu));
-	schedule();
 
 	if (smp_processor_id() != cpu) {
 		printk(KERN_ERR "limiting to cpu %u failed\n", cpu);
@@ -488,9 +496,7 @@ static int check_supported_cpu(unsigned int cpu)
 
 out:
 	set_cpus_allowed(current, oldmask);
-	schedule();
 	return rc;
-
 }
 
 static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, u8 maxvid)
@@ -904,7 +910,6 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi
 	/* only run on specific CPU from here on */
 	oldmask = current->cpus_allowed;
 	set_cpus_allowed(current, cpumask_of_cpu(pol->cpu));
-	schedule();
 
 	if (smp_processor_id() != pol->cpu) {
 		printk(KERN_ERR "limiting to cpu %u failed\n", pol->cpu);
@@ -959,8 +964,6 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi
 
 err_out:
 	set_cpus_allowed(current, oldmask);
-	schedule();
-
 	return ret;
 }
 
@@ -982,12 +985,11 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol)
 	if (!check_supported_cpu(pol->cpu))
 		return -ENODEV;
 
-	data = kmalloc(sizeof(struct powernow_k8_data), GFP_KERNEL);
+	data = kzalloc(sizeof(struct powernow_k8_data), GFP_KERNEL);
 	if (!data) {
 		printk(KERN_ERR PFX "unable to alloc powernow_k8_data");
 		return -ENOMEM;
 	}
-	memset(data,0,sizeof(struct powernow_k8_data));
 
 	data->cpu = pol->cpu;
 
@@ -1017,7 +1019,6 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol)
 	/* only run on specific CPU from here on */
 	oldmask = current->cpus_allowed;
 	set_cpus_allowed(current, cpumask_of_cpu(pol->cpu));
-	schedule();
 
 	if (smp_processor_id() != pol->cpu) {
 		printk(KERN_ERR "limiting to cpu %u failed\n", pol->cpu);
@@ -1036,7 +1037,6 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol)
 
 	/* run on any CPU again */
 	set_cpus_allowed(current, oldmask);
-	schedule();
 
 	pol->governor = CPUFREQ_DEFAULT_GOVERNOR;
 	pol->cpus = cpu_core_map[pol->cpu];
@@ -1071,7 +1071,6 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol)
 
 err_out:
 	set_cpus_allowed(current, oldmask);
-	schedule();
 	powernow_k8_cpu_exit_acpi(data);
 
 	kfree(data);
@@ -1107,17 +1106,14 @@ static unsigned int powernowk8_get (unsigned int cpu)
 		set_cpus_allowed(current, oldmask);
 		return 0;
 	}
-	preempt_disable();
-	
+
 	if (query_current_values_with_pending_wait(data))
 		goto out;
 
 	khz = find_khz_freq_from_fid(data->currfid);
 
- out:
-	preempt_enable_no_resched();
+out:
 	set_cpus_allowed(current, oldmask);
-
 	return khz;
 }
 
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
index c397b6220430..edb9873e27e3 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
@@ -22,6 +22,7 @@
 #include <linux/init.h>
 #include <linux/cpufreq.h>
 #include <linux/config.h>
+#include <linux/sched.h>	/* current */
 #include <linux/delay.h>
 #include <linux/compiler.h>
 
@@ -66,7 +67,7 @@ static const struct cpu_id cpu_ids[] = {
 	[CPU_MP4HT_D0]	= {15,  3, 4 },
 	[CPU_MP4HT_E0]	= {15,  4, 1 },
 };
-#define N_IDS	(sizeof(cpu_ids)/sizeof(cpu_ids[0]))
+#define N_IDS	ARRAY_SIZE(cpu_ids)
 
 struct cpu_model
 {
@@ -422,12 +423,11 @@ static int centrino_cpu_init_acpi(struct cpufreq_policy *policy)
 		}
 	}
 
-	centrino_model[cpu] = kmalloc(sizeof(struct cpu_model), GFP_KERNEL);
+	centrino_model[cpu] = kzalloc(sizeof(struct cpu_model), GFP_KERNEL);
 	if (!centrino_model[cpu]) {
 		result = -ENOMEM;
 		goto err_unreg;
 	}
-	memset(centrino_model[cpu], 0, sizeof(struct cpu_model));
 
 	centrino_model[cpu]->model_name=NULL;
 	centrino_model[cpu]->max_freq = p.states[0].core_frequency * 1000;
diff --git a/arch/i386/kernel/cpu/intel.c b/arch/i386/kernel/cpu/intel.c
index 43601de0f633..5e2da704f0fa 100644
--- a/arch/i386/kernel/cpu/intel.c
+++ b/arch/i386/kernel/cpu/intel.c
@@ -6,6 +6,7 @@
 #include <linux/bitops.h>
 #include <linux/smp.h>
 #include <linux/thread_info.h>
+#include <linux/module.h>
 
 #include <asm/processor.h>
 #include <asm/msr.h>
@@ -157,7 +158,7 @@ static void __devinit init_intel(struct cpuinfo_x86 *c)
 	if ( p )
 		strcpy(c->x86_model_id, p);
 	
-	c->x86_num_cores = num_cpu_cores(c);
+	c->x86_max_cores = num_cpu_cores(c);
 
 	detect_ht(c);
 
@@ -264,5 +265,52 @@ __init int intel_cpu_init(void)
 	return 0;
 }
 
+#ifndef CONFIG_X86_CMPXCHG
+unsigned long cmpxchg_386_u8(volatile void *ptr, u8 old, u8 new)
+{
+	u8 prev;
+	unsigned long flags;
+
+	/* Poor man's cmpxchg for 386. Unsuitable for SMP */
+	local_irq_save(flags);
+	prev = *(u8 *)ptr;
+	if (prev == old)
+		*(u8 *)ptr = new;
+	local_irq_restore(flags);
+	return prev;
+}
+EXPORT_SYMBOL(cmpxchg_386_u8);
+
+unsigned long cmpxchg_386_u16(volatile void *ptr, u16 old, u16 new)
+{
+	u16 prev;
+	unsigned long flags;
+
+	/* Poor man's cmpxchg for 386. Unsuitable for SMP */
+	local_irq_save(flags);
+	prev = *(u16 *)ptr;
+	if (prev == old)
+		*(u16 *)ptr = new;
+	local_irq_restore(flags);
+	return prev;
+}
+EXPORT_SYMBOL(cmpxchg_386_u16);
+
+unsigned long cmpxchg_386_u32(volatile void *ptr, u32 old, u32 new)
+{
+	u32 prev;
+	unsigned long flags;
+
+	/* Poor man's cmpxchg for 386. Unsuitable for SMP */
+	local_irq_save(flags);
+	prev = *(u32 *)ptr;
+	if (prev == old)
+		*(u32 *)ptr = new;
+	local_irq_restore(flags);
+	return prev;
+}
+EXPORT_SYMBOL(cmpxchg_386_u32);
+#endif
+
 // arch_initcall(intel_cpu_init);
 
diff --git a/arch/i386/kernel/cpu/intel_cacheinfo.c b/arch/i386/kernel/cpu/intel_cacheinfo.c
index 9e0d5f83cb9f..fbfd374aa336 100644
--- a/arch/i386/kernel/cpu/intel_cacheinfo.c
+++ b/arch/i386/kernel/cpu/intel_cacheinfo.c
@@ -3,6 +3,7 @@
  *
  *      Changes:
  *      Venkatesh Pallipadi	: Adding cache identification through cpuid(4)
+ *		Ashok Raj <ashok.raj@intel.com>: Work with CPU hotplug infrastructure.
  */
 
 #include <linux/init.h>
@@ -10,6 +11,7 @@
 #include <linux/device.h>
 #include <linux/compiler.h>
 #include <linux/cpu.h>
+#include <linux/sched.h>
 
 #include <asm/processor.h>
 #include <asm/smp.h>
@@ -28,7 +30,7 @@ struct _cache_table
 };
 
 /* all the cache descriptor types we care about (no TLB or trace cache entries) */
-static struct _cache_table cache_table[] __devinitdata =
+static struct _cache_table cache_table[] __cpuinitdata =
 {
 	{ 0x06, LVL_1_INST, 8 },	/* 4-way set assoc, 32 byte line size */
 	{ 0x08, LVL_1_INST, 16 },	/* 4-way set assoc, 32 byte line size */
@@ -117,10 +119,9 @@ struct _cpuid4_info {
 	cpumask_t shared_cpu_map;
 };
 
-#define MAX_CACHE_LEAVES		4
 static unsigned short			num_cache_leaves;
 
-static int __devinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf)
+static int __cpuinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf)
 {
 	unsigned int		eax, ebx, ecx, edx;
 	union _cpuid4_leaf_eax	cache_eax;
@@ -144,23 +145,18 @@ static int __init find_num_cache_leaves(void)
 {
 	unsigned int		eax, ebx, ecx, edx;
 	union _cpuid4_leaf_eax	cache_eax;
-	int 			i;
-	int 			retval;
+	int 			i = -1;
 
-	retval = MAX_CACHE_LEAVES;
-	/* Do cpuid(4) loop to find out num_cache_leaves */
-	for (i = 0; i < MAX_CACHE_LEAVES; i++) {
+	do {
+		++i;
+		/* Do cpuid(4) loop to find out num_cache_leaves */
 		cpuid_count(4, i, &eax, &ebx, &ecx, &edx);
 		cache_eax.full = eax;
-		if (cache_eax.split.type == CACHE_TYPE_NULL) {
-			retval = i;
-			break;
-		}
-	}
-	return retval;
+	} while (cache_eax.split.type != CACHE_TYPE_NULL);
+	return i;
 }
 
-unsigned int __devinit init_intel_cacheinfo(struct cpuinfo_x86 *c)
+unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c)
 {
 	unsigned int trace = 0, l1i = 0, l1d = 0, l2 = 0, l3 = 0; /* Cache sizes */
 	unsigned int new_l1d = 0, new_l1i = 0; /* Cache sizes from cpuid(4) */
@@ -284,13 +280,7 @@ unsigned int __devinit init_intel_cacheinfo(struct cpuinfo_x86 *c)
 		if ( l3 )
 			printk(KERN_INFO "CPU: L3 cache: %dK\n", l3);
 
-		/*
-		 * This assumes the L3 cache is shared; it typically lives in
-		 * the northbridge.  The L1 caches are included by the L2
-		 * cache, and so should not be included for the purpose of
-		 * SMP switching weights.
-		 */
-		c->x86_cache_size = l2 ? l2 : (l1i+l1d);
+		c->x86_cache_size = l3 ? l3 : (l2 ? l2 : (l1i+l1d));
 	}
 
 	return l2;
@@ -301,31 +291,47 @@ static struct _cpuid4_info *cpuid4_info[NR_CPUS];
 #define CPUID4_INFO_IDX(x,y)    (&((cpuid4_info[x])[y]))
 
 #ifdef CONFIG_SMP
-static void __devinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
+static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
 {
-	struct _cpuid4_info	*this_leaf;
+	struct _cpuid4_info	*this_leaf, *sibling_leaf;
 	unsigned long num_threads_sharing;
-#ifdef CONFIG_X86_HT
-	struct cpuinfo_x86 *c = cpu_data + cpu;
-#endif
+	int index_msb, i;
+	struct cpuinfo_x86 *c = cpu_data;
 
 	this_leaf = CPUID4_INFO_IDX(cpu, index);
 	num_threads_sharing = 1 + this_leaf->eax.split.num_threads_sharing;
 
 	if (num_threads_sharing == 1)
 		cpu_set(cpu, this_leaf->shared_cpu_map);
-#ifdef CONFIG_X86_HT
-	else if (num_threads_sharing == smp_num_siblings)
-		this_leaf->shared_cpu_map = cpu_sibling_map[cpu];
-	else if (num_threads_sharing == (c->x86_num_cores * smp_num_siblings))
-		this_leaf->shared_cpu_map = cpu_core_map[cpu];
-	else
-		printk(KERN_DEBUG "Number of CPUs sharing cache didn't match "
-				"any known set of CPUs\n");
-#endif
+	else {
+		index_msb = get_count_order(num_threads_sharing);
+
+		for_each_online_cpu(i) {
+			if (c[i].apicid >> index_msb ==
+			    c[cpu].apicid >> index_msb) {
+				cpu_set(i, this_leaf->shared_cpu_map);
+				if (i != cpu && cpuid4_info[i])  {
+					sibling_leaf = CPUID4_INFO_IDX(i, index);
+					cpu_set(cpu, sibling_leaf->shared_cpu_map);
+				}
+			}
+		}
+	}
+}
+static void __devinit cache_remove_shared_cpu_map(unsigned int cpu, int index)
+{
+	struct _cpuid4_info	*this_leaf, *sibling_leaf;
+	int sibling;
+
+	this_leaf = CPUID4_INFO_IDX(cpu, index);
+	for_each_cpu_mask(sibling, this_leaf->shared_cpu_map) {
+		sibling_leaf = CPUID4_INFO_IDX(sibling, index);	
+		cpu_clear(cpu, sibling_leaf->shared_cpu_map);
+	}
 }
 #else
 static void __init cache_shared_cpu_map_setup(unsigned int cpu, int index) {}
+static void __init cache_remove_shared_cpu_map(unsigned int cpu, int index) {}
 #endif
 
 static void free_cache_attributes(unsigned int cpu)
@@ -334,7 +340,7 @@ static void free_cache_attributes(unsigned int cpu)
 	cpuid4_info[cpu] = NULL;
 }
 
-static int __devinit detect_cache_attributes(unsigned int cpu)
+static int __cpuinit detect_cache_attributes(unsigned int cpu)
 {
 	struct _cpuid4_info	*this_leaf;
 	unsigned long 		j;
@@ -511,7 +517,7 @@ static void cpuid4_cache_sysfs_exit(unsigned int cpu)
 	free_cache_attributes(cpu);
 }
 
-static int __devinit cpuid4_cache_sysfs_init(unsigned int cpu)
+static int __cpuinit cpuid4_cache_sysfs_init(unsigned int cpu)
 {
 
 	if (num_cache_leaves == 0)
@@ -542,7 +548,7 @@ err_out:
 }
 
 /* Add/Remove cache interface for CPU device */
-static int __devinit cache_add_dev(struct sys_device * sys_dev)
+static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
 {
 	unsigned int cpu = sys_dev->id;
 	unsigned long i, j;
@@ -579,33 +585,60 @@ static int __devinit cache_add_dev(struct sys_device * sys_dev)
 	return retval;
 }
 
-static int __devexit cache_remove_dev(struct sys_device * sys_dev)
+static void __cpuexit cache_remove_dev(struct sys_device * sys_dev)
 {
 	unsigned int cpu = sys_dev->id;
 	unsigned long i;
 
-	for (i = 0; i < num_cache_leaves; i++)
+	for (i = 0; i < num_cache_leaves; i++) {
+		cache_remove_shared_cpu_map(cpu, i);
 		kobject_unregister(&(INDEX_KOBJECT_PTR(cpu,i)->kobj));
+	}
 	kobject_unregister(cache_kobject[cpu]);
 	cpuid4_cache_sysfs_exit(cpu);
-	return 0;
+	return;
+}
+
+static int __cpuinit cacheinfo_cpu_callback(struct notifier_block *nfb,
+					unsigned long action, void *hcpu)
+{
+	unsigned int cpu = (unsigned long)hcpu;
+	struct sys_device *sys_dev;
+
+	sys_dev = get_cpu_sysdev(cpu);
+	switch (action) {
+	case CPU_ONLINE:
+		cache_add_dev(sys_dev);
+		break;
+	case CPU_DEAD:
+		cache_remove_dev(sys_dev);
+		break;
+	}
+	return NOTIFY_OK;
 }
 
-static struct sysdev_driver cache_sysdev_driver = {
-	.add = cache_add_dev,
-	.remove = __devexit_p(cache_remove_dev),
+static struct notifier_block cacheinfo_cpu_notifier =
+{
+    .notifier_call = cacheinfo_cpu_callback,
 };
 
-/* Register/Unregister the cpu_cache driver */
-static int __devinit cache_register_driver(void)
+static int __cpuinit cache_sysfs_init(void)
 {
+	int i;
+
 	if (num_cache_leaves == 0)
 		return 0;
 
-	return sysdev_driver_register(&cpu_sysdev_class,&cache_sysdev_driver);
+	register_cpu_notifier(&cacheinfo_cpu_notifier);
+
+	for_each_online_cpu(i) {
+		cacheinfo_cpu_callback(&cacheinfo_cpu_notifier, CPU_ONLINE,
+			(void *)(long)i);
+	}
+
+	return 0;
 }
 
-device_initcall(cache_register_driver);
+device_initcall(cache_sysfs_init);
 
 #endif
-
diff --git a/arch/i386/kernel/cpu/mcheck/k7.c b/arch/i386/kernel/cpu/mcheck/k7.c
index c4abe7657397..fc5d5215e23d 100644
--- a/arch/i386/kernel/cpu/mcheck/k7.c
+++ b/arch/i386/kernel/cpu/mcheck/k7.c
@@ -7,7 +7,6 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/config.h>
-#include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/smp.h>
 
@@ -69,7 +68,7 @@ static fastcall void k7_machine_check(struct pt_regs * regs, long error_code)
 
 
 /* AMD K7 machine check is Intel like */
-void __devinit amd_mcheck_init(struct cpuinfo_x86 *c)
+void amd_mcheck_init(struct cpuinfo_x86 *c)
 {
 	u32 l, h;
 	int i;
diff --git a/arch/i386/kernel/cpu/mcheck/mce.c b/arch/i386/kernel/cpu/mcheck/mce.c
index 2cf25d2ba0f1..6170af3c271a 100644
--- a/arch/i386/kernel/cpu/mcheck/mce.c
+++ b/arch/i386/kernel/cpu/mcheck/mce.c
@@ -16,7 +16,7 @@
 
 #include "mce.h"
 
-int mce_disabled __devinitdata = 0;
+int mce_disabled = 0;
 int nr_mce_banks;
 
 EXPORT_SYMBOL_GPL(nr_mce_banks);	/* non-fatal.o */
@@ -31,7 +31,7 @@ static fastcall void unexpected_machine_check(struct pt_regs * regs, long error_
 void fastcall (*machine_check_vector)(struct pt_regs *, long error_code) = unexpected_machine_check;
 
 /* This has to be run for each processor */
-void __devinit mcheck_init(struct cpuinfo_x86 *c)
+void mcheck_init(struct cpuinfo_x86 *c)
 {
 	if (mce_disabled==1)
 		return;
diff --git a/arch/i386/kernel/cpu/mcheck/non-fatal.c b/arch/i386/kernel/cpu/mcheck/non-fatal.c
index 7864ddfccf07..82dffe0d4954 100644
--- a/arch/i386/kernel/cpu/mcheck/non-fatal.c
+++ b/arch/i386/kernel/cpu/mcheck/non-fatal.c
@@ -12,7 +12,6 @@
 #include <linux/kernel.h>
 #include <linux/jiffies.h>
 #include <linux/config.h>
-#include <linux/irq.h>
 #include <linux/workqueue.h>
 #include <linux/interrupt.h>
 #include <linux/smp.h>
diff --git a/arch/i386/kernel/cpu/mcheck/p4.c b/arch/i386/kernel/cpu/mcheck/p4.c
index 0abccb6fdf9e..fd2c459a31ef 100644
--- a/arch/i386/kernel/cpu/mcheck/p4.c
+++ b/arch/i386/kernel/cpu/mcheck/p4.c
@@ -6,7 +6,6 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/config.h>
-#include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/smp.h>
 
@@ -78,7 +77,7 @@ fastcall void smp_thermal_interrupt(struct pt_regs *regs)
 }
 
 /* P4/Xeon Thermal regulation detect and init */
-static void __devinit intel_init_thermal(struct cpuinfo_x86 *c)
+static void intel_init_thermal(struct cpuinfo_x86 *c)
 {
 	u32 l, h;
 	unsigned int cpu = smp_processor_id();
@@ -232,7 +231,7 @@ static fastcall void intel_machine_check(struct pt_regs * regs, long error_code)
 }
 
 
-void __devinit intel_p4_mcheck_init(struct cpuinfo_x86 *c)
+void intel_p4_mcheck_init(struct cpuinfo_x86 *c)
 {
 	u32 l, h;
 	int i;
diff --git a/arch/i386/kernel/cpu/mcheck/p5.c b/arch/i386/kernel/cpu/mcheck/p5.c
index ec0614cd2925..94bc43d950cf 100644
--- a/arch/i386/kernel/cpu/mcheck/p5.c
+++ b/arch/i386/kernel/cpu/mcheck/p5.c
@@ -6,7 +6,6 @@
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
-#include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/smp.h>
 
@@ -29,7 +28,7 @@ static fastcall void pentium_machine_check(struct pt_regs * regs, long error_cod
 }
 
 /* Set up machine check reporting for processors with Intel style MCE */
-void __devinit intel_p5_mcheck_init(struct cpuinfo_x86 *c)
+void intel_p5_mcheck_init(struct cpuinfo_x86 *c)
 {
 	u32 l, h;
 	
diff --git a/arch/i386/kernel/cpu/mcheck/p6.c b/arch/i386/kernel/cpu/mcheck/p6.c
index f01b73f947e1..deeae42ce199 100644
--- a/arch/i386/kernel/cpu/mcheck/p6.c
+++ b/arch/i386/kernel/cpu/mcheck/p6.c
@@ -6,7 +6,6 @@
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
-#include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/smp.h>
 
@@ -80,7 +79,7 @@ static fastcall void intel_machine_check(struct pt_regs * regs, long error_code)
 }
 
 /* Set up machine check reporting for processors with Intel style MCE */
-void __devinit intel_p6_mcheck_init(struct cpuinfo_x86 *c)
+void intel_p6_mcheck_init(struct cpuinfo_x86 *c)
 {
 	u32 l, h;
 	int i;
@@ -103,11 +102,16 @@ void __devinit intel_p6_mcheck_init(struct cpuinfo_x86 *c)
 		wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
 	nr_mce_banks = l & 0xff;
 
-	/* Don't enable bank 0 on intel P6 cores, it goes bang quickly. */
-	for (i=1; i<nr_mce_banks; i++) {
+	/*
+	 * Following the example in IA-32 SDM Vol 3:
+	 * - MC0_CTL should not be written
+	 * - Status registers on all banks should be cleared on reset
+	 */
+	for (i=1; i<nr_mce_banks; i++)
 		wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
+
+	for (i=0; i<nr_mce_banks; i++)
 		wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
-	}
 
 	set_in_cr4 (X86_CR4_MCE);
 	printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
diff --git a/arch/i386/kernel/cpu/mcheck/winchip.c b/arch/i386/kernel/cpu/mcheck/winchip.c
index 7bae68fa168f..9e424b6c293d 100644
--- a/arch/i386/kernel/cpu/mcheck/winchip.c
+++ b/arch/i386/kernel/cpu/mcheck/winchip.c
@@ -6,7 +6,6 @@
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
-#include <linux/irq.h>
 #include <linux/interrupt.h>
 
 #include <asm/processor.h> 
@@ -23,7 +22,7 @@ static fastcall void winchip_machine_check(struct pt_regs * regs, long error_cod
 }
 
 /* Set up machine check reporting on the Winchip C6 series */
-void __devinit winchip_mcheck_init(struct cpuinfo_x86 *c)
+void winchip_mcheck_init(struct cpuinfo_x86 *c)
 {
 	u32 lo, hi;
 	machine_check_vector = winchip_machine_check;
diff --git a/arch/i386/kernel/cpu/mtrr/if.c b/arch/i386/kernel/cpu/mtrr/if.c
index 1923e0aed26a..cf39e205d33c 100644
--- a/arch/i386/kernel/cpu/mtrr/if.c
+++ b/arch/i386/kernel/cpu/mtrr/if.c
@@ -149,60 +149,89 @@ mtrr_write(struct file *file, const char __user *buf, size_t len, loff_t * ppos)
 	return -EINVAL;
 }
 
-static int
-mtrr_ioctl(struct inode *inode, struct file *file,
-	   unsigned int cmd, unsigned long __arg)
+static long
+mtrr_ioctl(struct file *file, unsigned int cmd, unsigned long __arg)
 {
-	int err;
+	int err = 0;
 	mtrr_type type;
 	struct mtrr_sentry sentry;
 	struct mtrr_gentry gentry;
 	void __user *arg = (void __user *) __arg;
 
 	switch (cmd) {
+	case MTRRIOC_ADD_ENTRY:
+	case MTRRIOC_SET_ENTRY:
+	case MTRRIOC_DEL_ENTRY:
+	case MTRRIOC_KILL_ENTRY:
+	case MTRRIOC_ADD_PAGE_ENTRY:
+	case MTRRIOC_SET_PAGE_ENTRY:
+	case MTRRIOC_DEL_PAGE_ENTRY:
+	case MTRRIOC_KILL_PAGE_ENTRY:
+		if (copy_from_user(&sentry, arg, sizeof sentry))
+			return -EFAULT;
+		break;
+	case MTRRIOC_GET_ENTRY:
+	case MTRRIOC_GET_PAGE_ENTRY:
+		if (copy_from_user(&gentry, arg, sizeof gentry))
+			return -EFAULT;
+		break;
+#ifdef CONFIG_COMPAT
+	case MTRRIOC32_ADD_ENTRY:
+	case MTRRIOC32_SET_ENTRY:
+	case MTRRIOC32_DEL_ENTRY:
+	case MTRRIOC32_KILL_ENTRY:
+	case MTRRIOC32_ADD_PAGE_ENTRY:
+	case MTRRIOC32_SET_PAGE_ENTRY:
+	case MTRRIOC32_DEL_PAGE_ENTRY:
+	case MTRRIOC32_KILL_PAGE_ENTRY: {
+		struct mtrr_sentry32 __user *s32 = (struct mtrr_sentry32 __user *)__arg;
+		err = get_user(sentry.base, &s32->base);
+		err |= get_user(sentry.size, &s32->size);
+		err |= get_user(sentry.type, &s32->type);
+		if (err)
+			return err;
+		break;
+	}
+	case MTRRIOC32_GET_ENTRY:
+	case MTRRIOC32_GET_PAGE_ENTRY: {
+		struct mtrr_gentry32 __user *g32 = (struct mtrr_gentry32 __user *)__arg;
+		err = get_user(gentry.regnum, &g32->regnum);
+		err |= get_user(gentry.base, &g32->base);
+		err |= get_user(gentry.size, &g32->size);
+		err |= get_user(gentry.type, &g32->type);
+		if (err)
+			return err;
+		break;
+	}
+#endif
+	}
+
+	switch (cmd) {
 	default:
 		return -ENOTTY;
 	case MTRRIOC_ADD_ENTRY:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		if (copy_from_user(&sentry, arg, sizeof sentry))
-			return -EFAULT;
 		err =
 		    mtrr_file_add(sentry.base, sentry.size, sentry.type, 1,
 				  file, 0);
-		if (err < 0)
-			return err;
 		break;
 	case MTRRIOC_SET_ENTRY:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		if (copy_from_user(&sentry, arg, sizeof sentry))
-			return -EFAULT;
 		err = mtrr_add(sentry.base, sentry.size, sentry.type, 0);
-		if (err < 0)
-			return err;
 		break;
 	case MTRRIOC_DEL_ENTRY:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		if (copy_from_user(&sentry, arg, sizeof sentry))
-			return -EFAULT;
 		err = mtrr_file_del(sentry.base, sentry.size, file, 0);
-		if (err < 0)
-			return err;
 		break;
 	case MTRRIOC_KILL_ENTRY:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		if (copy_from_user(&sentry, arg, sizeof sentry))
-			return -EFAULT;
 		err = mtrr_del(-1, sentry.base, sentry.size);
-		if (err < 0)
-			return err;
 		break;
 	case MTRRIOC_GET_ENTRY:
-		if (copy_from_user(&gentry, arg, sizeof gentry))
-			return -EFAULT;
 		if (gentry.regnum >= num_var_ranges)
 			return -EINVAL;
 		mtrr_if->get(gentry.regnum, &gentry.base, &gentry.size, &type);
@@ -217,60 +246,59 @@ mtrr_ioctl(struct inode *inode, struct file *file,
 			gentry.type = type;
 		}
 
-		if (copy_to_user(arg, &gentry, sizeof gentry))
-			return -EFAULT;
 		break;
 	case MTRRIOC_ADD_PAGE_ENTRY:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		if (copy_from_user(&sentry, arg, sizeof sentry))
-			return -EFAULT;
 		err =
 		    mtrr_file_add(sentry.base, sentry.size, sentry.type, 1,
 				  file, 1);
-		if (err < 0)
-			return err;
 		break;
 	case MTRRIOC_SET_PAGE_ENTRY:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		if (copy_from_user(&sentry, arg, sizeof sentry))
-			return -EFAULT;
 		err = mtrr_add_page(sentry.base, sentry.size, sentry.type, 0);
-		if (err < 0)
-			return err;
 		break;
 	case MTRRIOC_DEL_PAGE_ENTRY:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		if (copy_from_user(&sentry, arg, sizeof sentry))
-			return -EFAULT;
 		err = mtrr_file_del(sentry.base, sentry.size, file, 1);
-		if (err < 0)
-			return err;
 		break;
 	case MTRRIOC_KILL_PAGE_ENTRY:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		if (copy_from_user(&sentry, arg, sizeof sentry))
-			return -EFAULT;
 		err = mtrr_del_page(-1, sentry.base, sentry.size);
-		if (err < 0)
-			return err;
 		break;
 	case MTRRIOC_GET_PAGE_ENTRY:
-		if (copy_from_user(&gentry, arg, sizeof gentry))
-			return -EFAULT;
 		if (gentry.regnum >= num_var_ranges)
 			return -EINVAL;
 		mtrr_if->get(gentry.regnum, &gentry.base, &gentry.size, &type);
 		gentry.type = type;
+		break;
+	}
+
+	if (err)
+		return err;
 
+	switch(cmd) {
+	case MTRRIOC_GET_ENTRY:
+	case MTRRIOC_GET_PAGE_ENTRY:
 		if (copy_to_user(arg, &gentry, sizeof gentry))
-			return -EFAULT;
+			err = -EFAULT;
+		break;
+#ifdef CONFIG_COMPAT
+	case MTRRIOC32_GET_ENTRY:
+	case MTRRIOC32_GET_PAGE_ENTRY: {
+		struct mtrr_gentry32 __user *g32 = (struct mtrr_gentry32 __user *)__arg;
+		err = put_user(gentry.base, &g32->base);
+		err |= put_user(gentry.size, &g32->size);
+		err |= put_user(gentry.regnum, &g32->regnum);
+		err |= put_user(gentry.type, &g32->type);
 		break;
 	}
-	return 0;
+#endif
+	}
+	return err;
 }
 
 static int
@@ -310,7 +338,8 @@ static struct file_operations mtrr_fops = {
 	.read    = seq_read,
 	.llseek  = seq_lseek,
 	.write   = mtrr_write,
-	.ioctl   = mtrr_ioctl,
+	.unlocked_ioctl = mtrr_ioctl,
+	.compat_ioctl = mtrr_ioctl,
 	.release = mtrr_close,
 };
 
diff --git a/arch/i386/kernel/cpu/mtrr/main.c b/arch/i386/kernel/cpu/mtrr/main.c
index dd4ebd6af7e4..1e9db198c440 100644
--- a/arch/i386/kernel/cpu/mtrr/main.c
+++ b/arch/i386/kernel/cpu/mtrr/main.c
@@ -626,6 +626,14 @@ void __init mtrr_bp_init(void)
 		if (cpuid_eax(0x80000000) >= 0x80000008) {
 			u32 phys_addr;
 			phys_addr = cpuid_eax(0x80000008) & 0xff;
+			/* CPUID workaround for Intel 0F33/0F34 CPU */
+			if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
+			    boot_cpu_data.x86 == 0xF &&
+			    boot_cpu_data.x86_model == 0x3 &&
+			    (boot_cpu_data.x86_mask == 0x3 ||
+			     boot_cpu_data.x86_mask == 0x4))
+				phys_addr = 36;
+
 			size_or_mask = ~((1 << (phys_addr - PAGE_SHIFT)) - 1);
 			size_and_mask = ~size_or_mask & 0xfff00000;
 		} else if (boot_cpu_data.x86_vendor == X86_VENDOR_CENTAUR &&
diff --git a/arch/i386/kernel/cpu/proc.c b/arch/i386/kernel/cpu/proc.c
index 8bd77d948a84..e7921315ae9d 100644
--- a/arch/i386/kernel/cpu/proc.c
+++ b/arch/i386/kernel/cpu/proc.c
@@ -44,7 +44,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 
 		/* Intel-defined (#2) */
-		"pni", NULL, NULL, "monitor", "ds_cpl", NULL, NULL, "est",
+		"pni", NULL, NULL, "monitor", "ds_cpl", "vmx", NULL, "est",
 		"tm2", NULL, "cid", NULL, NULL, "cx16", "xtpr", NULL,
 		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
@@ -94,12 +94,11 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	if (c->x86_cache_size >= 0)
 		seq_printf(m, "cache size\t: %d KB\n", c->x86_cache_size);
 #ifdef CONFIG_X86_HT
-	if (c->x86_num_cores * smp_num_siblings > 1) {
+	if (c->x86_max_cores * smp_num_siblings > 1) {
 		seq_printf(m, "physical id\t: %d\n", phys_proc_id[n]);
-		seq_printf(m, "siblings\t: %d\n",
-				c->x86_num_cores * smp_num_siblings);
+		seq_printf(m, "siblings\t: %d\n", cpus_weight(cpu_core_map[n]));
 		seq_printf(m, "core id\t\t: %d\n", cpu_core_id[n]);
-		seq_printf(m, "cpu cores\t: %d\n", c->x86_num_cores);
+		seq_printf(m, "cpu cores\t: %d\n", c->booted_cores);
 	}
 #endif
 	
diff --git a/arch/i386/kernel/cpuid.c b/arch/i386/kernel/cpuid.c
index 4647db4ad6de..13bae799e626 100644
--- a/arch/i386/kernel/cpuid.c
+++ b/arch/i386/kernel/cpuid.c
@@ -163,7 +163,7 @@ static int cpuid_class_device_create(int i)
 	int err = 0;
 	struct class_device *class_err;
 
-	class_err = class_device_create(cpuid_class, MKDEV(CPUID_MAJOR, i), NULL, "cpu%d",i);
+	class_err = class_device_create(cpuid_class, NULL, MKDEV(CPUID_MAJOR, i), NULL, "cpu%d",i);
 	if (IS_ERR(class_err))
 		err = PTR_ERR(class_err);
 	return err;
diff --git a/arch/i386/kernel/crash.c b/arch/i386/kernel/crash.c
index 913be77bb844..0248e084017c 100644
--- a/arch/i386/kernel/crash.c
+++ b/arch/i386/kernel/crash.c
@@ -11,10 +11,8 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/smp.h>
-#include <linux/irq.h>
 #include <linux/reboot.h>
 #include <linux/kexec.h>
-#include <linux/irq.h>
 #include <linux/delay.h>
 #include <linux/elf.h>
 #include <linux/elfcore.h>
diff --git a/arch/i386/kernel/entry.S b/arch/i386/kernel/entry.S
index 9e24f7b207ee..e50b93155249 100644
--- a/arch/i386/kernel/entry.S
+++ b/arch/i386/kernel/entry.S
@@ -560,11 +560,10 @@ nmi_stack_fixup:
 nmi_debug_stack_check:
 	cmpw $__KERNEL_CS,16(%esp)
 	jne nmi_stack_correct
-	cmpl $debug - 1,(%esp)
-	jle nmi_stack_correct
+	cmpl $debug,(%esp)
+	jb nmi_stack_correct
 	cmpl $debug_esp_fix_insn,(%esp)
-	jle nmi_debug_stack_fixup
-nmi_debug_stack_fixup:
+	ja nmi_stack_correct
 	FIX_STACK(24,nmi_stack_correct, 1)
 	jmp nmi_stack_correct
 
diff --git a/arch/i386/kernel/i8259.c b/arch/i386/kernel/i8259.c
index 178f4e9bac9d..323ef8ab3244 100644
--- a/arch/i386/kernel/i8259.c
+++ b/arch/i386/kernel/i8259.c
@@ -16,7 +16,6 @@
 #include <asm/atomic.h>
 #include <asm/system.h>
 #include <asm/io.h>
-#include <asm/irq.h>
 #include <asm/timer.h>
 #include <asm/pgtable.h>
 #include <asm/delay.h>
@@ -25,8 +24,6 @@
 #include <asm/arch_hooks.h>
 #include <asm/i8259.h>
 
-#include <linux/irq.h>
-
 #include <io_ports.h>
 
 /*
diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c
index 378313b0cce9..22c8675c79f4 100644
--- a/arch/i386/kernel/io_apic.c
+++ b/arch/i386/kernel/io_apic.c
@@ -21,7 +21,6 @@
  */
 
 #include <linux/mm.h>
-#include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/delay.h>
@@ -47,6 +46,9 @@
 int (*ioapic_renumber_irq)(int ioapic, int irq);
 atomic_t irq_mis_count;
 
+/* Where if anywhere is the i8259 connect in external int mode */
+static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
+
 static DEFINE_SPINLOCK(ioapic_lock);
 
 /*
@@ -739,7 +741,7 @@ static int find_irq_entry(int apic, int pin, int type)
 /*
  * Find the pin to which IRQ[irq] (ISA) is connected
  */
-static int find_isa_irq_pin(int irq, int type)
+static int __init find_isa_irq_pin(int irq, int type)
 {
 	int i;
 
@@ -759,6 +761,33 @@ static int find_isa_irq_pin(int irq, int type)
 	return -1;
 }
 
+static int __init find_isa_irq_apic(int irq, int type)
+{
+	int i;
+
+	for (i = 0; i < mp_irq_entries; i++) {
+		int lbus = mp_irqs[i].mpc_srcbus;
+
+		if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA ||
+		     mp_bus_id_to_type[lbus] == MP_BUS_EISA ||
+		     mp_bus_id_to_type[lbus] == MP_BUS_MCA ||
+		     mp_bus_id_to_type[lbus] == MP_BUS_NEC98
+		    ) &&
+		    (mp_irqs[i].mpc_irqtype == type) &&
+		    (mp_irqs[i].mpc_srcbusirq == irq))
+			break;
+	}
+	if (i < mp_irq_entries) {
+		int apic;
+		for(apic = 0; apic < nr_ioapics; apic++) {
+			if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic)
+				return apic;
+		}
+	}
+
+	return -1;
+}
+
 /*
  * Find a specific PCI IRQ entry.
  * Not an __init, possibly needed by modules
@@ -1254,7 +1283,7 @@ static void __init setup_IO_APIC_irqs(void)
 /*
  * Set up the 8259A-master output pin:
  */
-static void __init setup_ExtINT_IRQ0_pin(unsigned int pin, int vector)
+static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector)
 {
 	struct IO_APIC_route_entry entry;
 	unsigned long flags;
@@ -1288,8 +1317,8 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int pin, int vector)
 	 * Add it to the IO-APIC irq-routing table:
 	 */
 	spin_lock_irqsave(&ioapic_lock, flags);
-	io_apic_write(0, 0x11+2*pin, *(((int *)&entry)+1));
-	io_apic_write(0, 0x10+2*pin, *(((int *)&entry)+0));
+	io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1));
+	io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0));
 	spin_unlock_irqrestore(&ioapic_lock, flags);
 
 	enable_8259A_irq(0);
@@ -1596,7 +1625,8 @@ void /*__init*/ print_PIC(void)
 static void __init enable_IO_APIC(void)
 {
 	union IO_APIC_reg_01 reg_01;
-	int i;
+	int i8259_apic, i8259_pin;
+	int i, apic;
 	unsigned long flags;
 
 	for (i = 0; i < PIN_MAP_SIZE; i++) {
@@ -1610,11 +1640,52 @@ static void __init enable_IO_APIC(void)
 	/*
 	 * The number of IO-APIC IRQ registers (== #pins):
 	 */
-	for (i = 0; i < nr_ioapics; i++) {
+	for (apic = 0; apic < nr_ioapics; apic++) {
 		spin_lock_irqsave(&ioapic_lock, flags);
-		reg_01.raw = io_apic_read(i, 1);
+		reg_01.raw = io_apic_read(apic, 1);
 		spin_unlock_irqrestore(&ioapic_lock, flags);
-		nr_ioapic_registers[i] = reg_01.bits.entries+1;
+		nr_ioapic_registers[apic] = reg_01.bits.entries+1;
+	}
+	for(apic = 0; apic < nr_ioapics; apic++) {
+		int pin;
+		/* See if any of the pins is in ExtINT mode */
+		for(pin = 0; pin < nr_ioapic_registers[i]; pin++) {
+			struct IO_APIC_route_entry entry;
+			spin_lock_irqsave(&ioapic_lock, flags);
+			*(((int *)&entry) + 0) = io_apic_read(apic, 0x10 + 2 * pin);
+			*(((int *)&entry) + 1) = io_apic_read(apic, 0x11 + 2 * pin);
+			spin_unlock_irqrestore(&ioapic_lock, flags);
+
+
+			/* If the interrupt line is enabled and in ExtInt mode
+			 * I have found the pin where the i8259 is connected.
+			 */
+			if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) {
+				ioapic_i8259.apic = apic;
+				ioapic_i8259.pin  = pin;
+				goto found_i8259;
+			}
+		}
+	}
+ found_i8259:
+	/* Look to see what if the MP table has reported the ExtINT */
+	/* If we could not find the appropriate pin by looking at the ioapic
+	 * the i8259 probably is not connected the ioapic but give the
+	 * mptable a chance anyway.
+	 */
+	i8259_pin  = find_isa_irq_pin(0, mp_ExtINT);
+	i8259_apic = find_isa_irq_apic(0, mp_ExtINT);
+	/* Trust the MP table if nothing is setup in the hardware */
+	if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) {
+		printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n");
+		ioapic_i8259.pin  = i8259_pin;
+		ioapic_i8259.apic = i8259_apic;
+	}
+	/* Complain if the MP table and the hardware disagree */
+	if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) &&
+		(i8259_pin >= 0) && (ioapic_i8259.pin >= 0))
+	{
+		printk(KERN_WARNING "ExtINT in hardware and MP table differ\n");
 	}
 
 	/*
@@ -1628,7 +1699,6 @@ static void __init enable_IO_APIC(void)
  */
 void disable_IO_APIC(void)
 {
-	int pin;
 	/*
 	 * Clear the IO-APIC before rebooting:
 	 */
@@ -1639,8 +1709,7 @@ void disable_IO_APIC(void)
 	 * Put that IOAPIC in virtual wire mode
 	 * so legacy interrupts can be delivered.
 	 */
-	pin = find_isa_irq_pin(0, mp_ExtINT);
-	if (pin != -1) {
+	if (ioapic_i8259.pin != -1) {
 		struct IO_APIC_route_entry entry;
 		unsigned long flags;
 
@@ -1651,7 +1720,7 @@ void disable_IO_APIC(void)
 		entry.polarity        = 0; /* High */
 		entry.delivery_status = 0;
 		entry.dest_mode       = 0; /* Physical */
-		entry.delivery_mode   = 7; /* ExtInt */
+		entry.delivery_mode   = dest_ExtINT; /* ExtInt */
 		entry.vector          = 0;
 		entry.dest.physical.physical_dest = 0;
 
@@ -1660,11 +1729,13 @@ void disable_IO_APIC(void)
 		 * Add it to the IO-APIC irq-routing table:
 		 */
 		spin_lock_irqsave(&ioapic_lock, flags);
-		io_apic_write(0, 0x11+2*pin, *(((int *)&entry)+1));
-		io_apic_write(0, 0x10+2*pin, *(((int *)&entry)+0));
+		io_apic_write(ioapic_i8259.apic, 0x11+2*ioapic_i8259.pin,
+			*(((int *)&entry)+1));
+		io_apic_write(ioapic_i8259.apic, 0x10+2*ioapic_i8259.pin,
+			*(((int *)&entry)+0));
 		spin_unlock_irqrestore(&ioapic_lock, flags);
 	}
-	disconnect_bsp_APIC(pin != -1);
+	disconnect_bsp_APIC(ioapic_i8259.pin != -1);
 }
 
 /*
@@ -1938,7 +2009,7 @@ static void ack_edge_ioapic_vector(unsigned int vector)
 {
 	int irq = vector_to_irq(vector);
 
-	move_irq(vector);
+	move_native_irq(vector);
 	ack_edge_ioapic_irq(irq);
 }
 
@@ -1953,7 +2024,7 @@ static void end_level_ioapic_vector (unsigned int vector)
 {
 	int irq = vector_to_irq(vector);
 
-	move_irq(vector);
+	move_native_irq(vector);
 	end_level_ioapic_irq(irq);
 }
 
@@ -2114,20 +2185,21 @@ static void setup_nmi (void)
  */
 static inline void unlock_ExtINT_logic(void)
 {
-	int pin, i;
+	int apic, pin, i;
 	struct IO_APIC_route_entry entry0, entry1;
 	unsigned char save_control, save_freq_select;
 	unsigned long flags;
 
-	pin = find_isa_irq_pin(8, mp_INT);
+	pin  = find_isa_irq_pin(8, mp_INT);
+	apic = find_isa_irq_apic(8, mp_INT);
 	if (pin == -1)
 		return;
 
 	spin_lock_irqsave(&ioapic_lock, flags);
-	*(((int *)&entry0) + 1) = io_apic_read(0, 0x11 + 2 * pin);
-	*(((int *)&entry0) + 0) = io_apic_read(0, 0x10 + 2 * pin);
+	*(((int *)&entry0) + 1) = io_apic_read(apic, 0x11 + 2 * pin);
+	*(((int *)&entry0) + 0) = io_apic_read(apic, 0x10 + 2 * pin);
 	spin_unlock_irqrestore(&ioapic_lock, flags);
-	clear_IO_APIC_pin(0, pin);
+	clear_IO_APIC_pin(apic, pin);
 
 	memset(&entry1, 0, sizeof(entry1));
 
@@ -2140,8 +2212,8 @@ static inline void unlock_ExtINT_logic(void)
 	entry1.vector = 0;
 
 	spin_lock_irqsave(&ioapic_lock, flags);
-	io_apic_write(0, 0x11 + 2 * pin, *(((int *)&entry1) + 1));
-	io_apic_write(0, 0x10 + 2 * pin, *(((int *)&entry1) + 0));
+	io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry1) + 1));
+	io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry1) + 0));
 	spin_unlock_irqrestore(&ioapic_lock, flags);
 
 	save_control = CMOS_READ(RTC_CONTROL);
@@ -2159,11 +2231,11 @@ static inline void unlock_ExtINT_logic(void)
 
 	CMOS_WRITE(save_control, RTC_CONTROL);
 	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
-	clear_IO_APIC_pin(0, pin);
+	clear_IO_APIC_pin(apic, pin);
 
 	spin_lock_irqsave(&ioapic_lock, flags);
-	io_apic_write(0, 0x11 + 2 * pin, *(((int *)&entry0) + 1));
-	io_apic_write(0, 0x10 + 2 * pin, *(((int *)&entry0) + 0));
+	io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry0) + 1));
+	io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry0) + 0));
 	spin_unlock_irqrestore(&ioapic_lock, flags);
 }
 
@@ -2175,7 +2247,7 @@ static inline void unlock_ExtINT_logic(void)
  */
 static inline void check_timer(void)
 {
-	int pin1, pin2;
+	int apic1, pin1, apic2, pin2;
 	int vector;
 
 	/*
@@ -2197,10 +2269,13 @@ static inline void check_timer(void)
 	timer_ack = 1;
 	enable_8259A_irq(0);
 
-	pin1 = find_isa_irq_pin(0, mp_INT);
-	pin2 = find_isa_irq_pin(0, mp_ExtINT);
+	pin1  = find_isa_irq_pin(0, mp_INT);
+	apic1 = find_isa_irq_apic(0, mp_INT);
+	pin2  = ioapic_i8259.pin;
+	apic2 = ioapic_i8259.apic;
 
-	printk(KERN_INFO "..TIMER: vector=0x%02X pin1=%d pin2=%d\n", vector, pin1, pin2);
+	printk(KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
+		vector, apic1, pin1, apic2, pin2);
 
 	if (pin1 != -1) {
 		/*
@@ -2217,8 +2292,9 @@ static inline void check_timer(void)
 				clear_IO_APIC_pin(0, pin1);
 			return;
 		}
-		clear_IO_APIC_pin(0, pin1);
-		printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to IO-APIC\n");
+		clear_IO_APIC_pin(apic1, pin1);
+		printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to "
+				"IO-APIC\n");
 	}
 
 	printk(KERN_INFO "...trying to set up timer (IRQ0) through the 8259A ... ");
@@ -2227,13 +2303,13 @@ static inline void check_timer(void)
 		/*
 		 * legacy devices should be connected to IO APIC #0
 		 */
-		setup_ExtINT_IRQ0_pin(pin2, vector);
+		setup_ExtINT_IRQ0_pin(apic2, pin2, vector);
 		if (timer_irq_works()) {
 			printk("works.\n");
 			if (pin1 != -1)
-				replace_pin_at_irq(0, 0, pin1, 0, pin2);
+				replace_pin_at_irq(0, apic1, pin1, apic2, pin2);
 			else
-				add_pin_to_irq(0, 0, pin2);
+				add_pin_to_irq(0, apic2, pin2);
 			if (nmi_watchdog == NMI_IO_APIC) {
 				setup_nmi();
 			}
@@ -2242,7 +2318,7 @@ static inline void check_timer(void)
 		/*
 		 * Cleanup, just in case ...
 		 */
-		clear_IO_APIC_pin(0, pin2);
+		clear_IO_APIC_pin(apic2, pin2);
 	}
 	printk(" failed.\n");
 
diff --git a/arch/i386/kernel/ioport.c b/arch/i386/kernel/ioport.c
index f2b37654777f..b59a34dbe262 100644
--- a/arch/i386/kernel/ioport.c
+++ b/arch/i386/kernel/ioport.c
@@ -108,8 +108,11 @@ asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int turn_on)
 	/*
 	 * Sets the lazy trigger so that the next I/O operation will
 	 * reload the correct bitmap.
+	 * Reset the owner so that a process switch will not set
+	 * tss->io_bitmap_base to IO_BITMAP_OFFSET.
 	 */
 	tss->io_bitmap_base = INVALID_IO_BITMAP_OFFSET_LAZY;
+	tss->io_bitmap_owner = NULL;
 
 	put_cpu();
 
diff --git a/arch/i386/kernel/irq.c b/arch/i386/kernel/irq.c
index ce66dcc26d90..1a201a932865 100644
--- a/arch/i386/kernel/irq.c
+++ b/arch/i386/kernel/irq.c
@@ -218,7 +218,7 @@ int show_interrupts(struct seq_file *p, void *v)
 
 	if (i == 0) {
 		seq_printf(p, "           ");
-		for_each_cpu(j)
+		for_each_online_cpu(j)
 			seq_printf(p, "CPU%d       ",j);
 		seq_putc(p, '\n');
 	}
@@ -232,7 +232,7 @@ int show_interrupts(struct seq_file *p, void *v)
 #ifndef CONFIG_SMP
 		seq_printf(p, "%10u ", kstat_irqs(i));
 #else
-		for_each_cpu(j)
+		for_each_online_cpu(j)
 			seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
 #endif
 		seq_printf(p, " %14s", irq_desc[i].handler->typename);
@@ -246,12 +246,12 @@ skip:
 		spin_unlock_irqrestore(&irq_desc[i].lock, flags);
 	} else if (i == NR_IRQS) {
 		seq_printf(p, "NMI: ");
-		for_each_cpu(j)
+		for_each_online_cpu(j)
 			seq_printf(p, "%10u ", nmi_count(j));
 		seq_putc(p, '\n');
 #ifdef CONFIG_X86_LOCAL_APIC
 		seq_printf(p, "LOC: ");
-		for_each_cpu(j)
+		for_each_online_cpu(j)
 			seq_printf(p, "%10u ",
 				per_cpu(irq_stat,j).apic_timer_irqs);
 		seq_putc(p, '\n');
diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c
index 6345b430b105..32b0c24ab9a6 100644
--- a/arch/i386/kernel/kprobes.c
+++ b/arch/i386/kernel/kprobes.c
@@ -31,22 +31,16 @@
 #include <linux/config.h>
 #include <linux/kprobes.h>
 #include <linux/ptrace.h>
-#include <linux/spinlock.h>
 #include <linux/preempt.h>
 #include <asm/cacheflush.h>
 #include <asm/kdebug.h>
 #include <asm/desc.h>
 
-static struct kprobe *current_kprobe;
-static unsigned long kprobe_status, kprobe_old_eflags, kprobe_saved_eflags;
-static struct kprobe *kprobe_prev;
-static unsigned long kprobe_status_prev, kprobe_old_eflags_prev, kprobe_saved_eflags_prev;
-static struct pt_regs jprobe_saved_regs;
-static long *jprobe_saved_esp;
-/* copy of the kernel stack at the probe fire time */
-static kprobe_opcode_t jprobes_stack[MAX_STACK_SIZE];
 void jprobe_return_end(void);
 
+DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
+DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
+
 /*
  * returns non-zero if opcode modifies the interrupt flag.
  */
@@ -91,29 +85,30 @@ void __kprobes arch_remove_kprobe(struct kprobe *p)
 {
 }
 
-static inline void save_previous_kprobe(void)
+static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb)
 {
-	kprobe_prev = current_kprobe;
-	kprobe_status_prev = kprobe_status;
-	kprobe_old_eflags_prev = kprobe_old_eflags;
-	kprobe_saved_eflags_prev = kprobe_saved_eflags;
+	kcb->prev_kprobe.kp = kprobe_running();
+	kcb->prev_kprobe.status = kcb->kprobe_status;
+	kcb->prev_kprobe.old_eflags = kcb->kprobe_old_eflags;
+	kcb->prev_kprobe.saved_eflags = kcb->kprobe_saved_eflags;
 }
 
-static inline void restore_previous_kprobe(void)
+static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb)
 {
-	current_kprobe = kprobe_prev;
-	kprobe_status = kprobe_status_prev;
-	kprobe_old_eflags = kprobe_old_eflags_prev;
-	kprobe_saved_eflags = kprobe_saved_eflags_prev;
+	__get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp;
+	kcb->kprobe_status = kcb->prev_kprobe.status;
+	kcb->kprobe_old_eflags = kcb->prev_kprobe.old_eflags;
+	kcb->kprobe_saved_eflags = kcb->prev_kprobe.saved_eflags;
 }
 
-static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs)
+static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
+				struct kprobe_ctlblk *kcb)
 {
-	current_kprobe = p;
-	kprobe_saved_eflags = kprobe_old_eflags
+	__get_cpu_var(current_kprobe) = p;
+	kcb->kprobe_saved_eflags = kcb->kprobe_old_eflags
 		= (regs->eflags & (TF_MASK | IF_MASK));
 	if (is_IF_modifier(p->opcode))
-		kprobe_saved_eflags &= ~IF_MASK;
+		kcb->kprobe_saved_eflags &= ~IF_MASK;
 }
 
 static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
@@ -127,6 +122,7 @@ static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
 		regs->eip = (unsigned long)&p->ainsn.insn;
 }
 
+/* Called with kretprobe_lock held */
 void __kprobes arch_prepare_kretprobe(struct kretprobe *rp,
 				      struct pt_regs *regs)
 {
@@ -157,9 +153,15 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 	int ret = 0;
 	kprobe_opcode_t *addr = NULL;
 	unsigned long *lp;
+	struct kprobe_ctlblk *kcb;
 
-	/* We're in an interrupt, but this is clear and BUG()-safe. */
+	/*
+	 * We don't want to be preempted for the entire
+	 * duration of kprobe processing
+	 */
 	preempt_disable();
+	kcb = get_kprobe_ctlblk();
+
 	/* Check if the application is using LDT entry for its code segment and
 	 * calculate the address by reading the base address from the LDT entry.
 	 */
@@ -173,15 +175,12 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 	}
 	/* Check we're not actually recursing */
 	if (kprobe_running()) {
-		/* We *are* holding lock here, so this is safe.
-		   Disarm the probe we just hit, and ignore it. */
 		p = get_kprobe(addr);
 		if (p) {
-			if (kprobe_status == KPROBE_HIT_SS &&
+			if (kcb->kprobe_status == KPROBE_HIT_SS &&
 				*p->ainsn.insn == BREAKPOINT_INSTRUCTION) {
 				regs->eflags &= ~TF_MASK;
-				regs->eflags |= kprobe_saved_eflags;
-				unlock_kprobes();
+				regs->eflags |= kcb->kprobe_saved_eflags;
 				goto no_kprobe;
 			}
 			/* We have reentered the kprobe_handler(), since
@@ -190,26 +189,23 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 			 * just single step on the instruction of the new probe
 			 * without calling any user handlers.
 			 */
-			save_previous_kprobe();
-			set_current_kprobe(p, regs);
+			save_previous_kprobe(kcb);
+			set_current_kprobe(p, regs, kcb);
 			p->nmissed++;
 			prepare_singlestep(p, regs);
-			kprobe_status = KPROBE_REENTER;
+			kcb->kprobe_status = KPROBE_REENTER;
 			return 1;
 		} else {
-			p = current_kprobe;
+			p = __get_cpu_var(current_kprobe);
 			if (p->break_handler && p->break_handler(p, regs)) {
 				goto ss_probe;
 			}
 		}
-		/* If it's not ours, can't be delete race, (we hold lock). */
 		goto no_kprobe;
 	}
 
-	lock_kprobes();
 	p = get_kprobe(addr);
 	if (!p) {
-		unlock_kprobes();
 		if (regs->eflags & VM_MASK) {
 			/* We are in virtual-8086 mode. Return 0 */
 			goto no_kprobe;
@@ -232,8 +228,8 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 		goto no_kprobe;
 	}
 
-	kprobe_status = KPROBE_HIT_ACTIVE;
-	set_current_kprobe(p, regs);
+	set_current_kprobe(p, regs, kcb);
+	kcb->kprobe_status = KPROBE_HIT_ACTIVE;
 
 	if (p->pre_handler && p->pre_handler(p, regs))
 		/* handler has already set things up, so skip ss setup */
@@ -241,7 +237,7 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 
 ss_probe:
 	prepare_singlestep(p, regs);
-	kprobe_status = KPROBE_HIT_SS;
+	kcb->kprobe_status = KPROBE_HIT_SS;
 	return 1;
 
 no_kprobe:
@@ -269,9 +265,10 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
         struct kretprobe_instance *ri = NULL;
         struct hlist_head *head;
         struct hlist_node *node, *tmp;
-	unsigned long orig_ret_address = 0;
+	unsigned long flags, orig_ret_address = 0;
 	unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline;
 
+	spin_lock_irqsave(&kretprobe_lock, flags);
         head = kretprobe_inst_table_head(current);
 
 	/*
@@ -310,14 +307,15 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 	BUG_ON(!orig_ret_address || (orig_ret_address == trampoline_address));
 	regs->eip = orig_ret_address;
 
-	unlock_kprobes();
+	reset_current_kprobe();
+	spin_unlock_irqrestore(&kretprobe_lock, flags);
 	preempt_enable_no_resched();
 
-        /*
-         * By returning a non-zero value, we are telling
-         * kprobe_handler() that we have handled unlocking
-         * and re-enabling preemption.
-         */
+	/*
+	 * By returning a non-zero value, we are telling
+	 * kprobe_handler() that we don't want the post_handler
+	 * to run (and have re-enabled preemption)
+	 */
         return 1;
 }
 
@@ -343,7 +341,8 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
  * that is atop the stack is the address following the copied instruction.
  * We need to make it the address following the original instruction.
  */
-static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs)
+static void __kprobes resume_execution(struct kprobe *p,
+		struct pt_regs *regs, struct kprobe_ctlblk *kcb)
 {
 	unsigned long *tos = (unsigned long *)&regs->esp;
 	unsigned long next_eip = 0;
@@ -353,7 +352,7 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs)
 	switch (p->ainsn.insn[0]) {
 	case 0x9c:		/* pushfl */
 		*tos &= ~(TF_MASK | IF_MASK);
-		*tos |= kprobe_old_eflags;
+		*tos |= kcb->kprobe_old_eflags;
 		break;
 	case 0xc3:		/* ret/lret */
 	case 0xcb:
@@ -394,27 +393,30 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs)
 
 /*
  * Interrupts are disabled on entry as trap1 is an interrupt gate and they
- * remain disabled thoroughout this function.  And we hold kprobe lock.
+ * remain disabled thoroughout this function.
  */
 static inline int post_kprobe_handler(struct pt_regs *regs)
 {
-	if (!kprobe_running())
+	struct kprobe *cur = kprobe_running();
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	if (!cur)
 		return 0;
 
-	if ((kprobe_status != KPROBE_REENTER) && current_kprobe->post_handler) {
-		kprobe_status = KPROBE_HIT_SSDONE;
-		current_kprobe->post_handler(current_kprobe, regs, 0);
+	if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) {
+		kcb->kprobe_status = KPROBE_HIT_SSDONE;
+		cur->post_handler(cur, regs, 0);
 	}
 
-	resume_execution(current_kprobe, regs);
-	regs->eflags |= kprobe_saved_eflags;
+	resume_execution(cur, regs, kcb);
+	regs->eflags |= kcb->kprobe_saved_eflags;
 
 	/*Restore back the original saved kprobes variables and continue. */
-	if (kprobe_status == KPROBE_REENTER) {
-		restore_previous_kprobe();
+	if (kcb->kprobe_status == KPROBE_REENTER) {
+		restore_previous_kprobe(kcb);
 		goto out;
 	}
-	unlock_kprobes();
+	reset_current_kprobe();
 out:
 	preempt_enable_no_resched();
 
@@ -429,18 +431,19 @@ out:
 	return 1;
 }
 
-/* Interrupts disabled, kprobe_lock held. */
 static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr)
 {
-	if (current_kprobe->fault_handler
-	    && current_kprobe->fault_handler(current_kprobe, regs, trapnr))
+	struct kprobe *cur = kprobe_running();
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr))
 		return 1;
 
-	if (kprobe_status & KPROBE_HIT_SS) {
-		resume_execution(current_kprobe, regs);
-		regs->eflags |= kprobe_old_eflags;
+	if (kcb->kprobe_status & KPROBE_HIT_SS) {
+		resume_execution(cur, regs, kcb);
+		regs->eflags |= kcb->kprobe_old_eflags;
 
-		unlock_kprobes();
+		reset_current_kprobe();
 		preempt_enable_no_resched();
 	}
 	return 0;
@@ -453,39 +456,41 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
 				       unsigned long val, void *data)
 {
 	struct die_args *args = (struct die_args *)data;
+	int ret = NOTIFY_DONE;
+
 	switch (val) {
 	case DIE_INT3:
 		if (kprobe_handler(args->regs))
-			return NOTIFY_STOP;
+			ret = NOTIFY_STOP;
 		break;
 	case DIE_DEBUG:
 		if (post_kprobe_handler(args->regs))
-			return NOTIFY_STOP;
+			ret = NOTIFY_STOP;
 		break;
 	case DIE_GPF:
-		if (kprobe_running() &&
-		    kprobe_fault_handler(args->regs, args->trapnr))
-			return NOTIFY_STOP;
-		break;
 	case DIE_PAGE_FAULT:
+		/* kprobe_running() needs smp_processor_id() */
+		preempt_disable();
 		if (kprobe_running() &&
 		    kprobe_fault_handler(args->regs, args->trapnr))
-			return NOTIFY_STOP;
+			ret = NOTIFY_STOP;
+		preempt_enable();
 		break;
 	default:
 		break;
 	}
-	return NOTIFY_DONE;
+	return ret;
 }
 
 int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
 {
 	struct jprobe *jp = container_of(p, struct jprobe, kp);
 	unsigned long addr;
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
 
-	jprobe_saved_regs = *regs;
-	jprobe_saved_esp = &regs->esp;
-	addr = (unsigned long)jprobe_saved_esp;
+	kcb->jprobe_saved_regs = *regs;
+	kcb->jprobe_saved_esp = &regs->esp;
+	addr = (unsigned long)(kcb->jprobe_saved_esp);
 
 	/*
 	 * TBD: As Linus pointed out, gcc assumes that the callee
@@ -494,7 +499,8 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
 	 * we also save and restore enough stack bytes to cover
 	 * the argument area.
 	 */
-	memcpy(jprobes_stack, (kprobe_opcode_t *) addr, MIN_STACK_SIZE(addr));
+	memcpy(kcb->jprobes_stack, (kprobe_opcode_t *)addr,
+			MIN_STACK_SIZE(addr));
 	regs->eflags &= ~IF_MASK;
 	regs->eip = (unsigned long)(jp->entry);
 	return 1;
@@ -502,36 +508,40 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
 
 void __kprobes jprobe_return(void)
 {
-	preempt_enable_no_resched();
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
 	asm volatile ("       xchgl   %%ebx,%%esp     \n"
 		      "       int3			\n"
 		      "       .globl jprobe_return_end	\n"
 		      "       jprobe_return_end:	\n"
 		      "       nop			\n"::"b"
-		      (jprobe_saved_esp):"memory");
+		      (kcb->jprobe_saved_esp):"memory");
 }
 
 int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
 {
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
 	u8 *addr = (u8 *) (regs->eip - 1);
-	unsigned long stack_addr = (unsigned long)jprobe_saved_esp;
+	unsigned long stack_addr = (unsigned long)(kcb->jprobe_saved_esp);
 	struct jprobe *jp = container_of(p, struct jprobe, kp);
 
 	if ((addr > (u8 *) jprobe_return) && (addr < (u8 *) jprobe_return_end)) {
-		if (&regs->esp != jprobe_saved_esp) {
+		if (&regs->esp != kcb->jprobe_saved_esp) {
 			struct pt_regs *saved_regs =
-			    container_of(jprobe_saved_esp, struct pt_regs, esp);
+			    container_of(kcb->jprobe_saved_esp,
+					    struct pt_regs, esp);
 			printk("current esp %p does not match saved esp %p\n",
-			       &regs->esp, jprobe_saved_esp);
+			       &regs->esp, kcb->jprobe_saved_esp);
 			printk("Saved registers for jprobe %p\n", jp);
 			show_registers(saved_regs);
 			printk("Current registers\n");
 			show_registers(regs);
 			BUG();
 		}
-		*regs = jprobe_saved_regs;
-		memcpy((kprobe_opcode_t *) stack_addr, jprobes_stack,
+		*regs = kcb->jprobe_saved_regs;
+		memcpy((kprobe_opcode_t *) stack_addr, kcb->jprobes_stack,
 		       MIN_STACK_SIZE(stack_addr));
+		preempt_enable_no_resched();
 		return 1;
 	}
 	return 0;
diff --git a/arch/i386/kernel/ldt.c b/arch/i386/kernel/ldt.c
index fe1ffa55587d..983f95707e11 100644
--- a/arch/i386/kernel/ldt.c
+++ b/arch/i386/kernel/ldt.c
@@ -18,6 +18,7 @@
 #include <asm/system.h>
 #include <asm/ldt.h>
 #include <asm/desc.h>
+#include <asm/mmu_context.h>
 
 #ifdef CONFIG_SMP /* avoids "defined but not used" warnig */
 static void flush_ldt(void *null)
diff --git a/arch/i386/kernel/mca.c b/arch/i386/kernel/mca.c
index 8600faeea29d..558bb207720f 100644
--- a/arch/i386/kernel/mca.c
+++ b/arch/i386/kernel/mca.c
@@ -132,7 +132,7 @@ static struct resource mca_standard_resources[] = {
 	{ .start = 0x100, .end = 0x107, .name = "POS (MCA)" }
 };
 
-#define MCA_STANDARD_RESOURCES	(sizeof(mca_standard_resources)/sizeof(struct resource))
+#define MCA_STANDARD_RESOURCES	ARRAY_SIZE(mca_standard_resources)
 
 /**
  *	mca_read_and_store_pos - read the POS registers into a memory buffer
diff --git a/arch/i386/kernel/mpparse.c b/arch/i386/kernel/mpparse.c
index 15949fd08109..1ca5269b1e86 100644
--- a/arch/i386/kernel/mpparse.c
+++ b/arch/i386/kernel/mpparse.c
@@ -14,7 +14,6 @@
  */
 
 #include <linux/mm.h>
-#include <linux/irq.h>
 #include <linux/init.h>
 #include <linux/acpi.h>
 #include <linux/delay.h>
@@ -70,7 +69,7 @@ unsigned int def_to_bigsmp = 0;
 /* Processor that is doing the boot up */
 unsigned int boot_cpu_physical_apicid = -1U;
 /* Internal processor count */
-static unsigned int __initdata num_processors;
+static unsigned int __devinitdata num_processors;
 
 /* Bitmask of physically existing CPUs */
 physid_mask_t phys_cpu_present_map;
@@ -120,7 +119,7 @@ static int MP_valid_apicid(int apicid, int version)
 }
 #endif
 
-static void __init MP_processor_info (struct mpc_config_processor *m)
+static void __devinit MP_processor_info (struct mpc_config_processor *m)
 {
  	int ver, apicid;
 	physid_mask_t phys_cpu;
@@ -183,17 +182,6 @@ static void __init MP_processor_info (struct mpc_config_processor *m)
 		boot_cpu_physical_apicid = m->mpc_apicid;
 	}
 
-	if (num_processors >= NR_CPUS) {
-		printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
-			"  Processor ignored.\n", NR_CPUS); 
-		return;
-	}
-
-	if (num_processors >= maxcpus) {
-		printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
-			" Processor ignored.\n", maxcpus); 
-		return;
-	}
 	ver = m->mpc_apicver;
 
 	if (!MP_valid_apicid(apicid, ver)) {
@@ -202,11 +190,6 @@ static void __init MP_processor_info (struct mpc_config_processor *m)
 		return;
 	}
 
-	cpu_set(num_processors, cpu_possible_map);
-	num_processors++;
-	phys_cpu = apicid_to_cpu_present(apicid);
-	physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu);
-
 	/*
 	 * Validate version
 	 */
@@ -217,9 +200,29 @@ static void __init MP_processor_info (struct mpc_config_processor *m)
 		ver = 0x10;
 	}
 	apic_version[m->mpc_apicid] = ver;
+
+	phys_cpu = apicid_to_cpu_present(apicid);
+	physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu);
+
+	if (num_processors >= NR_CPUS) {
+		printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
+			"  Processor ignored.\n", NR_CPUS);
+		return;
+	}
+
+	if (num_processors >= maxcpus) {
+		printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
+			" Processor ignored.\n", maxcpus);
+		return;
+	}
+
+	cpu_set(num_processors, cpu_possible_map);
+	num_processors++;
+
 	if ((num_processors > 8) &&
-	    APIC_XAPIC(ver) &&
-	    (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL))
+	    ((APIC_XAPIC(ver) &&
+	     (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)) ||
+	     (boot_cpu_data.x86_vendor == X86_VENDOR_AMD)))
 		def_to_bigsmp = 1;
 	else
 		def_to_bigsmp = 0;
@@ -835,7 +838,7 @@ void __init mp_register_lapic_address (
 }
 
 
-void __init mp_register_lapic (
+void __devinit mp_register_lapic (
 	u8			id, 
 	u8			enabled)
 {
diff --git a/arch/i386/kernel/msr.c b/arch/i386/kernel/msr.c
index 03100d6fc5d6..44470fea4309 100644
--- a/arch/i386/kernel/msr.c
+++ b/arch/i386/kernel/msr.c
@@ -246,7 +246,7 @@ static int msr_class_device_create(int i)
 	int err = 0;
 	struct class_device *class_err;
 
-	class_err = class_device_create(msr_class, MKDEV(MSR_MAJOR, i), NULL, "msr%d",i);
+	class_err = class_device_create(msr_class, NULL, MKDEV(MSR_MAJOR, i), NULL, "msr%d",i);
 	if (IS_ERR(class_err)) 
 		err = PTR_ERR(class_err);
 	return err;
diff --git a/arch/i386/kernel/nmi.c b/arch/i386/kernel/nmi.c
index 0178457db721..d661703ac1cb 100644
--- a/arch/i386/kernel/nmi.c
+++ b/arch/i386/kernel/nmi.c
@@ -15,7 +15,6 @@
 
 #include <linux/config.h>
 #include <linux/mm.h>
-#include <linux/irq.h>
 #include <linux/delay.h>
 #include <linux/bootmem.h>
 #include <linux/smp_lock.h>
@@ -101,16 +100,44 @@ int nmi_active;
 	(P4_CCCR_OVF_PMI0|P4_CCCR_THRESHOLD(15)|P4_CCCR_COMPLEMENT|	\
 	 P4_CCCR_COMPARE|P4_CCCR_REQUIRED|P4_CCCR_ESCR_SELECT(4)|P4_CCCR_ENABLE)
 
+#ifdef CONFIG_SMP
+/* The performance counters used by NMI_LOCAL_APIC don't trigger when
+ * the CPU is idle. To make sure the NMI watchdog really ticks on all
+ * CPUs during the test make them busy.
+ */
+static __init void nmi_cpu_busy(void *data)
+{
+	volatile int *endflag = data;
+	local_irq_enable();
+	/* Intentionally don't use cpu_relax here. This is
+	   to make sure that the performance counter really ticks,
+	   even if there is a simulator or similar that catches the
+	   pause instruction. On a real HT machine this is fine because
+	   all other CPUs are busy with "useless" delay loops and don't
+	   care if they get somewhat less cycles. */
+	while (*endflag == 0)
+		barrier();
+}
+#endif
+
 static int __init check_nmi_watchdog(void)
 {
-	unsigned int prev_nmi_count[NR_CPUS];
+	volatile int endflag = 0;
+	unsigned int *prev_nmi_count;
 	int cpu;
 
 	if (nmi_watchdog == NMI_NONE)
 		return 0;
 
+	prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL);
+	if (!prev_nmi_count)
+		return -1;
+
 	printk(KERN_INFO "Testing NMI watchdog ... ");
 
+	if (nmi_watchdog == NMI_LOCAL_APIC)
+		smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0);
+
 	for (cpu = 0; cpu < NR_CPUS; cpu++)
 		prev_nmi_count[cpu] = per_cpu(irq_stat, cpu).__nmi_count;
 	local_irq_enable();
@@ -124,12 +151,18 @@ static int __init check_nmi_watchdog(void)
 			continue;
 #endif
 		if (nmi_count(cpu) - prev_nmi_count[cpu] <= 5) {
-			printk("CPU#%d: NMI appears to be stuck!\n", cpu);
+			endflag = 1;
+			printk("CPU#%d: NMI appears to be stuck (%d->%d)!\n",
+				cpu,
+				prev_nmi_count[cpu],
+				nmi_count(cpu));
 			nmi_active = 0;
 			lapic_nmi_owner &= ~LAPIC_NMI_WATCHDOG;
+			kfree(prev_nmi_count);
 			return -1;
 		}
 	}
+	endflag = 1;
 	printk("OK.\n");
 
 	/* now that we know it works we can reduce NMI frequency to
@@ -137,6 +170,7 @@ static int __init check_nmi_watchdog(void)
 	if (nmi_watchdog == NMI_LOCAL_APIC)
 		nmi_hz = 1;
 
+	kfree(prev_nmi_count);
 	return 0;
 }
 /* This needs to happen later in boot so counters are working */
diff --git a/arch/i386/kernel/pci-dma.c b/arch/i386/kernel/pci-dma.c
index 1e51427cc9eb..25fe66853934 100644
--- a/arch/i386/kernel/pci-dma.c
+++ b/arch/i386/kernel/pci-dma.c
@@ -23,7 +23,7 @@ struct dma_coherent_mem {
 };
 
 void *dma_alloc_coherent(struct device *dev, size_t size,
-			   dma_addr_t *dma_handle, unsigned int __nocast gfp)
+			   dma_addr_t *dma_handle, gfp_t gfp)
 {
 	void *ret;
 	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c
index b45cbf93d439..df6c2bcde067 100644
--- a/arch/i386/kernel/process.c
+++ b/arch/i386/kernel/process.c
@@ -47,13 +47,11 @@
 #include <asm/ldt.h>
 #include <asm/processor.h>
 #include <asm/i387.h>
-#include <asm/irq.h>
 #include <asm/desc.h>
 #ifdef CONFIG_MATH_EMULATION
 #include <asm/math_emu.h>
 #endif
 
-#include <linux/irq.h>
 #include <linux/err.h>
 
 #include <asm/tlbflush.h>
@@ -101,14 +99,22 @@ EXPORT_SYMBOL(enable_hlt);
  */
 void default_idle(void)
 {
+	local_irq_enable();
+
 	if (!hlt_counter && boot_cpu_data.hlt_works_ok) {
-		local_irq_disable();
-		if (!need_resched())
-			safe_halt();
-		else
-			local_irq_enable();
+		clear_thread_flag(TIF_POLLING_NRFLAG);
+		smp_mb__after_clear_bit();
+		while (!need_resched()) {
+			local_irq_disable();
+			if (!need_resched())
+				safe_halt();
+			else
+				local_irq_enable();
+		}
+		set_thread_flag(TIF_POLLING_NRFLAG);
 	} else {
-		cpu_relax();
+		while (!need_resched())
+			cpu_relax();
 	}
 }
 #ifdef CONFIG_APM_MODULE
@@ -122,29 +128,14 @@ EXPORT_SYMBOL(default_idle);
  */
 static void poll_idle (void)
 {
-	int oldval;
-
 	local_irq_enable();
 
-	/*
-	 * Deal with another CPU just having chosen a thread to
-	 * run here:
-	 */
-	oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED);
-
-	if (!oldval) {
-		set_thread_flag(TIF_POLLING_NRFLAG);
-		asm volatile(
-			"2:"
-			"testl %0, %1;"
-			"rep; nop;"
-			"je 2b;"
-			: : "i"(_TIF_NEED_RESCHED), "m" (current_thread_info()->flags));
-
-		clear_thread_flag(TIF_POLLING_NRFLAG);
-	} else {
-		set_need_resched();
-	}
+	asm volatile(
+		"2:"
+		"testl %0, %1;"
+		"rep; nop;"
+		"je 2b;"
+		: : "i"(_TIF_NEED_RESCHED), "m" (current_thread_info()->flags));
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
@@ -181,7 +172,9 @@ static inline void play_dead(void)
  */
 void cpu_idle(void)
 {
-	int cpu = raw_smp_processor_id();
+	int cpu = smp_processor_id();
+
+	set_thread_flag(TIF_POLLING_NRFLAG);
 
 	/* endless idle loop with no priority at all */
 	while (1) {
@@ -203,7 +196,9 @@ void cpu_idle(void)
 			__get_cpu_var(irq_stat).idle_timestamp = jiffies;
 			idle();
 		}
+		preempt_enable_no_resched();
 		schedule();
+		preempt_disable();
 	}
 }
 
@@ -246,15 +241,12 @@ static void mwait_idle(void)
 {
 	local_irq_enable();
 
-	if (!need_resched()) {
-		set_thread_flag(TIF_POLLING_NRFLAG);
-		do {
-			__monitor((void *)&current_thread_info()->flags, 0, 0);
-			if (need_resched())
-				break;
-			__mwait(0, 0);
-		} while (!need_resched());
-		clear_thread_flag(TIF_POLLING_NRFLAG);
+	while (!need_resched()) {
+		__monitor((void *)&current_thread_info()->flags, 0, 0);
+		smp_mb();
+		if (need_resched())
+			break;
+		__mwait(0, 0);
 	}
 }
 
@@ -401,13 +393,6 @@ void flush_thread(void)
 {
 	struct task_struct *tsk = current;
 
-	/*
-	 * Remove function-return probe instances associated with this task
-	 * and put them back on the free list. Do not insert an exit probe for
-	 * this function, it will be disabled by kprobe_flush_task if you do.
-	 */
-	kprobe_flush_task(tsk);
-
 	memset(tsk->thread.debugreg, 0, sizeof(unsigned long)*8);
 	memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array));	
 	/*
diff --git a/arch/i386/kernel/ptrace.c b/arch/i386/kernel/ptrace.c
index 7b6368bf8974..5ffbb4b7ad05 100644
--- a/arch/i386/kernel/ptrace.c
+++ b/arch/i386/kernel/ptrace.c
@@ -354,49 +354,12 @@ ptrace_set_thread_area(struct task_struct *child,
 	return 0;
 }
 
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
-	struct task_struct *child;
 	struct user * dummy = NULL;
 	int i, ret;
 	unsigned long __user *datap = (unsigned long __user *)data;
 
-	lock_kernel();
-	ret = -EPERM;
-	if (request == PTRACE_TRACEME) {
-		/* are we already being traced? */
-		if (current->ptrace & PT_PTRACED)
-			goto out;
-		ret = security_ptrace(current->parent, current);
-		if (ret)
-			goto out;
-		/* set the ptrace bit in the process flags. */
-		current->ptrace |= PT_PTRACED;
-		ret = 0;
-		goto out;
-	}
-	ret = -ESRCH;
-	read_lock(&tasklist_lock);
-	child = find_task_by_pid(pid);
-	if (child)
-		get_task_struct(child);
-	read_unlock(&tasklist_lock);
-	if (!child)
-		goto out;
-
-	ret = -EPERM;
-	if (pid == 1)		/* you may not mess with init */
-		goto out_tsk;
-
-	if (request == PTRACE_ATTACH) {
-		ret = ptrace_attach(child);
-		goto out_tsk;
-	}
-
-	ret = ptrace_check_attach(child, request == PTRACE_KILL);
-	if (ret < 0)
-		goto out_tsk;
-
 	switch (request) {
 	/* when I and D space are separate, these will need to be fixed. */
 	case PTRACE_PEEKTEXT: /* read word at location addr. */ 
@@ -663,10 +626,7 @@ asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
 		ret = ptrace_request(child, request, addr, data);
 		break;
 	}
-out_tsk:
-	put_task_struct(child);
-out:
-	unlock_kernel();
+ out_tsk:
 	return ret;
 }
 
diff --git a/arch/i386/kernel/reboot.c b/arch/i386/kernel/reboot.c
index 350ea6680f63..2afe0f8d555a 100644
--- a/arch/i386/kernel/reboot.c
+++ b/arch/i386/kernel/reboot.c
@@ -111,6 +111,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2400"),
 		},
 	},
+	{	/* Handle problems with rebooting on HP nc6120 */
+		.callback = set_bios_reboot,
+		.ident = "HP Compaq nc6120",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nc6120"),
+		},
+	},
 	{ }
 };
 
diff --git a/arch/i386/kernel/reboot_fixups.c b/arch/i386/kernel/reboot_fixups.c
index 1b183b378c2c..10e21a4773dd 100644
--- a/arch/i386/kernel/reboot_fixups.c
+++ b/arch/i386/kernel/reboot_fixups.c
@@ -10,6 +10,7 @@
 
 #include <asm/delay.h>
 #include <linux/pci.h>
+#include <linux/reboot_fixups.h>
 
 static void cs5530a_warm_reset(struct pci_dev *dev)
 {
@@ -42,9 +43,9 @@ void mach_reboot_fixups(void)
 	struct pci_dev *dev;
 	int i;
 
-	for (i=0; i < (sizeof(fixups_table)/sizeof(fixups_table[0])); i++) {
+	for (i=0; i < ARRAY_SIZE(fixups_table); i++) {
 		cur = &(fixups_table[i]);
-		dev = pci_get_device(cur->vendor, cur->device, 0);
+		dev = pci_get_device(cur->vendor, cur->device, NULL);
 		if (!dev)
 			continue;
 
diff --git a/arch/i386/kernel/scx200.c b/arch/i386/kernel/scx200.c
index 69e203a0d330..9c968ae67c43 100644
--- a/arch/i386/kernel/scx200.c
+++ b/arch/i386/kernel/scx200.c
@@ -12,6 +12,7 @@
 #include <linux/pci.h>
 
 #include <linux/scx200.h>
+#include <linux/scx200_gpio.h>
 
 /* Verify that the configuration block really is there */
 #define scx200_cb_probe(base) (inw((base) + SCx200_CBA) == (base))
diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c
index 9b8c8a19824d..fdfcb0cba9b4 100644
--- a/arch/i386/kernel/setup.c
+++ b/arch/i386/kernel/setup.c
@@ -129,9 +129,7 @@ struct drive_info_struct { char dummy[32]; } drive_info;
 EXPORT_SYMBOL(drive_info);
 #endif
 struct screen_info screen_info;
-#ifdef CONFIG_VT
 EXPORT_SYMBOL(screen_info);
-#endif
 struct apm_info apm_info;
 EXPORT_SYMBOL(apm_info);
 struct sys_desc_table_struct {
@@ -389,14 +387,24 @@ static void __init limit_regions(unsigned long long size)
 		}
 	}
 	for (i = 0; i < e820.nr_map; i++) {
-		if (e820.map[i].type == E820_RAM) {
-			current_addr = e820.map[i].addr + e820.map[i].size;
-			if (current_addr >= size) {
-				e820.map[i].size -= current_addr-size;
-				e820.nr_map = i + 1;
-				return;
-			}
+		current_addr = e820.map[i].addr + e820.map[i].size;
+		if (current_addr < size)
+			continue;
+
+		if (e820.map[i].type != E820_RAM)
+			continue;
+
+		if (e820.map[i].addr >= size) {
+			/*
+			 * This region starts past the end of the
+			 * requested size, skip it completely.
+			 */
+			e820.nr_map = i;
+		} else {
+			e820.nr_map = i + 1;
+			e820.map[i].size -= current_addr - size;
 		}
+		return;
 	}
 }
 
diff --git a/arch/i386/kernel/signal.c b/arch/i386/kernel/signal.c
index 61eb0c8a6e47..adcd069db91e 100644
--- a/arch/i386/kernel/signal.c
+++ b/arch/i386/kernel/signal.c
@@ -338,7 +338,11 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
 		esp = (unsigned long) ka->sa.sa_restorer;
 	}
 
-	return (void __user *)((esp - frame_size) & -8ul);
+	esp -= frame_size;
+	/* Align the stack pointer according to the i386 ABI,
+	 * i.e. so that on function entry ((sp + 4) & 15) == 0. */
+	esp = ((esp + 4) & -16ul) - 4;
+	return (void __user *) esp;
 }
 
 /* These symbols are defined with the addresses in the vsyscall page.
diff --git a/arch/i386/kernel/smp.c b/arch/i386/kernel/smp.c
index 48b55db3680f..218d725a5a1e 100644
--- a/arch/i386/kernel/smp.c
+++ b/arch/i386/kernel/smp.c
@@ -11,7 +11,6 @@
 #include <linux/init.h>
 
 #include <linux/mm.h>
-#include <linux/irq.h>
 #include <linux/delay.h>
 #include <linux/spinlock.h>
 #include <linux/smp_lock.h>
diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c
index 5f0a95d76a4f..d16520da4550 100644
--- a/arch/i386/kernel/smpboot.c
+++ b/arch/i386/kernel/smpboot.c
@@ -42,7 +42,6 @@
 #include <linux/sched.h>
 #include <linux/kernel_stat.h>
 #include <linux/smp_lock.h>
-#include <linux/irq.h>
 #include <linux/bootmem.h>
 #include <linux/notifier.h>
 #include <linux/cpu.h>
@@ -69,15 +68,15 @@ EXPORT_SYMBOL(smp_num_siblings);
 
 /* Package ID of each logical CPU */
 int phys_proc_id[NR_CPUS] __read_mostly = {[0 ... NR_CPUS-1] = BAD_APICID};
-EXPORT_SYMBOL(phys_proc_id);
 
 /* Core ID of each logical CPU */
 int cpu_core_id[NR_CPUS] __read_mostly = {[0 ... NR_CPUS-1] = BAD_APICID};
-EXPORT_SYMBOL(cpu_core_id);
 
+/* representing HT siblings of each logical CPU */
 cpumask_t cpu_sibling_map[NR_CPUS] __read_mostly;
 EXPORT_SYMBOL(cpu_sibling_map);
 
+/* representing HT and core siblings of each logical CPU */
 cpumask_t cpu_core_map[NR_CPUS] __read_mostly;
 EXPORT_SYMBOL(cpu_core_map);
 
@@ -88,7 +87,11 @@ EXPORT_SYMBOL(cpu_online_map);
 cpumask_t cpu_callin_map;
 cpumask_t cpu_callout_map;
 EXPORT_SYMBOL(cpu_callout_map);
+#ifdef CONFIG_HOTPLUG_CPU
+cpumask_t cpu_possible_map = CPU_MASK_ALL;
+#else
 cpumask_t cpu_possible_map;
+#endif
 EXPORT_SYMBOL(cpu_possible_map);
 static cpumask_t smp_commenced_mask;
 
@@ -441,35 +444,60 @@ static void __devinit smp_callin(void)
 
 static int cpucount;
 
+/* representing cpus for which sibling maps can be computed */
+static cpumask_t cpu_sibling_setup_map;
+
 static inline void
 set_cpu_sibling_map(int cpu)
 {
 	int i;
+	struct cpuinfo_x86 *c = cpu_data;
+
+	cpu_set(cpu, cpu_sibling_setup_map);
 
 	if (smp_num_siblings > 1) {
-		for (i = 0; i < NR_CPUS; i++) {
-			if (!cpu_isset(i, cpu_callout_map))
-				continue;
-			if (cpu_core_id[cpu] == cpu_core_id[i]) {
+		for_each_cpu_mask(i, cpu_sibling_setup_map) {
+			if (phys_proc_id[cpu] == phys_proc_id[i] &&
+			    cpu_core_id[cpu] == cpu_core_id[i]) {
 				cpu_set(i, cpu_sibling_map[cpu]);
 				cpu_set(cpu, cpu_sibling_map[i]);
+				cpu_set(i, cpu_core_map[cpu]);
+				cpu_set(cpu, cpu_core_map[i]);
 			}
 		}
 	} else {
 		cpu_set(cpu, cpu_sibling_map[cpu]);
 	}
 
-	if (current_cpu_data.x86_num_cores > 1) {
-		for (i = 0; i < NR_CPUS; i++) {
-			if (!cpu_isset(i, cpu_callout_map))
-				continue;
-			if (phys_proc_id[cpu] == phys_proc_id[i]) {
-				cpu_set(i, cpu_core_map[cpu]);
-				cpu_set(cpu, cpu_core_map[i]);
-			}
-		}
-	} else {
+	if (current_cpu_data.x86_max_cores == 1) {
 		cpu_core_map[cpu] = cpu_sibling_map[cpu];
+		c[cpu].booted_cores = 1;
+		return;
+	}
+
+	for_each_cpu_mask(i, cpu_sibling_setup_map) {
+		if (phys_proc_id[cpu] == phys_proc_id[i]) {
+			cpu_set(i, cpu_core_map[cpu]);
+			cpu_set(cpu, cpu_core_map[i]);
+			/*
+			 *  Does this new cpu bringup a new core?
+			 */
+			if (cpus_weight(cpu_sibling_map[cpu]) == 1) {
+				/*
+				 * for each core in package, increment
+				 * the booted_cores for this new cpu
+				 */
+				if (first_cpu(cpu_sibling_map[i]) == i)
+					c[cpu].booted_cores++;
+				/*
+				 * increment the core count for all
+				 * the other cpus in this package
+				 */
+				if (i != cpu)
+					c[i].booted_cores++;
+			} else if (i != cpu && !c[cpu].booted_cores)
+				c[cpu].booted_cores = c[i].booted_cores;
+		}
 	}
 }
 
@@ -484,6 +512,7 @@ static void __devinit start_secondary(void *unused)
 	 * things done here to the most necessary things.
 	 */
 	cpu_init();
+	preempt_disable();
 	smp_callin();
 	while (!cpu_isset(smp_processor_id(), smp_commenced_mask))
 		rep_nop();
@@ -609,7 +638,7 @@ static inline void __inquire_remote_apic(int apicid)
 
 	printk("Inquiring remote APIC #%d...\n", apicid);
 
-	for (i = 0; i < sizeof(regs) / sizeof(*regs); i++) {
+	for (i = 0; i < ARRAY_SIZE(regs); i++) {
 		printk("... APIC #%d %s: ", apicid, names[i]);
 
 		/*
@@ -1093,11 +1122,8 @@ static void __init smp_boot_cpus(unsigned int max_cpus)
 
 	current_thread_info()->cpu = 0;
 	smp_tune_scheduling();
-	cpus_clear(cpu_sibling_map[0]);
-	cpu_set(0, cpu_sibling_map[0]);
 
-	cpus_clear(cpu_core_map[0]);
-	cpu_set(0, cpu_core_map[0]);
+	set_cpu_sibling_map(0);
 
 	/*
 	 * If we couldn't find an SMP configuration at boot time,
@@ -1276,15 +1302,24 @@ static void
 remove_siblinginfo(int cpu)
 {
 	int sibling;
+	struct cpuinfo_x86 *c = cpu_data;
 
+	for_each_cpu_mask(sibling, cpu_core_map[cpu]) {
+		cpu_clear(cpu, cpu_core_map[sibling]);
+		/*
+		 * last thread sibling in this cpu core going down
+		 */
+		if (cpus_weight(cpu_sibling_map[cpu]) == 1)
+			c[sibling].booted_cores--;
+	}
+			
 	for_each_cpu_mask(sibling, cpu_sibling_map[cpu])
 		cpu_clear(cpu, cpu_sibling_map[sibling]);
-	for_each_cpu_mask(sibling, cpu_core_map[cpu])
-		cpu_clear(cpu, cpu_core_map[sibling]);
 	cpus_clear(cpu_sibling_map[cpu]);
 	cpus_clear(cpu_core_map[cpu]);
 	phys_proc_id[cpu] = BAD_APICID;
 	cpu_core_id[cpu] = BAD_APICID;
+	cpu_clear(cpu, cpu_sibling_setup_map);
 }
 
 int __cpu_disable(void)
diff --git a/arch/i386/kernel/srat.c b/arch/i386/kernel/srat.c
index 516bf5653b02..52b3ed5d2cb5 100644
--- a/arch/i386/kernel/srat.c
+++ b/arch/i386/kernel/srat.c
@@ -137,8 +137,8 @@ static void __init parse_memory_affinity_structure (char *sratp)
 		 "enabled and removable" : "enabled" ) );
 }
 
-#if MAX_NR_ZONES != 3
-#error "MAX_NR_ZONES != 3, chunk_to_zone requires review"
+#if MAX_NR_ZONES != 4
+#error "MAX_NR_ZONES != 4, chunk_to_zone requires review"
 #endif
 /* Take a chunk of pages from page frame cstart to cend and count the number
  * of pages in each zone, returned via zones[].
@@ -327,7 +327,12 @@ int __init get_memcfg_from_srat(void)
 	int tables = 0;
 	int i = 0;
 
-	acpi_find_root_pointer(ACPI_PHYSICAL_ADDRESSING, rsdp_address);
+	if (ACPI_FAILURE(acpi_find_root_pointer(ACPI_PHYSICAL_ADDRESSING,
+						rsdp_address))) {
+		printk("%s: System description tables not found\n",
+		       __FUNCTION__);
+		goto out_err;
+	}
 
 	if (rsdp_address->pointer_type == ACPI_PHYSICAL_POINTER) {
 		printk("%s: assigning address to rsdp\n", __FUNCTION__);
diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c
index 2883a4d4f01f..41c5b2dc6200 100644
--- a/arch/i386/kernel/time.c
+++ b/arch/i386/kernel/time.c
@@ -74,10 +74,6 @@ int pit_latch_buggy;              /* extern */
 
 #include "do_timer.h"
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 unsigned int cpu_khz;	/* Detected as we calibrate the TSC */
 EXPORT_SYMBOL(cpu_khz);
 
diff --git a/arch/i386/kernel/time_hpet.c b/arch/i386/kernel/time_hpet.c
index 658c0629ba6a..9caeaa315cd7 100644
--- a/arch/i386/kernel/time_hpet.c
+++ b/arch/i386/kernel/time_hpet.c
@@ -275,6 +275,7 @@ static unsigned long PIE_freq = DEFAULT_RTC_INT_FREQ;
 static unsigned long PIE_count;
 
 static unsigned long hpet_rtc_int_freq; /* RTC interrupt frequency */
+static unsigned int hpet_t1_cmp; /* cached comparator register */
 
 /*
  * Timer 1 for RTC, we do not use periodic interrupt feature,
@@ -306,10 +307,12 @@ int hpet_rtc_timer_init(void)
 	cnt = hpet_readl(HPET_COUNTER);
 	cnt += ((hpet_tick*HZ)/hpet_rtc_int_freq);
 	hpet_writel(cnt, HPET_T1_CMP);
+	hpet_t1_cmp = cnt;
 	local_irq_restore(flags);
 
 	cfg = hpet_readl(HPET_T1_CFG);
-	cfg |= HPET_TN_ENABLE | HPET_TN_SETVAL | HPET_TN_32BIT;
+	cfg &= ~HPET_TN_PERIODIC;
+	cfg |= HPET_TN_ENABLE | HPET_TN_32BIT;
 	hpet_writel(cfg, HPET_T1_CFG);
 
 	return 1;
@@ -319,8 +322,12 @@ static void hpet_rtc_timer_reinit(void)
 {
 	unsigned int cfg, cnt;
 
-	if (!(PIE_on | AIE_on | UIE_on))
+	if (unlikely(!(PIE_on | AIE_on | UIE_on))) {
+		cfg = hpet_readl(HPET_T1_CFG);
+		cfg &= ~HPET_TN_ENABLE;
+		hpet_writel(cfg, HPET_T1_CFG);
 		return;
+	}
 
 	if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ))
 		hpet_rtc_int_freq = PIE_freq;
@@ -328,15 +335,10 @@ static void hpet_rtc_timer_reinit(void)
 		hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ;
 
 	/* It is more accurate to use the comparator value than current count.*/
-	cnt = hpet_readl(HPET_T1_CMP);
+	cnt = hpet_t1_cmp;
 	cnt += hpet_tick*HZ/hpet_rtc_int_freq;
 	hpet_writel(cnt, HPET_T1_CMP);
-
-	cfg = hpet_readl(HPET_T1_CFG);
-	cfg |= HPET_TN_ENABLE | HPET_TN_SETVAL | HPET_TN_32BIT;
-	hpet_writel(cfg, HPET_T1_CFG);
-
-	return;
+	hpet_t1_cmp = cnt;
 }
 
 /*
diff --git a/arch/i386/kernel/timers/timer_hpet.c b/arch/i386/kernel/timers/timer_hpet.c
index d973a8b681fd..be242723c339 100644
--- a/arch/i386/kernel/timers/timer_hpet.c
+++ b/arch/i386/kernel/timers/timer_hpet.c
@@ -30,23 +30,28 @@ static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED;
  *  basic equation:
  *		ns = cycles / (freq / ns_per_sec)
  *		ns = cycles * (ns_per_sec / freq)
- *		ns = cycles * (10^9 / (cpu_mhz * 10^6))
- *		ns = cycles * (10^3 / cpu_mhz)
+ *		ns = cycles * (10^9 / (cpu_khz * 10^3))
+ *		ns = cycles * (10^6 / cpu_khz)
  *
  *	Then we use scaling math (suggested by george@mvista.com) to get:
- *		ns = cycles * (10^3 * SC / cpu_mhz) / SC
+ *		ns = cycles * (10^6 * SC / cpu_khz) / SC
  *		ns = cycles * cyc2ns_scale / SC
  *
  *	And since SC is a constant power of two, we can convert the div
  *  into a shift.
+ *
+ *  We can use khz divisor instead of mhz to keep a better percision, since
+ *  cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
+ *  (mathieu.desnoyers@polymtl.ca)
+ *
  *			-johnstul@us.ibm.com "math is hard, lets go shopping!"
  */
 static unsigned long cyc2ns_scale;
 #define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
 
-static inline void set_cyc2ns_scale(unsigned long cpu_mhz)
+static inline void set_cyc2ns_scale(unsigned long cpu_khz)
 {
-	cyc2ns_scale = (1000 << CYC2NS_SCALE_FACTOR)/cpu_mhz;
+	cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz;
 }
 
 static inline unsigned long long cycles_2_ns(unsigned long long cyc)
@@ -163,7 +168,7 @@ static int __init init_hpet(char* override)
 				printk("Detected %u.%03u MHz processor.\n",
 					cpu_khz / 1000, cpu_khz % 1000);
 			}
-			set_cyc2ns_scale(cpu_khz/1000);
+			set_cyc2ns_scale(cpu_khz);
 		}
 		/* set this only when cpu_has_tsc */
 		timer_hpet.read_timer = read_timer_tsc;
diff --git a/arch/i386/kernel/timers/timer_pit.c b/arch/i386/kernel/timers/timer_pit.c
index eddb64038234..b9b6bd56b9ba 100644
--- a/arch/i386/kernel/timers/timer_pit.c
+++ b/arch/i386/kernel/timers/timer_pit.c
@@ -6,7 +6,6 @@
 #include <linux/spinlock.h>
 #include <linux/module.h>
 #include <linux/device.h>
-#include <linux/irq.h>
 #include <linux/sysdev.h>
 #include <linux/timex.h>
 #include <asm/delay.h>
@@ -26,8 +25,9 @@ static int __init init_pit(char* override)
 {
  	/* check clock override */
  	if (override[0] && strncmp(override,"pit",3))
- 		printk(KERN_ERR "Warning: clock= override failed. Defaulting to PIT\n");
- 
+ 		printk(KERN_ERR "Warning: clock= override failed. Defaulting "
+				"to PIT\n");
+ 	init_cpu_khz();
 	count_p = LATCH;
 	return 0;
 }
diff --git a/arch/i386/kernel/timers/timer_tsc.c b/arch/i386/kernel/timers/timer_tsc.c
index 6dd470cc9f72..d395e3b42485 100644
--- a/arch/i386/kernel/timers/timer_tsc.c
+++ b/arch/i386/kernel/timers/timer_tsc.c
@@ -49,23 +49,28 @@ static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED;
  *  basic equation:
  *		ns = cycles / (freq / ns_per_sec)
  *		ns = cycles * (ns_per_sec / freq)
- *		ns = cycles * (10^9 / (cpu_mhz * 10^6))
- *		ns = cycles * (10^3 / cpu_mhz)
+ *		ns = cycles * (10^9 / (cpu_khz * 10^3))
+ *		ns = cycles * (10^6 / cpu_khz)
  *
  *	Then we use scaling math (suggested by george@mvista.com) to get:
- *		ns = cycles * (10^3 * SC / cpu_mhz) / SC
+ *		ns = cycles * (10^6 * SC / cpu_khz) / SC
  *		ns = cycles * cyc2ns_scale / SC
  *
  *	And since SC is a constant power of two, we can convert the div
- *  into a shift.   
+ *  into a shift.
+ *
+ *  We can use khz divisor instead of mhz to keep a better percision, since
+ *  cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
+ *  (mathieu.desnoyers@polymtl.ca)
+ *
  *			-johnstul@us.ibm.com "math is hard, lets go shopping!"
  */
 static unsigned long cyc2ns_scale; 
 #define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
 
-static inline void set_cyc2ns_scale(unsigned long cpu_mhz)
+static inline void set_cyc2ns_scale(unsigned long cpu_khz)
 {
-	cyc2ns_scale = (1000 << CYC2NS_SCALE_FACTOR)/cpu_mhz;
+	cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz;
 }
 
 static inline unsigned long long cycles_2_ns(unsigned long long cyc)
@@ -286,7 +291,7 @@ time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
 		if (use_tsc) {
 			if (!(freq->flags & CPUFREQ_CONST_LOOPS)) {
 				fast_gettimeoffset_quotient = cpufreq_scale(fast_gettimeoffset_ref, freq->new, ref_freq);
-				set_cyc2ns_scale(cpu_khz/1000);
+				set_cyc2ns_scale(cpu_khz);
 			}
 		}
 #endif
@@ -536,7 +541,7 @@ static int __init init_tsc(char* override)
 				printk("Detected %u.%03u MHz processor.\n",
 					cpu_khz / 1000, cpu_khz % 1000);
 			}
-			set_cyc2ns_scale(cpu_khz/1000);
+			set_cyc2ns_scale(cpu_khz);
 			return 0;
 		}
 	}
diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c
index 431a551e46ea..c34d1bfc5161 100644
--- a/arch/i386/kernel/traps.c
+++ b/arch/i386/kernel/traps.c
@@ -52,7 +52,6 @@
 #include <asm/arch_hooks.h>
 #include <asm/kdebug.h>
 
-#include <linux/irq.h>
 #include <linux/module.h>
 
 #include "mach_traps.h"
@@ -489,6 +488,7 @@ fastcall void __kprobes do_general_protection(struct pt_regs * regs,
 				tss->io_bitmap_max - thread->io_bitmap_max);
 		tss->io_bitmap_max = thread->io_bitmap_max;
 		tss->io_bitmap_base = IO_BITMAP_OFFSET;
+		tss->io_bitmap_owner = thread;
 		put_cpu();
 		return;
 	}
diff --git a/arch/i386/kernel/vm86.c b/arch/i386/kernel/vm86.c
index 16b485009622..fc1993564f98 100644
--- a/arch/i386/kernel/vm86.c
+++ b/arch/i386/kernel/vm86.c
@@ -134,17 +134,16 @@ struct pt_regs * fastcall save_v86_state(struct kernel_vm86_regs * regs)
 	return ret;
 }
 
-static void mark_screen_rdonly(struct task_struct * tsk)
+static void mark_screen_rdonly(struct mm_struct *mm)
 {
 	pgd_t *pgd;
 	pud_t *pud;
 	pmd_t *pmd;
-	pte_t *pte, *mapped;
+	pte_t *pte;
+	spinlock_t *ptl;
 	int i;
 
-	preempt_disable();
-	spin_lock(&tsk->mm->page_table_lock);
-	pgd = pgd_offset(tsk->mm, 0xA0000);
+	pgd = pgd_offset(mm, 0xA0000);
 	if (pgd_none_or_clear_bad(pgd))
 		goto out;
 	pud = pud_offset(pgd, 0xA0000);
@@ -153,16 +152,14 @@ static void mark_screen_rdonly(struct task_struct * tsk)
 	pmd = pmd_offset(pud, 0xA0000);
 	if (pmd_none_or_clear_bad(pmd))
 		goto out;
-	pte = mapped = pte_offset_map(pmd, 0xA0000);
+	pte = pte_offset_map_lock(mm, pmd, 0xA0000, &ptl);
 	for (i = 0; i < 32; i++) {
 		if (pte_present(*pte))
 			set_pte(pte, pte_wrprotect(*pte));
 		pte++;
 	}
-	pte_unmap(mapped);
+	pte_unmap_unlock(pte, ptl);
 out:
-	spin_unlock(&tsk->mm->page_table_lock);
-	preempt_enable();
 	flush_tlb();
 }
 
@@ -306,7 +303,7 @@ static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk
 
 	tsk->thread.screen_bitmap = info->screen_bitmap;
 	if (info->flags & VM86_SCREEN_BITMAP)
-		mark_screen_rdonly(tsk);
+		mark_screen_rdonly(tsk->mm);
 	__asm__ __volatile__(
 		"xorl %%eax,%%eax; movl %%eax,%%fs; movl %%eax,%%gs\n\t"
 		"movl %0,%%esp\n\t"
diff --git a/arch/i386/mach-default/setup.c b/arch/i386/mach-default/setup.c
index e5a1a83d09ef..b4a7455c6993 100644
--- a/arch/i386/mach-default/setup.c
+++ b/arch/i386/mach-default/setup.c
@@ -5,7 +5,6 @@
 #include <linux/config.h>
 #include <linux/smp.h>
 #include <linux/init.h>
-#include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <asm/acpi.h>
 #include <asm/arch_hooks.h>
diff --git a/arch/i386/mach-es7000/es7000.h b/arch/i386/mach-es7000/es7000.h
index 898ed905e119..f1e3204f5dec 100644
--- a/arch/i386/mach-es7000/es7000.h
+++ b/arch/i386/mach-es7000/es7000.h
@@ -24,6 +24,15 @@
  * http://www.unisys.com
  */
 
+/*
+ * ES7000 chipsets
+ */
+
+#define NON_UNISYS		0
+#define ES7000_CLASSIC		1
+#define ES7000_ZORRO		2
+
+
 #define	MIP_REG			1
 #define	MIP_PSAI_REG		4
 
@@ -106,6 +115,6 @@ struct mip_reg {
 
 extern int parse_unisys_oem (char *oemptr);
 extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
-extern void setup_unisys ();
+extern void setup_unisys(void);
 extern int es7000_start_cpu(int cpu, unsigned long eip);
 extern void es7000_sw_apic(void);
diff --git a/arch/i386/mach-es7000/es7000plat.c b/arch/i386/mach-es7000/es7000plat.c
index dc6660511b07..a9ab0644f403 100644
--- a/arch/i386/mach-es7000/es7000plat.c
+++ b/arch/i386/mach-es7000/es7000plat.c
@@ -62,6 +62,9 @@ static unsigned int base;
 static int
 es7000_rename_gsi(int ioapic, int gsi)
 {
+	if (es7000_plat == ES7000_ZORRO)
+		return gsi;
+
 	if (!base) {
 		int i;
 		for (i = 0; i < nr_ioapics; i++)
@@ -76,7 +79,7 @@ es7000_rename_gsi(int ioapic, int gsi)
 #endif	/* (CONFIG_X86_IO_APIC) && (CONFIG_ACPI) */
 
 void __init
-setup_unisys ()
+setup_unisys(void)
 {
 	/*
 	 * Determine the generation of the ES7000 currently running.
@@ -86,9 +89,9 @@ setup_unisys ()
 	 *
 	 */
 	if (!(boot_cpu_data.x86 <= 15 && boot_cpu_data.x86_model <= 2))
-		es7000_plat = 2;
+		es7000_plat = ES7000_ZORRO;
 	else
-		es7000_plat = 1;
+		es7000_plat = ES7000_CLASSIC;
 	ioapic_renumber_irq = es7000_rename_gsi;
 }
 
@@ -151,7 +154,7 @@ parse_unisys_oem (char *oemptr)
 	}
 
 	if (success < 2) {
-		es7000_plat = 0;
+		es7000_plat = NON_UNISYS;
 	} else
 		setup_unisys();
 	return es7000_plat;
diff --git a/arch/i386/mach-visws/setup.c b/arch/i386/mach-visws/setup.c
index 26ada6fc0d77..07fac7e749c7 100644
--- a/arch/i386/mach-visws/setup.c
+++ b/arch/i386/mach-visws/setup.c
@@ -5,7 +5,6 @@
 
 #include <linux/smp.h>
 #include <linux/init.h>
-#include <linux/irq.h>
 #include <linux/interrupt.h>
 
 #include <asm/fixmap.h>
diff --git a/arch/i386/mach-visws/visws_apic.c b/arch/i386/mach-visws/visws_apic.c
index 04e6585849a2..3e64fb721291 100644
--- a/arch/i386/mach-visws/visws_apic.c
+++ b/arch/i386/mach-visws/visws_apic.c
@@ -19,7 +19,6 @@
 #include <linux/config.h>
 #include <linux/kernel_stat.h>
 #include <linux/interrupt.h>
-#include <linux/irq.h>
 #include <linux/smp_lock.h>
 #include <linux/init.h>
 
diff --git a/arch/i386/mach-voyager/setup.c b/arch/i386/mach-voyager/setup.c
index df123fc487bb..7d8a3acb9441 100644
--- a/arch/i386/mach-voyager/setup.c
+++ b/arch/i386/mach-voyager/setup.c
@@ -4,7 +4,6 @@
 
 #include <linux/config.h>
 #include <linux/init.h>
-#include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <asm/acpi.h>
 #include <asm/arch_hooks.h>
diff --git a/arch/i386/mach-voyager/voyager_basic.c b/arch/i386/mach-voyager/voyager_basic.c
index cc69875d979b..aa49a33a572c 100644
--- a/arch/i386/mach-voyager/voyager_basic.c
+++ b/arch/i386/mach-voyager/voyager_basic.c
@@ -27,7 +27,6 @@
 #include <asm/voyager.h>
 #include <asm/vic.h>
 #include <linux/pm.h>
-#include <linux/irq.h>
 #include <asm/tlbflush.h>
 #include <asm/arch_hooks.h>
 #include <asm/i8253.h>
diff --git a/arch/i386/mach-voyager/voyager_smp.c b/arch/i386/mach-voyager/voyager_smp.c
index 46b0cf4a31e0..72a1b9cae2e4 100644
--- a/arch/i386/mach-voyager/voyager_smp.c
+++ b/arch/i386/mach-voyager/voyager_smp.c
@@ -30,8 +30,6 @@
 #include <asm/tlbflush.h>
 #include <asm/arch_hooks.h>
 
-#include <linux/irq.h>
-
 /* TLB state -- visible externally, indexed physically */
 DEFINE_PER_CPU(struct tlb_state, cpu_tlbstate) ____cacheline_aligned = { &init_mm, 0 };
 
diff --git a/arch/i386/mach-voyager/voyager_thread.c b/arch/i386/mach-voyager/voyager_thread.c
index a9341b0eebff..2b03884fdb2a 100644
--- a/arch/i386/mach-voyager/voyager_thread.c
+++ b/arch/i386/mach-voyager/voyager_thread.c
@@ -31,8 +31,6 @@
 #include <asm/mtrr.h>
 #include <asm/msr.h>
 
-#include <linux/irq.h>
-
 #define THREAD_NAME "kvoyagerd"
 
 /* external variables */
diff --git a/arch/i386/mm/discontig.c b/arch/i386/mm/discontig.c
index 244d8ec66be2..c4af9638dbfa 100644
--- a/arch/i386/mm/discontig.c
+++ b/arch/i386/mm/discontig.c
@@ -98,7 +98,7 @@ unsigned long node_memmap_size_bytes(int nid, unsigned long start_pfn,
 
 extern unsigned long find_max_low_pfn(void);
 extern void find_max_pfn(void);
-extern void one_highpage_init(struct page *, int, int);
+extern void add_one_highpage_init(struct page *, int, int);
 
 extern struct e820map e820;
 extern unsigned long init_pg_tables_end;
@@ -427,7 +427,7 @@ void __init set_highmem_pages_init(int bad_ppro)
 			if (!pfn_valid(node_pfn))
 				continue;
 			page = pfn_to_page(node_pfn);
-			one_highpage_init(page, node_pfn, bad_ppro);
+			add_one_highpage_init(page, node_pfn, bad_ppro);
 		}
 	}
 	totalram_pages += totalhigh_pages;
diff --git a/arch/i386/mm/fault.c b/arch/i386/mm/fault.c
index 9edd4485b91e..cf572d9a3b6e 100644
--- a/arch/i386/mm/fault.c
+++ b/arch/i386/mm/fault.c
@@ -108,7 +108,7 @@ static inline unsigned long get_segment_eip(struct pt_regs *regs,
 		desc = (void *)desc + (seg & ~7);
 	} else {
 		/* Must disable preemption while reading the GDT. */
-		desc = (u32 *)&per_cpu(cpu_gdt_table, get_cpu());
+ 		desc = (u32 *)get_cpu_gdt_table(get_cpu());
 		desc = (void *)desc + (seg & ~7);
 	}
 
diff --git a/arch/i386/mm/init.c b/arch/i386/mm/init.c
index 2ebaf75f732e..06e26f006238 100644
--- a/arch/i386/mm/init.c
+++ b/arch/i386/mm/init.c
@@ -27,6 +27,8 @@
 #include <linux/slab.h>
 #include <linux/proc_fs.h>
 #include <linux/efi.h>
+#include <linux/memory_hotplug.h>
+#include <linux/initrd.h>
 
 #include <asm/processor.h>
 #include <asm/system.h>
@@ -266,17 +268,46 @@ static void __init permanent_kmaps_init(pgd_t *pgd_base)
 	pkmap_page_table = pte;	
 }
 
-void __init one_highpage_init(struct page *page, int pfn, int bad_ppro)
+static void __devinit free_new_highpage(struct page *page)
+{
+	set_page_count(page, 1);
+	__free_page(page);
+	totalhigh_pages++;
+}
+
+void __init add_one_highpage_init(struct page *page, int pfn, int bad_ppro)
 {
 	if (page_is_ram(pfn) && !(bad_ppro && page_kills_ppro(pfn))) {
 		ClearPageReserved(page);
-		set_page_count(page, 1);
-		__free_page(page);
-		totalhigh_pages++;
+		free_new_highpage(page);
 	} else
 		SetPageReserved(page);
 }
 
+static int add_one_highpage_hotplug(struct page *page, unsigned long pfn)
+{
+	free_new_highpage(page);
+	totalram_pages++;
+#ifdef CONFIG_FLATMEM
+	max_mapnr = max(pfn, max_mapnr);
+#endif
+	num_physpages++;
+	return 0;
+}
+
+/*
+ * Not currently handling the NUMA case.
+ * Assuming single node and all memory that
+ * has been added dynamically that would be
+ * onlined here is in HIGHMEM
+ */
+void online_page(struct page *page)
+{
+	ClearPageReserved(page);
+	add_one_highpage_hotplug(page, page_to_pfn(page));
+}
+
+
 #ifdef CONFIG_NUMA
 extern void set_highmem_pages_init(int);
 #else
@@ -284,7 +315,7 @@ static void __init set_highmem_pages_init(int bad_ppro)
 {
 	int pfn;
 	for (pfn = highstart_pfn; pfn < highend_pfn; pfn++)
-		one_highpage_init(pfn_to_page(pfn), pfn, bad_ppro);
+		add_one_highpage_init(pfn_to_page(pfn), pfn, bad_ppro);
 	totalram_pages += totalhigh_pages;
 }
 #endif /* CONFIG_FLATMEM */
@@ -615,6 +646,28 @@ void __init mem_init(void)
 #endif
 }
 
+/*
+ * this is for the non-NUMA, single node SMP system case.
+ * Specifically, in the case of x86, we will always add
+ * memory to the highmem for now.
+ */
+#ifndef CONFIG_NEED_MULTIPLE_NODES
+int add_memory(u64 start, u64 size)
+{
+	struct pglist_data *pgdata = &contig_page_data;
+	struct zone *zone = pgdata->node_zones + MAX_NR_ZONES-1;
+	unsigned long start_pfn = start >> PAGE_SHIFT;
+	unsigned long nr_pages = size >> PAGE_SHIFT;
+
+	return __add_pages(zone, start_pfn, nr_pages);
+}
+
+int remove_memory(u64 start, u64 size)
+{
+	return -EINVAL;
+}
+#endif
+
 kmem_cache_t *pgd_cache;
 kmem_cache_t *pmd_cache;
 
diff --git a/arch/i386/mm/ioremap.c b/arch/i386/mm/ioremap.c
index f379b8d67558..5d09de8d1c6b 100644
--- a/arch/i386/mm/ioremap.c
+++ b/arch/i386/mm/ioremap.c
@@ -28,7 +28,7 @@ static int ioremap_pte_range(pmd_t *pmd, unsigned long addr,
 	unsigned long pfn;
 
 	pfn = phys_addr >> PAGE_SHIFT;
-	pte = pte_alloc_kernel(&init_mm, pmd, addr);
+	pte = pte_alloc_kernel(pmd, addr);
 	if (!pte)
 		return -ENOMEM;
 	do {
@@ -87,14 +87,12 @@ static int ioremap_page_range(unsigned long addr,
 	flush_cache_all();
 	phys_addr -= addr;
 	pgd = pgd_offset_k(addr);
-	spin_lock(&init_mm.page_table_lock);
 	do {
 		next = pgd_addr_end(addr, end);
 		err = ioremap_pud_range(pgd, addr, next, phys_addr+addr, flags);
 		if (err)
 			break;
 	} while (pgd++, addr = next, addr != end);
-	spin_unlock(&init_mm.page_table_lock);
 	flush_tlb_all();
 	return err;
 }
diff --git a/arch/i386/mm/pgtable.c b/arch/i386/mm/pgtable.c
index dcdce2c6c532..9db3242103be 100644
--- a/arch/i386/mm/pgtable.c
+++ b/arch/i386/mm/pgtable.c
@@ -31,11 +31,13 @@ void show_mem(void)
 	pg_data_t *pgdat;
 	unsigned long i;
 	struct page_state ps;
+	unsigned long flags;
 
 	printk(KERN_INFO "Mem-info:\n");
 	show_free_areas();
 	printk(KERN_INFO "Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
 	for_each_pgdat(pgdat) {
+		pgdat_resize_lock(pgdat, &flags);
 		for (i = 0; i < pgdat->node_spanned_pages; ++i) {
 			page = pgdat_page_nr(pgdat, i);
 			total++;
@@ -48,6 +50,7 @@ void show_mem(void)
 			else if (page_count(page))
 				shared += page_count(page) - 1;
 		}
+		pgdat_resize_unlock(pgdat, &flags);
 	}
 	printk(KERN_INFO "%d pages of RAM\n", total);
 	printk(KERN_INFO "%d pages of HIGHMEM\n", highmem);
@@ -188,19 +191,19 @@ static inline void pgd_list_add(pgd_t *pgd)
 	struct page *page = virt_to_page(pgd);
 	page->index = (unsigned long)pgd_list;
 	if (pgd_list)
-		pgd_list->private = (unsigned long)&page->index;
+		set_page_private(pgd_list, (unsigned long)&page->index);
 	pgd_list = page;
-	page->private = (unsigned long)&pgd_list;
+	set_page_private(page, (unsigned long)&pgd_list);
 }
 
 static inline void pgd_list_del(pgd_t *pgd)
 {
 	struct page *next, **pprev, *page = virt_to_page(pgd);
 	next = (struct page *)page->index;
-	pprev = (struct page **)page->private;
+	pprev = (struct page **)page_private(page);
 	*pprev = next;
 	if (next)
-		next->private = (unsigned long)pprev;
+		set_page_private(next, (unsigned long)pprev);
 }
 
 void pgd_ctor(void *pgd, kmem_cache_t *cache, unsigned long unused)
diff --git a/arch/i386/oprofile/Kconfig b/arch/i386/oprofile/Kconfig
index 5ade19801b97..d8a84088471a 100644
--- a/arch/i386/oprofile/Kconfig
+++ b/arch/i386/oprofile/Kconfig
@@ -1,7 +1,3 @@
-
-menu "Profiling support"
-	depends on EXPERIMENTAL
-
 config PROFILING
 	bool "Profiling support (EXPERIMENTAL)"
 	help
@@ -19,5 +15,3 @@ config OPROFILE
 
 	  If unsure, say N.
 
-endmenu
-
diff --git a/arch/i386/oprofile/backtrace.c b/arch/i386/oprofile/backtrace.c
index 65dfd2edb671..21654be3f73f 100644
--- a/arch/i386/oprofile/backtrace.c
+++ b/arch/i386/oprofile/backtrace.c
@@ -12,6 +12,7 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <asm/ptrace.h>
+#include <asm/uaccess.h>
 
 struct frame_head {
 	struct frame_head * ebp;
@@ -21,26 +22,22 @@ struct frame_head {
 static struct frame_head *
 dump_backtrace(struct frame_head * head)
 {
-	oprofile_add_trace(head->ret);
+	struct frame_head bufhead[2];
 
-	/* frame pointers should strictly progress back up the stack
-	 * (towards higher addresses) */
-	if (head >= head->ebp)
+	/* Also check accessibility of one struct frame_head beyond */
+	if (!access_ok(VERIFY_READ, head, sizeof(bufhead)))
+		return NULL;
+	if (__copy_from_user_inatomic(bufhead, head, sizeof(bufhead)))
 		return NULL;
 
-	return head->ebp;
-}
-
-/* check that the page(s) containing the frame head are present */
-static int pages_present(struct frame_head * head)
-{
-	struct mm_struct * mm = current->mm;
+	oprofile_add_trace(bufhead[0].ret);
 
-	/* FIXME: only necessary once per page */
-	if (!check_user_page_readable(mm, (unsigned long)head))
-		return 0;
+	/* frame pointers should strictly progress back up the stack
+	 * (towards higher addresses) */
+	if (head >= bufhead[0].ebp)
+		return NULL;
 
-	return check_user_page_readable(mm, (unsigned long)(head + 1));
+	return bufhead[0].ebp;
 }
 
 /*
@@ -97,15 +94,6 @@ x86_backtrace(struct pt_regs * const regs, unsigned int depth)
 		return;
 	}
 
-#ifdef CONFIG_SMP
-	if (!spin_trylock(&current->mm->page_table_lock))
-		return;
-#endif
-
-	while (depth-- && head && pages_present(head))
+	while (depth-- && head)
 		head = dump_backtrace(head);
-
-#ifdef CONFIG_SMP
-	spin_unlock(&current->mm->page_table_lock);
-#endif
 }
diff --git a/arch/i386/oprofile/nmi_timer_int.c b/arch/i386/oprofile/nmi_timer_int.c
index ad93cdd55d63..930a1127bb30 100644
--- a/arch/i386/oprofile/nmi_timer_int.c
+++ b/arch/i386/oprofile/nmi_timer_int.c
@@ -9,7 +9,7 @@
 
 #include <linux/init.h>
 #include <linux/smp.h>
-#include <linux/irq.h>
+#include <linux/errno.h>
 #include <linux/oprofile.h>
 #include <linux/rcupdate.h>
 
diff --git a/arch/i386/pci/acpi.c b/arch/i386/pci/acpi.c
index 2941674f35eb..4c4522b43be5 100644
--- a/arch/i386/pci/acpi.c
+++ b/arch/i386/pci/acpi.c
@@ -2,7 +2,6 @@
 #include <linux/acpi.h>
 #include <linux/init.h>
 #include <linux/irq.h>
-#include <asm/hw_irq.h>
 #include <asm/numa.h>
 #include "pci.h"
 
diff --git a/arch/i386/pci/common.c b/arch/i386/pci/common.c
index c96bea14b98f..f6bc48da4d2a 100644
--- a/arch/i386/pci/common.c
+++ b/arch/i386/pci/common.c
@@ -132,7 +132,7 @@ struct pci_bus * __devinit pcibios_scan_root(int busnum)
 		}
 	}
 
-	printk("PCI: Probing PCI hardware (bus %02x)\n", busnum);
+	printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busnum);
 
 	return pci_scan_bus_parented(NULL, busnum, &pci_root_ops, NULL);
 }
@@ -144,7 +144,7 @@ static int __init pcibios_init(void)
 	struct cpuinfo_x86 *c = &boot_cpu_data;
 
 	if (!raw_pci_ops) {
-		printk("PCI: System does not support PCI\n");
+		printk(KERN_WARNING "PCI: System does not support PCI\n");
 		return 0;
 	}
 
diff --git a/arch/i386/pci/direct.c b/arch/i386/pci/direct.c
index 30b7e9b4f6a2..94331d6be7a3 100644
--- a/arch/i386/pci/direct.c
+++ b/arch/i386/pci/direct.c
@@ -201,7 +201,7 @@ static int __init pci_sanity_check(struct pci_raw_ops *o)
 			return 1;
 	}
 
-	DBG("PCI: Sanity check failed\n");
+	DBG(KERN_WARNING "PCI: Sanity check failed\n");
 	return 0;
 }
 
diff --git a/arch/i386/pci/fixup.c b/arch/i386/pci/fixup.c
index 8e8e895e1b5a..eeb1b1f2d548 100644
--- a/arch/i386/pci/fixup.c
+++ b/arch/i386/pci/fixup.c
@@ -2,6 +2,8 @@
  * Exceptions for specific devices. Usually work-arounds for fatal design flaws.
  */
 
+#include <linux/delay.h>
+#include <linux/dmi.h>
 #include <linux/pci.h>
 #include <linux/init.h>
 #include "pci.h"
@@ -384,3 +386,59 @@ static void __devinit pci_fixup_video(struct pci_dev *pdev)
 	}
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video);
+
+/*
+ * Some Toshiba laptops need extra code to enable their TI TSB43AB22/A.
+ *
+ * We pretend to bring them out of full D3 state, and restore the proper
+ * IRQ, PCI cache line size, and BARs, otherwise the device won't function
+ * properly.  In some cases, the device will generate an interrupt on
+ * the wrong IRQ line, causing any devices sharing the the line it's
+ * *supposed* to use to be disabled by the kernel's IRQ debug code.
+ */
+static u16 toshiba_line_size;
+
+static struct dmi_system_id __devinitdata toshiba_ohci1394_dmi_table[] = {
+	{
+		.ident = "Toshiba PS5 based laptop",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "PS5"),
+		},
+	},
+	{
+		.ident = "Toshiba PSM4 based laptop",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "PSM4"),
+		},
+	},
+	{ }
+};
+
+static void __devinit pci_pre_fixup_toshiba_ohci1394(struct pci_dev *dev)
+{
+	if (!dmi_check_system(toshiba_ohci1394_dmi_table))
+		return; /* only applies to certain Toshibas (so far) */
+
+	dev->current_state = PCI_D3cold;
+	pci_read_config_word(dev, PCI_CACHE_LINE_SIZE, &toshiba_line_size);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, 0x8032,
+			 pci_pre_fixup_toshiba_ohci1394);
+
+static void __devinit pci_post_fixup_toshiba_ohci1394(struct pci_dev *dev)
+{
+	if (!dmi_check_system(toshiba_ohci1394_dmi_table))
+		return; /* only applies to certain Toshibas (so far) */
+
+	/* Restore config space on Toshiba laptops */
+	pci_write_config_word(dev, PCI_CACHE_LINE_SIZE, toshiba_line_size);
+	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, (u8 *)&dev->irq);
+	pci_write_config_dword(dev, PCI_BASE_ADDRESS_0,
+			       pci_resource_start(dev, 0));
+	pci_write_config_dword(dev, PCI_BASE_ADDRESS_1,
+			       pci_resource_start(dev, 1));
+}
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_TI, 0x8032,
+			 pci_post_fixup_toshiba_ohci1394);
diff --git a/arch/i386/pci/i386.c b/arch/i386/pci/i386.c
index 6d6338500c3c..ed2c8c899bd3 100644
--- a/arch/i386/pci/i386.c
+++ b/arch/i386/pci/i386.c
@@ -221,6 +221,11 @@ int pcibios_enable_resources(struct pci_dev *dev, int mask)
 			continue;
 
 		r = &dev->resource[idx];
+		if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
+			continue;
+		if ((idx == PCI_ROM_RESOURCE) &&
+				(!(r->flags & IORESOURCE_ROM_ENABLE)))
+			continue;
 		if (!r->start && r->end) {
 			printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev));
 			return -EINVAL;
@@ -230,8 +235,6 @@ int pcibios_enable_resources(struct pci_dev *dev, int mask)
 		if (r->flags & IORESOURCE_MEM)
 			cmd |= PCI_COMMAND_MEMORY;
 	}
-	if (dev->resource[PCI_ROM_RESOURCE].start)
-		cmd |= PCI_COMMAND_MEMORY;
 	if (cmd != old_cmd) {
 		printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd);
 		pci_write_config_word(dev, PCI_COMMAND, cmd);
diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c
index 326a2edc3834..19e6f4871d1e 100644
--- a/arch/i386/pci/irq.c
+++ b/arch/i386/pci/irq.c
@@ -11,12 +11,11 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
-#include <linux/irq.h>
 #include <linux/dmi.h>
 #include <asm/io.h>
 #include <asm/smp.h>
 #include <asm/io_apic.h>
-#include <asm/hw_irq.h>
+#include <linux/irq.h>
 #include <linux/acpi.h>
 
 #include "pci.h"
@@ -548,31 +547,48 @@ static __init int intel_router_probe(struct irq_router *r, struct pci_dev *route
 	return 0;
 }
 
-static __init int via_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+static __init int via_router_probe(struct irq_router *r,
+				struct pci_dev *router, u16 device)
 {
 	/* FIXME: We should move some of the quirk fixup stuff here */
 
-	if (router->device == PCI_DEVICE_ID_VIA_82C686 &&
-			device == PCI_DEVICE_ID_VIA_82C586_0) {
-		/* Asus k7m bios wrongly reports 82C686A as 586-compatible */
-		device = PCI_DEVICE_ID_VIA_82C686;
+	/*
+	 * work arounds for some buggy BIOSes
+	 */
+	if (device == PCI_DEVICE_ID_VIA_82C586_0) {
+		switch(router->device) {
+		case PCI_DEVICE_ID_VIA_82C686:
+			/*
+			 * Asus k7m bios wrongly reports 82C686A
+			 * as 586-compatible
+			 */
+			device = PCI_DEVICE_ID_VIA_82C686;
+			break;
+		case PCI_DEVICE_ID_VIA_8235:
+			/**
+			 * Asus a7v-x bios wrongly reports 8235
+			 * as 586-compatible
+			 */
+			device = PCI_DEVICE_ID_VIA_8235;
+			break;
+		}
 	}
 
-	switch(device)
-	{
-		case PCI_DEVICE_ID_VIA_82C586_0:
-			r->name = "VIA";
-			r->get = pirq_via586_get;
-			r->set = pirq_via586_set;
-			return 1;
-		case PCI_DEVICE_ID_VIA_82C596:
-		case PCI_DEVICE_ID_VIA_82C686:
-		case PCI_DEVICE_ID_VIA_8231:
+	switch(device) {
+	case PCI_DEVICE_ID_VIA_82C586_0:
+		r->name = "VIA";
+		r->get = pirq_via586_get;
+		r->set = pirq_via586_set;
+		return 1;
+	case PCI_DEVICE_ID_VIA_82C596:
+	case PCI_DEVICE_ID_VIA_82C686:
+	case PCI_DEVICE_ID_VIA_8231:
+	case PCI_DEVICE_ID_VIA_8235:
 		/* FIXME: add new ones for 8233/5 */
-			r->name = "VIA";
-			r->get = pirq_via_get;
-			r->set = pirq_via_set;
-			return 1;
+		r->name = "VIA";
+		r->get = pirq_via_get;
+		r->set = pirq_via_set;
+		return 1;
 	}
 	return 0;
 }
diff --git a/arch/i386/power/cpu.c b/arch/i386/power/cpu.c
index 7b0b9ad848e5..50a0bef8c85f 100644
--- a/arch/i386/power/cpu.c
+++ b/arch/i386/power/cpu.c
@@ -8,25 +8,8 @@
  */
 
 #include <linux/config.h>
-#include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/spinlock.h>
-#include <linux/poll.h>
-#include <linux/delay.h>
-#include <linux/sysrq.h>
-#include <linux/proc_fs.h>
-#include <linux/irq.h>
-#include <linux/pm.h>
-#include <linux/device.h>
 #include <linux/suspend.h>
-#include <linux/acpi.h>
-
-#include <asm/uaccess.h>
-#include <asm/acpi.h>
-#include <asm/tlbflush.h>
-#include <asm/processor.h>
 
 static struct saved_context saved_context;
 
@@ -68,16 +51,14 @@ void save_processor_state(void)
 	__save_processor_state(&saved_context);
 }
 
-static void
-do_fpu_end(void)
+static void do_fpu_end(void)
 {
-        /* restore FPU regs if necessary */
-	/* Do it out of line so that gcc does not move cr0 load to some stupid place */
-        kernel_fpu_end();
-	mxcsr_feature_mask_init();
+	/*
+	 * Restore FPU regs if necessary.
+	 */
+	kernel_fpu_end();
 }
 
-
 static void fix_processor_context(void)
 {
 	int cpu = smp_processor_id();
@@ -137,6 +118,7 @@ void __restore_processor_state(struct saved_context *ctxt)
 	fix_processor_context();
 	do_fpu_end();
 	mtrr_ap_init();
+	mcheck_init(&boot_cpu_data);
 }
 
 void restore_processor_state(void)
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 945c15a0722b..b76ce1fe2e7f 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -26,6 +26,10 @@ config MMU
 	bool
 	default y
 
+config SWIOTLB
+       bool
+       default y
+
 config RWSEM_XCHGADD_ALGORITHM
 	bool
 	default y
@@ -54,6 +58,10 @@ config IA64_UNCACHED_ALLOCATOR
 	bool
 	select GENERIC_ALLOCATOR
 
+config ZONE_DMA_IS_DMA32
+	bool
+	default y
+
 choice
 	prompt "System type"
 	default IA64_GENERIC
@@ -63,8 +71,6 @@ config IA64_GENERIC
 	select ACPI
 	select NUMA
 	select ACPI_NUMA
-	select VIRTUAL_MEM_MAP
-	select DISCONTIGMEM
 	help
 	  This selects the system type of your hardware.  A "generic" kernel
 	  will run on any supported IA-64 system.  However, if you configure
@@ -162,6 +168,19 @@ config IA64_PAGE_SIZE_64KB
 
 endchoice
 
+choice
+	prompt "Page Table Levels"
+	default PGTABLE_3
+
+config PGTABLE_3
+	bool "3 Levels"
+
+config PGTABLE_4
+	depends on !IA64_PAGE_SIZE_64KB
+	bool "4 Levels"
+
+endchoice
+
 source kernel/Kconfig.hz
 
 config IA64_BRL_EMU
@@ -176,40 +195,6 @@ config IA64_L1_CACHE_SHIFT
 	default "6" if ITANIUM
 
 # align cache-sensitive data to 64 bytes
-config NUMA
-	bool "NUMA support"
-	depends on !IA64_HP_SIM
-	default y if IA64_SGI_SN2
-	select ACPI_NUMA
-	help
-	  Say Y to compile the kernel to support NUMA (Non-Uniform Memory
-	  Access).  This option is for configuring high-end multiprocessor
-	  server systems.  If in doubt, say N.
-
-config VIRTUAL_MEM_MAP
-	bool "Virtual mem map"
-	default y if !IA64_HP_SIM
-	help
-	  Say Y to compile the kernel with support for a virtual mem map.
-	  This code also only takes effect if a memory hole of greater than
-	  1 Gb is found during boot.  You must turn this option on if you
-	  require the DISCONTIGMEM option for your machine. If you are
-	  unsure, say Y.
-
-config HOLES_IN_ZONE
-	bool
-	default y if VIRTUAL_MEM_MAP
-
-config ARCH_DISCONTIGMEM_ENABLE
-	bool "Discontiguous memory support"
-	depends on (IA64_DIG || IA64_SGI_SN2 || IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB) && NUMA && VIRTUAL_MEM_MAP
-	default y if (IA64_SGI_SN2 || IA64_GENERIC) && NUMA
-	help
-	  Say Y to support efficient handling of discontiguous physical memory,
-	  for architectures which are either NUMA (Non-Uniform Memory Access)
-	  or have huge holes in the physical address space for other reasons.
-	  See <file:Documentation/vm/numa> for more.
-
 config IA64_CYCLONE
 	bool "Cyclone (EXA) Time Source support"
 	help
@@ -223,6 +208,7 @@ config IOSAPIC
 
 config IA64_SGI_SN_XP
 	tristate "Support communication between SGI SSIs"
+	depends on IA64_GENERIC || IA64_SGI_SN2
 	select IA64_UNCACHED_ALLOCATOR
 	help
 	  An SGI machine can be divided into multiple Single System
@@ -232,8 +218,10 @@ config IA64_SGI_SN_XP
 	  based on a network adapter and DMA messaging.
 
 config FORCE_MAX_ZONEORDER
-	int
-	default "18"
+	int "MAX_ORDER (11 - 17)"  if !HUGETLB_PAGE
+	range 11 17  if !HUGETLB_PAGE
+	default "17" if HUGETLB_PAGE
+	default "11"
 
 config SMP
 	bool "Symmetric multi-processing support"
@@ -254,8 +242,8 @@ config SMP
 	  If you don't know what to do here, say N.
 
 config NR_CPUS
-	int "Maximum number of CPUs (2-512)"
-	range 2 512
+	int "Maximum number of CPUs (2-1024)"
+	range 2 1024
 	depends on SMP
 	default "64"
 	help
@@ -298,6 +286,58 @@ config PREEMPT
 
 source "mm/Kconfig"
 
+config ARCH_SELECT_MEMORY_MODEL
+	def_bool y
+
+config ARCH_DISCONTIGMEM_ENABLE
+	def_bool y
+	help
+	  Say Y to support efficient handling of discontiguous physical memory,
+	  for architectures which are either NUMA (Non-Uniform Memory Access)
+	  or have huge holes in the physical address space for other reasons.
+ 	  See <file:Documentation/vm/numa> for more.
+
+config ARCH_FLATMEM_ENABLE
+	def_bool y
+
+config ARCH_SPARSEMEM_ENABLE
+	def_bool y
+	depends on ARCH_DISCONTIGMEM_ENABLE
+
+config ARCH_DISCONTIGMEM_DEFAULT
+	def_bool y if (IA64_SGI_SN2 || IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB)
+	depends on ARCH_DISCONTIGMEM_ENABLE
+
+config NUMA
+	bool "NUMA support"
+	depends on !IA64_HP_SIM && !FLATMEM
+	default y if IA64_SGI_SN2
+	help
+	  Say Y to compile the kernel to support NUMA (Non-Uniform Memory
+	  Access).  This option is for configuring high-end multiprocessor
+	  server systems.  If in doubt, say N.
+
+# VIRTUAL_MEM_MAP and FLAT_NODE_MEM_MAP are functionally equivalent.
+# VIRTUAL_MEM_MAP has been retained for historical reasons.
+config VIRTUAL_MEM_MAP
+	bool "Virtual mem map"
+	depends on !SPARSEMEM
+	default y if !IA64_HP_SIM
+	help
+	  Say Y to compile the kernel with support for a virtual mem map.
+	  This code also only takes effect if a memory hole of greater than
+	  1 Gb is found during boot.  You must turn this option on if you
+	  require the DISCONTIGMEM option for your machine. If you are
+	  unsure, say Y.
+
+config HOLES_IN_ZONE
+	bool
+	default y if VIRTUAL_MEM_MAP
+
+config HAVE_ARCH_EARLY_PFN_TO_NID
+	def_bool y
+	depends on NEED_MULTIPLE_NODES
+
 config IA32_SUPPORT
 	bool "Support for Linux/x86 binaries"
 	help
@@ -404,8 +444,21 @@ config GENERIC_PENDING_IRQ
 
 source "arch/ia64/hp/sim/Kconfig"
 
+menu "Instrumentation Support"
+        depends on EXPERIMENTAL
+
 source "arch/ia64/oprofile/Kconfig"
 
+config KPROBES
+	bool "Kprobes (EXPERIMENTAL)"
+	help
+	  Kprobes allows you to trap at almost any kernel address and
+	  execute a callback function.  register_kprobe() establishes
+	  a probepoint and specifies the callback.  Kprobes is useful
+	  for kernel debugging, non-intrusive instrumentation and testing.
+	  If in doubt, say "N".
+endmenu
+
 source "arch/ia64/Kconfig.debug"
 
 source "security/Kconfig"
diff --git a/arch/ia64/Kconfig.debug b/arch/ia64/Kconfig.debug
index fda67ac993d7..de9d507ba0fd 100644
--- a/arch/ia64/Kconfig.debug
+++ b/arch/ia64/Kconfig.debug
@@ -2,17 +2,6 @@ menu "Kernel hacking"
 
 source "lib/Kconfig.debug"
 
-config KPROBES
-        bool "Kprobes"
-        depends on DEBUG_KERNEL
-        help
-          Kprobes allows you to trap at almost any kernel address and
-          execute a callback function.  register_kprobe() establishes
-          a probepoint and specifies the callback.  Kprobes is useful
-          for kernel debugging, non-intrusive instrumentation and testing.
-          If in doubt, say "N".
-
-
 choice
 	prompt "Physical memory granularity"
 	default IA64_GRANULE_64MB
diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig
index 3b65cbb31b1d..b40672bb3ab0 100644
--- a/arch/ia64/configs/bigsur_defconfig
+++ b/arch/ia64/configs/bigsur_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-rc2
-# Mon Nov 29 13:27:48 2004
+# Linux kernel version: 2.6.14-rc1
+# Wed Sep 14 15:18:49 2005
 #
 
 #
@@ -10,34 +10,40 @@
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -58,12 +64,15 @@ CONFIG_IA64=y
 CONFIG_64BIT=y
 CONFIG_MMU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_TIME_INTERPOLATION=y
 CONFIG_EFI=y
 CONFIG_GENERIC_IOMAP=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 # CONFIG_IA64_GENERIC is not set
 CONFIG_IA64_DIG=y
 # CONFIG_IA64_HP_ZX1 is not set
+# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
 # CONFIG_IA64_SGI_SN2 is not set
 # CONFIG_IA64_HP_SIM is not set
 CONFIG_ITANIUM=y
@@ -72,17 +81,30 @@ CONFIG_ITANIUM=y
 # CONFIG_IA64_PAGE_SIZE_8KB is not set
 CONFIG_IA64_PAGE_SIZE_16KB=y
 # CONFIG_IA64_PAGE_SIZE_64KB is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
 CONFIG_IA64_BRL_EMU=y
 CONFIG_IA64_L1_CACHE_SHIFT=6
 # CONFIG_NUMA is not set
 # CONFIG_VIRTUAL_MEM_MAP is not set
 # CONFIG_IA64_CYCLONE is not set
 CONFIG_IOSAPIC=y
+# CONFIG_IA64_SGI_SN_XP is not set
 CONFIG_FORCE_MAX_ZONEORDER=18
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 # CONFIG_HOTPLUG_CPU is not set
+# CONFIG_SCHED_SMT is not set
 CONFIG_PREEMPT=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_HAVE_DEC_LOCK=y
 CONFIG_IA32_SUPPORT=y
 CONFIG_COMPAT=y
@@ -95,6 +117,7 @@ CONFIG_IA64_PALINFO=y
 #
 CONFIG_EFI_VARS=y
 CONFIG_EFI_PCDP=y
+# CONFIG_DELL_RBU is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 
@@ -102,18 +125,26 @@ CONFIG_BINFMT_MISC=m
 # Power management and ACPI
 #
 CONFIG_PM=y
-CONFIG_ACPI=y
+# CONFIG_PM_DEBUG is not set
 
 #
 # ACPI (Advanced Configuration and Power Interface) Support
 #
+CONFIG_ACPI=y
 CONFIG_ACPI_BUTTON=m
 CONFIG_ACPI_FAN=m
 CONFIG_ACPI_PROCESSOR=m
 CONFIG_ACPI_THERMAL=m
+CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
+# CONFIG_ACPI_CONTAINER is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
 
 #
 # Bus options (PCI, PCMCIA)
@@ -122,7 +153,7 @@ CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 
 #
 # PCI Hotplug Support
@@ -135,8 +166,70 @@ CONFIG_PCI_NAMES=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
 #
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -151,6 +244,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -163,7 +261,13 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Plug and Play support
 #
-# CONFIG_PNP is not set
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
 
 #
 # Block devices
@@ -172,14 +276,15 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=m
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
 
 #
@@ -189,6 +294,7 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -211,7 +317,8 @@ CONFIG_BLK_DEV_IDEFLOPPY=m
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=m
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
 CONFIG_BLK_DEV_IDEPCI=y
 CONFIG_IDEPCI_SHARE_IRQ=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
@@ -233,6 +340,7 @@ CONFIG_IDEDMA_PCI_AUTO=y
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 CONFIG_BLK_DEV_PIIX=m
+# CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
 # CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -250,6 +358,7 @@ CONFIG_IDEDMA_AUTO=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -261,6 +370,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_CHR_DEV_OSST is not set
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -274,6 +384,8 @@ CONFIG_SCSI_LOGGING=y
 #
 CONFIG_SCSI_SPI_ATTRS=m
 # CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
@@ -288,18 +400,13 @@ CONFIG_SCSI_SPI_ATTRS=m
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 CONFIG_SCSI_QLOGIC_1280=y
 # CONFIG_SCSI_QLOGIC_1280_1040 is not set
@@ -309,7 +416,8 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_SCSI_QLA2300 is not set
 # CONFIG_SCSI_QLA2322 is not set
 # CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -332,11 +440,14 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
+# CONFIG_DM_MULTIPATH is not set
 
 #
 # Fusion MPT device support
 #
 # CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -349,72 +460,14 @@ CONFIG_DM_ZERO=m
 # CONFIG_I2O is not set
 
 #
-# Networking support
+# Network device support
 #
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_NET_SB1000 is not set
 
 #
 # ARCnet devices
@@ -422,6 +475,11 @@ CONFIG_DUMMY=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -443,7 +501,6 @@ CONFIG_NET_PCI=y
 # CONFIG_FORCEDETH is not set
 # CONFIG_DGRS is not set
 CONFIG_EEPRO100=y
-# CONFIG_EEPRO100_PIO is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -465,13 +522,17 @@ CONFIG_EEPRO100=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -496,6 +557,8 @@ CONFIG_EEPRO100=y
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -525,18 +588,6 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
@@ -554,6 +605,17 @@ CONFIG_MOUSE_PS2=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -571,7 +633,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
 # CONFIG_SERIAL_8250_RSA is not set
 
 #
@@ -579,6 +640,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -603,14 +665,22 @@ CONFIG_EFI_RTC=y
 #
 CONFIG_AGP=m
 CONFIG_AGP_I460=m
-CONFIG_DRM=y
+CONFIG_DRM=m
 # CONFIG_DRM_TDFX is not set
 CONFIG_DRM_R128=m
 # CONFIG_DRM_RADEON is not set
 # CONFIG_DRM_MGA is not set
 # CONFIG_DRM_SIS is not set
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_HPET is not set
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
 
 #
 # I2C support
@@ -635,7 +705,7 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
-# CONFIG_I2C_ISA is not set
+# CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
@@ -651,16 +721,43 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_PCA_ISA is not set
 
 #
-# Hardware Sensors Chip support
+# Miscellaneous I2C Chip support
 #
-# CONFIG_I2C_SENSOR is not set
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
 # CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
 # CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
 # CONFIG_SENSORS_LM75 is not set
@@ -671,33 +768,26 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_SENSORS_LM85 is not set
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
+# Misc devices
 #
-# CONFIG_W1 is not set
 
 #
-# Misc devices
+# Multimedia Capabilities Port drivers
 #
 
 #
@@ -752,11 +842,12 @@ CONFIG_SND_OPL3_LIB=m
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
 
 #
 # PCI devices
 #
-CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_ALI5451 is not set
 # CONFIG_SND_ATIIXP is not set
 # CONFIG_SND_ATIIXP_MODEM is not set
@@ -768,6 +859,8 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_CS46XX is not set
 CONFIG_SND_CS4281=m
 # CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
 # CONFIG_SND_KORG1212 is not set
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
@@ -775,9 +868,10 @@ CONFIG_SND_CS4281=m
 # CONFIG_SND_RME96 is not set
 # CONFIG_SND_RME9652 is not set
 # CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
 # CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_AD1889 is not set
 # CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_ENS1370 is not set
 # CONFIG_SND_ENS1371 is not set
@@ -791,13 +885,14 @@ CONFIG_SND_CS4281=m
 # CONFIG_SND_INTEL8X0M is not set
 # CONFIG_SND_SONICVIBES is not set
 # CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
 # CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
 
 #
 # USB devices
 #
 # CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_USX2Y is not set
 
 #
 # Open Sound System
@@ -807,6 +902,8 @@ CONFIG_SND_CS4281=m
 #
 # USB support
 #
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
 
@@ -818,35 +915,38 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
 
 #
 # USB Host Controller Drivers
 #
 # CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 CONFIG_USB_UHCI_HCD=m
+# CONFIG_USB_SL811_HCD is not set
 
 #
 # USB Device Class drivers
 #
-CONFIG_USB_AUDIO=m
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
 CONFIG_USB_BLUETOOTH_TTY=m
-CONFIG_USB_MIDI=m
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_RW_DETECT is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_HP8200e is not set
+# CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 
 #
 # USB Input Devices
@@ -863,19 +963,23 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_MOUSE is not set
 # CONFIG_USB_AIPTEK is not set
 # CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
 # CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
 # CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
 
 #
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_HPUSBSCSI is not set
 
 #
 # USB Multimedia devices
@@ -894,6 +998,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -909,7 +1014,6 @@ CONFIG_USB_HIDDEV=y
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
-# CONFIG_USB_TIGL is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
@@ -918,10 +1022,12 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
 # CONFIG_USB_TEST is not set
 
 #
-# USB ATM/DSL drivers
+# USB DSL modem support
 #
 
 #
@@ -930,10 +1036,25 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_GADGET is not set
 
 #
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -945,17 +1066,20 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=y
-# CONFIG_XFS_RT is not set
+CONFIG_XFS_EXPORT=y
 CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_QUOTACTL=y
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -982,14 +1106,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1013,15 +1134,18 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
 CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
 CONFIG_RPCSEC_GSS_KRB5=m
@@ -1031,9 +1155,11 @@ CONFIG_CIFS=m
 CONFIG_CIFS_STATS=y
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1103,8 +1229,12 @@ CONFIG_NLS_UTF8=m
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
 
 #
 # Profiling support
@@ -1115,14 +1245,20 @@ CONFIG_OPROFILE=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_KPROBES is not set
 # CONFIG_IA64_GRANULE_16MB is not set
 CONFIG_IA64_GRANULE_64MB=y
 # CONFIG_IA64_PRINT_HAZARDS is not set
@@ -1149,6 +1285,7 @@ CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
@@ -1164,3 +1301,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig
new file mode 100644
index 000000000000..80f8663bc6d9
--- /dev/null
+++ b/arch/ia64/configs/gensparse_defconfig
@@ -0,0 +1,1319 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc2
+# Wed Sep 28 08:27:29 2005
+#
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+
+#
+# Processor type and features
+#
+CONFIG_IA64=y
+CONFIG_64BIT=y
+CONFIG_MMU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_INTERPOLATION=y
+CONFIG_EFI=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_IA64_GENERIC=y
+# CONFIG_IA64_DIG is not set
+# CONFIG_IA64_HP_ZX1 is not set
+# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
+# CONFIG_IA64_SGI_SN2 is not set
+# CONFIG_IA64_HP_SIM is not set
+# CONFIG_ITANIUM is not set
+CONFIG_MCKINLEY=y
+# CONFIG_IA64_PAGE_SIZE_4KB is not set
+# CONFIG_IA64_PAGE_SIZE_8KB is not set
+CONFIG_IA64_PAGE_SIZE_16KB=y
+# CONFIG_IA64_PAGE_SIZE_64KB is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_IA64_L1_CACHE_SHIFT=7
+CONFIG_IA64_CYCLONE=y
+CONFIG_IOSAPIC=y
+# CONFIG_IA64_SGI_SN_XP is not set
+CONFIG_FORCE_MAX_ZONEORDER=17
+CONFIG_SMP=y
+CONFIG_NR_CPUS=512
+CONFIG_HOTPLUG_CPU=y
+# CONFIG_SCHED_SMT is not set
+# CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_NEED_MULTIPLE_NODES=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_NUMA=y
+CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
+CONFIG_IA32_SUPPORT=y
+CONFIG_COMPAT=y
+CONFIG_IA64_MCA_RECOVERY=y
+CONFIG_PERFMON=y
+CONFIG_IA64_PALINFO=y
+
+#
+# Firmware Drivers
+#
+CONFIG_EFI_VARS=y
+CONFIG_EFI_PCDP=y
+# CONFIG_DELL_RBU is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management and ACPI
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+
+#
+# ACPI (Advanced Configuration and Power Interface) Support
+#
+CONFIG_ACPI=y
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_HOTPLUG_CPU=y
+CONFIG_ACPI_THERMAL=m
+CONFIG_ACPI_NUMA=y
+CONFIG_ACPI_BLACKLIST_YEAR=0
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_POWER=y
+CONFIG_ACPI_SYSTEM=y
+CONFIG_ACPI_CONTAINER=m
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Bus options (PCI, PCMCIA)
+#
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY_PROC=y
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCI Hotplug Support
+#
+CONFIG_HOTPLUG_PCI=m
+# CONFIG_HOTPLUG_PCI_FAKE is not set
+CONFIG_HOTPLUG_PCI_ACPI=m
+# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+# CONFIG_HOTPLUG_PCI_SGI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_IDEFLOPPY=y
+CONFIG_BLK_DEV_IDESCSI=m
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+CONFIG_BLK_DEV_CMD64X=y
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+CONFIG_BLK_DEV_SGIIOC4=y
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+CONFIG_SCSI_SATA=y
+# CONFIG_SCSI_SATA_AHCI is not set
+# CONFIG_SCSI_SATA_SVW is not set
+# CONFIG_SCSI_ATA_PIIX is not set
+# CONFIG_SCSI_SATA_MV is not set
+# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_SX4 is not set
+# CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIS is not set
+# CONFIG_SCSI_SATA_ULI is not set
+# CONFIG_SCSI_SATA_VIA is not set
+CONFIG_SCSI_SATA_VITESSE=y
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+CONFIG_SCSI_QLOGIC_1280=y
+# CONFIG_SCSI_QLOGIC_1280_1040 is not set
+CONFIG_SCSI_QLA2XXX=y
+CONFIG_SCSI_QLA21XX=m
+CONFIG_SCSI_QLA22XX=m
+CONFIG_SCSI_QLA2300=m
+CONFIG_SCSI_QLA2322=m
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID5=m
+CONFIG_MD_RAID6=m
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_MULTIPATH_EMC is not set
+
+#
+# Fusion MPT device support
+#
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION_FC=m
+CONFIG_FUSION_MAX_SGE=128
+# CONFIG_FUSION_CTL is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+CONFIG_NET_TULIP=y
+# CONFIG_DE2104X is not set
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+# CONFIG_TULIP_MMIO is not set
+# CONFIG_TULIP_NAPI is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+CONFIG_EEPRO100=m
+CONFIG_E100=m
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+# CONFIG_E1000_NAPI is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+CONFIG_NETCONSOLE=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+CONFIG_GAMEPORT=m
+# CONFIG_GAMEPORT_NS558 is not set
+# CONFIG_GAMEPORT_L4 is not set
+# CONFIG_GAMEPORT_EMU10K1 is not set
+# CONFIG_GAMEPORT_FM801 is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_STALDRV is not set
+CONFIG_SGI_SNSC=y
+CONFIG_SGI_TIOCX=y
+CONFIG_SGI_MBCS=m
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_ACPI=y
+CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_SGI_L1_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_SGI_IOC4=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_EFI_RTC=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+CONFIG_AGP=m
+CONFIG_AGP_I460=m
+CONFIG_AGP_HP_ZX1=m
+CONFIG_AGP_SGI_TIOCA=m
+CONFIG_DRM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
+CONFIG_RAW_DRIVER=m
+CONFIG_HPET=y
+# CONFIG_HPET_RTC_IRQ is not set
+CONFIG_HPET_MMAP=y
+CONFIG_MAX_RAW_DEVS=256
+# CONFIG_HANGCHECK_TIMER is not set
+CONFIG_MMTIMER=y
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_GENERIC_DRIVER=y
+
+#
+# Generic devices
+#
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_DUMMY=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
+
+#
+# PCI devices
+#
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS4281=m
+CONFIG_SND_EMU10K1=m
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+CONFIG_SND_FM801=m
+# CONFIG_SND_FM801_TEA575X is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=m
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+CONFIG_INFINIBAND=m
+# CONFIG_INFINIBAND_USER_MAD is not set
+# CONFIG_INFINIBAND_USER_ACCESS is not set
+CONFIG_INFINIBAND_MTHCA=m
+# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+
+#
+# SN Devices
+#
+CONFIG_SGI_IOC4=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=y
+CONFIG_XFS_EXPORT=y
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFS_DIRECTIO=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
+
+#
+# HP Simulator drivers
+#
+# CONFIG_HP_SIMETH is not set
+# CONFIG_HP_SIMSERIAL is not set
+# CONFIG_HP_SIMSCSI is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=20
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_KPROBES is not set
+CONFIG_IA64_GRANULE_16MB=y
+# CONFIG_IA64_GRANULE_64MB is not set
+# CONFIG_IA64_PRINT_HAZARDS is not set
+# CONFIG_DISABLE_VHPT is not set
+# CONFIG_IA64_DEBUG_CMPXCHG is not set
+# CONFIG_IA64_DEBUG_IRQ is not set
+CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig
index 08112ab38468..87cfd31a4a39 100644
--- a/arch/ia64/configs/sn2_defconfig
+++ b/arch/ia64/configs/sn2_defconfig
@@ -80,6 +80,8 @@ CONFIG_MCKINLEY=y
 # CONFIG_IA64_PAGE_SIZE_8KB is not set
 CONFIG_IA64_PAGE_SIZE_16KB=y
 # CONFIG_IA64_PAGE_SIZE_64KB is not set
+# CONFIG_PGTABLE_3 is not set
+CONFIG_PGTABLE_4=y
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_HZ_1000 is not set
diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig
index d452e18ac494..9bc8bcafc905 100644
--- a/arch/ia64/configs/tiger_defconfig
+++ b/arch/ia64/configs/tiger_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc6-tiger-smp
-# Wed Aug 17 10:19:51 2005
+# Linux kernel version: 2.6.14-rc1
+# Wed Sep 14 15:17:57 2005
 #
 
 #
@@ -16,6 +16,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -27,6 +28,7 @@ CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
@@ -103,6 +105,7 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_HAVE_DEC_LOCK=y
 CONFIG_IA32_SUPPORT=y
 CONFIG_COMPAT=y
@@ -115,6 +118,7 @@ CONFIG_IA64_PALINFO=y
 #
 CONFIG_EFI_VARS=y
 CONFIG_EFI_PCDP=y
+# CONFIG_DELL_RBU is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 
@@ -122,20 +126,27 @@ CONFIG_BINFMT_MISC=m
 # Power management and ACPI
 #
 CONFIG_PM=y
-CONFIG_ACPI=y
+# CONFIG_PM_DEBUG is not set
 
 #
 # ACPI (Advanced Configuration and Power Interface) Support
 #
+CONFIG_ACPI=y
 CONFIG_ACPI_BUTTON=m
 CONFIG_ACPI_FAN=m
 CONFIG_ACPI_PROCESSOR=m
-# CONFIG_ACPI_HOTPLUG_CPU is not set
+CONFIG_ACPI_HOTPLUG_CPU=y
 CONFIG_ACPI_THERMAL=m
+CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
-# CONFIG_ACPI_CONTAINER is not set
+CONFIG_ACPI_CONTAINER=m
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
 
 #
 # Bus options (PCI, PCMCIA)
@@ -144,7 +155,6 @@ CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -188,14 +198,19 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
 #
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
@@ -218,9 +233,11 @@ CONFIG_TCP_CONG_BIC=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
+# CONFIG_NETFILTER_NETLINK is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -235,6 +252,11 @@ CONFIG_FW_LOADER=m
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -247,7 +269,13 @@ CONFIG_FW_LOADER=m
 #
 # Plug and Play support
 #
-# CONFIG_PNP is not set
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
 
 #
 # Block devices
@@ -266,7 +294,6 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
 
 #
@@ -299,7 +326,8 @@ CONFIG_BLK_DEV_IDESCSI=m
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
 CONFIG_BLK_DEV_IDEPCI=y
 # CONFIG_IDEPCI_SHARE_IRQ is not set
 # CONFIG_BLK_DEV_OFFBOARD is not set
@@ -339,6 +367,7 @@ CONFIG_IDEDMA_AUTO=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -366,6 +395,7 @@ CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
@@ -454,6 +484,7 @@ CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_NET_SB1000 is not set
 
 #
 # ARCnet devices
@@ -461,6 +492,11 @@ CONFIG_DUMMY=m
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -481,6 +517,7 @@ CONFIG_TULIP=m
 # CONFIG_DE4X5 is not set
 # CONFIG_WINBOND_840 is not set
 # CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
 # CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
@@ -512,6 +549,7 @@ CONFIG_E1000=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
@@ -521,6 +559,7 @@ CONFIG_TIGON3=y
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -618,6 +657,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_ROCKETPORT is not set
 # CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
@@ -675,6 +715,7 @@ CONFIG_DRM_RADEON=m
 CONFIG_DRM_MGA=m
 CONFIG_DRM_SIS=m
 # CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
 CONFIG_RAW_DRIVER=m
 CONFIG_HPET=y
 # CONFIG_HPET_RTC_IRQ is not set
@@ -691,7 +732,6 @@ CONFIG_MAX_RAW_DEVS=256
 # I2C support
 #
 # CONFIG_I2C is not set
-# CONFIG_I2C_SENSOR is not set
 
 #
 # Dallas's 1-wire bus
@@ -702,6 +742,7 @@ CONFIG_MAX_RAW_DEVS=256
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
@@ -709,6 +750,10 @@ CONFIG_HWMON=y
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -800,9 +845,11 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_MTOUCH is not set
 # CONFIG_USB_ITMTOUCH is not set
 # CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
 
 #
 # USB Imaging devices
@@ -902,16 +949,12 @@ CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=y
 CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -919,6 +962,7 @@ CONFIG_INOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -947,13 +991,11 @@ CONFIG_NTFS_FS=m
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1003,6 +1045,7 @@ CONFIG_CIFS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1072,10 +1115,12 @@ CONFIG_NLS_UTF8=m
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
 
 #
 # Profiling support
@@ -1089,6 +1134,7 @@ CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=20
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig
index 80b0e9eb7fb3..0856ca67dd50 100644
--- a/arch/ia64/configs/zx1_defconfig
+++ b/arch/ia64/configs/zx1_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc6
-# Wed Aug 17 10:02:43 2005
+# Linux kernel version: 2.6.14-rc1
+# Wed Sep 14 15:15:01 2005
 #
 
 #
@@ -18,6 +18,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
@@ -29,6 +30,7 @@ CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 # CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
@@ -103,6 +105,7 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_HAVE_DEC_LOCK=y
 CONFIG_IA32_SUPPORT=y
 CONFIG_COMPAT=y
@@ -115,6 +118,7 @@ CONFIG_IA64_PALINFO=y
 #
 CONFIG_EFI_VARS=y
 CONFIG_EFI_PCDP=y
+# CONFIG_DELL_RBU is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 
@@ -122,28 +126,34 @@ CONFIG_BINFMT_MISC=y
 # Power management and ACPI
 #
 CONFIG_PM=y
-CONFIG_ACPI=y
+# CONFIG_PM_DEBUG is not set
 
 #
 # ACPI (Advanced Configuration and Power Interface) Support
 #
+CONFIG_ACPI=y
 CONFIG_ACPI_BUTTON=y
 CONFIG_ACPI_FAN=y
 CONFIG_ACPI_PROCESSOR=y
 CONFIG_ACPI_THERMAL=y
+CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 # CONFIG_ACPI_CONTAINER is not set
 
 #
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
 # Bus options (PCI, PCMCIA)
 #
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -187,8 +197,8 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 
@@ -204,7 +214,6 @@ CONFIG_NETFILTER=y
 # IP: Netfilter Configuration
 #
 # CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 CONFIG_IP_NF_ARPTABLES=y
@@ -212,6 +221,11 @@ CONFIG_IP_NF_ARPTABLES=y
 # CONFIG_IP_NF_ARP_MANGLE is not set
 
 #
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
@@ -234,9 +248,11 @@ CONFIG_IP_NF_ARPTABLES=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
+# CONFIG_NETFILTER_NETLINK is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -251,6 +267,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -263,7 +284,13 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Plug and Play support
 #
-# CONFIG_PNP is not set
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
 
 #
 # Block devices
@@ -282,7 +309,6 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
 
 #
@@ -315,7 +341,8 @@ CONFIG_BLK_DEV_IDECD=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
 CONFIG_BLK_DEV_IDEPCI=y
 CONFIG_IDEPCI_SHARE_IRQ=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
@@ -354,6 +381,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -381,6 +409,7 @@ CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
@@ -457,6 +486,7 @@ CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_NET_SB1000 is not set
 
 #
 # ARCnet devices
@@ -464,6 +494,11 @@ CONFIG_DUMMY=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -485,6 +520,7 @@ CONFIG_TULIP_NAPI_HW_MITIGATION=y
 # CONFIG_DE4X5 is not set
 # CONFIG_WINBOND_840 is not set
 # CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
 # CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
@@ -516,6 +552,7 @@ CONFIG_E1000=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
@@ -525,6 +562,7 @@ CONFIG_TIGON3=y
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -650,12 +688,12 @@ CONFIG_AGP=y
 CONFIG_AGP_HP_ZX1=y
 CONFIG_DRM=y
 # CONFIG_DRM_TDFX is not set
-# CONFIG_DRM_GAMMA is not set
 # CONFIG_DRM_R128 is not set
 CONFIG_DRM_RADEON=y
 # CONFIG_DRM_MGA is not set
 # CONFIG_DRM_SIS is not set
 # CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_HPET is not set
 # CONFIG_HANGCHECK_TIMER is not set
@@ -689,7 +727,6 @@ CONFIG_I2C_ALGOPCF=y
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
@@ -703,7 +740,6 @@ CONFIG_I2C_ALGOPCF=y
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_SENSOR is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -730,12 +766,17 @@ CONFIG_I2C_ALGOPCF=y
 # Hardware Monitoring support
 #
 # CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
 
 #
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 CONFIG_VIDEO_DEV=y
@@ -806,6 +847,7 @@ CONFIG_FB_RADEON_DEBUG=y
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_PM3 is not set
 # CONFIG_FB_S1D13XXX is not set
@@ -862,11 +904,12 @@ CONFIG_SND_OPL3_LIB=y
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
 
 #
 # PCI devices
 #
-CONFIG_SND_AC97_CODEC=y
 # CONFIG_SND_ALI5451 is not set
 # CONFIG_SND_ATIIXP is not set
 # CONFIG_SND_ATIIXP_MODEM is not set
@@ -890,7 +933,7 @@ CONFIG_SND_AC97_CODEC=y
 # CONFIG_SND_HDSPM is not set
 # CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_AD1889 is not set
 # CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_ENS1370 is not set
 # CONFIG_SND_ENS1371 is not set
@@ -952,9 +995,8 @@ CONFIG_USB_UHCI_HCD=y
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_AUDIO is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
 # CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
@@ -971,6 +1013,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 
 #
 # USB Input Devices
@@ -987,9 +1030,11 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_MTOUCH is not set
 # CONFIG_USB_ITMTOUCH is not set
 # CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
 
 #
 # USB Imaging devices
@@ -1088,10 +1133,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1100,6 +1141,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -1126,13 +1168,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1177,6 +1217,7 @@ CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1246,10 +1287,12 @@ CONFIG_NLS_UTF8=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
 
 #
 # Profiling support
@@ -1263,6 +1306,7 @@ CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=17
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig
index 5da208115ea1..275a26c6e5aa 100644
--- a/arch/ia64/defconfig
+++ b/arch/ia64/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12
-# Tue Jun 21 11:30:42 2005
+# Linux kernel version: 2.6.14-rc1
+# Wed Sep 14 15:13:03 2005
 #
 
 #
@@ -16,6 +16,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -27,6 +28,7 @@ CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
@@ -80,6 +82,12 @@ CONFIG_MCKINLEY=y
 # CONFIG_IA64_PAGE_SIZE_8KB is not set
 CONFIG_IA64_PAGE_SIZE_16KB=y
 # CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
 CONFIG_IA64_L1_CACHE_SHIFT=7
 CONFIG_NUMA=y
 CONFIG_VIRTUAL_MEM_MAP=y
@@ -87,12 +95,21 @@ CONFIG_HOLES_IN_ZONE=y
 CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
 CONFIG_IA64_CYCLONE=y
 CONFIG_IOSAPIC=y
+# CONFIG_IA64_SGI_SN_XP is not set
 CONFIG_FORCE_MAX_ZONEORDER=18
 CONFIG_SMP=y
 CONFIG_NR_CPUS=512
 CONFIG_HOTPLUG_CPU=y
 # CONFIG_SCHED_SMT is not set
 # CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_HAVE_DEC_LOCK=y
 CONFIG_IA32_SUPPORT=y
 CONFIG_COMPAT=y
@@ -105,6 +122,7 @@ CONFIG_IA64_PALINFO=y
 #
 CONFIG_EFI_VARS=y
 CONFIG_EFI_PCDP=y
+# CONFIG_DELL_RBU is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 
@@ -112,30 +130,36 @@ CONFIG_BINFMT_MISC=m
 # Power management and ACPI
 #
 CONFIG_PM=y
-CONFIG_ACPI=y
+# CONFIG_PM_DEBUG is not set
 
 #
 # ACPI (Advanced Configuration and Power Interface) Support
 #
+CONFIG_ACPI=y
 CONFIG_ACPI_BUTTON=m
 CONFIG_ACPI_FAN=m
 CONFIG_ACPI_PROCESSOR=m
 CONFIG_ACPI_HOTPLUG_CPU=y
 CONFIG_ACPI_THERMAL=m
 CONFIG_ACPI_NUMA=y
+CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 CONFIG_ACPI_CONTAINER=m
 
 #
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
 # Bus options (PCI, PCMCIA)
 #
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -147,6 +171,7 @@ CONFIG_HOTPLUG_PCI_ACPI=m
 # CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
 # CONFIG_HOTPLUG_PCI_CPCI is not set
 # CONFIG_HOTPLUG_PCI_SHPC is not set
+# CONFIG_HOTPLUG_PCI_SGI is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -154,6 +179,73 @@ CONFIG_HOTPLUG_PCI_ACPI=m
 # CONFIG_PCCARD is not set
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
 # Device Drivers
 #
 
@@ -162,10 +254,15 @@ CONFIG_HOTPLUG_PCI_ACPI=m
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -178,7 +275,13 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Plug and Play support
 #
-# CONFIG_PNP is not set
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
 
 #
 # Block devices
@@ -197,7 +300,6 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
 
 #
@@ -230,7 +332,8 @@ CONFIG_BLK_DEV_IDESCSI=m
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
 CONFIG_BLK_DEV_IDEPCI=y
 # CONFIG_IDEPCI_SHARE_IRQ is not set
 # CONFIG_BLK_DEV_OFFBOARD is not set
@@ -252,6 +355,7 @@ CONFIG_BLK_DEV_CMD64X=y
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
 # CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -270,6 +374,7 @@ CONFIG_IDEDMA_AUTO=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -297,6 +402,7 @@ CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
@@ -314,6 +420,7 @@ CONFIG_SCSI_SATA=y
 # CONFIG_SCSI_SATA_AHCI is not set
 # CONFIG_SCSI_SATA_SVW is not set
 # CONFIG_SCSI_ATA_PIIX is not set
+# CONFIG_SCSI_SATA_MV is not set
 # CONFIG_SCSI_SATA_NV is not set
 # CONFIG_SCSI_SATA_PROMISE is not set
 # CONFIG_SCSI_SATA_QSTOR is not set
@@ -335,7 +442,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
 CONFIG_SCSI_QLOGIC_1280=y
 # CONFIG_SCSI_QLOGIC_1280_1040 is not set
 CONFIG_SCSI_QLA2XXX=y
@@ -344,6 +450,7 @@ CONFIG_SCSI_QLA22XX=m
 CONFIG_SCSI_QLA2300=m
 CONFIG_SCSI_QLA2322=m
 # CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -390,74 +497,14 @@ CONFIG_FUSION_MAX_SGE=128
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-CONFIG_ARPD=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
+# Network device support
 #
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_NET_SB1000 is not set
 
 #
 # ARCnet devices
@@ -465,6 +512,11 @@ CONFIG_DUMMY=m
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -485,6 +537,7 @@ CONFIG_TULIP=m
 # CONFIG_DE4X5 is not set
 # CONFIG_WINBOND_840 is not set
 # CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
 # CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
@@ -516,6 +569,7 @@ CONFIG_E1000=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
@@ -525,6 +579,7 @@ CONFIG_TIGON3=y
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -549,6 +604,10 @@ CONFIG_TIGON3=y
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 CONFIG_NETCONSOLE=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 
 #
 # ISDN subsystem
@@ -607,9 +666,7 @@ CONFIG_GAMEPORT=m
 # CONFIG_GAMEPORT_NS558 is not set
 # CONFIG_GAMEPORT_L4 is not set
 # CONFIG_GAMEPORT_EMU10K1 is not set
-# CONFIG_GAMEPORT_VORTEX is not set
 # CONFIG_GAMEPORT_FM801 is not set
-# CONFIG_GAMEPORT_CS461X is not set
 
 #
 # Character devices
@@ -620,6 +677,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_ROCKETPORT is not set
 # CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
@@ -641,7 +699,6 @@ CONFIG_SERIAL_8250_NR_UARTS=6
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
 # CONFIG_SERIAL_8250_RSA is not set
 
 #
@@ -650,8 +707,8 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_SGI_L1_CONSOLE=y
-CONFIG_SERIAL_SGI_IOC4=y
 # CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_SGI_IOC4=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -684,6 +741,8 @@ CONFIG_DRM_R128=m
 CONFIG_DRM_RADEON=m
 CONFIG_DRM_MGA=m
 CONFIG_DRM_SIS=m
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
 CONFIG_RAW_DRIVER=m
 CONFIG_HPET=y
 # CONFIG_HPET_RTC_IRQ is not set
@@ -708,10 +767,21 @@ CONFIG_MMTIMER=y
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -753,6 +823,7 @@ CONFIG_SND_PCM_OSS=m
 CONFIG_SND_SEQUENCER_OSS=y
 CONFIG_SND_VERBOSE_PRINTK=y
 # CONFIG_SND_DEBUG is not set
+CONFIG_SND_GENERIC_DRIVER=y
 
 #
 # Generic devices
@@ -764,11 +835,12 @@ CONFIG_SND_VIRMIDI=m
 CONFIG_SND_MTPAV=m
 CONFIG_SND_SERIAL_U16550=m
 CONFIG_SND_MPU401=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
 
 #
 # PCI devices
 #
-CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_ALI5451 is not set
 # CONFIG_SND_ATIIXP is not set
 # CONFIG_SND_ATIIXP_MODEM is not set
@@ -790,9 +862,10 @@ CONFIG_SND_EMU10K1=m
 # CONFIG_SND_RME96 is not set
 # CONFIG_SND_RME9652 is not set
 # CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
 # CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_AD1889 is not set
 # CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_ENS1370 is not set
 # CONFIG_SND_ENS1371 is not set
@@ -844,6 +917,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_BIG_ENDIAN is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
@@ -853,9 +927,8 @@ CONFIG_USB_UHCI_HCD=m
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_AUDIO is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
 # CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
@@ -888,12 +961,17 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_MOUSE is not set
 # CONFIG_USB_AIPTEK is not set
 # CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
 # CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
 # CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
 
 #
 # USB Imaging devices
@@ -918,7 +996,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=m
+CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -944,10 +1022,11 @@ CONFIG_USB_MON=m
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
 # CONFIG_USB_TEST is not set
 
 #
-# USB ATM/DSL drivers
+# USB DSL modem support
 #
 
 #
@@ -964,6 +1043,8 @@ CONFIG_USB_MON=m
 # InfiniBand support
 #
 CONFIG_INFINIBAND=m
+# CONFIG_INFINIBAND_USER_MAD is not set
+# CONFIG_INFINIBAND_USER_ACCESS is not set
 CONFIG_INFINIBAND_MTHCA=m
 # CONFIG_INFINIBAND_MTHCA_DEBUG is not set
 CONFIG_INFINIBAND_IPOIB=m
@@ -981,6 +1062,7 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -996,22 +1078,20 @@ CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=y
 CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -1040,14 +1120,11 @@ CONFIG_NTFS_FS=m
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1071,15 +1148,18 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 CONFIG_NFS_DIRECTIO=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
 CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
 CONFIG_RPCSEC_GSS_KRB5=m
@@ -1094,6 +1174,7 @@ CONFIG_CIFS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1163,10 +1244,12 @@ CONFIG_NLS_UTF8=m
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
 
 #
 # HP Simulator drivers
@@ -1187,6 +1270,7 @@ CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=20
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1194,6 +1278,7 @@ CONFIG_LOG_BUF_SHIFT=20
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_KPROBES is not set
 CONFIG_IA64_GRANULE_16MB=y
 # CONFIG_IA64_GRANULE_64MB is not set
 # CONFIG_IA64_PRINT_HAZARDS is not set
@@ -1215,7 +1300,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
diff --git a/arch/ia64/hp/common/hwsw_iommu.c b/arch/ia64/hp/common/hwsw_iommu.c
index 80f8ef013939..a5a5637507be 100644
--- a/arch/ia64/hp/common/hwsw_iommu.c
+++ b/arch/ia64/hp/common/hwsw_iommu.c
@@ -17,7 +17,7 @@
 #include <asm/machvec.h>
 
 /* swiotlb declarations & definitions: */
-extern void swiotlb_init_with_default_size (size_t size);
+extern int swiotlb_late_init_with_default_size (size_t size);
 extern ia64_mv_dma_alloc_coherent	swiotlb_alloc_coherent;
 extern ia64_mv_dma_free_coherent	swiotlb_free_coherent;
 extern ia64_mv_dma_map_single		swiotlb_map_single;
@@ -67,11 +67,20 @@ void
 hwsw_init (void)
 {
 	/* default to a smallish 2MB sw I/O TLB */
-	swiotlb_init_with_default_size (2 * (1<<20));
+	if (swiotlb_late_init_with_default_size (2 * (1<<20)) != 0) {
+#ifdef CONFIG_IA64_GENERIC
+		/* Better to have normal DMA than panic */
+		printk(KERN_WARNING "%s: Failed to initialize software I/O TLB,"
+		       " reverting to hpzx1 platform vector\n", __FUNCTION__);
+		machvec_init("hpzx1");
+#else
+		panic("Unable to initialize software I/O TLB services");
+#endif
+	}
 }
 
 void *
-hwsw_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, int flags)
+hwsw_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flags)
 {
 	if (use_swiotlb(dev))
 		return swiotlb_alloc_coherent(dev, size, dma_handle, flags);
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index 11957598a8b9..bdccd0b1eb60 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -1076,7 +1076,7 @@ void sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size, int dir)
  * See Documentation/DMA-mapping.txt
  */
 void *
-sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, int flags)
+sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flags)
 {
 	struct ioc *ioc;
 	void *addr;
@@ -2028,9 +2028,40 @@ static struct acpi_driver acpi_sba_ioc_driver = {
 static int __init
 sba_init(void)
 {
+	if (!ia64_platform_is("hpzx1") && !ia64_platform_is("hpzx1_swiotlb"))
+		return 0;
+
 	acpi_bus_register_driver(&acpi_sba_ioc_driver);
-	if (!ioc_list)
+	if (!ioc_list) {
+#ifdef CONFIG_IA64_GENERIC
+		extern int swiotlb_late_init_with_default_size (size_t size);
+
+		/*
+		 * If we didn't find something sba_iommu can claim, we
+		 * need to setup the swiotlb and switch to the dig machvec.
+		 */
+		if (swiotlb_late_init_with_default_size(64 * (1<<20)) != 0)
+			panic("Unable to find SBA IOMMU or initialize "
+			      "software I/O TLB: Try machvec=dig boot option");
+		machvec_init("dig");
+#else
+		panic("Unable to find SBA IOMMU: Try a generic or DIG kernel");
+#endif
 		return 0;
+	}
+
+#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_HP_ZX1_SWIOTLB)
+	/*
+	 * hpzx1_swiotlb needs to have a fairly small swiotlb bounce
+	 * buffer setup to support devices with smaller DMA masks than
+	 * sba_iommu can handle.
+	 */
+	if (ia64_platform_is("hpzx1_swiotlb")) {
+		extern void hwsw_init(void);
+
+		hwsw_init();
+	}
+#endif
 
 #ifdef CONFIG_PCI
 	{
@@ -2048,18 +2079,6 @@ sba_init(void)
 
 subsys_initcall(sba_init); /* must be initialized after ACPI etc., but before any drivers... */
 
-extern void dig_setup(char**);
-/*
- * MAX_DMA_ADDRESS needs to be setup prior to paging_init to do any good,
- * so we use the platform_setup hook to fix it up.
- */
-void __init
-sba_setup(char **cmdline_p)
-{
-	MAX_DMA_ADDRESS = ~0UL;
-	dig_setup(cmdline_p);
-}
-
 static int __init
 nosbagart(char *str)
 {
diff --git a/arch/ia64/hp/sim/simscsi.c b/arch/ia64/hp/sim/simscsi.c
index 56405dbfd739..a3fe97531134 100644
--- a/arch/ia64/hp/sim/simscsi.c
+++ b/arch/ia64/hp/sim/simscsi.c
@@ -205,10 +205,11 @@ simscsi_get_disk_size (int fd)
 	char buf[512];
 
 	/*
-	 * This is a bit kludgey: the simulator doesn't provide a direct way of determining
-	 * the disk size, so we do a binary search, assuming a maximum disk size of 4GB.
+	 * This is a bit kludgey: the simulator doesn't provide a
+	 * direct way of determining the disk size, so we do a binary
+	 * search, assuming a maximum disk size of 128GB.
 	 */
-	for (bit = (4UL << 30)/512; bit != 0; bit >>= 1) {
+	for (bit = (128UL << 30)/512; bit != 0; bit >>= 1) {
 		req.addr = __pa(&buf);
 		req.len = sizeof(buf);
 		ia64_ssc(fd, 1, __pa(&req), ((sectors | bit) - 1)*512, SSC_READ);
@@ -225,14 +226,33 @@ simscsi_readwrite10 (struct scsi_cmnd *sc, int mode)
 {
 	unsigned long offset;
 
-	offset = (  (sc->cmnd[2] << 24) | (sc->cmnd[3] << 16)
-		  | (sc->cmnd[4] <<  8) | (sc->cmnd[5] <<  0))*512;
+	offset = (((unsigned long)sc->cmnd[2] << 24) 
+		| ((unsigned long)sc->cmnd[3] << 16)
+		| ((unsigned long)sc->cmnd[4] <<  8) 
+		| ((unsigned long)sc->cmnd[5] <<  0))*512UL;
 	if (sc->use_sg > 0)
 		simscsi_sg_readwrite(sc, mode, offset);
 	else
 		simscsi_readwrite(sc, mode, offset, ((sc->cmnd[7] << 8) | sc->cmnd[8])*512);
 }
 
+static void simscsi_fillresult(struct scsi_cmnd *sc, char *buf, unsigned len)
+{
+
+	int scatterlen = sc->use_sg;
+	struct scatterlist *slp;
+
+	if (scatterlen == 0)
+		memcpy(sc->request_buffer, buf, len);
+	else for (slp = (struct scatterlist *)sc->buffer; scatterlen-- > 0 && len > 0; slp++) {
+		unsigned thislen = min(len, slp->length);
+
+		memcpy(page_address(slp->page) + slp->offset, buf, thislen);
+		slp++;
+		len -= thislen;
+	}
+}
+
 static int
 simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 {
@@ -240,6 +260,7 @@ simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 	char fname[MAX_ROOT_LEN+16];
 	size_t disk_size;
 	char *buf;
+	char localbuf[36];
 #if DEBUG_SIMSCSI
 	register long sp asm ("sp");
 
@@ -263,7 +284,7 @@ simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 				/* disk doesn't exist... */
 				break;
 			}
-			buf = sc->request_buffer;
+			buf = localbuf;
 			buf[0] = 0;	/* magnetic disk */
 			buf[1] = 0;	/* not a removable medium */
 			buf[2] = 2;	/* SCSI-2 compliant device */
@@ -273,6 +294,7 @@ simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 			buf[6] = 0;	/* reserved */
 			buf[7] = 0;	/* various flags */
 			memcpy(buf + 8, "HP      SIMULATED DISK  0.00",  28);
+			simscsi_fillresult(sc, buf, 36);
 			sc->result = GOOD;
 			break;
 
@@ -304,16 +326,13 @@ simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 			simscsi_readwrite10(sc, SSC_WRITE);
 			break;
 
-
 		      case READ_CAPACITY:
 			if (desc[target_id] < 0 || sc->request_bufflen < 8) {
 				break;
 			}
-			buf = sc->request_buffer;
-
+			buf = localbuf;
 			disk_size = simscsi_get_disk_size(desc[target_id]);
 
-			/* pretend to be a 1GB disk (partition table contains real stuff): */
 			buf[0] = (disk_size >> 24) & 0xff;
 			buf[1] = (disk_size >> 16) & 0xff;
 			buf[2] = (disk_size >>  8) & 0xff;
@@ -323,13 +342,14 @@ simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 			buf[5] = 0;
 			buf[6] = 2;
 			buf[7] = 0;
+			simscsi_fillresult(sc, buf, 8);
 			sc->result = GOOD;
 			break;
 
 		      case MODE_SENSE:
 		      case MODE_SENSE_10:
 			/* sd.c uses this to determine whether disk does write-caching. */
-			memset(sc->request_buffer, 0, 128);
+			simscsi_fillresult(sc, (char *)empty_zero_page, sc->request_bufflen);
 			sc->result = GOOD;
 			break;
 
diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
index b42ec37be51c..19ee635eeb70 100644
--- a/arch/ia64/hp/sim/simserial.c
+++ b/arch/ia64/hp/sim/simserial.c
@@ -642,10 +642,8 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
 	info->event = 0;
 	info->tty = 0;
 	if (info->blocked_open) {
-		if (info->close_delay) {
-			current->state = TASK_INTERRUPTIBLE;
-			schedule_timeout(info->close_delay);
-		}
+		if (info->close_delay)
+			schedule_timeout_interruptible(info->close_delay);
 		wake_up_interruptible(&info->open_wait);
 	}
 	info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
diff --git a/arch/ia64/ia32/ia32_ioctl.c b/arch/ia64/ia32/ia32_ioctl.c
index 164b211f4174..88739394f6df 100644
--- a/arch/ia64/ia32/ia32_ioctl.c
+++ b/arch/ia64/ia32/ia32_ioctl.c
@@ -29,10 +29,8 @@
 #define CODE
 #include "compat_ioctl.c"
 
-typedef int (* ioctl32_handler_t)(unsigned int, unsigned int, unsigned long, struct file *);
-
 #define COMPATIBLE_IOCTL(cmd)		HANDLE_IOCTL((cmd),sys_ioctl)
-#define HANDLE_IOCTL(cmd,handler)	{ (cmd), (ioctl32_handler_t)(handler), NULL },
+#define HANDLE_IOCTL(cmd,handler)	{ (cmd), (ioctl_trans_handler_t)(handler), NULL },
 #define IOCTL_TABLE_START \
 	struct ioctl_trans ioctl_start[] = {
 #define IOCTL_TABLE_END \
diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c
index 3fa67ecebc83..dc282710421a 100644
--- a/arch/ia64/ia32/sys_ia32.c
+++ b/arch/ia64/ia32/sys_ia32.c
@@ -36,6 +36,7 @@
 #include <linux/uio.h>
 #include <linux/nfs_fs.h>
 #include <linux/quota.h>
+#include <linux/syscalls.h>
 #include <linux/sunrpc/svc.h>
 #include <linux/nfsd/nfsd.h>
 #include <linux/nfsd/cache.h>
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 7e926471e4ec..9ad94ddf6687 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -838,7 +838,7 @@ EXPORT_SYMBOL(acpi_unmap_lsapic);
 #endif				/* CONFIG_ACPI_HOTPLUG_CPU */
 
 #ifdef CONFIG_ACPI_NUMA
-acpi_status __devinit
+static acpi_status __devinit
 acpi_map_iosapic(acpi_handle handle, u32 depth, void *context, void **ret)
 {
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
@@ -890,7 +890,16 @@ acpi_map_iosapic(acpi_handle handle, u32 depth, void *context, void **ret)
 	map_iosapic_to_node(gsi_base, node);
 	return AE_OK;
 }
-#endif				/* CONFIG_NUMA */
+
+static int __init
+acpi_map_iosapics (void)
+{
+	acpi_get_devices(NULL, acpi_map_iosapic, NULL, NULL);
+	return 0;
+}
+
+fs_initcall(acpi_map_iosapics);
+#endif				/* CONFIG_ACPI_NUMA */
 
 int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base)
 {
diff --git a/arch/ia64/kernel/cyclone.c b/arch/ia64/kernel/cyclone.c
index 768c7e46957c..6ade3790ce07 100644
--- a/arch/ia64/kernel/cyclone.c
+++ b/arch/ia64/kernel/cyclone.c
@@ -2,6 +2,7 @@
 #include <linux/smp.h>
 #include <linux/time.h>
 #include <linux/errno.h>
+#include <linux/timex.h>
 #include <asm/io.h>
 
 /* IBM Summit (EXA) Cyclone counter code*/
diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c
index 179f230816ed..a3aa45cbcfa0 100644
--- a/arch/ia64/kernel/efi.c
+++ b/arch/ia64/kernel/efi.c
@@ -239,57 +239,30 @@ is_available_memory (efi_memory_desc_t *md)
 	return 0;
 }
 
-/*
- * Trim descriptor MD so its starts at address START_ADDR.  If the descriptor covers
- * memory that is normally available to the kernel, issue a warning that some memory
- * is being ignored.
- */
-static void
-trim_bottom (efi_memory_desc_t *md, u64 start_addr)
-{
-	u64 num_skipped_pages;
+typedef struct kern_memdesc {
+	u64 attribute;
+	u64 start;
+	u64 num_pages;
+} kern_memdesc_t;
 
-	if (md->phys_addr >= start_addr || !md->num_pages)
-		return;
-
-	num_skipped_pages = (start_addr - md->phys_addr) >> EFI_PAGE_SHIFT;
-	if (num_skipped_pages > md->num_pages)
-		num_skipped_pages = md->num_pages;
-
-	if (is_available_memory(md))
-		printk(KERN_NOTICE "efi.%s: ignoring %luKB of memory at 0x%lx due to granule hole "
-		       "at 0x%lx\n", __FUNCTION__,
-		       (num_skipped_pages << EFI_PAGE_SHIFT) >> 10,
-		       md->phys_addr, start_addr - IA64_GRANULE_SIZE);
-	/*
-	 * NOTE: Don't set md->phys_addr to START_ADDR because that could cause the memory
-	 * descriptor list to become unsorted.  In such a case, md->num_pages will be
-	 * zero, so the Right Thing will happen.
-	 */
-	md->phys_addr += num_skipped_pages << EFI_PAGE_SHIFT;
-	md->num_pages -= num_skipped_pages;
-}
+static kern_memdesc_t *kern_memmap;
 
 static void
-trim_top (efi_memory_desc_t *md, u64 end_addr)
+walk (efi_freemem_callback_t callback, void *arg, u64 attr)
 {
-	u64 num_dropped_pages, md_end_addr;
-
-	md_end_addr = md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT);
-
-	if (md_end_addr <= end_addr || !md->num_pages)
-		return;
+	kern_memdesc_t *k;
+	u64 start, end, voff;
 
-	num_dropped_pages = (md_end_addr - end_addr) >> EFI_PAGE_SHIFT;
-	if (num_dropped_pages > md->num_pages)
-		num_dropped_pages = md->num_pages;
-
-	if (is_available_memory(md))
-		printk(KERN_NOTICE "efi.%s: ignoring %luKB of memory at 0x%lx due to granule hole "
-		       "at 0x%lx\n", __FUNCTION__,
-		       (num_dropped_pages << EFI_PAGE_SHIFT) >> 10,
-		       md->phys_addr, end_addr);
-	md->num_pages -= num_dropped_pages;
+	voff = (attr == EFI_MEMORY_WB) ? PAGE_OFFSET : __IA64_UNCACHED_OFFSET;
+	for (k = kern_memmap; k->start != ~0UL; k++) {
+		if (k->attribute != attr)
+			continue;
+		start = PAGE_ALIGN(k->start);
+		end = (k->start + (k->num_pages << EFI_PAGE_SHIFT)) & PAGE_MASK;
+		if (start < end)
+			if ((*callback)(start + voff, end + voff, arg) < 0)
+				return;
+	}
 }
 
 /*
@@ -299,148 +272,19 @@ trim_top (efi_memory_desc_t *md, u64 end_addr)
 void
 efi_memmap_walk (efi_freemem_callback_t callback, void *arg)
 {
-	int prev_valid = 0;
-	struct range {
-		u64 start;
-		u64 end;
-	} prev, curr;
-	void *efi_map_start, *efi_map_end, *p, *q;
-	efi_memory_desc_t *md, *check_md;
-	u64 efi_desc_size, start, end, granule_addr, last_granule_addr, first_non_wb_addr = 0;
-	unsigned long total_mem = 0;
-
-	efi_map_start = __va(ia64_boot_param->efi_memmap);
-	efi_map_end   = efi_map_start + ia64_boot_param->efi_memmap_size;
-	efi_desc_size = ia64_boot_param->efi_memdesc_size;
-
-	for (p = efi_map_start; p < efi_map_end; p += efi_desc_size) {
-		md = p;
-
-		/* skip over non-WB memory descriptors; that's all we're interested in... */
-		if (!(md->attribute & EFI_MEMORY_WB))
-			continue;
-
-		/*
-		 * granule_addr is the base of md's first granule.
-		 * [granule_addr - first_non_wb_addr) is guaranteed to
-		 * be contiguous WB memory.
-		 */
-		granule_addr = GRANULEROUNDDOWN(md->phys_addr);
-		first_non_wb_addr = max(first_non_wb_addr, granule_addr);
-
-		if (first_non_wb_addr < md->phys_addr) {
-			trim_bottom(md, granule_addr + IA64_GRANULE_SIZE);
-			granule_addr = GRANULEROUNDDOWN(md->phys_addr);
-			first_non_wb_addr = max(first_non_wb_addr, granule_addr);
-		}
-
-		for (q = p; q < efi_map_end; q += efi_desc_size) {
-			check_md = q;
-
-			if ((check_md->attribute & EFI_MEMORY_WB) &&
-			    (check_md->phys_addr == first_non_wb_addr))
-				first_non_wb_addr += check_md->num_pages << EFI_PAGE_SHIFT;
-			else
-				break;		/* non-WB or hole */
-		}
-
-		last_granule_addr = GRANULEROUNDDOWN(first_non_wb_addr);
-		if (last_granule_addr < md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT))
-			trim_top(md, last_granule_addr);
-
-		if (is_available_memory(md)) {
-			if (md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) >= max_addr) {
-				if (md->phys_addr >= max_addr)
-					continue;
-				md->num_pages = (max_addr - md->phys_addr) >> EFI_PAGE_SHIFT;
-				first_non_wb_addr = max_addr;
-			}
-
-			if (total_mem >= mem_limit)
-				continue;
-
-			if (total_mem + (md->num_pages << EFI_PAGE_SHIFT) > mem_limit) {
-				unsigned long limit_addr = md->phys_addr;
-
-				limit_addr += mem_limit - total_mem;
-				limit_addr = GRANULEROUNDDOWN(limit_addr);
-
-				if (md->phys_addr > limit_addr)
-					continue;
-
-				md->num_pages = (limit_addr - md->phys_addr) >>
-				                EFI_PAGE_SHIFT;
-				first_non_wb_addr = max_addr = md->phys_addr +
-				              (md->num_pages << EFI_PAGE_SHIFT);
-			}
-			total_mem += (md->num_pages << EFI_PAGE_SHIFT);
-
-			if (md->num_pages == 0)
-				continue;
-
-			curr.start = PAGE_OFFSET + md->phys_addr;
-			curr.end   = curr.start + (md->num_pages << EFI_PAGE_SHIFT);
-
-			if (!prev_valid) {
-				prev = curr;
-				prev_valid = 1;
-			} else {
-				if (curr.start < prev.start)
-					printk(KERN_ERR "Oops: EFI memory table not ordered!\n");
-
-				if (prev.end == curr.start) {
-					/* merge two consecutive memory ranges */
-					prev.end = curr.end;
-				} else {
-					start = PAGE_ALIGN(prev.start);
-					end = prev.end & PAGE_MASK;
-					if ((end > start) && (*callback)(start, end, arg) < 0)
-						return;
-					prev = curr;
-				}
-			}
-		}
-	}
-	if (prev_valid) {
-		start = PAGE_ALIGN(prev.start);
-		end = prev.end & PAGE_MASK;
-		if (end > start)
-			(*callback)(start, end, arg);
-	}
+	walk(callback, arg, EFI_MEMORY_WB);
 }
 
 /*
- * Walk the EFI memory map to pull out leftover pages in the lower
- * memory regions which do not end up in the regular memory map and
- * stick them into the uncached allocator
- *
- * The regular walk function is significantly more complex than the
- * uncached walk which means it really doesn't make sense to try and
- * marge the two.
+ * Walks the EFI memory map and calls CALLBACK once for each EFI memory descriptor that
+ * has memory that is available for uncached allocator.
  */
-void __init
-efi_memmap_walk_uc (efi_freemem_callback_t callback)
+void
+efi_memmap_walk_uc (efi_freemem_callback_t callback, void *arg)
 {
-	void *efi_map_start, *efi_map_end, *p;
-	efi_memory_desc_t *md;
-	u64 efi_desc_size, start, end;
-
-	efi_map_start = __va(ia64_boot_param->efi_memmap);
-	efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size;
-	efi_desc_size = ia64_boot_param->efi_memdesc_size;
-
-	for (p = efi_map_start; p < efi_map_end; p += efi_desc_size) {
-		md = p;
-		if (md->attribute == EFI_MEMORY_UC) {
-			start = PAGE_ALIGN(md->phys_addr);
-			end = PAGE_ALIGN((md->phys_addr+(md->num_pages << EFI_PAGE_SHIFT)) & PAGE_MASK);
-			if ((*callback)(start, end, NULL) < 0)
-				return;
-		}
-	}
+	walk(callback, arg, EFI_MEMORY_UC);
 }
 
-
 /*
  * Look for the PAL_CODE region reported by EFI and maps it using an
  * ITR to enable safe PAL calls in virtual mode.  See IA-64 Processor
@@ -862,3 +706,307 @@ efi_uart_console_only(void)
 	printk(KERN_ERR "Malformed %s value\n", name);
 	return 0;
 }
+
+#define efi_md_size(md)	(md->num_pages << EFI_PAGE_SHIFT)
+
+static inline u64
+kmd_end(kern_memdesc_t *kmd)
+{
+	return (kmd->start + (kmd->num_pages << EFI_PAGE_SHIFT));
+}
+
+static inline u64
+efi_md_end(efi_memory_desc_t *md)
+{
+	return (md->phys_addr + efi_md_size(md));
+}
+
+static inline int
+efi_wb(efi_memory_desc_t *md)
+{
+	return (md->attribute & EFI_MEMORY_WB);
+}
+
+static inline int
+efi_uc(efi_memory_desc_t *md)
+{
+	return (md->attribute & EFI_MEMORY_UC);
+}
+
+/*
+ * Look for the first granule aligned memory descriptor memory
+ * that is big enough to hold EFI memory map. Make sure this
+ * descriptor is atleast granule sized so it does not get trimmed
+ */
+struct kern_memdesc *
+find_memmap_space (void)
+{
+	u64	contig_low=0, contig_high=0;
+	u64	as = 0, ae;
+	void *efi_map_start, *efi_map_end, *p, *q;
+	efi_memory_desc_t *md, *pmd = NULL, *check_md;
+	u64	space_needed, efi_desc_size;
+	unsigned long total_mem = 0;
+
+	efi_map_start = __va(ia64_boot_param->efi_memmap);
+	efi_map_end   = efi_map_start + ia64_boot_param->efi_memmap_size;
+	efi_desc_size = ia64_boot_param->efi_memdesc_size;
+
+	/*
+	 * Worst case: we need 3 kernel descriptors for each efi descriptor
+	 * (if every entry has a WB part in the middle, and UC head and tail),
+	 * plus one for the end marker.
+	 */
+	space_needed = sizeof(kern_memdesc_t) *
+		(3 * (ia64_boot_param->efi_memmap_size/efi_desc_size) + 1);
+
+	for (p = efi_map_start; p < efi_map_end; pmd = md, p += efi_desc_size) {
+		md = p;
+		if (!efi_wb(md)) {
+			continue;
+		}
+		if (pmd == NULL || !efi_wb(pmd) || efi_md_end(pmd) != md->phys_addr) {
+			contig_low = GRANULEROUNDUP(md->phys_addr);
+			contig_high = efi_md_end(md);
+			for (q = p + efi_desc_size; q < efi_map_end; q += efi_desc_size) {
+				check_md = q;
+				if (!efi_wb(check_md))
+					break;
+				if (contig_high != check_md->phys_addr)
+					break;
+				contig_high = efi_md_end(check_md);
+			}
+			contig_high = GRANULEROUNDDOWN(contig_high);
+		}
+		if (!is_available_memory(md) || md->type == EFI_LOADER_DATA)
+			continue;
+
+		/* Round ends inward to granule boundaries */
+		as = max(contig_low, md->phys_addr);
+		ae = min(contig_high, efi_md_end(md));
+
+		/* keep within max_addr= command line arg */
+		ae = min(ae, max_addr);
+		if (ae <= as)
+			continue;
+
+		/* avoid going over mem= command line arg */
+		if (total_mem + (ae - as) > mem_limit)
+			ae -= total_mem + (ae - as) - mem_limit;
+
+		if (ae <= as)
+			continue;
+
+		if (ae - as > space_needed)
+			break;
+	}
+	if (p >= efi_map_end)
+		panic("Can't allocate space for kernel memory descriptors");
+
+	return __va(as);
+}
+
+/*
+ * Walk the EFI memory map and gather all memory available for kernel
+ * to use.  We can allocate partial granules only if the unavailable
+ * parts exist, and are WB.
+ */
+void
+efi_memmap_init(unsigned long *s, unsigned long *e)
+{
+	struct kern_memdesc *k, *prev = 0;
+	u64	contig_low=0, contig_high=0;
+	u64	as, ae, lim;
+	void *efi_map_start, *efi_map_end, *p, *q;
+	efi_memory_desc_t *md, *pmd = NULL, *check_md;
+	u64	efi_desc_size;
+	unsigned long total_mem = 0;
+
+	k = kern_memmap = find_memmap_space();
+
+	efi_map_start = __va(ia64_boot_param->efi_memmap);
+	efi_map_end   = efi_map_start + ia64_boot_param->efi_memmap_size;
+	efi_desc_size = ia64_boot_param->efi_memdesc_size;
+
+	for (p = efi_map_start; p < efi_map_end; pmd = md, p += efi_desc_size) {
+		md = p;
+		if (!efi_wb(md)) {
+			if (efi_uc(md) && (md->type == EFI_CONVENTIONAL_MEMORY ||
+				    	   md->type == EFI_BOOT_SERVICES_DATA)) {
+				k->attribute = EFI_MEMORY_UC;
+				k->start = md->phys_addr;
+				k->num_pages = md->num_pages;
+				k++;
+			}
+			continue;
+		}
+		if (pmd == NULL || !efi_wb(pmd) || efi_md_end(pmd) != md->phys_addr) {
+			contig_low = GRANULEROUNDUP(md->phys_addr);
+			contig_high = efi_md_end(md);
+			for (q = p + efi_desc_size; q < efi_map_end; q += efi_desc_size) {
+				check_md = q;
+				if (!efi_wb(check_md))
+					break;
+				if (contig_high != check_md->phys_addr)
+					break;
+				contig_high = efi_md_end(check_md);
+			}
+			contig_high = GRANULEROUNDDOWN(contig_high);
+		}
+		if (!is_available_memory(md))
+			continue;
+
+		/*
+		 * Round ends inward to granule boundaries
+		 * Give trimmings to uncached allocator
+		 */
+		if (md->phys_addr < contig_low) {
+			lim = min(efi_md_end(md), contig_low);
+			if (efi_uc(md)) {
+				if (k > kern_memmap && (k-1)->attribute == EFI_MEMORY_UC &&
+				    kmd_end(k-1) == md->phys_addr) {
+					(k-1)->num_pages += (lim - md->phys_addr) >> EFI_PAGE_SHIFT;
+				} else {
+					k->attribute = EFI_MEMORY_UC;
+					k->start = md->phys_addr;
+					k->num_pages = (lim - md->phys_addr) >> EFI_PAGE_SHIFT;
+					k++;
+				}
+			}
+			as = contig_low;
+		} else
+			as = md->phys_addr;
+
+		if (efi_md_end(md) > contig_high) {
+			lim = max(md->phys_addr, contig_high);
+			if (efi_uc(md)) {
+				if (lim == md->phys_addr && k > kern_memmap &&
+				    (k-1)->attribute == EFI_MEMORY_UC &&
+				    kmd_end(k-1) == md->phys_addr) {
+					(k-1)->num_pages += md->num_pages;
+				} else {
+					k->attribute = EFI_MEMORY_UC;
+					k->start = lim;
+					k->num_pages = (efi_md_end(md) - lim) >> EFI_PAGE_SHIFT;
+					k++;
+				}
+			}
+			ae = contig_high;
+		} else
+			ae = efi_md_end(md);
+
+		/* keep within max_addr= command line arg */
+		ae = min(ae, max_addr);
+		if (ae <= as)
+			continue;
+
+		/* avoid going over mem= command line arg */
+		if (total_mem + (ae - as) > mem_limit)
+			ae -= total_mem + (ae - as) - mem_limit;
+
+		if (ae <= as)
+			continue;
+		if (prev && kmd_end(prev) == md->phys_addr) {
+			prev->num_pages += (ae - as) >> EFI_PAGE_SHIFT;
+			total_mem += ae - as;
+			continue;
+		}
+		k->attribute = EFI_MEMORY_WB;
+		k->start = as;
+		k->num_pages = (ae - as) >> EFI_PAGE_SHIFT;
+		total_mem += ae - as;
+		prev = k++;
+	}
+	k->start = ~0L; /* end-marker */
+
+	/* reserve the memory we are using for kern_memmap */
+	*s = (u64)kern_memmap;
+	*e = (u64)++k;
+}
+
+void
+efi_initialize_iomem_resources(struct resource *code_resource,
+			       struct resource *data_resource)
+{
+	struct resource *res;
+	void *efi_map_start, *efi_map_end, *p;
+	efi_memory_desc_t *md;
+	u64 efi_desc_size;
+	char *name;
+	unsigned long flags;
+
+	efi_map_start = __va(ia64_boot_param->efi_memmap);
+	efi_map_end   = efi_map_start + ia64_boot_param->efi_memmap_size;
+	efi_desc_size = ia64_boot_param->efi_memdesc_size;
+
+	res = NULL;
+
+	for (p = efi_map_start; p < efi_map_end; p += efi_desc_size) {
+		md = p;
+
+		if (md->num_pages == 0) /* should not happen */
+			continue;
+
+		flags = IORESOURCE_MEM;
+		switch (md->type) {
+
+			case EFI_MEMORY_MAPPED_IO:
+			case EFI_MEMORY_MAPPED_IO_PORT_SPACE:
+				continue;
+
+			case EFI_LOADER_CODE:
+			case EFI_LOADER_DATA:
+			case EFI_BOOT_SERVICES_DATA:
+			case EFI_BOOT_SERVICES_CODE:
+			case EFI_CONVENTIONAL_MEMORY:
+				if (md->attribute & EFI_MEMORY_WP) {
+					name = "System ROM";
+					flags |= IORESOURCE_READONLY;
+				} else {
+					name = "System RAM";
+				}
+				break;
+
+			case EFI_ACPI_MEMORY_NVS:
+				name = "ACPI Non-volatile Storage";
+				flags |= IORESOURCE_BUSY;
+				break;
+
+			case EFI_UNUSABLE_MEMORY:
+				name = "reserved";
+				flags |= IORESOURCE_BUSY | IORESOURCE_DISABLED;
+				break;
+
+			case EFI_RESERVED_TYPE:
+			case EFI_RUNTIME_SERVICES_CODE:
+			case EFI_RUNTIME_SERVICES_DATA:
+			case EFI_ACPI_RECLAIM_MEMORY:
+			default:
+				name = "reserved";
+				flags |= IORESOURCE_BUSY;
+				break;
+		}
+
+		if ((res = kzalloc(sizeof(struct resource), GFP_KERNEL)) == NULL) {
+			printk(KERN_ERR "failed to alocate resource for iomem\n");
+			return;
+		}
+
+		res->name = name;
+		res->start = md->phys_addr;
+		res->end = md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) - 1;
+		res->flags = flags;
+
+		if (insert_resource(&iomem_resource, res) < 0)
+			kfree(res);
+		else {
+			/*
+			 * We don't know which region contains
+			 * kernel data so we try it repeatedly and
+			 * let the resource manager test it.
+			 */
+			insert_resource(res, code_resource);
+			insert_resource(res, data_resource);
+		}
+	}
+}
diff --git a/arch/ia64/kernel/ia64_ksyms.c b/arch/ia64/kernel/ia64_ksyms.c
index 01572814abe4..5db9d3bcbbcb 100644
--- a/arch/ia64/kernel/ia64_ksyms.c
+++ b/arch/ia64/kernel/ia64_ksyms.c
@@ -42,6 +42,7 @@ EXPORT_SYMBOL(clear_page);
 
 #ifdef CONFIG_VIRTUAL_MEM_MAP
 #include <linux/bootmem.h>
+EXPORT_SYMBOL(min_low_pfn);	/* defined by bootmem.c, but not exported by generic code */
 EXPORT_SYMBOL(max_low_pfn);	/* defined by bootmem.c, but not exported by generic code */
 #endif
 
diff --git a/arch/ia64/kernel/irq.c b/arch/ia64/kernel/irq.c
index 205d98028261..d33244c32759 100644
--- a/arch/ia64/kernel/irq.c
+++ b/arch/ia64/kernel/irq.c
@@ -57,9 +57,9 @@ int show_interrupts(struct seq_file *p, void *v)
 
 	if (i == 0) {
 		seq_printf(p, "           ");
-		for (j=0; j<NR_CPUS; j++)
-			if (cpu_online(j))
-				seq_printf(p, "CPU%d       ",j);
+		for_each_online_cpu(j) {
+			seq_printf(p, "CPU%d       ",j);
+		}
 		seq_putc(p, '\n');
 	}
 
@@ -72,9 +72,9 @@ int show_interrupts(struct seq_file *p, void *v)
 #ifndef CONFIG_SMP
 		seq_printf(p, "%10u ", kstat_irqs(i));
 #else
-		for (j = 0; j < NR_CPUS; j++)
-			if (cpu_online(j))
-				seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
+		for_each_online_cpu(j) {
+			seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
+		}
 #endif
 		seq_printf(p, " %14s", irq_desc[i].handler->typename);
 		seq_printf(p, "  %s", action->name);
diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S
index c13ca0d49c4a..301f2e9d262e 100644
--- a/arch/ia64/kernel/ivt.S
+++ b/arch/ia64/kernel/ivt.S
@@ -91,16 +91,17 @@ ENTRY(vhpt_miss)
 	 * (the "original") TLB miss, which may either be caused by an instruction
 	 * fetch or a data access (or non-access).
 	 *
-	 * What we do here is normal TLB miss handing for the _original_ miss, followed
-	 * by inserting the TLB entry for the virtual page table page that the VHPT
-	 * walker was attempting to access.  The latter gets inserted as long
-	 * as both L1 and L2 have valid mappings for the faulting address.
-	 * The TLB entry for the original miss gets inserted only if
-	 * the L3 entry indicates that the page is present.
+	 * What we do here is normal TLB miss handing for the _original_ miss,
+	 * followed by inserting the TLB entry for the virtual page table page
+	 * that the VHPT walker was attempting to access.  The latter gets
+	 * inserted as long as page table entry above pte level have valid
+	 * mappings for the faulting address.  The TLB entry for the original
+	 * miss gets inserted only if the pte entry indicates that the page is
+	 * present.
 	 *
 	 * do_page_fault gets invoked in the following cases:
 	 *	- the faulting virtual address uses unimplemented address bits
-	 *	- the faulting virtual address has no L1, L2, or L3 mapping
+	 *	- the faulting virtual address has no valid page table mapping
 	 */
 	mov r16=cr.ifa				// get address that caused the TLB miss
 #ifdef CONFIG_HUGETLB_PAGE
@@ -114,7 +115,7 @@ ENTRY(vhpt_miss)
 	shl r21=r16,3				// shift bit 60 into sign bit
 	shr.u r17=r16,61			// get the region number into r17
 	;;
-	shr r22=r21,3
+	shr.u r22=r21,3
 #ifdef CONFIG_HUGETLB_PAGE
 	extr.u r26=r25,2,6
 	;;
@@ -126,7 +127,7 @@ ENTRY(vhpt_miss)
 #endif
 	;;
 	cmp.eq p6,p7=5,r17			// is IFA pointing into to region 5?
-	shr.u r18=r22,PGDIR_SHIFT		// get bits 33-63 of the faulting address
+	shr.u r18=r22,PGDIR_SHIFT		// get bottom portion of pgd index bit
 	;;
 (p7)	dep r17=r17,r19,(PAGE_SHIFT-3),3	// put region number bits in place
 
@@ -137,24 +138,38 @@ ENTRY(vhpt_miss)
 (p6)	shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT
 (p7)	shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT-3
 	;;
-(p6)	dep r17=r18,r19,3,(PAGE_SHIFT-3)	// r17=PTA + IFA(33,42)*8
-(p7)	dep r17=r18,r17,3,(PAGE_SHIFT-6)	// r17=PTA + (((IFA(61,63) << 7) | IFA(33,39))*8)
+(p6)	dep r17=r18,r19,3,(PAGE_SHIFT-3)	// r17=pgd_offset for region 5
+(p7)	dep r17=r18,r17,3,(PAGE_SHIFT-6)	// r17=pgd_offset for region[0-4]
 	cmp.eq p7,p6=0,r21			// unused address bits all zeroes?
-	shr.u r18=r22,PMD_SHIFT			// shift L2 index into position
+#ifdef CONFIG_PGTABLE_4
+	shr.u r28=r22,PUD_SHIFT			// shift pud index into position
+#else
+	shr.u r18=r22,PMD_SHIFT			// shift pmd index into position
+#endif
+	;;
+	ld8 r17=[r17]				// get *pgd (may be 0)
+	;;
+(p7)	cmp.eq p6,p7=r17,r0			// was pgd_present(*pgd) == NULL?
+#ifdef CONFIG_PGTABLE_4
+	dep r28=r28,r17,3,(PAGE_SHIFT-3)	// r28=pud_offset(pgd,addr)
 	;;
-	ld8 r17=[r17]				// fetch the L1 entry (may be 0)
+	shr.u r18=r22,PMD_SHIFT			// shift pmd index into position
+(p7)	ld8 r29=[r28]				// get *pud (may be 0)
 	;;
-(p7)	cmp.eq p6,p7=r17,r0			// was L1 entry NULL?
-	dep r17=r18,r17,3,(PAGE_SHIFT-3)	// compute address of L2 page table entry
+(p7)	cmp.eq.or.andcm p6,p7=r29,r0		// was pud_present(*pud) == NULL?
+	dep r17=r18,r29,3,(PAGE_SHIFT-3)	// r17=pmd_offset(pud,addr)
+#else
+	dep r17=r18,r17,3,(PAGE_SHIFT-3)	// r17=pmd_offset(pgd,addr)
+#endif
 	;;
-(p7)	ld8 r20=[r17]				// fetch the L2 entry (may be 0)
-	shr.u r19=r22,PAGE_SHIFT		// shift L3 index into position
+(p7)	ld8 r20=[r17]				// get *pmd (may be 0)
+	shr.u r19=r22,PAGE_SHIFT		// shift pte index into position
 	;;
-(p7)	cmp.eq.or.andcm p6,p7=r20,r0		// was L2 entry NULL?
-	dep r21=r19,r20,3,(PAGE_SHIFT-3)	// compute address of L3 page table entry
+(p7)	cmp.eq.or.andcm p6,p7=r20,r0		// was pmd_present(*pmd) == NULL?
+	dep r21=r19,r20,3,(PAGE_SHIFT-3)	// r21=pte_offset(pmd,addr)
 	;;
-(p7)	ld8 r18=[r21]				// read the L3 PTE
-	mov r19=cr.isr				// cr.isr bit 0 tells us if this is an insn miss
+(p7)	ld8 r18=[r21]				// read *pte
+	mov r19=cr.isr				// cr.isr bit 32 tells us if this is an insn miss
 	;;
 (p7)	tbit.z p6,p7=r18,_PAGE_P_BIT		// page present bit cleared?
 	mov r22=cr.iha				// get the VHPT address that caused the TLB miss
@@ -188,18 +203,33 @@ ENTRY(vhpt_miss)
 	dv_serialize_data
 
 	/*
-	 * Re-check L2 and L3 pagetable.  If they changed, we may have received a ptc.g
+	 * Re-check pagetable entry.  If they changed, we may have received a ptc.g
 	 * between reading the pagetable and the "itc".  If so, flush the entry we
-	 * inserted and retry.
+	 * inserted and retry.  At this point, we have:
+	 *
+	 * r28 = equivalent of pud_offset(pgd, ifa)
+	 * r17 = equivalent of pmd_offset(pud, ifa)
+	 * r21 = equivalent of pte_offset(pmd, ifa)
+	 *
+	 * r29 = *pud
+	 * r20 = *pmd
+	 * r18 = *pte
 	 */
-	ld8 r25=[r21]				// read L3 PTE again
-	ld8 r26=[r17]				// read L2 entry again
+	ld8 r25=[r21]				// read *pte again
+	ld8 r26=[r17]				// read *pmd again
+#ifdef CONFIG_PGTABLE_4
+	ld8 r19=[r28]				// read *pud again
+#endif
+	cmp.ne p6,p7=r0,r0
 	;;
-	cmp.ne p6,p7=r26,r20			// did L2 entry change
+	cmp.ne.or.andcm p6,p7=r26,r20		// did *pmd change
+#ifdef CONFIG_PGTABLE_4
+	cmp.ne.or.andcm p6,p7=r19,r29		// did *pud change
+#endif
 	mov r27=PAGE_SHIFT<<2
 	;;
 (p6)	ptc.l r22,r27				// purge PTE page translation
-(p7)	cmp.ne.or.andcm p6,p7=r25,r18		// did L3 PTE change
+(p7)	cmp.ne.or.andcm p6,p7=r25,r18		// did *pte change
 	;;
 (p6)	ptc.l r16,r27				// purge translation
 #endif
@@ -214,19 +244,19 @@ END(vhpt_miss)
 ENTRY(itlb_miss)
 	DBG_FAULT(1)
 	/*
-	 * The ITLB handler accesses the L3 PTE via the virtually mapped linear
+	 * The ITLB handler accesses the PTE via the virtually mapped linear
 	 * page table.  If a nested TLB miss occurs, we switch into physical
-	 * mode, walk the page table, and then re-execute the L3 PTE read
-	 * and go on normally after that.
+	 * mode, walk the page table, and then re-execute the PTE read and
+	 * go on normally after that.
 	 */
 	mov r16=cr.ifa				// get virtual address
 	mov r29=b0				// save b0
 	mov r31=pr				// save predicates
 .itlb_fault:
-	mov r17=cr.iha				// get virtual address of L3 PTE
+	mov r17=cr.iha				// get virtual address of PTE
 	movl r30=1f				// load nested fault continuation point
 	;;
-1:	ld8 r18=[r17]				// read L3 PTE
+1:	ld8 r18=[r17]				// read *pte
 	;;
 	mov b0=r29
 	tbit.z p6,p0=r18,_PAGE_P_BIT		// page present bit cleared?
@@ -241,7 +271,7 @@ ENTRY(itlb_miss)
 	 */
 	dv_serialize_data
 
-	ld8 r19=[r17]				// read L3 PTE again and see if same
+	ld8 r19=[r17]				// read *pte again and see if same
 	mov r20=PAGE_SHIFT<<2			// setup page size for purge
 	;;
 	cmp.ne p7,p0=r18,r19
@@ -258,19 +288,19 @@ END(itlb_miss)
 ENTRY(dtlb_miss)
 	DBG_FAULT(2)
 	/*
-	 * The DTLB handler accesses the L3 PTE via the virtually mapped linear
+	 * The DTLB handler accesses the PTE via the virtually mapped linear
 	 * page table.  If a nested TLB miss occurs, we switch into physical
-	 * mode, walk the page table, and then re-execute the L3 PTE read
-	 * and go on normally after that.
+	 * mode, walk the page table, and then re-execute the PTE read and
+	 * go on normally after that.
 	 */
 	mov r16=cr.ifa				// get virtual address
 	mov r29=b0				// save b0
 	mov r31=pr				// save predicates
 dtlb_fault:
-	mov r17=cr.iha				// get virtual address of L3 PTE
+	mov r17=cr.iha				// get virtual address of PTE
 	movl r30=1f				// load nested fault continuation point
 	;;
-1:	ld8 r18=[r17]				// read L3 PTE
+1:	ld8 r18=[r17]				// read *pte
 	;;
 	mov b0=r29
 	tbit.z p6,p0=r18,_PAGE_P_BIT		// page present bit cleared?
@@ -285,7 +315,7 @@ dtlb_fault:
 	 */
 	dv_serialize_data
 
-	ld8 r19=[r17]				// read L3 PTE again and see if same
+	ld8 r19=[r17]				// read *pte again and see if same
 	mov r20=PAGE_SHIFT<<2			// setup page size for purge
 	;;
 	cmp.ne p7,p0=r18,r19
@@ -399,7 +429,7 @@ ENTRY(nested_dtlb_miss)
 	 *		r30:	continuation address
 	 *		r31:	saved pr
 	 *
-	 * Output:	r17:	physical address of L3 PTE of faulting address
+	 * Output:	r17:	physical address of PTE of faulting address
 	 *		r29:	saved b0
 	 *		r30:	continuation address
 	 *		r31:	saved pr
@@ -429,21 +459,33 @@ ENTRY(nested_dtlb_miss)
 (p6)	shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT
 (p7)	shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT-3
 	;;
-(p6)	dep r17=r18,r19,3,(PAGE_SHIFT-3)	// r17=PTA + IFA(33,42)*8
-(p7)	dep r17=r18,r17,3,(PAGE_SHIFT-6)	// r17=PTA + (((IFA(61,63) << 7) | IFA(33,39))*8)
+(p6)	dep r17=r18,r19,3,(PAGE_SHIFT-3)	// r17=pgd_offset for region 5
+(p7)	dep r17=r18,r17,3,(PAGE_SHIFT-6)	// r17=pgd_offset for region[0-4]
 	cmp.eq p7,p6=0,r21			// unused address bits all zeroes?
-	shr.u r18=r22,PMD_SHIFT			// shift L2 index into position
+#ifdef CONFIG_PGTABLE_4
+	shr.u r18=r22,PUD_SHIFT			// shift pud index into position
+#else
+	shr.u r18=r22,PMD_SHIFT			// shift pmd index into position
+#endif
 	;;
-	ld8 r17=[r17]				// fetch the L1 entry (may be 0)
+	ld8 r17=[r17]				// get *pgd (may be 0)
 	;;
-(p7)	cmp.eq p6,p7=r17,r0			// was L1 entry NULL?
-	dep r17=r18,r17,3,(PAGE_SHIFT-3)	// compute address of L2 page table entry
+(p7)	cmp.eq p6,p7=r17,r0			// was pgd_present(*pgd) == NULL?
+	dep r17=r18,r17,3,(PAGE_SHIFT-3)	// r17=p[u|m]d_offset(pgd,addr)
 	;;
-(p7)	ld8 r17=[r17]				// fetch the L2 entry (may be 0)
-	shr.u r19=r22,PAGE_SHIFT		// shift L3 index into position
+#ifdef CONFIG_PGTABLE_4
+(p7)	ld8 r17=[r17]				// get *pud (may be 0)
+	shr.u r18=r22,PMD_SHIFT			// shift pmd index into position
+	;;
+(p7)	cmp.eq.or.andcm p6,p7=r17,r0		// was pud_present(*pud) == NULL?
+	dep r17=r18,r17,3,(PAGE_SHIFT-3)	// r17=pmd_offset(pud,addr)
+	;;
+#endif
+(p7)	ld8 r17=[r17]				// get *pmd (may be 0)
+	shr.u r19=r22,PAGE_SHIFT		// shift pte index into position
 	;;
-(p7)	cmp.eq.or.andcm p6,p7=r17,r0		// was L2 entry NULL?
-	dep r17=r19,r17,3,(PAGE_SHIFT-3)	// compute address of L3 page table entry
+(p7)	cmp.eq.or.andcm p6,p7=r17,r0		// was pmd_present(*pmd) == NULL?
+	dep r17=r19,r17,3,(PAGE_SHIFT-3)	// r17=pte_offset(pmd,addr);
 (p6)	br.cond.spnt page_fault
 	mov b0=r30
 	br.sptk.many b0				// return to continuation point
diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c
index 471086b808a4..2895d6e6062f 100644
--- a/arch/ia64/kernel/kprobes.c
+++ b/arch/ia64/kernel/kprobes.c
@@ -26,7 +26,6 @@
 #include <linux/config.h>
 #include <linux/kprobes.h>
 #include <linux/ptrace.h>
-#include <linux/spinlock.h>
 #include <linux/string.h>
 #include <linux/slab.h>
 #include <linux/preempt.h>
@@ -38,13 +37,8 @@
 
 extern void jprobe_inst_return(void);
 
-/* kprobe_status settings */
-#define KPROBE_HIT_ACTIVE	0x00000001
-#define KPROBE_HIT_SS		0x00000002
-
-static struct kprobe *current_kprobe, *kprobe_prev;
-static unsigned long kprobe_status, kprobe_status_prev;
-static struct pt_regs jprobe_saved_regs;
+DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
+DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
 
 enum instruction_type {A, I, M, F, B, L, X, u};
 static enum instruction_type bundle_encoding[32][3] = {
@@ -313,21 +307,22 @@ static int __kprobes valid_kprobe_addr(int template, int slot,
 	return 0;
 }
 
-static inline void save_previous_kprobe(void)
+static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb)
 {
-	kprobe_prev = current_kprobe;
-	kprobe_status_prev = kprobe_status;
+	kcb->prev_kprobe.kp = kprobe_running();
+	kcb->prev_kprobe.status = kcb->kprobe_status;
 }
 
-static inline void restore_previous_kprobe(void)
+static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb)
 {
-	current_kprobe = kprobe_prev;
-	kprobe_status = kprobe_status_prev;
+	__get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp;
+	kcb->kprobe_status = kcb->prev_kprobe.status;
 }
 
-static inline void set_current_kprobe(struct kprobe *p)
+static inline void set_current_kprobe(struct kprobe *p,
+			struct kprobe_ctlblk *kcb)
 {
-	current_kprobe = p;
+	__get_cpu_var(current_kprobe) = p;
 }
 
 static void kretprobe_trampoline(void)
@@ -347,11 +342,12 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 	struct kretprobe_instance *ri = NULL;
 	struct hlist_head *head;
 	struct hlist_node *node, *tmp;
-	unsigned long orig_ret_address = 0;
+	unsigned long flags, orig_ret_address = 0;
 	unsigned long trampoline_address =
 		((struct fnptr *)kretprobe_trampoline)->ip;
 
-        head = kretprobe_inst_table_head(current);
+	spin_lock_irqsave(&kretprobe_lock, flags);
+	head = kretprobe_inst_table_head(current);
 
 	/*
 	 * It is possible to have multiple instances associated with a given
@@ -367,9 +363,9 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 	 *       kretprobe_trampoline
 	 */
 	hlist_for_each_entry_safe(ri, node, tmp, head, hlist) {
-                if (ri->task != current)
+		if (ri->task != current)
 			/* another task is sharing our hash bucket */
-                        continue;
+			continue;
 
 		if (ri->rp && ri->rp->handler)
 			ri->rp->handler(ri, regs);
@@ -389,17 +385,19 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 	BUG_ON(!orig_ret_address || (orig_ret_address == trampoline_address));
 	regs->cr_iip = orig_ret_address;
 
-	unlock_kprobes();
+	reset_current_kprobe();
+	spin_unlock_irqrestore(&kretprobe_lock, flags);
 	preempt_enable_no_resched();
 
-        /*
-         * By returning a non-zero value, we are telling
-         * kprobe_handler() that we have handled unlocking
-         * and re-enabling preemption.
-         */
-        return 1;
+	/*
+	 * By returning a non-zero value, we are telling
+	 * kprobe_handler() that we don't want the post_handler
+	 * to run (and have re-enabled preemption)
+	 */
+	return 1;
 }
 
+/* Called with kretprobe_lock held */
 void __kprobes arch_prepare_kretprobe(struct kretprobe *rp,
 				      struct pt_regs *regs)
 {
@@ -606,17 +604,22 @@ static int __kprobes pre_kprobes_handler(struct die_args *args)
 	int ret = 0;
 	struct pt_regs *regs = args->regs;
 	kprobe_opcode_t *addr = (kprobe_opcode_t *)instruction_pointer(regs);
+	struct kprobe_ctlblk *kcb;
 
+	/*
+	 * We don't want to be preempted for the entire
+	 * duration of kprobe processing
+	 */
 	preempt_disable();
+	kcb = get_kprobe_ctlblk();
 
 	/* Handle recursion cases */
 	if (kprobe_running()) {
 		p = get_kprobe(addr);
 		if (p) {
-			if ( (kprobe_status == KPROBE_HIT_SS) &&
+			if ((kcb->kprobe_status == KPROBE_HIT_SS) &&
 	 		     (p->ainsn.inst_flag == INST_FLAG_BREAK_INST)) {
   				ia64_psr(regs)->ss = 0;
-				unlock_kprobes();
 				goto no_kprobe;
 			}
 			/* We have reentered the pre_kprobe_handler(), since
@@ -625,17 +628,17 @@ static int __kprobes pre_kprobes_handler(struct die_args *args)
 			 * just single step on the instruction of the new probe
 			 * without calling any user handlers.
 			 */
-			save_previous_kprobe();
-			set_current_kprobe(p);
+			save_previous_kprobe(kcb);
+			set_current_kprobe(p, kcb);
 			p->nmissed++;
 			prepare_ss(p, regs);
-			kprobe_status = KPROBE_REENTER;
+			kcb->kprobe_status = KPROBE_REENTER;
 			return 1;
 		} else if (args->err == __IA64_BREAK_JPROBE) {
 			/*
 			 * jprobe instrumented function just completed
 			 */
-			p = current_kprobe;
+			p = __get_cpu_var(current_kprobe);
 			if (p->break_handler && p->break_handler(p, regs)) {
 				goto ss_probe;
 			}
@@ -645,10 +648,8 @@ static int __kprobes pre_kprobes_handler(struct die_args *args)
 		}
 	}
 
-	lock_kprobes();
 	p = get_kprobe(addr);
 	if (!p) {
-		unlock_kprobes();
 		if (!is_ia64_break_inst(regs)) {
 			/*
 			 * The breakpoint instruction was removed right
@@ -665,8 +666,8 @@ static int __kprobes pre_kprobes_handler(struct die_args *args)
 		goto no_kprobe;
 	}
 
-	kprobe_status = KPROBE_HIT_ACTIVE;
-	set_current_kprobe(p);
+	set_current_kprobe(p, kcb);
+	kcb->kprobe_status = KPROBE_HIT_ACTIVE;
 
 	if (p->pre_handler && p->pre_handler(p, regs))
 		/*
@@ -678,7 +679,7 @@ static int __kprobes pre_kprobes_handler(struct die_args *args)
 
 ss_probe:
 	prepare_ss(p, regs);
-	kprobe_status = KPROBE_HIT_SS;
+	kcb->kprobe_status = KPROBE_HIT_SS;
 	return 1;
 
 no_kprobe:
@@ -688,23 +689,25 @@ no_kprobe:
 
 static int __kprobes post_kprobes_handler(struct pt_regs *regs)
 {
-	if (!kprobe_running())
+	struct kprobe *cur = kprobe_running();
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	if (!cur)
 		return 0;
 
-	if ((kprobe_status != KPROBE_REENTER) && current_kprobe->post_handler) {
-		kprobe_status = KPROBE_HIT_SSDONE;
-		current_kprobe->post_handler(current_kprobe, regs, 0);
+	if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) {
+		kcb->kprobe_status = KPROBE_HIT_SSDONE;
+		cur->post_handler(cur, regs, 0);
 	}
 
-	resume_execution(current_kprobe, regs);
+	resume_execution(cur, regs);
 
 	/*Restore back the original saved kprobes variables and continue. */
-	if (kprobe_status == KPROBE_REENTER) {
-		restore_previous_kprobe();
+	if (kcb->kprobe_status == KPROBE_REENTER) {
+		restore_previous_kprobe(kcb);
 		goto out;
 	}
-
-	unlock_kprobes();
+	reset_current_kprobe();
 
 out:
 	preempt_enable_no_resched();
@@ -713,16 +716,15 @@ out:
 
 static int __kprobes kprobes_fault_handler(struct pt_regs *regs, int trapnr)
 {
-	if (!kprobe_running())
-		return 0;
+	struct kprobe *cur = kprobe_running();
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
 
-	if (current_kprobe->fault_handler &&
-	    current_kprobe->fault_handler(current_kprobe, regs, trapnr))
+	if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr))
 		return 1;
 
-	if (kprobe_status & KPROBE_HIT_SS) {
-		resume_execution(current_kprobe, regs);
-		unlock_kprobes();
+	if (kcb->kprobe_status & KPROBE_HIT_SS) {
+		resume_execution(cur, regs);
+		reset_current_kprobe();
 		preempt_enable_no_resched();
 	}
 
@@ -733,31 +735,42 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
 				       unsigned long val, void *data)
 {
 	struct die_args *args = (struct die_args *)data;
+	int ret = NOTIFY_DONE;
+
 	switch(val) {
 	case DIE_BREAK:
-		if (pre_kprobes_handler(args))
-			return NOTIFY_STOP;
+		/* err is break number from ia64_bad_break() */
+		if (args->err == 0x80200 || args->err == 0x80300 || args->err == 0)
+			if (pre_kprobes_handler(args))
+				ret = NOTIFY_STOP;
 		break;
-	case DIE_SS:
-		if (post_kprobes_handler(args->regs))
-			return NOTIFY_STOP;
+	case DIE_FAULT:
+		/* err is vector number from ia64_fault() */
+		if (args->err == 36)
+			if (post_kprobes_handler(args->regs))
+				ret = NOTIFY_STOP;
 		break;
 	case DIE_PAGE_FAULT:
-		if (kprobes_fault_handler(args->regs, args->trapnr))
-			return NOTIFY_STOP;
+		/* kprobe_running() needs smp_processor_id() */
+		preempt_disable();
+		if (kprobe_running() &&
+			kprobes_fault_handler(args->regs, args->trapnr))
+			ret = NOTIFY_STOP;
+		preempt_enable();
 	default:
 		break;
 	}
-	return NOTIFY_DONE;
+	return ret;
 }
 
 int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
 {
 	struct jprobe *jp = container_of(p, struct jprobe, kp);
 	unsigned long addr = ((struct fnptr *)(jp->entry))->ip;
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
 
 	/* save architectural state */
-	jprobe_saved_regs = *regs;
+	kcb->jprobe_saved_regs = *regs;
 
 	/* after rfi, execute the jprobe instrumented function */
 	regs->cr_iip = addr & ~0xFULL;
@@ -775,7 +788,10 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
 
 int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
 {
-	*regs = jprobe_saved_regs;
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	*regs = kcb->jprobe_saved_regs;
+	preempt_enable_no_resched();
 	return 1;
 }
 
diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index 6dc726ad7137..355af15287c7 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -51,6 +51,9 @@
  *
  * 2005-08-12 Keith Owens <kaos@sgi.com>
  *	      Convert MCA/INIT handlers to use per event stacks and SAL/OS state.
+ *
+ * 2005-10-07 Keith Owens <kaos@sgi.com>
+ *	      Add notify_die() hooks.
  */
 #include <linux/config.h>
 #include <linux/types.h>
@@ -58,7 +61,6 @@
 #include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/kallsyms.h>
 #include <linux/smp_lock.h>
 #include <linux/bootmem.h>
 #include <linux/acpi.h>
@@ -69,6 +71,7 @@
 #include <linux/workqueue.h>
 
 #include <asm/delay.h>
+#include <asm/kdebug.h>
 #include <asm/machvec.h>
 #include <asm/meminit.h>
 #include <asm/page.h>
@@ -132,6 +135,14 @@ extern void salinfo_log_wakeup(int type, u8 *buffer, u64 size, int irqsafe);
 
 static int mca_init;
 
+
+static void inline
+ia64_mca_spin(const char *func)
+{
+	printk(KERN_EMERG "%s: spinning here, not returning to SAL\n", func);
+	while (1)
+		cpu_relax();
+}
 /*
  * IA64_MCA log support
  */
@@ -508,9 +519,7 @@ ia64_mca_wakeup_all(void)
 	int cpu;
 
 	/* Clear the Rendez checkin flag for all cpus */
-	for(cpu = 0; cpu < NR_CPUS; cpu++) {
-		if (!cpu_online(cpu))
-			continue;
+	for_each_online_cpu(cpu) {
 		if (ia64_mc_info.imi_rendez_checkin[cpu] == IA64_MCA_RENDEZ_CHECKIN_DONE)
 			ia64_mca_wakeup(cpu);
 	}
@@ -528,13 +537,16 @@ ia64_mca_wakeup_all(void)
  *  Outputs :   None
  */
 static irqreturn_t
-ia64_mca_rendez_int_handler(int rendez_irq, void *arg, struct pt_regs *ptregs)
+ia64_mca_rendez_int_handler(int rendez_irq, void *arg, struct pt_regs *regs)
 {
 	unsigned long flags;
 	int cpu = smp_processor_id();
 
 	/* Mask all interrupts */
 	local_irq_save(flags);
+	if (notify_die(DIE_MCA_RENDZVOUS_ENTER, "MCA", regs, 0, 0, 0)
+			== NOTIFY_STOP)
+		ia64_mca_spin(__FUNCTION__);
 
 	ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_DONE;
 	/* Register with the SAL monarch that the slave has
@@ -542,10 +554,18 @@ ia64_mca_rendez_int_handler(int rendez_irq, void *arg, struct pt_regs *ptregs)
 	 */
 	ia64_sal_mc_rendez();
 
+	if (notify_die(DIE_MCA_RENDZVOUS_PROCESS, "MCA", regs, 0, 0, 0)
+			== NOTIFY_STOP)
+		ia64_mca_spin(__FUNCTION__);
+
 	/* Wait for the monarch cpu to exit. */
 	while (monarch_cpu != -1)
 	       cpu_relax();	/* spin until monarch leaves */
 
+	if (notify_die(DIE_MCA_RENDZVOUS_LEAVE, "MCA", regs, 0, 0, 0)
+			== NOTIFY_STOP)
+		ia64_mca_spin(__FUNCTION__);
+
 	/* Enable all interrupts */
 	local_irq_restore(flags);
 	return IRQ_HANDLED;
@@ -935,6 +955,9 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw,
 	oops_in_progress = 1;	/* FIXME: make printk NMI/MCA/INIT safe */
 	previous_current = ia64_mca_modify_original_stack(regs, sw, sos, "MCA");
 	monarch_cpu = cpu;
+	if (notify_die(DIE_MCA_MONARCH_ENTER, "MCA", regs, 0, 0, 0)
+			== NOTIFY_STOP)
+		ia64_mca_spin(__FUNCTION__);
 	ia64_wait_for_slaves(cpu);
 
 	/* Wakeup all the processors which are spinning in the rendezvous loop.
@@ -944,6 +967,9 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw,
 	 * spinning in SAL does not work.
 	 */
 	ia64_mca_wakeup_all();
+	if (notify_die(DIE_MCA_MONARCH_PROCESS, "MCA", regs, 0, 0, 0)
+			== NOTIFY_STOP)
+		ia64_mca_spin(__FUNCTION__);
 
 	/* Get the MCA error record and log it */
 	ia64_mca_log_sal_error_record(SAL_INFO_TYPE_MCA);
@@ -962,6 +988,9 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw,
 		ia64_sal_clear_state_info(SAL_INFO_TYPE_MCA);
 		sos->os_status = IA64_MCA_CORRECTED;
 	}
+	if (notify_die(DIE_MCA_MONARCH_LEAVE, "MCA", regs, 0, 0, recover)
+			== NOTIFY_STOP)
+		ia64_mca_spin(__FUNCTION__);
 
 	set_curr_task(cpu, previous_current);
 	monarch_cpu = -1;
@@ -1016,6 +1045,11 @@ ia64_mca_cmc_int_handler(int cmc_irq, void *arg, struct pt_regs *ptregs)
 
 			cmc_polling_enabled = 1;
 			spin_unlock(&cmc_history_lock);
+			/* If we're being hit with CMC interrupts, we won't
+			 * ever execute the schedule_work() below.  Need to
+			 * disable CMC interrupts on this processor now.
+			 */
+			ia64_mca_cmc_vector_disable(NULL);
 			schedule_work(&cmc_disable_work);
 
 			/*
@@ -1185,6 +1219,37 @@ ia64_mca_cpe_poll (unsigned long dummy)
 
 #endif /* CONFIG_ACPI */
 
+static int
+default_monarch_init_process(struct notifier_block *self, unsigned long val, void *data)
+{
+	int c;
+	struct task_struct *g, *t;
+	if (val != DIE_INIT_MONARCH_PROCESS)
+		return NOTIFY_DONE;
+	printk(KERN_ERR "Processes interrupted by INIT -");
+	for_each_online_cpu(c) {
+		struct ia64_sal_os_state *s;
+		t = __va(__per_cpu_mca[c] + IA64_MCA_CPU_INIT_STACK_OFFSET);
+		s = (struct ia64_sal_os_state *)((char *)t + MCA_SOS_OFFSET);
+		g = s->prev_task;
+		if (g) {
+			if (g->pid)
+				printk(" %d", g->pid);
+			else
+				printk(" %d (cpu %d task 0x%p)", g->pid, task_cpu(g), g);
+		}
+	}
+	printk("\n\n");
+	if (read_trylock(&tasklist_lock)) {
+		do_each_thread (g, t) {
+			printk("\nBacktrace of pid %d (%s)\n", t->pid, t->comm);
+			show_stack(t, NULL);
+		} while_each_thread (g, t);
+		read_unlock(&tasklist_lock);
+	}
+	return NOTIFY_DONE;
+}
+
 /*
  * C portion of the OS INIT handler
  *
@@ -1209,8 +1274,7 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw,
 	static atomic_t slaves;
 	static atomic_t monarchs;
 	task_t *previous_current;
-	int cpu = smp_processor_id(), c;
-	struct task_struct *g, *t;
+	int cpu = smp_processor_id();
 
 	oops_in_progress = 1;	/* FIXME: make printk NMI/MCA/INIT safe */
 	console_loglevel = 15;	/* make sure printks make it to console */
@@ -1250,8 +1314,17 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw,
 		ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_INIT;
 		while (monarch_cpu == -1)
 		       cpu_relax();	/* spin until monarch enters */
+		if (notify_die(DIE_INIT_SLAVE_ENTER, "INIT", regs, 0, 0, 0)
+				== NOTIFY_STOP)
+			ia64_mca_spin(__FUNCTION__);
+		if (notify_die(DIE_INIT_SLAVE_PROCESS, "INIT", regs, 0, 0, 0)
+				== NOTIFY_STOP)
+			ia64_mca_spin(__FUNCTION__);
 		while (monarch_cpu != -1)
 		       cpu_relax();	/* spin until monarch leaves */
+		if (notify_die(DIE_INIT_SLAVE_LEAVE, "INIT", regs, 0, 0, 0)
+				== NOTIFY_STOP)
+			ia64_mca_spin(__FUNCTION__);
 		printk("Slave on cpu %d returning to normal service.\n", cpu);
 		set_curr_task(cpu, previous_current);
 		ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_NOTDONE;
@@ -1260,6 +1333,9 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw,
 	}
 
 	monarch_cpu = cpu;
+	if (notify_die(DIE_INIT_MONARCH_ENTER, "INIT", regs, 0, 0, 0)
+			== NOTIFY_STOP)
+		ia64_mca_spin(__FUNCTION__);
 
 	/*
 	 * Wait for a bit.  On some machines (e.g., HP's zx2000 and zx6000, INIT can be
@@ -1270,27 +1346,16 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw,
 	printk("Delaying for 5 seconds...\n");
 	udelay(5*1000000);
 	ia64_wait_for_slaves(cpu);
-	printk(KERN_ERR "Processes interrupted by INIT -");
-	for_each_online_cpu(c) {
-		struct ia64_sal_os_state *s;
-		t = __va(__per_cpu_mca[c] + IA64_MCA_CPU_INIT_STACK_OFFSET);
-		s = (struct ia64_sal_os_state *)((char *)t + MCA_SOS_OFFSET);
-		g = s->prev_task;
-		if (g) {
-			if (g->pid)
-				printk(" %d", g->pid);
-			else
-				printk(" %d (cpu %d task 0x%p)", g->pid, task_cpu(g), g);
-		}
-	}
-	printk("\n\n");
-	if (read_trylock(&tasklist_lock)) {
-		do_each_thread (g, t) {
-			printk("\nBacktrace of pid %d (%s)\n", t->pid, t->comm);
-			show_stack(t, NULL);
-		} while_each_thread (g, t);
-		read_unlock(&tasklist_lock);
-	}
+	/* If nobody intercepts DIE_INIT_MONARCH_PROCESS then we drop through
+	 * to default_monarch_init_process() above and just print all the
+	 * tasks.
+	 */
+	if (notify_die(DIE_INIT_MONARCH_PROCESS, "INIT", regs, 0, 0, 0)
+			== NOTIFY_STOP)
+		ia64_mca_spin(__FUNCTION__);
+	if (notify_die(DIE_INIT_MONARCH_LEAVE, "INIT", regs, 0, 0, 0)
+			== NOTIFY_STOP)
+		ia64_mca_spin(__FUNCTION__);
 	printk("\nINIT dump complete.  Monarch on cpu %d returning to normal service.\n", cpu);
 	atomic_dec(&monarchs);
 	set_curr_task(cpu, previous_current);
@@ -1459,6 +1524,10 @@ ia64_mca_init(void)
 	s64 rc;
 	struct ia64_sal_retval isrv;
 	u64 timeout = IA64_MCA_RENDEZ_TIMEOUT;	/* platform specific */
+	static struct notifier_block default_init_monarch_nb = {
+		.notifier_call = default_monarch_init_process,
+		.priority = 0/* we need to notified last */
+	};
 
 	IA64_MCA_DEBUG("%s: begin\n", __FUNCTION__);
 
@@ -1552,6 +1621,10 @@ ia64_mca_init(void)
 		       "(status %ld)\n", rc);
 		return;
 	}
+	if (register_die_notifier(&default_init_monarch_nb)) {
+		printk(KERN_ERR "Failed to register default monarch INIT process\n");
+		return;
+	}
 
 	IA64_MCA_DEBUG("%s: registered OS INIT handler with SAL\n", __FUNCTION__);
 
diff --git a/arch/ia64/kernel/mca_asm.S b/arch/ia64/kernel/mca_asm.S
index 499a065f4e60..db32fc1d3935 100644
--- a/arch/ia64/kernel/mca_asm.S
+++ b/arch/ia64/kernel/mca_asm.S
@@ -489,24 +489,27 @@ ia64_state_save:
 	;;
 	st8 [temp1]=r17,16	// pal_min_state
 	st8 [temp2]=r6,16	// prev_IA64_KR_CURRENT
+	mov r6=IA64_KR(CURRENT_STACK)
+	;;
+	st8 [temp1]=r6,16	// prev_IA64_KR_CURRENT_STACK
+	st8 [temp2]=r0,16	// prev_task, starts off as NULL
 	mov r6=cr.ifa
 	;;
-	st8 [temp1]=r0,16	// prev_task, starts off as NULL
-	st8 [temp2]=r12,16	// cr.isr
+	st8 [temp1]=r12,16	// cr.isr
+	st8 [temp2]=r6,16	// cr.ifa
 	mov r12=cr.itir
 	;;
-	st8 [temp1]=r6,16	// cr.ifa
-	st8 [temp2]=r12,16	// cr.itir
+	st8 [temp1]=r12,16	// cr.itir
+	st8 [temp2]=r11,16	// cr.iipa
 	mov r12=cr.iim
 	;;
-	st8 [temp1]=r11,16	// cr.iipa
-	st8 [temp2]=r12,16	// cr.iim
-	mov r6=cr.iha
+	st8 [temp1]=r12,16	// cr.iim
 (p1)	mov r12=IA64_MCA_COLD_BOOT
 (p2)	mov r12=IA64_INIT_WARM_BOOT
+	mov r6=cr.iha
 	;;
-	st8 [temp1]=r6,16	// cr.iha
-	st8 [temp2]=r12		// os_status, default is cold boot
+	st8 [temp2]=r6,16	// cr.iha
+	st8 [temp1]=r12		// os_status, default is cold boot
 	mov r6=IA64_MCA_SAME_CONTEXT
 	;;
 	st8 [temp1]=r6		// context, default is same context
@@ -823,9 +826,12 @@ ia64_state_restore:
 	ld8 r12=[temp1],16	// sal_ra
 	ld8 r9=[temp2],16	// sal_gp
 	;;
-	ld8 r22=[temp1],24	// pal_min_state, virtual.  skip prev_task
+	ld8 r22=[temp1],16	// pal_min_state, virtual
 	ld8 r21=[temp2],16	// prev_IA64_KR_CURRENT
 	;;
+	ld8 r16=[temp1],16	// prev_IA64_KR_CURRENT_STACK
+	ld8 r20=[temp2],16	// prev_task
+	;;
 	ld8 temp3=[temp1],16	// cr.isr
 	ld8 temp4=[temp2],16	// cr.ifa
 	;;
@@ -846,6 +852,45 @@ ia64_state_restore:
 	ld8 r8=[temp1]		// os_status
 	ld8 r10=[temp2]		// context
 
+	/* Wire IA64_TR_CURRENT_STACK to the stack that we are resuming to.  To
+	 * avoid any dependencies on the algorithm in ia64_switch_to(), just
+	 * purge any existing CURRENT_STACK mapping and insert the new one.
+	 *
+	 * r16 contains prev_IA64_KR_CURRENT_STACK, r21 contains
+	 * prev_IA64_KR_CURRENT, these values may have been changed by the C
+	 * code.  Do not use r8, r9, r10, r22, they contain values ready for
+	 * the return to SAL.
+	 */
+
+	mov r15=IA64_KR(CURRENT_STACK)		// physical granule mapped by IA64_TR_CURRENT_STACK
+	;;
+	shl r15=r15,IA64_GRANULE_SHIFT
+	;;
+	dep r15=-1,r15,61,3			// virtual granule
+	mov r18=IA64_GRANULE_SHIFT<<2		// for cr.itir.ps
+	;;
+	ptr.d r15,r18
+	;;
+	srlz.d
+
+	extr.u r19=r21,61,3			// r21 = prev_IA64_KR_CURRENT
+	shl r20=r16,IA64_GRANULE_SHIFT		// r16 = prev_IA64_KR_CURRENT_STACK
+	movl r21=PAGE_KERNEL			// page properties
+	;;
+	mov IA64_KR(CURRENT_STACK)=r16
+	cmp.ne p6,p0=RGN_KERNEL,r19		// new stack is in the kernel region?
+	or r21=r20,r21				// construct PA | page properties
+(p6)	br.spnt 1f				// the dreaded cpu 0 idle task in region 5:(
+	;;
+	mov cr.itir=r18
+	mov cr.ifa=r21
+	mov r20=IA64_TR_CURRENT_STACK
+	;;
+	itr.d dtr[r20]=r21
+	;;
+	srlz.d
+1:
+
 	br.sptk b0
 
 //EndStub//////////////////////////////////////////////////////////////////////
@@ -982,6 +1027,7 @@ ia64_set_kernel_registers:
 	add temp4=temp4, temp1	// &struct ia64_sal_os_state.os_gp
 	add r12=temp1, temp3	// kernel stack pointer on MCA/INIT stack
 	add r13=temp1, r3	// set current to start of MCA/INIT stack
+	add r20=temp1, r3	// physical start of MCA/INIT stack
 	;;
 	ld8 r1=[temp4]		// OS GP from SAL OS state
 	;;
@@ -991,7 +1037,35 @@ ia64_set_kernel_registers:
 	;;
 	mov IA64_KR(CURRENT)=r13
 
-	// FIXME: do I need to wire IA64_KR_CURRENT_STACK and IA64_TR_CURRENT_STACK?
+	/* Wire IA64_TR_CURRENT_STACK to the MCA/INIT handler stack.  To avoid
+	 * any dependencies on the algorithm in ia64_switch_to(), just purge
+	 * any existing CURRENT_STACK mapping and insert the new one.
+	 */
+
+	mov r16=IA64_KR(CURRENT_STACK)		// physical granule mapped by IA64_TR_CURRENT_STACK
+	;;
+	shl r16=r16,IA64_GRANULE_SHIFT
+	;;
+	dep r16=-1,r16,61,3			// virtual granule
+	mov r18=IA64_GRANULE_SHIFT<<2		// for cr.itir.ps
+	;;
+	ptr.d r16,r18
+	;;
+	srlz.d
+
+	shr.u r16=r20,IA64_GRANULE_SHIFT	// r20 = physical start of MCA/INIT stack
+	movl r21=PAGE_KERNEL			// page properties
+	;;
+	mov IA64_KR(CURRENT_STACK)=r16
+	or r21=r20,r21				// construct PA | page properties
+	;;
+	mov cr.itir=r18
+	mov cr.ifa=r13
+	mov r20=IA64_TR_CURRENT_STACK
+	;;
+	itr.d dtr[r20]=r21
+	;;
+	srlz.d
 
 	br.sptk b0
 
diff --git a/arch/ia64/kernel/mca_drv.c b/arch/ia64/kernel/mca_drv.c
index 80f83d6cdbfc..3492e3211a44 100644
--- a/arch/ia64/kernel/mca_drv.c
+++ b/arch/ia64/kernel/mca_drv.c
@@ -56,8 +56,9 @@ static struct page *page_isolate[MAX_PAGE_ISOLATE];
 static int num_page_isolate = 0;
 
 typedef enum {
-	ISOLATE_NG = 0,
-	ISOLATE_OK = 1
+	ISOLATE_NG,
+	ISOLATE_OK,
+	ISOLATE_NONE
 } isolate_status_t;
 
 /*
@@ -74,7 +75,7 @@ static struct {
  * @paddr:	poisoned memory location
  *
  * Return value:
- *	ISOLATE_OK / ISOLATE_NG
+ *	one of isolate_status_t, ISOLATE_OK/NG/NONE.
  */
 
 static isolate_status_t
@@ -85,7 +86,10 @@ mca_page_isolate(unsigned long paddr)
 
 	/* whether physical address is valid or not */
 	if (!ia64_phys_addr_valid(paddr))
-		return ISOLATE_NG;
+		return ISOLATE_NONE;
+
+	if (!pfn_valid(paddr >> PAGE_SHIFT))
+		return ISOLATE_NONE;
 
 	/* convert physical address to physical page number */
 	p = pfn_to_page(paddr>>PAGE_SHIFT);
@@ -104,6 +108,7 @@ mca_page_isolate(unsigned long paddr)
 		return ISOLATE_NG;
 
 	/* add attribute 'Reserved' and register the page */
+	get_page(p);
 	SetPageReserved(p);
 	page_isolate[num_page_isolate++] = p;
 
@@ -122,10 +127,15 @@ mca_handler_bh(unsigned long paddr)
 		current->pid, current->comm);
 
 	spin_lock(&mca_bh_lock);
-	if (mca_page_isolate(paddr) == ISOLATE_OK) {
+	switch (mca_page_isolate(paddr)) {
+	case ISOLATE_OK:
 		printk(KERN_DEBUG "Page isolation: ( %lx ) success.\n", paddr);
-	} else {
+		break;
+	case ISOLATE_NG:
 		printk(KERN_DEBUG "Page isolation: ( %lx ) failure.\n", paddr);
+		break;
+	default:
+		break;
 	}
 	spin_unlock(&mca_bh_lock);
 
@@ -537,9 +547,20 @@ recover_from_processor_error(int platform, slidx_table_t *slidx,
 		(pal_processor_state_info_t*)peidx_psp(peidx);
 
 	/*
-	 * We cannot recover errors with other than bus_check.
+	 * Processor recovery status must key off of the PAL recovery
+	 * status in the Processor State Parameter.
+	 */
+
+	/*
+	 * The machine check is corrected.
 	 */
-	if (psp->cc || psp->rc || psp->uc)
+	if (psp->cm == 1)
+		return 1;
+
+	/*
+	 * The error was not contained.  Software must be reset.
+	 */
+	if (psp->us || psp->ci == 0)
 		return 0;
 
 	/*
@@ -560,8 +581,6 @@ recover_from_processor_error(int platform, slidx_table_t *slidx,
 		return 0;
 	if (pbci->eb && pbci->bsi > 0)
 		return 0;
-	if (psp->ci == 0)
-		return 0;
 
 	/*
 	 * This is a local MCA and estimated as recoverble external bus error.
diff --git a/arch/ia64/kernel/module.c b/arch/ia64/kernel/module.c
index f1aca7cffd12..7a2f0a798d12 100644
--- a/arch/ia64/kernel/module.c
+++ b/arch/ia64/kernel/module.c
@@ -947,8 +947,8 @@ void
 percpu_modcopy (void *pcpudst, const void *src, unsigned long size)
 {
 	unsigned int i;
-	for (i = 0; i < NR_CPUS; i++)
-		if (cpu_possible(i))
-			memcpy(pcpudst + __per_cpu_offset[i], src, size);
+	for_each_cpu(i) {
+		memcpy(pcpudst + __per_cpu_offset[i], src, size);
+	}
 }
 #endif /* CONFIG_SMP */
diff --git a/arch/ia64/kernel/patch.c b/arch/ia64/kernel/patch.c
index 367804a605fa..6a4ac7d70b35 100644
--- a/arch/ia64/kernel/patch.c
+++ b/arch/ia64/kernel/patch.c
@@ -64,22 +64,30 @@ ia64_patch (u64 insn_addr, u64 mask, u64 val)
 void
 ia64_patch_imm64 (u64 insn_addr, u64 val)
 {
-	ia64_patch(insn_addr,
+	/* The assembler may generate offset pointing to either slot 1
+	   or slot 2 for a long (2-slot) instruction, occupying slots 1
+	   and 2.  */
+  	insn_addr &= -16UL;
+	ia64_patch(insn_addr + 2,
 		   0x01fffefe000UL, (  ((val & 0x8000000000000000UL) >> 27) /* bit 63 -> 36 */
 				     | ((val & 0x0000000000200000UL) <<  0) /* bit 21 -> 21 */
 				     | ((val & 0x00000000001f0000UL) <<  6) /* bit 16 -> 22 */
 				     | ((val & 0x000000000000ff80UL) << 20) /* bit  7 -> 27 */
 				     | ((val & 0x000000000000007fUL) << 13) /* bit  0 -> 13 */));
-	ia64_patch(insn_addr - 1, 0x1ffffffffffUL, val >> 22);
+	ia64_patch(insn_addr + 1, 0x1ffffffffffUL, val >> 22);
 }
 
 void
 ia64_patch_imm60 (u64 insn_addr, u64 val)
 {
-	ia64_patch(insn_addr,
+	/* The assembler may generate offset pointing to either slot 1
+	   or slot 2 for a long (2-slot) instruction, occupying slots 1
+	   and 2.  */
+  	insn_addr &= -16UL;
+	ia64_patch(insn_addr + 2,
 		   0x011ffffe000UL, (  ((val & 0x0800000000000000UL) >> 23) /* bit 59 -> 36 */
 				     | ((val & 0x00000000000fffffUL) << 13) /* bit  0 -> 13 */));
-	ia64_patch(insn_addr - 1, 0x1fffffffffcUL, val >> 18);
+	ia64_patch(insn_addr + 1, 0x1fffffffffcUL, val >> 18);
 }
 
 /*
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index d71731ee5b61..410d4804fa6e 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -2352,7 +2352,8 @@ pfm_smpl_buffer_alloc(struct task_struct *task, pfm_context_t *ctx, unsigned lon
 	insert_vm_struct(mm, vma);
 
 	mm->total_vm  += size >> PAGE_SHIFT;
-	vm_stat_account(vma);
+	vm_stat_account(vma->vm_mm, vma->vm_flags, vma->vm_file,
+							vma_pages(vma));
 	up_write(&task->mm->mmap_sem);
 
 	/*
@@ -4939,7 +4940,7 @@ abort_locked:
 	if (call_made && PFM_CMD_RW_ARG(cmd) && copy_to_user(arg, args_k, base_sz*count)) ret = -EFAULT;
 
 error_args:
-	if (args_k) kfree(args_k);
+	kfree(args_k);
 
 	DPRINT(("cmd=%s ret=%ld\n", PFM_CMD_NAME(cmd), ret));
 
diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c
index 051e050359e4..2e33665d9c18 100644
--- a/arch/ia64/kernel/process.c
+++ b/arch/ia64/kernel/process.c
@@ -4,6 +4,9 @@
  * Copyright (C) 1998-2003 Hewlett-Packard Co
  *	David Mosberger-Tang <davidm@hpl.hp.com>
  * 04/11/17 Ashok Raj	<ashok.raj@intel.com> Added CPU Hotplug Support
+ *
+ * 2005-10-07 Keith Owens <kaos@sgi.com>
+ *	      Add notify_die() hooks.
  */
 #define __KERNEL_SYSCALLS__	/* see <asm/unistd.h> */
 #include <linux/config.h>
@@ -34,6 +37,7 @@
 #include <asm/elf.h>
 #include <asm/ia32.h>
 #include <asm/irq.h>
+#include <asm/kdebug.h>
 #include <asm/pgalloc.h>
 #include <asm/processor.h>
 #include <asm/sal.h>
@@ -197,11 +201,12 @@ void
 default_idle (void)
 {
 	local_irq_enable();
-	while (!need_resched())
+	while (!need_resched()) {
 		if (can_do_pal_halt)
 			safe_halt();
 		else
 			cpu_relax();
+	}
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
@@ -263,16 +268,20 @@ void __attribute__((noreturn))
 cpu_idle (void)
 {
 	void (*mark_idle)(int) = ia64_mark_idle;
+  	int cpu = smp_processor_id();
 
 	/* endless idle loop with no priority at all */
 	while (1) {
+		if (can_do_pal_halt)
+			clear_thread_flag(TIF_POLLING_NRFLAG);
+		else
+			set_thread_flag(TIF_POLLING_NRFLAG);
+
+		if (!need_resched()) {
+			void (*idle)(void);
 #ifdef CONFIG_SMP
-		if (!need_resched())
 			min_xtp();
 #endif
-		while (!need_resched()) {
-			void (*idle)(void);
-
 			if (__get_cpu_var(cpu_idle_state))
 				__get_cpu_var(cpu_idle_state) = 0;
 
@@ -284,17 +293,17 @@ cpu_idle (void)
 			if (!idle)
 				idle = default_idle;
 			(*idle)();
-		}
-
-		if (mark_idle)
-			(*mark_idle)(0);
-
+			if (mark_idle)
+				(*mark_idle)(0);
 #ifdef CONFIG_SMP
-		normal_xtp();
+			normal_xtp();
 #endif
+		}
+		preempt_enable_no_resched();
 		schedule();
+		preempt_disable();
 		check_pgt_cache();
-		if (cpu_is_offline(smp_processor_id()))
+		if (cpu_is_offline(cpu))
 			play_dead();
 	}
 }
@@ -709,13 +718,6 @@ kernel_thread_helper (int (*fn)(void *), void *arg)
 void
 flush_thread (void)
 {
-	/*
-	 * Remove function-return probe instances associated with this task
-	 * and put them back on the free list. Do not insert an exit probe for
-	 * this function, it will be disabled by kprobe_flush_task if you do.
-	 */
-	kprobe_flush_task(current);
-
 	/* drop floating-point and debug-register state if it exists: */
 	current->thread.flags &= ~(IA64_THREAD_FPH_VALID | IA64_THREAD_DBG_VALID);
 	ia64_drop_fpu(current);
@@ -804,12 +806,14 @@ cpu_halt (void)
 void
 machine_restart (char *restart_cmd)
 {
+	(void) notify_die(DIE_MACHINE_RESTART, restart_cmd, NULL, 0, 0, 0);
 	(*efi.reset_system)(EFI_RESET_WARM, 0, 0, NULL);
 }
 
 void
 machine_halt (void)
 {
+	(void) notify_die(DIE_MACHINE_HALT, "", NULL, 0, 0, 0);
 	cpu_halt();
 }
 
diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c
index bbb8bc7c0552..4b19d0410632 100644
--- a/arch/ia64/kernel/ptrace.c
+++ b/arch/ia64/kernel/ptrace.c
@@ -587,8 +587,9 @@ thread_matches (struct task_struct *thread, unsigned long addr)
 static struct task_struct *
 find_thread_for_addr (struct task_struct *child, unsigned long addr)
 {
-	struct task_struct *g, *p;
+	struct task_struct *p;
 	struct mm_struct *mm;
+	struct list_head *this, *next;
 	int mm_users;
 
 	if (!(mm = get_task_mm(child)))
@@ -600,28 +601,21 @@ find_thread_for_addr (struct task_struct *child, unsigned long addr)
 		goto out;		/* not multi-threaded */
 
 	/*
-	 * First, traverse the child's thread-list.  Good for scalability with
-	 * NPTL-threads.
+	 * Traverse the current process' children list.  Every task that
+	 * one attaches to becomes a child.  And it is only attached children
+	 * of the debugger that are of interest (ptrace_check_attach checks
+	 * for this).
 	 */
-	p = child;
-	do {
-		if (thread_matches(p, addr)) {
-			child = p;
-			goto out;
-		}
-		if (mm_users-- <= 1)
-			goto out;
-	} while ((p = next_thread(p)) != child);
-
-	do_each_thread(g, p) {
-		if (child->mm != mm)
+ 	list_for_each_safe(this, next, &current->children) {
+		p = list_entry(this, struct task_struct, sibling);
+		if (p->mm != mm)
 			continue;
-
 		if (thread_matches(p, addr)) {
 			child = p;
 			goto out;
 		}
-	} while_each_thread(g, p);
+	}
+
   out:
 	mmput(mm);
 	return child;
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index 1f5c26dbe705..5add0bcf87a7 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -78,7 +78,27 @@ struct screen_info screen_info;
 unsigned long vga_console_iobase;
 unsigned long vga_console_membase;
 
+static struct resource data_resource = {
+	.name	= "Kernel data",
+	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
+};
+
+static struct resource code_resource = {
+	.name	= "Kernel code",
+	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
+};
+extern void efi_initialize_iomem_resources(struct resource *,
+		struct resource *);
+extern char _text[], _end[], _etext[];
+
 unsigned long ia64_max_cacheline_size;
+
+int dma_get_cache_alignment(void)
+{
+        return ia64_max_cacheline_size;
+}
+EXPORT_SYMBOL(dma_get_cache_alignment);
+
 unsigned long ia64_iobase;	/* virtual address for I/O accesses */
 EXPORT_SYMBOL(ia64_iobase);
 struct io_space io_space[MAX_IO_SPACES];
@@ -171,6 +191,22 @@ sort_regions (struct rsvd_region *rsvd_region, int max)
 	}
 }
 
+/*
+ * Request address space for all standard resources
+ */
+static int __init register_memory(void)
+{
+	code_resource.start = ia64_tpa(_text);
+	code_resource.end   = ia64_tpa(_etext) - 1;
+	data_resource.start = ia64_tpa(_etext);
+	data_resource.end   = ia64_tpa(_end) - 1;
+	efi_initialize_iomem_resources(&code_resource, &data_resource);
+
+	return 0;
+}
+
+__initcall(register_memory);
+
 /**
  * reserve_memory - setup reserved memory areas
  *
@@ -211,6 +247,9 @@ reserve_memory (void)
 	}
 #endif
 
+	efi_memmap_init(&rsvd_region[n].start, &rsvd_region[n].end);
+	n++;
+
 	/* end of memory marker */
 	rsvd_region[n].start = ~0UL;
 	rsvd_region[n].end   = ~0UL;
@@ -244,28 +283,31 @@ find_initrd (void)
 static void __init
 io_port_init (void)
 {
-	extern unsigned long ia64_iobase;
 	unsigned long phys_iobase;
 
 	/*
-	 *  Set `iobase' to the appropriate address in region 6 (uncached access range).
+	 * Set `iobase' based on the EFI memory map or, failing that, the
+	 * value firmware left in ar.k0.
 	 *
-	 *  The EFI memory map is the "preferred" location to get the I/O port space base,
-	 *  rather the relying on AR.KR0. This should become more clear in future SAL
-	 *  specs. We'll fall back to getting it out of AR.KR0 if no appropriate entry is
-	 *  found in the memory map.
+	 * Note that in ia32 mode, IN/OUT instructions use ar.k0 to compute
+	 * the port's virtual address, so ia32_load_state() loads it with a
+	 * user virtual address.  But in ia64 mode, glibc uses the
+	 * *physical* address in ar.k0 to mmap the appropriate area from
+	 * /dev/mem, and the inX()/outX() interfaces use MMIO.  In both
+	 * cases, user-mode can only use the legacy 0-64K I/O port space.
+	 *
+	 * ar.k0 is not involved in kernel I/O port accesses, which can use
+	 * any of the I/O port spaces and are done via MMIO using the
+	 * virtual mmio_base from the appropriate io_space[].
 	 */
 	phys_iobase = efi_get_iobase();
-	if (phys_iobase)
-		/* set AR.KR0 since this is all we use it for anyway */
-		ia64_set_kr(IA64_KR_IO_BASE, phys_iobase);
-	else {
+	if (!phys_iobase) {
 		phys_iobase = ia64_get_kr(IA64_KR_IO_BASE);
-		printk(KERN_INFO "No I/O port range found in EFI memory map, falling back "
-		       "to AR.KR0\n");
-		printk(KERN_INFO "I/O port base = 0x%lx\n", phys_iobase);
+		printk(KERN_INFO "No I/O port range found in EFI memory map, "
+			"falling back to AR.KR0 (0x%lx)\n", phys_iobase);
 	}
 	ia64_iobase = (unsigned long) ioremap(phys_iobase, 0);
+	ia64_set_kr(IA64_KR_IO_BASE, __pa(ia64_iobase));
 
 	/* setup legacy IO port space */
 	io_space[0].mmio_base = ia64_iobase;
@@ -419,6 +461,7 @@ setup_arch (char **cmdline_p)
 #endif
 
 	cpu_init();	/* initialize the bootstrap CPU */
+	mmu_context_init();	/* initialize context_id bitmap */
 
 #ifdef CONFIG_ACPI
 	acpi_boot_init();
@@ -526,7 +569,7 @@ show_cpuinfo (struct seq_file *m, void *v)
 		   c->itc_freq / 1000000, c->itc_freq % 1000000,
 		   lpj*HZ/500000, (lpj*HZ/5000) % 100);
 #ifdef CONFIG_SMP
-	seq_printf(m, "siblings   : %u\n", c->num_log);
+	seq_printf(m, "siblings   : %u\n", cpus_weight(cpu_core_map[cpunum]));
 	if (c->threads_per_core > 1 || c->cores_per_socket > 1)
 		seq_printf(m,
 		   	   "physical id: %u\n"
diff --git a/arch/ia64/kernel/signal.c b/arch/ia64/kernel/signal.c
index 774f34b675cf..58ce07efc56e 100644
--- a/arch/ia64/kernel/signal.c
+++ b/arch/ia64/kernel/signal.c
@@ -387,15 +387,14 @@ setup_frame (int sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *set,
 	     struct sigscratch *scr)
 {
 	extern char __kernel_sigtramp[];
-	unsigned long tramp_addr, new_rbs = 0;
+	unsigned long tramp_addr, new_rbs = 0, new_sp;
 	struct sigframe __user *frame;
 	long err;
 
-	frame = (void __user *) scr->pt.r12;
+	new_sp = scr->pt.r12;
 	tramp_addr = (unsigned long) __kernel_sigtramp;
-	if ((ka->sa.sa_flags & SA_ONSTACK) && sas_ss_flags((unsigned long) frame) == 0) {
-		frame = (void __user *) ((current->sas_ss_sp + current->sas_ss_size)
-					 & ~(STACK_ALIGN - 1));
+	if ((ka->sa.sa_flags & SA_ONSTACK) && sas_ss_flags(new_sp) == 0) {
+		new_sp = current->sas_ss_sp + current->sas_ss_size;
 		/*
 		 * We need to check for the register stack being on the signal stack
 		 * separately, because it's switched separately (memory stack is switched
@@ -404,7 +403,7 @@ setup_frame (int sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *set,
 		if (!rbs_on_sig_stack(scr->pt.ar_bspstore))
 			new_rbs = (current->sas_ss_sp + sizeof(long) - 1) & ~(sizeof(long) - 1);
 	}
-	frame = (void __user *) frame - ((sizeof(*frame) + STACK_ALIGN - 1) & ~(STACK_ALIGN - 1));
+	frame = (void __user *) ((new_sp - sizeof(*frame)) & -STACK_ALIGN);
 
 	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
 		return force_sigsegv_info(sig, frame);
diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c
index 0166a9847095..657ac99a451c 100644
--- a/arch/ia64/kernel/smp.c
+++ b/arch/ia64/kernel/smp.c
@@ -185,8 +185,8 @@ send_IPI_allbutself (int op)
 {
 	unsigned int i;
 
-	for (i = 0; i < NR_CPUS; i++) {
-		if (cpu_online(i) && i != smp_processor_id())
+	for_each_online_cpu(i) {
+		if (i != smp_processor_id())
 			send_IPI_single(i, op);
 	}
 }
@@ -199,9 +199,9 @@ send_IPI_all (int op)
 {
 	int i;
 
-	for (i = 0; i < NR_CPUS; i++)
-		if (cpu_online(i))
-			send_IPI_single(i, op);
+	for_each_online_cpu(i) {
+		send_IPI_single(i, op);
+	}
 }
 
 /*
diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
index 7d72c0d872b3..8f44e7d2df66 100644
--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@@ -399,6 +399,7 @@ start_secondary (void *unused)
 	Dprintk("start_secondary: starting CPU 0x%x\n", hard_smp_processor_id());
 	efi_map_pal_code();
 	cpu_init();
+	preempt_disable();
 	smp_callin();
 
 	cpu_idle();
@@ -694,9 +695,9 @@ smp_cpus_done (unsigned int dummy)
 	 * Allow the user to impress friends.
 	 */
 
-	for (cpu = 0; cpu < NR_CPUS; cpu++)
-		if (cpu_online(cpu))
-			bogosum += cpu_data(cpu)->loops_per_jiffy;
+	for_each_online_cpu(cpu) {
+		bogosum += cpu_data(cpu)->loops_per_jiffy;
+	}
 
 	printk(KERN_INFO "Total of %d processors activated (%lu.%02lu BogoMIPS).\n",
 	       (int)num_online_cpus(), bogosum/(500000/HZ), (bogosum/(5000/HZ))%100);
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index 8b8a5a45b621..5b7e736f3b49 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -32,10 +32,6 @@
 
 extern unsigned long wall_jiffies;
 
-u64 jiffies_64 __cacheline_aligned_in_smp = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 #define TIME_KEEPER_ID	0	/* smp_processor_id() of time-keeper */
 
 #ifdef CONFIG_IA64_DEBUG_IRQ
diff --git a/arch/ia64/kernel/traps.c b/arch/ia64/kernel/traps.c
index f970359e7edf..d3e0ecb56d62 100644
--- a/arch/ia64/kernel/traps.c
+++ b/arch/ia64/kernel/traps.c
@@ -30,17 +30,20 @@ fpswa_interface_t *fpswa_interface;
 EXPORT_SYMBOL(fpswa_interface);
 
 struct notifier_block *ia64die_chain;
-static DEFINE_SPINLOCK(die_notifier_lock);
 
-int register_die_notifier(struct notifier_block *nb)
+int
+register_die_notifier(struct notifier_block *nb)
 {
-	int err = 0;
-	unsigned long flags;
-	spin_lock_irqsave(&die_notifier_lock, flags);
-	err = notifier_chain_register(&ia64die_chain, nb);
-	spin_unlock_irqrestore(&die_notifier_lock, flags);
-	return err;
+	return notifier_chain_register(&ia64die_chain, nb);
 }
+EXPORT_SYMBOL_GPL(register_die_notifier);
+
+int
+unregister_die_notifier(struct notifier_block *nb)
+{
+	return notifier_chain_unregister(&ia64die_chain, nb);
+}
+EXPORT_SYMBOL_GPL(unregister_die_notifier);
 
 void __init
 trap_init (void)
@@ -105,6 +108,7 @@ die (const char *str, struct pt_regs *regs, long err)
 	if (++die.lock_owner_depth < 3) {
 		printk("%s[%d]: %s %ld [%d]\n",
 			current->comm, current->pid, str, err, ++die_counter);
+		(void) notify_die(DIE_OOPS, (char *)str, regs, err, 255, SIGSEGV);
 		show_regs(regs);
   	} else
 		printk(KERN_ERR "Recursive die() failure, output suppressed\n");
@@ -128,24 +132,6 @@ __kprobes ia64_bad_break (unsigned long break_num, struct pt_regs *regs)
 	siginfo_t siginfo;
 	int sig, code;
 
-	/* break.b always sets cr.iim to 0, which causes problems for
-	 * debuggers.  Get the real break number from the original instruction,
-	 * but only for kernel code.  User space break.b is left alone, to
-	 * preserve the existing behaviour.  All break codings have the same
-	 * format, so there is no need to check the slot type.
-	 */
-	if (break_num == 0 && !user_mode(regs)) {
-		struct ia64_psr *ipsr = ia64_psr(regs);
-		unsigned long *bundle = (unsigned long *)regs->cr_iip;
-		unsigned long slot;
-		switch (ipsr->ri) {
-		      case 0:  slot = (bundle[0] >>  5); break;
-		      case 1:  slot = (bundle[0] >> 46) | (bundle[1] << 18); break;
-		      default: slot = (bundle[1] >> 23); break;
-		}
-		break_num = ((slot >> 36 & 1) << 20) | (slot >> 6 & 0xfffff);
-	}
-
 	/* SIGILL, SIGFPE, SIGSEGV, and SIGBUS want these field initialized: */
 	siginfo.si_addr = (void __user *) (regs->cr_iip + ia64_psr(regs)->ri);
 	siginfo.si_imm = break_num;
@@ -155,9 +141,8 @@ __kprobes ia64_bad_break (unsigned long break_num, struct pt_regs *regs)
 	switch (break_num) {
 	      case 0: /* unknown error (used by GCC for __builtin_abort()) */
 		if (notify_die(DIE_BREAK, "break 0", regs, break_num, TRAP_BRKPT, SIGTRAP)
-			       	== NOTIFY_STOP) {
+			       	== NOTIFY_STOP)
 			return;
-		}
 		die_if_kernel("bugcheck!", regs, break_num);
 		sig = SIGILL; code = ILL_ILLOPC;
 		break;
@@ -210,15 +195,6 @@ __kprobes ia64_bad_break (unsigned long break_num, struct pt_regs *regs)
 		sig = SIGILL; code = __ILL_BNDMOD;
 		break;
 
-	      case 0x80200:
-	      case 0x80300:
-		if (notify_die(DIE_BREAK, "kprobe", regs, break_num, TRAP_BRKPT, SIGTRAP)
-			       	== NOTIFY_STOP) {
-			return;
-		}
-		sig = SIGTRAP; code = TRAP_BRKPT;
-		break;
-
 	      default:
 		if (break_num < 0x40000 || break_num > 0x100000)
 			die_if_kernel("Bad break", regs, break_num);
@@ -226,6 +202,9 @@ __kprobes ia64_bad_break (unsigned long break_num, struct pt_regs *regs)
 		if (break_num < 0x80000) {
 			sig = SIGILL; code = __ILL_BREAK;
 		} else {
+			if (notify_die(DIE_BREAK, "bad break", regs, break_num, TRAP_BRKPT, SIGTRAP)
+					== NOTIFY_STOP)
+				return;
 			sig = SIGTRAP; code = TRAP_BRKPT;
 		}
 	}
@@ -578,12 +557,11 @@ ia64_fault (unsigned long vector, unsigned long isr, unsigned long ifa,
 #endif
 			break;
 		      case 35: siginfo.si_code = TRAP_BRANCH; ifa = 0; break;
-		      case 36:
-			      if (notify_die(DIE_SS, "ss", &regs, vector,
-					     vector, SIGTRAP) == NOTIFY_STOP)
-				      return;
-			      siginfo.si_code = TRAP_TRACE; ifa = 0; break;
+		      case 36: siginfo.si_code = TRAP_TRACE; ifa = 0; break;
 		}
+		if (notify_die(DIE_FAULT, "ia64_fault", &regs, vector, siginfo.si_code, SIGTRAP)
+			       	== NOTIFY_STOP)
+			return;
 		siginfo.si_signo = SIGTRAP;
 		siginfo.si_errno = 0;
 		siginfo.si_addr  = (void __user *) ifa;
diff --git a/arch/ia64/kernel/uncached.c b/arch/ia64/kernel/uncached.c
index 4e9d06c48a8b..c6d40446c2c4 100644
--- a/arch/ia64/kernel/uncached.c
+++ b/arch/ia64/kernel/uncached.c
@@ -205,23 +205,18 @@ EXPORT_SYMBOL(uncached_free_page);
 static int __init
 uncached_build_memmap(unsigned long start, unsigned long end, void *arg)
 {
-	long length;
-	unsigned long vstart, vend;
+	long length = end - start;
 	int node;
 
-	length = end - start;
-	vstart = start + __IA64_UNCACHED_OFFSET;
-	vend = end + __IA64_UNCACHED_OFFSET;
-
 	dprintk(KERN_ERR "uncached_build_memmap(%lx %lx)\n", start, end);
 
-	memset((char *)vstart, 0, length);
+	memset((char *)start, 0, length);
 
-	node = paddr_to_nid(start);
+	node = paddr_to_nid(start - __IA64_UNCACHED_OFFSET);
 
-	for (; vstart < vend ; vstart += PAGE_SIZE) {
-		dprintk(KERN_INFO "sticking %lx into the pool!\n", vstart);
-		gen_pool_free(uncached_pool[node], vstart, PAGE_SIZE);
+	for (; start < end ; start += PAGE_SIZE) {
+		dprintk(KERN_INFO "sticking %lx into the pool!\n", start);
+		gen_pool_free(uncached_pool[node], start, PAGE_SIZE);
 	}
 
 	return 0;
diff --git a/arch/ia64/lib/Makefile b/arch/ia64/lib/Makefile
index cb1af597370b..ac64664a1807 100644
--- a/arch/ia64/lib/Makefile
+++ b/arch/ia64/lib/Makefile
@@ -9,7 +9,7 @@ lib-y := __divsi3.o __udivsi3.o __modsi3.o __umodsi3.o			\
 	bitop.o checksum.o clear_page.o csum_partial_copy.o		\
 	clear_user.o strncpy_from_user.o strlen_user.o strnlen_user.o	\
 	flush.o ip_fast_csum.o do_csum.o				\
-	memset.o strlen.o swiotlb.o
+	memset.o strlen.o
 
 lib-$(CONFIG_ITANIUM)	+= copy_page.o copy_user.o memcpy.o
 lib-$(CONFIG_MCKINLEY)	+= copy_page_mck.o memcpy_mck.o
diff --git a/arch/ia64/lib/swiotlb.c b/arch/ia64/lib/swiotlb.c
deleted file mode 100644
index dbc0b3e449c5..000000000000
--- a/arch/ia64/lib/swiotlb.c
+++ /dev/null
@@ -1,657 +0,0 @@
-/*
- * Dynamic DMA mapping support.
- *
- * This implementation is for IA-64 platforms that do not support
- * I/O TLBs (aka DMA address translation hardware).
- * Copyright (C) 2000 Asit Mallick <Asit.K.Mallick@intel.com>
- * Copyright (C) 2000 Goutham Rao <goutham.rao@intel.com>
- * Copyright (C) 2000, 2003 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- *
- * 03/05/07 davidm	Switch from PCI-DMA to generic device DMA API.
- * 00/12/13 davidm	Rename to swiotlb.c and add mark_clean() to avoid
- *			unnecessary i-cache flushing.
- * 04/07/.. ak          Better overflow handling. Assorted fixes.
- */
-
-#include <linux/cache.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/spinlock.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ctype.h>
-
-#include <asm/io.h>
-#include <asm/pci.h>
-#include <asm/dma.h>
-
-#include <linux/init.h>
-#include <linux/bootmem.h>
-
-#define OFFSET(val,align) ((unsigned long)	\
-	                   ( (val) & ( (align) - 1)))
-
-#define SG_ENT_VIRT_ADDRESS(sg)	(page_address((sg)->page) + (sg)->offset)
-#define SG_ENT_PHYS_ADDRESS(SG)	virt_to_phys(SG_ENT_VIRT_ADDRESS(SG))
-
-/*
- * Maximum allowable number of contiguous slabs to map,
- * must be a power of 2.  What is the appropriate value ?
- * The complexity of {map,unmap}_single is linearly dependent on this value.
- */
-#define IO_TLB_SEGSIZE	128
-
-/*
- * log of the size of each IO TLB slab.  The number of slabs is command line
- * controllable.
- */
-#define IO_TLB_SHIFT 11
-
-int swiotlb_force;
-
-/*
- * Used to do a quick range check in swiotlb_unmap_single and
- * swiotlb_sync_single_*, to see if the memory was in fact allocated by this
- * API.
- */
-static char *io_tlb_start, *io_tlb_end;
-
-/*
- * The number of IO TLB blocks (in groups of 64) betweeen io_tlb_start and
- * io_tlb_end.  This is command line adjustable via setup_io_tlb_npages.
- */
-static unsigned long io_tlb_nslabs;
-
-/*
- * When the IOMMU overflows we return a fallback buffer. This sets the size.
- */
-static unsigned long io_tlb_overflow = 32*1024;
-
-void *io_tlb_overflow_buffer;
-
-/*
- * This is a free list describing the number of free entries available from
- * each index
- */
-static unsigned int *io_tlb_list;
-static unsigned int io_tlb_index;
-
-/*
- * We need to save away the original address corresponding to a mapped entry
- * for the sync operations.
- */
-static unsigned char **io_tlb_orig_addr;
-
-/*
- * Protect the above data structures in the map and unmap calls
- */
-static DEFINE_SPINLOCK(io_tlb_lock);
-
-static int __init
-setup_io_tlb_npages(char *str)
-{
-	if (isdigit(*str)) {
-		io_tlb_nslabs = simple_strtoul(str, &str, 0);
-		/* avoid tail segment of size < IO_TLB_SEGSIZE */
-		io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE);
-	}
-	if (*str == ',')
-		++str;
-	if (!strcmp(str, "force"))
-		swiotlb_force = 1;
-	return 1;
-}
-__setup("swiotlb=", setup_io_tlb_npages);
-/* make io_tlb_overflow tunable too? */
-
-/*
- * Statically reserve bounce buffer space and initialize bounce buffer data
- * structures for the software IO TLB used to implement the PCI DMA API.
- */
-void
-swiotlb_init_with_default_size (size_t default_size)
-{
-	unsigned long i;
-
-	if (!io_tlb_nslabs) {
-		io_tlb_nslabs = (default_size >> IO_TLB_SHIFT);
-		io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE);
-	}
-
-	/*
-	 * Get IO TLB memory from the low pages
-	 */
-	io_tlb_start = alloc_bootmem_low_pages(io_tlb_nslabs *
-					       (1 << IO_TLB_SHIFT));
-	if (!io_tlb_start)
-		panic("Cannot allocate SWIOTLB buffer");
-	io_tlb_end = io_tlb_start + io_tlb_nslabs * (1 << IO_TLB_SHIFT);
-
-	/*
-	 * Allocate and initialize the free list array.  This array is used
-	 * to find contiguous free memory regions of size up to IO_TLB_SEGSIZE
-	 * between io_tlb_start and io_tlb_end.
-	 */
-	io_tlb_list = alloc_bootmem(io_tlb_nslabs * sizeof(int));
-	for (i = 0; i < io_tlb_nslabs; i++)
- 		io_tlb_list[i] = IO_TLB_SEGSIZE - OFFSET(i, IO_TLB_SEGSIZE);
-	io_tlb_index = 0;
-	io_tlb_orig_addr = alloc_bootmem(io_tlb_nslabs * sizeof(char *));
-
-	/*
-	 * Get the overflow emergency buffer
-	 */
-	io_tlb_overflow_buffer = alloc_bootmem_low(io_tlb_overflow);
-	printk(KERN_INFO "Placing software IO TLB between 0x%lx - 0x%lx\n",
-	       virt_to_phys(io_tlb_start), virt_to_phys(io_tlb_end));
-}
-
-void
-swiotlb_init (void)
-{
-	swiotlb_init_with_default_size(64 * (1<<20));	/* default to 64MB */
-}
-
-static inline int
-address_needs_mapping(struct device *hwdev, dma_addr_t addr)
-{
-	dma_addr_t mask = 0xffffffff;
-	/* If the device has a mask, use it, otherwise default to 32 bits */
-	if (hwdev && hwdev->dma_mask)
-		mask = *hwdev->dma_mask;
-	return (addr & ~mask) != 0;
-}
-
-/*
- * Allocates bounce buffer and returns its kernel virtual address.
- */
-static void *
-map_single(struct device *hwdev, char *buffer, size_t size, int dir)
-{
-	unsigned long flags;
-	char *dma_addr;
-	unsigned int nslots, stride, index, wrap;
-	int i;
-
-	/*
-	 * For mappings greater than a page, we limit the stride (and
-	 * hence alignment) to a page size.
-	 */
-	nslots = ALIGN(size, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT;
-	if (size > PAGE_SIZE)
-		stride = (1 << (PAGE_SHIFT - IO_TLB_SHIFT));
-	else
-		stride = 1;
-
-	if (!nslots)
-		BUG();
-
-	/*
-	 * Find suitable number of IO TLB entries size that will fit this
-	 * request and allocate a buffer from that IO TLB pool.
-	 */
-	spin_lock_irqsave(&io_tlb_lock, flags);
-	{
-		wrap = index = ALIGN(io_tlb_index, stride);
-
-		if (index >= io_tlb_nslabs)
-			wrap = index = 0;
-
-		do {
-			/*
-			 * If we find a slot that indicates we have 'nslots'
-			 * number of contiguous buffers, we allocate the
-			 * buffers from that slot and mark the entries as '0'
-			 * indicating unavailable.
-			 */
-			if (io_tlb_list[index] >= nslots) {
-				int count = 0;
-
-				for (i = index; i < (int) (index + nslots); i++)
-					io_tlb_list[i] = 0;
-				for (i = index - 1; (OFFSET(i, IO_TLB_SEGSIZE) != IO_TLB_SEGSIZE -1) && io_tlb_list[i]; i--)
-					io_tlb_list[i] = ++count;
-				dma_addr = io_tlb_start + (index << IO_TLB_SHIFT);
-
-				/*
-				 * Update the indices to avoid searching in
-				 * the next round.
-				 */
-				io_tlb_index = ((index + nslots) < io_tlb_nslabs
-						? (index + nslots) : 0);
-
-				goto found;
-			}
-			index += stride;
-			if (index >= io_tlb_nslabs)
-				index = 0;
-		} while (index != wrap);
-
-		spin_unlock_irqrestore(&io_tlb_lock, flags);
-		return NULL;
-	}
-  found:
-	spin_unlock_irqrestore(&io_tlb_lock, flags);
-
-	/*
-	 * Save away the mapping from the original address to the DMA address.
-	 * This is needed when we sync the memory.  Then we sync the buffer if
-	 * needed.
-	 */
-	io_tlb_orig_addr[index] = buffer;
-	if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL)
-		memcpy(dma_addr, buffer, size);
-
-	return dma_addr;
-}
-
-/*
- * dma_addr is the kernel virtual address of the bounce buffer to unmap.
- */
-static void
-unmap_single(struct device *hwdev, char *dma_addr, size_t size, int dir)
-{
-	unsigned long flags;
-	int i, count, nslots = ALIGN(size, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT;
-	int index = (dma_addr - io_tlb_start) >> IO_TLB_SHIFT;
-	char *buffer = io_tlb_orig_addr[index];
-
-	/*
-	 * First, sync the memory before unmapping the entry
-	 */
-	if (buffer && ((dir == DMA_FROM_DEVICE) || (dir == DMA_BIDIRECTIONAL)))
-		/*
-		 * bounce... copy the data back into the original buffer * and
-		 * delete the bounce buffer.
-		 */
-		memcpy(buffer, dma_addr, size);
-
-	/*
-	 * Return the buffer to the free list by setting the corresponding
-	 * entries to indicate the number of contigous entries available.
-	 * While returning the entries to the free list, we merge the entries
-	 * with slots below and above the pool being returned.
-	 */
-	spin_lock_irqsave(&io_tlb_lock, flags);
-	{
-		count = ((index + nslots) < ALIGN(index + 1, IO_TLB_SEGSIZE) ?
-			 io_tlb_list[index + nslots] : 0);
-		/*
-		 * Step 1: return the slots to the free list, merging the
-		 * slots with superceeding slots
-		 */
-		for (i = index + nslots - 1; i >= index; i--)
-			io_tlb_list[i] = ++count;
-		/*
-		 * Step 2: merge the returned slots with the preceding slots,
-		 * if available (non zero)
-		 */
-		for (i = index - 1; (OFFSET(i, IO_TLB_SEGSIZE) != IO_TLB_SEGSIZE -1) && io_tlb_list[i]; i--)
-			io_tlb_list[i] = ++count;
-	}
-	spin_unlock_irqrestore(&io_tlb_lock, flags);
-}
-
-static void
-sync_single(struct device *hwdev, char *dma_addr, size_t size, int dir)
-{
-	int index = (dma_addr - io_tlb_start) >> IO_TLB_SHIFT;
-	char *buffer = io_tlb_orig_addr[index];
-
-	/*
-	 * bounce... copy the data back into/from the original buffer
-	 * XXX How do you handle DMA_BIDIRECTIONAL here ?
-	 */
-	if (dir == DMA_FROM_DEVICE)
-		memcpy(buffer, dma_addr, size);
-	else if (dir == DMA_TO_DEVICE)
-		memcpy(dma_addr, buffer, size);
-	else
-		BUG();
-}
-
-void *
-swiotlb_alloc_coherent(struct device *hwdev, size_t size,
-		       dma_addr_t *dma_handle, int flags)
-{
-	unsigned long dev_addr;
-	void *ret;
-	int order = get_order(size);
-
-	/*
-	 * XXX fix me: the DMA API should pass us an explicit DMA mask
-	 * instead, or use ZONE_DMA32 (ia64 overloads ZONE_DMA to be a ~32
-	 * bit range instead of a 16MB one).
-	 */
-	flags |= GFP_DMA;
-
-	ret = (void *)__get_free_pages(flags, order);
-	if (ret && address_needs_mapping(hwdev, virt_to_phys(ret))) {
-		/*
-		 * The allocated memory isn't reachable by the device.
-		 * Fall back on swiotlb_map_single().
-		 */
-		free_pages((unsigned long) ret, order);
-		ret = NULL;
-	}
-	if (!ret) {
-		/*
-		 * We are either out of memory or the device can't DMA
-		 * to GFP_DMA memory; fall back on
-		 * swiotlb_map_single(), which will grab memory from
-		 * the lowest available address range.
-		 */
-		dma_addr_t handle;
-		handle = swiotlb_map_single(NULL, NULL, size, DMA_FROM_DEVICE);
-		if (dma_mapping_error(handle))
-			return NULL;
-
-		ret = phys_to_virt(handle);
-	}
-
-	memset(ret, 0, size);
-	dev_addr = virt_to_phys(ret);
-
-	/* Confirm address can be DMA'd by device */
-	if (address_needs_mapping(hwdev, dev_addr)) {
-		printk("hwdev DMA mask = 0x%016Lx, dev_addr = 0x%016lx\n",
-		       (unsigned long long)*hwdev->dma_mask, dev_addr);
-		panic("swiotlb_alloc_coherent: allocated memory is out of "
-		      "range for device");
-	}
-	*dma_handle = dev_addr;
-	return ret;
-}
-
-void
-swiotlb_free_coherent(struct device *hwdev, size_t size, void *vaddr,
-		      dma_addr_t dma_handle)
-{
-	if (!(vaddr >= (void *)io_tlb_start
-                    && vaddr < (void *)io_tlb_end))
-		free_pages((unsigned long) vaddr, get_order(size));
-	else
-		/* DMA_TO_DEVICE to avoid memcpy in unmap_single */
-		swiotlb_unmap_single (hwdev, dma_handle, size, DMA_TO_DEVICE);
-}
-
-static void
-swiotlb_full(struct device *dev, size_t size, int dir, int do_panic)
-{
-	/*
-	 * Ran out of IOMMU space for this operation. This is very bad.
-	 * Unfortunately the drivers cannot handle this operation properly.
-	 * unless they check for pci_dma_mapping_error (most don't)
-	 * When the mapping is small enough return a static buffer to limit
-	 * the damage, or panic when the transfer is too big.
-	 */
-	printk(KERN_ERR "PCI-DMA: Out of SW-IOMMU space for %lu bytes at "
-	       "device %s\n", size, dev ? dev->bus_id : "?");
-
-	if (size > io_tlb_overflow && do_panic) {
-		if (dir == PCI_DMA_FROMDEVICE || dir == PCI_DMA_BIDIRECTIONAL)
-			panic("PCI-DMA: Memory would be corrupted\n");
-		if (dir == PCI_DMA_TODEVICE || dir == PCI_DMA_BIDIRECTIONAL)
-			panic("PCI-DMA: Random memory would be DMAed\n");
-	}
-}
-
-/*
- * Map a single buffer of the indicated size for DMA in streaming mode.  The
- * PCI address to use is returned.
- *
- * Once the device is given the dma address, the device owns this memory until
- * either swiotlb_unmap_single or swiotlb_dma_sync_single is performed.
- */
-dma_addr_t
-swiotlb_map_single(struct device *hwdev, void *ptr, size_t size, int dir)
-{
-	unsigned long dev_addr = virt_to_phys(ptr);
-	void *map;
-
-	if (dir == DMA_NONE)
-		BUG();
-	/*
-	 * If the pointer passed in happens to be in the device's DMA window,
-	 * we can safely return the device addr and not worry about bounce
-	 * buffering it.
-	 */
-	if (!address_needs_mapping(hwdev, dev_addr) && !swiotlb_force)
-		return dev_addr;
-
-	/*
-	 * Oh well, have to allocate and map a bounce buffer.
-	 */
-	map = map_single(hwdev, ptr, size, dir);
-	if (!map) {
-		swiotlb_full(hwdev, size, dir, 1);
-		map = io_tlb_overflow_buffer;
-	}
-
-	dev_addr = virt_to_phys(map);
-
-	/*
-	 * Ensure that the address returned is DMA'ble
-	 */
-	if (address_needs_mapping(hwdev, dev_addr))
-		panic("map_single: bounce buffer is not DMA'ble");
-
-	return dev_addr;
-}
-
-/*
- * Since DMA is i-cache coherent, any (complete) pages that were written via
- * DMA can be marked as "clean" so that lazy_mmu_prot_update() doesn't have to
- * flush them when they get mapped into an executable vm-area.
- */
-static void
-mark_clean(void *addr, size_t size)
-{
-	unsigned long pg_addr, end;
-
-	pg_addr = PAGE_ALIGN((unsigned long) addr);
-	end = (unsigned long) addr + size;
-	while (pg_addr + PAGE_SIZE <= end) {
-		struct page *page = virt_to_page(pg_addr);
-		set_bit(PG_arch_1, &page->flags);
-		pg_addr += PAGE_SIZE;
-	}
-}
-
-/*
- * Unmap a single streaming mode DMA translation.  The dma_addr and size must
- * match what was provided for in a previous swiotlb_map_single call.  All
- * other usages are undefined.
- *
- * After this call, reads by the cpu to the buffer are guaranteed to see
- * whatever the device wrote there.
- */
-void
-swiotlb_unmap_single(struct device *hwdev, dma_addr_t dev_addr, size_t size,
-		     int dir)
-{
-	char *dma_addr = phys_to_virt(dev_addr);
-
-	if (dir == DMA_NONE)
-		BUG();
-	if (dma_addr >= io_tlb_start && dma_addr < io_tlb_end)
-		unmap_single(hwdev, dma_addr, size, dir);
-	else if (dir == DMA_FROM_DEVICE)
-		mark_clean(dma_addr, size);
-}
-
-/*
- * Make physical memory consistent for a single streaming mode DMA translation
- * after a transfer.
- *
- * If you perform a swiotlb_map_single() but wish to interrogate the buffer
- * using the cpu, yet do not wish to teardown the PCI dma mapping, you must
- * call this function before doing so.  At the next point you give the PCI dma
- * address back to the card, you must first perform a
- * swiotlb_dma_sync_for_device, and then the device again owns the buffer
- */
-void
-swiotlb_sync_single_for_cpu(struct device *hwdev, dma_addr_t dev_addr,
-			    size_t size, int dir)
-{
-	char *dma_addr = phys_to_virt(dev_addr);
-
-	if (dir == DMA_NONE)
-		BUG();
-	if (dma_addr >= io_tlb_start && dma_addr < io_tlb_end)
-		sync_single(hwdev, dma_addr, size, dir);
-	else if (dir == DMA_FROM_DEVICE)
-		mark_clean(dma_addr, size);
-}
-
-void
-swiotlb_sync_single_for_device(struct device *hwdev, dma_addr_t dev_addr,
-			       size_t size, int dir)
-{
-	char *dma_addr = phys_to_virt(dev_addr);
-
-	if (dir == DMA_NONE)
-		BUG();
-	if (dma_addr >= io_tlb_start && dma_addr < io_tlb_end)
-		sync_single(hwdev, dma_addr, size, dir);
-	else if (dir == DMA_FROM_DEVICE)
-		mark_clean(dma_addr, size);
-}
-
-/*
- * Map a set of buffers described by scatterlist in streaming mode for DMA.
- * This is the scatter-gather version of the above swiotlb_map_single
- * interface.  Here the scatter gather list elements are each tagged with the
- * appropriate dma address and length.  They are obtained via
- * sg_dma_{address,length}(SG).
- *
- * NOTE: An implementation may be able to use a smaller number of
- *       DMA address/length pairs than there are SG table elements.
- *       (for example via virtual mapping capabilities)
- *       The routine returns the number of addr/length pairs actually
- *       used, at most nents.
- *
- * Device ownership issues as mentioned above for swiotlb_map_single are the
- * same here.
- */
-int
-swiotlb_map_sg(struct device *hwdev, struct scatterlist *sg, int nelems,
-	       int dir)
-{
-	void *addr;
-	unsigned long dev_addr;
-	int i;
-
-	if (dir == DMA_NONE)
-		BUG();
-
-	for (i = 0; i < nelems; i++, sg++) {
-		addr = SG_ENT_VIRT_ADDRESS(sg);
-		dev_addr = virt_to_phys(addr);
-		if (swiotlb_force || address_needs_mapping(hwdev, dev_addr)) {
-			sg->dma_address = (dma_addr_t) virt_to_phys(map_single(hwdev, addr, sg->length, dir));
-			if (!sg->dma_address) {
-				/* Don't panic here, we expect map_sg users
-				   to do proper error handling. */
-				swiotlb_full(hwdev, sg->length, dir, 0);
-				swiotlb_unmap_sg(hwdev, sg - i, i, dir);
-				sg[0].dma_length = 0;
-				return 0;
-			}
-		} else
-			sg->dma_address = dev_addr;
-		sg->dma_length = sg->length;
-	}
-	return nelems;
-}
-
-/*
- * Unmap a set of streaming mode DMA translations.  Again, cpu read rules
- * concerning calls here are the same as for swiotlb_unmap_single() above.
- */
-void
-swiotlb_unmap_sg(struct device *hwdev, struct scatterlist *sg, int nelems,
-		 int dir)
-{
-	int i;
-
-	if (dir == DMA_NONE)
-		BUG();
-
-	for (i = 0; i < nelems; i++, sg++)
-		if (sg->dma_address != SG_ENT_PHYS_ADDRESS(sg))
-			unmap_single(hwdev, (void *) phys_to_virt(sg->dma_address), sg->dma_length, dir);
-		else if (dir == DMA_FROM_DEVICE)
-			mark_clean(SG_ENT_VIRT_ADDRESS(sg), sg->dma_length);
-}
-
-/*
- * Make physical memory consistent for a set of streaming mode DMA translations
- * after a transfer.
- *
- * The same as swiotlb_sync_single_* but for a scatter-gather list, same rules
- * and usage.
- */
-void
-swiotlb_sync_sg_for_cpu(struct device *hwdev, struct scatterlist *sg,
-			int nelems, int dir)
-{
-	int i;
-
-	if (dir == DMA_NONE)
-		BUG();
-
-	for (i = 0; i < nelems; i++, sg++)
-		if (sg->dma_address != SG_ENT_PHYS_ADDRESS(sg))
-			sync_single(hwdev, (void *) sg->dma_address,
-				    sg->dma_length, dir);
-}
-
-void
-swiotlb_sync_sg_for_device(struct device *hwdev, struct scatterlist *sg,
-			   int nelems, int dir)
-{
-	int i;
-
-	if (dir == DMA_NONE)
-		BUG();
-
-	for (i = 0; i < nelems; i++, sg++)
-		if (sg->dma_address != SG_ENT_PHYS_ADDRESS(sg))
-			sync_single(hwdev, (void *) sg->dma_address,
-				    sg->dma_length, dir);
-}
-
-int
-swiotlb_dma_mapping_error(dma_addr_t dma_addr)
-{
-	return (dma_addr == virt_to_phys(io_tlb_overflow_buffer));
-}
-
-/*
- * Return whether the given PCI device DMA address mask can be supported
- * properly.  For example, if your device can only drive the low 24-bits
- * during PCI bus mastering, then you would pass 0x00ffffff as the mask to
- * this function.
- */
-int
-swiotlb_dma_supported (struct device *hwdev, u64 mask)
-{
-	return (virt_to_phys (io_tlb_end) - 1) <= mask;
-}
-
-EXPORT_SYMBOL(swiotlb_init);
-EXPORT_SYMBOL(swiotlb_map_single);
-EXPORT_SYMBOL(swiotlb_unmap_single);
-EXPORT_SYMBOL(swiotlb_map_sg);
-EXPORT_SYMBOL(swiotlb_unmap_sg);
-EXPORT_SYMBOL(swiotlb_sync_single_for_cpu);
-EXPORT_SYMBOL(swiotlb_sync_single_for_device);
-EXPORT_SYMBOL(swiotlb_sync_sg_for_cpu);
-EXPORT_SYMBOL(swiotlb_sync_sg_for_device);
-EXPORT_SYMBOL(swiotlb_dma_mapping_error);
-EXPORT_SYMBOL(swiotlb_alloc_coherent);
-EXPORT_SYMBOL(swiotlb_free_coherent);
-EXPORT_SYMBOL(swiotlb_dma_supported);
diff --git a/arch/ia64/mm/Makefile b/arch/ia64/mm/Makefile
index 7078f67887ec..d78d20f0a0f0 100644
--- a/arch/ia64/mm/Makefile
+++ b/arch/ia64/mm/Makefile
@@ -7,6 +7,5 @@ obj-y := init.o fault.o tlb.o extable.o
 obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
 obj-$(CONFIG_NUMA)	   += numa.o
 obj-$(CONFIG_DISCONTIGMEM) += discontig.o
-ifndef CONFIG_DISCONTIGMEM
-obj-y += contig.o
-endif
+obj-$(CONFIG_SPARSEMEM)	   += discontig.o
+obj-$(CONFIG_FLATMEM)	   += contig.o
diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c
index 91a055f5731f..acaaec4e4681 100644
--- a/arch/ia64/mm/contig.c
+++ b/arch/ia64/mm/contig.c
@@ -269,7 +269,7 @@ paging_init (void)
 	efi_memmap_walk(find_largest_hole, (u64 *)&max_gap);
 	if (max_gap < LARGE_GAP) {
 		vmem_map = (struct page *) 0;
-		free_area_init_node(0, &contig_page_data, zones_size, 0,
+		free_area_init_node(0, NODE_DATA(0), zones_size, 0,
 				    zholes_size);
 	} else {
 		unsigned long map_size;
@@ -282,7 +282,7 @@ paging_init (void)
 		efi_memmap_walk(create_mem_map_page_table, NULL);
 
 		NODE_DATA(0)->node_mem_map = vmem_map;
-		free_area_init_node(0, &contig_page_data, zones_size,
+		free_area_init_node(0, NODE_DATA(0), zones_size,
 				    0, zholes_size);
 
 		printk("Virtual mem_map starts at 0x%p\n", mem_map);
diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c
index b5c90e548195..0f776b032d31 100644
--- a/arch/ia64/mm/discontig.c
+++ b/arch/ia64/mm/discontig.c
@@ -350,14 +350,12 @@ static void __init initialize_pernode_data(void)
  *	for best.
  * @nid: node id
  * @pernodesize: size of this node's pernode data
- * @align: alignment to use for this node's pernode data
  */
-static void __init *memory_less_node_alloc(int nid, unsigned long pernodesize,
-	unsigned long align)
+static void __init *memory_less_node_alloc(int nid, unsigned long pernodesize)
 {
 	void *ptr = NULL;
 	u8 best = 0xff;
-	int bestnode = -1, node;
+	int bestnode = -1, node, anynode = 0;
 
 	for_each_online_node(node) {
 		if (node_isset(node, memory_less_mask))
@@ -366,13 +364,15 @@ static void __init *memory_less_node_alloc(int nid, unsigned long pernodesize,
 			best = node_distance(nid, node);
 			bestnode = node;
 		}
+		anynode = node;
 	}
 
-	ptr = __alloc_bootmem_node(mem_data[bestnode].pgdat,
-		pernodesize, align, __pa(MAX_DMA_ADDRESS));
+	if (bestnode == -1)
+		bestnode = anynode;
+
+	ptr = __alloc_bootmem_node(mem_data[bestnode].pgdat, pernodesize,
+		PERCPU_PAGE_SIZE, __pa(MAX_DMA_ADDRESS));
 
-	if (!ptr)
-		panic("NO memory for memory less node\n");
 	return ptr;
 }
 
@@ -413,14 +413,44 @@ static void __init memory_less_nodes(void)
 
 	for_each_node_mask(node, memory_less_mask) {
 		pernodesize = compute_pernodesize(node);
-		pernode = memory_less_node_alloc(node, pernodesize,
-			(node) ? (node * PERCPU_PAGE_SIZE) : (1024*1024));
+		pernode = memory_less_node_alloc(node, pernodesize);
 		fill_pernode(node, __pa(pernode), pernodesize);
 	}
 
 	return;
 }
 
+#ifdef CONFIG_SPARSEMEM
+/**
+ * register_sparse_mem - notify SPARSEMEM that this memory range exists.
+ * @start: physical start of range
+ * @end: physical end of range
+ * @arg: unused
+ *
+ * Simply calls SPARSEMEM to register memory section(s).
+ */
+static int __init register_sparse_mem(unsigned long start, unsigned long end,
+	void *arg)
+{
+	int nid;
+
+	start = __pa(start) >> PAGE_SHIFT;
+	end = __pa(end) >> PAGE_SHIFT;
+	nid = early_pfn_to_nid(start);
+	memory_present(nid, start, end);
+
+	return 0;
+}
+
+static void __init arch_sparse_init(void)
+{
+	efi_memmap_walk(register_sparse_mem, NULL);
+	sparse_init();
+}
+#else
+#define arch_sparse_init() do {} while (0)
+#endif
+
 /**
  * find_memory - walk the EFI memory map and setup the bootmem allocator
  *
@@ -524,12 +554,18 @@ void show_mem(void)
 	show_free_areas();
 	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
 	for_each_pgdat(pgdat) {
-		unsigned long present = pgdat->node_present_pages;
+		unsigned long present;
+		unsigned long flags;
 		int shared = 0, cached = 0, reserved = 0;
+
 		printk("Node ID: %d\n", pgdat->node_id);
+		pgdat_resize_lock(pgdat, &flags);
+		present = pgdat->node_present_pages;
 		for(i = 0; i < pgdat->node_spanned_pages; i++) {
-			struct page *page = pgdat_page_nr(pgdat, i);
-			if (!ia64_pfn_valid(pgdat->node_start_pfn+i))
+			struct page *page;
+			if (pfn_valid(pgdat->node_start_pfn + i))
+				page = pfn_to_page(pgdat->node_start_pfn + i);
+			else
 				continue;
 			if (PageReserved(page))
 				reserved++;
@@ -538,6 +574,7 @@ void show_mem(void)
 			else if (page_count(page))
 				shared += page_count(page)-1;
 		}
+		pgdat_resize_unlock(pgdat, &flags);
 		total_present += present;
 		total_reserved += reserved;
 		total_cached += cached;
@@ -648,12 +685,16 @@ void __init paging_init(void)
 
 	max_dma = virt_to_phys((void *) MAX_DMA_ADDRESS) >> PAGE_SHIFT;
 
+	arch_sparse_init();
+
 	efi_memmap_walk(filter_rsvd_memory, count_node_pages);
 
+#ifdef CONFIG_VIRTUAL_MEM_MAP
 	vmalloc_end -= PAGE_ALIGN(max_low_pfn * sizeof(struct page));
 	vmem_map = (struct page *) vmalloc_end;
 	efi_memmap_walk(create_mem_map_page_table, NULL);
 	printk("Virtual mem_map starts at 0x%p\n", vmem_map);
+#endif
 
 	for_each_online_node(node) {
 		memset(zones_size, 0, sizeof(zones_size));
@@ -690,7 +731,9 @@ void __init paging_init(void)
 
 		pfn_offset = mem_data[node].min_pfn;
 
+#ifdef CONFIG_VIRTUAL_MEM_MAP
 		NODE_DATA(node)->node_mem_map = vmem_map + pfn_offset;
+#endif
 		free_area_init_node(node, NODE_DATA(node), zones_size,
 				    pfn_offset, zholes_size);
 	}
diff --git a/arch/ia64/mm/fault.c b/arch/ia64/mm/fault.c
index 3c32af910d60..af7eb087dca7 100644
--- a/arch/ia64/mm/fault.c
+++ b/arch/ia64/mm/fault.c
@@ -20,32 +20,6 @@
 extern void die (char *, struct pt_regs *, long);
 
 /*
- * This routine is analogous to expand_stack() but instead grows the
- * register backing store (which grows towards higher addresses).
- * Since the register backing store is access sequentially, we
- * disallow growing the RBS by more than a page at a time.  Note that
- * the VM_GROWSUP flag can be set on any VM area but that's fine
- * because the total process size is still limited by RLIMIT_STACK and
- * RLIMIT_AS.
- */
-static inline long
-expand_backing_store (struct vm_area_struct *vma, unsigned long address)
-{
-	unsigned long grow;
-
-	grow = PAGE_SIZE >> PAGE_SHIFT;
-	if (address - vma->vm_start > current->signal->rlim[RLIMIT_STACK].rlim_cur
-	    || (((vma->vm_mm->total_vm + grow) << PAGE_SHIFT) > current->signal->rlim[RLIMIT_AS].rlim_cur))
-		return -ENOMEM;
-	vma->vm_end += PAGE_SIZE;
-	vma->vm_mm->total_vm += grow;
-	if (vma->vm_flags & VM_LOCKED)
-		vma->vm_mm->locked_vm += grow;
-	__vm_stat_account(vma->vm_mm, vma->vm_flags, vma->vm_file, grow);
-	return 0;
-}
-
-/*
  * Return TRUE if ADDRESS points at a page in the kernel's mapped segment
  * (inside region 5, on ia64) and that page is present.
  */
@@ -185,7 +159,13 @@ ia64_do_page_fault (unsigned long address, unsigned long isr, struct pt_regs *re
 		if (REGION_NUMBER(address) != REGION_NUMBER(vma->vm_start)
 		    || REGION_OFFSET(address) >= RGN_MAP_LIMIT)
 			goto bad_area;
-		if (expand_backing_store(vma, address))
+		/*
+		 * Since the register backing store is accessed sequentially,
+		 * we disallow growing it by more than a page at a time.
+		 */
+		if (address > vma->vm_end + PAGE_SIZE - sizeof(long))
+			goto bad_area;
+		if (expand_upwards(vma, address))
 			goto bad_area;
 	}
 	goto good_area;
diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index 1281c609ee98..e3215ba64ffd 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -158,7 +158,7 @@ ia64_init_addr_space (void)
 		vma->vm_start = current->thread.rbs_bot & PAGE_MASK;
 		vma->vm_end = vma->vm_start + PAGE_SIZE;
 		vma->vm_page_prot = protection_map[VM_DATA_DEFAULT_FLAGS & 0x7];
-		vma->vm_flags = VM_DATA_DEFAULT_FLAGS | VM_GROWSUP;
+		vma->vm_flags = VM_DATA_DEFAULT_FLAGS|VM_GROWSUP|VM_ACCOUNT;
 		down_write(&current->mm->mmap_sem);
 		if (insert_vm_struct(current->mm, vma)) {
 			up_write(&current->mm->mmap_sem);
@@ -275,26 +275,21 @@ put_kernel_page (struct page *page, unsigned long address, pgprot_t pgprot)
 
 	pgd = pgd_offset_k(address);		/* note: this is NOT pgd_offset()! */
 
-	spin_lock(&init_mm.page_table_lock);
 	{
 		pud = pud_alloc(&init_mm, pgd, address);
 		if (!pud)
 			goto out;
-
 		pmd = pmd_alloc(&init_mm, pud, address);
 		if (!pmd)
 			goto out;
-		pte = pte_alloc_map(&init_mm, pmd, address);
+		pte = pte_alloc_kernel(pmd, address);
 		if (!pte)
 			goto out;
-		if (!pte_none(*pte)) {
-			pte_unmap(pte);
+		if (!pte_none(*pte))
 			goto out;
-		}
 		set_pte(pte, mk_pte(page, pgprot));
-		pte_unmap(pte);
 	}
-  out:	spin_unlock(&init_mm.page_table_lock);
+  out:
 	/* no need for flush_tlb */
 	return page;
 }
@@ -593,7 +588,7 @@ mem_init (void)
 	platform_dma_init();
 #endif
 
-#ifndef CONFIG_DISCONTIGMEM
+#ifdef CONFIG_FLATMEM
 	if (!mem_map)
 		BUG();
 	max_mapnr = max_low_pfn;
diff --git a/arch/ia64/mm/numa.c b/arch/ia64/mm/numa.c
index 77118bbf3d8b..4e5c8b36ad93 100644
--- a/arch/ia64/mm/numa.c
+++ b/arch/ia64/mm/numa.c
@@ -47,3 +47,27 @@ paddr_to_nid(unsigned long paddr)
 
 	return (i < num_node_memblks) ? node_memblk[i].nid : (num_node_memblks ? -1 : 0);
 }
+
+#if defined(CONFIG_SPARSEMEM) && defined(CONFIG_NUMA)
+/*
+ * Because of holes evaluate on section limits.
+ * If the section of memory exists, then return the node where the section
+ * resides.  Otherwise return node 0 as the default.  This is used by
+ * SPARSEMEM to allocate the SPARSEMEM sectionmap on the NUMA node where
+ * the section resides.
+ */
+int early_pfn_to_nid(unsigned long pfn)
+{
+	int i, section = pfn >> PFN_SECTION_SHIFT, ssec, esec;
+
+	for (i = 0; i < num_node_memblks; i++) {
+		ssec = node_memblk[i].start_paddr >> PA_SECTION_SHIFT;
+		esec = (node_memblk[i].start_paddr + node_memblk[i].size +
+			((1L << PA_SECTION_SHIFT) - 1)) >> PA_SECTION_SHIFT;
+		if (section >= ssec && section < esec)
+			return node_memblk[i].nid;
+	}
+
+	return 0;
+}
+#endif
diff --git a/arch/ia64/mm/tlb.c b/arch/ia64/mm/tlb.c
index 464557e4ed82..41105d454423 100644
--- a/arch/ia64/mm/tlb.c
+++ b/arch/ia64/mm/tlb.c
@@ -8,6 +8,8 @@
  *		Modified RID allocation for SMP
  *          Goutham Rao <goutham.rao@intel.com>
  *              IPI based ptc implementation and A-step IPI implementation.
+ * Rohit Seth <rohit.seth@intel.com>
+ * Ken Chen <kenneth.w.chen@intel.com>
  */
 #include <linux/config.h>
 #include <linux/module.h>
@@ -16,80 +18,83 @@
 #include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/mm.h>
+#include <linux/bootmem.h>
 
 #include <asm/delay.h>
 #include <asm/mmu_context.h>
 #include <asm/pgalloc.h>
 #include <asm/pal.h>
 #include <asm/tlbflush.h>
+#include <asm/dma.h>
 
 static struct {
 	unsigned long mask;	/* mask of supported purge page-sizes */
-	unsigned long max_bits;	/* log2() of largest supported purge page-size */
+	unsigned long max_bits;	/* log2 of largest supported purge page-size */
 } purge;
 
 struct ia64_ctx ia64_ctx = {
 	.lock =		SPIN_LOCK_UNLOCKED,
 	.next =		1,
-	.limit =	(1 << 15) - 1,		/* start out with the safe (architected) limit */
 	.max_ctx =	~0U
 };
 
 DEFINE_PER_CPU(u8, ia64_need_tlb_flush);
 
 /*
+ * Initializes the ia64_ctx.bitmap array based on max_ctx+1.
+ * Called after cpu_init() has setup ia64_ctx.max_ctx based on
+ * maximum RID that is supported by boot CPU.
+ */
+void __init
+mmu_context_init (void)
+{
+	ia64_ctx.bitmap = alloc_bootmem((ia64_ctx.max_ctx+1)>>3);
+	ia64_ctx.flushmap = alloc_bootmem((ia64_ctx.max_ctx+1)>>3);
+}
+
+/*
  * Acquire the ia64_ctx.lock before calling this function!
  */
 void
 wrap_mmu_context (struct mm_struct *mm)
 {
-	unsigned long tsk_context, max_ctx = ia64_ctx.max_ctx;
-	struct task_struct *tsk;
-	int i;
+	int i, cpu;
+	unsigned long flush_bit;
 
-	if (ia64_ctx.next > max_ctx)
-		ia64_ctx.next = 300;	/* skip daemons */
-	ia64_ctx.limit = max_ctx + 1;
+	for (i=0; i <= ia64_ctx.max_ctx / BITS_PER_LONG; i++) {
+		flush_bit = xchg(&ia64_ctx.flushmap[i], 0);
+		ia64_ctx.bitmap[i] ^= flush_bit;
+	}
+ 
+	/* use offset at 300 to skip daemons */
+	ia64_ctx.next = find_next_zero_bit(ia64_ctx.bitmap,
+				ia64_ctx.max_ctx, 300);
+	ia64_ctx.limit = find_next_bit(ia64_ctx.bitmap,
+				ia64_ctx.max_ctx, ia64_ctx.next);
 
 	/*
-	 * Scan all the task's mm->context and set proper safe range
+	 * can't call flush_tlb_all() here because of race condition
+	 * with O(1) scheduler [EF]
 	 */
-
-	read_lock(&tasklist_lock);
-  repeat:
-	for_each_process(tsk) {
-		if (!tsk->mm)
-			continue;
-		tsk_context = tsk->mm->context;
-		if (tsk_context == ia64_ctx.next) {
-			if (++ia64_ctx.next >= ia64_ctx.limit) {
-				/* empty range: reset the range limit and start over */
-				if (ia64_ctx.next > max_ctx)
-					ia64_ctx.next = 300;
-				ia64_ctx.limit = max_ctx + 1;
-				goto repeat;
-			}
-		}
-		if ((tsk_context > ia64_ctx.next) && (tsk_context < ia64_ctx.limit))
-			ia64_ctx.limit = tsk_context;
-	}
-	read_unlock(&tasklist_lock);
-	/* can't call flush_tlb_all() here because of race condition with O(1) scheduler [EF] */
-	{
-		int cpu = get_cpu(); /* prevent preemption/migration */
-		for (i = 0; i < NR_CPUS; ++i)
-			if (cpu_online(i) && (i != cpu))
-				per_cpu(ia64_need_tlb_flush, i) = 1;
-		put_cpu();
-	}
+	cpu = get_cpu(); /* prevent preemption/migration */
+	for_each_online_cpu(i)
+		if (i != cpu)
+			per_cpu(ia64_need_tlb_flush, i) = 1;
+	put_cpu();
 	local_flush_tlb_all();
 }
 
 void
-ia64_global_tlb_purge (unsigned long start, unsigned long end, unsigned long nbits)
+ia64_global_tlb_purge (struct mm_struct *mm, unsigned long start,
+		       unsigned long end, unsigned long nbits)
 {
 	static DEFINE_SPINLOCK(ptcg_lock);
 
+	if (mm != current->active_mm) {
+		flush_tlb_all();
+		return;
+	}
+
 	/* HW requires global serialization of ptc.ga.  */
 	spin_lock(&ptcg_lock);
 	{
@@ -129,36 +134,37 @@ local_flush_tlb_all (void)
 }
 
 void
-flush_tlb_range (struct vm_area_struct *vma, unsigned long start, unsigned long end)
+flush_tlb_range (struct vm_area_struct *vma, unsigned long start,
+		 unsigned long end)
 {
 	struct mm_struct *mm = vma->vm_mm;
 	unsigned long size = end - start;
 	unsigned long nbits;
 
+#ifndef CONFIG_SMP
 	if (mm != current->active_mm) {
-		/* this does happen, but perhaps it's not worth optimizing for? */
-#ifdef CONFIG_SMP
-		flush_tlb_all();
-#else
 		mm->context = 0;
-#endif
 		return;
 	}
+#endif
 
 	nbits = ia64_fls(size + 0xfff);
-	while (unlikely (((1UL << nbits) & purge.mask) == 0) && (nbits < purge.max_bits))
+	while (unlikely (((1UL << nbits) & purge.mask) == 0) &&
+			(nbits < purge.max_bits))
 		++nbits;
 	if (nbits > purge.max_bits)
 		nbits = purge.max_bits;
 	start &= ~((1UL << nbits) - 1);
 
 # ifdef CONFIG_SMP
-	platform_global_tlb_purge(start, end, nbits);
+	platform_global_tlb_purge(mm, start, end, nbits);
 # else
+	preempt_disable();
 	do {
 		ia64_ptcl(start, (nbits<<2));
 		start += (1UL << nbits);
 	} while (start < end);
+	preempt_enable();
 # endif
 
 	ia64_srlz_i();			/* srlz.i implies srlz.d */
@@ -186,5 +192,5 @@ ia64_tlb_init (void)
 	local_cpu_data->ptce_stride[0] = ptce_info.stride[0];
 	local_cpu_data->ptce_stride[1] = ptce_info.stride[1];
 
-	local_flush_tlb_all();		/* nuke left overs from bootstrapping... */
+	local_flush_tlb_all();	/* nuke left overs from bootstrapping... */
 }
diff --git a/arch/ia64/oprofile/Kconfig b/arch/ia64/oprofile/Kconfig
index 56e6f614b04a..97271ab484dc 100644
--- a/arch/ia64/oprofile/Kconfig
+++ b/arch/ia64/oprofile/Kconfig
@@ -1,7 +1,3 @@
-
-menu "Profiling support"
-	depends on EXPERIMENTAL
-
 config PROFILING
 	bool "Profiling support (EXPERIMENTAL)"
 	help
@@ -22,5 +18,3 @@ config OPROFILE
 
 	  If unsure, say N.
 
-endmenu
-
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 9b5de589b82f..20d76fae24e8 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -95,7 +95,7 @@ pci_sal_write (unsigned int seg, unsigned int bus, unsigned int devfn,
 }
 
 static struct pci_raw_ops pci_sal_ops = {
-	.read = 	pci_sal_read,
+	.read =		pci_sal_read,
 	.write =	pci_sal_write
 };
 
@@ -120,29 +120,6 @@ struct pci_ops pci_root_ops = {
 	.write = pci_write,
 };
 
-#ifdef CONFIG_NUMA
-extern acpi_status acpi_map_iosapic(acpi_handle, u32, void *, void **);
-static void acpi_map_iosapics(void)
-{
-	acpi_get_devices(NULL, acpi_map_iosapic, NULL, NULL);
-}
-#else
-static void acpi_map_iosapics(void)
-{
-	return;
-}
-#endif /* CONFIG_NUMA */
-
-static int __init
-pci_acpi_init (void)
-{
-	acpi_map_iosapics();
-
-	return 0;
-}
-
-subsys_initcall(pci_acpi_init);
-
 /* Called by ACPI when it finds a new root bus.  */
 
 static struct pci_controller * __devinit
@@ -160,35 +137,121 @@ alloc_pci_controller (int seg)
 	return controller;
 }
 
-static u64 __devinit
-add_io_space (struct acpi_resource_address64 *addr)
+struct pci_root_info {
+	struct pci_controller *controller;
+	char *name;
+};
+
+static unsigned int
+new_space (u64 phys_base, int sparse)
 {
-	u64 offset;
-	int sparse = 0;
+	u64 mmio_base;
 	int i;
 
-	if (addr->address_translation_offset == 0)
-		return IO_SPACE_BASE(0);	/* part of legacy IO space */
-
-	if (addr->attribute.io.translation_attribute == ACPI_SPARSE_TRANSLATION)
-		sparse = 1;
+	if (phys_base == 0)
+		return 0;	/* legacy I/O port space */
 
-	offset = (u64) ioremap(addr->address_translation_offset, 0);
+	mmio_base = (u64) ioremap(phys_base, 0);
 	for (i = 0; i < num_io_spaces; i++)
-		if (io_space[i].mmio_base == offset &&
+		if (io_space[i].mmio_base == mmio_base &&
 		    io_space[i].sparse == sparse)
-			return IO_SPACE_BASE(i);
+			return i;
 
 	if (num_io_spaces == MAX_IO_SPACES) {
-		printk("Too many IO port spaces\n");
+		printk(KERN_ERR "PCI: Too many IO port spaces "
+			"(MAX_IO_SPACES=%lu)\n", MAX_IO_SPACES);
 		return ~0;
 	}
 
 	i = num_io_spaces++;
-	io_space[i].mmio_base = offset;
+	io_space[i].mmio_base = mmio_base;
 	io_space[i].sparse = sparse;
 
-	return IO_SPACE_BASE(i);
+	return i;
+}
+
+static u64 __devinit
+add_io_space (struct pci_root_info *info, struct acpi_resource_address64 *addr)
+{
+	struct resource *resource;
+	char *name;
+	u64 base, min, max, base_port;
+	unsigned int sparse = 0, space_nr, len;
+
+	resource = kzalloc(sizeof(*resource), GFP_KERNEL);
+	if (!resource) {
+		printk(KERN_ERR "PCI: No memory for %s I/O port space\n",
+			info->name);
+		goto out;
+	}
+
+	len = strlen(info->name) + 32;
+	name = kzalloc(len, GFP_KERNEL);
+	if (!name) {
+		printk(KERN_ERR "PCI: No memory for %s I/O port space name\n",
+			info->name);
+		goto free_resource;
+	}
+
+	min = addr->min_address_range;
+	max = min + addr->address_length - 1;
+	if (addr->attribute.io.translation_attribute == ACPI_SPARSE_TRANSLATION)
+		sparse = 1;
+
+	space_nr = new_space(addr->address_translation_offset, sparse);
+	if (space_nr == ~0)
+		goto free_name;
+
+	base = __pa(io_space[space_nr].mmio_base);
+	base_port = IO_SPACE_BASE(space_nr);
+	snprintf(name, len, "%s I/O Ports %08lx-%08lx", info->name,
+		base_port + min, base_port + max);
+
+	/*
+	 * The SDM guarantees the legacy 0-64K space is sparse, but if the
+	 * mapping is done by the processor (not the bridge), ACPI may not
+	 * mark it as sparse.
+	 */
+	if (space_nr == 0)
+		sparse = 1;
+
+	resource->name  = name;
+	resource->flags = IORESOURCE_MEM;
+	resource->start = base + (sparse ? IO_SPACE_SPARSE_ENCODING(min) : min);
+	resource->end   = base + (sparse ? IO_SPACE_SPARSE_ENCODING(max) : max);
+	insert_resource(&iomem_resource, resource);
+
+	return base_port;
+
+free_name:
+	kfree(name);
+free_resource:
+	kfree(resource);
+out:
+	return ~0;
+}
+
+static acpi_status __devinit resource_to_window(struct acpi_resource *resource,
+	struct acpi_resource_address64 *addr)
+{
+	acpi_status status;
+
+	/*
+	 * We're only interested in _CRS descriptors that are
+	 *	- address space descriptors for memory or I/O space
+	 *	- non-zero size
+	 *	- producers, i.e., the address space is routed downstream,
+	 *	  not consumed by the bridge itself
+	 */
+	status = acpi_resource_to_address64(resource, addr);
+	if (ACPI_SUCCESS(status) &&
+	    (addr->resource_type == ACPI_MEMORY_RANGE ||
+	     addr->resource_type == ACPI_IO_RANGE) &&
+	    addr->address_length &&
+	    addr->producer_consumer == ACPI_PRODUCER)
+		return AE_OK;
+
+	return AE_ERROR;
 }
 
 static acpi_status __devinit
@@ -198,20 +261,13 @@ count_window (struct acpi_resource *resource, void *data)
 	struct acpi_resource_address64 addr;
 	acpi_status status;
 
-	status = acpi_resource_to_address64(resource, &addr);
+	status = resource_to_window(resource, &addr);
 	if (ACPI_SUCCESS(status))
-		if (addr.resource_type == ACPI_MEMORY_RANGE ||
-		    addr.resource_type == ACPI_IO_RANGE)
-			(*windows)++;
+		(*windows)++;
 
 	return AE_OK;
 }
 
-struct pci_root_info {
-	struct pci_controller *controller;
-	char *name;
-};
-
 static __devinit acpi_status add_window(struct acpi_resource *res, void *data)
 {
 	struct pci_root_info *info = data;
@@ -221,13 +277,11 @@ static __devinit acpi_status add_window(struct acpi_resource *res, void *data)
 	unsigned long flags, offset = 0;
 	struct resource *root;
 
-	status = acpi_resource_to_address64(res, &addr);
+	/* Return AE_OK for non-window resources to keep scanning for more */
+	status = resource_to_window(res, &addr);
 	if (!ACPI_SUCCESS(status))
 		return AE_OK;
 
-	if (!addr.address_length)
-		return AE_OK;
-
 	if (addr.resource_type == ACPI_MEMORY_RANGE) {
 		flags = IORESOURCE_MEM;
 		root = &iomem_resource;
@@ -235,7 +289,7 @@ static __devinit acpi_status add_window(struct acpi_resource *res, void *data)
 	} else if (addr.resource_type == ACPI_IO_RANGE) {
 		flags = IORESOURCE_IO;
 		root = &ioport_resource;
-		offset = add_io_space(&addr);
+		offset = add_io_space(info, &addr);
 		if (offset == ~0)
 			return AE_OK;
 	} else
@@ -245,7 +299,7 @@ static __devinit acpi_status add_window(struct acpi_resource *res, void *data)
 	window->resource.name = info->name;
 	window->resource.flags = flags;
 	window->resource.start = addr.min_address_range + offset;
-	window->resource.end = addr.max_address_range + offset;
+	window->resource.end = window->resource.start + addr.address_length - 1;
 	window->resource.child = NULL;
 	window->offset = offset;
 
@@ -743,7 +797,7 @@ int pci_vector_resources(int last, int nr_released)
 {
 	int count = nr_released;
 
- 	count += (IA64_LAST_DEVICE_VECTOR - last);
+	count += (IA64_LAST_DEVICE_VECTOR - last);
 
 	return count;
 }
diff --git a/arch/ia64/sn/kernel/bte.c b/arch/ia64/sn/kernel/bte.c
index 45854c637e9c..dd73c0cb754b 100644
--- a/arch/ia64/sn/kernel/bte.c
+++ b/arch/ia64/sn/kernel/bte.c
@@ -87,7 +87,7 @@ bte_result_t bte_copy(u64 src, u64 dest, u64 len, u64 mode, void *notification)
 	unsigned long irq_flags;
 	unsigned long itc_end = 0;
 	int nasid_to_try[MAX_NODES_TO_TRY];
-	int my_nasid = get_nasid();
+	int my_nasid = cpuid_to_nasid(raw_smp_processor_id());
 	int bte_if_index, nasid_index;
 	int bte_first, btes_per_node = BTES_PER_NODE;
 
@@ -137,6 +137,7 @@ retry_bteop:
 			bte = bte_if_on_node(nasid_to_try[nasid_index],bte_if_index);
 
 			if (bte == NULL) {
+				nasid_index++;
 				continue;
 			}
 
diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c
index 906622d9f933..05e4ea889981 100644
--- a/arch/ia64/sn/kernel/io_init.c
+++ b/arch/ia64/sn/kernel/io_init.c
@@ -22,8 +22,6 @@
 #include "xtalk/hubdev.h"
 #include "xtalk/xwidgetdev.h"
 
-nasid_t master_nasid = INVALID_NASID;	/* Partition Master */
-
 static struct list_head sn_sysdata_list;
 
 /* sysdata list struct */
@@ -165,7 +163,7 @@ static void sn_fixup_ionodes(void)
 	 * Get SGI Specific HUB chipset information.
 	 * Inform Prom that this kernel can support domain bus numbering.
 	 */
-	for (i = 0; i < numionodes; i++) {
+	for (i = 0; i < num_cnodes; i++) {
 		hubdev = (struct hubdev_info *)(NODEPDA(i)->pdinfo);
 		nasid = cnodeid_to_nasid(i);
 		hubdev->max_segment_number = 0xffffffff;
@@ -351,7 +349,7 @@ void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus)
 		return;		/*bus # does not exist */
 	prom_bussoft_ptr = __va(prom_bussoft_ptr);
 
- 	controller = kcalloc(1,sizeof(struct pci_controller), GFP_KERNEL);
+ 	controller = kzalloc(sizeof(struct pci_controller), GFP_KERNEL);
 	controller->segment = segment;
  	if (!controller)
  		BUG();
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
index 6f8c5883716b..e510dce9971f 100644
--- a/arch/ia64/sn/kernel/setup.c
+++ b/arch/ia64/sn/kernel/setup.c
@@ -30,6 +30,7 @@
 #include <linux/root_dev.h>
 #include <linux/nodemask.h>
 #include <linux/pm.h>
+#include <linux/efi.h>
 
 #include <asm/io.h>
 #include <asm/sal.h>
@@ -59,8 +60,6 @@ DEFINE_PER_CPU(struct pda_s, pda_percpu);
 
 #define MAX_PHYS_MEMORY		(1UL << IA64_MAX_PHYS_BITS)	/* Max physical address supported */
 
-lboard_t *root_lboard[MAX_COMPACT_NODES];
-
 extern void bte_init_node(nodepda_t *, cnodeid_t);
 
 extern void sn_timer_init(void);
@@ -97,15 +96,15 @@ u8 sn_region_size;
 EXPORT_SYMBOL(sn_region_size);
 int sn_prom_type;	/* 0=hardware, 1=medusa/realprom, 2=medusa/fakeprom */
 
-short physical_node_map[MAX_PHYSNODE_ID];
+short physical_node_map[MAX_NUMALINK_NODES];
 static unsigned long sn_prom_features[MAX_PROM_FEATURE_SETS];
 
 EXPORT_SYMBOL(physical_node_map);
 
-int numionodes;
+int num_cnodes;
 
 static void sn_init_pdas(char **);
-static void scan_for_ionodes(void);
+static void build_cnode_tables(void);
 
 static nodepda_t *nodepdaindr[MAX_COMPACT_NODES];
 
@@ -140,19 +139,6 @@ char drive_info[4 * 16];
 #endif
 
 /*
- * Get nasid of current cpu early in boot before nodepda is initialized
- */
-static int
-boot_get_nasid(void)
-{
-	int nasid;
-
-	if (ia64_sn_get_sapic_info(get_sapicid(), &nasid, NULL, NULL))
-		BUG();
-	return nasid;
-}
-
-/*
  * This routine can only be used during init, since
  * smp_boot_data is an init data structure.
  * We have to use smp_boot_data.cpu_phys_id to find
@@ -223,7 +209,6 @@ void __init early_sn_setup(void)
 }
 
 extern int platform_intr_list[];
-extern nasid_t master_nasid;
 static int __initdata shub_1_1_found = 0;
 
 /*
@@ -258,6 +243,135 @@ static void __init sn_check_for_wars(void)
 	}
 }
 
+/*
+ * Scan the EFI PCDP table (if it exists) for an acceptable VGA console
+ * output device.  If one exists, pick it and set sn_legacy_{io,mem} to
+ * reflect the bus offsets needed to address it.
+ *
+ * Since pcdp support in SN is not supported in the 2.4 kernel (or at least
+ * the one lbs is based on) just declare the needed structs here.
+ *
+ * Reference spec http://www.dig64.org/specifications/DIG64_PCDPv20.pdf
+ *
+ * Returns 0 if no acceptable vga is found, !0 otherwise.
+ *
+ * Note:  This stuff is duped here because Altix requires the PCDP to
+ * locate a usable VGA device due to lack of proper ACPI support.  Structures
+ * could be used from drivers/firmware/pcdp.h, but it was decided that moving
+ * this file to a more public location just for Altix use was undesireable.
+ */
+
+struct hcdp_uart_desc {
+	u8	pad[45];
+};
+
+struct pcdp {
+	u8	signature[4];	/* should be 'HCDP' */
+	u32	length;
+	u8	rev;		/* should be >=3 for pcdp, <3 for hcdp */
+	u8	sum;
+	u8	oem_id[6];
+	u64	oem_tableid;
+	u32	oem_rev;
+	u32	creator_id;
+	u32	creator_rev;
+	u32	num_type0;
+	struct hcdp_uart_desc uart[0];	/* num_type0 of these */
+	/* pcdp descriptors follow */
+}  __attribute__((packed));
+
+struct pcdp_device_desc {
+	u8	type;
+	u8	primary;
+	u16	length;
+	u16	index;
+	/* interconnect specific structure follows */
+	/* device specific structure follows that */
+}  __attribute__((packed));
+
+struct pcdp_interface_pci {
+	u8	type;		/* 1 == pci */
+	u8	reserved;
+	u16	length;
+	u8	segment;
+	u8	bus;
+	u8 	dev;
+	u8	fun;
+	u16	devid;
+	u16	vendid;
+	u32	acpi_interrupt;
+	u64	mmio_tra;
+	u64	ioport_tra;
+	u8	flags;
+	u8	translation;
+}  __attribute__((packed));
+
+struct pcdp_vga_device {
+	u8	num_eas_desc;
+	/* ACPI Extended Address Space Desc follows */
+}  __attribute__((packed));
+
+/* from pcdp_device_desc.primary */
+#define PCDP_PRIMARY_CONSOLE	0x01
+
+/* from pcdp_device_desc.type */
+#define PCDP_CONSOLE_INOUT	0x0
+#define PCDP_CONSOLE_DEBUG	0x1
+#define PCDP_CONSOLE_OUT	0x2
+#define PCDP_CONSOLE_IN		0x3
+#define PCDP_CONSOLE_TYPE_VGA	0x8
+
+#define PCDP_CONSOLE_VGA	(PCDP_CONSOLE_TYPE_VGA | PCDP_CONSOLE_OUT)
+
+/* from pcdp_interface_pci.type */
+#define PCDP_IF_PCI		1
+
+/* from pcdp_interface_pci.translation */
+#define PCDP_PCI_TRANS_IOPORT	0x02
+#define PCDP_PCI_TRANS_MMIO	0x01
+
+static void
+sn_scan_pcdp(void)
+{
+	u8 *bp;
+	struct pcdp *pcdp;
+	struct pcdp_device_desc device;
+	struct pcdp_interface_pci if_pci;
+	extern struct efi efi;
+
+	pcdp = efi.hcdp;
+	if (! pcdp)
+		return;		/* no hcdp/pcdp table */
+
+	if (pcdp->rev < 3)
+		return;		/* only support PCDP (rev >= 3) */
+
+	for (bp = (u8 *)&pcdp->uart[pcdp->num_type0];
+	     bp < (u8 *)pcdp + pcdp->length;
+	     bp += device.length) {
+		memcpy(&device, bp, sizeof(device));
+		if (! (device.primary & PCDP_PRIMARY_CONSOLE))
+			continue;	/* not primary console */
+
+		if (device.type != PCDP_CONSOLE_VGA)
+			continue;	/* not VGA descriptor */
+
+		memcpy(&if_pci, bp+sizeof(device), sizeof(if_pci));
+		if (if_pci.type != PCDP_IF_PCI)
+			continue;	/* not PCI interconnect */
+
+		if (if_pci.translation & PCDP_PCI_TRANS_IOPORT)
+			vga_console_iobase =
+				if_pci.ioport_tra | __IA64_UNCACHED_OFFSET;
+
+		if (if_pci.translation & PCDP_PCI_TRANS_MMIO)
+			vga_console_membase =
+				if_pci.mmio_tra | __IA64_UNCACHED_OFFSET;
+
+		break; /* once we find the primary, we're done */
+	}
+}
+
 /**
  * sn_setup - SN platform setup routine
  * @cmdline_p: kernel command line
@@ -269,7 +383,6 @@ static void __init sn_check_for_wars(void)
 void __init sn_setup(char **cmdline_p)
 {
 	long status, ticks_per_sec, drift;
-	int pxm;
 	u32 version = sn_sal_rev();
 	extern void sn_cpu_init(void);
 
@@ -280,16 +393,35 @@ void __init sn_setup(char **cmdline_p)
 
 #if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
 	/*
-	 * If there was a primary vga adapter identified through the
-	 * EFI PCDP table, make it the preferred console.  Otherwise
-	 * zero out conswitchp.
+	 * Handle SN vga console.
+	 *
+	 * SN systems do not have enough ACPI table information
+	 * being passed from prom to identify VGA adapters and the legacy
+	 * addresses to access them.  Until that is done, SN systems rely
+	 * on the PCDP table to identify the primary VGA console if one
+	 * exists.
+	 *
+	 * However, kernel PCDP support is optional, and even if it is built
+	 * into the kernel, it will not be used if the boot cmdline contains
+	 * console= directives.
+	 *
+	 * So, to work around this mess, we duplicate some of the PCDP code
+	 * here so that the primary VGA console (as defined by PCDP) will
+	 * work on SN systems even if a different console (e.g. serial) is
+	 * selected on the boot line (or CONFIG_EFI_PCDP is off).
 	 */
 
+	if (! vga_console_membase)
+		sn_scan_pcdp();
+
 	if (vga_console_membase) {
 		/* usable vga ... make tty0 the preferred default console */
-		add_preferred_console("tty", 0, NULL);
+		if (!strstr(*cmdline_p, "console="))
+			add_preferred_console("tty", 0, NULL);
 	} else {
 		printk(KERN_DEBUG "SGI: Disabling VGA console\n");
+		if (!strstr(*cmdline_p, "console="))
+			add_preferred_console("ttySG", 0, NULL);
 #ifdef CONFIG_DUMMY_CONSOLE
 		conswitchp = &dummy_con;
 #else
@@ -300,11 +432,10 @@ void __init sn_setup(char **cmdline_p)
 
 	MAX_DMA_ADDRESS = PAGE_OFFSET + MAX_PHYS_MEMORY;
 
-	memset(physical_node_map, -1, sizeof(physical_node_map));
-	for (pxm = 0; pxm < MAX_PXM_DOMAINS; pxm++)
-		if (pxm_to_nid_map[pxm] != -1)
-			physical_node_map[pxm_to_nasid(pxm)] =
-			    pxm_to_nid_map[pxm];
+	/*
+	 * Build the tables for managing cnodes.
+	 */
+	build_cnode_tables();
 
 	/*
 	 * Old PROMs do not provide an ACPI FADT. Disable legacy keyboard
@@ -319,8 +450,6 @@ void __init sn_setup(char **cmdline_p)
 
 	printk("SGI SAL version %x.%02x\n", version >> 8, version & 0x00FF);
 
-	master_nasid = boot_get_nasid();
-
 	status =
 	    ia64_sal_freq_base(SAL_FREQ_BASE_REALTIME_CLOCK, &ticks_per_sec,
 			       &drift);
@@ -378,15 +507,6 @@ static void __init sn_init_pdas(char **cmdline_p)
 {
 	cnodeid_t cnode;
 
-	memset(sn_cnodeid_to_nasid, -1,
-			sizeof(__ia64_per_cpu_var(__sn_cnodeid_to_nasid)));
-	for_each_online_node(cnode)
-		sn_cnodeid_to_nasid[cnode] =
-				pxm_to_nasid(nid_to_pxm_map[cnode]);
-
-	numionodes = num_online_nodes();
-	scan_for_ionodes();
-
 	/*
 	 * Allocate & initalize the nodepda for each node.
 	 */
@@ -402,7 +522,7 @@ static void __init sn_init_pdas(char **cmdline_p)
 	/*
 	 * Allocate & initialize nodepda for TIOs.  For now, put them on node 0.
 	 */
-	for (cnode = num_online_nodes(); cnode < numionodes; cnode++) {
+	for (cnode = num_online_nodes(); cnode < num_cnodes; cnode++) {
 		nodepdaindr[cnode] =
 		    alloc_bootmem_node(NODE_DATA(0), sizeof(nodepda_t));
 		memset(nodepdaindr[cnode], 0, sizeof(nodepda_t));
@@ -411,7 +531,7 @@ static void __init sn_init_pdas(char **cmdline_p)
 	/*
 	 * Now copy the array of nodepda pointers to each nodepda.
 	 */
-	for (cnode = 0; cnode < numionodes; cnode++)
+	for (cnode = 0; cnode < num_cnodes; cnode++)
 		memcpy(nodepdaindr[cnode]->pernode_pdaindr, nodepdaindr,
 		       sizeof(nodepdaindr));
 
@@ -428,7 +548,7 @@ static void __init sn_init_pdas(char **cmdline_p)
 	 * Initialize the per node hubdev.  This includes IO Nodes and
 	 * headless/memless nodes.
 	 */
-	for (cnode = 0; cnode < numionodes; cnode++) {
+	for (cnode = 0; cnode < num_cnodes; cnode++) {
 		hubdev_init_node(nodepdaindr[cnode], cnode);
 	}
 }
@@ -553,87 +673,58 @@ void __init sn_cpu_init(void)
 }
 
 /*
- * Scan klconfig for ionodes.  Add the nasids to the
- * physical_node_map and the pda and increment numionodes.
+ * Build tables for converting between NASIDs and cnodes.
  */
+static inline int __init board_needs_cnode(int type)
+{
+	return (type == KLTYPE_SNIA || type == KLTYPE_TIO);
+}
 
-static void __init scan_for_ionodes(void)
+void __init build_cnode_tables(void)
 {
-	int nasid = 0;
+	int nasid;
+	int node;
 	lboard_t *brd;
 
-	/* fakeprom does not support klgraph */
-	if (IS_RUNNING_ON_FAKE_PROM())
-		return;
-
-	/* Setup ionodes with memory */
-	for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) {
-		char *klgraph_header;
-		cnodeid_t cnodeid;
-
-		if (physical_node_map[nasid] == -1)
-			continue;
+	memset(physical_node_map, -1, sizeof(physical_node_map));
+	memset(sn_cnodeid_to_nasid, -1,
+			sizeof(__ia64_per_cpu_var(__sn_cnodeid_to_nasid)));
 
-		cnodeid = -1;
-		klgraph_header = __va(ia64_sn_get_klconfig_addr(nasid));
-		if (!klgraph_header) {
-			BUG();	/* All nodes must have klconfig tables! */
-		}
-		cnodeid = nasid_to_cnodeid(nasid);
-		root_lboard[cnodeid] = (lboard_t *)
-		    NODE_OFFSET_TO_LBOARD((nasid),
-					  ((kl_config_hdr_t
-					    *) (klgraph_header))->
-					  ch_board_info);
+	/*
+	 * First populate the tables with C/M bricks. This ensures that
+	 * cnode == node for all C & M bricks.
+	 */
+	for_each_online_node(node) {
+		nasid = pxm_to_nasid(nid_to_pxm_map[node]);
+		sn_cnodeid_to_nasid[node] = nasid;
+		physical_node_map[nasid] = node;
 	}
 
-	/* Scan headless/memless IO Nodes. */
-	for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) {
-		/* if there's no nasid, don't try to read the klconfig on the node */
-		if (physical_node_map[nasid] == -1)
-			continue;
-		brd = find_lboard_any((lboard_t *)
-				      root_lboard[nasid_to_cnodeid(nasid)],
-				      KLTYPE_SNIA);
-		if (brd) {
-			brd = KLCF_NEXT_ANY(brd);	/* Skip this node's lboard */
-			if (!brd)
-				continue;
-		}
-
-		brd = find_lboard_any(brd, KLTYPE_SNIA);
+	/*
+	 * num_cnodes is total number of C/M/TIO bricks. Because of the 256 node
+	 * limit on the number of nodes, we can't use the generic node numbers 
+	 * for this. Note that num_cnodes is incremented below as TIOs or
+	 * headless/memoryless nodes are discovered.
+	 */
+	num_cnodes = num_online_nodes();
 
-		while (brd) {
-			sn_cnodeid_to_nasid[numionodes] = brd->brd_nasid;
-			physical_node_map[brd->brd_nasid] = numionodes;
-			root_lboard[numionodes] = brd;
-			numionodes++;
-			brd = KLCF_NEXT_ANY(brd);
-			if (!brd)
-				break;
-
-			brd = find_lboard_any(brd, KLTYPE_SNIA);
-		}
-	}
+	/* fakeprom does not support klgraph */
+	if (IS_RUNNING_ON_FAKE_PROM())
+		return;
 
-	/* Scan for TIO nodes. */
-	for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) {
-		/* if there's no nasid, don't try to read the klconfig on the node */
-		if (physical_node_map[nasid] == -1)
-			continue;
-		brd = find_lboard_any((lboard_t *)
-				      root_lboard[nasid_to_cnodeid(nasid)],
-				      KLTYPE_TIO);
+	/* Find TIOs & headless/memoryless nodes and add them to the tables */
+	for_each_online_node(node) {
+		kl_config_hdr_t *klgraph_header;
+		nasid = cnodeid_to_nasid(node);
+		if ((klgraph_header = ia64_sn_get_klconfig_addr(nasid)) == NULL)
+			BUG();
+		brd = NODE_OFFSET_TO_LBOARD(nasid, klgraph_header->ch_board_info);
 		while (brd) {
-			sn_cnodeid_to_nasid[numionodes] = brd->brd_nasid;
-			physical_node_map[brd->brd_nasid] = numionodes;
-			root_lboard[numionodes] = brd;
-			numionodes++;
-			brd = KLCF_NEXT_ANY(brd);
-			if (!brd)
-				break;
-
-			brd = find_lboard_any(brd, KLTYPE_TIO);
+			if (board_needs_cnode(brd->brd_type) && physical_node_map[brd->brd_nasid] < 0) {
+				sn_cnodeid_to_nasid[num_cnodes] = brd->brd_nasid;
+				physical_node_map[brd->brd_nasid] = num_cnodes++;
+			}
+			brd = find_lboard_next(brd);
 		}
 	}
 }
diff --git a/arch/ia64/sn/kernel/sn2/sn2_smp.c b/arch/ia64/sn/kernel/sn2/sn2_smp.c
index 0a4ee50c302f..5d54f5f4e926 100644
--- a/arch/ia64/sn/kernel/sn2/sn2_smp.c
+++ b/arch/ia64/sn/kernel/sn2/sn2_smp.c
@@ -177,6 +177,7 @@ void sn_tlb_migrate_finish(struct mm_struct *mm)
 
 /**
  * sn2_global_tlb_purge - globally purge translation cache of virtual address range
+ * @mm: mm_struct containing virtual address range
  * @start: start of virtual address range
  * @end: end of virtual address range
  * @nbits: specifies number of bytes to purge per instruction (num = 1<<(nbits & 0xfc))
@@ -188,21 +189,22 @@ void sn_tlb_migrate_finish(struct mm_struct *mm)
  * 	- cpu_vm_mask is a bit mask that indicates which cpus have loaded the context.
  * 	- cpu_vm_mask is converted into a nodemask of the nodes containing the
  * 	  cpus in cpu_vm_mask.
- *	- if only one bit is set in cpu_vm_mask & it is the current cpu,
- *	  then only the local TLB needs to be flushed. This flushing can be done
- *	  using ptc.l. This is the common case & avoids the global spinlock.
+ *	- if only one bit is set in cpu_vm_mask & it is the current cpu & the
+ *	  process is purging its own virtual address range, then only the
+ *	  local TLB needs to be flushed. This flushing can be done using
+ *	  ptc.l. This is the common case & avoids the global spinlock.
  *	- if multiple cpus have loaded the context, then flushing has to be
  *	  done with ptc.g/MMRs under protection of the global ptc_lock.
  */
 
 void
-sn2_global_tlb_purge(unsigned long start, unsigned long end,
-		     unsigned long nbits)
+sn2_global_tlb_purge(struct mm_struct *mm, unsigned long start,
+		     unsigned long end, unsigned long nbits)
 {
 	int i, opt, shub1, cnode, mynasid, cpu, lcpu = 0, nasid, flushed = 0;
+	int mymm = (mm == current->active_mm);
 	volatile unsigned long *ptc0, *ptc1;
-	unsigned long itc, itc2, flags, data0 = 0, data1 = 0;
-	struct mm_struct *mm = current->active_mm;
+	unsigned long itc, itc2, flags, data0 = 0, data1 = 0, rr_value;
 	short nasids[MAX_NUMNODES], nix;
 	nodemask_t nodes_flushed;
 
@@ -216,9 +218,12 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end,
 		i++;
 	}
 
+	if (i == 0)
+		return;
+
 	preempt_disable();
 
-	if (likely(i == 1 && lcpu == smp_processor_id())) {
+	if (likely(i == 1 && lcpu == smp_processor_id() && mymm)) {
 		do {
 			ia64_ptcl(start, nbits << 2);
 			start += (1UL << nbits);
@@ -229,7 +234,7 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end,
 		return;
 	}
 
-	if (atomic_read(&mm->mm_users) == 1) {
+	if (atomic_read(&mm->mm_users) == 1 && mymm) {
 		flush_tlb_mm(mm);
 		__get_cpu_var(ptcstats).change_rid++;
 		preempt_enable();
@@ -241,11 +246,13 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end,
 	for_each_node_mask(cnode, nodes_flushed)
 		nasids[nix++] = cnodeid_to_nasid(cnode);
 
+	rr_value = (mm->context << 3) | REGION_NUMBER(start);
+
 	shub1 = is_shub1();
 	if (shub1) {
 		data0 = (1UL << SH1_PTC_0_A_SHFT) |
 		    	(nbits << SH1_PTC_0_PS_SHFT) |
-		    	((ia64_get_rr(start) >> 8) << SH1_PTC_0_RID_SHFT) |
+			(rr_value << SH1_PTC_0_RID_SHFT) |
 		    	(1UL << SH1_PTC_0_START_SHFT);
 		ptc0 = (long *)GLOBAL_MMR_PHYS_ADDR(0, SH1_PTC_0);
 		ptc1 = (long *)GLOBAL_MMR_PHYS_ADDR(0, SH1_PTC_1);
@@ -254,7 +261,7 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end,
 			(nbits << SH2_PTC_PS_SHFT) |
 		    	(1UL << SH2_PTC_START_SHFT);
 		ptc0 = (long *)GLOBAL_MMR_PHYS_ADDR(0, SH2_PTC + 
-			((ia64_get_rr(start) >> 8) << SH2_PTC_RID_SHFT) );
+			(rr_value << SH2_PTC_RID_SHFT));
 		ptc1 = NULL;
 	}
 	
@@ -275,7 +282,7 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end,
 			data0 = (data0 & ~SH2_PTC_ADDR_MASK) | (start & SH2_PTC_ADDR_MASK);
 		for (i = 0; i < nix; i++) {
 			nasid = nasids[i];
-			if ((!(sn2_ptctest & 3)) && unlikely(nasid == mynasid)) {
+			if ((!(sn2_ptctest & 3)) && unlikely(nasid == mynasid && mymm)) {
 				ia64_ptcga(start, nbits << 2);
 				ia64_srlz_i();
 			} else {
@@ -485,6 +492,9 @@ static struct proc_dir_entry *proc_sn2_ptc;
 
 static int __init sn2_ptc_init(void)
 {
+	if (!ia64_platform_is("sn2"))
+		return -ENOSYS;
+
 	if (!(proc_sn2_ptc = create_proc_entry(PTC_BASENAME, 0444, NULL))) {
 		printk(KERN_ERR "unable to create %s proc entry", PTC_BASENAME);
 		return -EINVAL;
diff --git a/arch/ia64/sn/kernel/sn2/sn_hwperf.c b/arch/ia64/sn/kernel/sn2/sn_hwperf.c
index 0513aacac8c1..19b54fbcd7ea 100644
--- a/arch/ia64/sn/kernel/sn2/sn_hwperf.c
+++ b/arch/ia64/sn/kernel/sn2/sn_hwperf.c
@@ -476,8 +476,8 @@ static int sn_topology_show(struct seq_file *s, void *d)
 				for_each_online_cpu(j) {
 					seq_printf(s, j ? ":%d" : ", dist %d",
 						node_distance(
-						    cpuid_to_cnodeid(i),
-						    cpuid_to_cnodeid(j)));
+						    cpu_to_node(i),
+						    cpu_to_node(j)));
 				}
 				seq_putc(s, '\n');
 			}
@@ -743,13 +743,14 @@ sn_hwperf_ioctl(struct inode *in, struct file *fp, u32 op, u64 arg)
 		if ((r = sn_hwperf_enum_objects(&nobj, &objs)) == 0) {
 			memset(p, 0, a.sz);
 			for (i = 0; i < nobj; i++) {
+				int cpuobj_index = 0;
 				if (!SN_HWPERF_IS_NODE(objs + i))
 					continue;
 				node = sn_hwperf_obj_to_cnode(objs + i);
 				for_each_online_cpu(j) {
 					if (node != cpu_to_node(j))
 						continue;
-					cpuobj = (struct sn_hwperf_object_info *) p + j;
+					cpuobj = (struct sn_hwperf_object_info *) p + cpuobj_index++;
 					slice = 'a' + cpuid_to_slice(j);
 					cdata = cpu_data(j);
 					cpuobj->id = j;
diff --git a/arch/ia64/sn/kernel/tiocx.c b/arch/ia64/sn/kernel/tiocx.c
index b45db5133f55..0d8592a745a7 100644
--- a/arch/ia64/sn/kernel/tiocx.c
+++ b/arch/ia64/sn/kernel/tiocx.c
@@ -183,11 +183,12 @@ int cx_driver_unregister(struct cx_drv *cx_driver)
  * @part_num: device's part number
  * @mfg_num: device's manufacturer number
  * @hubdev: hub info associated with this device
+ * @bt: board type of the device
  *
  */
 int
 cx_device_register(nasid_t nasid, int part_num, int mfg_num,
-		   struct hubdev_info *hubdev)
+		   struct hubdev_info *hubdev, int bt)
 {
 	struct cx_dev *cx_dev;
 
@@ -200,6 +201,7 @@ cx_device_register(nasid_t nasid, int part_num, int mfg_num,
 	cx_dev->cx_id.mfg_num = mfg_num;
 	cx_dev->cx_id.nasid = nasid;
 	cx_dev->hubdev = hubdev;
+	cx_dev->bt = bt;
 
 	cx_dev->dev.parent = NULL;
 	cx_dev->dev.bus = &tiocx_bus_type;
@@ -238,7 +240,8 @@ static int cx_device_reload(struct cx_dev *cx_dev)
 {
 	cx_device_unregister(cx_dev);
 	return cx_device_register(cx_dev->cx_id.nasid, cx_dev->cx_id.part_num,
-				  cx_dev->cx_id.mfg_num, cx_dev->hubdev);
+				  cx_dev->cx_id.mfg_num, cx_dev->hubdev,
+				  cx_dev->bt);
 }
 
 static inline uint64_t tiocx_intr_alloc(nasid_t nasid, int widget,
@@ -365,26 +368,20 @@ static void tio_corelet_reset(nasid_t nasid, int corelet)
 	udelay(2000);
 }
 
-static int tiocx_btchar_get(int nasid)
+static int is_fpga_tio(int nasid, int *bt)
 {
-	moduleid_t module_id;
-	geoid_t geoid;
-	int cnodeid;
-
-	cnodeid = nasid_to_cnodeid(nasid);
-	geoid = cnodeid_get_geoid(cnodeid);
-	module_id = geo_module(geoid);
-	return MODULE_GET_BTCHAR(module_id);
-}
+	int ioboard_type;
 
-static int is_fpga_brick(int nasid)
-{
-	switch (tiocx_btchar_get(nasid)) {
+	ioboard_type = ia64_sn_sysctl_ioboard_get(nasid);
+
+	switch (ioboard_type) {
 	case L1_BRICKTYPE_SA:
 	case L1_BRICKTYPE_ATHENA:
-	case L1_BRICKTYPE_DAYTONA:
+	case L1_BOARDTYPE_DAYTONA:
+		*bt = ioboard_type;
 		return 1;
 	}
+
 	return 0;
 }
 
@@ -407,16 +404,22 @@ static int tiocx_reload(struct cx_dev *cx_dev)
 
 	if (bitstream_loaded(nasid)) {
 		uint64_t cx_id;
-
-		cx_id =
-		    *(volatile uint64_t *)(TIO_SWIN_BASE(nasid, TIOCX_CORELET) +
+		int rv;
+
+		rv = ia64_sn_sysctl_tio_clock_reset(nasid);
+		if (rv) {
+			printk(KERN_ALERT "CX port JTAG reset failed.\n");
+		} else {
+			cx_id = *(volatile uint64_t *)
+				(TIO_SWIN_BASE(nasid, TIOCX_CORELET) +
 					  WIDGET_ID);
-		part_num = XWIDGET_PART_NUM(cx_id);
-		mfg_num = XWIDGET_MFG_NUM(cx_id);
-		DBG("part= 0x%x, mfg= 0x%x\n", part_num, mfg_num);
-		/* just ignore it if it's a CE */
-		if (part_num == TIO_CE_ASIC_PARTNUM)
-			return 0;
+			part_num = XWIDGET_PART_NUM(cx_id);
+			mfg_num = XWIDGET_MFG_NUM(cx_id);
+			DBG("part= 0x%x, mfg= 0x%x\n", part_num, mfg_num);
+			/* just ignore it if it's a CE */
+			if (part_num == TIO_CE_ASIC_PARTNUM)
+				return 0;
+		}
 	}
 
 	cx_dev->cx_id.part_num = part_num;
@@ -436,10 +439,10 @@ static ssize_t show_cxdev_control(struct device *dev, struct device_attribute *a
 {
 	struct cx_dev *cx_dev = to_cx_dev(dev);
 
-	return sprintf(buf, "0x%x 0x%x 0x%x %d\n",
+	return sprintf(buf, "0x%x 0x%x 0x%x 0x%x\n",
 		       cx_dev->cx_id.nasid,
 		       cx_dev->cx_id.part_num, cx_dev->cx_id.mfg_num,
-		       tiocx_btchar_get(cx_dev->cx_id.nasid));
+		       cx_dev->bt);
 }
 
 static ssize_t store_cxdev_control(struct device *dev, struct device_attribute *attr, const char *buf,
@@ -486,13 +489,13 @@ static int __init tiocx_init(void)
 
 	bus_register(&tiocx_bus_type);
 
-	for (cnodeid = 0; cnodeid < MAX_COMPACT_NODES; cnodeid++) {
+	for (cnodeid = 0; cnodeid < num_cnodes; cnodeid++) {
 		nasid_t nasid;
+		int bt;
 
-		if ((nasid = cnodeid_to_nasid(cnodeid)) < 0)
-			break;	/* No more nasids .. bail out of loop */
+		nasid = cnodeid_to_nasid(cnodeid);
 
-		if ((nasid & 0x1) && is_fpga_brick(nasid)) {
+		if ((nasid & 0x1) && is_fpga_tio(nasid, &bt)) {
 			struct hubdev_info *hubdev;
 			struct xwidget_info *widgetp;
 
@@ -512,7 +515,7 @@ static int __init tiocx_init(void)
 
 			if (cx_device_register
 			    (nasid, widgetp->xwi_hwid.part_num,
-			     widgetp->xwi_hwid.mfg_num, hubdev) < 0)
+			     widgetp->xwi_hwid.mfg_num, hubdev, bt) < 0)
 				return -ENXIO;
 			else
 				found_tiocx_device++;
diff --git a/arch/ia64/sn/kernel/xpc.h b/arch/ia64/sn/kernel/xpc.h
index d0ee635daf2e..5483a9f227d4 100644
--- a/arch/ia64/sn/kernel/xpc.h
+++ b/arch/ia64/sn/kernel/xpc.h
@@ -57,7 +57,7 @@
 #define XPC_NASID_FROM_W_B(_w, _b) (((_w) * 64 + (_b)) * 2)
 
 #define XPC_HB_DEFAULT_INTERVAL		5	/* incr HB every x secs */
-#define XPC_HB_CHECK_DEFAULT_TIMEOUT	20	/* check HB every x secs */
+#define XPC_HB_CHECK_DEFAULT_INTERVAL	20	/* check HB every x secs */
 
 /* define the process name of HB checker and the CPU it is pinned to */
 #define XPC_HB_CHECK_THREAD_NAME	"xpc_hb"
@@ -67,34 +67,82 @@
 #define XPC_DISCOVERY_THREAD_NAME	"xpc_discovery"
 
 
-#define XPC_HB_ALLOWED(_p, _v)	((_v)->heartbeating_to_mask & (1UL << (_p)))
-#define XPC_ALLOW_HB(_p, _v)	(_v)->heartbeating_to_mask |= (1UL << (_p))
-#define XPC_DISALLOW_HB(_p, _v)	(_v)->heartbeating_to_mask &= (~(1UL << (_p)))
-
-
 /*
- * Reserved Page provided by SAL.
+ * the reserved page
+ *
+ *   SAL reserves one page of memory per partition for XPC. Though a full page
+ *   in length (16384 bytes), its starting address is not page aligned, but it
+ *   is cacheline aligned. The reserved page consists of the following:
+ *
+ *   reserved page header
+ *
+ *     The first cacheline of the reserved page contains the header
+ *     (struct xpc_rsvd_page). Before SAL initialization has completed,
+ *     SAL has set up the following fields of the reserved page header:
+ *     SAL_signature, SAL_version, partid, and nasids_size. The other
+ *     fields are set up by XPC. (xpc_rsvd_page points to the local
+ *     partition's reserved page.)
  *
- * SAL provides one page per partition of reserved memory.  When SAL
- * initialization is complete, SAL_signature, SAL_version, partid,
- * part_nasids, and mach_nasids are set.
+ *   part_nasids mask
+ *   mach_nasids mask
+ *
+ *     SAL also sets up two bitmaps (or masks), one that reflects the actual
+ *     nasids in this partition (part_nasids), and the other that reflects
+ *     the actual nasids in the entire machine (mach_nasids). We're only
+ *     interested in the even numbered nasids (which contain the processors
+ *     and/or memory), so we only need half as many bits to represent the
+ *     nasids. The part_nasids mask is located starting at the first cacheline
+ *     following the reserved page header. The mach_nasids mask follows right
+ *     after the part_nasids mask. The size in bytes of each mask is reflected
+ *     by the reserved page header field 'nasids_size'. (Local partition's
+ *     mask pointers are xpc_part_nasids and xpc_mach_nasids.)
+ *
+ *   vars
+ *   vars part
+ *
+ *     Immediately following the mach_nasids mask are the XPC variables
+ *     required by other partitions. First are those that are generic to all
+ *     partitions (vars), followed on the next available cacheline by those
+ *     which are partition specific (vars part). These are setup by XPC.
+ *     (Local partition's vars pointers are xpc_vars and xpc_vars_part.)
  *
  * Note: Until vars_pa is set, the partition XPC code has not been initialized.
  */
 struct xpc_rsvd_page {
-	u64 SAL_signature;	/* SAL unique signature */
-	u64 SAL_version;	/* SAL specified version */
-	u8 partid;		/* partition ID from SAL */
+	u64 SAL_signature;	/* SAL: unique signature */
+	u64 SAL_version;	/* SAL: version */
+	u8 partid;		/* SAL: partition ID */
 	u8 version;
-	u8 pad[6];		/* pad to u64 align */
+	u8 pad1[6];		/* align to next u64 in cacheline */
 	volatile u64 vars_pa;
-	u64 part_nasids[XP_NASID_MASK_WORDS] ____cacheline_aligned;
-	u64 mach_nasids[XP_NASID_MASK_WORDS] ____cacheline_aligned;
+	struct timespec stamp;	/* time when reserved page was setup by XPC */
+	u64 pad2[9];		/* align to last u64 in cacheline */
+	u64 nasids_size;	/* SAL: size of each nasid mask in bytes */
 };
-#define XPC_RP_VERSION _XPC_VERSION(1,0) /* version 1.0 of the reserved page */
 
-#define XPC_RSVD_PAGE_ALIGNED_SIZE \
-			(L1_CACHE_ALIGN(sizeof(struct xpc_rsvd_page)))
+#define XPC_RP_VERSION _XPC_VERSION(1,1) /* version 1.1 of the reserved page */
+
+#define XPC_SUPPORTS_RP_STAMP(_version) \
+			(_version >= _XPC_VERSION(1,1))
+
+/*
+ * compare stamps - the return value is:
+ *
+ *	< 0,	if stamp1 < stamp2
+ *	= 0,	if stamp1 == stamp2
+ *	> 0,	if stamp1 > stamp2
+ */
+static inline int
+xpc_compare_stamps(struct timespec *stamp1, struct timespec *stamp2)
+{
+	int ret;
+
+
+	if ((ret = stamp1->tv_sec - stamp2->tv_sec) == 0) {
+		ret = stamp1->tv_nsec - stamp2->tv_nsec;
+	}
+	return ret;
+}
 
 
 /*
@@ -115,17 +163,64 @@ struct xpc_vars {
 	u8 version;
 	u64 heartbeat;
 	u64 heartbeating_to_mask;
-	u64 kdb_status;		/* 0 = machine running */
+	u64 heartbeat_offline;	/* if 0, heartbeat should be changing */
 	int act_nasid;
 	int act_phys_cpuid;
 	u64 vars_part_pa;
 	u64 amos_page_pa;	/* paddr of page of AMOs from MSPEC driver */
 	AMO_t *amos_page;	/* vaddr of page of AMOs from MSPEC driver */
-	AMO_t *act_amos;	/* pointer to the first activation AMO */
 };
-#define XPC_V_VERSION _XPC_VERSION(3,0) /* version 3.0 of the cross vars */
 
-#define XPC_VARS_ALIGNED_SIZE  (L1_CACHE_ALIGN(sizeof(struct xpc_vars)))
+#define XPC_V_VERSION _XPC_VERSION(3,1) /* version 3.1 of the cross vars */
+
+#define XPC_SUPPORTS_DISENGAGE_REQUEST(_version) \
+			(_version >= _XPC_VERSION(3,1))
+
+
+static inline int
+xpc_hb_allowed(partid_t partid, struct xpc_vars *vars)
+{
+	return ((vars->heartbeating_to_mask & (1UL << partid)) != 0);
+}
+
+static inline void
+xpc_allow_hb(partid_t partid, struct xpc_vars *vars)
+{
+	u64 old_mask, new_mask;
+
+	do {
+		old_mask = vars->heartbeating_to_mask;
+		new_mask = (old_mask | (1UL << partid));
+	} while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) !=
+							old_mask);
+}
+
+static inline void
+xpc_disallow_hb(partid_t partid, struct xpc_vars *vars)
+{
+	u64 old_mask, new_mask;
+
+	do {
+		old_mask = vars->heartbeating_to_mask;
+		new_mask = (old_mask & ~(1UL << partid));
+	} while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) !=
+							old_mask);
+}
+
+
+/*
+ * The AMOs page consists of a number of AMO variables which are divided into
+ * four groups, The first two groups are used to identify an IRQ's sender.
+ * These two groups consist of 64 and 128 AMO variables respectively. The last
+ * two groups, consisting of just one AMO variable each, are used to identify
+ * the remote partitions that are currently engaged (from the viewpoint of
+ * the XPC running on the remote partition).
+ */
+#define XPC_NOTIFY_IRQ_AMOS	   0
+#define XPC_ACTIVATE_IRQ_AMOS	   (XPC_NOTIFY_IRQ_AMOS + XP_MAX_PARTITIONS)
+#define XPC_ENGAGED_PARTITIONS_AMO (XPC_ACTIVATE_IRQ_AMOS + XP_NASID_MASK_WORDS)
+#define XPC_DISENGAGE_REQUEST_AMO  (XPC_ENGAGED_PARTITIONS_AMO + 1)
+
 
 /*
  * The following structure describes the per partition specific variables.
@@ -165,6 +260,16 @@ struct xpc_vars_part {
 #define XPC_VP_MAGIC2	0x0073726176435058L  /* 'XPCvars\0'L (little endian) */
 
 
+/* the reserved page sizes and offsets */
+
+#define XPC_RP_HEADER_SIZE	L1_CACHE_ALIGN(sizeof(struct xpc_rsvd_page))
+#define XPC_RP_VARS_SIZE 	L1_CACHE_ALIGN(sizeof(struct xpc_vars))
+
+#define XPC_RP_PART_NASIDS(_rp) (u64 *) ((u8 *) _rp + XPC_RP_HEADER_SIZE)
+#define XPC_RP_MACH_NASIDS(_rp) (XPC_RP_PART_NASIDS(_rp) + xp_nasid_mask_words)
+#define XPC_RP_VARS(_rp)	((struct xpc_vars *) XPC_RP_MACH_NASIDS(_rp) + xp_nasid_mask_words)
+#define XPC_RP_VARS_PART(_rp)	(struct xpc_vars_part *) ((u8 *) XPC_RP_VARS(rp) + XPC_RP_VARS_SIZE)
+
 
 /*
  * Functions registered by add_timer() or called by kernel_thread() only
@@ -349,6 +454,9 @@ struct xpc_channel {
 	atomic_t n_on_msg_allocate_wq;   /* #on msg allocation wait queue */
 	wait_queue_head_t msg_allocate_wq; /* msg allocation wait queue */
 
+	u8 delayed_IPI_flags;		/* IPI flags received, but delayed */
+					/* action until channel disconnected */
+
 	/* queue of msg senders who want to be notified when msg received */
 
 	atomic_t n_to_notify;		/* #of msg senders to notify */
@@ -358,7 +466,7 @@ struct xpc_channel {
 	void *key;			/* pointer to user's key */
 
 	struct semaphore msg_to_pull_sema; /* next msg to pull serialization */
-	struct semaphore teardown_sema;    /* wait for teardown completion */
+	struct semaphore wdisconnect_sema; /* wait for channel disconnect */
 
 	struct xpc_openclose_args *local_openclose_args; /* args passed on */
 					/* opening or closing of channel */
@@ -410,6 +518,8 @@ struct xpc_channel {
 
 #define	XPC_C_DISCONNECTED	0x00002000 /* channel is disconnected */
 #define	XPC_C_DISCONNECTING	0x00004000 /* channel is being disconnected */
+#define	XPC_C_DISCONNECTCALLOUT	0x00008000 /* chan disconnected callout made */
+#define	XPC_C_WDISCONNECT	0x00010000 /* waiting for channel disconnect */
 
 
 
@@ -422,6 +532,8 @@ struct xpc_partition {
 
 	/* XPC HB infrastructure */
 
+	u8 remote_rp_version;		/* version# of partition's rsvd pg */
+	struct timespec remote_rp_stamp;/* time when rsvd pg was initialized */
 	u64 remote_rp_pa;		/* phys addr of partition's rsvd pg */
 	u64 remote_vars_pa;		/* phys addr of partition's vars */
 	u64 remote_vars_part_pa;	/* phys addr of partition's vars part */
@@ -432,14 +544,18 @@ struct xpc_partition {
 	u32 act_IRQ_rcvd;		/* IRQs since activation */
 	spinlock_t act_lock;		/* protect updating of act_state */
 	u8 act_state;			/* from XPC HB viewpoint */
+	u8 remote_vars_version;		/* version# of partition's vars */
 	enum xpc_retval reason;		/* reason partition is deactivating */
 	int reason_line;		/* line# deactivation initiated from */
 	int reactivate_nasid;		/* nasid in partition to reactivate */
 
+	unsigned long disengage_request_timeout; /* timeout in jiffies */
+	struct timer_list disengage_request_timer;
+
 
 	/* XPC infrastructure referencing and teardown control */
 
-	volatile u8 setup_state;			/* infrastructure setup state */
+	volatile u8 setup_state;	/* infrastructure setup state */
 	wait_queue_head_t teardown_wq;	/* kthread waiting to teardown infra */
 	atomic_t references;		/* #of references to infrastructure */
 
@@ -454,6 +570,7 @@ struct xpc_partition {
 
 	u8 nchannels;		   /* #of defined channels supported */
 	atomic_t nchannels_active; /* #of channels that are not DISCONNECTED */
+	atomic_t nchannels_engaged;/* #of channels engaged with remote part */
 	struct xpc_channel *channels;/* array of channel structures */
 
 	void *local_GPs_base;	  /* base address of kmalloc'd space */
@@ -518,6 +635,7 @@ struct xpc_partition {
 #define XPC_P_TORNDOWN		0x03	/* infrastructure is torndown */
 
 
+
 /*
  * struct xpc_partition IPI_timer #of seconds to wait before checking for
  * dropped IPIs. These occur whenever an IPI amo write doesn't complete until
@@ -526,6 +644,13 @@ struct xpc_partition {
 #define XPC_P_DROPPED_IPI_WAIT	(0.25 * HZ)
 
 
+/* number of seconds to wait for other partitions to disengage */
+#define XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT	90
+
+/* interval in seconds to print 'waiting disengagement' messages */
+#define XPC_DISENGAGE_PRINTMSG_INTERVAL		10
+
+
 #define XPC_PARTID(_p)	((partid_t) ((_p) - &xpc_partitions[0]))
 
 
@@ -534,24 +659,20 @@ struct xpc_partition {
 extern struct xpc_registration xpc_registrations[];
 
 
-/* >>> found in xpc_main.c only */
+/* found in xpc_main.c */
 extern struct device *xpc_part;
 extern struct device *xpc_chan;
+extern int xpc_disengage_request_timelimit;
 extern irqreturn_t xpc_notify_IRQ_handler(int, void *, struct pt_regs *);
 extern void xpc_dropped_IPI_check(struct xpc_partition *);
+extern void xpc_activate_partition(struct xpc_partition *);
 extern void xpc_activate_kthreads(struct xpc_channel *, int);
 extern void xpc_create_kthreads(struct xpc_channel *, int);
 extern void xpc_disconnect_wait(int);
 
 
-/* found in xpc_main.c and efi-xpc.c */
-extern void xpc_activate_partition(struct xpc_partition *);
-
-
 /* found in xpc_partition.c */
 extern int xpc_exiting;
-extern int xpc_hb_interval;
-extern int xpc_hb_check_interval;
 extern struct xpc_vars *xpc_vars;
 extern struct xpc_rsvd_page *xpc_rsvd_page;
 extern struct xpc_vars_part *xpc_vars_part;
@@ -561,6 +682,7 @@ extern struct xpc_rsvd_page *xpc_rsvd_page_init(void);
 extern void xpc_allow_IPI_ops(void);
 extern void xpc_restrict_IPI_ops(void);
 extern int xpc_identify_act_IRQ_sender(void);
+extern int xpc_partition_disengaged(struct xpc_partition *);
 extern enum xpc_retval xpc_mark_partition_active(struct xpc_partition *);
 extern void xpc_mark_partition_inactive(struct xpc_partition *);
 extern void xpc_discovery(void);
@@ -585,8 +707,8 @@ extern void xpc_connected_callout(struct xpc_channel *);
 extern void xpc_deliver_msg(struct xpc_channel *);
 extern void xpc_disconnect_channel(const int, struct xpc_channel *,
 					enum xpc_retval, unsigned long *);
-extern void xpc_disconnected_callout(struct xpc_channel *);
-extern void xpc_partition_down(struct xpc_partition *, enum xpc_retval);
+extern void xpc_disconnecting_callout(struct xpc_channel *);
+extern void xpc_partition_going_down(struct xpc_partition *, enum xpc_retval);
 extern void xpc_teardown_infrastructure(struct xpc_partition *);
 
 
@@ -674,6 +796,157 @@ xpc_part_ref(struct xpc_partition *part)
 
 
 /*
+ * This next set of inlines are used to keep track of when a partition is
+ * potentially engaged in accessing memory belonging to another partition.
+ */
+
+static inline void
+xpc_mark_partition_engaged(struct xpc_partition *part)
+{
+	unsigned long irq_flags;
+	AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa +
+				(XPC_ENGAGED_PARTITIONS_AMO * sizeof(AMO_t)));
+
+
+	local_irq_save(irq_flags);
+
+	/* set bit corresponding to our partid in remote partition's AMO */
+	FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_OR,
+						(1UL << sn_partition_id));
+	/*
+	 * We must always use the nofault function regardless of whether we
+	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+	 * didn't, we'd never know that the other partition is down and would
+	 * keep sending IPIs and AMOs to it until the heartbeat times out.
+	 */
+	(void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo->
+				variable), xp_nofault_PIOR_target));
+
+	local_irq_restore(irq_flags);
+}
+
+static inline void
+xpc_mark_partition_disengaged(struct xpc_partition *part)
+{
+	unsigned long irq_flags;
+	AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa +
+				(XPC_ENGAGED_PARTITIONS_AMO * sizeof(AMO_t)));
+
+
+	local_irq_save(irq_flags);
+
+	/* clear bit corresponding to our partid in remote partition's AMO */
+	FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND,
+						~(1UL << sn_partition_id));
+	/*
+	 * We must always use the nofault function regardless of whether we
+	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+	 * didn't, we'd never know that the other partition is down and would
+	 * keep sending IPIs and AMOs to it until the heartbeat times out.
+	 */
+	(void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo->
+				variable), xp_nofault_PIOR_target));
+
+	local_irq_restore(irq_flags);
+}
+
+static inline void
+xpc_request_partition_disengage(struct xpc_partition *part)
+{
+	unsigned long irq_flags;
+	AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa +
+				(XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t)));
+
+
+	local_irq_save(irq_flags);
+
+	/* set bit corresponding to our partid in remote partition's AMO */
+	FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_OR,
+						(1UL << sn_partition_id));
+	/*
+	 * We must always use the nofault function regardless of whether we
+	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+	 * didn't, we'd never know that the other partition is down and would
+	 * keep sending IPIs and AMOs to it until the heartbeat times out.
+	 */
+	(void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo->
+				variable), xp_nofault_PIOR_target));
+
+	local_irq_restore(irq_flags);
+}
+
+static inline void
+xpc_cancel_partition_disengage_request(struct xpc_partition *part)
+{
+	unsigned long irq_flags;
+	AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa +
+				(XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t)));
+
+
+	local_irq_save(irq_flags);
+
+	/* clear bit corresponding to our partid in remote partition's AMO */
+	FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND,
+						~(1UL << sn_partition_id));
+	/*
+	 * We must always use the nofault function regardless of whether we
+	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+	 * didn't, we'd never know that the other partition is down and would
+	 * keep sending IPIs and AMOs to it until the heartbeat times out.
+	 */
+	(void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo->
+				variable), xp_nofault_PIOR_target));
+
+	local_irq_restore(irq_flags);
+}
+
+static inline u64
+xpc_partition_engaged(u64 partid_mask)
+{
+	AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO;
+
+
+	/* return our partition's AMO variable ANDed with partid_mask */
+	return (FETCHOP_LOAD_OP(TO_AMO((u64) &amo->variable), FETCHOP_LOAD) &
+								partid_mask);
+}
+
+static inline u64
+xpc_partition_disengage_requested(u64 partid_mask)
+{
+	AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO;
+
+
+	/* return our partition's AMO variable ANDed with partid_mask */
+	return (FETCHOP_LOAD_OP(TO_AMO((u64) &amo->variable), FETCHOP_LOAD) &
+								partid_mask);
+}
+
+static inline void
+xpc_clear_partition_engaged(u64 partid_mask)
+{
+	AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO;
+
+
+	/* clear bit(s) based on partid_mask in our partition's AMO */
+	FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND,
+								~partid_mask);
+}
+
+static inline void
+xpc_clear_partition_disengage_request(u64 partid_mask)
+{
+	AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO;
+
+
+	/* clear bit(s) based on partid_mask in our partition's AMO */
+	FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND,
+								~partid_mask);
+}
+
+
+
+/*
  * The following set of macros and inlines are used for the sending and
  * receiving of IPIs (also known as IRQs). There are two flavors of IPIs,
  * one that is associated with partition activity (SGI_XPC_ACTIVATE) and
@@ -722,13 +995,13 @@ xpc_IPI_send(AMO_t *amo, u64 flag, int nasid, int phys_cpuid, int vector)
  * Flag the appropriate AMO variable and send an IPI to the specified node.
  */
 static inline void
-xpc_activate_IRQ_send(u64 amos_page, int from_nasid, int to_nasid,
+xpc_activate_IRQ_send(u64 amos_page_pa, int from_nasid, int to_nasid,
 			int to_phys_cpuid)
 {
 	int w_index = XPC_NASID_W_INDEX(from_nasid);
 	int b_index = XPC_NASID_B_INDEX(from_nasid);
-	AMO_t *amos = (AMO_t *) __va(amos_page +
-					(XP_MAX_PARTITIONS * sizeof(AMO_t)));
+	AMO_t *amos = (AMO_t *) __va(amos_page_pa +
+				(XPC_ACTIVATE_IRQ_AMOS * sizeof(AMO_t)));
 
 
 	(void) xpc_IPI_send(&amos[w_index], (1UL << b_index), to_nasid,
@@ -756,6 +1029,13 @@ xpc_IPI_send_reactivate(struct xpc_partition *part)
 				xpc_vars->act_nasid, xpc_vars->act_phys_cpuid);
 }
 
+static inline void
+xpc_IPI_send_disengage(struct xpc_partition *part)
+{
+	xpc_activate_IRQ_send(part->remote_amos_page_pa, cnodeid_to_nasid(0),
+			part->remote_act_nasid, part->remote_act_phys_cpuid);
+}
+
 
 /*
  * IPIs associated with SGI_XPC_NOTIFY IRQ.
@@ -836,6 +1116,7 @@ xpc_notify_IRQ_send_local(struct xpc_channel *ch, u8 ipi_flag,
 
 /* given an AMO variable and a channel#, get its associated IPI flags */
 #define XPC_GET_IPI_FLAGS(_amo, _c)	((u8) (((_amo) >> ((_c) * 8)) & 0xff))
+#define XPC_SET_IPI_FLAGS(_amo, _c, _f)	(_amo) |= ((u64) (_f) << ((_c) * 8))
 
 #define	XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(_amo) ((_amo) & 0x0f0f0f0f0f0f0f0f)
 #define XPC_ANY_MSG_IPI_FLAGS_SET(_amo)       ((_amo) & 0x1010101010101010)
@@ -903,17 +1184,18 @@ xpc_IPI_send_local_msgrequest(struct xpc_channel *ch)
  * cacheable mapping for the entire region. This will prevent speculative
  * reading of cached copies of our lines from being issued which will cause
  * a PI FSB Protocol error to be generated by the SHUB. For XPC, we need 64
- * (XP_MAX_PARTITIONS) AMO variables for message notification (xpc_main.c)
- * and an additional 16 AMO variables for partition activation (xpc_hb.c).
+ * AMO variables (based on XP_MAX_PARTITIONS) for message notification and an
+ * additional 128 AMO variables (based on XP_NASID_MASK_WORDS) for partition
+ * activation and 2 AMO variables for partition deactivation.
  */
 static inline AMO_t *
-xpc_IPI_init(partid_t partid)
+xpc_IPI_init(int index)
 {
-	AMO_t *part_amo = xpc_vars->amos_page + partid;
+	AMO_t *amo = xpc_vars->amos_page + index;
 
 
-	xpc_IPI_receive(part_amo);
-	return part_amo;
+	(void) xpc_IPI_receive(amo);	/* clear AMO variable */
+	return amo;
 }
 
 
@@ -939,7 +1221,7 @@ xpc_map_bte_errors(bte_result_t error)
 
 
 static inline void *
-xpc_kmalloc_cacheline_aligned(size_t size, int flags, void **base)
+xpc_kmalloc_cacheline_aligned(size_t size, gfp_t flags, void **base)
 {
 	/* see if kmalloc will give us cachline aligned memory by default */
 	*base = kmalloc(size, flags);
diff --git a/arch/ia64/sn/kernel/xpc_channel.c b/arch/ia64/sn/kernel/xpc_channel.c
index 94698bea7be0..abf4fc2a87bb 100644
--- a/arch/ia64/sn/kernel/xpc_channel.c
+++ b/arch/ia64/sn/kernel/xpc_channel.c
@@ -57,6 +57,7 @@ xpc_initialize_channels(struct xpc_partition *part, partid_t partid)
 
 		spin_lock_init(&ch->lock);
 		sema_init(&ch->msg_to_pull_sema, 1);	/* mutex */
+		sema_init(&ch->wdisconnect_sema, 0);	/* event wait */
 
 		atomic_set(&ch->n_on_msg_allocate_wq, 0);
 		init_waitqueue_head(&ch->msg_allocate_wq);
@@ -166,6 +167,7 @@ xpc_setup_infrastructure(struct xpc_partition *part)
 	xpc_initialize_channels(part, partid);
 
 	atomic_set(&part->nchannels_active, 0);
+	atomic_set(&part->nchannels_engaged, 0);
 
 
 	/* local_IPI_amo were set to 0 by an earlier memset() */
@@ -555,8 +557,6 @@ xpc_allocate_msgqueues(struct xpc_channel *ch)
 		sema_init(&ch->notify_queue[i].sema, 0);
 	}
 
-	sema_init(&ch->teardown_sema, 0);	/* event wait */
-
 	spin_lock_irqsave(&ch->lock, irq_flags);
 	ch->flags |= XPC_C_SETUP;
 	spin_unlock_irqrestore(&ch->lock, irq_flags);
@@ -626,6 +626,55 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags)
 
 
 /*
+ * Notify those who wanted to be notified upon delivery of their message.
+ */
+static void
+xpc_notify_senders(struct xpc_channel *ch, enum xpc_retval reason, s64 put)
+{
+	struct xpc_notify *notify;
+	u8 notify_type;
+	s64 get = ch->w_remote_GP.get - 1;
+
+
+	while (++get < put && atomic_read(&ch->n_to_notify) > 0) {
+
+		notify = &ch->notify_queue[get % ch->local_nentries];
+
+		/*
+		 * See if the notify entry indicates it was associated with
+		 * a message who's sender wants to be notified. It is possible
+		 * that it is, but someone else is doing or has done the
+		 * notification.
+		 */
+		notify_type = notify->type;
+		if (notify_type == 0 ||
+				cmpxchg(&notify->type, notify_type, 0) !=
+								notify_type) {
+			continue;
+		}
+
+		DBUG_ON(notify_type != XPC_N_CALL);
+
+		atomic_dec(&ch->n_to_notify);
+
+		if (notify->func != NULL) {
+			dev_dbg(xpc_chan, "notify->func() called, notify=0x%p, "
+				"msg_number=%ld, partid=%d, channel=%d\n",
+				(void *) notify, get, ch->partid, ch->number);
+
+			notify->func(reason, ch->partid, ch->number,
+								notify->key);
+
+			dev_dbg(xpc_chan, "notify->func() returned, "
+				"notify=0x%p, msg_number=%ld, partid=%d, "
+				"channel=%d\n", (void *) notify, get,
+				ch->partid, ch->number);
+		}
+	}
+}
+
+
+/*
  * Free up message queues and other stuff that were allocated for the specified
  * channel.
  *
@@ -669,9 +718,6 @@ xpc_free_msgqueues(struct xpc_channel *ch)
 		ch->remote_msgqueue = NULL;
 		kfree(ch->notify_queue);
 		ch->notify_queue = NULL;
-
-		/* in case someone is waiting for the teardown to complete */
-		up(&ch->teardown_sema);
 	}
 }
 
@@ -683,7 +729,7 @@ static void
 xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
 {
 	struct xpc_partition *part = &xpc_partitions[ch->partid];
-	u32 ch_flags = ch->flags;
+	u32 channel_was_connected = (ch->flags & XPC_C_WASCONNECTED);
 
 
 	DBUG_ON(!spin_is_locked(&ch->lock));
@@ -701,12 +747,13 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
 	}
 	DBUG_ON(atomic_read(&ch->kthreads_assigned) != 0);
 
-	/* it's now safe to free the channel's message queues */
-
-	xpc_free_msgqueues(ch);
-	DBUG_ON(ch->flags & XPC_C_SETUP);
+	if (part->act_state == XPC_P_DEACTIVATING) {
+		/* can't proceed until the other side disengages from us */
+		if (xpc_partition_engaged(1UL << ch->partid)) {
+			return;
+		}
 
-	if (part->act_state != XPC_P_DEACTIVATING) {
+	} else {
 
 		/* as long as the other side is up do the full protocol */
 
@@ -724,16 +771,42 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
 		}
 	}
 
+	/* wake those waiting for notify completion */
+	if (atomic_read(&ch->n_to_notify) > 0) {
+		/* >>> we do callout while holding ch->lock */
+		xpc_notify_senders(ch, ch->reason, ch->w_local_GP.put);
+	}
+
 	/* both sides are disconnected now */
 
-	ch->flags = XPC_C_DISCONNECTED;	/* clear all flags, but this one */
+	/* it's now safe to free the channel's message queues */
+	xpc_free_msgqueues(ch);
+
+	/* mark disconnected, clear all other flags except XPC_C_WDISCONNECT */
+	ch->flags = (XPC_C_DISCONNECTED | (ch->flags & XPC_C_WDISCONNECT));
 
 	atomic_dec(&part->nchannels_active);
 
-	if (ch_flags & XPC_C_WASCONNECTED) {
+	if (channel_was_connected) {
 		dev_info(xpc_chan, "channel %d to partition %d disconnected, "
 			"reason=%d\n", ch->number, ch->partid, ch->reason);
 	}
+
+	if (ch->flags & XPC_C_WDISCONNECT) {
+		spin_unlock_irqrestore(&ch->lock, *irq_flags);
+		up(&ch->wdisconnect_sema);
+		spin_lock_irqsave(&ch->lock, *irq_flags);
+
+	} else if (ch->delayed_IPI_flags) {
+		if (part->act_state != XPC_P_DEACTIVATING) {
+			/* time to take action on any delayed IPI flags */
+			spin_lock(&part->IPI_lock);
+			XPC_SET_IPI_FLAGS(part->local_IPI_amo, ch->number,
+							ch->delayed_IPI_flags);
+			spin_unlock(&part->IPI_lock);
+		}
+		ch->delayed_IPI_flags = 0;
+	}
 }
 
 
@@ -754,6 +827,19 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
 
 	spin_lock_irqsave(&ch->lock, irq_flags);
 
+again:
+
+	if ((ch->flags & XPC_C_DISCONNECTED) &&
+					(ch->flags & XPC_C_WDISCONNECT)) {
+		/*
+		 * Delay processing IPI flags until thread waiting disconnect
+		 * has had a chance to see that the channel is disconnected.
+		 */
+		ch->delayed_IPI_flags |= IPI_flags;
+		spin_unlock_irqrestore(&ch->lock, irq_flags);
+		return;
+	}
+
 
 	if (IPI_flags & XPC_IPI_CLOSEREQUEST) {
 
@@ -764,7 +850,7 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
 		/*
 		 * If RCLOSEREQUEST is set, we're probably waiting for
 		 * RCLOSEREPLY. We should find it and a ROPENREQUEST packed
-		 * with this RCLOSEQREUQEST in the IPI_flags.
+		 * with this RCLOSEREQUEST in the IPI_flags.
 		 */
 
 		if (ch->flags & XPC_C_RCLOSEREQUEST) {
@@ -779,14 +865,22 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
 
 			/* both sides have finished disconnecting */
 			xpc_process_disconnect(ch, &irq_flags);
+			DBUG_ON(!(ch->flags & XPC_C_DISCONNECTED));
+			goto again;
 		}
 
 		if (ch->flags & XPC_C_DISCONNECTED) {
-			// >>> explain this section
-
 			if (!(IPI_flags & XPC_IPI_OPENREQUEST)) {
-				DBUG_ON(part->act_state !=
-							XPC_P_DEACTIVATING);
+				if ((XPC_GET_IPI_FLAGS(part->local_IPI_amo,
+					 ch_number) & XPC_IPI_OPENREQUEST)) {
+
+					DBUG_ON(ch->delayed_IPI_flags != 0);
+					spin_lock(&part->IPI_lock);
+					XPC_SET_IPI_FLAGS(part->local_IPI_amo,
+							ch_number,
+							XPC_IPI_CLOSEREQUEST);
+					spin_unlock(&part->IPI_lock);
+				}
 				spin_unlock_irqrestore(&ch->lock, irq_flags);
 				return;
 			}
@@ -816,9 +910,13 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
 			}
 
 			XPC_DISCONNECT_CHANNEL(ch, reason, &irq_flags);
-		} else {
-			xpc_process_disconnect(ch, &irq_flags);
+
+			DBUG_ON(IPI_flags & XPC_IPI_CLOSEREPLY);
+			spin_unlock_irqrestore(&ch->lock, irq_flags);
+			return;
 		}
+
+		xpc_process_disconnect(ch, &irq_flags);
 	}
 
 
@@ -834,7 +932,20 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
 		}
 
 		DBUG_ON(!(ch->flags & XPC_C_CLOSEREQUEST));
-		DBUG_ON(!(ch->flags & XPC_C_RCLOSEREQUEST));
+
+		if (!(ch->flags & XPC_C_RCLOSEREQUEST)) {
+			if ((XPC_GET_IPI_FLAGS(part->local_IPI_amo, ch_number)
+						& XPC_IPI_CLOSEREQUEST)) {
+
+				DBUG_ON(ch->delayed_IPI_flags != 0);
+				spin_lock(&part->IPI_lock);
+				XPC_SET_IPI_FLAGS(part->local_IPI_amo,
+						ch_number, XPC_IPI_CLOSEREPLY);
+				spin_unlock(&part->IPI_lock);
+			}
+			spin_unlock_irqrestore(&ch->lock, irq_flags);
+			return;
+		}
 
 		ch->flags |= XPC_C_RCLOSEREPLY;
 
@@ -852,8 +963,14 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
 			"channel=%d\n", args->msg_size, args->local_nentries,
 			ch->partid, ch->number);
 
-		if ((ch->flags & XPC_C_DISCONNECTING) ||
-					part->act_state == XPC_P_DEACTIVATING) {
+		if (part->act_state == XPC_P_DEACTIVATING ||
+					(ch->flags & XPC_C_ROPENREQUEST)) {
+			spin_unlock_irqrestore(&ch->lock, irq_flags);
+			return;
+		}
+
+		if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_WDISCONNECT)) {
+			ch->delayed_IPI_flags |= XPC_IPI_OPENREQUEST;
 			spin_unlock_irqrestore(&ch->lock, irq_flags);
 			return;
 		}
@@ -867,8 +984,11 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
 		 *      msg_size = size of channel's messages in bytes
 		 *      local_nentries = remote partition's local_nentries
 		 */
-		DBUG_ON(args->msg_size == 0);
-		DBUG_ON(args->local_nentries == 0);
+		if (args->msg_size == 0 || args->local_nentries == 0) {
+			/* assume OPENREQUEST was delayed by mistake */
+			spin_unlock_irqrestore(&ch->lock, irq_flags);
+			return;
+		}
 
 		ch->flags |= (XPC_C_ROPENREQUEST | XPC_C_CONNECTING);
 		ch->remote_nentries = args->local_nentries;
@@ -906,7 +1026,13 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
 			spin_unlock_irqrestore(&ch->lock, irq_flags);
 			return;
 		}
-		DBUG_ON(!(ch->flags & XPC_C_OPENREQUEST));
+		if (!(ch->flags & XPC_C_OPENREQUEST)) {
+			XPC_DISCONNECT_CHANNEL(ch, xpcOpenCloseError,
+								&irq_flags);
+			spin_unlock_irqrestore(&ch->lock, irq_flags);
+			return;
+		}
+
 		DBUG_ON(!(ch->flags & XPC_C_ROPENREQUEST));
 		DBUG_ON(ch->flags & XPC_C_CONNECTED);
 
@@ -960,8 +1086,8 @@ xpc_connect_channel(struct xpc_channel *ch)
 	struct xpc_registration *registration = &xpc_registrations[ch->number];
 
 
-	if (down_interruptible(&registration->sema) != 0) {
-		return xpcInterrupted;
+	if (down_trylock(&registration->sema) != 0) {
+		return xpcRetry;
 	}
 
 	if (!XPC_CHANNEL_REGISTERED(ch->number)) {
@@ -1040,55 +1166,6 @@ xpc_connect_channel(struct xpc_channel *ch)
 
 
 /*
- * Notify those who wanted to be notified upon delivery of their message.
- */
-static void
-xpc_notify_senders(struct xpc_channel *ch, enum xpc_retval reason, s64 put)
-{
-	struct xpc_notify *notify;
-	u8 notify_type;
-	s64 get = ch->w_remote_GP.get - 1;
-
-
-	while (++get < put && atomic_read(&ch->n_to_notify) > 0) {
-
-		notify = &ch->notify_queue[get % ch->local_nentries];
-
-		/*
-		 * See if the notify entry indicates it was associated with
-		 * a message who's sender wants to be notified. It is possible
-		 * that it is, but someone else is doing or has done the
-		 * notification.
-		 */
-		notify_type = notify->type;
-		if (notify_type == 0 ||
-				cmpxchg(&notify->type, notify_type, 0) !=
-								notify_type) {
-			continue;
-		}
-
-		DBUG_ON(notify_type != XPC_N_CALL);
-
-		atomic_dec(&ch->n_to_notify);
-
-		if (notify->func != NULL) {
-			dev_dbg(xpc_chan, "notify->func() called, notify=0x%p, "
-				"msg_number=%ld, partid=%d, channel=%d\n",
-				(void *) notify, get, ch->partid, ch->number);
-
-			notify->func(reason, ch->partid, ch->number,
-								notify->key);
-
-			dev_dbg(xpc_chan, "notify->func() returned, "
-				"notify=0x%p, msg_number=%ld, partid=%d, "
-				"channel=%d\n", (void *) notify, get,
-				ch->partid, ch->number);
-		}
-	}
-}
-
-
-/*
  * Clear some of the msg flags in the local message queue.
  */
 static inline void
@@ -1240,6 +1317,7 @@ xpc_process_channel_activity(struct xpc_partition *part)
 	u64 IPI_amo, IPI_flags;
 	struct xpc_channel *ch;
 	int ch_number;
+	u32 ch_flags;
 
 
 	IPI_amo = xpc_get_IPI_flags(part);
@@ -1266,8 +1344,9 @@ xpc_process_channel_activity(struct xpc_partition *part)
 			xpc_process_openclose_IPI(part, ch_number, IPI_flags);
 		}
 
+		ch_flags = ch->flags;	/* need an atomic snapshot of flags */
 
-		if (ch->flags & XPC_C_DISCONNECTING) {
+		if (ch_flags & XPC_C_DISCONNECTING) {
 			spin_lock_irqsave(&ch->lock, irq_flags);
 			xpc_process_disconnect(ch, &irq_flags);
 			spin_unlock_irqrestore(&ch->lock, irq_flags);
@@ -1278,9 +1357,9 @@ xpc_process_channel_activity(struct xpc_partition *part)
 			continue;
 		}
 
-		if (!(ch->flags & XPC_C_CONNECTED)) {
-			if (!(ch->flags & XPC_C_OPENREQUEST)) {
-				DBUG_ON(ch->flags & XPC_C_SETUP);
+		if (!(ch_flags & XPC_C_CONNECTED)) {
+			if (!(ch_flags & XPC_C_OPENREQUEST)) {
+				DBUG_ON(ch_flags & XPC_C_SETUP);
 				(void) xpc_connect_channel(ch);
 			} else {
 				spin_lock_irqsave(&ch->lock, irq_flags);
@@ -1305,8 +1384,8 @@ xpc_process_channel_activity(struct xpc_partition *part)
 
 
 /*
- * XPC's heartbeat code calls this function to inform XPC that a partition has
- * gone down.  XPC responds by tearing down the XPartition Communication
+ * XPC's heartbeat code calls this function to inform XPC that a partition is
+ * going down.  XPC responds by tearing down the XPartition Communication
  * infrastructure used for the just downed partition.
  *
  * XPC's heartbeat code will never call this function and xpc_partition_up()
@@ -1314,7 +1393,7 @@ xpc_process_channel_activity(struct xpc_partition *part)
  * at the same time.
  */
 void
-xpc_partition_down(struct xpc_partition *part, enum xpc_retval reason)
+xpc_partition_going_down(struct xpc_partition *part, enum xpc_retval reason)
 {
 	unsigned long irq_flags;
 	int ch_number;
@@ -1330,12 +1409,11 @@ xpc_partition_down(struct xpc_partition *part, enum xpc_retval reason)
 	}
 
 
-	/* disconnect all channels associated with the downed partition */
+	/* disconnect channels associated with the partition going down */
 
 	for (ch_number = 0; ch_number < part->nchannels; ch_number++) {
 		ch = &part->channels[ch_number];
 
-
 		xpc_msgqueue_ref(ch);
 		spin_lock_irqsave(&ch->lock, irq_flags);
 
@@ -1370,6 +1448,7 @@ xpc_teardown_infrastructure(struct xpc_partition *part)
 	 * this partition.
 	 */
 
+	DBUG_ON(atomic_read(&part->nchannels_engaged) != 0);
 	DBUG_ON(atomic_read(&part->nchannels_active) != 0);
 	DBUG_ON(part->setup_state != XPC_P_SETUP);
 	part->setup_state = XPC_P_WTEARDOWN;
@@ -1428,19 +1507,11 @@ xpc_initiate_connect(int ch_number)
 		if (xpc_part_ref(part)) {
 			ch = &part->channels[ch_number];
 
-			if (!(ch->flags & XPC_C_DISCONNECTING)) {
-				DBUG_ON(ch->flags & XPC_C_OPENREQUEST);
-				DBUG_ON(ch->flags & XPC_C_CONNECTED);
-				DBUG_ON(ch->flags & XPC_C_SETUP);
-
-				/*
-				 * Initiate the establishment of a connection
-				 * on the newly registered channel to the
-				 * remote partition.
-				 */
-				xpc_wakeup_channel_mgr(part);
-			}
-
+			/*
+			 * Initiate the establishment of a connection on the
+			 * newly registered channel to the remote partition.
+			 */
+			xpc_wakeup_channel_mgr(part);
 			xpc_part_deref(part);
 		}
 	}
@@ -1450,9 +1521,6 @@ xpc_initiate_connect(int ch_number)
 void
 xpc_connected_callout(struct xpc_channel *ch)
 {
-	unsigned long irq_flags;
-
-
 	/* let the registerer know that a connection has been established */
 
 	if (ch->func != NULL) {
@@ -1465,10 +1533,6 @@ xpc_connected_callout(struct xpc_channel *ch)
 		dev_dbg(xpc_chan, "ch->func() returned, reason=xpcConnected, "
 			"partid=%d, channel=%d\n", ch->partid, ch->number);
 	}
-
-	spin_lock_irqsave(&ch->lock, irq_flags);
-	ch->flags |= XPC_C_CONNECTCALLOUT;
-	spin_unlock_irqrestore(&ch->lock, irq_flags);
 }
 
 
@@ -1506,8 +1570,12 @@ xpc_initiate_disconnect(int ch_number)
 
 			spin_lock_irqsave(&ch->lock, irq_flags);
 
-			XPC_DISCONNECT_CHANNEL(ch, xpcUnregistering,
+			if (!(ch->flags & XPC_C_DISCONNECTED)) {
+				ch->flags |= XPC_C_WDISCONNECT;
+
+				XPC_DISCONNECT_CHANNEL(ch, xpcUnregistering,
 								&irq_flags);
+			}
 
 			spin_unlock_irqrestore(&ch->lock, irq_flags);
 
@@ -1523,8 +1591,9 @@ xpc_initiate_disconnect(int ch_number)
 /*
  * To disconnect a channel, and reflect it back to all who may be waiting.
  *
- * >>> An OPEN is not allowed until XPC_C_DISCONNECTING is cleared by
- * >>> xpc_free_msgqueues().
+ * An OPEN is not allowed until XPC_C_DISCONNECTING is cleared by
+ * xpc_process_disconnect(), and if set, XPC_C_WDISCONNECT is cleared by
+ * xpc_disconnect_wait().
  *
  * THE CHANNEL IS TO BE LOCKED BY THE CALLER AND WILL REMAIN LOCKED UPON RETURN.
  */
@@ -1532,7 +1601,7 @@ void
 xpc_disconnect_channel(const int line, struct xpc_channel *ch,
 			enum xpc_retval reason, unsigned long *irq_flags)
 {
-	u32 flags;
+	u32 channel_was_connected = (ch->flags & XPC_C_CONNECTED);
 
 
 	DBUG_ON(!spin_is_locked(&ch->lock));
@@ -1547,61 +1616,53 @@ xpc_disconnect_channel(const int line, struct xpc_channel *ch,
 
 	XPC_SET_REASON(ch, reason, line);
 
-	flags = ch->flags;
+	ch->flags |= (XPC_C_CLOSEREQUEST | XPC_C_DISCONNECTING);
 	/* some of these may not have been set */
 	ch->flags &= ~(XPC_C_OPENREQUEST | XPC_C_OPENREPLY |
 			XPC_C_ROPENREQUEST | XPC_C_ROPENREPLY |
 			XPC_C_CONNECTING | XPC_C_CONNECTED);
 
-	ch->flags |= (XPC_C_CLOSEREQUEST | XPC_C_DISCONNECTING);
 	xpc_IPI_send_closerequest(ch, irq_flags);
 
-	if (flags & XPC_C_CONNECTED) {
+	if (channel_was_connected) {
 		ch->flags |= XPC_C_WASCONNECTED;
 	}
 
+	spin_unlock_irqrestore(&ch->lock, *irq_flags);
+
+	/* wake all idle kthreads so they can exit */
 	if (atomic_read(&ch->kthreads_idle) > 0) {
-		/* wake all idle kthreads so they can exit */
 		wake_up_all(&ch->idle_wq);
 	}
 
-	spin_unlock_irqrestore(&ch->lock, *irq_flags);
-
-
 	/* wake those waiting to allocate an entry from the local msg queue */
-
 	if (atomic_read(&ch->n_on_msg_allocate_wq) > 0) {
 		wake_up(&ch->msg_allocate_wq);
 	}
 
-	/* wake those waiting for notify completion */
-
-	if (atomic_read(&ch->n_to_notify) > 0) {
-		xpc_notify_senders(ch, reason, ch->w_local_GP.put);
-	}
-
 	spin_lock_irqsave(&ch->lock, *irq_flags);
 }
 
 
 void
-xpc_disconnected_callout(struct xpc_channel *ch)
+xpc_disconnecting_callout(struct xpc_channel *ch)
 {
 	/*
-	 * Let the channel's registerer know that the channel is now
+	 * Let the channel's registerer know that the channel is being
 	 * disconnected. We don't want to do this if the registerer was never
-	 * informed of a connection being made, unless the disconnect was for
-	 * abnormal reasons.
+	 * informed of a connection being made.
 	 */
 
 	if (ch->func != NULL) {
-		dev_dbg(xpc_chan, "ch->func() called, reason=%d, partid=%d, "
-			"channel=%d\n", ch->reason, ch->partid, ch->number);
+		dev_dbg(xpc_chan, "ch->func() called, reason=xpcDisconnecting,"
+			" partid=%d, channel=%d\n", ch->partid, ch->number);
 
-		ch->func(ch->reason, ch->partid, ch->number, NULL, ch->key);
+		ch->func(xpcDisconnecting, ch->partid, ch->number, NULL,
+								ch->key);
 
-		dev_dbg(xpc_chan, "ch->func() returned, reason=%d, partid=%d, "
-			"channel=%d\n", ch->reason, ch->partid, ch->number);
+		dev_dbg(xpc_chan, "ch->func() returned, reason="
+			"xpcDisconnecting, partid=%d, channel=%d\n",
+			ch->partid, ch->number);
 	}
 }
 
@@ -1848,7 +1909,7 @@ xpc_send_msg(struct xpc_channel *ch, struct xpc_msg *msg, u8 notify_type,
 			xpc_notify_func func, void *key)
 {
 	enum xpc_retval ret = xpcSuccess;
-	struct xpc_notify *notify = NULL;   // >>> to keep the compiler happy!!
+	struct xpc_notify *notify = notify;
 	s64 put, msg_number = msg->number;
 
 
diff --git a/arch/ia64/sn/kernel/xpc_main.c b/arch/ia64/sn/kernel/xpc_main.c
index ed7c21586e98..b617236524c6 100644
--- a/arch/ia64/sn/kernel/xpc_main.c
+++ b/arch/ia64/sn/kernel/xpc_main.c
@@ -54,8 +54,10 @@
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/reboot.h>
 #include <asm/sn/intr.h>
 #include <asm/sn/sn_sal.h>
+#include <asm/kdebug.h>
 #include <asm/uaccess.h>
 #include "xpc.h"
 
@@ -82,11 +84,17 @@ struct device *xpc_chan = &xpc_chan_dbg_subname;
 
 /* systune related variables for /proc/sys directories */
 
-static int xpc_hb_min = 1;
-static int xpc_hb_max = 10;
+static int xpc_hb_interval = XPC_HB_DEFAULT_INTERVAL;
+static int xpc_hb_min_interval = 1;
+static int xpc_hb_max_interval = 10;
 
-static int xpc_hb_check_min = 10;
-static int xpc_hb_check_max = 120;
+static int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_INTERVAL;
+static int xpc_hb_check_min_interval = 10;
+static int xpc_hb_check_max_interval = 120;
+
+int xpc_disengage_request_timelimit = XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT;
+static int xpc_disengage_request_min_timelimit = 0;
+static int xpc_disengage_request_max_timelimit = 120;
 
 static ctl_table xpc_sys_xpc_hb_dir[] = {
 	{
@@ -99,7 +107,8 @@ static ctl_table xpc_sys_xpc_hb_dir[] = {
 		&proc_dointvec_minmax,
 		&sysctl_intvec,
 		NULL,
-		&xpc_hb_min, &xpc_hb_max
+		&xpc_hb_min_interval,
+		&xpc_hb_max_interval
 	},
 	{
 		2,
@@ -111,7 +120,8 @@ static ctl_table xpc_sys_xpc_hb_dir[] = {
 		&proc_dointvec_minmax,
 		&sysctl_intvec,
 		NULL,
-		&xpc_hb_check_min, &xpc_hb_check_max
+		&xpc_hb_check_min_interval,
+		&xpc_hb_check_max_interval
 	},
 	{0}
 };
@@ -124,6 +134,19 @@ static ctl_table xpc_sys_xpc_dir[] = {
 		0555,
 		xpc_sys_xpc_hb_dir
 	},
+	{
+		2,
+		"disengage_request_timelimit",
+		&xpc_disengage_request_timelimit,
+		sizeof(int),
+		0644,
+		NULL,
+		&proc_dointvec_minmax,
+		&sysctl_intvec,
+		NULL,
+		&xpc_disengage_request_min_timelimit,
+		&xpc_disengage_request_max_timelimit
+	},
 	{0}
 };
 static ctl_table xpc_sys_dir[] = {
@@ -148,10 +171,10 @@ static DECLARE_WAIT_QUEUE_HEAD(xpc_act_IRQ_wq);
 
 static unsigned long xpc_hb_check_timeout;
 
-/* xpc_hb_checker thread exited notification */
+/* notification that the xpc_hb_checker thread has exited */
 static DECLARE_MUTEX_LOCKED(xpc_hb_checker_exited);
 
-/* xpc_discovery thread exited notification */
+/* notification that the xpc_discovery thread has exited */
 static DECLARE_MUTEX_LOCKED(xpc_discovery_exited);
 
 
@@ -161,6 +184,35 @@ static struct timer_list xpc_hb_timer;
 static void xpc_kthread_waitmsgs(struct xpc_partition *, struct xpc_channel *);
 
 
+static int xpc_system_reboot(struct notifier_block *, unsigned long, void *);
+static struct notifier_block xpc_reboot_notifier = {
+	.notifier_call = xpc_system_reboot,
+};
+
+static int xpc_system_die(struct notifier_block *, unsigned long, void *);
+static struct notifier_block xpc_die_notifier = {
+	.notifier_call = xpc_system_die,
+};
+
+
+/*
+ * Timer function to enforce the timelimit on the partition disengage request.
+ */
+static void
+xpc_timeout_partition_disengage_request(unsigned long data)
+{
+	struct xpc_partition *part = (struct xpc_partition *) data;
+
+
+	DBUG_ON(jiffies < part->disengage_request_timeout);
+
+	(void) xpc_partition_disengaged(part);
+
+	DBUG_ON(part->disengage_request_timeout != 0);
+	DBUG_ON(xpc_partition_engaged(1UL << XPC_PARTID(part)) != 0);
+}
+
+
 /*
  * Notify the heartbeat check thread that an IRQ has been received.
  */
@@ -214,12 +266,6 @@ xpc_hb_checker(void *ignore)
 
 	while (!(volatile int) xpc_exiting) {
 
-		/* wait for IRQ or timeout */
-		(void) wait_event_interruptible(xpc_act_IRQ_wq,
-			    (last_IRQ_count < atomic_read(&xpc_act_IRQ_rcvd) ||
-					jiffies >= xpc_hb_check_timeout ||
-						(volatile int) xpc_exiting));
-
 		dev_dbg(xpc_part, "woke up with %d ticks rem; %d IRQs have "
 			"been received\n",
 			(int) (xpc_hb_check_timeout - jiffies),
@@ -240,6 +286,7 @@ xpc_hb_checker(void *ignore)
 		}
 
 
+		/* check for outstanding IRQs */
 		new_IRQ_count = atomic_read(&xpc_act_IRQ_rcvd);
 		if (last_IRQ_count < new_IRQ_count || force_IRQ != 0) {
 			force_IRQ = 0;
@@ -257,12 +304,18 @@ xpc_hb_checker(void *ignore)
 			xpc_hb_check_timeout = jiffies +
 					   (xpc_hb_check_interval * HZ);
 		}
+
+		/* wait for IRQ or timeout */
+		(void) wait_event_interruptible(xpc_act_IRQ_wq,
+			    (last_IRQ_count < atomic_read(&xpc_act_IRQ_rcvd) ||
+					jiffies >= xpc_hb_check_timeout ||
+						(volatile int) xpc_exiting));
 	}
 
 	dev_dbg(xpc_part, "heartbeat checker is exiting\n");
 
 
-	/* mark this thread as inactive */
+	/* mark this thread as having exited */
 	up(&xpc_hb_checker_exited);
 	return 0;
 }
@@ -282,7 +335,7 @@ xpc_initiate_discovery(void *ignore)
 
 	dev_dbg(xpc_part, "discovery thread is exiting\n");
 
-	/* mark this thread as inactive */
+	/* mark this thread as having exited */
 	up(&xpc_discovery_exited);
 	return 0;
 }
@@ -309,7 +362,7 @@ xpc_make_first_contact(struct xpc_partition *part)
 			"partition %d\n", XPC_PARTID(part));
 
 		/* wait a 1/4 of a second or so */
-		msleep_interruptible(250);
+		(void) msleep_interruptible(250);
 
 		if (part->act_state == XPC_P_DEACTIVATING) {
 			return part->reason;
@@ -336,7 +389,8 @@ static void
 xpc_channel_mgr(struct xpc_partition *part)
 {
 	while (part->act_state != XPC_P_DEACTIVATING ||
-				atomic_read(&part->nchannels_active) > 0) {
+			atomic_read(&part->nchannels_active) > 0 ||
+					!xpc_partition_disengaged(part)) {
 
 		xpc_process_channel_activity(part);
 
@@ -360,7 +414,8 @@ xpc_channel_mgr(struct xpc_partition *part)
 				(volatile u64) part->local_IPI_amo != 0 ||
 				((volatile u8) part->act_state ==
 							XPC_P_DEACTIVATING &&
-				atomic_read(&part->nchannels_active) == 0)));
+				atomic_read(&part->nchannels_active) == 0 &&
+				xpc_partition_disengaged(part))));
 		atomic_set(&part->channel_mgr_requests, 1);
 
 		// >>> Does it need to wakeup periodically as well? In case we
@@ -482,7 +537,7 @@ xpc_activating(void *__partid)
 		return 0;
 	}
 
-	XPC_ALLOW_HB(partid, xpc_vars);
+	xpc_allow_hb(partid, xpc_vars);
 	xpc_IPI_send_activated(part);
 
 
@@ -492,6 +547,7 @@ xpc_activating(void *__partid)
 	 */
 	(void) xpc_partition_up(part);
 
+	xpc_disallow_hb(partid, xpc_vars);
 	xpc_mark_partition_inactive(part);
 
 	if (part->reason == xpcReactivating) {
@@ -670,6 +726,7 @@ xpc_daemonize_kthread(void *args)
 	struct xpc_partition *part = &xpc_partitions[partid];
 	struct xpc_channel *ch;
 	int n_needed;
+	unsigned long irq_flags;
 
 
 	daemonize("xpc%02dc%d", partid, ch_number);
@@ -680,11 +737,14 @@ xpc_daemonize_kthread(void *args)
 	ch = &part->channels[ch_number];
 
 	if (!(ch->flags & XPC_C_DISCONNECTING)) {
-		DBUG_ON(!(ch->flags & XPC_C_CONNECTED));
 
 		/* let registerer know that connection has been established */
 
-		if (atomic_read(&ch->kthreads_assigned) == 1) {
+		spin_lock_irqsave(&ch->lock, irq_flags);
+		if (!(ch->flags & XPC_C_CONNECTCALLOUT)) {
+			ch->flags |= XPC_C_CONNECTCALLOUT;
+			spin_unlock_irqrestore(&ch->lock, irq_flags);
+
 			xpc_connected_callout(ch);
 
 			/*
@@ -699,16 +759,28 @@ xpc_daemonize_kthread(void *args)
 					!(ch->flags & XPC_C_DISCONNECTING)) {
 				xpc_activate_kthreads(ch, n_needed);
 			}
+		} else {
+			spin_unlock_irqrestore(&ch->lock, irq_flags);
 		}
 
 		xpc_kthread_waitmsgs(part, ch);
 	}
 
-	if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
-			((ch->flags & XPC_C_CONNECTCALLOUT) ||
-				(ch->reason != xpcUnregistering &&
-					ch->reason != xpcOtherUnregistering))) {
-		xpc_disconnected_callout(ch);
+	if (atomic_dec_return(&ch->kthreads_assigned) == 0) {
+		spin_lock_irqsave(&ch->lock, irq_flags);
+		if ((ch->flags & XPC_C_CONNECTCALLOUT) &&
+				!(ch->flags & XPC_C_DISCONNECTCALLOUT)) {
+			ch->flags |= XPC_C_DISCONNECTCALLOUT;
+			spin_unlock_irqrestore(&ch->lock, irq_flags);
+
+			xpc_disconnecting_callout(ch);
+		} else {
+			spin_unlock_irqrestore(&ch->lock, irq_flags);
+		}
+		if (atomic_dec_return(&part->nchannels_engaged) == 0) {
+			xpc_mark_partition_disengaged(part);
+			xpc_IPI_send_disengage(part);
+		}
 	}
 
 
@@ -740,12 +812,33 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed)
 	unsigned long irq_flags;
 	pid_t pid;
 	u64 args = XPC_PACK_ARGS(ch->partid, ch->number);
+	struct xpc_partition *part = &xpc_partitions[ch->partid];
 
 
 	while (needed-- > 0) {
+
+		/*
+		 * The following is done on behalf of the newly created
+		 * kthread. That kthread is responsible for doing the
+		 * counterpart to the following before it exits.
+		 */
+		(void) xpc_part_ref(part);
+		xpc_msgqueue_ref(ch);
+		if (atomic_inc_return(&ch->kthreads_assigned) == 1 &&
+		    atomic_inc_return(&part->nchannels_engaged) == 1) {
+			xpc_mark_partition_engaged(part);
+		}
+
 		pid = kernel_thread(xpc_daemonize_kthread, (void *) args, 0);
 		if (pid < 0) {
 			/* the fork failed */
+			if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
+			    atomic_dec_return(&part->nchannels_engaged) == 0) {
+				xpc_mark_partition_disengaged(part);
+				xpc_IPI_send_disengage(part);
+			}
+			xpc_msgqueue_deref(ch);
+			xpc_part_deref(part);
 
 			if (atomic_read(&ch->kthreads_assigned) <
 						ch->kthreads_idle_limit) {
@@ -765,14 +858,6 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed)
 			break;
 		}
 
-		/*
-		 * The following is done on behalf of the newly created
-		 * kthread. That kthread is responsible for doing the
-		 * counterpart to the following before it exits.
-		 */
-		(void) xpc_part_ref(&xpc_partitions[ch->partid]);
-		xpc_msgqueue_ref(ch);
-		atomic_inc(&ch->kthreads_assigned);
 		ch->kthreads_created++;	// >>> temporary debug only!!!
 	}
 }
@@ -781,87 +866,145 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed)
 void
 xpc_disconnect_wait(int ch_number)
 {
+	unsigned long irq_flags;
 	partid_t partid;
 	struct xpc_partition *part;
 	struct xpc_channel *ch;
+	int wakeup_channel_mgr;
 
 
 	/* now wait for all callouts to the caller's function to cease */
 	for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
 		part = &xpc_partitions[partid];
 
-		if (xpc_part_ref(part)) {
-			ch = &part->channels[ch_number];
+		if (!xpc_part_ref(part)) {
+			continue;
+		}
 
-// >>> how do we keep from falling into the window between our check and going
-// >>> down and coming back up where sema is re-inited?
-			if (ch->flags & XPC_C_SETUP) {
-				(void) down(&ch->teardown_sema);
-			}
+		ch = &part->channels[ch_number];
 
+		if (!(ch->flags & XPC_C_WDISCONNECT)) {
 			xpc_part_deref(part);
+			continue;
+		}
+
+		(void) down(&ch->wdisconnect_sema);
+
+		spin_lock_irqsave(&ch->lock, irq_flags);
+		DBUG_ON(!(ch->flags & XPC_C_DISCONNECTED));
+		wakeup_channel_mgr = 0;
+
+		if (ch->delayed_IPI_flags) {
+			if (part->act_state != XPC_P_DEACTIVATING) {
+				spin_lock(&part->IPI_lock);
+				XPC_SET_IPI_FLAGS(part->local_IPI_amo,
+					ch->number, ch->delayed_IPI_flags);
+				spin_unlock(&part->IPI_lock);
+				wakeup_channel_mgr = 1;
+			}
+			ch->delayed_IPI_flags = 0;
 		}
+
+		ch->flags &= ~XPC_C_WDISCONNECT;
+		spin_unlock_irqrestore(&ch->lock, irq_flags);
+
+		if (wakeup_channel_mgr) {
+			xpc_wakeup_channel_mgr(part);
+		}
+
+		xpc_part_deref(part);
 	}
 }
 
 
 static void
-xpc_do_exit(void)
+xpc_do_exit(enum xpc_retval reason)
 {
 	partid_t partid;
 	int active_part_count;
 	struct xpc_partition *part;
+	unsigned long printmsg_time;
 
 
-	/* now it's time to eliminate our heartbeat */
-	del_timer_sync(&xpc_hb_timer);
-	xpc_vars->heartbeating_to_mask = 0;
-
-	/* indicate to others that our reserved page is uninitialized */
-	xpc_rsvd_page->vars_pa = 0;
-
-	/*
-	 * Ignore all incoming interrupts. Without interupts the heartbeat
-	 * checker won't activate any new partitions that may come up.
-	 */
-	free_irq(SGI_XPC_ACTIVATE, NULL);
+	/* a 'rmmod XPC' and a 'reboot' cannot both end up here together */
+	DBUG_ON(xpc_exiting == 1);
 
 	/*
-	 * Cause the heartbeat checker and the discovery threads to exit.
-	 * We don't want them attempting to activate new partitions as we
-	 * try to deactivate the existing ones.
+	 * Let the heartbeat checker thread and the discovery thread
+	 * (if one is running) know that they should exit. Also wake up
+	 * the heartbeat checker thread in case it's sleeping.
 	 */
 	xpc_exiting = 1;
 	wake_up_interruptible(&xpc_act_IRQ_wq);
 
-	/* wait for the heartbeat checker thread to mark itself inactive */
-	down(&xpc_hb_checker_exited);
+	/* ignore all incoming interrupts */
+	free_irq(SGI_XPC_ACTIVATE, NULL);
 
-	/* wait for the discovery thread to mark itself inactive */
+	/* wait for the discovery thread to exit */
 	down(&xpc_discovery_exited);
 
+	/* wait for the heartbeat checker thread to exit */
+	down(&xpc_hb_checker_exited);
+
 
-	msleep_interruptible(300);
+	/* sleep for a 1/3 of a second or so */
+	(void) msleep_interruptible(300);
 
 
 	/* wait for all partitions to become inactive */
 
+	printmsg_time = jiffies;
+
 	do {
 		active_part_count = 0;
 
 		for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
 			part = &xpc_partitions[partid];
-			if (part->act_state != XPC_P_INACTIVE) {
-				active_part_count++;
 
-				XPC_DEACTIVATE_PARTITION(part, xpcUnloading);
+			if (xpc_partition_disengaged(part) &&
+					part->act_state == XPC_P_INACTIVE) {
+				continue;
 			}
+
+			active_part_count++;
+
+			XPC_DEACTIVATE_PARTITION(part, reason);
 		}
 
-		if (active_part_count)
-			msleep_interruptible(300);
-	} while (active_part_count > 0);
+		if (active_part_count == 0) {
+			break;
+		}
 
+		if (jiffies >= printmsg_time) {
+			dev_info(xpc_part, "waiting for partitions to "
+				"deactivate/disengage, active count=%d, remote "
+				"engaged=0x%lx\n", active_part_count,
+				xpc_partition_engaged(1UL << partid));
+
+			printmsg_time = jiffies +
+					(XPC_DISENGAGE_PRINTMSG_INTERVAL * HZ);
+		}
+
+		/* sleep for a 1/3 of a second or so */
+		(void) msleep_interruptible(300);
+
+	} while (1);
+
+	DBUG_ON(xpc_partition_engaged(-1UL));
+
+
+	/* indicate to others that our reserved page is uninitialized */
+	xpc_rsvd_page->vars_pa = 0;
+
+	/* now it's time to eliminate our heartbeat */
+	del_timer_sync(&xpc_hb_timer);
+	DBUG_ON(xpc_vars->heartbeating_to_mask != 0);
+
+	/* take ourselves off of the reboot_notifier_list */
+	(void) unregister_reboot_notifier(&xpc_reboot_notifier);
+
+	/* take ourselves off of the die_notifier list */
+	(void) unregister_die_notifier(&xpc_die_notifier);
 
 	/* close down protections for IPI operations */
 	xpc_restrict_IPI_ops();
@@ -876,6 +1019,118 @@ xpc_do_exit(void)
 }
 
 
+/*
+ * Called when the system is about to be either restarted or halted.
+ */
+static void
+xpc_die_disengage(void)
+{
+	struct xpc_partition *part;
+	partid_t partid;
+	unsigned long engaged;
+	long time, print_time, disengage_request_timeout;
+
+
+	/* keep xpc_hb_checker thread from doing anything (just in case) */
+	xpc_exiting = 1;
+
+	xpc_vars->heartbeating_to_mask = 0;  /* indicate we're deactivated */
+
+	for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
+		part = &xpc_partitions[partid];
+
+		if (!XPC_SUPPORTS_DISENGAGE_REQUEST(part->
+							remote_vars_version)) {
+
+			/* just in case it was left set by an earlier XPC */
+			xpc_clear_partition_engaged(1UL << partid);
+			continue;
+		}
+
+		if (xpc_partition_engaged(1UL << partid) ||
+					part->act_state != XPC_P_INACTIVE) {
+			xpc_request_partition_disengage(part);
+			xpc_mark_partition_disengaged(part);
+			xpc_IPI_send_disengage(part);
+		}
+	}
+
+	print_time = rtc_time();
+	disengage_request_timeout = print_time +
+		(xpc_disengage_request_timelimit * sn_rtc_cycles_per_second);
+
+	/* wait for all other partitions to disengage from us */
+
+	while ((engaged = xpc_partition_engaged(-1UL)) &&
+			(time = rtc_time()) < disengage_request_timeout) {
+
+		if (time >= print_time) {
+			dev_info(xpc_part, "waiting for remote partitions to "
+				"disengage, engaged=0x%lx\n", engaged);
+			print_time = time + (XPC_DISENGAGE_PRINTMSG_INTERVAL *
+						sn_rtc_cycles_per_second);
+		}
+	}
+	dev_info(xpc_part, "finished waiting for remote partitions to "
+				"disengage, engaged=0x%lx\n", engaged);
+}
+
+
+/*
+ * This function is called when the system is being rebooted.
+ */
+static int
+xpc_system_reboot(struct notifier_block *nb, unsigned long event, void *unused)
+{
+	enum xpc_retval reason;
+
+
+	switch (event) {
+	case SYS_RESTART:
+		reason = xpcSystemReboot;
+		break;
+	case SYS_HALT:
+		reason = xpcSystemHalt;
+		break;
+	case SYS_POWER_OFF:
+		reason = xpcSystemPoweroff;
+		break;
+	default:
+		reason = xpcSystemGoingDown;
+	}
+
+	xpc_do_exit(reason);
+	return NOTIFY_DONE;
+}
+
+
+/*
+ * This function is called when the system is being rebooted.
+ */
+static int
+xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused)
+{
+	switch (event) {
+	case DIE_MACHINE_RESTART:
+	case DIE_MACHINE_HALT:
+		xpc_die_disengage();
+		break;
+	case DIE_MCA_MONARCH_ENTER:
+	case DIE_INIT_MONARCH_ENTER:
+		xpc_vars->heartbeat++;
+		xpc_vars->heartbeat_offline = 1;
+		break;
+	case DIE_MCA_MONARCH_LEAVE:
+	case DIE_INIT_MONARCH_LEAVE:
+		xpc_vars->heartbeat++;
+		xpc_vars->heartbeat_offline = 0;
+		break;
+	}
+
+	return NOTIFY_DONE;
+}
+
+
 int __init
 xpc_init(void)
 {
@@ -891,11 +1146,11 @@ xpc_init(void)
 
 	/*
 	 * xpc_remote_copy_buffer is used as a temporary buffer for bte_copy'ng
-	 * both a partition's reserved page and its XPC variables. Its size was
-	 * based on the size of a reserved page. So we need to ensure that the
-	 * XPC variables will fit as well.
+	 * various portions of a partition's reserved page. Its size is based
+	 * on the size of the reserved page header and part_nasids mask. So we
+	 * need to ensure that the other items will fit as well.
 	 */
-	if (XPC_VARS_ALIGNED_SIZE > XPC_RSVD_PAGE_ALIGNED_SIZE) {
+	if (XPC_RP_VARS_SIZE > XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES) {
 		dev_err(xpc_part, "xpc_remote_copy_buffer is not big enough\n");
 		return -EPERM;
 	}
@@ -924,6 +1179,12 @@ xpc_init(void)
 		spin_lock_init(&part->act_lock);
 		part->act_state = XPC_P_INACTIVE;
 		XPC_SET_REASON(part, 0, 0);
+
+		init_timer(&part->disengage_request_timer);
+		part->disengage_request_timer.function =
+				xpc_timeout_partition_disengage_request;
+		part->disengage_request_timer.data = (unsigned long) part;
+
 		part->setup_state = XPC_P_UNSET;
 		init_waitqueue_head(&part->teardown_wq);
 		atomic_set(&part->references, 0);
@@ -980,6 +1241,19 @@ xpc_init(void)
 	}
 
 
+	/* add ourselves to the reboot_notifier_list */
+	ret = register_reboot_notifier(&xpc_reboot_notifier);
+	if (ret != 0) {
+		dev_warn(xpc_part, "can't register reboot notifier\n");
+	}
+
+	/* add ourselves to the die_notifier list (i.e., ia64die_chain) */
+	ret = register_die_notifier(&xpc_die_notifier);
+	if (ret != 0) {
+		dev_warn(xpc_part, "can't register die notifier\n");
+	}
+
+
 	/*
 	 * Set the beating to other partitions into motion.  This is
 	 * the last requirement for other partitions' discovery to
@@ -1001,6 +1275,12 @@ xpc_init(void)
 		/* indicate to others that our reserved page is uninitialized */
 		xpc_rsvd_page->vars_pa = 0;
 
+		/* take ourselves off of the reboot_notifier_list */
+		(void) unregister_reboot_notifier(&xpc_reboot_notifier);
+
+		/* take ourselves off of the die_notifier list */
+		(void) unregister_die_notifier(&xpc_die_notifier);
+
 		del_timer_sync(&xpc_hb_timer);
 		free_irq(SGI_XPC_ACTIVATE, NULL);
 		xpc_restrict_IPI_ops();
@@ -1024,7 +1304,7 @@ xpc_init(void)
 		/* mark this new thread as a non-starter */
 		up(&xpc_discovery_exited);
 
-		xpc_do_exit();
+		xpc_do_exit(xpcUnloading);
 		return -EBUSY;
 	}
 
@@ -1043,7 +1323,7 @@ module_init(xpc_init);
 void __exit
 xpc_exit(void)
 {
-	xpc_do_exit();
+	xpc_do_exit(xpcUnloading);
 }
 module_exit(xpc_exit);
 
@@ -1060,3 +1340,7 @@ module_param(xpc_hb_check_interval, int, 0);
 MODULE_PARM_DESC(xpc_hb_check_interval, "Number of seconds between "
 		"heartbeat checks.");
 
+module_param(xpc_disengage_request_timelimit, int, 0);
+MODULE_PARM_DESC(xpc_disengage_request_timelimit, "Number of seconds to wait "
+		"for disengage request to complete.");
+
diff --git a/arch/ia64/sn/kernel/xpc_partition.c b/arch/ia64/sn/kernel/xpc_partition.c
index 578265ea9e67..cdd6431853a1 100644
--- a/arch/ia64/sn/kernel/xpc_partition.c
+++ b/arch/ia64/sn/kernel/xpc_partition.c
@@ -44,16 +44,19 @@ static u64 xpc_sh2_IPI_access3;
 
 
 /* original protection values for each node */
-u64 xpc_prot_vec[MAX_COMPACT_NODES];
+u64 xpc_prot_vec[MAX_NUMNODES];
 
 
-/* this partition's reserved page */
+/* this partition's reserved page pointers */
 struct xpc_rsvd_page *xpc_rsvd_page;
-
-/* this partition's XPC variables (within the reserved page) */
+static u64 *xpc_part_nasids;
+static u64 *xpc_mach_nasids;
 struct xpc_vars *xpc_vars;
 struct xpc_vars_part *xpc_vars_part;
 
+static int xp_nasid_mask_bytes;	/* actual size in bytes of nasid mask */
+static int xp_nasid_mask_words;	/* actual size in words of nasid mask */
+
 
 /*
  * For performance reasons, each entry of xpc_partitions[] is cacheline
@@ -65,20 +68,16 @@ struct xpc_partition xpc_partitions[XP_MAX_PARTITIONS + 1];
 
 
 /*
- * Generic buffer used to store a local copy of the remote partitions
- * reserved page or XPC variables.
+ * Generic buffer used to store a local copy of portions of a remote
+ * partition's reserved page (either its header and part_nasids mask,
+ * or its vars).
  *
  * xpc_discovery runs only once and is a seperate thread that is
  * very likely going to be processing in parallel with receiving
  * interrupts.
  */
-char ____cacheline_aligned
-		xpc_remote_copy_buffer[XPC_RSVD_PAGE_ALIGNED_SIZE];
-
-
-/* systune related variables */
-int xpc_hb_interval = XPC_HB_DEFAULT_INTERVAL;
-int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_TIMEOUT;
+char ____cacheline_aligned xpc_remote_copy_buffer[XPC_RP_HEADER_SIZE +
+							XP_NASID_MASK_BYTES];
 
 
 /*
@@ -86,13 +85,16 @@ int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_TIMEOUT;
  * for that nasid. This function returns 0 on any error.
  */
 static u64
-xpc_get_rsvd_page_pa(int nasid, u64 buf, u64 buf_size)
+xpc_get_rsvd_page_pa(int nasid)
 {
 	bte_result_t bte_res;
 	s64 status;
 	u64 cookie = 0;
 	u64 rp_pa = nasid;	/* seed with nasid */
 	u64 len = 0;
+	u64 buf = buf;
+	u64 buf_len = 0;
+	void *buf_base = NULL;
 
 
 	while (1) {
@@ -108,13 +110,22 @@ xpc_get_rsvd_page_pa(int nasid, u64 buf, u64 buf_size)
 			break;
 		}
 
-		if (len > buf_size) {
-			dev_err(xpc_part, "len (=0x%016lx) > buf_size\n", len);
-			status = SALRET_ERROR;
-			break;
+		if (L1_CACHE_ALIGN(len) > buf_len) {
+			if (buf_base != NULL) {
+				kfree(buf_base);
+			}
+			buf_len = L1_CACHE_ALIGN(len);
+			buf = (u64) xpc_kmalloc_cacheline_aligned(buf_len,
+							GFP_KERNEL, &buf_base);
+			if (buf_base == NULL) {
+				dev_err(xpc_part, "unable to kmalloc "
+					"len=0x%016lx\n", buf_len);
+				status = SALRET_ERROR;
+				break;
+			}
 		}
 
-		bte_res = xp_bte_copy(rp_pa, ia64_tpa(buf), buf_size,
+		bte_res = xp_bte_copy(rp_pa, ia64_tpa(buf), buf_len,
 					(BTE_NOTIFY | BTE_WACQUIRE), NULL);
 		if (bte_res != BTE_SUCCESS) {
 			dev_dbg(xpc_part, "xp_bte_copy failed %i\n", bte_res);
@@ -123,6 +134,10 @@ xpc_get_rsvd_page_pa(int nasid, u64 buf, u64 buf_size)
 		}
 	}
 
+	if (buf_base != NULL) {
+		kfree(buf_base);
+	}
+
 	if (status != SALRET_OK) {
 		rp_pa = 0;
 	}
@@ -141,15 +156,15 @@ xpc_rsvd_page_init(void)
 {
 	struct xpc_rsvd_page *rp;
 	AMO_t *amos_page;
-	u64 rp_pa, next_cl, nasid_array = 0;
+	u64 rp_pa, nasid_array = 0;
 	int i, ret;
 
 
 	/* get the local reserved page's address */
 
-	rp_pa = xpc_get_rsvd_page_pa(cnodeid_to_nasid(0),
-					(u64) xpc_remote_copy_buffer,
-						XPC_RSVD_PAGE_ALIGNED_SIZE);
+	preempt_disable();
+	rp_pa = xpc_get_rsvd_page_pa(cpuid_to_nasid(smp_processor_id()));
+	preempt_enable();
 	if (rp_pa == 0) {
 		dev_err(xpc_part, "SAL failed to locate the reserved page\n");
 		return NULL;
@@ -164,12 +179,19 @@ xpc_rsvd_page_init(void)
 
 	rp->version = XPC_RP_VERSION;
 
-	/*
-	 * Place the XPC variables on the cache line following the
-	 * reserved page structure.
-	 */
-	next_cl = (u64) rp + XPC_RSVD_PAGE_ALIGNED_SIZE;
-	xpc_vars = (struct xpc_vars *) next_cl;
+	/* establish the actual sizes of the nasid masks */
+	if (rp->SAL_version == 1) {
+		/* SAL_version 1 didn't set the nasids_size field */
+		rp->nasids_size = 128;
+	}
+	xp_nasid_mask_bytes = rp->nasids_size;
+	xp_nasid_mask_words = xp_nasid_mask_bytes / 8;
+
+	/* setup the pointers to the various items in the reserved page */
+	xpc_part_nasids = XPC_RP_PART_NASIDS(rp);
+	xpc_mach_nasids = XPC_RP_MACH_NASIDS(rp);
+	xpc_vars = XPC_RP_VARS(rp);
+	xpc_vars_part = XPC_RP_VARS_PART(rp);
 
 	/*
 	 * Before clearing xpc_vars, see if a page of AMOs had been previously
@@ -221,33 +243,32 @@ xpc_rsvd_page_init(void)
 		amos_page = (AMO_t *) TO_AMO((u64) amos_page);
 	}
 
+	/* clear xpc_vars */
 	memset(xpc_vars, 0, sizeof(struct xpc_vars));
 
-	/*
-	 * Place the XPC per partition specific variables on the cache line
-	 * following the XPC variables structure.
-	 */
-	next_cl += XPC_VARS_ALIGNED_SIZE;
-	memset((u64 *) next_cl, 0, sizeof(struct xpc_vars_part) *
-							XP_MAX_PARTITIONS);
-	xpc_vars_part = (struct xpc_vars_part *) next_cl;
-	xpc_vars->vars_part_pa = __pa(next_cl);
-
 	xpc_vars->version = XPC_V_VERSION;
 	xpc_vars->act_nasid = cpuid_to_nasid(0);
 	xpc_vars->act_phys_cpuid = cpu_physical_id(0);
+	xpc_vars->vars_part_pa = __pa(xpc_vars_part);
+	xpc_vars->amos_page_pa = ia64_tpa((u64) amos_page);
 	xpc_vars->amos_page = amos_page;  /* save for next load of XPC */
 
 
-	/*
-	 * Initialize the activation related AMO variables.
-	 */
-	xpc_vars->act_amos = xpc_IPI_init(XP_MAX_PARTITIONS);
-	for (i = 1; i < XP_NASID_MASK_WORDS; i++) {
-		xpc_IPI_init(i + XP_MAX_PARTITIONS);
+	/* clear xpc_vars_part */
+	memset((u64 *) xpc_vars_part, 0, sizeof(struct xpc_vars_part) *
+							XP_MAX_PARTITIONS);
+
+	/* initialize the activate IRQ related AMO variables */
+	for (i = 0; i < xp_nasid_mask_words; i++) {
+		(void) xpc_IPI_init(XPC_ACTIVATE_IRQ_AMOS + i);
 	}
-	/* export AMO page's physical address to other partitions */
-	xpc_vars->amos_page_pa = ia64_tpa((u64) xpc_vars->amos_page);
+
+	/* initialize the engaged remote partitions related AMO variables */
+	(void) xpc_IPI_init(XPC_ENGAGED_PARTITIONS_AMO);
+	(void) xpc_IPI_init(XPC_DISENGAGE_REQUEST_AMO);
+
+	/* timestamp of when reserved page was setup by XPC */
+	rp->stamp = CURRENT_TIME;
 
 	/*
 	 * This signifies to the remote partition that our reserved
@@ -387,6 +408,11 @@ xpc_check_remote_hb(void)
 	remote_vars = (struct xpc_vars *) xpc_remote_copy_buffer;
 
 	for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
+
+		if (xpc_exiting) {
+			break;
+		}
+
 		if (partid == sn_partition_id) {
 			continue;
 		}
@@ -401,7 +427,7 @@ xpc_check_remote_hb(void)
 		/* pull the remote_hb cache line */
 		bres = xp_bte_copy(part->remote_vars_pa,
 					ia64_tpa((u64) remote_vars),
-					XPC_VARS_ALIGNED_SIZE,
+					XPC_RP_VARS_SIZE,
 					(BTE_NOTIFY | BTE_WACQUIRE), NULL);
 		if (bres != BTE_SUCCESS) {
 			XPC_DEACTIVATE_PARTITION(part,
@@ -410,14 +436,14 @@ xpc_check_remote_hb(void)
 		}
 
 		dev_dbg(xpc_part, "partid = %d, heartbeat = %ld, last_heartbeat"
-			" = %ld, kdb_status = %ld, HB_mask = 0x%lx\n", partid,
-			remote_vars->heartbeat, part->last_heartbeat,
-			remote_vars->kdb_status,
+			" = %ld, heartbeat_offline = %ld, HB_mask = 0x%lx\n",
+			partid, remote_vars->heartbeat, part->last_heartbeat,
+			remote_vars->heartbeat_offline,
 			remote_vars->heartbeating_to_mask);
 
 		if (((remote_vars->heartbeat == part->last_heartbeat) &&
-			(remote_vars->kdb_status == 0)) ||
-			     !XPC_HB_ALLOWED(sn_partition_id, remote_vars)) {
+			(remote_vars->heartbeat_offline == 0)) ||
+			     !xpc_hb_allowed(sn_partition_id, remote_vars)) {
 
 			XPC_DEACTIVATE_PARTITION(part, xpcNoHeartbeat);
 			continue;
@@ -429,31 +455,31 @@ xpc_check_remote_hb(void)
 
 
 /*
- * Get a copy of the remote partition's rsvd page.
+ * Get a copy of a portion of the remote partition's rsvd page.
  *
  * remote_rp points to a buffer that is cacheline aligned for BTE copies and
- * assumed to be of size XPC_RSVD_PAGE_ALIGNED_SIZE.
+ * is large enough to contain a copy of their reserved page header and
+ * part_nasids mask.
  */
 static enum xpc_retval
 xpc_get_remote_rp(int nasid, u64 *discovered_nasids,
-		struct xpc_rsvd_page *remote_rp, u64 *remote_rsvd_page_pa)
+		struct xpc_rsvd_page *remote_rp, u64 *remote_rp_pa)
 {
 	int bres, i;
 
 
 	/* get the reserved page's physical address */
 
-	*remote_rsvd_page_pa = xpc_get_rsvd_page_pa(nasid, (u64) remote_rp,
-						XPC_RSVD_PAGE_ALIGNED_SIZE);
-	if (*remote_rsvd_page_pa == 0) {
+	*remote_rp_pa = xpc_get_rsvd_page_pa(nasid);
+	if (*remote_rp_pa == 0) {
 		return xpcNoRsvdPageAddr;
 	}
 
 
-	/* pull over the reserved page structure */
+	/* pull over the reserved page header and part_nasids mask */
 
-	bres = xp_bte_copy(*remote_rsvd_page_pa, ia64_tpa((u64) remote_rp),
-				XPC_RSVD_PAGE_ALIGNED_SIZE,
+	bres = xp_bte_copy(*remote_rp_pa, ia64_tpa((u64) remote_rp),
+				XPC_RP_HEADER_SIZE + xp_nasid_mask_bytes,
 				(BTE_NOTIFY | BTE_WACQUIRE), NULL);
 	if (bres != BTE_SUCCESS) {
 		return xpc_map_bte_errors(bres);
@@ -461,8 +487,11 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids,
 
 
 	if (discovered_nasids != NULL) {
-		for (i = 0; i < XP_NASID_MASK_WORDS; i++) {
-			discovered_nasids[i] |= remote_rp->part_nasids[i];
+		u64 *remote_part_nasids = XPC_RP_PART_NASIDS(remote_rp);
+
+
+		for (i = 0; i < xp_nasid_mask_words; i++) {
+			discovered_nasids[i] |= remote_part_nasids[i];
 		}
 	}
 
@@ -489,10 +518,10 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids,
 
 
 /*
- * Get a copy of the remote partition's XPC variables.
+ * Get a copy of the remote partition's XPC variables from the reserved page.
  *
  * remote_vars points to a buffer that is cacheline aligned for BTE copies and
- * assumed to be of size XPC_VARS_ALIGNED_SIZE.
+ * assumed to be of size XPC_RP_VARS_SIZE.
  */
 static enum xpc_retval
 xpc_get_remote_vars(u64 remote_vars_pa, struct xpc_vars *remote_vars)
@@ -508,7 +537,7 @@ xpc_get_remote_vars(u64 remote_vars_pa, struct xpc_vars *remote_vars)
 	/* pull over the cross partition variables */
 
 	bres = xp_bte_copy(remote_vars_pa, ia64_tpa((u64) remote_vars),
-				XPC_VARS_ALIGNED_SIZE,
+				XPC_RP_VARS_SIZE,
 				(BTE_NOTIFY | BTE_WACQUIRE), NULL);
 	if (bres != BTE_SUCCESS) {
 		return xpc_map_bte_errors(bres);
@@ -524,7 +553,56 @@ xpc_get_remote_vars(u64 remote_vars_pa, struct xpc_vars *remote_vars)
 
 
 /*
- * Prior code has determine the nasid which generated an IPI.  Inspect
+ * Update the remote partition's info.
+ */
+static void
+xpc_update_partition_info(struct xpc_partition *part, u8 remote_rp_version,
+		struct timespec *remote_rp_stamp, u64 remote_rp_pa,
+		u64 remote_vars_pa, struct xpc_vars *remote_vars)
+{
+	part->remote_rp_version = remote_rp_version;
+	dev_dbg(xpc_part, "  remote_rp_version = 0x%016lx\n",
+		part->remote_rp_version);
+
+	part->remote_rp_stamp = *remote_rp_stamp;
+	dev_dbg(xpc_part, "  remote_rp_stamp (tv_sec = 0x%lx tv_nsec = 0x%lx\n",
+		part->remote_rp_stamp.tv_sec, part->remote_rp_stamp.tv_nsec);
+
+	part->remote_rp_pa = remote_rp_pa;
+	dev_dbg(xpc_part, "  remote_rp_pa = 0x%016lx\n", part->remote_rp_pa);
+
+	part->remote_vars_pa = remote_vars_pa;
+	dev_dbg(xpc_part, "  remote_vars_pa = 0x%016lx\n",
+		part->remote_vars_pa);
+
+	part->last_heartbeat = remote_vars->heartbeat;
+	dev_dbg(xpc_part, "  last_heartbeat = 0x%016lx\n",
+		part->last_heartbeat);
+
+	part->remote_vars_part_pa = remote_vars->vars_part_pa;
+	dev_dbg(xpc_part, "  remote_vars_part_pa = 0x%016lx\n",
+		part->remote_vars_part_pa);
+
+	part->remote_act_nasid = remote_vars->act_nasid;
+	dev_dbg(xpc_part, "  remote_act_nasid = 0x%x\n",
+		part->remote_act_nasid);
+
+	part->remote_act_phys_cpuid = remote_vars->act_phys_cpuid;
+	dev_dbg(xpc_part, "  remote_act_phys_cpuid = 0x%x\n",
+		part->remote_act_phys_cpuid);
+
+	part->remote_amos_page_pa = remote_vars->amos_page_pa;
+	dev_dbg(xpc_part, "  remote_amos_page_pa = 0x%lx\n",
+		part->remote_amos_page_pa);
+
+	part->remote_vars_version = remote_vars->version;
+	dev_dbg(xpc_part, "  remote_vars_version = 0x%x\n",
+		part->remote_vars_version);
+}
+
+
+/*
+ * Prior code has determined the nasid which generated an IPI.  Inspect
  * that nasid to determine if its partition needs to be activated or
  * deactivated.
  *
@@ -542,8 +620,12 @@ xpc_identify_act_IRQ_req(int nasid)
 {
 	struct xpc_rsvd_page *remote_rp;
 	struct xpc_vars *remote_vars;
-	u64 remote_rsvd_page_pa;
+	u64 remote_rp_pa;
 	u64 remote_vars_pa;
+	int remote_rp_version;
+	int reactivate = 0;
+	int stamp_diff;
+	struct timespec remote_rp_stamp = { 0, 0 };
 	partid_t partid;
 	struct xpc_partition *part;
 	enum xpc_retval ret;
@@ -553,7 +635,7 @@ xpc_identify_act_IRQ_req(int nasid)
 
 	remote_rp = (struct xpc_rsvd_page *) xpc_remote_copy_buffer;
 
-	ret = xpc_get_remote_rp(nasid, NULL, remote_rp, &remote_rsvd_page_pa);
+	ret = xpc_get_remote_rp(nasid, NULL, remote_rp, &remote_rp_pa);
 	if (ret != xpcSuccess) {
 		dev_warn(xpc_part, "unable to get reserved page from nasid %d, "
 			"which sent interrupt, reason=%d\n", nasid, ret);
@@ -561,6 +643,10 @@ xpc_identify_act_IRQ_req(int nasid)
 	}
 
 	remote_vars_pa = remote_rp->vars_pa;
+	remote_rp_version = remote_rp->version;
+	if (XPC_SUPPORTS_RP_STAMP(remote_rp_version)) {
+		remote_rp_stamp = remote_rp->stamp;
+	}
 	partid = remote_rp->partid;
 	part = &xpc_partitions[partid];
 
@@ -586,44 +672,117 @@ xpc_identify_act_IRQ_req(int nasid)
 		"%ld:0x%lx\n", (int) nasid, (int) partid, part->act_IRQ_rcvd,
 		remote_vars->heartbeat, remote_vars->heartbeating_to_mask);
 
+	if (xpc_partition_disengaged(part) &&
+					part->act_state == XPC_P_INACTIVE) {
 
-	if (part->act_state == XPC_P_INACTIVE) {
+		xpc_update_partition_info(part, remote_rp_version,
+					&remote_rp_stamp, remote_rp_pa,
+					remote_vars_pa, remote_vars);
 
-		part->remote_rp_pa = remote_rsvd_page_pa;
-		dev_dbg(xpc_part, "  remote_rp_pa = 0x%016lx\n",
-			part->remote_rp_pa);
+		if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) {
+			if (xpc_partition_disengage_requested(1UL << partid)) {
+				/*
+				 * Other side is waiting on us to disengage,
+				 * even though we already have.
+				 */
+				return;
+			}
+		} else {
+			/* other side doesn't support disengage requests */
+			xpc_clear_partition_disengage_request(1UL << partid);
+		}
 
-		part->remote_vars_pa = remote_vars_pa;
-		dev_dbg(xpc_part, "  remote_vars_pa = 0x%016lx\n",
-			part->remote_vars_pa);
+		xpc_activate_partition(part);
+		return;
+	}
 
-		part->last_heartbeat = remote_vars->heartbeat;
-		dev_dbg(xpc_part, "  last_heartbeat = 0x%016lx\n",
-			part->last_heartbeat);
+	DBUG_ON(part->remote_rp_version == 0);
+	DBUG_ON(part->remote_vars_version == 0);
+
+	if (!XPC_SUPPORTS_RP_STAMP(part->remote_rp_version)) {
+		DBUG_ON(XPC_SUPPORTS_DISENGAGE_REQUEST(part->
+							remote_vars_version));
+
+		if (!XPC_SUPPORTS_RP_STAMP(remote_rp_version)) {
+			DBUG_ON(XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->
+								version));
+			/* see if the other side rebooted */
+			if (part->remote_amos_page_pa ==
+				remote_vars->amos_page_pa &&
+					xpc_hb_allowed(sn_partition_id,
+								remote_vars)) {
+				/* doesn't look that way, so ignore the IPI */
+				return;
+			}
+		}
 
-		part->remote_vars_part_pa = remote_vars->vars_part_pa;
-		dev_dbg(xpc_part, "  remote_vars_part_pa = 0x%016lx\n",
-			part->remote_vars_part_pa);
+		/*
+		 * Other side rebooted and previous XPC didn't support the
+		 * disengage request, so we don't need to do anything special.
+		 */
 
-		part->remote_act_nasid = remote_vars->act_nasid;
-		dev_dbg(xpc_part, "  remote_act_nasid = 0x%x\n",
-			part->remote_act_nasid);
+		xpc_update_partition_info(part, remote_rp_version,
+						&remote_rp_stamp, remote_rp_pa,
+						remote_vars_pa, remote_vars);
+		part->reactivate_nasid = nasid;
+		XPC_DEACTIVATE_PARTITION(part, xpcReactivating);
+		return;
+	}
 
-		part->remote_act_phys_cpuid = remote_vars->act_phys_cpuid;
-		dev_dbg(xpc_part, "  remote_act_phys_cpuid = 0x%x\n",
-			part->remote_act_phys_cpuid);
+	DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version));
 
-		part->remote_amos_page_pa = remote_vars->amos_page_pa;
-		dev_dbg(xpc_part, "  remote_amos_page_pa = 0x%lx\n",
-			part->remote_amos_page_pa);
+	if (!XPC_SUPPORTS_RP_STAMP(remote_rp_version)) {
+		DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->version));
 
-		xpc_activate_partition(part);
+		/*
+		 * Other side rebooted and previous XPC did support the
+		 * disengage request, but the new one doesn't.
+		 */
+
+		xpc_clear_partition_engaged(1UL << partid);
+		xpc_clear_partition_disengage_request(1UL << partid);
 
-	} else if (part->remote_amos_page_pa != remote_vars->amos_page_pa ||
-			!XPC_HB_ALLOWED(sn_partition_id, remote_vars)) {
+		xpc_update_partition_info(part, remote_rp_version,
+						&remote_rp_stamp, remote_rp_pa,
+						remote_vars_pa, remote_vars);
+		reactivate = 1;
+
+	} else {
+		DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->version));
 
+		stamp_diff = xpc_compare_stamps(&part->remote_rp_stamp,
+							&remote_rp_stamp);
+		if (stamp_diff != 0) {
+			DBUG_ON(stamp_diff >= 0);
+
+			/*
+			 * Other side rebooted and the previous XPC did support
+			 * the disengage request, as does the new one.
+			 */
+
+			DBUG_ON(xpc_partition_engaged(1UL << partid));
+			DBUG_ON(xpc_partition_disengage_requested(1UL <<
+								partid));
+
+			xpc_update_partition_info(part, remote_rp_version,
+						&remote_rp_stamp, remote_rp_pa,
+						remote_vars_pa, remote_vars);
+			reactivate = 1;
+		}
+	}
+
+	if (!xpc_partition_disengaged(part)) {
+		/* still waiting on other side to disengage from us */
+		return;
+	}
+
+	if (reactivate) {
 		part->reactivate_nasid = nasid;
 		XPC_DEACTIVATE_PARTITION(part, xpcReactivating);
+
+	} else if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version) &&
+			xpc_partition_disengage_requested(1UL << partid)) {
+		XPC_DEACTIVATE_PARTITION(part, xpcOtherGoingDown);
 	}
 }
 
@@ -643,14 +802,17 @@ xpc_identify_act_IRQ_sender(void)
 	u64 nasid;			/* remote nasid */
 	int n_IRQs_detected = 0;
 	AMO_t *act_amos;
-	struct xpc_rsvd_page *rp = (struct xpc_rsvd_page *) xpc_rsvd_page;
 
 
-	act_amos = xpc_vars->act_amos;
+	act_amos = xpc_vars->amos_page + XPC_ACTIVATE_IRQ_AMOS;
 
 
 	/* scan through act AMO variable looking for non-zero entries */
-	for (word = 0; word < XP_NASID_MASK_WORDS; word++) {
+	for (word = 0; word < xp_nasid_mask_words; word++) {
+
+		if (xpc_exiting) {
+			break;
+		}
 
 		nasid_mask = xpc_IPI_receive(&act_amos[word]);
 		if (nasid_mask == 0) {
@@ -668,7 +830,7 @@ xpc_identify_act_IRQ_sender(void)
 		 * remote nasid in our reserved pages machine mask.
 		 * This is used in the event of module reload.
 		 */
-		rp->mach_nasids[word] |= nasid_mask;
+		xpc_mach_nasids[word] |= nasid_mask;
 
 
 		/* locate the nasid(s) which sent interrupts */
@@ -688,6 +850,55 @@ xpc_identify_act_IRQ_sender(void)
 
 
 /*
+ * See if the other side has responded to a partition disengage request
+ * from us.
+ */
+int
+xpc_partition_disengaged(struct xpc_partition *part)
+{
+	partid_t partid = XPC_PARTID(part);
+	int disengaged;
+
+
+	disengaged = (xpc_partition_engaged(1UL << partid) == 0);
+	if (part->disengage_request_timeout) {
+		if (!disengaged) {
+			if (jiffies < part->disengage_request_timeout) {
+				/* timelimit hasn't been reached yet */
+				return 0;
+			}
+
+			/*
+			 * Other side hasn't responded to our disengage
+			 * request in a timely fashion, so assume it's dead.
+			 */
+
+			xpc_clear_partition_engaged(1UL << partid);
+			disengaged = 1;
+		}
+		part->disengage_request_timeout = 0;
+
+		/* cancel the timer function, provided it's not us */
+		if (!in_interrupt()) {
+			del_singleshot_timer_sync(&part->
+						      disengage_request_timer);
+		}
+
+		DBUG_ON(part->act_state != XPC_P_DEACTIVATING &&
+					part->act_state != XPC_P_INACTIVE);
+		if (part->act_state != XPC_P_INACTIVE) {
+			xpc_wakeup_channel_mgr(part);
+		}
+
+		if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) {
+			xpc_cancel_partition_disengage_request(part);
+		}
+	}
+	return disengaged;
+}
+
+
+/*
  * Mark specified partition as active.
  */
 enum xpc_retval
@@ -721,7 +932,6 @@ xpc_deactivate_partition(const int line, struct xpc_partition *part,
 				enum xpc_retval reason)
 {
 	unsigned long irq_flags;
-	partid_t partid = XPC_PARTID(part);
 
 
 	spin_lock_irqsave(&part->act_lock, irq_flags);
@@ -749,17 +959,27 @@ xpc_deactivate_partition(const int line, struct xpc_partition *part,
 
 	spin_unlock_irqrestore(&part->act_lock, irq_flags);
 
-	XPC_DISALLOW_HB(partid, xpc_vars);
+	if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) {
+		xpc_request_partition_disengage(part);
+		xpc_IPI_send_disengage(part);
 
-	dev_dbg(xpc_part, "bringing partition %d down, reason = %d\n", partid,
-		reason);
+		/* set a timelimit on the disengage request */
+		part->disengage_request_timeout = jiffies +
+					(xpc_disengage_request_timelimit * HZ);
+		part->disengage_request_timer.expires =
+					part->disengage_request_timeout;
+		add_timer(&part->disengage_request_timer);
+	}
+
+	dev_dbg(xpc_part, "bringing partition %d down, reason = %d\n",
+		XPC_PARTID(part), reason);
 
-	xpc_partition_down(part, reason);
+	xpc_partition_going_down(part, reason);
 }
 
 
 /*
- * Mark specified partition as active.
+ * Mark specified partition as inactive.
  */
 void
 xpc_mark_partition_inactive(struct xpc_partition *part)
@@ -792,9 +1012,10 @@ xpc_discovery(void)
 	void *remote_rp_base;
 	struct xpc_rsvd_page *remote_rp;
 	struct xpc_vars *remote_vars;
-	u64 remote_rsvd_page_pa;
+	u64 remote_rp_pa;
 	u64 remote_vars_pa;
 	int region;
+	int region_size;
 	int max_regions;
 	int nasid;
 	struct xpc_rsvd_page *rp;
@@ -804,7 +1025,8 @@ xpc_discovery(void)
 	enum xpc_retval ret;
 
 
-	remote_rp = xpc_kmalloc_cacheline_aligned(XPC_RSVD_PAGE_ALIGNED_SIZE,
+	remote_rp = xpc_kmalloc_cacheline_aligned(XPC_RP_HEADER_SIZE +
+						xp_nasid_mask_bytes,
 						GFP_KERNEL, &remote_rp_base);
 	if (remote_rp == NULL) {
 		return;
@@ -812,13 +1034,13 @@ xpc_discovery(void)
 	remote_vars = (struct xpc_vars *) remote_rp;
 
 
-	discovered_nasids = kmalloc(sizeof(u64) * XP_NASID_MASK_WORDS,
+	discovered_nasids = kmalloc(sizeof(u64) * xp_nasid_mask_words,
 							GFP_KERNEL);
 	if (discovered_nasids == NULL) {
 		kfree(remote_rp_base);
 		return;
 	}
-	memset(discovered_nasids, 0, sizeof(u64) * XP_NASID_MASK_WORDS);
+	memset(discovered_nasids, 0, sizeof(u64) * xp_nasid_mask_words);
 
 	rp = (struct xpc_rsvd_page *) xpc_rsvd_page;
 
@@ -827,11 +1049,19 @@ xpc_discovery(void)
 	 * nodes that can comprise an access protection grouping. The access
 	 * protection is in regards to memory, IOI and IPI.
 	 */
-//>>> move the next two #defines into either include/asm-ia64/sn/arch.h or
-//>>> include/asm-ia64/sn/addrs.h
-#define SH1_MAX_REGIONS		64
-#define SH2_MAX_REGIONS		256
-	max_regions = is_shub2() ? SH2_MAX_REGIONS : SH1_MAX_REGIONS;
+	max_regions = 64;
+	region_size = sn_region_size;
+
+	switch (region_size) {
+	case 128:
+		max_regions *= 2;
+	case 64:
+		max_regions *= 2;
+	case 32:
+		max_regions *= 2;
+		region_size = 16;
+		DBUG_ON(!is_shub2());
+	}
 
 	for (region = 0; region < max_regions; region++) {
 
@@ -841,8 +1071,8 @@ xpc_discovery(void)
 
 		dev_dbg(xpc_part, "searching region %d\n", region);
 
-		for (nasid = (region * sn_region_size * 2);
-		     nasid < ((region + 1) * sn_region_size * 2);
+		for (nasid = (region * region_size * 2);
+		     nasid < ((region + 1) * region_size * 2);
 		     nasid += 2) {
 
 			if ((volatile int) xpc_exiting) {
@@ -852,14 +1082,14 @@ xpc_discovery(void)
 			dev_dbg(xpc_part, "checking nasid %d\n", nasid);
 
 
-			if (XPC_NASID_IN_ARRAY(nasid, rp->part_nasids)) {
+			if (XPC_NASID_IN_ARRAY(nasid, xpc_part_nasids)) {
 				dev_dbg(xpc_part, "PROM indicates Nasid %d is "
 					"part of the local partition; skipping "
 					"region\n", nasid);
 				break;
 			}
 
-			if (!(XPC_NASID_IN_ARRAY(nasid, rp->mach_nasids))) {
+			if (!(XPC_NASID_IN_ARRAY(nasid, xpc_mach_nasids))) {
 				dev_dbg(xpc_part, "PROM indicates Nasid %d was "
 					"not on Numa-Link network at reset\n",
 					nasid);
@@ -877,7 +1107,7 @@ xpc_discovery(void)
 			/* pull over the reserved page structure */
 
 			ret = xpc_get_remote_rp(nasid, discovered_nasids,
-					      remote_rp, &remote_rsvd_page_pa);
+					      remote_rp, &remote_rp_pa);
 			if (ret != xpcSuccess) {
 				dev_dbg(xpc_part, "unable to get reserved page "
 					"from nasid %d, reason=%d\n", nasid,
@@ -948,6 +1178,13 @@ xpc_discovery(void)
 				remote_vars->act_nasid,
 				remote_vars->act_phys_cpuid);
 
+			if (XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->
+								version)) {
+				part->remote_amos_page_pa =
+						remote_vars->amos_page_pa;
+				xpc_mark_partition_disengaged(part);
+				xpc_cancel_partition_disengage_request(part);
+			}
 			xpc_IPI_send_activate(remote_vars);
 		}
 	}
@@ -974,12 +1211,12 @@ xpc_initiate_partid_to_nasids(partid_t partid, void *nasid_mask)
 		return xpcPartitionDown;
 	}
 
-	part_nasid_pa = part->remote_rp_pa +
-		(u64) &((struct xpc_rsvd_page *) 0)->part_nasids;
+	memset(nasid_mask, 0, XP_NASID_MASK_BYTES);
+
+	part_nasid_pa = (u64) XPC_RP_PART_NASIDS(part->remote_rp_pa);
 
 	bte_res = xp_bte_copy(part_nasid_pa, ia64_tpa((u64) nasid_mask),
-				L1_CACHE_ALIGN(XP_NASID_MASK_BYTES),
-				(BTE_NOTIFY | BTE_WACQUIRE), NULL);
+			xp_nasid_mask_bytes, (BTE_NOTIFY | BTE_WACQUIRE), NULL);
 
 	return xpc_map_bte_errors(bte_res);
 }
diff --git a/arch/ia64/sn/pci/pci_dma.c b/arch/ia64/sn/pci/pci_dma.c
index 0e4b9ad9ef02..9bf9f23b9a1f 100644
--- a/arch/ia64/sn/pci/pci_dma.c
+++ b/arch/ia64/sn/pci/pci_dma.c
@@ -75,7 +75,7 @@ EXPORT_SYMBOL(sn_dma_set_mask);
  * more information.
  */
 void *sn_dma_alloc_coherent(struct device *dev, size_t size,
-			    dma_addr_t * dma_handle, int flags)
+			    dma_addr_t * dma_handle, gfp_t flags)
 {
 	void *cpuaddr;
 	unsigned long phys_addr;
@@ -326,6 +326,29 @@ int sn_pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size)
 {
 	unsigned long addr;
 	int ret;
+	struct ia64_sal_retval isrv;
+
+	/*
+	 * First, try the SN_SAL_IOIF_PCI_SAFE SAL call which can work
+	 * around hw issues at the pci bus level.  SGI proms older than
+	 * 4.10 don't implment this.
+	 */
+
+	SAL_CALL(isrv, SN_SAL_IOIF_PCI_SAFE,
+		pci_domain_nr(bus), bus->number,
+		0, /* io */
+		0, /* read */
+		port, size, __pa(val));
+
+	if (isrv.status == 0)
+		return size;
+
+	/*
+	 * If the above failed, retry using the SAL_PROBE call which should
+	 * be present in all proms (but which cannot work round PCI chipset
+	 * bugs).  This code is retained for compatability with old
+	 * pre-4.10 proms, and should be removed at some point in the future.
+	 */
 
 	if (!SN_PCIBUS_BUSSOFT(bus))
 		return -ENODEV;
@@ -349,6 +372,29 @@ int sn_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size)
 	int ret = size;
 	unsigned long paddr;
 	unsigned long *addr;
+	struct ia64_sal_retval isrv;
+
+	/*
+	 * First, try the SN_SAL_IOIF_PCI_SAFE SAL call which can work
+	 * around hw issues at the pci bus level.  SGI proms older than
+	 * 4.10 don't implment this.
+	 */
+
+	SAL_CALL(isrv, SN_SAL_IOIF_PCI_SAFE,
+		pci_domain_nr(bus), bus->number,
+		0, /* io */
+		1, /* write */
+		port, size, __pa(&val));
+
+	if (isrv.status == 0)
+		return size;
+
+	/*
+	 * If the above failed, retry using the SAL_PROBE call which should
+	 * be present in all proms (but which cannot work round PCI chipset
+	 * bugs).  This code is retained for compatability with old
+	 * pre-4.10 proms, and should be removed at some point in the future.
+	 */
 
 	if (!SN_PCIBUS_BUSSOFT(bus)) {
 		ret = -ENODEV;
diff --git a/arch/ia64/sn/pci/pcibr/pcibr_provider.c b/arch/ia64/sn/pci/pcibr/pcibr_provider.c
index 7b03b8084ffc..1f500c81002c 100644
--- a/arch/ia64/sn/pci/pcibr/pcibr_provider.c
+++ b/arch/ia64/sn/pci/pcibr/pcibr_provider.c
@@ -212,13 +212,13 @@ void pcibr_target_interrupt(struct sn_irq_info *sn_irq_info)
 		    pdi_pcibus_info;
 
 		/* Disable the device's IRQ   */
-		pcireg_intr_enable_bit_clr(pcibus_info, bit);
+		pcireg_intr_enable_bit_clr(pcibus_info, (1 << bit));
 
 		/* Change the device's IRQ    */
 		pcireg_intr_addr_addr_set(pcibus_info, bit, xtalk_addr);
 
 		/* Re-enable the device's IRQ */
-		pcireg_intr_enable_bit_set(pcibus_info, bit);
+		pcireg_intr_enable_bit_set(pcibus_info, (1 << bit));
 
 		pcibr_force_interrupt(sn_irq_info);
 	}
diff --git a/arch/ia64/sn/pci/pcibr/pcibr_reg.c b/arch/ia64/sn/pci/pcibr/pcibr_reg.c
index 21426d02fbe6..5d534091262c 100644
--- a/arch/ia64/sn/pci/pcibr/pcibr_reg.c
+++ b/arch/ia64/sn/pci/pcibr/pcibr_reg.c
@@ -8,6 +8,7 @@
 
 #include <linux/interrupt.h>
 #include <linux/types.h>
+#include <asm/sn/io.h>
 #include <asm/sn/pcibr_provider.h>
 #include <asm/sn/pcibus_provider_defs.h>
 #include <asm/sn/pcidev.h>
@@ -29,10 +30,10 @@ void pcireg_control_bit_clr(struct pcibus_info *pcibus_info, uint64_t bits)
 	if (pcibus_info) {
 		switch (pcibus_info->pbi_bridge_type) {
 		case PCIBR_BRIDGETYPE_TIOCP:
-			ptr->tio.cp_control &= ~bits;
+			__sn_clrq_relaxed(&ptr->tio.cp_control, bits);
 			break;
 		case PCIBR_BRIDGETYPE_PIC:
-			ptr->pic.p_wid_control &= ~bits;
+			__sn_clrq_relaxed(&ptr->pic.p_wid_control, bits);
 			break;
 		default:
 			panic
@@ -49,10 +50,10 @@ void pcireg_control_bit_set(struct pcibus_info *pcibus_info, uint64_t bits)
 	if (pcibus_info) {
 		switch (pcibus_info->pbi_bridge_type) {
 		case PCIBR_BRIDGETYPE_TIOCP:
-			ptr->tio.cp_control |= bits;
+			__sn_setq_relaxed(&ptr->tio.cp_control, bits);
 			break;
 		case PCIBR_BRIDGETYPE_PIC:
-			ptr->pic.p_wid_control |= bits;
+			__sn_setq_relaxed(&ptr->pic.p_wid_control, bits);
 			break;
 		default:
 			panic
@@ -73,10 +74,10 @@ uint64_t pcireg_tflush_get(struct pcibus_info *pcibus_info)
 	if (pcibus_info) {
 		switch (pcibus_info->pbi_bridge_type) {
 		case PCIBR_BRIDGETYPE_TIOCP:
-			ret = ptr->tio.cp_tflush;
+			ret = __sn_readq_relaxed(&ptr->tio.cp_tflush);
 			break;
 		case PCIBR_BRIDGETYPE_PIC:
-			ret = ptr->pic.p_wid_tflush;
+			ret = __sn_readq_relaxed(&ptr->pic.p_wid_tflush);
 			break;
 		default:
 			panic
@@ -103,10 +104,10 @@ uint64_t pcireg_intr_status_get(struct pcibus_info * pcibus_info)
 	if (pcibus_info) {
 		switch (pcibus_info->pbi_bridge_type) {
 		case PCIBR_BRIDGETYPE_TIOCP:
-			ret = ptr->tio.cp_int_status;
+			ret = __sn_readq_relaxed(&ptr->tio.cp_int_status);
 			break;
 		case PCIBR_BRIDGETYPE_PIC:
-			ret = ptr->pic.p_int_status;
+			ret = __sn_readq_relaxed(&ptr->pic.p_int_status);
 			break;
 		default:
 			panic
@@ -127,10 +128,10 @@ void pcireg_intr_enable_bit_clr(struct pcibus_info *pcibus_info, uint64_t bits)
 	if (pcibus_info) {
 		switch (pcibus_info->pbi_bridge_type) {
 		case PCIBR_BRIDGETYPE_TIOCP:
-			ptr->tio.cp_int_enable &= ~bits;
+			__sn_clrq_relaxed(&ptr->tio.cp_int_enable, bits);
 			break;
 		case PCIBR_BRIDGETYPE_PIC:
-			ptr->pic.p_int_enable &= ~bits;
+			__sn_clrq_relaxed(&ptr->pic.p_int_enable, bits);
 			break;
 		default:
 			panic
@@ -147,10 +148,10 @@ void pcireg_intr_enable_bit_set(struct pcibus_info *pcibus_info, uint64_t bits)
 	if (pcibus_info) {
 		switch (pcibus_info->pbi_bridge_type) {
 		case PCIBR_BRIDGETYPE_TIOCP:
-			ptr->tio.cp_int_enable |= bits;
+			__sn_setq_relaxed(&ptr->tio.cp_int_enable, bits);
 			break;
 		case PCIBR_BRIDGETYPE_PIC:
-			ptr->pic.p_int_enable |= bits;
+			__sn_setq_relaxed(&ptr->pic.p_int_enable, bits);
 			break;
 		default:
 			panic
@@ -171,14 +172,16 @@ void pcireg_intr_addr_addr_set(struct pcibus_info *pcibus_info, int int_n,
 	if (pcibus_info) {
 		switch (pcibus_info->pbi_bridge_type) {
 		case PCIBR_BRIDGETYPE_TIOCP:
-			ptr->tio.cp_int_addr[int_n] &= ~TIOCP_HOST_INTR_ADDR;
-			ptr->tio.cp_int_addr[int_n] |=
-			    (addr & TIOCP_HOST_INTR_ADDR);
+			__sn_clrq_relaxed(&ptr->tio.cp_int_addr[int_n],
+			    TIOCP_HOST_INTR_ADDR);
+			__sn_setq_relaxed(&ptr->tio.cp_int_addr[int_n],
+			    (addr & TIOCP_HOST_INTR_ADDR));
 			break;
 		case PCIBR_BRIDGETYPE_PIC:
-			ptr->pic.p_int_addr[int_n] &= ~PIC_HOST_INTR_ADDR;
-			ptr->pic.p_int_addr[int_n] |=
-			    (addr & PIC_HOST_INTR_ADDR);
+			__sn_clrq_relaxed(&ptr->pic.p_int_addr[int_n],
+			    PIC_HOST_INTR_ADDR);
+			__sn_setq_relaxed(&ptr->pic.p_int_addr[int_n],
+			    (addr & PIC_HOST_INTR_ADDR));
 			break;
 		default:
 			panic
@@ -198,10 +201,10 @@ void pcireg_force_intr_set(struct pcibus_info *pcibus_info, int int_n)
 	if (pcibus_info) {
 		switch (pcibus_info->pbi_bridge_type) {
 		case PCIBR_BRIDGETYPE_TIOCP:
-			ptr->tio.cp_force_pin[int_n] = 1;
+			writeq(1, &ptr->tio.cp_force_pin[int_n]);
 			break;
 		case PCIBR_BRIDGETYPE_PIC:
-			ptr->pic.p_force_pin[int_n] = 1;
+			writeq(1, &ptr->pic.p_force_pin[int_n]);
 			break;
 		default:
 			panic
@@ -222,10 +225,12 @@ uint64_t pcireg_wrb_flush_get(struct pcibus_info *pcibus_info, int device)
 	if (pcibus_info) {
 		switch (pcibus_info->pbi_bridge_type) {
 		case PCIBR_BRIDGETYPE_TIOCP:
-			ret = ptr->tio.cp_wr_req_buf[device];
+			ret =
+			    __sn_readq_relaxed(&ptr->tio.cp_wr_req_buf[device]);
 			break;
 		case PCIBR_BRIDGETYPE_PIC:
-			ret = ptr->pic.p_wr_req_buf[device];
+			ret =
+			    __sn_readq_relaxed(&ptr->pic.p_wr_req_buf[device]);
 			break;
 		default:
 		      panic("pcireg_wrb_flush_get: unknown bridgetype bridge 0x%p", (void *)ptr);
@@ -244,10 +249,10 @@ void pcireg_int_ate_set(struct pcibus_info *pcibus_info, int ate_index,
 	if (pcibus_info) {
 		switch (pcibus_info->pbi_bridge_type) {
 		case PCIBR_BRIDGETYPE_TIOCP:
-			ptr->tio.cp_int_ate_ram[ate_index] = (uint64_t) val;
+			writeq(val, &ptr->tio.cp_int_ate_ram[ate_index]);
 			break;
 		case PCIBR_BRIDGETYPE_PIC:
-			ptr->pic.p_int_ate_ram[ate_index] = (uint64_t) val;
+			writeq(val, &ptr->pic.p_int_ate_ram[ate_index]);
 			break;
 		default:
 			panic
@@ -265,12 +270,10 @@ uint64_t *pcireg_int_ate_addr(struct pcibus_info *pcibus_info, int ate_index)
 	if (pcibus_info) {
 		switch (pcibus_info->pbi_bridge_type) {
 		case PCIBR_BRIDGETYPE_TIOCP:
-			ret =
-			    (uint64_t *) & (ptr->tio.cp_int_ate_ram[ate_index]);
+			ret = &ptr->tio.cp_int_ate_ram[ate_index];
 			break;
 		case PCIBR_BRIDGETYPE_PIC:
-			ret =
-			    (uint64_t *) & (ptr->pic.p_int_ate_ram[ate_index]);
+			ret = &ptr->pic.p_int_ate_ram[ate_index];
 			break;
 		default:
 			panic
diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c
index 19bced34d5f1..46b646a6d345 100644
--- a/arch/ia64/sn/pci/tioca_provider.c
+++ b/arch/ia64/sn/pci/tioca_provider.c
@@ -11,6 +11,7 @@
 #include <linux/pci.h>
 #include <asm/sn/sn_sal.h>
 #include <asm/sn/addrs.h>
+#include <asm/sn/io.h>
 #include <asm/sn/pcidev.h>
 #include <asm/sn/pcibus_provider_defs.h>
 #include <asm/sn/tioca_provider.h>
@@ -37,7 +38,7 @@ tioca_gart_init(struct tioca_kernel *tioca_kern)
 	uint64_t offset;
 	struct page *tmp;
 	struct tioca_common *tioca_common;
-	volatile struct tioca *ca_base;
+	struct tioca *ca_base;
 
 	tioca_common = tioca_kern->ca_common;
 	ca_base = (struct tioca *)tioca_common->ca_common.bs_base;
@@ -174,27 +175,29 @@ tioca_gart_init(struct tioca_kernel *tioca_kern)
 	 * 	DISABLE GART PREFETCHING due to hw bug tracked in SGI PV930029
 	 */
 
-	ca_base->ca_control1 |= CA_AGPDMA_OP_ENB_COMBDELAY;	/* PV895469 ? */
-	ca_base->ca_control2 &= ~(CA_GART_MEM_PARAM);
-	ca_base->ca_control2 |= (0x2ull << CA_GART_MEM_PARAM_SHFT);
+	__sn_setq_relaxed(&ca_base->ca_control1,
+			CA_AGPDMA_OP_ENB_COMBDELAY);	/* PV895469 ? */
+	__sn_clrq_relaxed(&ca_base->ca_control2, CA_GART_MEM_PARAM);
+	__sn_setq_relaxed(&ca_base->ca_control2,
+			(0x2ull << CA_GART_MEM_PARAM_SHFT));
 	tioca_kern->ca_gart_iscoherent = 1;
-	ca_base->ca_control2 &=
-	    ~(CA_GART_WR_PREFETCH_ENB | CA_GART_RD_PREFETCH_ENB);
+	__sn_clrq_relaxed(&ca_base->ca_control2,
+	    		(CA_GART_WR_PREFETCH_ENB | CA_GART_RD_PREFETCH_ENB));
 
 	/*
 	 * Unmask GART fetch error interrupts.  Clear residual errors first.
 	 */
 
-	ca_base->ca_int_status_alias = CA_GART_FETCH_ERR;
-	ca_base->ca_mult_error_alias = CA_GART_FETCH_ERR;
-	ca_base->ca_int_mask &= ~CA_GART_FETCH_ERR;
+	writeq(CA_GART_FETCH_ERR, &ca_base->ca_int_status_alias);
+	writeq(CA_GART_FETCH_ERR, &ca_base->ca_mult_error_alias);
+	__sn_clrq_relaxed(&ca_base->ca_int_mask, CA_GART_FETCH_ERR);
 
 	/*
 	 * Program the aperature and gart registers in TIOCA
 	 */
 
-	ca_base->ca_gart_aperature = ap_reg;
-	ca_base->ca_gart_ptr_table = tioca_kern->ca_gart_coretalk_addr | 1;
+	writeq(ap_reg, &ca_base->ca_gart_aperature);
+	writeq(tioca_kern->ca_gart_coretalk_addr|1, &ca_base->ca_gart_ptr_table);
 
 	return 0;
 }
@@ -211,7 +214,6 @@ void
 tioca_fastwrite_enable(struct tioca_kernel *tioca_kern)
 {
 	int cap_ptr;
-	uint64_t ca_control1;
 	uint32_t reg;
 	struct tioca *tioca_base;
 	struct pci_dev *pdev;
@@ -256,9 +258,7 @@ tioca_fastwrite_enable(struct tioca_kernel *tioca_kern)
 	 */
 
 	tioca_base = (struct tioca *)common->ca_common.bs_base;
-	ca_control1 = tioca_base->ca_control1;
-	ca_control1 |= CA_AGP_FW_ENABLE;
-	tioca_base->ca_control1 = ca_control1;
+	__sn_setq_relaxed(&tioca_base->ca_control1, CA_AGP_FW_ENABLE);
 }
 
 EXPORT_SYMBOL(tioca_fastwrite_enable);	/* used by agp-sgi */
@@ -345,7 +345,7 @@ tioca_dma_d48(struct pci_dev *pdev, uint64_t paddr)
 		return 0;
 	}
 
-	agp_dma_extn = ca_base->ca_agp_dma_addr_extn;
+	agp_dma_extn = __sn_readq_relaxed(&ca_base->ca_agp_dma_addr_extn);
 	if (node_upper != (agp_dma_extn >> CA_AGP_DMA_NODE_ID_SHFT)) {
 		printk(KERN_ERR "%s:  coretalk upper node (%u) "
 		       "mismatch with ca_agp_dma_addr_extn (%lu)\n",
diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c
index 8e75db2b825d..dda196c9e324 100644
--- a/arch/ia64/sn/pci/tioce_provider.c
+++ b/arch/ia64/sn/pci/tioce_provider.c
@@ -11,6 +11,7 @@
 #include <linux/pci.h>
 #include <asm/sn/sn_sal.h>
 #include <asm/sn/addrs.h>
+#include <asm/sn/io.h>
 #include <asm/sn/pcidev.h>
 #include <asm/sn/pcibus_provider_defs.h>
 #include <asm/sn/tioce_provider.h>
@@ -217,7 +218,7 @@ tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port,
 	if (i > last)
 		return 0;
 
-	map = kcalloc(1, sizeof(struct tioce_dmamap), GFP_ATOMIC);
+	map = kzalloc(sizeof(struct tioce_dmamap), GFP_ATOMIC);
 	if (!map)
 		return 0;
 
@@ -227,7 +228,7 @@ tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port,
 
 		ate = ATE_MAKE(addr, pagesize);
 		ate_shadow[i + j] = ate;
-		ate_reg[i + j] = ate;
+		writeq(ate, &ate_reg[i + j]);
 		addr += pagesize;
 	}
 
@@ -268,10 +269,10 @@ tioce_dma_d32(struct pci_dev *pdev, uint64_t ct_addr)
 	pcidev_to_tioce(pdev, &ce_mmr, &ce_kern, &port);
 
 	if (ce_kern->ce_port[port].dirmap_refcnt == 0) {
-		volatile uint64_t tmp;
+		uint64_t tmp;
 
 		ce_kern->ce_port[port].dirmap_shadow = ct_upper;
-		ce_mmr->ce_ure_dir_map[port] = ct_upper;
+		writeq(ct_upper, &ce_mmr->ce_ure_dir_map[port]);
 		tmp = ce_mmr->ce_ure_dir_map[port];
 		dma_ok = 1;
 	} else
@@ -343,7 +344,7 @@ tioce_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir)
 	if (TIOCE_D32_ADDR(bus_addr)) {
 		if (--ce_kern->ce_port[port].dirmap_refcnt == 0) {
 			ce_kern->ce_port[port].dirmap_shadow = 0;
-			ce_mmr->ce_ure_dir_map[port] = 0;
+			writeq(0, &ce_mmr->ce_ure_dir_map[port]);
 		}
 	} else {
 		struct tioce_dmamap *map;
@@ -554,7 +555,7 @@ tioce_kern_init(struct tioce_common *tioce_common)
 	struct tioce *tioce_mmr;
 	struct tioce_kernel *tioce_kern;
 
-	tioce_kern = kcalloc(1, sizeof(struct tioce_kernel), GFP_KERNEL);
+	tioce_kern = kzalloc(sizeof(struct tioce_kernel), GFP_KERNEL);
 	if (!tioce_kern) {
 		return NULL;
 	}
@@ -582,18 +583,18 @@ tioce_kern_init(struct tioce_common *tioce_common)
 	 */
 
 	tioce_mmr = (struct tioce *)tioce_common->ce_pcibus.bs_base;
-	tioce_mmr->ce_ure_page_map &= ~CE_URE_PAGESIZE_MASK;
-	tioce_mmr->ce_ure_page_map |= CE_URE_256K_PAGESIZE;
+	__sn_clrq_relaxed(&tioce_mmr->ce_ure_page_map, CE_URE_PAGESIZE_MASK);
+	__sn_setq_relaxed(&tioce_mmr->ce_ure_page_map, CE_URE_256K_PAGESIZE);
 	tioce_kern->ce_ate3240_pagesize = KB(256);
 
 	for (i = 0; i < TIOCE_NUM_M40_ATES; i++) {
 		tioce_kern->ce_ate40_shadow[i] = 0;
-		tioce_mmr->ce_ure_ate40[i] = 0;
+		writeq(0, &tioce_mmr->ce_ure_ate40[i]);
 	}
 
 	for (i = 0; i < TIOCE_NUM_M3240_ATES; i++) {
 		tioce_kern->ce_ate3240_shadow[i] = 0;
-		tioce_mmr->ce_ure_ate3240[i] = 0;
+		writeq(0, &tioce_mmr->ce_ure_ate3240[i]);
 	}
 
 	return tioce_kern;
@@ -665,7 +666,7 @@ tioce_force_interrupt(struct sn_irq_info *sn_irq_info)
 	default:
 		return;
 	}
-	ce_mmr->ce_adm_force_int = force_int_val;
+	writeq(force_int_val, &ce_mmr->ce_adm_force_int);
 }
 
 /**
@@ -686,6 +687,7 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info)
 	struct tioce_common *ce_common;
 	struct tioce *ce_mmr;
 	int bit;
+	uint64_t vector;
 
 	pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo;
 	if (!pcidev_info)
@@ -696,11 +698,11 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info)
 
 	bit = sn_irq_info->irq_int_bit;
 
-	ce_mmr->ce_adm_int_mask |= (1UL << bit);
-	ce_mmr->ce_adm_int_dest[bit] =
-		((uint64_t)sn_irq_info->irq_irq << INTR_VECTOR_SHFT) |
-			   sn_irq_info->irq_xtalkaddr;
-	ce_mmr->ce_adm_int_mask &= ~(1UL << bit);
+	__sn_setq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit));
+	vector = (uint64_t)sn_irq_info->irq_irq << INTR_VECTOR_SHFT;
+	vector |= sn_irq_info->irq_xtalkaddr;
+	writeq(vector, &ce_mmr->ce_adm_int_dest[bit]);
+	__sn_clrq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit));
 
 	tioce_force_interrupt(sn_irq_info);
 }
@@ -725,7 +727,7 @@ tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont
 	 * Allocate kernel bus soft and copy from prom.
 	 */
 
-	tioce_common = kcalloc(1, sizeof(struct tioce_common), GFP_KERNEL);
+	tioce_common = kzalloc(sizeof(struct tioce_common), GFP_KERNEL);
 	if (!tioce_common)
 		return NULL;
 
diff --git a/arch/m32r/Makefile b/arch/m32r/Makefile
index dd4418d846e9..983d438b14b6 100644
--- a/arch/m32r/Makefile
+++ b/arch/m32r/Makefile
@@ -24,7 +24,7 @@ aflags-$(CONFIG_ISA_M32R)	+= -DNO_FPU -Wa,-no-bitinst
 CFLAGS += $(cflags-y)
 AFLAGS += $(aflags-y)
 
-CHECKFLAGS	:= $(CHECK) -D__m32r__
+CHECKFLAGS	+= -D__m32r__ -D__BIG_ENDIAN__=1
 
 head-y	:= arch/m32r/kernel/head.o arch/m32r/kernel/init_task.o
 
diff --git a/arch/m32r/kernel/entry.S b/arch/m32r/kernel/entry.S
index dddbf6b5ed2c..396c94218cc2 100644
--- a/arch/m32r/kernel/entry.S
+++ b/arch/m32r/kernel/entry.S
@@ -653,8 +653,6 @@ ENTRY(rie_handler)
 	SAVE_ALL
 	mvfc	r0, bpc
 	ld	r1, @r0
-	seth	r0, #0xa0f0
-	st	r1, @r0
 	ldi	r1, #0x20			; error_code
 	mv	r0, sp				; pt_regs
 	bl	do_rie_handler
@@ -681,6 +679,15 @@ ENTRY(debug_trap)
 	bl	do_debug_trap
 	bra	error_code
 
+ENTRY(ill_trap)
+	/* void ill_trap(void) */
+	SWITCH_TO_KERNEL_STACK
+	SAVE_ALL
+	ldi	r1, #0				; error_code ; FIXME
+	mv	r0, sp				; pt_regs
+	bl	do_ill_trap
+	bra	error_code
+
 
 /* Cache flushing handler */
 ENTRY(cache_flushing_handler)
diff --git a/arch/m32r/kernel/io_m32700ut.c b/arch/m32r/kernel/io_m32700ut.c
index e545b065f7e9..eda9f963c1eb 100644
--- a/arch/m32r/kernel/io_m32700ut.c
+++ b/arch/m32r/kernel/io_m32700ut.c
@@ -64,11 +64,11 @@ static inline void *__port2addr_ata(unsigned long port)
  * from 0x10000000 to 0x13ffffff on physical address.
  * The base address of LAN controller(LAN91C111) is 0x300.
  */
-#define LAN_IOSTART	0x300
-#define LAN_IOEND	0x320
+#define LAN_IOSTART	0xa0000300
+#define LAN_IOEND	0xa0000320
 static inline void *_port2addr_ne(unsigned long port)
 {
-	return (void *)(port + NONCACHE_OFFSET + 0x10000000);
+	return (void *)(port + 0x10000000);
 }
 static inline void *_port2addr_usb(unsigned long port)
 {
diff --git a/arch/m32r/kernel/io_mappi.c b/arch/m32r/kernel/io_mappi.c
index 78033165fb5c..3c3da042fbd1 100644
--- a/arch/m32r/kernel/io_mappi.c
+++ b/arch/m32r/kernel/io_mappi.c
@@ -31,7 +31,7 @@ extern void pcc_iowrite(int, unsigned long, void *, size_t, size_t, int);
 
 static inline void *_port2addr(unsigned long port)
 {
-	return (void *)(port + NONCACHE_OFFSET);
+	return (void *)(port | (NONCACHE_OFFSET));
 }
 
 static inline void *_port2addr_ne(unsigned long port)
diff --git a/arch/m32r/kernel/io_mappi2.c b/arch/m32r/kernel/io_mappi2.c
index 5c03504bf653..df3c729cb3e0 100644
--- a/arch/m32r/kernel/io_mappi2.c
+++ b/arch/m32r/kernel/io_mappi2.c
@@ -33,12 +33,9 @@ extern void pcc_iowrite_word(int, unsigned long, void *, size_t, size_t, int);
 
 static inline void *_port2addr(unsigned long port)
 {
-	return (void *)(port + NONCACHE_OFFSET);
+	return (void *)(port | (NONCACHE_OFFSET));
 }
 
-#define LAN_IOSTART	0x300
-#define LAN_IOEND	0x320
-
 #if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
 static inline void *__port2addr_ata(unsigned long port)
 {
@@ -59,15 +56,17 @@ static inline void *__port2addr_ata(unsigned long port)
 }
 #endif
 
+#define LAN_IOSTART	0xa0000300
+#define LAN_IOEND	0xa0000320
 #ifdef CONFIG_CHIP_OPSP
 static inline void *_port2addr_ne(unsigned long port)
 {
-	return (void *)(port + NONCACHE_OFFSET + 0x10000000);
+	return (void *)(port + 0x10000000);
 }
 #else
 static inline void *_port2addr_ne(unsigned long port)
 {
-	return (void *)(port + NONCACHE_OFFSET + 0x04000000);
+	return (void *)(port + 0x04000000);
 }
 #endif
 static inline void *_port2addr_usb(unsigned long port)
diff --git a/arch/m32r/kernel/io_mappi3.c b/arch/m32r/kernel/io_mappi3.c
index c80bde657854..f80321a58764 100644
--- a/arch/m32r/kernel/io_mappi3.c
+++ b/arch/m32r/kernel/io_mappi3.c
@@ -36,15 +36,13 @@ static inline void *_port2addr(unsigned long port)
 	return (void *)(port + NONCACHE_OFFSET);
 }
 
-#define LAN_IOSTART	0x300
-#define LAN_IOEND	0x320
-
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+#if defined(CONFIG_IDE)
 static inline void *__port2addr_ata(unsigned long port)
 {
 	static int	dummy_reg;
 
 	switch (port) {
+	  /* IDE0 CF */
 	case 0x1f0:	return (void *)0xb4002000;
 	case 0x1f1:	return (void *)0xb4012800;
 	case 0x1f2:	return (void *)0xb4012002;
@@ -54,14 +52,27 @@ static inline void *__port2addr_ata(unsigned long port)
 	case 0x1f6:	return (void *)0xb4012006;
 	case 0x1f7:	return (void *)0xb4012806;
 	case 0x3f6:	return (void *)0xb401200e;
+	  /* IDE1 IDE */
+	case 0x170:	return (void *)0xb4810000;  /* Data 16bit */
+	case 0x171:	return (void *)0xb4810002;  /* Features / Error */
+	case 0x172:	return (void *)0xb4810004;  /* Sector count */
+	case 0x173:	return (void *)0xb4810006;  /* Sector number */
+	case 0x174:	return (void *)0xb4810008;  /* Cylinder low */
+	case 0x175:	return (void *)0xb481000a;  /* Cylinder high */
+	case 0x176:	return (void *)0xb481000c;  /* Device head */
+	case 0x177:	return (void *)0xb481000e;  /* Command     */
+	case 0x376:	return (void *)0xb480800c;  /* Device control / Alt status */
+
 	default: 	return (void *)&dummy_reg;
 	}
 }
 #endif
 
+#define LAN_IOSTART	0xa0000300
+#define LAN_IOEND	0xa0000320
 static inline void *_port2addr_ne(unsigned long port)
 {
-	return (void *)(port + NONCACHE_OFFSET + 0x10000000);
+	return (void *)(port + 0x10000000);
 }
 
 static inline void *_port2addr_usb(unsigned long port)
@@ -109,8 +120,9 @@ unsigned char _inb(unsigned long port)
 {
 	if (port >= LAN_IOSTART && port < LAN_IOEND)
 		return _ne_inb(PORT2ADDR_NE(port));
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
-	else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+#if defined(CONFIG_IDE)
+	else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) ||
+		  ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){
 		return *(volatile unsigned char *)__port2addr_ata(port);
 	}
 #endif
@@ -128,8 +140,9 @@ unsigned short _inw(unsigned long port)
 {
 	if (port >= LAN_IOSTART && port < LAN_IOEND)
 		return _ne_inw(PORT2ADDR_NE(port));
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
-	else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+#if defined(CONFIG_IDE)
+	else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) ||
+		  ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){
 		return *(volatile unsigned short *)__port2addr_ata(port);
 	}
 #endif
@@ -186,8 +199,9 @@ void _outb(unsigned char b, unsigned long port)
 	if (port >= LAN_IOSTART && port < LAN_IOEND)
 		_ne_outb(b, PORT2ADDR_NE(port));
 	else
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
-	if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+#if defined(CONFIG_IDE)
+	if ( ((port >= 0x170 && port <=0x177) || port == 0x376) ||
+		  ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){
 		*(volatile unsigned char *)__port2addr_ata(port) = b;
 	} else
 #endif
@@ -204,8 +218,9 @@ void _outw(unsigned short w, unsigned long port)
 	if (port >= LAN_IOSTART && port < LAN_IOEND)
 		_ne_outw(w, PORT2ADDR_NE(port));
 	else
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
-	if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+#if defined(CONFIG_IDE)
+	if ( ((port >= 0x170 && port <=0x177) || port == 0x376) ||
+		  ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){
 		*(volatile unsigned short *)__port2addr_ata(port) = w;
 	} else
 #endif
@@ -254,8 +269,9 @@ void _insb(unsigned int port, void * addr, unsigned long count)
 {
 	if (port >= LAN_IOSTART && port < LAN_IOEND)
 		_ne_insb(PORT2ADDR_NE(port), addr, count);
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
-	else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+#if defined(CONFIG_IDE)
+	else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) ||
+		  ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){
 		unsigned char *buf = addr;
 		unsigned char *portp = __port2addr_ata(port);
 		while (count--)
@@ -290,8 +306,9 @@ void _insw(unsigned int port, void * addr, unsigned long count)
 		pcc_ioread_word(9, port, (void *)addr, sizeof(unsigned short),
 				count, 1);
 #endif
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
-	} else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+#if defined(CONFIG_IDE)
+	} else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) ||
+		  ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){
 		portp = __port2addr_ata(port);
 		while (count--)
 			*buf++ = *(volatile unsigned short *)portp;
@@ -322,8 +339,9 @@ void _outsb(unsigned int port, const void * addr, unsigned long count)
 		portp = PORT2ADDR_NE(port);
 		while (count--)
 			_ne_outb(*buf++, portp);
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
-	} else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+#if defined(CONFIG_IDE)
+	} else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) ||
+		  ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){
 		portp = __port2addr_ata(port);
 		while (count--)
 			*(volatile unsigned char *)portp = *buf++;
@@ -349,8 +367,9 @@ void _outsw(unsigned int port, const void * addr, unsigned long count)
 		portp = PORT2ADDR_NE(port);
 		while (count--)
 			*(volatile unsigned short *)portp = *buf++;
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
-	} else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+#if defined(CONFIG_IDE)
+	} else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) ||
+		  ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){
 		portp = __port2addr_ata(port);
 		while (count--)
 			*(volatile unsigned short *)portp = *buf++;
diff --git a/arch/m32r/kernel/io_oaks32r.c b/arch/m32r/kernel/io_oaks32r.c
index 9997dddd24d7..8be323931e4a 100644
--- a/arch/m32r/kernel/io_oaks32r.c
+++ b/arch/m32r/kernel/io_oaks32r.c
@@ -16,7 +16,7 @@
 
 static inline void *_port2addr(unsigned long port)
 {
-	return (void *)(port + NONCACHE_OFFSET);
+	return (void *)(port | (NONCACHE_OFFSET));
 }
 
 static inline  void *_port2addr_ne(unsigned long port)
diff --git a/arch/m32r/kernel/io_opsput.c b/arch/m32r/kernel/io_opsput.c
index e34951e8156f..4793bd18e115 100644
--- a/arch/m32r/kernel/io_opsput.c
+++ b/arch/m32r/kernel/io_opsput.c
@@ -36,7 +36,7 @@ extern void pcc_iowrite_word(int, unsigned long, void *, size_t, size_t, int);
 
 static inline void *_port2addr(unsigned long port)
 {
-	return (void *)(port + NONCACHE_OFFSET);
+	return (void *)(port | (NONCACHE_OFFSET));
 }
 
 /*
@@ -44,11 +44,11 @@ static inline void *_port2addr(unsigned long port)
  * from 0x10000000 to 0x13ffffff on physical address.
  * The base address of LAN controller(LAN91C111) is 0x300.
  */
-#define LAN_IOSTART	0x300
-#define LAN_IOEND	0x320
+#define LAN_IOSTART	0xa0000300
+#define LAN_IOEND	0xa0000320
 static inline void *_port2addr_ne(unsigned long port)
 {
-	return (void *)(port + NONCACHE_OFFSET + 0x10000000);
+	return (void *)(port + 0x10000000);
 }
 static inline void *_port2addr_usb(unsigned long port)
 {
diff --git a/arch/m32r/kernel/io_usrv.c b/arch/m32r/kernel/io_usrv.c
index 9eb161dcc104..39a379af40bc 100644
--- a/arch/m32r/kernel/io_usrv.c
+++ b/arch/m32r/kernel/io_usrv.c
@@ -47,7 +47,7 @@ static inline void *_port2addr(unsigned long port)
 	else if (port >= UART1_IOSTART && port <= UART1_IOEND)
 		port = ((port - UART1_IOSTART) << 1) + UART1_REGSTART;
 #endif	/* CONFIG_SERIAL_8250 || CONFIG_SERIAL_8250_MODULE */
-	return (void *)(port + NONCACHE_OFFSET);
+	return (void *)(port | (NONCACHE_OFFSET));
 }
 
 static inline void delay(void)
diff --git a/arch/m32r/kernel/process.c b/arch/m32r/kernel/process.c
index ea13a8f4d8b0..cc4b571e5db7 100644
--- a/arch/m32r/kernel/process.c
+++ b/arch/m32r/kernel/process.c
@@ -104,7 +104,9 @@ void cpu_idle (void)
 
 			idle();
 		}
+		preempt_enable_no_resched();
 		schedule();
+		preempt_disable();
 	}
 }
 
diff --git a/arch/m32r/kernel/ptrace.c b/arch/m32r/kernel/ptrace.c
index 124f7c1b775e..078d2a0e71c2 100644
--- a/arch/m32r/kernel/ptrace.c
+++ b/arch/m32r/kernel/ptrace.c
@@ -756,7 +756,7 @@ do_ptrace(long request, struct task_struct *child, long addr, long data)
 	return ret;
 }
 
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
 {
 	struct task_struct *child;
 	int ret;
diff --git a/arch/m32r/kernel/setup.c b/arch/m32r/kernel/setup.c
index ec5674727e7f..f722ec8eb021 100644
--- a/arch/m32r/kernel/setup.c
+++ b/arch/m32r/kernel/setup.c
@@ -305,19 +305,19 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 
 	seq_printf(m, "processor\t: %ld\n", cpu);
 
-#ifdef CONFIG_CHIP_VDEC2
+#if defined(CONFIG_CHIP_VDEC2)
 	seq_printf(m, "cpu family\t: VDEC2\n"
 		"cache size\t: Unknown\n");
-#elif  CONFIG_CHIP_M32700
+#elif defined(CONFIG_CHIP_M32700)
 	seq_printf(m,"cpu family\t: M32700\n"
 		"cache size\t: I-8KB/D-8KB\n");
-#elif  CONFIG_CHIP_M32102
+#elif defined(CONFIG_CHIP_M32102)
 	seq_printf(m,"cpu family\t: M32102\n"
 		"cache size\t: I-8KB\n");
-#elif  CONFIG_CHIP_OPSP
+#elif defined(CONFIG_CHIP_OPSP)
 	seq_printf(m,"cpu family\t: OPSP\n"
 		"cache size\t: I-8KB/D-8KB\n");
-#elif  CONFIG_CHIP_MP
+#elif defined(CONFIG_CHIP_MP)
 	seq_printf(m, "cpu family\t: M32R-MP\n"
 		"cache size\t: I-xxKB/D-xxKB\n");
 #else
@@ -326,19 +326,19 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	seq_printf(m, "bogomips\t: %lu.%02lu\n",
 		c->loops_per_jiffy/(500000/HZ),
 		(c->loops_per_jiffy/(5000/HZ)) % 100);
-#ifdef CONFIG_PLAT_MAPPI
+#if defined(CONFIG_PLAT_MAPPI)
 	seq_printf(m, "Machine\t\t: Mappi Evaluation board\n");
-#elif CONFIG_PLAT_MAPPI2
+#elif defined(CONFIG_PLAT_MAPPI2)
 	seq_printf(m, "Machine\t\t: Mappi-II Evaluation board\n");
-#elif CONFIG_PLAT_MAPPI3
+#elif defined(CONFIG_PLAT_MAPPI3)
 	seq_printf(m, "Machine\t\t: Mappi-III Evaluation board\n");
-#elif  CONFIG_PLAT_M32700UT
+#elif defined(CONFIG_PLAT_M32700UT)
 	seq_printf(m, "Machine\t\t: M32700UT Evaluation board\n");
-#elif  CONFIG_PLAT_OPSPUT
+#elif defined(CONFIG_PLAT_OPSPUT)
 	seq_printf(m, "Machine\t\t: OPSPUT Evaluation board\n");
-#elif  CONFIG_PLAT_USRV
+#elif defined(CONFIG_PLAT_USRV)
 	seq_printf(m, "Machine\t\t: uServer\n");
-#elif  CONFIG_PLAT_OAKS32R
+#elif defined(CONFIG_PLAT_OAKS32R)
 	seq_printf(m, "Machine\t\t: OAKS32R\n");
 #else
 	seq_printf(m, "Machine\t\t: Unknown\n");
diff --git a/arch/m32r/kernel/setup_m32700ut.c b/arch/m32r/kernel/setup_m32700ut.c
index 708634b685e4..cb76916b014d 100644
--- a/arch/m32r/kernel/setup_m32700ut.c
+++ b/arch/m32r/kernel/setup_m32700ut.c
@@ -15,7 +15,7 @@
 #include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/system.h>
 #include <asm/m32r.h>
diff --git a/arch/m32r/kernel/setup_mappi.c b/arch/m32r/kernel/setup_mappi.c
index 4e709809efc5..501d798cf050 100644
--- a/arch/m32r/kernel/setup_mappi.c
+++ b/arch/m32r/kernel/setup_mappi.c
@@ -11,7 +11,7 @@
 #include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/system.h>
 #include <asm/m32r.h>
diff --git a/arch/m32r/kernel/setup_mappi2.c b/arch/m32r/kernel/setup_mappi2.c
index a1d801598aa4..7f2db5bfd626 100644
--- a/arch/m32r/kernel/setup_mappi2.c
+++ b/arch/m32r/kernel/setup_mappi2.c
@@ -11,7 +11,7 @@
 #include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/system.h>
 #include <asm/m32r.h>
diff --git a/arch/m32r/kernel/setup_mappi3.c b/arch/m32r/kernel/setup_mappi3.c
index a76412e883e8..f6ecdf7f555c 100644
--- a/arch/m32r/kernel/setup_mappi3.c
+++ b/arch/m32r/kernel/setup_mappi3.c
@@ -11,7 +11,7 @@
 #include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/system.h>
 #include <asm/m32r.h>
@@ -151,7 +151,7 @@ void __init init_IRQ(void)
 	disable_mappi3_irq(M32R_IRQ_INT1);
 #endif /* CONFIG_USB */
 
-	/* ICUCR40: CFC IREQ */
+	/* CFC IREQ */
 	irq_desc[PLD_IRQ_CFIREQ].status = IRQ_DISABLED;
 	irq_desc[PLD_IRQ_CFIREQ].handler = &mappi3_irq_type;
 	irq_desc[PLD_IRQ_CFIREQ].action = 0;
@@ -160,7 +160,7 @@ void __init init_IRQ(void)
 	disable_mappi3_irq(PLD_IRQ_CFIREQ);
 
 #if defined(CONFIG_M32R_CFC)
-	/* ICUCR41: CFC Insert */
+	/* ICUCR41: CFC Insert & eject */
 	irq_desc[PLD_IRQ_CFC_INSERT].status = IRQ_DISABLED;
 	irq_desc[PLD_IRQ_CFC_INSERT].handler = &mappi3_irq_type;
 	irq_desc[PLD_IRQ_CFC_INSERT].action = 0;
@@ -168,14 +168,16 @@ void __init init_IRQ(void)
 	icu_data[PLD_IRQ_CFC_INSERT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD00;
 	disable_mappi3_irq(PLD_IRQ_CFC_INSERT);
 
-	/* ICUCR42: CFC Eject */
-	irq_desc[PLD_IRQ_CFC_EJECT].status = IRQ_DISABLED;
-	irq_desc[PLD_IRQ_CFC_EJECT].handler = &mappi3_irq_type;
-	irq_desc[PLD_IRQ_CFC_EJECT].action = 0;
-	irq_desc[PLD_IRQ_CFC_EJECT].depth = 1;	/* disable nested irq */
-	icu_data[PLD_IRQ_CFC_EJECT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10;
-	disable_mappi3_irq(PLD_IRQ_CFC_EJECT);
 #endif /* CONFIG_M32R_CFC */
+
+	/* IDE IREQ */
+	irq_desc[PLD_IRQ_IDEIREQ].status = IRQ_DISABLED;
+	irq_desc[PLD_IRQ_IDEIREQ].handler = &mappi3_irq_type;
+	irq_desc[PLD_IRQ_IDEIREQ].action = 0;
+	irq_desc[PLD_IRQ_IDEIREQ].depth = 1;	/* disable nested irq */
+	icu_data[PLD_IRQ_IDEIREQ].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10;
+	disable_mappi3_irq(PLD_IRQ_IDEIREQ);
+
 }
 
 #if defined(CONFIG_SMC91X)
diff --git a/arch/m32r/kernel/setup_opsput.c b/arch/m32r/kernel/setup_opsput.c
index d7b7ec6d30f8..1fbb140854e7 100644
--- a/arch/m32r/kernel/setup_opsput.c
+++ b/arch/m32r/kernel/setup_opsput.c
@@ -16,7 +16,7 @@
 #include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/system.h>
 #include <asm/m32r.h>
diff --git a/arch/m32r/kernel/smp.c b/arch/m32r/kernel/smp.c
index a4576ac7e870..8b1f6eb76870 100644
--- a/arch/m32r/kernel/smp.c
+++ b/arch/m32r/kernel/smp.c
@@ -275,12 +275,14 @@ static void flush_tlb_all_ipi(void *info)
  *==========================================================================*/
 void smp_flush_tlb_mm(struct mm_struct *mm)
 {
-	int cpu_id = smp_processor_id();
+	int cpu_id;
 	cpumask_t cpu_mask;
-	unsigned long *mmc = &mm->context[cpu_id];
+	unsigned long *mmc;
 	unsigned long flags;
 
 	preempt_disable();
+	cpu_id = smp_processor_id();
+	mmc = &mm->context[cpu_id];
 	cpu_mask = mm->cpu_vm_mask;
 	cpu_clear(cpu_id, cpu_mask);
 
@@ -343,12 +345,14 @@ void smp_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 void smp_flush_tlb_page(struct vm_area_struct *vma, unsigned long va)
 {
 	struct mm_struct *mm = vma->vm_mm;
-	int cpu_id = smp_processor_id();
+	int cpu_id;
 	cpumask_t cpu_mask;
-	unsigned long *mmc = &mm->context[cpu_id];
+	unsigned long *mmc;
 	unsigned long flags;
 
 	preempt_disable();
+	cpu_id = smp_processor_id();
+	mmc = &mm->context[cpu_id];
 	cpu_mask = mm->cpu_vm_mask;
 	cpu_clear(cpu_id, cpu_mask);
 
diff --git a/arch/m32r/kernel/smpboot.c b/arch/m32r/kernel/smpboot.c
index 640d592ea072..b90c54169fa5 100644
--- a/arch/m32r/kernel/smpboot.c
+++ b/arch/m32r/kernel/smpboot.c
@@ -426,6 +426,7 @@ void __init smp_cpus_done(unsigned int max_cpus)
 int __init start_secondary(void *unused)
 {
 	cpu_init();
+	preempt_disable();
 	smp_callin();
 	while (!cpu_isset(smp_processor_id(), smp_commenced_mask))
 		cpu_relax();
diff --git a/arch/m32r/kernel/sys_m32r.c b/arch/m32r/kernel/sys_m32r.c
index e0500e12c5fb..fe55b28d3725 100644
--- a/arch/m32r/kernel/sys_m32r.c
+++ b/arch/m32r/kernel/sys_m32r.c
@@ -41,7 +41,8 @@ asmlinkage int sys_tas(int *addr)
 		return -EFAULT;
 	local_irq_save(flags);
 	oldval = *addr;
-	*addr = 1;
+	if (!oldval)
+		*addr = 1;
 	local_irq_restore(flags);
 	return oldval;
 }
@@ -59,7 +60,8 @@ asmlinkage int sys_tas(int *addr)
 
 	_raw_spin_lock(&tas_lock);
 	oldval = *addr;
-	*addr = 1;
+	if (!oldval)
+		*addr = 1;
 	_raw_spin_unlock(&tas_lock);
 
 	return oldval;
diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c
index 539c562cd54d..2ebce2063fea 100644
--- a/arch/m32r/kernel/time.c
+++ b/arch/m32r/kernel/time.c
@@ -39,10 +39,6 @@ extern void send_IPI_allbutself(int, int);
 extern void smp_local_timer_interrupt(struct pt_regs *);
 #endif
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 extern unsigned long wall_jiffies;
 #define TICK_SIZE	(tick_nsec / 1000)
 
diff --git a/arch/m32r/kernel/traps.c b/arch/m32r/kernel/traps.c
index 01922271d17e..5fe8ed6d62dc 100644
--- a/arch/m32r/kernel/traps.c
+++ b/arch/m32r/kernel/traps.c
@@ -5,8 +5,6 @@
  *                            Hitoshi Yamamoto
  */
 
-/* $Id$ */
-
 /*
  * 'traps.c' handles hardware traps and faults after we have saved some
  * state in 'entry.S'.
@@ -35,6 +33,7 @@ asmlinkage void ei_handler(void);
 asmlinkage void rie_handler(void);
 asmlinkage void debug_trap(void);
 asmlinkage void cache_flushing_handler(void);
+asmlinkage void ill_trap(void);
 
 #ifdef CONFIG_SMP
 extern void smp_reschedule_interrupt(void);
@@ -77,22 +76,22 @@ void	set_eit_vector_entries(void)
 	eit_vector[5] = BRA_INSN(default_eit_handler, 5);
 	eit_vector[8] = BRA_INSN(rie_handler, 8);
 	eit_vector[12] = BRA_INSN(alignment_check, 12);
-	eit_vector[16] = 0xff000000UL;
+	eit_vector[16] = BRA_INSN(ill_trap, 16);
 	eit_vector[17] = BRA_INSN(debug_trap, 17);
 	eit_vector[18] = BRA_INSN(system_call, 18);
-	eit_vector[19] = 0xff000000UL;
-	eit_vector[20] = 0xff000000UL;
-	eit_vector[21] = 0xff000000UL;
-	eit_vector[22] = 0xff000000UL;
-	eit_vector[23] = 0xff000000UL;
-	eit_vector[24] = 0xff000000UL;
-	eit_vector[25] = 0xff000000UL;
-	eit_vector[26] = 0xff000000UL;
-	eit_vector[27] = 0xff000000UL;
+	eit_vector[19] = BRA_INSN(ill_trap, 19);
+	eit_vector[20] = BRA_INSN(ill_trap, 20);
+	eit_vector[21] = BRA_INSN(ill_trap, 21);
+	eit_vector[22] = BRA_INSN(ill_trap, 22);
+	eit_vector[23] = BRA_INSN(ill_trap, 23);
+	eit_vector[24] = BRA_INSN(ill_trap, 24);
+	eit_vector[25] = BRA_INSN(ill_trap, 25);
+	eit_vector[26] = BRA_INSN(ill_trap, 26);
+	eit_vector[27] = BRA_INSN(ill_trap, 27);
 	eit_vector[28] = BRA_INSN(cache_flushing_handler, 28);
-	eit_vector[29] = 0xff000000UL;
-	eit_vector[30] = 0xff000000UL;
-	eit_vector[31] = 0xff000000UL;
+	eit_vector[29] = BRA_INSN(ill_trap, 29);
+	eit_vector[30] = BRA_INSN(ill_trap, 30);
+	eit_vector[31] = BRA_INSN(ill_trap, 31);
 	eit_vector[32] = BRA_INSN(ei_handler, 32);
 	eit_vector[64] = BRA_INSN(pie_handler, 64);
 #ifdef CONFIG_MMU
@@ -286,7 +285,8 @@ asmlinkage void do_##name(struct pt_regs * regs, long error_code) \
 
 DO_ERROR( 1, SIGTRAP, "debug trap", debug_trap)
 DO_ERROR_INFO(0x20, SIGILL,  "reserved instruction ", rie_handler, ILL_ILLOPC, regs->bpc)
-DO_ERROR_INFO(0x100, SIGILL,  "privilege instruction", pie_handler, ILL_PRVOPC, regs->bpc)
+DO_ERROR_INFO(0x100, SIGILL,  "privileged instruction", pie_handler, ILL_PRVOPC, regs->bpc)
+DO_ERROR_INFO(-1, SIGILL,  "illegal trap", ill_trap, ILL_ILLTRP, regs->bpc)
 
 extern int handle_unaligned_access(unsigned long, struct pt_regs *);
 
@@ -329,4 +329,3 @@ asmlinkage void do_alignment_check(struct pt_regs *regs, long error_code)
 		set_fs(oldfs);
 	}
 }
-
diff --git a/arch/m32r/lib/csum_partial_copy.c b/arch/m32r/lib/csum_partial_copy.c
index ddb16a83a8ce..3d5f06145854 100644
--- a/arch/m32r/lib/csum_partial_copy.c
+++ b/arch/m32r/lib/csum_partial_copy.c
@@ -18,10 +18,10 @@
 
 #include <linux/module.h>
 #include <linux/types.h>
+#include <linux/string.h>
 
 #include <net/checksum.h>
 #include <asm/byteorder.h>
-#include <asm/string.h>
 #include <asm/uaccess.h>
 
 /*
diff --git a/arch/m32r/lib/usercopy.c b/arch/m32r/lib/usercopy.c
index 6c6855f1aa05..ce16bbe26a52 100644
--- a/arch/m32r/lib/usercopy.c
+++ b/arch/m32r/lib/usercopy.c
@@ -13,7 +13,7 @@
 #include <asm/uaccess.h>
 
 unsigned long
-__generic_copy_to_user(void *to, const void *from, unsigned long n)
+__generic_copy_to_user(void __user *to, const void *from, unsigned long n)
 {
 	prefetch(from);
 	if (access_ok(VERIFY_WRITE, to, n))
@@ -22,7 +22,7 @@ __generic_copy_to_user(void *to, const void *from, unsigned long n)
 }
 
 unsigned long
-__generic_copy_from_user(void *to, const void *from, unsigned long n)
+__generic_copy_from_user(void *to, const void __user *from, unsigned long n)
 {
 	prefetchw(to);
 	if (access_ok(VERIFY_READ, from, n))
@@ -111,7 +111,7 @@ do {									\
 #endif /* CONFIG_ISA_DUAL_ISSUE */
 
 long
-__strncpy_from_user(char *dst, const char *src, long count)
+__strncpy_from_user(char *dst, const char __user *src, long count)
 {
 	long res;
 	__do_strncpy_from_user(dst, src, count, res);
@@ -119,7 +119,7 @@ __strncpy_from_user(char *dst, const char *src, long count)
 }
 
 long
-strncpy_from_user(char *dst, const char *src, long count)
+strncpy_from_user(char *dst, const char __user *src, long count)
 {
 	long res = -EFAULT;
 	if (access_ok(VERIFY_READ, src, 1))
@@ -222,7 +222,7 @@ do {									\
 #endif /* not CONFIG_ISA_DUAL_ISSUE */
 
 unsigned long
-clear_user(void *to, unsigned long n)
+clear_user(void __user *to, unsigned long n)
 {
 	if (access_ok(VERIFY_WRITE, to, n))
 		__do_clear_user(to, n);
@@ -230,7 +230,7 @@ clear_user(void *to, unsigned long n)
 }
 
 unsigned long
-__clear_user(void *to, unsigned long n)
+__clear_user(void __user *to, unsigned long n)
 {
 	__do_clear_user(to, n);
 	return n;
@@ -244,7 +244,7 @@ __clear_user(void *to, unsigned long n)
 
 #ifdef CONFIG_ISA_DUAL_ISSUE
 
-long strnlen_user(const char *s, long n)
+long strnlen_user(const char __user *s, long n)
 {
 	unsigned long mask = -__addr_ok(s);
 	unsigned long res;
@@ -313,7 +313,7 @@ long strnlen_user(const char *s, long n)
 
 #else /* not CONFIG_ISA_DUAL_ISSUE */
 
-long strnlen_user(const char *s, long n)
+long strnlen_user(const char __user *s, long n)
 {
 	unsigned long mask = -__addr_ok(s);
 	unsigned long res;
diff --git a/arch/m32r/mm/init.c b/arch/m32r/mm/init.c
index d9a40b1fe8ba..6facf15b04f3 100644
--- a/arch/m32r/mm/init.c
+++ b/arch/m32r/mm/init.c
@@ -48,6 +48,8 @@ void show_mem(void)
 	show_free_areas();
 	printk("Free swap:       %6ldkB\n",nr_swap_pages<<(PAGE_SHIFT-10));
 	for_each_pgdat(pgdat) {
+		unsigned long flags;
+		pgdat_resize_lock(pgdat, &flags);
 		for (i = 0; i < pgdat->node_spanned_pages; ++i) {
 			page = pgdat_page_nr(pgdat, i);
 			total++;
@@ -60,6 +62,7 @@ void show_mem(void)
 			else if (page_count(page))
 				shared += page_count(page) - 1;
 		}
+		pgdat_resize_unlock(pgdat, &flags);
 	}
 	printk("%d pages of RAM\n", total);
 	printk("%d pages of HIGHMEM\n",highmem);
@@ -150,10 +153,14 @@ int __init reservedpages_count(void)
 	int reservedpages, nid, i;
 
 	reservedpages = 0;
-	for_each_online_node(nid)
+	for_each_online_node(nid) {
+		unsigned long flags;
+		pgdat_resize_lock(NODE_DATA(nid), &flags);
 		for (i = 0 ; i < MAX_LOW_PFN(nid) - START_PFN(nid) ; i++)
 			if (PageReserved(nid_page_nr(nid, i)))
 				reservedpages++;
+		pgdat_resize_unlock(NODE_DATA(nid), &flags);
+	}
 
 	return reservedpages;
 }
diff --git a/arch/m32r/mm/ioremap.c b/arch/m32r/mm/ioremap.c
index 70c59055c19c..a151849a605e 100644
--- a/arch/m32r/mm/ioremap.c
+++ b/arch/m32r/mm/ioremap.c
@@ -67,7 +67,7 @@ remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned long size,
 	if (address >= end)
 		BUG();
 	do {
-		pte_t * pte = pte_alloc_kernel(&init_mm, pmd, address);
+		pte_t * pte = pte_alloc_kernel(pmd, address);
 		if (!pte)
 			return -ENOMEM;
 		remap_area_pte(pte, address, end - address, address + phys_addr, flags);
@@ -90,7 +90,6 @@ remap_area_pages(unsigned long address, unsigned long phys_addr,
 	flush_cache_all();
 	if (address >= end)
 		BUG();
-	spin_lock(&init_mm.page_table_lock);
 	do {
 		pmd_t *pmd;
 		pmd = pmd_alloc(&init_mm, dir, address);
@@ -104,7 +103,6 @@ remap_area_pages(unsigned long address, unsigned long phys_addr,
 		address = (address + PGDIR_SIZE) & PGDIR_MASK;
 		dir++;
 	} while (address && (address < end));
-	spin_unlock(&init_mm.page_table_lock);
 	flush_tlb_all();
 	return error;
 }
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index ba960bbc8e6d..1dd5d18b2201 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -388,33 +388,11 @@ config AMIGA_PCMCIA
 	  Include support in the kernel for pcmcia on Amiga 1200 and Amiga
 	  600. If you intend to use pcmcia cards say Y; otherwise say N.
 
-config STRAM_SWAP
-	bool "Support for ST-RAM as swap space"
-	depends on ATARI && BROKEN
-	---help---
-	  Some Atari 68k machines (including the 520STF and 1020STE) divide
-	  their addressable memory into ST and TT sections.  The TT section
-	  (up to 512MB) is the main memory; the ST section (up to 4MB) is
-	  accessible to the built-in graphics board, runs slower, and is
-	  present mainly for backward compatibility with older machines.
-
-	  This enables support for using (parts of) ST-RAM as swap space,
-	  instead of as normal system memory. This can first enhance system
-	  performance if you have lots of alternate RAM (compared to the size
-	  of ST-RAM), because executable code always will reside in faster
-	  memory. ST-RAM will remain as ultra-fast swap space. On the other
-	  hand, it allows much improved dynamic allocations of ST-RAM buffers
-	  for device driver modules (e.g. floppy, ACSI, SLM printer, DMA
-	  sound). The probability that such allocations at module load time
-	  fail is drastically reduced.
-
 config STRAM_PROC
 	bool "ST-RAM statistics in /proc"
 	depends on ATARI
 	help
-	  Say Y here to report ST-RAM usage statistics in /proc/stram.  See
-	  the help for CONFIG_STRAM_SWAP for discussion of ST-RAM and its
-	  uses.
+	  Say Y here to report ST-RAM usage statistics in /proc/stram.
 
 config HEARTBEAT
 	bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || MAC ||Q40
diff --git a/arch/m68k/atari/stram.c b/arch/m68k/atari/stram.c
index 5a3c106b40c8..22e0481a5f7b 100644
--- a/arch/m68k/atari/stram.c
+++ b/arch/m68k/atari/stram.c
@@ -15,11 +15,9 @@
 #include <linux/kdev_t.h>
 #include <linux/major.h>
 #include <linux/init.h>
-#include <linux/swap.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/pagemap.h>
-#include <linux/shm.h>
 #include <linux/bootmem.h>
 #include <linux/mount.h>
 #include <linux/blkdev.h>
@@ -33,8 +31,6 @@
 #include <asm/io.h>
 #include <asm/semaphore.h>
 
-#include <linux/swapops.h>
-
 #undef DEBUG
 
 #ifdef DEBUG
@@ -49,8 +45,7 @@
 #include <linux/proc_fs.h>
 #endif
 
-/* Pre-swapping comments:
- *
+/*
  * ++roman:
  *
  * New version of ST-Ram buffer allocation. Instead of using the
@@ -75,76 +70,6 @@
  *
  */
 
-/*
- * New Nov 1997: Use ST-RAM as swap space!
- *
- * In the past, there were often problems with modules that require ST-RAM
- * buffers. Such drivers have to use __get_dma_pages(), which unfortunately
- * often isn't very successful in allocating more than 1 page :-( [1] The net
- * result was that most of the time you couldn't insmod such modules (ataflop,
- * ACSI, SCSI on Falcon, Atari internal framebuffer, not to speak of acsi_slm,
- * which needs a 1 MB buffer... :-).
- *
- * To overcome this limitation, ST-RAM can now be turned into a very
- * high-speed swap space. If a request for an ST-RAM buffer comes, the kernel
- * now tries to unswap some pages on that swap device to make some free (and
- * contiguous) space. This works much better in comparison to
- * __get_dma_pages(), since used swap pages can be selectively freed by either
- * moving them to somewhere else in swap space, or by reading them back into
- * system memory. Ok, there operation of unswapping isn't really cheap (for
- * each page, one has to go through the page tables of all processes), but it
- * doesn't happen that often (only when allocation ST-RAM, i.e. when loading a
- * module that needs ST-RAM). But it at least makes it possible to load such
- * modules!
- *
- * It could also be that overall system performance increases a bit due to
- * ST-RAM swapping, since slow ST-RAM isn't used anymore for holding data or
- * executing code in. It's then just a (very fast, compared to disk) back
- * storage for not-so-often needed data. (But this effect must be compared
- * with the loss of total memory...) Don't know if the effect is already
- * visible on a TT, where the speed difference between ST- and TT-RAM isn't
- * that dramatic, but it should on machines where TT-RAM is really much faster
- * (e.g. Afterburner).
- *
- *   [1]: __get_free_pages() does a fine job if you only want one page, but if
- * you want more (contiguous) pages, it can give you such a block only if
- * there's already a free one. The algorithm can't try to free buffers or swap
- * out something in order to make more free space, since all that page-freeing
- * mechanisms work "target-less", i.e. they just free something, but not in a
- * specific place. I.e., __get_free_pages() can't do anything to free
- * *adjacent* pages :-( This situation becomes even worse for DMA memory,
- * since the freeing algorithms are also blind to DMA capability of pages.
- */
-
-/* 1998-10-20: ++andreas
-   unswap_by_move disabled because it does not handle swapped shm pages.
-*/
-
-/* 2000-05-01: ++andreas
-   Integrated with bootmem.  Remove all traces of unswap_by_move.
-*/
-
-#ifdef CONFIG_STRAM_SWAP
-#define ALIGN_IF_SWAP(x)	PAGE_ALIGN(x)
-#else
-#define ALIGN_IF_SWAP(x)	(x)
-#endif
-
-/* get index of swap page at address 'addr' */
-#define SWAP_NR(addr)		(((addr) - swap_start) >> PAGE_SHIFT)
-
-/* get address of swap page #'nr' */
-#define SWAP_ADDR(nr)		(swap_start + ((nr) << PAGE_SHIFT))
-
-/* get number of pages for 'n' bytes (already page-aligned) */
-#define N_PAGES(n)			((n) >> PAGE_SHIFT)
-
-/* The following two numbers define the maximum fraction of ST-RAM in total
- * memory, below that the kernel would automatically use ST-RAM as swap
- * space. This decision can be overridden with stram_swap= */
-#define MAX_STRAM_FRACTION_NOM		1
-#define MAX_STRAM_FRACTION_DENOM	3
-
 /* Start and end (virtual) of ST-RAM */
 static void *stram_start, *stram_end;
 
@@ -164,10 +89,9 @@ typedef struct stram_block {
 } BLOCK;
 
 /* values for flags field */
-#define BLOCK_FREE		0x01	/* free structure in the BLOCKs pool */
+#define BLOCK_FREE	0x01	/* free structure in the BLOCKs pool */
 #define BLOCK_KMALLOCED	0x02	/* structure allocated by kmalloc() */
-#define BLOCK_GFP		0x08	/* block allocated with __get_dma_pages() */
-#define BLOCK_INSWAP	0x10	/* block allocated in swap space */
+#define BLOCK_GFP	0x08	/* block allocated with __get_dma_pages() */
 
 /* list of allocated blocks */
 static BLOCK *alloc_list;
@@ -179,60 +103,8 @@ static BLOCK *alloc_list;
 #define N_STATIC_BLOCKS	20
 static BLOCK static_blocks[N_STATIC_BLOCKS];
 
-#ifdef CONFIG_STRAM_SWAP
-/* max. number of bytes to use for swapping
- *  0 = no ST-RAM swapping
- * -1 = do swapping (to whole ST-RAM) if it's less than MAX_STRAM_FRACTION of
- *      total memory
- */
-static int max_swap_size = -1;
-
-/* start and end of swapping area */
-static void *swap_start, *swap_end;
-
-/* The ST-RAM's swap info structure */
-static struct swap_info_struct *stram_swap_info;
-
-/* The ST-RAM's swap type */
-static int stram_swap_type;
-
-/* Semaphore for get_stram_region.  */
-static DECLARE_MUTEX(stram_swap_sem);
-
-/* major and minor device number of the ST-RAM device; for the major, we use
- * the same as Amiga z2ram, which is really similar and impossible on Atari,
- * and for the minor a relatively odd number to avoid the user creating and
- * using that device. */
-#define	STRAM_MAJOR		Z2RAM_MAJOR
-#define	STRAM_MINOR		13
-
-/* Some impossible pointer value */
-#define MAGIC_FILE_P	(struct file *)0xffffdead
-
-#ifdef DO_PROC
-static unsigned stat_swap_read;
-static unsigned stat_swap_write;
-static unsigned stat_swap_force;
-#endif /* DO_PROC */
-
-#endif /* CONFIG_STRAM_SWAP */
-
 /***************************** Prototypes *****************************/
 
-#ifdef CONFIG_STRAM_SWAP
-static int swap_init(void *start_mem, void *swap_data);
-static void *get_stram_region( unsigned long n_pages );
-static void free_stram_region( unsigned long offset, unsigned long n_pages
-			       );
-static int in_some_region(void *addr);
-static unsigned long find_free_region( unsigned long n_pages, unsigned long
-				       *total_free, unsigned long
-				       *region_free );
-static void do_stram_request(request_queue_t *);
-static int stram_open( struct inode *inode, struct file *filp );
-static int stram_release( struct inode *inode, struct file *filp );
-static void reserve_region(void *start, void *end);
-#endif
 static BLOCK *add_region( void *addr, unsigned long size );
 static BLOCK *find_region( void *addr );
 static int remove_region( BLOCK *block );
@@ -279,84 +151,11 @@ void __init atari_stram_init(void)
  */
 void __init atari_stram_reserve_pages(void *start_mem)
 {
-#ifdef CONFIG_STRAM_SWAP
-	/* if max_swap_size is negative (i.e. no stram_swap= option given),
-	 * determine at run time whether to use ST-RAM swapping */
-	if (max_swap_size < 0)
-		/* Use swapping if ST-RAM doesn't make up more than MAX_STRAM_FRACTION
-		 * of total memory. In that case, the max. size is set to 16 MB,
-		 * because ST-RAM can never be bigger than that.
-		 * Also, never use swapping on a Hades, there's no separate ST-RAM in
-		 * that machine. */
-		max_swap_size =
-			(!MACH_IS_HADES &&
-			 (N_PAGES(stram_end-stram_start)*MAX_STRAM_FRACTION_DENOM <=
-			  ((unsigned long)high_memory>>PAGE_SHIFT)*MAX_STRAM_FRACTION_NOM)) ? 16*1024*1024 : 0;
-	DPRINTK( "atari_stram_reserve_pages: max_swap_size = %d\n", max_swap_size );
-#endif
-
 	/* always reserve first page of ST-RAM, the first 2 kB are
 	 * supervisor-only! */
 	if (!kernel_in_stram)
 		reserve_bootmem (0, PAGE_SIZE);
 
-#ifdef CONFIG_STRAM_SWAP
-	{
-		void *swap_data;
-
-		start_mem = (void *) PAGE_ALIGN ((unsigned long) start_mem);
-		/* determine first page to use as swap: if the kernel is
-		   in TT-RAM, this is the first page of (usable) ST-RAM;
-		   otherwise just use the end of kernel data (= start_mem) */
-		swap_start = !kernel_in_stram ? stram_start + PAGE_SIZE : start_mem;
-		/* decrement by one page, rest of kernel assumes that first swap page
-		 * is always reserved and maybe doesn't handle swp_entry == 0
-		 * correctly */
-		swap_start -= PAGE_SIZE;
-		swap_end = stram_end;
-		if (swap_end-swap_start > max_swap_size)
-			swap_end =  swap_start + max_swap_size;
-		DPRINTK( "atari_stram_reserve_pages: swapping enabled; "
-				 "swap=%p-%p\n", swap_start, swap_end);
-
-		/* reserve some amount of memory for maintainance of
-		 * swapping itself: one page for each 2048 (PAGE_SIZE/2)
-		 * swap pages. (2 bytes for each page) */
-		swap_data = start_mem;
-		start_mem += ((SWAP_NR(swap_end) + PAGE_SIZE/2 - 1)
-			      >> (PAGE_SHIFT-1)) << PAGE_SHIFT;
-		/* correct swap_start if necessary */
-		if (swap_start + PAGE_SIZE == swap_data)
-			swap_start = start_mem - PAGE_SIZE;
-
-		if (!swap_init( start_mem, swap_data )) {
-			printk( KERN_ERR "ST-RAM swap space initialization failed\n" );
-			max_swap_size = 0;
-			return;
-		}
-		/* reserve region for swapping meta-data */
-		reserve_region(swap_data, start_mem);
-		/* reserve swapping area itself */
-		reserve_region(swap_start + PAGE_SIZE, swap_end);
-
-		/*
-		 * If the whole ST-RAM is used for swapping, there are no allocatable
-		 * dma pages left. But unfortunately, some shared parts of the kernel
-		 * (particularly the SCSI mid-level) call __get_dma_pages()
-		 * unconditionally :-( These calls then fail, and scsi.c even doesn't
-		 * check for NULL return values and just crashes. The quick fix for
-		 * this (instead of doing much clean up work in the SCSI code) is to
-		 * pretend all pages are DMA-able by setting mach_max_dma_address to
-		 * ULONG_MAX. This doesn't change any functionality so far, since
-		 * get_dma_pages() shouldn't be used on Atari anyway anymore (better
-		 * use atari_stram_alloc()), and the Atari SCSI drivers don't need DMA
-		 * memory. But unfortunately there's now no kind of warning (even not
-		 * a NULL return value) if you use get_dma_pages() nevertheless :-(
-		 * You just will get non-DMA-able memory...
-		 */
-		mach_max_dma_address = 0xffffffff;
-	}
-#endif
 }
 
 void atari_stram_mem_init_hook (void)
@@ -367,7 +166,6 @@ void atari_stram_mem_init_hook (void)
 
 /*
  * This is main public interface: somehow allocate a ST-RAM block
- * There are three strategies:
  *
  *  - If we're before mem_init(), we have to make a static allocation. The
  *    region is taken in the kernel data area (if the kernel is in ST-RAM) or
@@ -375,14 +173,9 @@ void atari_stram_mem_init_hook (void)
  *    rsvd_stram_* region. The ST-RAM is somewhere in the middle of kernel
  *    address space in the latter case.
  *
- *  - If mem_init() already has been called and ST-RAM swapping is enabled,
- *    try to get the memory from the (pseudo) swap-space, either free already
- *    or by moving some other pages out of the swap.
- *
- *  - If mem_init() already has been called, and ST-RAM swapping is not
- *    enabled, the only possibility is to try with __get_dma_pages(). This has
- *    the disadvantage that it's very hard to get more than 1 page, and it is
- *    likely to fail :-(
+ *  - If mem_init() already has been called, try with __get_dma_pages().
+ *    This has the disadvantage that it's very hard to get more than 1 page,
+ *    and it is likely to fail :-(
  *
  */
 void *atari_stram_alloc(long size, const char *owner)
@@ -393,27 +186,13 @@ void *atari_stram_alloc(long size, const char *owner)
 
 	DPRINTK("atari_stram_alloc(size=%08lx,owner=%s)\n", size, owner);
 
-	size = ALIGN_IF_SWAP(size);
-	DPRINTK( "atari_stram_alloc: rounded size = %08lx\n", size );
-#ifdef CONFIG_STRAM_SWAP
-	if (max_swap_size) {
-		/* If swapping is active: make some free space in the swap
-		   "device". */
-		DPRINTK( "atari_stram_alloc: after mem_init, swapping ok, "
-				 "calling get_region\n" );
-		addr = get_stram_region( N_PAGES(size) );
-		flags = BLOCK_INSWAP;
-	}
-	else
-#endif
 	if (!mem_init_done)
 		return alloc_bootmem_low(size);
 	else {
-		/* After mem_init() and no swapping: can only resort to
-		 * __get_dma_pages() */
+		/* After mem_init(): can only resort to __get_dma_pages() */
 		addr = (void *)__get_dma_pages(GFP_KERNEL, get_order(size));
 		flags = BLOCK_GFP;
-		DPRINTK( "atari_stram_alloc: after mem_init, swapping off, "
+		DPRINTK( "atari_stram_alloc: after mem_init, "
 				 "get_pages=%p\n", addr );
 	}
 
@@ -422,12 +201,7 @@ void *atari_stram_alloc(long size, const char *owner)
 			/* out of memory for BLOCK structure :-( */
 			DPRINTK( "atari_stram_alloc: out of mem for BLOCK -- "
 					 "freeing again\n" );
-#ifdef CONFIG_STRAM_SWAP
-			if (flags == BLOCK_INSWAP)
-				free_stram_region( SWAP_NR(addr), N_PAGES(size) );
-			else
-#endif
-				free_pages((unsigned long)addr, get_order(size));
+			free_pages((unsigned long)addr, get_order(size));
 			return( NULL );
 		}
 		block->owner = owner;
@@ -451,25 +225,12 @@ void atari_stram_free( void *addr )
 	DPRINTK( "atari_stram_free: found block (%p): size=%08lx, owner=%s, "
 			 "flags=%02x\n", block, block->size, block->owner, block->flags );
 
-#ifdef CONFIG_STRAM_SWAP
-	if (!max_swap_size) {
-#endif
-		if (block->flags & BLOCK_GFP) {
-			DPRINTK("atari_stram_free: is kmalloced, order_size=%d\n",
-				get_order(block->size));
-			free_pages((unsigned long)addr, get_order(block->size));
-		}
-		else
-			goto fail;
-#ifdef CONFIG_STRAM_SWAP
-	}
-	else if (block->flags & BLOCK_INSWAP) {
-		DPRINTK( "atari_stram_free: is swap-alloced\n" );
-		free_stram_region( SWAP_NR(block->start), N_PAGES(block->size) );
-	}
-	else
+	if (!(block->flags & BLOCK_GFP))
 		goto fail;
-#endif
+
+	DPRINTK("atari_stram_free: is kmalloced, order_size=%d\n",
+		get_order(block->size));
+	free_pages((unsigned long)addr, get_order(block->size));
 	remove_region( block );
 	return;
 
@@ -478,612 +239,6 @@ void atari_stram_free( void *addr )
 			"(called from %p)\n", addr, __builtin_return_address(0) );
 }
 
-
-#ifdef CONFIG_STRAM_SWAP
-
-
-/* ------------------------------------------------------------------------ */
-/*						   Main Swapping Functions							*/
-/* ------------------------------------------------------------------------ */
-
-
-/*
- * Initialize ST-RAM swap device
- * (lots copied and modified from sys_swapon() in mm/swapfile.c)
- */
-static int __init swap_init(void *start_mem, void *swap_data)
-{
-	static struct dentry fake_dentry;
-	static struct vfsmount fake_vfsmnt;
-	struct swap_info_struct *p;
-	struct inode swap_inode;
-	unsigned int type;
-	void *addr;
-	int i, j, k, prev;
-
-	DPRINTK("swap_init(start_mem=%p, swap_data=%p)\n",
-		start_mem, swap_data);
-
-	/* need at least one page for swapping to (and this also isn't very
-	 * much... :-) */
-	if (swap_end - swap_start < 2*PAGE_SIZE) {
-		printk( KERN_WARNING "stram_swap_init: swap space too small\n" );
-		return( 0 );
-	}
-
-	/* find free slot in swap_info */
-	for( p = swap_info, type = 0; type < nr_swapfiles; type++, p++ )
-		if (!(p->flags & SWP_USED))
-			break;
-	if (type >= MAX_SWAPFILES) {
-		printk( KERN_WARNING "stram_swap_init: max. number of "
-				"swap devices exhausted\n" );
-		return( 0 );
-	}
-	if (type >= nr_swapfiles)
-		nr_swapfiles = type+1;
-
-	stram_swap_info = p;
-	stram_swap_type = type;
-
-	/* fake some dir cache entries to give us some name in /dev/swaps */
-	fake_dentry.d_parent = &fake_dentry;
-	fake_dentry.d_name.name = "stram (internal)";
-	fake_dentry.d_name.len = 16;
-	fake_vfsmnt.mnt_parent = &fake_vfsmnt;
-
-	p->flags        = SWP_USED;
-	p->swap_file    = &fake_dentry;
-	p->swap_vfsmnt  = &fake_vfsmnt;
-	p->swap_map	= swap_data;
-	p->cluster_nr   = 0;
-	p->next         = -1;
-	p->prio         = 0x7ff0;	/* a rather high priority, but not the higest
-								 * to give the user a chance to override */
-
-	/* call stram_open() directly, avoids at least the overhead in
-	 * constructing a dummy file structure... */
-	swap_inode.i_rdev = MKDEV( STRAM_MAJOR, STRAM_MINOR );
-	stram_open( &swap_inode, MAGIC_FILE_P );
-	p->max = SWAP_NR(swap_end);
-
-	/* initialize swap_map: set regions that are already allocated or belong
-	 * to kernel data space to SWAP_MAP_BAD, otherwise to free */
-	j = 0; /* # of free pages */
-	k = 0; /* # of already allocated pages (from pre-mem_init stram_alloc()) */
-	p->lowest_bit = 0;
-	p->highest_bit = 0;
-	for( i = 1, addr = SWAP_ADDR(1); i < p->max;
-		 i++, addr += PAGE_SIZE ) {
-		if (in_some_region( addr )) {
-			p->swap_map[i] = SWAP_MAP_BAD;
-			++k;
-		}
-		else if (kernel_in_stram && addr < start_mem ) {
-			p->swap_map[i] = SWAP_MAP_BAD;
-		}
-		else {
-			p->swap_map[i] = 0;
-			++j;
-			if (!p->lowest_bit) p->lowest_bit = i;
-			p->highest_bit = i;
-		}
-	}
-	/* first page always reserved (and doesn't really belong to swap space) */
-	p->swap_map[0] = SWAP_MAP_BAD;
-
-	/* now swapping to this device ok */
-	p->pages = j + k;
-	swap_list_lock();
-	nr_swap_pages += j;
-	p->flags = SWP_WRITEOK;
-
-	/* insert swap space into swap_list */
-	prev = -1;
-	for (i = swap_list.head; i >= 0; i = swap_info[i].next) {
-		if (p->prio >= swap_info[i].prio) {
-			break;
-		}
-		prev = i;
-	}
-	p->next = i;
-	if (prev < 0) {
-		swap_list.head = swap_list.next = p - swap_info;
-	} else {
-		swap_info[prev].next = p - swap_info;
-	}
-	swap_list_unlock();
-
-	printk( KERN_INFO "Using %dk (%d pages) of ST-RAM as swap space.\n",
-			p->pages << 2, p->pages );
-	return( 1 );
-}
-
-
-/*
- * The swap entry has been read in advance, and we return 1 to indicate
- * that the page has been used or is no longer needed.
- *
- * Always set the resulting pte to be nowrite (the same as COW pages
- * after one process has exited).  We don't know just how many PTEs will
- * share this swap entry, so be cautious and let do_wp_page work out
- * what to do if a write is requested later.
- */
-static inline void unswap_pte(struct vm_area_struct * vma, unsigned long
-			      address, pte_t *dir, swp_entry_t entry,
-			      struct page *page)
-{
-	pte_t pte = *dir;
-
-	if (pte_none(pte))
-		return;
-	if (pte_present(pte)) {
-		/* If this entry is swap-cached, then page must already
-                   hold the right address for any copies in physical
-                   memory */
-		if (pte_page(pte) != page)
-			return;
-		/* We will be removing the swap cache in a moment, so... */
-		set_pte(dir, pte_mkdirty(pte));
-		return;
-	}
-	if (pte_val(pte) != entry.val)
-		return;
-
-	DPRINTK("unswap_pte: replacing entry %08lx by new page %p",
-		entry.val, page);
-	set_pte(dir, pte_mkdirty(mk_pte(page, vma->vm_page_prot)));
-	swap_free(entry);
-	get_page(page);
-	inc_mm_counter(vma->vm_mm, rss);
-}
-
-static inline void unswap_pmd(struct vm_area_struct * vma, pmd_t *dir,
-			      unsigned long address, unsigned long size,
-			      unsigned long offset, swp_entry_t entry,
-			      struct page *page)
-{
-	pte_t * pte;
-	unsigned long end;
-
-	if (pmd_none(*dir))
-		return;
-	if (pmd_bad(*dir)) {
-		pmd_ERROR(*dir);
-		pmd_clear(dir);
-		return;
-	}
-	pte = pte_offset_kernel(dir, address);
-	offset += address & PMD_MASK;
-	address &= ~PMD_MASK;
-	end = address + size;
-	if (end > PMD_SIZE)
-		end = PMD_SIZE;
-	do {
-		unswap_pte(vma, offset+address-vma->vm_start, pte, entry, page);
-		address += PAGE_SIZE;
-		pte++;
-	} while (address < end);
-}
-
-static inline void unswap_pgd(struct vm_area_struct * vma, pgd_t *dir,
-			      unsigned long address, unsigned long size,
-			      swp_entry_t entry, struct page *page)
-{
-	pmd_t * pmd;
-	unsigned long offset, end;
-
-	if (pgd_none(*dir))
-		return;
-	if (pgd_bad(*dir)) {
-		pgd_ERROR(*dir);
-		pgd_clear(dir);
-		return;
-	}
-	pmd = pmd_offset(dir, address);
-	offset = address & PGDIR_MASK;
-	address &= ~PGDIR_MASK;
-	end = address + size;
-	if (end > PGDIR_SIZE)
-		end = PGDIR_SIZE;
-	do {
-		unswap_pmd(vma, pmd, address, end - address, offset, entry,
-			   page);
-		address = (address + PMD_SIZE) & PMD_MASK;
-		pmd++;
-	} while (address < end);
-}
-
-static void unswap_vma(struct vm_area_struct * vma, pgd_t *pgdir,
-		       swp_entry_t entry, struct page *page)
-{
-	unsigned long start = vma->vm_start, end = vma->vm_end;
-
-	do {
-		unswap_pgd(vma, pgdir, start, end - start, entry, page);
-		start = (start + PGDIR_SIZE) & PGDIR_MASK;
-		pgdir++;
-	} while (start < end);
-}
-
-static void unswap_process(struct mm_struct * mm, swp_entry_t entry,
-			   struct page *page)
-{
-	struct vm_area_struct* vma;
-
-	/*
-	 * Go through process' page directory.
-	 */
-	if (!mm)
-		return;
-	for (vma = mm->mmap; vma; vma = vma->vm_next) {
-		pgd_t * pgd = pgd_offset(mm, vma->vm_start);
-		unswap_vma(vma, pgd, entry, page);
-	}
-}
-
-
-static int unswap_by_read(unsigned short *map, unsigned long max,
-			  unsigned long start, unsigned long n_pages)
-{
-	struct task_struct *p;
-	struct page *page;
-	swp_entry_t entry;
-	unsigned long i;
-
-	DPRINTK( "unswapping %lu..%lu by reading in\n",
-			 start, start+n_pages-1 );
-
-	for( i = start; i < start+n_pages; ++i ) {
-		if (map[i] == SWAP_MAP_BAD) {
-			printk( KERN_ERR "get_stram_region: page %lu already "
-					"reserved??\n", i );
-			continue;
-		}
-
-		if (map[i]) {
-			entry = swp_entry(stram_swap_type, i);
-			DPRINTK("unswap: map[i=%lu]=%u nr_swap=%ld\n",
-				i, map[i], nr_swap_pages);
-
-			swap_device_lock(stram_swap_info);
-			map[i]++;
-			swap_device_unlock(stram_swap_info);
-			/* Get a page for the entry, using the existing
-			   swap cache page if there is one.  Otherwise,
-			   get a clean page and read the swap into it. */
-			page = read_swap_cache_async(entry, NULL, 0);
-			if (!page) {
-				swap_free(entry);
-				return -ENOMEM;
-			}
-			read_lock(&tasklist_lock);
-			for_each_process(p)
-				unswap_process(p->mm, entry, page);
-			read_unlock(&tasklist_lock);
-			shmem_unuse(entry, page);
-			/* Now get rid of the extra reference to the
-			   temporary page we've been using. */
-			if (PageSwapCache(page))
-				delete_from_swap_cache(page);
-			__free_page(page);
-	#ifdef DO_PROC
-			stat_swap_force++;
-	#endif
-		}
-
-		DPRINTK( "unswap: map[i=%lu]=%u nr_swap=%ld\n",
-				 i, map[i], nr_swap_pages );
-		swap_list_lock();
-		swap_device_lock(stram_swap_info);
-		map[i] = SWAP_MAP_BAD;
-		if (stram_swap_info->lowest_bit == i)
-			stram_swap_info->lowest_bit++;
-		if (stram_swap_info->highest_bit == i)
-			stram_swap_info->highest_bit--;
-		--nr_swap_pages;
-		swap_device_unlock(stram_swap_info);
-		swap_list_unlock();
-	}
-
-	return 0;
-}
-
-/*
- * reserve a region in ST-RAM swap space for an allocation
- */
-static void *get_stram_region( unsigned long n_pages )
-{
-	unsigned short *map = stram_swap_info->swap_map;
-	unsigned long max = stram_swap_info->max;
-	unsigned long start, total_free, region_free;
-	int err;
-	void *ret = NULL;
-
-	DPRINTK( "get_stram_region(n_pages=%lu)\n", n_pages );
-
-	down(&stram_swap_sem);
-
-	/* disallow writing to the swap device now */
-	stram_swap_info->flags = SWP_USED;
-
-	/* find a region of n_pages pages in the swap space including as much free
-	 * pages as possible (and excluding any already-reserved pages). */
-	if (!(start = find_free_region( n_pages, &total_free, &region_free )))
-		goto end;
-	DPRINTK( "get_stram_region: region starts at %lu, has %lu free pages\n",
-			 start, region_free );
-
-	err = unswap_by_read(map, max, start, n_pages);
-	if (err)
-		goto end;
-
-	ret = SWAP_ADDR(start);
-  end:
-	/* allow using swap device again */
-	stram_swap_info->flags = SWP_WRITEOK;
-	up(&stram_swap_sem);
-	DPRINTK( "get_stram_region: returning %p\n", ret );
-	return( ret );
-}
-
-
-/*
- * free a reserved region in ST-RAM swap space
- */
-static void free_stram_region( unsigned long offset, unsigned long n_pages )
-{
-	unsigned short *map = stram_swap_info->swap_map;
-
-	DPRINTK( "free_stram_region(offset=%lu,n_pages=%lu)\n", offset, n_pages );
-
-	if (offset < 1 || offset + n_pages > stram_swap_info->max) {
-		printk( KERN_ERR "free_stram_region: Trying to free non-ST-RAM\n" );
-		return;
-	}
-
-	swap_list_lock();
-	swap_device_lock(stram_swap_info);
-	/* un-reserve the freed pages */
-	for( ; n_pages > 0; ++offset, --n_pages ) {
-		if (map[offset] != SWAP_MAP_BAD)
-			printk( KERN_ERR "free_stram_region: Swap page %lu was not "
-					"reserved\n", offset );
-		map[offset] = 0;
-	}
-
-	/* update swapping meta-data */
-	if (offset < stram_swap_info->lowest_bit)
-		stram_swap_info->lowest_bit = offset;
-	if (offset+n_pages-1 > stram_swap_info->highest_bit)
-		stram_swap_info->highest_bit = offset+n_pages-1;
-	if (stram_swap_info->prio > swap_info[swap_list.next].prio)
-		swap_list.next = swap_list.head;
-	nr_swap_pages += n_pages;
-	swap_device_unlock(stram_swap_info);
-	swap_list_unlock();
-}
-
-
-/* ------------------------------------------------------------------------ */
-/*						Utility Functions for Swapping						*/
-/* ------------------------------------------------------------------------ */
-
-
-/* is addr in some of the allocated regions? */
-static int in_some_region(void *addr)
-{
-	BLOCK *p;
-
-	for( p = alloc_list; p; p = p->next ) {
-		if (p->start <= addr && addr < p->start + p->size)
-			return( 1 );
-	}
-	return( 0 );
-}
-
-
-static unsigned long find_free_region(unsigned long n_pages,
-				      unsigned long *total_free,
-				      unsigned long *region_free)
-{
-	unsigned short *map = stram_swap_info->swap_map;
-	unsigned long max = stram_swap_info->max;
-	unsigned long head, tail, max_start;
-	long nfree, max_free;
-
-	/* first scan the swap space for a suitable place for the allocation */
-	head = 1;
-	max_start = 0;
-	max_free = -1;
-	*total_free = 0;
-
-  start_over:
-	/* increment tail until final window size reached, and count free pages */
-	nfree = 0;
-	for( tail = head; tail-head < n_pages && tail < max; ++tail ) {
-		if (map[tail] == SWAP_MAP_BAD) {
-			head = tail+1;
-			goto start_over;
-		}
-		if (!map[tail]) {
-			++nfree;
-			++*total_free;
-		}
-	}
-	if (tail-head < n_pages)
-		goto out;
-	if (nfree > max_free) {
-		max_start = head;
-		max_free  = nfree;
-		if (max_free >= n_pages)
-			/* don't need more free pages... :-) */
-			goto out;
-	}
-
-	/* now shift the window and look for the area where as much pages as
-	 * possible are free */
-	while( tail < max ) {
-		nfree -= (map[head++] == 0);
-		if (map[tail] == SWAP_MAP_BAD) {
-			head = tail+1;
-			goto start_over;
-		}
-		if (!map[tail]) {
-			++nfree;
-			++*total_free;
-		}
-		++tail;
-		if (nfree > max_free) {
-			max_start = head;
-			max_free  = nfree;
-			if (max_free >= n_pages)
-				/* don't need more free pages... :-) */
-				goto out;
-		}
-	}
-
-  out:
-	if (max_free < 0) {
-		printk( KERN_NOTICE "get_stram_region: ST-RAM too full or fragmented "
-				"-- can't allocate %lu pages\n", n_pages );
-		return( 0 );
-	}
-
-	*region_free = max_free;
-	return( max_start );
-}
-
-
-/* setup parameters from command line */
-void __init stram_swap_setup(char *str, int *ints)
-{
-	if (ints[0] >= 1)
-		max_swap_size = ((ints[1] < 0 ? 0 : ints[1]) * 1024) & PAGE_MASK;
-}
-
-
-/* ------------------------------------------------------------------------ */
-/*								ST-RAM device								*/
-/* ------------------------------------------------------------------------ */
-
-static int refcnt;
-
-static void do_stram_request(request_queue_t *q)
-{
-	struct request *req;
-
-	while ((req = elv_next_request(q)) != NULL) {
-		void *start = swap_start + (req->sector << 9);
-		unsigned long len = req->current_nr_sectors << 9;
-		if ((start + len) > swap_end) {
-			printk( KERN_ERR "stram: bad access beyond end of device: "
-					"block=%ld, count=%d\n",
-					req->sector,
-					req->current_nr_sectors );
-			end_request(req, 0);
-			continue;
-		}
-
-		if (req->cmd == READ) {
-			memcpy(req->buffer, start, len);
-#ifdef DO_PROC
-			stat_swap_read += N_PAGES(len);
-#endif
-		}
-		else {
-			memcpy(start, req->buffer, len);
-#ifdef DO_PROC
-			stat_swap_write += N_PAGES(len);
-#endif
-		}
-		end_request(req, 1);
-	}
-}
-
-
-static int stram_open( struct inode *inode, struct file *filp )
-{
-	if (filp != MAGIC_FILE_P) {
-		printk( KERN_NOTICE "Only kernel can open ST-RAM device\n" );
-		return( -EPERM );
-	}
-	if (refcnt)
-		return( -EBUSY );
-	++refcnt;
-	return( 0 );
-}
-
-static int stram_release( struct inode *inode, struct file *filp )
-{
-	if (filp != MAGIC_FILE_P) {
-		printk( KERN_NOTICE "Only kernel can close ST-RAM device\n" );
-		return( -EPERM );
-	}
-	if (refcnt > 0)
-		--refcnt;
-	return( 0 );
-}
-
-
-static struct block_device_operations stram_fops = {
-	.open =		stram_open,
-	.release =	stram_release,
-};
-
-static struct gendisk *stram_disk;
-static struct request_queue *stram_queue;
-static DEFINE_SPINLOCK(stram_lock);
-
-int __init stram_device_init(void)
-{
-	if (!MACH_IS_ATARI)
-		/* no point in initializing this, I hope */
-		return -ENXIO;
-
-	if (!max_swap_size)
-		/* swapping not enabled */
-		return -ENXIO;
-	stram_disk = alloc_disk(1);
-	if (!stram_disk)
-		return -ENOMEM;
-
-	if (register_blkdev(STRAM_MAJOR, "stram")) {
-		put_disk(stram_disk);
-		return -ENXIO;
-	}
-
-	stram_queue = blk_init_queue(do_stram_request, &stram_lock);
-	if (!stram_queue) {
-		unregister_blkdev(STRAM_MAJOR, "stram");
-		put_disk(stram_disk);
-		return -ENOMEM;
-	}
-
-	stram_disk->major = STRAM_MAJOR;
-	stram_disk->first_minor = STRAM_MINOR;
-	stram_disk->fops = &stram_fops;
-	stram_disk->queue = stram_queue;
-	sprintf(stram_disk->disk_name, "stram");
-	set_capacity(stram_disk, (swap_end - swap_start)/512);
-	add_disk(stram_disk);
-	return 0;
-}
-
-
-
-/* ------------------------------------------------------------------------ */
-/*							Misc Utility Functions							*/
-/* ------------------------------------------------------------------------ */
-
-/* reserve a range of pages */
-static void reserve_region(void *start, void *end)
-{
-	reserve_bootmem (virt_to_phys(start), end - start);
-}
-
-#endif /* CONFIG_STRAM_SWAP */
-
 
 /* ------------------------------------------------------------------------ */
 /*							  Region Management								*/
@@ -1173,50 +328,9 @@ int get_stram_list( char *buf )
 {
 	int len = 0;
 	BLOCK *p;
-#ifdef CONFIG_STRAM_SWAP
-	int i;
-	unsigned short *map = stram_swap_info->swap_map;
-	unsigned long max = stram_swap_info->max;
-	unsigned free = 0, used = 0, rsvd = 0;
-#endif
 
-#ifdef CONFIG_STRAM_SWAP
-	if (max_swap_size) {
-		for( i = 1; i < max; ++i ) {
-			if (!map[i])
-				++free;
-			else if (map[i] == SWAP_MAP_BAD)
-				++rsvd;
-			else
-				++used;
-		}
-		PRINT_PROC(
-			"Total ST-RAM:      %8u kB\n"
-			"Total ST-RAM swap: %8lu kB\n"
-			"Free swap:         %8u kB\n"
-			"Used swap:         %8u kB\n"
-			"Allocated swap:    %8u kB\n"
-			"Swap Reads:        %8u\n"
-			"Swap Writes:       %8u\n"
-			"Swap Forced Reads: %8u\n",
-			(stram_end - stram_start) >> 10,
-			(max-1) << (PAGE_SHIFT-10),
-			free << (PAGE_SHIFT-10),
-			used << (PAGE_SHIFT-10),
-			rsvd << (PAGE_SHIFT-10),
-			stat_swap_read,
-			stat_swap_write,
-			stat_swap_force );
-	}
-	else {
-#endif
-		PRINT_PROC( "ST-RAM swapping disabled\n" );
-		PRINT_PROC("Total ST-RAM:      %8u kB\n",
+	PRINT_PROC("Total ST-RAM:      %8u kB\n",
 			   (stram_end - stram_start) >> 10);
-#ifdef CONFIG_STRAM_SWAP
-	}
-#endif
-
 	PRINT_PROC( "Allocated regions:\n" );
 	for( p = alloc_list; p; p = p->next ) {
 		if (len + 50 >= PAGE_SIZE)
@@ -1227,8 +341,6 @@ int get_stram_list( char *buf )
 			   p->owner);
 		if (p->flags & BLOCK_GFP)
 			PRINT_PROC( "page-alloced)\n" );
-		else if (p->flags & BLOCK_INSWAP)
-			PRINT_PROC( "in swap)\n" );
 		else
 			PRINT_PROC( "??)\n" );
 	}
diff --git a/arch/m68k/atari/time.c b/arch/m68k/atari/time.c
index 6df7fb60dfea..e79bbc94216d 100644
--- a/arch/m68k/atari/time.c
+++ b/arch/m68k/atari/time.c
@@ -212,10 +212,8 @@ int atari_tt_hwclk( int op, struct rtc_time *t )
      * additionally the RTC_SET bit is set to prevent an update cycle.
      */
 
-    while( RTC_READ(RTC_FREQ_SELECT) & RTC_UIP ) {
-        current->state = TASK_INTERRUPTIBLE;
-        schedule_timeout(HWCLK_POLL_INTERVAL);
-    }
+    while( RTC_READ(RTC_FREQ_SELECT) & RTC_UIP )
+        schedule_timeout_interruptible(HWCLK_POLL_INTERVAL);
 
     local_irq_save(flags);
     RTC_WRITE( RTC_CONTROL, ctrl | RTC_SET );
diff --git a/arch/m68k/fpsp040/skeleton.S b/arch/m68k/fpsp040/skeleton.S
index 9571a21d6ad4..a1629194e3fd 100644
--- a/arch/m68k/fpsp040/skeleton.S
+++ b/arch/m68k/fpsp040/skeleton.S
@@ -381,10 +381,8 @@ fpsp_done:
 .Lnotkern:
 	SAVE_ALL_INT
 	GET_CURRENT(%d0)
-	tstb	%curptr@(TASK_NEEDRESCHED)
-	jne	ret_from_exception	| deliver signals,
-					| reschedule etc..
-	RESTORE_ALL
+	| deliver signals, reschedule etc..
+	jra	ret_from_exception
 
 |
 |	mem_write --- write to user or supervisor address space
diff --git a/arch/m68k/ifpsp060/iskeleton.S b/arch/m68k/ifpsp060/iskeleton.S
index 4ba2c74da93d..b2dbdf5ee309 100644
--- a/arch/m68k/ifpsp060/iskeleton.S
+++ b/arch/m68k/ifpsp060/iskeleton.S
@@ -75,10 +75,8 @@ _060_isp_done:
 .Lnotkern:
 	SAVE_ALL_INT
 	GET_CURRENT(%d0)
-	tstb	%curptr@(TASK_NEEDRESCHED)
-	jne	ret_from_exception	| deliver signals,
-					| reschedule etc..
-	RESTORE_ALL
+	| deliver signals, reschedule etc..
+	jra	ret_from_exception
 
 |
 | _060_real_chk():
diff --git a/arch/m68k/kernel/asm-offsets.c b/arch/m68k/kernel/asm-offsets.c
index cee3317b8665..c787c5ba9513 100644
--- a/arch/m68k/kernel/asm-offsets.c
+++ b/arch/m68k/kernel/asm-offsets.c
@@ -25,12 +25,8 @@ int main(void)
 	DEFINE(TASK_STATE, offsetof(struct task_struct, state));
 	DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags));
 	DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace));
-	DEFINE(TASK_WORK, offsetof(struct task_struct, thread.work));
-	DEFINE(TASK_NEEDRESCHED, offsetof(struct task_struct, thread.work.need_resched));
-	DEFINE(TASK_SYSCALL_TRACE, offsetof(struct task_struct, thread.work.syscall_trace));
-	DEFINE(TASK_SIGPENDING, offsetof(struct task_struct, thread.work.sigpending));
-	DEFINE(TASK_NOTIFY_RESUME, offsetof(struct task_struct, thread.work.notify_resume));
 	DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
+	DEFINE(TASK_INFO, offsetof(struct task_struct, thread.info));
 	DEFINE(TASK_MM, offsetof(struct task_struct, mm));
 	DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
 
@@ -45,6 +41,10 @@ int main(void)
 	DEFINE(THREAD_FPCNTL, offsetof(struct thread_struct, fpcntl));
 	DEFINE(THREAD_FPSTATE, offsetof(struct thread_struct, fpstate));
 
+	/* offsets into the thread_info struct */
+	DEFINE(TINFO_PREEMPT, offsetof(struct thread_info, preempt_count));
+	DEFINE(TINFO_FLAGS, offsetof(struct thread_info, flags));
+
 	/* offsets into the pt_regs */
 	DEFINE(PT_D0, offsetof(struct pt_regs, d0));
 	DEFINE(PT_ORIG_D0, offsetof(struct pt_regs, orig_d0));
diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S
index 23ca60a45552..320fde05dc63 100644
--- a/arch/m68k/kernel/entry.S
+++ b/arch/m68k/kernel/entry.S
@@ -44,9 +44,7 @@
 
 #include <asm/asm-offsets.h>
 
-.globl system_call, buserr, trap
-.globl resume, ret_from_exception
-.globl ret_from_signal
+.globl system_call, buserr, trap, resume
 .globl inthandler, sys_call_table
 .globl sys_fork, sys_clone, sys_vfork
 .globl ret_from_interrupt, bad_interrupt
@@ -58,7 +56,7 @@ ENTRY(buserr)
 	movel	%sp,%sp@-		| stack frame pointer argument
 	bsrl	buserr_c
 	addql	#4,%sp
-	jra	ret_from_exception
+	jra	.Lret_from_exception
 
 ENTRY(trap)
 	SAVE_ALL_INT
@@ -66,7 +64,7 @@ ENTRY(trap)
 	movel	%sp,%sp@-		| stack frame pointer argument
 	bsrl	trap_c
 	addql	#4,%sp
-	jra	ret_from_exception
+	jra	.Lret_from_exception
 
 	| After a fork we jump here directly from resume,
 	| so that %d1 contains the previous task
@@ -75,30 +73,31 @@ ENTRY(ret_from_fork)
 	movel	%d1,%sp@-
 	jsr	schedule_tail
 	addql	#4,%sp
-	jra	ret_from_exception
+	jra	.Lret_from_exception
 
-badsys:
-	movel	#-ENOSYS,%sp@(PT_D0)
-	jra	ret_from_exception
-
-do_trace:
+do_trace_entry:
 	movel	#-ENOSYS,%sp@(PT_D0)	| needed for strace
 	subql	#4,%sp
 	SAVE_SWITCH_STACK
 	jbsr	syscall_trace
 	RESTORE_SWITCH_STACK
 	addql	#4,%sp
-	movel	%sp@(PT_ORIG_D0),%d1
-	movel	#-ENOSYS,%d0
-	cmpl	#NR_syscalls,%d1
-	jcc	1f
-	jbsr	@(sys_call_table,%d1:l:4)@(0)
-1:	movel	%d0,%sp@(PT_D0)		| save the return value
-	subql	#4,%sp			| dummy return address
+	movel	%sp@(PT_ORIG_D0),%d0
+	cmpl	#NR_syscalls,%d0
+	jcs	syscall
+badsys:
+	movel	#-ENOSYS,%sp@(PT_D0)
+	jra	ret_from_syscall
+
+do_trace_exit:
+	subql	#4,%sp
 	SAVE_SWITCH_STACK
 	jbsr	syscall_trace
+	RESTORE_SWITCH_STACK
+	addql	#4,%sp
+	jra	.Lret_from_exception
 
-ret_from_signal:
+ENTRY(ret_from_signal)
 	RESTORE_SWITCH_STACK
 	addql	#4,%sp
 /* on 68040 complete pending writebacks if any */
@@ -111,7 +110,7 @@ ret_from_signal:
 	addql	#4,%sp
 1:
 #endif
-	jra	ret_from_exception
+	jra	.Lret_from_exception
 
 ENTRY(system_call)
 	SAVE_ALL_SYS
@@ -120,30 +119,34 @@ ENTRY(system_call)
 	| save top of frame
 	movel	%sp,%curptr@(TASK_THREAD+THREAD_ESP0)
 
-	tstb	%curptr@(TASK_SYSCALL_TRACE)
-	jne	do_trace
+	| syscall trace?
+	tstb	%curptr@(TASK_INFO+TINFO_FLAGS+2)
+	jmi	do_trace_entry
 	cmpl	#NR_syscalls,%d0
 	jcc	badsys
+syscall:
 	jbsr	@(sys_call_table,%d0:l:4)@(0)
 	movel	%d0,%sp@(PT_D0)		| save the return value
-
+ret_from_syscall:
 	|oriw	#0x0700,%sr
-	movel	%curptr@(TASK_WORK),%d0
+	movew	%curptr@(TASK_INFO+TINFO_FLAGS+2),%d0
 	jne	syscall_exit_work
 1:	RESTORE_ALL
 
 syscall_exit_work:
 	btst	#5,%sp@(PT_SR)		| check if returning to kernel
 	bnes	1b			| if so, skip resched, signals
-	tstw	%d0
-	jeq	do_signal_return
-	tstb	%d0
-	jne	do_delayed_trace
-
+	lslw	#1,%d0
+	jcs	do_trace_exit
+	jmi	do_delayed_trace
+	lslw	#8,%d0
+	jmi	do_signal_return
 	pea	resume_userspace
-	jmp	schedule
+	jra	schedule
+
 
-ret_from_exception:
+ENTRY(ret_from_exception)
+.Lret_from_exception:
 	btst	#5,%sp@(PT_SR)		| check if returning to kernel
 	bnes	1f			| if so, skip resched, signals
 	| only allow interrupts when we are really the last one on the
@@ -152,19 +155,18 @@ ret_from_exception:
 	andw	#ALLOWINT,%sr
 
 resume_userspace:
-	movel	%curptr@(TASK_WORK),%d0
-	lsrl	#8,%d0
+	moveb	%curptr@(TASK_INFO+TINFO_FLAGS+3),%d0
 	jne	exit_work
 1:	RESTORE_ALL
 
 exit_work:
 	| save top of frame
 	movel	%sp,%curptr@(TASK_THREAD+THREAD_ESP0)
-	tstb	%d0
-	jeq	do_signal_return
-
+	lslb	#1,%d0
+	jmi	do_signal_return
 	pea	resume_userspace
-	jmp	schedule
+	jra	schedule
+
 
 do_signal_return:
 	|andw	#ALLOWINT,%sr
@@ -254,7 +256,7 @@ ret_from_interrupt:
 
 	/* check if we need to do software interrupts */
 	tstl	irq_stat+CPUSTAT_SOFTIRQ_PENDING
-	jeq	ret_from_exception
+	jeq	.Lret_from_exception
 	pea	ret_from_exception
 	jra	do_softirq
 
diff --git a/arch/m68k/kernel/process.c b/arch/m68k/kernel/process.c
index 11b1b90ba6ba..13d109328a42 100644
--- a/arch/m68k/kernel/process.c
+++ b/arch/m68k/kernel/process.c
@@ -102,7 +102,9 @@ void cpu_idle(void)
 	while (1) {
 		while (!need_resched())
 			idle();
+		preempt_enable_no_resched();
 		schedule();
+		preempt_disable();
 	}
 }
 
diff --git a/arch/m68k/kernel/ptrace.c b/arch/m68k/kernel/ptrace.c
index 8ed1b01a6a87..540638ca81f9 100644
--- a/arch/m68k/kernel/ptrace.c
+++ b/arch/m68k/kernel/ptrace.c
@@ -109,7 +109,7 @@ static inline void singlestep_disable(struct task_struct *child)
 {
 	unsigned long tmp = get_reg(child, PT_SR) & ~(TRACE_BITS << 16);
 	put_reg(child, PT_SR, tmp);
-	child->thread.work.delayed_trace = 0;
+	clear_tsk_thread_flag(child, TIF_DELAYED_TRACE);
 }
 
 /*
@@ -118,51 +118,14 @@ static inline void singlestep_disable(struct task_struct *child)
 void ptrace_disable(struct task_struct *child)
 {
 	singlestep_disable(child);
-	child->thread.work.syscall_trace = 0;
+	clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
 }
 
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
-	struct task_struct *child;
 	unsigned long tmp;
 	int i, ret = 0;
 
-	lock_kernel();
-	if (request == PTRACE_TRACEME) {
-		/* are we already being traced? */
-		if (current->ptrace & PT_PTRACED) {
-			ret = -EPERM;
-			goto out;
-		}
-		/* set the ptrace bit in the process flags. */
-		current->ptrace |= PT_PTRACED;
-		goto out;
-	}
-	read_lock(&tasklist_lock);
-	child = find_task_by_pid(pid);
-	if (child)
-		get_task_struct(child);
-	read_unlock(&tasklist_lock);
-	if (unlikely(!child)) {
-		ret = -ESRCH;
-		goto out;
-	}
-
-	/* you may not mess with init */
-	if (unlikely(pid == 1)) {
-		ret = -EPERM;
-		goto out_tsk;
-	}
-
-	if (request == PTRACE_ATTACH) {
-		ret = ptrace_attach(child);
-		goto out_tsk;
-	}
-
-	ret = ptrace_check_attach(child, request == PTRACE_KILL);
-	if (ret)
-		goto out_tsk;
-
 	switch (request) {
 	/* when I and D space are separate, these will need to be fixed. */
 	case PTRACE_PEEKTEXT:	/* read word at location addr. */
@@ -235,9 +198,9 @@ asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
 			goto out_eio;
 
 		if (request == PTRACE_SYSCALL)
-			child->thread.work.syscall_trace = ~0;
+			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
 		else
-			child->thread.work.syscall_trace = 0;
+			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
 		child->exit_code = data;
 		singlestep_disable(child);
 		wake_up_process(child);
@@ -260,10 +223,10 @@ asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
 		if (!valid_signal(data))
 			goto out_eio;
 
-		child->thread.work.syscall_trace = 0;
+		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
 		tmp = get_reg(child, PT_SR) | (TRACE_BITS << 16);
 		put_reg(child, PT_SR, tmp);
-		child->thread.work.delayed_trace = 1;
+		set_tsk_thread_flag(child, TIF_DELAYED_TRACE);
 
 		child->exit_code = data;
 		/* give it a chance to run. */
@@ -317,21 +280,14 @@ asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
 		ret = ptrace_request(child, request, addr, data);
 		break;
 	}
-out_tsk:
-	put_task_struct(child);
-out:
-	unlock_kernel();
+
 	return ret;
 out_eio:
-	ret = -EIO;
-	goto out_tsk;
+	return -EIO;
 }
 
 asmlinkage void syscall_trace(void)
 {
-	if (!current->thread.work.delayed_trace &&
-	    !current->thread.work.syscall_trace)
-		return;
 	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
 				 ? 0x80 : 0));
 	/*
diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c
index 4ec95e3cb874..98e4b1adfa29 100644
--- a/arch/m68k/kernel/time.c
+++ b/arch/m68k/kernel/time.c
@@ -27,10 +27,6 @@
 #include <linux/timex.h>
 #include <linux/profile.h>
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 static inline int set_rtc_mmss(unsigned long nowtime)
 {
   if (mach_set_clock_mmss)
diff --git a/arch/m68k/mm/kmap.c b/arch/m68k/mm/kmap.c
index 5dcb3fa35ea9..fe2383e36b06 100644
--- a/arch/m68k/mm/kmap.c
+++ b/arch/m68k/mm/kmap.c
@@ -201,7 +201,7 @@ void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag)
 			virtaddr += PTRTREESIZE;
 			size -= PTRTREESIZE;
 		} else {
-			pte_dir = pte_alloc_kernel(&init_mm, pmd_dir, virtaddr);
+			pte_dir = pte_alloc_kernel(pmd_dir, virtaddr);
 			if (!pte_dir) {
 				printk("ioremap: no mem for pte_dir\n");
 				return NULL;
diff --git a/arch/m68k/sun3x/dvma.c b/arch/m68k/sun3x/dvma.c
index 32e55adfeb8e..117481e86305 100644
--- a/arch/m68k/sun3x/dvma.c
+++ b/arch/m68k/sun3x/dvma.c
@@ -116,7 +116,7 @@ inline int dvma_map_cpu(unsigned long kaddr,
 			pte_t *pte;
 			unsigned long end3;
 
-			if((pte = pte_alloc_kernel(&init_mm, pmd, vaddr)) == NULL) {
+			if((pte = pte_alloc_kernel(pmd, vaddr)) == NULL) {
 				ret = -ENOMEM;
 				goto out;
 			}
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index 8520df9cee6d..b96498120fe9 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -71,6 +71,11 @@ config M5206e
 	help
 	  Motorola ColdFire 5206e processor support.
 
+config M520x
+	bool "MCF520x"
+	help
+	   Freescale Coldfire 5207/5208 processor support.
+
 config M523x
 	bool "MCF523x"
 	help
@@ -120,7 +125,7 @@ config M527x
 
 config COLDFIRE
 	bool
-	depends on (M5206 || M5206e || M523x || M5249 || M527x || M5272 || M528x || M5307 || M5407)
+	depends on (M5206 || M5206e || M520x || M523x || M5249 || M527x || M5272 || M528x || M5307 || M5407)
 	default y
 
 choice
@@ -322,6 +327,12 @@ config ELITE
 	help
 	  Support for the Motorola M5206eLITE board.
 
+config M5208EVB
+	bool "Freescale M5208EVB board support"
+	depends on M520x
+	help
+	  Support for the Freescale Coldfire M5208EVB.
+
 config M5235EVB
 	bool "Freescale M5235EVB support"
 	depends on M523x
@@ -465,10 +476,10 @@ config ARNEWSH
 	default y
 	depends on (ARN5206 || ARN5307)
 
-config MOTOROLA
+config FREESCALE
 	bool
 	default y
-	depends on (M5206eC3 || M5235EVB || M5249C3 || M5271EVB || M5272C3 || M5275EVB || M5282EVB || M5307C3 || M5407C3)
+	depends on (M5206eC3 || M5208EVB || M5235EVB || M5249C3 || M5271EVB || M5272C3 || M5275EVB || M5282EVB || M5307C3 || M5407C3)
 
 config HW_FEITH
 	bool
diff --git a/arch/m68knommu/Makefile b/arch/m68knommu/Makefile
index b8fdf191b8f6..b6b5c14e55fd 100644
--- a/arch/m68knommu/Makefile
+++ b/arch/m68knommu/Makefile
@@ -14,6 +14,7 @@ platform-$(CONFIG_M68VZ328)	:= 68VZ328
 platform-$(CONFIG_M68360)	:= 68360
 platform-$(CONFIG_M5206)	:= 5206
 platform-$(CONFIG_M5206e)	:= 5206e
+platform-$(CONFIG_M520x)	:= 520x
 platform-$(CONFIG_M523x)	:= 523x
 platform-$(CONFIG_M5249)	:= 5249
 platform-$(CONFIG_M527x)	:= 527x
@@ -29,7 +30,7 @@ board-$(CONFIG_UCDIMM)		:= ucdimm
 board-$(CONFIG_UCQUICC)		:= uCquicc
 board-$(CONFIG_DRAGEN2)		:= de2
 board-$(CONFIG_ARNEWSH)		:= ARNEWSH
-board-$(CONFIG_MOTOROLA)	:= MOTOROLA
+board-$(CONFIG_FREESCALE)	:= FREESCALE
 board-$(CONFIG_M5235EVB)	:= M5235EVB
 board-$(CONFIG_M5271EVB)	:= M5271EVB
 board-$(CONFIG_M5275EVB)	:= M5275EVB
@@ -41,6 +42,7 @@ board-$(CONFIG_SECUREEDGEMP3)	:= MP3
 board-$(CONFIG_CLEOPATRA)	:= CLEOPATRA
 board-$(CONFIG_senTec)		:= senTec
 board-$(CONFIG_SNEHA) 	        := SNEHA
+board-$(CONFIG_M5208EVB)	:= M5208EVB
 board-$(CONFIG_MOD5272)		:= MOD5272
 BOARD := $(board-y)
 
@@ -56,6 +58,7 @@ MODEL := $(model-y)
 #
 cpuclass-$(CONFIG_M5206)	:= 5307
 cpuclass-$(CONFIG_M5206e)	:= 5307
+cpuclass-$(CONFIG_M520x)	:= 5307
 cpuclass-$(CONFIG_M523x)	:= 5307
 cpuclass-$(CONFIG_M5249)	:= 5307
 cpuclass-$(CONFIG_M527x)	:= 5307
@@ -80,6 +83,7 @@ export PLATFORM BOARD MODEL CPUCLASS
 #
 cflags-$(CONFIG_M5206)		:= -m5200 -Wa,-S -Wa,-m5200
 cflags-$(CONFIG_M5206e)		:= -m5200 -Wa,-S -Wa,-m5200
+cflags-$(CONFIG_M520x)		:= -m5307 -Wa,-S -Wa,-m5307
 cflags-$(CONFIG_M523x)		:= -m5307 -Wa,-S -Wa,-m5307
 cflags-$(CONFIG_M5249)		:= -m5200 -Wa,-S -Wa,-m5200
 cflags-$(CONFIG_M527x)		:= -m5307 -Wa,-S -Wa,-m5307
@@ -95,7 +99,6 @@ cflags-$(CONFIG_M68360)		:= -m68332
 AFLAGS += $(cflags-y)
 
 CFLAGS += $(cflags-y)
-CFLAGS += -fno-builtin
 CFLAGS += -O1 -g
 CFLAGS += -D__linux__
 CFLAGS += -DUTS_SYSNAME=\"uClinux\"
diff --git a/arch/m68knommu/defconfig b/arch/m68knommu/defconfig
index 87f2d6587c56..2d59ba1a79ba 100644
--- a/arch/m68knommu/defconfig
+++ b/arch/m68knommu/defconfig
@@ -99,7 +99,7 @@ CONFIG_M5272C3=y
 # CONFIG_NETtel is not set
 # CONFIG_CPU16B is not set
 # CONFIG_MOD5272 is not set
-CONFIG_MOTOROLA=y
+CONFIG_FREESCALE=y
 # CONFIG_LARGE_ALLOCS is not set
 CONFIG_4KSTACKS=y
 CONFIG_RAMAUTO=y
@@ -554,7 +554,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_MAGIC_ROM_PTR=y
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
 # CONFIG_DNOTIFY is not set
diff --git a/arch/m68knommu/kernel/asm-offsets.c b/arch/m68knommu/kernel/asm-offsets.c
index cd3ffe12653e..b988c7bdc6e4 100644
--- a/arch/m68knommu/kernel/asm-offsets.c
+++ b/arch/m68knommu/kernel/asm-offsets.c
@@ -15,6 +15,7 @@
 #include <linux/hardirq.h>
 #include <asm/bootinfo.h>
 #include <asm/irq.h>
+#include <asm/irqnode.h>
 #include <asm/thread_info.h>
 
 #define DEFINE(sym, val) \
diff --git a/arch/m68knommu/kernel/ptrace.c b/arch/m68knommu/kernel/ptrace.c
index 9724e1cd82e5..262ab8c72e5f 100644
--- a/arch/m68knommu/kernel/ptrace.c
+++ b/arch/m68knommu/kernel/ptrace.c
@@ -101,43 +101,10 @@ void ptrace_disable(struct task_struct *child)
 	put_reg(child, PT_SR, tmp);
 }
 
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+long arch_ptrace(truct task_struct *child, long request, long addr, long data)
 {
-	struct task_struct *child;
 	int ret;
 
-	lock_kernel();
-	ret = -EPERM;
-	if (request == PTRACE_TRACEME) {
-		/* are we already being traced? */
-		if (current->ptrace & PT_PTRACED)
-			goto out;
-		/* set the ptrace bit in the process flags. */
-		current->ptrace |= PT_PTRACED;
-		ret = 0;
-		goto out;
-	}
-	ret = -ESRCH;
-	read_lock(&tasklist_lock);
-	child = find_task_by_pid(pid);
-	if (child)
-		get_task_struct(child);
-	read_unlock(&tasklist_lock);
-	if (!child)
-		goto out;
-
-	ret = -EPERM;
-	if (pid == 1)		/* you may not mess with init */
-		goto out_tsk;
-
-	if (request == PTRACE_ATTACH) {
-		ret = ptrace_attach(child);
-		goto out_tsk;
-	}
-	ret = ptrace_check_attach(child, request == PTRACE_KILL);
-	if (ret < 0)
-		goto out_tsk;
-
 	switch (request) {
 		/* when I and D space are separate, these will need to be fixed. */
 		case PTRACE_PEEKTEXT: /* read word at location addr. */ 
@@ -357,10 +324,6 @@ asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
 			ret = -EIO;
 			break;
 	}
-out_tsk:
-	put_task_struct(child);
-out:
-	unlock_kernel();
 	return ret;
 }
 
diff --git a/arch/m68knommu/kernel/setup.c b/arch/m68knommu/kernel/setup.c
index a220345e9746..abb80fa2b940 100644
--- a/arch/m68knommu/kernel/setup.c
+++ b/arch/m68knommu/kernel/setup.c
@@ -107,6 +107,9 @@ void (*mach_power_off)( void ) = NULL;
 #if defined(CONFIG_M5206e)
 	#define	CPU "COLDFIRE(m5206e)"
 #endif
+#if defined(CONFIG_M520x)
+	#define CPU "COLDFIRE(m520x)"
+#endif
 #if defined(CONFIG_M523x)
 	#define CPU "COLDFIRE(m523x)"
 #endif
@@ -132,7 +135,7 @@ void (*mach_power_off)( void ) = NULL;
 	#define	CPU "COLDFIRE(m5407)"
 #endif
 #ifndef CPU
-	#define	CPU "UNKOWN"
+	#define	CPU "UNKNOWN"
 #endif
 
 /* (es) */
diff --git a/arch/m68knommu/kernel/time.c b/arch/m68knommu/kernel/time.c
index b17c1ecba966..b9d8abb45430 100644
--- a/arch/m68knommu/kernel/time.c
+++ b/arch/m68knommu/kernel/time.c
@@ -27,10 +27,6 @@
 
 #define	TICK_SIZE (tick_nsec / 1000)
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 extern unsigned long wall_jiffies;
 
 
diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S
index 47f06787190d..0eab92ca4b97 100644
--- a/arch/m68knommu/kernel/vmlinux.lds.S
+++ b/arch/m68knommu/kernel/vmlinux.lds.S
@@ -125,6 +125,14 @@
 #endif
 
 /*
+ *	The Freescale 5208EVB board has 32MB of RAM.
+ */
+#if defined(CONFIG_M5208EVB)
+#define	RAM_START	0x40020000
+#define	RAM_LENGTH	0x01e00000
+#endif
+
+/*
  *	The senTec COBRA5272 board has nearly the same memory layout as 
  *	the M5272C3. We assume 16MiB ram.
  */
@@ -275,6 +283,7 @@ SECTIONS {
 		*(__ksymtab_strings)
 
 		/* Built-in module parameters */
+		. = ALIGN(4) ;
 		__start___param = .;
 		*(__param)
 		__stop___param = .;
diff --git a/arch/m68knommu/platform/520x/Makefile b/arch/m68knommu/platform/520x/Makefile
new file mode 100644
index 000000000000..e861b05106bc
--- /dev/null
+++ b/arch/m68knommu/platform/520x/Makefile
@@ -0,0 +1,19 @@
+#
+# Makefile for the M5208 specific file.
+#
+
+#
+# If you want to play with the HW breakpoints then you will
+# need to add define this,  which will give you a stack backtrace
+# on the console port whenever a DBG interrupt occurs.  You have to
+# set up you HW breakpoints to trigger a DBG interrupt:
+#
+# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT
+# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
+#
+
+ifdef CONFIG_FULLDEBUG
+AFLAGS += -DDEBUGGER_COMPATIBLE_CACHE=1
+endif
+
+obj-y := config.o
diff --git a/arch/m68knommu/platform/520x/config.c b/arch/m68knommu/platform/520x/config.c
new file mode 100644
index 000000000000..71dea2e0f452
--- /dev/null
+++ b/arch/m68knommu/platform/520x/config.c
@@ -0,0 +1,65 @@
+/***************************************************************************/
+
+/*
+ *  linux/arch/m68knommu/platform/520x/config.c
+ *
+ *  Copyright (C) 2005,      Freescale (www.freescale.com)
+ *  Copyright (C) 2005,      Intec Automation (mike@steroidmicros.com)
+ *  Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com)
+ *  Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <asm/machdep.h>
+#include <asm/dma.h>
+
+/***************************************************************************/
+
+/*
+ *	DMA channel base address table.
+ */
+unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS];
+unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
+
+/***************************************************************************/
+
+void coldfire_pit_tick(void);
+void coldfire_pit_init(irqreturn_t (*handler)(int, void *, struct pt_regs *));
+unsigned long coldfire_pit_offset(void);
+void coldfire_trap_init(void);
+void coldfire_reset(void);
+
+/***************************************************************************/
+
+/*
+ *  Program the vector to be an auto-vectored.
+ */
+
+void mcf_autovector(unsigned int vec)
+{
+    /* Everything is auto-vectored on the 520x devices */
+}
+
+/***************************************************************************/
+
+void config_BSP(char *commandp, int size)
+{
+#ifdef CONFIG_BOOTPARAM
+    strncpy(commandp, CONFIG_BOOTPARAM_STRING, size);
+    commandp[size-1] = 0;
+#else
+    memset(commandp, 0, size);
+#endif
+
+    mach_sched_init = coldfire_pit_init;
+    mach_tick = coldfire_pit_tick;
+    mach_gettimeoffset = coldfire_pit_offset;
+    mach_trap_init = coldfire_trap_init;
+    mach_reset = coldfire_reset;
+}
+
+/***************************************************************************/
diff --git a/arch/m68knommu/platform/5307/Makefile b/arch/m68knommu/platform/5307/Makefile
index 6fe5a2b8fb08..8d1619dc1ea6 100644
--- a/arch/m68knommu/platform/5307/Makefile
+++ b/arch/m68knommu/platform/5307/Makefile
@@ -19,6 +19,7 @@ endif
 obj-$(CONFIG_COLDFIRE)	+= entry.o vectors.o ints.o
 obj-$(CONFIG_M5206)	+= timers.o
 obj-$(CONFIG_M5206e)	+= timers.o
+obj-$(CONFIG_M520x)	+= pit.o
 obj-$(CONFIG_M523x)	+= pit.o
 obj-$(CONFIG_M5249)	+= timers.o
 obj-$(CONFIG_M527x)     += pit.o
diff --git a/arch/m68knommu/platform/5307/head.S b/arch/m68knommu/platform/5307/head.S
index 7f4ba837901f..c30c462b99b1 100644
--- a/arch/m68knommu/platform/5307/head.S
+++ b/arch/m68knommu/platform/5307/head.S
@@ -113,6 +113,9 @@
 #define MEM_BASE	0x02000000
 #define VBR_BASE	0x20000000	/* vectors in SRAM */
 #endif
+#if defined(CONFIG_M5208EVB)
+#define MEM_BASE	0x40000000
+#endif
 
 #ifndef MEM_BASE
 #define	MEM_BASE	0x00000000	/* memory base at address 0 */
diff --git a/arch/m68knommu/platform/5307/ints.c b/arch/m68knommu/platform/5307/ints.c
index 0117754d44f3..a134fb2f0566 100644
--- a/arch/m68knommu/platform/5307/ints.c
+++ b/arch/m68knommu/platform/5307/ints.c
@@ -26,6 +26,7 @@
 
 #include <asm/system.h>
 #include <asm/irq.h>
+#include <asm/irqnode.h>
 #include <asm/traps.h>
 #include <asm/page.h>
 #include <asm/machdep.h>
diff --git a/arch/m68knommu/platform/5307/pit.c b/arch/m68knommu/platform/5307/pit.c
index a9b2c2e7e280..323f2677e49d 100644
--- a/arch/m68knommu/platform/5307/pit.c
+++ b/arch/m68knommu/platform/5307/pit.c
@@ -3,7 +3,7 @@
 /*
  *	pit.c -- Motorola ColdFire PIT timer. Currently this type of
  *	         hardware timer only exists in the Motorola ColdFire
- *		 5270/5271 and 5282 CPUs.
+ *		 5270/5271, 5282 and other CPUs.
  *
  *	Copyright (C) 1999-2004, Greg Ungerer (gerg@snapgear.com)
  *	Copyright (C) 2001-2004, SnapGear Inc. (www.snapgear.com)
@@ -47,10 +47,10 @@ void coldfire_pit_init(irqreturn_t (*handler)(int, void *, struct pt_regs *))
 
 	icrp = (volatile unsigned char *) (MCF_IPSBAR + MCFICM_INTC0 +
 		MCFINTC_ICR0 + MCFINT_PIT1);
-	*icrp = 0x2b; /* PIT1 with level 5, priority 3 */
+	*icrp = ICR_INTRCONF;
 
-	imrp = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
-	*imrp &= ~(1 << (MCFINT_PIT1 - 32));
+	imrp = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFPIT_IMR);
+	*imrp &= ~MCFPIT_IMR_IBIT;
 
 	/* Set up PIT timer 1 as poll clock */
 	tp = (volatile struct mcfpit *) (MCF_IPSBAR + MCFPIT_BASE1);
@@ -70,7 +70,7 @@ unsigned long coldfire_pit_offset(void)
 	unsigned long pmr, pcntr, offset;
 
 	tp = (volatile struct mcfpit *) (MCF_IPSBAR + MCFPIT_BASE1);
-	ipr = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IPRH);
+	ipr = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFPIT_IMR);
 
 	pmr = *(&tp->pmr);
 	pcntr = *(&tp->pcntr);
@@ -80,7 +80,7 @@ unsigned long coldfire_pit_offset(void)
 	 * timer interupt is pending, then add on a ticks worth of time.
 	 */
 	offset = ((pmr - pcntr) * (1000000 / HZ)) / pmr;
-	if ((offset < (1000000 / HZ / 2)) && (*ipr & (1 << (MCFINT_PIT1 - 32))))
+	if ((offset < (1000000 / HZ / 2)) && (*ipr & MCFPIT_IMR_IBIT))
 		offset += 1000000 / HZ;
 	return offset;	
 }
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 4cd724c05700..b50be449d3f5 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -4,216 +4,145 @@ config MIPS
 	# Horrible source of confusion.  Die, die, die ...
 	select EMBEDDED
 
-# shouldn't it be per-subarchitecture?
-config ARCH_MAY_HAVE_PC_FDC
-	bool
-	default y
-
 mainmenu "Linux/MIPS Kernel Configuration"
 
-source "init/Kconfig"
-
-config SYS_SUPPORTS_32BIT_KERNEL
-	bool
-config SYS_SUPPORTS_64BIT_KERNEL
-	bool
-config CPU_SUPPORTS_32BIT_KERNEL
-	bool
-config CPU_SUPPORTS_64BIT_KERNEL
-	bool
-
-menu "Kernel type"
-
-choice
-
-	prompt "Kernel code model"
-	help
-	  You should only select this option if you have a workload that
-	  actually benefits from 64-bit processing or if your machine has
-	  large memory.  You will only be presented a single option in this
-	  menu if your system does not support both 32-bit and 64-bit kernels.
-
-config 32BIT
-	bool "32-bit kernel"
-	depends on CPU_SUPPORTS_32BIT_KERNEL && SYS_SUPPORTS_32BIT_KERNEL
-	select TRAD_SIGNALS
-	help
-	  Select this option if you want to build a 32-bit kernel.
-
-config 64BIT
-	bool "64-bit kernel"
-	depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL
-	help
-	  Select this option if you want to build a 64-bit kernel.
-
-endchoice
-
-endmenu
-
 menu "Machine selection"
 
-config MACH_JAZZ
-	bool "Support for the Jazz family of machines"
-	select ARC
-	select ARC32
-	select GENERIC_ISA_DMA
-	select I8259
-	select ISA
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
-	help
-	 This a family of machines based on the MIPS R4030 chipset which was
-	 used by several vendors to build RISC/os and Windows NT workstations.
-	 Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
-	 Olivetti M700-10 workstations.
+choice
+	prompt "System type"
+	default SGI_IP22
 
-config ACER_PICA_61
-	bool "Support for Acer PICA 1 chipset (EXPERIMENTAL)"
-	depends on MACH_JAZZ && EXPERIMENTAL
+config MIPS_MTX1
+	bool "Support for 4G Systems MTX-1 board"
 	select DMA_NONCOHERENT
-	help
-	  This is a machine with a R4400 133/150 MHz CPU. To compile a Linux
-	  kernel that runs on these, say Y here. For details about Linux on
-	  the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
-	  <http://www.linux-mips.org/>.
+	select HW_HAS_PCI
+	select SOC_AU1500
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config MIPS_MAGNUM_4000
-	bool "Support for MIPS Magnum 4000"
-	depends on MACH_JAZZ
+config MIPS_BOSPORUS
+	bool "AMD Alchemy Bosporus board"
+	select SOC_AU1500
 	select DMA_NONCOHERENT
-	help
-	  This is a machine with a R4000 100 MHz CPU. To compile a Linux
-	  kernel that runs on these, say Y here. For details about Linux on
-	  the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
-	  <http://www.linux-mips.org/>.
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config OLIVETTI_M700
-	bool "Support for Olivetti M700-10"
-	depends on MACH_JAZZ
+config MIPS_PB1000
+	bool "AMD Alchemy PB1000 board"
+	select SOC_AU1000
 	select DMA_NONCOHERENT
-	help
-	  This is a machine with a R4000 100 MHz CPU. To compile a Linux
-	  kernel that runs on these, say Y here. For details about Linux on
-	  the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
-	  <http://www.linux-mips.org/>.
-
-config MACH_VR41XX
-	bool "Support for NEC VR4100 series based machines"
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+	select HW_HAS_PCI
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config NEC_CMBVR4133
-	bool "Support for NEC CMB-VR4133"
-	depends on MACH_VR41XX
-	select CPU_VR41XX
+config MIPS_PB1100
+	bool "AMD Alchemy PB1100 board"
+	select SOC_AU1100
 	select DMA_NONCOHERENT
-	select IRQ_CPU
 	select HW_HAS_PCI
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config ROCKHOPPER
-	bool "Support for Rockhopper baseboard"
-	depends on NEC_CMBVR4133
-	select I8259
-	select HAVE_STD_PC_SERIAL_PORT
+config MIPS_PB1500
+	bool "AMD Alchemy PB1500 board"
+	select SOC_AU1500
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config CASIO_E55
-	bool "Support for CASIO CASSIOPEIA E-10/15/55/65"
-	depends on MACH_VR41XX
-	select CPU_LITTLE_ENDIAN
+config MIPS_PB1550
+	bool "AMD Alchemy PB1550 board"
+	select SOC_AU1550
 	select DMA_NONCOHERENT
-	select IRQ_CPU
-	select ISA
+	select HW_HAS_PCI
+	select MIPS_DISABLE_OBSOLETE_IDE
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config IBM_WORKPAD
-	bool "Support for IBM WorkPad z50"
-	depends on MACH_VR41XX
-	select CPU_LITTLE_ENDIAN
+config MIPS_PB1200
+	bool "AMD Alchemy PB1200 board"
+	select SOC_AU1200
 	select DMA_NONCOHERENT
-	select IRQ_CPU
-	select ISA
+	select MIPS_DISABLE_OBSOLETE_IDE
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config TANBAC_TB022X
-	bool "Support for TANBAC VR4131 multichip module and TANBAC VR4131DIMM"
-	depends on MACH_VR41XX
-	select CPU_LITTLE_ENDIAN
+config MIPS_DB1000
+	bool "AMD Alchemy DB1000 board"
+	select SOC_AU1000
 	select DMA_NONCOHERENT
-	select IRQ_CPU
 	select HW_HAS_PCI
-	help
-	  The TANBAC VR4131 multichip module(TB0225) and
-	  the TANBAC VR4131DIMM(TB0229) are MIPS-based platforms
-	  manufactured by TANBAC.
-	  Please refer to <http://www.tanbac.co.jp/>
-	  about VR4131 multichip module and VR4131DIMM.
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config TANBAC_TB0226
-	bool "Support for TANBAC Mbase(TB0226)"
-	depends on TANBAC_TB022X
-	select GPIO_VR41XX
-	help
-	  The TANBAC Mbase(TB0226) is a MIPS-based platform manufactured by TANBAC.
-	  Please refer to <http://www.tanbac.co.jp/> about Mbase.
-
-config TANBAC_TB0287
-	bool "Support for TANBAC Mini-ITX DIMM base(TB0287)"
-	depends on TANBAC_TB022X
-	help
-	  The TANBAC Mini-ITX DIMM base(TB0287) is a MIPS-based platform manufactured by TANBAC.
-	  Please refer to <http://www.tanbac.co.jp/> about Mini-ITX DIMM base.
-
-config VICTOR_MPC30X
-	bool "Support for Victor MP-C303/304"
-	depends on MACH_VR41XX
-	select CPU_LITTLE_ENDIAN
+config MIPS_DB1100
+	bool "AMD Alchemy DB1100 board"
+	select SOC_AU1100
 	select DMA_NONCOHERENT
-	select IRQ_CPU
-	select HW_HAS_PCI
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config ZAO_CAPCELLA
-	bool "Support for ZAO Networks Capcella"
-	depends on MACH_VR41XX
-	select CPU_LITTLE_ENDIAN
+config MIPS_DB1500
+	bool "AMD Alchemy DB1500 board"
+	select SOC_AU1500
 	select DMA_NONCOHERENT
-	select IRQ_CPU
 	select HW_HAS_PCI
+	select MIPS_DISABLE_OBSOLETE_IDE
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config PCI_VR41XX
-	bool "Add PCI control unit support of NEC VR4100 series"
-	depends on MACH_VR41XX && HW_HAS_PCI
-	default y
-	select PCI
+config MIPS_DB1550
+	bool "AMD Alchemy DB1550 board"
+	select SOC_AU1550
+	select HW_HAS_PCI
+	select DMA_NONCOHERENT
+	select MIPS_DISABLE_OBSOLETE_IDE
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config VRC4173
-	tristate "Add NEC VRC4173 companion chip support"
-	depends on MACH_VR41XX && PCI_VR41XX
-	---help---
-	  The NEC VRC4173 is a companion chip for NEC VR4122/VR4131.
+config MIPS_DB1200
+	bool "AMD Alchemy DB1200 board"
+	select SOC_AU1200
+	select DMA_COHERENT
+	select MIPS_DISABLE_OBSOLETE_IDE
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config TOSHIBA_JMR3927
-	bool "Support for Toshiba JMR-TX3927 board"
+config MIPS_MIRAGE
+	bool "AMD Alchemy Mirage board"
 	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select SWAP_IO_SPACE
-	select SYS_SUPPORTS_32BIT_KERNEL
+	select SOC_AU1500
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config MIPS_COBALT
 	bool "Support for Cobalt Server"
-	depends on EXPERIMENTAL
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select I8259
 	select IRQ_CPU
+	select MIPS_GT64111
+	select SYS_HAS_CPU_NEVADA
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config MACH_DECSTATION
 	bool "Support for DECstations"
 	select BOOT_ELF32
 	select DMA_NONCOHERENT
+	select EARLY_PRINTK
 	select IRQ_CPU
+	select SYS_HAS_CPU_R3000
+	select SYS_HAS_CPU_R4X00
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
-	---help---
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	help
 	  This enables support for DEC's MIPS based workstations.  For details
 	  see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the
 	  DECstation porting pages on <http://decstation.unix-ag.org/>.
@@ -234,8 +163,10 @@ config MIPS_EV64120
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select MIPS_GT64120
+	select SYS_HAS_CPU_R5000
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
 	help
 	  This is an evaluation board based on the Galileo GT-64120
 	  single-chip system controller that contains a MIPS R5000 compatible
@@ -243,10 +174,6 @@ config MIPS_EV64120
 	  <http://www.marvell.com/>.  Say Y here if you wish to build a
 	  kernel for this platform.
 
-config EVB_PCI1
-	bool "Enable Second PCI (PCI1)"
-	depends on MIPS_EV64120
-
 config MIPS_EV96100
 	bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
@@ -256,8 +183,11 @@ config MIPS_EV96100
 	select MIPS_GT96100
 	select RM7000_CPU_SCACHE
 	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_R5000
+	select SYS_HAS_CPU_RM7000
 	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+	select SYS_SUPPORTS_BIG_ENDIAN
 	help
 	  This is an evaluation board based on the Galileo GT-96100 LAN/WAN
 	  communications controllers containing a MIPS R5000 compatible core
@@ -268,8 +198,11 @@ config MIPS_IVR
 	bool "Support for Globespan IVR board"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
+	select ITE_BOARD_GEN
+	select SYS_HAS_CPU_NEVADA
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
 	  This is an evaluation board built by Globespan to showcase thir
 	  iVR (Internet Video Recorder) design. It utilizes a QED RM5231
@@ -277,37 +210,16 @@ config MIPS_IVR
 	  located at <http://www.globespan.net/>. Say Y here if you wish to
 	  build a kernel for this platform.
 
-config LASAT
-	bool "Support for LASAT Networks platforms"
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select MIPS_GT64120
-	select R5000_CPU_SCACHE
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
-
-config PICVUE
-	tristate "PICVUE LCD display driver"
-	depends on LASAT
-
-config PICVUE_PROC
-	tristate "PICVUE LCD display driver /proc interface"
-	depends on PICVUE
-
-config DS1603
-	bool "DS1603 RTC driver"
-	depends on LASAT
-
-config LASAT_SYSCTL
-	bool "LASAT sysctl interface"
-	depends on LASAT
-
 config MIPS_ITE8172
 	bool "Support for ITE 8172G board"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
+	select ITE_BOARD_GEN
+	select SYS_HAS_CPU_R5432
+	select SYS_HAS_CPU_NEVADA
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
 	  Ths is an evaluation board made by ITE <http://www.ite.com.tw/>
 	  with ATX form factor that utilizes a MIPS R5000 to work with its
@@ -315,42 +227,86 @@ config MIPS_ITE8172
 	  either a NEC Vr5432 or QED RM5231. Say Y here if you wish to build
 	  a kernel for this platform.
 
-config IT8172_REVC
-	bool "Support for older IT8172 (Rev C)"
-	depends on MIPS_ITE8172
+config MACH_JAZZ
+	bool "Support for the Jazz family of machines"
+	select ARC
+	select ARC32
+	select ARCH_MAY_HAVE_PC_FDC
+	select GENERIC_ISA_DMA
+	select I8259
+	select ISA
+	select SYS_HAS_CPU_R4X00
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
 	help
-	  Say Y here to support the older, Revision C version of the Integrated
-	  Technology Express, Inc. ITE8172 SBC.  Vendor page at
-	  <http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
-	  board at <http://www.mvista.com/partners/semiconductor/ite.html>.
+	 This a family of machines based on the MIPS R4030 chipset which was
+	 used by several vendors to build RISC/os and Windows NT workstations.
+	 Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
+	 Olivetti M700-10 workstations.
+
+config LASAT
+	bool "Support for LASAT Networks platforms"
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select MIPS_GT64120
+	select MIPS_NILE4
+	select R5000_CPU_SCACHE
+	select SYS_HAS_CPU_R5000
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config MIPS_ATLAS
 	bool "Support for MIPS Atlas board"
 	select BOOT_ELF32
 	select DMA_NONCOHERENT
+	select IRQ_CPU
 	select HW_HAS_PCI
+	select MIPS_BOARDS_GEN
+	select MIPS_BONITO64
 	select MIPS_GT64120
+	select MIPS_MSC
+	select RM7000_CPU_SCACHE
 	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_HAS_CPU_MIPS64_R1
+	select SYS_HAS_CPU_NEVADA
+	select SYS_HAS_CPU_RM7000
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
-	  This enables support for the QED R5231-based MIPS Atlas evaluation
+	  This enables support for the MIPS Technologies Atlas evaluation
 	  board.
 
 config MIPS_MALTA
 	bool "Support for MIPS Malta board"
+	select ARCH_MAY_HAVE_PC_FDC
 	select BOOT_ELF32
 	select HAVE_STD_PC_SERIAL_PORT
 	select DMA_NONCOHERENT
+	select IRQ_CPU
 	select GENERIC_ISA_DMA
 	select HW_HAS_PCI
 	select I8259
+	select MIPS_BOARDS_GEN
+	select MIPS_BONITO64
 	select MIPS_GT64120
+	select MIPS_MSC
 	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_HAS_CPU_MIPS64_R1
+	select SYS_HAS_CPU_NEVADA
+	select SYS_HAS_CPU_RM7000
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
-	  This enables support for the VR5000-based MIPS Malta evaluation
+	  This enables support for the MIPS Technologies Malta evaluation
 	  board.
 
 config MIPS_SEAD
@@ -358,50 +314,64 @@ config MIPS_SEAD
 	depends on EXPERIMENTAL
 	select IRQ_CPU
 	select DMA_NONCOHERENT
+	select MIPS_BOARDS_GEN
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_HAS_CPU_MIPS64_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	help
+	  This enables support for the MIPS Technologies SEAD evaluation
+	  board.
 
-config MOMENCO_OCELOT
-	bool "Support for Momentum Ocelot board"
+config MIPS_SIM
+	bool 'Support for MIPS simulator (MIPSsim)'
 	select DMA_NONCOHERENT
-	select HW_HAS_PCI
 	select IRQ_CPU
-	select IRQ_CPU_RM7K
-	select MIPS_GT64120
-	select RM7000_CPU_SCACHE
-	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
-	  The Ocelot is a MIPS-based Single Board Computer (SBC) made by
-	  Momentum Computer <http://www.momenco.com/>.
+	  This option enables support for MIPS Technologies MIPSsim software
+	  emulator.
 
-config MOMENCO_OCELOT_G
-	bool "Support for Momentum Ocelot-G board"
+config MOMENCO_JAGUAR_ATX
+	bool "Support for Momentum Jaguar board"
+	select BOOT_ELF32
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select IRQ_CPU
 	select IRQ_CPU_RM7K
+	select IRQ_MV64340
+	select LIMITED_DMA
 	select PCI_MARVELL
 	select RM7000_CPU_SCACHE
 	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_RM9000
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
 	help
-	  The Ocelot is a MIPS-based Single Board Computer (SBC) made by
+	  The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by
 	  Momentum Computer <http://www.momenco.com/>.
 
-config MOMENCO_OCELOT_C
-	bool "Support for Momentum Ocelot-C board"
+config MOMENCO_OCELOT
+	bool "Support for Momentum Ocelot board"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select IRQ_CPU
-	select IRQ_MV64340
-	select PCI_MARVELL
+	select IRQ_CPU_RM7K
+	select MIPS_GT64120
 	select RM7000_CPU_SCACHE
 	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_RM7000
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
 	help
 	  The Ocelot is a MIPS-based Single Board Computer (SBC) made by
 	  Momentum Computer <http://www.momenco.com/>.
@@ -417,80 +387,95 @@ config MOMENCO_OCELOT_3
 	select PCI_MARVELL
 	select RM7000_CPU_SCACHE
 	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_RM9000
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
 	help
 	  The Ocelot-3 is based off Discovery III System Controller and
 	  PMC-Sierra Rm79000 core.
 
-config MOMENCO_JAGUAR_ATX
-	bool "Support for Momentum Jaguar board"
-	select BOOT_ELF32
+config MOMENCO_OCELOT_C
+	bool "Support for Momentum Ocelot-C board"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select IRQ_CPU
-	select IRQ_CPU_RM7K
 	select IRQ_MV64340
-	select LIMITED_DMA
 	select PCI_MARVELL
 	select RM7000_CPU_SCACHE
 	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_RM7000
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
 	help
-	  The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by
+	  The Ocelot is a MIPS-based Single Board Computer (SBC) made by
 	  Momentum Computer <http://www.momenco.com/>.
 
-config JAGUAR_DMALOW
-	bool "Low DMA Mode"
-	depends on MOMENCO_JAGUAR_ATX
-	help
-	  Select to Y if jump JP5 is set on your board, N otherwise.  Normally
-	  the jumper is set, so if you feel unsafe, just say Y.
-
-config PMC_YOSEMITE
-	bool "Support for PMC-Sierra Yosemite eval board"
-	select DMA_COHERENT
+config MOMENCO_OCELOT_G
+	bool "Support for Momentum Ocelot-G board"
+	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select IRQ_CPU
 	select IRQ_CPU_RM7K
-	select IRQ_CPU_RM9K
+	select PCI_MARVELL
+	select RM7000_CPU_SCACHE
 	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_RM7000
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
 	help
-	  Yosemite is an evaluation board for the RM9000x2 processor
-	  manufactured by PMC-Sierra
+	  The Ocelot is a MIPS-based Single Board Computer (SBC) made by
+	  Momentum Computer <http://www.momenco.com/>.
+
+config MIPS_XXS1500
+	bool "Support for MyCable XXS1500 board"
+	select DMA_NONCOHERENT
+	select SOC_AU1500
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config HYPERTRANSPORT
-	bool "Hypertransport Support for PMC-Sierra Yosemite"
-	depends on PMC_YOSEMITE
+config PNX8550_V2PCI
+	bool "Support for Philips PNX8550 based Viper2-PCI board"
+	select PNX8550
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config PNX8550_JBS
+	bool "Support for Philips PNX8550 based JBS board"
+	select PNX8550
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config DDB5074
 	bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
+	select DDB5XXX_COMMON
 	select DMA_NONCOHERENT
 	select HAVE_STD_PC_SERIAL_PORT
 	select HW_HAS_PCI
 	select IRQ_CPU
 	select I8259
 	select ISA
+	select SYS_HAS_CPU_R5000
 	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
 	  This enables support for the VR5000-based NEC DDB Vrc-5074
 	  evaluation board.
 
 config DDB5476
 	bool "Support for NEC DDB Vrc-5476"
+	select DDB5XXX_COMMON
 	select DMA_NONCOHERENT
 	select HAVE_STD_PC_SERIAL_PORT
 	select HW_HAS_PCI
 	select IRQ_CPU
 	select I8259
 	select ISA
+	select SYS_HAS_CPU_R5432
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
 	  This enables support for the R5432-based NEC DDB Vrc-5476
 	  evaluation board.
@@ -501,12 +486,15 @@ config DDB5476
 
 config DDB5477
 	bool "Support for NEC DDB Vrc-5477"
+	select DDB5XXX_COMMON
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select I8259
 	select IRQ_CPU
+	select SYS_HAS_CPU_R5432
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
 	  This enables support for the R5432-based NEC DDB Vrc-5477,
 	  or Rockhopper/SolutionGear boards with R5432/R5500 CPUs.
@@ -514,10 +502,28 @@ config DDB5477
 	  Features : kernel debugging, serial terminal, NFS root fs, on-board
 	  ether port USB, AC97, PCI, etc.
 
-config DDB5477_BUS_FREQUENCY
-	int "bus frequency (in kHZ, 0 for auto-detect)"
-	depends on DDB5477
-	default 0
+config MACH_VR41XX
+	bool "Support for NEC VR4100 series based machines"
+	select SYS_HAS_CPU_VR41XX
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+
+config PMC_YOSEMITE
+	bool "Support for PMC-Sierra Yosemite eval board"
+	select DMA_COHERENT
+	select HW_HAS_PCI
+	select IRQ_CPU
+	select IRQ_CPU_RM7K
+	select IRQ_CPU_RM9K
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_RM9000
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	help
+	  Yosemite is an evaluation board for the RM9000x2 processor
+	  manufactured by PMC-Sierra.
 
 config QEMU
 	bool "Support for Qemu"
@@ -527,15 +533,16 @@ config QEMU
 	select I8259
 	select ISA
 	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	help
-	 Qemu is a software emulator which among other architectures also
-	 can simulate a MIPS32 4Kc system.  This patch adds support for the
-	 system architecture that currently is being simulated by Qemu.  It
-	 will eventually be removed again when Qemu has the capability to
-	 simulate actual MIPS hardware platforms.  More information on Qemu
-	 can be found at http://www.linux-mips.org/wiki/Qemu.
+	  Qemu is a software emulator which among other architectures also
+	  can simulate a MIPS32 4Kc system.  This patch adds support for the
+	  system architecture that currently is being simulated by Qemu.  It
+	  will eventually be removed again when Qemu has the capability to
+	  simulate actual MIPS hardware platforms.  More information on Qemu
+	  can be found at http://www.linux-mips.org/wiki/Qemu.
 
 config SGI_IP22
 	bool "Support for SGI IP22 (Indy/Indigo2)"
@@ -543,11 +550,15 @@ config SGI_IP22
 	select ARC32
 	select BOOT_ELF32
 	select DMA_NONCOHERENT
+	select HW_HAS_EISA
 	select IP22_CPU_SCACHE
 	select IRQ_CPU
 	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_R4X00
+	select SYS_HAS_CPU_R5000
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
 	help
 	  This are the SGI Indy, Challenge S and Indigo2, as well as certain
 	  OEM variants like the Tandem CMN B006S. To compile a Linux kernel
@@ -557,70 +568,18 @@ config SGI_IP27
 	bool "Support for SGI IP27 (Origin200/2000)"
 	select ARC
 	select ARC64
+	select BOOT_ELF64
 	select DMA_IP27
 	select HW_HAS_PCI
 	select PCI_DOMAINS
+	select SYS_HAS_CPU_R10000
 	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
 	help
 	  This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
 	  workstations.  To compile a Linux kernel that runs on these, say Y
 	  here.
 
-#config SGI_SN0_XXL
-#	bool "IP27 XXL"
-#	depends on SGI_IP27
-#	  This options adds support for userspace processes upto 16TB size.
-#	  Normally the limit is just .5TB.
-
-config SGI_SN0_N_MODE
-	bool "IP27 N-Mode"
-	depends on SGI_IP27
-	help
-	  The nodes of Origin 200, Origin 2000 and Onyx 2 systems can be
-	  configured in either N-Modes which allows for more nodes or M-Mode
-	  which allows for more memory.  Your system is most probably
-	  running in M-Mode, so you should say N here.
-
-config ARCH_DISCONTIGMEM_ENABLE
-	bool
-	default y if SGI_IP27
-	help
-	  Say Y to upport efficient handling of discontiguous physical memory,
-	  for architectures which are either NUMA (Non-Uniform Memory Access)
-	  or have huge holes in the physical address space for other reasons.
-	  See <file:Documentation/vm/numa> for more.
-
-config NUMA
-	bool "NUMA Support"
-	depends on SGI_IP27
-	help
-	  Say Y to compile the kernel to support NUMA (Non-Uniform Memory
-	  Access).  This option is for configuring high-end multiprocessor
-	  server machines.  If in doubt, say N.
-
-config MAPPED_KERNEL
-	bool "Mapped kernel support"
-	depends on SGI_IP27
-	help
-	  Change the way a Linux kernel is loaded into memory on a MIPS64
-	  machine.  This is required in order to support text replication and
-	  NUMA.  If you need to understand it, read the source code.
-
-config REPLICATE_KTEXT
-	bool "Kernel text replication support"
-	depends on SGI_IP27
-	help
-	  Say Y here to enable replicating the kernel text across multiple
-	  nodes in a NUMA cluster.  This trades memory for speed.
-
-config REPLICATE_EXHANDLERS
-	bool "Exception handler replication support"
-	depends on SGI_IP27
-	help
-	  Say Y here to enable replicating the kernel exception handlers
-	  across multiple nodes in a NUMA cluster. This trades memory for
-	  speed.
-
 config SGI_IP32
 	bool "Support for SGI IP32 (O2) (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
@@ -633,353 +592,152 @@ config SGI_IP32
 	select HW_HAS_PCI
 	select R5000_CPU_SCACHE
 	select RM7000_CPU_SCACHE
+	select SYS_HAS_CPU_R5000
+	select SYS_HAS_CPU_R10000 if BROKEN
+	select SYS_HAS_CPU_RM7000
 	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
 	help
 	  If you want this kernel to run on SGI O2 workstation, say Y here.
 
-config SOC_AU1X00
-	bool "Support for AMD/Alchemy Au1X00 SOCs"
-	select SYS_SUPPORTS_32BIT_KERNEL
-
-choice
-	prompt "Au1X00 SOC Type"
-	depends on SOC_AU1X00
-	help
-	  Say Y here to enable support for one of three AMD/Alchemy
-	  SOCs. For additional documentation see www.amd.com.
-
-config SOC_AU1000
-	bool "SOC_AU1000"
-config SOC_AU1100
-	bool "SOC_AU1100"
-config SOC_AU1500
-	bool "SOC_AU1500"
-config SOC_AU1550
-	bool "SOC_AU1550"
-
-endchoice
-
-choice
-	prompt "AMD/Alchemy Au1x00 board support"
-	depends on SOC_AU1X00
-	help
-	  These are evaluation boards built by AMD/Alchemy to
-	  showcase their Au1X00 Internet Edge Processors. The SOC design
-	  is based on the MIPS32 architecture running at 266/400/500MHz
-	  with many integrated peripherals. Further information can be
-	  found at their website, <http://www.amd.com/>. Say Y here if you
-	  wish to build a kernel for this platform.
-
-config MIPS_PB1000
-	bool "PB1000 board"
-	depends on SOC_AU1000
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select SWAP_IO_SPACE
-
-config MIPS_PB1100
-	bool "PB1100 board"
-	depends on SOC_AU1100
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select SWAP_IO_SPACE
-
-config MIPS_PB1500
-	bool "PB1500 board"
-	depends on SOC_AU1500
-	select DMA_COHERENT
-	select HW_HAS_PCI
-
-config MIPS_PB1550
-	bool "PB1550 board"
-	depends on SOC_AU1550
-	select DMA_COHERENT
-	select HW_HAS_PCI
-	select MIPS_DISABLE_OBSOLETE_IDE
-
-config MIPS_DB1000
-	bool "DB1000 board"
-	depends on SOC_AU1000
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-
-config MIPS_DB1100
-	bool "DB1100 board"
-	depends on SOC_AU1100
-	select DMA_NONCOHERENT
-
-config MIPS_DB1500
-	bool "DB1500 board"
-	depends on SOC_AU1500
-	select DMA_COHERENT
-	select HW_HAS_PCI
-	select MIPS_DISABLE_OBSOLETE_IDE
-
-config MIPS_DB1550
-	bool "DB1550 board"
-	depends on SOC_AU1550
-	select HW_HAS_PCI
-	select DMA_COHERENT
-	select MIPS_DISABLE_OBSOLETE_IDE
-
-config MIPS_BOSPORUS
-	bool "Bosporus board"
-	depends on SOC_AU1500
-	select DMA_NONCOHERENT
-
-config MIPS_MIRAGE
-	bool "Mirage board"
-	depends on SOC_AU1500
-	select DMA_NONCOHERENT
-
-config MIPS_XXS1500
-	bool "MyCable XXS1500 board"
-	depends on SOC_AU1500
-	select DMA_NONCOHERENT
-
-config MIPS_MTX1
-	bool "4G Systems MTX-1 board"
-	depends on SOC_AU1500
-	select HW_HAS_PCI
-	select DMA_NONCOHERENT
-
-endchoice
-
-config SIBYTE_SB1xxx_SOC
-	bool "Support for Broadcom BCM1xxx SOCs (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+config SIBYTE_BIGSUR
+	bool "Support for Sibyte BigSur"
 	select BOOT_ELF32
 	select DMA_COHERENT
+	select PCI_DOMAINS
+	select SIBYTE_BCM1x80
 	select SWAP_IO_SPACE
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-
-choice
-	prompt "BCM1xxx SOC-based board"
-	depends on SIBYTE_SB1xxx_SOC
-	default SIBYTE_SWARM
-	help
-	  Enable support for boards based on the SiByte line of SOCs
-	  from Broadcom.  There are configurations for the known
-	  evaluation boards, or you can choose "Other" and add your
-	  own board support code.
+	select SYS_HAS_CPU_SB1
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_SWARM
-	bool "BCM91250A-SWARM"
+	bool "Support for Sibyte BCM91250A-SWARM"
+	select BOOT_ELF32
+	select DMA_COHERENT
 	select SIBYTE_SB1250
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_SB1
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_SENTOSA
-	bool "BCM91250E-Sentosa"
+	bool "Support for Sibyte BCM91250E-Sentosa"
+	depends on EXPERIMENTAL
+	select BOOT_ELF32
+	select DMA_COHERENT
 	select SIBYTE_SB1250
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_SB1
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_RHONE
-	bool "BCM91125E-Rhone"
+	bool "Support for Sibyte BCM91125E-Rhone"
+	depends on EXPERIMENTAL
+	select BOOT_ELF32
+	select DMA_COHERENT
 	select SIBYTE_BCM1125H
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_SB1
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_CARMEL
-	bool "BCM91120x-Carmel"
+	bool "Support for Sibyte BCM91120x-Carmel"
+	depends on EXPERIMENTAL
+	select BOOT_ELF32
+	select DMA_COHERENT
 	select SIBYTE_BCM1120
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_SB1
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_PTSWARM
-	bool "BCM91250PT-PTSWARM"
+	bool "Support for Sibyte BCM91250PT-PTSWARM"
+	depends on EXPERIMENTAL
+	select BOOT_ELF32
+	select DMA_COHERENT
 	select SIBYTE_SB1250
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_SB1
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_LITTLESUR
-	bool "BCM91250C2-LittleSur"
+	bool "Support for Sibyte BCM91250C2-LittleSur"
+	depends on EXPERIMENTAL
+	select BOOT_ELF32
+	select DMA_COHERENT
 	select SIBYTE_SB1250
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_SB1
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_CRHINE
-	bool "BCM91120C-CRhine"
+	bool "Support for Sibyte BCM91120C-CRhine"
+	depends on EXPERIMENTAL
+	select BOOT_ELF32
+	select DMA_COHERENT
 	select SIBYTE_BCM1120
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_SB1
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_CRHONE
-	bool "BCM91125C-CRhone"
-	select SIBYTE_BCM1125
-
-config SIBYTE_UNKNOWN
-	bool "Other"
-
-endchoice
-
-config SIBYTE_BOARD
-	bool
-	depends on SIBYTE_SB1xxx_SOC && !SIBYTE_UNKNOWN
-	default y
-
-choice
-	prompt "BCM1xxx SOC Type"
-	depends on SIBYTE_UNKNOWN
-	default SIBYTE_UNK_BCM1250
-	help
-	  Since you haven't chosen a known evaluation board from
-	  Broadcom, you must explicitly pick the SOC this kernel is
-	  targetted for.
-
-config SIBYTE_UNK_BCM1250
-	bool "BCM1250"
-	select SIBYTE_SB1250
-
-config SIBYTE_UNK_BCM1120
-	bool "BCM1120"
-	select SIBYTE_BCM1120
-
-config SIBYTE_UNK_BCM1125
-	bool "BCM1125"
+	bool "Support for Sibyte BCM91125C-CRhone"
+	depends on EXPERIMENTAL
+	select BOOT_ELF32
+	select DMA_COHERENT
 	select SIBYTE_BCM1125
-
-config SIBYTE_UNK_BCM1125H
-	bool "BCM1125H"
-	select SIBYTE_BCM1125H
-
-endchoice
-
-config SIBYTE_SB1250
-	bool
-	select HW_HAS_PCI
-
-config SIBYTE_BCM1120
-	bool
-	select SIBYTE_BCM112X
-
-config SIBYTE_BCM1125
-	bool
-	select HW_HAS_PCI
-	select SIBYTE_BCM112X
-
-config SIBYTE_BCM1125H
-	bool
-	select HW_HAS_PCI
-	select SIBYTE_BCM112X
-
-config SIBYTE_BCM112X
-	bool
-
-choice
-	prompt "SiByte SOC Stepping"
-	depends on SIBYTE_SB1xxx_SOC
-
-config CPU_SB1_PASS_1
-	bool "1250 Pass1"
-	depends on SIBYTE_SB1250
-	select CPU_HAS_PREFETCH
-
-config CPU_SB1_PASS_2_1250
-	bool "1250 An"
-	depends on SIBYTE_SB1250
-	select CPU_SB1_PASS_2
-	help
-	  Also called BCM1250 Pass 2
-
-config CPU_SB1_PASS_2_2
-	bool "1250 Bn"
-	depends on SIBYTE_SB1250
-	select CPU_HAS_PREFETCH
-	help
-	  Also called BCM1250 Pass 2.2
-
-config CPU_SB1_PASS_4
-	bool "1250 Cn"
-	depends on SIBYTE_SB1250
-	select CPU_HAS_PREFETCH
-	help
-	  Also called BCM1250 Pass 3
-
-config CPU_SB1_PASS_2_112x
-	bool "112x Hybrid"
-	depends on SIBYTE_BCM112X
-	select CPU_SB1_PASS_2
-
-config CPU_SB1_PASS_3
-	bool "112x An"
-	depends on SIBYTE_BCM112X
-	select CPU_HAS_PREFETCH
-
-endchoice
-
-config CPU_SB1_PASS_2
-	bool
-
-config SIBYTE_HAS_LDT
-	bool
-	depends on PCI && (SIBYTE_SB1250 || SIBYTE_BCM1125H)
-	default y
-
-config SIMULATION
-	bool "Running under simulation"
-	depends on SIBYTE_SB1xxx_SOC
-	help
-	  Build a kernel suitable for running under the GDB simulator.
-	  Primarily adjusts the kernel's notion of time.
-
-config SIBYTE_CFE
-	bool "Booting from CFE"
-	depends on SIBYTE_SB1xxx_SOC
-	help
-	  Make use of the CFE API for enumerating available memory,
-	  controlling secondary CPUs, and possibly console output.
-
-config SIBYTE_CFE_CONSOLE
-	bool "Use firmware console"
-	depends on SIBYTE_CFE
-	help
-	  Use the CFE API's console write routines during boot.  Other console
-	  options (VT console, sb1250 duart console, etc.) should not be
-	  configured.
-
-config SIBYTE_STANDALONE
-	bool
-	depends on SIBYTE_SB1xxx_SOC && !SIBYTE_CFE
-	default y
-
-config SIBYTE_STANDALONE_RAM_SIZE
-	int "Memory size (in megabytes)"
-	depends on SIBYTE_STANDALONE
-	default "32"
-
-config SIBYTE_BUS_WATCHER
-	bool "Support for Bus Watcher statistics"
-	depends on SIBYTE_SB1xxx_SOC
-	help
-	  Handle and keep statistics on the bus error interrupts (COR_ECC,
-	  BAD_ECC, IO_BUS).
-
-config SIBYTE_BW_TRACE
-	bool "Capture bus trace before bus error"
-	depends on SIBYTE_BUS_WATCHER
-	help
-	  Run a continuous bus trace, dumping the raw data as soon as
-	  a ZBbus error is detected.  Cannot work if ZBbus profiling
-	  is turned on, and also will interfere with JTAG-based trace
-	  buffer activity.  Raw buffer data is dumped to console, and
-	  must be processed off-line.
-
-config SIBYTE_SB1250_PROF
-	bool "Support for SB1/SOC profiling - SB1/SCD perf counters"
-	depends on SIBYTE_SB1xxx_SOC
-
-config SIBYTE_TBPROF
-	bool "Support for ZBbus profiling"
-	depends on SIBYTE_SB1xxx_SOC
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_SB1
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SNI_RM200_PCI
 	bool "Support for SNI RM200 PCI"
 	select ARC
 	select ARC32
+	select ARCH_MAY_HAVE_PC_FDC
 	select BOOT_ELF32
 	select DMA_NONCOHERENT
 	select GENERIC_ISA_DMA
 	select HAVE_STD_PC_SERIAL_PORT
+	select HW_HAS_EISA
 	select HW_HAS_PCI
 	select I8259
 	select ISA
+	select SYS_HAS_CPU_R4X00
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+	select SYS_SUPPORTS_BIG_ENDIAN if EXPERIMENTAL
+	select SYS_SUPPORTS_HIGHMEM
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
 	  The SNI RM200 PCI was a MIPS-based platform manufactured by Siemens
 	  Nixdorf Informationssysteme (SNI), parent company of Pyramid
 	  Technology and now in turn merged with Fujitsu.  Say Y here to
 	  support this machine type.
 
+config TOSHIBA_JMR3927
+	bool "Support for Toshiba JMR-TX3927 board"
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select MIPS_TX3927
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_TX39XX
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select TOSHIBA_BOARDS
+
 config TOSHIBA_RBTX4927
 	bool "Support for Toshiba TBTX49[23]7 board"
 	select DMA_NONCOHERENT
@@ -988,15 +746,51 @@ config TOSHIBA_RBTX4927
 	select I8259
 	select ISA
 	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_TX49XX
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select TOSHIBA_BOARDS
 	help
 	  This Toshiba board is based on the TX4927 processor. Say Y here to
 	  support this machine type
 
-config TOSHIBA_FPCIB0
-	bool "FPCIB0 Backplane Support"
-	depends on TOSHIBA_RBTX4927
+config TOSHIBA_RBTX4938
+	bool "Support for Toshiba RBTX4938 board"
+	select HAVE_STD_PC_SERIAL_PORT
+	select DMA_NONCOHERENT
+	select GENERIC_ISA_DMA
+	select HAS_TXX9_SERIAL
+	select HW_HAS_PCI
+	select I8259
+	select ISA
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_TX49XX
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select TOSHIBA_BOARDS
+	help
+	  This Toshiba board is based on the TX4938 processor. Say Y here to
+	  support this machine type
+
+endchoice
+
+source "arch/mips/ddb5xxx/Kconfig"
+source "arch/mips/gt64120/ev64120/Kconfig"
+source "arch/mips/jazz/Kconfig"
+source "arch/mips/ite-boards/Kconfig"
+source "arch/mips/lasat/Kconfig"
+source "arch/mips/momentum/Kconfig"
+source "arch/mips/pmc-sierra/Kconfig"
+source "arch/mips/sgi-ip27/Kconfig"
+source "arch/mips/sibyte/Kconfig"
+source "arch/mips/tx4927/Kconfig"
+source "arch/mips/tx4938/Kconfig"
+source "arch/mips/vr41xx/Kconfig"
+source "arch/mips/philips/pnx8550/common/Kconfig"
+
+endmenu
 
 config RWSEM_GENERIC_SPINLOCK
 	bool
@@ -1014,8 +808,9 @@ config GENERIC_CALIBRATE_DELAY
 #
 config ARC
 	bool
-	depends on SNI_RM200_PCI || SGI_IP32 || SGI_IP27 || SGI_IP22 || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61
-	default y
+
+config ARCH_MAY_HAVE_PC_FDC
+	bool
 
 config DMA_COHERENT
 	bool
@@ -1034,51 +829,65 @@ config DMA_NONCOHERENT
 config DMA_NEED_PCI_MAP_STATE
 	bool
 
+config OWN_DMA
+	bool
+
 config EARLY_PRINTK
 	bool
-	depends on MACH_DECSTATION
-	default y
 
 config GENERIC_ISA_DMA
 	bool
-	depends on SNI_RM200_PCI || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61 || MIPS_MALTA
-	default y
 
 config I8259
 	bool
-	depends on SNI_RM200_PCI || DDB5477 || DDB5476 || DDB5074 || MACH_JAZZ || MIPS_MALTA || MIPS_COBALT
-	default y
 
 config LIMITED_DMA
 	bool
 	select HIGHMEM
+	select SYS_SUPPORTS_HIGHMEM
 
 config MIPS_BONITO64
 	bool
-	depends on MIPS_ATLAS || MIPS_MALTA
-	default y
 
 config MIPS_MSC
 	bool
-	depends on MIPS_ATLAS || MIPS_MALTA
-	default y
 
 config MIPS_NILE4
 	bool
-	depends on LASAT
-	default y
 
 config MIPS_DISABLE_OBSOLETE_IDE
 	bool
 
-config CPU_LITTLE_ENDIAN
-	bool "Generate little endian code"
-	default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA
-	default n if MIPS_EV64120 || MIPS_EV96100 || MOMENCO_OCELOT || MOMENCO_OCELOT_G || SGI_IP22 || SGI_IP27 || SGI_IP32 || TOSHIBA_JMR3927
+#
+# Endianess selection.  Suffiently obscure so many users don't know what to
+# answer,so we try hard to limit the available choices.  Also the use of a
+# choice statement should be more obvious to the user.
+#
+choice
+	prompt "Endianess selection"
 	help
 	  Some MIPS machines can be configured for either little or big endian
-	  byte order. These modes require different kernels. Say Y if your
-	  machine is little endian, N if it's a big endian machine.
+	  byte order. These modes require different kernels and a different
+	  Linux distribution.  In general there is one prefered byteorder for a
+	  particular system but some systems are just as commonly used in the
+	  one or the other endianess.
+
+config CPU_BIG_ENDIAN
+	bool "Big endian"
+	depends on SYS_SUPPORTS_BIG_ENDIAN
+
+config CPU_LITTLE_ENDIAN
+	bool "Little endian"
+	depends on SYS_SUPPORTS_LITTLE_ENDIAN
+	help
+
+endchoice
+
+config SYS_SUPPORTS_BIG_ENDIAN
+	bool
+
+config SYS_SUPPORTS_LITTLE_ENDIAN
+	bool
 
 config IRQ_CPU
 	bool
@@ -1086,42 +895,69 @@ config IRQ_CPU
 config IRQ_CPU_RM7K
 	bool
 
+config IRQ_CPU_RM9K
+	bool
+
 config IRQ_MV64340
 	bool
 
 config DDB5XXX_COMMON
 	bool
-	depends on DDB5074 || DDB5476 || DDB5477
-	default y
 
 config MIPS_BOARDS_GEN
 	bool
-	depends on MIPS_ATLAS || MIPS_MALTA || MIPS_SEAD
-	default y
 
 config MIPS_GT64111
 	bool
-	depends on MIPS_COBALT
-	default y
 
 config MIPS_GT64120
 	bool
-	depends on MIPS_EV64120 || MIPS_EV96100 || LASAT || MIPS_ATLAS || MIPS_MALTA || MOMENCO_OCELOT
-	default y
 
 config MIPS_TX3927
 	bool
-	depends on TOSHIBA_JMR3927
 	select HAS_TXX9_SERIAL
-	default y
 
 config PCI_MARVELL
 	bool
 
 config ITE_BOARD_GEN
 	bool
-	depends on MIPS_IVR || MIPS_ITE8172
-	default y
+
+config SOC_AU1000
+	bool
+	select SOC_AU1X00
+
+config SOC_AU1100
+	bool
+	select SOC_AU1X00
+
+config SOC_AU1500
+	bool
+	select SOC_AU1X00
+
+config SOC_AU1550
+	bool
+	select SOC_AU1X00
+
+config SOC_AU1200
+	bool
+	select SOC_AU1X00
+
+config SOC_AU1X00
+	bool
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_32BIT_KERNEL
+
+config PNX8550
+	bool
+	select SOC_PNX8550
+
+config SOC_PNX8550
+	bool
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_32BIT_KERNEL
 
 config SWAP_IO_SPACE
 	bool
@@ -1148,6 +984,9 @@ config SYSCLK_100
 
 endchoice
 
+config ARC32
+	bool
+
 config AU1X00_USB_DEVICE
 	bool
 	depends on MIPS_PB1500 || MIPS_PB1100 || MIPS_PB1000
@@ -1155,11 +994,7 @@ config AU1X00_USB_DEVICE
 
 config MIPS_GT96100
 	bool
-	depends on MIPS_EV96100
-	default y
-	help
-	  Say Y here to support the Galileo Technology GT96100 communications
-	  controller card.  There is a web page at <http://www.galileot.com/>.
+	select MIPS_GT64120
 
 config IT8172_CIR
 	bool
@@ -1173,8 +1008,6 @@ config IT8712
 
 config BOOT_ELF32
 	bool
-	depends on MACH_DECSTATION || MIPS_ATLAS || MIPS_MALTA || MOMENCO_JAGUAR_ATX || MOMENCO_OCELOT_3 || SIBYTE_SB1xxx_SOC || SGI_IP32 || SGI_IP22 || SNI_RM200_PCI
-	default y
 
 config MIPS_L1_CACHE_SHIFT
 	int
@@ -1182,11 +1015,6 @@ config MIPS_L1_CACHE_SHIFT
 	default "7" if SGI_IP27
 	default "5"
 
-config ARC32
-	bool
-	depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32
-	default y
-
 config HAVE_STD_PC_SERIAL_PORT
 	bool
 
@@ -1206,30 +1034,12 @@ config ARC_PROMLIB
 
 config ARC64
 	bool
-	depends on SGI_IP27
-	default y
 
 config BOOT_ELF64
 	bool
-	depends on SGI_IP27
-	default y
-
-#config MAPPED_PCI_IO y
-#	bool
-#	depends on SGI_IP27
-#	default y
-
-config QL_ISP_A64
-	bool
-	depends on SGI_IP27
-	default y
 
 config TOSHIBA_BOARDS
 	bool
-	depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927
-	default y
-
-endmenu
 
 menu "CPU selection"
 
@@ -1237,18 +1047,69 @@ choice
 	prompt "CPU type"
 	default CPU_R4X00
 
-config CPU_MIPS32
-	bool "MIPS32"
+config CPU_MIPS32_R1
+	bool "MIPS32 Release 1"
+	depends on SYS_HAS_CPU_MIPS32_R1
+	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
+	help
+	  Choose this option to build a kernel for release 1 or later of the
+	  MIPS32 architecture.  Most modern embedded systems with a 32-bit
+	  MIPS processor are based on a MIPS32 processor.  If you know the
+	  specific type of processor in your system, choose those that one
+	  otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
+	  Release 2 of the MIPS32 architecture is available since several
+	  years so chances are you even have a MIPS32 Release 2 processor
+	  in which case you should choose CPU_MIPS32_R2 instead for better
+	  performance.
+
+config CPU_MIPS32_R2
+	bool "MIPS32 Release 2"
+	depends on SYS_HAS_CPU_MIPS32_R2
+	select CPU_HAS_PREFETCH
+	select CPU_SUPPORTS_32BIT_KERNEL
+	help
+	  Choose this option to build a kernel for release 2 or later of the
+	  MIPS32 architecture.  Most modern embedded systems with a 32-bit
+	  MIPS processor are based on a MIPS32 processor.  If you know the
+	  specific type of processor in your system, choose those that one
+	  otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
 
-config CPU_MIPS64
-	bool "MIPS64"
+config CPU_MIPS64_R1
+	bool "MIPS64 Release 1"
+	depends on SYS_HAS_CPU_MIPS64_R1
+	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
+	help
+	  Choose this option to build a kernel for release 1 or later of the
+	  MIPS64 architecture.  Many modern embedded systems with a 64-bit
+	  MIPS processor are based on a MIPS64 processor.  If you know the
+	  specific type of processor in your system, choose those that one
+	  otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
+	  Release 2 of the MIPS64 architecture is available since several
+	  years so chances are you even have a MIPS64 Release 2 processor
+	  in which case you should choose CPU_MIPS64_R2 instead for better
+	  performance.
+
+config CPU_MIPS64_R2
+	bool "MIPS64 Release 2"
+	depends on SYS_HAS_CPU_MIPS64_R2
+	select CPU_HAS_PREFETCH
+	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_SUPPORTS_64BIT_KERNEL
+	help
+	  Choose this option to build a kernel for release 2 or later of the
+	  MIPS64 architecture.  Many modern embedded systems with a 64-bit
+	  MIPS processor are based on a MIPS64 processor.  If you know the
+	  specific type of processor in your system, choose those that one
+	  otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
 
 config CPU_R3000
 	bool "R3000"
+	depends on SYS_HAS_CPU_R3000
 	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
 	help
 	  Please make sure to pick the right CPU type. Linux/MIPS is not
 	  designed to be generic, i.e. Kernels compiled for R3000 CPUs will
@@ -1259,20 +1120,23 @@ config CPU_R3000
 
 config CPU_TX39XX
 	bool "R39XX"
+	depends on SYS_HAS_CPU_TX39XX
 	select CPU_SUPPORTS_32BIT_KERNEL
 
 config CPU_VR41XX
 	bool "R41xx"
+	depends on SYS_HAS_CPU_VR41XX
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	help
-	  The options selects support for the NEC VR41xx series of processors.
+	  The options selects support for the NEC VR4100 series of processors.
 	  Only choose this option if you have one of these processors as a
 	  kernel built with this option will not run on any other type of
 	  processor or vice versa.
 
 config CPU_R4300
 	bool "R4300"
+	depends on SYS_HAS_CPU_R4300
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	help
@@ -1280,6 +1144,7 @@ config CPU_R4300
 
 config CPU_R4X00
 	bool "R4x00"
+	depends on SYS_HAS_CPU_R4X00
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	help
@@ -1288,11 +1153,13 @@ config CPU_R4X00
 
 config CPU_TX49XX
 	bool "R49XX"
+	depends on SYS_HAS_CPU_TX49XX
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 
 config CPU_R5000
 	bool "R5000"
+	depends on SYS_HAS_CPU_R5000
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	help
@@ -1300,10 +1167,14 @@ config CPU_R5000
 
 config CPU_R5432
 	bool "R5432"
+	depends on SYS_HAS_CPU_R5432
+	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_SUPPORTS_64BIT_KERNEL
 
 config CPU_R6000
 	bool "R6000"
 	depends on EXPERIMENTAL
+	depends on SYS_HAS_CPU_R6000
 	select CPU_SUPPORTS_32BIT_KERNEL
 	help
 	  MIPS Technologies R6000 and R6000A series processors.  Note these
@@ -1311,6 +1182,7 @@ config CPU_R6000
 
 config CPU_NEVADA
 	bool "RM52xx"
+	depends on SYS_HAS_CPU_NEVADA
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	help
@@ -1319,6 +1191,8 @@ config CPU_NEVADA
 config CPU_R8000
 	bool "R8000"
 	depends on EXPERIMENTAL
+	depends on SYS_HAS_CPU_R8000
+	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_64BIT_KERNEL
 	help
 	  MIPS Technologies R8000 processors.  Note these processors are
@@ -1326,25 +1200,151 @@ config CPU_R8000
 
 config CPU_R10000
 	bool "R10000"
+	depends on SYS_HAS_CPU_R10000
+	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
 	help
 	  MIPS Technologies R10000-series processors.
 
 config CPU_RM7000
 	bool "RM7000"
+	depends on SYS_HAS_CPU_RM7000
+	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
 
 config CPU_RM9000
 	bool "RM9000"
+	depends on SYS_HAS_CPU_RM9000
+	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
 
 config CPU_SB1
 	bool "SB1"
+	depends on SYS_HAS_CPU_SB1
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
+
+endchoice
+
+config SYS_HAS_CPU_MIPS32_R1
+	bool
+
+config SYS_HAS_CPU_MIPS32_R2
+	bool
+
+config SYS_HAS_CPU_MIPS64_R1
+	bool
+
+config SYS_HAS_CPU_MIPS64_R2
+	bool
+
+config SYS_HAS_CPU_R3000
+	bool
+
+config SYS_HAS_CPU_TX39XX
+	bool
+
+config SYS_HAS_CPU_VR41XX
+	bool
+
+config SYS_HAS_CPU_R4300
+	bool
+
+config SYS_HAS_CPU_R4X00
+	bool
+
+config SYS_HAS_CPU_TX49XX
+	bool
+
+config SYS_HAS_CPU_R5000
+	bool
+
+config SYS_HAS_CPU_R5432
+	bool
+
+config SYS_HAS_CPU_R6000
+	bool
+
+config SYS_HAS_CPU_NEVADA
+	bool
+
+config SYS_HAS_CPU_R8000
+	bool
+
+config SYS_HAS_CPU_R10000
+	bool
+
+config SYS_HAS_CPU_RM7000
+	bool
+
+config SYS_HAS_CPU_RM9000
+	bool
+
+config SYS_HAS_CPU_SB1
+	bool
+
+endmenu
+
+#
+# These two indicate any levelof the MIPS32 and MIPS64 architecture
+#
+config CPU_MIPS32
+	bool
+	default y if CPU_MIPS32_R1 || CPU_MIPS32_R2
+
+config CPU_MIPS64
+	bool
+	default y if CPU_MIPS64_R1 || CPU_MIPS64_R2
+
+#
+# These two indicate the revision of the architecture, either 32 bot 64 bit.
+#
+config CPU_MIPSR1
+	bool
+	default y if CPU_MIPS32_R1 || CPU_MIPS64_R1
+
+config CPU_MIPSR2
+	bool
+	default y if CPU_MIPS32_R2 || CPU_MIPS64_R2
+
+config SYS_SUPPORTS_32BIT_KERNEL
+	bool
+config SYS_SUPPORTS_64BIT_KERNEL
+	bool
+config CPU_SUPPORTS_32BIT_KERNEL
+	bool
+config CPU_SUPPORTS_64BIT_KERNEL
+	bool
+
+menu "Kernel type"
+
+choice
+
+	prompt "Kernel code model"
+	help
+	  You should only select this option if you have a workload that
+	  actually benefits from 64-bit processing or if your machine has
+	  large memory.  You will only be presented a single option in this
+	  menu if your system does not support both 32-bit and 64-bit kernels.
+
+config 32BIT
+	bool "32-bit kernel"
+	depends on CPU_SUPPORTS_32BIT_KERNEL && SYS_SUPPORTS_32BIT_KERNEL
+	select TRAD_SIGNALS
+	help
+	  Select this option if you want to build a 32-bit kernel.
+config 64BIT
+	bool "64-bit kernel"
+	depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL
+	help
+	  Select this option if you want to build a 64-bit kernel.
 
 endchoice
 
@@ -1416,12 +1416,43 @@ config SIBYTE_DMA_PAGEOPS
 	  SiByte Linux port.  Seems to give a small performance benefit.
 
 config CPU_HAS_PREFETCH
-	bool "Enable prefetches" if CPU_SB1 && !CPU_SB1_PASS_2
-	default y if CPU_MIPS32 || CPU_MIPS64 || CPU_RM7000 || CPU_RM9000 || CPU_R10000
+	bool
+
+config MIPS_MT
+	bool "Enable MIPS MT"
+
+choice
+	prompt "MIPS MT options"
+	depends on MIPS_MT
 
-config VTAG_ICACHE
-	bool "Support for Virtual Tagged I-cache" if CPU_MIPS64 || CPU_MIPS32
-	default y if CPU_SB1
+config MIPS_MT_SMP
+	bool "Use 1 TC on each available VPE for SMP"
+	select SMP
+
+config MIPS_VPE_LOADER
+	bool "VPE loader support."
+	depends on MIPS_MT
+	help
+	  Includes a loader for loading an elf relocatable object
+	  onto another VPE and running it.
+
+endchoice
+
+config MIPS_VPE_LOADER_TOM
+	bool "Load VPE program into memory hidden from linux"
+	depends on MIPS_VPE_LOADER
+	default y
+	help
+	  The loader can use memory that is present but has been hidden from
+	  Linux using the kernel command line option "mem=xxMB". It's up to
+	  you to ensure the amount you put in the option and the space your
+	  program requires is less or equal to the amount physically present.
+
+# this should possibly be in drivers/char, but it is rather cpu related. Hmmm
+config MIPS_VPE_APSP_API
+	bool "Enable support for AP/SP API (RTLX)"
+	depends on MIPS_VPE_LOADER
+	help
 
 config SB1_PASS_1_WORKAROUNDS
 	bool
@@ -1440,7 +1471,7 @@ config SB1_PASS_2_1_WORKAROUNDS
 
 config 64BIT_PHYS_ADDR
 	bool "Support for 64-bit physical address space"
-	depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32 || CPU_MIPS64) && 32BIT
+	depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32_R1 || CPU_MIPS64_R1) && 32BIT
 
 config CPU_ADVANCED
 	bool "Override CPU Options"
@@ -1463,7 +1494,7 @@ config CPU_HAS_LLSC
 
 config CPU_HAS_LLDSCD
 	bool "lld/scd Instructions available" if CPU_ADVANCED
-	default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX && !CPU_MIPS32
+	default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX && !CPU_MIPS32_R1
 	help
 	  Say Y here if your CPU has the lld and scd instructions, the 64-bit
 	  equivalents of ll and sc.  Say Y here for better performance, N if
@@ -1477,12 +1508,52 @@ config CPU_HAS_WB
 	  machines which require flushing of write buffers in software.  Saying
 	  Y is the safe option; N may result in kernel malfunction and crashes.
 
+menu "MIPSR2 Interrupt handling"
+	depends on CPU_MIPSR2 && CPU_ADVANCED
+
+config CPU_MIPSR2_IRQ_VI
+	bool "Vectored interrupt mode"
+	help
+	   Vectored interrupt mode allowing faster dispatching of interrupts.
+	   The board support code needs to be written to take advantage of this
+	   mode.  Compatibility code is included to allow the kernel to run on
+	   a CPU that does not support vectored interrupts.  It's safe to
+	   say Y here.
+
+config CPU_MIPSR2_IRQ_EI
+	bool "External interrupt controller mode"
+	help
+	   Extended interrupt mode takes advantage of an external interrupt
+	   controller to allow fast dispatching from many possible interrupt
+	   sources. Say N unless you know that external interrupt support is
+	   required.
+
+config CPU_MIPSR2_SRS
+	bool "Make shadow set registers available for interrupt handlers"
+	depends on CPU_MIPSR2_IRQ_VI || CPU_MIPSR2_IRQ_EI
+	help
+	   Allow the kernel to use shadow register sets for fast interrupts.
+	   Interrupt handlers must be specially written to use shadow sets.
+	   Say N unless you know that shadow register set upport is needed.
+endmenu
+
 config CPU_HAS_SYNC
 	bool
 	depends on !CPU_R3000
 	default y
 
 #
+# Use the generic interrupt handling code in kernel/irq/:
+#
+config GENERIC_HARDIRQS
+	bool
+	default y
+
+config GENERIC_IRQ_PROBE
+	bool
+	default y
+
+#
 # - Highmem only makes sense for the 32-bit kernel.
 # - The current highmem code will only work properly on physically indexed
 #   caches such as R3000, SB1, R7000 or those that look like they're virtually
@@ -1491,14 +1562,19 @@ config CPU_HAS_SYNC
 #   where it's known to be safe.  This will not offer highmem on a few systems
 #   such as MIPS32 and MIPS64 CPUs which may have virtual and physically
 #   indexed CPUs but we're playing safe.
-# - We should not offer highmem for system of which we already know that they
-#   don't have memory configurations that could gain from highmem support in
-#   the kernel because they don't support configurations with RAM at physical
-#   addresses > 0x20000000.
+# - We use SYS_SUPPORTS_HIGHMEM to offer highmem only for systems where we
+#   know they might have memory configurations that could make use of highmem
+#   support.
 #
 config HIGHMEM
 	bool "High Memory Support"
-	depends on 32BIT && (CPU_R3000 || CPU_SB1 || CPU_R7000 || CPU_RM9000 || CPU_R10000) && !(MACH_DECSTATION || MOMENCO_JAGUAR_ATX)
+	depends on 32BIT && CPU_SUPPORTS_HIGHMEM && SYS_SUPPORTS_HIGHMEM
+
+config CPU_SUPPORTS_HIGHMEM
+	bool
+
+config SYS_SUPPORTS_HIGHMEM
+	bool
 
 config ARCH_FLATMEM_ENABLE
 	def_bool y
@@ -1508,7 +1584,7 @@ source "mm/Kconfig"
 
 config SMP
 	bool "Multi-Processing support"
-	depends on CPU_RM9000 || (SIBYTE_SB1250 && !SIBYTE_STANDALONE) || SGI_IP27
+	depends on CPU_RM9000 || ((SIBYTE_BCM1x80 || SIBYTE_BCM1x55 || SIBYTE_SB1250) && !SIBYTE_STANDALONE) || SGI_IP27 || MIPS_MT_SMP
 	---help---
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -1543,14 +1619,7 @@ config NR_CPUS
 	  This is purely to save memory - each supported CPU adds
 	  approximately eight kilobytes to the kernel image.
 
-config PREEMPT
-	bool "Preemptible Kernel"
-	help
-	  This option reduces the latency of the kernel when reacting to
-	  real-time or interactive events by allowing a low priority process to
-	  be preempted even if it is in kernel mode executing a system call.
-	  This allows applications to run more reliably even when the system is
-	  under load.
+source "kernel/Kconfig.preempt"
 
 config RTC_DS1742
 	bool "DS1742 BRAM/RTC support"
@@ -1566,14 +1635,18 @@ config MIPS_INSANE_LARGE
 	  This will result in additional memory usage, so it is not
 	  recommended for normal users.
 
+endmenu
+
 config RWSEM_GENERIC_SPINLOCK
 	bool
 	default y
 
-endmenu
+source "init/Kconfig"
 
 menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
 
+config HW_HAS_EISA
+	bool
 config HW_HAS_PCI
 	bool
 
@@ -1607,7 +1680,7 @@ config ISA
 
 config EISA
 	bool "EISA support"
-	depends on SGI_IP22 || SNI_RM200_PCI
+	depends on HW_HAS_EISA
 	select ISA
 	---help---
 	  The Extended Industry Standard Architecture (EISA) bus was
@@ -1641,12 +1714,6 @@ config MMU
 	bool
 	default y
 
-config MCA
-	bool
-
-config SBUS
-	bool
-
 source "drivers/pcmcia/Kconfig"
 
 source "drivers/pci/hotplug/Kconfig"
@@ -1659,7 +1726,6 @@ source "fs/Kconfig.binfmt"
 
 config TRAD_SIGNALS
 	bool
-	default y if 32BIT
 
 config BUILD_ELF64
 	bool "Use 64-bit ELF format for building"
@@ -1678,7 +1744,7 @@ config BUILD_ELF64
 
 config BINFMT_IRIX
 	bool "Include IRIX binary compatibility"
-	depends on !CPU_LITTLE_ENDIAN && 32BIT && BROKEN
+	depends on CPU_BIG_ENDIAN && 32BIT && BROKEN
 
 config MIPS32_COMPAT
 	bool "Kernel support for Linux/MIPS 32-bit binary compatibility"
@@ -1718,9 +1784,26 @@ config BINFMT_ELF32
 	bool
 	default y if MIPS32_O32 || MIPS32_N32
 
+config SECCOMP
+	bool "Enable seccomp to safely compute untrusted bytecode"
+	depends on PROC_FS && BROKEN
+	default y
+	help
+	  This kernel feature is useful for number crunching applications
+	  that may need to compute untrusted bytecode during their
+	  execution. By using pipes or other transports made available to
+	  the process as file descriptors supporting the read/write
+	  syscalls, it's possible to isolate those applications in
+	  their own address space using seccomp. Once seccomp is
+	  enabled via /proc/<pid>/seccomp, it cannot be disabled
+	  and the task is only allowed to execute a few safe syscalls
+	  defined by each seccomp mode.
+
+	  If unsure, say Y. Only embedded should say N here.
+
 config PM
 	bool "Power Management support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && MACH_AU1X00
+	depends on EXPERIMENTAL && SOC_AU1X00
 
 endmenu
 
@@ -1730,6 +1813,8 @@ source "drivers/Kconfig"
 
 source "fs/Kconfig"
 
+source "arch/mips/oprofile/Kconfig"
+
 source "arch/mips/Kconfig.debug"
 
 source "security/Kconfig"
@@ -1737,18 +1822,3 @@ source "security/Kconfig"
 source "crypto/Kconfig"
 
 source "lib/Kconfig"
-
-#
-# Use the generic interrupt handling code in kernel/irq/:
-#
-config GENERIC_HARDIRQS
-	bool
-	default y
-
-config GENERIC_IRQ_PROBE
-	bool
-	default y
-
-config ISA_DMA_API
-	bool
-	default y
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 346e803f153b..e14ba5e01a36 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -52,6 +52,21 @@ ifdef CONFIG_CROSSCOMPILE
 CROSS_COMPILE		:= $(tool-prefix)
 endif
 
+CHECKFLAGS-y				+= -D__linux__ -D__mips__ \
+					   -D_ABIO32=1 \
+					   -D_ABIN32=2 \
+					   -D_ABI64=3
+CHECKFLAGS-$(CONFIG_32BIT)		+= -D_MIPS_SIM=_ABIO32 \
+					   -D_MIPS_SZLONG=32 \
+					   -D__PTRDIFF_TYPE__=int
+CHECKFLAGS-$(CONFIG_64BIT)		+= -m64 -D_MIPS_SIM=_ABI64 \
+					   -D_MIPS_SZLONG=64 \
+					   -D__PTRDIFF_TYPE__="long int"
+CHECKFLAGS-$(CONFIG_CPU_BIG_ENDIAN)	+= -D__MIPSEB__
+CHECKFLAGS-$(CONFIG_CPU_LITTLE_ENDIAN)	+= -D__MIPSEL__
+
+CHECKFLAGS				= $(CHECKFLAGS-y)
+
 ifdef CONFIG_BUILD_ELF64
 gas-abi			= 64
 ld-emul			= $(64bit-emul)
@@ -79,9 +94,18 @@ endif
 cflags-y			+= -I $(TOPDIR)/include/asm/gcc
 cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe
 cflags-y			+= $(call cc-option, -finline-limit=100000)
-LDFLAGS_vmlinux			+= -G 0 -static -n
+LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
 MODFLAGS			+= -mlong-calls
 
+#
+# We explicitly add the endianness specifier if needed, this allows
+# to compile kernels with a toolchain for the other endianness. We
+# carefully avoid to add it redundantly because gcc 3.3/3.4 complains
+# when fed the toolchain default!
+#
+cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB)
+cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL)
+
 cflags-$(CONFIG_SB1XXX_CORELIS)	+= -mno-sched-prolog -fno-omit-frame-pointer
 
 #
@@ -167,14 +191,22 @@ cflags-$(CONFIG_CPU_TX49XX)	+= \
 			$(call set_gccflags,r4600,mips3,r4600,mips3,mips2)  \
 			-Wa,--trap
 
-cflags-$(CONFIG_CPU_MIPS32)	+= \
+cflags-$(CONFIG_CPU_MIPS32_R1)	+= \
 			$(call set_gccflags,mips32,mips32,r4600,mips3,mips2) \
 			-Wa,--trap
 
-cflags-$(CONFIG_CPU_MIPS64)	+= \
+cflags-$(CONFIG_CPU_MIPS32_R2)	+= \
+			$(call set_gccflags,mips32r2,mips32r2,r4600,mips3,mips2) \
+			-Wa,--trap
+
+cflags-$(CONFIG_CPU_MIPS64_R1)	+= \
 			$(call set_gccflags,mips64,mips64,r4600,mips3,mips2) \
 			-Wa,--trap
 
+cflags-$(CONFIG_CPU_MIPS64_R2)	+= \
+			$(call set_gccflags,mips64r2,mips64r2,r4600,mips3,mips2) \
+			-Wa,--trap
+
 cflags-$(CONFIG_CPU_R5000)	+= \
 			$(call set_gccflags,r5000,mips4,r5000,mips4,mips2) \
 			-Wa,--trap
@@ -196,6 +228,7 @@ cflags-$(CONFIG_CPU_RM9000)	+= \
 			$(call set_gccflags,rm9000,mips4,r5000,mips4,mips2) \
 			-Wa,--trap
 
+
 cflags-$(CONFIG_CPU_SB1)	+= \
 			$(call set_gccflags,sb1,mips64,r5000,mips4,mips2) \
 			-Wa,--trap
@@ -266,6 +299,13 @@ cflags-$(CONFIG_MIPS_PB1550)	+= -Iinclude/asm-mips/mach-pb1x00
 load-$(CONFIG_MIPS_PB1550)	+= 0xffffffff80100000
 
 #
+# AMD Alchemy Pb1200 eval board
+#
+libs-$(CONFIG_MIPS_PB1200)	+= arch/mips/au1000/pb1200/
+cflags-$(CONFIG_MIPS_PB1200)	+= -Iinclude/asm-mips/mach-pb1x00
+load-$(CONFIG_MIPS_PB1200)	+= 0xffffffff80100000
+
+#
 # AMD Alchemy Db1000 eval board
 #
 libs-$(CONFIG_MIPS_DB1000)	+= arch/mips/au1000/db1x00/
@@ -294,6 +334,13 @@ cflags-$(CONFIG_MIPS_DB1550)	+= -Iinclude/asm-mips/mach-db1x00
 load-$(CONFIG_MIPS_DB1550)	+= 0xffffffff80100000
 
 #
+# AMD Alchemy Db1200 eval board
+#
+libs-$(CONFIG_MIPS_DB1200)	+= arch/mips/au1000/pb1200/
+cflags-$(CONFIG_MIPS_DB1200)	+= -Iinclude/asm-mips/mach-db1x00
+load-$(CONFIG_MIPS_DB1200)	+= 0xffffffff80100000
+
+#
 # AMD Alchemy Bosporus eval board
 #
 libs-$(CONFIG_MIPS_BOSPORUS)	+= arch/mips/au1000/db1x00/
@@ -323,6 +370,7 @@ load-$(CONFIG_MIPS_XXS1500)	+= 0xffffffff80100000
 # Cobalt Server
 #
 core-$(CONFIG_MIPS_COBALT)	+= arch/mips/cobalt/
+cflags-$(CONFIG_MIPS_COBALT)	+= -Iinclude/asm-mips/cobalt
 load-$(CONFIG_MIPS_COBALT)	+= 0xffffffff80080000
 
 #
@@ -389,6 +437,13 @@ core-$(CONFIG_MIPS_SEAD)	+= arch/mips/mips-boards/sead/
 load-$(CONFIG_MIPS_SEAD)	+= 0xffffffff80100000
 
 #
+# MIPS SIM
+#
+core-$(CONFIG_MIPS_SIM)		+= arch/mips/mips-boards/sim/
+cflags-$(CONFIG_MIPS_SIM)	+= -Iinclude/asm-mips/mach-sim
+load-$(CONFIG_MIPS_SIM)		+= 0x80100000
+
+#
 # Momentum Ocelot board
 #
 # The Ocelot setup.o must be linked early - it does the ioremap() for the
@@ -514,6 +569,19 @@ load-$(CONFIG_CASIO_E55)	+= 0xffffffff80004000
 load-$(CONFIG_TANBAC_TB022X)	+= 0xffffffff80000000
 
 #
+# Common Philips PNX8550
+#
+core-$(CONFIG_SOC_PNX8550)	+= arch/mips/philips/pnx8550/common/
+cflags-$(CONFIG_SOC_PNX8550)	+= -Iinclude/asm-mips/mach-pnx8550
+
+#
+# Philips PNX8550 JBS board
+#
+libs-$(CONFIG_PNX8550_JBS)	+= arch/mips/philips/pnx8550/jbs/
+#cflags-$(CONFIG_PNX8550_JBS)	+= -Iinclude/asm-mips/mach-pnx8550
+load-$(CONFIG_PNX8550_JBS)	+= 0xffffffff80060000
+
+#
 # SGI IP22 (Indy/Indigo2)
 #
 # Set the load address to >= 0xffffffff88069000 if you want to leave space for
@@ -582,10 +650,20 @@ load-$(CONFIG_SGI_IP32)		+= 0xffffffff80004000
 # removed (as happens, even if they have __initcall/module_init)
 #
 core-$(CONFIG_SIBYTE_BCM112X)	+= arch/mips/sibyte/sb1250/
-cflags-$(CONFIG_SIBYTE_BCM112X)	+= -Iinclude/asm-mips/mach-sibyte
+cflags-$(CONFIG_SIBYTE_BCM112X)	+= -Iinclude/asm-mips/mach-sibyte \
+			-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
 
 core-$(CONFIG_SIBYTE_SB1250)	+= arch/mips/sibyte/sb1250/
-cflags-$(CONFIG_SIBYTE_SB1250)	+= -Iinclude/asm-mips/mach-sibyte
+cflags-$(CONFIG_SIBYTE_SB1250)	+= -Iinclude/asm-mips/mach-sibyte \
+			-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
+
+core-$(CONFIG_SIBYTE_BCM1x55)	+= arch/mips/sibyte/bcm1480/
+cflags-$(CONFIG_SIBYTE_BCM1x55)	+= -Iinclude/asm-mips/mach-sibyte \
+			-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
+
+core-$(CONFIG_SIBYTE_BCM1x80)	+= arch/mips/sibyte/bcm1480/
+cflags-$(CONFIG_SIBYTE_BCM1x80)	+= -Iinclude/asm-mips/mach-sibyte \
+			-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
 
 #
 # Sibyte BCM91120x (Carmel) board
@@ -593,6 +671,7 @@ cflags-$(CONFIG_SIBYTE_SB1250)	+= -Iinclude/asm-mips/mach-sibyte
 # Sibyte BCM91125C (CRhone) board
 # Sibyte BCM91125E (Rhone) board
 # Sibyte SWARM board
+# Sibyte BCM91x80 (BigSur) board
 #
 libs-$(CONFIG_SIBYTE_CARMEL)	+= arch/mips/sibyte/swarm/
 load-$(CONFIG_SIBYTE_CARMEL)	:= 0xffffffff80100000
@@ -606,6 +685,8 @@ libs-$(CONFIG_SIBYTE_SENTOSA)	+= arch/mips/sibyte/swarm/
 load-$(CONFIG_SIBYTE_SENTOSA)	:= 0xffffffff80100000
 libs-$(CONFIG_SIBYTE_SWARM)	+= arch/mips/sibyte/swarm/
 load-$(CONFIG_SIBYTE_SWARM)	:= 0xffffffff80100000
+libs-$(CONFIG_SIBYTE_BIGSUR)	+= arch/mips/sibyte/swarm/
+load-$(CONFIG_SIBYTE_BIGSUR)	:= 0xffffffff80100000
 
 #
 # SNI RM200 PCI
@@ -619,6 +700,7 @@ load-$(CONFIG_SNI_RM200_PCI)	+= 0xffffffff80600000
 #
 core-$(CONFIG_TOSHIBA_JMR3927)	+= arch/mips/jmr3927/rbhma3100/ \
 				   arch/mips/jmr3927/common/
+cflags-$(CONFIG_TOSHIBA_JMR3927) += -Iinclude/asm-mips/mach-jmr3927
 load-$(CONFIG_TOSHIBA_JMR3927)	+= 0xffffffff80050000
 
 #
@@ -629,6 +711,13 @@ core-$(CONFIG_TOSHIBA_RBTX4927)	+= arch/mips/tx4927/toshiba_rbtx4927/
 core-$(CONFIG_TOSHIBA_RBTX4927)	+= arch/mips/tx4927/common/
 load-$(CONFIG_TOSHIBA_RBTX4927)	+= 0xffffffff80020000
 
+#
+# Toshiba RBTX4938 board
+#
+core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/toshiba_rbtx4938/
+core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/common/
+load-$(CONFIG_TOSHIBA_RBTX4938) += 0xffffffff80100000
+
 cflags-y			+= -Iinclude/asm-mips/mach-generic
 drivers-$(CONFIG_PCI)		+= arch/mips/pci/
 
@@ -701,10 +790,29 @@ ifdef CONFIG_BOOT_ELF64
 all:	$(vmlinux-64)
 endif
 
+ifdef CONFIG_MIPS_ATLAS
+all:	vmlinux.srec
+endif
+
+ifdef CONFIG_MIPS_MALTA
+all:	vmlinux.srec
+endif
+
+ifdef CONFIG_MIPS_SEAD
+all:	vmlinux.srec
+endif
+
+ifdef CONFIG_QEMU
+all:	vmlinux.bin
+endif
+
 ifdef CONFIG_SNI_RM200_PCI
 all:	vmlinux.ecoff
 endif
 
+vmlinux.bin: $(vmlinux-32)
+	+@$(call makeboot,$@)
+
 vmlinux.ecoff vmlinux.rm200: $(vmlinux-32)
 	+@$(call makeboot,$@)
 
@@ -720,7 +828,6 @@ archclean:
 	@$(MAKE) $(clean)=arch/mips/boot
 	@$(MAKE) $(clean)=arch/mips/lasat
 
-
 CLEAN_FILES += vmlinux.32 \
 	       vmlinux.64 \
 	       vmlinux.ecoff
diff --git a/arch/mips/arc/Makefile b/arch/mips/arc/Makefile
index e8424932e1a3..4f349ec1ea2d 100644
--- a/arch/mips/arc/Makefile
+++ b/arch/mips/arc/Makefile
@@ -3,7 +3,7 @@
 #
 
 lib-y				+= cmdline.o env.o file.o identify.o init.o \
-				   misc.o time.o tree.o
+				   misc.o salone.o time.o tree.o
 
 lib-$(CONFIG_ARC_MEMORY)	+= memory.o
 lib-$(CONFIG_ARC_CONSOLE)	+= arc_con.o
diff --git a/arch/mips/arc/identify.c b/arch/mips/arc/identify.c
index 0dd7a345eb79..1bd6199e174a 100644
--- a/arch/mips/arc/identify.c
+++ b/arch/mips/arc/identify.c
@@ -44,6 +44,11 @@ static struct smatch mach_table[] = {
 		MACH_GROUP_SGI,
 		MACH_SGI_IP28,
 		PROM_FLAG_ARCS
+	}, {	"SGI-IP30",
+		"SGI Octane",
+		MACH_GROUP_SGI,
+		MACH_SGI_IP30,
+		PROM_FLAG_ARCS
 	}, {	"SGI-IP32",
 		"SGI O2",
 		MACH_GROUP_SGI,
diff --git a/arch/mips/au1000/common/Makefile b/arch/mips/au1000/common/Makefile
index 594b75e5e080..a1edfd1f643c 100644
--- a/arch/mips/au1000/common/Makefile
+++ b/arch/mips/au1000/common/Makefile
@@ -8,7 +8,7 @@
 
 obj-y += prom.o int-handler.o irq.o puts.o time.o reset.o \
 	au1xxx_irqmap.o clocks.o platform.o power.o setup.o \
-	sleeper.o cputable.o dma.o dbdma.o
+	sleeper.o cputable.o dma.o dbdma.o gpio.o
 
 obj-$(CONFIG_AU1X00_USB_DEVICE)	+= usbdev.o
 obj-$(CONFIG_KGDB)		+= dbg_io.o
diff --git a/arch/mips/au1000/common/au1xxx_irqmap.c b/arch/mips/au1000/common/au1xxx_irqmap.c
index 8a0f39f67c59..0b2c03c52319 100644
--- a/arch/mips/au1000/common/au1xxx_irqmap.c
+++ b/arch/mips/au1000/common/au1xxx_irqmap.c
@@ -173,14 +173,14 @@ au1xxx_irq_map_t au1xxx_ic0_map[] = {
 	{ AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0},
 	{ AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0},
 	{ AU1550_PSC3_INT, INTC_INT_HIGH_LEVEL, 0},
-	{ AU1550_TOY_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1550_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1550_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1550_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
-	{ AU1550_RTC_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1550_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1550_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1550_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
+	{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
 	{ AU1550_NAND_INT, INTC_INT_RISE_EDGE, 0},
 	{ AU1550_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
 	{ AU1550_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
@@ -201,14 +201,14 @@ au1xxx_irq_map_t au1xxx_ic0_map[] = {
 	{ AU1200_PSC1_INT, INTC_INT_HIGH_LEVEL, 0},
 	{ AU1200_AES_INT, INTC_INT_HIGH_LEVEL, 0},
 	{ AU1200_CAMERA_INT, INTC_INT_HIGH_LEVEL, 0},
-	{ AU1200_TOY_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1200_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1200_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1200_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
-	{ AU1200_RTC_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1200_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1200_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1200_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
+	{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
 	{ AU1200_NAND_INT, INTC_INT_RISE_EDGE, 0},
 	{ AU1200_USB_INT, INTC_INT_HIGH_LEVEL, 0 },
 	{ AU1200_LCD_INT, INTC_INT_HIGH_LEVEL, 0},
diff --git a/arch/mips/au1000/common/cputable.c b/arch/mips/au1000/common/cputable.c
index f5521dfccfd6..4dbde82c8215 100644
--- a/arch/mips/au1000/common/cputable.c
+++ b/arch/mips/au1000/common/cputable.c
@@ -37,7 +37,8 @@ struct cpu_spec	cpu_specs[] = {
     { 0xffffffff, 0x02030203, "Au1100 BD", 0, 1 },
     { 0xffffffff, 0x02030204, "Au1100 BE", 0, 1 },
     { 0xffffffff, 0x03030200, "Au1550 AA", 0, 1 },
-    { 0xffffffff, 0x04030200, "Au1200 AA", 0, 1 },
+    { 0xffffffff, 0x04030200, "Au1200 AB", 0, 0 },
+    { 0xffffffff, 0x04030201, "Au1200 AC", 0, 1 },
     { 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0 },
 };
 
diff --git a/arch/mips/au1000/common/dbdma.c b/arch/mips/au1000/common/dbdma.c
index adfc3172aace..d00e8247d6c2 100644
--- a/arch/mips/au1000/common/dbdma.c
+++ b/arch/mips/au1000/common/dbdma.c
@@ -29,6 +29,7 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  *
  */
+
 #include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -38,10 +39,12 @@
 #include <linux/string.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>
 #include <asm/system.h>
 
+
 #if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
 
 /*
@@ -61,37 +64,10 @@ static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock);
 */
 #define ALIGN_ADDR(x, a)	((((u32)(x)) + (a-1)) & ~(a-1))
 
-static volatile dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE;
-static int dbdma_initialized;
+static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE;
+static int dbdma_initialized=0;
 static void au1xxx_dbdma_init(void);
 
-typedef struct dbdma_device_table {
-	u32		dev_id;
-	u32		dev_flags;
-	u32		dev_tsize;
-	u32		dev_devwidth;
-	u32		dev_physaddr;		/* If FIFO */
-	u32		dev_intlevel;
-	u32		dev_intpolarity;
-} dbdev_tab_t;
-
-typedef struct dbdma_chan_config {
-	u32			chan_flags;
-	u32			chan_index;
-	dbdev_tab_t		*chan_src;
-	dbdev_tab_t		*chan_dest;
-	au1x_dma_chan_t		*chan_ptr;
-	au1x_ddma_desc_t	*chan_desc_base;
-	au1x_ddma_desc_t	*get_ptr, *put_ptr, *cur_ptr;
-	void			*chan_callparam;
-	void (*chan_callback)(int, void *, struct pt_regs *);
-} chan_tab_t;
-
-#define	DEV_FLAGS_INUSE		(1 << 0)
-#define	DEV_FLAGS_ANYUSE	(1 << 1)
-#define DEV_FLAGS_OUT		(1 << 2)
-#define DEV_FLAGS_IN		(1 << 3)
-
 static dbdev_tab_t dbdev_tab[] = {
 #ifdef CONFIG_SOC_AU1550
 	/* UARTS */
@@ -157,25 +133,25 @@ static dbdev_tab_t dbdev_tab[] = {
 	{ DSCR_CMD0_MAE_BOTH, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
 	{ DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
 
-	{ DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
-	{ DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
-	{ DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
-	{ DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
+	{ DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 },
+	{ DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 4, 8, 0x10600004, 0, 0 },
+	{ DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 4, 8, 0x10680000, 0, 0 },
+	{ DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 4, 8, 0x10680004, 0, 0 },
 
-	{ DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
-	{ DSCR_CMD0_AES_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
+	{ DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 },
+	{ DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 },
 
-	{ DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 0, 0x11a0001c, 0, 0 },
-	{ DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 0, 0x11a0001c, 0, 0 },
+	{ DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 16, 0x11a0001c, 0, 0 },
+	{ DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 16, 0x11a0001c, 0, 0 },
 	{ DSCR_CMD0_PSC0_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
 
-	{ DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 0, 0x11b0001c, 0, 0 },
-	{ DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 0, 0x11b0001c, 0, 0 },
+	{ DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 16, 0x11b0001c, 0, 0 },
+	{ DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 16, 0x11b0001c, 0, 0 },
 	{ DSCR_CMD0_PSC1_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
 
-	{ DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
-	{ DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
-	{ DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
+	{ DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 32, 0x14004020, 0, 0 },
+	{ DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 32, 0x14004040, 0, 0 },
+	{ DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 32, 0x14004060, 0, 0 },
 	{ DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
 
 	{ DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
@@ -184,6 +160,24 @@ static dbdev_tab_t dbdev_tab[] = {
 
 	{ DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
 	{ DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+
+	/* Provide 16 user definable device types */
+	{ 0, 0, 0, 0, 0, 0, 0 },
+	{ 0, 0, 0, 0, 0, 0, 0 },
+	{ 0, 0, 0, 0, 0, 0, 0 },
+	{ 0, 0, 0, 0, 0, 0, 0 },
+	{ 0, 0, 0, 0, 0, 0, 0 },
+	{ 0, 0, 0, 0, 0, 0, 0 },
+	{ 0, 0, 0, 0, 0, 0, 0 },
+	{ 0, 0, 0, 0, 0, 0, 0 },
+	{ 0, 0, 0, 0, 0, 0, 0 },
+	{ 0, 0, 0, 0, 0, 0, 0 },
+	{ 0, 0, 0, 0, 0, 0, 0 },
+	{ 0, 0, 0, 0, 0, 0, 0 },
+	{ 0, 0, 0, 0, 0, 0, 0 },
+	{ 0, 0, 0, 0, 0, 0, 0 },
+	{ 0, 0, 0, 0, 0, 0, 0 },
+	{ 0, 0, 0, 0, 0, 0, 0 },
 };
 
 #define DBDEV_TAB_SIZE (sizeof(dbdev_tab) / sizeof(dbdev_tab_t))
@@ -203,6 +197,36 @@ find_dbdev_id (u32 id)
 	return NULL;
 }
 
+void * au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp)
+{
+        return phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
+}
+EXPORT_SYMBOL(au1xxx_ddma_get_nextptr_virt);
+
+u32
+au1xxx_ddma_add_device(dbdev_tab_t *dev)
+{
+	u32 ret = 0;
+	dbdev_tab_t *p=NULL;
+	static u16 new_id=0x1000;
+
+	p = find_dbdev_id(0);
+	if ( NULL != p )
+	{
+		memcpy(p, dev, sizeof(dbdev_tab_t));
+ 		p->dev_id = DSCR_DEV2CUSTOM_ID(new_id,dev->dev_id);
+		ret = p->dev_id;
+		new_id++;
+#if 0
+		printk("add_device: id:%x flags:%x padd:%x\n",
+				p->dev_id, p->dev_flags, p->dev_physaddr );
+#endif
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(au1xxx_ddma_add_device);
+
 /* Allocate a channel and return a non-zero descriptor if successful.
 */
 u32
@@ -215,7 +239,7 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
 	int		i;
 	dbdev_tab_t	*stp, *dtp;
 	chan_tab_t	*ctp;
-	volatile au1x_dma_chan_t *cp;
+	au1x_dma_chan_t *cp;
 
 	/* We do the intialization on the first channel allocation.
 	 * We have to wait because of the interrupt handler initialization
@@ -225,9 +249,6 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
 		au1xxx_dbdma_init();
 	dbdma_initialized = 1;
 
-	if ((srcid > DSCR_NDEV_IDS) || (destid > DSCR_NDEV_IDS))
-		return 0;
-
 	if ((stp = find_dbdev_id(srcid)) == NULL) return 0;
 	if ((dtp = find_dbdev_id(destid)) == NULL) return 0;
 
@@ -271,7 +292,6 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
 				 */
 				ctp = kmalloc(sizeof(chan_tab_t), GFP_KERNEL);
 				chan_tab_ptr[i] = ctp;
-				ctp->chan_index = chan = i;
 				break;
 			}
 		}
@@ -279,10 +299,11 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
 
 		if (ctp != NULL) {
 			memset(ctp, 0, sizeof(chan_tab_t));
+			ctp->chan_index = chan = i;
 			dcp = DDMA_CHANNEL_BASE;
 			dcp += (0x0100 * chan);
 			ctp->chan_ptr = (au1x_dma_chan_t *)dcp;
-			cp = (volatile au1x_dma_chan_t *)dcp;
+			cp = (au1x_dma_chan_t *)dcp;
 			ctp->chan_src = stp;
 			ctp->chan_dest = dtp;
 			ctp->chan_callback = callback;
@@ -299,6 +320,9 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
 				i |= DDMA_CFG_DED;
 			if (dtp->dev_intpolarity)
 				i |= DDMA_CFG_DP;
+			if ((stp->dev_flags & DEV_FLAGS_SYNC) ||
+				(dtp->dev_flags & DEV_FLAGS_SYNC))
+					i |= DDMA_CFG_SYNC;
 			cp->ddma_cfg = i;
 			au_sync();
 
@@ -309,14 +333,14 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
 			rv = (u32)(&chan_tab_ptr[chan]);
 		}
 		else {
-			/* Release devices.
-			*/
+			/* Release devices */
 			stp->dev_flags &= ~DEV_FLAGS_INUSE;
 			dtp->dev_flags &= ~DEV_FLAGS_INUSE;
 		}
 	}
 	return rv;
 }
+EXPORT_SYMBOL(au1xxx_dbdma_chan_alloc);
 
 /* Set the device width if source or destination is a FIFO.
  * Should be 8, 16, or 32 bits.
@@ -344,6 +368,7 @@ au1xxx_dbdma_set_devwidth(u32 chanid, int bits)
 
 	return rv;
 }
+EXPORT_SYMBOL(au1xxx_dbdma_set_devwidth);
 
 /* Allocate a descriptor ring, initializing as much as possible.
 */
@@ -370,7 +395,8 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
 	 * and if we try that first we are likely to not waste larger
 	 * slabs of memory.
 	 */
-	desc_base = (u32)kmalloc(entries * sizeof(au1x_ddma_desc_t), GFP_KERNEL);
+	desc_base = (u32)kmalloc(entries * sizeof(au1x_ddma_desc_t),
+			GFP_KERNEL|GFP_DMA);
 	if (desc_base == 0)
 		return 0;
 
@@ -381,7 +407,7 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
 		kfree((const void *)desc_base);
 		i = entries * sizeof(au1x_ddma_desc_t);
 		i += (sizeof(au1x_ddma_desc_t) - 1);
-		if ((desc_base = (u32)kmalloc(i, GFP_KERNEL)) == 0)
+		if ((desc_base = (u32)kmalloc(i, GFP_KERNEL|GFP_DMA)) == 0)
 			return 0;
 
 		desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t));
@@ -403,7 +429,13 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
 	cmd0 |= DSCR_CMD0_SID(srcid);
 	cmd0 |= DSCR_CMD0_DID(destid);
 	cmd0 |= DSCR_CMD0_IE | DSCR_CMD0_CV;
-	cmd0 |= DSCR_CMD0_ST(DSCR_CMD0_ST_CURRENT);
+	cmd0 |= DSCR_CMD0_ST(DSCR_CMD0_ST_NOCHANGE);
+
+        /* is it mem to mem transfer? */
+        if(((DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_THROTTLE) || (DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_ALWAYS)) &&
+           ((DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_THROTTLE) || (DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_ALWAYS))) {
+               cmd0 |= DSCR_CMD0_MEM;
+        }
 
 	switch (stp->dev_devwidth) {
 	case 8:
@@ -461,9 +493,14 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
 	/* If source input is fifo, set static address.
 	*/
 	if (stp->dev_flags & DEV_FLAGS_IN) {
-		src0 = stp->dev_physaddr;
+		if ( stp->dev_flags & DEV_FLAGS_BURSTABLE )
+			src1 |= DSCR_SRC1_SAM(DSCR_xAM_BURST);
+		else
 		src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC);
+
 	}
+	if (stp->dev_physaddr)
+		src0 = stp->dev_physaddr;
 
 	/* Set up dest1.  For now, assume no stride and increment.
 	 * A channel attribute update can change this later.
@@ -487,10 +524,18 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
 	/* If destination output is fifo, set static address.
 	*/
 	if (dtp->dev_flags & DEV_FLAGS_OUT) {
-		dest0 = dtp->dev_physaddr;
+		if ( dtp->dev_flags & DEV_FLAGS_BURSTABLE )
+	                dest1 |= DSCR_DEST1_DAM(DSCR_xAM_BURST);
+				else
 		dest1 |= DSCR_DEST1_DAM(DSCR_xAM_STATIC);
 	}
+	if (dtp->dev_physaddr)
+		dest0 = dtp->dev_physaddr;
 
+#if 0
+		printk("did:%x sid:%x cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
+			dtp->dev_id, stp->dev_id, cmd0, cmd1, src0, src1, dest0, dest1 );
+#endif
 	for (i=0; i<entries; i++) {
 		dp->dscr_cmd0 = cmd0;
 		dp->dscr_cmd1 = cmd1;
@@ -499,6 +544,8 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
 		dp->dscr_dest0 = dest0;
 		dp->dscr_dest1 = dest1;
 		dp->dscr_stat = 0;
+		dp->sw_context = 0;
+		dp->sw_status = 0;
 		dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(dp + 1));
 		dp++;
 	}
@@ -511,13 +558,14 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
 
 	return (u32)(ctp->chan_desc_base);
 }
+EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc);
 
 /* Put a source buffer into the DMA ring.
  * This updates the source pointer and byte count.  Normally used
  * for memory to fifo transfers.
  */
 u32
-au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes)
+_au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags)
 {
 	chan_tab_t		*ctp;
 	au1x_ddma_desc_t	*dp;
@@ -544,8 +592,24 @@ au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes)
 	*/
 	dp->dscr_source0 = virt_to_phys(buf);
 	dp->dscr_cmd1 = nbytes;
-	dp->dscr_cmd0 |= DSCR_CMD0_V;	/* Let it rip */
-	ctp->chan_ptr->ddma_dbell = 0xffffffff;	/* Make it go */
+	/* Check flags  */
+	if (flags & DDMA_FLAGS_IE)
+		dp->dscr_cmd0 |= DSCR_CMD0_IE;
+	if (flags & DDMA_FLAGS_NOIE)
+		dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
+
+	/*
+	 * There is an errata on the Au1200/Au1550 parts that could result
+	 * in "stale" data being DMA'd. It has to do with the snoop logic on
+	 * the dache eviction buffer.  NONCOHERENT_IO is on by default for
+	 * these parts. If it is fixedin the future, these dma_cache_inv will
+	 * just be nothing more than empty macros. See io.h.
+	 * */
+	dma_cache_wback_inv((unsigned long)buf, nbytes);
+        dp->dscr_cmd0 |= DSCR_CMD0_V;        /* Let it rip */
+	au_sync();
+	dma_cache_wback_inv((unsigned long)dp, sizeof(dp));
+        ctp->chan_ptr->ddma_dbell = 0;
 
 	/* Get next descriptor pointer.
 	*/
@@ -555,13 +619,14 @@ au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes)
 	*/
 	return nbytes;
 }
+EXPORT_SYMBOL(_au1xxx_dbdma_put_source);
 
 /* Put a destination buffer into the DMA ring.
  * This updates the destination pointer and byte count.  Normally used
  * to place an empty buffer into the ring for fifo to memory transfers.
  */
 u32
-au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes)
+_au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags)
 {
 	chan_tab_t		*ctp;
 	au1x_ddma_desc_t	*dp;
@@ -583,11 +648,33 @@ au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes)
 	if (dp->dscr_cmd0 & DSCR_CMD0_V)
 		return 0;
 
-	/* Load up buffer address and byte count.
-	*/
+	/* Load up buffer address and byte count */
+
+	/* Check flags  */
+	if (flags & DDMA_FLAGS_IE)
+		dp->dscr_cmd0 |= DSCR_CMD0_IE;
+	if (flags & DDMA_FLAGS_NOIE)
+		dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
+
 	dp->dscr_dest0 = virt_to_phys(buf);
 	dp->dscr_cmd1 = nbytes;
+#if 0
+	printk("cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
+			dp->dscr_cmd0, dp->dscr_cmd1, dp->dscr_source0,
+			dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1 );
+#endif
+	/*
+	 * There is an errata on the Au1200/Au1550 parts that could result in
+	 * "stale" data being DMA'd. It has to do with the snoop logic on the
+	 * dache eviction buffer. NONCOHERENT_IO is on by default for these
+	 * parts. If it is fixedin the future, these dma_cache_inv will just
+	 * be nothing more than empty macros. See io.h.
+	 * */
+	dma_cache_inv((unsigned long)buf,nbytes);
 	dp->dscr_cmd0 |= DSCR_CMD0_V;	/* Let it rip */
+	au_sync();
+	dma_cache_wback_inv((unsigned long)dp, sizeof(dp));
+        ctp->chan_ptr->ddma_dbell = 0;
 
 	/* Get next descriptor pointer.
 	*/
@@ -597,6 +684,7 @@ au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes)
 	*/
 	return nbytes;
 }
+EXPORT_SYMBOL(_au1xxx_dbdma_put_dest);
 
 /* Get a destination buffer into the DMA ring.
  * Normally used to get a full buffer from the ring during fifo
@@ -646,7 +734,7 @@ void
 au1xxx_dbdma_stop(u32 chanid)
 {
 	chan_tab_t	*ctp;
-	volatile au1x_dma_chan_t *cp;
+	au1x_dma_chan_t *cp;
 	int halt_timeout = 0;
 
 	ctp = *((chan_tab_t **)chanid);
@@ -666,6 +754,7 @@ au1xxx_dbdma_stop(u32 chanid)
 	cp->ddma_stat |= (DDMA_STAT_DB | DDMA_STAT_V);
 	au_sync();
 }
+EXPORT_SYMBOL(au1xxx_dbdma_stop);
 
 /* Start using the current descriptor pointer.  If the dbdma encounters
  * a not valid descriptor, it will stop.  In this case, we can just
@@ -675,17 +764,17 @@ void
 au1xxx_dbdma_start(u32 chanid)
 {
 	chan_tab_t	*ctp;
-	volatile au1x_dma_chan_t *cp;
+	au1x_dma_chan_t *cp;
 
 	ctp = *((chan_tab_t **)chanid);
-
 	cp = ctp->chan_ptr;
 	cp->ddma_desptr = virt_to_phys(ctp->cur_ptr);
 	cp->ddma_cfg |= DDMA_CFG_EN;	/* Enable channel */
 	au_sync();
-	cp->ddma_dbell = 0xffffffff;	/* Make it go */
+	cp->ddma_dbell = 0;
 	au_sync();
 }
+EXPORT_SYMBOL(au1xxx_dbdma_start);
 
 void
 au1xxx_dbdma_reset(u32 chanid)
@@ -704,15 +793,21 @@ au1xxx_dbdma_reset(u32 chanid)
 
 	do {
 		dp->dscr_cmd0 &= ~DSCR_CMD0_V;
+		/* reset our SW status -- this is used to determine
+		 * if a descriptor is in use by upper level SW. Since
+		 * posting can reset 'V' bit.
+		 */
+		dp->sw_status = 0;
 		dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
 	} while (dp != ctp->chan_desc_base);
 }
+EXPORT_SYMBOL(au1xxx_dbdma_reset);
 
 u32
 au1xxx_get_dma_residue(u32 chanid)
 {
 	chan_tab_t	*ctp;
-	volatile au1x_dma_chan_t *cp;
+	au1x_dma_chan_t *cp;
 	u32		rv;
 
 	ctp = *((chan_tab_t **)chanid);
@@ -738,8 +833,7 @@ au1xxx_dbdma_chan_free(u32 chanid)
 
 	au1xxx_dbdma_stop(chanid);
 
-	if (ctp->chan_desc_base != NULL)
-		kfree(ctp->chan_desc_base);
+	kfree((void *)ctp->chan_desc_base);
 
 	stp->dev_flags &= ~DEV_FLAGS_INUSE;
 	dtp->dev_flags &= ~DEV_FLAGS_INUSE;
@@ -747,15 +841,16 @@ au1xxx_dbdma_chan_free(u32 chanid)
 
 	kfree(ctp);
 }
+EXPORT_SYMBOL(au1xxx_dbdma_chan_free);
 
 static irqreturn_t
 dbdma_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
-	u32	intstat;
-	u32	chan_index;
+	u32 intstat;
+	u32 chan_index;
 	chan_tab_t		*ctp;
 	au1x_ddma_desc_t	*dp;
-	volatile au1x_dma_chan_t *cp;
+	au1x_dma_chan_t *cp;
 
 	intstat = dbdma_gptr->ddma_intstat;
 	au_sync();
@@ -774,19 +869,27 @@ dbdma_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 		(ctp->chan_callback)(irq, ctp->chan_callparam, regs);
 
 	ctp->cur_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
-
-	return IRQ_HANDLED;
+	return IRQ_RETVAL(1);
 }
 
-static void
-au1xxx_dbdma_init(void)
+static void au1xxx_dbdma_init(void)
 {
+	int irq_nr;
+
 	dbdma_gptr->ddma_config = 0;
 	dbdma_gptr->ddma_throttle = 0;
 	dbdma_gptr->ddma_inten = 0xffff;
 	au_sync();
 
-	if (request_irq(AU1550_DDMA_INT, dbdma_interrupt, SA_INTERRUPT,
+#if defined(CONFIG_SOC_AU1550)
+	irq_nr = AU1550_DDMA_INT;
+#elif defined(CONFIG_SOC_AU1200)
+	irq_nr = AU1200_DDMA_INT;
+#else
+	#error Unknown Au1x00 SOC
+#endif
+
+	if (request_irq(irq_nr, dbdma_interrupt, SA_INTERRUPT,
 			"Au1xxx dbdma", (void *)dbdma_gptr))
 		printk("Can't get 1550 dbdma irq");
 }
@@ -797,7 +900,8 @@ au1xxx_dbdma_dump(u32 chanid)
 	chan_tab_t		*ctp;
 	au1x_ddma_desc_t	*dp;
 	dbdev_tab_t		*stp, *dtp;
-	volatile au1x_dma_chan_t *cp;
+	au1x_dma_chan_t *cp;
+		u32			i = 0;
 
 	ctp = *((chan_tab_t **)chanid);
 	stp = ctp->chan_src;
@@ -822,15 +926,64 @@ au1xxx_dbdma_dump(u32 chanid)
 	dp = ctp->chan_desc_base;
 
 	do {
-		printk("dp %08x, cmd0 %08x, cmd1 %08x\n",
-			(u32)dp, dp->dscr_cmd0, dp->dscr_cmd1);
-		printk("src0 %08x, src1 %08x, dest0 %08x\n",
-			dp->dscr_source0, dp->dscr_source1, dp->dscr_dest0);
-		printk("dest1 %08x, stat %08x, nxtptr %08x\n",
-			dp->dscr_dest1, dp->dscr_stat, dp->dscr_nxtptr);
+                printk("Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n",
+                        i++, (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1);
+                printk("src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n",
+                        dp->dscr_source0, dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1);
+                printk("stat %08x, nxtptr %08x\n",
+                        dp->dscr_stat, dp->dscr_nxtptr);
 		dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
 	} while (dp != ctp->chan_desc_base);
 }
 
+/* Put a descriptor into the DMA ring.
+ * This updates the source/destination pointers and byte count.
+ */
+u32
+au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr )
+{
+	chan_tab_t *ctp;
+	au1x_ddma_desc_t *dp;
+	u32 nbytes=0;
+
+	/* I guess we could check this to be within the
+	* range of the table......
+	*/
+	ctp = *((chan_tab_t **)chanid);
+
+	/* We should have multiple callers for a particular channel,
+	* an interrupt doesn't affect this pointer nor the descriptor,
+	* so no locking should be needed.
+	*/
+	dp = ctp->put_ptr;
+
+	/* If the descriptor is valid, we are way ahead of the DMA
+	* engine, so just return an error condition.
+	*/
+	if (dp->dscr_cmd0 & DSCR_CMD0_V)
+		return 0;
+
+	/* Load up buffer addresses and byte count.
+	*/
+	dp->dscr_dest0 = dscr->dscr_dest0;
+	dp->dscr_source0 = dscr->dscr_source0;
+	dp->dscr_dest1 = dscr->dscr_dest1;
+	dp->dscr_source1 = dscr->dscr_source1;
+	dp->dscr_cmd1 = dscr->dscr_cmd1;
+	nbytes = dscr->dscr_cmd1;
+	/* Allow the caller to specifiy if an interrupt is generated */
+	dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
+	dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V;
+	ctp->chan_ptr->ddma_dbell = 0;
+
+	/* Get next descriptor pointer.
+	*/
+	ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
+
+	/* return something not zero.
+	*/
+	return nbytes;
+}
+
 #endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */
 
diff --git a/arch/mips/au1000/common/dma.c b/arch/mips/au1000/common/dma.c
index 372c33f1353d..1905c6b104f2 100644
--- a/arch/mips/au1000/common/dma.c
+++ b/arch/mips/au1000/common/dma.c
@@ -39,7 +39,6 @@
 #include <linux/string.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
-#include <linux/module.h>
 #include <asm/system.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1000_dma.h>
diff --git a/arch/mips/au1000/common/gpio.c b/arch/mips/au1000/common/gpio.c
new file mode 100644
index 000000000000..5f5915b83142
--- /dev/null
+++ b/arch/mips/au1000/common/gpio.c
@@ -0,0 +1,119 @@
+/*
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
+ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
+ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <au1000.h>
+#include <au1xxx_gpio.h>
+
+#define gpio1 sys
+#if !defined(CONFIG_SOC_AU1000)
+static AU1X00_GPIO2 * const gpio2 = (AU1X00_GPIO2 *)GPIO2_BASE;
+
+#define GPIO2_OUTPUT_ENABLE_MASK 0x00010000
+
+int au1xxx_gpio2_read(int signal)
+{
+	signal -= 200;
+/*	gpio2->dir &= ~(0x01 << signal);						//Set GPIO to input */
+	return ((gpio2->pinstate >> signal) & 0x01);
+}
+
+void au1xxx_gpio2_write(int signal, int value)
+{
+	signal -= 200;
+
+	gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << signal) |
+		(value << signal);
+}
+
+void au1xxx_gpio2_tristate(int signal)
+{
+	signal -= 200;
+	gpio2->dir &= ~(0x01 << signal); 	/* Set GPIO to input */
+}
+#endif
+
+int au1xxx_gpio1_read(int signal)
+{
+/*	gpio1->trioutclr |= (0x01 << signal); */
+	return ((gpio1->pinstaterd >> signal) & 0x01);
+}
+
+void au1xxx_gpio1_write(int signal, int value)
+{
+	if(value)
+		gpio1->outputset = (0x01 << signal);
+	else
+		gpio1->outputclr = (0x01 << signal);	/* Output a Zero */
+}
+
+void au1xxx_gpio1_tristate(int signal)
+{
+	gpio1->trioutclr = (0x01 << signal);		/* Tristate signal */
+}
+
+
+int au1xxx_gpio_read(int signal)
+{
+	if(signal >= 200)
+#if defined(CONFIG_SOC_AU1000)
+		return 0;
+#else
+		return au1xxx_gpio2_read(signal);
+#endif
+	else
+		return au1xxx_gpio1_read(signal);
+}
+
+void au1xxx_gpio_write(int signal, int value)
+{
+	if(signal >= 200)
+#if defined(CONFIG_SOC_AU1000)
+		;
+#else
+		au1xxx_gpio2_write(signal, value);
+#endif
+	else
+		au1xxx_gpio1_write(signal, value);
+}
+
+void au1xxx_gpio_tristate(int signal)
+{
+	if(signal >= 200)
+#if defined(CONFIG_SOC_AU1000)
+		;
+#else
+		au1xxx_gpio2_tristate(signal);
+#endif
+	else
+		au1xxx_gpio1_tristate(signal);
+}
+
+void au1xxx_gpio1_set_inputs(void)
+{
+	gpio1->pininputen = 0;
+}
+
+EXPORT_SYMBOL(au1xxx_gpio1_set_inputs);
+EXPORT_SYMBOL(au1xxx_gpio_tristate);
+EXPORT_SYMBOL(au1xxx_gpio_write);
+EXPORT_SYMBOL(au1xxx_gpio_read);
diff --git a/arch/mips/au1000/common/irq.c b/arch/mips/au1000/common/irq.c
index d1eb5a4a9a19..1339a0979f66 100644
--- a/arch/mips/au1000/common/irq.c
+++ b/arch/mips/au1000/common/irq.c
@@ -83,7 +83,7 @@ inline void local_disable_irq(unsigned int irq_nr);
 void	(*board_init_irq)(void);
 
 #ifdef CONFIG_PM
-extern void counter0_irq(int irq, void *dev_id, struct pt_regs *regs);
+extern irqreturn_t counter0_irq(int irq, void *dev_id, struct pt_regs *regs);
 #endif
 
 static DEFINE_SPINLOCK(irq_lock);
@@ -253,52 +253,72 @@ void restore_local_and_enable(int controller, unsigned long mask)
 
 
 static struct hw_interrupt_type rise_edge_irq_type = {
-	"Au1000 Rise Edge",
-	startup_irq,
-	shutdown_irq,
-	local_enable_irq,
-	local_disable_irq,
-	mask_and_ack_rise_edge_irq,
-	end_irq,
-	NULL
+	.typename = "Au1000 Rise Edge",
+	.startup = startup_irq,
+	.shutdown = shutdown_irq,
+	.enable = local_enable_irq,
+	.disable = local_disable_irq,
+	.ack = mask_and_ack_rise_edge_irq,
+	.end = end_irq,
 };
 
 static struct hw_interrupt_type fall_edge_irq_type = {
-	"Au1000 Fall Edge",
-	startup_irq,
-	shutdown_irq,
-	local_enable_irq,
-	local_disable_irq,
-	mask_and_ack_fall_edge_irq,
-	end_irq,
-	NULL
+	.typename = "Au1000 Fall Edge",
+	.startup = startup_irq,
+	.shutdown = shutdown_irq,
+	.enable = local_enable_irq,
+	.disable = local_disable_irq,
+	.ack = mask_and_ack_fall_edge_irq,
+	.end = end_irq,
 };
 
 static struct hw_interrupt_type either_edge_irq_type = {
-	"Au1000 Rise or Fall Edge",
-	startup_irq,
-	shutdown_irq,
-	local_enable_irq,
-	local_disable_irq,
-	mask_and_ack_either_edge_irq,
-	end_irq,
-	NULL
+	.typename = "Au1000 Rise or Fall Edge",
+	.startup = startup_irq,
+	.shutdown = shutdown_irq,
+	.enable = local_enable_irq,
+	.disable = local_disable_irq,
+	.ack = mask_and_ack_either_edge_irq,
+	.end = end_irq,
 };
 
 static struct hw_interrupt_type level_irq_type = {
-	"Au1000 Level",
-	startup_irq,
-	shutdown_irq,
-	local_enable_irq,
-	local_disable_irq,
-	mask_and_ack_level_irq,
-	end_irq,
-	NULL
+	.typename = "Au1000 Level",
+	.startup = startup_irq,
+	.shutdown = shutdown_irq,
+	.enable = local_enable_irq,
+	.disable = local_disable_irq,
+	.ack = mask_and_ack_level_irq,
+	.end = end_irq,
 };
 
 #ifdef CONFIG_PM
-void startup_match20_interrupt(void)
+void startup_match20_interrupt(irqreturn_t (*handler)(int, void *, struct pt_regs *))
 {
+	struct irq_desc *desc = &irq_desc[AU1000_TOY_MATCH2_INT];
+
+	static struct irqaction action;
+	memset(&action, 0, sizeof(struct irqaction));
+
+	/* This is a big problem.... since we didn't use request_irq
+	 * when kernel/irq.c calls probe_irq_xxx this interrupt will
+	 * be probed for usage. This will end up disabling the device :(
+	 * Give it a bogus "action" pointer -- this will keep it from
+	 * getting auto-probed!
+	 *
+	 * By setting the status to match that of request_irq() we
+	 * can avoid it.  --cgray
+	*/
+	action.dev_id = handler;
+	action.flags = SA_INTERRUPT;
+	cpus_clear(action.mask);
+	action.name = "Au1xxx TOY";
+	action.handler = handler;
+	action.next = NULL;
+
+	desc->action = &action;
+	desc->status &= ~(IRQ_DISABLED | IRQ_AUTODETECT | IRQ_WAITING | IRQ_INPROGRESS);
+
 	local_enable_irq(AU1000_TOY_MATCH2_INT);
 }
 #endif
@@ -426,7 +446,6 @@ void __init arch_init_irq(void)
 	extern int au1xxx_ic0_nr_irqs;
 
 	cp0_status = read_c0_status();
-	memset(irq_desc, 0, sizeof(irq_desc));
 	set_except_vector(0, au1000_IRQ);
 
 	/* Initialize interrupt controllers to a safe state.
@@ -492,7 +511,7 @@ void intc0_req0_irqdispatch(struct pt_regs *regs)
 	intc0_req0 |= au_readl(IC0_REQ0INT);
 
 	if (!intc0_req0) return;
-
+#ifdef AU1000_USB_DEV_REQ_INT
 	/*
 	 * Because of the tight timing of SETUP token to reply
 	 * transactions, the USB devices-side packet complete
@@ -503,7 +522,7 @@ void intc0_req0_irqdispatch(struct pt_regs *regs)
 		do_IRQ(AU1000_USB_DEV_REQ_INT, regs);
 		return;
 	}
-
+#endif
 	irq = au_ffs(intc0_req0) - 1;
 	intc0_req0 &= ~(1<<irq);
 	do_IRQ(irq, regs);
@@ -521,17 +540,7 @@ void intc0_req1_irqdispatch(struct pt_regs *regs)
 
 	irq = au_ffs(intc0_req1) - 1;
 	intc0_req1 &= ~(1<<irq);
-#ifdef CONFIG_PM
-	if (irq == AU1000_TOY_MATCH2_INT) {
-		mask_and_ack_rise_edge_irq(irq);
-		counter0_irq(irq, NULL, regs);
-		local_enable_irq(irq);
-	}
-	else
-#endif
-	{
-		do_IRQ(irq, regs);
-	}
+	do_IRQ(irq, regs);
 }
 
 
diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c
index 0776b2db5641..48d3f54f88f8 100644
--- a/arch/mips/au1000/common/platform.c
+++ b/arch/mips/au1000/common/platform.c
@@ -7,13 +7,16 @@
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
+#include <linux/config.h>
 #include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/resource.h>
 
-#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1xxx.h>
 
+/* OHCI (USB full speed host controller) */
 static struct resource au1xxx_usb_ohci_resources[] = {
 	[0] = {
 		.start		= USB_OHCI_BASE,
@@ -41,8 +44,252 @@ static struct platform_device au1xxx_usb_ohci_device = {
 	.resource	= au1xxx_usb_ohci_resources,
 };
 
+/*** AU1100 LCD controller ***/
+
+#ifdef CONFIG_FB_AU1100
+static struct resource au1100_lcd_resources[] = {
+	[0] = {
+		.start          = LCD_PHYS_ADDR,
+		.end            = LCD_PHYS_ADDR + 0x800 - 1,
+		.flags          = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start          = AU1100_LCD_INT,
+		.end            = AU1100_LCD_INT,
+		.flags          = IORESOURCE_IRQ,
+	}
+};
+
+static u64 au1100_lcd_dmamask = ~(u32)0;
+
+static struct platform_device au1100_lcd_device = {
+	.name           = "au1100-lcd",
+	.id             = 0,
+	.dev = {
+		.dma_mask               = &au1100_lcd_dmamask,
+		.coherent_dma_mask      = 0xffffffff,
+	},
+	.num_resources  = ARRAY_SIZE(au1100_lcd_resources),
+	.resource       = au1100_lcd_resources,
+};
+#endif
+
+#ifdef CONFIG_SOC_AU1200
+/* EHCI (USB high speed host controller) */
+static struct resource au1xxx_usb_ehci_resources[] = {
+	[0] = {
+		.start		= USB_EHCI_BASE,
+		.end		= USB_EHCI_BASE + USB_EHCI_LEN - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= AU1000_USB_HOST_INT,
+		.end		= AU1000_USB_HOST_INT,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static u64 ehci_dmamask = ~(u32)0;
+
+static struct platform_device au1xxx_usb_ehci_device = {
+	.name		= "au1xxx-ehci",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &ehci_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(au1xxx_usb_ehci_resources),
+	.resource	= au1xxx_usb_ehci_resources,
+};
+
+/* Au1200 UDC (USB gadget controller) */
+static struct resource au1xxx_usb_gdt_resources[] = {
+	[0] = {
+		.start		= USB_UDC_BASE,
+		.end		= USB_UDC_BASE + USB_UDC_LEN - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= AU1200_USB_INT,
+		.end		= AU1200_USB_INT,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource au1xxx_mmc_resources[] = {
+	[0] = {
+		.start          = SD0_PHYS_ADDR,
+		.end            = SD0_PHYS_ADDR + 0x40,
+		.flags          = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= SD1_PHYS_ADDR,
+		.end 		= SD1_PHYS_ADDR + 0x40,
+		.flags		= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start          = AU1200_SD_INT,
+		.end            = AU1200_SD_INT,
+		.flags          = IORESOURCE_IRQ,
+	}
+};
+
+static u64 udc_dmamask = ~(u32)0;
+
+static struct platform_device au1xxx_usb_gdt_device = {
+	.name		= "au1xxx-udc",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &udc_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(au1xxx_usb_gdt_resources),
+	.resource	= au1xxx_usb_gdt_resources,
+};
+
+/* Au1200 UOC (USB OTG controller) */
+static struct resource au1xxx_usb_otg_resources[] = {
+	[0] = {
+		.start		= USB_UOC_BASE,
+		.end		= USB_UOC_BASE + USB_UOC_LEN - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= AU1200_USB_INT,
+		.end		= AU1200_USB_INT,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static u64 uoc_dmamask = ~(u32)0;
+
+static struct platform_device au1xxx_usb_otg_device = {
+	.name		= "au1xxx-uoc",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &uoc_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(au1xxx_usb_otg_resources),
+	.resource	= au1xxx_usb_otg_resources,
+};
+
+static struct resource au1200_lcd_resources[] = {
+	[0] = {
+		.start          = LCD_PHYS_ADDR,
+		.end            = LCD_PHYS_ADDR + 0x800 - 1,
+		.flags          = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start          = AU1200_LCD_INT,
+		.end            = AU1200_LCD_INT,
+		.flags          = IORESOURCE_IRQ,
+	}
+};
+
+static struct resource au1200_ide0_resources[] = {
+	[0] = {
+		.start		= AU1XXX_ATA_PHYS_ADDR,
+		.end 		= AU1XXX_ATA_PHYS_ADDR + AU1XXX_ATA_PHYS_LEN,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= AU1XXX_ATA_INT,
+		.end		= AU1XXX_ATA_INT,
+		.flags		= IORESOURCE_IRQ,
+	}
+};
+
+static u64 au1200_lcd_dmamask = ~(u32)0;
+
+static struct platform_device au1200_lcd_device = {
+	.name           = "au1200-lcd",
+	.id             = 0,
+	.dev = {
+		.dma_mask               = &au1200_lcd_dmamask,
+		.coherent_dma_mask      = 0xffffffff,
+	},
+	.num_resources  = ARRAY_SIZE(au1200_lcd_resources),
+	.resource       = au1200_lcd_resources,
+};
+
+
+static u64 ide0_dmamask = ~(u32)0;
+
+static struct platform_device au1200_ide0_device = {
+	.name		= "au1200-ide",
+	.id		= 0,
+	.dev = {
+		.dma_mask 		= &ide0_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources = ARRAY_SIZE(au1200_ide0_resources),
+	.resource	= au1200_ide0_resources,
+};
+
+static u64 au1xxx_mmc_dmamask =  ~(u32)0;
+
+static struct platform_device au1xxx_mmc_device = {
+	.name = "au1xxx-mmc",
+	.id = 0,
+	.dev = {
+		.dma_mask               = &au1xxx_mmc_dmamask,
+		.coherent_dma_mask      = 0xffffffff,
+	},
+	.num_resources  = ARRAY_SIZE(au1xxx_mmc_resources),
+	.resource       = au1xxx_mmc_resources,
+};
+#endif /* #ifdef CONFIG_SOC_AU1200 */
+
+static struct platform_device au1x00_pcmcia_device = {
+	.name 		= "au1x00-pcmcia",
+	.id 		= 0,
+};
+
+#ifdef CONFIG_MIPS_DB1200
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.name	= "smc91x-regs",
+		.start	= AU1XXX_SMC91111_PHYS_ADDR,
+		.end	= AU1XXX_SMC91111_PHYS_ADDR + 0xfffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1XXX_SMC91111_IRQ,
+		.end	= AU1XXX_SMC91111_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+ 	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+#endif
+
 static struct platform_device *au1xxx_platform_devices[] __initdata = {
 	&au1xxx_usb_ohci_device,
+	&au1x00_pcmcia_device,
+#ifdef CONFIG_FB_AU1100
+	&au1100_lcd_device,
+#endif
+#ifdef CONFIG_SOC_AU1200
+#if 0	/* fixme */
+	&au1xxx_usb_ehci_device,
+#endif
+	&au1xxx_usb_gdt_device,
+	&au1xxx_usb_otg_device,
+	&au1200_lcd_device,
+	&au1200_ide0_device,
+	&au1xxx_mmc_device,
+#endif
+#ifdef CONFIG_MIPS_DB1200
+ 	&smc91x_device,
+#endif
 };
 
 int au1xxx_platform_init(void)
diff --git a/arch/mips/au1000/common/power.c b/arch/mips/au1000/common/power.c
index c40daccbb5b1..f4926315fb68 100644
--- a/arch/mips/au1000/common/power.c
+++ b/arch/mips/au1000/common/power.c
@@ -32,13 +32,16 @@
 #include <linux/config.h>
 #include <linux/init.h>
 #include <linux/pm.h>
+#include <linux/pm_legacy.h>
 #include <linux/slab.h>
 #include <linux/sysctl.h>
+#include <linux/jiffies.h>
 
 #include <asm/string.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/system.h>
+#include <asm/cacheflush.h>
 #include <asm/mach-au1x00/au1000.h>
 
 #ifdef CONFIG_PM
@@ -50,7 +53,7 @@
 #  define DPRINTK(fmt, args...)
 #endif
 
-static void calibrate_delay(void);
+static void au1000_calibrate_delay(void);
 
 extern void set_au1x00_speed(unsigned int new_freq);
 extern unsigned int get_au1x00_speed(void);
@@ -260,7 +263,7 @@ int au_sleep(void)
 }
 
 static int pm_do_sleep(ctl_table * ctl, int write, struct file *file,
-		       void *buffer, size_t * len)
+		       void __user *buffer, size_t * len, loff_t *ppos)
 {
 	int retval = 0;
 #ifdef SLEEP_TEST_TIMEOUT
@@ -294,10 +297,9 @@ static int pm_do_sleep(ctl_table * ctl, int write, struct file *file,
 }
 
 static int pm_do_suspend(ctl_table * ctl, int write, struct file *file,
-			 void *buffer, size_t * len)
+			 void __user *buffer, size_t * len, loff_t *ppos)
 {
 	int retval = 0;
-	void	au1k_wait(void);
 
 	if (!write) {
 		*len = 0;
@@ -306,7 +308,7 @@ static int pm_do_suspend(ctl_table * ctl, int write, struct file *file,
 		if (retval)
 			return retval;
 		suspend_mode = 1;
-		au1k_wait();
+
 		retval = pm_send_all(PM_RESUME, (void *) 0);
 	}
 	return retval;
@@ -314,7 +316,7 @@ static int pm_do_suspend(ctl_table * ctl, int write, struct file *file,
 
 
 static int pm_do_freq(ctl_table * ctl, int write, struct file *file,
-		      void *buffer, size_t * len)
+		      void __user *buffer, size_t * len, loff_t *ppos)
 {
 	int retval = 0, i;
 	unsigned long val, pll;
@@ -409,14 +411,14 @@ static int pm_do_freq(ctl_table * ctl, int write, struct file *file,
 
 
 	/* We don't want _any_ interrupts other than
-	 * match20. Otherwise our calibrate_delay()
+	 * match20. Otherwise our au1000_calibrate_delay()
 	 * calculation will be off, potentially a lot.
 	 */
 	intc0_mask = save_local_and_disable(0);
 	intc1_mask = save_local_and_disable(1);
 	local_enable_irq(AU1000_TOY_MATCH2_INT);
 	spin_unlock_irqrestore(&pm_lock, flags);
-	calibrate_delay();
+	au1000_calibrate_delay();
 	restore_local_and_enable(0, intc0_mask);
 	restore_local_and_enable(1, intc1_mask);
 	return retval;
@@ -456,7 +458,7 @@ __initcall(pm_init);
    better than 1% */
 #define LPS_PREC 8
 
-static void calibrate_delay(void)
+static void au1000_calibrate_delay(void)
 {
 	unsigned long ticks, loopbit;
 	int lps_precision = LPS_PREC;
diff --git a/arch/mips/au1000/common/prom.c b/arch/mips/au1000/common/prom.c
index 22e5a85af4d5..9c171afd9a53 100644
--- a/arch/mips/au1000/common/prom.c
+++ b/arch/mips/au1000/common/prom.c
@@ -75,7 +75,8 @@ void  prom_init_cmdline(void)
 	}
 	if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
 		--cp;
-	*cp = '\0';
+	if (prom_argc > 1)
+		*cp = '\0';
 
 }
 
diff --git a/arch/mips/au1000/common/puts.c b/arch/mips/au1000/common/puts.c
index c2ae4624b77b..2705829cd466 100644
--- a/arch/mips/au1000/common/puts.c
+++ b/arch/mips/au1000/common/puts.c
@@ -39,7 +39,6 @@
 #define TIMEOUT       0xffffff
 #define SLOW_DOWN
 
-static const char digits[16] = "0123456789abcdef";
 static volatile unsigned long * const com1 = (unsigned long *)SERIAL_BASE;
 
 
@@ -54,7 +53,7 @@ static inline void slow_down(void)
 #endif
 
 void
-putch(const unsigned char c)
+prom_putchar(const unsigned char c)
 {
     unsigned char ch;
     int i = 0;
@@ -69,77 +68,3 @@ putch(const unsigned char c)
     } while (0 == (ch & TX_BUSY));
     com1[SER_DATA] = c;
 }
-
-void
-puts(unsigned char *cp)
-{
-    unsigned char ch;
-    int i = 0;
-
-    while (*cp) {
-        do {
-             ch = com1[SER_CMD];
-            slow_down();
-            i++;
-            if (i>TIMEOUT) {
-                break;
-            }
-        } while (0 == (ch & TX_BUSY));
-        com1[SER_DATA] = *cp++;
-    }
-    putch('\r');
-    putch('\n');
-}
-
-void
-fputs(const char *cp)
-{
-    unsigned char ch;
-    int i = 0;
-
-    while (*cp) {
-
-        do {
-             ch = com1[SER_CMD];
-             slow_down();
-            i++;
-            if (i>TIMEOUT) {
-                break;
-            }
-        } while (0 == (ch & TX_BUSY));
-        com1[SER_DATA] = *cp++;
-    }
-}
-
-
-void
-put64(uint64_t ul)
-{
-    int cnt;
-    unsigned ch;
-
-    cnt = 16;            /* 16 nibbles in a 64 bit long */
-    putch('0');
-    putch('x');
-    do {
-        cnt--;
-        ch = (unsigned char)(ul >> cnt * 4) & 0x0F;
-                putch(digits[ch]);
-    } while (cnt > 0);
-}
-
-void
-put32(unsigned u)
-{
-    int cnt;
-    unsigned ch;
-
-    cnt = 8;            /* 8 nibbles in a 32 bit long */
-    putch('0');
-    putch('x');
-    do {
-        cnt--;
-        ch = (unsigned char)(u >> cnt * 4) & 0x0F;
-                putch(digits[ch]);
-    } while (cnt > 0);
-}
diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c
index eff89e109ce6..08c8c855cc9c 100644
--- a/arch/mips/au1000/common/setup.c
+++ b/arch/mips/au1000/common/setup.c
@@ -32,6 +32,7 @@
 #include <linux/mm.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 
 #include <asm/cpu.h>
 #include <asm/bootinfo.h>
@@ -57,7 +58,7 @@ extern void au1xxx_time_init(void);
 extern void au1xxx_timer_setup(struct irqaction *irq);
 extern void set_cpuspec(void);
 
-static int __init au1x00_setup(void)
+void __init plat_setup(void)
 {
 	struct	cpu_spec *sp;
 	char *argptr;
@@ -92,7 +93,7 @@ static int __init au1x00_setup(void)
 
 	argptr = prom_getcmdline();
 
-#ifdef CONFIG_SERIAL_AU1X00_CONSOLE
+#if defined(CONFIG_SERIAL_AU1X00_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE)
 	if ((argptr = strstr(argptr, "console=")) == NULL) {
 		argptr = prom_getcmdline();
 		strcat(argptr, " console=ttyS0,115200");
@@ -106,23 +107,10 @@ static int __init au1x00_setup(void)
         /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
 #ifdef CONFIG_MIPS_HYDROGEN3
          strcat(argptr, " video=au1100fb:panel:Hydrogen_3_NEC_panel_320x240,nohwcursor");
-#else
-        strcat(argptr, " video=au1100fb:panel:s10,nohwcursor");
 #endif
     }
 #endif
 
-#ifdef CONFIG_FB_E1356
-	if ((argptr = strstr(argptr, "video=")) == NULL) {
-		argptr = prom_getcmdline();
-#ifdef CONFIG_MIPS_PB1000
-		strcat(argptr, " video=e1356fb:system:pb1000,mmunalign:1");
-#else
-		strcat(argptr, " video=e1356fb:system:pb1500");
-#endif
-	}
-#endif
-
 #ifdef CONFIG_FB_XPERT98
 	if ((argptr = strstr(argptr, "video=")) == NULL) {
 		argptr = prom_getcmdline();
@@ -153,15 +141,11 @@ static int __init au1x00_setup(void)
 	au_sync();
 	while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T0S);
 	au_writel(0, SYS_TOYTRIM);
-
-	return 0;
 }
 
-early_initcall(au1x00_setup);
-
 #if defined(CONFIG_64BIT_PHYS_ADDR)
 /* This routine should be valid for all Au1x based boards */
-phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
 {
 	u32 start, end;
 
@@ -192,4 +176,5 @@ phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
 	/* default nop */
 	return phys_addr;
 }
+EXPORT_SYMBOL(__fixup_bigphys_addr);
 #endif
diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c
index 57675b41480e..883d3f3d8c53 100644
--- a/arch/mips/au1000/common/time.c
+++ b/arch/mips/au1000/common/time.c
@@ -50,7 +50,6 @@
 #include <linux/mc146818rtc.h>
 #include <linux/timex.h>
 
-extern void startup_match20_interrupt(void);
 extern void do_softirq(void);
 extern volatile unsigned long wall_jiffies;
 unsigned long missed_heart_beats = 0;
@@ -58,14 +57,17 @@ unsigned long missed_heart_beats = 0;
 static unsigned long r4k_offset; /* Amount to increment compare reg each time */
 static unsigned long r4k_cur;    /* What counter should be at next timer irq */
 int	no_au1xxx_32khz;
-void	(*au1k_wait_ptr)(void);
+extern int allow_au1k_wait; /* default off for CP0 Counter */
 
 /* Cycle counter value at the previous timer interrupt.. */
 static unsigned int timerhi = 0, timerlo = 0;
 
 #ifdef CONFIG_PM
-#define MATCH20_INC 328
-extern void startup_match20_interrupt(void);
+#if HZ < 100 || HZ > 1000
+#error "unsupported HZ value! Must be in [100,1000]"
+#endif
+#define MATCH20_INC (328*100/HZ) /* magic number 328 is for HZ=100... */
+extern void startup_match20_interrupt(irqreturn_t (*handler)(int, void *, struct pt_regs *));
 static unsigned long last_pc0, last_match20;
 #endif
 
@@ -117,17 +119,16 @@ null:
 }
 
 #ifdef CONFIG_PM
-void counter0_irq(int irq, void *dev_id, struct pt_regs *regs)
+irqreturn_t counter0_irq(int irq, void *dev_id, struct pt_regs *regs)
 {
 	unsigned long pc0;
 	int time_elapsed;
 	static int jiffie_drift = 0;
 
-	kstat.irqs[0][irq]++;
 	if (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20) {
 		/* should never happen! */
-		printk(KERN_WARNING "counter 0 w status eror\n");
-		return;
+		printk(KERN_WARNING "counter 0 w status error\n");
+		return IRQ_NONE;
 	}
 
 	pc0 = au_readl(SYS_TOYREAD);
@@ -164,6 +165,8 @@ void counter0_irq(int irq, void *dev_id, struct pt_regs *regs)
 		update_process_times(user_mode(regs));
 #endif
 	}
+
+	return IRQ_HANDLED;
 }
 
 /* When we wakeup from sleep, we have to "catch up" on all of the
@@ -388,7 +391,6 @@ void au1xxx_timer_setup(struct irqaction *irq)
 {
         unsigned int est_freq;
 	extern unsigned long (*do_gettimeoffset)(void);
-	extern void au1k_wait(void);
 
 	printk("calculating r4koff... ");
 	r4k_offset = cal_r4koff();
@@ -441,18 +443,18 @@ void au1xxx_timer_setup(struct irqaction *irq)
 		au_sync();
 		while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20);
 
-		/* setup match20 to interrupt once every 10ms */
+		/* setup match20 to interrupt once every HZ */
 		last_pc0 = last_match20 = au_readl(SYS_TOYREAD);
 		au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2);
 		au_sync();
 		while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20);
-		startup_match20_interrupt();
+		startup_match20_interrupt(counter0_irq);
 
 		do_gettimeoffset = do_fast_pm_gettimeoffset;
 
 		/* We can use the real 'wait' instruction.
 		*/
-		au1k_wait_ptr = au1k_wait;
+		allow_au1k_wait = 1;
 	}
 
 #else
diff --git a/arch/mips/au1000/common/usbdev.c b/arch/mips/au1000/common/usbdev.c
index 447a9a4612a8..2cab7629702c 100644
--- a/arch/mips/au1000/common/usbdev.c
+++ b/arch/mips/au1000/common/usbdev.c
@@ -348,7 +348,7 @@ endpoint_stall(endpoint_t * ep)
 {
 	u32 cs;
 
-	warn(__FUNCTION__);
+	warn("%s", __FUNCTION__);
 
 	cs = au_readl(ep->reg->ctrl_stat) | USBDEV_CS_STALL;
 	au_writel(cs, ep->reg->ctrl_stat);
@@ -360,7 +360,7 @@ endpoint_unstall(endpoint_t * ep)
 {
 	u32 cs;
 
-	warn(__FUNCTION__);
+	warn("%s", __FUNCTION__);
 
 	cs = au_readl(ep->reg->ctrl_stat) & ~USBDEV_CS_STALL;
 	au_writel(cs, ep->reg->ctrl_stat);
@@ -1005,11 +1005,11 @@ process_ep0_receive (struct usb_dev* dev)
 #endif
 		dev->ep0_stage = SETUP_STAGE;
 		break;
-		}
+	}
 
 	spin_unlock(&ep0->lock);
-		// we're done processing the packet, free it
-		kfree(pkt);
+	// we're done processing the packet, free it
+	kfree(pkt);
 }
 
 
@@ -1072,8 +1072,7 @@ dma_done_ep0_intr(int irq, void *dev_id, struct pt_regs *regs)
 			clear_dma_done1(ep0->indma);
 
 		pkt = send_packet_complete(ep0);
-		if (pkt)
-			kfree(pkt);
+		kfree(pkt);
 	}
 
 	/*
@@ -1302,8 +1301,7 @@ usbdev_exit(void)
 		endpoint_flush(ep);
 	}
 
-	if (usbdev.full_conf_desc)
-		kfree(usbdev.full_conf_desc);
+	kfree(usbdev.full_conf_desc);
 }
 
 int
diff --git a/arch/mips/au1000/csb250/init.c b/arch/mips/au1000/csb250/init.c
index bd99733abc0b..a4898b1bc66a 100644
--- a/arch/mips/au1000/csb250/init.c
+++ b/arch/mips/au1000/csb250/init.c
@@ -35,7 +35,6 @@
 #include <asm/bootinfo.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
-#include <linux/sched.h>
 
 int prom_argc;
 char **prom_argv, **prom_envp;
diff --git a/arch/mips/au1000/db1x00/board_setup.c b/arch/mips/au1000/db1x00/board_setup.c
index ac05ba0ff63f..f00ec3b175d8 100644
--- a/arch/mips/au1000/db1x00/board_setup.c
+++ b/arch/mips/au1000/db1x00/board_setup.c
@@ -45,13 +45,12 @@
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-db1x00/db1x00.h>
 
-/* not correct for db1550 */
-static BCSR * const bcsr = (BCSR *)0xAE000000;
+static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
 
 void board_reset (void)
 {
 	/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
-	au_writel(0x00000000, 0xAE00001C);
+	bcsr->swreset = 0x0000;
 }
 
 void __init board_setup(void)
@@ -75,7 +74,7 @@ void __init board_setup(void)
 	bcsr->resets |= BCSR_RESETS_IRDA_MODE_OFF;
 	au_sync();
 #endif
-	au_writel(0, 0xAE000010); /* turn off pcmcia power */
+	bcsr->pcmcia = 0x0000; /* turn off PCMCIA power */
 
 #ifdef CONFIG_MIPS_MIRAGE
 	/* enable GPIO[31:0] inputs */
diff --git a/arch/mips/au1000/db1x00/init.c b/arch/mips/au1000/db1x00/init.c
index 4b9d5e46edbb..41e0522f3cf1 100644
--- a/arch/mips/au1000/db1x00/init.c
+++ b/arch/mips/au1000/db1x00/init.c
@@ -61,7 +61,17 @@ void __init prom_init(void)
 	prom_envp = (char **) fw_arg2;
 
 	mips_machgroup = MACH_GROUP_ALCHEMY;
-	mips_machtype = MACH_DB1000;	/* set the platform # */
+
+	/* Set the platform # */
+#if	defined (CONFIG_MIPS_DB1550)
+	mips_machtype = MACH_DB1550;
+#elif	defined (CONFIG_MIPS_DB1500)
+	mips_machtype = MACH_DB1500;
+#elif	defined (CONFIG_MIPS_DB1100)
+	mips_machtype = MACH_DB1100;
+#else
+	mips_machtype = MACH_DB1000;
+#endif
 
 	prom_init_cmdline();
 
diff --git a/arch/mips/au1000/db1x00/irqmap.c b/arch/mips/au1000/db1x00/irqmap.c
index 8f6ef0dbe1f8..f63024a9893a 100644
--- a/arch/mips/au1000/db1x00/irqmap.c
+++ b/arch/mips/au1000/db1x00/irqmap.c
@@ -48,6 +48,38 @@
 #include <asm/system.h>
 #include <asm/mach-au1x00/au1000.h>
 
+#ifdef CONFIG_MIPS_DB1500
+char irq_tab_alchemy[][5] __initdata = {
+ [12] =	{ -1, INTA, INTX, INTX, INTX},   /* IDSEL 12 - HPT371   */
+ [13] =	{ -1, INTA, INTB, INTC, INTD},   /* IDSEL 13 - PCI slot */
+};
+#endif
+
+#ifdef CONFIG_MIPS_BOSPORUS
+char irq_tab_alchemy[][5] __initdata = {
+ [11] =	{ -1, INTA, INTB, INTX, INTX},   /* IDSEL 11 - miniPCI  */
+ [12] =	{ -1, INTA, INTX, INTX, INTX},   /* IDSEL 12 - SN1741   */
+ [13] =	{ -1, INTA, INTB, INTC, INTD},   /* IDSEL 13 - PCI slot */
+};
+#endif
+
+#ifdef CONFIG_MIPS_MIRAGE
+char irq_tab_alchemy[][5] __initdata = {
+ [11] =	{ -1, INTD, INTX, INTX, INTX},   /* IDSEL 11 - SMI VGX */
+ [12] =	{ -1, INTX, INTX, INTC, INTX},   /* IDSEL 12 - PNX1300 */
+ [13] =	{ -1, INTA, INTB, INTX, INTX},   /* IDSEL 13 - miniPCI */
+};
+#endif
+
+#ifdef CONFIG_MIPS_DB1550
+char irq_tab_alchemy[][5] __initdata = {
+ [11] =	{ -1, INTC, INTX, INTX, INTX},   /* IDSEL 11 - on-board HPT371    */
+ [12] =	{ -1, INTB, INTC, INTD, INTA},   /* IDSEL 12 - PCI slot 2 (left)  */
+ [13] =	{ -1, INTA, INTB, INTC, INTD},   /* IDSEL 13 - PCI slot 1 (right) */
+};
+#endif
+
+
 au1xxx_irq_map_t au1xxx_irq_map[] = {
 
 #ifndef CONFIG_MIPS_MIRAGE
diff --git a/arch/mips/au1000/db1x00/mirage_ts.c b/arch/mips/au1000/db1x00/mirage_ts.c
index ade35e432004..c29852c24b4f 100644
--- a/arch/mips/au1000/db1x00/mirage_ts.c
+++ b/arch/mips/au1000/db1x00/mirage_ts.c
@@ -102,15 +102,15 @@ static struct {
 } mirage_ts_cal =
 {
 #if 0
-	xscale:   84,
-	xtrans: -157,
-	yscale:   66,
-	ytrans: -150,
+	.xscale   = 84,
+	.xtrans = -157,
+	.yscale   = 66,
+	.ytrans = -150,
 #else
-	xscale:   84,
-	xtrans: -150,
-	yscale:   66,
-	ytrans: -146,
+	.xscale   = 84,
+	.xtrans = -150,
+	.yscale   = 66,
+	.ytrans = -146,
 #endif
 };
 
diff --git a/arch/mips/au1000/hydrogen3/init.c b/arch/mips/au1000/hydrogen3/init.c
index 8cc9879dd582..01ab28483959 100644
--- a/arch/mips/au1000/hydrogen3/init.c
+++ b/arch/mips/au1000/hydrogen3/init.c
@@ -37,7 +37,6 @@
 #include <linux/config.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
-#include <linux/sched.h>
 
 int prom_argc;
 char **prom_argv, **prom_envp;
diff --git a/arch/mips/au1000/mtx-1/init.c b/arch/mips/au1000/mtx-1/init.c
index 02e7dbcff727..88f2b6d97281 100644
--- a/arch/mips/au1000/mtx-1/init.c
+++ b/arch/mips/au1000/mtx-1/init.c
@@ -33,7 +33,6 @@
 #include <linux/sched.h>
 #include <linux/init.h>
 #include <linux/mm.h>
-#include <linux/sched.h>
 #include <linux/bootmem.h>
 #include <asm/addrspace.h>
 #include <asm/bootinfo.h>
diff --git a/arch/mips/au1000/mtx-1/irqmap.c b/arch/mips/au1000/mtx-1/irqmap.c
index ddcb9d089dc1..f9a0a8b9def2 100644
--- a/arch/mips/au1000/mtx-1/irqmap.c
+++ b/arch/mips/au1000/mtx-1/irqmap.c
@@ -47,6 +47,17 @@
 #include <asm/system.h>
 #include <asm/mach-au1x00/au1000.h>
 
+char irq_tab_alchemy[][5] __initdata = {
+ [0] = { -1, INTA, INTB, INTX, INTX},   /* IDSEL 00 - AdapterA-Slot0 (top)    */
+ [1] = { -1, INTB, INTA, INTX, INTX},   /* IDSEL 01 - AdapterA-Slot1 (bottom) */
+ [2] = { -1, INTC, INTD, INTX, INTX},   /* IDSEL 02 - AdapterB-Slot0 (top)    */
+ [3] = { -1, INTD, INTC, INTX, INTX},   /* IDSEL 03 - AdapterB-Slot1 (bottom) */
+ [4] = { -1, INTA, INTB, INTX, INTX},   /* IDSEL 04 - AdapterC-Slot0 (top)    */
+ [5] = { -1, INTB, INTA, INTX, INTX},   /* IDSEL 05 - AdapterC-Slot1 (bottom) */
+ [6] = { -1, INTC, INTD, INTX, INTX},   /* IDSEL 06 - AdapterD-Slot0 (top)    */
+ [7] = { -1, INTD, INTC, INTX, INTX},   /* IDSEL 07 - AdapterD-Slot1 (bottom) */
+};
+
 au1xxx_irq_map_t au1xxx_irq_map[] = {
        { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
        { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
diff --git a/arch/mips/au1000/pb1000/init.c b/arch/mips/au1000/pb1000/init.c
index 34713c5df0d7..e9fa1bab81f3 100644
--- a/arch/mips/au1000/pb1000/init.c
+++ b/arch/mips/au1000/pb1000/init.c
@@ -65,5 +65,4 @@ void __init prom_init(void)
 		memsize = simple_strtol(memsize_str, NULL, 0);
 	}
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
-	return 0;
 }
diff --git a/arch/mips/au1000/pb1200/Makefile b/arch/mips/au1000/pb1200/Makefile
new file mode 100644
index 000000000000..22b673cf55af
--- /dev/null
+++ b/arch/mips/au1000/pb1200/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Alchemy Semiconductor PB1200 board.
+#
+
+lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/au1000/pb1200/board_setup.c b/arch/mips/au1000/pb1200/board_setup.c
new file mode 100644
index 000000000000..a45b17538ac9
--- /dev/null
+++ b/arch/mips/au1000/pb1200/board_setup.c
@@ -0,0 +1,193 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	Alchemy Pb1200/Db1200 board setup.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/mc146818rtc.h>
+#include <linux/delay.h>
+
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX)
+#include <linux/ide.h>
+#endif
+
+#include <asm/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/reboot.h>
+#include <asm/pgtable.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
+
+#ifdef CONFIG_MIPS_PB1200
+#include <asm/mach-pb1x00/pb1200.h>
+#endif
+
+#ifdef CONFIG_MIPS_DB1200
+#include <asm/mach-db1x00/db1200.h>
+#define PB1200_ETH_INT DB1200_ETH_INT
+#define PB1200_IDE_INT DB1200_IDE_INT
+#endif
+
+extern void _board_init_irq(void);
+extern void	(*board_init_irq)(void);
+
+void board_reset (void)
+{
+	bcsr->resets = 0;
+	bcsr->system = 0;
+}
+
+void __init board_setup(void)
+{
+	char *argptr = NULL;
+	u32 pin_func;
+
+#if 0
+	/* Enable PSC1 SYNC for AC97.  Normaly done in audio driver,
+	 * but it is board specific code, so put it here.
+	 */
+	pin_func = au_readl(SYS_PINFUNC);
+	au_sync();
+	pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
+	au_writel(pin_func, SYS_PINFUNC);
+
+	au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */
+	au_sync();
+#endif
+
+#if defined(CONFIG_I2C_AU1550)
+	{
+	u32 freq0, clksrc;
+
+	/* Select SMBUS in CPLD */
+	bcsr->resets &= ~(BCSR_RESETS_PCS0MUX);
+
+	pin_func = au_readl(SYS_PINFUNC);
+	au_sync();
+	pin_func &= ~(3<<17 | 1<<4);
+	/* Set GPIOs correctly */
+	pin_func |= 2<<17;
+	au_writel(pin_func, SYS_PINFUNC);
+	au_sync();
+
+	/* The i2c driver depends on 50Mhz clock */
+	freq0 = au_readl(SYS_FREQCTRL0);
+	au_sync();
+	freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1);
+	freq0 |= (3<<SYS_FC_FRDIV1_BIT);
+	/* 396Mhz / (3+1)*2 == 49.5Mhz */
+	au_writel(freq0, SYS_FREQCTRL0);
+	au_sync();
+	freq0 |= SYS_FC_FE1;
+	au_writel(freq0, SYS_FREQCTRL0);
+	au_sync();
+
+	clksrc = au_readl(SYS_CLKSRC);
+	au_sync();
+	clksrc &= ~0x01f00000;
+	/* bit 22 is EXTCLK0 for PSC0 */
+	clksrc |= (0x3 << 22);
+	au_writel(clksrc, SYS_CLKSRC);
+	au_sync();
+	}
+#endif
+
+#ifdef CONFIG_FB_AU1200
+	argptr = prom_getcmdline();
+#ifdef CONFIG_MIPS_PB1200
+	strcat(argptr, " video=au1200fb:panel:bs");
+#endif
+#ifdef CONFIG_MIPS_DB1200
+	strcat(argptr, " video=au1200fb:panel:bs");
+#endif
+#endif
+
+	/* The Pb1200 development board uses external MUX for PSC0 to
+	support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
+	*/
+#if defined(CONFIG_AU1XXX_PSC_SPI) && defined(CONFIG_I2C_AU1550)
+	#error I2C and SPI are mutually exclusive. Both are physically connected to PSC0.\
+			Refer to Pb1200/Db1200 documentation.
+#elif defined( CONFIG_AU1XXX_PSC_SPI )
+	bcsr->resets |= BCSR_RESETS_PCS0MUX;
+	/*Hard Coding Value to enable Temp Sensors [bit 14] Value for SOC Au1200. Pls refer documentation*/
+	  bcsr->resets =0x900f;
+#elif defined( CONFIG_I2C_AU1550 )
+	bcsr->resets &= (~BCSR_RESETS_PCS0MUX);
+#endif
+	au_sync();
+
+#ifdef CONFIG_MIPS_PB1200
+	printk("AMD Alchemy Pb1200 Board\n");
+#endif
+#ifdef CONFIG_MIPS_DB1200
+	printk("AMD Alchemy Db1200 Board\n");
+#endif
+
+	/* Setup Pb1200 External Interrupt Controller */
+	{
+		extern void (*board_init_irq)(void);
+		extern void _board_init_irq(void);
+		board_init_irq = _board_init_irq;
+	}
+}
+
+int
+board_au1200fb_panel (void)
+{
+	BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+	int p;
+
+	p = bcsr->switches;
+	p >>= 8;
+	p &= 0x0F;
+	return p;
+}
+
+int
+board_au1200fb_panel_init (void)
+{
+	/* Apply power */
+    BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+	bcsr->board |= (BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL);
+	/*printk("board_au1200fb_panel_init()\n"); */
+	return 0;
+}
+
+int
+board_au1200fb_panel_shutdown (void)
+{
+	/* Remove power */
+    BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+	bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL);
+	/*printk("board_au1200fb_panel_shutdown()\n"); */
+	return 0;
+}
+
diff --git a/arch/mips/au1000/pb1200/init.c b/arch/mips/au1000/pb1200/init.c
new file mode 100644
index 000000000000..27f09e374e15
--- /dev/null
+++ b/arch/mips/au1000/pb1200/init.c
@@ -0,0 +1,69 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	PB1200 board setup
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+
+int prom_argc;
+char **prom_argv, **prom_envp;
+extern void  __init prom_init_cmdline(void);
+extern char *prom_getenv(char *envname);
+
+const char *get_system_type(void)
+{
+	return "Alchemy Pb1200";
+}
+
+void __init prom_init(void)
+{
+	unsigned char *memsize_str;
+	unsigned long memsize;
+
+	prom_argc = (int) fw_arg0;
+	prom_argv = (char **) fw_arg1;
+	prom_envp = (char **) fw_arg2;
+
+	mips_machgroup = MACH_GROUP_ALCHEMY;
+	mips_machtype = MACH_PB1200;
+
+	prom_init_cmdline();
+	memsize_str = prom_getenv("memsize");
+	if (!memsize_str) {
+		memsize = 0x08000000;
+	} else {
+		memsize = simple_strtol(memsize_str, NULL, 0);
+	}
+	add_memory_region(0, memsize, BOOT_MEM_RAM);
+}
diff --git a/arch/mips/au1000/pb1200/irqmap.c b/arch/mips/au1000/pb1200/irqmap.c
new file mode 100644
index 000000000000..59e70e5cf325
--- /dev/null
+++ b/arch/mips/au1000/pb1200/irqmap.c
@@ -0,0 +1,182 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *	Au1xxx irq map table
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
+ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
+ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/delay.h>
+
+#include <asm/bitops.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+#include <asm/mach-au1x00/au1000.h>
+
+#ifdef CONFIG_MIPS_PB1200
+#include <asm/mach-pb1x00/pb1200.h>
+#endif
+
+#ifdef CONFIG_MIPS_DB1200
+#include <asm/mach-db1x00/db1200.h>
+#define PB1200_INT_BEGIN DB1200_INT_BEGIN
+#define PB1200_INT_END DB1200_INT_END
+#endif
+
+au1xxx_irq_map_t au1xxx_irq_map[] = {
+	{ AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 }, // This is exteranl interrupt cascade
+};
+
+int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
+
+/*
+ *	Support for External interrupts on the PbAu1200 Development platform.
+ */
+static volatile int pb1200_cascade_en=0;
+
+irqreturn_t pb1200_cascade_handler( int irq, void *dev_id, struct pt_regs *regs)
+{
+	unsigned short bisr = bcsr->int_status;
+	int extirq_nr = 0;
+
+	/* Clear all the edge interrupts. This has no effect on level */
+	bcsr->int_status = bisr;
+	for( ; bisr; bisr &= (bisr-1) )
+	{
+		extirq_nr = (PB1200_INT_BEGIN-1) + au_ffs(bisr);
+		/* Ack and dispatch IRQ */
+		do_IRQ(extirq_nr,regs);
+	}
+	return IRQ_RETVAL(1);
+}
+
+inline void pb1200_enable_irq(unsigned int irq_nr)
+{
+	bcsr->intset_mask = 1<<(irq_nr - PB1200_INT_BEGIN);
+	bcsr->intset = 1<<(irq_nr - PB1200_INT_BEGIN);
+}
+
+inline void pb1200_disable_irq(unsigned int irq_nr)
+{
+	bcsr->intclr_mask = 1<<(irq_nr - PB1200_INT_BEGIN);
+	bcsr->intclr = 1<<(irq_nr - PB1200_INT_BEGIN);
+}
+
+static unsigned int pb1200_startup_irq( unsigned int irq_nr )
+{
+	if (++pb1200_cascade_en == 1)
+	{
+		request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
+			0, "Pb1200 Cascade", (void *)&pb1200_cascade_handler );
+#ifdef CONFIG_MIPS_PB1200
+    /* We have a problem with CPLD rev3. Enable a workaround */
+	if( ((bcsr->whoami & BCSR_WHOAMI_CPLD)>>4) <= 3)
+	{
+		printk("\nWARNING!!!\n");
+		printk("\nWARNING!!!\n");
+		printk("\nWARNING!!!\n");
+		printk("\nWARNING!!!\n");
+		printk("\nWARNING!!!\n");
+		printk("\nWARNING!!!\n");
+		printk("Pb1200 must be at CPLD rev4. Please have Pb1200\n");
+		printk("updated to latest revision. This software will not\n");
+		printk("work on anything less than CPLD rev4\n");
+		printk("\nWARNING!!!\n");
+		printk("\nWARNING!!!\n");
+		printk("\nWARNING!!!\n");
+		printk("\nWARNING!!!\n");
+		printk("\nWARNING!!!\n");
+		printk("\nWARNING!!!\n");
+		while(1);
+	}
+#endif
+	}
+	pb1200_enable_irq(irq_nr);
+	return 0;
+}
+
+static void pb1200_shutdown_irq( unsigned int irq_nr )
+{
+	pb1200_disable_irq(irq_nr);
+	if (--pb1200_cascade_en == 0)
+	{
+		free_irq(AU1000_GPIO_7,&pb1200_cascade_handler );
+	}
+	return;
+}
+
+static inline void pb1200_mask_and_ack_irq(unsigned int irq_nr)
+{
+	pb1200_disable_irq( irq_nr );
+}
+
+static void pb1200_end_irq(unsigned int irq_nr)
+{
+	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
+		pb1200_enable_irq(irq_nr);
+	}
+}
+
+static struct hw_interrupt_type external_irq_type =
+{
+#ifdef CONFIG_MIPS_PB1200
+	"Pb1200 Ext",
+#endif
+#ifdef CONFIG_MIPS_DB1200
+	"Db1200 Ext",
+#endif
+	pb1200_startup_irq,
+	pb1200_shutdown_irq,
+	pb1200_enable_irq,
+	pb1200_disable_irq,
+	pb1200_mask_and_ack_irq,
+	pb1200_end_irq,
+	NULL
+};
+
+void _board_init_irq(void)
+{
+	int irq_nr;
+
+	for (irq_nr = PB1200_INT_BEGIN; irq_nr <= PB1200_INT_END; irq_nr++)
+	{
+		irq_desc[irq_nr].handler = &external_irq_type;
+		pb1200_disable_irq(irq_nr);
+	}
+
+	/* GPIO_7 can not be hooked here, so it is hooked upon first
+	request of any source attached to the cascade */
+}
+
diff --git a/arch/mips/au1000/pb1500/irqmap.c b/arch/mips/au1000/pb1500/irqmap.c
index 476e25001681..8cb76c2edb5e 100644
--- a/arch/mips/au1000/pb1500/irqmap.c
+++ b/arch/mips/au1000/pb1500/irqmap.c
@@ -47,6 +47,11 @@
 #include <asm/system.h>
 #include <asm/mach-au1x00/au1000.h>
 
+char irq_tab_alchemy[][5] __initdata = {
+ [12] = { -1, INTA, INTX, INTX, INTX},   /* IDSEL 12 - HPT370   */
+ [13] = { -1, INTA, INTB, INTC, INTD},   /* IDSEL 13 - PCI slot */
+};
+
 au1xxx_irq_map_t au1xxx_irq_map[] = {
 	{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
 	{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
diff --git a/arch/mips/au1000/pb1550/irqmap.c b/arch/mips/au1000/pb1550/irqmap.c
index 889d4949ee76..47c7a1c19f4b 100644
--- a/arch/mips/au1000/pb1550/irqmap.c
+++ b/arch/mips/au1000/pb1550/irqmap.c
@@ -47,6 +47,11 @@
 #include <asm/system.h>
 #include <asm/mach-au1x00/au1000.h>
 
+char irq_tab_alchemy[][5] __initdata = {
+ [12] =	{ -1, INTB, INTC, INTD, INTA},   /* IDSEL 12 - PCI slot 2 (left)  */
+ [13] =	{ -1, INTA, INTB, INTC, INTD},   /* IDSEL 13 - PCI slot 1 (right) */
+};
+
 au1xxx_irq_map_t au1xxx_irq_map[] = {
 	{ AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 },
 	{ AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 },
diff --git a/arch/mips/boot/.gitignore b/arch/mips/boot/.gitignore
new file mode 100644
index 000000000000..ba63401c6e10
--- /dev/null
+++ b/arch/mips/boot/.gitignore
@@ -0,0 +1,4 @@
+mkboot
+elf2ecoff
+zImage
+zImage.tmp
diff --git a/arch/mips/boot/Makefile b/arch/mips/boot/Makefile
index efbeac326815..0dc84417bf49 100644
--- a/arch/mips/boot/Makefile
+++ b/arch/mips/boot/Makefile
@@ -33,6 +33,9 @@ vmlinux.ecoff: $(obj)/elf2ecoff $(VMLINUX)
 $(obj)/elf2ecoff: $(obj)/elf2ecoff.c
 	$(HOSTCC) -o $@ $^
 
+vmlinux.bin: $(VMLINUX)
+	$(OBJCOPY) -O binary $(strip-flags) $(VMLINUX) $(obj)/vmlinux.bin
+
 vmlinux.srec: $(VMLINUX)
 	$(OBJCOPY) -S -O srec $(strip-flags) $(VMLINUX) $(obj)/vmlinux.srec
 
@@ -45,5 +48,6 @@ archhelp:
 
 clean-files += addinitrd \
 	       elf2ecoff \
+	       vmlinux.bin \
 	       vmlinux.ecoff \
 	       vmlinux.srec
diff --git a/arch/mips/cobalt/Makefile b/arch/mips/cobalt/Makefile
index a5e6554b2326..3b6b7579d1de 100644
--- a/arch/mips/cobalt/Makefile
+++ b/arch/mips/cobalt/Makefile
@@ -2,6 +2,6 @@
 # Makefile for the Cobalt micro systems family specific parts of the kernel
 #
 
-obj-y	 := irq.o int-handler.o reset.o setup.o promcon.o
+obj-y	 := irq.o int-handler.o reset.o setup.o
 
 EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/cobalt/int-handler.S b/arch/mips/cobalt/int-handler.S
index 1a21dec1b3ca..f92608e8d84f 100644
--- a/arch/mips/cobalt/int-handler.S
+++ b/arch/mips/cobalt/int-handler.S
@@ -18,8 +18,8 @@
 		SAVE_ALL
 		CLI
 
-		la	ra, ret_from_irq
-		move	a1, sp
+		PTR_LA	ra, ret_from_irq
+		move	a0, sp
 		j	cobalt_irq
 
 		END(cobalt_handle_int)
diff --git a/arch/mips/cobalt/irq.c b/arch/mips/cobalt/irq.c
index 6d2a81581397..0d90851f925e 100644
--- a/arch/mips/cobalt/irq.c
+++ b/arch/mips/cobalt/irq.c
@@ -10,6 +10,8 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
 
 #include <asm/i8259.h>
 #include <asm/irq_cpu.h>
@@ -25,8 +27,8 @@ extern void cobalt_handle_int(void);
  * the CPU interrupt lines, and ones that come in on the via chip. The CPU
  * mappings are:
  *
- *    16,  - Software interrupt 0 (unused)	IE_SW0
- *    17   - Software interrupt 1 (unused)	IE_SW0
+ *    16   - Software interrupt 0 (unused)	IE_SW0
+ *    17   - Software interrupt 1 (unused)	IE_SW1
  *    18   - Galileo chip (timer)		IE_IRQ0
  *    19   - Tulip 0 + NCR SCSI			IE_IRQ1
  *    20   - Tulip 1				IE_IRQ2
@@ -42,61 +44,94 @@ extern void cobalt_handle_int(void);
  *    15  - IDE1
  */
 
-asmlinkage void cobalt_irq(struct pt_regs *regs)
+static inline void galileo_irq(struct pt_regs *regs)
 {
-	unsigned int pending = read_c0_status() & read_c0_cause();
-
-	if (pending & CAUSEF_IP2) {			/* int 18 */
-		unsigned long irq_src = GALILEO_INL(GT_INTRCAUSE_OFS);
-
-		/* Check for timer irq ... */
-		if (irq_src & GALILEO_T0EXP) {
-			/* Clear the int line */
-			GALILEO_OUTL(0, GT_INTRCAUSE_OFS);
-			do_IRQ(COBALT_TIMER_IRQ, regs);
-		}
-		return;
-	}
+	unsigned int mask, pending, devfn;
 
-	if (pending & CAUSEF_IP6) {			/* int 22 */
-		int irq = i8259_irq();
+	mask = GALILEO_INL(GT_INTRMASK_OFS);
+	pending = GALILEO_INL(GT_INTRCAUSE_OFS) & mask;
 
-		if (irq >= 0)
-			do_IRQ(irq, regs);
-		return;
-	}
+	if (pending & GALILEO_INTR_T0EXP) {
 
-	if (pending & CAUSEF_IP3) {			/* int 19 */
-		do_IRQ(COBALT_ETH0_IRQ, regs);
-		return;
-	}
+		GALILEO_OUTL(~GALILEO_INTR_T0EXP, GT_INTRCAUSE_OFS);
+		do_IRQ(COBALT_GALILEO_IRQ, regs);
 
-	if (pending & CAUSEF_IP4) {			/* int 20 */
-		do_IRQ(COBALT_ETH1_IRQ, regs);
-		return;
-	}
+	} else if (pending & GALILEO_INTR_RETRY_CTR) {
 
-	if (pending & CAUSEF_IP5) {			/* int 21 */
-		do_IRQ(COBALT_SERIAL_IRQ, regs);
-		return;
-	}
+		devfn = GALILEO_INL(GT_PCI0_CFGADDR_OFS) >> 8;
+		GALILEO_OUTL(~GALILEO_INTR_RETRY_CTR, GT_INTRCAUSE_OFS);
+		printk(KERN_WARNING "Galileo: PCI retry count exceeded (%02x.%u)\n",
+			PCI_SLOT(devfn), PCI_FUNC(devfn));
+
+	} else {
 
-	if (pending & CAUSEF_IP7) {			/* int 23 */
-		do_IRQ(COBALT_QUBE_SLOT_IRQ, regs);
-		return;
+		GALILEO_OUTL(mask & ~pending, GT_INTRMASK_OFS);
+		printk(KERN_WARNING "Galileo: masking unexpected interrupt %08x\n", pending);
 	}
 }
 
+static inline void via_pic_irq(struct pt_regs *regs)
+{
+	int irq;
+
+	irq = i8259_irq();
+	if (irq >= 0)
+		do_IRQ(irq, regs);
+}
+
+asmlinkage void cobalt_irq(struct pt_regs *regs)
+{
+	unsigned pending;
+
+	pending = read_c0_status() & read_c0_cause();
+
+	if (pending & CAUSEF_IP2)			/* COBALT_GALILEO_IRQ (18) */
+
+		galileo_irq(regs);
+
+	else if (pending & CAUSEF_IP6)			/* COBALT_VIA_IRQ (22) */
+
+		via_pic_irq(regs);
+
+	else if (pending & CAUSEF_IP3)			/* COBALT_ETH0_IRQ (19) */
+
+		do_IRQ(COBALT_CPU_IRQ + 3, regs);
+
+	else if (pending & CAUSEF_IP4)			/* COBALT_ETH1_IRQ (20) */
+
+		do_IRQ(COBALT_CPU_IRQ + 4, regs);
+
+	else if (pending & CAUSEF_IP5)			/* COBALT_SERIAL_IRQ (21) */
+
+		do_IRQ(COBALT_CPU_IRQ + 5, regs);
+
+	else if (pending & CAUSEF_IP7)			/* IRQ 23 */
+
+		do_IRQ(COBALT_CPU_IRQ + 7, regs);
+}
+
+static struct irqaction irq_via = {
+	no_action, 0, { { 0, } }, "cascade", NULL, NULL
+};
+
 void __init arch_init_irq(void)
 {
+	/*
+	 * Mask all Galileo interrupts. The Galileo
+	 * handler is set in cobalt_timer_setup()
+	 */
+	GALILEO_OUTL(0, GT_INTRMASK_OFS);
+
 	set_except_vector(0, cobalt_handle_int);
 
 	init_i8259_irqs();				/*  0 ... 15 */
-	mips_cpu_irq_init(16);				/* 16 ... 23 */
+	mips_cpu_irq_init(COBALT_CPU_IRQ);		/* 16 ... 23 */
 
 	/*
 	 * Mask all cpu interrupts
 	 *  (except IE4, we already masked those at VIA level)
 	 */
 	change_c0_status(ST0_IM, IE_IRQ4);
+
+	setup_irq(COBALT_VIA_IRQ, &irq_via);
 }
diff --git a/arch/mips/cobalt/promcon.c b/arch/mips/cobalt/promcon.c
deleted file mode 100644
index f03df761e9f1..000000000000
--- a/arch/mips/cobalt/promcon.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * PROM console for Cobalt Raq2
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995, 1996, 1997 by Ralf Baechle
- * Copyright (C) 2001 by Liam Davies (ldavies@agile.tv)
- *
- */
-
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/kdev_t.h>
-#include <linux/serial_reg.h>
-
-#include <asm/delay.h>
-#include <asm/serial.h>
-#include <asm/io.h>
-
-static unsigned long port = 0xc800000;
-
-static __inline__ void ns16550_cons_put_char(char ch, unsigned long ioaddr)
-{
-	char lsr;
-
-	do {
-		lsr = inb(ioaddr + UART_LSR);
-	} while ((lsr & (UART_LSR_TEMT | UART_LSR_THRE)) != (UART_LSR_TEMT | UART_LSR_THRE));
-	outb(ch, ioaddr + UART_TX);
-}
-
-static __inline__ char ns16550_cons_get_char(unsigned long ioaddr)
-{
-	while ((inb(ioaddr + UART_LSR) & UART_LSR_DR) == 0)
-		udelay(1);
-	return inb(ioaddr + UART_RX);
-}
-
-void ns16550_console_write(struct console *co, const char *s, unsigned count)
-{
-	char lsr, ier;
-	unsigned i;
-
-	ier = inb(port + UART_IER);
-	outb(0x00, port + UART_IER);
-	for (i=0; i < count; i++, s++) {
-
-		if(*s == '\n')
-			ns16550_cons_put_char('\r', port);
-		ns16550_cons_put_char(*s, port);
-	}
-
-	do {
-		lsr = inb(port + UART_LSR);
-   	} while ((lsr & (UART_LSR_TEMT | UART_LSR_THRE)) != (UART_LSR_TEMT | UART_LSR_THRE));
-
-	outb(ier, port + UART_IER);
-}
-
-char getDebugChar(void)
-{
-	return ns16550_cons_get_char(port);
-}
-
-void putDebugChar(char kgdb_char)
-{
-	ns16550_cons_put_char(kgdb_char, port);
-}
-
-static struct console ns16550_console = {
-    .name	= "prom",
-    .setup	= NULL,
-    .write	= ns16550_console_write,
-    .flags	= CON_PRINTBUFFER,
-    .index	= -1,
-};
-
-static int __init ns16550_setup_console(void)
-{
-	register_console(&ns16550_console);
-
-	return 0;
-}
-
-console_initcall(ns16550_setup_console);
diff --git a/arch/mips/cobalt/reset.c b/arch/mips/cobalt/reset.c
index 084c8e59f42c..805a0e88507b 100644
--- a/arch/mips/cobalt/reset.c
+++ b/arch/mips/cobalt/reset.c
@@ -16,48 +16,45 @@
 #include <asm/reboot.h>
 #include <asm/system.h>
 #include <asm/mipsregs.h>
+#include <asm/cobalt/cobalt.h>
 
-void cobalt_machine_restart(char *command)
+void cobalt_machine_halt(void)
 {
-	*(volatile char *)0xbc000000 = 0x0f;
+	int state, last, diff;
+	unsigned long mark;
 
 	/*
-	 * Ouch, we're still alive ... This time we take the silver bullet ...
-	 * ... and find that we leave the hardware in a state in which the
-	 * kernel in the flush locks up somewhen during of after the PCI
-	 * detection stuff.
+	 * turn off bar on Qube, flash power off LED on RaQ (0.5Hz)
+	 *
+	 * restart if ENTER and SELECT are pressed
 	 */
-	set_c0_status(ST0_BEV | ST0_ERL);
-	change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
-	flush_cache_all();
-	write_c0_wired(0);
-	__asm__ __volatile__(
-		"jr\t%0"
-		:
-		: "r" (0xbfc00000));
-}
 
-extern int led_state;
-#define kLED            0xBC000000
-#define LEDSet(x)       (*(volatile unsigned char *) kLED) = (( unsigned char)x)
+	last = COBALT_KEY_PORT;
 
-void cobalt_machine_halt(void)
-{
-	int mark;
+	for (state = 0;;) {
+
+		state ^= COBALT_LED_POWER_OFF;
+		COBALT_LED_PORT = state;
+
+		diff = COBALT_KEY_PORT ^ last;
+		last ^= diff;
 
-	/* Blink our cute? little LED (number 3)... */
-	while (1) {
-		led_state = led_state | ( 1 << 3 );
-		LEDSet(led_state);
-		mark = jiffies;
-		while (jiffies<(mark+HZ));
-		led_state = led_state & ~( 1 << 3 );
-		LEDSet(led_state);
-		mark = jiffies;
-		while (jiffies<(mark+HZ));
+		if((diff & (COBALT_KEY_ENTER | COBALT_KEY_SELECT)) && !(~last & (COBALT_KEY_ENTER | COBALT_KEY_SELECT)))
+			COBALT_LED_PORT = COBALT_LED_RESET;
+
+		for (mark = jiffies; jiffies - mark < HZ;)
+			;
 	}
 }
 
+void cobalt_machine_restart(char *command)
+{
+	COBALT_LED_PORT = COBALT_LED_RESET;
+
+	/* we should never get here */
+	cobalt_machine_halt();
+}
+
 /*
  * This triggers the luser mode device driver for the power switch ;-)
  */
diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c
index 6b4737e425ed..d358a118fa31 100644
--- a/arch/mips/cobalt/setup.c
+++ b/arch/mips/cobalt/setup.c
@@ -13,6 +13,8 @@
 #include <linux/interrupt.h>
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
 
 #include <asm/bootinfo.h>
 #include <asm/time.h>
@@ -21,6 +23,7 @@
 #include <asm/processor.h>
 #include <asm/reboot.h>
 #include <asm/gt64120.h>
+#include <asm/serial.h>
 
 #include <asm/cobalt/cobalt.h>
 
@@ -30,45 +33,44 @@ extern void cobalt_machine_power_off(void);
 
 int cobalt_board_id;
 
-static char my_cmdline[CL_SIZE] = {
- "console=ttyS0,115200 "
-#ifdef CONFIG_IP_PNP
- "ip=on "
-#endif
-#ifdef CONFIG_ROOT_NFS
- "root=/dev/nfs "
-#else
- "root=/dev/hda1 "
-#endif
- };
-
 const char *get_system_type(void)
 {
+	switch (cobalt_board_id) {
+		case COBALT_BRD_ID_QUBE1:
+			return "Cobalt Qube";
+		case COBALT_BRD_ID_RAQ1:
+			return "Cobalt RaQ";
+		case COBALT_BRD_ID_QUBE2:
+			return "Cobalt Qube2";
+		case COBALT_BRD_ID_RAQ2:
+			return "Cobalt RaQ2";
+	}
 	return "MIPS Cobalt";
 }
 
 static void __init cobalt_timer_setup(struct irqaction *irq)
 {
-	/* Load timer value for 150 Hz */
-	GALILEO_OUTL(500000, GT_TC0_OFS);
+	/* Load timer value for 1KHz (TCLK is 50MHz) */
+	GALILEO_OUTL(50*1000*1000 / 1000, GT_TC0_OFS);
 
-	/* Register our timer interrupt */
-	setup_irq(COBALT_TIMER_IRQ, irq);
+	/* Enable timer */
+	GALILEO_OUTL(GALILEO_ENTC0 | GALILEO_SELTC0, GT_TC_CONTROL_OFS);
 
-	/* Enable timer ints */
-	GALILEO_OUTL((GALILEO_ENTC0 | GALILEO_SELTC0), GT_TC_CONTROL_OFS);
-	/* Unmask timer int */
-	GALILEO_OUTL(0x100, GT_INTRMASK_OFS);
+	/* Register interrupt */
+	setup_irq(COBALT_GALILEO_IRQ, irq);
+
+	/* Enable interrupt */
+	GALILEO_OUTL(GALILEO_INTR_T0EXP | GALILEO_INL(GT_INTRMASK_OFS), GT_INTRMASK_OFS);
 }
 
 extern struct pci_ops gt64111_pci_ops;
 
 static struct resource cobalt_mem_resource = {
-	"GT64111 PCI MEM", GT64111_IO_BASE, 0xffffffffUL, IORESOURCE_MEM
+	"PCI memory", GT64111_MEM_BASE, GT64111_MEM_END, IORESOURCE_MEM
 };
 
 static struct resource cobalt_io_resource = {
-	"GT64111 IO MEM", 0x00001000UL, 0x0fffffffUL, IORESOURCE_IO
+	"PCI I/O", 0x1000, 0xffff, IORESOURCE_IO
 };
 
 static struct resource cobalt_io_resources[] = {
@@ -86,11 +88,12 @@ static struct pci_controller cobalt_pci_controller = {
 	.mem_resource	= &cobalt_mem_resource,
 	.mem_offset	= 0,
 	.io_resource	= &cobalt_io_resource,
-	.io_offset	= 0x00001000UL - GT64111_IO_BASE
+	.io_offset	= 0 - GT64111_IO_BASE
 };
 
-static void __init cobalt_setup(void)
+void __init plat_setup(void)
 {
+	static struct uart_port uart;
 	unsigned int devfn = PCI_DEVFN(COBALT_PCICONF_VIA, 0);
 	int i;
 
@@ -100,7 +103,10 @@ static void __init cobalt_setup(void)
 
 	board_timer_setup = cobalt_timer_setup;
 
-        set_io_port_base(KSEG1ADDR(GT64111_IO_BASE));
+        set_io_port_base(CKSEG1ADDR(GT64111_IO_BASE));
+
+	/* I/O port resource must include UART and LCD/buttons */
+	ioport_resource.end = 0x0fffffff;
 
 	/*
 	 * This is a prom style console. We just poke at the
@@ -120,27 +126,61 @@ static void __init cobalt_setup(void)
         cobalt_board_id >>= ((VIA_COBALT_BRD_ID_REG & 3) * 8);
         cobalt_board_id = VIA_COBALT_BRD_REG_to_ID(cobalt_board_id);
 
+	printk("Cobalt board ID: %d\n", cobalt_board_id);
+
 #ifdef CONFIG_PCI
 	register_pci_controller(&cobalt_pci_controller);
 #endif
-}
 
-early_initcall(cobalt_setup);
+#ifdef CONFIG_SERIAL_8250
+	if (cobalt_board_id > COBALT_BRD_ID_RAQ1) {
+
+		uart.line	= 0;
+		uart.type	= PORT_UNKNOWN;
+		uart.uartclk	= 18432000;
+		uart.irq	= COBALT_SERIAL_IRQ;
+		uart.flags	= STD_COM_FLAGS;
+		uart.iobase	= 0xc800000;
+		uart.iotype	= UPIO_PORT;
+
+		early_serial_setup(&uart);
+	}
+#endif
+}
 
 /*
  * Prom init. We read our one and only communication with the firmware.
- * Grab the amount of installed memory
+ * Grab the amount of installed memory.
+ * Better boot loaders (CoLo) pass a command line too :-)
  */
 
 void __init prom_init(void)
 {
-	int argc = fw_arg0;
-
-	strcpy(arcs_cmdline, my_cmdline);
+	int narg, indx, posn, nchr;
+	unsigned long memsz;
+	char **argv;
 
 	mips_machgroup = MACH_GROUP_COBALT;
 
-	add_memory_region(0x0, argc & 0x7fffffff, BOOT_MEM_RAM);
+	memsz = fw_arg0 & 0x7fff0000;
+	narg = fw_arg0 & 0x0000ffff;
+
+	if (narg) {
+		arcs_cmdline[0] = '\0';
+		argv = (char **) fw_arg1;
+		posn = 0;
+		for (indx = 1; indx < narg; ++indx) {
+			nchr = strlen(argv[indx]);
+			if (posn + 1 + nchr + 1 > sizeof(arcs_cmdline))
+				break;
+			if (posn)
+				arcs_cmdline[posn++] = ' ';
+			strcpy(arcs_cmdline + posn, argv[indx]);
+			posn += nchr;
+		}
+	}
+
+	add_memory_region(0x0, memsz, BOOT_MEM_RAM);
 }
 
 unsigned long __init prom_free_prom_memory(void)
diff --git a/arch/mips/configs/atlas_defconfig b/arch/mips/configs/atlas_defconfig
index 3120a02b8670..89c21572a59c 100644
--- a/arch/mips/configs/atlas_defconfig
+++ b/arch/mips/configs/atlas_defconfig
@@ -1,97 +1,79 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:00 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:05:52 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 CONFIG_MIPS_ATLAS=y
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_MIPS_BONITO64=y
 CONFIG_MIPS_MSC=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
 CONFIG_MIPS_BOARDS_GEN=y
 CONFIG_MIPS_GT64120=y
 CONFIG_SWAP_IO_SPACE=y
@@ -101,8 +83,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -118,94 +102,104 @@ CONFIG_CPU_MIPS32=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_CPU_MIPS64_R1=y
+CONFIG_SYS_HAS_CPU_NEVADA=y
+CONFIG_SYS_HAS_CPU_RM7000=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_BOARD_SCACHE=y
+CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PC-card bridges
-#
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-
-#
-# Memory Technology Devices (MTD)
+# Code maturity level options
 #
-# CONFIG_MTD is not set
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
-# Parallel port support
+# General setup
 #
-# CONFIG_PARPORT is not set
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
-# Plug and Play support
+# Loadable module support
 #
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
 
 #
-# Block devices
+# Block layer
 #
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-CONFIG_BLK_DEV_UMEM=m
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
 
 #
 # IO Schedulers
@@ -214,145 +208,39 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
 
 #
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=m
-CONFIG_SCSI_ISCSI_ATTRS=m
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_LEGACY_PROC=y
+CONFIG_MMU=y
 
 #
-# Fusion MPT device support
+# PCCARD (PCMCIA/CardBus) support
 #
-# CONFIG_FUSION is not set
+# CONFIG_PCCARD is not set
 
 #
-# IEEE 1394 (FireWire) support
+# PCI Hotplug Support
 #
-# CONFIG_IEEE1394 is not set
+# CONFIG_HOTPLUG_PCI is not set
 
 #
-# I2O device support
+# Executable file formats
 #
-# CONFIG_I2O is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
 
 #
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -361,15 +249,20 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
 CONFIG_NET_KEY=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_FWMARK=y
 CONFIG_IP_ROUTE_MULTIPATH=y
+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
@@ -387,8 +280,10 @@ CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
 
 #
 # IP: Virtual Server Configuration
@@ -435,16 +330,27 @@ CONFIG_NETFILTER=y
 CONFIG_BRIDGE_NETFILTER=y
 
 #
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
 # IP: Netfilter Configuration
 #
 CONFIG_IP_NF_CONNTRACK=m
 CONFIG_IP_NF_CT_ACCT=y
 CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
+CONFIG_IP_NF_CONNTRACK_NETLINK=m
 CONFIG_IP_NF_CT_PROTO_SCTP=m
 CONFIG_IP_NF_FTP=m
 CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_PPTP=m
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_LIMIT=m
@@ -469,14 +375,18 @@ CONFIG_IP_NF_MATCH_PHYSDEV=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_REALM=m
 CONFIG_IP_NF_MATCH_SCTP=m
+CONFIG_IP_NF_MATCH_DCCP=m
 CONFIG_IP_NF_MATCH_COMMENT=m
 CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -488,12 +398,14 @@ CONFIG_IP_NF_NAT_IRC=m
 CONFIG_IP_NF_NAT_FTP=m
 CONFIG_IP_NF_NAT_TFTP=m
 CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_NAT_PPTP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_DSCP=m
 CONFIG_IP_NF_TARGET_MARK=m
 CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_TARGET_CONNMARK=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
@@ -503,7 +415,7 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
 #
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
@@ -523,8 +435,11 @@ CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_PHYSDEV=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_NFQUEUE=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 
 #
@@ -550,8 +465,11 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_ULOG=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
 
 #
 # SCTP Configuration (EXPERIMENTAL)
@@ -587,6 +505,10 @@ CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_CLK_JIFFIES=y
 # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
 # CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
@@ -599,37 +521,241 @@ CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
+
+#
+# Classification
+#
 CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
 CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
 CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
 # CONFIG_CLS_U32_PERF is not set
-CONFIG_NET_CLS_IND=y
 # CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_POLICE=y
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_ESTIMATOR=y
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=m
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+
+#
+# SCSI low-level drivers
+#
+CONFIG_ISCSI_TCP=m
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID5=m
+CONFIG_MD_RAID6=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 CONFIG_EQUALIZER=m
 CONFIG_TUN=m
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -637,12 +763,27 @@ CONFIG_TUN=m
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -681,13 +822,17 @@ CONFIG_LAN_SAA9730=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -700,6 +845,8 @@ CONFIG_LAN_SAA9730=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -712,6 +859,8 @@ CONFIG_LAN_SAA9730=y
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -741,19 +890,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_RAW=y
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -766,6 +902,17 @@ CONFIG_MOUSE_SERIAL=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -786,6 +933,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -812,6 +960,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -822,10 +976,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -845,7 +1009,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -855,12 +1018,12 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
@@ -879,10 +1042,15 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -903,12 +1071,14 @@ CONFIG_JFS_SECURITY=y
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
+CONFIG_XFS_EXPORT=y
 CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
 CONFIG_MINIX_FS=m
 CONFIG_ROMFS_FS=m
+CONFIG_INOTIFY=y
 CONFIG_QUOTA=y
 # CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
@@ -916,6 +1086,7 @@ CONFIG_QUOTACTL=y
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -943,12 +1114,10 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -974,16 +1143,19 @@ CONFIG_UFS_FS=m
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
 # CONFIG_NFSD_TCP is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -992,6 +1164,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1051,7 +1224,9 @@ CONFIG_NLS_UTF8=m
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -1073,6 +1248,7 @@ CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
@@ -1097,9 +1273,12 @@ CONFIG_CRYPTO_CRC32C=m
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
new file mode 100644
index 000000000000..069f9d14983e
--- /dev/null
+++ b/arch/mips/configs/bigsur_defconfig
@@ -0,0 +1,903 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:05:54 2005
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+CONFIG_SIBYTE_BIGSUR=y
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_SIBYTE_BCM1x80=y
+CONFIG_SIBYTE_SB1xxx_SOC=y
+# CONFIG_CPU_SB1_PASS_1 is not set
+# CONFIG_CPU_SB1_PASS_2_1250 is not set
+# CONFIG_CPU_SB1_PASS_2_2 is not set
+# CONFIG_CPU_SB1_PASS_4 is not set
+# CONFIG_CPU_SB1_PASS_2_112x is not set
+# CONFIG_CPU_SB1_PASS_3 is not set
+# CONFIG_SIMULATION is not set
+# CONFIG_SB1_CEX_ALWAYS_FATAL is not set
+# CONFIG_SB1_CERR_STALL is not set
+CONFIG_SIBYTE_CFE=y
+# CONFIG_SIBYTE_CFE_CONSOLE is not set
+# CONFIG_SIBYTE_BUS_WATCHER is not set
+# CONFIG_SIBYTE_SB1250_PROF is not set
+# CONFIG_SIBYTE_TBPROF is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DMA_COHERENT=y
+CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_BOOT_ELF32=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+CONFIG_CPU_SB1=y
+CONFIG_SYS_HAS_CPU_SB1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_SIBYTE_DMA_PAGEOPS is not set
+# CONFIG_MIPS_MT is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_LLDSCD=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_PREEMPT_BKL is not set
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_LEGACY_PROC=y
+CONFIG_PCI_DEBUG=y
+CONFIG_MMU=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_BUILD_ELF64=y
+CONFIG_MIPS32_COMPAT=y
+CONFIG_COMPAT=y
+CONFIG_MIPS32_O32=y
+# CONFIG_MIPS32_N32 is not set
+CONFIG_BINFMT_ELF32=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDETAPE=y
+CONFIG_BLK_DEV_IDEFLOPPY=y
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_BLK_DEV_IDE_SWARM is not set
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+CONFIG_NET_SB1250_MAC=y
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_STALDRV is not set
+CONFIG_SIBYTE_SB1250_DUART=y
+CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+CONFIG_I2C_ALGO_SIBYTE=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+CONFIG_I2C_SIBYTE=y
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+CONFIG_SENSORS_DS1337=y
+CONFIG_SENSORS_DS1374=y
+CONFIG_SENSORS_EEPROM=y
+CONFIG_SENSORS_PCF8574=y
+CONFIG_SENSORS_PCA9539=y
+CONFIG_SENSORS_PCF8591=y
+CONFIG_SENSORS_RTC8564=y
+CONFIG_SENSORS_MAX6875=y
+# CONFIG_RTC_X1205_I2C is not set
+CONFIG_I2C_DEBUG_CORE=y
+CONFIG_I2C_DEBUG_ALGO=y
+CONFIG_I2C_DEBUG_BUS=y
+CONFIG_I2C_DEBUG_CHIP=y
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE=""
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_KGDB is not set
+# CONFIG_SB1XXX_CORELIS is not set
+# CONFIG_RUNTIME_DEBUG is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_TEA=m
+# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig
index 158e7165f4e3..5261e29ccf37 100644
--- a/arch/mips/configs/capcella_defconfig
+++ b/arch/mips/configs/capcella_defconfig
@@ -1,112 +1,93 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:00 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:05:55 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-CONFIG_MACH_VR41XX=y
-# CONFIG_NEC_CMBVR4133 is not set
-# CONFIG_CASIO_E55 is not set
-# CONFIG_IBM_WORKPAD is not set
-# CONFIG_TANBAC_TB0226 is not set
-# CONFIG_TANBAC_TB0229 is not set
-# CONFIG_VICTOR_MPC30X is not set
-CONFIG_ZAO_CAPCELLA=y
-CONFIG_PCI_VR41XX=y
-CONFIG_VRC4173=y
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+CONFIG_MACH_VR41XX=y
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_NEC_CMBVR4133 is not set
+# CONFIG_CASIO_E55 is not set
+# CONFIG_IBM_WORKPAD is not set
+# CONFIG_TANBAC_TB022X is not set
+# CONFIG_VICTOR_MPC30X is not set
+CONFIG_ZAO_CAPCELLA=y
+CONFIG_PCI_VR41XX=y
+# CONFIG_VRC4173 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 CONFIG_CPU_VR41XX=y
@@ -122,21 +103,114 @@ CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_VR41XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -145,10 +219,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -161,6 +231,84 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
 # Device Drivers
 #
 
@@ -169,7 +317,12 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
@@ -188,7 +341,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -199,19 +351,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
+# CONFIG_CDROM_PKTCDVD is not set
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -244,6 +384,7 @@ CONFIG_IDE_GENERIC=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 
 #
@@ -254,6 +395,7 @@ CONFIG_IDE_GENERIC=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -266,79 +408,13 @@ CONFIG_IDE_GENERIC=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
+# Network device support
 #
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -346,12 +422,27 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -359,7 +450,30 @@ CONFIG_NET_ETHERNET=y
 #
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+CONFIG_8139TOO=y
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_LAN_SAA9730 is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -371,12 +485,17 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -389,6 +508,8 @@ CONFIG_NET_ETHERNET=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -400,6 +521,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -419,29 +542,13 @@ CONFIG_INPUT=y
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
 # CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=m
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -451,6 +558,12 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -461,16 +574,16 @@ CONFIG_HW_CONSOLE=y
 #
 # Serial drivers
 #
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
 
 #
 # Non-8250 serial port support
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_VR41XX=y
+CONFIG_SERIAL_VR41XX_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -483,21 +596,10 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Watchdog Cards
 #
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
+# CONFIG_WATCHDOG is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
+# CONFIG_RTC_VR41XX is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -506,9 +608,16 @@ CONFIG_WATCHDOG=y
 # Ftape, the floppy tape device driver
 #
 # CONFIG_DRM is not set
+CONFIG_GPIO_VR41XX=y
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -519,10 +628,20 @@ CONFIG_WATCHDOG=y
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -542,7 +661,6 @@ CONFIG_WATCHDOG=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -552,12 +670,12 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
@@ -576,21 +694,29 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -611,12 +737,10 @@ CONFIG_AUTOFS4_FS=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -648,6 +772,7 @@ CONFIG_NFSD=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -656,6 +781,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -676,9 +802,11 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+CONFIG_CMDLINE="mem=32M console=ttyVR0,38400"
 
 #
 # Security options
@@ -690,7 +818,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -700,7 +852,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
+CONFIG_CRC16=m
+CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig
index 4302c6f914f5..216f4023a81b 100644
--- a/arch/mips/configs/cobalt_defconfig
+++ b/arch/mips/configs/cobalt_defconfig
@@ -1,90 +1,76 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:00 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:05:57 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 CONFIG_MIPS_COBALT=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_I8259=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_MIPS_GT64111=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -92,8 +78,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -109,23 +97,110 @@ CONFIG_CPU_NEVADA=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_NEVADA=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -134,10 +209,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -150,6 +221,80 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+
+#
 # Device Drivers
 #
 
@@ -161,6 +306,12 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -177,7 +328,6 @@ CONFIG_FW_LOADER=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -189,19 +339,9 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=y
 
 #
@@ -234,6 +374,7 @@ CONFIG_IDE_GENERIC=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=y
 # CONFIG_SCSI is not set
 
 #
@@ -244,6 +385,7 @@ CONFIG_IDE_GENERIC=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -256,75 +398,13 @@ CONFIG_IDE_GENERIC=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
+# Network device support
 #
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -332,12 +412,27 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -357,12 +452,16 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -375,6 +474,8 @@ CONFIG_NET_ETHERNET=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=y
 
 #
 # Wan interfaces
@@ -386,6 +487,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -415,19 +518,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -437,6 +527,17 @@ CONFIG_SERIO_RAW=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -457,6 +558,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -483,6 +585,12 @@ CONFIG_COBALT_LCD=y
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -493,10 +601,20 @@ CONFIG_COBALT_LCD=y
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -516,7 +634,6 @@ CONFIG_COBALT_LCD=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -526,12 +643,12 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
@@ -550,12 +667,17 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 CONFIG_FS_MBCACHE=y
@@ -565,10 +687,12 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -589,12 +713,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
 
 #
 # Miscellaneous filesystems
@@ -622,7 +744,7 @@ CONFIG_NFS_FS=y
 # CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -631,6 +753,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -651,7 +774,9 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -665,7 +790,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -675,7 +824,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig
index 962fc14b58c2..18ac7926c058 100644
--- a/arch/mips/configs/db1000_defconfig
+++ b/arch/mips/configs/db1000_defconfig
@@ -1,118 +1,86 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:01 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:05:59 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+CONFIG_MIPS_DB1000=y
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-CONFIG_SOC_AU1X00=y
-CONFIG_SOC_AU1000=y
-# CONFIG_SOC_AU1100 is not set
-# CONFIG_SOC_AU1500 is not set
-# CONFIG_SOC_AU1550 is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-CONFIG_MIPS_DB1000=y
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SOC_AU1000=y
+CONFIG_SOC_AU1X00=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -128,88 +96,97 @@ CONFIG_CPU_MIPS32=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
 CONFIG_64BIT_PHYS_ADDR=y
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-# CONFIG_PCI is not set
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-
-#
-# PC-card bridges
-#
-# CONFIG_TCIC is not set
-# CONFIG_PCMCIA_AU1X00 is not set
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
+# Code maturity level options
 #
-# CONFIG_MTD is not set
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
-# Parallel port support
+# General setup
 #
-# CONFIG_PARPORT is not set
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
-# Plug and Play support
+# Loadable module support
 #
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
 
 #
-# Block devices
+# Block layer
 #
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
 
 #
 # IO Schedulers
@@ -218,37 +195,47 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
 
 #
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
-# CONFIG_SCSI is not set
+CONFIG_HW_HAS_PCI=y
+# CONFIG_PCI is not set
+CONFIG_MMU=y
 
 #
-# Multi-device support (RAID and LVM)
+# PCCARD (PCMCIA/CardBus) support
 #
-# CONFIG_MD is not set
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
 
 #
-# Fusion MPT device support
+# PC-card bridges
 #
+# CONFIG_PCMCIA_AU1X00 is not set
 
 #
-# IEEE 1394 (FireWire) support
+# PCI Hotplug Support
 #
 
 #
-# I2O device support
+# Executable file formats
 #
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+# CONFIG_PM is not set
 
 #
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -257,12 +244,14 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
 CONFIG_NET_KEY=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 # CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
@@ -276,8 +265,10 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
 
 #
 # IP: Virtual Server Configuration
@@ -288,15 +279,25 @@ CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
 #
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
+
+#
 # IP: Netfilter Configuration
 #
 # CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
 
 #
 # SCTP Configuration (EXPERIMENTAL)
@@ -319,23 +320,190 @@ CONFIG_XFRM_USER=m
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_ALCHEMY=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -343,6 +511,7 @@ CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 CONFIG_MIPS_AU1X00_ENET=y
+# CONFIG_SMC91X is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -385,10 +554,13 @@ CONFIG_PPP_ASYNC=m
 # CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 # CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -418,18 +590,6 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -439,6 +599,16 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -451,13 +621,17 @@ CONFIG_HW_CONSOLE=y
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_AU1X00=y
 
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_AU1X00=y
-CONFIG_SERIAL_AU1X00_CONSOLE=y
+# CONFIG_SERIAL_AU1X00 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
@@ -473,22 +647,30 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
-CONFIG_RTC=y
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
 
 #
 # PCMCIA character devices
 #
 CONFIG_SYNCLINK_CS=m
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -499,10 +681,20 @@ CONFIG_SYNCLINK_CS=m
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -522,7 +714,6 @@ CONFIG_SYNCLINK_CS=m
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -532,11 +723,12 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
@@ -552,7 +744,10 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # InfiniBand support
 #
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
 
 #
 # File systems
@@ -561,6 +756,7 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -579,10 +775,12 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -603,13 +801,10 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -621,6 +816,8 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set
@@ -641,6 +838,7 @@ CONFIG_NFSD=m
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -650,6 +848,7 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -709,7 +908,9 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -725,26 +926,27 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
 CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_TEST is not set
 
@@ -756,9 +958,8 @@ CONFIG_CRYPTO_CRC32C=m
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig
index 6a528d479d70..4f55f7414c9c 100644
--- a/arch/mips/configs/db1100_defconfig
+++ b/arch/mips/configs/db1100_defconfig
@@ -1,118 +1,86 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:01 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:00 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+CONFIG_MIPS_DB1100=y
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-CONFIG_SOC_AU1X00=y
-# CONFIG_SOC_AU1000 is not set
-CONFIG_SOC_AU1100=y
-# CONFIG_SOC_AU1500 is not set
-# CONFIG_SOC_AU1550 is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_DB1000 is not set
-CONFIG_MIPS_DB1100=y
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SOC_AU1100=y
+CONFIG_SOC_AU1X00=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -128,86 +96,97 @@ CONFIG_CPU_MIPS32=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_64BIT_PHYS_ADDR is not set
+# CONFIG_MIPS_MT is not set
+CONFIG_64BIT_PHYS_ADDR=y
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-
-#
-# PC-card bridges
-#
-# CONFIG_TCIC is not set
-# CONFIG_PCMCIA_AU1X00 is not set
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
+# Code maturity level options
 #
-# CONFIG_MTD is not set
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
-# Parallel port support
+# General setup
 #
-# CONFIG_PARPORT is not set
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
-# Plug and Play support
+# Loadable module support
 #
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
 
 #
-# Block devices
+# Block layer
 #
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
 
 #
 # IO Schedulers
@@ -216,37 +195,36 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
 
 #
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
-# CONFIG_MD is not set
+CONFIG_MMU=y
 
 #
-# Fusion MPT device support
+# PCCARD (PCMCIA/CardBus) support
 #
+# CONFIG_PCCARD is not set
 
 #
-# IEEE 1394 (FireWire) support
+# PCI Hotplug Support
 #
 
 #
-# I2O device support
+# Executable file formats
 #
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+# CONFIG_PM is not set
 
 #
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -255,12 +233,14 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
 CONFIG_NET_KEY=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 # CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
@@ -274,8 +254,10 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
 
 #
 # IP: Virtual Server Configuration
@@ -286,15 +268,25 @@ CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
 #
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
+
+#
 # IP: Netfilter Configuration
 #
 # CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
 
 #
 # SCTP Configuration (EXPERIMENTAL)
@@ -317,30 +309,198 @@ CONFIG_XFRM_USER=m
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_ALCHEMY=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
-# CONFIG_MIPS_AU1X00_ENET is not set
+CONFIG_MIPS_AU1X00_ENET=y
+# CONFIG_SMC91X is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -360,19 +520,6 @@ CONFIG_MII=m
 # CONFIG_NET_RADIO is not set
 
 #
-# PCMCIA network device support
-#
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_FMVJ18X=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_NMCLAN=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PCMCIA_AXNET=m
-
-#
 # Wan interfaces
 #
 # CONFIG_WAN is not set
@@ -383,10 +530,13 @@ CONFIG_PPP_ASYNC=m
 # CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 # CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -416,18 +566,6 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-CONFIG_SERIO_LIBPS2=m
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -437,6 +575,16 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=m
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -449,12 +597,18 @@ CONFIG_HW_CONSOLE=y
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_AU1X00=y
 
 #
 # Non-8250 serial port support
 #
 # CONFIG_SERIAL_AU1X00 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -468,20 +622,21 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
-CONFIG_RTC=y
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
 
 #
-# PCMCIA character devices
+# TPM devices
 #
-CONFIG_SYNCLINK_CS=m
-# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -494,10 +649,20 @@ CONFIG_SYNCLINK_CS=m
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -510,13 +675,43 @@ CONFIG_SYNCLINK_CS=m
 #
 # Graphics support
 #
-# CONFIG_FB is not set
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_AU1100=y
+# CONFIG_FB_VIRTUAL is not set
 
 #
 # Console display driver support
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -527,11 +722,12 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
@@ -547,7 +743,10 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # InfiniBand support
 #
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
 
 #
 # File systems
@@ -556,6 +755,7 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -574,10 +774,12 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -598,13 +800,10 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -616,6 +815,8 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set
@@ -636,6 +837,7 @@ CONFIG_NFSD=m
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -645,6 +847,7 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -704,7 +907,9 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -720,26 +925,27 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
 CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_TEST is not set
 
@@ -751,9 +957,8 @@ CONFIG_CRYPTO_CRC32C=m
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig
new file mode 100644
index 000000000000..0e5de7d05f23
--- /dev/null
+++ b/arch/mips/configs/db1200_defconfig
@@ -0,0 +1,1022 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:03 2005
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+CONFIG_MIPS_DB1200=y
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DMA_COHERENT=y
+CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SOC_AU1200=y
+CONFIG_SOC_AU1X00=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
+CONFIG_64BIT_PHYS_ADDR=y
+# CONFIG_CPU_ADVANCED is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_MMU=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+CONFIG_PCMCIA_AU1X00=m
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_ALCHEMY=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_AU1550 is not set
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_BLK_DEV_IDECS=m
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDE_AU1XXX=y
+CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA=y
+# CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA is not set
+CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_MIPS_AU1X00_ENET is not set
+# CONFIG_SMC91X is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_AU1X00_GPIO is not set
+# CONFIG_TS_AU1X00_ADS7846 is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_AU1X00=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AU1X00 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_AU1200=y
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_AU1X=y
+
+#
+# InfiniBand support
+#
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+CONFIG_JFS_FS=y
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_ZISOFS_FS=m
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=y
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE="mem=48M"
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig
index fed6f2fab48b..86e7be8412f3 100644
--- a/arch/mips/configs/db1500_defconfig
+++ b/arch/mips/configs/db1500_defconfig
@@ -1,118 +1,88 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:01 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:05 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+CONFIG_MIPS_DB1500=y
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-CONFIG_SOC_AU1X00=y
-# CONFIG_SOC_AU1000 is not set
-# CONFIG_SOC_AU1100 is not set
-CONFIG_SOC_AU1500=y
-# CONFIG_SOC_AU1550 is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-CONFIG_MIPS_DB1500=y
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_DMA_COHERENT=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SOC_AU1500=y
+CONFIG_SOC_AU1X00=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -128,24 +98,117 @@ CONFIG_CPU_MIPS32=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
 CONFIG_64BIT_PHYS_ADDR=y
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -154,6 +217,8 @@ CONFIG_MMU=y
 CONFIG_PCCARD=m
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
 CONFIG_CARDBUS=y
 
 #
@@ -162,7 +227,6 @@ CONFIG_CARDBUS=y
 # CONFIG_YENTA is not set
 # CONFIG_PD6729 is not set
 # CONFIG_I82092 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_AU1X00=m
 
 #
@@ -176,6 +240,107 @@ CONFIG_PCMCIA_AU1X00=m
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -186,15 +351,20 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
 #
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 
@@ -206,6 +376,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -232,16 +403,14 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_DB1X00=y
-CONFIG_MTD_DB1X00_BOOT=y
-CONFIG_MTD_DB1X00_USER=y
+CONFIG_MTD_ALCHEMY=y
+# CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
@@ -266,6 +435,11 @@ CONFIG_MTD_DB1X00_USER=y
 # CONFIG_MTD_NAND is not set
 
 #
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
 # Parallel port support
 #
 # CONFIG_PARPORT is not set
@@ -277,7 +451,6 @@ CONFIG_MTD_DB1X00_USER=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -290,19 +463,9 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -336,6 +499,7 @@ CONFIG_BLK_DEV_IDECS=m
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
 
 #
@@ -346,6 +510,7 @@ CONFIG_BLK_DEV_IDECS=m
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -358,94 +523,13 @@ CONFIG_BLK_DEV_IDECS=m
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
+# Network device support
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -453,6 +537,20 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -460,7 +558,9 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
 
 #
 # Tulip family network device support
@@ -479,12 +579,16 @@ CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -497,6 +601,8 @@ CONFIG_MIPS_AU1X00_ENET=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
 
 #
 # PCMCIA network device support
@@ -516,10 +622,13 @@ CONFIG_PPP_ASYNC=m
 # CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 # CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -549,19 +658,6 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -571,6 +667,17 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 # CONFIG_VT is not set
@@ -581,15 +688,20 @@ CONFIG_SERIO_RAW=m
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_AU1X00=y
 
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_AU1X00=y
-CONFIG_SERIAL_AU1X00_CONSOLE=y
+# CONFIG_SERIAL_AU1X00 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -603,7 +715,8 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
-CONFIG_RTC=y
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -617,9 +730,17 @@ CONFIG_RTC=y
 # PCMCIA character devices
 #
 CONFIG_SYNCLINK_CS=m
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -630,10 +751,20 @@ CONFIG_SYNCLINK_CS=m
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -647,7 +778,6 @@ CONFIG_SYNCLINK_CS=m
 # Graphics support
 #
 # CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -657,12 +787,94 @@ CONFIG_SOUND=y
 #
 # Advanced Linux Sound Architecture
 #
-# CONFIG_SND is not set
+CONFIG_SND=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_GENERIC_DRIVER=y
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# PCI devices
+#
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
+
+#
+# ALSA MIPS devices
+#
+CONFIG_SND_AU1X00=m
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+
+#
+# PCMCIA devices
+#
 
 #
 # Open Sound System
 #
 CONFIG_SOUND_PRIME=y
+CONFIG_OBSOLETE_OSS_DRIVER=y
 # CONFIG_SOUND_BT878 is not set
 # CONFIG_SOUND_CMPCI is not set
 # CONFIG_SOUND_EMU10K1 is not set
@@ -675,12 +887,11 @@ CONFIG_SOUND_PRIME=y
 # CONFIG_SOUND_MAESTRO3 is not set
 # CONFIG_SOUND_ICH is not set
 # CONFIG_SOUND_SONICVIBES is not set
-CONFIG_SOUND_AU1000=y
+# CONFIG_SOUND_AU1000 is not set
 # CONFIG_SOUND_TRIDENT is not set
 # CONFIG_SOUND_MSNDCLAS is not set
 # CONFIG_SOUND_MSNDPIN is not set
 # CONFIG_SOUND_VIA82CXXX is not set
-# CONFIG_SOUND_OSS is not set
 # CONFIG_SOUND_ALI5455 is not set
 # CONFIG_SOUND_FORTE is not set
 # CONFIG_SOUND_RME96XX is not set
@@ -689,6 +900,8 @@ CONFIG_SOUND_AU1000=y
 #
 # USB support
 #
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 
@@ -699,28 +912,31 @@ CONFIG_USB=y
 # CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
 
 #
 # USB Host Controller Drivers
 #
 # CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 # CONFIG_USB_STORAGE is not set
 
@@ -733,12 +949,17 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_HIDDEV is not set
 # CONFIG_USB_AIPTEK is not set
 # CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
 # CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
 # CONFIG_USB_EGALAX is not set
+CONFIG_USB_YEALINK=m
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
 
 #
 # USB Imaging devices
@@ -762,6 +983,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -786,9 +1008,10 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
+CONFIG_USB_LD=m
 
 #
-# USB ATM/DSL drivers
+# USB DSL modem support
 #
 
 #
@@ -807,12 +1030,17 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -831,10 +1059,12 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -855,13 +1085,10 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -895,6 +1122,7 @@ CONFIG_NFSD=m
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -904,6 +1132,7 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -963,7 +1192,9 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -979,26 +1210,27 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
 CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_TEST is not set
 
@@ -1010,9 +1242,8 @@ CONFIG_CRYPTO_CRC32C=m
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig
index 178c0ad1af75..ea5ab0ca5774 100644
--- a/arch/mips/configs/db1550_defconfig
+++ b/arch/mips/configs/db1550_defconfig
@@ -1,118 +1,87 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:02 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:07 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+CONFIG_MIPS_DB1550=y
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-CONFIG_SOC_AU1X00=y
-# CONFIG_SOC_AU1000 is not set
-# CONFIG_SOC_AU1100 is not set
-# CONFIG_SOC_AU1500 is not set
-CONFIG_SOC_AU1550=y
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-CONFIG_MIPS_DB1550=y
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_DMA_COHERENT=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SOC_AU1550=y
+CONFIG_SOC_AU1X00=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -128,24 +97,117 @@ CONFIG_CPU_MIPS32=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
 CONFIG_64BIT_PHYS_ADDR=y
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -154,6 +216,8 @@ CONFIG_MMU=y
 CONFIG_PCCARD=m
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
 CONFIG_CARDBUS=y
 
 #
@@ -162,7 +226,6 @@ CONFIG_CARDBUS=y
 # CONFIG_YENTA is not set
 # CONFIG_PD6729 is not set
 # CONFIG_I82092 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_AU1X00=m
 
 #
@@ -176,6 +239,107 @@ CONFIG_PCMCIA_AU1X00=m
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -186,15 +350,20 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
 #
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 
@@ -206,6 +375,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -238,9 +408,8 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_DB1550=y
-CONFIG_MTD_DB1550_BOOT=y
-CONFIG_MTD_DB1550_USER=y
+CONFIG_MTD_ALCHEMY=y
+# CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
@@ -270,6 +439,11 @@ CONFIG_MTD_NAND_AU1550=m
 # CONFIG_MTD_NAND_NANDSIM is not set
 
 #
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
 # Parallel port support
 #
 # CONFIG_PARPORT is not set
@@ -281,7 +455,6 @@ CONFIG_MTD_NAND_AU1550=m
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -293,19 +466,9 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -350,6 +513,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
 # CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -367,6 +531,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
 
 #
@@ -377,6 +542,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -389,94 +555,13 @@ CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
+# Network device support
 #
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -484,6 +569,20 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -491,7 +590,9 @@ CONFIG_MII=m
 CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
 
 #
 # Tulip family network device support
@@ -510,12 +611,16 @@ CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -528,6 +633,8 @@ CONFIG_MIPS_AU1X00_ENET=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
 
 #
 # PCMCIA network device support
@@ -555,10 +662,13 @@ CONFIG_PPP_ASYNC=m
 # CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 # CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -588,19 +698,6 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -610,6 +707,17 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 # CONFIG_VT is not set
@@ -620,15 +728,20 @@ CONFIG_SERIO_RAW=m
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_AU1X00=y
 
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_AU1X00=y
-CONFIG_SERIAL_AU1X00_CONSOLE=y
+# CONFIG_SERIAL_AU1X00 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -657,9 +770,17 @@ CONFIG_LEGACY_PTY_COUNT=256
 # PCMCIA character devices
 #
 CONFIG_SYNCLINK_CS=m
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -670,10 +791,20 @@ CONFIG_SYNCLINK_CS=m
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -687,7 +818,6 @@ CONFIG_SYNCLINK_CS=m
 # Graphics support
 #
 # CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -697,12 +827,12 @@ CONFIG_SYNCLINK_CS=m
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
@@ -721,12 +851,17 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -745,10 +880,12 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -769,13 +906,10 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -809,6 +943,7 @@ CONFIG_NFSD=m
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -818,6 +953,7 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -877,7 +1013,9 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -893,26 +1031,27 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
 CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_TEST is not set
 
@@ -924,9 +1063,8 @@ CONFIG_CRYPTO_CRC32C=m
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/ddb5476_defconfig b/arch/mips/configs/ddb5476_defconfig
index 70addc73f699..bea00a9e9269 100644
--- a/arch/mips/configs/ddb5476_defconfig
+++ b/arch/mips/configs/ddb5476_defconfig
@@ -1,90 +1,76 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:02 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:09 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 CONFIG_DDB5476=y
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_I8259=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_DDB5XXX_COMMON=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -93,8 +79,10 @@ CONFIG_HAVE_STD_PC_SERIAL_PORT=y
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -110,23 +98,110 @@ CONFIG_CPU_R5432=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R5432=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_ISA=y
 CONFIG_MMU=y
 
@@ -136,11 +211,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-CONFIG_PCMCIA_PROBE=y
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -153,6 +223,83 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+
+#
 # Device Drivers
 #
 
@@ -161,7 +308,13 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
 
 #
 # Memory Technology Devices (MTD)
@@ -181,8 +334,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -193,19 +344,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=y
 
 #
@@ -239,6 +380,7 @@ CONFIG_IDE_GENERIC=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=y
 # CONFIG_SCSI is not set
 
 #
@@ -254,6 +396,7 @@ CONFIG_IDE_GENERIC=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -266,78 +409,13 @@ CONFIG_IDE_GENERIC=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
+# Network device support
 #
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -345,14 +423,28 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_NET_VENDOR_RACAL is not set
 
@@ -365,7 +457,6 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_HP100 is not set
 # CONFIG_NET_ISA is not set
 # CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -377,12 +468,16 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -395,6 +490,8 @@ CONFIG_NET_ETHERNET=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=y
 
 #
 # Wan interfaces
@@ -406,6 +503,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -435,19 +534,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -457,6 +543,17 @@ CONFIG_SERIO_RAW=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -477,6 +574,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -503,6 +601,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -513,10 +617,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -530,6 +644,10 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Graphics support
 #
 CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_MACMODES is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_CIRRUS is not set
@@ -537,6 +655,8 @@ CONFIG_FB=y
 # CONFIG_FB_CYBER2000 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
 # CONFIG_FB_RADEON_OLD is not set
@@ -549,8 +669,9 @@ CONFIG_FB=y
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_SMIVGX is not set
+# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_E1356 is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -575,12 +696,12 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
@@ -599,21 +720,29 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -634,12 +763,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
 
 #
 # Miscellaneous filesystems
@@ -668,7 +795,7 @@ CONFIG_NFS_FS=y
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -677,6 +804,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -697,7 +825,9 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="ip=any"
 
@@ -711,7 +841,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -721,7 +875,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/ddb5477_defconfig b/arch/mips/configs/ddb5477_defconfig
index 60292808b384..61f7171ca7ed 100644
--- a/arch/mips/configs/ddb5477_defconfig
+++ b/arch/mips/configs/ddb5477_defconfig
@@ -1,91 +1,77 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:02 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:11 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 CONFIG_DDB5477=y
-CONFIG_DDB5477_BUS_FREQUENCY=0
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_DDB5477_BUS_FREQUENCY=0
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_I8259=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_DDB5XXX_COMMON=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -93,8 +79,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -110,23 +98,110 @@ CONFIG_CPU_R5432=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R5432=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -135,10 +210,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -151,6 +222,83 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+
+#
 # Device Drivers
 #
 
@@ -159,7 +307,13 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
 
 #
 # Memory Technology Devices (MTD)
@@ -178,7 +332,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -189,19 +342,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=y
 
 #
@@ -212,6 +355,7 @@ CONFIG_ATA_OVER_ETH=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=y
 # CONFIG_SCSI is not set
 
 #
@@ -222,6 +366,7 @@ CONFIG_ATA_OVER_ETH=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -234,78 +379,13 @@ CONFIG_ATA_OVER_ETH=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
+# Network device support
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -313,12 +393,27 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -357,13 +452,17 @@ CONFIG_PCNET32=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -376,6 +475,8 @@ CONFIG_PCNET32=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=y
 
 #
 # Wan interfaces
@@ -387,6 +488,8 @@ CONFIG_PCNET32=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -416,19 +519,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -438,6 +528,17 @@ CONFIG_SERIO_RAW=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -458,6 +559,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -484,6 +586,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -494,10 +602,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -517,7 +635,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -527,12 +644,12 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
@@ -551,21 +668,29 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -586,12 +711,10 @@ CONFIG_AUTOFS4_FS=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
 
 #
 # Miscellaneous filesystems
@@ -623,6 +746,7 @@ CONFIG_NFSD=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -631,6 +755,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -651,7 +776,9 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="ip=any"
 
@@ -665,7 +792,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -675,7 +826,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=y
 CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig
index 66ec1f41d122..08a4de6ec4a6 100644
--- a/arch/mips/configs/decstation_defconfig
+++ b/arch/mips/configs/decstation_defconfig
@@ -1,96 +1,76 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:03 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:13 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 CONFIG_MACH_DECSTATION=y
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_EARLY_PRINTK=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_BOOT_ELF32=y
 CONFIG_MIPS_L1_CACHE_SHIFT=4
@@ -98,8 +78,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=4
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 CONFIG_CPU_R3000=y
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -115,15 +97,111 @@ CONFIG_CPU_R3000=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R3000=y
+CONFIG_SYS_HAS_CPU_R4X00=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_WB=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_TC=y
@@ -135,10 +213,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 
@@ -150,6 +224,83 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
 # Device Drivers
 #
 
@@ -159,6 +310,12 @@ CONFIG_TRAD_SIGNALS=y
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
@@ -177,26 +334,14 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -206,6 +351,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -213,10 +359,12 @@ CONFIG_SCSI_PROC_FS=y
 # SCSI support type (disk, tape, CD-ROM)
 #
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
+CONFIG_CHR_DEV_ST=m
 # CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -228,13 +376,15 @@ CONFIG_SCSI_CONSTANTS=y
 #
 # SCSI Transport Attributes
 #
-# CONFIG_SCSI_SPI_ATTRS is not set
+CONFIG_SCSI_SPI_ATTRS=m
 # CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
 
 #
 # SCSI low-level drivers
 #
+CONFIG_ISCSI_TCP=m
 CONFIG_SCSI_DECNCR=y
 # CONFIG_SCSI_DECSII is not set
 # CONFIG_SCSI_SATA is not set
@@ -248,6 +398,7 @@ CONFIG_SCSI_DECNCR=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -258,78 +409,27 @@ CONFIG_SCSI_DECNCR=y
 #
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
+# Network device support
 #
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
 
 #
-# QoS and/or fair queueing
+# PHY device support
 #
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
+CONFIG_PHYLIB=m
 
 #
-# Network testing
+# MII PHY device drivers
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -363,6 +463,8 @@ CONFIG_DECLANCE=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -377,48 +479,22 @@ CONFIG_DECLANCE=y
 #
 # Input device support
 #
-CONFIG_INPUT=y
+# CONFIG_INPUT is not set
 
 #
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
+# Hardware I/O ports
 #
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
 
 #
 # Character devices
 #
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
+# CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+CONFIG_SERIAL_DEC=y
+CONFIG_SERIAL_DEC_CONSOLE=y
+CONFIG_ZS=y
 
 #
 # Serial drivers
@@ -428,10 +504,7 @@ CONFIG_HW_CONSOLE=y
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_DZ=y
-CONFIG_SERIAL_DZ_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_DZ is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -445,18 +518,22 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
+CONFIG_RTC=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -467,10 +544,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -483,13 +570,28 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Graphics support
 #
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_PMAG_AA is not set
+CONFIG_FB_PMAG_BA=y
+CONFIG_FB_PMAGB_B=y
+# CONFIG_FB_MAXINE is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_DEC_CLUT224=y
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -504,7 +606,7 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
@@ -520,7 +622,10 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # InfiniBand support
 #
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
 
 #
 # File systems
@@ -529,6 +634,7 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 CONFIG_FS_MBCACHE=y
@@ -538,10 +644,12 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -562,12 +670,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
-# CONFIG_TMPFS is not set
+CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -584,19 +690,31 @@ CONFIG_RAMFS=y
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
+CONFIG_UFS_FS=y
+CONFIG_UFS_FS_WRITE=y
 
 #
 # Network File Systems
 #
-# CONFIG_NFS_FS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
-# CONFIG_EXPORTFS is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -631,9 +749,26 @@ CONFIG_ULTRIX_PARTITION=y
 #
 # Kernel hacking
 #
-# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_KGDB is not set
+# CONFIG_RUNTIME_DEBUG is not set
+# CONFIG_MIPS_UNCACHED is not set
 
 #
 # Security options
@@ -645,7 +780,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -655,7 +814,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig
index ba2ec01defb1..c9070cef08b1 100644
--- a/arch/mips/configs/e55_defconfig
+++ b/arch/mips/configs/e55_defconfig
@@ -1,111 +1,91 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:03 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:14 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-CONFIG_MACH_VR41XX=y
-# CONFIG_NEC_CMBVR4133 is not set
-CONFIG_CASIO_E55=y
-# CONFIG_IBM_WORKPAD is not set
-# CONFIG_TANBAC_TB0226 is not set
-# CONFIG_TANBAC_TB0229 is not set
-# CONFIG_VICTOR_MPC30X is not set
-# CONFIG_ZAO_CAPCELLA is not set
-# CONFIG_VRC4171 is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+CONFIG_MACH_VR41XX=y
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_NEC_CMBVR4133 is not set
+CONFIG_CASIO_E55=y
+# CONFIG_IBM_WORKPAD is not set
+# CONFIG_TANBAC_TB022X is not set
+# CONFIG_VICTOR_MPC30X is not set
+# CONFIG_ZAO_CAPCELLA is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 CONFIG_CPU_VR41XX=y
@@ -121,15 +101,109 @@ CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_VR41XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_ISA=y
@@ -141,11 +215,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-CONFIG_PCMCIA_PROBE=y
-
-#
 # PCI Hotplug Support
 #
 
@@ -157,6 +226,81 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
 # Device Drivers
 #
 
@@ -168,6 +312,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -185,27 +334,13 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -237,6 +372,7 @@ CONFIG_IDE_GENERIC=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 
 #
@@ -252,6 +388,7 @@ CONFIG_IDE_GENERIC=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -262,76 +399,13 @@ CONFIG_IDE_GENERIC=y
 #
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
+# Network device support
 #
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -339,12 +413,25 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 # CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_NET_VENDOR_RACAL is not set
 # CONFIG_AT1700 is not set
@@ -352,7 +439,6 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_HP100 is not set
 # CONFIG_NET_ISA is not set
 # CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -380,6 +466,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -401,26 +489,14 @@ CONFIG_INPUT=y
 #
 CONFIG_INPUT_MOUSEDEV=y
 CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
 # CONFIG_INPUT_JOYDEV is not set
 # CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -430,6 +506,16 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -440,16 +526,15 @@ CONFIG_HW_CONSOLE=y
 #
 # Serial drivers
 #
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
 
 #
 # Non-8250 serial port support
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_VR41XX=y
+CONFIG_SERIAL_VR41XX_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -478,16 +563,23 @@ CONFIG_WATCHDOG=y
 # CONFIG_WDT is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
+# CONFIG_RTC_VR41XX is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
+CONFIG_GPIO_VR41XX=y
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -498,10 +590,20 @@ CONFIG_WATCHDOG=y
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -522,7 +624,6 @@ CONFIG_WATCHDOG=y
 # CONFIG_VGA_CONSOLE is not set
 # CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -536,7 +637,7 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
@@ -552,24 +653,31 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # InfiniBand support
 #
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -590,12 +698,10 @@ CONFIG_AUTOFS4_FS=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -617,16 +723,17 @@ CONFIG_RAMFS=y
 #
 # Network File Systems
 #
-CONFIG_NFS_FS=y
+CONFIG_NFS_FS=m
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
+CONFIG_NFSD=m
 # CONFIG_NFSD_V3 is not set
 # CONFIG_NFSD_TCP is not set
-CONFIG_LOCKD=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
+CONFIG_LOCKD=m
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -634,6 +741,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -654,9 +762,11 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+CONFIG_CMDLINE="console=ttyVR0,19200 mem=8M"
 
 #
 # Security options
@@ -668,7 +778,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -678,7 +812,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
+CONFIG_CRC16=m
+CONFIG_CRC32=m
 CONFIG_LIBCRC32C=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/ev64120_defconfig b/arch/mips/configs/ev64120_defconfig
index 17e87f70f602..14e3815f11e6 100644
--- a/arch/mips/configs/ev64120_defconfig
+++ b/arch/mips/configs/ev64120_defconfig
@@ -1,96 +1,76 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:03 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:16 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_KMOD is not set
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 CONFIG_MIPS_EV64120=y
-# CONFIG_EVB_PCI1 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_EVB_PCI1 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_MIPS_GT64120=y
 # CONFIG_SYSCLK_75 is not set
 # CONFIG_SYSCLK_83 is not set
@@ -100,8 +80,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -117,24 +99,117 @@ CONFIG_CPU_R5000=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R5000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_KMOD is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -143,10 +218,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -159,6 +230,82 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
 # Device Drivers
 #
 
@@ -167,7 +314,12 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
@@ -186,7 +338,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -197,19 +348,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -220,6 +361,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
 
 #
@@ -230,6 +372,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -242,77 +385,13 @@ CONFIG_ATA_OVER_ETH=m
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
+# Network device support
 #
-# CONFIG_PACKET is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -320,12 +399,27 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -345,12 +439,16 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -363,6 +461,8 @@ CONFIG_NET_ETHERNET=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -377,10 +477,13 @@ CONFIG_PPP_ASYNC=y
 # CONFIG_PPP_SYNC_TTY is not set
 # CONFIG_PPP_DEFLATE is not set
 # CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
 # CONFIG_PPPOE is not set
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -410,19 +513,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -432,6 +522,17 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -452,6 +553,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -478,6 +580,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -488,10 +596,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -511,7 +629,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -521,12 +638,12 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
@@ -545,21 +662,29 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -580,12 +705,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -614,7 +737,7 @@ CONFIG_NFS_FS=y
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -623,6 +746,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -643,7 +767,9 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs rw nfsroot=192.168.1.1:/mnt/disk2/fs.gal ip=192.168.1.211:192.168.1.1:::gt::"
 
@@ -657,7 +783,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -667,7 +817,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC32 is not set
+CONFIG_CRC16=m
+CONFIG_CRC32=m
 CONFIG_LIBCRC32C=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/ev96100_defconfig b/arch/mips/configs/ev96100_defconfig
index 9da4140eae00..510819581d8a 100644
--- a/arch/mips/configs/ev96100_defconfig
+++ b/arch/mips/configs/ev96100_defconfig
@@ -1,95 +1,75 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:03 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:18 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_KMOD is not set
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 CONFIG_MIPS_EV96100=y
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_MIPS_GT64120=y
 CONFIG_SWAP_IO_SPACE=y
@@ -99,8 +79,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -116,6 +98,18 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 CONFIG_CPU_RM7000=y
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R5000=y
+CONFIG_SYS_HAS_CPU_RM7000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -123,14 +117,98 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_BOARD_SCACHE=y
 CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_KMOD is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
@@ -143,10 +221,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 
@@ -158,6 +232,82 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
 # Device Drivers
 #
 
@@ -169,6 +319,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -185,25 +340,14 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -214,6 +358,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
 
 #
@@ -224,6 +369,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -234,77 +380,27 @@ CONFIG_ATA_OVER_ETH=m
 #
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
+# Network device support
 #
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
 
 #
-# QoS and/or fair queueing
+# PHY device support
 #
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
+CONFIG_PHYLIB=m
 
 #
-# Network testing
+# MII PHY device drivers
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -338,6 +434,8 @@ CONFIG_MIPS_GT96100ETH=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -367,18 +465,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -388,6 +474,16 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -429,10 +525,15 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -443,10 +544,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -466,7 +577,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -480,7 +590,7 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
@@ -496,24 +606,31 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # InfiniBand support
 #
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -534,12 +651,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -568,7 +683,7 @@ CONFIG_NFS_FS=y
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -577,6 +692,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -597,7 +713,9 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -611,7 +729,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -621,7 +763,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
+CONFIG_CRC16=m
+CONFIG_CRC32=m
 CONFIG_LIBCRC32C=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig
index 17fa5c4e3ad1..67979e3e606e 100644
--- a/arch/mips/configs/ip22_defconfig
+++ b/arch/mips/configs/ip22_defconfig
@@ -1,97 +1,76 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:04 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:20 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 CONFIG_SGI_IP22=y
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_ARC=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_SWAP_IO_SPACE=y
 CONFIG_ARC32=y
@@ -103,8 +82,10 @@ CONFIG_ARC_PROMLIB=y
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -120,84 +101,101 @@ CONFIG_CPU_R5000=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R4X00=y
+CONFIG_SYS_HAS_CPU_R5000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_BOARD_SCACHE=y
 CONFIG_IP22_CPU_SCACHE=y
+# CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
 
 #
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-# CONFIG_EISA is not set
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PC-card bridges
-#
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
+# Code maturity level options
 #
-# CONFIG_MTD is not set
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
-# Parallel port support
+# General setup
 #
-# CONFIG_PARPORT is not set
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
-# Plug and Play support
+# Loadable module support
 #
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
 
 #
-# Block devices
+# Block layer
 #
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
 
 #
 # IO Schedulers
@@ -206,69 +204,37 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=m
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-CONFIG_SGIWD93_SCSI=y
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
 
 #
-# Multi-device support (RAID and LVM)
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
-# CONFIG_MD is not set
+CONFIG_HW_HAS_EISA=y
+# CONFIG_EISA is not set
+CONFIG_MMU=y
 
 #
-# Fusion MPT device support
+# PCCARD (PCMCIA/CardBus) support
 #
+# CONFIG_PCCARD is not set
 
 #
-# IEEE 1394 (FireWire) support
+# PCI Hotplug Support
 #
 
 #
-# I2O device support
+# Executable file formats
 #
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+CONFIG_TRAD_SIGNALS=y
 
 #
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -277,12 +243,14 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
 CONFIG_NET_KEY=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 # CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
@@ -296,8 +264,10 @@ CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
 
 #
 # IP: Virtual Server Configuration
@@ -343,16 +313,27 @@ CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
 #
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
 # IP: Netfilter Configuration
 #
 CONFIG_IP_NF_CONNTRACK=m
 CONFIG_IP_NF_CT_ACCT=y
 CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
+CONFIG_IP_NF_CONNTRACK_NETLINK=m
 # CONFIG_IP_NF_CT_PROTO_SCTP is not set
 CONFIG_IP_NF_FTP=m
 CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_PPTP=m
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_LIMIT=m
@@ -376,14 +357,18 @@ CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_REALM=m
 CONFIG_IP_NF_MATCH_SCTP=m
+CONFIG_IP_NF_MATCH_DCCP=m
 CONFIG_IP_NF_MATCH_COMMENT=m
 CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -395,12 +380,14 @@ CONFIG_IP_NF_NAT_IRC=m
 CONFIG_IP_NF_NAT_FTP=m
 CONFIG_IP_NF_NAT_TFTP=m
 CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_NAT_PPTP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_DSCP=m
 CONFIG_IP_NF_TARGET_MARK=m
 CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_TARGET_CONNMARK=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
@@ -410,7 +397,7 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
 #
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
@@ -429,11 +416,17 @@ CONFIG_IP6_NF_MATCH_LENGTH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_NFQUEUE=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
 
 #
 # SCTP Configuration (EXPERIMENTAL)
@@ -464,6 +457,10 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_CLK_JIFFIES is not set
 CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
 # CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
@@ -476,37 +473,169 @@ CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
+
+#
+# Classification
+#
 CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
 CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
 CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
 # CONFIG_CLS_U32_PERF is not set
-# CONFIG_NET_CLS_IND is not set
 # CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_POLICE=y
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_ESTIMATOR=y
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_CHR_DEV_SG is not set
+CONFIG_CHR_DEV_SCH=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=m
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+
+#
+# SCSI low-level drivers
+#
+CONFIG_ISCSI_TCP=m
+CONFIG_SGIWD93_SCSI=y
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 CONFIG_EQUALIZER=m
 CONFIG_TUN=m
-CONFIG_ETHERTAP=m
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -540,6 +669,8 @@ CONFIG_SGISEEQ=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -569,18 +700,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
@@ -598,6 +717,16 @@ CONFIG_MOUSE_SERIAL=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -644,11 +773,16 @@ CONFIG_SGI_DS1286=m
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
 CONFIG_RAW_DRIVER=m
 CONFIG_MAX_RAW_DEVS=256
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -659,10 +793,20 @@ CONFIG_MAX_RAW_DEVS=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -693,7 +837,6 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 CONFIG_LOGO_SGI_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -707,7 +850,7 @@ CONFIG_LOGO_SGI_CLUT224=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
@@ -723,13 +866,17 @@ CONFIG_LOGO_SGI_CLUT224=y
 #
 # InfiniBand support
 #
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=m
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -741,12 +888,14 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
+CONFIG_XFS_EXPORT=y
 CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 # CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
 CONFIG_MINIX_FS=m
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 CONFIG_QUOTA=y
 # CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=m
@@ -754,6 +903,7 @@ CONFIG_QUOTACTL=y
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -781,12 +931,10 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -811,15 +959,20 @@ CONFIG_UFS_FS=m
 #
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
 # CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
 CONFIG_RPCSEC_GSS_KRB5=m
@@ -835,6 +988,7 @@ CONFIG_CIFS=m
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -908,7 +1062,9 @@ CONFIG_NLS_UTF8=m
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -931,6 +1087,7 @@ CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
@@ -942,10 +1099,10 @@ CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -955,9 +1112,12 @@ CONFIG_CRYPTO_TEST=m
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=m
 CONFIG_CRC32=m
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index b2a67da1e031..03af44d1d846 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -1,111 +1,92 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:04 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:21 2005
 #
 CONFIG_MIPS=y
-CONFIG_64BIT=y
-CONFIG_64BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_LOCK_KERNEL=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
 CONFIG_SGI_IP27=y
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 # CONFIG_SGI_SN0_N_MODE is not set
 CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
 CONFIG_NUMA=y
 # CONFIG_MAPPED_KERNEL is not set
 # CONFIG_REPLICATE_KTEXT is not set
 # CONFIG_REPLICATE_EXHANDLERS is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
-# CONFIG_SNI_RM200_PCI is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_ARC=y
 CONFIG_DMA_IP27=y
+CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_MIPS_L1_CACHE_SHIFT=7
 CONFIG_ARC64=y
 CONFIG_BOOT_ELF64=y
-CONFIG_QL_ISP_A64=y
 
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -121,27 +102,123 @@ CONFIG_CPU_R10000=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R10000=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_SMP=y
 CONFIG_NR_CPUS=64
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_BKL=y
 # CONFIG_MIPS_INSANE_LARGE is not set
 
 #
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_CPUSETS=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -150,10 +227,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -163,7 +236,7 @@ CONFIG_MMU=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-# CONFIG_BUILD_ELF64 is not set
+CONFIG_BUILD_ELF64=y
 CONFIG_MIPS32_COMPAT=y
 CONFIG_COMPAT=y
 CONFIG_MIPS32_O32=y
@@ -171,6 +244,122 @@ CONFIG_MIPS32_O32=y
 CONFIG_BINFMT_ELF32=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+CONFIG_NET_SCHED=y
+# CONFIG_NET_SCH_CLK_JIFFIES is not set
+CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
+# CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_INGRESS=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_POLICE=y
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_ESTIMATOR=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
 # Device Drivers
 #
 
@@ -179,7 +368,12 @@ CONFIG_BINFMT_ELF32=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
@@ -198,7 +392,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -210,18 +403,9 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -232,6 +416,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -241,8 +426,10 @@ CONFIG_SCSI_PROC_FS=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
 # CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -256,11 +443,13 @@ CONFIG_SCSI_LOGGING=y
 #
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
 
 #
 # SCSI low-level drivers
 #
+CONFIG_ISCSI_TCP=m
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -270,27 +459,25 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-CONFIG_SCSI_QLOGIC_ISP=y
 # CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLOGIC_1280=y
 CONFIG_SCSI_QLA2XXX=y
 # CONFIG_SCSI_QLA21XX is not set
 # CONFIG_SCSI_QLA22XX is not set
 # CONFIG_SCSI_QLA2300 is not set
 # CONFIG_SCSI_QLA2322 is not set
 # CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -313,11 +500,16 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
 
 #
 # Fusion MPT device support
 #
 # CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -330,107 +522,13 @@ CONFIG_DM_ZERO=m
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
+# Network device support
 #
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-# CONFIG_NET_SCH_CLK_JIFFIES is not set
-CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
-# CONFIG_NET_SCH_CLK_CPU is not set
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -438,6 +536,20 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -447,6 +559,7 @@ CONFIG_SGI_IOC3_ETH_HW_RX_CSUM=y
 CONFIG_SGI_IOC3_ETH_HW_TX_CSUM=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -466,12 +579,16 @@ CONFIG_SGI_IOC3_ETH_HW_TX_CSUM=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -484,6 +601,8 @@ CONFIG_SGI_IOC3_ETH_HW_TX_CSUM=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -496,6 +615,8 @@ CONFIG_SGI_IOC3_ETH_HW_TX_CSUM=y
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -513,25 +634,15 @@ CONFIG_SGI_IOC3_ETH_HW_TX_CSUM=y
 # CONFIG_INPUT is not set
 
 #
-# Userland interfaces
+# Hardware I/O ports
 #
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
 CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
 # CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_LIBPS2=m
 CONFIG_SERIO_RAW=m
-
-#
-# Input Device Drivers
-#
+# CONFIG_GAMEPORT is not set
 
 #
 # Character devices
@@ -549,7 +660,6 @@ CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
 # CONFIG_SERIAL_8250_RSA is not set
 
 #
@@ -557,6 +667,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -584,6 +695,12 @@ CONFIG_SGI_IP27_RTC=y
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -594,10 +711,20 @@ CONFIG_SGI_IP27_RTC=y
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -611,7 +738,6 @@ CONFIG_SGI_IP27_RTC=y
 # Graphics support
 #
 # CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -621,12 +747,12 @@ CONFIG_SGI_IP27_RTC=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
@@ -645,12 +771,17 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -662,17 +793,19 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
 CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_QUOTACTL=y
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -693,12 +826,10 @@ CONFIG_AUTOFS_FS=m
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -722,13 +853,14 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 # CONFIG_ROOT_NFS is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
@@ -738,6 +870,7 @@ CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -772,7 +905,9 @@ CONFIG_SGI_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=15
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -788,28 +923,29 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
 CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -819,9 +955,8 @@ CONFIG_CRYPTO_TEST=m
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig
index b26e1173365d..cba2a49cceb1 100644
--- a/arch/mips/configs/ip32_defconfig
+++ b/arch/mips/configs/ip32_defconfig
@@ -1,91 +1,78 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:04 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:24 2005
 #
 CONFIG_MIPS=y
-CONFIG_64BIT=y
-CONFIG_64BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 CONFIG_SGI_IP32=y
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_ARC=y
 CONFIG_DMA_IP32=y
-CONFIG_OWN_DMA=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_OWN_DMA=y
+CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_ARC32=y
 CONFIG_BOOT_ELF32=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -95,8 +82,10 @@ CONFIG_ARC_PROMLIB=y
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -112,6 +101,17 @@ CONFIG_CPU_R5000=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R5000=y
+CONFIG_SYS_HAS_CPU_RM7000=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -119,18 +119,94 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_BOARD_SCACHE=y
 CONFIG_R5000_CPU_SCACHE=y
 CONFIG_RM7000_CPU_SCACHE=y
+# CONFIG_MIPS_MT is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
 
 #
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -139,10 +215,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -160,6 +232,83 @@ CONFIG_MIPS32_O32=y
 CONFIG_BINFMT_ELF32=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+
+#
 # Device Drivers
 #
 
@@ -168,7 +317,13 @@ CONFIG_BINFMT_ELF32=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
 
 #
 # Memory Technology Devices (MTD)
@@ -187,7 +342,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -199,18 +353,9 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=y
 
 #
@@ -221,6 +366,7 @@ CONFIG_ATA_OVER_ETH=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=y
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -233,6 +379,7 @@ CONFIG_CHR_DEV_OSST=y
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -244,13 +391,15 @@ CONFIG_SCSI_LOGGING=y
 #
 # SCSI Transport Attributes
 #
-# CONFIG_SCSI_SPI_ATTRS is not set
+CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_SAS_ATTRS=y
 
 #
 # SCSI low-level drivers
 #
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -265,19 +414,15 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 CONFIG_SCSI_QLA2XXX=y
@@ -286,6 +431,8 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_SCSI_QLA2300 is not set
 # CONFIG_SCSI_QLA2322 is not set
 # CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -299,6 +446,9 @@ CONFIG_SCSI_QLA2XXX=y
 # Fusion MPT device support
 #
 # CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -311,78 +461,13 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
+# Network device support
 #
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -390,6 +475,20 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -397,6 +496,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_SGI_O2MACE_ETH=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -416,12 +516,16 @@ CONFIG_SGI_O2MACE_ETH=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -434,6 +538,8 @@ CONFIG_SGI_O2MACE_ETH=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=y
 
 #
 # Wan interfaces
@@ -446,6 +552,8 @@ CONFIG_SGI_O2MACE_ETH=y
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -475,27 +583,25 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
 #
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
 CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
 # CONFIG_SERIO_PCIPS2 is not set
 # CONFIG_SERIO_MACEPS2 is not set
 # CONFIG_SERIO_LIBPS2 is not set
 CONFIG_SERIO_RAW=y
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+# CONFIG_GAMEPORT is not set
 
 #
 # Character devices
@@ -518,6 +624,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -544,6 +651,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -554,10 +667,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -577,7 +700,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -587,12 +709,12 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
@@ -611,21 +733,29 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -646,13 +776,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
 
 #
 # Miscellaneous filesystems
@@ -676,13 +803,14 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -691,6 +819,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -721,7 +850,9 @@ CONFIG_SGI_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -735,7 +866,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -745,7 +900,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/it8172_defconfig b/arch/mips/configs/it8172_defconfig
index 08bd3ad64761..e7ee1679af90 100644
--- a/arch/mips/configs/it8172_defconfig
+++ b/arch/mips/configs/it8172_defconfig
@@ -1,97 +1,76 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:05 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:26 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 CONFIG_MIPS_ITE8172=y
-# CONFIG_IT8172_REVC is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_IT8172_REVC is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_ITE_BOARD_GEN=y
 CONFIG_IT8172_CIR=y
 CONFIG_IT8712=y
@@ -100,8 +79,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -117,17 +98,113 @@ CONFIG_CPU_NEVADA=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R5432=y
+CONFIG_SYS_HAS_CPU_NEVADA=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
@@ -140,10 +217,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 
@@ -155,6 +228,83 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
 # Device Drivers
 #
 
@@ -166,12 +316,17 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
 # Memory Technology Devices (MTD)
 #
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_PARTITIONS is not set
 # CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_PARTITIONS is not set
 
 #
 # User Modules And Translation Layers
@@ -182,6 +337,7 @@ CONFIG_MTD_CHAR=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -207,7 +363,6 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
 
 #
 # Mapping drivers for chip access
@@ -217,6 +372,7 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_START=0x8000000
 CONFIG_MTD_PHYSMAP_LEN=0x2000000
 CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
@@ -240,6 +396,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_MTD_NAND is not set
 
 #
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
 # Parallel port support
 #
 # CONFIG_PARPORT is not set
@@ -251,26 +412,15 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -302,6 +452,7 @@ CONFIG_IDE_GENERIC=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
 
 #
@@ -312,6 +463,7 @@ CONFIG_IDE_GENERIC=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -322,78 +474,27 @@ CONFIG_IDE_GENERIC=y
 #
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
+# Network device support
 #
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
 
 #
-# QoS and/or fair queueing
+# PHY device support
 #
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
+CONFIG_PHYLIB=m
 
 #
-# Network testing
+# MII PHY device drivers
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -426,6 +527,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -455,18 +558,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -476,6 +567,16 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -521,10 +622,15 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -535,10 +641,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -558,7 +674,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -574,16 +689,10 @@ CONFIG_SOUND=y
 # Open Sound System
 #
 CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_CS4281 is not set
-# CONFIG_SOUND_SONICVIBES is not set
+# CONFIG_OBSOLETE_OSS_DRIVER is not set
 CONFIG_SOUND_IT8172=y
-# CONFIG_SOUND_TRIDENT is not set
 # CONFIG_SOUND_MSNDCLAS is not set
 # CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_OSS is not set
-# CONFIG_SOUND_AD1980 is not set
 
 #
 # USB support
@@ -592,7 +701,7 @@ CONFIG_SOUND_IT8172=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
@@ -608,24 +717,31 @@ CONFIG_SOUND_IT8172=y
 #
 # InfiniBand support
 #
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -646,12 +762,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -682,7 +796,7 @@ CONFIG_NFS_FS=y
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -691,6 +805,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -711,7 +826,9 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -725,7 +842,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -735,7 +876,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
+CONFIG_CRC16=m
+CONFIG_CRC32=m
 CONFIG_LIBCRC32C=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/ivr_defconfig b/arch/mips/configs/ivr_defconfig
index 583ef5c5b1cd..138c8a60a4dc 100644
--- a/arch/mips/configs/ivr_defconfig
+++ b/arch/mips/configs/ivr_defconfig
@@ -1,96 +1,75 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:05 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:27 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 CONFIG_MIPS_IVR=y
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_ITE_BOARD_GEN=y
 CONFIG_IT8172_CIR=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -98,8 +77,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -115,23 +96,117 @@ CONFIG_CPU_NEVADA=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_NEVADA=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -140,10 +215,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -156,6 +227,83 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
 # Device Drivers
 #
 
@@ -164,7 +312,12 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
@@ -183,7 +336,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -194,19 +346,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -239,6 +381,7 @@ CONFIG_IDE_GENERIC=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
 
 #
@@ -249,6 +392,7 @@ CONFIG_IDE_GENERIC=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -261,78 +405,13 @@ CONFIG_IDE_GENERIC=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
+# Network device support
 #
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -340,12 +419,27 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -365,12 +459,16 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -383,6 +481,8 @@ CONFIG_NET_ETHERNET=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -394,6 +494,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -423,19 +525,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -445,6 +534,17 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -452,7 +552,8 @@ CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 CONFIG_QTRONIX_KEYBOARD=y
-# CONFIG_IT8172_SCR0 is not set
+CONFIG_IT8172_SCR0=y
+CONFIG_IT8172_SCR1=y
 
 #
 # Serial drivers
@@ -467,6 +568,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -492,6 +594,12 @@ CONFIG_RTC=y
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -502,10 +610,20 @@ CONFIG_RTC=y
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -525,7 +643,6 @@ CONFIG_RTC=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -535,12 +652,12 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
@@ -559,21 +676,29 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -594,12 +719,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -628,7 +751,7 @@ CONFIG_NFS_FS=y
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -637,6 +760,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -657,7 +781,9 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -671,7 +797,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -681,7 +831,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
+CONFIG_CRC16=m
+CONFIG_CRC32=m
 CONFIG_LIBCRC32C=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/jaguar-atx_defconfig b/arch/mips/configs/jaguar-atx_defconfig
index 8abb5a0c6c12..6238e0d6a430 100644
--- a/arch/mips/configs/jaguar-atx_defconfig
+++ b/arch/mips/configs/jaguar-atx_defconfig
@@ -1,89 +1,77 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:05 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:29 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
-
-#
-# Code maturity level options
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+CONFIG_MOMENCO_JAGUAR_ATX=y
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-CONFIG_MOMENCO_JAGUAR_ATX=y
-CONFIG_JAGUAR_DMALOW=y
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_JAGUAR_DMALOW=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_LIMITED_DMA=y
+CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_IRQ_CPU_RM7K=y
 CONFIG_IRQ_MV64340=y
@@ -95,8 +83,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -112,6 +102,17 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_CPU_RM7000 is not set
 CONFIG_CPU_RM9000=y
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_RM9000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -119,22 +120,100 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_BOARD_SCACHE=y
 CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_HIGHMEM=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_SMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
+# Code maturity level options
+#
+# CONFIG_EXPERIMENTAL is not set
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -143,10 +222,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 
@@ -158,6 +233,71 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_NETFILTER is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
 # Device Drivers
 #
 
@@ -166,7 +306,12 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
@@ -185,7 +330,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -195,19 +339,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -218,6 +352,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
 
 #
@@ -228,6 +363,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -240,58 +376,8 @@ CONFIG_ATA_OVER_ETH=m
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
+# Network device support
 #
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -304,12 +390,27 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -343,9 +444,11 @@ CONFIG_EEPRO100=y
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 CONFIG_MV643XX_ETH=y
 CONFIG_MV643XX_ETH_0=y
 CONFIG_MV643XX_ETH_1=y
@@ -354,6 +457,7 @@ CONFIG_MV643XX_ETH_2=y
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -366,6 +470,8 @@ CONFIG_MV643XX_ETH_2=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -374,6 +480,8 @@ CONFIG_MV643XX_ETH_2=y
 # CONFIG_FDDI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -391,20 +499,10 @@ CONFIG_MV643XX_ETH_2=y
 # CONFIG_INPUT is not set
 
 #
-# Userland interfaces
+# Hardware I/O ports
 #
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 # CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
+# CONFIG_GAMEPORT is not set
 
 #
 # Character devices
@@ -425,6 +523,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -451,6 +550,10 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -461,10 +564,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -478,7 +591,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Graphics support
 #
 # CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -488,12 +600,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
@@ -512,6 +624,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 # CONFIG_EXT2_FS is not set
@@ -519,13 +635,16 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -546,10 +665,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -570,7 +689,7 @@ CONFIG_NFS_FS=y
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
@@ -591,7 +710,9 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -605,7 +726,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -615,7 +760,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=m
+CONFIG_CRC32=m
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig
index da5d9ee2ecce..a8ded3d74152 100644
--- a/arch/mips/configs/jmr3927_defconfig
+++ b/arch/mips/configs/jmr3927_defconfig
@@ -1,89 +1,75 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:06 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:31 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-CONFIG_TOSHIBA_JMR3927=y
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+CONFIG_TOSHIBA_JMR3927=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_MIPS_TX3927=y
 CONFIG_SWAP_IO_SPACE=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -92,8 +78,10 @@ CONFIG_TOSHIBA_BOARDS=y
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 CONFIG_CPU_TX39XX=y
 # CONFIG_CPU_VR41XX is not set
@@ -109,22 +97,107 @@ CONFIG_CPU_TX39XX=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_TX39XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_RTC_DS1742=y
 
 #
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -133,10 +206,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -149,6 +218,83 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+
+#
 # Device Drivers
 #
 
@@ -157,7 +303,13 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
 
 #
 # Memory Technology Devices (MTD)
@@ -176,7 +328,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -187,19 +338,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=y
 
 #
@@ -210,6 +351,7 @@ CONFIG_ATA_OVER_ETH=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=y
 # CONFIG_SCSI is not set
 
 #
@@ -220,6 +362,7 @@ CONFIG_ATA_OVER_ETH=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -232,78 +375,13 @@ CONFIG_ATA_OVER_ETH=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
+# Network device support
 #
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -311,12 +389,27 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -336,12 +429,16 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -354,6 +451,8 @@ CONFIG_NET_ETHERNET=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=y
 
 #
 # Wan interfaces
@@ -365,6 +464,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -394,19 +495,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -416,6 +504,17 @@ CONFIG_SERIO_RAW=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -426,11 +525,9 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_ROCKETPORT is not set
 # CONFIG_CYCLADES is not set
 # CONFIG_DIGIEPCA is not set
-# CONFIG_DIGI is not set
 # CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
-# CONFIG_SYNCLINK is not set
 # CONFIG_SYNCLINKMP is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_RISCOM8 is not set
@@ -438,10 +535,6 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_SX is not set
 # CONFIG_RIO is not set
 # CONFIG_STALDRV is not set
-# CONFIG_SERIAL_TX3912 is not set
-CONFIG_TXX927_SERIAL=y
-CONFIG_TXX927_SERIAL_CONSOLE=y
-# CONFIG_SERIAL_TXX9 is not set
 
 #
 # Serial drivers
@@ -451,6 +544,8 @@ CONFIG_TXX927_SERIAL_CONSOLE=y
 #
 # Non-8250 serial port support
 #
+CONFIG_HAS_TXX9_SERIAL=y
+# CONFIG_SERIAL_JSM is not set
 # CONFIG_UNIX98_PTYS is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -477,6 +572,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -487,10 +588,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -504,6 +615,10 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Graphics support
 #
 CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_MACMODES is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_CIRRUS is not set
@@ -511,6 +626,8 @@ CONFIG_FB=y
 # CONFIG_FB_CYBER2000 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
 # CONFIG_FB_RADEON_OLD is not set
@@ -523,8 +640,9 @@ CONFIG_FB=y
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_SMIVGX is not set
+# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_E1356 is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -548,12 +666,12 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
@@ -572,6 +690,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 # CONFIG_EXT2_FS is not set
@@ -579,13 +701,16 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -606,10 +731,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
 
 #
 # Miscellaneous filesystems
@@ -638,7 +763,7 @@ CONFIG_NFS_FS=y
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -647,6 +772,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -667,7 +793,9 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -681,7 +809,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -691,7 +843,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/lasat200_defconfig b/arch/mips/configs/lasat200_defconfig
index 8d600ae890f4..a7ad99b12fe5 100644
--- a/arch/mips/configs/lasat200_defconfig
+++ b/arch/mips/configs/lasat200_defconfig
@@ -1,108 +1,90 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:06 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:33 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-CONFIG_LASAT=y
-CONFIG_PICVUE=y
-CONFIG_PICVUE_PROC=y
-CONFIG_DS1603=y
-CONFIG_LASAT_SYSCTL=y
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+CONFIG_LASAT=y
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_PICVUE=y
+CONFIG_PICVUE_PROC=y
+CONFIG_DS1603=y
+CONFIG_LASAT_SYSCTL=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_MIPS_NILE4=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_MIPS_GT64120=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -118,26 +100,119 @@ CONFIG_CPU_R5000=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R5000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_BOARD_SCACHE=y
 CONFIG_R5000_CPU_SCACHE=y
+# CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_NAMES is not set
 CONFIG_MMU=y
 
 #
@@ -146,10 +221,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -162,6 +233,79 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
 # Device Drivers
 #
 
@@ -170,15 +314,20 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
 #
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 
@@ -190,6 +339,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -223,6 +373,7 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_LASAT=y
+# CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
@@ -247,6 +398,11 @@ CONFIG_MTD_LASAT=y
 # CONFIG_MTD_NAND is not set
 
 #
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
 # Parallel port support
 #
 # CONFIG_PARPORT is not set
@@ -258,7 +414,6 @@ CONFIG_MTD_LASAT=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -269,19 +424,9 @@ CONFIG_MTD_LASAT=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -326,6 +471,7 @@ CONFIG_BLK_DEV_CMD64X=y
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
 # CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -343,6 +489,7 @@ CONFIG_IDEDMA_AUTO=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
 
 #
@@ -353,6 +500,7 @@ CONFIG_IDEDMA_AUTO=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -365,68 +513,8 @@ CONFIG_IDEDMA_AUTO=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
+# Network device support
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -439,12 +527,27 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -464,12 +567,16 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -482,6 +589,8 @@ CONFIG_NET_ETHERNET=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -493,6 +602,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -522,19 +633,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -544,6 +642,17 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -564,6 +673,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -590,6 +700,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -600,10 +716,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -623,7 +749,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -633,12 +758,12 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
@@ -657,10 +782,15 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -670,13 +800,16 @@ CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -697,12 +830,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -728,12 +859,13 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -742,6 +874,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -762,7 +895,9 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -776,7 +911,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -786,7 +945,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index 79519ac5af4a..d1c44216f1c1 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -1,99 +1,82 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:53:14 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:35 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 CONFIG_MIPS_MALTA=y
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_I8259=y
 CONFIG_MIPS_BONITO64=y
 CONFIG_MIPS_MSC=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
 CONFIG_MIPS_BOARDS_GEN=y
 CONFIG_MIPS_GT64120=y
 CONFIG_SWAP_IO_SPACE=y
@@ -104,8 +87,10 @@ CONFIG_HAVE_STD_PC_SERIAL_PORT=y
 #
 # CPU selection
 #
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -121,93 +106,106 @@ CONFIG_CPU_MIPS32=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_CPU_MIPS64_R1=y
+CONFIG_SYS_HAS_CPU_NEVADA=y
+CONFIG_SYS_HAS_CPU_RM7000=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT=y
+# CONFIG_MIPS_MT_SMP is not set
+CONFIG_MIPS_VPE_LOADER=y
+CONFIG_MIPS_VPE_LOADER_TOM=y
+CONFIG_MIPS_VPE_APSP_API=y
 # CONFIG_64BIT_PHYS_ADDR is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PC-card bridges
-#
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-
-#
-# Memory Technology Devices (MTD)
+# Code maturity level options
 #
-# CONFIG_MTD is not set
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
-# Parallel port support
+# General setup
 #
-# CONFIG_PARPORT is not set
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
-# Plug and Play support
+# Loadable module support
 #
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
 
 #
-# Block devices
+# Block layer
 #
-CONFIG_BLK_DEV_FD=m
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-CONFIG_BLK_DEV_UMEM=m
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
 
 #
 # IO Schedulers
@@ -216,175 +214,39 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-CONFIG_BLK_DEV_PIIX=y
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=m
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
 
 #
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=m
-CONFIG_SCSI_FC_ATTRS=m
-CONFIG_SCSI_ISCSI_ATTRS=m
-
-#
-# SCSI low-level drivers
-#
-CONFIG_BLK_DEV_3W_XXXX_RAID=m
-CONFIG_SCSI_3W_9XXX=m
-CONFIG_SCSI_ACARD=m
-CONFIG_SCSI_AACRAID=m
-CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
-CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
-CONFIG_AIC7XXX_DEBUG_MASK=0
-CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=m
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_LEGACY_PROC=y
+CONFIG_MMU=y
 
 #
-# Fusion MPT device support
+# PCCARD (PCMCIA/CardBus) support
 #
-# CONFIG_FUSION is not set
+# CONFIG_PCCARD is not set
 
 #
-# IEEE 1394 (FireWire) support
+# PCI Hotplug Support
 #
-# CONFIG_IEEE1394 is not set
+# CONFIG_HOTPLUG_PCI is not set
 
 #
-# I2O device support
+# Executable file formats
 #
-# CONFIG_I2O is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
 
 #
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -393,15 +255,20 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
 CONFIG_NET_KEY=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_FWMARK=y
 CONFIG_IP_ROUTE_MULTIPATH=y
+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
@@ -419,8 +286,10 @@ CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
 
 #
 # IP: Virtual Server Configuration
@@ -467,16 +336,27 @@ CONFIG_NETFILTER=y
 CONFIG_BRIDGE_NETFILTER=y
 
 #
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
 # IP: Netfilter Configuration
 #
 CONFIG_IP_NF_CONNTRACK=m
 CONFIG_IP_NF_CT_ACCT=y
 CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
+CONFIG_IP_NF_CONNTRACK_NETLINK=m
 CONFIG_IP_NF_CT_PROTO_SCTP=m
 CONFIG_IP_NF_FTP=m
 CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_PPTP=m
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_LIMIT=m
@@ -501,14 +381,18 @@ CONFIG_IP_NF_MATCH_PHYSDEV=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_REALM=m
 CONFIG_IP_NF_MATCH_SCTP=m
+CONFIG_IP_NF_MATCH_DCCP=m
 CONFIG_IP_NF_MATCH_COMMENT=m
 CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -520,12 +404,14 @@ CONFIG_IP_NF_NAT_IRC=m
 CONFIG_IP_NF_NAT_FTP=m
 CONFIG_IP_NF_NAT_TFTP=m
 CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_NAT_PPTP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_DSCP=m
 CONFIG_IP_NF_TARGET_MARK=m
 CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_TARGET_CONNMARK=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
@@ -535,7 +421,7 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
 #
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
@@ -555,8 +441,11 @@ CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_PHYSDEV=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_NFQUEUE=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 
 #
@@ -582,8 +471,11 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_ULOG=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
 
 #
 # SCTP Configuration (EXPERIMENTAL)
@@ -619,6 +511,10 @@ CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_CLK_JIFFIES=y
 # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
 # CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
@@ -631,37 +527,273 @@ CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
+
+#
+# Classification
+#
 CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
 CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
 CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
 # CONFIG_CLS_U32_PERF is not set
-CONFIG_NET_CLS_IND=y
 # CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_POLICE=y
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_ESTIMATOR=y
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+CONFIG_BLK_DEV_FD=m
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=m
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+
+#
+# SCSI low-level drivers
+#
+CONFIG_ISCSI_TCP=m
+CONFIG_BLK_DEV_3W_XXXX_RAID=m
+CONFIG_SCSI_3W_9XXX=m
+CONFIG_SCSI_ACARD=m
+CONFIG_SCSI_AACRAID=m
+CONFIG_SCSI_AIC7XXX=m
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=m
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID5=m
+CONFIG_MD_RAID6=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 CONFIG_EQUALIZER=m
 CONFIG_TUN=m
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -669,12 +801,27 @@ CONFIG_TUN=m
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -713,13 +860,17 @@ CONFIG_PCNET32=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -732,6 +883,8 @@ CONFIG_PCNET32=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -744,6 +897,8 @@ CONFIG_PCNET32=y
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -773,19 +928,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -795,6 +937,17 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -815,6 +968,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -840,6 +994,12 @@ CONFIG_RTC=y
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -850,10 +1010,20 @@ CONFIG_RTC=y
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -873,7 +1043,6 @@ CONFIG_RTC=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -883,12 +1052,12 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
@@ -907,10 +1076,15 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -931,12 +1105,14 @@ CONFIG_JFS_SECURITY=y
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
+CONFIG_XFS_EXPORT=y
 CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
 CONFIG_MINIX_FS=m
 CONFIG_ROMFS_FS=m
+CONFIG_INOTIFY=y
 CONFIG_QUOTA=y
 # CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
@@ -944,6 +1120,7 @@ CONFIG_QUOTACTL=y
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -971,12 +1148,10 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -1002,16 +1177,19 @@ CONFIG_UFS_FS=m
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
 # CONFIG_NFSD_TCP is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -1020,6 +1198,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1079,7 +1258,9 @@ CONFIG_NLS_UTF8=m
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -1101,6 +1282,7 @@ CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
@@ -1125,9 +1307,12 @@ CONFIG_CRYPTO_CRC32C=m
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig
new file mode 100644
index 000000000000..ac39ab7feeb7
--- /dev/null
+++ b/arch/mips/configs/mipssim_defconfig
@@ -0,0 +1,804 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:37 2005
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+CONFIG_MIPS_SIM=y
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT=y
+# CONFIG_MIPS_MT_SMP is not set
+CONFIG_MIPS_VPE_LOADER=y
+CONFIG_MIPS_VPE_LOADER_TOM=y
+CONFIG_MIPS_VPE_APSP_API=y
+# CONFIG_64BIT_PHYS_ADDR is not set
+# CONFIG_CPU_ADVANCED is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_MMU=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+CONFIG_NET_DIVERT=y
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_INGRESS=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+# CONFIG_NET_CLS_FW is not set
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+# CONFIG_NET_CLS_POLICE is not set
+CONFIG_NET_ESTIMATOR=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+
+#
+# Ethernet (10 or 100Mbit)
+#
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_MIPS_SIM_NET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+# CONFIG_SYSFS is not set
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE="nfsroot=192.168.192.169:/u1/mipsel,timeo=20 ip=dhcp"
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_KGDB is not set
+# CONFIG_RUNTIME_DEBUG is not set
+# CONFIG_MIPS_UNCACHED is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig
index 0fea57ef18f2..2b5ea37484e4 100644
--- a/arch/mips/configs/mpc30x_defconfig
+++ b/arch/mips/configs/mpc30x_defconfig
@@ -1,112 +1,93 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:07 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:39 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-CONFIG_MACH_VR41XX=y
-# CONFIG_NEC_CMBVR4133 is not set
-# CONFIG_CASIO_E55 is not set
-# CONFIG_IBM_WORKPAD is not set
-# CONFIG_TANBAC_TB0226 is not set
-# CONFIG_TANBAC_TB0229 is not set
-CONFIG_VICTOR_MPC30X=y
-# CONFIG_ZAO_CAPCELLA is not set
-CONFIG_PCI_VR41XX=y
-CONFIG_VRC4173=y
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+CONFIG_MACH_VR41XX=y
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_NEC_CMBVR4133 is not set
+# CONFIG_CASIO_E55 is not set
+# CONFIG_IBM_WORKPAD is not set
+# CONFIG_TANBAC_TB022X is not set
+CONFIG_VICTOR_MPC30X=y
+# CONFIG_ZAO_CAPCELLA is not set
+CONFIG_PCI_VR41XX=y
+CONFIG_VRC4173=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 CONFIG_CPU_VR41XX=y
@@ -122,31 +103,133 @@ CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_VR41XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
 # PCCARD (PCMCIA/CardBus) support
 #
-# CONFIG_PCCARD is not set
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+# CONFIG_CARDBUS is not set
 
 #
 # PC-card bridges
 #
+# CONFIG_YENTA is not set
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_PCMCIA_VRC4173=y
 
 #
 # PCI Hotplug Support
@@ -161,6 +244,81 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
 # Device Drivers
 #
 
@@ -169,7 +327,12 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
@@ -188,7 +351,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -197,31 +359,44 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_ATA_OVER_ETH=m
 
 #
-# IO Schedulers
+# ATA/ATAPI/MFM/RLL support
 #
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
 
 #
-# ATA/ATAPI/MFM/RLL support
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=m
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
 #
-# CONFIG_IDE is not set
+CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 
 #
@@ -232,6 +407,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -244,79 +420,13 @@ CONFIG_ATA_OVER_ETH=m
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
+# Network device support
 #
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -324,20 +434,14 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
-# Ethernet (10 or 100Mbit)
+# PHY device support
 #
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
 
 #
-# Tulip family network device support
+# Ethernet (10 or 100Mbit)
 #
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_MII=m
 
 #
 # Ethernet (1000 Mbit)
@@ -349,12 +453,16 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -366,7 +474,59 @@ CONFIG_NET_ETHERNET=y
 #
 # Wireless LAN (non-hamradio)
 #
-# CONFIG_NET_RADIO is not set
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+CONFIG_HERMES=m
+# CONFIG_PLX_HERMES is not set
+# CONFIG_TMD_HERMES is not set
+# CONFIG_NORTEL_HERMES is not set
+# CONFIG_PCI_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+CONFIG_PCMCIA_HERMES=m
+# CONFIG_PCMCIA_SPECTRUM is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+
+#
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
+#
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+CONFIG_NET_PCMCIA=y
+CONFIG_PCMCIA_3C589=m
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_PCMCIA_AXNET=m
 
 #
 # Wan interfaces
@@ -378,6 +538,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -407,19 +569,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -429,6 +578,17 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -439,16 +599,16 @@ CONFIG_HW_CONSOLE=y
 #
 # Serial drivers
 #
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
 
 #
 # Non-8250 serial port support
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_VR41XX=y
+CONFIG_SERIAL_VR41XX_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -464,6 +624,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_WATCHDOG is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
+# CONFIG_RTC_VR41XX is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -472,9 +633,23 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Ftape, the floppy tape device driver
 #
 # CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+CONFIG_GPIO_VR41XX=y
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -485,10 +660,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -508,7 +693,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -518,12 +702,122 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+CONFIG_USB_PEGASUS=m
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
 #
 
 #
@@ -542,21 +836,29 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -577,12 +879,10 @@ CONFIG_AUTOFS4_FS=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -609,9 +909,8 @@ CONFIG_NFS_FS=y
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -620,6 +919,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -640,9 +940,11 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+CONFIG_CMDLINE="mem=32M console=ttyVR0,19200"
 
 #
 # Security options
@@ -656,26 +958,27 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
 CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_TEST is not set
 
@@ -687,9 +990,8 @@ CONFIG_CRYPTO_CRC32C=m
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
+CONFIG_CRC16=m
+CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/ocelot_3_defconfig b/arch/mips/configs/ocelot_3_defconfig
index b4cf97a732bc..9081ea5a9dbd 100644
--- a/arch/mips/configs/ocelot_3_defconfig
+++ b/arch/mips/configs/ocelot_3_defconfig
@@ -1,96 +1,75 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:07 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:41 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 CONFIG_MOMENCO_OCELOT_3=y
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_IRQ_CPU_RM7K=y
 CONFIG_IRQ_MV64340=y
@@ -102,8 +81,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -119,6 +100,17 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_CPU_RM7000 is not set
 CONFIG_CPU_RM9000=y
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_RM9000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -126,22 +118,105 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_BOARD_SCACHE=y
 CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
-# CONFIG_HIGHMEM is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_SMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -150,10 +225,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -166,6 +237,117 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
 # Device Drivers
 #
 
@@ -174,7 +356,12 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
@@ -193,7 +380,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -205,17 +391,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -226,6 +402,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=m
 CONFIG_SCSI_PROC_FS=y
 
@@ -237,6 +414,7 @@ CONFIG_SCSI_PROC_FS=y
 # CONFIG_CHR_DEV_OSST is not set
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -250,11 +428,13 @@ CONFIG_SCSI_PROC_FS=y
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
 
 #
 # SCSI low-level drivers
 #
+CONFIG_ISCSI_TCP=m
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -265,19 +445,15 @@ CONFIG_SCSI_PROC_FS=y
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 CONFIG_SCSI_QLA2XXX=m
@@ -286,6 +462,8 @@ CONFIG_SCSI_QLA2XXX=m
 # CONFIG_SCSI_QLA2300 is not set
 # CONFIG_SCSI_QLA2322 is not set
 # CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
@@ -300,6 +478,9 @@ CONFIG_SCSI_QLA2XXX=m
 # Fusion MPT device support
 #
 # CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -312,105 +493,13 @@ CONFIG_SCSI_QLA2XXX=m
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_IPV6_TUNNEL is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
+# Network device support
 #
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -418,12 +507,27 @@ CONFIG_TUN=m
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -440,7 +544,6 @@ CONFIG_NET_PCI=y
 # CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 CONFIG_E100=y
-# CONFIG_E100_NAPI is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
@@ -463,9 +566,12 @@ CONFIG_E100=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 CONFIG_MV643XX_ETH=y
 CONFIG_MV643XX_ETH_0=y
 CONFIG_MV643XX_ETH_1=y
@@ -474,6 +580,7 @@ CONFIG_MV643XX_ETH_2=y
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -486,6 +593,8 @@ CONFIG_MV643XX_ETH_2=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -500,11 +609,14 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 # CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -531,19 +643,6 @@ CONFIG_INPUT=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -553,6 +652,17 @@ CONFIG_SERIO=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -573,6 +683,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -598,6 +709,12 @@ CONFIG_RTC=y
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -608,10 +725,20 @@ CONFIG_RTC=y
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -625,6 +752,10 @@ CONFIG_RTC=y
 # Graphics support
 #
 CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_MACMODES is not set
 CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_CIRRUS is not set
@@ -632,6 +763,8 @@ CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_CYBER2000 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
 # CONFIG_FB_RADEON_OLD is not set
@@ -644,8 +777,9 @@ CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_SMIVGX is not set
+# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_E1356 is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -654,6 +788,7 @@ CONFIG_FB_MODE_HELPERS=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
@@ -675,12 +810,12 @@ CONFIG_LOGO_LINUX_CLUT224=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
@@ -699,10 +834,15 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -715,17 +855,21 @@ CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_PROC_INFO is not set
 # CONFIG_REISERFS_FS_XATTR is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
+CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -746,15 +890,10 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -778,16 +917,19 @@ CONFIG_CRAMFS=y
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
 # CONFIG_NFSD_TCP is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -797,6 +939,7 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -856,7 +999,9 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="ip=any root=nfs"
 
@@ -869,7 +1014,31 @@ CONFIG_CMDLINE="ip=any root=nfs"
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -879,9 +1048,8 @@ CONFIG_CMDLINE="ip=any root=nfs"
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/ocelot_c_defconfig b/arch/mips/configs/ocelot_c_defconfig
index a38903db85a0..570fc4d18166 100644
--- a/arch/mips/configs/ocelot_c_defconfig
+++ b/arch/mips/configs/ocelot_c_defconfig
@@ -1,87 +1,75 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:07 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:43 2005
 #
 CONFIG_MIPS=y
-CONFIG_64BIT=y
-CONFIG_64BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-CONFIG_MOMENCO_OCELOT_C=y
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+CONFIG_MOMENCO_OCELOT_C=y
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_IRQ_MV64340=y
 CONFIG_PCI_MARVELL=y
@@ -91,8 +79,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -108,6 +98,17 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 CONFIG_CPU_RM7000=y
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_RM7000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -115,18 +116,94 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_BOARD_SCACHE=y
 CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -135,10 +212,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -156,6 +229,82 @@ CONFIG_MIPS32_N32=y
 CONFIG_BINFMT_ELF32=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+
+#
 # Device Drivers
 #
 
@@ -164,7 +313,13 @@ CONFIG_BINFMT_ELF32=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
 
 #
 # Memory Technology Devices (MTD)
@@ -183,7 +338,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -194,18 +348,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=y
 
 #
@@ -216,6 +361,7 @@ CONFIG_ATA_OVER_ETH=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=y
 # CONFIG_SCSI is not set
 
 #
@@ -226,6 +372,7 @@ CONFIG_ATA_OVER_ETH=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -238,77 +385,13 @@ CONFIG_ATA_OVER_ETH=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
+# Network device support
 #
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -316,12 +399,27 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -341,13 +439,17 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 # CONFIG_MV643XX_ETH is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -360,6 +462,8 @@ CONFIG_NET_ETHERNET=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=y
 
 #
 # Wan interfaces
@@ -371,6 +475,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -400,19 +506,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -422,6 +515,17 @@ CONFIG_SERIO_RAW=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -442,6 +546,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -468,6 +573,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -478,10 +589,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -501,7 +622,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -511,12 +631,12 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
@@ -535,21 +655,29 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -570,12 +698,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
 
 #
 # Miscellaneous filesystems
@@ -607,6 +733,7 @@ CONFIG_NFSD=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -615,6 +742,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -635,7 +763,9 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -649,7 +779,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -659,7 +813,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/ocelot_defconfig b/arch/mips/configs/ocelot_defconfig
index 920d59b56a4e..6634ab24715c 100644
--- a/arch/mips/configs/ocelot_defconfig
+++ b/arch/mips/configs/ocelot_defconfig
@@ -1,89 +1,75 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:08 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:44 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 CONFIG_MOMENCO_OCELOT=y
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_IRQ_CPU_RM7K=y
 CONFIG_MIPS_GT64120=y
@@ -96,8 +82,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -113,6 +101,17 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 CONFIG_CPU_RM7000=y
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_RM7000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -120,14 +119,92 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_BOARD_SCACHE=y
 CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
@@ -140,10 +217,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 
@@ -155,6 +228,82 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+
+#
 # Device Drivers
 #
 
@@ -166,6 +315,12 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -182,25 +337,14 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=y
 
 #
@@ -211,6 +355,7 @@ CONFIG_ATA_OVER_ETH=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=y
 # CONFIG_SCSI is not set
 
 #
@@ -221,6 +366,7 @@ CONFIG_ATA_OVER_ETH=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -231,77 +377,27 @@ CONFIG_ATA_OVER_ETH=y
 #
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
+# Network device support
 #
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
 
 #
-# QoS and/or fair queueing
+# PHY device support
 #
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
+CONFIG_PHYLIB=y
 
 #
-# Network testing
+# MII PHY device drivers
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
 
 #
 # Ethernet (10 or 100Mbit)
@@ -334,6 +430,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -363,18 +461,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -384,6 +470,16 @@ CONFIG_SERIO_RAW=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -425,10 +521,15 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -439,10 +540,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -462,7 +573,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -476,7 +586,7 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
@@ -492,24 +602,31 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # InfiniBand support
 #
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -530,12 +647,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
 
 #
 # Miscellaneous filesystems
@@ -567,6 +682,7 @@ CONFIG_NFSD=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -575,6 +691,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -595,7 +712,9 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -609,7 +728,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -619,7 +762,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/ocelot_g_defconfig b/arch/mips/configs/ocelot_g_defconfig
index ef5ea50893d1..4c396e1e2f0a 100644
--- a/arch/mips/configs/ocelot_g_defconfig
+++ b/arch/mips/configs/ocelot_g_defconfig
@@ -1,87 +1,75 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:08 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:46 2005
 #
 CONFIG_MIPS=y
-CONFIG_64BIT=y
-CONFIG_64BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-CONFIG_MOMENCO_OCELOT_G=y
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+CONFIG_MOMENCO_OCELOT_G=y
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_IRQ_CPU_RM7K=y
 CONFIG_PCI_MARVELL=y
@@ -94,8 +82,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -111,6 +101,17 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 CONFIG_CPU_RM7000=y
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_RM7000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -118,18 +119,94 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_BOARD_SCACHE=y
 CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -138,10 +215,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -159,6 +232,82 @@ CONFIG_MIPS32_N32=y
 CONFIG_BINFMT_ELF32=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+
+#
 # Device Drivers
 #
 
@@ -167,7 +316,13 @@ CONFIG_BINFMT_ELF32=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
 
 #
 # Memory Technology Devices (MTD)
@@ -186,7 +341,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -197,18 +351,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=y
 
 #
@@ -219,6 +364,7 @@ CONFIG_ATA_OVER_ETH=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=y
 # CONFIG_SCSI is not set
 
 #
@@ -229,6 +375,7 @@ CONFIG_ATA_OVER_ETH=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -241,77 +388,13 @@ CONFIG_ATA_OVER_ETH=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
+# Network device support
 #
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -319,6 +402,20 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -326,6 +423,7 @@ CONFIG_MII=y
 CONFIG_GALILEO_64240_ETH=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -345,12 +443,16 @@ CONFIG_GALILEO_64240_ETH=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -363,6 +465,8 @@ CONFIG_GALILEO_64240_ETH=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=y
 
 #
 # Wan interfaces
@@ -374,6 +478,8 @@ CONFIG_GALILEO_64240_ETH=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -403,19 +509,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -425,6 +518,17 @@ CONFIG_SERIO_RAW=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -445,6 +549,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -471,6 +576,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -481,10 +592,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -504,7 +625,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -514,12 +634,12 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
@@ -538,21 +658,29 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -573,12 +701,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
 
 #
 # Miscellaneous filesystems
@@ -610,6 +736,7 @@ CONFIG_NFSD=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -618,6 +745,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -638,7 +766,9 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -652,7 +782,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -662,7 +816,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig
index 813e3a8b480b..883626afc47d 100644
--- a/arch/mips/configs/pb1100_defconfig
+++ b/arch/mips/configs/pb1100_defconfig
@@ -1,111 +1,77 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:08 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:48 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+CONFIG_MIPS_PB1100=y
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-CONFIG_SOC_AU1X00=y
-# CONFIG_SOC_AU1000 is not set
-CONFIG_SOC_AU1100=y
-# CONFIG_SOC_AU1500 is not set
-# CONFIG_SOC_AU1550 is not set
-# CONFIG_MIPS_PB1000 is not set
-CONFIG_MIPS_PB1100=y
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SOC_AU1100=y
+CONFIG_SOC_AU1X00=y
 CONFIG_SWAP_IO_SPACE=y
 # CONFIG_AU1X00_USB_DEVICE is not set
 CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -113,8 +79,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -130,18 +98,112 @@ CONFIG_CPU_MIPS32=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_64BIT_PHYS_ADDR is not set
+# CONFIG_MIPS_MT is not set
+CONFIG_64BIT_PHYS_ADDR=y
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
@@ -154,11 +216,12 @@ CONFIG_MMU=y
 CONFIG_PCCARD=m
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
 
 #
 # PC-card bridges
 #
-# CONFIG_TCIC is not set
 # CONFIG_PCMCIA_AU1X00 is not set
 
 #
@@ -171,6 +234,107 @@ CONFIG_PCMCIA=m
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -181,15 +345,20 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
 #
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 
@@ -201,6 +370,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -233,9 +403,8 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_PB1100=y
-CONFIG_MTD_PB1500_BOOT=y
-CONFIG_MTD_PB1500_USER=y
+CONFIG_MTD_ALCHEMY=y
+# CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
@@ -259,6 +428,11 @@ CONFIG_MTD_PB1500_USER=y
 # CONFIG_MTD_NAND is not set
 
 #
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
 # Parallel port support
 #
 # CONFIG_PARPORT is not set
@@ -270,26 +444,15 @@ CONFIG_MTD_PB1500_USER=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -300,6 +463,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
 
 #
@@ -310,6 +474,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -320,94 +485,27 @@ CONFIG_ATA_OVER_ETH=m
 #
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
+# Network device support
 #
-# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# PHY device support
 #
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
+CONFIG_PHYLIB=m
 
 #
-# QoS and/or fair queueing
+# MII PHY device drivers
 #
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -415,6 +513,7 @@ CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 # CONFIG_MIPS_AU1X00_ENET is not set
+# CONFIG_SMC91X is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -449,10 +548,13 @@ CONFIG_PPP_ASYNC=m
 # CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 # CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -482,18 +584,6 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -503,6 +593,16 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -515,12 +615,19 @@ CONFIG_HW_CONSOLE=y
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_AU1X00=y
 
 #
 # Non-8250 serial port support
 #
 # CONFIG_SERIAL_AU1X00 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -534,22 +641,30 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
-CONFIG_RTC=y
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
 
 #
 # PCMCIA character devices
 #
 CONFIG_SYNCLINK_CS=m
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -560,10 +675,20 @@ CONFIG_SYNCLINK_CS=m
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -583,7 +708,6 @@ CONFIG_SYNCLINK_CS=m
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -593,11 +717,12 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
@@ -613,7 +738,10 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # InfiniBand support
 #
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
 
 #
 # File systems
@@ -622,6 +750,7 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -640,10 +769,12 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -664,13 +795,10 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -704,6 +832,7 @@ CONFIG_NFSD=m
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -713,6 +842,7 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -772,7 +902,9 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -788,26 +920,27 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
 CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_TEST is not set
 
@@ -819,9 +952,8 @@ CONFIG_CRYPTO_CRC32C=m
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig
index 49e528340a39..f8fbc77f924e 100644
--- a/arch/mips/configs/pb1500_defconfig
+++ b/arch/mips/configs/pb1500_defconfig
@@ -1,118 +1,87 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:09 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:50 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+CONFIG_MIPS_PB1500=y
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-CONFIG_SOC_AU1X00=y
-# CONFIG_SOC_AU1000 is not set
-# CONFIG_SOC_AU1100 is not set
-CONFIG_SOC_AU1500=y
-# CONFIG_SOC_AU1550 is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-CONFIG_MIPS_PB1500=y
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_DMA_COHERENT=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SOC_AU1500=y
+CONFIG_SOC_AU1X00=y
 # CONFIG_AU1X00_USB_DEVICE is not set
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -128,24 +97,117 @@ CONFIG_CPU_MIPS32=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
 CONFIG_64BIT_PHYS_ADDR=y
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -154,6 +216,8 @@ CONFIG_MMU=y
 CONFIG_PCCARD=m
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
 CONFIG_CARDBUS=y
 
 #
@@ -162,7 +226,6 @@ CONFIG_CARDBUS=y
 # CONFIG_YENTA is not set
 CONFIG_PD6729=m
 # CONFIG_I82092 is not set
-# CONFIG_TCIC is not set
 # CONFIG_PCMCIA_AU1X00 is not set
 CONFIG_PCCARD_NONSTATIC=m
 
@@ -177,6 +240,107 @@ CONFIG_PCCARD_NONSTATIC=m
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -187,12 +351,93 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
 #
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_ALCHEMY=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
 
 #
 # Parallel port support
@@ -206,7 +451,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -218,19 +462,9 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -275,6 +509,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_HPT366=y
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
 # CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -292,6 +527,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
 
 #
@@ -302,6 +538,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -314,94 +551,13 @@ CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
+# Network device support
 #
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -409,6 +565,20 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -416,7 +586,9 @@ CONFIG_MII=m
 CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
 
 #
 # Tulip family network device support
@@ -435,12 +607,16 @@ CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -453,6 +629,8 @@ CONFIG_MIPS_AU1X00_ENET=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
 
 #
 # PCMCIA network device support
@@ -480,10 +658,13 @@ CONFIG_PPP_ASYNC=m
 # CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 # CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -513,19 +694,6 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -535,6 +703,17 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 # CONFIG_VT is not set
@@ -545,15 +724,20 @@ CONFIG_SERIO_RAW=m
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_AU1X00=y
 
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_AU1X00=y
-CONFIG_SERIAL_AU1X00_CONSOLE=y
+# CONFIG_SERIAL_AU1X00 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -582,9 +766,17 @@ CONFIG_LEGACY_PTY_COUNT=256
 # PCMCIA character devices
 #
 CONFIG_SYNCLINK_CS=m
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -595,10 +787,20 @@ CONFIG_SYNCLINK_CS=m
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -612,7 +814,6 @@ CONFIG_SYNCLINK_CS=m
 # Graphics support
 #
 # CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -622,12 +823,12 @@ CONFIG_SYNCLINK_CS=m
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
@@ -646,12 +847,17 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -670,10 +876,12 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -694,13 +902,10 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -712,6 +917,8 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set
@@ -732,6 +939,7 @@ CONFIG_NFSD=m
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -741,6 +949,7 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -800,7 +1009,9 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -816,27 +1027,28 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
 CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -847,9 +1059,8 @@ CONFIG_CRYPTO_MICHAEL_MIC=y
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
 CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig
index 8e426776c098..3d694cd68d38 100644
--- a/arch/mips/configs/pb1550_defconfig
+++ b/arch/mips/configs/pb1550_defconfig
@@ -1,118 +1,87 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:09 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:52 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+CONFIG_MIPS_PB1550=y
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-CONFIG_SOC_AU1X00=y
-# CONFIG_SOC_AU1000 is not set
-# CONFIG_SOC_AU1100 is not set
-# CONFIG_SOC_AU1500 is not set
-CONFIG_SOC_AU1550=y
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-CONFIG_MIPS_PB1550=y
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_DMA_COHERENT=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SOC_AU1550=y
+CONFIG_SOC_AU1X00=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -128,24 +97,117 @@ CONFIG_CPU_MIPS32=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
 CONFIG_64BIT_PHYS_ADDR=y
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -154,6 +216,8 @@ CONFIG_MMU=y
 CONFIG_PCCARD=m
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
 CONFIG_CARDBUS=y
 
 #
@@ -162,7 +226,6 @@ CONFIG_CARDBUS=y
 # CONFIG_YENTA is not set
 CONFIG_PD6729=m
 # CONFIG_I82092 is not set
-# CONFIG_TCIC is not set
 # CONFIG_PCMCIA_AU1X00 is not set
 CONFIG_PCCARD_NONSTATIC=m
 
@@ -177,6 +240,107 @@ CONFIG_PCCARD_NONSTATIC=m
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -187,12 +351,93 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
 #
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_ALCHEMY=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
 
 #
 # Parallel port support
@@ -206,7 +451,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -218,19 +462,9 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -275,6 +509,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_HPT366=y
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
 # CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -292,6 +527,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
 
 #
@@ -302,6 +538,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -314,94 +551,13 @@ CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
+# Network device support
 #
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -409,6 +565,20 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -416,7 +586,9 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
 
 #
 # Tulip family network device support
@@ -435,12 +607,16 @@ CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -453,6 +629,8 @@ CONFIG_MIPS_AU1X00_ENET=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
 
 #
 # PCMCIA network device support
@@ -472,10 +650,13 @@ CONFIG_PPP_ASYNC=m
 # CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 # CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -505,19 +686,6 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -527,6 +695,17 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 # CONFIG_VT is not set
@@ -537,15 +716,20 @@ CONFIG_SERIO_RAW=m
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_AU1X00=y
 
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_AU1X00=y
-CONFIG_SERIAL_AU1X00_CONSOLE=y
+# CONFIG_SERIAL_AU1X00 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -574,9 +758,17 @@ CONFIG_LEGACY_PTY_COUNT=256
 # PCMCIA character devices
 #
 CONFIG_SYNCLINK_CS=m
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -587,10 +779,20 @@ CONFIG_SYNCLINK_CS=m
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -604,7 +806,6 @@ CONFIG_SYNCLINK_CS=m
 # Graphics support
 #
 # CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -614,12 +815,12 @@ CONFIG_SYNCLINK_CS=m
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
@@ -638,12 +839,17 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -662,10 +868,12 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -686,13 +894,10 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -704,6 +909,8 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set
@@ -724,6 +931,7 @@ CONFIG_NFSD=m
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -733,6 +941,7 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -792,7 +1001,9 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -808,26 +1019,27 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
 CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_TEST is not set
 
@@ -839,9 +1051,8 @@ CONFIG_CRYPTO_CRC32C=m
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig
new file mode 100644
index 000000000000..fba624a792a9
--- /dev/null
+++ b/arch/mips/configs/pnx8550-jbs_defconfig
@@ -0,0 +1,1117 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:54 2005
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+CONFIG_PNX8550_JBS=y
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_PNX8550=y
+CONFIG_SOC_PNX8550=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
+# CONFIG_64BIT_PHYS_ADDR is not set
+# CONFIG_CPU_ADVANCED is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+# CONFIG_PCI_LEGACY_PROC is not set
+# CONFIG_PCI_DEBUG is not set
+CONFIG_MMU=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=m
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+CONFIG_BLK_DEV_IDESCSI=y
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+CONFIG_BLK_DEV_OFFBOARD=y
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_IDEDMA_PCI_AUTO is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+CONFIG_BLK_DEV_HPT366=y
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+CONFIG_ISCSI_TCP=m
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+CONFIG_8139TOO=y
+# CONFIG_8139TOO_PIO is not set
+CONFIG_8139TOO_TUNE_TWISTER=y
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_LAN_SAA9730 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_IP3106 is not set
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_TCP is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_DEBUG_SLAB=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_KGDB is not set
+# CONFIG_RUNTIME_DEBUG is not set
+# CONFIG_MIPS_UNCACHED is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
diff --git a/arch/mips/configs/pnx8550-v2pci_defconfig b/arch/mips/configs/pnx8550-v2pci_defconfig
new file mode 100644
index 000000000000..d9a0d2fdba4f
--- /dev/null
+++ b/arch/mips/configs/pnx8550-v2pci_defconfig
@@ -0,0 +1,1302 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:06:58 2005
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+CONFIG_PNX8550_V2PCI=y
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_PNX8550=y
+CONFIG_SOC_PNX8550=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
+# CONFIG_64BIT_PHYS_ADDR is not set
+CONFIG_CPU_ADVANCED=y
+CONFIG_CPU_HAS_LLSC=y
+# CONFIG_CPU_HAS_LLDSCD is not set
+# CONFIG_CPU_HAS_WB is not set
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+# CONFIG_PCI_LEGACY_PROC is not set
+CONFIG_MMU=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+CONFIG_BLK_DEV_CMD64X=y
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=m
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+CONFIG_ISCSI_TCP=m
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+CONFIG_SCSI_AIC7XXX=m
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+CONFIG_NATSEMI=y
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+CONFIG_8139TOO=y
+# CONFIG_8139TOO_PIO is not set
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_LAN_SAA9730 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+# CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+# CONFIG_VT_CONSOLE is not set
+CONFIG_HW_CONSOLE=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_IP3106 is not set
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=m
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=m
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON_OLD is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_SMIVGX is not set
+# CONFIG_FB_CYBLA is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_XFS_FS=m
+CONFIG_XFS_EXPORT=y
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_TCP is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE=""
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/qemu_defconfig b/arch/mips/configs/qemu_defconfig
index b6568e421b99..dee44606164c 100644
--- a/arch/mips/configs/qemu_defconfig
+++ b/arch/mips/configs/qemu_defconfig
@@ -1,53 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc6
-# Mon Aug  8 11:49:54 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:07:00 2005
 #
 CONFIG_MIPS=y
 
 #
-# Code maturity level options
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-# CONFIG_BUG is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SHMEM is not set
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
 # Machine selection
 #
 # CONFIG_MIPS_MTX1 is not set
@@ -74,6 +32,7 @@ CONFIG_BASE_SMALL=1
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
@@ -91,6 +50,7 @@ CONFIG_QEMU=y
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SIBYTE_SWARM is not set
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_RHONE is not set
@@ -105,7 +65,6 @@ CONFIG_QEMU=y
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_COHERENT=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_I8259=y
@@ -119,7 +78,7 @@ CONFIG_HAVE_STD_PC_SERIAL_PORT=y
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
 # CONFIG_CPU_MIPS64_R2 is not set
@@ -127,7 +86,7 @@ CONFIG_HAVE_STD_PC_SERIAL_PORT=y
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
 # CONFIG_CPU_R4300 is not set
-CONFIG_CPU_R4X00=y
+# CONFIG_CPU_R4X00 is not set
 # CONFIG_CPU_TX49XX is not set
 # CONFIG_CPU_R5000 is not set
 # CONFIG_CPU_R5432 is not set
@@ -138,9 +97,11 @@ CONFIG_CPU_R4X00=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
 
 #
 # Kernel type
@@ -151,20 +112,86 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
 # CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
+# Code maturity level options
+#
+# CONFIG_EXPERIMENTAL is not set
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_SYSCTL is not set
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+# CONFIG_BUG is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_SHMEM is not set
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=1
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_ISA=y
@@ -214,8 +241,8 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
@@ -226,15 +253,24 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
 #
+# CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
 
 #
 # Device Drivers
@@ -248,6 +284,12 @@ CONFIG_STANDALONE=y
 # CONFIG_FW_LOADER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -265,22 +307,12 @@ CONFIG_STANDALONE=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -291,6 +323,7 @@ CONFIG_IOSCHED_NOOP=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=y
 # CONFIG_SCSI is not set
 
 #
@@ -331,6 +364,20 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -351,7 +398,6 @@ CONFIG_NET_ISA=y
 # CONFIG_ETH16I is not set
 CONFIG_NE2000=y
 # CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -470,7 +516,6 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # I2C support
 #
 # CONFIG_I2C is not set
-# CONFIG_I2C_SENSOR is not set
 
 #
 # Dallas's 1-wire bus
@@ -481,12 +526,17 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # Hardware Monitoring support
 #
 # CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
 
 #
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -520,6 +570,10 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
 #
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
@@ -532,7 +586,6 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # InfiniBand support
 #
-# CONFIG_INFINIBAND is not set
 
 #
 # SN Devices
@@ -547,10 +600,6 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -559,6 +608,7 @@ CONFIG_INOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -576,11 +626,13 @@ CONFIG_INOTIFY=y
 #
 # Pseudo filesystems
 #
-# CONFIG_PROC_FS is not set
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
 # CONFIG_SYSFS is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
 
 #
 # Miscellaneous filesystems
@@ -634,12 +686,35 @@ CONFIG_CMDLINE="console=ttyS0 debug ip=172.20.0.2:172.20.0.1::255.255.0.0"
 # Security options
 #
 # CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
 
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -649,7 +724,8 @@ CONFIG_CMDLINE="console=ttyS0 debug ip=172.20.0.2:172.20.0.1::255.255.0.0"
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=y
 CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig
new file mode 100644
index 000000000000..1cc145023584
--- /dev/null
+++ b/arch/mips/configs/rbhma4500_defconfig
@@ -0,0 +1,1284 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:07:03 2005
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+CONFIG_TOSHIBA_RBTX4938=y
+
+#
+# Multiplex Pin Select
+#
+CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61=y
+# CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND is not set
+# CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_I8259=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_HAVE_STD_PC_SERIAL_PORT=y
+CONFIG_TOSHIBA_BOARDS=y
+
+#
+# CPU selection
+#
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+CONFIG_CPU_TX49XX=y
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_TX49XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
+CONFIG_CPU_ADVANCED=y
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_LLDSCD=y
+CONFIG_CPU_HAS_WB=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+# CONFIG_KOBJECT_UEVENT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+# CONFIG_PCI_LEGACY_PROC is not set
+CONFIG_ISA=y
+CONFIG_MMU=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_IDEDMA_PCI_AUTO is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+# CONFIG_IDE_CHIPSETS is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+# CONFIG_SCSI is not set
+
+#
+# Old CD-ROM drivers (not SCSI, not IDE)
+#
+# CONFIG_CD_NO_IDESCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_ISA=y
+# CONFIG_E2100 is not set
+# CONFIG_EWRK3 is not set
+# CONFIG_EEXPRESS is not set
+# CONFIG_EEXPRESS_PRO is not set
+# CONFIG_HPLAN_PLUS is not set
+# CONFIG_HPLAN is not set
+# CONFIG_LP486E is not set
+# CONFIG_ETH16I is not set
+CONFIG_NE2000=y
+# CONFIG_SEEQ8005 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_LAN_SAA9730 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_ARLAN is not set
+# CONFIG_WAVELAN is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
+#
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+# CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_HAS_TXX9_SERIAL=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON_OLD is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+CONFIG_FB_ATY=y
+CONFIG_FB_ATY_CT=y
+# CONFIG_FB_ATY_GENERIC_LCD is not set
+# CONFIG_FB_ATY_XL_INIT is not set
+# CONFIG_FB_ATY_GX is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_SMIVGX is not set
+# CONFIG_FB_CYBLA is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+CONFIG_USB_YEALINK=m
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_ZD1201 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_XFS_FS=m
+CONFIG_XFS_EXPORT=y
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_TCP is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE=""
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig
index 17d4fce6c4c6..30975b305ae5 100644
--- a/arch/mips/configs/rm200_defconfig
+++ b/arch/mips/configs/rm200_defconfig
@@ -1,100 +1,80 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:09 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:07:06 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 CONFIG_SNI_RM200_PCI=y
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_ARC=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_I8259=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_ARC32=y
 CONFIG_BOOT_ELF32=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -106,8 +86,10 @@ CONFIG_ARC_PROMLIB=y
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -123,137 +105,100 @@ CONFIG_CPU_R4X00=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R4X00=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
 
 #
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_NAMES is not set
-CONFIG_ISA=y
-# CONFIG_EISA is not set
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PROBE=y
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_PC_CML1=m
-CONFIG_PARPORT_SERIAL=m
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_OTHER is not set
-CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
+# Code maturity level options
 #
-# CONFIG_PNP is not set
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
-# Block devices
+# General setup
 #
-CONFIG_BLK_DEV_FD=m
-# CONFIG_BLK_DEV_XD is not set
-CONFIG_PARIDE=m
-CONFIG_PARIDE_PARPORT=m
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
-# Parallel IDE high-level drivers
+# Loadable module support
 #
-CONFIG_PARIDE_PD=m
-CONFIG_PARIDE_PCD=m
-CONFIG_PARIDE_PF=m
-CONFIG_PARIDE_PT=m
-CONFIG_PARIDE_PG=m
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
 
 #
-# Parallel IDE protocol modules
+# Block layer
 #
-CONFIG_PARIDE_ATEN=m
-CONFIG_PARIDE_BPCK=m
-CONFIG_PARIDE_BPCK6=m
-CONFIG_PARIDE_COMM=m
-CONFIG_PARIDE_DSTR=m
-CONFIG_PARIDE_FIT2=m
-CONFIG_PARIDE_FIT3=m
-CONFIG_PARIDE_EPAT=m
-# CONFIG_PARIDE_EPATC8 is not set
-CONFIG_PARIDE_EPIA=m
-CONFIG_PARIDE_FRIQ=m
-CONFIG_PARIDE_FRPW=m
-CONFIG_PARIDE_KBIC=m
-CONFIG_PARIDE_KTTI=m
-CONFIG_PARIDE_ON20=m
-CONFIG_PARIDE_ON26=m
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_SX8=m
-CONFIG_BLK_DEV_UB=m
-CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
 
 #
 # IO Schedulers
@@ -262,146 +207,42 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
 
 #
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_IN2000 is not set
-CONFIG_MEGARAID_NEWGEN=y
-CONFIG_MEGARAID_MM=m
-CONFIG_MEGARAID_MAILBOX=m
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-CONFIG_SCSI_PPA=m
-CONFIG_SCSI_IMM=m
-# CONFIG_SCSI_IZIP_EPP16 is not set
-# CONFIG_SCSI_IZIP_SLOW_CTR is not set
-# CONFIG_SCSI_NCR53C406A is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
-# CONFIG_MD_RAID6 is not set
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_CRYPT is not set
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
+CONFIG_HW_HAS_EISA=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_LEGACY_PROC=y
+CONFIG_ISA=y
+# CONFIG_EISA is not set
+CONFIG_MMU=y
 
 #
-# Fusion MPT device support
+# PCCARD (PCMCIA/CardBus) support
 #
-# CONFIG_FUSION is not set
+# CONFIG_PCCARD is not set
 
 #
-# IEEE 1394 (FireWire) support
+# PCI Hotplug Support
 #
-# CONFIG_IEEE1394 is not set
+# CONFIG_HOTPLUG_PCI is not set
 
 #
-# I2O device support
+# Executable file formats
 #
-# CONFIG_I2O is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+CONFIG_TRAD_SIGNALS=y
 
 #
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -410,12 +251,14 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=m
 CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=m
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
 CONFIG_NET_KEY=m
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 # CONFIG_IP_PNP is not set
 CONFIG_NET_IPIP=m
 CONFIG_NET_IPGRE=m
@@ -429,8 +272,10 @@ CONFIG_IP_PIMSM_V2=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
 
 #
 # IP: Virtual Server Configuration
@@ -448,16 +293,27 @@ CONFIG_NETFILTER=y
 CONFIG_BRIDGE_NETFILTER=y
 
 #
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
 # IP: Netfilter Configuration
 #
 CONFIG_IP_NF_CONNTRACK=m
 # CONFIG_IP_NF_CT_ACCT is not set
 CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
+CONFIG_IP_NF_CONNTRACK_NETLINK=m
 CONFIG_IP_NF_CT_PROTO_SCTP=m
 CONFIG_IP_NF_FTP=m
 CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_PPTP=m
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_LIMIT=m
@@ -482,14 +338,17 @@ CONFIG_IP_NF_MATCH_PHYSDEV=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_REALM=m
 CONFIG_IP_NF_MATCH_SCTP=m
+CONFIG_IP_NF_MATCH_DCCP=m
 CONFIG_IP_NF_MATCH_COMMENT=m
 CONFIG_IP_NF_MATCH_CONNMARK=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -501,12 +360,14 @@ CONFIG_IP_NF_NAT_IRC=m
 CONFIG_IP_NF_NAT_FTP=m
 CONFIG_IP_NF_NAT_TFTP=m
 CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_NAT_PPTP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_DSCP=m
 CONFIG_IP_NF_TARGET_MARK=m
 CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_TARGET_CONNMARK=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
@@ -516,7 +377,7 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
 #
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
@@ -536,8 +397,11 @@ CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_PHYSDEV=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_NFQUEUE=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 
 #
@@ -567,9 +431,12 @@ CONFIG_BRIDGE_EBT_MARK_T=m
 CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
-# CONFIG_BRIDGE_EBT_ULOG is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
+CONFIG_BRIDGE_EBT_ULOG=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
 
 #
 # SCTP Configuration (EXPERIMENTAL)
@@ -596,6 +463,10 @@ CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_CLK_JIFFIES=y
 # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
 # CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
@@ -608,28 +479,31 @@ CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
+
+#
+# Classification
+#
 CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
 CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
 CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
 # CONFIG_CLS_U32_PERF is not set
-# CONFIG_NET_CLS_IND is not set
 # CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_POLICE=y
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_ESTIMATOR=y
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
 CONFIG_HAMRADIO=y
 
 #
@@ -646,8 +520,6 @@ CONFIG_ROSE=m
 CONFIG_MKISS=m
 CONFIG_6PACK=m
 CONFIG_BPQETHER=m
-# CONFIG_DMASCC is not set
-# CONFIG_SCC is not set
 # CONFIG_BAYCOM_SER_FDX is not set
 # CONFIG_BAYCOM_SER_HDX is not set
 # CONFIG_BAYCOM_PAR is not set
@@ -655,12 +527,251 @@ CONFIG_BPQETHER=m
 # CONFIG_YAM is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_SERIAL=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_NOT_PC=y
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_1284=y
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+CONFIG_BLK_DEV_FD=m
+CONFIG_PARIDE=m
+CONFIG_PARIDE_PARPORT=m
+
+#
+# Parallel IDE high-level drivers
+#
+CONFIG_PARIDE_PD=m
+CONFIG_PARIDE_PCD=m
+CONFIG_PARIDE_PF=m
+CONFIG_PARIDE_PT=m
+CONFIG_PARIDE_PG=m
+
+#
+# Parallel IDE protocol modules
+#
+CONFIG_PARIDE_ATEN=m
+CONFIG_PARIDE_BPCK=m
+CONFIG_PARIDE_BPCK6=m
+CONFIG_PARIDE_COMM=m
+CONFIG_PARIDE_DSTR=m
+CONFIG_PARIDE_FIT2=m
+CONFIG_PARIDE_FIT3=m
+CONFIG_PARIDE_EPAT=m
+# CONFIG_PARIDE_EPATC8 is not set
+CONFIG_PARIDE_EPIA=m
+CONFIG_PARIDE_FRIQ=m
+CONFIG_PARIDE_FRPW=m
+CONFIG_PARIDE_KBIC=m
+CONFIG_PARIDE_KTTI=m
+CONFIG_PARIDE_ON20=m
+CONFIG_PARIDE_ON26=m
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_SX8=m
+CONFIG_BLK_DEV_UB=m
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+
+#
+# SCSI low-level drivers
+#
+CONFIG_ISCSI_TCP=m
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_IN2000 is not set
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=m
+CONFIG_MEGARAID_MAILBOX=m
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+CONFIG_SCSI_PPA=m
+CONFIG_SCSI_IMM=m
+# CONFIG_SCSI_IZIP_EPP16 is not set
+# CONFIG_SCSI_IZIP_SLOW_CTR is not set
+# CONFIG_SCSI_NCR53C406A is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_PSI240I is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Old CD-ROM drivers (not SCSI, not IDE)
+#
+# CONFIG_CD_NO_IDESCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID5=m
+# CONFIG_MD_RAID6 is not set
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_CRYPT is not set
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 CONFIG_EQUALIZER=m
 CONFIG_TUN=m
-CONFIG_ETHERTAP=m
 
 #
 # ARCnet devices
@@ -668,14 +779,28 @@ CONFIG_ETHERTAP=m
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_NET_VENDOR_RACAL is not set
 
@@ -696,7 +821,6 @@ CONFIG_NET_ISA=y
 # CONFIG_LP486E is not set
 # CONFIG_ETH16I is not set
 CONFIG_NE2000=m
-# CONFIG_ZNET is not set
 # CONFIG_SEEQ8005 is not set
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=y
@@ -733,13 +857,17 @@ CONFIG_EEPRO100=m
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 CONFIG_VIA_VELOCITY=m
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -752,6 +880,8 @@ CONFIG_VIA_VELOCITY=m
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -765,6 +895,8 @@ CONFIG_PLIP=m
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -794,20 +926,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-CONFIG_SERIO_PARKBD=m
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
@@ -828,6 +946,18 @@ CONFIG_MOUSE_PS2=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_PARKBD=m
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -844,13 +974,13 @@ CONFIG_SERIAL_8250_EXTENDED=y
 # CONFIG_SERIAL_8250_MANY_PORTS is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_MULTIPORT=y
 CONFIG_SERIAL_8250_RSA=y
 
 #
 # Non-8250 serial port support
 #
 CONFIG_SERIAL_CORE=m
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -881,6 +1011,12 @@ CONFIG_RTC=m
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -891,15 +1027,26 @@ CONFIG_RTC=m
 CONFIG_W1=m
 CONFIG_W1_MATROX=m
 CONFIG_W1_DS9490=m
-CONFIG_W1_DS9490_BRIDGE=m
+# CONFIG_W1_DS9490_BRIDGE is not set
 CONFIG_W1_THERM=m
 CONFIG_W1_SMEM=m
+# CONFIG_W1_DS2433 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
 
 #
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -920,7 +1067,6 @@ CONFIG_W1_SMEM=m
 CONFIG_VGA_CONSOLE=y
 # CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -930,6 +1076,8 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
 
@@ -940,8 +1088,6 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
 
 #
 # USB Host Controller Drivers
@@ -949,27 +1095,32 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=m
 # CONFIG_USB_SL811_HCD is not set
 
 #
 # USB Device Class drivers
 #
-CONFIG_USB_BLUETOOTH_TTY=m
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_RW_DETECT is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
 CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_HP8200e=y
+# CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
@@ -992,12 +1143,17 @@ CONFIG_USB_KBD=m
 CONFIG_USB_MOUSE=m
 CONFIG_USB_AIPTEK=m
 CONFIG_USB_WACOM=m
+# CONFIG_USB_ACECAD is not set
 CONFIG_USB_KBTAB=m
 CONFIG_USB_POWERMATE=m
 # CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
 CONFIG_USB_EGALAX=m
+CONFIG_USB_YEALINK=m
 CONFIG_USB_XPAD=m
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
 
 #
 # USB Imaging devices
@@ -1022,30 +1178,15 @@ CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
 CONFIG_USB_USBNET=m
-
-#
-# USB Host-to-Host Cables
-#
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_GENESYS=y
-CONFIG_USB_NET1080=y
-CONFIG_USB_PL2301=y
-CONFIG_USB_KC2190=y
-
-#
-# Intelligent USB Devices/Gadgets
-#
-CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_ZAURUS=y
-CONFIG_USB_CDCETHER=y
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_AX8817X=y
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1057,9 +1198,12 @@ CONFIG_USB_USS720=m
 #
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRPRIME=m
+CONFIG_USB_SERIAL_ANYDATA=m
 CONFIG_USB_SERIAL_BELKIN=m
 CONFIG_USB_SERIAL_WHITEHEAT=m
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP2101 is not set
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
@@ -1088,6 +1232,7 @@ CONFIG_USB_SERIAL_KLSI=m
 CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
 CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_HP4X=m
 CONFIG_USB_SERIAL_SAFE=m
 CONFIG_USB_SERIAL_SAFE_PADDED=y
 # CONFIG_USB_SERIAL_TI is not set
@@ -1110,10 +1255,13 @@ CONFIG_USB_CYTHERM=m
 CONFIG_USB_PHIDGETKIT=m
 CONFIG_USB_PHIDGETSERVO=m
 # CONFIG_USB_IDMOUSE is not set
+CONFIG_USB_SISUSBVGA=m
+# CONFIG_USB_SISUSBVGA_CON is not set
+CONFIG_USB_LD=m
 CONFIG_USB_TEST=m
 
 #
-# USB ATM/DSL drivers
+# USB DSL modem support
 #
 
 #
@@ -1132,10 +1280,15 @@ CONFIG_USB_TEST=m
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=m
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -1152,17 +1305,20 @@ CONFIG_REISERFS_FS_SECURITY=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
+CONFIG_XFS_EXPORT=y
 CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 # CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
 CONFIG_MINIX_FS=m
 CONFIG_ROMFS_FS=m
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_QUOTACTL=y
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -1192,12 +1348,10 @@ CONFIG_NTFS_FS=m
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -1224,15 +1378,18 @@ CONFIG_UFS_FS=m
 #
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
 CONFIG_RPCSEC_GSS_KRB5=m
@@ -1256,6 +1413,7 @@ CONFIG_CODA_FS=m
 CONFIG_CODA_FS_OLD_API=y
 CONFIG_AFS_FS=m
 CONFIG_RXRPC=m
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1329,7 +1487,9 @@ CONFIG_NLS_UTF8=m
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -1352,6 +1512,7 @@ CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
@@ -1360,13 +1521,13 @@ CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
 CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -1376,9 +1537,12 @@ CONFIG_CRYPTO_TEST=m
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
 CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
+CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig
index 1dc935f37582..63f1be18e9bf 100644
--- a/arch/mips/configs/sb1250-swarm_defconfig
+++ b/arch/mips/configs/sb1250-swarm_defconfig
@@ -1,88 +1,56 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:10 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:07:09 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_LOCK_KERNEL=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-CONFIG_SIBYTE_SB1xxx_SOC=y
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
 CONFIG_SIBYTE_SWARM=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_RHONE is not set
@@ -91,9 +59,12 @@ CONFIG_SIBYTE_SWARM=y
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_UNKNOWN is not set
-CONFIG_SIBYTE_BOARD=y
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_SIBYTE_SB1250=y
+CONFIG_SIBYTE_SB1xxx_SOC=y
 CONFIG_CPU_SB1_PASS_1=y
 # CONFIG_CPU_SB1_PASS_2_1250 is not set
 # CONFIG_CPU_SB1_PASS_2_2 is not set
@@ -102,18 +73,20 @@ CONFIG_CPU_SB1_PASS_1=y
 # CONFIG_CPU_SB1_PASS_3 is not set
 CONFIG_SIBYTE_HAS_LDT=y
 # CONFIG_SIMULATION is not set
+# CONFIG_SB1_CEX_ALWAYS_FATAL is not set
+# CONFIG_SB1_CERR_STALL is not set
 CONFIG_SIBYTE_CFE=y
 # CONFIG_SIBYTE_CFE_CONSOLE is not set
 # CONFIG_SIBYTE_BUS_WATCHER is not set
 # CONFIG_SIBYTE_SB1250_PROF is not set
 # CONFIG_SIBYTE_TBPROF is not set
-# CONFIG_SNI_RM200_PCI is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_COHERENT=y
+CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_SWAP_IO_SPACE=y
 CONFIG_BOOT_ELF32=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -121,8 +94,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -138,22 +113,117 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 CONFIG_CPU_SB1=y
+CONFIG_SYS_HAS_CPU_SB1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 # CONFIG_SIBYTE_DMA_PAGEOPS is not set
 CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
 CONFIG_SB1_PASS_1_WORKAROUNDS=y
-# CONFIG_64BIT_PHYS_ADDR is not set
-# CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
-# CONFIG_HIGHMEM is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_BKL=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_CPUSETS=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -161,7 +231,6 @@ CONFIG_NR_CPUS=2
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -170,10 +239,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -183,7 +248,89 @@ CONFIG_MMU=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
+# CONFIG_BUILD_ELF64 is not set
+CONFIG_MIPS32_COMPAT=y
+CONFIG_COMPAT=y
+CONFIG_MIPS32_O32=y
+# CONFIG_MIPS32_N32 is not set
+CONFIG_BINFMT_ELF32=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -194,7 +341,12 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
@@ -213,7 +365,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -226,19 +377,9 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=9220
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -263,7 +404,7 @@ CONFIG_BLK_DEV_IDEFLOPPY=y
 #
 CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_IDEPCI is not set
-CONFIG_BLK_DEV_IDE_SWARM=y
+# CONFIG_BLK_DEV_IDE_SWARM is not set
 # CONFIG_IDE_ARM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
 # CONFIG_IDEDMA_AUTO is not set
@@ -272,6 +413,7 @@ CONFIG_BLK_DEV_IDE_SWARM=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
 
 #
@@ -282,6 +424,7 @@ CONFIG_BLK_DEV_IDE_SWARM=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -294,78 +437,13 @@ CONFIG_BLK_DEV_IDE_SWARM=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
+# Network device support
 #
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -373,12 +451,27 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -399,12 +492,16 @@ CONFIG_MII=y
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
 CONFIG_NET_SB1250_MAC=y
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -417,6 +514,8 @@ CONFIG_NET_SB1250_MAC=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -428,6 +527,8 @@ CONFIG_NET_SB1250_MAC=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -445,25 +546,15 @@ CONFIG_NET_SB1250_MAC=y
 # CONFIG_INPUT is not set
 
 #
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
+# Hardware I/O ports
 #
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
 CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
 # CONFIG_SERIO_PCIPS2 is not set
 # CONFIG_SERIO_LIBPS2 is not set
 CONFIG_SERIO_RAW=m
-
-#
-# Input Device Drivers
-#
+# CONFIG_GAMEPORT is not set
 
 #
 # Character devices
@@ -472,11 +563,13 @@ CONFIG_SERIO_RAW=m
 CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_ROCKETPORT is not set
 # CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
-# CONFIG_SYNCLINK is not set
 # CONFIG_SYNCLINKMP is not set
 # CONFIG_N_HDLC is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
 # CONFIG_STALDRV is not set
 CONFIG_SIBYTE_SB1250_DUART=y
 CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y
@@ -489,6 +582,7 @@ CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -515,6 +609,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -525,10 +625,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -542,7 +652,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Graphics support
 #
 # CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -552,12 +661,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
@@ -576,12 +685,17 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 CONFIG_FS_MBCACHE=y
@@ -591,10 +705,12 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -615,11 +731,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -643,13 +758,14 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -658,6 +774,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -678,7 +795,9 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=15
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 # CONFIG_SB1XXX_CORELIS is not set
@@ -695,27 +814,28 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
 CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -726,9 +846,8 @@ CONFIG_CRYPTO_MICHAEL_MIC=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=m
 CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/sead_defconfig b/arch/mips/configs/sead_defconfig
index dd07e866b128..41dd70824976 100644
--- a/arch/mips/configs/sead_defconfig
+++ b/arch/mips/configs/sead_defconfig
@@ -1,87 +1,76 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:10 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:07:10 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 CONFIG_MIPS_SEAD=y
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_MIPS_BOARDS_GEN=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -89,8 +78,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -106,18 +97,106 @@ CONFIG_CPU_MIPS32=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_CPU_MIPS64_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_HOTPLUG is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_MMU=y
@@ -128,10 +207,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 
@@ -143,6 +218,11 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+# CONFIG_NET is not set
+
+#
 # Device Drivers
 #
 
@@ -154,6 +234,10 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -170,7 +254,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
@@ -178,19 +261,7 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=18432
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=y
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
+# CONFIG_CDROM_PKTCDVD is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -200,6 +271,7 @@ CONFIG_IOSCHED_CFQ=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=y
 # CONFIG_SCSI is not set
 
 #
@@ -210,6 +282,7 @@ CONFIG_IOSCHED_CFQ=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -220,9 +293,8 @@ CONFIG_IOSCHED_CFQ=y
 #
 
 #
-# Networking support
+# Network device support
 #
-# CONFIG_NET is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
 
@@ -238,47 +310,18 @@ CONFIG_IOSCHED_CFQ=y
 #
 # Input device support
 #
-CONFIG_INPUT=y
+# CONFIG_INPUT is not set
 
 #
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
+# Hardware I/O ports
 #
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
 
 #
 # Character devices
 #
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
+# CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -294,7 +337,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
+CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 
@@ -315,10 +358,15 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -329,10 +377,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -347,13 +405,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_FB is not set
 
 #
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
 # Sound
 #
 # CONFIG_SOUND is not set
@@ -365,7 +416,7 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
@@ -381,28 +432,31 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # InfiniBand support
 #
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
-CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -423,10 +477,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
 
 #
 # Miscellaneous filesystems
@@ -448,8 +502,18 @@ CONFIG_RAMFS=y
 #
 # Partition Types
 #
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
 
 #
 # Native Language Support
@@ -464,15 +528,16 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
 #
 # Security options
 #
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
+# CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 
 #
@@ -488,7 +553,6 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=y
 # CONFIG_CRC32 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig
index c9d3f83caf0f..83969466ecf6 100644
--- a/arch/mips/configs/tb0226_defconfig
+++ b/arch/mips/configs/tb0226_defconfig
@@ -1,110 +1,94 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:12 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:07:12 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-CONFIG_MACH_VR41XX=y
-# CONFIG_NEC_CMBVR4133 is not set
-# CONFIG_CASIO_E55 is not set
-# CONFIG_IBM_WORKPAD is not set
-CONFIG_TANBAC_TB0226=y
-# CONFIG_TANBAC_TB0229 is not set
-# CONFIG_VICTOR_MPC30X is not set
-# CONFIG_ZAO_CAPCELLA is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+CONFIG_MACH_VR41XX=y
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_NEC_CMBVR4133 is not set
+# CONFIG_CASIO_E55 is not set
+# CONFIG_IBM_WORKPAD is not set
+CONFIG_TANBAC_TB022X=y
+CONFIG_TANBAC_TB0226=y
+# CONFIG_VICTOR_MPC30X is not set
+# CONFIG_ZAO_CAPCELLA is not set
+CONFIG_PCI_VR41XX=y
+# CONFIG_VRC4173 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 CONFIG_CPU_VR41XX=y
@@ -120,19 +104,114 @@ CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_VR41XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
-# CONFIG_PCI is not set
+CONFIG_PCI=y
+# CONFIG_PCI_LEGACY_PROC is not set
 CONFIG_MMU=y
 
 #
@@ -141,12 +220,9 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
+# CONFIG_HOTPLUG_PCI is not set
 
 #
 # Executable file formats
@@ -156,6 +232,90 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
 # Device Drivers
 #
 
@@ -167,6 +327,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -183,59 +348,31 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
+# CONFIG_CDROM_PKTCDVD is not set
 CONFIG_ATA_OVER_ETH=m
 
 #
 # ATA/ATAPI/MFM/RLL support
 #
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-CONFIG_BLK_DEV_IDESCSI=y
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
+# CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -245,15 +382,15 @@ CONFIG_SCSI_PROC_FS=y
 CONFIG_BLK_DEV_SD=y
 # CONFIG_CHR_DEV_ST is not set
 # CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
 CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 
 #
@@ -261,12 +398,45 @@ CONFIG_SCSI_CONSTANTS=y
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
 #
+CONFIG_ISCSI_TCP=m
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 
 #
@@ -277,131 +447,133 @@ CONFIG_SCSI_CONSTANTS=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+# CONFIG_IEEE1394 is not set
 
 #
 # I2O device support
 #
+# CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
+# Network device support
 #
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=m
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# ARCnet devices
 #
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
+# CONFIG_ARCNET is not set
 
 #
-# QoS and/or fair queueing
+# PHY device support
 #
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
+CONFIG_PHYLIB=m
 
 #
-# Network testing
+# MII PHY device drivers
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+CONFIG_EEPRO100=y
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_LAN_SAA9730 is not set
 
 #
 # Ethernet (1000 Mbit)
 #
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
 
 #
 # Token Ring devices
 #
+# CONFIG_TR is not set
 
 #
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW2200 is not set
 
 #
 # Wan interfaces
 #
 # CONFIG_WAN is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
 # CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -421,28 +593,13 @@ CONFIG_INPUT=y
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
 # CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -452,6 +609,12 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -462,16 +625,16 @@ CONFIG_HW_CONSOLE=y
 #
 # Serial drivers
 #
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
 
 #
 # Non-8250 serial port support
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_VR41XX=y
+CONFIG_SERIAL_VR41XX_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -487,16 +650,26 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_WATCHDOG is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
+# CONFIG_RTC_VR41XX is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_TANBAC_TB0219 is not set
 
 #
 # Ftape, the floppy tape device driver
 #
 # CONFIG_DRM is not set
+CONFIG_GPIO_VR41XX=y
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -507,10 +680,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -523,47 +706,149 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Graphics support
 #
-CONFIG_FB=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB is not set
 
 #
 # Console display driver support
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
 
 #
-# Logo configuration
+# Sound
 #
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_SOUND is not set
 
 #
-# Sound
+# USB support
 #
-CONFIG_SOUND=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
 
 #
-# Advanced Linux Sound Architecture
+# Miscellaneous USB options
 #
-# CONFIG_SND is not set
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
 
 #
-# Open Sound System
+# USB Host Controller Drivers
 #
-# CONFIG_SOUND_PRIME is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
 
 #
-# USB support
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
 #
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# USB DSL modem support
 #
 
 #
@@ -582,39 +867,41 @@ CONFIG_SOUND=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 CONFIG_ROMFS_FS=m
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
 #
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
+# CONFIG_ISO9660_FS is not set
 # CONFIG_UDF_FS is not set
 
 #
 # DOS/FAT/NT Filesystems
 #
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
 # CONFIG_NTFS_FS is not set
 
 #
@@ -623,13 +910,10 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -653,16 +937,19 @@ CONFIG_CRAMFS=m
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
 # CONFIG_NFSD_TCP is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -673,6 +960,7 @@ CONFIG_SMB_NLS_REMOTE="cp932"
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -732,9 +1020,11 @@ CONFIG_NLS_ISO8859_1=m
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+CONFIG_CMDLINE="mem=32M console=ttyVR0,115200"
 
 #
 # Security options
@@ -746,7 +1036,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -756,9 +1070,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 CONFIG_CRC_CCITT=m
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
+CONFIG_CRC16=m
+CONFIG_CRC32=m
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/tb0229_defconfig b/arch/mips/configs/tb0229_defconfig
index 2cb669188aa9..ce7b9ed44432 100644
--- a/arch/mips/configs/tb0229_defconfig
+++ b/arch/mips/configs/tb0229_defconfig
@@ -1,113 +1,94 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:12 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:07:15 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-CONFIG_MACH_VR41XX=y
-# CONFIG_NEC_CMBVR4133 is not set
-# CONFIG_CASIO_E55 is not set
-# CONFIG_IBM_WORKPAD is not set
-# CONFIG_TANBAC_TB0226 is not set
-CONFIG_TANBAC_TB0229=y
-CONFIG_TANBAC_TB0219=y
-# CONFIG_VICTOR_MPC30X is not set
-# CONFIG_ZAO_CAPCELLA is not set
-CONFIG_PCI_VR41XX=y
-# CONFIG_VRC4173 is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+CONFIG_MACH_VR41XX=y
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_NEC_CMBVR4133 is not set
+# CONFIG_CASIO_E55 is not set
+# CONFIG_IBM_WORKPAD is not set
+CONFIG_TANBAC_TB022X=y
+# CONFIG_TANBAC_TB0226 is not set
+# CONFIG_VICTOR_MPC30X is not set
+# CONFIG_ZAO_CAPCELLA is not set
+CONFIG_PCI_VR41XX=y
+# CONFIG_VRC4173 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 CONFIG_CPU_VR41XX=y
@@ -123,21 +104,114 @@ CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_VR41XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_LEGACY_PROC is not set
 CONFIG_MMU=y
 
 #
@@ -146,10 +220,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -162,6 +232,91 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_NET_IPGRE_BROADCAST is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
 # Device Drivers
 #
 
@@ -170,7 +325,12 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
@@ -189,7 +349,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -199,23 +358,14 @@ CONFIG_BLK_DEV_LOOP=m
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
 # CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -226,6 +376,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 
 #
@@ -236,6 +387,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -248,83 +400,13 @@ CONFIG_ATA_OVER_ETH=m
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=m
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-# CONFIG_NET_IPGRE_BROADCAST is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
+# Network device support
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -332,12 +414,27 @@ CONFIG_DUMMY=m
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -346,7 +443,7 @@ CONFIG_MII=y
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
+# CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
@@ -358,7 +455,11 @@ CONFIG_EEPRO100=y
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
+CONFIG_8139TOO=y
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -375,14 +476,19 @@ CONFIG_EEPRO100=y
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
+CONFIG_R8169=y
+# CONFIG_R8169_NAPI is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -395,6 +501,8 @@ CONFIG_EEPRO100=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -409,6 +517,7 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
@@ -416,6 +525,8 @@ CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -435,29 +546,13 @@ CONFIG_INPUT=y
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
 # CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -467,6 +562,12 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -477,16 +578,16 @@ CONFIG_HW_CONSOLE=y
 #
 # Serial drivers
 #
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
 
 #
 # Non-8250 serial port support
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_VR41XX=y
+CONFIG_SERIAL_VR41XX_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -502,17 +603,26 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_WATCHDOG is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
+# CONFIG_RTC_VR41XX is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
+CONFIG_TANBAC_TB0219=y
 
 #
 # Ftape, the floppy tape device driver
 #
 # CONFIG_DRM is not set
+CONFIG_GPIO_VR41XX=y
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -523,10 +633,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -546,7 +666,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -556,12 +675,124 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
 #
 
 #
@@ -580,10 +811,15 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -597,18 +833,22 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_SECURITY is not set
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
+# CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=y
-# CONFIG_XFS_RT is not set
+CONFIG_XFS_EXPORT=y
 CONFIG_XFS_QUOTA=y
 # CONFIG_XFS_SECURITY is not set
 CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
 # CONFIG_MINIX_FS is not set
 CONFIG_ROMFS_FS=m
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_QUOTACTL=y
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -635,13 +875,10 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -665,16 +902,19 @@ CONFIG_CRAMFS=m
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -685,6 +925,7 @@ CONFIG_SMB_NLS_REMOTE="cp932"
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -744,9 +985,11 @@ CONFIG_NLS_ISO8859_1=m
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="mem=64M console=ttyS0,38400 ip=bootp root=/dev/nfs"
+CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
 
 #
 # Security options
@@ -758,7 +1001,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -768,9 +1035,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
 CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
+CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig
index 17b9f2f65ba0..95344832d66e 100644
--- a/arch/mips/configs/tb0287_defconfig
+++ b/arch/mips/configs/tb0287_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-mm1
-# Thu Sep  1 22:58:34 2005
+# Linux kernel version: 2.6.14-rc5-mm1
+# Tue Oct 25 00:20:22 2005
 #
 CONFIG_MIPS=y
 
@@ -19,6 +19,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
+CONFIG_SWAP_PREFETCH=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
@@ -55,74 +56,91 @@ CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-CONFIG_MACH_VR41XX=y
-# CONFIG_NEC_CMBVR4133 is not set
-# CONFIG_CASIO_E55 is not set
-# CONFIG_IBM_WORKPAD is not set
-CONFIG_TANBAC_TB022X=y
-# CONFIG_TANBAC_TB0226 is not set
-CONFIG_TANBAC_TB0287=y
-# CONFIG_VICTOR_MPC30X is not set
-# CONFIG_ZAO_CAPCELLA is not set
-CONFIG_PCI_VR41XX=y
-# CONFIG_VRC4173 is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
+CONFIG_MACH_VR41XX=y
+# CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_CASIO_E55 is not set
+# CONFIG_IBM_WORKPAD is not set
+# CONFIG_NEC_CMBVR4133 is not set
+CONFIG_TANBAC_TB022X=y
+# CONFIG_TANBAC_TB0226 is not set
+CONFIG_TANBAC_TB0287=y
+# CONFIG_VICTOR_MPC30X is not set
+# CONFIG_ZAO_CAPCELLA is not set
+CONFIG_PCI_VR41XX=y
+# CONFIG_VRC4173 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 CONFIG_CPU_VR41XX=y
@@ -138,12 +156,25 @@ CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -152,6 +183,9 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
@@ -262,7 +296,6 @@ CONFIG_TCP_CONG_HTCP=m
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
@@ -280,6 +313,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -296,7 +334,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -312,6 +349,7 @@ CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_CDROM_PKTCDVD is not set
 
 #
@@ -321,6 +359,11 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -410,13 +453,20 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI Transport Layers
+#
+# CONFIG_SAS_CLASS is not set
 
 #
 # SCSI low-level drivers
 #
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_ARCMSR is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ARCMSR is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -425,12 +475,10 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
@@ -462,6 +510,7 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -529,6 +578,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -572,6 +622,7 @@ CONFIG_R8169=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Wan interfaces
@@ -682,6 +733,7 @@ CONFIG_GPIO_VR41XX=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -770,12 +822,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_BLUETOOTH_TTY is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -891,6 +946,11 @@ CONFIG_USB_MON=y
 #
 
 #
+# EDAC - error detection and reporting (RAS)
+#
+# CONFIG_EDAC is not set
+
+#
 # Distributed Lock Manager
 #
 # CONFIG_DLM is not set
@@ -901,20 +961,22 @@ CONFIG_USB_MON=y
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
 # CONFIG_REISER4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=y
-# CONFIG_XFS_RT is not set
 CONFIG_XFS_QUOTA=y
 # CONFIG_XFS_SECURITY is not set
 CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 CONFIG_ROMFS_FS=m
@@ -948,8 +1010,8 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
 # CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1004,6 +1066,11 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 
 #
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
@@ -1036,6 +1103,3 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ISA_DMA_API=y
diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig
index 16e07fca446f..02b2551023d4 100644
--- a/arch/mips/configs/workpad_defconfig
+++ b/arch/mips/configs/workpad_defconfig
@@ -1,111 +1,91 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:12 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:07:17 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-CONFIG_MACH_VR41XX=y
-# CONFIG_NEC_CMBVR4133 is not set
-# CONFIG_CASIO_E55 is not set
-CONFIG_IBM_WORKPAD=y
-# CONFIG_TANBAC_TB0226 is not set
-# CONFIG_TANBAC_TB0229 is not set
-# CONFIG_VICTOR_MPC30X is not set
-# CONFIG_ZAO_CAPCELLA is not set
-CONFIG_VRC4171=y
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+CONFIG_MACH_VR41XX=y
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_NEC_CMBVR4133 is not set
+# CONFIG_CASIO_E55 is not set
+CONFIG_IBM_WORKPAD=y
+# CONFIG_TANBAC_TB022X is not set
+# CONFIG_VICTOR_MPC30X is not set
+# CONFIG_ZAO_CAPCELLA is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 CONFIG_CPU_VR41XX=y
@@ -121,15 +101,109 @@ CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_VR41XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_ISA=y
@@ -138,11 +212,17 @@ CONFIG_MMU=y
 #
 # PCCARD (PCMCIA/CardBus) support
 #
-# CONFIG_PCCARD is not set
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
 
 #
 # PC-card bridges
 #
+# CONFIG_I82365 is not set
+# CONFIG_TCIC is not set
 CONFIG_PCMCIA_PROBE=y
 
 #
@@ -157,6 +237,81 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
 # Device Drivers
 #
 
@@ -165,7 +320,12 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
@@ -185,26 +345,12 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
+# CONFIG_CDROM_PKTCDVD is not set
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -219,6 +365,7 @@ CONFIG_BLK_DEV_IDE=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=m
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
@@ -237,6 +384,7 @@ CONFIG_IDE_GENERIC=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 
 #
@@ -252,6 +400,7 @@ CONFIG_IDE_GENERIC=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -262,76 +411,13 @@ CONFIG_IDE_GENERIC=y
 #
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
+# Network device support
 #
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -339,12 +425,25 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=m
 # CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_NET_VENDOR_RACAL is not set
 # CONFIG_AT1700 is not set
@@ -352,7 +451,6 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_HP100 is not set
 # CONFIG_NET_ISA is not set
 # CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -373,6 +471,19 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_NET_RADIO is not set
 
 #
+# PCMCIA network device support
+#
+CONFIG_NET_PCMCIA=y
+CONFIG_PCMCIA_3C589=m
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_PCMCIA_AXNET=m
+
+#
 # Wan interfaces
 #
 # CONFIG_WAN is not set
@@ -380,6 +491,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -409,18 +522,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -430,6 +531,16 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -440,16 +551,15 @@ CONFIG_HW_CONSOLE=y
 #
 # Serial drivers
 #
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
 
 #
 # Non-8250 serial port support
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_VR41XX=y
+CONFIG_SERIAL_VR41XX_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -478,16 +588,30 @@ CONFIG_WATCHDOG=y
 # CONFIG_WDT is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
+# CONFIG_RTC_VR41XX is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_GPIO_VR41XX is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -498,10 +622,20 @@ CONFIG_WATCHDOG=y
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -522,7 +656,6 @@ CONFIG_WATCHDOG=y
 # CONFIG_VGA_CONSOLE is not set
 # CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -536,7 +669,7 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
@@ -552,7 +685,10 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # InfiniBand support
 #
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
 
 #
 # File systems
@@ -561,6 +697,7 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 CONFIG_FS_MBCACHE=y
@@ -570,10 +707,12 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -594,12 +733,10 @@ CONFIG_AUTOFS4_FS=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -630,6 +767,7 @@ CONFIG_NFSD=y
 # CONFIG_NFSD_TCP is not set
 CONFIG_LOCKD=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -638,6 +776,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -658,9 +797,11 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+CONFIG_CMDLINE="console=ttyVR0,19200 mem=16M"
 
 #
 # Security options
@@ -672,7 +813,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -682,7 +847,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=m
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig
index 6d2290777ad7..d51d5d16297c 100644
--- a/arch/mips/configs/yosemite_defconfig
+++ b/arch/mips/configs/yosemite_defconfig
@@ -1,89 +1,75 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:13 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:07:19 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
-
-#
-# Code maturity level options
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
-CONFIG_LOCK_KERNEL=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-CONFIG_PMC_YOSEMITE=y
-# CONFIG_HYPERTRANSPORT is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+CONFIG_PMC_YOSEMITE=y
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_HYPERTRANSPORT is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_COHERENT=y
+CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_IRQ_CPU_RM7K=y
 CONFIG_IRQ_CPU_RM9K=y
@@ -93,8 +79,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -110,20 +98,114 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_CPU_RM7000 is not set
 CONFIG_CPU_RM9000=y
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_RM9000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_HIGHMEM=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_BKL=y
+
+#
+# Code maturity level options
+#
+# CONFIG_EXPERIMENTAL is not set
+CONFIG_CLEAN_COMPILE=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -131,7 +213,7 @@ CONFIG_NR_CPUS=2
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 CONFIG_MMU=y
 
 #
@@ -140,10 +222,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 
@@ -155,6 +233,72 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=m
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_NETFILTER is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
 # Device Drivers
 #
 
@@ -163,10 +307,15 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -183,7 +332,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -193,19 +341,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -216,6 +354,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
 
 #
@@ -226,6 +365,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -238,59 +378,8 @@ CONFIG_ATA_OVER_ETH=m
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=m
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
+# Network device support
 #
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -303,12 +392,27 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -327,13 +431,16 @@ CONFIG_MII=y
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 CONFIG_TITAN_GE=y
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -346,6 +453,8 @@ CONFIG_TITAN_GE=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -354,6 +463,8 @@ CONFIG_TITAN_GE=y
 # CONFIG_FDDI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -371,20 +482,10 @@ CONFIG_TITAN_GE=y
 # CONFIG_INPUT is not set
 
 #
-# Userland interfaces
+# Hardware I/O ports
 #
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 # CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
+# CONFIG_GAMEPORT is not set
 
 #
 # Character devices
@@ -405,6 +506,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -432,6 +534,10 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -442,10 +548,20 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -459,7 +575,6 @@ CONFIG_GEN_RTC_X=y
 # Graphics support
 #
 # CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -469,12 +584,12 @@ CONFIG_GEN_RTC_X=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
@@ -493,6 +608,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 # CONFIG_EXT2_FS is not set
@@ -500,13 +619,16 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -527,11 +649,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -552,7 +673,7 @@ CONFIG_NFS_FS=y
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
@@ -573,8 +694,11 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_MAGIC_SYSRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -583,6 +707,8 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_HIGHMEM is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -599,7 +725,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -609,7 +759,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=m
+CONFIG_CRC32=m
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/ddb5xxx/Kconfig b/arch/mips/ddb5xxx/Kconfig
new file mode 100644
index 000000000000..e9b5de49f4c2
--- /dev/null
+++ b/arch/mips/ddb5xxx/Kconfig
@@ -0,0 +1,4 @@
+config DDB5477_BUS_FREQUENCY
+	int "bus frequency (in kHZ, 0 for auto-detect)"
+	depends on DDB5477
+	default 0
diff --git a/arch/mips/ddb5xxx/common/rtc_ds1386.c b/arch/mips/ddb5xxx/common/rtc_ds1386.c
index f5b11508ff2f..995896ac0e39 100644
--- a/arch/mips/ddb5xxx/common/rtc_ds1386.c
+++ b/arch/mips/ddb5xxx/common/rtc_ds1386.c
@@ -41,7 +41,9 @@ rtc_ds1386_get_time(void)
 	u8 byte;
 	u8 temp;
 	unsigned int year, month, day, hour, minute, second;
+	unsigned long flags;
 
+	spin_lock_irqsave(&rtc_lock, flags);
 	/* let us freeze external registers */
 	byte = READ_RTC(0xB);
 	byte &= 0x3f;
@@ -60,6 +62,7 @@ rtc_ds1386_get_time(void)
 	/* enable time transfer */
 	byte |= 0x80;
 	WRITE_RTC(0xB, byte);
+	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	/* calc hour */
 	if (temp & 0x40) {
@@ -81,7 +84,9 @@ rtc_ds1386_set_time(unsigned long t)
 	u8 byte;
 	u8 temp;
 	u8 year, month, day, hour, minute, second;
+	unsigned long flags;
 
+	spin_lock_irqsave(&rtc_lock, flags);
 	/* let us freeze external registers */
 	byte = READ_RTC(0xB);
 	byte &= 0x3f;
@@ -133,6 +138,7 @@ rtc_ds1386_set_time(unsigned long t)
 	if (second != READ_RTC(0x1)) {
 		WRITE_RTC(0x1, second);
 	}
+	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	return 0;
 }
diff --git a/arch/mips/ddb5xxx/ddb5074/nile4_pic.c b/arch/mips/ddb5xxx/ddb5074/nile4_pic.c
index 68c127cd70c9..8743ffce8653 100644
--- a/arch/mips/ddb5xxx/ddb5074/nile4_pic.c
+++ b/arch/mips/ddb5xxx/ddb5074/nile4_pic.c
@@ -209,14 +209,13 @@ static void nile4_irq_end(unsigned int irq) {
 #define nile4_irq_shutdown nile4_disable_irq
 
 static hw_irq_controller nile4_irq_controller = {
-    "nile4",
-    nile4_irq_startup,
-    nile4_irq_shutdown,
-    nile4_enable_irq,
-    nile4_disable_irq,
-    nile4_ack_irq,
-    nile4_irq_end,
-    NULL
+	.typename = "nile4",
+	.startup = nile4_irq_startup,
+	.shutdown = nile4_irq_shutdown,
+	.enable = nile4_enable_irq,
+	.disable = nile4_disable_irq,
+	.ack = nile4_ack_irq,
+	.end = nile4_irq_end,
 };
 
 void nile4_irq_setup(u32 base) {
diff --git a/arch/mips/ddb5xxx/ddb5074/setup.c b/arch/mips/ddb5xxx/ddb5074/setup.c
index a73a5978d550..11535be265b9 100644
--- a/arch/mips/ddb5xxx/ddb5074/setup.c
+++ b/arch/mips/ddb5xxx/ddb5074/setup.c
@@ -85,7 +85,7 @@ static void __init ddb_time_init(void)
 
 
 
-static void __init ddb5074_setup(void)
+void __init plat_setup(void)
 {
 	set_io_port_base(NILE4_PCI_IO_BASE);
 	isa_slot_offset = NILE4_PCI_MEM_BASE;
@@ -106,8 +106,6 @@ static void __init ddb5074_setup(void)
 	panic_timeout = 180;
 }
 
-early_initcall(ddb5074_setup);
-
 #define USE_NILE4_SERIAL	0
 
 #if USE_NILE4_SERIAL
diff --git a/arch/mips/ddb5xxx/ddb5476/setup.c b/arch/mips/ddb5xxx/ddb5476/setup.c
index 71531f8146ea..f4e480a74edf 100644
--- a/arch/mips/ddb5xxx/ddb5476/setup.c
+++ b/arch/mips/ddb5xxx/ddb5476/setup.c
@@ -124,7 +124,7 @@ static struct {
 
 static void ddb5476_board_init(void);
 
-static void __init ddb5476_setup(void)
+void __init plat_setup(void)
 {
 	set_io_port_base(KSEG1ADDR(DDB_PCI_IO_BASE));
 
@@ -158,8 +158,6 @@ static void __init ddb5476_setup(void)
 	ddb5476_board_init();
 }
 
-early_initcall(ddb5476_setup);
-
 /*
  * We don't trust bios.  We essentially does hardware re-initialization
  * as complete as possible, as far as we know we can safely do.
diff --git a/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c b/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c
index a77682be01ac..f66fe5b58636 100644
--- a/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c
+++ b/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c
@@ -53,14 +53,13 @@ static void vrc5476_irq_end(uint irq)
 }
 
 static hw_irq_controller vrc5476_irq_controller = {
-	"vrc5476",
-	vrc5476_irq_startup,
-	vrc5476_irq_shutdown,
-	vrc5476_irq_enable,
-	vrc5476_irq_disable,
-	vrc5476_irq_ack,
-	vrc5476_irq_end,
-	NULL				/* no affinity stuff for UP */
+	.typename = "vrc5476",
+	.startup = vrc5476_irq_startup,
+	.shutdown = vrc5476_irq_shutdown,
+	.enable = vrc5476_irq_enable,
+	.disable = vrc5476_irq_disable,
+	.ack = vrc5476_irq_ack,
+	.end = vrc5476_irq_end
 };
 
 void __init
diff --git a/arch/mips/ddb5xxx/ddb5477/irq_5477.c b/arch/mips/ddb5xxx/ddb5477/irq_5477.c
index 0d5e706207ec..5fcd5f070cdc 100644
--- a/arch/mips/ddb5xxx/ddb5477/irq_5477.c
+++ b/arch/mips/ddb5xxx/ddb5477/irq_5477.c
@@ -90,14 +90,13 @@ vrc5477_irq_end(unsigned int irq)
 }
 
 hw_irq_controller vrc5477_irq_controller = {
-	"vrc5477_irq",
-	vrc5477_irq_startup,
-	vrc5477_irq_shutdown,
-	vrc5477_irq_enable,
-	vrc5477_irq_disable,
-	vrc5477_irq_ack,
-	vrc5477_irq_end,
-	NULL			/* no affinity stuff for UP */
+	.typename = "vrc5477_irq",
+	.startup = vrc5477_irq_startup,
+	.shutdown = vrc5477_irq_shutdown,
+	.enable = vrc5477_irq_enable,
+	.disable = vrc5477_irq_disable,
+	.ack = vrc5477_irq_ack,
+	.end = vrc5477_irq_end
 };
 
 void __init vrc5477_irq_init(u32 irq_base)
diff --git a/arch/mips/ddb5xxx/ddb5477/lcd44780.c b/arch/mips/ddb5xxx/ddb5477/lcd44780.c
index 35c6c22610c5..9510b9ae6453 100644
--- a/arch/mips/ddb5xxx/ddb5477/lcd44780.c
+++ b/arch/mips/ddb5xxx/ddb5477/lcd44780.c
@@ -55,7 +55,7 @@ void lcd44780_data(unsigned char c)
 
 void lcd44780_puts(const char* s)
 {
-	int i,j;
+	int j;
 	int pos = 0;
 
 	lcd44780_command(LCD44780_CLEAR);
@@ -76,8 +76,12 @@ void lcd44780_puts(const char* s)
 		}
 	}
 #ifdef LCD44780_PUTS_PAUSE
-	for(i = 1; i < 2000; i++)
-		lcd44780_wait();
+	{
+		int i;
+
+		for(i = 1; i < 2000; i++)
+			lcd44780_wait();
+	}
 #endif
 }
 
diff --git a/arch/mips/ddb5xxx/ddb5477/setup.c b/arch/mips/ddb5xxx/ddb5477/setup.c
index d62f5a789b05..81163353c4a8 100644
--- a/arch/mips/ddb5xxx/ddb5477/setup.c
+++ b/arch/mips/ddb5xxx/ddb5477/setup.c
@@ -170,7 +170,7 @@ static void ddb5477_board_init(void);
 extern struct pci_controller ddb5477_ext_controller;
 extern struct pci_controller ddb5477_io_controller;
 
-static int  ddb5477_setup(void)
+void __init plat_setup(void)
 {
 	/* initialize board - we don't trust the loader */
         ddb5477_board_init();
@@ -193,12 +193,8 @@ static int  ddb5477_setup(void)
 
 	register_pci_controller (&ddb5477_ext_controller);
 	register_pci_controller (&ddb5477_io_controller);
-
-	return 0;
 }
 
-early_initcall(ddb5477_setup);
-
 static void __init ddb5477_board_init(void)
 {
 	/* ----------- setup PDARs ------------ */
diff --git a/arch/mips/dec/Makefile b/arch/mips/dec/Makefile
index 688757a97cb8..ed181fdc3ac9 100644
--- a/arch/mips/dec/Makefile
+++ b/arch/mips/dec/Makefile
@@ -2,8 +2,8 @@
 # Makefile for the DECstation family specific parts of the kernel
 #
 
-obj-y		:= ecc-berr.o int-handler.o ioasic-irq.o kn02-irq.o reset.o \
-		   setup.o time.o
+obj-y		:= ecc-berr.o int-handler.o ioasic-irq.o kn01-berr.o \
+		   kn02-irq.o kn02xa-berr.o reset.o setup.o time.o
 
 obj-$(CONFIG_PROM_CONSOLE)	+= promcon.o
 obj-$(CONFIG_CPU_HAS_WB)	+= wbflush.o
diff --git a/arch/mips/dec/ecc-berr.c b/arch/mips/dec/ecc-berr.c
index 6dbce92eb068..cc24c5ed0c05 100644
--- a/arch/mips/dec/ecc-berr.c
+++ b/arch/mips/dec/ecc-berr.c
@@ -6,7 +6,7 @@
  *	5000/240 (KN03), 5000/260 (KN05) and DECsystem 5900 (KN03),
  *	5900/260 (KN05) systems.
  *
- *	Copyright (c) 2003  Maciej W. Rozycki
+ *	Copyright (c) 2003, 2005  Maciej W. Rozycki
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
@@ -15,6 +15,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/spinlock.h>
@@ -57,7 +58,7 @@ static int dec_ecc_be_backend(struct pt_regs *regs, int is_fixup, int invoker)
 
 	const char *kind, *agent, *cycle, *event;
 	const char *status = "", *xbit = "", *fmt = "";
-	dma_addr_t address;
+	unsigned long address;
 	u16 syn = 0, sngl;
 
 	int i = 0;
@@ -66,7 +67,7 @@ static int dec_ecc_be_backend(struct pt_regs *regs, int is_fixup, int invoker)
 	u32 chksyn = *kn0x_chksyn;
 	int action = MIPS_BE_FATAL;
 
-	/* For non-ECC ack ASAP, so any subsequent errors get caught. */
+	/* For non-ECC ack ASAP, so that any subsequent errors get caught. */
 	if ((erraddr & (KN0X_EAR_VALID | KN0X_EAR_ECCERR)) == KN0X_EAR_VALID)
 		dec_ecc_be_ack();
 
@@ -74,7 +75,7 @@ static int dec_ecc_be_backend(struct pt_regs *regs, int is_fixup, int invoker)
 
 	if (!(erraddr & KN0X_EAR_VALID)) {
 		/* No idea what happened. */
-		printk(KERN_ALERT "Unidentified bus error %s.\n", kind);
+		printk(KERN_ALERT "Unidentified bus error %s\n", kind);
 		return action;
 	}
 
@@ -126,7 +127,7 @@ static int dec_ecc_be_backend(struct pt_regs *regs, int is_fixup, int invoker)
 			/* Ack now, no rewrite will happen. */
 			dec_ecc_be_ack();
 
-			fmt = KERN_ALERT "%s" "invalid.\n";
+			fmt = KERN_ALERT "%s" "invalid\n";
 		} else {
 			sngl = syn & KN0X_ESR_SNGLO;
 			syn &= KN0X_ESR_SYNLO;
@@ -144,7 +145,8 @@ static int dec_ecc_be_backend(struct pt_regs *regs, int is_fixup, int invoker)
 			} else if (!sngl) {
 				status = dbestr;
 			} else {
-				volatile u32 *ptr = (void *)KSEG1ADDR(address);
+				volatile u32 *ptr =
+					(void *)CKSEG1ADDR(address);
 
 				*ptr = *ptr;		/* Rewrite. */
 				iob();
@@ -160,12 +162,12 @@ static int dec_ecc_be_backend(struct pt_regs *regs, int is_fixup, int invoker)
 				if (syn == 0x01) {
 					fmt = KERN_ALERT "%s"
 					      "%#04x -- %s bit error "
-					      "at check bit C%s.\n";
+					      "at check bit C%s\n";
 					xbit = "X";
 				} else {
 					fmt = KERN_ALERT "%s"
 					      "%#04x -- %s bit error "
-					      "at check bit C%s%u.\n";
+					      "at check bit C%s%u\n";
 				}
 				i = syn >> 2;
 			} else {
@@ -175,16 +177,16 @@ static int dec_ecc_be_backend(struct pt_regs *regs, int is_fixup, int invoker)
 				if (i < 32)
 					fmt = KERN_ALERT "%s"
 					      "%#04x -- %s bit error "
-					      "at data bit D%s%u.\n";
+					      "at data bit D%s%u\n";
 				else
 					fmt = KERN_ALERT "%s"
-					      "%#04x -- %s bit error.\n";
+					      "%#04x -- %s bit error\n";
 			}
 		}
 	}
 
 	if (action != MIPS_BE_FIXUP)
-		printk(KERN_ALERT "Bus error %s: %s %s %s at %#010lx.\n",
+		printk(KERN_ALERT "Bus error %s: %s %s %s at %#010lx\n",
 			kind, agent, cycle, event, address);
 
 	if (action != MIPS_BE_FIXUP && erraddr & KN0X_EAR_ECCERR)
@@ -203,11 +205,11 @@ irqreturn_t dec_ecc_be_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 	int action = dec_ecc_be_backend(regs, 0, 1);
 
 	if (action == MIPS_BE_DISCARD)
-		return IRQ_NONE;
+		return IRQ_HANDLED;
 
 	/*
-	 * FIXME: Find affected processes and kill them, otherwise we
-	 * must die.
+	 * FIXME: Find the affected processes and kill them, otherwise
+	 * we must die.
 	 *
 	 * The interrupt is asynchronously delivered thus EPC and RA
 	 * may be irrelevant, but are printed for a reference.
@@ -225,16 +227,16 @@ irqreturn_t dec_ecc_be_interrupt(int irq, void *dev_id, struct pt_regs *regs)
  */
 static inline void dec_kn02_be_init(void)
 {
-	volatile u32 *csr = (void *)KN02_CSR_BASE;
+	volatile u32 *csr = (void *)CKSEG1ADDR(KN02_SLOT_BASE + KN02_CSR);
 	unsigned long flags;
 
-	kn0x_erraddr = (void *)(KN02_SLOT_BASE + KN02_ERRADDR);
-	kn0x_chksyn = (void *)(KN02_SLOT_BASE + KN02_CHKSYN);
+	kn0x_erraddr = (void *)CKSEG1ADDR(KN02_SLOT_BASE + KN02_ERRADDR);
+	kn0x_chksyn = (void *)CKSEG1ADDR(KN02_SLOT_BASE + KN02_CHKSYN);
 
 	spin_lock_irqsave(&kn02_lock, flags);
 
 	/* Preset write-only bits of the Control Register cache. */
-	cached_kn02_csr = *csr | KN03_CSR_LEDS;
+	cached_kn02_csr = *csr | KN02_CSR_LEDS;
 
 	/* Set normal ECC detection and generation. */
 	cached_kn02_csr &= ~(KN02_CSR_DIAGCHK | KN02_CSR_DIAGGEN);
@@ -248,11 +250,11 @@ static inline void dec_kn02_be_init(void)
 
 static inline void dec_kn03_be_init(void)
 {
-	volatile u32 *mcr = (void *)(KN03_SLOT_BASE + IOASIC_MCR);
-	volatile u32 *mbcs = (void *)(KN03_SLOT_BASE + KN05_MB_CSR);
+	volatile u32 *mcr = (void *)CKSEG1ADDR(KN03_SLOT_BASE + IOASIC_MCR);
+	volatile u32 *mbcs = (void *)CKSEG1ADDR(KN4K_SLOT_BASE + KN4K_MB_CSR);
 
-	kn0x_erraddr = (void *)(KN03_SLOT_BASE + IOASIC_ERRADDR);
-	kn0x_chksyn = (void *)(KN03_SLOT_BASE + IOASIC_CHKSYN);
+	kn0x_erraddr = (void *)CKSEG1ADDR(KN03_SLOT_BASE + IOASIC_ERRADDR);
+	kn0x_chksyn = (void *)CKSEG1ADDR(KN03_SLOT_BASE + IOASIC_CHKSYN);
 
 	/*
 	 * Set normal ECC detection and generation, enable ECC correction.
@@ -264,7 +266,7 @@ static inline void dec_kn03_be_init(void)
 	*mcr = (*mcr & ~(KN03_MCR_DIAGCHK | KN03_MCR_DIAGGEN)) |
 	       KN03_MCR_CORRECT;
 	if (current_cpu_data.cputype == CPU_R4400SC)
-		*mbcs |= KN05_MB_CSR_EE;
+		*mbcs |= KN4K_MB_CSR_EE;
 	fast_iob();
 }
 
diff --git a/arch/mips/dec/int-handler.S b/arch/mips/dec/int-handler.S
index c89768d5c4e5..41fa372007bf 100644
--- a/arch/mips/dec/int-handler.S
+++ b/arch/mips/dec/int-handler.S
@@ -2,9 +2,9 @@
  * arch/mips/dec/int-handler.S
  *
  * Copyright (C) 1995, 1996, 1997 Paul M. Antoine and Harald Koerfgen
- * Copyright (C) 2000, 2001, 2002, 2003  Maciej W. Rozycki
+ * Copyright (C) 2000, 2001, 2002, 2003, 2005  Maciej W. Rozycki
  *
- * Written by Ralf Baechle and Andreas Busse, modified for DECStation
+ * Written by Ralf Baechle and Andreas Busse, modified for DECstation
  * support by Paul Antoine and Harald Koerfgen.
  *
  * completly rewritten:
@@ -14,11 +14,12 @@
  * by Maciej W. Rozycki.
  */
 #include <linux/config.h>
+
+#include <asm/addrspace.h>
 #include <asm/asm.h>
-#include <asm/regdef.h>
 #include <asm/mipsregs.h>
+#include <asm/regdef.h>
 #include <asm/stackframe.h>
-#include <asm/addrspace.h>
 
 #include <asm/dec/interrupts.h>
 #include <asm/dec/ioasic_addrs.h>
@@ -28,11 +29,14 @@
 #include <asm/dec/kn02xa.h>
 #include <asm/dec/kn03.h>
 
+#define KN02_CSR_BASE		CKSEG1ADDR(KN02_SLOT_BASE + KN02_CSR)
+#define KN02XA_IOASIC_BASE	CKSEG1ADDR(KN02XA_SLOT_BASE + IOASIC_IOCTL)
+#define KN03_IOASIC_BASE	CKSEG1ADDR(KN03_SLOT_BASE + IOASIC_IOCTL)
 
 		.text
 		.set	noreorder
 /*
- * decstation_handle_int: Interrupt handler for DECStations
+ * decstation_handle_int: Interrupt handler for DECstations
  *
  * We follow the model in the Indy interrupt code by David Miller, where he
  * says: a lot of complication here is taken away because:
@@ -48,7 +52,7 @@
  * 3) Linux only thinks in terms of all IRQs on or all IRQs
  *    off, nothing in between like BSD spl() brain-damage.
  *
- * Furthermore, the IRQs on the DECStations look basically (barring
+ * Furthermore, the IRQs on the DECstations look basically (barring
  * software IRQs which we don't use at all) like...
  *
  * DS2100/3100's, aka kn01, aka Pmax:
@@ -61,7 +65,7 @@
  *             3        Lance Ethernet
  *             4        DZ11 serial
  *             5        RTC
- *             6        Memory Controller
+ *             6        Memory Controller & Video
  *             7        FPU
  *
  * DS5000/200, aka kn02, aka 3max:
diff --git a/arch/mips/dec/kn01-berr.c b/arch/mips/dec/kn01-berr.c
new file mode 100644
index 000000000000..b9271db9bc76
--- /dev/null
+++ b/arch/mips/dec/kn01-berr.c
@@ -0,0 +1,201 @@
+/*
+ *	linux/arch/mips/dec/kn01-berr.c
+ *
+ *	Bus error event handling code for DECstation/DECsystem 3100
+ *	and 2100 (KN01) systems equipped with parity error detection
+ *	logic.
+ *
+ *	Copyright (c) 2005  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#include <asm/inst.h>
+#include <asm/mipsregs.h>
+#include <asm/page.h>
+#include <asm/system.h>
+#include <asm/traps.h>
+#include <asm/uaccess.h>
+
+#include <asm/dec/kn01.h>
+
+
+/* CP0 hazard avoidance. */
+#define BARRIER				\
+	__asm__ __volatile__(		\
+		".set	push\n\t"	\
+		".set	noreorder\n\t"	\
+		"nop\n\t"		\
+		".set	pop\n\t")
+
+/*
+ * Bits 7:0 of the Control Register are write-only -- the
+ * corresponding bits of the Status Register have a different
+ * meaning.  Hence we use a cache.  It speeds up things a bit
+ * as well.
+ *
+ * There is no default value -- it has to be initialized.
+ */
+u16 cached_kn01_csr;
+DEFINE_SPINLOCK(kn01_lock);
+
+
+static inline void dec_kn01_be_ack(void)
+{
+	volatile u16 *csr = (void *)CKSEG1ADDR(KN01_SLOT_BASE + KN01_CSR);
+	unsigned long flags;
+
+	spin_lock_irqsave(&kn01_lock, flags);
+
+	*csr = cached_kn01_csr | KN01_CSR_MEMERR;	/* Clear bus IRQ. */
+	iob();
+
+	spin_unlock_irqrestore(&kn01_lock, flags);
+}
+
+static int dec_kn01_be_backend(struct pt_regs *regs, int is_fixup, int invoker)
+{
+	volatile u32 *kn01_erraddr = (void *)CKSEG1ADDR(KN01_SLOT_BASE +
+							KN01_ERRADDR);
+
+	static const char excstr[] = "exception";
+	static const char intstr[] = "interrupt";
+	static const char cpustr[] = "CPU";
+	static const char mreadstr[] = "memory read";
+	static const char readstr[] = "read";
+	static const char writestr[] = "write";
+	static const char timestr[] = "timeout";
+	static const char paritystr[] = "parity error";
+
+	int data = regs->cp0_cause & 4;
+	unsigned int __user *pc = (unsigned int __user *)regs->cp0_epc +
+				  ((regs->cp0_cause & CAUSEF_BD) != 0);
+	union mips_instruction insn;
+	unsigned long entrylo, offset;
+	long asid, entryhi, vaddr;
+
+	const char *kind, *agent, *cycle, *event;
+	unsigned long address;
+
+	u32 erraddr = *kn01_erraddr;
+	int action = MIPS_BE_FATAL;
+
+	/* Ack ASAP, so that any subsequent errors get caught. */
+	dec_kn01_be_ack();
+
+	kind = invoker ? intstr : excstr;
+
+	agent = cpustr;
+
+	if (invoker)
+		address = erraddr;
+	else {
+		/* Bloody hardware doesn't record the address for reads... */
+		if (data) {
+			/* This never faults. */
+			__get_user(insn.word, pc);
+			vaddr = regs->regs[insn.i_format.rs] +
+				insn.i_format.simmediate;
+		} else
+			vaddr = (long)pc;
+		if (KSEGX(vaddr) == CKSEG0 || KSEGX(vaddr) == CKSEG1)
+			address = CPHYSADDR(vaddr);
+		else {
+			/* Peek at what physical address the CPU used. */
+			asid = read_c0_entryhi();
+			entryhi = asid & (PAGE_SIZE - 1);
+			entryhi |= vaddr & ~(PAGE_SIZE - 1);
+			write_c0_entryhi(entryhi);
+			BARRIER;
+			tlb_probe();
+			/* No need to check for presence. */
+			tlb_read();
+			entrylo = read_c0_entrylo0();
+			write_c0_entryhi(asid);
+			offset = vaddr & (PAGE_SIZE - 1);
+			address = (entrylo & ~(PAGE_SIZE - 1)) | offset;
+		}
+	}
+
+	/* Treat low 256MB as memory, high -- as I/O. */
+	if (address < 0x10000000) {
+		cycle = mreadstr;
+		event = paritystr;
+	} else {
+		cycle = invoker ? writestr : readstr;
+		event = timestr;
+	}
+
+	if (is_fixup)
+		action = MIPS_BE_FIXUP;
+
+	if (action != MIPS_BE_FIXUP)
+		printk(KERN_ALERT "Bus error %s: %s %s %s at %#010lx\n",
+			kind, agent, cycle, event, address);
+
+	return action;
+}
+
+int dec_kn01_be_handler(struct pt_regs *regs, int is_fixup)
+{
+	return dec_kn01_be_backend(regs, is_fixup, 0);
+}
+
+irqreturn_t dec_kn01_be_interrupt(int irq, void *dev_id,
+				    struct pt_regs *regs)
+{
+	volatile u16 *csr = (void *)CKSEG1ADDR(KN01_SLOT_BASE + KN01_CSR);
+	int action;
+
+	if (!(*csr & KN01_CSR_MEMERR))
+		return IRQ_NONE;		/* Must have been video. */
+
+	action = dec_kn01_be_backend(regs, 0, 1);
+
+	if (action == MIPS_BE_DISCARD)
+		return IRQ_HANDLED;
+
+	/*
+	 * FIXME: Find the affected processes and kill them, otherwise
+	 * we must die.
+	 *
+	 * The interrupt is asynchronously delivered thus EPC and RA
+	 * may be irrelevant, but are printed for a reference.
+	 */
+	printk(KERN_ALERT "Fatal bus interrupt, epc == %08lx, ra == %08lx\n",
+	       regs->cp0_epc, regs->regs[31]);
+	die("Unrecoverable bus error", regs);
+}
+
+
+void __init dec_kn01_be_init(void)
+{
+	volatile u16 *csr = (void *)CKSEG1ADDR(KN01_SLOT_BASE + KN01_CSR);
+	unsigned long flags;
+
+	spin_lock_irqsave(&kn01_lock, flags);
+
+	/* Preset write-only bits of the Control Register cache. */
+	cached_kn01_csr = *csr;
+	cached_kn01_csr &= KN01_CSR_STATUS | KN01_CSR_PARDIS | KN01_CSR_TXDIS;
+	cached_kn01_csr |= KN01_CSR_LEDS;
+
+	/* Enable parity error detection. */
+	cached_kn01_csr &= ~KN01_CSR_PARDIS;
+	*csr = cached_kn01_csr;
+	iob();
+
+	spin_unlock_irqrestore(&kn01_lock, flags);
+
+	/* Clear any leftover errors from the firmware. */
+	dec_kn01_be_ack();
+}
diff --git a/arch/mips/dec/kn02-irq.c b/arch/mips/dec/kn02-irq.c
index e0bfcd1521e2..898bed502a34 100644
--- a/arch/mips/dec/kn02-irq.c
+++ b/arch/mips/dec/kn02-irq.c
@@ -4,7 +4,7 @@
  *	DECstation 5000/200 (KN02) Control and Status Register
  *	interrupts.
  *
- *	Copyright (c) 2002, 2003  Maciej W. Rozycki
+ *	Copyright (c) 2002, 2003, 2005  Maciej W. Rozycki
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
@@ -37,7 +37,8 @@ static int kn02_irq_base;
 
 static inline void unmask_kn02_irq(unsigned int irq)
 {
-	volatile u32 *csr = (volatile u32 *)KN02_CSR_BASE;
+	volatile u32 *csr = (volatile u32 *)CKSEG1ADDR(KN02_SLOT_BASE +
+						       KN02_CSR);
 
 	cached_kn02_csr |= (1 << (irq - kn02_irq_base + 16));
 	*csr = cached_kn02_csr;
@@ -45,7 +46,8 @@ static inline void unmask_kn02_irq(unsigned int irq)
 
 static inline void mask_kn02_irq(unsigned int irq)
 {
-	volatile u32 *csr = (volatile u32 *)KN02_CSR_BASE;
+	volatile u32 *csr = (volatile u32 *)CKSEG1ADDR(KN02_SLOT_BASE +
+						       KN02_CSR);
 
 	cached_kn02_csr &= ~(1 << (irq - kn02_irq_base + 16));
 	*csr = cached_kn02_csr;
@@ -105,13 +107,14 @@ static struct hw_interrupt_type kn02_irq_type = {
 
 void __init init_kn02_irqs(int base)
 {
-	volatile u32 *csr = (volatile u32 *)KN02_CSR_BASE;
+	volatile u32 *csr = (volatile u32 *)CKSEG1ADDR(KN02_SLOT_BASE +
+						       KN02_CSR);
 	unsigned long flags;
 	int i;
 
 	/* Mask interrupts. */
 	spin_lock_irqsave(&kn02_lock, flags);
-	cached_kn02_csr &= ~KN03_CSR_IOINTEN;
+	cached_kn02_csr &= ~KN02_CSR_IOINTEN;
 	*csr = cached_kn02_csr;
 	iob();
 	spin_unlock_irqrestore(&kn02_lock, flags);
diff --git a/arch/mips/dec/kn02xa-berr.c b/arch/mips/dec/kn02xa-berr.c
new file mode 100644
index 000000000000..6cd3f94f79fe
--- /dev/null
+++ b/arch/mips/dec/kn02xa-berr.c
@@ -0,0 +1,139 @@
+/*
+ *	linux/arch/mips/dec/kn02xa-berr.c
+ *
+ *	Bus error event handling code for 5000-series systems equipped
+ *	with parity error detection logic, i.e. DECstation/DECsystem
+ *	5000/120, /125, /133 (KN02-BA), 5000/150 (KN04-BA) and Personal
+ *	DECstation/DECsystem 5000/20, /25, /33 (KN02-CA), 5000/50
+ *	(KN04-CA) systems.
+ *
+ *	Copyright (c) 2005  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#include <asm/addrspace.h>
+#include <asm/system.h>
+#include <asm/traps.h>
+
+#include <asm/dec/kn02ca.h>
+#include <asm/dec/kn02xa.h>
+#include <asm/dec/kn05.h>
+
+static inline void dec_kn02xa_be_ack(void)
+{
+	volatile u32 *mer = (void *)CKSEG1ADDR(KN02XA_MER);
+	volatile u32 *mem_intr = (void *)CKSEG1ADDR(KN02XA_MEM_INTR);
+
+	*mer = KN02CA_MER_INTR;		/* Clear errors; keep the ARC IRQ. */
+	*mem_intr = 0;			/* Any write clears the bus IRQ. */
+	iob();
+}
+
+static int dec_kn02xa_be_backend(struct pt_regs *regs, int is_fixup,
+				 int invoker)
+{
+	volatile u32 *kn02xa_mer = (void *)CKSEG1ADDR(KN02XA_MER);
+	volatile u32 *kn02xa_ear = (void *)CKSEG1ADDR(KN02XA_EAR);
+
+	static const char excstr[] = "exception";
+	static const char intstr[] = "interrupt";
+	static const char cpustr[] = "CPU";
+	static const char mreadstr[] = "memory read";
+	static const char readstr[] = "read";
+	static const char writestr[] = "write";
+	static const char timestr[] = "timeout";
+	static const char paritystr[] = "parity error";
+	static const char lanestat[][4] = { " OK", "BAD" };
+
+	const char *kind, *agent, *cycle, *event;
+	unsigned long address;
+
+	u32 mer = *kn02xa_mer;
+	u32 ear = *kn02xa_ear;
+	int action = MIPS_BE_FATAL;
+
+	/* Ack ASAP, so that any subsequent errors get caught. */
+	dec_kn02xa_be_ack();
+
+	kind = invoker ? intstr : excstr;
+
+	/* No DMA errors? */
+	agent = cpustr;
+
+	address = ear & KN02XA_EAR_ADDRESS;
+
+	/* Low 256MB is decoded as memory, high -- as TC. */
+	if (address < 0x10000000) {
+		cycle = mreadstr;
+		event = paritystr;
+	} else {
+		cycle = invoker ? writestr : readstr;
+		event = timestr;
+	}
+
+	if (is_fixup)
+		action = MIPS_BE_FIXUP;
+
+	if (action != MIPS_BE_FIXUP)
+		printk(KERN_ALERT "Bus error %s: %s %s %s at %#010lx\n",
+			kind, agent, cycle, event, address);
+
+	if (action != MIPS_BE_FIXUP && address < 0x10000000)
+		printk(KERN_ALERT "  Byte lane status %#3x -- "
+		       "#3: %s, #2: %s, #1: %s, #0: %s\n",
+		       (mer & KN02XA_MER_BYTERR) >> 8,
+		       lanestat[(mer & KN02XA_MER_BYTERR_3) != 0],
+		       lanestat[(mer & KN02XA_MER_BYTERR_2) != 0],
+		       lanestat[(mer & KN02XA_MER_BYTERR_1) != 0],
+		       lanestat[(mer & KN02XA_MER_BYTERR_0) != 0]);
+
+	return action;
+}
+
+int dec_kn02xa_be_handler(struct pt_regs *regs, int is_fixup)
+{
+	return dec_kn02xa_be_backend(regs, is_fixup, 0);
+}
+
+irqreturn_t dec_kn02xa_be_interrupt(int irq, void *dev_id,
+				    struct pt_regs *regs)
+{
+	int action = dec_kn02xa_be_backend(regs, 0, 1);
+
+	if (action == MIPS_BE_DISCARD)
+		return IRQ_HANDLED;
+
+	/*
+	 * FIXME: Find the affected processes and kill them, otherwise
+	 * we must die.
+	 *
+	 * The interrupt is asynchronously delivered thus EPC and RA
+	 * may be irrelevant, but are printed for a reference.
+	 */
+	printk(KERN_ALERT "Fatal bus interrupt, epc == %08lx, ra == %08lx\n",
+	       regs->cp0_epc, regs->regs[31]);
+	die("Unrecoverable bus error", regs);
+}
+
+
+void __init dec_kn02xa_be_init(void)
+{
+	volatile u32 *mbcs = (void *)CKSEG1ADDR(KN4K_SLOT_BASE + KN4K_MB_CSR);
+
+        /* For KN04 we need to make sure EE (?) is enabled in the MB.  */
+        if (current_cpu_data.cputype == CPU_R4000SC)
+		*mbcs |= KN4K_MB_CSR_EE;
+	fast_iob();
+
+	/* Clear any leftover errors from the firmware. */
+	dec_kn02xa_be_ack();
+}
diff --git a/arch/mips/dec/prom/identify.c b/arch/mips/dec/prom/identify.c
index 9380588cb15c..81d5e878ddce 100644
--- a/arch/mips/dec/prom/identify.c
+++ b/arch/mips/dec/prom/identify.c
@@ -2,7 +2,7 @@
  * identify.c: machine identification code.
  *
  * Copyright (C) 1998 Harald Koerfgen and Paul M. Antoine
- * Copyright (C) 2002, 2003, 2004  Maciej W. Rozycki
+ * Copyright (C) 2002, 2003, 2004, 2005  Maciej W. Rozycki
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -12,6 +12,7 @@
 #include <linux/types.h>
 
 #include <asm/bootinfo.h>
+
 #include <asm/dec/ioasic.h>
 #include <asm/dec/ioasic_addrs.h>
 #include <asm/dec/kn01.h>
@@ -21,6 +22,7 @@
 #include <asm/dec/kn03.h>
 #include <asm/dec/kn230.h>
 #include <asm/dec/prom.h>
+#include <asm/dec/system.h>
 
 #include "dectypes.h"
 
@@ -68,34 +70,44 @@ EXPORT_SYMBOL(dec_rtc_base);
 
 static inline void prom_init_kn01(void)
 {
-	dec_rtc_base = (void *)KN01_RTC_BASE;
+	dec_kn_slot_base = KN01_SLOT_BASE;
 	dec_kn_slot_size = KN01_SLOT_SIZE;
+
+	dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + KN01_RTC);
 }
 
 static inline void prom_init_kn230(void)
 {
-	dec_rtc_base = (void *)KN01_RTC_BASE;
+	dec_kn_slot_base = KN01_SLOT_BASE;
 	dec_kn_slot_size = KN01_SLOT_SIZE;
+
+	dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + KN01_RTC);
 }
 
 static inline void prom_init_kn02(void)
 {
-	dec_rtc_base = (void *)KN02_RTC_BASE;
+	dec_kn_slot_base = KN02_SLOT_BASE;
 	dec_kn_slot_size = KN02_SLOT_SIZE;
+
+	dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + KN02_RTC);
 }
 
 static inline void prom_init_kn02xa(void)
 {
-	ioasic_base = (void *)KN02XA_IOASIC_BASE;
-	dec_rtc_base = (void *)KN02XA_RTC_BASE;
+	dec_kn_slot_base = KN02XA_SLOT_BASE;
 	dec_kn_slot_size = IOASIC_SLOT_SIZE;
+
+	ioasic_base = (void *)CKSEG1ADDR(dec_kn_slot_base + IOASIC_IOCTL);
+	dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + IOASIC_TOY);
 }
 
 static inline void prom_init_kn03(void)
 {
-	ioasic_base = (void *)KN03_IOASIC_BASE;
-	dec_rtc_base = (void *)KN03_RTC_BASE;
+	dec_kn_slot_base = KN03_SLOT_BASE;
 	dec_kn_slot_size = IOASIC_SLOT_SIZE;
+
+	ioasic_base = (void *)CKSEG1ADDR(dec_kn_slot_base + IOASIC_IOCTL);
+	dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + IOASIC_TOY);
 }
 
 
diff --git a/arch/mips/dec/prom/init.c b/arch/mips/dec/prom/init.c
index 60f74256e689..32a7cc7e4c65 100644
--- a/arch/mips/dec/prom/init.c
+++ b/arch/mips/dec/prom/init.c
@@ -6,6 +6,8 @@
  */
 #include <linux/config.h>
 #include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/linkage.h>
 #include <linux/smp.h>
 #include <linux/string.h>
 #include <linux/types.h>
@@ -85,17 +87,13 @@ void __init which_prom(s32 magic, s32 *prom_vec)
 
 void __init prom_init(void)
 {
-	extern void dec_machine_halt(void);
+	extern void ATTRIB_NORET dec_machine_halt(void);
 	static char cpu_msg[] __initdata =
 		"Sorry, this kernel is compiled for a wrong CPU type!\n";
-	static char r3k_msg[] __initdata =
-		"Please recompile with \"CONFIG_CPU_R3000 = y\".\n";
-	static char r4k_msg[] __initdata =
-		"Please recompile with \"CONFIG_CPU_R4x00 = y\".\n";
 	s32 argc = fw_arg0;
-	s32 argv = fw_arg1;
+	s32 *argv = (void *)fw_arg1;
 	u32 magic = fw_arg2;
-	s32 prom_vec = fw_arg3;
+	s32 *prom_vec = (void *)fw_arg3;
 
 	/*
 	 * Determine which PROM we have
@@ -113,6 +111,8 @@ void __init prom_init(void)
 #if defined(CONFIG_CPU_R3000)
 	if ((current_cpu_data.cputype == CPU_R4000SC) ||
 	    (current_cpu_data.cputype == CPU_R4400SC)) {
+		static char r4k_msg[] __initdata =
+			"Please recompile with \"CONFIG_CPU_R4x00 = y\".\n";
 		printk(cpu_msg);
 		printk(r4k_msg);
 		dec_machine_halt();
@@ -122,6 +122,8 @@ void __init prom_init(void)
 #if defined(CONFIG_CPU_R4X00)
 	if ((current_cpu_data.cputype == CPU_R3000) ||
 	    (current_cpu_data.cputype == CPU_R3000A)) {
+		static char r3k_msg[] __initdata =
+			"Please recompile with \"CONFIG_CPU_R3000 = y\".\n";
 		printk(cpu_msg);
 		printk(r3k_msg);
 		dec_machine_halt();
diff --git a/arch/mips/dec/prom/memory.c b/arch/mips/dec/prom/memory.c
index e4f6f26425ea..83d4556c3cb5 100644
--- a/arch/mips/dec/prom/memory.c
+++ b/arch/mips/dec/prom/memory.c
@@ -35,22 +35,22 @@ static inline void pmax_setup_memory_region(void)
 	extern char genexcept_early;
 
 	/* Install exception handler */
-	memcpy(&old_handler, (void *)(KSEG0 + 0x80), 0x80);
-	memcpy((void *)(KSEG0 + 0x80), &genexcept_early, 0x80);
+	memcpy(&old_handler, (void *)(CKSEG0 + 0x80), 0x80);
+	memcpy((void *)(CKSEG0 + 0x80), &genexcept_early, 0x80);
 
 	/* read unmapped and uncached (KSEG1)
 	 * DECstations have at least 4MB RAM
 	 * Assume less than 480MB of RAM, as this is max for 5000/2xx
 	 * FIXME this should be replaced by the first free page!
 	 */
-	for (memory_page = (unsigned char *) KSEG1 + CHUNK_SIZE;
-	     (mem_err== 0) && (memory_page < ((unsigned char *) KSEG1+0x1E000000));
+	for (memory_page = (unsigned char *)CKSEG1 + CHUNK_SIZE;
+	     mem_err == 0 && memory_page < (unsigned char *)CKSEG1 + 0x1e00000;
   	     memory_page += CHUNK_SIZE) {
 		dummy = *memory_page;
 	}
-	memcpy((void *)(KSEG0 + 0x80), &old_handler, 0x80);
+	memcpy((void *)(CKSEG0 + 0x80), &old_handler, 0x80);
 
-	add_memory_region(0, (unsigned long)memory_page - KSEG1 - CHUNK_SIZE,
+	add_memory_region(0, (unsigned long)memory_page - CKSEG1 - CHUNK_SIZE,
 			  BOOT_MEM_RAM);
 }
 
@@ -65,7 +65,7 @@ static inline void rex_setup_memory_region(void)
 	memmap *bm;
 
 	/* some free 64k */
-	bm = (memmap *)KSEG0ADDR(0x28000);
+	bm = (memmap *)CKSEG0ADDR(0x28000);
 
 	bitmap_size = rex_getbitmap(bm);
 
diff --git a/arch/mips/dec/reset.c b/arch/mips/dec/reset.c
index 7e4d34d0573d..f78c6da47921 100644
--- a/arch/mips/dec/reset.c
+++ b/arch/mips/dec/reset.c
@@ -14,7 +14,7 @@ typedef void ATTRIB_NORET (* noret_func_t)(void);
 
 static inline void ATTRIB_NORET back_to_prom(void)
 {
-	noret_func_t func = (void *) KSEG1ADDR(0x1fc00000);
+	noret_func_t func = (void *)CKSEG1ADDR(0x1fc00000);
 
 	func();
 }
diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c
index 6a69309baf40..9ef54fe1feaa 100644
--- a/arch/mips/dec/setup.c
+++ b/arch/mips/dec/setup.c
@@ -1,19 +1,20 @@
 /*
- * Setup the interrupt stuff.
+ * System-specific setup, especially interrupts.
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
  * Copyright (C) 1998 Harald Koerfgen
- * Copyright (C) 2000, 2001, 2002, 2003  Maciej W. Rozycki
+ * Copyright (C) 2000, 2001, 2002, 2003, 2005  Maciej W. Rozycki
  */
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/param.h>
 #include <linux/console.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
 #include <linux/module.h>
+#include <linux/param.h>
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/types.h>
 
@@ -38,6 +39,7 @@
 #include <asm/dec/kn02ca.h>
 #include <asm/dec/kn03.h>
 #include <asm/dec/kn230.h>
+#include <asm/dec/system.h>
 
 
 extern void dec_machine_restart(char *command);
@@ -47,10 +49,16 @@ extern irqreturn_t dec_intr_halt(int irq, void *dev_id, struct pt_regs *regs);
 
 extern asmlinkage void decstation_handle_int(void);
 
+unsigned long dec_kn_slot_base, dec_kn_slot_size;
+
+EXPORT_SYMBOL(dec_kn_slot_base);
+EXPORT_SYMBOL(dec_kn_slot_size);
+
 spinlock_t ioasic_ssr_lock;
 
 volatile u32 *ioasic_base;
-unsigned long dec_kn_slot_size;
+
+EXPORT_SYMBOL(ioasic_base);
 
 /*
  * IRQ routing and priority tables.  Priorites are set as follows:
@@ -77,6 +85,9 @@ unsigned long dec_kn_slot_size;
 int dec_interrupt[DEC_NR_INTS] = {
 	[0 ... DEC_NR_INTS - 1] = -1
 };
+
+EXPORT_SYMBOL(dec_interrupt);
+
 int_ptr cpu_mask_nr_tbl[DEC_MAX_CPU_INTS][2] = {
 	{ { .i = ~0 }, { .p = dec_intr_unimplemented } },
 };
@@ -108,11 +119,20 @@ static struct irqaction haltirq = {
 /*
  * Bus error (DBE/IBE exceptions and bus interrupts) handling setup.
  */
-void __init dec_be_init(void)
+static void __init dec_be_init(void)
 {
 	switch (mips_machtype) {
 	case MACH_DS23100:	/* DS2100/DS3100 Pmin/Pmax */
+		board_be_handler = dec_kn01_be_handler;
+		busirq.handler = dec_kn01_be_interrupt;
 		busirq.flags |= SA_SHIRQ;
+		dec_kn01_be_init();
+		break;
+	case MACH_DS5000_1XX:	/* DS5000/1xx 3min */
+	case MACH_DS5000_XX:	/* DS5000/xx Maxine */
+		board_be_handler = dec_kn02xa_be_handler;
+		busirq.handler = dec_kn02xa_be_interrupt;
+		dec_kn02xa_be_init();
 		break;
 	case MACH_DS5000_200:	/* DS5000/200 3max */
 	case MACH_DS5000_2X0:	/* DS5000/240 3max+ */
@@ -128,7 +148,7 @@ void __init dec_be_init(void)
 extern void dec_time_init(void);
 extern void dec_timer_setup(struct irqaction *);
 
-static void __init decstation_setup(void)
+void __init plat_setup(void)
 {
 	board_be_init = dec_be_init;
 	board_time_init = dec_time_init;
@@ -139,9 +159,10 @@ static void __init decstation_setup(void)
 	_machine_restart = dec_machine_restart;
 	_machine_halt = dec_machine_halt;
 	_machine_power_off = dec_machine_power_off;
-}
 
-early_initcall(decstation_setup);
+	ioport_resource.start = ~0UL;
+	ioport_resource.end = 0UL;
+}
 
 /*
  * Machine-specific initialisation for KN01, aka DS2100 (aka Pmin)
@@ -206,7 +227,7 @@ static int_ptr kn01_cpu_mask_nr_tbl[][2] __initdata = {
 		{ .p = cpu_all_int } },
 };
 
-void __init dec_init_kn01(void)
+static void __init dec_init_kn01(void)
 {
 	/* IRQ routing. */
 	memcpy(&dec_interrupt, &kn01_interrupt,
@@ -281,7 +302,7 @@ static int_ptr kn230_cpu_mask_nr_tbl[][2] __initdata = {
 		{ .p = cpu_all_int } },
 };
 
-void __init dec_init_kn230(void)
+static void __init dec_init_kn230(void)
 {
 	/* IRQ routing. */
 	memcpy(&dec_interrupt, &kn230_interrupt,
@@ -371,7 +392,7 @@ static int_ptr kn02_asic_mask_nr_tbl[][2] __initdata = {
 		{ .p = kn02_all_int } },
 };
 
-void __init dec_init_kn02(void)
+static void __init dec_init_kn02(void)
 {
 	/* IRQ routing. */
 	memcpy(&dec_interrupt, &kn02_interrupt,
@@ -472,7 +493,7 @@ static int_ptr kn02ba_asic_mask_nr_tbl[][2] __initdata = {
 		{ .p = asic_all_int } },
 };
 
-void __init dec_init_kn02ba(void)
+static void __init dec_init_kn02ba(void)
 {
 	/* IRQ routing. */
 	memcpy(&dec_interrupt, &kn02ba_interrupt,
@@ -569,7 +590,7 @@ static int_ptr kn02ca_asic_mask_nr_tbl[][2] __initdata = {
 		{ .p = asic_all_int } },
 };
 
-void __init dec_init_kn02ca(void)
+static void __init dec_init_kn02ca(void)
 {
 	/* IRQ routing. */
 	memcpy(&dec_interrupt, &kn02ca_interrupt,
@@ -670,7 +691,7 @@ static int_ptr kn03_asic_mask_nr_tbl[][2] __initdata = {
 		{ .p = asic_all_int } },
 };
 
-void __init dec_init_kn03(void)
+static void __init dec_init_kn03(void)
 {
 	/* IRQ routing. */
 	memcpy(&dec_interrupt, &kn03_interrupt,
@@ -744,7 +765,3 @@ void __init arch_init_irq(void)
 	if (dec_interrupt[DEC_IRQ_HALT] >= 0)
 		setup_irq(dec_interrupt[DEC_IRQ_HALT], &haltirq);
 }
-
-EXPORT_SYMBOL(ioasic_base);
-EXPORT_SYMBOL(dec_kn_slot_size);
-EXPORT_SYMBOL(dec_interrupt);
diff --git a/arch/mips/dec/time.c b/arch/mips/dec/time.c
index dc7091caa7aa..174822344131 100644
--- a/arch/mips/dec/time.c
+++ b/arch/mips/dec/time.c
@@ -37,10 +37,25 @@
 #include <asm/dec/machtype.h>
 
 
+/*
+ * Returns true if a clock update is in progress
+ */
+static inline unsigned char dec_rtc_is_updating(void)
+{
+	unsigned char uip;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rtc_lock, flags);
+	uip = (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP);
+	spin_unlock_irqrestore(&rtc_lock, flags);
+	return uip;
+}
+
 static unsigned long dec_rtc_get_time(void)
 {
 	unsigned int year, mon, day, hour, min, sec, real_year;
 	int i;
+	unsigned long flags;
 
 	/* The Linux interpretation of the DS1287 clock register contents:
 	 * When the Update-In-Progress (UIP) flag goes from 1 to 0, the
@@ -49,11 +64,12 @@ static unsigned long dec_rtc_get_time(void)
 	 */
 	/* read RTC exactly on falling edge of update flag */
 	for (i = 0; i < 1000000; i++)	/* may take up to 1 second... */
-		if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP)
+		if (dec_rtc_is_updating())
 			break;
 	for (i = 0; i < 1000000; i++)	/* must try at least 2.228 ms */
-		if (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP))
+		if (!dec_rtc_is_updating())
 			break;
+	spin_lock_irqsave(&rtc_lock, flags);
 	/* Isn't this overkill?  UIP above should guarantee consistency */
 	do {
 		sec = CMOS_READ(RTC_SECONDS);
@@ -77,6 +93,7 @@ static unsigned long dec_rtc_get_time(void)
 	 * of unused BBU RAM locations.
 	 */
 	real_year = CMOS_READ(RTC_DEC_YEAR);
+	spin_unlock_irqrestore(&rtc_lock, flags);
 	year += real_year - 72 + 2000;
 
 	return mktime(year, mon, day, hour, min, sec);
@@ -95,6 +112,8 @@ static int dec_rtc_set_mmss(unsigned long nowtime)
 	int real_seconds, real_minutes, cmos_minutes;
 	unsigned char save_control, save_freq_select;
 
+	/* irq are locally disabled here */
+	spin_lock(&rtc_lock);
 	/* tell the clock it's being set */
 	save_control = CMOS_READ(RTC_CONTROL);
 	CMOS_WRITE((save_control | RTC_SET), RTC_CONTROL);
@@ -141,6 +160,7 @@ static int dec_rtc_set_mmss(unsigned long nowtime)
 	 */
 	CMOS_WRITE(save_control, RTC_CONTROL);
 	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
+	spin_unlock(&rtc_lock);
 
 	return retval;
 }
diff --git a/arch/mips/defconfig b/arch/mips/defconfig
index 20f84b119b4c..2a1b844da43f 100644
--- a/arch/mips/defconfig
+++ b/arch/mips/defconfig
@@ -1,97 +1,76 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:48:59 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:05:49 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 CONFIG_SGI_IP22=y
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_ARC=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_SWAP_IO_SPACE=y
 CONFIG_ARC32=y
@@ -103,8 +82,10 @@ CONFIG_ARC_PROMLIB=y
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -120,84 +101,101 @@ CONFIG_CPU_R5000=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R4X00=y
+CONFIG_SYS_HAS_CPU_R5000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_BOARD_SCACHE=y
 CONFIG_IP22_CPU_SCACHE=y
+# CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
 
 #
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-# CONFIG_EISA is not set
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PC-card bridges
-#
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
+# Code maturity level options
 #
-# CONFIG_MTD is not set
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
-# Parallel port support
+# General setup
 #
-# CONFIG_PARPORT is not set
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
-# Plug and Play support
+# Loadable module support
 #
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
 
 #
-# Block devices
+# Block layer
 #
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
 
 #
 # IO Schedulers
@@ -206,69 +204,37 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=m
-# CONFIG_SCSI_FC_ATTRS is not set
-CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
 
 #
-# SCSI low-level drivers
-#
-CONFIG_SGIWD93_SCSI=y
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
-# CONFIG_MD is not set
+CONFIG_HW_HAS_EISA=y
+# CONFIG_EISA is not set
+CONFIG_MMU=y
 
 #
-# Fusion MPT device support
+# PCCARD (PCMCIA/CardBus) support
 #
+# CONFIG_PCCARD is not set
 
 #
-# IEEE 1394 (FireWire) support
+# PCI Hotplug Support
 #
 
 #
-# I2O device support
+# Executable file formats
 #
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+CONFIG_TRAD_SIGNALS=y
 
 #
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -277,12 +243,14 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
 CONFIG_NET_KEY=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 # CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
@@ -296,8 +264,10 @@ CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
 
 #
 # IP: Virtual Server Configuration
@@ -343,16 +313,27 @@ CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
 #
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
 # IP: Netfilter Configuration
 #
 CONFIG_IP_NF_CONNTRACK=m
 CONFIG_IP_NF_CT_ACCT=y
 CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
+CONFIG_IP_NF_CONNTRACK_NETLINK=m
 # CONFIG_IP_NF_CT_PROTO_SCTP is not set
 CONFIG_IP_NF_FTP=m
 CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_PPTP=m
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_LIMIT=m
@@ -376,14 +357,18 @@ CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_REALM=m
 CONFIG_IP_NF_MATCH_SCTP=m
+CONFIG_IP_NF_MATCH_DCCP=m
 CONFIG_IP_NF_MATCH_COMMENT=m
 CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -395,12 +380,14 @@ CONFIG_IP_NF_NAT_IRC=m
 CONFIG_IP_NF_NAT_FTP=m
 CONFIG_IP_NF_NAT_TFTP=m
 CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_NAT_PPTP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_DSCP=m
 CONFIG_IP_NF_TARGET_MARK=m
 CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_TARGET_CONNMARK=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
@@ -410,7 +397,7 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
 #
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
@@ -429,11 +416,17 @@ CONFIG_IP6_NF_MATCH_LENGTH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_NFQUEUE=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
 
 #
 # SCTP Configuration (EXPERIMENTAL)
@@ -464,6 +457,10 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_CLK_JIFFIES is not set
 CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
 # CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
@@ -476,37 +473,169 @@ CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
+
+#
+# Classification
+#
 CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
 CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
 CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
 # CONFIG_CLS_U32_PERF is not set
-# CONFIG_NET_CLS_IND is not set
 # CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_POLICE=y
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_ESTIMATOR=y
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_CHR_DEV_SG is not set
+CONFIG_CHR_DEV_SCH=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=m
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+
+#
+# SCSI low-level drivers
+#
+CONFIG_ISCSI_TCP=m
+CONFIG_SGIWD93_SCSI=y
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 CONFIG_EQUALIZER=m
 CONFIG_TUN=m
-CONFIG_ETHERTAP=m
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -540,6 +669,8 @@ CONFIG_SGISEEQ=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -569,18 +700,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
@@ -598,6 +717,16 @@ CONFIG_MOUSE_SERIAL=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -644,11 +773,16 @@ CONFIG_SGI_DS1286=m
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
 CONFIG_RAW_DRIVER=m
 CONFIG_MAX_RAW_DEVS=256
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -659,10 +793,20 @@ CONFIG_MAX_RAW_DEVS=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -693,7 +837,6 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 CONFIG_LOGO_SGI_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -707,7 +850,7 @@ CONFIG_LOGO_SGI_CLUT224=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
@@ -723,13 +866,17 @@ CONFIG_LOGO_SGI_CLUT224=y
 #
 # InfiniBand support
 #
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=m
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -741,12 +888,14 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
+CONFIG_XFS_EXPORT=y
 CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 # CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
 CONFIG_MINIX_FS=m
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 CONFIG_QUOTA=y
 # CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=m
@@ -754,6 +903,7 @@ CONFIG_QUOTACTL=y
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -781,12 +931,10 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -811,15 +959,20 @@ CONFIG_UFS_FS=m
 #
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
 # CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
 CONFIG_RPCSEC_GSS_KRB5=m
@@ -835,6 +988,7 @@ CONFIG_CIFS=m
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -908,7 +1062,9 @@ CONFIG_NLS_UTF8=m
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -931,6 +1087,7 @@ CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
@@ -942,10 +1099,10 @@ CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -955,9 +1112,12 @@ CONFIG_CRYPTO_TEST=m
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=m
 CONFIG_CRC32=m
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/mips/galileo-boards/ev96100/setup.c b/arch/mips/galileo-boards/ev96100/setup.c
index 28bd908c6d55..78dbb18edeb8 100644
--- a/arch/mips/galileo-boards/ev96100/setup.c
+++ b/arch/mips/galileo-boards/ev96100/setup.c
@@ -55,7 +55,7 @@ extern void mips_reboot_setup(void);
 
 unsigned char mac_0_1[12];
 
-static void __init ev96100_setup(void)
+void __init plat_setup(void)
 {
 	unsigned int config = read_c0_config();
 	unsigned int status = read_c0_status();
@@ -142,8 +142,6 @@ static void __init ev96100_setup(void)
 	tmp = GT_READ(GT_PCI0_CFGDATA_OFS);
 }
 
-early_initcall(ev96100_setup);
-
 unsigned short get_gt_devid(void)
 {
 	u32 gt_devid;
diff --git a/arch/mips/gt64120/ev64120/Kconfig b/arch/mips/gt64120/ev64120/Kconfig
new file mode 100644
index 000000000000..d691762cb0f7
--- /dev/null
+++ b/arch/mips/gt64120/ev64120/Kconfig
@@ -0,0 +1,3 @@
+config EVB_PCI1
+	bool "Enable Second PCI (PCI1)"
+	depends on MIPS_EV64120
diff --git a/arch/mips/gt64120/ev64120/setup.c b/arch/mips/gt64120/ev64120/setup.c
index dba0961400cc..98b5a96cc039 100644
--- a/arch/mips/gt64120/ev64120/setup.c
+++ b/arch/mips/gt64120/ev64120/setup.c
@@ -69,7 +69,7 @@ unsigned long __init prom_free_prom_memory(void)
  */
 extern void gt64120_time_init(void);
 
-static void __init ev64120_setup(void)
+void __init plat_setup(void)
 {
 	_machine_restart = galileo_machine_restart;
 	_machine_halt = galileo_machine_halt;
@@ -79,8 +79,6 @@ static void __init ev64120_setup(void)
 	set_io_port_base(KSEG1);
 }
 
-early_initcall(ev64120_setup);
-
 const char *get_system_type(void)
 {
 	return "Galileo EV64120A";
diff --git a/arch/mips/gt64120/momenco_ocelot/setup.c b/arch/mips/gt64120/momenco_ocelot/setup.c
index d610f8c17c81..0d07c33112d0 100644
--- a/arch/mips/gt64120/momenco_ocelot/setup.c
+++ b/arch/mips/gt64120/momenco_ocelot/setup.c
@@ -150,7 +150,7 @@ void PMON_v2_setup()
 	gt64120_base = 0xe0000000;
 }
 
-static void __init momenco_ocelot_setup(void)
+void __init plat_setup(void)
 {
 	void (*l3func)(unsigned long)=KSEG1ADDR(&setup_l3cache);
 	unsigned int tmpword;
@@ -307,8 +307,6 @@ static void __init momenco_ocelot_setup(void)
 	GT_WRITE(GT_DEV_B3_OFS, 0xfef73);
 }
 
-early_initcall(momenco_ocelot_setup);
-
 extern int rm7k_tcache_enabled;
 /*
  * This runs in KSEG1. See the verbiage in rm7k.c::probe_scache()
diff --git a/arch/mips/ite-boards/Kconfig b/arch/mips/ite-boards/Kconfig
new file mode 100644
index 000000000000..a6d59ad8f846
--- /dev/null
+++ b/arch/mips/ite-boards/Kconfig
@@ -0,0 +1,8 @@
+config IT8172_REVC
+	bool "Support for older IT8172 (Rev C)"
+	depends on MIPS_ITE8172
+	help
+	  Say Y here to support the older, Revision C version of the Integrated
+	  Technology Express, Inc. ITE8172 SBC.  Vendor page at
+	  <http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
+	  board at <http://www.mvista.com/partners/semiconductor/ite.html>.
diff --git a/arch/mips/ite-boards/generic/irq.c b/arch/mips/ite-boards/generic/irq.c
index cb71b9024d6f..e67f96129491 100644
--- a/arch/mips/ite-boards/generic/irq.c
+++ b/arch/mips/ite-boards/generic/irq.c
@@ -138,14 +138,13 @@ static void end_ite_irq(unsigned int irq)
 }
 
 static struct hw_interrupt_type it8172_irq_type = {
-	"ITE8172",
-	startup_ite_irq,
-	shutdown_ite_irq,
-	enable_it8172_irq,
-	disable_it8172_irq,
-	mask_and_ack_ite_irq,
-	end_ite_irq,
-	NULL
+	.typename = "ITE8172",
+	.startup = startup_ite_irq,
+	.shutdown = shutdown_ite_irq,
+	.enable = enable_it8172_irq,
+	.disable = disable_it8172_irq,
+	.ack = mask_and_ack_ite_irq,
+	.end = end_ite_irq,
 };
 
 
@@ -159,13 +158,13 @@ static void ack_none(unsigned int irq) { }
 #define end_none	enable_none
 
 static struct hw_interrupt_type cp0_irq_type = {
-	"CP0 Count",
-	startup_none,
-	shutdown_none,
-	enable_none,
-	disable_none,
-	ack_none,
-	end_none
+	.typename = "CP0 Count",
+	.startup = startup_none,
+	.shutdown = shutdown_none,
+	.enable = enable_none,
+	.disable = disable_none,
+	.ack = ack_none,
+	.end = end_none
 };
 
 void enable_cpu_timer(void)
@@ -182,7 +181,6 @@ void __init arch_init_irq(void)
 	int i;
         unsigned long flags;
 
-        memset(irq_desc, 0, sizeof(irq_desc));
         set_except_vector(0, it8172_IRQ);
 
 	/* mask all interrupts */
diff --git a/arch/mips/ite-boards/generic/it8172_setup.c b/arch/mips/ite-boards/generic/it8172_setup.c
index a5f6d84bc181..062429dd7ca0 100644
--- a/arch/mips/ite-boards/generic/it8172_setup.c
+++ b/arch/mips/ite-boards/generic/it8172_setup.c
@@ -105,7 +105,7 @@ void __init it8172_init_ram_resource(unsigned long memsize)
 	it8172_resources.ram.end = memsize;
 }
 
-static void __init it8172_setup(void)
+void __init plat_setup(void)
 {
 	unsigned short dsr;
 	char *argptr;
@@ -251,8 +251,6 @@ static void __init it8172_setup(void)
 #endif /* CONFIG_IT8172_SCR1 */
 }
 
-early_initcall(it8172_setup);
-
 #ifdef CONFIG_SERIO_I8042
 /*
  * According to the ITE Special BIOS Note for waking up the
diff --git a/arch/mips/jazz/Kconfig b/arch/mips/jazz/Kconfig
new file mode 100644
index 000000000000..1f372b0d2559
--- /dev/null
+++ b/arch/mips/jazz/Kconfig
@@ -0,0 +1,33 @@
+config ACER_PICA_61
+	bool "Support for Acer PICA 1 chipset (EXPERIMENTAL)"
+	depends on MACH_JAZZ && EXPERIMENTAL
+	select DMA_NONCOHERENT
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	help
+	  This is a machine with a R4400 133/150 MHz CPU. To compile a Linux
+	  kernel that runs on these, say Y here. For details about Linux on
+	  the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
+	  <http://www.linux-mips.org/>.
+
+config MIPS_MAGNUM_4000
+	bool "Support for MIPS Magnum 4000"
+	depends on MACH_JAZZ
+	select DMA_NONCOHERENT
+	select SYS_SUPPORTS_BIG_ENDIAN if EXPERIMENTAL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	help
+	  This is a machine with a R4000 100 MHz CPU. To compile a Linux
+	  kernel that runs on these, say Y here. For details about Linux on
+	  the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
+	  <http://www.linux-mips.org/>.
+
+config OLIVETTI_M700
+	bool "Support for Olivetti M700-10"
+	depends on MACH_JAZZ
+	select DMA_NONCOHERENT
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	help
+	  This is a machine with a R4000 100 MHz CPU. To compile a Linux
+	  kernel that runs on these, say Y here. For details about Linux on
+	  the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
+	  <http://www.linux-mips.org/>.
diff --git a/arch/mips/jazz/irq.c b/arch/mips/jazz/irq.c
index 0b608fa98d5a..b309b1bcf2e8 100644
--- a/arch/mips/jazz/irq.c
+++ b/arch/mips/jazz/irq.c
@@ -58,14 +58,13 @@ static void end_r4030_irq(unsigned int irq)
 }
 
 static struct hw_interrupt_type r4030_irq_type = {
-	"R4030",
-	startup_r4030_irq,
-	shutdown_r4030_irq,
-	enable_r4030_irq,
-	disable_r4030_irq,
-	mask_and_ack_r4030_irq,
-	end_r4030_irq,
-	NULL
+	.typename = "R4030",
+	.startup = startup_r4030_irq,
+	.shutdown = shutdown_r4030_irq,
+	.enable = enable_r4030_irq,
+	.disable = disable_r4030_irq,
+	.ack = mask_and_ack_r4030_irq,
+	.end = end_r4030_irq,
 };
 
 void __init init_r4030_ints(void)
diff --git a/arch/mips/jazz/setup.c b/arch/mips/jazz/setup.c
index fccb06fe209d..044df9d4ab7c 100644
--- a/arch/mips/jazz/setup.c
+++ b/arch/mips/jazz/setup.c
@@ -50,7 +50,7 @@ static struct resource jazz_io_resources[] = {
 	{ "dma2", 0xc0, 0xdf, IORESOURCE_BUSY },
 };
 
-static void __init jazz_setup(void)
+void __init plat_setup(void)
 {
 	int i;
 
@@ -97,5 +97,3 @@ static void __init jazz_setup(void)
 
 	vdma_init();
 }
-
-early_initcall(jazz_setup);
diff --git a/arch/mips/jmr3927/common/rtc_ds1742.c b/arch/mips/jmr3927/common/rtc_ds1742.c
index 1ae4318e1358..9a8bff153d80 100644
--- a/arch/mips/jmr3927/common/rtc_ds1742.c
+++ b/arch/mips/jmr3927/common/rtc_ds1742.c
@@ -41,11 +41,11 @@
 #include <linux/types.h>
 #include <linux/time.h>
 #include <linux/rtc.h>
+#include <linux/ds1742rtc.h>
 
 #include <asm/time.h>
 #include <asm/addrspace.h>
 
-#include <asm/jmr3927/ds1742rtc.h>
 #include <asm/debug.h>
 
 #define	EPOCH		2000
@@ -57,7 +57,9 @@ rtc_ds1742_get_time(void)
 {
 	unsigned int year, month, day, hour, minute, second;
 	unsigned int century;
+	unsigned long flags;
 
+	spin_lock_irqsave(&rtc_lock, flags);
 	CMOS_WRITE(RTC_READ, RTC_CONTROL);
 	second = BCD2BIN(CMOS_READ(RTC_SECONDS) & RTC_SECONDS_MASK);
 	minute = BCD2BIN(CMOS_READ(RTC_MINUTES));
@@ -67,6 +69,7 @@ rtc_ds1742_get_time(void)
 	year = BCD2BIN(CMOS_READ(RTC_YEAR));
 	century = BCD2BIN(CMOS_READ(RTC_CENTURY) & RTC_CENTURY_MASK);
 	CMOS_WRITE(0, RTC_CONTROL);
+	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	year += century * 100;
 
@@ -81,7 +84,9 @@ rtc_ds1742_set_time(unsigned long t)
 	u8 year, month, day, hour, minute, second;
 	u8 cmos_year, cmos_month, cmos_day, cmos_hour, cmos_minute, cmos_second;
 	int cmos_century;
+	unsigned long flags;
 
+	spin_lock_irqsave(&rtc_lock, flags);
 	CMOS_WRITE(RTC_READ, RTC_CONTROL);
 	cmos_second = (u8)(CMOS_READ(RTC_SECONDS) & RTC_SECONDS_MASK);
 	cmos_minute = (u8)CMOS_READ(RTC_MINUTES);
@@ -139,6 +144,7 @@ rtc_ds1742_set_time(unsigned long t)
 
 	/* RTC_CENTURY and RTC_CONTROL share same address... */
 	CMOS_WRITE(cmos_century, RTC_CONTROL);
+	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	return 0;
 }
diff --git a/arch/mips/jmr3927/rbhma3100/irq.c b/arch/mips/jmr3927/rbhma3100/irq.c
index b9799b86fc79..2810727f1d4e 100644
--- a/arch/mips/jmr3927/rbhma3100/irq.c
+++ b/arch/mips/jmr3927/rbhma3100/irq.c
@@ -113,7 +113,8 @@ static void jmr3927_irq_ack(unsigned int irq)
 
 static void jmr3927_irq_end(unsigned int irq)
 {
-	jmr3927_irq_enable(irq);
+	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+		jmr3927_irq_enable(irq);
 }
 
 static void jmr3927_irq_disable(unsigned int irq_nr)
@@ -121,7 +122,7 @@ static void jmr3927_irq_disable(unsigned int irq_nr)
 	struct tb_irq_space* sp;
 	unsigned long flags;
 
-	spinlock_irqsave(&jmr3927_irq_lock, flags);
+	spin_lock_irqsave(&jmr3927_irq_lock, flags);
 	for (sp = tb_irq_spaces; sp; sp = sp->next) {
 		if (sp->start_irqno <= irq_nr &&
 		    irq_nr < sp->start_irqno + sp->nr_irqs) {
@@ -131,7 +132,7 @@ static void jmr3927_irq_disable(unsigned int irq_nr)
 			break;
 		}
 	}
-	spinlock_irqrestore(&jmr3927_irq_lock, flags);
+	spin_unlock_irqrestore(&jmr3927_irq_lock, flags);
 }
 
 static void jmr3927_irq_enable(unsigned int irq_nr)
@@ -139,7 +140,7 @@ static void jmr3927_irq_enable(unsigned int irq_nr)
 	struct tb_irq_space* sp;
 	unsigned long flags;
 
-	spinlock_irqsave(&jmr3927_irq_lock, flags);
+	spin_lock_irqsave(&jmr3927_irq_lock, flags);
 	for (sp = tb_irq_spaces; sp; sp = sp->next) {
 		if (sp->start_irqno <= irq_nr &&
 		    irq_nr < sp->start_irqno + sp->nr_irqs) {
@@ -149,7 +150,7 @@ static void jmr3927_irq_enable(unsigned int irq_nr)
 			break;
 		}
 	}
-	spinlock_irqrestore(&jmr3927_irq_lock, flags);
+	spin_unlock_irqrestore(&jmr3927_irq_lock, flags);
 }
 
 /*
@@ -205,7 +206,10 @@ static void mask_irq_irc(int irq_nr, int space_id)
 	/* update IRCSR */
 	tx3927_ircptr->imr = 0;
 	tx3927_ircptr->imr = irc_elevel;
+	/* flush write buffer */
+	(void)tx3927_ircptr->ssr;
 }
+
 static void unmask_irq_irc(int irq_nr, int space_id)
 {
 	volatile unsigned long *ilrp = &tx3927_ircptr->ilr[irq_nr / 2];
@@ -276,7 +280,7 @@ void jmr3927_irc_irqdispatch(struct pt_regs *regs)
 	do_IRQ(irq + JMR3927_IRQ_IRC, regs);
 }
 
-static void jmr3927_ioc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t jmr3927_ioc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
 	unsigned char istat = jmr3927_ioc_reg_in(JMR3927_IOC_INTS2_ADDR);
 	int i;
@@ -287,13 +291,14 @@ static void jmr3927_ioc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 			do_IRQ(irq, regs);
 		}
 	}
+	return IRQ_HANDLED;
 }
 
 static struct irqaction ioc_action = {
 	jmr3927_ioc_interrupt, 0, CPU_MASK_NONE, "IOC", NULL, NULL,
 };
 
-static void jmr3927_isac_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t jmr3927_isac_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
 	unsigned char istat = jmr3927_isac_reg_in(JMR3927_ISAC_INTS2_ADDR);
 	int i;
@@ -304,6 +309,7 @@ static void jmr3927_isac_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 			do_IRQ(irq, regs);
 		}
 	}
+	return IRQ_HANDLED;
 }
 
 static struct irqaction isac_action = {
@@ -311,19 +317,23 @@ static struct irqaction isac_action = {
 };
 
 
-static void jmr3927_isaerr_interrupt(int irq, void * dev_id, struct pt_regs * regs)
+static irqreturn_t jmr3927_isaerr_interrupt(int irq, void * dev_id, struct pt_regs * regs)
 {
 	printk(KERN_WARNING "ISA error interrupt (irq 0x%x).\n", irq);
+
+	return IRQ_HANDLED;
 }
 static struct irqaction isaerr_action = {
 	jmr3927_isaerr_interrupt, 0, CPU_MASK_NONE, "ISA error", NULL, NULL,
 };
 
-static void jmr3927_pcierr_interrupt(int irq, void * dev_id, struct pt_regs * regs)
+static irqreturn_t jmr3927_pcierr_interrupt(int irq, void * dev_id, struct pt_regs * regs)
 {
 	printk(KERN_WARNING "PCI error interrupt (irq 0x%x).\n", irq);
 	printk(KERN_WARNING "pcistat:%02x, lbstat:%04lx\n",
 	       tx3927_pcicptr->pcistat, tx3927_pcicptr->lbstat);
+
+	return IRQ_HANDLED;
 }
 static struct irqaction pcierr_action = {
 	jmr3927_pcierr_interrupt, 0, CPU_MASK_NONE, "PCI error", NULL, NULL,
@@ -412,13 +422,13 @@ void __init arch_init_irq(void)
 }
 
 static hw_irq_controller jmr3927_irq_controller = {
-	"jmr3927_irq",
-	jmr3927_irq_startup,
-	jmr3927_irq_shutdown,
-	jmr3927_irq_enable,
-	jmr3927_irq_disable,
-	jmr3927_irq_ack,
-	jmr3927_irq_end,
+	.typename = "jmr3927_irq",
+	.startup = jmr3927_irq_startup,
+	.shutdown = jmr3927_irq_shutdown,
+	.enable = jmr3927_irq_enable,
+	.disable = jmr3927_irq_disable,
+	.ack = jmr3927_irq_ack,
+	.end = jmr3927_irq_end,
 };
 
 void jmr3927_irq_init(u32 irq_base)
diff --git a/arch/mips/jmr3927/rbhma3100/setup.c b/arch/mips/jmr3927/rbhma3100/setup.c
index 32039bb2f440..4763957df8fc 100644
--- a/arch/mips/jmr3927/rbhma3100/setup.c
+++ b/arch/mips/jmr3927/rbhma3100/setup.c
@@ -44,6 +44,11 @@
 #include <linux/ioport.h>
 #include <linux/param.h>	/* for HZ */
 #include <linux/delay.h>
+#ifdef CONFIG_SERIAL_TXX9
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#endif
 
 #include <asm/addrspace.h>
 #include <asm/time.h>
@@ -55,6 +60,8 @@
 #include <asm/mipsregs.h>
 #include <asm/traps.h>
 
+extern void puts(unsigned char *cp);
+
 /* Tick Timer divider */
 #define JMR3927_TIMER_CCD	0	/* 1/2 */
 #define JMR3927_TIMER_CLK	(JMR3927_IMCLK / (2 << JMR3927_TIMER_CCD))
@@ -193,7 +200,7 @@ static void jmr3927_board_init(void);
 extern struct resource pci_io_resource;
 extern struct resource pci_mem_resource;
 
-static void __init jmr3927_setup(void)
+void __init plat_setup(void)
 {
 	char *argptr;
 
@@ -211,8 +218,8 @@ static void __init jmr3927_setup(void)
 	 */
 	ioport_resource.start = pci_io_resource.start;
 	ioport_resource.end = pci_io_resource.end;
-	iomem_resource.start = pci_mem_resource.start;
-	iomem_resource.end = pci_mem_resource.end;
+	iomem_resource.start = 0;
+	iomem_resource.end = 0xffffffff;
 
 	/* Reboot on panic */
 	panic_timeout = 180;
@@ -265,18 +272,35 @@ static void __init jmr3927_setup(void)
 		strcat(argptr, " ip=bootp");
 	}
 
-#ifdef CONFIG_TXX927_SERIAL_CONSOLE
+#ifdef CONFIG_SERIAL_TXX9
+	{
+		extern int early_serial_txx9_setup(struct uart_port *port);
+		int i;
+		struct uart_port req;
+		for(i = 0; i < 2; i++) {
+			memset(&req, 0, sizeof(req));
+			req.line = i;
+			req.iotype = UPIO_MEM;
+			req.membase = (char *)TX3927_SIO_REG(i);
+			req.mapbase = TX3927_SIO_REG(i);
+			req.irq = i == 0 ?
+				JMR3927_IRQ_IRC_SIO0 : JMR3927_IRQ_IRC_SIO1;
+			if (i == 0)
+				req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
+			req.uartclk = JMR3927_IMCLK;
+			early_serial_txx9_setup(&req);
+		}
+	}
+#ifdef CONFIG_SERIAL_TXX9_CONSOLE
 	argptr = prom_getcmdline();
 	if ((argptr = strstr(argptr, "console=")) == NULL) {
 		argptr = prom_getcmdline();
 		strcat(argptr, " console=ttyS1,115200");
 	}
 #endif
+#endif
 }
 
-early_initcall(jmr3927_setup);
-
-
 static void tx3927_setup(void);
 
 #ifdef CONFIG_PCI
@@ -335,7 +359,7 @@ static void __init jmr3927_board_init(void)
 		       jmr3927_io_dipsw());
 }
 
-static void __init tx3927_setup(void)
+void __init tx3927_setup(void)
 {
 	int i;
 
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index d3303584fbd1..72f2126ad19d 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -11,11 +11,7 @@ obj-y		+= cpu-probe.o branch.o entry.o genex.o irq.o process.o \
 binfmt_irix-objs	:= irixelf.o irixinv.o irixioctl.o irixsig.o	\
 			   irix5sys.o sysirix.o
 
-ifdef CONFIG_MODULES
-obj-y				+= mips_ksyms.o module.o
-obj-$(CONFIG_32BIT)		+= module-elf32.o
-obj-$(CONFIG_64BIT)		+= module-elf64.o
-endif
+obj-$(CONFIG_MODULES)		+= mips_ksyms.o module.o
 
 obj-$(CONFIG_CPU_R3000)		+= r2300_fpu.o r2300_switch.o
 obj-$(CONFIG_CPU_TX39XX)	+= r2300_fpu.o r2300_switch.o
@@ -38,12 +34,18 @@ obj-$(CONFIG_CPU_R6000)		+= r6000_fpu.o r4k_switch.o
 
 obj-$(CONFIG_SMP)		+= smp.o
 
+obj-$(CONFIG_MIPS_MT_SMP)	+= smp_mt.o
+
+obj-$(CONFIG_MIPS_VPE_LOADER)	+= vpe.o
+obj-$(CONFIG_MIPS_VPE_APSP_API)	+= rtlx.o
+
 obj-$(CONFIG_NO_ISA)		+= dma-no-isa.o
 obj-$(CONFIG_I8259)		+= i8259.o
 obj-$(CONFIG_IRQ_CPU)		+= irq_cpu.o
 obj-$(CONFIG_IRQ_CPU_RM7K)	+= irq-rm7000.o
 obj-$(CONFIG_IRQ_CPU_RM9K)	+= irq-rm9000.o
 obj-$(CONFIG_IRQ_MV64340)	+= irq-mv6434x.o
+obj-$(CONFIG_MIPS_BOARDS_GEN)	+= irq-msc01.o
 
 obj-$(CONFIG_32BIT)		+= scall32-o32.o
 obj-$(CONFIG_64BIT)		+= scall64-64.o
@@ -57,8 +59,6 @@ obj-$(CONFIG_PROC_FS)		+= proc.o
 
 obj-$(CONFIG_64BIT)		+= cpu-bugs64.o
 
-obj-$(CONFIG_GEN_RTC)		+= genrtc.o
-
 CFLAGS_cpu-bugs64.o	= $(shell if $(CC) $(CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)
 CFLAGS_ioctl32.o	+= -Ifs/
 
diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c
index 2c11abb5a406..ca6b03c773be 100644
--- a/arch/mips/kernel/asm-offsets.c
+++ b/arch/mips/kernel/asm-offsets.c
@@ -95,6 +95,7 @@ void output_thread_info_defines(void)
 	offset("#define TI_PRE_COUNT       ", struct thread_info, preempt_count);
 	offset("#define TI_ADDR_LIMIT      ", struct thread_info, addr_limit);
 	offset("#define TI_RESTART_BLOCK   ", struct thread_info, restart_block);
+	offset("#define TI_TP_VALUE	   ", struct thread_info, tp_value);
 	constant("#define _THREAD_SIZE_ORDER ", THREAD_SIZE_ORDER);
 	constant("#define _THREAD_SIZE       ", THREAD_SIZE);
 	constant("#define _THREAD_MASK       ", THREAD_MASK);
@@ -240,6 +241,7 @@ void output_mm_defines(void)
 	linefeed;
 }
 
+#ifdef CONFIG_32BIT
 void output_sc_defines(void)
 {
 	text("/* Linux sigcontext offsets. */");
@@ -251,10 +253,29 @@ void output_sc_defines(void)
 	offset("#define SC_STATUS     ", struct sigcontext, sc_status);
 	offset("#define SC_FPC_CSR    ", struct sigcontext, sc_fpc_csr);
 	offset("#define SC_FPC_EIR    ", struct sigcontext, sc_fpc_eir);
-	offset("#define SC_CAUSE      ", struct sigcontext, sc_cause);
-	offset("#define SC_BADVADDR   ", struct sigcontext, sc_badvaddr);
+	offset("#define SC_HI1        ", struct sigcontext, sc_hi1);
+	offset("#define SC_LO1        ", struct sigcontext, sc_lo1);
+	offset("#define SC_HI2        ", struct sigcontext, sc_hi2);
+	offset("#define SC_LO2        ", struct sigcontext, sc_lo2);
+	offset("#define SC_HI3        ", struct sigcontext, sc_hi3);
+	offset("#define SC_LO3        ", struct sigcontext, sc_lo3);
 	linefeed;
 }
+#endif
+
+#ifdef CONFIG_64BIT
+void output_sc_defines(void)
+{
+	text("/* Linux sigcontext offsets. */");
+	offset("#define SC_REGS       ", struct sigcontext, sc_regs);
+	offset("#define SC_FPREGS     ", struct sigcontext, sc_fpregs);
+	offset("#define SC_MDHI       ", struct sigcontext, sc_hi);
+	offset("#define SC_MDLO       ", struct sigcontext, sc_lo);
+	offset("#define SC_PC         ", struct sigcontext, sc_pc);
+	offset("#define SC_FPC_CSR    ", struct sigcontext, sc_fpc_csr);
+	linefeed;
+}
+#endif
 
 #ifdef CONFIG_MIPS32_COMPAT
 void output_sc32_defines(void)
diff --git a/arch/mips/kernel/binfmt_elfn32.c b/arch/mips/kernel/binfmt_elfn32.c
index 6b645fbb1ddc..d8e2674a1543 100644
--- a/arch/mips/kernel/binfmt_elfn32.c
+++ b/arch/mips/kernel/binfmt_elfn32.c
@@ -52,7 +52,6 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
 
 #include <asm/processor.h>
 #include <linux/module.h>
-#include <linux/config.h>
 #include <linux/elfcore.h>
 #include <linux/compat.h>
 
@@ -116,4 +115,7 @@ MODULE_AUTHOR("Ralf Baechle (ralf@linux-mips.org)");
 #undef MODULE_DESCRIPTION
 #undef MODULE_AUTHOR
 
+#undef TASK_SIZE
+#define TASK_SIZE TASK_SIZE32
+
 #include "../../../fs/binfmt_elf.c"
diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c
index b4075e99c452..cec5f327e360 100644
--- a/arch/mips/kernel/binfmt_elfo32.c
+++ b/arch/mips/kernel/binfmt_elfo32.c
@@ -54,7 +54,6 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
 
 #include <asm/processor.h>
 #include <linux/module.h>
-#include <linux/config.h>
 #include <linux/elfcore.h>
 #include <linux/compat.h>
 
@@ -98,7 +97,7 @@ struct elf_prpsinfo32
 #define init_elf_binfmt init_elf32_binfmt
 
 #define jiffies_to_timeval jiffies_to_compat_timeval
-static __inline__ void
+static inline void
 jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value)
 {
 	/*
@@ -113,21 +112,26 @@ jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value)
 #undef ELF_CORE_COPY_REGS
 #define ELF_CORE_COPY_REGS(_dest,_regs) elf32_core_copy_regs(_dest,_regs);
 
-void elf32_core_copy_regs(elf_gregset_t _dest, struct pt_regs *_regs)
+void elf32_core_copy_regs(elf_gregset_t grp, struct pt_regs *regs)
 {
 	int i;
 
-	memset(_dest, 0, sizeof(elf_gregset_t));
-
-	/* XXXKW the 6 is from EF_REG0 in gdb/gdb/mips-linux-tdep.c, include/asm-mips/reg.h */
-	for (i=6; i<38; i++)
-		_dest[i] = (elf_greg_t) _regs->regs[i-6];
-	_dest[i++] = (elf_greg_t) _regs->lo;
-	_dest[i++] = (elf_greg_t) _regs->hi;
-	_dest[i++] = (elf_greg_t) _regs->cp0_epc;
-	_dest[i++] = (elf_greg_t) _regs->cp0_badvaddr;
-	_dest[i++] = (elf_greg_t) _regs->cp0_status;
-	_dest[i++] = (elf_greg_t) _regs->cp0_cause;
+	for (i = 0; i < EF_R0; i++)
+		grp[i] = 0;
+	grp[EF_R0] = 0;
+	for (i = 1; i <= 31; i++)
+		grp[EF_R0 + i] = (elf_greg_t) regs->regs[i];
+	grp[EF_R26] = 0;
+	grp[EF_R27] = 0;
+	grp[EF_LO] = (elf_greg_t) regs->lo;
+	grp[EF_HI] = (elf_greg_t) regs->hi;
+	grp[EF_CP0_EPC] = (elf_greg_t) regs->cp0_epc;
+	grp[EF_CP0_BADVADDR] = (elf_greg_t) regs->cp0_badvaddr;
+	grp[EF_CP0_STATUS] = (elf_greg_t) regs->cp0_status;
+	grp[EF_CP0_CAUSE] = (elf_greg_t) regs->cp0_cause;
+#ifdef EF_UNUSED0
+	grp[EF_UNUSED0] = 0;
+#endif
 }
 
 MODULE_DESCRIPTION("Binary format loader for compatibility with o32 Linux/MIPS binaries");
@@ -136,4 +140,7 @@ MODULE_AUTHOR("Ralf Baechle (ralf@linux-mips.org)");
 #undef MODULE_DESCRIPTION
 #undef MODULE_AUTHOR
 
+#undef TASK_SIZE
+#define TASK_SIZE TASK_SIZE32
+
 #include "../../../fs/binfmt_elf.c"
diff --git a/arch/mips/kernel/branch.c b/arch/mips/kernel/branch.c
index 01117e977a7f..374de839558d 100644
--- a/arch/mips/kernel/branch.c
+++ b/arch/mips/kernel/branch.c
@@ -12,6 +12,7 @@
 #include <asm/branch.h>
 #include <asm/cpu.h>
 #include <asm/cpu-features.h>
+#include <asm/fpu.h>
 #include <asm/inst.h>
 #include <asm/ptrace.h>
 #include <asm/uaccess.h>
@@ -21,7 +22,7 @@
  */
 int __compute_return_epc(struct pt_regs *regs)
 {
-	unsigned int *addr, bit, fcr31;
+	unsigned int *addr, bit, fcr31, dspcontrol;
 	long epc;
 	union mips_instruction insn;
 
@@ -98,6 +99,18 @@ int __compute_return_epc(struct pt_regs *regs)
 				epc += 8;
 			regs->cp0_epc = epc;
 			break;
+		case bposge32_op:
+			if (!cpu_has_dsp)
+				goto sigill;
+
+			dspcontrol = rddsp(0x01);
+
+			if (dspcontrol >= 32) {
+				epc = epc + 4 + (insn.i_format.simmediate << 2);
+			} else
+				epc += 8;
+			regs->cp0_epc = epc;
+			break;
 		}
 		break;
 
@@ -161,10 +174,13 @@ int __compute_return_epc(struct pt_regs *regs)
 	 * And now the FPA/cp1 branch instructions.
 	 */
 	case cop1_op:
-		if (!cpu_has_fpu)
-			fcr31 = current->thread.fpu.soft.fcr31;
-		else
+		preempt_disable();
+		if (is_fpu_owner())
 			asm volatile("cfc1\t%0,$31" : "=r" (fcr31));
+		else
+			fcr31 = current->thread.fpu.hard.fcr31;
+		preempt_enable();
+
 		bit = (insn.i_format.rt >> 2);
 		bit += (bit != 0);
 		bit += 23;
@@ -196,4 +212,9 @@ unaligned:
 	printk("%s: unaligned epc - sending SIGBUS.\n", current->comm);
 	force_sig(SIGBUS, current);
 	return -EFAULT;
+
+sigill:
+	printk("%s: DSP branch but not DSP ASE - sending SIGBUS.\n", current->comm);
+	force_sig(SIGBUS, current);
+	return -EFAULT;
 }
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 7685f8baf3f0..5e1b08b00a33 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -2,9 +2,9 @@
  * Processor capabilities determination functions.
  *
  * Copyright (C) xxxx  the Anonymous
- * Copyright (C) 2003  Maciej W. Rozycki
+ * Copyright (C) 2003, 2004  Maciej W. Rozycki
  * Copyright (C) 1994 - 2003 Ralf Baechle
- * Copyright (C) 2001 MIPS Inc.
+ * Copyright (C) 2001, 2004  MIPS Inc.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -17,7 +17,6 @@
 #include <linux/ptrace.h>
 #include <linux/stddef.h>
 
-#include <asm/bugs.h>
 #include <asm/cpu.h>
 #include <asm/fpu.h>
 #include <asm/mipsregs.h>
@@ -51,36 +50,48 @@ static void r4k_wait(void)
 		".set\tmips0");
 }
 
-/*
- * The Au1xxx wait is available only if we run CONFIG_PM and
- * the timer setup found we had a 32KHz counter available.
- * There are still problems with functions that may call au1k_wait
- * directly, but that will be discovered pretty quickly.
- */
-extern void (*au1k_wait_ptr)(void);
+/* The Au1xxx wait is available only if using 32khz counter or
+ * external timer source, but specifically not CP0 Counter. */
+int allow_au1k_wait;
 
-void au1k_wait(void)
+static void au1k_wait(void)
 {
-#ifdef CONFIG_PM
 	/* using the wait instruction makes CP0 counter unusable */
-	__asm__(".set\tmips3\n\t"
+	__asm__(".set mips3\n\t"
+		"cache 0x14, 0(%0)\n\t"
+		"cache 0x14, 32(%0)\n\t"
+		"sync\n\t"
+		"nop\n\t"
 		"wait\n\t"
 		"nop\n\t"
 		"nop\n\t"
 		"nop\n\t"
 		"nop\n\t"
-		".set\tmips0");
-#else
-	__asm__("nop\n\t"
-		"nop");
-#endif
+		".set mips0\n\t"
+		: : "r" (au1k_wait));
+}
+
+static int __initdata nowait = 0;
+
+int __init wait_disable(char *s)
+{
+	nowait = 1;
+
+	return 1;
 }
 
+__setup("nowait", wait_disable);
+
 static inline void check_wait(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
 
 	printk("Checking for 'wait' instruction... ");
+	if (nowait) {
+		printk (" disabled.\n");
+		return;
+	}
+
 	switch (c->cputype) {
 	case CPU_R3081:
 	case CPU_R3081E:
@@ -109,22 +120,22 @@ static inline void check_wait(void)
 /*	case CPU_20KC:*/
 	case CPU_24K:
 	case CPU_25KF:
+	case CPU_34K:
+ 	case CPU_PR4450:
 		cpu_wait = r4k_wait;
 		printk(" available.\n");
 		break;
-#ifdef CONFIG_PM
 	case CPU_AU1000:
 	case CPU_AU1100:
 	case CPU_AU1500:
-		if (au1k_wait_ptr != NULL) {
-			cpu_wait = au1k_wait_ptr;
+	case CPU_AU1550:
+	case CPU_AU1200:
+		if (allow_au1k_wait) {
+			cpu_wait = au1k_wait;
 			printk(" available.\n");
-		}
-		else {
+		} else
 			printk(" unavailable.\n");
-		}
 		break;
-#endif
 	default:
 		printk(" unavailable.\n");
 		break;
@@ -180,7 +191,7 @@ static inline int __cpu_has_fpu(void)
 	return ((cpu_get_fpu_id() & 0xff00) != FPIR_IMP_NONE);
 }
 
-#define R4K_OPTS (MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_4KTLB \
+#define R4K_OPTS (MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE \
 		| MIPS_CPU_COUNTER)
 
 static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
@@ -189,7 +200,8 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
 	case PRID_IMP_R2000:
 		c->cputype = CPU_R2000;
 		c->isa_level = MIPS_CPU_ISA_I;
-		c->options = MIPS_CPU_TLB | MIPS_CPU_NOFPUEX;
+		c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
+		             MIPS_CPU_NOFPUEX;
 		if (__cpu_has_fpu())
 			c->options |= MIPS_CPU_FPU;
 		c->tlbsize = 64;
@@ -203,7 +215,8 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
 		else
 			c->cputype = CPU_R3000;
 		c->isa_level = MIPS_CPU_ISA_I;
-		c->options = MIPS_CPU_TLB | MIPS_CPU_NOFPUEX;
+		c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
+		             MIPS_CPU_NOFPUEX;
 		if (__cpu_has_fpu())
 			c->options |= MIPS_CPU_FPU;
 		c->tlbsize = 64;
@@ -266,7 +279,8 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
 	case PRID_IMP_R4600:
 		c->cputype = CPU_R4600;
 		c->isa_level = MIPS_CPU_ISA_III;
-		c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_LLSC;
+		c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
+			     MIPS_CPU_LLSC;
 		c->tlbsize = 48;
 		break;
 	#if 0
@@ -285,7 +299,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
 	#endif
 	case PRID_IMP_TX39:
 		c->isa_level = MIPS_CPU_ISA_I;
-		c->options = MIPS_CPU_TLB;
+		c->options = MIPS_CPU_TLB | MIPS_CPU_TX39_CACHE;
 
 		if ((c->processor_id & 0xf0) == (PRID_REV_TX3927 & 0xf0)) {
 			c->cputype = CPU_TX3927;
@@ -403,7 +417,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
 	case PRID_IMP_R10000:
 		c->cputype = CPU_R10000;
 		c->isa_level = MIPS_CPU_ISA_IV;
-		c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
+		c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
 		             MIPS_CPU_FPU | MIPS_CPU_32FPR |
 			     MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
 		             MIPS_CPU_LLSC;
@@ -412,7 +426,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
 	case PRID_IMP_R12000:
 		c->cputype = CPU_R12000;
 		c->isa_level = MIPS_CPU_ISA_IV;
-		c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
+		c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
 		             MIPS_CPU_FPU | MIPS_CPU_32FPR |
 			     MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
 		             MIPS_CPU_LLSC;
@@ -421,74 +435,147 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
 	}
 }
 
-static inline void decode_config1(struct cpuinfo_mips *c)
+static inline unsigned int decode_config0(struct cpuinfo_mips *c)
 {
-	unsigned long config0 = read_c0_config();
-	unsigned long config1;
+	unsigned int config0;
+	int isa;
 
-	if ((config0 & (1 << 31)) == 0)
-		return;			/* actually wort a panic() */
+	config0 = read_c0_config();
+
+	if (((config0 & MIPS_CONF_MT) >> 7) == 1)
+		c->options |= MIPS_CPU_TLB;
+	isa = (config0 & MIPS_CONF_AT) >> 13;
+	switch (isa) {
+	case 0:
+		c->isa_level = MIPS_CPU_ISA_M32;
+		break;
+	case 2:
+		c->isa_level = MIPS_CPU_ISA_M64;
+		break;
+	default:
+		panic("Unsupported ISA type, cp0.config0.at: %d.", isa);
+	}
+
+	return config0 & MIPS_CONF_M;
+}
+
+static inline unsigned int decode_config1(struct cpuinfo_mips *c)
+{
+	unsigned int config1;
 
-	/* MIPS32 or MIPS64 compliant CPU. Read Config 1 register. */
-	c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
-		MIPS_CPU_4KTLB | MIPS_CPU_COUNTER | MIPS_CPU_DIVEC |
-		MIPS_CPU_LLSC | MIPS_CPU_MCHECK;
 	config1 = read_c0_config1();
-	if (config1 & (1 << 3))
+
+	if (config1 & MIPS_CONF1_MD)
+		c->ases |= MIPS_ASE_MDMX;
+	if (config1 & MIPS_CONF1_WR)
 		c->options |= MIPS_CPU_WATCH;
-	if (config1 & (1 << 2))
-		c->options |= MIPS_CPU_MIPS16;
-	if (config1 & (1 << 1))
+	if (config1 & MIPS_CONF1_CA)
+		c->ases |= MIPS_ASE_MIPS16;
+	if (config1 & MIPS_CONF1_EP)
 		c->options |= MIPS_CPU_EJTAG;
-	if (config1 & 1) {
+	if (config1 & MIPS_CONF1_FP) {
 		c->options |= MIPS_CPU_FPU;
 		c->options |= MIPS_CPU_32FPR;
 	}
+	if (cpu_has_tlb)
+		c->tlbsize = ((config1 & MIPS_CONF1_TLBS) >> 25) + 1;
+
+	return config1 & MIPS_CONF_M;
+}
+
+static inline unsigned int decode_config2(struct cpuinfo_mips *c)
+{
+	unsigned int config2;
+
+	config2 = read_c0_config2();
+
+	if (config2 & MIPS_CONF2_SL)
+		c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
+
+	return config2 & MIPS_CONF_M;
+}
+
+static inline unsigned int decode_config3(struct cpuinfo_mips *c)
+{
+	unsigned int config3;
+
+	config3 = read_c0_config3();
+
+	if (config3 & MIPS_CONF3_SM)
+		c->ases |= MIPS_ASE_SMARTMIPS;
+	if (config3 & MIPS_CONF3_DSP)
+		c->ases |= MIPS_ASE_DSP;
+	if (config3 & MIPS_CONF3_VINT)
+		c->options |= MIPS_CPU_VINT;
+	if (config3 & MIPS_CONF3_VEIC)
+		c->options |= MIPS_CPU_VEIC;
+	if (config3 & MIPS_CONF3_MT)
+                c->ases |= MIPS_ASE_MIPSMT;
+
+	return config3 & MIPS_CONF_M;
+}
+
+static inline void decode_configs(struct cpuinfo_mips *c)
+{
+	/* MIPS32 or MIPS64 compliant CPU.  */
+	c->options = MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER |
+	             MIPS_CPU_DIVEC | MIPS_CPU_LLSC | MIPS_CPU_MCHECK;
+
 	c->scache.flags = MIPS_CACHE_NOT_PRESENT;
 
-	c->tlbsize = ((config1 >> 25) & 0x3f) + 1;
+	/* Read Config registers.  */
+	if (!decode_config0(c))
+		return;			/* actually worth a panic() */
+	if (!decode_config1(c))
+		return;
+	if (!decode_config2(c))
+		return;
+	if (!decode_config3(c))
+		return;
 }
 
 static inline void cpu_probe_mips(struct cpuinfo_mips *c)
 {
-	decode_config1(c);
+	decode_configs(c);
 	switch (c->processor_id & 0xff00) {
 	case PRID_IMP_4KC:
 		c->cputype = CPU_4KC;
-		c->isa_level = MIPS_CPU_ISA_M32;
 		break;
 	case PRID_IMP_4KEC:
 		c->cputype = CPU_4KEC;
-		c->isa_level = MIPS_CPU_ISA_M32;
+		break;
+	case PRID_IMP_4KECR2:
+		c->cputype = CPU_4KEC;
 		break;
 	case PRID_IMP_4KSC:
+	case PRID_IMP_4KSD:
 		c->cputype = CPU_4KSC;
-		c->isa_level = MIPS_CPU_ISA_M32;
 		break;
 	case PRID_IMP_5KC:
 		c->cputype = CPU_5KC;
-		c->isa_level = MIPS_CPU_ISA_M64;
 		break;
 	case PRID_IMP_20KC:
 		c->cputype = CPU_20KC;
-		c->isa_level = MIPS_CPU_ISA_M64;
 		break;
 	case PRID_IMP_24K:
+	case PRID_IMP_24KE:
 		c->cputype = CPU_24K;
-		c->isa_level = MIPS_CPU_ISA_M32;
 		break;
 	case PRID_IMP_25KF:
 		c->cputype = CPU_25KF;
-		c->isa_level = MIPS_CPU_ISA_M64;
 		/* Probe for L2 cache */
 		c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
 		break;
+	case PRID_IMP_34K:
+		c->cputype = CPU_34K;
+		c->isa_level = MIPS_CPU_ISA_M32;
+		break;
 	}
 }
 
 static inline void cpu_probe_alchemy(struct cpuinfo_mips *c)
 {
-	decode_config1(c);
+	decode_configs(c);
 	switch (c->processor_id & 0xff00) {
 	case PRID_IMP_AU1_REV1:
 	case PRID_IMP_AU1_REV2:
@@ -505,50 +592,70 @@ static inline void cpu_probe_alchemy(struct cpuinfo_mips *c)
 		case 3:
 			c->cputype = CPU_AU1550;
 			break;
+		case 4:
+			c->cputype = CPU_AU1200;
+			break;
 		default:
 			panic("Unknown Au Core!");
 			break;
 		}
-		c->isa_level = MIPS_CPU_ISA_M32;
 		break;
 	}
 }
 
 static inline void cpu_probe_sibyte(struct cpuinfo_mips *c)
 {
-	decode_config1(c);
+	decode_configs(c);
+
+	/*
+	 * For historical reasons the SB1 comes with it's own variant of
+	 * cache code which eventually will be folded into c-r4k.c.  Until
+	 * then we pretend it's got it's own cache architecture.
+	 */
+	c->options &= ~MIPS_CPU_4K_CACHE;
+	c->options |= MIPS_CPU_SB1_CACHE;
+
 	switch (c->processor_id & 0xff00) {
 	case PRID_IMP_SB1:
 		c->cputype = CPU_SB1;
-		c->isa_level = MIPS_CPU_ISA_M64;
-		c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
-		             MIPS_CPU_COUNTER | MIPS_CPU_DIVEC |
-		             MIPS_CPU_MCHECK | MIPS_CPU_EJTAG |
-		             MIPS_CPU_WATCH | MIPS_CPU_LLSC;
-#ifndef CONFIG_SB1_PASS_1_WORKAROUNDS
+#ifdef CONFIG_SB1_PASS_1_WORKAROUNDS
 		/* FPU in pass1 is known to have issues. */
-		c->options |= MIPS_CPU_FPU | MIPS_CPU_32FPR;
+		c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR);
 #endif
 		break;
+	case PRID_IMP_SB1A:
+		c->cputype = CPU_SB1A;
+		break;
 	}
 }
 
 static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c)
 {
-	decode_config1(c);
+	decode_configs(c);
 	switch (c->processor_id & 0xff00) {
 	case PRID_IMP_SR71000:
 		c->cputype = CPU_SR71000;
-		c->isa_level = MIPS_CPU_ISA_M64;
-		c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
-		             MIPS_CPU_4KTLB | MIPS_CPU_FPU |
-		             MIPS_CPU_COUNTER | MIPS_CPU_MCHECK;
 		c->scache.ways = 8;
 		c->tlbsize = 64;
 		break;
 	}
 }
 
+static inline void cpu_probe_philips(struct cpuinfo_mips *c)
+{
+	decode_configs(c);
+	switch (c->processor_id & 0xff00) {
+	case PRID_IMP_PR4450:
+		c->cputype = CPU_PR4450;
+		c->isa_level = MIPS_CPU_ISA_M32;
+		break;
+	default:
+		panic("Unknown Philips Core!"); /* REVISIT: die? */
+		break;
+	}
+}
+
+
 __init void cpu_probe(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
@@ -571,15 +678,24 @@ __init void cpu_probe(void)
 	case PRID_COMP_SIBYTE:
 		cpu_probe_sibyte(c);
 		break;
-
 	case PRID_COMP_SANDCRAFT:
 		cpu_probe_sandcraft(c);
 		break;
+ 	case PRID_COMP_PHILIPS:
+		cpu_probe_philips(c);
+ 		break;
 	default:
 		c->cputype = CPU_UNKNOWN;
 	}
-	if (c->options & MIPS_CPU_FPU)
+	if (c->options & MIPS_CPU_FPU) {
 		c->fpu_id = cpu_get_fpu_id();
+
+		if (c->isa_level == MIPS_CPU_ISA_M32 ||
+		    c->isa_level == MIPS_CPU_ISA_M64) {
+			if (c->fpu_id & MIPS_FPIR_3D)
+				c->ases |= MIPS_ASE_MIPS3D;
+		}
+	}
 }
 
 __init void cpu_report(void)
diff --git a/arch/mips/kernel/dma-no-isa.c b/arch/mips/kernel/dma-no-isa.c
new file mode 100644
index 000000000000..6df8b07741e3
--- /dev/null
+++ b/arch/mips/kernel/dma-no-isa.c
@@ -0,0 +1,28 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004 by Ralf Baechle
+ *
+ * Dummy ISA DMA functions for systems that don't have ISA but share drivers
+ * with ISA such as legacy free PCI.
+ */
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+
+DEFINE_SPINLOCK(dma_spin_lock);
+
+int request_dma(unsigned int dmanr, const char * device_id)
+{
+	return -EINVAL;
+}
+
+void free_dma(unsigned int dmanr)
+{
+}
+
+EXPORT_SYMBOL(dma_spin_lock);
+EXPORT_SYMBOL(request_dma);
+EXPORT_SYMBOL(free_dma);
diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S
index 5eb429137e06..83c87fe4ee4f 100644
--- a/arch/mips/kernel/entry.S
+++ b/arch/mips/kernel/entry.S
@@ -19,11 +19,11 @@
 #include <asm/war.h>
 
 #ifdef CONFIG_PREEMPT
-	.macro	preempt_stop reg=t0
+	.macro	preempt_stop
 	.endm
 #else
-	.macro	preempt_stop reg=t0
-	local_irq_disable \reg
+	.macro	preempt_stop
+	local_irq_disable
 	.endm
 #define resume_kernel	restore_all
 #endif
@@ -37,17 +37,18 @@ FEXPORT(ret_from_irq)
 	andi	t0, t0, KU_USER
 	beqz	t0, resume_kernel
 
-FEXPORT(resume_userspace)
-	local_irq_disable	t0	# make sure we dont miss an
+resume_userspace:
+	local_irq_disable		# make sure we dont miss an
 					# interrupt setting need_resched
 					# between sampling and return
 	LONG_L	a2, TI_FLAGS($28)	# current->work
-	andi	a2, _TIF_WORK_MASK	# (ignoring syscall_trace)
-	bnez	a2, work_pending
+	andi	t0, a2, _TIF_WORK_MASK	# (ignoring syscall_trace)
+	bnez	t0, work_pending
 	j	restore_all
 
 #ifdef CONFIG_PREEMPT
-ENTRY(resume_kernel)
+resume_kernel:
+	local_irq_disable
 	lw	t0, TI_PRE_COUNT($28)
 	bnez	t0, restore_all
 need_resched:
@@ -57,12 +58,7 @@ need_resched:
 	LONG_L	t0, PT_STATUS(sp)		# Interrupts off?
 	andi	t0, 1
 	beqz	t0, restore_all
-	li	t0, PREEMPT_ACTIVE
-	sw	t0, TI_PRE_COUNT($28)
-	local_irq_enable t0
-	jal	schedule
-	sw	zero, TI_PRE_COUNT($28)
-	local_irq_disable t0
+	jal	preempt_schedule_irq
 	b	need_resched
 #endif
 
@@ -88,13 +84,13 @@ FEXPORT(restore_partial)		# restore partial frame
 	RESTORE_SP_AND_RET
 	.set	at
 
-FEXPORT(work_pending)
-	andi	t0, a2, _TIF_NEED_RESCHED
+work_pending:
+	andi	t0, a2, _TIF_NEED_RESCHED # a2 is preloaded with TI_FLAGS
 	beqz	t0, work_notifysig
 work_resched:
 	jal	schedule
 
-	local_irq_disable t0		# make sure need_resched and
+	local_irq_disable		# make sure need_resched and
 					# signals dont change between
 					# sampling and return
 	LONG_L	a2, TI_FLAGS($28)
@@ -109,15 +105,14 @@ work_notifysig:				# deal with pending signals and
 	move	a0, sp
 	li	a1, 0
 	jal	do_notify_resume	# a2 already loaded
-	j	restore_all
+	j	resume_userspace
 
 FEXPORT(syscall_exit_work_partial)
 	SAVE_STATIC
-FEXPORT(syscall_exit_work)
-	LONG_L	t0, TI_FLAGS($28)
-	li	t1, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
-	and	t0, t1
-	beqz	t0, work_pending	# trace bit is set
+syscall_exit_work:
+	li	t0, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
+	and	t0, a2			# a2 is preloaded with TI_FLAGS
+	beqz	t0, work_pending	# trace bit set?
 	local_irq_enable		# could let do_syscall_trace()
 					# call schedule() instead
 	move	a0, sp
@@ -128,28 +123,25 @@ FEXPORT(syscall_exit_work)
 /*
  * Common spurious interrupt handler.
  */
-	.text
-	.align  5
 LEAF(spurious_interrupt)
 	/*
 	 * Someone tried to fool us by sending an interrupt but we
 	 * couldn't find a cause for it.
 	 */
+	PTR_LA	t1, irq_err_count
 #ifdef CONFIG_SMP
-	lui     t1, %hi(irq_err_count)
-1:	ll      t0, %lo(irq_err_count)(t1)
+1:	ll      t0, (t1)
 	addiu   t0, 1
-	sc      t0, %lo(irq_err_count)(t1)
+	sc      t0, (t1)
 #if R10000_LLSC_WAR
 	beqzl	t0, 1b
 #else
 	beqz	t0, 1b
 #endif
 #else
-	lui     t1, %hi(irq_err_count)
-	lw      t0, %lo(irq_err_count)(t1)
+	lw      t0, (t1)
 	addiu   t0, 1
-	sw      t0, %lo(irq_err_count)(t1)
+	sw      t0, (t1)
 #endif
 	j	ret_from_irq
 	END(spurious_interrupt)
diff --git a/arch/mips/kernel/gdb-low.S b/arch/mips/kernel/gdb-low.S
index 512bedbfa7b9..83b8986f9401 100644
--- a/arch/mips/kernel/gdb-low.S
+++ b/arch/mips/kernel/gdb-low.S
@@ -52,16 +52,15 @@
 		/*
 		 * Called from user mode, go somewhere else.
 		 */
-		lui	k1, %hi(saved_vectors)
 		mfc0	k0, CP0_CAUSE
 		andi	k0, k0, 0x7c
 		add	k1, k1, k0
-		lw	k0, %lo(saved_vectors)(k1)
+		PTR_L	k0, saved_vectors(k1)
 		jr	k0
 		nop
 1:
 		move	k0, sp
-		subu	sp, k1, GDB_FR_SIZE*2	# see comment above
+		PTR_SUBU sp, k1, GDB_FR_SIZE*2	# see comment above
 		LONG_S	k0, GDB_FR_REG29(sp)
 		LONG_S	$2, GDB_FR_REG2(sp)
 
diff --git a/arch/mips/kernel/gdb-stub.c b/arch/mips/kernel/gdb-stub.c
index d3fd1ab14274..96d18c43dca0 100644
--- a/arch/mips/kernel/gdb-stub.c
+++ b/arch/mips/kernel/gdb-stub.c
@@ -176,8 +176,10 @@ int kgdb_enabled;
 /*
  * spin locks for smp case
  */
-static spinlock_t kgdb_lock = SPIN_LOCK_UNLOCKED;
-static spinlock_t kgdb_cpulock[NR_CPUS] = { [0 ... NR_CPUS-1] = SPIN_LOCK_UNLOCKED};
+static DEFINE_SPINLOCK(kgdb_lock);
+static raw_spinlock_t kgdb_cpulock[NR_CPUS] = {
+	[0 ... NR_CPUS-1] = __RAW_SPIN_LOCK_UNLOCKED;
+};
 
 /*
  * BUFMAX defines the maximum number of characters in inbound/outbound buffers
@@ -637,29 +639,32 @@ static struct gdb_bp_save async_bp;
  * and only one can be active at a time.
  */
 extern spinlock_t smp_call_lock;
+
 void set_async_breakpoint(unsigned long *epc)
 {
 	/* skip breaking into userland */
 	if ((*epc & 0x80000000) == 0)
 		return;
 
+#ifdef CONFIG_SMP
 	/* avoid deadlock if someone is make IPC */
 	if (spin_is_locked(&smp_call_lock))
 		return;
+#endif
 
 	async_bp.addr = *epc;
 	*epc = (unsigned long)async_breakpoint;
 }
 
-void kgdb_wait(void *arg)
+static void kgdb_wait(void *arg)
 {
 	unsigned flags;
 	int cpu = smp_processor_id();
 
 	local_irq_save(flags);
 
-	spin_lock(&kgdb_cpulock[cpu]);
-	spin_unlock(&kgdb_cpulock[cpu]);
+	__raw_spin_lock(&kgdb_cpulock[cpu]);
+	__raw_spin_unlock(&kgdb_cpulock[cpu]);
 
 	local_irq_restore(flags);
 }
@@ -707,7 +712,7 @@ void handle_exception (struct gdb_regs *regs)
 	 * acquire the CPU spinlocks
 	 */
 	for (i = num_online_cpus()-1; i >= 0; i--)
-		if (spin_trylock(&kgdb_cpulock[i]) == 0)
+		if (__raw_spin_trylock(&kgdb_cpulock[i]) == 0)
 			panic("kgdb: couldn't get cpulock %d\n", i);
 
 	/*
@@ -982,7 +987,7 @@ finish_kgdb:
 exit_kgdb_exception:
 	/* release locks so other CPUs can go */
 	for (i = num_online_cpus()-1; i >= 0; i--)
-		spin_unlock(&kgdb_cpulock[i]);
+		__raw_spin_unlock(&kgdb_cpulock[i]);
 	spin_unlock(&kgdb_lock);
 
 	__flush_cache_all();
@@ -1036,12 +1041,12 @@ void adel(void)
  * malloc is needed by gdb client in "call func()", even a private one
  * will make gdb happy
  */
-static void *malloc(size_t size)
+static void * __attribute_used__ malloc(size_t size)
 {
 	return kmalloc(size, GFP_ATOMIC);
 }
 
-static void free(void *where)
+static void __attribute_used__ free (void *where)
 {
 	kfree(where);
 }
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index e7f6c1b90806..aa18a8b7b380 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -82,7 +82,7 @@ NESTED(except_vec3_r4000, 0, sp)
 	 li	k0, 14<<2
 	beq	k1, k0, handle_vcei
 #ifdef CONFIG_64BIT
-	dsll	k1, k1, 1
+	 dsll	k1, k1, 1
 #endif
 	.set	pop
 	PTR_L	k0, exception_handlers(k1)
@@ -90,17 +90,17 @@ NESTED(except_vec3_r4000, 0, sp)
 
 	/*
 	 * Big shit, we now may have two dirty primary cache lines for the same
-	 * physical address.  We can savely invalidate the line pointed to by
+	 * physical address.  We can safely invalidate the line pointed to by
 	 * c0_badvaddr because after return from this exception handler the
 	 * load / store will be re-executed.
 	 */
 handle_vced:
-	DMFC0	k0, CP0_BADVADDR
+	MFC0	k0, CP0_BADVADDR
 	li	k1, -4					# Is this ...
 	and	k0, k1					# ... really needed?
 	mtc0	zero, CP0_TAGLO
-	cache	Index_Store_Tag_D,(k0)
-	cache	Hit_Writeback_Inv_SD,(k0)
+	cache	Index_Store_Tag_D, (k0)
+	cache	Hit_Writeback_Inv_SD, (k0)
 #ifdef CONFIG_PROC_FS
 	PTR_LA	k0, vced_count
 	lw	k1, (k0)
@@ -148,6 +148,38 @@ NESTED(except_vec_ejtag_debug, 0, sp)
 	__FINIT
 
 /*
+ * Vectored interrupt handler.
+ * This prototype is copied to ebase + n*IntCtl.VS and patched
+ * to invoke the handler
+ */
+NESTED(except_vec_vi, 0, sp)
+	SAVE_SOME
+	SAVE_AT
+	.set	push
+	.set	noreorder
+EXPORT(except_vec_vi_lui)
+	lui	v0, 0		/* Patched */
+	j	except_vec_vi_handler
+EXPORT(except_vec_vi_ori)
+	 ori	v0, 0		/* Patched */
+	.set	pop
+	END(except_vec_vi)
+EXPORT(except_vec_vi_end)
+
+/*
+ * Common Vectored Interrupt code
+ * Complete the register saves and invoke the handler which is passed in $v0
+ */
+NESTED(except_vec_vi_handler, 0, sp)
+	SAVE_TEMP
+	SAVE_STATIC
+	CLI
+	move	a0, sp
+	jalr	v0
+	j	ret_from_irq
+	END(except_vec_vi_handler)
+
+/*
  * EJTAG debug exception handler.
  */
 NESTED(ejtag_debug_handler, PT_SIZE, sp)
@@ -291,6 +323,8 @@ NESTED(nmi_handler, PT_SIZE, sp)
 	BUILD_HANDLER mdmx mdmx sti silent		/* #22 */
 	BUILD_HANDLER watch watch sti verbose		/* #23 */
 	BUILD_HANDLER mcheck mcheck cli verbose		/* #24 */
+	BUILD_HANDLER mt mt sti verbose			/* #25 */
+	BUILD_HANDLER dsp dsp sti silent		/* #26 */
 	BUILD_HANDLER reserved reserved sti verbose	/* others */
 
 #ifdef CONFIG_64BIT
diff --git a/arch/mips/kernel/genrtc.c b/arch/mips/kernel/genrtc.c
deleted file mode 100644
index 71416e7bbbaa..000000000000
--- a/arch/mips/kernel/genrtc.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * A glue layer that provides RTC read/write to drivers/char/genrtc.c driver
- * based on MIPS internal RTC routines.  It does take care locking
- * issues so that we are SMP/Preemption safe.
- *
- * Copyright (C) 2004 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * Please read the COPYING file for all license details.
- */
-
-#include <linux/spinlock.h>
-
-#include <asm/rtc.h>
-#include <asm/time.h>
-
-static DEFINE_SPINLOCK(mips_rtc_lock);
-
-unsigned int get_rtc_time(struct rtc_time *time)
-{
-	unsigned long nowtime;
-
-	spin_lock(&mips_rtc_lock);
-	nowtime = rtc_get_time();
-	to_tm(nowtime, time);
-	time->tm_year -= 1900;
-	spin_unlock(&mips_rtc_lock);
-
-	return RTC_24H;
-}
-
-int set_rtc_time(struct rtc_time *time)
-{
-	unsigned long nowtime;
-	int ret;
-
-	spin_lock(&mips_rtc_lock);
-	nowtime = mktime(time->tm_year+1900, time->tm_mon+1,
-			time->tm_mday, time->tm_hour, time->tm_min,
-			time->tm_sec);
-	ret = rtc_set_time(nowtime);
-	spin_unlock(&mips_rtc_lock);
-
-	return ret;
-}
-
-unsigned int get_rtc_ss(void)
-{
-	struct rtc_time h;
-
-	get_rtc_time(&h);
-	return h.tm_sec;
-}
-
-int get_rtc_pll(struct rtc_pll_info *pll)
-{
-	return -EINVAL;
-}
-
-int set_rtc_pll(struct rtc_pll_info *pll)
-{
-	return -EINVAL;
-}
-
diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S
index 2a1b45d66f04..2e9122a4213a 100644
--- a/arch/mips/kernel/head.S
+++ b/arch/mips/kernel/head.S
@@ -22,11 +22,8 @@
 #include <asm/page.h>
 #include <asm/mipsregs.h>
 #include <asm/stackframe.h>
-#ifdef CONFIG_SGI_IP27
-#include <asm/sn/addrs.h>
-#include <asm/sn/sn0/hubni.h>
-#include <asm/sn/klkernvars.h>
-#endif
+
+#include <kernel-entry-init.h>
 
 	.macro	ARC64_TWIDDLE_PC
 #if defined(CONFIG_ARC64) || defined(CONFIG_MAPPED_KERNEL)
@@ -38,18 +35,6 @@
 #endif
 	.endm
 
-#ifdef CONFIG_SGI_IP27
-	/*
-	 * outputs the local nasid into res.  IP27 stuff.
-	 */
-	.macro GET_NASID_ASM res
-	dli	\res, LOCAL_HUB_ADDR(NI_STATUS_REV_ID)
-	ld	\res, (\res)
-	and	\res, NSRI_NODEID_MASK
-	dsrl	\res, NSRI_NODEID_SHFT
-	.endm
-#endif /* CONFIG_SGI_IP27 */
-
 	/*
 	 * inputs are the text nasid in t1, data nasid in t2.
 	 */
@@ -131,16 +116,21 @@
 EXPORT(stext)					# used for profiling
 EXPORT(_stext)
 
+#if defined(CONFIG_QEMU) || defined(CONFIG_MIPS_SIM)
+	/*
+	 * Give us a fighting chance of running if execution beings at the
+	 * kernel load address.  This is needed because this platform does
+	 * not have a ELF loader yet.
+	 */
+	j	kernel_entry
+#endif
 	__INIT
 
 NESTED(kernel_entry, 16, sp)			# kernel entry point
-	setup_c0_status_pri
 
-#ifdef CONFIG_SGI_IP27
-	GET_NASID_ASM	t1
-	move	t2, t1				# text and data are here
-	MAPPED_KERNEL_SETUP_TLB
-#endif /* IP27 */
+	kernel_entry_setup			# cpu specific setup
+
+	setup_c0_status_pri
 
 	ARC64_TWIDDLE_PC
 
@@ -157,6 +147,7 @@ NESTED(kernel_entry, 16, sp)			# kernel entry point
 	LONG_S		a2, fw_arg2
 	LONG_S		a3, fw_arg3
 
+	MTC0		zero, CP0_CONTEXT	# clear context register
 	PTR_LA		$28, init_thread_union
 	PTR_ADDIU	sp, $28, _THREAD_SIZE - 32
 	set_saved_sp	sp, t0, t1
@@ -165,6 +156,10 @@ NESTED(kernel_entry, 16, sp)			# kernel entry point
 	j		start_kernel
 	END(kernel_entry)
 
+#ifdef CONFIG_QEMU
+	__INIT
+#endif
+
 #ifdef CONFIG_SMP
 /*
  * SMP slave cpus entry point.  Board specific code for bootstrap calls this
@@ -172,20 +167,7 @@ NESTED(kernel_entry, 16, sp)			# kernel entry point
  */
 NESTED(smp_bootstrap, 16, sp)
 	setup_c0_status_sec
-
-#ifdef CONFIG_SGI_IP27
-	GET_NASID_ASM	t1
-	dli	t0, KLDIR_OFFSET + (KLI_KERN_VARS * KLDIR_ENT_SIZE) + \
-		    KLDIR_OFF_POINTER + CAC_BASE
-	dsll	t1, NASID_SHFT
-	or	t0, t0, t1
-	ld	t0, 0(t0)			# t0 points to kern_vars struct
-	lh	t1, KV_RO_NASID_OFFSET(t0)
-	lh	t2, KV_RW_NASID_OFFSET(t0)
-	MAPPED_KERNEL_SETUP_TLB
-	ARC64_TWIDDLE_PC
-#endif /* CONFIG_SGI_IP27 */
-
+	smp_slave_setup
 	j	start_secondary
 	END(smp_bootstrap)
 #endif /* CONFIG_SMP */
@@ -200,19 +182,13 @@ NESTED(smp_bootstrap, 16, sp)
 	.comm	fw_arg2, SZREG, SZREG
 	.comm	fw_arg3, SZREG, SZREG
 
-	.macro	page name, order=0
-	.globl	\name
-\name:	.size	\name, (_PAGE_SIZE << \order)
-	.org	. + (_PAGE_SIZE << \order)
-	.type	\name, @object
+	.macro page name, order
+	.comm	\name, (_PAGE_SIZE << \order), (_PAGE_SIZE << \order)
 	.endm
 
-	.data
-	.align	PAGE_SHIFT
-
 	/*
-	 * ... but on 64-bit we've got three-level pagetables with a
-	 * slightly different layout ...
+	 * On 64-bit we've got three-level pagetables with a slightly
+	 * different layout ...
 	 */
 	page	swapper_pg_dir, _PGD_ORDER
 #ifdef CONFIG_64BIT
diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c
index 447759201d1d..b974ac9057f6 100644
--- a/arch/mips/kernel/i8259.c
+++ b/arch/mips/kernel/i8259.c
@@ -31,7 +31,7 @@ void disable_8259A_irq(unsigned int irq);
  * moves to arch independent land
  */
 
-spinlock_t DEFINE_SPINLOCK(i8259A_lock);
+DEFINE_SPINLOCK(i8259A_lock);
 
 static void end_8259A_irq (unsigned int irq)
 {
@@ -52,14 +52,13 @@ static unsigned int startup_8259A_irq(unsigned int irq)
 }
 
 static struct hw_interrupt_type i8259A_irq_type = {
-	"XT-PIC",
-	startup_8259A_irq,
-	shutdown_8259A_irq,
-	enable_8259A_irq,
-	disable_8259A_irq,
-	mask_and_ack_8259A,
-	end_8259A_irq,
-	NULL
+	.typename = "XT-PIC",
+	.startup = startup_8259A_irq,
+	.shutdown = shutdown_8259A_irq,
+	.enable = enable_8259A_irq,
+	.disable = disable_8259A_irq,
+	.ack = mask_and_ack_8259A,
+	.end = end_8259A_irq,
 };
 
 /*
@@ -308,7 +307,7 @@ static struct resource pic2_io_resource = {
 
 /*
  * On systems with i8259-style interrupt controllers we assume for
- * driver compatibility reasons interrupts 0 - 15 to be the i8295
+ * driver compatibility reasons interrupts 0 - 15 to be the i8259
  * interrupts even if the hardware uses a different interrupt numbering.
  */
 void __init init_i8259_irqs (void)
@@ -322,7 +321,7 @@ void __init init_i8259_irqs (void)
 
 	for (i = 0; i < 16; i++) {
 		irq_desc[i].status = IRQ_DISABLED;
-		irq_desc[i].action = 0;
+		irq_desc[i].action = NULL;
 		irq_desc[i].depth = 1;
 		irq_desc[i].handler = &i8259A_irq_type;
 	}
diff --git a/arch/mips/kernel/ioctl32.c b/arch/mips/kernel/ioctl32.c
index c069719ff0d8..9ea1fc748864 100644
--- a/arch/mips/kernel/ioctl32.c
+++ b/arch/mips/kernel/ioctl32.c
@@ -26,10 +26,8 @@ long sys_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg);
 #define CODE
 #include "compat_ioctl.c"
 
-typedef int (* ioctl32_handler_t)(unsigned int, unsigned int, unsigned long, struct file *);
-
 #define COMPATIBLE_IOCTL(cmd)		HANDLE_IOCTL((cmd),sys_ioctl)
-#define HANDLE_IOCTL(cmd,handler)	{ (cmd), (ioctl32_handler_t)(handler), NULL },
+#define HANDLE_IOCTL(cmd,handler)	{ (cmd), (ioctl_trans_handler_t)(handler), NULL },
 #define IOCTL_TABLE_START \
 	struct ioctl_trans ioctl_start[] = {
 #define IOCTL_TABLE_END \
@@ -41,12 +39,6 @@ IOCTL_TABLE_START
 #define DECLARES
 #include "compat_ioctl.c"
 
-#ifdef CONFIG_SIBYTE_TBPROF
-COMPATIBLE_IOCTL(SBPROF_ZBSTART)
-COMPATIBLE_IOCTL(SBPROF_ZBSTOP)
-COMPATIBLE_IOCTL(SBPROF_ZBWAITFULL)
-#endif /* CONFIG_SIBYTE_TBPROF */
-
 /*HANDLE_IOCTL(RTC_IRQP_READ, w_long)
 COMPATIBLE_IOCTL(RTC_IRQP_SET)
 HANDLE_IOCTL(RTC_EPOCH_READ, w_long)
diff --git a/arch/mips/kernel/irixelf.c b/arch/mips/kernel/irixelf.c
index 4af20cd91f9f..10d3644e3608 100644
--- a/arch/mips/kernel/irixelf.c
+++ b/arch/mips/kernel/irixelf.c
@@ -8,7 +8,7 @@
  *
  * Copyright (C) 1993 - 1994 Eric Youngdale <ericy@cais.com>
  * Copyright (C) 1996 - 2004 David S. Miller <dm@engr.sgi.com>
- * Copyright (C) 2004 Steven J. Hill <sjhill@realitydiluted.com>
+ * Copyright (C) 2004 - 2005 Steven J. Hill <sjhill@realitydiluted.com>
  */
 #include <linux/module.h>
 #include <linux/fs.h>
@@ -31,15 +31,16 @@
 #include <linux/elfcore.h>
 #include <linux/smp_lock.h>
 
-#include <asm/uaccess.h>
 #include <asm/mipsregs.h>
+#include <asm/namei.h>
 #include <asm/prctl.h>
+#include <asm/uaccess.h>
 
 #define DLINFO_ITEMS 12
 
 #include <linux/elf.h>
 
-#undef DEBUG_ELF
+#undef DEBUG
 
 static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs);
 static int load_irix_library(struct file *);
@@ -55,7 +56,7 @@ static struct linux_binfmt irix_format = {
 #define elf_addr_t unsigned long
 #endif
 
-#ifdef DEBUG_ELF
+#ifdef DEBUG
 /* Debugging routines. */
 static char *get_elf_p_type(Elf32_Word p_type)
 {
@@ -120,7 +121,7 @@ static void dump_phdrs(struct elf_phdr *ep, int pnum)
 			print_phdr(i, ep);
 	}
 }
-#endif /* (DEBUG_ELF) */
+#endif /* DEBUG */
 
 static void set_brk(unsigned long start, unsigned long end)
 {
@@ -146,20 +147,20 @@ static void padzero(unsigned long elf_bss)
 	nbyte = elf_bss & (PAGE_SIZE-1);
 	if (nbyte) {
 		nbyte = PAGE_SIZE - nbyte;
-		clear_user((void *) elf_bss, nbyte);
+		clear_user((void __user *) elf_bss, nbyte);
 	}
 }
 
-unsigned long * create_irix_tables(char * p, int argc, int envc,
-				   struct elfhdr * exec, unsigned int load_addr,
-				   unsigned int interp_load_addr,
-				   struct pt_regs *regs, struct elf_phdr *ephdr)
+static unsigned long * create_irix_tables(char * p, int argc, int envc,
+	struct elfhdr * exec, unsigned int load_addr,
+	unsigned int interp_load_addr, struct pt_regs *regs,
+	struct elf_phdr *ephdr)
 {
 	elf_addr_t *argv;
 	elf_addr_t *envp;
 	elf_addr_t *sp, *csp;
 
-#ifdef DEBUG_ELF
+#ifdef DEBUG
 	printk("create_irix_tables: p[%p] argc[%d] envc[%d] "
 	       "load_addr[%08x] interp_load_addr[%08x]\n",
 	       p, argc, envc, load_addr, interp_load_addr);
@@ -248,14 +249,13 @@ static unsigned int load_irix_interp(struct elfhdr * interp_elf_ex,
 	last_bss = 0;
 	error = load_addr = 0;
 
-#ifdef DEBUG_ELF
+#ifdef DEBUG
 	print_elfhdr(interp_elf_ex);
 #endif
 
 	/* First of all, some simple consistency checks */
 	if ((interp_elf_ex->e_type != ET_EXEC &&
 	     interp_elf_ex->e_type != ET_DYN) ||
-	     !irix_elf_check_arch(interp_elf_ex) ||
 	     !interpreter->f_op->mmap) {
 		printk("IRIX interp has bad e_type %d\n", interp_elf_ex->e_type);
 		return 0xffffffff;
@@ -290,7 +290,7 @@ static unsigned int load_irix_interp(struct elfhdr * interp_elf_ex,
 			   (char *) elf_phdata,
 			   sizeof(struct elf_phdr) * interp_elf_ex->e_phnum);
 
-#ifdef DEBUG_ELF
+#ifdef DEBUG
 	dump_phdrs(elf_phdata, interp_elf_ex->e_phnum);
 #endif
 
@@ -306,13 +306,11 @@ static unsigned int load_irix_interp(struct elfhdr * interp_elf_ex,
 	    elf_type |= MAP_FIXED;
 	    vaddr = eppnt->p_vaddr;
 
-#ifdef DEBUG_ELF
-	    printk("INTERP do_mmap(%p, %08lx, %08lx, %08lx, %08lx, %08lx) ",
+	    pr_debug("INTERP do_mmap(%p, %08lx, %08lx, %08lx, %08lx, %08lx) ",
 		   interpreter, vaddr,
 		   (unsigned long) (eppnt->p_filesz + (eppnt->p_vaddr & 0xfff)),
 		   (unsigned long) elf_prot, (unsigned long) elf_type,
 		   (unsigned long) (eppnt->p_offset & 0xfffff000));
-#endif
 	    down_write(&current->mm->mmap_sem);
 	    error = do_mmap(interpreter, vaddr,
 			    eppnt->p_filesz + (eppnt->p_vaddr & 0xfff),
@@ -324,14 +322,10 @@ static unsigned int load_irix_interp(struct elfhdr * interp_elf_ex,
 		    printk("Aieee IRIX interp mmap error=%d\n", error);
 		    break;  /* Real error */
 	    }
-#ifdef DEBUG_ELF
-	    printk("error=%08lx ", (unsigned long) error);
-#endif
+	    pr_debug("error=%08lx ", (unsigned long) error);
 	    if(!load_addr && interp_elf_ex->e_type == ET_DYN) {
 	      load_addr = error;
-#ifdef DEBUG_ELF
-              printk("load_addr = error ");
-#endif
+              pr_debug("load_addr = error ");
 	    }
 
 	    /* Find the end of the file  mapping for this phdr, and keep
@@ -345,17 +339,13 @@ static unsigned int load_irix_interp(struct elfhdr * interp_elf_ex,
 	     */
 	    k = eppnt->p_memsz + eppnt->p_vaddr;
 	    if(k > last_bss) last_bss = k;
-#ifdef DEBUG_ELF
-	    printk("\n");
-#endif
+	    pr_debug("\n");
 	  }
 	}
 
 	/* Now use mmap to map the library into memory. */
 	if(error < 0 && error > -1024) {
-#ifdef DEBUG_ELF
-		printk("got error %d\n", error);
-#endif
+		pr_debug("got error %d\n", error);
 		kfree(elf_phdata);
 		return 0xffffffff;
 	}
@@ -365,16 +355,12 @@ static unsigned int load_irix_interp(struct elfhdr * interp_elf_ex,
 	 * that there are zero-mapped pages up to and including the
 	 * last bss page.
 	 */
-#ifdef DEBUG_ELF
-	printk("padzero(%08lx) ", (unsigned long) (elf_bss));
-#endif
+	pr_debug("padzero(%08lx) ", (unsigned long) (elf_bss));
 	padzero(elf_bss);
 	len = (elf_bss + 0xfff) & 0xfffff000; /* What we have mapped so far */
 
-#ifdef DEBUG_ELF
-	printk("last_bss[%08lx] len[%08lx]\n", (unsigned long) last_bss,
-	       (unsigned long) len);
-#endif
+	pr_debug("last_bss[%08lx] len[%08lx]\n", (unsigned long) last_bss,
+	         (unsigned long) len);
 
 	/* Map the last of the bss segment */
 	if (last_bss > len) {
@@ -396,12 +382,7 @@ static int verify_binary(struct elfhdr *ehp, struct linux_binprm *bprm)
 
 	/* First of all, some simple consistency checks */
 	if((ehp->e_type != ET_EXEC && ehp->e_type != ET_DYN) ||
-	    !irix_elf_check_arch(ehp) || !bprm->file->f_op->mmap) {
-		return -ENOEXEC;
-	}
-
-	/* Only support MIPS ARCH2 or greater IRIX binaries for now. */
-	if(!(ehp->e_flags & EF_MIPS_ARCH) && !(ehp->e_flags & 0x04)) {
+	    !bprm->file->f_op->mmap) {
 		return -ENOEXEC;
 	}
 
@@ -411,16 +392,17 @@ static int verify_binary(struct elfhdr *ehp, struct linux_binprm *bprm)
 	 * XXX all registers as 64bits on cpu's capable of this at
 	 * XXX exception time plus frob the XTLB exception vector.
 	 */
-	if((ehp->e_flags & 0x20)) {
+	if((ehp->e_flags & EF_MIPS_ABI2))
 		return -ENOEXEC;
-	}
 
-	return 0; /* It's ok. */
+	return 0;
 }
 
-#define IRIX_INTERP_PREFIX "/usr/gnemul/irix"
-
-/* Look for an IRIX ELF interpreter. */
+/*
+ * This is where the detailed check is performed. Irix binaries
+ * use interpreters with 'libc.so' in the name, so this function
+ * can differentiate between Linux and Irix binaries.
+ */
 static inline int look_for_irix_interpreter(char **name,
 					    struct file **interpreter,
 					    struct elfhdr *interp_elf_ex,
@@ -440,12 +422,11 @@ static inline int look_for_irix_interpreter(char **name,
 		if (*name != NULL)
 			goto out;
 
-		*name = kmalloc((epp->p_filesz + strlen(IRIX_INTERP_PREFIX)),
-				GFP_KERNEL);
+		*name = kmalloc(epp->p_filesz + strlen(IRIX_EMUL), GFP_KERNEL);
 		if (!*name)
 			return -ENOMEM;
 
-		strcpy(*name, IRIX_INTERP_PREFIX);
+		strcpy(*name, IRIX_EMUL);
 		retval = kernel_read(bprm->file, epp->p_offset, (*name + 16),
 		                     epp->p_filesz);
 		if (retval < 0)
@@ -562,7 +543,7 @@ static inline int map_interpreter(struct elf_phdr *epp, struct elfhdr *ihp,
  * process and the system, here we map the page and fill the
  * structure
  */
-void irix_map_prda_page (void)
+static void irix_map_prda_page(void)
 {
 	unsigned long v;
 	struct prda *pp;
@@ -601,14 +582,33 @@ static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs)
 
 	load_addr = 0;
 	has_interp = has_ephdr = 0;
-	elf_ihdr = elf_ephdr = 0;
+	elf_ihdr = elf_ephdr = NULL;
 	elf_ex = *((struct elfhdr *) bprm->buf);
 	retval = -ENOEXEC;
 
 	if (verify_binary(&elf_ex, bprm))
 		goto out;
 
-#ifdef DEBUG_ELF
+	/*
+	 * Telling -o32 static binaries from Linux and Irix apart from each
+	 * other is difficult. There are 2 differences to be noted for static
+	 * binaries from the 2 operating systems:
+	 *
+	 *    1) Irix binaries have their .text section before their .init
+	 *       section. Linux binaries are just the opposite.
+	 *
+	 *    2) Irix binaries usually have <= 12 sections and Linux
+	 *       binaries have > 20.
+	 *
+	 * We will use Method #2 since Method #1 would require us to read in
+	 * the section headers which is way too much overhead. This appears
+	 * to work for everything we have ran into so far. If anyone has a
+	 * better method to tell the binaries apart, I'm listening.
+	 */
+	if (elf_ex.e_shnum > 20)
+		goto out;
+
+#ifdef DEBUG
 	print_elfhdr(&elf_ex);
 #endif
 
@@ -623,11 +623,10 @@ static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs)
 	}
 
 	retval = kernel_read(bprm->file, elf_ex.e_phoff, (char *)elf_phdata, size);
-
 	if (retval < 0)
 		goto out_free_ph;
 
-#ifdef DEBUG_ELF
+#ifdef DEBUG
 	dump_phdrs(elf_phdata, elf_ex.e_phnum);
 #endif
 
@@ -644,9 +643,8 @@ static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs)
 			break;
 		};
 	}
-#ifdef DEBUG_ELF
-	printk("\n");
-#endif
+
+	pr_debug("\n");
 
 	elf_bss = 0;
 	elf_brk = 0;
@@ -657,12 +655,19 @@ static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs)
 	end_code = 0;
 	end_data = 0;
 
-	retval = look_for_irix_interpreter(&elf_interpreter,
-	                                   &interpreter,
+	/*
+	 * If we get a return value, we change the value to be ENOEXEC
+	 * so that we can exit gracefully and the main binary format
+	 * search loop in 'fs/exec.c' will move onto the next handler
+	 * which should be the normal ELF binary handler.
+	 */
+	retval = look_for_irix_interpreter(&elf_interpreter, &interpreter,
 					   &interp_elf_ex, elf_phdata, bprm,
 					   elf_ex.e_phnum);
-	if (retval)
+	if (retval) {
+		retval = -ENOEXEC;
 		goto out_free_file;
+	}
 
 	if (elf_interpreter) {
 		retval = verify_irix_interpreter(&interp_elf_ex);
@@ -692,7 +697,6 @@ static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs)
 	/* Do this so that we can load the interpreter, if need be.  We will
 	 * change some of these later.
 	 */
-	set_mm_counter(current->mm, rss, 0);
 	setup_arg_pages(bprm, STACK_TOP, EXSTACK_DEFAULT);
 	current->mm->start_stack = bprm->p;
 
@@ -746,18 +750,16 @@ static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs)
 	 * IRIX maps a page at 0x200000 which holds some system
 	 * information.  Programs depend on this.
 	 */
-	irix_map_prda_page ();
+	irix_map_prda_page();
 
 	padzero(elf_bss);
 
-#ifdef DEBUG_ELF
-	printk("(start_brk) %lx\n" , (long) current->mm->start_brk);
-	printk("(end_code) %lx\n" , (long) current->mm->end_code);
-	printk("(start_code) %lx\n" , (long) current->mm->start_code);
-	printk("(end_data) %lx\n" , (long) current->mm->end_data);
-	printk("(start_stack) %lx\n" , (long) current->mm->start_stack);
-	printk("(brk) %lx\n" , (long) current->mm->brk);
-#endif
+	pr_debug("(start_brk) %lx\n" , (long) current->mm->start_brk);
+	pr_debug("(end_code) %lx\n" , (long) current->mm->end_code);
+	pr_debug("(start_code) %lx\n" , (long) current->mm->start_code);
+	pr_debug("(end_data) %lx\n" , (long) current->mm->end_data);
+	pr_debug("(start_stack) %lx\n" , (long) current->mm->start_stack);
+	pr_debug("(brk) %lx\n" , (long) current->mm->brk);
 
 #if 0 /* XXX No fucking way dude... */
 	/* Why this, you ask???  Well SVr4 maps page 0 as read-only,
@@ -782,8 +784,7 @@ out_free_dentry:
 	allow_write_access(interpreter);
 	fput(interpreter);
 out_free_interp:
-	if (elf_interpreter)
-		kfree(elf_interpreter);
+	kfree(elf_interpreter);
 out_free_file:
 out_free_ph:
 	kfree (elf_phdata);
@@ -813,7 +814,7 @@ static int load_irix_library(struct file *file)
 
 	/* First of all, some simple consistency checks. */
 	if(elf_ex.e_type != ET_EXEC || elf_ex.e_phnum > 2 ||
-	   !irix_elf_check_arch(&elf_ex) || !file->f_op->mmap)
+	   !file->f_op->mmap)
 		return -ENOEXEC;
 
 	/* Now read in all of the header information. */
@@ -874,35 +875,36 @@ static int load_irix_library(struct file *file)
  * phdrs there are in the USER_PHDRP array.  We return the vaddr the
  * first phdr was successfully mapped to.
  */
-unsigned long irix_mapelf(int fd, struct elf_phdr *user_phdrp, int cnt)
+unsigned long irix_mapelf(int fd, struct elf_phdr __user *user_phdrp, int cnt)
 {
-	struct elf_phdr *hp;
+	unsigned long type, vaddr, filesz, offset, flags;
+	struct elf_phdr __user *hp;
 	struct file *filp;
 	int i, retval;
 
-#ifdef DEBUG_ELF
-	printk("irix_mapelf: fd[%d] user_phdrp[%p] cnt[%d]\n",
-	       fd, user_phdrp, cnt);
-#endif
+	pr_debug("irix_mapelf: fd[%d] user_phdrp[%p] cnt[%d]\n",
+	         fd, user_phdrp, cnt);
 
 	/* First get the verification out of the way. */
 	hp = user_phdrp;
 	if (!access_ok(VERIFY_READ, hp, (sizeof(struct elf_phdr) * cnt))) {
-#ifdef DEBUG_ELF
-		printk("irix_mapelf: access_ok fails!\n");
-#endif
+		pr_debug("irix_mapelf: bad pointer to ELF PHDR!\n");
+
 		return -EFAULT;
 	}
 
-#ifdef DEBUG_ELF
+#ifdef DEBUG
 	dump_phdrs(user_phdrp, cnt);
 #endif
 
-	for(i = 0; i < cnt; i++, hp++)
-		if(hp->p_type != PT_LOAD) {
+	for (i = 0; i < cnt; i++, hp++) {
+		if (__get_user(type, &hp->p_type))
+			return -EFAULT;
+		if (type != PT_LOAD) {
 			printk("irix_mapelf: One section is not PT_LOAD!\n");
 			return -ENOEXEC;
 		}
+	}
 
 	filp = fget(fd);
 	if (!filp)
@@ -917,29 +919,40 @@ unsigned long irix_mapelf(int fd, struct elf_phdr *user_phdrp, int cnt)
 	for(i = 0; i < cnt; i++, hp++) {
 		int prot;
 
-		prot  = (hp->p_flags & PF_R) ? PROT_READ : 0;
-		prot |= (hp->p_flags & PF_W) ? PROT_WRITE : 0;
-		prot |= (hp->p_flags & PF_X) ? PROT_EXEC : 0;
+		retval = __get_user(vaddr, &hp->p_vaddr);
+		retval |= __get_user(filesz, &hp->p_filesz);
+		retval |= __get_user(offset, &hp->p_offset);
+		retval |= __get_user(flags, &hp->p_flags);
+		if (retval)
+			return retval;
+
+		prot  = (flags & PF_R) ? PROT_READ : 0;
+		prot |= (flags & PF_W) ? PROT_WRITE : 0;
+		prot |= (flags & PF_X) ? PROT_EXEC : 0;
+
 		down_write(&current->mm->mmap_sem);
-		retval = do_mmap(filp, (hp->p_vaddr & 0xfffff000),
-				 (hp->p_filesz + (hp->p_vaddr & 0xfff)),
+		retval = do_mmap(filp, (vaddr & 0xfffff000),
+				 (filesz + (vaddr & 0xfff)),
 				 prot, (MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE),
-				 (hp->p_offset & 0xfffff000));
+				 (offset & 0xfffff000));
 		up_write(&current->mm->mmap_sem);
 
-		if(retval != (hp->p_vaddr & 0xfffff000)) {
+		if (retval != (vaddr & 0xfffff000)) {
 			printk("irix_mapelf: do_mmap fails with %d!\n", retval);
 			fput(filp);
 			return retval;
 		}
 	}
 
-#ifdef DEBUG_ELF
-	printk("irix_mapelf: Success, returning %08lx\n",
-		(unsigned long) user_phdrp->p_vaddr);
-#endif
+	pr_debug("irix_mapelf: Success, returning %08lx\n",
+		 (unsigned long) user_phdrp->p_vaddr);
+
 	fput(filp);
-	return user_phdrp->p_vaddr;
+
+	if (__get_user(vaddr, &user_phdrp->p_vaddr))
+		return -EFAULT;
+
+	return vaddr;
 }
 
 /*
@@ -952,9 +965,9 @@ unsigned long irix_mapelf(int fd, struct elf_phdr *user_phdrp, int cnt)
 /* These are the only things you should do on a core-file: use only these
  * functions to write out all the necessary info.
  */
-static int dump_write(struct file *file, const void *addr, int nr)
+static int dump_write(struct file *file, const void __user *addr, int nr)
 {
-	return file->f_op->write(file, addr, nr, &file->f_pos) == nr;
+	return file->f_op->write(file, (const char __user *) addr, nr, &file->f_pos) == nr;
 }
 
 static int dump_seek(struct file *file, off_t off)
@@ -1064,8 +1077,8 @@ static int irix_core_dump(long signr, struct pt_regs * regs, struct file *file)
 	struct elfhdr elf;
 	off_t offset = 0, dataoff;
 	int limit = current->signal->rlim[RLIMIT_CORE].rlim_cur;
-	int numnote = 4;
-	struct memelfnote notes[4];
+	int numnote = 3;
+	struct memelfnote notes[3];
 	struct elf_prstatus prstatus;	/* NT_PRSTATUS */
 	elf_fpregset_t fpu;		/* NT_PRFPREG */
 	struct elf_prpsinfo psinfo;	/* NT_PRPSINFO */
@@ -1073,7 +1086,7 @@ static int irix_core_dump(long signr, struct pt_regs * regs, struct file *file)
 	/* Count what's needed to dump, up to the limit of coredump size. */
 	segs = 0;
 	size = 0;
-	for(vma = current->mm->mmap; vma != NULL; vma = vma->vm_next) {
+	for (vma = current->mm->mmap; vma != NULL; vma = vma->vm_next) {
 		if (maydump(vma))
 		{
 			int sz = vma->vm_end-vma->vm_start;
@@ -1187,9 +1200,9 @@ static int irix_core_dump(long signr, struct pt_regs * regs, struct file *file)
 
 		len = current->mm->arg_end - current->mm->arg_start;
 		len = len >= ELF_PRARGSZ ? ELF_PRARGSZ : len;
-		copy_from_user(&psinfo.pr_psargs,
-			       (const char *)current->mm->arg_start, len);
-		for(i = 0; i < len; i++)
+		(void *) copy_from_user(&psinfo.pr_psargs,
+			       (const char __user *)current->mm->arg_start, len);
+		for (i = 0; i < len; i++)
 			if (psinfo.pr_psargs[i] == 0)
 				psinfo.pr_psargs[i] = ' ';
 		psinfo.pr_psargs[len] = 0;
@@ -1198,20 +1211,15 @@ static int irix_core_dump(long signr, struct pt_regs * regs, struct file *file)
 	}
 	strlcpy(psinfo.pr_fname, current->comm, sizeof(psinfo.pr_fname));
 
-	notes[2].name = "CORE";
-	notes[2].type = NT_TASKSTRUCT;
-	notes[2].datasz = sizeof(*current);
-	notes[2].data = current;
-
 	/* Try to dump the FPU. */
 	prstatus.pr_fpvalid = dump_fpu (regs, &fpu);
 	if (!prstatus.pr_fpvalid) {
 		numnote--;
 	} else {
-		notes[3].name = "CORE";
-		notes[3].type = NT_PRFPREG;
-		notes[3].datasz = sizeof(fpu);
-		notes[3].data = &fpu;
+		notes[2].name = "CORE";
+		notes[2].type = NT_PRFPREG;
+		notes[2].datasz = sizeof(fpu);
+		notes[2].data = &fpu;
 	}
 
 	/* Write notes phdr entry. */
@@ -1256,8 +1264,10 @@ static int irix_core_dump(long signr, struct pt_regs * regs, struct file *file)
 		phdr.p_memsz = sz;
 		offset += phdr.p_filesz;
 		phdr.p_flags = vma->vm_flags & VM_READ ? PF_R : 0;
-		if (vma->vm_flags & VM_WRITE) phdr.p_flags |= PF_W;
-		if (vma->vm_flags & VM_EXEC) phdr.p_flags |= PF_X;
+		if (vma->vm_flags & VM_WRITE)
+			phdr.p_flags |= PF_W;
+		if (vma->vm_flags & VM_EXEC)
+			phdr.p_flags |= PF_X;
 		phdr.p_align = PAGE_SIZE;
 
 		DUMP_WRITE(&phdr, sizeof(phdr));
@@ -1283,7 +1293,7 @@ static int irix_core_dump(long signr, struct pt_regs * regs, struct file *file)
 #ifdef DEBUG
 		printk("elf_core_dump: writing %08lx %lx\n", addr, len);
 #endif
-		DUMP_WRITE((void *)addr, len);
+		DUMP_WRITE((void __user *)addr, len);
 	}
 
 	if ((off_t) file->f_pos != offset) {
@@ -1299,7 +1309,7 @@ end_coredump:
 
 static int __init init_irix_binfmt(void)
 {
-	int init_inventory(void);
+	extern int init_inventory(void);
 	extern asmlinkage unsigned long sys_call_table;
 	extern asmlinkage unsigned long sys_call_table_irix5;
 
@@ -1318,7 +1328,9 @@ static int __init init_irix_binfmt(void)
 
 static void __exit exit_irix_binfmt(void)
 {
-	/* Remove the IRIX ELF loaders. */
+	/*
+	 * Remove the Irix ELF loader.
+	 */
 	unregister_binfmt(&irix_format);
 }
 
diff --git a/arch/mips/kernel/irixinv.c b/arch/mips/kernel/irixinv.c
index 60aa98cd1791..de8584f62311 100644
--- a/arch/mips/kernel/irixinv.c
+++ b/arch/mips/kernel/irixinv.c
@@ -30,10 +30,10 @@ void add_to_inventory (int class, int type, int controller, int unit, int state)
 	inventory_items++;
 }
 
-int dump_inventory_to_user (void *userbuf, int size)
+int dump_inventory_to_user (void __user *userbuf, int size)
 {
 	inventory_t *inv  = &inventory [0];
-	inventory_t *user = userbuf;
+	inventory_t __user *user = userbuf;
 	int v;
 
 	if (!access_ok(VERIFY_WRITE, userbuf, size))
@@ -41,7 +41,8 @@ int dump_inventory_to_user (void *userbuf, int size)
 
 	for (v = 0; v < inventory_items; v++){
 		inv = &inventory [v];
-		copy_to_user (user, inv, sizeof (inventory_t));
+		if (copy_to_user (user, inv, sizeof (inventory_t)))
+			return -EFAULT;
 		user++;
 	}
 	return inventory_items * sizeof (inventory_t);
diff --git a/arch/mips/kernel/irixioctl.c b/arch/mips/kernel/irixioctl.c
index 3cdc22346f4c..e2863821a3dd 100644
--- a/arch/mips/kernel/irixioctl.c
+++ b/arch/mips/kernel/irixioctl.c
@@ -59,7 +59,7 @@ asmlinkage int irix_ioctl(int fd, unsigned long cmd, unsigned long arg)
 {
 	struct tty_struct *tp, *rtp;
 	mm_segment_t old_fs;
-	int error = 0;
+	int i, error = 0;
 
 #ifdef DEBUG_IOCTLS
 	printk("[%s:%d] irix_ioctl(%d, ", current->comm, current->pid, fd);
@@ -74,12 +74,13 @@ asmlinkage int irix_ioctl(int fd, unsigned long cmd, unsigned long arg)
 
 	case 0x0000540d: {
 		struct termios kt;
-		struct irix_termios *it = (struct irix_termios *) arg;
+		struct irix_termios __user *it =
+			(struct irix_termios __user *) arg;
 
 #ifdef DEBUG_IOCTLS
 		printk("TCGETS, %08lx) ", arg);
 #endif
-		if(!access_ok(VERIFY_WRITE, it, sizeof(*it))) {
+		if (!access_ok(VERIFY_WRITE, it, sizeof(*it))) {
 			error = -EFAULT;
 			break;
 		}
@@ -88,13 +89,14 @@ asmlinkage int irix_ioctl(int fd, unsigned long cmd, unsigned long arg)
 		set_fs(old_fs);
 		if (error)
 			break;
-		__put_user(kt.c_iflag, &it->c_iflag);
-		__put_user(kt.c_oflag, &it->c_oflag);
-		__put_user(kt.c_cflag, &it->c_cflag);
-		__put_user(kt.c_lflag, &it->c_lflag);
-		for(error = 0; error < NCCS; error++)
-			__put_user(kt.c_cc[error], &it->c_cc[error]);
-		error = 0;
+
+		error = __put_user(kt.c_iflag, &it->c_iflag);
+		error |= __put_user(kt.c_oflag, &it->c_oflag);
+		error |= __put_user(kt.c_cflag, &it->c_cflag);
+		error |= __put_user(kt.c_lflag, &it->c_lflag);
+
+		for (i = 0; i < NCCS; i++)
+			error |= __put_user(kt.c_cc[i], &it->c_cc[i]);
 		break;
 	}
 
@@ -112,14 +114,19 @@ asmlinkage int irix_ioctl(int fd, unsigned long cmd, unsigned long arg)
 		old_fs = get_fs(); set_fs(get_ds());
 		error = sys_ioctl(fd, TCGETS, (unsigned long) &kt);
 		set_fs(old_fs);
-		if(error)
+		if (error)
+			break;
+
+		error = __get_user(kt.c_iflag, &it->c_iflag);
+		error |= __get_user(kt.c_oflag, &it->c_oflag);
+		error |= __get_user(kt.c_cflag, &it->c_cflag);
+		error |= __get_user(kt.c_lflag, &it->c_lflag);
+
+		for (i = 0; i < NCCS; i++)
+			error |= __get_user(kt.c_cc[i], &it->c_cc[i]);
+
+		if (error)
 			break;
-		__get_user(kt.c_iflag, &it->c_iflag);
-		__get_user(kt.c_oflag, &it->c_oflag);
-		__get_user(kt.c_cflag, &it->c_cflag);
-		__get_user(kt.c_lflag, &it->c_lflag);
-		for(error = 0; error < NCCS; error++)
-			__get_user(kt.c_cc[error], &it->c_cc[error]);
 		old_fs = get_fs(); set_fs(get_ds());
 		error = sys_ioctl(fd, TCSETS, (unsigned long) &kt);
 		set_fs(old_fs);
@@ -153,7 +160,7 @@ asmlinkage int irix_ioctl(int fd, unsigned long cmd, unsigned long arg)
 #ifdef DEBUG_IOCTLS
 		printk("rtp->session=%d ", rtp->session);
 #endif
-		error = put_user(rtp->session, (unsigned long *) arg);
+		error = put_user(rtp->session, (unsigned long __user *) arg);
 		break;
 
 	case 0x746e:
@@ -195,50 +202,32 @@ asmlinkage int irix_ioctl(int fd, unsigned long cmd, unsigned long arg)
 		break;
 
 	case 0x8004667e:
-#ifdef DEBUG_IOCTLS
-		printk("FIONBIO, %08lx) arg=%d ", arg, *(int *)arg);
-#endif
 		error = sys_ioctl(fd, FIONBIO, arg);
 		break;
 
 	case 0x80047476:
-#ifdef DEBUG_IOCTLS
-		printk("TIOCSPGRP, %08lx) arg=%d ", arg, *(int *)arg);
-#endif
 		error = sys_ioctl(fd, TIOCSPGRP, arg);
 		break;
 
 	case 0x8020690c:
-#ifdef DEBUG_IOCTLS
-		printk("SIOCSIFADDR, %08lx) arg=%d ", arg, *(int *)arg);
-#endif
 		error = sys_ioctl(fd, SIOCSIFADDR, arg);
 		break;
 
 	case 0x80206910:
-#ifdef DEBUG_IOCTLS
-		printk("SIOCSIFFLAGS, %08lx) arg=%d ", arg, *(int *)arg);
-#endif
 		error = sys_ioctl(fd, SIOCSIFFLAGS, arg);
 		break;
 
 	case 0xc0206911:
-#ifdef DEBUG_IOCTLS
-		printk("SIOCGIFFLAGS, %08lx) arg=%d ", arg, *(int *)arg);
-#endif
 		error = sys_ioctl(fd, SIOCGIFFLAGS, arg);
 		break;
 
 	case 0xc020691b:
-#ifdef DEBUG_IOCTLS
-		printk("SIOCGIFMETRIC, %08lx) arg=%d ", arg, *(int *)arg);
-#endif
 		error = sys_ioctl(fd, SIOCGIFMETRIC, arg);
 		break;
 
 	default: {
 #ifdef DEBUG_MISSING_IOCTL
-		char *msg = "Unimplemented IOCTL cmd tell linux@engr.sgi.com\n";
+		char *msg = "Unimplemented IOCTL cmd tell linux-mips@linux-mips.org\n";
 
 #ifdef DEBUG_IOCTLS
 		printk("UNIMP_IOCTL, %08lx)\n", arg);
diff --git a/arch/mips/kernel/irixsig.c b/arch/mips/kernel/irixsig.c
index eff89322ba50..08273a2a501d 100644
--- a/arch/mips/kernel/irixsig.c
+++ b/arch/mips/kernel/irixsig.c
@@ -76,36 +76,39 @@ static inline void dump_irix5_sigctx(struct sigctx_irix5 *c)
 }
 #endif
 
-static void setup_irix_frame(struct k_sigaction *ka, struct pt_regs *regs,
-			     int signr, sigset_t *oldmask)
+static int setup_irix_frame(struct k_sigaction *ka, struct pt_regs *regs,
+			    int signr, sigset_t *oldmask)
 {
+	struct sigctx_irix5 __user *ctx;
 	unsigned long sp;
-	struct sigctx_irix5 *ctx;
-	int i;
+	int error, i;
 
 	sp = regs->regs[29];
 	sp -= sizeof(struct sigctx_irix5);
 	sp &= ~(0xf);
-	ctx = (struct sigctx_irix5 *) sp;
+	ctx = (struct sigctx_irix5 __user *) sp;
 	if (!access_ok(VERIFY_WRITE, ctx, sizeof(*ctx)))
 		goto segv_and_exit;
 
-	__put_user(0, &ctx->weird_fpu_thing);
-	__put_user(~(0x00000001), &ctx->rmask);
-	__put_user(0, &ctx->regs[0]);
+	error = __put_user(0, &ctx->weird_fpu_thing);
+	error |= __put_user(~(0x00000001), &ctx->rmask);
+	error |= __put_user(0, &ctx->regs[0]);
 	for(i = 1; i < 32; i++)
-		__put_user((u64) regs->regs[i], &ctx->regs[i]);
+		error |= __put_user((u64) regs->regs[i], &ctx->regs[i]);
+
+	error |= __put_user((u64) regs->hi, &ctx->hi);
+	error |= __put_user((u64) regs->lo, &ctx->lo);
+	error |= __put_user((u64) regs->cp0_epc, &ctx->pc);
+	error |= __put_user(!!used_math(), &ctx->usedfp);
+	error |= __put_user((u64) regs->cp0_cause, &ctx->cp0_cause);
+	error |= __put_user((u64) regs->cp0_badvaddr, &ctx->cp0_badvaddr);
 
-	__put_user((u64) regs->hi, &ctx->hi);
-	__put_user((u64) regs->lo, &ctx->lo);
-	__put_user((u64) regs->cp0_epc, &ctx->pc);
-	__put_user(!!used_math(), &ctx->usedfp);
-	__put_user((u64) regs->cp0_cause, &ctx->cp0_cause);
-	__put_user((u64) regs->cp0_badvaddr, &ctx->cp0_badvaddr);
+	error |= __put_user(0, &ctx->sstk_flags); /* XXX sigstack unimp... todo... */
 
-	__put_user(0, &ctx->sstk_flags); /* XXX sigstack unimp... todo... */
+	error |= __copy_to_user(&ctx->sigset, oldmask, sizeof(irix_sigset_t)) ? -EFAULT : 0;
 
-	__copy_to_user(&ctx->sigset, oldmask, sizeof(irix_sigset_t));
+	if (error)
+		goto segv_and_exit;
 
 #ifdef DEBUG_SIG
 	dump_irix5_sigctx(ctx);
@@ -117,13 +120,14 @@ static void setup_irix_frame(struct k_sigaction *ka, struct pt_regs *regs,
 	regs->regs[7] = (unsigned long) ka->sa.sa_handler;
 	regs->regs[25] = regs->cp0_epc = (unsigned long) ka->sa_restorer;
 
-	return;
+	return 1;
 
 segv_and_exit:
 	force_sigsegv(signr, current);
+	return 0;
 }
 
-static void inline
+static int inline
 setup_irix_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
                int signr, sigset_t *oldmask, siginfo_t *info)
 {
@@ -131,9 +135,11 @@ setup_irix_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
 	do_exit(SIGSEGV);
 }
 
-static inline void handle_signal(unsigned long sig, siginfo_t *info,
+static inline int handle_signal(unsigned long sig, siginfo_t *info,
 	struct k_sigaction *ka, sigset_t *oldset, struct pt_regs * regs)
 {
+	int ret;
+
 	switch(regs->regs[0]) {
 	case ERESTARTNOHAND:
 		regs->regs[2] = EINTR;
@@ -151,9 +157,9 @@ static inline void handle_signal(unsigned long sig, siginfo_t *info,
 	regs->regs[0] = 0;		/* Don't deal with this again.  */
 
 	if (ka->sa.sa_flags & SA_SIGINFO)
-		setup_irix_rt_frame(ka, regs, sig, oldset, info);
+		ret = setup_irix_rt_frame(ka, regs, sig, oldset, info);
 	else
-		setup_irix_frame(ka, regs, sig, oldset);
+		ret = setup_irix_frame(ka, regs, sig, oldset);
 
 	spin_lock_irq(&current->sighand->siglock);
 	sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
@@ -161,6 +167,8 @@ static inline void handle_signal(unsigned long sig, siginfo_t *info,
 		sigaddset(&current->blocked,sig);
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
+
+	return ret;
 }
 
 asmlinkage int do_irix_signal(sigset_t *oldset, struct pt_regs *regs)
@@ -184,10 +192,8 @@ asmlinkage int do_irix_signal(sigset_t *oldset, struct pt_regs *regs)
 		oldset = &current->blocked;
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
-	if (signr > 0) {
-		handle_signal(signr, &info, &ka, oldset, regs);
-		return 1;
-	}
+	if (signr > 0)
+		return handle_signal(signr, &info, &ka, oldset, regs);
 
 no_signal:
 	/*
@@ -208,10 +214,11 @@ no_signal:
 asmlinkage void
 irix_sigreturn(struct pt_regs *regs)
 {
-	struct sigctx_irix5 *context, *magic;
+	struct sigctx_irix5 __user *context, *magic;
 	unsigned long umask, mask;
 	u64 *fregs;
-	int sig, i, base = 0;
+	u32 usedfp;
+	int error, sig, i, base = 0;
 	sigset_t blocked;
 
 	/* Always make any pending restarted system calls return -EINTR */
@@ -220,8 +227,8 @@ irix_sigreturn(struct pt_regs *regs)
 	if (regs->regs[2] == 1000)
 		base = 1;
 
-	context = (struct sigctx_irix5 *) regs->regs[base + 4];
-	magic = (struct sigctx_irix5 *) regs->regs[base + 5];
+	context = (struct sigctx_irix5 __user *) regs->regs[base + 4];
+	magic = (struct sigctx_irix5 __user *) regs->regs[base + 5];
 	sig = (int) regs->regs[base + 6];
 #ifdef DEBUG_SIG
 	printk("[%s:%d] IRIX sigreturn(scp[%p],ucp[%p],sig[%d])\n",
@@ -236,25 +243,31 @@ irix_sigreturn(struct pt_regs *regs)
 	dump_irix5_sigctx(context);
 #endif
 
-	__get_user(regs->cp0_epc, &context->pc);
-	umask = context->rmask; mask = 2;
+	error = __get_user(regs->cp0_epc, &context->pc);
+	error |= __get_user(umask, &context->rmask);
+
+	mask = 2;
 	for (i = 1; i < 32; i++, mask <<= 1) {
-		if(umask & mask)
-			__get_user(regs->regs[i], &context->regs[i]);
+		if (umask & mask)
+			error |= __get_user(regs->regs[i], &context->regs[i]);
 	}
-	__get_user(regs->hi, &context->hi);
-	__get_user(regs->lo, &context->lo);
+	error |= __get_user(regs->hi, &context->hi);
+	error |= __get_user(regs->lo, &context->lo);
 
-	if ((umask & 1) && context->usedfp) {
+	error |= __get_user(usedfp, &context->usedfp);
+	if ((umask & 1) && usedfp) {
 		fregs = (u64 *) &current->thread.fpu;
+
 		for(i = 0; i < 32; i++)
-			fregs[i] = (u64) context->fpregs[i];
-		__get_user(current->thread.fpu.hard.fcr31, &context->fpcsr);
+			error |= __get_user(fregs[i], &context->fpregs[i]);
+		error |= __get_user(current->thread.fpu.hard.fcr31, &context->fpcsr);
 	}
 
 	/* XXX do sigstack crapola here... XXX */
 
-	if (__copy_from_user(&blocked, &context->sigset, sizeof(blocked)))
+	error |= __copy_from_user(&blocked, &context->sigset, sizeof(blocked)) ? -EFAULT : 0;
+
+	if (error)
 		goto badframe;
 
 	sigdelsetmask(&blocked, ~_BLOCKABLE);
@@ -266,8 +279,6 @@ irix_sigreturn(struct pt_regs *regs)
 	/*
 	 * Don't let your children do this ...
 	 */
-	if (current_thread_info()->flags & TIF_SYSCALL_TRACE)
-		do_syscall_trace(regs, 1);
 	__asm__ __volatile__(
 		"move\t$29,%0\n\t"
 		"j\tsyscall_exit"
@@ -296,8 +307,8 @@ static inline void dump_sigact_irix5(struct sigact_irix5 *p)
 #endif
 
 asmlinkage int
-irix_sigaction(int sig, const struct sigaction *act,
-	      struct sigaction *oact, void *trampoline)
+irix_sigaction(int sig, const struct sigaction __user *act,
+	      struct sigaction __user *oact, void __user *trampoline)
 {
 	struct k_sigaction new_ka, old_ka;
 	int ret;
@@ -311,12 +322,16 @@ irix_sigaction(int sig, const struct sigaction *act,
 #endif
 	if (act) {
 		sigset_t mask;
-		if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
-		    __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
-		    __get_user(new_ka.sa.sa_flags, &act->sa_flags))
+		int err;
+
+		if (!access_ok(VERIFY_READ, act, sizeof(*act)))
 			return -EFAULT;
+		err = __get_user(new_ka.sa.sa_handler, &act->sa_handler);
+		err |= __get_user(new_ka.sa.sa_flags, &act->sa_flags);
 
-		__copy_from_user(&mask, &act->sa_mask, sizeof(sigset_t));
+		err |= __copy_from_user(&mask, &act->sa_mask, sizeof(sigset_t)) ? -EFAULT : 0;
+		if (err)
+			return err;
 
 		/*
 		 * Hmmm... methinks IRIX libc always passes a valid trampoline
@@ -330,30 +345,37 @@ irix_sigaction(int sig, const struct sigaction *act,
 	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
 
 	if (!ret && oact) {
-		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
-		    __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
-		    __put_user(old_ka.sa.sa_flags, &oact->sa_flags))
+		int err;
+
+		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)))
+			return -EFAULT;
+
+		err = __put_user(old_ka.sa.sa_handler, &oact->sa_handler);
+		err |= __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
+		err |= __copy_to_user(&oact->sa_mask, &old_ka.sa.sa_mask,
+		               sizeof(sigset_t)) ? -EFAULT : 0;
+		if (err)
 			return -EFAULT;
-		__copy_to_user(&old_ka.sa.sa_mask, &oact->sa_mask,
-		               sizeof(sigset_t));
 	}
 
 	return ret;
 }
 
-asmlinkage int irix_sigpending(irix_sigset_t *set)
+asmlinkage int irix_sigpending(irix_sigset_t __user *set)
 {
 	return do_sigpending(set, sizeof(*set));
 }
 
-asmlinkage int irix_sigprocmask(int how, irix_sigset_t *new, irix_sigset_t *old)
+asmlinkage int irix_sigprocmask(int how, irix_sigset_t __user *new,
+	irix_sigset_t __user *old)
 {
 	sigset_t oldbits, newbits;
 
 	if (new) {
 		if (!access_ok(VERIFY_READ, new, sizeof(*new)))
 			return -EFAULT;
-		__copy_from_user(&newbits, new, sizeof(unsigned long)*4);
+		if (__copy_from_user(&newbits, new, sizeof(unsigned long)*4))
+			return -EFAULT;
 		sigdelsetmask(&newbits, ~_BLOCKABLE);
 
 		spin_lock_irq(&current->sighand->siglock);
@@ -381,20 +403,19 @@ asmlinkage int irix_sigprocmask(int how, irix_sigset_t *new, irix_sigset_t *old)
 		recalc_sigpending();
 		spin_unlock_irq(&current->sighand->siglock);
 	}
-	if(old) {
-		if (!access_ok(VERIFY_WRITE, old, sizeof(*old)))
-			return -EFAULT;
-		__copy_to_user(old, &current->blocked, sizeof(unsigned long)*4);
-	}
+	if (old)
+		return copy_to_user(old, &current->blocked,
+		                  sizeof(unsigned long)*4) ? -EFAULT : 0;
 
 	return 0;
 }
 
 asmlinkage int irix_sigsuspend(struct pt_regs *regs)
 {
-	sigset_t *uset, saveset, newset;
+	sigset_t saveset, newset;
+	sigset_t __user *uset;
 
-	uset = (sigset_t *) regs->regs[4];
+	uset = (sigset_t __user *) regs->regs[4];
 	if (copy_from_user(&newset, uset, sizeof(sigset_t)))
 		return -EFAULT;
 	sigdelsetmask(&newset, ~_BLOCKABLE);
@@ -440,12 +461,13 @@ struct irix5_siginfo {
 	} stuff;
 };
 
-asmlinkage int irix_sigpoll_sys(unsigned long *set, struct irix5_siginfo *info,
-				struct timespec *tp)
+asmlinkage int irix_sigpoll_sys(unsigned long __user *set,
+	struct irix5_siginfo __user *info, struct timespec __user *tp)
 {
 	long expire = MAX_SCHEDULE_TIMEOUT;
 	sigset_t kset;
 	int i, sig, error, timeo = 0;
+	struct timespec ktp;
 
 #ifdef DEBUG_SIG
 	printk("[%s:%d] irix_sigpoll_sys(%p,%p,%p)\n",
@@ -456,14 +478,8 @@ asmlinkage int irix_sigpoll_sys(unsigned long *set, struct irix5_siginfo *info,
 	if (!set)
 		return -EINVAL;
 
-	if (!access_ok(VERIFY_READ, set, sizeof(kset))) {
-		error = -EFAULT;
-		goto out;
-	}
-
-	__copy_from_user(&kset, set, sizeof(set));
-	if (error)
-		goto out;
+	if (copy_from_user(&kset, set, sizeof(set)))
+		return -EFAULT;
 
 	if (info && clear_user(info, sizeof(*info))) {
 		error = -EFAULT;
@@ -471,13 +487,14 @@ asmlinkage int irix_sigpoll_sys(unsigned long *set, struct irix5_siginfo *info,
 	}
 
 	if (tp) {
-		if (!access_ok(VERIFY_READ, tp, sizeof(*tp)))
+		if (copy_from_user(&ktp, tp, sizeof(*tp)))
 			return -EFAULT;
-		if (!tp->tv_sec && !tp->tv_nsec) {
-			error = -EINVAL;
-			goto out;
-		}
-		expire = timespec_to_jiffies(tp) + (tp->tv_sec||tp->tv_nsec);
+
+		if (!ktp.tv_sec && !ktp.tv_nsec)
+			return -EINVAL;
+
+		expire = timespec_to_jiffies(&ktp) +
+		         (ktp.tv_sec || ktp.tv_nsec);
 	}
 
 	while(1) {
@@ -500,15 +517,14 @@ asmlinkage int irix_sigpoll_sys(unsigned long *set, struct irix5_siginfo *info,
 	if (timeo)
 		return -EAGAIN;
 
-	for(sig = 1; i <= 65 /* IRIX_NSIG */; sig++) {
+	for (sig = 1; i <= 65 /* IRIX_NSIG */; sig++) {
 		if (sigismember (&kset, sig))
 			continue;
 		if (sigismember (&current->pending.signal, sig)) {
 			/* XXX need more than this... */
 			if (info)
-				info->sig = sig;
-			error = 0;
-			goto out;
+				return copy_to_user(&info->sig, &sig, sizeof(sig));
+			return 0;
 		}
 	}
 
@@ -534,8 +550,9 @@ extern int getrusage(struct task_struct *, int, struct rusage __user *);
 
 #define W_MASK      (W_EXITED | W_TRAPPED | W_STOPPED | W_CONT | W_NOHANG)
 
-asmlinkage int irix_waitsys(int type, int pid, struct irix5_siginfo *info,
-			    int options, struct rusage *ru)
+asmlinkage int irix_waitsys(int type, int pid,
+	struct irix5_siginfo __user *info, int options,
+	struct rusage __user *ru)
 {
 	int flag, retval;
 	DECLARE_WAITQUEUE(wait, current);
@@ -543,28 +560,22 @@ asmlinkage int irix_waitsys(int type, int pid, struct irix5_siginfo *info,
 	struct task_struct *p;
 	struct list_head *_p;
 
-	if (!info) {
-		retval = -EINVAL;
-		goto out;
-	}
-	if (!access_ok(VERIFY_WRITE, info, sizeof(*info))) {
-		retval = -EFAULT;
-		goto out;
-	}
-	if (ru) {
-		if (!access_ok(VERIFY_WRITE, ru, sizeof(*ru))) {
-			retval = -EFAULT;
-			goto out;
-		}
-	}
-	if (options & ~(W_MASK)) {
-		retval = -EINVAL;
-		goto out;
-	}
-	if (type != IRIX_P_PID && type != IRIX_P_PGID && type != IRIX_P_ALL) {
-		retval = -EINVAL;
-		goto out;
-	}
+	if (!info)
+		return -EINVAL;
+
+	if (!access_ok(VERIFY_WRITE, info, sizeof(*info)))
+		return -EFAULT;
+
+	if (ru)
+		if (!access_ok(VERIFY_WRITE, ru, sizeof(*ru)))
+			return -EFAULT;
+
+	if (options & ~W_MASK)
+		return -EINVAL;
+
+	if (type != IRIX_P_PID && type != IRIX_P_PGID && type != IRIX_P_ALL)
+		return -EINVAL;
+
 	add_wait_queue(&current->signal->wait_chldexit, &wait);
 repeat:
 	flag = 0;
@@ -595,18 +606,20 @@ repeat:
 			add_parent(p, p->parent);
 			write_unlock_irq(&tasklist_lock);
 			retval = ru ? getrusage(p, RUSAGE_BOTH, ru) : 0;
-			if (!retval && ru) {
-				retval |= __put_user(SIGCHLD, &info->sig);
-				retval |= __put_user(0, &info->code);
-				retval |= __put_user(p->pid, &info->stuff.procinfo.pid);
-				retval |= __put_user((p->exit_code >> 8) & 0xff,
-				           &info->stuff.procinfo.procdata.child.status);
-				retval |= __put_user(p->utime, &info->stuff.procinfo.procdata.child.utime);
-				retval |= __put_user(p->stime, &info->stuff.procinfo.procdata.child.stime);
-			}
-			if (!retval) {
-				p->exit_code = 0;
-			}
+			if (retval)
+				goto end_waitsys;
+
+			retval = __put_user(SIGCHLD, &info->sig);
+			retval |= __put_user(0, &info->code);
+			retval |= __put_user(p->pid, &info->stuff.procinfo.pid);
+			retval |= __put_user((p->exit_code >> 8) & 0xff,
+			           &info->stuff.procinfo.procdata.child.status);
+			retval |= __put_user(p->utime, &info->stuff.procinfo.procdata.child.utime);
+			retval |= __put_user(p->stime, &info->stuff.procinfo.procdata.child.stime);
+			if (retval)
+				goto end_waitsys;
+
+			p->exit_code = 0;
 			goto end_waitsys;
 
 		case EXIT_ZOMBIE:
@@ -614,16 +627,18 @@ repeat:
 			current->signal->cstime += p->stime + p->signal->cstime;
 			if (ru != NULL)
 				getrusage(p, RUSAGE_BOTH, ru);
-			__put_user(SIGCHLD, &info->sig);
-			__put_user(1, &info->code);      /* CLD_EXITED */
-			__put_user(p->pid, &info->stuff.procinfo.pid);
-			__put_user((p->exit_code >> 8) & 0xff,
+			retval = __put_user(SIGCHLD, &info->sig);
+			retval |= __put_user(1, &info->code);      /* CLD_EXITED */
+			retval |= __put_user(p->pid, &info->stuff.procinfo.pid);
+			retval |= __put_user((p->exit_code >> 8) & 0xff,
 			           &info->stuff.procinfo.procdata.child.status);
-			__put_user(p->utime,
+			retval |= __put_user(p->utime,
 			           &info->stuff.procinfo.procdata.child.utime);
-			__put_user(p->stime,
+			retval |= __put_user(p->stime,
 			           &info->stuff.procinfo.procdata.child.stime);
-			retval = 0;
+			if (retval)
+				return retval;
+
 			if (p->real_parent != p->parent) {
 				write_lock_irq(&tasklist_lock);
 				remove_parent(p);
@@ -656,7 +671,6 @@ end_waitsys:
 	current->state = TASK_RUNNING;
 	remove_wait_queue(&current->signal->wait_chldexit, &wait);
 
-out:
 	return retval;
 }
 
@@ -675,39 +689,39 @@ struct irix5_context {
 
 asmlinkage int irix_getcontext(struct pt_regs *regs)
 {
-	int i, base = 0;
-	struct irix5_context *ctx;
+	int error, i, base = 0;
+	struct irix5_context __user *ctx;
 	unsigned long flags;
 
 	if (regs->regs[2] == 1000)
 		base = 1;
-	ctx = (struct irix5_context *) regs->regs[base + 4];
+	ctx = (struct irix5_context __user *) regs->regs[base + 4];
 
 #ifdef DEBUG_SIG
 	printk("[%s:%d] irix_getcontext(%p)\n",
 	       current->comm, current->pid, ctx);
 #endif
 
-	if (!access_ok(VERIFY_WRITE, ctx, sizeof(*ctx)))
+	if (!access_ok(VERIFY_WRITE, ctx, sizeof(*ctx)));
 		return -EFAULT;
 
-	__put_user(current->thread.irix_oldctx, &ctx->link);
+	error = __put_user(current->thread.irix_oldctx, &ctx->link);
 
-	__copy_to_user(&ctx->sigmask, &current->blocked, sizeof(irix_sigset_t));
+	error |= __copy_to_user(&ctx->sigmask, &current->blocked, sizeof(irix_sigset_t)) ? -EFAULT : 0;
 
 	/* XXX Do sigstack stuff someday... */
-	__put_user(0, &ctx->stack.sp);
-	__put_user(0, &ctx->stack.size);
-	__put_user(0, &ctx->stack.flags);
+	error |= __put_user(0, &ctx->stack.sp);
+	error |= __put_user(0, &ctx->stack.size);
+	error |= __put_user(0, &ctx->stack.flags);
 
-	__put_user(0, &ctx->weird_graphics_thing);
-	__put_user(0, &ctx->regs[0]);
+	error |= __put_user(0, &ctx->weird_graphics_thing);
+	error |= __put_user(0, &ctx->regs[0]);
 	for (i = 1; i < 32; i++)
-		__put_user(regs->regs[i], &ctx->regs[i]);
-	__put_user(regs->lo, &ctx->regs[32]);
-	__put_user(regs->hi, &ctx->regs[33]);
-	__put_user(regs->cp0_cause, &ctx->regs[34]);
-	__put_user(regs->cp0_epc, &ctx->regs[35]);
+		error |= __put_user(regs->regs[i], &ctx->regs[i]);
+	error |= __put_user(regs->lo, &ctx->regs[32]);
+	error |= __put_user(regs->hi, &ctx->regs[33]);
+	error |= __put_user(regs->cp0_cause, &ctx->regs[34]);
+	error |= __put_user(regs->cp0_epc, &ctx->regs[35]);
 
 	flags = 0x0f;
 	if (!used_math()) {
@@ -716,119 +730,122 @@ asmlinkage int irix_getcontext(struct pt_regs *regs)
 		/* XXX wheee... */
 		printk("Wheee, no code for saving IRIX FPU context yet.\n");
 	}
-	__put_user(flags, &ctx->flags);
+	error |= __put_user(flags, &ctx->flags);
 
-	return 0;
+	return error;
 }
 
-asmlinkage unsigned long irix_setcontext(struct pt_regs *regs)
+asmlinkage void irix_setcontext(struct pt_regs *regs)
 {
-	int error, base = 0;
-	struct irix5_context *ctx;
+	struct irix5_context __user *ctx;
+	int err, base = 0;
+	u32 flags;
 
-	if(regs->regs[2] == 1000)
+	if (regs->regs[2] == 1000)
 		base = 1;
-	ctx = (struct irix5_context *) regs->regs[base + 4];
+	ctx = (struct irix5_context __user *) regs->regs[base + 4];
 
 #ifdef DEBUG_SIG
 	printk("[%s:%d] irix_setcontext(%p)\n",
 	       current->comm, current->pid, ctx);
 #endif
 
-	if (!access_ok(VERIFY_READ, ctx, sizeof(*ctx))) {
-		error = -EFAULT;
-		goto out;
-	}
+	if (!access_ok(VERIFY_READ, ctx, sizeof(*ctx)))
+		goto segv_and_exit;
 
-	if (ctx->flags & 0x02) {
+	err = __get_user(flags, &ctx->flags);
+	if (flags & 0x02) {
 		/* XXX sigstack garbage, todo... */
 		printk("Wheee, cannot do sigstack stuff in setcontext\n");
 	}
 
-	if (ctx->flags & 0x04) {
+	if (flags & 0x04) {
 		int i;
 
 		/* XXX extra control block stuff... todo... */
-		for(i = 1; i < 32; i++)
-			regs->regs[i] = ctx->regs[i];
-		regs->lo = ctx->regs[32];
-		regs->hi = ctx->regs[33];
-		regs->cp0_epc = ctx->regs[35];
+		for (i = 1; i < 32; i++)
+			err |= __get_user(regs->regs[i], &ctx->regs[i]);
+		err |= __get_user(regs->lo, &ctx->regs[32]);
+		err |= __get_user(regs->hi, &ctx->regs[33]);
+		err |= __get_user(regs->cp0_epc, &ctx->regs[35]);
 	}
 
-	if (ctx->flags & 0x08) {
+	if (flags & 0x08)
 		/* XXX fpu context, blah... */
-		printk("Wheee, cannot restore FPU context yet...\n");
-	}
-	current->thread.irix_oldctx = ctx->link;
-	error = regs->regs[2];
+		printk(KERN_ERR "Wheee, cannot restore FPU context yet...\n");
 
-out:
-	return error;
+	err |= __get_user(current->thread.irix_oldctx, &ctx->link);
+	if (err)
+		goto segv_and_exit;
+
+	/*
+	 * Don't let your children do this ...
+	 */
+	__asm__ __volatile__(
+		"move\t$29,%0\n\t"
+		"j\tsyscall_exit"
+		:/* no outputs */
+		:"r" (&regs));
+		/* Unreached */
+
+segv_and_exit:
+	force_sigsegv(SIGSEGV, current);
 }
 
-struct irix_sigstack { unsigned long sp; int status; };
+struct irix_sigstack {
+	unsigned long sp;
+	int status;
+};
 
-asmlinkage int irix_sigstack(struct irix_sigstack *new, struct irix_sigstack *old)
+asmlinkage int irix_sigstack(struct irix_sigstack __user *new,
+	struct irix_sigstack __user *old)
 {
-	int error = -EFAULT;
-
 #ifdef DEBUG_SIG
 	printk("[%s:%d] irix_sigstack(%p,%p)\n",
 	       current->comm, current->pid, new, old);
 #endif
-	if(new) {
+	if (new) {
 		if (!access_ok(VERIFY_READ, new, sizeof(*new)))
-			goto out;
+			return -EFAULT;
 	}
 
-	if(old) {
+	if (old) {
 		if (!access_ok(VERIFY_WRITE, old, sizeof(*old)))
-			goto out;
+			return -EFAULT;
 	}
-	error = 0;
 
-out:
-	return error;
+	return 0;
 }
 
 struct irix_sigaltstack { unsigned long sp; int size; int status; };
 
-asmlinkage int irix_sigaltstack(struct irix_sigaltstack *new,
-				struct irix_sigaltstack *old)
+asmlinkage int irix_sigaltstack(struct irix_sigaltstack __user *new,
+				struct irix_sigaltstack __user *old)
 {
-	int error = -EFAULT;
-
 #ifdef DEBUG_SIG
 	printk("[%s:%d] irix_sigaltstack(%p,%p)\n",
 	       current->comm, current->pid, new, old);
 #endif
-	if (new) {
+	if (new)
 		if (!access_ok(VERIFY_READ, new, sizeof(*new)))
-			goto out;
-	}
+			return -EFAULT;
 
 	if (old) {
 		if (!access_ok(VERIFY_WRITE, old, sizeof(*old)))
-			goto out;
+			return -EFAULT;
 	}
-	error = 0;
-
-out:
-	error = 0;
 
-	return error;
+	return 0;
 }
 
 struct irix_procset {
 	int cmd, ltype, lid, rtype, rid;
 };
 
-asmlinkage int irix_sigsendset(struct irix_procset *pset, int sig)
+asmlinkage int irix_sigsendset(struct irix_procset __user *pset, int sig)
 {
 	if (!access_ok(VERIFY_READ, pset, sizeof(*pset)))
 		return -EFAULT;
-
 #ifdef DEBUG_SIG
 	printk("[%s:%d] irix_sigsendset([%d,%d,%d,%d,%d],%d)\n",
 	       current->comm, current->pid,
diff --git a/arch/mips/kernel/irq-msc01.c b/arch/mips/kernel/irq-msc01.c
index 43c00ac0b88d..3f653c7cfbf3 100644
--- a/arch/mips/kernel/irq-msc01.c
+++ b/arch/mips/kernel/irq-msc01.c
@@ -74,7 +74,7 @@ static void disable_msc_irq(unsigned int irq)
 static void level_mask_and_ack_msc_irq(unsigned int irq)
 {
 	mask_msc_irq(irq);
-	if (!cpu_has_ei)
+	if (!cpu_has_veic)
 		MSCIC_WRITE(MSC01_IC_EOI, 0);
 }
 
@@ -84,7 +84,7 @@ static void level_mask_and_ack_msc_irq(unsigned int irq)
 static void edge_mask_and_ack_msc_irq(unsigned int irq)
 {
 	mask_msc_irq(irq);
-	if (!cpu_has_ei)
+	if (!cpu_has_veic)
 		MSCIC_WRITE(MSC01_IC_EOI, 0);
 	else {
 		u32 r;
@@ -129,25 +129,23 @@ msc_bind_eic_interrupt (unsigned int irq, unsigned int set)
 #define shutdown_msc_irq	disable_msc_irq
 
 struct hw_interrupt_type msc_levelirq_type = {
-	"SOC-it-Level",
-	startup_msc_irq,
-	shutdown_msc_irq,
-	enable_msc_irq,
-	disable_msc_irq,
-	level_mask_and_ack_msc_irq,
-	end_msc_irq,
-	NULL
+	.typename = "SOC-it-Level",
+	.startup = startup_msc_irq,
+	.shutdown = shutdown_msc_irq,
+	.enable = enable_msc_irq,
+	.disable = disable_msc_irq,
+	.ack = level_mask_and_ack_msc_irq,
+	.end = end_msc_irq,
 };
 
 struct hw_interrupt_type msc_edgeirq_type = {
-	"SOC-it-Edge",
-	startup_msc_irq,
-	shutdown_msc_irq,
-	enable_msc_irq,
-	disable_msc_irq,
-	edge_mask_and_ack_msc_irq,
-	end_msc_irq,
-	NULL
+	.typename = "SOC-it-Edge",
+	.startup =startup_msc_irq,
+	.shutdown = shutdown_msc_irq,
+	.enable = enable_msc_irq,
+	.disable = disable_msc_irq,
+	.ack = edge_mask_and_ack_msc_irq,
+	.end = end_msc_irq,
 };
 
 
@@ -168,14 +166,14 @@ void __init init_msc_irqs(unsigned int base, msc_irqmap_t *imp, int nirq)
 		switch (imp->im_type) {
 		case MSC01_IRQ_EDGE:
 			irq_desc[base+n].handler = &msc_edgeirq_type;
-			if (cpu_has_ei)
+			if (cpu_has_veic)
 				MSCIC_WRITE(MSC01_IC_SUP+n*8, MSC01_IC_SUP_EDGE_BIT);
 			else
 				MSCIC_WRITE(MSC01_IC_SUP+n*8, MSC01_IC_SUP_EDGE_BIT | imp->im_lvl);
 			break;
 		case MSC01_IRQ_LEVEL:
 			irq_desc[base+n].handler = &msc_levelirq_type;
-			if (cpu_has_ei)
+			if (cpu_has_veic)
 				MSCIC_WRITE(MSC01_IC_SUP+n*8, 0);
 			else
 				MSCIC_WRITE(MSC01_IC_SUP+n*8, imp->im_lvl);
diff --git a/arch/mips/kernel/irq-mv6434x.c b/arch/mips/kernel/irq-mv6434x.c
index 088bbbc869e6..0ac067f45cf5 100644
--- a/arch/mips/kernel/irq-mv6434x.c
+++ b/arch/mips/kernel/irq-mv6434x.c
@@ -135,14 +135,13 @@ void ll_mv64340_irq(struct pt_regs *regs)
 #define shutdown_mv64340_irq	disable_mv64340_irq
 
 struct hw_interrupt_type mv64340_irq_type = {
-	"MV-64340",
-	startup_mv64340_irq,
-	shutdown_mv64340_irq,
-	enable_mv64340_irq,
-	disable_mv64340_irq,
-	mask_and_ack_mv64340_irq,
-	end_mv64340_irq,
-	NULL
+	.typename = "MV-64340",
+	.startup = startup_mv64340_irq,
+	.shutdown = shutdown_mv64340_irq,
+	.enable = enable_mv64340_irq,
+	.disable = disable_mv64340_irq,
+	.ack = mask_and_ack_mv64340_irq,
+	.end = end_mv64340_irq,
 };
 
 void __init mv64340_irq_init(unsigned int base)
diff --git a/arch/mips/kernel/irq-rm7000.c b/arch/mips/kernel/irq-rm7000.c
index f5d779fd0355..0b130c5ac5d9 100644
--- a/arch/mips/kernel/irq-rm7000.c
+++ b/arch/mips/kernel/irq-rm7000.c
@@ -72,13 +72,13 @@ static void rm7k_cpu_irq_end(unsigned int irq)
 }
 
 static hw_irq_controller rm7k_irq_controller = {
-	"RM7000",
-	rm7k_cpu_irq_startup,
-	rm7k_cpu_irq_shutdown,
-	rm7k_cpu_irq_enable,
-	rm7k_cpu_irq_disable,
-	rm7k_cpu_irq_ack,
-	rm7k_cpu_irq_end,
+	.typename = "RM7000",
+	.startup = rm7k_cpu_irq_startup,
+	.shutdown = rm7k_cpu_irq_shutdown,
+	.enable = rm7k_cpu_irq_enable,
+	.disable = rm7k_cpu_irq_disable,
+	.ack = rm7k_cpu_irq_ack,
+	.end = rm7k_cpu_irq_end,
 };
 
 void __init rm7k_cpu_irq_init(int base)
diff --git a/arch/mips/kernel/irq-rm9000.c b/arch/mips/kernel/irq-rm9000.c
index bdd130296256..9b5f20c32acb 100644
--- a/arch/mips/kernel/irq-rm9000.c
+++ b/arch/mips/kernel/irq-rm9000.c
@@ -106,23 +106,23 @@ static void rm9k_cpu_irq_end(unsigned int irq)
 }
 
 static hw_irq_controller rm9k_irq_controller = {
-	"RM9000",
-	rm9k_cpu_irq_startup,
-	rm9k_cpu_irq_shutdown,
-	rm9k_cpu_irq_enable,
-	rm9k_cpu_irq_disable,
-	rm9k_cpu_irq_ack,
-	rm9k_cpu_irq_end,
+	.typename = "RM9000",
+	.startup = rm9k_cpu_irq_startup,
+	.shutdown = rm9k_cpu_irq_shutdown,
+	.enable = rm9k_cpu_irq_enable,
+	.disable = rm9k_cpu_irq_disable,
+	.ack = rm9k_cpu_irq_ack,
+	.end = rm9k_cpu_irq_end,
 };
 
 static hw_irq_controller rm9k_perfcounter_irq = {
-	"RM9000",
-	rm9k_perfcounter_irq_startup,
-	rm9k_perfcounter_irq_shutdown,
-	rm9k_cpu_irq_enable,
-	rm9k_cpu_irq_disable,
-	rm9k_cpu_irq_ack,
-	rm9k_cpu_irq_end,
+	.typename = "RM9000",
+	.startup = rm9k_perfcounter_irq_startup,
+	.shutdown = rm9k_perfcounter_irq_shutdown,
+	.enable = rm9k_cpu_irq_enable,
+	.disable = rm9k_cpu_irq_disable,
+	.ack = rm9k_cpu_irq_ack,
+	.end = rm9k_cpu_irq_end,
 };
 
 unsigned int rm9000_perfcount_irq;
diff --git a/arch/mips/kernel/irq_cpu.c b/arch/mips/kernel/irq_cpu.c
index 2b936cf1ef70..5db67e31ec1a 100644
--- a/arch/mips/kernel/irq_cpu.c
+++ b/arch/mips/kernel/irq_cpu.c
@@ -3,6 +3,8 @@
  * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
  *
  * Copyright (C) 2001 Ralf Baechle
+ * Copyright (C) 2005  MIPS Technologies, Inc.  All rights reserved.
+ *      Author: Maciej W. Rozycki <macro@mips.com>
  *
  * This file define the irq handler for MIPS CPU interrupts.
  *
@@ -31,19 +33,21 @@
 
 #include <asm/irq_cpu.h>
 #include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
 #include <asm/system.h>
 
 static int mips_cpu_irq_base;
 
 static inline void unmask_mips_irq(unsigned int irq)
 {
-	clear_c0_cause(0x100 << (irq - mips_cpu_irq_base));
 	set_c0_status(0x100 << (irq - mips_cpu_irq_base));
+	irq_enable_hazard();
 }
 
 static inline void mask_mips_irq(unsigned int irq)
 {
 	clear_c0_status(0x100 << (irq - mips_cpu_irq_base));
+	irq_disable_hazard();
 }
 
 static inline void mips_cpu_irq_enable(unsigned int irq)
@@ -52,6 +56,7 @@ static inline void mips_cpu_irq_enable(unsigned int irq)
 
 	local_irq_save(flags);
 	unmask_mips_irq(irq);
+	back_to_back_c0_hazard();
 	local_irq_restore(flags);
 }
 
@@ -61,6 +66,7 @@ static void mips_cpu_irq_disable(unsigned int irq)
 
 	local_irq_save(flags);
 	mask_mips_irq(irq);
+	back_to_back_c0_hazard();
 	local_irq_restore(flags);
 }
 
@@ -71,7 +77,7 @@ static unsigned int mips_cpu_irq_startup(unsigned int irq)
 	return 0;
 }
 
-#define	mips_cpu_irq_shutdown	mips_cpu_irq_disable
+#define	mips_cpu_irq_shutdown		mips_cpu_irq_disable
 
 /*
  * While we ack the interrupt interrupts are disabled and thus we don't need
@@ -79,9 +85,6 @@ static unsigned int mips_cpu_irq_startup(unsigned int irq)
  */
 static void mips_cpu_irq_ack(unsigned int irq)
 {
-	/* Only necessary for soft interrupts */
-	clear_c0_cause(0x100 << (irq - mips_cpu_irq_base));
-
 	mask_mips_irq(irq);
 }
 
@@ -92,22 +95,82 @@ static void mips_cpu_irq_end(unsigned int irq)
 }
 
 static hw_irq_controller mips_cpu_irq_controller = {
-	"MIPS",
-	mips_cpu_irq_startup,
-	mips_cpu_irq_shutdown,
-	mips_cpu_irq_enable,
-	mips_cpu_irq_disable,
-	mips_cpu_irq_ack,
-	mips_cpu_irq_end,
-	NULL			/* no affinity stuff for UP */
+	.typename	= "MIPS",
+	.startup	= mips_cpu_irq_startup,
+	.shutdown	= mips_cpu_irq_shutdown,
+	.enable		= mips_cpu_irq_enable,
+	.disable	= mips_cpu_irq_disable,
+	.ack		= mips_cpu_irq_ack,
+	.end		= mips_cpu_irq_end,
 };
 
+/*
+ * Basically the same as above but taking care of all the MT stuff
+ */
+
+#define unmask_mips_mt_irq	unmask_mips_irq
+#define mask_mips_mt_irq	mask_mips_irq
+#define mips_mt_cpu_irq_enable	mips_cpu_irq_enable
+#define mips_mt_cpu_irq_disable	mips_cpu_irq_disable
+
+static unsigned int mips_mt_cpu_irq_startup(unsigned int irq)
+{
+	unsigned int vpflags = dvpe();
+
+	clear_c0_cause(0x100 << (irq - mips_cpu_irq_base));
+	evpe(vpflags);
+	mips_mt_cpu_irq_enable(irq);
+
+	return 0;
+}
+
+#define	mips_mt_cpu_irq_shutdown	mips_mt_cpu_irq_disable
+
+/*
+ * While we ack the interrupt interrupts are disabled and thus we don't need
+ * to deal with concurrency issues.  Same for mips_cpu_irq_end.
+ */
+static void mips_mt_cpu_irq_ack(unsigned int irq)
+{
+	unsigned int vpflags = dvpe();
+	clear_c0_cause(0x100 << (irq - mips_cpu_irq_base));
+	evpe(vpflags);
+	mask_mips_mt_irq(irq);
+}
+
+#define mips_mt_cpu_irq_end mips_cpu_irq_end
+
+static hw_irq_controller mips_mt_cpu_irq_controller = {
+	.typename	= "MIPS",
+	.startup	= mips_mt_cpu_irq_startup,
+	.shutdown	= mips_mt_cpu_irq_shutdown,
+	.enable		= mips_mt_cpu_irq_enable,
+	.disable	= mips_mt_cpu_irq_disable,
+	.ack		= mips_mt_cpu_irq_ack,
+	.end		= mips_mt_cpu_irq_end,
+};
 
 void __init mips_cpu_irq_init(int irq_base)
 {
 	int i;
 
-	for (i = irq_base; i < irq_base + 8; i++) {
+	/* Mask interrupts. */
+	clear_c0_status(ST0_IM);
+	clear_c0_cause(CAUSEF_IP);
+
+	/*
+	 * Only MT is using the software interrupts currently, so we just
+	 * leave them uninitialized for other processors.
+	 */
+	if (cpu_has_mipsmt)
+		for (i = irq_base; i < irq_base + 2; i++) {
+			irq_desc[i].status = IRQ_DISABLED;
+			irq_desc[i].action = NULL;
+			irq_desc[i].depth = 1;
+			irq_desc[i].handler = &mips_mt_cpu_irq_controller;
+		}
+
+	for (i = irq_base + 2; i < irq_base + 8; i++) {
 		irq_desc[i].status = IRQ_DISABLED;
 		irq_desc[i].action = NULL;
 		irq_desc[i].depth = 1;
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index ece4564919d8..330cf84d21fe 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -215,81 +215,32 @@ sys32_readdir(unsigned int fd, void * dirent32, unsigned int count)
 	return(n);
 }
 
-struct rusage32 {
-        struct compat_timeval ru_utime;
-        struct compat_timeval ru_stime;
-        int    ru_maxrss;
-        int    ru_ixrss;
-        int    ru_idrss;
-        int    ru_isrss;
-        int    ru_minflt;
-        int    ru_majflt;
-        int    ru_nswap;
-        int    ru_inblock;
-        int    ru_oublock;
-        int    ru_msgsnd;
-        int    ru_msgrcv;
-        int    ru_nsignals;
-        int    ru_nvcsw;
-        int    ru_nivcsw;
-};
-
-static int
-put_rusage (struct rusage32 *ru, struct rusage *r)
+asmlinkage int
+sys32_waitpid(compat_pid_t pid, unsigned int *stat_addr, int options)
 {
-	int err;
-
-	if (!access_ok(VERIFY_WRITE, ru, sizeof *ru))
-		return -EFAULT;
-
-	err = __put_user (r->ru_utime.tv_sec, &ru->ru_utime.tv_sec);
-	err |= __put_user (r->ru_utime.tv_usec, &ru->ru_utime.tv_usec);
-	err |= __put_user (r->ru_stime.tv_sec, &ru->ru_stime.tv_sec);
-	err |= __put_user (r->ru_stime.tv_usec, &ru->ru_stime.tv_usec);
-	err |= __put_user (r->ru_maxrss, &ru->ru_maxrss);
-	err |= __put_user (r->ru_ixrss, &ru->ru_ixrss);
-	err |= __put_user (r->ru_idrss, &ru->ru_idrss);
-	err |= __put_user (r->ru_isrss, &ru->ru_isrss);
-	err |= __put_user (r->ru_minflt, &ru->ru_minflt);
-	err |= __put_user (r->ru_majflt, &ru->ru_majflt);
-	err |= __put_user (r->ru_nswap, &ru->ru_nswap);
-	err |= __put_user (r->ru_inblock, &ru->ru_inblock);
-	err |= __put_user (r->ru_oublock, &ru->ru_oublock);
-	err |= __put_user (r->ru_msgsnd, &ru->ru_msgsnd);
-	err |= __put_user (r->ru_msgrcv, &ru->ru_msgrcv);
-	err |= __put_user (r->ru_nsignals, &ru->ru_nsignals);
-	err |= __put_user (r->ru_nvcsw, &ru->ru_nvcsw);
-	err |= __put_user (r->ru_nivcsw, &ru->ru_nivcsw);
-
-	return err;
+	return compat_sys_wait4(pid, stat_addr, options, NULL);
 }
 
-asmlinkage int
-sys32_wait4(compat_pid_t pid, unsigned int * stat_addr, int options,
-	    struct rusage32 * ru)
+asmlinkage long
+sysn32_waitid(int which, compat_pid_t pid,
+	      siginfo_t __user *uinfo, int options,
+	      struct compat_rusage __user *uru)
 {
-	if (!ru)
-		return sys_wait4(pid, stat_addr, options, NULL);
-	else {
-		struct rusage r;
-		int ret;
-		unsigned int status;
-		mm_segment_t old_fs = get_fs();
+	struct rusage ru;
+	long ret;
+	mm_segment_t old_fs = get_fs();
 
-		set_fs(KERNEL_DS);
-		ret = sys_wait4(pid, stat_addr ? &status : NULL, options, &r);
-		set_fs(old_fs);
-		if (put_rusage (ru, &r)) return -EFAULT;
-		if (stat_addr && put_user (status, stat_addr))
-			return -EFAULT;
+	set_fs (KERNEL_DS);
+	ret = sys_waitid(which, pid, uinfo, options,
+			 uru ? (struct rusage __user *) &ru : NULL);
+	set_fs (old_fs);
+
+	if (ret < 0 || uinfo->si_signo == 0)
 		return ret;
-	}
-}
 
-asmlinkage int
-sys32_waitpid(compat_pid_t pid, unsigned int *stat_addr, int options)
-{
-	return sys32_wait4(pid, stat_addr, options, NULL);
+	if (uru)
+		ret = put_compat_rusage(&ru, uru);
+	return ret;
 }
 
 struct sysinfo32 {
@@ -1467,3 +1418,80 @@ asmlinkage long sys32_socketcall(int call, unsigned int *args32)
 	}
 	return err;
 }
+
+struct sigevent32 {
+	u32 sigev_value;
+	u32 sigev_signo;
+	u32 sigev_notify;
+	u32 payload[(64 / 4) - 3];
+};
+
+extern asmlinkage long
+sys_timer_create(clockid_t which_clock,
+		 struct sigevent __user *timer_event_spec,
+		 timer_t __user * created_timer_id);
+
+long
+sys32_timer_create(u32 clock, struct sigevent32 __user *se32, timer_t __user *timer_id)
+{
+	struct sigevent __user *p = NULL;
+	if (se32) {
+		struct sigevent se;
+		p = compat_alloc_user_space(sizeof(struct sigevent));
+		memset(&se, 0, sizeof(struct sigevent));
+		if (get_user(se.sigev_value.sival_int,  &se32->sigev_value) ||
+		    __get_user(se.sigev_signo, &se32->sigev_signo) ||
+		    __get_user(se.sigev_notify, &se32->sigev_notify) ||
+		    __copy_from_user(&se._sigev_un._pad, &se32->payload,
+				     sizeof(se32->payload)) ||
+		    copy_to_user(p, &se, sizeof(se)))
+			return -EFAULT;
+	}
+	return sys_timer_create(clock, p, timer_id);
+}
+
+asmlinkage long
+sysn32_rt_sigtimedwait(const sigset_t __user *uthese,
+		       siginfo_t __user *uinfo,
+		       const struct compat_timespec __user *uts32,
+		       size_t sigsetsize)
+{
+	struct timespec __user *uts = NULL;
+
+	if (uts32) {
+		struct timespec ts;
+		uts = compat_alloc_user_space(sizeof(struct timespec));
+		if (get_user(ts.tv_sec, &uts32->tv_sec) ||
+		    get_user(ts.tv_nsec, &uts32->tv_nsec) ||
+		    copy_to_user (uts, &ts, sizeof (ts)))
+			return -EFAULT;
+	}
+	return sys_rt_sigtimedwait(uthese, uinfo, uts, sigsetsize);
+}
+
+save_static_function(sys32_clone);
+__attribute_used__ noinline static int
+_sys32_clone(nabi_no_regargs struct pt_regs regs)
+{
+	unsigned long clone_flags;
+	unsigned long newsp;
+	int __user *parent_tidptr, *child_tidptr;
+
+	clone_flags = regs.regs[4];
+	newsp = regs.regs[5];
+	if (!newsp)
+		newsp = regs.regs[29];
+	parent_tidptr = (int *) regs.regs[6];
+
+	/* Use __dummy4 instead of getting it off the stack, so that
+	   syscall() works.  */
+	child_tidptr = (int __user *) __dummy4;
+	return do_fork(clone_flags, newsp, &regs, 0,
+	               parent_tidptr, child_tidptr);
+}
+
+extern asmlinkage void sys_set_thread_area(u32 addr);
+asmlinkage void sys32_set_thread_area(u32 addr)
+{
+	sys_set_thread_area(AA(addr));
+}
diff --git a/arch/mips/kernel/module-elf32.c b/arch/mips/kernel/module-elf32.c
deleted file mode 100644
index ffd216d6d6dc..000000000000
--- a/arch/mips/kernel/module-elf32.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- *  Copyright (C) 2001 Rusty Russell.
- *  Copyright (C) 2003, 2004 Ralf Baechle (ralf@linux-mips.org)
- */
-
-#undef DEBUG
-
-#include <linux/moduleloader.h>
-#include <linux/elf.h>
-#include <linux/vmalloc.h>
-#include <linux/slab.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-
-struct mips_hi16 {
-	struct mips_hi16 *next;
-	Elf32_Addr *addr;
-	Elf32_Addr value;
-};
-
-static struct mips_hi16 *mips_hi16_list;
-
-void *module_alloc(unsigned long size)
-{
-	if (size == 0)
-		return NULL;
-	return vmalloc(size);
-}
-
-
-/* Free memory returned from module_alloc */
-void module_free(struct module *mod, void *module_region)
-{
-	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
-}
-
-int module_frob_arch_sections(Elf_Ehdr *hdr,
-			      Elf_Shdr *sechdrs,
-			      char *secstrings,
-			      struct module *mod)
-{
-	return 0;
-}
-
-static int apply_r_mips_none(struct module *me, uint32_t *location,
-	Elf32_Addr v)
-{
-	return 0;
-}
-
-static int apply_r_mips_32(struct module *me, uint32_t *location,
-	Elf32_Addr v)
-{
-	*location += v;
-
-	return 0;
-}
-
-static int apply_r_mips_26(struct module *me, uint32_t *location,
-	Elf32_Addr v)
-{
-	if (v % 4) {
-		printk(KERN_ERR "module %s: dangerous relocation\n", me->name);
-		return -ENOEXEC;
-	}
-
-	if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
-		printk(KERN_ERR
-		       "module %s: relocation overflow\n",
-		       me->name);
-		return -ENOEXEC;
-	}
-
-	*location = (*location & ~0x03ffffff) |
-	            ((*location + (v >> 2)) & 0x03ffffff);
-
-	return 0;
-}
-
-static int apply_r_mips_hi16(struct module *me, uint32_t *location,
-	Elf32_Addr v)
-{
-	struct mips_hi16 *n;
-
-	/*
-	 * We cannot relocate this one now because we don't know the value of
-	 * the carry we need to add.  Save the information, and let LO16 do the
-	 * actual relocation.
-	 */
-	n = kmalloc(sizeof *n, GFP_KERNEL);
-	if (!n)
-		return -ENOMEM;
-
-	n->addr = location;
-	n->value = v;
-	n->next = mips_hi16_list;
-	mips_hi16_list = n;
-
-	return 0;
-}
-
-static int apply_r_mips_lo16(struct module *me, uint32_t *location,
-	Elf32_Addr v)
-{
-	unsigned long insnlo = *location;
-	Elf32_Addr val, vallo;
-
-	/* Sign extend the addend we extract from the lo insn.  */
-	vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
-
-	if (mips_hi16_list != NULL) {
-		struct mips_hi16 *l;
-
-		l = mips_hi16_list;
-		while (l != NULL) {
-			struct mips_hi16 *next;
-			unsigned long insn;
-
-			/*
-			 * The value for the HI16 had best be the same.
-			 */
-			if (v != l->value)
-				goto out_danger;
-
-			/*
-			 * Do the HI16 relocation.  Note that we actually don't
-			 * need to know anything about the LO16 itself, except
-			 * where to find the low 16 bits of the addend needed
-			 * by the LO16.
-			 */
-			insn = *l->addr;
-			val = ((insn & 0xffff) << 16) + vallo;
-			val += v;
-
-			/*
-			 * Account for the sign extension that will happen in
-			 * the low bits.
-			 */
-			val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff;
-
-			insn = (insn & ~0xffff) | val;
-			*l->addr = insn;
-
-			next = l->next;
-			kfree(l);
-			l = next;
-		}
-
-		mips_hi16_list = NULL;
-	}
-
-	/*
-	 * Ok, we're done with the HI16 relocs.  Now deal with the LO16.
-	 */
-	val = v + vallo;
-	insnlo = (insnlo & ~0xffff) | (val & 0xffff);
-	*location = insnlo;
-
-	return 0;
-
-out_danger:
-	printk(KERN_ERR "module %s: dangerous " "relocation\n", me->name);
-
-	return -ENOEXEC;
-}
-
-static int (*reloc_handlers[]) (struct module *me, uint32_t *location,
-	Elf32_Addr v) = {
-	[R_MIPS_NONE]	= apply_r_mips_none,
-	[R_MIPS_32]	= apply_r_mips_32,
-	[R_MIPS_26]	= apply_r_mips_26,
-	[R_MIPS_HI16]	= apply_r_mips_hi16,
-	[R_MIPS_LO16]	= apply_r_mips_lo16
-};
-
-int apply_relocate(Elf32_Shdr *sechdrs,
-		   const char *strtab,
-		   unsigned int symindex,
-		   unsigned int relsec,
-		   struct module *me)
-{
-	Elf32_Rel *rel = (void *) sechdrs[relsec].sh_addr;
-	Elf32_Sym *sym;
-	uint32_t *location;
-	unsigned int i;
-	Elf32_Addr v;
-	int res;
-
-	pr_debug("Applying relocate section %u to %u\n", relsec,
-	       sechdrs[relsec].sh_info);
-
-	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
-		Elf32_Word r_info = rel[i].r_info;
-
-		/* This is where to make the change */
-		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
-			+ rel[i].r_offset;
-		/* This is the symbol it is referring to */
-		sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
-			+ ELF32_R_SYM(r_info);
-		if (!sym->st_value) {
-			printk(KERN_WARNING "%s: Unknown symbol %s\n",
-			       me->name, strtab + sym->st_name);
-			return -ENOENT;
-		}
-
-		v = sym->st_value;
-
-		res = reloc_handlers[ELF32_R_TYPE(r_info)](me, location, v);
-		if (res)
-			return res;
-	}
-
-	return 0;
-}
-
-int apply_relocate_add(Elf32_Shdr *sechdrs,
-		       const char *strtab,
-		       unsigned int symindex,
-		       unsigned int relsec,
-		       struct module *me)
-{
-	/*
-	 * Current binutils always generate .rela relocations.  Keep smiling
-	 * if it's empty, abort otherwise.
-	 */
-	if (!sechdrs[relsec].sh_size)
-		return 0;
-
-	printk(KERN_ERR "module %s: ADD RELOCATION unsupported\n",
-	       me->name);
-	return -ENOEXEC;
-}
diff --git a/arch/mips/kernel/module-elf64.c b/arch/mips/kernel/module-elf64.c
deleted file mode 100644
index e804792ee1ee..000000000000
--- a/arch/mips/kernel/module-elf64.c
+++ /dev/null
@@ -1,274 +0,0 @@
-/*
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- *  Copyright (C) 2001 Rusty Russell.
- *  Copyright (C) 2003, 2004 Ralf Baechle (ralf@linux-mips.org)
- */
-
-#undef DEBUG
-
-#include <linux/moduleloader.h>
-#include <linux/elf.h>
-#include <linux/vmalloc.h>
-#include <linux/slab.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-
-struct mips_hi16 {
-	struct mips_hi16 *next;
-	Elf32_Addr *addr;
-	Elf64_Addr value;
-};
-
-static struct mips_hi16 *mips_hi16_list;
-
-void *module_alloc(unsigned long size)
-{
-	if (size == 0)
-		return NULL;
-	return vmalloc(size);
-}
-
-
-/* Free memory returned from module_alloc */
-void module_free(struct module *mod, void *module_region)
-{
-	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
-}
-
-int module_frob_arch_sections(Elf_Ehdr *hdr,
-			      Elf_Shdr *sechdrs,
-			      char *secstrings,
-			      struct module *mod)
-{
-	return 0;
-}
-
-int apply_relocate(Elf64_Shdr *sechdrs,
-		   const char *strtab,
-		   unsigned int symindex,
-		   unsigned int relsec,
-		   struct module *me)
-{
-	/*
-	 * We don't want to deal with REL relocations - RELA is so much saner.
-	 */
-	if (!sechdrs[relsec].sh_size)
-		return 0;
-
-	printk(KERN_ERR "module %s: REL relocation unsupported\n",
-	       me->name);
-	return -ENOEXEC;
-}
-
-static int apply_r_mips_none(struct module *me, uint32_t *location,
-	Elf64_Addr v)
-{
-	return 0;
-}
-
-static int apply_r_mips_32(struct module *me, uint32_t *location,
-	Elf64_Addr v)
-{
-	*location = v;
-
-	return 0;
-}
-
-static int apply_r_mips_26(struct module *me, uint32_t *location,
-	Elf64_Addr v)
-{
-	if (v % 4) {
-		printk(KERN_ERR "module %s: dangerous relocation\n", me->name);
-		return -ENOEXEC;
-	}
-
-	if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
-		printk(KERN_ERR
-		       "module %s: relocation overflow\n",
-		       me->name);
-		return -ENOEXEC;
-	}
-
-	*location = (*location & ~0x03ffffff) | ((v >> 2) & 0x03ffffff);
-
-	return 0;
-}
-
-static int apply_r_mips_hi16(struct module *me, uint32_t *location,
-	Elf64_Addr v)
-{
-	struct mips_hi16 *n;
-
-	/*
-	 * We cannot relocate this one now because we don't know the value of
-	 * the carry we need to add.  Save the information, and let LO16 do the
-	 * actual relocation.
-	 */
-	n = kmalloc(sizeof *n, GFP_KERNEL);
-	if (!n)
-		return -ENOMEM;
-
-	n->addr = location;
-	n->value = v;
-	n->next = mips_hi16_list;
-	mips_hi16_list = n;
-
-	return 0;
-}
-
-static int apply_r_mips_lo16(struct module *me, uint32_t *location,
-	Elf64_Addr v)
-{
-	unsigned long insnlo = *location;
-	Elf32_Addr val, vallo;
-
-	/* Sign extend the addend we extract from the lo insn.  */
-	vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
-
-	if (mips_hi16_list != NULL) {
-		struct mips_hi16 *l;
-
-		l = mips_hi16_list;
-		while (l != NULL) {
-			struct mips_hi16 *next;
-			unsigned long insn;
-
-			/*
-			 * The value for the HI16 had best be the same.
-			 */
-			if (v != l->value)
-				goto out_danger;
-
-			/*
-			 * Do the HI16 relocation.  Note that we actually don't
-			 * need to know anything about the LO16 itself, except
-			 * where to find the low 16 bits of the addend needed
-			 * by the LO16.
-			 */
-			insn = *l->addr;
-			val = ((insn & 0xffff) << 16) + vallo;
-			val += v;
-
-			/*
-			 * Account for the sign extension that will happen in
-			 * the low bits.
-			 */
-			val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff;
-
-			insn = (insn & ~0xffff) | val;
-			*l->addr = insn;
-
-			next = l->next;
-			kfree(l);
-			l = next;
-		}
-
-		mips_hi16_list = NULL;
-	}
-
-	/*
-	 * Ok, we're done with the HI16 relocs.  Now deal with the LO16.
-	 */
-	insnlo = (insnlo & ~0xffff) | (v & 0xffff);
-	*location = insnlo;
-
-	return 0;
-
-out_danger:
-	printk(KERN_ERR "module %s: dangerous " "relocation\n", me->name);
-
-	return -ENOEXEC;
-}
-
-static int apply_r_mips_64(struct module *me, uint32_t *location,
-	Elf64_Addr v)
-{
-	*(uint64_t *) location = v;
-
-	return 0;
-}
-
-
-static int apply_r_mips_higher(struct module *me, uint32_t *location,
-	Elf64_Addr v)
-{
-	*location = (*location & 0xffff0000) |
-	            ((((long long) v + 0x80008000LL) >> 32) & 0xffff);
-
-	return 0;
-}
-
-static int apply_r_mips_highest(struct module *me, uint32_t *location,
-	Elf64_Addr v)
-{
-	*location = (*location & 0xffff0000) |
-	            ((((long long) v + 0x800080008000LL) >> 48) & 0xffff);
-
-	return 0;
-}
-
-static int (*reloc_handlers[]) (struct module *me, uint32_t *location,
-	Elf64_Addr v) = {
-	[R_MIPS_NONE]		= apply_r_mips_none,
-	[R_MIPS_32]		= apply_r_mips_32,
-	[R_MIPS_26]		= apply_r_mips_26,
-	[R_MIPS_HI16]		= apply_r_mips_hi16,
-	[R_MIPS_LO16]		= apply_r_mips_lo16,
-	[R_MIPS_64]		= apply_r_mips_64,
-	[R_MIPS_HIGHER]		= apply_r_mips_higher,
-	[R_MIPS_HIGHEST]	= apply_r_mips_highest
-};
-
-int apply_relocate_add(Elf64_Shdr *sechdrs,
-		       const char *strtab,
-		       unsigned int symindex,
-		       unsigned int relsec,
-		       struct module *me)
-{
-	Elf64_Mips_Rela *rel = (void *) sechdrs[relsec].sh_addr;
-	Elf64_Sym *sym;
-	uint32_t *location;
-	unsigned int i;
-	Elf64_Addr v;
-	int res;
-
-	pr_debug("Applying relocate section %u to %u\n", relsec,
-	       sechdrs[relsec].sh_info);
-
-	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
-		/* This is where to make the change */
-		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
-			+ rel[i].r_offset;
-		/* This is the symbol it is referring to */
-		sym = (Elf64_Sym *)sechdrs[symindex].sh_addr + rel[i].r_sym;
-		if (!sym->st_value) {
-			printk(KERN_WARNING "%s: Unknown symbol %s\n",
-			       me->name, strtab + sym->st_name);
-			return -ENOENT;
-		}
-
-		v = sym->st_value;
-
-		res = reloc_handlers[rel[i].r_type](me, location, v);
-		if (res)
-			return res;
-	}
-
-	return 0;
-}
diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c
index 458af3c7a639..e54a7f442f8a 100644
--- a/arch/mips/kernel/module.c
+++ b/arch/mips/kernel/module.c
@@ -1,9 +1,345 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ *  Copyright (C) 2001 Rusty Russell.
+ *  Copyright (C) 2003, 2004 Ralf Baechle (ralf@linux-mips.org)
+ *  Copyright (C) 2005 Thiemo Seufer
+ */
+
+#undef DEBUG
+
+#include <linux/moduleloader.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/spinlock.h>
 
+struct mips_hi16 {
+	struct mips_hi16 *next;
+	Elf_Addr *addr;
+	Elf_Addr value;
+};
+
+static struct mips_hi16 *mips_hi16_list;
+
 static LIST_HEAD(dbe_list);
 static DEFINE_SPINLOCK(dbe_lock);
 
+void *module_alloc(unsigned long size)
+{
+	if (size == 0)
+		return NULL;
+	return vmalloc(size);
+}
+
+/* Free memory returned from module_alloc */
+void module_free(struct module *mod, void *module_region)
+{
+	vfree(module_region);
+	/* FIXME: If module_region == mod->init_region, trim exception
+           table entries. */
+}
+
+int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
+			      char *secstrings, struct module *mod)
+{
+	return 0;
+}
+
+static int apply_r_mips_none(struct module *me, u32 *location, Elf_Addr v)
+{
+	return 0;
+}
+
+static int apply_r_mips_32_rel(struct module *me, u32 *location, Elf_Addr v)
+{
+	*location += v;
+
+	return 0;
+}
+
+static int apply_r_mips_32_rela(struct module *me, u32 *location, Elf_Addr v)
+{
+	*location = v;
+
+	return 0;
+}
+
+static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v)
+{
+	if (v % 4) {
+		printk(KERN_ERR "module %s: dangerous relocation\n", me->name);
+		return -ENOEXEC;
+	}
+
+	if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
+		printk(KERN_ERR
+		       "module %s: relocation overflow\n",
+		       me->name);
+		return -ENOEXEC;
+	}
+
+	*location = (*location & ~0x03ffffff) |
+	            ((*location + (v >> 2)) & 0x03ffffff);
+
+	return 0;
+}
+
+static int apply_r_mips_26_rela(struct module *me, u32 *location, Elf_Addr v)
+{
+	if (v % 4) {
+		printk(KERN_ERR "module %s: dangerous relocation\n", me->name);
+		return -ENOEXEC;
+	}
+
+	if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
+		printk(KERN_ERR
+		       "module %s: relocation overflow\n",
+		       me->name);
+		return -ENOEXEC;
+	}
+
+	*location = (*location & ~0x03ffffff) | ((v >> 2) & 0x03ffffff);
+
+	return 0;
+}
+
+static int apply_r_mips_hi16_rel(struct module *me, u32 *location, Elf_Addr v)
+{
+	struct mips_hi16 *n;
+
+	/*
+	 * We cannot relocate this one now because we don't know the value of
+	 * the carry we need to add.  Save the information, and let LO16 do the
+	 * actual relocation.
+	 */
+	n = kmalloc(sizeof *n, GFP_KERNEL);
+	if (!n)
+		return -ENOMEM;
+
+	n->addr = (Elf_Addr *)location;
+	n->value = v;
+	n->next = mips_hi16_list;
+	mips_hi16_list = n;
+
+	return 0;
+}
+
+static int apply_r_mips_hi16_rela(struct module *me, u32 *location, Elf_Addr v)
+{
+	*location = (*location & 0xffff0000) |
+	            ((((long long) v + 0x8000LL) >> 16) & 0xffff);
+
+	return 0;
+}
+
+static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v)
+{
+	unsigned long insnlo = *location;
+	Elf_Addr val, vallo;
+
+	/* Sign extend the addend we extract from the lo insn.  */
+	vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
+
+	if (mips_hi16_list != NULL) {
+		struct mips_hi16 *l;
+
+		l = mips_hi16_list;
+		while (l != NULL) {
+			struct mips_hi16 *next;
+			unsigned long insn;
+
+			/*
+			 * The value for the HI16 had best be the same.
+			 */
+			if (v != l->value)
+				goto out_danger;
+
+			/*
+			 * Do the HI16 relocation.  Note that we actually don't
+			 * need to know anything about the LO16 itself, except
+			 * where to find the low 16 bits of the addend needed
+			 * by the LO16.
+			 */
+			insn = *l->addr;
+			val = ((insn & 0xffff) << 16) + vallo;
+			val += v;
+
+			/*
+			 * Account for the sign extension that will happen in
+			 * the low bits.
+			 */
+			val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff;
+
+			insn = (insn & ~0xffff) | val;
+			*l->addr = insn;
+
+			next = l->next;
+			kfree(l);
+			l = next;
+		}
+
+		mips_hi16_list = NULL;
+	}
+
+	/*
+	 * Ok, we're done with the HI16 relocs.  Now deal with the LO16.
+	 */
+	val = v + vallo;
+	insnlo = (insnlo & ~0xffff) | (val & 0xffff);
+	*location = insnlo;
+
+	return 0;
+
+out_danger:
+	printk(KERN_ERR "module %s: dangerous " "relocation\n", me->name);
+
+	return -ENOEXEC;
+}
+
+static int apply_r_mips_lo16_rela(struct module *me, u32 *location, Elf_Addr v)
+{
+	*location = (*location & 0xffff0000) | (v & 0xffff);
+
+	return 0;
+}
+
+static int apply_r_mips_64_rela(struct module *me, u32 *location, Elf_Addr v)
+{
+	*(Elf_Addr *)location = v;
+
+	return 0;
+}
+
+static int apply_r_mips_higher_rela(struct module *me, u32 *location,
+				    Elf_Addr v)
+{
+	*location = (*location & 0xffff0000) |
+	            ((((long long) v + 0x80008000LL) >> 32) & 0xffff);
+
+	return 0;
+}
+
+static int apply_r_mips_highest_rela(struct module *me, u32 *location,
+				     Elf_Addr v)
+{
+	*location = (*location & 0xffff0000) |
+	            ((((long long) v + 0x800080008000LL) >> 48) & 0xffff);
+
+	return 0;
+}
+
+static int (*reloc_handlers_rel[]) (struct module *me, u32 *location,
+				Elf_Addr v) = {
+	[R_MIPS_NONE]		= apply_r_mips_none,
+	[R_MIPS_32]		= apply_r_mips_32_rel,
+	[R_MIPS_26]		= apply_r_mips_26_rel,
+	[R_MIPS_HI16]		= apply_r_mips_hi16_rel,
+	[R_MIPS_LO16]		= apply_r_mips_lo16_rel
+};
+
+static int (*reloc_handlers_rela[]) (struct module *me, u32 *location,
+				Elf_Addr v) = {
+	[R_MIPS_NONE]		= apply_r_mips_none,
+	[R_MIPS_32]		= apply_r_mips_32_rela,
+	[R_MIPS_26]		= apply_r_mips_26_rela,
+	[R_MIPS_HI16]		= apply_r_mips_hi16_rela,
+	[R_MIPS_LO16]		= apply_r_mips_lo16_rela,
+	[R_MIPS_64]		= apply_r_mips_64_rela,
+	[R_MIPS_HIGHER]		= apply_r_mips_higher_rela,
+	[R_MIPS_HIGHEST]	= apply_r_mips_highest_rela
+};
+
+int apply_relocate(Elf_Shdr *sechdrs, const char *strtab,
+		   unsigned int symindex, unsigned int relsec,
+		   struct module *me)
+{
+	Elf_Mips_Rel *rel = (void *) sechdrs[relsec].sh_addr;
+	Elf_Sym *sym;
+	u32 *location;
+	unsigned int i;
+	Elf_Addr v;
+	int res;
+
+	pr_debug("Applying relocate section %u to %u\n", relsec,
+	       sechdrs[relsec].sh_info);
+
+	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+		/* This is where to make the change */
+		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+			+ rel[i].r_offset;
+		/* This is the symbol it is referring to */
+		sym = (Elf_Sym *)sechdrs[symindex].sh_addr
+			+ ELF_MIPS_R_SYM(rel[i]);
+		if (!sym->st_value) {
+			printk(KERN_WARNING "%s: Unknown symbol %s\n",
+			       me->name, strtab + sym->st_name);
+			return -ENOENT;
+		}
+
+		v = sym->st_value;
+
+		res = reloc_handlers_rel[ELF_MIPS_R_TYPE(rel[i])](me, location, v);
+		if (res)
+			return res;
+	}
+
+	return 0;
+}
+
+int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
+		       unsigned int symindex, unsigned int relsec,
+		       struct module *me)
+{
+	Elf_Mips_Rela *rel = (void *) sechdrs[relsec].sh_addr;
+	Elf_Sym *sym;
+	u32 *location;
+	unsigned int i;
+	Elf_Addr v;
+	int res;
+
+	pr_debug("Applying relocate section %u to %u\n", relsec,
+	       sechdrs[relsec].sh_info);
+
+	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+		/* This is where to make the change */
+		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+			+ rel[i].r_offset;
+		/* This is the symbol it is referring to */
+		sym = (Elf_Sym *)sechdrs[symindex].sh_addr
+			+ ELF_MIPS_R_SYM(rel[i]);
+		if (!sym->st_value) {
+			printk(KERN_WARNING "%s: Unknown symbol %s\n",
+			       me->name, strtab + sym->st_name);
+			return -ENOENT;
+		}
+
+		v = sym->st_value + rel[i].r_addend;
+
+		res = reloc_handlers_rela[ELF_MIPS_R_TYPE(rel[i])](me, location, v);
+		if (res)
+			return res;
+	}
+
+	return 0;
+}
+
 /* Given an address, look for it in the module exception tables. */
 const struct exception_table_entry *search_module_dbetables(unsigned long addr)
 {
diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
index 0f159f30e894..86fe15b273cd 100644
--- a/arch/mips/kernel/proc.c
+++ b/arch/mips/kernel/proc.c
@@ -2,7 +2,8 @@
  *  linux/arch/mips/kernel/proc.c
  *
  *  Copyright (C) 1995, 1996, 2001  Ralf Baechle
- *  Copyright (C) 2001  MIPS Technologies, Inc.
+ *  Copyright (C) 2001, 2004  MIPS Technologies, Inc.
+ *  Copyright (C) 2004  Maciej W. Rozycki
  */
 #include <linux/config.h>
 #include <linux/delay.h>
@@ -19,63 +20,69 @@
 unsigned int vced_count, vcei_count;
 
 static const char *cpu_name[] = {
-	[CPU_UNKNOWN]	"unknown",
-	[CPU_R2000]	"R2000",
-	[CPU_R3000]	"R3000",
-	[CPU_R3000A]	"R3000A",
-	[CPU_R3041]	"R3041",
-	[CPU_R3051]	"R3051",
-	[CPU_R3052]	"R3052",
-	[CPU_R3081]	"R3081",
-	[CPU_R3081E]	"R3081E",
-	[CPU_R4000PC]	"R4000PC",
-	[CPU_R4000SC]	"R4000SC",
-	[CPU_R4000MC]	"R4000MC",
-        [CPU_R4200]	"R4200",
-	[CPU_R4400PC]	"R4400PC",
-	[CPU_R4400SC]	"R4400SC",
-	[CPU_R4400MC]	"R4400MC",
-	[CPU_R4600]	"R4600",
-	[CPU_R6000]	"R6000",
-        [CPU_R6000A]	"R6000A",
-	[CPU_R8000]	"R8000",
-	[CPU_R10000]	"R10000",
-	[CPU_R12000]	"R12000",
-	[CPU_R4300]	"R4300",
-	[CPU_R4650]	"R4650",
-	[CPU_R4700]	"R4700",
-	[CPU_R5000]	"R5000",
-        [CPU_R5000A]	"R5000A",
-	[CPU_R4640]	"R4640",
-	[CPU_NEVADA]	"Nevada",
-	[CPU_RM7000]	"RM7000",
-	[CPU_RM9000]	"RM9000",
-	[CPU_R5432]	"R5432",
-	[CPU_4KC]	"MIPS 4Kc",
-        [CPU_5KC]	"MIPS 5Kc",
-	[CPU_R4310]	"R4310",
-	[CPU_SB1]	"SiByte SB1",
-	[CPU_TX3912]	"TX3912",
-	[CPU_TX3922]	"TX3922",
-	[CPU_TX3927]	"TX3927",
-	[CPU_AU1000]	"Au1000",
-	[CPU_AU1500]	"Au1500",
-	[CPU_4KEC]	"MIPS 4KEc",
-	[CPU_4KSC]	"MIPS 4KSc",
-	[CPU_VR41XX]	"NEC Vr41xx",
-	[CPU_R5500]	"R5500",
-	[CPU_TX49XX]	"TX49xx",
-	[CPU_20KC]	"MIPS 20Kc",
-	[CPU_24K]	"MIPS 24K",
-	[CPU_25KF]	"MIPS 25Kf",
-	[CPU_VR4111]	"NEC VR4111",
-	[CPU_VR4121]	"NEC VR4121",
-	[CPU_VR4122]	"NEC VR4122",
-	[CPU_VR4131]	"NEC VR4131",
-	[CPU_VR4133]	"NEC VR4133",
-	[CPU_VR4181]	"NEC VR4181",
-	[CPU_VR4181A]	"NEC VR4181A",
-	[CPU_SR71000]	"Sandcraft SR71000"
+	[CPU_UNKNOWN]	= "unknown",
+	[CPU_R2000]	= "R2000",
+	[CPU_R3000]	= "R3000",
+	[CPU_R3000A]	= "R3000A",
+	[CPU_R3041]	= "R3041",
+	[CPU_R3051]	= "R3051",
+	[CPU_R3052]	= "R3052",
+	[CPU_R3081]	= "R3081",
+	[CPU_R3081E]	= "R3081E",
+	[CPU_R4000PC]	= "R4000PC",
+	[CPU_R4000SC]	= "R4000SC",
+	[CPU_R4000MC]	= "R4000MC",
+        [CPU_R4200]	= "R4200",
+	[CPU_R4400PC]	= "R4400PC",
+	[CPU_R4400SC]	= "R4400SC",
+	[CPU_R4400MC]	= "R4400MC",
+	[CPU_R4600]	= "R4600",
+	[CPU_R6000]	= "R6000",
+        [CPU_R6000A]	= "R6000A",
+	[CPU_R8000]	= "R8000",
+	[CPU_R10000]	= "R10000",
+	[CPU_R12000]	= "R12000",
+	[CPU_R4300]	= "R4300",
+	[CPU_R4650]	= "R4650",
+	[CPU_R4700]	= "R4700",
+	[CPU_R5000]	= "R5000",
+        [CPU_R5000A]	= "R5000A",
+	[CPU_R4640]	= "R4640",
+	[CPU_NEVADA]	= "Nevada",
+	[CPU_RM7000]	= "RM7000",
+	[CPU_RM9000]	= "RM9000",
+	[CPU_R5432]	= "R5432",
+	[CPU_4KC]	= "MIPS 4Kc",
+        [CPU_5KC]	= "MIPS 5Kc",
+	[CPU_R4310]	= "R4310",
+	[CPU_SB1]	= "SiByte SB1",
+	[CPU_SB1A]	= "SiByte SB1A",
+	[CPU_TX3912]	= "TX3912",
+	[CPU_TX3922]	= "TX3922",
+	[CPU_TX3927]	= "TX3927",
+	[CPU_AU1000]	= "Au1000",
+	[CPU_AU1500]	= "Au1500",
+	[CPU_AU1100]	= "Au1100",
+	[CPU_AU1550]	= "Au1550",
+	[CPU_AU1200]	= "Au1200",
+	[CPU_4KEC]	= "MIPS 4KEc",
+	[CPU_4KSC]	= "MIPS 4KSc",
+	[CPU_VR41XX]	= "NEC Vr41xx",
+	[CPU_R5500]	= "R5500",
+	[CPU_TX49XX]	= "TX49xx",
+	[CPU_20KC]	= "MIPS 20Kc",
+	[CPU_24K]	= "MIPS 24K",
+	[CPU_25KF]	= "MIPS 25Kf",
+	[CPU_34K]	= "MIPS 34K",
+	[CPU_VR4111]	= "NEC VR4111",
+	[CPU_VR4121]	= "NEC VR4121",
+	[CPU_VR4122]	= "NEC VR4122",
+	[CPU_VR4131]	= "NEC VR4131",
+	[CPU_VR4133]	= "NEC VR4133",
+	[CPU_VR4181]	= "NEC VR4181",
+	[CPU_VR4181A]	= "NEC VR4181A",
+	[CPU_SR71000]	= "Sandcraft SR71000",
+	[CPU_PR4450]	= "Philips PR4450",
 };
 
 
@@ -105,8 +112,8 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	                           (version >> 4) & 0x0f, version & 0x0f,
 	                           (fp_vers >> 4) & 0x0f, fp_vers & 0x0f);
 	seq_printf(m, "BogoMIPS\t\t: %lu.%02lu\n",
-	              loops_per_jiffy / (500000/HZ),
-	              (loops_per_jiffy / (5000/HZ)) % 100);
+	              cpu_data[n].udelay_val / (500000/HZ),
+	              (cpu_data[n].udelay_val / (5000/HZ)) % 100);
 	seq_printf(m, "wait instruction\t: %s\n", cpu_wait ? "yes" : "no");
 	seq_printf(m, "microsecond timers\t: %s\n",
 	              cpu_has_counter ? "yes" : "no");
@@ -115,6 +122,14 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	              cpu_has_divec ? "yes" : "no");
 	seq_printf(m, "hardware watchpoint\t: %s\n",
 	              cpu_has_watch ? "yes" : "no");
+	seq_printf(m, "ASEs implemented\t:%s%s%s%s%s%s\n",
+		      cpu_has_mips16 ? " mips16" : "",
+		      cpu_has_mdmx ? " mdmx" : "",
+		      cpu_has_mips3d ? " mips3d" : "",
+		      cpu_has_smartmips ? " smartmips" : "",
+		      cpu_has_dsp ? " dsp" : "",
+		      cpu_has_mipsmt ? " mt" : ""
+		);
 
 	sprintf(fmt, "VCE%%c exceptions\t\t: %s\n",
 	        cpu_has_vce ? "%u" : "not available");
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index e4f2f8011387..dd725779d91f 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -25,8 +25,10 @@
 #include <linux/init.h>
 #include <linux/completion.h>
 
+#include <asm/abi.h>
 #include <asm/bootinfo.h>
 #include <asm/cpu.h>
+#include <asm/dsp.h>
 #include <asm/fpu.h>
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -39,14 +41,6 @@
 #include <asm/inst.h>
 
 /*
- * We use this if we don't have any better idle routine..
- * (This to kill: kernel/platform.c.
- */
-void default_idle (void)
-{
-}
-
-/*
  * The idle thread. There's no useful work to be done, so just try to conserve
  * power and have a low exit latency (ie sit in a loop waiting for somebody to
  * say that they'd like to reschedule)
@@ -58,10 +52,60 @@ ATTRIB_NORET void cpu_idle(void)
 		while (!need_resched())
 			if (cpu_wait)
 				(*cpu_wait)();
+		preempt_enable_no_resched();
 		schedule();
+		preempt_disable();
 	}
 }
 
+extern int do_signal(sigset_t *oldset, struct pt_regs *regs);
+extern int do_signal32(sigset_t *oldset, struct pt_regs *regs);
+
+/*
+ * Native o32 and N64 ABI without DSP ASE
+ */
+extern int setup_frame(struct k_sigaction * ka, struct pt_regs *regs,
+        int signr, sigset_t *set);
+extern int setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
+        int signr, sigset_t *set, siginfo_t *info);
+
+struct mips_abi mips_abi = {
+	.do_signal	= do_signal,
+#ifdef CONFIG_TRAD_SIGNALS
+	.setup_frame	= setup_frame,
+#endif
+	.setup_rt_frame	= setup_rt_frame
+};
+
+#ifdef CONFIG_MIPS32_O32
+/*
+ * o32 compatibility on 64-bit kernels, without DSP ASE
+ */
+extern int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs,
+        int signr, sigset_t *set);
+extern int setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs,
+        int signr, sigset_t *set, siginfo_t *info);
+
+struct mips_abi mips_abi_32 = {
+	.do_signal	= do_signal32,
+	.setup_frame	= setup_frame_32,
+	.setup_rt_frame	= setup_rt_frame_32
+};
+#endif /* CONFIG_MIPS32_O32 */
+
+#ifdef CONFIG_MIPS32_N32
+/*
+ * N32 on 64-bit kernels, without DSP ASE
+ */
+extern int setup_rt_frame_n32(struct k_sigaction * ka, struct pt_regs *regs,
+        int signr, sigset_t *set, siginfo_t *info);
+
+struct mips_abi mips_abi_n32 = {
+	.do_signal	= do_signal,
+	.setup_rt_frame	= setup_rt_frame_n32
+};
+#endif /* CONFIG_MIPS32_N32 */
+
 asmlinkage void ret_from_fork(void);
 
 void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long sp)
@@ -78,6 +122,8 @@ void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long sp)
 	regs->cp0_status = status;
 	clear_used_math();
 	lose_fpu();
+	if (cpu_has_dsp)
+		__init_dsp();
 	regs->cp0_epc = pc;
 	regs->regs[29] = sp;
 	current_thread_info()->addr_limit = USER_DS;
@@ -97,14 +143,17 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
 	struct thread_info *ti = p->thread_info;
 	struct pt_regs *childregs;
 	long childksp;
+	p->set_child_tid = p->clear_child_tid = NULL;
 
 	childksp = (unsigned long)ti + THREAD_SIZE - 32;
 
 	preempt_disable();
 
-	if (is_fpu_owner()) {
+	if (is_fpu_owner())
 		save_fp(p);
-	}
+
+	if (cpu_has_dsp)
+		save_dsp(p);
 
 	preempt_enable();
 
@@ -142,6 +191,9 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
 	childregs->cp0_status &= ~(ST0_CU2|ST0_CU1);
 	clear_tsk_thread_flag(p, TIF_USEDFPU);
 
+	if (clone_flags & CLONE_SETTLS)
+		ti->tp_value = regs->regs[7];
+
 	return 0;
 }
 
@@ -175,6 +227,14 @@ void dump_regs(elf_greg_t *gp, struct pt_regs *regs)
 #endif
 }
 
+int dump_task_regs (struct task_struct *tsk, elf_gregset_t *regs)
+{
+	struct thread_info *ti = tsk->thread_info;
+	long ksp = (unsigned long)ti + THREAD_SIZE - 32;
+	dump_regs(&(*regs)[0], (struct pt_regs *) ksp - 1);
+	return 1;
+}
+
 int dump_task_fpu (struct task_struct *t, elf_fpregset_t *fpr)
 {
 	memcpy(fpr, &t->thread.fpu, sizeof(current->thread.fpu));
@@ -211,22 +271,48 @@ long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
 	return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, &regs, 0, NULL, NULL);
 }
 
-struct mips_frame_info {
+static struct mips_frame_info {
+	void *func;
+	int omit_fp;	/* compiled without fno-omit-frame-pointer */
 	int frame_offset;
 	int pc_offset;
+} schedule_frame, mfinfo[] = {
+	{ schedule, 0 },	/* must be first */
+	/* arch/mips/kernel/semaphore.c */
+	{ __down, 1 },
+	{ __down_interruptible, 1 },
+	/* kernel/sched.c */
+#ifdef CONFIG_PREEMPT
+	{ preempt_schedule, 0 },
+#endif
+	{ wait_for_completion, 0 },
+	{ interruptible_sleep_on, 0 },
+	{ interruptible_sleep_on_timeout, 0 },
+	{ sleep_on, 0 },
+	{ sleep_on_timeout, 0 },
+	{ yield, 0 },
+	{ io_schedule, 0 },
+	{ io_schedule_timeout, 0 },
+#if defined(CONFIG_SMP) && defined(CONFIG_PREEMPT)
+	{ __preempt_spin_lock, 0 },
+	{ __preempt_write_lock, 0 },
+#endif
+	/* kernel/timer.c */
+	{ schedule_timeout, 1 },
+/*	{ nanosleep_restart, 1 }, */
+	/* lib/rwsem-spinlock.c */
+	{ __down_read, 1 },
+	{ __down_write, 1 },
 };
-static struct mips_frame_info schedule_frame;
-static struct mips_frame_info schedule_timeout_frame;
-static struct mips_frame_info sleep_on_frame;
-static struct mips_frame_info sleep_on_timeout_frame;
-static struct mips_frame_info wait_for_completion_frame;
+
 static int mips_frame_info_initialized;
-static int __init get_frame_info(struct mips_frame_info *info, void *func)
+static int __init get_frame_info(struct mips_frame_info *info)
 {
 	int i;
+	void *func = info->func;
 	union mips_instruction *ip = (union mips_instruction *)func;
 	info->pc_offset = -1;
-	info->frame_offset = -1;
+	info->frame_offset = info->omit_fp ? 0 : -1;
 	for (i = 0; i < 128; i++, ip++) {
 		/* if jal, jalr, jr, stop. */
 		if (ip->j_format.opcode == jal_op ||
@@ -247,14 +333,16 @@ static int __init get_frame_info(struct mips_frame_info *info, void *func)
 			/* sw / sd $ra, offset($sp) */
 			if (ip->i_format.rt == 31) {
 				if (info->pc_offset != -1)
-					break;
+					continue;
 				info->pc_offset =
 					ip->i_format.simmediate / sizeof(long);
 			}
 			/* sw / sd $s8, offset($sp) */
 			if (ip->i_format.rt == 30) {
+//#if 0	/* gcc 3.4 does aggressive optimization... */
 				if (info->frame_offset != -1)
-					break;
+					continue;
+//#endif
 				info->frame_offset =
 					ip->i_format.simmediate / sizeof(long);
 			}
@@ -272,13 +360,25 @@ static int __init get_frame_info(struct mips_frame_info *info, void *func)
 
 static int __init frame_info_init(void)
 {
-	mips_frame_info_initialized =
-		!get_frame_info(&schedule_frame, schedule) &&
-		!get_frame_info(&schedule_timeout_frame, schedule_timeout) &&
-		!get_frame_info(&sleep_on_frame, sleep_on) &&
-		!get_frame_info(&sleep_on_timeout_frame, sleep_on_timeout) &&
-		!get_frame_info(&wait_for_completion_frame, wait_for_completion);
-
+	int i, found;
+	for (i = 0; i < ARRAY_SIZE(mfinfo); i++)
+		if (get_frame_info(&mfinfo[i]))
+			return -1;
+	schedule_frame = mfinfo[0];
+	/* bubble sort */
+	do {
+		struct mips_frame_info tmp;
+		found = 0;
+		for (i = 1; i < ARRAY_SIZE(mfinfo); i++) {
+			if (mfinfo[i-1].func > mfinfo[i].func) {
+				tmp = mfinfo[i];
+				mfinfo[i] = mfinfo[i-1];
+				mfinfo[i-1] = tmp;
+				found = 1;
+			}
+		}
+	} while (found);
+	mips_frame_info_initialized = 1;
 	return 0;
 }
 
@@ -303,60 +403,39 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
 /* get_wchan - a maintenance nightmare^W^Wpain in the ass ...  */
 unsigned long get_wchan(struct task_struct *p)
 {
+	unsigned long stack_page;
 	unsigned long frame, pc;
 
 	if (!p || p == current || p->state == TASK_RUNNING)
 		return 0;
 
-	if (!mips_frame_info_initialized)
+	stack_page = (unsigned long)p->thread_info;
+	if (!stack_page || !mips_frame_info_initialized)
 		return 0;
+
 	pc = thread_saved_pc(p);
 	if (!in_sched_functions(pc))
-		goto out;
-
-	if (pc >= (unsigned long) sleep_on_timeout)
-		goto schedule_timeout_caller;
-	if (pc >= (unsigned long) sleep_on)
-		goto schedule_caller;
-	if (pc >= (unsigned long) interruptible_sleep_on_timeout)
-		goto schedule_timeout_caller;
-	if (pc >= (unsigned long)interruptible_sleep_on)
-		goto schedule_caller;
-	if (pc >= (unsigned long)wait_for_completion)
-		goto schedule_caller;
-	goto schedule_timeout_caller;
-
-schedule_caller:
-	frame = ((unsigned long *)p->thread.reg30)[schedule_frame.frame_offset];
-	if (pc >= (unsigned long) sleep_on)
-		pc = ((unsigned long *)frame)[sleep_on_frame.pc_offset];
-	else
-		pc = ((unsigned long *)frame)[wait_for_completion_frame.pc_offset];
-	goto out;
+		return pc;
 
-schedule_timeout_caller:
-	/*
-	 * The schedule_timeout frame
-	 */
 	frame = ((unsigned long *)p->thread.reg30)[schedule_frame.frame_offset];
+	do {
+		int i;
 
-	/*
-	 * frame now points to sleep_on_timeout's frame
-	 */
-	pc    = ((unsigned long *)frame)[schedule_timeout_frame.pc_offset];
-
-	if (in_sched_functions(pc)) {
-		/* schedule_timeout called by [interruptible_]sleep_on_timeout */
-		frame = ((unsigned long *)frame)[schedule_timeout_frame.frame_offset];
-		pc    = ((unsigned long *)frame)[sleep_on_timeout_frame.pc_offset];
-	}
+		if (frame < stack_page || frame > stack_page + THREAD_SIZE - 32)
+			return 0;
 
-out:
+		for (i = ARRAY_SIZE(mfinfo) - 1; i >= 0; i--) {
+			if (pc >= (unsigned long) mfinfo[i].func)
+				break;
+		}
+		if (i < 0)
+			break;
 
-#ifdef CONFIG_64BIT
-	if (current->thread.mflags & MF_32BIT_REGS) /* Kludge for 32-bit ps  */
-		pc &= 0xffffffffUL;
-#endif
+		if (mfinfo[i].omit_fp)
+			break;
+		pc = ((unsigned long *)frame)[mfinfo[i].pc_offset];
+		frame = ((unsigned long *)frame)[mfinfo[i].frame_offset];
+	} while (in_sched_functions(pc));
 
 	return pc;
 }
diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c
index 0b571a5b4b83..510da5fda567 100644
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -28,14 +28,18 @@
 #include <linux/security.h>
 #include <linux/signal.h>
 
+#include <asm/byteorder.h>
 #include <asm/cpu.h>
+#include <asm/dsp.h>
 #include <asm/fpu.h>
 #include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/bootinfo.h>
+#include <asm/reg.h>
 
 /*
  * Called by kernel/ptrace.c when detaching..
@@ -47,50 +51,132 @@ void ptrace_disable(struct task_struct *child)
 	/* Nothing to do.. */
 }
 
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+/*
+ * Read a general register set.  We always use the 64-bit format, even
+ * for 32-bit kernels and for 32-bit processes on a 64-bit kernel.
+ * Registers are sign extended to fill the available space.
+ */
+int ptrace_getregs (struct task_struct *child, __s64 __user *data)
 {
-	struct task_struct *child;
-	int ret;
+	struct pt_regs *regs;
+	int i;
 
-#if 0
-	printk("ptrace(r=%d,pid=%d,addr=%08lx,data=%08lx)\n",
-	       (int) request, (int) pid, (unsigned long) addr,
-	       (unsigned long) data);
-#endif
-	lock_kernel();
-	ret = -EPERM;
-	if (request == PTRACE_TRACEME) {
-		/* are we already being traced? */
-		if (current->ptrace & PT_PTRACED)
-			goto out;
-		if ((ret = security_ptrace(current->parent, current)))
-			goto out;
-		/* set the ptrace bit in the process flags. */
-		current->ptrace |= PT_PTRACED;
-		ret = 0;
-		goto out;
+	if (!access_ok(VERIFY_WRITE, data, 38 * 8))
+		return -EIO;
+
+	regs = (struct pt_regs *) ((unsigned long) child->thread_info +
+	       THREAD_SIZE - 32 - sizeof(struct pt_regs));
+
+	for (i = 0; i < 32; i++)
+		__put_user (regs->regs[i], data + i);
+	__put_user (regs->lo, data + EF_LO - EF_R0);
+	__put_user (regs->hi, data + EF_HI - EF_R0);
+	__put_user (regs->cp0_epc, data + EF_CP0_EPC - EF_R0);
+	__put_user (regs->cp0_badvaddr, data + EF_CP0_BADVADDR - EF_R0);
+	__put_user (regs->cp0_status, data + EF_CP0_STATUS - EF_R0);
+	__put_user (regs->cp0_cause, data + EF_CP0_CAUSE - EF_R0);
+
+	return 0;
+}
+
+/*
+ * Write a general register set.  As for PTRACE_GETREGS, we always use
+ * the 64-bit format.  On a 32-bit kernel only the lower order half
+ * (according to endianness) will be used.
+ */
+int ptrace_setregs (struct task_struct *child, __s64 __user *data)
+{
+	struct pt_regs *regs;
+	int i;
+
+	if (!access_ok(VERIFY_READ, data, 38 * 8))
+		return -EIO;
+
+	regs = (struct pt_regs *) ((unsigned long) child->thread_info +
+	       THREAD_SIZE - 32 - sizeof(struct pt_regs));
+
+	for (i = 0; i < 32; i++)
+		__get_user (regs->regs[i], data + i);
+	__get_user (regs->lo, data + EF_LO - EF_R0);
+	__get_user (regs->hi, data + EF_HI - EF_R0);
+	__get_user (regs->cp0_epc, data + EF_CP0_EPC - EF_R0);
+
+	/* badvaddr, status, and cause may not be written.  */
+
+	return 0;
+}
+
+int ptrace_getfpregs (struct task_struct *child, __u32 __user *data)
+{
+	int i;
+
+	if (!access_ok(VERIFY_WRITE, data, 33 * 8))
+		return -EIO;
+
+	if (tsk_used_math(child)) {
+		fpureg_t *fregs = get_fpu_regs(child);
+		for (i = 0; i < 32; i++)
+			__put_user (fregs[i], i + (__u64 __user *) data);
+	} else {
+		for (i = 0; i < 32; i++)
+			__put_user ((__u64) -1, i + (__u64 __user *) data);
 	}
-	ret = -ESRCH;
-	read_lock(&tasklist_lock);
-	child = find_task_by_pid(pid);
-	if (child)
-		get_task_struct(child);
-	read_unlock(&tasklist_lock);
-	if (!child)
-		goto out;
 
-	ret = -EPERM;
-	if (pid == 1)		/* you may not mess with init */
-		goto out_tsk;
+	if (cpu_has_fpu) {
+		unsigned int flags, tmp;
+
+		__put_user (child->thread.fpu.hard.fcr31, data + 64);
 
-	if (request == PTRACE_ATTACH) {
-		ret = ptrace_attach(child);
-		goto out_tsk;
+		preempt_disable();
+		if (cpu_has_mipsmt) {
+			unsigned int vpflags = dvpe();
+			flags = read_c0_status();
+			__enable_fpu();
+			__asm__ __volatile__("cfc1\t%0,$0" : "=r" (tmp));
+			write_c0_status(flags);
+			evpe(vpflags);
+		} else {
+			flags = read_c0_status();
+			__enable_fpu();
+			__asm__ __volatile__("cfc1\t%0,$0" : "=r" (tmp));
+			write_c0_status(flags);
+		}
+		preempt_enable();
+		__put_user (tmp, data + 65);
+	} else {
+		__put_user (child->thread.fpu.soft.fcr31, data + 64);
+		__put_user ((__u32) 0, data + 65);
 	}
 
-	ret = ptrace_check_attach(child, request == PTRACE_KILL);
-	if (ret < 0)
-		goto out_tsk;
+	return 0;
+}
+
+int ptrace_setfpregs (struct task_struct *child, __u32 __user *data)
+{
+	fpureg_t *fregs;
+	int i;
+
+	if (!access_ok(VERIFY_READ, data, 33 * 8))
+		return -EIO;
+
+	fregs = get_fpu_regs(child);
+
+	for (i = 0; i < 32; i++)
+		__get_user (fregs[i], i + (__u64 __user *) data);
+
+	if (cpu_has_fpu)
+		__get_user (child->thread.fpu.hard.fcr31, data + 64);
+	else
+		__get_user (child->thread.fpu.soft.fcr31, data + 64);
+
+	/* FIR may not be written.  */
+
+	return 0;
+}
+
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
+{
+	int ret;
 
 	switch (request) {
 	/* when I and D space are separate, these will need to be fixed. */
@@ -103,7 +189,7 @@ asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
 		ret = -EIO;
 		if (copied != sizeof(tmp))
 			break;
-		ret = put_user(tmp,(unsigned long *) data);
+		ret = put_user(tmp,(unsigned long __user *) data);
 		break;
 	}
 
@@ -169,18 +255,53 @@ asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
 			if (!cpu_has_fpu)
 				break;
 
-			flags = read_c0_status();
-			__enable_fpu();
-			__asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
-			write_c0_status(flags);
+			preempt_disable();
+			if (cpu_has_mipsmt) {
+				unsigned int vpflags = dvpe();
+				flags = read_c0_status();
+				__enable_fpu();
+				__asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
+				write_c0_status(flags);
+				evpe(vpflags);
+			} else {
+				flags = read_c0_status();
+				__enable_fpu();
+				__asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
+				write_c0_status(flags);
+			}
+			preempt_enable();
 			break;
 		}
+		case DSP_BASE ... DSP_BASE + 5: {
+			dspreg_t *dregs;
+
+			if (!cpu_has_dsp) {
+				tmp = 0;
+				ret = -EIO;
+				goto out;
+			}
+			if (child->thread.dsp.used_dsp) {
+				dregs = __get_dsp_regs(child);
+				tmp = (unsigned long) (dregs[addr - DSP_BASE]);
+			} else {
+				tmp = -1;	/* DSP registers yet used  */
+			}
+			break;
+		}
+		case DSP_CONTROL:
+			if (!cpu_has_dsp) {
+				tmp = 0;
+				ret = -EIO;
+				goto out;
+			}
+			tmp = child->thread.dsp.dspcontrol;
+			break;
 		default:
 			tmp = 0;
 			ret = -EIO;
-			goto out_tsk;
+			goto out;
 		}
-		ret = put_user(tmp, (unsigned long *) data);
+		ret = put_user(tmp, (unsigned long __user *) data);
 		break;
 	}
 
@@ -247,6 +368,25 @@ asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
 			else
 				child->thread.fpu.soft.fcr31 = data;
 			break;
+		case DSP_BASE ... DSP_BASE + 5: {
+			dspreg_t *dregs;
+
+			if (!cpu_has_dsp) {
+				ret = -EIO;
+				break;
+			}
+
+			dregs = __get_dsp_regs(child);
+			dregs[addr - DSP_BASE] = data;
+			break;
+		}
+		case DSP_CONTROL:
+			if (!cpu_has_dsp) {
+				ret = -EIO;
+				break;
+			}
+			child->thread.dsp.dspcontrol = data;
+			break;
 		default:
 			/* The rest are not allowed. */
 			ret = -EIO;
@@ -255,6 +395,22 @@ asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
 		break;
 		}
 
+	case PTRACE_GETREGS:
+		ret = ptrace_getregs (child, (__u64 __user *) data);
+		break;
+
+	case PTRACE_SETREGS:
+		ret = ptrace_setregs (child, (__u64 __user *) data);
+		break;
+
+	case PTRACE_GETFPREGS:
+		ret = ptrace_getfpregs (child, (__u32 __user *) data);
+		break;
+
+	case PTRACE_SETFPREGS:
+		ret = ptrace_setfpregs (child, (__u32 __user *) data);
+		break;
+
 	case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
 	case PTRACE_CONT: { /* restart after signal. */
 		ret = -EIO;
@@ -289,35 +445,29 @@ asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
 		ret = ptrace_detach(child, data);
 		break;
 
+	case PTRACE_GET_THREAD_AREA:
+		ret = put_user(child->thread_info->tp_value,
+				(unsigned long __user *) data);
+		break;
+
 	default:
 		ret = ptrace_request(child, request, addr, data);
 		break;
 	}
-
-out_tsk:
-	put_task_struct(child);
-out:
-	unlock_kernel();
+ out:
 	return ret;
 }
 
 static inline int audit_arch(void)
 {
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-#ifdef CONFIG_64BIT
-	if (!(current->thread.mflags & MF_32BIT_REGS))
-		return AUDIT_ARCH_MIPSEL64;
-#endif /* MIPS64 */
-	return AUDIT_ARCH_MIPSEL;
-
-#else /* big endian... */
+	int arch = EM_MIPS;
 #ifdef CONFIG_64BIT
-	if (!(current->thread.mflags & MF_32BIT_REGS))
-		return AUDIT_ARCH_MIPS64;
-#endif /* MIPS64 */
-	return AUDIT_ARCH_MIPS;
-
-#endif /* endian */
+	arch |=  __AUDIT_ARCH_64BIT;
+#endif
+#if defined(__LITTLE_ENDIAN)
+	arch |=  __AUDIT_ARCH_LE;
+#endif
+	return arch;
 }
 
 /*
@@ -327,12 +477,13 @@ static inline int audit_arch(void)
 asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit)
 {
 	if (unlikely(current->audit_context) && entryexit)
-		audit_syscall_exit(current, AUDITSC_RESULT(regs->regs[2]), regs->regs[2]);
+		audit_syscall_exit(current, AUDITSC_RESULT(regs->regs[2]),
+		                   regs->regs[2]);
 
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		goto out;
 	if (!(current->ptrace & PT_PTRACED))
 		goto out;
+	if (!test_thread_flag(TIF_SYSCALL_TRACE))
+		goto out;
 
 	/* The 0x80 provides a way for the tracing parent to distinguish
 	   between a syscall stop and SIGTRAP delivery */
diff --git a/arch/mips/kernel/ptrace32.c b/arch/mips/kernel/ptrace32.c
index eee207969c21..9a9b04972132 100644
--- a/arch/mips/kernel/ptrace32.c
+++ b/arch/mips/kernel/ptrace32.c
@@ -24,17 +24,24 @@
 #include <linux/smp_lock.h>
 #include <linux/user.h>
 #include <linux/security.h>
-#include <linux/signal.h>
 
 #include <asm/cpu.h>
+#include <asm/dsp.h>
 #include <asm/fpu.h>
 #include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/bootinfo.h>
 
+int ptrace_getregs (struct task_struct *child, __s64 __user *data);
+int ptrace_setregs (struct task_struct *child, __s64 __user *data);
+
+int ptrace_getfpregs (struct task_struct *child, __u32 __user *data);
+int ptrace_setfpregs (struct task_struct *child, __u32 __user *data);
+
 /*
  * Tracing a 32-bit process with a 64-bit strace and vice versa will not
  * work.  I don't know how to fix this.
@@ -99,6 +106,35 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data)
 		break;
 	}
 
+	/*
+	 * Read 4 bytes of the other process' storage
+	 *  data is a pointer specifying where the user wants the
+	 *	4 bytes copied into
+	 *  addr is a pointer in the user's storage that contains an 8 byte
+	 *	address in the other process of the 4 bytes that is to be read
+	 * (this is run in a 32-bit process looking at a 64-bit process)
+	 * when I and D space are separate, these will need to be fixed.
+	 */
+	case PTRACE_PEEKTEXT_3264:
+	case PTRACE_PEEKDATA_3264: {
+		u32 tmp;
+		int copied;
+		u32 __user * addrOthers;
+
+		ret = -EIO;
+
+		/* Get the addr in the other process that we want to read */
+		if (get_user(addrOthers, (u32 __user * __user *) (unsigned long) addr) != 0)
+			break;
+
+		copied = access_process_vm(child, (u64)addrOthers, &tmp,
+				sizeof(tmp), 0);
+		if (copied != sizeof(tmp))
+			break;
+		ret = put_user(tmp, (u32 __user *) (unsigned long) data);
+		break;
+	}
+
 	/* Read the word at location addr in the USER area. */
 	case PTRACE_PEEKUSR: {
 		struct pt_regs *regs;
@@ -156,12 +192,44 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data)
 			if (!cpu_has_fpu)
 				break;
 
-			flags = read_c0_status();
-			__enable_fpu();
-			__asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
-			write_c0_status(flags);
+			preempt_disable();
+			if (cpu_has_mipsmt) {
+				unsigned int vpflags = dvpe();
+				flags = read_c0_status();
+				__enable_fpu();
+				__asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
+				write_c0_status(flags);
+				evpe(vpflags);
+			} else {
+				flags = read_c0_status();
+				__enable_fpu();
+				__asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
+				write_c0_status(flags);
+			}
+			preempt_enable();
 			break;
 		}
+		case DSP_BASE ... DSP_BASE + 5:
+			if (!cpu_has_dsp) {
+				tmp = 0;
+				ret = -EIO;
+				goto out_tsk;
+			}
+			if (child->thread.dsp.used_dsp) {
+				dspreg_t *dregs = __get_dsp_regs(child);
+				tmp = (unsigned long) (dregs[addr - DSP_BASE]);
+			} else {
+				tmp = -1;	/* DSP registers yet used  */
+			}
+			break;
+		case DSP_CONTROL:
+			if (!cpu_has_dsp) {
+				tmp = 0;
+				ret = -EIO;
+				goto out_tsk;
+			}
+			tmp = child->thread.dsp.dspcontrol;
+			break;
 		default:
 			tmp = 0;
 			ret = -EIO;
@@ -181,6 +249,31 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data)
 		ret = -EIO;
 		break;
 
+	/*
+	 * Write 4 bytes into the other process' storage
+	 *  data is the 4 bytes that the user wants written
+	 *  addr is a pointer in the user's storage that contains an
+	 *	8 byte address in the other process where the 4 bytes
+	 *	that is to be written
+	 * (this is run in a 32-bit process looking at a 64-bit process)
+	 * when I and D space are separate, these will need to be fixed.
+	 */
+	case PTRACE_POKETEXT_3264:
+	case PTRACE_POKEDATA_3264: {
+		u32 __user * addrOthers;
+
+		/* Get the addr in the other process that we want to write into */
+		ret = -EIO;
+		if (get_user(addrOthers, (u32 __user * __user *) (unsigned long) addr) != 0)
+			break;
+		ret = 0;
+		if (access_process_vm(child, (u64)addrOthers, &data,
+					sizeof(data), 1) == sizeof(data))
+			break;
+		ret = -EIO;
+		break;
+	}
+
 	case PTRACE_POKEUSR: {
 		struct pt_regs *regs;
 		ret = 0;
@@ -231,6 +324,22 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data)
 			else
 				child->thread.fpu.soft.fcr31 = data;
 			break;
+		case DSP_BASE ... DSP_BASE + 5:
+			if (!cpu_has_dsp) {
+				ret = -EIO;
+				break;
+			}
+
+			dspreg_t *dregs = __get_dsp_regs(child);
+			dregs[addr - DSP_BASE] = data;
+			break;
+		case DSP_CONTROL:
+			if (!cpu_has_dsp) {
+				ret = -EIO;
+				break;
+			}
+			child->thread.dsp.dspcontrol = data;
+			break;
 		default:
 			/* The rest are not allowed. */
 			ret = -EIO;
@@ -239,6 +348,22 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data)
 		break;
 		}
 
+	case PTRACE_GETREGS:
+		ret = ptrace_getregs (child, (__u64 __user *) (__u64) data);
+		break;
+
+	case PTRACE_SETREGS:
+		ret = ptrace_setregs (child, (__u64 __user *) (__u64) data);
+		break;
+
+	case PTRACE_GETFPREGS:
+		ret = ptrace_getfpregs (child, (__u32 __user *) (__u64) data);
+		break;
+
+	case PTRACE_SETFPREGS:
+		ret = ptrace_setfpregs (child, (__u32 __user *) (__u64) data);
+		break;
+
 	case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
 	case PTRACE_CONT: { /* restart after signal. */
 		ret = -EIO;
@@ -269,10 +394,25 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data)
 		wake_up_process(child);
 		break;
 
+	case PTRACE_GET_THREAD_AREA:
+		ret = put_user(child->thread_info->tp_value,
+				(unsigned int __user *) (unsigned long) data);
+		break;
+
 	case PTRACE_DETACH: /* detach a process that was attached. */
 		ret = ptrace_detach(child, data);
 		break;
 
+	case PTRACE_GETEVENTMSG:
+		ret = put_user(child->ptrace_message,
+			       (unsigned int __user *) (unsigned long) data);
+		break;
+
+	case PTRACE_GET_THREAD_AREA_3264:
+		ret = put_user(child->thread_info->tp_value,
+				(unsigned long __user *) (unsigned long) data);
+		break;
+
 	default:
 		ret = ptrace_request(child, request, addr, data);
 		break;
diff --git a/arch/mips/kernel/r4k_fpu.S b/arch/mips/kernel/r4k_fpu.S
index 1a14c6b18829..283a98508fc8 100644
--- a/arch/mips/kernel/r4k_fpu.S
+++ b/arch/mips/kernel/r4k_fpu.S
@@ -32,7 +32,7 @@
 
 	.set	noreorder
 	.set	mips3
-	/* Save floating point context */
+
 LEAF(_save_fp_context)
 	cfc1	t1, fcr31
 
@@ -74,9 +74,6 @@ LEAF(_save_fp_context)
 	EX	sdc1 $f28, SC_FPREGS+224(a0)
 	EX	sdc1 $f30, SC_FPREGS+240(a0)
 	EX	sw t1, SC_FPC_CSR(a0)
-	cfc1	t0, $0				# implementation/version
-	EX	sw t0, SC_FPC_EIR(a0)
-
 	jr	ra
 	 li	v0, 0					# success
 	END(_save_fp_context)
diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
new file mode 100644
index 000000000000..1d855112bac2
--- /dev/null
+++ b/arch/mips/kernel/rtlx.c
@@ -0,0 +1,330 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/poll.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <asm/mipsmtregs.h>
+#include <asm/bitops.h>
+#include <asm/cpu.h>
+#include <asm/processor.h>
+#include <asm/rtlx.h>
+#include <asm/uaccess.h>
+
+#define RTLX_TARG_VPE 1
+
+static struct rtlx_info *rtlx;
+static int major;
+static char module_name[] = "rtlx";
+static struct irqaction irq;
+static int irq_num;
+
+static inline int spacefree(int read, int write, int size)
+{
+	if (read == write) {
+		/*
+		 * never fill the buffer completely, so indexes are always
+		 * equal if empty and only empty, or !equal if data available
+		 */
+		return size - 1;
+	}
+
+	return ((read + size - write) % size) - 1;
+}
+
+static struct chan_waitqueues {
+	wait_queue_head_t rt_queue;
+	wait_queue_head_t lx_queue;
+} channel_wqs[RTLX_CHANNELS];
+
+extern void *vpe_get_shared(int index);
+
+static void rtlx_dispatch(struct pt_regs *regs)
+{
+	do_IRQ(MIPSCPU_INT_BASE + MIPS_CPU_RTLX_IRQ, regs);
+}
+
+static irqreturn_t rtlx_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	int i;
+
+	for (i = 0; i < RTLX_CHANNELS; i++) {
+		struct rtlx_channel *chan = &rtlx->channel[i];
+
+		if (chan->lx_read != chan->lx_write)
+			wake_up_interruptible(&channel_wqs[i].lx_queue);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/* call when we have the address of the shared structure from the SP side. */
+static int rtlx_init(struct rtlx_info *rtlxi)
+{
+	int i;
+
+	if (rtlxi->id != RTLX_ID) {
+		printk(KERN_WARNING "no valid RTLX id at 0x%p\n", rtlxi);
+		return -ENOEXEC;
+	}
+
+	/* initialise the wait queues */
+	for (i = 0; i < RTLX_CHANNELS; i++) {
+		init_waitqueue_head(&channel_wqs[i].rt_queue);
+		init_waitqueue_head(&channel_wqs[i].lx_queue);
+	}
+
+	/* set up for interrupt handling */
+	memset(&irq, 0, sizeof(struct irqaction));
+
+	if (cpu_has_vint)
+		set_vi_handler(MIPS_CPU_RTLX_IRQ, rtlx_dispatch);
+
+	irq_num = MIPSCPU_INT_BASE + MIPS_CPU_RTLX_IRQ;
+	irq.handler = rtlx_interrupt;
+	irq.flags = SA_INTERRUPT;
+	irq.name = "RTLX";
+	irq.dev_id = rtlx;
+	setup_irq(irq_num, &irq);
+
+	rtlx = rtlxi;
+
+	return 0;
+}
+
+/* only allow one open process at a time to open each channel */
+static int rtlx_open(struct inode *inode, struct file *filp)
+{
+	int minor, ret;
+	struct rtlx_channel *chan;
+
+	/* assume only 1 device at the mo. */
+	minor = MINOR(inode->i_rdev);
+
+	if (rtlx == NULL) {
+		struct rtlx_info **p;
+		if( (p = vpe_get_shared(RTLX_TARG_VPE)) == NULL) {
+			printk(KERN_ERR "vpe_get_shared is NULL. "
+			       "Has an SP program been loaded?\n");
+			return -EFAULT;
+		}
+
+		if (*p == NULL) {
+			printk(KERN_ERR "vpe_shared %p %p\n", p, *p);
+			return -EFAULT;
+		}
+
+		if ((ret = rtlx_init(*p)) < 0)
+			return ret;
+	}
+
+	chan = &rtlx->channel[minor];
+
+	if (test_and_set_bit(RTLX_STATE_OPENED, &chan->lx_state))
+		return -EBUSY;
+
+	return 0;
+}
+
+static int rtlx_release(struct inode *inode, struct file *filp)
+{
+	int minor = MINOR(inode->i_rdev);
+
+	clear_bit(RTLX_STATE_OPENED, &rtlx->channel[minor].lx_state);
+	smp_mb__after_clear_bit();
+
+	return 0;
+}
+
+static unsigned int rtlx_poll(struct file *file, poll_table * wait)
+{
+	int minor;
+	unsigned int mask = 0;
+	struct rtlx_channel *chan;
+
+	minor = MINOR(file->f_dentry->d_inode->i_rdev);
+	chan = &rtlx->channel[minor];
+
+	poll_wait(file, &channel_wqs[minor].rt_queue, wait);
+	poll_wait(file, &channel_wqs[minor].lx_queue, wait);
+
+	/* data available to read? */
+	if (chan->lx_read != chan->lx_write)
+		mask |= POLLIN | POLLRDNORM;
+
+	/* space to write */
+	if (spacefree(chan->rt_read, chan->rt_write, chan->buffer_size))
+		mask |= POLLOUT | POLLWRNORM;
+
+	return mask;
+}
+
+static ssize_t rtlx_read(struct file *file, char __user * buffer, size_t count,
+			 loff_t * ppos)
+{
+	unsigned long failed;
+	size_t fl = 0L;
+	int minor;
+	struct rtlx_channel *lx;
+	DECLARE_WAITQUEUE(wait, current);
+
+	minor = MINOR(file->f_dentry->d_inode->i_rdev);
+	lx = &rtlx->channel[minor];
+
+	/* data available? */
+	if (lx->lx_write == lx->lx_read) {
+		if (file->f_flags & O_NONBLOCK)
+			return 0;	/* -EAGAIN makes cat whinge */
+
+		/* go to sleep */
+		add_wait_queue(&channel_wqs[minor].lx_queue, &wait);
+		set_current_state(TASK_INTERRUPTIBLE);
+
+		while (lx->lx_write == lx->lx_read)
+			schedule();
+
+		set_current_state(TASK_RUNNING);
+		remove_wait_queue(&channel_wqs[minor].lx_queue, &wait);
+
+		/* back running */
+	}
+
+	/* find out how much in total */
+	count = min(count,
+		    (size_t)(lx->lx_write + lx->buffer_size - lx->lx_read) % lx->buffer_size);
+
+	/* then how much from the read pointer onwards */
+	fl = min(count, (size_t)lx->buffer_size - lx->lx_read);
+
+	failed = copy_to_user (buffer, &lx->lx_buffer[lx->lx_read], fl);
+	if (failed) {
+		count = fl - failed;
+		goto out;
+	}
+
+	/* and if there is anything left at the beginning of the buffer */
+	if (count - fl) {
+		failed = copy_to_user (buffer + fl, lx->lx_buffer, count - fl);
+		if (failed) {
+			count -= failed;
+			goto out;
+		}
+	}
+
+out:
+	/* update the index */
+	lx->lx_read += count;
+	lx->lx_read %= lx->buffer_size;
+
+	return count;
+}
+
+static ssize_t rtlx_write(struct file *file, const char __user * buffer,
+			  size_t count, loff_t * ppos)
+{
+	unsigned long failed;
+	int minor;
+	struct rtlx_channel *rt;
+	size_t fl;
+	DECLARE_WAITQUEUE(wait, current);
+
+	minor = MINOR(file->f_dentry->d_inode->i_rdev);
+	rt = &rtlx->channel[minor];
+
+	/* any space left... */
+	if (!spacefree(rt->rt_read, rt->rt_write, rt->buffer_size)) {
+
+		if (file->f_flags & O_NONBLOCK)
+			return -EAGAIN;
+
+		add_wait_queue(&channel_wqs[minor].rt_queue, &wait);
+		set_current_state(TASK_INTERRUPTIBLE);
+
+		while (!spacefree(rt->rt_read, rt->rt_write, rt->buffer_size))
+			schedule();
+
+		set_current_state(TASK_RUNNING);
+		remove_wait_queue(&channel_wqs[minor].rt_queue, &wait);
+	}
+
+	/* total number of bytes to copy */
+	count = min(count, (size_t)spacefree(rt->rt_read, rt->rt_write, rt->buffer_size) );
+
+	/* first bit from write pointer to the end of the buffer, or count */
+	fl = min(count, (size_t) rt->buffer_size - rt->rt_write);
+
+	failed = copy_from_user(&rt->rt_buffer[rt->rt_write], buffer, fl);
+	if (failed) {
+		count = fl - failed;
+		goto out;
+	}
+
+	/* if there's any left copy to the beginning of the buffer */
+	if (count - fl) {
+		failed = copy_from_user(rt->rt_buffer, buffer + fl, count - fl);
+		if (failed) {
+			count -= failed;
+			goto out;
+		}
+	}
+
+out:
+	rt->rt_write += count;
+	rt->rt_write %= rt->buffer_size;
+
+	return count;
+}
+
+static struct file_operations rtlx_fops = {
+	.owner		= THIS_MODULE,
+	.open		= rtlx_open,
+	.release	= rtlx_release,
+	.write		= rtlx_write,
+	.read		= rtlx_read,
+	.poll		= rtlx_poll
+};
+
+static char register_chrdev_failed[] __initdata =
+	KERN_ERR "rtlx_module_init: unable to register device\n";
+
+static int __init rtlx_module_init(void)
+{
+	major = register_chrdev(0, module_name, &rtlx_fops);
+	if (major < 0) {
+		printk(register_chrdev_failed);
+		return major;
+	}
+
+	return 0;
+}
+
+static void __exit rtlx_module_exit(void)
+{
+	unregister_chrdev(major, module_name);
+}
+
+module_init(rtlx_module_init);
+module_exit(rtlx_module_exit);
+
+MODULE_DESCRIPTION("MIPS RTLX");
+MODULE_AUTHOR("Elizabeth Clarke, MIPS Technologies, Inc.");
+MODULE_LICENSE("GPL");
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 17b5030fb6ea..a42e0e8caa7b 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -94,11 +94,13 @@ syscall_trace_entry:
 	li	a1, 0
 	jal	do_syscall_trace
 
+	move	t0, s0
+	RESTORE_STATIC
 	lw	a0, PT_R4(sp)		# Restore argument registers
 	lw	a1, PT_R5(sp)
 	lw	a2, PT_R6(sp)
 	lw	a3, PT_R7(sp)
-	jalr	s0
+	jalr	t0
 
 	li	t0, -EMAXERRNO - 1	# error?
 	sltu	t0, t0, v0
@@ -241,19 +243,7 @@ illegal_syscall:
 	sw	zero, PT_R7(sp)		# success
 	sw	v0, PT_R2(sp)		# result
 
-	/* Success, so skip usual error handling garbage.  */
-	lw	a2, TI_FLAGS($28)	# syscall tracing enabled?
-	li	t0, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
-	and	t0, a2, t0
-	bnez	t0, 1f
-
-	j	o32_syscall_exit
-
-1:	SAVE_STATIC
-	move	a0, sp
-	li	a1, 1
-	jal	do_syscall_trace
-	j	syscall_exit
+	j	o32_syscall_exit	# continue like a normal syscall
 
 no_mem:	li	v0, -ENOMEM
 	jr	ra
@@ -578,7 +568,7 @@ einval:	li	v0, -EINVAL
 	sys	sys_fremovexattr	2	/* 4235 */
 	sys	sys_tkill		2
 	sys	sys_sendfile64		5
-	sys	sys_futex		2
+	sys	sys_futex		6
 	sys	sys_sched_setaffinity	3
 	sys	sys_sched_getaffinity	3	/* 4240 */
 	sys	sys_io_setup		2
@@ -587,7 +577,7 @@ einval:	li	v0, -EINVAL
 	sys	sys_io_submit		3
 	sys	sys_io_cancel		3	/* 4245 */
 	sys	sys_exit_group		1
-	sys	sys_lookup_dcookie	3
+	sys	sys_lookup_dcookie	4
 	sys	sys_epoll_create	1
 	sys	sys_epoll_ctl		4
 	sys	sys_epoll_wait		3	/* 4250 */
@@ -618,12 +608,15 @@ einval:	li	v0, -EINVAL
 	sys	sys_mq_notify		2	/* 4275 */
 	sys	sys_mq_getsetattr	3
 	sys	sys_ni_syscall		0	/* sys_vserver */
-	sys	sys_waitid		4
+	sys	sys_waitid		5
 	sys	sys_ni_syscall		0	/* available, was setaltroot */
-	sys	sys_add_key		5
+	sys	sys_add_key		5	/* 4280 */
 	sys	sys_request_key		4
 	sys	sys_keyctl		5
-
+	sys	sys_set_thread_area	1
+	sys	sys_inotify_init	0
+	sys	sys_inotify_add_watch	3	/* 4285 */
+	sys	sys_inotify_rm_watch	2
 	.endm
 
 	/* We pre-compute the number of _instruction_ bytes needed to
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index ffb22a2068bf..47bfbd416709 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -93,13 +93,15 @@ syscall_trace_entry:
 	li	a1, 0
 	jal	do_syscall_trace
 
+	move	t0, s0
+	RESTORE_STATIC
 	ld	a0, PT_R4(sp)		# Restore argument registers
 	ld	a1, PT_R5(sp)
 	ld	a2, PT_R6(sp)
 	ld	a3, PT_R7(sp)
 	ld	a4, PT_R8(sp)
 	ld	a5, PT_R9(sp)
-	jalr	s0
+	jalr	t0
 
 	li	t0, -EMAXERRNO - 1	# error?
 	sltu	t0, t0, v0
@@ -174,19 +176,7 @@ illegal_syscall:
 	sd	zero, PT_R7(sp)		# success
 	sd	v0, PT_R2(sp)		# result
 
-	/* Success, so skip usual error handling garbage.  */
-	li	t0, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
-	LONG_L	a2, TI_FLAGS($28)	# syscall tracing enabled?
-	and	t0, a2, t0
-	bnez	t0, 1f
-
-	j	n64_syscall_exit
-
-1:	SAVE_STATIC
-	move	a0, sp
-	li	a1, 1
-	jal	do_syscall_trace
-	j	syscall_exit
+	j	n64_syscall_exit	# continue like a normal syscall
 
 no_mem:	li	v0, -ENOMEM
 	jr	ra
@@ -449,3 +439,7 @@ sys_call_table:
 	PTR	sys_add_key
 	PTR	sys_request_key			/* 5240 */
 	PTR	sys_keyctl
+	PTR	sys_set_thread_area
+	PTR	sys_inotify_init
+	PTR	sys_inotify_add_watch
+	PTR	sys_inotify_rm_watch		/* 5245 */
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index e52049c87bc3..b465ced1758f 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -90,13 +90,15 @@ n32_syscall_trace_entry:
 	li	a1, 0
 	jal	do_syscall_trace
 
+	move	t0, s0
+	RESTORE_STATIC
 	ld	a0, PT_R4(sp)		# Restore argument registers
 	ld	a1, PT_R5(sp)
 	ld	a2, PT_R6(sp)
 	ld	a3, PT_R7(sp)
 	ld	a4, PT_R8(sp)
 	ld	a5, PT_R9(sp)
-	jalr	s0
+	jalr	t0
 
 	li	t0, -EMAXERRNO - 1	# error?
 	sltu	t0, t0, v0
@@ -176,7 +178,7 @@ EXPORT(sysn32_call_table)
 	PTR	sys_fork
 	PTR	sys32_execve
 	PTR	sys_exit
-	PTR	sys32_wait4
+	PTR	compat_sys_wait4
 	PTR	sys_kill			/* 6060 */
 	PTR	sys32_newuname
 	PTR	sys_semget
@@ -216,7 +218,7 @@ EXPORT(sysn32_call_table)
 	PTR	compat_sys_getrusage
 	PTR	sys32_sysinfo
 	PTR	compat_sys_times
-	PTR	sys_ptrace
+	PTR	sys32_ptrace
 	PTR	sys_getuid			/* 6100 */
 	PTR	sys_syslog
 	PTR	sys_getgid
@@ -243,14 +245,14 @@ EXPORT(sysn32_call_table)
 	PTR	sys_capget
 	PTR	sys_capset
 	PTR	sys32_rt_sigpending		/* 6125 */
-	PTR	compat_sys_rt_sigtimedwait
-	PTR	sys32_rt_sigqueueinfo
+	PTR	sysn32_rt_sigtimedwait
+	PTR	sys_rt_sigqueueinfo
 	PTR	sys32_rt_sigsuspend
 	PTR	sys32_sigaltstack
 	PTR	compat_sys_utime		/* 6130 */
 	PTR	sys_mknod
 	PTR	sys32_personality
-	PTR	sys_ustat
+	PTR	sys32_ustat
 	PTR	compat_sys_statfs
 	PTR	compat_sys_fstatfs		/* 6135 */
 	PTR	sys_sysfs
@@ -329,7 +331,7 @@ EXPORT(sysn32_call_table)
 	PTR	sys_epoll_wait
 	PTR	sys_remap_file_pages		/* 6210 */
 	PTR	sysn32_rt_sigreturn
-	PTR	sys_fcntl
+	PTR	compat_sys_fcntl64
 	PTR	sys_set_tid_address
 	PTR	sys_restart_syscall
 	PTR	sys_semtimedop			/* 6215 */
@@ -337,15 +339,15 @@ EXPORT(sysn32_call_table)
 	PTR	compat_sys_statfs64
 	PTR	compat_sys_fstatfs64
 	PTR	sys_sendfile64
-	PTR	sys_timer_create		/* 6220 */
-	PTR	sys_timer_settime
-	PTR	sys_timer_gettime
+	PTR	sys32_timer_create		/* 6220 */
+	PTR	compat_sys_timer_settime
+	PTR	compat_sys_timer_gettime
 	PTR	sys_timer_getoverrun
 	PTR	sys_timer_delete
-	PTR	sys_clock_settime		/* 6225 */
-	PTR	sys_clock_gettime
-	PTR	sys_clock_getres
-	PTR	sys_clock_nanosleep
+	PTR	compat_sys_clock_settime		/* 6225 */
+	PTR	compat_sys_clock_gettime
+	PTR	compat_sys_clock_getres
+	PTR	compat_sys_clock_nanosleep
 	PTR	sys_tgkill
 	PTR	compat_sys_utimes		/* 6230 */
 	PTR	sys_ni_syscall			/* sys_mbind */
@@ -358,8 +360,12 @@ EXPORT(sysn32_call_table)
 	PTR	compat_sys_mq_notify
 	PTR	compat_sys_mq_getsetattr
 	PTR	sys_ni_syscall			/* 6240, sys_vserver */
-	PTR	sys_waitid
+	PTR	sysn32_waitid
 	PTR	sys_ni_syscall			/* available, was setaltroot */
 	PTR	sys_add_key
 	PTR	sys_request_key
 	PTR	sys_keyctl			/* 6245 */
+	PTR	sys_set_thread_area
+	PTR	sys_inotify_init
+	PTR	sys_inotify_add_watch
+	PTR	sys_inotify_rm_watch
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 739f3998d76b..3d338ca7eeeb 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -124,6 +124,8 @@ trace_a_syscall:
 	li	a1, 0
 	jal	do_syscall_trace
 
+	move	t0, s0
+	RESTORE_STATIC
 	ld	a0, PT_R4(sp)		# Restore argument registers
 	ld	a1, PT_R5(sp)
 	ld	a2, PT_R6(sp)
@@ -132,7 +134,7 @@ trace_a_syscall:
 	ld	a5, PT_R9(sp)
 	ld	a6, PT_R10(sp)
 	ld	a7, PT_R11(sp)		# For indirect syscalls
-	jalr	s0
+	jalr	t0
 
 	li	t0, -EMAXERRNO - 1	# error?
 	sltu	t0, t0, v0
@@ -316,13 +318,13 @@ sys_call_table:
 	PTR	sys_vhangup
 	PTR	sys_ni_syscall			/* was sys_idle	 */
 	PTR	sys_ni_syscall			/* sys_vm86 */
-	PTR	sys32_wait4
+	PTR	compat_sys_wait4
 	PTR	sys_swapoff			/* 4115 */
 	PTR	sys32_sysinfo
 	PTR	sys32_ipc
 	PTR	sys_fsync
 	PTR	sys32_sigreturn
-	PTR	sys_clone			/* 4120 */
+	PTR	sys32_clone			/* 4120 */
 	PTR	sys_setdomainname
 	PTR	sys32_newuname
 	PTR	sys_ni_syscall			/* sys_modify_ldt */
@@ -391,7 +393,7 @@ sys_call_table:
 	PTR	sys_getresuid
 	PTR	sys_ni_syscall			/* was query_module */
 	PTR	sys_poll
-	PTR	sys_nfsservctl
+	PTR	compat_sys_nfsservctl
 	PTR	sys_setresgid			/* 4190 */
 	PTR	sys_getresgid
 	PTR	sys_prctl
@@ -459,7 +461,7 @@ sys_call_table:
 	PTR	sys_fadvise64_64
 	PTR	compat_sys_statfs64		/* 4255 */
 	PTR	compat_sys_fstatfs64
-	PTR	sys_timer_create
+	PTR	sys32_timer_create
 	PTR	compat_sys_timer_settime
 	PTR	compat_sys_timer_gettime
 	PTR	sys_timer_getoverrun		/* 4260 */
@@ -480,9 +482,13 @@ sys_call_table:
 	PTR	compat_sys_mq_notify		/* 4275 */
 	PTR	compat_sys_mq_getsetattr
 	PTR	sys_ni_syscall			/* sys_vserver */
-	PTR	sys_waitid
+	PTR	sys32_waitid
 	PTR	sys_ni_syscall			/* available, was setaltroot */
 	PTR	sys_add_key			/* 4280 */
 	PTR	sys_request_key
 	PTR	sys_keyctl
+	PTR	sys_set_thread_area
+	PTR	sys_inotify_init
+	PTR	sys_inotify_add_watch		/* 4285 */
+	PTR	sys_inotify_rm_watch
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/semaphore.c b/arch/mips/kernel/semaphore.c
index 9c40fe5a8e8d..1265358cdca1 100644
--- a/arch/mips/kernel/semaphore.c
+++ b/arch/mips/kernel/semaphore.c
@@ -42,24 +42,28 @@ static inline int __sem_update_count(struct semaphore *sem, int incr)
 
 	if (cpu_has_llsc && R10000_LLSC_WAR) {
 		__asm__ __volatile__(
-		"1:	ll	%0, %2					\n"
+		"	.set	mips3					\n"
+		"1:	ll	%0, %2		# __sem_update_count	\n"
 		"	sra	%1, %0, 31				\n"
 		"	not	%1					\n"
 		"	and	%1, %0, %1				\n"
-		"	add	%1, %1, %3				\n"
+		"	addu	%1, %1, %3				\n"
 		"	sc	%1, %2					\n"
 		"	beqzl	%1, 1b					\n"
+		"	.set	mips0					\n"
 		: "=&r" (old_count), "=&r" (tmp), "=m" (sem->count)
 		: "r" (incr), "m" (sem->count));
 	} else if (cpu_has_llsc) {
 		__asm__ __volatile__(
-		"1:	ll	%0, %2					\n"
+		"	.set	mips3					\n"
+		"1:	ll	%0, %2		# __sem_update_count	\n"
 		"	sra	%1, %0, 31				\n"
 		"	not	%1					\n"
 		"	and	%1, %0, %1				\n"
-		"	add	%1, %1, %3				\n"
+		"	addu	%1, %1, %3				\n"
 		"	sc	%1, %2					\n"
 		"	beqz	%1, 1b					\n"
+		"	.set	mips0					\n"
 		: "=&r" (old_count), "=&r" (tmp), "=m" (sem->count)
 		: "r" (incr), "m" (sem->count));
 	} else {
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 12b531c295c4..d86affa21278 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -37,12 +37,13 @@
 
 #include <asm/addrspace.h>
 #include <asm/bootinfo.h>
+#include <asm/cache.h>
 #include <asm/cpu.h>
 #include <asm/sections.h>
 #include <asm/setup.h>
 #include <asm/system.h>
 
-struct cpuinfo_mips cpu_data[NR_CPUS];
+struct cpuinfo_mips cpu_data[NR_CPUS] __read_mostly;
 
 EXPORT_SYMBOL(cpu_data);
 
@@ -62,8 +63,8 @@ EXPORT_SYMBOL(PCI_DMA_BUS_IS_PHYS);
  *
  * These are initialized so they are in the .data section
  */
-unsigned long mips_machtype = MACH_UNKNOWN;
-unsigned long mips_machgroup = MACH_GROUP_UNKNOWN;
+unsigned long mips_machtype __read_mostly = MACH_UNKNOWN;
+unsigned long mips_machgroup __read_mostly = MACH_GROUP_UNKNOWN;
 
 EXPORT_SYMBOL(mips_machtype);
 EXPORT_SYMBOL(mips_machgroup);
@@ -77,7 +78,7 @@ static char command_line[CL_SIZE];
  * mips_io_port_base is the begin of the address space to which x86 style
  * I/O ports are mapped.
  */
-const unsigned long mips_io_port_base = -1;
+const unsigned long mips_io_port_base __read_mostly = -1;
 EXPORT_SYMBOL(mips_io_port_base);
 
 /*
@@ -510,31 +511,7 @@ static inline void resource_init(void)
 #undef MAXMEM
 #undef MAXMEM_PFN
 
-static int __initdata earlyinit_debug;
-
-static int __init earlyinit_debug_setup(char *str)
-{
-	earlyinit_debug = 1;
-	return 1;
-}
-__setup("earlyinit_debug", earlyinit_debug_setup);
-
-extern initcall_t __earlyinitcall_start, __earlyinitcall_end;
-
-static void __init do_earlyinitcalls(void)
-{
-	initcall_t *call, *start, *end;
-
-	start = &__earlyinitcall_start;
-	end = &__earlyinitcall_end;
-
-	for (call = start; call < end; call++) {
-		if (earlyinit_debug)
-			printk("calling earlyinitcall 0x%p\n", *call);
-
-		(*call)();
-	}
-}
+extern void plat_setup(void);
 
 void __init setup_arch(char **cmdline_p)
 {
@@ -551,7 +528,7 @@ void __init setup_arch(char **cmdline_p)
 #endif
 
 	/* call board setup routine */
-	do_earlyinitcalls();
+	plat_setup();
 
 	strlcpy(command_line, arcs_cmdline, sizeof(command_line));
 	strlcpy(saved_command_line, command_line, COMMAND_LINE_SIZE);
@@ -573,3 +550,12 @@ int __init fpu_disable(char *s)
 }
 
 __setup("nofpu", fpu_disable);
+
+int __init dsp_disable(char *s)
+{
+	cpu_data[0].ases &= ~MIPS_ASE_DSP;
+
+	return 1;
+}
+
+__setup("nodsp", dsp_disable);
diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h
index f9234df53253..0f66ae5838b9 100644
--- a/arch/mips/kernel/signal-common.h
+++ b/arch/mips/kernel/signal-common.h
@@ -8,13 +8,14 @@
  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
  */
 
+#include <linux/config.h>
+
 static inline int
 setup_sigcontext(struct pt_regs *regs, struct sigcontext *sc)
 {
 	int err = 0;
 
 	err |= __put_user(regs->cp0_epc, &sc->sc_pc);
-	err |= __put_user(regs->cp0_status, &sc->sc_status);
 
 #define save_gp_reg(i) do {						\
 	err |= __put_user(regs->regs[i], &sc->sc_regs[i]);		\
@@ -30,10 +31,32 @@ setup_sigcontext(struct pt_regs *regs, struct sigcontext *sc)
 	save_gp_reg(31);
 #undef save_gp_reg
 
+#ifdef CONFIG_32BIT
 	err |= __put_user(regs->hi, &sc->sc_mdhi);
 	err |= __put_user(regs->lo, &sc->sc_mdlo);
-	err |= __put_user(regs->cp0_cause, &sc->sc_cause);
-	err |= __put_user(regs->cp0_badvaddr, &sc->sc_badvaddr);
+	if (cpu_has_dsp) {
+		err |= __put_user(mfhi1(), &sc->sc_hi1);
+		err |= __put_user(mflo1(), &sc->sc_lo1);
+		err |= __put_user(mfhi2(), &sc->sc_hi2);
+		err |= __put_user(mflo2(), &sc->sc_lo2);
+		err |= __put_user(mfhi3(), &sc->sc_hi3);
+		err |= __put_user(mflo3(), &sc->sc_lo3);
+		err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp);
+	}
+#endif
+#ifdef CONFIG_64BIT
+	err |= __put_user(regs->hi, &sc->sc_hi[0]);
+	err |= __put_user(regs->lo, &sc->sc_lo[0]);
+	if (cpu_has_dsp) {
+		err |= __put_user(mfhi1(), &sc->sc_hi[1]);
+		err |= __put_user(mflo1(), &sc->sc_lo[1]);
+		err |= __put_user(mfhi2(), &sc->sc_hi[2]);
+		err |= __put_user(mflo2(), &sc->sc_lo[2]);
+		err |= __put_user(mfhi3(), &sc->sc_hi[3]);
+		err |= __put_user(mflo3(), &sc->sc_lo[3]);
+		err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp);
+	}
+#endif
 
 	err |= __put_user(!!used_math(), &sc->sc_used_math);
 
@@ -61,15 +84,40 @@ out:
 static inline int
 restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc)
 {
-	int err = 0;
 	unsigned int used_math;
+	unsigned long treg;
+	int err = 0;
 
 	/* Always make any pending restarted system calls return -EINTR */
 	current_thread_info()->restart_block.fn = do_no_restart_syscall;
 
 	err |= __get_user(regs->cp0_epc, &sc->sc_pc);
+#ifdef CONFIG_32BIT
 	err |= __get_user(regs->hi, &sc->sc_mdhi);
 	err |= __get_user(regs->lo, &sc->sc_mdlo);
+	if (cpu_has_dsp) {
+		err |= __get_user(treg, &sc->sc_hi1); mthi1(treg);
+		err |= __get_user(treg, &sc->sc_lo1); mtlo1(treg);
+		err |= __get_user(treg, &sc->sc_hi2); mthi2(treg);
+		err |= __get_user(treg, &sc->sc_lo2); mtlo2(treg);
+		err |= __get_user(treg, &sc->sc_hi3); mthi3(treg);
+		err |= __get_user(treg, &sc->sc_lo3); mtlo3(treg);
+		err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK);
+	}
+#endif
+#ifdef CONFIG_64BIT
+	err |= __get_user(regs->hi, &sc->sc_hi[0]);
+	err |= __get_user(regs->lo, &sc->sc_lo[0]);
+	if (cpu_has_dsp) {
+		err |= __get_user(treg, &sc->sc_hi[1]); mthi1(treg);
+		err |= __get_user(treg, &sc->sc_lo[1]); mthi1(treg);
+		err |= __get_user(treg, &sc->sc_hi[2]); mthi2(treg);
+		err |= __get_user(treg, &sc->sc_lo[2]); mthi2(treg);
+		err |= __get_user(treg, &sc->sc_hi[3]); mthi3(treg);
+		err |= __get_user(treg, &sc->sc_lo[3]); mthi3(treg);
+		err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK);
+	}
+#endif
 
 #define restore_gp_reg(i) do {						\
 	err |= __get_user(regs->regs[i], &sc->sc_regs[i]);		\
@@ -112,7 +160,7 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc)
 static inline void *
 get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
 {
-	unsigned long sp, almask;
+	unsigned long sp;
 
 	/* Default to using normal stack */
 	sp = regs->regs[29];
@@ -128,10 +176,32 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
 	if ((ka->sa.sa_flags & SA_ONSTACK) && (sas_ss_flags (sp) == 0))
 		sp = current->sas_ss_sp + current->sas_ss_size;
 
-	if (PLAT_TRAMPOLINE_STUFF_LINE)
-		almask = ~(PLAT_TRAMPOLINE_STUFF_LINE - 1);
-	else
-		almask = ALMASK;
+	return (void *)((sp - frame_size) & (ICACHE_REFILLS_WORKAROUND_WAR ? 32 : ALMASK));
+}
+
+static inline int install_sigtramp(unsigned int __user *tramp,
+	unsigned int syscall)
+{
+	int err;
+
+	/*
+	 * Set up the return code ...
+	 *
+	 *         li      v0, __NR__foo_sigreturn
+	 *         syscall
+	 */
+
+	err = __put_user(0x24020000 + syscall, tramp + 0);
+	err |= __put_user(0x0000000c          , tramp + 1);
+	if (ICACHE_REFILLS_WORKAROUND_WAR) {
+		err |= __put_user(0, tramp + 2);
+		err |= __put_user(0, tramp + 3);
+		err |= __put_user(0, tramp + 4);
+		err |= __put_user(0, tramp + 5);
+		err |= __put_user(0, tramp + 6);
+		err |= __put_user(0, tramp + 7);
+	}
+	flush_cache_sigtramp((unsigned long) tramp);
 
-	return (void *)((sp - frame_size) & almask);
+	return err;
 }
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index 0209c1dd1429..7d1800fe7038 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -8,6 +8,7 @@
  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
  */
 #include <linux/config.h>
+#include <linux/cache.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/personality.h>
@@ -21,6 +22,7 @@
 #include <linux/unistd.h>
 #include <linux/compiler.h>
 
+#include <asm/abi.h>
 #include <asm/asm.h>
 #include <linux/bitops.h>
 #include <asm/cacheflush.h>
@@ -29,6 +31,7 @@
 #include <asm/uaccess.h>
 #include <asm/ucontext.h>
 #include <asm/cpu-features.h>
+#include <asm/war.h>
 
 #include "signal-common.h"
 
@@ -36,7 +39,7 @@
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
-static int do_signal(sigset_t *oldset, struct pt_regs *regs);
+int do_signal(sigset_t *oldset, struct pt_regs *regs);
 
 /*
  * Atomically swap in the new signal mask, and wait for a signal.
@@ -47,9 +50,10 @@ save_static_function(sys_sigsuspend);
 __attribute_used__ noinline static int
 _sys_sigsuspend(nabi_no_regargs struct pt_regs regs)
 {
-	sigset_t *uset, saveset, newset;
+	sigset_t saveset, newset;
+	sigset_t __user *uset;
 
-	uset = (sigset_t *) regs.regs[4];
+	uset = (sigset_t __user *) regs.regs[4];
 	if (copy_from_user(&newset, uset, sizeof(sigset_t)))
 		return -EFAULT;
 	sigdelsetmask(&newset, ~_BLOCKABLE);
@@ -75,7 +79,8 @@ save_static_function(sys_rt_sigsuspend);
 __attribute_used__ noinline static int
 _sys_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
 {
-	sigset_t *unewset, saveset, newset;
+	sigset_t saveset, newset;
+	sigset_t __user *unewset;
 	size_t sigsetsize;
 
 	/* XXX Don't preclude handling different sized sigset_t's.  */
@@ -83,7 +88,7 @@ _sys_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
 	if (sigsetsize != sizeof(sigset_t))
 		return -EINVAL;
 
-	unewset = (sigset_t *) regs.regs[4];
+	unewset = (sigset_t __user *) regs.regs[4];
 	if (copy_from_user(&newset, unewset, sizeof(newset)))
 		return -EFAULT;
 	sigdelsetmask(&newset, ~_BLOCKABLE);
@@ -147,33 +152,46 @@ asmlinkage int sys_sigaction(int sig, const struct sigaction *act,
 
 asmlinkage int sys_sigaltstack(nabi_no_regargs struct pt_regs regs)
 {
-	const stack_t *uss = (const stack_t *) regs.regs[4];
-	stack_t *uoss = (stack_t *) regs.regs[5];
+	const stack_t __user *uss = (const stack_t __user *) regs.regs[4];
+	stack_t __user *uoss = (stack_t __user *) regs.regs[5];
 	unsigned long usp = regs.regs[29];
 
 	return do_sigaltstack(uss, uoss, usp);
 }
 
-#if PLAT_TRAMPOLINE_STUFF_LINE
-#define __tramp __attribute__((aligned(PLAT_TRAMPOLINE_STUFF_LINE)))
-#else
-#define __tramp
-#endif
-
+/*
+ * Horribly complicated - with the bloody RM9000 workarounds enabled
+ * the signal trampolines is moving to the end of the structure so we can
+ * increase the alignment without breaking software compatibility.
+ */
 #ifdef CONFIG_TRAD_SIGNALS
 struct sigframe {
 	u32 sf_ass[4];			/* argument save space for o32 */
-	u32 sf_code[2] __tramp;		/* signal trampoline */
-	struct sigcontext sf_sc __tramp;
+#if ICACHE_REFILLS_WORKAROUND_WAR
+	u32 sf_pad[2];
+#else
+	u32 sf_code[2];			/* signal trampoline */
+#endif
+	struct sigcontext sf_sc;
 	sigset_t sf_mask;
+#if ICACHE_REFILLS_WORKAROUND_WAR
+	u32 sf_code[8] ____cacheline_aligned;	/* signal trampoline */
+#endif
 };
 #endif
 
 struct rt_sigframe {
 	u32 rs_ass[4];			/* argument save space for o32 */
-	u32 rs_code[2] __tramp;		/* signal trampoline */
-	struct siginfo rs_info __tramp;
+#if ICACHE_REFILLS_WORKAROUND_WAR
+	u32 rs_pad[2];
+#else
+	u32 rs_code[2];			/* signal trampoline */
+#endif
+	struct siginfo rs_info;
 	struct ucontext rs_uc;
+#if ICACHE_REFILLS_WORKAROUND_WAR
+	u32 rs_code[8] ____cacheline_aligned;	/* signal trampoline */
+#endif
 };
 
 #ifdef CONFIG_TRAD_SIGNALS
@@ -202,8 +220,6 @@ _sys_sigreturn(nabi_no_regargs struct pt_regs regs)
 	/*
 	 * Don't let your children do this ...
 	 */
-	if (current_thread_info()->flags & TIF_SYSCALL_TRACE)
-		do_syscall_trace(&regs, 1);
 	__asm__ __volatile__(
 		"move\t$29, %0\n\t"
 		"j\tsyscall_exit"
@@ -214,7 +230,7 @@ _sys_sigreturn(nabi_no_regargs struct pt_regs regs)
 badframe:
 	force_sig(SIGSEGV, current);
 }
-#endif
+#endif /* CONFIG_TRAD_SIGNALS */
 
 save_static_function(sys_rt_sigreturn);
 __attribute_used__ noinline static void
@@ -260,7 +276,7 @@ badframe:
 }
 
 #ifdef CONFIG_TRAD_SIGNALS
-static void inline setup_frame(struct k_sigaction * ka, struct pt_regs *regs,
+int setup_frame(struct k_sigaction * ka, struct pt_regs *regs,
 	int signr, sigset_t *set)
 {
 	struct sigframe *frame;
@@ -270,17 +286,7 @@ static void inline setup_frame(struct k_sigaction * ka, struct pt_regs *regs,
 	if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame)))
 		goto give_sigsegv;
 
-	/*
-	 * Set up the return code ...
-	 *
-	 *         li      v0, __NR_sigreturn
-	 *         syscall
-	 */
-	if (PLAT_TRAMPOLINE_STUFF_LINE)
-		__clear_user(frame->sf_code, PLAT_TRAMPOLINE_STUFF_LINE);
-	err |= __put_user(0x24020000 + __NR_sigreturn, frame->sf_code + 0);
-	err |= __put_user(0x0000000c                 , frame->sf_code + 1);
-	flush_cache_sigtramp((unsigned long) frame->sf_code);
+	install_sigtramp(frame->sf_code, __NR_sigreturn);
 
 	err |= setup_sigcontext(regs, &frame->sf_sc);
 	err |= __copy_to_user(&frame->sf_mask, set, sizeof(*set));
@@ -309,14 +315,15 @@ static void inline setup_frame(struct k_sigaction * ka, struct pt_regs *regs,
 	       current->comm, current->pid,
 	       frame, regs->cp0_epc, frame->regs[31]);
 #endif
-        return;
+        return 1;
 
 give_sigsegv:
 	force_sigsegv(signr, current);
+	return 0;
 }
 #endif
 
-static void inline setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
+int setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
 	int signr, sigset_t *set, siginfo_t *info)
 {
 	struct rt_sigframe *frame;
@@ -326,17 +333,7 @@ static void inline setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
 	if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame)))
 		goto give_sigsegv;
 
-	/*
-	 * Set up the return code ...
-	 *
-	 *         li      v0, __NR_rt_sigreturn
-	 *         syscall
-	 */
-	if (PLAT_TRAMPOLINE_STUFF_LINE)
-		__clear_user(frame->rs_code, PLAT_TRAMPOLINE_STUFF_LINE);
-	err |= __put_user(0x24020000 + __NR_rt_sigreturn, frame->rs_code + 0);
-	err |= __put_user(0x0000000c                    , frame->rs_code + 1);
-	flush_cache_sigtramp((unsigned long) frame->rs_code);
+	install_sigtramp(frame->rs_code, __NR_rt_sigreturn);
 
 	/* Create siginfo.  */
 	err |= copy_siginfo_to_user(&frame->rs_info, info);
@@ -378,18 +375,18 @@ static void inline setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
 	       current->comm, current->pid,
 	       frame, regs->cp0_epc, regs->regs[31]);
 #endif
-	return;
+	return 1;
 
 give_sigsegv:
 	force_sigsegv(signr, current);
+	return 0;
 }
 
-extern void setup_rt_frame_n32(struct k_sigaction * ka,
-	struct pt_regs *regs, int signr, sigset_t *set, siginfo_t *info);
-
-static inline void handle_signal(unsigned long sig, siginfo_t *info,
+static inline int handle_signal(unsigned long sig, siginfo_t *info,
 	struct k_sigaction *ka, sigset_t *oldset, struct pt_regs *regs)
 {
+	int ret;
+
 	switch(regs->regs[0]) {
 	case ERESTART_RESTARTBLOCK:
 	case ERESTARTNOHAND:
@@ -408,22 +405,10 @@ static inline void handle_signal(unsigned long sig, siginfo_t *info,
 
 	regs->regs[0] = 0;		/* Don't deal with this again.  */
 
-#ifdef CONFIG_TRAD_SIGNALS
-	if (ka->sa.sa_flags & SA_SIGINFO) {
-#else
-	if (1) {
-#endif
-#ifdef CONFIG_MIPS32_N32
-		if ((current->thread.mflags & MF_ABI_MASK) == MF_N32)
-			setup_rt_frame_n32 (ka, regs, sig, oldset, info);
-		else
-#endif
-			setup_rt_frame(ka, regs, sig, oldset, info);
-	}
-#ifdef CONFIG_TRAD_SIGNALS
+	if (sig_uses_siginfo(ka))
+		ret = current->thread.abi->setup_rt_frame(ka, regs, sig, oldset, info);
 	else
-		setup_frame(ka, regs, sig, oldset);
-#endif
+		ret = current->thread.abi->setup_frame(ka, regs, sig, oldset);
 
 	spin_lock_irq(&current->sighand->siglock);
 	sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
@@ -431,23 +416,16 @@ static inline void handle_signal(unsigned long sig, siginfo_t *info,
 		sigaddset(&current->blocked,sig);
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
-}
 
-extern int do_signal32(sigset_t *oldset, struct pt_regs *regs);
-extern int do_irix_signal(sigset_t *oldset, struct pt_regs *regs);
+	return ret;
+}
 
-static int do_signal(sigset_t *oldset, struct pt_regs *regs)
+int do_signal(sigset_t *oldset, struct pt_regs *regs)
 {
 	struct k_sigaction ka;
 	siginfo_t info;
 	int signr;
 
-#ifdef CONFIG_BINFMT_ELF32
-	if ((current->thread.mflags & MF_ABI_MASK) == MF_O32) {
-		return do_signal32(oldset, regs);
-	}
-#endif
-
 	/*
 	 * We want the common case to go fast, which is why we may in certain
 	 * cases get here from kernel mode. Just return without doing anything
@@ -463,10 +441,8 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs)
 		oldset = &current->blocked;
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
-	if (signr > 0) {
-		handle_signal(signr, &info, &ka, oldset, regs);
-		return 1;
-	}
+	if (signr > 0)
+		return handle_signal(signr, &info, &ka, oldset, regs);
 
 no_signal:
 	/*
@@ -499,18 +475,6 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, sigset_t *oldset,
 {
 	/* deal with pending signal delivery */
 	if (thread_info_flags & _TIF_SIGPENDING) {
-#ifdef CONFIG_BINFMT_ELF32
-		if (likely((current->thread.mflags & MF_ABI_MASK) == MF_O32)) {
-			do_signal32(oldset, regs);
-			return;
-		}
-#endif
-#ifdef CONFIG_BINFMT_IRIX
-		if (unlikely(current->personality != PER_LINUX)) {
-			do_irix_signal(oldset, regs);
-			return;
-		}
-#endif
-		do_signal(oldset, regs);
+		current->thread.abi->do_signal(oldset, regs);
 	}
 }
diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c
index 8ddfbd8d425a..c856dbc52abb 100644
--- a/arch/mips/kernel/signal32.c
+++ b/arch/mips/kernel/signal32.c
@@ -7,6 +7,7 @@
  * Copyright (C) 1994 - 2000  Ralf Baechle
  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
  */
+#include <linux/cache.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
@@ -21,6 +22,7 @@
 #include <linux/suspend.h>
 #include <linux/compiler.h>
 
+#include <asm/abi.h>
 #include <asm/asm.h>
 #include <linux/bitops.h>
 #include <asm/cacheflush.h>
@@ -29,6 +31,7 @@
 #include <asm/ucontext.h>
 #include <asm/system.h>
 #include <asm/fpu.h>
+#include <asm/war.h>
 
 #define SI_PAD_SIZE32   ((SI_MAX_SIZE/sizeof(int)) - 3)
 
@@ -76,8 +79,10 @@ typedef struct compat_siginfo {
 
 		/* POSIX.1b timers */
 		struct {
-			unsigned int _timer1;
-			unsigned int _timer2;
+			timer_t _tid;		/* timer id */
+			int _overrun;		/* overrun count */
+			compat_sigval_t _sigval;/* same as below */
+			int _sys_private;       /* not to be passed to user */
 		} _timer;
 
 		/* POSIX.1b signals */
@@ -259,11 +264,12 @@ asmlinkage int sys32_sigaction(int sig, const struct sigaction32 *act,
 
 	if (act) {
 		old_sigset_t mask;
+		s32 handler;
 
 		if (!access_ok(VERIFY_READ, act, sizeof(*act)))
 			return -EFAULT;
-		err |= __get_user((u32)(u64)new_ka.sa.sa_handler,
-		                  &act->sa_handler);
+		err |= __get_user(handler, &act->sa_handler);
+		new_ka.sa.sa_handler = (void*)(s64)handler;
 		err |= __get_user(new_ka.sa.sa_flags, &act->sa_flags);
 		err |= __get_user(mask, &act->sa_mask.sig[0]);
 		if (err)
@@ -331,8 +337,9 @@ asmlinkage int sys32_sigaltstack(nabi_no_regargs struct pt_regs regs)
 
 static int restore_sigcontext32(struct pt_regs *regs, struct sigcontext32 *sc)
 {
+	u32 used_math;
 	int err = 0;
-	__u32 used_math;
+	s32 treg;
 
 	/* Always make any pending restarted system calls return -EINTR */
 	current_thread_info()->restart_block.fn = do_no_restart_syscall;
@@ -340,6 +347,15 @@ static int restore_sigcontext32(struct pt_regs *regs, struct sigcontext32 *sc)
 	err |= __get_user(regs->cp0_epc, &sc->sc_pc);
 	err |= __get_user(regs->hi, &sc->sc_mdhi);
 	err |= __get_user(regs->lo, &sc->sc_mdlo);
+	if (cpu_has_dsp) {
+		err |= __get_user(treg, &sc->sc_hi1); mthi1(treg);
+		err |= __get_user(treg, &sc->sc_lo1); mtlo1(treg);
+		err |= __get_user(treg, &sc->sc_hi2); mthi2(treg);
+		err |= __get_user(treg, &sc->sc_lo2); mtlo2(treg);
+		err |= __get_user(treg, &sc->sc_hi3); mthi3(treg);
+		err |= __get_user(treg, &sc->sc_lo3); mtlo3(treg);
+		err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK);
+	}
 
 #define restore_gp_reg(i) do {						\
 	err |= __get_user(regs->regs[i], &sc->sc_regs[i]);		\
@@ -378,16 +394,30 @@ static int restore_sigcontext32(struct pt_regs *regs, struct sigcontext32 *sc)
 
 struct sigframe {
 	u32 sf_ass[4];			/* argument save space for o32 */
+#if ICACHE_REFILLS_WORKAROUND_WAR
+	u32 sf_pad[2];
+#else
 	u32 sf_code[2];			/* signal trampoline */
+#endif
 	struct sigcontext32 sf_sc;
 	sigset_t sf_mask;
+#if ICACHE_REFILLS_WORKAROUND_WAR
+	u32 sf_code[8] ____cacheline_aligned;	/* signal trampoline */
+#endif
 };
 
 struct rt_sigframe32 {
 	u32 rs_ass[4];			/* argument save space for o32 */
+#if ICACHE_REFILLS_WORKAROUND_WAR
+	u32 rs_pad[2];
+#else
 	u32 rs_code[2];			/* signal trampoline */
+#endif
 	compat_siginfo_t rs_info;
 	struct ucontext32 rs_uc;
+#if ICACHE_REFILLS_WORKAROUND_WAR
+	u32 rs_code[8] __attribute__((aligned(32)));	/* signal trampoline */
+#endif
 };
 
 int copy_siginfo_to_user32(compat_siginfo_t *to, siginfo_t *from)
@@ -411,6 +441,11 @@ int copy_siginfo_to_user32(compat_siginfo_t *to, siginfo_t *from)
 		err |= __copy_to_user(&to->_sifields._pad, &from->_sifields._pad, SI_PAD_SIZE);
 	else {
 		switch (from->si_code >> 16) {
+		case __SI_TIMER >> 16:
+			err |= __put_user(from->si_tid, &to->si_tid);
+			err |= __put_user(from->si_overrun, &to->si_overrun);
+			err |= __put_user(from->si_int, &to->si_int);
+			break;
 		case __SI_CHLD >> 16:
 			err |= __put_user(from->si_utime, &to->si_utime);
 			err |= __put_user(from->si_stime, &to->si_stime);
@@ -462,8 +497,6 @@ _sys32_sigreturn(nabi_no_regargs struct pt_regs regs)
 	/*
 	 * Don't let your children do this ...
 	 */
-	if (current_thread_info()->flags & TIF_SYSCALL_TRACE)
-		do_syscall_trace(&regs, 1);
 	__asm__ __volatile__(
 		"move\t$29, %0\n\t"
 		"j\tsyscall_exit"
@@ -480,6 +513,7 @@ __attribute_used__ noinline static void
 _sys32_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
 {
 	struct rt_sigframe32 *frame;
+	mm_segment_t old_fs;
 	sigset_t set;
 	stack_t st;
 	s32 sp;
@@ -510,7 +544,10 @@ _sys32_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
 
 	/* It is more difficult to avoid calling this function than to
 	   call it and ignore errors.  */
+	old_fs = get_fs();
+	set_fs (KERNEL_DS);
 	do_sigaltstack(&st, NULL, regs.regs[29]);
+	set_fs (old_fs);
 
 	/*
 	 * Don't let your children do this ...
@@ -550,8 +587,15 @@ static inline int setup_sigcontext32(struct pt_regs *regs,
 
 	err |= __put_user(regs->hi, &sc->sc_mdhi);
 	err |= __put_user(regs->lo, &sc->sc_mdlo);
-	err |= __put_user(regs->cp0_cause, &sc->sc_cause);
-	err |= __put_user(regs->cp0_badvaddr, &sc->sc_badvaddr);
+	if (cpu_has_dsp) {
+		err |= __put_user(rddsp(DSP_MASK), &sc->sc_hi1);
+		err |= __put_user(mfhi1(), &sc->sc_hi1);
+		err |= __put_user(mflo1(), &sc->sc_lo1);
+		err |= __put_user(mfhi2(), &sc->sc_hi2);
+		err |= __put_user(mflo2(), &sc->sc_lo2);
+		err |= __put_user(mfhi3(), &sc->sc_hi3);
+		err |= __put_user(mflo3(), &sc->sc_lo3);
+	}
 
 	err |= __put_user(!!used_math(), &sc->sc_used_math);
 
@@ -601,8 +645,8 @@ static inline void *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
 	return (void *)((sp - frame_size) & ALMASK);
 }
 
-static inline void setup_frame(struct k_sigaction * ka, struct pt_regs *regs,
-			       int signr, sigset_t *set)
+int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs,
+	int signr, sigset_t *set)
 {
 	struct sigframe *frame;
 	int err = 0;
@@ -648,15 +692,15 @@ static inline void setup_frame(struct k_sigaction * ka, struct pt_regs *regs,
 	       current->comm, current->pid,
 	       frame, regs->cp0_epc, frame->sf_code);
 #endif
-        return;
+	return 1;
 
 give_sigsegv:
 	force_sigsegv(signr, current);
+	return 0;
 }
 
-static inline void setup_rt_frame(struct k_sigaction * ka,
-				  struct pt_regs *regs, int signr,
-				  sigset_t *set, siginfo_t *info)
+int setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs,
+	int signr, sigset_t *set, siginfo_t *info)
 {
 	struct rt_sigframe32 *frame;
 	int err = 0;
@@ -719,15 +763,18 @@ static inline void setup_rt_frame(struct k_sigaction * ka,
 	       current->comm, current->pid,
 	       frame, regs->cp0_epc, frame->rs_code);
 #endif
-	return;
+	return 1;
 
 give_sigsegv:
 	force_sigsegv(signr, current);
+	return 0;
 }
 
-static inline void handle_signal(unsigned long sig, siginfo_t *info,
+static inline int handle_signal(unsigned long sig, siginfo_t *info,
 	struct k_sigaction *ka, sigset_t *oldset, struct pt_regs * regs)
 {
+	int ret;
+
 	switch (regs->regs[0]) {
 	case ERESTART_RESTARTBLOCK:
 	case ERESTARTNOHAND:
@@ -747,9 +794,9 @@ static inline void handle_signal(unsigned long sig, siginfo_t *info,
 	regs->regs[0] = 0;		/* Don't deal with this again.  */
 
 	if (ka->sa.sa_flags & SA_SIGINFO)
-		setup_rt_frame(ka, regs, sig, oldset, info);
+		ret = current->thread.abi->setup_rt_frame(ka, regs, sig, oldset, info);
 	else
-		setup_frame(ka, regs, sig, oldset);
+		ret = current->thread.abi->setup_frame(ka, regs, sig, oldset);
 
 	spin_lock_irq(&current->sighand->siglock);
 	sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
@@ -757,6 +804,8 @@ static inline void handle_signal(unsigned long sig, siginfo_t *info,
 		sigaddset(&current->blocked,sig);
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
+
+	return ret;
 }
 
 int do_signal32(sigset_t *oldset, struct pt_regs *regs)
@@ -780,10 +829,8 @@ int do_signal32(sigset_t *oldset, struct pt_regs *regs)
 		oldset = &current->blocked;
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
-	if (signr > 0) {
-		handle_signal(signr, &info, &ka, oldset, regs);
-		return 1;
-	}
+	if (signr > 0)
+		return handle_signal(signr, &info, &ka, oldset, regs);
 
 no_signal:
 	/*
@@ -819,12 +866,13 @@ asmlinkage int sys32_rt_sigaction(int sig, const struct sigaction32 *act,
 		goto out;
 
 	if (act) {
+		s32 handler;
 		int err = 0;
 
 		if (!access_ok(VERIFY_READ, act, sizeof(*act)))
 			return -EFAULT;
-		err |= __get_user((u32)(u64)new_sa.sa.sa_handler,
-		                  &act->sa_handler);
+		err |= __get_user(handler, &act->sa_handler);
+		new_sa.sa.sa_handler = (void*)(s64)handler;
 		err |= __get_user(new_sa.sa.sa_flags, &act->sa_flags);
 		err |= get_sigset(&new_sa.sa.sa_mask, &act->sa_mask);
 		if (err)
@@ -902,3 +950,30 @@ asmlinkage int sys32_rt_sigqueueinfo(int pid, int sig, compat_siginfo_t *uinfo)
 	set_fs (old_fs);
 	return ret;
 }
+
+asmlinkage long
+sys32_waitid(int which, compat_pid_t pid,
+	     compat_siginfo_t __user *uinfo, int options,
+	     struct compat_rusage __user *uru)
+{
+	siginfo_t info;
+	struct rusage ru;
+	long ret;
+	mm_segment_t old_fs = get_fs();
+
+	info.si_signo = 0;
+	set_fs (KERNEL_DS);
+	ret = sys_waitid(which, pid, (siginfo_t __user *) &info, options,
+			 uru ? (struct rusage __user *) &ru : NULL);
+	set_fs (old_fs);
+
+	if (ret < 0 || info.si_signo == 0)
+		return ret;
+
+	if (uru && (ret = put_compat_rusage(&ru, uru)))
+		return ret;
+
+	BUG_ON(info.si_code & __SI_MASK);
+	info.si_code |= __SI_CHLD;
+	return copy_siginfo_to_user32(uinfo, &info);
+}
diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c
index 3544208d4b4b..ec61b2670ba6 100644
--- a/arch/mips/kernel/signal_n32.c
+++ b/arch/mips/kernel/signal_n32.c
@@ -15,6 +15,8 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  */
+#include <linux/cache.h>
+#include <linux/sched.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
@@ -36,6 +38,7 @@
 #include <asm/system.h>
 #include <asm/fpu.h>
 #include <asm/cpu-features.h>
+#include <asm/war.h>
 
 #include "signal-common.h"
 
@@ -62,17 +65,18 @@ struct ucontextn32 {
 	sigset_t            uc_sigmask;   /* mask last for extensibility */
 };
 
-#if PLAT_TRAMPOLINE_STUFF_LINE
-#define __tramp __attribute__((aligned(PLAT_TRAMPOLINE_STUFF_LINE)))
-#else
-#define __tramp
-#endif
-
 struct rt_sigframe_n32 {
 	u32 rs_ass[4];			/* argument save space for o32 */
-	u32 rs_code[2] __tramp;		/* signal trampoline */
-	struct siginfo rs_info __tramp;
+#if ICACHE_REFILLS_WORKAROUND_WAR
+	u32 rs_pad[2];
+#else
+	u32 rs_code[2];			/* signal trampoline */
+#endif
+	struct siginfo rs_info;
 	struct ucontextn32 rs_uc;
+#if ICACHE_REFILLS_WORKAROUND_WAR
+	u32 rs_code[8] ____cacheline_aligned;		/* signal trampoline */
+#endif
 };
 
 save_static_function(sysn32_rt_sigreturn);
@@ -126,7 +130,7 @@ badframe:
 	force_sig(SIGSEGV, current);
 }
 
-void setup_rt_frame_n32(struct k_sigaction * ka,
+int setup_rt_frame_n32(struct k_sigaction * ka,
 	struct pt_regs *regs, int signr, sigset_t *set, siginfo_t *info)
 {
 	struct rt_sigframe_n32 *frame;
@@ -137,17 +141,7 @@ void setup_rt_frame_n32(struct k_sigaction * ka,
 	if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame)))
 		goto give_sigsegv;
 
-	/*
-	 * Set up the return code ...
-	 *
-	 *         li      v0, __NR_rt_sigreturn
-	 *         syscall
-	 */
-	if (PLAT_TRAMPOLINE_STUFF_LINE)
-		__clear_user(frame->rs_code, PLAT_TRAMPOLINE_STUFF_LINE);
-	err |= __put_user(0x24020000 + __NR_N32_rt_sigreturn, frame->rs_code + 0);
-	err |= __put_user(0x0000000c                        , frame->rs_code + 1);
-	flush_cache_sigtramp((unsigned long) frame->rs_code);
+	install_sigtramp(frame->rs_code, __NR_N32_rt_sigreturn);
 
 	/* Create siginfo.  */
 	err |= copy_siginfo_to_user(&frame->rs_info, info);
@@ -190,8 +184,9 @@ void setup_rt_frame_n32(struct k_sigaction * ka,
 	       current->comm, current->pid,
 	       frame, regs->cp0_epc, regs->regs[31]);
 #endif
-	return;
+	return 1;
 
 give_sigsegv:
 	force_sigsegv(signr, current);
+	return 0;
 }
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index af5cd3b8a396..25472fcaf715 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -50,7 +50,6 @@ static void smp_tune_scheduling (void)
 {
 	struct cache_desc *cd = &current_cpu_data.scache;
 	unsigned long cachesize;       /* kB   */
-	unsigned long bandwidth = 350; /* MB/s */
 	unsigned long cpu_khz;
 
 	/*
@@ -83,7 +82,7 @@ extern ATTRIB_NORET void cpu_idle(void);
  */
 asmlinkage void start_secondary(void)
 {
-	unsigned int cpu = smp_processor_id();
+	unsigned int cpu;
 
 	cpu_probe();
 	cpu_report();
@@ -96,6 +95,8 @@ asmlinkage void start_secondary(void)
 	 */
 
 	calibrate_delay();
+	preempt_disable();
+	cpu = smp_processor_id();
 	cpu_data[cpu].udelay_val = loops_per_jiffy;
 
 	prom_smp_finish();
@@ -121,7 +122,19 @@ struct call_data_struct *call_data;
  * or are or have executed.
  *
  * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
+ * hardware interrupt handler or from a bottom half handler:
+ *
+ * CPU A                               CPU B
+ * Disable interrupts
+ *                                     smp_call_function()
+ *                                     Take call_lock
+ *                                     Send IPIs
+ *                                     Wait for all cpus to acknowledge IPI
+ *                                     CPU A has not responded, spin waiting
+ *                                     for cpu A to respond, holding call_lock
+ * smp_call_function()
+ * Spin waiting for call_lock
+ * Deadlock                            Deadlock
  */
 int smp_call_function (void (*func) (void *info), void *info, int retry,
 								int wait)
@@ -130,6 +143,11 @@ int smp_call_function (void (*func) (void *info), void *info, int retry,
 	int i, cpus = num_online_cpus() - 1;
 	int cpu = smp_processor_id();
 
+	/*
+	 * Can die spectacularly if this CPU isn't yet marked online
+	 */
+	BUG_ON(!cpu_online(cpu));
+
 	if (!cpus)
 		return 0;
 
@@ -214,7 +232,6 @@ void __init smp_cpus_done(unsigned int max_cpus)
 /* called from main before smp_init() */
 void __init smp_prepare_cpus(unsigned int max_cpus)
 {
-	cpu_data[0].udelay_val = loops_per_jiffy;
 	init_new_context(current, &init_mm);
 	current_thread_info()->cpu = 0;
 	smp_tune_scheduling();
@@ -236,23 +253,28 @@ void __devinit smp_prepare_boot_cpu(void)
 }
 
 /*
- * Startup the CPU with this logical number
+ * Called once for each "cpu_possible(cpu)".  Needs to spin up the cpu
+ * and keep control until "cpu_online(cpu)" is set.  Note: cpu is
+ * physical, not logical.
  */
-static int __init do_boot_cpu(int cpu)
+int __devinit __cpu_up(unsigned int cpu)
 {
 	struct task_struct *idle;
 
 	/*
+	 * Processor goes to start_secondary(), sets online flag
 	 * The following code is purely to make sure
 	 * Linux can schedule processes on this slave.
 	 */
 	idle = fork_idle(cpu);
 	if (IS_ERR(idle))
-		panic("failed fork for CPU %d\n", cpu);
+		panic(KERN_ERR "Fork failed for CPU %d", cpu);
 
 	prom_boot_secondary(cpu, idle);
 
-	/* XXXKW timeout */
+	/*
+	 * Trust is futile.  We should really have timeouts ...
+	 */
 	while (!cpu_isset(cpu, cpu_callin_map))
 		udelay(100);
 
@@ -261,23 +283,6 @@ static int __init do_boot_cpu(int cpu)
 	return 0;
 }
 
-/*
- * Called once for each "cpu_possible(cpu)".  Needs to spin up the cpu
- * and keep control until "cpu_online(cpu)" is set.  Note: cpu is
- * physical, not logical.
- */
-int __devinit __cpu_up(unsigned int cpu)
-{
-	int ret;
-
-	/* Processor goes to start_secondary(), sets online flag */
-	ret = do_boot_cpu(cpu);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
 /* Not really SMP stuff ... */
 int setup_profiling_timer(unsigned int multiplier)
 {
diff --git a/arch/mips/kernel/smp_mt.c b/arch/mips/kernel/smp_mt.c
new file mode 100644
index 000000000000..d429544ba4bc
--- /dev/null
+++ b/arch/mips/kernel/smp_mt.c
@@ -0,0 +1,366 @@
+/*
+ * Copyright (C) 2004, 2005 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  Elizabeth Clarke (beth@mips.com)
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+#include <linux/compiler.h>
+
+#include <asm/atomic.h>
+#include <asm/cpu.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/hardirq.h>
+#include <asm/mmu_context.h>
+#include <asm/smp.h>
+#include <asm/time.h>
+#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
+#include <asm/cacheflush.h>
+#include <asm/mips-boards/maltaint.h>
+
+#define MIPS_CPU_IPI_RESCHED_IRQ 0
+#define MIPS_CPU_IPI_CALL_IRQ 1
+
+static int cpu_ipi_resched_irq, cpu_ipi_call_irq;
+
+#if 0
+static void dump_mtregisters(int vpe, int tc)
+{
+	printk("vpe %d tc %d\n", vpe, tc);
+
+	settc(tc);
+
+	printk("  c0 status  0x%lx\n", read_vpe_c0_status());
+	printk("  vpecontrol 0x%lx\n", read_vpe_c0_vpecontrol());
+	printk("  vpeconf0    0x%lx\n", read_vpe_c0_vpeconf0());
+	printk("  tcstatus 0x%lx\n", read_tc_c0_tcstatus());
+	printk("  tcrestart 0x%lx\n", read_tc_c0_tcrestart());
+	printk("  tcbind 0x%lx\n", read_tc_c0_tcbind());
+	printk("  tchalt 0x%lx\n", read_tc_c0_tchalt());
+}
+#endif
+
+void __init sanitize_tlb_entries(void)
+{
+	int i, tlbsiz;
+	unsigned long mvpconf0, ncpu;
+
+	if (!cpu_has_mipsmt)
+		return;
+
+	set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+	/* Disable TLB sharing */
+	clear_c0_mvpcontrol(MVPCONTROL_STLB);
+
+	mvpconf0 = read_c0_mvpconf0();
+
+	printk(KERN_INFO "MVPConf0 0x%lx TLBS %lx PTLBE %ld\n", mvpconf0,
+		   (mvpconf0 & MVPCONF0_TLBS) >> MVPCONF0_TLBS_SHIFT,
+			   (mvpconf0 & MVPCONF0_PTLBE) >> MVPCONF0_PTLBE_SHIFT);
+
+	tlbsiz = (mvpconf0 & MVPCONF0_PTLBE) >> MVPCONF0_PTLBE_SHIFT;
+	ncpu = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
+
+	printk(" tlbsiz %d ncpu %ld\n", tlbsiz, ncpu);
+
+	if (tlbsiz > 0) {
+		/* share them out across the vpe's */
+		tlbsiz /= ncpu;
+
+		printk(KERN_INFO "setting Config1.MMU_size to %d\n", tlbsiz);
+
+		for (i = 0; i < ncpu; i++) {
+			settc(i);
+
+			if (i == 0)
+				write_c0_config1((read_c0_config1() & ~(0x3f << 25)) | (tlbsiz << 25));
+			else
+				write_vpe_c0_config1((read_vpe_c0_config1() & ~(0x3f << 25)) |
+						   (tlbsiz << 25));
+		}
+	}
+
+	clear_c0_mvpcontrol(MVPCONTROL_VPC);
+}
+
+#if 0
+/*
+ * Use c0_MVPConf0 to find out how many CPUs are available, setting up
+ * phys_cpu_present_map and the logical/physical mappings.
+ */
+void __init prom_build_cpu_map(void)
+{
+	int i, num, ncpus;
+
+	cpus_clear(phys_cpu_present_map);
+
+	/* assume we boot on cpu 0.... */
+	cpu_set(0, phys_cpu_present_map);
+	__cpu_number_map[0] = 0;
+	__cpu_logical_map[0] = 0;
+
+	if (cpu_has_mipsmt) {
+		ncpus = ((read_c0_mvpconf0() & (MVPCONF0_PVPE)) >> MVPCONF0_PVPE_SHIFT) + 1;
+		for (i=1, num=0; i< NR_CPUS && i<ncpus; i++) {
+			cpu_set(i, phys_cpu_present_map);
+			__cpu_number_map[i] = ++num;
+			__cpu_logical_map[num] = i;
+		}
+
+		printk(KERN_INFO "%i available secondary CPU(s)\n", num);
+	}
+}
+#endif
+
+static void ipi_resched_dispatch (struct pt_regs *regs)
+{
+	do_IRQ(MIPS_CPU_IPI_RESCHED_IRQ, regs);
+}
+
+static void ipi_call_dispatch (struct pt_regs *regs)
+{
+	do_IRQ(MIPS_CPU_IPI_CALL_IRQ, regs);
+}
+
+irqreturn_t ipi_resched_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	return IRQ_HANDLED;
+}
+
+irqreturn_t ipi_call_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	smp_call_function_interrupt();
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction irq_resched = {
+	.handler	= ipi_resched_interrupt,
+	.flags		= SA_INTERRUPT,
+	.name		= "IPI_resched"
+};
+
+static struct irqaction irq_call = {
+	.handler	= ipi_call_interrupt,
+	.flags		= SA_INTERRUPT,
+	.name		= "IPI_call"
+};
+
+/*
+ * Common setup before any secondaries are started
+ * Make sure all CPU's are in a sensible state before we boot any of the
+ * secondarys
+ */
+void prom_prepare_cpus(unsigned int max_cpus)
+{
+	unsigned long val;
+	int i, num;
+
+	if (!cpu_has_mipsmt)
+		return;
+
+	/* disable MT so we can configure */
+	dvpe();
+	dmt();
+
+	/* Put MVPE's into 'configuration state' */
+	set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+	val = read_c0_mvpconf0();
+
+	/* we'll always have more TC's than VPE's, so loop setting everything
+	   to a sensible state */
+	for (i = 0, num = 0; i <= ((val & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT); i++) {
+		settc(i);
+
+		/* VPE's */
+		if (i <= ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)) {
+
+			/* deactivate all but vpe0 */
+			if (i != 0) {
+				unsigned long tmp = read_vpe_c0_vpeconf0();
+
+				tmp &= ~VPECONF0_VPA;
+
+				/* master VPE */
+				tmp |= VPECONF0_MVP;
+				write_vpe_c0_vpeconf0(tmp);
+
+				/* Record this as available CPU */
+				if (i < max_cpus) {
+					cpu_set(i, phys_cpu_present_map);
+					__cpu_number_map[i]	= ++num;
+					__cpu_logical_map[num]	= i;
+				}
+			}
+
+			/* disable multi-threading with TC's */
+			write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE);
+
+			if (i != 0) {
+				write_vpe_c0_status((read_c0_status() & ~(ST0_IM | ST0_IE | ST0_KSU)) | ST0_CU0);
+				write_vpe_c0_cause(read_vpe_c0_cause() & ~CAUSEF_IP);
+
+				/* set config to be the same as vpe0, particularly kseg0 coherency alg */
+				write_vpe_c0_config( read_c0_config());
+			}
+
+		}
+
+		/* TC's */
+
+		if (i != 0) {
+			unsigned long tmp;
+
+			/* bind a TC to each VPE, May as well put all excess TC's
+			   on the last VPE */
+			if ( i >= (((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)+1) )
+				write_tc_c0_tcbind(read_tc_c0_tcbind() | ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) );
+			else {
+				write_tc_c0_tcbind( read_tc_c0_tcbind() | i);
+
+				/* and set XTC */
+				write_vpe_c0_vpeconf0( read_vpe_c0_vpeconf0() | (i << VPECONF0_XTC_SHIFT));
+			}
+
+			tmp = read_tc_c0_tcstatus();
+
+			/* mark not allocated and not dynamically allocatable */
+			tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
+			tmp |= TCSTATUS_IXMT;		/* interrupt exempt */
+			write_tc_c0_tcstatus(tmp);
+
+			write_tc_c0_tchalt(TCHALT_H);
+		}
+	}
+
+	/* Release config state */
+	clear_c0_mvpcontrol(MVPCONTROL_VPC);
+
+	/* We'll wait until starting the secondaries before starting MVPE */
+
+	printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num);
+
+	/* set up ipi interrupts */
+	if (cpu_has_vint) {
+		set_vi_handler (MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch);
+		set_vi_handler (MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch);
+	}
+
+	cpu_ipi_resched_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_RESCHED_IRQ;
+	cpu_ipi_call_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_CALL_IRQ;
+
+	setup_irq(cpu_ipi_resched_irq, &irq_resched);
+	setup_irq(cpu_ipi_call_irq, &irq_call);
+
+	/* need to mark IPI's as IRQ_PER_CPU */
+	irq_desc[cpu_ipi_resched_irq].status |= IRQ_PER_CPU;
+	irq_desc[cpu_ipi_call_irq].status |= IRQ_PER_CPU;
+}
+
+/*
+ * Setup the PC, SP, and GP of a secondary processor and start it
+ * running!
+ * smp_bootstrap is the place to resume from
+ * __KSTK_TOS(idle) is apparently the stack pointer
+ * (unsigned long)idle->thread_info the gp
+ * assumes a 1:1 mapping of TC => VPE
+ */
+void prom_boot_secondary(int cpu, struct task_struct *idle)
+{
+	dvpe();
+	set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+	settc(cpu);
+
+	/* restart */
+	write_tc_c0_tcrestart((unsigned long)&smp_bootstrap);
+
+	/* enable the tc this vpe/cpu will be running */
+	write_tc_c0_tcstatus((read_tc_c0_tcstatus() & ~TCSTATUS_IXMT) | TCSTATUS_A);
+
+	write_tc_c0_tchalt(0);
+
+	/* enable the VPE */
+	write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA);
+
+	/* stack pointer */
+	write_tc_gpr_sp( __KSTK_TOS(idle));
+
+	/* global pointer */
+	write_tc_gpr_gp((unsigned long)idle->thread_info);
+
+	flush_icache_range((unsigned long)idle->thread_info,
+					   (unsigned long)idle->thread_info +
+					   sizeof(struct thread_info));
+
+	/* finally out of configuration and into chaos */
+	clear_c0_mvpcontrol(MVPCONTROL_VPC);
+
+	evpe(EVPE_ENABLE);
+}
+
+void prom_init_secondary(void)
+{
+	write_c0_status((read_c0_status() & ~ST0_IM ) |
+	                (STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP7));
+}
+
+void prom_smp_finish(void)
+{
+	write_c0_compare(read_c0_count() + (8* mips_hpt_frequency/HZ));
+
+	local_irq_enable();
+}
+
+void prom_cpus_done(void)
+{
+}
+
+void core_send_ipi(int cpu, unsigned int action)
+{
+	int i;
+	unsigned long flags;
+	int vpflags;
+
+	local_irq_save (flags);
+
+	vpflags = dvpe();	/* cant access the other CPU's registers whilst MVPE enabled */
+
+	switch (action) {
+	case SMP_CALL_FUNCTION:
+		i = C_SW1;
+		break;
+
+	case SMP_RESCHEDULE_YOURSELF:
+	default:
+		i = C_SW0;
+		break;
+	}
+
+	/* 1:1 mapping of vpe and tc... */
+	settc(cpu);
+	write_vpe_c0_cause(read_vpe_c0_cause() | i);
+	evpe(vpflags);
+
+	local_irq_restore(flags);
+}
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index 21e3e13a4b44..ee98eeb65e85 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -7,6 +7,7 @@
  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
  * Copyright (C) 2001 MIPS Technologies, Inc.
  */
+#include <linux/config.h>
 #include <linux/a.out.h>
 #include <linux/errno.h>
 #include <linux/linkage.h>
@@ -26,6 +27,7 @@
 #include <linux/msg.h>
 #include <linux/shm.h>
 #include <linux/compiler.h>
+#include <linux/module.h>
 
 #include <asm/branch.h>
 #include <asm/cachectl.h>
@@ -56,6 +58,8 @@ out:
 
 unsigned long shm_align_mask = PAGE_SIZE - 1;	/* Sane caches */
 
+EXPORT_SYMBOL(shm_align_mask);
+
 #define COLOUR_ALIGN(addr,pgoff)				\
 	((((addr) + shm_align_mask) & ~shm_align_mask) +	\
 	 (((pgoff) << PAGE_SHIFT) & shm_align_mask))
@@ -173,14 +177,28 @@ _sys_clone(nabi_no_regargs struct pt_regs regs)
 {
 	unsigned long clone_flags;
 	unsigned long newsp;
-	int *parent_tidptr, *child_tidptr;
+	int __user *parent_tidptr, *child_tidptr;
 
 	clone_flags = regs.regs[4];
 	newsp = regs.regs[5];
 	if (!newsp)
 		newsp = regs.regs[29];
-	parent_tidptr = (int *) regs.regs[6];
-	child_tidptr = (int *) regs.regs[7];
+	parent_tidptr = (int __user *) regs.regs[6];
+#ifdef CONFIG_32BIT
+	/* We need to fetch the fifth argument off the stack.  */
+	child_tidptr = NULL;
+	if (clone_flags & (CLONE_CHILD_SETTID | CLONE_CHILD_CLEARTID)) {
+		int __user *__user *usp = (int __user *__user *) regs.regs[29];
+		if (regs.regs[2] == __NR_syscall) {
+			if (get_user (child_tidptr, &usp[5]))
+				return -EFAULT;
+		}
+		else if (get_user (child_tidptr, &usp[4]))
+			return -EFAULT;
+	}
+#else
+	child_tidptr = (int __user *) regs.regs[8];
+#endif
 	return do_fork(clone_flags, newsp, &regs, 0,
 	               parent_tidptr, child_tidptr);
 }
@@ -242,6 +260,16 @@ asmlinkage int sys_olduname(struct oldold_utsname * name)
 	return error;
 }
 
+void sys_set_thread_area(unsigned long addr)
+{
+	struct thread_info *ti = current->thread_info;
+
+	ti->tp_value = addr;
+
+	/* If some future MIPS implementation has this register in hardware,
+	 * we will need to update it here (and in context switches).  */
+}
+
 asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3)
 {
 	int	tmp, len;
diff --git a/arch/mips/kernel/sysirix.c b/arch/mips/kernel/sysirix.c
index 7ae4af476974..52924f8ce23c 100644
--- a/arch/mips/kernel/sysirix.c
+++ b/arch/mips/kernel/sysirix.c
@@ -73,32 +73,30 @@ asmlinkage int irix_sysmp(struct pt_regs *regs)
 }
 
 /* The prctl commands. */
-#define PR_MAXPROCS          1 /* Tasks/user. */
-#define PR_ISBLOCKED         2 /* If blocked, return 1. */
-#define PR_SETSTACKSIZE      3 /* Set largest task stack size. */
-#define PR_GETSTACKSIZE      4 /* Get largest task stack size. */
-#define PR_MAXPPROCS         5 /* Num parallel tasks. */
-#define PR_UNBLKONEXEC       6 /* When task exec/exit's, unblock. */
-#define PR_SETEXITSIG        8 /* When task exit's, set signal. */
-#define PR_RESIDENT          9 /* Make task unswappable. */
-#define PR_ATTACHADDR       10 /* (Re-)Connect a vma to a task. */
-#define PR_DETACHADDR       11 /* Disconnect a vma from a task. */
-#define PR_TERMCHILD        12 /* When parent sleeps with fishes, kill child. */
-#define PR_GETSHMASK        13 /* Get the sproc() share mask. */
-#define PR_GETNSHARE        14 /* Number of share group members. */
-#define PR_COREPID          15 /* Add task pid to name when it core. */
-#define	PR_ATTACHADDRPERM   16 /* (Re-)Connect vma, with specified prot. */
-#define PR_PTHREADEXIT      17 /* Kill a pthread without prejudice. */
-
-asmlinkage int irix_prctl(struct pt_regs *regs)
-{
-	unsigned long cmd;
-	int error = 0, base = 0;
+#define PR_MAXPROCS		 1 /* Tasks/user. */
+#define PR_ISBLOCKED		 2 /* If blocked, return 1. */
+#define PR_SETSTACKSIZE		 3 /* Set largest task stack size. */
+#define PR_GETSTACKSIZE		 4 /* Get largest task stack size. */
+#define PR_MAXPPROCS		 5 /* Num parallel tasks. */
+#define PR_UNBLKONEXEC		 6 /* When task exec/exit's, unblock. */
+#define PR_SETEXITSIG		 8 /* When task exit's, set signal. */
+#define PR_RESIDENT		 9 /* Make task unswappable. */
+#define PR_ATTACHADDR		10 /* (Re-)Connect a vma to a task. */
+#define PR_DETACHADDR		11 /* Disconnect a vma from a task. */
+#define PR_TERMCHILD		12 /* Kill child if the parent dies. */
+#define PR_GETSHMASK		13 /* Get the sproc() share mask. */
+#define PR_GETNSHARE		14 /* Number of share group members. */
+#define PR_COREPID		15 /* Add task pid to name when it core. */
+#define PR_ATTACHADDRPERM	16 /* (Re-)Connect vma, with specified prot. */
+#define PR_PTHREADEXIT		17 /* Kill a pthread, only for IRIX 6.[234] */
+
+asmlinkage int irix_prctl(unsigned option, ...)
+{
+	va_list args;
+	int error = 0;
 
-	if (regs->regs[2] == 1000)
-		base = 1;
-	cmd = regs->regs[base + 4];
-	switch (cmd) {
+	va_start(args, option);
+	switch (option) {
 	case PR_MAXPROCS:
 		printk("irix_prctl[%s:%d]: Wants PR_MAXPROCS\n",
 		       current->comm, current->pid);
@@ -111,7 +109,7 @@ asmlinkage int irix_prctl(struct pt_regs *regs)
 		printk("irix_prctl[%s:%d]: Wants PR_ISBLOCKED\n",
 		       current->comm, current->pid);
 		read_lock(&tasklist_lock);
-		task = find_task_by_pid(regs->regs[base + 5]);
+		task = find_task_by_pid(va_arg(args, pid_t));
 		error = -ESRCH;
 		if (error)
 			error = (task->run_list.next != NULL);
@@ -121,7 +119,7 @@ asmlinkage int irix_prctl(struct pt_regs *regs)
 	}
 
 	case PR_SETSTACKSIZE: {
-		long value = regs->regs[base + 5];
+		long value = va_arg(args, long);
 
 		printk("irix_prctl[%s:%d]: Wants PR_SETSTACKSIZE<%08lx>\n",
 		       current->comm, current->pid, (unsigned long) value);
@@ -222,24 +220,20 @@ asmlinkage int irix_prctl(struct pt_regs *regs)
 		error = -EINVAL;
 		break;
 
-	case PR_PTHREADEXIT:
-		printk("irix_prctl[%s:%d]: Wants PR_PTHREADEXIT\n",
-		       current->comm, current->pid);
-		do_exit(regs->regs[base + 5]);
-
 	default:
 		printk("irix_prctl[%s:%d]: Non-existant opcode %d\n",
-		       current->comm, current->pid, (int)cmd);
+		       current->comm, current->pid, option);
 		error = -EINVAL;
 		break;
 	}
+	va_end(args);
 
 	return error;
 }
 
 #undef DEBUG_PROCGRPS
 
-extern unsigned long irix_mapelf(int fd, struct elf_phdr *user_phdrp, int cnt);
+extern unsigned long irix_mapelf(int fd, struct elf_phdr __user *user_phdrp, int cnt);
 extern int getrusage(struct task_struct *p, int who, struct rusage __user *ru);
 extern char *prom_getenv(char *name);
 extern long prom_setenv(char *name, char *value);
@@ -276,23 +270,19 @@ asmlinkage int irix_syssgi(struct pt_regs *regs)
 	cmd = regs->regs[base + 4];
 	switch(cmd) {
 	case SGI_SYSID: {
-		char *buf = (char *) regs->regs[base + 5];
+		char __user *buf = (char __user *) regs->regs[base + 5];
 
 		/* XXX Use ethernet addr.... */
-		retval = clear_user(buf, 64);
+		retval = clear_user(buf, 64) ? -EFAULT : 0;
 		break;
 	}
 #if 0
 	case SGI_RDNAME: {
 		int pid = (int) regs->regs[base + 5];
-		char *buf = (char *) regs->regs[base + 6];
+		char __user *buf = (char __user *) regs->regs[base + 6];
 		struct task_struct *p;
 		char tcomm[sizeof(current->comm)];
 
-		if (!access_ok(VERIFY_WRITE, buf, sizeof(tcomm))) {
-			retval = -EFAULT;
-			break;
-		}
 		read_lock(&tasklist_lock);
 		p = find_task_by_pid(pid);
 		if (!p) {
@@ -304,34 +294,28 @@ asmlinkage int irix_syssgi(struct pt_regs *regs)
 		read_unlock(&tasklist_lock);
 
 		/* XXX Need to check sizes. */
-		copy_to_user(buf, tcomm, sizeof(tcomm));
-		retval = 0;
+		retval = copy_to_user(buf, tcomm, sizeof(tcomm)) ? -EFAULT : 0;
 		break;
 	}
 
 	case SGI_GETNVRAM: {
-		char *name = (char *) regs->regs[base+5];
-		char *buf = (char *) regs->regs[base+6];
+		char __user *name = (char __user *) regs->regs[base+5];
+		char __user *buf = (char __user *) regs->regs[base+6];
 		char *value;
 		return -EINVAL;	/* til I fix it */
-		if (!access_ok(VERIFY_WRITE, buf, 128)) {
-			retval = -EFAULT;
-			break;
-		}
 		value = prom_getenv(name);	/* PROM lock?  */
 		if (!value) {
 			retval = -EINVAL;
 			break;
 		}
 		/* Do I strlen() for the length? */
-		copy_to_user(buf, value, 128);
-		retval = 0;
+		retval = copy_to_user(buf, value, 128) ? -EFAULT : 0;
 		break;
 	}
 
 	case SGI_SETNVRAM: {
-		char *name = (char *) regs->regs[base+5];
-		char *value = (char *) regs->regs[base+6];
+		char __user *name = (char __user *) regs->regs[base+5];
+		char __user *value = (char __user *) regs->regs[base+6];
 		return -EINVAL;	/* til I fix it */
 		retval = prom_setenv(name, value);
 		/* XXX make sure retval conforms to syssgi(2) */
@@ -407,16 +391,16 @@ asmlinkage int irix_syssgi(struct pt_regs *regs)
 
 	case SGI_SETGROUPS:
 		retval = sys_setgroups((int) regs->regs[base + 5],
-		                       (gid_t *) regs->regs[base + 6]);
+		                       (gid_t __user *) regs->regs[base + 6]);
 		break;
 
 	case SGI_GETGROUPS:
 		retval = sys_getgroups((int) regs->regs[base + 5],
-		                       (gid_t *) regs->regs[base + 6]);
+		                       (gid_t __user *) regs->regs[base + 6]);
 		break;
 
 	case SGI_RUSAGE: {
-		struct rusage *ru = (struct rusage *) regs->regs[base + 6];
+		struct rusage __user *ru = (struct rusage __user *) regs->regs[base + 6];
 
 		switch((int) regs->regs[base + 5]) {
 		case 0:
@@ -453,7 +437,7 @@ asmlinkage int irix_syssgi(struct pt_regs *regs)
 
 	case SGI_ELFMAP:
 		retval = irix_mapelf((int) regs->regs[base + 5],
-				     (struct elf_phdr *) regs->regs[base + 6],
+				     (struct elf_phdr __user *) regs->regs[base + 6],
 				     (int) regs->regs[base + 7]);
 		break;
 
@@ -468,24 +452,24 @@ asmlinkage int irix_syssgi(struct pt_regs *regs)
 
 	case SGI_PHYSP: {
 		unsigned long addr = regs->regs[base + 5];
-		int *pageno = (int *) (regs->regs[base + 6]);
+		int __user *pageno = (int __user *) (regs->regs[base + 6]);
 		struct mm_struct *mm = current->mm;
 		pgd_t *pgdp;
+		pud_t *pudp;
 		pmd_t *pmdp;
 		pte_t *ptep;
 
-		if (!access_ok(VERIFY_WRITE, pageno, sizeof(int)))
-			return -EFAULT;
-
 		down_read(&mm->mmap_sem);
 		pgdp = pgd_offset(mm, addr);
-		pmdp = pmd_offset(pgdp, addr);
+		pudp = pud_offset(pgdp, addr);
+		pmdp = pmd_offset(pudp, addr);
 		ptep = pte_offset(pmdp, addr);
 		retval = -EINVAL;
 		if (ptep) {
 			pte_t pte = *ptep;
 
 			if (pte_val(pte) & (_PAGE_VALID | _PAGE_PRESENT)) {
+				/* b0rked on 64-bit */
 				retval =  put_user((pte_val(pte) & PAGE_MASK) >>
 				                   PAGE_SHIFT, pageno);
 			}
@@ -496,7 +480,7 @@ asmlinkage int irix_syssgi(struct pt_regs *regs)
 
 	case SGI_INVENT: {
 		int  arg1    = (int)    regs->regs [base + 5];
-		void *buffer = (void *) regs->regs [base + 6];
+		void __user *buffer = (void __user *) regs->regs [base + 6];
 		int  count   = (int)    regs->regs [base + 7];
 
 		switch (arg1) {
@@ -692,8 +676,8 @@ asmlinkage int irix_pause(void)
 }
 
 /* XXX need more than this... */
-asmlinkage int irix_mount(char *dev_name, char *dir_name, unsigned long flags,
-			  char *type, void *data, int datalen)
+asmlinkage int irix_mount(char __user *dev_name, char __user *dir_name,
+	unsigned long flags, char __user *type, void __user *data, int datalen)
 {
 	printk("[%s:%d] irix_mount(%p,%p,%08lx,%p,%p,%d)\n",
 	       current->comm, current->pid,
@@ -708,8 +692,8 @@ struct irix_statfs {
 	char  f_fname[6], f_fpack[6];
 };
 
-asmlinkage int irix_statfs(const char *path, struct irix_statfs *buf,
-			   int len, int fs_type)
+asmlinkage int irix_statfs(const char __user *path,
+	struct irix_statfs __user *buf, int len, int fs_type)
 {
 	struct nameidata nd;
 	struct kstatfs kbuf;
@@ -724,6 +708,7 @@ asmlinkage int irix_statfs(const char *path, struct irix_statfs *buf,
 		error = -EFAULT;
 		goto out;
 	}
+
 	error = user_path_walk(path, &nd);
 	if (error)
 		goto out;
@@ -732,18 +717,17 @@ asmlinkage int irix_statfs(const char *path, struct irix_statfs *buf,
 	if (error)
 		goto dput_and_out;
 
-	__put_user(kbuf.f_type, &buf->f_type);
-	__put_user(kbuf.f_bsize, &buf->f_bsize);
-	__put_user(kbuf.f_frsize, &buf->f_frsize);
-	__put_user(kbuf.f_blocks, &buf->f_blocks);
-	__put_user(kbuf.f_bfree, &buf->f_bfree);
-	__put_user(kbuf.f_files, &buf->f_files);
-	__put_user(kbuf.f_ffree, &buf->f_ffree);
+	error = __put_user(kbuf.f_type, &buf->f_type);
+	error |= __put_user(kbuf.f_bsize, &buf->f_bsize);
+	error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
+	error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
+	error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
+	error |= __put_user(kbuf.f_files, &buf->f_files);
+	error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
 	for (i = 0; i < 6; i++) {
-		__put_user(0, &buf->f_fname[i]);
-		__put_user(0, &buf->f_fpack[i]);
+		error |= __put_user(0, &buf->f_fname[i]);
+		error |= __put_user(0, &buf->f_fpack[i]);
 	}
-	error = 0;
 
 dput_and_out:
 	path_release(&nd);
@@ -751,7 +735,7 @@ out:
 	return error;
 }
 
-asmlinkage int irix_fstatfs(unsigned int fd, struct irix_statfs *buf)
+asmlinkage int irix_fstatfs(unsigned int fd, struct irix_statfs __user *buf)
 {
 	struct kstatfs kbuf;
 	struct file *file;
@@ -761,6 +745,7 @@ asmlinkage int irix_fstatfs(unsigned int fd, struct irix_statfs *buf)
 		error = -EFAULT;
 		goto out;
 	}
+
 	if (!(file = fget(fd))) {
 		error = -EBADF;
 		goto out;
@@ -770,16 +755,17 @@ asmlinkage int irix_fstatfs(unsigned int fd, struct irix_statfs *buf)
 	if (error)
 		goto out_f;
 
-	__put_user(kbuf.f_type, &buf->f_type);
-	__put_user(kbuf.f_bsize, &buf->f_bsize);
-	__put_user(kbuf.f_frsize, &buf->f_frsize);
-	__put_user(kbuf.f_blocks, &buf->f_blocks);
-	__put_user(kbuf.f_bfree, &buf->f_bfree);
-	__put_user(kbuf.f_files, &buf->f_files);
-	__put_user(kbuf.f_ffree, &buf->f_ffree);
-	for(i = 0; i < 6; i++) {
-		__put_user(0, &buf->f_fname[i]);
-		__put_user(0, &buf->f_fpack[i]);
+	error = __put_user(kbuf.f_type, &buf->f_type);
+	error |= __put_user(kbuf.f_bsize, &buf->f_bsize);
+	error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
+	error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
+	error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
+	error |= __put_user(kbuf.f_files, &buf->f_files);
+	error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
+
+	for (i = 0; i < 6; i++) {
+		error |= __put_user(0, &buf->f_fname[i]);
+		error |= __put_user(0, &buf->f_fpack[i]);
 	}
 
 out_f:
@@ -806,14 +792,15 @@ asmlinkage int irix_setpgrp(int flags)
 	return error;
 }
 
-asmlinkage int irix_times(struct tms * tbuf)
+asmlinkage int irix_times(struct tms __user *tbuf)
 {
 	int err = 0;
 
 	if (tbuf) {
 		if (!access_ok(VERIFY_WRITE,tbuf,sizeof *tbuf))
 			return -EFAULT;
-		err |= __put_user(current->utime, &tbuf->tms_utime);
+
+		err = __put_user(current->utime, &tbuf->tms_utime);
 		err |= __put_user(current->stime, &tbuf->tms_stime);
 		err |= __put_user(current->signal->cutime, &tbuf->tms_cutime);
 		err |= __put_user(current->signal->cstime, &tbuf->tms_cstime);
@@ -829,13 +816,13 @@ asmlinkage int irix_exec(struct pt_regs *regs)
 
 	if(regs->regs[2] == 1000)
 		base = 1;
-	filename = getname((char *) (long)regs->regs[base + 4]);
+	filename = getname((char __user *) (long)regs->regs[base + 4]);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
 		return error;
 
-	error = do_execve(filename, (char **) (long)regs->regs[base + 5],
-	                  (char **) 0, regs);
+	error = do_execve(filename, (char __user * __user *) (long)regs->regs[base + 5],
+	                  NULL, regs);
 	putname(filename);
 
 	return error;
@@ -848,12 +835,12 @@ asmlinkage int irix_exece(struct pt_regs *regs)
 
 	if (regs->regs[2] == 1000)
 		base = 1;
-	filename = getname((char *) (long)regs->regs[base + 4]);
+	filename = getname((char __user *) (long)regs->regs[base + 4]);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
 		return error;
-	error = do_execve(filename, (char **) (long)regs->regs[base + 5],
-	                  (char **) (long)regs->regs[base + 6], regs);
+	error = do_execve(filename, (char __user * __user *) (long)regs->regs[base + 5],
+	                  (char __user * __user *) (long)regs->regs[base + 6], regs);
 	putname(filename);
 
 	return error;
@@ -909,22 +896,17 @@ asmlinkage int irix_socket(int family, int type, int protocol)
 	return sys_socket(family, type, protocol);
 }
 
-asmlinkage int irix_getdomainname(char *name, int len)
+asmlinkage int irix_getdomainname(char __user *name, int len)
 {
-	int error;
-
-	if (!access_ok(VERIFY_WRITE, name, len))
-		return -EFAULT;
+	int err;
 
 	down_read(&uts_sem);
 	if (len > __NEW_UTS_LEN)
 		len = __NEW_UTS_LEN;
-	error = 0;
-	if (copy_to_user(name, system_utsname.domainname, len))
-		error = -EFAULT;
+	err = copy_to_user(name, system_utsname.domainname, len) ? -EFAULT : 0;
 	up_read(&uts_sem);
 
-	return error;
+	return err;
 }
 
 asmlinkage unsigned long irix_getpagesize(void)
@@ -940,12 +922,13 @@ asmlinkage int irix_msgsys(int opcode, unsigned long arg0, unsigned long arg1,
 	case 0:
 		return sys_msgget((key_t) arg0, (int) arg1);
 	case 1:
-		return sys_msgctl((int) arg0, (int) arg1, (struct msqid_ds *)arg2);
+		return sys_msgctl((int) arg0, (int) arg1,
+		                  (struct msqid_ds __user *)arg2);
 	case 2:
-		return sys_msgrcv((int) arg0, (struct msgbuf *) arg1,
+		return sys_msgrcv((int) arg0, (struct msgbuf __user *) arg1,
 				  (size_t) arg2, (long) arg3, (int) arg4);
 	case 3:
-		return sys_msgsnd((int) arg0, (struct msgbuf *) arg1,
+		return sys_msgsnd((int) arg0, (struct msgbuf __user *) arg1,
 				  (size_t) arg2, (int) arg3);
 	default:
 		return -EINVAL;
@@ -957,12 +940,13 @@ asmlinkage int irix_shmsys(int opcode, unsigned long arg0, unsigned long arg1,
 {
 	switch (opcode) {
 	case 0:
-		return do_shmat((int) arg0, (char *)arg1, (int) arg2,
+		return do_shmat((int) arg0, (char __user *) arg1, (int) arg2,
 				 (unsigned long *) arg3);
 	case 1:
-		return sys_shmctl((int)arg0, (int)arg1, (struct shmid_ds *)arg2);
+		return sys_shmctl((int)arg0, (int)arg1,
+		                  (struct shmid_ds __user *)arg2);
 	case 2:
-		return sys_shmdt((char *)arg0);
+		return sys_shmdt((char __user *)arg0);
 	case 3:
 		return sys_shmget((key_t) arg0, (int) arg1, (int) arg2);
 	default:
@@ -980,7 +964,7 @@ asmlinkage int irix_semsys(int opcode, unsigned long arg0, unsigned long arg1,
 	case 1:
 		return sys_semget((key_t) arg0, (int) arg1, (int) arg2);
 	case 2:
-		return sys_semop((int) arg0, (struct sembuf *)arg1,
+		return sys_semop((int) arg0, (struct sembuf __user *)arg1,
 				 (unsigned int) arg2);
 	default:
 		return -EINVAL;
@@ -998,15 +982,16 @@ static inline loff_t llseek(struct file *file, loff_t offset, int origin)
 	lock_kernel();
 	retval = fn(file, offset, origin);
 	unlock_kernel();
+
 	return retval;
 }
 
 asmlinkage int irix_lseek64(int fd, int _unused, int offhi, int offlow,
                             int origin)
 {
-	int retval;
 	struct file * file;
 	loff_t offset;
+	int retval;
 
 	retval = -EBADF;
 	file = fget(fd);
@@ -1031,12 +1016,12 @@ asmlinkage int irix_sginap(int ticks)
 	return 0;
 }
 
-asmlinkage int irix_sgikopt(char *istring, char *ostring, int len)
+asmlinkage int irix_sgikopt(char __user *istring, char __user *ostring, int len)
 {
 	return -EINVAL;
 }
 
-asmlinkage int irix_gettimeofday(struct timeval *tv)
+asmlinkage int irix_gettimeofday(struct timeval __user *tv)
 {
 	time_t sec;
 	long nsec, seq;
@@ -1077,7 +1062,7 @@ asmlinkage unsigned long irix_mmap32(unsigned long addr, size_t len, int prot,
 
 			if (max_size > file->f_dentry->d_inode->i_size) {
 				old_pos = sys_lseek (fd, max_size - 1, 0);
-				sys_write (fd, "", 1);
+				sys_write (fd, (void __user *) "", 1);
 				sys_lseek (fd, old_pos, 0);
 			}
 		}
@@ -1102,7 +1087,7 @@ asmlinkage int irix_madvise(unsigned long addr, int len, int behavior)
 	return -EINVAL;
 }
 
-asmlinkage int irix_pagelock(char *addr, int len, int op)
+asmlinkage int irix_pagelock(char __user *addr, int len, int op)
 {
 	printk("[%s:%d] Wheee.. irix_pagelock(%p,%d,%d)\n",
 	       current->comm, current->pid, addr, len, op);
@@ -1142,7 +1127,7 @@ asmlinkage int irix_BSDsetpgrp(int pid, int pgrp)
 	return error;
 }
 
-asmlinkage int irix_systeminfo(int cmd, char *buf, int cnt)
+asmlinkage int irix_systeminfo(int cmd, char __user *buf, int cnt)
 {
 	printk("[%s:%d] Wheee.. irix_systeminfo(%d,%p,%d)\n",
 	       current->comm, current->pid, cmd, buf, cnt);
@@ -1158,14 +1143,14 @@ struct iuname {
 	char _unused3[257], _unused4[257], _unused5[257];
 };
 
-asmlinkage int irix_uname(struct iuname *buf)
+asmlinkage int irix_uname(struct iuname __user *buf)
 {
 	down_read(&uts_sem);
-	if (copy_to_user(system_utsname.sysname, buf->sysname, 65)
-	    || copy_to_user(system_utsname.nodename, buf->nodename, 65)
-	    || copy_to_user(system_utsname.release, buf->release, 65)
-	    || copy_to_user(system_utsname.version, buf->version, 65)
-	    || copy_to_user(system_utsname.machine, buf->machine, 65)) {
+	if (copy_from_user(system_utsname.sysname, buf->sysname, 65)
+	    || copy_from_user(system_utsname.nodename, buf->nodename, 65)
+	    || copy_from_user(system_utsname.release, buf->release, 65)
+	    || copy_from_user(system_utsname.version, buf->version, 65)
+	    || copy_from_user(system_utsname.machine, buf->machine, 65)) {
 		return -EFAULT;
 	}
 	up_read(&uts_sem);
@@ -1175,7 +1160,7 @@ asmlinkage int irix_uname(struct iuname *buf)
 
 #undef DEBUG_XSTAT
 
-static int irix_xstat32_xlate(struct kstat *stat, void *ubuf)
+static int irix_xstat32_xlate(struct kstat *stat, void __user *ubuf)
 {
 	struct xstat32 {
 		u32 st_dev, st_pad1[3], st_ino, st_mode, st_nlink, st_uid, st_gid;
@@ -1215,7 +1200,7 @@ static int irix_xstat32_xlate(struct kstat *stat, void *ubuf)
 	return copy_to_user(ubuf, &ub, sizeof(ub)) ? -EFAULT : 0;
 }
 
-static int irix_xstat64_xlate(struct kstat *stat, void *ubuf)
+static int irix_xstat64_xlate(struct kstat *stat, void __user *ubuf)
 {
 	struct xstat64 {
 		u32 st_dev; s32 st_pad1[3];
@@ -1265,7 +1250,7 @@ static int irix_xstat64_xlate(struct kstat *stat, void *ubuf)
 	return copy_to_user(ubuf, &ks, sizeof(ks)) ? -EFAULT : 0;
 }
 
-asmlinkage int irix_xstat(int version, char *filename, struct stat *statbuf)
+asmlinkage int irix_xstat(int version, char __user *filename, struct stat __user *statbuf)
 {
 	int retval;
 	struct kstat stat;
@@ -1291,7 +1276,7 @@ asmlinkage int irix_xstat(int version, char *filename, struct stat *statbuf)
 	return retval;
 }
 
-asmlinkage int irix_lxstat(int version, char *filename, struct stat *statbuf)
+asmlinkage int irix_lxstat(int version, char __user *filename, struct stat __user *statbuf)
 {
 	int error;
 	struct kstat stat;
@@ -1318,7 +1303,7 @@ asmlinkage int irix_lxstat(int version, char *filename, struct stat *statbuf)
 	return error;
 }
 
-asmlinkage int irix_fxstat(int version, int fd, struct stat *statbuf)
+asmlinkage int irix_fxstat(int version, int fd, struct stat __user *statbuf)
 {
 	int error;
 	struct kstat stat;
@@ -1344,7 +1329,7 @@ asmlinkage int irix_fxstat(int version, int fd, struct stat *statbuf)
 	return error;
 }
 
-asmlinkage int irix_xmknod(int ver, char *filename, int mode, unsigned dev)
+asmlinkage int irix_xmknod(int ver, char __user *filename, int mode, unsigned dev)
 {
 	int retval;
 	printk("[%s:%d] Wheee.. irix_xmknod(%d,%s,%x,%x)\n",
@@ -1364,7 +1349,7 @@ asmlinkage int irix_xmknod(int ver, char *filename, int mode, unsigned dev)
 	return retval;
 }
 
-asmlinkage int irix_swapctl(int cmd, char *arg)
+asmlinkage int irix_swapctl(int cmd, char __user *arg)
 {
 	printk("[%s:%d] Wheee.. irix_swapctl(%d,%p)\n",
 	       current->comm, current->pid, cmd, arg);
@@ -1380,7 +1365,7 @@ struct irix_statvfs {
 	char	f_fstr[32]; u32 f_filler[16];
 };
 
-asmlinkage int irix_statvfs(char *fname, struct irix_statvfs *buf)
+asmlinkage int irix_statvfs(char __user *fname, struct irix_statvfs __user *buf)
 {
 	struct nameidata nd;
 	struct kstatfs kbuf;
@@ -1388,10 +1373,9 @@ asmlinkage int irix_statvfs(char *fname, struct irix_statvfs *buf)
 
 	printk("[%s:%d] Wheee.. irix_statvfs(%s,%p)\n",
 	       current->comm, current->pid, fname, buf);
-	if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs))) {
-		error = -EFAULT;
-		goto out;
-	}
+	if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs)))
+		return -EFAULT;
+
 	error = user_path_walk(fname, &nd);
 	if (error)
 		goto out;
@@ -1399,27 +1383,25 @@ asmlinkage int irix_statvfs(char *fname, struct irix_statvfs *buf)
 	if (error)
 		goto dput_and_out;
 
-	__put_user(kbuf.f_bsize, &buf->f_bsize);
-	__put_user(kbuf.f_frsize, &buf->f_frsize);
-	__put_user(kbuf.f_blocks, &buf->f_blocks);
-	__put_user(kbuf.f_bfree, &buf->f_bfree);
-	__put_user(kbuf.f_bfree, &buf->f_bavail);  /* XXX hackety hack... */
-	__put_user(kbuf.f_files, &buf->f_files);
-	__put_user(kbuf.f_ffree, &buf->f_ffree);
-	__put_user(kbuf.f_ffree, &buf->f_favail);  /* XXX hackety hack... */
+	error |= __put_user(kbuf.f_bsize, &buf->f_bsize);
+	error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
+	error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
+	error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
+	error |= __put_user(kbuf.f_bfree, &buf->f_bavail);  /* XXX hackety hack... */
+	error |= __put_user(kbuf.f_files, &buf->f_files);
+	error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
+	error |= __put_user(kbuf.f_ffree, &buf->f_favail);  /* XXX hackety hack... */
 #ifdef __MIPSEB__
-	__put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
+	error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
 #else
-	__put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
+	error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
 #endif
 	for (i = 0; i < 16; i++)
-		__put_user(0, &buf->f_basetype[i]);
-	__put_user(0, &buf->f_flag);
-	__put_user(kbuf.f_namelen, &buf->f_namemax);
+		error |= __put_user(0, &buf->f_basetype[i]);
+	error |= __put_user(0, &buf->f_flag);
+	error |= __put_user(kbuf.f_namelen, &buf->f_namemax);
 	for (i = 0; i < 32; i++)
-		__put_user(0, &buf->f_fstr[i]);
-
-	error = 0;
+		error |= __put_user(0, &buf->f_fstr[i]);
 
 dput_and_out:
 	path_release(&nd);
@@ -1427,7 +1409,7 @@ out:
 	return error;
 }
 
-asmlinkage int irix_fstatvfs(int fd, struct irix_statvfs *buf)
+asmlinkage int irix_fstatvfs(int fd, struct irix_statvfs __user *buf)
 {
 	struct kstatfs kbuf;
 	struct file *file;
@@ -1436,10 +1418,9 @@ asmlinkage int irix_fstatvfs(int fd, struct irix_statvfs *buf)
 	printk("[%s:%d] Wheee.. irix_fstatvfs(%d,%p)\n",
 	       current->comm, current->pid, fd, buf);
 
-	if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs))) {
-		error = -EFAULT;
-		goto out;
-	}
+	if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs)))
+		return -EFAULT;
+
 	if (!(file = fget(fd))) {
 		error = -EBADF;
 		goto out;
@@ -1448,24 +1429,24 @@ asmlinkage int irix_fstatvfs(int fd, struct irix_statvfs *buf)
 	if (error)
 		goto out_f;
 
-	__put_user(kbuf.f_bsize, &buf->f_bsize);
-	__put_user(kbuf.f_frsize, &buf->f_frsize);
-	__put_user(kbuf.f_blocks, &buf->f_blocks);
-	__put_user(kbuf.f_bfree, &buf->f_bfree);
-	__put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */
-	__put_user(kbuf.f_files, &buf->f_files);
-	__put_user(kbuf.f_ffree, &buf->f_ffree);
-	__put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */
+	error = __put_user(kbuf.f_bsize, &buf->f_bsize);
+	error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
+	error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
+	error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
+	error |= __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */
+	error |= __put_user(kbuf.f_files, &buf->f_files);
+	error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
+	error |= __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */
 #ifdef __MIPSEB__
-	__put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
+	error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
 #else
-	__put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
+	error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
 #endif
 	for(i = 0; i < 16; i++)
-		__put_user(0, &buf->f_basetype[i]);
-	__put_user(0, &buf->f_flag);
-	__put_user(kbuf.f_namelen, &buf->f_namemax);
-	__clear_user(&buf->f_fstr, sizeof(buf->f_fstr));
+		error |= __put_user(0, &buf->f_basetype[i]);
+	error |= __put_user(0, &buf->f_flag);
+	error |= __put_user(kbuf.f_namelen, &buf->f_namemax);
+	error |= __clear_user(&buf->f_fstr, sizeof(buf->f_fstr)) ? -EFAULT : 0;
 
 out_f:
 	fput(file);
@@ -1489,7 +1470,7 @@ asmlinkage int irix_sigqueue(int pid, int sig, int code, int val)
 	return -EINVAL;
 }
 
-asmlinkage int irix_truncate64(char *name, int pad, int size1, int size2)
+asmlinkage int irix_truncate64(char __user *name, int pad, int size1, int size2)
 {
 	int retval;
 
@@ -1522,6 +1503,7 @@ asmlinkage int irix_mmap64(struct pt_regs *regs)
 	int len, prot, flags, fd, off1, off2, error, base = 0;
 	unsigned long addr, pgoff, *sp;
 	struct file *file = NULL;
+	int err;
 
 	if (regs->regs[2] == 1000)
 		base = 1;
@@ -1531,36 +1513,31 @@ asmlinkage int irix_mmap64(struct pt_regs *regs)
 	prot = regs->regs[base + 6];
 	if (!base) {
 		flags = regs->regs[base + 7];
-		if (!access_ok(VERIFY_READ, sp, (4 * sizeof(unsigned long)))) {
-			error = -EFAULT;
-			goto out;
-		}
+		if (!access_ok(VERIFY_READ, sp, (4 * sizeof(unsigned long))))
+			return -EFAULT;
 		fd = sp[0];
-		__get_user(off1, &sp[1]);
-		__get_user(off2, &sp[2]);
+		err = __get_user(off1, &sp[1]);
+		err |= __get_user(off2, &sp[2]);
 	} else {
-		if (!access_ok(VERIFY_READ, sp, (5 * sizeof(unsigned long)))) {
-			error = -EFAULT;
-			goto out;
-		}
-		__get_user(flags, &sp[0]);
-		__get_user(fd, &sp[1]);
-		__get_user(off1, &sp[2]);
-		__get_user(off2, &sp[3]);
+		if (!access_ok(VERIFY_READ, sp, (5 * sizeof(unsigned long))))
+			return -EFAULT;
+		err = __get_user(flags, &sp[0]);
+		err |= __get_user(fd, &sp[1]);
+		err |= __get_user(off1, &sp[2]);
+		err |= __get_user(off2, &sp[3]);
 	}
 
-	if (off1 & PAGE_MASK) {
-		error = -EOVERFLOW;
-		goto out;
-	}
+	if (err)
+		return err;
+
+	if (off1 & PAGE_MASK)
+		return -EOVERFLOW;
 
 	pgoff = (off1 << (32 - PAGE_SHIFT)) | (off2 >> PAGE_SHIFT);
 
 	if (!(flags & MAP_ANONYMOUS)) {
-		if (!(file = fget(fd))) {
-			error = -EBADF;
-			goto out;
-		}
+		if (!(file = fget(fd)))
+			return -EBADF;
 
 		/* Ok, bad taste hack follows, try to think in something else
 		   when reading this */
@@ -1570,7 +1547,7 @@ asmlinkage int irix_mmap64(struct pt_regs *regs)
 
 			if (max_size > file->f_dentry->d_inode->i_size) {
 				old_pos = sys_lseek (fd, max_size - 1, 0);
-				sys_write (fd, "", 1);
+				sys_write (fd, (void __user *) "", 1);
 				sys_lseek (fd, old_pos, 0);
 			}
 		}
@@ -1585,7 +1562,6 @@ asmlinkage int irix_mmap64(struct pt_regs *regs)
 	if (file)
 		fput(file);
 
-out:
 	return error;
 }
 
@@ -1597,7 +1573,7 @@ asmlinkage int irix_dmi(struct pt_regs *regs)
 	return -EINVAL;
 }
 
-asmlinkage int irix_pread(int fd, char *buf, int cnt, int off64,
+asmlinkage int irix_pread(int fd, char __user *buf, int cnt, int off64,
 			  int off1, int off2)
 {
 	printk("[%s:%d] Wheee.. irix_pread(%d,%p,%d,%d,%d,%d)\n",
@@ -1606,7 +1582,7 @@ asmlinkage int irix_pread(int fd, char *buf, int cnt, int off64,
 	return -EINVAL;
 }
 
-asmlinkage int irix_pwrite(int fd, char *buf, int cnt, int off64,
+asmlinkage int irix_pwrite(int fd, char __user *buf, int cnt, int off64,
 			   int off1, int off2)
 {
 	printk("[%s:%d] Wheee.. irix_pwrite(%d,%p,%d,%d,%d,%d)\n",
@@ -1638,7 +1614,7 @@ struct irix_statvfs64 {
 	u32  f_filler[16];
 };
 
-asmlinkage int irix_statvfs64(char *fname, struct irix_statvfs64 *buf)
+asmlinkage int irix_statvfs64(char __user *fname, struct irix_statvfs64 __user *buf)
 {
 	struct nameidata nd;
 	struct kstatfs kbuf;
@@ -1650,6 +1626,7 @@ asmlinkage int irix_statvfs64(char *fname, struct irix_statvfs64 *buf)
 		error = -EFAULT;
 		goto out;
 	}
+
 	error = user_path_walk(fname, &nd);
 	if (error)
 		goto out;
@@ -1657,27 +1634,25 @@ asmlinkage int irix_statvfs64(char *fname, struct irix_statvfs64 *buf)
 	if (error)
 		goto dput_and_out;
 
-	__put_user(kbuf.f_bsize, &buf->f_bsize);
-	__put_user(kbuf.f_frsize, &buf->f_frsize);
-	__put_user(kbuf.f_blocks, &buf->f_blocks);
-	__put_user(kbuf.f_bfree, &buf->f_bfree);
-	__put_user(kbuf.f_bfree, &buf->f_bavail);  /* XXX hackety hack... */
-	__put_user(kbuf.f_files, &buf->f_files);
-	__put_user(kbuf.f_ffree, &buf->f_ffree);
-	__put_user(kbuf.f_ffree, &buf->f_favail);  /* XXX hackety hack... */
+	error = __put_user(kbuf.f_bsize, &buf->f_bsize);
+	error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
+	error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
+	error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
+	error |= __put_user(kbuf.f_bfree, &buf->f_bavail);  /* XXX hackety hack... */
+	error |= __put_user(kbuf.f_files, &buf->f_files);
+	error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
+	error |= __put_user(kbuf.f_ffree, &buf->f_favail);  /* XXX hackety hack... */
 #ifdef __MIPSEB__
-	__put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
+	error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
 #else
-	__put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
+	error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
 #endif
 	for(i = 0; i < 16; i++)
-		__put_user(0, &buf->f_basetype[i]);
-	__put_user(0, &buf->f_flag);
-	__put_user(kbuf.f_namelen, &buf->f_namemax);
+		error |= __put_user(0, &buf->f_basetype[i]);
+	error |= __put_user(0, &buf->f_flag);
+	error |= __put_user(kbuf.f_namelen, &buf->f_namemax);
 	for(i = 0; i < 32; i++)
-		__put_user(0, &buf->f_fstr[i]);
-
-	error = 0;
+		error |= __put_user(0, &buf->f_fstr[i]);
 
 dput_and_out:
 	path_release(&nd);
@@ -1685,7 +1660,7 @@ out:
 	return error;
 }
 
-asmlinkage int irix_fstatvfs64(int fd, struct irix_statvfs *buf)
+asmlinkage int irix_fstatvfs64(int fd, struct irix_statvfs __user *buf)
 {
 	struct kstatfs kbuf;
 	struct file *file;
@@ -1706,24 +1681,24 @@ asmlinkage int irix_fstatvfs64(int fd, struct irix_statvfs *buf)
 	if (error)
 		goto out_f;
 
-	__put_user(kbuf.f_bsize, &buf->f_bsize);
-	__put_user(kbuf.f_frsize, &buf->f_frsize);
-	__put_user(kbuf.f_blocks, &buf->f_blocks);
-	__put_user(kbuf.f_bfree, &buf->f_bfree);
-	__put_user(kbuf.f_bfree, &buf->f_bavail);  /* XXX hackety hack... */
-	__put_user(kbuf.f_files, &buf->f_files);
-	__put_user(kbuf.f_ffree, &buf->f_ffree);
-	__put_user(kbuf.f_ffree, &buf->f_favail);  /* XXX hackety hack... */
+	error = __put_user(kbuf.f_bsize, &buf->f_bsize);
+	error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
+	error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
+	error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
+	error |= __put_user(kbuf.f_bfree, &buf->f_bavail);  /* XXX hackety hack... */
+	error |= __put_user(kbuf.f_files, &buf->f_files);
+	error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
+	error |= __put_user(kbuf.f_ffree, &buf->f_favail);  /* XXX hackety hack... */
 #ifdef __MIPSEB__
-	__put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
+	error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
 #else
-	__put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
+	error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
 #endif
 	for(i = 0; i < 16; i++)
-		__put_user(0, &buf->f_basetype[i]);
-	__put_user(0, &buf->f_flag);
-	__put_user(kbuf.f_namelen, &buf->f_namemax);
-	__clear_user(buf->f_fstr, sizeof(buf->f_fstr[i]));
+		error |= __put_user(0, &buf->f_basetype[i]);
+	error |= __put_user(0, &buf->f_flag);
+	error |= __put_user(kbuf.f_namelen, &buf->f_namemax);
+	error |= __clear_user(buf->f_fstr, sizeof(buf->f_fstr[i])) ? -EFAULT : 0;
 
 out_f:
 	fput(file);
@@ -1731,9 +1706,9 @@ out:
 	return error;
 }
 
-asmlinkage int irix_getmountid(char *fname, unsigned long *midbuf)
+asmlinkage int irix_getmountid(char __user *fname, unsigned long __user *midbuf)
 {
-	int err = 0;
+	int err;
 
 	printk("[%s:%d] irix_getmountid(%s, %p)\n",
 	       current->comm, current->pid, fname, midbuf);
@@ -1746,7 +1721,7 @@ asmlinkage int irix_getmountid(char *fname, unsigned long *midbuf)
 	 * fsid of the filesystem to try and make the right decision, but
 	 * we don't have this so for now. XXX
 	 */
-	err |= __put_user(0, &midbuf[0]);
+	err = __put_user(0, &midbuf[0]);
 	err |= __put_user(0, &midbuf[1]);
 	err |= __put_user(0, &midbuf[2]);
 	err |= __put_user(0, &midbuf[3]);
@@ -1773,8 +1748,8 @@ struct irix_dirent32 {
 };
 
 struct irix_dirent32_callback {
-	struct irix_dirent32 *current_dir;
-	struct irix_dirent32 *previous;
+	struct irix_dirent32 __user *current_dir;
+	struct irix_dirent32 __user *previous;
 	int count;
 	int error;
 };
@@ -1782,13 +1757,13 @@ struct irix_dirent32_callback {
 #define NAME_OFFSET32(de) ((int) ((de)->d_name - (char *) (de)))
 #define ROUND_UP32(x) (((x)+sizeof(u32)-1) & ~(sizeof(u32)-1))
 
-static int irix_filldir32(void *__buf, const char *name, int namlen,
-                          loff_t offset, ino_t ino, unsigned int d_type)
+static int irix_filldir32(void *__buf, const char *name,
+	int namlen, loff_t offset, ino_t ino, unsigned int d_type)
 {
-	struct irix_dirent32 *dirent;
-	struct irix_dirent32_callback *buf =
-		 (struct irix_dirent32_callback *)__buf;
+	struct irix_dirent32 __user *dirent;
+	struct irix_dirent32_callback *buf = __buf;
 	unsigned short reclen = ROUND_UP32(NAME_OFFSET32(dirent) + namlen + 1);
+	int err = 0;
 
 #ifdef DEBUG_GETDENTS
 	printk("\nirix_filldir32[reclen<%d>namlen<%d>count<%d>]",
@@ -1799,25 +1774,26 @@ static int irix_filldir32(void *__buf, const char *name, int namlen,
 		return -EINVAL;
 	dirent = buf->previous;
 	if (dirent)
-		__put_user(offset, &dirent->d_off);
+		err = __put_user(offset, &dirent->d_off);
 	dirent = buf->current_dir;
-	buf->previous = dirent;
-	__put_user(ino, &dirent->d_ino);
-	__put_user(reclen, &dirent->d_reclen);
-	copy_to_user(dirent->d_name, name, namlen);
-	__put_user(0, &dirent->d_name[namlen]);
-	((char *) dirent) += reclen;
+	err |= __put_user(dirent, &buf->previous);
+	err |= __put_user(ino, &dirent->d_ino);
+	err |= __put_user(reclen, &dirent->d_reclen);
+	err |= copy_to_user((char __user *)dirent->d_name, name, namlen) ? -EFAULT : 0;
+	err |= __put_user(0, &dirent->d_name[namlen]);
+	dirent = (struct irix_dirent32 __user *) ((char __user *) dirent + reclen);
+
 	buf->current_dir = dirent;
 	buf->count -= reclen;
 
-	return 0;
+	return err;
 }
 
-asmlinkage int irix_ngetdents(unsigned int fd, void * dirent,
-	unsigned int count, int *eob)
+asmlinkage int irix_ngetdents(unsigned int fd, void __user * dirent,
+	unsigned int count, int __user *eob)
 {
 	struct file *file;
-	struct irix_dirent32 *lastdirent;
+	struct irix_dirent32 __user *lastdirent;
 	struct irix_dirent32_callback buf;
 	int error;
 
@@ -1830,7 +1806,7 @@ asmlinkage int irix_ngetdents(unsigned int fd, void * dirent,
 	if (!file)
 		goto out;
 
-	buf.current_dir = (struct irix_dirent32 *) dirent;
+	buf.current_dir = (struct irix_dirent32 __user *) dirent;
 	buf.previous = NULL;
 	buf.count = count;
 	buf.error = 0;
@@ -1870,8 +1846,8 @@ struct irix_dirent64 {
 };
 
 struct irix_dirent64_callback {
-	struct irix_dirent64 *curr;
-	struct irix_dirent64 *previous;
+	struct irix_dirent64 __user *curr;
+	struct irix_dirent64 __user *previous;
 	int count;
 	int error;
 };
@@ -1879,37 +1855,44 @@ struct irix_dirent64_callback {
 #define NAME_OFFSET64(de) ((int) ((de)->d_name - (char *) (de)))
 #define ROUND_UP64(x) (((x)+sizeof(u64)-1) & ~(sizeof(u64)-1))
 
-static int irix_filldir64(void * __buf, const char * name, int namlen,
-			  loff_t offset, ino_t ino, unsigned int d_type)
+static int irix_filldir64(void *__buf, const char *name,
+	int namlen, loff_t offset, ino_t ino, unsigned int d_type)
 {
-	struct irix_dirent64 *dirent;
-	struct irix_dirent64_callback * buf =
-		(struct irix_dirent64_callback *) __buf;
+	struct irix_dirent64 __user *dirent;
+	struct irix_dirent64_callback * buf = __buf;
 	unsigned short reclen = ROUND_UP64(NAME_OFFSET64(dirent) + namlen + 1);
+	int err = 0;
 
-	buf->error = -EINVAL;	/* only used if we fail.. */
+	if (!access_ok(VERIFY_WRITE, buf, sizeof(*buf)))
+		return -EFAULT;
+
+	if (__put_user(-EINVAL, &buf->error))	/* only used if we fail.. */
+		return -EFAULT;
 	if (reclen > buf->count)
 		return -EINVAL;
 	dirent = buf->previous;
 	if (dirent)
-		__put_user(offset, &dirent->d_off);
+		err = __put_user(offset, &dirent->d_off);
 	dirent = buf->curr;
 	buf->previous = dirent;
-	__put_user(ino, &dirent->d_ino);
-	__put_user(reclen, &dirent->d_reclen);
-	__copy_to_user(dirent->d_name, name, namlen);
-	__put_user(0, &dirent->d_name[namlen]);
-	((char *) dirent) += reclen;
+	err |= __put_user(ino, &dirent->d_ino);
+	err |= __put_user(reclen, &dirent->d_reclen);
+	err |= __copy_to_user((char __user *)dirent->d_name, name, namlen)
+	       ? -EFAULT : 0;
+	err |= __put_user(0, &dirent->d_name[namlen]);
+
+	dirent = (struct irix_dirent64 __user *) ((char __user *) dirent + reclen);
+
 	buf->curr = dirent;
 	buf->count -= reclen;
 
-	return 0;
+	return err;
 }
 
-asmlinkage int irix_getdents64(int fd, void *dirent, int cnt)
+asmlinkage int irix_getdents64(int fd, void __user *dirent, int cnt)
 {
 	struct file *file;
-	struct irix_dirent64 *lastdirent;
+	struct irix_dirent64 __user *lastdirent;
 	struct irix_dirent64_callback buf;
 	int error;
 
@@ -1929,7 +1912,7 @@ asmlinkage int irix_getdents64(int fd, void *dirent, int cnt)
 	if (cnt < (sizeof(struct irix_dirent64) + 255))
 		goto out_f;
 
-	buf.curr = (struct irix_dirent64 *) dirent;
+	buf.curr = (struct irix_dirent64 __user *) dirent;
 	buf.previous = NULL;
 	buf.count = cnt;
 	buf.error = 0;
@@ -1941,7 +1924,8 @@ asmlinkage int irix_getdents64(int fd, void *dirent, int cnt)
 		error = buf.error;
 		goto out_f;
 	}
-	lastdirent->d_off = (u64) file->f_pos;
+	if (put_user(file->f_pos, &lastdirent->d_off))
+		return -EFAULT;
 #ifdef DEBUG_GETDENTS
 	printk("returning %d\n", cnt - buf.count);
 #endif
@@ -1953,10 +1937,10 @@ out:
 	return error;
 }
 
-asmlinkage int irix_ngetdents64(int fd, void *dirent, int cnt, int *eob)
+asmlinkage int irix_ngetdents64(int fd, void __user *dirent, int cnt, int *eob)
 {
 	struct file *file;
-	struct irix_dirent64 *lastdirent;
+	struct irix_dirent64 __user *lastdirent;
 	struct irix_dirent64_callback buf;
 	int error;
 
@@ -1978,7 +1962,7 @@ asmlinkage int irix_ngetdents64(int fd, void *dirent, int cnt, int *eob)
 		goto out_f;
 
 	*eob = 0;
-	buf.curr = (struct irix_dirent64 *) dirent;
+	buf.curr = (struct irix_dirent64 __user *) dirent;
 	buf.previous = NULL;
 	buf.count = cnt;
 	buf.error = 0;
@@ -1990,7 +1974,8 @@ asmlinkage int irix_ngetdents64(int fd, void *dirent, int cnt, int *eob)
 		error = buf.error;
 		goto out_f;
 	}
-	lastdirent->d_off = (u64) file->f_pos;
+	if (put_user(file->f_pos, &lastdirent->d_off))
+		return -EFAULT;
 #ifdef DEBUG_GETDENTS
 	printk("eob=%d returning %d\n", *eob, cnt - buf.count);
 #endif
@@ -2053,14 +2038,14 @@ out:
 	return retval;
 }
 
-asmlinkage int irix_utssys(char *inbuf, int arg, int type, char *outbuf)
+asmlinkage int irix_utssys(char __user *inbuf, int arg, int type, char __user *outbuf)
 {
 	int retval;
 
 	switch(type) {
 	case 0:
 		/* uname() */
-		retval = irix_uname((struct iuname *)inbuf);
+		retval = irix_uname((struct iuname __user *)inbuf);
 		goto out;
 
 	case 2:
diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
index 0dd0df7a3b04..787ed541d442 100644
--- a/arch/mips/kernel/time.c
+++ b/arch/mips/kernel/time.c
@@ -11,6 +11,7 @@
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
+#include <linux/config.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -25,6 +26,7 @@
 #include <linux/module.h>
 
 #include <asm/bootinfo.h>
+#include <asm/cache.h>
 #include <asm/compiler.h>
 #include <asm/cpu.h>
 #include <asm/cpu-features.h>
@@ -43,10 +45,6 @@
 
 #define TICK_SIZE	(tick_nsec / 1000)
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 /*
  * forward reference
  */
@@ -76,7 +74,7 @@ int (*rtc_set_mmss)(unsigned long);
 static unsigned int sll32_usecs_per_cycle;
 
 /* how many counter cycles in a jiffy */
-static unsigned long cycles_per_jiffy;
+static unsigned long cycles_per_jiffy __read_mostly;
 
 /* Cycle counter value at the previous timer interrupt.. */
 static unsigned int timerhi, timerlo;
@@ -98,7 +96,10 @@ static unsigned int null_hpt_read(void)
 	return 0;
 }
 
-static void null_hpt_init(unsigned int count) { /* nothing */ }
+static void null_hpt_init(unsigned int count)
+{
+	/* nothing */
+}
 
 
 /*
@@ -108,8 +109,10 @@ static void c0_timer_ack(void)
 {
 	unsigned int count;
 
+#ifndef CONFIG_SOC_PNX8550	/* pnx8550 resets to zero */
 	/* Ack this timer interrupt and set the next one.  */
 	expirelo += cycles_per_jiffy;
+#endif
 	write_c0_compare(expirelo);
 
 	/* Check to see if we have missed any timer interrupts.  */
@@ -224,7 +227,6 @@ int do_settimeofday(struct timespec *tv)
 	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
 
 	ntp_clear();
-
 	write_sequnlock_irq(&xtime_lock);
 	clock_was_set();
 	return 0;
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index a53b1ed7b386..7058893d5ad2 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -9,7 +9,7 @@
  * Copyright (C) 1999 Silicon Graphics, Inc.
  * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
  * Copyright (C) 2000, 01 MIPS Technologies, Inc.
- * Copyright (C) 2002, 2003, 2004  Maciej W. Rozycki
+ * Copyright (C) 2002, 2003, 2004, 2005  Maciej W. Rozycki
  */
 #include <linux/config.h>
 #include <linux/init.h>
@@ -20,12 +20,16 @@
 #include <linux/smp_lock.h>
 #include <linux/spinlock.h>
 #include <linux/kallsyms.h>
+#include <linux/bootmem.h>
 
 #include <asm/bootinfo.h>
 #include <asm/branch.h>
 #include <asm/break.h>
 #include <asm/cpu.h>
+#include <asm/dsp.h>
 #include <asm/fpu.h>
+#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
 #include <asm/module.h>
 #include <asm/pgtable.h>
 #include <asm/ptrace.h>
@@ -54,14 +58,19 @@ extern asmlinkage void handle_tr(void);
 extern asmlinkage void handle_fpe(void);
 extern asmlinkage void handle_mdmx(void);
 extern asmlinkage void handle_watch(void);
+extern asmlinkage void handle_mt(void);
+extern asmlinkage void handle_dsp(void);
 extern asmlinkage void handle_mcheck(void);
 extern asmlinkage void handle_reserved(void);
 
-extern int fpu_emulator_cop1Handler(int xcptno, struct pt_regs *xcp,
+extern int fpu_emulator_cop1Handler(struct pt_regs *xcp,
 	struct mips_fpu_soft_struct *ctx);
 
 void (*board_be_init)(void);
 int (*board_be_handler)(struct pt_regs *regs, int is_fixup);
+void (*board_nmi_handler_setup)(void);
+void (*board_ejtag_handler_setup)(void);
+void (*board_bind_eic_interrupt)(int irq, int regset);
 
 /*
  * These constant is for searching for possible module text segments.
@@ -201,32 +210,47 @@ void show_regs(struct pt_regs *regs)
 
 	printk("Status: %08x    ", (uint32_t) regs->cp0_status);
 
-	if (regs->cp0_status & ST0_KX)
-		printk("KX ");
-	if (regs->cp0_status & ST0_SX)
-		printk("SX ");
-	if (regs->cp0_status & ST0_UX)
-		printk("UX ");
-	switch (regs->cp0_status & ST0_KSU) {
-	case KSU_USER:
-		printk("USER ");
-		break;
-	case KSU_SUPERVISOR:
-		printk("SUPERVISOR ");
-		break;
-	case KSU_KERNEL:
-		printk("KERNEL ");
-		break;
-	default:
-		printk("BAD_MODE ");
-		break;
+	if (current_cpu_data.isa_level == MIPS_CPU_ISA_I) {
+		if (regs->cp0_status & ST0_KUO)
+			printk("KUo ");
+		if (regs->cp0_status & ST0_IEO)
+			printk("IEo ");
+		if (regs->cp0_status & ST0_KUP)
+			printk("KUp ");
+		if (regs->cp0_status & ST0_IEP)
+			printk("IEp ");
+		if (regs->cp0_status & ST0_KUC)
+			printk("KUc ");
+		if (regs->cp0_status & ST0_IEC)
+			printk("IEc ");
+	} else {
+		if (regs->cp0_status & ST0_KX)
+			printk("KX ");
+		if (regs->cp0_status & ST0_SX)
+			printk("SX ");
+		if (regs->cp0_status & ST0_UX)
+			printk("UX ");
+		switch (regs->cp0_status & ST0_KSU) {
+		case KSU_USER:
+			printk("USER ");
+			break;
+		case KSU_SUPERVISOR:
+			printk("SUPERVISOR ");
+			break;
+		case KSU_KERNEL:
+			printk("KERNEL ");
+			break;
+		default:
+			printk("BAD_MODE ");
+			break;
+		}
+		if (regs->cp0_status & ST0_ERL)
+			printk("ERL ");
+		if (regs->cp0_status & ST0_EXL)
+			printk("EXL ");
+		if (regs->cp0_status & ST0_IE)
+			printk("IE ");
 	}
-	if (regs->cp0_status & ST0_ERL)
-		printk("ERL ");
-	if (regs->cp0_status & ST0_EXL)
-		printk("EXL ");
-	if (regs->cp0_status & ST0_IE)
-		printk("IE ");
 	printk("\n");
 
 	printk("Cause : %08x\n", cause);
@@ -252,29 +276,18 @@ void show_registers(struct pt_regs *regs)
 
 static DEFINE_SPINLOCK(die_lock);
 
-NORET_TYPE void __die(const char * str, struct pt_regs * regs,
-	const char * file, const char * func, unsigned long line)
+NORET_TYPE void ATTRIB_NORET die(const char * str, struct pt_regs * regs)
 {
 	static int die_counter;
 
 	console_verbose();
 	spin_lock_irq(&die_lock);
-	printk("%s", str);
-	if (file && func)
-		printk(" in %s:%s, line %ld", file, func, line);
-	printk("[#%d]:\n", ++die_counter);
+	printk("%s[#%d]:\n", str, ++die_counter);
 	show_registers(regs);
 	spin_unlock_irq(&die_lock);
 	do_exit(SIGSEGV);
 }
 
-void __die_if_kernel(const char * str, struct pt_regs * regs,
-		     const char * file, const char * func, unsigned long line)
-{
-	if (!user_mode(regs))
-		__die(str, regs, file, func, line);
-}
-
 extern const struct exception_table_entry __start___dbe_table[];
 extern const struct exception_table_entry __stop___dbe_table[];
 
@@ -339,9 +352,9 @@ asmlinkage void do_be(struct pt_regs *regs)
 
 static inline int get_insn_opcode(struct pt_regs *regs, unsigned int *opcode)
 {
-	unsigned int *epc;
+	unsigned int __user *epc;
 
-	epc = (unsigned int *) regs->cp0_epc +
+	epc = (unsigned int __user *) regs->cp0_epc +
 	      ((regs->cp0_cause & CAUSEF_BD) != 0);
 	if (!get_user(*opcode, epc))
 		return 0;
@@ -360,6 +373,10 @@ static inline int get_insn_opcode(struct pt_regs *regs, unsigned int *opcode)
 #define OFFSET 0x0000ffff
 #define LL     0xc0000000
 #define SC     0xe0000000
+#define SPEC3  0x7c000000
+#define RD     0x0000f800
+#define FUNC   0x0000003f
+#define RDHWR  0x0000003b
 
 /*
  * The ll_bit is cleared by r*_switch.S
@@ -371,7 +388,7 @@ static struct task_struct *ll_task = NULL;
 
 static inline void simulate_ll(struct pt_regs *regs, unsigned int opcode)
 {
-	unsigned long value, *vaddr;
+	unsigned long value, __user *vaddr;
 	long offset;
 	int signal = 0;
 
@@ -385,7 +402,8 @@ static inline void simulate_ll(struct pt_regs *regs, unsigned int opcode)
 	offset <<= 16;
 	offset >>= 16;
 
-	vaddr = (unsigned long *)((long)(regs->regs[(opcode & BASE) >> 21]) + offset);
+	vaddr = (unsigned long __user *)
+	        ((unsigned long)(regs->regs[(opcode & BASE) >> 21]) + offset);
 
 	if ((unsigned long)vaddr & 3) {
 		signal = SIGBUS;
@@ -407,9 +425,10 @@ static inline void simulate_ll(struct pt_regs *regs, unsigned int opcode)
 
 	preempt_enable();
 
+	compute_return_epc(regs);
+
 	regs->regs[(opcode & RT) >> 16] = value;
 
-	compute_return_epc(regs);
 	return;
 
 sig:
@@ -418,7 +437,8 @@ sig:
 
 static inline void simulate_sc(struct pt_regs *regs, unsigned int opcode)
 {
-	unsigned long *vaddr, reg;
+	unsigned long __user *vaddr;
+	unsigned long reg;
 	long offset;
 	int signal = 0;
 
@@ -432,7 +452,8 @@ static inline void simulate_sc(struct pt_regs *regs, unsigned int opcode)
 	offset <<= 16;
 	offset >>= 16;
 
-	vaddr = (unsigned long *)((long)(regs->regs[(opcode & BASE) >> 21]) + offset);
+	vaddr = (unsigned long __user *)
+	        ((unsigned long)(regs->regs[(opcode & BASE) >> 21]) + offset);
 	reg = (opcode & RT) >> 16;
 
 	if ((unsigned long)vaddr & 3) {
@@ -443,9 +464,9 @@ static inline void simulate_sc(struct pt_regs *regs, unsigned int opcode)
 	preempt_disable();
 
 	if (ll_bit == 0 || ll_task != current) {
+		compute_return_epc(regs);
 		regs->regs[reg] = 0;
 		preempt_enable();
-		compute_return_epc(regs);
 		return;
 	}
 
@@ -456,9 +477,9 @@ static inline void simulate_sc(struct pt_regs *regs, unsigned int opcode)
 		goto sig;
 	}
 
+	compute_return_epc(regs);
 	regs->regs[reg] = 1;
 
-	compute_return_epc(regs);
 	return;
 
 sig:
@@ -491,6 +512,38 @@ static inline int simulate_llsc(struct pt_regs *regs)
 	return -EFAULT;			/* Strange things going on ... */
 }
 
+/*
+ * Simulate trapping 'rdhwr' instructions to provide user accessible
+ * registers not implemented in hardware.  The only current use of this
+ * is the thread area pointer.
+ */
+static inline int simulate_rdhwr(struct pt_regs *regs)
+{
+	struct thread_info *ti = current->thread_info;
+	unsigned int opcode;
+
+	if (unlikely(get_insn_opcode(regs, &opcode)))
+		return -EFAULT;
+
+	if (unlikely(compute_return_epc(regs)))
+		return -EFAULT;
+
+	if ((opcode & OPCODE) == SPEC3 && (opcode & FUNC) == RDHWR) {
+		int rd = (opcode & RD) >> 11;
+		int rt = (opcode & RT) >> 16;
+		switch (rd) {
+			case 29:
+				regs->regs[rt] = ti->tp_value;
+				return 0;
+			default:
+				return -EFAULT;
+		}
+	}
+
+	/* Not ours.  */
+	return -EFAULT;
+}
+
 asmlinkage void do_ov(struct pt_regs *regs)
 {
 	siginfo_t info;
@@ -498,7 +551,7 @@ asmlinkage void do_ov(struct pt_regs *regs)
 	info.si_code = FPE_INTOVF;
 	info.si_signo = SIGFPE;
 	info.si_errno = 0;
-	info.si_addr = (void *)regs->cp0_epc;
+	info.si_addr = (void __user *) regs->cp0_epc;
 	force_sig_info(SIGFPE, &info, current);
 }
 
@@ -512,6 +565,14 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 
 		preempt_disable();
 
+#ifdef CONFIG_PREEMPT
+		if (!is_fpu_owner()) {
+			/* We might lose fpu before disabling preempt... */
+			own_fpu();
+			BUG_ON(!used_math());
+			restore_fp(current);
+		}
+#endif
 		/*
 	 	 * Unimplemented operation exception.  If we've got the full
 		 * software emulator on-board, let's use it...
@@ -523,11 +584,18 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 		 * a bit extreme for what should be an infrequent event.
 		 */
 		save_fp(current);
+		/* Ensure 'resume' not overwrite saved fp context again. */
+		lose_fpu();
+
+		preempt_enable();
 
 		/* Run the emulator */
-		sig = fpu_emulator_cop1Handler (0, regs,
+		sig = fpu_emulator_cop1Handler (regs,
 			&current->thread.fpu.soft);
 
+		preempt_disable();
+
+		own_fpu();	/* Using the FPU again.  */
 		/*
 		 * We can't allow the emulated instruction to leave any of
 		 * the cause bit set in $fcr31.
@@ -584,7 +652,7 @@ asmlinkage void do_bp(struct pt_regs *regs)
 			info.si_code = FPE_INTOVF;
 		info.si_signo = SIGFPE;
 		info.si_errno = 0;
-		info.si_addr = (void *)regs->cp0_epc;
+		info.si_addr = (void __user *) regs->cp0_epc;
 		force_sig_info(SIGFPE, &info, current);
 		break;
 	default:
@@ -621,7 +689,7 @@ asmlinkage void do_tr(struct pt_regs *regs)
 			info.si_code = FPE_INTOVF;
 		info.si_signo = SIGFPE;
 		info.si_errno = 0;
-		info.si_addr = (void *)regs->cp0_epc;
+		info.si_addr = (void __user *) regs->cp0_epc;
 		force_sig_info(SIGFPE, &info, current);
 		break;
 	default:
@@ -637,6 +705,9 @@ asmlinkage void do_ri(struct pt_regs *regs)
 		if (!simulate_llsc(regs))
 			return;
 
+	if (!simulate_rdhwr(regs))
+		return;
+
 	force_sig(SIGILL, current);
 }
 
@@ -650,11 +721,13 @@ asmlinkage void do_cpu(struct pt_regs *regs)
 
 	switch (cpid) {
 	case 0:
-		if (cpu_has_llsc)
-			break;
+		if (!cpu_has_llsc)
+			if (!simulate_llsc(regs))
+				return;
 
-		if (!simulate_llsc(regs))
+		if (!simulate_rdhwr(regs))
 			return;
+
 		break;
 
 	case 1:
@@ -668,15 +741,15 @@ asmlinkage void do_cpu(struct pt_regs *regs)
 			set_used_math();
 		}
 
+		preempt_enable();
+
 		if (!cpu_has_fpu) {
-			int sig = fpu_emulator_cop1Handler(0, regs,
+			int sig = fpu_emulator_cop1Handler(regs,
 						&current->thread.fpu.soft);
 			if (sig)
 				force_sig(sig, current);
 		}
 
-		preempt_enable();
-
 		return;
 
 	case 2:
@@ -716,6 +789,22 @@ asmlinkage void do_mcheck(struct pt_regs *regs)
 	      (regs->cp0_status & ST0_TS) ? "" : "not ");
 }
 
+asmlinkage void do_mt(struct pt_regs *regs)
+{
+	die_if_kernel("MIPS MT Thread exception in kernel", regs);
+
+	force_sig(SIGILL, current);
+}
+
+
+asmlinkage void do_dsp(struct pt_regs *regs)
+{
+	if (cpu_has_dsp)
+		panic("Unexpected DSP exception\n");
+
+	force_sig(SIGILL, current);
+}
+
 asmlinkage void do_reserved(struct pt_regs *regs)
 {
 	/*
@@ -728,6 +817,12 @@ asmlinkage void do_reserved(struct pt_regs *regs)
 	      (regs->cp0_cause & 0x7f) >> 2);
 }
 
+asmlinkage void do_default_vi(struct pt_regs *regs)
+{
+	show_regs(regs);
+	panic("Caught unexpected vectored interrupt.");
+}
+
 /*
  * Some MIPS CPUs can enable/disable for cache parity detection, but do
  * it different ways.
@@ -736,16 +831,12 @@ static inline void parity_protection_init(void)
 {
 	switch (current_cpu_data.cputype) {
 	case CPU_24K:
-		/* 24K cache parity not currently implemented in FPGA */
-		printk(KERN_INFO "Disable cache parity protection for "
-		       "MIPS 24K CPU.\n");
-		write_c0_ecc(read_c0_ecc() & ~0x80000000);
-		break;
 	case CPU_5KC:
-		/* Set the PE bit (bit 31) in the c0_ecc register. */
-		printk(KERN_INFO "Enable cache parity protection for "
-		       "MIPS 5KC/24K CPUs.\n");
-		write_c0_ecc(read_c0_ecc() | 0x80000000);
+		write_c0_ecc(0x80000000);
+		back_to_back_c0_hazard();
+		/* Set the PE bit (bit 31) in the c0_errctl register. */
+		printk(KERN_INFO "Cache parity protection %sabled\n",
+		       (read_c0_ecc() & 0x80000000) ? "en" : "dis");
 		break;
 	case CPU_20KC:
 	case CPU_25KF:
@@ -783,7 +874,7 @@ asmlinkage void cache_parity_error(void)
 	       reg_val & (1<<22) ? "E0 " : "");
 	printk("IDX: 0x%08x\n", reg_val & ((1<<22)-1));
 
-#if defined(CONFIG_CPU_MIPS32) || defined (CONFIG_CPU_MIPS64)
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
 	if (reg_val & (1<<22))
 		printk("DErrAddr0: 0x%0*lx\n", field, read_c0_derraddr0());
 
@@ -840,7 +931,11 @@ void nmi_exception_handler(struct pt_regs *regs)
 	while(1) ;
 }
 
+#define VECTORSPACING 0x100	/* for EI/VI mode */
+
+unsigned long ebase;
 unsigned long exception_handlers[32];
+unsigned long vi_handlers[64];
 
 /*
  * As a side effect of the way this is implemented we're limited
@@ -854,13 +949,156 @@ void *set_except_vector(int n, void *addr)
 
 	exception_handlers[n] = handler;
 	if (n == 0 && cpu_has_divec) {
-		*(volatile u32 *)(CAC_BASE + 0x200) = 0x08000000 |
+		*(volatile u32 *)(ebase + 0x200) = 0x08000000 |
 		                                 (0x03ffffff & (handler >> 2));
-		flush_icache_range(CAC_BASE + 0x200, CAC_BASE + 0x204);
+		flush_icache_range(ebase + 0x200, ebase + 0x204);
 	}
 	return (void *)old_handler;
 }
 
+#ifdef CONFIG_CPU_MIPSR2
+/*
+ * Shadow register allocation
+ * FIXME: SMP...
+ */
+
+/* MIPSR2 shadow register sets */
+struct shadow_registers {
+	spinlock_t sr_lock;	/*  */
+	int sr_supported;	/* Number of shadow register sets supported */
+	int sr_allocated;	/* Bitmap of allocated shadow registers */
+} shadow_registers;
+
+void mips_srs_init(void)
+{
+#ifdef CONFIG_CPU_MIPSR2_SRS
+	shadow_registers.sr_supported = ((read_c0_srsctl() >> 26) & 0x0f) + 1;
+	printk ("%d MIPSR2 register sets available\n", shadow_registers.sr_supported);
+#else
+	shadow_registers.sr_supported = 1;
+#endif
+	shadow_registers.sr_allocated = 1;	/* Set 0 used by kernel */
+	spin_lock_init(&shadow_registers.sr_lock);
+}
+
+int mips_srs_max(void)
+{
+	return shadow_registers.sr_supported;
+}
+
+int mips_srs_alloc (void)
+{
+	struct shadow_registers *sr = &shadow_registers;
+	unsigned long flags;
+	int set;
+
+	spin_lock_irqsave(&sr->sr_lock, flags);
+
+	for (set = 0; set < sr->sr_supported; set++) {
+		if ((sr->sr_allocated & (1 << set)) == 0) {
+			sr->sr_allocated |= 1 << set;
+			spin_unlock_irqrestore(&sr->sr_lock, flags);
+			return set;
+		}
+	}
+
+	/* None available */
+	spin_unlock_irqrestore(&sr->sr_lock, flags);
+	return -1;
+}
+
+void mips_srs_free (int set)
+{
+	struct shadow_registers *sr = &shadow_registers;
+	unsigned long flags;
+
+	spin_lock_irqsave(&sr->sr_lock, flags);
+	sr->sr_allocated &= ~(1 << set);
+	spin_unlock_irqrestore(&sr->sr_lock, flags);
+}
+
+void *set_vi_srs_handler (int n, void *addr, int srs)
+{
+	unsigned long handler;
+	unsigned long old_handler = vi_handlers[n];
+	u32 *w;
+	unsigned char *b;
+
+	if (!cpu_has_veic && !cpu_has_vint)
+		BUG();
+
+	if (addr == NULL) {
+		handler = (unsigned long) do_default_vi;
+		srs = 0;
+	}
+	else
+		handler = (unsigned long) addr;
+	vi_handlers[n] = (unsigned long) addr;
+
+	b = (unsigned char *)(ebase + 0x200 + n*VECTORSPACING);
+
+	if (srs >= mips_srs_max())
+		panic("Shadow register set %d not supported", srs);
+
+	if (cpu_has_veic) {
+		if (board_bind_eic_interrupt)
+			board_bind_eic_interrupt (n, srs);
+	}
+	else if (cpu_has_vint) {
+		/* SRSMap is only defined if shadow sets are implemented */
+		if (mips_srs_max() > 1)
+			change_c0_srsmap (0xf << n*4, srs << n*4);
+	}
+
+	if (srs == 0) {
+		/*
+		 * If no shadow set is selected then use the default handler
+		 * that does normal register saving and a standard interrupt exit
+		 */
+
+		extern char except_vec_vi, except_vec_vi_lui;
+		extern char except_vec_vi_ori, except_vec_vi_end;
+		const int handler_len = &except_vec_vi_end - &except_vec_vi;
+		const int lui_offset = &except_vec_vi_lui - &except_vec_vi;
+		const int ori_offset = &except_vec_vi_ori - &except_vec_vi;
+
+		if (handler_len > VECTORSPACING) {
+			/*
+			 * Sigh... panicing won't help as the console
+			 * is probably not configured :(
+			 */
+			panic ("VECTORSPACING too small");
+		}
+
+		memcpy (b, &except_vec_vi, handler_len);
+		w = (u32 *)(b + lui_offset);
+		*w = (*w & 0xffff0000) | (((u32)handler >> 16) & 0xffff);
+		w = (u32 *)(b + ori_offset);
+		*w = (*w & 0xffff0000) | ((u32)handler & 0xffff);
+		flush_icache_range((unsigned long)b, (unsigned long)(b+handler_len));
+	}
+	else {
+		/*
+		 * In other cases jump directly to the interrupt handler
+		 *
+		 * It is the handlers responsibility to save registers if required
+		 * (eg hi/lo) and return from the exception using "eret"
+		 */
+		w = (u32 *)b;
+		*w++ = 0x08000000 | (((u32)handler >> 2) & 0x03fffff); /* j handler */
+		*w = 0;
+		flush_icache_range((unsigned long)b, (unsigned long)(b+8));
+	}
+
+	return (void *)old_handler;
+}
+
+void *set_vi_handler (int n, void *addr)
+{
+	return set_vi_srs_handler (n, addr, 0);
+}
+#endif
+
 /*
  * This is used by native signal handling
  */
@@ -912,6 +1150,7 @@ static inline void signal32_init(void)
 
 extern void cpu_cache_init(void);
 extern void tlb_init(void);
+extern void flush_tlb_handlers(void);
 
 void __init per_cpu_trap_init(void)
 {
@@ -929,15 +1168,32 @@ void __init per_cpu_trap_init(void)
 #endif
 	if (current_cpu_data.isa_level == MIPS_CPU_ISA_IV)
 		status_set |= ST0_XX;
-	change_c0_status(ST0_CU|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX,
+	change_c0_status(ST0_CU|ST0_MX|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX,
 			 status_set);
 
+	if (cpu_has_dsp)
+		set_c0_status(ST0_MX);
+
+#ifdef CONFIG_CPU_MIPSR2
+	write_c0_hwrena (0x0000000f); /* Allow rdhwr to all registers */
+#endif
+
 	/*
-	 * Some MIPS CPUs have a dedicated interrupt vector which reduces the
-	 * interrupt processing overhead.  Use it where available.
+	 * Interrupt handling.
 	 */
-	if (cpu_has_divec)
-		set_c0_cause(CAUSEF_IV);
+	if (cpu_has_veic || cpu_has_vint) {
+		write_c0_ebase (ebase);
+		/* Setting vector spacing enables EI/VI mode  */
+		change_c0_intctl (0x3e0, VECTORSPACING);
+	}
+	if (cpu_has_divec) {
+		if (cpu_has_mipsmt) {
+			unsigned int vpflags = dvpe();
+			set_c0_cause(CAUSEF_IV);
+			evpe(vpflags);
+		} else
+			set_c0_cause(CAUSEF_IV);
+	}
 
 	cpu_data[cpu].asid_cache = ASID_FIRST_VERSION;
 	TLBMISS_HANDLER_SETUP();
@@ -951,13 +1207,41 @@ void __init per_cpu_trap_init(void)
 	tlb_init();
 }
 
+/* Install CPU exception handler */
+void __init set_handler (unsigned long offset, void *addr, unsigned long size)
+{
+	memcpy((void *)(ebase + offset), addr, size);
+	flush_icache_range(ebase + offset, ebase + offset + size);
+}
+
+/* Install uncached CPU exception handler */
+void __init set_uncached_handler (unsigned long offset, void *addr, unsigned long size)
+{
+#ifdef CONFIG_32BIT
+	unsigned long uncached_ebase = KSEG1ADDR(ebase);
+#endif
+#ifdef CONFIG_64BIT
+	unsigned long uncached_ebase = TO_UNCAC(ebase);
+#endif
+
+	memcpy((void *)(uncached_ebase + offset), addr, size);
+}
+
 void __init trap_init(void)
 {
 	extern char except_vec3_generic, except_vec3_r4000;
-	extern char except_vec_ejtag_debug;
 	extern char except_vec4;
 	unsigned long i;
 
+	if (cpu_has_veic || cpu_has_vint)
+		ebase = (unsigned long) alloc_bootmem_low_pages (0x200 + VECTORSPACING*64);
+	else
+		ebase = CAC_BASE;
+
+#ifdef CONFIG_CPU_MIPSR2
+	mips_srs_init();
+#endif
+
 	per_cpu_trap_init();
 
 	/*
@@ -965,7 +1249,7 @@ void __init trap_init(void)
 	 * This will be overriden later as suitable for a particular
 	 * configuration.
 	 */
-	memcpy((void *)(CAC_BASE + 0x180), &except_vec3_generic, 0x80);
+	set_handler(0x180, &except_vec3_generic, 0x80);
 
 	/*
 	 * Setup default vectors
@@ -977,8 +1261,8 @@ void __init trap_init(void)
 	 * Copy the EJTAG debug exception vector handler code to it's final
 	 * destination.
 	 */
-	if (cpu_has_ejtag)
-		memcpy((void *)(CAC_BASE + 0x300), &except_vec_ejtag_debug, 0x80);
+	if (cpu_has_ejtag && board_ejtag_handler_setup)
+		board_ejtag_handler_setup ();
 
 	/*
 	 * Only some CPUs have the watch exceptions.
@@ -987,11 +1271,15 @@ void __init trap_init(void)
 		set_except_vector(23, handle_watch);
 
 	/*
-	 * Some MIPS CPUs have a dedicated interrupt vector which reduces the
-	 * interrupt processing overhead.  Use it where available.
+	 * Initialise interrupt handlers
 	 */
-	if (cpu_has_divec)
-		memcpy((void *)(CAC_BASE + 0x200), &except_vec4, 0x8);
+	if (cpu_has_veic || cpu_has_vint) {
+		int nvec = cpu_has_veic ? 64 : 8;
+		for (i = 0; i < nvec; i++)
+			set_vi_handler (i, NULL);
+	}
+	else if (cpu_has_divec)
+		set_handler(0x200, &except_vec4, 0x8);
 
 	/*
 	 * Some CPUs can enable/disable for cache parity detection, but does
@@ -1023,21 +1311,6 @@ void __init trap_init(void)
 	set_except_vector(11, handle_cpu);
 	set_except_vector(12, handle_ov);
 	set_except_vector(13, handle_tr);
-	set_except_vector(22, handle_mdmx);
-
-	if (cpu_has_fpu && !cpu_has_nofpuex)
-		set_except_vector(15, handle_fpe);
-
-	if (cpu_has_mcheck)
-		set_except_vector(24, handle_mcheck);
-
-	if (cpu_has_vce)
-		/* Special exception: R4[04]00 uses also the divec space. */
-		memcpy((void *)(CAC_BASE + 0x180), &except_vec3_r4000, 0x100);
-	else if (cpu_has_4kex)
-		memcpy((void *)(CAC_BASE + 0x180), &except_vec3_generic, 0x80);
-	else
-		memcpy((void *)(CAC_BASE + 0x080), &except_vec3_generic, 0x80);
 
 	if (current_cpu_data.cputype == CPU_R6000 ||
 	    current_cpu_data.cputype == CPU_R6000A) {
@@ -1053,10 +1326,37 @@ void __init trap_init(void)
 		//set_except_vector(15, handle_ndc);
 	}
 
+
+	if (board_nmi_handler_setup)
+		board_nmi_handler_setup();
+
+	if (cpu_has_fpu && !cpu_has_nofpuex)
+		set_except_vector(15, handle_fpe);
+
+	set_except_vector(22, handle_mdmx);
+
+	if (cpu_has_mcheck)
+		set_except_vector(24, handle_mcheck);
+
+	if (cpu_has_mipsmt)
+		set_except_vector(25, handle_mt);
+
+	if (cpu_has_dsp)
+		set_except_vector(26, handle_dsp);
+
+	if (cpu_has_vce)
+		/* Special exception: R4[04]00 uses also the divec space. */
+		memcpy((void *)(CAC_BASE + 0x180), &except_vec3_r4000, 0x100);
+	else if (cpu_has_4kex)
+		memcpy((void *)(CAC_BASE + 0x180), &except_vec3_generic, 0x80);
+	else
+		memcpy((void *)(CAC_BASE + 0x080), &except_vec3_generic, 0x80);
+
 	signal_init();
 #ifdef CONFIG_MIPS32_COMPAT
 	signal32_init();
 #endif
 
-	flush_icache_range(CAC_BASE, CAC_BASE + 0x400);
+	flush_icache_range(ebase, ebase + 0x400);
+	flush_tlb_handlers();
 }
diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c
index 36c5212e0928..5b5a3736cbbc 100644
--- a/arch/mips/kernel/unaligned.c
+++ b/arch/mips/kernel/unaligned.c
@@ -94,7 +94,7 @@ unsigned long unaligned_instructions;
 #endif
 
 static inline int emulate_load_store_insn(struct pt_regs *regs,
-	void *addr, unsigned long pc,
+	void __user *addr, unsigned int __user *pc,
 	unsigned long **regptr, unsigned long *newvalue)
 {
 	union mips_instruction insn;
@@ -107,7 +107,7 @@ static inline int emulate_load_store_insn(struct pt_regs *regs,
 	/*
 	 * This load never faults.
 	 */
-	__get_user(insn.word, (unsigned int *)pc);
+	__get_user(insn.word, pc);
 
 	switch (insn.i_format.opcode) {
 	/*
@@ -494,8 +494,8 @@ asmlinkage void do_ade(struct pt_regs *regs)
 {
 	unsigned long *regptr, newval;
 	extern int do_dsemulret(struct pt_regs *);
+	unsigned int __user *pc;
 	mm_segment_t seg;
-	unsigned long pc;
 
 	/*
 	 * Address errors may be deliberately induced by the FPU emulator to
@@ -515,7 +515,7 @@ asmlinkage void do_ade(struct pt_regs *regs)
 	if ((regs->cp0_badvaddr == regs->cp0_epc) || (regs->cp0_epc & 0x1))
 		goto sigbus;
 
-	pc = exception_epc(regs);
+	pc = (unsigned int __user *) exception_epc(regs);
 	if ((current->thread.mflags & MF_FIXADE) == 0)
 		goto sigbus;
 
@@ -526,7 +526,7 @@ asmlinkage void do_ade(struct pt_regs *regs)
 	seg = get_fs();
 	if (!user_mode(regs))
 		set_fs(KERNEL_DS);
-	if (!emulate_load_store_insn(regs, (void *)regs->cp0_badvaddr, pc,
+	if (!emulate_load_store_insn(regs, (void __user *)regs->cp0_badvaddr, pc,
 	                             &regptr, &newval)) {
 		compute_return_epc(regs);
 		/*
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index 482ac310c937..25cc856d8e7e 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -54,13 +54,6 @@ SECTIONS
 
     *(.data)
 
-   /* Align the initial ramdisk image (INITRD) on page boundaries. */
-   . = ALIGN(4096);
-   __rd_start = .;
-   *(.initrd)
-   . = ALIGN(4096);
-   __rd_end = .;
-
     CONSTRUCTORS
   }
   _gp = . + 0x8000;
@@ -96,12 +89,6 @@ SECTIONS
   .init.setup : { *(.init.setup) }
   __setup_end = .;
 
-  .early_initcall.init : {
-  __earlyinitcall_start = .;
-	*(.initcall.early1.init)
-  }
-  __earlyinitcall_end = .;
-
   __initcall_start = .;
   .initcall.init : {
 	*(.initcall1.init)
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
new file mode 100644
index 000000000000..06be405be399
--- /dev/null
+++ b/arch/mips/kernel/vpe.c
@@ -0,0 +1,1284 @@
+/*
+ * Copyright (C) 2004, 2005 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+
+/*
+ * VPE support module
+ *
+ * Provides support for loading a MIPS SP program on VPE1.
+ * The SP enviroment is rather simple, no tlb's.  It needs to be relocatable
+ * (or partially linked). You should initialise your stack in the startup
+ * code. This loader looks for the symbol __start and sets up
+ * execution to resume from there. The MIPS SDE kit contains suitable examples.
+ *
+ * To load and run, simply cat a SP 'program file' to /dev/vpe1.
+ * i.e cat spapp >/dev/vpe1.
+ *
+ * You'll need to have the following device files.
+ * mknod /dev/vpe0 c 63 0
+ * mknod /dev/vpe1 c 63 1
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/vmalloc.h>
+#include <linux/elf.h>
+#include <linux/seq_file.h>
+#include <linux/syscalls.h>
+#include <linux/moduleloader.h>
+#include <linux/interrupt.h>
+#include <linux/poll.h>
+#include <linux/bootmem.h>
+#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
+#include <asm/cacheflush.h>
+#include <asm/atomic.h>
+#include <asm/cpu.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+
+typedef void *vpe_handle;
+
+#ifndef ARCH_SHF_SMALL
+#define ARCH_SHF_SMALL 0
+#endif
+
+/* If this is set, the section belongs in the init part of the module */
+#define INIT_OFFSET_MASK (1UL << (BITS_PER_LONG-1))
+
+static char module_name[] = "vpe";
+static int major;
+
+/* grab the likely amount of memory we will need. */
+#ifdef CONFIG_MIPS_VPE_LOADER_TOM
+#define P_SIZE (2 * 1024 * 1024)
+#else
+/* add an overhead to the max kmalloc size for non-striped symbols/etc */
+#define P_SIZE (256 * 1024)
+#endif
+
+#define MAX_VPES 16
+
+enum vpe_state {
+	VPE_STATE_UNUSED = 0,
+	VPE_STATE_INUSE,
+	VPE_STATE_RUNNING
+};
+
+enum tc_state {
+	TC_STATE_UNUSED = 0,
+	TC_STATE_INUSE,
+	TC_STATE_RUNNING,
+	TC_STATE_DYNAMIC
+};
+
+struct vpe {
+	enum vpe_state state;
+
+	/* (device) minor associated with this vpe */
+	int minor;
+
+	/* elfloader stuff */
+	void *load_addr;
+	u32 len;
+	char *pbuffer;
+	u32 plen;
+
+	unsigned long __start;
+
+	/* tc's associated with this vpe */
+	struct list_head tc;
+
+	/* The list of vpe's */
+	struct list_head list;
+
+	/* shared symbol address */
+	void *shared_ptr;
+};
+
+struct tc {
+	enum tc_state state;
+	int index;
+
+	/* parent VPE */
+	struct vpe *pvpe;
+
+	/* The list of TC's with this VPE */
+	struct list_head tc;
+
+	/* The global list of tc's */
+	struct list_head list;
+};
+
+struct vpecontrol_ {
+	/* Virtual processing elements */
+	struct list_head vpe_list;
+
+	/* Thread contexts */
+	struct list_head tc_list;
+} vpecontrol;
+
+static void release_progmem(void *ptr);
+static void dump_vpe(struct vpe * v);
+extern void save_gp_address(unsigned int secbase, unsigned int rel);
+
+/* get the vpe associated with this minor */
+struct vpe *get_vpe(int minor)
+{
+	struct vpe *v;
+
+	list_for_each_entry(v, &vpecontrol.vpe_list, list) {
+		if (v->minor == minor)
+			return v;
+	}
+
+	printk(KERN_DEBUG "VPE: get_vpe minor %d not found\n", minor);
+	return NULL;
+}
+
+/* get the vpe associated with this minor */
+struct tc *get_tc(int index)
+{
+	struct tc *t;
+
+	list_for_each_entry(t, &vpecontrol.tc_list, list) {
+		if (t->index == index)
+			return t;
+	}
+
+	printk(KERN_DEBUG "VPE: get_tc index %d not found\n", index);
+
+	return NULL;
+}
+
+struct tc *get_tc_unused(void)
+{
+	struct tc *t;
+
+	list_for_each_entry(t, &vpecontrol.tc_list, list) {
+		if (t->state == TC_STATE_UNUSED)
+			return t;
+	}
+
+	printk(KERN_DEBUG "VPE: All TC's are in use\n");
+
+	return NULL;
+}
+
+/* allocate a vpe and associate it with this minor (or index) */
+struct vpe *alloc_vpe(int minor)
+{
+	struct vpe *v;
+
+	if ((v = kzalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL) {
+		printk(KERN_WARNING "VPE: alloc_vpe no mem\n");
+		return NULL;
+	}
+
+	INIT_LIST_HEAD(&v->tc);
+	list_add_tail(&v->list, &vpecontrol.vpe_list);
+
+	v->minor = minor;
+	return v;
+}
+
+/* allocate a tc. At startup only tc0 is running, all other can be halted. */
+struct tc *alloc_tc(int index)
+{
+	struct tc *t;
+
+	if ((t = kzalloc(sizeof(struct tc), GFP_KERNEL)) == NULL) {
+		printk(KERN_WARNING "VPE: alloc_tc no mem\n");
+		return NULL;
+	}
+
+	INIT_LIST_HEAD(&t->tc);
+	list_add_tail(&t->list, &vpecontrol.tc_list);
+
+	t->index = index;
+
+	return t;
+}
+
+/* clean up and free everything */
+void release_vpe(struct vpe *v)
+{
+	list_del(&v->list);
+	if (v->load_addr)
+		release_progmem(v);
+	kfree(v);
+}
+
+void dump_mtregs(void)
+{
+	unsigned long val;
+
+	val = read_c0_config3();
+	printk("config3 0x%lx MT %ld\n", val,
+	       (val & CONFIG3_MT) >> CONFIG3_MT_SHIFT);
+
+	val = read_c0_mvpconf0();
+	printk("mvpconf0 0x%lx, PVPE %ld PTC %ld M %ld\n", val,
+	       (val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT,
+	       val & MVPCONF0_PTC, (val & MVPCONF0_M) >> MVPCONF0_M_SHIFT);
+
+	val = read_c0_mvpcontrol();
+	printk("MVPControl 0x%lx, STLB %ld VPC %ld EVP %ld\n", val,
+	       (val & MVPCONTROL_STLB) >> MVPCONTROL_STLB_SHIFT,
+	       (val & MVPCONTROL_VPC) >> MVPCONTROL_VPC_SHIFT,
+	       (val & MVPCONTROL_EVP));
+
+	val = read_c0_vpeconf0();
+	printk("VPEConf0 0x%lx MVP %ld\n", val,
+	       (val & VPECONF0_MVP) >> VPECONF0_MVP_SHIFT);
+}
+
+/* Find some VPE program space  */
+static void *alloc_progmem(u32 len)
+{
+#ifdef CONFIG_MIPS_VPE_LOADER_TOM
+	/* this means you must tell linux to use less memory than you physically have */
+	return (void *)((max_pfn * PAGE_SIZE) + KSEG0);
+#else
+	// simple grab some mem for now
+	return kmalloc(len, GFP_KERNEL);
+#endif
+}
+
+static void release_progmem(void *ptr)
+{
+#ifndef CONFIG_MIPS_VPE_LOADER_TOM
+	kfree(ptr);
+#endif
+}
+
+/* Update size with this section: return offset. */
+static long get_offset(unsigned long *size, Elf_Shdr * sechdr)
+{
+	long ret;
+
+	ret = ALIGN(*size, sechdr->sh_addralign ? : 1);
+	*size = ret + sechdr->sh_size;
+	return ret;
+}
+
+/* Lay out the SHF_ALLOC sections in a way not dissimilar to how ld
+   might -- code, read-only data, read-write data, small data.  Tally
+   sizes, and place the offsets into sh_entsize fields: high bit means it
+   belongs in init. */
+static void layout_sections(struct module *mod, const Elf_Ehdr * hdr,
+			    Elf_Shdr * sechdrs, const char *secstrings)
+{
+	static unsigned long const masks[][2] = {
+		/* NOTE: all executable code must be the first section
+		 * in this array; otherwise modify the text_size
+		 * finder in the two loops below */
+		{SHF_EXECINSTR | SHF_ALLOC, ARCH_SHF_SMALL},
+		{SHF_ALLOC, SHF_WRITE | ARCH_SHF_SMALL},
+		{SHF_WRITE | SHF_ALLOC, ARCH_SHF_SMALL},
+		{ARCH_SHF_SMALL | SHF_ALLOC, 0}
+	};
+	unsigned int m, i;
+
+	for (i = 0; i < hdr->e_shnum; i++)
+		sechdrs[i].sh_entsize = ~0UL;
+
+	for (m = 0; m < ARRAY_SIZE(masks); ++m) {
+		for (i = 0; i < hdr->e_shnum; ++i) {
+			Elf_Shdr *s = &sechdrs[i];
+
+			//  || strncmp(secstrings + s->sh_name, ".init", 5) == 0)
+			if ((s->sh_flags & masks[m][0]) != masks[m][0]
+			    || (s->sh_flags & masks[m][1])
+			    || s->sh_entsize != ~0UL)
+				continue;
+			s->sh_entsize = get_offset(&mod->core_size, s);
+		}
+
+		if (m == 0)
+			mod->core_text_size = mod->core_size;
+
+	}
+}
+
+
+/* from module-elf32.c, but subverted a little */
+
+struct mips_hi16 {
+	struct mips_hi16 *next;
+	Elf32_Addr *addr;
+	Elf32_Addr value;
+};
+
+static struct mips_hi16 *mips_hi16_list;
+static unsigned int gp_offs, gp_addr;
+
+static int apply_r_mips_none(struct module *me, uint32_t *location,
+			     Elf32_Addr v)
+{
+	return 0;
+}
+
+static int apply_r_mips_gprel16(struct module *me, uint32_t *location,
+				Elf32_Addr v)
+{
+	int rel;
+
+	if( !(*location & 0xffff) ) {
+		rel = (int)v - gp_addr;
+	}
+	else {
+		/* .sbss + gp(relative) + offset */
+		/* kludge! */
+		rel =  (int)(short)((int)v + gp_offs +
+				    (int)(short)(*location & 0xffff) - gp_addr);
+	}
+
+	if( (rel > 32768) || (rel < -32768) ) {
+		printk(KERN_ERR
+		       "apply_r_mips_gprel16: relative address out of range 0x%x %d\n",
+		       rel, rel);
+		return -ENOEXEC;
+	}
+
+	*location = (*location & 0xffff0000) | (rel & 0xffff);
+
+	return 0;
+}
+
+static int apply_r_mips_pc16(struct module *me, uint32_t *location,
+			     Elf32_Addr v)
+{
+	int rel;
+	rel = (((unsigned int)v - (unsigned int)location));
+	rel >>= 2;		// because the offset is in _instructions_ not bytes.
+	rel -= 1;		// and one instruction less due to the branch delay slot.
+
+	if( (rel > 32768) || (rel < -32768) ) {
+		printk(KERN_ERR
+		       "apply_r_mips_pc16: relative address out of range 0x%x\n", rel);
+		return -ENOEXEC;
+	}
+
+	*location = (*location & 0xffff0000) | (rel & 0xffff);
+
+	return 0;
+}
+
+static int apply_r_mips_32(struct module *me, uint32_t *location,
+			   Elf32_Addr v)
+{
+	*location += v;
+
+	return 0;
+}
+
+static int apply_r_mips_26(struct module *me, uint32_t *location,
+			   Elf32_Addr v)
+{
+	if (v % 4) {
+		printk(KERN_ERR "module %s: dangerous relocation mod4\n", me->name);
+		return -ENOEXEC;
+	}
+
+/*
+ * Not desperately convinced this is a good check of an overflow condition
+ * anyway. But it gets in the way of handling undefined weak symbols which
+ * we want to set to zero.
+ * if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
+ * printk(KERN_ERR
+ * "module %s: relocation overflow\n",
+ * me->name);
+ * return -ENOEXEC;
+ * }
+ */
+
+	*location = (*location & ~0x03ffffff) |
+		((*location + (v >> 2)) & 0x03ffffff);
+	return 0;
+}
+
+static int apply_r_mips_hi16(struct module *me, uint32_t *location,
+			     Elf32_Addr v)
+{
+	struct mips_hi16 *n;
+
+	/*
+	 * We cannot relocate this one now because we don't know the value of
+	 * the carry we need to add.  Save the information, and let LO16 do the
+	 * actual relocation.
+	 */
+	n = kmalloc(sizeof *n, GFP_KERNEL);
+	if (!n)
+		return -ENOMEM;
+
+	n->addr = location;
+	n->value = v;
+	n->next = mips_hi16_list;
+	mips_hi16_list = n;
+
+	return 0;
+}
+
+static int apply_r_mips_lo16(struct module *me, uint32_t *location,
+			     Elf32_Addr v)
+{
+	unsigned long insnlo = *location;
+	Elf32_Addr val, vallo;
+
+	/* Sign extend the addend we extract from the lo insn.  */
+	vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
+
+	if (mips_hi16_list != NULL) {
+		struct mips_hi16 *l;
+
+		l = mips_hi16_list;
+		while (l != NULL) {
+			struct mips_hi16 *next;
+			unsigned long insn;
+
+			/*
+			 * The value for the HI16 had best be the same.
+			 */
+			if (v != l->value) {
+				printk("%d != %d\n", v, l->value);
+				goto out_danger;
+			}
+
+
+			/*
+			 * Do the HI16 relocation.  Note that we actually don't
+			 * need to know anything about the LO16 itself, except
+			 * where to find the low 16 bits of the addend needed
+			 * by the LO16.
+			 */
+			insn = *l->addr;
+			val = ((insn & 0xffff) << 16) + vallo;
+			val += v;
+
+			/*
+			 * Account for the sign extension that will happen in
+			 * the low bits.
+			 */
+			val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff;
+
+			insn = (insn & ~0xffff) | val;
+			*l->addr = insn;
+
+			next = l->next;
+			kfree(l);
+			l = next;
+		}
+
+		mips_hi16_list = NULL;
+	}
+
+	/*
+	 * Ok, we're done with the HI16 relocs.  Now deal with the LO16.
+	 */
+	val = v + vallo;
+	insnlo = (insnlo & ~0xffff) | (val & 0xffff);
+	*location = insnlo;
+
+	return 0;
+
+out_danger:
+	printk(KERN_ERR "module %s: dangerous " "relocation\n", me->name);
+
+	return -ENOEXEC;
+}
+
+static int (*reloc_handlers[]) (struct module *me, uint32_t *location,
+				Elf32_Addr v) = {
+	[R_MIPS_NONE]	= apply_r_mips_none,
+	[R_MIPS_32]	= apply_r_mips_32,
+	[R_MIPS_26]	= apply_r_mips_26,
+	[R_MIPS_HI16]	= apply_r_mips_hi16,
+	[R_MIPS_LO16]	= apply_r_mips_lo16,
+	[R_MIPS_GPREL16] = apply_r_mips_gprel16,
+	[R_MIPS_PC16] = apply_r_mips_pc16
+};
+
+
+int apply_relocations(Elf32_Shdr *sechdrs,
+		      const char *strtab,
+		      unsigned int symindex,
+		      unsigned int relsec,
+		      struct module *me)
+{
+	Elf32_Rel *rel = (void *) sechdrs[relsec].sh_addr;
+	Elf32_Sym *sym;
+	uint32_t *location;
+	unsigned int i;
+	Elf32_Addr v;
+	int res;
+
+	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+		Elf32_Word r_info = rel[i].r_info;
+
+		/* This is where to make the change */
+		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+			+ rel[i].r_offset;
+		/* This is the symbol it is referring to */
+		sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
+			+ ELF32_R_SYM(r_info);
+
+		if (!sym->st_value) {
+			printk(KERN_DEBUG "%s: undefined weak symbol %s\n",
+			       me->name, strtab + sym->st_name);
+			/* just print the warning, dont barf */
+		}
+
+		v = sym->st_value;
+
+		res = reloc_handlers[ELF32_R_TYPE(r_info)](me, location, v);
+		if( res ) {
+			printk(KERN_DEBUG
+			       "relocation error 0x%x sym refer <%s> value 0x%x "
+			       "type 0x%x r_info 0x%x\n",
+			       (unsigned int)location, strtab + sym->st_name, v,
+			       r_info, ELF32_R_TYPE(r_info));
+		}
+
+		if (res)
+			return res;
+	}
+
+	return 0;
+}
+
+void save_gp_address(unsigned int secbase, unsigned int rel)
+{
+	gp_addr = secbase + rel;
+	gp_offs = gp_addr - (secbase & 0xffff0000);
+}
+/* end module-elf32.c */
+
+
+
+/* Change all symbols so that sh_value encodes the pointer directly. */
+static int simplify_symbols(Elf_Shdr * sechdrs,
+			    unsigned int symindex,
+			    const char *strtab,
+			    const char *secstrings,
+			    unsigned int nsecs, struct module *mod)
+{
+	Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
+	unsigned long secbase, bssbase = 0;
+	unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
+	int ret = 0, size;
+
+	/* find the .bss section for COMMON symbols */
+	for (i = 0; i < nsecs; i++) {
+		if (strncmp(secstrings + sechdrs[i].sh_name, ".bss", 4) == 0)
+			bssbase = sechdrs[i].sh_addr;
+	}
+
+	for (i = 1; i < n; i++) {
+		switch (sym[i].st_shndx) {
+		case SHN_COMMON:
+			/* Allocate space for the symbol in the .bss section. st_value is currently size.
+			   We want it to have the address of the symbol. */
+
+			size = sym[i].st_value;
+			sym[i].st_value = bssbase;
+
+			bssbase += size;
+			break;
+
+		case SHN_ABS:
+			/* Don't need to do anything */
+			break;
+
+		case SHN_UNDEF:
+			/* ret = -ENOENT; */
+			break;
+
+		case SHN_MIPS_SCOMMON:
+
+			printk(KERN_DEBUG
+			       "simplify_symbols: ignoring SHN_MIPS_SCOMMON symbol <%s> st_shndx %d\n",
+			       strtab + sym[i].st_name, sym[i].st_shndx);
+
+			// .sbss section
+			break;
+
+		default:
+			secbase = sechdrs[sym[i].st_shndx].sh_addr;
+
+			if (strncmp(strtab + sym[i].st_name, "_gp", 3) == 0) {
+				save_gp_address(secbase, sym[i].st_value);
+			}
+
+			sym[i].st_value += secbase;
+			break;
+		}
+
+	}
+
+	return ret;
+}
+
+#ifdef DEBUG_ELFLOADER
+static void dump_elfsymbols(Elf_Shdr * sechdrs, unsigned int symindex,
+			    const char *strtab, struct module *mod)
+{
+	Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
+	unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
+
+	printk(KERN_DEBUG "dump_elfsymbols: n %d\n", n);
+	for (i = 1; i < n; i++) {
+		printk(KERN_DEBUG " i %d name <%s> 0x%x\n", i,
+		       strtab + sym[i].st_name, sym[i].st_value);
+	}
+}
+#endif
+
+static void dump_tc(struct tc *t)
+{
+	printk(KERN_WARNING "VPE: TC index %d TCStatus 0x%lx halt 0x%lx\n",
+	       t->index, read_tc_c0_tcstatus(), read_tc_c0_tchalt());
+	printk(KERN_WARNING "VPE: tcrestart 0x%lx\n", read_tc_c0_tcrestart());
+}
+
+static void dump_tclist(void)
+{
+	struct tc *t;
+
+	list_for_each_entry(t, &vpecontrol.tc_list, list) {
+		dump_tc(t);
+	}
+}
+
+/* We are prepared so configure and start the VPE... */
+int vpe_run(struct vpe * v)
+{
+	unsigned long val;
+	struct tc *t;
+
+	/* check we are the Master VPE */
+	val = read_c0_vpeconf0();
+	if (!(val & VPECONF0_MVP)) {
+		printk(KERN_WARNING
+		       "VPE: only Master VPE's are allowed to configure MT\n");
+		return -1;
+	}
+
+	/* disable MT (using dvpe) */
+	dvpe();
+
+	/* Put MVPE's into 'configuration state' */
+	set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+	if (!list_empty(&v->tc)) {
+		if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) {
+			printk(KERN_WARNING "VPE: TC %d is already in use.\n",
+			       t->index);
+			return -ENOEXEC;
+		}
+	} else {
+		printk(KERN_WARNING "VPE: No TC's associated with VPE %d\n",
+		       v->minor);
+		return -ENOEXEC;
+	}
+
+	settc(t->index);
+
+	val = read_vpe_c0_vpeconf0();
+
+	/* should check it is halted, and not activated */
+	if ((read_tc_c0_tcstatus() & TCSTATUS_A) || !(read_tc_c0_tchalt() & TCHALT_H)) {
+		printk(KERN_WARNING "VPE: TC %d is already doing something!\n",
+		       t->index);
+
+		dump_tclist();
+		return -ENOEXEC;
+	}
+
+	/* Write the address we want it to start running from in the TCPC register. */
+	write_tc_c0_tcrestart((unsigned long)v->__start);
+
+	/* write the sivc_info address to tccontext */
+	write_tc_c0_tccontext((unsigned long)0);
+
+	/* Set up the XTC bit in vpeconf0 to point at our tc */
+	write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | (t->index << VPECONF0_XTC_SHIFT));
+
+	/* mark the TC as activated, not interrupt exempt and not dynamically allocatable */
+	val = read_tc_c0_tcstatus();
+	val = (val & ~(TCSTATUS_DA | TCSTATUS_IXMT)) | TCSTATUS_A;
+	write_tc_c0_tcstatus(val);
+
+	write_tc_c0_tchalt(read_tc_c0_tchalt() & ~TCHALT_H);
+
+	/* set up VPE1 */
+	write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE);	// no multiple TC's
+	write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA);	// enable this VPE
+
+	/*
+	 * The sde-kit passes 'memsize' to __start in $a3, so set something
+	 * here...
+	 * Or set $a3 (register 7) to zero and define DFLT_STACK_SIZE and
+	 * DFLT_HEAP_SIZE when you compile your program
+	 */
+
+	mttgpr(7, 0);
+
+	/* set config to be the same as vpe0, particularly kseg0 coherency alg */
+	write_vpe_c0_config(read_c0_config());
+
+	/* clear out any left overs from a previous program */
+	write_vpe_c0_cause(0);
+
+	/* take system out of configuration state */
+	clear_c0_mvpcontrol(MVPCONTROL_VPC);
+
+	/* clear interrupts enabled IE, ERL, EXL, and KSU from c0 status */
+	write_vpe_c0_status(read_vpe_c0_status() & ~(ST0_ERL | ST0_KSU | ST0_IE | ST0_EXL));
+
+	/* set it running */
+	evpe(EVPE_ENABLE);
+
+	return 0;
+}
+
+static unsigned long find_vpe_symbols(struct vpe * v, Elf_Shdr * sechdrs,
+				      unsigned int symindex, const char *strtab,
+				      struct module *mod)
+{
+	Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
+	unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
+
+	for (i = 1; i < n; i++) {
+		if (strcmp(strtab + sym[i].st_name, "__start") == 0) {
+			v->__start = sym[i].st_value;
+		}
+
+		if (strcmp(strtab + sym[i].st_name, "vpe_shared") == 0) {
+			v->shared_ptr = (void *)sym[i].st_value;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Allocates a VPE with some program code space(the load address), copies
+ * the contents of the program (p)buffer performing relocatations/etc,
+ * free's it when finished.
+*/
+int vpe_elfload(struct vpe * v)
+{
+	Elf_Ehdr *hdr;
+	Elf_Shdr *sechdrs;
+	long err = 0;
+	char *secstrings, *strtab = NULL;
+	unsigned int len, i, symindex = 0, strindex = 0;
+
+	struct module mod;	// so we can re-use the relocations code
+
+	memset(&mod, 0, sizeof(struct module));
+	strcpy(mod.name, "VPE dummy prog module");
+
+	hdr = (Elf_Ehdr *) v->pbuffer;
+	len = v->plen;
+
+	/* Sanity checks against insmoding binaries or wrong arch,
+	   weird elf version */
+	if (memcmp(hdr->e_ident, ELFMAG, 4) != 0
+	    || hdr->e_type != ET_REL || !elf_check_arch(hdr)
+	    || hdr->e_shentsize != sizeof(*sechdrs)) {
+		printk(KERN_WARNING
+		       "VPE program, wrong arch or weird elf version\n");
+
+		return -ENOEXEC;
+	}
+
+	if (len < hdr->e_shoff + hdr->e_shnum * sizeof(Elf_Shdr)) {
+		printk(KERN_ERR "VPE program length %u truncated\n", len);
+		return -ENOEXEC;
+	}
+
+	/* Convenience variables */
+	sechdrs = (void *)hdr + hdr->e_shoff;
+	secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
+	sechdrs[0].sh_addr = 0;
+
+	/* And these should exist, but gcc whinges if we don't init them */
+	symindex = strindex = 0;
+
+	for (i = 1; i < hdr->e_shnum; i++) {
+
+		if (sechdrs[i].sh_type != SHT_NOBITS
+		    && len < sechdrs[i].sh_offset + sechdrs[i].sh_size) {
+			printk(KERN_ERR "VPE program length %u truncated\n",
+			       len);
+			return -ENOEXEC;
+		}
+
+		/* Mark all sections sh_addr with their address in the
+		   temporary image. */
+		sechdrs[i].sh_addr = (size_t) hdr + sechdrs[i].sh_offset;
+
+		/* Internal symbols and strings. */
+		if (sechdrs[i].sh_type == SHT_SYMTAB) {
+			symindex = i;
+			strindex = sechdrs[i].sh_link;
+			strtab = (char *)hdr + sechdrs[strindex].sh_offset;
+		}
+	}
+
+	layout_sections(&mod, hdr, sechdrs, secstrings);
+
+	v->load_addr = alloc_progmem(mod.core_size);
+	memset(v->load_addr, 0, mod.core_size);
+
+	printk("VPE elf_loader: loading to %p\n", v->load_addr);
+
+	for (i = 0; i < hdr->e_shnum; i++) {
+		void *dest;
+
+		if (!(sechdrs[i].sh_flags & SHF_ALLOC))
+			continue;
+
+		dest = v->load_addr + sechdrs[i].sh_entsize;
+
+		if (sechdrs[i].sh_type != SHT_NOBITS)
+			memcpy(dest, (void *)sechdrs[i].sh_addr,
+			       sechdrs[i].sh_size);
+		/* Update sh_addr to point to copy in image. */
+		sechdrs[i].sh_addr = (unsigned long)dest;
+	}
+
+	/* Fix up syms, so that st_value is a pointer to location. */
+	err =
+		simplify_symbols(sechdrs, symindex, strtab, secstrings,
+				 hdr->e_shnum, &mod);
+	if (err < 0) {
+		printk(KERN_WARNING "VPE: unable to simplify symbols\n");
+		goto cleanup;
+	}
+
+	/* Now do relocations. */
+	for (i = 1; i < hdr->e_shnum; i++) {
+		const char *strtab = (char *)sechdrs[strindex].sh_addr;
+		unsigned int info = sechdrs[i].sh_info;
+
+		/* Not a valid relocation section? */
+		if (info >= hdr->e_shnum)
+			continue;
+
+		/* Don't bother with non-allocated sections */
+		if (!(sechdrs[info].sh_flags & SHF_ALLOC))
+			continue;
+
+		if (sechdrs[i].sh_type == SHT_REL)
+			err =
+				apply_relocations(sechdrs, strtab, symindex, i, &mod);
+		else if (sechdrs[i].sh_type == SHT_RELA)
+			err = apply_relocate_add(sechdrs, strtab, symindex, i,
+						 &mod);
+		if (err < 0) {
+			printk(KERN_WARNING
+			       "vpe_elfload: error in relocations err %ld\n",
+			       err);
+			goto cleanup;
+		}
+	}
+
+	/* make sure it's physically written out */
+	flush_icache_range((unsigned long)v->load_addr,
+			   (unsigned long)v->load_addr + v->len);
+
+	if ((find_vpe_symbols(v, sechdrs, symindex, strtab, &mod)) < 0) {
+
+		printk(KERN_WARNING
+		       "VPE: program doesn't contain __start or vpe_shared symbols\n");
+		err = -ENOEXEC;
+	}
+
+	printk(" elf loaded\n");
+
+cleanup:
+	return err;
+}
+
+static void dump_vpe(struct vpe * v)
+{
+	struct tc *t;
+
+	printk(KERN_DEBUG "VPEControl 0x%lx\n", read_vpe_c0_vpecontrol());
+	printk(KERN_DEBUG "VPEConf0 0x%lx\n", read_vpe_c0_vpeconf0());
+
+	list_for_each_entry(t, &vpecontrol.tc_list, list) {
+		dump_tc(t);
+	}
+}
+
+/* checks for VPE is unused and gets ready to load program	 */
+static int vpe_open(struct inode *inode, struct file *filp)
+{
+	int minor;
+	struct vpe *v;
+
+	/* assume only 1 device at the mo. */
+	if ((minor = MINOR(inode->i_rdev)) != 1) {
+		printk(KERN_WARNING "VPE: only vpe1 is supported\n");
+		return -ENODEV;
+	}
+
+	if ((v = get_vpe(minor)) == NULL) {
+		printk(KERN_WARNING "VPE: unable to get vpe\n");
+		return -ENODEV;
+	}
+
+	if (v->state != VPE_STATE_UNUSED) {
+		unsigned long tmp;
+		struct tc *t;
+
+		printk(KERN_WARNING "VPE: device %d already in use\n", minor);
+
+		dvpe();
+		dump_vpe(v);
+
+		printk(KERN_WARNING "VPE: re-initialising %d\n", minor);
+
+		release_progmem(v->load_addr);
+
+		t = get_tc(minor);
+		settc(minor);
+		tmp = read_tc_c0_tcstatus();
+
+		/* mark not allocated and not dynamically allocatable */
+		tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
+		tmp |= TCSTATUS_IXMT;	/* interrupt exempt */
+		write_tc_c0_tcstatus(tmp);
+
+		write_tc_c0_tchalt(TCHALT_H);
+
+	}
+
+	// allocate it so when we get write ops we know it's expected.
+	v->state = VPE_STATE_INUSE;
+
+	/* this of-course trashes what was there before... */
+	v->pbuffer = vmalloc(P_SIZE);
+	v->plen = P_SIZE;
+	v->load_addr = NULL;
+	v->len = 0;
+
+	return 0;
+}
+
+static int vpe_release(struct inode *inode, struct file *filp)
+{
+	int minor, ret = 0;
+	struct vpe *v;
+	Elf_Ehdr *hdr;
+
+	minor = MINOR(inode->i_rdev);
+	if ((v = get_vpe(minor)) == NULL)
+		return -ENODEV;
+
+	// simple case of fire and forget, so tell the VPE to run...
+
+	hdr = (Elf_Ehdr *) v->pbuffer;
+	if (memcmp(hdr->e_ident, ELFMAG, 4) == 0) {
+		if (vpe_elfload(v) >= 0)
+			vpe_run(v);
+		else {
+			printk(KERN_WARNING "VPE: ELF load failed.\n");
+			ret = -ENOEXEC;
+		}
+	} else {
+		printk(KERN_WARNING "VPE: only elf files are supported\n");
+		ret = -ENOEXEC;
+	}
+
+	// cleanup any temp buffers
+	if (v->pbuffer)
+		vfree(v->pbuffer);
+	v->plen = 0;
+	return ret;
+}
+
+static ssize_t vpe_write(struct file *file, const char __user * buffer,
+			 size_t count, loff_t * ppos)
+{
+	int minor;
+	size_t ret = count;
+	struct vpe *v;
+
+	minor = MINOR(file->f_dentry->d_inode->i_rdev);
+	if ((v = get_vpe(minor)) == NULL)
+		return -ENODEV;
+
+	if (v->pbuffer == NULL) {
+		printk(KERN_ERR "vpe_write: no pbuffer\n");
+		return -ENOMEM;
+	}
+
+	if ((count + v->len) > v->plen) {
+		printk(KERN_WARNING
+		       "VPE Loader: elf size too big. Perhaps strip uneeded symbols\n");
+		return -ENOMEM;
+	}
+
+	count -= copy_from_user(v->pbuffer + v->len, buffer, count);
+	if (!count) {
+		printk("vpe_write: copy_to_user failed\n");
+		return -EFAULT;
+	}
+
+	v->len += count;
+	return ret;
+}
+
+static struct file_operations vpe_fops = {
+	.owner = THIS_MODULE,
+	.open = vpe_open,
+	.release = vpe_release,
+	.write = vpe_write
+};
+
+/* module wrapper entry points */
+/* give me a vpe */
+vpe_handle vpe_alloc(void)
+{
+	int i;
+	struct vpe *v;
+
+	/* find a vpe */
+	for (i = 1; i < MAX_VPES; i++) {
+		if ((v = get_vpe(i)) != NULL) {
+			v->state = VPE_STATE_INUSE;
+			return v;
+		}
+	}
+	return NULL;
+}
+
+EXPORT_SYMBOL(vpe_alloc);
+
+/* start running from here */
+int vpe_start(vpe_handle vpe, unsigned long start)
+{
+	struct vpe *v = vpe;
+
+	v->__start = start;
+	return vpe_run(v);
+}
+
+EXPORT_SYMBOL(vpe_start);
+
+/* halt it for now */
+int vpe_stop(vpe_handle vpe)
+{
+	struct vpe *v = vpe;
+	struct tc *t;
+	unsigned int evpe_flags;
+
+	evpe_flags = dvpe();
+
+	if ((t = list_entry(v->tc.next, struct tc, tc)) != NULL) {
+
+		settc(t->index);
+		write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA);
+	}
+
+	evpe(evpe_flags);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(vpe_stop);
+
+/* I've done with it thank you */
+int vpe_free(vpe_handle vpe)
+{
+	struct vpe *v = vpe;
+	struct tc *t;
+	unsigned int evpe_flags;
+
+	if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) {
+		return -ENOEXEC;
+	}
+
+	evpe_flags = dvpe();
+
+	/* Put MVPE's into 'configuration state' */
+	set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+	settc(t->index);
+	write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA);
+
+	/* mark the TC unallocated and halt'ed */
+	write_tc_c0_tcstatus(read_tc_c0_tcstatus() & ~TCSTATUS_A);
+	write_tc_c0_tchalt(TCHALT_H);
+
+	v->state = VPE_STATE_UNUSED;
+
+	clear_c0_mvpcontrol(MVPCONTROL_VPC);
+	evpe(evpe_flags);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(vpe_free);
+
+void *vpe_get_shared(int index)
+{
+	struct vpe *v;
+
+	if ((v = get_vpe(index)) == NULL) {
+		printk(KERN_WARNING "vpe: invalid vpe index %d\n", index);
+		return NULL;
+	}
+
+	return v->shared_ptr;
+}
+
+EXPORT_SYMBOL(vpe_get_shared);
+
+static int __init vpe_module_init(void)
+{
+	struct vpe *v = NULL;
+	struct tc *t;
+	unsigned long val;
+	int i;
+
+	if (!cpu_has_mipsmt) {
+		printk("VPE loader: not a MIPS MT capable processor\n");
+		return -ENODEV;
+	}
+
+	if ((major = register_chrdev(0, module_name, &vpe_fops) < 0)) {
+		printk("VPE loader: unable to register character device\n");
+		return major;
+	}
+
+	dmt();
+	dvpe();
+
+	/* Put MVPE's into 'configuration state' */
+	set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+	/* dump_mtregs(); */
+
+	INIT_LIST_HEAD(&vpecontrol.vpe_list);
+	INIT_LIST_HEAD(&vpecontrol.tc_list);
+
+	val = read_c0_mvpconf0();
+	for (i = 0; i < ((val & MVPCONF0_PTC) + 1); i++) {
+		t = alloc_tc(i);
+
+		/* VPE's */
+		if (i < ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1) {
+			settc(i);
+
+			if ((v = alloc_vpe(i)) == NULL) {
+				printk(KERN_WARNING "VPE: unable to allocate VPE\n");
+				return -ENODEV;
+			}
+
+			list_add(&t->tc, &v->tc);	/* add the tc to the list of this vpe's tc's. */
+
+			/* deactivate all but vpe0 */
+			if (i != 0) {
+				unsigned long tmp = read_vpe_c0_vpeconf0();
+
+				tmp &= ~VPECONF0_VPA;
+
+				/* master VPE */
+				tmp |= VPECONF0_MVP;
+				write_vpe_c0_vpeconf0(tmp);
+			}
+
+			/* disable multi-threading with TC's */
+			write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE);
+
+			if (i != 0) {
+				write_vpe_c0_status((read_c0_status() &
+						     ~(ST0_IM | ST0_IE | ST0_KSU))
+						    | ST0_CU0);
+
+				/* set config to be the same as vpe0, particularly kseg0 coherency alg */
+				write_vpe_c0_config(read_c0_config());
+			}
+
+		}
+
+		/* TC's */
+		t->pvpe = v;	/* set the parent vpe */
+
+		if (i != 0) {
+			unsigned long tmp;
+
+			/* tc 0 will of course be running.... */
+			if (i == 0)
+				t->state = TC_STATE_RUNNING;
+
+			settc(i);
+
+			/* bind a TC to each VPE, May as well put all excess TC's
+			   on the last VPE */
+			if (i >= (((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1))
+				write_tc_c0_tcbind(read_tc_c0_tcbind() |
+						   ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT));
+			else
+				write_tc_c0_tcbind(read_tc_c0_tcbind() | i);
+
+			tmp = read_tc_c0_tcstatus();
+
+			/* mark not allocated and not dynamically allocatable */
+			tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
+			tmp |= TCSTATUS_IXMT;	/* interrupt exempt */
+			write_tc_c0_tcstatus(tmp);
+
+			write_tc_c0_tchalt(TCHALT_H);
+		}
+	}
+
+	/* release config state */
+	clear_c0_mvpcontrol(MVPCONTROL_VPC);
+
+	return 0;
+}
+
+static void __exit vpe_module_exit(void)
+{
+	struct vpe *v, *n;
+
+	list_for_each_entry_safe(v, n, &vpecontrol.vpe_list, list) {
+		if (v->state != VPE_STATE_UNUSED) {
+			release_vpe(v);
+		}
+	}
+
+	unregister_chrdev(major, module_name);
+}
+
+module_init(vpe_module_init);
+module_exit(vpe_module_exit);
+MODULE_DESCRIPTION("MIPS VPE Loader");
+MODULE_AUTHOR("Elizabeth Clarke, MIPS Technologies, Inc");
+MODULE_LICENSE("GPL");
diff --git a/arch/mips/lasat/Kconfig b/arch/mips/lasat/Kconfig
new file mode 100644
index 000000000000..1d2ee8a9be13
--- /dev/null
+++ b/arch/mips/lasat/Kconfig
@@ -0,0 +1,15 @@
+config PICVUE
+	tristate "PICVUE LCD display driver"
+	depends on LASAT
+
+config PICVUE_PROC
+	tristate "PICVUE LCD display driver /proc interface"
+	depends on PICVUE
+
+config DS1603
+	bool "DS1603 RTC driver"
+	depends on LASAT
+
+config LASAT_SYSCTL
+	bool "LASAT sysctl interface"
+	depends on LASAT
diff --git a/arch/mips/lasat/ds1603.c b/arch/mips/lasat/ds1603.c
index 9d7812e03dcd..7dced67c55eb 100644
--- a/arch/mips/lasat/ds1603.c
+++ b/arch/mips/lasat/ds1603.c
@@ -8,6 +8,7 @@
 #include <asm/lasat/lasat.h>
 #include <linux/delay.h>
 #include <asm/lasat/ds1603.h>
+#include <asm/time.h>
 
 #include "ds1603.h"
 
@@ -138,19 +139,27 @@ static void rtc_end_op(void)
 unsigned long ds1603_read(void)
 {
 	unsigned long word;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rtc_lock, flags);
 	rtc_init_op();
 	rtc_write_byte(READ_TIME_CMD);
 	word = rtc_read_word();
 	rtc_end_op();
+	spin_unlock_irqrestore(&rtc_lock, flags);
 	return word;
 }
 
 int ds1603_set(unsigned long time)
 {
+	unsigned long flags;
+
+	spin_lock_irqsave(&rtc_lock, flags);
 	rtc_init_op();
 	rtc_write_byte(SET_TIME_CMD);
 	rtc_write_word(time);
 	rtc_end_op();
+	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	return 0;
 }
diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c
index c90da1639440..852a41901a5e 100644
--- a/arch/mips/lasat/interrupt.c
+++ b/arch/mips/lasat/interrupt.c
@@ -71,14 +71,13 @@ static void end_lasat_irq(unsigned int irq)
 }
 
 static struct hw_interrupt_type lasat_irq_type = {
-	"Lasat",
-	startup_lasat_irq,
-	shutdown_lasat_irq,
-	enable_lasat_irq,
-	disable_lasat_irq,
-	mask_and_ack_lasat_irq,
-	end_lasat_irq,
-	NULL
+	.typename = "Lasat",
+	.startup = startup_lasat_irq,
+	.shutdown = shutdown_lasat_irq,
+	.enable = enable_lasat_irq,
+	.disable = disable_lasat_irq,
+	.ack = mask_and_ack_lasat_irq,
+	.end = end_lasat_irq,
 };
 
 static inline int ls1bit32(unsigned int x)
diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c
index f2604fab9a99..dcd819d57dae 100644
--- a/arch/mips/lasat/setup.c
+++ b/arch/mips/lasat/setup.c
@@ -155,7 +155,7 @@ void __init serial_init(void)
 }
 #endif
 
-static int __init lasat_setup(void)
+void __init plat_setup(void)
 {
 	int i;
 	lasat_misc  = &lasat_misc_info[mips_machtype];
@@ -185,8 +185,4 @@ static int __init lasat_setup(void)
 	change_c0_status(ST0_BEV,0);
 
 	prom_printf("Lasat specific initialization complete\n");
-
-        return 0;
 }
-
-early_initcall(lasat_setup);
diff --git a/arch/mips/lib-32/dump_tlb.c b/arch/mips/lib-32/dump_tlb.c
index 019ac8f005d7..46519f4331eb 100644
--- a/arch/mips/lib-32/dump_tlb.c
+++ b/arch/mips/lib-32/dump_tlb.c
@@ -20,16 +20,25 @@
 static inline const char *msk2str(unsigned int mask)
 {
 	switch (mask) {
-	case PM_4K:	return "4kb";
-	case PM_16K:	return "16kb";
-	case PM_64K:	return "64kb";
-	case PM_256K:	return "256kb";
+	case PM_4K:
+		return "4kb";
+	case PM_16K:
+		return "16kb";
+	case PM_64K:
+		return "64kb";
+	case PM_256K:
+		return "256kb";
 #ifndef CONFIG_CPU_VR41XX
-	case PM_1M:	return "1Mb";
-	case PM_4M:	return "4Mb";
-	case PM_16M:	return "16Mb";
-	case PM_64M:	return "64Mb";
-	case PM_256M:	return "256Mb";
+	case PM_1M:
+		return "1Mb";
+	case PM_4M:
+		return "4Mb";
+	case PM_16M:
+		return "16Mb";
+	case PM_64M:
+		return "64Mb";
+	case PM_256M:
+		return "256Mb";
 #endif
 	}
 
@@ -47,7 +56,7 @@ void dump_tlb(int first, int last)
 	unsigned int pagemask, c0, c1, asid;
 	unsigned long long entrylo0, entrylo1;
 	unsigned long entryhi;
-	int	i;
+	int i;
 
 	asid = read_c0_entryhi() & 0xff;
 
@@ -58,7 +67,7 @@ void dump_tlb(int first, int last)
 		tlb_read();
 		BARRIER();
 		pagemask = read_c0_pagemask();
-		entryhi  = read_c0_entryhi();
+		entryhi = read_c0_entryhi();
 		entrylo0 = read_c0_entrylo0();
 		entrylo1 = read_c0_entrylo1();
 
@@ -78,13 +87,11 @@ void dump_tlb(int first, int last)
 			printk("\t\t\t[pa=%08Lx c=%d d=%d v=%d g=%Ld]\n",
 			       (entrylo0 << 6) & PAGE_MASK, c0,
 			       (entrylo0 & 4) ? 1 : 0,
-			       (entrylo0 & 2) ? 1 : 0,
-			       (entrylo0 & 1));
+			       (entrylo0 & 2) ? 1 : 0, (entrylo0 & 1));
 			printk("\t\t\t[pa=%08Lx c=%d d=%d v=%d g=%Ld]\n",
 			       (entrylo1 << 6) & PAGE_MASK, c1,
 			       (entrylo1 & 4) ? 1 : 0,
-			       (entrylo1 & 2) ? 1 : 0,
-			       (entrylo1 & 1));
+			       (entrylo1 & 2) ? 1 : 0, (entrylo1 & 1));
 			printk("\n");
 		}
 	}
@@ -99,7 +106,7 @@ void dump_tlb_all(void)
 
 void dump_tlb_wired(void)
 {
-	int	wired;
+	int wired;
 
 	wired = read_c0_wired();
 	printk("Wired: %d", wired);
@@ -138,9 +145,10 @@ void dump_tlb_nonwired(void)
 
 void dump_list_process(struct task_struct *t, void *address)
 {
-	pgd_t	*page_dir, *pgd;
-	pmd_t	*pmd;
-	pte_t	*pte, page;
+	pgd_t *page_dir, *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *pte, page;
 	unsigned long addr, val;
 
 	addr = (unsigned long) address;
@@ -152,21 +160,27 @@ void dump_list_process(struct task_struct *t, void *address)
 
 	if (addr > KSEG0)
 		page_dir = pgd_offset_k(0);
-	else
+	else if (t->mm) {
 		page_dir = pgd_offset(t->mm, 0);
-	printk("page_dir == %08x\n", (unsigned int) page_dir);
+		printk("page_dir == %08x\n", (unsigned int) page_dir);
+	} else
+		printk("Current thread has no mm\n");
 
 	if (addr > KSEG0)
 		pgd = pgd_offset_k(addr);
-	else
+	else if (t->mm) {
 		pgd = pgd_offset(t->mm, addr);
-	printk("pgd == %08x, ", (unsigned int) pgd);
+		printk("pgd == %08x, ", (unsigned int) pgd);
+		pud = pud_offset(pgd, addr);
+		printk("pud == %08x, ", (unsigned int) pud);
 
-	pmd = pmd_offset(pgd, addr);
-	printk("pmd == %08x, ", (unsigned int) pmd);
+		pmd = pmd_offset(pud, addr);
+		printk("pmd == %08x, ", (unsigned int) pmd);
 
-	pte = pte_offset(pmd, addr);
-	printk("pte == %08x, ", (unsigned int) pte);
+		pte = pte_offset(pmd, addr);
+		printk("pte == %08x, ", (unsigned int) pte);
+	} else
+		printk("Current thread has no mm\n");
 
 	page = *pte;
 #ifdef CONFIG_64BIT_PHYS_ADDR
@@ -176,14 +190,22 @@ void dump_list_process(struct task_struct *t, void *address)
 #endif
 
 	val = pte_val(page);
-	if (val & _PAGE_PRESENT) printk("present ");
-	if (val & _PAGE_READ) printk("read ");
-	if (val & _PAGE_WRITE) printk("write ");
-	if (val & _PAGE_ACCESSED) printk("accessed ");
-	if (val & _PAGE_MODIFIED) printk("modified ");
-	if (val & _PAGE_R4KBUG) printk("r4kbug ");
-	if (val & _PAGE_GLOBAL) printk("global ");
-	if (val & _PAGE_VALID) printk("valid ");
+	if (val & _PAGE_PRESENT)
+		printk("present ");
+	if (val & _PAGE_READ)
+		printk("read ");
+	if (val & _PAGE_WRITE)
+		printk("write ");
+	if (val & _PAGE_ACCESSED)
+		printk("accessed ");
+	if (val & _PAGE_MODIFIED)
+		printk("modified ");
+	if (val & _PAGE_R4KBUG)
+		printk("r4kbug ");
+	if (val & _PAGE_GLOBAL)
+		printk("global ");
+	if (val & _PAGE_VALID)
+		printk("valid ");
 	printk("\n");
 }
 
@@ -194,14 +216,16 @@ void dump_list_current(void *address)
 
 unsigned int vtop(void *address)
 {
-	pgd_t	*pgd;
-	pmd_t	*pmd;
-	pte_t	*pte;
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *pte;
 	unsigned int addr, paddr;
 
 	addr = (unsigned long) address;
 	pgd = pgd_offset(current->mm, addr);
-	pmd = pmd_offset(pgd, addr);
+	pud = pud_offset(pgd, addr);
+	pmd = pmd_offset(pud, addr);
 	pte = pte_offset(pmd, addr);
 	paddr = (KSEG1 | (unsigned int) pte_val(*pte)) & PAGE_MASK;
 	paddr |= (addr & ~PAGE_MASK);
@@ -214,9 +238,9 @@ void dump16(unsigned long *p)
 	int i;
 
 	for (i = 0; i < 8; i++) {
-		printk("*%08lx == %08lx, ", (unsigned long)p, *p);
+		printk("*%08lx == %08lx, ", (unsigned long) p, *p);
 		p++;
-		printk("*%08lx == %08lx\n", (unsigned long)p, *p);
+		printk("*%08lx == %08lx\n", (unsigned long) p, *p);
 		p++;
 	}
 }
diff --git a/arch/mips/lib-32/r3k_dump_tlb.c b/arch/mips/lib-32/r3k_dump_tlb.c
index a878224004e5..4f2cb74f0766 100644
--- a/arch/mips/lib-32/r3k_dump_tlb.c
+++ b/arch/mips/lib-32/r3k_dump_tlb.c
@@ -105,6 +105,7 @@ void dump_tlb_nonwired(void)
 void dump_list_process(struct task_struct *t, void *address)
 {
 	pgd_t	*page_dir, *pgd;
+	pud_t	*pud;
 	pmd_t	*pmd;
 	pte_t	*pte, page;
 	unsigned int addr;
@@ -121,7 +122,10 @@ void dump_list_process(struct task_struct *t, void *address)
 	pgd = pgd_offset(t->mm, addr);
 	printk("pgd == %08x, ", (unsigned int) pgd);
 
-	pmd = pmd_offset(pgd, addr);
+	pud = pud_offset(pgd, addr);
+	printk("pud == %08x, ", (unsigned int) pud);
+
+	pmd = pmd_offset(pud, addr);
 	printk("pmd == %08x, ", (unsigned int) pmd);
 
 	pte = pte_offset(pmd, addr);
@@ -149,13 +153,15 @@ void dump_list_current(void *address)
 unsigned int vtop(void *address)
 {
 	pgd_t	*pgd;
+	pud_t	*pud;
 	pmd_t	*pmd;
 	pte_t	*pte;
 	unsigned int addr, paddr;
 
 	addr = (unsigned long) address;
 	pgd = pgd_offset(current->mm, addr);
-	pmd = pmd_offset(pgd, addr);
+	pud = pud_offset(pgd, addr);
+	pmd = pmd_offset(pud, addr);
 	pte = pte_offset(pmd, addr);
 	paddr = (KSEG1 | (unsigned int) pte_val(*pte)) & PAGE_MASK;
 	paddr |= (addr & ~PAGE_MASK);
diff --git a/arch/mips/lib-64/dump_tlb.c b/arch/mips/lib-64/dump_tlb.c
index 42f88e055b4c..11a5f015f040 100644
--- a/arch/mips/lib-64/dump_tlb.c
+++ b/arch/mips/lib-64/dump_tlb.c
@@ -140,6 +140,7 @@ void dump_tlb_nonwired(void)
 void dump_list_process(struct task_struct *t, void *address)
 {
 	pgd_t	*page_dir, *pgd;
+	pud_t	*pud;
 	pmd_t	*pmd;
 	pte_t	*pte, page;
 	unsigned long addr, val;
@@ -155,7 +156,10 @@ void dump_list_process(struct task_struct *t, void *address)
 	pgd = pgd_offset(t->mm, addr);
 	printk("pgd == %016lx\n", (unsigned long) pgd);
 
-	pmd = pmd_offset(pgd, addr);
+	pud = pud_offset(pgd, addr);
+	printk("pud == %016lx\n", (unsigned long) pud);
+
+	pmd = pmd_offset(pud, addr);
 	printk("pmd == %016lx\n", (unsigned long) pmd);
 
 	pte = pte_offset(pmd, addr);
@@ -184,13 +188,15 @@ void dump_list_current(void *address)
 unsigned int vtop(void *address)
 {
 	pgd_t	*pgd;
+	pud_t	*pud;
 	pmd_t	*pmd;
 	pte_t	*pte;
 	unsigned int addr, paddr;
 
 	addr = (unsigned long) address;
 	pgd = pgd_offset(current->mm, addr);
-	pmd = pmd_offset(pgd, addr);
+	pud = pud_offset(pgd, addr);
+	pmd = pmd_offset(pud, addr);
 	pte = pte_offset(pmd, addr);
 	paddr = (CKSEG1 | (unsigned int) pte_val(*pte)) & PAGE_MASK;
 	paddr |= (addr & ~PAGE_MASK);
diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile
index 037303412909..cf12caf80774 100644
--- a/arch/mips/lib/Makefile
+++ b/arch/mips/lib/Makefile
@@ -2,8 +2,8 @@
 # Makefile for MIPS-specific library files..
 #
 
-lib-y	+= csum_partial_copy.o memcpy.o promlib.o \
-	   strlen_user.o strncpy_user.o strnlen_user.o
+lib-y	+= csum_partial_copy.o memcpy.o promlib.o strlen_user.o strncpy_user.o \
+	   strnlen_user.o uncached.o
 
 obj-y	+= iomap.o
 
diff --git a/arch/mips/lib/csum_partial_copy.c b/arch/mips/lib/csum_partial_copy.c
index ffed0a6a1c16..6e9f366f961d 100644
--- a/arch/mips/lib/csum_partial_copy.c
+++ b/arch/mips/lib/csum_partial_copy.c
@@ -16,8 +16,8 @@
 /*
  * copy while checksumming, otherwise like csum_partial
  */
-unsigned int csum_partial_copy_nocheck(const unsigned char *src, unsigned char *dst,
-	int len, unsigned int sum)
+unsigned int csum_partial_copy_nocheck(const unsigned char *src,
+	unsigned char *dst, int len, unsigned int sum)
 {
 	/*
 	 * It's 2:30 am and I don't feel like doing it real ...
@@ -33,8 +33,8 @@ unsigned int csum_partial_copy_nocheck(const unsigned char *src, unsigned char *
  * Copy from userspace and compute checksum.  If we catch an exception
  * then zero the rest of the buffer.
  */
-unsigned int csum_partial_copy_from_user (const unsigned char *src, unsigned char *dst,
-	int len, unsigned int sum, int *err_ptr)
+unsigned int csum_partial_copy_from_user (const unsigned char __user *src,
+	unsigned char *dst, int len, unsigned int sum, int *err_ptr)
 {
 	int missing;
 
diff --git a/arch/mips/lib/memcpy.S b/arch/mips/lib/memcpy.S
index a78865f76547..7f9aafa4d80e 100644
--- a/arch/mips/lib/memcpy.S
+++ b/arch/mips/lib/memcpy.S
@@ -13,6 +13,21 @@
  * Mnemonic names for arguments to memcpy/__copy_user
  */
 #include <linux/config.h>
+
+/*
+ * Hack to resolve longstanding prefetch issue
+ *
+ * Prefetching may be fatal on some systems if we're prefetching beyond the
+ * end of memory on some systems.  It's also a seriously bad idea on non
+ * dma-coherent systems.
+ */
+#if !defined(CONFIG_DMA_COHERENT) || !defined(CONFIG_DMA_IP27)
+#undef CONFIG_CPU_HAS_PREFETCH
+#endif
+#ifdef CONFIG_MIPS_MALTA
+#undef CONFIG_CPU_HAS_PREFETCH
+#endif
+
 #include <asm/asm.h>
 #include <asm/asm-offsets.h>
 #include <asm/regdef.h>
diff --git a/arch/mips/lib/uncached.c b/arch/mips/lib/uncached.c
new file mode 100644
index 000000000000..98ce89f8068b
--- /dev/null
+++ b/arch/mips/lib/uncached.c
@@ -0,0 +1,76 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Thiemo Seufer
+ * Copyright (C) 2005  MIPS Technologies, Inc.  All rights reserved.
+ *	Author: Maciej W. Rozycki <macro@mips.com>
+ */
+
+#include <linux/init.h>
+
+#include <asm/addrspace.h>
+#include <asm/bug.h>
+
+#ifndef CKSEG2
+#define CKSEG2 CKSSEG
+#endif
+#ifndef TO_PHYS_MASK
+#define TO_PHYS_MASK -1
+#endif
+
+/*
+ * FUNC is executed in one of the uncached segments, depending on its
+ * original address as follows:
+ *
+ * 1. If the original address is in CKSEG0 or CKSEG1, then the uncached
+ *    segment used is CKSEG1.
+ * 2. If the original address is in XKPHYS, then the uncached segment
+ *    used is XKPHYS(2).
+ * 3. Otherwise it's a bug.
+ *
+ * The same remapping is done with the stack pointer.  Stack handling
+ * works because we don't handle stack arguments or more complex return
+ * values, so we can avoid sharing the same stack area between a cached
+ * and the uncached mode.
+ */
+unsigned long __init run_uncached(void *func)
+{
+	register long sp __asm__("$sp");
+	register long ret __asm__("$2");
+	long lfunc = (long)func, ufunc;
+	long usp;
+
+	if (sp >= (long)CKSEG0 && sp < (long)CKSEG2)
+		usp = CKSEG1ADDR(sp);
+	else if ((long long)sp >= (long long)PHYS_TO_XKPHYS(0LL, 0) &&
+		 (long long)sp < (long long)PHYS_TO_XKPHYS(8LL, 0))
+		usp = PHYS_TO_XKPHYS((long long)K_CALG_UNCACHED,
+				     XKPHYS_TO_PHYS((long long)sp));
+	else {
+		BUG();
+		usp = sp;
+	}
+	if (lfunc >= (long)CKSEG0 && lfunc < (long)CKSEG2)
+		ufunc = CKSEG1ADDR(lfunc);
+	else if ((long long)lfunc >= (long long)PHYS_TO_XKPHYS(0LL, 0) &&
+		 (long long)lfunc < (long long)PHYS_TO_XKPHYS(8LL, 0))
+		ufunc = PHYS_TO_XKPHYS((long long)K_CALG_UNCACHED,
+				       XKPHYS_TO_PHYS((long long)lfunc));
+	else {
+		BUG();
+		ufunc = lfunc;
+	}
+
+	__asm__ __volatile__ (
+		"	move	$16, $sp\n"
+		"	move	$sp, %1\n"
+		"	jalr	%2\n"
+		"	move	$sp, $16"
+		: "=r" (ret)
+		: "r" (usp), "r" (ufunc)
+		: "$16", "$31");
+
+	return ret;
+}
diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c
index 99c550632d44..aa5818a0d884 100644
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -70,7 +70,7 @@ static int fpux_emu(struct pt_regs *,
 
 /* Further private data for which no space exists in mips_fpu_soft_struct */
 
-struct mips_fpu_emulator_private fpuemuprivate;
+struct mips_fpu_emulator_stats fpuemustats;
 
 /* Control registers */
 
@@ -79,7 +79,17 @@ struct mips_fpu_emulator_private fpuemuprivate;
 
 /* Convert Mips rounding mode (0..3) to IEEE library modes. */
 static const unsigned char ieee_rm[4] = {
-	IEEE754_RN, IEEE754_RZ, IEEE754_RU, IEEE754_RD
+	[FPU_CSR_RN] = IEEE754_RN,
+	[FPU_CSR_RZ] = IEEE754_RZ,
+	[FPU_CSR_RU] = IEEE754_RU,
+	[FPU_CSR_RD] = IEEE754_RD,
+};
+/* Convert IEEE library modes to Mips rounding mode (0..3). */
+static const unsigned char mips_rm[4] = {
+	[IEEE754_RN] = FPU_CSR_RN,
+	[IEEE754_RZ] = FPU_CSR_RZ,
+	[IEEE754_RD] = FPU_CSR_RD,
+	[IEEE754_RU] = FPU_CSR_RU,
 };
 
 #if __mips >= 4
@@ -196,11 +206,11 @@ static int isBranchInstr(mips_instruction * i)
 static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx)
 {
 	mips_instruction ir;
-	vaddr_t emulpc, contpc;
+	void * emulpc, *contpc;
 	unsigned int cond;
 
-	if (get_user(ir, (mips_instruction *) xcp->cp0_epc)) {
-		fpuemuprivate.stats.errors++;
+	if (get_user(ir, (mips_instruction __user *) xcp->cp0_epc)) {
+		fpuemustats.errors++;
 		return SIGBUS;
 	}
 
@@ -221,41 +231,39 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx)
 		 * Linux MIPS branch emulator operates on context, updating the
 		 * cp0_epc.
 		 */
-		emulpc = REG_TO_VA(xcp->cp0_epc + 4);	/* Snapshot emulation target */
+		emulpc = (void *) (xcp->cp0_epc + 4);	/* Snapshot emulation target */
 
 		if (__compute_return_epc(xcp)) {
 #ifdef CP1DBG
 			printk("failed to emulate branch at %p\n",
-				REG_TO_VA(xcp->cp0_epc));
+				(void *) (xcp->cp0_epc));
 #endif
 			return SIGILL;
 		}
-		if (get_user(ir, (mips_instruction *) emulpc)) {
-			fpuemuprivate.stats.errors++;
+		if (get_user(ir, (mips_instruction __user *) emulpc)) {
+			fpuemustats.errors++;
 			return SIGBUS;
 		}
 		/* __compute_return_epc() will have updated cp0_epc */
-		contpc = REG_TO_VA xcp->cp0_epc;
+		contpc = (void *)  xcp->cp0_epc;
 		/* In order not to confuse ptrace() et al, tweak context */
-		xcp->cp0_epc = VA_TO_REG emulpc - 4;
-	}
-	else {
-		emulpc = REG_TO_VA xcp->cp0_epc;
-		contpc = REG_TO_VA(xcp->cp0_epc + 4);
+		xcp->cp0_epc = (unsigned long) emulpc - 4;
+	} else {
+		emulpc = (void *)  xcp->cp0_epc;
+		contpc = (void *) (xcp->cp0_epc + 4);
 	}
 
       emul:
-	fpuemuprivate.stats.emulated++;
+	fpuemustats.emulated++;
 	switch (MIPSInst_OPCODE(ir)) {
-#ifndef SINGLE_ONLY_FPU
 	case ldc1_op:{
-		u64 *va = REG_TO_VA(xcp->regs[MIPSInst_RS(ir)] +
+		u64 __user *va = (u64 __user *) (xcp->regs[MIPSInst_RS(ir)] +
 			MIPSInst_SIMM(ir));
 		u64 val;
 
-		fpuemuprivate.stats.loads++;
+		fpuemustats.loads++;
 		if (get_user(val, va)) {
-			fpuemuprivate.stats.errors++;
+			fpuemustats.errors++;
 			return SIGBUS;
 		}
 		DITOREG(val, MIPSInst_RT(ir));
@@ -263,55 +271,42 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx)
 	}
 
 	case sdc1_op:{
-		u64 *va = REG_TO_VA(xcp->regs[MIPSInst_RS(ir)] +
+		u64 __user *va = (u64 __user *) (xcp->regs[MIPSInst_RS(ir)] +
 			MIPSInst_SIMM(ir));
 		u64 val;
 
-		fpuemuprivate.stats.stores++;
+		fpuemustats.stores++;
 		DIFROMREG(val, MIPSInst_RT(ir));
 		if (put_user(val, va)) {
-			fpuemuprivate.stats.errors++;
+			fpuemustats.errors++;
 			return SIGBUS;
 		}
 		break;
 	}
-#endif
 
 	case lwc1_op:{
-		u32 *va = REG_TO_VA(xcp->regs[MIPSInst_RS(ir)] +
+		u32 __user *va = (u32 __user *) (xcp->regs[MIPSInst_RS(ir)] +
 			MIPSInst_SIMM(ir));
 		u32 val;
 
-		fpuemuprivate.stats.loads++;
+		fpuemustats.loads++;
 		if (get_user(val, va)) {
-			fpuemuprivate.stats.errors++;
+			fpuemustats.errors++;
 			return SIGBUS;
 		}
-#ifdef SINGLE_ONLY_FPU
-		if (MIPSInst_RT(ir) & 1) {
-			/* illegal register in single-float mode */
-			return SIGILL;
-		}
-#endif
 		SITOREG(val, MIPSInst_RT(ir));
 		break;
 	}
 
 	case swc1_op:{
-		u32 *va = REG_TO_VA(xcp->regs[MIPSInst_RS(ir)] +
+		u32 __user *va = (u32 __user *) (xcp->regs[MIPSInst_RS(ir)] +
 			MIPSInst_SIMM(ir));
 		u32 val;
 
-		fpuemuprivate.stats.stores++;
-#ifdef SINGLE_ONLY_FPU
-		if (MIPSInst_RT(ir) & 1) {
-			/* illegal register in single-float mode */
-			return SIGILL;
-		}
-#endif
+		fpuemustats.stores++;
 		SIFROMREG(val, MIPSInst_RT(ir));
 		if (put_user(val, va)) {
-			fpuemuprivate.stats.errors++;
+			fpuemustats.errors++;
 			return SIGBUS;
 		}
 		break;
@@ -320,7 +315,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx)
 	case cop1_op:
 		switch (MIPSInst_RS(ir)) {
 
-#if defined(__mips64) && !defined(SINGLE_ONLY_FPU)
+#if defined(__mips64)
 		case dmfc_op:
 			/* copregister fs -> gpr[rt] */
 			if (MIPSInst_RT(ir) != 0) {
@@ -337,12 +332,6 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx)
 
 		case mfc_op:
 			/* copregister rd -> gpr[rt] */
-#ifdef SINGLE_ONLY_FPU
-			if (MIPSInst_RD(ir) & 1) {
-				/* illegal register in single-float mode */
-				return SIGILL;
-			}
-#endif
 			if (MIPSInst_RT(ir) != 0) {
 				SIFROMREG(xcp->regs[MIPSInst_RT(ir)],
 					MIPSInst_RD(ir));
@@ -351,12 +340,6 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx)
 
 		case mtc_op:
 			/* copregister rd <- rt */
-#ifdef SINGLE_ONLY_FPU
-			if (MIPSInst_RD(ir) & 1) {
-				/* illegal register in single-float mode */
-				return SIGILL;
-			}
-#endif
 			SITOREG(xcp->regs[MIPSInst_RT(ir)], MIPSInst_RD(ir));
 			break;
 
@@ -369,9 +352,10 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx)
 			}
 			if (MIPSInst_RD(ir) == FPCREG_CSR) {
 				value = ctx->fcr31;
+				value = (value & ~0x3) | mips_rm[value & 0x3];
 #ifdef CSRTRACE
 				printk("%p gpr[%d]<-csr=%08x\n",
-					REG_TO_VA(xcp->cp0_epc),
+					(void *) (xcp->cp0_epc),
 					MIPSInst_RT(ir), value);
 #endif
 			}
@@ -398,14 +382,13 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx)
 			if (MIPSInst_RD(ir) == FPCREG_CSR) {
 #ifdef CSRTRACE
 				printk("%p gpr[%d]->csr=%08x\n",
-					REG_TO_VA(xcp->cp0_epc),
+					(void *) (xcp->cp0_epc),
 					MIPSInst_RT(ir), value);
 #endif
-				ctx->fcr31 = value;
-				/* copy new rounding mode and
-				   flush bit to ieee library state! */
-				ieee754_csr.nod = (ctx->fcr31 & 0x1000000) != 0;
-				ieee754_csr.rm = ieee_rm[value & 0x3];
+				value &= (FPU_CSR_FLUSH | FPU_CSR_ALL_E | FPU_CSR_ALL_S | 0x03);
+				ctx->fcr31 &= ~(FPU_CSR_FLUSH | FPU_CSR_ALL_E | FPU_CSR_ALL_S | 0x03);
+				/* convert to ieee library modes */
+				ctx->fcr31 |= (value & ~0x3) | ieee_rm[value & 0x3];
 			}
 			if ((ctx->fcr31 >> 5) & ctx->fcr31 & FPU_CSR_ALL_E) {
 				return SIGFPE;
@@ -445,20 +428,20 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx)
 				 * instruction
 				 */
 				xcp->cp0_epc += 4;
-				contpc = REG_TO_VA
+				contpc = (void *)
 					(xcp->cp0_epc +
 					(MIPSInst_SIMM(ir) << 2));
 
-				if (get_user(ir, (mips_instruction *)
-						REG_TO_VA xcp->cp0_epc)) {
-					fpuemuprivate.stats.errors++;
+				if (get_user(ir,
+				    (mips_instruction __user *) xcp->cp0_epc)) {
+					fpuemustats.errors++;
 					return SIGBUS;
 				}
 
 				switch (MIPSInst_OPCODE(ir)) {
 				case lwc1_op:
 				case swc1_op:
-#if (__mips >= 2 || __mips64) && !defined(SINGLE_ONLY_FPU)
+#if (__mips >= 2 || defined(__mips64))
 				case ldc1_op:
 				case sdc1_op:
 #endif
@@ -480,7 +463,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx)
 				 * Single step the non-cp1
 				 * instruction in the dslot
 				 */
-				return mips_dsemul(xcp, ir, VA_TO_REG contpc);
+				return mips_dsemul(xcp, ir, (unsigned long) contpc);
 			}
 			else {
 				/* branch not taken */
@@ -539,8 +522,9 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx)
 	}
 
 	/* we did it !! */
-	xcp->cp0_epc = VA_TO_REG(contpc);
+	xcp->cp0_epc = (unsigned long) contpc;
 	xcp->cp0_cause &= ~CAUSEF_BD;
+
 	return 0;
 }
 
@@ -570,7 +554,7 @@ static const unsigned char cmptab[8] = {
 static ieee754##p fpemu_##p##_##name (ieee754##p r, ieee754##p s, \
     ieee754##p t) \
 { \
-	struct ieee754_csr ieee754_csr_save; \
+	struct _ieee754_csr ieee754_csr_save; \
 	s = f1 (s, t); \
 	ieee754_csr_save = ieee754_csr; \
 	s = f2 (s, r); \
@@ -616,54 +600,38 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 {
 	unsigned rcsr = 0;	/* resulting csr */
 
-	fpuemuprivate.stats.cp1xops++;
+	fpuemustats.cp1xops++;
 
 	switch (MIPSInst_FMA_FFMT(ir)) {
 	case s_fmt:{		/* 0 */
 
 		ieee754sp(*handler) (ieee754sp, ieee754sp, ieee754sp);
 		ieee754sp fd, fr, fs, ft;
-		u32 *va;
+		u32 __user *va;
 		u32 val;
 
 		switch (MIPSInst_FUNC(ir)) {
 		case lwxc1_op:
-			va = REG_TO_VA(xcp->regs[MIPSInst_FR(ir)] +
+			va = (void __user *) (xcp->regs[MIPSInst_FR(ir)] +
 				xcp->regs[MIPSInst_FT(ir)]);
 
-			fpuemuprivate.stats.loads++;
+			fpuemustats.loads++;
 			if (get_user(val, va)) {
-				fpuemuprivate.stats.errors++;
+				fpuemustats.errors++;
 				return SIGBUS;
 			}
-#ifdef SINGLE_ONLY_FPU
-			if (MIPSInst_FD(ir) & 1) {
-				/* illegal register in single-float
-				 * mode
-				 */
-				return SIGILL;
-			}
-#endif
 			SITOREG(val, MIPSInst_FD(ir));
 			break;
 
 		case swxc1_op:
-			va = REG_TO_VA(xcp->regs[MIPSInst_FR(ir)] +
+			va = (void __user *) (xcp->regs[MIPSInst_FR(ir)] +
 				xcp->regs[MIPSInst_FT(ir)]);
 
-			fpuemuprivate.stats.stores++;
-#ifdef SINGLE_ONLY_FPU
-			if (MIPSInst_FS(ir) & 1) {
-				/* illegal register in single-float
-				 * mode
-				 */
-				return SIGILL;
-			}
-#endif
+			fpuemustats.stores++;
 
 			SIFROMREG(val, MIPSInst_FS(ir));
 			if (put_user(val, va)) {
-				fpuemuprivate.stats.errors++;
+				fpuemustats.errors++;
 				return SIGBUS;
 			}
 			break;
@@ -699,8 +667,6 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 				rcsr |= FPU_CSR_INV_X | FPU_CSR_INV_S;
 
 			ctx->fcr31 = (ctx->fcr31 & ~FPU_CSR_ALL_X) | rcsr;
-			if (ieee754_csr.nod)
-				ctx->fcr31 |= 0x1000000;
 			if ((ctx->fcr31 >> 5) & ctx->fcr31 & FPU_CSR_ALL_E) {
 				/*printk ("SIGFPE: fpu csr = %08x\n",
 				   ctx->fcr31); */
@@ -715,34 +681,33 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 		break;
 	}
 
-#ifndef SINGLE_ONLY_FPU
 	case d_fmt:{		/* 1 */
 		ieee754dp(*handler) (ieee754dp, ieee754dp, ieee754dp);
 		ieee754dp fd, fr, fs, ft;
-		u64 *va;
+		u64 __user *va;
 		u64 val;
 
 		switch (MIPSInst_FUNC(ir)) {
 		case ldxc1_op:
-			va = REG_TO_VA(xcp->regs[MIPSInst_FR(ir)] +
+			va = (void __user *) (xcp->regs[MIPSInst_FR(ir)] +
 				xcp->regs[MIPSInst_FT(ir)]);
 
-			fpuemuprivate.stats.loads++;
+			fpuemustats.loads++;
 			if (get_user(val, va)) {
-				fpuemuprivate.stats.errors++;
+				fpuemustats.errors++;
 				return SIGBUS;
 			}
 			DITOREG(val, MIPSInst_FD(ir));
 			break;
 
 		case sdxc1_op:
-			va = REG_TO_VA(xcp->regs[MIPSInst_FR(ir)] +
+			va = (void __user *) (xcp->regs[MIPSInst_FR(ir)] +
 				xcp->regs[MIPSInst_FT(ir)]);
 
-			fpuemuprivate.stats.stores++;
+			fpuemustats.stores++;
 			DIFROMREG(val, MIPSInst_FS(ir));
 			if (put_user(val, va)) {
-				fpuemuprivate.stats.errors++;
+				fpuemustats.errors++;
 				return SIGBUS;
 			}
 			break;
@@ -773,7 +738,6 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 		}
 		break;
 	}
-#endif
 
 	case 0x7:		/* 7 */
 		if (MIPSInst_FUNC(ir) != pfetch_op) {
@@ -810,7 +774,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 #endif
 	} rv;			/* resulting value */
 
-	fpuemuprivate.stats.cp1ops++;
+	fpuemustats.cp1ops++;
 	switch (rfmt = (MIPSInst_FFMT(ir) & 0xf)) {
 	case s_fmt:{		/* 0 */
 		union {
@@ -834,7 +798,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 			goto scopbop;
 
 			/* unary  ops */
-#if __mips >= 2 || __mips64
+#if __mips >= 2 || defined(__mips64)
 		case fsqrt_op:
 			handler.u = ieee754sp_sqrt;
 			goto scopuop;
@@ -913,9 +877,6 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 		case fcvts_op:
 			return SIGILL;	/* not defined */
 		case fcvtd_op:{
-#ifdef SINGLE_ONLY_FPU
-			return SIGILL;	/* not defined */
-#else
 			ieee754sp fs;
 
 			SPFROMREG(fs, MIPSInst_FS(ir));
@@ -923,7 +884,6 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 			rfmt = d_fmt;
 			goto copcsr;
 		}
-#endif
 		case fcvtw_op:{
 			ieee754sp fs;
 
@@ -933,7 +893,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 			goto copcsr;
 		}
 
-#if __mips >= 2 || __mips64
+#if __mips >= 2 || defined(__mips64)
 		case fround_op:
 		case ftrunc_op:
 		case fceil_op:
@@ -950,7 +910,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 		}
 #endif /* __mips >= 2 */
 
-#if defined(__mips64) && !defined(SINGLE_ONLY_FPU)
+#if defined(__mips64)
 		case fcvtl_op:{
 			ieee754sp fs;
 
@@ -974,7 +934,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 			rfmt = l_fmt;
 			goto copcsr;
 		}
-#endif /* __mips64 && !fpu(single) */
+#endif /* defined(__mips64) */
 
 		default:
 			if (MIPSInst_FUNC(ir) >= fcmp_op) {
@@ -1001,7 +961,6 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 		break;
 	}
 
-#ifndef SINGLE_ONLY_FPU
 	case d_fmt:{
 		union {
 			ieee754dp(*b) (ieee754dp, ieee754dp);
@@ -1024,7 +983,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 			goto dcopbop;
 
 			/* unary  ops */
-#if __mips >= 2 || __mips64
+#if __mips >= 2 || defined(__mips64)
 		case fsqrt_op:
 			handler.u = ieee754dp_sqrt;
 			goto dcopuop;
@@ -1108,7 +1067,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 			goto copcsr;
 		}
 
-#if __mips >= 2 || __mips64
+#if __mips >= 2 || defined(__mips64)
 		case fround_op:
 		case ftrunc_op:
 		case fceil_op:
@@ -1125,7 +1084,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 		}
 #endif
 
-#if defined(__mips64) && !defined(SINGLE_ONLY_FPU)
+#if defined(__mips64)
 		case fcvtl_op:{
 			ieee754dp fs;
 
@@ -1149,7 +1108,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 			rfmt = l_fmt;
 			goto copcsr;
 		}
-#endif /* __mips >= 3 && !fpu(single) */
+#endif /* __mips >= 3 */
 
 		default:
 			if (MIPSInst_FUNC(ir) >= fcmp_op) {
@@ -1177,7 +1136,6 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 		}
 		break;
 	}
-#endif /* ifndef SINGLE_ONLY_FPU */
 
 	case w_fmt:{
 		ieee754sp fs;
@@ -1189,21 +1147,19 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 			rv.s = ieee754sp_fint(fs.bits);
 			rfmt = s_fmt;
 			goto copcsr;
-#ifndef SINGLE_ONLY_FPU
 		case fcvtd_op:
 			/* convert word to double precision real */
 			SPFROMREG(fs, MIPSInst_FS(ir));
 			rv.d = ieee754dp_fint(fs.bits);
 			rfmt = d_fmt;
 			goto copcsr;
-#endif
 		default:
 			return SIGILL;
 		}
 		break;
 	}
 
-#if defined(__mips64) && !defined(SINGLE_ONLY_FPU)
+#if defined(__mips64)
 	case l_fmt:{
 		switch (MIPSInst_FUNC(ir)) {
 		case fcvts_op:
@@ -1256,18 +1212,16 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 			ctx->fcr31 &= ~cond;
 		break;
 	}
-#ifndef SINGLE_ONLY_FPU
 	case d_fmt:
 		DPTOREG(rv.d, MIPSInst_FD(ir));
 		break;
-#endif
 	case s_fmt:
 		SPTOREG(rv.s, MIPSInst_FD(ir));
 		break;
 	case w_fmt:
 		SITOREG(rv.w, MIPSInst_FD(ir));
 		break;
-#if defined(__mips64) && !defined(SINGLE_ONLY_FPU)
+#if defined(__mips64)
 	case l_fmt:
 		DITOREG(rv.l, MIPSInst_FD(ir));
 		break;
@@ -1279,10 +1233,10 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 	return 0;
 }
 
-int fpu_emulator_cop1Handler(int xcptno, struct pt_regs *xcp,
+int fpu_emulator_cop1Handler(struct pt_regs *xcp,
 	struct mips_fpu_soft_struct *ctx)
 {
-	gpreg_t oldepc, prevepc;
+	unsigned long oldepc, prevepc;
 	mips_instruction insn;
 	int sig = 0;
 
@@ -1290,19 +1244,24 @@ int fpu_emulator_cop1Handler(int xcptno, struct pt_regs *xcp,
 	do {
 		prevepc = xcp->cp0_epc;
 
-		if (get_user(insn, (mips_instruction *) xcp->cp0_epc)) {
-			fpuemuprivate.stats.errors++;
+		if (get_user(insn, (mips_instruction __user *) xcp->cp0_epc)) {
+			fpuemustats.errors++;
 			return SIGBUS;
 		}
 		if (insn == 0)
 			xcp->cp0_epc += 4;	/* skip nops */
 		else {
-			/* Update ieee754_csr. Only relevant if we have a
-			   h/w FPU */
-			ieee754_csr.nod = (ctx->fcr31 & 0x1000000) != 0;
-			ieee754_csr.rm = ieee_rm[ctx->fcr31 & 0x3];
-			ieee754_csr.cx = (ctx->fcr31 >> 12) & 0x1f;
+			/*
+			 * The 'ieee754_csr' is an alias of
+			 * ctx->fcr31.  No need to copy ctx->fcr31 to
+			 * ieee754_csr.  But ieee754_csr.rm is ieee
+			 * library modes. (not mips rounding mode)
+			 */
+			/* convert to ieee library modes */
+			ieee754_csr.rm = ieee_rm[ieee754_csr.rm];
 			sig = cop1Emulate(xcp, ctx);
+			/* revert to mips rounding mode */
+			ieee754_csr.rm = mips_rm[ieee754_csr.rm];
 		}
 
 		if (cpu_has_fpu)
diff --git a/arch/mips/math-emu/dp_sqrt.c b/arch/mips/math-emu/dp_sqrt.c
index c35e871ae975..032328c49888 100644
--- a/arch/mips/math-emu/dp_sqrt.c
+++ b/arch/mips/math-emu/dp_sqrt.c
@@ -37,7 +37,7 @@ static const unsigned table[] = {
 
 ieee754dp ieee754dp_sqrt(ieee754dp x)
 {
-	struct ieee754_csr oldcsr;
+	struct _ieee754_csr oldcsr;
 	ieee754dp y, z, t;
 	unsigned scalx, yh;
 	COMPXDP;
diff --git a/arch/mips/math-emu/dsemul.c b/arch/mips/math-emu/dsemul.c
index aa989c2246da..8079f3d1eca0 100644
--- a/arch/mips/math-emu/dsemul.c
+++ b/arch/mips/math-emu/dsemul.c
@@ -28,9 +28,6 @@
 #endif
 #define __mips 4
 
-extern struct mips_fpu_emulator_private fpuemuprivate;
-
-
 /*
  * Emulate the arbritrary instruction ir at xcp->cp0_epc.  Required when
  * we have to emulate the instruction in a COP1 branch delay slot.  Do
@@ -52,10 +49,10 @@ struct emuframe {
 	mips_instruction	emul;
 	mips_instruction	badinst;
 	mips_instruction	cookie;
-	gpreg_t			epc;
+	unsigned long		epc;
 };
 
-int mips_dsemul(struct pt_regs *regs, mips_instruction ir, gpreg_t cpc)
+int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc)
 {
 	extern asmlinkage void handle_dsemulret(void);
 	mips_instruction *dsemul_insns;
@@ -91,7 +88,7 @@ int mips_dsemul(struct pt_regs *regs, mips_instruction ir, gpreg_t cpc)
 	 */
 
 	/* Ensure that the two instructions are in the same cache line */
-	dsemul_insns = (mips_instruction *) REG_TO_VA ((regs->regs[29] - sizeof(struct emuframe)) & ~0x7);
+	dsemul_insns = (mips_instruction *) ((regs->regs[29] - sizeof(struct emuframe)) & ~0x7);
 	fr = (struct emuframe *) dsemul_insns;
 
 	/* Verify that the stack pointer is not competely insane */
@@ -104,11 +101,11 @@ int mips_dsemul(struct pt_regs *regs, mips_instruction ir, gpreg_t cpc)
 	err |= __put_user(cpc, &fr->epc);
 
 	if (unlikely(err)) {
-		fpuemuprivate.stats.errors++;
+		fpuemustats.errors++;
 		return SIGBUS;
 	}
 
-	regs->cp0_epc = VA_TO_REG & fr->emul;
+	regs->cp0_epc = (unsigned long) &fr->emul;
 
 	flush_cache_sigtramp((unsigned long)&fr->badinst);
 
@@ -118,7 +115,7 @@ int mips_dsemul(struct pt_regs *regs, mips_instruction ir, gpreg_t cpc)
 int do_dsemulret(struct pt_regs *xcp)
 {
 	struct emuframe *fr;
-	gpreg_t epc;
+	unsigned long epc;
 	u32 insn, cookie;
 	int err = 0;
 
@@ -141,7 +138,7 @@ int do_dsemulret(struct pt_regs *xcp)
 	err |= __get_user(cookie, &fr->cookie);
 
 	if (unlikely(err || (insn != BADINST) || (cookie != BD_COOKIE))) {
-		fpuemuprivate.stats.errors++;
+		fpuemustats.errors++;
 		return 0;
 	}
 
diff --git a/arch/mips/math-emu/dsemul.h b/arch/mips/math-emu/dsemul.h
index dbd85f95268d..091f0e76730f 100644
--- a/arch/mips/math-emu/dsemul.h
+++ b/arch/mips/math-emu/dsemul.h
@@ -1,11 +1,5 @@
-typedef long gpreg_t;
-typedef void *vaddr_t;
-
-#define REG_TO_VA (vaddr_t)
-#define VA_TO_REG (gpreg_t)
-
-int mips_dsemul(struct pt_regs *regs, mips_instruction ir, gpreg_t cpc);
-int do_dsemulret(struct pt_regs *xcp);
+extern int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc);
+extern int do_dsemulret(struct pt_regs *xcp);
 
 /* Instruction which will always cause an address error */
 #define AdELOAD 0x8c000001	/* lw $0,1($0) */
diff --git a/arch/mips/math-emu/ieee754.c b/arch/mips/math-emu/ieee754.c
index f0a364adbf34..a93c45dbdefd 100644
--- a/arch/mips/math-emu/ieee754.c
+++ b/arch/mips/math-emu/ieee754.c
@@ -31,6 +31,8 @@
 
 
 #include "ieee754int.h"
+#include "ieee754sp.h"
+#include "ieee754dp.h"
 
 #define DP_EBIAS	1023
 #define DP_EMIN		(-1022)
@@ -40,20 +42,6 @@
 #define SP_EMIN		(-126)
 #define SP_EMAX		127
 
-/* indexed by class */
-const char *const ieee754_cname[] = {
-	"Normal",
-	"Zero",
-	"Denormal",
-	"Infinity",
-	"QNaN",
-	"SNaN",
-};
-
-/* the control status register
-*/
-struct ieee754_csr ieee754_csr;
-
 /* special constants
 */
 
diff --git a/arch/mips/math-emu/ieee754.h b/arch/mips/math-emu/ieee754.h
index b8772f46972d..171f177c0f88 100644
--- a/arch/mips/math-emu/ieee754.h
+++ b/arch/mips/math-emu/ieee754.h
@@ -1,13 +1,8 @@
-/* single and double precision fp ops
- * missing extended precision.
-*/
 /*
  * MIPS floating point support
  * Copyright (C) 1994-2000 Algorithmics Ltd.
  * http://www.algor.co.uk
  *
- * ########################################################################
- *
  *  This program is free software; you can distribute it and/or modify it
  *  under the terms of the GNU General Public License (Version 2) as
  *  published by the Free Software Foundation.
@@ -21,20 +16,18 @@
  *  with this program; if not, write to the Free Software Foundation, Inc.,
  *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
  *
- * ########################################################################
- */
-
-/**************************************************************************
  *  Nov 7, 2000
  *  Modification to allow integration with Linux kernel
  *
  *  Kevin D. Kissell, kevink@mips.com and Carsten Langgard, carstenl@mips.com
  *  Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
- *************************************************************************/
+ */
+#ifndef __ARCH_MIPS_MATH_EMU_IEEE754_H
+#define __ARCH_MIPS_MATH_EMU_IEEE754_H
 
-#ifdef __KERNEL__
-/* Going from Algorithmics to Linux native environment, add this */
+#include <asm/byteorder.h>
 #include <linux/types.h>
+#include <linux/sched.h>
 
 /*
  * Not very pretty, but the Linux kernel's normal va_list definition
@@ -44,18 +37,7 @@
 #include <stdarg.h>
 #endif
 
-#else
-
-/* Note that __KERNEL__ is taken to mean Linux kernel */
-
-#if #system(OpenBSD)
-#include <machine/types.h>
-#endif
-#include <machine/endian.h>
-
-#endif				/* __KERNEL__ */
-
-#if (defined(BYTE_ORDER) && BYTE_ORDER == LITTLE_ENDIAN) || defined(__MIPSEL__)
+#ifdef __LITTLE_ENDIAN
 struct ieee754dp_konst {
 	unsigned mantlo:32;
 	unsigned manthi:20;
@@ -86,13 +68,14 @@ typedef union _ieee754sp {
 } ieee754sp;
 #endif
 
-#if (defined(BYTE_ORDER) && BYTE_ORDER == BIG_ENDIAN) || defined(__MIPSEB__)
+#ifdef __BIG_ENDIAN
 struct ieee754dp_konst {
 	unsigned sign:1;
 	unsigned bexp:11;
 	unsigned manthi:20;
 	unsigned mantlo:32;
 };
+
 typedef union _ieee754dp {
 	struct ieee754dp_konst oparts;
 	struct {
@@ -222,7 +205,6 @@ ieee754dp ieee754dp_sqrt(ieee754dp x);
 #define IEEE754_CLASS_INF	0x03
 #define IEEE754_CLASS_SNAN	0x04
 #define IEEE754_CLASS_QNAN	0x05
-extern const char *const ieee754_cname[];
 
 /* exception numbers */
 #define IEEE754_INEXACT			0x01
@@ -251,93 +233,109 @@ extern const char *const ieee754_cname[];
 
 /* "normal" comparisons
 */
-static __inline int ieee754sp_eq(ieee754sp x, ieee754sp y)
+static inline int ieee754sp_eq(ieee754sp x, ieee754sp y)
 {
 	return ieee754sp_cmp(x, y, IEEE754_CEQ, 0);
 }
 
-static __inline int ieee754sp_ne(ieee754sp x, ieee754sp y)
+static inline int ieee754sp_ne(ieee754sp x, ieee754sp y)
 {
 	return ieee754sp_cmp(x, y,
 			     IEEE754_CLT | IEEE754_CGT | IEEE754_CUN, 0);
 }
 
-static __inline int ieee754sp_lt(ieee754sp x, ieee754sp y)
+static inline int ieee754sp_lt(ieee754sp x, ieee754sp y)
 {
 	return ieee754sp_cmp(x, y, IEEE754_CLT, 0);
 }
 
-static __inline int ieee754sp_le(ieee754sp x, ieee754sp y)
+static inline int ieee754sp_le(ieee754sp x, ieee754sp y)
 {
 	return ieee754sp_cmp(x, y, IEEE754_CLT | IEEE754_CEQ, 0);
 }
 
-static __inline int ieee754sp_gt(ieee754sp x, ieee754sp y)
+static inline int ieee754sp_gt(ieee754sp x, ieee754sp y)
 {
 	return ieee754sp_cmp(x, y, IEEE754_CGT, 0);
 }
 
 
-static __inline int ieee754sp_ge(ieee754sp x, ieee754sp y)
+static inline int ieee754sp_ge(ieee754sp x, ieee754sp y)
 {
 	return ieee754sp_cmp(x, y, IEEE754_CGT | IEEE754_CEQ, 0);
 }
 
-static __inline int ieee754dp_eq(ieee754dp x, ieee754dp y)
+static inline int ieee754dp_eq(ieee754dp x, ieee754dp y)
 {
 	return ieee754dp_cmp(x, y, IEEE754_CEQ, 0);
 }
 
-static __inline int ieee754dp_ne(ieee754dp x, ieee754dp y)
+static inline int ieee754dp_ne(ieee754dp x, ieee754dp y)
 {
 	return ieee754dp_cmp(x, y,
 			     IEEE754_CLT | IEEE754_CGT | IEEE754_CUN, 0);
 }
 
-static __inline int ieee754dp_lt(ieee754dp x, ieee754dp y)
+static inline int ieee754dp_lt(ieee754dp x, ieee754dp y)
 {
 	return ieee754dp_cmp(x, y, IEEE754_CLT, 0);
 }
 
-static __inline int ieee754dp_le(ieee754dp x, ieee754dp y)
+static inline int ieee754dp_le(ieee754dp x, ieee754dp y)
 {
 	return ieee754dp_cmp(x, y, IEEE754_CLT | IEEE754_CEQ, 0);
 }
 
-static __inline int ieee754dp_gt(ieee754dp x, ieee754dp y)
+static inline int ieee754dp_gt(ieee754dp x, ieee754dp y)
 {
 	return ieee754dp_cmp(x, y, IEEE754_CGT, 0);
 }
 
-static __inline int ieee754dp_ge(ieee754dp x, ieee754dp y)
+static inline int ieee754dp_ge(ieee754dp x, ieee754dp y)
 {
 	return ieee754dp_cmp(x, y, IEEE754_CGT | IEEE754_CEQ, 0);
 }
 
 
-/* like strtod
-*/
+/*
+ * Like strtod
+ */
 ieee754dp ieee754dp_fstr(const char *s, char **endp);
 char *ieee754dp_tstr(ieee754dp x, int prec, int fmt, int af);
 
 
-/* the control status register
-*/
-struct ieee754_csr {
-	unsigned pad:13;
+/*
+ * The control status register
+ */
+struct _ieee754_csr {
+#ifdef __BIG_ENDIAN
+	unsigned pad0:7;
 	unsigned nod:1;		/* set 1 for no denormalised numbers */
-	unsigned cx:5;		/* exceptions this operation */
+	unsigned c:1;		/* condition */
+	unsigned pad1:5;
+	unsigned cx:6;		/* exceptions this operation */
 	unsigned mx:5;		/* exception enable  mask */
 	unsigned sx:5;		/* exceptions total */
 	unsigned rm:2;		/* current rounding mode */
+#endif
+#ifdef __LITTLE_ENDIAN
+	unsigned rm:2;		/* current rounding mode */
+	unsigned sx:5;		/* exceptions total */
+	unsigned mx:5;		/* exception enable  mask */
+	unsigned cx:6;		/* exceptions this operation */
+	unsigned pad1:5;
+	unsigned c:1;		/* condition */
+	unsigned nod:1;		/* set 1 for no denormalised numbers */
+	unsigned pad0:7;
+#endif
 };
-extern struct ieee754_csr ieee754_csr;
+#define ieee754_csr (*(struct _ieee754_csr *)(&current->thread.fpu.soft.fcr31))
 
-static __inline unsigned ieee754_getrm(void)
+static inline unsigned ieee754_getrm(void)
 {
 	return (ieee754_csr.rm);
 }
-static __inline unsigned ieee754_setrm(unsigned rm)
+static inline unsigned ieee754_setrm(unsigned rm)
 {
 	return (ieee754_csr.rm = rm);
 }
@@ -345,14 +343,14 @@ static __inline unsigned ieee754_setrm(unsigned rm)
 /*
  * get current exceptions
  */
-static __inline unsigned ieee754_getcx(void)
+static inline unsigned ieee754_getcx(void)
 {
 	return (ieee754_csr.cx);
 }
 
 /* test for current exception condition
  */
-static __inline int ieee754_cxtest(unsigned n)
+static inline int ieee754_cxtest(unsigned n)
 {
 	return (ieee754_csr.cx & n);
 }
@@ -360,21 +358,21 @@ static __inline int ieee754_cxtest(unsigned n)
 /*
  * get sticky exceptions
  */
-static __inline unsigned ieee754_getsx(void)
+static inline unsigned ieee754_getsx(void)
 {
 	return (ieee754_csr.sx);
 }
 
 /* clear sticky conditions
 */
-static __inline unsigned ieee754_clrsx(void)
+static inline unsigned ieee754_clrsx(void)
 {
 	return (ieee754_csr.sx = 0);
 }
 
 /* test for sticky exception condition
  */
-static __inline int ieee754_sxtest(unsigned n)
+static inline int ieee754_sxtest(unsigned n)
 {
 	return (ieee754_csr.sx & n);
 }
@@ -406,52 +404,34 @@ extern const struct ieee754sp_konst __ieee754sp_spcvals[];
 #define ieee754dp_spcvals ((const ieee754dp *)__ieee754dp_spcvals)
 #define ieee754sp_spcvals ((const ieee754sp *)__ieee754sp_spcvals)
 
-/* return infinity with given sign
-*/
-#define ieee754dp_inf(sn)	\
-  (ieee754dp_spcvals[IEEE754_SPCVAL_PINFINITY+(sn)])
-#define ieee754dp_zero(sn) \
-  (ieee754dp_spcvals[IEEE754_SPCVAL_PZERO+(sn)])
-#define ieee754dp_one(sn) \
-  (ieee754dp_spcvals[IEEE754_SPCVAL_PONE+(sn)])
-#define ieee754dp_ten(sn) \
-  (ieee754dp_spcvals[IEEE754_SPCVAL_PTEN+(sn)])
-#define ieee754dp_indef() \
-  (ieee754dp_spcvals[IEEE754_SPCVAL_INDEF])
-#define ieee754dp_max(sn) \
-  (ieee754dp_spcvals[IEEE754_SPCVAL_PMAX+(sn)])
-#define ieee754dp_min(sn) \
-  (ieee754dp_spcvals[IEEE754_SPCVAL_PMIN+(sn)])
-#define ieee754dp_mind(sn) \
-  (ieee754dp_spcvals[IEEE754_SPCVAL_PMIND+(sn)])
-#define ieee754dp_1e31() \
-  (ieee754dp_spcvals[IEEE754_SPCVAL_P1E31])
-#define ieee754dp_1e63() \
-  (ieee754dp_spcvals[IEEE754_SPCVAL_P1E63])
-
-#define ieee754sp_inf(sn) \
-  (ieee754sp_spcvals[IEEE754_SPCVAL_PINFINITY+(sn)])
-#define ieee754sp_zero(sn) \
-  (ieee754sp_spcvals[IEEE754_SPCVAL_PZERO+(sn)])
-#define ieee754sp_one(sn) \
-  (ieee754sp_spcvals[IEEE754_SPCVAL_PONE+(sn)])
-#define ieee754sp_ten(sn) \
-  (ieee754sp_spcvals[IEEE754_SPCVAL_PTEN+(sn)])
-#define ieee754sp_indef() \
-  (ieee754sp_spcvals[IEEE754_SPCVAL_INDEF])
-#define ieee754sp_max(sn) \
-  (ieee754sp_spcvals[IEEE754_SPCVAL_PMAX+(sn)])
-#define ieee754sp_min(sn) \
-  (ieee754sp_spcvals[IEEE754_SPCVAL_PMIN+(sn)])
-#define ieee754sp_mind(sn) \
-  (ieee754sp_spcvals[IEEE754_SPCVAL_PMIND+(sn)])
-#define ieee754sp_1e31() \
-  (ieee754sp_spcvals[IEEE754_SPCVAL_P1E31])
-#define ieee754sp_1e63() \
-  (ieee754sp_spcvals[IEEE754_SPCVAL_P1E63])
-
-/* indefinite integer value
-*/
+/*
+ * Return infinity with given sign
+ */
+#define ieee754dp_inf(sn)     (ieee754dp_spcvals[IEEE754_SPCVAL_PINFINITY+(sn)])
+#define ieee754dp_zero(sn)	(ieee754dp_spcvals[IEEE754_SPCVAL_PZERO+(sn)])
+#define ieee754dp_one(sn)	(ieee754dp_spcvals[IEEE754_SPCVAL_PONE+(sn)])
+#define ieee754dp_ten(sn)	(ieee754dp_spcvals[IEEE754_SPCVAL_PTEN+(sn)])
+#define ieee754dp_indef()	(ieee754dp_spcvals[IEEE754_SPCVAL_INDEF])
+#define ieee754dp_max(sn)	(ieee754dp_spcvals[IEEE754_SPCVAL_PMAX+(sn)])
+#define ieee754dp_min(sn)	(ieee754dp_spcvals[IEEE754_SPCVAL_PMIN+(sn)])
+#define ieee754dp_mind(sn)	(ieee754dp_spcvals[IEEE754_SPCVAL_PMIND+(sn)])
+#define ieee754dp_1e31()	(ieee754dp_spcvals[IEEE754_SPCVAL_P1E31])
+#define ieee754dp_1e63()	(ieee754dp_spcvals[IEEE754_SPCVAL_P1E63])
+
+#define ieee754sp_inf(sn)     (ieee754sp_spcvals[IEEE754_SPCVAL_PINFINITY+(sn)])
+#define ieee754sp_zero(sn)	(ieee754sp_spcvals[IEEE754_SPCVAL_PZERO+(sn)])
+#define ieee754sp_one(sn)	(ieee754sp_spcvals[IEEE754_SPCVAL_PONE+(sn)])
+#define ieee754sp_ten(sn)	(ieee754sp_spcvals[IEEE754_SPCVAL_PTEN+(sn)])
+#define ieee754sp_indef()	(ieee754sp_spcvals[IEEE754_SPCVAL_INDEF])
+#define ieee754sp_max(sn)	(ieee754sp_spcvals[IEEE754_SPCVAL_PMAX+(sn)])
+#define ieee754sp_min(sn)	(ieee754sp_spcvals[IEEE754_SPCVAL_PMIN+(sn)])
+#define ieee754sp_mind(sn)	(ieee754sp_spcvals[IEEE754_SPCVAL_PMIND+(sn)])
+#define ieee754sp_1e31()	(ieee754sp_spcvals[IEEE754_SPCVAL_P1E31])
+#define ieee754sp_1e63()	(ieee754sp_spcvals[IEEE754_SPCVAL_P1E63])
+
+/*
+ * Indefinite integer value
+ */
 #define ieee754si_indef()	INT_MAX
 #ifdef LONG_LONG_MAX
 #define ieee754di_indef()	LONG_LONG_MAX
@@ -487,3 +467,5 @@ extern void ieee754_xcpt(struct ieee754xctx *xcp);
 /* compat */
 #define ieee754dp_fix(x)	ieee754dp_tint(x)
 #define ieee754sp_fix(x)	ieee754sp_tint(x)
+
+#endif /* __ARCH_MIPS_MATH_EMU_IEEE754_H */
diff --git a/arch/mips/math-emu/kernel_linkage.c b/arch/mips/math-emu/kernel_linkage.c
index 4002f0cf79f3..d187ab71c2ff 100644
--- a/arch/mips/math-emu/kernel_linkage.c
+++ b/arch/mips/math-emu/kernel_linkage.c
@@ -27,8 +27,6 @@
 
 #include <asm/fpu_emulator.h>
 
-extern struct mips_fpu_emulator_private fpuemuprivate;
-
 #define SIGNALLING_NAN 0x7ff800007ff80000LL
 
 void fpu_emulator_init_fpu(void)
@@ -65,7 +63,6 @@ int fpu_emulator_save_context(struct sigcontext *sc)
 			       &sc->sc_fpregs[i]);
 	}
 	err |= __put_user(current->thread.fpu.soft.fcr31, &sc->sc_fpc_csr);
-	err |= __put_user(fpuemuprivate.eir, &sc->sc_fpc_eir);
 
 	return err;
 }
@@ -81,7 +78,6 @@ int fpu_emulator_restore_context(struct sigcontext *sc)
 			       &sc->sc_fpregs[i]);
 	}
 	err |= __get_user(current->thread.fpu.soft.fcr31, &sc->sc_fpc_csr);
-	err |= __get_user(fpuemuprivate.eir, &sc->sc_fpc_eir);
 
 	return err;
 }
@@ -102,7 +98,6 @@ int fpu_emulator_save_context32(struct sigcontext32 *sc)
 			       &sc->sc_fpregs[i]);
 	}
 	err |= __put_user(current->thread.fpu.soft.fcr31, &sc->sc_fpc_csr);
-	err |= __put_user(fpuemuprivate.eir, &sc->sc_fpc_eir);
 
 	return err;
 }
@@ -118,7 +113,6 @@ int fpu_emulator_restore_context32(struct sigcontext32 *sc)
 			       &sc->sc_fpregs[i]);
 	}
 	err |= __get_user(current->thread.fpu.soft.fcr31, &sc->sc_fpc_csr);
-	err |= __get_user(fpuemuprivate.eir, &sc->sc_fpc_eir);
 
 	return err;
 }
diff --git a/arch/mips/mips-boards/atlas/atlas_int.c b/arch/mips/mips-boards/atlas/atlas_int.c
index 19d4b0792460..bc0ebc69bfb3 100644
--- a/arch/mips/mips-boards/atlas/atlas_int.c
+++ b/arch/mips/mips-boards/atlas/atlas_int.c
@@ -76,14 +76,13 @@ static void end_atlas_irq(unsigned int irq)
 }
 
 static struct hw_interrupt_type atlas_irq_type = {
-	"Atlas",
-	startup_atlas_irq,
-	shutdown_atlas_irq,
-	enable_atlas_irq,
-	disable_atlas_irq,
-	mask_and_ack_atlas_irq,
-	end_atlas_irq,
-	NULL
+	.typename = "Atlas",
+	.startup = startup_atlas_irq,
+	.shutdown = shutdown_atlas_irq,
+	.enable = enable_atlas_irq,
+	.disable = disable_atlas_irq,
+	.ack = mask_and_ack_atlas_irq,
+	.end = end_atlas_irq,
 };
 
 static inline int ls1bit32(unsigned int x)
diff --git a/arch/mips/mips-boards/atlas/atlas_setup.c b/arch/mips/mips-boards/atlas/atlas_setup.c
index 0a1dd9bbc02e..625843b30bed 100644
--- a/arch/mips/mips-boards/atlas/atlas_setup.c
+++ b/arch/mips/mips-boards/atlas/atlas_setup.c
@@ -50,8 +50,10 @@ const char *get_system_type(void)
 	return "MIPS Atlas";
 }
 
-static int __init atlas_setup(void)
+void __init plat_setup(void)
 {
+	mips_pcibios_init();
+
 	ioport_resource.end = 0x7fffffff;
 
 	serial_init ();
@@ -64,12 +66,8 @@ static int __init atlas_setup(void)
 	board_time_init = mips_time_init;
 	board_timer_setup = mips_timer_setup;
 	rtc_get_time = mips_rtc_get_time;
-
-	return 0;
 }
 
-early_initcall(atlas_setup);
-
 static void __init serial_init(void)
 {
 #ifdef CONFIG_SERIAL_8250
diff --git a/arch/mips/mips-boards/generic/init.c b/arch/mips/mips-boards/generic/init.c
index 311155d1d3ed..eab5a705e989 100644
--- a/arch/mips/mips-boards/generic/init.c
+++ b/arch/mips/mips-boards/generic/init.c
@@ -1,6 +1,8 @@
 /*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 1999, 2000, 2004, 2005  MIPS Technologies, Inc.
+ *	All rights reserved.
+ *	Authors: Carsten Langgaard <carstenl@mips.com>
+ *		 Maciej W. Rozycki <macro@mips.com>
  *
  *  This program is free software; you can distribute it and/or modify it
  *  under the terms of the GNU General Public License (Version 2) as
@@ -22,18 +24,19 @@
 #include <linux/string.h>
 #include <linux/kernel.h>
 
-#include <asm/io.h>
 #include <asm/bootinfo.h>
+#include <asm/gt64120.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/cacheflush.h>
+#include <asm/traps.h>
+
 #include <asm/mips-boards/prom.h>
 #include <asm/mips-boards/generic.h>
-#ifdef CONFIG_MIPS_GT64120
-#include <asm/gt64120.h>
-#endif
-#include <asm/mips-boards/msc01_pci.h>
 #include <asm/mips-boards/bonito64.h>
-#ifdef CONFIG_MIPS_MALTA
+#include <asm/mips-boards/msc01_pci.h>
+
 #include <asm/mips-boards/malta.h>
-#endif
 
 #ifdef CONFIG_KGDB
 extern int rs_kgdb_hook(int, int);
@@ -223,8 +226,34 @@ void __init kgdb_config (void)
 }
 #endif
 
+void __init mips_nmi_setup (void)
+{
+	void *base;
+	extern char except_vec_nmi;
+
+	base = cpu_has_veic ?
+		(void *)(CAC_BASE + 0xa80) :
+		(void *)(CAC_BASE + 0x380);
+	memcpy(base, &except_vec_nmi, 0x80);
+	flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
+}
+
+void __init mips_ejtag_setup (void)
+{
+	void *base;
+	extern char except_vec_ejtag_debug;
+
+	base = cpu_has_veic ?
+		(void *)(CAC_BASE + 0xa00) :
+		(void *)(CAC_BASE + 0x300);
+	memcpy(base, &except_vec_ejtag_debug, 0x80);
+	flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
+}
+
 void __init prom_init(void)
 {
+	u32 start, map, mask, data;
+
 	prom_argc = fw_arg0;
 	_prom_argv = (int *) fw_arg1;
 	_prom_envp = (int *) fw_arg2;
@@ -266,12 +295,15 @@ void __init prom_init(void)
 #else
 		GT_WRITE(GT_PCI0_CMD_OFS, 0);
 #endif
+		/* Fix up PCI I/O mapping if necessary (for Atlas).  */
+		start = GT_READ(GT_PCI0IOLD_OFS);
+		map = GT_READ(GT_PCI0IOREMAP_OFS);
+		if ((start & map) != 0) {
+			map &= ~start;
+			GT_WRITE(GT_PCI0IOREMAP_OFS, map);
+		}
 
-#ifdef CONFIG_MIPS_MALTA
 		set_io_port_base(MALTA_GT_PORT_BASE);
-#else
-		set_io_port_base((unsigned long)ioremap(0, 0x20000000));
-#endif
 		break;
 
 	case MIPS_REVISION_CORID_CORE_EMUL_BON:
@@ -300,18 +332,21 @@ void __init prom_init(void)
 			BONITO_BONGENCFG_BYTESWAP;
 #endif
 
-#ifdef CONFIG_MIPS_MALTA
 		set_io_port_base(MALTA_BONITO_PORT_BASE);
-#else
-		set_io_port_base((unsigned long)ioremap(0, 0x20000000));
-#endif
 		break;
 
 	case MIPS_REVISION_CORID_CORE_MSC:
 	case MIPS_REVISION_CORID_CORE_FPGA2:
+	case MIPS_REVISION_CORID_CORE_FPGA3:
 	case MIPS_REVISION_CORID_CORE_EMUL_MSC:
 		_pcictrl_msc = (unsigned long)ioremap(MIPS_MSC01_PCI_REG_BASE, 0x2000);
 
+		mb();
+		MSC_READ(MSC01_PCI_CFG, data);
+		MSC_WRITE(MSC01_PCI_CFG, data & ~MSC01_PCI_CFG_EN_BIT);
+		wmb();
+
+		/* Fix up lane swapping.  */
 #ifdef CONFIG_CPU_LITTLE_ENDIAN
 		MSC_WRITE(MSC01_PCI_SWAP, MSC01_PCI_SWAP_NOSWAP);
 #else
@@ -320,12 +355,23 @@ void __init prom_init(void)
 			  MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_MEM_SHF |
 			  MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_BAR0_SHF);
 #endif
+		/* Fix up target memory mapping.  */
+		MSC_READ(MSC01_PCI_BAR0, mask);
+		MSC_WRITE(MSC01_PCI_P2SCMSKL, mask & MSC01_PCI_BAR0_SIZE_MSK);
+
+		/* Don't handle target retries indefinitely.  */
+		if ((data & MSC01_PCI_CFG_MAXRTRY_MSK) ==
+		    MSC01_PCI_CFG_MAXRTRY_MSK)
+			data = (data & ~(MSC01_PCI_CFG_MAXRTRY_MSK <<
+					 MSC01_PCI_CFG_MAXRTRY_SHF)) |
+			       ((MSC01_PCI_CFG_MAXRTRY_MSK - 1) <<
+				MSC01_PCI_CFG_MAXRTRY_SHF);
+
+		wmb();
+		MSC_WRITE(MSC01_PCI_CFG, data);
+		mb();
 
-#ifdef CONFIG_MIPS_MALTA
 		set_io_port_base(MALTA_MSC_PORT_BASE);
-#else
-		set_io_port_base((unsigned long)ioremap(0, 0x20000000));
-#endif
 		break;
 
 	default:
@@ -334,6 +380,9 @@ void __init prom_init(void)
 		while(1);   /* We die here... */
 	}
 #endif
+	board_nmi_handler_setup = mips_nmi_setup;
+	board_ejtag_handler_setup = mips_ejtag_setup;
+
 	prom_printf("\nLINUX started...\n");
 	prom_init_cmdline();
 	prom_meminit();
diff --git a/arch/mips/mips-boards/generic/memory.c b/arch/mips/mips-boards/generic/memory.c
index 5ae2b43e4c2e..2c8afd77a20b 100644
--- a/arch/mips/mips-boards/generic/memory.c
+++ b/arch/mips/mips-boards/generic/memory.c
@@ -22,6 +22,7 @@
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/bootmem.h>
+#include <linux/string.h>
 
 #include <asm/bootinfo.h>
 #include <asm/page.h>
@@ -55,18 +56,30 @@ struct prom_pmemblock * __init prom_getmdesc(void)
 {
 	char *memsize_str;
 	unsigned int memsize;
+	char cmdline[CL_SIZE], *ptr;
 
-	memsize_str = prom_getenv("memsize");
-	if (!memsize_str) {
-		prom_printf("memsize not set in boot prom, set to default (32Mb)\n");
-		memsize = 0x02000000;
-	} else {
+	/* Check the command line first for a memsize directive */
+	strcpy(cmdline, arcs_cmdline);
+	ptr = strstr(cmdline, "memsize=");
+	if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' '))
+		ptr = strstr(ptr, " memsize=");
+
+	if (ptr) {
+		memsize = memparse(ptr + 8, &ptr);
+	}
+	else {
+		/* otherwise look in the environment */
+		memsize_str = prom_getenv("memsize");
+		if (!memsize_str) {
+			prom_printf("memsize not set in boot prom, set to default (32Mb)\n");
+			memsize = 0x02000000;
+		} else {
 #ifdef DEBUG
-		prom_printf("prom_memsize = %s\n", memsize_str);
+			prom_printf("prom_memsize = %s\n", memsize_str);
 #endif
-		memsize = simple_strtol(memsize_str, NULL, 0);
+			memsize = simple_strtol(memsize_str, NULL, 0);
+		}
 	}
-
 	memset(mdesc, 0, sizeof(mdesc));
 
 	mdesc[0].type = yamon_dontuse;
diff --git a/arch/mips/mips-boards/generic/mipsIRQ.S b/arch/mips/mips-boards/generic/mipsIRQ.S
index 131f49bccb20..a397ecb872d6 100644
--- a/arch/mips/mips-boards/generic/mipsIRQ.S
+++ b/arch/mips/mips-boards/generic/mipsIRQ.S
@@ -29,6 +29,20 @@
 #include <asm/regdef.h>
 #include <asm/stackframe.h>
 
+#ifdef CONFIG_MIPS_ATLAS
+#include <asm/mips-boards/atlasint.h>
+#define CASCADE_IRQ		MIPSCPU_INT_ATLAS
+#define CASCADE_DISPATCH	atlas_hw0_irqdispatch
+#endif
+#ifdef CONFIG_MIPS_MALTA
+#include <asm/mips-boards/maltaint.h>
+#define CASCADE_IRQ		MIPSCPU_INT_I8259A
+#define CASCADE_DISPATCH	malta_hw0_irqdispatch
+#endif
+#ifdef CONFIG_MIPS_SEAD
+#include <asm/mips-boards/seadint.h>
+#endif
+
 /* A lot of complication here is taken away because:
  *
  * 1) We handle one interrupt and return, sitting in a loop and moving across
@@ -80,74 +94,62 @@
 
 	mfc0	s0, CP0_CAUSE		# get irq bits
 	mfc0	s1, CP0_STATUS		# get irq mask
+	andi	s0, ST0_IM		# CAUSE.CE may be non-zero!
 	and	s0, s1
 
-	/* First we check for r4k counter/timer IRQ. */
-	andi	a0, s0, CAUSEF_IP7
-	beq	a0, zero, 1f
-	 andi	a0, s0, CAUSEF_IP2	# delay slot, check hw0 interrupt
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
+ 	.set	mips32
+	clz	a0, s0
+	.set	mips0
+	negu	a0
+	addu	a0, 31-CAUSEB_IP
+	bltz	a0, spurious
+#else
+	beqz	s0, spurious
+	 li	a0, 7
 
-	/* Wheee, a timer interrupt. */
-	move	a0, sp
-	jal	mips_timer_interrupt
-	 nop
+	and	t0, s0, 0xf000
+	sltiu	t0, t0, 1
+	sll	t0, 2
+	subu	a0, t0
+	sll	s0, t0
 
-	j	ret_from_irq
-	 nop
+	and	t0, s0, 0xc000
+	sltiu	t0, t0, 1
+	sll	t0, 1
+	subu	a0, t0
+	sll	s0, t0
 
-1:
-#if defined(CONFIG_MIPS_SEAD)
-	beq	a0, zero, 1f
-	 andi	a0, s0, CAUSEF_IP3	# delay slot, check hw1 interrupt
-#else
-	beq	a0, zero, 1f		# delay slot, check hw3 interrupt
- 	 andi	a0, s0, CAUSEF_IP5
+	and	t0, s0, 0x8000
+	sltiu	t0, t0, 1
+	# sll	t0, 0
+	subu	a0, t0
+	# sll	s0, t0
 #endif
 
-	/* Wheee, combined hardware level zero interrupt. */
-#if defined(CONFIG_MIPS_ATLAS)
-	jal	atlas_hw0_irqdispatch
-#elif defined(CONFIG_MIPS_MALTA)
-	jal	malta_hw0_irqdispatch
-#elif defined(CONFIG_MIPS_SEAD)
-	jal	sead_hw0_irqdispatch
-#else
-#error "MIPS board not supported\n"
-#endif
-	 move	a0, sp			# delay slot
+#ifdef CASCADE_IRQ
+	 li	a1, CASCADE_IRQ
+	bne	a0, a1, 1f
+	 addu	a0, MIPSCPU_INT_BASE
 
-	j	ret_from_irq
-	 nop				# delay slot
+	jal	CASCADE_DISPATCH
+	 move	 a0, sp
 
-1:
-#if defined(CONFIG_MIPS_SEAD)
-	beq	a0, zero, 1f
-	 andi	a0, s0, CAUSEF_IP5	# delay slot, check hw3 interrupt
-	jal	sead_hw1_irqdispatch
-	 move	a0, sp			# delay slot
-	j	ret_from_irq
-	 nop				# delay slot
-1:
-#endif
-#if defined(CONFIG_MIPS_MALTA)
-	beq	a0, zero, 1f            # check hw3 (coreHI) interrupt
-	 nop
-	jal	corehi_irqdispatch
-	 move	a0, sp
 	j	ret_from_irq
 	 nop
 1:
+#else
+	 addu	a0, MIPSCPU_INT_BASE
 #endif
-	/*
-	 * Here by mistake?  This is possible, what can happen is that by the
-	 * time we take the exception the IRQ pin goes low, so just leave if
-	 * this is the case.
-	 */
-	move	a1,s0
-	PRINT("Got interrupt: c0_cause = %08x\n")
-	mfc0	a1, CP0_EPC
-	PRINT("c0_epc = %08x\n")
+
+	jal	do_IRQ
+	 move	a1, sp
 
 	j	ret_from_irq
 	 nop
+
+
+spurious:
+	j	spurious_interrupt
+	 nop
 	END(mipsIRQ)
diff --git a/arch/mips/mips-boards/generic/pci.c b/arch/mips/mips-boards/generic/pci.c
index 92c34bda02ae..1f6f9df74ab2 100644
--- a/arch/mips/mips-boards/generic/pci.c
+++ b/arch/mips/mips-boards/generic/pci.c
@@ -1,6 +1,8 @@
 /*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999, 2000 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 1999, 2000, 2004, 2005  MIPS Technologies, Inc.
+ *	All rights reserved.
+ *	Authors: Carsten Langgaard <carstenl@mips.com>
+ *		 Maciej W. Rozycki <macro@mips.com>
  *
  * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
  *
@@ -19,65 +21,46 @@
  *
  * MIPS boards specific PCI support.
  */
-#include <linux/config.h>
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <asm/mips-boards/generic.h>
 #include <asm/gt64120.h>
+
+#include <asm/mips-boards/generic.h>
 #include <asm/mips-boards/bonito64.h>
 #include <asm/mips-boards/msc01_pci.h>
-#ifdef CONFIG_MIPS_MALTA
-#include <asm/mips-boards/malta.h>
-#endif
 
 static struct resource bonito64_mem_resource = {
 	.name	= "Bonito PCI MEM",
-	.start	= 0x10000000UL,
-	.end	= 0x1bffffffUL,
 	.flags	= IORESOURCE_MEM,
 };
 
 static struct resource bonito64_io_resource = {
-	.name	= "Bonito IO MEM",
-	.start	= 0x00002000UL,	/* avoid conflicts with YAMON allocated I/O addresses */
+	.name	= "Bonito PCI I/O",
+	.start	= 0x00000000UL,
 	.end	= 0x000fffffUL,
 	.flags	= IORESOURCE_IO,
 };
 
 static struct resource gt64120_mem_resource = {
-	.name	= "GT64120 PCI MEM",
-	.start	= 0x10000000UL,
-	.end	= 0x1bdfffffUL,
+	.name	= "GT-64120 PCI MEM",
 	.flags	= IORESOURCE_MEM,
 };
 
 static struct resource gt64120_io_resource = {
-	.name	= "GT64120 IO MEM",
-#ifdef CONFIG_MIPS_ATLAS
-	.start	= 0x18000000UL,
-	.end	= 0x181fffffUL,
-#endif
-#ifdef CONFIG_MIPS_MALTA
-	.start	= 0x00002000UL,
-	.end	= 0x001fffffUL,
-#endif
+	.name	= "GT-64120 PCI I/O",
 	.flags	= IORESOURCE_IO,
 };
 
 static struct resource msc_mem_resource = {
 	.name	= "MSC PCI MEM",
-	.start	= 0x10000000UL,
-	.end	= 0x1fffffffUL,
 	.flags	= IORESOURCE_MEM,
 };
 
 static struct resource msc_io_resource = {
-	.name	= "MSC IO MEM",
-	.start	= 0x00002000UL,
-	.end	= 0x007fffffUL,
+	.name	= "MSC PCI I/O",
 	.flags	= IORESOURCE_IO,
 };
 
@@ -89,7 +72,6 @@ static struct pci_controller bonito64_controller = {
 	.pci_ops	= &bonito64_pci_ops,
 	.io_resource	= &bonito64_io_resource,
 	.mem_resource	= &bonito64_mem_resource,
-	.mem_offset	= 0x10000000UL,
 	.io_offset	= 0x00000000UL,
 };
 
@@ -97,21 +79,18 @@ static struct pci_controller gt64120_controller = {
 	.pci_ops	= &gt64120_pci_ops,
 	.io_resource	= &gt64120_io_resource,
 	.mem_resource	= &gt64120_mem_resource,
-	.mem_offset	= 0x00000000UL,
-	.io_offset	= 0x00000000UL,
 };
 
-static struct pci_controller  msc_controller = {
+static struct pci_controller msc_controller = {
 	.pci_ops	= &msc_pci_ops,
 	.io_resource	= &msc_io_resource,
 	.mem_resource	= &msc_mem_resource,
-	.mem_offset	= 0x10000000UL,
-	.io_offset	= 0x00000000UL,
 };
 
-static int __init pcibios_init(void)
+void __init mips_pcibios_init(void)
 {
 	struct pci_controller *controller;
+	unsigned long start, end, map, start1, end1, map1, map2, map3, mask;
 
 	switch (mips_revision_corid) {
 	case MIPS_REVISION_CORID_QED_RM5261:
@@ -130,34 +109,140 @@ static int __init pcibios_init(void)
 			 (0 << GT_PCI0_CFGADDR_DEVNUM_SHF) | /* GT64120 dev */
 			 (0 << GT_PCI0_CFGADDR_FUNCTNUM_SHF) | /* Function 0*/
 			 ((0x20/4) << GT_PCI0_CFGADDR_REGNUM_SHF) | /* BAR 4*/
-			 GT_PCI0_CFGADDR_CONFIGEN_BIT );
+			 GT_PCI0_CFGADDR_CONFIGEN_BIT);
 
 		/* Perform the write */
 		GT_WRITE(GT_PCI0_CFGDATA_OFS, CPHYSADDR(MIPS_GT_BASE));
 
+		/* Set up resource ranges from the controller's registers.  */
+		start = GT_READ(GT_PCI0M0LD_OFS);
+		end = GT_READ(GT_PCI0M0HD_OFS);
+		map = GT_READ(GT_PCI0M0REMAP_OFS);
+		end = (end & GT_PCI_HD_MSK) | (start & ~GT_PCI_HD_MSK);
+		start1 = GT_READ(GT_PCI0M1LD_OFS);
+		end1 = GT_READ(GT_PCI0M1HD_OFS);
+		map1 = GT_READ(GT_PCI0M1REMAP_OFS);
+		end1 = (end1 & GT_PCI_HD_MSK) | (start1 & ~GT_PCI_HD_MSK);
+		/* Cannot support multiple windows, use the wider.  */
+		if (end1 - start1 > end - start) {
+			start = start1;
+			end = end1;
+			map = map1;
+		}
+		mask = ~(start ^ end);
+                /* We don't support remapping with a discontiguous mask.  */
+		BUG_ON((start & GT_PCI_HD_MSK) != (map & GT_PCI_HD_MSK) &&
+		       mask != ~((mask & -mask) - 1));
+		gt64120_mem_resource.start = start;
+		gt64120_mem_resource.end = end;
+		gt64120_controller.mem_offset = (start & mask) - (map & mask);
+		/* Addresses are 36-bit, so do shifts in the destinations.  */
+		gt64120_mem_resource.start <<= GT_PCI_DCRM_SHF;
+		gt64120_mem_resource.end <<= GT_PCI_DCRM_SHF;
+		gt64120_mem_resource.end |= (1 << GT_PCI_DCRM_SHF) - 1;
+		gt64120_controller.mem_offset <<= GT_PCI_DCRM_SHF;
+
+		start = GT_READ(GT_PCI0IOLD_OFS);
+		end = GT_READ(GT_PCI0IOHD_OFS);
+		map = GT_READ(GT_PCI0IOREMAP_OFS);
+		end = (end & GT_PCI_HD_MSK) | (start & ~GT_PCI_HD_MSK);
+		mask = ~(start ^ end);
+                /* We don't support remapping with a discontiguous mask.  */
+		BUG_ON((start & GT_PCI_HD_MSK) != (map & GT_PCI_HD_MSK) &&
+		       mask != ~((mask & -mask) - 1));
+		gt64120_io_resource.start = map & mask;
+		gt64120_io_resource.end = (map & mask) | ~mask;
+		gt64120_controller.io_offset = 0;
+		/* Addresses are 36-bit, so do shifts in the destinations.  */
+		gt64120_io_resource.start <<= GT_PCI_DCRM_SHF;
+		gt64120_io_resource.end <<= GT_PCI_DCRM_SHF;
+		gt64120_io_resource.end |= (1 << GT_PCI_DCRM_SHF) - 1;
+
 		controller = &gt64120_controller;
 		break;
 
 	case MIPS_REVISION_CORID_BONITO64:
 	case MIPS_REVISION_CORID_CORE_20K:
 	case MIPS_REVISION_CORID_CORE_EMUL_BON:
+		/* Set up resource ranges from the controller's registers.  */
+		map = BONITO_PCIMAP;
+		map1 = (BONITO_PCIMAP & BONITO_PCIMAP_PCIMAP_LO0) >>
+		       BONITO_PCIMAP_PCIMAP_LO0_SHIFT;
+		map2 = (BONITO_PCIMAP & BONITO_PCIMAP_PCIMAP_LO1) >>
+		       BONITO_PCIMAP_PCIMAP_LO1_SHIFT;
+		map3 = (BONITO_PCIMAP & BONITO_PCIMAP_PCIMAP_LO2) >>
+		       BONITO_PCIMAP_PCIMAP_LO2_SHIFT;
+		/* Combine as many adjacent windows as possible.  */
+		map = map1;
+		start = BONITO_PCILO0_BASE;
+		end = 1;
+		if (map3 == map2 + 1) {
+			map = map2;
+			start = BONITO_PCILO1_BASE;
+			end++;
+		}
+		if (map2 == map1 + 1) {
+			map = map1;
+			start = BONITO_PCILO0_BASE;
+			end++;
+		}
+		bonito64_mem_resource.start = start;
+		bonito64_mem_resource.end = start +
+					    BONITO_PCIMAP_WINBASE(end) - 1;
+		bonito64_controller.mem_offset = start -
+						 BONITO_PCIMAP_WINBASE(map);
+
 		controller = &bonito64_controller;
 		break;
 
 	case MIPS_REVISION_CORID_CORE_MSC:
 	case MIPS_REVISION_CORID_CORE_FPGA2:
+	case MIPS_REVISION_CORID_CORE_FPGA3:
 	case MIPS_REVISION_CORID_CORE_EMUL_MSC:
+		/* Set up resource ranges from the controller's registers.  */
+		MSC_READ(MSC01_PCI_SC2PMBASL, start);
+		MSC_READ(MSC01_PCI_SC2PMMSKL, mask);
+		MSC_READ(MSC01_PCI_SC2PMMAPL, map);
+		msc_mem_resource.start = start & mask;
+		msc_mem_resource.end = (start & mask) | ~mask;
+		msc_controller.mem_offset = (start & mask) - (map & mask);
+
+		MSC_READ(MSC01_PCI_SC2PIOBASL, start);
+		MSC_READ(MSC01_PCI_SC2PIOMSKL, mask);
+		MSC_READ(MSC01_PCI_SC2PIOMAPL, map);
+		msc_io_resource.start = map & mask;
+		msc_io_resource.end = (map & mask) | ~mask;
+		msc_controller.io_offset = 0;
+		ioport_resource.end = ~mask;
+
+		/* If ranges overlap I/O takes precedence.  */
+		start = start & mask;
+		end = start | ~mask;
+		if ((start >= msc_mem_resource.start &&
+		     start <= msc_mem_resource.end) ||
+		    (end >= msc_mem_resource.start &&
+		     end <= msc_mem_resource.end)) {
+			/* Use the larger space.  */
+			start = max(start, msc_mem_resource.start);
+			end = min(end, msc_mem_resource.end);
+			if (start - msc_mem_resource.start >=
+			    msc_mem_resource.end - end)
+				msc_mem_resource.end = start - 1;
+			else
+				msc_mem_resource.start = end + 1;
+		}
+
 		controller = &msc_controller;
 		break;
 	default:
-		return 1;
+		return;
 	}
 
+	if (controller->io_resource->start < 0x00001000UL)	/* FIXME */
+		controller->io_resource->start = 0x00001000UL;
+
+	iomem_resource.end &= 0xfffffffffULL;			/* 64 GB */
 	ioport_resource.end = controller->io_resource->end;
 
 	register_pci_controller (controller);
-
-	return 0;
 }
-
-early_initcall(pcibios_init);
diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c
index 16315444dd5a..72a12d931cba 100644
--- a/arch/mips/mips-boards/generic/time.c
+++ b/arch/mips/mips-boards/generic/time.c
@@ -31,22 +31,21 @@
 
 #include <asm/mipsregs.h>
 #include <asm/ptrace.h>
+#include <asm/hardirq.h>
+#include <asm/irq.h>
 #include <asm/div64.h>
 #include <asm/cpu.h>
 #include <asm/time.h>
 #include <asm/mc146818-time.h>
+#include <asm/msc01_ic.h>
 
 #include <asm/mips-boards/generic.h>
 #include <asm/mips-boards/prom.h>
+#include <asm/mips-boards/maltaint.h>
+#include <asm/mc146818-time.h>
 
 unsigned long cpu_khz;
 
-#if defined(CONFIG_MIPS_SEAD)
-#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ5)
-#else
-#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)
-#endif
-
 #if defined(CONFIG_MIPS_ATLAS)
 static char display_string[] = "        LINUX ON ATLAS       ";
 #endif
@@ -59,20 +58,61 @@ static char display_string[] = "        LINUX ON SEAD       ";
 static unsigned int display_count = 0;
 #define MAX_DISPLAY_COUNT (sizeof(display_string) - 8)
 
-#define MIPS_CPU_TIMER_IRQ (NR_IRQS-1)
-
 static unsigned int timer_tick_count=0;
+static int mips_cpu_timer_irq;
 
-void mips_timer_interrupt(struct pt_regs *regs)
+static inline void scroll_display_message(void)
 {
 	if ((timer_tick_count++ % HZ) == 0) {
 		mips_display_message(&display_string[display_count++]);
 		if (display_count == MAX_DISPLAY_COUNT)
-		        display_count = 0;
+			display_count = 0;
+	}
+}
+
+static void mips_timer_dispatch (struct pt_regs *regs)
+{
+	do_IRQ (mips_cpu_timer_irq, regs);
+}
 
+irqreturn_t mips_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+#ifdef CONFIG_SMP
+	int cpu = smp_processor_id();
+
+	if (cpu == 0) {
+		/*
+		 * CPU 0 handles the global timer interrupt job and process accounting
+		 * resets count/compare registers to trigger next timer int.
+		 */
+		(void) timer_interrupt(irq, dev_id, regs);
+		scroll_display_message();
+	}
+	else {
+		/* Everyone else needs to reset the timer int here as
+		   ll_local_timer_interrupt doesn't */
+		/*
+		 * FIXME: need to cope with counter underflow.
+		 * More support needs to be added to kernel/time for
+		 * counter/timer interrupts on multiple CPU's
+		 */
+		write_c0_compare (read_c0_count() + (mips_hpt_frequency/HZ));
+		/*
+		 * other CPUs should do profiling and process accounting
+		 */
+		local_timer_interrupt (irq, dev_id, regs);
 	}
 
-	ll_timer_interrupt(MIPS_CPU_TIMER_IRQ, regs);
+	return IRQ_HANDLED;
+#else
+	irqreturn_t r;
+
+	r = timer_interrupt(irq, dev_id, regs);
+
+	scroll_display_message();
+
+	return r;
+#endif
 }
 
 /*
@@ -140,10 +180,8 @@ void __init mips_time_init(void)
 
 	local_irq_save(flags);
 
-#if defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_MALTA)
         /* Set Data mode - binary. */
         CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL);
-#endif
 
 	est_freq = estimate_cpu_frequency ();
 
@@ -157,11 +195,29 @@ void __init mips_time_init(void)
 
 void __init mips_timer_setup(struct irqaction *irq)
 {
+	if (cpu_has_veic) {
+		set_vi_handler (MSC01E_INT_CPUCTR, mips_timer_dispatch);
+		mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR;
+	}
+	else {
+		if (cpu_has_vint)
+			set_vi_handler (MIPSCPU_INT_CPUCTR, mips_timer_dispatch);
+		mips_cpu_timer_irq = MIPSCPU_INT_BASE + MIPSCPU_INT_CPUCTR;
+	}
+
+
 	/* we are using the cpu counter for timer interrupts */
-	irq->handler = no_action;     /* we use our own handler */
-	setup_irq(MIPS_CPU_TIMER_IRQ, irq);
+	irq->handler = mips_timer_interrupt;	/* we use our own handler */
+	setup_irq(mips_cpu_timer_irq, irq);
+
+#ifdef CONFIG_SMP
+	/* irq_desc(riptor) is a global resource, when the interrupt overlaps
+	   on seperate cpu's the first one tries to handle the second interrupt.
+	   The effect is that the int remains disabled on the second cpu.
+	   Mark the interrupt with IRQ_PER_CPU to avoid any confusion */
+	irq_desc[mips_cpu_timer_irq].status |= IRQ_PER_CPU;
+#endif
 
         /* to generate the first timer interrupt */
 	write_c0_compare (read_c0_count() + mips_hpt_frequency/HZ);
-	set_c0_status(ALLINTS);
 }
diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c
index dd2db35966bc..d06dc5ad6c9e 100644
--- a/arch/mips/mips-boards/malta/malta_int.c
+++ b/arch/mips/mips-boards/malta/malta_int.c
@@ -30,6 +30,7 @@
 #include <linux/random.h>
 
 #include <asm/i8259.h>
+#include <asm/irq_cpu.h>
 #include <asm/io.h>
 #include <asm/mips-boards/malta.h>
 #include <asm/mips-boards/maltaint.h>
@@ -37,8 +38,10 @@
 #include <asm/gt64120.h>
 #include <asm/mips-boards/generic.h>
 #include <asm/mips-boards/msc01_pci.h>
+#include <asm/msc01_ic.h>
 
 extern asmlinkage void mipsIRQ(void);
+extern void mips_timer_interrupt(void);
 
 static DEFINE_SPINLOCK(mips_irq_lock);
 
@@ -54,6 +57,7 @@ static inline int mips_pcibios_iack(void)
 	switch(mips_revision_corid) {
 	case MIPS_REVISION_CORID_CORE_MSC:
 	case MIPS_REVISION_CORID_CORE_FPGA2:
+	case MIPS_REVISION_CORID_CORE_FPGA3:
 	case MIPS_REVISION_CORID_CORE_EMUL_MSC:
 	        MSC_READ(MSC01_PCI_IACK, irq);
 		irq &= 0xff;
@@ -91,88 +95,86 @@ static inline int mips_pcibios_iack(void)
 	return irq;
 }
 
-static inline int get_int(int *irq)
+static inline int get_int(void)
 {
 	unsigned long flags;
-
+	int irq;
 	spin_lock_irqsave(&mips_irq_lock, flags);
 
-	*irq = mips_pcibios_iack();
+	irq = mips_pcibios_iack();
 
 	/*
-	 * IRQ7 is used to detect spurious interrupts.
-	 * The interrupt acknowledge cycle returns IRQ7, if no
-	 * interrupts is requested.
-	 * We can differentiate between this situation and a
-	 * "Normal" IRQ7 by reading the ISR.
+	 * The only way we can decide if an interrupt is spurious
+	 * is by checking the 8259 registers.  This needs a spinlock
+	 * on an SMP system,  so leave it up to the generic code...
 	 */
-	if (*irq == 7)
-	{
-		outb(PIIX4_OCW3_SEL | PIIX4_OCW3_ISR,
-		     PIIX4_ICTLR1_OCW3);
-		if (!(inb(PIIX4_ICTLR1_OCW3) & (1 << 7))) {
-			spin_unlock_irqrestore(&mips_irq_lock, flags);
-			printk("We got a spurious interrupt from PIIX4.\n");
-			atomic_inc(&irq_err_count);
-			return -1;    /* Spurious interrupt. */
-		}
-	}
 
 	spin_unlock_irqrestore(&mips_irq_lock, flags);
 
-	return 0;
+	return irq;
 }
 
 void malta_hw0_irqdispatch(struct pt_regs *regs)
 {
 	int irq;
 
-	if (get_int(&irq))
-	        return;  /* interrupt has already been cleared */
+	irq = get_int();
+	if (irq < 0)
+		return;  /* interrupt has already been cleared */
 
-	do_IRQ(irq, regs);
+	do_IRQ(MALTA_INT_BASE+irq, regs);
 }
 
 void corehi_irqdispatch(struct pt_regs *regs)
 {
-        unsigned int data,datahi;
-
-	/* Mask out corehi interrupt. */
-	clear_c0_status(IE_IRQ3);
+	unsigned int intrcause,datalo,datahi;
+        unsigned int pcimstat, intisr, inten, intpol, intedge, intsteer, pcicmd, pcibadaddr;
 
         printk("CoreHI interrupt, shouldn't happen, so we die here!!!\n");
         printk("epc   : %08lx\nStatus: %08lx\nCause : %08lx\nbadVaddr : %08lx\n"
 , regs->cp0_epc, regs->cp0_status, regs->cp0_cause, regs->cp0_badvaddr);
+
+	/* Read all the registers and then print them as there is a
+	   problem with interspersed printk's upsetting the Bonito controller.
+	   Do it for the others too.
+	*/
+
         switch(mips_revision_corid) {
         case MIPS_REVISION_CORID_CORE_MSC:
         case MIPS_REVISION_CORID_CORE_FPGA2:
-	case MIPS_REVISION_CORID_CORE_EMUL_MSC:
+        case MIPS_REVISION_CORID_CORE_FPGA3:
+        case MIPS_REVISION_CORID_CORE_EMUL_MSC:
+                ll_msc_irq(regs);
                 break;
         case MIPS_REVISION_CORID_QED_RM5261:
         case MIPS_REVISION_CORID_CORE_LV:
         case MIPS_REVISION_CORID_CORE_FPGA:
         case MIPS_REVISION_CORID_CORE_FPGAR2:
-                data = GT_READ(GT_INTRCAUSE_OFS);
-                printk("GT_INTRCAUSE = %08x\n", data);
-                data = GT_READ(GT_CPUERR_ADDRLO_OFS);
+                intrcause = GT_READ(GT_INTRCAUSE_OFS);
+                datalo = GT_READ(GT_CPUERR_ADDRLO_OFS);
                 datahi = GT_READ(GT_CPUERR_ADDRHI_OFS);
-                printk("GT_CPUERR_ADDR = %02x%08x\n", datahi, data);
+                printk("GT_INTRCAUSE = %08x\n", intrcause);
+                printk("GT_CPUERR_ADDR = %02x%08x\n", datahi, datalo);
                 break;
         case MIPS_REVISION_CORID_BONITO64:
         case MIPS_REVISION_CORID_CORE_20K:
         case MIPS_REVISION_CORID_CORE_EMUL_BON:
-                data = BONITO_INTISR;
-                printk("BONITO_INTISR = %08x\n", data);
-                data = BONITO_INTEN;
-                printk("BONITO_INTEN = %08x\n", data);
-                data = BONITO_INTPOL;
-                printk("BONITO_INTPOL = %08x\n", data);
-                data = BONITO_INTEDGE;
-                printk("BONITO_INTEDGE = %08x\n", data);
-                data = BONITO_INTSTEER;
-                printk("BONITO_INTSTEER = %08x\n", data);
-                data = BONITO_PCICMD;
-                printk("BONITO_PCICMD = %08x\n", data);
+                pcibadaddr = BONITO_PCIBADADDR;
+                pcimstat = BONITO_PCIMSTAT;
+                intisr = BONITO_INTISR;
+                inten = BONITO_INTEN;
+                intpol = BONITO_INTPOL;
+                intedge = BONITO_INTEDGE;
+                intsteer = BONITO_INTSTEER;
+                pcicmd = BONITO_PCICMD;
+                printk("BONITO_INTISR = %08x\n", intisr);
+                printk("BONITO_INTEN = %08x\n", inten);
+                printk("BONITO_INTPOL = %08x\n", intpol);
+                printk("BONITO_INTEDGE = %08x\n", intedge);
+                printk("BONITO_INTSTEER = %08x\n", intsteer);
+                printk("BONITO_PCICMD = %08x\n", pcicmd);
+                printk("BONITO_PCIBADADDR = %08x\n", pcibadaddr);
+                printk("BONITO_PCIMSTAT = %08x\n", pcimstat);
                 break;
         }
 
@@ -180,8 +182,71 @@ void corehi_irqdispatch(struct pt_regs *regs)
         die("CoreHi interrupt", regs);
 }
 
+static struct irqaction i8259irq = {
+	.handler = no_action,
+	.name = "XT-PIC cascade"
+};
+
+static struct irqaction corehi_irqaction = {
+	.handler = no_action,
+	.name = "CoreHi"
+};
+
+msc_irqmap_t __initdata msc_irqmap[] = {
+	{MSC01C_INT_TMR,		MSC01_IRQ_EDGE, 0},
+	{MSC01C_INT_PCI,		MSC01_IRQ_LEVEL, 0},
+};
+int __initdata msc_nr_irqs = sizeof(msc_irqmap)/sizeof(msc_irqmap_t);
+
+msc_irqmap_t __initdata msc_eicirqmap[] = {
+	{MSC01E_INT_SW0,		MSC01_IRQ_LEVEL, 0},
+	{MSC01E_INT_SW1,		MSC01_IRQ_LEVEL, 0},
+	{MSC01E_INT_I8259A,		MSC01_IRQ_LEVEL, 0},
+	{MSC01E_INT_SMI,		MSC01_IRQ_LEVEL, 0},
+	{MSC01E_INT_COREHI,		MSC01_IRQ_LEVEL, 0},
+	{MSC01E_INT_CORELO,		MSC01_IRQ_LEVEL, 0},
+	{MSC01E_INT_TMR,		MSC01_IRQ_EDGE, 0},
+	{MSC01E_INT_PCI,		MSC01_IRQ_LEVEL, 0},
+	{MSC01E_INT_PERFCTR,		MSC01_IRQ_LEVEL, 0},
+	{MSC01E_INT_CPUCTR,		MSC01_IRQ_LEVEL, 0}
+};
+int __initdata msc_nr_eicirqs = sizeof(msc_eicirqmap)/sizeof(msc_irqmap_t);
+
 void __init arch_init_irq(void)
 {
 	set_except_vector(0, mipsIRQ);
 	init_i8259_irqs();
+
+	if (!cpu_has_veic)
+		mips_cpu_irq_init (MIPSCPU_INT_BASE);
+
+        switch(mips_revision_corid) {
+        case MIPS_REVISION_CORID_CORE_MSC:
+        case MIPS_REVISION_CORID_CORE_FPGA2:
+        case MIPS_REVISION_CORID_CORE_FPGA3:
+        case MIPS_REVISION_CORID_CORE_EMUL_MSC:
+		if (cpu_has_veic)
+			init_msc_irqs (MSC01E_INT_BASE, msc_eicirqmap, msc_nr_eicirqs);
+		else
+			init_msc_irqs (MSC01C_INT_BASE, msc_irqmap, msc_nr_irqs);
+	}
+
+	if (cpu_has_veic) {
+		set_vi_handler (MSC01E_INT_I8259A, malta_hw0_irqdispatch);
+		set_vi_handler (MSC01E_INT_COREHI, corehi_irqdispatch);
+		setup_irq (MSC01E_INT_BASE+MSC01E_INT_I8259A, &i8259irq);
+		setup_irq (MSC01E_INT_BASE+MSC01E_INT_COREHI, &corehi_irqaction);
+	}
+	else if (cpu_has_vint) {
+		set_vi_handler (MIPSCPU_INT_I8259A, malta_hw0_irqdispatch);
+		set_vi_handler (MIPSCPU_INT_COREHI, corehi_irqdispatch);
+
+		setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq);
+		setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction);
+	}
+	else {
+		set_except_vector(0, mipsIRQ);
+		setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq);
+		setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction);
+	}
 }
diff --git a/arch/mips/mips-boards/malta/malta_setup.c b/arch/mips/mips-boards/malta/malta_setup.c
index df6db6419ae9..2209e8a9de34 100644
--- a/arch/mips/mips-boards/malta/malta_setup.c
+++ b/arch/mips/mips-boards/malta/malta_setup.c
@@ -111,10 +111,12 @@ void __init fd_activate(void)
 }
 #endif
 
-static int __init malta_setup(void)
+void __init plat_setup(void)
 {
 	unsigned int i;
 
+	mips_pcibios_init();
+
 	/* Request I/O space for devices used on the Malta board. */
 	for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++)
 		request_resource(&ioport_resource, standard_io_resources+i);
@@ -224,8 +226,4 @@ static int __init malta_setup(void)
 	board_time_init = mips_time_init;
 	board_timer_setup = mips_timer_setup;
 	rtc_get_time = mips_rtc_get_time;
-
-	return 0;
 }
-
-early_initcall(malta_setup);
diff --git a/arch/mips/mips-boards/sead/sead_int.c b/arch/mips/mips-boards/sead/sead_int.c
index e5109657ed5a..90fda0d9915f 100644
--- a/arch/mips/mips-boards/sead/sead_int.c
+++ b/arch/mips/mips-boards/sead/sead_int.c
@@ -2,6 +2,7 @@
  * Carsten Langgaard, carstenl@mips.com
  * Copyright (C) 2002 MIPS Technologies, Inc.  All rights reserved.
  * Copyright (C) 2003 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2004  Maciej W. Rozycki
  *
  *  This program is free software; you can distribute it and/or modify it
  *  under the terms of the GNU General Public License (Version 2) as
@@ -21,31 +22,18 @@
  */
 #include <linux/init.h>
 #include <linux/irq.h>
-#include <linux/interrupt.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/system.h>
 
 #include <asm/mips-boards/seadint.h>
 
 extern asmlinkage void mipsIRQ(void);
 
-asmlinkage void sead_hw0_irqdispatch(struct pt_regs *regs)
-{
-	do_IRQ(SEADINT_UART0, regs);
-}
-
-asmlinkage void sead_hw1_irqdispatch(struct pt_regs *regs)
-{
-	do_IRQ(SEADINT_UART1, regs);
-}
-
 void __init arch_init_irq(void)
 {
-        /*
-         * Mask out all interrupt
-	 */
-	clear_c0_status(0x0000ff00);
+	mips_cpu_irq_init(MIPSCPU_INT_BASE);
 
 	/* Now safe to set the exception vector. */
 	set_except_vector(0, mipsIRQ);
-
-	mips_cpu_irq_init(0);
 }
diff --git a/arch/mips/mips-boards/sead/sead_setup.c b/arch/mips/mips-boards/sead/sead_setup.c
index 29892b88a4fc..f966bc161dfa 100644
--- a/arch/mips/mips-boards/sead/sead_setup.c
+++ b/arch/mips/mips-boards/sead/sead_setup.c
@@ -45,7 +45,7 @@ const char *get_system_type(void)
 	return "MIPS SEAD";
 }
 
-static void __init sead_setup(void)
+void __init plat_setup(void)
 {
 	ioport_resource.end = 0x7fffffff;
 
@@ -57,8 +57,6 @@ static void __init sead_setup(void)
 	mips_reboot_setup();
 }
 
-early_initcall(sead_setup);
-
 static void __init serial_init(void)
 {
 #ifdef CONFIG_SERIAL_8250
@@ -71,7 +69,7 @@ static void __init serial_init(void)
 #else
 	s.iobase = SEAD_UART0_REGS_BASE+3;
 #endif
-	s.irq = SEADINT_UART0;
+	s.irq = MIPSCPU_INT_BASE + MIPSCPU_INT_UART0;
 	s.uartclk = SEAD_BASE_BAUD * 16;
 	s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
 	s.iotype = 0;
diff --git a/arch/mips/mips-boards/sim/Makefile b/arch/mips/mips-boards/sim/Makefile
new file mode 100644
index 000000000000..5b977de4ecff
--- /dev/null
+++ b/arch/mips/mips-boards/sim/Makefile
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2005 MIPS Technologies, Inc.  All rights reserved.
+#
+# This program is free software; you can distribute it and/or modify it
+# under the terms of the GNU General Public License (Version 2) as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+#
+
+obj-y := sim_setup.o sim_mem.o sim_time.o sim_printf.o sim_int.o sim_irq.o \
+	sim_cmdline.o
+obj-$(CONFIG_SMP) += sim_smp.o
diff --git a/arch/mips/mips-boards/sim/cmdline.c b/arch/mips/mips-boards/sim/cmdline.c
new file mode 100644
index 000000000000..fef9fbd8e710
--- /dev/null
+++ b/arch/mips/mips-boards/sim/cmdline.c
@@ -0,0 +1,59 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Kernel command line creation using the prom monitor (YAMON) argc/argv.
+ */
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+
+extern int prom_argc;
+extern int *_prom_argv;
+
+/*
+ * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer.
+ * This macro take care of sign extension.
+ */
+#define prom_argv(index) ((char *)(((int *)(int)_prom_argv)[(index)]))
+
+char arcs_cmdline[CL_SIZE];
+
+char * __init prom_getcmdline(void)
+{
+	return &(arcs_cmdline[0]);
+}
+
+
+void  __init prom_init_cmdline(void)
+{
+	char *cp;
+	int actr;
+
+	actr = 1; /* Always ignore argv[0] */
+
+	cp = &(arcs_cmdline[0]);
+	while(actr < prom_argc) {
+	        strcpy(cp, prom_argv(actr));
+		cp += strlen(prom_argv(actr));
+		*cp++ = ' ';
+		actr++;
+	}
+	if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
+		--cp;
+	*cp = '\0';
+}
diff --git a/arch/mips/mips-boards/sim/sim_IRQ.c b/arch/mips/mips-boards/sim/sim_IRQ.c
new file mode 100644
index 000000000000..9987a85aabeb
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_IRQ.c
@@ -0,0 +1,148 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999, 2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Interrupt exception dispatch code.
+ */
+#include <linux/config.h>
+
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+/* A lot of complication here is taken away because:
+ *
+ * 1) We handle one interrupt and return, sitting in a loop and moving across
+ *    all the pending IRQ bits in the cause register is _NOT_ the answer, the
+ *    common case is one pending IRQ so optimize in that direction.
+ *
+ * 2) We need not check against bits in the status register IRQ mask, that
+ *    would make this routine slow as hell.
+ *
+ * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in
+ *    between like BSD spl() brain-damage.
+ *
+ * Furthermore, the IRQs on the MIPS board look basically (barring software
+ * IRQs which we don't use at all and all external interrupt sources are
+ * combined together on hardware interrupt 0 (MIPS IRQ 2)) like:
+ *
+ *	MIPS IRQ	Source
+ *      --------        ------
+ *             0	Software (ignored)
+ *             1        Software (ignored)
+ *             2        Combined hardware interrupt (hw0)
+ *             3        Hardware (ignored)
+ *             4        Hardware (ignored)
+ *             5        Hardware (ignored)
+ *             6        Hardware (ignored)
+ *             7        R4k timer (what we use)
+ *
+ * Note: On the SEAD board thing are a little bit different.
+ *       Here IRQ 2 (hw0) is wired to the UART0 and IRQ 3 (hw1) is wired
+ *       wired to UART1.
+ *
+ * We handle the IRQ according to _our_ priority which is:
+ *
+ * Highest ----     R4k Timer
+ * Lowest  ----     Combined hardware interrupt
+ *
+ * then we just return, if multiple IRQs are pending then we will just take
+ * another exception, big deal.
+ */
+
+	.text
+	.set	noreorder
+	.set	noat
+	.align	5
+	NESTED(mipsIRQ, PT_SIZE, sp)
+	SAVE_ALL
+	CLI
+	.set	at
+
+	mfc0	s0, CP0_CAUSE		# get irq bits
+	mfc0	s1, CP0_STATUS		# get irq mask
+	and	s0, s1
+
+	/* First we check for r4k counter/timer IRQ. */
+	andi	a0, s0, CAUSEF_IP7
+	beq	a0, zero, 1f
+	 andi	a0, s0, CAUSEF_IP2	# delay slot, check hw0 interrupt
+
+	/* Wheee, a timer interrupt. */
+	move	a0, sp
+	jal	mips_timer_interrupt
+	 nop
+
+	j	ret_from_irq
+	 nop
+
+1:
+#if defined(CONFIG_MIPS_SEAD)
+	beq	a0, zero, 1f
+	 andi	a0, s0, CAUSEF_IP3	# delay slot, check hw1 interrupt
+#else
+	beq	a0, zero, 1f		# delay slot, check hw3 interrupt
+ 	 andi	a0, s0, CAUSEF_IP5
+#endif
+
+	/* Wheee, combined hardware level zero interrupt. */
+#if defined(CONFIG_MIPS_ATLAS)
+	jal	atlas_hw0_irqdispatch
+#elif defined(CONFIG_MIPS_MALTA)
+	jal	malta_hw0_irqdispatch
+#elif defined(CONFIG_MIPS_SEAD)
+	jal	sead_hw0_irqdispatch
+#else
+#error "MIPS board not supported\n"
+#endif
+	 move	a0, sp			# delay slot
+
+	j	ret_from_irq
+	 nop				# delay slot
+
+1:
+#if defined(CONFIG_MIPS_SEAD)
+	beq	a0, zero, 1f
+	 andi	a0, s0, CAUSEF_IP5	# delay slot, check hw3 interrupt
+	jal	sead_hw1_irqdispatch
+	 move	a0, sp			# delay slot
+	j	ret_from_irq
+	 nop				# delay slot
+1:
+#endif
+#if defined(CONFIG_MIPS_MALTA)
+	beq	a0, zero, 1f            # check hw3 (coreHI) interrupt
+	 nop
+	jal	corehi_irqdispatch
+	 move	a0, sp
+	j	ret_from_irq
+	 nop
+1:
+#endif
+	/*
+	 * Here by mistake?  This is possible, what can happen is that by the
+	 * time we take the exception the IRQ pin goes low, so just leave if
+	 * this is the case.
+	 */
+	move	a1,s0
+	PRINT("Got interrupt: c0_cause = %08x\n")
+	mfc0	a1, CP0_EPC
+	PRINT("c0_epc = %08x\n")
+
+	j	ret_from_irq
+	 nop
+	END(mipsIRQ)
diff --git a/arch/mips/mips-boards/sim/sim_cmdline.c b/arch/mips/mips-boards/sim/sim_cmdline.c
new file mode 100644
index 000000000000..9df37c6fca36
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_cmdline.c
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+#include <linux/init.h>
+#include <linux/string.h>
+#include <asm/bootinfo.h>
+
+extern char arcs_cmdline[];
+
+char * __init prom_getcmdline(void)
+{
+	return arcs_cmdline;
+}
+
+
+void  __init prom_init_cmdline(void)
+{
+    /* nothing to do */
+}
diff --git a/arch/mips/mips-boards/sim/sim_int.c b/arch/mips/mips-boards/sim/sim_int.c
new file mode 100644
index 000000000000..a4d0a2c05031
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_int.c
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 1999, 2005 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <asm/mips-boards/simint.h>
+
+
+extern void mips_cpu_irq_init(int);
+
+extern asmlinkage void simIRQ(void);
+
+asmlinkage void sim_hw0_irqdispatch(struct pt_regs *regs)
+{
+	do_IRQ(2, regs);
+}
+
+void __init arch_init_irq(void)
+{
+	/* Now safe to set the exception vector. */
+	set_except_vector(0, simIRQ);
+
+	mips_cpu_irq_init(MIPSCPU_INT_BASE);
+}
diff --git a/arch/mips/mips-boards/sim/sim_irq.S b/arch/mips/mips-boards/sim/sim_irq.S
new file mode 100644
index 000000000000..835f0387fcd4
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_irq.S
@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) 1999, 2005 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Interrupt exception dispatch code.
+ *
+ */
+#include <linux/config.h>
+
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+#include <asm/mips-boards/simint.h>
+
+
+	.text
+	.set	noreorder
+	.set	noat
+	.align	5
+	NESTED(simIRQ, PT_SIZE, sp)
+	SAVE_ALL
+	CLI
+	.set	at
+
+	mfc0	s0, CP0_CAUSE		# get irq bits
+	mfc0	s1, CP0_STATUS		# get irq mask
+	andi	s0, ST0_IM		# CAUSE.CE may be non-zero!
+	and	s0, s1
+
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
+ 	.set	mips32
+	clz	a0, s0
+	.set	mips0
+	negu	a0
+	addu	a0, 31-CAUSEB_IP
+	bltz	a0, spurious
+#else
+	beqz	s0, spurious
+	 li	a0, 7
+
+	and	t0, s0, 0xf000
+	sltiu	t0, t0, 1
+	sll	t0, 2
+	subu	a0, t0
+	sll	s0, t0
+
+	and	t0, s0, 0xc000
+	sltiu	t0, t0, 1
+	sll	t0, 1
+	subu	a0, t0
+	sll	s0, t0
+
+	and	t0, s0, 0x8000
+	sltiu	t0, t0, 1
+	# sll	t0, 0
+	subu	a0, t0
+	# sll	s0, t0
+#endif
+
+#ifdef CASCADE_IRQ
+	 li	a1, CASCADE_IRQ
+	bne	a0, a1, 1f
+	 addu	a0, MIPSCPU_INT_BASE
+
+	jal	CASCADE_DISPATCH
+	 move	 a0, sp
+
+	j	ret_from_irq
+	 nop
+1:
+#else
+	 addu	a0, MIPSCPU_INT_BASE
+#endif
+
+	jal	do_IRQ
+	 move	a1, sp
+
+	j	ret_from_irq
+	 nop
+
+
+spurious:
+	j	spurious_interrupt
+	 nop
+	END(simIRQ)
diff --git a/arch/mips/mips-boards/sim/sim_mem.c b/arch/mips/mips-boards/sim/sim_mem.c
new file mode 100644
index 000000000000..0dbd7435bb2a
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_mem.c
@@ -0,0 +1,129 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+
+#include <asm/bootinfo.h>
+#include <asm/page.h>
+
+#include <asm/mips-boards/prom.h>
+
+/*#define DEBUG*/
+
+enum simmem_memtypes {
+	simmem_reserved = 0,
+	simmem_free,
+};
+struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS];
+
+#ifdef DEBUG
+static char *mtypes[3] = {
+	"SIM reserved memory",
+	"SIM free memory",
+};
+#endif
+
+/* References to section boundaries */
+extern char _end;
+
+#define PFN_ALIGN(x)    (((unsigned long)(x) + (PAGE_SIZE - 1)) & PAGE_MASK)
+
+
+struct prom_pmemblock * __init prom_getmdesc(void)
+{
+	unsigned int memsize;
+
+	memsize = 0x02000000;
+	prom_printf("Setting default memory size 0x%08x\n", memsize);
+
+	memset(mdesc, 0, sizeof(mdesc));
+
+	mdesc[0].type = simmem_reserved;
+	mdesc[0].base = 0x00000000;
+	mdesc[0].size = 0x00001000;
+
+	mdesc[1].type = simmem_free;
+	mdesc[1].base = 0x00001000;
+	mdesc[1].size = 0x000ff000;
+
+	mdesc[2].type = simmem_reserved;
+	mdesc[2].base = 0x00100000;
+	mdesc[2].size = CPHYSADDR(PFN_ALIGN(&_end)) - mdesc[2].base;
+
+	mdesc[3].type = simmem_free;
+	mdesc[3].base = CPHYSADDR(PFN_ALIGN(&_end));
+	mdesc[3].size = memsize - mdesc[3].base;
+
+	return &mdesc[0];
+}
+
+static int __init prom_memtype_classify (unsigned int type)
+{
+	switch (type) {
+	case simmem_free:
+		return BOOT_MEM_RAM;
+	case simmem_reserved:
+	default:
+		return BOOT_MEM_RESERVED;
+	}
+}
+
+void __init prom_meminit(void)
+{
+	struct prom_pmemblock *p;
+
+	p = prom_getmdesc();
+
+	while (p->size) {
+		long type;
+		unsigned long base, size;
+
+		type = prom_memtype_classify (p->type);
+		base = p->base;
+		size = p->size;
+
+		add_memory_region(base, size, type);
+                p++;
+	}
+}
+
+unsigned long __init prom_free_prom_memory(void)
+{
+	int i;
+	unsigned long freed = 0;
+	unsigned long addr;
+
+	for (i = 0; i < boot_mem_map.nr_map; i++) {
+		if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA)
+			continue;
+
+		addr = boot_mem_map.map[i].addr;
+		while (addr < boot_mem_map.map[i].addr
+			      + boot_mem_map.map[i].size) {
+			ClearPageReserved(virt_to_page(__va(addr)));
+			set_page_count(virt_to_page(__va(addr)), 1);
+			free_page((unsigned long)__va(addr));
+			addr += PAGE_SIZE;
+			freed += PAGE_SIZE;
+		}
+	}
+	printk("Freeing prom memory: %ldkb freed\n", freed >> 10);
+
+	return freed;
+}
diff --git a/arch/mips/mips-boards/sim/sim_printf.c b/arch/mips/mips-boards/sim/sim_printf.c
new file mode 100644
index 000000000000..3ee5a0b501a6
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_printf.c
@@ -0,0 +1,74 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Putting things on the screen/serial line using YAMONs facilities.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/serial_reg.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+static inline unsigned int serial_in(int offset)
+{
+	return inb(0x3f8 + offset);
+}
+
+static inline void serial_out(int offset, int value)
+{
+	outb(value, 0x3f8 + offset);
+}
+
+int putPromChar(char c)
+{
+	while ((serial_in(UART_LSR) & UART_LSR_THRE) == 0)
+		;
+
+	serial_out(UART_TX, c);
+
+	return 1;
+}
+
+char getPromChar(void)
+{
+	while (!(serial_in(UART_LSR) & 1))
+		;
+
+	return serial_in(UART_RX);
+}
+
+void prom_printf(char *fmt, ...)
+{
+	va_list args;
+	int l;
+	char *p, *buf_end;
+	char buf[1024];
+
+	va_start(args, fmt);
+	l = vsprintf(buf, fmt, args); /* hopefully i < sizeof(buf) */
+	va_end(args);
+
+	buf_end = buf + l;
+
+	for (p = buf; p < buf_end; p++) {
+		/* Crude cr/nl handling is better than none */
+		if (*p == '\n')
+			putPromChar('\r');
+		putPromChar(*p);
+	}
+}
diff --git a/arch/mips/mips-boards/sim/sim_setup.c b/arch/mips/mips-boards/sim/sim_setup.c
new file mode 100644
index 000000000000..485d5a58d9cf
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_setup.c
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+
+#include <asm/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/mips-boards/generic.h>
+#include <asm/mips-boards/prom.h>
+#include <asm/serial.h>
+#include <asm/io.h>
+#include <asm/time.h>
+#include <asm/mips-boards/sim.h>
+#include <asm/mips-boards/simint.h>
+
+
+extern void sim_time_init(void);
+extern void sim_timer_setup(struct irqaction *irq);
+static void __init serial_init(void);
+unsigned int _isbonito = 0;
+
+extern void __init sanitize_tlb_entries(void);
+
+
+const char *get_system_type(void)
+{
+	return "MIPSsim";
+}
+
+void __init plat_setup(void)
+{
+	set_io_port_base(0xbfd00000);
+
+	serial_init();
+
+	board_time_init = sim_time_init;
+	board_timer_setup = sim_timer_setup;
+	prom_printf("Linux started...\n");
+
+#ifdef CONFIG_MT_SMP
+	sanitize_tlb_entries();
+#endif
+}
+
+void prom_init(void)
+{
+	set_io_port_base(0xbfd00000);
+
+	prom_printf("\nLINUX started...\n");
+	prom_init_cmdline();
+	prom_meminit();
+}
+
+
+static void __init serial_init(void)
+{
+#ifdef CONFIG_SERIAL_8250
+	struct uart_port s;
+
+	memset(&s, 0, sizeof(s));
+
+	s.iobase = 0x3f8;
+
+	/* hardware int 4 - the serial int, is CPU int 6
+	 but poll for now */
+	s.irq =  0;
+	s.uartclk = BASE_BAUD * 16;
+	s.flags = ASYNC_BOOT_AUTOCONF | UPF_SKIP_TEST;
+	s.iotype = SERIAL_IO_PORT | ASYNC_SKIP_TEST;
+	s.regshift = 0;
+	s.timeout = 4;
+
+	if (early_serial_setup(&s) != 0) {
+		prom_printf(KERN_ERR "Serial setup failed!\n");
+	}
+
+#endif
+}
diff --git a/arch/mips/mips-boards/sim/sim_smp.c b/arch/mips/mips-boards/sim/sim_smp.c
new file mode 100644
index 000000000000..19824359f5de
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_smp.c
@@ -0,0 +1,151 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+/*
+ * Simulator Platform-specific hooks for SMP operation
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+#include <asm/atomic.h>
+#include <asm/cpu.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/hardirq.h>
+#include <asm/mmu_context.h>
+#include <asm/smp.h>
+#ifdef CONFIG_MIPS_MT_SMTC
+#include <asm/smtc_ipi.h>
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+/* VPE/SMP Prototype implements platform interfaces directly */
+#if !defined(CONFIG_MIPS_MT_SMP)
+
+/*
+ * Cause the specified action to be performed on a targeted "CPU"
+ */
+
+void core_send_ipi(int cpu, unsigned int action)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+	void smtc_send_ipi(int, int, unsigned int);
+
+	smtc_send_ipi(cpu, LINUX_SMP_IPI, action);
+#endif /* CONFIG_MIPS_MT_SMTC */
+/* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */
+
+}
+
+/*
+ * Detect available CPUs/VPEs/TCs and populate phys_cpu_present_map
+ */
+
+void __init prom_build_cpu_map(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+	extern int mipsmt_build_cpu_map(int startslot);
+	int nextslot;
+
+	cpus_clear(phys_cpu_present_map);
+
+	/* Register the boot CPU */
+
+	smp_prepare_boot_cpu();
+
+	/*
+	 * As of November, 2004, MIPSsim only simulates one core
+	 * at a time.  However, that core may be a MIPS MT core
+	 * with multiple virtual processors and thread contexts.
+	 */
+
+	if (read_c0_config3() & (1<<2)) {
+		nextslot = mipsmt_build_cpu_map(1);
+	}
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+
+/*
+ * Platform "CPU" startup hook
+ */
+
+void prom_boot_secondary(int cpu, struct task_struct *idle)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+	extern void smtc_boot_secondary(int cpu, struct task_struct *t);
+
+	smtc_boot_secondary(cpu, idle);
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+
+/*
+ * Post-config but pre-boot cleanup entry point
+ */
+
+void prom_init_secondary(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+	void smtc_init_secondary(void);
+
+	smtc_init_secondary();
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+
+/*
+ * Platform SMP pre-initialization
+ */
+
+void prom_prepare_cpus(unsigned int max_cpus)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+	void mipsmt_prepare_cpus(int c);
+	/*
+ 	 * As noted above, we can assume a single CPU for now
+	 * but it may be multithreaded.
+	 */
+
+	if (read_c0_config3() & (1<<2)) {
+		mipsmt_prepare_cpus(max_cpus);
+	}
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+
+/*
+ * SMP initialization finalization entry point
+ */
+
+void prom_smp_finish(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+	void smtc_smp_finish(void);
+
+	smtc_smp_finish();
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+
+/*
+ * Hook for after all CPUs are online
+ */
+
+void prom_cpus_done(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+#endif /* CONFIG_MIPS32R2_MT_SMP */
diff --git a/arch/mips/mips-boards/sim/sim_time.c b/arch/mips/mips-boards/sim/sim_time.c
new file mode 100644
index 000000000000..18b968c696d1
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_time.c
@@ -0,0 +1,215 @@
+#include <linux/types.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+
+#include <asm/mipsregs.h>
+#include <asm/ptrace.h>
+#include <asm/hardirq.h>
+#include <asm/div64.h>
+#include <asm/cpu.h>
+#include <asm/time.h>
+
+#include <linux/interrupt.h>
+#include <linux/mc146818rtc.h>
+#include <linux/timex.h>
+#include <asm/mipsregs.h>
+#include <asm/ptrace.h>
+#include <asm/hardirq.h>
+#include <asm/irq.h>
+#include <asm/div64.h>
+#include <asm/cpu.h>
+#include <asm/time.h>
+#include <asm/mc146818-time.h>
+#include <asm/msc01_ic.h>
+
+#include <asm/mips-boards/generic.h>
+#include <asm/mips-boards/prom.h>
+#include <asm/mips-boards/simint.h>
+#include <asm/mc146818-time.h>
+#include <asm/smp.h>
+
+
+unsigned long cpu_khz;
+
+extern asmlinkage void ll_local_timer_interrupt(int irq, struct pt_regs *regs);
+
+irqreturn_t sim_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+#ifdef CONFIG_SMP
+	int cpu = smp_processor_id();
+
+	/*
+	 * CPU 0 handles the global timer interrupt job
+	 * resets count/compare registers to trigger next timer int.
+	 */
+#ifndef CONFIG_MIPS_MT_SMTC
+	if (cpu == 0) {
+		timer_interrupt(irq, dev_id, regs);
+	}
+	else {
+		/* Everyone else needs to reset the timer int here as
+		   ll_local_timer_interrupt doesn't */
+		/*
+		 * FIXME: need to cope with counter underflow.
+		 * More support needs to be added to kernel/time for
+		 * counter/timer interrupts on multiple CPU's
+		 */
+		write_c0_compare (read_c0_count() + ( mips_hpt_frequency/HZ));
+	}
+#else /* SMTC */
+	/*
+	 *  In SMTC system, one Count/Compare set exists per VPE.
+	 *  Which TC within a VPE gets the interrupt is essentially
+	 *  random - we only know that it shouldn't be one with
+	 *  IXMT set. Whichever TC gets the interrupt needs to
+	 *  send special interprocessor interrupts to the other
+	 *  TCs to make sure that they schedule, etc.
+	 *
+	 *  That code is specific to the SMTC kernel, not to
+	 *  the simulation platform, so it's invoked from
+	 *  the general MIPS timer_interrupt routine.
+	 *
+	 * We have a problem in that the interrupt vector code
+	 * had to turn off the timer IM bit to avoid redundant
+	 * entries, but we may never get to mips_cpu_irq_end
+	 * to turn it back on again if the scheduler gets
+	 * involved.  So we clear the pending timer here,
+	 * and re-enable the mask...
+	 */
+
+	int vpflags = dvpe();
+	write_c0_compare (read_c0_count() - 1);
+	clear_c0_cause(0x100 << MIPSCPU_INT_CPUCTR);
+	set_c0_status(0x100 << MIPSCPU_INT_CPUCTR);
+	irq_enable_hazard();
+	evpe(vpflags);
+
+	if(cpu_data[cpu].vpe_id == 0) timer_interrupt(irq, dev_id, regs);
+	else write_c0_compare (read_c0_count() + ( mips_hpt_frequency/HZ));
+	smtc_timer_broadcast(cpu_data[cpu].vpe_id);
+
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+	/*
+	 * every CPU should do profiling and process accounting
+	 */
+ 	local_timer_interrupt (irq, dev_id, regs);
+	return IRQ_HANDLED;
+#else
+	return timer_interrupt (irq, dev_id, regs);
+#endif
+}
+
+
+
+/*
+ * Estimate CPU frequency.  Sets mips_counter_frequency as a side-effect
+ */
+static unsigned int __init estimate_cpu_frequency(void)
+{
+	unsigned int prid = read_c0_prid() & 0xffff00;
+	unsigned int count;
+
+#if 1
+	/*
+	 * hardwire the board frequency to 12MHz.
+	 */
+
+	if ((prid == (PRID_COMP_MIPS | PRID_IMP_20KC)) ||
+	    (prid == (PRID_COMP_MIPS | PRID_IMP_25KF)))
+		count = 12000000;
+	else
+		count =  6000000;
+#else
+	unsigned int flags;
+
+	local_irq_save(flags);
+
+	/* Start counter exactly on falling edge of update flag */
+	while (CMOS_READ(RTC_REG_A) & RTC_UIP);
+	while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
+
+	/* Start r4k counter. */
+	write_c0_count(0);
+
+	/* Read counter exactly on falling edge of update flag */
+	while (CMOS_READ(RTC_REG_A) & RTC_UIP);
+	while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
+
+	count = read_c0_count();
+
+	/* restore interrupts */
+	local_irq_restore(flags);
+#endif
+
+	mips_hpt_frequency = count;
+
+	if ((prid != (PRID_COMP_MIPS | PRID_IMP_20KC)) &&
+	    (prid != (PRID_COMP_MIPS | PRID_IMP_25KF)))
+		count *= 2;
+
+	count += 5000;    /* round */
+	count -= count%10000;
+
+	return count;
+}
+
+void __init sim_time_init(void)
+{
+	unsigned int est_freq, flags;
+
+	local_irq_save(flags);
+
+
+        /* Set Data mode - binary. */
+	CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL);
+
+
+	est_freq = estimate_cpu_frequency ();
+
+	printk("CPU frequency %d.%02d MHz\n", est_freq/1000000,
+	       (est_freq%1000000)*100/1000000);
+
+        cpu_khz = est_freq / 1000;
+
+	local_irq_restore(flags);
+}
+
+static int mips_cpu_timer_irq;
+
+static void mips_timer_dispatch (struct pt_regs *regs)
+{
+	do_IRQ (mips_cpu_timer_irq, regs);
+}
+
+
+void __init sim_timer_setup(struct irqaction *irq)
+{
+	if (cpu_has_veic) {
+		set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch);
+		mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR;
+	}
+	else {
+		if (cpu_has_vint)
+			set_vi_handler(MIPSCPU_INT_CPUCTR, mips_timer_dispatch);
+		mips_cpu_timer_irq = MIPSCPU_INT_BASE + MIPSCPU_INT_CPUCTR;
+	}
+
+	/* we are using the cpu counter for timer interrupts */
+	irq->handler = sim_timer_interrupt;
+	setup_irq(mips_cpu_timer_irq, irq);
+
+#ifdef CONFIG_SMP
+	/* irq_desc(riptor) is a global resource, when the interrupt overlaps
+	   on seperate cpu's the first one tries to handle the second interrupt.
+	   The effect is that the int remains disabled on the second cpu.
+	   Mark the interrupt with IRQ_PER_CPU to avoid any confusion */
+	irq_desc[mips_cpu_timer_irq].status |= IRQ_PER_CPU;
+#endif
+
+	/* to generate the first timer interrupt */
+	write_c0_compare(read_c0_count() + (mips_hpt_frequency/HZ));
+}
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index b56a0abdc3d4..b0178da019f0 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -22,7 +22,7 @@ obj-$(CONFIG_CPU_R8000)		+= c-r4k.o cex-gen.o pg-r4k.o tlb-r8k.o
 obj-$(CONFIG_CPU_RM7000)	+= c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
 obj-$(CONFIG_CPU_RM9000)	+= c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
 obj-$(CONFIG_CPU_SB1)		+= c-sb1.o cerr-sb1.o cex-sb1.o pg-sb1.o \
-				   tlb-sb1.o
+				   tlb-r4k.o
 obj-$(CONFIG_CPU_TX39XX)	+= c-tx39.o pg-r4k.o tlb-r3k.o
 obj-$(CONFIG_CPU_TX49XX)	+= c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
 obj-$(CONFIG_CPU_VR41XX)	+= c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c
index c659f99eb39a..27f4fa25e8c9 100644
--- a/arch/mips/mm/c-r3k.c
+++ b/arch/mips/mm/c-r3k.c
@@ -221,12 +221,14 @@ static inline unsigned long get_phys_page (unsigned long addr,
 					   struct mm_struct *mm)
 {
 	pgd_t *pgd;
+	pud_t *pud;
 	pmd_t *pmd;
 	pte_t *pte;
 	unsigned long physpage;
 
 	pgd = pgd_offset(mm, addr);
-	pmd = pmd_offset(pgd, addr);
+	pud = pud_offset(pgd, addr);
+	pmd = pmd_offset(pud, addr);
 	pte = pte_offset(pmd, addr);
 
 	if ((physpage = pte_val(*pte)) & _PAGE_VALID)
@@ -317,7 +319,7 @@ static void r3k_dma_cache_wback_inv(unsigned long start, unsigned long size)
 	r3k_flush_dcache_range(start, start + size);
 }
 
-void __init ld_mmu_r23000(void)
+void __init r3k_cache_init(void)
 {
 	extern void build_clear_page(void);
 	extern void build_copy_page(void);
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 5ea84bc98c6a..38223b44d962 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -16,6 +16,7 @@
 
 #include <asm/bcache.h>
 #include <asm/bootinfo.h>
+#include <asm/cache.h>
 #include <asm/cacheops.h>
 #include <asm/cpu.h>
 #include <asm/cpu-features.h>
@@ -26,8 +27,14 @@
 #include <asm/system.h>
 #include <asm/mmu_context.h>
 #include <asm/war.h>
+#include <asm/cacheflush.h> /* for run_uncached() */
 
-static unsigned long icache_size, dcache_size, scache_size;
+/*
+ * Must die.
+ */
+static unsigned long icache_size __read_mostly;
+static unsigned long dcache_size __read_mostly;
+static unsigned long scache_size __read_mostly;
 
 /*
  * Dummy cache handling routines for machines without boardcaches
@@ -43,8 +50,8 @@ static struct bcache_ops no_sc_ops = {
 
 struct bcache_ops *bcops = &no_sc_ops;
 
-#define cpu_is_r4600_v1_x()	((read_c0_prid() & 0xfffffff0) == 0x2010)
-#define cpu_is_r4600_v2_x()	((read_c0_prid() & 0xfffffff0) == 0x2020)
+#define cpu_is_r4600_v1_x()	((read_c0_prid() & 0xfffffff0) == 0x00002010)
+#define cpu_is_r4600_v2_x()	((read_c0_prid() & 0xfffffff0) == 0x00002020)
 
 #define R4600_HIT_CACHEOP_WAR_IMPL					\
 do {									\
@@ -190,12 +197,12 @@ static inline void r4k_blast_icache_page_indexed_setup(void)
 	if (ic_lsize == 16)
 		r4k_blast_icache_page_indexed = blast_icache16_page_indexed;
 	else if (ic_lsize == 32) {
-		if (TX49XX_ICACHE_INDEX_INV_WAR)
-			r4k_blast_icache_page_indexed =
-				tx49_blast_icache32_page_indexed;
-		else if (R4600_V1_INDEX_ICACHEOP_WAR && cpu_is_r4600_v1_x())
+		if (R4600_V1_INDEX_ICACHEOP_WAR && cpu_is_r4600_v1_x())
 			r4k_blast_icache_page_indexed =
 				blast_icache32_r4600_v1_page_indexed;
+		else if (TX49XX_ICACHE_INDEX_INV_WAR)
+			r4k_blast_icache_page_indexed =
+				tx49_blast_icache32_page_indexed;
 		else
 			r4k_blast_icache_page_indexed =
 				blast_icache32_page_indexed;
@@ -361,24 +368,33 @@ static void r4k_flush_cache_mm(struct mm_struct *mm)
 
 struct flush_cache_page_args {
 	struct vm_area_struct *vma;
-	unsigned long page;
+	unsigned long addr;
 };
 
 static inline void local_r4k_flush_cache_page(void *args)
 {
 	struct flush_cache_page_args *fcp_args = args;
 	struct vm_area_struct *vma = fcp_args->vma;
-	unsigned long page = fcp_args->page;
+	unsigned long addr = fcp_args->addr;
 	int exec = vma->vm_flags & VM_EXEC;
 	struct mm_struct *mm = vma->vm_mm;
 	pgd_t *pgdp;
+	pud_t *pudp;
 	pmd_t *pmdp;
 	pte_t *ptep;
 
-	page &= PAGE_MASK;
-	pgdp = pgd_offset(mm, page);
-	pmdp = pmd_offset(pgdp, page);
-	ptep = pte_offset(pmdp, page);
+	/*
+	 * If ownes no valid ASID yet, cannot possibly have gotten
+	 * this page into the cache.
+	 */
+	if (cpu_context(smp_processor_id(), mm) == 0)
+		return;
+
+	addr &= PAGE_MASK;
+	pgdp = pgd_offset(mm, addr);
+	pudp = pud_offset(pgdp, addr);
+	pmdp = pmd_offset(pudp, addr);
+	ptep = pte_offset(pmdp, addr);
 
 	/*
 	 * If the page isn't marked valid, the page cannot possibly be
@@ -395,12 +411,12 @@ static inline void local_r4k_flush_cache_page(void *args)
 	 */
 	if ((mm == current->active_mm) && (pte_val(*ptep) & _PAGE_VALID)) {
 		if (cpu_has_dc_aliases || (exec && !cpu_has_ic_fills_f_dc)) {
-			r4k_blast_dcache_page(page);
+			r4k_blast_dcache_page(addr);
 			if (exec && !cpu_icache_snoops_remote_store)
-				r4k_blast_scache_page(page);
+				r4k_blast_scache_page(addr);
 		}
 		if (exec)
-			r4k_blast_icache_page(page);
+			r4k_blast_icache_page(addr);
 
 		return;
 	}
@@ -409,36 +425,30 @@ static inline void local_r4k_flush_cache_page(void *args)
 	 * Do indexed flush, too much work to get the (possible) TLB refills
 	 * to work correctly.
 	 */
-	page = INDEX_BASE + (page & (dcache_size - 1));
+	addr = INDEX_BASE + (addr & (dcache_size - 1));
 	if (cpu_has_dc_aliases || (exec && !cpu_has_ic_fills_f_dc)) {
-		r4k_blast_dcache_page_indexed(page);
+		r4k_blast_dcache_page_indexed(addr);
 		if (exec && !cpu_icache_snoops_remote_store)
-			r4k_blast_scache_page_indexed(page);
+			r4k_blast_scache_page_indexed(addr);
 	}
 	if (exec) {
 		if (cpu_has_vtag_icache) {
 			int cpu = smp_processor_id();
 
-			if (cpu_context(cpu, vma->vm_mm) != 0)
-				drop_mmu_context(vma->vm_mm, cpu);
+			if (cpu_context(cpu, mm) != 0)
+				drop_mmu_context(mm, cpu);
 		} else
-			r4k_blast_icache_page_indexed(page);
+			r4k_blast_icache_page_indexed(addr);
 	}
 }
 
-static void r4k_flush_cache_page(struct vm_area_struct *vma, unsigned long page, unsigned long pfn)
+static void r4k_flush_cache_page(struct vm_area_struct *vma,
+	unsigned long addr, unsigned long pfn)
 {
 	struct flush_cache_page_args args;
 
-	/*
-	 * If ownes no valid ASID yet, cannot possibly have gotten
-	 * this page into the cache.
-	 */
-	if (cpu_context(smp_processor_id(), vma->vm_mm) == 0)
-		return;
-
 	args.vma = vma;
-	args.page = page;
+	args.addr = addr;
 
 	on_each_cpu(local_r4k_flush_cache_page, &args, 1, 1);
 }
@@ -454,16 +464,16 @@ static void r4k_flush_data_cache_page(unsigned long addr)
 }
 
 struct flush_icache_range_args {
-	unsigned long start;
-	unsigned long end;
+	unsigned long __user start;
+	unsigned long __user end;
 };
 
 static inline void local_r4k_flush_icache_range(void *args)
 {
 	struct flush_icache_range_args *fir_args = args;
-	unsigned long dc_lsize = current_cpu_data.dcache.linesz;
-	unsigned long ic_lsize = current_cpu_data.icache.linesz;
-	unsigned long sc_lsize = current_cpu_data.scache.linesz;
+	unsigned long dc_lsize = cpu_dcache_line_size();
+	unsigned long ic_lsize = cpu_icache_line_size();
+	unsigned long sc_lsize = cpu_scache_line_size();
 	unsigned long start = fir_args->start;
 	unsigned long end = fir_args->end;
 	unsigned long addr, aend;
@@ -472,6 +482,7 @@ static inline void local_r4k_flush_icache_range(void *args)
 		if (end - start > dcache_size) {
 			r4k_blast_dcache();
 		} else {
+			R4600_HIT_CACHEOP_WAR_IMPL;
 			addr = start & ~(dc_lsize - 1);
 			aend = (end - 1) & ~(dc_lsize - 1);
 
@@ -492,7 +503,7 @@ static inline void local_r4k_flush_icache_range(void *args)
 				aend = (end - 1) & ~(sc_lsize - 1);
 
 				while (1) {
-					/* Hit_Writeback_Inv_D */
+					/* Hit_Writeback_Inv_SD */
 					protected_writeback_scache_line(addr);
 					if (addr == aend)
 						break;
@@ -517,7 +528,8 @@ static inline void local_r4k_flush_icache_range(void *args)
 	}
 }
 
-static void r4k_flush_icache_range(unsigned long start, unsigned long end)
+static void r4k_flush_icache_range(unsigned long __user start,
+	unsigned long __user end)
 {
 	struct flush_icache_range_args args;
 
@@ -525,6 +537,7 @@ static void r4k_flush_icache_range(unsigned long start, unsigned long end)
 	args.end = end;
 
 	on_each_cpu(local_r4k_flush_icache_range, &args, 1, 1);
+	instruction_hazard();
 }
 
 /*
@@ -613,7 +626,7 @@ static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size)
 	BUG_ON(size == 0);
 
 	if (cpu_has_subset_pcaches) {
-		unsigned long sc_lsize = current_cpu_data.scache.linesz;
+		unsigned long sc_lsize = cpu_scache_line_size();
 
 		if (size >= scache_size) {
 			r4k_blast_scache();
@@ -639,7 +652,7 @@ static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size)
 	if (size >= dcache_size) {
 		r4k_blast_dcache();
 	} else {
-		unsigned long dc_lsize = current_cpu_data.dcache.linesz;
+		unsigned long dc_lsize = cpu_dcache_line_size();
 
 		R4600_HIT_CACHEOP_WAR_IMPL;
 		a = addr & ~(dc_lsize - 1);
@@ -663,7 +676,7 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size)
 	BUG_ON(size == 0);
 
 	if (cpu_has_subset_pcaches) {
-		unsigned long sc_lsize = current_cpu_data.scache.linesz;
+		unsigned long sc_lsize = cpu_scache_line_size();
 
 		if (size >= scache_size) {
 			r4k_blast_scache();
@@ -684,7 +697,7 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size)
 	if (size >= dcache_size) {
 		r4k_blast_dcache();
 	} else {
-		unsigned long dc_lsize = current_cpu_data.dcache.linesz;
+		unsigned long dc_lsize = cpu_dcache_line_size();
 
 		R4600_HIT_CACHEOP_WAR_IMPL;
 		a = addr & ~(dc_lsize - 1);
@@ -708,9 +721,9 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size)
  */
 static void local_r4k_flush_cache_sigtramp(void * arg)
 {
-	unsigned long ic_lsize = current_cpu_data.icache.linesz;
-	unsigned long dc_lsize = current_cpu_data.dcache.linesz;
-	unsigned long sc_lsize = current_cpu_data.scache.linesz;
+	unsigned long ic_lsize = cpu_icache_line_size();
+	unsigned long dc_lsize = cpu_dcache_line_size();
+	unsigned long sc_lsize = cpu_scache_line_size();
 	unsigned long addr = (unsigned long) arg;
 
 	R4600_HIT_CACHEOP_WAR_IMPL;
@@ -762,6 +775,7 @@ static inline void rm7k_erratum31(void)
 
 	for (addr = INDEX_BASE; addr <= INDEX_BASE + 4096; addr += ic_lsize) {
 		__asm__ __volatile__ (
+			".set push\n\t"
 			".set noreorder\n\t"
 			".set mips3\n\t"
 			"cache\t%1, 0(%0)\n\t"
@@ -776,8 +790,7 @@ static inline void rm7k_erratum31(void)
 			"cache\t%1, 0x1000(%0)\n\t"
 			"cache\t%1, 0x2000(%0)\n\t"
 			"cache\t%1, 0x3000(%0)\n\t"
-			".set\tmips0\n\t"
-			".set\treorder\n\t"
+			".set pop\n"
 			:
 			: "r" (addr), "i" (Index_Store_Tag_I), "i" (Fill));
 	}
@@ -1011,9 +1024,19 @@ static void __init probe_pcache(void)
 	 * normally they'd suffer from aliases but magic in the hardware deals
 	 * with that for us so we don't need to take care ourselves.
 	 */
-	if (c->cputype != CPU_R10000 && c->cputype != CPU_R12000)
-		if (c->dcache.waysize > PAGE_SIZE)
-		        c->dcache.flags |= MIPS_CACHE_ALIASES;
+	switch (c->cputype) {
+	case CPU_20KC:
+	case CPU_25KF:
+	case CPU_R10000:
+	case CPU_R12000:
+	case CPU_SB1:
+		break;
+	case CPU_24K:
+		if (!(read_c0_config7() & (1 << 16)))
+	default:
+			if (c->dcache.waysize > PAGE_SIZE)
+				c->dcache.flags |= MIPS_CACHE_ALIASES;
+	}
 
 	switch (c->cputype) {
 	case CPU_20KC:
@@ -1024,7 +1047,11 @@ static void __init probe_pcache(void)
 		c->icache.flags |= MIPS_CACHE_VTAG;
 		break;
 
+	case CPU_AU1000:
 	case CPU_AU1500:
+	case CPU_AU1100:
+	case CPU_AU1550:
+	case CPU_AU1200:
 		c->icache.flags |= MIPS_CACHE_IC_F_DC;
 		break;
 	}
@@ -1102,7 +1129,6 @@ static int __init probe_scache(void)
 	return 1;
 }
 
-typedef int (*probe_func_t)(unsigned long);
 extern int r5k_sc_init(void);
 extern int rm7k_sc_init(void);
 
@@ -1110,7 +1136,6 @@ static void __init setup_scache(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
 	unsigned int config = read_c0_config();
-	probe_func_t probe_scache_kseg1;
 	int sc_present = 0;
 
 	/*
@@ -1123,8 +1148,7 @@ static void __init setup_scache(void)
 	case CPU_R4000MC:
 	case CPU_R4400SC:
 	case CPU_R4400MC:
-		probe_scache_kseg1 = (probe_func_t) (CKSEG1ADDR(&probe_scache));
-		sc_present = probe_scache_kseg1(config);
+		sc_present = run_uncached(probe_scache);
 		if (sc_present)
 			c->options |= MIPS_CPU_CACHE_CDEX_S;
 		break;
@@ -1198,7 +1222,7 @@ static inline void coherency_setup(void)
 	}
 }
 
-void __init ld_mmu_r4xx0(void)
+void __init r4k_cache_init(void)
 {
 	extern void build_clear_page(void);
 	extern void build_copy_page(void);
@@ -1206,15 +1230,11 @@ void __init ld_mmu_r4xx0(void)
 	struct cpuinfo_mips *c = &current_cpu_data;
 
 	/* Default cache error handler for R4000 and R5000 family */
-	memcpy((void *)(CAC_BASE   + 0x100), &except_vec2_generic, 0x80);
-	memcpy((void *)(UNCAC_BASE + 0x100), &except_vec2_generic, 0x80);
+	set_uncached_handler (0x100, &except_vec2_generic, 0x80);
 
 	probe_pcache();
 	setup_scache();
 
-	if (c->dcache.sets * c->dcache.ways > PAGE_SIZE)
-		c->dcache.flags |= MIPS_CACHE_ALIASES;
-
 	r4k_blast_dcache_page_setup();
 	r4k_blast_dcache_page_indexed_setup();
 	r4k_blast_dcache_setup();
@@ -1252,9 +1272,8 @@ void __init ld_mmu_r4xx0(void)
 	_dma_cache_inv		= r4k_dma_cache_inv;
 #endif
 
-	__flush_cache_all();
-	coherency_setup();
-
 	build_clear_page();
 	build_copy_page();
+	local_r4k___flush_cache_all(NULL);
+	coherency_setup();
 }
diff --git a/arch/mips/mm/c-sb1.c b/arch/mips/mm/c-sb1.c
index 502f68c664b2..2f08b535f20e 100644
--- a/arch/mips/mm/c-sb1.c
+++ b/arch/mips/mm/c-sb1.c
@@ -235,7 +235,7 @@ static inline void __sb1_flush_icache_range(unsigned long start,
 /*
  * Invalidate all caches on this CPU
  */
-static void local_sb1___flush_cache_all(void)
+static void __attribute_used__ local_sb1___flush_cache_all(void)
 {
 	__sb1_writeback_inv_dcache_all();
 	__sb1_flush_icache_all();
@@ -492,19 +492,17 @@ static __init void probe_cache_sizes(void)
 }
 
 /*
- * This is called from loadmmu.c.  We have to set up all the
+ * This is called from cache.c.  We have to set up all the
  * memory management function pointers, as well as initialize
  * the caches and tlbs
  */
-void ld_mmu_sb1(void)
+void sb1_cache_init(void)
 {
 	extern char except_vec2_sb1;
 	extern char handle_vec2_sb1;
 
 	/* Special cache error handler for SB1 */
-	memcpy((void *)(CAC_BASE   + 0x100), &except_vec2_sb1, 0x80);
-	memcpy((void *)(UNCAC_BASE + 0x100), &except_vec2_sb1, 0x80);
-	memcpy((void *)CKSEG1ADDR(&handle_vec2_sb1), &handle_vec2_sb1, 0x80);
+	set_uncached_handler (0x100, &except_vec2_sb1, 0x80);
 
 	probe_cache_sizes();
 
diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c
index ff5afab64b2f..0a97a9434eba 100644
--- a/arch/mips/mm/c-tx39.c
+++ b/arch/mips/mm/c-tx39.c
@@ -167,15 +167,16 @@ static void tx39_flush_cache_mm(struct mm_struct *mm)
 static void tx39_flush_cache_range(struct vm_area_struct *vma,
 	unsigned long start, unsigned long end)
 {
-	struct mm_struct *mm = vma->vm_mm;
+	int exec;
 
-	if (!cpu_has_dc_aliases)
+	if (!(cpu_context(smp_processor_id(), vma->vm_mm)))
 		return;
 
-	if (cpu_context(smp_processor_id(), mm) != 0) {
+	exec = vma->vm_flags & VM_EXEC;
+	if (cpu_has_dc_aliases || exec)
 		tx39_blast_dcache();
+	if (exec)
 		tx39_blast_icache();
-	}
 }
 
 static void tx39_flush_cache_page(struct vm_area_struct *vma, unsigned long page, unsigned long pfn)
@@ -183,6 +184,7 @@ static void tx39_flush_cache_page(struct vm_area_struct *vma, unsigned long page
 	int exec = vma->vm_flags & VM_EXEC;
 	struct mm_struct *mm = vma->vm_mm;
 	pgd_t *pgdp;
+	pud_t *pudp;
 	pmd_t *pmdp;
 	pte_t *ptep;
 
@@ -195,7 +197,8 @@ static void tx39_flush_cache_page(struct vm_area_struct *vma, unsigned long page
 
 	page &= PAGE_MASK;
 	pgdp = pgd_offset(mm, page);
-	pmdp = pmd_offset(pgdp, page);
+	pudp = pud_offset(pgdp, page);
+	pmdp = pmd_offset(pudp, page);
 	ptep = pte_offset(pmdp, page);
 
 	/*
@@ -407,7 +410,7 @@ static __init void tx39_probe_cache(void)
 	}
 }
 
-void __init ld_mmu_tx39(void)
+void __init tx39_cache_init(void)
 {
 	extern void build_clear_page(void);
 	extern void build_copy_page(void);
@@ -490,4 +493,5 @@ void __init ld_mmu_tx39(void)
 
 	build_clear_page();
 	build_copy_page();
+	tx39h_flush_icache_all();
 }
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index 1d95cdb77bed..314701a66b13 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -23,8 +23,10 @@ void (*__flush_cache_all)(void);
 void (*flush_cache_mm)(struct mm_struct *mm);
 void (*flush_cache_range)(struct vm_area_struct *vma, unsigned long start,
 	unsigned long end);
-void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);
-void (*flush_icache_range)(unsigned long start, unsigned long end);
+void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page,
+	unsigned long pfn);
+void (*flush_icache_range)(unsigned long __user start,
+	unsigned long __user end);
 void (*flush_icache_page)(struct vm_area_struct *vma, struct page *page);
 
 /* MIPS specific cache operations */
@@ -32,6 +34,8 @@ void (*flush_cache_sigtramp)(unsigned long addr);
 void (*flush_data_cache_page)(unsigned long addr);
 void (*flush_icache_all)(void);
 
+EXPORT_SYMBOL(flush_data_cache_page);
+
 #ifdef CONFIG_DMA_NONCOHERENT
 
 /* DMA cache operations. */
@@ -49,10 +53,12 @@ EXPORT_SYMBOL(_dma_cache_inv);
  * We could optimize the case where the cache argument is not BCACHE but
  * that seems very atypical use ...
  */
-asmlinkage int sys_cacheflush(unsigned long addr, unsigned long int bytes,
-	unsigned int cache)
+asmlinkage int sys_cacheflush(unsigned long __user addr,
+	unsigned long bytes, unsigned int cache)
 {
-	if (!access_ok(VERIFY_WRITE, (void *) addr, bytes))
+	if (bytes == 0)
+		return 0;
+	if (!access_ok(VERIFY_WRITE, (void __user *) addr, bytes))
 		return -EFAULT;
 
 	flush_icache_range(addr, addr + bytes);
@@ -100,58 +106,48 @@ void __update_cache(struct vm_area_struct *vma, unsigned long address,
 	}
 }
 
-extern void ld_mmu_r23000(void);
-extern void ld_mmu_r4xx0(void);
-extern void ld_mmu_tx39(void);
-extern void ld_mmu_r6000(void);
-extern void ld_mmu_tfp(void);
-extern void ld_mmu_andes(void);
-extern void ld_mmu_sb1(void);
+#define __weak __attribute__((weak))
+
+static char cache_panic[] __initdata = "Yeee, unsupported cache architecture.";
 
 void __init cpu_cache_init(void)
 {
-	if (cpu_has_4ktlb) {
-#if defined(CONFIG_CPU_R4X00)  || defined(CONFIG_CPU_VR41XX) || \
-    defined(CONFIG_CPU_R4300)  || defined(CONFIG_CPU_R5000)  || \
-    defined(CONFIG_CPU_NEVADA) || defined(CONFIG_CPU_R5432)  || \
-    defined(CONFIG_CPU_R5500)  || defined(CONFIG_CPU_MIPS32) || \
-    defined(CONFIG_CPU_MIPS64) || defined(CONFIG_CPU_TX49XX) || \
-    defined(CONFIG_CPU_RM7000) || defined(CONFIG_CPU_RM9000)
-		ld_mmu_r4xx0();
-#endif
-	} else switch (current_cpu_data.cputype) {
-#ifdef CONFIG_CPU_R3000
-	case CPU_R2000:
-	case CPU_R3000:
-	case CPU_R3000A:
-	case CPU_R3081E:
-		ld_mmu_r23000();
-		break;
-#endif
-#ifdef CONFIG_CPU_TX39XX
-	case CPU_TX3912:
-	case CPU_TX3922:
-	case CPU_TX3927:
-		ld_mmu_tx39();
-		break;
-#endif
-#ifdef CONFIG_CPU_R10000
-	case CPU_R10000:
-	case CPU_R12000:
-		ld_mmu_r4xx0();
-		break;
-#endif
-#ifdef CONFIG_CPU_SB1
-	case CPU_SB1:
-		ld_mmu_sb1();
-		break;
-#endif
-
-	case CPU_R8000:
-		panic("R8000 is unsupported");
-		break;
-
-	default:
-		panic("Yeee, unsupported cache architecture.");
+	if (cpu_has_3k_cache) {
+		extern void __weak r3k_cache_init(void);
+
+		r3k_cache_init();
+		return;
+	}
+	if (cpu_has_6k_cache) {
+		extern void __weak r6k_cache_init(void);
+
+		r6k_cache_init();
+		return;
+	}
+	if (cpu_has_4k_cache) {
+		extern void __weak r4k_cache_init(void);
+
+		r4k_cache_init();
+		return;
 	}
+	if (cpu_has_8k_cache) {
+		extern void __weak r8k_cache_init(void);
+
+		r8k_cache_init();
+		return;
+	}
+	if (cpu_has_tx39_cache) {
+		extern void __weak tx39_cache_init(void);
+
+		tx39_cache_init();
+		return;
+	}
+	if (cpu_has_sb1_cache) {
+		extern void __weak sb1_cache_init(void);
+
+		sb1_cache_init();
+		return;
+	}
+
+	panic(cache_panic);
 }
diff --git a/arch/mips/mm/cerr-sb1.c b/arch/mips/mm/cerr-sb1.c
index 7166ffe63502..1cf3c6006ccd 100644
--- a/arch/mips/mm/cerr-sb1.c
+++ b/arch/mips/mm/cerr-sb1.c
@@ -19,13 +19,19 @@
 #include <linux/sched.h>
 #include <asm/mipsregs.h>
 #include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_regs.h>
 
-#ifndef CONFIG_SIBYTE_BUS_WATCHER
+#if !defined(CONFIG_SIBYTE_BUS_WATCHER) || defined(CONFIG_SIBYTE_BW_TRACE)
 #include <asm/io.h>
-#include <asm/sibyte/sb1250_regs.h>
 #include <asm/sibyte/sb1250_scd.h>
 #endif
 
+/*
+ * We'd like to dump the L2_ECC_TAG register on errors, but errata make
+ * that unsafe... So for now we don't.  (BCM1250/BCM112x erratum SOC-48.)
+ */
+#undef DUMP_L2_ECC_TAG_ON_ERROR
+
 /* SB1 definitions */
 
 /* XXX should come from config1 XXX */
@@ -139,12 +145,18 @@ static inline void breakout_cerrd(unsigned int val)
 static void check_bus_watcher(void)
 {
 	uint32_t status, l2_err, memio_err;
+#ifdef DUMP_L2_ECC_TAG_ON_ERROR
+	uint64_t l2_tag;
+#endif
 
 	/* Destructive read, clears register and interrupt */
 	status = csr_in32(IOADDR(A_SCD_BUS_ERR_STATUS));
 	/* Bit 31 is always on, but there's no #define for that */
 	if (status & ~(1UL << 31)) {
 		l2_err = csr_in32(IOADDR(A_BUS_L2_ERRORS));
+#ifdef DUMP_L2_ECC_TAG_ON_ERROR
+		l2_tag = in64(IO_SPACE_BASE | A_L2_ECC_TAG);
+#endif
 		memio_err = csr_in32(IOADDR(A_BUS_MEM_IO_ERRORS));
 		prom_printf("Bus watcher error counters: %08x %08x\n", l2_err, memio_err);
 		prom_printf("\nLast recorded signature:\n");
@@ -153,6 +165,9 @@ static void check_bus_watcher(void)
 		       (int)(G_SCD_BERR_TID(status) >> 6),
 		       (int)G_SCD_BERR_RID(status),
 		       (int)G_SCD_BERR_DCODE(status));
+#ifdef DUMP_L2_ECC_TAG_ON_ERROR
+		prom_printf("Last L2 tag w/ bad ECC: %016llx\n", l2_tag);
+#endif
 	} else {
 		prom_printf("Bus watcher indicates no error\n");
 	}
@@ -166,6 +181,16 @@ asmlinkage void sb1_cache_error(void)
 	uint64_t cerr_dpa;
 	uint32_t errctl, cerr_i, cerr_d, dpalo, dpahi, eepc, res;
 
+#ifdef CONFIG_SIBYTE_BW_TRACE
+	/* Freeze the trace buffer now */
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+	csr_out32(M_BCM1480_SCD_TRACE_CFG_FREEZE, IO_SPACE_BASE | A_SCD_TRACE_CFG);
+#else
+	csr_out32(M_SCD_TRACE_CFG_FREEZE, IO_SPACE_BASE | A_SCD_TRACE_CFG);
+#endif
+	prom_printf("Trace buffer frozen\n");
+#endif
+
 	prom_printf("Cache error exception on CPU %x:\n",
 		    (read_c0_prid() >> 25) & 0x7);
 
@@ -229,11 +254,19 @@ asmlinkage void sb1_cache_error(void)
 
 	check_bus_watcher();
 
-	while (1);
 	/*
-	 * This tends to make things get really ugly; let's just stall instead.
-	 *    panic("Can't handle the cache error!");
+	 * Calling panic() when a fatal cache error occurs scrambles the
+	 * state of the system (and the cache), making it difficult to
+	 * investigate after the fact.  However, if you just stall the CPU,
+	 * the other CPU may keep on running, which is typically very
+	 * undesirable.
 	 */
+#ifdef CONFIG_SB1_CERR_STALL
+	while (1)
+		;
+#else
+	panic("unhandled cache error");
+#endif
 }
 
 
@@ -434,7 +467,8 @@ static struct dc_state dc_states[] = {
 };
 
 #define DC_TAG_VALID(state) \
-    (((state) == 0xf) || ((state) == 0x13) || ((state) == 0x19) || ((state == 0x16)) || ((state) == 0x1c))
+    (((state) == 0x0) || ((state) == 0xf) || ((state) == 0x13) || \
+     ((state) == 0x19) || ((state) == 0x16) || ((state) == 0x1c))
 
 static char *dc_state_str(unsigned char state)
 {
@@ -505,6 +539,7 @@ static uint32_t extract_dc(unsigned short addr, int data)
 			uint64_t datalo;
 			uint32_t datalohi, datalolo, datahi;
 			int offset;
+			char bad_ecc = 0;
 
 			for (offset = 0; offset < 4; offset++) {
 				/* Index-load-data-D */
@@ -525,8 +560,7 @@ static uint32_t extract_dc(unsigned short addr, int data)
 				ecc = dc_ecc(datalo);
 				if (ecc != datahi) {
 					int bits = 0;
-					prom_printf("  ** bad ECC (%02x %02x) ->",
-						    datahi, ecc);
+					bad_ecc |= 1 << (3-offset);
 					ecc ^= datahi;
 					while (ecc) {
 						if (ecc & 1) bits++;
@@ -537,6 +571,10 @@ static uint32_t extract_dc(unsigned short addr, int data)
 				prom_printf("  %02X-%016llX", datahi, datalo);
 			}
 			prom_printf("\n");
+			if (bad_ecc)
+				prom_printf("  dwords w/ bad ECC: %d %d %d %d\n",
+					    !!(bad_ecc & 8), !!(bad_ecc & 4),
+					    !!(bad_ecc & 2), !!(bad_ecc & 1));
 		}
 	}
 	return res;
diff --git a/arch/mips/mm/cex-sb1.S b/arch/mips/mm/cex-sb1.S
index 2c3a23aa88c3..0e71580774ff 100644
--- a/arch/mips/mm/cex-sb1.S
+++ b/arch/mips/mm/cex-sb1.S
@@ -64,6 +64,10 @@ LEAF(except_vec2_sb1)
 	sd	k0,0x170($0)
 	sd	k1,0x178($0)
 
+#if CONFIG_SB1_CEX_ALWAYS_FATAL
+	j	handle_vec2_sb1
+	 nop
+#else
 	/*
 	 * M_ERRCTL_RECOVERABLE is bit 31, which makes it easy to tell
 	 * if we can fast-path out of here for a h/w-recovered error.
@@ -134,6 +138,7 @@ unrecoverable:
 	/* Unrecoverable Icache or Dcache error; log it and/or fail */
 	j	handle_vec2_sb1
 	 nop
+#endif
 
 END(except_vec2_sb1)
 
diff --git a/arch/mips/mm/dma-coherent.c b/arch/mips/mm/dma-coherent.c
index 97a50d38c98f..f6b3c722230c 100644
--- a/arch/mips/mm/dma-coherent.c
+++ b/arch/mips/mm/dma-coherent.c
@@ -9,16 +9,16 @@
  */
 #include <linux/config.h>
 #include <linux/types.h>
+#include <linux/dma-mapping.h>
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/string.h>
-#include <linux/pci.h>
 
 #include <asm/cache.h>
 #include <asm/io.h>
 
 void *dma_alloc_noncoherent(struct device *dev, size_t size,
-	dma_addr_t * dma_handle, int gfp)
+	dma_addr_t * dma_handle, gfp_t gfp)
 {
 	void *ret;
 	/* ignore region specifiers */
@@ -39,7 +39,7 @@ void *dma_alloc_noncoherent(struct device *dev, size_t size,
 EXPORT_SYMBOL(dma_alloc_noncoherent);
 
 void *dma_alloc_coherent(struct device *dev, size_t size,
-	dma_addr_t * dma_handle, int gfp)
+	dma_addr_t * dma_handle, gfp_t gfp)
 	__attribute__((alias("dma_alloc_noncoherent")));
 
 EXPORT_SYMBOL(dma_alloc_coherent);
diff --git a/arch/mips/mm/dma-ip27.c b/arch/mips/mm/dma-ip27.c
index aa7c94b5d781..8da19fd22ac6 100644
--- a/arch/mips/mm/dma-ip27.c
+++ b/arch/mips/mm/dma-ip27.c
@@ -22,7 +22,7 @@
 	pdev_to_baddr(to_pci_dev(dev), (addr))
 
 void *dma_alloc_noncoherent(struct device *dev, size_t size,
-	dma_addr_t * dma_handle, int gfp)
+	dma_addr_t * dma_handle, gfp_t gfp)
 {
 	void *ret;
 
@@ -44,7 +44,7 @@ void *dma_alloc_noncoherent(struct device *dev, size_t size,
 EXPORT_SYMBOL(dma_alloc_noncoherent);
 
 void *dma_alloc_coherent(struct device *dev, size_t size,
-	dma_addr_t * dma_handle, int gfp)
+	dma_addr_t * dma_handle, gfp_t gfp)
 	__attribute__((alias("dma_alloc_noncoherent")));
 
 EXPORT_SYMBOL(dma_alloc_coherent);
diff --git a/arch/mips/mm/dma-ip32.c b/arch/mips/mm/dma-ip32.c
index 2cbe196c35fb..a7e3072ff78d 100644
--- a/arch/mips/mm/dma-ip32.c
+++ b/arch/mips/mm/dma-ip32.c
@@ -37,7 +37,7 @@
 #define RAM_OFFSET_MASK	0x3fffffff
 
 void *dma_alloc_noncoherent(struct device *dev, size_t size,
-	dma_addr_t * dma_handle, int gfp)
+	dma_addr_t * dma_handle, gfp_t gfp)
 {
 	void *ret;
 	/* ignore region specifiers */
@@ -61,7 +61,7 @@ void *dma_alloc_noncoherent(struct device *dev, size_t size,
 EXPORT_SYMBOL(dma_alloc_noncoherent);
 
 void *dma_alloc_coherent(struct device *dev, size_t size,
-	dma_addr_t * dma_handle, int gfp)
+	dma_addr_t * dma_handle, gfp_t gfp)
 {
 	void *ret;
 
diff --git a/arch/mips/mm/dma-noncoherent.c b/arch/mips/mm/dma-noncoherent.c
index 59e54f12212e..cd4ea8474f89 100644
--- a/arch/mips/mm/dma-noncoherent.c
+++ b/arch/mips/mm/dma-noncoherent.c
@@ -24,7 +24,7 @@
  */
 
 void *dma_alloc_noncoherent(struct device *dev, size_t size,
-	dma_addr_t * dma_handle, int gfp)
+	dma_addr_t * dma_handle, gfp_t gfp)
 {
 	void *ret;
 	/* ignore region specifiers */
@@ -45,7 +45,7 @@ void *dma_alloc_noncoherent(struct device *dev, size_t size,
 EXPORT_SYMBOL(dma_alloc_noncoherent);
 
 void *dma_alloc_coherent(struct device *dev, size_t size,
-	dma_addr_t * dma_handle, int gfp)
+	dma_addr_t * dma_handle, gfp_t gfp)
 {
 	void *ret;
 
@@ -105,22 +105,7 @@ dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
 {
 	unsigned long addr = (unsigned long) ptr;
 
-	switch (direction) {
-	case DMA_TO_DEVICE:
-		dma_cache_wback(addr, size);
-		break;
-
-	case DMA_FROM_DEVICE:
-		dma_cache_inv(addr, size);
-		break;
-
-	case DMA_BIDIRECTIONAL:
-		dma_cache_wback_inv(addr, size);
-		break;
-
-	default:
-		BUG();
-	}
+	__dma_sync(addr, size, direction);
 
 	return virt_to_phys(ptr);
 }
@@ -133,22 +118,7 @@ void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 	unsigned long addr;
 	addr = dma_addr + PAGE_OFFSET;
 
-	switch (direction) {
-	case DMA_TO_DEVICE:
-		//dma_cache_wback(addr, size);
-		break;
-
-	case DMA_FROM_DEVICE:
-		//dma_cache_inv(addr, size);
-		break;
-
-	case DMA_BIDIRECTIONAL:
-		//dma_cache_wback_inv(addr, size);
-		break;
-
-	default:
-		BUG();
-	}
+	//__dma_sync(addr, size, direction);
 }
 
 EXPORT_SYMBOL(dma_unmap_single);
@@ -164,10 +134,11 @@ int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 		unsigned long addr;
 
 		addr = (unsigned long) page_address(sg->page);
-		if (addr)
+		if (addr) {
 			__dma_sync(addr + sg->offset, sg->length, direction);
-		sg->dma_address = (dma_addr_t)
-			(page_to_phys(sg->page) + sg->offset);
+			sg->dma_address = (dma_addr_t)page_to_phys(sg->page)
+					  + sg->offset;
+		}
 	}
 
 	return nents;
@@ -218,9 +189,8 @@ void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
 
 	for (i = 0; i < nhwentries; i++, sg++) {
 		addr = (unsigned long) page_address(sg->page);
-		if (!addr)
-			continue;
-		dma_cache_wback_inv(addr + sg->offset, sg->length);
+		if (addr)
+			__dma_sync(addr + sg->offset, sg->length, direction);
 	}
 }
 
diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c
index ec8077c74e9c..2d9624fd10ec 100644
--- a/arch/mips/mm/fault.c
+++ b/arch/mips/mm/fault.c
@@ -25,6 +25,7 @@
 #include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/ptrace.h>
+#include <asm/highmem.h>		/* For VMALLOC_END */
 
 /*
  * This routine handles page faults.  It determines the address,
@@ -57,7 +58,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long write,
 	 * only copy the information from the master page table,
 	 * nothing more.
 	 */
-	if (unlikely(address >= VMALLOC_START))
+	if (unlikely(address >= VMALLOC_START && address <= VMALLOC_END))
 		goto vmalloc_fault;
 
 	/*
@@ -140,7 +141,7 @@ bad_area_nosemaphore:
 		info.si_signo = SIGSEGV;
 		info.si_errno = 0;
 		/* info.si_code has been set above */
-		info.si_addr = (void *) address;
+		info.si_addr = (void __user *) address;
 		force_sig_info(SIGSEGV, &info, tsk);
 		return;
 	}
@@ -196,7 +197,7 @@ do_sigbus:
 	info.si_signo = SIGBUS;
 	info.si_errno = 0;
 	info.si_code = BUS_ADRERR;
-	info.si_addr = (void *) address;
+	info.si_addr = (void __user *) address;
 	force_sig_info(SIGBUS, &info, tsk);
 
 	return;
@@ -212,6 +213,7 @@ vmalloc_fault:
 		 */
 		int offset = __pgd_offset(address);
 		pgd_t *pgd, *pgd_k;
+		pud_t *pud, *pud_k;
 		pmd_t *pmd, *pmd_k;
 		pte_t *pte_k;
 
@@ -222,8 +224,13 @@ vmalloc_fault:
 			goto no_context;
 		set_pgd(pgd, *pgd_k);
 
-		pmd = pmd_offset(pgd, address);
-		pmd_k = pmd_offset(pgd_k, address);
+		pud = pud_offset(pgd, address);
+		pud_k = pud_offset(pgd_k, address);
+		if (!pud_present(*pud_k))
+			goto no_context;
+
+		pmd = pmd_offset(pud, address);
+		pmd_k = pmd_offset(pud_k, address);
 		if (!pmd_present(*pmd_k))
 			goto no_context;
 		set_pmd(pmd, *pmd_k);
diff --git a/arch/mips/mm/highmem.c b/arch/mips/mm/highmem.c
index dd5e2e31885b..1f7b37b38f5c 100644
--- a/arch/mips/mm/highmem.c
+++ b/arch/mips/mm/highmem.c
@@ -83,6 +83,25 @@ void __kunmap_atomic(void *kvaddr, enum km_type type)
 	preempt_check_resched();
 }
 
+/*
+ * This is the same as kmap_atomic() but can map memory that doesn't
+ * have a struct page associated with it.
+ */
+void *kmap_atomic_pfn(unsigned long pfn, enum km_type type)
+{
+	enum fixed_addresses idx;
+	unsigned long vaddr;
+
+	inc_preempt_count();
+
+	idx = type + KM_TYPE_NR*smp_processor_id();
+	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+	set_pte(kmap_pte-idx, pfn_pte(pfn, kmap_prot));
+	flush_tlb_one(vaddr);
+
+	return (void*) vaddr;
+}
+
 struct page *__kmap_atomic_to_page(void *ptr)
 {
 	unsigned long idx, vaddr = (unsigned long)ptr;
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index dc6830b10fab..3a49036e0ae8 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -68,7 +68,7 @@ unsigned long setup_zero_pages(void)
 	page = virt_to_page(empty_zero_page);
 	while (page < virt_to_page(empty_zero_page + (PAGE_SIZE << order))) {
 		set_bit(PG_reserved, &page->flags);
-		set_page_count(page, 0);
+		reset_page_mapcount(page);
 		page++;
 	}
 
@@ -83,7 +83,7 @@ pte_t *kmap_pte;
 pgprot_t kmap_prot;
 
 #define kmap_get_fixmap_pte(vaddr)					\
-	pte_offset_kernel(pmd_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr))
+	pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr))
 
 static void __init kmap_init(void)
 {
@@ -96,36 +96,42 @@ static void __init kmap_init(void)
 	kmap_prot = PAGE_KERNEL;
 }
 
-#ifdef CONFIG_64BIT
-static void __init fixrange_init(unsigned long start, unsigned long end,
+#ifdef CONFIG_32BIT
+void __init fixrange_init(unsigned long start, unsigned long end,
 	pgd_t *pgd_base)
 {
 	pgd_t *pgd;
+	pud_t *pud;
 	pmd_t *pmd;
 	pte_t *pte;
-	int i, j;
+	int i, j, k;
 	unsigned long vaddr;
 
 	vaddr = start;
 	i = __pgd_offset(vaddr);
-	j = __pmd_offset(vaddr);
+	j = __pud_offset(vaddr);
+	k = __pmd_offset(vaddr);
 	pgd = pgd_base + i;
 
 	for ( ; (i < PTRS_PER_PGD) && (vaddr != end); pgd++, i++) {
-		pmd = (pmd_t *)pgd;
-		for (; (j < PTRS_PER_PMD) && (vaddr != end); pmd++, j++) {
-			if (pmd_none(*pmd)) {
-				pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE);
-				set_pmd(pmd, __pmd(pte));
-				if (pte != pte_offset_kernel(pmd, 0))
-					BUG();
+		pud = (pud_t *)pgd;
+		for ( ; (j < PTRS_PER_PUD) && (vaddr != end); pud++, j++) {
+			pmd = (pmd_t *)pud;
+			for (; (k < PTRS_PER_PMD) && (vaddr != end); pmd++, k++) {
+				if (pmd_none(*pmd)) {
+					pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE);
+					set_pmd(pmd, __pmd(pte));
+					if (pte != pte_offset_kernel(pmd, 0))
+						BUG();
+				}
+				vaddr += PMD_SIZE;
 			}
-			vaddr += PMD_SIZE;
+			k = 0;
 		}
 		j = 0;
 	}
 }
-#endif /* CONFIG_64BIT */
+#endif /* CONFIG_32BIT */
 #endif /* CONFIG_HIGHMEM */
 
 #ifndef CONFIG_NEED_MULTIPLE_NODES
diff --git a/arch/mips/mm/ioremap.c b/arch/mips/mm/ioremap.c
index adf352273f63..3101d1db5592 100644
--- a/arch/mips/mm/ioremap.c
+++ b/arch/mips/mm/ioremap.c
@@ -55,7 +55,7 @@ static inline int remap_area_pmd(pmd_t * pmd, unsigned long address,
 	if (address >= end)
 		BUG();
 	do {
-		pte_t * pte = pte_alloc_kernel(&init_mm, pmd, address);
+		pte_t * pte = pte_alloc_kernel(pmd, address);
 		if (!pte)
 			return -ENOMEM;
 		remap_area_pte(pte, address, end - address, address + phys_addr, flags);
@@ -77,11 +77,15 @@ static int remap_area_pages(unsigned long address, phys_t phys_addr,
 	flush_cache_all();
 	if (address >= end)
 		BUG();
-	spin_lock(&init_mm.page_table_lock);
 	do {
+		pud_t *pud;
 		pmd_t *pmd;
-		pmd = pmd_alloc(&init_mm, dir, address);
+
 		error = -ENOMEM;
+		pud = pud_alloc(&init_mm, dir, address);
+		if (!pud)
+			break;
+		pmd = pmd_alloc(&init_mm, pud, address);
 		if (!pmd)
 			break;
 		if (remap_area_pmd(pmd, address, end - address,
@@ -91,21 +95,11 @@ static int remap_area_pages(unsigned long address, phys_t phys_addr,
 		address = (address + PGDIR_SIZE) & PGDIR_MASK;
 		dir++;
 	} while (address && (address < end));
-	spin_unlock(&init_mm.page_table_lock);
 	flush_tlb_all();
 	return error;
 }
 
 /*
- * Allow physical addresses to be fixed up to help 36 bit peripherals.
- */
-phys_t __attribute__ ((weak))
-fixup_bigphys_addr(phys_t phys_addr, phys_t size)
-{
-	return phys_addr;
-}
-
-/*
  * Generic mapping function (not visible outside):
  */
 
@@ -121,7 +115,7 @@ fixup_bigphys_addr(phys_t phys_addr, phys_t size)
 
 #define IS_LOW512(addr) (!((phys_t)(addr) & (phys_t) ~0x1fffffffULL))
 
-void * __ioremap(phys_t phys_addr, phys_t size, unsigned long flags)
+void __iomem * __ioremap(phys_t phys_addr, phys_t size, unsigned long flags)
 {
 	struct vm_struct * area;
 	unsigned long offset;
@@ -141,7 +135,7 @@ void * __ioremap(phys_t phys_addr, phys_t size, unsigned long flags)
 	 */
 	if (IS_LOW512(phys_addr) && IS_LOW512(last_addr) &&
 	    flags == _CACHE_UNCACHED)
-		return (void *) KSEG1ADDR(phys_addr);
+		return (void __iomem *) CKSEG1ADDR(phys_addr);
 
 	/*
 	 * Don't allow anybody to remap normal RAM that we're using..
@@ -177,10 +171,10 @@ void * __ioremap(phys_t phys_addr, phys_t size, unsigned long flags)
 		return NULL;
 	}
 
-	return (void *) (offset + (char *)addr);
+	return (void __iomem *) (offset + (char *)addr);
 }
 
-#define IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == KSEG1)
+#define IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == CKSEG1)
 
 void __iounmap(volatile void __iomem *addr)
 {
@@ -190,10 +184,8 @@ void __iounmap(volatile void __iomem *addr)
 		return;
 
 	p = remove_vm_area((void *) (PAGE_MASK & (unsigned long __force) addr));
-	if (!p) {
+	if (!p)
 		printk(KERN_ERR "iounmap: bad address %p\n", addr);
-		return;
-	}
 
         kfree(p);
 }
diff --git a/arch/mips/mm/pg-r4k.c b/arch/mips/mm/pg-r4k.c
index 9f8b16541577..f51e180072e3 100644
--- a/arch/mips/mm/pg-r4k.c
+++ b/arch/mips/mm/pg-r4k.c
@@ -25,7 +25,10 @@
 #include <asm/cpu.h>
 #include <asm/war.h>
 
-#define half_scache_line_size()		(cpu_scache_line_size() >> 1)
+#define half_scache_line_size()	(cpu_scache_line_size() >> 1)
+#define cpu_is_r4600_v1_x()	((read_c0_prid() & 0xfffffff0) == 0x00002010)
+#define cpu_is_r4600_v2_x()	((read_c0_prid() & 0xfffffff0) == 0x00002020)
+
 
 /*
  * Maximum sizes:
@@ -198,15 +201,15 @@ static inline void build_cdex_p(void)
 	if (store_offset & (cpu_dcache_line_size() - 1))
 		return;
 
-	if (R4600_V1_HIT_CACHEOP_WAR && ((read_c0_prid() & 0xfff0) == 0x2010)) {
+	if (R4600_V1_HIT_CACHEOP_WAR && cpu_is_r4600_v1_x()) {
 		build_nop();
 		build_nop();
 		build_nop();
 		build_nop();
 	}
 
-	if (R4600_V2_HIT_CACHEOP_WAR && ((read_c0_prid() & 0xfff0) == 0x2020))
-		build_insn_word(0x8c200000);	/* lw      $zero, ($at) */
+	if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
+		build_insn_word(0x3c01a000);	/* lui     $at, 0xa000  */
 
 	mi.c_format.opcode     = cache_op;
 	mi.c_format.rs         = 4;		/* $a0 */
@@ -361,7 +364,7 @@ void __init build_clear_page(void)
 
 	build_addiu_a2_a0(PAGE_SIZE - (cpu_has_prefetch ? pref_offset_clear : 0));
 
-	if (R4600_V2_HIT_CACHEOP_WAR && ((read_c0_prid() & 0xfff0) == 0x2020))
+	if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
 		build_insn_word(0x3c01a000);	/* lui     $at, 0xa000  */
 
 dest = label();
@@ -404,9 +407,6 @@ dest = label();
 
 	build_jr_ra();
 
-	flush_icache_range((unsigned long)&clear_page_array,
-	                   (unsigned long) epc);
-
 	BUG_ON(epc > clear_page_array + ARRAY_SIZE(clear_page_array));
 }
 
@@ -420,7 +420,7 @@ void __init build_copy_page(void)
 
 	build_addiu_a2_a0(PAGE_SIZE - (cpu_has_prefetch ? pref_offset_copy : 0));
 
-	if (R4600_V2_HIT_CACHEOP_WAR && ((read_c0_prid() & 0xfff0) == 0x2020))
+	if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
 		build_insn_word(0x3c01a000);	/* lui     $at, 0xa000  */
 
 dest = label();
@@ -482,8 +482,5 @@ dest = label();
 
 	build_jr_ra();
 
-	flush_icache_range((unsigned long)&copy_page_array,
-	                   (unsigned long) epc);
-
 	BUG_ON(epc > copy_page_array + ARRAY_SIZE(copy_page_array));
 }
diff --git a/arch/mips/mm/pg-sb1.c b/arch/mips/mm/pg-sb1.c
index 1b6df7133c1e..148c65b9cd8b 100644
--- a/arch/mips/mm/pg-sb1.c
+++ b/arch/mips/mm/pg-sb1.c
@@ -60,7 +60,8 @@ static inline void clear_page_cpu(void *page)
 	"	.set	noreorder	\n"
 #ifdef CONFIG_CPU_HAS_PREFETCH
 	"	daddiu	%0, %0, 128	\n"
-	"	pref	" SB1_PREF_STORE_STREAMED_HINT ", -128(%0)  \n"  /* Prefetch the first 4 lines */
+	"	pref	" SB1_PREF_STORE_STREAMED_HINT ", -128(%0)  \n"
+					     /* Prefetch the first 4 lines */
 	"	pref	" SB1_PREF_STORE_STREAMED_HINT ",  -96(%0)  \n"
 	"	pref	" SB1_PREF_STORE_STREAMED_HINT ",  -64(%0)  \n"
 	"	pref	" SB1_PREF_STORE_STREAMED_HINT ",  -32(%0)  \n"
@@ -106,7 +107,8 @@ static inline void copy_page_cpu(void *to, void *from)
 #ifdef CONFIG_CPU_HAS_PREFETCH
 	"	daddiu	%0, %0, 128	\n"
 	"	daddiu	%1, %1, 128	\n"
-	"	pref	" SB1_PREF_LOAD_STREAMED_HINT  ", -128(%0)\n"  /* Prefetch the first 4 lines */
+	"	pref	" SB1_PREF_LOAD_STREAMED_HINT  ", -128(%0)\n"
+					     /* Prefetch the first 4 lines */
 	"	pref	" SB1_PREF_STORE_STREAMED_HINT ", -128(%1)\n"
 	"	pref	" SB1_PREF_LOAD_STREAMED_HINT  ",  -96(%0)\n"
 	"	pref	" SB1_PREF_STORE_STREAMED_HINT ",  -96(%1)\n"
@@ -207,66 +209,73 @@ typedef struct dmadscr_s {
 	u64 pad_b;
 } dmadscr_t;
 
-static dmadscr_t page_descr[NR_CPUS] __attribute__((aligned(SMP_CACHE_BYTES)));
+static dmadscr_t page_descr[DM_NUM_CHANNELS]
+	__attribute__((aligned(SMP_CACHE_BYTES)));
 
 void sb1_dma_init(void)
 {
-	int cpu = smp_processor_id();
-	u64 base_val = CPHYSADDR(&page_descr[cpu]) | V_DM_DSCR_BASE_RINGSZ(1);
+	int i;
 
-	bus_writeq(base_val,
-		   (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
-	bus_writeq(base_val | M_DM_DSCR_BASE_RESET,
-		   (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
-	bus_writeq(base_val | M_DM_DSCR_BASE_ENABL,
-		   (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
+	for (i = 0; i < DM_NUM_CHANNELS; i++) {
+		const u64 base_val = CPHYSADDR(&page_descr[i]) |
+				     V_DM_DSCR_BASE_RINGSZ(1);
+		volatile void *base_reg =
+			IOADDR(A_DM_REGISTER(i, R_DM_DSCR_BASE));
+
+		__raw_writeq(base_val, base_reg);
+		__raw_writeq(base_val | M_DM_DSCR_BASE_RESET, base_reg);
+		__raw_writeq(base_val | M_DM_DSCR_BASE_ENABL, base_reg);
+	}
 }
 
 void clear_page(void *page)
 {
-	int cpu = smp_processor_id();
+	u64 to_phys = CPHYSADDR(page);
+	unsigned int cpu = smp_processor_id();
 
-	/* if the page is above Kseg0, use old way */
+	/* if the page is not in KSEG0, use old way */
 	if ((long)KSEGX(page) != (long)CKSEG0)
 		return clear_page_cpu(page);
 
-	page_descr[cpu].dscr_a = CPHYSADDR(page) | M_DM_DSCRA_ZERO_MEM | M_DM_DSCRA_L2C_DEST | M_DM_DSCRA_INTERRUPT;
+	page_descr[cpu].dscr_a = to_phys | M_DM_DSCRA_ZERO_MEM |
+				 M_DM_DSCRA_L2C_DEST | M_DM_DSCRA_INTERRUPT;
 	page_descr[cpu].dscr_b = V_DM_DSCRB_SRC_LENGTH(PAGE_SIZE);
-	bus_writeq(1, (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT)));
+	__raw_writeq(1, IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT)));
 
 	/*
 	 * Don't really want to do it this way, but there's no
 	 * reliable way to delay completion detection.
 	 */
-	while (!(bus_readq((void *)(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG)) &
-			   M_DM_DSCR_BASE_INTERRUPT))))
+	while (!(__raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG)))
+		 & M_DM_DSCR_BASE_INTERRUPT))
 		;
-	bus_readq((void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
+	__raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
 }
 
 void copy_page(void *to, void *from)
 {
-	unsigned long from_phys = CPHYSADDR(from);
-	unsigned long to_phys = CPHYSADDR(to);
-	int cpu = smp_processor_id();
+	u64 from_phys = CPHYSADDR(from);
+	u64 to_phys = CPHYSADDR(to);
+	unsigned int cpu = smp_processor_id();
 
-	/* if either page is above Kseg0, use old way */
+	/* if any page is not in KSEG0, use old way */
 	if ((long)KSEGX(to) != (long)CKSEG0
 	    || (long)KSEGX(from) != (long)CKSEG0)
 		return copy_page_cpu(to, from);
 
-	page_descr[cpu].dscr_a = CPHYSADDR(to_phys) | M_DM_DSCRA_L2C_DEST | M_DM_DSCRA_INTERRUPT;
-	page_descr[cpu].dscr_b = CPHYSADDR(from_phys) | V_DM_DSCRB_SRC_LENGTH(PAGE_SIZE);
-	bus_writeq(1, (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT)));
+	page_descr[cpu].dscr_a = to_phys | M_DM_DSCRA_L2C_DEST |
+				 M_DM_DSCRA_INTERRUPT;
+	page_descr[cpu].dscr_b = from_phys | V_DM_DSCRB_SRC_LENGTH(PAGE_SIZE);
+	__raw_writeq(1, IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT)));
 
 	/*
 	 * Don't really want to do it this way, but there's no
 	 * reliable way to delay completion detection.
 	 */
-	while (!(bus_readq((void *)(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG)) &
-				    M_DM_DSCR_BASE_INTERRUPT))))
+	while (!(__raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG)))
+		 & M_DM_DSCR_BASE_INTERRUPT))
 		;
-	bus_readq((void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
+	__raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
 }
 
 #else /* !CONFIG_SIBYTE_DMA_PAGEOPS */
diff --git a/arch/mips/mm/pgtable-32.c b/arch/mips/mm/pgtable-32.c
index 4f07f81e8500..4a3c4919e314 100644
--- a/arch/mips/mm/pgtable-32.c
+++ b/arch/mips/mm/pgtable-32.c
@@ -10,6 +10,7 @@
 #include <linux/mm.h>
 #include <linux/bootmem.h>
 #include <linux/highmem.h>
+#include <asm/fixmap.h>
 #include <asm/pgtable.h>
 
 void pgd_init(unsigned long page)
@@ -29,42 +30,12 @@ void pgd_init(unsigned long page)
 	}
 }
 
-#ifdef CONFIG_HIGHMEM
-static void __init fixrange_init (unsigned long start, unsigned long end,
-	pgd_t *pgd_base)
-{
-	pgd_t *pgd;
-	pmd_t *pmd;
-	pte_t *pte;
-	int i, j;
-	unsigned long vaddr;
-
-	vaddr = start;
-	i = __pgd_offset(vaddr);
-	j = __pmd_offset(vaddr);
-	pgd = pgd_base + i;
-
-	for ( ; (i < PTRS_PER_PGD) && (vaddr != end); pgd++, i++) {
-		pmd = (pmd_t *)pgd;
-		for (; (j < PTRS_PER_PMD) && (vaddr != end); pmd++, j++) {
-			if (pmd_none(*pmd)) {
-				pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE);
-				set_pmd(pmd, __pmd((unsigned long)pte));
-				if (pte != pte_offset_kernel(pmd, 0))
-					BUG();
-			}
-			vaddr += PMD_SIZE;
-		}
-		j = 0;
-	}
-}
-#endif
-
 void __init pagetable_init(void)
 {
 #ifdef CONFIG_HIGHMEM
 	unsigned long vaddr;
 	pgd_t *pgd, *pgd_base;
+	pud_t *pud;
 	pmd_t *pmd;
 	pte_t *pte;
 #endif
@@ -90,7 +61,8 @@ void __init pagetable_init(void)
 	fixrange_init(vaddr, vaddr + PAGE_SIZE*LAST_PKMAP, pgd_base);
 
 	pgd = swapper_pg_dir + __pgd_offset(vaddr);
-	pmd = pmd_offset(pgd, vaddr);
+	pud = pud_offset(pgd, vaddr);
+	pmd = pmd_offset(pud, vaddr);
 	pte = pte_offset_kernel(pmd, vaddr);
 	pkmap_page_table = pte;
 #endif
diff --git a/arch/mips/mm/sc-rm7k.c b/arch/mips/mm/sc-rm7k.c
index 4e92f931aaba..9e8ff8badb19 100644
--- a/arch/mips/mm/sc-rm7k.c
+++ b/arch/mips/mm/sc-rm7k.c
@@ -15,6 +15,7 @@
 #include <asm/cacheops.h>
 #include <asm/mipsregs.h>
 #include <asm/processor.h>
+#include <asm/cacheflush.h> /* for run_uncached() */
 
 /* Primary cache parameters. */
 #define sc_lsize	32
@@ -96,25 +97,13 @@ static void rm7k_sc_inv(unsigned long addr, unsigned long size)
 }
 
 /*
- * This function is executed in the uncached segment CKSEG1.
- * It must not touch the stack, because the stack pointer still points
- * into CKSEG0.
- *
- * Three options:
- *	- Write it in assembly and guarantee that we don't use the stack.
- *	- Disable caching for CKSEG0 before calling it.
- *	- Pray that GCC doesn't randomly start using the stack.
- *
- * This being Linux, we obviously take the least sane of those options -
- * following DaveM's lead in c-r4k.c
- *
- * It seems we get our kicks from relying on unguaranteed behaviour in GCC
+ * This function is executed in uncached address space.
  */
 static __init void __rm7k_sc_enable(void)
 {
 	int i;
 
-	set_c0_config(1 << 3);				/* CONF_SE */
+	set_c0_config(RM7K_CONF_SE);
 
 	write_c0_taglo(0);
 	write_c0_taghi(0);
@@ -127,24 +116,22 @@ static __init void __rm7k_sc_enable(void)
 		      ".set mips0\n\t"
 		      ".set reorder"
 		      :
-		      : "r" (KSEG0ADDR(i)), "i" (Index_Store_Tag_SD));
+		      : "r" (CKSEG0ADDR(i)), "i" (Index_Store_Tag_SD));
 	}
 }
 
 static __init void rm7k_sc_enable(void)
 {
-	void (*func)(void) = (void *) KSEG1ADDR(&__rm7k_sc_enable);
-
-	if (read_c0_config() & 0x08)			/* CONF_SE */
+	if (read_c0_config() & RM7K_CONF_SE)
 		return;
 
-	printk(KERN_INFO "Enabling secondary cache...");
-	func();
+	printk(KERN_INFO "Enabling secondary cache...\n");
+	run_uncached(__rm7k_sc_enable);
 }
 
 static void rm7k_sc_disable(void)
 {
-	clear_c0_config(1<<3);				/* CONF_SE */
+	clear_c0_config(RM7K_CONF_SE);
 }
 
 struct bcache_ops rm7k_sc_ops = {
@@ -158,19 +145,19 @@ void __init rm7k_sc_init(void)
 {
 	unsigned int config = read_c0_config();
 
-	if ((config >> 31) & 1)		/* Bit 31 set -> no S-Cache */
+	if ((config & RM7K_CONF_SC))
 		return;
 
 	printk(KERN_INFO "Secondary cache size %dK, linesize %d bytes.\n",
 	       (scache_size >> 10), sc_lsize);
 
-	if (!((config >> 3) & 1))	/* CONF_SE */
+	if (!(config & RM7K_CONF_SE))
 		rm7k_sc_enable();
 
 	/*
 	 * While we're at it let's deal with the tertiary cache.
 	 */
-	if (!((config >> 17) & 1)) {
+	if (!(config & RM7K_CONF_TC)) {
 
 		/*
 		 * We can't enable the L3 cache yet. There may be board-specific
@@ -183,9 +170,9 @@ void __init rm7k_sc_init(void)
 		 * to probe it.
 		 */
 		printk(KERN_INFO "Tertiary cache present, %s enabled\n",
-		       config&(1<<12) ? "already" : "not (yet)");
+		       (config & RM7K_CONF_TE) ? "already" : "not (yet)");
 
-		if ((config >> 12) & 1)
+		if ((config & RM7K_CONF_TE))
 			rm7k_tcache_enabled = 1;
 	}
 
diff --git a/arch/mips/mm/tlb-andes.c b/arch/mips/mm/tlb-andes.c
index 167e08e9661a..3f422a849c41 100644
--- a/arch/mips/mm/tlb-andes.c
+++ b/arch/mips/mm/tlb-andes.c
@@ -195,6 +195,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
 {
 	unsigned long flags;
 	pgd_t *pgdp;
+	pud_t *pudp;
 	pmd_t *pmdp;
 	pte_t *ptep;
 	int idx, pid;
@@ -220,7 +221,8 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
 	write_c0_entryhi(address | (pid));
 	pgdp = pgd_offset(vma->vm_mm, address);
 	tlb_probe();
-	pmdp = pmd_offset(pgdp, address);
+	pudp = pud_offset(pgdp, address);
+	pmdp = pmd_offset(pudp, address);
 	idx = read_c0_index();
 	ptep = pte_offset_map(pmdp, address);
 	write_c0_entrylo0(pte_val(*ptep++) >> 6);
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index 59d38bc05b69..8297970f0bb1 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -21,6 +21,12 @@
 
 extern void build_tlb_refill_handler(void);
 
+/*
+ * Make sure all entries differ.  If they're not different
+ * MIPS32 will take revenge ...
+ */
+#define UNIQUE_ENTRYHI(idx) (CKSEG0 + ((idx) << (PAGE_SHIFT + 1)))
+
 /* CP0 hazard avoidance. */
 #define BARRIER __asm__ __volatile__(".set noreorder\n\t" \
 				     "nop; nop; nop; nop; nop; nop;\n\t" \
@@ -42,11 +48,8 @@ void local_flush_tlb_all(void)
 
 	/* Blast 'em all away. */
 	while (entry < current_cpu_data.tlbsize) {
-		/*
-		 * Make sure all entries differ.  If they're not different
-		 * MIPS32 will take revenge ...
-		 */
-		write_c0_entryhi(CKSEG0 + (entry << (PAGE_SHIFT + 1)));
+		/* Make sure all entries differ. */
+		write_c0_entryhi(UNIQUE_ENTRYHI(entry));
 		write_c0_index(entry);
 		mtc0_tlbw_hazard();
 		tlb_write_indexed();
@@ -57,12 +60,21 @@ void local_flush_tlb_all(void)
 	local_irq_restore(flags);
 }
 
+/* All entries common to a mm share an asid.  To effectively flush
+   these entries, we just bump the asid. */
 void local_flush_tlb_mm(struct mm_struct *mm)
 {
-	int cpu = smp_processor_id();
+	int cpu;
+
+	preempt_disable();
 
-	if (cpu_context(cpu, mm) != 0)
-		drop_mmu_context(mm,cpu);
+	cpu = smp_processor_id();
+
+	if (cpu_context(cpu, mm) != 0) {
+		drop_mmu_context(mm, cpu);
+	}
+
+	preempt_enable();
 }
 
 void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
@@ -75,9 +87,9 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 		unsigned long flags;
 		int size;
 
-		local_irq_save(flags);
 		size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
 		size = (size + 1) >> 1;
+		local_irq_save(flags);
 		if (size <= current_cpu_data.tlbsize/2) {
 			int oldpid = read_c0_entryhi();
 			int newpid = cpu_asid(cpu, mm);
@@ -99,8 +111,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 				if (idx < 0)
 					continue;
 				/* Make sure all entries differ. */
-				write_c0_entryhi(CKSEG0 +
-				                 (idx << (PAGE_SHIFT + 1)));
+				write_c0_entryhi(UNIQUE_ENTRYHI(idx));
 				mtc0_tlbw_hazard();
 				tlb_write_indexed();
 			}
@@ -118,9 +129,9 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
 	unsigned long flags;
 	int size;
 
-	local_irq_save(flags);
 	size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
 	size = (size + 1) >> 1;
+	local_irq_save(flags);
 	if (size <= current_cpu_data.tlbsize / 2) {
 		int pid = read_c0_entryhi();
 
@@ -142,7 +153,7 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
 			if (idx < 0)
 				continue;
 			/* Make sure all entries differ. */
-			write_c0_entryhi(CKSEG0 + (idx << (PAGE_SHIFT + 1)));
+			write_c0_entryhi(UNIQUE_ENTRYHI(idx));
 			mtc0_tlbw_hazard();
 			tlb_write_indexed();
 		}
@@ -176,7 +187,7 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
 		if (idx < 0)
 			goto finish;
 		/* Make sure all entries differ. */
-		write_c0_entryhi(CKSEG0 + (idx << (PAGE_SHIFT + 1)));
+		write_c0_entryhi(UNIQUE_ENTRYHI(idx));
 		mtc0_tlbw_hazard();
 		tlb_write_indexed();
 		tlbw_use_hazard();
@@ -197,8 +208,8 @@ void local_flush_tlb_one(unsigned long page)
 	int oldpid, idx;
 
 	local_irq_save(flags);
-	page &= (PAGE_MASK << 1);
 	oldpid = read_c0_entryhi();
+	page &= (PAGE_MASK << 1);
 	write_c0_entryhi(page);
 	mtc0_tlbw_hazard();
 	tlb_probe();
@@ -208,7 +219,7 @@ void local_flush_tlb_one(unsigned long page)
 	write_c0_entrylo1(0);
 	if (idx >= 0) {
 		/* Make sure all entries differ. */
-		write_c0_entryhi(CKSEG0 + (idx << (PAGE_SHIFT + 1)));
+		write_c0_entryhi(UNIQUE_ENTRYHI(idx));
 		mtc0_tlbw_hazard();
 		tlb_write_indexed();
 		tlbw_use_hazard();
@@ -227,6 +238,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
 {
 	unsigned long flags;
 	pgd_t *pgdp;
+	pud_t *pudp;
 	pmd_t *pmdp;
 	pte_t *ptep;
 	int idx, pid;
@@ -237,35 +249,34 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
 	if (current->active_mm != vma->vm_mm)
 		return;
 
-	pid = read_c0_entryhi() & ASID_MASK;
-
 	local_irq_save(flags);
+
+	pid = read_c0_entryhi() & ASID_MASK;
 	address &= (PAGE_MASK << 1);
 	write_c0_entryhi(address | pid);
 	pgdp = pgd_offset(vma->vm_mm, address);
 	mtc0_tlbw_hazard();
 	tlb_probe();
 	BARRIER;
-	pmdp = pmd_offset(pgdp, address);
+	pudp = pud_offset(pgdp, address);
+	pmdp = pmd_offset(pudp, address);
 	idx = read_c0_index();
 	ptep = pte_offset_map(pmdp, address);
 
- #if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
- 	write_c0_entrylo0(ptep->pte_high);
- 	ptep++;
- 	write_c0_entrylo1(ptep->pte_high);
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
+	write_c0_entrylo0(ptep->pte_high);
+	ptep++;
+	write_c0_entrylo1(ptep->pte_high);
 #else
-  	write_c0_entrylo0(pte_val(*ptep++) >> 6);
-  	write_c0_entrylo1(pte_val(*ptep) >> 6);
+	write_c0_entrylo0(pte_val(*ptep++) >> 6);
+	write_c0_entrylo1(pte_val(*ptep) >> 6);
 #endif
-	write_c0_entryhi(address | pid);
 	mtc0_tlbw_hazard();
 	if (idx < 0)
 		tlb_write_random();
 	else
 		tlb_write_indexed();
 	tlbw_use_hazard();
-	write_c0_entryhi(pid);
 	local_irq_restore(flags);
 }
 
@@ -357,7 +368,8 @@ __init int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1,
 	old_pagemask = read_c0_pagemask();
 	wired = read_c0_wired();
 	if (--temp_tlb_entry < wired) {
-		printk(KERN_WARNING "No TLB space left for add_temporary_entry\n");
+		printk(KERN_WARNING
+		       "No TLB space left for add_temporary_entry\n");
 		ret = -ENOSPC;
 		goto out;
 	}
@@ -388,7 +400,7 @@ static void __init probe_tlb(unsigned long config)
 	 * is not supported, we assume R4k style.  Cpu probing already figured
 	 * out the number of tlb entries.
 	 */
-	if ((c->processor_id  & 0xff0000) == PRID_COMP_LEGACY)
+	if ((c->processor_id & 0xff0000) == PRID_COMP_LEGACY)
 		return;
 
 	reg = read_c0_config1();
diff --git a/arch/mips/mm/tlb-sb1.c b/arch/mips/mm/tlb-sb1.c
deleted file mode 100644
index 6256cafcf3a2..000000000000
--- a/arch/mips/mm/tlb-sb1.c
+++ /dev/null
@@ -1,376 +0,0 @@
-/*
- * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
- * Copyright (C) 1997, 2001 Ralf Baechle (ralf@gnu.org)
- * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-#include <linux/init.h>
-#include <asm/mmu_context.h>
-#include <asm/bootinfo.h>
-#include <asm/cpu.h>
-
-extern void build_tlb_refill_handler(void);
-
-#define UNIQUE_ENTRYHI(idx) (CKSEG0 + ((idx) << (PAGE_SHIFT + 1)))
-
-/* Dump the current entry* and pagemask registers */
-static inline void dump_cur_tlb_regs(void)
-{
-	unsigned int entryhihi, entryhilo, entrylo0hi, entrylo0lo, entrylo1hi;
-	unsigned int entrylo1lo, pagemask;
-
-	__asm__ __volatile__ (
-		".set push             \n"
-		".set noreorder        \n"
-		".set mips64           \n"
-		".set noat             \n"
-		"     tlbr             \n"
-		"     dmfc0  $1, $10   \n"
-		"     dsrl32 %0, $1, 0 \n"
-		"     sll    %1, $1, 0 \n"
-		"     dmfc0  $1, $2    \n"
-		"     dsrl32 %2, $1, 0 \n"
-		"     sll    %3, $1, 0 \n"
-		"     dmfc0  $1, $3    \n"
-		"     dsrl32 %4, $1, 0 \n"
-		"     sll    %5, $1, 0 \n"
-		"     mfc0   %6, $5    \n"
-		".set pop              \n"
-		: "=r" (entryhihi), "=r" (entryhilo),
-		  "=r" (entrylo0hi), "=r" (entrylo0lo),
-		  "=r" (entrylo1hi), "=r" (entrylo1lo),
-		  "=r" (pagemask));
-
-	printk("%08X%08X %08X%08X %08X%08X %08X",
-	       entryhihi, entryhilo,
-	       entrylo0hi, entrylo0lo,
-	       entrylo1hi, entrylo1lo,
-	       pagemask);
-}
-
-void sb1_dump_tlb(void)
-{
-	unsigned long old_ctx;
-	unsigned long flags;
-	int entry;
-	local_irq_save(flags);
-	old_ctx = read_c0_entryhi();
-	printk("Current TLB registers state:\n"
-	       "      EntryHi       EntryLo0          EntryLo1     PageMask  Index\n"
-	       "--------------------------------------------------------------------\n");
-	dump_cur_tlb_regs();
-	printk(" %08X\n", read_c0_index());
-	printk("\n\nFull TLB Dump:\n"
-	       "Idx      EntryHi       EntryLo0          EntryLo1     PageMask\n"
-	       "--------------------------------------------------------------\n");
-	for (entry = 0; entry < current_cpu_data.tlbsize; entry++) {
-		write_c0_index(entry);
-		printk("\n%02i ", entry);
-		dump_cur_tlb_regs();
-	}
-	printk("\n");
-	write_c0_entryhi(old_ctx);
-	local_irq_restore(flags);
-}
-
-void local_flush_tlb_all(void)
-{
-	unsigned long flags;
-	unsigned long old_ctx;
-	int entry;
-
-	local_irq_save(flags);
-	/* Save old context and create impossible VPN2 value */
-	old_ctx = read_c0_entryhi() & ASID_MASK;
-	write_c0_entrylo0(0);
-	write_c0_entrylo1(0);
-
-	entry = read_c0_wired();
-	while (entry < current_cpu_data.tlbsize) {
-		write_c0_entryhi(UNIQUE_ENTRYHI(entry));
-		write_c0_index(entry);
-		tlb_write_indexed();
-		entry++;
-	}
-	write_c0_entryhi(old_ctx);
-	local_irq_restore(flags);
-}
-
-
-/*
- * Use a bogus region of memory (starting at 0) to sanitize the TLB's.
- * Use increments of the maximum page size (16MB), and check for duplicate
- * entries before doing a given write.  Then, when we're safe from collisions
- * with the firmware, go back and give all the entries invalid addresses with
- * the normal flush routine.  Wired entries will be killed as well!
- */
-static void __init sb1_sanitize_tlb(void)
-{
-	int entry;
-	long addr = 0;
-
-	long inc = 1<<24;  /* 16MB */
-	/* Save old context and create impossible VPN2 value */
-	write_c0_entrylo0(0);
-	write_c0_entrylo1(0);
-	for (entry = 0; entry < current_cpu_data.tlbsize; entry++) {
-		do {
-			addr += inc;
-			write_c0_entryhi(addr);
-			tlb_probe();
-		} while ((int)(read_c0_index()) >= 0);
-		write_c0_index(entry);
-		tlb_write_indexed();
-	}
-	/* Now that we know we're safe from collisions, we can safely flush
-	   the TLB with the "normal" routine. */
-	local_flush_tlb_all();
-}
-
-void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
-	unsigned long end)
-{
-	struct mm_struct *mm = vma->vm_mm;
-	unsigned long flags;
-	int cpu;
-
-	local_irq_save(flags);
-	cpu = smp_processor_id();
-	if (cpu_context(cpu, mm) != 0) {
-		int size;
-		size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
-		size = (size + 1) >> 1;
-		if (size <= (current_cpu_data.tlbsize/2)) {
-			int oldpid = read_c0_entryhi() & ASID_MASK;
-			int newpid = cpu_asid(cpu, mm);
-
-			start &= (PAGE_MASK << 1);
-			end += ((PAGE_SIZE << 1) - 1);
-			end &= (PAGE_MASK << 1);
-			while (start < end) {
-				int idx;
-
-				write_c0_entryhi(start | newpid);
-				start += (PAGE_SIZE << 1);
-				tlb_probe();
-				idx = read_c0_index();
-				write_c0_entrylo0(0);
-				write_c0_entrylo1(0);
-				write_c0_entryhi(UNIQUE_ENTRYHI(idx));
-				if (idx < 0)
-					continue;
-				tlb_write_indexed();
-			}
-			write_c0_entryhi(oldpid);
-		} else {
-			drop_mmu_context(mm, cpu);
-		}
-	}
-	local_irq_restore(flags);
-}
-
-void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
-{
-	unsigned long flags;
-	int size;
-
-	size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
-	size = (size + 1) >> 1;
-
-	local_irq_save(flags);
-	if (size <= (current_cpu_data.tlbsize/2)) {
-		int pid = read_c0_entryhi();
-
-		start &= (PAGE_MASK << 1);
-		end += ((PAGE_SIZE << 1) - 1);
-		end &= (PAGE_MASK << 1);
-
-		while (start < end) {
-			int idx;
-
-			write_c0_entryhi(start);
-			start += (PAGE_SIZE << 1);
-			tlb_probe();
-			idx = read_c0_index();
-			write_c0_entrylo0(0);
-			write_c0_entrylo1(0);
-			write_c0_entryhi(UNIQUE_ENTRYHI(idx));
-			if (idx < 0)
-				continue;
-			tlb_write_indexed();
-		}
-		write_c0_entryhi(pid);
-	} else {
-		local_flush_tlb_all();
-	}
-	local_irq_restore(flags);
-}
-
-void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
-{
-	unsigned long flags;
-	int cpu = smp_processor_id();
-
-	local_irq_save(flags);
-	if (cpu_context(cpu, vma->vm_mm) != 0) {
-		int oldpid, newpid, idx;
-		newpid = cpu_asid(cpu, vma->vm_mm);
-		page &= (PAGE_MASK << 1);
-		oldpid = read_c0_entryhi() & ASID_MASK;
-		write_c0_entryhi(page | newpid);
-		tlb_probe();
-		idx = read_c0_index();
-		write_c0_entrylo0(0);
-		write_c0_entrylo1(0);
-		if (idx < 0)
-			goto finish;
-		/* Make sure all entries differ. */
-		write_c0_entryhi(UNIQUE_ENTRYHI(idx));
-		tlb_write_indexed();
-	finish:
-		write_c0_entryhi(oldpid);
-	}
-	local_irq_restore(flags);
-}
-
-/*
- * Remove one kernel space TLB entry.  This entry is assumed to be marked
- * global so we don't do the ASID thing.
- */
-void local_flush_tlb_one(unsigned long page)
-{
-	unsigned long flags;
-	int oldpid, idx;
-
-	page &= (PAGE_MASK << 1);
-	oldpid = read_c0_entryhi() & ASID_MASK;
-
-	local_irq_save(flags);
-	write_c0_entryhi(page);
-	tlb_probe();
-	idx = read_c0_index();
-	if (idx >= 0) {
-		/* Make sure all entries differ. */
-		write_c0_entryhi(UNIQUE_ENTRYHI(idx));
-		write_c0_entrylo0(0);
-		write_c0_entrylo1(0);
-		tlb_write_indexed();
-	}
-
-	write_c0_entryhi(oldpid);
-	local_irq_restore(flags);
-}
-
-/* All entries common to a mm share an asid.  To effectively flush
-   these entries, we just bump the asid. */
-void local_flush_tlb_mm(struct mm_struct *mm)
-{
-	int cpu;
-
-	preempt_disable();
-
-	cpu = smp_processor_id();
-
-	if (cpu_context(cpu, mm) != 0) {
-		drop_mmu_context(mm, cpu);
-	}
-
-	preempt_enable();
-}
-
-/* Stolen from mips32 routines */
-
-void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
-{
-	unsigned long flags;
-	pgd_t *pgdp;
-	pmd_t *pmdp;
-	pte_t *ptep;
-	int idx, pid;
-
-	/*
-	 * Handle debugger faulting in for debugee.
-	 */
-	if (current->active_mm != vma->vm_mm)
-		return;
-
-	local_irq_save(flags);
-
-	pid = read_c0_entryhi() & ASID_MASK;
-	address &= (PAGE_MASK << 1);
-	write_c0_entryhi(address | (pid));
-	pgdp = pgd_offset(vma->vm_mm, address);
-	tlb_probe();
-	pmdp = pmd_offset(pgdp, address);
-	idx = read_c0_index();
-	ptep = pte_offset_map(pmdp, address);
-	write_c0_entrylo0(pte_val(*ptep++) >> 6);
-	write_c0_entrylo1(pte_val(*ptep) >> 6);
-	if (idx < 0) {
-		tlb_write_random();
-	} else {
-		tlb_write_indexed();
-	}
-	local_irq_restore(flags);
-}
-
-void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
-	unsigned long entryhi, unsigned long pagemask)
-{
-	unsigned long flags;
-	unsigned long wired;
-	unsigned long old_pagemask;
-	unsigned long old_ctx;
-
-	local_irq_save(flags);
-	old_ctx = read_c0_entryhi() & 0xff;
-	old_pagemask = read_c0_pagemask();
-	wired = read_c0_wired();
-	write_c0_wired(wired + 1);
-	write_c0_index(wired);
-
-	write_c0_pagemask(pagemask);
-	write_c0_entryhi(entryhi);
-	write_c0_entrylo0(entrylo0);
-	write_c0_entrylo1(entrylo1);
-	tlb_write_indexed();
-
-	write_c0_entryhi(old_ctx);
-	write_c0_pagemask(old_pagemask);
-
-	local_flush_tlb_all();
-	local_irq_restore(flags);
-}
-
-/*
- * This is called from loadmmu.c.  We have to set up all the
- * memory management function pointers, as well as initialize
- * the caches and tlbs
- */
-void tlb_init(void)
-{
-	write_c0_pagemask(PM_DEFAULT_MASK);
-	write_c0_wired(0);
-
-	/*
-	 * We don't know what state the firmware left the TLB's in, so this is
-	 * the ultra-conservative way to flush the TLB's and avoid machine
-	 * check exceptions due to duplicate TLB entries
-	 */
-	sb1_sanitize_tlb();
-
-	build_tlb_refill_handler();
-}
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 6569be3983c7..0f9485806bac 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -6,6 +6,7 @@
  * Synthesize TLB refill handlers at runtime.
  *
  * Copyright (C) 2004,2005 by Thiemo Seufer
+ * Copyright (C) 2005  Maciej W. Rozycki
  */
 
 #include <stdarg.h>
@@ -91,7 +92,7 @@ enum opcode {
 	insn_addu, insn_addiu, insn_and, insn_andi, insn_beq,
 	insn_beql, insn_bgez, insn_bgezl, insn_bltz, insn_bltzl,
 	insn_bne, insn_daddu, insn_daddiu, insn_dmfc0, insn_dmtc0,
-	insn_dsll, insn_dsll32, insn_dsra, insn_dsrl, insn_dsrl32,
+	insn_dsll, insn_dsll32, insn_dsra, insn_dsrl,
 	insn_dsubu, insn_eret, insn_j, insn_jal, insn_jr, insn_ld,
 	insn_ll, insn_lld, insn_lui, insn_lw, insn_mfc0, insn_mtc0,
 	insn_ori, insn_rfe, insn_sc, insn_scd, insn_sd, insn_sll,
@@ -134,7 +135,6 @@ static __initdata struct insn insn_table[] = {
 	{ insn_dsll32, M(spec_op,0,0,0,0,dsll32_op), RT | RD | RE },
 	{ insn_dsra, M(spec_op,0,0,0,0,dsra_op), RT | RD | RE },
 	{ insn_dsrl, M(spec_op,0,0,0,0,dsrl_op), RT | RD | RE },
-	{ insn_dsrl32, M(spec_op,0,0,0,0,dsrl32_op), RT | RD | RE },
 	{ insn_dsubu, M(spec_op,0,0,0,0,dsubu_op), RS | RT | RD },
 	{ insn_eret, M(cop0_op,cop_op,0,0,0,eret_op), 0 },
 	{ insn_j, M(j_op,0,0,0,0,0), JIMM },
@@ -366,7 +366,6 @@ I_u2u1u3(_dsll);
 I_u2u1u3(_dsll32);
 I_u2u1u3(_dsra);
 I_u2u1u3(_dsrl);
-I_u2u1u3(_dsrl32);
 I_u3u1u2(_dsubu);
 I_0(_eret);
 I_u1(_j);
@@ -412,7 +411,6 @@ enum label_id {
 	label_nopage_tlbm,
 	label_smp_pgtable_change,
 	label_r3000_write_probe_fail,
-	label_r3000_write_probe_ok
 };
 
 struct label {
@@ -445,7 +443,6 @@ L_LA(_nopage_tlbs)
 L_LA(_nopage_tlbm)
 L_LA(_smp_pgtable_change)
 L_LA(_r3000_write_probe_fail)
-L_LA(_r3000_write_probe_ok)
 
 /* convenience macros for instructions */
 #ifdef CONFIG_64BIT
@@ -490,7 +487,7 @@ L_LA(_r3000_write_probe_ok)
 static __init int __attribute__((unused)) in_compat_space_p(long addr)
 {
 	/* Is this address in 32bit compat space? */
-	return (((addr) & 0xffffffff00000000) == 0xffffffff00000000);
+	return (((addr) & 0xffffffff00000000L) == 0xffffffff00000000L);
 }
 
 static __init int __attribute__((unused)) rel_highest(long val)
@@ -734,7 +731,7 @@ static void __init build_r3000_tlb_refill_handler(void)
 	if (p > tlb_handler + 32)
 		panic("TLB refill handler space exceeded");
 
-	printk("Synthesized TLB handler (%u instructions).\n",
+	printk("Synthesized TLB refill handler (%u instructions).\n",
 	       (unsigned int)(p - tlb_handler));
 #ifdef DEBUG_TLB
 	{
@@ -746,7 +743,6 @@ static void __init build_r3000_tlb_refill_handler(void)
 #endif
 
 	memcpy((void *)CAC_BASE, tlb_handler, 0x80);
-	flush_icache_range(CAC_BASE, CAC_BASE + 0x80);
 }
 
 /*
@@ -783,6 +779,8 @@ static __initdata u32 final_handler[64];
 static __init void __attribute__((unused)) build_tlb_probe_entry(u32 **p)
 {
 	switch (current_cpu_data.cputype) {
+	/* Found by experiment: R4600 v2.0 needs this, too.  */
+	case CPU_R4600:
 	case CPU_R5000:
 	case CPU_R5000A:
 	case CPU_NEVADA:
@@ -834,12 +832,20 @@ static __init void build_tlb_write_entry(u32 **p, struct label **l,
 	case CPU_R4700:
 	case CPU_R5000:
 	case CPU_R5000A:
+		i_nop(p);
+		tlbw(p);
+		i_nop(p);
+		break;
+
+	case CPU_R4300:
 	case CPU_5KC:
 	case CPU_TX49XX:
 	case CPU_AU1000:
 	case CPU_AU1100:
 	case CPU_AU1500:
 	case CPU_AU1550:
+	case CPU_AU1200:
+	case CPU_PR4450:
 		i_nop(p);
 		tlbw(p);
 		break;
@@ -848,6 +854,7 @@ static __init void build_tlb_write_entry(u32 **p, struct label **l,
 	case CPU_R12000:
 	case CPU_4KC:
 	case CPU_SB1:
+	case CPU_SB1A:
 	case CPU_4KSC:
 	case CPU_20KC:
 	case CPU_25KF:
@@ -875,6 +882,7 @@ static __init void build_tlb_write_entry(u32 **p, struct label **l,
 
 	case CPU_4KEC:
 	case CPU_24K:
+	case CPU_34K:
 		i_ehb(p);
 		tlbw(p);
 		break;
@@ -911,6 +919,7 @@ static __init void build_tlb_write_entry(u32 **p, struct label **l,
 
 	case CPU_VR4131:
 	case CPU_VR4133:
+	case CPU_R5432:
 		i_nop(p);
 		i_nop(p);
 		tlbw(p);
@@ -942,34 +951,29 @@ build_get_pmde64(u32 **p, struct label **l, struct reloc **r,
 	/* No i_nop needed here, since the next insn doesn't touch TMP. */
 
 #ifdef CONFIG_SMP
+# ifdef CONFIG_BUILD_ELF64
 	/*
-	 * 64 bit SMP has the lower part of &pgd_current[smp_processor_id()]
+	 * 64 bit SMP running in XKPHYS has smp_processor_id() << 3
 	 * stored in CONTEXT.
 	 */
-	if (in_compat_space_p(pgdc)) {
-		i_dmfc0(p, ptr, C0_CONTEXT);
-		i_dsra(p, ptr, ptr, 23);
-		i_ld(p, ptr, 0, ptr);
-	} else {
-#ifdef CONFIG_BUILD_ELF64
-		i_dmfc0(p, ptr, C0_CONTEXT);
-		i_dsrl(p, ptr, ptr, 23);
-		i_dsll(p, ptr, ptr, 3);
-		i_LA_mostly(p, tmp, pgdc);
-		i_daddu(p, ptr, ptr, tmp);
-		i_dmfc0(p, tmp, C0_BADVADDR);
-		i_ld(p, ptr, rel_lo(pgdc), ptr);
-#else
-		i_dmfc0(p, ptr, C0_CONTEXT);
-		i_lui(p, tmp, rel_highest(pgdc));
-		i_dsll(p, ptr, ptr, 9);
-		i_daddiu(p, tmp, tmp, rel_higher(pgdc));
-		i_dsrl32(p, ptr, ptr, 0);
-		i_and(p, ptr, ptr, tmp);
-		i_dmfc0(p, tmp, C0_BADVADDR);
-		i_ld(p, ptr, 0, ptr);
-#endif
-	}
+	i_dmfc0(p, ptr, C0_CONTEXT);
+	i_dsrl(p, ptr, ptr, 23);
+	i_LA_mostly(p, tmp, pgdc);
+	i_daddu(p, ptr, ptr, tmp);
+	i_dmfc0(p, tmp, C0_BADVADDR);
+	i_ld(p, ptr, rel_lo(pgdc), ptr);
+# else
+	/*
+	 * 64 bit SMP running in compat space has the lower part of
+	 * &pgd_current[smp_processor_id()] stored in CONTEXT.
+	 */
+	if (!in_compat_space_p(pgdc))
+		panic("Invalid page directory address!");
+
+	i_dmfc0(p, ptr, C0_CONTEXT);
+	i_dsra(p, ptr, ptr, 23);
+	i_ld(p, ptr, 0, ptr);
+# endif
 #else
 	i_LA_mostly(p, ptr, pgdc);
 	i_ld(p, ptr, rel_lo(pgdc), ptr);
@@ -1026,7 +1030,6 @@ build_get_pgde32(u32 **p, unsigned int tmp, unsigned int ptr)
 	i_mfc0(p, ptr, C0_CONTEXT);
 	i_LA_mostly(p, tmp, pgdc);
 	i_srl(p, ptr, ptr, 23);
-	i_sll(p, ptr, ptr, 2);
 	i_addu(p, ptr, tmp, ptr);
 #else
 	i_LA_mostly(p, ptr, pgdc);
@@ -1245,13 +1248,19 @@ static void __init build_r4000_tlb_refill_handler(void)
 	{
 		int i;
 
-		for (i = 0; i < 64; i++)
-			printk("%08x\n", final_handler[i]);
+		f = final_handler;
+#ifdef CONFIG_64BIT
+		if (final_len > 32)
+			final_len = 64;
+		else
+			f = final_handler + 32;
+#endif /* CONFIG_64BIT */
+		for (i = 0; i < final_len; i++)
+			printk("%08x\n", f[i]);
 	}
 #endif
 
 	memcpy((void *)CAC_BASE, final_handler, 0x100);
-	flush_icache_range(CAC_BASE, CAC_BASE + 0x100);
 }
 
 /*
@@ -1277,37 +1286,41 @@ u32 __tlb_handler_align handle_tlbs[FASTPATH_SIZE];
 u32 __tlb_handler_align handle_tlbm[FASTPATH_SIZE];
 
 static void __init
-iPTE_LW(u32 **p, struct label **l, unsigned int pte, int offset,
-	unsigned int ptr)
+iPTE_LW(u32 **p, struct label **l, unsigned int pte, unsigned int ptr)
 {
 #ifdef CONFIG_SMP
 # ifdef CONFIG_64BIT_PHYS_ADDR
 	if (cpu_has_64bits)
-		i_lld(p, pte, offset, ptr);
+		i_lld(p, pte, 0, ptr);
 	else
 # endif
-		i_LL(p, pte, offset, ptr);
+		i_LL(p, pte, 0, ptr);
 #else
 # ifdef CONFIG_64BIT_PHYS_ADDR
 	if (cpu_has_64bits)
-		i_ld(p, pte, offset, ptr);
+		i_ld(p, pte, 0, ptr);
 	else
 # endif
-		i_LW(p, pte, offset, ptr);
+		i_LW(p, pte, 0, ptr);
 #endif
 }
 
 static void __init
-iPTE_SW(u32 **p, struct reloc **r, unsigned int pte, int offset,
-	unsigned int ptr)
+iPTE_SW(u32 **p, struct reloc **r, unsigned int pte, unsigned int ptr,
+	unsigned int mode)
 {
+#ifdef CONFIG_64BIT_PHYS_ADDR
+	unsigned int hwmode = mode & (_PAGE_VALID | _PAGE_DIRTY);
+#endif
+
+	i_ori(p, pte, pte, mode);
 #ifdef CONFIG_SMP
 # ifdef CONFIG_64BIT_PHYS_ADDR
 	if (cpu_has_64bits)
-		i_scd(p, pte, offset, ptr);
+		i_scd(p, pte, 0, ptr);
 	else
 # endif
-		i_SC(p, pte, offset, ptr);
+		i_SC(p, pte, 0, ptr);
 
 	if (r10000_llsc_war())
 		il_beqzl(p, r, pte, label_smp_pgtable_change);
@@ -1318,7 +1331,7 @@ iPTE_SW(u32 **p, struct reloc **r, unsigned int pte, int offset,
 	if (!cpu_has_64bits) {
 		/* no i_nop needed */
 		i_ll(p, pte, sizeof(pte_t) / 2, ptr);
-		i_ori(p, pte, pte, _PAGE_VALID);
+		i_ori(p, pte, pte, hwmode);
 		i_sc(p, pte, sizeof(pte_t) / 2, ptr);
 		il_beqz(p, r, pte, label_smp_pgtable_change);
 		/* no i_nop needed */
@@ -1331,15 +1344,15 @@ iPTE_SW(u32 **p, struct reloc **r, unsigned int pte, int offset,
 #else
 # ifdef CONFIG_64BIT_PHYS_ADDR
 	if (cpu_has_64bits)
-		i_sd(p, pte, offset, ptr);
+		i_sd(p, pte, 0, ptr);
 	else
 # endif
-		i_SW(p, pte, offset, ptr);
+		i_SW(p, pte, 0, ptr);
 
 # ifdef CONFIG_64BIT_PHYS_ADDR
 	if (!cpu_has_64bits) {
 		i_lw(p, pte, sizeof(pte_t) / 2, ptr);
-		i_ori(p, pte, pte, _PAGE_VALID);
+		i_ori(p, pte, pte, hwmode);
 		i_sw(p, pte, sizeof(pte_t) / 2, ptr);
 		i_lw(p, pte, 0, ptr);
 	}
@@ -1359,7 +1372,7 @@ build_pte_present(u32 **p, struct label **l, struct reloc **r,
 	i_andi(p, pte, pte, _PAGE_PRESENT | _PAGE_READ);
 	i_xori(p, pte, pte, _PAGE_PRESENT | _PAGE_READ);
 	il_bnez(p, r, pte, lid);
-	iPTE_LW(p, l, pte, 0, ptr);
+	iPTE_LW(p, l, pte, ptr);
 }
 
 /* Make PTE valid, store result in PTR. */
@@ -1367,8 +1380,9 @@ static void __init
 build_make_valid(u32 **p, struct reloc **r, unsigned int pte,
 		 unsigned int ptr)
 {
-	i_ori(p, pte, pte, _PAGE_VALID | _PAGE_ACCESSED);
-	iPTE_SW(p, r, pte, 0, ptr);
+	unsigned int mode = _PAGE_VALID | _PAGE_ACCESSED;
+
+	iPTE_SW(p, r, pte, ptr, mode);
 }
 
 /*
@@ -1382,7 +1396,7 @@ build_pte_writable(u32 **p, struct label **l, struct reloc **r,
 	i_andi(p, pte, pte, _PAGE_PRESENT | _PAGE_WRITE);
 	i_xori(p, pte, pte, _PAGE_PRESENT | _PAGE_WRITE);
 	il_bnez(p, r, pte, lid);
-	iPTE_LW(p, l, pte, 0, ptr);
+	iPTE_LW(p, l, pte, ptr);
 }
 
 /* Make PTE writable, update software status bits as well, then store
@@ -1392,9 +1406,10 @@ static void __init
 build_make_write(u32 **p, struct reloc **r, unsigned int pte,
 		 unsigned int ptr)
 {
-	i_ori(p, pte, pte,
-	      _PAGE_ACCESSED | _PAGE_MODIFIED | _PAGE_VALID | _PAGE_DIRTY);
-	iPTE_SW(p, r, pte, 0, ptr);
+	unsigned int mode = (_PAGE_ACCESSED | _PAGE_MODIFIED | _PAGE_VALID
+			     | _PAGE_DIRTY);
+
+	iPTE_SW(p, r, pte, ptr, mode);
 }
 
 /*
@@ -1407,41 +1422,48 @@ build_pte_modifiable(u32 **p, struct label **l, struct reloc **r,
 {
 	i_andi(p, pte, pte, _PAGE_WRITE);
 	il_beqz(p, r, pte, lid);
-	iPTE_LW(p, l, pte, 0, ptr);
+	iPTE_LW(p, l, pte, ptr);
 }
 
 /*
  * R3000 style TLB load/store/modify handlers.
  */
 
-/* This places the pte in the page table at PTR into ENTRYLO0. */
+/*
+ * This places the pte into ENTRYLO0 and writes it with tlbwi.
+ * Then it returns.
+ */
 static void __init
-build_r3000_pte_reload(u32 **p, unsigned int ptr)
+build_r3000_pte_reload_tlbwi(u32 **p, unsigned int pte, unsigned int tmp)
 {
-	i_lw(p, ptr, 0, ptr);
-	i_nop(p); /* load delay */
-	i_mtc0(p, ptr, C0_ENTRYLO0);
-	i_nop(p); /* cp0 delay */
+	i_mtc0(p, pte, C0_ENTRYLO0); /* cp0 delay */
+	i_mfc0(p, tmp, C0_EPC); /* cp0 delay */
+	i_tlbwi(p);
+	i_jr(p, tmp);
+	i_rfe(p); /* branch delay */
 }
 
 /*
- * The index register may have the probe fail bit set,
- * because we would trap on access kseg2, i.e. without refill.
+ * This places the pte into ENTRYLO0 and writes it with tlbwi
+ * or tlbwr as appropriate.  This is because the index register
+ * may have the probe fail bit set as a result of a trap on a
+ * kseg2 access, i.e. without refill.  Then it returns.
  */
 static void __init
-build_r3000_tlb_write(u32 **p, struct label **l, struct reloc **r,
-		      unsigned int tmp)
+build_r3000_tlb_reload_write(u32 **p, struct label **l, struct reloc **r,
+			     unsigned int pte, unsigned int tmp)
 {
 	i_mfc0(p, tmp, C0_INDEX);
-	i_nop(p); /* cp0 delay */
-	il_bltz(p, r, tmp, label_r3000_write_probe_fail);
-	i_nop(p); /* branch delay */
-	i_tlbwi(p);
-	il_b(p, r, label_r3000_write_probe_ok);
-	i_nop(p); /* branch delay */
+	i_mtc0(p, pte, C0_ENTRYLO0); /* cp0 delay */
+	il_bltz(p, r, tmp, label_r3000_write_probe_fail); /* cp0 delay */
+	i_mfc0(p, tmp, C0_EPC); /* branch delay */
+	i_tlbwi(p); /* cp0 delay */
+	i_jr(p, tmp);
+	i_rfe(p); /* branch delay */
 	l_r3000_write_probe_fail(l, *p);
-	i_tlbwr(p);
-	l_r3000_write_probe_ok(l, *p);
+	i_tlbwr(p); /* cp0 delay */
+	i_jr(p, tmp);
+	i_rfe(p); /* branch delay */
 }
 
 static void __init
@@ -1461,17 +1483,7 @@ build_r3000_tlbchange_handler_head(u32 **p, unsigned int pte,
 	i_andi(p, pte, pte, 0xffc); /* load delay */
 	i_addu(p, ptr, ptr, pte);
 	i_lw(p, pte, 0, ptr);
-	i_nop(p); /* load delay */
-	i_tlbp(p);
-}
-
-static void __init
-build_r3000_tlbchange_handler_tail(u32 **p, unsigned int tmp)
-{
-	i_mfc0(p, tmp, C0_EPC);
-	i_nop(p); /* cp0 delay */
-	i_jr(p, tmp);
-	i_rfe(p); /* branch delay */
+	i_tlbp(p); /* load delay */
 }
 
 static void __init build_r3000_tlb_load_handler(void)
@@ -1486,10 +1498,9 @@ static void __init build_r3000_tlb_load_handler(void)
 
 	build_r3000_tlbchange_handler_head(&p, K0, K1);
 	build_pte_present(&p, &l, &r, K0, K1, label_nopage_tlbl);
+	i_nop(&p); /* load delay */
 	build_make_valid(&p, &r, K0, K1);
-	build_r3000_pte_reload(&p, K1);
-	build_r3000_tlb_write(&p, &l, &r, K0);
-	build_r3000_tlbchange_handler_tail(&p, K0);
+	build_r3000_tlb_reload_write(&p, &l, &r, K0, K1);
 
 	l_nopage_tlbl(&l, p);
 	i_j(&p, (unsigned long)tlb_do_page_fault_0 & 0x0fffffff);
@@ -1506,13 +1517,10 @@ static void __init build_r3000_tlb_load_handler(void)
 	{
 		int i;
 
-		for (i = 0; i < FASTPATH_SIZE; i++)
+		for (i = 0; i < (p - handle_tlbl); i++)
 			printk("%08x\n", handle_tlbl[i]);
 	}
 #endif
-
-	flush_icache_range((unsigned long)handle_tlbl,
-			   (unsigned long)handle_tlbl + FASTPATH_SIZE * sizeof(u32));
 }
 
 static void __init build_r3000_tlb_store_handler(void)
@@ -1527,10 +1535,9 @@ static void __init build_r3000_tlb_store_handler(void)
 
 	build_r3000_tlbchange_handler_head(&p, K0, K1);
 	build_pte_writable(&p, &l, &r, K0, K1, label_nopage_tlbs);
+	i_nop(&p); /* load delay */
 	build_make_write(&p, &r, K0, K1);
-	build_r3000_pte_reload(&p, K1);
-	build_r3000_tlb_write(&p, &l, &r, K0);
-	build_r3000_tlbchange_handler_tail(&p, K0);
+	build_r3000_tlb_reload_write(&p, &l, &r, K0, K1);
 
 	l_nopage_tlbs(&l, p);
 	i_j(&p, (unsigned long)tlb_do_page_fault_1 & 0x0fffffff);
@@ -1547,13 +1554,10 @@ static void __init build_r3000_tlb_store_handler(void)
 	{
 		int i;
 
-		for (i = 0; i < FASTPATH_SIZE; i++)
+		for (i = 0; i < (p - handle_tlbs); i++)
 			printk("%08x\n", handle_tlbs[i]);
 	}
 #endif
-
-	flush_icache_range((unsigned long)handle_tlbs,
-			   (unsigned long)handle_tlbs + FASTPATH_SIZE * sizeof(u32));
 }
 
 static void __init build_r3000_tlb_modify_handler(void)
@@ -1568,10 +1572,9 @@ static void __init build_r3000_tlb_modify_handler(void)
 
 	build_r3000_tlbchange_handler_head(&p, K0, K1);
 	build_pte_modifiable(&p, &l, &r, K0, K1, label_nopage_tlbm);
+	i_nop(&p); /* load delay */
 	build_make_write(&p, &r, K0, K1);
-	build_r3000_pte_reload(&p, K1);
-	i_tlbwi(&p);
-	build_r3000_tlbchange_handler_tail(&p, K0);
+	build_r3000_pte_reload_tlbwi(&p, K0, K1);
 
 	l_nopage_tlbm(&l, p);
 	i_j(&p, (unsigned long)tlb_do_page_fault_1 & 0x0fffffff);
@@ -1588,13 +1591,10 @@ static void __init build_r3000_tlb_modify_handler(void)
 	{
 		int i;
 
-		for (i = 0; i < FASTPATH_SIZE; i++)
+		for (i = 0; i < (p - handle_tlbm); i++)
 			printk("%08x\n", handle_tlbm[i]);
 	}
 #endif
-
-	flush_icache_range((unsigned long)handle_tlbm,
-			   (unsigned long)handle_tlbm + FASTPATH_SIZE * sizeof(u32));
 }
 
 /*
@@ -1620,7 +1620,7 @@ build_r4000_tlbchange_handler_head(u32 **p, struct label **l,
 #ifdef CONFIG_SMP
 	l_smp_pgtable_change(l, *p);
 # endif
-	iPTE_LW(p, l, pte, 0, ptr); /* get even pte */
+	iPTE_LW(p, l, pte, ptr); /* get even pte */
 	build_tlb_probe_entry(p);
 }
 
@@ -1680,13 +1680,10 @@ static void __init build_r4000_tlb_load_handler(void)
 	{
 		int i;
 
-		for (i = 0; i < FASTPATH_SIZE; i++)
+		for (i = 0; i < (p - handle_tlbl); i++)
 			printk("%08x\n", handle_tlbl[i]);
 	}
 #endif
-
-	flush_icache_range((unsigned long)handle_tlbl,
-			   (unsigned long)handle_tlbl + FASTPATH_SIZE * sizeof(u32));
 }
 
 static void __init build_r4000_tlb_store_handler(void)
@@ -1719,13 +1716,10 @@ static void __init build_r4000_tlb_store_handler(void)
 	{
 		int i;
 
-		for (i = 0; i < FASTPATH_SIZE; i++)
+		for (i = 0; i < (p - handle_tlbs); i++)
 			printk("%08x\n", handle_tlbs[i]);
 	}
 #endif
-
-	flush_icache_range((unsigned long)handle_tlbs,
-			   (unsigned long)handle_tlbs + FASTPATH_SIZE * sizeof(u32));
 }
 
 static void __init build_r4000_tlb_modify_handler(void)
@@ -1759,13 +1753,10 @@ static void __init build_r4000_tlb_modify_handler(void)
 	{
 		int i;
 
-		for (i = 0; i < FASTPATH_SIZE; i++)
+		for (i = 0; i < (p - handle_tlbm); i++)
 			printk("%08x\n", handle_tlbm[i]);
 	}
 #endif
-
-	flush_icache_range((unsigned long)handle_tlbm,
-			   (unsigned long)handle_tlbm + FASTPATH_SIZE * sizeof(u32));
 }
 
 void __init build_tlb_refill_handler(void)
@@ -1813,3 +1804,13 @@ void __init build_tlb_refill_handler(void)
 		}
 	}
 }
+
+void __init flush_tlb_handlers(void)
+{
+	flush_icache_range((unsigned long)handle_tlbl,
+			   (unsigned long)handle_tlbl + sizeof(handle_tlbl));
+	flush_icache_range((unsigned long)handle_tlbs,
+			   (unsigned long)handle_tlbs + sizeof(handle_tlbs));
+	flush_icache_range((unsigned long)handle_tlbm,
+			   (unsigned long)handle_tlbm + sizeof(handle_tlbm));
+}
diff --git a/arch/mips/momentum/Kconfig b/arch/mips/momentum/Kconfig
new file mode 100644
index 000000000000..70a61cf7174d
--- /dev/null
+++ b/arch/mips/momentum/Kconfig
@@ -0,0 +1,6 @@
+config JAGUAR_DMALOW
+	bool "Low DMA Mode"
+	depends on MOMENCO_JAGUAR_ATX
+	help
+	  Select to Y if jump JP5 is set on your board, N otherwise.  Normally
+	  the jumper is set, so if you feel unsafe, just say Y.
diff --git a/arch/mips/momentum/jaguar_atx/prom.c b/arch/mips/momentum/jaguar_atx/prom.c
index 14ae2e713585..aae7a802767a 100644
--- a/arch/mips/momentum/jaguar_atx/prom.c
+++ b/arch/mips/momentum/jaguar_atx/prom.c
@@ -236,8 +236,9 @@ void __init prom_init(void)
 #endif
 }
 
-void __init prom_free_prom_memory(void)
+unsigned long __init prom_free_prom_memory(void)
 {
+	return 0;
 }
 
 void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
diff --git a/arch/mips/momentum/jaguar_atx/setup.c b/arch/mips/momentum/jaguar_atx/setup.c
index 90288cf2b1e0..bab192ddc185 100644
--- a/arch/mips/momentum/jaguar_atx/setup.c
+++ b/arch/mips/momentum/jaguar_atx/setup.c
@@ -149,7 +149,9 @@ arch_initcall(per_cpu_mappings);
 unsigned long m48t37y_get_time(void)
 {
 	unsigned int year, month, day, hour, min, sec;
+	unsigned long flags;
 
+	spin_lock_irqsave(&rtc_lock, flags);
 	/* stop the update */
 	rtc_base[0x7ff8] = 0x40;
 
@@ -166,6 +168,7 @@ unsigned long m48t37y_get_time(void)
 
 	/* start the update */
 	rtc_base[0x7ff8] = 0x00;
+	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	return mktime(year, month, day, hour, min, sec);
 }
@@ -173,11 +176,13 @@ unsigned long m48t37y_get_time(void)
 int m48t37y_set_time(unsigned long sec)
 {
 	struct rtc_time tm;
+	unsigned long flags;
 
 	/* convert to a more useful format -- note months count from 0 */
 	to_tm(sec, &tm);
 	tm.tm_mon += 1;
 
+	spin_lock_irqsave(&rtc_lock, flags);
 	/* enable writing */
 	rtc_base[0x7ff8] = 0x80;
 
@@ -201,6 +206,7 @@ int m48t37y_set_time(unsigned long sec)
 
 	/* disable writing */
 	rtc_base[0x7ff8] = 0x00;
+	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	return 0;
 }
@@ -351,7 +357,7 @@ static __init int __init ja_pci_init(void)
 
 arch_initcall(ja_pci_init);
 
-static int  __init momenco_jaguar_atx_setup(void)
+void __init plat_setup(void)
 {
 	unsigned int tmpword;
 
@@ -467,8 +473,4 @@ static int  __init momenco_jaguar_atx_setup(void)
 
 	}
 #endif
-
-	return 0;
 }
-
-early_initcall(momenco_jaguar_atx_setup);
diff --git a/arch/mips/momentum/ocelot_3/prom.c b/arch/mips/momentum/ocelot_3/prom.c
index c4fa9c525faa..9803daa2a792 100644
--- a/arch/mips/momentum/ocelot_3/prom.c
+++ b/arch/mips/momentum/ocelot_3/prom.c
@@ -239,8 +239,9 @@ void __init prom_init(void)
 #endif
 }
 
-void __init prom_free_prom_memory(void)
+unsigned long __init prom_free_prom_memory(void)
 {
+	return 0;
 }
 
 void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
diff --git a/arch/mips/momentum/ocelot_3/setup.c b/arch/mips/momentum/ocelot_3/setup.c
index ce2efcbab7aa..c9b7ff8148ec 100644
--- a/arch/mips/momentum/ocelot_3/setup.c
+++ b/arch/mips/momentum/ocelot_3/setup.c
@@ -135,7 +135,9 @@ void setup_wired_tlb_entries(void)
 unsigned long m48t37y_get_time(void)
 {
 	unsigned int year, month, day, hour, min, sec;
+	unsigned long flags;
 
+	spin_lock_irqsave(&rtc_lock, flags);
 	/* stop the update */
 	rtc_base[0x7ff8] = 0x40;
 
@@ -152,6 +154,7 @@ unsigned long m48t37y_get_time(void)
 
 	/* start the update */
 	rtc_base[0x7ff8] = 0x00;
+	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	return mktime(year, month, day, hour, min, sec);
 }
@@ -159,11 +162,13 @@ unsigned long m48t37y_get_time(void)
 int m48t37y_set_time(unsigned long sec)
 {
 	struct rtc_time tm;
+	unsigned long flags;
 
 	/* convert to a more useful format -- note months count from 0 */
 	to_tm(sec, &tm);
 	tm.tm_mon += 1;
 
+	spin_lock_irqsave(&rtc_lock, flags);
 	/* enable writing */
 	rtc_base[0x7ff8] = 0x80;
 
@@ -187,6 +192,7 @@ int m48t37y_set_time(unsigned long sec)
 
 	/* disable writing */
 	rtc_base[0x7ff8] = 0x00;
+	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	return 0;
 }
@@ -307,7 +313,7 @@ static __init int __init ja_pci_init(void)
 
 arch_initcall(ja_pci_init);
 
-static int __init momenco_ocelot_3_setup(void)
+void __init plat_setup(void)
 {
 	unsigned int tmpword;
 
@@ -391,8 +397,4 @@ static int __init momenco_ocelot_3_setup(void)
 
 	/* Support for 128 MB memory */
 	add_memory_region(0x0, 0x08000000, BOOT_MEM_RAM);
-
-	return 0;
 }
-
-early_initcall(momenco_ocelot_3_setup);
diff --git a/arch/mips/momentum/ocelot_c/cpci-irq.c b/arch/mips/momentum/ocelot_c/cpci-irq.c
index dea48b3ad687..bd885785e2f9 100644
--- a/arch/mips/momentum/ocelot_c/cpci-irq.c
+++ b/arch/mips/momentum/ocelot_c/cpci-irq.c
@@ -129,14 +129,13 @@ void ll_cpci_irq(struct pt_regs *regs)
 #define shutdown_cpci_irq	disable_cpci_irq
 
 struct hw_interrupt_type cpci_irq_type = {
-	"CPCI/FPGA",
-	startup_cpci_irq,
-	shutdown_cpci_irq,
-	enable_cpci_irq,
-	disable_cpci_irq,
-	mask_and_ack_cpci_irq,
-	end_cpci_irq,
-	NULL
+	.typename = "CPCI/FPGA",
+	.startup = startup_cpci_irq,
+	.shutdown = shutdown_cpci_irq,
+	.enable = enable_cpci_irq,
+	.disable = disable_cpci_irq,
+	.ack = mask_and_ack_cpci_irq,
+	.end = end_cpci_irq,
 };
 
 void cpci_irq_init(void)
diff --git a/arch/mips/momentum/ocelot_c/setup.c b/arch/mips/momentum/ocelot_c/setup.c
index 844ddd06349b..2755c1547473 100644
--- a/arch/mips/momentum/ocelot_c/setup.c
+++ b/arch/mips/momentum/ocelot_c/setup.c
@@ -140,7 +140,9 @@ unsigned long m48t37y_get_time(void)
 	unsigned char* rtc_base = (unsigned char*)0xfc800000;
 #endif
 	unsigned int year, month, day, hour, min, sec;
+	unsigned long flags;
 
+	spin_lock_irqsave(&rtc_lock, flags);
 	/* stop the update */
 	rtc_base[0x7ff8] = 0x40;
 
@@ -157,6 +159,7 @@ unsigned long m48t37y_get_time(void)
 
 	/* start the update */
 	rtc_base[0x7ff8] = 0x00;
+	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	return mktime(year, month, day, hour, min, sec);
 }
@@ -169,11 +172,13 @@ int m48t37y_set_time(unsigned long sec)
 	unsigned char* rtc_base = (unsigned char*)0xfc800000;
 #endif
 	struct rtc_time tm;
+	unsigned long flags;
 
 	/* convert to a more useful format -- note months count from 0 */
 	to_tm(sec, &tm);
 	tm.tm_mon += 1;
 
+	spin_lock_irqsave(&rtc_lock, flags);
 	/* enable writing */
 	rtc_base[0x7ff8] = 0x80;
 
@@ -197,6 +202,7 @@ int m48t37y_set_time(unsigned long sec)
 
 	/* disable writing */
 	rtc_base[0x7ff8] = 0x00;
+	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	return 0;
 }
@@ -222,7 +228,7 @@ void momenco_time_init(void)
 	rtc_set_time = m48t37y_set_time;
 }
 
-static void __init momenco_ocelot_c_setup(void)
+void __init plat_setup(void)
 {
 	unsigned int tmpword;
 
@@ -340,8 +346,6 @@ static void __init momenco_ocelot_c_setup(void)
 	}
 }
 
-early_initcall(momenco_ocelot_c_setup);
-
 #ifndef CONFIG_64BIT
 /* This needs to be one of the first initcalls, because no I/O port access
    can work before this */
diff --git a/arch/mips/momentum/ocelot_c/uart-irq.c b/arch/mips/momentum/ocelot_c/uart-irq.c
index ebe1507b17df..755bde5146be 100644
--- a/arch/mips/momentum/ocelot_c/uart-irq.c
+++ b/arch/mips/momentum/ocelot_c/uart-irq.c
@@ -122,14 +122,13 @@ void ll_uart_irq(struct pt_regs *regs)
 #define shutdown_uart_irq	disable_uart_irq
 
 struct hw_interrupt_type uart_irq_type = {
-	"UART/FPGA",
-	startup_uart_irq,
-	shutdown_uart_irq,
-	enable_uart_irq,
-	disable_uart_irq,
-	mask_and_ack_uart_irq,
-	end_uart_irq,
-	NULL
+	.typename = "UART/FPGA",
+	.startup = startup_uart_irq,
+	.shutdown = shutdown_uart_irq,
+	.enable = enable_uart_irq,
+	.disable = disable_uart_irq,
+	.ack = mask_and_ack_uart_irq,
+	.end = end_uart_irq,
 };
 
 void uart_irq_init(void)
diff --git a/arch/mips/momentum/ocelot_g/gt-irq.c b/arch/mips/momentum/ocelot_g/gt-irq.c
index d0b5c9dd0ea4..e5eceed1beff 100644
--- a/arch/mips/momentum/ocelot_g/gt-irq.c
+++ b/arch/mips/momentum/ocelot_g/gt-irq.c
@@ -178,7 +178,7 @@ void gt64240_time_init(void)
 	timer.name = "timer";
 	timer.dev_id = NULL;
 	timer.next = NULL;
-	timer.mask = 0;
+	timer.mask = CPU_MASK_NONE;
 	irq_desc[6].action = &timer;
 
 	enable_irq(6);
diff --git a/arch/mips/momentum/ocelot_g/setup.c b/arch/mips/momentum/ocelot_g/setup.c
index 38a78ab8c830..6336751391c3 100644
--- a/arch/mips/momentum/ocelot_g/setup.c
+++ b/arch/mips/momentum/ocelot_g/setup.c
@@ -160,7 +160,7 @@ static void __init setup_l3cache(unsigned long size)
 	printk("Done\n");
 }
 
-static int  __init momenco_ocelot_g_setup(void)
+void __init plat_setup(void)
 {
 	void (*l3func)(unsigned long) = (void *) KSEG1ADDR(setup_l3cache);
 	unsigned int tmpword;
@@ -240,12 +240,8 @@ static int  __init momenco_ocelot_g_setup(void)
 
 	/* FIXME: Fix up the DiskOnChip mapping */
 	MV_WRITE(0x468, 0xfef73);
-
-	return 0;
 }
 
-early_initcall(momenco_ocelot_g_setup);
-
 /* This needs to be one of the first initcalls, because no I/O port access
    can work before this */
 
diff --git a/arch/mips/oprofile/Kconfig b/arch/mips/oprofile/Kconfig
index 19d37730b664..55feaf798596 100644
--- a/arch/mips/oprofile/Kconfig
+++ b/arch/mips/oprofile/Kconfig
@@ -11,7 +11,7 @@ config PROFILING
 
 config OPROFILE
 	tristate "OProfile system profiling (EXPERIMENTAL)"
-	depends on PROFILING
+	depends on PROFILING && EXPERIMENTAL
 	help
 	  OProfile is a profiling system capable of profiling the
 	  whole system, include the kernel, kernel modules, libraries,
diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
index ab65ce3d471a..dd2cc42f1b6d 100644
--- a/arch/mips/oprofile/common.c
+++ b/arch/mips/oprofile/common.c
@@ -3,7 +3,8 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2004 by Ralf Baechle
+ * Copyright (C) 2004, 2005 Ralf Baechle
+ * Copyright (C) 2005 MIPS Technologies, Inc.
  */
 #include <linux/errno.h>
 #include <linux/init.h>
@@ -45,10 +46,10 @@ static int op_mips_create_files(struct super_block * sb, struct dentry * root)
 		oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
 		oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
 		oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
-		/* Dummies.  */
 		oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
 		oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
 		oprofilefs_create_ulong(sb, dir, "exl", &ctr[i].exl);
+		/* Dummy.  */
 		oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask);
 	}
 
@@ -68,9 +69,10 @@ static void op_mips_stop(void)
 	on_each_cpu(model->cpu_stop, NULL, 0, 1);
 }
 
-void __init oprofile_arch_init(struct oprofile_operations *ops)
+int __init oprofile_arch_init(struct oprofile_operations *ops)
 {
 	struct op_mips_model *lmodel = NULL;
+	int res;
 
 	switch (current_cpu_data.cputype) {
 	case CPU_24K:
@@ -83,21 +85,25 @@ void __init oprofile_arch_init(struct oprofile_operations *ops)
 	};
 
 	if (!lmodel)
-		return;
+		return -ENODEV;
 
-	if (lmodel->init())
-		return;
+	res = lmodel->init();
+	if (res)
+		return res;
 
 	model = lmodel;
 
-	ops->create_files = op_mips_create_files;
-	ops->setup = op_mips_setup;
-	ops->start = op_mips_start;
-	ops->stop = op_mips_stop;
-	ops->cpu_type = lmodel->cpu_type;
+	ops->create_files	= op_mips_create_files;
+	ops->setup		= op_mips_setup;
+	//ops->shutdown         = op_mips_shutdown;
+	ops->start		= op_mips_start;
+	ops->stop		= op_mips_stop;
+	ops->cpu_type		= lmodel->cpu_type;
 
 	printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
 	       lmodel->cpu_type);
+
+	return 0;
 }
 
 void oprofile_arch_exit(void)
diff --git a/arch/mips/oprofile/op_impl.h b/arch/mips/oprofile/op_impl.h
index 9f5cdff041be..f0121557047d 100644
--- a/arch/mips/oprofile/op_impl.h
+++ b/arch/mips/oprofile/op_impl.h
@@ -10,6 +10,11 @@
 #ifndef OP_IMPL_H
 #define OP_IMPL_H 1
 
+struct pt_regs;
+
+extern void null_perf_irq(struct pt_regs *regs);
+extern void (*perf_irq)(struct pt_regs *regs);
+
 /* Per-counter configuration as set via oprofilefs.  */
 struct op_counter_config {
 	unsigned long enabled;
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
new file mode 100644
index 000000000000..d36b64dfcb2f
--- /dev/null
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -0,0 +1,215 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004, 2005 by Ralf Baechle
+ * Copyright (C) 2005 by MIPS Technologies, Inc.
+ */
+#include <linux/oprofile.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+
+#include "op_impl.h"
+
+#define M_PERFCTL_EXL			(1UL    <<  0)
+#define M_PERFCTL_KERNEL		(1UL    <<  1)
+#define M_PERFCTL_SUPERVISOR		(1UL    <<  2)
+#define M_PERFCTL_USER			(1UL    <<  3)
+#define M_PERFCTL_INTERRUPT_ENABLE	(1UL    <<  4)
+#define M_PERFCTL_EVENT(event)		((event) << 5)
+#define M_PERFCTL_WIDE			(1UL    << 30)
+#define M_PERFCTL_MORE			(1UL    << 31)
+
+#define M_COUNTER_OVERFLOW		(1UL    << 31)
+
+struct op_mips_model op_model_mipsxx;
+
+static struct mipsxx_register_config {
+	unsigned int control[4];
+	unsigned int counter[4];
+} reg;
+
+/* Compute all of the registers in preparation for enabling profiling.  */
+
+static void mipsxx_reg_setup(struct op_counter_config *ctr)
+{
+	unsigned int counters = op_model_mipsxx.num_counters;
+	int i;
+
+	/* Compute the performance counter control word.  */
+	/* For now count kernel and user mode */
+	for (i = 0; i < counters; i++) {
+		reg.control[i] = 0;
+		reg.counter[i] = 0;
+
+		if (!ctr[i].enabled)
+			continue;
+
+		reg.control[i] = M_PERFCTL_EVENT(ctr[i].event) |
+		                 M_PERFCTL_INTERRUPT_ENABLE;
+		if (ctr[i].kernel)
+			reg.control[i] |= M_PERFCTL_KERNEL;
+		if (ctr[i].user)
+			reg.control[i] |= M_PERFCTL_USER;
+		if (ctr[i].exl)
+			reg.control[i] |= M_PERFCTL_EXL;
+		reg.counter[i] = 0x80000000 - ctr[i].count;
+	}
+}
+
+/* Program all of the registers in preparation for enabling profiling.  */
+
+static void mipsxx_cpu_setup (void *args)
+{
+	unsigned int counters = op_model_mipsxx.num_counters;
+
+	switch (counters) {
+	case 4:
+		write_c0_perfctrl3(0);
+		write_c0_perfcntr3(reg.counter[3]);
+	case 3:
+		write_c0_perfctrl2(0);
+		write_c0_perfcntr2(reg.counter[2]);
+	case 2:
+		write_c0_perfctrl1(0);
+		write_c0_perfcntr1(reg.counter[1]);
+	case 1:
+		write_c0_perfctrl0(0);
+		write_c0_perfcntr0(reg.counter[0]);
+	}
+}
+
+/* Start all counters on current CPU */
+static void mipsxx_cpu_start(void *args)
+{
+	unsigned int counters = op_model_mipsxx.num_counters;
+
+	switch (counters) {
+	case 4:
+		write_c0_perfctrl3(reg.control[3]);
+	case 3:
+		write_c0_perfctrl2(reg.control[2]);
+	case 2:
+		write_c0_perfctrl1(reg.control[1]);
+	case 1:
+		write_c0_perfctrl0(reg.control[0]);
+	}
+}
+
+/* Stop all counters on current CPU */
+static void mipsxx_cpu_stop(void *args)
+{
+	unsigned int counters = op_model_mipsxx.num_counters;
+
+	switch (counters) {
+	case 4:
+		write_c0_perfctrl3(0);
+	case 3:
+		write_c0_perfctrl2(0);
+	case 2:
+		write_c0_perfctrl1(0);
+	case 1:
+		write_c0_perfctrl0(0);
+	}
+}
+
+static void mipsxx_perfcount_handler(struct pt_regs *regs)
+{
+	unsigned int counters = op_model_mipsxx.num_counters;
+	unsigned int control;
+	unsigned int counter;
+
+	switch (counters) {
+#define HANDLE_COUNTER(n)						\
+	case n + 1:							\
+		control = read_c0_perfctrl ## n();			\
+		counter = read_c0_perfcntr ## n();			\
+		if ((control & M_PERFCTL_INTERRUPT_ENABLE) &&		\
+		    (counter & M_COUNTER_OVERFLOW)) {			\
+			oprofile_add_sample(regs, n);			\
+			write_c0_perfcntr ## n(reg.counter[n]);		\
+		}
+	HANDLE_COUNTER(3)
+	HANDLE_COUNTER(2)
+	HANDLE_COUNTER(1)
+	HANDLE_COUNTER(0)
+	}
+}
+
+#define M_CONFIG1_PC	(1 << 4)
+
+static inline int n_counters(void)
+{
+	if (!(read_c0_config1() & M_CONFIG1_PC))
+		return 0;
+	if (!(read_c0_perfctrl0() & M_PERFCTL_MORE))
+		return 1;
+	if (!(read_c0_perfctrl1() & M_PERFCTL_MORE))
+		return 2;
+	if (!(read_c0_perfctrl2() & M_PERFCTL_MORE))
+		return 3;
+
+	return 4;
+}
+
+static inline void reset_counters(int counters)
+{
+	switch (counters) {
+	case 4:
+		write_c0_perfctrl3(0);
+		write_c0_perfcntr3(0);
+	case 3:
+		write_c0_perfctrl2(0);
+		write_c0_perfcntr2(0);
+	case 2:
+		write_c0_perfctrl1(0);
+		write_c0_perfcntr1(0);
+	case 1:
+		write_c0_perfctrl0(0);
+		write_c0_perfcntr0(0);
+	}
+}
+
+static int __init mipsxx_init(void)
+{
+	int counters;
+
+	counters = n_counters();
+	if (counters == 0)
+		return -ENODEV;
+
+	reset_counters(counters);
+
+	op_model_mipsxx.num_counters = counters;
+	switch (current_cpu_data.cputype) {
+	case CPU_24K:
+		op_model_mipsxx.cpu_type = "mips/24K";
+		break;
+
+	default:
+		printk(KERN_ERR "Profiling unsupported for this CPU\n");
+
+		return -ENODEV;
+	}
+
+	perf_irq = mipsxx_perfcount_handler;
+
+	return 0;
+}
+
+static void mipsxx_exit(void)
+{
+	reset_counters(op_model_mipsxx.num_counters);
+
+	perf_irq = null_perf_irq;
+}
+
+struct op_mips_model op_model_mipsxx = {
+	.reg_setup	= mipsxx_reg_setup,
+	.cpu_setup	= mipsxx_cpu_setup,
+	.init		= mipsxx_init,
+	.exit		= mipsxx_exit,
+	.cpu_start	= mipsxx_cpu_start,
+	.cpu_stop	= mipsxx_cpu_stop,
+};
diff --git a/arch/mips/oprofile/op_model_rm9000.c b/arch/mips/oprofile/op_model_rm9000.c
index bee47793cb1a..9b75e41c78ef 100644
--- a/arch/mips/oprofile/op_model_rm9000.c
+++ b/arch/mips/oprofile/op_model_rm9000.c
@@ -5,6 +5,7 @@
  *
  * Copyright (C) 2004 by Ralf Baechle
  */
+#include <linux/init.h>
 #include <linux/oprofile.h>
 #include <linux/interrupt.h>
 #include <linux/smp.h>
@@ -114,7 +115,7 @@ static irqreturn_t rm9000_perfcount_handler(int irq, void * dev_id,
 	return IRQ_HANDLED;
 }
 
-static int rm9000_init(void)
+static int __init rm9000_init(void)
 {
 	return request_irq(rm9000_perfcount_irq, rm9000_perfcount_handler,
 	                   0, "Perfcounter", NULL);
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 83d81c9cdc2b..741e67c9195a 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -15,7 +15,7 @@ obj-$(CONFIG_MIPS_GT96100)	+= ops-gt96100.o
 obj-$(CONFIG_PCI_MARVELL)	+= ops-marvell.o
 obj-$(CONFIG_MIPS_MSC)		+= ops-msc.o
 obj-$(CONFIG_MIPS_NILE4)	+= ops-nile4.o
-obj-$(CONFIG_MIPS_TX3927)	+= ops-jmr3927.o
+obj-$(CONFIG_MIPS_TX3927)	+= ops-tx3927.o
 obj-$(CONFIG_PCI_VR41XX)	+= ops-vr41xx.o pci-vr41xx.o
 obj-$(CONFIG_NEC_CMBVR4133)	+= fixup-vr4133.o
 
@@ -34,6 +34,7 @@ obj-$(CONFIG_MIPS_ITE8172)	+= fixup-ite8172g.o
 obj-$(CONFIG_MIPS_IVR)		+= fixup-ivr.o
 obj-$(CONFIG_SOC_AU1500)	+= fixup-au1000.o ops-au1000.o
 obj-$(CONFIG_SOC_AU1550)	+= fixup-au1000.o ops-au1000.o
+obj-$(CONFIG_SOC_PNX8550)	+= fixup-pnx8550.o ops-pnx8550.o
 obj-$(CONFIG_MIPS_MALTA)	+= fixup-malta.o
 obj-$(CONFIG_MOMENCO_JAGUAR_ATX)+= fixup-jaguar.o
 obj-$(CONFIG_MOMENCO_OCELOT)	+= fixup-ocelot.o pci-ocelot.o
@@ -45,11 +46,13 @@ obj-$(CONFIG_PMC_YOSEMITE)	+= fixup-yosemite.o ops-titan.o ops-titan-ht.o \
 obj-$(CONFIG_SGI_IP27)		+= pci-ip27.o
 obj-$(CONFIG_SGI_IP32)		+= fixup-ip32.o ops-mace.o pci-ip32.o
 obj-$(CONFIG_SIBYTE_SB1250)	+= fixup-sb1250.o pci-sb1250.o
+obj-$(CONFIG_SIBYTE_BCM1x80)	+= pci-bcm1480.o pci-bcm1480ht.o
 obj-$(CONFIG_SNI_RM200_PCI)	+= fixup-sni.o ops-sni.o
 obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
 obj-$(CONFIG_TANBAC_TB0226)	+= fixup-tb0226.o
 obj-$(CONFIG_TANBAC_TB0287)	+= fixup-tb0287.o
 obj-$(CONFIG_TOSHIBA_JMR3927)	+= fixup-jmr3927.o pci-jmr3927.o
 obj-$(CONFIG_TOSHIBA_RBTX4927)	+= fixup-rbtx4927.o ops-tx4927.o
+obj-$(CONFIG_TOSHIBA_RBTX4938)	+= fixup-tx4938.o ops-tx4938.o
 obj-$(CONFIG_VICTOR_MPC30X)	+= fixup-mpc30x.o
 obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capcella.o
diff --git a/arch/mips/pci/fixup-atlas.c b/arch/mips/pci/fixup-atlas.c
index 2406835833d6..87920b245931 100644
--- a/arch/mips/pci/fixup-atlas.c
+++ b/arch/mips/pci/fixup-atlas.c
@@ -1,14 +1,37 @@
+/*
+ * Copyright (C) 2003, 2004  Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2005  MIPS Technologies, Inc.  All rights reserved.
+ *	Author:	 Maciej W. Rozycki <macro@mips.com>
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
 #include <linux/config.h>
 #include <linux/init.h>
 #include <linux/pci.h>
+
 #include <asm/mips-boards/atlasint.h>
 
-#define INTD		ATLASINT_INTD
-#define INTC		ATLASINT_INTC
-#define INTB		ATLASINT_INTB
+#define PCIA		ATLASINT_PCIA
+#define PCIB		ATLASINT_PCIB
+#define PCIC		ATLASINT_PCIC
+#define PCID		ATLASINT_PCID
 #define INTA		ATLASINT_INTA
-#define SCSI		ATLASINT_SCSI
+#define INTB		ATLASINT_INTB
 #define ETH		ATLASINT_ETH
+#define INTC		ATLASINT_INTC
+#define SCSI		ATLASINT_SCSI
+#define INTD		ATLASINT_INTD
 
 static char irq_tab[][5] __initdata = {
 	/*      INTA    INTB    INTC    INTD */
@@ -27,13 +50,13 @@ static char irq_tab[][5] __initdata = {
 	{0,	0,	0,	0,	0 },	/* 12: Unused */
 	{0,	0,	0,	0,	0 },	/* 13: Unused */
 	{0,	0,	0,	0,	0 },	/* 14: Unused */
-	{0,	0,	0,	0,	0 },	/* 15: Unused */
+	{0,	PCIA,	PCIB,	PCIC,	PCID },	/* 15: cPCI (behind 21150) */
 	{0,	SCSI,	0,	0,	0 },	/* 16: SYM53C810A SCSI */
 	{0,	0,	0,	0,	0 },	/* 17: Core */
-	{0,	INTA,	INTB,	INTC,	INTD },	/* 18: PCI Slot 1 */
-	{0,	ETH,	0,	0,	0 },	/* 19: SAA9730 Ethernet */
-	{0,	0,	0,	0,	0 },	/* 20: PCI Slot 3 */
-	{0,	0,	0,	0,	0 }	/* 21: PCI Slot 4 */
+	{0,	INTA,	INTB,	INTC,	INTD },	/* 18: PCI Slot */
+	{0,	ETH,	0,	0,	0 },	/* 19: SAA9730 Eth. et al. */
+	{0,	0,	0,	0,	0 },	/* 20: Unused */
+	{0,	0,	0,	0,	0 }	/* 21: Unused */
 };
 
 int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
diff --git a/arch/mips/pci/fixup-au1000.c b/arch/mips/pci/fixup-au1000.c
index 39fe2b16fcec..c2f8304fe55b 100644
--- a/arch/mips/pci/fixup-au1000.c
+++ b/arch/mips/pci/fixup-au1000.c
@@ -26,7 +26,6 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
-#include <linux/config.h>
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
@@ -34,82 +33,7 @@
 
 #include <asm/mach-au1x00/au1000.h>
 
-/*
- * Shortcut
- */
-#ifdef CONFIG_SOC_AU1500
-#define INTA AU1000_PCI_INTA
-#define INTB AU1000_PCI_INTB
-#define INTC AU1000_PCI_INTC
-#define INTD AU1000_PCI_INTD
-#endif
-
-#ifdef CONFIG_SOC_AU1550
-#define INTA AU1550_PCI_INTA
-#define INTB AU1550_PCI_INTB
-#define INTC AU1550_PCI_INTC
-#define INTD AU1550_PCI_INTD
-#endif
-
-#define INTX    0xFF /* not valid */
-
-#ifdef CONFIG_MIPS_DB1500
-static char irq_tab_alchemy[][5] __initdata = {
- [12] =	{ -1, INTA, INTX, INTX, INTX},   /* IDSEL 12 - HPT371   */
- [13] =	{ -1, INTA, INTB, INTC, INTD},   /* IDSEL 13 - PCI slot */
-};
-#endif
-
-#ifdef CONFIG_MIPS_BOSPORUS
-static char irq_tab_alchemy[][5] __initdata = {
- [11] =	{ -1, INTA, INTB, INTX, INTX},   /* IDSEL 11 - miniPCI  */
- [12] =	{ -1, INTA, INTX, INTX, INTX},   /* IDSEL 12 - SN1741   */
- [13] =	{ -1, INTA, INTB, INTC, INTD},   /* IDSEL 13 - PCI slot */
-};
-#endif
-
-#ifdef CONFIG_MIPS_MIRAGE
-static char irq_tab_alchemy[][5] __initdata = {
- [11] =	{ -1, INTD, INTX, INTX, INTX},   /* IDSEL 11 - SMI VGX */
- [12] =	{ -1, INTX, INTX, INTC, INTX},   /* IDSEL 12 - PNX1300 */
- [13] =	{ -1, INTA, INTB, INTX, INTX},   /* IDSEL 13 - miniPCI */
-};
-#endif
-
-#ifdef CONFIG_MIPS_DB1550
-static char irq_tab_alchemy[][5] __initdata = {
- [11] =	{ -1, INTC, INTX, INTX, INTX},   /* IDSEL 11 - on-board HPT371    */
- [12] =	{ -1, INTB, INTC, INTD, INTA},   /* IDSEL 12 - PCI slot 2 (left)  */
- [13] =	{ -1, INTA, INTB, INTC, INTD},   /* IDSEL 13 - PCI slot 1 (right) */
-};
-#endif
-
-#ifdef CONFIG_MIPS_PB1500
-static char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, INTA, INTX, INTX, INTX},   /* IDSEL 12 - HPT370   */
- [13] = { -1, INTA, INTB, INTC, INTD},   /* IDSEL 13 - PCI slot */
-};
-#endif
-
-#ifdef CONFIG_MIPS_PB1550
-static char irq_tab_alchemy[][5] __initdata = {
- [12] =	{ -1, INTB, INTC, INTD, INTA},   /* IDSEL 12 - PCI slot 2 (left)  */
- [13] =	{ -1, INTA, INTB, INTC, INTD},   /* IDSEL 13 - PCI slot 1 (right) */
-};
-#endif
-
-#ifdef CONFIG_MIPS_MTX1
-static char irq_tab_alchemy[][5] __initdata = {
- [0] = { -1, INTA, INTB, INTX, INTX},   /* IDSEL 00 - AdapterA-Slot0 (top)    */
- [1] = { -1, INTB, INTA, INTX, INTX},   /* IDSEL 01 - AdapterA-Slot1 (bottom) */
- [2] = { -1, INTC, INTD, INTX, INTX},   /* IDSEL 02 - AdapterB-Slot0 (top)    */
- [3] = { -1, INTD, INTC, INTX, INTX},   /* IDSEL 03 - AdapterB-Slot1 (bottom) */
- [4] = { -1, INTA, INTB, INTX, INTX},   /* IDSEL 04 - AdapterC-Slot0 (top)    */
- [5] = { -1, INTB, INTA, INTX, INTX},   /* IDSEL 05 - AdapterC-Slot1 (bottom) */
- [6] = { -1, INTC, INTD, INTX, INTX},   /* IDSEL 06 - AdapterD-Slot0 (top)    */
- [7] = { -1, INTD, INTC, INTX, INTX},   /* IDSEL 07 - AdapterD-Slot1 (bottom) */
-};
-#endif
+extern char irq_tab_alchemy[][5];
 
 int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
diff --git a/arch/mips/pci/fixup-cobalt.c b/arch/mips/pci/fixup-cobalt.c
index 57e1ca2116bb..909292f50d06 100644
--- a/arch/mips/pci/fixup-cobalt.c
+++ b/arch/mips/pci/fixup-cobalt.c
@@ -21,6 +21,20 @@
 
 extern int cobalt_board_id;
 
+static void qube_raq_galileo_early_fixup(struct pci_dev *dev)
+{
+	if (dev->devfn == PCI_DEVFN(0, 0) &&
+		(dev->class >> 8) == PCI_CLASS_MEMORY_OTHER) {
+
+		dev->class = (PCI_CLASS_BRIDGE_HOST << 8) | (dev->class & 0xff);
+
+		printk(KERN_INFO "Galileo: fixed bridge class\n");
+	}
+}
+
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_GT64111,
+	 qube_raq_galileo_early_fixup);
+
 static void qube_raq_via_bmIDE_fixup(struct pci_dev *dev)
 {
 	unsigned short cfgword;
@@ -48,6 +62,9 @@ static void qube_raq_galileo_fixup(struct pci_dev *dev)
 {
 	unsigned short galileo_id;
 
+	if (dev->devfn != PCI_DEVFN(0, 0))
+		return;
+
 	/* Fix PCI latency-timer and cache-line-size values in Galileo
 	 * host bridge.
 	 */
@@ -55,6 +72,13 @@ static void qube_raq_galileo_fixup(struct pci_dev *dev)
 	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 7);
 
 	/*
+	 * The code described by the comment below has been removed
+	 * as it causes bus mastering by the Ethernet controllers
+	 * to break under any kind of network load. We always set
+	 * the retry timeouts to their maximum.
+	 *
+	 * --x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--
+	 *
 	 * On all machines prior to Q2, we had the STOP line disconnected
 	 * from Galileo to VIA on PCI.  The new Galileo does not function
 	 * correctly unless we have it connected.
@@ -64,21 +88,43 @@ static void qube_raq_galileo_fixup(struct pci_dev *dev)
 	 */
 	pci_read_config_word(dev, PCI_REVISION_ID, &galileo_id);
 	galileo_id &= 0xff;	/* mask off class info */
+
+ 	printk(KERN_INFO "Galileo: revision %u\n", galileo_id);
+
+#if 0
 	if (galileo_id >= 0x10) {
 		/* New Galileo, assumes PCI stop line to VIA is connected. */
 		GALILEO_OUTL(0x4020, GT_PCI0_TOR_OFS);
-	} else if (galileo_id == 0x1 || galileo_id == 0x2) {
+	} else if (galileo_id == 0x1 || galileo_id == 0x2)
+#endif
+	{
 		signed int timeo;
 		/* XXX WE MUST DO THIS ELSE GALILEO LOCKS UP! -DaveM */
 		timeo = GALILEO_INL(GT_PCI0_TOR_OFS);
 		/* Old Galileo, assumes PCI STOP line to VIA is disconnected. */
-		GALILEO_OUTL(0xffff, GT_PCI0_TOR_OFS);
+		GALILEO_OUTL(
+			(0xff << 16) |		/* retry count */
+			(0xff << 8) |		/* timeout 1   */
+			0xff,			/* timeout 0   */
+			GT_PCI0_TOR_OFS);
+
+		/* enable PCI retry exceeded interrupt */
+		GALILEO_OUTL(GALILEO_INTR_RETRY_CTR | GALILEO_INL(GT_INTRMASK_OFS), GT_INTRMASK_OFS);
 	}
 }
 
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_GALILEO, PCI_ANY_ID,
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_GT64111,
 	 qube_raq_galileo_fixup);
 
+static char irq_tab_qube1[] __initdata = {
+  [COBALT_PCICONF_CPU]     = 0,
+  [COBALT_PCICONF_ETH0]    = COBALT_QUBE1_ETH0_IRQ,
+  [COBALT_PCICONF_RAQSCSI] = COBALT_SCSI_IRQ,
+  [COBALT_PCICONF_VIA]     = 0,
+  [COBALT_PCICONF_PCISLOT] = COBALT_QUBE_SLOT_IRQ,
+  [COBALT_PCICONF_ETH1]    = 0
+};
+
 static char irq_tab_cobalt[] __initdata = {
   [COBALT_PCICONF_CPU]     = 0,
   [COBALT_PCICONF_ETH0]    = COBALT_ETH0_IRQ,
@@ -99,6 +145,9 @@ static char irq_tab_raq2[] __initdata = {
 
 int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
+	if (cobalt_board_id < COBALT_BRD_ID_QUBE2)
+		return irq_tab_qube1[slot];
+
 	if (cobalt_board_id == COBALT_BRD_ID_RAQ2)
 		return irq_tab_raq2[slot];
 
diff --git a/arch/mips/pci/fixup-pnx8550.c b/arch/mips/pci/fixup-pnx8550.c
new file mode 100644
index 000000000000..4256b3b30b77
--- /dev/null
+++ b/arch/mips/pci/fixup-pnx8550.c
@@ -0,0 +1,57 @@
+/*
+ *  Philips PNX8550 pci fixups.
+ *
+ *  Copyright 2005 Embedded Alley Solutions, Inc
+ *  source@embeddealley.com
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/mach-pnx8550/pci.h>
+#include <asm/mach-pnx8550/int.h>
+
+
+#undef	DEBUG
+#ifdef 	DEBUG
+#define	DBG(x...)	printk(x)
+#else
+#define	DBG(x...)
+#endif
+
+extern char irq_tab_jbs[][5];
+
+void __init pcibios_fixup_resources(struct pci_dev *dev)
+{
+	/* no need to fixup IO resources */
+}
+
+void __init pcibios_fixup(void)
+{
+	/* nothing to do here */
+}
+
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	return irq_tab_jbs[slot][pin];
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}
diff --git a/arch/mips/pci/fixup-tb0226.c b/arch/mips/pci/fixup-tb0226.c
index 61513d5d97da..b5d42b12de10 100644
--- a/arch/mips/pci/fixup-tb0226.c
+++ b/arch/mips/pci/fixup-tb0226.c
@@ -1,7 +1,7 @@
 /*
  *  fixup-tb0226.c, The TANBAC TB0226 specific PCI fixups.
  *
- *  Copyright (C) 2002-2004  Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
+ *  Copyright (C) 2002-2005  Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -20,6 +20,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 
+#include <asm/vr41xx/giu.h>
 #include <asm/vr41xx/tb0226.h>
 
 int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
@@ -29,42 +30,42 @@ int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 	switch (slot) {
 	case 12:
 		vr41xx_set_irq_trigger(GD82559_1_PIN,
-				       TRIGGER_LEVEL,
-				       SIGNAL_THROUGH);
-		vr41xx_set_irq_level(GD82559_1_PIN, LEVEL_LOW);
+				       IRQ_TRIGGER_LEVEL,
+				       IRQ_SIGNAL_THROUGH);
+		vr41xx_set_irq_level(GD82559_1_PIN, IRQ_LEVEL_LOW);
 		irq = GD82559_1_IRQ;
 		break;
 	case 13:
 		vr41xx_set_irq_trigger(GD82559_2_PIN,
-				       TRIGGER_LEVEL,
-				       SIGNAL_THROUGH);
-		vr41xx_set_irq_level(GD82559_2_PIN, LEVEL_LOW);
+				       IRQ_TRIGGER_LEVEL,
+				       IRQ_SIGNAL_THROUGH);
+		vr41xx_set_irq_level(GD82559_2_PIN, IRQ_LEVEL_LOW);
 		irq = GD82559_2_IRQ;
 		break;
 	case 14:
 		switch (pin) {
 		case 1:
 			vr41xx_set_irq_trigger(UPD720100_INTA_PIN,
-					       TRIGGER_LEVEL,
-					       SIGNAL_THROUGH);
+					       IRQ_TRIGGER_LEVEL,
+					       IRQ_SIGNAL_THROUGH);
 			vr41xx_set_irq_level(UPD720100_INTA_PIN,
-					     LEVEL_LOW);
+					     IRQ_LEVEL_LOW);
 			irq = UPD720100_INTA_IRQ;
 			break;
 		case 2:
 			vr41xx_set_irq_trigger(UPD720100_INTB_PIN,
-					       TRIGGER_LEVEL,
-					       SIGNAL_THROUGH);
+					       IRQ_TRIGGER_LEVEL,
+					       IRQ_SIGNAL_THROUGH);
 			vr41xx_set_irq_level(UPD720100_INTB_PIN,
-					     LEVEL_LOW);
+					     IRQ_LEVEL_LOW);
 			irq = UPD720100_INTB_IRQ;
 			break;
 		case 3:
 			vr41xx_set_irq_trigger(UPD720100_INTC_PIN,
-					       TRIGGER_LEVEL,
-					       SIGNAL_THROUGH);
+					       IRQ_TRIGGER_LEVEL,
+					       IRQ_SIGNAL_THROUGH);
 			vr41xx_set_irq_level(UPD720100_INTC_PIN,
-					     LEVEL_LOW);
+					     IRQ_LEVEL_LOW);
 			irq = UPD720100_INTC_IRQ;
 			break;
 		default:
diff --git a/arch/mips/pci/fixup-tx4938.c b/arch/mips/pci/fixup-tx4938.c
new file mode 100644
index 000000000000..f455520ada88
--- /dev/null
+++ b/arch/mips/pci/fixup-tx4938.c
@@ -0,0 +1,92 @@
+/*
+ * Toshiba rbtx4938 pci routines
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/tx4938/rbtx4938.h>
+
+extern struct pci_controller tx4938_pci_controller[];
+
+int pci_get_irq(struct pci_dev *dev, int pin)
+{
+	int irq = pin;
+	u8 slot = PCI_SLOT(dev->devfn);
+	struct pci_controller *controller = (struct pci_controller *)dev->sysdata;
+
+	if (controller == &tx4938_pci_controller[1]) {
+		/* TX4938 PCIC1 */
+		switch (slot) {
+		case TX4938_PCIC_IDSEL_AD_TO_SLOT(31):
+			if (tx4938_ccfgptr->pcfg & TX4938_PCFG_ETH0_SEL)
+				return RBTX4938_IRQ_IRC + TX4938_IR_ETH0;
+			break;
+		case TX4938_PCIC_IDSEL_AD_TO_SLOT(30):
+			if (tx4938_ccfgptr->pcfg & TX4938_PCFG_ETH1_SEL)
+				return RBTX4938_IRQ_IRC + TX4938_IR_ETH1;
+			break;
+		}
+		return 0;
+	}
+
+	/* IRQ rotation */
+	irq--;	/* 0-3 */
+	if (dev->bus->parent == NULL &&
+	    (slot == TX4938_PCIC_IDSEL_AD_TO_SLOT(23))) {
+		/* PCI CardSlot (IDSEL=A23) */
+		/* PCIA => PCIA (IDSEL=A23) */
+		irq = (irq + 0 + slot) % 4;
+	} else {
+		/* PCI Backplane */
+		irq = (irq + 33 - slot) % 4;
+	}
+	irq++;	/* 1-4 */
+
+	switch (irq) {
+	case 1:
+		irq = RBTX4938_IRQ_IOC_PCIA;
+		break;
+	case 2:
+		irq = RBTX4938_IRQ_IOC_PCIB;
+		break;
+	case 3:
+		irq = RBTX4938_IRQ_IOC_PCIC;
+		break;
+	case 4:
+		irq = RBTX4938_IRQ_IOC_PCID;
+		break;
+	}
+	return irq;
+}
+
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	unsigned char irq = 0;
+
+	irq = pci_get_irq(dev, pin);
+
+	printk(KERN_INFO "PCI: 0x%02x:0x%02x(0x%02x,0x%02x) IRQ=%d\n",
+	       dev->bus->number, dev->devfn, PCI_SLOT(dev->devfn),
+	       PCI_FUNC(dev->devfn), irq);
+
+	return irq;
+}
+
+/*
+ * Do platform specific device initialization at pci_enable_device() time
+ */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}
+
diff --git a/arch/mips/pci/ops-au1000.c b/arch/mips/pci/ops-au1000.c
index c1c91ca0f9c2..be1420126c42 100644
--- a/arch/mips/pci/ops-au1000.c
+++ b/arch/mips/pci/ops-au1000.c
@@ -50,11 +50,6 @@
 
 int (*board_pci_idsel)(unsigned int devsel, int assert);
 
-/* CP0 hazard avoidance. */
-#define BARRIER __asm__ __volatile__(".set noreorder\n\t" \
-				     "nop; nop; nop; nop;\t" \
-				     ".set reorder\n\t")
-
 void mod_wired_entry(int entry, unsigned long entrylo0,
 		unsigned long entrylo1, unsigned long entryhi,
 		unsigned long pagemask)
@@ -66,16 +61,12 @@ void mod_wired_entry(int entry, unsigned long entrylo0,
 	old_ctx = read_c0_entryhi() & 0xff;
 	old_pagemask = read_c0_pagemask();
 	write_c0_index(entry);
-	BARRIER;
 	write_c0_pagemask(pagemask);
 	write_c0_entryhi(entryhi);
 	write_c0_entrylo0(entrylo0);
 	write_c0_entrylo1(entrylo1);
-	BARRIER;
 	tlb_write_indexed();
-	BARRIER;
 	write_c0_entryhi(old_ctx);
-	BARRIER;
 	write_c0_pagemask(old_pagemask);
 }
 
@@ -128,9 +119,8 @@ static int config_access(unsigned char access_type, struct pci_bus *bus,
 		last_entryLo0  = last_entryLo1 = 0xffffffff;
 	}
 
-	/* Since the Au1xxx doesn't do the idsel timing exactly to spec,
-	 * many board vendors implement their own off-chip idsel, so call
-	 * it now.  If it doesn't succeed, may as well bail out at this point.
+	/* Allow board vendors to implement their own off-chip idsel.
+	 * If it doesn't succeed, may as well bail out at this point.
 	 */
 	if (board_pci_idsel) {
 		if (board_pci_idsel(device, 1) == 0) {
diff --git a/arch/mips/pci/ops-bonito64.c b/arch/mips/pci/ops-bonito64.c
index 4b4e086a7eb1..dc35270b65a2 100644
--- a/arch/mips/pci/ops-bonito64.c
+++ b/arch/mips/pci/ops-bonito64.c
@@ -1,6 +1,8 @@
 /*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999, 2000 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 1999, 2000, 2004  MIPS Technologies, Inc.
+ *	All rights reserved.
+ *	Authors: Carsten Langgaard <carstenl@mips.com>
+ *		 Maciej W. Rozycki <macro@mips.com>
  *
  *  This program is free software; you can distribute it and/or modify it
  *  under the terms of the GNU General Public License (Version 2) as
@@ -17,7 +19,6 @@
  *
  * MIPS boards specific PCI support.
  */
-#include <linux/config.h>
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
@@ -57,13 +58,6 @@ static int bonito64_pcibios_config_access(unsigned char access_type,
 		return -1;
 	}
 
-#ifdef CONFIG_MIPS_BOARDS_GEN
-	if ((busnum == 0) && (PCI_SLOT(devfn) == 17)) {
-		/* MIPS Core boards have Bonito connected as device 17 */
-		return -1;
-	}
-#endif
-
 	/* Clear cause register bits */
 	BONITO_PCICMD |= (BONITO_PCICMD_MABORT_CLR |
 			  BONITO_PCICMD_MTABORT_CLR);
diff --git a/arch/mips/pci/ops-gt64111.c b/arch/mips/pci/ops-gt64111.c
index c5b0fc184c2a..c1807934768d 100644
--- a/arch/mips/pci/ops-gt64111.c
+++ b/arch/mips/pci/ops-gt64111.c
@@ -18,15 +18,15 @@
 #include <asm/cobalt/cobalt.h>
 
 /*
- * Accessing device 31 hangs the GT64120.  Not sure if this will also hang
- * the GT64111, let's be paranoid for now.
+ * Device 31 on the GT64111 is used to generate PCI special
+ * cycles, so we shouldn't expected to find a device there ...
  */
 static inline int pci_range_ck(struct pci_bus *bus, unsigned int devfn)
 {
-	if (bus->number == 0 && devfn == PCI_DEVFN(31, 0))
-		return -1;
+	if (bus->number == 0 && PCI_SLOT(devfn) < 31)
+		return 0;
 
-	return 0;
+	return -1;
 }
 
 static int gt64111_pci_read_config(struct pci_bus *bus, unsigned int devfn,
diff --git a/arch/mips/pci/ops-gt64120.c b/arch/mips/pci/ops-gt64120.c
index 7b99dfa33dfc..6335844d607a 100644
--- a/arch/mips/pci/ops-gt64120.c
+++ b/arch/mips/pci/ops-gt64120.c
@@ -1,6 +1,8 @@
 /*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999, 2000 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 1999, 2000, 2004  MIPS Technologies, Inc.
+ *	All rights reserved.
+ *	Authors: Carsten Langgaard <carstenl@mips.com>
+ *		 Maciej W. Rozycki <macro@mips.com>
  *
  *  This program is free software; you can distribute it and/or modify it
  *  under the terms of the GNU General Public License (Version 2) as
@@ -43,10 +45,6 @@ static int gt64120_pcibios_config_access(unsigned char access_type,
 	unsigned char busnum = bus->number;
 	u32 intr;
 
-	if ((busnum == 0) && (PCI_SLOT(devfn) == 0))
-		/* Galileo itself is devfn 0, don't move it around */
-		return -1;
-
 	if ((busnum == 0) && (devfn >= PCI_DEVFN(31, 0)))
 		return -1;	/* Because of a bug in the galileo (for slot 31). */
 
diff --git a/arch/mips/pci/ops-msc.c b/arch/mips/pci/ops-msc.c
index 7bc099643a9d..5d9fbb0f4670 100644
--- a/arch/mips/pci/ops-msc.c
+++ b/arch/mips/pci/ops-msc.c
@@ -21,7 +21,6 @@
  * MIPS boards specific PCI support.
  *
  */
-#include <linux/config.h>
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
@@ -49,34 +48,17 @@ static int msc_pcibios_config_access(unsigned char access_type,
 	struct pci_bus *bus, unsigned int devfn, int where, u32 * data)
 {
 	unsigned char busnum = bus->number;
-	unsigned char type;
 	u32 intr;
 
-#ifdef CONFIG_MIPS_BOARDS_GEN
-	if ((busnum == 0) && (PCI_SLOT(devfn) == 17)) {
-		/* MIPS Core boards have SOCit connected as device 17 */
-		return -1;
-	}
-#endif
-
 	/* Clear status register bits. */
 	MSC_WRITE(MSC01_PCI_INTSTAT,
 		  (MSC01_PCI_INTCFG_MA_BIT | MSC01_PCI_INTCFG_TA_BIT));
 
-	/* Setup address */
-	if (busnum == 0)
-		type = 0;	/* Type 0 */
-	else
-		type = 1;	/* Type 1 */
-
 	MSC_WRITE(MSC01_PCI_CFGADDR,
 		  ((busnum << MSC01_PCI_CFGADDR_BNUM_SHF) |
-		   (PCI_SLOT(devfn) << MSC01_PCI_CFGADDR_DNUM_SHF)
-		   | (PCI_FUNC(devfn) <<
-		      MSC01_PCI_CFGADDR_FNUM_SHF) | ((where /
-						      4) <<
-						     MSC01_PCI_CFGADDR_RNUM_SHF)
-		   | (type)));
+		   (PCI_SLOT(devfn) << MSC01_PCI_CFGADDR_DNUM_SHF) |
+		   (PCI_FUNC(devfn) << MSC01_PCI_CFGADDR_FNUM_SHF) |
+		   ((where / 4) << MSC01_PCI_CFGADDR_RNUM_SHF)));
 
 	/* Perform access */
 	if (access_type == PCI_ACCESS_WRITE)
@@ -86,15 +68,12 @@ static int msc_pcibios_config_access(unsigned char access_type,
 
 	/* Detect Master/Target abort */
 	MSC_READ(MSC01_PCI_INTSTAT, intr);
-	if (intr & (MSC01_PCI_INTCFG_MA_BIT |
-		    MSC01_PCI_INTCFG_TA_BIT)) {
+	if (intr & (MSC01_PCI_INTCFG_MA_BIT | MSC01_PCI_INTCFG_TA_BIT)) {
 		/* Error occurred */
 
 		/* Clear bits */
-		MSC_READ(MSC01_PCI_INTSTAT, intr);
 		MSC_WRITE(MSC01_PCI_INTSTAT,
-			  (MSC01_PCI_INTCFG_MA_BIT |
-			   MSC01_PCI_INTCFG_TA_BIT));
+			  (MSC01_PCI_INTCFG_MA_BIT | MSC01_PCI_INTCFG_TA_BIT));
 
 		return -1;
 	}
diff --git a/arch/mips/pci/ops-nile4.c b/arch/mips/pci/ops-nile4.c
index a7169928b351..a8d38dc8c504 100644
--- a/arch/mips/pci/ops-nile4.c
+++ b/arch/mips/pci/ops-nile4.c
@@ -15,7 +15,7 @@
 
 volatile unsigned long *const vrc_pciregs = (void *) Vrc5074_BASE;
 
-static spinlock_t nile4_pci_lock;
+static DEFINE_SPINLOCK(nile4_pci_lock);
 
 static int nile4_pcibios_config_access(unsigned char access_type,
 	struct pci_bus *bus, unsigned int devfn, int where, u32 * val)
diff --git a/arch/mips/pci/ops-pnx8550.c b/arch/mips/pci/ops-pnx8550.c
new file mode 100644
index 000000000000..454b65cc3354
--- /dev/null
+++ b/arch/mips/pci/ops-pnx8550.c
@@ -0,0 +1,284 @@
+/*
+ *
+ *  BRIEF MODULE DESCRIPTION
+ *
+ *  2.6 port, Embedded Alley Solutions, Inc
+ *
+ *  Based on:
+ *  Author: source@mvista.com
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/vmalloc.h>
+#include <linux/delay.h>
+
+#include <asm/mach-pnx8550/pci.h>
+#include <asm/mach-pnx8550/glb.h>
+#include <asm/debug.h>
+
+
+static inline void clear_status(void)
+{
+	unsigned long pci_stat;
+
+	pci_stat = inl(PCI_BASE | PCI_GPPM_STATUS);
+	outl(pci_stat, PCI_BASE | PCI_GPPM_ICLR);
+}
+
+static inline unsigned int
+calc_cfg_addr(struct pci_bus *bus, unsigned int devfn, int where)
+{
+	unsigned int addr;
+
+	addr = ((bus->number > 0) ? (((bus->number & 0xff) << PCI_CFG_BUS_SHIFT) | 1) : 0);
+	addr |= ((devfn & 0xff) << PCI_CFG_FUNC_SHIFT) | (where & 0xfc);
+
+	return addr;
+}
+
+static int
+config_access(unsigned int pci_cmd, struct pci_bus *bus, unsigned int devfn, int where, unsigned int pci_mode, unsigned int *val)
+{
+	unsigned int flags;
+	unsigned long loops = 0;
+	unsigned long ioaddr = calc_cfg_addr(bus, devfn, where);
+
+	local_irq_save(flags);
+	/*Clear pending interrupt status */
+	if (inl(PCI_BASE | PCI_GPPM_STATUS)) {
+		clear_status();
+		while (!(inl(PCI_BASE | PCI_GPPM_STATUS) == 0)) ;
+	}
+
+	outl(ioaddr, PCI_BASE | PCI_GPPM_ADDR);
+
+	if ((pci_cmd == PCI_CMD_IOW) || (pci_cmd == PCI_CMD_CONFIG_WRITE))
+		outl(*val, PCI_BASE | PCI_GPPM_WDAT);
+
+	outl(INIT_PCI_CYCLE | pci_cmd | (pci_mode & PCI_BYTE_ENABLE_MASK),
+	     PCI_BASE | PCI_GPPM_CTRL);
+
+	loops =
+	    ((loops_per_jiffy *
+	      PCI_IO_JIFFIES_TIMEOUT) >> (PCI_IO_JIFFIES_SHIFT));
+	while (1) {
+		if (inl(PCI_BASE | PCI_GPPM_STATUS) & GPPM_DONE) {
+			if ((pci_cmd == PCI_CMD_IOR) ||
+			    (pci_cmd == PCI_CMD_CONFIG_READ))
+				*val = inl(PCI_BASE | PCI_GPPM_RDAT);
+			clear_status();
+			local_irq_restore(flags);
+			return PCIBIOS_SUCCESSFUL;
+		} else if (inl(PCI_BASE | PCI_GPPM_STATUS) & GPPM_R_MABORT) {
+			break;
+		}
+
+		loops--;
+		if (loops == 0) {
+			printk("%s : Arbiter Locked.\n", __FUNCTION__);
+		}
+	}
+
+	clear_status();
+	if ((pci_cmd == PCI_CMD_IOR) || (pci_cmd == PCI_CMD_IOW)) {
+		printk("%s timeout (GPPM_CTRL=%X) ioaddr %lX pci_cmd %X\n",
+		       __FUNCTION__, inl(PCI_BASE | PCI_GPPM_CTRL), ioaddr,
+		       pci_cmd);
+	}
+
+	if ((pci_cmd == PCI_CMD_IOR) || (pci_cmd == PCI_CMD_CONFIG_READ))
+		*val = 0xffffffff;
+	local_irq_restore(flags);
+	return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+/*
+ * We can't address 8 and 16 bit words directly.  Instead we have to
+ * read/write a 32bit word and mask/modify the data we actually want.
+ */
+static int
+read_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 * val)
+{
+	unsigned int data = 0;
+	int err;
+
+	if (bus == 0)
+		return -1;
+
+	err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, ~(1 << (where & 3)), &data);
+	switch (where & 0x03) {
+	case 0:
+		*val = (unsigned char)(data & 0x000000ff);
+		break;
+	case 1:
+		*val = (unsigned char)((data & 0x0000ff00) >> 8);
+		break;
+	case 2:
+		*val = (unsigned char)((data & 0x00ff0000) >> 16);
+		break;
+	case 3:
+		*val = (unsigned char)((data & 0xff000000) >> 24);
+		break;
+	}
+
+	return err;
+}
+
+static int
+read_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 * val)
+{
+	unsigned int data = 0;
+	int err;
+
+	if (bus == 0)
+		return -1;
+
+	if (where & 0x01)
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, ~(3 << (where & 3)), &data);
+	switch (where & 0x02) {
+	case 0:
+		*val = (unsigned short)(data & 0x0000ffff);
+		break;
+	case 2:
+		*val = (unsigned short)((data & 0xffff0000) >> 16);
+		break;
+	}
+
+	return err;
+}
+
+static int
+read_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 * val)
+{
+	int err;
+	if (bus == 0)
+		return -1;
+
+	if (where & 0x03)
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, 0, val);
+
+	return err;
+}
+
+static int
+write_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 val)
+{
+	unsigned int data = (unsigned int)val;
+	int err;
+
+	if (bus == 0)
+		return -1;
+
+	switch (where & 0x03) {
+	case 1:
+		data = (data << 8);
+		break;
+	case 2:
+		data = (data << 16);
+		break;
+	case 3:
+		data = (data << 24);
+		break;
+	default:
+		break;
+	}
+
+	err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, ~(1 << (where & 3)), &data);
+
+	return err;
+}
+
+static int
+write_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 val)
+{
+	unsigned int data = (unsigned int)val;
+	int err;
+
+	if (bus == 0)
+		return -1;
+
+	if (where & 0x01)
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	switch (where & 0x02) {
+	case 2:
+		data = (data << 16);
+		break;
+	default:
+		break;
+	}
+	err = config_access(PCI_CMD_CONFIG_WRITE, bus, devfn, where, ~(3 << (where & 3)), &data);
+
+	return err;
+}
+
+static int
+write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 val)
+{
+	int err;
+	if (bus == 0)
+		return -1;
+
+	if (where & 0x03)
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	err = config_access(PCI_CMD_CONFIG_WRITE, bus, devfn, where, 0, &val);
+
+	return err;
+}
+
+static int config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val)
+{
+	switch (size) {
+	case 1: {
+			u8 _val;
+			int rc = read_config_byte(bus, devfn, where, &_val);
+			*val = _val;
+			return rc;
+		}
+       case 2: {
+			u16 _val;
+			int rc = read_config_word(bus, devfn, where, &_val);
+			*val = _val;
+			return rc;
+		}
+	default:
+		return read_config_dword(bus, devfn, where, val);
+	}
+}
+
+static int config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
+{
+	switch (size) {
+	case 1:
+		return write_config_byte(bus, devfn, where, (u8) val);
+	case 2:
+		return write_config_word(bus, devfn, where, (u16) val);
+	default:
+		return write_config_dword(bus, devfn, where, val);
+	}
+}
+
+struct pci_ops pnx8550_pci_ops = {
+	config_read,
+	config_write
+};
diff --git a/arch/mips/pci/ops-tx3927.c b/arch/mips/pci/ops-tx3927.c
index 0e0daadc303d..42530a0b84b3 100644
--- a/arch/mips/pci/ops-tx3927.c
+++ b/arch/mips/pci/ops-tx3927.c
@@ -72,13 +72,9 @@ static inline int check_abort(void)
 static int jmr3927_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 	int where, int size, u32 * val)
 {
-	int ret, busno;
+	int ret;
 
-	/* check if the bus is top-level */
-	if (bus->parent != NULL)
-		busno = bus->number;
-
-	ret = mkaddr(busno, devfn, where);
+	ret = mkaddr(bus->number, devfn, where);
 	if (ret)
 		return ret;
 
@@ -102,15 +98,9 @@ static int jmr3927_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 static int jmr3927_pci_write_config(struct pci_bus *bus, unsigned int devfn,
 	int where, int size, u32 val)
 {
-	int ret, busno;
-
-	/* check if the bus is top-level */
-	if (bus->parent != NULL)
-		bus = bus->number;
-	else
-		bus = 0;
+	int ret;
 
-	ret = mkaddr(busno, devfn, where);
+	ret = mkaddr(bus->number, devfn, where);
 	if (ret)
 		return ret;
 
@@ -120,7 +110,7 @@ static int jmr3927_pci_write_config(struct pci_bus *bus, unsigned int devfn,
 		break;
 
 	case 2:
-		*(volatile u16 *) (unsigned longulong) & tx3927_pcicptr->icd | (where & 2)) =
+		*(volatile u16 *) ((unsigned long) & tx3927_pcicptr->icd | (where & 2)) =
 	    cpu_to_le16(val);
 		break;
 
@@ -137,8 +127,8 @@ static int jmr3927_pci_write_config(struct pci_bus *bus, unsigned int devfn,
 }
 
 struct pci_ops jmr3927_pci_ops = {
-	jmr3927_pcibios_read_config,
-	jmr3927_pcibios_write_config,
+	jmr3927_pci_read_config,
+	jmr3927_pci_write_config,
 };
 
 
@@ -159,15 +149,14 @@ unsigned long tc_readl(volatile __u32 * addr)
 {
 	unsigned long val;
 
-	addr = PHYSADDR(addr);
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr =
-	    (unsigned long) addr;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
+	    (unsigned long) CPHYSADDR(addr);
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
 	    (PCI_IPCIBE_ICMD_MEMREAD << PCI_IPCIBE_ICMD_SHIFT) |
 	    PCI_IPCIBE_IBE_LONG;
 	while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
 	val =
-	    le32_to_cpu(*(volatile u32 *) (ulong) & tx3927_pcicptr->
+	    le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr->
 			ipcidata);
 	/* clear by setting */
 	tx3927_pcicptr->istat |= PCI_ISTAT_IDICC;
@@ -176,12 +165,11 @@ unsigned long tc_readl(volatile __u32 * addr)
 
 void tc_writel(unsigned long data, volatile __u32 * addr)
 {
-	addr = PHYSADDR(addr);
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcidata =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata =
 	    cpu_to_le32(data);
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr =
-	    (unsigned long) addr;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
+	    (unsigned long) CPHYSADDR(addr);
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
 	    (PCI_IPCIBE_ICMD_MEMWRITE << PCI_IPCIBE_ICMD_SHIFT) |
 	    PCI_IPCIBE_IBE_LONG;
 	while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
@@ -198,21 +186,15 @@ unsigned char tx_ioinb(unsigned char *addr)
 
 	ioaddr = (unsigned long) addr;
 	offset = ioaddr & 0x3;
-	if (offset == 0)
-		byte = 0x7;
-	else if (offset == 1)
-		byte = 0xb;
-	else if (offset == 2)
-		byte = 0xd;
-	else if (offset == 3)
-		byte = 0xe;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr =
+	byte = 0xf & ~(8 >> offset);
+
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
 	    (unsigned long) ioaddr;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
 	    (PCI_IPCIBE_ICMD_IOREAD << PCI_IPCIBE_ICMD_SHIFT) | byte;
 	while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
 	val =
-	    le32_to_cpu(*(volatile u32 *) (ulong) & tx3927_pcicptr->
+	    le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr->
 			ipcidata);
 	val = val & 0xff;
 	/* clear by setting */
@@ -229,18 +211,12 @@ void tx_iooutb(unsigned long data, unsigned char *addr)
 	data = data | (data << 8) | (data << 16) | (data << 24);
 	ioaddr = (unsigned long) addr;
 	offset = ioaddr & 0x3;
-	if (offset == 0)
-		byte = 0x7;
-	else if (offset == 1)
-		byte = 0xb;
-	else if (offset == 2)
-		byte = 0xd;
-	else if (offset == 3)
-		byte = 0xe;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcidata = data;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr =
+	byte = 0xf & ~(8 >> offset);
+
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata = data;
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
 	    (unsigned long) ioaddr;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
 	    (PCI_IPCIBE_ICMD_IOWRITE << PCI_IPCIBE_ICMD_SHIFT) | byte;
 	while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
 	/* clear by setting */
@@ -255,18 +231,16 @@ unsigned short tx_ioinw(unsigned short *addr)
 	int byte;
 
 	ioaddr = (unsigned long) addr;
-	offset = ioaddr & 0x3;
-	if (offset == 0)
-		byte = 0x3;
-	else if (offset == 2)
-		byte = 0xc;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr =
+	offset = ioaddr & 0x2;
+	byte = 3 << offset;
+
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
 	    (unsigned long) ioaddr;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
 	    (PCI_IPCIBE_ICMD_IOREAD << PCI_IPCIBE_ICMD_SHIFT) | byte;
 	while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
 	val =
-	    le32_to_cpu(*(volatile u32 *) (ulong) & tx3927_pcicptr->
+	    le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr->
 			ipcidata);
 	val = val & 0xffff;
 	/* clear by setting */
@@ -283,15 +257,13 @@ void tx_iooutw(unsigned long data, unsigned short *addr)
 
 	data = data | (data << 16);
 	ioaddr = (unsigned long) addr;
-	offset = ioaddr & 0x3;
-	if (offset == 0)
-		byte = 0x3;
-	else if (offset == 2)
-		byte = 0xc;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcidata = data;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr =
+	offset = ioaddr & 0x2;
+	byte = 3 << offset;
+
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata = data;
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
 	    (unsigned long) ioaddr;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
 	    (PCI_IPCIBE_ICMD_IOWRITE << PCI_IPCIBE_ICMD_SHIFT) | byte;
 	while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
 	/* clear by setting */
@@ -304,14 +276,14 @@ unsigned long tx_ioinl(unsigned int *addr)
 	__u32 ioaddr;
 
 	ioaddr = (unsigned long) addr;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
 	    (unsigned long) ioaddr;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
 	    (PCI_IPCIBE_ICMD_IOREAD << PCI_IPCIBE_ICMD_SHIFT) |
 	    PCI_IPCIBE_IBE_LONG;
 	while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
 	val =
-	    le32_to_cpu(*(volatile u32 *) (ulong) & tx3927_pcicptr->
+	    le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr->
 			ipcidata);
 	/* clear by setting */
 	tx3927_pcicptr->istat |= PCI_ISTAT_IDICC;
@@ -323,11 +295,11 @@ void tx_iooutl(unsigned long data, unsigned int *addr)
 	__u32 ioaddr;
 
 	ioaddr = (unsigned long) addr;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcidata =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata =
 	    cpu_to_le32(data);
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
 	    (unsigned long) ioaddr;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
 	    (PCI_IPCIBE_ICMD_IOWRITE << PCI_IPCIBE_ICMD_SHIFT) |
 	    PCI_IPCIBE_IBE_LONG;
 	while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
diff --git a/arch/mips/pci/ops-tx4938.c b/arch/mips/pci/ops-tx4938.c
new file mode 100644
index 000000000000..4c0dcfce5297
--- /dev/null
+++ b/arch/mips/pci/ops-tx4938.c
@@ -0,0 +1,198 @@
+/*
+ * Define the pci_ops for the Toshiba rbtx4938
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/addrspace.h>
+#include <asm/tx4938/rbtx4938.h>
+
+/* initialize in setup */
+struct resource pci_io_resource = {
+	.name	= "pci IO space",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_IO
+};
+
+/* initialize in setup */
+struct resource pci_mem_resource = {
+	.name	= "pci memory space",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_MEM
+};
+
+struct resource tx4938_pcic1_pci_io_resource = {
+       	.name	= "PCI1 IO",
+       	.start	= 0,
+       	.end	= 0,
+       	.flags	= IORESOURCE_IO
+};
+struct resource tx4938_pcic1_pci_mem_resource = {
+       	.name	= "PCI1 mem",
+       	.start	= 0,
+       	.end	= 0,
+       	.flags	= IORESOURCE_MEM
+};
+
+static int mkaddr(int bus, int dev_fn, int where, int *flagsp)
+{
+	if (bus > 0) {
+		/* Type 1 configuration */
+		tx4938_pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) |
+		    ((dev_fn & 0xff) << 0x08) | (where & 0xfc) | 1;
+	} else {
+		if (dev_fn >= PCI_DEVFN(TX4938_PCIC_MAX_DEVNU, 0))
+			return -1;
+
+		/* Type 0 configuration */
+		tx4938_pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) |
+		    ((dev_fn & 0xff) << 0x08) | (where & 0xfc);
+	}
+	/* clear M_ABORT and Disable M_ABORT Int. */
+	tx4938_pcicptr->pcistatus =
+	    (tx4938_pcicptr->pcistatus & 0x0000ffff) |
+	    (PCI_STATUS_REC_MASTER_ABORT << 16);
+	tx4938_pcicptr->pcimask &= ~PCI_STATUS_REC_MASTER_ABORT;
+
+	return 0;
+}
+
+static int check_abort(int flags)
+{
+	int code = PCIBIOS_SUCCESSFUL;
+	/* wait write cycle completion before checking error status */
+	while (tx4938_pcicptr->pcicstatus & TX4938_PCIC_PCICSTATUS_IWB)
+				;
+	if (tx4938_pcicptr->pcistatus & (PCI_STATUS_REC_MASTER_ABORT << 16)) {
+		tx4938_pcicptr->pcistatus =
+		    (tx4938_pcicptr->
+		     pcistatus & 0x0000ffff) | (PCI_STATUS_REC_MASTER_ABORT
+						<< 16);
+		tx4938_pcicptr->pcimask |= PCI_STATUS_REC_MASTER_ABORT;
+		code = PCIBIOS_DEVICE_NOT_FOUND;
+	}
+	return code;
+}
+
+static int tx4938_pcibios_read_config(struct pci_bus *bus, unsigned int devfn,
+					int where, int size, u32 * val)
+{
+	int flags, retval, dev, busno, func;
+
+	dev = PCI_SLOT(devfn);
+	func = PCI_FUNC(devfn);
+
+	/* check if the bus is top-level */
+	if (bus->parent != NULL)
+		busno = bus->number;
+	else {
+		busno = 0;
+	}
+
+	if (mkaddr(busno, devfn, where, &flags))
+		return -1;
+
+	switch (size) {
+	case 1:
+		*val = *(volatile u8 *) ((ulong) & tx4938_pcicptr->g2pcfgdata |
+#ifdef __BIG_ENDIAN
+			      ((where & 3) ^ 3));
+#else
+			      (where & 3));
+#endif
+		break;
+	case 2:
+		*val = *(volatile u16 *) ((ulong) & tx4938_pcicptr->g2pcfgdata |
+#ifdef __BIG_ENDIAN
+				((where & 3) ^ 2));
+#else
+				(where & 3));
+#endif
+		break;
+	case 4:
+		*val = tx4938_pcicptr->g2pcfgdata;
+		break;
+	}
+
+	retval = check_abort(flags);
+	if (retval == PCIBIOS_DEVICE_NOT_FOUND)
+		*val = 0xffffffff;
+
+	return retval;
+}
+
+static int tx4938_pcibios_write_config(struct pci_bus *bus, unsigned int devfn, int where,
+						int size, u32 val)
+{
+	int flags, dev, busno, func;
+
+	busno = bus->number;
+	dev = PCI_SLOT(devfn);
+	func = PCI_FUNC(devfn);
+
+	/* check if the bus is top-level */
+	if (bus->parent != NULL) {
+		busno = bus->number;
+	} else {
+		busno = 0;
+	}
+
+	if (mkaddr(busno, devfn, where, &flags))
+		return -1;
+
+	switch (size) {
+	case 1:
+		*(volatile u8 *) ((ulong) & tx4938_pcicptr->g2pcfgdata |
+#ifdef __BIG_ENDIAN
+			  ((where & 3) ^ 3)) = val;
+#else
+			  (where & 3)) = val;
+#endif
+		break;
+	case 2:
+		*(volatile u16 *) ((ulong) & tx4938_pcicptr->g2pcfgdata |
+#ifdef __BIG_ENDIAN
+			((where & 0x3) ^ 0x2)) = val;
+#else
+			(where & 3)) = val;
+#endif
+		break;
+	case 4:
+		tx4938_pcicptr->g2pcfgdata = val;
+		break;
+	}
+
+	return check_abort(flags);
+}
+
+struct pci_ops tx4938_pci_ops = {
+	tx4938_pcibios_read_config,
+	tx4938_pcibios_write_config
+};
+
+struct pci_controller tx4938_pci_controller[] = {
+	/* h/w only supports devices 0x00 to 0x14 */
+	{
+		.pci_ops        = &tx4938_pci_ops,
+		.io_resource    = &pci_io_resource,
+		.mem_resource   = &pci_mem_resource,
+	},
+	/* h/w only supports devices 0x00 to 0x14 */
+	{
+		.pci_ops        = &tx4938_pci_ops,
+		.io_resource    = &tx4938_pcic1_pci_io_resource,
+		.mem_resource   = &tx4938_pcic1_pci_mem_resource,
+        }
+};
diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c
new file mode 100644
index 000000000000..f194b4e4f86a
--- /dev/null
+++ b/arch/mips/pci/pci-bcm1480.c
@@ -0,0 +1,265 @@
+/*
+ * Copyright (C) 2001,2002,2005 Broadcom Corporation
+ * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+/*
+ * BCM1x80/1x55-specific PCI support
+ *
+ * This module provides the glue between Linux's PCI subsystem
+ * and the hardware.  We basically provide glue for accessing
+ * configuration space, and set up the translation for I/O
+ * space accesses.
+ *
+ * To access configuration space, we use ioremap.  In the 32-bit
+ * kernel, this consumes either 4 or 8 page table pages, and 16MB of
+ * kernel mapped memory.  Hopefully neither of these should be a huge
+ * problem.
+ *
+ * XXX: AT THIS TIME, ONLY the NATIVE PCI-X INTERFACE IS SUPPORTED.
+ */
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_scd.h>
+#include <asm/sibyte/board.h>
+#include <asm/io.h>
+
+/*
+ * Macros for calculating offsets into config space given a device
+ * structure or dev/fun/reg
+ */
+#define CFGOFFSET(bus,devfn,where) (((bus)<<16)+((devfn)<<8)+(where))
+#define CFGADDR(bus,devfn,where)   CFGOFFSET((bus)->number,(devfn),where)
+
+static void *cfg_space;
+
+#define PCI_BUS_ENABLED	1
+#define PCI_DEVICE_MODE	2
+
+static int bcm1480_bus_status = 0;
+
+#define PCI_BRIDGE_DEVICE  0
+
+/*
+ * Read/write 32-bit values in config space.
+ */
+static inline u32 READCFG32(u32 addr)
+{
+	return *(u32 *)(cfg_space + (addr&~3));
+}
+
+static inline void WRITECFG32(u32 addr, u32 data)
+{
+	*(u32 *)(cfg_space + (addr & ~3)) = data;
+}
+
+int pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	return dev->irq;
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}
+
+/*
+ * Some checks before doing config cycles:
+ * In PCI Device Mode, hide everything on bus 0 except the LDT host
+ * bridge.  Otherwise, access is controlled by bridge MasterEn bits.
+ */
+static int bcm1480_pci_can_access(struct pci_bus *bus, int devfn)
+{
+	u32 devno;
+
+	if (!(bcm1480_bus_status & (PCI_BUS_ENABLED | PCI_DEVICE_MODE)))
+		return 0;
+
+	if (bus->number == 0) {
+		devno = PCI_SLOT(devfn);
+ 		if (bcm1480_bus_status & PCI_DEVICE_MODE)
+			return 0;
+		else
+			return 1;
+	} else
+		return 1;
+}
+
+/*
+ * Read/write access functions for various sizes of values
+ * in config space.  Return all 1's for disallowed accesses
+ * for a kludgy but adequate simulation of master aborts.
+ */
+
+static int bcm1480_pcibios_read(struct pci_bus *bus, unsigned int devfn,
+				int where, int size, u32 * val)
+{
+	u32 data = 0;
+
+	if ((size == 2) && (where & 1))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+	else if ((size == 4) && (where & 3))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	if (bcm1480_pci_can_access(bus, devfn))
+		data = READCFG32(CFGADDR(bus, devfn, where));
+	else
+		data = 0xFFFFFFFF;
+
+	if (size == 1)
+		*val = (data >> ((where & 3) << 3)) & 0xff;
+	else if (size == 2)
+		*val = (data >> ((where & 3) << 3)) & 0xffff;
+	else
+		*val = data;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm1480_pcibios_write(struct pci_bus *bus, unsigned int devfn,
+				int where, int size, u32 val)
+{
+	u32 cfgaddr = CFGADDR(bus, devfn, where);
+	u32 data = 0;
+
+	if ((size == 2) && (where & 1))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+	else if ((size == 4) && (where & 3))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	if (!bcm1480_pci_can_access(bus, devfn))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	data = READCFG32(cfgaddr);
+
+	if (size == 1)
+		data = (data & ~(0xff << ((where & 3) << 3))) |
+		    (val << ((where & 3) << 3));
+	else if (size == 2)
+		data = (data & ~(0xffff << ((where & 3) << 3))) |
+		    (val << ((where & 3) << 3));
+	else
+		data = val;
+
+	WRITECFG32(cfgaddr, data);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops bcm1480_pci_ops = {
+	bcm1480_pcibios_read,
+	bcm1480_pcibios_write,
+};
+
+static struct resource bcm1480_mem_resource = {
+	.name	= "BCM1480 PCI MEM",
+	.start	= 0x30000000UL,
+	.end	= 0x3fffffffUL,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct resource bcm1480_io_resource = {
+	.name	= "BCM1480 PCI I/O",
+	.start	= 0x2c000000UL,
+	.end	= 0x2dffffffUL,
+	.flags	= IORESOURCE_IO,
+};
+
+struct pci_controller bcm1480_controller = {
+	.pci_ops	= &bcm1480_pci_ops,
+	.mem_resource	= &bcm1480_mem_resource,
+	.io_resource	= &bcm1480_io_resource,
+};
+
+
+static int __init bcm1480_pcibios_init(void)
+{
+	uint32_t cmdreg;
+	uint64_t reg;
+	extern int pci_probe_only;
+
+	/* CFE will assign PCI resources */
+	pci_probe_only = 1;
+
+	/* Avoid ISA compat ranges.  */
+	PCIBIOS_MIN_IO = 0x00008000UL;
+	PCIBIOS_MIN_MEM = 0x01000000UL;
+
+	/* Set I/O resource limits. - unlimited for now to accomodate HT */
+	ioport_resource.end = 0xffffffffUL;
+	iomem_resource.end = 0xffffffffUL;
+
+	cfg_space = ioremap(A_BCM1480_PHYS_PCI_CFG_MATCH_BITS, 16*1024*1024);
+
+	/*
+	 * See if the PCI bus has been configured by the firmware.
+	 */
+	reg = *((volatile uint64_t *) IOADDR(A_SCD_SYSTEM_CFG));
+	if (!(reg & M_BCM1480_SYS_PCI_HOST)) {
+		bcm1480_bus_status |= PCI_DEVICE_MODE;
+	} else {
+		cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0),
+					     PCI_COMMAND));
+		if (!(cmdreg & PCI_COMMAND_MASTER)) {
+			printk
+			    ("PCI: Skipping PCI probe.  Bus is not initialized.\n");
+			iounmap(cfg_space);
+			return 1; /* XXX */
+		}
+		bcm1480_bus_status |= PCI_BUS_ENABLED;
+	}
+
+	/* turn on ExpMemEn */
+	cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40));
+	printk("PCIFeatureCtrl = %x\n", cmdreg);
+	WRITECFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40),
+			cmdreg | 0x10);
+	cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40));
+	printk("PCIFeatureCtrl = %x\n", cmdreg);
+
+	/*
+	 * Establish mappings in KSEG2 (kernel virtual) to PCI I/O
+	 * space.  Use "match bytes" policy to make everything look
+	 * little-endian.  So, you need to also set
+	 * CONFIG_SWAP_IO_SPACE, but this is the combination that
+	 * works correctly with most of Linux's drivers.
+	 * XXX ehs: Should this happen in PCI Device mode?
+	 */
+
+	set_io_port_base((unsigned long)
+		ioremap(A_BCM1480_PHYS_PCI_IO_MATCH_BYTES, 65536));
+	isa_slot_offset = (unsigned long)
+		ioremap(A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES, 1024*1024);
+
+	register_pci_controller(&bcm1480_controller);
+
+#ifdef CONFIG_VGA_CONSOLE
+	take_over_console(&vga_con,0,MAX_NR_CONSOLES-1,1);
+#endif
+	return 0;
+}
+
+arch_initcall(bcm1480_pcibios_init);
diff --git a/arch/mips/pci/pci-bcm1480ht.c b/arch/mips/pci/pci-bcm1480ht.c
new file mode 100644
index 000000000000..aca4a2e7a1c6
--- /dev/null
+++ b/arch/mips/pci/pci-bcm1480ht.c
@@ -0,0 +1,224 @@
+/*
+ * Copyright (C) 2001,2002,2005 Broadcom Corporation
+ * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+/*
+ * BCM1480/1455-specific HT support (looking like PCI)
+ *
+ * This module provides the glue between Linux's PCI subsystem
+ * and the hardware.  We basically provide glue for accessing
+ * configuration space, and set up the translation for I/O
+ * space accesses.
+ *
+ * To access configuration space, we use ioremap.  In the 32-bit
+ * kernel, this consumes either 4 or 8 page table pages, and 16MB of
+ * kernel mapped memory.  Hopefully neither of these should be a huge
+ * problem.
+ *
+ */
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_scd.h>
+#include <asm/sibyte/board.h>
+#include <asm/io.h>
+
+/*
+ * Macros for calculating offsets into config space given a device
+ * structure or dev/fun/reg
+ */
+#define CFGOFFSET(bus,devfn,where) (((bus)<<16)+((devfn)<<8)+(where))
+#define CFGADDR(bus,devfn,where)   CFGOFFSET((bus)->number,(devfn),where)
+
+static void *ht_cfg_space;
+
+#define PCI_BUS_ENABLED	1
+#define PCI_DEVICE_MODE	2
+
+static int bcm1480ht_bus_status = 0;
+
+#define PCI_BRIDGE_DEVICE  0
+#define HT_BRIDGE_DEVICE   1
+
+/*
+ * HT's level-sensitive interrupts require EOI, which is generated
+ * through a 4MB memory-mapped region
+ */
+unsigned long ht_eoi_space;
+
+/*
+ * Read/write 32-bit values in config space.
+ */
+static inline u32 READCFG32(u32 addr)
+{
+	return *(u32 *)(ht_cfg_space + (addr&~3));
+}
+
+static inline void WRITECFG32(u32 addr, u32 data)
+{
+	*(u32 *)(ht_cfg_space + (addr & ~3)) = data;
+}
+
+/*
+ * Some checks before doing config cycles:
+ * In PCI Device Mode, hide everything on bus 0 except the LDT host
+ * bridge.  Otherwise, access is controlled by bridge MasterEn bits.
+ */
+static int bcm1480ht_can_access(struct pci_bus *bus, int devfn)
+{
+	u32 devno;
+
+	if (!(bcm1480ht_bus_status & (PCI_BUS_ENABLED | PCI_DEVICE_MODE)))
+		return 0;
+
+	if (bus->number == 0) {
+		devno = PCI_SLOT(devfn);
+ 		if (bcm1480ht_bus_status & PCI_DEVICE_MODE)
+			return 0;
+	}
+	return 1;
+}
+
+/*
+ * Read/write access functions for various sizes of values
+ * in config space.  Return all 1's for disallowed accesses
+ * for a kludgy but adequate simulation of master aborts.
+ */
+
+static int bcm1480ht_pcibios_read(struct pci_bus *bus, unsigned int devfn,
+				  int where, int size, u32 * val)
+{
+	u32 data = 0;
+
+	if ((size == 2) && (where & 1))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+	else if ((size == 4) && (where & 3))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	if (bcm1480ht_can_access(bus, devfn))
+		data = READCFG32(CFGADDR(bus, devfn, where));
+	else
+		data = 0xFFFFFFFF;
+
+	if (size == 1)
+		*val = (data >> ((where & 3) << 3)) & 0xff;
+	else if (size == 2)
+		*val = (data >> ((where & 3) << 3)) & 0xffff;
+	else
+		*val = data;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm1480ht_pcibios_write(struct pci_bus *bus, unsigned int devfn,
+				   int where, int size, u32 val)
+{
+	u32 cfgaddr = CFGADDR(bus, devfn, where);
+	u32 data = 0;
+
+	if ((size == 2) && (where & 1))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+	else if ((size == 4) && (where & 3))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	if (!bcm1480ht_can_access(bus, devfn))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	data = READCFG32(cfgaddr);
+
+	if (size == 1)
+		data = (data & ~(0xff << ((where & 3) << 3))) |
+		    (val << ((where & 3) << 3));
+	else if (size == 2)
+		data = (data & ~(0xffff << ((where & 3) << 3))) |
+		    (val << ((where & 3) << 3));
+	else
+		data = val;
+
+	WRITECFG32(cfgaddr, data);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm1480ht_pcibios_get_busno(void)
+{
+	return 0;
+}
+
+struct pci_ops bcm1480ht_pci_ops = {
+	.read	= bcm1480ht_pcibios_read,
+	.write	= bcm1480ht_pcibios_write,
+};
+
+static struct resource bcm1480ht_mem_resource = {
+	.name	= "BCM1480 HT MEM",
+	.start	= 0x40000000UL,
+	.end	= 0x5fffffffUL,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct resource bcm1480ht_io_resource = {
+	.name	= "BCM1480 HT I/O",
+	.start	= 0x00000000UL,
+	.end	= 0x01ffffffUL,
+	.flags	= IORESOURCE_IO,
+};
+
+struct pci_controller bcm1480ht_controller = {
+	.pci_ops	= &bcm1480ht_pci_ops,
+	.mem_resource	= &bcm1480ht_mem_resource,
+	.io_resource	= &bcm1480ht_io_resource,
+	.index		= 1,
+	.get_busno	= bcm1480ht_pcibios_get_busno,
+};
+
+static int __init bcm1480ht_pcibios_init(void)
+{
+	uint32_t cmdreg;
+
+	ht_cfg_space = ioremap(A_BCM1480_PHYS_HT_CFG_MATCH_BITS, 16*1024*1024);
+
+	/*
+	 * See if the PCI bus has been configured by the firmware.
+	 */
+	cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0),
+				     PCI_COMMAND));
+	if (!(cmdreg & PCI_COMMAND_MASTER)) {
+		printk("HT: Skipping HT probe. Bus is not initialized.\n");
+		iounmap(ht_cfg_space);
+		return 1; /* XXX */
+	}
+	bcm1480ht_bus_status |= PCI_BUS_ENABLED;
+
+	ht_eoi_space = (unsigned long)
+		ioremap(A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES,
+			4 * 1024 * 1024);
+
+	register_pci_controller(&bcm1480ht_controller);
+
+	return 0;
+}
+
+arch_initcall(bcm1480ht_pcibios_init);
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index 068e0e508e15..efc96ce99eeb 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -485,5 +485,12 @@ static void __init pci_fixup_ioc3(struct pci_dev *d)
 	pci_disable_swapping(d);
 }
 
+int pcibus_to_node(struct pci_bus *bus)
+{
+	struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
+
+	return bc->nasid;
+}
+
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
 	pci_fixup_ioc3);
diff --git a/arch/mips/pci/pci-ip32.c b/arch/mips/pci/pci-ip32.c
index 000dc6af6cd3..180af89bcb1e 100644
--- a/arch/mips/pci/pci-ip32.c
+++ b/arch/mips/pci/pci-ip32.c
@@ -136,7 +136,9 @@ static int __init mace_init(void)
 	BUG_ON(request_irq(MACE_PCI_BRIDGE_IRQ, macepci_error, 0,
 			   "MACE PCI error", NULL));
 
-	ioport_resource.end = mace_pci_io_resource.end;
+	iomem_resource = mace_pci_mem_resource;
+	ioport_resource = mace_pci_io_resource;
+
 	register_pci_controller(&mace_pci_controller);
 
 	return 0;
diff --git a/arch/mips/pci/pci-jmr3927.c b/arch/mips/pci/pci-jmr3927.c
index 95a028769e56..f02ef6e36b02 100644
--- a/arch/mips/pci/pci-jmr3927.c
+++ b/arch/mips/pci/pci-jmr3927.c
@@ -54,5 +54,5 @@ struct pci_controller jmr3927_controller = {
 	.pci_ops	= &jmr3927_pci_ops,
 	.io_resource	= &pci_io_resource,
 	.mem_resource	= &pci_mem_resource,
-	.mem_offset	= JMR3927_PCIMEM;
+	.mem_offset	= JMR3927_PCIMEM
 };
diff --git a/arch/mips/pci/pci-lasat.c b/arch/mips/pci/pci-lasat.c
index ae3cc4b254b5..88fb191ad2eb 100644
--- a/arch/mips/pci/pci-lasat.c
+++ b/arch/mips/pci/pci-lasat.c
@@ -7,12 +7,8 @@
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/pci.h>
 #include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
 #include <asm/bootinfo.h>
 
 extern struct pci_ops nile4_pci_ops;
@@ -20,14 +16,14 @@ extern struct pci_ops gt64120_pci_ops;
 static struct resource lasat_pci_mem_resource = {
 	.name	= "LASAT PCI MEM",
 	.start	= 0x18000000,
-	.end	= 0x19FFFFFF,
+	.end	= 0x19ffffff,
 	.flags	= IORESOURCE_MEM,
 };
 
 static struct resource lasat_pci_io_resource = {
 	.name	= "LASAT PCI IO",
 	.start	= 0x1a000000,
-	.end	= 0x1bFFFFFF,
+	.end	= 0x1bffffff,
 	.flags	= IORESOURCE_IO,
 };
 
@@ -38,23 +34,25 @@ static struct pci_controller lasat_pci_controller = {
 
 static int __init lasat_pci_setup(void)
 {
- 	printk("PCI: starting\n");
+	printk("PCI: starting\n");
 
-        switch (mips_machtype) {
-            case MACH_LASAT_100:
+	switch (mips_machtype) {
+	case MACH_LASAT_100:
                 lasat_pci_controller.pci_ops = &gt64120_pci_ops;
                 break;
-            case MACH_LASAT_200:
+	case MACH_LASAT_200:
                 lasat_pci_controller.pci_ops = &nile4_pci_ops;
                 break;
-            default:
+	default:
                 panic("pcibios_init: mips_machtype incorrect");
         }
 
 	register_pci_controller(&lasat_pci_controller);
-        return 0;
+
+	return 0;
 }
-early_initcall(lasat_pci_setup);
+
+arch_initcall(lasat_pci_setup);
 
 #define LASATINT_ETH1   0
 #define LASATINT_ETH0   1
@@ -68,24 +66,22 @@ early_initcall(lasat_pci_setup);
 
 int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
-    switch (slot) {
-        case 1:
-            return LASATINT_PCIA;   /* Expansion Module 0 */
-        case 2:
-            return LASATINT_PCIB;   /* Expansion Module 1 */
-        case 3:
-            return LASATINT_PCIC;   /* Expansion Module 2 */
-        case 4:
-            return LASATINT_ETH1;   /* Ethernet 1 (LAN 2) */
-        case 5:
-            return LASATINT_ETH0;   /* Ethernet 0 (LAN 1) */
-        case 6:
-            return LASATINT_HDC;    /* IDE controller */
-        default:
-            return 0xff;            /* Illegal */
-    }
+	switch (slot) {
+	case 1:
+	case 2:
+	case 3:
+		return LASATINT_PCIA + (((slot-1) + (pin-1)) % 4);
+	case 4:
+		return LASATINT_ETH1;   /* Ethernet 1 (LAN 2) */
+	case 5:
+		return LASATINT_ETH0;   /* Ethernet 0 (LAN 1) */
+	case 6:
+		return LASATINT_HDC;    /* IDE controller */
+	default:
+		return 0xff;            /* Illegal */
+	}
 
-    return -1;
+	return -1;
 }
 
 /* Do platform specific device initialization at pci_enable_device() time */
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index a8d499b0a36f..21402ffd7c98 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -127,15 +127,20 @@ static int __init pcibios_init(void)
 		if (!hose->iommu)
 			PCI_DMA_BUS_IS_PHYS = 1;
 
+		if (hose->get_busno && pci_probe_only)
+			next_busno = (*hose->get_busno)();
+
 		bus = pci_scan_bus(next_busno, hose->pci_ops, hose);
 		hose->bus = bus;
 		hose->need_domain_info = need_domain_info;
-		next_busno = bus->subordinate + 1;
-		/* Don't allow 8-bit bus number overflow inside the hose -
-		   reserve some space for bridges. */
-		if (next_busno > 224) {
-			next_busno = 0;
-			need_domain_info = 1;
+		if (bus) {
+			next_busno = bus->subordinate + 1;
+			/* Don't allow 8-bit bus number overflow inside the hose -
+			   reserve some space for bridges. */
+			if (next_busno > 224) {
+				next_busno = 0;
+				need_domain_info = 1;
+			}
 		}
 		continue;
 
@@ -164,7 +169,7 @@ static int pcibios_enable_resources(struct pci_dev *dev, int mask)
 
 	pci_read_config_word(dev, PCI_COMMAND, &cmd);
 	old_cmd = cmd;
-	for(idx=0; idx<6; idx++) {
+	for (idx=0; idx < PCI_NUM_RESOURCES; idx++) {
 		/* Only set up the requested stuff */
 		if (!(mask & (1<<idx)))
 			continue;
diff --git a/arch/mips/philips/pnx8550/common/Kconfig b/arch/mips/philips/pnx8550/common/Kconfig
new file mode 100644
index 000000000000..072572d173cc
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/Kconfig
@@ -0,0 +1 @@
+# Place holder
diff --git a/arch/mips/philips/pnx8550/common/Makefile b/arch/mips/philips/pnx8550/common/Makefile
new file mode 100644
index 000000000000..6e38f3bc443c
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/Makefile
@@ -0,0 +1,27 @@
+#
+# Per Hallsmark, per.hallsmark@mvista.com
+#
+# ########################################################################
+#
+# This program is free software; you can distribute it and/or modify it
+# under the terms of the GNU General Public License (Version 2) as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+#
+# #######################################################################
+#
+# Makefile for the PNX8550 specific kernel interface routines
+# under Linux.
+#
+
+obj-y := setup.o prom.o mipsIRQ.o int.o reset.o time.o proc.o platform.o
+obj-$(CONFIG_PCI) += pci.o
+obj-$(CONFIG_KGDB) += gdb_hook.o
diff --git a/arch/mips/philips/pnx8550/common/gdb_hook.c b/arch/mips/philips/pnx8550/common/gdb_hook.c
new file mode 100644
index 000000000000..ad4624f6d9bc
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/gdb_hook.c
@@ -0,0 +1,109 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * This is the interface to the remote debugger stub.
+ *
+ */
+#include <linux/types.h>
+#include <linux/serial.h>
+#include <linux/serialP.h>
+#include <linux/serial_reg.h>
+#include <linux/serial_ip3106.h>
+
+#include <asm/serial.h>
+#include <asm/io.h>
+
+#include <uart.h>
+
+static struct serial_state rs_table[IP3106_NR_PORTS] = {
+};
+static struct async_struct kdb_port_info = {0};
+
+void rs_kgdb_hook(int tty_no)
+{
+	struct serial_state *ser = &rs_table[tty_no];
+
+	kdb_port_info.state = ser;
+	kdb_port_info.magic = SERIAL_MAGIC;
+	kdb_port_info.port  = tty_no;
+	kdb_port_info.flags = ser->flags;
+
+	/*
+	 * Clear all interrupts
+	 */
+	/* Clear all the transmitter FIFO counters (pointer and status) */
+	ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_TX_RST;
+	/* Clear all the receiver FIFO counters (pointer and status) */
+	ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_RX_RST;
+	/* Clear all interrupts */
+	ip3106_iclr(UART_BASE, tty_no) = IP3106_UART_INT_ALLRX |
+		IP3106_UART_INT_ALLTX;
+
+	/*
+	 * Now, initialize the UART
+	 */
+	ip3106_lcr(UART_BASE, tty_no) = IP3106_UART_LCR_8BIT;
+	ip3106_baud(UART_BASE, tty_no) = 5; // 38400 Baud
+}
+
+int putDebugChar(char c)
+{
+	/* Wait until FIFO not full */
+	while (((ip3106_fifo(UART_BASE, kdb_port_info.port) & IP3106_UART_FIFO_TXFIFO) >> 16) >= 16)
+		;
+	/* Send one char */
+	ip3106_fifo(UART_BASE, kdb_port_info.port) = c;
+
+	return 1;
+}
+
+char getDebugChar(void)
+{
+	char ch;
+
+	/* Wait until there is a char in the FIFO */
+	while (!((ip3106_fifo(UART_BASE, kdb_port_info.port) &
+					IP3106_UART_FIFO_RXFIFO) >> 8))
+		;
+	/* Read one char */
+	ch = ip3106_fifo(UART_BASE, kdb_port_info.port) &
+		IP3106_UART_FIFO_RBRTHR;
+	/* Advance the RX FIFO read pointer */
+	ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_NEXT;
+	return (ch);
+}
+
+void rs_disable_debug_interrupts(void)
+{
+	ip3106_ien(UART_BASE, kdb_port_info.port) = 0; /* Disable all interrupts */
+}
+
+void rs_enable_debug_interrupts(void)
+{
+	/* Clear all the transmitter FIFO counters (pointer and status) */
+	ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_TX_RST;
+	/* Clear all the receiver FIFO counters (pointer and status) */
+	ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_RST;
+	/* Clear all interrupts */
+	ip3106_iclr(UART_BASE, kdb_port_info.port) = IP3106_UART_INT_ALLRX |
+		IP3106_UART_INT_ALLTX;
+	ip3106_ien(UART_BASE, kdb_port_info.port)  = IP3106_UART_INT_ALLRX; /* Enable RX interrupts */
+}
diff --git a/arch/mips/philips/pnx8550/common/int.c b/arch/mips/philips/pnx8550/common/int.c
new file mode 100644
index 000000000000..546144988bf5
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/int.c
@@ -0,0 +1,293 @@
+/*
+ *
+ * Copyright (C) 2005 Embedded Alley Solutions, Inc
+ * Ported to 2.6.
+ *
+ * Per Hallsmark, per.hallsmark@mvista.com
+ * Copyright (C) 2000, 2001 MIPS Technologies, Inc.
+ * Copyright (C) 2001 Ralf Baechle
+ *
+ * Cleaned up and bug fixing: Pete Popov, ppopov@embeddedalley.com
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/random.h>
+#include <linux/module.h>
+
+#include <asm/io.h>
+#include <asm/gdb-stub.h>
+#include <int.h>
+#include <uart.h>
+
+extern asmlinkage void cp0_irqdispatch(void);
+
+static DEFINE_SPINLOCK(irq_lock);
+
+/* default prio for interrupts */
+/* first one is a no-no so therefore always prio 0 (disabled) */
+static char gic_prio[PNX8550_INT_GIC_TOTINT] = {
+	0, 1, 1, 1, 1, 15, 1, 1, 1, 1,	//   0 -  9
+	1, 1, 1, 1, 1, 1, 1, 1, 1, 1,	//  10 - 19
+	1, 1, 1, 1, 1, 1, 1, 1, 1, 1,	//  20 - 29
+	1, 1, 1, 1, 1, 1, 1, 1, 1, 1,	//  30 - 39
+	1, 1, 1, 1, 1, 1, 1, 1, 1, 1,	//  40 - 49
+	1, 1, 1, 1, 1, 1, 1, 1, 2, 1,	//  50 - 59
+	1, 1, 1, 1, 1, 1, 1, 1, 1, 1,	//  60 - 69
+	1			//  70
+};
+
+void hw0_irqdispatch(int irq, struct pt_regs *regs)
+{
+	/* find out which interrupt */
+	irq = PNX8550_GIC_VECTOR_0 >> 3;
+
+	if (irq == 0) {
+		printk("hw0_irqdispatch: irq 0, spurious interrupt?\n");
+		return;
+	}
+	do_IRQ(PNX8550_INT_GIC_MIN + irq, regs);
+}
+
+
+void timer_irqdispatch(int irq, struct pt_regs *regs)
+{
+	irq = (0x01c0 & read_c0_config7()) >> 6;
+
+	if (irq == 0) {
+		printk("timer_irqdispatch: irq 0, spurious interrupt?\n");
+		return;
+	}
+
+	if (irq & 0x1) {
+		do_IRQ(PNX8550_INT_TIMER1, regs);
+	}
+	if (irq & 0x2) {
+		do_IRQ(PNX8550_INT_TIMER2, regs);
+	}
+	if (irq & 0x4) {
+		do_IRQ(PNX8550_INT_TIMER3, regs);
+	}
+}
+
+static inline void modify_cp0_intmask(unsigned clr_mask, unsigned set_mask)
+{
+	unsigned long status = read_c0_status();
+
+	status &= ~((clr_mask & 0xFF) << 8);
+	status |= (set_mask & 0xFF) << 8;
+
+	write_c0_status(status);
+}
+
+static inline void mask_gic_int(unsigned int irq_nr)
+{
+	/* interrupt disabled, bit 26(WE_ENABLE)=1 and bit 16(enable)=0 */
+	PNX8550_GIC_REQ(irq_nr) = 1<<28; /* set priority to 0 */
+}
+
+static inline void unmask_gic_int(unsigned int irq_nr)
+{
+	/* set prio mask to lower four bits and enable interrupt */
+	PNX8550_GIC_REQ(irq_nr) = (1<<26 | 1<<16) | (1<<28) | gic_prio[irq_nr];
+}
+
+static inline void mask_irq(unsigned int irq_nr)
+{
+	if ((PNX8550_INT_CP0_MIN <= irq_nr) && (irq_nr <= PNX8550_INT_CP0_MAX)) {
+		modify_cp0_intmask(1 << irq_nr, 0);
+	} else if ((PNX8550_INT_GIC_MIN <= irq_nr) &&
+		(irq_nr <= PNX8550_INT_GIC_MAX)) {
+		mask_gic_int(irq_nr - PNX8550_INT_GIC_MIN);
+	} else if ((PNX8550_INT_TIMER_MIN <= irq_nr) &&
+		(irq_nr <= PNX8550_INT_TIMER_MAX)) {
+		modify_cp0_intmask(1 << 7, 0);
+	} else {
+		printk("mask_irq: irq %d doesn't exist!\n", irq_nr);
+	}
+}
+
+static inline void unmask_irq(unsigned int irq_nr)
+{
+	if ((PNX8550_INT_CP0_MIN <= irq_nr) && (irq_nr <= PNX8550_INT_CP0_MAX)) {
+		modify_cp0_intmask(0, 1 << irq_nr);
+	} else if ((PNX8550_INT_GIC_MIN <= irq_nr) &&
+		(irq_nr <= PNX8550_INT_GIC_MAX)) {
+		unmask_gic_int(irq_nr - PNX8550_INT_GIC_MIN);
+	} else if ((PNX8550_INT_TIMER_MIN <= irq_nr) &&
+		(irq_nr <= PNX8550_INT_TIMER_MAX)) {
+		modify_cp0_intmask(0, 1 << 7);
+	} else {
+		printk("mask_irq: irq %d doesn't exist!\n", irq_nr);
+	}
+}
+
+#define pnx8550_disable pnx8550_ack
+static void pnx8550_ack(unsigned int irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&irq_lock, flags);
+	mask_irq(irq);
+	spin_unlock_irqrestore(&irq_lock, flags);
+}
+
+#define pnx8550_enable pnx8550_unmask
+static void pnx8550_unmask(unsigned int irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&irq_lock, flags);
+	unmask_irq(irq);
+	spin_unlock_irqrestore(&irq_lock, flags);
+}
+
+static unsigned int startup_irq(unsigned int irq_nr)
+{
+	pnx8550_unmask(irq_nr);
+	return 0;
+}
+
+static void shutdown_irq(unsigned int irq_nr)
+{
+	pnx8550_ack(irq_nr);
+	return;
+}
+
+int pnx8550_set_gic_priority(int irq, int priority)
+{
+	int gic_irq = irq-PNX8550_INT_GIC_MIN;
+	int prev_priority = PNX8550_GIC_REQ(gic_irq) & 0xf;
+
+        gic_prio[gic_irq] = priority;
+	PNX8550_GIC_REQ(gic_irq) |= (0x10000000 | gic_prio[gic_irq]);
+
+	return prev_priority;
+}
+
+static inline void mask_and_ack_level_irq(unsigned int irq)
+{
+	pnx8550_disable(irq);
+	return;
+}
+
+static void end_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
+		pnx8550_enable(irq);
+	}
+}
+
+static struct hw_interrupt_type level_irq_type = {
+	.typename =	"PNX Level IRQ",
+	.startup =	startup_irq,
+	.shutdown =	shutdown_irq,
+	.enable =	pnx8550_enable,
+	.disable =	pnx8550_disable,
+	.ack =		mask_and_ack_level_irq,
+	.end =		end_irq,
+};
+
+static struct irqaction gic_action = {
+	.handler =	no_action,
+	.flags =	SA_INTERRUPT,
+	.name =		"GIC",
+};
+
+static struct irqaction timer_action = {
+	.handler =	no_action,
+	.flags =	SA_INTERRUPT,
+	.name =		"Timer",
+};
+
+void __init arch_init_irq(void)
+{
+	int i;
+	int configPR;
+
+	/* init of cp0 interrupts */
+	set_except_vector(0, cp0_irqdispatch);
+
+	for (i = 0; i < PNX8550_INT_CP0_TOTINT; i++) {
+		irq_desc[i].handler = &level_irq_type;
+		pnx8550_ack(i);	/* mask the irq just in case  */
+	}
+
+	/* init of GIC/IPC interrupts */
+	/* should be done before cp0 since cp0 init enables the GIC int */
+	for (i = PNX8550_INT_GIC_MIN; i <= PNX8550_INT_GIC_MAX; i++) {
+		int gic_int_line = i - PNX8550_INT_GIC_MIN;
+		if (gic_int_line == 0 )
+			continue;	// don't fiddle with int 0
+		/*
+		 * enable change of TARGET, ENABLE and ACTIVE_LOW bits
+		 * set TARGET        0 to route through hw0 interrupt
+		 * set ACTIVE_LOW    0 active high  (correct?)
+		 *
+		 * We really should setup an interrupt description table
+		 * to do this nicely.
+		 * Note, PCI INTA is active low on the bus, but inverted
+		 * in the GIC, so to us it's active high.
+		 */
+#ifdef CONFIG_PNX8550_V2PCI
+		if (gic_int_line == (PNX8550_INT_GPIO0 - PNX8550_INT_GIC_MIN)) {
+			/* PCI INT through gpio 8, which is setup in
+			 * pnx8550_setup.c and routed to GPIO
+ 			 * Interrupt Level 0 (GPIO Connection 58).
+			 * Set it active low. */
+
+			PNX8550_GIC_REQ(gic_int_line) = 0x1E020000;
+		} else
+#endif
+		{
+			PNX8550_GIC_REQ(i - PNX8550_INT_GIC_MIN) = 0x1E000000;
+		}
+
+		/* mask/priority is still 0 so we will not get any
+		 * interrupts until it is unmasked */
+
+		irq_desc[i].handler = &level_irq_type;
+	}
+
+	/* Priority level 0 */
+	PNX8550_GIC_PRIMASK_0 = PNX8550_GIC_PRIMASK_1 = 0;
+
+	/* Set int vector table address */
+	PNX8550_GIC_VECTOR_0 = PNX8550_GIC_VECTOR_1 = 0;
+
+	irq_desc[MIPS_CPU_GIC_IRQ].handler = &level_irq_type;
+	setup_irq(MIPS_CPU_GIC_IRQ, &gic_action);
+
+	/* init of Timer interrupts */
+	for (i = PNX8550_INT_TIMER_MIN; i <= PNX8550_INT_TIMER_MAX; i++) {
+		irq_desc[i].handler = &level_irq_type;
+	}
+
+	/* Stop Timer 1-3 */
+	configPR = read_c0_config7();
+	configPR |= 0x00000038;
+	write_c0_config7(configPR);
+
+	irq_desc[MIPS_CPU_TIMER_IRQ].handler = &level_irq_type;
+	setup_irq(MIPS_CPU_TIMER_IRQ, &timer_action);
+}
+
+EXPORT_SYMBOL(pnx8550_set_gic_priority);
diff --git a/arch/mips/philips/pnx8550/common/mipsIRQ.S b/arch/mips/philips/pnx8550/common/mipsIRQ.S
new file mode 100644
index 000000000000..338bffda3fab
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/mipsIRQ.S
@@ -0,0 +1,76 @@
+/*
+ * Copyright (c) 2002 Philips, Inc. All rights.
+ * Copyright (c) 2002 Red Hat, Inc. All rights.
+ *
+ * This software may be freely redistributed under the terms of the
+ * GNU General Public License.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Based upon arch/mips/galileo-boards/ev64240/int-handler.S
+ *
+ */
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+/*
+ * cp0_irqdispatch
+ *
+ *    Code to handle in-core interrupt exception.
+ */
+
+		.align	5
+		.set	reorder
+		.set	noat
+		NESTED(cp0_irqdispatch, PT_SIZE, sp)
+		SAVE_ALL
+		CLI
+		.set	at
+		mfc0	t0,CP0_CAUSE
+		mfc0	t2,CP0_STATUS
+
+		and	t0,t2
+
+		andi	t1,t0,STATUSF_IP2 /* int0 hardware line */
+		bnez	t1,ll_hw0_irq
+		nop
+
+		andi	t1,t0,STATUSF_IP7 /* int5 hardware line */
+		bnez	t1,ll_timer_irq
+		nop
+
+		/* wrong alarm or masked ... */
+
+		j	spurious_interrupt
+		nop
+		END(cp0_irqdispatch)
+
+		.align	5
+		.set	reorder
+ll_hw0_irq:
+		li	a0,2
+		move	a1,sp
+		jal	hw0_irqdispatch
+		nop
+		j	ret_from_irq
+		nop
+
+		.align	5
+		.set	reorder
+ll_timer_irq:
+		mfc0	t3,CP0_CONFIG,7
+		andi	t4,t3,0x01c0
+		beqz	t4,ll_timer_out
+		nop
+		li	a0,7
+		move	a1,sp
+		jal	timer_irqdispatch
+		nop
+
+ll_timer_out:	j	ret_from_irq
+		nop
diff --git a/arch/mips/philips/pnx8550/common/pci.c b/arch/mips/philips/pnx8550/common/pci.c
new file mode 100644
index 000000000000..baa6905f649f
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/pci.c
@@ -0,0 +1,133 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *
+ * Author: source@mvista.com
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <pci.h>
+#include <glb.h>
+#include <nand.h>
+
+static struct resource pci_io_resource = {
+	"pci IO space",
+	(u32)(PNX8550_PCIIO + 0x1000),	/* reserve regacy I/O space */
+	(u32)(PNX8550_PCIIO + PNX8550_PCIIO_SIZE),
+	IORESOURCE_IO
+};
+
+static struct resource pci_mem_resource = {
+	"pci memory space",
+	(u32)(PNX8550_PCIMEM),
+	(u32)(PNX8550_PCIMEM + PNX8550_PCIMEM_SIZE - 1),
+	IORESOURCE_MEM
+};
+
+extern struct pci_ops pnx8550_pci_ops;
+
+static struct pci_controller pnx8550_controller = {
+	.pci_ops	= &pnx8550_pci_ops,
+	.io_resource	= &pci_io_resource,
+	.mem_resource	= &pci_mem_resource,
+};
+
+/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
+static inline unsigned long get_system_mem_size(void)
+{
+	/* Read IP2031_RANK0_ADDR_LO */
+	unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
+	/* Read IP2031_RANK1_ADDR_HI */
+	unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
+
+	return dram_r1_hi - dram_r0_lo + 1;
+}
+
+static int __init pnx8550_pci_setup(void)
+{
+	int pci_mem_code;
+	int mem_size = get_system_mem_size() >> 20;
+
+	/* Clear the Global 2 Register, PCI Inta Output Enable Registers
+	   Bit 1:Enable DAC Powerdown
+	  -> 0:DACs are enabled and are working normally
+	     1:DACs are powerdown
+	   Bit 0:Enable of PCI inta output
+	  -> 0 = Disable PCI inta output
+	     1 = Enable PCI inta output
+	*/
+	PNX8550_GLB2_ENAB_INTA_O = 0;
+
+	/* Calc the PCI mem size code */
+	if (mem_size >= 128)
+		pci_mem_code = SIZE_128M;
+	else if (mem_size >= 64)
+		pci_mem_code = SIZE_64M;
+	else if (mem_size >= 32)
+		pci_mem_code = SIZE_32M;
+	else
+		pci_mem_code = SIZE_16M;
+
+	/* Set PCI_XIO registers */
+	outl(pci_mem_resource.start, PCI_BASE | PCI_BASE1_LO);
+	outl(pci_mem_resource.end + 1, PCI_BASE | PCI_BASE1_HI);
+	outl(pci_io_resource.start, PCI_BASE | PCI_BASE2_LO);
+	outl(pci_io_resource.end, PCI_BASE | PCI_BASE2_HI);
+
+	/* Send memory transaction via PCI_BASE2 */
+	outl(0x00000001, PCI_BASE | PCI_IO);
+
+	/* Unlock the setup register */
+	outl(0xca, PCI_BASE | PCI_UNLOCKREG);
+
+	/*
+	 * BAR0 of PNX8550 (pci base 10) must be zero in order for ide
+	 * to work, and in order for bus_to_baddr to work without any
+	 * hacks.
+	 */
+	outl(0x00000000, PCI_BASE | PCI_BASE10);
+
+	/*
+	 *These two bars are set by default or the boot code.
+	 * However, it's safer to set them here so we're not boot
+	 * code dependent.
+	 */
+	outl(0x1be00000, PCI_BASE | PCI_BASE14);  /* PNX MMIO */
+	outl(PNX8550_NAND_BASE_ADDR, PCI_BASE | PCI_BASE18);  /* XIO      */
+
+	outl(PCI_EN_TA |
+	     PCI_EN_PCI2MMI |
+	     PCI_EN_XIO |
+	     PCI_SETUP_BASE18_SIZE(SIZE_32M) |
+	     PCI_SETUP_BASE18_EN |
+	     PCI_SETUP_BASE14_EN |
+	     PCI_SETUP_BASE10_PREF |
+	     PCI_SETUP_BASE10_SIZE(pci_mem_code) |
+	     PCI_SETUP_CFGMANAGE_EN |
+	     PCI_SETUP_PCIARB_EN,
+	     PCI_BASE |
+	     PCI_SETUP);	/* PCI_SETUP */
+	outl(0x00000000, PCI_BASE | PCI_CTRL);	/* PCI_CONTROL */
+
+	register_pci_controller(&pnx8550_controller);
+
+	return 0;
+}
+
+arch_initcall(pnx8550_pci_setup);
diff --git a/arch/mips/philips/pnx8550/common/platform.c b/arch/mips/philips/pnx8550/common/platform.c
new file mode 100644
index 000000000000..8aa9bd65b45e
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/platform.c
@@ -0,0 +1,135 @@
+/*
+ * Platform device support for Philips PNX8550 SoCs
+ *
+ * Copyright 2005, Embedded Alley Solutions, Inc
+ *
+ * Based on arch/mips/au1000/common/platform.c
+ * Platform device support for Au1x00 SoCs.
+ *
+ * Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/resource.h>
+#include <linux/serial.h>
+#include <linux/serial_ip3106.h>
+
+#include <int.h>
+#include <usb.h>
+#include <uart.h>
+
+extern struct uart_ops ip3106_pops;
+
+static struct resource pnx8550_usb_ohci_resources[] = {
+	[0] = {
+		.start		= PNX8550_USB_OHCI_OP_BASE,
+		.end		= PNX8550_USB_OHCI_OP_BASE +
+				  PNX8550_USB_OHCI_OP_LEN,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= PNX8550_INT_USB,
+		.end		= PNX8550_INT_USB,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource pnx8550_uart_resources[] = {
+	[0] = {
+		.start		= PNX8550_UART_PORT0,
+		.end		= PNX8550_UART_PORT0 + 0xfff,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= PNX8550_UART_INT(0),
+		.end		= PNX8550_UART_INT(0),
+		.flags		= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start		= PNX8550_UART_PORT1,
+		.end		= PNX8550_UART_PORT1 + 0xfff,
+		.flags		= IORESOURCE_MEM,
+	},
+	[3] = {
+		.start		= PNX8550_UART_INT(1),
+		.end		= PNX8550_UART_INT(1),
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+struct ip3106_port ip3106_ports[] = {
+	[0] = {
+		.port   = {
+			.type		= PORT_IP3106,
+			.iotype		= SERIAL_IO_MEM,
+			.membase	= (void __iomem *)PNX8550_UART_PORT0,
+			.mapbase	= PNX8550_UART_PORT0,
+			.irq		= PNX8550_UART_INT(0),
+			.uartclk	= 3692300,
+			.fifosize	= 16,
+			.ops		= &ip3106_pops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 0,
+		},
+	},
+	[1] = {
+		.port   = {
+			.type		= PORT_IP3106,
+			.iotype		= SERIAL_IO_MEM,
+			.membase	= (void __iomem *)PNX8550_UART_PORT1,
+			.mapbase	= PNX8550_UART_PORT1,
+			.irq		= PNX8550_UART_INT(1),
+			.uartclk	= 3692300,
+			.fifosize	= 16,
+			.ops		= &ip3106_pops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 1,
+		},
+	},
+};
+
+/* The dmamask must be set for OHCI to work */
+static u64 ohci_dmamask = ~(u32)0;
+
+static u64 uart_dmamask = ~(u32)0;
+
+static struct platform_device pnx8550_usb_ohci_device = {
+	.name		= "pnx8550-ohci",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &ohci_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(pnx8550_usb_ohci_resources),
+	.resource	= pnx8550_usb_ohci_resources,
+};
+
+static struct platform_device pnx8550_uart_device = {
+	.name		= "ip3106-uart",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &uart_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data = ip3106_ports,
+	},
+	.num_resources	= ARRAY_SIZE(pnx8550_uart_resources),
+	.resource	= pnx8550_uart_resources,
+};
+
+static struct platform_device *pnx8550_platform_devices[] __initdata = {
+	&pnx8550_usb_ohci_device,
+	&pnx8550_uart_device,
+};
+
+int pnx8550_platform_init(void)
+{
+	return platform_add_devices(pnx8550_platform_devices,
+			            ARRAY_SIZE(pnx8550_platform_devices));
+}
+
+arch_initcall(pnx8550_platform_init);
diff --git a/arch/mips/philips/pnx8550/common/proc.c b/arch/mips/philips/pnx8550/common/proc.c
new file mode 100644
index 000000000000..72a016767e09
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/proc.c
@@ -0,0 +1,113 @@
+/*
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/init.h>
+#include <linux/proc_fs.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/random.h>
+
+#include <asm/io.h>
+#include <asm/gdb-stub.h>
+#include <int.h>
+#include <uart.h>
+
+
+static int pnx8550_timers_read (char* page, char** start, off_t offset, int count, int* eof, void* data)
+{
+        int len = 0;
+	int configPR = read_c0_config7();
+
+        if (offset==0) {
+		len += sprintf(&page[len],"Timer:       count,  compare, tc, status\n");
+                len += sprintf(&page[len],"    1: %11i, %8i,  %1i, %s\n",
+			       read_c0_count(), read_c0_compare(),
+			      (configPR>>6)&0x1, ((configPR>>3)&0x1)? "off":"on");
+                len += sprintf(&page[len],"    2: %11i, %8i,  %1i, %s\n",
+			       read_c0_count2(), read_c0_compare2(),
+			      (configPR>>7)&0x1, ((configPR>>4)&0x1)? "off":"on");
+                len += sprintf(&page[len],"    3: %11i, %8i,  %1i, %s\n",
+			       read_c0_count3(), read_c0_compare3(),
+			      (configPR>>8)&0x1, ((configPR>>5)&0x1)? "off":"on");
+        }
+
+        return len;
+}
+
+static int pnx8550_registers_read (char* page, char** start, off_t offset, int count, int* eof, void* data)
+{
+        int len = 0;
+
+        if (offset==0) {
+                len += sprintf(&page[len],"config1:   %#10.8x\n",read_c0_config1());
+                len += sprintf(&page[len],"config2:   %#10.8x\n",read_c0_config2());
+                len += sprintf(&page[len],"config3:   %#10.8x\n",read_c0_config3());
+                len += sprintf(&page[len],"configPR:  %#10.8x\n",read_c0_config7());
+                len += sprintf(&page[len],"status:    %#10.8x\n",read_c0_status());
+                len += sprintf(&page[len],"cause:     %#10.8x\n",read_c0_cause());
+                len += sprintf(&page[len],"count:     %#10.8x\n",read_c0_count());
+                len += sprintf(&page[len],"count_2:   %#10.8x\n",read_c0_count2());
+                len += sprintf(&page[len],"count_3:   %#10.8x\n",read_c0_count3());
+                len += sprintf(&page[len],"compare:   %#10.8x\n",read_c0_compare());
+                len += sprintf(&page[len],"compare_2: %#10.8x\n",read_c0_compare2());
+                len += sprintf(&page[len],"compare_3: %#10.8x\n",read_c0_compare3());
+        }
+
+        return len;
+}
+
+static struct proc_dir_entry* pnx8550_dir        = NULL;
+static struct proc_dir_entry* pnx8550_timers     = NULL;
+static struct proc_dir_entry* pnx8550_registers  = NULL;
+
+static int pnx8550_proc_init( void )
+{
+
+	// Create /proc/pnx8550
+        pnx8550_dir = create_proc_entry("pnx8550", S_IFDIR|S_IRUGO, NULL);
+        if (pnx8550_dir){
+                pnx8550_dir->nlink = 1;
+        }
+        else {
+                printk(KERN_ERR "Can't create pnx8550 proc dir\n");
+                return -1;
+        }
+
+	// Create /proc/pnx8550/timers
+        pnx8550_timers = create_proc_entry("timers", S_IFREG|S_IRUGO, pnx8550_dir );
+        if (pnx8550_timers){
+                pnx8550_timers->nlink = 1;
+                pnx8550_timers->read_proc = pnx8550_timers_read;
+        }
+        else {
+                printk(KERN_ERR "Can't create pnx8550 timers proc file\n");
+        }
+
+	// Create /proc/pnx8550/registers
+        pnx8550_registers = create_proc_entry("registers", S_IFREG|S_IRUGO, pnx8550_dir );
+        if (pnx8550_registers){
+                pnx8550_registers->nlink = 1;
+                pnx8550_registers->read_proc = pnx8550_registers_read;
+        }
+        else {
+                printk(KERN_ERR "Can't create pnx8550 registers proc file\n");
+        }
+
+	return 0;
+}
+
+__initcall(pnx8550_proc_init);
diff --git a/arch/mips/philips/pnx8550/common/prom.c b/arch/mips/philips/pnx8550/common/prom.c
new file mode 100644
index 000000000000..70aac9759412
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/prom.c
@@ -0,0 +1,138 @@
+/*
+ *
+ * Per Hallsmark, per.hallsmark@mvista.com
+ *
+ * Based on jmr3927/common/prom.c
+ *
+ * 2004 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/serial_ip3106.h>
+
+#include <asm/bootinfo.h>
+#include <uart.h>
+
+/* #define DEBUG_CMDLINE */
+
+extern int prom_argc;
+extern char **prom_argv, **prom_envp;
+
+typedef struct
+{
+    char *name;
+/*    char *val; */
+}t_env_var;
+
+
+char * prom_getcmdline(void)
+{
+	return &(arcs_cmdline[0]);
+}
+
+void  prom_init_cmdline(void)
+{
+	char *cp;
+	int actr;
+
+	actr = 1; /* Always ignore argv[0] */
+
+	cp = &(arcs_cmdline[0]);
+	while(actr < prom_argc) {
+	        strcpy(cp, prom_argv[actr]);
+		cp += strlen(prom_argv[actr]);
+		*cp++ = ' ';
+		actr++;
+	}
+	if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
+		--cp;
+	*cp = '\0';
+}
+
+char *prom_getenv(char *envname)
+{
+	/*
+	 * Return a pointer to the given environment variable.
+	 * Environment variables are stored in the form of "memsize=64".
+	 */
+
+	t_env_var *env = (t_env_var *)prom_envp;
+	int i;
+
+	i = strlen(envname);
+
+	while(env->name) {
+		if(strncmp(envname, env->name, i) == 0) {
+			return(env->name + strlen(envname) + 1);
+		}
+		env++;
+	}
+	return(NULL);
+}
+
+inline unsigned char str2hexnum(unsigned char c)
+{
+	if(c >= '0' && c <= '9')
+		return c - '0';
+	if(c >= 'a' && c <= 'f')
+		return c - 'a' + 10;
+	if(c >= 'A' && c <= 'F')
+		return c - 'A' + 10;
+	return 0; /* foo */
+}
+
+inline void str2eaddr(unsigned char *ea, unsigned char *str)
+{
+	int i;
+
+	for(i = 0; i < 6; i++) {
+		unsigned char num;
+
+		if((*str == '.') || (*str == ':'))
+			str++;
+		num = str2hexnum(*str++) << 4;
+		num |= (str2hexnum(*str++));
+		ea[i] = num;
+	}
+}
+
+int get_ethernet_addr(char *ethernet_addr)
+{
+        char *ethaddr_str;
+
+        ethaddr_str = prom_getenv("ethaddr");
+	if (!ethaddr_str) {
+	        printk("ethaddr not set in boot prom\n");
+		return -1;
+	}
+	str2eaddr(ethernet_addr, ethaddr_str);
+	return 0;
+}
+
+unsigned long __init prom_free_prom_memory(void)
+{
+	return 0;
+}
+
+extern int pnx8550_console_port;
+
+/* used by prom_printf */
+void prom_putchar(char c)
+{
+	if (pnx8550_console_port != -1) {
+		/* Wait until FIFO not full */
+		while( ((ip3106_fifo(UART_BASE, pnx8550_console_port) & IP3106_UART_FIFO_TXFIFO) >> 16) >= 16)
+			;
+		/* Send one char */
+		ip3106_fifo(UART_BASE, pnx8550_console_port) = c;
+	}
+}
+
+EXPORT_SYMBOL(prom_getcmdline);
+EXPORT_SYMBOL(get_ethernet_addr);
+EXPORT_SYMBOL(str2eaddr);
diff --git a/arch/mips/philips/pnx8550/common/reset.c b/arch/mips/philips/pnx8550/common/reset.c
new file mode 100644
index 000000000000..7b2cbc5b2c7c
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/reset.c
@@ -0,0 +1,49 @@
+/*.
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * Reset the PNX8550 board.
+ *
+ */
+#include <linux/slab.h>
+#include <asm/reboot.h>
+#include <glb.h>
+
+void pnx8550_machine_restart(char *command)
+{
+	char head[] = "************* Machine restart *************";
+	char foot[] = "*******************************************";
+
+	printk("\n\n");
+	printk("%s\n", head);
+	if (command != NULL)
+		printk("* %s\n", command);
+	printk("%s\n", foot);
+
+	PNX8550_RST_CTL = PNX8550_RST_DO_SW_RST;
+}
+
+void pnx8550_machine_halt(void)
+{
+	printk("*** Machine halt. (Not implemented) ***\n");
+}
+
+void pnx8550_machine_power_off(void)
+{
+	printk("*** Machine power off.  (Not implemented) ***\n");
+}
diff --git a/arch/mips/philips/pnx8550/common/setup.c b/arch/mips/philips/pnx8550/common/setup.c
new file mode 100644
index 000000000000..ee6bf72094f6
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/setup.c
@@ -0,0 +1,149 @@
+/*
+ *
+ * 2.6 port, Embedded Alley Solutions, Inc
+ *
+ *  Based on Per Hallsmark, per.hallsmark@mvista.com
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/serial_ip3106.h>
+
+#include <asm/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/reboot.h>
+#include <asm/pgtable.h>
+#include <asm/time.h>
+
+#include <glb.h>
+#include <int.h>
+#include <pci.h>
+#include <uart.h>
+#include <nand.h>
+
+extern void prom_printf(char *fmt, ...);
+
+extern void __init board_setup(void);
+extern void pnx8550_machine_restart(char *);
+extern void pnx8550_machine_halt(void);
+extern void pnx8550_machine_power_off(void);
+extern struct resource ioport_resource;
+extern struct resource iomem_resource;
+extern void (*board_time_init)(void);
+extern void pnx8550_time_init(void);
+extern void (*board_timer_setup)(struct irqaction *irq);
+extern void pnx8550_timer_setup(struct irqaction *irq);
+extern void rs_kgdb_hook(int tty_no);
+extern void prom_printf(char *fmt, ...);
+extern char *prom_getcmdline(void);
+
+struct resource standard_io_resources[] = {
+	{"dma1", 0x00, 0x1f, IORESOURCE_BUSY},
+	{"timer", 0x40, 0x5f, IORESOURCE_BUSY},
+	{"dma page reg", 0x80, 0x8f, IORESOURCE_BUSY},
+	{"dma2", 0xc0, 0xdf, IORESOURCE_BUSY},
+};
+
+#define STANDARD_IO_RESOURCES (sizeof(standard_io_resources)/sizeof(struct resource))
+
+extern struct resource pci_io_resource;
+extern struct resource pci_mem_resource;
+
+/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
+unsigned long get_system_mem_size(void)
+{
+	/* Read IP2031_RANK0_ADDR_LO */
+	unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
+	/* Read IP2031_RANK1_ADDR_HI */
+	unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
+
+	return dram_r1_hi - dram_r0_lo + 1;
+}
+
+int pnx8550_console_port = -1;
+
+void __init plat_setup(void)
+{
+	int i;
+	char* argptr;
+
+	board_setup();  /* board specific setup */
+
+        _machine_restart = pnx8550_machine_restart;
+        _machine_halt = pnx8550_machine_halt;
+        _machine_power_off = pnx8550_machine_power_off;
+
+	board_time_init = pnx8550_time_init;
+	board_timer_setup = pnx8550_timer_setup;
+
+	/* Clear the Global 2 Register, PCI Inta Output Enable Registers
+	   Bit 1:Enable DAC Powerdown
+	  -> 0:DACs are enabled and are working normally
+	     1:DACs are powerdown
+	   Bit 0:Enable of PCI inta output
+	  -> 0 = Disable PCI inta output
+	     1 = Enable PCI inta output
+	*/
+	PNX8550_GLB2_ENAB_INTA_O = 0;
+
+	/* IO/MEM resources. */
+	set_io_port_base(KSEG1);
+	ioport_resource.start = 0;
+	ioport_resource.end = ~0;
+	iomem_resource.start = 0;
+	iomem_resource.end = ~0;
+
+	/* Request I/O space for devices on this board */
+	for (i = 0; i < STANDARD_IO_RESOURCES; i++)
+		request_resource(&ioport_resource, standard_io_resources + i);
+
+	/* Place the Mode Control bit for GPIO pin 16 in primary function */
+	/* Pin 16 is used by UART1, UA1_TX                                */
+	outl((PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_16_BIT) |
+			(PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_17_BIT),
+			PNX8550_GPIO_MC1);
+
+	argptr = prom_getcmdline();
+	if ((argptr = strstr(argptr, "console=ttyS")) != NULL) {
+		argptr += strlen("console=ttyS");
+		pnx8550_console_port = *argptr == '0' ? 0 : 1;
+
+		/* We must initialize the UART (console) before prom_printf */
+		/* Set LCR to 8-bit and BAUD to 38400 (no 5)                */
+		ip3106_lcr(UART_BASE, pnx8550_console_port) =
+			IP3106_UART_LCR_8BIT;
+		ip3106_baud(UART_BASE, pnx8550_console_port) = 5;
+	}
+
+#ifdef CONFIG_KGDB
+	argptr = prom_getcmdline();
+	if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) {
+		int line;
+		argptr += strlen("kgdb=ttyS");
+		line = *argptr == '0' ? 0 : 1;
+		rs_kgdb_hook(line);
+		prom_printf("KGDB: Using ttyS%i for session, "
+				"please connect your debugger\n", line ? 1 : 0);
+	}
+#endif
+	return;
+}
diff --git a/arch/mips/philips/pnx8550/common/time.c b/arch/mips/philips/pnx8550/common/time.c
new file mode 100644
index 000000000000..70664ea96b92
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/time.c
@@ -0,0 +1,105 @@
+/*
+ * Copyright 2001, 2002, 2003 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * Common time service routines for MIPS machines. See
+ * Documents/MIPS/README.txt.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/param.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+#include <linux/smp.h>
+#include <linux/kernel_stat.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+
+#include <asm/bootinfo.h>
+#include <asm/cpu.h>
+#include <asm/time.h>
+#include <asm/hardirq.h>
+#include <asm/div64.h>
+#include <asm/debug.h>
+
+#include <int.h>
+#include <cm.h>
+
+extern unsigned int mips_hpt_frequency;
+
+/*
+ * pnx8550_time_init() - it does the following things:
+ *
+ * 1) board_time_init() -
+ * 	a) (optional) set up RTC routines,
+ *      b) (optional) calibrate and set the mips_hpt_frequency
+ *	    (only needed if you intended to use fixed_rate_gettimeoffset
+ *	     or use cpu counter as timer interrupt source)
+ */
+
+void pnx8550_time_init(void)
+{
+	unsigned int             n;
+	unsigned int             m;
+	unsigned int             p;
+	unsigned int             pow2p;
+
+        /* PLL0 sets MIPS clock (PLL1 <=> TM1, PLL6 <=> TM2, PLL5 <=> mem) */
+        /* (but only if CLK_MIPS_CTL select value [bits 3:1] is 1:  FIXME) */
+
+        n = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_N_MASK) >> 16;
+        m = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_M_MASK) >> 8;
+        p = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_P_MASK) >> 2;
+	pow2p = (1 << p);
+
+	db_assert(m != 0 && pow2p != 0);
+
+        /*
+	 * Compute the frequency as in the PNX8550 User Manual 1.0, p.186
+	 * (a.k.a. 8-10).  Divide by HZ for a timer offset that results in
+	 * HZ timer interrupts per second.
+	 */
+	mips_hpt_frequency = 27UL * ((1000000UL * n)/(m * pow2p));
+}
+
+/*
+ * pnx8550_timer_setup() - it does the following things:
+ *
+ * 5) board_timer_setup() -
+ *	a) (optional) over-write any choices made above by time_init().
+ *	b) machine specific code should setup the timer irqaction.
+ *	c) enable the timer interrupt
+ */
+
+void __init pnx8550_timer_setup(struct irqaction *irq)
+{
+	int configPR;
+
+	setup_irq(PNX8550_INT_TIMER1, irq);
+
+	/* Start timer1 */
+	configPR = read_c0_config7();
+	configPR &= ~0x00000008;
+	write_c0_config7(configPR);
+
+	/* Timer 2 stop */
+	configPR = read_c0_config7();
+	configPR |= 0x00000010;
+	write_c0_config7(configPR);
+
+	write_c0_count2(0);
+	write_c0_compare2(0xffffffff);
+
+	/* Timer 3 stop */
+	configPR = read_c0_config7();
+	configPR |= 0x00000020;
+	write_c0_config7(configPR);
+}
diff --git a/arch/mips/philips/pnx8550/jbs/Makefile b/arch/mips/philips/pnx8550/jbs/Makefile
new file mode 100644
index 000000000000..e8228dbca8f6
--- /dev/null
+++ b/arch/mips/philips/pnx8550/jbs/Makefile
@@ -0,0 +1,4 @@
+
+# Makefile for the Philips JBS Board.
+
+lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/philips/pnx8550/jbs/board_setup.c b/arch/mips/philips/pnx8550/jbs/board_setup.c
new file mode 100644
index 000000000000..f92826e0096d
--- /dev/null
+++ b/arch/mips/philips/pnx8550/jbs/board_setup.c
@@ -0,0 +1,65 @@
+/*
+ *  JBS Specific board startup routines.
+ *
+ *  Copyright 2005, Embedded Alley Solutions, Inc
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/mc146818rtc.h>
+#include <linux/delay.h>
+
+#include <asm/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/reboot.h>
+#include <asm/pgtable.h>
+
+#include <glb.h>
+
+/* CP0 hazard avoidance. */
+#define BARRIER __asm__ __volatile__(".set noreorder\n\t" \
+				     "nop; nop; nop; nop; nop; nop;\n\t" \
+				     ".set reorder\n\t")
+
+void __init board_setup(void)
+{
+	unsigned long config0, configpr;
+
+	config0 = read_c0_config();
+
+	/* clear all three cache coherency fields */
+	config0 &= ~(0x7 | (7<<25) | (7<<28));
+	config0 |= (CONF_CM_DEFAULT | (CONF_CM_DEFAULT<<25) |
+			(CONF_CM_DEFAULT<<28));
+	write_c0_config(config0);
+	BARRIER;
+
+	configpr = read_c0_config7();
+	configpr |= (1<<19); /* enable tlb */
+	write_c0_config7(configpr);
+	BARRIER;
+}
diff --git a/arch/mips/philips/pnx8550/jbs/init.c b/arch/mips/philips/pnx8550/jbs/init.c
new file mode 100644
index 000000000000..85f449174bc3
--- /dev/null
+++ b/arch/mips/philips/pnx8550/jbs/init.c
@@ -0,0 +1,57 @@
+/*
+ *
+ *  Copyright 2005 Embedded Alley Solutions, Inc
+ *  source@embeddedalley.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+
+int prom_argc;
+char **prom_argv, **prom_envp;
+extern void  __init prom_init_cmdline(void);
+extern char *prom_getenv(char *envname);
+
+const char *get_system_type(void)
+{
+	return "Philips PNX8550/JBS";
+}
+
+void __init prom_init(void)
+{
+
+	unsigned long memsize;
+
+	mips_machgroup = MACH_GROUP_PHILIPS;
+	mips_machtype = MACH_PHILIPS_JBS;
+
+	//memsize = 0x02800000; /* Trimedia uses memory above */
+	memsize = 0x08000000; /* Trimedia uses memory above */
+	add_memory_region(0, memsize, BOOT_MEM_RAM);
+}
diff --git a/arch/mips/philips/pnx8550/jbs/irqmap.c b/arch/mips/philips/pnx8550/jbs/irqmap.c
new file mode 100644
index 000000000000..f78e0423dc98
--- /dev/null
+++ b/arch/mips/philips/pnx8550/jbs/irqmap.c
@@ -0,0 +1,36 @@
+/*
+ *  Philips JBS board irqmap.
+ *
+ *  Copyright 2005 Embedded Alley Solutions, Inc
+ *  source@embeddealley.com
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
+ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
+ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <int.h>
+
+char irq_tab_jbs[][5] __initdata = {
+ [8] =	{ -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
+ [9] =	{ -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
+ [17] =	{ -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
+};
+
diff --git a/arch/mips/pmc-sierra/Kconfig b/arch/mips/pmc-sierra/Kconfig
new file mode 100644
index 000000000000..24d514c9dff9
--- /dev/null
+++ b/arch/mips/pmc-sierra/Kconfig
@@ -0,0 +1,3 @@
+config HYPERTRANSPORT
+	bool "Hypertransport Support for PMC-Sierra Yosemite"
+	depends on PMC_YOSEMITE
diff --git a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h
index c19f01a32045..a31288335fba 100644
--- a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h
+++ b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h
@@ -34,7 +34,6 @@
 #include <linux/pci.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
-#include <linux/version.h>
 #include <asm/pci.h>
 #include <asm/io.h>
 #include <linux/init.h>
diff --git a/arch/mips/pmc-sierra/yosemite/ht-irq.c b/arch/mips/pmc-sierra/yosemite/ht-irq.c
index d22c9ffe4914..5aec4057314e 100644
--- a/arch/mips/pmc-sierra/yosemite/ht-irq.c
+++ b/arch/mips/pmc-sierra/yosemite/ht-irq.c
@@ -26,7 +26,6 @@
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/init.h>
 #include <asm/pci.h>
 
diff --git a/arch/mips/pmc-sierra/yosemite/ht.c b/arch/mips/pmc-sierra/yosemite/ht.c
index dad228d3a220..54b65a80abf5 100644
--- a/arch/mips/pmc-sierra/yosemite/ht.c
+++ b/arch/mips/pmc-sierra/yosemite/ht.c
@@ -28,7 +28,6 @@
 #include <linux/pci.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
-#include <linux/version.h>
 #include <asm/pci.h>
 #include <asm/io.h>
 
diff --git a/arch/mips/pmc-sierra/yosemite/prom.c b/arch/mips/pmc-sierra/yosemite/prom.c
index 1fb3e697948d..555bfacf7647 100644
--- a/arch/mips/pmc-sierra/yosemite/prom.c
+++ b/arch/mips/pmc-sierra/yosemite/prom.c
@@ -132,8 +132,9 @@ void __init prom_init(void)
 	prom_grab_secondary();
 }
 
-void __init prom_free_prom_memory(void)
+unsigned long __init prom_free_prom_memory(void)
 {
+	return 0;
 }
 
 void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
diff --git a/arch/mips/pmc-sierra/yosemite/setup.c b/arch/mips/pmc-sierra/yosemite/setup.c
index 7225bbf20ce4..059755b5ed57 100644
--- a/arch/mips/pmc-sierra/yosemite/setup.c
+++ b/arch/mips/pmc-sierra/yosemite/setup.c
@@ -73,7 +73,9 @@ void __init bus_error_init(void)
 unsigned long m48t37y_get_time(void)
 {
 	unsigned int year, month, day, hour, min, sec;
+	unsigned long flags;
 
+	spin_lock_irqsave(&rtc_lock, flags);
 	/* Stop the update to the time */
 	m48t37_base->control = 0x40;
 
@@ -88,6 +90,7 @@ unsigned long m48t37y_get_time(void)
 
 	/* Start the update to the time again */
 	m48t37_base->control = 0x00;
+	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	return mktime(year, month, day, hour, min, sec);
 }
@@ -95,11 +98,13 @@ unsigned long m48t37y_get_time(void)
 int m48t37y_set_time(unsigned long sec)
 {
 	struct rtc_time tm;
+	unsigned long flags;
 
 	/* convert to a more useful format -- note months count from 0 */
 	to_tm(sec, &tm);
 	tm.tm_mon += 1;
 
+	spin_lock_irqsave(&rtc_lock, flags);
 	/* enable writing */
 	m48t37_base->control = 0x80;
 
@@ -123,6 +128,7 @@ int m48t37y_set_time(unsigned long sec)
 
 	/* disable writing */
 	m48t37_base->control = 0x00;
+	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	return 0;
 }
@@ -212,7 +218,7 @@ static void __init py_late_time_init(void)
 	py_rtc_setup();
 }
 
-static int __init pmc_yosemite_setup(void)
+void __init plat_setup(void)
 {
 	board_time_init = yosemite_time_init;
 	late_time_init = py_late_time_init;
@@ -228,8 +234,4 @@ static int __init pmc_yosemite_setup(void)
 	OCD_WRITE(RM9000x2_OCD_HTBAR0, HYPERTRANSPORT_BAR0_ADDR);
 	OCD_WRITE(RM9000x2_OCD_HTMASK0, HYPERTRANSPORT_SIZE0);
 #endif
-
-	return 0;
 }
-
-early_initcall(pmc_yosemite_setup);
diff --git a/arch/mips/pmc-sierra/yosemite/smp.c b/arch/mips/pmc-sierra/yosemite/smp.c
index 1d3b0734c78c..0527170d6adb 100644
--- a/arch/mips/pmc-sierra/yosemite/smp.c
+++ b/arch/mips/pmc-sierra/yosemite/smp.c
@@ -9,7 +9,7 @@ extern void (*mips_hpt_init)(unsigned int);
 
 #define LAUNCHSTACK_SIZE 256
 
-static spinlock_t launch_lock __initdata;
+static __initdata DEFINE_SPINLOCK(launch_lock);
 
 static unsigned long secondary_sp __initdata;
 static unsigned long secondary_gp __initdata;
diff --git a/arch/mips/qemu/q-firmware.c b/arch/mips/qemu/q-firmware.c
index 5980f02b2df9..fb2a8673a6bf 100644
--- a/arch/mips/qemu/q-firmware.c
+++ b/arch/mips/qemu/q-firmware.c
@@ -1,7 +1,18 @@
 #include <linux/init.h>
+#include <linux/string.h>
+#include <asm/addrspace.h>
 #include <asm/bootinfo.h>
 
 void __init prom_init(void)
 {
-	add_memory_region(0x0<<20, 0x10<<20, BOOT_MEM_RAM);
+	int *cmdline;
+
+	cmdline = (int *) (CKSEG0 + (0x10 << 20) - 260);
+	if (*cmdline == 0x12345678) {
+		if (*(char *)(cmdline + 1))
+			strcpy (arcs_cmdline, (char *)(cmdline + 1));
+		add_memory_region(0x0<<20, cmdline[-1], BOOT_MEM_RAM);
+	} else {
+		add_memory_region(0x0<<20, 0x10<<20, BOOT_MEM_RAM);
+	}
 }
diff --git a/arch/mips/qemu/q-setup.c b/arch/mips/qemu/q-setup.c
index 1a80eee8cd35..022eb1af6db1 100644
--- a/arch/mips/qemu/q-setup.c
+++ b/arch/mips/qemu/q-setup.c
@@ -4,6 +4,11 @@
 
 #define QEMU_PORT_BASE 0xb4000000
 
+const char *get_system_type(void)
+{
+	return "Qemu";
+}
+
 static void __init qemu_timer_setup(struct irqaction *irq)
 {
 	/* set the clock to 100 Hz */
diff --git a/arch/mips/sgi-ip22/ip22-eisa.c b/arch/mips/sgi-ip22/ip22-eisa.c
index fa0e719c5bd1..b19820110aa3 100644
--- a/arch/mips/sgi-ip22/ip22-eisa.c
+++ b/arch/mips/sgi-ip22/ip22-eisa.c
@@ -29,6 +29,7 @@
 #include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
+#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mipsregs.h>
 #include <asm/addrspace.h>
@@ -37,42 +38,29 @@
 #include <asm/sgi/mc.h>
 #include <asm/sgi/ip22.h>
 
-#define EISA_MAX_SLOTS		  4
+/* I2 has four EISA slots. */
+#define IP22_EISA_MAX_SLOTS	  4
 #define EISA_MAX_IRQ             16
 
-#define EISA_TO_PHYS(x)  (0x00080000 | (x))
-#define EISA_TO_KSEG1(x) ((void *) KSEG1ADDR(EISA_TO_PHYS((x))))
-
-#define EIU_MODE_REG     0x0009ffc0
-#define EIU_STAT_REG     0x0009ffc4
-#define EIU_PREMPT_REG   0x0009ffc8
-#define EIU_QUIET_REG    0x0009ffcc
-#define EIU_INTRPT_ACK   0x00090004
-
-#define EISA_DMA1_STATUS            8
-#define EISA_INT1_CTRL           0x20
-#define EISA_INT1_MASK           0x21
-#define EISA_INT2_CTRL           0xA0
-#define EISA_INT2_MASK           0xA1
-#define EISA_DMA2_STATUS         0xD0
-#define EISA_DMA2_WRITE_SINGLE   0xD4
-#define EISA_EXT_NMI_RESET_CTRL 0x461
-#define EISA_INT1_EDGE_LEVEL    0x4D0
-#define EISA_INT2_EDGE_LEVEL    0x4D1
-#define EISA_VENDOR_ID_OFFSET   0xC80
-
-#define EIU_WRITE_32(x,y) { *((u32 *) KSEG1ADDR(x)) = (u32) (y); mb(); }
-#define EIU_READ_8(x) *((u8 *) KSEG1ADDR(x))
-#define EISA_WRITE_8(x,y) { *((u8 *) EISA_TO_KSEG1(x)) = (u8) (y); mb(); }
-#define EISA_READ_8(x) *((u8 *) EISA_TO_KSEG1(x))
-
-static char *decode_eisa_sig(u8 * sig)
+#define EIU_MODE_REG     0x0001ffc0
+#define EIU_STAT_REG     0x0001ffc4
+#define EIU_PREMPT_REG   0x0001ffc8
+#define EIU_QUIET_REG    0x0001ffcc
+#define EIU_INTRPT_ACK   0x00010004
+
+static char __init *decode_eisa_sig(unsigned long addr)
 {
-	static char sig_str[8];
-	u16 rev;
+        static char sig_str[EISA_SIG_LEN];
+	u8 sig[4];
+        u16 rev;
+	int i;
+
+	for (i = 0; i < 4; i++) {
+		sig[i] = inb (addr + i);
 
-	if (sig[0] & 0x80)
-		return NULL;
+		if (!i && (sig[0] & 0x80))
+			return NULL;
+	}
 
 	sig_str[0] = ((sig[0] >> 2) & 0x1f) + ('A' - 1);
 	sig_str[1] = (((sig[0] & 3) << 3) | (sig[1] >> 5)) + ('A' - 1);
@@ -83,23 +71,26 @@ static char *decode_eisa_sig(u8 * sig)
 	return sig_str;
 }
 
-static void ip22_eisa_intr(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t ip22_eisa_intr(int irq, void *dev_id, struct pt_regs *regs)
 {
 	u8 eisa_irq;
 	u8 dma1, dma2;
 
-	eisa_irq = EIU_READ_8(EIU_INTRPT_ACK);
-	dma1 = EISA_READ_8(EISA_DMA1_STATUS);
-	dma2 = EISA_READ_8(EISA_DMA2_STATUS);
-
-	if (eisa_irq >= EISA_MAX_IRQ) {
-		/* Oops, Bad Stuff Happened... */
-		printk(KERN_ERR "eisa_irq %d out of bound\n", eisa_irq);
+	eisa_irq = inb(EIU_INTRPT_ACK);
+	dma1 = inb(EISA_DMA1_STATUS);
+	dma2 = inb(EISA_DMA2_STATUS);
 
-		EISA_WRITE_8(EISA_INT2_CTRL, 0x20);
-		EISA_WRITE_8(EISA_INT1_CTRL, 0x20);
-	} else
+	if (eisa_irq < EISA_MAX_IRQ) {
 		do_IRQ(eisa_irq, regs);
+		return IRQ_HANDLED;
+	}
+
+	/* Oops, Bad Stuff Happened... */
+	printk(KERN_ERR "eisa_irq %d out of bound\n", eisa_irq);
+
+	outb(0x20, EISA_INT2_CTRL);
+	outb(0x20, EISA_INT1_CTRL);
+	return IRQ_NONE;
 }
 
 static void enable_eisa1_irq(unsigned int irq)
@@ -109,9 +100,9 @@ static void enable_eisa1_irq(unsigned int irq)
 
 	local_irq_save(flags);
 
-	mask = EISA_READ_8(EISA_INT1_MASK);
+	mask = inb(EISA_INT1_MASK);
 	mask &= ~((u8) (1 << irq));
-	EISA_WRITE_8(EISA_INT1_MASK, mask);
+	outb(mask, EISA_INT1_MASK);
 
 	local_irq_restore(flags);
 }
@@ -122,9 +113,9 @@ static unsigned int startup_eisa1_irq(unsigned int irq)
 
 	/* Only use edge interrupts for EISA */
 
-	edge = EISA_READ_8(EISA_INT1_EDGE_LEVEL);
+	edge = inb(EISA_INT1_EDGE_LEVEL);
 	edge &= ~((u8) (1 << irq));
-	EISA_WRITE_8(EISA_INT1_EDGE_LEVEL, edge);
+	outb(edge, EISA_INT1_EDGE_LEVEL);
 
 	enable_eisa1_irq(irq);
 	return 0;
@@ -134,9 +125,9 @@ static void disable_eisa1_irq(unsigned int irq)
 {
 	u8 mask;
 
-	mask = EISA_READ_8(EISA_INT1_MASK);
+	mask = inb(EISA_INT1_MASK);
 	mask |= ((u8) (1 << irq));
-	EISA_WRITE_8(EISA_INT1_MASK, mask);
+	outb(mask, EISA_INT1_MASK);
 }
 
 #define shutdown_eisa1_irq	disable_eisa1_irq
@@ -145,7 +136,7 @@ static void mask_and_ack_eisa1_irq(unsigned int irq)
 {
 	disable_eisa1_irq(irq);
 
-	EISA_WRITE_8(EISA_INT1_CTRL, 0x20);
+	outb(0x20, EISA_INT1_CTRL);
 }
 
 static void end_eisa1_irq(unsigned int irq)
@@ -171,9 +162,9 @@ static void enable_eisa2_irq(unsigned int irq)
 
 	local_irq_save(flags);
 
-	mask = EISA_READ_8(EISA_INT2_MASK);
+	mask = inb(EISA_INT2_MASK);
 	mask &= ~((u8) (1 << (irq - 8)));
-	EISA_WRITE_8(EISA_INT2_MASK, mask);
+	outb(mask, EISA_INT2_MASK);
 
 	local_irq_restore(flags);
 }
@@ -184,9 +175,9 @@ static unsigned int startup_eisa2_irq(unsigned int irq)
 
 	/* Only use edge interrupts for EISA */
 
-	edge = EISA_READ_8(EISA_INT2_EDGE_LEVEL);
+	edge = inb(EISA_INT2_EDGE_LEVEL);
 	edge &= ~((u8) (1 << (irq - 8)));
-	EISA_WRITE_8(EISA_INT2_EDGE_LEVEL, edge);
+	outb(edge, EISA_INT2_EDGE_LEVEL);
 
 	enable_eisa2_irq(irq);
 	return 0;
@@ -196,9 +187,9 @@ static void disable_eisa2_irq(unsigned int irq)
 {
 	u8 mask;
 
-	mask = EISA_READ_8(EISA_INT2_MASK);
+	mask = inb(EISA_INT2_MASK);
 	mask |= ((u8) (1 << (irq - 8)));
-	EISA_WRITE_8(EISA_INT2_MASK, mask);
+	outb(mask, EISA_INT2_MASK);
 }
 
 #define shutdown_eisa2_irq	disable_eisa2_irq
@@ -207,8 +198,7 @@ static void mask_and_ack_eisa2_irq(unsigned int irq)
 {
 	disable_eisa2_irq(irq);
 
-	EISA_WRITE_8(EISA_INT2_CTRL, 0x20);
-	EISA_WRITE_8(EISA_INT1_CTRL, 0x20);
+	outb(0x20, EISA_INT2_CTRL);
 }
 
 static void end_eisa2_irq(unsigned int irq)
@@ -241,7 +231,6 @@ int __init ip22_eisa_init(void)
 {
 	int i, c;
 	char *str;
-	u8 *slot_addr;
 
 	if (!(sgimc->systemid & SGIMC_SYSID_EPRESENT)) {
 		printk(KERN_INFO "EISA: bus not present.\n");
@@ -249,11 +238,8 @@ int __init ip22_eisa_init(void)
 	}
 
 	printk(KERN_INFO "EISA: Probing bus...\n");
-	for (c = 0, i = 1; i <= EISA_MAX_SLOTS; i++) {
-		slot_addr =
-		    (u8 *) EISA_TO_KSEG1((0x1000 * i) +
-					 EISA_VENDOR_ID_OFFSET);
-		if ((str = decode_eisa_sig(slot_addr))) {
+	for (c = 0, i = 1; i <= IP22_EISA_MAX_SLOTS; i++) {
+		if ((str = decode_eisa_sig(0x1000 * i + EISA_VENDOR_ID_OFFSET))) {
 			printk(KERN_INFO "EISA: slot %d : %s detected.\n",
 			       i, str);
 			c++;
@@ -268,25 +254,25 @@ int __init ip22_eisa_init(void)
 	   Please wave your favorite dead chicken over the busses */
 
 	/* First say hello to the EIU */
-	EIU_WRITE_32(EIU_PREMPT_REG, 0x0000FFFF);
-	EIU_WRITE_32(EIU_QUIET_REG, 1);
-	EIU_WRITE_32(EIU_MODE_REG, 0x40f3c07F);
+	outl(0x0000FFFF, EIU_PREMPT_REG);
+	outl(1, EIU_QUIET_REG);
+	outl(0x40f3c07F, EIU_MODE_REG);
 
 	/* Now be nice to the EISA chipset */
-	EISA_WRITE_8(EISA_EXT_NMI_RESET_CTRL, 1);
-	for (i = 0; i < 10000; i++);	/* Wait long enough for the dust to settle */
-	EISA_WRITE_8(EISA_EXT_NMI_RESET_CTRL, 0);
-	EISA_WRITE_8(EISA_INT1_CTRL, 0x11);
-	EISA_WRITE_8(EISA_INT2_CTRL, 0x11);
-	EISA_WRITE_8(EISA_INT1_MASK, 0);
-	EISA_WRITE_8(EISA_INT2_MASK, 8);
-	EISA_WRITE_8(EISA_INT1_MASK, 4);
-	EISA_WRITE_8(EISA_INT2_MASK, 2);
-	EISA_WRITE_8(EISA_INT1_MASK, 1);
-	EISA_WRITE_8(EISA_INT2_MASK, 1);
-	EISA_WRITE_8(EISA_INT1_MASK, 0xfb);
-	EISA_WRITE_8(EISA_INT2_MASK, 0xff);
-	EISA_WRITE_8(EISA_DMA2_WRITE_SINGLE, 0);
+	outb(1, EISA_EXT_NMI_RESET_CTRL);
+	udelay(50);	/* Wait long enough for the dust to settle */
+	outb(0, EISA_EXT_NMI_RESET_CTRL);
+	outb(0x11, EISA_INT1_CTRL);
+	outb(0x11, EISA_INT2_CTRL);
+	outb(0, EISA_INT1_MASK);
+	outb(8, EISA_INT2_MASK);
+	outb(4, EISA_INT1_MASK);
+	outb(2, EISA_INT2_MASK);
+	outb(1, EISA_INT1_MASK);
+	outb(1, EISA_INT2_MASK);
+	outb(0xfb, EISA_INT1_MASK);
+	outb(0xff, EISA_INT2_MASK);
+	outb(0, EISA_DMA2_WRITE_SINGLE);
 
 	for (i = SGINT_EISA; i < (SGINT_EISA + EISA_MAX_IRQ); i++) {
 		irq_desc[i].status = IRQ_DISABLED;
diff --git a/arch/mips/sgi-ip22/ip22-setup.c b/arch/mips/sgi-ip22/ip22-setup.c
index 0e96a5d67993..5e59b4c8876b 100644
--- a/arch/mips/sgi-ip22/ip22-setup.c
+++ b/arch/mips/sgi-ip22/ip22-setup.c
@@ -53,7 +53,7 @@ EXPORT_SYMBOL(ip22_do_break);
 extern void ip22_be_init(void) __init;
 extern void ip22_time_init(void) __init;
 
-static int __init ip22_setup(void)
+void __init plat_setup(void)
 {
 	char *ctype;
 
@@ -137,8 +137,4 @@ static int __init ip22_setup(void)
 		}
 	}
 #endif
-
-	return 0;
 }
-
-early_initcall(ip22_setup);
diff --git a/arch/mips/sgi-ip22/ip22-time.c b/arch/mips/sgi-ip22/ip22-time.c
index df9b5694328a..b7300cc5c5ad 100644
--- a/arch/mips/sgi-ip22/ip22-time.c
+++ b/arch/mips/sgi-ip22/ip22-time.c
@@ -35,7 +35,9 @@ static unsigned long indy_rtc_get_time(void)
 {
 	unsigned int yrs, mon, day, hrs, min, sec;
 	unsigned int save_control;
+	unsigned long flags;
 
+	spin_lock_irqsave(&rtc_lock, flags);
 	save_control = hpc3c0->rtcregs[RTC_CMD] & 0xff;
 	hpc3c0->rtcregs[RTC_CMD] = save_control | RTC_TE;
 
@@ -47,6 +49,7 @@ static unsigned long indy_rtc_get_time(void)
 	yrs = BCD2BIN(hpc3c0->rtcregs[RTC_YEAR] & 0xff);
 
 	hpc3c0->rtcregs[RTC_CMD] = save_control;
+	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	if (yrs < 45)
 		yrs += 30;
@@ -60,6 +63,7 @@ static int indy_rtc_set_time(unsigned long tim)
 {
 	struct rtc_time tm;
 	unsigned int save_control;
+	unsigned long flags;
 
 	to_tm(tim, &tm);
 
@@ -68,6 +72,7 @@ static int indy_rtc_set_time(unsigned long tim)
 	if (tm.tm_year >= 100)
 		tm.tm_year -= 100;
 
+	spin_lock_irqsave(&rtc_lock, flags);
 	save_control = hpc3c0->rtcregs[RTC_CMD] & 0xff;
 	hpc3c0->rtcregs[RTC_CMD] = save_control | RTC_TE;
 
@@ -80,6 +85,7 @@ static int indy_rtc_set_time(unsigned long tim)
 	hpc3c0->rtcregs[RTC_HUNDREDTH_SECOND] = 0;
 
 	hpc3c0->rtcregs[RTC_CMD] = save_control;
+	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	return 0;
 }
diff --git a/arch/mips/sgi-ip27/Kconfig b/arch/mips/sgi-ip27/Kconfig
new file mode 100644
index 000000000000..7b0bc4437243
--- /dev/null
+++ b/arch/mips/sgi-ip27/Kconfig
@@ -0,0 +1,54 @@
+#config SGI_SN0_XXL
+#	bool "IP27 XXL"
+#	depends on SGI_IP27
+#	  This options adds support for userspace processes upto 16TB size.
+#	  Normally the limit is just .5TB.
+
+config SGI_SN0_N_MODE
+	bool "IP27 N-Mode"
+	depends on SGI_IP27
+	help
+	  The nodes of Origin 200, Origin 2000 and Onyx 2 systems can be
+	  configured in either N-Modes which allows for more nodes or M-Mode
+	  which allows for more memory.  Your system is most probably
+	  running in M-Mode, so you should say N here.
+
+config ARCH_DISCONTIGMEM_ENABLE
+	bool
+	default y if SGI_IP27
+	help
+	  Say Y to upport efficient handling of discontiguous physical memory,
+	  for architectures which are either NUMA (Non-Uniform Memory Access)
+	  or have huge holes in the physical address space for other reasons.
+	  See <file:Documentation/vm/numa> for more.
+
+config NUMA
+	bool "NUMA Support"
+	depends on SGI_IP27
+	help
+	  Say Y to compile the kernel to support NUMA (Non-Uniform Memory
+	  Access).  This option is for configuring high-end multiprocessor
+	  server machines.  If in doubt, say N.
+
+config MAPPED_KERNEL
+	bool "Mapped kernel support"
+	depends on SGI_IP27
+	help
+	  Change the way a Linux kernel is loaded into memory on a MIPS64
+	  machine.  This is required in order to support text replication and
+	  NUMA.  If you need to understand it, read the source code.
+
+config REPLICATE_KTEXT
+	bool "Kernel text replication support"
+	depends on SGI_IP27
+	help
+	  Say Y here to enable replicating the kernel text across multiple
+	  nodes in a NUMA cluster.  This trades memory for speed.
+
+config REPLICATE_EXHANDLERS
+	bool "Exception handler replication support"
+	depends on SGI_IP27
+	help
+	  Say Y here to enable replicating the kernel exception handlers
+	  across multiple nodes in a NUMA cluster. This trades memory for
+	  speed.
diff --git a/arch/mips/sgi-ip27/ip27-berr.c b/arch/mips/sgi-ip27/ip27-berr.c
index e1829a5d3b19..07631a97670b 100644
--- a/arch/mips/sgi-ip27/ip27-berr.c
+++ b/arch/mips/sgi-ip27/ip27-berr.c
@@ -10,6 +10,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/signal.h>	/* for SIGBUS */
 
 #include <asm/module.h>
 #include <asm/sn/addrs.h>
diff --git a/arch/mips/sgi-ip27/ip27-console.c b/arch/mips/sgi-ip27/ip27-console.c
index d97f5b5ef844..3e1ac299b804 100644
--- a/arch/mips/sgi-ip27/ip27-console.c
+++ b/arch/mips/sgi-ip27/ip27-console.c
@@ -30,8 +30,10 @@
 static inline struct ioc3_uartregs *console_uart(void)
 {
 	struct ioc3 *ioc3;
+	nasid_t nasid;
 
-	ioc3 = (struct ioc3 *)KL_CONFIG_CH_CONS_INFO(get_nasid())->memory_base;
+	nasid = (master_nasid == INVALID_NASID) ? get_nasid() : master_nasid;
+	ioc3 = (struct ioc3 *)KL_CONFIG_CH_CONS_INFO(nasid)->memory_base;
 
 	return &ioc3->sregs.uarta;
 }
diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c
index 6dcee5c46c74..8651a0e75404 100644
--- a/arch/mips/sgi-ip27/ip27-init.c
+++ b/arch/mips/sgi-ip27/ip27-init.c
@@ -56,12 +56,12 @@ static void __init per_hub_init(cnodeid_t cnode)
 {
 	struct hub_data *hub = hub_data(cnode);
 	nasid_t nasid = COMPACT_TO_NASID_NODEID(cnode);
+	int i;
 
 	cpu_set(smp_processor_id(), hub->h_cpus);
 
 	if (test_and_set_bit(cnode, hub_init_mask))
 		return;
-
 	/*
 	 * Set CRB timeout at 5ms, (< PI timeout of 10ms)
 	 */
@@ -88,6 +88,24 @@ static void __init per_hub_init(cnodeid_t cnode)
 		__flush_cache_all();
 	}
 #endif
+
+	/*
+	 * Some interrupts are reserved by hardware or by software convention.
+	 * Mark these as reserved right away so they won't be used accidently
+	 * later.
+	 */
+	for (i = 0; i <= BASE_PCI_IRQ; i++) {
+		__set_bit(i, hub->irq_alloc_mask);
+		LOCAL_HUB_CLR_INTR(INT_PEND0_BASELVL + i);
+	}
+
+	__set_bit(IP_PEND0_6_63, hub->irq_alloc_mask);
+	LOCAL_HUB_S(PI_INT_PEND_MOD, IP_PEND0_6_63);
+
+	for (i = NI_BRDCAST_ERR_A; i <= MSC_PANIC_INTR; i++) {
+		__set_bit(i, hub->irq_alloc_mask);
+		LOCAL_HUB_CLR_INTR(INT_PEND1_BASELVL + i);
+	}
 }
 
 void __init per_cpu_init(void)
@@ -104,30 +122,12 @@ void __init per_cpu_init(void)
 
 	clear_c0_status(ST0_IM);
 
+	per_hub_init(cnode);
+
 	for (i = 0; i < LEVELS_PER_SLICE; i++)
 		si->level_to_irq[i] = -1;
 
 	/*
-	 * Some interrupts are reserved by hardware or by software convention.
-	 * Mark these as reserved right away so they won't be used accidently
-	 * later.
-	 */
-	for (i = 0; i <= BASE_PCI_IRQ; i++) {
-		__set_bit(i, si->irq_alloc_mask);
-		LOCAL_HUB_S(PI_INT_PEND_MOD, i);
-	}
-
-	__set_bit(IP_PEND0_6_63, si->irq_alloc_mask);
-	LOCAL_HUB_S(PI_INT_PEND_MOD, IP_PEND0_6_63);
-
-	for (i = NI_BRDCAST_ERR_A; i <= MSC_PANIC_INTR; i++) {
-		__set_bit(i, si->irq_alloc_mask + 1);
-		LOCAL_HUB_S(PI_INT_PEND_MOD, i);
-	}
-
-	LOCAL_HUB_L(PI_INT_PEND0);
-
-	/*
 	 * We use this so we can find the local hub's data as fast as only
 	 * possible.
 	 */
@@ -140,8 +140,6 @@ void __init per_cpu_init(void)
 	install_cpu_nmi_handler(cputoslice(cpu));
 
 	set_c0_status(SRB_DEV0 | SRB_DEV1);
-
-	per_hub_init(cnode);
 }
 
 /*
@@ -198,7 +196,7 @@ extern void ip27_setup_console(void);
 extern void ip27_time_init(void);
 extern void ip27_reboot_setup(void);
 
-static int __init ip27_setup(void)
+void __init plat_setup(void)
 {
 	hubreg_t p, e, n_mode;
 	nasid_t nid;
@@ -245,8 +243,4 @@ static int __init ip27_setup(void)
 	set_io_port_base(IO_BASE);
 
 	board_time_init = ip27_time_init;
-
-	return 0;
 }
-
-early_initcall(ip27_setup);
diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c
index 61817a18aed2..73e5e52781d8 100644
--- a/arch/mips/sgi-ip27/ip27-irq.c
+++ b/arch/mips/sgi-ip27/ip27-irq.c
@@ -5,6 +5,9 @@
  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
  * Copyright (C) 1999 - 2001 Kanoj Sarcar
  */
+
+#undef DEBUG
+
 #include <linux/config.h>
 #include <linux/init.h>
 #include <linux/irq.h>
@@ -14,11 +17,11 @@
 #include <linux/types.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
-#include <linux/irq.h>
 #include <linux/timex.h>
 #include <linux/slab.h>
 #include <linux/random.h>
 #include <linux/smp_lock.h>
+#include <linux/kernel.h>
 #include <linux/kernel_stat.h>
 #include <linux/delay.h>
 #include <linux/bitops.h>
@@ -37,13 +40,6 @@
 #include <asm/sn/hub.h>
 #include <asm/sn/intr.h>
 
-#undef DEBUG_IRQ
-#ifdef DEBUG_IRQ
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
 /*
  * Linux has a controller-independent x86 interrupt architecture.
  * every controller has a 'controller-template', that is used
@@ -74,14 +70,15 @@ extern int irq_to_slot[];
 
 static inline int alloc_level(int cpu, int irq)
 {
+	struct hub_data *hub = hub_data(cpu_to_node(cpu));
 	struct slice_data *si = cpu_data[cpu].data;
-	int level;				/* pre-allocated entries */
+	int level;
 
-	level = find_first_zero_bit(si->irq_alloc_mask, LEVELS_PER_SLICE);
+	level = find_first_zero_bit(hub->irq_alloc_mask, LEVELS_PER_SLICE);
 	if (level >= LEVELS_PER_SLICE)
 		panic("Cpu %d flooded with devices\n", cpu);
 
-	__set_bit(level, si->irq_alloc_mask);
+	__set_bit(level, hub->irq_alloc_mask);
 	si->level_to_irq[level] = irq;
 
 	return level;
@@ -216,9 +213,11 @@ static int intr_connect_level(int cpu, int bit)
 {
 	nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
 	struct slice_data *si = cpu_data[cpu].data;
+	unsigned long flags;
 
-	__set_bit(bit, si->irq_enable_mask);
+	set_bit(bit, si->irq_enable_mask);
 
+	local_irq_save(flags);
 	if (!cputoslice(cpu)) {
 		REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]);
 		REMOTE_HUB_S(nasid, PI_INT_MASK1_A, si->irq_enable_mask[1]);
@@ -226,6 +225,7 @@ static int intr_connect_level(int cpu, int bit)
 		REMOTE_HUB_S(nasid, PI_INT_MASK0_B, si->irq_enable_mask[0]);
 		REMOTE_HUB_S(nasid, PI_INT_MASK1_B, si->irq_enable_mask[1]);
 	}
+	local_irq_restore(flags);
 
 	return 0;
 }
@@ -235,7 +235,7 @@ static int intr_disconnect_level(int cpu, int bit)
 	nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
 	struct slice_data *si = cpu_data[cpu].data;
 
-	__clear_bit(bit, si->irq_enable_mask);
+	clear_bit(bit, si->irq_enable_mask);
 
 	if (!cputoslice(cpu)) {
 		REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]);
@@ -261,7 +261,7 @@ static unsigned int startup_bridge_irq(unsigned int irq)
 	bc = IRQ_TO_BRIDGE(irq);
 	bridge = bc->base;
 
-	DBG("bridge_startup(): irq= 0x%x  pin=%d\n", irq, pin);
+	pr_debug("bridge_startup(): irq= 0x%x  pin=%d\n", irq, pin);
 	/*
 	 * "map" irq to a swlevel greater than 6 since the first 6 bits
 	 * of INT_PEND0 are taken
@@ -298,12 +298,13 @@ static unsigned int startup_bridge_irq(unsigned int irq)
 static void shutdown_bridge_irq(unsigned int irq)
 {
 	struct bridge_controller *bc = IRQ_TO_BRIDGE(irq);
+	struct hub_data *hub = hub_data(cpu_to_node(bc->irq_cpu));
 	bridge_t *bridge = bc->base;
 	struct slice_data *si = cpu_data[bc->irq_cpu].data;
 	int pin, swlevel;
 	cpuid_t cpu;
 
-	DBG("bridge_shutdown: irq 0x%x\n", irq);
+	pr_debug("bridge_shutdown: irq 0x%x\n", irq);
 	pin = SLOT_FROM_PCI_IRQ(irq);
 
 	/*
@@ -313,7 +314,7 @@ static void shutdown_bridge_irq(unsigned int irq)
 	swlevel = find_level(&cpu, irq);
 	intr_disconnect_level(cpu, swlevel);
 
-	__clear_bit(swlevel, si->irq_alloc_mask);
+	__clear_bit(swlevel, hub->irq_alloc_mask);
 	si->level_to_irq[swlevel] = -1;
 
 	bridge->b_int_enable &= ~(1 << pin);
@@ -433,25 +434,24 @@ void install_ipi(void)
 	int slice = LOCAL_HUB_L(PI_CPU_NUM);
 	int cpu = smp_processor_id();
 	struct slice_data *si = cpu_data[cpu].data;
-	hubreg_t mask, set;
+	struct hub_data *hub = hub_data(cpu_to_node(cpu));
+	int resched, call;
+
+	resched = CPU_RESCHED_A_IRQ + slice;
+	__set_bit(resched, hub->irq_alloc_mask);
+	__set_bit(resched, si->irq_enable_mask);
+	LOCAL_HUB_CLR_INTR(resched);
+
+	call = CPU_CALL_A_IRQ + slice;
+	__set_bit(call, hub->irq_alloc_mask);
+	__set_bit(call, si->irq_enable_mask);
+	LOCAL_HUB_CLR_INTR(call);
 
 	if (slice == 0) {
-		LOCAL_HUB_CLR_INTR(CPU_RESCHED_A_IRQ);
-		LOCAL_HUB_CLR_INTR(CPU_CALL_A_IRQ);
-		mask = LOCAL_HUB_L(PI_INT_MASK0_A);	/* Slice A */
-		set = (1UL << CPU_RESCHED_A_IRQ) | (1UL << CPU_CALL_A_IRQ);
-		mask |= set;
-		si->irq_enable_mask[0] |= set;
-		si->irq_alloc_mask[0] |= set;
-		LOCAL_HUB_S(PI_INT_MASK0_A, mask);
+		LOCAL_HUB_S(PI_INT_MASK0_A, si->irq_enable_mask[0]);
+		LOCAL_HUB_S(PI_INT_MASK1_A, si->irq_enable_mask[1]);
 	} else {
-		LOCAL_HUB_CLR_INTR(CPU_RESCHED_B_IRQ);
-		LOCAL_HUB_CLR_INTR(CPU_CALL_B_IRQ);
-		mask = LOCAL_HUB_L(PI_INT_MASK0_B);	/* Slice B */
-		set = (1UL << CPU_RESCHED_B_IRQ) | (1UL << CPU_CALL_B_IRQ);
-		mask |= set;
-		si->irq_enable_mask[1] |= set;
-		si->irq_alloc_mask[1] |= set;
-		LOCAL_HUB_S(PI_INT_MASK0_B, mask);
+		LOCAL_HUB_S(PI_INT_MASK0_B, si->irq_enable_mask[0]);
+		LOCAL_HUB_S(PI_INT_MASK1_B, si->irq_enable_mask[1]);
 	}
 }
diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c
index 17f768cba94f..3a8291b7d26d 100644
--- a/arch/mips/sgi-ip27/ip27-smp.c
+++ b/arch/mips/sgi-ip27/ip27-smp.c
@@ -127,37 +127,28 @@ void cpu_node_probe(void)
 	printk("Discovered %d cpus on %d nodes\n", highest + 1, num_online_nodes());
 }
 
-static void intr_clear_bits(nasid_t nasid, volatile hubreg_t *pend,
-	int base_level)
+static __init void intr_clear_all(nasid_t nasid)
 {
-	volatile hubreg_t bits;
 	int i;
 
-	/* Check pending interrupts */
-	if ((bits = HUB_L(pend)) != 0)
-		for (i = 0; i < N_INTPEND_BITS; i++)
-			if (bits & (1 << i))
-				LOCAL_HUB_CLR_INTR(base_level + i);
-}
-
-static void intr_clear_all(nasid_t nasid)
-{
 	REMOTE_HUB_S(nasid, PI_INT_MASK0_A, 0);
 	REMOTE_HUB_S(nasid, PI_INT_MASK0_B, 0);
 	REMOTE_HUB_S(nasid, PI_INT_MASK1_A, 0);
 	REMOTE_HUB_S(nasid, PI_INT_MASK1_B, 0);
-	intr_clear_bits(nasid, REMOTE_HUB_ADDR(nasid, PI_INT_PEND0),
-	                INT_PEND0_BASELVL);
-	intr_clear_bits(nasid, REMOTE_HUB_ADDR(nasid, PI_INT_PEND1),
-	                INT_PEND1_BASELVL);
+
+	for (i = 0; i < 128; i++)
+		REMOTE_HUB_CLR_INTR(nasid, i);
 }
 
 void __init prom_prepare_cpus(unsigned int max_cpus)
 {
 	cnodeid_t	cnode;
 
-	for_each_online_node(cnode)
+	for_each_online_node(cnode) {
+		if (cnode == 0)
+			continue;
 		intr_clear_all(COMPACT_TO_NASID_NODEID(cnode));
+	}
 
 	replicate_kernel_text();
 
diff --git a/arch/mips/sgi-ip32/crime.c b/arch/mips/sgi-ip32/crime.c
index eb3a16a04fee..41b5eca1148c 100644
--- a/arch/mips/sgi-ip32/crime.c
+++ b/arch/mips/sgi-ip32/crime.c
@@ -10,6 +10,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <asm/bootinfo.h>
 #include <asm/io.h>
 #include <asm/mipsregs.h>
@@ -18,8 +19,10 @@
 #include <asm/ip32/crime.h>
 #include <asm/ip32/mace.h>
 
-struct sgi_crime *crime;
-struct sgi_mace *mace;
+struct sgi_crime __iomem *crime;
+struct sgi_mace __iomem *mace;
+
+EXPORT_SYMBOL_GPL(mace);
 
 void __init crime_init(void)
 {
diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c
index fc3a8e90d763..2eb22d692ed9 100644
--- a/arch/mips/sgi-ip32/ip32-irq.c
+++ b/arch/mips/sgi-ip32/ip32-irq.c
@@ -163,14 +163,13 @@ static void end_cpu_irq(unsigned int irq)
 #define mask_and_ack_cpu_irq disable_cpu_irq
 
 static struct hw_interrupt_type ip32_cpu_interrupt = {
-	"IP32 CPU",
-	startup_cpu_irq,
-	shutdown_cpu_irq,
-	enable_cpu_irq,
-	disable_cpu_irq,
-	mask_and_ack_cpu_irq,
-	end_cpu_irq,
-	NULL
+	.typename = "IP32 CPU",
+	.startup = startup_cpu_irq,
+	.shutdown = shutdown_cpu_irq,
+	.enable = enable_cpu_irq,
+	.disable = disable_cpu_irq,
+	.ack = mask_and_ack_cpu_irq,
+	.end = end_cpu_irq,
 };
 
 /*
@@ -234,14 +233,13 @@ static void end_crime_irq(unsigned int irq)
 #define shutdown_crime_irq disable_crime_irq
 
 static struct hw_interrupt_type ip32_crime_interrupt = {
-	"IP32 CRIME",
-	startup_crime_irq,
-	shutdown_crime_irq,
-	enable_crime_irq,
-	disable_crime_irq,
-	mask_and_ack_crime_irq,
-	end_crime_irq,
-	NULL
+	.typename = "IP32 CRIME",
+	.startup = startup_crime_irq,
+	.shutdown = shutdown_crime_irq,
+	.enable = enable_crime_irq,
+	.disable = disable_crime_irq,
+	.ack = mask_and_ack_crime_irq,
+	.end = end_crime_irq,
 };
 
 /*
@@ -294,14 +292,13 @@ static void end_macepci_irq(unsigned int irq)
 #define mask_and_ack_macepci_irq disable_macepci_irq
 
 static struct hw_interrupt_type ip32_macepci_interrupt = {
-	"IP32 MACE PCI",
-	startup_macepci_irq,
-	shutdown_macepci_irq,
-	enable_macepci_irq,
-	disable_macepci_irq,
-	mask_and_ack_macepci_irq,
-	end_macepci_irq,
-	NULL
+	.typename = "IP32 MACE PCI",
+	.startup = startup_macepci_irq,
+	.shutdown = shutdown_macepci_irq,
+	.enable = enable_macepci_irq,
+	.disable = disable_macepci_irq,
+	.ack = mask_and_ack_macepci_irq,
+	.end = end_macepci_irq,
 };
 
 /* This is used for MACE ISA interrupts.  That means bits 4-6 in the
@@ -425,14 +422,13 @@ static void end_maceisa_irq(unsigned irq)
 #define shutdown_maceisa_irq disable_maceisa_irq
 
 static struct hw_interrupt_type ip32_maceisa_interrupt = {
-	"IP32 MACE ISA",
-	startup_maceisa_irq,
-	shutdown_maceisa_irq,
-	enable_maceisa_irq,
-	disable_maceisa_irq,
-	mask_and_ack_maceisa_irq,
-	end_maceisa_irq,
-	NULL
+	.typename = "IP32 MACE ISA",
+	.startup = startup_maceisa_irq,
+	.shutdown = shutdown_maceisa_irq,
+	.enable = enable_maceisa_irq,
+	.disable = disable_maceisa_irq,
+	.ack = mask_and_ack_maceisa_irq,
+	.end = end_maceisa_irq,
 };
 
 /* This is used for regular non-ISA, non-PCI MACE interrupts.  That means
@@ -476,14 +472,13 @@ static void end_mace_irq(unsigned int irq)
 #define mask_and_ack_mace_irq disable_mace_irq
 
 static struct hw_interrupt_type ip32_mace_interrupt = {
-	"IP32 MACE",
-	startup_mace_irq,
-	shutdown_mace_irq,
-	enable_mace_irq,
-	disable_mace_irq,
-	mask_and_ack_mace_irq,
-	end_mace_irq,
-	NULL
+	.typename = "IP32 MACE",
+	.startup = startup_mace_irq,
+	.shutdown = shutdown_mace_irq,
+	.enable = enable_mace_irq,
+	.disable = disable_mace_irq,
+	.ack = mask_and_ack_mace_irq,
+	.end = end_mace_irq,
 };
 
 static void ip32_unknown_interrupt(struct pt_regs *regs)
diff --git a/arch/mips/sgi-ip32/ip32-memory.c b/arch/mips/sgi-ip32/ip32-memory.c
index fc76ca92bab9..d37d40a3cdae 100644
--- a/arch/mips/sgi-ip32/ip32-memory.c
+++ b/arch/mips/sgi-ip32/ip32-memory.c
@@ -36,8 +36,8 @@ void __init prom_meminit (void)
 		if (base + size > (256 << 20))
 			base += CRIME_HI_MEM_BASE;
 
-		printk("CRIME MC: bank %u base 0x%016lx size %luMB\n",
-			bank, base, size);
+		printk("CRIME MC: bank %u base 0x%016lx size %luMiB\n",
+			bank, base, size >> 20);
 		add_memory_region (base, size, BOOT_MEM_RAM);
 	}
 }
diff --git a/arch/mips/sgi-ip32/ip32-setup.c b/arch/mips/sgi-ip32/ip32-setup.c
index 8d270be58224..d10a269aeae1 100644
--- a/arch/mips/sgi-ip32/ip32-setup.c
+++ b/arch/mips/sgi-ip32/ip32-setup.c
@@ -92,7 +92,7 @@ void __init ip32_timer_setup(struct irqaction *irq)
 	setup_irq(IP32_R4K_TIMER_IRQ, irq);
 }
 
-static int __init ip32_setup(void)
+void __init plat_setup(void)
 {
 	board_be_init = ip32_be_init;
 
@@ -152,8 +152,4 @@ static int __init ip32_setup(void)
 		}
 	}
 #endif
-
-	return 0;
 }
-
-early_initcall(ip32_setup);
diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig
new file mode 100644
index 000000000000..de46f62ac462
--- /dev/null
+++ b/arch/mips/sibyte/Kconfig
@@ -0,0 +1,161 @@
+config SIBYTE_SB1250
+	bool
+	select HW_HAS_PCI
+	select SIBYTE_HAS_LDT
+	select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_BCM1120
+	bool
+	select SIBYTE_BCM112X
+	select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_BCM1125
+	bool
+	select HW_HAS_PCI
+	select SIBYTE_BCM112X
+	select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_BCM1125H
+	bool
+	select HW_HAS_PCI
+	select SIBYTE_BCM112X
+	select SIBYTE_HAS_LDT
+	select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_BCM112X
+	bool
+	select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_BCM1x80
+	bool
+	select HW_HAS_PCI
+	select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_BCM1x55
+	bool
+	select HW_HAS_PCI
+	select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_SB1xxx_SOC
+	bool
+	depends on EXPERIMENTAL
+	select DMA_COHERENT
+	select SIBYTE_CFE
+	select SWAP_IO_SPACE
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL
+
+choice
+	prompt "SiByte SOC Stepping"
+	depends on SIBYTE_SB1xxx_SOC
+
+config CPU_SB1_PASS_1
+	bool "1250 Pass1"
+	depends on SIBYTE_SB1250
+	select CPU_HAS_PREFETCH
+
+config CPU_SB1_PASS_2_1250
+	bool "1250 An"
+	depends on SIBYTE_SB1250
+	select CPU_SB1_PASS_2
+	help
+	  Also called BCM1250 Pass 2
+
+config CPU_SB1_PASS_2_2
+	bool "1250 Bn"
+	depends on SIBYTE_SB1250
+	select CPU_HAS_PREFETCH
+	help
+	  Also called BCM1250 Pass 2.2
+
+config CPU_SB1_PASS_4
+	bool "1250 Cn"
+	depends on SIBYTE_SB1250
+	select CPU_HAS_PREFETCH
+	help
+	  Also called BCM1250 Pass 3
+
+config CPU_SB1_PASS_2_112x
+	bool "112x Hybrid"
+	depends on SIBYTE_BCM112X
+	select CPU_SB1_PASS_2
+
+config CPU_SB1_PASS_3
+	bool "112x An"
+	depends on SIBYTE_BCM112X
+	select CPU_HAS_PREFETCH
+
+endchoice
+
+config CPU_SB1_PASS_2
+	bool
+
+config SIBYTE_HAS_LDT
+	bool
+	depends on PCI && (SIBYTE_SB1250 || SIBYTE_BCM1125H)
+	default y
+
+config SIMULATION
+	bool "Running under simulation"
+	depends on SIBYTE_SB1xxx_SOC
+	help
+	  Build a kernel suitable for running under the GDB simulator.
+	  Primarily adjusts the kernel's notion of time.
+
+config CONFIG_SB1_CEX_ALWAYS_FATAL
+	bool "All cache exceptions considered fatal (no recovery attempted)"
+	depends on SIBYTE_SB1xxx_SOC
+
+config CONFIG_SB1_CERR_STALL
+	bool "Stall (rather than panic) on fatal cache error"
+	depends on SIBYTE_SB1xxx_SOC
+
+config SIBYTE_CFE
+	bool "Booting from CFE"
+	depends on SIBYTE_SB1xxx_SOC
+	help
+	  Make use of the CFE API for enumerating available memory,
+	  controlling secondary CPUs, and possibly console output.
+
+config SIBYTE_CFE_CONSOLE
+	bool "Use firmware console"
+	depends on SIBYTE_CFE
+	help
+	  Use the CFE API's console write routines during boot.  Other console
+	  options (VT console, sb1250 duart console, etc.) should not be
+	  configured.
+
+config SIBYTE_STANDALONE
+	bool
+	depends on SIBYTE_SB1xxx_SOC && !SIBYTE_CFE
+	default y
+
+config SIBYTE_STANDALONE_RAM_SIZE
+	int "Memory size (in megabytes)"
+	depends on SIBYTE_STANDALONE
+	default "32"
+
+config SIBYTE_BUS_WATCHER
+	bool "Support for Bus Watcher statistics"
+	depends on SIBYTE_SB1xxx_SOC
+	help
+	  Handle and keep statistics on the bus error interrupts (COR_ECC,
+	  BAD_ECC, IO_BUS).
+
+config SIBYTE_BW_TRACE
+	bool "Capture bus trace before bus error"
+	depends on SIBYTE_BUS_WATCHER
+	help
+	  Run a continuous bus trace, dumping the raw data as soon as
+	  a ZBbus error is detected.  Cannot work if ZBbus profiling
+	  is turned on, and also will interfere with JTAG-based trace
+	  buffer activity.  Raw buffer data is dumped to console, and
+	  must be processed off-line.
+
+config SIBYTE_SB1250_PROF
+	bool "Support for SB1/SOC profiling - SB1/SCD perf counters"
+	depends on SIBYTE_SB1xxx_SOC
+
+config SIBYTE_TBPROF
+	bool "Support for ZBbus profiling"
+	depends on SIBYTE_SB1xxx_SOC
diff --git a/arch/mips/sibyte/bcm1480/Makefile b/arch/mips/sibyte/bcm1480/Makefile
new file mode 100644
index 000000000000..538d5a51ae94
--- /dev/null
+++ b/arch/mips/sibyte/bcm1480/Makefile
@@ -0,0 +1,5 @@
+obj-y := setup.o irq.o irq_handler.o time.o
+
+obj-$(CONFIG_SMP)			+= smp.o
+
+EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
new file mode 100644
index 000000000000..b2a1ba5d23df
--- /dev/null
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -0,0 +1,476 @@
+/*
+ * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/kernel_stat.h>
+
+#include <asm/errno.h>
+#include <asm/signal.h>
+#include <asm/system.h>
+#include <asm/ptrace.h>
+#include <asm/io.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+#include <asm/sibyte/bcm1480_scd.h>
+
+#include <asm/sibyte/sb1250_uart.h>
+#include <asm/sibyte/sb1250.h>
+
+/*
+ * These are the routines that handle all the low level interrupt stuff.
+ * Actions handled here are: initialization of the interrupt map, requesting of
+ * interrupt lines by handlers, dispatching if interrupts to handlers, probing
+ * for interrupt lines
+ */
+
+
+#define shutdown_bcm1480_irq	disable_bcm1480_irq
+static void end_bcm1480_irq(unsigned int irq);
+static void enable_bcm1480_irq(unsigned int irq);
+static void disable_bcm1480_irq(unsigned int irq);
+static unsigned int startup_bcm1480_irq(unsigned int irq);
+static void ack_bcm1480_irq(unsigned int irq);
+#ifdef CONFIG_SMP
+static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask);
+#endif
+
+#ifdef CONFIG_PCI
+extern unsigned long ht_eoi_space;
+#endif
+
+#ifdef CONFIG_KGDB
+#include <asm/gdb-stub.h>
+extern void breakpoint(void);
+static int kgdb_irq;
+#ifdef CONFIG_GDB_CONSOLE
+extern void register_gdb_console(void);
+#endif
+
+/* kgdb is on when configured.  Pass "nokgdb" kernel arg to turn it off */
+static int kgdb_flag = 1;
+static int __init nokgdb(char *str)
+{
+	kgdb_flag = 0;
+	return 1;
+}
+__setup("nokgdb", nokgdb);
+
+/* Default to UART1 */
+int kgdb_port = 1;
+#ifdef CONFIG_SIBYTE_SB1250_DUART
+extern char sb1250_duart_present[];
+#endif
+#endif
+
+static struct hw_interrupt_type bcm1480_irq_type = {
+	.typename = "BCM1480-IMR",
+	.startup = startup_bcm1480_irq,
+	.shutdown = shutdown_bcm1480_irq,
+	.enable = enable_bcm1480_irq,
+	.disable = disable_bcm1480_irq,
+	.ack = ack_bcm1480_irq,
+	.end = end_bcm1480_irq,
+#ifdef CONFIG_SMP
+	.set_affinity = bcm1480_set_affinity
+#endif
+};
+
+/* Store the CPU id (not the logical number) */
+int bcm1480_irq_owner[BCM1480_NR_IRQS];
+
+DEFINE_SPINLOCK(bcm1480_imr_lock);
+
+void bcm1480_mask_irq(int cpu, int irq)
+{
+	unsigned long flags;
+	u64 cur_ints,hl_spacing;
+
+	spin_lock_irqsave(&bcm1480_imr_lock, flags);
+	hl_spacing = 0;
+	if ((irq >= BCM1480_NR_IRQS_HALF) && (irq <= BCM1480_NR_IRQS)) {
+		hl_spacing = BCM1480_IMR_HL_SPACING;
+		irq -= BCM1480_NR_IRQS_HALF;
+	}
+	cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
+	cur_ints |= (((u64) 1) << irq);
+	____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
+	spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
+}
+
+void bcm1480_unmask_irq(int cpu, int irq)
+{
+	unsigned long flags;
+	u64 cur_ints,hl_spacing;
+
+	spin_lock_irqsave(&bcm1480_imr_lock, flags);
+	hl_spacing = 0;
+	if ((irq >= BCM1480_NR_IRQS_HALF) && (irq <= BCM1480_NR_IRQS)) {
+		hl_spacing = BCM1480_IMR_HL_SPACING;
+		irq -= BCM1480_NR_IRQS_HALF;
+	}
+	cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
+	cur_ints &= ~(((u64) 1) << irq);
+	____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
+	spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
+}
+
+#ifdef CONFIG_SMP
+static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask)
+{
+	int i = 0, old_cpu, cpu, int_on;
+	u64 cur_ints;
+	irq_desc_t *desc = irq_desc + irq;
+	unsigned long flags;
+	unsigned int irq_dirty;
+
+	i = first_cpu(mask);
+	if (next_cpu(i, mask) <= NR_CPUS) {
+		printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
+		return;
+	}
+
+	/* Convert logical CPU to physical CPU */
+	cpu = cpu_logical_map(i);
+
+	/* Protect against other affinity changers and IMR manipulation */
+	spin_lock_irqsave(&desc->lock, flags);
+	spin_lock(&bcm1480_imr_lock);
+
+	/* Swizzle each CPU's IMR (but leave the IP selection alone) */
+	old_cpu = bcm1480_irq_owner[irq];
+	irq_dirty = irq;
+	if ((irq_dirty >= BCM1480_NR_IRQS_HALF) && (irq_dirty <= BCM1480_NR_IRQS)) {
+		irq_dirty -= BCM1480_NR_IRQS_HALF;
+	}
+
+	int k;
+	for (k=0; k<2; k++) { /* Loop through high and low interrupt mask register */
+		cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(old_cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
+		int_on = !(cur_ints & (((u64) 1) << irq_dirty));
+		if (int_on) {
+			/* If it was on, mask it */
+			cur_ints |= (((u64) 1) << irq_dirty);
+			____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(old_cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
+		}
+		bcm1480_irq_owner[irq] = cpu;
+		if (int_on) {
+			/* unmask for the new CPU */
+			cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
+			cur_ints &= ~(((u64) 1) << irq_dirty);
+			____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
+		}
+	}
+	spin_unlock(&bcm1480_imr_lock);
+	spin_unlock_irqrestore(&desc->lock, flags);
+}
+#endif
+
+
+/* Defined in arch/mips/sibyte/bcm1480/irq_handler.S */
+extern void bcm1480_irq_handler(void);
+
+/*****************************************************************************/
+
+static unsigned int startup_bcm1480_irq(unsigned int irq)
+{
+	bcm1480_unmask_irq(bcm1480_irq_owner[irq], irq);
+
+	return 0;		/* never anything pending */
+}
+
+
+static void disable_bcm1480_irq(unsigned int irq)
+{
+	bcm1480_mask_irq(bcm1480_irq_owner[irq], irq);
+}
+
+static void enable_bcm1480_irq(unsigned int irq)
+{
+	bcm1480_unmask_irq(bcm1480_irq_owner[irq], irq);
+}
+
+
+static void ack_bcm1480_irq(unsigned int irq)
+{
+	u64 pending;
+	unsigned int irq_dirty;
+
+	/*
+	 * If the interrupt was an HT interrupt, now is the time to
+	 * clear it.  NOTE: we assume the HT bridge was set up to
+	 * deliver the interrupts to all CPUs (which makes affinity
+	 * changing easier for us)
+	 */
+	irq_dirty = irq;
+	if ((irq_dirty >= BCM1480_NR_IRQS_HALF) && (irq_dirty <= BCM1480_NR_IRQS)) {
+		irq_dirty -= BCM1480_NR_IRQS_HALF;
+	}
+	int k;
+	for (k=0; k<2; k++) { /* Loop through high and low LDT interrupts */
+		pending = __raw_readq(IOADDR(A_BCM1480_IMR_REGISTER(bcm1480_irq_owner[irq],
+						R_BCM1480_IMR_LDT_INTERRUPT_H + (k*BCM1480_IMR_HL_SPACING))));
+		pending &= ((u64)1 << (irq_dirty));
+		if (pending) {
+#ifdef CONFIG_SMP
+			int i;
+			for (i=0; i<NR_CPUS; i++) {
+				/*
+				 * Clear for all CPUs so an affinity switch
+				 * doesn't find an old status
+				 */
+				__raw_writeq(pending, IOADDR(A_BCM1480_IMR_REGISTER(cpu_logical_map(i),
+								R_BCM1480_IMR_LDT_INTERRUPT_CLR_H + (k*BCM1480_IMR_HL_SPACING))));
+			}
+#else
+			__raw_writeq(pending, IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_LDT_INTERRUPT_CLR_H + (k*BCM1480_IMR_HL_SPACING))));
+#endif
+
+			/*
+			 * Generate EOI.  For Pass 1 parts, EOI is a nop.  For
+			 * Pass 2, the LDT world may be edge-triggered, but
+			 * this EOI shouldn't hurt.  If they are
+			 * level-sensitive, the EOI is required.
+			 */
+#ifdef CONFIG_PCI
+			if (ht_eoi_space)
+				*(uint32_t *)(ht_eoi_space+(irq<<16)+(7<<2)) = 0;
+#endif
+		}
+	}
+	bcm1480_mask_irq(bcm1480_irq_owner[irq], irq);
+}
+
+
+static void end_bcm1480_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
+		bcm1480_unmask_irq(bcm1480_irq_owner[irq], irq);
+	}
+}
+
+
+void __init init_bcm1480_irqs(void)
+{
+	int i;
+
+	for (i = 0; i < NR_IRQS; i++) {
+		irq_desc[i].status = IRQ_DISABLED;
+		irq_desc[i].action = 0;
+		irq_desc[i].depth = 1;
+		if (i < BCM1480_NR_IRQS) {
+			irq_desc[i].handler = &bcm1480_irq_type;
+			bcm1480_irq_owner[i] = 0;
+		} else {
+			irq_desc[i].handler = &no_irq_type;
+		}
+	}
+}
+
+
+static irqreturn_t bcm1480_dummy_handler(int irq, void *dev_id,
+	struct pt_regs *regs)
+{
+	return IRQ_NONE;
+}
+
+static struct irqaction bcm1480_dummy_action = {
+	.handler = bcm1480_dummy_handler,
+	.flags   = 0,
+	.mask    = CPU_MASK_NONE,
+	.name    = "bcm1480-private",
+	.next    = NULL,
+	.dev_id  = 0
+};
+
+int bcm1480_steal_irq(int irq)
+{
+	irq_desc_t *desc = irq_desc + irq;
+	unsigned long flags;
+	int retval = 0;
+
+	if (irq >= BCM1480_NR_IRQS)
+		return -EINVAL;
+
+	spin_lock_irqsave(&desc->lock,flags);
+	/* Don't allow sharing at all for these */
+	if (desc->action != NULL)
+		retval = -EBUSY;
+	else {
+		desc->action = &bcm1480_dummy_action;
+		desc->depth = 0;
+	}
+	spin_unlock_irqrestore(&desc->lock,flags);
+	return 0;
+}
+
+/*
+ *  init_IRQ is called early in the boot sequence from init/main.c.  It
+ *  is responsible for setting up the interrupt mapper and installing the
+ *  handler that will be responsible for dispatching interrupts to the
+ *  "right" place.
+ */
+/*
+ * For now, map all interrupts to IP[2].  We could save
+ * some cycles by parceling out system interrupts to different
+ * IP lines, but keep it simple for bringup.  We'll also direct
+ * all interrupts to a single CPU; we should probably route
+ * PCI and LDT to one cpu and everything else to the other
+ * to balance the load a bit.
+ *
+ * On the second cpu, everything is set to IP5, which is
+ * ignored, EXCEPT the mailbox interrupt.  That one is
+ * set to IP[2] so it is handled.  This is needed so we
+ * can do cross-cpu function calls, as requred by SMP
+ */
+
+#define IMR_IP2_VAL	K_BCM1480_INT_MAP_I0
+#define IMR_IP3_VAL	K_BCM1480_INT_MAP_I1
+#define IMR_IP4_VAL	K_BCM1480_INT_MAP_I2
+#define IMR_IP5_VAL	K_BCM1480_INT_MAP_I3
+#define IMR_IP6_VAL	K_BCM1480_INT_MAP_I4
+
+void __init arch_init_irq(void)
+{
+
+	unsigned int i, cpu;
+	u64 tmp;
+	unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 |
+		STATUSF_IP1 | STATUSF_IP0;
+
+	/* Default everything to IP2 */
+	/* Start with _high registers which has no bit 0 interrupt source */
+	for (i = 1; i < BCM1480_NR_IRQS_HALF; i++) {	/* was I0 */
+		for (cpu = 0; cpu < 4; cpu++) {
+			__raw_writeq(IMR_IP2_VAL,
+				     IOADDR(A_BCM1480_IMR_REGISTER(cpu,
+								   R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + (i << 3)));
+		}
+	}
+
+	/* Now do _low registers */
+	for (i = 0; i < BCM1480_NR_IRQS_HALF; i++) {
+		for (cpu = 0; cpu < 4; cpu++) {
+			__raw_writeq(IMR_IP2_VAL,
+				     IOADDR(A_BCM1480_IMR_REGISTER(cpu,
+								   R_BCM1480_IMR_INTERRUPT_MAP_BASE_L) + (i << 3)));
+		}
+	}
+
+	init_bcm1480_irqs();
+
+	/*
+	 * Map the high 16 bits of mailbox_0 registers to IP[3], for
+	 * inter-cpu messages
+	 */
+	/* Was I1 */
+	for (cpu = 0; cpu < 4; cpu++) {
+		__raw_writeq(IMR_IP3_VAL, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
+						 (K_BCM1480_INT_MBOX_0_0 << 3)));
+        }
+
+
+	/* Clear the mailboxes.  The firmware may leave them dirty */
+	for (cpu = 0; cpu < 4; cpu++) {
+		__raw_writeq(0xffffffffffffffffULL,
+			     IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_MAILBOX_0_CLR_CPU)));
+		__raw_writeq(0xffffffffffffffffULL,
+			     IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_MAILBOX_1_CLR_CPU)));
+	}
+
+
+	/* Mask everything except the high 16 bit of mailbox_0 registers for all cpus */
+	tmp = ~((u64) 0) ^ ( (((u64) 1) << K_BCM1480_INT_MBOX_0_0));
+	for (cpu = 0; cpu < 4; cpu++) {
+		__raw_writeq(tmp, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MASK_H)));
+	}
+	tmp = ~((u64) 0);
+	for (cpu = 0; cpu < 4; cpu++) {
+		__raw_writeq(tmp, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MASK_L)));
+	}
+
+	bcm1480_steal_irq(K_BCM1480_INT_MBOX_0_0);
+
+	/*
+	 * Note that the timer interrupts are also mapped, but this is
+	 * done in bcm1480_time_init().  Also, the profiling driver
+	 * does its own management of IP7.
+	 */
+
+#ifdef CONFIG_KGDB
+	imask |= STATUSF_IP6;
+#endif
+	/* Enable necessary IPs, disable the rest */
+	change_c0_status(ST0_IM, imask);
+	set_except_vector(0, bcm1480_irq_handler);
+
+#ifdef CONFIG_KGDB
+	if (kgdb_flag) {
+		kgdb_irq = K_BCM1480_INT_UART_0 + kgdb_port;
+
+#ifdef CONFIG_SIBYTE_SB1250_DUART
+		sb1250_duart_present[kgdb_port] = 0;
+#endif
+		/* Setup uart 1 settings, mapper */
+		/* QQQ FIXME */
+		__raw_writeq(M_DUART_IMR_BRK, IO_SPACE_BASE + A_DUART_IMRREG(kgdb_port));
+
+		bcm1480_steal_irq(kgdb_irq);
+		__raw_writeq(IMR_IP6_VAL,
+			     IO_SPACE_BASE + A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
+			     (kgdb_irq<<3));
+		bcm1480_unmask_irq(0, kgdb_irq);
+
+#ifdef CONFIG_GDB_CONSOLE
+		register_gdb_console();
+#endif
+		prom_printf("Waiting for GDB on UART port %d\n", kgdb_port);
+		set_debug_traps();
+		breakpoint();
+	}
+#endif
+}
+
+#ifdef CONFIG_KGDB
+
+#include <linux/delay.h>
+
+#define duart_out(reg, val)     csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port,reg)))
+#define duart_in(reg)           csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port,reg)))
+
+void bcm1480_kgdb_interrupt(struct pt_regs *regs)
+{
+	/*
+	 * Clear break-change status (allow some time for the remote
+	 * host to stop the break, since we would see another
+	 * interrupt on the end-of-break too)
+	 */
+	kstat.irqs[smp_processor_id()][kgdb_irq]++;
+	mdelay(500);
+	duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT |
+				M_DUART_RX_EN | M_DUART_TX_EN);
+	set_async_breakpoint(&regs->cp0_epc);
+}
+
+#endif 	/* CONFIG_KGDB */
diff --git a/arch/mips/sibyte/bcm1480/irq_handler.S b/arch/mips/sibyte/bcm1480/irq_handler.S
new file mode 100644
index 000000000000..408db88d050f
--- /dev/null
+++ b/arch/mips/sibyte/bcm1480/irq_handler.S
@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+/*
+ * bcm1480_irq_handler() is the routine that is actually called when an
+ * interrupt occurs.  It is installed as the exception vector handler in
+ * init_IRQ() in arch/mips/sibyte/bcm1480/irq.c
+ *
+ * In the handle we figure out which interrupts need handling, and use that
+ * to call the dispatcher, which will take care of actually calling
+ * registered handlers
+ *
+ * Note that we take care of all raised interrupts in one go at the handler.
+ * This is more BSDish than the Indy code, and also, IMHO, more sane.
+ */
+#include <linux/config.h>
+
+#include <asm/addrspace.h>
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+#include <asm/sibyte/sb1250_defs.h>
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+
+/*
+ * What a pain. We have to be really careful saving the upper 32 bits of any
+ * register across function calls if we don't want them trashed--since were
+ * running in -o32, the calling routing never saves the full 64 bits of a
+ * register across a function call.  Being the interrupt handler, we're
+ * guaranteed that interrupts are disabled during this code so we don't have
+ * to worry about random interrupts blasting the high 32 bits.
+ */
+
+	.text
+	.set	push
+	.set	noreorder
+	.set	noat
+	.set	mips64
+	#.set	mips4
+	.align	5
+	NESTED(bcm1480_irq_handler, PT_SIZE, sp)
+	SAVE_ALL
+	CLI
+
+#ifdef CONFIG_SIBYTE_BCM1480_PROF
+	/* Set compare to count to silence count/compare timer interrupts */
+	mfc0	t1, CP0_COUNT
+	mtc0	t1, CP0_COMPARE /* pause to clear IP[7] bit of cause ? */
+#endif
+	/* Read cause */
+	mfc0	s0, CP0_CAUSE
+
+#ifdef CONFIG_SIBYTE_BCM1480_PROF
+	/* Cpu performance counter interrupt is routed to IP[7] */
+	andi	t1, s0, CAUSEF_IP7
+	beqz	t1, 0f
+	 srl	t1, s0, (CAUSEB_BD-2)	/* Shift BD bit to bit 2 */
+	and	t1, t1, 0x4		/* mask to get just BD bit */
+#ifdef CONFIG_MIPS64
+	dmfc0	a0, CP0_EPC
+	daddu	a0, a0, t1		/* a0 = EPC + (BD ? 4 :	0) */
+#else
+	mfc0	a0, CP0_EPC
+	addu	a0, a0, t1		/* a0 = EPC + (BD ? 4 :	0) */
+#endif
+	jal	sbprof_cpu_intr
+	 nop
+	j	ret_from_irq
+	 nop
+0:
+#endif
+
+	/* Timer interrupt is routed to IP[4] */
+	andi	t1, s0, CAUSEF_IP4
+	beqz	t1, 1f
+	 nop
+	jal	bcm1480_timer_interrupt
+	 move	a0, sp			/* Pass the registers along */
+	j	ret_from_irq
+	 nop				/* delay slot  */
+1:
+
+#ifdef CONFIG_SMP
+	/* Mailbox interrupt is routed to IP[3] */
+	andi	 t1, s0, CAUSEF_IP3
+	beqz	 t1, 2f
+	 nop
+	jal	 bcm1480_mailbox_interrupt
+	 move	 a0, sp
+	j	 ret_from_irq
+	 nop				/* delay slot  */
+2:
+#endif
+
+#ifdef CONFIG_KGDB
+	/* KGDB (uart 1) interrupt is routed to IP[6] */
+	andi	 t1, s0, CAUSEF_IP6
+	beqz	 t1, 3f
+	 nop				/* delay slot  */
+	jal	 bcm1480_kgdb_interrupt
+	 move	 a0, sp
+	j	 ret_from_irq
+	 nop				/* delay slot  */
+3:
+#endif
+
+	and	 t1, s0, CAUSEF_IP2
+	beqz	 t1, 9f
+	 nop
+
+	/*
+	 * Default...we've hit an IP[2] interrupt, which means we've got
+	 * to check the 1480 interrupt registers to figure out what to do
+	 * Need to detect which CPU we're on, now that smp_affinity is
+	 * supported.
+	 */
+	PTR_LA	 v0, CKSEG1 + A_BCM1480_IMR_CPU0_BASE
+#ifdef CONFIG_SMP
+	lw	 t1, TI_CPU($28)
+	sll	 t1, t1, BCM1480_IMR_REGISTER_SPACING_SHIFT
+	addu	 v0, v0, t1
+#endif
+
+	/* Read IP[2] status (get both high and low halves of status) */
+	ld	 s0, R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H(v0)
+	ld	 s1, R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L(v0)
+
+	move	 s2, zero	/* intr number  */
+	li	 s3, 64
+
+	beqz	 s0, 9f		/* No interrupts.  Return.  */
+	 move	 a1, sp
+
+	xori	 s4, s0, 1	/* if s0 (_H) == 1, it's a low intr, so...  */
+	movz	 s2, s3, s4	/* start the intr number at 64, and  */
+	movz	 s0, s1, s4	/* look at the low status value.  */
+
+	dclz	 s1, s0		/* Find the next interrupt.  */
+	dsubu	 a0, zero, s1
+	daddiu	 a0, a0, 63
+	jal	 do_IRQ
+	 daddu	 a0, a0, s2
+
+9:	j	 ret_from_irq
+	 nop
+
+	.set pop
+	END(bcm1480_irq_handler)
diff --git a/arch/mips/sibyte/bcm1480/setup.c b/arch/mips/sibyte/bcm1480/setup.c
new file mode 100644
index 000000000000..d90a0b87874c
--- /dev/null
+++ b/arch/mips/sibyte/bcm1480/setup.c
@@ -0,0 +1,136 @@
+/*
+ * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+#include <asm/mipsregs.h>
+#include <asm/io.h>
+#include <asm/sibyte/sb1250.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_scd.h>
+#include <asm/sibyte/sb1250_scd.h>
+
+unsigned int sb1_pass;
+unsigned int soc_pass;
+unsigned int soc_type;
+unsigned int periph_rev;
+unsigned int zbbus_mhz;
+
+static unsigned int part_type;
+
+static char *soc_str;
+static char *pass_str;
+
+static inline int setup_bcm1x80_bcm1x55(void);
+
+/* Setup code likely to be common to all SiByte platforms */
+
+static inline int sys_rev_decode(void)
+{
+	int ret = 0;
+
+	switch (soc_type) {
+	    case K_SYS_SOC_TYPE_BCM1x80:
+		if (part_type == K_SYS_PART_BCM1480)
+		    soc_str = "BCM1480";
+		else if (part_type == K_SYS_PART_BCM1280)
+		    soc_str = "BCM1280";
+		else
+		    soc_str = "BCM1x80";
+		ret = setup_bcm1x80_bcm1x55();
+		break;
+
+	    case K_SYS_SOC_TYPE_BCM1x55:
+		if (part_type == K_SYS_PART_BCM1455)
+		    soc_str = "BCM1455";
+		else if (part_type == K_SYS_PART_BCM1255)
+		    soc_str = "BCM1255";
+		else
+		    soc_str = "BCM1x55";
+		ret = setup_bcm1x80_bcm1x55();
+		break;
+
+	    default:
+		prom_printf("Unknown part type %x\n", part_type);
+		ret = 1;
+		break;
+	}
+	return ret;
+}
+
+static inline int setup_bcm1x80_bcm1x55(void)
+{
+	int ret = 0;
+
+	switch (soc_pass) {
+	    case K_SYS_REVISION_BCM1480_S0:
+		periph_rev = 1;
+		pass_str = "S0 (pass1)";
+		break;
+	    case K_SYS_REVISION_BCM1480_A1:
+		periph_rev = 1;
+		pass_str = "A1 (pass1)";
+		break;
+	    case K_SYS_REVISION_BCM1480_A2:
+		periph_rev = 1;
+		pass_str = "A2 (pass1)";
+		break;
+	    case K_SYS_REVISION_BCM1480_A3:
+		periph_rev = 1;
+		pass_str = "A3 (pass1)";
+		break;
+	    case K_SYS_REVISION_BCM1480_B0:
+		periph_rev = 1;
+		pass_str = "B0 (pass2)";
+		break;
+	    default:
+		prom_printf("Unknown %s rev %x\n", soc_str, soc_pass);
+		periph_rev = 1;
+		pass_str = "Unknown Revision";
+		break;
+	}
+	return ret;
+}
+
+void bcm1480_setup(void)
+{
+	uint64_t sys_rev;
+	int plldiv;
+
+	sb1_pass = read_c0_prid() & 0xff;
+	sys_rev = __raw_readq(IOADDR(A_SCD_SYSTEM_REVISION));
+	soc_type = SYS_SOC_TYPE(sys_rev);
+	part_type = G_SYS_PART(sys_rev);
+	soc_pass = G_SYS_REVISION(sys_rev);
+
+	if (sys_rev_decode()) {
+		prom_printf("Restart after failure to identify SiByte chip\n");
+		machine_restart(NULL);
+	}
+
+	plldiv = G_BCM1480_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG)));
+	zbbus_mhz = ((plldiv >> 1) * 50) + ((plldiv & 1) * 25);
+
+	prom_printf("Broadcom SiByte %s %s @ %d MHz (SB-1A rev %d)\n",
+		    soc_str, pass_str, zbbus_mhz * 2, sb1_pass);
+	prom_printf("Board type: %s\n", get_system_type());
+}
diff --git a/arch/mips/sibyte/bcm1480/smp.c b/arch/mips/sibyte/bcm1480/smp.c
new file mode 100644
index 000000000000..584a4b33faac
--- /dev/null
+++ b/arch/mips/sibyte/bcm1480/smp.c
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2001,2002,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/smp.h>
+#include <linux/kernel_stat.h>
+
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+
+extern void smp_call_function_interrupt(void);
+
+/*
+ * These are routines for dealing with the bcm1480 smp capabilities
+ * independent of board/firmware
+ */
+
+static void *mailbox_0_set_regs[] = {
+	IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
+	IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
+	IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
+	IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
+};
+
+static void *mailbox_0_clear_regs[] = {
+	IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
+	IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
+	IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
+	IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
+};
+
+static void *mailbox_0_regs[] = {
+	IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
+	IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
+	IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
+	IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
+};
+
+/*
+ * SMP init and finish on secondary CPUs
+ */
+void bcm1480_smp_init(void)
+{
+	unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 |
+		STATUSF_IP1 | STATUSF_IP0;
+
+	/* Set interrupt mask, but don't enable */
+	change_c0_status(ST0_IM, imask);
+}
+
+void bcm1480_smp_finish(void)
+{
+	extern void bcm1480_time_init(void);
+	bcm1480_time_init();
+	local_irq_enable();
+}
+
+/*
+ * These are routines for dealing with the sb1250 smp capabilities
+ * independent of board/firmware
+ */
+
+/*
+ * Simple enough; everything is set up, so just poke the appropriate mailbox
+ * register, and we should be set
+ */
+void core_send_ipi(int cpu, unsigned int action)
+{
+	__raw_writeq((((u64)action)<< 48), mailbox_0_set_regs[cpu]);
+}
+
+void bcm1480_mailbox_interrupt(struct pt_regs *regs)
+{
+	int cpu = smp_processor_id();
+	unsigned int action;
+
+	kstat_this_cpu.irqs[K_BCM1480_INT_MBOX_0_0]++;
+	/* Load the mailbox register to figure out what we're supposed to do */
+	action = (__raw_readq(mailbox_0_regs[cpu]) >> 48) & 0xffff;
+
+	/* Clear the mailbox to clear the interrupt */
+	__raw_writeq(((u64)action)<<48, mailbox_0_clear_regs[cpu]);
+
+	/*
+	 * Nothing to do for SMP_RESCHEDULE_YOURSELF; returning from the
+	 * interrupt will do the reschedule for us
+	 */
+
+	if (action & SMP_CALL_FUNCTION)
+		smp_call_function_interrupt();
+}
diff --git a/arch/mips/sibyte/bcm1480/time.c b/arch/mips/sibyte/bcm1480/time.c
new file mode 100644
index 000000000000..e545752695a1
--- /dev/null
+++ b/arch/mips/sibyte/bcm1480/time.c
@@ -0,0 +1,138 @@
+/*
+ * Copyright (C) 2000,2001,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+/*
+ * These are routines to set up and handle interrupts from the
+ * bcm1480 general purpose timer 0.  We're using the timer as a
+ * system clock, so we set it up to run at 100 Hz.  On every
+ * interrupt, we update our idea of what the time of day is,
+ * then call do_timer() in the architecture-independent kernel
+ * code to do general bookkeeping (e.g. update jiffies, run
+ * bottom halves, etc.)
+ */
+#include <linux/config.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/kernel_stat.h>
+
+#include <asm/irq.h>
+#include <asm/ptrace.h>
+#include <asm/addrspace.h>
+#include <asm/time.h>
+#include <asm/io.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+#include <asm/sibyte/bcm1480_scd.h>
+
+#include <asm/sibyte/sb1250.h>
+
+
+#define IMR_IP2_VAL	K_BCM1480_INT_MAP_I0
+#define IMR_IP3_VAL	K_BCM1480_INT_MAP_I1
+#define IMR_IP4_VAL	K_BCM1480_INT_MAP_I2
+
+extern int bcm1480_steal_irq(int irq);
+
+void bcm1480_time_init(void)
+{
+	int cpu = smp_processor_id();
+	int irq = K_BCM1480_INT_TIMER_0+cpu;
+
+	/* Only have 4 general purpose timers */
+	if (cpu > 3) {
+		BUG();
+	}
+
+	if (!cpu) {
+		/* Use our own gettimeoffset() routine */
+		do_gettimeoffset = bcm1480_gettimeoffset;
+	}
+
+	bcm1480_mask_irq(cpu, irq);
+
+	/* Map the timer interrupt to ip[4] of this cpu */
+	__raw_writeq(IMR_IP4_VAL, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H)
+	      + (irq<<3)));
+
+	/* the general purpose timer ticks at 1 Mhz independent of the rest of the system */
+	/* Disable the timer and set up the count */
+	__raw_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+	__raw_writeq(
+#ifndef CONFIG_SIMULATION
+		1000000/HZ
+#else
+		50000/HZ
+#endif
+		, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
+
+	/* Set the timer running */
+	__raw_writeq(M_SCD_TIMER_ENABLE|M_SCD_TIMER_MODE_CONTINUOUS,
+	      IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+
+	bcm1480_unmask_irq(cpu, irq);
+	bcm1480_steal_irq(irq);
+	/*
+	 * This interrupt is "special" in that it doesn't use the request_irq
+	 * way to hook the irq line.  The timer interrupt is initialized early
+	 * enough to make this a major pain, and it's also firing enough to
+	 * warrant a bit of special case code.  bcm1480_timer_interrupt is
+	 * called directly from irq_handler.S when IP[4] is set during an
+	 * interrupt
+	 */
+}
+
+#include <asm/sibyte/sb1250.h>
+
+void bcm1480_timer_interrupt(struct pt_regs *regs)
+{
+	int cpu = smp_processor_id();
+	int irq = K_BCM1480_INT_TIMER_0+cpu;
+
+	/* Reset the timer */
+	__raw_writeq(M_SCD_TIMER_ENABLE|M_SCD_TIMER_MODE_CONTINUOUS,
+	      IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+
+	/*
+	 * CPU 0 handles the global timer interrupt job
+	 */
+	if (cpu == 0) {
+		ll_timer_interrupt(irq, regs);
+	}
+
+	/*
+	 * every CPU should do profiling and process accouting
+	 */
+	ll_local_timer_interrupt(irq, regs);
+}
+
+/*
+ * We use our own do_gettimeoffset() instead of the generic one,
+ * because the generic one does not work for SMP case.
+ * In addition, since we use general timer 0 for system time,
+ * we can get accurate intra-jiffy offset without calibration.
+ */
+unsigned long bcm1480_gettimeoffset(void)
+{
+	unsigned long count =
+		__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(0, R_SCD_TIMER_CNT)));
+
+	return 1000000/HZ - count;
+}
diff --git a/arch/mips/sibyte/cfe/smp.c b/arch/mips/sibyte/cfe/smp.c
index e44ce1a9eea9..e8485124b8fc 100644
--- a/arch/mips/sibyte/cfe/smp.c
+++ b/arch/mips/sibyte/cfe/smp.c
@@ -70,8 +70,15 @@ void prom_boot_secondary(int cpu, struct task_struct *idle)
  */
 void prom_init_secondary(void)
 {
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+	extern void bcm1480_smp_init(void);
+	bcm1480_smp_init();
+#elif defined(CONFIG_SIBYTE_SB1250)
 	extern void sb1250_smp_init(void);
 	sb1250_smp_init();
+#else
+#error invalid SMP configuration
+#endif
 }
 
 /*
@@ -80,8 +87,15 @@ void prom_init_secondary(void)
  */
 void prom_smp_finish(void)
 {
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+	extern void bcm1480_smp_finish(void);
+	bcm1480_smp_finish();
+#elif defined(CONFIG_SIBYTE_SB1250)
 	extern void sb1250_smp_finish(void);
 	sb1250_smp_finish();
+#else
+#error invalid SMP configuration
+#endif
 }
 
 /*
diff --git a/arch/mips/sibyte/sb1250/bcm1250_tbprof.c b/arch/mips/sibyte/sb1250/bcm1250_tbprof.c
index 7f813ae9eaff..992e0d8dbb67 100644
--- a/arch/mips/sibyte/sb1250/bcm1250_tbprof.c
+++ b/arch/mips/sibyte/sb1250/bcm1250_tbprof.c
@@ -28,6 +28,8 @@
 #include <linux/fs.h>
 #include <linux/errno.h>
 #include <linux/reboot.h>
+#include <linux/smp_lock.h>
+#include <linux/wait.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/sibyte/sb1250.h>
@@ -64,24 +66,25 @@ static void arm_tb(void)
 	u_int64_t tb_options = M_SCD_TRACE_CFG_FREEZE_FULL;
 	/* Generate an SCD_PERFCNT interrupt in TB_PERIOD Zclks to
 	   trigger start of trace.  XXX vary sampling period */
-	bus_writeq(0, IOADDR(A_SCD_PERF_CNT_1));
-	scdperfcnt = bus_readq(IOADDR(A_SCD_PERF_CNT_CFG));
+	__raw_writeq(0, IOADDR(A_SCD_PERF_CNT_1));
+	scdperfcnt = __raw_readq(IOADDR(A_SCD_PERF_CNT_CFG));
 	/* Unfortunately, in Pass 2 we must clear all counters to knock down
 	   a previous interrupt request.  This means that bus profiling
 	   requires ALL of the SCD perf counters. */
-	bus_writeq((scdperfcnt & ~M_SPC_CFG_SRC1) | // keep counters 0,2,3 as is
-		   M_SPC_CFG_ENABLE |		 // enable counting
-		   M_SPC_CFG_CLEAR |		 // clear all counters
-		   V_SPC_CFG_SRC1(1),		 // counter 1 counts cycles
-		   IOADDR(A_SCD_PERF_CNT_CFG));
-	bus_writeq(next, IOADDR(A_SCD_PERF_CNT_1));
+	__raw_writeq((scdperfcnt & ~M_SPC_CFG_SRC1) |
+						// keep counters 0,2,3 as is
+		     M_SPC_CFG_ENABLE |		// enable counting
+		     M_SPC_CFG_CLEAR |		// clear all counters
+		     V_SPC_CFG_SRC1(1),		// counter 1 counts cycles
+		     IOADDR(A_SCD_PERF_CNT_CFG));
+	__raw_writeq(next, IOADDR(A_SCD_PERF_CNT_1));
 	/* Reset the trace buffer */
-	bus_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
+	__raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
 #if 0 && defined(M_SCD_TRACE_CFG_FORCECNT)
 	/* XXXKW may want to expose control to the data-collector */
 	tb_options |= M_SCD_TRACE_CFG_FORCECNT;
 #endif
-	bus_writeq(tb_options, IOADDR(A_SCD_TRACE_CFG));
+	__raw_writeq(tb_options, IOADDR(A_SCD_TRACE_CFG));
 	sbp.tb_armed = 1;
 }
 
@@ -93,23 +96,30 @@ static irqreturn_t sbprof_tb_intr(int irq, void *dev_id, struct pt_regs *regs)
 		/* XXX should use XKPHYS to make writes bypass L2 */
 		u_int64_t *p = sbp.sbprof_tbbuf[sbp.next_tb_sample++];
 		/* Read out trace */
-		bus_writeq(M_SCD_TRACE_CFG_START_READ, IOADDR(A_SCD_TRACE_CFG));
+		__raw_writeq(M_SCD_TRACE_CFG_START_READ,
+			     IOADDR(A_SCD_TRACE_CFG));
 		__asm__ __volatile__ ("sync" : : : "memory");
 		/* Loop runs backwards because bundles are read out in reverse order */
 		for (i = 256 * 6; i > 0; i -= 6) {
 			// Subscripts decrease to put bundle in the order
 			//   t0 lo, t0 hi, t1 lo, t1 hi, t2 lo, t2 hi
-			p[i-1] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t2 hi
-			p[i-2] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t2 lo
-			p[i-3] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t1 hi
-			p[i-4] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t1 lo
-			p[i-5] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t0 hi
-			p[i-6] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t0 lo
+			p[i - 1] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+								// read t2 hi
+			p[i - 2] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+								// read t2 lo
+			p[i - 3] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+								// read t1 hi
+			p[i - 4] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+								// read t1 lo
+			p[i - 5] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+								// read t0 hi
+			p[i - 6] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+								// read t0 lo
 		}
 		if (!sbp.tb_enable) {
 			DBG(printk(DEVNAME ": tb_intr shutdown\n"));
-			bus_writeq(M_SCD_TRACE_CFG_RESET,
-				   IOADDR(A_SCD_TRACE_CFG));
+			__raw_writeq(M_SCD_TRACE_CFG_RESET,
+				     IOADDR(A_SCD_TRACE_CFG));
 			sbp.tb_armed = 0;
 			wake_up(&sbp.tb_sync);
 		} else {
@@ -118,7 +128,7 @@ static irqreturn_t sbprof_tb_intr(int irq, void *dev_id, struct pt_regs *regs)
 	} else {
 		/* No more trace buffer samples */
 		DBG(printk(DEVNAME ": tb_intr full\n"));
-		bus_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
+		__raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
 		sbp.tb_armed = 0;
 		if (!sbp.tb_enable) {
 			wake_up(&sbp.tb_sync);
@@ -152,13 +162,11 @@ int sbprof_zbprof_start(struct file *filp)
 		return -EBUSY;
 	}
 	/* Make sure there isn't a perf-cnt interrupt waiting */
-	scdperfcnt = bus_readq(IOADDR(A_SCD_PERF_CNT_CFG));
+	scdperfcnt = __raw_readq(IOADDR(A_SCD_PERF_CNT_CFG));
 	/* Disable and clear counters, override SRC_1 */
-	bus_writeq((scdperfcnt & ~(M_SPC_CFG_SRC1 | M_SPC_CFG_ENABLE)) |
-		   M_SPC_CFG_ENABLE |
-		   M_SPC_CFG_CLEAR |
-		   V_SPC_CFG_SRC1(1),
-		   IOADDR(A_SCD_PERF_CNT_CFG));
+	__raw_writeq((scdperfcnt & ~(M_SPC_CFG_SRC1 | M_SPC_CFG_ENABLE)) |
+		     M_SPC_CFG_ENABLE | M_SPC_CFG_CLEAR | V_SPC_CFG_SRC1(1),
+		     IOADDR(A_SCD_PERF_CNT_CFG));
 
 	/* We grab this interrupt to prevent others from trying to use
            it, even though we don't want to service the interrupts
@@ -172,55 +180,55 @@ int sbprof_zbprof_start(struct file *filp)
 	/* I need the core to mask these, but the interrupt mapper to
 	   pass them through.  I am exploiting my knowledge that
 	   cp0_status masks out IP[5]. krw */
-	bus_writeq(K_INT_MAP_I3,
-		   IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
-			  (K_INT_PERF_CNT << 3)));
+	__raw_writeq(K_INT_MAP_I3,
+		     IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
+			    (K_INT_PERF_CNT << 3)));
 
 	/* Initialize address traps */
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_UP_0));
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_UP_1));
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_UP_2));
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_UP_3));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_0));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_1));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_2));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_3));
 
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_0));
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_1));
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_2));
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_3));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_0));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_1));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_2));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_3));
 
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_CFG_0));
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_CFG_1));
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_CFG_2));
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_CFG_3));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_0));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_1));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_2));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_3));
 
 	/* Initialize Trace Event 0-7 */
 	//				when interrupt
-	bus_writeq(M_SCD_TREVT_INTERRUPT, IOADDR(A_SCD_TRACE_EVENT_0));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_1));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_2));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_3));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_4));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_5));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_6));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_7));
+	__raw_writeq(M_SCD_TREVT_INTERRUPT, IOADDR(A_SCD_TRACE_EVENT_0));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_1));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_2));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_3));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_4));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_5));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_6));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_7));
 
 	/* Initialize Trace Sequence 0-7 */
 	//				     Start on event 0 (interrupt)
-	bus_writeq(V_SCD_TRSEQ_FUNC_START | 0x0fff,
-		   IOADDR(A_SCD_TRACE_SEQUENCE_0));
+	__raw_writeq(V_SCD_TRSEQ_FUNC_START | 0x0fff,
+		     IOADDR(A_SCD_TRACE_SEQUENCE_0));
 	//			  dsamp when d used | asamp when a used
-	bus_writeq(M_SCD_TRSEQ_ASAMPLE | M_SCD_TRSEQ_DSAMPLE |
-		   K_SCD_TRSEQ_TRIGGER_ALL,
-		   IOADDR(A_SCD_TRACE_SEQUENCE_1));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_2));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_3));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_4));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_5));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_6));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_7));
+	__raw_writeq(M_SCD_TRSEQ_ASAMPLE | M_SCD_TRSEQ_DSAMPLE |
+		     K_SCD_TRSEQ_TRIGGER_ALL,
+		     IOADDR(A_SCD_TRACE_SEQUENCE_1));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_2));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_3));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_4));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_5));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_6));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_7));
 
 	/* Now indicate the PERF_CNT interrupt as a trace-relevant interrupt */
-	bus_writeq((1ULL << K_INT_PERF_CNT),
-		   IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_TRACE)));
+	__raw_writeq(1ULL << K_INT_PERF_CNT,
+		     IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_TRACE)));
 
 	arm_tb();
 
@@ -231,6 +239,7 @@ int sbprof_zbprof_start(struct file *filp)
 
 int sbprof_zbprof_stop(void)
 {
+	DEFINE_WAIT(wait);
 	DBG(printk(DEVNAME ": stopping\n"));
 
 	if (sbp.tb_enable) {
@@ -240,7 +249,9 @@ int sbprof_zbprof_stop(void)
 		   this sleep happens. */
 		if (sbp.tb_armed) {
 			DBG(printk(DEVNAME ": wait for disarm\n"));
-			interruptible_sleep_on(&sbp.tb_sync);
+			prepare_to_wait(&sbp.tb_sync, &wait, TASK_INTERRUPTIBLE);
+			schedule();
+			finish_wait(&sbp.tb_sync, &wait);
 			DBG(printk(DEVNAME ": disarm complete\n"));
 		}
 		free_irq(K_INT_TRACE_FREEZE, &sbp);
@@ -333,13 +344,13 @@ static ssize_t sbprof_tb_read(struct file *filp, char *buf,
 	return count;
 }
 
-static int sbprof_tb_ioctl(struct inode *inode,
-			   struct file *filp,
-			   unsigned int command,
-			   unsigned long arg)
+static long sbprof_tb_ioctl(struct file *filp,
+			    unsigned int command,
+			    unsigned long arg)
 {
 	int error = 0;
 
+	lock_kernel();
 	switch (command) {
 	case SBPROF_ZBSTART:
 		error = sbprof_zbprof_start(filp);
@@ -348,13 +359,17 @@ static int sbprof_tb_ioctl(struct inode *inode,
 		error = sbprof_zbprof_stop();
 		break;
 	case SBPROF_ZBWAITFULL:
-		interruptible_sleep_on(&sbp.tb_read);
+		DEFINE_WAIT(wait);
+		prepare_to_wait(&sbp.tb_read, &wait, TASK_INTERRUPTIBLE);
+		schedule();
+		finish_wait(&sbp.tb_read, &wait);
 		/* XXXKW check if interrupted? */
 		return put_user(TB_FULL, (int *) arg);
 	default:
 		error = -EINVAL;
 		break;
 	}
+	unlock_kernel();
 
 	return error;
 }
@@ -364,7 +379,8 @@ static struct file_operations sbprof_tb_fops = {
 	.open		= sbprof_tb_open,
 	.release	= sbprof_tb_release,
 	.read		= sbprof_tb_read,
-	.ioctl		= sbprof_tb_ioctl,
+	.unlocked_ioctl	= sbprof_tb_ioctl,
+	.compat_ioctl	= sbprof_tb_ioctl,
 	.mmap		= NULL,
 };
 
diff --git a/arch/mips/sibyte/sb1250/bus_watcher.c b/arch/mips/sibyte/sb1250/bus_watcher.c
index 1a97e3127aeb..482dee054e68 100644
--- a/arch/mips/sibyte/sb1250/bus_watcher.c
+++ b/arch/mips/sibyte/sb1250/bus_watcher.c
@@ -189,7 +189,7 @@ static irqreturn_t sibyte_bw_int(int irq, void *data, struct pt_regs *regs)
 
 	for (i=0; i<256*6; i++)
 		printk("%016llx\n",
-		       (unsigned long long)bus_readq(IOADDR(A_SCD_TRACE_READ)));
+		       (long long)__raw_readq(IOADDR(A_SCD_TRACE_READ)));
 
 	csr_out32(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
 	csr_out32(M_SCD_TRACE_CFG_START, IOADDR(A_SCD_TRACE_CFG));
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
index 2725b263cced..589537bfcc3d 100644
--- a/arch/mips/sibyte/sb1250/irq.c
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -53,7 +53,7 @@ static void disable_sb1250_irq(unsigned int irq);
 static unsigned int startup_sb1250_irq(unsigned int irq);
 static void ack_sb1250_irq(unsigned int irq);
 #ifdef CONFIG_SMP
-static void sb1250_set_affinity(unsigned int irq, unsigned long mask);
+static void sb1250_set_affinity(unsigned int irq, cpumask_t mask);
 #endif
 
 #ifdef CONFIG_SIBYTE_HAS_LDT
@@ -71,17 +71,15 @@ extern char sb1250_duart_present[];
 #endif
 
 static struct hw_interrupt_type sb1250_irq_type = {
-	"SB1250-IMR",
-	startup_sb1250_irq,
-	shutdown_sb1250_irq,
-	enable_sb1250_irq,
-	disable_sb1250_irq,
-	ack_sb1250_irq,
-	end_sb1250_irq,
+	.typename = "SB1250-IMR",
+	.startup = startup_sb1250_irq,
+	.shutdown = shutdown_sb1250_irq,
+	.enable = enable_sb1250_irq,
+	.disable = disable_sb1250_irq,
+	.ack = ack_sb1250_irq,
+	.end = end_sb1250_irq,
 #ifdef CONFIG_SMP
-	sb1250_set_affinity
-#else
-	NULL
+	.set_affinity = sb1250_set_affinity
 #endif
 };
 
@@ -96,11 +94,11 @@ void sb1250_mask_irq(int cpu, int irq)
 	u64 cur_ints;
 
 	spin_lock_irqsave(&sb1250_imr_lock, flags);
-	cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(cpu) +
-				      R_IMR_INTERRUPT_MASK));
+	cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
+					R_IMR_INTERRUPT_MASK));
 	cur_ints |= (((u64) 1) << irq);
-	__bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
-				      R_IMR_INTERRUPT_MASK));
+	____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
+					R_IMR_INTERRUPT_MASK));
 	spin_unlock_irqrestore(&sb1250_imr_lock, flags);
 }
 
@@ -110,32 +108,25 @@ void sb1250_unmask_irq(int cpu, int irq)
 	u64 cur_ints;
 
 	spin_lock_irqsave(&sb1250_imr_lock, flags);
-	cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(cpu) +
-				      R_IMR_INTERRUPT_MASK));
+	cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
+					R_IMR_INTERRUPT_MASK));
 	cur_ints &= ~(((u64) 1) << irq);
-	__bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
-				      R_IMR_INTERRUPT_MASK));
+	____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
+					R_IMR_INTERRUPT_MASK));
 	spin_unlock_irqrestore(&sb1250_imr_lock, flags);
 }
 
 #ifdef CONFIG_SMP
-static void sb1250_set_affinity(unsigned int irq, unsigned long mask)
+static void sb1250_set_affinity(unsigned int irq, cpumask_t mask)
 {
 	int i = 0, old_cpu, cpu, int_on;
 	u64 cur_ints;
 	irq_desc_t *desc = irq_desc + irq;
 	unsigned long flags;
 
-	while (mask) {
-		if (mask & 1) {
-			mask >>= 1;
-			break;
-		}
-		mask >>= 1;
-		i++;
-	}
+	i = first_cpu(mask);
 
-	if (mask) {
+	if (cpus_weight(mask) > 1) {
 		printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
 		return;
 	}
@@ -149,23 +140,23 @@ static void sb1250_set_affinity(unsigned int irq, unsigned long mask)
 
 	/* Swizzle each CPU's IMR (but leave the IP selection alone) */
 	old_cpu = sb1250_irq_owner[irq];
-	cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(old_cpu) +
-			       R_IMR_INTERRUPT_MASK));
+	cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(old_cpu) +
+					R_IMR_INTERRUPT_MASK));
 	int_on = !(cur_ints & (((u64) 1) << irq));
 	if (int_on) {
 		/* If it was on, mask it */
 		cur_ints |= (((u64) 1) << irq);
-		__bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(old_cpu) +
-					      R_IMR_INTERRUPT_MASK));
+		____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(old_cpu) +
+					R_IMR_INTERRUPT_MASK));
 	}
 	sb1250_irq_owner[irq] = cpu;
 	if (int_on) {
 		/* unmask for the new CPU */
-		cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(cpu) +
-				       R_IMR_INTERRUPT_MASK));
+		cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
+					R_IMR_INTERRUPT_MASK));
 		cur_ints &= ~(((u64) 1) << irq);
-		__bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
-					      R_IMR_INTERRUPT_MASK));
+		____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
+					R_IMR_INTERRUPT_MASK));
 	}
 	spin_unlock(&sb1250_imr_lock);
 	spin_unlock_irqrestore(&desc->lock, flags);
@@ -208,8 +199,8 @@ static void ack_sb1250_irq(unsigned int irq)
 	 * deliver the interrupts to all CPUs (which makes affinity
 	 * changing easier for us)
 	 */
-	pending = bus_readq(IOADDR(A_IMR_REGISTER(sb1250_irq_owner[irq],
-						  R_IMR_LDT_INTERRUPT)));
+	pending = __raw_readq(IOADDR(A_IMR_REGISTER(sb1250_irq_owner[irq],
+						    R_IMR_LDT_INTERRUPT)));
 	pending &= ((u64)1 << (irq));
 	if (pending) {
 		int i;
@@ -224,8 +215,8 @@ static void ack_sb1250_irq(unsigned int irq)
 			 * Clear for all CPUs so an affinity switch
 			 * doesn't find an old status
 			 */
-			bus_writeq(pending,
-				   IOADDR(A_IMR_REGISTER(cpu,
+			__raw_writeq(pending,
+				     IOADDR(A_IMR_REGISTER(cpu,
 						R_IMR_LDT_INTERRUPT_CLR)));
 		}
 
@@ -340,12 +331,14 @@ void __init arch_init_irq(void)
 
 	/* Default everything to IP2 */
 	for (i = 0; i < SB1250_NR_IRQS; i++) {	/* was I0 */
-		bus_writeq(IMR_IP2_VAL,
-			   IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
-				  (i << 3)));
-		bus_writeq(IMR_IP2_VAL,
-			   IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) +
-				  (i << 3)));
+		__raw_writeq(IMR_IP2_VAL,
+			     IOADDR(A_IMR_REGISTER(0,
+						   R_IMR_INTERRUPT_MAP_BASE) +
+				    (i << 3)));
+		__raw_writeq(IMR_IP2_VAL,
+			     IOADDR(A_IMR_REGISTER(1,
+						   R_IMR_INTERRUPT_MAP_BASE) +
+				    (i << 3)));
 	}
 
 	init_sb1250_irqs();
@@ -355,23 +348,23 @@ void __init arch_init_irq(void)
 	 * inter-cpu messages
 	 */
 	/* Was I1 */
-	bus_writeq(IMR_IP3_VAL,
-		   IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
-			  (K_INT_MBOX_0 << 3)));
-	bus_writeq(IMR_IP3_VAL,
-		   IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) +
-			  (K_INT_MBOX_0 << 3)));
+	__raw_writeq(IMR_IP3_VAL,
+		     IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
+			    (K_INT_MBOX_0 << 3)));
+	__raw_writeq(IMR_IP3_VAL,
+		     IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) +
+			    (K_INT_MBOX_0 << 3)));
 
 	/* Clear the mailboxes.  The firmware may leave them dirty */
-	bus_writeq(0xffffffffffffffffULL,
-		   IOADDR(A_IMR_REGISTER(0, R_IMR_MAILBOX_CLR_CPU)));
-	bus_writeq(0xffffffffffffffffULL,
-		   IOADDR(A_IMR_REGISTER(1, R_IMR_MAILBOX_CLR_CPU)));
+	__raw_writeq(0xffffffffffffffffULL,
+		     IOADDR(A_IMR_REGISTER(0, R_IMR_MAILBOX_CLR_CPU)));
+	__raw_writeq(0xffffffffffffffffULL,
+		     IOADDR(A_IMR_REGISTER(1, R_IMR_MAILBOX_CLR_CPU)));
 
 	/* Mask everything except the mailbox registers for both cpus */
 	tmp = ~((u64) 0) ^ (((u64) 1) << K_INT_MBOX_0);
-	bus_writeq(tmp, IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MASK)));
-	bus_writeq(tmp, IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MASK)));
+	__raw_writeq(tmp, IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MASK)));
+	__raw_writeq(tmp, IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MASK)));
 
 	sb1250_steal_irq(K_INT_MBOX_0);
 
@@ -396,12 +389,14 @@ void __init arch_init_irq(void)
 		sb1250_duart_present[kgdb_port] = 0;
 #endif
 		/* Setup uart 1 settings, mapper */
-		bus_writeq(M_DUART_IMR_BRK, IOADDR(A_DUART_IMRREG(kgdb_port)));
+		__raw_writeq(M_DUART_IMR_BRK,
+			     IOADDR(A_DUART_IMRREG(kgdb_port)));
 
 		sb1250_steal_irq(kgdb_irq);
-		bus_writeq(IMR_IP6_VAL,
-			   IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
-				  (kgdb_irq<<3)));
+		__raw_writeq(IMR_IP6_VAL,
+			     IOADDR(A_IMR_REGISTER(0,
+						   R_IMR_INTERRUPT_MAP_BASE) +
+				    (kgdb_irq << 3)));
 		sb1250_unmask_irq(0, kgdb_irq);
 	}
 #endif
diff --git a/arch/mips/sibyte/sb1250/setup.c b/arch/mips/sibyte/sb1250/setup.c
index f8c605be96c7..df2e266c700c 100644
--- a/arch/mips/sibyte/sb1250/setup.c
+++ b/arch/mips/sibyte/sb1250/setup.c
@@ -153,7 +153,7 @@ void sb1250_setup(void)
 	int bad_config = 0;
 
 	sb1_pass = read_c0_prid() & 0xff;
-	sys_rev = bus_readq(IOADDR(A_SCD_SYSTEM_REVISION));
+	sys_rev = __raw_readq(IOADDR(A_SCD_SYSTEM_REVISION));
 	soc_type = SYS_SOC_TYPE(sys_rev);
 	soc_pass = G_SYS_REVISION(sys_rev);
 
@@ -162,7 +162,7 @@ void sb1250_setup(void)
 		machine_restart(NULL);
 	}
 
-	plldiv = G_SYS_PLL_DIV(bus_readq(IOADDR(A_SCD_SYSTEM_CFG)));
+	plldiv = G_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG)));
 	zbbus_mhz = ((plldiv >> 1) * 50) + ((plldiv & 1) * 25);
 
 	prom_printf("Broadcom SiByte %s %s @ %d MHz (SB1 rev %d)\n",
diff --git a/arch/mips/sibyte/sb1250/smp.c b/arch/mips/sibyte/sb1250/smp.c
index be91b3990952..f859db02d3c9 100644
--- a/arch/mips/sibyte/sb1250/smp.c
+++ b/arch/mips/sibyte/sb1250/smp.c
@@ -29,18 +29,18 @@
 #include <asm/sibyte/sb1250_int.h>
 
 static void *mailbox_set_regs[] = {
-	(void *)IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_SET_CPU),
-	(void *)IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_SET_CPU)
+	IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_SET_CPU),
+	IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_SET_CPU)
 };
 
 static void *mailbox_clear_regs[] = {
-	(void *)IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CLR_CPU),
-	(void *)IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CLR_CPU)
+	IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CLR_CPU),
+	IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CLR_CPU)
 };
 
 static void *mailbox_regs[] = {
-	(void *)IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CPU),
-	(void *)IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CPU)
+	IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CPU),
+	IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CPU)
 };
 
 /*
@@ -73,7 +73,7 @@ void sb1250_smp_finish(void)
  */
 void core_send_ipi(int cpu, unsigned int action)
 {
-	bus_writeq((((u64)action) << 48), mailbox_set_regs[cpu]);
+	__raw_writeq((((u64)action) << 48), mailbox_set_regs[cpu]);
 }
 
 void sb1250_mailbox_interrupt(struct pt_regs *regs)
@@ -83,10 +83,10 @@ void sb1250_mailbox_interrupt(struct pt_regs *regs)
 
 	kstat_this_cpu.irqs[K_INT_MBOX_0]++;
 	/* Load the mailbox register to figure out what we're supposed to do */
-	action = (__bus_readq(mailbox_regs[cpu]) >> 48) & 0xffff;
+	action = (____raw_readq(mailbox_regs[cpu]) >> 48) & 0xffff;
 
 	/* Clear the mailbox to clear the interrupt */
-	__bus_writeq(((u64)action) << 48, mailbox_clear_regs[cpu]);
+	____raw_writeq(((u64)action) << 48, mailbox_clear_regs[cpu]);
 
 	/*
 	 * Nothing to do for SMP_RESCHEDULE_YOURSELF; returning from the
diff --git a/arch/mips/sibyte/sb1250/time.c b/arch/mips/sibyte/sb1250/time.c
index 8b4c848c907b..511c89d65f38 100644
--- a/arch/mips/sibyte/sb1250/time.c
+++ b/arch/mips/sibyte/sb1250/time.c
@@ -67,24 +67,24 @@ void sb1250_time_init(void)
 	sb1250_mask_irq(cpu, irq);
 
 	/* Map the timer interrupt to ip[4] of this cpu */
-	bus_writeq(IMR_IP4_VAL,
-		   IOADDR(A_IMR_REGISTER(cpu, R_IMR_INTERRUPT_MAP_BASE) +
-			  (irq << 3)));
+	__raw_writeq(IMR_IP4_VAL,
+		     IOADDR(A_IMR_REGISTER(cpu, R_IMR_INTERRUPT_MAP_BASE) +
+			    (irq << 3)));
 
 	/* the general purpose timer ticks at 1 Mhz independent if the rest of the system */
 	/* Disable the timer and set up the count */
-	bus_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+	__raw_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
 #ifdef CONFIG_SIMULATION
-	bus_writeq(50000 / HZ,
-		   IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
+	__raw_writeq(50000 / HZ,
+		     IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
 #else
-	bus_writeq(1000000/HZ,
-		   IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
+	__raw_writeq(1000000 / HZ,
+		     IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
 #endif
 
 	/* Set the timer running */
-	bus_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
-		   IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+	__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
+		     IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
 
 	sb1250_unmask_irq(cpu, irq);
 	sb1250_steal_irq(irq);
@@ -100,25 +100,25 @@ void sb1250_time_init(void)
 
 void sb1250_timer_interrupt(struct pt_regs *regs)
 {
-	extern asmlinkage void ll_local_timer_interrupt(int irq, struct pt_regs *regs);
 	int cpu = smp_processor_id();
 	int irq = K_INT_TIMER_0 + cpu;
 
 	/* Reset the timer */
-	__bus_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
-		     IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+	____raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
+		       IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
 
-	/*
-	 * CPU 0 handles the global timer interrupt job
-	 */
 	if (cpu == 0) {
+		/*
+		 * CPU 0 handles the global timer interrupt job
+		 */
 		ll_timer_interrupt(irq, regs);
 	}
-
-	/*
-	 * every CPU should do profiling and process accouting
-	 */
-	ll_local_timer_interrupt(irq, regs);
+	else {
+		/*
+		 * other CPUs should just do profiling and process accounting
+		 */
+		ll_local_timer_interrupt(irq, regs);
+	}
 }
 
 /*
@@ -130,7 +130,7 @@ void sb1250_timer_interrupt(struct pt_regs *regs)
 unsigned long sb1250_gettimeoffset(void)
 {
 	unsigned long count =
-		bus_readq(IOADDR(A_SCD_TIMER_REGISTER(0, R_SCD_TIMER_CNT)));
+		__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(0, R_SCD_TIMER_CNT)));
 
 	return 1000000/HZ - count;
  }
diff --git a/arch/mips/sibyte/swarm/rtc_m41t81.c b/arch/mips/sibyte/swarm/rtc_m41t81.c
index a686bb716ec6..c13914bdda59 100644
--- a/arch/mips/sibyte/swarm/rtc_m41t81.c
+++ b/arch/mips/sibyte/swarm/rtc_m41t81.c
@@ -82,59 +82,60 @@
 #define M41T81REG_SQW	0x13		/* square wave register */
 
 #define M41T81_CCR_ADDRESS	0x68
-#define SMB_CSR(reg) ((u8 *) (IOADDR(A_SMB_REGISTER(1, reg))))
+
+#define SMB_CSR(reg)	IOADDR(A_SMB_REGISTER(1, reg))
 
 static int m41t81_read(uint8_t addr)
 {
-	while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+	while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
 		;
 
-	bus_writeq(addr & 0xff, SMB_CSR(R_SMB_CMD));
-	bus_writeq((V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR1BYTE),
-		   SMB_CSR(R_SMB_START));
+	__raw_writeq(addr & 0xff, SMB_CSR(R_SMB_CMD));
+	__raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR1BYTE,
+		     SMB_CSR(R_SMB_START));
 
-	while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+	while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
 		;
 
-	bus_writeq((V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE),
-		   SMB_CSR(R_SMB_START));
+	__raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE,
+		     SMB_CSR(R_SMB_START));
 
-	while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+	while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
 		;
 
-	if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+	if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
 		/* Clear error bit by writing a 1 */
-		bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+		__raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
 		return -1;
 	}
 
-	return (bus_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
+	return (__raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
 }
 
 static int m41t81_write(uint8_t addr, int b)
 {
-	while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+	while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
 		;
 
-	bus_writeq((addr & 0xFF), SMB_CSR(R_SMB_CMD));
-	bus_writeq((b & 0xff), SMB_CSR(R_SMB_DATA));
-	bus_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR2BYTE,
-		   SMB_CSR(R_SMB_START));
+	__raw_writeq(addr & 0xff, SMB_CSR(R_SMB_CMD));
+	__raw_writeq(b & 0xff, SMB_CSR(R_SMB_DATA));
+	__raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR2BYTE,
+		     SMB_CSR(R_SMB_START));
 
-	while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+	while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
 		;
 
-	if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+	if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
 		/* Clear error bit by writing a 1 */
-		bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+		__raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
 		return -1;
 	}
 
 	/* read the same byte again to make sure it is written */
-	bus_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE,
-		   SMB_CSR(R_SMB_START));
+	__raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE,
+		     SMB_CSR(R_SMB_START));
 
-	while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+	while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
 		;
 
 	return 0;
@@ -143,6 +144,7 @@ static int m41t81_write(uint8_t addr, int b)
 int m41t81_set_time(unsigned long t)
 {
 	struct rtc_time tm;
+	unsigned long flags;
 
 	to_tm(t, &tm);
 
@@ -152,6 +154,7 @@ int m41t81_set_time(unsigned long t)
 	 * believe we should finish writing min within a second.
 	 */
 
+	spin_lock_irqsave(&rtc_lock, flags);
 	tm.tm_sec = BIN2BCD(tm.tm_sec);
 	m41t81_write(M41T81REG_SC, tm.tm_sec);
 
@@ -179,6 +182,7 @@ int m41t81_set_time(unsigned long t)
 	tm.tm_year %= 100;
 	tm.tm_year = BIN2BCD(tm.tm_year);
 	m41t81_write(M41T81REG_YR, tm.tm_year);
+	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	return 0;
 }
@@ -186,19 +190,23 @@ int m41t81_set_time(unsigned long t)
 unsigned long m41t81_get_time(void)
 {
 	unsigned int year, mon, day, hour, min, sec;
+	unsigned long flags;
 
 	/*
 	 * min is valid if two reads of sec are the same.
 	 */
 	for (;;) {
+		spin_lock_irqsave(&rtc_lock, flags);
 		sec = m41t81_read(M41T81REG_SC);
 		min = m41t81_read(M41T81REG_MN);
 		if (sec == m41t81_read(M41T81REG_SC)) break;
+		spin_unlock_irqrestore(&rtc_lock, flags);
 	}
 	hour = m41t81_read(M41T81REG_HR) & 0x3f;
 	day = m41t81_read(M41T81REG_DT);
 	mon = m41t81_read(M41T81REG_MO);
 	year = m41t81_read(M41T81REG_YR);
+	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	sec = BCD2BIN(sec);
 	min = BCD2BIN(min);
diff --git a/arch/mips/sibyte/swarm/rtc_xicor1241.c b/arch/mips/sibyte/swarm/rtc_xicor1241.c
index 981d21f16e64..f4a178836415 100644
--- a/arch/mips/sibyte/swarm/rtc_xicor1241.c
+++ b/arch/mips/sibyte/swarm/rtc_xicor1241.c
@@ -57,52 +57,52 @@
 
 #define X1241_CCR_ADDRESS	0x6F
 
-#define SMB_CSR(reg) ((u8 *) (IOADDR(A_SMB_REGISTER(1, reg))))
+#define SMB_CSR(reg)	IOADDR(A_SMB_REGISTER(1, reg))
 
 static int xicor_read(uint8_t addr)
 {
-        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
                 ;
 
-	bus_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD));
-	bus_writeq((addr & 0xff), SMB_CSR(R_SMB_DATA));
-	bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE),
-		   SMB_CSR(R_SMB_START));
+	__raw_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD));
+	__raw_writeq(addr & 0xff, SMB_CSR(R_SMB_DATA));
+	__raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE,
+		     SMB_CSR(R_SMB_START));
 
-        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
                 ;
 
-	bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE),
-		   SMB_CSR(R_SMB_START));
+	__raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE,
+		     SMB_CSR(R_SMB_START));
 
-        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
                 ;
 
-        if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+        if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
                 /* Clear error bit by writing a 1 */
-                bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+                __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
                 return -1;
         }
 
-	return (bus_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
+	return (__raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
 }
 
 static int xicor_write(uint8_t addr, int b)
 {
-        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
                 ;
 
-	bus_writeq(addr, SMB_CSR(R_SMB_CMD));
-	bus_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA));
-	bus_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE,
-		   SMB_CSR(R_SMB_START));
+	__raw_writeq(addr, SMB_CSR(R_SMB_CMD));
+	__raw_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA));
+	__raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE,
+		     SMB_CSR(R_SMB_START));
 
-        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
                 ;
 
-        if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+        if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
                 /* Clear error bit by writing a 1 */
-                bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+                __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
                 return -1;
         } else {
 		return 0;
@@ -113,9 +113,11 @@ int xicor_set_time(unsigned long t)
 {
 	struct rtc_time tm;
 	int tmp;
+	unsigned long flags;
 
 	to_tm(t, &tm);
 
+	spin_lock_irqsave(&rtc_lock, flags);
 	/* unlock writes to the CCR */
 	xicor_write(X1241REG_SR, X1241REG_SR_WEL);
 	xicor_write(X1241REG_SR, X1241REG_SR_WEL | X1241REG_SR_RWEL);
@@ -160,6 +162,7 @@ int xicor_set_time(unsigned long t)
 	xicor_write(X1241REG_HR, tmp);
 
 	xicor_write(X1241REG_SR, 0);
+	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	return 0;
 }
@@ -167,7 +170,9 @@ int xicor_set_time(unsigned long t)
 unsigned long xicor_get_time(void)
 {
 	unsigned int year, mon, day, hour, min, sec, y2k;
+	unsigned long flags;
 
+	spin_lock_irqsave(&rtc_lock, flags);
 	sec = xicor_read(X1241REG_SC);
 	min = xicor_read(X1241REG_MN);
 	hour = xicor_read(X1241REG_HR);
@@ -183,6 +188,7 @@ unsigned long xicor_get_time(void)
 	mon = xicor_read(X1241REG_MO);
 	year = xicor_read(X1241REG_YR);
 	y2k = xicor_read(X1241REG_Y2K);
+	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	sec = BCD2BIN(sec);
 	min = BCD2BIN(min);
diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c
index 4daeaa413def..b614ca0ddb69 100644
--- a/arch/mips/sibyte/swarm/setup.c
+++ b/arch/mips/sibyte/swarm/setup.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
+ * Copyright (C) 2000, 2001, 2002, 2003, 2004 Broadcom Corporation
  * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
  *
  * This program is free software; you can redistribute it and/or
@@ -39,11 +39,23 @@
 #include <asm/time.h>
 #include <asm/traps.h>
 #include <asm/sibyte/sb1250.h>
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#include <asm/sibyte/bcm1480_regs.h>
+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
 #include <asm/sibyte/sb1250_regs.h>
+#else
+#error invalid SiByte board configuation
+#endif
 #include <asm/sibyte/sb1250_genbus.h>
 #include <asm/sibyte/board.h>
 
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+extern void bcm1480_setup(void);
+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
 extern void sb1250_setup(void);
+#else
+#error invalid SiByte board configuation
+#endif
 
 extern int xicor_probe(void);
 extern int xicor_set_time(unsigned long);
@@ -66,27 +78,34 @@ void __init swarm_timer_setup(struct irqaction *irq)
          */
 
         /* We only need to setup the generic timer */
-        sb1250_time_init();
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+	bcm1480_time_init();
+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
+	sb1250_time_init();
+#else
+#error invalid SiByte board configuation
+#endif
 }
 
 int swarm_be_handler(struct pt_regs *regs, int is_fixup)
 {
 	if (!is_fixup && (regs->cp0_cause & 4)) {
 		/* Data bus error - print PA */
-#ifdef CONFIG_64BIT
-		printk("DBE physical address: %010lx\n",
+		printk("DBE physical address: %010Lx\n",
 		       __read_64bit_c0_register($26, 1));
-#else
-		printk("DBE physical address: %010llx\n",
-		       __read_64bit_c0_split($26, 1));
-#endif
 	}
 	return (is_fixup ? MIPS_BE_FIXUP : MIPS_BE_FATAL);
 }
 
-static int __init swarm_setup(void)
+void __init plat_setup(void)
 {
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+	bcm1480_setup();
+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
 	sb1250_setup();
+#else
+#error invalid SiByte board configuation
+#endif
 
 	panic_timeout = 5;  /* For debug.  */
 
@@ -133,12 +152,8 @@ static int __init swarm_setup(void)
        };
        /* XXXKW for CFE, get lines/cols from environment */
 #endif
-
-	return 0;
 }
 
-early_initcall(swarm_setup);
-
 #ifdef LEDS_PHYS
 
 #ifdef CONFIG_SIBYTE_CARMEL
diff --git a/arch/mips/sibyte/swarm/time.c b/arch/mips/sibyte/swarm/time.c
index c1f1a9defeeb..97c73c793c35 100644
--- a/arch/mips/sibyte/swarm/time.c
+++ b/arch/mips/sibyte/swarm/time.c
@@ -79,48 +79,48 @@ static unsigned int usec_bias = 0;
 
 static int xicor_read(uint8_t addr)
 {
-        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
                 ;
 
-	bus_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD));
-	bus_writeq((addr & 0xff), SMB_CSR(R_SMB_DATA));
-	bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE),
-		   SMB_CSR(R_SMB_START));
+	__raw_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD));
+	__raw_writeq(addr & 0xff, SMB_CSR(R_SMB_DATA));
+	__raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE,
+		     SMB_CSR(R_SMB_START));
 
-        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
                 ;
 
-	bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE),
-		   SMB_CSR(R_SMB_START));
+	__raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE,
+		     SMB_CSR(R_SMB_START));
 
-        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
                 ;
 
-        if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+        if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
                 /* Clear error bit by writing a 1 */
-                bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+                __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
                 return -1;
         }
 
-	return (bus_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
+	return (__raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
 }
 
 static int xicor_write(uint8_t addr, int b)
 {
-        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
                 ;
 
-	bus_writeq(addr, SMB_CSR(R_SMB_CMD));
-	bus_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA));
-	bus_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE,
-		   SMB_CSR(R_SMB_START));
+	__raw_writeq(addr, SMB_CSR(R_SMB_CMD));
+	__raw_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA));
+	__raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE,
+		     SMB_CSR(R_SMB_START));
 
-        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
                 ;
 
-        if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+        if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
                 /* Clear error bit by writing a 1 */
-                bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+                __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
                 return -1;
         } else {
 		return 0;
@@ -228,8 +228,8 @@ void __init swarm_time_init(void)
 	/* Establish communication with the Xicor 1241 RTC */
 	/* XXXKW how do I share the SMBus with the I2C subsystem? */
 
-	bus_writeq(K_SMB_FREQ_400KHZ, SMB_CSR(R_SMB_FREQ));
-	bus_writeq(0, SMB_CSR(R_SMB_CONTROL));
+	__raw_writeq(K_SMB_FREQ_400KHZ, SMB_CSR(R_SMB_FREQ));
+	__raw_writeq(0, SMB_CSR(R_SMB_CONTROL));
 
 	if ((status = xicor_read(X1241REG_SR_RTCF)) < 0) {
 		printk("x1241: couldn't detect on SWARM SMBus 1\n");
diff --git a/arch/mips/sni/irq.c b/arch/mips/sni/irq.c
index 141a310d74d8..952038aa4b90 100644
--- a/arch/mips/sni/irq.c
+++ b/arch/mips/sni/irq.c
@@ -58,14 +58,13 @@ static void end_pciasic_irq(unsigned int irq)
 }
 
 static struct hw_interrupt_type pciasic_irq_type = {
-	"ASIC-PCI",
-	startup_pciasic_irq,
-	shutdown_pciasic_irq,
-	enable_pciasic_irq,
-	disable_pciasic_irq,
-	mask_and_ack_pciasic_irq,
-	end_pciasic_irq,
-	NULL
+	.typename = "ASIC-PCI",
+	.startup = startup_pciasic_irq,
+	.shutdown = shutdown_pciasic_irq,
+	.enable = enable_pciasic_irq,
+	.disable = disable_pciasic_irq,
+	.ack = mask_and_ack_pciasic_irq,
+	.end = end_pciasic_irq,
 };
 
 /*
diff --git a/arch/mips/sni/setup.c b/arch/mips/sni/setup.c
index 1b3f8a0903e1..262c85680709 100644
--- a/arch/mips/sni/setup.c
+++ b/arch/mips/sni/setup.c
@@ -167,7 +167,7 @@ static inline void sni_pcimt_time_init(void)
 	rtc_set_time = mc146818_set_rtc_mmss;
 }
 
-static int __init sni_rm200_pci_setup(void)
+void __init plat_setup(void)
 {
 	sni_pcimt_detect();
 	sni_pcimt_sc_init();
@@ -196,8 +196,4 @@ static int __init sni_rm200_pci_setup(void)
 #ifdef CONFIG_PCI
 	register_pci_controller(&sni_controller);
 #endif
-
-	return 0;
 }
-
-early_initcall(sni_rm200_pci_setup);
diff --git a/arch/mips/tx4927/Kconfig b/arch/mips/tx4927/Kconfig
new file mode 100644
index 000000000000..5fbbe12e0fc1
--- /dev/null
+++ b/arch/mips/tx4927/Kconfig
@@ -0,0 +1,3 @@
+config TOSHIBA_FPCIB0
+	bool "FPCIB0 Backplane Support"
+	depends on TOSHIBA_RBTX4927
diff --git a/arch/mips/tx4927/common/tx4927_setup.c b/arch/mips/tx4927/common/tx4927_setup.c
index 26d7c53612a8..77c3b66fb959 100644
--- a/arch/mips/tx4927/common/tx4927_setup.c
+++ b/arch/mips/tx4927/common/tx4927_setup.c
@@ -64,7 +64,7 @@ static void tx4927_write_buffer_flush(void)
 }
 
 
-static void __init tx4927_setup(void)
+void __init plat_setup(void)
 {
 	board_time_init = tx4927_time_init;
 	board_timer_setup = tx4927_timer_setup;
@@ -76,12 +76,8 @@ static void __init tx4927_setup(void)
 		toshiba_rbtx4927_setup();
 	}
 #endif
-
-	return;
 }
 
-early_initcall(tx4927_setup);
-
 void __init tx4927_time_init(void)
 {
 
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
index fc0720599fd9..990fcb294bab 100644
--- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
+++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
@@ -77,6 +77,11 @@
 #include <linux/hdreg.h>
 #include <linux/ide.h>
 #endif
+#ifdef CONFIG_SERIAL_TXX9
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#endif
 
 #undef TOSHIBA_RBTX4927_SETUP_DEBUG
 
@@ -920,12 +925,30 @@ void __init toshiba_rbtx4927_setup(void)
 
 #endif /* CONFIG_PCI */
 
+#ifdef CONFIG_SERIAL_TXX9
+	{
+		extern int early_serial_txx9_setup(struct uart_port *port);
+		int i;
+		struct uart_port req;
+		for(i = 0; i < 2; i++) {
+			memset(&req, 0, sizeof(req));
+			req.line = i;
+			req.iotype = UPIO_MEM;
+			req.membase = (char *)(0xff1ff300 + i * 0x100);
+			req.mapbase = 0xff1ff300 + i * 0x100;
+			req.irq = 32 + i;
+			req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
+			req.uartclk = 50000000;
+			early_serial_txx9_setup(&req);
+		}
+	}
 #ifdef CONFIG_SERIAL_TXX9_CONSOLE
         argptr = prom_getcmdline();
         if (strstr(argptr, "console=") == NULL) {
                 strcat(argptr, " console=ttyS0,38400");
         }
 #endif
+#endif
 
 #ifdef CONFIG_ROOT_NFS
         argptr = prom_getcmdline();
diff --git a/arch/mips/tx4938/Kconfig b/arch/mips/tx4938/Kconfig
new file mode 100644
index 000000000000..d90e9cd85138
--- /dev/null
+++ b/arch/mips/tx4938/Kconfig
@@ -0,0 +1,24 @@
+if TOSHIBA_RBTX4938
+
+comment "Multiplex Pin Select"
+choice
+	prompt "PIO[58:61]"
+	default TOSHIBA_RBTX4938_MPLEX_PIO58_61
+
+config TOSHIBA_RBTX4938_MPLEX_PIO58_61
+	bool "PIO"
+config TOSHIBA_RBTX4938_MPLEX_NAND
+	bool "NAND"
+config TOSHIBA_RBTX4938_MPLEX_ATA
+	bool "ATA"
+
+endchoice
+
+config TX4938_NAND_BOOT
+	depends on EXPERIMENTAL && TOSHIBA_RBTX4938_MPLEX_NAND
+	bool "NAND Boot Support (EXPERIMENTAL)"
+	help
+	  This is only for Toshiba RBTX4938 reference board, which has NAND IPL.
+	  Select this option if you need to use NAND boot.
+
+endif
diff --git a/arch/mips/tx4938/common/Makefile b/arch/mips/tx4938/common/Makefile
new file mode 100644
index 000000000000..74c95c5bcdbf
--- /dev/null
+++ b/arch/mips/tx4938/common/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for common code for Toshiba TX4927 based systems
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+#
+
+obj-y	+= prom.o setup.o irq.o irq_handler.o rtc_rx5c348.o
+obj-$(CONFIG_KGDB) += dbgio.o
+
diff --git a/arch/mips/tx4938/common/dbgio.c b/arch/mips/tx4938/common/dbgio.c
new file mode 100644
index 000000000000..bea59ff1842a
--- /dev/null
+++ b/arch/mips/tx4938/common/dbgio.c
@@ -0,0 +1,50 @@
+/*
+ * linux/arch/mips/tx4938/common/dbgio.c
+ *
+ * kgdb interface for gdb
+ *
+ * Author: MontaVista Software, Inc.
+ *         source@mvista.com
+ *
+ * Copyright 2005 MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation; either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Support for TX4938 in 2.6 - Hiroshi DOYU <Hiroshi_DOYU@montavista.co.jp>
+ */
+
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+#include <asm/tx4938/tx4938_mips.h>
+
+extern u8 txx9_sio_kdbg_rd(void);
+extern int txx9_sio_kdbg_wr( u8 ch );
+
+u8 getDebugChar(void)
+{
+	return (txx9_sio_kdbg_rd());
+}
+
+int putDebugChar(u8 byte)
+{
+	return (txx9_sio_kdbg_wr(byte));
+}
+
diff --git a/arch/mips/tx4938/common/irq.c b/arch/mips/tx4938/common/irq.c
new file mode 100644
index 000000000000..4f90d7faf634
--- /dev/null
+++ b/arch/mips/tx4938/common/irq.c
@@ -0,0 +1,424 @@
+/*
+ * linux/arch/mps/tx4938/common/irq.c
+ *
+ * Common tx4938 irq handler
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/irq.h>
+#include <asm/bitops.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+#include <asm/tx4938/rbtx4938.h>
+
+/**********************************************************************************/
+/* Forwad definitions for all pic's                                               */
+/**********************************************************************************/
+
+static unsigned int tx4938_irq_cp0_startup(unsigned int irq);
+static void tx4938_irq_cp0_shutdown(unsigned int irq);
+static void tx4938_irq_cp0_enable(unsigned int irq);
+static void tx4938_irq_cp0_disable(unsigned int irq);
+static void tx4938_irq_cp0_mask_and_ack(unsigned int irq);
+static void tx4938_irq_cp0_end(unsigned int irq);
+
+static unsigned int tx4938_irq_pic_startup(unsigned int irq);
+static void tx4938_irq_pic_shutdown(unsigned int irq);
+static void tx4938_irq_pic_enable(unsigned int irq);
+static void tx4938_irq_pic_disable(unsigned int irq);
+static void tx4938_irq_pic_mask_and_ack(unsigned int irq);
+static void tx4938_irq_pic_end(unsigned int irq);
+
+/**********************************************************************************/
+/* Kernel structs for all pic's                                                   */
+/**********************************************************************************/
+DEFINE_SPINLOCK(tx4938_cp0_lock);
+DEFINE_SPINLOCK(tx4938_pic_lock);
+
+#define TX4938_CP0_NAME "TX4938-CP0"
+static struct hw_interrupt_type tx4938_irq_cp0_type = {
+	.typename = TX4938_CP0_NAME,
+	.startup = tx4938_irq_cp0_startup,
+	.shutdown = tx4938_irq_cp0_shutdown,
+	.enable = tx4938_irq_cp0_enable,
+	.disable = tx4938_irq_cp0_disable,
+	.ack = tx4938_irq_cp0_mask_and_ack,
+	.end = tx4938_irq_cp0_end,
+	.set_affinity = NULL
+};
+
+#define TX4938_PIC_NAME "TX4938-PIC"
+static struct hw_interrupt_type tx4938_irq_pic_type = {
+	.typename = TX4938_PIC_NAME,
+	.startup = tx4938_irq_pic_startup,
+	.shutdown = tx4938_irq_pic_shutdown,
+	.enable = tx4938_irq_pic_enable,
+	.disable = tx4938_irq_pic_disable,
+	.ack = tx4938_irq_pic_mask_and_ack,
+	.end = tx4938_irq_pic_end,
+	.set_affinity = NULL
+};
+
+static struct irqaction tx4938_irq_pic_action = {
+	.handler = no_action,
+	.flags = 0,
+	.mask = CPU_MASK_NONE,
+	.name = TX4938_PIC_NAME
+};
+
+/**********************************************************************************/
+/* Functions for cp0                                                              */
+/**********************************************************************************/
+
+#define tx4938_irq_cp0_mask(irq) ( 1 << ( irq-TX4938_IRQ_CP0_BEG+8 ) )
+
+static void __init
+tx4938_irq_cp0_init(void)
+{
+	int i;
+
+	for (i = TX4938_IRQ_CP0_BEG; i <= TX4938_IRQ_CP0_END; i++) {
+		irq_desc[i].status = IRQ_DISABLED;
+		irq_desc[i].action = 0;
+		irq_desc[i].depth = 1;
+		irq_desc[i].handler = &tx4938_irq_cp0_type;
+	}
+
+	return;
+}
+
+static unsigned int
+tx4938_irq_cp0_startup(unsigned int irq)
+{
+	tx4938_irq_cp0_enable(irq);
+
+	return (0);
+}
+
+static void
+tx4938_irq_cp0_shutdown(unsigned int irq)
+{
+	tx4938_irq_cp0_disable(irq);
+}
+
+static void
+tx4938_irq_cp0_enable(unsigned int irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&tx4938_cp0_lock, flags);
+
+	set_c0_status(tx4938_irq_cp0_mask(irq));
+
+	spin_unlock_irqrestore(&tx4938_cp0_lock, flags);
+}
+
+static void
+tx4938_irq_cp0_disable(unsigned int irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&tx4938_cp0_lock, flags);
+
+	clear_c0_status(tx4938_irq_cp0_mask(irq));
+
+	spin_unlock_irqrestore(&tx4938_cp0_lock, flags);
+
+	return;
+}
+
+static void
+tx4938_irq_cp0_mask_and_ack(unsigned int irq)
+{
+	tx4938_irq_cp0_disable(irq);
+
+	return;
+}
+
+static void
+tx4938_irq_cp0_end(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
+		tx4938_irq_cp0_enable(irq);
+	}
+
+	return;
+}
+
+/**********************************************************************************/
+/* Functions for pic                                                              */
+/**********************************************************************************/
+
+u32
+tx4938_irq_pic_addr(int irq)
+{
+	/* MVMCP -- need to formulize this */
+	irq -= TX4938_IRQ_PIC_BEG;
+
+	switch (irq) {
+	case 17:
+	case 16:
+	case 1:
+	case 0:{
+			return (TX4938_MKA(TX4938_IRC_IRLVL0));
+		}
+	case 19:
+	case 18:
+	case 3:
+	case 2:{
+			return (TX4938_MKA(TX4938_IRC_IRLVL1));
+		}
+	case 21:
+	case 20:
+	case 5:
+	case 4:{
+			return (TX4938_MKA(TX4938_IRC_IRLVL2));
+		}
+	case 23:
+	case 22:
+	case 7:
+	case 6:{
+			return (TX4938_MKA(TX4938_IRC_IRLVL3));
+		}
+	case 25:
+	case 24:
+	case 9:
+	case 8:{
+			return (TX4938_MKA(TX4938_IRC_IRLVL4));
+		}
+	case 27:
+	case 26:
+	case 11:
+	case 10:{
+			return (TX4938_MKA(TX4938_IRC_IRLVL5));
+		}
+	case 29:
+	case 28:
+	case 13:
+	case 12:{
+			return (TX4938_MKA(TX4938_IRC_IRLVL6));
+		}
+	case 31:
+	case 30:
+	case 15:
+	case 14:{
+			return (TX4938_MKA(TX4938_IRC_IRLVL7));
+		}
+	}
+
+	return (0);
+}
+
+u32
+tx4938_irq_pic_mask(int irq)
+{
+	/* MVMCP -- need to formulize this */
+	irq -= TX4938_IRQ_PIC_BEG;
+
+	switch (irq) {
+	case 31:
+	case 29:
+	case 27:
+	case 25:
+	case 23:
+	case 21:
+	case 19:
+	case 17:{
+			return (0x07000000);
+		}
+	case 30:
+	case 28:
+	case 26:
+	case 24:
+	case 22:
+	case 20:
+	case 18:
+	case 16:{
+			return (0x00070000);
+		}
+	case 15:
+	case 13:
+	case 11:
+	case 9:
+	case 7:
+	case 5:
+	case 3:
+	case 1:{
+			return (0x00000700);
+		}
+	case 14:
+	case 12:
+	case 10:
+	case 8:
+	case 6:
+	case 4:
+	case 2:
+	case 0:{
+			return (0x00000007);
+		}
+	}
+	return (0x00000000);
+}
+
+static void
+tx4938_irq_pic_modify(unsigned pic_reg, unsigned clr_bits, unsigned set_bits)
+{
+	unsigned long val = 0;
+
+	val = TX4938_RD(pic_reg);
+	val &= (~clr_bits);
+	val |= (set_bits);
+	TX4938_WR(pic_reg, val);
+	mmiowb();
+	TX4938_RD(pic_reg);
+
+	return;
+}
+
+static void __init
+tx4938_irq_pic_init(void)
+{
+	unsigned long flags;
+	int i;
+
+	for (i = TX4938_IRQ_PIC_BEG; i <= TX4938_IRQ_PIC_END; i++) {
+		irq_desc[i].status = IRQ_DISABLED;
+		irq_desc[i].action = 0;
+		irq_desc[i].depth = 2;
+		irq_desc[i].handler = &tx4938_irq_pic_type;
+	}
+
+	setup_irq(TX4938_IRQ_NEST_PIC_ON_CP0, &tx4938_irq_pic_action);
+
+	spin_lock_irqsave(&tx4938_pic_lock, flags);
+
+	TX4938_WR(0xff1ff640, 0x6);	/* irq level mask -- only accept hightest */
+	TX4938_WR(0xff1ff600, TX4938_RD(0xff1ff600) | 0x1);	/* irq enable */
+
+	spin_unlock_irqrestore(&tx4938_pic_lock, flags);
+
+	return;
+}
+
+static unsigned int
+tx4938_irq_pic_startup(unsigned int irq)
+{
+	tx4938_irq_pic_enable(irq);
+
+	return (0);
+}
+
+static void
+tx4938_irq_pic_shutdown(unsigned int irq)
+{
+	tx4938_irq_pic_disable(irq);
+
+	return;
+}
+
+static void
+tx4938_irq_pic_enable(unsigned int irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&tx4938_pic_lock, flags);
+
+	tx4938_irq_pic_modify(tx4938_irq_pic_addr(irq), 0,
+			      tx4938_irq_pic_mask(irq));
+
+	spin_unlock_irqrestore(&tx4938_pic_lock, flags);
+
+	return;
+}
+
+static void
+tx4938_irq_pic_disable(unsigned int irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&tx4938_pic_lock, flags);
+
+	tx4938_irq_pic_modify(tx4938_irq_pic_addr(irq),
+			      tx4938_irq_pic_mask(irq), 0);
+
+	spin_unlock_irqrestore(&tx4938_pic_lock, flags);
+
+	return;
+}
+
+static void
+tx4938_irq_pic_mask_and_ack(unsigned int irq)
+{
+	tx4938_irq_pic_disable(irq);
+
+	return;
+}
+
+static void
+tx4938_irq_pic_end(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
+		tx4938_irq_pic_enable(irq);
+	}
+
+	return;
+}
+
+/**********************************************************************************/
+/* Main init functions                                                            */
+/**********************************************************************************/
+
+void __init
+tx4938_irq_init(void)
+{
+	extern asmlinkage void tx4938_irq_handler(void);
+
+	tx4938_irq_cp0_init();
+	tx4938_irq_pic_init();
+	set_except_vector(0, tx4938_irq_handler);
+
+	return;
+}
+
+int
+tx4938_irq_nested(void)
+{
+	int sw_irq = 0;
+	u32 level2;
+
+	level2 = TX4938_RD(0xff1ff6a0);
+	if ((level2 & 0x10000) == 0) {
+		level2 &= 0x1f;
+		sw_irq = TX4938_IRQ_PIC_BEG + level2;
+		if (sw_irq == 26) {
+			{
+				extern int toshiba_rbtx4938_irq_nested(int sw_irq);
+				sw_irq = toshiba_rbtx4938_irq_nested(sw_irq);
+			}
+		}
+	}
+
+	wbflush();
+	return (sw_irq);
+}
diff --git a/arch/mips/tx4938/common/irq_handler.S b/arch/mips/tx4938/common/irq_handler.S
new file mode 100644
index 000000000000..1b2f72bac42d
--- /dev/null
+++ b/arch/mips/tx4938/common/irq_handler.S
@@ -0,0 +1,84 @@
+/*
+ * linux/arch/mips/tx4938/common/handler.S
+ *
+ * Primary interrupt handler for tx4938 based systems
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+#include <asm/tx4938/rbtx4938.h>
+
+
+		.align	5
+		NESTED(tx4938_irq_handler, PT_SIZE, sp)
+		SAVE_ALL
+		CLI
+		.set	at
+
+		mfc0	t0, CP0_CAUSE
+		mfc0	t1, CP0_STATUS
+		and	t0, t1
+
+		andi	t1, t0, STATUSF_IP7	/* cpu timer */
+		bnez	t1, ll_ip7
+
+		/* IP6..IP3 multiplexed -- do not use */
+
+		andi	t1, t0, STATUSF_IP2	/* tx4938 pic */
+		bnez	t1, ll_ip2
+
+		andi	t1, t0, STATUSF_IP1	/* user line 1 */
+		bnez	t1, ll_ip1
+
+		andi	t1, t0, STATUSF_IP0	/* user line 0 */
+		bnez	t1, ll_ip0
+
+		.set	reorder
+
+		nop
+		END(tx4938_irq_handler)
+
+		.align	5
+
+
+ll_ip7:
+		li	a0, TX4938_IRQ_CPU_TIMER
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+
+
+ll_ip2:
+		jal	tx4938_irq_nested
+		nop
+		beqz	v0, goto_spurious_interrupt
+		nop
+		move	a0, v0
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+
+goto_spurious_interrupt:
+		j	ret_from_irq
+
+ll_ip1:
+		li	a0, TX4938_IRQ_USER1
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+
+ll_ip0:
+		li	a0, TX4938_IRQ_USER0
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
diff --git a/arch/mips/tx4938/common/prom.c b/arch/mips/tx4938/common/prom.c
new file mode 100644
index 000000000000..3189a65f7d7e
--- /dev/null
+++ b/arch/mips/tx4938/common/prom.c
@@ -0,0 +1,129 @@
+/*
+ * linux/arch/mips/tx4938/common/prom.c
+ *
+ * common tx4938 memory interface
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <asm/tx4938/tx4938.h>
+
+static unsigned int __init
+tx4938_process_sdccr(u64 * addr)
+{
+	u64 val;
+	unsigned int sdccr_ce;
+	unsigned int sdccr_rs;
+	unsigned int sdccr_cs;
+	unsigned int sdccr_mw;
+	unsigned int rs = 0;
+	unsigned int cs = 0;
+	unsigned int mw = 0;
+	unsigned int bc = 4;
+	unsigned int msize = 0;
+
+	val = (*((vu64 *) (addr)));
+
+	/* MVMCP -- need #defs for these bits masks */
+	sdccr_ce = ((val & (1 << 10)) >> 10);
+	sdccr_rs = ((val & (3 << 5)) >> 5);
+	sdccr_cs = ((val & (7 << 2)) >> 2);
+	sdccr_mw = ((val & (1 << 0)) >> 0);
+
+	if (sdccr_ce) {
+		switch (sdccr_rs) {
+		case 0:{
+				rs = 2048;
+				break;
+			}
+		case 1:{
+				rs = 4096;
+				break;
+			}
+		case 2:{
+				rs = 8192;
+				break;
+			}
+		default:{
+				rs = 0;
+				break;
+			}
+		}
+		switch (sdccr_cs) {
+		case 0:{
+				cs = 256;
+				break;
+			}
+		case 1:{
+				cs = 512;
+				break;
+			}
+		case 2:{
+				cs = 1024;
+				break;
+			}
+		case 3:{
+				cs = 2048;
+				break;
+			}
+		case 4:{
+				cs = 4096;
+				break;
+			}
+		default:{
+				cs = 0;
+				break;
+			}
+		}
+		switch (sdccr_mw) {
+		case 0:{
+				mw = 8;
+				break;
+			}	/* 8 bytes = 64 bits */
+		case 1:{
+				mw = 4;
+				break;
+			}	/* 4 bytes = 32 bits */
+		}
+	}
+
+	/*           bytes per chip    MB per chip          bank count */
+	msize = (((rs * cs * mw) / (1024 * 1024)) * (bc));
+
+	/* MVMCP -- bc hard coded to 4 from table 9.3.1     */
+	/*          boad supports bc=2 but no way to detect */
+
+	return (msize);
+}
+
+unsigned int __init
+tx4938_get_mem_size(void)
+{
+	unsigned int c0;
+	unsigned int c1;
+	unsigned int c2;
+	unsigned int c3;
+	unsigned int total;
+
+	/* MVMCP -- need #defs for these registers */
+	c0 = tx4938_process_sdccr((u64 *) 0xff1f8000);
+	c1 = tx4938_process_sdccr((u64 *) 0xff1f8008);
+	c2 = tx4938_process_sdccr((u64 *) 0xff1f8010);
+	c3 = tx4938_process_sdccr((u64 *) 0xff1f8018);
+	total = c0 + c1 + c2 + c3;
+
+	return (total);
+}
diff --git a/arch/mips/tx4938/common/rtc_rx5c348.c b/arch/mips/tx4938/common/rtc_rx5c348.c
new file mode 100644
index 000000000000..d249edbb6af4
--- /dev/null
+++ b/arch/mips/tx4938/common/rtc_rx5c348.c
@@ -0,0 +1,202 @@
+/*
+ * RTC routines for RICOH Rx5C348 SPI chip.
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/rtc.h>
+#include <linux/time.h>
+#include <asm/time.h>
+#include <asm/tx4938/spi.h>
+
+#define	EPOCH		2000
+
+/* registers */
+#define Rx5C348_REG_SECOND	0
+#define Rx5C348_REG_MINUTE	1
+#define Rx5C348_REG_HOUR	2
+#define Rx5C348_REG_WEEK	3
+#define Rx5C348_REG_DAY	4
+#define Rx5C348_REG_MONTH	5
+#define Rx5C348_REG_YEAR	6
+#define Rx5C348_REG_ADJUST	7
+#define Rx5C348_REG_ALARM_W_MIN	8
+#define Rx5C348_REG_ALARM_W_HOUR	9
+#define Rx5C348_REG_ALARM_W_WEEK	10
+#define Rx5C348_REG_ALARM_D_MIN	11
+#define Rx5C348_REG_ALARM_D_HOUR	12
+#define Rx5C348_REG_CTL1	14
+#define Rx5C348_REG_CTL2	15
+
+/* register bits */
+#define Rx5C348_BIT_PM	0x20	/* REG_HOUR */
+#define Rx5C348_BIT_Y2K	0x80	/* REG_MONTH */
+#define Rx5C348_BIT_24H	0x20	/* REG_CTL1 */
+#define Rx5C348_BIT_XSTP	0x10	/* REG_CTL2 */
+
+/* commands */
+#define Rx5C348_CMD_W(addr)	(((addr) << 4) | 0x08)	/* single write */
+#define Rx5C348_CMD_R(addr)	(((addr) << 4) | 0x0c)	/* single read */
+#define Rx5C348_CMD_MW(addr)	(((addr) << 4) | 0x00)	/* burst write */
+#define Rx5C348_CMD_MR(addr)	(((addr) << 4) | 0x04)	/* burst read */
+
+static struct spi_dev_desc srtc_dev_desc = {
+	.baud 		= 1000000,	/* 1.0Mbps @ Vdd 2.0V */
+	.tcss		= 31,
+	.tcsh		= 1,
+	.tcsr		= 62,
+	/* 31us for Tcss (62us for Tcsr) is required for carry operation) */
+	.byteorder	= 1,		/* MSB-First */
+	.polarity	= 0,		/* High-Active */
+	.phase		= 1,		/* Shift-Then-Sample */
+
+};
+static int srtc_chipid;
+static int srtc_24h;
+
+static inline int
+spi_rtc_io(unsigned char *inbuf, unsigned char *outbuf, unsigned int count)
+{
+	unsigned char *inbufs[1], *outbufs[1];
+	unsigned int incounts[2], outcounts[2];
+	inbufs[0] = inbuf;
+	incounts[0] = count;
+	incounts[1] = 0;
+	outbufs[0] = outbuf;
+	outcounts[0] = count;
+	outcounts[1] = 0;
+	return txx9_spi_io(srtc_chipid, &srtc_dev_desc,
+			   inbufs, incounts, outbufs, outcounts, 0);
+}
+
+/*
+ * Conversion between binary and BCD.
+ */
+#ifndef BCD_TO_BIN
+#define BCD_TO_BIN(val) ((val)=((val)&15) + ((val)>>4)*10)
+#endif
+
+#ifndef BIN_TO_BCD
+#define BIN_TO_BCD(val) ((val)=(((val)/10)<<4) + (val)%10)
+#endif
+
+/* RTC-dependent code for time.c */
+
+static int
+rtc_rx5c348_set_time(unsigned long t)
+{
+	unsigned char inbuf[8];
+	struct rtc_time tm;
+	u8 year, month, day, hour, minute, second, century;
+
+	/* convert */
+	to_tm(t, &tm);
+
+	year = tm.tm_year % 100;
+	month = tm.tm_mon+1;	/* tm_mon starts from 0 to 11 */
+	day = tm.tm_mday;
+	hour = tm.tm_hour;
+	minute = tm.tm_min;
+	second = tm.tm_sec;
+	century = tm.tm_year / 100;
+
+	inbuf[0] = Rx5C348_CMD_MW(Rx5C348_REG_SECOND);
+	BIN_TO_BCD(second);
+	inbuf[1] = second;
+	BIN_TO_BCD(minute);
+	inbuf[2] = minute;
+
+	if (srtc_24h) {
+		BIN_TO_BCD(hour);
+		inbuf[3] = hour;
+	} else {
+		/* hour 0 is AM12, noon is PM12 */
+		inbuf[3] = 0;
+		if (hour >= 12)
+			inbuf[3] = Rx5C348_BIT_PM;
+		hour = (hour + 11) % 12 + 1;
+		BIN_TO_BCD(hour);
+		inbuf[3] |= hour;
+	}
+	inbuf[4] = 0;	/* ignore week */
+	BIN_TO_BCD(day);
+	inbuf[5] = day;
+	BIN_TO_BCD(month);
+	inbuf[6] = month;
+	if (century >= 20)
+		inbuf[6] |= Rx5C348_BIT_Y2K;
+	BIN_TO_BCD(year);
+	inbuf[7] = year;
+	/* write in one transfer to avoid data inconsistency */
+	return spi_rtc_io(inbuf, NULL, 8);
+}
+
+static unsigned long
+rtc_rx5c348_get_time(void)
+{
+	unsigned char inbuf[8], outbuf[8];
+	unsigned int year, month, day, hour, minute, second;
+
+	inbuf[0] = Rx5C348_CMD_MR(Rx5C348_REG_SECOND);
+	memset(inbuf + 1, 0, 7);
+	/* read in one transfer to avoid data inconsistency */
+	if (spi_rtc_io(inbuf, outbuf, 8))
+		return 0;
+	second = outbuf[1];
+	BCD_TO_BIN(second);
+	minute = outbuf[2];
+	BCD_TO_BIN(minute);
+	if (srtc_24h) {
+		hour = outbuf[3];
+		BCD_TO_BIN(hour);
+	} else {
+		hour = outbuf[3] & ~Rx5C348_BIT_PM;
+		BCD_TO_BIN(hour);
+		hour %= 12;
+		if (outbuf[3] & Rx5C348_BIT_PM)
+			hour += 12;
+	}
+	day = outbuf[5];
+	BCD_TO_BIN(day);
+	month = outbuf[6] & ~Rx5C348_BIT_Y2K;
+	BCD_TO_BIN(month);
+	year = outbuf[7];
+	BCD_TO_BIN(year);
+	year += EPOCH;
+
+	return mktime(year, month, day, hour, minute, second);
+}
+
+void __init
+rtc_rx5c348_init(int chipid)
+{
+	unsigned char inbuf[2], outbuf[2];
+	srtc_chipid = chipid;
+	/* turn on RTC if it is not on */
+	inbuf[0] = Rx5C348_CMD_R(Rx5C348_REG_CTL2);
+	inbuf[1] = 0;
+	spi_rtc_io(inbuf, outbuf, 2);
+	if (outbuf[1] & Rx5C348_BIT_XSTP) {
+		inbuf[0] = Rx5C348_CMD_W(Rx5C348_REG_CTL2);
+		inbuf[1] = 0;
+		spi_rtc_io(inbuf, NULL, 2);
+	}
+
+	inbuf[0] = Rx5C348_CMD_R(Rx5C348_REG_CTL1);
+	inbuf[1] = 0;
+	spi_rtc_io(inbuf, outbuf, 2);
+	if (outbuf[1] & Rx5C348_BIT_24H)
+		srtc_24h = 1;
+
+	/* set the function pointers */
+	rtc_get_time = rtc_rx5c348_get_time;
+	rtc_set_time = rtc_rx5c348_set_time;
+}
diff --git a/arch/mips/tx4938/common/setup.c b/arch/mips/tx4938/common/setup.c
new file mode 100644
index 000000000000..fc992953bf95
--- /dev/null
+++ b/arch/mips/tx4938/common/setup.c
@@ -0,0 +1,91 @@
+/*
+ * linux/arch/mips/tx4938/common/setup.c
+ *
+ * common tx4938 setup routines
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/irq.h>
+#include <asm/bitops.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/time.h>
+#include <asm/tx4938/rbtx4938.h>
+
+extern void toshiba_rbtx4938_setup(void);
+extern void rbtx4938_time_init(void);
+
+void __init tx4938_setup(void);
+void __init tx4938_time_init(void);
+void __init tx4938_timer_setup(struct irqaction *irq);
+void dump_cp0(char *key);
+
+void (*__wbflush) (void);
+
+static void
+tx4938_write_buffer_flush(void)
+{
+	mmiowb();
+
+	__asm__ __volatile__(
+		".set	push\n\t"
+		".set	noreorder\n\t"
+		"lw	$0,%0\n\t"
+		"nop\n\t"
+		".set	pop"
+		: /* no output */
+		: "m" (*(int *)KSEG1)
+		: "memory");
+}
+
+void __init
+plat_setup(void)
+{
+	board_time_init = tx4938_time_init;
+	board_timer_setup = tx4938_timer_setup;
+	__wbflush = tx4938_write_buffer_flush;
+	toshiba_rbtx4938_setup();
+}
+
+void __init
+tx4938_time_init(void)
+{
+	rbtx4938_time_init();
+}
+
+void __init
+tx4938_timer_setup(struct irqaction *irq)
+{
+	u32 count;
+	u32 c1;
+	u32 c2;
+
+	setup_irq(TX4938_IRQ_CPU_TIMER, irq);
+
+	c1 = read_c0_count();
+	count = c1 + (mips_hpt_frequency / HZ);
+	write_c0_compare(count);
+	c2 = read_c0_count();
+}
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/Makefile b/arch/mips/tx4938/toshiba_rbtx4938/Makefile
new file mode 100644
index 000000000000..226941279d75
--- /dev/null
+++ b/arch/mips/tx4938/toshiba_rbtx4938/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for common code for Toshiba TX4927 based systems
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+#
+
+obj-y	+= prom.o setup.o irq.o spi_eeprom.o spi_txx9.o
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/irq.c b/arch/mips/tx4938/toshiba_rbtx4938/irq.c
new file mode 100644
index 000000000000..9cd9c0fe2265
--- /dev/null
+++ b/arch/mips/tx4938/toshiba_rbtx4938/irq.c
@@ -0,0 +1,243 @@
+/*
+ * linux/arch/mips/tx4938/toshiba_rbtx4938/irq.c
+ *
+ * Toshiba RBTX4938 specific interrupt handlers
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+
+/*
+IRQ  Device
+
+16   TX4938-CP0/00 Software 0
+17   TX4938-CP0/01 Software 1
+18   TX4938-CP0/02 Cascade TX4938-CP0
+19   TX4938-CP0/03 Multiplexed -- do not use
+20   TX4938-CP0/04 Multiplexed -- do not use
+21   TX4938-CP0/05 Multiplexed -- do not use
+22   TX4938-CP0/06 Multiplexed -- do not use
+23   TX4938-CP0/07 CPU TIMER
+
+24   TX4938-PIC/00
+25   TX4938-PIC/01
+26   TX4938-PIC/02 Cascade RBTX4938-IOC
+27   TX4938-PIC/03 RBTX4938 RTL-8019AS Ethernet
+28   TX4938-PIC/04
+29   TX4938-PIC/05 TX4938 ETH1
+30   TX4938-PIC/06 TX4938 ETH0
+31   TX4938-PIC/07
+32   TX4938-PIC/08 TX4938 SIO 0
+33   TX4938-PIC/09 TX4938 SIO 1
+34   TX4938-PIC/10 TX4938 DMA0
+35   TX4938-PIC/11 TX4938 DMA1
+36   TX4938-PIC/12 TX4938 DMA2
+37   TX4938-PIC/13 TX4938 DMA3
+38   TX4938-PIC/14
+39   TX4938-PIC/15
+40   TX4938-PIC/16 TX4938 PCIC
+41   TX4938-PIC/17 TX4938 TMR0
+42   TX4938-PIC/18 TX4938 TMR1
+43   TX4938-PIC/19 TX4938 TMR2
+44   TX4938-PIC/20
+45   TX4938-PIC/21
+46   TX4938-PIC/22 TX4938 PCIERR
+47   TX4938-PIC/23
+48   TX4938-PIC/24
+49   TX4938-PIC/25
+50   TX4938-PIC/26
+51   TX4938-PIC/27
+52   TX4938-PIC/28
+53   TX4938-PIC/29
+54   TX4938-PIC/30
+55   TX4938-PIC/31 TX4938 SPI
+
+56 RBTX4938-IOC/00 PCI-D
+57 RBTX4938-IOC/01 PCI-C
+58 RBTX4938-IOC/02 PCI-B
+59 RBTX4938-IOC/03 PCI-A
+60 RBTX4938-IOC/04 RTC
+61 RBTX4938-IOC/05 ATA
+62 RBTX4938-IOC/06 MODEM
+63 RBTX4938-IOC/07 SWINT
+*/
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/timex.h>
+#include <asm/bootinfo.h>
+#include <asm/page.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <linux/bootmem.h>
+#include <asm/tx4938/rbtx4938.h>
+
+static unsigned int toshiba_rbtx4938_irq_ioc_startup(unsigned int irq);
+static void toshiba_rbtx4938_irq_ioc_shutdown(unsigned int irq);
+static void toshiba_rbtx4938_irq_ioc_enable(unsigned int irq);
+static void toshiba_rbtx4938_irq_ioc_disable(unsigned int irq);
+static void toshiba_rbtx4938_irq_ioc_mask_and_ack(unsigned int irq);
+static void toshiba_rbtx4938_irq_ioc_end(unsigned int irq);
+
+DEFINE_SPINLOCK(toshiba_rbtx4938_ioc_lock);
+
+#define TOSHIBA_RBTX4938_IOC_NAME "RBTX4938-IOC"
+static struct hw_interrupt_type toshiba_rbtx4938_irq_ioc_type = {
+	.typename = TOSHIBA_RBTX4938_IOC_NAME,
+	.startup = toshiba_rbtx4938_irq_ioc_startup,
+	.shutdown = toshiba_rbtx4938_irq_ioc_shutdown,
+	.enable = toshiba_rbtx4938_irq_ioc_enable,
+	.disable = toshiba_rbtx4938_irq_ioc_disable,
+	.ack = toshiba_rbtx4938_irq_ioc_mask_and_ack,
+	.end = toshiba_rbtx4938_irq_ioc_end,
+	.set_affinity = NULL
+};
+
+#define TOSHIBA_RBTX4938_IOC_INTR_ENAB 0xb7f02000
+#define TOSHIBA_RBTX4938_IOC_INTR_STAT 0xb7f0200a
+
+int
+toshiba_rbtx4938_irq_nested(int sw_irq)
+{
+	u8 level3;
+
+	level3 = reg_rd08(TOSHIBA_RBTX4938_IOC_INTR_STAT) & 0xff;
+	if (level3) {
+		/* must use fls so onboard ATA has priority */
+		sw_irq = TOSHIBA_RBTX4938_IRQ_IOC_BEG + fls(level3) - 1;
+	}
+
+	wbflush();
+	return sw_irq;
+}
+
+static struct irqaction toshiba_rbtx4938_irq_ioc_action = {
+	.handler = no_action,
+	.flags = 0,
+	.mask = CPU_MASK_NONE,
+	.name = TOSHIBA_RBTX4938_IOC_NAME,
+};
+
+/**********************************************************************************/
+/* Functions for ioc                                                              */
+/**********************************************************************************/
+static void __init
+toshiba_rbtx4938_irq_ioc_init(void)
+{
+	int i;
+
+	for (i = TOSHIBA_RBTX4938_IRQ_IOC_BEG;
+	     i <= TOSHIBA_RBTX4938_IRQ_IOC_END; i++) {
+		irq_desc[i].status = IRQ_DISABLED;
+		irq_desc[i].action = 0;
+		irq_desc[i].depth = 3;
+		irq_desc[i].handler = &toshiba_rbtx4938_irq_ioc_type;
+	}
+
+	setup_irq(RBTX4938_IRQ_IOCINT,
+		  &toshiba_rbtx4938_irq_ioc_action);
+}
+
+static unsigned int
+toshiba_rbtx4938_irq_ioc_startup(unsigned int irq)
+{
+	toshiba_rbtx4938_irq_ioc_enable(irq);
+
+	return 0;
+}
+
+static void
+toshiba_rbtx4938_irq_ioc_shutdown(unsigned int irq)
+{
+	toshiba_rbtx4938_irq_ioc_disable(irq);
+}
+
+static void
+toshiba_rbtx4938_irq_ioc_enable(unsigned int irq)
+{
+	unsigned long flags;
+	volatile unsigned char v;
+
+	spin_lock_irqsave(&toshiba_rbtx4938_ioc_lock, flags);
+
+	v = TX4938_RD08(TOSHIBA_RBTX4938_IOC_INTR_ENAB);
+	v |= (1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG));
+	TX4938_WR08(TOSHIBA_RBTX4938_IOC_INTR_ENAB, v);
+	mmiowb();
+	TX4938_RD08(TOSHIBA_RBTX4938_IOC_INTR_ENAB);
+
+	spin_unlock_irqrestore(&toshiba_rbtx4938_ioc_lock, flags);
+}
+
+static void
+toshiba_rbtx4938_irq_ioc_disable(unsigned int irq)
+{
+	unsigned long flags;
+	volatile unsigned char v;
+
+	spin_lock_irqsave(&toshiba_rbtx4938_ioc_lock, flags);
+
+	v = TX4938_RD08(TOSHIBA_RBTX4938_IOC_INTR_ENAB);
+	v &= ~(1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG));
+	TX4938_WR08(TOSHIBA_RBTX4938_IOC_INTR_ENAB, v);
+	mmiowb();
+	TX4938_RD08(TOSHIBA_RBTX4938_IOC_INTR_ENAB);
+
+	spin_unlock_irqrestore(&toshiba_rbtx4938_ioc_lock, flags);
+}
+
+static void
+toshiba_rbtx4938_irq_ioc_mask_and_ack(unsigned int irq)
+{
+	toshiba_rbtx4938_irq_ioc_disable(irq);
+}
+
+static void
+toshiba_rbtx4938_irq_ioc_end(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
+		toshiba_rbtx4938_irq_ioc_enable(irq);
+	}
+}
+
+extern void __init txx9_spi_irqinit(int irc_irq);
+
+void __init arch_init_irq(void)
+{
+	extern void tx4938_irq_init(void);
+
+	/* Now, interrupt control disabled, */
+	/* all IRC interrupts are masked, */
+	/* all IRC interrupt mode are Low Active. */
+
+	/* mask all IOC interrupts */
+	*rbtx4938_imask_ptr = 0;
+
+	/* clear SoftInt interrupts */
+	*rbtx4938_softint_ptr = 0;
+	tx4938_irq_init();
+	toshiba_rbtx4938_irq_ioc_init();
+	/* Onboard 10M Ether: High Active */
+	TX4938_WR(TX4938_MKA(TX4938_IRC_IRDM0), 0x00000040);
+
+	if (tx4938_ccfgptr->pcfg & TX4938_PCFG_SPI_SEL) {
+		txx9_spi_irqinit(RBTX4938_IRQ_IRC_SPI);
+        }
+
+	wbflush();
+}
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/prom.c b/arch/mips/tx4938/toshiba_rbtx4938/prom.c
new file mode 100644
index 000000000000..7df8b32ba265
--- /dev/null
+++ b/arch/mips/tx4938/toshiba_rbtx4938/prom.c
@@ -0,0 +1,78 @@
+/*
+ * linux/arch/mips/tx4938/toshiba_rbtx4938/prom.c
+ *
+ * rbtx4938 specific prom routines
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <asm/tx4938/tx4938.h>
+
+void __init prom_init_cmdline(void)
+{
+	int argc = (int) fw_arg0;
+	char **argv = (char **) fw_arg1;
+	int i;
+
+	/* ignore all built-in args if any f/w args given */
+	if (argc > 1) {
+		*arcs_cmdline = '\0';
+	}
+
+	for (i = 1; i < argc; i++) {
+		if (i != 1) {
+			strcat(arcs_cmdline, " ");
+		}
+		strcat(arcs_cmdline, argv[i]);
+	}
+}
+
+void __init prom_init(void)
+{
+	extern int tx4938_get_mem_size(void);
+	int msize;
+#ifndef CONFIG_TX4938_NAND_BOOT
+	prom_init_cmdline();
+#endif
+	mips_machgroup = MACH_GROUP_TOSHIBA;
+	mips_machtype = MACH_TOSHIBA_RBTX4938;
+
+	msize = tx4938_get_mem_size();
+	add_memory_region(0, msize << 20, BOOT_MEM_RAM);
+
+	return;
+}
+
+unsigned long  __init prom_free_prom_memory(void)
+{
+	return 0;
+}
+
+void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
+{
+	return;
+}
+
+const char *get_system_type(void)
+{
+	return "Toshiba RBTX4938";
+}
+
+char * __init prom_getcmdline(void)
+{
+	return &(arcs_cmdline[0]);
+}
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/setup.c b/arch/mips/tx4938/toshiba_rbtx4938/setup.c
new file mode 100644
index 000000000000..9f1dcc8ca5a3
--- /dev/null
+++ b/arch/mips/tx4938/toshiba_rbtx4938/setup.c
@@ -0,0 +1,1035 @@
+/*
+ * linux/arch/mips/tx4938/toshiba_rbtx4938/setup.c
+ *
+ * Setup pointers to hardware-dependent routines.
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/proc_fs.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/console.h>
+#include <linux/pci.h>
+#include <asm/wbflush.h>
+#include <asm/reboot.h>
+#include <asm/irq.h>
+#include <asm/time.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/bootinfo.h>
+#include <asm/tx4938/rbtx4938.h>
+#ifdef CONFIG_SERIAL_TXX9
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#endif
+
+extern void rbtx4938_time_init(void) __init;
+extern char * __init prom_getcmdline(void);
+static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr);
+
+/* These functions are used for rebooting or halting the machine*/
+extern void rbtx4938_machine_restart(char *command);
+extern void rbtx4938_machine_halt(void);
+extern void rbtx4938_machine_power_off(void);
+
+/* clocks */
+unsigned int txx9_master_clock;
+unsigned int txx9_cpu_clock;
+unsigned int txx9_gbus_clock;
+
+unsigned long rbtx4938_ce_base[8];
+unsigned long rbtx4938_ce_size[8];
+int txboard_pci66_mode;
+static int tx4938_pcic_trdyto;	/* default: disabled */
+static int tx4938_pcic_retryto;	/* default: disabled */
+static int tx4938_ccfg_toeon = 1;
+
+struct tx4938_pcic_reg *pcicptrs[4] = {
+       tx4938_pcicptr  /* default setting for TX4938 */
+};
+
+static struct {
+	unsigned long base;
+	unsigned long size;
+} phys_regions[16] __initdata;
+static int num_phys_regions  __initdata;
+
+#define PHYS_REGION_MINSIZE	0x10000
+
+void rbtx4938_machine_halt(void)
+{
+        printk(KERN_NOTICE "System Halted\n");
+	local_irq_disable();
+
+	while (1)
+		__asm__(".set\tmips3\n\t"
+			"wait\n\t"
+			".set\tmips0");
+}
+
+void rbtx4938_machine_power_off(void)
+{
+        rbtx4938_machine_halt();
+        /* no return */
+}
+
+void rbtx4938_machine_restart(char *command)
+{
+	local_irq_disable();
+
+	printk("Rebooting...");
+	*rbtx4938_softresetlock_ptr = 1;
+	*rbtx4938_sfvol_ptr = 1;
+	*rbtx4938_softreset_ptr = 1;
+	wbflush();
+
+	while(1);
+}
+
+void __init
+txboard_add_phys_region(unsigned long base, unsigned long size)
+{
+	if (num_phys_regions >= ARRAY_SIZE(phys_regions)) {
+		printk("phys_region overflow\n");
+		return;
+	}
+	phys_regions[num_phys_regions].base = base;
+	phys_regions[num_phys_regions].size = size;
+	num_phys_regions++;
+}
+unsigned long __init
+txboard_find_free_phys_region(unsigned long begin, unsigned long end,
+			      unsigned long size)
+{
+	unsigned long base;
+	int i;
+
+	for (base = begin / size * size; base < end; base += size) {
+		for (i = 0; i < num_phys_regions; i++) {
+			if (phys_regions[i].size &&
+			    base <= phys_regions[i].base + (phys_regions[i].size - 1) &&
+			    base + (size - 1) >= phys_regions[i].base)
+				break;
+		}
+		if (i == num_phys_regions)
+			return base;
+	}
+	return 0;
+}
+unsigned long __init
+txboard_find_free_phys_region_shrink(unsigned long begin, unsigned long end,
+				     unsigned long *size)
+{
+	unsigned long sz, base;
+	for (sz = *size; sz >= PHYS_REGION_MINSIZE; sz /= 2) {
+		base = txboard_find_free_phys_region(begin, end, sz);
+		if (base) {
+			*size = sz;
+			return base;
+		}
+	}
+	return 0;
+}
+unsigned long __init
+txboard_request_phys_region_range(unsigned long begin, unsigned long end,
+				  unsigned long size)
+{
+	unsigned long base;
+	base = txboard_find_free_phys_region(begin, end, size);
+	if (base)
+		txboard_add_phys_region(base, size);
+	return base;
+}
+unsigned long __init
+txboard_request_phys_region(unsigned long size)
+{
+	unsigned long base;
+	unsigned long begin = 0, end = 0x20000000;	/* search low 512MB */
+	base = txboard_find_free_phys_region(begin, end, size);
+	if (base)
+		txboard_add_phys_region(base, size);
+	return base;
+}
+unsigned long __init
+txboard_request_phys_region_shrink(unsigned long *size)
+{
+	unsigned long base;
+	unsigned long begin = 0, end = 0x20000000;	/* search low 512MB */
+	base = txboard_find_free_phys_region_shrink(begin, end, size);
+	if (base)
+		txboard_add_phys_region(base, *size);
+	return base;
+}
+
+#ifdef CONFIG_PCI
+void __init
+tx4938_pcic_setup(struct tx4938_pcic_reg *pcicptr,
+		  struct pci_controller *channel,
+		  unsigned long pci_io_base,
+		  int extarb)
+{
+	int i;
+
+	/* Disable All Initiator Space */
+	pcicptr->pciccfg &= ~(TX4938_PCIC_PCICCFG_G2PMEN(0)|
+			      TX4938_PCIC_PCICCFG_G2PMEN(1)|
+			      TX4938_PCIC_PCICCFG_G2PMEN(2)|
+			      TX4938_PCIC_PCICCFG_G2PIOEN);
+
+	/* GB->PCI mappings */
+	pcicptr->g2piomask = (channel->io_resource->end - channel->io_resource->start) >> 4;
+	pcicptr->g2piogbase = pci_io_base |
+#ifdef __BIG_ENDIAN
+		TX4938_PCIC_G2PIOGBASE_ECHG
+#else
+		TX4938_PCIC_G2PIOGBASE_BSDIS
+#endif
+		;
+	pcicptr->g2piopbase = 0;
+	for (i = 0; i < 3; i++) {
+		pcicptr->g2pmmask[i] = 0;
+		pcicptr->g2pmgbase[i] = 0;
+		pcicptr->g2pmpbase[i] = 0;
+	}
+	if (channel->mem_resource->end) {
+		pcicptr->g2pmmask[0] = (channel->mem_resource->end - channel->mem_resource->start) >> 4;
+		pcicptr->g2pmgbase[0] = channel->mem_resource->start |
+#ifdef __BIG_ENDIAN
+			TX4938_PCIC_G2PMnGBASE_ECHG
+#else
+			TX4938_PCIC_G2PMnGBASE_BSDIS
+#endif
+			;
+		pcicptr->g2pmpbase[0] = channel->mem_resource->start;
+	}
+	/* PCI->GB mappings (I/O 256B) */
+	pcicptr->p2giopbase = 0; /* 256B */
+	pcicptr->p2giogbase = 0;
+	/* PCI->GB mappings (MEM 512MB (64MB on R1.x)) */
+	pcicptr->p2gm0plbase = 0;
+	pcicptr->p2gm0pubase = 0;
+	pcicptr->p2gmgbase[0] = 0 |
+		TX4938_PCIC_P2GMnGBASE_TMEMEN |
+#ifdef __BIG_ENDIAN
+		TX4938_PCIC_P2GMnGBASE_TECHG
+#else
+		TX4938_PCIC_P2GMnGBASE_TBSDIS
+#endif
+		;
+	/* PCI->GB mappings (MEM 16MB) */
+	pcicptr->p2gm1plbase = 0xffffffff;
+	pcicptr->p2gm1pubase = 0xffffffff;
+	pcicptr->p2gmgbase[1] = 0;
+	/* PCI->GB mappings (MEM 1MB) */
+	pcicptr->p2gm2pbase = 0xffffffff; /* 1MB */
+	pcicptr->p2gmgbase[2] = 0;
+
+	pcicptr->pciccfg &= TX4938_PCIC_PCICCFG_GBWC_MASK;
+	/* Enable Initiator Memory Space */
+	if (channel->mem_resource->end)
+		pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PMEN(0);
+	/* Enable Initiator I/O Space */
+	if (channel->io_resource->end)
+		pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PIOEN;
+	/* Enable Initiator Config */
+	pcicptr->pciccfg |=
+		TX4938_PCIC_PCICCFG_ICAEN |
+		TX4938_PCIC_PCICCFG_TCAR;
+
+	/* Do not use MEMMUL, MEMINF: YMFPCI card causes M_ABORT. */
+	pcicptr->pcicfg1 = 0;
+
+	pcicptr->g2ptocnt &= ~0xffff;
+
+	if (tx4938_pcic_trdyto >= 0) {
+		pcicptr->g2ptocnt &= ~0xff;
+		pcicptr->g2ptocnt |= (tx4938_pcic_trdyto & 0xff);
+	}
+
+	if (tx4938_pcic_retryto >= 0) {
+		pcicptr->g2ptocnt &= ~0xff00;
+		pcicptr->g2ptocnt |= ((tx4938_pcic_retryto<<8) & 0xff00);
+	}
+
+	/* Clear All Local Bus Status */
+	pcicptr->pcicstatus = TX4938_PCIC_PCICSTATUS_ALL;
+	/* Enable All Local Bus Interrupts */
+	pcicptr->pcicmask = TX4938_PCIC_PCICSTATUS_ALL;
+	/* Clear All Initiator Status */
+	pcicptr->g2pstatus = TX4938_PCIC_G2PSTATUS_ALL;
+	/* Enable All Initiator Interrupts */
+	pcicptr->g2pmask = TX4938_PCIC_G2PSTATUS_ALL;
+	/* Clear All PCI Status Error */
+	pcicptr->pcistatus =
+		(pcicptr->pcistatus & 0x0000ffff) |
+		(TX4938_PCIC_PCISTATUS_ALL << 16);
+	/* Enable All PCI Status Error Interrupts */
+	pcicptr->pcimask = TX4938_PCIC_PCISTATUS_ALL;
+
+	if (!extarb) {
+		/* Reset Bus Arbiter */
+		pcicptr->pbacfg = TX4938_PCIC_PBACFG_RPBA;
+		pcicptr->pbabm = 0;
+		/* Enable Bus Arbiter */
+		pcicptr->pbacfg = TX4938_PCIC_PBACFG_PBAEN;
+	}
+
+      /* PCIC Int => IRC IRQ16 */
+	pcicptr->pcicfg2 =
+		    (pcicptr->pcicfg2 & 0xffffff00) | TX4938_IR_PCIC;
+
+	pcicptr->pcistatus = PCI_COMMAND_MASTER |
+		PCI_COMMAND_MEMORY |
+		PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
+}
+
+int __init
+tx4938_report_pciclk(void)
+{
+	unsigned long pcode = TX4938_REV_PCODE();
+	int pciclk = 0;
+	printk("TX%lx PCIC --%s PCICLK:",
+	       pcode,
+	       (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) ? " PCI66" : "");
+	if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) {
+
+		switch ((unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK) {
+		case TX4938_CCFG_PCIDIVMODE_4:
+			pciclk = txx9_cpu_clock / 4; break;
+		case TX4938_CCFG_PCIDIVMODE_4_5:
+			pciclk = txx9_cpu_clock * 2 / 9; break;
+		case TX4938_CCFG_PCIDIVMODE_5:
+			pciclk = txx9_cpu_clock / 5; break;
+		case TX4938_CCFG_PCIDIVMODE_5_5:
+			pciclk = txx9_cpu_clock * 2 / 11; break;
+		case TX4938_CCFG_PCIDIVMODE_8:
+			pciclk = txx9_cpu_clock / 8; break;
+		case TX4938_CCFG_PCIDIVMODE_9:
+			pciclk = txx9_cpu_clock / 9; break;
+		case TX4938_CCFG_PCIDIVMODE_10:
+			pciclk = txx9_cpu_clock / 10; break;
+		case TX4938_CCFG_PCIDIVMODE_11:
+			pciclk = txx9_cpu_clock / 11; break;
+		}
+		printk("Internal(%dMHz)", pciclk / 1000000);
+	} else {
+		printk("External");
+		pciclk = -1;
+	}
+	printk("\n");
+	return pciclk;
+}
+
+void __init set_tx4938_pcicptr(int ch, struct tx4938_pcic_reg *pcicptr)
+{
+	pcicptrs[ch] = pcicptr;
+}
+
+struct tx4938_pcic_reg *get_tx4938_pcicptr(int ch)
+{
+       return pcicptrs[ch];
+}
+
+static struct pci_dev *fake_pci_dev(struct pci_controller *hose,
+                                    int top_bus, int busnr, int devfn)
+{
+	static struct pci_dev dev;
+	static struct pci_bus bus;
+
+	dev.sysdata = (void *)hose;
+	dev.devfn = devfn;
+	bus.number = busnr;
+	bus.ops = hose->pci_ops;
+	bus.parent = NULL;
+	dev.bus = &bus;
+
+	return &dev;
+}
+
+#define EARLY_PCI_OP(rw, size, type)                                    \
+static int early_##rw##_config_##size(struct pci_controller *hose,      \
+        int top_bus, int bus, int devfn, int offset, type value)        \
+{                                                                       \
+        return pci_##rw##_config_##size(                                \
+                fake_pci_dev(hose, top_bus, bus, devfn),                \
+                offset, value);                                         \
+}
+
+EARLY_PCI_OP(read, word, u16 *)
+
+int txboard_pci66_check(struct pci_controller *hose, int top_bus, int current_bus)
+{
+	u32 pci_devfn;
+	unsigned short vid;
+	int devfn_start = 0;
+	int devfn_stop = 0xff;
+	int cap66 = -1;
+	u16 stat;
+
+	printk("PCI: Checking 66MHz capabilities...\n");
+
+	for (pci_devfn=devfn_start; pci_devfn<devfn_stop; pci_devfn++) {
+		early_read_config_word(hose, top_bus, current_bus, pci_devfn,
+				       PCI_VENDOR_ID, &vid);
+
+		if (vid == 0xffff) continue;
+
+		/* check 66MHz capability */
+		if (cap66 < 0)
+			cap66 = 1;
+		if (cap66) {
+			early_read_config_word(hose, top_bus, current_bus, pci_devfn,
+					       PCI_STATUS, &stat);
+			if (!(stat & PCI_STATUS_66MHZ)) {
+				printk(KERN_DEBUG "PCI: %02x:%02x not 66MHz capable.\n",
+				       current_bus, pci_devfn);
+				cap66 = 0;
+				break;
+			}
+		}
+	}
+	return cap66 > 0;
+}
+
+int __init
+tx4938_pciclk66_setup(void)
+{
+	int pciclk;
+
+	/* Assert M66EN */
+	tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI66;
+	/* Double PCICLK (if possible) */
+	if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) {
+		unsigned int pcidivmode =
+			tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK;
+		switch (pcidivmode) {
+		case TX4938_CCFG_PCIDIVMODE_8:
+		case TX4938_CCFG_PCIDIVMODE_4:
+			pcidivmode = TX4938_CCFG_PCIDIVMODE_4;
+			pciclk = txx9_cpu_clock / 4;
+			break;
+		case TX4938_CCFG_PCIDIVMODE_9:
+		case TX4938_CCFG_PCIDIVMODE_4_5:
+			pcidivmode = TX4938_CCFG_PCIDIVMODE_4_5;
+			pciclk = txx9_cpu_clock * 2 / 9;
+			break;
+		case TX4938_CCFG_PCIDIVMODE_10:
+		case TX4938_CCFG_PCIDIVMODE_5:
+			pcidivmode = TX4938_CCFG_PCIDIVMODE_5;
+			pciclk = txx9_cpu_clock / 5;
+			break;
+		case TX4938_CCFG_PCIDIVMODE_11:
+		case TX4938_CCFG_PCIDIVMODE_5_5:
+		default:
+			pcidivmode = TX4938_CCFG_PCIDIVMODE_5_5;
+			pciclk = txx9_cpu_clock * 2 / 11;
+			break;
+		}
+		tx4938_ccfgptr->ccfg =
+			(tx4938_ccfgptr->ccfg & ~TX4938_CCFG_PCIDIVMODE_MASK)
+			| pcidivmode;
+		printk(KERN_DEBUG "PCICLK: ccfg:%08lx\n",
+		       (unsigned long)tx4938_ccfgptr->ccfg);
+	} else {
+		pciclk = -1;
+	}
+	return pciclk;
+}
+
+extern struct pci_controller tx4938_pci_controller[];
+static int __init tx4938_pcibios_init(void)
+{
+	unsigned long mem_base[2];
+	unsigned long mem_size[2] = {TX4938_PCIMEM_SIZE_0,TX4938_PCIMEM_SIZE_1}; /* MAX 128M,64K */
+	unsigned long io_base[2];
+	unsigned long io_size[2] = {TX4938_PCIIO_SIZE_0,TX4938_PCIIO_SIZE_1}; /* MAX 16M,64K */
+	/* TX4938 PCIC1: 64K MEM/IO is enough for ETH0,ETH1 */
+	int extarb = !(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB);
+
+	PCIBIOS_MIN_IO = 0x00001000UL;
+	PCIBIOS_MIN_MEM = 0x01000000UL;
+
+	mem_base[0] = txboard_request_phys_region_shrink(&mem_size[0]);
+	io_base[0] = txboard_request_phys_region_shrink(&io_size[0]);
+
+	printk("TX4938 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n",
+	       (unsigned short)(tx4938_pcicptr->pciid >> 16),
+	       (unsigned short)(tx4938_pcicptr->pciid & 0xffff),
+	       (unsigned short)(tx4938_pcicptr->pciccrev & 0xff),
+	       extarb ? "External" : "Internal");
+
+	/* setup PCI area */
+	tx4938_pci_controller[0].io_resource->start = io_base[0];
+	tx4938_pci_controller[0].io_resource->end = (io_base[0] + io_size[0]) - 1;
+	tx4938_pci_controller[0].mem_resource->start = mem_base[0];
+	tx4938_pci_controller[0].mem_resource->end = mem_base[0] + mem_size[0] - 1;
+
+	set_tx4938_pcicptr(0, tx4938_pcicptr);
+
+	register_pci_controller(&tx4938_pci_controller[0]);
+
+	if (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) {
+		printk("TX4938_CCFG_PCI66 already configured\n");
+		txboard_pci66_mode = -1; /* already configured */
+	}
+
+	/* Reset PCI Bus */
+	*rbtx4938_pcireset_ptr = 0;
+	/* Reset PCIC */
+	tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST;
+	if (txboard_pci66_mode > 0)
+		tx4938_pciclk66_setup();
+	mdelay(10);
+	/* clear PCIC reset */
+	tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST;
+	*rbtx4938_pcireset_ptr = 1;
+	wbflush();
+	tx4938_report_pcic_status1(tx4938_pcicptr);
+
+	tx4938_report_pciclk();
+	tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb);
+	if (txboard_pci66_mode == 0 &&
+	    txboard_pci66_check(&tx4938_pci_controller[0], 0, 0)) {
+		/* Reset PCI Bus */
+		*rbtx4938_pcireset_ptr = 0;
+		/* Reset PCIC */
+		tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST;
+		tx4938_pciclk66_setup();
+		mdelay(10);
+		/* clear PCIC reset */
+		tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST;
+		*rbtx4938_pcireset_ptr = 1;
+		wbflush();
+		/* Reinitialize PCIC */
+		tx4938_report_pciclk();
+		tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb);
+	}
+
+	mem_base[1] = txboard_request_phys_region_shrink(&mem_size[1]);
+	io_base[1] = txboard_request_phys_region_shrink(&io_size[1]);
+	/* Reset PCIC1 */
+	tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIC1RST;
+	/* PCI1DMD==0 => PCI1CLK==GBUSCLK/2 => PCI66 */
+	if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD))
+		tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI1_66;
+	else
+		tx4938_ccfgptr->ccfg &= ~TX4938_CCFG_PCI1_66;
+	mdelay(10);
+	/* clear PCIC1 reset */
+	tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST;
+	tx4938_report_pcic_status1(tx4938_pcic1ptr);
+
+	printk("TX4938 PCIC1 -- DID:%04x VID:%04x RID:%02x",
+	       (unsigned short)(tx4938_pcic1ptr->pciid >> 16),
+	       (unsigned short)(tx4938_pcic1ptr->pciid & 0xffff),
+	       (unsigned short)(tx4938_pcic1ptr->pciccrev & 0xff));
+	printk("%s PCICLK:%dMHz\n",
+	       (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1_66) ? " PCI66" : "",
+	       txx9_gbus_clock /
+	       ((tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD) ? 4 : 2) /
+	       1000000);
+
+	/* assumption: CPHYSADDR(mips_io_port_base) == io_base[0] */
+	tx4938_pci_controller[1].io_resource->start =
+		io_base[1] - io_base[0];
+	tx4938_pci_controller[1].io_resource->end =
+		io_base[1] - io_base[0] + io_size[1] - 1;
+	tx4938_pci_controller[1].mem_resource->start = mem_base[1];
+	tx4938_pci_controller[1].mem_resource->end =
+		mem_base[1] + mem_size[1] - 1;
+	set_tx4938_pcicptr(1, tx4938_pcic1ptr);
+
+	register_pci_controller(&tx4938_pci_controller[1]);
+
+	tx4938_pcic_setup(tx4938_pcic1ptr, &tx4938_pci_controller[1], io_base[1], extarb);
+
+	/* map ioport 0 to PCI I/O space address 0 */
+	set_io_port_base(KSEG1 + io_base[0]);
+
+	return 0;
+}
+
+arch_initcall(tx4938_pcibios_init);
+
+#endif /* CONFIG_PCI */
+
+/* SPI support */
+
+/* chip select for SPI devices */
+#define	SEEPROM1_CS	7	/* PIO7 */
+#define	SEEPROM2_CS	0	/* IOC */
+#define	SEEPROM3_CS	1	/* IOC */
+#define	SRTC_CS	2	/* IOC */
+
+static int rbtx4938_spi_cs_func(int chipid, int on)
+{
+	unsigned char bit;
+	switch (chipid) {
+	case RBTX4938_SEEPROM1_CHIPID:
+		if (on)
+			tx4938_pioptr->dout &= ~(1 << SEEPROM1_CS);
+		else
+			tx4938_pioptr->dout |= (1 << SEEPROM1_CS);
+		return 0;
+		break;
+	case RBTX4938_SEEPROM2_CHIPID:
+		bit = (1 << SEEPROM2_CS);
+		break;
+	case RBTX4938_SEEPROM3_CHIPID:
+		bit = (1 << SEEPROM3_CS);
+		break;
+	case RBTX4938_SRTC_CHIPID:
+		bit = (1 << SRTC_CS);
+		break;
+	default:
+		return -ENODEV;
+	}
+	/* bit1,2,4 are low active, bit3 is high active */
+	*rbtx4938_spics_ptr =
+		(*rbtx4938_spics_ptr & ~bit) |
+		((on ? (bit ^ 0x0b) : ~(bit ^ 0x0b)) & bit);
+	return 0;
+}
+
+#ifdef CONFIG_PCI
+extern int spi_eeprom_read(int chipid, int address, unsigned char *buf, int len);
+
+int rbtx4938_get_tx4938_ethaddr(struct pci_dev *dev, unsigned char *addr)
+{
+	struct pci_controller *channel = (struct pci_controller *)dev->bus->sysdata;
+	static unsigned char dat[17];
+	static int read_dat = 0;
+	int ch = 0;
+
+	if (channel != &tx4938_pci_controller[1])
+		return -ENODEV;
+	/* TX4938 PCIC1 */
+	switch (PCI_SLOT(dev->devfn)) {
+	case TX4938_PCIC_IDSEL_AD_TO_SLOT(31):
+		ch = 0;
+		break;
+	case TX4938_PCIC_IDSEL_AD_TO_SLOT(30):
+		ch = 1;
+		break;
+	default:
+		return -ENODEV;
+	}
+	if (!read_dat) {
+		unsigned char sum;
+		int i;
+		read_dat = 1;
+		/* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */
+		if (spi_eeprom_read(RBTX4938_SEEPROM1_CHIPID,
+				    0, dat, sizeof(dat))) {
+			printk(KERN_ERR "seeprom: read error.\n");
+		} else {
+			if (strcmp(dat, "MAC") != 0)
+				printk(KERN_WARNING "seeprom: bad signature.\n");
+			for (i = 0, sum = 0; i < sizeof(dat); i++)
+				sum += dat[i];
+			if (sum)
+				printk(KERN_WARNING "seeprom: bad checksum.\n");
+		}
+	}
+	memcpy(addr, &dat[4 + 6 * ch], 6);
+	return 0;
+}
+#endif /* CONFIG_PCI */
+
+extern void __init txx9_spi_init(unsigned long base, int (*cs_func)(int chipid, int on));
+static void __init rbtx4938_spi_setup(void)
+{
+	/* set SPI_SEL */
+	tx4938_ccfgptr->pcfg |= TX4938_PCFG_SPI_SEL;
+	/* chip selects for SPI devices */
+	tx4938_pioptr->dout |= (1 << SEEPROM1_CS);
+	tx4938_pioptr->dir |= (1 << SEEPROM1_CS);
+	txx9_spi_init(TX4938_SPI_REG, rbtx4938_spi_cs_func);
+}
+
+static struct resource rbtx4938_fpga_resource;
+
+static char pcode_str[8];
+static struct resource tx4938_reg_resource = {
+	pcode_str, TX4938_REG_BASE, TX4938_REG_BASE+TX4938_REG_SIZE, IORESOURCE_MEM
+};
+
+void __init tx4938_board_setup(void)
+{
+	int i;
+	unsigned long divmode;
+	int cpuclk = 0;
+	unsigned long pcode = TX4938_REV_PCODE();
+
+	ioport_resource.start = 0x1000;
+	ioport_resource.end = 0xffffffff;
+	iomem_resource.start = 0x1000;
+	iomem_resource.end = 0xffffffff;	/* expand to 4GB */
+
+	sprintf(pcode_str, "TX%lx", pcode);
+	/* SDRAMC,EBUSC are configured by PROM */
+	for (i = 0; i < 8; i++) {
+		if (!(tx4938_ebuscptr->cr[i] & 0x8))
+			continue;	/* disabled */
+ 		rbtx4938_ce_base[i] = (unsigned long)TX4938_EBUSC_BA(i);
+		txboard_add_phys_region(rbtx4938_ce_base[i], TX4938_EBUSC_SIZE(i));
+	}
+
+	/* clocks */
+	if (txx9_master_clock) {
+		/* calculate gbus_clock and cpu_clock from master_clock */
+		divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK;
+		switch (divmode) {
+		case TX4938_CCFG_DIVMODE_8:
+		case TX4938_CCFG_DIVMODE_10:
+		case TX4938_CCFG_DIVMODE_12:
+		case TX4938_CCFG_DIVMODE_16:
+		case TX4938_CCFG_DIVMODE_18:
+			txx9_gbus_clock = txx9_master_clock * 4; break;
+		default:
+			txx9_gbus_clock = txx9_master_clock;
+		}
+		switch (divmode) {
+		case TX4938_CCFG_DIVMODE_2:
+		case TX4938_CCFG_DIVMODE_8:
+			cpuclk = txx9_gbus_clock * 2; break;
+		case TX4938_CCFG_DIVMODE_2_5:
+		case TX4938_CCFG_DIVMODE_10:
+			cpuclk = txx9_gbus_clock * 5 / 2; break;
+		case TX4938_CCFG_DIVMODE_3:
+		case TX4938_CCFG_DIVMODE_12:
+			cpuclk = txx9_gbus_clock * 3; break;
+		case TX4938_CCFG_DIVMODE_4:
+		case TX4938_CCFG_DIVMODE_16:
+			cpuclk = txx9_gbus_clock * 4; break;
+		case TX4938_CCFG_DIVMODE_4_5:
+		case TX4938_CCFG_DIVMODE_18:
+			cpuclk = txx9_gbus_clock * 9 / 2; break;
+		}
+		txx9_cpu_clock = cpuclk;
+	} else {
+		if (txx9_cpu_clock == 0) {
+			txx9_cpu_clock = 300000000;	/* 300MHz */
+		}
+		/* calculate gbus_clock and master_clock from cpu_clock */
+		cpuclk = txx9_cpu_clock;
+		divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK;
+		switch (divmode) {
+		case TX4938_CCFG_DIVMODE_2:
+		case TX4938_CCFG_DIVMODE_8:
+			txx9_gbus_clock = cpuclk / 2; break;
+		case TX4938_CCFG_DIVMODE_2_5:
+		case TX4938_CCFG_DIVMODE_10:
+			txx9_gbus_clock = cpuclk * 2 / 5; break;
+		case TX4938_CCFG_DIVMODE_3:
+		case TX4938_CCFG_DIVMODE_12:
+			txx9_gbus_clock = cpuclk / 3; break;
+		case TX4938_CCFG_DIVMODE_4:
+		case TX4938_CCFG_DIVMODE_16:
+			txx9_gbus_clock = cpuclk / 4; break;
+		case TX4938_CCFG_DIVMODE_4_5:
+		case TX4938_CCFG_DIVMODE_18:
+			txx9_gbus_clock = cpuclk * 2 / 9; break;
+		}
+		switch (divmode) {
+		case TX4938_CCFG_DIVMODE_8:
+		case TX4938_CCFG_DIVMODE_10:
+		case TX4938_CCFG_DIVMODE_12:
+		case TX4938_CCFG_DIVMODE_16:
+		case TX4938_CCFG_DIVMODE_18:
+			txx9_master_clock = txx9_gbus_clock / 4; break;
+		default:
+			txx9_master_clock = txx9_gbus_clock;
+		}
+	}
+	/* change default value to udelay/mdelay take reasonable time */
+	loops_per_jiffy = txx9_cpu_clock / HZ / 2;
+
+	/* CCFG */
+	/* clear WatchDogReset,BusErrorOnWrite flag (W1C) */
+	tx4938_ccfgptr->ccfg |= TX4938_CCFG_WDRST | TX4938_CCFG_BEOW;
+	/* clear PCIC1 reset */
+	if (tx4938_ccfgptr->clkctr & TX4938_CLKCTR_PCIC1RST)
+		tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST;
+
+	/* enable Timeout BusError */
+	if (tx4938_ccfg_toeon)
+		tx4938_ccfgptr->ccfg |= TX4938_CCFG_TOE;
+
+	/* DMA selection */
+	tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_DMASEL_ALL;
+
+	/* Use external clock for external arbiter */
+	if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB))
+		tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_PCICLKEN_ALL;
+
+	printk("%s -- %dMHz(M%dMHz) CRIR:%08lx CCFG:%Lx PCFG:%Lx\n",
+	       pcode_str,
+	       cpuclk / 1000000, txx9_master_clock / 1000000,
+	       (unsigned long)tx4938_ccfgptr->crir,
+	       tx4938_ccfgptr->ccfg,
+	       tx4938_ccfgptr->pcfg);
+
+	printk("%s SDRAMC --", pcode_str);
+	for (i = 0; i < 4; i++) {
+		unsigned long long cr = tx4938_sdramcptr->cr[i];
+		unsigned long ram_base, ram_size;
+		if (!((unsigned long)cr & 0x00000400))
+			continue;	/* disabled */
+		ram_base = (unsigned long)(cr >> 49) << 21;
+		ram_size = ((unsigned long)(cr >> 33) + 1) << 21;
+		if (ram_base >= 0x20000000)
+			continue;	/* high memory (ignore) */
+		printk(" CR%d:%016Lx", i, cr);
+		txboard_add_phys_region(ram_base, ram_size);
+	}
+	printk(" TR:%09Lx\n", tx4938_sdramcptr->tr);
+
+	/* SRAM */
+	if (pcode == 0x4938 && tx4938_sramcptr->cr & 1) {
+		unsigned int size = 0x800;
+		unsigned long base =
+			(tx4938_sramcptr->cr >> (39-11)) & ~(size - 1);
+		 txboard_add_phys_region(base, size);
+	}
+
+	/* IRC */
+	/* disable interrupt control */
+	tx4938_ircptr->cer = 0;
+
+	/* TMR */
+	/* disable all timers */
+	for (i = 0; i < TX4938_NR_TMR; i++) {
+		tx4938_tmrptr(i)->tcr  = 0x00000020;
+		tx4938_tmrptr(i)->tisr = 0;
+		tx4938_tmrptr(i)->cpra = 0xffffffff;
+		tx4938_tmrptr(i)->itmr = 0;
+		tx4938_tmrptr(i)->ccdr = 0;
+		tx4938_tmrptr(i)->pgmr = 0;
+	}
+
+	/* enable DMA */
+	TX4938_WR64(0xff1fb150, TX4938_DMA_MCR_MSTEN);
+	TX4938_WR64(0xff1fb950, TX4938_DMA_MCR_MSTEN);
+
+	/* PIO */
+	tx4938_pioptr->maskcpu = 0;
+	tx4938_pioptr->maskext = 0;
+
+	/* TX4938 internal registers */
+	if (request_resource(&iomem_resource, &tx4938_reg_resource))
+		printk("request resource for internal registers failed\n");
+}
+
+#ifdef CONFIG_PCI
+static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr)
+{
+	unsigned short pcistatus = (unsigned short)(pcicptr->pcistatus >> 16);
+	unsigned long g2pstatus = pcicptr->g2pstatus;
+	unsigned long pcicstatus = pcicptr->pcicstatus;
+	static struct {
+		unsigned long flag;
+		const char *str;
+	} pcistat_tbl[] = {
+		{ PCI_STATUS_DETECTED_PARITY,	"DetectedParityError" },
+		{ PCI_STATUS_SIG_SYSTEM_ERROR,	"SignaledSystemError" },
+		{ PCI_STATUS_REC_MASTER_ABORT,	"ReceivedMasterAbort" },
+		{ PCI_STATUS_REC_TARGET_ABORT,	"ReceivedTargetAbort" },
+		{ PCI_STATUS_SIG_TARGET_ABORT,	"SignaledTargetAbort" },
+		{ PCI_STATUS_PARITY,	"MasterParityError" },
+	}, g2pstat_tbl[] = {
+		{ TX4938_PCIC_G2PSTATUS_TTOE,	"TIOE" },
+		{ TX4938_PCIC_G2PSTATUS_RTOE,	"RTOE" },
+	}, pcicstat_tbl[] = {
+		{ TX4938_PCIC_PCICSTATUS_PME,	"PME" },
+		{ TX4938_PCIC_PCICSTATUS_TLB,	"TLB" },
+		{ TX4938_PCIC_PCICSTATUS_NIB,	"NIB" },
+		{ TX4938_PCIC_PCICSTATUS_ZIB,	"ZIB" },
+		{ TX4938_PCIC_PCICSTATUS_PERR,	"PERR" },
+		{ TX4938_PCIC_PCICSTATUS_SERR,	"SERR" },
+		{ TX4938_PCIC_PCICSTATUS_GBE,	"GBE" },
+		{ TX4938_PCIC_PCICSTATUS_IWB,	"IWB" },
+	};
+	int i;
+
+	printk("pcistat:%04x(", pcistatus);
+	for (i = 0; i < ARRAY_SIZE(pcistat_tbl); i++)
+		if (pcistatus & pcistat_tbl[i].flag)
+			printk("%s ", pcistat_tbl[i].str);
+	printk("), g2pstatus:%08lx(", g2pstatus);
+	for (i = 0; i < ARRAY_SIZE(g2pstat_tbl); i++)
+		if (g2pstatus & g2pstat_tbl[i].flag)
+			printk("%s ", g2pstat_tbl[i].str);
+	printk("), pcicstatus:%08lx(", pcicstatus);
+	for (i = 0; i < ARRAY_SIZE(pcicstat_tbl); i++)
+		if (pcicstatus & pcicstat_tbl[i].flag)
+			printk("%s ", pcicstat_tbl[i].str);
+	printk(")\n");
+}
+
+void tx4938_report_pcic_status(void)
+{
+	int i;
+	struct tx4938_pcic_reg *pcicptr;
+	for (i = 0; (pcicptr = get_tx4938_pcicptr(i)) != NULL; i++)
+		tx4938_report_pcic_status1(pcicptr);
+}
+
+#endif /* CONFIG_PCI */
+
+/* We use onchip r4k counter or TMR timer as our system wide timer
+ * interrupt running at 100HZ. */
+
+extern void __init rtc_rx5c348_init(int chipid);
+void __init rbtx4938_time_init(void)
+{
+	rtc_rx5c348_init(RBTX4938_SRTC_CHIPID);
+	mips_hpt_frequency = txx9_cpu_clock / 2;
+}
+
+void __init toshiba_rbtx4938_setup(void)
+{
+	unsigned long long pcfg;
+	char *argptr;
+
+	iomem_resource.end = 0xffffffff;	/* 4GB */
+
+	if (txx9_master_clock == 0)
+		txx9_master_clock = 25000000; /* 25MHz */
+	tx4938_board_setup();
+	/* setup irq stuff */
+	TX4938_WR(TX4938_MKA(TX4938_IRC_IRDM0), 0x00000000);	/* irq trigger */
+	TX4938_WR(TX4938_MKA(TX4938_IRC_IRDM1), 0x00000000);	/* irq trigger */
+	/* setup serial stuff */
+	TX4938_WR(0xff1ff314, 0x00000000);	/* h/w flow control off */
+	TX4938_WR(0xff1ff414, 0x00000000);	/* h/w flow control off */
+
+#ifndef CONFIG_PCI
+	set_io_port_base(RBTX4938_ETHER_BASE);
+#endif
+
+#ifdef CONFIG_SERIAL_TXX9
+	{
+		extern int early_serial_txx9_setup(struct uart_port *port);
+		int i;
+		struct uart_port req;
+		for(i = 0; i < 2; i++) {
+			memset(&req, 0, sizeof(req));
+			req.line = i;
+			req.iotype = UPIO_MEM;
+			req.membase = (char *)(0xff1ff300 + i * 0x100);
+			req.mapbase = 0xff1ff300 + i * 0x100;
+			req.irq = 32 + i;
+			req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
+			req.uartclk = 50000000;
+			early_serial_txx9_setup(&req);
+		}
+	}
+#ifdef CONFIG_SERIAL_TXX9_CONSOLE
+        argptr = prom_getcmdline();
+        if (strstr(argptr, "console=") == NULL) {
+                strcat(argptr, " console=ttyS0,38400");
+        }
+#endif
+#endif
+
+#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
+	printk("PIOSEL: disabling both ata and nand selection\n");
+	local_irq_disable();
+	tx4938_ccfgptr->pcfg &= ~(TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL);
+#endif
+
+#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND
+	printk("PIOSEL: enabling nand selection\n");
+	tx4938_ccfgptr->pcfg |= TX4938_PCFG_NDF_SEL;
+	tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_ATA_SEL;
+#endif
+
+#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA
+	printk("PIOSEL: enabling ata selection\n");
+	tx4938_ccfgptr->pcfg |= TX4938_PCFG_ATA_SEL;
+	tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_NDF_SEL;
+#endif
+
+#ifdef CONFIG_IP_PNP
+	argptr = prom_getcmdline();
+	if (strstr(argptr, "ip=") == NULL) {
+		strcat(argptr, " ip=any");
+	}
+#endif
+
+
+#ifdef CONFIG_FB
+	{
+		conswitchp = &dummy_con;
+	}
+#endif
+
+	rbtx4938_spi_setup();
+	pcfg = tx4938_ccfgptr->pcfg;	/* updated */
+	/* fixup piosel */
+	if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) ==
+	    TX4938_PCFG_ATA_SEL) {
+		*rbtx4938_piosel_ptr = (*rbtx4938_piosel_ptr & 0x03) | 0x04;
+	}
+	else if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) ==
+	    TX4938_PCFG_NDF_SEL) {
+		*rbtx4938_piosel_ptr = (*rbtx4938_piosel_ptr & 0x03) | 0x08;
+	}
+	else {
+		*rbtx4938_piosel_ptr &= ~(0x08 | 0x04);
+	}
+
+	rbtx4938_fpga_resource.name = "FPGA Registers";
+	rbtx4938_fpga_resource.start = CPHYSADDR(RBTX4938_FPGA_REG_ADDR);
+	rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff;
+	rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+	if (request_resource(&iomem_resource, &rbtx4938_fpga_resource))
+		printk("request resource for fpga failed\n");
+
+	/* disable all OnBoard I/O interrupts */
+	*rbtx4938_imask_ptr = 0;
+
+	_machine_restart = rbtx4938_machine_restart;
+	_machine_halt = rbtx4938_machine_halt;
+	_machine_power_off = rbtx4938_machine_power_off;
+
+	*rbtx4938_led_ptr = 0xff;
+	printk("RBTX4938 --- FPGA(Rev %02x)", *rbtx4938_fpga_rev_ptr);
+	printk(" DIPSW:%02x,%02x\n",
+	       *rbtx4938_dipsw_ptr, *rbtx4938_bdipsw_ptr);
+}
+
+#ifdef CONFIG_PROC_FS
+extern void spi_eeprom_proc_create(struct proc_dir_entry *dir, int chipid);
+static int __init tx4938_spi_proc_setup(void)
+{
+	struct proc_dir_entry *tx4938_spi_eeprom_dir;
+
+	tx4938_spi_eeprom_dir = proc_mkdir("spi_eeprom", 0);
+
+	if (!tx4938_spi_eeprom_dir)
+		return -ENOMEM;
+
+	/* don't allow user access to RBTX4938_SEEPROM1_CHIPID
+	 * as it contains eth0 and eth1 MAC addresses
+	 */
+	spi_eeprom_proc_create(tx4938_spi_eeprom_dir, RBTX4938_SEEPROM2_CHIPID);
+	spi_eeprom_proc_create(tx4938_spi_eeprom_dir, RBTX4938_SEEPROM3_CHIPID);
+
+	return 0;
+}
+
+__initcall(tx4938_spi_proc_setup);
+#endif
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c b/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c
new file mode 100644
index 000000000000..951a208ee9b3
--- /dev/null
+++ b/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c
@@ -0,0 +1,219 @@
+/*
+ * linux/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/proc_fs.h>
+#include <linux/spinlock.h>
+#include <asm/tx4938/spi.h>
+#include <asm/tx4938/tx4938.h>
+
+/* ATMEL 250x0 instructions */
+#define	ATMEL_WREN	0x06
+#define	ATMEL_WRDI	0x04
+#define ATMEL_RDSR	0x05
+#define ATMEL_WRSR	0x01
+#define	ATMEL_READ	0x03
+#define	ATMEL_WRITE	0x02
+
+#define ATMEL_SR_BSY	0x01
+#define ATMEL_SR_WEN	0x02
+#define ATMEL_SR_BP0	0x04
+#define ATMEL_SR_BP1	0x08
+
+DEFINE_SPINLOCK(spi_eeprom_lock);
+
+static struct spi_dev_desc seeprom_dev_desc = {
+	.baud 		= 1500000,	/* 1.5Mbps */
+	.tcss		= 1,
+	.tcsh		= 1,
+	.tcsr		= 1,
+	.byteorder	= 1,		/* MSB-First */
+	.polarity	= 0,		/* High-Active */
+	.phase		= 0,		/* Sample-Then-Shift */
+
+};
+static inline int
+spi_eeprom_io(int chipid,
+	      unsigned char **inbufs, unsigned int *incounts,
+	      unsigned char **outbufs, unsigned int *outcounts)
+{
+	return txx9_spi_io(chipid, &seeprom_dev_desc,
+			   inbufs, incounts, outbufs, outcounts, 0);
+}
+
+int spi_eeprom_write_enable(int chipid, int enable)
+{
+	unsigned char inbuf[1];
+	unsigned char *inbufs[1];
+	unsigned int incounts[2];
+	unsigned long flags;
+	int stat;
+	inbuf[0] = enable ? ATMEL_WREN : ATMEL_WRDI;
+	inbufs[0] = inbuf;
+	incounts[0] = sizeof(inbuf);
+	incounts[1] = 0;
+	spin_lock_irqsave(&spi_eeprom_lock, flags);
+	stat = spi_eeprom_io(chipid, inbufs, incounts, NULL, NULL);
+	spin_unlock_irqrestore(&spi_eeprom_lock, flags);
+	return stat;
+}
+
+static int spi_eeprom_read_status_nolock(int chipid)
+{
+	unsigned char inbuf[2], outbuf[2];
+	unsigned char *inbufs[1], *outbufs[1];
+	unsigned int incounts[2], outcounts[2];
+	int stat;
+	inbuf[0] = ATMEL_RDSR;
+	inbuf[1] = 0;
+	inbufs[0] = inbuf;
+	incounts[0] = sizeof(inbuf);
+	incounts[1] = 0;
+	outbufs[0] = outbuf;
+	outcounts[0] = sizeof(outbuf);
+	outcounts[1] = 0;
+	stat = spi_eeprom_io(chipid, inbufs, incounts, outbufs, outcounts);
+	if (stat < 0)
+		return stat;
+	return outbuf[1];
+}
+
+int spi_eeprom_read_status(int chipid)
+{
+	unsigned long flags;
+	int stat;
+	spin_lock_irqsave(&spi_eeprom_lock, flags);
+	stat = spi_eeprom_read_status_nolock(chipid);
+	spin_unlock_irqrestore(&spi_eeprom_lock, flags);
+	return stat;
+}
+
+int spi_eeprom_read(int chipid, int address, unsigned char *buf, int len)
+{
+	unsigned char inbuf[2];
+	unsigned char *inbufs[2], *outbufs[2];
+	unsigned int incounts[2], outcounts[3];
+	unsigned long flags;
+	int stat;
+	inbuf[0] = ATMEL_READ;
+	inbuf[1] = address;
+	inbufs[0] = inbuf;
+	inbufs[1] = NULL;
+	incounts[0] = sizeof(inbuf);
+	incounts[1] = 0;
+	outbufs[0] = NULL;
+	outbufs[1] = buf;
+	outcounts[0] = 2;
+	outcounts[1] = len;
+	outcounts[2] = 0;
+	spin_lock_irqsave(&spi_eeprom_lock, flags);
+	stat = spi_eeprom_io(chipid, inbufs, incounts, outbufs, outcounts);
+	spin_unlock_irqrestore(&spi_eeprom_lock, flags);
+	return stat;
+}
+
+int spi_eeprom_write(int chipid, int address, unsigned char *buf, int len)
+{
+	unsigned char inbuf[2];
+	unsigned char *inbufs[2];
+	unsigned int incounts[3];
+	unsigned long flags;
+	int i, stat;
+
+	if (address / 8 != (address + len - 1) / 8)
+		return -EINVAL;
+	stat = spi_eeprom_write_enable(chipid, 1);
+	if (stat < 0)
+		return stat;
+	stat = spi_eeprom_read_status(chipid);
+	if (stat < 0)
+		return stat;
+	if (!(stat & ATMEL_SR_WEN))
+		return -EPERM;
+
+	inbuf[0] = ATMEL_WRITE;
+	inbuf[1] = address;
+	inbufs[0] = inbuf;
+	inbufs[1] = buf;
+	incounts[0] = sizeof(inbuf);
+	incounts[1] = len;
+	incounts[2] = 0;
+	spin_lock_irqsave(&spi_eeprom_lock, flags);
+	stat = spi_eeprom_io(chipid, inbufs, incounts, NULL, NULL);
+	if (stat < 0)
+		goto unlock_return;
+
+	/* write start.  max 10ms */
+	for (i = 10; i > 0; i--) {
+		int stat = spi_eeprom_read_status_nolock(chipid);
+		if (stat < 0)
+			goto unlock_return;
+		if (!(stat & ATMEL_SR_BSY))
+			break;
+		mdelay(1);
+	}
+	spin_unlock_irqrestore(&spi_eeprom_lock, flags);
+	if (i == 0)
+		return -EIO;
+	return len;
+ unlock_return:
+	spin_unlock_irqrestore(&spi_eeprom_lock, flags);
+	return stat;
+}
+
+#ifdef CONFIG_PROC_FS
+#define MAX_SIZE	0x80	/* for ATMEL 25010 */
+static int spi_eeprom_read_proc(char *page, char **start, off_t off,
+				int count, int *eof, void *data)
+{
+	unsigned int size = MAX_SIZE;
+	if (spi_eeprom_read((int)data, 0, (unsigned char *)page, size) < 0)
+		size = 0;
+	return size;
+}
+
+static int spi_eeprom_write_proc(struct file *file, const char *buffer,
+				 unsigned long count, void *data)
+{
+	unsigned int size = MAX_SIZE;
+	int i;
+	if (file->f_pos >= size)
+		return -EIO;
+	if (file->f_pos + count > size)
+		count = size - file->f_pos;
+	for (i = 0; i < count; i += 8) {
+		int len = count - i < 8 ? count - i : 8;
+		if (spi_eeprom_write((int)data, file->f_pos,
+				     (unsigned char *)buffer, len) < 0) {
+			count = -EIO;
+			break;
+		}
+		buffer += len;
+		file->f_pos += len;
+	}
+	return count;
+}
+
+__init void spi_eeprom_proc_create(struct proc_dir_entry *dir, int chipid)
+{
+	struct proc_dir_entry *entry;
+	char name[128];
+	sprintf(name, "seeprom-%d", chipid);
+	entry = create_proc_entry(name, 0600, dir);
+	if (entry) {
+		entry->read_proc = spi_eeprom_read_proc;
+		entry->write_proc = spi_eeprom_write_proc;
+		entry->data = (void *)chipid;
+	}
+}
+#endif /* CONFIG_PROC_FS */
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/spi_txx9.c b/arch/mips/tx4938/toshiba_rbtx4938/spi_txx9.c
new file mode 100644
index 000000000000..fae3136f462d
--- /dev/null
+++ b/arch/mips/tx4938/toshiba_rbtx4938/spi_txx9.c
@@ -0,0 +1,159 @@
+/*
+ * linux/arch/mips/tx4938/toshiba_rbtx4938/spi_txx9.c
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <asm/tx4938/spi.h>
+#include <asm/tx4938/tx4938.h>
+
+static int (*txx9_spi_cs_func)(int chipid, int on);
+static DEFINE_SPINLOCK(txx9_spi_lock);
+
+extern unsigned int txx9_gbus_clock;
+
+#define SPI_FIFO_SIZE	4
+
+void __init txx9_spi_init(unsigned long base, int (*cs_func)(int chipid, int on))
+{
+	txx9_spi_cs_func = cs_func;
+	/* enter config mode */
+	tx4938_spiptr->mcr = TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR;
+}
+
+static DECLARE_WAIT_QUEUE_HEAD(txx9_spi_wait);
+static void txx9_spi_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	/* disable rx intr */
+	tx4938_spiptr->cr0 &= ~TXx9_SPCR0_RBSIE;
+	wake_up(&txx9_spi_wait);
+}
+static struct irqaction txx9_spi_action = {
+	txx9_spi_interrupt, 0, 0, "spi", NULL, NULL,
+};
+
+void __init txx9_spi_irqinit(int irc_irq)
+{
+	setup_irq(irc_irq, &txx9_spi_action);
+}
+
+int txx9_spi_io(int chipid, struct spi_dev_desc *desc,
+		unsigned char **inbufs, unsigned int *incounts,
+		unsigned char **outbufs, unsigned int *outcounts,
+		int cansleep)
+{
+	unsigned int incount, outcount;
+	unsigned char *inp, *outp;
+	int ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&txx9_spi_lock, flags);
+	if ((tx4938_spiptr->mcr & TXx9_SPMCR_OPMODE) == TXx9_SPMCR_ACTIVE) {
+		spin_unlock_irqrestore(&txx9_spi_lock, flags);
+		return -EBUSY;
+	}
+	/* enter config mode */
+	tx4938_spiptr->mcr = TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR;
+	tx4938_spiptr->cr0 =
+		(desc->byteorder ? TXx9_SPCR0_SBOS : 0) |
+		(desc->polarity ? TXx9_SPCR0_SPOL : 0) |
+		(desc->phase ? TXx9_SPCR0_SPHA : 0) |
+		0x08;
+	tx4938_spiptr->cr1 =
+		(((TXX9_IMCLK + desc->baud) / (2 * desc->baud) - 1) << 8) |
+		0x08 /* 8 bit only */;
+	/* enter active mode */
+	tx4938_spiptr->mcr = TXx9_SPMCR_ACTIVE;
+	spin_unlock_irqrestore(&txx9_spi_lock, flags);
+
+	/* CS ON */
+	if ((ret = txx9_spi_cs_func(chipid, 1)) < 0) {
+		spin_unlock_irqrestore(&txx9_spi_lock, flags);
+		return ret;
+	}
+	udelay(desc->tcss);
+
+	/* do scatter IO */
+	inp = inbufs ? *inbufs : NULL;
+	outp = outbufs ? *outbufs : NULL;
+	incount = 0;
+	outcount = 0;
+	while (1) {
+		unsigned char data;
+		unsigned int count;
+		int i;
+		if (!incount) {
+			incount = incounts ? *incounts++ : 0;
+			inp = (incount && inbufs) ? *inbufs++ : NULL;
+		}
+		if (!outcount) {
+			outcount = outcounts ? *outcounts++ : 0;
+			outp = (outcount && outbufs) ? *outbufs++ : NULL;
+		}
+		if (!inp && !outp)
+			break;
+		count = SPI_FIFO_SIZE;
+		if (incount)
+			count = min(count, incount);
+		if (outcount)
+			count = min(count, outcount);
+
+		/* now tx must be idle... */
+		while (!(tx4938_spiptr->sr & TXx9_SPSR_SIDLE))
+			;
+
+		tx4938_spiptr->cr0 =
+			(tx4938_spiptr->cr0 & ~TXx9_SPCR0_RXIFL_MASK) |
+			((count - 1) << 12);
+		if (cansleep) {
+			/* enable rx intr */
+			tx4938_spiptr->cr0 |= TXx9_SPCR0_RBSIE;
+		}
+		/* send */
+		for (i = 0; i < count; i++)
+			tx4938_spiptr->dr = inp ? *inp++ : 0;
+		/* wait all rx data */
+		if (cansleep) {
+			wait_event(txx9_spi_wait,
+				   tx4938_spiptr->sr & TXx9_SPSR_SRRDY);
+		} else {
+			while (!(tx4938_spiptr->sr & TXx9_SPSR_RBSI))
+				;
+		}
+		/* receive */
+		for (i = 0; i < count; i++) {
+			data = tx4938_spiptr->dr;
+			if (outp)
+				*outp++ = data;
+		}
+		if (incount)
+			incount -= count;
+		if (outcount)
+			outcount -= count;
+	}
+
+	/* CS OFF */
+	udelay(desc->tcsh);
+	txx9_spi_cs_func(chipid, 0);
+	udelay(desc->tcsr);
+
+	spin_lock_irqsave(&txx9_spi_lock, flags);
+	/* enter config mode */
+	tx4938_spiptr->mcr = TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR;
+	spin_unlock_irqrestore(&txx9_spi_lock, flags);
+
+	return 0;
+}
diff --git a/arch/mips/vr41xx/Kconfig b/arch/mips/vr41xx/Kconfig
new file mode 100644
index 000000000000..a7add16c9aa4
--- /dev/null
+++ b/arch/mips/vr41xx/Kconfig
@@ -0,0 +1,88 @@
+config CASIO_E55
+	bool "Support for CASIO CASSIOPEIA E-10/15/55/65"
+	depends on MACH_VR41XX
+	select DMA_NONCOHERENT
+	select IRQ_CPU
+	select ISA
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config IBM_WORKPAD
+	bool "Support for IBM WorkPad z50"
+	depends on MACH_VR41XX
+	select DMA_NONCOHERENT
+	select IRQ_CPU
+	select ISA
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config NEC_CMBVR4133
+	bool "Support for NEC CMB-VR4133"
+	depends on MACH_VR41XX
+	select CPU_VR41XX
+	select DMA_NONCOHERENT
+	select IRQ_CPU
+	select HW_HAS_PCI
+
+config ROCKHOPPER
+	bool "Support for Rockhopper baseboard"
+	depends on NEC_CMBVR4133
+	select I8259
+	select HAVE_STD_PC_SERIAL_PORT
+
+config TANBAC_TB022X
+	bool "Support for TANBAC VR4131 multichip module and TANBAC VR4131DIMM"
+	depends on MACH_VR41XX
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select IRQ_CPU
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	help
+	  The TANBAC VR4131 multichip module(TB0225) and
+	  the TANBAC VR4131DIMM(TB0229) are MIPS-based platforms
+	  manufactured by TANBAC.
+	  Please refer to <http://www.tanbac.co.jp/>
+	  about VR4131 multichip module and VR4131DIMM.
+
+config TANBAC_TB0226
+	bool "Support for TANBAC Mbase(TB0226)"
+	depends on TANBAC_TB022X
+	select GPIO_VR41XX
+	help
+	  The TANBAC Mbase(TB0226) is a MIPS-based platform
+	  manufactured by TANBAC.
+	  Please refer to <http://www.tanbac.co.jp/> about Mbase.
+
+config TANBAC_TB0287
+	bool "Support for TANBAC Mini-ITX DIMM base(TB0287)"
+	depends on TANBAC_TB022X
+	help
+	  The TANBAC Mini-ITX DIMM base(TB0287) is a MIPS-based platform
+	  manufactured by TANBAC.
+	  Please refer to <http://www.tanbac.co.jp/> about Mini-ITX DIMM base.
+
+config VICTOR_MPC30X
+	bool "Support for Victor MP-C303/304"
+	depends on MACH_VR41XX
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select IRQ_CPU
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config ZAO_CAPCELLA
+	bool "Support for ZAO Networks Capcella"
+	depends on MACH_VR41XX
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select IRQ_CPU
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config PCI_VR41XX
+	bool "Add PCI control unit support of NEC VR4100 series"
+	depends on MACH_VR41XX && HW_HAS_PCI
+	default y
+	select PCI
+
+config VRC4173
+	tristate "Add NEC VRC4173 companion chip support"
+	depends on MACH_VR41XX && PCI_VR41XX
+	help
+	  The NEC VRC4173 is a companion chip for NEC VR4122/VR4131.
diff --git a/arch/mips/vr41xx/common/cmu.c b/arch/mips/vr41xx/common/cmu.c
index fcd3cb8cdd9d..d758e432961b 100644
--- a/arch/mips/vr41xx/common/cmu.c
+++ b/arch/mips/vr41xx/common/cmu.c
@@ -69,7 +69,7 @@
 
 static void __iomem *cmu_base;
 static uint16_t cmuclkmsk, cmuclkmsk2;
-static spinlock_t cmu_lock;
+static DEFINE_SPINLOCK(cmu_lock);
 
 #define cmu_read(offset)		readw(cmu_base + (offset))
 #define cmu_write(offset, value)	writew((value), cmu_base + (offset))
diff --git a/arch/mips/vr41xx/common/init.c b/arch/mips/vr41xx/common/init.c
index e03be896cbc4..578f6496ffd4 100644
--- a/arch/mips/vr41xx/common/init.c
+++ b/arch/mips/vr41xx/common/init.c
@@ -58,6 +58,14 @@ static void __init timer_init(void)
 	board_timer_setup = setup_timer_irq;
 }
 
+void __init plat_setup(void)
+{
+	vr41xx_calculate_clock_frequency();
+
+	timer_init();
+	iomem_resource_init();
+}
+
 void __init prom_init(void)
 {
 	int argc, i;
@@ -71,12 +79,6 @@ void __init prom_init(void)
 		if (i < (argc - 1))
 			strcat(arcs_cmdline, " ");
 	}
-
-	vr41xx_calculate_clock_frequency();
-
-	timer_init();
-
-	iomem_resource_init();
 }
 
 unsigned long __init prom_free_prom_memory (void)
diff --git a/arch/mips/vr41xx/common/vrc4173.c b/arch/mips/vr41xx/common/vrc4173.c
index ba58764ef8ea..462a9af30eef 100644
--- a/arch/mips/vr41xx/common/vrc4173.c
+++ b/arch/mips/vr41xx/common/vrc4173.c
@@ -81,8 +81,8 @@ EXPORT_SYMBOL(vrc4173_io_offset);
 static int vrc4173_initialized;
 static uint16_t vrc4173_cmuclkmsk;
 static uint16_t vrc4173_selectreg;
-static spinlock_t vrc4173_cmu_lock;
-static spinlock_t vrc4173_giu_lock;
+static DEFINE_SPINLOCK(vrc4173_cmu_lock);
+static DEFINE_SPINLOCK(vrc4173_giu_lock);
 
 static inline void set_cmusrst(uint16_t val)
 {
diff --git a/arch/mips/vr41xx/nec-cmbvr4133/setup.c b/arch/mips/vr41xx/nec-cmbvr4133/setup.c
index db686ce42e85..53272a5c3cbe 100644
--- a/arch/mips/vr41xx/nec-cmbvr4133/setup.c
+++ b/arch/mips/vr41xx/nec-cmbvr4133/setup.c
@@ -56,7 +56,7 @@ static struct mtd_partition cmbvr4133_mtd_parts[] = {
 
 extern void i8259_init(void);
 
-static int __init nec_cmbvr4133_setup(void)
+static void __init nec_cmbvr4133_setup(void)
 {
 #ifdef CONFIG_ROCKHOPPER
 	extern void disable_pcnet(void);
@@ -90,7 +90,4 @@ static int __init nec_cmbvr4133_setup(void)
 #ifdef CONFIG_ROCKHOPPER
 	i8259_init();
 #endif
-	return 0;
 }
-
-early_initcall(nec_cmbvr4133_setup);
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 0b07922a2ac6..874a283edb95 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -47,10 +47,10 @@ config PM
 
 config ISA_DMA_API
 	bool
-	default y
 
 config ARCH_MAY_HAVE_PC_FDC
 	bool
+	depends on BROKEN
 	default y
 
 source "init/Kconfig"
@@ -154,13 +154,14 @@ config HOTPLUG_CPU
 
 config ARCH_DISCONTIGMEM_ENABLE
 	bool "Discontiguous memory support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	depends on 64BIT && EXPERIMENTAL
 	help
 	  Say Y to support efficient handling of discontiguous physical memory,
 	  for architectures which are either NUMA (Non-Uniform Memory Access)
 	  or have huge holes in the physical address space for other reasons.
 	  See <file:Documentation/vm/numa> for more.
 
+source "kernel/Kconfig.hz"
 source "mm/Kconfig"
 
 config PREEMPT
diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile
index 3b339b1cce13..9b7e42490dd1 100644
--- a/arch/parisc/Makefile
+++ b/arch/parisc/Makefile
@@ -20,7 +20,8 @@ NM		= sh $(srctree)/arch/parisc/nm
 CHECKFLAGS	+= -D__hppa__=1
 
 ifdef CONFIG_64BIT
-CROSS_COMPILE	:= hppa64-linux-
+CROSS_COMPILE	:= $(shell if [ -x /usr/bin/hppa64-linux-gnu-gcc ]; then \
+			echo hppa64-linux-gnu-; else echo hppa64-linux-; fi)
 UTS_MACHINE	:= parisc64
 CHECKFLAGS	+= -D__LP64__=1 -m64
 else
@@ -34,6 +35,14 @@ FINAL_LD=$(CROSS_COMPILE)ld --warn-common --warn-section-align
 
 OBJCOPY_FLAGS =-O binary -R .note -R .comment -S
 
+GCC_VERSION     := $(call cc-version)
+ifneq ($(shell if [ -z $(GCC_VERSION) ] ; then echo "bad"; fi ;),)
+$(error Sorry, couldn't find ($(cc-version)).)
+endif
+ifneq ($(shell if [ $(GCC_VERSION) -lt 0303 ] ; then echo "bad"; fi ;),)
+$(error Sorry, your compiler is too old ($(GCC_VERSION)).  GCC v3.3 or above is required.)
+endif
+
 cflags-y	:= -pipe
 
 # These flags should be implied by an hppa-linux configuration, but they
@@ -43,7 +52,7 @@ cflags-y	+= -mno-space-regs -mfast-indirect-calls
 # Currently we save and restore fpregs on all kernel entry/interruption paths.
 # If that gets optimized, we might need to disable the use of fpregs in the
 # kernel.
-#cflags-y	+= -mdisable-fpregs
+cflags-y	+= -mdisable-fpregs
 
 # Without this, "ld -r" results in .text sections that are too big
 # (> 0x40000) for branches to reach stubs.
diff --git a/arch/parisc/configs/712_defconfig b/arch/parisc/configs/712_defconfig
index 6efaa9293eef..3e013f55df64 100644
--- a/arch/parisc/configs/712_defconfig
+++ b/arch/parisc/configs/712_defconfig
@@ -1,12 +1,16 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-pa5
-# Wed Jan  5 13:20:32 2005
+# Linux kernel version: 2.6.14-rc5-pa1
+# Fri Oct 21 23:04:34 2005
 #
 CONFIG_PARISC=y
 CONFIG_MMU=y
 CONFIG_STACK_GROWSUP=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 
 #
 # Code maturity level options
@@ -15,35 +19,40 @@ CONFIG_EXPERIMENTAL=y
 # CONFIG_CLEAN_COMPILE is not set
 CONFIG_BROKEN=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -65,9 +74,18 @@ CONFIG_PA7100LC=y
 # CONFIG_PA7300LC is not set
 # CONFIG_PA8X00 is not set
 CONFIG_PA11=y
-# CONFIG_64BIT is not set
 # CONFIG_SMP is not set
-# CONFIG_DISCONTIGMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_HPUX is not set
 
@@ -81,8 +99,6 @@ CONFIG_GSC_LASI=y
 # CONFIG_GSC_WAX is not set
 # CONFIG_EISA is not set
 # CONFIG_PCI is not set
-CONFIG_CHASSIS_LCD_LED=y
-# CONFIG_PDC_CHASSIS is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -90,12 +106,15 @@ CONFIG_CHASSIS_LCD_LED=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
+# PCI Hotplug Support
 #
 
 #
-# PCI Hotplug Support
+# PA-RISC specific drivers
 #
+CONFIG_CHASSIS_LCD_LED=y
+# CONFIG_PDC_CHASSIS is not set
+CONFIG_PDC_STABLE=y
 
 #
 # Executable file formats
@@ -104,137 +123,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_PC_CML1=m
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-CONFIG_PARPORT_GSC=y
-# CONFIG_PARPORT_OTHER is not set
-# CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_PARIDE is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=6144
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-CONFIG_SCSI_LASI700=y
-CONFIG_53C700_MEM_MAPPED=y
-CONFIG_53C700_LE_ON_BE=y
-# CONFIG_SCSI_ZALON is not set
-CONFIG_SCSI_DEBUG=m
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_RAID6 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
-# CONFIG_BLK_DEV_DM is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -243,12 +132,14 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
 CONFIG_NET_KEY=m
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -262,8 +153,10 @@ CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 # CONFIG_INET_IPCOMP is not set
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
 
 #
 # IP: Virtual Server Configuration
@@ -272,6 +165,7 @@ CONFIG_IP_TCPDIAG=y
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
 
 #
 # IP: Netfilter Configuration
@@ -279,11 +173,14 @@ CONFIG_NETFILTER=y
 CONFIG_IP_NF_CONNTRACK=m
 # CONFIG_IP_NF_CT_ACCT is not set
 CONFIG_IP_NF_CONNTRACK_MARK=y
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
 CONFIG_IP_NF_CT_PROTO_SCTP=m
 CONFIG_IP_NF_FTP=m
 CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_LIMIT=m
@@ -307,21 +204,23 @@ CONFIG_IP_NF_MATCH_OWNER=m
 # CONFIG_IP_NF_MATCH_ADDRTYPE is not set
 # CONFIG_IP_NF_MATCH_REALM is not set
 CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
 CONFIG_IP_NF_MATCH_COMMENT=m
 CONFIG_IP_NF_MATCH_CONNMARK=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
+# CONFIG_IP_NF_MATCH_STRING is not set
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_SAME=m
-# CONFIG_IP_NF_NAT_LOCAL is not set
 CONFIG_IP_NF_NAT_SNMP_BASIC=m
 CONFIG_IP_NF_NAT_IRC=m
 CONFIG_IP_NF_NAT_FTP=m
@@ -333,6 +232,7 @@ CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_DSCP=m
 CONFIG_IP_NF_TARGET_MARK=m
 CONFIG_IP_NF_TARGET_CLASSIFY=m
+# CONFIG_IP_NF_TARGET_TTL is not set
 CONFIG_IP_NF_TARGET_CONNMARK=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
@@ -340,10 +240,11 @@ CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
-# CONFIG_IP_NF_COMPAT_IPFWADM is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
 
 #
 # SCTP Configuration (EXPERIMENTAL)
@@ -362,10 +263,6 @@ CONFIG_LLC2=m
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -373,17 +270,162 @@ CONFIG_LLC2=m
 # Network testing
 #
 CONFIG_NET_PKTGEN=m
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+CONFIG_PARPORT=y
+CONFIG_PARPORT_PC=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_GSC=y
+# CONFIG_PARPORT_1284 is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_PARIDE is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=6144
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=m
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_PPA is not set
+# CONFIG_SCSI_IMM is not set
+CONFIG_SCSI_LASI700=y
+CONFIG_53C700_LE_ON_BE=y
+# CONFIG_SCSI_ZALON is not set
+CONFIG_SCSI_DEBUG=m
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+# CONFIG_MD_RAID5 is not set
+# CONFIG_MD_RAID6 is not set
+# CONFIG_MD_MULTIPATH is not set
+# CONFIG_MD_FAULTY is not set
+# CONFIG_BLK_DEV_DM is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_ETHERTAP is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -391,6 +433,7 @@ CONFIG_TUN=m
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 CONFIG_LASI_82596=y
+# CONFIG_NET_POCKET is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -414,6 +457,7 @@ CONFIG_NET_RADIO=y
 #
 # CONFIG_STRIP is not set
 # CONFIG_ATMEL is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Wan interfaces
@@ -431,6 +475,8 @@ CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -460,19 +506,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_GSCPS2=y
-CONFIG_HP_SDC=y
-CONFIG_HIL_MLC=y
-# CONFIG_SERIO_RAW is not set
-
-#
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
@@ -483,6 +516,7 @@ CONFIG_KEYBOARD_ATKBD_HP_KEYCODES=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_HIL_OLD=y
 # CONFIG_KEYBOARD_HIL is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
@@ -494,6 +528,19 @@ CONFIG_MOUSE_HIL=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PARKBD is not set
+CONFIG_SERIO_GSCPS2=y
+CONFIG_HP_SDC=y
+CONFIG_HIL_MLC=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -511,7 +558,6 @@ CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
 # CONFIG_SERIAL_8250_RSA is not set
 
 #
@@ -546,12 +592,14 @@ CONFIG_GEN_RTC_X=y
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=256
 
 #
+# TPM devices
+#
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -562,10 +610,20 @@ CONFIG_MAX_RAW_DEVS=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -579,28 +637,36 @@ CONFIG_MAX_RAW_DEVS=256
 # Graphics support
 #
 CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 CONFIG_FB_STI=y
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
 # Console display driver support
 #
-CONFIG_STI_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
 CONFIG_DUMMY_CONSOLE_COLUMNS=128
 CONFIG_DUMMY_CONSOLE_ROWS=48
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_STI_CONSOLE=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 # CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
 # CONFIG_FONT_PEARL_8x8 is not set
 # CONFIG_FONT_ACORN_8x8 is not set
 # CONFIG_FONT_MINI_4x6 is not set
 # CONFIG_FONT_SUN8x16 is not set
 # CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
 
 #
 # Logo configuration
@@ -610,6 +676,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 CONFIG_LOGO_PARISC_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -657,10 +724,6 @@ CONFIG_SND_HARMONY=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
@@ -671,10 +734,20 @@ CONFIG_SND_HARMONY=y
 # CONFIG_MMC is not set
 
 #
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_JBD=y
@@ -682,20 +755,24 @@ CONFIG_JBD=y
 # CONFIG_REISERFS_FS is not set
 CONFIG_JFS_FS=m
 # CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
+CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -722,14 +799,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-# CONFIG_TMPFS_SECURITY is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -754,16 +828,19 @@ CONFIG_UFS_FS=m
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 CONFIG_NFS_DIRECTIO=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
 CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
@@ -778,6 +855,7 @@ CONFIG_CIFS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -838,13 +916,19 @@ CONFIG_OPROFILE=m
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_IOREMAP is not set
+# CONFIG_DEBUG_FS is not set
 
 #
 # Security options
@@ -865,6 +949,7 @@ CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
@@ -882,9 +967,14 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_TEST=m
 
 #
+# Hardware crypto devices
+#
+
+#
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
diff --git a/arch/parisc/configs/a500_defconfig b/arch/parisc/configs/a500_defconfig
index 30fc03ed0cfb..955ef5084f3e 100644
--- a/arch/parisc/configs/a500_defconfig
+++ b/arch/parisc/configs/a500_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc4-pa1
-# Wed Feb 16 11:32:49 2005
+# Linux kernel version: 2.6.14-rc5-pa1
+# Fri Oct 21 23:04:54 2005
 #
 CONFIG_PARISC=y
 CONFIG_MMU=y
@@ -10,6 +10,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 
 #
 # Code maturity level options
@@ -19,26 +20,32 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -48,6 +55,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -74,7 +82,19 @@ CONFIG_PREFETCH=y
 CONFIG_64BIT=y
 CONFIG_SMP=y
 CONFIG_HOTPLUG_CPU=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_PREEMPT is not set
 CONFIG_COMPAT=y
 CONFIG_NR_CPUS=8
@@ -85,7 +105,7 @@ CONFIG_NR_CPUS=8
 # CONFIG_GSC is not set
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 CONFIG_PCI_LBA=y
 CONFIG_IOSAPIC=y
 CONFIG_IOMMU_SBA=y
@@ -96,6 +116,8 @@ CONFIG_IOMMU_SBA=y
 CONFIG_PCCARD=m
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=m
+# CONFIG_PCMCIA_LOAD_CIS is not set
+CONFIG_PCMCIA_IOCTL=y
 CONFIG_CARDBUS=y
 
 #
@@ -104,7 +126,6 @@ CONFIG_CARDBUS=y
 CONFIG_YENTA=m
 CONFIG_PD6729=m
 CONFIG_I82092=m
-CONFIG_TCIC=m
 CONFIG_PCCARD_NONSTATIC=m
 
 #
@@ -127,6 +148,203 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+CONFIG_IP_NF_CONNTRACK_MARK=y
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+CONFIG_IP_NF_CT_PROTO_SCTP=m
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_REALM is not set
+CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
+CONFIG_IP_NF_MATCH_COMMENT=m
+CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
+# CONFIG_IP_NF_MATCH_STRING is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+# CONFIG_IP_NF_TARGET_TTL is not set
+CONFIG_IP_NF_TARGET_CONNMARK=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_TARGET_NOTRACK=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+CONFIG_IP6_NF_IPTABLES=m
+# CONFIG_IP6_NF_MATCH_LIMIT is not set
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+# CONFIG_IP6_NF_MATCH_MULTIPORT is not set
+# CONFIG_IP6_NF_MATCH_OWNER is not set
+# CONFIG_IP6_NF_MATCH_MARK is not set
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+# CONFIG_IP6_NF_MATCH_AHESP is not set
+# CONFIG_IP6_NF_MATCH_LENGTH is not set
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP6_NF_TARGET_MARK is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+CONFIG_IP6_NF_RAW=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID3 is not set
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+CONFIG_LLC2=m
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
 # Device Drivers
 #
 
@@ -139,6 +357,11 @@ CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -169,7 +392,6 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=6144
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
 
 #
@@ -189,6 +411,7 @@ CONFIG_IOSCHED_CFQ=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -201,6 +424,7 @@ CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -215,6 +439,7 @@ CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_FC_ATTRS=m
 CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
 
 #
 # SCSI low-level drivers
@@ -229,14 +454,12 @@ CONFIG_SCSI_ISCSI_ATTRS=m
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_CPQFCTS is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
@@ -246,8 +469,6 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PCI2000 is not set
-# CONFIG_SCSI_PCI2220I is not set
 # CONFIG_SCSI_QLOGIC_ISP is not set
 CONFIG_SCSI_QLOGIC_FC=m
 # CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
@@ -258,7 +479,9 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_SCSI_QLA22XX is not set
 CONFIG_SCSI_QLA2300=m
 CONFIG_SCSI_QLA2322=m
-CONFIG_SCSI_QLA6312=m
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 CONFIG_SCSI_DEBUG=m
@@ -288,8 +511,11 @@ CONFIG_MD_RAID1=y
 #
 # Fusion MPT device support
 #
-CONFIG_FUSION=m
-CONFIG_FUSION_MAX_SGE=40
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=m
+CONFIG_FUSION_FC=m
+# CONFIG_FUSION_SAS is not set
+CONFIG_FUSION_MAX_SGE=128
 CONFIG_FUSION_CTL=m
 
 #
@@ -303,153 +529,13 @@ CONFIG_FUSION_CTL=m
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
+# Network device support
 #
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-CONFIG_IP_NF_MATCH_SCTP=m
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-CONFIG_LLC2=m
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-CONFIG_NET_PKTGEN=m
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -457,12 +543,18 @@ CONFIG_TUN=m
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 CONFIG_NET_VENDOR_3COM=y
 CONFIG_VORTEX=m
 CONFIG_TYPHOON=m
@@ -479,6 +571,7 @@ CONFIG_TULIP_MMIO=y
 # CONFIG_DE4X5 is not set
 # CONFIG_WINBOND_840 is not set
 # CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
 CONFIG_PCMCIA_XIRCOM=m
 # CONFIG_PCMCIA_XIRTULIP is not set
 CONFIG_HP100=m
@@ -489,48 +582,43 @@ CONFIG_PCNET32=m
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 # CONFIG_DGRS is not set
-CONFIG_EEPRO100=m
+# CONFIG_EEPRO100 is not set
 CONFIG_E100=m
-CONFIG_E100_NAPI=y
 # CONFIG_FEALNX is not set
-CONFIG_NATSEMI=m
+# CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
-CONFIG_8139TOO=m
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_8139TOO is not set
 # CONFIG_SIS900 is not set
-CONFIG_EPIC100=m
+# CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
-CONFIG_VIA_RHINE=m
-CONFIG_VIA_RHINE_MMIO=y
+# CONFIG_VIA_RHINE is not set
 
 #
 # Ethernet (1000 Mbit)
 #
 CONFIG_ACENIC=m
 CONFIG_ACENIC_OMIT_TIGON_I=y
-CONFIG_DL2K=m
+# CONFIG_DL2K is not set
 CONFIG_E1000=m
 CONFIG_E1000_NAPI=y
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=m
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
-CONFIG_IXGB=m
-CONFIG_IXGB_NAPI=y
-CONFIG_S2IO=m
-CONFIG_S2IO_NAPI=y
-# CONFIG_2BUFF_MODE is not set
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
 
 #
 # Token Ring devices
@@ -560,6 +648,7 @@ CONFIG_PCMCIA_RAYCS=m
 CONFIG_HERMES=m
 CONFIG_PLX_HERMES=m
 CONFIG_TMD_HERMES=m
+# CONFIG_NORTEL_HERMES is not set
 CONFIG_PCI_HERMES=m
 # CONFIG_ATMEL is not set
 
@@ -567,6 +656,7 @@ CONFIG_PCI_HERMES=m
 # Wireless 802.11b Pcmcia/Cardbus cards support
 #
 CONFIG_PCMCIA_HERMES=m
+# CONFIG_PCMCIA_SPECTRUM is not set
 CONFIG_AIRO_CS=m
 CONFIG_PCMCIA_WL3501=m
 
@@ -574,6 +664,7 @@ CONFIG_PCMCIA_WL3501=m
 # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
 #
 # CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 CONFIG_NET_WIRELESS=y
 
 #
@@ -607,6 +698,8 @@ CONFIG_PPP_BSDCOMP=m
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -633,13 +726,6 @@ CONFIG_INPUT=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -649,6 +735,12 @@ CONFIG_SOUND_GAMEPORT=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -667,7 +759,6 @@ CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
 # CONFIG_SERIAL_8250_RSA is not set
 
 #
@@ -677,6 +768,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_PDC_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 
@@ -708,6 +800,11 @@ CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=256
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -718,10 +815,20 @@ CONFIG_MAX_RAW_DEVS=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -742,6 +849,7 @@ CONFIG_MAX_RAW_DEVS=256
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_DUMMY_CONSOLE_COLUMNS=160
 CONFIG_DUMMY_CONSOLE_ROWS=64
+# CONFIG_STI_CONSOLE is not set
 
 #
 # Sound
@@ -751,13 +859,9 @@ CONFIG_DUMMY_CONSOLE_ROWS=64
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
 
 #
 # USB Gadget Support
@@ -772,17 +876,18 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 #
 # InfiniBand support
 #
-CONFIG_INFINIBAND=m
-CONFIG_INFINIBAND_MTHCA=m
-# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
-CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_JBD=y
@@ -794,22 +899,20 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
 CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -836,13 +939,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -867,15 +968,18 @@ CONFIG_UFS_FS=m
 #
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 CONFIG_NFS_DIRECTIO=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
 CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
 CONFIG_RPCSEC_GSS_KRB5=m
@@ -890,6 +994,7 @@ CONFIG_CIFS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -906,15 +1011,15 @@ CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
+# CONFIG_NLS_CODEPAGE_852 is not set
 # CONFIG_NLS_CODEPAGE_855 is not set
 # CONFIG_NLS_CODEPAGE_857 is not set
 # CONFIG_NLS_CODEPAGE_860 is not set
 # CONFIG_NLS_CODEPAGE_861 is not set
 # CONFIG_NLS_CODEPAGE_862 is not set
-CONFIG_NLS_CODEPAGE_863=m
+# CONFIG_NLS_CODEPAGE_863 is not set
 # CONFIG_NLS_CODEPAGE_864 is not set
-CONFIG_NLS_CODEPAGE_865=m
+# CONFIG_NLS_CODEPAGE_865 is not set
 # CONFIG_NLS_CODEPAGE_866 is not set
 # CONFIG_NLS_CODEPAGE_869 is not set
 # CONFIG_NLS_CODEPAGE_936 is not set
@@ -926,10 +1031,10 @@ CONFIG_NLS_CODEPAGE_865=m
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
 # CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
 # CONFIG_NLS_ISO8859_5 is not set
 # CONFIG_NLS_ISO8859_6 is not set
 # CONFIG_NLS_ISO8859_7 is not set
@@ -950,11 +1055,15 @@ CONFIG_OPROFILE=m
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_IOREMAP is not set
@@ -974,25 +1083,26 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
 CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_TEST=m
 
@@ -1004,6 +1114,7 @@ CONFIG_CRYPTO_TEST=m
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
diff --git a/arch/parisc/configs/b180_defconfig b/arch/parisc/configs/b180_defconfig
index 46c9511f3229..8819e7e6ae3f 100644
--- a/arch/parisc/configs/b180_defconfig
+++ b/arch/parisc/configs/b180_defconfig
@@ -1,12 +1,15 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-pa5
-# Wed Jan  5 13:35:54 2005
+# Linux kernel version: 2.6.14-rc5-pa1
+# Fri Oct 21 23:06:10 2005
 #
 CONFIG_PARISC=y
 CONFIG_MMU=y
 CONFIG_STACK_GROWSUP=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
 
 #
 # Code maturity level options
@@ -14,33 +17,39 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_EXPERIMENTAL is not set
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_HOTPLUG is not set
 CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -60,8 +69,14 @@ CONFIG_PA7100LC=y
 # CONFIG_PA7300LC is not set
 # CONFIG_PA8X00 is not set
 CONFIG_PA11=y
-# CONFIG_64BIT is not set
 # CONFIG_SMP is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_HPUX is not set
 
@@ -78,11 +93,25 @@ CONFIG_EISA_NAMES=y
 CONFIG_ISA=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 CONFIG_GSC_DINO=y
 # CONFIG_PCI_LBA is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+
+#
+# PA-RISC specific drivers
+#
 CONFIG_CHASSIS_LCD_LED=y
 # CONFIG_PDC_CHASSIS is not set
+CONFIG_PDC_STABLE=y
 
 #
 # Executable file formats
@@ -91,6 +120,64 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
 # Device Drivers
 #
 
@@ -99,9 +186,15 @@ CONFIG_BINFMT_ELF=y
 #
 CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -111,10 +204,8 @@ CONFIG_STANDALONE=y
 #
 CONFIG_PARPORT=y
 CONFIG_PARPORT_PC=y
-CONFIG_PARPORT_PC_CML1=y
 # CONFIG_PARPORT_SERIAL is not set
 CONFIG_PARPORT_GSC=y
-# CONFIG_PARPORT_OTHER is not set
 # CONFIG_PARPORT_1284 is not set
 
 #
@@ -125,19 +216,17 @@ CONFIG_PARPORT_GSC=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
 # CONFIG_PARIDE is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=y
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -149,6 +238,7 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=y
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -158,6 +248,7 @@ CONFIG_IOSCHED_CFQ=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -170,6 +261,7 @@ CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -183,16 +275,16 @@ CONFIG_CHR_DEV_SG=y
 #
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
 #
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_7000FASST is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
 # CONFIG_SCSI_AHA1740 is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -202,14 +294,11 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_IN2000 is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_GENERIC_NCR5380 is not set
 # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
 # CONFIG_SCSI_IPS is not set
@@ -219,7 +308,6 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_IMM is not set
 # CONFIG_SCSI_NCR53C406A is not set
 CONFIG_SCSI_LASI700=y
-CONFIG_53C700_MEM_MAPPED=y
 CONFIG_53C700_LE_ON_BE=y
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
@@ -231,7 +319,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 # CONFIG_SCSI_PAS16 is not set
 # CONFIG_SCSI_PSI240I is not set
 # CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 CONFIG_SCSI_QLA2XXX=y
@@ -240,12 +327,12 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_SCSI_QLA2300 is not set
 # CONFIG_SCSI_QLA2322 is not set
 # CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_SIM710 is not set
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 
@@ -263,6 +350,7 @@ CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID5=y
+CONFIG_MD_RAID6=y
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 # CONFIG_BLK_DEV_DM is not set
@@ -271,6 +359,9 @@ CONFIG_MD_RAID5=y
 # Fusion MPT device support
 #
 # CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -283,58 +374,8 @@ CONFIG_MD_RAID5=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
+# Network device support
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -347,6 +388,11 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -354,8 +400,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_LASI_82596 is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_NET_VENDOR_RACAL is not set
 
@@ -369,6 +415,7 @@ CONFIG_TULIP=y
 # CONFIG_DE4X5 is not set
 # CONFIG_WINBOND_840 is not set
 # CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
 # CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
 # CONFIG_NET_ISA is not set
@@ -384,12 +431,15 @@ CONFIG_TULIP=y
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -413,12 +463,12 @@ CONFIG_NET_RADIO=y
 #
 # Wireless 802.11b ISA/PCI cards support
 #
-# CONFIG_AIRO is not set
 # CONFIG_HERMES is not set
 
 #
 # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
 #
+# CONFIG_HOSTAP is not set
 CONFIG_NET_WIRELESS=y
 
 #
@@ -435,6 +485,8 @@ CONFIG_PPP=y
 # CONFIG_PPP_BSDCOMP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -464,23 +516,12 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_GSCPS2=y
-# CONFIG_HP_SDC is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_ATKBD_HP_KEYCODES=y
+# CONFIG_KEYBOARD_ATKBD_RDI_KEYCODES is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
@@ -488,7 +529,7 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_HIL_OLD is not set
 # CONFIG_KEYBOARD_HIL is not set
 CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
+CONFIG_MOUSE_PS2=y
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_INPORT is not set
 # CONFIG_MOUSE_LOGIBM is not set
@@ -502,6 +543,19 @@ CONFIG_INPUT_MISC=y
 # CONFIG_HP_SDC_RTC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PARKBD is not set
+CONFIG_SERIO_GSCPS2=y
+# CONFIG_HP_SDC is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -519,8 +573,11 @@ CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
 # CONFIG_SERIAL_8250_RSA is not set
+# CONFIG_SERIAL_8250_FOURPORT is not set
+# CONFIG_SERIAL_8250_ACCENT is not set
+# CONFIG_SERIAL_8250_BOCA is not set
+# CONFIG_SERIAL_8250_HUB6 is not set
 
 #
 # Non-8250 serial port support
@@ -529,6 +586,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_PDC_CONSOLE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -555,11 +613,14 @@ CONFIG_GEN_RTC=y
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_AGP is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -570,10 +631,20 @@ CONFIG_GEN_RTC=y
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -587,6 +658,11 @@ CONFIG_GEN_RTC=y
 # Graphics support
 #
 CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_CIRRUS is not set
@@ -595,6 +671,7 @@ CONFIG_FB=y
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
 CONFIG_FB_STI=y
+# CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
 # CONFIG_FB_RADEON_OLD is not set
@@ -606,18 +683,19 @@ CONFIG_FB_STI=y
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
 # Console display driver support
 #
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_STI_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
 CONFIG_DUMMY_CONSOLE_COLUMNS=160
 CONFIG_DUMMY_CONSOLE_ROWS=64
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_STI_CONSOLE=y
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
@@ -630,6 +708,7 @@ CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_LOGO_PARISC_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -639,13 +718,9 @@ CONFIG_LOGO_PARISC_CLUT224=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
 
 #
 # USB Gadget Support
@@ -658,23 +733,36 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_MMC is not set
 
 #
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -697,11 +785,10 @@ CONFIG_JOLIET=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -719,15 +806,19 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SMB_FS is not set
+CONFIG_SMB_FS=y
+# CONFIG_SMB_NLS_DEFAULT is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -785,13 +876,19 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_IOREMAP is not set
+# CONFIG_DEBUG_FS is not set
 
 #
 # Security options
@@ -815,6 +912,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
 # CONFIG_CRYPTO_DES is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
@@ -832,8 +930,13 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_TEST is not set
 
 #
+# Hardware crypto devices
+#
+
+#
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig
index 67aca6ccc9b0..9d86b6b1ebd1 100644
--- a/arch/parisc/configs/c3000_defconfig
+++ b/arch/parisc/configs/c3000_defconfig
@@ -1,12 +1,16 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-pa5
-# Wed Jan  5 13:26:49 2005
+# Linux kernel version: 2.6.14-rc5-pa1
+# Fri Oct 21 23:06:31 2005
 #
 CONFIG_PARISC=y
 CONFIG_MMU=y
 CONFIG_STACK_GROWSUP=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 
 #
 # Code maturity level options
@@ -15,26 +19,31 @@ CONFIG_EXPERIMENTAL=y
 # CONFIG_CLEAN_COMPILE is not set
 CONFIG_BROKEN=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -44,6 +53,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -66,10 +76,19 @@ CONFIG_KMOD=y
 CONFIG_PA8X00=y
 CONFIG_PA20=y
 CONFIG_PREFETCH=y
-# CONFIG_PARISC64 is not set
 # CONFIG_64BIT is not set
 # CONFIG_SMP is not set
-# CONFIG_DISCONTIGMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_HPUX is not set
 
@@ -79,13 +98,10 @@ CONFIG_PREFETCH=y
 # CONFIG_GSC is not set
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 CONFIG_PCI_LBA=y
 CONFIG_IOSAPIC=y
 CONFIG_IOMMU_SBA=y
-CONFIG_SUPERIO=y
-CONFIG_CHASSIS_LCD_LED=y
-# CONFIG_PDC_CHASSIS is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -93,13 +109,17 @@ CONFIG_CHASSIS_LCD_LED=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
+# PCI Hotplug Support
 #
+# CONFIG_HOTPLUG_PCI is not set
 
 #
-# PCI Hotplug Support
+# PA-RISC specific drivers
 #
-# CONFIG_HOTPLUG_PCI is not set
+CONFIG_SUPERIO=y
+CONFIG_CHASSIS_LCD_LED=y
+# CONFIG_PDC_CHASSIS is not set
+CONFIG_PDC_STABLE=y
 
 #
 # Executable file formats
@@ -108,6 +128,186 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+CONFIG_NETFILTER_DEBUG=y
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_REALM is not set
+# CONFIG_IP_NF_MATCH_SCTP is not set
+# CONFIG_IP_NF_MATCH_DCCP is not set
+# CONFIG_IP_NF_MATCH_COMMENT is not set
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+# CONFIG_IP_NF_MATCH_STRING is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_RAW is not set
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+CONFIG_IP6_NF_IPTABLES=m
+# CONFIG_IP6_NF_MATCH_LIMIT is not set
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+# CONFIG_IP6_NF_MATCH_OPTS is not set
+# CONFIG_IP6_NF_MATCH_FRAG is not set
+# CONFIG_IP6_NF_MATCH_HL is not set
+# CONFIG_IP6_NF_MATCH_MULTIPORT is not set
+CONFIG_IP6_NF_MATCH_OWNER=m
+# CONFIG_IP6_NF_MATCH_MARK is not set
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+# CONFIG_IP6_NF_MATCH_AHESP is not set
+CONFIG_IP6_NF_MATCH_LENGTH=m
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP6_NF_TARGET_MARK is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+# CONFIG_IP6_NF_RAW is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
 # Device Drivers
 #
 
@@ -120,6 +320,11 @@ CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -141,14 +346,14 @@ CONFIG_FW_LOADER=y
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_CRYPTOLOOP=m
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
 
 #
@@ -158,6 +363,7 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -201,6 +407,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
 CONFIG_BLK_DEV_NS87415=y
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
 # CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -218,6 +425,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -230,6 +438,7 @@ CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -242,7 +451,9 @@ CONFIG_SCSI_MULTI_LUN=y
 # SCSI Transport Attributes
 #
 CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=m
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
@@ -258,25 +469,26 @@ CONFIG_SCSI_FC_ATTRS=m
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 CONFIG_SCSI_SATA=y
 # CONFIG_SCSI_SATA_AHCI is not set
 # CONFIG_SCSI_SATA_SVW is not set
 CONFIG_SCSI_ATA_PIIX=m
+# CONFIG_SCSI_SATA_MV is not set
 # CONFIG_SCSI_SATA_NV is not set
 CONFIG_SCSI_SATA_PROMISE=m
+# CONFIG_SCSI_SATA_QSTOR is not set
 # CONFIG_SCSI_SATA_SX4 is not set
 CONFIG_SCSI_SATA_SIL=m
 # CONFIG_SCSI_SATA_SIS is not set
 # CONFIG_SCSI_SATA_ULI is not set
 CONFIG_SCSI_SATA_VIA=m
 # CONFIG_SCSI_SATA_VITESSE is not set
-# CONFIG_SCSI_BUSLOGIC is not set
+CONFIG_SCSI_SATA_INTEL_COMBINED=y
 # CONFIG_SCSI_CPQFCTS is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
@@ -286,20 +498,17 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PCI2000 is not set
-# CONFIG_SCSI_PCI2220I is not set
 # CONFIG_SCSI_QLOGIC_ISP is not set
-CONFIG_SCSI_QLOGIC_FC=m
-# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
-CONFIG_SCSI_QLOGIC_1280=m
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
 CONFIG_SCSI_QLA2XXX=y
 # CONFIG_SCSI_QLA21XX is not set
 # CONFIG_SCSI_QLA22XX is not set
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-CONFIG_SCSI_QLA6312=m
-CONFIG_SCSI_QLA6322=m
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
@@ -316,19 +525,24 @@ CONFIG_MD_RAID1=y
 # CONFIG_MD_RAID10 is not set
 # CONFIG_MD_RAID5 is not set
 # CONFIG_MD_RAID6 is not set
-CONFIG_MD_MULTIPATH=y
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_MULTIPATH_EMC is not set
 
 #
 # Fusion MPT device support
 #
-CONFIG_FUSION=m
-CONFIG_FUSION_MAX_SGE=40
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=m
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+CONFIG_FUSION_MAX_SGE=128
 CONFIG_FUSION_CTL=m
 
 #
@@ -342,151 +556,13 @@ CONFIG_FUSION_CTL=m
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_DEBUG=y
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-# CONFIG_IP_NF_RAW is not set
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP_NF_COMPAT_IPCHAINS=m
-CONFIG_IP_NF_COMPAT_IPFWADM=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-CONFIG_LLC2=m
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
+# Network device support
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -494,12 +570,18 @@ CONFIG_TUN=m
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
-CONFIG_HAPPYMEAL=m
+# CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -514,28 +596,22 @@ CONFIG_TULIP_MMIO=y
 # CONFIG_DE4X5 is not set
 # CONFIG_WINBOND_840 is not set
 # CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
 # CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
-CONFIG_PCNET32=m
+# CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
-CONFIG_ADAPTEC_STARFIRE=m
-# CONFIG_ADAPTEC_STARFIRE_NAPI is not set
-CONFIG_B44=m
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 # CONFIG_DGRS is not set
-CONFIG_EEPRO100=m
-# CONFIG_EEPRO100_PIO is not set
+# CONFIG_EEPRO100 is not set
 CONFIG_E100=m
-# CONFIG_E100_NAPI is not set
 # CONFIG_FEALNX is not set
-CONFIG_NATSEMI=m
+# CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
-CONFIG_8139TOO=m
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_8139TOO is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -554,15 +630,18 @@ CONFIG_E1000=m
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=m
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
-CONFIG_IXGB=y
-CONFIG_IXGB_NAPI=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
 #
@@ -593,6 +672,8 @@ CONFIG_PPPOE=m
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -622,16 +703,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
@@ -649,6 +720,16 @@ CONFIG_INPUT_MOUSE=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=m
+CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=m
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -666,7 +747,6 @@ CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
 # CONFIG_SERIAL_8250_RSA is not set
 
 #
@@ -676,6 +756,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_PDC_CONSOLE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -698,12 +779,16 @@ CONFIG_GEN_RTC_X=y
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_AGP is not set
 # CONFIG_DRM is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=256
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -714,10 +799,20 @@ CONFIG_MAX_RAW_DEVS=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -731,6 +826,11 @@ CONFIG_MAX_RAW_DEVS=256
 # Graphics support
 #
 CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_CIRRUS is not set
@@ -739,6 +839,7 @@ CONFIG_FB=y
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
 CONFIG_FB_STI=y
+# CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
 # CONFIG_FB_RADEON_OLD is not set
@@ -751,18 +852,20 @@ CONFIG_FB_STI=y
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
 # Console display driver support
 #
-CONFIG_STI_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
 CONFIG_DUMMY_CONSOLE_COLUMNS=160
 CONFIG_DUMMY_CONSOLE_ROWS=64
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_STI_CONSOLE=y
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
@@ -775,6 +878,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 CONFIG_LOGO_PARISC_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -784,7 +888,78 @@ CONFIG_SOUND=y
 #
 # Advanced Linux Sound Architecture
 #
-# CONFIG_SND is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
+
+#
+# PCI devices
+#
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+CONFIG_SND_AD1889=y
+# CONFIG_SND_AD1889_OPL3 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
 
 #
 # Open Sound System
@@ -794,6 +969,8 @@ CONFIG_SOUND=y
 #
 # USB support
 #
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 
@@ -804,23 +981,23 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
 
 #
 # USB Host Controller Drivers
 #
 # CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_AUDIO is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
 # CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=m
 
@@ -829,12 +1006,11 @@ CONFIG_USB_PRINTER=m
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_RW_DETECT is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
 CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_HP8200e=y
+CONFIG_USB_STORAGE_USBAT=y
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
@@ -846,21 +1022,25 @@ CONFIG_USB_HID=y
 CONFIG_USB_HIDINPUT=y
 # CONFIG_HID_FF is not set
 CONFIG_USB_HIDDEV=y
-CONFIG_USB_AIPTEK=m
-CONFIG_USB_WACOM=m
-CONFIG_USB_KBTAB=m
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
 # CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
 # CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
 
 #
 # USB Imaging devices
 #
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-CONFIG_USB_HPUSBSCSI=m
 
 #
 # USB Multimedia devices
@@ -879,6 +1059,7 @@ CONFIG_USB_HPUSBSCSI=m
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
@@ -894,7 +1075,6 @@ CONFIG_USB_HPUSBSCSI=m
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
-# CONFIG_USB_TIGL is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 CONFIG_USB_LEGOTOWER=m
@@ -903,10 +1083,12 @@ CONFIG_USB_LEGOTOWER=m
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
 # CONFIG_USB_TEST is not set
 
 #
-# USB ATM/DSL drivers
+# USB DSL modem support
 #
 
 #
@@ -920,27 +1102,41 @@ CONFIG_USB_LEGOTOWER=m
 # CONFIG_MMC is not set
 
 #
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
+CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -966,13 +1162,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -996,16 +1190,19 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
 # CONFIG_NFSD_TCP is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -1014,6 +1211,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1074,13 +1272,19 @@ CONFIG_OPROFILE=m
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_IOREMAP is not set
+# CONFIG_DEBUG_FS is not set
 
 #
 # Security options
@@ -1092,21 +1296,22 @@ CONFIG_MAGIC_SYSRQ=y
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_HMAC is not set
 CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
+# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
 CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
 # CONFIG_CRYPTO_TEA is not set
 # CONFIG_CRYPTO_ARC4 is not set
 # CONFIG_CRYPTO_KHAZAD is not set
@@ -1117,9 +1322,14 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_TEST=m
 
 #
+# Hardware crypto devices
+#
+
+#
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
diff --git a/arch/parisc/defconfig b/arch/parisc/defconfig
index fdae21c503d7..f38a4620d24f 100644
--- a/arch/parisc/defconfig
+++ b/arch/parisc/defconfig
@@ -1,38 +1,56 @@
 #
 # Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc5-pa1
+# Fri Oct 21 23:01:33 2005
 #
 CONFIG_PARISC=y
 CONFIG_MMU=y
 CONFIG_STACK_GROWSUP=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=15
+# CONFIG_AUDIT is not set
 # CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -45,10 +63,21 @@ CONFIG_IOSCHED_DEADLINE=y
 CONFIG_PA7000=y
 # CONFIG_PA7100LC is not set
 # CONFIG_PA7200 is not set
+# CONFIG_PA7300LC is not set
 # CONFIG_PA8X00 is not set
 CONFIG_PA11=y
-# CONFIG_64BIT is not set
 # CONFIG_SMP is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_HPUX is not set
 
@@ -65,14 +94,29 @@ CONFIG_EISA_NAMES=y
 # CONFIG_ISA is not set
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 CONFIG_GSC_DINO=y
 CONFIG_PCI_LBA=y
 CONFIG_IOSAPIC=y
 CONFIG_IOMMU_SBA=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# PA-RISC specific drivers
+#
 CONFIG_SUPERIO=y
 CONFIG_CHASSIS_LCD_LED=y
 CONFIG_PDC_CHASSIS=y
+CONFIG_PDC_STABLE=y
 
 #
 # Executable file formats
@@ -81,15 +125,97 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
 # Device Drivers
 #
 
 #
 # Generic Driver Options
 #
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -99,12 +225,10 @@ CONFIG_BINFMT_ELF=y
 #
 CONFIG_PARPORT=y
 CONFIG_PARPORT_PC=y
-CONFIG_PARPORT_PC_CML1=y
 # CONFIG_PARPORT_SERIAL is not set
 # CONFIG_PARPORT_PC_FIFO is not set
 # CONFIG_PARPORT_PC_SUPERIO is not set
 CONFIG_PARPORT_GSC=y
-# CONFIG_PARPORT_OTHER is not set
 # CONFIG_PARPORT_1284 is not set
 
 #
@@ -114,18 +238,31 @@ CONFIG_PARPORT_GSC=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_PARIDE is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=y
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -135,6 +272,7 @@ CONFIG_BLK_DEV_INITRD=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -147,53 +285,59 @@ CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
 # CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_REPORT_LUNS is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 
 #
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
 # SCSI low-level drivers
 #
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AHA1740 is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_MEGARAID is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CPQFCTS is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_PPA is not set
 # CONFIG_SCSI_IMM is not set
 CONFIG_SCSI_LASI700=y
-CONFIG_53C700_MEM_MAPPED=y
 CONFIG_53C700_LE_ON_BE=y
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+# CONFIG_SCSI_IPR is not set
 CONFIG_SCSI_ZALON=y
 CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
 CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
 CONFIG_SCSI_NCR53C8XX_SYNC=20
 # CONFIG_SCSI_NCR53C8XX_PROFILE is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 CONFIG_SCSI_QLA2XXX=y
@@ -202,7 +346,8 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_SCSI_QLA2300 is not set
 # CONFIG_SCSI_QLA2322 is not set
 # CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_SIM710 is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -217,15 +362,20 @@ CONFIG_BLK_DEV_MD=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
+# CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID5=y
 # CONFIG_MD_RAID6 is not set
 # CONFIG_MD_MULTIPATH is not set
+# CONFIG_MD_FAULTY is not set
 # CONFIG_BLK_DEV_DM is not set
 
 #
 # Fusion MPT device support
 #
 # CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -238,80 +388,23 @@ CONFIG_MD_RAID5=y
 # CONFIG_I2O is not set
 
 #
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
+# Network device support
 #
-# CONFIG_NET_PKTGEN is not set
 CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
 
 #
 # ARCnet devices
 #
 # CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -321,6 +414,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_LASI_82596=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_SMC is not set
 
@@ -336,6 +430,7 @@ CONFIG_TULIP=y
 # CONFIG_DE4X5 is not set
 # CONFIG_WINBOND_840 is not set
 # CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
 # CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
@@ -361,30 +456,37 @@ CONFIG_NET_PCI=y
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
+# CONFIG_NET_POCKET is not set
 
 #
 # Ethernet (1000 Mbit)
 #
-# CONFIG_ACENIC is not set
-CONFIG_DL2K=y
+CONFIG_ACENIC=y
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+# CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
+# CONFIG_VIA_VELOCITY is not set
+CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
 
 #
 # Wireless LAN (non-hamradio)
@@ -399,38 +501,30 @@ CONFIG_NET_RADIO=y
 #
 # Wireless 802.11b ISA/PCI cards support
 #
-CONFIG_AIRO=y
 # CONFIG_HERMES is not set
 # CONFIG_ATMEL is not set
-CONFIG_NET_WIRELESS=y
 
 #
-# Token Ring devices
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
 #
-# CONFIG_TR is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
+CONFIG_NET_WIRELESS=y
 
 #
 # Wan interfaces
 #
 # CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PLIP is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -460,51 +554,67 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_GSCPS2=y
-CONFIG_HP_SDC=y
-CONFIG_HIL_MLC=y
-# CONFIG_SERIO_PCIPS2 is not set
-
-#
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_HIL_OLD=y
 CONFIG_KEYBOARD_HIL=y
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_MOUSE_HIL is not set
 CONFIG_INPUT_JOYSTICK=y
+# CONFIG_JOYSTICK_ANALOG is not set
+# CONFIG_JOYSTICK_A3D is not set
+# CONFIG_JOYSTICK_ADI is not set
+# CONFIG_JOYSTICK_COBRA is not set
+# CONFIG_JOYSTICK_GF2K is not set
+# CONFIG_JOYSTICK_GRIP is not set
+# CONFIG_JOYSTICK_GRIP_MP is not set
+# CONFIG_JOYSTICK_GUILLEMOT is not set
+# CONFIG_JOYSTICK_INTERACT is not set
+# CONFIG_JOYSTICK_SIDEWINDER is not set
+# CONFIG_JOYSTICK_TMDC is not set
 # CONFIG_JOYSTICK_IFORCE is not set
 # CONFIG_JOYSTICK_WARRIOR is not set
 # CONFIG_JOYSTICK_MAGELLAN is not set
 # CONFIG_JOYSTICK_SPACEORB is not set
 # CONFIG_JOYSTICK_SPACEBALL is not set
 # CONFIG_JOYSTICK_STINGER is not set
-# CONFIG_JOYSTICK_TWIDDLER is not set
+# CONFIG_JOYSTICK_TWIDJOY is not set
 # CONFIG_JOYSTICK_DB9 is not set
 # CONFIG_JOYSTICK_GAMECON is not set
 # CONFIG_JOYSTICK_TURBOGRAFX is not set
-# CONFIG_INPUT_JOYDUMP is not set
+# CONFIG_JOYSTICK_JOYDUMP is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_PCSPKR is not set
 # CONFIG_INPUT_UINPUT is not set
 CONFIG_HP_SDC_RTC=y
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PARKBD is not set
+CONFIG_SERIO_GSCPS2=y
+CONFIG_HP_SDC=y
+CONFIG_HIL_MLC=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -522,16 +632,16 @@ CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
 # CONFIG_SERIAL_8250_RSA is not set
 
 #
 # Non-8250 serial port support
 #
-# CONFIG_SERIAL_MUX is not set
-# CONFIG_PDC_CONSOLE is not set
+CONFIG_SERIAL_MUX=y
+CONFIG_SERIAL_MUX_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -541,12 +651,6 @@ CONFIG_PRINTER=y
 # CONFIG_TIPAR is not set
 
 #
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
 # IPMI
 #
 # CONFIG_IPMI_HANDLER is not set
@@ -555,7 +659,6 @@ CONFIG_PRINTER=y
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
@@ -565,21 +668,40 @@ CONFIG_GEN_RTC=y
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
 
 #
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -593,34 +715,45 @@ CONFIG_GEN_RTC=y
 # Graphics support
 #
 CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_CIRRUS is not set
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
 CONFIG_FB_STI=y
+# CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
 # CONFIG_FB_RADEON_OLD is not set
 # CONFIG_FB_RADEON is not set
 # CONFIG_FB_ATY128 is not set
 # CONFIG_FB_ATY is not set
+# CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
 # Console display driver support
 #
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_STI_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
 CONFIG_DUMMY_CONSOLE_COLUMNS=160
 CONFIG_DUMMY_CONSOLE_ROWS=64
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_PCI_CONSOLE=y
+CONFIG_STI_CONSOLE=y
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
@@ -629,6 +762,7 @@ CONFIG_FONT_8x16=y
 # Logo configuration
 #
 # CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -638,17 +772,94 @@ CONFIG_SOUND=y
 #
 # Advanced Linux Sound Architecture
 #
-# CONFIG_SND is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
+
+#
+# PCI devices
+#
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+CONFIG_SND_AD1889=y
+# CONFIG_SND_AD1889_OPL3 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+
+#
+# GSC devices
+#
+CONFIG_SND_HARMONY=y
 
 #
 # Open Sound System
 #
 # CONFIG_SOUND_PRIME is not set
-# CONFIG_SOUND_HARMONY is not set
 
 #
 # USB support
 #
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 
@@ -658,26 +869,36 @@ CONFIG_USB_DEBUG=y
 # CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
 
 #
 # USB Host Controller Drivers
 #
 CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
 
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_AUDIO is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
 # CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
 # CONFIG_USB_STORAGE is not set
 
 #
-# USB Human Interface Devices (HID)
+# USB Input Devices
 #
 # CONFIG_USB_HID is not set
 
@@ -688,16 +909,23 @@ CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_MOUSE is not set
 # CONFIG_USB_AIPTEK is not set
 # CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
 
 #
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_HPUSBSCSI is not set
 
 #
 # USB Multimedia devices
@@ -709,13 +937,15 @@ CONFIG_USB_OHCI_HCD=y
 #
 
 #
-# USB Network adaptors
+# USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_ZD1201 is not set
+CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -732,12 +962,21 @@ CONFIG_USB_OHCI_HCD=y
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
-# CONFIG_USB_TIGL is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+
+#
+# USB DSL modem support
+#
 
 #
 # USB Gadget Support
@@ -745,22 +984,41 @@ CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_GADGET is not set
 
 #
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -773,7 +1031,8 @@ CONFIG_JOLIET=y
 #
 # DOS/FAT/NT Filesystems
 #
-# CONFIG_FAT_FS is not set
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
 # CONFIG_NTFS_FS is not set
 
 #
@@ -781,11 +1040,11 @@ CONFIG_JOLIET=y
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -809,23 +1068,28 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -861,6 +1125,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_ISO8859_8 is not set
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
 # CONFIG_NLS_ISO8859_1 is not set
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
@@ -885,17 +1150,24 @@ CONFIG_OPROFILE=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SLAB is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_RWLOCK is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_IOREMAP is not set
+# CONFIG_DEBUG_FS is not set
 
 #
 # Security options
 #
+# CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 
 #
@@ -909,6 +1181,8 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
 # CONFIG_CRYPTO_DES is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
@@ -916,11 +1190,23 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_AES is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
 # CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_TEST is not set
 
 #
+# Hardware crypto devices
+#
+
+#
 # Library routines
 #
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
diff --git a/arch/parisc/kernel/asm-offsets.c b/arch/parisc/kernel/asm-offsets.c
index 1ad44f92d6e4..e23c4e1e3a25 100644
--- a/arch/parisc/kernel/asm-offsets.c
+++ b/arch/parisc/kernel/asm-offsets.c
@@ -30,7 +30,6 @@
 #include <linux/types.h>
 #include <linux/sched.h>
 #include <linux/thread_info.h>
-#include <linux/version.h>
 #include <linux/ptrace.h>
 #include <linux/hardirq.h>
 
diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index f46a07a79218..a065349aee37 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -27,6 +27,7 @@
 #include <asm/page.h>
 #include <asm/pgalloc.h>
 #include <asm/processor.h>
+#include <asm/sections.h>
 
 int split_tlb;
 int dcache_stride;
@@ -207,6 +208,9 @@ parisc_cache_init(void)
 
 	/* "New and Improved" version from Jim Hull 
 	 *	(1 << (cc_block-1)) * (cc_line << (4 + cnf.cc_shift))
+	 * The following CAFL_STRIDE is an optimized version, see
+	 * http://lists.parisc-linux.org/pipermail/parisc-linux/2004-June/023625.html
+	 * http://lists.parisc-linux.org/pipermail/parisc-linux/2004-June/023671.html
 	 */
 #define CAFL_STRIDE(cnf) (cnf.cc_line << (3 + cnf.cc_block + cnf.cc_shift))
 	dcache_stride = CAFL_STRIDE(cache_info.dc_conf);
@@ -266,7 +270,6 @@ void flush_dcache_page(struct page *page)
 	unsigned long offset;
 	unsigned long addr;
 	pgoff_t pgoff;
-	pte_t *pte;
 	unsigned long pfn = page_to_pfn(page);
 
 
@@ -297,21 +300,16 @@ void flush_dcache_page(struct page *page)
 		 * taking a page fault if the pte doesn't exist.
 		 * This is just for speed.  If the page translation
 		 * isn't there, there's no point exciting the
-		 * nadtlb handler into a nullification frenzy */
-
-
-  		if(!(pte = translation_exists(mpnt, addr)))
-			continue;
-
-		/* make sure we really have this page: the private
+		 * nadtlb handler into a nullification frenzy.
+		 *
+		 * Make sure we really have this page: the private
 		 * mappings may cover this area but have COW'd this
-		 * particular page */
-		if(pte_pfn(*pte) != pfn)
-  			continue;
-
-		__flush_cache_page(mpnt, addr);
-
-		break;
+		 * particular page.
+		 */
+  		if (translation_exists(mpnt, addr, pfn)) {
+			__flush_cache_page(mpnt, addr);
+			break;
+		}
 	}
 	flush_dcache_mmap_unlock(mapping);
 }
@@ -339,17 +337,15 @@ int parisc_cache_flush_threshold = FLUSH_THRESHOLD;
 void parisc_setup_cache_timing(void)
 {
 	unsigned long rangetime, alltime;
-	extern char _text;	/* start of kernel code, defined by linker */
-	extern char _end;	/* end of BSS, defined by linker */
 	unsigned long size;
 
 	alltime = mfctl(16);
 	flush_data_cache();
 	alltime = mfctl(16) - alltime;
 
-	size = (unsigned long)(&_end - _text);
+	size = (unsigned long)(_end - _text);
 	rangetime = mfctl(16);
-	flush_kernel_dcache_range((unsigned long)&_text, size);
+	flush_kernel_dcache_range((unsigned long)_text, size);
 	rangetime = mfctl(16) - rangetime;
 
 	printk(KERN_DEBUG "Whole cache flush %lu cycles, flushing %lu bytes %lu cycles\n",
diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c
index d34bbe7ae0e3..d016d672ec2b 100644
--- a/arch/parisc/kernel/drivers.c
+++ b/arch/parisc/kernel/drivers.c
@@ -46,36 +46,51 @@ static struct device root = {
 	.bus_id = "parisc",
 };
 
-#define for_each_padev(padev) \
-	for (padev = next_dev(&root); padev != NULL; \
-			padev = next_dev(&padev->dev))
+static inline int check_dev(struct device *dev)
+{
+	if (dev->bus == &parisc_bus_type) {
+		struct parisc_device *pdev;
+		pdev = to_parisc_device(dev);
+		return pdev->id.hw_type != HPHW_FAULTY;
+	}
+	return 1;
+}
+
+static struct device *
+parse_tree_node(struct device *parent, int index, struct hardware_path *modpath);
 
-#define check_dev(padev) \
-	(padev->id.hw_type != HPHW_FAULTY) ? padev : next_dev(&padev->dev)
+struct recurse_struct {
+	void * obj;
+	int (*fn)(struct device *, void *);
+};
+
+static int descend_children(struct device * dev, void * data)
+{
+	struct recurse_struct * recurse_data = (struct recurse_struct *)data;
+
+	if (recurse_data->fn(dev, recurse_data->obj))
+		return 1;
+	else
+		return device_for_each_child(dev, recurse_data, descend_children);
+}
 
 /**
- * next_dev - enumerates registered devices
- * @dev: the previous device returned from next_dev
+ *	for_each_padev - Iterate over all devices in the tree
+ *	@fn:	Function to call for each device.
+ *	@data:	Data to pass to the called function.
  *
- * next_dev does a depth-first search of the tree, returning parents
- * before children.  Returns NULL when there are no more devices.
+ *	This performs a depth-first traversal of the tree, calling the
+ *	function passed for each node.  It calls the function for parents
+ *	before children.
  */
-static struct parisc_device *next_dev(struct device *dev)
-{
-	if (!list_empty(&dev->children)) {
-		dev = list_to_dev(dev->children.next);
-		return check_dev(to_parisc_device(dev));
-	}
 
-	while (dev != &root) {
-		if (dev->node.next != &dev->parent->children) {
-			dev = list_to_dev(dev->node.next);
-			return to_parisc_device(dev);
-		}
-		dev = dev->parent;
-	}
-
-	return NULL;
+static int for_each_padev(int (*fn)(struct device *, void *), void * data)
+{
+	struct recurse_struct recurse_data = {
+		.obj	= data,
+		.fn	= fn,
+	};
+	return device_for_each_child(&root, &recurse_data, descend_children);
 }
 
 /**
@@ -105,12 +120,6 @@ static int match_device(struct parisc_driver *driver, struct parisc_device *dev)
 	return 0;
 }
 
-static void claim_device(struct parisc_driver *driver, struct parisc_device *dev)
-{
-	dev->driver = driver;
-	request_mem_region(dev->hpa, 0x1000, driver->name);
-}
-
 static int parisc_driver_probe(struct device *dev)
 {
 	int rc;
@@ -119,8 +128,8 @@ static int parisc_driver_probe(struct device *dev)
 
 	rc = pa_drv->probe(pa_dev);
 
-	if(!rc)
-		claim_device(pa_drv, pa_dev);
+	if (!rc)
+		pa_dev->driver = pa_drv;
 
 	return rc;
 }
@@ -131,7 +140,6 @@ static int parisc_driver_remove(struct device *dev)
 	struct parisc_driver *pa_drv = to_parisc_driver(dev->driver);
 	if (pa_drv->remove)
 		pa_drv->remove(pa_dev);
-	release_mem_region(pa_dev->hpa, 0x1000);
 
 	return 0;
 }
@@ -173,6 +181,24 @@ int register_parisc_driver(struct parisc_driver *driver)
 }
 EXPORT_SYMBOL(register_parisc_driver);
 
+
+struct match_count {
+	struct parisc_driver * driver;
+	int count;
+};
+
+static int match_and_count(struct device * dev, void * data)
+{
+	struct match_count * m = data;
+	struct parisc_device * pdev = to_parisc_device(dev);
+
+	if (check_dev(dev)) {
+		if (match_device(m->driver, pdev))
+			m->count++;
+	}
+	return 0;
+}
+
 /**
  * count_parisc_driver - count # of devices this driver would match
  * @driver: the PA-RISC driver to try
@@ -182,15 +208,14 @@ EXPORT_SYMBOL(register_parisc_driver);
  */
 int count_parisc_driver(struct parisc_driver *driver)
 {
-	struct parisc_device *device;
-	int cnt = 0;
+	struct match_count m = {
+		.driver	= driver,
+		.count	= 0,
+	};
 
-	for_each_padev(device) {
-		if (match_device(driver, device))
-			cnt++;
-	}
+	for_each_padev(match_and_count, &m);
 
-	return cnt;
+	return m.count;
 }
 
 
@@ -206,14 +231,34 @@ int unregister_parisc_driver(struct parisc_driver *driver)
 }
 EXPORT_SYMBOL(unregister_parisc_driver);
 
-static struct parisc_device *find_device_by_addr(unsigned long hpa)
+struct find_data {
+	unsigned long hpa;
+	struct parisc_device * dev;
+};
+
+static int find_device(struct device * dev, void * data)
 {
-	struct parisc_device *dev;
-	for_each_padev(dev) {
-		if (dev->hpa == hpa)
-			return dev;
+	struct parisc_device * pdev = to_parisc_device(dev);
+	struct find_data * d = (struct find_data*)data;
+
+	if (check_dev(dev)) {
+		if (pdev->hpa.start == d->hpa) {
+			d->dev = pdev;
+			return 1;
+		}
 	}
-	return NULL;
+	return 0;
+}
+
+static struct parisc_device *find_device_by_addr(unsigned long hpa)
+{
+	struct find_data d = {
+		.hpa	= hpa,
+	};
+	int ret;
+
+	ret = for_each_padev(find_device, &d);
+	return ret ? d.dev : NULL;
 }
 
 /**
@@ -387,6 +432,23 @@ struct parisc_device * create_tree_node(char id, struct device *parent)
 	return dev;
 }
 
+struct match_id_data {
+	char id;
+	struct parisc_device * dev;
+};
+
+static int match_by_id(struct device * dev, void * data)
+{
+	struct parisc_device * pdev = to_parisc_device(dev);
+	struct match_id_data * d = data;
+
+	if (pdev->hw_path == d->id) {
+		d->dev = pdev;
+		return 1;
+	}
+	return 0;
+}
+
 /**
  * alloc_tree_node - returns a device entry in the iotree
  * @parent: the parent node in the tree
@@ -397,15 +459,13 @@ struct parisc_device * create_tree_node(char id, struct device *parent)
  */
 static struct parisc_device * alloc_tree_node(struct device *parent, char id)
 {
-	struct device *dev;
-
-	list_for_each_entry(dev, &parent->children, node) {
-		struct parisc_device *padev = to_parisc_device(dev);
-		if (padev->hw_path == id)
-			return padev;
-	}
-
-	return create_tree_node(id, parent);
+	struct match_id_data d = {
+		.id = id,
+	};
+	if (device_for_each_child(parent, &d, match_by_id))
+		return d.dev;
+	else
+		return create_tree_node(id, parent);
 }
 
 static struct parisc_device *create_parisc_device(struct hardware_path *modpath)
@@ -439,10 +499,12 @@ alloc_pa_dev(unsigned long hpa, struct hardware_path *mod_path)
 
 	dev = create_parisc_device(mod_path);
 	if (dev->id.hw_type != HPHW_FAULTY) {
-		char p[64];
-		print_pa_hwpath(dev, p);
-		printk("Two devices have hardware path %s.  Please file a bug with HP.\n"
-			"In the meantime, you could try rearranging your cards.\n", p);
+		printk(KERN_ERR "Two devices have hardware path [%s].  "
+				"IODC data for second device: "
+				"%02x%02x%02x%02x%02x%02x\n"
+				"Rearranging GSC cards sometimes helps\n",
+			parisc_pathname(dev), iodc_data[0], iodc_data[1],
+			iodc_data[3], iodc_data[4], iodc_data[5], iodc_data[6]);
 		return NULL;
 	}
 
@@ -451,12 +513,27 @@ alloc_pa_dev(unsigned long hpa, struct hardware_path *mod_path)
 	dev->id.hversion_rev = iodc_data[1] & 0x0f;
 	dev->id.sversion = ((iodc_data[4] & 0x0f) << 16) |
 			(iodc_data[5] << 8) | iodc_data[6];
-	dev->hpa = hpa;
+	dev->hpa.name = parisc_pathname(dev);
+	dev->hpa.start = hpa;
+	if (hpa == 0xf4000000 || hpa == 0xf6000000 ||
+	    hpa == 0xf8000000 || hpa == 0xfa000000) {
+		dev->hpa.end = hpa + 0x01ffffff;
+	} else {
+		dev->hpa.end = hpa + 0xfff;
+	}
+	dev->hpa.flags = IORESOURCE_MEM;
 	name = parisc_hardware_description(&dev->id);
 	if (name) {
 		strlcpy(dev->name, name, sizeof(dev->name));
 	}
 
+	/* Silently fail things like mouse ports which are subsumed within
+	 * the keyboard controller
+	 */
+	if ((hpa & 0xfff) == 0 && insert_resource(&iomem_resource, &dev->hpa))
+		printk("Unable to claim HPA %lx for device %s\n",
+				hpa, name);
+
 	return dev;
 }
 
@@ -555,6 +632,33 @@ static int match_parisc_device(struct device *dev, int index,
 	return (curr->hw_path == id);
 }
 
+struct parse_tree_data {
+	int index;
+	struct hardware_path * modpath;
+	struct device * dev;
+};
+
+static int check_parent(struct device * dev, void * data)
+{
+	struct parse_tree_data * d = data;
+
+	if (check_dev(dev)) {
+		if (dev->bus == &parisc_bus_type) {
+			if (match_parisc_device(dev, d->index, d->modpath))
+				d->dev = dev;
+		} else if (is_pci_dev(dev)) {
+			if (match_pci_device(dev, d->index, d->modpath))
+				d->dev = dev;
+		} else if (dev->bus == NULL) {
+			/* we are on a bus bridge */
+			struct device *new = parse_tree_node(dev, d->index, d->modpath);
+			if (new)
+				d->dev = new;
+		}
+	}
+	return d->dev != NULL;
+}
+
 /**
  * parse_tree_node - returns a device entry in the iotree
  * @parent: the parent node in the tree
@@ -568,24 +672,18 @@ static int match_parisc_device(struct device *dev, int index,
 static struct device *
 parse_tree_node(struct device *parent, int index, struct hardware_path *modpath)
 {
-	struct device *device;
-	 
-	list_for_each_entry(device, &parent->children, node) {
-		if (device->bus == &parisc_bus_type) {
-			if (match_parisc_device(device, index, modpath))
-				return device;
-		} else if (is_pci_dev(device)) {
-			if (match_pci_device(device, index, modpath))
-				return device;
-		} else if (device->bus == NULL) {
-			/* we are on a bus bridge */
-			struct device *new = parse_tree_node(device, index, modpath);
-			if (new)
-				return new;
-		}
-	}
+	struct parse_tree_data d = {
+		.index          = index,
+		.modpath        = modpath,
+	};
 
-	return NULL;
+	struct recurse_struct recurse_data = {
+		.obj	= &d,
+		.fn	= check_parent,
+	};
+
+	device_for_each_child(parent, &recurse_data, descend_children);
+	return d.dev;
 }
 
 /**
@@ -636,7 +734,7 @@ EXPORT_SYMBOL(device_to_hwpath);
         ((dev->id.hw_type == HPHW_IOA) || (dev->id.hw_type == HPHW_BCPORT))
 
 #define IS_LOWER_PORT(dev) \
-        ((gsc_readl(dev->hpa + offsetof(struct bc_module, io_status)) \
+        ((gsc_readl(dev->hpa.start + offsetof(struct bc_module, io_status)) \
                 & BC_PORT_MASK) == BC_LOWER_PORT)
 
 #define MAX_NATIVE_DEVICES 64
@@ -645,8 +743,8 @@ EXPORT_SYMBOL(device_to_hwpath);
 #define FLEX_MASK 	F_EXTEND(0xfffc0000)
 #define IO_IO_LOW	offsetof(struct bc_module, io_io_low)
 #define IO_IO_HIGH	offsetof(struct bc_module, io_io_high)
-#define READ_IO_IO_LOW(dev)  (unsigned long)(signed int)gsc_readl(dev->hpa + IO_IO_LOW)
-#define READ_IO_IO_HIGH(dev) (unsigned long)(signed int)gsc_readl(dev->hpa + IO_IO_HIGH)
+#define READ_IO_IO_LOW(dev)  (unsigned long)(signed int)gsc_readl(dev->hpa.start + IO_IO_LOW)
+#define READ_IO_IO_HIGH(dev) (unsigned long)(signed int)gsc_readl(dev->hpa.start + IO_IO_HIGH)
 
 static void walk_native_bus(unsigned long io_io_low, unsigned long io_io_high,
                             struct device *parent);
@@ -655,10 +753,10 @@ void walk_lower_bus(struct parisc_device *dev)
 {
 	unsigned long io_io_low, io_io_high;
 
-	if(!BUS_CONVERTER(dev) || IS_LOWER_PORT(dev))
+	if (!BUS_CONVERTER(dev) || IS_LOWER_PORT(dev))
 		return;
 
-	if(dev->id.hw_type == HPHW_IOA) {
+	if (dev->id.hw_type == HPHW_IOA) {
 		io_io_low = (unsigned long)(signed int)(READ_IO_IO_LOW(dev) << 16);
 		io_io_high = io_io_low + MAX_NATIVE_DEVICES * NATIVE_DEVICE_OFFSET;
 	} else {
@@ -731,7 +829,7 @@ static void print_parisc_device(struct parisc_device *dev)
 
 	print_pa_hwpath(dev, hw_path);
 	printk(KERN_INFO "%d. %s at 0x%lx [%s] { %d, 0x%x, 0x%.3x, 0x%.5x }",
-		++count, dev->name, dev->hpa, hw_path, dev->id.hw_type,
+		++count, dev->name, dev->hpa.start, hw_path, dev->id.hw_type,
 		dev->id.hversion_rev, dev->id.hversion, dev->id.sversion);
 
 	if (dev->num_addrs) {
@@ -753,13 +851,20 @@ void init_parisc_bus(void)
 	get_device(&root);
 }
 
+
+static int print_one_device(struct device * dev, void * data)
+{
+	struct parisc_device * pdev = to_parisc_device(dev);
+
+	if (check_dev(dev))
+		print_parisc_device(pdev);
+	return 0;
+}
+
 /**
  * print_parisc_devices - Print out a list of devices found in this system
  */
 void print_parisc_devices(void)
 {
-	struct parisc_device *dev;
-	for_each_padev(dev) {
-		print_parisc_device(dev);
-	}
+	for_each_padev(print_one_device, NULL);
 }
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index be0f07f2fa58..9af4b22a6d77 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -30,14 +30,14 @@
  *  - save registers to kernel stack and handle in assembly or C */
 
 
+#include <asm/psw.h>
 #include <asm/assembly.h>	/* for LDREG/STREG defines */
 #include <asm/pgtable.h>
-#include <asm/psw.h>
 #include <asm/signal.h>
 #include <asm/unistd.h>
 #include <asm/thread_info.h>
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 #define CMPIB           cmpib,*
 #define CMPB            cmpb,*
 #define COND(x)		*x
@@ -67,19 +67,22 @@
 
 	/* Switch to virtual mapping, trashing only %r1 */
 	.macro  virt_map
-	rsm     PSW_SM_Q,%r0
-	tovirt_r1 %r29
-	mfsp	%sr7, %r1
-	or,=    %r0,%r1,%r0 /* Only save sr7 in sr3 if sr7 != 0 */
-	mtsp	%r1, %sr3
+	/* pcxt_ssm_bug */
+	rsm	PSW_SM_I, %r0	/* barrier for "Relied upon Translation */
 	mtsp	%r0, %sr4
 	mtsp	%r0, %sr5
+	mfsp	%sr7, %r1
+	or,=    %r0,%r1,%r0	/* Only save sr7 in sr3 if sr7 != 0 */
+	mtsp	%r1, %sr3
+	tovirt_r1 %r29
+	load32	KERNEL_PSW, %r1
+
+	rsm     PSW_SM_QUIET,%r0	/* second "heavy weight" ctl op */
 	mtsp	%r0, %sr6
 	mtsp	%r0, %sr7
-	load32	KERNEL_PSW, %r1
-	mtctl	%r1, %cr22
 	mtctl	%r0, %cr17	/* Clear IIASQ tail */
 	mtctl	%r0, %cr17	/* Clear IIASQ head */
+	mtctl	%r1, %ipsw
 	load32	4f, %r1
 	mtctl	%r1, %cr18	/* Set IIAOQ tail */
 	ldo	4(%r1), %r1
@@ -214,7 +217,7 @@
 	va  = r8	/* virtual address for which the trap occured */
 	spc = r24	/* space for which the trap occured */
 
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 
 	/*
 	 * itlb miss interruption handler (parisc 1.1 - 32 bit)
@@ -236,7 +239,7 @@
 
 	.macro	itlb_20 code
 	mfctl	%pcsq, spc
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	b       itlb_miss_20w
 #else
 	b	itlb_miss_20
@@ -246,7 +249,7 @@
 	.align		32
 	.endm
 	
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 	/*
 	 * naitlb miss interruption handler (parisc 1.1 - 32 bit)
 	 *
@@ -283,7 +286,7 @@
 	.macro	naitlb_20 code
 
 	mfctl	%isr,spc
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	b       itlb_miss_20w
 #else
 	b	itlb_miss_20
@@ -296,7 +299,7 @@
 	.align		32
 	.endm
 	
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 	/*
 	 * dtlb miss interruption handler (parisc 1.1 - 32 bit)
 	 */
@@ -318,7 +321,7 @@
 	.macro	dtlb_20 code
 
 	mfctl	%isr, spc
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	b       dtlb_miss_20w
 #else
 	b	dtlb_miss_20
@@ -328,7 +331,7 @@
 	.align		32
 	.endm
 	
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 	/* nadtlb miss interruption handler (parisc 1.1 - 32 bit) */
 
 	.macro	nadtlb_11 code
@@ -346,7 +349,7 @@
 	.macro	nadtlb_20 code
 
 	mfctl	%isr,spc
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	b       nadtlb_miss_20w
 #else
 	b       nadtlb_miss_20
@@ -356,7 +359,7 @@
 	.align		32
 	.endm
 	
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 	/*
 	 * dirty bit trap interruption handler (parisc 1.1 - 32 bit)
 	 */
@@ -378,7 +381,7 @@
 	.macro	dbit_20 code
 
 	mfctl	%isr,spc
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	b       dbit_trap_20w
 #else
 	b	dbit_trap_20
@@ -391,7 +394,7 @@
 	/* The following are simple 32 vs 64 bit instruction
 	 * abstractions for the macros */
 	.macro		EXTR	reg1,start,length,reg2
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	extrd,u		\reg1,32+\start,\length,\reg2
 #else
 	extrw,u		\reg1,\start,\length,\reg2
@@ -399,7 +402,7 @@
 	.endm
 
 	.macro		DEP	reg1,start,length,reg2
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	depd		\reg1,32+\start,\length,\reg2
 #else
 	depw		\reg1,\start,\length,\reg2
@@ -407,7 +410,7 @@
 	.endm
 
 	.macro		DEPI	val,start,length,reg
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	depdi		\val,32+\start,\length,\reg
 #else
 	depwi		\val,\start,\length,\reg
@@ -418,7 +421,7 @@
 	 * fault.  We have to extract this and place it in the va,
 	 * zeroing the corresponding bits in the space register */
 	.macro		space_adjust	spc,va,tmp
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	extrd,u		\spc,63,SPACEID_SHIFT,\tmp
 	depd		%r0,63,SPACEID_SHIFT,\spc
 	depd		\tmp,31,SPACEID_SHIFT,\va
@@ -476,7 +479,7 @@
 	bb,>=,n		\pmd,_PxD_PRESENT_BIT,\fault
 	DEP		%r0,31,PxD_FLAG_SHIFT,\pmd /* clear flags */
 	copy		\pmd,%r9
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	shld		%r9,PxD_VALUE_SHIFT,\pmd
 #else
 	shlw		%r9,PxD_VALUE_SHIFT,\pmd
@@ -607,7 +610,7 @@
 	.macro		do_alias	spc,tmp,tmp1,va,pte,prot,fault
 	cmpib,COND(<>),n 0,\spc,\fault
 	ldil		L%(TMPALIAS_MAP_START),\tmp
-#if defined(__LP64__) && (TMPALIAS_MAP_START >= 0x80000000)
+#if defined(CONFIG_64BIT) && (TMPALIAS_MAP_START >= 0x80000000)
 	/* on LP64, ldi will sign extend into the upper 32 bits,
 	 * which is behaviour we don't want */
 	depdi		0,31,32,\tmp
@@ -621,7 +624,7 @@
 	 * OK, it is in the temp alias region, check whether "from" or "to".
 	 * Check "subtle" note in pacache.S re: r23/r26.
 	 */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	extrd,u,*=	\va,41,1,%r0
 #else
 	extrw,u,=	\va,9,1,%r0
@@ -688,7 +691,7 @@ fault_vector_20:
 	def		30
 	def		31
 
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 
 	.export fault_vector_11
 	
@@ -761,7 +764,7 @@ __kernel_thread:
 
 	copy	%r30, %r1
 	ldo	PT_SZ_ALGN(%r30),%r30
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* Yo, function pointers in wide mode are little structs... -PB */
 	ldd	24(%r26), %r2
 	STREG	%r2, PT_GR27(%r1)	/* Store childs %dp */
@@ -777,7 +780,7 @@ __kernel_thread:
 	or	%r26, %r24, %r26      /* will have kernel mappings.	 */
 	ldi	1, %r25			/* stack_start, signals kernel thread */
 	stw	%r0, -52(%r30)	     	/* user_tid */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29		/* Reference param save area */
 #endif
 	BL	do_fork, %r2
@@ -806,7 +809,7 @@ ret_from_kernel_thread:
 
 	LDREG	TI_TASK-THREAD_SZ_ALGN(%r30), %r1
 	LDREG	TASK_PT_GR25(%r1), %r26
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	LDREG	TASK_PT_GR27(%r1), %r27
 	LDREG	TASK_PT_GR22(%r1), %r22
 #endif
@@ -814,11 +817,16 @@ ret_from_kernel_thread:
 	ble	0(%sr7, %r1)
 	copy	%r31, %r2
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29		/* Reference param save area */
 	loadgp				/* Thread could have been in a module */
 #endif
+#ifndef CONFIG_64BIT
 	b	sys_exit
+#else
+	load32	sys_exit, %r1
+	bv	%r0(%r1)
+#endif
 	ldi	0, %r26
 
 	.import	sys_execve, code
@@ -830,7 +838,7 @@ __execve:
 	STREG	%r26, PT_GR26(%r16)
 	STREG	%r25, PT_GR25(%r16)
 	STREG	%r24, PT_GR24(%r16)
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29		/* Reference param save area */
 #endif
 	BL	sys_execve, %r2
@@ -855,6 +863,7 @@ __execve:
 _switch_to:
 	STREG	 %r2, -RP_OFFSET(%r30)
 
+	callee_save_float
 	callee_save
 
 	load32	_switch_to_ret, %r2
@@ -871,6 +880,7 @@ _switch_to:
 _switch_to_ret:
 	mtctl	%r0, %cr0		/* Needed for single stepping */
 	callee_rest
+	callee_rest_float
 
 	LDREG	-RP_OFFSET(%r30), %r2
 	bv	%r0(%r2)
@@ -888,9 +898,6 @@ _switch_to_ret:
 	 * this way, then we will need to copy %sr3 in to PT_SR[3..7], and
 	 * adjust IASQ[0..1].
 	 *
-	 * Note that the following code uses a "relied upon translation".
-	 * See the parisc ACD for details. The ssm is necessary due to a
-	 * PCXT bug.
 	 */
 
 	.align 4096
@@ -911,7 +918,7 @@ syscall_exit_rfi:
 	STREG	%r19,PT_IAOQ1(%r16)
 	LDREG   PT_PSW(%r16),%r19
 	load32	USER_PSW_MASK,%r1
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	load32	USER_PSW_HI_MASK,%r20
 	depd    %r20,31,32,%r1
 #endif
@@ -955,7 +962,7 @@ intr_return:
 	/* shift left ____cacheline_aligned (aka L1_CACHE_BYTES) amount
 	** irq_stat[] is defined using ____cacheline_aligned.
 	*/
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	shld	%r1, 6, %r20
 #else
 	shlw	%r1, 5, %r20
@@ -963,9 +970,6 @@ intr_return:
 	add     %r19,%r20,%r19	/* now have &irq_stat[smp_processor_id()] */
 #endif /* CONFIG_SMP */
 
-	LDREG   IRQSTAT_SIRQ_PEND(%r19),%r20    /* hardirq.h: unsigned long */
-	cmpib,<>,n 0,%r20,intr_do_softirq /* forward */
-
 intr_check_resched:
 
 	/* check for reschedule */
@@ -985,24 +989,19 @@ intr_restore:
 	rest_fp         %r1
 	rest_general    %r29
 
-	/* Create a "relied upon translation" PA 2.0 Arch. F-5 */
-	ssm		0,%r0
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
+	/* inverse of virt_map */
+	pcxt_ssm_bug
+	rsm             PSW_SM_QUIET,%r0	/* prepare for rfi */
 	tophys_r1       %r29
-	rsm             (PSW_SM_Q|PSW_SM_P|PSW_SM_D|PSW_SM_I),%r0
 
 	/* Restore space id's and special cr's from PT_REGS
-	 * structure pointed to by r29 */
+	 * structure pointed to by r29
+	 */
 	rest_specials	%r29
 
-	/* Important: Note that rest_stack restores r29
-	 * last (we are using it)! It also restores r1 and r30. */
+	/* IMPORTANT: rest_stack restores r29 last (we are using it)!
+	 * It also restores r1 and r30.
+	 */
 	rest_stack
 
 	rfi
@@ -1015,17 +1014,6 @@ intr_restore:
 	nop
 	nop
 
-	.import do_softirq,code
-intr_do_softirq:
-	bl      do_softirq,%r2
-#ifdef __LP64__
-	ldo	-16(%r30),%r29		/* Reference param save area */
-#else
-	nop
-#endif
-	b       intr_check_resched
-	nop
-
 	.import schedule,code
 intr_do_resched:
 	/* Only do reschedule if we are returning to user space */
@@ -1036,12 +1024,17 @@ intr_do_resched:
 	CMPIB= 0,%r20,intr_restore /* backward */
 	nop
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29		/* Reference param save area */
 #endif
 
 	ldil	L%intr_check_sig, %r2
+#ifndef CONFIG_64BIT
 	b	schedule
+#else
+	load32	schedule, %r20
+	bv	%r0(%r20)
+#endif
 	ldo	R%intr_check_sig(%r2), %r2
 
 
@@ -1064,7 +1057,7 @@ intr_do_signal:
 
 	copy	%r0, %r24			/* unsigned long in_syscall */
 	copy	%r16, %r25			/* struct pt_regs *regs */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29			/* Reference param save area */
 #endif
 
@@ -1088,7 +1081,7 @@ intr_extint:
 	mfctl	%cr31,%r1
 	copy	%r30,%r17
 	/* FIXME! depi below has hardcoded idea of interrupt stack size (32k)*/
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	depdi	0,63,15,%r17
 #else
 	depi	0,31,15,%r17
@@ -1115,7 +1108,7 @@ intr_extint:
 
 	ldil	L%intr_return, %r2
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29	/* Reference param save area */
 #endif
 
@@ -1153,15 +1146,17 @@ intr_save:
 
 	CMPIB=,n        6,%r26,skip_save_ior
 
-	/* save_specials left ipsw value in r8 for us to test */
 
 	mfctl           %cr20, %r16 /* isr */
+	nop		/* serialize mfctl on PA 2.0 to avoid 4 cycle penalty */
 	mfctl           %cr21, %r17 /* ior */
 
-#ifdef __LP64__
+
+#ifdef CONFIG_64BIT
 	/*
 	 * If the interrupted code was running with W bit off (32 bit),
 	 * clear the b bits (bits 0 & 1) in the ior.
+	 * save_specials left ipsw value in r8 for us to test.
 	 */
 	extrd,u,*<>     %r8,PSW_W_BIT,1,%r0
 	depdi           0,1,2,%r17
@@ -1192,7 +1187,7 @@ skip_save_ior:
 	loadgp
 
 	copy		%r29, %r25	/* arg1 is pt_regs */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo		-16(%r30),%r29	/* Reference param save area */
 #endif
 
@@ -1230,7 +1225,7 @@ skip_save_ior:
 	spc  = r24	/* space for which the trap occured */
 	ptp = r25	/* page directory/page table pointer */
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 
 dtlb_miss_20w:
 	space_adjust	spc,va,t0
@@ -1487,10 +1482,10 @@ nadtlb_emulate:
 	add,l           %r1,%r24,%r1           /* doesn't affect c/b bits */
 
 nadtlb_nullify:
-	mfctl           %cr22,%r8              /* Get ipsw */
+	mfctl           %ipsw,%r8
 	ldil            L%PSW_N,%r9
 	or              %r8,%r9,%r8            /* Set PSW_N */
-	mtctl           %r8,%cr22
+	mtctl           %r8,%ipsw
 
 	rfir
 	nop
@@ -1521,7 +1516,7 @@ nadtlb_probe_check:
 	nop
 
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 itlb_miss_20w:
 
 	/*
@@ -1588,7 +1583,7 @@ itlb_miss_20:
 
 #endif
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 
 dbit_trap_20w:
 	space_adjust	spc,va,t0
@@ -1797,7 +1792,7 @@ sys_fork_wrapper:
 
 	STREG	%r2,-RP_OFFSET(%r30)
 	ldo	FRAME_SIZE(%r30),%r30
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29		/* Reference param save area */
 #endif
 
@@ -1847,10 +1842,11 @@ sys_clone_wrapper:
 
 	STREG	%r2,-RP_OFFSET(%r30)
 	ldo	FRAME_SIZE(%r30),%r30
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29		/* Reference param save area */
 #endif
 
+	/* WARNING - Clobbers r19 and r21, userspace must save these! */
 	STREG	%r2,PT_GR19(%r1)	/* save for child */
 	STREG	%r30,PT_GR21(%r1)
 	BL	sys_clone,%r2
@@ -1869,7 +1865,7 @@ sys_vfork_wrapper:
 
 	STREG	%r2,-RP_OFFSET(%r30)
 	ldo	FRAME_SIZE(%r30),%r30
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29		/* Reference param save area */
 #endif
 
@@ -1897,10 +1893,10 @@ sys_vfork_wrapper:
 
 	STREG %r2,-RP_OFFSET(%r30)
 	ldo FRAME_SIZE(%r30),%r30
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29		/* Reference param save area */
 #endif
-	bl \execve,%r2
+	BL \execve,%r2
 	copy %r1,%arg0
 
 	ldo -FRAME_SIZE(%r30),%r30
@@ -1923,7 +1919,7 @@ error_\execve:
 sys_execve_wrapper:
 	execve_wrapper sys_execve
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	.export sys32_execve_wrapper
 	.import sys32_execve
 
@@ -1937,7 +1933,7 @@ sys_rt_sigreturn_wrapper:
 	ldo	TASK_REGS(%r26),%r26	/* get pt regs */
 	/* Don't save regs, we are going to restore them from sigcontext. */
 	STREG	%r2, -RP_OFFSET(%r30)
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	FRAME_SIZE(%r30), %r30
 	BL	sys_rt_sigreturn,%r2
 	ldo	-16(%r30),%r29		/* Reference param save area */
@@ -1968,7 +1964,7 @@ sys_sigaltstack_wrapper:
 	ldo	TASK_REGS(%r1),%r24	/* get pt regs */
 	LDREG	TASK_PT_GR30(%r24),%r24
 	STREG	%r2, -RP_OFFSET(%r30)
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	FRAME_SIZE(%r30), %r30
 	b,l	do_sigaltstack,%r2
 	ldo	-16(%r30),%r29		/* Reference param save area */
@@ -1982,7 +1978,7 @@ sys_sigaltstack_wrapper:
 	bv	%r0(%r2)
 	nop
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	.export sys32_sigaltstack_wrapper
 sys32_sigaltstack_wrapper:
 	/* Get the user stack pointer */
@@ -2006,7 +2002,7 @@ sys_rt_sigsuspend_wrapper:
 	reg_save %r24
 
 	STREG	%r2, -RP_OFFSET(%r30)
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	FRAME_SIZE(%r30), %r30
 	b,l	sys_rt_sigsuspend,%r2
 	ldo	-16(%r30),%r29		/* Reference param save area */
@@ -2079,7 +2075,7 @@ syscall_check_bh:
 	ldw     TI_CPU-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r26 /* cpu # */
 
 	/* shift left ____cacheline_aligned (aka L1_CACHE_BYTES) bits */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	shld	%r26, 6, %r20
 #else
 	shlw	%r26, 5, %r20
@@ -2087,9 +2083,6 @@ syscall_check_bh:
 	add     %r19,%r20,%r19	/* now have &irq_stat[smp_processor_id()] */
 #endif /* CONFIG_SMP */
 
-	LDREG   IRQSTAT_SIRQ_PEND(%r19),%r20    /* hardirq.h: unsigned long */
-	cmpib,<>,n 0,%r20,syscall_do_softirq /* forward */
-
 syscall_check_resched:
 
 	/* check for reschedule */
@@ -2144,7 +2137,7 @@ syscall_restore:
 
 	depi	3,31,2,%r31			   /* ensure return to user mode. */
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* decide whether to reset the wide mode bit
 	 *
 	 * For a syscall, the W bit is stored in the lowest bit
@@ -2227,20 +2220,10 @@ pt_regs_ok:
 	b	intr_restore
 	nop
 
-	.import do_softirq,code
-syscall_do_softirq:
-	bl      do_softirq,%r2
-	nop
-	/* NOTE: We enable I-bit incase we schedule later,
-	 * and we might be going back to userspace if we were
-	 * traced. */
-	b       syscall_check_resched
-	ssm     PSW_SM_I, %r0  /* do_softirq returns with I bit off */
-
 	.import schedule,code
 syscall_do_resched:
 	BL	schedule,%r2
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29		/* Reference param save area */
 #else
 	nop
@@ -2260,7 +2243,7 @@ syscall_do_signal:
 
 	ldi	1, %r24				/* unsigned long in_syscall */
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29			/* Reference param save area */
 #endif
 	BL	do_signal,%r2
diff --git a/arch/parisc/kernel/firmware.c b/arch/parisc/kernel/firmware.c
index f244fb200db1..553f8fe03224 100644
--- a/arch/parisc/kernel/firmware.c
+++ b/arch/parisc/kernel/firmware.c
@@ -83,15 +83,15 @@ static unsigned long pdc_result2[32] __attribute__ ((aligned (8)));
 int parisc_narrow_firmware = 1;
 #endif
 
-/* on all currently-supported platforms, IODC I/O calls are always
- * 32-bit calls, and MEM_PDC calls are always the same width as the OS.
- * This means Cxxx boxes can't run wide kernels right now. -PB
+/* On most currently-supported platforms, IODC I/O calls are 32-bit calls
+ * and MEM_PDC calls are always the same width as the OS.
+ * Some PAT boxes may have 64-bit IODC I/O.
  *
- * CONFIG_PDC_NARROW has been added to allow 64-bit kernels to run on
- * systems with 32-bit MEM_PDC calls. This will allow wide kernels to
- * run on Cxxx boxes now. -RB
- *
- * Note that some PAT boxes may have 64-bit IODC I/O...
+ * Ryan Bradetich added the now obsolete CONFIG_PDC_NARROW to allow
+ * 64-bit kernels to run on systems with 32-bit MEM_PDC calls.
+ * This allowed wide kernels to run on Cxxx boxes.
+ * We now detect 32-bit-only PDC and dynamically switch to 32-bit mode
+ * when running a 64-bit kernel on such boxes (e.g. C200 or C360).
  */
 
 #ifdef __LP64__
diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S
index 28405edf8448..0b47afc20690 100644
--- a/arch/parisc/kernel/head.S
+++ b/arch/parisc/kernel/head.S
@@ -12,7 +12,7 @@
  * Initial Version 04-23-1999 by Helge Deller <deller@gmx.de>
  */
 
-#include <linux/autoconf.h>	/* for CONFIG_SMP */
+#include <linux/config.h>	/* for CONFIG_SMP */
 
 #include <asm/asm-offsets.h>
 #include <asm/psw.h>
@@ -36,10 +36,10 @@ boot_args:
 	.align	4
 	.import init_thread_union,data
 	.import fault_vector_20,code    /* IVA parisc 2.0 32 bit */
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
         .import fault_vector_11,code    /* IVA parisc 1.1 32 bit */
 	.import	$global$		/* forward declaration */
-#endif /*!LP64*/
+#endif /*!CONFIG_64BIT*/
 	.export stext
 	.export _stext,data		/* Kernel want it this way! */
 _stext:
@@ -76,7 +76,7 @@ $bss_loop:
 	mtctl		%r4,%cr24	/* Initialize kernel root pointer */
 	mtctl		%r4,%cr25	/* Initialize user root pointer */
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* Set pmd in pgd */
 	load32		PA(pmd0),%r5
 	shrd            %r5,PxD_VALUE_SHIFT,%r3	
@@ -99,7 +99,7 @@ $bss_loop:
 	stw		%r3,0(%r4)
 	ldo		(ASM_PAGE_SIZE >> PxD_VALUE_SHIFT)(%r3),%r3
 	addib,>		-1,%r1,1b
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo             ASM_PMD_ENTRY_SIZE(%r4),%r4
 #else
 	ldo             ASM_PGD_ENTRY_SIZE(%r4),%r4
@@ -170,7 +170,7 @@ common_stext:
 	stw		%r0,0x28(%r0)	/* MEM_RENDEZ_HI */
 #endif /*CONFIG_SMP*/
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	tophys_r1	%sp
 
 	/* Save the rfi target address */
@@ -224,8 +224,6 @@ stext_pdc_ret:
 	mtctl	%r0,%cr12
 	mtctl	%r0,%cr13
 
-	/* Prepare to RFI! Man all the cannons! */
-
 	/* Initialize the global data pointer */
 	loadgp
 
@@ -235,7 +233,7 @@ stext_pdc_ret:
 	 * following short sequence of instructions can determine this
 	 * (without being illegal on a PA1.1 machine).
 	 */
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 	ldi		32,%r10
 	mtctl		%r10,%cr11
 	.level 2.0
@@ -248,52 +246,22 @@ stext_pdc_ret:
 
 $is_pa20:
 	.level		LEVEL /* restore 1.1 || 2.0w */
-#endif /*!LP64*/
+#endif /*!CONFIG_64BIT*/
 	load32		PA(fault_vector_20),%r10
 
 $install_iva:
 	mtctl		%r10,%cr14
 
-#ifdef __LP64__
-	b		aligned_rfi
+	b		aligned_rfi  /* Prepare to RFI! Man all the cannons! */
 	nop
 
-	.align          256
+	.align 128
 aligned_rfi:
-	ssm             0,0
-	nop             /* 1 */
-	nop             /* 2 */
-	nop             /* 3 */
-	nop             /* 4 */
-	nop             /* 5 */
-	nop             /* 6 */
-	nop             /* 7 */
-	nop             /* 8 */
-#endif
+	pcxt_ssm_bug
 
-#ifdef __LP64__ /* move to psw.h? */
-#define		PSW_BITS	PSW_Q+PSW_I+PSW_D+PSW_P+PSW_R
-#else
-#define		PSW_BITS	PSW_SM_Q
-#endif
+	rsm		PSW_SM_QUIET,%r0	/* off troublesome PSW bits */
+	/* Don't need NOPs, have 8 compliant insn before rfi */
 
-$rfi:	
-	/* turn off troublesome PSW bits */
-	rsm		PSW_BITS,%r0
-
-	/* kernel PSW:
-	 *  - no interruptions except HPMC and TOC (which are handled by PDC)
-	 *  - Q bit set (IODC / PDC interruptions)
-	 *  - big-endian
-	 *  - virtually mapped
-	 */
-	load32		KERNEL_PSW,%r10
-	mtctl		%r10,%ipsw
-
-	/* Set the space pointers for the post-RFI world
-	** Clear the two-level IIA Space Queue, effectively setting
-	** Kernel space.
-	*/
 	mtctl		%r0,%cr17	/* Clear IIASQ tail */
 	mtctl		%r0,%cr17	/* Clear IIASQ head */
 
@@ -301,8 +269,11 @@ $rfi:
 	mtctl		%r11,%cr18	/* IIAOQ head */
 	ldo		4(%r11),%r11
 	mtctl		%r11,%cr18	/* IIAOQ tail */
+
+	load32		KERNEL_PSW,%r10
+	mtctl		%r10,%ipsw
 	
-	/* Jump to hyperspace */
+	/* Jump through hyperspace to Virt Mode */
 	rfi
 	nop
 
@@ -313,7 +284,7 @@ $rfi:
 	.import smp_init_current_idle_task,data
 	.import	smp_callin,code
 
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 smp_callin_rtn:
         .proc
 	.callinfo
@@ -321,7 +292,7 @@ smp_callin_rtn:
 	nop
 	nop
         .procend
-#endif /*!LP64*/
+#endif /*!CONFIG_64BIT*/
 
 /***************************************************************************
 * smp_slave_stext is executed by all non-monarch Processors when the Monarch
@@ -356,7 +327,7 @@ smp_slave_stext:
 	mtctl		%r4,%cr24	/* Initialize kernel root pointer */
 	mtctl		%r4,%cr25	/* Initialize user root pointer */
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* Setup PDCE_PROC entry */
 	copy            %arg0,%r3
 #else
@@ -373,7 +344,7 @@ smp_slave_stext:
 
 	.procend
 #endif /* CONFIG_SMP */
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 	.data
 
 	.align	4
@@ -383,4 +354,4 @@ smp_slave_stext:
 	.size	$global$,4
 $global$:	
 	.word 0
-#endif /*!LP64*/
+#endif /*!CONFIG_64BIT*/
diff --git a/arch/parisc/kernel/inventory.c b/arch/parisc/kernel/inventory.c
index 1a1c66422736..8f563871e83c 100644
--- a/arch/parisc/kernel/inventory.c
+++ b/arch/parisc/kernel/inventory.c
@@ -188,7 +188,7 @@ pat_query_module(ulong pcell_loc, ulong mod_index)
 	temp = pa_pdc_cell.cba;
 	dev = alloc_pa_dev(PAT_GET_CBA(temp), &pa_pdc_cell.mod_path);
 	if (!dev) {
-		return PDC_NE_MOD;
+		return PDC_OK;
 	}
 
 	/* alloc_pa_dev sets dev->hpa */
diff --git a/arch/parisc/kernel/ioctl32.c b/arch/parisc/kernel/ioctl32.c
index 1d3824b670d1..4eada1bb27f0 100644
--- a/arch/parisc/kernel/ioctl32.c
+++ b/arch/parisc/kernel/ioctl32.c
@@ -19,550 +19,6 @@
 #define CODE
 #include "compat_ioctl.c"
 
-/* Use this to get at 32-bit user passed pointers. 
-   See sys_sparc32.c for description about these. */
-#define A(__x) ((unsigned long)(__x))
-/* The same for use with copy_from_user() and copy_to_user(). */
-#define B(__x) ((void *)(unsigned long)(__x))
-
-#if defined(CONFIG_DRM) || defined(CONFIG_DRM_MODULE)
-/* This really belongs in include/linux/drm.h -DaveM */
-#include "../../../drivers/char/drm/drm.h"
-
-typedef struct drm32_version {
-	int    version_major;	  /* Major version			    */
-	int    version_minor;	  /* Minor version			    */
-	int    version_patchlevel;/* Patch level			    */
-	int    name_len;	  /* Length of name buffer		    */
-	u32    name;		  /* Name of driver			    */
-	int    date_len;	  /* Length of date buffer		    */
-	u32    date;		  /* User-space buffer to hold date	    */
-	int    desc_len;	  /* Length of desc buffer		    */
-	u32    desc;		  /* User-space buffer to hold desc	    */
-} drm32_version_t;
-#define DRM32_IOCTL_VERSION    DRM_IOWR(0x00, drm32_version_t)
-
-static int drm32_version(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	drm32_version_t *uversion = (drm32_version_t *)arg;
-	char *name_ptr, *date_ptr, *desc_ptr;
-	u32 tmp1, tmp2, tmp3;
-	drm_version_t kversion;
-	mm_segment_t old_fs;
-	int ret;
-
-	memset(&kversion, 0, sizeof(kversion));
-	if (get_user(kversion.name_len, &uversion->name_len) ||
-	    get_user(kversion.date_len, &uversion->date_len) ||
-	    get_user(kversion.desc_len, &uversion->desc_len) ||
-	    get_user(tmp1, &uversion->name) ||
-	    get_user(tmp2, &uversion->date) ||
-	    get_user(tmp3, &uversion->desc))
-		return -EFAULT;
-
-	name_ptr = (char *) A(tmp1);
-	date_ptr = (char *) A(tmp2);
-	desc_ptr = (char *) A(tmp3);
-
-	ret = -ENOMEM;
-	if (kversion.name_len && name_ptr) {
-		kversion.name = kmalloc(kversion.name_len, GFP_KERNEL);
-		if (!kversion.name)
-			goto out;
-	}
-	if (kversion.date_len && date_ptr) {
-		kversion.date = kmalloc(kversion.date_len, GFP_KERNEL);
-		if (!kversion.date)
-			goto out;
-	}
-	if (kversion.desc_len && desc_ptr) {
-		kversion.desc = kmalloc(kversion.desc_len, GFP_KERNEL);
-		if (!kversion.desc)
-			goto out;
-	}
-
-        old_fs = get_fs();
-	set_fs(KERNEL_DS);
-        ret = sys_ioctl (fd, DRM_IOCTL_VERSION, (unsigned long)&kversion);
-        set_fs(old_fs);
-
-	if (!ret) {
-		if ((kversion.name &&
-		     copy_to_user(name_ptr, kversion.name, kversion.name_len)) ||
-		    (kversion.date &&
-		     copy_to_user(date_ptr, kversion.date, kversion.date_len)) ||
-		    (kversion.desc &&
-		     copy_to_user(desc_ptr, kversion.desc, kversion.desc_len)))
-			ret = -EFAULT;
-		if (put_user(kversion.version_major, &uversion->version_major) ||
-		    put_user(kversion.version_minor, &uversion->version_minor) ||
-		    put_user(kversion.version_patchlevel, &uversion->version_patchlevel) ||
-		    put_user(kversion.name_len, &uversion->name_len) ||
-		    put_user(kversion.date_len, &uversion->date_len) ||
-		    put_user(kversion.desc_len, &uversion->desc_len))
-			ret = -EFAULT;
-	}
-
-out:
-	if (kversion.name)
-		kfree(kversion.name);
-	if (kversion.date)
-		kfree(kversion.date);
-	if (kversion.desc)
-		kfree(kversion.desc);
-	return ret;
-}
-
-typedef struct drm32_unique {
-	int	unique_len;	  /* Length of unique			    */
-	u32	unique;		  /* Unique name for driver instantiation   */
-} drm32_unique_t;
-#define DRM32_IOCTL_GET_UNIQUE DRM_IOWR(0x01, drm32_unique_t)
-#define DRM32_IOCTL_SET_UNIQUE DRM_IOW( 0x10, drm32_unique_t)
-
-static int drm32_getsetunique(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	drm32_unique_t *uarg = (drm32_unique_t *)arg;
-	drm_unique_t karg;
-	mm_segment_t old_fs;
-	char *uptr;
-	u32 tmp;
-	int ret;
-
-	if (get_user(karg.unique_len, &uarg->unique_len))
-		return -EFAULT;
-	karg.unique = NULL;
-
-	if (get_user(tmp, &uarg->unique))
-		return -EFAULT;
-
-	uptr = (char *) A(tmp);
-
-	if (uptr) {
-		karg.unique = kmalloc(karg.unique_len, GFP_KERNEL);
-		if (!karg.unique)
-			return -ENOMEM;
-		if (cmd == DRM32_IOCTL_SET_UNIQUE &&
-		    copy_from_user(karg.unique, uptr, karg.unique_len)) {
-			kfree(karg.unique);
-			return -EFAULT;
-		}
-	}
-
-	old_fs = get_fs();
-	set_fs(KERNEL_DS);
-	if (cmd == DRM32_IOCTL_GET_UNIQUE)
-		ret = sys_ioctl (fd, DRM_IOCTL_GET_UNIQUE, (unsigned long)&karg);
-	else
-		ret = sys_ioctl (fd, DRM_IOCTL_SET_UNIQUE, (unsigned long)&karg);
-        set_fs(old_fs);
-
-	if (!ret) {
-		if (cmd == DRM32_IOCTL_GET_UNIQUE &&
-		    uptr != NULL &&
-		    copy_to_user(uptr, karg.unique, karg.unique_len))
-			ret = -EFAULT;
-		if (put_user(karg.unique_len, &uarg->unique_len))
-			ret = -EFAULT;
-	}
-
-	if (karg.unique != NULL)
-		kfree(karg.unique);
-
-	return ret;
-}
-
-typedef struct drm32_map {
-	u32		offset;	 /* Requested physical address (0 for SAREA)*/
-	u32		size;	 /* Requested physical size (bytes)	    */
-	drm_map_type_t	type;	 /* Type of memory to map		    */
-	drm_map_flags_t flags;	 /* Flags				    */
-	u32		handle;  /* User-space: "Handle" to pass to mmap    */
-				 /* Kernel-space: kernel-virtual address    */
-	int		mtrr;	 /* MTRR slot used			    */
-				 /* Private data			    */
-} drm32_map_t;
-#define DRM32_IOCTL_ADD_MAP    DRM_IOWR(0x15, drm32_map_t)
-
-static int drm32_addmap(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	drm32_map_t *uarg = (drm32_map_t *) arg;
-	drm_map_t karg;
-	mm_segment_t old_fs;
-	u32 tmp;
-	int ret;
-
-	ret  = get_user(karg.offset, &uarg->offset);
-	ret |= get_user(karg.size, &uarg->size);
-	ret |= get_user(karg.type, &uarg->type);
-	ret |= get_user(karg.flags, &uarg->flags);
-	ret |= get_user(tmp, &uarg->handle);
-	ret |= get_user(karg.mtrr, &uarg->mtrr);
-	if (ret)
-		return -EFAULT;
-
-	karg.handle = (void *) A(tmp);
-
-	old_fs = get_fs();
-	set_fs(KERNEL_DS);
-	ret = sys_ioctl(fd, DRM_IOCTL_ADD_MAP, (unsigned long) &karg);
-	set_fs(old_fs);
-
-	if (!ret) {
-		ret  = put_user(karg.offset, &uarg->offset);
-		ret |= put_user(karg.size, &uarg->size);
-		ret |= put_user(karg.type, &uarg->type);
-		ret |= put_user(karg.flags, &uarg->flags);
-		tmp = (u32) (long)karg.handle;
-		ret |= put_user(tmp, &uarg->handle);
-		ret |= put_user(karg.mtrr, &uarg->mtrr);
-		if (ret)
-			ret = -EFAULT;
-	}
-
-	return ret;
-}
-
-typedef struct drm32_buf_info {
-	int	       count;	/* Entries in list			     */
-	u32	       list;    /* (drm_buf_desc_t *) */ 
-} drm32_buf_info_t;
-#define DRM32_IOCTL_INFO_BUFS  DRM_IOWR(0x18, drm32_buf_info_t)
-
-static int drm32_info_bufs(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	drm32_buf_info_t *uarg = (drm32_buf_info_t *)arg;
-	drm_buf_desc_t *ulist;
-	drm_buf_info_t karg;
-	mm_segment_t old_fs;
-	int orig_count, ret;
-	u32 tmp;
-
-	if (get_user(karg.count, &uarg->count) ||
-	    get_user(tmp, &uarg->list))
-		return -EFAULT;
-
-	ulist = (drm_buf_desc_t *) A(tmp);
-
-	orig_count = karg.count;
-
-	karg.list = kmalloc(karg.count * sizeof(drm_buf_desc_t), GFP_KERNEL);
-	if (!karg.list)
-		return -EFAULT;
-
-	old_fs = get_fs();
-	set_fs(KERNEL_DS);
-	ret = sys_ioctl(fd, DRM_IOCTL_INFO_BUFS, (unsigned long) &karg);
-	set_fs(old_fs);
-
-	if (!ret) {
-		if (karg.count <= orig_count &&
-		    (copy_to_user(ulist, karg.list,
-				  karg.count * sizeof(drm_buf_desc_t))))
-			ret = -EFAULT;
-		if (put_user(karg.count, &uarg->count))
-			ret = -EFAULT;
-	}
-
-	kfree(karg.list);
-
-	return ret;
-}
-
-typedef struct drm32_buf_free {
-	int	       count;
-	u32	       list;	/* (int *) */
-} drm32_buf_free_t;
-#define DRM32_IOCTL_FREE_BUFS  DRM_IOW( 0x1a, drm32_buf_free_t)
-
-static int drm32_free_bufs(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	drm32_buf_free_t *uarg = (drm32_buf_free_t *)arg;
-	drm_buf_free_t karg;
-	mm_segment_t old_fs;
-	int *ulist;
-	int ret;
-	u32 tmp;
-
-	if (get_user(karg.count, &uarg->count) ||
-	    get_user(tmp, &uarg->list))
-		return -EFAULT;
-
-	ulist = (int *) A(tmp);
-
-	karg.list = kmalloc(karg.count * sizeof(int), GFP_KERNEL);
-	if (!karg.list)
-		return -ENOMEM;
-
-	ret = -EFAULT;
-	if (copy_from_user(karg.list, ulist, (karg.count * sizeof(int))))
-		goto out;
-
-	old_fs = get_fs();
-	set_fs(KERNEL_DS);
-	ret = sys_ioctl(fd, DRM_IOCTL_FREE_BUFS, (unsigned long) &karg);
-	set_fs(old_fs);
-
-out:
-	kfree(karg.list);
-
-	return ret;
-}
-
-typedef struct drm32_buf_pub {
-	int		  idx;	       /* Index into master buflist	     */
-	int		  total;       /* Buffer size			     */
-	int		  used;	       /* Amount of buffer in use (for DMA)  */
-	u32		  address;     /* Address of buffer (void *)	     */
-} drm32_buf_pub_t;
-
-typedef struct drm32_buf_map {
-	int	      count;	/* Length of buflist			    */
-	u32	      virtual;	/* Mmaped area in user-virtual (void *)	    */
-	u32 	      list;	/* Buffer information (drm_buf_pub_t *)	    */
-} drm32_buf_map_t;
-#define DRM32_IOCTL_MAP_BUFS   DRM_IOWR(0x19, drm32_buf_map_t)
-
-static int drm32_map_bufs(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	drm32_buf_map_t *uarg = (drm32_buf_map_t *)arg;
-	drm32_buf_pub_t *ulist;
-	drm_buf_map_t karg;
-	mm_segment_t old_fs;
-	int orig_count, ret, i;
-	u32 tmp1, tmp2;
-
-	if (get_user(karg.count, &uarg->count) ||
-	    get_user(tmp1, &uarg->virtual) ||
-	    get_user(tmp2, &uarg->list))
-		return -EFAULT;
-
-	karg.virtual = (void *) A(tmp1);
-	ulist = (drm32_buf_pub_t *) A(tmp2);
-
-	orig_count = karg.count;
-
-	karg.list = kmalloc(karg.count * sizeof(drm_buf_pub_t), GFP_KERNEL);
-	if (!karg.list)
-		return -ENOMEM;
-
-	ret = -EFAULT;
-	for (i = 0; i < karg.count; i++) {
-		if (get_user(karg.list[i].idx, &ulist[i].idx) ||
-		    get_user(karg.list[i].total, &ulist[i].total) ||
-		    get_user(karg.list[i].used, &ulist[i].used) ||
-		    get_user(tmp1, &ulist[i].address))
-			goto out;
-
-		karg.list[i].address = (void *) A(tmp1);
-	}
-
-	old_fs = get_fs();
-	set_fs(KERNEL_DS);
-	ret = sys_ioctl(fd, DRM_IOCTL_MAP_BUFS, (unsigned long) &karg);
-	set_fs(old_fs);
-
-	if (!ret) {
-		for (i = 0; i < orig_count; i++) {
-			tmp1 = (u32) (long) karg.list[i].address;
-			if (put_user(karg.list[i].idx, &ulist[i].idx) ||
-			    put_user(karg.list[i].total, &ulist[i].total) ||
-			    put_user(karg.list[i].used, &ulist[i].used) ||
-			    put_user(tmp1, &ulist[i].address)) {
-				ret = -EFAULT;
-				goto out;
-			}
-		}
-		if (put_user(karg.count, &uarg->count))
-			ret = -EFAULT;
-	}
-
-out:
-	kfree(karg.list);
-	return ret;
-}
-
-typedef struct drm32_dma {
-				/* Indices here refer to the offset into
-				   buflist in drm_buf_get_t.  */
-	int		context;	  /* Context handle		    */
-	int		send_count;	  /* Number of buffers to send	    */
-	u32		send_indices;	  /* List of handles to buffers (int *) */
-	u32		send_sizes;	  /* Lengths of data to send (int *) */
-	drm_dma_flags_t flags;		  /* Flags			    */
-	int		request_count;	  /* Number of buffers requested    */
-	int		request_size;	  /* Desired size for buffers	    */
-	u32		request_indices;  /* Buffer information (int *)	    */
-	u32		request_sizes;    /* (int *) */
-	int		granted_count;	  /* Number of buffers granted	    */
-} drm32_dma_t;
-#define DRM32_IOCTL_DMA	     DRM_IOWR(0x29, drm32_dma_t)
-
-/* RED PEN	The DRM layer blindly dereferences the send/request
- * 		indice/size arrays even though they are userland
- * 		pointers.  -DaveM
- */
-static int drm32_dma(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	drm32_dma_t *uarg = (drm32_dma_t *) arg;
-	int *u_si, *u_ss, *u_ri, *u_rs;
-	drm_dma_t karg;
-	mm_segment_t old_fs;
-	int ret;
-	u32 tmp1, tmp2, tmp3, tmp4;
-
-	karg.send_indices = karg.send_sizes = NULL;
-	karg.request_indices = karg.request_sizes = NULL;
-
-	if (get_user(karg.context, &uarg->context) ||
-	    get_user(karg.send_count, &uarg->send_count) ||
-	    get_user(tmp1, &uarg->send_indices) ||
-	    get_user(tmp2, &uarg->send_sizes) ||
-	    get_user(karg.flags, &uarg->flags) ||
-	    get_user(karg.request_count, &uarg->request_count) ||
-	    get_user(karg.request_size, &uarg->request_size) ||
-	    get_user(tmp3, &uarg->request_indices) ||
-	    get_user(tmp4, &uarg->request_sizes) ||
-	    get_user(karg.granted_count, &uarg->granted_count))
-		return -EFAULT;
-
-	u_si = (int *) A(tmp1);
-	u_ss = (int *) A(tmp2);
-	u_ri = (int *) A(tmp3);
-	u_rs = (int *) A(tmp4);
-
-	if (karg.send_count) {
-		karg.send_indices = kmalloc(karg.send_count * sizeof(int), GFP_KERNEL);
-		karg.send_sizes = kmalloc(karg.send_count * sizeof(int), GFP_KERNEL);
-
-		ret = -ENOMEM;
-		if (!karg.send_indices || !karg.send_sizes)
-			goto out;
-
-		ret = -EFAULT;
-		if (copy_from_user(karg.send_indices, u_si,
-				   (karg.send_count * sizeof(int))) ||
-		    copy_from_user(karg.send_sizes, u_ss,
-				   (karg.send_count * sizeof(int))))
-			goto out;
-	}
-
-	if (karg.request_count) {
-		karg.request_indices = kmalloc(karg.request_count * sizeof(int), GFP_KERNEL);
-		karg.request_sizes = kmalloc(karg.request_count * sizeof(int), GFP_KERNEL);
-
-		ret = -ENOMEM;
-		if (!karg.request_indices || !karg.request_sizes)
-			goto out;
-
-		ret = -EFAULT;
-		if (copy_from_user(karg.request_indices, u_ri,
-				   (karg.request_count * sizeof(int))) ||
-		    copy_from_user(karg.request_sizes, u_rs,
-				   (karg.request_count * sizeof(int))))
-			goto out;
-	}
-
-	old_fs = get_fs();
-	set_fs(KERNEL_DS);
-	ret = sys_ioctl(fd, DRM_IOCTL_DMA, (unsigned long) &karg);
-	set_fs(old_fs);
-
-	if (!ret) {
-		if (put_user(karg.context, &uarg->context) ||
-		    put_user(karg.send_count, &uarg->send_count) ||
-		    put_user(karg.flags, &uarg->flags) ||
-		    put_user(karg.request_count, &uarg->request_count) ||
-		    put_user(karg.request_size, &uarg->request_size) ||
-		    put_user(karg.granted_count, &uarg->granted_count))
-			ret = -EFAULT;
-
-		if (karg.send_count) {
-			if (copy_to_user(u_si, karg.send_indices,
-					 (karg.send_count * sizeof(int))) ||
-			    copy_to_user(u_ss, karg.send_sizes,
-					 (karg.send_count * sizeof(int))))
-				ret = -EFAULT;
-		}
-		if (karg.request_count) {
-			if (copy_to_user(u_ri, karg.request_indices,
-					 (karg.request_count * sizeof(int))) ||
-			    copy_to_user(u_rs, karg.request_sizes,
-					 (karg.request_count * sizeof(int))))
-				ret = -EFAULT;
-		}
-	}
-
-out:
-	if (karg.send_indices)
-		kfree(karg.send_indices);
-	if (karg.send_sizes)
-		kfree(karg.send_sizes);
-	if (karg.request_indices)
-		kfree(karg.request_indices);
-	if (karg.request_sizes)
-		kfree(karg.request_sizes);
-
-	return ret;
-}
-
-typedef struct drm32_ctx_res {
-	int		count;
-	u32		contexts; /* (drm_ctx_t *) */
-} drm32_ctx_res_t;
-#define DRM32_IOCTL_RES_CTX    DRM_IOWR(0x26, drm32_ctx_res_t)
-
-static int drm32_res_ctx(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	drm32_ctx_res_t *uarg = (drm32_ctx_res_t *) arg;
-	drm_ctx_t *ulist;
-	drm_ctx_res_t karg;
-	mm_segment_t old_fs;
-	int orig_count, ret;
-	u32 tmp;
-
-	karg.contexts = NULL;
-	if (get_user(karg.count, &uarg->count) ||
-	    get_user(tmp, &uarg->contexts))
-		return -EFAULT;
-
-	ulist = (drm_ctx_t *) A(tmp);
-
-	orig_count = karg.count;
-	if (karg.count && ulist) {
-		karg.contexts = kmalloc((karg.count * sizeof(drm_ctx_t)), GFP_KERNEL);
-		if (!karg.contexts)
-			return -ENOMEM;
-		if (copy_from_user(karg.contexts, ulist,
-				   (karg.count * sizeof(drm_ctx_t)))) {
-			kfree(karg.contexts);
-			return -EFAULT;
-		}
-	}
-
-	old_fs = get_fs();
-	set_fs(KERNEL_DS);
-	ret = sys_ioctl(fd, DRM_IOCTL_RES_CTX, (unsigned long) &karg);
-	set_fs(old_fs);
-
-	if (!ret) {
-		if (orig_count) {
-			if (copy_to_user(ulist, karg.contexts,
-					 (orig_count * sizeof(drm_ctx_t))))
-				ret = -EFAULT;
-		}
-		if (put_user(karg.count, &uarg->count))
-			ret = -EFAULT;
-	}
-
-	if (karg.contexts)
-		kfree(karg.contexts);
-
-	return ret;
-}
-
-#endif
-
 #define HANDLE_IOCTL(cmd, handler) { cmd, (ioctl_trans_handler_t)handler, NULL },
 #define COMPATIBLE_IOCTL(cmd) HANDLE_IOCTL(cmd, sys_ioctl) 
 
@@ -575,16 +31,6 @@ IOCTL_TABLE_START
 #define DECLARES
 #include "compat_ioctl.c"
 
-/* Might be moved to compat_ioctl.h with some ifdefs... */
-COMPATIBLE_IOCTL(TIOCSTART)
-COMPATIBLE_IOCTL(TIOCSTOP)
-COMPATIBLE_IOCTL(TIOCSLTC)
-
-/* PA-specific ioctls */
-COMPATIBLE_IOCTL(PA_PERF_ON)
-COMPATIBLE_IOCTL(PA_PERF_OFF)
-COMPATIBLE_IOCTL(PA_PERF_VERSION)
-
 /* And these ioctls need translation */
 HANDLE_IOCTL(SIOCGPPPSTATS, dev_ifsioc)
 HANDLE_IOCTL(SIOCGPPPCSTATS, dev_ifsioc)
@@ -609,17 +55,6 @@ HANDLE_IOCTL(RTC_EPOCH_READ, w_long)
 COMPATIBLE_IOCTL(RTC_EPOCH_SET)
 #endif
 
-#if defined(CONFIG_DRM) || defined(CONFIG_DRM_MODULE)
-HANDLE_IOCTL(DRM32_IOCTL_VERSION, drm32_version);
-HANDLE_IOCTL(DRM32_IOCTL_GET_UNIQUE, drm32_getsetunique);
-HANDLE_IOCTL(DRM32_IOCTL_SET_UNIQUE, drm32_getsetunique);
-HANDLE_IOCTL(DRM32_IOCTL_ADD_MAP, drm32_addmap);
-HANDLE_IOCTL(DRM32_IOCTL_INFO_BUFS, drm32_info_bufs);
-HANDLE_IOCTL(DRM32_IOCTL_FREE_BUFS, drm32_free_bufs);
-HANDLE_IOCTL(DRM32_IOCTL_MAP_BUFS, drm32_map_bufs);
-HANDLE_IOCTL(DRM32_IOCTL_DMA, drm32_dma);
-HANDLE_IOCTL(DRM32_IOCTL_RES_CTX, drm32_res_ctx);
-#endif /* DRM */
 IOCTL_TABLE_END
 
 int ioctl_table_size = ARRAY_SIZE(ioctl_start);
diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c
index 006385dbee66..197936d9359a 100644
--- a/arch/parisc/kernel/irq.c
+++ b/arch/parisc/kernel/irq.c
@@ -30,6 +30,9 @@
 #include <linux/seq_file.h>
 #include <linux/spinlock.h>
 #include <linux/types.h>
+#include <asm/io.h>
+
+#include <asm/smp.h>
 
 #undef PARISC_IRQ_CR16_COUNTS
 
@@ -43,26 +46,34 @@ extern irqreturn_t ipi_interrupt(int, void *, struct pt_regs *);
 */
 static volatile unsigned long cpu_eiem = 0;
 
-static void cpu_set_eiem(void *info)
-{
-	set_eiem((unsigned long) info);
-}
-
-static inline void cpu_disable_irq(unsigned int irq)
+static void cpu_disable_irq(unsigned int irq)
 {
 	unsigned long eirr_bit = EIEM_MASK(irq);
 
 	cpu_eiem &= ~eirr_bit;
-        on_each_cpu(cpu_set_eiem, (void *) cpu_eiem, 1, 1);
+	/* Do nothing on the other CPUs.  If they get this interrupt,
+	 * The & cpu_eiem in the do_cpu_irq_mask() ensures they won't
+	 * handle it, and the set_eiem() at the bottom will ensure it
+	 * then gets disabled */
 }
 
 static void cpu_enable_irq(unsigned int irq)
 {
 	unsigned long eirr_bit = EIEM_MASK(irq);
 
-	mtctl(eirr_bit, 23);	/* clear EIRR bit before unmasking */
 	cpu_eiem |= eirr_bit;
-        on_each_cpu(cpu_set_eiem, (void *) cpu_eiem, 1, 1);
+
+	/* FIXME: while our interrupts aren't nested, we cannot reset
+	 * the eiem mask if we're already in an interrupt.  Once we
+	 * implement nested interrupts, this can go away
+	 */
+	if (!in_interrupt())
+		set_eiem(cpu_eiem);
+
+	/* This is just a simple NOP IPI.  But what it does is cause
+	 * all the other CPUs to do a set_eiem(cpu_eiem) at the end
+	 * of the interrupt handler */
+	smp_send_all_nop();
 }
 
 static unsigned int cpu_startup_irq(unsigned int irq)
@@ -74,6 +85,35 @@ static unsigned int cpu_startup_irq(unsigned int irq)
 void no_ack_irq(unsigned int irq) { }
 void no_end_irq(unsigned int irq) { }
 
+#ifdef CONFIG_SMP
+int cpu_check_affinity(unsigned int irq, cpumask_t *dest)
+{
+	int cpu_dest;
+
+	/* timer and ipi have to always be received on all CPUs */
+	if (irq == TIMER_IRQ || irq == IPI_IRQ) {
+		/* Bad linux design decision.  The mask has already
+		 * been set; we must reset it */
+		irq_affinity[irq] = CPU_MASK_ALL;
+		return -EINVAL;
+	}
+
+	/* whatever mask they set, we just allow one CPU */
+	cpu_dest = first_cpu(*dest);
+	*dest = cpumask_of_cpu(cpu_dest);
+
+	return 0;
+}
+
+static void cpu_set_affinity_irq(unsigned int irq, cpumask_t dest)
+{
+	if (cpu_check_affinity(irq, &dest))
+		return;
+
+	irq_affinity[irq] = dest;
+}
+#endif
+
 static struct hw_interrupt_type cpu_interrupt_type = {
 	.typename	= "CPU",
 	.startup	= cpu_startup_irq,
@@ -82,7 +122,9 @@ static struct hw_interrupt_type cpu_interrupt_type = {
 	.disable	= cpu_disable_irq,
 	.ack		= no_ack_irq,
 	.end		= no_end_irq,
-//	.set_affinity	= cpu_set_affinity_irq,
+#ifdef CONFIG_SMP
+	.set_affinity	= cpu_set_affinity_irq,
+#endif
 };
 
 int show_interrupts(struct seq_file *p, void *v)
@@ -219,6 +261,17 @@ int txn_alloc_irq(unsigned int bits_wide)
 	return -1;
 }
 
+
+unsigned long txn_affinity_addr(unsigned int irq, int cpu)
+{
+#ifdef CONFIG_SMP
+	irq_affinity[irq] = cpumask_of_cpu(cpu);
+#endif
+
+	return cpu_data[cpu].txn_addr;
+}
+
+
 unsigned long txn_alloc_addr(unsigned int virt_irq)
 {
 	static int next_cpu = -1;
@@ -233,7 +286,7 @@ unsigned long txn_alloc_addr(unsigned int virt_irq)
 	if (next_cpu >= NR_CPUS) 
 		next_cpu = 0;	/* nothing else, assign monarch */
 
-	return cpu_data[next_cpu].txn_addr;
+	return txn_affinity_addr(virt_irq, next_cpu);
 }
 
 
@@ -250,10 +303,11 @@ void do_cpu_irq_mask(struct pt_regs *regs)
 	irq_enter();
 
 	/*
-	 * Only allow interrupt processing to be interrupted by the
-	 * timer tick
+	 * Don't allow TIMER or IPI nested interrupts.
+	 * Allowing any single interrupt to nest can lead to that CPU
+	 * handling interrupts with all enabled interrupts unmasked.
 	 */
-	set_eiem(EIEM_MASK(TIMER_IRQ));
+	set_eiem(0UL);
 
 	/* 1) only process IRQs that are enabled/unmasked (cpu_eiem)
 	 * 2) We loop here on EIRR contents in order to avoid
@@ -267,23 +321,41 @@ void do_cpu_irq_mask(struct pt_regs *regs)
 		if (!eirr_val)
 			break;
 
-		if (eirr_val & EIEM_MASK(TIMER_IRQ))
-			set_eiem(0);
-
 		mtctl(eirr_val, 23); /* reset bits we are going to process */
 
 		/* Work our way from MSb to LSb...same order we alloc EIRs */
 		for (irq = TIMER_IRQ; eirr_val && bit; bit>>=1, irq++) {
+#ifdef CONFIG_SMP
+			cpumask_t dest = irq_affinity[irq];
+#endif
 			if (!(bit & eirr_val))
 				continue;
 
 			/* clear bit in mask - can exit loop sooner */
 			eirr_val &= ~bit;
 
+#ifdef CONFIG_SMP
+			/* FIXME: because generic set affinity mucks
+			 * with the affinity before sending it to us
+			 * we can get the situation where the affinity is
+			 * wrong for our CPU type interrupts */
+			if (irq != TIMER_IRQ && irq != IPI_IRQ &&
+			    !cpu_isset(smp_processor_id(), dest)) {
+				int cpu = first_cpu(dest);
+
+				printk(KERN_DEBUG "redirecting irq %d from CPU %d to %d\n",
+				       irq, smp_processor_id(), cpu);
+				gsc_writel(irq + CPU_IRQ_BASE,
+					   cpu_data[cpu].hpa);
+				continue;
+			}
+#endif
+
 			__do_IRQ(irq, regs);
 		}
 	}
-	set_eiem(cpu_eiem);
+
+	set_eiem(cpu_eiem);	/* restore original mask */
 	irq_exit();
 }
 
@@ -291,12 +363,14 @@ void do_cpu_irq_mask(struct pt_regs *regs)
 static struct irqaction timer_action = {
 	.handler = timer_interrupt,
 	.name = "timer",
+	.flags = SA_INTERRUPT,
 };
 
 #ifdef CONFIG_SMP
 static struct irqaction ipi_action = {
 	.handler = ipi_interrupt,
 	.name = "IPI",
+	.flags = SA_INTERRUPT,
 };
 #endif
 
diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S
index 77e03bc0f935..9534ee17b9be 100644
--- a/arch/parisc/kernel/pacache.S
+++ b/arch/parisc/kernel/pacache.S
@@ -26,7 +26,7 @@
  *       can be used.
  */
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 #define ADDIB	addib,*
 #define CMPB	cmpb,*
 #define ANDCM	andcm,*
@@ -40,8 +40,10 @@
 	.level	2.0
 #endif
 
-#include <asm/assembly.h>
+#include <linux/config.h>
+
 #include <asm/psw.h>
+#include <asm/assembly.h>
 #include <asm/pgtable.h>
 #include <asm/cache.h>
 
@@ -62,32 +64,23 @@ flush_tlb_all_local:
 	 * to happen in real mode with all interruptions disabled.
 	 */
 
-	/*
-	 * Once again, we do the rfi dance ... some day we need examine
-	 * all of our uses of this type of code and see what can be
-	 * consolidated.
-	 */
-
-	rsm		PSW_SM_I, %r19		/* relied upon translation! PA 2.0 Arch. F-5 */
+	/* pcxt_ssm_bug	- relied upon translation! PA 2.0 Arch. F-4 and F-5 */
+	rsm	PSW_SM_I, %r19		/* save I-bit state */
+	load32		PA(1f), %r1
 	nop
 	nop
 	nop
 	nop
 	nop
-	nop
-	nop
-	
-	rsm		PSW_SM_Q, %r0		/* Turn off Q bit to load iia queue */
-	ldil		L%REAL_MODE_PSW, %r1
-	ldo		R%REAL_MODE_PSW(%r1), %r1
-	mtctl		%r1, %cr22
+
+	rsm		PSW_SM_Q, %r0		/* prep to load iia queue */
 	mtctl		%r0, %cr17		/* Clear IIASQ tail */
 	mtctl		%r0, %cr17		/* Clear IIASQ head */
-	ldil		L%PA(1f), %r1
-	ldo		R%PA(1f)(%r1), %r1
 	mtctl		%r1, %cr18		/* IIAOQ head */
 	ldo		4(%r1), %r1
 	mtctl		%r1, %cr18		/* IIAOQ tail */
+	load32		REAL_MODE_PSW, %r1
+	mtctl           %r1, %ipsw
 	rfi
 	nop
 
@@ -178,29 +171,36 @@ fdtonemiddle:					/* Loop if LOOP = 1 */
 	ADDIB>		-1, %r22, fdtoneloop	/* Outer loop count decr */
 	add		%r21, %r20, %r20	/* increment space */
 
-fdtdone:
 
-	/* Switch back to virtual mode */
+fdtdone:
+	/*
+	 * Switch back to virtual mode
+	 */
+	/* pcxt_ssm_bug */
+	rsm		PSW_SM_I, %r0
+	load32		2f, %r1
+	nop
+	nop
+	nop
+	nop
+	nop
 
-	rsm		PSW_SM_Q, %r0		/* clear Q bit to load iia queue */
-	ldil		L%KERNEL_PSW, %r1
-	ldo		R%KERNEL_PSW(%r1), %r1
-	or		%r1, %r19, %r1		/* Set I bit if set on entry */
-	mtctl		%r1, %cr22
+	rsm		PSW_SM_Q, %r0		/* prep to load iia queue */
 	mtctl		%r0, %cr17		/* Clear IIASQ tail */
 	mtctl		%r0, %cr17		/* Clear IIASQ head */
-	ldil		L%(2f), %r1
-	ldo		R%(2f)(%r1), %r1
 	mtctl		%r1, %cr18		/* IIAOQ head */
 	ldo		4(%r1), %r1
 	mtctl		%r1, %cr18		/* IIAOQ tail */
+	load32		KERNEL_PSW, %r1
+	or		%r1, %r19, %r1	/* I-bit to state on entry */
+	mtctl		%r1, %ipsw	/* restore I-bit (entire PSW) */
 	rfi
 	nop
 
 2:      bv		%r0(%r2)
 	nop
-	.exit
 
+	.exit
 	.procend
 
 	.export flush_instruction_cache_local,code
@@ -227,7 +227,7 @@ flush_instruction_cache_local:
 
 fimanyloop:					/* Loop if LOOP >= 2 */
 	ADDIB>		-1, %r31, fimanyloop	/* Adjusted inner loop decr */
-	fice            0(%sr1, %arg0)
+	fice            %r0(%sr1, %arg0)
 	fice,m		%arg1(%sr1, %arg0)	/* Last fice and addr adjust */
 	movb,tr		%arg3, %r31, fimanyloop	/* Re-init inner loop count */
 	ADDIB<=,n	-1, %arg2, fisync	/* Outer loop decr */
@@ -238,7 +238,7 @@ fioneloop:					/* Loop if LOOP = 1 */
 
 fisync:
 	sync
-	mtsm		%r22
+	mtsm		%r22			/* restore I-bit */
 	bv		%r0(%r2)
 	nop
 	.exit
@@ -269,7 +269,7 @@ flush_data_cache_local:
 
 fdmanyloop:					/* Loop if LOOP >= 2 */
 	ADDIB>		-1, %r31, fdmanyloop	/* Adjusted inner loop decr */
-	fdce		0(%sr1, %arg0)
+	fdce		%r0(%sr1, %arg0)
 	fdce,m		%arg1(%sr1, %arg0)	/* Last fdce and addr adjust */
 	movb,tr		%arg3, %r31, fdmanyloop	/* Re-init inner loop count */
 	ADDIB<=,n	-1, %arg2, fdsync	/* Outer loop decr */
@@ -281,7 +281,7 @@ fdoneloop:					/* Loop if LOOP = 1 */
 fdsync:
 	syncdma
 	sync
-	mtsm		%r22
+	mtsm		%r22			/* restore I-bit */
 	bv		%r0(%r2)
 	nop
 	.exit
@@ -296,7 +296,7 @@ copy_user_page_asm:
 	.callinfo NO_CALLS
 	.entry
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* PA8x00 CPUs can consume 2 loads or 1 store per cycle.
 	 * Unroll the loop by hand and arrange insn appropriately.
 	 * GCC probably can do this just as well.
@@ -351,7 +351,11 @@ copy_user_page_asm:
 	std		%r22, 120(%r26)
 	ldo		128(%r26), %r26
 
-	ADDIB>		-1, %r1, 1b		/* bundle 10 */
+	/* conditional branches nullify on forward taken branch, and on
+	 * non-taken backward branch. Note that .+4 is a backwards branch.
+	 * The ldd should only get executed if the branch is taken.
+	 */
+	ADDIB>,n	-1, %r1, 1b		/* bundle 10 */
 	ldd		0(%r25), %r19		/* start next loads */
 
 #else
@@ -363,10 +367,10 @@ copy_user_page_asm:
 	 * the full 64 bit register values on interrupt, we can't
 	 * use ldd/std on a 32 bit kernel.
 	 */
+	ldw		0(%r25), %r19
 	ldi		64, %r1		/* PAGE_SIZE/64 == 64 */
 
 1:
-	ldw		0(%r25), %r19
 	ldw		4(%r25), %r20
 	ldw		8(%r25), %r21
 	ldw		12(%r25), %r22
@@ -396,11 +400,12 @@ copy_user_page_asm:
 	ldw		60(%r25), %r22
 	stw		%r19, 48(%r26)
 	stw		%r20, 52(%r26)
+	ldo		64(%r25), %r25
 	stw		%r21, 56(%r26)
 	stw		%r22, 60(%r26)
 	ldo		64(%r26), %r26
-	ADDIB>		-1, %r1, 1b
-	ldo		64(%r25), %r25
+	ADDIB>,n	-1, %r1, 1b
+	ldw		0(%r25), %r19
 #endif
 	bv		%r0(%r2)
 	nop
@@ -456,7 +461,7 @@ copy_user_page_asm:
 	sub		%r25, %r1, %r23		/* move physical addr into non shadowed reg */
 
 	ldil		L%(TMPALIAS_MAP_START), %r28
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	extrd,u		%r26,56,32, %r26		/* convert phys addr to tlb insert format */
 	extrd,u		%r23,56,32, %r23		/* convert phys addr to tlb insert format */
 	depd		%r24,63,22, %r28		/* Form aliased virtual address 'to' */
@@ -543,7 +548,7 @@ __clear_user_page_asm:
 	tophys_r1	%r26
 
 	ldil		L%(TMPALIAS_MAP_START), %r28
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 #if (TMPALIAS_MAP_START >= 0x80000000)
 	depdi		0, 31,32, %r28		/* clear any sign extension */
 #endif
@@ -560,7 +565,7 @@ __clear_user_page_asm:
 
 	pdtlb		0(%r28)
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldi		32, %r1			/* PAGE_SIZE/128 == 32 */
 
 	/* PREFETCH (Write) has not (yet) been proven to help here */
@@ -585,7 +590,7 @@ __clear_user_page_asm:
 	ADDIB>		-1, %r1, 1b
 	ldo		128(%r28), %r28
 
-#else	/* ! __LP64 */
+#else	/* ! CONFIG_64BIT */
 
 	ldi		64, %r1			/* PAGE_SIZE/64 == 64 */
 
@@ -608,7 +613,7 @@ __clear_user_page_asm:
 	stw		%r0, 60(%r28)
 	ADDIB>		-1, %r1, 1b
 	ldo		64(%r28), %r28
-#endif	/* __LP64 */
+#endif	/* CONFIG_64BIT */
 
 	bv		%r0(%r2)
 	nop
@@ -626,7 +631,7 @@ flush_kernel_dcache_page:
 	ldil		L%dcache_stride, %r1
 	ldw		R%dcache_stride(%r1), %r23
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	depdi,z		1, 63-PAGE_SHIFT,1, %r25
 #else
 	depwi,z		1, 31-PAGE_SHIFT,1, %r25
@@ -670,7 +675,7 @@ flush_user_dcache_page:
 	ldil		L%dcache_stride, %r1
 	ldw		R%dcache_stride(%r1), %r23
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	depdi,z		1,63-PAGE_SHIFT,1, %r25
 #else
 	depwi,z		1,31-PAGE_SHIFT,1, %r25
@@ -714,7 +719,7 @@ flush_user_icache_page:
 	ldil		L%dcache_stride, %r1
 	ldw		R%dcache_stride(%r1), %r23
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	depdi,z		1, 63-PAGE_SHIFT,1, %r25
 #else
 	depwi,z		1, 31-PAGE_SHIFT,1, %r25
@@ -759,7 +764,7 @@ purge_kernel_dcache_page:
 	ldil		L%dcache_stride, %r1
 	ldw		R%dcache_stride(%r1), %r23
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	depdi,z		1, 63-PAGE_SHIFT,1, %r25
 #else
 	depwi,z		1, 31-PAGE_SHIFT,1, %r25
@@ -807,7 +812,7 @@ flush_alias_page:
 	tophys_r1		%r26
 
 	ldil		L%(TMPALIAS_MAP_START), %r28
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	extrd,u		%r26, 56,32, %r26	/* convert phys addr to tlb insert format */
 	depd		%r25, 63,22, %r28	/* Form aliased virtual address 'to' */
 	depdi		0, 63,12, %r28		/* Clear any offset bits */
@@ -824,7 +829,7 @@ flush_alias_page:
 	ldil		L%dcache_stride, %r1
 	ldw		R%dcache_stride(%r1), %r23
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	depdi,z		1, 63-PAGE_SHIFT,1, %r29
 #else
 	depwi,z		1, 31-PAGE_SHIFT,1, %r29
@@ -935,7 +940,7 @@ flush_kernel_icache_page:
 	ldil		L%icache_stride, %r1
 	ldw		R%icache_stride(%r1), %r23
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	depdi,z		1, 63-PAGE_SHIFT,1, %r25
 #else
 	depwi,z		1, 31-PAGE_SHIFT,1, %r25
@@ -944,23 +949,23 @@ flush_kernel_icache_page:
 	sub		%r25, %r23, %r25
 
 
-1:      fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
+1:      fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
 	CMPB<<		%r26, %r25, 1b
-	fic,m		%r23(%r26)
+	fic,m		%r23(%sr4, %r26)
 
 	sync
 	bv		%r0(%r2)
@@ -982,17 +987,18 @@ flush_kernel_icache_range_asm:
 	ANDCM		%r26, %r21, %r26
 
 1:      CMPB<<,n	%r26, %r25, 1b
-	fic,m		%r23(%r26)
+	fic,m		%r23(%sr4, %r26)
 
 	sync
 	bv		%r0(%r2)
 	nop
 	.exit
-
 	.procend
 
-	.align	128
-
+	/* align should cover use of rfi in disable_sr_hashing_asm and
+	 * srdis_done.
+	 */
+	.align	256
 	.export disable_sr_hashing_asm,code
 
 disable_sr_hashing_asm:
@@ -1000,28 +1006,26 @@ disable_sr_hashing_asm:
 	.callinfo NO_CALLS
 	.entry
 
-	/* Switch to real mode */
-
-	ssm		0, %r0			/* relied upon translation! */
-	nop
-	nop
+	/*
+	 * Switch to real mode
+	 */
+	/* pcxt_ssm_bug */
+	rsm		PSW_SM_I, %r0
+	load32		PA(1f), %r1
 	nop
 	nop
 	nop
 	nop
 	nop
-	
-	rsm		(PSW_SM_Q|PSW_SM_I), %r0 /* disable Q&I to load the iia queue */
-	ldil		L%REAL_MODE_PSW, %r1
-	ldo		R%REAL_MODE_PSW(%r1), %r1
-	mtctl		%r1, %cr22
+
+	rsm		PSW_SM_Q, %r0		/* prep to load iia queue */
 	mtctl		%r0, %cr17		/* Clear IIASQ tail */
 	mtctl		%r0, %cr17		/* Clear IIASQ head */
-	ldil		L%PA(1f), %r1
-	ldo		R%PA(1f)(%r1), %r1
 	mtctl		%r1, %cr18		/* IIAOQ head */
 	ldo		4(%r1), %r1
 	mtctl		%r1, %cr18		/* IIAOQ tail */
+	load32		REAL_MODE_PSW, %r1
+	mtctl		%r1, %ipsw
 	rfi
 	nop
 
@@ -1053,27 +1057,31 @@ srdis_pcxl:
 
 srdis_pa20:
 
-	/* Disable Space Register Hashing for PCXU,PCXU+,PCXW,PCXW+ */
+	/* Disable Space Register Hashing for PCXU,PCXU+,PCXW,PCXW+,PCXW2 */
 
 	.word		0x144008bc		/* mfdiag %dr2, %r28 */
 	depdi		0, 54,1, %r28		/* clear DIAG_SPHASH_ENAB (bit 54) */
 	.word		0x145c1840		/* mtdiag %r28, %dr2 */
 
-srdis_done:
 
+srdis_done:
 	/* Switch back to virtual mode */
+	rsm		PSW_SM_I, %r0		/* prep to load iia queue */
+	load32 	   	2f, %r1
+	nop
+	nop
+	nop
+	nop
+	nop
 
-	rsm		PSW_SM_Q, %r0		/* clear Q bit to load iia queue */
-	ldil		L%KERNEL_PSW, %r1
-	ldo		R%KERNEL_PSW(%r1), %r1
-	mtctl		%r1, %cr22
+	rsm		PSW_SM_Q, %r0		/* prep to load iia queue */
 	mtctl		%r0, %cr17		/* Clear IIASQ tail */
 	mtctl		%r0, %cr17		/* Clear IIASQ head */
-	ldil 	   	L%(2f), %r1
-	ldo     	R%(2f)(%r1), %r1
 	mtctl		%r1, %cr18		/* IIAOQ head */
 	ldo		4(%r1), %r1
 	mtctl		%r1, %cr18		/* IIAOQ tail */
+	load32		KERNEL_PSW, %r1
+	mtctl		%r1, %ipsw
 	rfi
 	nop
 
diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c
index 368cc095c99f..f94a02ef3d95 100644
--- a/arch/parisc/kernel/pci-dma.c
+++ b/arch/parisc/kernel/pci-dma.c
@@ -31,7 +31,7 @@
 #include <asm/page.h>	/* get_order */
 #include <asm/pgalloc.h>
 #include <asm/uaccess.h>
-
+#include <asm/tlbflush.h>	/* for purge_tlb_*() macros */
 
 static struct proc_dir_entry * proc_gsc_root = NULL;
 static int pcxl_proc_info(char *buffer, char **start, off_t offset, int length);
@@ -114,7 +114,7 @@ static inline int map_pmd_uncached(pmd_t * pmd, unsigned long vaddr,
 	if (end > PGDIR_SIZE)
 		end = PGDIR_SIZE;
 	do {
-		pte_t * pte = pte_alloc_kernel(&init_mm, pmd, vaddr);
+		pte_t * pte = pte_alloc_kernel(pmd, vaddr);
 		if (!pte)
 			return -ENOMEM;
 		if (map_pte_uncached(pte, orig_vaddr, end - vaddr, paddr_ptr))
@@ -333,23 +333,33 @@ pcxl_free_range(unsigned long vaddr, size_t size)
 static int __init
 pcxl_dma_init(void)
 {
-    if (pcxl_dma_start == 0)
-	return 0;
+	if (pcxl_dma_start == 0)
+		return 0;
 
-    spin_lock_init(&pcxl_res_lock);
-    pcxl_res_size = PCXL_DMA_MAP_SIZE >> (PAGE_SHIFT + 3);
-    pcxl_res_hint = 0;
-    pcxl_res_map = (char *)__get_free_pages(GFP_KERNEL,
+	spin_lock_init(&pcxl_res_lock);
+	pcxl_res_size = PCXL_DMA_MAP_SIZE >> (PAGE_SHIFT + 3);
+	pcxl_res_hint = 0;
+	pcxl_res_map = (char *)__get_free_pages(GFP_KERNEL,
 					    get_order(pcxl_res_size));
-    memset(pcxl_res_map, 0, pcxl_res_size);
-    proc_gsc_root = proc_mkdir("gsc", 0);
-    create_proc_info_entry("dino", 0, proc_gsc_root, pcxl_proc_info);
-    return 0;
+	memset(pcxl_res_map, 0, pcxl_res_size);
+	proc_gsc_root = proc_mkdir("gsc", 0);
+	if (!proc_gsc_root)
+    		printk(KERN_WARNING
+			"pcxl_dma_init: Unable to create gsc /proc dir entry\n");
+	else {
+		struct proc_dir_entry* ent;
+		ent = create_proc_info_entry("pcxl_dma", 0,
+				proc_gsc_root, pcxl_proc_info);
+		if (!ent)
+			printk(KERN_WARNING
+				"pci-dma.c: Unable to create pcxl_dma /proc entry.\n");
+	}
+	return 0;
 }
 
 __initcall(pcxl_dma_init);
 
-static void * pa11_dma_alloc_consistent (struct device *dev, size_t size, dma_addr_t *dma_handle, int flag)
+static void * pa11_dma_alloc_consistent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flag)
 {
 	unsigned long vaddr;
 	unsigned long paddr;
@@ -502,13 +512,13 @@ struct hppa_dma_ops pcxl_dma_ops = {
 };
 
 static void *fail_alloc_consistent(struct device *dev, size_t size,
-				   dma_addr_t *dma_handle, int flag)
+				   dma_addr_t *dma_handle, gfp_t flag)
 {
 	return NULL;
 }
 
 static void *pa11_dma_alloc_noncoherent(struct device *dev, size_t size,
-					  dma_addr_t *dma_handle, int flag)
+					  dma_addr_t *dma_handle, gfp_t flag)
 {
 	void *addr = NULL;
 
@@ -545,16 +555,16 @@ struct hppa_dma_ops pcx_dma_ops = {
 
 static int pcxl_proc_info(char *buf, char **start, off_t offset, int len)
 {
+#if 0
 	u_long i = 0;
 	unsigned long *res_ptr = (u_long *)pcxl_res_map;
-	unsigned long total_pages = pcxl_res_size << 3;        /* 8 bits per byte */
+#endif
+	unsigned long total_pages = pcxl_res_size << 3;   /* 8 bits per byte */
 
-	sprintf(buf, "\nDMA Mapping Area size    : %d bytes (%d pages)\n",
-		PCXL_DMA_MAP_SIZE,
-		(pcxl_res_size << 3) ); /* 1 bit per page */
+	sprintf(buf, "\nDMA Mapping Area size    : %d bytes (%ld pages)\n",
+		PCXL_DMA_MAP_SIZE, total_pages);
 	
-	sprintf(buf, "%sResource bitmap : %d bytes (%d pages)\n", 
-		buf, pcxl_res_size, pcxl_res_size << 3);   /* 8 bits per byte */
+	sprintf(buf, "%sResource bitmap : %d bytes\n", buf, pcxl_res_size);
 
 	strcat(buf,  "     	  total:    free:    used:   % used:\n");
 	sprintf(buf, "%sblocks  %8d %8ld %8ld %8ld%%\n", buf, pcxl_res_size,
@@ -564,7 +574,8 @@ static int pcxl_proc_info(char *buf, char **start, off_t offset, int len)
 	sprintf(buf, "%spages   %8ld %8ld %8ld %8ld%%\n", buf, total_pages,
 		total_pages - pcxl_used_pages, pcxl_used_pages,
 		(pcxl_used_pages * 100 / total_pages));
-	
+
+#if 0
 	strcat(buf, "\nResource bitmap:");
 
 	for(; i < (pcxl_res_size / sizeof(u_long)); ++i, ++res_ptr) {
@@ -572,6 +583,7 @@ static int pcxl_proc_info(char *buf, char **start, off_t offset, int len)
 		    strcat(buf,"\n   ");
 		sprintf(buf, "%s %08lx", buf, *res_ptr);
 	}
+#endif
 	strcat(buf, "\n");
 	return strlen(buf);
 }
diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c
index e6a891a0cad0..88cba49c5301 100644
--- a/arch/parisc/kernel/pci.c
+++ b/arch/parisc/kernel/pci.c
@@ -202,7 +202,8 @@ static void
 pcibios_link_hba_resources( struct resource *hba_res, struct resource *r)
 {
 	if (!r->parent) {
-		printk(KERN_EMERG "PCI: Tell willy he's wrong\n");
+		printk(KERN_EMERG "PCI: resource not parented! [%lx-%lx]\n",
+				r->start, r->end);
 		r->parent = hba_res;
 
 		/* reverse link is harder *sigh*  */
diff --git a/arch/parisc/kernel/pdc_cons.c b/arch/parisc/kernel/pdc_cons.c
index 01f676d1673b..215d78c87bc5 100644
--- a/arch/parisc/kernel/pdc_cons.c
+++ b/arch/parisc/kernel/pdc_cons.c
@@ -41,7 +41,7 @@
 
 /* Define EARLY_BOOTUP_DEBUG to debug kernel related boot problems. 
  * On production kernels EARLY_BOOTUP_DEBUG should be undefined. */
-#undef EARLY_BOOTUP_DEBUG
+#define EARLY_BOOTUP_DEBUG
 
 
 #include <linux/config.h>
@@ -49,14 +49,8 @@
 #include <linux/console.h>
 #include <linux/string.h>
 #include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
 #include <linux/major.h>
 #include <linux/tty.h>
-#include <asm/page.h>
-#include <asm/types.h>
-#include <asm/system.h>
 #include <asm/pdc.h>		/* for iodc_call() proto and friends */
 
 
@@ -96,7 +90,6 @@ static int pdc_console_setup(struct console *co, char *options)
 }
 
 #if defined(CONFIG_PDC_CONSOLE)
-#define PDC_CONSOLE_DEVICE pdc_console_device
 static struct tty_driver * pdc_console_device (struct console *c, int *index)
 {
 	extern struct tty_driver console_driver;
@@ -104,22 +97,19 @@ static struct tty_driver * pdc_console_device (struct console *c, int *index)
 	return &console_driver;
 }
 #else
-#define PDC_CONSOLE_DEVICE NULL
+#define pdc_console_device NULL
 #endif
 
 static struct console pdc_cons = {
 	.name =		"ttyB",
 	.write =	pdc_console_write,
-	.device =	PDC_CONSOLE_DEVICE,
+	.device =	pdc_console_device,
 	.setup =	pdc_console_setup,
-	.flags =	CON_BOOT|CON_PRINTBUFFER|CON_ENABLED,
+	.flags =	CON_BOOT | CON_PRINTBUFFER | CON_ENABLED,
 	.index =	-1,
 };
 
 static int pdc_console_initialized;
-extern unsigned long con_start;	/* kernel/printk.c */
-extern unsigned long log_end;	/* kernel/printk.c */
-
 
 static void pdc_console_init_force(void)
 {
@@ -146,27 +136,11 @@ void __init pdc_console_init(void)
 }
 
 
-/* Unregister the pdc console with the printk console layer */
-void pdc_console_die(void)
-{
-	if (!pdc_console_initialized)
-		return;
-	--pdc_console_initialized;
-
-	printk(KERN_INFO "Switching from PDC console\n");
-
-	/* Don't repeat what we've already printed */
-	con_start = log_end;
-
-	unregister_console(&pdc_cons);
-}
-
-
 /*
  * Used for emergencies. Currently only used if an HPMC occurs. If an
  * HPMC occurs, it is possible that the current console may not be
- * properly initialed after the PDC IO reset. This routine unregisters all
- * of the current consoles, reinitializes the pdc console and
+ * properly initialised after the PDC IO reset. This routine unregisters
+ * all of the current consoles, reinitializes the pdc console and
  * registers it.
  */
 
@@ -177,13 +151,13 @@ void pdc_console_restart(void)
 	if (pdc_console_initialized)
 		return;
 
+	/* If we've already seen the output, don't bother to print it again */
+	if (console_drivers != NULL)
+		pdc_cons.flags &= ~CON_PRINTBUFFER;
+
 	while ((console = console_drivers) != NULL)
 		unregister_console(console_drivers);
 
-	/* Don't repeat what we've already printed */
-	con_start = log_end;
-	
 	/* force registering the pdc console */
 	pdc_console_init_force();
 }
-
diff --git a/arch/parisc/kernel/perf.c b/arch/parisc/kernel/perf.c
index b3ad0a505b87..f6fec62b6a2f 100644
--- a/arch/parisc/kernel/perf.c
+++ b/arch/parisc/kernel/perf.c
@@ -196,8 +196,7 @@ static int perf_open(struct inode *inode, struct file *file);
 static ssize_t perf_read(struct file *file, char __user *buf, size_t cnt, loff_t *ppos);
 static ssize_t perf_write(struct file *file, const char __user *buf, size_t count, 
 	loff_t *ppos);
-static int perf_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	unsigned long arg);
+static long perf_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
 static void perf_start_counters(void);
 static int perf_stop_counters(uint32_t *raddr);
 static struct rdr_tbl_ent * perf_rdr_get_entry(uint32_t rdr_num);
@@ -438,48 +437,56 @@ static void perf_patch_images(void)
  * must be running on the processor that you wish to change.
  */
 
-static int perf_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	unsigned long arg)
+static long perf_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	long error_start;
-	uint32_t raddr[4];	
+	uint32_t raddr[4];
+	int error = 0;
 
+	lock_kernel();
 	switch (cmd) {
 
 	    case PA_PERF_ON:
 			/* Start the counters */
 			perf_start_counters();
-			return 0;
+			break;
 
 	    case PA_PERF_OFF:
 			error_start = perf_stop_counters(raddr);
 			if (error_start != 0) {
 				printk(KERN_ERR "perf_off: perf_stop_counters = %ld\n", error_start);
-				return -EFAULT;	
+				error = -EFAULT;
+				break;
 			}
 
 			/* copy out the Counters */
 			if (copy_to_user((void __user *)arg, raddr, 
 					sizeof (raddr)) != 0) {
-				return -EFAULT;
+				error =  -EFAULT;
+				break;
 			}
-			return 0;
+			break;
 
 	    case PA_PERF_VERSION:
   	  		/* Return the version # */
-			return put_user(PERF_VERSION, (int *)arg);
+			error = put_user(PERF_VERSION, (int *)arg);
+			break;
 
 	    default:
-  	 		break;
+  	 		error = -ENOTTY;
 	}
-	return -ENOTTY;
+
+	unlock_kernel();
+
+	return error;
 }
 
 static struct file_operations perf_fops = {
 	.llseek = no_llseek,
 	.read = perf_read,
 	.write = perf_write,
-	.ioctl = perf_ioctl,
+	.unlocked_ioctl = perf_ioctl,
+	.compat_ioctl = perf_ioctl,
 	.open = perf_open,
 	.release = perf_release
 };
@@ -746,7 +753,8 @@ static int perf_write_image(uint64_t *memaddr)
 	uint64_t *bptr;
 	uint32_t dwords;
 	uint32_t *intrigue_rdr;
-	uint64_t *intrigue_bitmask, tmp64, proc_hpa;
+	uint64_t *intrigue_bitmask, tmp64;
+	void __iomem *runway;
 	struct rdr_tbl_ent *tentry;
 	int i;
 
@@ -798,15 +806,16 @@ static int perf_write_image(uint64_t *memaddr)
 		return -1;
 	}
 
-	proc_hpa = cpu_device->hpa;
+	runway = ioremap(cpu_device->hpa.start, 4096);
 
 	/* Merge intrigue bits into Runway STATUS 0 */
-	tmp64 = __raw_readq(proc_hpa + RUNWAY_STATUS) & 0xffecfffffffffffful;
-	__raw_writeq(tmp64 | (*memaddr++ & 0x0013000000000000ul), proc_hpa + RUNWAY_STATUS);
+	tmp64 = __raw_readq(runway + RUNWAY_STATUS) & 0xffecfffffffffffful;
+	__raw_writeq(tmp64 | (*memaddr++ & 0x0013000000000000ul), 
+		     runway + RUNWAY_STATUS);
 	
 	/* Write RUNWAY DEBUG registers */
 	for (i = 0; i < 8; i++) {
-		__raw_writeq(*memaddr++, proc_hpa + RUNWAY_DEBUG + i);
+		__raw_writeq(*memaddr++, runway + RUNWAY_DEBUG);
 	}
 
 	return 0; 
diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c
index 46b759385115..fee4f1f09adc 100644
--- a/arch/parisc/kernel/process.c
+++ b/arch/parisc/kernel/process.c
@@ -9,7 +9,7 @@
  *    Copyright (C) 2000-2003 Paul Bame <bame at parisc-linux.org>
  *    Copyright (C) 2000 Philipp Rumpf <prumpf with tux.org>
  *    Copyright (C) 2000 David Kennedy <dkennedy with linuxcare.com>
- *    Copyright (C) 2000 Richard Hirst <rhirst with parisc-lixux.org>
+ *    Copyright (C) 2000 Richard Hirst <rhirst with parisc-linux.org>
  *    Copyright (C) 2000 Grant Grundler <grundler with parisc-linux.org>
  *    Copyright (C) 2001 Alan Modra <amodra at parisc-linux.org>
  *    Copyright (C) 2001-2002 Ryan Bradetich <rbrad at parisc-linux.org>
@@ -88,11 +88,15 @@ void default_idle(void)
  */
 void cpu_idle(void)
 {
+	set_thread_flag(TIF_POLLING_NRFLAG);
+
 	/* endless idle loop with no priority at all */
 	while (1) {
 		while (!need_resched())
 			barrier();
+		preempt_enable_no_resched();
 		schedule();
+		preempt_disable();
 		check_pgt_cache();
 	}
 }
@@ -245,7 +249,17 @@ int
 sys_clone(unsigned long clone_flags, unsigned long usp,
 	  struct pt_regs *regs)
 {
-	int __user *user_tid = (int __user *)regs->gr[26];
+  	/* Arugments from userspace are:
+	   r26 = Clone flags.
+	   r25 = Child stack.
+	   r24 = parent_tidptr.
+	   r23 = Is the TLS storage descriptor 
+	   r22 = child_tidptr 
+	   
+	   However, these last 3 args are only examined
+	   if the proper flags are set. */
+	int __user *child_tidptr;
+	int __user *parent_tidptr;
 
 	/* usp must be word aligned.  This also prevents users from
 	 * passing in the value 1 (which is the signal for a special
@@ -253,10 +267,20 @@ sys_clone(unsigned long clone_flags, unsigned long usp,
 	usp = ALIGN(usp, 4);
 
 	/* A zero value for usp means use the current stack */
-	if(usp == 0)
-		usp = regs->gr[30];
+	if (usp == 0)
+	  usp = regs->gr[30];
+
+	if (clone_flags & CLONE_PARENT_SETTID)
+	  parent_tidptr = (int __user *)regs->gr[24];
+	else
+	  parent_tidptr = NULL;
+	
+	if (clone_flags & (CLONE_CHILD_SETTID | CLONE_CHILD_CLEARTID))
+	  child_tidptr = (int __user *)regs->gr[22];
+	else
+	  child_tidptr = NULL;
 
-	return do_fork(clone_flags, usp, regs, 0, user_tid, NULL);
+	return do_fork(clone_flags, usp, regs, 0, parent_tidptr, child_tidptr);
 }
 
 int
@@ -332,6 +356,10 @@ copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
 		} else {
 			cregs->kpc = (unsigned long) &child_return;
 		}
+		/* Setup thread TLS area from the 4th parameter in clone */
+		if (clone_flags & CLONE_SETTLS)
+		  cregs->cr27 = pregs->gr[23];
+	
 	}
 
 	return 0;
diff --git a/arch/parisc/kernel/processor.c b/arch/parisc/kernel/processor.c
index 13b721cb9f55..4f5bbcf1f5a4 100644
--- a/arch/parisc/kernel/processor.c
+++ b/arch/parisc/kernel/processor.c
@@ -92,7 +92,7 @@ static int __init processor_probe(struct parisc_device *dev)
 	 * May get overwritten by PAT code.
 	 */
 	cpuid = boot_cpu_data.cpu_count;
-	txn_addr = dev->hpa;	/* for legacy PDC */
+	txn_addr = dev->hpa.start;	/* for legacy PDC */
 
 #ifdef __LP64__
 	if (is_pdc_pat()) {
@@ -122,7 +122,7 @@ static int __init processor_probe(struct parisc_device *dev)
  * boot time (ie shutdown a CPU from an OS perspective).
  */
 		/* get the cpu number */
-		status = pdc_pat_cpu_get_number(&cpu_info, dev->hpa);
+		status = pdc_pat_cpu_get_number(&cpu_info, dev->hpa.start);
 
 		BUG_ON(PDC_OK != status);
 
@@ -130,7 +130,7 @@ static int __init processor_probe(struct parisc_device *dev)
 			printk(KERN_WARNING "IGNORING CPU at 0x%x,"
 				" cpu_slot_id > NR_CPUS"
 				" (%ld > %d)\n",
-				dev->hpa, cpu_info.cpu_num, NR_CPUS);
+				dev->hpa.start, cpu_info.cpu_num, NR_CPUS);
 			/* Ignore CPU since it will only crash */
 			boot_cpu_data.cpu_count--;
 			return 1;
@@ -149,7 +149,7 @@ static int __init processor_probe(struct parisc_device *dev)
 
 	p->loops_per_jiffy = loops_per_jiffy;
 	p->dev = dev;		/* Save IODC data in case we need it */
-	p->hpa = dev->hpa;	/* save CPU hpa */
+	p->hpa = dev->hpa.start;	/* save CPU hpa */
 	p->cpuid = cpuid;	/* save CPU id */
 	p->txn_addr = txn_addr;	/* save CPU IRQ address */
 #ifdef CONFIG_SMP
diff --git a/arch/parisc/kernel/ptrace.c b/arch/parisc/kernel/ptrace.c
index f3428e5e86fb..27160e8bf15b 100644
--- a/arch/parisc/kernel/ptrace.c
+++ b/arch/parisc/kernel/ptrace.c
@@ -78,52 +78,13 @@ void ptrace_disable(struct task_struct *child)
 	pa_psw(child)->l = 0;
 }
 
-long sys_ptrace(long request, pid_t pid, long addr, long data)
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
-	struct task_struct *child;
 	long ret;
 #ifdef DEBUG_PTRACE
 	long oaddr=addr, odata=data;
 #endif
 
-	lock_kernel();
-	ret = -EPERM;
-	if (request == PTRACE_TRACEME) {
-		/* are we already being traced? */
-		if (current->ptrace & PT_PTRACED)
-			goto out;
-
-		ret = security_ptrace(current->parent, current);
-		if (ret) 
-			goto out;
-
-		/* set the ptrace bit in the process flags. */
-		current->ptrace |= PT_PTRACED;
-		ret = 0;
-		goto out;
-	}
-
-	ret = -ESRCH;
-	read_lock(&tasklist_lock);
-	child = find_task_by_pid(pid);
-	if (child)
-		get_task_struct(child);
-	read_unlock(&tasklist_lock);
-	if (!child)
-		goto out;
-	ret = -EPERM;
-	if (pid == 1)		/* no messing around with init! */
-		goto out_tsk;
-
-	if (request == PTRACE_ATTACH) {
-		ret = ptrace_attach(child);
-		goto out_tsk;
-	}
-
-	ret = ptrace_check_attach(child, request == PTRACE_KILL);
-	if (ret < 0)
-		goto out_tsk;
-
 	switch (request) {
 	case PTRACE_PEEKTEXT: /* read word at location addr. */ 
 	case PTRACE_PEEKDATA: {
@@ -303,6 +264,7 @@ long sys_ptrace(long request, pid_t pid, long addr, long data)
 		 * sigkill.  perhaps it should be put in the status
 		 * that it wants to exit.
 		 */
+		ret = 0;
 		DBG("sys_ptrace(KILL)\n");
 		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
 			goto out_tsk;
@@ -396,10 +358,7 @@ out_wake:
 	wake_up_process(child);
 	ret = 0;
 out_tsk:
-	put_task_struct(child);
-out:
-	unlock_kernel();
-	DBG("sys_ptrace(%ld, %d, %lx, %lx) returning %ld\n",
+	DBG("arch_ptrace(%ld, %d, %lx, %lx) returning %ld\n",
 		request, pid, oaddr, odata, ret);
 	return ret;
 }
diff --git a/arch/parisc/kernel/real2.S b/arch/parisc/kernel/real2.S
index 8dd5defb7316..8c2859cca77e 100644
--- a/arch/parisc/kernel/real2.S
+++ b/arch/parisc/kernel/real2.S
@@ -7,8 +7,10 @@
  * Copyright (C) 2000 Hewlett Packard (Paul Bame bame@puffin.external.hp.com)
  *
  */
-#include <asm/assembly.h>
+#include <linux/config.h>
+
 #include <asm/psw.h>
+#include <asm/assembly.h>
 
 	.section	.bss
 	.export real_stack
@@ -20,7 +22,7 @@ real32_stack:
 real64_stack:
 	.block	8192
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 #  define REG_SZ 8
 #else
 #  define REG_SZ 4
@@ -50,7 +52,7 @@ save_cr_end:
 
 real32_call_asm:
 	STREG	%rp, -RP_OFFSET(%sp)	/* save RP */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	callee_save
 	ldo	2*REG_SZ(%sp), %sp	/* room for a couple more saves */
 	STREG	%r27, -1*REG_SZ(%sp)
@@ -77,7 +79,7 @@ real32_call_asm:
 	b,l	save_control_regs,%r2		/* modifies r1, r2, r28 */
 	nop
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	rsm	PSW_SM_W, %r0		/* go narrow */
 #endif
 
@@ -85,7 +87,7 @@ real32_call_asm:
 	bv	0(%r31)
 	nop
 ric_ret:
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ssm	PSW_SM_W, %r0		/* go wide */
 #endif
 	/* restore CRs before going virtual in case we page fault */
@@ -97,7 +99,7 @@ ric_ret:
 
 	tovirt_r1 %sp
 	LDREG	-REG_SZ(%sp), %sp	/* restore SP */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	LDREG	-1*REG_SZ(%sp), %r27
 	LDREG	-2*REG_SZ(%sp), %r29
 	ldo	-2*REG_SZ(%sp), %sp
@@ -143,24 +145,21 @@ restore_control_regs:
 /* rfi_virt2real() and rfi_real2virt() could perhaps be adapted for
  * more general-purpose use by the several places which need RFIs
  */
-	.align 128
 	.text
+	.align 128
 rfi_virt2real:
 	/* switch to real mode... */
-	ssm		0,0		/* See "relied upon translation" */
-	nop				/* PA 2.0 Arch. F-5 */
-	nop
-	nop
+	rsm		PSW_SM_I,%r0
+	load32		PA(rfi_v2r_1), %r1
 	nop
 	nop
 	nop
 	nop
 	nop
 	
-	rsm             (PSW_SM_Q|PSW_SM_I),%r0  /* disable Q & I bits to load iia queue */
+	rsm             PSW_SM_Q,%r0  /* disable Q & I bits to load iia queue */
 	mtctl		%r0, %cr17	/* Clear IIASQ tail */
 	mtctl		%r0, %cr17	/* Clear IIASQ head */
-	load32		PA(rfi_v2r_1), %r1
 	mtctl		%r1, %cr18	/* IIAOQ head */
 	ldo		4(%r1), %r1
 	mtctl		%r1, %cr18	/* IIAOQ tail */
@@ -184,10 +183,8 @@ rfi_v2r_1:
 	.text
 	.align 128
 rfi_real2virt:
-	ssm		0,0		/* See "relied upon translation" */
-	nop				/* PA 2.0 Arch. F-5 */
-	nop
-	nop
+	rsm		PSW_SM_I,%r0
+	load32		(rfi_r2v_1), %r1
 	nop
 	nop
 	nop
@@ -197,7 +194,6 @@ rfi_real2virt:
 	rsm             PSW_SM_Q,%r0    /* disable Q bit to load iia queue */
 	mtctl		%r0, %cr17	/* Clear IIASQ tail */
 	mtctl		%r0, %cr17	/* Clear IIASQ head */
-	load32		(rfi_r2v_1), %r1
 	mtctl		%r1, %cr18	/* IIAOQ head */
 	ldo		4(%r1), %r1
 	mtctl		%r1, %cr18	/* IIAOQ tail */
@@ -218,7 +214,7 @@ rfi_r2v_1:
 	bv	0(%r2)
 	nop
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 
 /************************ 64-bit real-mode calls ***********************/
 /* This is only usable in wide kernels right now and will probably stay so */
@@ -296,7 +292,7 @@ pc_in_user_space:
 	**	comparing function pointers.
 	*/
 __canonicalize_funcptr_for_compare:
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	bve (%r2)
 #else
 	bv %r0(%r2)
diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c
index 0224651fd8f1..3a25a7bd673e 100644
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -296,7 +296,6 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	struct rt_sigframe __user *frame;
 	unsigned long rp, usp;
 	unsigned long haddr, sigframe_size;
-	struct siginfo si;
 	int err = 0;
 #ifdef __LP64__
 	compat_int_t compat_val;
@@ -490,15 +489,7 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 
 give_sigsegv:
 	DBG(1,"setup_rt_frame: sending SIGSEGV\n");
-	if (sig == SIGSEGV)
-		ka->sa.sa_handler = SIG_DFL;
-	si.si_signo = SIGSEGV;
-	si.si_errno = 0;
-	si.si_code = SI_KERNEL;
-	si.si_pid = current->pid;
-	si.si_uid = current->uid;
-	si.si_addr = frame;
-	force_sig_info(SIGSEGV, &si, current);
+	force_sigsegv(sig, current);
 	return 0;
 }
 
@@ -633,10 +624,14 @@ do_signal(sigset_t *oldset, struct pt_regs *regs, int in_syscall)
 			put_user(0xe0008200, &usp[3]);
 			put_user(0x34140000, &usp[4]);
 
-			/* Stack is 64-byte aligned, and we only 
-			 * need to flush 1 cache line */
-			asm("fdc 0(%%sr3, %0)\n"
-			    "fic 0(%%sr3, %0)\n"
+			/* Stack is 64-byte aligned, and we only need
+			 * to flush 1 cache line.
+			 * Flushing one cacheline is cheap.
+			 * "sync" on bigger (> 4 way) boxes is not.
+			 */
+			asm("fdc %%r0(%%sr3, %0)\n"
+			    "sync\n"
+			    "fic %%r0(%%sr3, %0)\n"
 			    "sync\n"
 			    : : "r"(regs->gr[30]));
 
diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c
index bcc7e83f5142..ce89da0f654d 100644
--- a/arch/parisc/kernel/smp.c
+++ b/arch/parisc/kernel/smp.c
@@ -18,7 +18,7 @@
 */
 #undef ENTRY_SYS_CPUS	/* syscall support for iCOD-like functionality */
 
-#include <linux/autoconf.h>
+#include <linux/config.h>
 
 #include <linux/types.h>
 #include <linux/spinlock.h>
@@ -181,12 +181,19 @@ ipi_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 		while (ops) {
 			unsigned long which = ffz(~ops);
 
+			ops &= ~(1 << which);
+
 			switch (which) {
+			case IPI_NOP:
+#if (kDEBUG>=100)
+				printk(KERN_DEBUG "CPU%d IPI_NOP\n",this_cpu);
+#endif /* kDEBUG */
+				break;
+				
 			case IPI_RESCHEDULE:
 #if (kDEBUG>=100)
 				printk(KERN_DEBUG "CPU%d IPI_RESCHEDULE\n",this_cpu);
 #endif /* kDEBUG */
-				ops &= ~(1 << IPI_RESCHEDULE);
 				/*
 				 * Reschedule callback.  Everything to be
 				 * done is done by the interrupt return path.
@@ -197,7 +204,6 @@ ipi_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 #if (kDEBUG>=100)
 				printk(KERN_DEBUG "CPU%d IPI_CALL_FUNC\n",this_cpu);
 #endif /* kDEBUG */
-				ops &= ~(1 << IPI_CALL_FUNC);
 				{
 					volatile struct smp_call_struct *data;
 					void (*func)(void *info);
@@ -231,7 +237,6 @@ ipi_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 #if (kDEBUG>=100)
 				printk(KERN_DEBUG "CPU%d IPI_CPU_START\n",this_cpu);
 #endif /* kDEBUG */
-				ops &= ~(1 << IPI_CPU_START);
 #ifdef ENTRY_SYS_CPUS
 				p->state = STATE_RUNNING;
 #endif
@@ -241,7 +246,6 @@ ipi_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 #if (kDEBUG>=100)
 				printk(KERN_DEBUG "CPU%d IPI_CPU_STOP\n",this_cpu);
 #endif /* kDEBUG */
-				ops &= ~(1 << IPI_CPU_STOP);
 #ifdef ENTRY_SYS_CPUS
 #else
 				halt_processor();
@@ -252,13 +256,11 @@ ipi_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 #if (kDEBUG>=100)
 				printk(KERN_DEBUG "CPU%d is alive!\n",this_cpu);
 #endif /* kDEBUG */
-				ops &= ~(1 << IPI_CPU_TEST);
 				break;
 
 			default:
 				printk(KERN_CRIT "Unknown IPI num on CPU%d: %lu\n",
 					this_cpu, which);
-				ops &= ~(1 << which);
 				return IRQ_NONE;
 			} /* Switch */
 		} /* while (ops) */
@@ -312,6 +314,12 @@ smp_send_start(void)	{ send_IPI_allbutself(IPI_CPU_START); }
 void 
 smp_send_reschedule(int cpu) { send_IPI_single(cpu, IPI_RESCHEDULE); }
 
+void
+smp_send_all_nop(void)
+{
+	send_IPI_allbutself(IPI_NOP);
+}
+
 
 /**
  * Run a function on all other CPUs.
@@ -338,6 +346,10 @@ smp_call_function (void (*func) (void *info), void *info, int retry, int wait)
 
 	/* Can deadlock when called with interrupts disabled */
 	WARN_ON(irqs_disabled());
+
+	/* can also deadlock if IPIs are disabled */
+	WARN_ON((get_eiem() & (1UL<<(CPU_IRQ_MAX - IPI_IRQ))) == 0);
+
 	
 	data.func = func;
 	data.info = info;
@@ -463,6 +475,7 @@ void __init smp_callin(void)
 #endif
 
 	smp_cpu_init(slave_id);
+	preempt_disable();
 
 #if 0	/* NOT WORKING YET - see entry.S */
 	istack = (void *)__get_free_pages(GFP_KERNEL,ISTACK_ORDER);
diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S
index 8c7a7185cd3b..d66163492890 100644
--- a/arch/parisc/kernel/syscall.S
+++ b/arch/parisc/kernel/syscall.S
@@ -6,6 +6,7 @@
  * thanks to Philipp Rumpf, Mike Shaver and various others
  * sorry about the wall, puffin..
  */
+#include <linux/config.h> /* for CONFIG_SMP */
 
 #include <asm/asm-offsets.h>
 #include <asm/unistd.h>
@@ -22,15 +23,13 @@
 	 */
 #define KILL_INSN	break	0,0
 
-#include <linux/config.h> /* for CONFIG_SMP */
-
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	.level          2.0w
 #else
 	.level		1.1
 #endif
 
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 	.macro fixup_branch,lbl
 	b	    \lbl
 	.endm
@@ -103,7 +102,7 @@ linux_gateway_entry:
 	mfsp    %sr7,%r1                        /* save user sr7 */
 	mtsp    %r1,%sr3                        /* and store it in sr3 */
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* for now we can *always* set the W bit on entry to the syscall
 	 * since we don't support wide userland processes.  We could
 	 * also save the current SM other than in r0 and restore it on
@@ -155,7 +154,7 @@ linux_gateway_entry:
 	STREG	%r19, TASK_PT_GR19(%r1)
 
 	LDREGM	-FRAME_SIZE(%r30), %r2		/* get users sp back */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	extrd,u	%r2,63,1,%r19			/* W hidden in bottom bit */
 #if 0
 	xor	%r19,%r2,%r2			/* clear bottom bit */
@@ -165,7 +164,7 @@ linux_gateway_entry:
 #endif
 	STREG	%r2,  TASK_PT_GR30(%r1)		/* ... and save it */
 	
-	STREG	%r20, TASK_PT_GR20(%r1)
+	STREG	%r20, TASK_PT_GR20(%r1)		/* Syscall number */
 	STREG	%r21, TASK_PT_GR21(%r1)
 	STREG	%r22, TASK_PT_GR22(%r1)
 	STREG	%r23, TASK_PT_GR23(%r1)		/* 4th argument */
@@ -186,7 +185,7 @@ linux_gateway_entry:
 
 	loadgp
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29			/* Reference param save area */
 	copy	%r19,%r2			/* W bit back to r2 */
 #else
@@ -205,7 +204,7 @@ linux_gateway_entry:
 	/* Note!  We cannot use the syscall table that is mapped
 	nearby since the gateway page is mapped execute-only. */
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldil	L%sys_call_table, %r1
 	or,=	%r2,%r2,%r2
 	addil	L%(sys_call_table64-sys_call_table), %r1
@@ -321,7 +320,7 @@ tracesys_next:
 	LDREG   TASK_PT_GR25(%r1), %r25
 	LDREG   TASK_PT_GR24(%r1), %r24
 	LDREG   TASK_PT_GR23(%r1), %r23
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	LDREG   TASK_PT_GR22(%r1), %r22
 	LDREG   TASK_PT_GR21(%r1), %r21
 	ldo	-16(%r30),%r29			/* Reference param save area */
@@ -350,7 +349,7 @@ tracesys_next:
 tracesys_exit:
 	ldo     -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1      /* get task ptr */
 	LDREG	TI_TASK(%r1), %r1
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29			/* Reference param save area */
 #endif
 	bl	syscall_trace, %r2
@@ -371,7 +370,7 @@ tracesys_exit:
 tracesys_sigexit:
 	ldo     -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1      /* get task ptr */
 	LDREG	0(%r1), %r1
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29			/* Reference param save area */
 #endif
 	bl	syscall_trace, %r2
@@ -404,7 +403,7 @@ lws_start:
 	gate	.+8, %r0
 	depi	3, 31, 2, %r31	/* Ensure we return to userspace */
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* FIXME: If we are a 64-bit kernel just
 	 *        turn this on unconditionally.
 	 */
@@ -440,7 +439,7 @@ lws_exit_nosys:
 	/* Fall through: Return to userspace */
 
 lws_exit:
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* decide whether to reset the wide mode bit
 	 *
 	 * For a syscall, the W bit is stored in the lowest bit
@@ -486,7 +485,7 @@ lws_exit:
 
 	/* ELF64 Process entry path */
 lws_compare_and_swap64:
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	b,n	lws_compare_and_swap
 #else
 	/* If we are not a 64-bit kernel, then we don't
@@ -497,7 +496,7 @@ lws_compare_and_swap64:
 
 	/* ELF32 Process entry path */
 lws_compare_and_swap32:
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* Clip all the input registers */
 	depdi	0, 31, 32, %r26
 	depdi	0, 31, 32, %r25
@@ -528,6 +527,7 @@ lws_compare_and_swap:
 		We *must* giveup this call and fail.
 	*/
 	ldw	4(%sr2,%r20), %r28			/* Load thread register */
+	/* WARNING: If cr27 cycles to the same value we have problems */
 	mfctl	%cr27, %r21				/* Get current thread register */
 	cmpb,<>,n	%r21, %r28, cas_lock		/* Called recursive? */
 	b	lws_exit				/* Return error! */
@@ -608,7 +608,7 @@ cas_action:
 	   the other for the store. Either return -EFAULT.
 	   Each of the entries must be relocated. */
 	.section __ex_table,"aw"
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* Pad the address calculation */
 	.word	0,(2b - linux_gateway_page)
 	.word	0,(3b - linux_gateway_page)
@@ -619,7 +619,7 @@ cas_action:
 	.previous
 
 	.section __ex_table,"aw"
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* Pad the address calculation */
 	.word	0,(1b - linux_gateway_page)
 	.word	0,(3b - linux_gateway_page)
@@ -638,7 +638,7 @@ end_linux_gateway_page:
 
 	/* Relocate symbols assuming linux_gateway_page is mapped
 	   to virtual address 0x0 */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* FIXME: The code will always be on the gateay page
 		  and thus it will be on the first 4k, the
 		  assembler seems to think that the final
@@ -666,7 +666,7 @@ lws_table:
 sys_call_table:
 #include "syscall_table.S"
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	.align 4096
 	.export sys_call_table64
 .Lsys_call_table64:
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index dcfa4d3d0e7d..32cbc0489324 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -35,7 +35,7 @@
 #undef ENTRY_UHOH
 #undef ENTRY_COMP
 #undef ENTRY_OURS
-#if defined(__LP64__) && !defined(SYSCALL_TABLE_64BIT)
+#if defined(CONFIG_64BIT) && !defined(SYSCALL_TABLE_64BIT)
 /* Use ENTRY_SAME for 32-bit syscalls which are the same on wide and
  * narrow palinux.  Use ENTRY_DIFF for those where a 32-bit specific
  * implementation is required on wide palinux.  Use ENTRY_COMP where
@@ -46,7 +46,7 @@
 #define ENTRY_UHOH(_name_) .dword sys32_##unimplemented
 #define ENTRY_OURS(_name_) .dword parisc_##_name_
 #define ENTRY_COMP(_name_) .dword compat_sys_##_name_
-#elif defined(__LP64__) && defined(SYSCALL_TABLE_64BIT)
+#elif defined(CONFIG_64BIT) && defined(SYSCALL_TABLE_64BIT)
 #define ENTRY_SAME(_name_) .dword sys_##_name_
 #define ENTRY_DIFF(_name_) .dword sys_##_name_
 #define ENTRY_UHOH(_name_) .dword sys_##_name_
@@ -368,5 +368,11 @@
 	ENTRY_COMP(mbind)		/* 260 */
 	ENTRY_COMP(get_mempolicy)
 	ENTRY_COMP(set_mempolicy)
+	ENTRY_SAME(ni_syscall)	/* 263: reserved for vserver */
+	ENTRY_SAME(add_key)
+	ENTRY_SAME(request_key)		/* 265 */
+	ENTRY_SAME(keyctl)
+	ENTRY_SAME(ioprio_set)
+	ENTRY_SAME(ioprio_get)
 	/* Nothing yet */
 
diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c
index 7ff67f8e9f8c..cded25680787 100644
--- a/arch/parisc/kernel/time.c
+++ b/arch/parisc/kernel/time.c
@@ -33,10 +33,6 @@
 
 #include <linux/timex.h>
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 /* xtime and wall_jiffies keep wall-clock time */
 extern unsigned long wall_jiffies;
 
@@ -89,14 +85,6 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 		}
 	}
     
-#ifdef CONFIG_CHASSIS_LCD_LED
-	/* Only schedule the led tasklet on cpu 0, and only if it
-	 * is enabled.
-	 */
-	if (cpu == 0 && !atomic_read(&led_tasklet.count))
-		tasklet_schedule(&led_tasklet);
-#endif
-
 	/* check soft power switch status */
 	if (cpu == 0 && !atomic_read(&power_tasklet.count))
 		tasklet_schedule(&power_tasklet);
@@ -104,6 +92,24 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 	return IRQ_HANDLED;
 }
 
+
+unsigned long profile_pc(struct pt_regs *regs)
+{
+	unsigned long pc = instruction_pointer(regs);
+
+	if (regs->gr[0] & PSW_N)
+		pc -= 4;
+
+#ifdef CONFIG_SMP
+	if (in_lock_functions(pc))
+		pc = regs->gr[2];
+#endif
+
+	return pc;
+}
+EXPORT_SYMBOL(profile_pc);
+
+
 /*** converted from ia64 ***/
 /*
  * Return the number of micro-seconds that elapsed since the last
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index d2e5b229a2f4..15914f0235a0 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -74,7 +74,10 @@ void show_regs(struct pt_regs *regs)
 	char *level;
 	unsigned long cr30;
 	unsigned long cr31;
-
+	/* carlos says that gcc understands better memory in a struct,
+	 * and it makes our life easier with fpregs -- T-Bone */
+	struct { u32 sw[2]; } s;
+	
 	level = user_mode(regs) ? KERN_DEBUG : KERN_CRIT;
 
 	printk("%s\n", level); /* don't want to have that pretty register dump messed up */
@@ -103,11 +106,33 @@ void show_regs(struct pt_regs *regs)
 		printk("%s\n", buf);
 	}
 
-#if RIDICULOUSLY_VERBOSE
-	for (i = 0; i < 32; i += 2)
-		printk("%sFR%02d : %016lx  FR%2d : %016lx", level, i,
-				regs->fr[i], i+1, regs->fr[i+1]);
-#endif
+	/* FR are 64bit everywhere. Need to use asm to get the content
+	 * of fpsr/fper1, and we assume that we won't have a FP Identify
+	 * in our way, otherwise we're screwed.
+	 * The fldd is used to restore the T-bit if there was one, as the
+	 * store clears it anyway.
+	 * BTW, PA2.0 book says "thou shall not use fstw on FPSR/FPERs". */ 
+	__asm__ (
+		"fstd %%fr0,0(%1)	\n\t"
+		"fldd 0(%1),%%fr0	\n\t"
+		: "=m" (s) : "r" (&s) : "%r0"
+		);
+
+	printk("%s\n", level);
+	printk("%s      VZOUICununcqcqcqcqcqcrmunTDVZOUI\n", level);
+	printbinary(buf, s.sw[0], 32);
+	printk("%sFPSR: %s\n", level, buf);
+	printk("%sFPER1: %08x\n", level, s.sw[1]);
+
+	/* here we'll print fr0 again, tho it'll be meaningless */
+	for (i = 0; i < 32; i += 4) {
+		int j;
+		p = buf;
+		p += sprintf(p, "%sfr%02d-%02d ", level, i, i + 3);
+		for (j = 0; j < 4; j++)
+			p += sprintf(p, " %016llx", (i+j) == 0 ? 0 : regs->fr[i+j]);
+		printk("%s\n", buf);
+	}
 
 	cr30 = mfctl(30);
 	cr31 = mfctl(31);
diff --git a/arch/parisc/kernel/unaligned.c b/arch/parisc/kernel/unaligned.c
index 62eea35bcd69..eaae8a021f9f 100644
--- a/arch/parisc/kernel/unaligned.c
+++ b/arch/parisc/kernel/unaligned.c
@@ -513,15 +513,18 @@ void handle_unaligned(struct pt_regs *regs)
 	register int flop=0;	/* true if this is a flop */
 
 	/* log a message with pacing */
-	if (user_mode(regs))
-	{
-		if (unaligned_count > 5 && jiffies - last_time > 5*HZ)
-		{
+	if (user_mode(regs)) {
+		if (current->thread.flags & PARISC_UAC_SIGBUS) {
+			goto force_sigbus;
+		}
+
+		if (unaligned_count > 5 && jiffies - last_time > 5*HZ) {
 			unaligned_count = 0;
 			last_time = jiffies;
 		}
-		if (++unaligned_count < 5)
-		{
+
+		if (!(current->thread.flags & PARISC_UAC_NOPRINT) 
+		    && ++unaligned_count < 5) {
 			char buf[256];
 			sprintf(buf, "%s(%d): unaligned access to 0x" RFMT " at ip=0x" RFMT "\n",
 				current->comm, current->pid, regs->ior, regs->iaoq[0]);
@@ -530,6 +533,7 @@ void handle_unaligned(struct pt_regs *regs)
 			show_regs(regs);
 #endif		
 		}
+
 		if (!unaligned_enabled)
 			goto force_sigbus;
 	}
diff --git a/arch/parisc/lib/fixup.S b/arch/parisc/lib/fixup.S
index 1b91612ed964..e0661c2978ed 100644
--- a/arch/parisc/lib/fixup.S
+++ b/arch/parisc/lib/fixup.S
@@ -35,7 +35,7 @@
 	extrd,u \t2,63,32,\t2
 #endif
 	/* t2 = &__per_cpu_offset[smp_processor_id()]; */
-	LDREG,s \t2(\t1),\t2 
+	LDREGX \t2(\t1),\t2 
 	addil LT%per_cpu__exception_data,%r27
 	LDREG RT%per_cpu__exception_data(%r1),\t1
 	/* t1 = &__get_cpu_var(exception_data) */
@@ -53,6 +53,8 @@
 	.endm
 #endif
 
+	.level LEVEL
+
 	.text
 	.section .fixup, "ax"
 
diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c
index feb1b9f42c2b..b7098035321f 100644
--- a/arch/parisc/lib/memcpy.c
+++ b/arch/parisc/lib/memcpy.c
@@ -339,6 +339,7 @@ unsigned long pa_memcpy(void *dstp, const void *srcp, unsigned long len)
 	pds = (double *)pcs;
 	pdd = (double *)pcd;
 
+#if 0
 	/* Copy 8 doubles at a time */
 	while (len >= 8*sizeof(double)) {
 		register double r1, r2, r3, r4, r5, r6, r7, r8;
@@ -366,6 +367,7 @@ unsigned long pa_memcpy(void *dstp, const void *srcp, unsigned long len)
 		fstdma(d_space, r8, pdd, pmc_store_exc);
 		len -= 8*sizeof(double);
 	}
+#endif
 
 	pws = (unsigned int *)pds;
 	pwd = (unsigned int *)pdd;
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 2886ad70db48..29b998e430e6 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -505,7 +505,9 @@ void show_mem(void)
 
 		for (j = node_start_pfn(i); j < node_end_pfn(i); j++) {
 			struct page *p;
+			unsigned long flags;
 
+			pgdat_resize_lock(NODE_DATA(i), &flags);
 			p = nid_page_nr(i, j) - node_start_pfn(i);
 
 			total++;
@@ -517,6 +519,7 @@ void show_mem(void)
 				free++;
 			else
 				shared += page_count(p) - 1;
+			pgdat_resize_unlock(NODE_DATA(i), &flags);
         	}
 	}
 #endif
diff --git a/arch/parisc/mm/ioremap.c b/arch/parisc/mm/ioremap.c
index f2df502cdae3..5c7a1b3b9326 100644
--- a/arch/parisc/mm/ioremap.c
+++ b/arch/parisc/mm/ioremap.c
@@ -52,7 +52,7 @@ static inline int remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned lo
 	if (address >= end)
 		BUG();
 	do {
-		pte_t * pte = pte_alloc_kernel(NULL, pmd, address);
+		pte_t * pte = pte_alloc_kernel(pmd, address);
 		if (!pte)
 			return -ENOMEM;
 		remap_area_pte(pte, address, end - address, address + phys_addr, flags);
@@ -75,10 +75,9 @@ static int remap_area_pages(unsigned long address, unsigned long phys_addr,
 	flush_cache_all();
 	if (address >= end)
 		BUG();
-	spin_lock(&init_mm.page_table_lock);
 	do {
 		pmd_t *pmd;
-		pmd = pmd_alloc(dir, address);
+		pmd = pmd_alloc(&init_mm, dir, address);
 		error = -ENOMEM;
 		if (!pmd)
 			break;
@@ -89,7 +88,6 @@ static int remap_area_pages(unsigned long address, unsigned long phys_addr,
 		address = (address + PGDIR_SIZE) & PGDIR_MASK;
 		dir++;
 	} while (address && (address < end));
-	spin_unlock(&init_mm.page_table_lock);
 	flush_tlb_all();
 	return error;
 }
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
new file mode 100644
index 000000000000..bb2efdd566a9
--- /dev/null
+++ b/arch/powerpc/Kconfig
@@ -0,0 +1,940 @@
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+
+mainmenu "Linux/PowerPC Kernel Configuration"
+
+config PPC64
+	bool "64-bit kernel"
+	default n
+	help
+	  This option selects whether a 32-bit or a 64-bit kernel
+	  will be built.
+
+config PPC32
+	bool
+	default y if !PPC64
+
+config 64BIT
+	bool
+	default y if PPC64
+
+config PPC_MERGE
+	def_bool y
+
+config MMU
+	bool
+	default y
+
+config UID16
+	bool
+
+config GENERIC_HARDIRQS
+	bool
+	default y
+
+config RWSEM_GENERIC_SPINLOCK
+	bool
+
+config RWSEM_XCHGADD_ALGORITHM
+	bool
+	default y
+
+config GENERIC_CALIBRATE_DELAY
+	bool
+	default y
+
+config PPC
+	bool
+	default y
+
+config EARLY_PRINTK
+	bool
+	default y if PPC64
+
+config COMPAT
+	bool
+	default y if PPC64
+
+config SYSVIPC_COMPAT
+	bool
+	depends on COMPAT && SYSVIPC
+	default y
+
+# All PPC32s use generic nvram driver through ppc_md
+config GENERIC_NVRAM
+	bool
+	default y if PPC32
+
+config SCHED_NO_NO_OMIT_FRAME_POINTER
+	bool
+	default y
+
+config ARCH_MAY_HAVE_PC_FDC
+	bool
+	default y
+
+menu "Processor support"
+choice
+	prompt "Processor Type"
+	depends on PPC32
+	default 6xx
+
+config 6xx
+	bool "6xx/7xx/74xx"
+	select PPC_FPU
+	help
+	  There are four families of PowerPC chips supported.  The more common
+	  types (601, 603, 604, 740, 750, 7400), the Motorola embedded
+	  versions (821, 823, 850, 855, 860, 52xx, 82xx, 83xx), the AMCC
+	  embedded versions (403 and 405) and the high end 64 bit Power
+	  processors (POWER 3, POWER4, and IBM PPC970 also known as G5).
+	  
+	  Unless you are building a kernel for one of the embedded processor
+	  systems, 64 bit IBM RS/6000 or an Apple G5, choose 6xx.
+	  Note that the kernel runs in 32-bit mode even on 64-bit chips.
+
+config PPC_52xx
+	bool "Freescale 52xx"
+	
+config PPC_82xx
+	bool "Freescale 82xx"
+
+config PPC_83xx
+	bool "Freescale 83xx"
+
+config 40x
+	bool "AMCC 40x"
+
+config 44x
+	bool "AMCC 44x"
+
+config 8xx
+	bool "Freescale 8xx"
+
+config E200
+	bool "Freescale e200"
+
+config E500
+	bool "Freescale e500"
+endchoice
+
+config POWER4_ONLY
+	bool "Optimize for POWER4"
+	depends on PPC64
+	default n
+	---help---
+	  Cause the compiler to optimize for POWER4/POWER5/PPC970 processors.
+	  The resulting binary will not work on POWER3 or RS64 processors
+	  when compiled with binutils 2.15 or later.
+
+config POWER3
+	bool
+	depends on PPC64
+	default y if !POWER4_ONLY
+
+config POWER4
+	depends on PPC64
+	def_bool y
+
+config PPC_FPU
+	bool
+	default y if PPC64
+
+config BOOKE
+	bool
+	depends on E200 || E500
+	default y
+
+config FSL_BOOKE
+	bool
+	depends on E200 || E500
+	default y
+
+config PTE_64BIT
+	bool
+	depends on 44x || E500
+	default y if 44x
+	default y if E500 && PHYS_64BIT
+
+config PHYS_64BIT
+	bool 'Large physical address support' if E500
+	depends on 44x || E500
+	default y if 44x
+	---help---
+	  This option enables kernel support for larger than 32-bit physical
+	  addresses.  This features is not be available on all e500 cores.
+
+	  If in doubt, say N here.
+
+config ALTIVEC
+	bool "AltiVec Support"
+	depends on 6xx || POWER4
+	---help---
+	  This option enables kernel support for the Altivec extensions to the
+	  PowerPC processor. The kernel currently supports saving and restoring
+	  altivec registers, and turning on the 'altivec enable' bit so user
+	  processes can execute altivec instructions.
+
+	  This option is only usefully if you have a processor that supports
+	  altivec (G4, otherwise known as 74xx series), but does not have
+	  any affect on a non-altivec cpu (it does, however add code to the
+	  kernel).
+
+	  If in doubt, say Y here.
+
+config SPE
+	bool "SPE Support"
+	depends on E200 || E500
+	---help---
+	  This option enables kernel support for the Signal Processing
+	  Extensions (SPE) to the PowerPC processor. The kernel currently
+	  supports saving and restoring SPE registers, and turning on the
+	  'spe enable' bit so user processes can execute SPE instructions.
+
+	  This option is only useful if you have a processor that supports
+	  SPE (e500, otherwise known as 85xx series), but does not have any
+	  effect on a non-spe cpu (it does, however add code to the kernel).
+
+	  If in doubt, say Y here.
+
+config PPC_STD_MMU
+	bool
+	depends on 6xx || POWER3 || POWER4 || PPC64
+	default y
+
+config PPC_STD_MMU_32
+	def_bool y
+	depends on PPC_STD_MMU && PPC32
+
+config SMP
+	depends on PPC_STD_MMU
+	bool "Symmetric multi-processing support"
+	---help---
+	  This enables support for systems with more than one CPU. If you have
+	  a system with only one CPU, say N. If you have a system with more
+	  than one CPU, say Y.  Note that the kernel does not currently
+	  support SMP machines with 603/603e/603ev or PPC750 ("G3") processors
+	  since they have inadequate hardware support for multiprocessor
+	  operation.
+
+	  If you say N here, the kernel will run on single and multiprocessor
+	  machines, but will use only one CPU of a multiprocessor machine. If
+	  you say Y here, the kernel will run on single-processor machines.
+	  On a single-processor machine, the kernel will run faster if you say
+	  N here.
+
+	  If you don't know what to do here, say N.
+
+config NR_CPUS
+	int "Maximum number of CPUs (2-32)"
+	range 2 128
+	depends on SMP
+	default "32" if PPC64
+	default "4"
+
+config NOT_COHERENT_CACHE
+	bool
+	depends on 4xx || 8xx || E200
+	default y
+endmenu
+
+source "init/Kconfig"
+
+menu "Platform support"
+	depends on PPC64 || 6xx
+
+choice
+	prompt "Machine type"
+	default PPC_MULTIPLATFORM
+
+config PPC_MULTIPLATFORM
+	bool "Generic desktop/server/laptop"
+	help
+	  Select this option if configuring for an IBM pSeries or
+	  RS/6000 machine, an Apple machine, or a PReP, CHRP,
+	  Maple or Cell-based machine.
+
+config PPC_ISERIES
+	bool "IBM Legacy iSeries"
+	depends on PPC64
+
+config EMBEDDED6xx
+	bool "Embedded 6xx/7xx/7xxx-based board"
+	depends on PPC32 && BROKEN
+
+config APUS
+	bool "Amiga-APUS"
+	depends on PPC32 && BROKEN
+	help
+	  Select APUS if configuring for a PowerUP Amiga.
+	  More information is available at:
+	  <http://linux-apus.sourceforge.net/>.
+endchoice
+
+config PPC_PSERIES
+	depends on PPC_MULTIPLATFORM && PPC64
+	bool "  IBM pSeries & new (POWER5-based) iSeries"
+	select PPC_I8259
+	select PPC_RTAS
+	select RTAS_ERROR_LOGGING
+	default y
+
+config PPC_CHRP
+	bool "  Common Hardware Reference Platform (CHRP) based machines"
+	depends on PPC_MULTIPLATFORM && PPC32
+	select PPC_I8259
+	select PPC_INDIRECT_PCI
+	select PPC_RTAS
+	select PPC_MPC106
+	default y
+
+config PPC_PMAC
+	bool "  Apple PowerMac based machines"
+	depends on PPC_MULTIPLATFORM
+	select PPC_INDIRECT_PCI if PPC32
+	select PPC_MPC106 if PPC32
+	default y
+
+config PPC_PMAC64
+	bool
+	depends on PPC_PMAC && POWER4
+	select U3_DART
+	select GENERIC_TBSYNC
+	default y
+
+config PPC_PREP
+	bool "  PowerPC Reference Platform (PReP) based machines"
+	depends on PPC_MULTIPLATFORM && PPC32 && BROKEN
+	select PPC_I8259
+	select PPC_INDIRECT_PCI
+	default y
+
+config PPC_MAPLE
+	depends on PPC_MULTIPLATFORM && PPC64
+	bool "  Maple 970FX Evaluation Board"
+	select U3_DART
+	select MPIC_BROKEN_U3
+	select GENERIC_TBSYNC
+	default n
+	help
+          This option enables support for the Maple 970FX Evaluation Board.
+	  For more informations, refer to <http://www.970eval.com>
+
+config PPC_CELL
+	bool "  Cell Broadband Processor Architecture"
+	depends on PPC_MULTIPLATFORM && PPC64
+	select PPC_RTAS
+	select MMIO_NVRAM
+
+config PPC_OF
+	bool
+	depends on PPC_MULTIPLATFORM	# for now
+	default y
+
+config XICS
+	depends on PPC_PSERIES
+	bool
+	default y
+
+config U3_DART
+	bool 
+	depends on PPC_MULTIPLATFORM && PPC64
+	default n
+
+config MPIC
+	depends on PPC_PSERIES || PPC_PMAC || PPC_MAPLE || PPC_CHRP
+	bool
+	default y
+
+config PPC_RTAS
+	bool
+	default n
+
+config RTAS_ERROR_LOGGING
+	bool
+	depends on PPC_RTAS
+	default n
+
+config RTAS_PROC
+	bool "Proc interface to RTAS"
+	depends on PPC_RTAS
+	default y
+
+config RTAS_FLASH
+	tristate "Firmware flash interface"
+	depends on PPC64 && RTAS_PROC
+
+config MMIO_NVRAM
+	bool
+	default n
+
+config MPIC_BROKEN_U3
+	bool
+	depends on PPC_MAPLE
+	default y
+
+config CELL_IIC
+	depends on PPC_CELL
+	bool
+	default y
+
+config IBMVIO
+	depends on PPC_PSERIES || PPC_ISERIES
+	bool
+	default y
+
+config PPC_MPC106
+	bool
+	default n
+
+config GENERIC_TBSYNC
+	bool
+	default y if CONFIG_PPC32 && CONFIG_SMP
+	default n
+
+source "drivers/cpufreq/Kconfig"
+
+config CPU_FREQ_PMAC
+	bool "Support for Apple PowerBooks"
+	depends on CPU_FREQ && ADB_PMU && PPC32
+	select CPU_FREQ_TABLE
+	help
+	  This adds support for frequency switching on Apple PowerBooks,
+	  this currently includes some models of iBook & Titanium
+	  PowerBook.
+
+config CPU_FREQ_PMAC64
+	bool "Support for some Apple G5s"
+	depends on CPU_FREQ && PMAC_SMU && PPC64
+	select CPU_FREQ_TABLE
+	help
+	  This adds support for frequency switching on Apple iMac G5,
+	  and some of the more recent desktop G5 machines as well.
+
+config PPC601_SYNC_FIX
+	bool "Workarounds for PPC601 bugs"
+	depends on 6xx && (PPC_PREP || PPC_PMAC)
+	help
+	  Some versions of the PPC601 (the first PowerPC chip) have bugs which
+	  mean that extra synchronization instructions are required near
+	  certain instructions, typically those that make major changes to the
+	  CPU state.  These extra instructions reduce performance slightly.
+	  If you say N here, these extra instructions will not be included,
+	  resulting in a kernel which will run faster but may not run at all
+	  on some systems with the PPC601 chip.
+
+	  If in doubt, say Y here.
+
+config TAU
+	bool "Thermal Management Support"
+	depends on 6xx
+	help
+	  G3 and G4 processors have an on-chip temperature sensor called the
+	  'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
+	  temperature within 2-4 degrees Celsius. This option shows the current
+	  on-die temperature in /proc/cpuinfo if the cpu supports it.
+
+	  Unfortunately, on some chip revisions, this sensor is very inaccurate
+	  and in some cases, does not work at all, so don't assume the cpu
+	  temp is actually what /proc/cpuinfo says it is.
+
+config TAU_INT
+	bool "Interrupt driven TAU driver (DANGEROUS)"
+	depends on TAU
+	---help---
+	  The TAU supports an interrupt driven mode which causes an interrupt
+	  whenever the temperature goes out of range. This is the fastest way
+	  to get notified the temp has exceeded a range. With this option off,
+	  a timer is used to re-check the temperature periodically.
+
+	  However, on some cpus it appears that the TAU interrupt hardware
+	  is buggy and can cause a situation which would lead unexplained hard
+	  lockups.
+
+	  Unless you are extending the TAU driver, or enjoy kernel/hardware
+	  debugging, leave this option off.
+
+config TAU_AVERAGE
+	bool "Average high and low temp"
+	depends on TAU
+	---help---
+	  The TAU hardware can compare the temperature to an upper and lower
+	  bound.  The default behavior is to show both the upper and lower
+	  bound in /proc/cpuinfo. If the range is large, the temperature is
+	  either changing a lot, or the TAU hardware is broken (likely on some
+	  G4's). If the range is small (around 4 degrees), the temperature is
+	  relatively stable.  If you say Y here, a single temperature value,
+	  halfway between the upper and lower bounds, will be reported in
+	  /proc/cpuinfo.
+
+	  If in doubt, say N here.
+endmenu
+
+source arch/powerpc/platforms/embedded6xx/Kconfig
+source arch/powerpc/platforms/4xx/Kconfig
+source arch/powerpc/platforms/85xx/Kconfig
+source arch/powerpc/platforms/8xx/Kconfig
+
+menu "Kernel options"
+
+config HIGHMEM
+	bool "High memory support"
+	depends on PPC32
+
+source kernel/Kconfig.hz
+source kernel/Kconfig.preempt
+source "fs/Kconfig.binfmt"
+
+# We optimistically allocate largepages from the VM, so make the limit
+# large enough (16MB). This badly named config option is actually
+# max order + 1
+config FORCE_MAX_ZONEORDER
+	int
+	depends on PPC64
+	default "9" if PPC_64K_PAGES
+	default "13"
+
+config MATH_EMULATION
+	bool "Math emulation"
+	depends on 4xx || 8xx || E200 || E500
+	---help---
+	  Some PowerPC chips designed for embedded applications do not have
+	  a floating-point unit and therefore do not implement the
+	  floating-point instructions in the PowerPC instruction set.  If you
+	  say Y here, the kernel will include code to emulate a floating-point
+	  unit, which will allow programs that use floating-point
+	  instructions to run.
+
+config IOMMU_VMERGE
+	bool "Enable IOMMU virtual merging (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && PPC64
+	default n
+	help
+	  Cause IO segments sent to a device for DMA to be merged virtually
+	  by the IOMMU when they happen to have been allocated contiguously.
+	  This doesn't add pressure to the IOMMU allocator. However, some
+	  drivers don't support getting large merged segments coming back
+	  from *_map_sg(). Say Y if you know the drivers you are using are
+	  properly handling this case.
+
+config HOTPLUG_CPU
+	bool "Support for enabling/disabling CPUs"
+	depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC)
+	---help---
+	  Say Y here to be able to disable and re-enable individual
+	  CPUs at runtime on SMP machines.
+
+	  Say N if you are unsure.
+
+config KEXEC
+	bool "kexec system call (EXPERIMENTAL)"
+	depends on PPC_MULTIPLATFORM && EXPERIMENTAL
+	help
+	  kexec is a system call that implements the ability to shutdown your
+	  current kernel, and to start another kernel.  It is like a reboot
+	  but it is indepedent of the system firmware.   And like a reboot
+	  you can start any kernel with it, not just Linux.
+
+	  The name comes from the similiarity to the exec system call.
+
+	  It is an ongoing process to be certain the hardware in a machine
+	  is properly shutdown, so do not be surprised if this code does not
+	  initially work for you.  It may help to enable device hotplugging
+	  support.  As of this writing the exact hardware interface is
+	  strongly in flux, so no good recommendation can be made.
+
+config EMBEDDEDBOOT
+	bool
+	depends on 8xx || 8260
+	default y
+
+config PC_KEYBOARD
+	bool "PC PS/2 style Keyboard"
+	depends on 4xx || CPM2
+
+config PPCBUG_NVRAM
+	bool "Enable reading PPCBUG NVRAM during boot" if PPLUS || LOPEC
+	default y if PPC_PREP
+
+config IRQ_ALL_CPUS
+	bool "Distribute interrupts on all CPUs by default"
+	depends on SMP && !MV64360
+	help
+	  This option gives the kernel permission to distribute IRQs across
+	  multiple CPUs.  Saying N here will route all IRQs to the first
+	  CPU.  Generally saying Y is safe, although some problems have been
+	  reported with SMP Power Macintoshes with this option enabled.
+
+source "arch/powerpc/platforms/pseries/Kconfig"
+
+config NUMA
+	bool "NUMA support"
+	depends on PPC64
+	default y if SMP && PPC_PSERIES
+
+config ARCH_SELECT_MEMORY_MODEL
+	def_bool y
+	depends on PPC64
+
+config ARCH_FLATMEM_ENABLE
+       def_bool y
+       depends on PPC64 && !NUMA
+
+config ARCH_SPARSEMEM_ENABLE
+	def_bool y
+
+config ARCH_SPARSEMEM_DEFAULT
+	def_bool y
+	depends on SMP && PPC_PSERIES
+
+source "mm/Kconfig"
+
+config HAVE_ARCH_EARLY_PFN_TO_NID
+	def_bool y
+	depends on NEED_MULTIPLE_NODES
+
+config ARCH_MEMORY_PROBE
+	def_bool y
+	depends on MEMORY_HOTPLUG
+
+config PPC_64K_PAGES
+	bool "64k page size"
+	depends on PPC64
+	help
+	  This option changes the kernel logical page size to 64k. On machines
+          without processor support for 64k pages, the kernel will simulate
+          them by loading each individual 4k page on demand transparently,
+          while on hardware with such support, it will be used to map
+          normal application pages.
+
+config SCHED_SMT
+	bool "SMT (Hyperthreading) scheduler support"
+	depends on PPC64 && SMP
+	default off
+	help
+	  SMT scheduler support improves the CPU scheduler's decision making
+	  when dealing with POWER5 cpus at a cost of slightly increased
+	  overhead in some places. If unsure say N here.
+
+config PROC_DEVICETREE
+	bool "Support for device tree in /proc"
+	depends on PROC_FS
+	help
+	  This option adds a device-tree directory under /proc which contains
+	  an image of the device tree that the kernel copies from Open
+	  Firmware or other boot firmware. If unsure, say Y here.
+
+source "arch/powerpc/platforms/prep/Kconfig"
+
+config CMDLINE_BOOL
+	bool "Default bootloader kernel arguments"
+	depends on !PPC_ISERIES
+
+config CMDLINE
+	string "Initial kernel command string"
+	depends on CMDLINE_BOOL
+	default "console=ttyS0,9600 console=tty0 root=/dev/sda2"
+	help
+	  On some platforms, there is currently no way for the boot loader to
+	  pass arguments to the kernel. For these platforms, you can supply
+	  some command-line options at build time by entering them here.  In
+	  most cases you will need to specify the root device here.
+
+if !44x || BROKEN
+source kernel/power/Kconfig
+endif
+
+config SECCOMP
+	bool "Enable seccomp to safely compute untrusted bytecode"
+	depends on PROC_FS
+	default y
+	help
+	  This kernel feature is useful for number crunching applications
+	  that may need to compute untrusted bytecode during their
+	  execution. By using pipes or other transports made available to
+	  the process as file descriptors supporting the read/write
+	  syscalls, it's possible to isolate those applications in
+	  their own address space using seccomp. Once seccomp is
+	  enabled via /proc/<pid>/seccomp, it cannot be disabled
+	  and the task is only allowed to execute a few safe syscalls
+	  defined by each seccomp mode.
+
+	  If unsure, say Y. Only embedded should say N here.
+
+endmenu
+
+config ISA_DMA_API
+	bool
+	default y
+
+menu "Bus options"
+
+config ISA
+	bool "Support for ISA-bus hardware"
+	depends on PPC_PREP || PPC_CHRP
+	select PPC_I8259
+	help
+	  Find out whether you have ISA slots on your motherboard.  ISA is the
+	  name of a bus system, i.e. the way the CPU talks to the other stuff
+	  inside your box.  If you have an Apple machine, say N here; if you
+	  have an IBM RS/6000 or pSeries machine or a PReP machine, say Y.  If
+	  you have an embedded board, consult your board documentation.
+
+config GENERIC_ISA_DMA
+	bool
+	depends on PPC64 || POWER4 || 6xx && !CPM2
+	default y
+
+config PPC_I8259
+	bool
+	default y if 85xx
+	default n
+
+config PPC_INDIRECT_PCI
+	bool
+	depends on PCI
+	default y if 40x || 44x || 85xx || 83xx
+	default n
+
+config EISA
+	bool
+
+config SBUS
+	bool
+
+# Yes MCA RS/6000s exist but Linux-PPC does not currently support any
+config MCA
+	bool
+
+config PCI
+	bool "PCI support" if 40x || CPM2 || 83xx || 85xx || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES)
+	default y if !40x && !CPM2 && !8xx && !APUS && !83xx && !85xx
+	default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS
+	default PCI_QSPAN if !4xx && !CPM2 && 8xx
+	help
+	  Find out whether your system includes a PCI bus. PCI is the name of
+	  a bus system, i.e. the way the CPU talks to the other stuff inside
+	  your box.  If you say Y here, the kernel will include drivers and
+	  infrastructure code to support PCI bus devices.
+
+config PCI_DOMAINS
+	bool
+	default PCI
+
+config MPC83xx_PCI2
+	bool "  Supprt for 2nd PCI host controller"
+	depends on PCI && MPC834x
+	default y if MPC834x_SYS
+
+config PCI_QSPAN
+	bool "QSpan PCI"
+	depends on !4xx && !CPM2 && 8xx
+	select PPC_I8259
+	help
+	  Say Y here if you have a system based on a Motorola 8xx-series
+	  embedded processor with a QSPAN PCI interface, otherwise say N.
+
+config PCI_8260
+	bool
+	depends on PCI && 8260
+	select PPC_INDIRECT_PCI
+	default y
+
+config 8260_PCI9
+	bool "  Enable workaround for MPC826x erratum PCI 9"
+	depends on PCI_8260 && !ADS8272
+	default y
+
+choice
+	prompt "  IDMA channel for PCI 9 workaround"
+	depends on 8260_PCI9
+
+config 8260_PCI9_IDMA1
+	bool "IDMA1"
+
+config 8260_PCI9_IDMA2
+	bool "IDMA2"
+
+config 8260_PCI9_IDMA3
+	bool "IDMA3"
+
+config 8260_PCI9_IDMA4
+	bool "IDMA4"
+
+endchoice
+
+source "drivers/pci/Kconfig"
+
+source "drivers/pcmcia/Kconfig"
+
+source "drivers/pci/hotplug/Kconfig"
+
+endmenu
+
+menu "Advanced setup"
+	depends on PPC32
+
+config ADVANCED_OPTIONS
+	bool "Prompt for advanced kernel configuration options"
+	help
+	  This option will enable prompting for a variety of advanced kernel
+	  configuration options.  These options can cause the kernel to not
+	  work if they are set incorrectly, but can be used to optimize certain
+	  aspects of kernel memory management.
+
+	  Unless you know what you are doing, say N here.
+
+comment "Default settings for advanced configuration options are used"
+	depends on !ADVANCED_OPTIONS
+
+config HIGHMEM_START_BOOL
+	bool "Set high memory pool address"
+	depends on ADVANCED_OPTIONS && HIGHMEM
+	help
+	  This option allows you to set the base address of the kernel virtual
+	  area used to map high memory pages.  This can be useful in
+	  optimizing the layout of kernel virtual memory.
+
+	  Say N here unless you know what you are doing.
+
+config HIGHMEM_START
+	hex "Virtual start address of high memory pool" if HIGHMEM_START_BOOL
+	default "0xfe000000"
+
+config LOWMEM_SIZE_BOOL
+	bool "Set maximum low memory"
+	depends on ADVANCED_OPTIONS
+	help
+	  This option allows you to set the maximum amount of memory which
+	  will be used as "low memory", that is, memory which the kernel can
+	  access directly, without having to set up a kernel virtual mapping.
+	  This can be useful in optimizing the layout of kernel virtual
+	  memory.
+
+	  Say N here unless you know what you are doing.
+
+config LOWMEM_SIZE
+	hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
+	default "0x30000000"
+
+config KERNEL_START_BOOL
+	bool "Set custom kernel base address"
+	depends on ADVANCED_OPTIONS
+	help
+	  This option allows you to set the kernel virtual address at which
+	  the kernel will map low memory (the kernel image will be linked at
+	  this address).  This can be useful in optimizing the virtual memory
+	  layout of the system.
+
+	  Say N here unless you know what you are doing.
+
+config KERNEL_START
+	hex "Virtual address of kernel base" if KERNEL_START_BOOL
+	default "0xc0000000"
+
+config TASK_SIZE_BOOL
+	bool "Set custom user task size"
+	depends on ADVANCED_OPTIONS
+	help
+	  This option allows you to set the amount of virtual address space
+	  allocated to user tasks.  This can be useful in optimizing the
+	  virtual memory layout of the system.
+
+	  Say N here unless you know what you are doing.
+
+config TASK_SIZE
+	hex "Size of user task space" if TASK_SIZE_BOOL
+	default "0x80000000"
+
+config CONSISTENT_START_BOOL
+	bool "Set custom consistent memory pool address"
+	depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
+	help
+	  This option allows you to set the base virtual address
+	  of the the consistent memory pool.  This pool of virtual
+	  memory is used to make consistent memory allocations.
+
+config CONSISTENT_START
+	hex "Base virtual address of consistent memory pool" if CONSISTENT_START_BOOL
+	default "0xff100000" if NOT_COHERENT_CACHE
+
+config CONSISTENT_SIZE_BOOL
+	bool "Set custom consistent memory pool size"
+	depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
+	help
+	  This option allows you to set the size of the the
+	  consistent memory pool.  This pool of virtual memory
+	  is used to make consistent memory allocations.
+
+config CONSISTENT_SIZE
+	hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
+	default "0x00200000" if NOT_COHERENT_CACHE
+
+config BOOT_LOAD_BOOL
+	bool "Set the boot link/load address"
+	depends on ADVANCED_OPTIONS && !PPC_MULTIPLATFORM
+	help
+	  This option allows you to set the initial load address of the zImage
+	  or zImage.initrd file.  This can be useful if you are on a board
+	  which has a small amount of memory.
+
+	  Say N here unless you know what you are doing.
+
+config BOOT_LOAD
+	hex "Link/load address for booting" if BOOT_LOAD_BOOL
+	default "0x00400000" if 40x || 8xx || 8260
+	default "0x01000000" if 44x
+	default "0x00800000"
+
+config PIN_TLB
+	bool "Pinned Kernel TLBs (860 ONLY)"
+	depends on ADVANCED_OPTIONS && 8xx
+endmenu
+
+if PPC64
+config KERNEL_START
+	hex
+	default "0xc000000000000000"
+endif
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+# XXX source "arch/ppc/8xx_io/Kconfig"
+
+# XXX source "arch/ppc/8260_io/Kconfig"
+
+source "arch/powerpc/platforms/iseries/Kconfig"
+
+source "lib/Kconfig"
+
+menu "Instrumentation Support"
+        depends on EXPERIMENTAL
+
+source "arch/powerpc/oprofile/Kconfig"
+
+config KPROBES
+	bool "Kprobes (EXPERIMENTAL)"
+	depends on PPC64
+	help
+	  Kprobes allows you to trap at almost any kernel address and
+	  execute a callback function.  register_kprobe() establishes
+	  a probepoint and specifies the callback.  Kprobes is useful
+	  for kernel debugging, non-intrusive instrumentation and testing.
+	  If in doubt, say "N".
+endmenu
+
+source "arch/powerpc/Kconfig.debug"
+
+source "security/Kconfig"
+
+config KEYS_COMPAT
+	bool
+	depends on COMPAT && KEYS
+	default y
+
+source "crypto/Kconfig"
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
new file mode 100644
index 000000000000..30a30bf559ea
--- /dev/null
+++ b/arch/powerpc/Kconfig.debug
@@ -0,0 +1,118 @@
+menu "Kernel hacking"
+
+source "lib/Kconfig.debug"
+
+config DEBUG_STACKOVERFLOW
+	bool "Check for stack overflows"
+	depends on DEBUG_KERNEL && PPC64
+	help
+	  This option will cause messages to be printed if free stack space
+	  drops below a certain limit.
+
+config DEBUG_STACK_USAGE
+	bool "Stack utilization instrumentation"
+	depends on DEBUG_KERNEL && PPC64
+	help
+	  Enables the display of the minimum amount of free stack which each
+	  task has ever had available in the sysrq-T and sysrq-P debug output.
+
+	  This option will slow down process creation somewhat.
+
+config DEBUGGER
+	bool "Enable debugger hooks"
+	depends on DEBUG_KERNEL
+	help
+	  Include in-kernel hooks for kernel debuggers. Unless you are
+	  intending to debug the kernel, say N here.
+
+config KGDB
+	bool "Include kgdb kernel debugger"
+	depends on DEBUGGER && (BROKEN || PPC_GEN550 || 4xx)
+	select DEBUG_INFO
+	help
+	  Include in-kernel hooks for kgdb, the Linux kernel source level
+	  debugger.  See <http://kgdb.sourceforge.net/> for more information.
+	  Unless you are intending to debug the kernel, say N here.
+
+choice
+	prompt "Serial Port"
+	depends on KGDB
+	default KGDB_TTYS1
+
+config KGDB_TTYS0
+	bool "ttyS0"
+
+config KGDB_TTYS1
+	bool "ttyS1"
+
+config KGDB_TTYS2
+	bool "ttyS2"
+
+config KGDB_TTYS3
+	bool "ttyS3"
+
+endchoice
+
+config KGDB_CONSOLE
+	bool "Enable serial console thru kgdb port"
+	depends on KGDB && 8xx || CPM2
+	help
+	  If you enable this, all serial console messages will be sent
+	  over the gdb stub.
+	  If unsure, say N.
+
+config XMON
+	bool "Include xmon kernel debugger"
+	depends on DEBUGGER && !PPC_ISERIES
+	help
+	  Include in-kernel hooks for the xmon kernel monitor/debugger.
+	  Unless you are intending to debug the kernel, say N here.
+	  Make sure to enable also CONFIG_BOOTX_TEXT on Macs. Otherwise
+	  nothing will appear on the screen (xmon writes directly to the
+	  framebuffer memory).
+	  The cmdline option 'xmon' or 'xmon=early' will drop into xmon
+	  very early during boot. 'xmon=on' will just enable the xmon
+	  debugger hooks.  'xmon=off' will disable the debugger hooks
+	  if CONFIG_XMON_DEFAULT is set.
+
+config XMON_DEFAULT
+	bool "Enable xmon by default"
+	depends on XMON
+	help
+	  xmon is normally disabled unless booted with 'xmon=on'.
+	  Use 'xmon=off' to disable xmon init during runtime.
+
+config IRQSTACKS
+	bool "Use separate kernel stacks when processing interrupts"
+	depends on PPC64
+	help
+	  If you say Y here the kernel will use separate kernel stacks
+	  for handling hard and soft interrupts.  This can help avoid
+	  overflowing the process kernel stacks.
+
+config BDI_SWITCH
+	bool "Include BDI-2000 user context switcher"
+	depends on DEBUG_KERNEL && PPC32
+	help
+	  Include in-kernel support for the Abatron BDI2000 debugger.
+	  Unless you are intending to debug the kernel with one of these
+	  machines, say N here.
+
+config BOOTX_TEXT
+	bool "Support for early boot text console (BootX or OpenFirmware only)"
+	depends PPC_OF && !PPC_ISERIES
+	help
+	  Say Y here to see progress messages from the boot firmware in text
+	  mode. Requires either BootX or Open Firmware.
+
+config SERIAL_TEXT_DEBUG
+	bool "Support for early boot texts over serial port"
+	depends on 4xx || LOPEC || MV64X60 || PPLUS || PRPMC800 || \
+		PPC_GEN550 || PPC_MPC52xx
+
+config PPC_OCP
+	bool
+	depends on IBM_OCP || XILINX_OCP
+	default y
+
+endmenu
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
new file mode 100644
index 000000000000..a13eb575f834
--- /dev/null
+++ b/arch/powerpc/Makefile
@@ -0,0 +1,211 @@
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies. Remember to do have actions
+# for "archclean" and "archdep" for cleaning up and making dependencies for
+# this architecture.
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1994 by Linus Torvalds
+# Changes for PPC by Gary Thomas
+# Rewritten by Cort Dougan and Paul Mackerras
+#
+
+HAS_BIARCH	:= $(call cc-option-yn, -m32)
+
+# Set default 32 bits cross compilers for vdso and boot wrapper
+CROSS32_COMPILE ?=
+
+CROSS32CC		:= $(CROSS32_COMPILE)gcc
+CROSS32AS		:= $(CROSS32_COMPILE)as
+CROSS32LD		:= $(CROSS32_COMPILE)ld
+CROSS32OBJCOPY		:= $(CROSS32_COMPILE)objcopy
+
+ifeq ($(HAS_BIARCH),y)
+ifeq ($(CROSS32_COMPILE),)
+CROSS32CC	:= $(CC) -m32
+CROSS32AS	:= $(AS) -a32
+CROSS32LD	:= $(LD) -m elf32ppc
+CROSS32OBJCOPY	:= $(OBJCOPY)
+endif
+endif
+
+export CROSS32CC CROSS32AS CROSS32LD CROSS32OBJCOPY
+
+KBUILD_DEFCONFIG := $(shell uname -m)_defconfig
+
+ifeq ($(CONFIG_PPC64),y)
+OLDARCH	:= ppc64
+SZ	:= 64
+
+new_nm := $(shell if $(NM) --help 2>&1 | grep -- '--synthetic' > /dev/null; then echo y; else echo n; fi)
+
+ifeq ($(new_nm),y)
+NM		:= $(NM) --synthetic
+endif
+
+else
+OLDARCH	:= ppc
+SZ	:= 32
+endif
+
+UTS_MACHINE := $(OLDARCH)
+
+ifeq ($(HAS_BIARCH),y)
+override AS	+= -a$(SZ)
+override LD	+= -m elf$(SZ)ppc
+override CC	+= -m$(SZ)
+endif
+
+LDFLAGS_vmlinux	:= -Bstatic
+
+# The -Iarch/$(ARCH)/include is temporary while we are merging
+CPPFLAGS-$(CONFIG_PPC32) := -Iarch/$(ARCH) -Iarch/$(ARCH)/include
+AFLAGS-$(CONFIG_PPC32)	:= -Iarch/$(ARCH)
+CFLAGS-$(CONFIG_PPC64)	:= -mminimal-toc -mtraceback=none  -mcall-aixdesc
+CFLAGS-$(CONFIG_PPC32)	:= -Iarch/$(ARCH) -ffixed-r2 -mmultiple
+CPPFLAGS	+= $(CPPFLAGS-y)
+AFLAGS		+= $(AFLAGS-y)
+CFLAGS		+= -msoft-float -pipe $(CFLAGS-y)
+CPP		= $(CC) -E $(CFLAGS)
+# Temporary hack until we have migrated to asm-powerpc
+LINUXINCLUDE-$(CONFIG_PPC32)	:= -Iarch/$(ARCH)/include
+LINUXINCLUDE    += $(LINUXINCLUDE-y)
+
+CHECKFLAGS	+= -m$(SZ) -D__powerpc__ -D__powerpc$(SZ)__
+
+ifeq ($(CONFIG_PPC64),y)
+GCC_VERSION     := $(call cc-version)
+GCC_BROKEN_VEC	:= $(shell if [ $(GCC_VERSION) -lt 0400 ] ; then echo "y"; fi)
+
+ifeq ($(CONFIG_POWER4_ONLY),y)
+ifeq ($(CONFIG_ALTIVEC),y)
+ifeq ($(GCC_BROKEN_VEC),y)
+	CFLAGS += $(call cc-option,-mcpu=970)
+else
+	CFLAGS += $(call cc-option,-mcpu=power4)
+endif
+else
+	CFLAGS += $(call cc-option,-mcpu=power4)
+endif
+else
+	CFLAGS += $(call cc-option,-mtune=power4)
+endif
+endif
+
+# No AltiVec instruction when building kernel
+CFLAGS += $(call cc-option,-mno-altivec)
+
+# Enable unit-at-a-time mode when possible. It shrinks the
+# kernel considerably.
+CFLAGS += $(call cc-option,-funit-at-a-time)
+
+ifndef CONFIG_FSL_BOOKE
+CFLAGS		+= -mstring
+endif
+
+cpu-as-$(CONFIG_PPC64BRIDGE)	+= -Wa,-mppc64bridge
+cpu-as-$(CONFIG_4xx)		+= -Wa,-m405
+cpu-as-$(CONFIG_6xx)		+= -Wa,-maltivec
+cpu-as-$(CONFIG_POWER4)		+= -Wa,-maltivec
+cpu-as-$(CONFIG_E500)		+= -Wa,-me500
+cpu-as-$(CONFIG_E200)		+= -Wa,-me200
+
+AFLAGS += $(cpu-as-y)
+CFLAGS += $(cpu-as-y)
+
+head-y				:= arch/powerpc/kernel/head_32.o
+head-$(CONFIG_PPC64)		:= arch/powerpc/kernel/head_64.o
+head-$(CONFIG_8xx)		:= arch/powerpc/kernel/head_8xx.o
+head-$(CONFIG_4xx)		:= arch/powerpc/kernel/head_4xx.o
+head-$(CONFIG_44x)		:= arch/powerpc/kernel/head_44x.o
+head-$(CONFIG_FSL_BOOKE)	:= arch/powerpc/kernel/head_fsl_booke.o
+
+head-$(CONFIG_PPC64)		+= arch/powerpc/kernel/entry_64.o
+head-$(CONFIG_PPC_FPU)		+= arch/powerpc/kernel/fpu.o
+
+core-y				+= arch/powerpc/kernel/ \
+				   arch/powerpc/mm/ \
+				   arch/powerpc/lib/ \
+				   arch/powerpc/sysdev/ \
+				   arch/powerpc/platforms/
+core-$(CONFIG_PPC32)		+= arch/ppc/kernel/
+core-$(CONFIG_MATH_EMULATION)	+= arch/ppc/math-emu/
+core-$(CONFIG_XMON)		+= arch/powerpc/xmon/
+core-$(CONFIG_APUS)		+= arch/ppc/amiga/
+drivers-$(CONFIG_8xx)		+= arch/ppc/8xx_io/
+drivers-$(CONFIG_4xx)		+= arch/ppc/4xx_io/
+drivers-$(CONFIG_CPM2)		+= arch/ppc/8260_io/
+
+drivers-$(CONFIG_OPROFILE)	+= arch/powerpc/oprofile/
+
+defaultimage-$(CONFIG_PPC32)	:= zImage
+defaultimage-$(CONFIG_PPC_ISERIES) := vmlinux
+defaultimage-$(CONFIG_PPC_PSERIES) := zImage
+KBUILD_IMAGE := $(defaultimage-y)
+all: $(KBUILD_IMAGE)
+
+CPPFLAGS_vmlinux.lds	:= -Upowerpc
+
+# All the instructions talk about "make bzImage".
+bzImage: zImage
+
+BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm
+
+.PHONY: $(BOOT_TARGETS)
+
+boot := arch/$(ARCH)/boot
+
+$(BOOT_TARGETS): vmlinux
+	$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
+
+define archhelp
+  @echo '* zImage          - Compressed kernel image (arch/$(ARCH)/boot/zImage.*)'
+  @echo '  install         - Install kernel using'
+  @echo '                    (your) ~/bin/installkernel or'
+  @echo '                    (distribution) /sbin/installkernel or'
+  @echo '                    install to $$(INSTALL_PATH) and run lilo'
+  @echo '  *_defconfig     - Select default config from arch/$(ARCH)/configs'
+endef
+
+archclean:
+	$(Q)$(MAKE) $(clean)=$(boot)
+	$(Q)rm -rf arch/$(ARCH)/include
+
+archprepare: checkbin
+
+ifeq ($(CONFIG_PPC32),y)
+# Temporary hack until we have migrated to asm-powerpc
+include/asm: arch/$(ARCH)/include/asm
+arch/$(ARCH)/include/asm: FORCE
+	$(Q)if [ ! -d arch/$(ARCH)/include ]; then mkdir -p arch/$(ARCH)/include; fi
+	$(Q)ln -fsn $(srctree)/include/asm-$(OLDARCH) arch/$(ARCH)/include/asm
+endif
+
+# Use the file '.tmp_gas_check' for binutils tests, as gas won't output
+# to stdout and these checks are run even on install targets.
+TOUT	:= .tmp_gas_check
+# Ensure this is binutils 2.12.1 (or 2.12.90.0.7) or later for altivec
+# instructions.
+# gcc-3.4 and binutils-2.14 are a fatal combination.
+GCC_VERSION	:= $(call cc-version)
+
+checkbin:
+	@if test "$(GCC_VERSION)" = "0304" ; then \
+		if ! /bin/echo mftb 5 | $(AS) -v -mppc -many -o $(TOUT) >/dev/null 2>&1 ; then \
+			echo -n '*** ${VERSION}.${PATCHLEVEL} kernels no longer build '; \
+			echo 'correctly with gcc-3.4 and your version of binutils.'; \
+			echo '*** Please upgrade your binutils or downgrade your gcc'; \
+			false; \
+		fi ; \
+	fi
+	@if ! /bin/echo dssall | $(AS) -many -o $(TOUT) >/dev/null 2>&1 ; then \
+		echo -n '*** ${VERSION}.${PATCHLEVEL} kernels no longer build ' ; \
+		echo 'correctly with old versions of binutils.' ; \
+		echo '*** Please upgrade your binutils to 2.12.1 or newer' ; \
+		false ; \
+	fi
+
+CLEAN_FILES += $(TOUT)
+
diff --git a/arch/ppc64/boot/Makefile b/arch/powerpc/boot/Makefile
index 33fdc8710891..9770f587af73 100644
--- a/arch/ppc64/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -22,15 +22,47 @@
 
 
 HOSTCC		:= gcc
-BOOTCFLAGS	:= $(HOSTCFLAGS) -fno-builtin -nostdinc -isystem $(shell $(CROSS32CC) -print-file-name=include)
+BOOTCFLAGS	:= $(HOSTCFLAGS) -fno-builtin -nostdinc -isystem \
+		   $(shell $(CROSS32CC) -print-file-name=include) -fPIC
 BOOTAFLAGS	:= -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc
-BOOTLFLAGS	:= -Ttext 0x00400000 -e _start -T $(srctree)/$(src)/zImage.lds
+BOOTLFLAGS	:= -T $(srctree)/$(src)/zImage.lds
 OBJCOPYFLAGS    := contents,alloc,load,readonly,data
 
-src-boot := crt0.S string.S prom.c main.c zlib.c imagesize.c div64.S
+zlib       := infblock.c infcodes.c inffast.c inflate.c inftrees.c infutil.c
+zlibheader := infblock.h infcodes.h inffast.h inftrees.h infutil.h
+zliblinuxheader := zlib.h zconf.h zutil.h
+
+$(addprefix $(obj)/,$(zlib) main.o): $(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
+#$(addprefix $(obj)/,main.o): $(addprefix $(obj)/,zlib.h)
+
+src-boot := string.S prom.c main.c div64.S crt0.S
+src-boot += $(zlib)
 src-boot := $(addprefix $(obj)/, $(src-boot))
 obj-boot := $(addsuffix .o, $(basename $(src-boot)))
 
+BOOTCFLAGS	+= -I$(obj) -I$(srctree)/$(obj)
+
+quiet_cmd_copy_zlib = COPY    $@
+      cmd_copy_zlib = sed "s@__attribute_used__@@;s@<linux/\([^>]\+\).*@\"\1\"@" $< > $@
+
+quiet_cmd_copy_zlibheader = COPY    $@
+      cmd_copy_zlibheader = sed "s@<linux/\([^>]\+\).*@\"\1\"@" $< > $@
+# stddef.h for NULL
+quiet_cmd_copy_zliblinuxheader = COPY    $@
+      cmd_copy_zliblinuxheader = sed "s@<linux/string.h>@\"string.h\"@;s@<linux/kernel.h>@<stddef.h>@;s@<linux/\([^>]\+\).*@\"\1\"@" $< > $@
+
+$(addprefix $(obj)/,$(zlib)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
+	$(call cmd,copy_zlib)
+
+$(addprefix $(obj)/,$(zlibheader)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
+	$(call cmd,copy_zlibheader)
+
+$(addprefix $(obj)/,$(zliblinuxheader)): $(obj)/%: $(srctree)/include/linux/%
+	$(call cmd,copy_zliblinuxheader)
+
+clean-files := $(zlib) $(zlibheader) $(zliblinuxheader)
+
+
 quiet_cmd_bootcc = BOOTCC  $@
       cmd_bootcc = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $<
 
@@ -56,7 +88,7 @@ src-sec = $(foreach section, $(1), $(patsubst %,$(obj)/kernel-%.c, $(section)))
 gz-sec  = $(foreach section, $(1), $(patsubst %,$(obj)/kernel-%.gz, $(section)))
 
 hostprogs-y		:= addnote addRamDisk
-targets 		+= zImage.vmode zImage.initrd.vmode zImage zImage.initrd imagesize.c \
+targets 		+= zImage.vmode zImage.initrd.vmode zImage zImage.initrd \
 			   $(patsubst $(obj)/%,%, $(call obj-sec, $(required) $(initrd))) \
 			   $(patsubst $(obj)/%,%, $(call src-sec, $(required) $(initrd))) \
 			   $(patsubst $(obj)/%,%, $(call gz-sec, $(required) $(initrd))) \
@@ -67,11 +99,11 @@ quiet_cmd_ramdisk = RAMDISK $@
       cmd_ramdisk = $(obj)/addRamDisk $(obj)/ramdisk.image.gz $< $@
 
 quiet_cmd_stripvm = STRIP   $@
-      cmd_stripvm = $(STRIP) -s $< -o $@
+      cmd_stripvm = $(STRIP) -s -R .comment $< -o $@
 
-vmlinux.strip: vmlinux FORCE
+vmlinux.strip: vmlinux
 	$(call if_changed,stripvm)
-$(obj)/vmlinux.initrd: vmlinux.strip $(obj)/addRamDisk $(obj)/ramdisk.image.gz FORCE
+$(obj)/vmlinux.initrd: vmlinux.strip $(obj)/addRamDisk $(obj)/ramdisk.image.gz
 	$(call if_changed,ramdisk)
 
 quiet_cmd_addsection = ADDSEC  $@
@@ -79,48 +111,38 @@ quiet_cmd_addsection = ADDSEC  $@
 		--add-section=.kernel:$(strip $(patsubst $(obj)/kernel-%.o,%, $@))=$(patsubst %.o,%.gz, $@) \
 		--set-section-flags=.kernel:$(strip $(patsubst $(obj)/kernel-%.o,%, $@))=$(OBJCOPYFLAGS)
 
-quiet_cmd_imagesize = GENSIZE $@
-      cmd_imagesize = ls -l vmlinux.strip | \
-		awk '{printf "/* generated -- do not edit! */\n" "unsigned long vmlinux_filesize = %d;\n", $$5}' \
-		> $(obj)/imagesize.c && \
-		$(CROSS_COMPILE)nm -n vmlinux | tail -n 1 | \
-		awk '{printf "unsigned long vmlinux_memsize = 0x%s;\n", substr($$1,8)}' >> $(obj)/imagesize.c
-
 quiet_cmd_addnote = ADDNOTE $@
       cmd_addnote = $(obj)/addnote $@
 
-$(call gz-sec, $(required)): $(obj)/kernel-%.gz: % FORCE
+$(call gz-sec, $(required)): $(obj)/kernel-%.gz: %
 	$(call if_changed,gzip)
 
 $(obj)/kernel-initrd.gz: $(obj)/ramdisk.image.gz
 	cp -f $(obj)/ramdisk.image.gz $@
 
-$(call src-sec, $(required) $(initrd)): $(obj)/kernel-%.c: $(obj)/kernel-%.gz FORCE
+$(call src-sec, $(required) $(initrd)): $(obj)/kernel-%.c: $(obj)/kernel-%.gz
 	@touch $@
 
-$(call obj-sec, $(required) $(initrd)): $(obj)/kernel-%.o: $(obj)/kernel-%.c FORCE
+$(call obj-sec, $(required) $(initrd)): $(obj)/kernel-%.o: $(obj)/kernel-%.c
 	$(call if_changed_dep,bootcc)
 	$(call cmd,addsection)
 
 $(obj)/zImage.vmode: obj-boot += $(call obj-sec, $(required))
-$(obj)/zImage.vmode: $(call obj-sec, $(required)) $(obj-boot) FORCE
+$(obj)/zImage.vmode: $(call obj-sec, $(required)) $(obj-boot) $(srctree)/$(src)/zImage.lds
 	$(call cmd,bootld,$(obj-boot))
 
 $(obj)/zImage.initrd.vmode: obj-boot += $(call obj-sec, $(required) $(initrd))
-$(obj)/zImage.initrd.vmode: $(call obj-sec, $(required) $(initrd)) $(obj-boot) FORCE
+$(obj)/zImage.initrd.vmode: $(call obj-sec, $(required) $(initrd)) $(obj-boot) $(srctree)/$(src)/zImage.lds
 	$(call cmd,bootld,$(obj-boot))
 
-$(obj)/zImage: $(obj)/zImage.vmode $(obj)/addnote FORCE
+$(obj)/zImage: $(obj)/zImage.vmode $(obj)/addnote
 	@cp -f $< $@
 	$(call if_changed,addnote)
 
-$(obj)/zImage.initrd: $(obj)/zImage.initrd.vmode $(obj)/addnote FORCE
+$(obj)/zImage.initrd: $(obj)/zImage.initrd.vmode $(obj)/addnote
 	@cp -f $< $@
 	$(call if_changed,addnote)
 
-$(obj)/imagesize.c: vmlinux.strip
-	$(call cmd,imagesize)
-
 install: $(CONFIGURE) $(BOOTIMAGE)
 	sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" "$(BOOTIMAGE)"
 
diff --git a/arch/ppc64/boot/README b/arch/powerpc/boot/README
index 3e11058760e4..3e11058760e4 100644
--- a/arch/ppc64/boot/README
+++ b/arch/powerpc/boot/README
diff --git a/arch/ppc64/boot/addRamDisk.c b/arch/powerpc/boot/addRamDisk.c
index 7f2c09473394..c02a99952be7 100644
--- a/arch/ppc64/boot/addRamDisk.c
+++ b/arch/powerpc/boot/addRamDisk.c
@@ -5,11 +5,59 @@
 #include <sys/types.h>
 #include <sys/stat.h>
 #include <string.h>
+#include <elf.h>
 
 #define ElfHeaderSize  (64 * 1024)
 #define ElfPages  (ElfHeaderSize / 4096)
 #define KERNELBASE (0xc000000000000000)
+#define _ALIGN_UP(addr,size)	(((addr)+((size)-1))&(~((size)-1)))
 
+struct addr_range {
+	unsigned long long addr;
+	unsigned long memsize;
+	unsigned long offset;
+};
+
+static int check_elf64(void *p, int size, struct addr_range *r)
+{
+	Elf64_Ehdr *elf64 = p;
+	Elf64_Phdr *elf64ph;
+
+	if (elf64->e_ident[EI_MAG0] != ELFMAG0 ||
+	    elf64->e_ident[EI_MAG1] != ELFMAG1 ||
+	    elf64->e_ident[EI_MAG2] != ELFMAG2 ||
+	    elf64->e_ident[EI_MAG3] != ELFMAG3 ||
+	    elf64->e_ident[EI_CLASS] != ELFCLASS64 ||
+	    elf64->e_ident[EI_DATA] != ELFDATA2MSB ||
+	    elf64->e_type != ET_EXEC || elf64->e_machine != EM_PPC64)
+		return 0;
+
+	if ((elf64->e_phoff + sizeof(Elf64_Phdr)) > size)
+		return 0;
+
+	elf64ph = (Elf64_Phdr *) ((unsigned long)elf64 +
+				  (unsigned long)elf64->e_phoff);
+
+	r->memsize = (unsigned long)elf64ph->p_memsz;
+	r->offset = (unsigned long)elf64ph->p_offset;
+	r->addr = (unsigned long long)elf64ph->p_vaddr;
+
+#ifdef DEBUG
+	printf("PPC64 ELF file, ph:\n");
+	printf("p_type   0x%08x\n", elf64ph->p_type);
+	printf("p_flags  0x%08x\n", elf64ph->p_flags);
+	printf("p_offset 0x%016llx\n", elf64ph->p_offset);
+	printf("p_vaddr  0x%016llx\n", elf64ph->p_vaddr);
+	printf("p_paddr  0x%016llx\n", elf64ph->p_paddr);
+	printf("p_filesz 0x%016llx\n", elf64ph->p_filesz);
+	printf("p_memsz  0x%016llx\n", elf64ph->p_memsz);
+	printf("p_align  0x%016llx\n", elf64ph->p_align);
+	printf("... skipping 0x%08lx bytes of ELF header\n",
+	       (unsigned long)elf64ph->p_offset);
+#endif
+
+	return 64;
+}
 void get4k(FILE *file, char *buf )
 {
 	unsigned j;
@@ -34,97 +82,92 @@ void death(const char *msg, FILE *fdesc, const char *fname)
 int main(int argc, char **argv)
 {
 	char inbuf[4096];
-	FILE *ramDisk = NULL;
-	FILE *sysmap = NULL;
-	FILE *inputVmlinux = NULL;
-	FILE *outputVmlinux = NULL;
-  
-	unsigned i = 0;
-	unsigned long ramFileLen = 0;
-	unsigned long ramLen = 0;
-	unsigned long roundR = 0;
-  
-	unsigned long sysmapFileLen = 0;
-	unsigned long sysmapLen = 0;
-	unsigned long sysmapPages = 0;
-	char* ptr_end = NULL; 
-	unsigned long offset_end = 0;
-
-	unsigned long kernelLen = 0;
-	unsigned long actualKernelLen = 0;
-	unsigned long round = 0;
-	unsigned long roundedKernelLen = 0;
-	unsigned long ramStartOffs = 0;
-	unsigned long ramPages = 0;
-	unsigned long roundedKernelPages = 0;
-	unsigned long hvReleaseData = 0;
+	struct addr_range vmlinux;
+	FILE *ramDisk;
+	FILE *inputVmlinux;
+	FILE *outputVmlinux;
+
+	char *rd_name, *lx_name, *out_name;
+
+	size_t i;
+	unsigned long ramFileLen;
+	unsigned long ramLen;
+	unsigned long roundR;
+	unsigned long offset_end;
+
+	unsigned long kernelLen;
+	unsigned long actualKernelLen;
+	unsigned long round;
+	unsigned long roundedKernelLen;
+	unsigned long ramStartOffs;
+	unsigned long ramPages;
+	unsigned long roundedKernelPages;
+	unsigned long hvReleaseData;
 	u_int32_t eyeCatcher = 0xc8a5d9c4;
-	unsigned long naca = 0;
-	unsigned long xRamDisk = 0;
-	unsigned long xRamDiskSize = 0;
-	long padPages = 0;
+	unsigned long naca;
+	unsigned long xRamDisk;
+	unsigned long xRamDiskSize;
+	long padPages;
   
   
 	if (argc < 2) {
 		fprintf(stderr, "Name of RAM disk file missing.\n");
 		exit(1);
 	}
+	rd_name = argv[1];
 
 	if (argc < 3) {
-		fprintf(stderr, "Name of System Map input file is missing.\n");
-		exit(1);
-	}
-  
-	if (argc < 4) {
 		fprintf(stderr, "Name of vmlinux file missing.\n");
 		exit(1);
 	}
+	lx_name = argv[2];
 
-	if (argc < 5) {
+	if (argc < 4) {
 		fprintf(stderr, "Name of vmlinux output file missing.\n");
 		exit(1);
 	}
+	out_name = argv[3];
 
 
-	ramDisk = fopen(argv[1], "r");
+	ramDisk = fopen(rd_name, "r");
 	if ( ! ramDisk ) {
-		fprintf(stderr, "RAM disk file \"%s\" failed to open.\n", argv[1]);
+		fprintf(stderr, "RAM disk file \"%s\" failed to open.\n", rd_name);
 		exit(1);
 	}
 
-	sysmap = fopen(argv[2], "r");
-	if ( ! sysmap ) {
-		fprintf(stderr, "System Map file \"%s\" failed to open.\n", argv[2]);
-		exit(1);
-	}
-  
-	inputVmlinux = fopen(argv[3], "r");
+	inputVmlinux = fopen(lx_name, "r");
 	if ( ! inputVmlinux ) {
-		fprintf(stderr, "vmlinux file \"%s\" failed to open.\n", argv[3]);
+		fprintf(stderr, "vmlinux file \"%s\" failed to open.\n", lx_name);
 		exit(1);
 	}
   
-	outputVmlinux = fopen(argv[4], "w+");
+	outputVmlinux = fopen(out_name, "w+");
 	if ( ! outputVmlinux ) {
-		fprintf(stderr, "output vmlinux file \"%s\" failed to open.\n", argv[4]);
+		fprintf(stderr, "output vmlinux file \"%s\" failed to open.\n", out_name);
 		exit(1);
 	}
-  
-  
-  
+
+	i = fread(inbuf, 1, sizeof(inbuf), inputVmlinux);
+	if (i != sizeof(inbuf)) {
+		fprintf(stderr, "can not read vmlinux file %s: %u\n", lx_name, i);
+		exit(1);
+	}
+
+	i = check_elf64(inbuf, sizeof(inbuf), &vmlinux);
+	if (i == 0) {
+		fprintf(stderr, "You must have a linux kernel specified as argv[2]\n");
+		exit(1);
+	}
+
 	/* Input Vmlinux file */
 	fseek(inputVmlinux, 0, SEEK_END);
 	kernelLen = ftell(inputVmlinux);
 	fseek(inputVmlinux, 0, SEEK_SET);
-	printf("kernel file size = %d\n", kernelLen);
-	if ( kernelLen == 0 ) {
-		fprintf(stderr, "You must have a linux kernel specified as argv[3]\n");
-		exit(1);
-	}
+	printf("kernel file size = %lu\n", kernelLen);
 
 	actualKernelLen = kernelLen - ElfHeaderSize;
 
-	printf("actual kernel length (minus ELF header) = %d\n", actualKernelLen);
+	printf("actual kernel length (minus ELF header) = %lu\n", actualKernelLen);
 
 	round = actualKernelLen % 4096;
 	roundedKernelLen = actualKernelLen;
@@ -134,39 +177,7 @@ int main(int argc, char **argv)
 	roundedKernelPages = roundedKernelLen / 4096;
 	printf("Vmlinux pages to copy = %ld/0x%lx \n", roundedKernelPages, roundedKernelPages);
 
-
-
-	/* Input System Map file */
-	/* (needs to be processed simply to determine if we need to add pad pages due to the static variables not being included in the vmlinux) */
-	fseek(sysmap, 0, SEEK_END);
-	sysmapFileLen = ftell(sysmap);
-	fseek(sysmap, 0, SEEK_SET);
-	printf("%s file size = %ld/0x%lx \n", argv[2], sysmapFileLen, sysmapFileLen);
-
-	sysmapLen = sysmapFileLen;
-
-	roundR = 4096 - (sysmapLen % 4096);
-	if (roundR) {
-		printf("Rounding System Map file up to a multiple of 4096, adding %ld/0x%lx \n", roundR, roundR);
-		sysmapLen += roundR;
-	}
-	printf("Rounded System Map size is %ld/0x%lx \n", sysmapLen, sysmapLen);
-  
-	/* Process the Sysmap file to determine where _end is */
-	sysmapPages = sysmapLen / 4096;
-	/* read the whole file line by line, expect that it doesn't fail */
-	while ( fgets(inbuf, 4096, sysmap) )  ;
-	/* search for _end in the last page of the system map */
-	ptr_end = strstr(inbuf, " _end");
-	if (!ptr_end) {
-		fprintf(stderr, "Unable to find _end in the sysmap file \n");
-		fprintf(stderr, "inbuf: \n");
-		fprintf(stderr, "%s \n", inbuf);
-		exit(1);
-	}
-	printf("Found _end in the last page of the sysmap - backing up 10 characters it looks like %s", ptr_end-10);
-	/* convert address of _end in system map to hex offset. */
-	offset_end = (unsigned int)strtol(ptr_end-10, NULL, 16);
+	offset_end = _ALIGN_UP(vmlinux.memsize, 4096);
 	/* calc how many pages we need to insert between the vmlinux and the start of the ram disk */
 	padPages = offset_end/4096 - roundedKernelPages;
 
@@ -194,7 +205,7 @@ int main(int argc, char **argv)
 	fseek(ramDisk, 0, SEEK_END);
 	ramFileLen = ftell(ramDisk);
 	fseek(ramDisk, 0, SEEK_SET);
-	printf("%s file size = %ld/0x%lx \n", argv[1], ramFileLen, ramFileLen);
+	printf("%s file size = %ld/0x%lx \n", rd_name, ramFileLen, ramFileLen);
 
 	ramLen = ramFileLen;
 
@@ -248,19 +259,19 @@ int main(int argc, char **argv)
 	/* fseek to the hvReleaseData pointer */
 	fseek(outputVmlinux, ElfHeaderSize + 0x24, SEEK_SET);
 	if (fread(&hvReleaseData, 4, 1, outputVmlinux) != 1) {
-		death("Could not read hvReleaseData pointer\n", outputVmlinux, argv[4]);
+		death("Could not read hvReleaseData pointer\n", outputVmlinux, out_name);
 	}
 	hvReleaseData = ntohl(hvReleaseData); /* Convert to native int */
-	printf("hvReleaseData is at %08x\n", hvReleaseData);
+	printf("hvReleaseData is at %08lx\n", hvReleaseData);
 
 	/* fseek to the hvReleaseData */
 	fseek(outputVmlinux, ElfHeaderSize + hvReleaseData, SEEK_SET);
 	if (fread(inbuf, 0x40, 1, outputVmlinux) != 1) {
-		death("Could not read hvReleaseData\n", outputVmlinux, argv[4]);
+		death("Could not read hvReleaseData\n", outputVmlinux, out_name);
 	}
 	/* Check hvReleaseData sanity */
 	if (memcmp(inbuf, &eyeCatcher, 4) != 0) {
-		death("hvReleaseData is invalid\n", outputVmlinux, argv[4]);
+		death("hvReleaseData is invalid\n", outputVmlinux, out_name);
 	}
 	/* Get the naca pointer */
 	naca = ntohl(*((u_int32_t*) &inbuf[0x0C])) - KERNELBASE;
@@ -269,13 +280,13 @@ int main(int argc, char **argv)
 	/* fseek to the naca */
 	fseek(outputVmlinux, ElfHeaderSize + naca, SEEK_SET);
 	if (fread(inbuf, 0x18, 1, outputVmlinux) != 1) {
-		death("Could not read naca\n", outputVmlinux, argv[4]);
+		death("Could not read naca\n", outputVmlinux, out_name);
 	}
 	xRamDisk = ntohl(*((u_int32_t *) &inbuf[0x0c]));
 	xRamDiskSize = ntohl(*((u_int32_t *) &inbuf[0x14]));
 	/* Make sure a RAM disk isn't already present */
 	if ((xRamDisk != 0) || (xRamDiskSize != 0)) {
-		death("RAM disk is already attached to this kernel\n", outputVmlinux, argv[4]);
+		death("RAM disk is already attached to this kernel\n", outputVmlinux, out_name);
 	}
 	/* Fill in the values */
 	*((u_int32_t *) &inbuf[0x0c]) = htonl(ramStartOffs);
@@ -285,15 +296,15 @@ int main(int argc, char **argv)
 	fflush(outputVmlinux);
 	fseek(outputVmlinux, ElfHeaderSize + naca, SEEK_SET);
 	if (fwrite(inbuf, 0x18, 1, outputVmlinux) != 1) {
-		death("Could not write naca\n", outputVmlinux, argv[4]);
+		death("Could not write naca\n", outputVmlinux, out_name);
 	}
-	printf("Ram Disk of 0x%lx pages is attached to the kernel at offset 0x%08x\n",
+	printf("Ram Disk of 0x%lx pages is attached to the kernel at offset 0x%08lx\n",
 	       ramPages, ramStartOffs);
 
 	/* Done */
 	fclose(outputVmlinux);
 	/* Set permission to executable */
-	chmod(argv[4], S_IRUSR|S_IWUSR|S_IXUSR|S_IRGRP|S_IXGRP|S_IROTH|S_IXOTH);
+	chmod(out_name, S_IRUSR|S_IWUSR|S_IXUSR|S_IRGRP|S_IXGRP|S_IROTH|S_IXOTH);
 
 	return 0;
 }
diff --git a/arch/ppc64/boot/addnote.c b/arch/powerpc/boot/addnote.c
index 8041a9845ab7..8041a9845ab7 100644
--- a/arch/ppc64/boot/addnote.c
+++ b/arch/powerpc/boot/addnote.c
diff --git a/arch/powerpc/boot/crt0.S b/arch/powerpc/boot/crt0.S
new file mode 100644
index 000000000000..d2f2ace56cd3
--- /dev/null
+++ b/arch/powerpc/boot/crt0.S
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) Paul Mackerras 1997.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * NOTE: this code runs in 32 bit mode and is packaged as ELF32.
+ */
+
+#include "ppc_asm.h"
+
+	.text
+	.globl	_zimage_start
+_zimage_start:
+	bl	1f
+
+1:
+	mflr	r0
+	lis	r9,1b@ha
+	addi	r9,r9,1b@l
+	subf.	r0,r9,r0
+	beq	3f
+
+	lis	r9,__got2_start@ha
+	addi	r9,r9,__got2_start@l
+	lis	r8,__got2_end@ha
+	addi	r8,r8,__got2_end@l
+	subf.	r8,r9,r8
+	beq	3f
+	srwi.	r8,r8,2
+	mtctr	r8
+	add	r9,r0,r9
+2:
+	lwz	r8,0(r9)
+	add	r8,r8,r0
+	stw	r8,0(r9)
+	addi	r9,r9,4
+	bdnz	2b
+
+3:
+	lis	r9,_start@h
+	add	r9,r0,r9
+	lis	r8,_etext@ha
+	addi	r8,r8,_etext@l
+	add	r8,r0,r8
+4:	dcbf	r0,r9
+	icbi	r0,r9
+	addi	r9,r9,0x20
+	cmplwi	0,r9,8
+	blt	4b
+	sync
+	isync
+
+	mr	r6,r1
+	b	start
+
diff --git a/arch/ppc64/boot/div64.S b/arch/powerpc/boot/div64.S
index 722f360a32a9..722f360a32a9 100644
--- a/arch/ppc64/boot/div64.S
+++ b/arch/powerpc/boot/div64.S
diff --git a/arch/ppc64/boot/elf.h b/arch/powerpc/boot/elf.h
index d4828fcf1cb9..d4828fcf1cb9 100644
--- a/arch/ppc64/boot/elf.h
+++ b/arch/powerpc/boot/elf.h
diff --git a/arch/ppc64/boot/install.sh b/arch/powerpc/boot/install.sh
index cb2d6626b555..eacce9590816 100644
--- a/arch/ppc64/boot/install.sh
+++ b/arch/powerpc/boot/install.sh
@@ -28,7 +28,7 @@ if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}i
 # Default install
 
 # this should work for both the pSeries zImage and the iSeries vmlinux.sm
-image_name=`basename $5`
+image_name=`basename $2`
 
 if [ -f $4/$image_name ]; then
 	mv $4/$image_name $4/$image_name.old
diff --git a/arch/ppc64/boot/main.c b/arch/powerpc/boot/main.c
index f7ec19a2d0b0..64ec93116fa6 100644
--- a/arch/ppc64/boot/main.c
+++ b/arch/powerpc/boot/main.c
@@ -17,7 +17,6 @@
 #include "prom.h"
 #include "zlib.h"
 
-static void gunzip(void *, int, unsigned char *, int *);
 extern void flush_cache(void *, unsigned long);
 
 
@@ -26,31 +25,28 @@ extern void flush_cache(void *, unsigned long);
 #define RAM_END		(512<<20) // Fixme: use OF */
 #define	ONE_MB		0x100000
 
-static char *avail_ram;
-static char *begin_avail, *end_avail;
-static char *avail_high;
-static unsigned int heap_use;
-static unsigned int heap_max;
-
 extern char _start[];
+extern char __bss_start[];
 extern char _end[];
 extern char _vmlinux_start[];
 extern char _vmlinux_end[];
 extern char _initrd_start[];
 extern char _initrd_end[];
-extern unsigned long vmlinux_filesize;
-extern unsigned long vmlinux_memsize;
 
 struct addr_range {
 	unsigned long addr;
 	unsigned long size;
 	unsigned long memsize;
 };
-static struct addr_range vmlinux = {0, 0, 0};
-static struct addr_range vmlinuz = {0, 0, 0};
-static struct addr_range initrd  = {0, 0, 0};
+static struct addr_range vmlinux;
+static struct addr_range vmlinuz;
+static struct addr_range initrd;
+
+static unsigned long elfoffset;
+
+static char scratch[46912];	/* scratch space for gunzip, from zlib_inflate_workspacesize() */
+static char elfheader[256];
 
-static char scratch[128<<10];	/* 128kB of scratch space for gunzip */
 
 typedef void (*kernel_entry_t)( unsigned long,
                                 unsigned long,
@@ -62,6 +58,63 @@ typedef void (*kernel_entry_t)( unsigned long,
 
 static unsigned long claim_base;
 
+#define HEAD_CRC	2
+#define EXTRA_FIELD	4
+#define ORIG_NAME	8
+#define COMMENT		0x10
+#define RESERVED	0xe0
+
+static void gunzip(void *dst, int dstlen, unsigned char *src, int *lenp)
+{
+	z_stream s;
+	int r, i, flags;
+
+	/* skip header */
+	i = 10;
+	flags = src[3];
+	if (src[2] != Z_DEFLATED || (flags & RESERVED) != 0) {
+		printf("bad gzipped data\n\r");
+		exit();
+	}
+	if ((flags & EXTRA_FIELD) != 0)
+		i = 12 + src[10] + (src[11] << 8);
+	if ((flags & ORIG_NAME) != 0)
+		while (src[i++] != 0)
+			;
+	if ((flags & COMMENT) != 0)
+		while (src[i++] != 0)
+			;
+	if ((flags & HEAD_CRC) != 0)
+		i += 2;
+	if (i >= *lenp) {
+		printf("gunzip: ran out of data in header\n\r");
+		exit();
+	}
+
+	if (zlib_inflate_workspacesize() > sizeof(scratch)) {
+		printf("gunzip needs more mem\n");
+		exit();
+	}
+	memset(&s, 0, sizeof(s));
+	s.workspace = scratch;
+	r = zlib_inflateInit2(&s, -MAX_WBITS);
+	if (r != Z_OK) {
+		printf("inflateInit2 returned %d\n\r", r);
+		exit();
+	}
+	s.next_in = src + i;
+	s.avail_in = *lenp - i;
+	s.next_out = dst;
+	s.avail_out = dstlen;
+	r = zlib_inflate(&s, Z_FULL_FLUSH);
+	if (r != Z_OK && r != Z_STREAM_END) {
+		printf("inflate returned %d msg: %s\n\r", r, s.msg);
+		exit();
+	}
+	*lenp = s.next_out - (unsigned char *) dst;
+	zlib_inflateEnd(&s);
+}
+
 static unsigned long try_claim(unsigned long size)
 {
 	unsigned long addr = 0;
@@ -80,12 +133,72 @@ static unsigned long try_claim(unsigned long size)
 	return addr;
 }
 
-void start(unsigned long a1, unsigned long a2, void *promptr)
+static int is_elf64(void *hdr)
 {
-	unsigned long i;
-	kernel_entry_t kernel_entry;
-	Elf64_Ehdr *elf64;
+	Elf64_Ehdr *elf64 = hdr;
 	Elf64_Phdr *elf64ph;
+	unsigned int i;
+
+	if (!(elf64->e_ident[EI_MAG0]  == ELFMAG0	&&
+	      elf64->e_ident[EI_MAG1]  == ELFMAG1	&&
+	      elf64->e_ident[EI_MAG2]  == ELFMAG2	&&
+	      elf64->e_ident[EI_MAG3]  == ELFMAG3	&&
+	      elf64->e_ident[EI_CLASS] == ELFCLASS64	&&
+	      elf64->e_ident[EI_DATA]  == ELFDATA2MSB	&&
+	      elf64->e_type            == ET_EXEC	&&
+	      elf64->e_machine         == EM_PPC64))
+		return 0;
+
+	elf64ph = (Elf64_Phdr *)((unsigned long)elf64 +
+				 (unsigned long)elf64->e_phoff);
+	for (i = 0; i < (unsigned int)elf64->e_phnum; i++, elf64ph++)
+		if (elf64ph->p_type == PT_LOAD && elf64ph->p_offset != 0)
+			break;
+	if (i >= (unsigned int)elf64->e_phnum)
+		return 0;
+
+	elfoffset = (unsigned long)elf64ph->p_offset;
+	vmlinux.size = (unsigned long)elf64ph->p_filesz + elfoffset;
+	vmlinux.memsize = (unsigned long)elf64ph->p_memsz + elfoffset;
+	return 1;
+}
+
+static int is_elf32(void *hdr)
+{
+	Elf32_Ehdr *elf32 = hdr;
+	Elf32_Phdr *elf32ph;
+	unsigned int i;
+
+	if (!(elf32->e_ident[EI_MAG0]  == ELFMAG0	&&
+	      elf32->e_ident[EI_MAG1]  == ELFMAG1	&&
+	      elf32->e_ident[EI_MAG2]  == ELFMAG2	&&
+	      elf32->e_ident[EI_MAG3]  == ELFMAG3	&&
+	      elf32->e_ident[EI_CLASS] == ELFCLASS32	&&
+	      elf32->e_ident[EI_DATA]  == ELFDATA2MSB	&&
+	      elf32->e_type            == ET_EXEC	&&
+	      elf32->e_machine         == EM_PPC))
+		return 0;
+
+	elf32 = (Elf32_Ehdr *)elfheader;
+	elf32ph = (Elf32_Phdr *) ((unsigned long)elf32 + elf32->e_phoff);
+	for (i = 0; i < elf32->e_phnum; i++, elf32ph++)
+		if (elf32ph->p_type == PT_LOAD && elf32ph->p_offset != 0)
+			break;
+	if (i >= elf32->e_phnum)
+		return 0;
+
+	elfoffset = elf32ph->p_offset;
+	vmlinux.size = elf32ph->p_filesz + elf32ph->p_offset;
+	vmlinux.memsize = elf32ph->p_memsz + elf32ph->p_offset;
+	return 1;
+}
+
+void start(unsigned long a1, unsigned long a2, void *promptr, void *sp)
+{
+	int len;
+	kernel_entry_t kernel_entry;
+
+	memset(__bss_start, 0, _end - __bss_start);
 
 	prom = (int (*)(void *)) promptr;
 	chosen_handle = finddevice("/chosen");
@@ -97,7 +210,23 @@ void start(unsigned long a1, unsigned long a2, void *promptr)
 	if (getprop(chosen_handle, "stdin", &stdin, sizeof(stdin)) != 4)
 		exit();
 
-	printf("\n\rzImage starting: loaded at 0x%lx\n\r", (unsigned long) _start);
+	printf("\n\rzImage starting: loaded at 0x%p (sp: 0x%p)\n\r", _start, sp);
+
+	vmlinuz.addr = (unsigned long)_vmlinux_start;
+	vmlinuz.size = (unsigned long)(_vmlinux_end - _vmlinux_start);
+
+	/* gunzip the ELF header of the kernel */
+	if (*(unsigned short *)vmlinuz.addr == 0x1f8b) {
+		len = vmlinuz.size;
+		gunzip(elfheader, sizeof(elfheader),
+				(unsigned char *)vmlinuz.addr, &len);
+	} else
+		memcpy(elfheader, (const void *)vmlinuz.addr, sizeof(elfheader));
+
+	if (!is_elf64(elfheader) && !is_elf32(elfheader)) {
+		printf("Error: not a valid PPC32 or PPC64 ELF file!\n\r");
+		exit();
+	}
 
 	/*
 	 * The first available claim_base must be above the end of the
@@ -118,25 +247,17 @@ void start(unsigned long a1, unsigned long a2, void *promptr)
 		claim_base = PROG_START;
 #endif
 
-	/*
-	 * Now we try to claim some memory for the kernel itself
-	 * our "vmlinux_memsize" is the memory footprint in RAM, _HOWEVER_, what
-	 * our Makefile stuffs in is an image containing all sort of junk including
-	 * an ELF header. We need to do some calculations here to find the right
-	 * size... In practice we add 1Mb, that is enough, but we should really
-	 * consider fixing the Makefile to put a _raw_ kernel in there !
+	/* We need to claim the memsize plus the file offset since gzip
+	 * will expand the header (file offset), then the kernel, then
+	 * possible rubbish we don't care about. But the kernel bss must
+	 * be claimed (it will be zero'd by the kernel itself)
 	 */
-	vmlinux_memsize += ONE_MB;
-	printf("Allocating 0x%lx bytes for kernel ...\n\r", vmlinux_memsize);
-	vmlinux.addr = try_claim(vmlinux_memsize);
+	printf("Allocating 0x%lx bytes for kernel ...\n\r", vmlinux.memsize);
+	vmlinux.addr = try_claim(vmlinux.memsize);
 	if (vmlinux.addr == 0) {
 		printf("Can't allocate memory for kernel image !\n\r");
 		exit();
 	}
-	vmlinuz.addr = (unsigned long)_vmlinux_start;
-	vmlinuz.size = (unsigned long)(_vmlinux_end - _vmlinux_start);
-	vmlinux.size = PAGE_ALIGN(vmlinux_filesize);
-	vmlinux.memsize = vmlinux_memsize;
 
 	/*
 	 * Now we try to claim memory for the initrd (and copy it there)
@@ -160,49 +281,22 @@ void start(unsigned long a1, unsigned long a2, void *promptr)
 
 	/* Eventually gunzip the kernel */
 	if (*(unsigned short *)vmlinuz.addr == 0x1f8b) {
-		int len;
-		avail_ram = scratch;
-		begin_avail = avail_high = avail_ram;
-		end_avail = scratch + sizeof(scratch);
 		printf("gunzipping (0x%lx <- 0x%lx:0x%0lx)...",
 		       vmlinux.addr, vmlinuz.addr, vmlinuz.addr+vmlinuz.size);
 		len = vmlinuz.size;
-		gunzip((void *)vmlinux.addr, vmlinux.size,
+		gunzip((void *)vmlinux.addr, vmlinux.memsize,
 			(unsigned char *)vmlinuz.addr, &len);
 		printf("done 0x%lx bytes\n\r", len);
-		printf("0x%x bytes of heap consumed, max in use 0x%x\n\r",
-		       (unsigned)(avail_high - begin_avail), heap_max);
 	} else {
 		memmove((void *)vmlinux.addr,(void *)vmlinuz.addr,vmlinuz.size);
 	}
 
 	/* Skip over the ELF header */
-	elf64 = (Elf64_Ehdr *)vmlinux.addr;
-	if ( elf64->e_ident[EI_MAG0]  != ELFMAG0	||
-	     elf64->e_ident[EI_MAG1]  != ELFMAG1	||
-	     elf64->e_ident[EI_MAG2]  != ELFMAG2	||
-	     elf64->e_ident[EI_MAG3]  != ELFMAG3	||
-	     elf64->e_ident[EI_CLASS] != ELFCLASS64	||
-	     elf64->e_ident[EI_DATA]  != ELFDATA2MSB	||
-	     elf64->e_type            != ET_EXEC	||
-	     elf64->e_machine         != EM_PPC64 )
-	{
-		printf("Error: not a valid PPC64 ELF file!\n\r");
-		exit();
-	}
-
-	elf64ph = (Elf64_Phdr *)((unsigned long)elf64 +
-				(unsigned long)elf64->e_phoff);
-	for(i=0; i < (unsigned int)elf64->e_phnum ;i++,elf64ph++) {
-		if (elf64ph->p_type == PT_LOAD && elf64ph->p_offset != 0)
-			break;
-	}
 #ifdef DEBUG
 	printf("... skipping 0x%lx bytes of ELF header\n\r",
-			(unsigned long)elf64ph->p_offset);
+			elfoffset);
 #endif
-	vmlinux.addr += (unsigned long)elf64ph->p_offset;
-	vmlinux.size -= (unsigned long)elf64ph->p_offset;
+	vmlinux.addr += elfoffset;
 
 	flush_cache((void *)vmlinux.addr, vmlinux.size);
 
@@ -218,115 +312,10 @@ void start(unsigned long a1, unsigned long a2, void *promptr)
 		(unsigned long)prom, NULL);
 #endif
 
-	kernel_entry( a1, a2, prom, NULL );
+	kernel_entry(a1, a2, prom, NULL);
 
 	printf("Error: Linux kernel returned to zImage bootloader!\n\r");
 
 	exit();
 }
 
-struct memchunk {
-	unsigned int size;
-	unsigned int pad;
-	struct memchunk *next;
-};
-
-static struct memchunk *freechunks;
-
-void *zalloc(void *x, unsigned items, unsigned size)
-{
-	void *p;
-	struct memchunk **mpp, *mp;
-
-	size *= items;
-	size = _ALIGN(size, sizeof(struct memchunk));
-	heap_use += size;
-	if (heap_use > heap_max)
-		heap_max = heap_use;
-	for (mpp = &freechunks; (mp = *mpp) != 0; mpp = &mp->next) {
-		if (mp->size == size) {
-			*mpp = mp->next;
-			return mp;
-		}
-	}
-	p = avail_ram;
-	avail_ram += size;
-	if (avail_ram > avail_high)
-		avail_high = avail_ram;
-	if (avail_ram > end_avail) {
-		printf("oops... out of memory\n\r");
-		pause();
-	}
-	return p;
-}
-
-void zfree(void *x, void *addr, unsigned nb)
-{
-	struct memchunk *mp = addr;
-
-	nb = _ALIGN(nb, sizeof(struct memchunk));
-	heap_use -= nb;
-	if (avail_ram == addr + nb) {
-		avail_ram = addr;
-		return;
-	}
-	mp->size = nb;
-	mp->next = freechunks;
-	freechunks = mp;
-}
-
-#define HEAD_CRC	2
-#define EXTRA_FIELD	4
-#define ORIG_NAME	8
-#define COMMENT		0x10
-#define RESERVED	0xe0
-
-#define DEFLATED	8
-
-static void gunzip(void *dst, int dstlen, unsigned char *src, int *lenp)
-{
-	z_stream s;
-	int r, i, flags;
-
-	/* skip header */
-	i = 10;
-	flags = src[3];
-	if (src[2] != DEFLATED || (flags & RESERVED) != 0) {
-		printf("bad gzipped data\n\r");
-		exit();
-	}
-	if ((flags & EXTRA_FIELD) != 0)
-		i = 12 + src[10] + (src[11] << 8);
-	if ((flags & ORIG_NAME) != 0)
-		while (src[i++] != 0)
-			;
-	if ((flags & COMMENT) != 0)
-		while (src[i++] != 0)
-			;
-	if ((flags & HEAD_CRC) != 0)
-		i += 2;
-	if (i >= *lenp) {
-		printf("gunzip: ran out of data in header\n\r");
-		exit();
-	}
-
-	s.zalloc = zalloc;
-	s.zfree = zfree;
-	r = inflateInit2(&s, -MAX_WBITS);
-	if (r != Z_OK) {
-		printf("inflateInit2 returned %d\n\r", r);
-		exit();
-	}
-	s.next_in = src + i;
-	s.avail_in = *lenp - i;
-	s.next_out = dst;
-	s.avail_out = dstlen;
-	r = inflate(&s, Z_FINISH);
-	if (r != Z_OK && r != Z_STREAM_END) {
-		printf("inflate returned %d msg: %s\n\r", r, s.msg);
-		exit();
-	}
-	*lenp = s.next_out - (unsigned char *) dst;
-	inflateEnd(&s);
-}
-
diff --git a/arch/ppc64/boot/page.h b/arch/powerpc/boot/page.h
index 14eca30fef64..14eca30fef64 100644
--- a/arch/ppc64/boot/page.h
+++ b/arch/powerpc/boot/page.h
diff --git a/arch/ppc64/boot/ppc_asm.h b/arch/powerpc/boot/ppc_asm.h
index 1c2c2817f9b7..1c2c2817f9b7 100644
--- a/arch/ppc64/boot/ppc_asm.h
+++ b/arch/powerpc/boot/ppc_asm.h
diff --git a/arch/ppc64/boot/prom.c b/arch/powerpc/boot/prom.c
index 4bea2f4dcb06..4bea2f4dcb06 100644
--- a/arch/ppc64/boot/prom.c
+++ b/arch/powerpc/boot/prom.c
diff --git a/arch/ppc64/boot/prom.h b/arch/powerpc/boot/prom.h
index 96ab5aec740c..96ab5aec740c 100644
--- a/arch/ppc64/boot/prom.h
+++ b/arch/powerpc/boot/prom.h
diff --git a/arch/ppc64/boot/stdio.h b/arch/powerpc/boot/stdio.h
index 24bd3a8dee94..24bd3a8dee94 100644
--- a/arch/ppc64/boot/stdio.h
+++ b/arch/powerpc/boot/stdio.h
diff --git a/arch/ppc64/boot/string.S b/arch/powerpc/boot/string.S
index 7ade87ae7718..b1eeaed7db17 100644
--- a/arch/ppc64/boot/string.S
+++ b/arch/powerpc/boot/string.S
@@ -104,7 +104,7 @@ memmove:
 
 	.globl	memcpy
 memcpy:
-	rlwinm.	r7,r5,32-3,3,31		/* r0 = r5 >> 3 */
+	rlwinm.	r7,r5,32-3,3,31		/* r7 = r5 >> 3 */
 	addi	r6,r3,-4
 	addi	r4,r4,-4
 	beq	2f			/* if less than 8 bytes to do */
@@ -146,7 +146,7 @@ memcpy:
 
 	.globl	backwards_memcpy
 backwards_memcpy:
-	rlwinm.	r7,r5,32-3,3,31		/* r0 = r5 >> 3 */
+	rlwinm.	r7,r5,32-3,3,31		/* r7 = r5 >> 3 */
 	add	r6,r3,r5
 	add	r4,r4,r5
 	beq	2f
diff --git a/arch/ppc64/boot/string.h b/arch/powerpc/boot/string.h
index 9289258bcbd6..9fdff1cc0d70 100644
--- a/arch/ppc64/boot/string.h
+++ b/arch/powerpc/boot/string.h
@@ -1,5 +1,6 @@
 #ifndef _PPC_BOOT_STRING_H_
 #define _PPC_BOOT_STRING_H_
+#include <stddef.h>
 
 extern char *strcpy(char *dest, const char *src);
 extern char *strncpy(char *dest, const char *src, size_t n);
diff --git a/arch/powerpc/boot/zImage.lds b/arch/powerpc/boot/zImage.lds
new file mode 100644
index 000000000000..4b6bb3ffe3dc
--- /dev/null
+++ b/arch/powerpc/boot/zImage.lds
@@ -0,0 +1,46 @@
+OUTPUT_ARCH(powerpc:common)
+ENTRY(_zimage_start)
+SECTIONS
+{
+  . = (4*1024*1024);
+  _start = .;
+  .text      :
+  {
+    *(.text)
+    *(.fixup)
+  }
+  _etext = .;
+  . = ALIGN(4096);
+  .data    :
+  {
+    *(.rodata*)
+    *(.data*)
+    *(.sdata*)
+    __got2_start = .;
+    *(.got2)
+    __got2_end = .;
+  }
+
+  . = ALIGN(4096);
+  _vmlinux_start =  .;
+  .kernel:vmlinux.strip : { *(.kernel:vmlinux.strip) }
+  _vmlinux_end =  .;
+
+  . = ALIGN(4096);
+  _initrd_start =  .;
+  .kernel:initrd : { *(.kernel:initrd) }
+  _initrd_end =  .;
+
+  . = ALIGN(4096);
+  _edata  =  .;
+
+  . = ALIGN(4096);
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss)
+   *(.bss)
+  }
+  . = ALIGN(4096);
+  _end = . ;
+}
diff --git a/arch/ppc64/configs/bpa_defconfig b/arch/powerpc/configs/cell_defconfig
index 46c5da41c3ae..4b433411b9e3 100644
--- a/arch/ppc64/configs/bpa_defconfig
+++ b/arch/powerpc/configs/cell_defconfig
@@ -1,18 +1,33 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc6
-# Mon Aug  8 14:12:19 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 14:36:20 2005
 #
+CONFIG_PPC64=y
 CONFIG_64BIT=y
+CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_FORCE_MAX_ZONEORDER=13
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+
+#
+# Processor support
+#
+# CONFIG_POWER4_ONLY is not set
+CONFIG_POWER3=y
+CONFIG_POWER4=y
+CONFIG_PPC_FPU=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
 
 #
 # Code maturity level options
@@ -26,6 +41,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
@@ -36,6 +52,7 @@ CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 # CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
@@ -64,63 +81,94 @@ CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 # CONFIG_KMOD is not set
 CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
 
 #
 # Platform support
 #
-# CONFIG_PPC_ISERIES is not set
 CONFIG_PPC_MULTIPLATFORM=y
+# CONFIG_PPC_ISERIES is not set
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_APUS is not set
 # CONFIG_PPC_PSERIES is not set
-CONFIG_PPC_BPA=y
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
-CONFIG_PPC=y
-CONFIG_PPC64=y
+CONFIG_PPC_CELL=y
 CONFIG_PPC_OF=y
-CONFIG_BPA_IIC=y
-CONFIG_ALTIVEC=y
-CONFIG_KEXEC=y
 # CONFIG_U3_DART is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_POWER4_ONLY is not set
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
+CONFIG_RTAS_FLASH=y
+CONFIG_MMIO_NVRAM=y
+CONFIG_CELL_IIC=y
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Kernel options
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_BKL=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
 # CONFIG_IOMMU_VMERGE is not set
-CONFIG_SMP=y
-CONFIG_NR_CPUS=4
+CONFIG_KEXEC=y
+CONFIG_IRQ_ALL_CPUS=y
+# CONFIG_NUMA is not set
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_NUMA is not set
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_SCHED_SMT=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_PPC_RTAS=y
-CONFIG_RTAS_PROC=y
-CONFIG_RTAS_FLASH=y
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
 #
-# General setup
+# Bus options
 #
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -132,8 +180,7 @@ CONFIG_PCI_NAMES=y
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
+CONFIG_KERNEL_START=0xc000000000000000
 
 #
 # Networking
@@ -163,8 +210,8 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-CONFIG_IP_TCPDIAG_IPV6=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 
@@ -183,16 +230,24 @@ CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
 #
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
 # IP: Netfilter Configuration
 #
 CONFIG_IP_NF_CONNTRACK=y
 # CONFIG_IP_NF_CT_ACCT is not set
 # CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
 CONFIG_IP_NF_CT_PROTO_SCTP=y
 CONFIG_IP_NF_FTP=m
 CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_LIMIT=m
@@ -216,13 +271,16 @@ CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_REALM=m
 CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
 CONFIG_IP_NF_MATCH_COMMENT=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -240,6 +298,7 @@ CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_DSCP=m
 CONFIG_IP_NF_TARGET_MARK=m
 CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
@@ -251,6 +310,12 @@ CONFIG_IP_NF_ARP_MANGLE=m
 #
 # CONFIG_IP6_NF_QUEUE is not set
 # CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
 
 #
 # SCTP Configuration (EXPERIMENTAL)
@@ -268,6 +333,10 @@ CONFIG_IP_NF_ARP_MANGLE=m
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -278,6 +347,7 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -292,6 +362,11 @@ CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -322,16 +397,7 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=131072
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -395,6 +461,7 @@ CONFIG_IDEDMA_AUTO=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 
 #
@@ -420,6 +487,7 @@ CONFIG_IDEDMA_AUTO=y
 #
 # Macintosh device drivers
 #
+# CONFIG_WINDFARM is not set
 
 #
 # Network device support
@@ -436,12 +504,18 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -462,6 +536,7 @@ CONFIG_E1000=m
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 CONFIG_SKGE=m
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
@@ -471,6 +546,7 @@ CONFIG_SKGE=m
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -552,6 +628,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_ROCKETPORT is not set
 # CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINK is not set
@@ -593,7 +670,7 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_WATCHDOG_RTAS=y
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -601,6 +678,8 @@ CONFIG_WATCHDOG_RTAS=y
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
 # CONFIG_RTC is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -617,6 +696,7 @@ CONFIG_WATCHDOG_RTAS=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -642,7 +722,6 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
@@ -656,7 +735,6 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_SENSOR is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -669,6 +747,7 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -683,12 +762,17 @@ CONFIG_I2C_ALGOBIT=y
 # Hardware Monitoring support
 #
 # CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
 
 #
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -722,6 +806,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
 #
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
@@ -756,10 +844,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -768,6 +852,7 @@ CONFIG_INOTIFY=y
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -794,13 +879,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-# CONFIG_TMPFS_SECURITY is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -846,6 +929,7 @@ CONFIG_SUNRPC=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -912,9 +996,24 @@ CONFIG_NLS_ISO8859_15=m
 # CONFIG_NLS_UTF8 is not set
 
 #
-# Profiling support
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+
+#
+# Instrumentation Support
 #
 # CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
 
 #
 # Kernel hacking
@@ -923,6 +1022,7 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=15
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -930,13 +1030,14 @@ CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_KPROBES is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUGGER=y
 # CONFIG_XMON is not set
-# CONFIG_PPCDBG is not set
 CONFIG_IRQSTACKS=y
+# CONFIG_BOOTX_TEXT is not set
 
 #
 # Security options
@@ -976,12 +1077,3 @@ CONFIG_CRYPTO_DEFLATE=m
 #
 # Hardware crypto devices
 #
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/ppc64/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index fc83d9330282..e7c23e3902b8 100644
--- a/arch/ppc64/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -1,18 +1,32 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc6
-# Mon Aug  8 14:16:59 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 14:39:20 2005
 #
+CONFIG_PPC64=y
 CONFIG_64BIT=y
+CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_FORCE_MAX_ZONEORDER=13
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+
+#
+# Processor support
+#
+CONFIG_POWER4_ONLY=y
+CONFIG_POWER4=y
+CONFIG_PPC_FPU=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
 
 #
 # Code maturity level options
@@ -26,6 +40,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -37,6 +52,7 @@ CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
@@ -65,63 +81,106 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
 
 #
 # Platform support
 #
-# CONFIG_PPC_ISERIES is not set
 CONFIG_PPC_MULTIPLATFORM=y
+# CONFIG_PPC_ISERIES is not set
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_APUS is not set
 # CONFIG_PPC_PSERIES is not set
-# CONFIG_PPC_BPA is not set
 CONFIG_PPC_PMAC=y
+CONFIG_PPC_PMAC64=y
 # CONFIG_PPC_MAPLE is not set
-CONFIG_PPC=y
-CONFIG_PPC64=y
+# CONFIG_PPC_CELL is not set
 CONFIG_PPC_OF=y
-CONFIG_MPIC=y
-CONFIG_ALTIVEC=y
-CONFIG_KEXEC=y
 CONFIG_U3_DART=y
-CONFIG_PPC_PMAC64=y
-CONFIG_BOOTX_TEXT=y
-CONFIG_POWER4_ONLY=y
+CONFIG_MPIC=y
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+CONFIG_GENERIC_TBSYNC=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_PMAC64=y
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Kernel options
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_PREEMPT_BKL is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_IOMMU_VMERGE=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_KEXEC=y
+CONFIG_IRQ_ALL_CPUS=y
+# CONFIG_NUMA is not set
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_NUMA is not set
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PPC_64K_PAGES is not set
 # CONFIG_SCHED_SMT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_GENERIC_HARDIRQS=y
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
 #
-# General setup
+# Bus options
 #
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 # CONFIG_PCI_DEBUG is not set
-# CONFIG_HOTPLUG_CPU is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -132,8 +191,7 @@ CONFIG_PCI_NAMES=y
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
+CONFIG_KERNEL_START=0xc000000000000000
 
 #
 # Networking
@@ -163,8 +221,8 @@ CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 
@@ -177,16 +235,24 @@ CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
 #
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
 # IP: Netfilter Configuration
 #
 CONFIG_IP_NF_CONNTRACK=m
 CONFIG_IP_NF_CT_ACCT=y
 CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
 CONFIG_IP_NF_CT_PROTO_SCTP=m
 CONFIG_IP_NF_FTP=m
 CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_LIMIT=m
@@ -210,14 +276,18 @@ CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_REALM=m
 CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
 CONFIG_IP_NF_MATCH_COMMENT=m
 CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -235,6 +305,7 @@ CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_DSCP=m
 CONFIG_IP_NF_TARGET_MARK=m
 CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_TARGET_CONNMARK=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
@@ -244,6 +315,11 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
@@ -260,6 +336,10 @@ CONFIG_LLC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -270,6 +350,7 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -284,6 +365,11 @@ CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -315,18 +401,9 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -395,6 +472,7 @@ CONFIG_IDEDMA_AUTO=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -422,10 +500,12 @@ CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
 #
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -435,15 +515,19 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 CONFIG_SCSI_SATA=y
 # CONFIG_SCSI_SATA_AHCI is not set
 CONFIG_SCSI_SATA_SVW=y
 # CONFIG_SCSI_ATA_PIIX is not set
+# CONFIG_SCSI_SATA_MV is not set
 # CONFIG_SCSI_SATA_NV is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_PDC_ADMA is not set
 # CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
 # CONFIG_SCSI_SATA_SX4 is not set
 # CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIL24 is not set
 # CONFIG_SCSI_SATA_SIS is not set
 # CONFIG_SCSI_SATA_ULI is not set
 # CONFIG_SCSI_SATA_VIA is not set
@@ -498,6 +582,7 @@ CONFIG_DM_ZERO=m
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -540,8 +625,10 @@ CONFIG_IEEE1394_RAWIO=y
 #
 CONFIG_ADB_PMU=y
 CONFIG_PMAC_SMU=y
-# CONFIG_PMAC_BACKLIGHT is not set
 CONFIG_THERM_PM72=y
+CONFIG_WINDFARM=y
+CONFIG_WINDFARM_PM81=y
+CONFIG_WINDFARM_PM91=y
 
 #
 # Network device support
@@ -558,12 +645,18 @@ CONFIG_TUN=m
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 CONFIG_SUNGEM=y
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -585,6 +678,7 @@ CONFIG_E1000=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 CONFIG_TIGON3=m
@@ -594,6 +688,7 @@ CONFIG_TIGON3=m
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -623,6 +718,7 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
@@ -717,6 +813,8 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_WATCHDOG is not set
 # CONFIG_RTC is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -735,6 +833,7 @@ CONFIG_MAX_RAW_DEVS=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -760,8 +859,8 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
 CONFIG_I2C_KEYWEST=y
+CONFIG_I2C_PMAC_SMU=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
@@ -775,7 +874,6 @@ CONFIG_I2C_KEYWEST=y
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_SENSOR is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -788,6 +886,7 @@ CONFIG_I2C_KEYWEST=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -802,12 +901,17 @@ CONFIG_I2C_KEYWEST=y
 # Hardware Monitoring support
 #
 # CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
 
 #
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -824,7 +928,6 @@ CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
 CONFIG_FB_MACMODES=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
@@ -839,10 +942,10 @@ CONFIG_FB_OF=y
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
 # CONFIG_FB_VGA16 is not set
-# CONFIG_FB_NVIDIA is not set
-CONFIG_FB_RIVA=y
-# CONFIG_FB_RIVA_I2C is not set
-# CONFIG_FB_RIVA_DEBUG is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_NVIDIA=y
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
 # CONFIG_FB_RADEON_OLD is not set
 CONFIG_FB_RADEON=y
@@ -856,8 +959,8 @@ CONFIG_FB_RADEON_I2C=y
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -866,6 +969,7 @@ CONFIG_FB_RADEON_I2C=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
@@ -886,7 +990,96 @@ CONFIG_LCD_DEVICE=y
 #
 # Sound
 #
-# CONFIG_SOUND is not set
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_GENERIC_DRIVER=y
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# PCI devices
+#
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
+
+#
+# ALSA PowerMac devices
+#
+CONFIG_SND_POWERMAC=m
+CONFIG_SND_POWERMAC_AUTO_DRC=y
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=m
+# CONFIG_SND_USB_USX2Y is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
 
 #
 # USB support
@@ -920,12 +1113,16 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=y
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -937,6 +1134,7 @@ CONFIG_USB_STORAGE_DPCM=y
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 
 #
 # USB Input Devices
@@ -956,9 +1154,11 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_MTOUCH is not set
 # CONFIG_USB_ITMTOUCH is not set
 # CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
 
 #
 # USB Imaging devices
@@ -983,30 +1183,14 @@ CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
 CONFIG_USB_USBNET=m
-
-#
-# USB Host-to-Host Cables
-#
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_GENESYS=y
-CONFIG_USB_NET1080=y
-CONFIG_USB_PL2301=y
-CONFIG_USB_KC2190=y
-
-#
-# Intelligent USB Devices/Gadgets
-#
-CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_ZAURUS=y
-CONFIG_USB_CDCETHER=y
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_AX8817X=y
+# CONFIG_USB_NET_AX8817X is not set
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_GL620A is not set
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_ZAURUS is not set
 CONFIG_USB_MON=y
 
 #
@@ -1049,6 +1233,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
 CONFIG_USB_SERIAL_KLSI=m
 CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_NOKIA_DKU2 is not set
 CONFIG_USB_SERIAL_PL2303=m
 # CONFIG_USB_SERIAL_HP4X is not set
 CONFIG_USB_SERIAL_SAFE=m
@@ -1124,16 +1309,12 @@ CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
 CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -1141,6 +1322,7 @@ CONFIG_INOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -1168,14 +1350,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-CONFIG_DEVPTS_FS_XATTR=y
-# CONFIG_DEVPTS_FS_SECURITY is not set
 CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1225,6 +1404,7 @@ CONFIG_CIFS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1291,10 +1471,25 @@ CONFIG_NLS_ISO8859_15=y
 CONFIG_NLS_UTF8=y
 
 #
-# Profiling support
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+
+#
+# Instrumentation Support
 #
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
+# CONFIG_KPROBES is not set
 
 #
 # Kernel hacking
@@ -1303,6 +1498,7 @@ CONFIG_OPROFILE=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=17
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1310,12 +1506,13 @@ CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_KPROBES is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUGGER is not set
-# CONFIG_PPCDBG is not set
 CONFIG_IRQSTACKS=y
+CONFIG_BOOTX_TEXT=y
 
 #
 # Security options
@@ -1355,12 +1552,3 @@ CONFIG_CRYPTO_TEST=m
 #
 # Hardware crypto devices
 #
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/ppc64/configs/iSeries_defconfig b/arch/powerpc/configs/iseries_defconfig
index 013d4e0e4003..5d0866707a75 100644
--- a/arch/ppc64/configs/iSeries_defconfig
+++ b/arch/powerpc/configs/iseries_defconfig
@@ -1,18 +1,33 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc6
-# Mon Aug  8 14:17:02 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 14:38:09 2005
 #
+CONFIG_PPC64=y
 CONFIG_64BIT=y
+CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_FORCE_MAX_ZONEORDER=13
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+
+#
+# Processor support
+#
+# CONFIG_POWER4_ONLY is not set
+CONFIG_POWER3=y
+CONFIG_POWER4=y
+CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=32
 
 #
 # Code maturity level options
@@ -26,6 +41,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -38,6 +54,7 @@ CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
@@ -66,52 +83,84 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
 
 #
 # Platform support
 #
-CONFIG_PPC_ISERIES=y
 # CONFIG_PPC_MULTIPLATFORM is not set
-CONFIG_PPC=y
-CONFIG_PPC64=y
+CONFIG_PPC_ISERIES=y
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_APUS is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
 CONFIG_IBMVIO=y
-# CONFIG_POWER4_ONLY is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Kernel options
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_PREEMPT_BKL is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_IOMMU_VMERGE=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=32
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_LPARCFG=y
+# CONFIG_NUMA is not set
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_NUMA is not set
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PPC_64K_PAGES is not set
 # CONFIG_SCHED_SMT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_LPARCFG=y
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
 #
-# General setup
+# Bus options
 #
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -123,6 +172,7 @@ CONFIG_PCI_NAMES=y
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
+CONFIG_KERNEL_START=0xc000000000000000
 
 #
 # Networking
@@ -152,8 +202,8 @@ CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 
@@ -166,16 +216,24 @@ CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
 #
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
 # IP: Netfilter Configuration
 #
 CONFIG_IP_NF_CONNTRACK=m
 CONFIG_IP_NF_CT_ACCT=y
 CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
 CONFIG_IP_NF_CT_PROTO_SCTP=m
 CONFIG_IP_NF_FTP=m
 CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_LIMIT=m
@@ -199,14 +257,18 @@ CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_REALM=m
 CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
 CONFIG_IP_NF_MATCH_COMMENT=m
 CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -224,6 +286,7 @@ CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_DSCP=m
 CONFIG_IP_NF_TARGET_MARK=m
 CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_TARGET_CONNMARK=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
@@ -233,6 +296,11 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
@@ -249,6 +317,10 @@ CONFIG_LLC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -259,6 +331,7 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -273,6 +346,11 @@ CONFIG_FW_LOADER=m
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -303,16 +381,7 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -323,6 +392,7 @@ CONFIG_IOSCHED_CFQ=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -350,10 +420,12 @@ CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
 #
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -363,6 +435,7 @@ CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
@@ -415,6 +488,7 @@ CONFIG_DM_ZERO=m
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -429,6 +503,7 @@ CONFIG_DM_ZERO=m
 #
 # Macintosh device drivers
 #
+# CONFIG_WINDFARM is not set
 
 #
 # Network device support
@@ -445,12 +520,18 @@ CONFIG_TUN=m
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -489,6 +570,7 @@ CONFIG_E1000=m
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
@@ -498,6 +580,7 @@ CONFIG_E1000=m
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -528,6 +611,7 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
@@ -610,6 +694,8 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_WATCHDOG is not set
 # CONFIG_RTC is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -627,12 +713,12 @@ CONFIG_MAX_RAW_DEVS=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
 #
 # CONFIG_I2C is not set
-# CONFIG_I2C_SENSOR is not set
 
 #
 # Dallas's 1-wire bus
@@ -643,12 +729,17 @@ CONFIG_MAX_RAW_DEVS=256
 # Hardware Monitoring support
 #
 # CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
 
 #
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -676,6 +767,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
 #
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
@@ -722,16 +817,12 @@ CONFIG_JFS_SECURITY=y
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
 CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -739,6 +830,7 @@ CONFIG_INOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -766,14 +858,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -824,6 +913,7 @@ CONFIG_CIFS_POSIX=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -885,10 +975,25 @@ CONFIG_VIOTAPE=m
 CONFIG_VIOPATH=y
 
 #
-# Profiling support
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+
+#
+# Instrumentation Support
 #
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
+# CONFIG_KPROBES is not set
 
 #
 # Kernel hacking
@@ -897,6 +1002,7 @@ CONFIG_OPROFILE=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=17
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -904,11 +1010,11 @@ CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_KPROBES is not set
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUGGER is not set
-# CONFIG_PPCDBG is not set
 CONFIG_IRQSTACKS=y
 
 #
@@ -949,12 +1055,3 @@ CONFIG_CRYPTO_TEST=m
 #
 # Hardware crypto devices
 #
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/ppc64/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig
index dd42892cd873..92e42613ef06 100644
--- a/arch/ppc64/configs/maple_defconfig
+++ b/arch/powerpc/configs/maple_defconfig
@@ -1,18 +1,32 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc6
-# Mon Aug  8 14:17:04 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 14:38:58 2005
 #
+CONFIG_PPC64=y
 CONFIG_64BIT=y
+CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_FORCE_MAX_ZONEORDER=13
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+
+#
+# Processor support
+#
+CONFIG_POWER4_ONLY=y
+CONFIG_POWER4=y
+CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
 
 #
 # Code maturity level options
@@ -26,6 +40,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -37,6 +52,7 @@ CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
@@ -65,61 +81,92 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
 
 #
 # Platform support
 #
-# CONFIG_PPC_ISERIES is not set
 CONFIG_PPC_MULTIPLATFORM=y
+# CONFIG_PPC_ISERIES is not set
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_APUS is not set
 # CONFIG_PPC_PSERIES is not set
-# CONFIG_PPC_BPA is not set
 # CONFIG_PPC_PMAC is not set
 CONFIG_PPC_MAPLE=y
-CONFIG_PPC=y
-CONFIG_PPC64=y
+# CONFIG_PPC_CELL is not set
 CONFIG_PPC_OF=y
-CONFIG_MPIC=y
-# CONFIG_ALTIVEC is not set
-CONFIG_KEXEC=y
 CONFIG_U3_DART=y
+CONFIG_MPIC=y
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
 CONFIG_MPIC_BROKEN_U3=y
-CONFIG_BOOTX_TEXT=y
-CONFIG_POWER4_ONLY=y
+# CONFIG_PPC_MPC106 is not set
+CONFIG_GENERIC_TBSYNC=y
+# CONFIG_CPU_FREQ is not set
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Kernel options
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_PREEMPT_BKL is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_IOMMU_VMERGE=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
+CONFIG_KEXEC=y
+CONFIG_IRQ_ALL_CPUS=y
+# CONFIG_NUMA is not set
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_NUMA is not set
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PPC_64K_PAGES is not set
 # CONFIG_SCHED_SMT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_GENERIC_HARDIRQS=y
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
 #
-# General setup
+# Bus options
 #
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -131,8 +178,7 @@ CONFIG_PCI_NAMES=y
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
+CONFIG_KERNEL_START=0xc000000000000000
 
 #
 # Networking
@@ -163,14 +209,19 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
 #
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
@@ -186,6 +237,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -196,6 +251,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -210,6 +266,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -240,16 +301,7 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
 # CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -313,6 +365,7 @@ CONFIG_IDEDMA_AUTO=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 
 #
@@ -338,6 +391,7 @@ CONFIG_IDEDMA_AUTO=y
 #
 # Macintosh device drivers
 #
+# CONFIG_WINDFARM is not set
 
 #
 # Network device support
@@ -354,12 +408,18 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -398,6 +458,7 @@ CONFIG_E1000=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
@@ -408,6 +469,7 @@ CONFIG_E1000=y
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -512,6 +574,8 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_WATCHDOG is not set
 # CONFIG_RTC is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -528,6 +592,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -553,7 +618,6 @@ CONFIG_I2C_AMD8111=y
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
@@ -567,7 +631,6 @@ CONFIG_I2C_AMD8111=y
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_SENSOR is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -580,6 +643,7 @@ CONFIG_I2C_AMD8111=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -594,12 +658,17 @@ CONFIG_I2C_AMD8111=y
 # Hardware Monitoring support
 #
 # CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
 
 #
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -657,12 +726,15 @@ CONFIG_USB_UHCI_HCD=y
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_BLUETOOTH_TTY is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 # CONFIG_USB_STORAGE is not set
 
@@ -681,9 +753,11 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_MTOUCH is not set
 # CONFIG_USB_ITMTOUCH is not set
 # CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
 
 #
 # USB Imaging devices
@@ -750,6 +824,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
 # CONFIG_USB_SERIAL_KLSI is not set
 # CONFIG_USB_SERIAL_KOBIL_SCT is not set
 # CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_NOKIA_DKU2 is not set
 # CONFIG_USB_SERIAL_PL2303 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
@@ -814,10 +889,6 @@ CONFIG_JBD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -826,6 +897,7 @@ CONFIG_INOTIFY=y
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -849,14 +921,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-CONFIG_DEVPTS_FS_XATTR=y
-# CONFIG_DEVPTS_FS_SECURITY is not set
 CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -898,6 +967,7 @@ CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -964,9 +1034,19 @@ CONFIG_NLS_DEFAULT="utf-8"
 CONFIG_NLS_UTF8=y
 
 #
-# Profiling support
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+
+#
+# Instrumentation Support
 #
 # CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
 
 #
 # Kernel hacking
@@ -975,6 +1055,7 @@ CONFIG_NLS_UTF8=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=17
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 CONFIG_DEBUG_SLAB=y
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -982,14 +1063,15 @@ CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_KPROBES is not set
 CONFIG_DEBUG_STACK_USAGE=y
 CONFIG_DEBUGGER=y
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
-# CONFIG_PPCDBG is not set
 # CONFIG_IRQSTACKS is not set
+CONFIG_BOOTX_TEXT=y
 
 #
 # Security options
@@ -1029,11 +1111,3 @@ CONFIG_CRYPTO_DES=y
 #
 # Hardware crypto devices
 #
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=y
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
diff --git a/arch/ppc64/defconfig b/arch/powerpc/configs/ppc64_defconfig
index 7cb4750bb7a9..b5ba3bbd96fb 100644
--- a/arch/ppc64/defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -1,18 +1,33 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc6
-# Mon Aug  8 14:16:54 2005
+# Linux kernel version: 2.6.15-rc1
+# Fri Nov 18 16:23:24 2005
 #
+CONFIG_PPC64=y
 CONFIG_64BIT=y
+CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_FORCE_MAX_ZONEORDER=13
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+
+#
+# Processor support
+#
+# CONFIG_POWER4_ONLY is not set
+CONFIG_POWER3=y
+CONFIG_POWER4=y
+CONFIG_PPC_FPU=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=32
 
 #
 # Code maturity level options
@@ -26,6 +41,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -37,9 +53,10 @@ CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CPUSETS=y
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -65,80 +82,119 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
 
 #
 # Platform support
 #
-# CONFIG_PPC_ISERIES is not set
 CONFIG_PPC_MULTIPLATFORM=y
+# CONFIG_PPC_ISERIES is not set
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_APUS is not set
 CONFIG_PPC_PSERIES=y
-CONFIG_PPC_BPA=y
 CONFIG_PPC_PMAC=y
+CONFIG_PPC_PMAC64=y
 CONFIG_PPC_MAPLE=y
-CONFIG_PPC=y
-CONFIG_PPC64=y
+# CONFIG_PPC_CELL is not set
 CONFIG_PPC_OF=y
 CONFIG_XICS=y
-CONFIG_MPIC=y
-CONFIG_BPA_IIC=y
-CONFIG_ALTIVEC=y
-CONFIG_PPC_SPLPAR=y
-CONFIG_KEXEC=y
-CONFIG_IBMVIO=y
 CONFIG_U3_DART=y
+CONFIG_MPIC=y
+CONFIG_PPC_RTAS=y
+CONFIG_RTAS_ERROR_LOGGING=y
+CONFIG_RTAS_PROC=y
+CONFIG_RTAS_FLASH=m
+# CONFIG_MMIO_NVRAM is not set
 CONFIG_MPIC_BROKEN_U3=y
-CONFIG_PPC_PMAC64=y
-CONFIG_BOOTX_TEXT=y
-# CONFIG_POWER4_ONLY is not set
-CONFIG_IOMMU_VMERGE=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=32
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
-CONFIG_NODES_SPAN_OTHER_NODES=y
-# CONFIG_NUMA is not set
-# CONFIG_SCHED_SMT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
+CONFIG_IBMVIO=y
+# CONFIG_PPC_MPC106 is not set
+CONFIG_GENERIC_TBSYNC=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_PMAC64=y
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Kernel options
+#
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_PREEMPT_BKL is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+CONFIG_FORCE_MAX_ZONEORDER=13
+CONFIG_IOMMU_VMERGE=y
+CONFIG_HOTPLUG_CPU=y
+CONFIG_KEXEC=y
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_PPC_SPLPAR=y
 CONFIG_EEH=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_PPC_RTAS=y
-CONFIG_RTAS_PROC=y
-CONFIG_RTAS_FLASH=m
 CONFIG_SCANLOG=m
 CONFIG_LPARCFG=y
+# CONFIG_NUMA is not set
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_EXTREME=y
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_SCHED_SMT is not set
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
 #
-# General setup
+# Bus options
 #
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_I8259=y
+# CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
 # CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
 # CONFIG_PCI_DEBUG is not set
-CONFIG_HOTPLUG_CPU=y
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -154,8 +210,7 @@ CONFIG_HOTPLUG_PCI=m
 # CONFIG_HOTPLUG_PCI_SHPC is not set
 CONFIG_HOTPLUG_PCI_RPA=m
 CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
+CONFIG_KERNEL_START=0xc000000000000000
 
 #
 # Networking
@@ -185,8 +240,8 @@ CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_TUNNEL=y
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 
@@ -199,16 +254,27 @@ CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
 #
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=y
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
 # IP: Netfilter Configuration
 #
 CONFIG_IP_NF_CONNTRACK=m
 CONFIG_IP_NF_CT_ACCT=y
 CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
+CONFIG_IP_NF_CONNTRACK_NETLINK=m
 CONFIG_IP_NF_CT_PROTO_SCTP=m
 CONFIG_IP_NF_FTP=m
 CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_LIMIT=m
@@ -232,14 +298,18 @@ CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_REALM=m
 CONFIG_IP_NF_MATCH_SCTP=m
+CONFIG_IP_NF_MATCH_DCCP=m
 CONFIG_IP_NF_MATCH_COMMENT=m
 CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -257,6 +327,7 @@ CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_DSCP=m
 CONFIG_IP_NF_TARGET_MARK=m
 CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_TARGET_CONNMARK=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
@@ -266,6 +337,11 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
@@ -282,6 +358,10 @@ CONFIG_LLC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -292,6 +372,7 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -306,6 +387,11 @@ CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -313,13 +399,7 @@ CONFIG_FW_LOADER=y
 #
 # Parallel port support
 #
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-# CONFIG_PARPORT_SERIAL is not set
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_1284 is not set
+# CONFIG_PARPORT is not set
 
 #
 # Plug and Play support
@@ -329,7 +409,6 @@ CONFIG_PARPORT_PC=m
 # Block devices
 #
 CONFIG_BLK_DEV_FD=y
-# CONFIG_PARIDE is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -344,16 +423,7 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -383,7 +453,7 @@ CONFIG_IDEPCI_SHARE_IRQ=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_SL82C105=y
+# CONFIG_BLK_DEV_SL82C105 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
 CONFIG_IDEDMA_PCI_AUTO=y
@@ -422,6 +492,7 @@ CONFIG_IDEDMA_AUTO=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -449,10 +520,12 @@ CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_FC_ATTRS=y
 CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
 #
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -462,15 +535,19 @@ CONFIG_SCSI_ISCSI_ATTRS=m
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 CONFIG_SCSI_SATA=y
 # CONFIG_SCSI_SATA_AHCI is not set
 CONFIG_SCSI_SATA_SVW=y
 # CONFIG_SCSI_ATA_PIIX is not set
+# CONFIG_SCSI_SATA_MV is not set
 # CONFIG_SCSI_SATA_NV is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_PDC_ADMA is not set
 # CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
 # CONFIG_SCSI_SATA_SX4 is not set
 # CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIL24 is not set
 # CONFIG_SCSI_SATA_SIS is not set
 # CONFIG_SCSI_SATA_ULI is not set
 # CONFIG_SCSI_SATA_VIA is not set
@@ -484,8 +561,6 @@ CONFIG_SCSI_SATA_SVW=y
 CONFIG_SCSI_IBMVSCSI=y
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
@@ -535,6 +610,7 @@ CONFIG_DM_MULTIPATH_EMC=m
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -578,8 +654,10 @@ CONFIG_IEEE1394_AMDTP=m
 #
 CONFIG_ADB_PMU=y
 CONFIG_PMAC_SMU=y
-# CONFIG_PMAC_BACKLIGHT is not set
 CONFIG_THERM_PM72=y
+CONFIG_WINDFARM=y
+CONFIG_WINDFARM_PM81=y
+CONFIG_WINDFARM_PM91=y
 
 #
 # Network device support
@@ -596,12 +674,18 @@ CONFIG_TUN=m
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 CONFIG_SUNGEM=y
+# CONFIG_CASSINI is not set
 CONFIG_NET_VENDOR_3COM=y
 CONFIG_VORTEX=y
 # CONFIG_TYPHOON is not set
@@ -643,6 +727,7 @@ CONFIG_E1000=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
@@ -653,6 +738,7 @@ CONFIG_TIGON3=y
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 CONFIG_IXGB=m
 # CONFIG_IXGB_NAPI is not set
 # CONFIG_S2IO is not set
@@ -676,7 +762,6 @@ CONFIG_IBMOL=y
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
 # CONFIG_PPP_FILTER is not set
@@ -684,6 +769,7 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
@@ -746,7 +832,6 @@ CONFIG_INPUT_PCSPKR=m
 CONFIG_SERIO=y
 CONFIG_SERIO_I8042=y
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
@@ -779,10 +864,6 @@ CONFIG_SERIAL_JSM=m
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
 CONFIG_HVC_CONSOLE=y
 CONFIG_HVCS=m
 
@@ -796,6 +877,7 @@ CONFIG_HVCS=m
 #
 # CONFIG_WATCHDOG is not set
 # CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -813,6 +895,7 @@ CONFIG_MAX_RAW_DEVS=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -838,10 +921,9 @@ CONFIG_I2C_AMD8111=y
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
 CONFIG_I2C_KEYWEST=y
+CONFIG_I2C_PMAC_SMU=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
@@ -854,7 +936,6 @@ CONFIG_I2C_KEYWEST=y
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_SENSOR is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -867,6 +948,7 @@ CONFIG_I2C_KEYWEST=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -881,12 +963,17 @@ CONFIG_I2C_KEYWEST=y
 # Hardware Monitoring support
 #
 # CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
 
 #
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -903,7 +990,6 @@ CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
 CONFIG_FB_MACMODES=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
@@ -918,6 +1004,7 @@ CONFIG_FB_OF=y
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
 # CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 CONFIG_FB_MATROX=y
@@ -939,8 +1026,8 @@ CONFIG_FB_RADEON_I2C=y
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -949,6 +1036,7 @@ CONFIG_FB_RADEON_I2C=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
@@ -969,7 +1057,94 @@ CONFIG_LCD_DEVICE=y
 #
 # Sound
 #
-# CONFIG_SOUND is not set
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_GENERIC_DRIVER=y
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# PCI devices
+#
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
+
+#
+# ALSA PowerMac devices
+#
+CONFIG_SND_POWERMAC=m
+CONFIG_SND_POWERMAC_AUTO_DRC=y
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_USX2Y is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
 
 #
 # USB support
@@ -1003,12 +1178,16 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1020,6 +1199,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 
 #
 # USB Input Devices
@@ -1036,9 +1216,11 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_MTOUCH is not set
 # CONFIG_USB_ITMTOUCH is not set
 # CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
 
 #
 # USB Imaging devices
@@ -1060,7 +1242,7 @@ CONFIG_USB_HIDDEV=y
 #
 # CONFIG_USB_CATC is not set
 # CONFIG_USB_KAWETH is not set
-CONFIG_USB_PEGASUS=y
+# CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_USB_MON is not set
@@ -1068,7 +1250,6 @@ CONFIG_USB_PEGASUS=y
 #
 # USB port drivers
 #
-# CONFIG_USB_USS720 is not set
 
 #
 # USB Serial Converter support
@@ -1111,11 +1292,13 @@ CONFIG_USB_PEGASUS=y
 # InfiniBand support
 #
 CONFIG_INFINIBAND=m
-CONFIG_INFINIBAND_USER_VERBS=m
+# CONFIG_INFINIBAND_USER_MAD is not set
+# CONFIG_INFINIBAND_USER_ACCESS is not set
 CONFIG_INFINIBAND_MTHCA=m
 # CONFIG_INFINIBAND_MTHCA_DEBUG is not set
 CONFIG_INFINIBAND_IPOIB=m
 # CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+# CONFIG_INFINIBAND_SRP is not set
 
 #
 # SN Devices
@@ -1149,16 +1332,12 @@ CONFIG_JFS_SECURITY=y
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
 CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -1166,6 +1345,7 @@ CONFIG_INOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -1192,14 +1372,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1250,6 +1427,7 @@ CONFIG_CIFS_POSIX=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1276,7 +1454,7 @@ CONFIG_MSDOS_PARTITION=y
 #
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
 CONFIG_NLS_CODEPAGE_850=m
@@ -1300,7 +1478,7 @@ CONFIG_NLS_ISO8859_8=m
 CONFIG_NLS_CODEPAGE_1250=m
 CONFIG_NLS_CODEPAGE_1251=m
 CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=m
 CONFIG_NLS_ISO8859_3=m
 CONFIG_NLS_ISO8859_4=m
@@ -1316,10 +1494,25 @@ CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
 
 #
-# Profiling support
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+
+#
+# Instrumentation Support
 #
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
+# CONFIG_KPROBES is not set
 
 #
 # Kernel hacking
@@ -1328,6 +1521,7 @@ CONFIG_OPROFILE=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=17
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1335,14 +1529,15 @@ CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_KPROBES is not set
 CONFIG_DEBUG_STACK_USAGE=y
 CONFIG_DEBUGGER=y
 CONFIG_XMON=y
 # CONFIG_XMON_DEFAULT is not set
-# CONFIG_PPCDBG is not set
 CONFIG_IRQSTACKS=y
+CONFIG_BOOTX_TEXT=y
 
 #
 # Security options
@@ -1382,12 +1577,3 @@ CONFIG_CRYPTO_TEST=m
 #
 # Hardware crypto devices
 #
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/ppc64/configs/pSeries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 29f7b80b0efc..b589b196eb3f 100644
--- a/arch/ppc64/configs/pSeries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -1,18 +1,33 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc6
-# Mon Aug  8 14:17:07 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 14:36:55 2005
 #
+CONFIG_PPC64=y
 CONFIG_64BIT=y
+CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_FORCE_MAX_ZONEORDER=13
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+
+#
+# Processor support
+#
+# CONFIG_POWER4_ONLY is not set
+CONFIG_POWER3=y
+CONFIG_POWER4=y
+CONFIG_PPC_FPU=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=128
 
 #
 # Code maturity level options
@@ -26,6 +41,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -38,6 +54,7 @@ CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CPUSETS=y
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
@@ -66,77 +83,106 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
 
 #
 # Platform support
 #
-# CONFIG_PPC_ISERIES is not set
 CONFIG_PPC_MULTIPLATFORM=y
+# CONFIG_PPC_ISERIES is not set
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_APUS is not set
 CONFIG_PPC_PSERIES=y
-# CONFIG_PPC_BPA is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
-CONFIG_PPC=y
-CONFIG_PPC64=y
+# CONFIG_PPC_CELL is not set
 CONFIG_PPC_OF=y
 CONFIG_XICS=y
+# CONFIG_U3_DART is not set
 CONFIG_MPIC=y
-CONFIG_ALTIVEC=y
-CONFIG_PPC_SPLPAR=y
-CONFIG_KEXEC=y
+CONFIG_PPC_RTAS=y
+CONFIG_RTAS_ERROR_LOGGING=y
+CONFIG_RTAS_PROC=y
+CONFIG_RTAS_FLASH=m
+# CONFIG_MMIO_NVRAM is not set
 CONFIG_IBMVIO=y
-# CONFIG_U3_DART is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_POWER4_ONLY is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Kernel options
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_PREEMPT_BKL is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_IOMMU_VMERGE=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=128
+CONFIG_HOTPLUG_CPU=y
+CONFIG_KEXEC=y
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_PPC_SPLPAR=y
+CONFIG_EEH=y
+CONFIG_SCANLOG=m
+CONFIG_LPARCFG=y
+CONFIG_NUMA=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
 CONFIG_NEED_MULTIPLE_NODES=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_EXTREME=y
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
-CONFIG_NODES_SPAN_OTHER_NODES=y
-CONFIG_NUMA=y
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_SCHED_SMT=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_EEH=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_PPC_RTAS=y
-CONFIG_RTAS_PROC=y
-CONFIG_RTAS_FLASH=m
-CONFIG_SCANLOG=m
-CONFIG_LPARCFG=y
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
 #
-# General setup
+# Bus options
 #
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_I8259=y
+# CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 # CONFIG_PCI_DEBUG is not set
-CONFIG_HOTPLUG_CPU=y
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -152,8 +198,7 @@ CONFIG_HOTPLUG_PCI=m
 # CONFIG_HOTPLUG_PCI_SHPC is not set
 CONFIG_HOTPLUG_PCI_RPA=m
 CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
+CONFIG_KERNEL_START=0xc000000000000000
 
 #
 # Networking
@@ -183,8 +228,8 @@ CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 
@@ -197,16 +242,27 @@ CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
 #
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=y
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
 # IP: Netfilter Configuration
 #
 CONFIG_IP_NF_CONNTRACK=m
 CONFIG_IP_NF_CT_ACCT=y
 CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
+CONFIG_IP_NF_CONNTRACK_NETLINK=m
 CONFIG_IP_NF_CT_PROTO_SCTP=m
 CONFIG_IP_NF_FTP=m
 CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_LIMIT=m
@@ -230,14 +286,18 @@ CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_REALM=m
 CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
 CONFIG_IP_NF_MATCH_COMMENT=m
 CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -255,6 +315,7 @@ CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_DSCP=m
 CONFIG_IP_NF_TARGET_MARK=m
 CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_TARGET_CONNMARK=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
@@ -264,6 +325,11 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
@@ -280,6 +346,10 @@ CONFIG_LLC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -290,6 +360,7 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -304,6 +375,11 @@ CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -342,16 +418,7 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -416,6 +483,7 @@ CONFIG_IDEDMA_AUTO=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -443,10 +511,12 @@ CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_FC_ATTRS=y
 CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
 #
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -456,6 +526,7 @@ CONFIG_SCSI_ISCSI_ATTRS=m
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
@@ -517,6 +588,7 @@ CONFIG_DM_MULTIPATH_EMC=m
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -531,6 +603,7 @@ CONFIG_DM_MULTIPATH_EMC=m
 #
 # Macintosh device drivers
 #
+# CONFIG_WINDFARM is not set
 
 #
 # Network device support
@@ -547,12 +620,18 @@ CONFIG_TUN=m
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 CONFIG_NET_VENDOR_3COM=y
 CONFIG_VORTEX=y
 # CONFIG_TYPHOON is not set
@@ -581,6 +660,7 @@ CONFIG_E100=y
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_VIA_RHINE is not set
+# CONFIG_NET_POCKET is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -594,6 +674,7 @@ CONFIG_E1000=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
@@ -604,11 +685,11 @@ CONFIG_TIGON3=y
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 CONFIG_IXGB=m
 # CONFIG_IXGB_NAPI is not set
 CONFIG_S2IO=m
 # CONFIG_S2IO_NAPI is not set
-# CONFIG_2BUFF_MODE is not set
 
 #
 # Token Ring devices
@@ -637,6 +718,7 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
@@ -747,6 +829,8 @@ CONFIG_HVCS=m
 #
 # CONFIG_WATCHDOG is not set
 # CONFIG_RTC is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -764,6 +848,7 @@ CONFIG_MAX_RAW_DEVS=1024
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -789,7 +874,6 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
@@ -804,7 +888,6 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_SENSOR is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -817,6 +900,7 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -831,12 +915,17 @@ CONFIG_I2C_ALGOBIT=y
 # Hardware Monitoring support
 #
 # CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
 
 #
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -853,7 +942,6 @@ CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
 CONFIG_FB_MACMODES=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
@@ -865,6 +953,7 @@ CONFIG_FB_OF=y
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
 # CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 CONFIG_FB_MATROX=y
@@ -885,8 +974,8 @@ CONFIG_FB_RADEON_I2C=y
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -895,6 +984,7 @@ CONFIG_FB_RADEON_I2C=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
@@ -949,12 +1039,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_BLUETOOTH_TTY is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -982,9 +1075,11 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_MTOUCH is not set
 # CONFIG_USB_ITMTOUCH is not set
 # CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
 
 #
 # USB Imaging devices
@@ -1057,11 +1152,13 @@ CONFIG_USB_MON=y
 # InfiniBand support
 #
 CONFIG_INFINIBAND=m
-CONFIG_INFINIBAND_USER_VERBS=m
+# CONFIG_INFINIBAND_USER_MAD is not set
+# CONFIG_INFINIBAND_USER_ACCESS is not set
 CONFIG_INFINIBAND_MTHCA=m
 # CONFIG_INFINIBAND_MTHCA_DEBUG is not set
 CONFIG_INFINIBAND_IPOIB=m
 # CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+# CONFIG_INFINIBAND_SRP is not set
 
 #
 # SN Devices
@@ -1095,16 +1192,12 @@ CONFIG_JFS_SECURITY=y
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
 CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -1112,6 +1205,7 @@ CONFIG_INOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -1139,14 +1233,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1197,6 +1288,7 @@ CONFIG_CIFS_POSIX=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1249,10 +1341,25 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_UTF8 is not set
 
 #
-# Profiling support
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+
+#
+# Instrumentation Support
 #
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
+# CONFIG_KPROBES is not set
 
 #
 # Kernel hacking
@@ -1261,6 +1368,7 @@ CONFIG_OPROFILE=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=17
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1268,14 +1376,15 @@ CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_KPROBES is not set
 CONFIG_DEBUG_STACK_USAGE=y
 CONFIG_DEBUGGER=y
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
-# CONFIG_PPCDBG is not set
 CONFIG_IRQSTACKS=y
+# CONFIG_BOOTX_TEXT is not set
 
 #
 # Security options
@@ -1315,12 +1424,3 @@ CONFIG_CRYPTO_TEST=m
 #
 # Hardware crypto devices
 #
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
new file mode 100644
index 000000000000..9ed551b6c172
--- /dev/null
+++ b/arch/powerpc/kernel/Makefile
@@ -0,0 +1,85 @@
+#
+# Makefile for the linux kernel.
+#
+
+ifeq ($(CONFIG_PPC64),y)
+EXTRA_CFLAGS	+= -mno-minimal-toc
+CFLAGS_ioctl32.o += -Ifs/
+endif
+ifeq ($(CONFIG_PPC32),y)
+CFLAGS_prom_init.o      += -fPIC
+CFLAGS_btext.o		+= -fPIC
+endif
+
+obj-y				:= semaphore.o cputable.o ptrace.o syscalls.o \
+				   irq.o align.o signal_32.o pmc.o vdso.o
+obj-y				+= vdso32/
+obj-$(CONFIG_PPC64)		+= setup_64.o binfmt_elf32.o sys_ppc32.o \
+				   signal_64.o ptrace32.o systbl.o \
+				   paca.o ioctl32.o cpu_setup_power4.o \
+				   firmware.o sysfs.o udbg.o idle_64.o
+obj-$(CONFIG_PPC64)		+= vdso64/
+obj-$(CONFIG_ALTIVEC)		+= vecemu.o vector.o
+obj-$(CONFIG_POWER4)		+= idle_power4.o
+obj-$(CONFIG_PPC_OF)		+= of_device.o
+procfs-$(CONFIG_PPC64)		:= proc_ppc64.o
+obj-$(CONFIG_PROC_FS)		+= $(procfs-y)
+rtaspci-$(CONFIG_PPC64)		:= rtas_pci.o
+obj-$(CONFIG_PPC_RTAS)		+= rtas.o rtas-rtc.o $(rtaspci-y)
+obj-$(CONFIG_RTAS_FLASH)	+= rtas_flash.o
+obj-$(CONFIG_RTAS_PROC)		+= rtas-proc.o
+obj-$(CONFIG_LPARCFG)		+= lparcfg.o
+obj-$(CONFIG_IBMVIO)		+= vio.o
+obj-$(CONFIG_GENERIC_TBSYNC)	+= smp-tbsync.o
+obj-$(CONFIG_PPC_PSERIES)	+= udbg_16550.o
+obj-$(CONFIG_PPC_MAPLE)		+= udbg_16550.o
+udbgscc-$(CONFIG_PPC64)		:= udbg_scc.o
+obj-$(CONFIG_PPC_PMAC)		+= $(udbgscc-y)
+obj64-$(CONFIG_PPC_MULTIPLATFORM) += nvram_64.o
+
+ifeq ($(CONFIG_PPC_MERGE),y)
+
+extra-$(CONFIG_PPC_STD_MMU)	:= head_32.o
+extra-$(CONFIG_PPC64)		:= head_64.o
+extra-$(CONFIG_40x)		:= head_4xx.o
+extra-$(CONFIG_44x)		:= head_44x.o
+extra-$(CONFIG_FSL_BOOKE)	:= head_fsl_booke.o
+extra-$(CONFIG_8xx)		:= head_8xx.o
+extra-y				+= vmlinux.lds
+
+obj-y				+= process.o init_task.o time.o \
+				   prom.o traps.o setup-common.o
+obj-$(CONFIG_PPC32)		+= entry_32.o setup_32.o misc_32.o systbl.o
+obj-$(CONFIG_PPC64)		+= misc_64.o dma_64.o iommu.o
+obj-$(CONFIG_PPC_OF)		+= prom_init.o
+obj-$(CONFIG_MODULES)		+= ppc_ksyms.o
+obj-$(CONFIG_BOOTX_TEXT)	+= btext.o
+obj-$(CONFIG_6xx)		+= idle_6xx.o
+obj-$(CONFIG_SMP)		+= smp.o
+obj-$(CONFIG_KPROBES)		+= kprobes.o
+
+module-$(CONFIG_PPC64)		+= module_64.o
+obj-$(CONFIG_MODULES)		+= $(module-y)
+
+pci64-$(CONFIG_PPC64)		+= pci_64.o pci_dn.o pci_iommu.o \
+				   pci_direct_iommu.o iomap.o
+obj-$(CONFIG_PCI)		+= $(pci64-y)
+
+kexec64-$(CONFIG_PPC64)		+= machine_kexec_64.o
+obj-$(CONFIG_KEXEC)		+= $(kexec64-y)
+
+ifeq ($(CONFIG_PPC_ISERIES),y)
+$(obj)/head_64.o: $(obj)/lparmap.s
+AFLAGS_head_64.o += -I$(obj)
+endif
+
+else
+# stuff used from here for ARCH=ppc
+smpobj-$(CONFIG_SMP)		+= smp.o
+
+endif
+
+obj-$(CONFIG_PPC64)		+= $(obj64-y)
+
+extra-$(CONFIG_PPC_FPU)		+= fpu.o
+extra-$(CONFIG_PPC64)		+= entry_64.o
diff --git a/arch/ppc64/kernel/align.c b/arch/powerpc/kernel/align.c
index 330e7ef81427..faaec9c6f78f 100644
--- a/arch/ppc64/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -7,6 +7,9 @@
  *   PowerPC 403GCX/405GP modifications.
  * Copyright (c) 2001-2002 PPC64 team, IBM Corp
  *   64-bit and Power4 support
+ * Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp
+ *                    <benh@kernel.crashing.org>
+ *   Merge ppc32 and ppc64 implementations
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -38,10 +41,15 @@ struct aligninfo {
 #define F	8	/* to/from fp regs */
 #define U	0x10	/* update index register */
 #define M	0x20	/* multiple load/store */
-#define SW	0x40	/* byte swap */
+#define SW	0x40	/* byte swap int or ... */
+#define S	0x40	/* ... single-precision fp */
+#define SX	0x40	/* byte count in XER */
+#define HARD	0x80	/* string, stwcx. */
 
 #define DCBZ	0x5f	/* 8xx/82xx dcbz faults when cache not enabled */
 
+#define SWAP(a, b)	(t = (a), (a) = (b), (b) = t)
+
 /*
  * The PowerPC stores certain bits of the instruction that caused the
  * alignment exception in the DSISR register.  This array maps those
@@ -57,14 +65,14 @@ static struct aligninfo aligninfo[128] = {
 	{ 2, LD+SE },		/* 00 0 0101: lha */
 	{ 2, ST },		/* 00 0 0110: sth */
 	{ 4, LD+M },		/* 00 0 0111: lmw */
-	{ 4, LD+F },		/* 00 0 1000: lfs */
+	{ 4, LD+F+S },		/* 00 0 1000: lfs */
 	{ 8, LD+F },		/* 00 0 1001: lfd */
-	{ 4, ST+F },		/* 00 0 1010: stfs */
+	{ 4, ST+F+S },		/* 00 0 1010: stfs */
 	{ 8, ST+F },		/* 00 0 1011: stfd */
 	INVALID,		/* 00 0 1100 */
-	{ 8, LD },		/* 00 0 1101: ld */
+	{ 8, LD },		/* 00 0 1101: ld/ldu/lwa */
 	INVALID,		/* 00 0 1110 */
-	{ 8, ST },		/* 00 0 1111: std */
+	{ 8, ST },		/* 00 0 1111: std/stdu */
 	{ 4, LD+U },		/* 00 1 0000: lwzu */
 	INVALID,		/* 00 1 0001 */
 	{ 4, ST+U },		/* 00 1 0010: stwu */
@@ -73,9 +81,9 @@ static struct aligninfo aligninfo[128] = {
 	{ 2, LD+SE+U },		/* 00 1 0101: lhau */
 	{ 2, ST+U },		/* 00 1 0110: sthu */
 	{ 4, ST+M },		/* 00 1 0111: stmw */
-	{ 4, LD+F+U },		/* 00 1 1000: lfsu */
+	{ 4, LD+F+S+U },	/* 00 1 1000: lfsu */
 	{ 8, LD+F+U },		/* 00 1 1001: lfdu */
-	{ 4, ST+F+U },		/* 00 1 1010: stfsu */
+	{ 4, ST+F+S+U },	/* 00 1 1010: stfsu */
 	{ 8, ST+F+U },		/* 00 1 1011: stfdu */
 	INVALID,		/* 00 1 1100 */
 	INVALID,		/* 00 1 1101 */
@@ -89,10 +97,10 @@ static struct aligninfo aligninfo[128] = {
 	{ 4, LD+SE },		/* 01 0 0101: lwax */
 	INVALID,		/* 01 0 0110 */
 	INVALID,		/* 01 0 0111 */
-	{ 0, LD },		/* 01 0 1000: lswx */
-	{ 0, LD },		/* 01 0 1001: lswi */
-	{ 0, ST },		/* 01 0 1010: stswx */
-	{ 0, ST },		/* 01 0 1011: stswi */
+	{ 4, LD+M+HARD+SX },	/* 01 0 1000: lswx */
+	{ 4, LD+M+HARD },	/* 01 0 1001: lswi */
+	{ 4, ST+M+HARD+SX },	/* 01 0 1010: stswx */
+	{ 4, ST+M+HARD },	/* 01 0 1011: stswi */
 	INVALID,		/* 01 0 1100 */
 	{ 8, LD+U },		/* 01 0 1101: ldu */
 	INVALID,		/* 01 0 1110 */
@@ -115,7 +123,7 @@ static struct aligninfo aligninfo[128] = {
 	INVALID,		/* 01 1 1111 */
 	INVALID,		/* 10 0 0000 */
 	INVALID,		/* 10 0 0001 */
-	{ 0, ST },		/* 10 0 0010: stwcx. */
+	INVALID,		/* 10 0 0010: stwcx. */
 	INVALID,		/* 10 0 0011 */
 	INVALID,		/* 10 0 0100 */
 	INVALID,		/* 10 0 0101 */
@@ -144,7 +152,7 @@ static struct aligninfo aligninfo[128] = {
 	INVALID,		/* 10 1 1100 */
 	INVALID,		/* 10 1 1101 */
 	INVALID,		/* 10 1 1110 */
-	{ L1_CACHE_BYTES, ST },	/* 10 1 1111: dcbz */
+	{ 0, ST+HARD },		/* 10 1 1111: dcbz */
 	{ 4, LD },		/* 11 0 0000: lwzx */
 	INVALID,		/* 11 0 0001 */
 	{ 4, ST },		/* 11 0 0010: stwx */
@@ -153,9 +161,9 @@ static struct aligninfo aligninfo[128] = {
 	{ 2, LD+SE },		/* 11 0 0101: lhax */
 	{ 2, ST },		/* 11 0 0110: sthx */
 	INVALID,		/* 11 0 0111 */
-	{ 4, LD+F },		/* 11 0 1000: lfsx */
+	{ 4, LD+F+S },		/* 11 0 1000: lfsx */
 	{ 8, LD+F },		/* 11 0 1001: lfdx */
-	{ 4, ST+F },		/* 11 0 1010: stfsx */
+	{ 4, ST+F+S },		/* 11 0 1010: stfsx */
 	{ 8, ST+F },		/* 11 0 1011: stfdx */
 	INVALID,		/* 11 0 1100 */
 	{ 8, LD+M },		/* 11 0 1101: lmd */
@@ -169,9 +177,9 @@ static struct aligninfo aligninfo[128] = {
 	{ 2, LD+SE+U },		/* 11 1 0101: lhaux */
 	{ 2, ST+U },		/* 11 1 0110: sthux */
 	INVALID,		/* 11 1 0111 */
-	{ 4, LD+F+U },		/* 11 1 1000: lfsux */
+	{ 4, LD+F+S+U },	/* 11 1 1000: lfsux */
 	{ 8, LD+F+U },		/* 11 1 1001: lfdux */
-	{ 4, ST+F+U },		/* 11 1 1010: stfsux */
+	{ 4, ST+F+S+U },	/* 11 1 1010: stfsux */
 	{ 8, ST+F+U },		/* 11 1 1011: stfdux */
 	INVALID,		/* 11 1 1100 */
 	INVALID,		/* 11 1 1101 */
@@ -179,45 +187,175 @@ static struct aligninfo aligninfo[128] = {
 	INVALID,		/* 11 1 1111 */
 };
 
-#define SWAP(a, b)	(t = (a), (a) = (b), (b) = t)
-
+/*
+ * Create a DSISR value from the instruction
+ */
 static inline unsigned make_dsisr(unsigned instr)
 {
 	unsigned dsisr;
-	
-	/* create a DSISR value from the instruction */
-	dsisr = (instr & 0x03ff0000) >> 16;			/* bits  6:15 --> 22:31 */
-	
-	if ( IS_XFORM(instr) ) {
-		dsisr |= (instr & 0x00000006) << 14;		/* bits 29:30 --> 15:16 */
-		dsisr |= (instr & 0x00000040) << 8;		/* bit     25 -->    17 */
-		dsisr |= (instr & 0x00000780) << 3;		/* bits 21:24 --> 18:21 */
+
+
+	/* bits  6:15 --> 22:31 */
+	dsisr = (instr & 0x03ff0000) >> 16;
+
+	if (IS_XFORM(instr)) {
+		/* bits 29:30 --> 15:16 */
+		dsisr |= (instr & 0x00000006) << 14;
+		/* bit     25 -->    17 */
+		dsisr |= (instr & 0x00000040) << 8;
+		/* bits 21:24 --> 18:21 */
+		dsisr |= (instr & 0x00000780) << 3;
+	} else {
+		/* bit      5 -->    17 */
+		dsisr |= (instr & 0x04000000) >> 12;
+		/* bits  1: 4 --> 18:21 */
+		dsisr |= (instr & 0x78000000) >> 17;
+		/* bits 30:31 --> 12:13 */
+		if (IS_DSFORM(instr))
+			dsisr |= (instr & 0x00000003) << 18;
 	}
-	else {
-		dsisr |= (instr & 0x04000000) >> 12;		/* bit      5 -->    17 */
-		dsisr |= (instr & 0x78000000) >> 17;		/* bits  1: 4 --> 18:21 */
-		if ( IS_DSFORM(instr) ) {
-			dsisr |= (instr & 0x00000003) << 18;	/* bits 30:31 --> 12:13 */
+
+	return dsisr;
+}
+
+/*
+ * The dcbz (data cache block zero) instruction
+ * gives an alignment fault if used on non-cacheable
+ * memory.  We handle the fault mainly for the
+ * case when we are running with the cache disabled
+ * for debugging.
+ */
+static int emulate_dcbz(struct pt_regs *regs, unsigned char __user *addr)
+{
+	long __user *p;
+	int i, size;
+
+#ifdef __powerpc64__
+	size = ppc64_caches.dline_size;
+#else
+	size = L1_CACHE_BYTES;
+#endif
+	p = (long __user *) (regs->dar & -size);
+	if (user_mode(regs) && !access_ok(VERIFY_WRITE, p, size))
+		return -EFAULT;
+	for (i = 0; i < size / sizeof(long); ++i)
+		if (__put_user(0, p+i))
+			return -EFAULT;
+	return 1;
+}
+
+/*
+ * Emulate load & store multiple instructions
+ * On 64-bit machines, these instructions only affect/use the
+ * bottom 4 bytes of each register, and the loads clear the
+ * top 4 bytes of the affected register.
+ */
+#ifdef CONFIG_PPC64
+#define REG_BYTE(rp, i)		*((u8 *)((rp) + ((i) >> 2)) + ((i) & 3) + 4)
+#else
+#define REG_BYTE(rp, i)		*((u8 *)(rp) + (i))
+#endif
+
+static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr,
+			    unsigned int reg, unsigned int nb,
+			    unsigned int flags, unsigned int instr)
+{
+	unsigned long *rptr;
+	unsigned int nb0, i;
+
+	/*
+	 * We do not try to emulate 8 bytes multiple as they aren't really
+	 * available in our operating environments and we don't try to
+	 * emulate multiples operations in kernel land as they should never
+	 * be used/generated there at least not on unaligned boundaries
+	 */
+	if (unlikely((nb > 4) || !user_mode(regs)))
+		return 0;
+
+	/* lmw, stmw, lswi/x, stswi/x */
+	nb0 = 0;
+	if (flags & HARD) {
+		if (flags & SX) {
+			nb = regs->xer & 127;
+			if (nb == 0)
+				return 1;
+		} else {
+			if (__get_user(instr,
+				       (unsigned int __user *)regs->nip))
+				return -EFAULT;
+			nb = (instr >> 11) & 0x1f;
+			if (nb == 0)
+				nb = 32;
 		}
+		if (nb + reg * 4 > 128) {
+			nb0 = nb + reg * 4 - 128;
+			nb = 128 - reg * 4;
+		}
+	} else {
+		/* lwm, stmw */
+		nb = (32 - reg) * 4;
 	}
-	
-	return dsisr;
+
+	if (!access_ok((flags & ST ? VERIFY_WRITE: VERIFY_READ), addr, nb+nb0))
+		return -EFAULT;	/* bad address */
+
+	rptr = &regs->gpr[reg];
+	if (flags & LD) {
+		/*
+		 * This zeroes the top 4 bytes of the affected registers
+		 * in 64-bit mode, and also zeroes out any remaining
+		 * bytes of the last register for lsw*.
+		 */
+		memset(rptr, 0, ((nb + 3) / 4) * sizeof(unsigned long));
+		if (nb0 > 0)
+			memset(&regs->gpr[0], 0,
+			       ((nb0 + 3) / 4) * sizeof(unsigned long));
+
+		for (i = 0; i < nb; ++i)
+			if (__get_user(REG_BYTE(rptr, i), addr + i))
+				return -EFAULT;
+		if (nb0 > 0) {
+			rptr = &regs->gpr[0];
+			addr += nb;
+			for (i = 0; i < nb0; ++i)
+				if (__get_user(REG_BYTE(rptr, i), addr + i))
+					return -EFAULT;
+		}
+
+	} else {
+		for (i = 0; i < nb; ++i)
+			if (__put_user(REG_BYTE(rptr, i), addr + i))
+				return -EFAULT;
+		if (nb0 > 0) {
+			rptr = &regs->gpr[0];
+			addr += nb;
+			for (i = 0; i < nb0; ++i)
+				if (__put_user(REG_BYTE(rptr, i), addr + i))
+					return -EFAULT;
+		}
+	}
+	return 1;
 }
 
-int
-fix_alignment(struct pt_regs *regs)
+
+/*
+ * Called on alignment exception. Attempts to fixup
+ *
+ * Return 1 on success
+ * Return 0 if unable to handle the interrupt
+ * Return -EFAULT if data address is bad
+ */
+
+int fix_alignment(struct pt_regs *regs)
 {
 	unsigned int instr, nb, flags;
-	int t;
-	unsigned long reg, areg;
-	unsigned long i;
-	int ret;
-	unsigned dsisr;
+	unsigned int reg, areg;
+	unsigned int dsisr;
 	unsigned char __user *addr;
 	unsigned char __user *p;
-	unsigned long __user *lp;
+	int ret, t;
 	union {
-		long ll;
+		u64 ll;
 		double dd;
 		unsigned char v[8];
 		struct {
@@ -231,18 +369,22 @@ fix_alignment(struct pt_regs *regs)
 	} data;
 
 	/*
-	 * Return 1 on success
-	 * Return 0 if unable to handle the interrupt
-	 * Return -EFAULT if data address is bad
+	 * We require a complete register set, if not, then our assembly
+	 * is broken
 	 */
+	CHECK_FULL_REGS(regs);
 
 	dsisr = regs->dsisr;
 
+	/* Some processors don't provide us with a DSISR we can use here,
+	 * let's make one up from the instruction
+	 */
 	if (cpu_has_feature(CPU_FTR_NODSISRALIGN)) {
-	    unsigned int real_instr;
-	    if (__get_user(real_instr, (unsigned int __user *)regs->nip))
-		return 0;
-	    dsisr = make_dsisr(real_instr);
+		unsigned int real_instr;
+		if (unlikely(__get_user(real_instr,
+					(unsigned int __user *)regs->nip)))
+			return -EFAULT;
+		dsisr = make_dsisr(real_instr);
 	}
 
 	/* extract the operation and registers from the dsisr */
@@ -258,33 +400,37 @@ fix_alignment(struct pt_regs *regs)
 	/* DAR has the operand effective address */
 	addr = (unsigned char __user *)regs->dar;
 
-	/* A size of 0 indicates an instruction we don't support */
-	/* we also don't support the multiples (lmw, stmw, lmd, stmd) */
-	if ((nb == 0) || (flags & M))
-		return 0;		/* too hard or invalid instruction */
-
-	/*
-	 * Special handling for dcbz
-	 * dcbz may give an alignment exception for accesses to caching inhibited
-	 * storage
+	/* A size of 0 indicates an instruction we don't support, with
+	 * the exception of DCBZ which is handled as a special case here
 	 */
 	if (instr == DCBZ)
-		addr = (unsigned char __user *) ((unsigned long)addr & -L1_CACHE_BYTES);
+		return emulate_dcbz(regs, addr);
+	if (unlikely(nb == 0))
+		return 0;
+
+	/* Load/Store Multiple instructions are handled in their own
+	 * function
+	 */
+	if (flags & M)
+		return emulate_multiple(regs, addr, reg, nb, flags, instr);
 
 	/* Verify the address of the operand */
-	if (user_mode(regs)) {
-		if (!access_ok((flags & ST? VERIFY_WRITE: VERIFY_READ), addr, nb))
-			return -EFAULT;	/* bad address */
-	}
+	if (unlikely(user_mode(regs) &&
+		     !access_ok((flags & ST ? VERIFY_WRITE : VERIFY_READ),
+				addr, nb)))
+		return -EFAULT;
 
 	/* Force the fprs into the save area so we can reference them */
 	if (flags & F) {
-		if (!user_mode(regs))
+		/* userland only */
+		if (unlikely(!user_mode(regs)))
 			return 0;
 		flush_fp_to_thread(current);
 	}
-	
-	/* If we are loading, get the data from user space */
+
+	/* If we are loading, get the data from user space, else
+	 * get it from register values
+	 */
 	if (flags & LD) {
 		data.ll = 0;
 		ret = 0;
@@ -301,75 +447,62 @@ fix_alignment(struct pt_regs *regs)
 		case 2:
 			ret |= __get_user(data.v[6], p++);
 			ret |= __get_user(data.v[7], p++);
-			if (ret)
+			if (unlikely(ret))
 				return -EFAULT;
 		}
-	}
-	
-	/* If we are storing, get the data from the saved gpr or fpr */
-	if (flags & ST) {
-		if (flags & F) {
-			if (nb == 4) {
-				/* Doing stfs, have to convert to single */
-				preempt_disable();
-				enable_kernel_fp();
-				cvt_df(&current->thread.fpr[reg], (float *)&data.v[4], &current->thread.fpscr);
-				disable_kernel_fp();
-				preempt_enable();
-			}
-			else
-				data.dd = current->thread.fpr[reg];
-		}
-		else 
-			data.ll = regs->gpr[reg];
-	}
-	
-	/* Swap bytes as needed */
-	if (flags & SW) {
-		if (nb == 2)
-			SWAP(data.v[6], data.v[7]);
-		else {	/* nb must be 4 */
-			SWAP(data.v[4], data.v[7]);
-			SWAP(data.v[5], data.v[6]);
-		}
-	}
-	
-	/* Sign extend as needed */
-	if (flags & SE) {
+	} else if (flags & F)
+		data.dd = current->thread.fpr[reg];
+	else
+		data.ll = regs->gpr[reg];
+
+	/* Perform other misc operations like sign extension, byteswap,
+	 * or floating point single precision conversion
+	 */
+	switch (flags & ~U) {
+	case LD+SE:	/* sign extend */
 		if ( nb == 2 )
 			data.ll = data.x16.low16;
 		else	/* nb must be 4 */
 			data.ll = data.x32.low32;
-	}
-	
-	/* If we are loading, move the data to the gpr or fpr */
-	if (flags & LD) {
-		if (flags & F) {
-			if (nb == 4) {
-				/* Doing lfs, have to convert to double */
-				preempt_disable();
-				enable_kernel_fp();
-				cvt_fd((float *)&data.v[4], &current->thread.fpr[reg], &current->thread.fpscr);
-				disable_kernel_fp();
-				preempt_enable();
-			}
-			else
-				current->thread.fpr[reg] = data.dd;
+		break;
+	case LD+S:	/* byte-swap */
+	case ST+S:
+		if (nb == 2) {
+			SWAP(data.v[6], data.v[7]);
+		} else {
+			SWAP(data.v[4], data.v[7]);
+			SWAP(data.v[5], data.v[6]);
 		}
-		else
-			regs->gpr[reg] = data.ll;
+		break;
+
+	/* Single-precision FP load and store require conversions... */
+	case LD+F+S:
+#ifdef CONFIG_PPC_FPU
+		preempt_disable();
+		enable_kernel_fp();
+		cvt_fd((float *)&data.v[4], &data.dd, &current->thread);
+		preempt_enable();
+#else
+		return 0;
+#endif
+		break;
+	case ST+F+S:
+#ifdef CONFIG_PPC_FPU
+		preempt_disable();
+		enable_kernel_fp();
+		cvt_df(&data.dd, (float *)&data.v[4], &current->thread);
+		preempt_enable();
+#else
+		return 0;
+#endif
+		break;
 	}
-	
-	/* If we are storing, copy the data to the user */
+
+	/* Store result to memory or update registers */
 	if (flags & ST) {
 		ret = 0;
 		p = addr;
 		switch (nb) {
-		case 128:	/* Special case - must be dcbz */
-			lp = (unsigned long __user *)p;
-			for (i = 0; i < L1_CACHE_BYTES / sizeof(long); ++i)
-				ret |= __put_user(0, lp++);
-			break;
 		case 8:
 			ret |= __put_user(data.v[0], p++);
 			ret |= __put_user(data.v[1], p++);
@@ -382,15 +515,16 @@ fix_alignment(struct pt_regs *regs)
 			ret |= __put_user(data.v[6], p++);
 			ret |= __put_user(data.v[7], p++);
 		}
-		if (ret)
+		if (unlikely(ret))
 			return -EFAULT;
-	}
-	
+	} else if (flags & F)
+		current->thread.fpr[reg] = data.dd;
+	else
+		regs->gpr[reg] = data.ll;
+
 	/* Update RA as needed */
-	if (flags & U) {
+	if (flags & U)
 		regs->gpr[areg] = regs->dar;
-	}
 
 	return 1;
 }
-
diff --git a/arch/ppc64/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 1ff4fa05a973..91538d2445bf 100644
--- a/arch/ppc64/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -22,21 +22,29 @@
 #include <linux/types.h>
 #include <linux/mman.h>
 #include <linux/mm.h>
+#ifdef CONFIG_PPC64
 #include <linux/time.h>
 #include <linux/hardirq.h>
+#else
+#include <linux/ptrace.h>
+#include <linux/suspend.h>
+#endif
+
 #include <asm/io.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/processor.h>
-
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/rtas.h>
+#include <asm/vdso_datapage.h>
+#ifdef CONFIG_PPC64
 #include <asm/paca.h>
 #include <asm/lppaca.h>
-#include <asm/iSeries/HvLpEvent.h>
-#include <asm/rtas.h>
-#include <asm/cputable.h>
+#include <asm/iseries/hv_lp_event.h>
 #include <asm/cache.h>
-#include <asm/systemcfg.h>
 #include <asm/compat.h>
+#endif
 
 #define DEFINE(sym, val) \
 	asm volatile("\n->" #sym " %0 " #val : : "i" (val))
@@ -45,71 +53,98 @@
 
 int main(void)
 {
-	/* thread struct on stack */
-	DEFINE(THREAD_SHIFT, THREAD_SHIFT);
-	DEFINE(THREAD_SIZE, THREAD_SIZE);
-	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
-	DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count));
-	DEFINE(TI_SC_NOERR, offsetof(struct thread_info, syscall_noerror));
-
-	/* task_struct->thread */
 	DEFINE(THREAD, offsetof(struct task_struct, thread));
+	DEFINE(MM, offsetof(struct task_struct, mm));
+#ifdef CONFIG_PPC64
+	DEFINE(AUDITCONTEXT, offsetof(struct task_struct, audit_context));
+#else
+	DEFINE(THREAD_INFO, offsetof(struct task_struct, thread_info));
+	DEFINE(PTRACE, offsetof(struct task_struct, ptrace));
+#endif /* CONFIG_PPC64 */
+
+	DEFINE(KSP, offsetof(struct thread_struct, ksp));
 	DEFINE(PT_REGS, offsetof(struct thread_struct, regs));
 	DEFINE(THREAD_FPEXC_MODE, offsetof(struct thread_struct, fpexc_mode));
 	DEFINE(THREAD_FPR0, offsetof(struct thread_struct, fpr[0]));
 	DEFINE(THREAD_FPSCR, offsetof(struct thread_struct, fpscr));
-	DEFINE(KSP, offsetof(struct thread_struct, ksp));
-	DEFINE(KSP_VSID, offsetof(struct thread_struct, ksp_vsid));
-
 #ifdef CONFIG_ALTIVEC
 	DEFINE(THREAD_VR0, offsetof(struct thread_struct, vr[0]));
 	DEFINE(THREAD_VRSAVE, offsetof(struct thread_struct, vrsave));
 	DEFINE(THREAD_VSCR, offsetof(struct thread_struct, vscr));
 	DEFINE(THREAD_USED_VR, offsetof(struct thread_struct, used_vr));
 #endif /* CONFIG_ALTIVEC */
-	DEFINE(MM, offsetof(struct task_struct, mm));
-	DEFINE(AUDITCONTEXT, offsetof(struct task_struct, audit_context));
+#ifdef CONFIG_PPC64
+	DEFINE(KSP_VSID, offsetof(struct thread_struct, ksp_vsid));
+#else /* CONFIG_PPC64 */
+	DEFINE(PGDIR, offsetof(struct thread_struct, pgdir));
+	DEFINE(LAST_SYSCALL, offsetof(struct thread_struct, last_syscall));
+#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+	DEFINE(THREAD_DBCR0, offsetof(struct thread_struct, dbcr0));
+	DEFINE(PT_PTRACED, PT_PTRACED);
+#endif
+#ifdef CONFIG_SPE
+	DEFINE(THREAD_EVR0, offsetof(struct thread_struct, evr[0]));
+	DEFINE(THREAD_ACC, offsetof(struct thread_struct, acc));
+	DEFINE(THREAD_SPEFSCR, offsetof(struct thread_struct, spefscr));
+	DEFINE(THREAD_USED_SPE, offsetof(struct thread_struct, used_spe));
+#endif /* CONFIG_SPE */
+#endif /* CONFIG_PPC64 */
 
+	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
+	DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count));
+	DEFINE(TI_SC_NOERR, offsetof(struct thread_info, syscall_noerror));
+#ifdef CONFIG_PPC32
+	DEFINE(TI_TASK, offsetof(struct thread_info, task));
+	DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain));
+	DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
+#endif /* CONFIG_PPC32 */
+
+#ifdef CONFIG_PPC64
 	DEFINE(DCACHEL1LINESIZE, offsetof(struct ppc64_caches, dline_size));
 	DEFINE(DCACHEL1LOGLINESIZE, offsetof(struct ppc64_caches, log_dline_size));
 	DEFINE(DCACHEL1LINESPERPAGE, offsetof(struct ppc64_caches, dlines_per_page));
 	DEFINE(ICACHEL1LINESIZE, offsetof(struct ppc64_caches, iline_size));
 	DEFINE(ICACHEL1LOGLINESIZE, offsetof(struct ppc64_caches, log_iline_size));
 	DEFINE(ICACHEL1LINESPERPAGE, offsetof(struct ppc64_caches, ilines_per_page));
-	DEFINE(PLATFORM, offsetof(struct systemcfg, platform));
+	DEFINE(PLATFORM_LPAR, PLATFORM_LPAR);
 
 	/* paca */
-        DEFINE(PACA_SIZE, sizeof(struct paca_struct));
-        DEFINE(PACAPACAINDEX, offsetof(struct paca_struct, paca_index));
-        DEFINE(PACAPROCSTART, offsetof(struct paca_struct, cpu_start));
-        DEFINE(PACAKSAVE, offsetof(struct paca_struct, kstack));
+	DEFINE(PACA_SIZE, sizeof(struct paca_struct));
+	DEFINE(PACAPACAINDEX, offsetof(struct paca_struct, paca_index));
+	DEFINE(PACAPROCSTART, offsetof(struct paca_struct, cpu_start));
+	DEFINE(PACAKSAVE, offsetof(struct paca_struct, kstack));
 	DEFINE(PACACURRENT, offsetof(struct paca_struct, __current));
-        DEFINE(PACASAVEDMSR, offsetof(struct paca_struct, saved_msr));
-        DEFINE(PACASTABREAL, offsetof(struct paca_struct, stab_real));
-        DEFINE(PACASTABVIRT, offsetof(struct paca_struct, stab_addr));
+	DEFINE(PACASAVEDMSR, offsetof(struct paca_struct, saved_msr));
+	DEFINE(PACASTABREAL, offsetof(struct paca_struct, stab_real));
+	DEFINE(PACASTABVIRT, offsetof(struct paca_struct, stab_addr));
 	DEFINE(PACASTABRR, offsetof(struct paca_struct, stab_rr));
-        DEFINE(PACAR1, offsetof(struct paca_struct, saved_r1));
+	DEFINE(PACAR1, offsetof(struct paca_struct, saved_r1));
 	DEFINE(PACATOC, offsetof(struct paca_struct, kernel_toc));
 	DEFINE(PACAPROCENABLED, offsetof(struct paca_struct, proc_enabled));
 	DEFINE(PACASLBCACHE, offsetof(struct paca_struct, slb_cache));
 	DEFINE(PACASLBCACHEPTR, offsetof(struct paca_struct, slb_cache_ptr));
 	DEFINE(PACACONTEXTID, offsetof(struct paca_struct, context.id));
+#ifdef CONFIG_PPC_64K_PAGES
+	DEFINE(PACAPGDIR, offsetof(struct paca_struct, pgdir));
+#endif
 #ifdef CONFIG_HUGETLB_PAGE
 	DEFINE(PACALOWHTLBAREAS, offsetof(struct paca_struct, context.low_htlb_areas));
 	DEFINE(PACAHIGHHTLBAREAS, offsetof(struct paca_struct, context.high_htlb_areas));
 #endif /* CONFIG_HUGETLB_PAGE */
 	DEFINE(PACADEFAULTDECR, offsetof(struct paca_struct, default_decr));
-        DEFINE(PACA_EXGEN, offsetof(struct paca_struct, exgen));
-        DEFINE(PACA_EXMC, offsetof(struct paca_struct, exmc));
-        DEFINE(PACA_EXSLB, offsetof(struct paca_struct, exslb));
-        DEFINE(PACA_EXDSI, offsetof(struct paca_struct, exdsi));
-        DEFINE(PACAEMERGSP, offsetof(struct paca_struct, emergency_sp));
+	DEFINE(PACA_EXGEN, offsetof(struct paca_struct, exgen));
+	DEFINE(PACA_EXMC, offsetof(struct paca_struct, exmc));
+	DEFINE(PACA_EXSLB, offsetof(struct paca_struct, exslb));
+	DEFINE(PACA_EXDSI, offsetof(struct paca_struct, exdsi));
+	DEFINE(PACAEMERGSP, offsetof(struct paca_struct, emergency_sp));
 	DEFINE(PACALPPACA, offsetof(struct paca_struct, lppaca));
 	DEFINE(PACAHWCPUID, offsetof(struct paca_struct, hw_cpu_id));
+
 	DEFINE(LPPACASRR0, offsetof(struct lppaca, saved_srr0));
 	DEFINE(LPPACASRR1, offsetof(struct lppaca, saved_srr1));
 	DEFINE(LPPACAANYINT, offsetof(struct lppaca, int_dword.any_int));
 	DEFINE(LPPACADECRINT, offsetof(struct lppaca, int_dword.fields.decr_int));
+#endif /* CONFIG_PPC64 */
 
 	/* RTAS */
 	DEFINE(RTASBASE, offsetof(struct rtas_t, base));
@@ -117,15 +152,17 @@ int main(void)
 
 	/* Interrupt register frame */
 	DEFINE(STACK_FRAME_OVERHEAD, STACK_FRAME_OVERHEAD);
-
+#ifndef CONFIG_PPC64
+	DEFINE(INT_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs));
+#else /* CONFIG_PPC64 */
 	DEFINE(SWITCH_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs));
-
 	/* 288 = # of volatile regs, int & fp, for leaf routines */
 	/* which do not stack a frame.  See the PPC64 ABI.       */
 	DEFINE(INT_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs) + 288);
 	/* Create extra stack space for SRR0 and SRR1 when calling prom/rtas. */
 	DEFINE(PROM_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs) + 16);
 	DEFINE(RTAS_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs) + 16);
+#endif /* CONFIG_PPC64 */
 	DEFINE(GPR0, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[0]));
 	DEFINE(GPR1, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[1]));
 	DEFINE(GPR2, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[2]));
@@ -140,6 +177,26 @@ int main(void)
 	DEFINE(GPR11, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[11]));
 	DEFINE(GPR12, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[12]));
 	DEFINE(GPR13, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[13]));
+#ifndef CONFIG_PPC64
+	DEFINE(GPR14, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[14]));
+	DEFINE(GPR15, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[15]));
+	DEFINE(GPR16, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[16]));
+	DEFINE(GPR17, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[17]));
+	DEFINE(GPR18, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[18]));
+	DEFINE(GPR19, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[19]));
+	DEFINE(GPR20, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[20]));
+	DEFINE(GPR21, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[21]));
+	DEFINE(GPR22, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[22]));
+	DEFINE(GPR23, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[23]));
+	DEFINE(GPR24, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[24]));
+	DEFINE(GPR25, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[25]));
+	DEFINE(GPR26, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[26]));
+	DEFINE(GPR27, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[27]));
+	DEFINE(GPR28, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[28]));
+	DEFINE(GPR29, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[29]));
+	DEFINE(GPR30, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[30]));
+	DEFINE(GPR31, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[31]));
+#endif /* CONFIG_PPC64 */
 	/*
 	 * Note: these symbols include _ because they overlap with special
 	 * register names
@@ -155,15 +212,31 @@ int main(void)
 	DEFINE(ORIG_GPR3, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, orig_gpr3));
 	DEFINE(RESULT, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, result));
 	DEFINE(_TRAP, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, trap));
+#ifndef CONFIG_PPC64
+	DEFINE(_MQ, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, mq));
+	/*
+	 * The PowerPC 400-class & Book-E processors have neither the DAR
+	 * nor the DSISR SPRs. Hence, we overload them to hold the similar
+	 * DEAR and ESR SPRs for such processors.  For critical interrupts
+	 * we use them to hold SRR0 and SRR1.
+	 */
+	DEFINE(_DEAR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, dar));
+	DEFINE(_ESR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, dsisr));
+#else /* CONFIG_PPC64 */
 	DEFINE(SOFTE, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, softe));
 
 	/* These _only_ to be used with {PROM,RTAS}_FRAME_SIZE!!! */
 	DEFINE(_SRR0, STACK_FRAME_OVERHEAD+sizeof(struct pt_regs));
 	DEFINE(_SRR1, STACK_FRAME_OVERHEAD+sizeof(struct pt_regs)+8);
+#endif /* CONFIG_PPC64 */
 
 	DEFINE(CLONE_VM, CLONE_VM);
 	DEFINE(CLONE_UNTRACED, CLONE_UNTRACED);
 
+#ifndef CONFIG_PPC64
+	DEFINE(MM_PGD, offsetof(struct mm_struct, pgd));
+#endif /* ! CONFIG_PPC64 */
+
 	/* About the CPU features table */
 	DEFINE(CPU_SPEC_ENTRY_SIZE, sizeof(struct cpu_spec));
 	DEFINE(CPU_SPEC_PVR_MASK, offsetof(struct cpu_spec, pvr_mask));
@@ -171,24 +244,51 @@ int main(void)
 	DEFINE(CPU_SPEC_FEATURES, offsetof(struct cpu_spec, cpu_features));
 	DEFINE(CPU_SPEC_SETUP, offsetof(struct cpu_spec, cpu_setup));
 
-	/* systemcfg offsets for use by vdso */
-	DEFINE(CFG_TB_ORIG_STAMP, offsetof(struct systemcfg, tb_orig_stamp));
-	DEFINE(CFG_TB_TICKS_PER_SEC, offsetof(struct systemcfg, tb_ticks_per_sec));
-	DEFINE(CFG_TB_TO_XS, offsetof(struct systemcfg, tb_to_xs));
-	DEFINE(CFG_STAMP_XSEC, offsetof(struct systemcfg, stamp_xsec));
-	DEFINE(CFG_TB_UPDATE_COUNT, offsetof(struct systemcfg, tb_update_count));
-	DEFINE(CFG_TZ_MINUTEWEST, offsetof(struct systemcfg, tz_minuteswest));
-	DEFINE(CFG_TZ_DSTTIME, offsetof(struct systemcfg, tz_dsttime));
-	DEFINE(CFG_SYSCALL_MAP32, offsetof(struct systemcfg, syscall_map_32));
-	DEFINE(CFG_SYSCALL_MAP64, offsetof(struct systemcfg, syscall_map_64));
+#ifndef CONFIG_PPC64
+	DEFINE(pbe_address, offsetof(struct pbe, address));
+	DEFINE(pbe_orig_address, offsetof(struct pbe, orig_address));
+	DEFINE(pbe_next, offsetof(struct pbe, next));
 
-	/* timeval/timezone offsets for use by vdso */
+	DEFINE(TASK_SIZE, TASK_SIZE);
+	DEFINE(NUM_USER_SEGMENTS, TASK_SIZE>>28);
+#endif /* ! CONFIG_PPC64 */
+
+	/* datapage offsets for use by vdso */
+	DEFINE(CFG_TB_ORIG_STAMP, offsetof(struct vdso_data, tb_orig_stamp));
+	DEFINE(CFG_TB_TICKS_PER_SEC, offsetof(struct vdso_data, tb_ticks_per_sec));
+	DEFINE(CFG_TB_TO_XS, offsetof(struct vdso_data, tb_to_xs));
+	DEFINE(CFG_STAMP_XSEC, offsetof(struct vdso_data, stamp_xsec));
+	DEFINE(CFG_TB_UPDATE_COUNT, offsetof(struct vdso_data, tb_update_count));
+	DEFINE(CFG_TZ_MINUTEWEST, offsetof(struct vdso_data, tz_minuteswest));
+	DEFINE(CFG_TZ_DSTTIME, offsetof(struct vdso_data, tz_dsttime));
+	DEFINE(CFG_SYSCALL_MAP32, offsetof(struct vdso_data, syscall_map_32));
+	DEFINE(WTOM_CLOCK_SEC, offsetof(struct vdso_data, wtom_clock_sec));
+	DEFINE(WTOM_CLOCK_NSEC, offsetof(struct vdso_data, wtom_clock_nsec));
+#ifdef CONFIG_PPC64
+	DEFINE(CFG_SYSCALL_MAP64, offsetof(struct vdso_data, syscall_map_64));
 	DEFINE(TVAL64_TV_SEC, offsetof(struct timeval, tv_sec));
 	DEFINE(TVAL64_TV_USEC, offsetof(struct timeval, tv_usec));
 	DEFINE(TVAL32_TV_SEC, offsetof(struct compat_timeval, tv_sec));
 	DEFINE(TVAL32_TV_USEC, offsetof(struct compat_timeval, tv_usec));
+	DEFINE(TSPC64_TV_SEC, offsetof(struct timespec, tv_sec));
+	DEFINE(TSPC64_TV_NSEC, offsetof(struct timespec, tv_nsec));
+	DEFINE(TSPC32_TV_SEC, offsetof(struct compat_timespec, tv_sec));
+	DEFINE(TSPC32_TV_NSEC, offsetof(struct compat_timespec, tv_nsec));
+#else
+	DEFINE(TVAL32_TV_SEC, offsetof(struct timeval, tv_sec));
+	DEFINE(TVAL32_TV_USEC, offsetof(struct timeval, tv_usec));
+	DEFINE(TSPC32_TV_SEC, offsetof(struct timespec, tv_sec));
+	DEFINE(TSPC32_TV_NSEC, offsetof(struct timespec, tv_nsec));
+#endif
+	/* timeval/timezone offsets for use by vdso */
 	DEFINE(TZONE_TZ_MINWEST, offsetof(struct timezone, tz_minuteswest));
 	DEFINE(TZONE_TZ_DSTTIME, offsetof(struct timezone, tz_dsttime));
 
+	/* Other bits used by the vdso */
+	DEFINE(CLOCK_REALTIME, CLOCK_REALTIME);
+	DEFINE(CLOCK_MONOTONIC, CLOCK_MONOTONIC);
+	DEFINE(NSEC_PER_SEC, NSEC_PER_SEC);
+	DEFINE(CLOCK_REALTIME_RES, TICK_NSEC);
+
 	return 0;
 }
diff --git a/arch/ppc64/kernel/binfmt_elf32.c b/arch/powerpc/kernel/binfmt_elf32.c
index fadc699a0497..8ad6b0f33651 100644
--- a/arch/ppc64/kernel/binfmt_elf32.c
+++ b/arch/powerpc/kernel/binfmt_elf32.c
@@ -70,9 +70,6 @@ cputime_to_compat_timeval(const cputime_t cputime, struct compat_timeval *value)
 	value->tv_sec = jiffies / HZ;
 }
 
-extern void start_thread32(struct pt_regs *, unsigned long, unsigned long);
-#undef start_thread
-#define start_thread start_thread32
 #define init_elf_binfmt init_elf32_binfmt
 
 #include "../../../fs/binfmt_elf.c"
diff --git a/arch/ppc64/kernel/btext.c b/arch/powerpc/kernel/btext.c
index b6fbfbe9032d..bdfba92b2b38 100644
--- a/arch/ppc64/kernel/btext.c
+++ b/arch/powerpc/kernel/btext.c
@@ -7,6 +7,7 @@
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/init.h>
+#include <linux/module.h>
 
 #include <asm/sections.h>
 #include <asm/prom.h>
@@ -19,7 +20,7 @@
 #include <asm/lmb.h>
 #include <asm/processor.h>
 
-#undef NO_SCROLL
+#define NO_SCROLL
 
 #ifndef NO_SCROLL
 static void scrollscreen(void);
@@ -49,6 +50,71 @@ static unsigned char vga_font[cmapsz];
 int boot_text_mapped;
 int force_printk_to_btext = 0;
 
+#ifdef CONFIG_PPC32
+/* Calc BAT values for mapping the display and store them
+ * in disp_BAT.  Those values are then used from head.S to map
+ * the display during identify_machine() and MMU_Init()
+ *
+ * The display is mapped to virtual address 0xD0000000, rather
+ * than 1:1, because some some CHRP machines put the frame buffer
+ * in the region starting at 0xC0000000 (KERNELBASE).
+ * This mapping is temporary and will disappear as soon as the
+ * setup done by MMU_Init() is applied.
+ *
+ * For now, we align the BAT and then map 8Mb on 601 and 16Mb
+ * on other PPCs. This may cause trouble if the framebuffer
+ * is really badly aligned, but I didn't encounter this case
+ * yet.
+ */
+void __init
+btext_prepare_BAT(void)
+{
+	unsigned long vaddr = KERNELBASE + 0x10000000;
+	unsigned long addr;
+	unsigned long lowbits;
+
+	addr = (unsigned long)dispDeviceBase;
+	if (!addr) {
+		boot_text_mapped = 0;
+		return;
+	}
+	if (PVR_VER(mfspr(SPRN_PVR)) != 1) {
+		/* 603, 604, G3, G4, ... */
+		lowbits = addr & ~0xFF000000UL;
+		addr &= 0xFF000000UL;
+		disp_BAT[0] = vaddr | (BL_16M<<2) | 2;
+		disp_BAT[1] = addr | (_PAGE_NO_CACHE | _PAGE_GUARDED | BPP_RW);	
+	} else {
+		/* 601 */
+		lowbits = addr & ~0xFF800000UL;
+		addr &= 0xFF800000UL;
+		disp_BAT[0] = vaddr | (_PAGE_NO_CACHE | PP_RWXX) | 4;
+		disp_BAT[1] = addr | BL_8M | 0x40;
+	}
+	logicalDisplayBase = (void *) (vaddr + lowbits);
+}
+#endif
+
+/* This function will enable the early boot text when doing OF booting. This
+ * way, xmon output should work too
+ */
+void __init
+btext_setup_display(int width, int height, int depth, int pitch,
+		    unsigned long address)
+{
+	g_loc_X = 0;
+	g_loc_Y = 0;
+	g_max_loc_X = width / 8;
+	g_max_loc_Y = height / 16;
+	logicalDisplayBase = (unsigned char *)address;
+	dispDeviceBase = (unsigned char *)address;
+	dispDeviceRowBytes = pitch;
+	dispDeviceDepth = depth;
+	dispDeviceRect[0] = dispDeviceRect[1] = 0;
+	dispDeviceRect[2] = width;
+	dispDeviceRect[3] = height;
+	boot_text_mapped = 1;
+}
 
 /* Here's a small text engine to use during early boot
  * or for debugging purposes
@@ -131,6 +197,40 @@ int btext_initialize(struct device_node *np)
 	return 0;
 }
 
+void __init init_boot_display(void)
+{
+	char *name;
+	struct device_node *np = NULL; 
+	int rc = -ENODEV;
+
+	printk("trying to initialize btext ...\n");
+
+	name = (char *)get_property(of_chosen, "linux,stdout-path", NULL);
+	if (name != NULL) {
+		np = of_find_node_by_path(name);
+		if (np != NULL) {
+			if (strcmp(np->type, "display") != 0) {
+				printk("boot stdout isn't a display !\n");
+				of_node_put(np);
+				np = NULL;
+			}
+		}
+	}
+	if (np)
+		rc = btext_initialize(np);
+	if (rc == 0)
+		return;
+
+	for (np = NULL; (np = of_find_node_by_type(np, "display"));) {
+		if (get_property(np, "linux,opened", NULL)) {
+			printk("trying %s ...\n", np->full_name);
+			rc = btext_initialize(np);
+			printk("result: %d\n", rc);
+		}
+		if (rc == 0)
+			return;
+	}
+}
 
 /* Calc the base address of a given point (x,y) */
 static unsigned char * calc_base(int x, int y)
@@ -173,6 +273,7 @@ void btext_update_display(unsigned long phys, int width, int height,
 	g_max_loc_X = width / 8;
 	g_max_loc_Y = height / 16;
 }
+EXPORT_SYMBOL(btext_update_display);
 
 void btext_clearscreen(void)
 {
@@ -282,6 +383,7 @@ void btext_drawhex(unsigned long v)
 
 	if (!boot_text_mapped)
 		return;
+#ifdef CONFIG_PPC64
 	btext_drawchar(hex_table[(v >> 60) & 0x0000000FUL]);
 	btext_drawchar(hex_table[(v >> 56) & 0x0000000FUL]);
 	btext_drawchar(hex_table[(v >> 52) & 0x0000000FUL]);
@@ -290,6 +392,7 @@ void btext_drawhex(unsigned long v)
 	btext_drawchar(hex_table[(v >> 40) & 0x0000000FUL]);
 	btext_drawchar(hex_table[(v >> 36) & 0x0000000FUL]);
 	btext_drawchar(hex_table[(v >> 32) & 0x0000000FUL]);
+#endif
 	btext_drawchar(hex_table[(v >> 28) & 0x0000000FUL]);
 	btext_drawchar(hex_table[(v >> 24) & 0x0000000FUL]);
 	btext_drawchar(hex_table[(v >> 20) & 0x0000000FUL]);
diff --git a/arch/ppc64/kernel/cpu_setup_power4.S b/arch/powerpc/kernel/cpu_setup_power4.S
index 1fb673c511ff..cca942fe6115 100644
--- a/arch/ppc64/kernel/cpu_setup_power4.S
+++ b/arch/powerpc/kernel/cpu_setup_power4.S
@@ -114,11 +114,11 @@ _GLOBAL(__setup_cpu_ppc970)
 
 	.data
 	.balign	L1_CACHE_BYTES,0
-cpu_state_storage:	
+cpu_state_storage:
 	.space	CS_SIZE
 	.balign	L1_CACHE_BYTES,0
 	.text
-	
+
 /* Called in normal context to backup CPU 0 state. This
  * does not include cache settings. This function is also
  * called for machine sleep. This does not include the MMU
@@ -151,7 +151,7 @@ _GLOBAL(__save_cpu_setup)
 	std	r3,CS_HID4(r5)
 	mfspr	r3,SPRN_HID5
 	std	r3,CS_HID5(r5)
-	
+
 2:
 	mtcr	r7
 	blr
@@ -213,7 +213,7 @@ _GLOBAL(__restore_cpu_setup)
 	mtspr	SPRN_HID1,r3
 	sync
 	isync
-	
+
 	/* Restore HID4 */
 	ld	r3,CS_HID4(r5)
 	sync
diff --git a/arch/ppc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 546e1ea4cafa..1d85cedbbb7b 100644
--- a/arch/ppc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1,8 +1,9 @@
 /*
- *  arch/ppc/kernel/cputable.c
- *
  *  Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org)
  *
+ *  Modifications for ppc64:
+ *      Copyright (C) 2003 Dave Engebretsen <engebret@us.ibm.com>
+ *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
  *  as published by the Free Software Foundation; either version
@@ -14,96 +15,305 @@
 #include <linux/sched.h>
 #include <linux/threads.h>
 #include <linux/init.h>
-#include <asm/cputable.h>
+#include <linux/module.h>
 
-struct cpu_spec* cur_cpu_spec[NR_CPUS];
+#include <asm/oprofile_impl.h>
+#include <asm/cputable.h>
 
-extern void __setup_cpu_601(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
-extern void __setup_cpu_603(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
-extern void __setup_cpu_604(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
-extern void __setup_cpu_750(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
-extern void __setup_cpu_750cx(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
-extern void __setup_cpu_750fx(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
-extern void __setup_cpu_7400(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
-extern void __setup_cpu_7410(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
-extern void __setup_cpu_745x(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
-extern void __setup_cpu_power3(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
-extern void __setup_cpu_power4(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
-extern void __setup_cpu_ppc970(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
-extern void __setup_cpu_generic(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
+struct cpu_spec* cur_cpu_spec = NULL;
+EXPORT_SYMBOL(cur_cpu_spec);
 
-#define CLASSIC_PPC (!defined(CONFIG_8xx) && !defined(CONFIG_4xx) && \
-		     !defined(CONFIG_POWER3) && !defined(CONFIG_POWER4) && \
-		     !defined(CONFIG_BOOKE))
+/* NOTE:
+ * Unlike ppc32, ppc64 will only call this once for the boot CPU, it's
+ * the responsibility of the appropriate CPU save/restore functions to
+ * eventually copy these settings over. Those save/restore aren't yet
+ * part of the cputable though. That has to be fixed for both ppc32
+ * and ppc64
+ */
+#ifdef CONFIG_PPC64
+extern void __setup_cpu_power3(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_power4(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_be(unsigned long offset, struct cpu_spec* spec);
+#else
+extern void __setup_cpu_603(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_604(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_750(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_750cx(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_750fx(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_7400(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_7410(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_745x(unsigned long offset, struct cpu_spec* spec);
+#endif /* CONFIG_PPC32 */
+extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec);
 
 /* This table only contains "desktop" CPUs, it need to be filled with embedded
  * ones as well...
  */
-#define COMMON_PPC	(PPC_FEATURE_32 | PPC_FEATURE_HAS_FPU | \
-			 PPC_FEATURE_HAS_MMU)
+#define COMMON_USER		(PPC_FEATURE_32 | PPC_FEATURE_HAS_FPU | \
+				 PPC_FEATURE_HAS_MMU)
+#define COMMON_USER_PPC64	(COMMON_USER | PPC_FEATURE_64)
+#define COMMON_USER_POWER4	(COMMON_USER_PPC64 | PPC_FEATURE_POWER4)
+#define COMMON_USER_POWER5	(COMMON_USER_PPC64 | PPC_FEATURE_POWER5)
+#define COMMON_USER_POWER5_PLUS	(COMMON_USER_PPC64 | PPC_FEATURE_POWER5_PLUS)
 
-/* We only set the altivec features if the kernel was compiled with altivec
- * support
- */
-#ifdef CONFIG_ALTIVEC
-#define CPU_FTR_ALTIVEC_COMP		CPU_FTR_ALTIVEC
-#define PPC_FEATURE_ALTIVEC_COMP    	PPC_FEATURE_HAS_ALTIVEC
-#else
-#define CPU_FTR_ALTIVEC_COMP		0
-#define PPC_FEATURE_ALTIVEC_COMP       	0
-#endif
 
 /* We only set the spe features if the kernel was compiled with
  * spe support
  */
 #ifdef CONFIG_SPE
-#define PPC_FEATURE_SPE_COMP    	PPC_FEATURE_HAS_SPE
+#define PPC_FEATURE_SPE_COMP	PPC_FEATURE_HAS_SPE
 #else
-#define PPC_FEATURE_SPE_COMP       	0
+#define PPC_FEATURE_SPE_COMP	0
 #endif
 
-/* We need to mark all pages as being coherent if we're SMP or we
- * have a 74[45]x and an MPC107 host bridge.
- */
-#if defined(CONFIG_SMP) || defined(CONFIG_MPC10X_BRIDGE)
-#define CPU_FTR_COMMON                  CPU_FTR_NEED_COHERENT
-#else
-#define CPU_FTR_COMMON                  0
+struct cpu_spec	cpu_specs[] = {
+#ifdef CONFIG_PPC64
+	{	/* Power3 */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x00400000,
+		.cpu_name		= "POWER3 (630)",
+		.cpu_features		= CPU_FTRS_POWER3,
+		.cpu_user_features	= COMMON_USER_PPC64,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.num_pmcs		= 8,
+		.cpu_setup		= __setup_cpu_power3,
+#ifdef CONFIG_OPROFILE
+		.oprofile_cpu_type	= "ppc64/power3",
+		.oprofile_model		= &op_model_rs64,
 #endif
-
-/* The powersave features NAP & DOZE seems to confuse BDI when
-   debugging. So if a BDI is used, disable theses
- */
-#ifndef CONFIG_BDI_SWITCH
-#define CPU_FTR_MAYBE_CAN_DOZE	CPU_FTR_CAN_DOZE
-#define CPU_FTR_MAYBE_CAN_NAP	CPU_FTR_CAN_NAP
+	},
+	{	/* Power3+ */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x00410000,
+		.cpu_name		= "POWER3 (630+)",
+		.cpu_features		= CPU_FTRS_POWER3,
+		.cpu_user_features	= COMMON_USER_PPC64,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.num_pmcs		= 8,
+		.cpu_setup		= __setup_cpu_power3,
+#ifdef CONFIG_OPROFILE
+		.oprofile_cpu_type	= "ppc64/power3",
+		.oprofile_model		= &op_model_rs64,
+#endif
+	},
+	{	/* Northstar */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x00330000,
+		.cpu_name		= "RS64-II (northstar)",
+		.cpu_features		= CPU_FTRS_RS64,
+		.cpu_user_features	= COMMON_USER_PPC64,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.num_pmcs		= 8,
+		.cpu_setup		= __setup_cpu_power3,
+#ifdef CONFIG_OPROFILE
+		.oprofile_cpu_type	= "ppc64/rs64",
+		.oprofile_model		= &op_model_rs64,
+#endif
+	},
+	{	/* Pulsar */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x00340000,
+		.cpu_name		= "RS64-III (pulsar)",
+		.cpu_features		= CPU_FTRS_RS64,
+		.cpu_user_features	= COMMON_USER_PPC64,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.num_pmcs		= 8,
+		.cpu_setup		= __setup_cpu_power3,
+#ifdef CONFIG_OPROFILE
+		.oprofile_cpu_type	= "ppc64/rs64",
+		.oprofile_model		= &op_model_rs64,
+#endif
+	},
+	{	/* I-star */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x00360000,
+		.cpu_name		= "RS64-III (icestar)",
+		.cpu_features		= CPU_FTRS_RS64,
+		.cpu_user_features	= COMMON_USER_PPC64,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.num_pmcs		= 8,
+		.cpu_setup		= __setup_cpu_power3,
+#ifdef CONFIG_OPROFILE
+		.oprofile_cpu_type	= "ppc64/rs64",
+		.oprofile_model		= &op_model_rs64,
+#endif
+	},
+	{	/* S-star */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x00370000,
+		.cpu_name		= "RS64-IV (sstar)",
+		.cpu_features		= CPU_FTRS_RS64,
+		.cpu_user_features	= COMMON_USER_PPC64,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.num_pmcs		= 8,
+		.cpu_setup		= __setup_cpu_power3,
+#ifdef CONFIG_OPROFILE
+		.oprofile_cpu_type	= "ppc64/rs64",
+		.oprofile_model		= &op_model_rs64,
+#endif
+	},
+	{	/* Power4 */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x00350000,
+		.cpu_name		= "POWER4 (gp)",
+		.cpu_features		= CPU_FTRS_POWER4,
+		.cpu_user_features	= COMMON_USER_POWER4,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.num_pmcs		= 8,
+		.cpu_setup		= __setup_cpu_power4,
+#ifdef CONFIG_OPROFILE
+		.oprofile_cpu_type	= "ppc64/power4",
+		.oprofile_model		= &op_model_rs64,
+#endif
+	},
+	{	/* Power4+ */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x00380000,
+		.cpu_name		= "POWER4+ (gq)",
+		.cpu_features		= CPU_FTRS_POWER4,
+		.cpu_user_features	= COMMON_USER_POWER4,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.num_pmcs		= 8,
+		.cpu_setup		= __setup_cpu_power4,
+#ifdef CONFIG_OPROFILE
+		.oprofile_cpu_type	= "ppc64/power4",
+		.oprofile_model		= &op_model_power4,
+#endif
+	},
+	{	/* PPC970 */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x00390000,
+		.cpu_name		= "PPC970",
+		.cpu_features		= CPU_FTRS_PPC970,
+		.cpu_user_features	= COMMON_USER_POWER4 |
+			PPC_FEATURE_HAS_ALTIVEC_COMP,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.num_pmcs		= 8,
+		.cpu_setup		= __setup_cpu_ppc970,
+#ifdef CONFIG_OPROFILE
+		.oprofile_cpu_type	= "ppc64/970",
+		.oprofile_model		= &op_model_power4,
+#endif
+	},
+#endif /* CONFIG_PPC64 */
+#if defined(CONFIG_PPC64) || defined(CONFIG_POWER4)
+	{	/* PPC970FX */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x003c0000,
+		.cpu_name		= "PPC970FX",
+#ifdef CONFIG_PPC32
+		.cpu_features		= CPU_FTRS_970_32,
 #else
-#define CPU_FTR_MAYBE_CAN_DOZE	0
-#define CPU_FTR_MAYBE_CAN_NAP	0
+		.cpu_features		= CPU_FTRS_PPC970,
 #endif
-
-struct cpu_spec	cpu_specs[] = {
+		.cpu_user_features	= COMMON_USER_POWER4 |
+			PPC_FEATURE_HAS_ALTIVEC_COMP,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.num_pmcs		= 8,
+		.cpu_setup		= __setup_cpu_ppc970,
+#ifdef CONFIG_OPROFILE
+		.oprofile_cpu_type	= "ppc64/970",
+		.oprofile_model		= &op_model_power4,
+#endif
+	},
+#endif /* defined(CONFIG_PPC64) || defined(CONFIG_POWER4) */
+#ifdef CONFIG_PPC64
+	{	/* PPC970MP */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x00440000,
+		.cpu_name		= "PPC970MP",
+		.cpu_features		= CPU_FTRS_PPC970,
+		.cpu_user_features	= COMMON_USER_POWER4 |
+			PPC_FEATURE_HAS_ALTIVEC_COMP,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.cpu_setup		= __setup_cpu_ppc970,
+#ifdef CONFIG_OPROFILE
+		.oprofile_cpu_type	= "ppc64/970",
+		.oprofile_model		= &op_model_power4,
+#endif
+	},
+	{	/* Power5 GR */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x003a0000,
+		.cpu_name		= "POWER5 (gr)",
+		.cpu_features		= CPU_FTRS_POWER5,
+		.cpu_user_features	= COMMON_USER_POWER5,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.num_pmcs		= 6,
+		.cpu_setup		= __setup_cpu_power4,
+#ifdef CONFIG_OPROFILE
+		.oprofile_cpu_type	= "ppc64/power5",
+		.oprofile_model		= &op_model_power4,
+#endif
+	},
+	{	/* Power5 GS */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x003b0000,
+		.cpu_name		= "POWER5 (gs)",
+		.cpu_features		= CPU_FTRS_POWER5,
+		.cpu_user_features	= COMMON_USER_POWER5_PLUS,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.num_pmcs		= 6,
+		.cpu_setup		= __setup_cpu_power4,
+#ifdef CONFIG_OPROFILE
+		.oprofile_cpu_type	= "ppc64/power5",
+		.oprofile_model		= &op_model_power4,
+#endif
+	},
+	{	/* BE DD1.x */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x00700000,
+		.cpu_name		= "Cell Broadband Engine",
+		.cpu_features		= CPU_FTRS_CELL,
+		.cpu_user_features	= COMMON_USER_PPC64 |
+			PPC_FEATURE_CELL | PPC_FEATURE_HAS_ALTIVEC_COMP,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.cpu_setup		= __setup_cpu_be,
+	},
+	{	/* default match */
+		.pvr_mask		= 0x00000000,
+		.pvr_value		= 0x00000000,
+		.cpu_name		= "POWER4 (compatible)",
+		.cpu_features		= CPU_FTRS_COMPATIBLE,
+		.cpu_user_features	= COMMON_USER_PPC64,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.num_pmcs		= 6,
+		.cpu_setup		= __setup_cpu_power4,
+	}
+#endif	/* CONFIG_PPC64 */
+#ifdef CONFIG_PPC32
 #if CLASSIC_PPC
-	{ 	/* 601 */
+	{	/* 601 */
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x00010000,
 		.cpu_name		= "601",
-		.cpu_features		= CPU_FTR_COMMON | CPU_FTR_601 |
-			CPU_FTR_HPTE_TABLE,
-		.cpu_user_features 	= COMMON_PPC | PPC_FEATURE_601_INSTR |
-			PPC_FEATURE_UNIFIED_CACHE,
+		.cpu_features		= CPU_FTRS_PPC601,
+		.cpu_user_features	= COMMON_USER | PPC_FEATURE_601_INSTR |
+			PPC_FEATURE_UNIFIED_CACHE | PPC_FEATURE_NO_TB,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
-		.cpu_setup		= __setup_cpu_601
 	},
 	{	/* 603 */
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x00030000,
 		.cpu_name		= "603",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
-			CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP,
-		.cpu_user_features	= COMMON_PPC,
+		.cpu_features		= CPU_FTRS_603,
+		.cpu_user_features	= COMMON_USER,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.cpu_setup		= __setup_cpu_603
@@ -112,10 +322,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x00060000,
 		.cpu_name		= "603e",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
-			CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP,
-		.cpu_user_features	= COMMON_PPC,
+		.cpu_features		= CPU_FTRS_603,
+		.cpu_user_features	= COMMON_USER,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.cpu_setup		= __setup_cpu_603
@@ -124,10 +332,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x00070000,
 		.cpu_name		= "603ev",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
-			CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP,
-		.cpu_user_features	= COMMON_PPC,
+		.cpu_features		= CPU_FTRS_603,
+		.cpu_user_features	= COMMON_USER,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.cpu_setup		= __setup_cpu_603
@@ -136,10 +342,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x00040000,
 		.cpu_name		= "604",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
-			CPU_FTR_604_PERF_MON | CPU_FTR_HPTE_TABLE,
-		.cpu_user_features	= COMMON_PPC,
+		.cpu_features		= CPU_FTRS_604,
+		.cpu_user_features	= COMMON_USER,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 2,
@@ -149,10 +353,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xfffff000,
 		.pvr_value		= 0x00090000,
 		.cpu_name		= "604e",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
-			CPU_FTR_604_PERF_MON | CPU_FTR_HPTE_TABLE,
-		.cpu_user_features	= COMMON_PPC,
+		.cpu_features		= CPU_FTRS_604,
+		.cpu_user_features	= COMMON_USER,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
@@ -162,10 +364,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x00090000,
 		.cpu_name		= "604r",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
-			CPU_FTR_604_PERF_MON | CPU_FTR_HPTE_TABLE,
-		.cpu_user_features	= COMMON_PPC,
+		.cpu_features		= CPU_FTRS_604,
+		.cpu_user_features	= COMMON_USER,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
@@ -175,10 +375,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x000a0000,
 		.cpu_name		= "604ev",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
-			CPU_FTR_604_PERF_MON | CPU_FTR_HPTE_TABLE,
-		.cpu_user_features	= COMMON_PPC,
+		.cpu_features		= CPU_FTRS_604,
+		.cpu_user_features	= COMMON_USER,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
@@ -188,11 +386,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffffffff,
 		.pvr_value		= 0x00084202,
 		.cpu_name		= "740/750",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
-			CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_HPTE_TABLE |
-			CPU_FTR_MAYBE_CAN_NAP,
-		.cpu_user_features	= COMMON_PPC,
+		.cpu_features		= CPU_FTRS_740_NOTAU,
+		.cpu_user_features	= COMMON_USER,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
@@ -202,11 +397,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xfffffff0,
 		.pvr_value		= 0x00080100,
 		.cpu_name		= "750CX",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
-			CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_TAU |
-			CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP,
-		.cpu_user_features	= COMMON_PPC,
+		.cpu_features		= CPU_FTRS_750,
+		.cpu_user_features	= COMMON_USER,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
@@ -216,11 +408,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xfffffff0,
 		.pvr_value		= 0x00082200,
 		.cpu_name		= "750CX",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
-			CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_TAU |
-			CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP,
-		.cpu_user_features	= COMMON_PPC,
+		.cpu_features		= CPU_FTRS_750,
+		.cpu_user_features	= COMMON_USER,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
@@ -230,11 +419,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xfffffff0,
 		.pvr_value		= 0x00082210,
 		.cpu_name		= "750CXe",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
-			CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_TAU |
-			CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP,
-		.cpu_user_features	= COMMON_PPC,
+		.cpu_features		= CPU_FTRS_750,
+		.cpu_user_features	= COMMON_USER,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
@@ -244,11 +430,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffffffff,
 		.pvr_value		= 0x00083214,
 		.cpu_name		= "750CXe",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
-			CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_TAU |
-			CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP,
-		.cpu_user_features	= COMMON_PPC,
+		.cpu_features		= CPU_FTRS_750,
+		.cpu_user_features	= COMMON_USER,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
@@ -258,11 +441,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xfffff000,
 		.pvr_value		= 0x00083000,
 		.cpu_name		= "745/755",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
-			CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_TAU |
-			CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP,
-		.cpu_user_features	= COMMON_PPC,
+		.cpu_features		= CPU_FTRS_750,
+		.cpu_user_features	= COMMON_USER,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
@@ -272,12 +452,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffffff00,
 		.pvr_value		= 0x70000100,
 		.cpu_name		= "750FX",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
-			CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_TAU |
-			CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP |
-			CPU_FTR_DUAL_PLL_750FX | CPU_FTR_NO_DPM,
-		.cpu_user_features	= COMMON_PPC,
+		.cpu_features		= CPU_FTRS_750FX1,
+		.cpu_user_features	= COMMON_USER,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
@@ -287,12 +463,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffffffff,
 		.pvr_value		= 0x70000200,
 		.cpu_name		= "750FX",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
-			CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_TAU |
-			CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP |
-			CPU_FTR_NO_DPM,
-		.cpu_user_features	= COMMON_PPC,
+		.cpu_features		= CPU_FTRS_750FX2,
+		.cpu_user_features	= COMMON_USER,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
@@ -302,12 +474,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x70000000,
 		.cpu_name		= "750FX",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
-			CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_TAU |
-			CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP |
-			CPU_FTR_DUAL_PLL_750FX | CPU_FTR_HAS_HIGH_BATS,
-		.cpu_user_features	= COMMON_PPC,
+		.cpu_features		= CPU_FTRS_750FX,
+		.cpu_user_features	= COMMON_USER,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
@@ -317,12 +485,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x70020000,
 		.cpu_name		= "750GX",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB |
-			CPU_FTR_L2CR | CPU_FTR_TAU | CPU_FTR_HPTE_TABLE |
-			CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_DUAL_PLL_750FX |
-			CPU_FTR_HAS_HIGH_BATS,
-		.cpu_user_features	= COMMON_PPC,
+		.cpu_features		= CPU_FTRS_750GX,
+		.cpu_user_features	= COMMON_USER,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
@@ -332,11 +496,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x00080000,
 		.cpu_name		= "740/750",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
-			CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_TAU |
-			CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP,
-		.cpu_user_features	= COMMON_PPC,
+		.cpu_features		= CPU_FTRS_740,
+		.cpu_user_features	= COMMON_USER,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
@@ -346,11 +507,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffffffff,
 		.pvr_value		= 0x000c1101,
 		.cpu_name		= "7400 (1.1)",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
-			CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP |
-			CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP,
-		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_ALTIVEC_COMP,
+		.cpu_features		= CPU_FTRS_7400_NOTAU,
+		.cpu_user_features	= COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
@@ -360,12 +518,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x000c0000,
 		.cpu_name		= "7400",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
-			CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_TAU |
-			CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE |
-			CPU_FTR_MAYBE_CAN_NAP,
-		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_ALTIVEC_COMP,
+		.cpu_features		= CPU_FTRS_7400,
+		.cpu_user_features	= COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
@@ -375,12 +529,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x800c0000,
 		.cpu_name		= "7410",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
-			CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_TAU |
-			CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE |
-			CPU_FTR_MAYBE_CAN_NAP,
-		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_ALTIVEC_COMP,
+		.cpu_features		= CPU_FTRS_7400,
+		.cpu_user_features	= COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
@@ -390,12 +540,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffffffff,
 		.pvr_value		= 0x80000200,
 		.cpu_name		= "7450",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
-			CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
-			CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 |
-			CPU_FTR_NEED_COHERENT,
-		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_ALTIVEC_COMP,
+		.cpu_features		= CPU_FTRS_7450_20,
+		.cpu_user_features	= COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 6,
@@ -405,14 +551,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffffffff,
 		.pvr_value		= 0x80000201,
 		.cpu_name		= "7450",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
-			CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR |
-			CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
-			CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 |
-			CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_L3_DISABLE_NAP |
-			CPU_FTR_NEED_COHERENT,
-		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_ALTIVEC_COMP,
+		.cpu_features		= CPU_FTRS_7450_21,
+		.cpu_user_features	= COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 6,
@@ -422,13 +562,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x80000000,
 		.cpu_name		= "7450",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
-			CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR |
-			CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
-			CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 |
-			CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_NEED_COHERENT,
-		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_ALTIVEC_COMP,
+		.cpu_features		= CPU_FTRS_7450_23,
+		.cpu_user_features	= COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 6,
@@ -438,12 +573,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffffff00,
 		.pvr_value		= 0x80010100,
 		.cpu_name		= "7455",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
-			CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
-			CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 |
-			CPU_FTR_HAS_HIGH_BATS | CPU_FTR_NEED_COHERENT,
-		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_ALTIVEC_COMP,
+		.cpu_features		= CPU_FTRS_7455_1,
+		.cpu_user_features	= COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 6,
@@ -453,14 +584,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffffffff,
 		.pvr_value		= 0x80010200,
 		.cpu_name		= "7455",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
-			CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR |
-			CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
-			CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 |
-			CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_L3_DISABLE_NAP |
-			CPU_FTR_NEED_COHERENT | CPU_FTR_HAS_HIGH_BATS,
-		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_ALTIVEC_COMP,
+		.cpu_features		= CPU_FTRS_7455_20,
+		.cpu_user_features	= COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 6,
@@ -470,14 +595,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x80010000,
 		.cpu_name		= "7455",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
-			CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR |
-			CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
-			CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 |
-			CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS |
-			CPU_FTR_NEED_COHERENT,
-		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_ALTIVEC_COMP,
+		.cpu_features		= CPU_FTRS_7455,
+		.cpu_user_features	= COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 6,
@@ -487,14 +606,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffffffff,
 		.pvr_value		= 0x80020100,
 		.cpu_name		= "7447/7457",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
-			CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR |
-			CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
-			CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 |
-			CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS |
-			CPU_FTR_NEED_COHERENT | CPU_FTR_NO_BTIC,
-		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_ALTIVEC_COMP,
+		.cpu_features		= CPU_FTRS_7447_10,
+		.cpu_user_features	= COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 6,
@@ -504,14 +617,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffffffff,
 		.pvr_value		= 0x80020101,
 		.cpu_name		= "7447/7457",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
-			CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR |
-			CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
-			CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 |
-			CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS |
-			CPU_FTR_NEED_COHERENT | CPU_FTR_NO_BTIC,
-		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_ALTIVEC_COMP,
+		.cpu_features		= CPU_FTRS_7447_10,
+		.cpu_user_features	= COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 6,
@@ -521,14 +628,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x80020000,
 		.cpu_name		= "7447/7457",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
-			CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR |
-			CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
-			CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 |
-			CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS |
-			CPU_FTR_NEED_COHERENT,
-		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_ALTIVEC_COMP,
+		.cpu_features		= CPU_FTRS_7447,
+		.cpu_user_features	= COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 6,
@@ -538,13 +639,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x80030000,
 		.cpu_name		= "7447A",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
-			CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR |
-			CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE |
-			CPU_FTR_SPEC7450 | CPU_FTR_NAP_DISABLE_L2_PR |
-			CPU_FTR_HAS_HIGH_BATS | CPU_FTR_NEED_COHERENT,
-		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_ALTIVEC_COMP,
+		.cpu_features		= CPU_FTRS_7447A,
+		.cpu_user_features	= COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 6,
@@ -554,13 +650,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x80040000,
 		.cpu_name		= "7448",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
-			CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR |
-			CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE |
-			CPU_FTR_SPEC7450 | CPU_FTR_NAP_DISABLE_L2_PR |
-			CPU_FTR_HAS_HIGH_BATS | CPU_FTR_NEED_COHERENT,
-		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_ALTIVEC_COMP,
+		.cpu_features		= CPU_FTRS_7447A,
+		.cpu_user_features	= COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 6,
@@ -570,10 +661,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0x7fff0000,
 		.pvr_value		= 0x00810000,
 		.cpu_name		= "82xx",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
-			CPU_FTR_USE_TB,
-		.cpu_user_features	= COMMON_PPC,
+		.cpu_features		= CPU_FTRS_82XX,
+		.cpu_user_features	= COMMON_USER,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.cpu_setup		= __setup_cpu_603
@@ -582,10 +671,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0x7fff0000,
 		.pvr_value		= 0x00820000,
 		.cpu_name		= "G2_LE",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB |
-			CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS,
-		.cpu_user_features	= COMMON_PPC,
+		.cpu_features		= CPU_FTRS_G2_LE,
+		.cpu_user_features	= COMMON_USER,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.cpu_setup		= __setup_cpu_603
@@ -594,10 +681,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0x7fff0000,
 		.pvr_value		= 0x00830000,
 		.cpu_name		= "e300",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB |
-			CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS,
-		.cpu_user_features	= COMMON_PPC,
+		.cpu_features		= CPU_FTRS_E300,
+		.cpu_user_features	= COMMON_USER,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.cpu_setup		= __setup_cpu_603
@@ -606,114 +691,12 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0x00000000,
 		.pvr_value		= 0x00000000,
 		.cpu_name		= "(generic PPC)",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
-			CPU_FTR_HPTE_TABLE,
-		.cpu_user_features	= COMMON_PPC,
+		.cpu_features		= CPU_FTRS_CLASSIC32,
+		.cpu_user_features	= COMMON_USER,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
-		.cpu_setup		= __setup_cpu_generic
 	},
 #endif /* CLASSIC_PPC */
-#ifdef CONFIG_PPC64BRIDGE
-	{	/* Power3 */
-		.pvr_mask		= 0xffff0000,
-		.pvr_value		= 0x00400000,
-		.cpu_name		= "Power3 (630)",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
-			CPU_FTR_HPTE_TABLE,
-		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_64,
-		.icache_bsize		= 128,
-		.dcache_bsize		= 128,
-		.num_pmcs		= 8,
-		.cpu_setup		= __setup_cpu_power3
-	},
-	{	/* Power3+ */
-		.pvr_mask		= 0xffff0000,
-		.pvr_value		= 0x00410000,
-		.cpu_name		= "Power3 (630+)",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
-			CPU_FTR_HPTE_TABLE,
-		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_64,
-		.icache_bsize		= 128,
-		.dcache_bsize		= 128,
-		.num_pmcs		= 8,
-		.cpu_setup		= __setup_cpu_power3
-	},
-	{	/* I-star */
-		.pvr_mask		= 0xffff0000,
-		.pvr_value		= 0x00360000,
-		.cpu_name		= "I-star",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
-			CPU_FTR_HPTE_TABLE,
-		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_64,
-		.icache_bsize		= 128,
-		.dcache_bsize		= 128,
-		.num_pmcs		= 8,
-		.cpu_setup		= __setup_cpu_power3
-	},
-	{	/* S-star */
-		.pvr_mask		= 0xffff0000,
-		.pvr_value		= 0x00370000,
-		.cpu_name		= "S-star",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
-			CPU_FTR_HPTE_TABLE,
-		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_64,
-		.icache_bsize		= 128,
-		.dcache_bsize		= 128,
-		.num_pmcs		= 8,
-		.cpu_setup		= __setup_cpu_power3
-	},
-#endif /* CONFIG_PPC64BRIDGE */
-#ifdef CONFIG_POWER4
-	{	/* Power4 */
-		.pvr_mask		= 0xffff0000,
-		.pvr_value		= 0x00350000,
-		.cpu_name		= "Power4",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
-			CPU_FTR_HPTE_TABLE,
-		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_64,
-		.icache_bsize		= 128,
-		.dcache_bsize		= 128,
-		.num_pmcs		= 8,
-		.cpu_setup		= __setup_cpu_power4
-	},
-	{	/* PPC970 */
-		.pvr_mask		= 0xffff0000,
-		.pvr_value		= 0x00390000,
-		.cpu_name		= "PPC970",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
-			CPU_FTR_HPTE_TABLE |
-			CPU_FTR_ALTIVEC_COMP | CPU_FTR_MAYBE_CAN_NAP,
-		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_64 |
-			PPC_FEATURE_ALTIVEC_COMP,
-		.icache_bsize		= 128,
-		.dcache_bsize		= 128,
-		.num_pmcs		= 8,
-		.cpu_setup		= __setup_cpu_ppc970
-	},
-	{	/* PPC970FX */
-		.pvr_mask		= 0xffff0000,
-		.pvr_value		= 0x003c0000,
-		.cpu_name		= "PPC970FX",
-		.cpu_features		= CPU_FTR_COMMON |
-			CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
-			CPU_FTR_HPTE_TABLE |
-			CPU_FTR_ALTIVEC_COMP | CPU_FTR_MAYBE_CAN_NAP,
-		.cpu_user_features	= COMMON_PPC | PPC_FEATURE_64 |
-			PPC_FEATURE_ALTIVEC_COMP,
-		.icache_bsize		= 128,
-		.dcache_bsize		= 128,
-		.num_pmcs		= 8,
-		.cpu_setup		= __setup_cpu_ppc970
-	},
-#endif /* CONFIG_POWER4 */
 #ifdef CONFIG_8xx
 	{	/* 8xx */
 		.pvr_mask		= 0xffff0000,
@@ -721,8 +704,7 @@ struct cpu_spec	cpu_specs[] = {
 		.cpu_name		= "8xx",
 		/* CPU_FTR_MAYBE_CAN_DOZE is possible,
 		 * if the 8xx code is there.... */
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB,
+		.cpu_features		= CPU_FTRS_8XX,
 		.cpu_user_features	= PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
 		.icache_bsize		= 16,
 		.dcache_bsize		= 16,
@@ -733,8 +715,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffffff00,
 		.pvr_value		= 0x00200200,
 		.cpu_name		= "403GC",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB,
+		.cpu_features		= CPU_FTRS_40X,
 		.cpu_user_features	= PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
 		.icache_bsize		= 16,
 		.dcache_bsize		= 16,
@@ -743,9 +724,9 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffffff00,
 		.pvr_value		= 0x00201400,
 		.cpu_name		= "403GCX",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB,
-		.cpu_user_features	= PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
+		.cpu_features		= CPU_FTRS_40X,
+		.cpu_user_features	= PPC_FEATURE_32 |
+		 	PPC_FEATURE_HAS_MMU | PPC_FEATURE_NO_TB,
 		.icache_bsize		= 16,
 		.dcache_bsize		= 16,
 	},
@@ -753,8 +734,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x00200000,
 		.cpu_name		= "403G ??",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB,
+		.cpu_features		= CPU_FTRS_40X,
 		.cpu_user_features	= PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
 		.icache_bsize		= 16,
 		.dcache_bsize		= 16,
@@ -763,8 +743,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x40110000,
 		.cpu_name		= "405GP",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB,
+		.cpu_features		= CPU_FTRS_40X,
 		.cpu_user_features	= PPC_FEATURE_32 |
 			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
 		.icache_bsize		= 32,
@@ -774,8 +753,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x40130000,
 		.cpu_name		= "STB03xxx",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB,
+		.cpu_features		= CPU_FTRS_40X,
 		.cpu_user_features	= PPC_FEATURE_32 |
 			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
 		.icache_bsize		= 32,
@@ -785,8 +763,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x41810000,
 		.cpu_name		= "STB04xxx",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB,
+		.cpu_features		= CPU_FTRS_40X,
 		.cpu_user_features	= PPC_FEATURE_32 |
 			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
 		.icache_bsize		= 32,
@@ -796,8 +773,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x41610000,
 		.cpu_name		= "NP405L",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB,
+		.cpu_features		= CPU_FTRS_40X,
 		.cpu_user_features	= PPC_FEATURE_32 |
 			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
 		.icache_bsize		= 32,
@@ -807,8 +783,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x40B10000,
 		.cpu_name		= "NP4GS3",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB,
+		.cpu_features		= CPU_FTRS_40X,
 		.cpu_user_features	= PPC_FEATURE_32 |
 			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
 		.icache_bsize		= 32,
@@ -818,8 +793,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x41410000,
 		.cpu_name		= "NP405H",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB,
+		.cpu_features		= CPU_FTRS_40X,
 		.cpu_user_features	= PPC_FEATURE_32 |
 			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
 		.icache_bsize		= 32,
@@ -829,8 +803,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x50910000,
 		.cpu_name		= "405GPr",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB,
+		.cpu_features		= CPU_FTRS_40X,
 		.cpu_user_features	= PPC_FEATURE_32 |
 			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
 		.icache_bsize		= 32,
@@ -840,8 +813,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x51510000,
 		.cpu_name		= "STBx25xx",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB,
+		.cpu_features		= CPU_FTRS_40X,
 		.cpu_user_features	= PPC_FEATURE_32 |
 			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
 		.icache_bsize		= 32,
@@ -851,8 +823,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x41F10000,
 		.cpu_name		= "405LP",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB,
+		.cpu_features		= CPU_FTRS_40X,
 		.cpu_user_features	= PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
@@ -861,8 +832,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x20010000,
 		.cpu_name		= "Virtex-II Pro",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB,
+		.cpu_features		= CPU_FTRS_40X,
 		.cpu_user_features	= PPC_FEATURE_32 |
 			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
 		.icache_bsize		= 32,
@@ -872,8 +842,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x51210000,
 		.cpu_name		= "405EP",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB,
+		.cpu_features		= CPU_FTRS_40X,
 		.cpu_user_features	= PPC_FEATURE_32 |
 			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
 		.icache_bsize		= 32,
@@ -886,9 +855,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xf0000fff,
 		.pvr_value		= 0x40000850,
 		.cpu_name		= "440EP Rev. A",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB,
-		.cpu_user_features	= COMMON_PPC, /* 440EP has an FPU */
+		.cpu_features		= CPU_FTRS_44X,
+		.cpu_user_features	= COMMON_USER, /* 440EP has an FPU */
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 	},
@@ -896,28 +864,25 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xf0000fff,
 		.pvr_value		= 0x400008d3,
 		.cpu_name		= "440EP Rev. B",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB,
-		.cpu_user_features	= COMMON_PPC, /* 440EP has an FPU */
+		.cpu_features		= CPU_FTRS_44X,
+		.cpu_user_features	= COMMON_USER, /* 440EP has an FPU */
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 	},
-	{ 	/* 440GP Rev. B */
+	{	/* 440GP Rev. B */
 		.pvr_mask		= 0xf0000fff,
 		.pvr_value		= 0x40000440,
 		.cpu_name		= "440GP Rev. B",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB,
+		.cpu_features		= CPU_FTRS_44X,
 		.cpu_user_features	= PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 	},
-	{ 	/* 440GP Rev. C */
+	{	/* 440GP Rev. C */
 		.pvr_mask		= 0xf0000fff,
 		.pvr_value		= 0x40000481,
 		.cpu_name		= "440GP Rev. C",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB,
+		.cpu_features		= CPU_FTRS_44X,
 		.cpu_user_features	= PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
@@ -926,8 +891,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xf0000fff,
 		.pvr_value		= 0x50000850,
 		.cpu_name		= "440GX Rev. A",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB,
+		.cpu_features		= CPU_FTRS_44X,
 		.cpu_user_features	= PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
@@ -936,8 +900,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xf0000fff,
 		.pvr_value		= 0x50000851,
 		.cpu_name		= "440GX Rev. B",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB,
+		.cpu_features		= CPU_FTRS_44X,
 		.cpu_user_features	= PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
@@ -946,8 +909,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xf0000fff,
 		.pvr_value		= 0x50000892,
 		.cpu_name		= "440GX Rev. C",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB,
+		.cpu_features		= CPU_FTRS_44X,
 		.cpu_user_features	= PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
@@ -956,8 +918,7 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xf0000fff,
 		.pvr_value		= 0x50000894,
 		.cpu_name		= "440GX Rev. F",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB,
+		.cpu_features		= CPU_FTRS_44X,
 		.cpu_user_features	= PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
@@ -966,6 +927,15 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0xff000fff,
 		.pvr_value		= 0x53000891,
 		.cpu_name		= "440SP Rev. A",
+		.cpu_features		= CPU_FTRS_44X,
+		.cpu_user_features	= PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+	},
+	{ /* 440SPe Rev. A */
+		.pvr_mask		= 0xff000fff,
+		.pvr_value		= 0x53000890,
+		.cpu_name		= "440SPe Rev. A",
 		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
 			CPU_FTR_USE_TB,
 		.cpu_user_features	= PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
@@ -974,36 +944,35 @@ struct cpu_spec	cpu_specs[] = {
 	},
 #endif /* CONFIG_44x */
 #ifdef CONFIG_FSL_BOOKE
-	{ 	/* e200z5 */
+	{	/* e200z5 */
 		.pvr_mask		= 0xfff00000,
 		.pvr_value		= 0x81000000,
 		.cpu_name		= "e200z5",
 		/* xxx - galak: add CPU_FTR_MAYBE_CAN_DOZE */
-		.cpu_features		= CPU_FTR_USE_TB,
+		.cpu_features		= CPU_FTRS_E200,
 		.cpu_user_features	= PPC_FEATURE_32 |
 			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_EFP_SINGLE |
 			PPC_FEATURE_UNIFIED_CACHE,
 		.dcache_bsize		= 32,
 	},
-	{ 	/* e200z6 */
+	{	/* e200z6 */
 		.pvr_mask		= 0xfff00000,
 		.pvr_value		= 0x81100000,
 		.cpu_name		= "e200z6",
 		/* xxx - galak: add CPU_FTR_MAYBE_CAN_DOZE */
-		.cpu_features		= CPU_FTR_USE_TB,
+		.cpu_features		= CPU_FTRS_E200,
 		.cpu_user_features	= PPC_FEATURE_32 |
 			PPC_FEATURE_HAS_MMU | PPC_FEATURE_SPE_COMP |
 			PPC_FEATURE_HAS_EFP_SINGLE |
 			PPC_FEATURE_UNIFIED_CACHE,
 		.dcache_bsize		= 32,
 	},
-	{ 	/* e500 */
+	{	/* e500 */
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x80200000,
 		.cpu_name		= "e500",
 		/* xxx - galak: add CPU_FTR_MAYBE_CAN_DOZE */
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB,
+		.cpu_features		= CPU_FTRS_E500,
 		.cpu_user_features	= PPC_FEATURE_32 |
 			PPC_FEATURE_HAS_MMU | PPC_FEATURE_SPE_COMP |
 			PPC_FEATURE_HAS_EFP_SINGLE,
@@ -1011,13 +980,12 @@ struct cpu_spec	cpu_specs[] = {
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
 	},
-	{ 	/* e500v2 */
+	{	/* e500v2 */
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x80210000,
 		.cpu_name		= "e500v2",
 		/* xxx - galak: add CPU_FTR_MAYBE_CAN_DOZE */
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB | CPU_FTR_BIG_PHYS,
+		.cpu_features		= CPU_FTRS_E500_2,
 		.cpu_user_features	= PPC_FEATURE_32 |
 			PPC_FEATURE_HAS_MMU | PPC_FEATURE_SPE_COMP |
 			PPC_FEATURE_HAS_EFP_SINGLE | PPC_FEATURE_HAS_EFP_DOUBLE,
@@ -1031,10 +999,11 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_mask		= 0x00000000,
 		.pvr_value		= 0x00000000,
 		.cpu_name		= "(generic PPC)",
-		.cpu_features		= CPU_FTR_COMMON,
+		.cpu_features		= CPU_FTRS_GENERIC_32,
 		.cpu_user_features	= PPC_FEATURE_32,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 	}
 #endif /* !CLASSIC_PPC */
+#endif /* CONFIG_PPC32 */
 };
diff --git a/arch/ppc64/kernel/dma.c b/arch/powerpc/kernel/dma_64.c
index 4da8e31b2b61..7c3419656ccc 100644
--- a/arch/ppc64/kernel/dma.c
+++ b/arch/powerpc/kernel/dma_64.c
@@ -53,7 +53,7 @@ int dma_set_mask(struct device *dev, u64 dma_mask)
 EXPORT_SYMBOL(dma_set_mask);
 
 void *dma_alloc_coherent(struct device *dev, size_t size,
-		dma_addr_t *dma_handle, unsigned int __nocast flag)
+		dma_addr_t *dma_handle, gfp_t flag)
 {
 	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
 
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
new file mode 100644
index 000000000000..2e99ae41723c
--- /dev/null
+++ b/arch/powerpc/kernel/entry_32.S
@@ -0,0 +1,1000 @@
+/*
+ *  PowerPC version
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *  Rewritten by Cort Dougan (cort@fsmlabs.com) for PReP
+ *    Copyright (C) 1996 Cort Dougan <cort@fsmlabs.com>
+ *  Adapted for Power Macintosh by Paul Mackerras.
+ *  Low-level exception handlers and MMU support
+ *  rewritten by Paul Mackerras.
+ *    Copyright (C) 1996 Paul Mackerras.
+ *  MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
+ *
+ *  This file contains the system call entry code, context switch
+ *  code, and exception/interrupt return code for PowerPC.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/sys.h>
+#include <linux/threads.h>
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/unistd.h>
+
+#undef SHOW_SYSCALLS
+#undef SHOW_SYSCALLS_TASK
+
+/*
+ * MSR_KERNEL is > 0x10000 on 4xx/Book-E since it include MSR_CE.
+ */
+#if MSR_KERNEL >= 0x10000
+#define LOAD_MSR_KERNEL(r, x)	lis r,(x)@h; ori r,r,(x)@l
+#else
+#define LOAD_MSR_KERNEL(r, x)	li r,(x)
+#endif
+
+#ifdef CONFIG_BOOKE
+#include "head_booke.h"
+#define TRANSFER_TO_HANDLER_EXC_LEVEL(exc_level)	\
+	mtspr	exc_level##_SPRG,r8;			\
+	BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);		\
+	lwz	r0,GPR10-INT_FRAME_SIZE(r8);		\
+	stw	r0,GPR10(r11);				\
+	lwz	r0,GPR11-INT_FRAME_SIZE(r8);		\
+	stw	r0,GPR11(r11);				\
+	mfspr	r8,exc_level##_SPRG
+
+	.globl	mcheck_transfer_to_handler
+mcheck_transfer_to_handler:
+	TRANSFER_TO_HANDLER_EXC_LEVEL(MCHECK)
+	b	transfer_to_handler_full
+
+	.globl	debug_transfer_to_handler
+debug_transfer_to_handler:
+	TRANSFER_TO_HANDLER_EXC_LEVEL(DEBUG)
+	b	transfer_to_handler_full
+
+	.globl	crit_transfer_to_handler
+crit_transfer_to_handler:
+	TRANSFER_TO_HANDLER_EXC_LEVEL(CRIT)
+	/* fall through */
+#endif
+
+#ifdef CONFIG_40x
+	.globl	crit_transfer_to_handler
+crit_transfer_to_handler:
+	lwz	r0,crit_r10@l(0)
+	stw	r0,GPR10(r11)
+	lwz	r0,crit_r11@l(0)
+	stw	r0,GPR11(r11)
+	/* fall through */
+#endif
+
+/*
+ * This code finishes saving the registers to the exception frame
+ * and jumps to the appropriate handler for the exception, turning
+ * on address translation.
+ * Note that we rely on the caller having set cr0.eq iff the exception
+ * occurred in kernel mode (i.e. MSR:PR = 0).
+ */
+	.globl	transfer_to_handler_full
+transfer_to_handler_full:
+	SAVE_NVGPRS(r11)
+	/* fall through */
+
+	.globl	transfer_to_handler
+transfer_to_handler:
+	stw	r2,GPR2(r11)
+	stw	r12,_NIP(r11)
+	stw	r9,_MSR(r11)
+	andi.	r2,r9,MSR_PR
+	mfctr	r12
+	mfspr	r2,SPRN_XER
+	stw	r12,_CTR(r11)
+	stw	r2,_XER(r11)
+	mfspr	r12,SPRN_SPRG3
+	addi	r2,r12,-THREAD
+	tovirt(r2,r2)			/* set r2 to current */
+	beq	2f			/* if from user, fix up THREAD.regs */
+	addi	r11,r1,STACK_FRAME_OVERHEAD
+	stw	r11,PT_REGS(r12)
+#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+	/* Check to see if the dbcr0 register is set up to debug.  Use the
+	   single-step bit to do this. */
+	lwz	r12,THREAD_DBCR0(r12)
+	andis.	r12,r12,DBCR0_IC@h
+	beq+	3f
+	/* From user and task is ptraced - load up global dbcr0 */
+	li	r12,-1			/* clear all pending debug events */
+	mtspr	SPRN_DBSR,r12
+	lis	r11,global_dbcr0@ha
+	tophys(r11,r11)
+	addi	r11,r11,global_dbcr0@l
+	lwz	r12,0(r11)
+	mtspr	SPRN_DBCR0,r12
+	lwz	r12,4(r11)
+	addi	r12,r12,-1
+	stw	r12,4(r11)
+#endif
+	b	3f
+2:	/* if from kernel, check interrupted DOZE/NAP mode and
+         * check for stack overflow
+         */
+#ifdef CONFIG_6xx
+	mfspr	r11,SPRN_HID0
+	mtcr	r11
+BEGIN_FTR_SECTION
+	bt-	8,power_save_6xx_restore	/* Check DOZE */
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
+BEGIN_FTR_SECTION
+	bt-	9,power_save_6xx_restore	/* Check NAP */
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
+#endif /* CONFIG_6xx */
+	.globl transfer_to_handler_cont
+transfer_to_handler_cont:
+	lwz	r11,THREAD_INFO-THREAD(r12)
+	cmplw	r1,r11			/* if r1 <= current->thread_info */
+	ble-	stack_ovf		/* then the kernel stack overflowed */
+3:
+	mflr	r9
+	lwz	r11,0(r9)		/* virtual address of handler */
+	lwz	r9,4(r9)		/* where to go when done */
+	FIX_SRR1(r10,r12)
+	mtspr	SPRN_SRR0,r11
+	mtspr	SPRN_SRR1,r10
+	mtlr	r9
+	SYNC
+	RFI				/* jump to handler, enable MMU */
+
+/*
+ * On kernel stack overflow, load up an initial stack pointer
+ * and call StackOverflow(regs), which should not return.
+ */
+stack_ovf:
+	/* sometimes we use a statically-allocated stack, which is OK. */
+	lis	r11,_end@h
+	ori	r11,r11,_end@l
+	cmplw	r1,r11
+	ble	3b			/* r1 <= &_end is OK */
+	SAVE_NVGPRS(r11)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	lis	r1,init_thread_union@ha
+	addi	r1,r1,init_thread_union@l
+	addi	r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
+	lis	r9,StackOverflow@ha
+	addi	r9,r9,StackOverflow@l
+	LOAD_MSR_KERNEL(r10,MSR_KERNEL)
+	FIX_SRR1(r10,r12)
+	mtspr	SPRN_SRR0,r9
+	mtspr	SPRN_SRR1,r10
+	SYNC
+	RFI
+
+/*
+ * Handle a system call.
+ */
+	.stabs	"arch/powerpc/kernel/",N_SO,0,0,0f
+	.stabs	"entry_32.S",N_SO,0,0,0f
+0:
+
+_GLOBAL(DoSyscall)
+	stw	r0,THREAD+LAST_SYSCALL(r2)
+	stw	r3,ORIG_GPR3(r1)
+	li	r12,0
+	stw	r12,RESULT(r1)
+	lwz	r11,_CCR(r1)	/* Clear SO bit in CR */
+	rlwinm	r11,r11,0,4,2
+	stw	r11,_CCR(r1)
+#ifdef SHOW_SYSCALLS
+	bl	do_show_syscall
+#endif /* SHOW_SYSCALLS */
+	rlwinm	r10,r1,0,0,(31-THREAD_SHIFT)	/* current_thread_info() */
+	li	r11,0
+	stb	r11,TI_SC_NOERR(r10)
+	lwz	r11,TI_FLAGS(r10)
+	andi.	r11,r11,_TIF_SYSCALL_T_OR_A
+	bne-	syscall_dotrace
+syscall_dotrace_cont:
+	cmplwi	0,r0,NR_syscalls
+	lis	r10,sys_call_table@h
+	ori	r10,r10,sys_call_table@l
+	slwi	r0,r0,2
+	bge-	66f
+	lwzx	r10,r10,r0	/* Fetch system call handler [ptr] */
+	mtlr	r10
+	addi	r9,r1,STACK_FRAME_OVERHEAD
+	PPC440EP_ERR42
+	blrl			/* Call handler */
+	.globl	ret_from_syscall
+ret_from_syscall:
+#ifdef SHOW_SYSCALLS
+	bl	do_show_syscall_exit
+#endif
+	mr	r6,r3
+	li	r11,-_LAST_ERRNO
+	cmplw	0,r3,r11
+	rlwinm	r12,r1,0,0,(31-THREAD_SHIFT)	/* current_thread_info() */
+	blt+	30f
+	lbz	r11,TI_SC_NOERR(r12)
+	cmpwi	r11,0
+	bne	30f
+	neg	r3,r3
+	lwz	r10,_CCR(r1)	/* Set SO bit in CR */
+	oris	r10,r10,0x1000
+	stw	r10,_CCR(r1)
+
+	/* disable interrupts so current_thread_info()->flags can't change */
+30:	LOAD_MSR_KERNEL(r10,MSR_KERNEL)	/* doesn't include MSR_EE */
+	SYNC
+	MTMSRD(r10)
+	lwz	r9,TI_FLAGS(r12)
+	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SIGPENDING|_TIF_NEED_RESCHED)
+	bne-	syscall_exit_work
+syscall_exit_cont:
+#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+	/* If the process has its own DBCR0 value, load it up.  The single
+	   step bit tells us that dbcr0 should be loaded. */
+	lwz	r0,THREAD+THREAD_DBCR0(r2)
+	andis.	r10,r0,DBCR0_IC@h
+	bnel-	load_dbcr0
+#endif
+	stwcx.	r0,0,r1			/* to clear the reservation */
+	lwz	r4,_LINK(r1)
+	lwz	r5,_CCR(r1)
+	mtlr	r4
+	mtcr	r5
+	lwz	r7,_NIP(r1)
+	lwz	r8,_MSR(r1)
+	FIX_SRR1(r8, r0)
+	lwz	r2,GPR2(r1)
+	lwz	r1,GPR1(r1)
+	mtspr	SPRN_SRR0,r7
+	mtspr	SPRN_SRR1,r8
+	SYNC
+	RFI
+
+66:	li	r3,-ENOSYS
+	b	ret_from_syscall
+
+	.globl	ret_from_fork
+ret_from_fork:
+	REST_NVGPRS(r1)
+	bl	schedule_tail
+	li	r3,0
+	b	ret_from_syscall
+
+/* Traced system call support */
+syscall_dotrace:
+	SAVE_NVGPRS(r1)
+	li	r0,0xc00
+	stw	r0,_TRAP(r1)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	do_syscall_trace_enter
+	lwz	r0,GPR0(r1)	/* Restore original registers */
+	lwz	r3,GPR3(r1)
+	lwz	r4,GPR4(r1)
+	lwz	r5,GPR5(r1)
+	lwz	r6,GPR6(r1)
+	lwz	r7,GPR7(r1)
+	lwz	r8,GPR8(r1)
+	REST_NVGPRS(r1)
+	b	syscall_dotrace_cont
+
+syscall_exit_work:
+	stw	r6,RESULT(r1)	/* Save result */
+	stw	r3,GPR3(r1)	/* Update return value */
+	andi.	r0,r9,_TIF_SYSCALL_T_OR_A
+	beq	5f
+	ori	r10,r10,MSR_EE
+	SYNC
+	MTMSRD(r10)		/* re-enable interrupts */
+	lwz	r4,_TRAP(r1)
+	andi.	r4,r4,1
+	beq	4f
+	SAVE_NVGPRS(r1)
+	li	r4,0xc00
+	stw	r4,_TRAP(r1)
+4:
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	do_syscall_trace_leave
+	REST_NVGPRS(r1)
+2:
+	lwz	r3,GPR3(r1)
+	LOAD_MSR_KERNEL(r10,MSR_KERNEL)	/* doesn't include MSR_EE */
+	SYNC
+	MTMSRD(r10)		/* disable interrupts again */
+	rlwinm	r12,r1,0,0,(31-THREAD_SHIFT)	/* current_thread_info() */
+	lwz	r9,TI_FLAGS(r12)
+5:
+	andi.	r0,r9,_TIF_NEED_RESCHED
+	bne	1f
+	lwz	r5,_MSR(r1)
+	andi.	r5,r5,MSR_PR
+	beq	syscall_exit_cont
+	andi.	r0,r9,_TIF_SIGPENDING
+	beq	syscall_exit_cont
+	b	do_user_signal
+1:
+	ori	r10,r10,MSR_EE
+	SYNC
+	MTMSRD(r10)		/* re-enable interrupts */
+	bl	schedule
+	b	2b
+
+#ifdef SHOW_SYSCALLS
+do_show_syscall:
+#ifdef SHOW_SYSCALLS_TASK
+	lis	r11,show_syscalls_task@ha
+	lwz	r11,show_syscalls_task@l(r11)
+	cmp	0,r2,r11
+	bnelr
+#endif
+	stw	r31,GPR31(r1)
+	mflr	r31
+	lis	r3,7f@ha
+	addi	r3,r3,7f@l
+	lwz	r4,GPR0(r1)
+	lwz	r5,GPR3(r1)
+	lwz	r6,GPR4(r1)
+	lwz	r7,GPR5(r1)
+	lwz	r8,GPR6(r1)
+	lwz	r9,GPR7(r1)
+	bl	printk
+	lis	r3,77f@ha
+	addi	r3,r3,77f@l
+	lwz	r4,GPR8(r1)
+	mr	r5,r2
+	bl	printk
+	lwz	r0,GPR0(r1)
+	lwz	r3,GPR3(r1)
+	lwz	r4,GPR4(r1)
+	lwz	r5,GPR5(r1)
+	lwz	r6,GPR6(r1)
+	lwz	r7,GPR7(r1)
+	lwz	r8,GPR8(r1)
+	mtlr	r31
+	lwz	r31,GPR31(r1)
+	blr
+
+do_show_syscall_exit:
+#ifdef SHOW_SYSCALLS_TASK
+	lis	r11,show_syscalls_task@ha
+	lwz	r11,show_syscalls_task@l(r11)
+	cmp	0,r2,r11
+	bnelr
+#endif
+	stw	r31,GPR31(r1)
+	mflr	r31
+	stw	r3,RESULT(r1)	/* Save result */
+	mr	r4,r3
+	lis	r3,79f@ha
+	addi	r3,r3,79f@l
+	bl	printk
+	lwz	r3,RESULT(r1)
+	mtlr	r31
+	lwz	r31,GPR31(r1)
+	blr
+
+7:	.string	"syscall %d(%x, %x, %x, %x, %x, "
+77:	.string	"%x), current=%p\n"
+79:	.string	" -> %x\n"
+	.align	2,0
+
+#ifdef SHOW_SYSCALLS_TASK
+	.data
+	.globl	show_syscalls_task
+show_syscalls_task:
+	.long	-1
+	.text
+#endif
+#endif /* SHOW_SYSCALLS */
+
+/*
+ * The sigsuspend and rt_sigsuspend system calls can call do_signal
+ * and thus put the process into the stopped state where we might
+ * want to examine its user state with ptrace.  Therefore we need
+ * to save all the nonvolatile registers (r13 - r31) before calling
+ * the C code.
+ */
+	.globl	ppc_sigsuspend
+ppc_sigsuspend:
+	SAVE_NVGPRS(r1)
+	lwz	r0,_TRAP(r1)
+	rlwinm	r0,r0,0,0,30		/* clear LSB to indicate full */
+	stw	r0,_TRAP(r1)		/* register set saved */
+	b	sys_sigsuspend
+
+	.globl	ppc_rt_sigsuspend
+ppc_rt_sigsuspend:
+	SAVE_NVGPRS(r1)
+	lwz	r0,_TRAP(r1)
+	rlwinm	r0,r0,0,0,30
+	stw	r0,_TRAP(r1)
+	b	sys_rt_sigsuspend
+
+	.globl	ppc_fork
+ppc_fork:
+	SAVE_NVGPRS(r1)
+	lwz	r0,_TRAP(r1)
+	rlwinm	r0,r0,0,0,30		/* clear LSB to indicate full */
+	stw	r0,_TRAP(r1)		/* register set saved */
+	b	sys_fork
+
+	.globl	ppc_vfork
+ppc_vfork:
+	SAVE_NVGPRS(r1)
+	lwz	r0,_TRAP(r1)
+	rlwinm	r0,r0,0,0,30		/* clear LSB to indicate full */
+	stw	r0,_TRAP(r1)		/* register set saved */
+	b	sys_vfork
+
+	.globl	ppc_clone
+ppc_clone:
+	SAVE_NVGPRS(r1)
+	lwz	r0,_TRAP(r1)
+	rlwinm	r0,r0,0,0,30		/* clear LSB to indicate full */
+	stw	r0,_TRAP(r1)		/* register set saved */
+	b	sys_clone
+
+	.globl	ppc_swapcontext
+ppc_swapcontext:
+	SAVE_NVGPRS(r1)
+	lwz	r0,_TRAP(r1)
+	rlwinm	r0,r0,0,0,30		/* clear LSB to indicate full */
+	stw	r0,_TRAP(r1)		/* register set saved */
+	b	sys_swapcontext
+
+/*
+ * Top-level page fault handling.
+ * This is in assembler because if do_page_fault tells us that
+ * it is a bad kernel page fault, we want to save the non-volatile
+ * registers before calling bad_page_fault.
+ */
+	.globl	handle_page_fault
+handle_page_fault:
+	stw	r4,_DAR(r1)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	do_page_fault
+	cmpwi	r3,0
+	beq+	ret_from_except
+	SAVE_NVGPRS(r1)
+	lwz	r0,_TRAP(r1)
+	clrrwi	r0,r0,1
+	stw	r0,_TRAP(r1)
+	mr	r5,r3
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	lwz	r4,_DAR(r1)
+	bl	bad_page_fault
+	b	ret_from_except_full
+
+/*
+ * This routine switches between two different tasks.  The process
+ * state of one is saved on its kernel stack.  Then the state
+ * of the other is restored from its kernel stack.  The memory
+ * management hardware is updated to the second process's state.
+ * Finally, we can return to the second process.
+ * On entry, r3 points to the THREAD for the current task, r4
+ * points to the THREAD for the new task.
+ *
+ * This routine is always called with interrupts disabled.
+ *
+ * Note: there are two ways to get to the "going out" portion
+ * of this code; either by coming in via the entry (_switch)
+ * or via "fork" which must set up an environment equivalent
+ * to the "_switch" path.  If you change this , you'll have to
+ * change the fork code also.
+ *
+ * The code which creates the new task context is in 'copy_thread'
+ * in arch/ppc/kernel/process.c
+ */
+_GLOBAL(_switch)
+	stwu	r1,-INT_FRAME_SIZE(r1)
+	mflr	r0
+	stw	r0,INT_FRAME_SIZE+4(r1)
+	/* r3-r12 are caller saved -- Cort */
+	SAVE_NVGPRS(r1)
+	stw	r0,_NIP(r1)	/* Return to switch caller */
+	mfmsr	r11
+	li	r0,MSR_FP	/* Disable floating-point */
+#ifdef CONFIG_ALTIVEC
+BEGIN_FTR_SECTION
+	oris	r0,r0,MSR_VEC@h	/* Disable altivec */
+	mfspr	r12,SPRN_VRSAVE	/* save vrsave register value */
+	stw	r12,THREAD+THREAD_VRSAVE(r2)
+END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_SPE
+	oris	r0,r0,MSR_SPE@h	 /* Disable SPE */
+	mfspr	r12,SPRN_SPEFSCR /* save spefscr register value */
+	stw	r12,THREAD+THREAD_SPEFSCR(r2)
+#endif /* CONFIG_SPE */
+	and.	r0,r0,r11	/* FP or altivec or SPE enabled? */
+	beq+	1f
+	andc	r11,r11,r0
+	MTMSRD(r11)
+	isync
+1:	stw	r11,_MSR(r1)
+	mfcr	r10
+	stw	r10,_CCR(r1)
+	stw	r1,KSP(r3)	/* Set old stack pointer */
+
+#ifdef CONFIG_SMP
+	/* We need a sync somewhere here to make sure that if the
+	 * previous task gets rescheduled on another CPU, it sees all
+	 * stores it has performed on this one.
+	 */
+	sync
+#endif /* CONFIG_SMP */
+
+	tophys(r0,r4)
+	CLR_TOP32(r0)
+	mtspr	SPRN_SPRG3,r0	/* Update current THREAD phys addr */
+	lwz	r1,KSP(r4)	/* Load new stack pointer */
+
+	/* save the old current 'last' for return value */
+	mr	r3,r2
+	addi	r2,r4,-THREAD	/* Update current */
+
+#ifdef CONFIG_ALTIVEC
+BEGIN_FTR_SECTION
+	lwz	r0,THREAD+THREAD_VRSAVE(r2)
+	mtspr	SPRN_VRSAVE,r0		/* if G4, restore VRSAVE reg */
+END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_SPE
+	lwz	r0,THREAD+THREAD_SPEFSCR(r2)
+	mtspr	SPRN_SPEFSCR,r0		/* restore SPEFSCR reg */
+#endif /* CONFIG_SPE */
+
+	lwz	r0,_CCR(r1)
+	mtcrf	0xFF,r0
+	/* r3-r12 are destroyed -- Cort */
+	REST_NVGPRS(r1)
+
+	lwz	r4,_NIP(r1)	/* Return to _switch caller in new task */
+	mtlr	r4
+	addi	r1,r1,INT_FRAME_SIZE
+	blr
+
+	.globl	fast_exception_return
+fast_exception_return:
+#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
+	andi.	r10,r9,MSR_RI		/* check for recoverable interrupt */
+	beq	1f			/* if not, we've got problems */
+#endif
+
+2:	REST_4GPRS(3, r11)
+	lwz	r10,_CCR(r11)
+	REST_GPR(1, r11)
+	mtcr	r10
+	lwz	r10,_LINK(r11)
+	mtlr	r10
+	REST_GPR(10, r11)
+	mtspr	SPRN_SRR1,r9
+	mtspr	SPRN_SRR0,r12
+	REST_GPR(9, r11)
+	REST_GPR(12, r11)
+	lwz	r11,GPR11(r11)
+	SYNC
+	RFI
+
+#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
+/* check if the exception happened in a restartable section */
+1:	lis	r3,exc_exit_restart_end@ha
+	addi	r3,r3,exc_exit_restart_end@l
+	cmplw	r12,r3
+	bge	3f
+	lis	r4,exc_exit_restart@ha
+	addi	r4,r4,exc_exit_restart@l
+	cmplw	r12,r4
+	blt	3f
+	lis	r3,fee_restarts@ha
+	tophys(r3,r3)
+	lwz	r5,fee_restarts@l(r3)
+	addi	r5,r5,1
+	stw	r5,fee_restarts@l(r3)
+	mr	r12,r4		/* restart at exc_exit_restart */
+	b	2b
+
+	.comm	fee_restarts,4
+
+/* aargh, a nonrecoverable interrupt, panic */
+/* aargh, we don't know which trap this is */
+/* but the 601 doesn't implement the RI bit, so assume it's OK */
+3:
+BEGIN_FTR_SECTION
+	b	2b
+END_FTR_SECTION_IFSET(CPU_FTR_601)
+	li	r10,-1
+	stw	r10,_TRAP(r11)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	lis	r10,MSR_KERNEL@h
+	ori	r10,r10,MSR_KERNEL@l
+	bl	transfer_to_handler_full
+	.long	nonrecoverable_exception
+	.long	ret_from_except
+#endif
+
+	.globl	sigreturn_exit
+sigreturn_exit:
+	subi	r1,r3,STACK_FRAME_OVERHEAD
+	rlwinm	r12,r1,0,0,(31-THREAD_SHIFT)	/* current_thread_info() */
+	lwz	r9,TI_FLAGS(r12)
+	andi.	r0,r9,_TIF_SYSCALL_T_OR_A
+	beq+	ret_from_except_full
+	bl	do_syscall_trace_leave
+	/* fall through */
+
+	.globl	ret_from_except_full
+ret_from_except_full:
+	REST_NVGPRS(r1)
+	/* fall through */
+
+	.globl	ret_from_except
+ret_from_except:
+	/* Hard-disable interrupts so that current_thread_info()->flags
+	 * can't change between when we test it and when we return
+	 * from the interrupt. */
+	LOAD_MSR_KERNEL(r10,MSR_KERNEL)
+	SYNC			/* Some chip revs have problems here... */
+	MTMSRD(r10)		/* disable interrupts */
+
+	lwz	r3,_MSR(r1)	/* Returning to user mode? */
+	andi.	r0,r3,MSR_PR
+	beq	resume_kernel
+
+user_exc_return:		/* r10 contains MSR_KERNEL here */
+	/* Check current_thread_info()->flags */
+	rlwinm	r9,r1,0,0,(31-THREAD_SHIFT)
+	lwz	r9,TI_FLAGS(r9)
+	andi.	r0,r9,(_TIF_SIGPENDING|_TIF_NEED_RESCHED)
+	bne	do_work
+
+restore_user:
+#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+	/* Check whether this process has its own DBCR0 value.  The single
+	   step bit tells us that dbcr0 should be loaded. */
+	lwz	r0,THREAD+THREAD_DBCR0(r2)
+	andis.	r10,r0,DBCR0_IC@h
+	bnel-	load_dbcr0
+#endif
+
+#ifdef CONFIG_PREEMPT
+	b	restore
+
+/* N.B. the only way to get here is from the beq following ret_from_except. */
+resume_kernel:
+	/* check current_thread_info->preempt_count */
+	rlwinm	r9,r1,0,0,(31-THREAD_SHIFT)
+	lwz	r0,TI_PREEMPT(r9)
+	cmpwi	0,r0,0		/* if non-zero, just restore regs and return */
+	bne	restore
+	lwz	r0,TI_FLAGS(r9)
+	andi.	r0,r0,_TIF_NEED_RESCHED
+	beq+	restore
+	andi.	r0,r3,MSR_EE	/* interrupts off? */
+	beq	restore		/* don't schedule if so */
+1:	bl	preempt_schedule_irq
+	rlwinm	r9,r1,0,0,(31-THREAD_SHIFT)
+	lwz	r3,TI_FLAGS(r9)
+	andi.	r0,r3,_TIF_NEED_RESCHED
+	bne-	1b
+#else
+resume_kernel:
+#endif /* CONFIG_PREEMPT */
+
+	/* interrupts are hard-disabled at this point */
+restore:
+	lwz	r0,GPR0(r1)
+	lwz	r2,GPR2(r1)
+	REST_4GPRS(3, r1)
+	REST_2GPRS(7, r1)
+
+	lwz	r10,_XER(r1)
+	lwz	r11,_CTR(r1)
+	mtspr	SPRN_XER,r10
+	mtctr	r11
+
+	PPC405_ERR77(0,r1)
+	stwcx.	r0,0,r1			/* to clear the reservation */
+
+#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
+	lwz	r9,_MSR(r1)
+	andi.	r10,r9,MSR_RI		/* check if this exception occurred */
+	beql	nonrecoverable		/* at a bad place (MSR:RI = 0) */
+
+	lwz	r10,_CCR(r1)
+	lwz	r11,_LINK(r1)
+	mtcrf	0xFF,r10
+	mtlr	r11
+
+	/*
+	 * Once we put values in SRR0 and SRR1, we are in a state
+	 * where exceptions are not recoverable, since taking an
+	 * exception will trash SRR0 and SRR1.  Therefore we clear the
+	 * MSR:RI bit to indicate this.  If we do take an exception,
+	 * we can't return to the point of the exception but we
+	 * can restart the exception exit path at the label
+	 * exc_exit_restart below.  -- paulus
+	 */
+	LOAD_MSR_KERNEL(r10,MSR_KERNEL & ~MSR_RI)
+	SYNC
+	MTMSRD(r10)		/* clear the RI bit */
+	.globl exc_exit_restart
+exc_exit_restart:
+	lwz	r9,_MSR(r1)
+	lwz	r12,_NIP(r1)
+	FIX_SRR1(r9,r10)
+	mtspr	SPRN_SRR0,r12
+	mtspr	SPRN_SRR1,r9
+	REST_4GPRS(9, r1)
+	lwz	r1,GPR1(r1)
+	.globl exc_exit_restart_end
+exc_exit_restart_end:
+	SYNC
+	RFI
+
+#else /* !(CONFIG_4xx || CONFIG_BOOKE) */
+	/*
+	 * This is a bit different on 4xx/Book-E because it doesn't have
+	 * the RI bit in the MSR.
+	 * The TLB miss handler checks if we have interrupted
+	 * the exception exit path and restarts it if so
+	 * (well maybe one day it will... :).
+	 */
+	lwz	r11,_LINK(r1)
+	mtlr	r11
+	lwz	r10,_CCR(r1)
+	mtcrf	0xff,r10
+	REST_2GPRS(9, r1)
+	.globl exc_exit_restart
+exc_exit_restart:
+	lwz	r11,_NIP(r1)
+	lwz	r12,_MSR(r1)
+exc_exit_start:
+	mtspr	SPRN_SRR0,r11
+	mtspr	SPRN_SRR1,r12
+	REST_2GPRS(11, r1)
+	lwz	r1,GPR1(r1)
+	.globl exc_exit_restart_end
+exc_exit_restart_end:
+	PPC405_ERR77_SYNC
+	rfi
+	b	.			/* prevent prefetch past rfi */
+
+/*
+ * Returning from a critical interrupt in user mode doesn't need
+ * to be any different from a normal exception.  For a critical
+ * interrupt in the kernel, we just return (without checking for
+ * preemption) since the interrupt may have happened at some crucial
+ * place (e.g. inside the TLB miss handler), and because we will be
+ * running with r1 pointing into critical_stack, not the current
+ * process's kernel stack (and therefore current_thread_info() will
+ * give the wrong answer).
+ * We have to restore various SPRs that may have been in use at the
+ * time of the critical interrupt.
+ *
+ */
+#ifdef CONFIG_40x
+#define PPC_40x_TURN_OFF_MSR_DR						    \
+	/* avoid any possible TLB misses here by turning off MSR.DR, we	    \
+	 * assume the instructions here are mapped by a pinned TLB entry */ \
+	li	r10,MSR_IR;						    \
+	mtmsr	r10;							    \
+	isync;								    \
+	tophys(r1, r1);
+#else
+#define PPC_40x_TURN_OFF_MSR_DR
+#endif
+
+#define RET_FROM_EXC_LEVEL(exc_lvl_srr0, exc_lvl_srr1, exc_lvl_rfi)	\
+	REST_NVGPRS(r1);						\
+	lwz	r3,_MSR(r1);						\
+	andi.	r3,r3,MSR_PR;						\
+	LOAD_MSR_KERNEL(r10,MSR_KERNEL);				\
+	bne	user_exc_return;					\
+	lwz	r0,GPR0(r1);						\
+	lwz	r2,GPR2(r1);						\
+	REST_4GPRS(3, r1);						\
+	REST_2GPRS(7, r1);						\
+	lwz	r10,_XER(r1);						\
+	lwz	r11,_CTR(r1);						\
+	mtspr	SPRN_XER,r10;						\
+	mtctr	r11;							\
+	PPC405_ERR77(0,r1);						\
+	stwcx.	r0,0,r1;		/* to clear the reservation */	\
+	lwz	r11,_LINK(r1);						\
+	mtlr	r11;							\
+	lwz	r10,_CCR(r1);						\
+	mtcrf	0xff,r10;						\
+	PPC_40x_TURN_OFF_MSR_DR;					\
+	lwz	r9,_DEAR(r1);						\
+	lwz	r10,_ESR(r1);						\
+	mtspr	SPRN_DEAR,r9;						\
+	mtspr	SPRN_ESR,r10;						\
+	lwz	r11,_NIP(r1);						\
+	lwz	r12,_MSR(r1);						\
+	mtspr	exc_lvl_srr0,r11;					\
+	mtspr	exc_lvl_srr1,r12;					\
+	lwz	r9,GPR9(r1);						\
+	lwz	r12,GPR12(r1);						\
+	lwz	r10,GPR10(r1);						\
+	lwz	r11,GPR11(r1);						\
+	lwz	r1,GPR1(r1);						\
+	PPC405_ERR77_SYNC;						\
+	exc_lvl_rfi;							\
+	b	.;		/* prevent prefetch past exc_lvl_rfi */
+
+	.globl	ret_from_crit_exc
+ret_from_crit_exc:
+	RET_FROM_EXC_LEVEL(SPRN_CSRR0, SPRN_CSRR1, RFCI)
+
+#ifdef CONFIG_BOOKE
+	.globl	ret_from_debug_exc
+ret_from_debug_exc:
+	RET_FROM_EXC_LEVEL(SPRN_DSRR0, SPRN_DSRR1, RFDI)
+
+	.globl	ret_from_mcheck_exc
+ret_from_mcheck_exc:
+	RET_FROM_EXC_LEVEL(SPRN_MCSRR0, SPRN_MCSRR1, RFMCI)
+#endif /* CONFIG_BOOKE */
+
+/*
+ * Load the DBCR0 value for a task that is being ptraced,
+ * having first saved away the global DBCR0.  Note that r0
+ * has the dbcr0 value to set upon entry to this.
+ */
+load_dbcr0:
+	mfmsr	r10		/* first disable debug exceptions */
+	rlwinm	r10,r10,0,~MSR_DE
+	mtmsr	r10
+	isync
+	mfspr	r10,SPRN_DBCR0
+	lis	r11,global_dbcr0@ha
+	addi	r11,r11,global_dbcr0@l
+	stw	r10,0(r11)
+	mtspr	SPRN_DBCR0,r0
+	lwz	r10,4(r11)
+	addi	r10,r10,1
+	stw	r10,4(r11)
+	li	r11,-1
+	mtspr	SPRN_DBSR,r11	/* clear all pending debug events */
+	blr
+
+	.comm	global_dbcr0,8
+#endif /* !(CONFIG_4xx || CONFIG_BOOKE) */
+
+do_work:			/* r10 contains MSR_KERNEL here */
+	andi.	r0,r9,_TIF_NEED_RESCHED
+	beq	do_user_signal
+
+do_resched:			/* r10 contains MSR_KERNEL here */
+	ori	r10,r10,MSR_EE
+	SYNC
+	MTMSRD(r10)		/* hard-enable interrupts */
+	bl	schedule
+recheck:
+	LOAD_MSR_KERNEL(r10,MSR_KERNEL)
+	SYNC
+	MTMSRD(r10)		/* disable interrupts */
+	rlwinm	r9,r1,0,0,(31-THREAD_SHIFT)
+	lwz	r9,TI_FLAGS(r9)
+	andi.	r0,r9,_TIF_NEED_RESCHED
+	bne-	do_resched
+	andi.	r0,r9,_TIF_SIGPENDING
+	beq	restore_user
+do_user_signal:			/* r10 contains MSR_KERNEL here */
+	ori	r10,r10,MSR_EE
+	SYNC
+	MTMSRD(r10)		/* hard-enable interrupts */
+	/* save r13-r31 in the exception frame, if not already done */
+	lwz	r3,_TRAP(r1)
+	andi.	r0,r3,1
+	beq	2f
+	SAVE_NVGPRS(r1)
+	rlwinm	r3,r3,0,0,30
+	stw	r3,_TRAP(r1)
+2:	li	r3,0
+	addi	r4,r1,STACK_FRAME_OVERHEAD
+	bl	do_signal
+	REST_NVGPRS(r1)
+	b	recheck
+
+/*
+ * We come here when we are at the end of handling an exception
+ * that occurred at a place where taking an exception will lose
+ * state information, such as the contents of SRR0 and SRR1.
+ */
+nonrecoverable:
+	lis	r10,exc_exit_restart_end@ha
+	addi	r10,r10,exc_exit_restart_end@l
+	cmplw	r12,r10
+	bge	3f
+	lis	r11,exc_exit_restart@ha
+	addi	r11,r11,exc_exit_restart@l
+	cmplw	r12,r11
+	blt	3f
+	lis	r10,ee_restarts@ha
+	lwz	r12,ee_restarts@l(r10)
+	addi	r12,r12,1
+	stw	r12,ee_restarts@l(r10)
+	mr	r12,r11		/* restart at exc_exit_restart */
+	blr
+3:	/* OK, we can't recover, kill this process */
+	/* but the 601 doesn't implement the RI bit, so assume it's OK */
+BEGIN_FTR_SECTION
+	blr
+END_FTR_SECTION_IFSET(CPU_FTR_601)
+	lwz	r3,_TRAP(r1)
+	andi.	r0,r3,1
+	beq	4f
+	SAVE_NVGPRS(r1)
+	rlwinm	r3,r3,0,0,30
+	stw	r3,_TRAP(r1)
+4:	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	nonrecoverable_exception
+	/* shouldn't return */
+	b	4b
+
+	.comm	ee_restarts,4
+
+/*
+ * PROM code for specific machines follows.  Put it
+ * here so it's easy to add arch-specific sections later.
+ * -- Cort
+ */
+#ifdef CONFIG_PPC_RTAS
+/*
+ * On CHRP, the Run-Time Abstraction Services (RTAS) have to be
+ * called with the MMU off.
+ */
+_GLOBAL(enter_rtas)
+	stwu	r1,-INT_FRAME_SIZE(r1)
+	mflr	r0
+	stw	r0,INT_FRAME_SIZE+4(r1)
+	LOADADDR(r4, rtas)
+	lis	r6,1f@ha	/* physical return address for rtas */
+	addi	r6,r6,1f@l
+	tophys(r6,r6)
+	tophys(r7,r1)
+	lwz	r8,RTASENTRY(r4)
+	lwz	r4,RTASBASE(r4)
+	mfmsr	r9
+	stw	r9,8(r1)
+	LOAD_MSR_KERNEL(r0,MSR_KERNEL)
+	SYNC			/* disable interrupts so SRR0/1 */
+	MTMSRD(r0)		/* don't get trashed */
+	li	r9,MSR_KERNEL & ~(MSR_IR|MSR_DR)
+	mtlr	r6
+	mtspr	SPRN_SPRG2,r7
+	mtspr	SPRN_SRR0,r8
+	mtspr	SPRN_SRR1,r9
+	RFI
+1:	tophys(r9,r1)
+	lwz	r8,INT_FRAME_SIZE+4(r9)	/* get return address */
+	lwz	r9,8(r9)	/* original msr value */
+	FIX_SRR1(r9,r0)
+	addi	r1,r1,INT_FRAME_SIZE
+	li	r0,0
+	mtspr	SPRN_SPRG2,r0
+	mtspr	SPRN_SRR0,r8
+	mtspr	SPRN_SRR1,r9
+	RFI			/* return to caller */
+
+	.globl	machine_check_in_rtas
+machine_check_in_rtas:
+	twi	31,0,0
+	/* XXX load up BATs and panic */
+
+#endif /* CONFIG_PPC_RTAS */
diff --git a/arch/ppc64/kernel/entry.S b/arch/powerpc/kernel/entry_64.S
index e8c0bbf4d000..2d22bf03484e 100644
--- a/arch/ppc64/kernel/entry.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -42,9 +42,6 @@
 .SYS_CALL_TABLE:
 	.tc .sys_call_table[TC],.sys_call_table
 
-.SYS_CALL_TABLE32:
-	.tc .sys_call_table32[TC],.sys_call_table32
-
 /* This value is used to mark exception frames on the stack. */
 exception_marker:
 	.tc	ID_72656773_68657265[TC],0x7265677368657265
@@ -133,7 +130,7 @@ system_call:			/* label this so stack traces look sane */
 	ld	r11,.SYS_CALL_TABLE@toc(2)
 	andi.	r10,r10,_TIF_32BIT
 	beq	15f
-	ld	r11,.SYS_CALL_TABLE32@toc(2)
+	addi	r11,r11,8	/* use 32-bit syscall entries */
 	clrldi	r3,r3,32
 	clrldi	r4,r4,32
 	clrldi	r5,r5,32
@@ -141,7 +138,7 @@ system_call:			/* label this so stack traces look sane */
 	clrldi	r7,r7,32
 	clrldi	r8,r8,32
 15:
-	slwi	r0,r0,3
+	slwi	r0,r0,4
 	ldx	r10,r11,r0	/* Fetch system call handler [ptr] */
 	mtctr   r10
 	bctrl			/* Call handler */
@@ -191,8 +188,8 @@ syscall_exit_trace_cont:
 	ld	r1,GPR1(r1)
 	mtlr	r4
 	mtcr	r5
-	mtspr	SRR0,r7
-	mtspr	SRR1,r8
+	mtspr	SPRN_SRR0,r7
+	mtspr	SPRN_SRR1,r8
 	rfid
 	b	.	/* prevent speculative execution */
 
@@ -265,7 +262,7 @@ _GLOBAL(save_nvgprs)
  */
 _GLOBAL(ppc32_sigsuspend)
 	bl	.save_nvgprs
-	bl	.sys32_sigsuspend
+	bl	.compat_sys_sigsuspend
 	b	70f
 
 _GLOBAL(ppc64_rt_sigsuspend)
@@ -275,14 +272,14 @@ _GLOBAL(ppc64_rt_sigsuspend)
 
 _GLOBAL(ppc32_rt_sigsuspend)
 	bl	.save_nvgprs
-	bl	.sys32_rt_sigsuspend
+	bl	.compat_sys_rt_sigsuspend
 70:	cmpdi	0,r3,0
 	/* If it returned an error, we need to return via syscall_exit to set
 	   the SO bit in cr0 and potentially stop for ptrace. */
 	bne	syscall_exit
 	/* If sigsuspend() returns zero, we are going into a signal handler. We
 	   may need to call audit_syscall_exit() to mark the exit from sigsuspend() */
-#ifdef CONFIG_AUDIT
+#ifdef CONFIG_AUDITSYSCALL
 	ld	r3,PACACURRENT(r13)
 	ld	r4,AUDITCONTEXT(r3)
 	cmpdi	0,r4,0
@@ -310,7 +307,7 @@ _GLOBAL(ppc_clone)
 
 _GLOBAL(ppc32_swapcontext)
 	bl	.save_nvgprs
-	bl	.sys32_swapcontext
+	bl	.compat_sys_swapcontext
 	b	80f
 	
 _GLOBAL(ppc64_swapcontext)
@@ -319,11 +316,11 @@ _GLOBAL(ppc64_swapcontext)
 	b	80f
 
 _GLOBAL(ppc32_sigreturn)
-	bl	.sys32_sigreturn
+	bl	.compat_sys_sigreturn
 	b	80f
 
 _GLOBAL(ppc32_rt_sigreturn)
-	bl	.sys32_rt_sigreturn
+	bl	.compat_sys_rt_sigreturn
 	b	80f
 
 _GLOBAL(ppc64_rt_sigreturn)
@@ -531,7 +528,7 @@ restore:
 	mtctr	r3
 	mtlr	r0
 	ld	r3,_XER(r1)
-	mtspr	XER,r3
+	mtspr	SPRN_XER,r3
 
 	REST_8GPRS(5, r1)
 
@@ -543,12 +540,12 @@ restore:
 	mtmsrd	r0,1
 
 	ld	r0,_MSR(r1)
-	mtspr	SRR1,r0
+	mtspr	SPRN_SRR1,r0
 
 	ld	r2,_CCR(r1)
 	mtcrf	0xFF,r2
 	ld	r2,_NIP(r1)
-	mtspr	SRR0,r2
+	mtspr	SPRN_SRR0,r2
 
 	ld	r0,GPR0(r1)
 	ld	r2,GPR2(r1)
@@ -643,7 +640,7 @@ _GLOBAL(enter_rtas)
 	std	r4,_CCR(r1)
 	mfctr	r5
 	std	r5,_CTR(r1)
-	mfspr	r6,XER
+	mfspr	r6,SPRN_XER
 	std	r6,_XER(r1)
 	mfdar	r7
 	std	r7,_DAR(r1)
@@ -697,14 +694,14 @@ _GLOBAL(enter_rtas)
 	ld	r5,RTASENTRY(r4)	/* get the rtas->entry value */
 	ld	r4,RTASBASE(r4)		/* get the rtas->base value */
 	
-	mtspr	SRR0,r5
-	mtspr	SRR1,r6
+	mtspr	SPRN_SRR0,r5
+	mtspr	SPRN_SRR1,r6
 	rfid
 	b	.	/* prevent speculative execution */
 
 _STATIC(rtas_return_loc)
 	/* relocation is off at this point */
-	mfspr	r4,SPRG3	        /* Get PACA */
+	mfspr	r4,SPRN_SPRG3	        /* Get PACA */
 	SET_REG_TO_CONST(r5, KERNELBASE)
         sub     r4,r4,r5                /* RELOC the PACA base pointer */
 
@@ -718,8 +715,8 @@ _STATIC(rtas_return_loc)
 	LOADADDR(r3,.rtas_restore_regs)
         ld	r4,PACASAVEDMSR(r4)     /* Restore our MSR */
 
-	mtspr	SRR0,r3
-	mtspr	SRR1,r4
+	mtspr	SPRN_SRR0,r3
+	mtspr	SPRN_SRR1,r4
 	rfid
 	b	.	/* prevent speculative execution */
 
@@ -730,14 +727,14 @@ _STATIC(rtas_restore_regs)
 	REST_8GPRS(14, r1)		/* Restore the non-volatiles */
 	REST_10GPRS(22, r1)		/* ditto */
 
-	mfspr	r13,SPRG3
+	mfspr	r13,SPRN_SPRG3
 
 	ld	r4,_CCR(r1)
 	mtcr	r4
 	ld	r5,_CTR(r1)
 	mtctr	r5
 	ld	r6,_XER(r1)
-	mtspr	XER,r6
+	mtspr	SPRN_XER,r6
 	ld	r7,_DAR(r1)
 	mtdar	r7
 	ld	r8,_DSISR(r1)
@@ -774,7 +771,7 @@ _GLOBAL(enter_prom)
 	std	r4,_CCR(r1)
 	mfctr	r5
 	std	r5,_CTR(r1)
-	mfspr	r6,XER
+	mfspr	r6,SPRN_XER
 	std	r6,_XER(r1)
 	mfdar	r7
 	std	r7,_DAR(r1)
@@ -827,7 +824,7 @@ _GLOBAL(enter_prom)
 	ld	r5,_CTR(r1)
 	mtctr	r5
 	ld	r6,_XER(r1)
-	mtspr	XER,r6
+	mtspr	SPRN_XER,r6
 	ld	r7,_DAR(r1)
 	mtdar	r7
 	ld	r8,_DSISR(r1)
diff --git a/arch/ppc64/kernel/firmware.c b/arch/powerpc/kernel/firmware.c
index d8432c0fb27d..65eae752a527 100644
--- a/arch/ppc64/kernel/firmware.c
+++ b/arch/powerpc/kernel/firmware.c
@@ -1,6 +1,4 @@
 /*
- *  arch/ppc64/kernel/firmware.c
- *
  *  Extracted from cputable.c
  *
  *  Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org)
diff --git a/arch/ppc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S
index 665d7d34304c..b780b42c95fc 100644
--- a/arch/ppc/kernel/fpu.S
+++ b/arch/powerpc/kernel/fpu.S
@@ -10,7 +10,7 @@
  */
 
 #include <linux/config.h>
-#include <asm/processor.h>
+#include <asm/reg.h>
 #include <asm/page.h>
 #include <asm/mmu.h>
 #include <asm/pgtable.h>
@@ -27,13 +27,9 @@
  * Load up this task's FP registers from its thread_struct,
  * enable the FPU for the current task and return to the task.
  */
-	.globl	load_up_fpu
-load_up_fpu:
+_GLOBAL(load_up_fpu)
 	mfmsr	r5
 	ori	r5,r5,MSR_FP
-#ifdef CONFIG_PPC64BRIDGE
-	clrldi	r5,r5,1			/* turn off 64-bit mode */
-#endif /* CONFIG_PPC64BRIDGE */
 	SYNC
 	MTMSRD(r5)			/* enable use of fpu now */
 	isync
@@ -43,67 +39,57 @@ load_up_fpu:
  * to another.  Instead we call giveup_fpu in switch_to.
  */
 #ifndef CONFIG_SMP
-	tophys(r6,0)			/* get __pa constant */
-	addis	r3,r6,last_task_used_math@ha
-	lwz	r4,last_task_used_math@l(r3)
-	cmpwi	0,r4,0
+	LOADBASE(r3, last_task_used_math)
+	toreal(r3)
+	PPC_LL	r4,OFF(last_task_used_math)(r3)
+	PPC_LCMPI	0,r4,0
 	beq	1f
-	add	r4,r4,r6
+	toreal(r4)
 	addi	r4,r4,THREAD		/* want last_task_used_math->thread */
 	SAVE_32FPRS(0, r4)
 	mffs	fr0
-	stfd	fr0,THREAD_FPSCR-4(r4)
-	lwz	r5,PT_REGS(r4)
-	add	r5,r5,r6
-	lwz	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+	stfd	fr0,THREAD_FPSCR(r4)
+	PPC_LL	r5,PT_REGS(r4)
+	toreal(r5)
+	PPC_LL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
 	li	r10,MSR_FP|MSR_FE0|MSR_FE1
 	andc	r4,r4,r10		/* disable FP for previous task */
-	stw	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+	PPC_STL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
 1:
 #endif /* CONFIG_SMP */
 	/* enable use of FP after return */
+#ifdef CONFIG_PPC32
 	mfspr	r5,SPRN_SPRG3		/* current task's THREAD (phys) */
 	lwz	r4,THREAD_FPEXC_MODE(r5)
 	ori	r9,r9,MSR_FP		/* enable FP for current */
 	or	r9,r9,r4
-	lfd	fr0,THREAD_FPSCR-4(r5)
+#else
+	ld	r4,PACACURRENT(r13)
+	addi	r5,r4,THREAD		/* Get THREAD */
+	ld	r4,THREAD_FPEXC_MODE(r5)
+	ori	r12,r12,MSR_FP
+	or	r12,r12,r4
+	std	r12,_MSR(r1)
+#endif
+	lfd	fr0,THREAD_FPSCR(r5)
 	mtfsf	0xff,fr0
 	REST_32FPRS(0, r5)
 #ifndef CONFIG_SMP
 	subi	r4,r5,THREAD
-	sub	r4,r4,r6
-	stw	r4,last_task_used_math@l(r3)
+	fromreal(r4)
+	PPC_STL	r4,OFF(last_task_used_math)(r3)
 #endif /* CONFIG_SMP */
 	/* restore registers and return */
 	/* we haven't used ctr or xer or lr */
 	b	fast_exception_return
 
 /*
- * FP unavailable trap from kernel - print a message, but let
- * the task use FP in the kernel until it returns to user mode.
- */
- 	.globl	KernelFP
-KernelFP:
-	lwz	r3,_MSR(r1)
-	ori	r3,r3,MSR_FP
-	stw	r3,_MSR(r1)		/* enable use of FP after return */
-	lis	r3,86f@h
-	ori	r3,r3,86f@l
-	mr	r4,r2			/* current */
-	lwz	r5,_NIP(r1)
-	bl	printk
-	b	ret_from_except
-86:	.string	"floating point used in kernel (task=%p, pc=%x)\n"
-	.align	4,0
-
-/*
  * giveup_fpu(tsk)
  * Disable FP for the task given as the argument,
  * and save the floating-point registers in its thread_struct.
  * Enables the FPU for use in the kernel on return.
  */
-	.globl	giveup_fpu
-giveup_fpu:
+_GLOBAL(giveup_fpu)
 	mfmsr	r5
 	ori	r5,r5,MSR_FP
 	SYNC_601
@@ -111,23 +97,48 @@ giveup_fpu:
 	MTMSRD(r5)			/* enable use of fpu now */
 	SYNC_601
 	isync
-	cmpwi	0,r3,0
+	PPC_LCMPI	0,r3,0
 	beqlr-				/* if no previous owner, done */
 	addi	r3,r3,THREAD	        /* want THREAD of task */
-	lwz	r5,PT_REGS(r3)
-	cmpwi	0,r5,0
+	PPC_LL	r5,PT_REGS(r3)
+	PPC_LCMPI	0,r5,0
 	SAVE_32FPRS(0, r3)
 	mffs	fr0
-	stfd	fr0,THREAD_FPSCR-4(r3)
+	stfd	fr0,THREAD_FPSCR(r3)
 	beq	1f
-	lwz	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+	PPC_LL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
 	li	r3,MSR_FP|MSR_FE0|MSR_FE1
 	andc	r4,r4,r3		/* disable FP for previous task */
-	stw	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+	PPC_STL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
 1:
 #ifndef CONFIG_SMP
 	li	r5,0
-	lis	r4,last_task_used_math@ha
-	stw	r5,last_task_used_math@l(r4)
+	LOADBASE(r4,last_task_used_math)
+	PPC_STL	r5,OFF(last_task_used_math)(r4)
 #endif /* CONFIG_SMP */
 	blr
+
+/*
+ * These are used in the alignment trap handler when emulating
+ * single-precision loads and stores.
+ * We restore and save the fpscr so the task gets the same result
+ * and exceptions as if the cpu had performed the load or store.
+ */
+
+_GLOBAL(cvt_fd)
+	lfd	0,THREAD_FPSCR(r5)	/* load up fpscr value */
+	mtfsf	0xff,0
+	lfs	0,0(r3)
+	stfd	0,0(r4)
+	mffs	0
+	stfd	0,THREAD_FPSCR(r5)	/* save new fpscr value */
+	blr
+
+_GLOBAL(cvt_df)
+	lfd	0,THREAD_FPSCR(r5)	/* load up fpscr value */
+	mtfsf	0xff,0
+	lfd	0,0(r3)
+	stfs	0,0(r4)
+	mffs	0
+	stfd	0,THREAD_FPSCR(r5)	/* save new fpscr value */
+	blr
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
new file mode 100644
index 000000000000..ccdf94731e30
--- /dev/null
+++ b/arch/powerpc/kernel/head_32.S
@@ -0,0 +1,1382 @@
+/*
+ *  PowerPC version
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
+ *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
+ *  Adapted for Power Macintosh by Paul Mackerras.
+ *  Low-level exception handlers and MMU support
+ *  rewritten by Paul Mackerras.
+ *    Copyright (C) 1996 Paul Mackerras.
+ *  MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
+ *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ *  This file contains the low-level support and setup for the
+ *  PowerPC platform, including trap and interrupt dispatch.
+ *  (The PPC 8xx embedded CPUs use head_8xx.S instead.)
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/pgtable.h>
+#include <asm/cputable.h>
+#include <asm/cache.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+
+#ifdef CONFIG_APUS
+#include <asm/amigappc.h>
+#endif
+
+/* 601 only have IBAT; cr0.eq is set on 601 when using this macro */
+#define LOAD_BAT(n, reg, RA, RB)	\
+	/* see the comment for clear_bats() -- Cort */ \
+	li	RA,0;			\
+	mtspr	SPRN_IBAT##n##U,RA;	\
+	mtspr	SPRN_DBAT##n##U,RA;	\
+	lwz	RA,(n*16)+0(reg);	\
+	lwz	RB,(n*16)+4(reg);	\
+	mtspr	SPRN_IBAT##n##U,RA;	\
+	mtspr	SPRN_IBAT##n##L,RB;	\
+	beq	1f;			\
+	lwz	RA,(n*16)+8(reg);	\
+	lwz	RB,(n*16)+12(reg);	\
+	mtspr	SPRN_DBAT##n##U,RA;	\
+	mtspr	SPRN_DBAT##n##L,RB;	\
+1:
+
+	.text
+	.stabs	"arch/powerpc/kernel/",N_SO,0,0,0f
+	.stabs	"head_32.S",N_SO,0,0,0f
+0:
+	.globl	_stext
+_stext:
+
+/*
+ * _start is defined this way because the XCOFF loader in the OpenFirmware
+ * on the powermac expects the entry point to be a procedure descriptor.
+ */
+	.text
+	.globl	_start
+_start:
+	/*
+	 * These are here for legacy reasons, the kernel used to
+	 * need to look like a coff function entry for the pmac
+	 * but we're always started by some kind of bootloader now.
+	 *  -- Cort
+	 */
+	nop	/* used by __secondary_hold on prep (mtx) and chrp smp */
+	nop	/* used by __secondary_hold on prep (mtx) and chrp smp */
+	nop
+
+/* PMAC
+ * Enter here with the kernel text, data and bss loaded starting at
+ * 0, running with virtual == physical mapping.
+ * r5 points to the prom entry point (the client interface handler
+ * address).  Address translation is turned on, with the prom
+ * managing the hash table.  Interrupts are disabled.  The stack
+ * pointer (r1) points to just below the end of the half-meg region
+ * from 0x380000 - 0x400000, which is mapped in already.
+ *
+ * If we are booted from MacOS via BootX, we enter with the kernel
+ * image loaded somewhere, and the following values in registers:
+ *  r3: 'BooX' (0x426f6f58)
+ *  r4: virtual address of boot_infos_t
+ *  r5: 0
+ *
+ * APUS
+ *   r3: 'APUS'
+ *   r4: physical address of memory base
+ *   Linux/m68k style BootInfo structure at &_end.
+ *
+ * PREP
+ * This is jumped to on prep systems right after the kernel is relocated
+ * to its proper place in memory by the boot loader.  The expected layout
+ * of the regs is:
+ *   r3: ptr to residual data
+ *   r4: initrd_start or if no initrd then 0
+ *   r5: initrd_end - unused if r4 is 0
+ *   r6: Start of command line string
+ *   r7: End of command line string
+ *
+ * This just gets a minimal mmu environment setup so we can call
+ * start_here() to do the real work.
+ * -- Cort
+ */
+
+	.globl	__start
+__start:
+/*
+ * We have to do any OF calls before we map ourselves to KERNELBASE,
+ * because OF may have I/O devices mapped into that area
+ * (particularly on CHRP).
+ */
+	cmpwi	0,r5,0
+	beq	1f
+	bl	prom_init
+	trap
+
+1:	mr	r31,r3			/* save parameters */
+	mr	r30,r4
+	li	r24,0			/* cpu # */
+
+/*
+ * early_init() does the early machine identification and does
+ * the necessary low-level setup and clears the BSS
+ *  -- Cort <cort@fsmlabs.com>
+ */
+	bl	early_init
+
+#ifdef CONFIG_APUS
+/* On APUS the __va/__pa constants need to be set to the correct
+ * values before continuing.
+ */
+	mr	r4,r30
+	bl	fix_mem_constants
+#endif /* CONFIG_APUS */
+
+/* Switch MMU off, clear BATs and flush TLB. At this point, r3 contains
+ * the physical address we are running at, returned by early_init()
+ */
+ 	bl	mmu_off
+__after_mmu_off:
+	bl	clear_bats
+	bl	flush_tlbs
+
+	bl	initial_bats
+
+/*
+ * Call setup_cpu for CPU 0 and initialize 6xx Idle
+ */
+	bl	reloc_offset
+	li	r24,0			/* cpu# */
+	bl	call_setup_cpu		/* Call setup_cpu for this CPU */
+#ifdef CONFIG_6xx
+	bl	reloc_offset
+	bl	init_idle_6xx
+#endif /* CONFIG_6xx */
+
+
+#ifndef CONFIG_APUS
+/*
+ * We need to run with _start at physical address 0.
+ * On CHRP, we are loaded at 0x10000 since OF on CHRP uses
+ * the exception vectors at 0 (and therefore this copy
+ * overwrites OF's exception vectors with our own).
+ * The MMU is off at this point.
+ */
+	bl	reloc_offset
+	mr	r26,r3
+	addis	r4,r3,KERNELBASE@h	/* current address of _start */
+	cmpwi	0,r4,0			/* are we already running at 0? */
+	bne	relocate_kernel
+#endif /* CONFIG_APUS */
+/*
+ * we now have the 1st 16M of ram mapped with the bats.
+ * prep needs the mmu to be turned on here, but pmac already has it on.
+ * this shouldn't bother the pmac since it just gets turned on again
+ * as we jump to our code at KERNELBASE. -- Cort
+ * Actually no, pmac doesn't have it on any more. BootX enters with MMU
+ * off, and in other cases, we now turn it off before changing BATs above.
+ */
+turn_on_mmu:
+	mfmsr	r0
+	ori	r0,r0,MSR_DR|MSR_IR
+	mtspr	SPRN_SRR1,r0
+	lis	r0,start_here@h
+	ori	r0,r0,start_here@l
+	mtspr	SPRN_SRR0,r0
+	SYNC
+	RFI				/* enables MMU */
+
+/*
+ * We need __secondary_hold as a place to hold the other cpus on
+ * an SMP machine, even when we are running a UP kernel.
+ */
+	. = 0xc0			/* for prep bootloader */
+	li	r3,1			/* MTX only has 1 cpu */
+	.globl	__secondary_hold
+__secondary_hold:
+	/* tell the master we're here */
+	stw	r3,__secondary_hold_acknowledge@l(0)
+#ifdef CONFIG_SMP
+100:	lwz	r4,0(0)
+	/* wait until we're told to start */
+	cmpw	0,r4,r3
+	bne	100b
+	/* our cpu # was at addr 0 - go */
+	mr	r24,r3			/* cpu # */
+	b	__secondary_start
+#else
+	b	.
+#endif /* CONFIG_SMP */
+
+	.globl	__secondary_hold_spinloop
+__secondary_hold_spinloop:
+	.long	0
+	.globl	__secondary_hold_acknowledge
+__secondary_hold_acknowledge:
+	.long	-1
+
+/*
+ * Exception entry code.  This code runs with address translation
+ * turned off, i.e. using physical addresses.
+ * We assume sprg3 has the physical address of the current
+ * task's thread_struct.
+ */
+#define EXCEPTION_PROLOG	\
+	mtspr	SPRN_SPRG0,r10;	\
+	mtspr	SPRN_SPRG1,r11;	\
+	mfcr	r10;		\
+	EXCEPTION_PROLOG_1;	\
+	EXCEPTION_PROLOG_2
+
+#define EXCEPTION_PROLOG_1	\
+	mfspr	r11,SPRN_SRR1;		/* check whether user or kernel */ \
+	andi.	r11,r11,MSR_PR;	\
+	tophys(r11,r1);			/* use tophys(r1) if kernel */ \
+	beq	1f;		\
+	mfspr	r11,SPRN_SPRG3;	\
+	lwz	r11,THREAD_INFO-THREAD(r11);	\
+	addi	r11,r11,THREAD_SIZE;	\
+	tophys(r11,r11);	\
+1:	subi	r11,r11,INT_FRAME_SIZE	/* alloc exc. frame */
+
+
+#define EXCEPTION_PROLOG_2	\
+	CLR_TOP32(r11);		\
+	stw	r10,_CCR(r11);		/* save registers */ \
+	stw	r12,GPR12(r11);	\
+	stw	r9,GPR9(r11);	\
+	mfspr	r10,SPRN_SPRG0;	\
+	stw	r10,GPR10(r11);	\
+	mfspr	r12,SPRN_SPRG1;	\
+	stw	r12,GPR11(r11);	\
+	mflr	r10;		\
+	stw	r10,_LINK(r11);	\
+	mfspr	r12,SPRN_SRR0;	\
+	mfspr	r9,SPRN_SRR1;	\
+	stw	r1,GPR1(r11);	\
+	stw	r1,0(r11);	\
+	tovirt(r1,r11);			/* set new kernel sp */	\
+	li	r10,MSR_KERNEL & ~(MSR_IR|MSR_DR); /* can take exceptions */ \
+	MTMSRD(r10);			/* (except for mach check in rtas) */ \
+	stw	r0,GPR0(r11);	\
+	lis	r10,0x7265;		/* put exception frame marker */ \
+	addi	r10,r10,0x6773;	\
+	stw	r10,8(r11);	\
+	SAVE_4GPRS(3, r11);	\
+	SAVE_2GPRS(7, r11)
+
+/*
+ * Note: code which follows this uses cr0.eq (set if from kernel),
+ * r11, r12 (SRR0), and r9 (SRR1).
+ *
+ * Note2: once we have set r1 we are in a position to take exceptions
+ * again, and we could thus set MSR:RI at that point.
+ */
+
+/*
+ * Exception vectors.
+ */
+#define EXCEPTION(n, label, hdlr, xfer)		\
+	. = n;					\
+label:						\
+	EXCEPTION_PROLOG;			\
+	addi	r3,r1,STACK_FRAME_OVERHEAD;	\
+	xfer(n, hdlr)
+
+#define EXC_XFER_TEMPLATE(n, hdlr, trap, copyee, tfer, ret)	\
+	li	r10,trap;					\
+	stw	r10,_TRAP(r11);					\
+	li	r10,MSR_KERNEL;					\
+	copyee(r10, r9);					\
+	bl	tfer;						\
+i##n:								\
+	.long	hdlr;						\
+	.long	ret
+
+#define COPY_EE(d, s)		rlwimi d,s,0,16,16
+#define NOCOPY(d, s)
+
+#define EXC_XFER_STD(n, hdlr)		\
+	EXC_XFER_TEMPLATE(n, hdlr, n, NOCOPY, transfer_to_handler_full,	\
+			  ret_from_except_full)
+
+#define EXC_XFER_LITE(n, hdlr)		\
+	EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \
+			  ret_from_except)
+
+#define EXC_XFER_EE(n, hdlr)		\
+	EXC_XFER_TEMPLATE(n, hdlr, n, COPY_EE, transfer_to_handler_full, \
+			  ret_from_except_full)
+
+#define EXC_XFER_EE_LITE(n, hdlr)	\
+	EXC_XFER_TEMPLATE(n, hdlr, n+1, COPY_EE, transfer_to_handler, \
+			  ret_from_except)
+
+/* System reset */
+/* core99 pmac starts the seconary here by changing the vector, and
+   putting it back to what it was (unknown_exception) when done.  */
+#if defined(CONFIG_GEMINI) && defined(CONFIG_SMP)
+	. = 0x100
+	b	__secondary_start_gemini
+#else
+	EXCEPTION(0x100, Reset, unknown_exception, EXC_XFER_STD)
+#endif
+
+/* Machine check */
+/*
+ * On CHRP, this is complicated by the fact that we could get a
+ * machine check inside RTAS, and we have no guarantee that certain
+ * critical registers will have the values we expect.  The set of
+ * registers that might have bad values includes all the GPRs
+ * and all the BATs.  We indicate that we are in RTAS by putting
+ * a non-zero value, the address of the exception frame to use,
+ * in SPRG2.  The machine check handler checks SPRG2 and uses its
+ * value if it is non-zero.  If we ever needed to free up SPRG2,
+ * we could use a field in the thread_info or thread_struct instead.
+ * (Other exception handlers assume that r1 is a valid kernel stack
+ * pointer when we take an exception from supervisor mode.)
+ *	-- paulus.
+ */
+	. = 0x200
+	mtspr	SPRN_SPRG0,r10
+	mtspr	SPRN_SPRG1,r11
+	mfcr	r10
+#ifdef CONFIG_PPC_CHRP
+	mfspr	r11,SPRN_SPRG2
+	cmpwi	0,r11,0
+	bne	7f
+#endif /* CONFIG_PPC_CHRP */
+	EXCEPTION_PROLOG_1
+7:	EXCEPTION_PROLOG_2
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+#ifdef CONFIG_PPC_CHRP
+	mfspr	r4,SPRN_SPRG2
+	cmpwi	cr1,r4,0
+	bne	cr1,1f
+#endif
+	EXC_XFER_STD(0x200, machine_check_exception)
+#ifdef CONFIG_PPC_CHRP
+1:	b	machine_check_in_rtas
+#endif
+
+/* Data access exception. */
+	. = 0x300
+DataAccess:
+	EXCEPTION_PROLOG
+	mfspr	r10,SPRN_DSISR
+	andis.	r0,r10,0xa470		/* weird error? */
+	bne	1f			/* if not, try to put a PTE */
+	mfspr	r4,SPRN_DAR		/* into the hash table */
+	rlwinm	r3,r10,32-15,21,21	/* DSISR_STORE -> _PAGE_RW */
+	bl	hash_page
+1:	stw	r10,_DSISR(r11)
+	mr	r5,r10
+	mfspr	r4,SPRN_DAR
+	EXC_XFER_EE_LITE(0x300, handle_page_fault)
+
+
+/* Instruction access exception. */
+	. = 0x400
+InstructionAccess:
+	EXCEPTION_PROLOG
+	andis.	r0,r9,0x4000		/* no pte found? */
+	beq	1f			/* if so, try to put a PTE */
+	li	r3,0			/* into the hash table */
+	mr	r4,r12			/* SRR0 is fault address */
+	bl	hash_page
+1:	mr	r4,r12
+	mr	r5,r9
+	EXC_XFER_EE_LITE(0x400, handle_page_fault)
+
+/* External interrupt */
+	EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
+
+/* Alignment exception */
+	. = 0x600
+Alignment:
+	EXCEPTION_PROLOG
+	mfspr	r4,SPRN_DAR
+	stw	r4,_DAR(r11)
+	mfspr	r5,SPRN_DSISR
+	stw	r5,_DSISR(r11)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_EE(0x600, alignment_exception)
+
+/* Program check exception */
+	EXCEPTION(0x700, ProgramCheck, program_check_exception, EXC_XFER_STD)
+
+/* Floating-point unavailable */
+	. = 0x800
+FPUnavailable:
+	EXCEPTION_PROLOG
+	bne	load_up_fpu		/* if from user, just load it up */
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_EE_LITE(0x800, kernel_fp_unavailable_exception)
+
+/* Decrementer */
+	EXCEPTION(0x900, Decrementer, timer_interrupt, EXC_XFER_LITE)
+
+	EXCEPTION(0xa00, Trap_0a, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0xb00, Trap_0b, unknown_exception, EXC_XFER_EE)
+
+/* System call */
+	. = 0xc00
+SystemCall:
+	EXCEPTION_PROLOG
+	EXC_XFER_EE_LITE(0xc00, DoSyscall)
+
+/* Single step - not used on 601 */
+	EXCEPTION(0xd00, SingleStep, single_step_exception, EXC_XFER_STD)
+	EXCEPTION(0xe00, Trap_0e, unknown_exception, EXC_XFER_EE)
+
+/*
+ * The Altivec unavailable trap is at 0x0f20.  Foo.
+ * We effectively remap it to 0x3000.
+ * We include an altivec unavailable exception vector even if
+ * not configured for Altivec, so that you can't panic a
+ * non-altivec kernel running on a machine with altivec just
+ * by executing an altivec instruction.
+ */
+	. = 0xf00
+	b	Trap_0f
+
+	. = 0xf20
+	b	AltiVecUnavailable
+
+Trap_0f:
+	EXCEPTION_PROLOG
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_EE(0xf00, unknown_exception)
+
+/*
+ * Handle TLB miss for instruction on 603/603e.
+ * Note: we get an alternate set of r0 - r3 to use automatically.
+ */
+	. = 0x1000
+InstructionTLBMiss:
+/*
+ * r0:	stored ctr
+ * r1:	linux style pte ( later becomes ppc hardware pte )
+ * r2:	ptr to linux-style pte
+ * r3:	scratch
+ */
+	mfctr	r0
+	/* Get PTE (linux-style) and check access */
+	mfspr	r3,SPRN_IMISS
+	lis	r1,KERNELBASE@h		/* check if kernel address */
+	cmplw	0,r3,r1
+	mfspr	r2,SPRN_SPRG3
+	li	r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */
+	lwz	r2,PGDIR(r2)
+	blt+	112f
+	lis	r2,swapper_pg_dir@ha	/* if kernel address, use */
+	addi	r2,r2,swapper_pg_dir@l	/* kernel page table */
+	mfspr	r1,SPRN_SRR1		/* and MSR_PR bit from SRR1 */
+	rlwinm	r1,r1,32-12,29,29	/* shift MSR_PR to _PAGE_USER posn */
+112:	tophys(r2,r2)
+	rlwimi	r2,r3,12,20,29		/* insert top 10 bits of address */
+	lwz	r2,0(r2)		/* get pmd entry */
+	rlwinm.	r2,r2,0,0,19		/* extract address of pte page */
+	beq-	InstructionAddressInvalid	/* return if no mapping */
+	rlwimi	r2,r3,22,20,29		/* insert next 10 bits of address */
+	lwz	r3,0(r2)		/* get linux-style pte */
+	andc.	r1,r1,r3		/* check access & ~permission */
+	bne-	InstructionAddressInvalid /* return if access not permitted */
+	ori	r3,r3,_PAGE_ACCESSED	/* set _PAGE_ACCESSED in pte */
+	/*
+	 * NOTE! We are assuming this is not an SMP system, otherwise
+	 * we would need to update the pte atomically with lwarx/stwcx.
+	 */
+	stw	r3,0(r2)		/* update PTE (accessed bit) */
+	/* Convert linux-style PTE to low word of PPC-style PTE */
+	rlwinm	r1,r3,32-10,31,31	/* _PAGE_RW -> PP lsb */
+	rlwinm	r2,r3,32-7,31,31	/* _PAGE_DIRTY -> PP lsb */
+	and	r1,r1,r2		/* writable if _RW and _DIRTY */
+	rlwimi	r3,r3,32-1,30,30	/* _PAGE_USER -> PP msb */
+	rlwimi	r3,r3,32-1,31,31	/* _PAGE_USER -> PP lsb */
+	ori	r1,r1,0xe14		/* clear out reserved bits and M */
+	andc	r1,r3,r1		/* PP = user? (rw&dirty? 2: 3): 0 */
+	mtspr	SPRN_RPA,r1
+	mfspr	r3,SPRN_IMISS
+	tlbli	r3
+	mfspr	r3,SPRN_SRR1		/* Need to restore CR0 */
+	mtcrf	0x80,r3
+	rfi
+InstructionAddressInvalid:
+	mfspr	r3,SPRN_SRR1
+	rlwinm	r1,r3,9,6,6	/* Get load/store bit */
+
+	addis	r1,r1,0x2000
+	mtspr	SPRN_DSISR,r1	/* (shouldn't be needed) */
+	mtctr	r0		/* Restore CTR */
+	andi.	r2,r3,0xFFFF	/* Clear upper bits of SRR1 */
+	or	r2,r2,r1
+	mtspr	SPRN_SRR1,r2
+	mfspr	r1,SPRN_IMISS	/* Get failing address */
+	rlwinm.	r2,r2,0,31,31	/* Check for little endian access */
+	rlwimi	r2,r2,1,30,30	/* change 1 -> 3 */
+	xor	r1,r1,r2
+	mtspr	SPRN_DAR,r1	/* Set fault address */
+	mfmsr	r0		/* Restore "normal" registers */
+	xoris	r0,r0,MSR_TGPR>>16
+	mtcrf	0x80,r3		/* Restore CR0 */
+	mtmsr	r0
+	b	InstructionAccess
+
+/*
+ * Handle TLB miss for DATA Load operation on 603/603e
+ */
+	. = 0x1100
+DataLoadTLBMiss:
+/*
+ * r0:	stored ctr
+ * r1:	linux style pte ( later becomes ppc hardware pte )
+ * r2:	ptr to linux-style pte
+ * r3:	scratch
+ */
+	mfctr	r0
+	/* Get PTE (linux-style) and check access */
+	mfspr	r3,SPRN_DMISS
+	lis	r1,KERNELBASE@h		/* check if kernel address */
+	cmplw	0,r3,r1
+	mfspr	r2,SPRN_SPRG3
+	li	r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */
+	lwz	r2,PGDIR(r2)
+	blt+	112f
+	lis	r2,swapper_pg_dir@ha	/* if kernel address, use */
+	addi	r2,r2,swapper_pg_dir@l	/* kernel page table */
+	mfspr	r1,SPRN_SRR1		/* and MSR_PR bit from SRR1 */
+	rlwinm	r1,r1,32-12,29,29	/* shift MSR_PR to _PAGE_USER posn */
+112:	tophys(r2,r2)
+	rlwimi	r2,r3,12,20,29		/* insert top 10 bits of address */
+	lwz	r2,0(r2)		/* get pmd entry */
+	rlwinm.	r2,r2,0,0,19		/* extract address of pte page */
+	beq-	DataAddressInvalid	/* return if no mapping */
+	rlwimi	r2,r3,22,20,29		/* insert next 10 bits of address */
+	lwz	r3,0(r2)		/* get linux-style pte */
+	andc.	r1,r1,r3		/* check access & ~permission */
+	bne-	DataAddressInvalid	/* return if access not permitted */
+	ori	r3,r3,_PAGE_ACCESSED	/* set _PAGE_ACCESSED in pte */
+	/*
+	 * NOTE! We are assuming this is not an SMP system, otherwise
+	 * we would need to update the pte atomically with lwarx/stwcx.
+	 */
+	stw	r3,0(r2)		/* update PTE (accessed bit) */
+	/* Convert linux-style PTE to low word of PPC-style PTE */
+	rlwinm	r1,r3,32-10,31,31	/* _PAGE_RW -> PP lsb */
+	rlwinm	r2,r3,32-7,31,31	/* _PAGE_DIRTY -> PP lsb */
+	and	r1,r1,r2		/* writable if _RW and _DIRTY */
+	rlwimi	r3,r3,32-1,30,30	/* _PAGE_USER -> PP msb */
+	rlwimi	r3,r3,32-1,31,31	/* _PAGE_USER -> PP lsb */
+	ori	r1,r1,0xe14		/* clear out reserved bits and M */
+	andc	r1,r3,r1		/* PP = user? (rw&dirty? 2: 3): 0 */
+	mtspr	SPRN_RPA,r1
+	mfspr	r3,SPRN_DMISS
+	tlbld	r3
+	mfspr	r3,SPRN_SRR1		/* Need to restore CR0 */
+	mtcrf	0x80,r3
+	rfi
+DataAddressInvalid:
+	mfspr	r3,SPRN_SRR1
+	rlwinm	r1,r3,9,6,6	/* Get load/store bit */
+	addis	r1,r1,0x2000
+	mtspr	SPRN_DSISR,r1
+	mtctr	r0		/* Restore CTR */
+	andi.	r2,r3,0xFFFF	/* Clear upper bits of SRR1 */
+	mtspr	SPRN_SRR1,r2
+	mfspr	r1,SPRN_DMISS	/* Get failing address */
+	rlwinm.	r2,r2,0,31,31	/* Check for little endian access */
+	beq	20f		/* Jump if big endian */
+	xori	r1,r1,3
+20:	mtspr	SPRN_DAR,r1	/* Set fault address */
+	mfmsr	r0		/* Restore "normal" registers */
+	xoris	r0,r0,MSR_TGPR>>16
+	mtcrf	0x80,r3		/* Restore CR0 */
+	mtmsr	r0
+	b	DataAccess
+
+/*
+ * Handle TLB miss for DATA Store on 603/603e
+ */
+	. = 0x1200
+DataStoreTLBMiss:
+/*
+ * r0:	stored ctr
+ * r1:	linux style pte ( later becomes ppc hardware pte )
+ * r2:	ptr to linux-style pte
+ * r3:	scratch
+ */
+	mfctr	r0
+	/* Get PTE (linux-style) and check access */
+	mfspr	r3,SPRN_DMISS
+	lis	r1,KERNELBASE@h		/* check if kernel address */
+	cmplw	0,r3,r1
+	mfspr	r2,SPRN_SPRG3
+	li	r1,_PAGE_RW|_PAGE_USER|_PAGE_PRESENT /* access flags */
+	lwz	r2,PGDIR(r2)
+	blt+	112f
+	lis	r2,swapper_pg_dir@ha	/* if kernel address, use */
+	addi	r2,r2,swapper_pg_dir@l	/* kernel page table */
+	mfspr	r1,SPRN_SRR1		/* and MSR_PR bit from SRR1 */
+	rlwinm	r1,r1,32-12,29,29	/* shift MSR_PR to _PAGE_USER posn */
+112:	tophys(r2,r2)
+	rlwimi	r2,r3,12,20,29		/* insert top 10 bits of address */
+	lwz	r2,0(r2)		/* get pmd entry */
+	rlwinm.	r2,r2,0,0,19		/* extract address of pte page */
+	beq-	DataAddressInvalid	/* return if no mapping */
+	rlwimi	r2,r3,22,20,29		/* insert next 10 bits of address */
+	lwz	r3,0(r2)		/* get linux-style pte */
+	andc.	r1,r1,r3		/* check access & ~permission */
+	bne-	DataAddressInvalid	/* return if access not permitted */
+	ori	r3,r3,_PAGE_ACCESSED|_PAGE_DIRTY
+	/*
+	 * NOTE! We are assuming this is not an SMP system, otherwise
+	 * we would need to update the pte atomically with lwarx/stwcx.
+	 */
+	stw	r3,0(r2)		/* update PTE (accessed/dirty bits) */
+	/* Convert linux-style PTE to low word of PPC-style PTE */
+	rlwimi	r3,r3,32-1,30,30	/* _PAGE_USER -> PP msb */
+	li	r1,0xe15		/* clear out reserved bits and M */
+	andc	r1,r3,r1		/* PP = user? 2: 0 */
+	mtspr	SPRN_RPA,r1
+	mfspr	r3,SPRN_DMISS
+	tlbld	r3
+	mfspr	r3,SPRN_SRR1		/* Need to restore CR0 */
+	mtcrf	0x80,r3
+	rfi
+
+#ifndef CONFIG_ALTIVEC
+#define altivec_assist_exception	unknown_exception
+#endif
+
+	EXCEPTION(0x1300, Trap_13, instruction_breakpoint_exception, EXC_XFER_EE)
+	EXCEPTION(0x1400, SMI, SMIException, EXC_XFER_EE)
+	EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1600, Trap_16, altivec_assist_exception, EXC_XFER_EE)
+	EXCEPTION(0x1700, Trap_17, TAUException, EXC_XFER_STD)
+	EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1a00, Trap_1a, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1b00, Trap_1b, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1c00, Trap_1c, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1d00, Trap_1d, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1e00, Trap_1e, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1f00, Trap_1f, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x2000, RunMode, RunModeException, EXC_XFER_EE)
+	EXCEPTION(0x2100, Trap_21, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x2200, Trap_22, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x2300, Trap_23, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x2400, Trap_24, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x2500, Trap_25, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x2600, Trap_26, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x2700, Trap_27, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x2800, Trap_28, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x2900, Trap_29, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x2a00, Trap_2a, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x2b00, Trap_2b, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x2c00, Trap_2c, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x2d00, Trap_2d, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x2e00, Trap_2e, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x2f00, MOLTrampoline, unknown_exception, EXC_XFER_EE_LITE)
+
+	.globl mol_trampoline
+	.set mol_trampoline, i0x2f00
+
+	. = 0x3000
+
+AltiVecUnavailable:
+	EXCEPTION_PROLOG
+#ifdef CONFIG_ALTIVEC
+	bne	load_up_altivec		/* if from user, just load it up */
+#endif /* CONFIG_ALTIVEC */
+	EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception)
+
+#ifdef CONFIG_ALTIVEC
+/* Note that the AltiVec support is closely modeled after the FP
+ * support.  Changes to one are likely to be applicable to the
+ * other!  */
+load_up_altivec:
+/*
+ * Disable AltiVec for the task which had AltiVec previously,
+ * and save its AltiVec registers in its thread_struct.
+ * Enables AltiVec for use in the kernel on return.
+ * On SMP we know the AltiVec units are free, since we give it up every
+ * switch.  -- Kumar
+ */
+	mfmsr	r5
+	oris	r5,r5,MSR_VEC@h
+	MTMSRD(r5)			/* enable use of AltiVec now */
+	isync
+/*
+ * For SMP, we don't do lazy AltiVec switching because it just gets too
+ * horrendously complex, especially when a task switches from one CPU
+ * to another.  Instead we call giveup_altivec in switch_to.
+ */
+#ifndef CONFIG_SMP
+	tophys(r6,0)
+	addis	r3,r6,last_task_used_altivec@ha
+	lwz	r4,last_task_used_altivec@l(r3)
+	cmpwi	0,r4,0
+	beq	1f
+	add	r4,r4,r6
+	addi	r4,r4,THREAD	/* want THREAD of last_task_used_altivec */
+	SAVE_32VRS(0,r10,r4)
+	mfvscr	vr0
+	li	r10,THREAD_VSCR
+	stvx	vr0,r10,r4
+	lwz	r5,PT_REGS(r4)
+	add	r5,r5,r6
+	lwz	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+	lis	r10,MSR_VEC@h
+	andc	r4,r4,r10	/* disable altivec for previous task */
+	stw	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#endif /* CONFIG_SMP */
+	/* enable use of AltiVec after return */
+	oris	r9,r9,MSR_VEC@h
+	mfspr	r5,SPRN_SPRG3		/* current task's THREAD (phys) */
+	li	r4,1
+	li	r10,THREAD_VSCR
+	stw	r4,THREAD_USED_VR(r5)
+	lvx	vr0,r10,r5
+	mtvscr	vr0
+	REST_32VRS(0,r10,r5)
+#ifndef CONFIG_SMP
+	subi	r4,r5,THREAD
+	sub	r4,r4,r6
+	stw	r4,last_task_used_altivec@l(r3)
+#endif /* CONFIG_SMP */
+	/* restore registers and return */
+	/* we haven't used ctr or xer or lr */
+	b	fast_exception_return
+
+/*
+ * AltiVec unavailable trap from kernel - print a message, but let
+ * the task use AltiVec in the kernel until it returns to user mode.
+ */
+KernelAltiVec:
+	lwz	r3,_MSR(r1)
+	oris	r3,r3,MSR_VEC@h
+	stw	r3,_MSR(r1)	/* enable use of AltiVec after return */
+	lis	r3,87f@h
+	ori	r3,r3,87f@l
+	mr	r4,r2		/* current */
+	lwz	r5,_NIP(r1)
+	bl	printk
+	b	ret_from_except
+87:	.string	"AltiVec used in kernel  (task=%p, pc=%x)  \n"
+	.align	4,0
+
+/*
+ * giveup_altivec(tsk)
+ * Disable AltiVec for the task given as the argument,
+ * and save the AltiVec registers in its thread_struct.
+ * Enables AltiVec for use in the kernel on return.
+ */
+
+	.globl	giveup_altivec
+giveup_altivec:
+	mfmsr	r5
+	oris	r5,r5,MSR_VEC@h
+	SYNC
+	MTMSRD(r5)			/* enable use of AltiVec now */
+	isync
+	cmpwi	0,r3,0
+	beqlr-				/* if no previous owner, done */
+	addi	r3,r3,THREAD		/* want THREAD of task */
+	lwz	r5,PT_REGS(r3)
+	cmpwi	0,r5,0
+	SAVE_32VRS(0, r4, r3)
+	mfvscr	vr0
+	li	r4,THREAD_VSCR
+	stvx	vr0,r4,r3
+	beq	1f
+	lwz	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+	lis	r3,MSR_VEC@h
+	andc	r4,r4,r3		/* disable AltiVec for previous task */
+	stw	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#ifndef CONFIG_SMP
+	li	r5,0
+	lis	r4,last_task_used_altivec@ha
+	stw	r5,last_task_used_altivec@l(r4)
+#endif /* CONFIG_SMP */
+	blr
+#endif /* CONFIG_ALTIVEC */
+
+/*
+ * This code is jumped to from the startup code to copy
+ * the kernel image to physical address 0.
+ */
+relocate_kernel:
+	addis	r9,r26,klimit@ha	/* fetch klimit */
+	lwz	r25,klimit@l(r9)
+	addis	r25,r25,-KERNELBASE@h
+	li	r3,0			/* Destination base address */
+	li	r6,0			/* Destination offset */
+	li	r5,0x4000		/* # bytes of memory to copy */
+	bl	copy_and_flush		/* copy the first 0x4000 bytes */
+	addi	r0,r3,4f@l		/* jump to the address of 4f */
+	mtctr	r0			/* in copy and do the rest. */
+	bctr				/* jump to the copy */
+4:	mr	r5,r25
+	bl	copy_and_flush		/* copy the rest */
+	b	turn_on_mmu
+
+/*
+ * Copy routine used to copy the kernel to start at physical address 0
+ * and flush and invalidate the caches as needed.
+ * r3 = dest addr, r4 = source addr, r5 = copy limit, r6 = start offset
+ * on exit, r3, r4, r5 are unchanged, r6 is updated to be >= r5.
+ */
+_GLOBAL(copy_and_flush)
+	addi	r5,r5,-4
+	addi	r6,r6,-4
+4:	li	r0,L1_CACHE_BYTES/4
+	mtctr	r0
+3:	addi	r6,r6,4			/* copy a cache line */
+	lwzx	r0,r6,r4
+	stwx	r0,r6,r3
+	bdnz	3b
+	dcbst	r6,r3			/* write it to memory */
+	sync
+	icbi	r6,r3			/* flush the icache line */
+	cmplw	0,r6,r5
+	blt	4b
+	sync				/* additional sync needed on g4 */
+	isync
+	addi	r5,r5,4
+	addi	r6,r6,4
+	blr
+
+#ifdef CONFIG_APUS
+/*
+ * On APUS the physical base address of the kernel is not known at compile
+ * time, which means the __pa/__va constants used are incorrect. In the
+ * __init section is recorded the virtual addresses of instructions using
+ * these constants, so all that has to be done is fix these before
+ * continuing the kernel boot.
+ *
+ * r4 = The physical address of the kernel base.
+ */
+fix_mem_constants:
+	mr	r10,r4
+	addis	r10,r10,-KERNELBASE@h    /* virt_to_phys constant */
+	neg	r11,r10	                 /* phys_to_virt constant */
+
+	lis	r12,__vtop_table_begin@h
+	ori	r12,r12,__vtop_table_begin@l
+	add	r12,r12,r10	         /* table begin phys address */
+	lis	r13,__vtop_table_end@h
+	ori	r13,r13,__vtop_table_end@l
+	add	r13,r13,r10	         /* table end phys address */
+	subi	r12,r12,4
+	subi	r13,r13,4
+1:	lwzu	r14,4(r12)               /* virt address of instruction */
+	add     r14,r14,r10              /* phys address of instruction */
+	lwz     r15,0(r14)               /* instruction, now insert top */
+	rlwimi  r15,r10,16,16,31         /* half of vp const in low half */
+	stw	r15,0(r14)               /* of instruction and restore. */
+	dcbst	r0,r14			 /* write it to memory */
+	sync
+	icbi	r0,r14			 /* flush the icache line */
+	cmpw	r12,r13
+	bne     1b
+	sync				/* additional sync needed on g4 */
+	isync
+
+/*
+ * Map the memory where the exception handlers will
+ * be copied to when hash constants have been patched.
+ */
+#ifdef CONFIG_APUS_FAST_EXCEPT
+	lis	r8,0xfff0
+#else
+	lis	r8,0
+#endif
+	ori	r8,r8,0x2		/* 128KB, supervisor */
+	mtspr	SPRN_DBAT3U,r8
+	mtspr	SPRN_DBAT3L,r8
+
+	lis	r12,__ptov_table_begin@h
+	ori	r12,r12,__ptov_table_begin@l
+	add	r12,r12,r10	         /* table begin phys address */
+	lis	r13,__ptov_table_end@h
+	ori	r13,r13,__ptov_table_end@l
+	add	r13,r13,r10	         /* table end phys address */
+	subi	r12,r12,4
+	subi	r13,r13,4
+1:	lwzu	r14,4(r12)               /* virt address of instruction */
+	add     r14,r14,r10              /* phys address of instruction */
+	lwz     r15,0(r14)               /* instruction, now insert top */
+	rlwimi  r15,r11,16,16,31         /* half of pv const in low half*/
+	stw	r15,0(r14)               /* of instruction and restore. */
+	dcbst	r0,r14			 /* write it to memory */
+	sync
+	icbi	r0,r14			 /* flush the icache line */
+	cmpw	r12,r13
+	bne     1b
+
+	sync				/* additional sync needed on g4 */
+	isync				/* No speculative loading until now */
+	blr
+
+/***********************************************************************
+ *  Please note that on APUS the exception handlers are located at the
+ *  physical address 0xfff0000. For this reason, the exception handlers
+ *  cannot use relative branches to access the code below.
+ ***********************************************************************/
+#endif /* CONFIG_APUS */
+
+#ifdef CONFIG_SMP
+#ifdef CONFIG_GEMINI
+	.globl	__secondary_start_gemini
+__secondary_start_gemini:
+        mfspr   r4,SPRN_HID0
+        ori     r4,r4,HID0_ICFI
+        li      r3,0
+        ori     r3,r3,HID0_ICE
+        andc    r4,r4,r3
+        mtspr   SPRN_HID0,r4
+        sync
+        b       __secondary_start
+#endif /* CONFIG_GEMINI */
+
+	.globl	__secondary_start_pmac_0
+__secondary_start_pmac_0:
+	/* NB the entries for cpus 0, 1, 2 must each occupy 8 bytes. */
+	li	r24,0
+	b	1f
+	li	r24,1
+	b	1f
+	li	r24,2
+	b	1f
+	li	r24,3
+1:
+	/* on powersurge, we come in here with IR=0 and DR=1, and DBAT 0
+	   set to map the 0xf0000000 - 0xffffffff region */
+	mfmsr	r0
+	rlwinm	r0,r0,0,28,26		/* clear DR (0x10) */
+	SYNC
+	mtmsr	r0
+	isync
+
+	.globl	__secondary_start
+__secondary_start:
+	/* Copy some CPU settings from CPU 0 */
+	bl	__restore_cpu_setup
+
+	lis	r3,-KERNELBASE@h
+	mr	r4,r24
+	bl	call_setup_cpu		/* Call setup_cpu for this CPU */
+#ifdef CONFIG_6xx
+	lis	r3,-KERNELBASE@h
+	bl	init_idle_6xx
+#endif /* CONFIG_6xx */
+
+	/* get current_thread_info and current */
+	lis	r1,secondary_ti@ha
+	tophys(r1,r1)
+	lwz	r1,secondary_ti@l(r1)
+	tophys(r2,r1)
+	lwz	r2,TI_TASK(r2)
+
+	/* stack */
+	addi	r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
+	li	r0,0
+	tophys(r3,r1)
+	stw	r0,0(r3)
+
+	/* load up the MMU */
+	bl	load_up_mmu
+
+	/* ptr to phys current thread */
+	tophys(r4,r2)
+	addi	r4,r4,THREAD	/* phys address of our thread_struct */
+	CLR_TOP32(r4)
+	mtspr	SPRN_SPRG3,r4
+	li	r3,0
+	mtspr	SPRN_SPRG2,r3	/* 0 => not in RTAS */
+
+	/* enable MMU and jump to start_secondary */
+	li	r4,MSR_KERNEL
+	FIX_SRR1(r4,r5)
+	lis	r3,start_secondary@h
+	ori	r3,r3,start_secondary@l
+	mtspr	SPRN_SRR0,r3
+	mtspr	SPRN_SRR1,r4
+	SYNC
+	RFI
+#endif /* CONFIG_SMP */
+
+/*
+ * Those generic dummy functions are kept for CPUs not
+ * included in CONFIG_6xx
+ */
+#if !defined(CONFIG_6xx)
+_GLOBAL(__save_cpu_setup)
+	blr
+_GLOBAL(__restore_cpu_setup)
+	blr
+#endif /* !defined(CONFIG_6xx) */
+
+
+/*
+ * Load stuff into the MMU.  Intended to be called with
+ * IR=0 and DR=0.
+ */
+load_up_mmu:
+	sync			/* Force all PTE updates to finish */
+	isync
+	tlbia			/* Clear all TLB entries */
+	sync			/* wait for tlbia/tlbie to finish */
+	TLBSYNC			/* ... on all CPUs */
+	/* Load the SDR1 register (hash table base & size) */
+	lis	r6,_SDR1@ha
+	tophys(r6,r6)
+	lwz	r6,_SDR1@l(r6)
+	mtspr	SPRN_SDR1,r6
+	li	r0,16		/* load up segment register values */
+	mtctr	r0		/* for context 0 */
+	lis	r3,0x2000	/* Ku = 1, VSID = 0 */
+	li	r4,0
+3:	mtsrin	r3,r4
+	addi	r3,r3,0x111	/* increment VSID */
+	addis	r4,r4,0x1000	/* address of next segment */
+	bdnz	3b
+
+/* Load the BAT registers with the values set up by MMU_init.
+   MMU_init takes care of whether we're on a 601 or not. */
+	mfpvr	r3
+	srwi	r3,r3,16
+	cmpwi	r3,1
+	lis	r3,BATS@ha
+	addi	r3,r3,BATS@l
+	tophys(r3,r3)
+	LOAD_BAT(0,r3,r4,r5)
+	LOAD_BAT(1,r3,r4,r5)
+	LOAD_BAT(2,r3,r4,r5)
+	LOAD_BAT(3,r3,r4,r5)
+
+	blr
+
+/*
+ * This is where the main kernel code starts.
+ */
+start_here:
+	/* ptr to current */
+	lis	r2,init_task@h
+	ori	r2,r2,init_task@l
+	/* Set up for using our exception vectors */
+	/* ptr to phys current thread */
+	tophys(r4,r2)
+	addi	r4,r4,THREAD	/* init task's THREAD */
+	CLR_TOP32(r4)
+	mtspr	SPRN_SPRG3,r4
+	li	r3,0
+	mtspr	SPRN_SPRG2,r3	/* 0 => not in RTAS */
+
+	/* stack */
+	lis	r1,init_thread_union@ha
+	addi	r1,r1,init_thread_union@l
+	li	r0,0
+	stwu	r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
+/*
+ * Do early platform-specific initialization,
+ * and set up the MMU.
+ */
+	mr	r3,r31
+	mr	r4,r30
+	bl	machine_init
+	bl	__save_cpu_setup
+	bl	MMU_init
+
+#ifdef CONFIG_APUS
+	/* Copy exception code to exception vector base on APUS. */
+	lis	r4,KERNELBASE@h
+#ifdef CONFIG_APUS_FAST_EXCEPT
+	lis	r3,0xfff0		/* Copy to 0xfff00000 */
+#else
+	lis	r3,0			/* Copy to 0x00000000 */
+#endif
+	li	r5,0x4000		/* # bytes of memory to copy */
+	li	r6,0
+	bl	copy_and_flush		/* copy the first 0x4000 bytes */
+#endif  /* CONFIG_APUS */
+
+/*
+ * Go back to running unmapped so we can load up new values
+ * for SDR1 (hash table pointer) and the segment registers
+ * and change to using our exception vectors.
+ */
+	lis	r4,2f@h
+	ori	r4,r4,2f@l
+	tophys(r4,r4)
+	li	r3,MSR_KERNEL & ~(MSR_IR|MSR_DR)
+	FIX_SRR1(r3,r5)
+	mtspr	SPRN_SRR0,r4
+	mtspr	SPRN_SRR1,r3
+	SYNC
+	RFI
+/* Load up the kernel context */
+2:	bl	load_up_mmu
+
+#ifdef CONFIG_BDI_SWITCH
+	/* Add helper information for the Abatron bdiGDB debugger.
+	 * We do this here because we know the mmu is disabled, and
+	 * will be enabled for real in just a few instructions.
+	 */
+	lis	r5, abatron_pteptrs@h
+	ori	r5, r5, abatron_pteptrs@l
+	stw	r5, 0xf0(r0)	/* This much match your Abatron config */
+	lis	r6, swapper_pg_dir@h
+	ori	r6, r6, swapper_pg_dir@l
+	tophys(r5, r5)
+	stw	r6, 0(r5)
+#endif /* CONFIG_BDI_SWITCH */
+
+/* Now turn on the MMU for real! */
+	li	r4,MSR_KERNEL
+	FIX_SRR1(r4,r5)
+	lis	r3,start_kernel@h
+	ori	r3,r3,start_kernel@l
+	mtspr	SPRN_SRR0,r3
+	mtspr	SPRN_SRR1,r4
+	SYNC
+	RFI
+
+/*
+ * Set up the segment registers for a new context.
+ */
+_GLOBAL(set_context)
+	mulli	r3,r3,897	/* multiply context by skew factor */
+	rlwinm	r3,r3,4,8,27	/* VSID = (context & 0xfffff) << 4 */
+	addis	r3,r3,0x6000	/* Set Ks, Ku bits */
+	li	r0,NUM_USER_SEGMENTS
+	mtctr	r0
+
+#ifdef CONFIG_BDI_SWITCH
+	/* Context switch the PTE pointer for the Abatron BDI2000.
+	 * The PGDIR is passed as second argument.
+	 */
+	lis	r5, KERNELBASE@h
+	lwz	r5, 0xf0(r5)
+	stw	r4, 0x4(r5)
+#endif
+	li	r4,0
+	isync
+3:
+	mtsrin	r3,r4
+	addi	r3,r3,0x111	/* next VSID */
+	rlwinm	r3,r3,0,8,3	/* clear out any overflow from VSID field */
+	addis	r4,r4,0x1000	/* address of next segment */
+	bdnz	3b
+	sync
+	isync
+	blr
+
+/*
+ * An undocumented "feature" of 604e requires that the v bit
+ * be cleared before changing BAT values.
+ *
+ * Also, newer IBM firmware does not clear bat3 and 4 so
+ * this makes sure it's done.
+ *  -- Cort
+ */
+clear_bats:
+	li	r10,0
+	mfspr	r9,SPRN_PVR
+	rlwinm	r9,r9,16,16,31		/* r9 = 1 for 601, 4 for 604 */
+	cmpwi	r9, 1
+	beq	1f
+
+	mtspr	SPRN_DBAT0U,r10
+	mtspr	SPRN_DBAT0L,r10
+	mtspr	SPRN_DBAT1U,r10
+	mtspr	SPRN_DBAT1L,r10
+	mtspr	SPRN_DBAT2U,r10
+	mtspr	SPRN_DBAT2L,r10
+	mtspr	SPRN_DBAT3U,r10
+	mtspr	SPRN_DBAT3L,r10
+1:
+	mtspr	SPRN_IBAT0U,r10
+	mtspr	SPRN_IBAT0L,r10
+	mtspr	SPRN_IBAT1U,r10
+	mtspr	SPRN_IBAT1L,r10
+	mtspr	SPRN_IBAT2U,r10
+	mtspr	SPRN_IBAT2L,r10
+	mtspr	SPRN_IBAT3U,r10
+	mtspr	SPRN_IBAT3L,r10
+BEGIN_FTR_SECTION
+	/* Here's a tweak: at this point, CPU setup have
+	 * not been called yet, so HIGH_BAT_EN may not be
+	 * set in HID0 for the 745x processors. However, it
+	 * seems that doesn't affect our ability to actually
+	 * write to these SPRs.
+	 */
+	mtspr	SPRN_DBAT4U,r10
+	mtspr	SPRN_DBAT4L,r10
+	mtspr	SPRN_DBAT5U,r10
+	mtspr	SPRN_DBAT5L,r10
+	mtspr	SPRN_DBAT6U,r10
+	mtspr	SPRN_DBAT6L,r10
+	mtspr	SPRN_DBAT7U,r10
+	mtspr	SPRN_DBAT7L,r10
+	mtspr	SPRN_IBAT4U,r10
+	mtspr	SPRN_IBAT4L,r10
+	mtspr	SPRN_IBAT5U,r10
+	mtspr	SPRN_IBAT5L,r10
+	mtspr	SPRN_IBAT6U,r10
+	mtspr	SPRN_IBAT6L,r10
+	mtspr	SPRN_IBAT7U,r10
+	mtspr	SPRN_IBAT7L,r10
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_HIGH_BATS)
+	blr
+
+flush_tlbs:
+	lis	r10, 0x40
+1:	addic.	r10, r10, -0x1000
+	tlbie	r10
+	blt	1b
+	sync
+	blr
+
+mmu_off:
+ 	addi	r4, r3, __after_mmu_off - _start
+	mfmsr	r3
+	andi.	r0,r3,MSR_DR|MSR_IR		/* MMU enabled? */
+	beqlr
+	andc	r3,r3,r0
+	mtspr	SPRN_SRR0,r4
+	mtspr	SPRN_SRR1,r3
+	sync
+	RFI
+
+/*
+ * Use the first pair of BAT registers to map the 1st 16MB
+ * of RAM to KERNELBASE.  From this point on we can't safely
+ * call OF any more.
+ */
+initial_bats:
+	lis	r11,KERNELBASE@h
+	mfspr	r9,SPRN_PVR
+	rlwinm	r9,r9,16,16,31		/* r9 = 1 for 601, 4 for 604 */
+	cmpwi	0,r9,1
+	bne	4f
+	ori	r11,r11,4		/* set up BAT registers for 601 */
+	li	r8,0x7f			/* valid, block length = 8MB */
+	oris	r9,r11,0x800000@h	/* set up BAT reg for 2nd 8M */
+	oris	r10,r8,0x800000@h	/* set up BAT reg for 2nd 8M */
+	mtspr	SPRN_IBAT0U,r11		/* N.B. 601 has valid bit in */
+	mtspr	SPRN_IBAT0L,r8		/* lower BAT register */
+	mtspr	SPRN_IBAT1U,r9
+	mtspr	SPRN_IBAT1L,r10
+	isync
+	blr
+
+4:	tophys(r8,r11)
+#ifdef CONFIG_SMP
+	ori	r8,r8,0x12		/* R/W access, M=1 */
+#else
+	ori	r8,r8,2			/* R/W access */
+#endif /* CONFIG_SMP */
+#ifdef CONFIG_APUS
+	ori	r11,r11,BL_8M<<2|0x2	/* set up 8MB BAT registers for 604 */
+#else
+	ori	r11,r11,BL_256M<<2|0x2	/* set up BAT registers for 604 */
+#endif /* CONFIG_APUS */
+
+	mtspr	SPRN_DBAT0L,r8		/* N.B. 6xx (not 601) have valid */
+	mtspr	SPRN_DBAT0U,r11		/* bit in upper BAT register */
+	mtspr	SPRN_IBAT0L,r8
+	mtspr	SPRN_IBAT0U,r11
+	isync
+	blr
+
+
+#ifdef CONFIG_8260
+/* Jump into the system reset for the rom.
+ * We first disable the MMU, and then jump to the ROM reset address.
+ *
+ * r3 is the board info structure, r4 is the location for starting.
+ * I use this for building a small kernel that can load other kernels,
+ * rather than trying to write or rely on a rom monitor that can tftp load.
+ */
+       .globl  m8260_gorom
+m8260_gorom:
+	mfmsr	r0
+	rlwinm	r0,r0,0,17,15	/* clear MSR_EE in r0 */
+	sync
+	mtmsr	r0
+	sync
+	mfspr	r11, SPRN_HID0
+	lis	r10, 0
+	ori	r10,r10,HID0_ICE|HID0_DCE
+	andc	r11, r11, r10
+	mtspr	SPRN_HID0, r11
+	isync
+	li	r5, MSR_ME|MSR_RI
+	lis	r6,2f@h
+	addis	r6,r6,-KERNELBASE@h
+	ori	r6,r6,2f@l
+	mtspr	SPRN_SRR0,r6
+	mtspr	SPRN_SRR1,r5
+	isync
+	sync
+	rfi
+2:
+	mtlr	r4
+	blr
+#endif
+
+
+/*
+ * We put a few things here that have to be page-aligned.
+ * This stuff goes at the beginning of the data segment,
+ * which is page-aligned.
+ */
+	.data
+	.globl	sdata
+sdata:
+	.globl	empty_zero_page
+empty_zero_page:
+	.space	4096
+
+	.globl	swapper_pg_dir
+swapper_pg_dir:
+	.space	4096
+
+/*
+ * This space gets a copy of optional info passed to us by the bootstrap
+ * Used to pass parameters into the kernel like root=/dev/sda1, etc.
+ */
+	.globl	cmd_line
+cmd_line:
+	.space	512
+
+	.globl intercept_table
+intercept_table:
+	.long 0, 0, i0x200, i0x300, i0x400, 0, i0x600, i0x700
+	.long i0x800, 0, 0, 0, 0, i0xd00, 0, 0
+	.long 0, 0, 0, i0x1300, 0, 0, 0, 0
+	.long 0, 0, 0, 0, 0, 0, 0, 0
+	.long 0, 0, 0, 0, 0, 0, 0, 0
+	.long 0, 0, 0, 0, 0, 0, 0, 0
+
+/* Room for two PTE pointers, usually the kernel and current user pointers
+ * to their respective root page table.
+ */
+abatron_pteptrs:
+	.space	8
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
new file mode 100644
index 000000000000..8b49679fad54
--- /dev/null
+++ b/arch/powerpc/kernel/head_44x.S
@@ -0,0 +1,782 @@
+/*
+ * arch/ppc/kernel/head_44x.S
+ *
+ * Kernel execution entry point code.
+ *
+ *    Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
+ *      Initial PowerPC version.
+ *    Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu>
+ *      Rewritten for PReP
+ *    Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
+ *      Low-level exception handers, MMU support, and rewrite.
+ *    Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
+ *      PowerPC 8xx modifications.
+ *    Copyright (c) 1998-1999 TiVo, Inc.
+ *      PowerPC 403GCX modifications.
+ *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ *      PowerPC 403GCX/405GP modifications.
+ *    Copyright 2000 MontaVista Software Inc.
+ *	PPC405 modifications
+ *      PowerPC 403GCX/405GP modifications.
+ * 	Author: MontaVista Software, Inc.
+ *         	frank_rowand@mvista.com or source@mvista.com
+ * 	   	debbie_chu@mvista.com
+ *    Copyright 2002-2005 MontaVista Software, Inc.
+ *      PowerPC 44x support, Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/pgtable.h>
+#include <asm/ibm4xx.h>
+#include <asm/ibm44x.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include "head_booke.h"
+
+
+/* As with the other PowerPC ports, it is expected that when code
+ * execution begins here, the following registers contain valid, yet
+ * optional, information:
+ *
+ *   r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.)
+ *   r4 - Starting address of the init RAM disk
+ *   r5 - Ending address of the init RAM disk
+ *   r6 - Start of kernel command line string (e.g. "mem=128")
+ *   r7 - End of kernel command line string
+ *
+ */
+	.text
+_GLOBAL(_stext)
+_GLOBAL(_start)
+	/*
+	 * Reserve a word at a fixed location to store the address
+	 * of abatron_pteptrs
+	 */
+	nop
+/*
+ * Save parameters we are passed
+ */
+	mr	r31,r3
+	mr	r30,r4
+	mr	r29,r5
+	mr	r28,r6
+	mr	r27,r7
+	li	r24,0		/* CPU number */
+
+/*
+ * Set up the initial MMU state
+ *
+ * We are still executing code at the virtual address
+ * mappings set by the firmware for the base of RAM.
+ *
+ * We first invalidate all TLB entries but the one
+ * we are running from.  We then load the KERNELBASE
+ * mappings so we can begin to use kernel addresses
+ * natively and so the interrupt vector locations are
+ * permanently pinned (necessary since Book E
+ * implementations always have translation enabled).
+ *
+ * TODO: Use the known TLB entry we are running from to
+ *	 determine which physical region we are located
+ *	 in.  This can be used to determine where in RAM
+ *	 (on a shared CPU system) or PCI memory space
+ *	 (on a DRAMless system) we are located.
+ *       For now, we assume a perfect world which means
+ *	 we are located at the base of DRAM (physical 0).
+ */
+
+/*
+ * Search TLB for entry that we are currently using.
+ * Invalidate all entries but the one we are using.
+ */
+	/* Load our current PID->MMUCR TID and MSR IS->MMUCR STS */
+	mfspr	r3,SPRN_PID			/* Get PID */
+	mfmsr	r4				/* Get MSR */
+	andi.	r4,r4,MSR_IS@l			/* TS=1? */
+	beq	wmmucr				/* If not, leave STS=0 */
+	oris	r3,r3,PPC44x_MMUCR_STS@h	/* Set STS=1 */
+wmmucr:	mtspr	SPRN_MMUCR,r3			/* Put MMUCR */
+	sync
+
+	bl	invstr				/* Find our address */
+invstr:	mflr	r5				/* Make it accessible */
+	tlbsx	r23,0,r5			/* Find entry we are in */
+	li	r4,0				/* Start at TLB entry 0 */
+	li	r3,0				/* Set PAGEID inval value */
+1:	cmpw	r23,r4				/* Is this our entry? */
+	beq	skpinv				/* If so, skip the inval */
+	tlbwe	r3,r4,PPC44x_TLB_PAGEID		/* If not, inval the entry */
+skpinv:	addi	r4,r4,1				/* Increment */
+	cmpwi	r4,64				/* Are we done? */
+	bne	1b				/* If not, repeat */
+	isync					/* If so, context change */
+
+/*
+ * Configure and load pinned entry into TLB slot 63.
+ */
+
+	lis	r3,KERNELBASE@h		/* Load the kernel virtual address */
+	ori	r3,r3,KERNELBASE@l
+
+	/* Kernel is at the base of RAM */
+	li r4, 0			/* Load the kernel physical address */
+
+	/* Load the kernel PID = 0 */
+	li	r0,0
+	mtspr	SPRN_PID,r0
+	sync
+
+	/* Initialize MMUCR */
+	li	r5,0
+	mtspr	SPRN_MMUCR,r5
+	sync
+
+ 	/* pageid fields */
+	clrrwi	r3,r3,10		/* Mask off the effective page number */
+	ori	r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_256M
+
+	/* xlat fields */
+	clrrwi	r4,r4,10		/* Mask off the real page number */
+					/* ERPN is 0 for first 4GB page */
+
+	/* attrib fields */
+	/* Added guarded bit to protect against speculative loads/stores */
+	li	r5,0
+	ori	r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G)
+
+        li      r0,63                    /* TLB slot 63 */
+
+	tlbwe	r3,r0,PPC44x_TLB_PAGEID	/* Load the pageid fields */
+	tlbwe	r4,r0,PPC44x_TLB_XLAT	/* Load the translation fields */
+	tlbwe	r5,r0,PPC44x_TLB_ATTRIB	/* Load the attrib/access fields */
+
+	/* Force context change */
+	mfmsr	r0
+	mtspr	SPRN_SRR1, r0
+	lis	r0,3f@h
+	ori	r0,r0,3f@l
+	mtspr	SPRN_SRR0,r0
+	sync
+	rfi
+
+	/* If necessary, invalidate original entry we used */
+3:	cmpwi	r23,63
+	beq	4f
+	li	r6,0
+	tlbwe   r6,r23,PPC44x_TLB_PAGEID
+	isync
+
+4:
+#ifdef CONFIG_SERIAL_TEXT_DEBUG
+	/*
+	 * Add temporary UART mapping for early debug.
+	 * We can map UART registers wherever we want as long as they don't
+	 * interfere with other system mappings (e.g. with pinned entries).
+	 * For an example of how we handle this - see ocotea.h.       --ebs
+	 */
+ 	/* pageid fields */
+	lis	r3,UART0_IO_BASE@h
+	ori	r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_4K
+
+	/* xlat fields */
+	lis	r4,UART0_PHYS_IO_BASE@h		/* RPN depends on SoC */
+#ifndef CONFIG_440EP
+	ori	r4,r4,0x0001		/* ERPN is 1 for second 4GB page */
+#endif
+
+	/* attrib fields */
+	li	r5,0
+	ori	r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_I | PPC44x_TLB_G)
+
+        li      r0,0                    /* TLB slot 0 */
+
+	tlbwe	r3,r0,PPC44x_TLB_PAGEID	/* Load the pageid fields */
+	tlbwe	r4,r0,PPC44x_TLB_XLAT	/* Load the translation fields */
+	tlbwe	r5,r0,PPC44x_TLB_ATTRIB	/* Load the attrib/access fields */
+
+	/* Force context change */
+	isync
+#endif /* CONFIG_SERIAL_TEXT_DEBUG */
+
+	/* Establish the interrupt vector offsets */
+	SET_IVOR(0,  CriticalInput);
+	SET_IVOR(1,  MachineCheck);
+	SET_IVOR(2,  DataStorage);
+	SET_IVOR(3,  InstructionStorage);
+	SET_IVOR(4,  ExternalInput);
+	SET_IVOR(5,  Alignment);
+	SET_IVOR(6,  Program);
+	SET_IVOR(7,  FloatingPointUnavailable);
+	SET_IVOR(8,  SystemCall);
+	SET_IVOR(9,  AuxillaryProcessorUnavailable);
+	SET_IVOR(10, Decrementer);
+	SET_IVOR(11, FixedIntervalTimer);
+	SET_IVOR(12, WatchdogTimer);
+	SET_IVOR(13, DataTLBError);
+	SET_IVOR(14, InstructionTLBError);
+	SET_IVOR(15, Debug);
+
+	/* Establish the interrupt vector base */
+	lis	r4,interrupt_base@h	/* IVPR only uses the high 16-bits */
+	mtspr	SPRN_IVPR,r4
+
+#ifdef CONFIG_440EP
+	/* Clear DAPUIB flag in CCR0 (enable APU between CPU and FPU) */
+	mfspr	r2,SPRN_CCR0
+	lis	r3,0xffef
+	ori	r3,r3,0xffff
+	and	r2,r2,r3
+	mtspr	SPRN_CCR0,r2
+	isync
+#endif
+
+	/*
+	 * This is where the main kernel code starts.
+	 */
+
+	/* ptr to current */
+	lis	r2,init_task@h
+	ori	r2,r2,init_task@l
+
+	/* ptr to current thread */
+	addi	r4,r2,THREAD	/* init task's THREAD */
+	mtspr	SPRN_SPRG3,r4
+
+	/* stack */
+	lis	r1,init_thread_union@h
+	ori	r1,r1,init_thread_union@l
+	li	r0,0
+	stwu	r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
+
+	bl	early_init
+
+/*
+ * Decide what sort of machine this is and initialize the MMU.
+ */
+	mr	r3,r31
+	mr	r4,r30
+	mr	r5,r29
+	mr	r6,r28
+	mr	r7,r27
+	bl	machine_init
+	bl	MMU_init
+
+	/* Setup PTE pointers for the Abatron bdiGDB */
+	lis	r6, swapper_pg_dir@h
+	ori	r6, r6, swapper_pg_dir@l
+	lis	r5, abatron_pteptrs@h
+	ori	r5, r5, abatron_pteptrs@l
+	lis	r4, KERNELBASE@h
+	ori	r4, r4, KERNELBASE@l
+	stw	r5, 0(r4)	/* Save abatron_pteptrs at a fixed location */
+	stw	r6, 0(r5)
+
+	/* Let's move on */
+	lis	r4,start_kernel@h
+	ori	r4,r4,start_kernel@l
+	lis	r3,MSR_KERNEL@h
+	ori	r3,r3,MSR_KERNEL@l
+	mtspr	SPRN_SRR0,r4
+	mtspr	SPRN_SRR1,r3
+	rfi			/* change context and jump to start_kernel */
+
+/*
+ * Interrupt vector entry code
+ *
+ * The Book E MMUs are always on so we don't need to handle
+ * interrupts in real mode as with previous PPC processors. In
+ * this case we handle interrupts in the kernel virtual address
+ * space.
+ *
+ * Interrupt vectors are dynamically placed relative to the
+ * interrupt prefix as determined by the address of interrupt_base.
+ * The interrupt vectors offsets are programmed using the labels
+ * for each interrupt vector entry.
+ *
+ * Interrupt vectors must be aligned on a 16 byte boundary.
+ * We align on a 32 byte cache line boundary for good measure.
+ */
+
+interrupt_base:
+	/* Critical Input Interrupt */
+	CRITICAL_EXCEPTION(0x0100, CriticalInput, unknown_exception)
+
+	/* Machine Check Interrupt */
+#ifdef CONFIG_440A
+	MCHECK_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
+#else
+	CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
+#endif
+
+	/* Data Storage Interrupt */
+	START_EXCEPTION(DataStorage)
+	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
+	mtspr	SPRN_SPRG1, r11
+	mtspr	SPRN_SPRG4W, r12
+	mtspr	SPRN_SPRG5W, r13
+	mfcr	r11
+	mtspr	SPRN_SPRG7W, r11
+
+	/*
+	 * Check if it was a store fault, if not then bail
+	 * because a user tried to access a kernel or
+	 * read-protected page.  Otherwise, get the
+	 * offending address and handle it.
+	 */
+	mfspr	r10, SPRN_ESR
+	andis.	r10, r10, ESR_ST@h
+	beq	2f
+
+	mfspr	r10, SPRN_DEAR		/* Get faulting address */
+
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	lis	r11, TASK_SIZE@h
+	cmplw	r10, r11
+	blt+	3f
+	lis	r11, swapper_pg_dir@h
+	ori	r11, r11, swapper_pg_dir@l
+
+	mfspr   r12,SPRN_MMUCR
+	rlwinm	r12,r12,0,0,23		/* Clear TID */
+
+	b	4f
+
+	/* Get the PGD for the current thread */
+3:
+	mfspr	r11,SPRN_SPRG3
+	lwz	r11,PGDIR(r11)
+
+	/* Load PID into MMUCR TID */
+	mfspr	r12,SPRN_MMUCR		/* Get MMUCR */
+	mfspr   r13,SPRN_PID		/* Get PID */
+	rlwimi	r12,r13,0,24,31		/* Set TID */
+
+4:
+	mtspr   SPRN_MMUCR,r12
+
+	rlwinm  r12, r10, 13, 19, 29    /* Compute pgdir/pmd offset */
+	lwzx    r11, r12, r11           /* Get pgd/pmd entry */
+	rlwinm. r12, r11, 0, 0, 20      /* Extract pt base address */
+	beq     2f                      /* Bail if no table */
+
+	rlwimi  r12, r10, 23, 20, 28    /* Compute pte address */
+	lwz     r11, 4(r12)             /* Get pte entry */
+
+	andi.	r13, r11, _PAGE_RW	/* Is it writeable? */
+	beq	2f			/* Bail if not */
+
+	/* Update 'changed'.
+	*/
+	ori	r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
+	stw	r11, 4(r12)		/* Update Linux page table */
+
+	li	r13, PPC44x_TLB_SR@l	/* Set SR */
+	rlwimi	r13, r11, 29, 29, 29	/* SX = _PAGE_HWEXEC */
+	rlwimi	r13, r11, 0, 30, 30	/* SW = _PAGE_RW */
+	rlwimi	r13, r11, 29, 28, 28	/* UR = _PAGE_USER */
+	rlwimi	r12, r11, 31, 26, 26	/* (_PAGE_USER>>1)->r12 */
+	rlwimi	r12, r11, 29, 30, 30	/* (_PAGE_USER>>3)->r12 */
+	and	r12, r12, r11		/* HWEXEC/RW & USER */
+	rlwimi	r13, r12, 0, 26, 26	/* UX = HWEXEC & USER */
+	rlwimi	r13, r12, 3, 27, 27	/* UW = RW & USER */
+
+	rlwimi	r11,r13,0,26,31		/* Insert static perms */
+
+	rlwinm	r11,r11,0,20,15		/* Clear U0-U3 */
+
+	/* find the TLB index that caused the fault.  It has to be here. */
+	tlbsx	r10, 0, r10
+
+	tlbwe	r11, r10, PPC44x_TLB_ATTRIB	/* Write ATTRIB */
+
+	/* Done...restore registers and get out of here.
+	*/
+	mfspr	r11, SPRN_SPRG7R
+	mtcr	r11
+	mfspr	r13, SPRN_SPRG5R
+	mfspr	r12, SPRN_SPRG4R
+
+	mfspr	r11, SPRN_SPRG1
+	mfspr	r10, SPRN_SPRG0
+	rfi			/* Force context change */
+
+2:
+	/*
+	 * The bailout.  Restore registers to pre-exception conditions
+	 * and call the heavyweights to help us out.
+	 */
+	mfspr	r11, SPRN_SPRG7R
+	mtcr	r11
+	mfspr	r13, SPRN_SPRG5R
+	mfspr	r12, SPRN_SPRG4R
+
+	mfspr	r11, SPRN_SPRG1
+	mfspr	r10, SPRN_SPRG0
+	b	data_access
+
+	/* Instruction Storage Interrupt */
+	INSTRUCTION_STORAGE_EXCEPTION
+
+	/* External Input Interrupt */
+	EXCEPTION(0x0500, ExternalInput, do_IRQ, EXC_XFER_LITE)
+
+	/* Alignment Interrupt */
+	ALIGNMENT_EXCEPTION
+
+	/* Program Interrupt */
+	PROGRAM_EXCEPTION
+
+	/* Floating Point Unavailable Interrupt */
+#ifdef CONFIG_PPC_FPU
+	FP_UNAVAILABLE_EXCEPTION
+#else
+	EXCEPTION(0x2010, FloatingPointUnavailable, unknown_exception, EXC_XFER_EE)
+#endif
+
+	/* System Call Interrupt */
+	START_EXCEPTION(SystemCall)
+	NORMAL_EXCEPTION_PROLOG
+	EXC_XFER_EE_LITE(0x0c00, DoSyscall)
+
+	/* Auxillary Processor Unavailable Interrupt */
+	EXCEPTION(0x2020, AuxillaryProcessorUnavailable, unknown_exception, EXC_XFER_EE)
+
+	/* Decrementer Interrupt */
+	DECREMENTER_EXCEPTION
+
+	/* Fixed Internal Timer Interrupt */
+	/* TODO: Add FIT support */
+	EXCEPTION(0x1010, FixedIntervalTimer, unknown_exception, EXC_XFER_EE)
+
+	/* Watchdog Timer Interrupt */
+	/* TODO: Add watchdog support */
+#ifdef CONFIG_BOOKE_WDT
+	CRITICAL_EXCEPTION(0x1020, WatchdogTimer, WatchdogException)
+#else
+	CRITICAL_EXCEPTION(0x1020, WatchdogTimer, unknown_exception)
+#endif
+
+	/* Data TLB Error Interrupt */
+	START_EXCEPTION(DataTLBError)
+	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
+	mtspr	SPRN_SPRG1, r11
+	mtspr	SPRN_SPRG4W, r12
+	mtspr	SPRN_SPRG5W, r13
+	mfcr	r11
+	mtspr	SPRN_SPRG7W, r11
+	mfspr	r10, SPRN_DEAR		/* Get faulting address */
+
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	lis	r11, TASK_SIZE@h
+	cmplw	r10, r11
+	blt+	3f
+	lis	r11, swapper_pg_dir@h
+	ori	r11, r11, swapper_pg_dir@l
+
+	mfspr	r12,SPRN_MMUCR
+	rlwinm	r12,r12,0,0,23		/* Clear TID */
+
+	b	4f
+
+	/* Get the PGD for the current thread */
+3:
+	mfspr	r11,SPRN_SPRG3
+	lwz	r11,PGDIR(r11)
+
+	/* Load PID into MMUCR TID */
+	mfspr	r12,SPRN_MMUCR
+	mfspr   r13,SPRN_PID		/* Get PID */
+	rlwimi	r12,r13,0,24,31		/* Set TID */
+
+4:
+	mtspr	SPRN_MMUCR,r12
+
+	rlwinm 	r12, r10, 13, 19, 29	/* Compute pgdir/pmd offset */
+	lwzx	r11, r12, r11		/* Get pgd/pmd entry */
+	rlwinm.	r12, r11, 0, 0, 20	/* Extract pt base address */
+	beq	2f			/* Bail if no table */
+
+	rlwimi	r12, r10, 23, 20, 28	/* Compute pte address */
+	lwz	r11, 4(r12)		/* Get pte entry */
+	andi.	r13, r11, _PAGE_PRESENT	/* Is the page present? */
+	beq	2f			/* Bail if not present */
+
+	ori	r11, r11, _PAGE_ACCESSED
+	stw	r11, 4(r12)
+
+	 /* Jump to common tlb load */
+	b	finish_tlb_load
+
+2:
+	/* The bailout.  Restore registers to pre-exception conditions
+	 * and call the heavyweights to help us out.
+	 */
+	mfspr	r11, SPRN_SPRG7R
+	mtcr	r11
+	mfspr	r13, SPRN_SPRG5R
+	mfspr	r12, SPRN_SPRG4R
+	mfspr	r11, SPRN_SPRG1
+	mfspr	r10, SPRN_SPRG0
+	b	data_access
+
+	/* Instruction TLB Error Interrupt */
+	/*
+	 * Nearly the same as above, except we get our
+	 * information from different registers and bailout
+	 * to a different point.
+	 */
+	START_EXCEPTION(InstructionTLBError)
+	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
+	mtspr	SPRN_SPRG1, r11
+	mtspr	SPRN_SPRG4W, r12
+	mtspr	SPRN_SPRG5W, r13
+	mfcr	r11
+	mtspr	SPRN_SPRG7W, r11
+	mfspr	r10, SPRN_SRR0		/* Get faulting address */
+
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	lis	r11, TASK_SIZE@h
+	cmplw	r10, r11
+	blt+	3f
+	lis	r11, swapper_pg_dir@h
+	ori	r11, r11, swapper_pg_dir@l
+
+	mfspr	r12,SPRN_MMUCR
+	rlwinm	r12,r12,0,0,23		/* Clear TID */
+
+	b	4f
+
+	/* Get the PGD for the current thread */
+3:
+	mfspr	r11,SPRN_SPRG3
+	lwz	r11,PGDIR(r11)
+
+	/* Load PID into MMUCR TID */
+	mfspr	r12,SPRN_MMUCR
+	mfspr   r13,SPRN_PID		/* Get PID */
+	rlwimi	r12,r13,0,24,31		/* Set TID */
+
+4:
+	mtspr	SPRN_MMUCR,r12
+
+	rlwinm	r12, r10, 13, 19, 29	/* Compute pgdir/pmd offset */
+	lwzx	r11, r12, r11		/* Get pgd/pmd entry */
+	rlwinm.	r12, r11, 0, 0, 20	/* Extract pt base address */
+	beq	2f			/* Bail if no table */
+
+	rlwimi	r12, r10, 23, 20, 28	/* Compute pte address */
+	lwz	r11, 4(r12)		/* Get pte entry */
+	andi.	r13, r11, _PAGE_PRESENT	/* Is the page present? */
+	beq	2f			/* Bail if not present */
+
+	ori	r11, r11, _PAGE_ACCESSED
+	stw	r11, 4(r12)
+
+	/* Jump to common TLB load point */
+	b	finish_tlb_load
+
+2:
+	/* The bailout.  Restore registers to pre-exception conditions
+	 * and call the heavyweights to help us out.
+	 */
+	mfspr	r11, SPRN_SPRG7R
+	mtcr	r11
+	mfspr	r13, SPRN_SPRG5R
+	mfspr	r12, SPRN_SPRG4R
+	mfspr	r11, SPRN_SPRG1
+	mfspr	r10, SPRN_SPRG0
+	b	InstructionStorage
+
+	/* Debug Interrupt */
+	DEBUG_EXCEPTION
+
+/*
+ * Local functions
+ */
+	/*
+	 * Data TLB exceptions will bail out to this point
+	 * if they can't resolve the lightweight TLB fault.
+	 */
+data_access:
+	NORMAL_EXCEPTION_PROLOG
+	mfspr	r5,SPRN_ESR		/* Grab the ESR, save it, pass arg3 */
+	stw	r5,_ESR(r11)
+	mfspr	r4,SPRN_DEAR		/* Grab the DEAR, save it, pass arg2 */
+	EXC_XFER_EE_LITE(0x0300, handle_page_fault)
+
+/*
+
+ * Both the instruction and data TLB miss get to this
+ * point to load the TLB.
+ * 	r10 - EA of fault
+ * 	r11 - available to use
+ *	r12 - Pointer to the 64-bit PTE
+ *	r13 - available to use
+ *	MMUCR - loaded with proper value when we get here
+ *	Upon exit, we reload everything and RFI.
+ */
+finish_tlb_load:
+	/*
+	 * We set execute, because we don't have the granularity to
+	 * properly set this at the page level (Linux problem).
+	 * If shared is set, we cause a zero PID->TID load.
+	 * Many of these bits are software only.  Bits we don't set
+	 * here we (properly should) assume have the appropriate value.
+	 */
+
+	/* Load the next available TLB index */
+	lis	r13, tlb_44x_index@ha
+	lwz	r13, tlb_44x_index@l(r13)
+	/* Load the TLB high watermark */
+	lis	r11, tlb_44x_hwater@ha
+	lwz	r11, tlb_44x_hwater@l(r11)
+
+	/* Increment, rollover, and store TLB index */
+	addi	r13, r13, 1
+	cmpw	0, r13, r11			/* reserve entries */
+	ble	7f
+	li	r13, 0
+7:
+	/* Store the next available TLB index */
+	lis	r11, tlb_44x_index@ha
+	stw	r13, tlb_44x_index@l(r11)
+
+	lwz	r11, 0(r12)			/* Get MS word of PTE */
+	lwz	r12, 4(r12)			/* Get LS word of PTE */
+	rlwimi	r11, r12, 0, 0 , 19		/* Insert RPN */
+	tlbwe	r11, r13, PPC44x_TLB_XLAT	/* Write XLAT */
+
+	/*
+	 * Create PAGEID. This is the faulting address,
+	 * page size, and valid flag.
+	 */
+	li	r11, PPC44x_TLB_VALID | PPC44x_TLB_4K
+	rlwimi	r10, r11, 0, 20, 31		/* Insert valid and page size */
+	tlbwe	r10, r13, PPC44x_TLB_PAGEID	/* Write PAGEID */
+
+	li	r10, PPC44x_TLB_SR@l		/* Set SR */
+	rlwimi	r10, r12, 0, 30, 30		/* Set SW = _PAGE_RW */
+	rlwimi	r10, r12, 29, 29, 29		/* SX = _PAGE_HWEXEC */
+	rlwimi	r10, r12, 29, 28, 28		/* UR = _PAGE_USER */
+	rlwimi	r11, r12, 31, 26, 26		/* (_PAGE_USER>>1)->r12 */
+	and	r11, r12, r11			/* HWEXEC & USER */
+	rlwimi	r10, r11, 0, 26, 26		/* UX = HWEXEC & USER */
+
+	rlwimi	r12, r10, 0, 26, 31		/* Insert static perms */
+	rlwinm	r12, r12, 0, 20, 15		/* Clear U0-U3 */
+	tlbwe	r12, r13, PPC44x_TLB_ATTRIB	/* Write ATTRIB */
+
+	/* Done...restore registers and get out of here.
+	*/
+	mfspr	r11, SPRN_SPRG7R
+	mtcr	r11
+	mfspr	r13, SPRN_SPRG5R
+	mfspr	r12, SPRN_SPRG4R
+	mfspr	r11, SPRN_SPRG1
+	mfspr	r10, SPRN_SPRG0
+	rfi					/* Force context change */
+
+/*
+ * Global functions
+ */
+
+/*
+ * extern void giveup_altivec(struct task_struct *prev)
+ *
+ * The 44x core does not have an AltiVec unit.
+ */
+_GLOBAL(giveup_altivec)
+	blr
+
+/*
+ * extern void giveup_fpu(struct task_struct *prev)
+ *
+ * The 44x core does not have an FPU.
+ */
+#ifndef CONFIG_PPC_FPU
+_GLOBAL(giveup_fpu)
+	blr
+#endif
+
+/*
+ * extern void abort(void)
+ *
+ * At present, this routine just applies a system reset.
+ */
+_GLOBAL(abort)
+        mfspr   r13,SPRN_DBCR0
+        oris    r13,r13,DBCR0_RST_SYSTEM@h
+        mtspr   SPRN_DBCR0,r13
+
+_GLOBAL(set_context)
+
+#ifdef CONFIG_BDI_SWITCH
+	/* Context switch the PTE pointer for the Abatron BDI2000.
+	 * The PGDIR is the second parameter.
+	 */
+	lis	r5, abatron_pteptrs@h
+	ori	r5, r5, abatron_pteptrs@l
+	stw	r4, 0x4(r5)
+#endif
+	mtspr	SPRN_PID,r3
+	isync			/* Force context change */
+	blr
+
+/*
+ * We put a few things here that have to be page-aligned. This stuff
+ * goes at the beginning of the data segment, which is page-aligned.
+ */
+	.data
+	.align	12
+	.globl	sdata
+sdata:
+	.globl	empty_zero_page
+empty_zero_page:
+	.space	4096
+
+/*
+ * To support >32-bit physical addresses, we use an 8KB pgdir.
+ */
+	.globl	swapper_pg_dir
+swapper_pg_dir:
+	.space	8192
+
+/* Reserved 4k for the critical exception stack & 4k for the machine
+ * check stack per CPU for kernel mode exceptions */
+	.section .bss
+        .align 12
+exception_stack_bottom:
+	.space	BOOKE_EXCEPTION_STACK_SIZE
+	.globl	exception_stack_top
+exception_stack_top:
+
+/*
+ * This space gets a copy of optional info passed to us by the bootstrap
+ * which is used to pass parameters into the kernel like root=/dev/sda1, etc.
+ */
+	.globl	cmd_line
+cmd_line:
+	.space	512
+
+/*
+ * Room for two PTE pointers, usually the kernel and current user pointers
+ * to their respective root page table.
+ */
+abatron_pteptrs:
+	.space	8
diff --git a/arch/powerpc/kernel/head_4xx.S b/arch/powerpc/kernel/head_4xx.S
new file mode 100644
index 000000000000..2590e97f5539
--- /dev/null
+++ b/arch/powerpc/kernel/head_4xx.S
@@ -0,0 +1,1022 @@
+/*
+ *    Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
+ *      Initial PowerPC version.
+ *    Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu>
+ *      Rewritten for PReP
+ *    Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
+ *      Low-level exception handers, MMU support, and rewrite.
+ *    Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
+ *      PowerPC 8xx modifications.
+ *    Copyright (c) 1998-1999 TiVo, Inc.
+ *      PowerPC 403GCX modifications.
+ *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ *      PowerPC 403GCX/405GP modifications.
+ *    Copyright 2000 MontaVista Software Inc.
+ *	PPC405 modifications
+ *      PowerPC 403GCX/405GP modifications.
+ * 	Author: MontaVista Software, Inc.
+ *         	frank_rowand@mvista.com or source@mvista.com
+ * 	   	debbie_chu@mvista.com
+ *
+ *
+ *    Module name: head_4xx.S
+ *
+ *    Description:
+ *      Kernel execution entry point code.
+ *
+ *    This program is free software; you can redistribute it and/or
+ *    modify it under the terms of the GNU General Public License
+ *    as published by the Free Software Foundation; either version
+ *    2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/pgtable.h>
+#include <asm/ibm4xx.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+
+/* As with the other PowerPC ports, it is expected that when code
+ * execution begins here, the following registers contain valid, yet
+ * optional, information:
+ *
+ *   r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.)
+ *   r4 - Starting address of the init RAM disk
+ *   r5 - Ending address of the init RAM disk
+ *   r6 - Start of kernel command line string (e.g. "mem=96m")
+ *   r7 - End of kernel command line string
+ *
+ * This is all going to change RSN when we add bi_recs.......  -- Dan
+ */
+	.text
+_GLOBAL(_stext)
+_GLOBAL(_start)
+
+	/* Save parameters we are passed.
+	*/
+	mr	r31,r3
+	mr	r30,r4
+	mr	r29,r5
+	mr	r28,r6
+	mr	r27,r7
+
+	/* We have to turn on the MMU right away so we get cache modes
+	 * set correctly.
+	 */
+	bl	initial_mmu
+
+/* We now have the lower 16 Meg mapped into TLB entries, and the caches
+ * ready to work.
+ */
+turn_on_mmu:
+	lis	r0,MSR_KERNEL@h
+	ori	r0,r0,MSR_KERNEL@l
+	mtspr	SPRN_SRR1,r0
+	lis	r0,start_here@h
+	ori	r0,r0,start_here@l
+	mtspr	SPRN_SRR0,r0
+	SYNC
+	rfi				/* enables MMU */
+	b	.			/* prevent prefetch past rfi */
+
+/*
+ * This area is used for temporarily saving registers during the
+ * critical exception prolog.
+ */
+	. = 0xc0
+crit_save:
+_GLOBAL(crit_r10)
+	.space	4
+_GLOBAL(crit_r11)
+	.space	4
+
+/*
+ * Exception vector entry code. This code runs with address translation
+ * turned off (i.e. using physical addresses). We assume SPRG3 has the
+ * physical address of the current task thread_struct.
+ * Note that we have to have decremented r1 before we write to any fields
+ * of the exception frame, since a critical interrupt could occur at any
+ * time, and it will write to the area immediately below the current r1.
+ */
+#define NORMAL_EXCEPTION_PROLOG						     \
+	mtspr	SPRN_SPRG0,r10;		/* save two registers to work with */\
+	mtspr	SPRN_SPRG1,r11;						     \
+	mtspr	SPRN_SPRG2,r1;						     \
+	mfcr	r10;			/* save CR in r10 for now	   */\
+	mfspr	r11,SPRN_SRR1;		/* check whether user or kernel    */\
+	andi.	r11,r11,MSR_PR;						     \
+	beq	1f;							     \
+	mfspr	r1,SPRN_SPRG3;		/* if from user, start at top of   */\
+	lwz	r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack   */\
+	addi	r1,r1,THREAD_SIZE;					     \
+1:	subi	r1,r1,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
+	tophys(r11,r1);							     \
+	stw	r10,_CCR(r11);          /* save various registers	   */\
+	stw	r12,GPR12(r11);						     \
+	stw	r9,GPR9(r11);						     \
+	mfspr	r10,SPRN_SPRG0;						     \
+	stw	r10,GPR10(r11);						     \
+	mfspr	r12,SPRN_SPRG1;						     \
+	stw	r12,GPR11(r11);						     \
+	mflr	r10;							     \
+	stw	r10,_LINK(r11);						     \
+	mfspr	r10,SPRN_SPRG2;						     \
+	mfspr	r12,SPRN_SRR0;						     \
+	stw	r10,GPR1(r11);						     \
+	mfspr	r9,SPRN_SRR1;						     \
+	stw	r10,0(r11);						     \
+	rlwinm	r9,r9,0,14,12;		/* clear MSR_WE (necessary?)	   */\
+	stw	r0,GPR0(r11);						     \
+	SAVE_4GPRS(3, r11);						     \
+	SAVE_2GPRS(7, r11)
+
+/*
+ * Exception prolog for critical exceptions.  This is a little different
+ * from the normal exception prolog above since a critical exception
+ * can potentially occur at any point during normal exception processing.
+ * Thus we cannot use the same SPRG registers as the normal prolog above.
+ * Instead we use a couple of words of memory at low physical addresses.
+ * This is OK since we don't support SMP on these processors.
+ */
+#define CRITICAL_EXCEPTION_PROLOG					     \
+	stw	r10,crit_r10@l(0);	/* save two registers to work with */\
+	stw	r11,crit_r11@l(0);					     \
+	mfcr	r10;			/* save CR in r10 for now	   */\
+	mfspr	r11,SPRN_SRR3;		/* check whether user or kernel    */\
+	andi.	r11,r11,MSR_PR;						     \
+	lis	r11,critical_stack_top@h;				     \
+	ori	r11,r11,critical_stack_top@l;				     \
+	beq	1f;							     \
+	/* COMING FROM USER MODE */					     \
+	mfspr	r11,SPRN_SPRG3;		/* if from user, start at top of   */\
+	lwz	r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
+	addi	r11,r11,THREAD_SIZE;					     \
+1:	subi	r11,r11,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
+	tophys(r11,r11);						     \
+	stw	r10,_CCR(r11);          /* save various registers	   */\
+	stw	r12,GPR12(r11);						     \
+	stw	r9,GPR9(r11);						     \
+	mflr	r10;							     \
+	stw	r10,_LINK(r11);						     \
+	mfspr	r12,SPRN_DEAR;		/* save DEAR and ESR in the frame  */\
+	stw	r12,_DEAR(r11);		/* since they may have had stuff   */\
+	mfspr	r9,SPRN_ESR;		/* in them at the point where the  */\
+	stw	r9,_ESR(r11);		/* exception was taken		   */\
+	mfspr	r12,SPRN_SRR2;						     \
+	stw	r1,GPR1(r11);						     \
+	mfspr	r9,SPRN_SRR3;						     \
+	stw	r1,0(r11);						     \
+	tovirt(r1,r11);							     \
+	rlwinm	r9,r9,0,14,12;		/* clear MSR_WE (necessary?)	   */\
+	stw	r0,GPR0(r11);						     \
+	SAVE_4GPRS(3, r11);						     \
+	SAVE_2GPRS(7, r11)
+
+	/*
+	 * State at this point:
+	 * r9 saved in stack frame, now saved SRR3 & ~MSR_WE
+	 * r10 saved in crit_r10 and in stack frame, trashed
+	 * r11 saved in crit_r11 and in stack frame,
+	 *	now phys stack/exception frame pointer
+	 * r12 saved in stack frame, now saved SRR2
+	 * CR saved in stack frame, CR0.EQ = !SRR3.PR
+	 * LR, DEAR, ESR in stack frame
+	 * r1 saved in stack frame, now virt stack/excframe pointer
+	 * r0, r3-r8 saved in stack frame
+	 */
+
+/*
+ * Exception vectors.
+ */
+#define	START_EXCEPTION(n, label)					     \
+	. = n;								     \
+label:
+
+#define EXCEPTION(n, label, hdlr, xfer)				\
+	START_EXCEPTION(n, label);				\
+	NORMAL_EXCEPTION_PROLOG;				\
+	addi	r3,r1,STACK_FRAME_OVERHEAD;			\
+	xfer(n, hdlr)
+
+#define CRITICAL_EXCEPTION(n, label, hdlr)			\
+	START_EXCEPTION(n, label);				\
+	CRITICAL_EXCEPTION_PROLOG;				\
+	addi	r3,r1,STACK_FRAME_OVERHEAD;			\
+	EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
+			  NOCOPY, crit_transfer_to_handler,	\
+			  ret_from_crit_exc)
+
+#define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret)	\
+	li	r10,trap;					\
+	stw	r10,_TRAP(r11);					\
+	lis	r10,msr@h;					\
+	ori	r10,r10,msr@l;					\
+	copyee(r10, r9);					\
+	bl	tfer;		 				\
+	.long	hdlr;						\
+	.long	ret
+
+#define COPY_EE(d, s)		rlwimi d,s,0,16,16
+#define NOCOPY(d, s)
+
+#define EXC_XFER_STD(n, hdlr)		\
+	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \
+			  ret_from_except_full)
+
+#define EXC_XFER_LITE(n, hdlr)		\
+	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
+			  ret_from_except)
+
+#define EXC_XFER_EE(n, hdlr)		\
+	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \
+			  ret_from_except_full)
+
+#define EXC_XFER_EE_LITE(n, hdlr)	\
+	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \
+			  ret_from_except)
+
+
+/*
+ * 0x0100 - Critical Interrupt Exception
+ */
+	CRITICAL_EXCEPTION(0x0100, CriticalInterrupt, unknown_exception)
+
+/*
+ * 0x0200 - Machine Check Exception
+ */
+	CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
+
+/*
+ * 0x0300 - Data Storage Exception
+ * This happens for just a few reasons.  U0 set (but we don't do that),
+ * or zone protection fault (user violation, write to protected page).
+ * If this is just an update of modified status, we do that quickly
+ * and exit.  Otherwise, we call heavywight functions to do the work.
+ */
+	START_EXCEPTION(0x0300,	DataStorage)
+	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
+	mtspr	SPRN_SPRG1, r11
+#ifdef CONFIG_403GCX
+	stw     r12, 0(r0)
+	stw     r9, 4(r0)
+	mfcr    r11
+	mfspr   r12, SPRN_PID
+	stw     r11, 8(r0)
+	stw     r12, 12(r0)
+#else
+	mtspr	SPRN_SPRG4, r12
+	mtspr	SPRN_SPRG5, r9
+	mfcr	r11
+	mfspr	r12, SPRN_PID
+	mtspr	SPRN_SPRG7, r11
+	mtspr	SPRN_SPRG6, r12
+#endif
+
+	/* First, check if it was a zone fault (which means a user
+	* tried to access a kernel or read-protected page - always
+	* a SEGV).  All other faults here must be stores, so no
+	* need to check ESR_DST as well. */
+	mfspr	r10, SPRN_ESR
+	andis.	r10, r10, ESR_DIZ@h
+	bne	2f
+
+	mfspr	r10, SPRN_DEAR		/* Get faulting address */
+
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	lis	r11, TASK_SIZE@h
+	cmplw	r10, r11
+	blt+	3f
+	lis	r11, swapper_pg_dir@h
+	ori	r11, r11, swapper_pg_dir@l
+	li	r9, 0
+	mtspr	SPRN_PID, r9		/* TLB will have 0 TID */
+	b	4f
+
+	/* Get the PGD for the current thread.
+	 */
+3:
+	mfspr	r11,SPRN_SPRG3
+	lwz	r11,PGDIR(r11)
+4:
+	tophys(r11, r11)
+	rlwimi	r11, r10, 12, 20, 29	/* Create L1 (pgdir/pmd) address */
+	lwz	r11, 0(r11)		/* Get L1 entry */
+	rlwinm.	r12, r11, 0, 0, 19	/* Extract L2 (pte) base address */
+	beq	2f			/* Bail if no table */
+
+	rlwimi	r12, r10, 22, 20, 29	/* Compute PTE address */
+	lwz	r11, 0(r12)		/* Get Linux PTE */
+
+	andi.	r9, r11, _PAGE_RW	/* Is it writeable? */
+	beq	2f			/* Bail if not */
+
+	/* Update 'changed'.
+	*/
+	ori	r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
+	stw	r11, 0(r12)		/* Update Linux page table */
+
+	/* Most of the Linux PTE is ready to load into the TLB LO.
+	 * We set ZSEL, where only the LS-bit determines user access.
+	 * We set execute, because we don't have the granularity to
+	 * properly set this at the page level (Linux problem).
+	 * If shared is set, we cause a zero PID->TID load.
+	 * Many of these bits are software only.  Bits we don't set
+	 * here we (properly should) assume have the appropriate value.
+	 */
+	li	r12, 0x0ce2
+	andc	r11, r11, r12		/* Make sure 20, 21 are zero */
+
+	/* find the TLB index that caused the fault.  It has to be here.
+	*/
+	tlbsx	r9, 0, r10
+
+	tlbwe	r11, r9, TLB_DATA		/* Load TLB LO */
+
+	/* Done...restore registers and get out of here.
+	*/
+#ifdef CONFIG_403GCX
+	lwz     r12, 12(r0)
+	lwz     r11, 8(r0)
+	mtspr   SPRN_PID, r12
+	mtcr    r11
+	lwz     r9, 4(r0)
+	lwz     r12, 0(r0)
+#else
+	mfspr	r12, SPRN_SPRG6
+	mfspr	r11, SPRN_SPRG7
+	mtspr	SPRN_PID, r12
+	mtcr	r11
+	mfspr	r9, SPRN_SPRG5
+	mfspr	r12, SPRN_SPRG4
+#endif
+	mfspr	r11, SPRN_SPRG1
+	mfspr	r10, SPRN_SPRG0
+	PPC405_ERR77_SYNC
+	rfi			/* Should sync shadow TLBs */
+	b	.		/* prevent prefetch past rfi */
+
+2:
+	/* The bailout.  Restore registers to pre-exception conditions
+	 * and call the heavyweights to help us out.
+	 */
+#ifdef CONFIG_403GCX
+	lwz     r12, 12(r0)
+	lwz     r11, 8(r0)
+	mtspr   SPRN_PID, r12
+	mtcr    r11
+	lwz     r9, 4(r0)
+	lwz     r12, 0(r0)
+#else
+	mfspr	r12, SPRN_SPRG6
+	mfspr	r11, SPRN_SPRG7
+	mtspr	SPRN_PID, r12
+	mtcr	r11
+	mfspr	r9, SPRN_SPRG5
+	mfspr	r12, SPRN_SPRG4
+#endif
+	mfspr	r11, SPRN_SPRG1
+	mfspr	r10, SPRN_SPRG0
+	b	DataAccess
+
+/*
+ * 0x0400 - Instruction Storage Exception
+ * This is caused by a fetch from non-execute or guarded pages.
+ */
+	START_EXCEPTION(0x0400, InstructionAccess)
+	NORMAL_EXCEPTION_PROLOG
+	mr	r4,r12			/* Pass SRR0 as arg2 */
+	li	r5,0			/* Pass zero as arg3 */
+	EXC_XFER_EE_LITE(0x400, handle_page_fault)
+
+/* 0x0500 - External Interrupt Exception */
+	EXCEPTION(0x0500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
+
+/* 0x0600 - Alignment Exception */
+	START_EXCEPTION(0x0600, Alignment)
+	NORMAL_EXCEPTION_PROLOG
+	mfspr	r4,SPRN_DEAR		/* Grab the DEAR and save it */
+	stw	r4,_DEAR(r11)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_EE(0x600, alignment_exception)
+
+/* 0x0700 - Program Exception */
+	START_EXCEPTION(0x0700, ProgramCheck)
+	NORMAL_EXCEPTION_PROLOG
+	mfspr	r4,SPRN_ESR		/* Grab the ESR and save it */
+	stw	r4,_ESR(r11)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_STD(0x700, program_check_exception)
+
+	EXCEPTION(0x0800, Trap_08, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x0900, Trap_09, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x0A00, Trap_0A, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x0B00, Trap_0B, unknown_exception, EXC_XFER_EE)
+
+/* 0x0C00 - System Call Exception */
+	START_EXCEPTION(0x0C00,	SystemCall)
+	NORMAL_EXCEPTION_PROLOG
+	EXC_XFER_EE_LITE(0xc00, DoSyscall)
+
+	EXCEPTION(0x0D00, Trap_0D, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x0E00, Trap_0E, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x0F00, Trap_0F, unknown_exception, EXC_XFER_EE)
+
+/* 0x1000 - Programmable Interval Timer (PIT) Exception */
+	START_EXCEPTION(0x1000, Decrementer)
+	NORMAL_EXCEPTION_PROLOG
+	lis	r0,TSR_PIS@h
+	mtspr	SPRN_TSR,r0		/* Clear the PIT exception */
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_LITE(0x1000, timer_interrupt)
+
+#if 0
+/* NOTE:
+ * FIT and WDT handlers are not implemented yet.
+ */
+
+/* 0x1010 - Fixed Interval Timer (FIT) Exception
+*/
+	STND_EXCEPTION(0x1010,	FITException,		unknown_exception)
+
+/* 0x1020 - Watchdog Timer (WDT) Exception
+*/
+#ifdef CONFIG_BOOKE_WDT
+	CRITICAL_EXCEPTION(0x1020, WDTException, WatchdogException)
+#else
+	CRITICAL_EXCEPTION(0x1020, WDTException, unknown_exception)
+#endif
+#endif
+
+/* 0x1100 - Data TLB Miss Exception
+ * As the name implies, translation is not in the MMU, so search the
+ * page tables and fix it.  The only purpose of this function is to
+ * load TLB entries from the page table if they exist.
+ */
+	START_EXCEPTION(0x1100,	DTLBMiss)
+	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
+	mtspr	SPRN_SPRG1, r11
+#ifdef CONFIG_403GCX
+	stw     r12, 0(r0)
+	stw     r9, 4(r0)
+	mfcr    r11
+	mfspr   r12, SPRN_PID
+	stw     r11, 8(r0)
+	stw     r12, 12(r0)
+#else
+	mtspr	SPRN_SPRG4, r12
+	mtspr	SPRN_SPRG5, r9
+	mfcr	r11
+	mfspr	r12, SPRN_PID
+	mtspr	SPRN_SPRG7, r11
+	mtspr	SPRN_SPRG6, r12
+#endif
+	mfspr	r10, SPRN_DEAR		/* Get faulting address */
+
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	lis	r11, TASK_SIZE@h
+	cmplw	r10, r11
+	blt+	3f
+	lis	r11, swapper_pg_dir@h
+	ori	r11, r11, swapper_pg_dir@l
+	li	r9, 0
+	mtspr	SPRN_PID, r9		/* TLB will have 0 TID */
+	b	4f
+
+	/* Get the PGD for the current thread.
+	 */
+3:
+	mfspr	r11,SPRN_SPRG3
+	lwz	r11,PGDIR(r11)
+4:
+	tophys(r11, r11)
+	rlwimi	r11, r10, 12, 20, 29	/* Create L1 (pgdir/pmd) address */
+	lwz	r12, 0(r11)		/* Get L1 entry */
+	andi.	r9, r12, _PMD_PRESENT	/* Check if it points to a PTE page */
+	beq	2f			/* Bail if no table */
+
+	rlwimi	r12, r10, 22, 20, 29	/* Compute PTE address */
+	lwz	r11, 0(r12)		/* Get Linux PTE */
+	andi.	r9, r11, _PAGE_PRESENT
+	beq	5f
+
+	ori	r11, r11, _PAGE_ACCESSED
+	stw	r11, 0(r12)
+
+	/* Create TLB tag.  This is the faulting address plus a static
+	 * set of bits.  These are size, valid, E, U0.
+	*/
+	li	r12, 0x00c0
+	rlwimi	r10, r12, 0, 20, 31
+
+	b	finish_tlb_load
+
+2:	/* Check for possible large-page pmd entry */
+	rlwinm.	r9, r12, 2, 22, 24
+	beq	5f
+
+	/* Create TLB tag.  This is the faulting address, plus a static
+	 * set of bits (valid, E, U0) plus the size from the PMD.
+	 */
+	ori	r9, r9, 0x40
+	rlwimi	r10, r9, 0, 20, 31
+	mr	r11, r12
+
+	b	finish_tlb_load
+
+5:
+	/* The bailout.  Restore registers to pre-exception conditions
+	 * and call the heavyweights to help us out.
+	 */
+#ifdef CONFIG_403GCX
+	lwz     r12, 12(r0)
+	lwz     r11, 8(r0)
+	mtspr   SPRN_PID, r12
+	mtcr    r11
+	lwz     r9, 4(r0)
+	lwz     r12, 0(r0)
+#else
+	mfspr	r12, SPRN_SPRG6
+	mfspr	r11, SPRN_SPRG7
+	mtspr	SPRN_PID, r12
+	mtcr	r11
+	mfspr	r9, SPRN_SPRG5
+	mfspr	r12, SPRN_SPRG4
+#endif
+	mfspr	r11, SPRN_SPRG1
+	mfspr	r10, SPRN_SPRG0
+	b	DataAccess
+
+/* 0x1200 - Instruction TLB Miss Exception
+ * Nearly the same as above, except we get our information from different
+ * registers and bailout to a different point.
+ */
+	START_EXCEPTION(0x1200,	ITLBMiss)
+	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
+	mtspr	SPRN_SPRG1, r11
+#ifdef CONFIG_403GCX
+	stw     r12, 0(r0)
+	stw     r9, 4(r0)
+	mfcr    r11
+	mfspr   r12, SPRN_PID
+	stw     r11, 8(r0)
+	stw     r12, 12(r0)
+#else
+	mtspr	SPRN_SPRG4, r12
+	mtspr	SPRN_SPRG5, r9
+	mfcr	r11
+	mfspr	r12, SPRN_PID
+	mtspr	SPRN_SPRG7, r11
+	mtspr	SPRN_SPRG6, r12
+#endif
+	mfspr	r10, SPRN_SRR0		/* Get faulting address */
+
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	lis	r11, TASK_SIZE@h
+	cmplw	r10, r11
+	blt+	3f
+	lis	r11, swapper_pg_dir@h
+	ori	r11, r11, swapper_pg_dir@l
+	li	r9, 0
+	mtspr	SPRN_PID, r9		/* TLB will have 0 TID */
+	b	4f
+
+	/* Get the PGD for the current thread.
+	 */
+3:
+	mfspr	r11,SPRN_SPRG3
+	lwz	r11,PGDIR(r11)
+4:
+	tophys(r11, r11)
+	rlwimi	r11, r10, 12, 20, 29	/* Create L1 (pgdir/pmd) address */
+	lwz	r12, 0(r11)		/* Get L1 entry */
+	andi.	r9, r12, _PMD_PRESENT	/* Check if it points to a PTE page */
+	beq	2f			/* Bail if no table */
+
+	rlwimi	r12, r10, 22, 20, 29	/* Compute PTE address */
+	lwz	r11, 0(r12)		/* Get Linux PTE */
+	andi.	r9, r11, _PAGE_PRESENT
+	beq	5f
+
+	ori	r11, r11, _PAGE_ACCESSED
+	stw	r11, 0(r12)
+
+	/* Create TLB tag.  This is the faulting address plus a static
+	 * set of bits.  These are size, valid, E, U0.
+	*/
+	li	r12, 0x00c0
+	rlwimi	r10, r12, 0, 20, 31
+
+	b	finish_tlb_load
+
+2:	/* Check for possible large-page pmd entry */
+	rlwinm.	r9, r12, 2, 22, 24
+	beq	5f
+
+	/* Create TLB tag.  This is the faulting address, plus a static
+	 * set of bits (valid, E, U0) plus the size from the PMD.
+	 */
+	ori	r9, r9, 0x40
+	rlwimi	r10, r9, 0, 20, 31
+	mr	r11, r12
+
+	b	finish_tlb_load
+
+5:
+	/* The bailout.  Restore registers to pre-exception conditions
+	 * and call the heavyweights to help us out.
+	 */
+#ifdef CONFIG_403GCX
+	lwz     r12, 12(r0)
+	lwz     r11, 8(r0)
+	mtspr   SPRN_PID, r12
+	mtcr    r11
+	lwz     r9, 4(r0)
+	lwz     r12, 0(r0)
+#else
+	mfspr	r12, SPRN_SPRG6
+	mfspr	r11, SPRN_SPRG7
+	mtspr	SPRN_PID, r12
+	mtcr	r11
+	mfspr	r9, SPRN_SPRG5
+	mfspr	r12, SPRN_SPRG4
+#endif
+	mfspr	r11, SPRN_SPRG1
+	mfspr	r10, SPRN_SPRG0
+	b	InstructionAccess
+
+	EXCEPTION(0x1300, Trap_13, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1400, Trap_14, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_EE)
+#ifdef CONFIG_IBM405_ERR51
+	/* 405GP errata 51 */
+	START_EXCEPTION(0x1700, Trap_17)
+	b DTLBMiss
+#else
+	EXCEPTION(0x1700, Trap_17, unknown_exception, EXC_XFER_EE)
+#endif
+	EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1A00, Trap_1A, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1B00, Trap_1B, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1C00, Trap_1C, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1D00, Trap_1D, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1E00, Trap_1E, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1F00, Trap_1F, unknown_exception, EXC_XFER_EE)
+
+/* Check for a single step debug exception while in an exception
+ * handler before state has been saved.  This is to catch the case
+ * where an instruction that we are trying to single step causes
+ * an exception (eg ITLB/DTLB miss) and thus the first instruction of
+ * the exception handler generates a single step debug exception.
+ *
+ * If we get a debug trap on the first instruction of an exception handler,
+ * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is
+ * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR).
+ * The exception handler was handling a non-critical interrupt, so it will
+ * save (and later restore) the MSR via SPRN_SRR1, which will still have
+ * the MSR_DE bit set.
+ */
+	/* 0x2000 - Debug Exception */
+	START_EXCEPTION(0x2000, DebugTrap)
+	CRITICAL_EXCEPTION_PROLOG
+
+	/*
+	 * If this is a single step or branch-taken exception in an
+	 * exception entry sequence, it was probably meant to apply to
+	 * the code where the exception occurred (since exception entry
+	 * doesn't turn off DE automatically).  We simulate the effect
+	 * of turning off DE on entry to an exception handler by turning
+	 * off DE in the SRR3 value and clearing the debug status.
+	 */
+	mfspr	r10,SPRN_DBSR		/* check single-step/branch taken */
+	andis.	r10,r10,DBSR_IC@h
+	beq+	2f
+
+	andi.	r10,r9,MSR_IR|MSR_PR	/* check supervisor + MMU off */
+	beq	1f			/* branch and fix it up */
+
+	mfspr   r10,SPRN_SRR2		/* Faulting instruction address */
+	cmplwi  r10,0x2100
+	bgt+    2f			/* address above exception vectors */
+
+	/* here it looks like we got an inappropriate debug exception. */
+1:	rlwinm	r9,r9,0,~MSR_DE		/* clear DE in the SRR3 value */
+	lis	r10,DBSR_IC@h		/* clear the IC event */
+	mtspr	SPRN_DBSR,r10
+	/* restore state and get out */
+	lwz	r10,_CCR(r11)
+	lwz	r0,GPR0(r11)
+	lwz	r1,GPR1(r11)
+	mtcrf	0x80,r10
+	mtspr	SPRN_SRR2,r12
+	mtspr	SPRN_SRR3,r9
+	lwz	r9,GPR9(r11)
+	lwz	r12,GPR12(r11)
+	lwz	r10,crit_r10@l(0)
+	lwz	r11,crit_r11@l(0)
+	PPC405_ERR77_SYNC
+	rfci
+	b	.
+
+	/* continue normal handling for a critical exception... */
+2:	mfspr	r4,SPRN_DBSR
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_TEMPLATE(DebugException, 0x2002, \
+		(MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
+		NOCOPY, crit_transfer_to_handler, ret_from_crit_exc)
+
+/*
+ * The other Data TLB exceptions bail out to this point
+ * if they can't resolve the lightweight TLB fault.
+ */
+DataAccess:
+	NORMAL_EXCEPTION_PROLOG
+	mfspr	r5,SPRN_ESR		/* Grab the ESR, save it, pass arg3 */
+	stw	r5,_ESR(r11)
+	mfspr	r4,SPRN_DEAR		/* Grab the DEAR, save it, pass arg2 */
+	EXC_XFER_EE_LITE(0x300, handle_page_fault)
+
+/* Other PowerPC processors, namely those derived from the 6xx-series
+ * have vectors from 0x2100 through 0x2F00 defined, but marked as reserved.
+ * However, for the 4xx-series processors these are neither defined nor
+ * reserved.
+ */
+
+	/* Damn, I came up one instruction too many to fit into the
+	 * exception space :-).  Both the instruction and data TLB
+	 * miss get to this point to load the TLB.
+	 * 	r10 - TLB_TAG value
+	 * 	r11 - Linux PTE
+	 *	r12, r9 - avilable to use
+	 *	PID - loaded with proper value when we get here
+	 *	Upon exit, we reload everything and RFI.
+	 * Actually, it will fit now, but oh well.....a common place
+	 * to load the TLB.
+	 */
+tlb_4xx_index:
+	.long	0
+finish_tlb_load:
+	/* load the next available TLB index.
+	*/
+	lwz	r9, tlb_4xx_index@l(0)
+	addi	r9, r9, 1
+	andi.	r9, r9, (PPC4XX_TLB_SIZE-1)
+	stw	r9, tlb_4xx_index@l(0)
+
+6:
+	/*
+	 * Clear out the software-only bits in the PTE to generate the
+	 * TLB_DATA value.  These are the bottom 2 bits of the RPM, the
+	 * top 3 bits of the zone field, and M.
+	 */
+	li	r12, 0x0ce2
+	andc	r11, r11, r12
+
+	tlbwe	r11, r9, TLB_DATA		/* Load TLB LO */
+	tlbwe	r10, r9, TLB_TAG		/* Load TLB HI */
+
+	/* Done...restore registers and get out of here.
+	*/
+#ifdef CONFIG_403GCX
+	lwz     r12, 12(r0)
+	lwz     r11, 8(r0)
+	mtspr   SPRN_PID, r12
+	mtcr    r11
+	lwz     r9, 4(r0)
+	lwz     r12, 0(r0)
+#else
+	mfspr	r12, SPRN_SPRG6
+	mfspr	r11, SPRN_SPRG7
+	mtspr	SPRN_PID, r12
+	mtcr	r11
+	mfspr	r9, SPRN_SPRG5
+	mfspr	r12, SPRN_SPRG4
+#endif
+	mfspr	r11, SPRN_SPRG1
+	mfspr	r10, SPRN_SPRG0
+	PPC405_ERR77_SYNC
+	rfi			/* Should sync shadow TLBs */
+	b	.		/* prevent prefetch past rfi */
+
+/* extern void giveup_fpu(struct task_struct *prev)
+ *
+ * The PowerPC 4xx family of processors do not have an FPU, so this just
+ * returns.
+ */
+_GLOBAL(giveup_fpu)
+	blr
+
+/* This is where the main kernel code starts.
+ */
+start_here:
+
+	/* ptr to current */
+	lis	r2,init_task@h
+	ori	r2,r2,init_task@l
+
+	/* ptr to phys current thread */
+	tophys(r4,r2)
+	addi	r4,r4,THREAD	/* init task's THREAD */
+	mtspr	SPRN_SPRG3,r4
+
+	/* stack */
+	lis	r1,init_thread_union@ha
+	addi	r1,r1,init_thread_union@l
+	li	r0,0
+	stwu	r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
+
+	bl	early_init	/* We have to do this with MMU on */
+
+/*
+ * Decide what sort of machine this is and initialize the MMU.
+ */
+	mr	r3,r31
+	mr	r4,r30
+	mr	r5,r29
+	mr	r6,r28
+	mr	r7,r27
+	bl	machine_init
+	bl	MMU_init
+
+/* Go back to running unmapped so we can load up new values
+ * and change to using our exception vectors.
+ * On the 4xx, all we have to do is invalidate the TLB to clear
+ * the old 16M byte TLB mappings.
+ */
+	lis	r4,2f@h
+	ori	r4,r4,2f@l
+	tophys(r4,r4)
+	lis	r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@h
+	ori	r3,r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@l
+	mtspr	SPRN_SRR0,r4
+	mtspr	SPRN_SRR1,r3
+	rfi
+	b	.		/* prevent prefetch past rfi */
+
+/* Load up the kernel context */
+2:
+	sync			/* Flush to memory before changing TLB */
+	tlbia
+	isync			/* Flush shadow TLBs */
+
+	/* set up the PTE pointers for the Abatron bdiGDB.
+	*/
+	lis	r6, swapper_pg_dir@h
+	ori	r6, r6, swapper_pg_dir@l
+	lis	r5, abatron_pteptrs@h
+	ori	r5, r5, abatron_pteptrs@l
+	stw	r5, 0xf0(r0)	/* Must match your Abatron config file */
+	tophys(r5,r5)
+	stw	r6, 0(r5)
+
+/* Now turn on the MMU for real! */
+	lis	r4,MSR_KERNEL@h
+	ori	r4,r4,MSR_KERNEL@l
+	lis	r3,start_kernel@h
+	ori	r3,r3,start_kernel@l
+	mtspr	SPRN_SRR0,r3
+	mtspr	SPRN_SRR1,r4
+	rfi			/* enable MMU and jump to start_kernel */
+	b	.		/* prevent prefetch past rfi */
+
+/* Set up the initial MMU state so we can do the first level of
+ * kernel initialization.  This maps the first 16 MBytes of memory 1:1
+ * virtual to physical and more importantly sets the cache mode.
+ */
+initial_mmu:
+	tlbia			/* Invalidate all TLB entries */
+	isync
+
+	/* We should still be executing code at physical address 0x0000xxxx
+	 * at this point. However, start_here is at virtual address
+	 * 0xC000xxxx. So, set up a TLB mapping to cover this once
+	 * translation is enabled.
+	 */
+
+	lis	r3,KERNELBASE@h		/* Load the kernel virtual address */
+	ori	r3,r3,KERNELBASE@l
+	tophys(r4,r3)			/* Load the kernel physical address */
+
+	iccci	r0,r3			/* Invalidate the i-cache before use */
+
+	/* Load the kernel PID.
+	*/
+	li	r0,0
+	mtspr	SPRN_PID,r0
+	sync
+
+	/* Configure and load two entries into TLB slots 62 and 63.
+	 * In case we are pinning TLBs, these are reserved in by the
+	 * other TLB functions.  If not reserving, then it doesn't
+	 * matter where they are loaded.
+	 */
+	clrrwi	r4,r4,10		/* Mask off the real page number */
+	ori	r4,r4,(TLB_WR | TLB_EX)	/* Set the write and execute bits */
+
+	clrrwi	r3,r3,10		/* Mask off the effective page number */
+	ori	r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_16M))
+
+        li      r0,63                    /* TLB slot 63 */
+
+	tlbwe	r4,r0,TLB_DATA		/* Load the data portion of the entry */
+	tlbwe	r3,r0,TLB_TAG		/* Load the tag portion of the entry */
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(SERIAL_DEBUG_IO_BASE)
+
+	/* Load a TLB entry for the UART, so that ppc4xx_progress() can use
+	 * the UARTs nice and early.  We use a 4k real==virtual mapping. */
+
+	lis	r3,SERIAL_DEBUG_IO_BASE@h
+	ori	r3,r3,SERIAL_DEBUG_IO_BASE@l
+	mr	r4,r3
+	clrrwi	r4,r4,12
+	ori	r4,r4,(TLB_WR|TLB_I|TLB_M|TLB_G)
+
+	clrrwi	r3,r3,12
+	ori	r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_4K))
+
+	li	r0,0			/* TLB slot 0 */
+	tlbwe	r4,r0,TLB_DATA
+	tlbwe	r3,r0,TLB_TAG
+#endif /* CONFIG_SERIAL_DEBUG_TEXT && SERIAL_DEBUG_IO_BASE */
+
+	isync
+
+	/* Establish the exception vector base
+	*/
+	lis	r4,KERNELBASE@h		/* EVPR only uses the high 16-bits */
+	tophys(r0,r4)			/* Use the physical address */
+	mtspr	SPRN_EVPR,r0
+
+	blr
+
+_GLOBAL(abort)
+        mfspr   r13,SPRN_DBCR0
+        oris    r13,r13,DBCR0_RST_SYSTEM@h
+        mtspr   SPRN_DBCR0,r13
+
+_GLOBAL(set_context)
+
+#ifdef CONFIG_BDI_SWITCH
+	/* Context switch the PTE pointer for the Abatron BDI2000.
+	 * The PGDIR is the second parameter.
+	 */
+	lis	r5, KERNELBASE@h
+	lwz	r5, 0xf0(r5)
+	stw	r4, 0x4(r5)
+#endif
+	sync
+	mtspr	SPRN_PID,r3
+	isync				/* Need an isync to flush shadow */
+					/* TLBs after changing PID */
+	blr
+
+/* We put a few things here that have to be page-aligned. This stuff
+ * goes at the beginning of the data segment, which is page-aligned.
+ */
+	.data
+	.align	12
+	.globl	sdata
+sdata:
+	.globl	empty_zero_page
+empty_zero_page:
+	.space	4096
+	.globl	swapper_pg_dir
+swapper_pg_dir:
+	.space	4096
+
+
+/* Stack for handling critical exceptions from kernel mode */
+	.section .bss
+        .align 12
+exception_stack_bottom:
+	.space	4096
+critical_stack_top:
+	.globl	exception_stack_top
+exception_stack_top:
+
+/* This space gets a copy of optional info passed to us by the bootstrap
+ * which is used to pass parameters into the kernel like root=/dev/sda1, etc.
+ */
+	.globl	cmd_line
+cmd_line:
+	.space	512
+
+/* Room for two PTE pointers, usually the kernel and current user pointers
+ * to their respective root page table.
+ */
+abatron_pteptrs:
+	.space	8
diff --git a/arch/ppc64/kernel/head.S b/arch/powerpc/kernel/head_64.S
index 72c61041151a..8a8bf79ef044 100644
--- a/arch/ppc64/kernel/head.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -25,17 +25,17 @@
 
 #include <linux/config.h>
 #include <linux/threads.h>
-#include <asm/processor.h>
+#include <asm/reg.h>
 #include <asm/page.h>
 #include <asm/mmu.h>
-#include <asm/systemcfg.h>
 #include <asm/ppc_asm.h>
 #include <asm/asm-offsets.h>
 #include <asm/bug.h>
 #include <asm/cputable.h>
 #include <asm/setup.h>
 #include <asm/hvcall.h>
-#include <asm/iSeries/LparMap.h>
+#include <asm/iseries/lpar_map.h>
+#include <asm/thread_info.h>
 
 #ifdef CONFIG_PPC_ISERIES
 #define DO_SOFT_DISABLE
@@ -80,7 +80,7 @@ _stext:
 _GLOBAL(__start)
 	/* NOP this out unconditionally */
 BEGIN_FTR_SECTION
-	b .__start_initialization_multiplatform
+	b	.__start_initialization_multiplatform
 END_FTR_SECTION(0, 1)
 #endif /* CONFIG_PPC_MULTIPLATFORM */
 
@@ -194,29 +194,29 @@ exception_marker:
 #define EX_R12		24
 #define EX_R13		32
 #define EX_SRR0		40
-#define EX_R3		40	/* SLB miss saves R3, but not SRR0 */
 #define EX_DAR		48
-#define EX_LR		48	/* SLB miss saves LR, but not DAR */
 #define EX_DSISR	56
 #define EX_CCR		60
+#define EX_R3		64
+#define EX_LR		72
 
 #define EXCEPTION_PROLOG_PSERIES(area, label)				\
-	mfspr	r13,SPRG3;		/* get paca address into r13 */	\
+	mfspr	r13,SPRN_SPRG3;		/* get paca address into r13 */	\
 	std	r9,area+EX_R9(r13);	/* save r9 - r12 */		\
 	std	r10,area+EX_R10(r13);					\
 	std	r11,area+EX_R11(r13);					\
 	std	r12,area+EX_R12(r13);					\
-	mfspr	r9,SPRG1;						\
+	mfspr	r9,SPRN_SPRG1;						\
 	std	r9,area+EX_R13(r13);					\
 	mfcr	r9;							\
 	clrrdi	r12,r13,32;		/* get high part of &label */	\
 	mfmsr	r10;							\
-	mfspr	r11,SRR0;		/* save SRR0 */			\
+	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
 	ori	r12,r12,(label)@l;	/* virt addr of handler */	\
 	ori	r10,r10,MSR_IR|MSR_DR|MSR_RI;				\
-	mtspr	SRR0,r12;						\
-	mfspr	r12,SRR1;		/* and SRR1 */			\
-	mtspr	SRR1,r10;						\
+	mtspr	SPRN_SRR0,r12;						\
+	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
+	mtspr	SPRN_SRR1,r10;						\
 	rfid;								\
 	b	.	/* prevent speculative execution */
 
@@ -225,12 +225,12 @@ exception_marker:
  * This code runs with relocation on.
  */
 #define EXCEPTION_PROLOG_ISERIES_1(area)				\
-	mfspr	r13,SPRG3;		/* get paca address into r13 */	\
+	mfspr	r13,SPRN_SPRG3;		/* get paca address into r13 */	\
 	std	r9,area+EX_R9(r13);	/* save r9 - r12 */		\
 	std	r10,area+EX_R10(r13);					\
 	std	r11,area+EX_R11(r13);					\
 	std	r12,area+EX_R12(r13);					\
-	mfspr	r9,SPRG1;						\
+	mfspr	r9,SPRN_SPRG1;						\
 	std	r9,area+EX_R13(r13);					\
 	mfcr	r9
 
@@ -283,7 +283,7 @@ exception_marker:
 	std	r9,_LINK(r1);						   \
 	mfctr	r10;			/* save CTR in stackframe	*/ \
 	std	r10,_CTR(r1);						   \
-	mfspr	r11,XER;		/* save XER in stackframe	*/ \
+	mfspr	r11,SPRN_XER;		/* save XER in stackframe	*/ \
 	std	r11,_XER(r1);						   \
 	li	r9,(n)+1;						   \
 	std	r9,_TRAP(r1);		/* set trap number		*/ \
@@ -300,7 +300,7 @@ exception_marker:
 	.globl label##_pSeries;				\
 label##_pSeries:					\
 	HMT_MEDIUM;					\
-	mtspr	SPRG1,r13;		/* save r13 */	\
+	mtspr	SPRN_SPRG1,r13;		/* save r13 */	\
 	RUNLATCH_ON(r13);				\
 	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
 
@@ -308,7 +308,7 @@ label##_pSeries:					\
 	.globl label##_iSeries;				\
 label##_iSeries:					\
 	HMT_MEDIUM;					\
-	mtspr	SPRG1,r13;		/* save r13 */	\
+	mtspr	SPRN_SPRG1,r13;		/* save r13 */	\
 	RUNLATCH_ON(r13);				\
 	EXCEPTION_PROLOG_ISERIES_1(area);		\
 	EXCEPTION_PROLOG_ISERIES_2;			\
@@ -318,7 +318,7 @@ label##_iSeries:					\
 	.globl label##_iSeries;						\
 label##_iSeries:							\
 	HMT_MEDIUM;							\
-	mtspr	SPRG1,r13;		/* save r13 */			\
+	mtspr	SPRN_SPRG1,r13;		/* save r13 */			\
 	RUNLATCH_ON(r13);						\
 	EXCEPTION_PROLOG_ISERIES_1(PACA_EXGEN);				\
 	lbz	r10,PACAPROCENABLED(r13);				\
@@ -388,7 +388,7 @@ __start_interrupts:
 	. = 0x200
 _machine_check_pSeries:
 	HMT_MEDIUM
-	mtspr	SPRG1,r13		/* save r13 */
+	mtspr	SPRN_SPRG1,r13		/* save r13 */
 	RUNLATCH_ON(r13)
 	EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
 
@@ -396,18 +396,18 @@ _machine_check_pSeries:
 	.globl data_access_pSeries
 data_access_pSeries:
 	HMT_MEDIUM
-	mtspr	SPRG1,r13
+	mtspr	SPRN_SPRG1,r13
 BEGIN_FTR_SECTION
-	mtspr	SPRG2,r12
-	mfspr	r13,DAR
-	mfspr	r12,DSISR
+	mtspr	SPRN_SPRG2,r12
+	mfspr	r13,SPRN_DAR
+	mfspr	r12,SPRN_DSISR
 	srdi	r13,r13,60
 	rlwimi	r13,r12,16,0x20
 	mfcr	r12
 	cmpwi	r13,0x2c
 	beq	.do_stab_bolted_pSeries
 	mtcrf	0x80,r12
-	mfspr	r12,SPRG2
+	mfspr	r12,SPRN_SPRG2
 END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
 	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common)
 
@@ -415,20 +415,25 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
 	.globl data_access_slb_pSeries
 data_access_slb_pSeries:
 	HMT_MEDIUM
-	mtspr	SPRG1,r13
+	mtspr	SPRN_SPRG1,r13
 	RUNLATCH_ON(r13)
-	mfspr	r13,SPRG3		/* get paca address into r13 */
+	mfspr	r13,SPRN_SPRG3		/* get paca address into r13 */
+	std	r3,PACA_EXSLB+EX_R3(r13)
+	mfspr	r3,SPRN_DAR
 	std	r9,PACA_EXSLB+EX_R9(r13)	/* save r9 - r12 */
+	mfcr	r9
+#ifdef __DISABLED__
+	/* Keep that around for when we re-implement dynamic VSIDs */
+	cmpdi	r3,0
+	bge	slb_miss_user_pseries
+#endif /* __DISABLED__ */
 	std	r10,PACA_EXSLB+EX_R10(r13)
 	std	r11,PACA_EXSLB+EX_R11(r13)
 	std	r12,PACA_EXSLB+EX_R12(r13)
-	std	r3,PACA_EXSLB+EX_R3(r13)
-	mfspr	r9,SPRG1
-	std	r9,PACA_EXSLB+EX_R13(r13)
-	mfcr	r9
-	mfspr	r12,SRR1		/* and SRR1 */
-	mfspr	r3,DAR
-	b	.do_slb_miss		/* Rel. branch works in real mode */
+	mfspr	r10,SPRN_SPRG1
+	std	r10,PACA_EXSLB+EX_R13(r13)
+	mfspr	r12,SPRN_SRR1		/* and SRR1 */
+	b	.slb_miss_realmode	/* Rel. branch works in real mode */
 
 	STD_EXCEPTION_PSERIES(0x400, instruction_access)
 
@@ -436,20 +441,25 @@ data_access_slb_pSeries:
 	.globl instruction_access_slb_pSeries
 instruction_access_slb_pSeries:
 	HMT_MEDIUM
-	mtspr	SPRG1,r13
+	mtspr	SPRN_SPRG1,r13
 	RUNLATCH_ON(r13)
-	mfspr	r13,SPRG3		/* get paca address into r13 */
+	mfspr	r13,SPRN_SPRG3		/* get paca address into r13 */
+	std	r3,PACA_EXSLB+EX_R3(r13)
+	mfspr	r3,SPRN_SRR0		/* SRR0 is faulting address */
 	std	r9,PACA_EXSLB+EX_R9(r13)	/* save r9 - r12 */
+	mfcr	r9
+#ifdef __DISABLED__
+	/* Keep that around for when we re-implement dynamic VSIDs */
+	cmpdi	r3,0
+	bge	slb_miss_user_pseries
+#endif /* __DISABLED__ */
 	std	r10,PACA_EXSLB+EX_R10(r13)
 	std	r11,PACA_EXSLB+EX_R11(r13)
 	std	r12,PACA_EXSLB+EX_R12(r13)
-	std	r3,PACA_EXSLB+EX_R3(r13)
-	mfspr	r9,SPRG1
-	std	r9,PACA_EXSLB+EX_R13(r13)
-	mfcr	r9
-	mfspr	r12,SRR1		/* and SRR1 */
-	mfspr	r3,SRR0			/* SRR0 is faulting address */
-	b	.do_slb_miss		/* Rel. branch works in real mode */
+	mfspr	r10,SPRN_SPRG1
+	std	r10,PACA_EXSLB+EX_R13(r13)
+	mfspr	r12,SPRN_SRR1		/* and SRR1 */
+	b	.slb_miss_realmode	/* Rel. branch works in real mode */
 
 	STD_EXCEPTION_PSERIES(0x500, hardware_interrupt)
 	STD_EXCEPTION_PSERIES(0x600, alignment)
@@ -466,15 +476,15 @@ system_call_pSeries:
 	RUNLATCH_ON(r9)
 	mr	r9,r13
 	mfmsr	r10
-	mfspr	r13,SPRG3
-	mfspr	r11,SRR0
+	mfspr	r13,SPRN_SPRG3
+	mfspr	r11,SPRN_SRR0
 	clrrdi	r12,r13,32
 	oris	r12,r12,system_call_common@h
 	ori	r12,r12,system_call_common@l
-	mtspr	SRR0,r12
+	mtspr	SPRN_SRR0,r12
 	ori	r10,r10,MSR_IR|MSR_DR|MSR_RI
-	mfspr	r12,SRR1
-	mtspr	SRR1,r10
+	mfspr	r12,SPRN_SRR1
+	mtspr	SPRN_SRR1,r10
 	rfid
 	b	.	/* prevent speculative execution */
 
@@ -504,25 +514,57 @@ system_call_pSeries:
 	.align	7
 _GLOBAL(do_stab_bolted_pSeries)
 	mtcrf	0x80,r12
-	mfspr	r12,SPRG2
+	mfspr	r12,SPRN_SPRG2
 	EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted)
 
 /*
+ * We have some room here  we use that to put
+ * the peries slb miss user trampoline code so it's reasonably
+ * away from slb_miss_user_common to avoid problems with rfid
+ *
+ * This is used for when the SLB miss handler has to go virtual,
+ * which doesn't happen for now anymore but will once we re-implement
+ * dynamic VSIDs for shared page tables
+ */
+#ifdef __DISABLED__
+slb_miss_user_pseries:
+	std	r10,PACA_EXGEN+EX_R10(r13)
+	std	r11,PACA_EXGEN+EX_R11(r13)
+	std	r12,PACA_EXGEN+EX_R12(r13)
+	mfspr	r10,SPRG1
+	ld	r11,PACA_EXSLB+EX_R9(r13)
+	ld	r12,PACA_EXSLB+EX_R3(r13)
+	std	r10,PACA_EXGEN+EX_R13(r13)
+	std	r11,PACA_EXGEN+EX_R9(r13)
+	std	r12,PACA_EXGEN+EX_R3(r13)
+	clrrdi	r12,r13,32
+	mfmsr	r10
+	mfspr	r11,SRR0			/* save SRR0 */
+	ori	r12,r12,slb_miss_user_common@l	/* virt addr of handler */
+	ori	r10,r10,MSR_IR|MSR_DR|MSR_RI
+	mtspr	SRR0,r12
+	mfspr	r12,SRR1			/* and SRR1 */
+	mtspr	SRR1,r10
+	rfid
+	b	.				/* prevent spec. execution */
+#endif /* __DISABLED__ */
+
+/*
  * Vectors for the FWNMI option.  Share common code.
  */
-      .globl system_reset_fwnmi
+	.globl system_reset_fwnmi
 system_reset_fwnmi:
-      HMT_MEDIUM
-      mtspr   SPRG1,r13               /* save r13 */
-      RUNLATCH_ON(r13)
-      EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common)
+	HMT_MEDIUM
+	mtspr	SPRN_SPRG1,r13		/* save r13 */
+	RUNLATCH_ON(r13)
+	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common)
 
-      .globl machine_check_fwnmi
+	.globl machine_check_fwnmi
 machine_check_fwnmi:
-      HMT_MEDIUM
-      mtspr   SPRG1,r13               /* save r13 */
-      RUNLATCH_ON(r13)
-      EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
+	HMT_MEDIUM
+	mtspr	SPRN_SPRG1,r13		/* save r13 */
+	RUNLATCH_ON(r13)
+	EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
 
 #ifdef CONFIG_PPC_ISERIES
 /***  ISeries-LPAR interrupt handlers ***/
@@ -531,18 +573,18 @@ machine_check_fwnmi:
 
 	.globl data_access_iSeries
 data_access_iSeries:
-	mtspr	SPRG1,r13
+	mtspr	SPRN_SPRG1,r13
 BEGIN_FTR_SECTION
-	mtspr	SPRG2,r12
-	mfspr	r13,DAR
-	mfspr	r12,DSISR
+	mtspr	SPRN_SPRG2,r12
+	mfspr	r13,SPRN_DAR
+	mfspr	r12,SPRN_DSISR
 	srdi	r13,r13,60
 	rlwimi	r13,r12,16,0x20
 	mfcr	r12
 	cmpwi	r13,0x2c
 	beq	.do_stab_bolted_iSeries
 	mtcrf	0x80,r12
-	mfspr	r12,SPRG2
+	mfspr	r12,SPRN_SPRG2
 END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
 	EXCEPTION_PROLOG_ISERIES_1(PACA_EXGEN)
 	EXCEPTION_PROLOG_ISERIES_2
@@ -550,30 +592,67 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
 
 .do_stab_bolted_iSeries:
 	mtcrf	0x80,r12
-	mfspr	r12,SPRG2
+	mfspr	r12,SPRN_SPRG2
 	EXCEPTION_PROLOG_ISERIES_1(PACA_EXSLB)
 	EXCEPTION_PROLOG_ISERIES_2
 	b	.do_stab_bolted
 
 	.globl	data_access_slb_iSeries
 data_access_slb_iSeries:
-	mtspr	SPRG1,r13		/* save r13 */
-	EXCEPTION_PROLOG_ISERIES_1(PACA_EXSLB)
+	mtspr	SPRN_SPRG1,r13		/* save r13 */
+	mfspr	r13,SPRN_SPRG3		/* get paca address into r13 */
 	std	r3,PACA_EXSLB+EX_R3(r13)
-	ld	r12,PACALPPACA+LPPACASRR1(r13)
-	mfspr	r3,DAR
-	b	.do_slb_miss
+	mfspr	r3,SPRN_DAR
+	std	r9,PACA_EXSLB+EX_R9(r13)
+	mfcr	r9
+#ifdef __DISABLED__
+	cmpdi	r3,0
+	bge	slb_miss_user_iseries
+#endif
+	std	r10,PACA_EXSLB+EX_R10(r13)
+	std	r11,PACA_EXSLB+EX_R11(r13)
+	std	r12,PACA_EXSLB+EX_R12(r13)
+	mfspr	r10,SPRN_SPRG1
+	std	r10,PACA_EXSLB+EX_R13(r13)
+	ld	r12,PACALPPACA+LPPACASRR1(r13);
+	b	.slb_miss_realmode
 
 	STD_EXCEPTION_ISERIES(0x400, instruction_access, PACA_EXGEN)
 
 	.globl	instruction_access_slb_iSeries
 instruction_access_slb_iSeries:
-	mtspr	SPRG1,r13		/* save r13 */
-	EXCEPTION_PROLOG_ISERIES_1(PACA_EXSLB)
+	mtspr	SPRN_SPRG1,r13		/* save r13 */
+	mfspr	r13,SPRN_SPRG3		/* get paca address into r13 */
 	std	r3,PACA_EXSLB+EX_R3(r13)
-	ld	r12,PACALPPACA+LPPACASRR1(r13)
-	ld	r3,PACALPPACA+LPPACASRR0(r13)
-	b	.do_slb_miss
+	ld	r3,PACALPPACA+LPPACASRR0(r13)	/* get SRR0 value */
+	std	r9,PACA_EXSLB+EX_R9(r13)
+	mfcr	r9
+#ifdef __DISABLED__
+	cmpdi	r3,0
+	bge	.slb_miss_user_iseries
+#endif
+	std	r10,PACA_EXSLB+EX_R10(r13)
+	std	r11,PACA_EXSLB+EX_R11(r13)
+	std	r12,PACA_EXSLB+EX_R12(r13)
+	mfspr	r10,SPRN_SPRG1
+	std	r10,PACA_EXSLB+EX_R13(r13)
+	ld	r12,PACALPPACA+LPPACASRR1(r13);
+	b	.slb_miss_realmode
+
+#ifdef __DISABLED__
+slb_miss_user_iseries:
+	std	r10,PACA_EXGEN+EX_R10(r13)
+	std	r11,PACA_EXGEN+EX_R11(r13)
+	std	r12,PACA_EXGEN+EX_R12(r13)
+	mfspr	r10,SPRG1
+	ld	r11,PACA_EXSLB+EX_R9(r13)
+	ld	r12,PACA_EXSLB+EX_R3(r13)
+	std	r10,PACA_EXGEN+EX_R13(r13)
+	std	r11,PACA_EXGEN+EX_R9(r13)
+	std	r12,PACA_EXGEN+EX_R3(r13)
+	EXCEPTION_PROLOG_ISERIES_2
+	b	slb_miss_user_common
+#endif
 
 	MASKABLE_EXCEPTION_ISERIES(0x500, hardware_interrupt)
 	STD_EXCEPTION_ISERIES(0x600, alignment, PACA_EXGEN)
@@ -586,7 +665,7 @@ instruction_access_slb_iSeries:
 	.globl	system_call_iSeries
 system_call_iSeries:
 	mr	r9,r13
-	mfspr	r13,SPRG3
+	mfspr	r13,SPRN_SPRG3
 	EXCEPTION_PROLOG_ISERIES_2
 	b	system_call_common
 
@@ -596,7 +675,7 @@ system_call_iSeries:
 
 	.globl system_reset_iSeries
 system_reset_iSeries:
-	mfspr	r13,SPRG3		/* Get paca address */
+	mfspr	r13,SPRN_SPRG3		/* Get paca address */
 	mfmsr	r24
 	ori	r24,r24,MSR_RI
 	mtmsrd	r24			/* RI on */
@@ -639,7 +718,7 @@ iSeries_secondary_smp_loop:
 #endif /* CONFIG_SMP */
 	li	r0,-1			/* r0=-1 indicates a Hypervisor call */
 	sc				/* Invoke the hypervisor via a system call */
-	mfspr	r13,SPRG3		/* Put r13 back ???? */
+	mfspr	r13,SPRN_SPRG3		/* Put r13 back ???? */
 	b	1b			/* If SMP not configured, secondaries
 					 * loop forever */
 
@@ -656,8 +735,8 @@ hardware_interrupt_iSeries_masked:
 	mtcrf	0x80,r9		/* Restore regs */
 	ld	r11,PACALPPACA+LPPACASRR0(r13)
 	ld	r12,PACALPPACA+LPPACASRR1(r13)
-	mtspr	SRR0,r11
-	mtspr	SRR1,r12
+	mtspr	SPRN_SRR0,r11
+	mtspr	SPRN_SRR1,r12
 	ld	r9,PACA_EXGEN+EX_R9(r13)
 	ld	r10,PACA_EXGEN+EX_R10(r13)
 	ld	r11,PACA_EXGEN+EX_R11(r13)
@@ -713,8 +792,8 @@ bad_stack:
 	std	r10,GPR1(r1)
 	std	r11,_NIP(r1)
 	std	r12,_MSR(r1)
-	mfspr	r11,DAR
-	mfspr	r12,DSISR
+	mfspr	r11,SPRN_DAR
+	mfspr	r12,SPRN_DSISR
 	std	r11,_DAR(r1)
 	std	r12,_DSISR(r1)
 	mflr	r10
@@ -746,6 +825,7 @@ bad_stack:
  * any task or sent any task a signal, you should use
  * ret_from_except or ret_from_except_lite instead of this.
  */
+	.globl	fast_exception_return
 fast_exception_return:
 	ld	r12,_MSR(r1)
 	ld	r11,_NIP(r1)
@@ -766,8 +846,8 @@ fast_exception_return:
 	clrrdi	r10,r10,2		/* clear RI (LE is 0 already) */
 	mtmsrd	r10,1
 
-	mtspr	SRR1,r12
-	mtspr	SRR0,r11
+	mtspr	SPRN_SRR1,r12
+	mtspr	SPRN_SRR0,r11
 	REST_4GPRS(10, r1)
 	ld	r1,GPR1(r1)
 	rfid
@@ -788,9 +868,9 @@ unrecov_fer:
 	.globl data_access_common
 data_access_common:
 	RUNLATCH_ON(r10)		/* It wont fit in the 0x300 handler */
-	mfspr	r10,DAR
+	mfspr	r10,SPRN_DAR
 	std	r10,PACA_EXGEN+EX_DAR(r13)
-	mfspr	r10,DSISR
+	mfspr	r10,SPRN_DSISR
 	stw	r10,PACA_EXGEN+EX_DSISR(r13)
 	EXCEPTION_PROLOG_COMMON(0x300, PACA_EXGEN)
 	ld	r3,PACA_EXGEN+EX_DAR(r13)
@@ -807,6 +887,126 @@ instruction_access_common:
 	li	r5,0x400
 	b	.do_hash_page		/* Try to handle as hpte fault */
 
+/*
+ * Here is the common SLB miss user that is used when going to virtual
+ * mode for SLB misses, that is currently not used
+ */
+#ifdef __DISABLED__
+	.align	7
+	.globl	slb_miss_user_common
+slb_miss_user_common:
+	mflr	r10
+	std	r3,PACA_EXGEN+EX_DAR(r13)
+	stw	r9,PACA_EXGEN+EX_CCR(r13)
+	std	r10,PACA_EXGEN+EX_LR(r13)
+	std	r11,PACA_EXGEN+EX_SRR0(r13)
+	bl	.slb_allocate_user
+
+	ld	r10,PACA_EXGEN+EX_LR(r13)
+	ld	r3,PACA_EXGEN+EX_R3(r13)
+	lwz	r9,PACA_EXGEN+EX_CCR(r13)
+	ld	r11,PACA_EXGEN+EX_SRR0(r13)
+	mtlr	r10
+	beq-	slb_miss_fault
+
+	andi.	r10,r12,MSR_RI		/* check for unrecoverable exception */
+	beq-	unrecov_user_slb
+	mfmsr	r10
+
+.machine push
+.machine "power4"
+	mtcrf	0x80,r9
+.machine pop
+
+	clrrdi	r10,r10,2		/* clear RI before setting SRR0/1 */
+	mtmsrd	r10,1
+
+	mtspr	SRR0,r11
+	mtspr	SRR1,r12
+
+	ld	r9,PACA_EXGEN+EX_R9(r13)
+	ld	r10,PACA_EXGEN+EX_R10(r13)
+	ld	r11,PACA_EXGEN+EX_R11(r13)
+	ld	r12,PACA_EXGEN+EX_R12(r13)
+	ld	r13,PACA_EXGEN+EX_R13(r13)
+	rfid
+	b	.
+
+slb_miss_fault:
+	EXCEPTION_PROLOG_COMMON(0x380, PACA_EXGEN)
+	ld	r4,PACA_EXGEN+EX_DAR(r13)
+	li	r5,0
+	std	r4,_DAR(r1)
+	std	r5,_DSISR(r1)
+	b	.handle_page_fault
+
+unrecov_user_slb:
+	EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN)
+	DISABLE_INTS
+	bl	.save_nvgprs
+1:	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	.unrecoverable_exception
+	b	1b
+
+#endif /* __DISABLED__ */
+
+
+/*
+ * r13 points to the PACA, r9 contains the saved CR,
+ * r12 contain the saved SRR1, SRR0 is still ready for return
+ * r3 has the faulting address
+ * r9 - r13 are saved in paca->exslb.
+ * r3 is saved in paca->slb_r3
+ * We assume we aren't going to take any exceptions during this procedure.
+ */
+_GLOBAL(slb_miss_realmode)
+	mflr	r10
+
+	stw	r9,PACA_EXSLB+EX_CCR(r13)	/* save CR in exc. frame */
+	std	r10,PACA_EXSLB+EX_LR(r13)	/* save LR */
+
+	bl	.slb_allocate_realmode
+
+	/* All done -- return from exception. */
+
+	ld	r10,PACA_EXSLB+EX_LR(r13)
+	ld	r3,PACA_EXSLB+EX_R3(r13)
+	lwz	r9,PACA_EXSLB+EX_CCR(r13)	/* get saved CR */
+#ifdef CONFIG_PPC_ISERIES
+	ld	r11,PACALPPACA+LPPACASRR0(r13)	/* get SRR0 value */
+#endif /* CONFIG_PPC_ISERIES */
+
+	mtlr	r10
+
+	andi.	r10,r12,MSR_RI	/* check for unrecoverable exception */
+	beq-	unrecov_slb
+
+.machine	push
+.machine	"power4"
+	mtcrf	0x80,r9
+	mtcrf	0x01,r9		/* slb_allocate uses cr0 and cr7 */
+.machine	pop
+
+#ifdef CONFIG_PPC_ISERIES
+	mtspr	SPRN_SRR0,r11
+	mtspr	SPRN_SRR1,r12
+#endif /* CONFIG_PPC_ISERIES */
+	ld	r9,PACA_EXSLB+EX_R9(r13)
+	ld	r10,PACA_EXSLB+EX_R10(r13)
+	ld	r11,PACA_EXSLB+EX_R11(r13)
+	ld	r12,PACA_EXSLB+EX_R12(r13)
+	ld	r13,PACA_EXSLB+EX_R13(r13)
+	rfid
+	b	.	/* prevent speculative execution */
+
+unrecov_slb:
+	EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
+	DISABLE_INTS
+	bl	.save_nvgprs
+1:	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	.unrecoverable_exception
+	b	1b
+
 	.align	7
 	.globl hardware_interrupt_common
 	.globl hardware_interrupt_entry
@@ -821,9 +1021,9 @@ hardware_interrupt_entry:
 	.align	7
 	.globl alignment_common
 alignment_common:
-	mfspr	r10,DAR
+	mfspr	r10,SPRN_DAR
 	std	r10,PACA_EXGEN+EX_DAR(r13)
-	mfspr	r10,DSISR
+	mfspr	r10,SPRN_DSISR
 	stw	r10,PACA_EXGEN+EX_DSISR(r13)
 	EXCEPTION_PROLOG_COMMON(0x600, PACA_EXGEN)
 	ld	r3,PACA_EXGEN+EX_DAR(r13)
@@ -857,62 +1057,6 @@ fp_unavailable_common:
 	bl	.kernel_fp_unavailable_exception
 	BUG_OPCODE
 
-/*
- * load_up_fpu(unused, unused, tsk)
- * Disable FP for the task which had the FPU previously,
- * and save its floating-point registers in its thread_struct.
- * Enables the FPU for use in the kernel on return.
- * On SMP we know the fpu is free, since we give it up every
- * switch (ie, no lazy save of the FP registers).
- * On entry: r13 == 'current' && last_task_used_math != 'current'
- */
-_STATIC(load_up_fpu)
-	mfmsr	r5			/* grab the current MSR */
-	ori	r5,r5,MSR_FP
-	mtmsrd	r5			/* enable use of fpu now */
-	isync
-/*
- * For SMP, we don't do lazy FPU switching because it just gets too
- * horrendously complex, especially when a task switches from one CPU
- * to another.  Instead we call giveup_fpu in switch_to.
- *
- */
-#ifndef CONFIG_SMP
-	ld	r3,last_task_used_math@got(r2)
-	ld	r4,0(r3)
-	cmpdi	0,r4,0
-	beq	1f
-	/* Save FP state to last_task_used_math's THREAD struct */
-	addi	r4,r4,THREAD
-	SAVE_32FPRS(0, r4)
-	mffs	fr0
-	stfd	fr0,THREAD_FPSCR(r4)
-	/* Disable FP for last_task_used_math */
-	ld	r5,PT_REGS(r4)
-	ld	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	li	r6,MSR_FP|MSR_FE0|MSR_FE1
-	andc	r4,r4,r6
-	std	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#endif /* CONFIG_SMP */
-	/* enable use of FP after return */
-	ld	r4,PACACURRENT(r13)
-	addi	r5,r4,THREAD		/* Get THREAD */
-	ld	r4,THREAD_FPEXC_MODE(r5)
-	ori	r12,r12,MSR_FP
-	or	r12,r12,r4
-	std	r12,_MSR(r1)
-	lfd	fr0,THREAD_FPSCR(r5)
-	mtfsf	0xff,fr0
-	REST_32FPRS(0, r5)
-#ifndef CONFIG_SMP
-	/* Update last_task_used_math to 'current' */
-	subi	r4,r5,THREAD		/* Back to 'current' */
-	std	r4,0(r3)
-#endif /* CONFIG_SMP */
-	/* restore registers and return */
-	b	fast_exception_return
-
 	.align	7
 	.globl altivec_unavailable_common
 altivec_unavailable_common:
@@ -1120,7 +1264,7 @@ _GLOBAL(do_stab_bolted)
 
 	/* Hash to the primary group */
 	ld	r10,PACASTABVIRT(r13)
-	mfspr	r11,DAR
+	mfspr	r11,SPRN_DAR
 	srdi	r11,r11,28
 	rldimi	r10,r11,7,52	/* r10 = first ste of the group */
 
@@ -1162,7 +1306,7 @@ _GLOBAL(do_stab_bolted)
 2:	std	r9,8(r10)	/* Store the vsid part of the ste	*/
 	eieio
 
-	mfspr	r11,DAR		/* Get the new esid			*/
+	mfspr	r11,SPRN_DAR		/* Get the new esid			*/
 	clrrdi	r11,r11,28	/* Permits a full 32b of ESID		*/
 	ori	r11,r11,0x90	/* Turn on valid and kp			*/
 	std	r11,0(r10)	/* Put new entry back into the stab	*/
@@ -1182,8 +1326,8 @@ _GLOBAL(do_stab_bolted)
 	clrrdi	r10,r10,2
 	mtmsrd	r10,1
 
-	mtspr	SRR0,r11
-	mtspr	SRR1,r12
+	mtspr	SPRN_SRR0,r11
+	mtspr	SPRN_SRR1,r12
 	ld	r9,PACA_EXSLB+EX_R9(r13)
 	ld	r10,PACA_EXSLB+EX_R10(r13)
 	ld	r11,PACA_EXSLB+EX_R11(r13)
@@ -1193,67 +1337,11 @@ _GLOBAL(do_stab_bolted)
 	b	.	/* prevent speculative execution */
 
 /*
- * r13 points to the PACA, r9 contains the saved CR,
- * r11 and r12 contain the saved SRR0 and SRR1.
- * r3 has the faulting address
- * r9 - r13 are saved in paca->exslb.
- * r3 is saved in paca->slb_r3
- * We assume we aren't going to take any exceptions during this procedure.
- */
-_GLOBAL(do_slb_miss)
-	mflr	r10
-
-	stw	r9,PACA_EXSLB+EX_CCR(r13)	/* save CR in exc. frame */
-	std	r10,PACA_EXSLB+EX_LR(r13)	/* save LR */
-
-	bl	.slb_allocate			/* handle it */
-
-	/* All done -- return from exception. */
-
-	ld	r10,PACA_EXSLB+EX_LR(r13)
-	ld	r3,PACA_EXSLB+EX_R3(r13)
-	lwz	r9,PACA_EXSLB+EX_CCR(r13)	/* get saved CR */
-#ifdef CONFIG_PPC_ISERIES
-	ld	r11,PACALPPACA+LPPACASRR0(r13)	/* get SRR0 value */
-#endif /* CONFIG_PPC_ISERIES */
-
-	mtlr	r10
-
-	andi.	r10,r12,MSR_RI	/* check for unrecoverable exception */
-	beq-	unrecov_slb
-
-.machine	push
-.machine	"power4"
-	mtcrf	0x80,r9
-	mtcrf	0x01,r9		/* slb_allocate uses cr0 and cr7 */
-.machine	pop
-
-#ifdef CONFIG_PPC_ISERIES
-	mtspr	SRR0,r11
-	mtspr	SRR1,r12
-#endif /* CONFIG_PPC_ISERIES */
-	ld	r9,PACA_EXSLB+EX_R9(r13)
-	ld	r10,PACA_EXSLB+EX_R10(r13)
-	ld	r11,PACA_EXSLB+EX_R11(r13)
-	ld	r12,PACA_EXSLB+EX_R12(r13)
-	ld	r13,PACA_EXSLB+EX_R13(r13)
-	rfid
-	b	.	/* prevent speculative execution */
-
-unrecov_slb:
-	EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
-	DISABLE_INTS
-	bl	.save_nvgprs
-1:	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.unrecoverable_exception
-	b	1b
-
-/*
  * Space for CPU0's segment table.
  *
  * On iSeries, the hypervisor must fill in at least one entry before
  * we get control (with relocate on).  The address is give to the hv
- * as a page number (see xLparMap in LparData.c), so this must be at a
+ * as a page number (see xLparMap in lpardata.c), so this must be at a
  * fixed address (the linker can't compute (u64)&initial_stab >>
  * PAGE_SHIFT).
  */
@@ -1316,7 +1404,7 @@ _GLOBAL(pSeries_secondary_smp_init)
 	mr	r3,r24			/* not found, copy phys to r3	 */
 	b	.kexec_wait		/* next kernel might do better	 */
 
-2:	mtspr	SPRG3,r13		/* Save vaddr of paca in SPRG3	 */
+2:	mtspr	SPRN_SPRG3,r13		/* Save vaddr of paca in SPRG3	 */
 	/* From now on, r24 is expected to be logical cpuid */
 	mr	r24,r5
 3:	HMT_LOW
@@ -1364,6 +1452,7 @@ _STATIC(__start_initialization_iSeries)
 	addi	r2,r2,0x4000
 
 	bl	.iSeries_early_setup
+	bl	.early_setup
 
 	/* relocation is on at this point */
 
@@ -1440,7 +1529,7 @@ _STATIC(__boot_from_prom)
 	addi	r2,r2,0x4000
 
 	/* Relocate the TOC from a virt addr to a real addr */
-	sub	r2,r2,r3
+	add	r2,r2,r3
 
 	/* Restore parameters */
 	mr	r3,r31
@@ -1479,7 +1568,7 @@ _STATIC(__after_prom_start)
 	li	r3,0			/* target addr */
 
 	// XXX FIXME: Use phys returned by OF (r30)
-	sub	r4,r27,r26 		/* source addr			 */
+	add	r4,r27,r26 		/* source addr			 */
 					/* current address of _start	 */
 					/*   i.e. where we are running	 */
 					/*	the source addr		 */
@@ -1499,7 +1588,7 @@ _STATIC(__after_prom_start)
 	bctr
 
 4:	LOADADDR(r5,klimit)
-	sub	r5,r5,r26
+	add	r5,r5,r26
 	ld	r5,0(r5)		/* get the value of klimit */
 	sub	r5,r5,r27
 	bl	.copy_and_flush		/* copy the rest */
@@ -1554,20 +1643,17 @@ copy_to_here:
 	.section ".text";
 	.align 2 ;
 
-	.globl	pmac_secondary_start_1	
-pmac_secondary_start_1:	
-	li	r24, 1
-	b	.pmac_secondary_start
-	
-	.globl pmac_secondary_start_2
-pmac_secondary_start_2:	
-	li	r24, 2
-	b	.pmac_secondary_start
-	
-	.globl pmac_secondary_start_3
-pmac_secondary_start_3:
-	li	r24, 3
-	b	.pmac_secondary_start
+	.globl	__secondary_start_pmac_0
+__secondary_start_pmac_0:
+	/* NB the entries for cpus 0, 1, 2 must each occupy 8 bytes. */
+	li	r24,0
+	b	1f
+	li	r24,1
+	b	1f
+	li	r24,2
+	b	1f
+	li	r24,3
+1:
 	
 _GLOBAL(pmac_secondary_start)
 	/* turn on 64-bit mode */
@@ -1586,7 +1672,7 @@ _GLOBAL(pmac_secondary_start)
 	LOADADDR(r4, paca) 		 /* Get base vaddr of paca array	*/
 	mulli	r13,r24,PACA_SIZE	 /* Calculate vaddr of right paca */
 	add	r13,r13,r4		/* for this processor.		*/
-	mtspr	SPRG3,r13		 /* Save vaddr of paca in SPRG3	*/
+	mtspr	SPRN_SPRG3,r13		 /* Save vaddr of paca in SPRG3	*/
 
 	/* Create a temp kernel stack for use before relocation is on.	*/
 	ld	r1,PACAEMERGSP(r13)
@@ -1610,22 +1696,14 @@ _GLOBAL(pmac_secondary_start)
  *   SPRG3 = paca virtual address
  */
 _GLOBAL(__secondary_start)
+	/* Set thread priority to MEDIUM */
+	HMT_MEDIUM
 
-	HMT_MEDIUM			/* Set thread priority to MEDIUM */
-
+	/* Load TOC */
 	ld	r2,PACATOC(r13)
-	li	r6,0
-	stb	r6,PACAPROCENABLED(r13)
-
-#ifndef CONFIG_PPC_ISERIES
-	/* Initialize the page table pointer register. */
-	LOADADDR(r6,_SDR1)
-	ld	r6,0(r6)		/* get the value of _SDR1	 */
-	mtspr	SDR1,r6			/* set the htab location	 */
-#endif
-	/* Initialize the first segment table (or SLB) entry		 */
-	ld	r3,PACASTABVIRT(r13)	/* get addr of segment table	 */
-	bl	.stab_initialize
+
+	/* Do early setup for that CPU (stab, slb, hash table pointer) */
+	bl	.early_setup_secondary
 
 	/* Initialize the kernel stack.  Just a repeat for iSeries.	 */
 	LOADADDR(r3,current_set)
@@ -1634,37 +1712,7 @@ _GLOBAL(__secondary_start)
 	addi	r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
 	std	r1,PACAKSAVE(r13)
 
-	ld	r3,PACASTABREAL(r13)	/* get raddr of segment table	 */
-	ori	r4,r3,1			/* turn on valid bit		 */
-
-#ifdef CONFIG_PPC_ISERIES
-	li	r0,-1			/* hypervisor call */
-	li	r3,1
-	sldi	r3,r3,63		/* 0x8000000000000000 */
-	ori	r3,r3,4			/* 0x8000000000000004 */
-	sc				/* HvCall_setASR */
-#else
-	/* set the ASR */
-	ld	r3,systemcfg@got(r2)	/* r3 = ptr to systemcfg	 */
-	ld	r3,0(r3)
-	lwz	r3,PLATFORM(r3)		/* r3 = platform flags		 */
-	andi.	r3,r3,PLATFORM_LPAR	/* Test if bit 0 is set (LPAR bit) */
-	beq	98f			/* branch if result is 0  */
-	mfspr	r3,PVR
-	srwi	r3,r3,16
-	cmpwi	r3,0x37			/* SStar  */
-	beq	97f
-	cmpwi	r3,0x36			/* IStar  */
-	beq	97f
-	cmpwi	r3,0x34			/* Pulsar */
-	bne	98f
-97:	li	r3,H_SET_ASR		/* hcall = H_SET_ASR */
-	HVSC				/* Invoking hcall */
-	b	99f
-98:					/* !(rpa hypervisor) || !(star)  */
-	mtasr	r4			/* set the stab location	 */
-99:
-#endif
+	/* Clear backchain so we get nice backtraces */
 	li	r7,0
 	mtlr	r7
 
@@ -1674,8 +1722,8 @@ _GLOBAL(__secondary_start)
 #ifdef DO_SOFT_DISABLE
 	ori	r4,r4,MSR_EE
 #endif
-	mtspr	SRR0,r3
-	mtspr	SRR1,r4
+	mtspr	SPRN_SRR0,r3
+	mtspr	SPRN_SRR1,r4
 	rfid
 	b	.	/* prevent speculative execution */
 
@@ -1687,6 +1735,7 @@ _GLOBAL(start_secondary_prolog)
 	li	r3,0
 	std	r3,0(r1)		/* Zero the stack frame pointer	*/
 	bl	.start_secondary
+	b	.
 #endif
 
 /*
@@ -1737,7 +1786,7 @@ _STATIC(start_here_multiplatform)
 
 #ifdef CONFIG_HMT
 	/* Start up the second thread on cpu 0 */
-	mfspr	r3,PVR
+	mfspr	r3,SPRN_PVR
 	srwi	r3,r3,16
 	cmpwi	r3,0x34			/* Pulsar  */
 	beq	90f
@@ -1758,7 +1807,7 @@ _STATIC(start_here_multiplatform)
 	/* kernel but are still running in real mode. */
 
 	LOADADDR(r3,init_thread_union)
-	sub	r3,r3,r26
+	add	r3,r3,r26
 
 	/* set up a stack pointer (physical address) */
 	addi	r1,r3,THREAD_SIZE
@@ -1769,12 +1818,12 @@ _STATIC(start_here_multiplatform)
 	LOADADDR(r2,__toc_start)
 	addi	r2,r2,0x4000
 	addi	r2,r2,0x4000
-	sub	r2,r2,r26
+	add	r2,r2,r26
 
 	LOADADDR(r3,cpu_specs)
-	sub	r3,r3,r26
+	add	r3,r3,r26
 	LOADADDR(r4,cur_cpu_spec)
-	sub	r4,r4,r26
+	add	r4,r4,r26
 	mr	r5,r26
 	bl	.identify_cpu
 
@@ -1790,14 +1839,14 @@ _STATIC(start_here_multiplatform)
 	 * code
 	 */
 	LOADADDR(r27, boot_cpuid)
-	sub	r27,r27,r26
+	add	r27,r27,r26
 	lwz	r27,0(r27)
 
 	LOADADDR(r24, paca) 		/* Get base vaddr of paca array	 */
 	mulli	r13,r27,PACA_SIZE	/* Calculate vaddr of right paca */
 	add	r13,r13,r24		/* for this processor.		 */
-	sub	r13,r13,r26		/* convert to physical addr	 */
-	mtspr	SPRG3,r13		/* PPPBBB: Temp... -Peter */
+	add	r13,r13,r26		/* convert to physical addr	 */
+	mtspr	SPRN_SPRG3,r13		/* PPPBBB: Temp... -Peter */
 	
 	/* Do very early kernel initializations, including initial hash table,
 	 * stab and slb setup before we turn on relocation.	*/
@@ -1806,44 +1855,10 @@ _STATIC(start_here_multiplatform)
 	mr	r3,r31
  	bl	.early_setup
 
-	/* set the ASR */
-	ld	r3,PACASTABREAL(r13)
-	ori	r4,r3,1			/* turn on valid bit		 */
-	ld	r3,systemcfg@got(r2)	/* r3 = ptr to systemcfg */
-	ld	r3,0(r3)
-	lwz	r3,PLATFORM(r3)		/* r3 = platform flags */
-	andi.	r3,r3,PLATFORM_LPAR	/* Test if bit 0 is set (LPAR bit) */
-	beq	98f			/* branch if result is 0  */
-	mfspr	r3,PVR
-	srwi	r3,r3,16
-	cmpwi	r3,0x37			/* SStar */
-	beq	97f
-	cmpwi	r3,0x36			/* IStar  */
-	beq	97f
-	cmpwi	r3,0x34			/* Pulsar */
-	bne	98f
-97:	li	r3,H_SET_ASR		/* hcall = H_SET_ASR */
-	HVSC				/* Invoking hcall */
-	b	99f
-98:					/* !(rpa hypervisor) || !(star) */
-	mtasr	r4			/* set the stab location	*/
-99:
-	/* Set SDR1 (hash table pointer) */
-	ld	r3,systemcfg@got(r2)	/* r3 = ptr to systemcfg */
-	ld	r3,0(r3)
-	lwz	r3,PLATFORM(r3)		/* r3 = platform flags */
-	/* Test if bit 0 is set (LPAR bit) */
-	andi.	r3,r3,PLATFORM_LPAR
-	bne	98f			/* branch if result is !0  */
-	LOADADDR(r6,_SDR1)		/* Only if NOT LPAR */
-	sub	r6,r6,r26
-	ld	r6,0(r6)		/* get the value of _SDR1 */
-	mtspr	SDR1,r6			/* set the htab location  */
-98: 
 	LOADADDR(r3,.start_here_common)
 	SET_REG_TO_CONST(r4, MSR_KERNEL)
-	mtspr	SRR0,r3
-	mtspr	SRR1,r4
+	mtspr	SPRN_SRR0,r3
+	mtspr	SPRN_SRR1,r4
 	rfid
 	b	.	/* prevent speculative execution */
 #endif /* CONFIG_PPC_MULTIPLATFORM */
@@ -1874,7 +1889,7 @@ _STATIC(start_here_common)
 	LOADADDR(r24, paca) 		/* Get base vaddr of paca array  */
 	mulli	r13,r26,PACA_SIZE	/* Calculate vaddr of right paca */
 	add	r13,r13,r24		/* for this processor.		 */
-	mtspr	SPRG3,r13
+	mtspr	SPRN_SPRG3,r13
 
 	/* ptr to current */
 	LOADADDR(r4,init_task)
@@ -1901,7 +1916,7 @@ _STATIC(start_here_common)
 _GLOBAL(hmt_init)
 #ifdef CONFIG_HMT
 	LOADADDR(r5, hmt_thread_data)
-	mfspr	r7,PVR
+	mfspr	r7,SPRN_PVR
 	srwi	r7,r7,16
 	cmpwi	r7,0x34			/* Pulsar  */
 	beq	90f
@@ -1910,10 +1925,10 @@ _GLOBAL(hmt_init)
 	cmpwi	r7,0x37			/* SStar   */
 	beq	91f
 	b	101f
-90:	mfspr	r6,PIR
+90:	mfspr	r6,SPRN_PIR
 	andi.	r6,r6,0x1f
 	b	92f
-91:	mfspr	r6,PIR
+91:	mfspr	r6,SPRN_PIR
 	andi.	r6,r6,0x3ff
 92:	sldi	r4,r24,3
 	stwx	r6,r5,r4
@@ -1924,8 +1939,8 @@ __hmt_secondary_hold:
 	LOADADDR(r5, hmt_thread_data)
 	clrldi	r5,r5,4
 	li	r7,0
-	mfspr	r6,PIR
-	mfspr	r8,PVR
+	mfspr	r6,SPRN_PIR
+	mfspr	r8,SPRN_PVR
 	srwi	r8,r8,16
 	cmpwi	r8,0x34
 	bne	93f
@@ -1951,48 +1966,32 @@ __hmt_secondary_hold:
 _GLOBAL(hmt_start_secondary)
 	LOADADDR(r4,__hmt_secondary_hold)
 	clrldi	r4,r4,4
-	mtspr	NIADORM, r4
-	mfspr	r4, MSRDORM
+	mtspr	SPRN_NIADORM, r4
+	mfspr	r4, SPRN_MSRDORM
 	li	r5, -65
 	and	r4, r4, r5
-	mtspr	MSRDORM, r4
+	mtspr	SPRN_MSRDORM, r4
 	lis	r4,0xffef
 	ori	r4,r4,0x7403
-	mtspr	TSC, r4
+	mtspr	SPRN_TSC, r4
 	li	r4,0x1f4
-	mtspr	TST, r4
-	mfspr	r4, HID0
+	mtspr	SPRN_TST, r4
+	mfspr	r4, SPRN_HID0
 	ori	r4, r4, 0x1
-	mtspr	HID0, r4
+	mtspr	SPRN_HID0, r4
 	mfspr	r4, SPRN_CTRLF
 	oris	r4, r4, 0x40
 	mtspr	SPRN_CTRLT, r4
 	blr
 #endif
 
-#if defined(CONFIG_KEXEC) || (defined(CONFIG_SMP) && !defined(CONFIG_PPC_ISERIES))
-_GLOBAL(smp_release_cpus)
-	/* All secondary cpus are spinning on a common
-	 * spinloop, release them all now so they can start
-	 * to spin on their individual paca spinloops.
-	 * For non SMP kernels, the secondary cpus never
-	 * get out of the common spinloop.
-	 */
-	li	r3,1
-	LOADADDR(r5,__secondary_hold_spinloop)
-	std	r3,0(r5)
-	sync
-	blr
-#endif /* CONFIG_SMP && !CONFIG_PPC_ISERIES */
-
-
 /*
  * We put a few things here that have to be page-aligned.
  * This stuff goes at the beginning of the bss, which is page-aligned.
  */
 	.section ".bss"
 
-	.align	12
+	.align	PAGE_SHIFT
 
 	.globl	empty_zero_page
 empty_zero_page:
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
new file mode 100644
index 000000000000..bc6d1ac55235
--- /dev/null
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -0,0 +1,860 @@
+/*
+ *  arch/ppc/kernel/except_8xx.S
+ *
+ *  PowerPC version
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *  Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
+ *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
+ *  Low-level exception handlers and MMU support
+ *  rewritten by Paul Mackerras.
+ *    Copyright (C) 1996 Paul Mackerras.
+ *  MPC8xx modifications by Dan Malek
+ *    Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
+ *
+ *  This file contains low-level support and setup for PowerPC 8xx
+ *  embedded processors, including trap and interrupt dispatch.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/cache.h>
+#include <asm/pgtable.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+
+/* Macro to make the code more readable. */
+#ifdef CONFIG_8xx_CPU6
+#define DO_8xx_CPU6(val, reg)	\
+	li	reg, val;	\
+	stw	reg, 12(r0);	\
+	lwz	reg, 12(r0);
+#else
+#define DO_8xx_CPU6(val, reg)
+#endif
+	.text
+	.globl	_stext
+_stext:
+	.text
+	.globl	_start
+_start:
+
+/* MPC8xx
+ * This port was done on an MBX board with an 860.  Right now I only
+ * support an ELF compressed (zImage) boot from EPPC-Bug because the
+ * code there loads up some registers before calling us:
+ *   r3: ptr to board info data
+ *   r4: initrd_start or if no initrd then 0
+ *   r5: initrd_end - unused if r4 is 0
+ *   r6: Start of command line string
+ *   r7: End of command line string
+ *
+ * I decided to use conditional compilation instead of checking PVR and
+ * adding more processor specific branches around code I don't need.
+ * Since this is an embedded processor, I also appreciate any memory
+ * savings I can get.
+ *
+ * The MPC8xx does not have any BATs, but it supports large page sizes.
+ * We first initialize the MMU to support 8M byte pages, then load one
+ * entry into each of the instruction and data TLBs to map the first
+ * 8M 1:1.  I also mapped an additional I/O space 1:1 so we can get to
+ * the "internal" processor registers before MMU_init is called.
+ *
+ * The TLB code currently contains a major hack.  Since I use the condition
+ * code register, I have to save and restore it.  I am out of registers, so
+ * I just store it in memory location 0 (the TLB handlers are not reentrant).
+ * To avoid making any decisions, I need to use the "segment" valid bit
+ * in the first level table, but that would require many changes to the
+ * Linux page directory/table functions that I don't want to do right now.
+ *
+ * I used to use SPRG2 for a temporary register in the TLB handler, but it
+ * has since been put to other uses.  I now use a hack to save a register
+ * and the CCR at memory location 0.....Someday I'll fix this.....
+ *	-- Dan
+ */
+	.globl	__start
+__start:
+	mr	r31,r3			/* save parameters */
+	mr	r30,r4
+	mr	r29,r5
+	mr	r28,r6
+	mr	r27,r7
+
+	/* We have to turn on the MMU right away so we get cache modes
+	 * set correctly.
+	 */
+	bl	initial_mmu
+
+/* We now have the lower 8 Meg mapped into TLB entries, and the caches
+ * ready to work.
+ */
+
+turn_on_mmu:
+	mfmsr	r0
+	ori	r0,r0,MSR_DR|MSR_IR
+	mtspr	SPRN_SRR1,r0
+	lis	r0,start_here@h
+	ori	r0,r0,start_here@l
+	mtspr	SPRN_SRR0,r0
+	SYNC
+	rfi				/* enables MMU */
+
+/*
+ * Exception entry code.  This code runs with address translation
+ * turned off, i.e. using physical addresses.
+ * We assume sprg3 has the physical address of the current
+ * task's thread_struct.
+ */
+#define EXCEPTION_PROLOG	\
+	mtspr	SPRN_SPRG0,r10;	\
+	mtspr	SPRN_SPRG1,r11;	\
+	mfcr	r10;		\
+	EXCEPTION_PROLOG_1;	\
+	EXCEPTION_PROLOG_2
+
+#define EXCEPTION_PROLOG_1	\
+	mfspr	r11,SPRN_SRR1;		/* check whether user or kernel */ \
+	andi.	r11,r11,MSR_PR;	\
+	tophys(r11,r1);			/* use tophys(r1) if kernel */ \
+	beq	1f;		\
+	mfspr	r11,SPRN_SPRG3;	\
+	lwz	r11,THREAD_INFO-THREAD(r11);	\
+	addi	r11,r11,THREAD_SIZE;	\
+	tophys(r11,r11);	\
+1:	subi	r11,r11,INT_FRAME_SIZE	/* alloc exc. frame */
+
+
+#define EXCEPTION_PROLOG_2	\
+	CLR_TOP32(r11);		\
+	stw	r10,_CCR(r11);		/* save registers */ \
+	stw	r12,GPR12(r11);	\
+	stw	r9,GPR9(r11);	\
+	mfspr	r10,SPRN_SPRG0;	\
+	stw	r10,GPR10(r11);	\
+	mfspr	r12,SPRN_SPRG1;	\
+	stw	r12,GPR11(r11);	\
+	mflr	r10;		\
+	stw	r10,_LINK(r11);	\
+	mfspr	r12,SPRN_SRR0;	\
+	mfspr	r9,SPRN_SRR1;	\
+	stw	r1,GPR1(r11);	\
+	stw	r1,0(r11);	\
+	tovirt(r1,r11);			/* set new kernel sp */	\
+	li	r10,MSR_KERNEL & ~(MSR_IR|MSR_DR); /* can take exceptions */ \
+	MTMSRD(r10);			/* (except for mach check in rtas) */ \
+	stw	r0,GPR0(r11);	\
+	SAVE_4GPRS(3, r11);	\
+	SAVE_2GPRS(7, r11)
+
+/*
+ * Note: code which follows this uses cr0.eq (set if from kernel),
+ * r11, r12 (SRR0), and r9 (SRR1).
+ *
+ * Note2: once we have set r1 we are in a position to take exceptions
+ * again, and we could thus set MSR:RI at that point.
+ */
+
+/*
+ * Exception vectors.
+ */
+#define EXCEPTION(n, label, hdlr, xfer)		\
+	. = n;					\
+label:						\
+	EXCEPTION_PROLOG;			\
+	addi	r3,r1,STACK_FRAME_OVERHEAD;	\
+	xfer(n, hdlr)
+
+#define EXC_XFER_TEMPLATE(n, hdlr, trap, copyee, tfer, ret)	\
+	li	r10,trap;					\
+	stw	r10,_TRAP(r11);					\
+	li	r10,MSR_KERNEL;					\
+	copyee(r10, r9);					\
+	bl	tfer;						\
+i##n:								\
+	.long	hdlr;						\
+	.long	ret
+
+#define COPY_EE(d, s)		rlwimi d,s,0,16,16
+#define NOCOPY(d, s)
+
+#define EXC_XFER_STD(n, hdlr)		\
+	EXC_XFER_TEMPLATE(n, hdlr, n, NOCOPY, transfer_to_handler_full,	\
+			  ret_from_except_full)
+
+#define EXC_XFER_LITE(n, hdlr)		\
+	EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \
+			  ret_from_except)
+
+#define EXC_XFER_EE(n, hdlr)		\
+	EXC_XFER_TEMPLATE(n, hdlr, n, COPY_EE, transfer_to_handler_full, \
+			  ret_from_except_full)
+
+#define EXC_XFER_EE_LITE(n, hdlr)	\
+	EXC_XFER_TEMPLATE(n, hdlr, n+1, COPY_EE, transfer_to_handler, \
+			  ret_from_except)
+
+/* System reset */
+	EXCEPTION(0x100, Reset, unknown_exception, EXC_XFER_STD)
+
+/* Machine check */
+	. = 0x200
+MachineCheck:
+	EXCEPTION_PROLOG
+	mfspr r4,SPRN_DAR
+	stw r4,_DAR(r11)
+	mfspr r5,SPRN_DSISR
+	stw r5,_DSISR(r11)
+	addi r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_STD(0x200, machine_check_exception)
+
+/* Data access exception.
+ * This is "never generated" by the MPC8xx.  We jump to it for other
+ * translation errors.
+ */
+	. = 0x300
+DataAccess:
+	EXCEPTION_PROLOG
+	mfspr	r10,SPRN_DSISR
+	stw	r10,_DSISR(r11)
+	mr	r5,r10
+	mfspr	r4,SPRN_DAR
+	EXC_XFER_EE_LITE(0x300, handle_page_fault)
+
+/* Instruction access exception.
+ * This is "never generated" by the MPC8xx.  We jump to it for other
+ * translation errors.
+ */
+	. = 0x400
+InstructionAccess:
+	EXCEPTION_PROLOG
+	mr	r4,r12
+	mr	r5,r9
+	EXC_XFER_EE_LITE(0x400, handle_page_fault)
+
+/* External interrupt */
+	EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
+
+/* Alignment exception */
+	. = 0x600
+Alignment:
+	EXCEPTION_PROLOG
+	mfspr	r4,SPRN_DAR
+	stw	r4,_DAR(r11)
+	mfspr	r5,SPRN_DSISR
+	stw	r5,_DSISR(r11)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_EE(0x600, alignment_exception)
+
+/* Program check exception */
+	EXCEPTION(0x700, ProgramCheck, program_check_exception, EXC_XFER_STD)
+
+/* No FPU on MPC8xx.  This exception is not supposed to happen.
+*/
+	EXCEPTION(0x800, FPUnavailable, unknown_exception, EXC_XFER_STD)
+
+/* Decrementer */
+	EXCEPTION(0x900, Decrementer, timer_interrupt, EXC_XFER_LITE)
+
+	EXCEPTION(0xa00, Trap_0a, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0xb00, Trap_0b, unknown_exception, EXC_XFER_EE)
+
+/* System call */
+	. = 0xc00
+SystemCall:
+	EXCEPTION_PROLOG
+	EXC_XFER_EE_LITE(0xc00, DoSyscall)
+
+/* Single step - not used on 601 */
+	EXCEPTION(0xd00, SingleStep, single_step_exception, EXC_XFER_STD)
+	EXCEPTION(0xe00, Trap_0e, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0xf00, Trap_0f, unknown_exception, EXC_XFER_EE)
+
+/* On the MPC8xx, this is a software emulation interrupt.  It occurs
+ * for all unimplemented and illegal instructions.
+ */
+	EXCEPTION(0x1000, SoftEmu, SoftwareEmulation, EXC_XFER_STD)
+
+	. = 0x1100
+/*
+ * For the MPC8xx, this is a software tablewalk to load the instruction
+ * TLB.  It is modelled after the example in the Motorola manual.  The task
+ * switch loads the M_TWB register with the pointer to the first level table.
+ * If we discover there is no second level table (value is zero) or if there
+ * is an invalid pte, we load that into the TLB, which causes another fault
+ * into the TLB Error interrupt where we can handle such problems.
+ * We have to use the MD_xxx registers for the tablewalk because the
+ * equivalent MI_xxx registers only perform the attribute functions.
+ */
+InstructionTLBMiss:
+#ifdef CONFIG_8xx_CPU6
+	stw	r3, 8(r0)
+#endif
+	DO_8xx_CPU6(0x3f80, r3)
+	mtspr	SPRN_M_TW, r10	/* Save a couple of working registers */
+	mfcr	r10
+	stw	r10, 0(r0)
+	stw	r11, 4(r0)
+	mfspr	r10, SPRN_SRR0	/* Get effective address of fault */
+	DO_8xx_CPU6(0x3780, r3)
+	mtspr	SPRN_MD_EPN, r10	/* Have to use MD_EPN for walk, MI_EPN can't */
+	mfspr	r10, SPRN_M_TWB	/* Get level 1 table entry address */
+
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	andi.	r11, r10, 0x0800	/* Address >= 0x80000000 */
+	beq	3f
+	lis	r11, swapper_pg_dir@h
+	ori	r11, r11, swapper_pg_dir@l
+	rlwimi	r10, r11, 0, 2, 19
+3:
+	lwz	r11, 0(r10)	/* Get the level 1 entry */
+	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
+	beq	2f		/* If zero, don't try to find a pte */
+
+	/* We have a pte table, so load the MI_TWC with the attributes
+	 * for this "segment."
+	 */
+	ori	r11,r11,1		/* Set valid bit */
+	DO_8xx_CPU6(0x2b80, r3)
+	mtspr	SPRN_MI_TWC, r11	/* Set segment attributes */
+	DO_8xx_CPU6(0x3b80, r3)
+	mtspr	SPRN_MD_TWC, r11	/* Load pte table base address */
+	mfspr	r11, SPRN_MD_TWC	/* ....and get the pte address */
+	lwz	r10, 0(r11)	/* Get the pte */
+
+	ori	r10, r10, _PAGE_ACCESSED
+	stw	r10, 0(r11)
+
+	/* The Linux PTE won't go exactly into the MMU TLB.
+	 * Software indicator bits 21, 22 and 28 must be clear.
+	 * Software indicator bits 24, 25, 26, and 27 must be
+	 * set.  All other Linux PTE bits control the behavior
+	 * of the MMU.
+	 */
+2:	li	r11, 0x00f0
+	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
+	DO_8xx_CPU6(0x2d80, r3)
+	mtspr	SPRN_MI_RPN, r10	/* Update TLB entry */
+
+	mfspr	r10, SPRN_M_TW	/* Restore registers */
+	lwz	r11, 0(r0)
+	mtcr	r11
+	lwz	r11, 4(r0)
+#ifdef CONFIG_8xx_CPU6
+	lwz	r3, 8(r0)
+#endif
+	rfi
+
+	. = 0x1200
+DataStoreTLBMiss:
+#ifdef CONFIG_8xx_CPU6
+	stw	r3, 8(r0)
+#endif
+	DO_8xx_CPU6(0x3f80, r3)
+	mtspr	SPRN_M_TW, r10	/* Save a couple of working registers */
+	mfcr	r10
+	stw	r10, 0(r0)
+	stw	r11, 4(r0)
+	mfspr	r10, SPRN_M_TWB	/* Get level 1 table entry address */
+
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	andi.	r11, r10, 0x0800
+	beq	3f
+	lis	r11, swapper_pg_dir@h
+	ori	r11, r11, swapper_pg_dir@l
+	rlwimi	r10, r11, 0, 2, 19
+3:
+	lwz	r11, 0(r10)	/* Get the level 1 entry */
+	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
+	beq	2f		/* If zero, don't try to find a pte */
+
+	/* We have a pte table, so load fetch the pte from the table.
+	 */
+	ori	r11, r11, 1	/* Set valid bit in physical L2 page */
+	DO_8xx_CPU6(0x3b80, r3)
+	mtspr	SPRN_MD_TWC, r11	/* Load pte table base address */
+	mfspr	r10, SPRN_MD_TWC	/* ....and get the pte address */
+	lwz	r10, 0(r10)	/* Get the pte */
+
+	/* Insert the Guarded flag into the TWC from the Linux PTE.
+	 * It is bit 27 of both the Linux PTE and the TWC (at least
+	 * I got that right :-).  It will be better when we can put
+	 * this into the Linux pgd/pmd and load it in the operation
+	 * above.
+	 */
+	rlwimi	r11, r10, 0, 27, 27
+	DO_8xx_CPU6(0x3b80, r3)
+	mtspr	SPRN_MD_TWC, r11
+
+	mfspr	r11, SPRN_MD_TWC	/* get the pte address again */
+	ori	r10, r10, _PAGE_ACCESSED
+	stw	r10, 0(r11)
+
+	/* The Linux PTE won't go exactly into the MMU TLB.
+	 * Software indicator bits 21, 22 and 28 must be clear.
+	 * Software indicator bits 24, 25, 26, and 27 must be
+	 * set.  All other Linux PTE bits control the behavior
+	 * of the MMU.
+	 */
+2:	li	r11, 0x00f0
+	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
+	DO_8xx_CPU6(0x3d80, r3)
+	mtspr	SPRN_MD_RPN, r10	/* Update TLB entry */
+
+	mfspr	r10, SPRN_M_TW	/* Restore registers */
+	lwz	r11, 0(r0)
+	mtcr	r11
+	lwz	r11, 4(r0)
+#ifdef CONFIG_8xx_CPU6
+	lwz	r3, 8(r0)
+#endif
+	rfi
+
+/* This is an instruction TLB error on the MPC8xx.  This could be due
+ * to many reasons, such as executing guarded memory or illegal instruction
+ * addresses.  There is nothing to do but handle a big time error fault.
+ */
+	. = 0x1300
+InstructionTLBError:
+	b	InstructionAccess
+
+/* This is the data TLB error on the MPC8xx.  This could be due to
+ * many reasons, including a dirty update to a pte.  We can catch that
+ * one here, but anything else is an error.  First, we track down the
+ * Linux pte.  If it is valid, write access is allowed, but the
+ * page dirty bit is not set, we will set it and reload the TLB.  For
+ * any other case, we bail out to a higher level function that can
+ * handle it.
+ */
+	. = 0x1400
+DataTLBError:
+#ifdef CONFIG_8xx_CPU6
+	stw	r3, 8(r0)
+#endif
+	DO_8xx_CPU6(0x3f80, r3)
+	mtspr	SPRN_M_TW, r10	/* Save a couple of working registers */
+	mfcr	r10
+	stw	r10, 0(r0)
+	stw	r11, 4(r0)
+
+	/* First, make sure this was a store operation.
+	*/
+	mfspr	r10, SPRN_DSISR
+	andis.	r11, r10, 0x0200	/* If set, indicates store op */
+	beq	2f
+
+	/* The EA of a data TLB miss is automatically stored in the MD_EPN
+	 * register.  The EA of a data TLB error is automatically stored in
+	 * the DAR, but not the MD_EPN register.  We must copy the 20 most
+	 * significant bits of the EA from the DAR to MD_EPN before we
+	 * start walking the page tables.  We also need to copy the CASID
+	 * value from the M_CASID register.
+	 * Addendum:  The EA of a data TLB error is _supposed_ to be stored
+	 * in DAR, but it seems that this doesn't happen in some cases, such
+	 * as when the error is due to a dcbi instruction to a page with a
+	 * TLB that doesn't have the changed bit set.  In such cases, there
+	 * does not appear to be any way  to recover the EA of the error
+	 * since it is neither in DAR nor MD_EPN.  As a workaround, the
+	 * _PAGE_HWWRITE bit is set for all kernel data pages when the PTEs
+	 * are initialized in mapin_ram().  This will avoid the problem,
+	 * assuming we only use the dcbi instruction on kernel addresses.
+	 */
+	mfspr	r10, SPRN_DAR
+	rlwinm	r11, r10, 0, 0, 19
+	ori	r11, r11, MD_EVALID
+	mfspr	r10, SPRN_M_CASID
+	rlwimi	r11, r10, 0, 28, 31
+	DO_8xx_CPU6(0x3780, r3)
+	mtspr	SPRN_MD_EPN, r11
+
+	mfspr	r10, SPRN_M_TWB	/* Get level 1 table entry address */
+
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	andi.	r11, r10, 0x0800
+	beq	3f
+	lis	r11, swapper_pg_dir@h
+	ori	r11, r11, swapper_pg_dir@l
+	rlwimi	r10, r11, 0, 2, 19
+3:
+	lwz	r11, 0(r10)	/* Get the level 1 entry */
+	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
+	beq	2f		/* If zero, bail */
+
+	/* We have a pte table, so fetch the pte from the table.
+	 */
+	ori	r11, r11, 1		/* Set valid bit in physical L2 page */
+	DO_8xx_CPU6(0x3b80, r3)
+	mtspr	SPRN_MD_TWC, r11		/* Load pte table base address */
+	mfspr	r11, SPRN_MD_TWC		/* ....and get the pte address */
+	lwz	r10, 0(r11)		/* Get the pte */
+
+	andi.	r11, r10, _PAGE_RW	/* Is it writeable? */
+	beq	2f			/* Bail out if not */
+
+	/* Update 'changed', among others.
+	*/
+	ori	r10, r10, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
+	mfspr	r11, SPRN_MD_TWC		/* Get pte address again */
+	stw	r10, 0(r11)		/* and update pte in table */
+
+	/* The Linux PTE won't go exactly into the MMU TLB.
+	 * Software indicator bits 21, 22 and 28 must be clear.
+	 * Software indicator bits 24, 25, 26, and 27 must be
+	 * set.  All other Linux PTE bits control the behavior
+	 * of the MMU.
+	 */
+	li	r11, 0x00f0
+	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
+	DO_8xx_CPU6(0x3d80, r3)
+	mtspr	SPRN_MD_RPN, r10	/* Update TLB entry */
+
+	mfspr	r10, SPRN_M_TW	/* Restore registers */
+	lwz	r11, 0(r0)
+	mtcr	r11
+	lwz	r11, 4(r0)
+#ifdef CONFIG_8xx_CPU6
+	lwz	r3, 8(r0)
+#endif
+	rfi
+2:
+	mfspr	r10, SPRN_M_TW	/* Restore registers */
+	lwz	r11, 0(r0)
+	mtcr	r11
+	lwz	r11, 4(r0)
+#ifdef CONFIG_8xx_CPU6
+	lwz	r3, 8(r0)
+#endif
+	b	DataAccess
+
+	EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1700, Trap_17, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1a00, Trap_1a, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1b00, Trap_1b, unknown_exception, EXC_XFER_EE)
+
+/* On the MPC8xx, these next four traps are used for development
+ * support of breakpoints and such.  Someday I will get around to
+ * using them.
+ */
+	EXCEPTION(0x1c00, Trap_1c, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1d00, Trap_1d, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1e00, Trap_1e, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1f00, Trap_1f, unknown_exception, EXC_XFER_EE)
+
+	. = 0x2000
+
+	.globl	giveup_fpu
+giveup_fpu:
+	blr
+
+/*
+ * This is where the main kernel code starts.
+ */
+start_here:
+	/* ptr to current */
+	lis	r2,init_task@h
+	ori	r2,r2,init_task@l
+
+	/* ptr to phys current thread */
+	tophys(r4,r2)
+	addi	r4,r4,THREAD	/* init task's THREAD */
+	mtspr	SPRN_SPRG3,r4
+	li	r3,0
+	mtspr	SPRN_SPRG2,r3	/* 0 => r1 has kernel sp */
+
+	/* stack */
+	lis	r1,init_thread_union@ha
+	addi	r1,r1,init_thread_union@l
+	li	r0,0
+	stwu	r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
+
+	bl	early_init	/* We have to do this with MMU on */
+
+/*
+ * Decide what sort of machine this is and initialize the MMU.
+ */
+	mr	r3,r31
+	mr	r4,r30
+	mr	r5,r29
+	mr	r6,r28
+	mr	r7,r27
+	bl	machine_init
+	bl	MMU_init
+
+/*
+ * Go back to running unmapped so we can load up new values
+ * and change to using our exception vectors.
+ * On the 8xx, all we have to do is invalidate the TLB to clear
+ * the old 8M byte TLB mappings and load the page table base register.
+ */
+	/* The right way to do this would be to track it down through
+	 * init's THREAD like the context switch code does, but this is
+	 * easier......until someone changes init's static structures.
+	 */
+	lis	r6, swapper_pg_dir@h
+	ori	r6, r6, swapper_pg_dir@l
+	tophys(r6,r6)
+#ifdef CONFIG_8xx_CPU6
+	lis	r4, cpu6_errata_word@h
+	ori	r4, r4, cpu6_errata_word@l
+	li	r3, 0x3980
+	stw	r3, 12(r4)
+	lwz	r3, 12(r4)
+#endif
+	mtspr	SPRN_M_TWB, r6
+	lis	r4,2f@h
+	ori	r4,r4,2f@l
+	tophys(r4,r4)
+	li	r3,MSR_KERNEL & ~(MSR_IR|MSR_DR)
+	mtspr	SPRN_SRR0,r4
+	mtspr	SPRN_SRR1,r3
+	rfi
+/* Load up the kernel context */
+2:
+	SYNC			/* Force all PTE updates to finish */
+	tlbia			/* Clear all TLB entries */
+	sync			/* wait for tlbia/tlbie to finish */
+	TLBSYNC			/* ... on all CPUs */
+
+	/* set up the PTE pointers for the Abatron bdiGDB.
+	*/
+	tovirt(r6,r6)
+	lis	r5, abatron_pteptrs@h
+	ori	r5, r5, abatron_pteptrs@l
+	stw	r5, 0xf0(r0)	/* Must match your Abatron config file */
+	tophys(r5,r5)
+	stw	r6, 0(r5)
+
+/* Now turn on the MMU for real! */
+	li	r4,MSR_KERNEL
+	lis	r3,start_kernel@h
+	ori	r3,r3,start_kernel@l
+	mtspr	SPRN_SRR0,r3
+	mtspr	SPRN_SRR1,r4
+	rfi			/* enable MMU and jump to start_kernel */
+
+/* Set up the initial MMU state so we can do the first level of
+ * kernel initialization.  This maps the first 8 MBytes of memory 1:1
+ * virtual to physical.  Also, set the cache mode since that is defined
+ * by TLB entries and perform any additional mapping (like of the IMMR).
+ * If configured to pin some TLBs, we pin the first 8 Mbytes of kernel,
+ * 24 Mbytes of data, and the 8M IMMR space.  Anything not covered by
+ * these mappings is mapped by page tables.
+ */
+initial_mmu:
+	tlbia			/* Invalidate all TLB entries */
+#ifdef CONFIG_PIN_TLB
+	lis	r8, MI_RSV4I@h
+	ori	r8, r8, 0x1c00
+#else
+	li	r8, 0
+#endif
+	mtspr	SPRN_MI_CTR, r8	/* Set instruction MMU control */
+
+#ifdef CONFIG_PIN_TLB
+	lis	r10, (MD_RSV4I | MD_RESETVAL)@h
+	ori	r10, r10, 0x1c00
+	mr	r8, r10
+#else
+	lis	r10, MD_RESETVAL@h
+#endif
+#ifndef CONFIG_8xx_COPYBACK
+	oris	r10, r10, MD_WTDEF@h
+#endif
+	mtspr	SPRN_MD_CTR, r10	/* Set data TLB control */
+
+	/* Now map the lower 8 Meg into the TLBs.  For this quick hack,
+	 * we can load the instruction and data TLB registers with the
+	 * same values.
+	 */
+	lis	r8, KERNELBASE@h	/* Create vaddr for TLB */
+	ori	r8, r8, MI_EVALID	/* Mark it valid */
+	mtspr	SPRN_MI_EPN, r8
+	mtspr	SPRN_MD_EPN, r8
+	li	r8, MI_PS8MEG		/* Set 8M byte page */
+	ori	r8, r8, MI_SVALID	/* Make it valid */
+	mtspr	SPRN_MI_TWC, r8
+	mtspr	SPRN_MD_TWC, r8
+	li	r8, MI_BOOTINIT		/* Create RPN for address 0 */
+	mtspr	SPRN_MI_RPN, r8		/* Store TLB entry */
+	mtspr	SPRN_MD_RPN, r8
+	lis	r8, MI_Kp@h		/* Set the protection mode */
+	mtspr	SPRN_MI_AP, r8
+	mtspr	SPRN_MD_AP, r8
+
+	/* Map another 8 MByte at the IMMR to get the processor
+	 * internal registers (among other things).
+	 */
+#ifdef CONFIG_PIN_TLB
+	addi	r10, r10, 0x0100
+	mtspr	SPRN_MD_CTR, r10
+#endif
+	mfspr	r9, 638			/* Get current IMMR */
+	andis.	r9, r9, 0xff80		/* Get 8Mbyte boundary */
+
+	mr	r8, r9			/* Create vaddr for TLB */
+	ori	r8, r8, MD_EVALID	/* Mark it valid */
+	mtspr	SPRN_MD_EPN, r8
+	li	r8, MD_PS8MEG		/* Set 8M byte page */
+	ori	r8, r8, MD_SVALID	/* Make it valid */
+	mtspr	SPRN_MD_TWC, r8
+	mr	r8, r9			/* Create paddr for TLB */
+	ori	r8, r8, MI_BOOTINIT|0x2 /* Inhibit cache -- Cort */
+	mtspr	SPRN_MD_RPN, r8
+
+#ifdef CONFIG_PIN_TLB
+	/* Map two more 8M kernel data pages.
+	*/
+	addi	r10, r10, 0x0100
+	mtspr	SPRN_MD_CTR, r10
+
+	lis	r8, KERNELBASE@h	/* Create vaddr for TLB */
+	addis	r8, r8, 0x0080		/* Add 8M */
+	ori	r8, r8, MI_EVALID	/* Mark it valid */
+	mtspr	SPRN_MD_EPN, r8
+	li	r9, MI_PS8MEG		/* Set 8M byte page */
+	ori	r9, r9, MI_SVALID	/* Make it valid */
+	mtspr	SPRN_MD_TWC, r9
+	li	r11, MI_BOOTINIT	/* Create RPN for address 0 */
+	addis	r11, r11, 0x0080	/* Add 8M */
+	mtspr	SPRN_MD_RPN, r8
+
+	addis	r8, r8, 0x0080		/* Add 8M */
+	mtspr	SPRN_MD_EPN, r8
+	mtspr	SPRN_MD_TWC, r9
+	addis	r11, r11, 0x0080	/* Add 8M */
+	mtspr	SPRN_MD_RPN, r8
+#endif
+
+	/* Since the cache is enabled according to the information we
+	 * just loaded into the TLB, invalidate and enable the caches here.
+	 * We should probably check/set other modes....later.
+	 */
+	lis	r8, IDC_INVALL@h
+	mtspr	SPRN_IC_CST, r8
+	mtspr	SPRN_DC_CST, r8
+	lis	r8, IDC_ENABLE@h
+	mtspr	SPRN_IC_CST, r8
+#ifdef CONFIG_8xx_COPYBACK
+	mtspr	SPRN_DC_CST, r8
+#else
+	/* For a debug option, I left this here to easily enable
+	 * the write through cache mode
+	 */
+	lis	r8, DC_SFWT@h
+	mtspr	SPRN_DC_CST, r8
+	lis	r8, IDC_ENABLE@h
+	mtspr	SPRN_DC_CST, r8
+#endif
+	blr
+
+
+/*
+ * Set up to use a given MMU context.
+ * r3 is context number, r4 is PGD pointer.
+ *
+ * We place the physical address of the new task page directory loaded
+ * into the MMU base register, and set the ASID compare register with
+ * the new "context."
+ */
+_GLOBAL(set_context)
+
+#ifdef CONFIG_BDI_SWITCH
+	/* Context switch the PTE pointer for the Abatron BDI2000.
+	 * The PGDIR is passed as second argument.
+	 */
+	lis	r5, KERNELBASE@h
+	lwz	r5, 0xf0(r5)
+	stw	r4, 0x4(r5)
+#endif
+
+#ifdef CONFIG_8xx_CPU6
+	lis	r6, cpu6_errata_word@h
+	ori	r6, r6, cpu6_errata_word@l
+	tophys	(r4, r4)
+	li	r7, 0x3980
+	stw	r7, 12(r6)
+	lwz	r7, 12(r6)
+        mtspr   SPRN_M_TWB, r4               /* Update MMU base address */
+	li	r7, 0x3380
+	stw	r7, 12(r6)
+	lwz	r7, 12(r6)
+        mtspr   SPRN_M_CASID, r3             /* Update context */
+#else
+        mtspr   SPRN_M_CASID,r3		/* Update context */
+	tophys	(r4, r4)
+	mtspr	SPRN_M_TWB, r4		/* and pgd */
+#endif
+	SYNC
+	blr
+
+#ifdef CONFIG_8xx_CPU6
+/* It's here because it is unique to the 8xx.
+ * It is important we get called with interrupts disabled.  I used to
+ * do that, but it appears that all code that calls this already had
+ * interrupt disabled.
+ */
+	.globl	set_dec_cpu6
+set_dec_cpu6:
+	lis	r7, cpu6_errata_word@h
+	ori	r7, r7, cpu6_errata_word@l
+	li	r4, 0x2c00
+	stw	r4, 8(r7)
+	lwz	r4, 8(r7)
+        mtspr   22, r3		/* Update Decrementer */
+	SYNC
+	blr
+#endif
+
+/*
+ * We put a few things here that have to be page-aligned.
+ * This stuff goes at the beginning of the data segment,
+ * which is page-aligned.
+ */
+	.data
+	.globl	sdata
+sdata:
+	.globl	empty_zero_page
+empty_zero_page:
+	.space	4096
+
+	.globl	swapper_pg_dir
+swapper_pg_dir:
+	.space	4096
+
+/*
+ * This space gets a copy of optional info passed to us by the bootstrap
+ * Used to pass parameters into the kernel like root=/dev/sda1, etc.
+ */
+	.globl	cmd_line
+cmd_line:
+	.space	512
+
+/* Room for two PTE table poiners, usually the kernel and current user
+ * pointer to their respective root page table (pgdir).
+ */
+abatron_pteptrs:
+	.space	8
+
+#ifdef CONFIG_8xx_CPU6
+	.globl	cpu6_errata_word
+cpu6_errata_word:
+	.space	16
+#endif
+
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
new file mode 100644
index 000000000000..8d60fa99fc4b
--- /dev/null
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -0,0 +1,1063 @@
+/*
+ * arch/ppc/kernel/head_fsl_booke.S
+ *
+ * Kernel execution entry point code.
+ *
+ *    Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
+ *      Initial PowerPC version.
+ *    Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu>
+ *      Rewritten for PReP
+ *    Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
+ *      Low-level exception handers, MMU support, and rewrite.
+ *    Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
+ *      PowerPC 8xx modifications.
+ *    Copyright (c) 1998-1999 TiVo, Inc.
+ *      PowerPC 403GCX modifications.
+ *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ *      PowerPC 403GCX/405GP modifications.
+ *    Copyright 2000 MontaVista Software Inc.
+ *	PPC405 modifications
+ *      PowerPC 403GCX/405GP modifications.
+ * 	Author: MontaVista Software, Inc.
+ *         	frank_rowand@mvista.com or source@mvista.com
+ * 	   	debbie_chu@mvista.com
+ *    Copyright 2002-2004 MontaVista Software, Inc.
+ *      PowerPC 44x support, Matt Porter <mporter@kernel.crashing.org>
+ *    Copyright 2004 Freescale Semiconductor, Inc
+ *      PowerPC e500 modifications, Kumar Gala <galak@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/pgtable.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include "head_booke.h"
+
+/* As with the other PowerPC ports, it is expected that when code
+ * execution begins here, the following registers contain valid, yet
+ * optional, information:
+ *
+ *   r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.)
+ *   r4 - Starting address of the init RAM disk
+ *   r5 - Ending address of the init RAM disk
+ *   r6 - Start of kernel command line string (e.g. "mem=128")
+ *   r7 - End of kernel command line string
+ *
+ */
+	.text
+_GLOBAL(_stext)
+_GLOBAL(_start)
+	/*
+	 * Reserve a word at a fixed location to store the address
+	 * of abatron_pteptrs
+	 */
+	nop
+/*
+ * Save parameters we are passed
+ */
+	mr	r31,r3
+	mr	r30,r4
+	mr	r29,r5
+	mr	r28,r6
+	mr	r27,r7
+	li	r24,0		/* CPU number */
+
+/* We try to not make any assumptions about how the boot loader
+ * setup or used the TLBs.  We invalidate all mappings from the
+ * boot loader and load a single entry in TLB1[0] to map the
+ * first 16M of kernel memory.  Any boot info passed from the
+ * bootloader needs to live in this first 16M.
+ *
+ * Requirement on bootloader:
+ *  - The page we're executing in needs to reside in TLB1 and
+ *    have IPROT=1.  If not an invalidate broadcast could
+ *    evict the entry we're currently executing in.
+ *
+ *  r3 = Index of TLB1 were executing in
+ *  r4 = Current MSR[IS]
+ *  r5 = Index of TLB1 temp mapping
+ *
+ * Later in mapin_ram we will correctly map lowmem, and resize TLB1[0]
+ * if needed
+ */
+
+/* 1. Find the index of the entry we're executing in */
+	bl	invstr				/* Find our address */
+invstr:	mflr	r6				/* Make it accessible */
+	mfmsr	r7
+	rlwinm	r4,r7,27,31,31			/* extract MSR[IS] */
+	mfspr	r7, SPRN_PID0
+	slwi	r7,r7,16
+	or	r7,r7,r4
+	mtspr	SPRN_MAS6,r7
+	tlbsx	0,r6				/* search MSR[IS], SPID=PID0 */
+#ifndef CONFIG_E200
+	mfspr	r7,SPRN_MAS1
+	andis.	r7,r7,MAS1_VALID@h
+	bne	match_TLB
+	mfspr	r7,SPRN_PID1
+	slwi	r7,r7,16
+	or	r7,r7,r4
+	mtspr	SPRN_MAS6,r7
+	tlbsx	0,r6				/* search MSR[IS], SPID=PID1 */
+	mfspr	r7,SPRN_MAS1
+	andis.	r7,r7,MAS1_VALID@h
+	bne	match_TLB
+	mfspr	r7, SPRN_PID2
+	slwi	r7,r7,16
+	or	r7,r7,r4
+	mtspr	SPRN_MAS6,r7
+	tlbsx	0,r6				/* Fall through, we had to match */
+#endif
+match_TLB:
+	mfspr	r7,SPRN_MAS0
+	rlwinm	r3,r7,16,20,31			/* Extract MAS0(Entry) */
+
+	mfspr	r7,SPRN_MAS1			/* Insure IPROT set */
+	oris	r7,r7,MAS1_IPROT@h
+	mtspr	SPRN_MAS1,r7
+	tlbwe
+
+/* 2. Invalidate all entries except the entry we're executing in */
+	mfspr	r9,SPRN_TLB1CFG
+	andi.	r9,r9,0xfff
+	li	r6,0				/* Set Entry counter to 0 */
+1:	lis	r7,0x1000			/* Set MAS0(TLBSEL) = 1 */
+	rlwimi	r7,r6,16,4,15			/* Setup MAS0 = TLBSEL | ESEL(r6) */
+	mtspr	SPRN_MAS0,r7
+	tlbre
+	mfspr	r7,SPRN_MAS1
+	rlwinm	r7,r7,0,2,31			/* Clear MAS1 Valid and IPROT */
+	cmpw	r3,r6
+	beq	skpinv				/* Dont update the current execution TLB */
+	mtspr	SPRN_MAS1,r7
+	tlbwe
+	isync
+skpinv:	addi	r6,r6,1				/* Increment */
+	cmpw	r6,r9				/* Are we done? */
+	bne	1b				/* If not, repeat */
+
+	/* Invalidate TLB0 */
+	li      r6,0x04
+	tlbivax 0,r6
+#ifdef CONFIG_SMP
+	tlbsync
+#endif
+	/* Invalidate TLB1 */
+	li      r6,0x0c
+	tlbivax 0,r6
+#ifdef CONFIG_SMP
+	tlbsync
+#endif
+	msync
+
+/* 3. Setup a temp mapping and jump to it */
+	andi.	r5, r3, 0x1	/* Find an entry not used and is non-zero */
+	addi	r5, r5, 0x1
+	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
+	rlwimi	r7,r3,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r3) */
+	mtspr	SPRN_MAS0,r7
+	tlbre
+
+	/* Just modify the entry ID and EPN for the temp mapping */
+	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
+	rlwimi	r7,r5,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r5) */
+	mtspr	SPRN_MAS0,r7
+	xori	r6,r4,1		/* Setup TMP mapping in the other Address space */
+	slwi	r6,r6,12
+	oris	r6,r6,(MAS1_VALID|MAS1_IPROT)@h
+	ori	r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_4K))@l
+	mtspr	SPRN_MAS1,r6
+	mfspr	r6,SPRN_MAS2
+	li	r7,0		/* temp EPN = 0 */
+	rlwimi	r7,r6,0,20,31
+	mtspr	SPRN_MAS2,r7
+	tlbwe
+
+	xori	r6,r4,1
+	slwi	r6,r6,5		/* setup new context with other address space */
+	bl	1f		/* Find our address */
+1:	mflr	r9
+	rlwimi	r7,r9,0,20,31
+	addi	r7,r7,24
+	mtspr	SPRN_SRR0,r7
+	mtspr	SPRN_SRR1,r6
+	rfi
+
+/* 4. Clear out PIDs & Search info */
+	li	r6,0
+	mtspr	SPRN_PID0,r6
+#ifndef CONFIG_E200
+	mtspr	SPRN_PID1,r6
+	mtspr	SPRN_PID2,r6
+#endif
+	mtspr	SPRN_MAS6,r6
+
+/* 5. Invalidate mapping we started in */
+	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
+	rlwimi	r7,r3,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r3) */
+	mtspr	SPRN_MAS0,r7
+	tlbre
+	li	r6,0
+	mtspr	SPRN_MAS1,r6
+	tlbwe
+	/* Invalidate TLB1 */
+	li      r9,0x0c
+	tlbivax 0,r9
+#ifdef CONFIG_SMP
+	tlbsync
+#endif
+	msync
+
+/* 6. Setup KERNELBASE mapping in TLB1[0] */
+	lis	r6,0x1000		/* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */
+	mtspr	SPRN_MAS0,r6
+	lis	r6,(MAS1_VALID|MAS1_IPROT)@h
+	ori	r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_16M))@l
+	mtspr	SPRN_MAS1,r6
+	li	r7,0
+	lis	r6,KERNELBASE@h
+	ori	r6,r6,KERNELBASE@l
+	rlwimi	r6,r7,0,20,31
+	mtspr	SPRN_MAS2,r6
+	li	r7,(MAS3_SX|MAS3_SW|MAS3_SR)
+	mtspr	SPRN_MAS3,r7
+	tlbwe
+
+/* 7. Jump to KERNELBASE mapping */
+	lis	r7,MSR_KERNEL@h
+	ori	r7,r7,MSR_KERNEL@l
+	bl	1f			/* Find our address */
+1:	mflr	r9
+	rlwimi	r6,r9,0,20,31
+	addi	r6,r6,24
+	mtspr	SPRN_SRR0,r6
+	mtspr	SPRN_SRR1,r7
+	rfi				/* start execution out of TLB1[0] entry */
+
+/* 8. Clear out the temp mapping */
+	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
+	rlwimi	r7,r5,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r5) */
+	mtspr	SPRN_MAS0,r7
+	tlbre
+	mtspr	SPRN_MAS1,r8
+	tlbwe
+	/* Invalidate TLB1 */
+	li      r9,0x0c
+	tlbivax 0,r9
+#ifdef CONFIG_SMP
+	tlbsync
+#endif
+	msync
+
+	/* Establish the interrupt vector offsets */
+	SET_IVOR(0,  CriticalInput);
+	SET_IVOR(1,  MachineCheck);
+	SET_IVOR(2,  DataStorage);
+	SET_IVOR(3,  InstructionStorage);
+	SET_IVOR(4,  ExternalInput);
+	SET_IVOR(5,  Alignment);
+	SET_IVOR(6,  Program);
+	SET_IVOR(7,  FloatingPointUnavailable);
+	SET_IVOR(8,  SystemCall);
+	SET_IVOR(9,  AuxillaryProcessorUnavailable);
+	SET_IVOR(10, Decrementer);
+	SET_IVOR(11, FixedIntervalTimer);
+	SET_IVOR(12, WatchdogTimer);
+	SET_IVOR(13, DataTLBError);
+	SET_IVOR(14, InstructionTLBError);
+	SET_IVOR(15, Debug);
+	SET_IVOR(32, SPEUnavailable);
+	SET_IVOR(33, SPEFloatingPointData);
+	SET_IVOR(34, SPEFloatingPointRound);
+#ifndef CONFIG_E200
+	SET_IVOR(35, PerformanceMonitor);
+#endif
+
+	/* Establish the interrupt vector base */
+	lis	r4,interrupt_base@h	/* IVPR only uses the high 16-bits */
+	mtspr	SPRN_IVPR,r4
+
+	/* Setup the defaults for TLB entries */
+	li	r2,(MAS4_TSIZED(BOOKE_PAGESZ_4K))@l
+#ifdef CONFIG_E200
+	oris	r2,r2,MAS4_TLBSELD(1)@h
+#endif
+   	mtspr	SPRN_MAS4, r2
+
+#if 0
+	/* Enable DOZE */
+	mfspr	r2,SPRN_HID0
+	oris	r2,r2,HID0_DOZE@h
+	mtspr	SPRN_HID0, r2
+#endif
+#ifdef CONFIG_E200
+	/* enable dedicated debug exception handling resources (Debug APU) */
+	mfspr	r2,SPRN_HID0
+	ori 	r2,r2,HID0_DAPUEN@l
+	mtspr	SPRN_HID0,r2
+#endif
+
+#if !defined(CONFIG_BDI_SWITCH)
+	/*
+	 * The Abatron BDI JTAG debugger does not tolerate others
+	 * mucking with the debug registers.
+	 */
+	lis	r2,DBCR0_IDM@h
+	mtspr	SPRN_DBCR0,r2
+	/* clear any residual debug events */
+	li	r2,-1
+	mtspr	SPRN_DBSR,r2
+#endif
+
+	/*
+	 * This is where the main kernel code starts.
+	 */
+
+	/* ptr to current */
+	lis	r2,init_task@h
+	ori	r2,r2,init_task@l
+
+	/* ptr to current thread */
+	addi	r4,r2,THREAD	/* init task's THREAD */
+	mtspr	SPRN_SPRG3,r4
+
+	/* stack */
+	lis	r1,init_thread_union@h
+	ori	r1,r1,init_thread_union@l
+	li	r0,0
+	stwu	r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
+
+	bl	early_init
+
+	mfspr	r3,SPRN_TLB1CFG
+	andi.	r3,r3,0xfff
+	lis	r4,num_tlbcam_entries@ha
+	stw	r3,num_tlbcam_entries@l(r4)
+/*
+ * Decide what sort of machine this is and initialize the MMU.
+ */
+	mr	r3,r31
+	mr	r4,r30
+	mr	r5,r29
+	mr	r6,r28
+	mr	r7,r27
+	bl	machine_init
+	bl	MMU_init
+
+	/* Setup PTE pointers for the Abatron bdiGDB */
+	lis	r6, swapper_pg_dir@h
+	ori	r6, r6, swapper_pg_dir@l
+	lis	r5, abatron_pteptrs@h
+	ori	r5, r5, abatron_pteptrs@l
+	lis	r4, KERNELBASE@h
+	ori	r4, r4, KERNELBASE@l
+	stw	r5, 0(r4)	/* Save abatron_pteptrs at a fixed location */
+	stw	r6, 0(r5)
+
+	/* Let's move on */
+	lis	r4,start_kernel@h
+	ori	r4,r4,start_kernel@l
+	lis	r3,MSR_KERNEL@h
+	ori	r3,r3,MSR_KERNEL@l
+	mtspr	SPRN_SRR0,r4
+	mtspr	SPRN_SRR1,r3
+	rfi			/* change context and jump to start_kernel */
+
+/* Macros to hide the PTE size differences
+ *
+ * FIND_PTE -- walks the page tables given EA & pgdir pointer
+ *   r10 -- EA of fault
+ *   r11 -- PGDIR pointer
+ *   r12 -- free
+ *   label 2: is the bailout case
+ *
+ * if we find the pte (fall through):
+ *   r11 is low pte word
+ *   r12 is pointer to the pte
+ */
+#ifdef CONFIG_PTE_64BIT
+#define PTE_FLAGS_OFFSET	4
+#define FIND_PTE	\
+	rlwinm 	r12, r10, 13, 19, 29;	/* Compute pgdir/pmd offset */	\
+	lwzx	r11, r12, r11;		/* Get pgd/pmd entry */		\
+	rlwinm.	r12, r11, 0, 0, 20;	/* Extract pt base address */	\
+	beq	2f;			/* Bail if no table */		\
+	rlwimi	r12, r10, 23, 20, 28;	/* Compute pte address */	\
+	lwz	r11, 4(r12);		/* Get pte entry */
+#else
+#define PTE_FLAGS_OFFSET	0
+#define FIND_PTE	\
+	rlwimi	r11, r10, 12, 20, 29;	/* Create L1 (pgdir/pmd) address */	\
+	lwz	r11, 0(r11);		/* Get L1 entry */			\
+	rlwinm.	r12, r11, 0, 0, 19;	/* Extract L2 (pte) base address */	\
+	beq	2f;			/* Bail if no table */			\
+	rlwimi	r12, r10, 22, 20, 29;	/* Compute PTE address */		\
+	lwz	r11, 0(r12);		/* Get Linux PTE */
+#endif
+
+/*
+ * Interrupt vector entry code
+ *
+ * The Book E MMUs are always on so we don't need to handle
+ * interrupts in real mode as with previous PPC processors. In
+ * this case we handle interrupts in the kernel virtual address
+ * space.
+ *
+ * Interrupt vectors are dynamically placed relative to the
+ * interrupt prefix as determined by the address of interrupt_base.
+ * The interrupt vectors offsets are programmed using the labels
+ * for each interrupt vector entry.
+ *
+ * Interrupt vectors must be aligned on a 16 byte boundary.
+ * We align on a 32 byte cache line boundary for good measure.
+ */
+
+interrupt_base:
+	/* Critical Input Interrupt */
+	CRITICAL_EXCEPTION(0x0100, CriticalInput, unknown_exception)
+
+	/* Machine Check Interrupt */
+#ifdef CONFIG_E200
+	/* no RFMCI, MCSRRs on E200 */
+	CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
+#else
+	MCHECK_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
+#endif
+
+	/* Data Storage Interrupt */
+	START_EXCEPTION(DataStorage)
+	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
+	mtspr	SPRN_SPRG1, r11
+	mtspr	SPRN_SPRG4W, r12
+	mtspr	SPRN_SPRG5W, r13
+	mfcr	r11
+	mtspr	SPRN_SPRG7W, r11
+
+	/*
+	 * Check if it was a store fault, if not then bail
+	 * because a user tried to access a kernel or
+	 * read-protected page.  Otherwise, get the
+	 * offending address and handle it.
+	 */
+	mfspr	r10, SPRN_ESR
+	andis.	r10, r10, ESR_ST@h
+	beq	2f
+
+	mfspr	r10, SPRN_DEAR		/* Get faulting address */
+
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	lis	r11, TASK_SIZE@h
+	ori	r11, r11, TASK_SIZE@l
+	cmplw	0, r10, r11
+	bge	2f
+
+	/* Get the PGD for the current thread */
+3:
+	mfspr	r11,SPRN_SPRG3
+	lwz	r11,PGDIR(r11)
+4:
+	FIND_PTE
+
+	/* Are _PAGE_USER & _PAGE_RW set & _PAGE_HWWRITE not? */
+	andi.	r13, r11, _PAGE_RW|_PAGE_USER|_PAGE_HWWRITE
+	cmpwi	0, r13, _PAGE_RW|_PAGE_USER
+	bne	2f			/* Bail if not */
+
+	/* Update 'changed'. */
+	ori	r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
+	stw	r11, PTE_FLAGS_OFFSET(r12) /* Update Linux page table */
+
+	/* MAS2 not updated as the entry does exist in the tlb, this
+	   fault taken to detect state transition (eg: COW -> DIRTY)
+	 */
+	andi.	r11, r11, _PAGE_HWEXEC
+	rlwimi	r11, r11, 31, 27, 27	/* SX <- _PAGE_HWEXEC */
+	ori     r11, r11, (MAS3_UW|MAS3_SW|MAS3_UR|MAS3_SR)@l /* set static perms */
+
+	/* update search PID in MAS6, AS = 0 */
+	mfspr	r12, SPRN_PID0
+	slwi	r12, r12, 16
+	mtspr	SPRN_MAS6, r12
+
+	/* find the TLB index that caused the fault.  It has to be here. */
+	tlbsx	0, r10
+
+	/* only update the perm bits, assume the RPN is fine */
+	mfspr	r12, SPRN_MAS3
+	rlwimi	r12, r11, 0, 20, 31
+	mtspr	SPRN_MAS3,r12
+	tlbwe
+
+	/* Done...restore registers and get out of here.  */
+	mfspr	r11, SPRN_SPRG7R
+	mtcr	r11
+	mfspr	r13, SPRN_SPRG5R
+	mfspr	r12, SPRN_SPRG4R
+	mfspr	r11, SPRN_SPRG1
+	mfspr	r10, SPRN_SPRG0
+	rfi			/* Force context change */
+
+2:
+	/*
+	 * The bailout.  Restore registers to pre-exception conditions
+	 * and call the heavyweights to help us out.
+	 */
+	mfspr	r11, SPRN_SPRG7R
+	mtcr	r11
+	mfspr	r13, SPRN_SPRG5R
+	mfspr	r12, SPRN_SPRG4R
+	mfspr	r11, SPRN_SPRG1
+	mfspr	r10, SPRN_SPRG0
+	b	data_access
+
+	/* Instruction Storage Interrupt */
+	INSTRUCTION_STORAGE_EXCEPTION
+
+	/* External Input Interrupt */
+	EXCEPTION(0x0500, ExternalInput, do_IRQ, EXC_XFER_LITE)
+
+	/* Alignment Interrupt */
+	ALIGNMENT_EXCEPTION
+
+	/* Program Interrupt */
+	PROGRAM_EXCEPTION
+
+	/* Floating Point Unavailable Interrupt */
+#ifdef CONFIG_PPC_FPU
+	FP_UNAVAILABLE_EXCEPTION
+#else
+#ifdef CONFIG_E200
+	/* E200 treats 'normal' floating point instructions as FP Unavail exception */
+	EXCEPTION(0x0800, FloatingPointUnavailable, program_check_exception, EXC_XFER_EE)
+#else
+	EXCEPTION(0x0800, FloatingPointUnavailable, unknown_exception, EXC_XFER_EE)
+#endif
+#endif
+
+	/* System Call Interrupt */
+	START_EXCEPTION(SystemCall)
+	NORMAL_EXCEPTION_PROLOG
+	EXC_XFER_EE_LITE(0x0c00, DoSyscall)
+
+	/* Auxillary Processor Unavailable Interrupt */
+	EXCEPTION(0x2900, AuxillaryProcessorUnavailable, unknown_exception, EXC_XFER_EE)
+
+	/* Decrementer Interrupt */
+	DECREMENTER_EXCEPTION
+
+	/* Fixed Internal Timer Interrupt */
+	/* TODO: Add FIT support */
+	EXCEPTION(0x3100, FixedIntervalTimer, unknown_exception, EXC_XFER_EE)
+
+	/* Watchdog Timer Interrupt */
+#ifdef CONFIG_BOOKE_WDT
+	CRITICAL_EXCEPTION(0x3200, WatchdogTimer, WatchdogException)
+#else
+	CRITICAL_EXCEPTION(0x3200, WatchdogTimer, unknown_exception)
+#endif
+
+	/* Data TLB Error Interrupt */
+	START_EXCEPTION(DataTLBError)
+	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
+	mtspr	SPRN_SPRG1, r11
+	mtspr	SPRN_SPRG4W, r12
+	mtspr	SPRN_SPRG5W, r13
+	mfcr	r11
+	mtspr	SPRN_SPRG7W, r11
+	mfspr	r10, SPRN_DEAR		/* Get faulting address */
+
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	lis	r11, TASK_SIZE@h
+	ori	r11, r11, TASK_SIZE@l
+	cmplw	5, r10, r11
+	blt	5, 3f
+	lis	r11, swapper_pg_dir@h
+	ori	r11, r11, swapper_pg_dir@l
+
+	mfspr	r12,SPRN_MAS1		/* Set TID to 0 */
+	rlwinm	r12,r12,0,16,1
+	mtspr	SPRN_MAS1,r12
+
+	b	4f
+
+	/* Get the PGD for the current thread */
+3:
+	mfspr	r11,SPRN_SPRG3
+	lwz	r11,PGDIR(r11)
+
+4:
+	FIND_PTE
+	andi.	r13, r11, _PAGE_PRESENT	/* Is the page present? */
+	beq	2f			/* Bail if not present */
+
+#ifdef CONFIG_PTE_64BIT
+	lwz	r13, 0(r12)
+#endif
+	ori	r11, r11, _PAGE_ACCESSED
+	stw	r11, PTE_FLAGS_OFFSET(r12)
+
+	 /* Jump to common tlb load */
+	b	finish_tlb_load
+2:
+	/* The bailout.  Restore registers to pre-exception conditions
+	 * and call the heavyweights to help us out.
+	 */
+	mfspr	r11, SPRN_SPRG7R
+	mtcr	r11
+	mfspr	r13, SPRN_SPRG5R
+	mfspr	r12, SPRN_SPRG4R
+	mfspr	r11, SPRN_SPRG1
+	mfspr	r10, SPRN_SPRG0
+	b	data_access
+
+	/* Instruction TLB Error Interrupt */
+	/*
+	 * Nearly the same as above, except we get our
+	 * information from different registers and bailout
+	 * to a different point.
+	 */
+	START_EXCEPTION(InstructionTLBError)
+	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
+	mtspr	SPRN_SPRG1, r11
+	mtspr	SPRN_SPRG4W, r12
+	mtspr	SPRN_SPRG5W, r13
+	mfcr	r11
+	mtspr	SPRN_SPRG7W, r11
+	mfspr	r10, SPRN_SRR0		/* Get faulting address */
+
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	lis	r11, TASK_SIZE@h
+	ori	r11, r11, TASK_SIZE@l
+	cmplw	5, r10, r11
+	blt	5, 3f
+	lis	r11, swapper_pg_dir@h
+	ori	r11, r11, swapper_pg_dir@l
+
+	mfspr	r12,SPRN_MAS1		/* Set TID to 0 */
+	rlwinm	r12,r12,0,16,1
+	mtspr	SPRN_MAS1,r12
+
+	b	4f
+
+	/* Get the PGD for the current thread */
+3:
+	mfspr	r11,SPRN_SPRG3
+	lwz	r11,PGDIR(r11)
+
+4:
+	FIND_PTE
+	andi.	r13, r11, _PAGE_PRESENT	/* Is the page present? */
+	beq	2f			/* Bail if not present */
+
+#ifdef CONFIG_PTE_64BIT
+	lwz	r13, 0(r12)
+#endif
+	ori	r11, r11, _PAGE_ACCESSED
+	stw	r11, PTE_FLAGS_OFFSET(r12)
+
+	/* Jump to common TLB load point */
+	b	finish_tlb_load
+
+2:
+	/* The bailout.  Restore registers to pre-exception conditions
+	 * and call the heavyweights to help us out.
+	 */
+	mfspr	r11, SPRN_SPRG7R
+	mtcr	r11
+	mfspr	r13, SPRN_SPRG5R
+	mfspr	r12, SPRN_SPRG4R
+	mfspr	r11, SPRN_SPRG1
+	mfspr	r10, SPRN_SPRG0
+	b	InstructionStorage
+
+#ifdef CONFIG_SPE
+	/* SPE Unavailable */
+	START_EXCEPTION(SPEUnavailable)
+	NORMAL_EXCEPTION_PROLOG
+	bne	load_up_spe
+	addi    r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_EE_LITE(0x2010, KernelSPE)
+#else
+	EXCEPTION(0x2020, SPEUnavailable, unknown_exception, EXC_XFER_EE)
+#endif /* CONFIG_SPE */
+
+	/* SPE Floating Point Data */
+#ifdef CONFIG_SPE
+	EXCEPTION(0x2030, SPEFloatingPointData, SPEFloatingPointException, EXC_XFER_EE);
+#else
+	EXCEPTION(0x2040, SPEFloatingPointData, unknown_exception, EXC_XFER_EE)
+#endif /* CONFIG_SPE */
+
+	/* SPE Floating Point Round */
+	EXCEPTION(0x2050, SPEFloatingPointRound, unknown_exception, EXC_XFER_EE)
+
+	/* Performance Monitor */
+	EXCEPTION(0x2060, PerformanceMonitor, performance_monitor_exception, EXC_XFER_STD)
+
+
+	/* Debug Interrupt */
+	DEBUG_EXCEPTION
+
+/*
+ * Local functions
+ */
+
+	/*
+	 * Data TLB exceptions will bail out to this point
+	 * if they can't resolve the lightweight TLB fault.
+	 */
+data_access:
+	NORMAL_EXCEPTION_PROLOG
+	mfspr	r5,SPRN_ESR		/* Grab the ESR, save it, pass arg3 */
+	stw	r5,_ESR(r11)
+	mfspr	r4,SPRN_DEAR		/* Grab the DEAR, save it, pass arg2 */
+	andis.	r10,r5,(ESR_ILK|ESR_DLK)@h
+	bne	1f
+	EXC_XFER_EE_LITE(0x0300, handle_page_fault)
+1:
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_EE_LITE(0x0300, CacheLockingException)
+
+/*
+
+ * Both the instruction and data TLB miss get to this
+ * point to load the TLB.
+ * 	r10 - EA of fault
+ * 	r11 - TLB (info from Linux PTE)
+ * 	r12, r13 - available to use
+ * 	CR5 - results of addr < TASK_SIZE
+ *	MAS0, MAS1 - loaded with proper value when we get here
+ *	MAS2, MAS3 - will need additional info from Linux PTE
+ *	Upon exit, we reload everything and RFI.
+ */
+finish_tlb_load:
+	/*
+	 * We set execute, because we don't have the granularity to
+	 * properly set this at the page level (Linux problem).
+	 * Many of these bits are software only.  Bits we don't set
+	 * here we (properly should) assume have the appropriate value.
+	 */
+
+	mfspr	r12, SPRN_MAS2
+#ifdef CONFIG_PTE_64BIT
+	rlwimi	r12, r11, 26, 24, 31	/* extract ...WIMGE from pte */
+#else
+	rlwimi	r12, r11, 26, 27, 31	/* extract WIMGE from pte */
+#endif
+	mtspr	SPRN_MAS2, r12
+
+	bge	5, 1f
+
+	/* is user addr */
+	andi.	r12, r11, (_PAGE_USER | _PAGE_HWWRITE | _PAGE_HWEXEC)
+	andi.	r10, r11, _PAGE_USER	/* Test for _PAGE_USER */
+	srwi	r10, r12, 1
+	or	r12, r12, r10	/* Copy user perms into supervisor */
+	iseleq	r12, 0, r12
+	b	2f
+
+	/* is kernel addr */
+1:	rlwinm	r12, r11, 31, 29, 29	/* Extract _PAGE_HWWRITE into SW */
+	ori	r12, r12, (MAS3_SX | MAS3_SR)
+
+#ifdef CONFIG_PTE_64BIT
+2:	rlwimi	r12, r13, 24, 0, 7	/* grab RPN[32:39] */
+	rlwimi	r12, r11, 24, 8, 19	/* grab RPN[40:51] */
+	mtspr	SPRN_MAS3, r12
+BEGIN_FTR_SECTION
+	srwi	r10, r13, 8		/* grab RPN[8:31] */
+	mtspr	SPRN_MAS7, r10
+END_FTR_SECTION_IFSET(CPU_FTR_BIG_PHYS)
+#else
+2:	rlwimi	r11, r12, 0, 20, 31	/* Extract RPN from PTE and merge with perms */
+	mtspr	SPRN_MAS3, r11
+#endif
+#ifdef CONFIG_E200
+	/* Round robin TLB1 entries assignment */
+	mfspr	r12, SPRN_MAS0
+
+	/* Extract TLB1CFG(NENTRY) */
+	mfspr	r11, SPRN_TLB1CFG
+	andi.	r11, r11, 0xfff
+
+	/* Extract MAS0(NV) */
+	andi.	r13, r12, 0xfff
+	addi	r13, r13, 1
+	cmpw	0, r13, r11
+	addi	r12, r12, 1
+
+	/* check if we need to wrap */
+	blt	7f
+
+	/* wrap back to first free tlbcam entry */
+	lis	r13, tlbcam_index@ha
+	lwz	r13, tlbcam_index@l(r13)
+	rlwimi	r12, r13, 0, 20, 31
+7:
+	mtspr   SPRN_MAS0,r12
+#endif /* CONFIG_E200 */
+
+	tlbwe
+
+	/* Done...restore registers and get out of here.  */
+	mfspr	r11, SPRN_SPRG7R
+	mtcr	r11
+	mfspr	r13, SPRN_SPRG5R
+	mfspr	r12, SPRN_SPRG4R
+	mfspr	r11, SPRN_SPRG1
+	mfspr	r10, SPRN_SPRG0
+	rfi					/* Force context change */
+
+#ifdef CONFIG_SPE
+/* Note that the SPE support is closely modeled after the AltiVec
+ * support.  Changes to one are likely to be applicable to the
+ * other!  */
+load_up_spe:
+/*
+ * Disable SPE for the task which had SPE previously,
+ * and save its SPE registers in its thread_struct.
+ * Enables SPE for use in the kernel on return.
+ * On SMP we know the SPE units are free, since we give it up every
+ * switch.  -- Kumar
+ */
+	mfmsr	r5
+	oris	r5,r5,MSR_SPE@h
+	mtmsr	r5			/* enable use of SPE now */
+	isync
+/*
+ * For SMP, we don't do lazy SPE switching because it just gets too
+ * horrendously complex, especially when a task switches from one CPU
+ * to another.  Instead we call giveup_spe in switch_to.
+ */
+#ifndef CONFIG_SMP
+	lis	r3,last_task_used_spe@ha
+	lwz	r4,last_task_used_spe@l(r3)
+	cmpi	0,r4,0
+	beq	1f
+	addi	r4,r4,THREAD	/* want THREAD of last_task_used_spe */
+	SAVE_32EVRS(0,r10,r4)
+   	evxor	evr10, evr10, evr10	/* clear out evr10 */
+	evmwumiaa evr10, evr10, evr10	/* evr10 <- ACC = 0 * 0 + ACC */
+	li	r5,THREAD_ACC
+   	evstddx	evr10, r4, r5		/* save off accumulator */
+	lwz	r5,PT_REGS(r4)
+	lwz	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+	lis	r10,MSR_SPE@h
+	andc	r4,r4,r10	/* disable SPE for previous task */
+	stw	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#endif /* CONFIG_SMP */
+	/* enable use of SPE after return */
+	oris	r9,r9,MSR_SPE@h
+	mfspr	r5,SPRN_SPRG3		/* current task's THREAD (phys) */
+	li	r4,1
+	li	r10,THREAD_ACC
+	stw	r4,THREAD_USED_SPE(r5)
+	evlddx	evr4,r10,r5
+	evmra	evr4,evr4
+	REST_32EVRS(0,r10,r5)
+#ifndef CONFIG_SMP
+	subi	r4,r5,THREAD
+	stw	r4,last_task_used_spe@l(r3)
+#endif /* CONFIG_SMP */
+	/* restore registers and return */
+2:	REST_4GPRS(3, r11)
+	lwz	r10,_CCR(r11)
+	REST_GPR(1, r11)
+	mtcr	r10
+	lwz	r10,_LINK(r11)
+	mtlr	r10
+	REST_GPR(10, r11)
+	mtspr	SPRN_SRR1,r9
+	mtspr	SPRN_SRR0,r12
+	REST_GPR(9, r11)
+	REST_GPR(12, r11)
+	lwz	r11,GPR11(r11)
+	SYNC
+	rfi
+
+/*
+ * SPE unavailable trap from kernel - print a message, but let
+ * the task use SPE in the kernel until it returns to user mode.
+ */
+KernelSPE:
+	lwz	r3,_MSR(r1)
+	oris	r3,r3,MSR_SPE@h
+	stw	r3,_MSR(r1)	/* enable use of SPE after return */
+	lis	r3,87f@h
+	ori	r3,r3,87f@l
+	mr	r4,r2		/* current */
+	lwz	r5,_NIP(r1)
+	bl	printk
+	b	ret_from_except
+87:	.string	"SPE used in kernel  (task=%p, pc=%x)  \n"
+	.align	4,0
+
+#endif /* CONFIG_SPE */
+
+/*
+ * Global functions
+ */
+
+/*
+ * extern void loadcam_entry(unsigned int index)
+ *
+ * Load TLBCAM[index] entry in to the L2 CAM MMU
+ */
+_GLOBAL(loadcam_entry)
+	lis	r4,TLBCAM@ha
+	addi	r4,r4,TLBCAM@l
+	mulli	r5,r3,20
+	add	r3,r5,r4
+	lwz	r4,0(r3)
+	mtspr	SPRN_MAS0,r4
+	lwz	r4,4(r3)
+	mtspr	SPRN_MAS1,r4
+	lwz	r4,8(r3)
+	mtspr	SPRN_MAS2,r4
+	lwz	r4,12(r3)
+	mtspr	SPRN_MAS3,r4
+	tlbwe
+	isync
+	blr
+
+/*
+ * extern void giveup_altivec(struct task_struct *prev)
+ *
+ * The e500 core does not have an AltiVec unit.
+ */
+_GLOBAL(giveup_altivec)
+	blr
+
+#ifdef CONFIG_SPE
+/*
+ * extern void giveup_spe(struct task_struct *prev)
+ *
+ */
+_GLOBAL(giveup_spe)
+	mfmsr	r5
+	oris	r5,r5,MSR_SPE@h
+	SYNC
+	mtmsr	r5			/* enable use of SPE now */
+	isync
+	cmpi	0,r3,0
+	beqlr-				/* if no previous owner, done */
+	addi	r3,r3,THREAD		/* want THREAD of task */
+	lwz	r5,PT_REGS(r3)
+	cmpi	0,r5,0
+	SAVE_32EVRS(0, r4, r3)
+   	evxor	evr6, evr6, evr6	/* clear out evr6 */
+	evmwumiaa evr6, evr6, evr6	/* evr6 <- ACC = 0 * 0 + ACC */
+	li	r4,THREAD_ACC
+   	evstddx	evr6, r4, r3		/* save off accumulator */
+	mfspr	r6,SPRN_SPEFSCR
+	stw	r6,THREAD_SPEFSCR(r3)	/* save spefscr register value */
+	beq	1f
+	lwz	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+	lis	r3,MSR_SPE@h
+	andc	r4,r4,r3		/* disable SPE for previous task */
+	stw	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#ifndef CONFIG_SMP
+	li	r5,0
+	lis	r4,last_task_used_spe@ha
+	stw	r5,last_task_used_spe@l(r4)
+#endif /* CONFIG_SMP */
+	blr
+#endif /* CONFIG_SPE */
+
+/*
+ * extern void giveup_fpu(struct task_struct *prev)
+ *
+ * Not all FSL Book-E cores have an FPU
+ */
+#ifndef CONFIG_PPC_FPU
+_GLOBAL(giveup_fpu)
+	blr
+#endif
+
+/*
+ * extern void abort(void)
+ *
+ * At present, this routine just applies a system reset.
+ */
+_GLOBAL(abort)
+	li	r13,0
+        mtspr   SPRN_DBCR0,r13		/* disable all debug events */
+	mfmsr	r13
+	ori	r13,r13,MSR_DE@l	/* Enable Debug Events */
+	mtmsr	r13
+        mfspr   r13,SPRN_DBCR0
+        lis	r13,(DBCR0_IDM|DBCR0_RST_CHIP)@h
+        mtspr   SPRN_DBCR0,r13
+
+_GLOBAL(set_context)
+
+#ifdef CONFIG_BDI_SWITCH
+	/* Context switch the PTE pointer for the Abatron BDI2000.
+	 * The PGDIR is the second parameter.
+	 */
+	lis	r5, abatron_pteptrs@h
+	ori	r5, r5, abatron_pteptrs@l
+	stw	r4, 0x4(r5)
+#endif
+	mtspr	SPRN_PID,r3
+	isync			/* Force context change */
+	blr
+
+/*
+ * We put a few things here that have to be page-aligned. This stuff
+ * goes at the beginning of the data segment, which is page-aligned.
+ */
+	.data
+	.align	12
+	.globl	sdata
+sdata:
+	.globl	empty_zero_page
+empty_zero_page:
+	.space	4096
+	.globl	swapper_pg_dir
+swapper_pg_dir:
+	.space	4096
+
+/* Reserved 4k for the critical exception stack & 4k for the machine
+ * check stack per CPU for kernel mode exceptions */
+	.section .bss
+        .align 12
+exception_stack_bottom:
+	.space	BOOKE_EXCEPTION_STACK_SIZE * NR_CPUS
+	.globl	exception_stack_top
+exception_stack_top:
+
+/*
+ * This space gets a copy of optional info passed to us by the bootstrap
+ * which is used to pass parameters into the kernel like root=/dev/sda1, etc.
+ */
+	.globl	cmd_line
+cmd_line:
+	.space	512
+
+/*
+ * Room for two PTE pointers, usually the kernel and current user pointers
+ * to their respective root page table.
+ */
+abatron_pteptrs:
+	.space	8
diff --git a/arch/ppc64/kernel/idle.c b/arch/powerpc/kernel/idle_64.c
index 954395d42636..b879d3057ef8 100644
--- a/arch/ppc64/kernel/idle.c
+++ b/arch/powerpc/kernel/idle_64.c
@@ -26,22 +26,18 @@
 #include <asm/processor.h>
 #include <asm/cputable.h>
 #include <asm/time.h>
-#include <asm/systemcfg.h>
 #include <asm/machdep.h>
+#include <asm/smp.h>
 
 extern void power4_idle(void);
 
-int default_idle(void)
+void default_idle(void)
 {
-	long oldval;
 	unsigned int cpu = smp_processor_id();
+	set_thread_flag(TIF_POLLING_NRFLAG);
 
 	while (1) {
-		oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED);
-
-		if (!oldval) {
-			set_thread_flag(TIF_POLLING_NRFLAG);
-
+		if (!need_resched()) {
 			while (!need_resched() && !cpu_is_offline(cpu)) {
 				ppc64_runlatch_off();
 
@@ -54,21 +50,18 @@ int default_idle(void)
 			}
 
 			HMT_medium();
-			clear_thread_flag(TIF_POLLING_NRFLAG);
-		} else {
-			set_need_resched();
 		}
 
 		ppc64_runlatch_on();
+		preempt_enable_no_resched();
 		schedule();
+		preempt_disable();
 		if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING)
 			cpu_die();
 	}
-
-	return 0;
 }
 
-int native_idle(void)
+void native_idle(void)
 {
 	while (1) {
 		ppc64_runlatch_off();
@@ -78,15 +71,15 @@ int native_idle(void)
 
 		if (need_resched()) {
 			ppc64_runlatch_on();
+			preempt_enable_no_resched();
 			schedule();
+			preempt_disable();
 		}
 
 		if (cpu_is_offline(smp_processor_id()) &&
 		    system_state == SYSTEM_RUNNING)
 			cpu_die();
 	}
-
-	return 0;
 }
 
 void cpu_idle(void)
diff --git a/arch/powerpc/kernel/idle_6xx.S b/arch/powerpc/kernel/idle_6xx.S
new file mode 100644
index 000000000000..444fdcc769f1
--- /dev/null
+++ b/arch/powerpc/kernel/idle_6xx.S
@@ -0,0 +1,233 @@
+/*
+ *  This file contains the power_save function for 6xx & 7xxx CPUs
+ *  rewritten in assembler
+ *
+ *  Warning ! This code assumes that if your machine has a 750fx
+ *  it will have PLL 1 set to low speed mode (used during NAP/DOZE).
+ *  if this is not the case some additional changes will have to
+ *  be done to check a runtime var (a bit like powersave-nap)
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+
+#undef DEBUG
+
+	.text
+
+/*
+ * Init idle, called at early CPU setup time from head.S for each CPU
+ * Make sure no rest of NAP mode remains in HID0, save default
+ * values for some CPU specific registers. Called with r24
+ * containing CPU number and r3 reloc offset
+ */
+_GLOBAL(init_idle_6xx)
+BEGIN_FTR_SECTION
+	mfspr	r4,SPRN_HID0
+	rlwinm	r4,r4,0,10,8	/* Clear NAP */
+	mtspr	SPRN_HID0, r4
+	b	1f
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
+	blr
+1:
+	slwi	r5,r24,2
+	add	r5,r5,r3
+BEGIN_FTR_SECTION
+	mfspr	r4,SPRN_MSSCR0
+	addis	r6,r5, nap_save_msscr0@ha
+	stw	r4,nap_save_msscr0@l(r6)
+END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
+BEGIN_FTR_SECTION
+	mfspr	r4,SPRN_HID1
+	addis	r6,r5,nap_save_hid1@ha
+	stw	r4,nap_save_hid1@l(r6)
+END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX)
+	blr
+
+/*
+ * Here is the power_save_6xx function. This could eventually be
+ * split into several functions & changing the function pointer
+ * depending on the various features.
+ */
+_GLOBAL(ppc6xx_idle)
+	/* Check if we can nap or doze, put HID0 mask in r3
+	 */
+	lis	r3, 0
+BEGIN_FTR_SECTION
+	lis	r3,HID0_DOZE@h
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
+BEGIN_FTR_SECTION
+	/* We must dynamically check for the NAP feature as it
+	 * can be cleared by CPU init after the fixups are done
+	 */
+	lis	r4,cur_cpu_spec@ha
+	lwz	r4,cur_cpu_spec@l(r4)
+	lwz	r4,CPU_SPEC_FEATURES(r4)
+	andi.	r0,r4,CPU_FTR_CAN_NAP
+	beq	1f
+	/* Now check if user or arch enabled NAP mode */
+	lis	r4,powersave_nap@ha
+	lwz	r4,powersave_nap@l(r4)
+	cmpwi	0,r4,0
+	beq	1f
+	lis	r3,HID0_NAP@h
+1:	
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
+	cmpwi	0,r3,0
+	beqlr
+
+	/* Clear MSR:EE */
+	mfmsr	r7
+	rlwinm	r0,r7,0,17,15
+	mtmsr	r0
+
+	/* Check current_thread_info()->flags */
+	rlwinm	r4,r1,0,0,18
+	lwz	r4,TI_FLAGS(r4)
+	andi.	r0,r4,_TIF_NEED_RESCHED
+	beq	1f
+	mtmsr	r7	/* out of line this ? */
+	blr
+1:	
+	/* Some pre-nap cleanups needed on some CPUs */
+	andis.	r0,r3,HID0_NAP@h
+	beq	2f
+BEGIN_FTR_SECTION
+	/* Disable L2 prefetch on some 745x and try to ensure
+	 * L2 prefetch engines are idle. As explained by errata
+	 * text, we can't be sure they are, we just hope very hard
+	 * that well be enough (sic !). At least I noticed Apple
+	 * doesn't even bother doing the dcbf's here...
+	 */
+	mfspr	r4,SPRN_MSSCR0
+	rlwinm	r4,r4,0,0,29
+	sync
+	mtspr	SPRN_MSSCR0,r4
+	sync
+	isync
+	lis	r4,KERNELBASE@h
+	dcbf	0,r4
+	dcbf	0,r4
+	dcbf	0,r4
+	dcbf	0,r4
+END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
+#ifdef DEBUG
+	lis	r6,nap_enter_count@ha
+	lwz	r4,nap_enter_count@l(r6)
+	addi	r4,r4,1
+	stw	r4,nap_enter_count@l(r6)
+#endif	
+2:
+BEGIN_FTR_SECTION
+	/* Go to low speed mode on some 750FX */
+	lis	r4,powersave_lowspeed@ha
+	lwz	r4,powersave_lowspeed@l(r4)
+	cmpwi	0,r4,0
+	beq	1f
+	mfspr	r4,SPRN_HID1
+	oris	r4,r4,0x0001
+	mtspr	SPRN_HID1,r4
+1:	
+END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX)
+
+	/* Go to NAP or DOZE now */	
+	mfspr	r4,SPRN_HID0
+	lis	r5,(HID0_NAP|HID0_SLEEP)@h
+BEGIN_FTR_SECTION
+	oris	r5,r5,HID0_DOZE@h
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
+	andc	r4,r4,r5
+	or	r4,r4,r3
+BEGIN_FTR_SECTION
+	oris	r4,r4,HID0_DPM@h	/* that should be done once for all  */
+END_FTR_SECTION_IFCLR(CPU_FTR_NO_DPM)
+	mtspr	SPRN_HID0,r4
+BEGIN_FTR_SECTION
+	DSSALL
+	sync
+END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+	ori	r7,r7,MSR_EE /* Could be ommited (already set) */
+	oris	r7,r7,MSR_POW@h
+	sync
+	isync
+	mtmsr	r7
+	isync
+	sync
+	blr
+	
+/*
+ * Return from NAP/DOZE mode, restore some CPU specific registers,
+ * we are called with DR/IR still off and r2 containing physical
+ * address of current.
+ */
+_GLOBAL(power_save_6xx_restore)
+	mfspr	r11,SPRN_HID0
+	rlwinm.	r11,r11,0,10,8	/* Clear NAP & copy NAP bit !state to cr1 EQ */
+	cror	4*cr1+eq,4*cr0+eq,4*cr0+eq
+BEGIN_FTR_SECTION
+	rlwinm	r11,r11,0,9,7	/* Clear DOZE */
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
+	mtspr	SPRN_HID0, r11
+
+#ifdef DEBUG
+	beq	cr1,1f
+	lis	r11,(nap_return_count-KERNELBASE)@ha
+	lwz	r9,nap_return_count@l(r11)
+	addi	r9,r9,1
+	stw	r9,nap_return_count@l(r11)
+1:
+#endif
+	
+	rlwinm	r9,r1,0,0,18
+	tophys(r9,r9)
+	lwz	r11,TI_CPU(r9)
+	slwi	r11,r11,2
+	/* Todo make sure all these are in the same page
+	 * and load r22 (@ha part + CPU offset) only once
+	 */
+BEGIN_FTR_SECTION
+	beq	cr1,1f
+	addis	r9,r11,(nap_save_msscr0-KERNELBASE)@ha
+	lwz	r9,nap_save_msscr0@l(r9)
+	mtspr	SPRN_MSSCR0, r9
+	sync
+	isync
+1:
+END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
+BEGIN_FTR_SECTION
+	addis	r9,r11,(nap_save_hid1-KERNELBASE)@ha
+	lwz	r9,nap_save_hid1@l(r9)
+	mtspr	SPRN_HID1, r9
+END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX)
+	b	transfer_to_handler_cont
+
+	.data
+
+_GLOBAL(nap_save_msscr0)
+	.space	4*NR_CPUS
+
+_GLOBAL(nap_save_hid1)
+	.space	4*NR_CPUS
+
+_GLOBAL(powersave_nap)
+	.long	0
+_GLOBAL(powersave_lowspeed)
+	.long	0
+
+#ifdef DEBUG
+_GLOBAL(nap_enter_count)
+	.space	4
+_GLOBAL(nap_return_count)
+	.space	4
+#endif
diff --git a/arch/ppc64/kernel/idle_power4.S b/arch/powerpc/kernel/idle_power4.S
index ca02afe2a795..1494e2f177f7 100644
--- a/arch/ppc64/kernel/idle_power4.S
+++ b/arch/powerpc/kernel/idle_power4.S
@@ -39,13 +39,13 @@ END_FTR_SECTION_IFCLR(CPU_FTR_CAN_NAP)
 	 * can be cleared by CPU init after the fixups are done
 	 */
 	LOADBASE(r3,cur_cpu_spec)
-	ld	r4,cur_cpu_spec@l(r3)
+	ld	r4,OFF(cur_cpu_spec)(r3)
 	ld	r4,CPU_SPEC_FEATURES(r4)
 	andi.	r0,r4,CPU_FTR_CAN_NAP
 	beqlr
 	/* Now check if user or arch enabled NAP mode */
 	LOADBASE(r3,powersave_nap)
-	lwz	r4,powersave_nap@l(r3)
+	lwz	r4,OFF(powersave_nap)(r3)
 	cmpwi	0,r4,0
 	beqlr
 
@@ -63,8 +63,8 @@ END_FTR_SECTION_IFCLR(CPU_FTR_CAN_NAP)
 	beq	1f
 	mtmsrd	r7	/* out of line this ? */
 	blr
-1:	
-	/* Go to NAP now */	
+1:
+	/* Go to NAP now */
 BEGIN_FTR_SECTION
 	DSSALL
 	sync
@@ -76,4 +76,3 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 	isync
 	sync
 	blr
-	
diff --git a/arch/ppc64/kernel/init_task.c b/arch/powerpc/kernel/init_task.c
index 941043ae040f..941043ae040f 100644
--- a/arch/ppc64/kernel/init_task.c
+++ b/arch/powerpc/kernel/init_task.c
diff --git a/arch/ppc64/kernel/ioctl32.c b/arch/powerpc/kernel/ioctl32.c
index a8005db23ec5..0fa3d27fef01 100644
--- a/arch/ppc64/kernel/ioctl32.c
+++ b/arch/powerpc/kernel/ioctl32.c
@@ -1,6 +1,6 @@
-/* 
+/*
  * ioctl32.c: Conversion between 32bit and 64bit native ioctls.
- * 
+ *
  * Based on sparc64 ioctl32.c by:
  *
  * Copyright (C) 1997-2000  Jakub Jelinek  (jakub@redhat.com)
@@ -39,12 +39,6 @@ IOCTL_TABLE_START
 #include <linux/compat_ioctl.h>
 #define DECLARES
 #include "compat_ioctl.c"
-COMPATIBLE_IOCTL(TIOCSTART)
-COMPATIBLE_IOCTL(TIOCSTOP)
-COMPATIBLE_IOCTL(TIOCSLTC)
-/* Little p (/dev/rtc, /dev/envctrl, etc.) */
-COMPATIBLE_IOCTL(_IOR('p', 20, int[7])) /* RTCGET */
-COMPATIBLE_IOCTL(_IOW('p', 21, int[7])) /* RTCSET */
 
 IOCTL_TABLE_END
 
diff --git a/arch/ppc64/kernel/iomap.c b/arch/powerpc/kernel/iomap.c
index 6160c8dbb7c5..6160c8dbb7c5 100644
--- a/arch/ppc64/kernel/iomap.c
+++ b/arch/powerpc/kernel/iomap.c
diff --git a/arch/ppc64/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index 9032b6bfe036..4d9b4388918b 100644
--- a/arch/ppc64/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -519,7 +519,7 @@ void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle,
  * to the dma address (mapping) of the first page.
  */
 void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size,
-		dma_addr_t *dma_handle, unsigned int __nocast flag)
+		dma_addr_t *dma_handle, gfp_t flag)
 {
 	void *ret = NULL;
 	dma_addr_t mapping;
diff --git a/arch/ppc64/kernel/irq.c b/arch/powerpc/kernel/irq.c
index f41afe545045..5a71ed9612fe 100644
--- a/arch/ppc64/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -5,12 +5,12 @@
  *    Copyright (C) 1992 Linus Torvalds
  *  Adapted from arch/i386 by Gary Thomas
  *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *  Updated and modified by Cort Dougan (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Cort Dougan
+ *  Updated and modified by Cort Dougan <cort@fsmlabs.com>
+ *    Copyright (C) 1996-2001 Cort Dougan
  *  Adapted for Power Macintosh by Paul Mackerras
  *    Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au)
  *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- * 
+ *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version
@@ -21,6 +21,14 @@
  * instead of just grabbing them. Thus setups with different IRQ numbers
  * shouldn't result in any weird surprises, and installing new handlers
  * should be easier.
+ *
+ * The MPC8xx has an interrupt mask in the SIU.  If a bit is set, the
+ * interrupt is _enabled_.  As expected, IRQ0 is bit 0 in the 32-bit
+ * mask register (of which only 16 are defined), hence the weird shifting
+ * and complement of the cached_irq_mask.  I want to be able to stuff
+ * this right into the SIU SMASK register.
+ * Many of the prep/chrp functions are conditional compiled on CONFIG_8xx
+ * to reduce code space and undefined function references.
  */
 
 #include <linux/errno.h>
@@ -29,6 +37,7 @@
 #include <linux/kernel_stat.h>
 #include <linux/signal.h>
 #include <linux/sched.h>
+#include <linux/ptrace.h>
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
 #include <linux/timex.h>
@@ -40,9 +49,13 @@
 #include <linux/irq.h>
 #include <linux/proc_fs.h>
 #include <linux/random.h>
-#include <linux/kallsyms.h>
+#include <linux/seq_file.h>
+#include <linux/cpumask.h>
 #include <linux/profile.h>
 #include <linux/bitops.h>
+#ifdef CONFIG_PPC64
+#include <linux/kallsyms.h>
+#endif
 
 #include <asm/uaccess.h>
 #include <asm/system.h>
@@ -52,35 +65,58 @@
 #include <asm/cache.h>
 #include <asm/prom.h>
 #include <asm/ptrace.h>
-#include <asm/iSeries/ItLpQueue.h>
 #include <asm/machdep.h>
+#ifdef CONFIG_PPC64
+#include <asm/iseries/it_lp_queue.h>
 #include <asm/paca.h>
+#endif
 
-#ifdef CONFIG_SMP
-extern void iSeries_smp_message_recv( struct pt_regs * );
+int __irq_offset_value;
+#ifdef CONFIG_PPC32
+EXPORT_SYMBOL(__irq_offset_value);
+#endif
+
+static int ppc_spurious_interrupts;
+
+#if defined(CONFIG_PPC_ISERIES) && defined(CONFIG_SMP)
+extern void iSeries_smp_message_recv(struct pt_regs *);
 #endif
 
-extern irq_desc_t irq_desc[NR_IRQS];
+#ifdef CONFIG_PPC32
+#define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
+
+unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
+atomic_t ppc_n_lost_interrupts;
+
+#ifdef CONFIG_TAU_INT
+extern int tau_initialized;
+extern int tau_interrupts(int);
+#endif
+
+#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE)
+extern atomic_t ipi_recv;
+extern atomic_t ipi_sent;
+#endif
+#endif /* CONFIG_PPC32 */
+
+#ifdef CONFIG_PPC64
 EXPORT_SYMBOL(irq_desc);
 
 int distribute_irqs = 1;
-int __irq_offset_value;
-int ppc_spurious_interrupts;
 u64 ppc64_interrupt_controller;
+#endif /* CONFIG_PPC64 */
 
 int show_interrupts(struct seq_file *p, void *v)
 {
-	int i = *(loff_t *) v, j;
-	struct irqaction * action;
+	int i = *(loff_t *)v, j;
+	struct irqaction *action;
 	irq_desc_t *desc;
 	unsigned long flags;
 
 	if (i == 0) {
-		seq_printf(p, "           ");
-		for (j=0; j<NR_CPUS; j++) {
-			if (cpu_online(j))
-				seq_printf(p, "CPU%d       ",j);
-		}
+		seq_puts(p, "           ");
+		for_each_online_cpu(j)
+			seq_printf(p, "CPU%d       ", j);
 		seq_putc(p, '\n');
 	}
 
@@ -92,26 +128,41 @@ int show_interrupts(struct seq_file *p, void *v)
 			goto skip;
 		seq_printf(p, "%3d: ", i);
 #ifdef CONFIG_SMP
-		for (j = 0; j < NR_CPUS; j++) {
-			if (cpu_online(j))
-				seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
-		}
+		for_each_online_cpu(j)
+			seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
 #else
 		seq_printf(p, "%10u ", kstat_irqs(i));
 #endif /* CONFIG_SMP */
 		if (desc->handler)
-			seq_printf(p, " %s ", desc->handler->typename );
+			seq_printf(p, " %s ", desc->handler->typename);
 		else
-			seq_printf(p, "  None      ");
+			seq_puts(p, "  None      ");
 		seq_printf(p, "%s", (desc->status & IRQ_LEVEL) ? "Level " : "Edge  ");
-		seq_printf(p, "    %s",action->name);
-		for (action=action->next; action; action = action->next)
+		seq_printf(p, "    %s", action->name);
+		for (action = action->next; action; action = action->next)
 			seq_printf(p, ", %s", action->name);
 		seq_putc(p, '\n');
 skip:
 		spin_unlock_irqrestore(&desc->lock, flags);
-	} else if (i == NR_IRQS)
+	} else if (i == NR_IRQS) {
+#ifdef CONFIG_PPC32
+#ifdef CONFIG_TAU_INT
+		if (tau_initialized){
+			seq_puts(p, "TAU: ");
+			for (j = 0; j < NR_CPUS; j++)
+				if (cpu_online(j))
+					seq_printf(p, "%10u ", tau_interrupts(j));
+			seq_puts(p, "  PowerPC             Thermal Assist (cpu temp)\n");
+		}
+#endif
+#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE)
+		/* should this be per processor send/receive? */
+		seq_printf(p, "IPI (recv/sent): %10u/%u\n",
+				atomic_read(&ipi_recv), atomic_read(&ipi_sent));
+#endif
+#endif /* CONFIG_PPC32 */
 		seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts);
+	}
 	return 0;
 }
 
@@ -144,126 +195,6 @@ void fixup_irqs(cpumask_t map)
 }
 #endif
 
-extern int noirqdebug;
-
-/*
- * Eventually, this should take an array of interrupts and an array size
- * so it can dispatch multiple interrupts.
- */
-void ppc_irq_dispatch_handler(struct pt_regs *regs, int irq)
-{
-	int status;
-	struct irqaction *action;
-	int cpu = smp_processor_id();
-	irq_desc_t *desc = get_irq_desc(irq);
-	irqreturn_t action_ret;
-#ifdef CONFIG_IRQSTACKS
-	struct thread_info *curtp, *irqtp;
-#endif
-
-	kstat_cpu(cpu).irqs[irq]++;
-
-	if (desc->status & IRQ_PER_CPU) {
-		/* no locking required for CPU-local interrupts: */
-		ack_irq(irq);
-		action_ret = handle_IRQ_event(irq, regs, desc->action);
-		desc->handler->end(irq);
-		return;
-	}
-
-	spin_lock(&desc->lock);
-	ack_irq(irq);	
-	/*
-	   REPLAY is when Linux resends an IRQ that was dropped earlier
-	   WAITING is used by probe to mark irqs that are being tested
-	   */
-	status = desc->status & ~(IRQ_REPLAY | IRQ_WAITING);
-	status |= IRQ_PENDING; /* we _want_ to handle it */
-
-	/*
-	 * If the IRQ is disabled for whatever reason, we cannot
-	 * use the action we have.
-	 */
-	action = NULL;
-	if (likely(!(status & (IRQ_DISABLED | IRQ_INPROGRESS)))) {
-		action = desc->action;
-		if (!action || !action->handler) {
-			ppc_spurious_interrupts++;
-			printk(KERN_DEBUG "Unhandled interrupt %x, disabled\n", irq);
-			/* We can't call disable_irq here, it would deadlock */
-			if (!desc->depth)
-				desc->depth = 1;
-			desc->status |= IRQ_DISABLED;
-			/* This is not a real spurrious interrupt, we
-			 * have to eoi it, so we jump to out
-			 */
-			mask_irq(irq);
-			goto out;
-		}
-		status &= ~IRQ_PENDING; /* we commit to handling */
-		status |= IRQ_INPROGRESS; /* we are handling it */
-	}
-	desc->status = status;
-
-	/*
-	 * If there is no IRQ handler or it was disabled, exit early.
-	   Since we set PENDING, if another processor is handling
-	   a different instance of this same irq, the other processor
-	   will take care of it.
-	 */
-	if (unlikely(!action))
-		goto out;
-
-	/*
-	 * Edge triggered interrupts need to remember
-	 * pending events.
-	 * This applies to any hw interrupts that allow a second
-	 * instance of the same irq to arrive while we are in do_IRQ
-	 * or in the handler. But the code here only handles the _second_
-	 * instance of the irq, not the third or fourth. So it is mostly
-	 * useful for irq hardware that does not mask cleanly in an
-	 * SMP environment.
-	 */
-	for (;;) {
-		spin_unlock(&desc->lock);
-
-#ifdef CONFIG_IRQSTACKS
-		/* Switch to the irq stack to handle this */
-		curtp = current_thread_info();
-		irqtp = hardirq_ctx[smp_processor_id()];
-		if (curtp != irqtp) {
-			irqtp->task = curtp->task;
-			irqtp->flags = 0;
-			action_ret = call_handle_IRQ_event(irq, regs, action, irqtp);
-			irqtp->task = NULL;
-			if (irqtp->flags)
-				set_bits(irqtp->flags, &curtp->flags);
-		} else
-#endif
-			action_ret = handle_IRQ_event(irq, regs, action);
-
-		spin_lock(&desc->lock);
-		if (!noirqdebug)
-			note_interrupt(irq, desc, action_ret, regs);
-		if (likely(!(desc->status & IRQ_PENDING)))
-			break;
-		desc->status &= ~IRQ_PENDING;
-	}
-out:
-	desc->status &= ~IRQ_INPROGRESS;
-	/*
-	 * The ->end() handler has to deal with interrupts which got
-	 * disabled while the handler was running.
-	 */
-	if (desc->handler) {
-		if (desc->handler->end)
-			desc->handler->end(irq);
-		else if (desc->handler->enable)
-			desc->handler->enable(irq);
-	}
-	spin_unlock(&desc->lock);
-}
-
 #ifdef CONFIG_PPC_ISERIES
 void do_IRQ(struct pt_regs *regs)
 {
@@ -310,8 +241,11 @@ void do_IRQ(struct pt_regs *regs)
 void do_IRQ(struct pt_regs *regs)
 {
 	int irq;
+#ifdef CONFIG_IRQSTACKS
+	struct thread_info *curtp, *irqtp;
+#endif
 
-	irq_enter();
+        irq_enter();
 
 #ifdef CONFIG_DEBUG_STACKOVERFLOW
 	/* Debugging check for stack overflow: is there less than 2KB free? */
@@ -328,20 +262,44 @@ void do_IRQ(struct pt_regs *regs)
 	}
 #endif
 
+	/*
+	 * Every platform is required to implement ppc_md.get_irq.
+	 * This function will either return an irq number or -1 to
+	 * indicate there are no more pending.
+	 * The value -2 is for buggy hardware and means that this IRQ
+	 * has already been handled. -- Tom
+	 */
 	irq = ppc_md.get_irq(regs);
 
-	if (irq >= 0)
-		ppc_irq_dispatch_handler(regs, irq);
-	else
-		/* That's not SMP safe ... but who cares ? */
-		ppc_spurious_interrupts++;
-
-	irq_exit();
+	if (irq >= 0) {
+#ifdef CONFIG_IRQSTACKS
+		/* Switch to the irq stack to handle this */
+		curtp = current_thread_info();
+		irqtp = hardirq_ctx[smp_processor_id()];
+		if (curtp != irqtp) {
+			irqtp->task = curtp->task;
+			irqtp->flags = 0;
+			call___do_IRQ(irq, regs, irqtp);
+			irqtp->task = NULL;
+			if (irqtp->flags)
+				set_bits(irqtp->flags, &curtp->flags);
+		} else
+#endif
+			__do_IRQ(irq, regs);
+	} else
+#ifdef CONFIG_PPC32
+		if (irq != -2)
+#endif
+			/* That's not SMP safe ... but who cares ? */
+			ppc_spurious_interrupts++;
+        irq_exit();
 }
+
 #endif	/* CONFIG_PPC_ISERIES */
 
 void __init init_IRQ(void)
 {
+#ifdef CONFIG_PPC64
 	static int once = 0;
 
 	if (once)
@@ -349,11 +307,14 @@ void __init init_IRQ(void)
 
 	once++;
 
+#endif
 	ppc_md.init_IRQ();
+#ifdef CONFIG_PPC64
 	irq_ctx_init();
+#endif
 }
 
-#ifndef CONFIG_PPC_ISERIES
+#ifdef CONFIG_PPC64
 /*
  * Virtual IRQ mapping code, used on systems with XICS interrupt controllers.
  */
@@ -392,7 +353,7 @@ int virt_irq_create_mapping(unsigned int real_irq)
 	if (ppc64_interrupt_controller == IC_OPEN_PIC)
 		return real_irq;	/* no mapping for openpic (for now) */
 
-	if (ppc64_interrupt_controller == IC_BPA_IIC)
+	if (ppc64_interrupt_controller == IC_CELL_PIC)
 		return real_irq;	/* no mapping for iic either */
 
 	/* don't map interrupts < MIN_VIRT_IRQ */
@@ -462,8 +423,6 @@ unsigned int real_irq_to_virt_slowpath(unsigned int real_irq)
 
 }
 
-#endif /* CONFIG_PPC_ISERIES */
-
 #ifdef CONFIG_IRQSTACKS
 struct thread_info *softirq_ctx[NR_CPUS];
 struct thread_info *hardirq_ctx[NR_CPUS];
@@ -517,3 +476,4 @@ static int __init setup_noirqdistrib(char *str)
 }
 
 __setup("noirqdistrib", setup_noirqdistrib);
+#endif /* CONFIG_PPC64 */
diff --git a/arch/ppc64/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c
index 7e80d49c589a..511af54e6230 100644
--- a/arch/ppc64/kernel/kprobes.c
+++ b/arch/powerpc/kernel/kprobes.c
@@ -30,19 +30,14 @@
 #include <linux/config.h>
 #include <linux/kprobes.h>
 #include <linux/ptrace.h>
-#include <linux/spinlock.h>
 #include <linux/preempt.h>
 #include <asm/cacheflush.h>
 #include <asm/kdebug.h>
 #include <asm/sstep.h>
 
 static DECLARE_MUTEX(kprobe_mutex);
-
-static struct kprobe *current_kprobe;
-static unsigned long kprobe_status, kprobe_saved_msr;
-static struct kprobe *kprobe_prev;
-static unsigned long kprobe_status_prev, kprobe_saved_msr_prev;
-static struct pt_regs jprobe_saved_regs;
+DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
+DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
 
 int __kprobes arch_prepare_kprobe(struct kprobe *p)
 {
@@ -59,9 +54,9 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
 
 	/* insn must be on a special executable page on ppc64 */
 	if (!ret) {
-		up(&kprobe_mutex);
-		p->ainsn.insn = get_insn_slot();
 		down(&kprobe_mutex);
+		p->ainsn.insn = get_insn_slot();
+		up(&kprobe_mutex);
 		if (!p->ainsn.insn)
 			ret = -ENOMEM;
 	}
@@ -90,9 +85,9 @@ void __kprobes arch_disarm_kprobe(struct kprobe *p)
 
 void __kprobes arch_remove_kprobe(struct kprobe *p)
 {
-	up(&kprobe_mutex);
-	free_insn_slot(p->ainsn.insn);
 	down(&kprobe_mutex);
+	free_insn_slot(p->ainsn.insn);
+	up(&kprobe_mutex);
 }
 
 static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
@@ -108,20 +103,28 @@ static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
 		regs->nip = (unsigned long)p->ainsn.insn;
 }
 
-static inline void save_previous_kprobe(void)
+static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb)
+{
+	kcb->prev_kprobe.kp = kprobe_running();
+	kcb->prev_kprobe.status = kcb->kprobe_status;
+	kcb->prev_kprobe.saved_msr = kcb->kprobe_saved_msr;
+}
+
+static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb)
 {
-	kprobe_prev = current_kprobe;
-	kprobe_status_prev = kprobe_status;
-	kprobe_saved_msr_prev = kprobe_saved_msr;
+	__get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp;
+	kcb->kprobe_status = kcb->prev_kprobe.status;
+	kcb->kprobe_saved_msr = kcb->prev_kprobe.saved_msr;
 }
 
-static inline void restore_previous_kprobe(void)
+static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
+				struct kprobe_ctlblk *kcb)
 {
-	current_kprobe = kprobe_prev;
-	kprobe_status = kprobe_status_prev;
-	kprobe_saved_msr = kprobe_saved_msr_prev;
+	__get_cpu_var(current_kprobe) = p;
+	kcb->kprobe_saved_msr = regs->msr;
 }
 
+/* Called with kretprobe_lock held */
 void __kprobes arch_prepare_kretprobe(struct kretprobe *rp,
 				      struct pt_regs *regs)
 {
@@ -145,19 +148,24 @@ static inline int kprobe_handler(struct pt_regs *regs)
 	struct kprobe *p;
 	int ret = 0;
 	unsigned int *addr = (unsigned int *)regs->nip;
+	struct kprobe_ctlblk *kcb;
+
+	/*
+	 * We don't want to be preempted for the entire
+	 * duration of kprobe processing
+	 */
+	preempt_disable();
+	kcb = get_kprobe_ctlblk();
 
 	/* Check we're not actually recursing */
 	if (kprobe_running()) {
-		/* We *are* holding lock here, so this is safe.
-		   Disarm the probe we just hit, and ignore it. */
 		p = get_kprobe(addr);
 		if (p) {
 			kprobe_opcode_t insn = *p->ainsn.insn;
-			if (kprobe_status == KPROBE_HIT_SS &&
+			if (kcb->kprobe_status == KPROBE_HIT_SS &&
 					is_trap(insn)) {
 				regs->msr &= ~MSR_SE;
-				regs->msr |= kprobe_saved_msr;
-				unlock_kprobes();
+				regs->msr |= kcb->kprobe_saved_msr;
 				goto no_kprobe;
 			}
 			/* We have reentered the kprobe_handler(), since
@@ -166,27 +174,24 @@ static inline int kprobe_handler(struct pt_regs *regs)
 			 * just single step on the instruction of the new probe
 			 * without calling any user handlers.
 			 */
-			save_previous_kprobe();
-			current_kprobe = p;
-			kprobe_saved_msr = regs->msr;
+			save_previous_kprobe(kcb);
+			set_current_kprobe(p, regs, kcb);
+			kcb->kprobe_saved_msr = regs->msr;
 			p->nmissed++;
 			prepare_singlestep(p, regs);
-			kprobe_status = KPROBE_REENTER;
+			kcb->kprobe_status = KPROBE_REENTER;
 			return 1;
 		} else {
-			p = current_kprobe;
+			p = __get_cpu_var(current_kprobe);
 			if (p->break_handler && p->break_handler(p, regs)) {
 				goto ss_probe;
 			}
 		}
-		/* If it's not ours, can't be delete race, (we hold lock). */
 		goto no_kprobe;
 	}
 
-	lock_kprobes();
 	p = get_kprobe(addr);
 	if (!p) {
-		unlock_kprobes();
 		if (*addr != BREAKPOINT_INSTRUCTION) {
 			/*
 			 * PowerPC has multiple variants of the "trap"
@@ -209,24 +214,19 @@ static inline int kprobe_handler(struct pt_regs *regs)
 		goto no_kprobe;
 	}
 
-	kprobe_status = KPROBE_HIT_ACTIVE;
-	current_kprobe = p;
-	kprobe_saved_msr = regs->msr;
+	kcb->kprobe_status = KPROBE_HIT_ACTIVE;
+	set_current_kprobe(p, regs, kcb);
 	if (p->pre_handler && p->pre_handler(p, regs))
 		/* handler has already set things up, so skip ss setup */
 		return 1;
 
 ss_probe:
 	prepare_singlestep(p, regs);
-	kprobe_status = KPROBE_HIT_SS;
-	/*
-	 * This preempt_disable() matches the preempt_enable_no_resched()
-	 * in post_kprobe_handler().
-	 */
-	preempt_disable();
+	kcb->kprobe_status = KPROBE_HIT_SS;
 	return 1;
 
 no_kprobe:
+	preempt_enable_no_resched();
 	return ret;
 }
 
@@ -251,9 +251,10 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
         struct kretprobe_instance *ri = NULL;
         struct hlist_head *head;
         struct hlist_node *node, *tmp;
-	unsigned long orig_ret_address = 0;
+	unsigned long flags, orig_ret_address = 0;
 	unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline;
 
+	spin_lock_irqsave(&kretprobe_lock, flags);
         head = kretprobe_inst_table_head(current);
 
 	/*
@@ -292,12 +293,14 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 	BUG_ON(!orig_ret_address || (orig_ret_address == trampoline_address));
 	regs->nip = orig_ret_address;
 
-	unlock_kprobes();
+	reset_current_kprobe();
+	spin_unlock_irqrestore(&kretprobe_lock, flags);
+	preempt_enable_no_resched();
 
         /*
          * By returning a non-zero value, we are telling
-         * kprobe_handler() that we have handled unlocking
-         * and re-enabling preemption.
+         * kprobe_handler() that we don't want the post_handler
+         * to run (and have re-enabled preemption)
          */
         return 1;
 }
@@ -323,23 +326,26 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs)
 
 static inline int post_kprobe_handler(struct pt_regs *regs)
 {
-	if (!kprobe_running())
+	struct kprobe *cur = kprobe_running();
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	if (!cur)
 		return 0;
 
-	if ((kprobe_status != KPROBE_REENTER) && current_kprobe->post_handler) {
-		kprobe_status = KPROBE_HIT_SSDONE;
-		current_kprobe->post_handler(current_kprobe, regs, 0);
+	if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) {
+		kcb->kprobe_status = KPROBE_HIT_SSDONE;
+		cur->post_handler(cur, regs, 0);
 	}
 
-	resume_execution(current_kprobe, regs);
-	regs->msr |= kprobe_saved_msr;
+	resume_execution(cur, regs);
+	regs->msr |= kcb->kprobe_saved_msr;
 
 	/*Restore back the original saved kprobes variables and continue. */
-	if (kprobe_status == KPROBE_REENTER) {
-		restore_previous_kprobe();
+	if (kcb->kprobe_status == KPROBE_REENTER) {
+		restore_previous_kprobe(kcb);
 		goto out;
 	}
-	unlock_kprobes();
+	reset_current_kprobe();
 out:
 	preempt_enable_no_resched();
 
@@ -354,19 +360,20 @@ out:
 	return 1;
 }
 
-/* Interrupts disabled, kprobe_lock held. */
 static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr)
 {
-	if (current_kprobe->fault_handler
-	    && current_kprobe->fault_handler(current_kprobe, regs, trapnr))
+	struct kprobe *cur = kprobe_running();
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr))
 		return 1;
 
-	if (kprobe_status & KPROBE_HIT_SS) {
-		resume_execution(current_kprobe, regs);
+	if (kcb->kprobe_status & KPROBE_HIT_SS) {
+		resume_execution(cur, regs);
 		regs->msr &= ~MSR_SE;
-		regs->msr |= kprobe_saved_msr;
+		regs->msr |= kcb->kprobe_saved_msr;
 
-		unlock_kprobes();
+		reset_current_kprobe();
 		preempt_enable_no_resched();
 	}
 	return 0;
@@ -381,11 +388,6 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
 	struct die_args *args = (struct die_args *)data;
 	int ret = NOTIFY_DONE;
 
-	/*
-	 * Interrupts are not disabled here.  We need to disable
-	 * preemption, because kprobe_running() uses smp_processor_id().
-	 */
-	preempt_disable();
 	switch (val) {
 	case DIE_BPT:
 		if (kprobe_handler(args->regs))
@@ -395,24 +397,26 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
 		if (post_kprobe_handler(args->regs))
 			ret = NOTIFY_STOP;
 		break;
-	case DIE_GPF:
 	case DIE_PAGE_FAULT:
+		/* kprobe_running() needs smp_processor_id() */
+		preempt_disable();
 		if (kprobe_running() &&
 		    kprobe_fault_handler(args->regs, args->trapnr))
 			ret = NOTIFY_STOP;
+		preempt_enable();
 		break;
 	default:
 		break;
 	}
-	preempt_enable_no_resched();
 	return ret;
 }
 
 int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
 {
 	struct jprobe *jp = container_of(p, struct jprobe, kp);
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
 
-	memcpy(&jprobe_saved_regs, regs, sizeof(struct pt_regs));
+	memcpy(&kcb->jprobe_saved_regs, regs, sizeof(struct pt_regs));
 
 	/* setup return addr to the jprobe handler routine */
 	regs->nip = (unsigned long)(((func_descr_t *)jp->entry)->entry);
@@ -432,12 +436,15 @@ void __kprobes jprobe_return_end(void)
 
 int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
 {
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
 	/*
 	 * FIXME - we should ideally be validating that we got here 'cos
 	 * of the "trap" in jprobe_return() above, before restoring the
 	 * saved regs...
 	 */
-	memcpy(regs, &jprobe_saved_regs, sizeof(struct pt_regs));
+	memcpy(regs, &kcb->jprobe_saved_regs, sizeof(struct pt_regs));
+	preempt_enable_no_resched();
 	return 1;
 }
 
diff --git a/arch/ppc64/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index cae19bbd5acd..9dda16ccde78 100644
--- a/arch/ppc64/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -26,47 +26,22 @@
 #include <linux/init.h>
 #include <linux/seq_file.h>
 #include <asm/uaccess.h>
-#include <asm/iSeries/HvLpConfig.h>
+#include <asm/iseries/hv_lp_config.h>
 #include <asm/lppaca.h>
 #include <asm/hvcall.h>
 #include <asm/firmware.h>
 #include <asm/rtas.h>
 #include <asm/system.h>
 #include <asm/time.h>
-#include <asm/iSeries/ItExtVpdPanel.h>
+#include <asm/iseries/it_exp_vpd_panel.h>
 #include <asm/prom.h>
+#include <asm/vdso_datapage.h>
 
 #define MODULE_VERS "1.6"
 #define MODULE_NAME "lparcfg"
 
 /* #define LPARCFG_DEBUG */
 
-/* find a better place for this function... */
-void log_plpar_hcall_return(unsigned long rc, char *tag)
-{
-	if (rc == 0)		/* success, return */
-		return;
-/* check for null tag ? */
-	if (rc == H_Hardware)
-		printk(KERN_INFO
-		       "plpar-hcall (%s) failed with hardware fault\n", tag);
-	else if (rc == H_Function)
-		printk(KERN_INFO
-		       "plpar-hcall (%s) failed; function not allowed\n", tag);
-	else if (rc == H_Authority)
-		printk(KERN_INFO
-		       "plpar-hcall (%s) failed; not authorized to this function\n",
-		       tag);
-	else if (rc == H_Parameter)
-		printk(KERN_INFO "plpar-hcall (%s) failed; Bad parameter(s)\n",
-		       tag);
-	else
-		printk(KERN_INFO
-		       "plpar-hcall (%s) failed with unexpected rc(0x%lx)\n",
-		       tag, rc);
-
-}
-
 static struct proc_dir_entry *proc_ppc64_lparcfg;
 #define LPARCFG_BUFF_SIZE 4096
 
@@ -96,7 +71,7 @@ static unsigned long get_purr(void)
 
 #define lparcfg_write NULL
 
-/* 
+/*
  * Methods used to fetch LPAR data when running on an iSeries platform.
  */
 static int lparcfg_data(struct seq_file *m, void *v)
@@ -168,16 +143,41 @@ static int lparcfg_data(struct seq_file *m, void *v)
 #endif				/* CONFIG_PPC_ISERIES */
 
 #ifdef CONFIG_PPC_PSERIES
-/* 
+/*
  * Methods used to fetch LPAR data when running on a pSeries platform.
  */
+/* find a better place for this function... */
+static void log_plpar_hcall_return(unsigned long rc, char *tag)
+{
+	if (rc == 0)		/* success, return */
+		return;
+/* check for null tag ? */
+	if (rc == H_Hardware)
+		printk(KERN_INFO
+		       "plpar-hcall (%s) failed with hardware fault\n", tag);
+	else if (rc == H_Function)
+		printk(KERN_INFO
+		       "plpar-hcall (%s) failed; function not allowed\n", tag);
+	else if (rc == H_Authority)
+		printk(KERN_INFO
+		       "plpar-hcall (%s) failed; not authorized to this function\n",
+		       tag);
+	else if (rc == H_Parameter)
+		printk(KERN_INFO "plpar-hcall (%s) failed; Bad parameter(s)\n",
+		       tag);
+	else
+		printk(KERN_INFO
+		       "plpar-hcall (%s) failed with unexpected rc(0x%lx)\n",
+		       tag, rc);
+
+}
 
 /*
  * H_GET_PPP hcall returns info in 4 parms.
  *  entitled_capacity,unallocated_capacity,
  *  aggregation, resource_capability).
  *
- *  R4 = Entitled Processor Capacity Percentage. 
+ *  R4 = Entitled Processor Capacity Percentage.
  *  R5 = Unallocated Processor Capacity Percentage.
  *  R6 (AABBCCDDEEFFGGHH).
  *      XXXX - reserved (0)
@@ -190,7 +190,7 @@ static int lparcfg_data(struct seq_file *m, void *v)
  *          XX - variable processor Capacity Weight
  *            XX - Unallocated Variable Processor Capacity Weight.
  *              XXXX - Active processors in Physical Processor Pool.
- *                  XXXX  - Processors active on platform. 
+ *                  XXXX  - Processors active on platform.
  */
 static unsigned int h_get_ppp(unsigned long *entitled,
 			      unsigned long *unallocated,
@@ -212,11 +212,10 @@ static void h_pic(unsigned long *pool_idle_time, unsigned long *num_procs)
 	unsigned long dummy;
 	rc = plpar_hcall(H_PIC, 0, 0, 0, 0, pool_idle_time, num_procs, &dummy);
 
-	log_plpar_hcall_return(rc, "H_PIC");
+	if (rc != H_Authority)
+		log_plpar_hcall_return(rc, "H_PIC");
 }
 
-static unsigned long get_purr(void);
-
 /* Track sum of all purrs across all processors. This is used to further */
 /* calculate usage values by different applications                       */
 
@@ -273,7 +272,7 @@ static void parse_system_parameter_string(struct seq_file *m)
 		if (!workbuffer) {
 			printk(KERN_ERR "%s %s kmalloc failure at line %d \n",
 			       __FILE__, __FUNCTION__, __LINE__);
-			kfree(local_buffer);			
+			kfree(local_buffer);
 			return;
 		}
 #ifdef LPARCFG_DEBUG
@@ -318,8 +317,6 @@ static void parse_system_parameter_string(struct seq_file *m)
 	kfree(local_buffer);
 }
 
-static int lparcfg_count_active_processors(void);
-
 /* Return the number of processors in the system.
  * This function reads through the device tree and counts
  * the virtual processors, this does not include threads.
@@ -371,7 +368,7 @@ static int lparcfg_data(struct seq_file *m, void *v)
 	lrdrp = (int *)get_property(rtas_node, "ibm,lrdr-capacity", NULL);
 
 	if (lrdrp == NULL) {
-		partition_potential_processors = systemcfg->processorCount;
+		partition_potential_processors = vdso_data->processorCount;
 	} else {
 		partition_potential_processors = *(lrdrp + 4);
 	}
@@ -547,7 +544,7 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf,
 		retval = -EIO;
 	}
 
-      out:
+out:
 	kfree(kbuf);
 	return retval;
 }
@@ -560,10 +557,10 @@ static int lparcfg_open(struct inode *inode, struct file *file)
 }
 
 struct file_operations lparcfg_fops = {
-      .owner	= THIS_MODULE,
-      .read	= seq_read,
-      .open	= lparcfg_open,
-      .release	= single_release,
+	.owner		= THIS_MODULE,
+	.read		= seq_read,
+	.open		= lparcfg_open,
+	.release	= single_release,
 };
 
 int __init lparcfg_init(void)
@@ -599,9 +596,7 @@ int __init lparcfg_init(void)
 void __exit lparcfg_cleanup(void)
 {
 	if (proc_ppc64_lparcfg) {
-		if (proc_ppc64_lparcfg->data) {
-			kfree(proc_ppc64_lparcfg->data);
-		}
+		kfree(proc_ppc64_lparcfg->data);
 		remove_proc_entry("lparcfg", proc_ppc64_lparcfg->parent);
 	}
 }
diff --git a/arch/ppc64/kernel/lparmap.c b/arch/powerpc/kernel/lparmap.c
index b81de286df5e..5a05a797485f 100644
--- a/arch/ppc64/kernel/lparmap.c
+++ b/arch/powerpc/kernel/lparmap.c
@@ -8,7 +8,7 @@
  */
 #include <asm/mmu.h>
 #include <asm/page.h>
-#include <asm/iSeries/LparMap.h>
+#include <asm/iseries/lpar_map.h>
 
 const struct LparMap __attribute__((__section__(".text"))) xLparMap = {
 	.xNumberEsids = HvEsidsToMap,
@@ -25,7 +25,7 @@ const struct LparMap __attribute__((__section__(".text"))) xLparMap = {
 	.xRanges = {
 		{ .xPages = HvPagesToMap,
 		  .xOffset = 0,
-		  .xVPN = KERNEL_VSID(KERNELBASE) << (SID_SHIFT - PAGE_SHIFT),
+		  .xVPN = KERNEL_VSID(KERNELBASE) << (SID_SHIFT - HW_PAGE_SHIFT),
 		},
 	},
 };
diff --git a/arch/ppc64/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec_64.c
index 4775f12a013c..97c51e452be7 100644
--- a/arch/ppc64/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -24,6 +24,7 @@
 #include <asm/mmu.h>
 #include <asm/sections.h>	/* _end */
 #include <asm/prom.h>
+#include <asm/smp.h>
 
 #define HASH_GROUP_SIZE 0x80	/* size of each hash group, asm/mmu.h */
 
@@ -184,8 +185,8 @@ void kexec_copy_flush(struct kimage *image)
  */
 void kexec_smp_down(void *arg)
 {
-	if (ppc_md.cpu_irq_down)
-		ppc_md.cpu_irq_down(1);
+	if (ppc_md.kexec_cpu_down)
+		ppc_md.kexec_cpu_down(0, 1);
 
 	local_irq_disable();
 	kexec_smp_wait();
@@ -205,6 +206,7 @@ static void kexec_prepare_cpus(void)
 			continue;
 
 		while (paca[i].hw_cpu_id != -1) {
+			barrier();
 			if (!cpu_possible(i)) {
 				printk("kexec: cpu %d hw_cpu_id %d is not"
 						" possible, ignoring\n",
@@ -231,8 +233,8 @@ static void kexec_prepare_cpus(void)
 	}
 
 	/* after we tell the others to go down */
-	if (ppc_md.cpu_irq_down)
-		ppc_md.cpu_irq_down(0);
+	if (ppc_md.kexec_cpu_down)
+		ppc_md.kexec_cpu_down(0, 0);
 
 	put_cpu();
 
@@ -243,7 +245,6 @@ static void kexec_prepare_cpus(void)
 
 static void kexec_prepare_cpus(void)
 {
-	extern void smp_release_cpus(void);
 	/*
 	 * move the secondarys to us so that we can copy
 	 * the new kernel 0-0x100 safely
@@ -254,8 +255,8 @@ static void kexec_prepare_cpus(void)
 	 * UP to an SMP kernel.
 	 */
 	smp_release_cpus();
-	if (ppc_md.cpu_irq_down)
-		ppc_md.cpu_irq_down(0);
+	if (ppc_md.kexec_cpu_down)
+		ppc_md.kexec_cpu_down(0, 0);
 	local_irq_disable();
 }
 
@@ -304,3 +305,54 @@ void machine_kexec(struct kimage *image)
 			ppc_md.hpte_clear_all);
 	/* NOTREACHED */
 }
+
+/* Values we need to export to the second kernel via the device tree. */
+static unsigned long htab_base, htab_size, kernel_end;
+
+static struct property htab_base_prop = {
+	.name = "linux,htab-base",
+	.length = sizeof(unsigned long),
+	.value = (unsigned char *)&htab_base,
+};
+
+static struct property htab_size_prop = {
+	.name = "linux,htab-size",
+	.length = sizeof(unsigned long),
+	.value = (unsigned char *)&htab_size,
+};
+
+static struct property kernel_end_prop = {
+	.name = "linux,kernel-end",
+	.length = sizeof(unsigned long),
+	.value = (unsigned char *)&kernel_end,
+};
+
+static void __init export_htab_values(void)
+{
+	struct device_node *node;
+
+	node = of_find_node_by_path("/chosen");
+	if (!node)
+		return;
+
+	kernel_end = __pa(_end);
+	prom_add_property(node, &kernel_end_prop);
+
+	/* On machines with no htab htab_address is NULL */
+	if (NULL == htab_address)
+		goto out;
+
+	htab_base = __pa(htab_address);
+	prom_add_property(node, &htab_base_prop);
+
+	htab_size = 1UL << ppc64_pft_size;
+	prom_add_property(node, &htab_size_prop);
+
+ out:
+	of_node_put(node);
+}
+
+void __init kexec_setup(void)
+{
+	export_htab_values();
+}
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
new file mode 100644
index 000000000000..624a983a9676
--- /dev/null
+++ b/arch/powerpc/kernel/misc_32.S
@@ -0,0 +1,1008 @@
+/*
+ * This file contains miscellaneous low-level functions.
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Largely rewritten by Cort Dougan (cort@cs.nmt.edu)
+ * and Paul Mackerras.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/sys.h>
+#include <asm/unistd.h>
+#include <asm/errno.h>
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+#include <asm/cputable.h>
+#include <asm/mmu.h>
+#include <asm/ppc_asm.h>
+#include <asm/thread_info.h>
+#include <asm/asm-offsets.h>
+
+	.text
+
+/*
+ * This returns the high 64 bits of the product of two 64-bit numbers.
+ */
+_GLOBAL(mulhdu)
+	cmpwi	r6,0
+	cmpwi	cr1,r3,0
+	mr	r10,r4
+	mulhwu	r4,r4,r5
+	beq	1f
+	mulhwu	r0,r10,r6
+	mullw	r7,r10,r5
+	addc	r7,r0,r7
+	addze	r4,r4
+1:	beqlr	cr1		/* all done if high part of A is 0 */
+	mr	r10,r3
+	mullw	r9,r3,r5
+	mulhwu	r3,r3,r5
+	beq	2f
+	mullw	r0,r10,r6
+	mulhwu	r8,r10,r6
+	addc	r7,r0,r7
+	adde	r4,r4,r8
+	addze	r3,r3
+2:	addc	r4,r4,r9
+	addze	r3,r3
+	blr
+
+/*
+ * Returns (address we're running at) - (address we were linked at)
+ * for use before the text and data are mapped to KERNELBASE.
+ */
+_GLOBAL(reloc_offset)
+	mflr	r0
+	bl	1f
+1:	mflr	r3
+	LOADADDR(r4,1b)
+	subf	r3,r4,r3
+	mtlr	r0
+	blr
+
+/*
+ * add_reloc_offset(x) returns x + reloc_offset().
+ */
+_GLOBAL(add_reloc_offset)
+	mflr	r0
+	bl	1f
+1:	mflr	r5
+	LOADADDR(r4,1b)
+	subf	r5,r4,r5
+	add	r3,r3,r5
+	mtlr	r0
+	blr
+
+/*
+ * sub_reloc_offset(x) returns x - reloc_offset().
+ */
+_GLOBAL(sub_reloc_offset)
+	mflr	r0
+	bl	1f
+1:	mflr	r5
+	lis	r4,1b@ha
+	addi	r4,r4,1b@l
+	subf	r5,r4,r5
+	subf	r3,r5,r3
+	mtlr	r0
+	blr
+
+/*
+ * reloc_got2 runs through the .got2 section adding an offset
+ * to each entry.
+ */
+_GLOBAL(reloc_got2)
+	mflr	r11
+	lis	r7,__got2_start@ha
+	addi	r7,r7,__got2_start@l
+	lis	r8,__got2_end@ha
+	addi	r8,r8,__got2_end@l
+	subf	r8,r7,r8
+	srwi.	r8,r8,2
+	beqlr
+	mtctr	r8
+	bl	1f
+1:	mflr	r0
+	lis	r4,1b@ha
+	addi	r4,r4,1b@l
+	subf	r0,r4,r0
+	add	r7,r0,r7
+2:	lwz	r0,0(r7)
+	add	r0,r0,r3
+	stw	r0,0(r7)
+	addi	r7,r7,4
+	bdnz	2b
+	mtlr	r11
+	blr
+
+/*
+ * identify_cpu,
+ * called with r3 = data offset and r4 = CPU number
+ * doesn't change r3
+ */
+_GLOBAL(identify_cpu)
+	addis	r8,r3,cpu_specs@ha
+	addi	r8,r8,cpu_specs@l
+	mfpvr	r7
+1:
+	lwz	r5,CPU_SPEC_PVR_MASK(r8)
+	and	r5,r5,r7
+	lwz	r6,CPU_SPEC_PVR_VALUE(r8)
+	cmplw	0,r6,r5
+	beq	1f
+	addi	r8,r8,CPU_SPEC_ENTRY_SIZE
+	b	1b
+1:
+	addis	r6,r3,cur_cpu_spec@ha
+	addi	r6,r6,cur_cpu_spec@l
+	sub	r8,r8,r3
+	stw	r8,0(r6)
+	blr
+
+/*
+ * do_cpu_ftr_fixups - goes through the list of CPU feature fixups
+ * and writes nop's over sections of code that don't apply for this cpu.
+ * r3 = data offset (not changed)
+ */
+_GLOBAL(do_cpu_ftr_fixups)
+	/* Get CPU 0 features */
+	addis	r6,r3,cur_cpu_spec@ha
+	addi	r6,r6,cur_cpu_spec@l
+	lwz	r4,0(r6)
+	add	r4,r4,r3
+	lwz	r4,CPU_SPEC_FEATURES(r4)
+
+	/* Get the fixup table */
+	addis	r6,r3,__start___ftr_fixup@ha
+	addi	r6,r6,__start___ftr_fixup@l
+	addis	r7,r3,__stop___ftr_fixup@ha
+	addi	r7,r7,__stop___ftr_fixup@l
+
+	/* Do the fixup */
+1:	cmplw	0,r6,r7
+	bgelr
+	addi	r6,r6,16
+	lwz	r8,-16(r6)	/* mask */
+	and	r8,r8,r4
+	lwz	r9,-12(r6)	/* value */
+	cmplw	0,r8,r9
+	beq	1b
+	lwz	r8,-8(r6)	/* section begin */
+	lwz	r9,-4(r6)	/* section end */
+	subf.	r9,r8,r9
+	beq	1b
+	/* write nops over the section of code */
+	/* todo: if large section, add a branch at the start of it */
+	srwi	r9,r9,2
+	mtctr	r9
+	add	r8,r8,r3
+	lis	r0,0x60000000@h	/* nop */
+3:	stw	r0,0(r8)
+	andi.	r10,r4,CPU_FTR_SPLIT_ID_CACHE@l
+	beq	2f
+	dcbst	0,r8		/* suboptimal, but simpler */
+	sync
+	icbi	0,r8
+2:	addi	r8,r8,4
+	bdnz	3b
+	sync			/* additional sync needed on g4 */
+	isync
+	b	1b
+
+/*
+ * call_setup_cpu - call the setup_cpu function for this cpu
+ * r3 = data offset, r24 = cpu number
+ *
+ * Setup function is called with:
+ *   r3 = data offset
+ *   r4 = ptr to CPU spec (relocated)
+ */
+_GLOBAL(call_setup_cpu)
+	addis	r4,r3,cur_cpu_spec@ha
+	addi	r4,r4,cur_cpu_spec@l
+	lwz	r4,0(r4)
+	add	r4,r4,r3
+	lwz	r5,CPU_SPEC_SETUP(r4)
+	cmpi	0,r5,0
+	add	r5,r5,r3
+	beqlr
+	mtctr	r5
+	bctr
+
+#if defined(CONFIG_CPU_FREQ_PMAC) && defined(CONFIG_6xx)
+
+/* This gets called by via-pmu.c to switch the PLL selection
+ * on 750fx CPU. This function should really be moved to some
+ * other place (as most of the cpufreq code in via-pmu
+ */
+_GLOBAL(low_choose_750fx_pll)
+	/* Clear MSR:EE */
+	mfmsr	r7
+	rlwinm	r0,r7,0,17,15
+	mtmsr	r0
+
+	/* If switching to PLL1, disable HID0:BTIC */
+	cmplwi	cr0,r3,0
+	beq	1f
+	mfspr	r5,SPRN_HID0
+	rlwinm	r5,r5,0,27,25
+	sync
+	mtspr	SPRN_HID0,r5
+	isync
+	sync
+
+1:
+	/* Calc new HID1 value */
+	mfspr	r4,SPRN_HID1	/* Build a HID1:PS bit from parameter */
+	rlwinm	r5,r3,16,15,15	/* Clear out HID1:PS from value read */
+	rlwinm	r4,r4,0,16,14	/* Could have I used rlwimi here ? */
+	or	r4,r4,r5
+	mtspr	SPRN_HID1,r4
+
+	/* Store new HID1 image */
+	rlwinm	r6,r1,0,0,18
+	lwz	r6,TI_CPU(r6)
+	slwi	r6,r6,2
+	addis	r6,r6,nap_save_hid1@ha
+	stw	r4,nap_save_hid1@l(r6)
+
+	/* If switching to PLL0, enable HID0:BTIC */
+	cmplwi	cr0,r3,0
+	bne	1f
+	mfspr	r5,SPRN_HID0
+	ori	r5,r5,HID0_BTIC
+	sync
+	mtspr	SPRN_HID0,r5
+	isync
+	sync
+
+1:
+	/* Return */
+	mtmsr	r7
+	blr
+
+_GLOBAL(low_choose_7447a_dfs)
+	/* Clear MSR:EE */
+	mfmsr	r7
+	rlwinm	r0,r7,0,17,15
+	mtmsr	r0
+	
+	/* Calc new HID1 value */
+	mfspr	r4,SPRN_HID1
+	insrwi	r4,r3,1,9	/* insert parameter into bit 9 */
+	sync
+	mtspr	SPRN_HID1,r4
+	sync
+	isync
+
+	/* Return */
+	mtmsr	r7
+	blr
+
+#endif /* CONFIG_CPU_FREQ_PMAC && CONFIG_6xx */
+
+/*
+ * complement mask on the msr then "or" some values on.
+ *     _nmask_and_or_msr(nmask, value_to_or)
+ */
+_GLOBAL(_nmask_and_or_msr)
+	mfmsr	r0		/* Get current msr */
+	andc	r0,r0,r3	/* And off the bits set in r3 (first parm) */
+	or	r0,r0,r4	/* Or on the bits in r4 (second parm) */
+	SYNC			/* Some chip revs have problems here... */
+	mtmsr	r0		/* Update machine state */
+	isync
+	blr			/* Done */
+
+
+/*
+ * Flush MMU TLB
+ */
+_GLOBAL(_tlbia)
+#if defined(CONFIG_40x)
+	sync			/* Flush to memory before changing mapping */
+	tlbia
+	isync			/* Flush shadow TLB */
+#elif defined(CONFIG_44x)
+	li	r3,0
+	sync
+
+	/* Load high watermark */
+	lis	r4,tlb_44x_hwater@ha
+	lwz	r5,tlb_44x_hwater@l(r4)
+
+1:	tlbwe	r3,r3,PPC44x_TLB_PAGEID
+	addi	r3,r3,1
+	cmpw	0,r3,r5
+	ble	1b
+
+	isync
+#elif defined(CONFIG_FSL_BOOKE)
+	/* Invalidate all entries in TLB0 */
+	li	r3, 0x04
+	tlbivax	0,3
+	/* Invalidate all entries in TLB1 */
+	li	r3, 0x0c
+	tlbivax	0,3
+	/* Invalidate all entries in TLB2 */
+	li	r3, 0x14
+	tlbivax	0,3
+	/* Invalidate all entries in TLB3 */
+	li	r3, 0x1c
+	tlbivax	0,3
+	msync
+#ifdef CONFIG_SMP
+	tlbsync
+#endif /* CONFIG_SMP */
+#else /* !(CONFIG_40x || CONFIG_44x || CONFIG_FSL_BOOKE) */
+#if defined(CONFIG_SMP)
+	rlwinm	r8,r1,0,0,18
+	lwz	r8,TI_CPU(r8)
+	oris	r8,r8,10
+	mfmsr	r10
+	SYNC
+	rlwinm	r0,r10,0,17,15		/* clear bit 16 (MSR_EE) */
+	rlwinm	r0,r0,0,28,26		/* clear DR */
+	mtmsr	r0
+	SYNC_601
+	isync
+	lis	r9,mmu_hash_lock@h
+	ori	r9,r9,mmu_hash_lock@l
+	tophys(r9,r9)
+10:	lwarx	r7,0,r9
+	cmpwi	0,r7,0
+	bne-	10b
+	stwcx.	r8,0,r9
+	bne-	10b
+	sync
+	tlbia
+	sync
+	TLBSYNC
+	li	r0,0
+	stw	r0,0(r9)		/* clear mmu_hash_lock */
+	mtmsr	r10
+	SYNC_601
+	isync
+#else /* CONFIG_SMP */
+	sync
+	tlbia
+	sync
+#endif /* CONFIG_SMP */
+#endif /* ! defined(CONFIG_40x) */
+	blr
+
+/*
+ * Flush MMU TLB for a particular address
+ */
+_GLOBAL(_tlbie)
+#if defined(CONFIG_40x)
+	tlbsx.	r3, 0, r3
+	bne	10f
+	sync
+	/* There are only 64 TLB entries, so r3 < 64, which means bit 25 is clear.
+	 * Since 25 is the V bit in the TLB_TAG, loading this value will invalidate
+	 * the TLB entry. */
+	tlbwe	r3, r3, TLB_TAG
+	isync
+10:
+#elif defined(CONFIG_44x)
+	mfspr	r4,SPRN_MMUCR
+	mfspr	r5,SPRN_PID			/* Get PID */
+	rlwimi	r4,r5,0,24,31			/* Set TID */
+	mtspr	SPRN_MMUCR,r4
+
+	tlbsx.	r3, 0, r3
+	bne	10f
+	sync
+	/* There are only 64 TLB entries, so r3 < 64,
+	 * which means bit 22, is clear.  Since 22 is
+	 * the V bit in the TLB_PAGEID, loading this
+	 * value will invalidate the TLB entry.
+	 */
+	tlbwe	r3, r3, PPC44x_TLB_PAGEID
+	isync
+10:
+#elif defined(CONFIG_FSL_BOOKE)
+	rlwinm	r4, r3, 0, 0, 19
+	ori	r5, r4, 0x08	/* TLBSEL = 1 */
+	ori	r6, r4, 0x10	/* TLBSEL = 2 */
+	ori	r7, r4, 0x18	/* TLBSEL = 3 */
+	tlbivax	0, r4
+	tlbivax	0, r5
+	tlbivax	0, r6
+	tlbivax	0, r7
+	msync
+#if defined(CONFIG_SMP)
+	tlbsync
+#endif /* CONFIG_SMP */
+#else /* !(CONFIG_40x || CONFIG_44x || CONFIG_FSL_BOOKE) */
+#if defined(CONFIG_SMP)
+	rlwinm	r8,r1,0,0,18
+	lwz	r8,TI_CPU(r8)
+	oris	r8,r8,11
+	mfmsr	r10
+	SYNC
+	rlwinm	r0,r10,0,17,15		/* clear bit 16 (MSR_EE) */
+	rlwinm	r0,r0,0,28,26		/* clear DR */
+	mtmsr	r0
+	SYNC_601
+	isync
+	lis	r9,mmu_hash_lock@h
+	ori	r9,r9,mmu_hash_lock@l
+	tophys(r9,r9)
+10:	lwarx	r7,0,r9
+	cmpwi	0,r7,0
+	bne-	10b
+	stwcx.	r8,0,r9
+	bne-	10b
+	eieio
+	tlbie	r3
+	sync
+	TLBSYNC
+	li	r0,0
+	stw	r0,0(r9)		/* clear mmu_hash_lock */
+	mtmsr	r10
+	SYNC_601
+	isync
+#else /* CONFIG_SMP */
+	tlbie	r3
+	sync
+#endif /* CONFIG_SMP */
+#endif /* ! CONFIG_40x */
+	blr
+
+/*
+ * Flush instruction cache.
+ * This is a no-op on the 601.
+ */
+_GLOBAL(flush_instruction_cache)
+#if defined(CONFIG_8xx)
+	isync
+	lis	r5, IDC_INVALL@h
+	mtspr	SPRN_IC_CST, r5
+#elif defined(CONFIG_4xx)
+#ifdef CONFIG_403GCX
+	li      r3, 512
+	mtctr   r3
+	lis     r4, KERNELBASE@h
+1:	iccci   0, r4
+	addi    r4, r4, 16
+	bdnz    1b
+#else
+	lis	r3, KERNELBASE@h
+	iccci	0,r3
+#endif
+#elif CONFIG_FSL_BOOKE
+BEGIN_FTR_SECTION
+	mfspr   r3,SPRN_L1CSR0
+	ori     r3,r3,L1CSR0_CFI|L1CSR0_CLFC
+	/* msync; isync recommended here */
+	mtspr   SPRN_L1CSR0,r3
+	isync
+	blr
+END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE)
+	mfspr	r3,SPRN_L1CSR1
+	ori	r3,r3,L1CSR1_ICFI|L1CSR1_ICLFR
+	mtspr	SPRN_L1CSR1,r3
+#else
+	mfspr	r3,SPRN_PVR
+	rlwinm	r3,r3,16,16,31
+	cmpwi	0,r3,1
+	beqlr			/* for 601, do nothing */
+	/* 603/604 processor - use invalidate-all bit in HID0 */
+	mfspr	r3,SPRN_HID0
+	ori	r3,r3,HID0_ICFI
+	mtspr	SPRN_HID0,r3
+#endif /* CONFIG_8xx/4xx */
+	isync
+	blr
+
+/*
+ * Write any modified data cache blocks out to memory
+ * and invalidate the corresponding instruction cache blocks.
+ * This is a no-op on the 601.
+ *
+ * flush_icache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(__flush_icache_range)
+BEGIN_FTR_SECTION
+	blr				/* for 601, do nothing */
+END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE)
+	li	r5,L1_CACHE_BYTES-1
+	andc	r3,r3,r5
+	subf	r4,r3,r4
+	add	r4,r4,r5
+	srwi.	r4,r4,L1_CACHE_SHIFT
+	beqlr
+	mtctr	r4
+	mr	r6,r3
+1:	dcbst	0,r3
+	addi	r3,r3,L1_CACHE_BYTES
+	bdnz	1b
+	sync				/* wait for dcbst's to get to ram */
+	mtctr	r4
+2:	icbi	0,r6
+	addi	r6,r6,L1_CACHE_BYTES
+	bdnz	2b
+	sync				/* additional sync needed on g4 */
+	isync
+	blr
+/*
+ * Write any modified data cache blocks out to memory.
+ * Does not invalidate the corresponding cache lines (especially for
+ * any corresponding instruction cache).
+ *
+ * clean_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(clean_dcache_range)
+	li	r5,L1_CACHE_BYTES-1
+	andc	r3,r3,r5
+	subf	r4,r3,r4
+	add	r4,r4,r5
+	srwi.	r4,r4,L1_CACHE_SHIFT
+	beqlr
+	mtctr	r4
+
+1:	dcbst	0,r3
+	addi	r3,r3,L1_CACHE_BYTES
+	bdnz	1b
+	sync				/* wait for dcbst's to get to ram */
+	blr
+
+/*
+ * Write any modified data cache blocks out to memory and invalidate them.
+ * Does not invalidate the corresponding instruction cache blocks.
+ *
+ * flush_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(flush_dcache_range)
+	li	r5,L1_CACHE_BYTES-1
+	andc	r3,r3,r5
+	subf	r4,r3,r4
+	add	r4,r4,r5
+	srwi.	r4,r4,L1_CACHE_SHIFT
+	beqlr
+	mtctr	r4
+
+1:	dcbf	0,r3
+	addi	r3,r3,L1_CACHE_BYTES
+	bdnz	1b
+	sync				/* wait for dcbst's to get to ram */
+	blr
+
+/*
+ * Like above, but invalidate the D-cache.  This is used by the 8xx
+ * to invalidate the cache so the PPC core doesn't get stale data
+ * from the CPM (no cache snooping here :-).
+ *
+ * invalidate_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(invalidate_dcache_range)
+	li	r5,L1_CACHE_BYTES-1
+	andc	r3,r3,r5
+	subf	r4,r3,r4
+	add	r4,r4,r5
+	srwi.	r4,r4,L1_CACHE_SHIFT
+	beqlr
+	mtctr	r4
+
+1:	dcbi	0,r3
+	addi	r3,r3,L1_CACHE_BYTES
+	bdnz	1b
+	sync				/* wait for dcbi's to get to ram */
+	blr
+
+/*
+ * Flush a particular page from the data cache to RAM.
+ * Note: this is necessary because the instruction cache does *not*
+ * snoop from the data cache.
+ * This is a no-op on the 601 which has a unified cache.
+ *
+ *	void __flush_dcache_icache(void *page)
+ */
+_GLOBAL(__flush_dcache_icache)
+BEGIN_FTR_SECTION
+	blr					/* for 601, do nothing */
+END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE)
+	rlwinm	r3,r3,0,0,19			/* Get page base address */
+	li	r4,4096/L1_CACHE_BYTES	/* Number of lines in a page */
+	mtctr	r4
+	mr	r6,r3
+0:	dcbst	0,r3				/* Write line to ram */
+	addi	r3,r3,L1_CACHE_BYTES
+	bdnz	0b
+	sync
+	mtctr	r4
+1:	icbi	0,r6
+	addi	r6,r6,L1_CACHE_BYTES
+	bdnz	1b
+	sync
+	isync
+	blr
+
+/*
+ * Flush a particular page from the data cache to RAM, identified
+ * by its physical address.  We turn off the MMU so we can just use
+ * the physical address (this may be a highmem page without a kernel
+ * mapping).
+ *
+ *	void __flush_dcache_icache_phys(unsigned long physaddr)
+ */
+_GLOBAL(__flush_dcache_icache_phys)
+BEGIN_FTR_SECTION
+	blr					/* for 601, do nothing */
+END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE)
+	mfmsr	r10
+	rlwinm	r0,r10,0,28,26			/* clear DR */
+	mtmsr	r0
+	isync
+	rlwinm	r3,r3,0,0,19			/* Get page base address */
+	li	r4,4096/L1_CACHE_BYTES	/* Number of lines in a page */
+	mtctr	r4
+	mr	r6,r3
+0:	dcbst	0,r3				/* Write line to ram */
+	addi	r3,r3,L1_CACHE_BYTES
+	bdnz	0b
+	sync
+	mtctr	r4
+1:	icbi	0,r6
+	addi	r6,r6,L1_CACHE_BYTES
+	bdnz	1b
+	sync
+	mtmsr	r10				/* restore DR */
+	isync
+	blr
+
+/*
+ * Clear pages using the dcbz instruction, which doesn't cause any
+ * memory traffic (except to write out any cache lines which get
+ * displaced).  This only works on cacheable memory.
+ *
+ * void clear_pages(void *page, int order) ;
+ */
+_GLOBAL(clear_pages)
+	li	r0,4096/L1_CACHE_BYTES
+	slw	r0,r0,r4
+	mtctr	r0
+#ifdef CONFIG_8xx
+	li	r4, 0
+1:	stw	r4, 0(r3)
+	stw	r4, 4(r3)
+	stw	r4, 8(r3)
+	stw	r4, 12(r3)
+#else
+1:	dcbz	0,r3
+#endif
+	addi	r3,r3,L1_CACHE_BYTES
+	bdnz	1b
+	blr
+
+/*
+ * Copy a whole page.  We use the dcbz instruction on the destination
+ * to reduce memory traffic (it eliminates the unnecessary reads of
+ * the destination into cache).  This requires that the destination
+ * is cacheable.
+ */
+#define COPY_16_BYTES		\
+	lwz	r6,4(r4);	\
+	lwz	r7,8(r4);	\
+	lwz	r8,12(r4);	\
+	lwzu	r9,16(r4);	\
+	stw	r6,4(r3);	\
+	stw	r7,8(r3);	\
+	stw	r8,12(r3);	\
+	stwu	r9,16(r3)
+
+_GLOBAL(copy_page)
+	addi	r3,r3,-4
+	addi	r4,r4,-4
+
+#ifdef CONFIG_8xx
+	/* don't use prefetch on 8xx */
+    	li	r0,4096/L1_CACHE_BYTES
+	mtctr	r0
+1:	COPY_16_BYTES
+	bdnz	1b
+	blr
+
+#else	/* not 8xx, we can prefetch */
+	li	r5,4
+
+#if MAX_COPY_PREFETCH > 1
+	li	r0,MAX_COPY_PREFETCH
+	li	r11,4
+	mtctr	r0
+11:	dcbt	r11,r4
+	addi	r11,r11,L1_CACHE_BYTES
+	bdnz	11b
+#else /* MAX_COPY_PREFETCH == 1 */
+	dcbt	r5,r4
+	li	r11,L1_CACHE_BYTES+4
+#endif /* MAX_COPY_PREFETCH */
+	li	r0,4096/L1_CACHE_BYTES - MAX_COPY_PREFETCH
+	crclr	4*cr0+eq
+2:
+	mtctr	r0
+1:
+	dcbt	r11,r4
+	dcbz	r5,r3
+	COPY_16_BYTES
+#if L1_CACHE_BYTES >= 32
+	COPY_16_BYTES
+#if L1_CACHE_BYTES >= 64
+	COPY_16_BYTES
+	COPY_16_BYTES
+#if L1_CACHE_BYTES >= 128
+	COPY_16_BYTES
+	COPY_16_BYTES
+	COPY_16_BYTES
+	COPY_16_BYTES
+#endif
+#endif
+#endif
+	bdnz	1b
+	beqlr
+	crnot	4*cr0+eq,4*cr0+eq
+	li	r0,MAX_COPY_PREFETCH
+	li	r11,4
+	b	2b
+#endif	/* CONFIG_8xx */
+
+/*
+ * void atomic_clear_mask(atomic_t mask, atomic_t *addr)
+ * void atomic_set_mask(atomic_t mask, atomic_t *addr);
+ */
+_GLOBAL(atomic_clear_mask)
+10:	lwarx	r5,0,r4
+	andc	r5,r5,r3
+	PPC405_ERR77(0,r4)
+	stwcx.	r5,0,r4
+	bne-	10b
+	blr
+_GLOBAL(atomic_set_mask)
+10:	lwarx	r5,0,r4
+	or	r5,r5,r3
+	PPC405_ERR77(0,r4)
+	stwcx.	r5,0,r4
+	bne-	10b
+	blr
+
+/*
+ * I/O string operations
+ *
+ * insb(port, buf, len)
+ * outsb(port, buf, len)
+ * insw(port, buf, len)
+ * outsw(port, buf, len)
+ * insl(port, buf, len)
+ * outsl(port, buf, len)
+ * insw_ns(port, buf, len)
+ * outsw_ns(port, buf, len)
+ * insl_ns(port, buf, len)
+ * outsl_ns(port, buf, len)
+ *
+ * The *_ns versions don't do byte-swapping.
+ */
+_GLOBAL(_insb)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,1
+	blelr-
+00:	lbz	r5,0(r3)
+	eieio
+	stbu	r5,1(r4)
+	bdnz	00b
+	blr
+
+_GLOBAL(_outsb)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,1
+	blelr-
+00:	lbzu	r5,1(r4)
+	stb	r5,0(r3)
+	eieio
+	bdnz	00b
+	blr
+
+_GLOBAL(_insw)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,2
+	blelr-
+00:	lhbrx	r5,0,r3
+	eieio
+	sthu	r5,2(r4)
+	bdnz	00b
+	blr
+
+_GLOBAL(_outsw)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,2
+	blelr-
+00:	lhzu	r5,2(r4)
+	eieio
+	sthbrx	r5,0,r3
+	bdnz	00b
+	blr
+
+_GLOBAL(_insl)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,4
+	blelr-
+00:	lwbrx	r5,0,r3
+	eieio
+	stwu	r5,4(r4)
+	bdnz	00b
+	blr
+
+_GLOBAL(_outsl)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,4
+	blelr-
+00:	lwzu	r5,4(r4)
+	stwbrx	r5,0,r3
+	eieio
+	bdnz	00b
+	blr
+
+_GLOBAL(__ide_mm_insw)
+_GLOBAL(_insw_ns)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,2
+	blelr-
+00:	lhz	r5,0(r3)
+	eieio
+	sthu	r5,2(r4)
+	bdnz	00b
+	blr
+
+_GLOBAL(__ide_mm_outsw)
+_GLOBAL(_outsw_ns)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,2
+	blelr-
+00:	lhzu	r5,2(r4)
+	sth	r5,0(r3)
+	eieio
+	bdnz	00b
+	blr
+
+_GLOBAL(__ide_mm_insl)
+_GLOBAL(_insl_ns)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,4
+	blelr-
+00:	lwz	r5,0(r3)
+	eieio
+	stwu	r5,4(r4)
+	bdnz	00b
+	blr
+
+_GLOBAL(__ide_mm_outsl)
+_GLOBAL(_outsl_ns)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,4
+	blelr-
+00:	lwzu	r5,4(r4)
+	stw	r5,0(r3)
+	eieio
+	bdnz	00b
+	blr
+
+/*
+ * Extended precision shifts.
+ *
+ * Updated to be valid for shift counts from 0 to 63 inclusive.
+ * -- Gabriel
+ *
+ * R3/R4 has 64 bit value
+ * R5    has shift count
+ * result in R3/R4
+ *
+ *  ashrdi3: arithmetic right shift (sign propagation)	
+ *  lshrdi3: logical right shift
+ *  ashldi3: left shift
+ */
+_GLOBAL(__ashrdi3)
+	subfic	r6,r5,32
+	srw	r4,r4,r5	# LSW = count > 31 ? 0 : LSW >> count
+	addi	r7,r5,32	# could be xori, or addi with -32
+	slw	r6,r3,r6	# t1 = count > 31 ? 0 : MSW << (32-count)
+	rlwinm	r8,r7,0,32	# t3 = (count < 32) ? 32 : 0
+	sraw	r7,r3,r7	# t2 = MSW >> (count-32)
+	or	r4,r4,r6	# LSW |= t1
+	slw	r7,r7,r8	# t2 = (count < 32) ? 0 : t2
+	sraw	r3,r3,r5	# MSW = MSW >> count
+	or	r4,r4,r7	# LSW |= t2
+	blr
+
+_GLOBAL(__ashldi3)
+	subfic	r6,r5,32
+	slw	r3,r3,r5	# MSW = count > 31 ? 0 : MSW << count
+	addi	r7,r5,32	# could be xori, or addi with -32
+	srw	r6,r4,r6	# t1 = count > 31 ? 0 : LSW >> (32-count)
+	slw	r7,r4,r7	# t2 = count < 32 ? 0 : LSW << (count-32)
+	or	r3,r3,r6	# MSW |= t1
+	slw	r4,r4,r5	# LSW = LSW << count
+	or	r3,r3,r7	# MSW |= t2
+	blr
+
+_GLOBAL(__lshrdi3)
+	subfic	r6,r5,32
+	srw	r4,r4,r5	# LSW = count > 31 ? 0 : LSW >> count
+	addi	r7,r5,32	# could be xori, or addi with -32
+	slw	r6,r3,r6	# t1 = count > 31 ? 0 : MSW << (32-count)
+	srw	r7,r3,r7	# t2 = count < 32 ? 0 : MSW >> (count-32)
+	or	r4,r4,r6	# LSW |= t1
+	srw	r3,r3,r5	# MSW = MSW >> count
+	or	r4,r4,r7	# LSW |= t2
+	blr
+
+_GLOBAL(abs)
+	srawi	r4,r3,31
+	xor	r3,r3,r4
+	sub	r3,r3,r4
+	blr
+
+_GLOBAL(_get_SP)
+	mr	r3,r1		/* Close enough */
+	blr
+
+/*
+ * Create a kernel thread
+ *   kernel_thread(fn, arg, flags)
+ */
+_GLOBAL(kernel_thread)
+	stwu	r1,-16(r1)
+	stw	r30,8(r1)
+	stw	r31,12(r1)
+	mr	r30,r3		/* function */
+	mr	r31,r4		/* argument */
+	ori	r3,r5,CLONE_VM	/* flags */
+	oris	r3,r3,CLONE_UNTRACED>>16
+	li	r4,0		/* new sp (unused) */
+	li	r0,__NR_clone
+	sc
+	cmpwi	0,r3,0		/* parent or child? */
+	bne	1f		/* return if parent */
+	li	r0,0		/* make top-level stack frame */
+	stwu	r0,-16(r1)
+	mtlr	r30		/* fn addr in lr */
+	mr	r3,r31		/* load arg and call fn */
+	PPC440EP_ERR42
+	blrl
+	li	r0,__NR_exit	/* exit if function returns */
+	li	r3,0
+	sc
+1:	lwz	r30,8(r1)
+	lwz	r31,12(r1)
+	addi	r1,r1,16
+	blr
+
+_GLOBAL(execve)
+	li	r0,__NR_execve
+	sc
+	bnslr
+	neg	r3,r3
+	blr
+
+/*
+ * This routine is just here to keep GCC happy - sigh...
+ */
+_GLOBAL(__main)
+	blr
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
new file mode 100644
index 000000000000..ae48a002f81a
--- /dev/null
+++ b/arch/powerpc/kernel/misc_64.S
@@ -0,0 +1,950 @@
+/*
+ *  arch/powerpc/kernel/misc64.S
+ *
+ * This file contains miscellaneous low-level functions.
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Largely rewritten by Cort Dougan (cort@cs.nmt.edu)
+ * and Paul Mackerras.
+ * Adapted for iSeries by Mike Corrigan (mikejc@us.ibm.com)
+ * PPC64 updates by Dave Engebretsen (engebret@us.ibm.com) 
+ * 
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/sys.h>
+#include <asm/unistd.h>
+#include <asm/errno.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+
+	.text
+
+/*
+ * Returns (address we are running at) - (address we were linked at)
+ * for use before the text and data are mapped to KERNELBASE.
+ */
+
+_GLOBAL(reloc_offset)
+	mflr	r0
+	bl	1f
+1:	mflr	r3
+	LOADADDR(r4,1b)
+	subf	r3,r4,r3
+	mtlr	r0
+	blr
+
+/*
+ * add_reloc_offset(x) returns x + reloc_offset().
+ */
+_GLOBAL(add_reloc_offset)
+	mflr	r0
+	bl	1f
+1:	mflr	r5
+	LOADADDR(r4,1b)
+	subf	r5,r4,r5
+	add	r3,r3,r5
+	mtlr	r0
+	blr
+
+_GLOBAL(get_msr)
+	mfmsr	r3
+	blr
+
+_GLOBAL(get_dar)
+	mfdar	r3
+	blr
+
+_GLOBAL(get_srr0)
+	mfsrr0  r3
+	blr
+
+_GLOBAL(get_srr1)
+	mfsrr1  r3
+	blr
+	
+_GLOBAL(get_sp)
+	mr	r3,r1
+	blr
+
+#ifdef CONFIG_IRQSTACKS
+_GLOBAL(call_do_softirq)
+	mflr	r0
+	std	r0,16(r1)
+	stdu	r1,THREAD_SIZE-112(r3)
+	mr	r1,r3
+	bl	.__do_softirq
+	ld	r1,0(r1)
+	ld	r0,16(r1)
+	mtlr	r0
+	blr
+
+_GLOBAL(call___do_IRQ)
+	mflr	r0
+	std	r0,16(r1)
+	stdu	r1,THREAD_SIZE-112(r5)
+	mr	r1,r5
+	bl	.__do_IRQ
+	ld	r1,0(r1)
+	ld	r0,16(r1)
+	mtlr	r0
+	blr
+#endif /* CONFIG_IRQSTACKS */
+
+	/*
+ * To be called by C code which needs to do some operations with MMU
+ * disabled. Note that interrupts have to be disabled by the caller
+ * prior to calling us. The code called _MUST_ be in the RMO of course
+ * and part of the linear mapping as we don't attempt to translate the
+ * stack pointer at all. The function is called with the stack switched
+ * to this CPU emergency stack
+ *
+ * prototype is void *call_with_mmu_off(void *func, void *data);
+ *
+ * the called function is expected to be of the form
+ *
+ * void *called(void *data); 
+ */
+_GLOBAL(call_with_mmu_off)
+	mflr	r0			/* get link, save it on stackframe */
+	std	r0,16(r1)
+	mr	r1,r5			/* save old stack ptr */
+	ld	r1,PACAEMERGSP(r13)	/* get emerg. stack */
+	subi	r1,r1,STACK_FRAME_OVERHEAD
+	std	r0,16(r1)		/* save link on emerg. stack */
+	std	r5,0(r1)		/* save old stack ptr in backchain */
+	ld	r3,0(r3)		/* get to real function ptr (assume same TOC) */
+	bl	2f			/* we need LR to return, continue at label 2 */
+
+	ld	r0,16(r1)		/* we return here from the call, get LR and */
+	ld	r1,0(r1)		/* .. old stack ptr */
+	mtspr	SPRN_SRR0,r0		/* and get back to virtual mode with these */
+	mfmsr	r4
+	ori	r4,r4,MSR_IR|MSR_DR
+	mtspr	SPRN_SRR1,r4
+	rfid
+
+2:	mtspr	SPRN_SRR0,r3		/* coming from above, enter real mode */
+	mr	r3,r4			/* get parameter */
+	mfmsr	r0
+	ori	r0,r0,MSR_IR|MSR_DR
+	xori	r0,r0,MSR_IR|MSR_DR
+	mtspr	SPRN_SRR1,r0
+	rfid
+
+
+	.section	".toc","aw"
+PPC64_CACHES:
+	.tc		ppc64_caches[TC],ppc64_caches
+	.section	".text"
+
+/*
+ * Write any modified data cache blocks out to memory
+ * and invalidate the corresponding instruction cache blocks.
+ *
+ * flush_icache_range(unsigned long start, unsigned long stop)
+ *
+ *   flush all bytes from start through stop-1 inclusive
+ */
+
+_KPROBE(__flush_icache_range)
+
+/*
+ * Flush the data cache to memory 
+ * 
+ * Different systems have different cache line sizes
+ * and in some cases i-cache and d-cache line sizes differ from
+ * each other.
+ */
+ 	ld	r10,PPC64_CACHES@toc(r2)
+	lwz	r7,DCACHEL1LINESIZE(r10)/* Get cache line size */
+	addi	r5,r7,-1
+	andc	r6,r3,r5		/* round low to line bdy */
+	subf	r8,r6,r4		/* compute length */
+	add	r8,r8,r5		/* ensure we get enough */
+	lwz	r9,DCACHEL1LOGLINESIZE(r10)	/* Get log-2 of cache line size */
+	srw.	r8,r8,r9		/* compute line count */
+	beqlr				/* nothing to do? */
+	mtctr	r8
+1:	dcbst	0,r6
+	add	r6,r6,r7
+	bdnz	1b
+	sync
+
+/* Now invalidate the instruction cache */
+	
+	lwz	r7,ICACHEL1LINESIZE(r10)	/* Get Icache line size */
+	addi	r5,r7,-1
+	andc	r6,r3,r5		/* round low to line bdy */
+	subf	r8,r6,r4		/* compute length */
+	add	r8,r8,r5
+	lwz	r9,ICACHEL1LOGLINESIZE(r10)	/* Get log-2 of Icache line size */
+	srw.	r8,r8,r9		/* compute line count */
+	beqlr				/* nothing to do? */
+	mtctr	r8
+2:	icbi	0,r6
+	add	r6,r6,r7
+	bdnz	2b
+	isync
+	blr
+	.previous .text
+/*
+ * Like above, but only do the D-cache.
+ *
+ * flush_dcache_range(unsigned long start, unsigned long stop)
+ *
+ *    flush all bytes from start to stop-1 inclusive
+ */
+_GLOBAL(flush_dcache_range)
+
+/*
+ * Flush the data cache to memory 
+ * 
+ * Different systems have different cache line sizes
+ */
+ 	ld	r10,PPC64_CACHES@toc(r2)
+	lwz	r7,DCACHEL1LINESIZE(r10)	/* Get dcache line size */
+	addi	r5,r7,-1
+	andc	r6,r3,r5		/* round low to line bdy */
+	subf	r8,r6,r4		/* compute length */
+	add	r8,r8,r5		/* ensure we get enough */
+	lwz	r9,DCACHEL1LOGLINESIZE(r10)	/* Get log-2 of dcache line size */
+	srw.	r8,r8,r9		/* compute line count */
+	beqlr				/* nothing to do? */
+	mtctr	r8
+0:	dcbst	0,r6
+	add	r6,r6,r7
+	bdnz	0b
+	sync
+	blr
+
+/*
+ * Like above, but works on non-mapped physical addresses.
+ * Use only for non-LPAR setups ! It also assumes real mode
+ * is cacheable. Used for flushing out the DART before using
+ * it as uncacheable memory 
+ *
+ * flush_dcache_phys_range(unsigned long start, unsigned long stop)
+ *
+ *    flush all bytes from start to stop-1 inclusive
+ */
+_GLOBAL(flush_dcache_phys_range)
+ 	ld	r10,PPC64_CACHES@toc(r2)
+	lwz	r7,DCACHEL1LINESIZE(r10)	/* Get dcache line size */
+	addi	r5,r7,-1
+	andc	r6,r3,r5		/* round low to line bdy */
+	subf	r8,r6,r4		/* compute length */
+	add	r8,r8,r5		/* ensure we get enough */
+	lwz	r9,DCACHEL1LOGLINESIZE(r10)	/* Get log-2 of dcache line size */
+	srw.	r8,r8,r9		/* compute line count */
+	beqlr				/* nothing to do? */
+	mfmsr	r5			/* Disable MMU Data Relocation */
+	ori	r0,r5,MSR_DR
+	xori	r0,r0,MSR_DR
+	sync
+	mtmsr	r0
+	sync
+	isync
+	mtctr	r8
+0:	dcbst	0,r6
+	add	r6,r6,r7
+	bdnz	0b
+	sync
+	isync
+	mtmsr	r5			/* Re-enable MMU Data Relocation */
+	sync
+	isync
+	blr
+
+_GLOBAL(flush_inval_dcache_range)
+ 	ld	r10,PPC64_CACHES@toc(r2)
+	lwz	r7,DCACHEL1LINESIZE(r10)	/* Get dcache line size */
+	addi	r5,r7,-1
+	andc	r6,r3,r5		/* round low to line bdy */
+	subf	r8,r6,r4		/* compute length */
+	add	r8,r8,r5		/* ensure we get enough */
+	lwz	r9,DCACHEL1LOGLINESIZE(r10)/* Get log-2 of dcache line size */
+	srw.	r8,r8,r9		/* compute line count */
+	beqlr				/* nothing to do? */
+	sync
+	isync
+	mtctr	r8
+0:	dcbf	0,r6
+	add	r6,r6,r7
+	bdnz	0b
+	sync
+	isync
+	blr
+
+
+/*
+ * Flush a particular page from the data cache to RAM.
+ * Note: this is necessary because the instruction cache does *not*
+ * snoop from the data cache.
+ *
+ *	void __flush_dcache_icache(void *page)
+ */
+_GLOBAL(__flush_dcache_icache)
+/*
+ * Flush the data cache to memory 
+ * 
+ * Different systems have different cache line sizes
+ */
+
+/* Flush the dcache */
+ 	ld	r7,PPC64_CACHES@toc(r2)
+	clrrdi	r3,r3,PAGE_SHIFT           	    /* Page align */
+	lwz	r4,DCACHEL1LINESPERPAGE(r7)	/* Get # dcache lines per page */
+	lwz	r5,DCACHEL1LINESIZE(r7)		/* Get dcache line size */
+	mr	r6,r3
+	mtctr	r4
+0:	dcbst	0,r6
+	add	r6,r6,r5
+	bdnz	0b
+	sync
+
+/* Now invalidate the icache */	
+
+	lwz	r4,ICACHEL1LINESPERPAGE(r7)	/* Get # icache lines per page */
+	lwz	r5,ICACHEL1LINESIZE(r7)		/* Get icache line size */
+	mtctr	r4
+1:	icbi	0,r3
+	add	r3,r3,r5
+	bdnz	1b
+	isync
+	blr
+	
+/*
+ * I/O string operations
+ *
+ * insb(port, buf, len)
+ * outsb(port, buf, len)
+ * insw(port, buf, len)
+ * outsw(port, buf, len)
+ * insl(port, buf, len)
+ * outsl(port, buf, len)
+ * insw_ns(port, buf, len)
+ * outsw_ns(port, buf, len)
+ * insl_ns(port, buf, len)
+ * outsl_ns(port, buf, len)
+ *
+ * The *_ns versions don't do byte-swapping.
+ */
+_GLOBAL(_insb)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,1
+	blelr-
+00:	lbz	r5,0(r3)
+	eieio
+	stbu	r5,1(r4)
+	bdnz	00b
+	twi	0,r5,0
+	isync
+	blr
+
+_GLOBAL(_outsb)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,1
+	blelr-
+00:	lbzu	r5,1(r4)
+	stb	r5,0(r3)
+	bdnz	00b
+	sync
+	blr	
+
+_GLOBAL(_insw)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,2
+	blelr-
+00:	lhbrx	r5,0,r3
+	eieio
+	sthu	r5,2(r4)
+	bdnz	00b
+	twi	0,r5,0
+	isync
+	blr
+
+_GLOBAL(_outsw)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,2
+	blelr-
+00:	lhzu	r5,2(r4)
+	sthbrx	r5,0,r3	
+	bdnz	00b
+	sync
+	blr	
+
+_GLOBAL(_insl)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,4
+	blelr-
+00:	lwbrx	r5,0,r3
+	eieio
+	stwu	r5,4(r4)
+	bdnz	00b
+	twi	0,r5,0
+	isync
+	blr
+
+_GLOBAL(_outsl)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,4
+	blelr-
+00:	lwzu	r5,4(r4)
+	stwbrx	r5,0,r3
+	bdnz	00b
+	sync
+	blr	
+
+/* _GLOBAL(ide_insw) now in drivers/ide/ide-iops.c */
+_GLOBAL(_insw_ns)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,2
+	blelr-
+00:	lhz	r5,0(r3)
+	eieio
+	sthu	r5,2(r4)
+	bdnz	00b
+	twi	0,r5,0
+	isync
+	blr
+
+/* _GLOBAL(ide_outsw) now in drivers/ide/ide-iops.c */
+_GLOBAL(_outsw_ns)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,2
+	blelr-
+00:	lhzu	r5,2(r4)
+	sth	r5,0(r3)
+	bdnz	00b
+	sync
+	blr	
+
+_GLOBAL(_insl_ns)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,4
+	blelr-
+00:	lwz	r5,0(r3)
+	eieio
+	stwu	r5,4(r4)
+	bdnz	00b
+	twi	0,r5,0
+	isync
+	blr
+
+_GLOBAL(_outsl_ns)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,4
+	blelr-
+00:	lwzu	r5,4(r4)
+	stw	r5,0(r3)
+	bdnz	00b
+	sync
+	blr	
+
+/*
+ * identify_cpu and calls setup_cpu
+ * In:	r3 = base of the cpu_specs array
+ *	r4 = address of cur_cpu_spec
+ *	r5 = relocation offset
+ */
+_GLOBAL(identify_cpu)
+	mfpvr	r7
+1:
+	lwz	r8,CPU_SPEC_PVR_MASK(r3)
+	and	r8,r8,r7
+	lwz	r9,CPU_SPEC_PVR_VALUE(r3)
+	cmplw	0,r9,r8
+	beq	1f
+	addi	r3,r3,CPU_SPEC_ENTRY_SIZE
+	b	1b
+1:
+	sub	r0,r3,r5
+	std	r0,0(r4)
+	ld	r4,CPU_SPEC_SETUP(r3)
+	add	r4,r4,r5
+	ld	r4,0(r4)
+	add	r4,r4,r5
+	mtctr	r4
+	/* Calling convention for cpu setup is r3=offset, r4=cur_cpu_spec */
+	mr	r4,r3
+	mr	r3,r5
+	bctr
+
+/*
+ * do_cpu_ftr_fixups - goes through the list of CPU feature fixups
+ * and writes nop's over sections of code that don't apply for this cpu.
+ * r3 = data offset (not changed)
+ */
+_GLOBAL(do_cpu_ftr_fixups)
+	/* Get CPU 0 features */
+	LOADADDR(r6,cur_cpu_spec)
+	sub	r6,r6,r3
+	ld	r4,0(r6)
+	sub	r4,r4,r3
+	ld	r4,CPU_SPEC_FEATURES(r4)
+	/* Get the fixup table */
+	LOADADDR(r6,__start___ftr_fixup)
+	sub	r6,r6,r3
+	LOADADDR(r7,__stop___ftr_fixup)
+	sub	r7,r7,r3
+	/* Do the fixup */
+1:	cmpld	r6,r7
+	bgelr
+	addi	r6,r6,32
+	ld	r8,-32(r6)	/* mask */
+	and	r8,r8,r4
+	ld	r9,-24(r6)	/* value */
+	cmpld	r8,r9
+	beq	1b
+	ld	r8,-16(r6)	/* section begin */
+	ld	r9,-8(r6)	/* section end */
+	subf.	r9,r8,r9
+	beq	1b
+	/* write nops over the section of code */
+	/* todo: if large section, add a branch at the start of it */
+	srwi	r9,r9,2
+	mtctr	r9
+	sub	r8,r8,r3
+	lis	r0,0x60000000@h	/* nop */
+3:	stw	r0,0(r8)
+	andi.	r10,r4,CPU_FTR_SPLIT_ID_CACHE@l
+	beq	2f
+	dcbst	0,r8		/* suboptimal, but simpler */
+	sync
+	icbi	0,r8
+2:	addi	r8,r8,4
+	bdnz	3b
+	sync			/* additional sync needed on g4 */
+	isync
+	b	1b
+
+#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE)
+/*
+ * Do an IO access in real mode
+ */
+_GLOBAL(real_readb)
+	mfmsr	r7
+	ori	r0,r7,MSR_DR
+	xori	r0,r0,MSR_DR
+	sync
+	mtmsrd	r0
+	sync
+	isync
+	mfspr	r6,SPRN_HID4
+	rldicl	r5,r6,32,0
+	ori	r5,r5,0x100
+	rldicl	r5,r5,32,0
+	sync
+	mtspr	SPRN_HID4,r5
+	isync
+	slbia
+	isync
+	lbz	r3,0(r3)
+	sync
+	mtspr	SPRN_HID4,r6
+	isync
+	slbia
+	isync
+	mtmsrd	r7
+	sync
+	isync
+	blr
+
+	/*
+ * Do an IO access in real mode
+ */
+_GLOBAL(real_writeb)
+	mfmsr	r7
+	ori	r0,r7,MSR_DR
+	xori	r0,r0,MSR_DR
+	sync
+	mtmsrd	r0
+	sync
+	isync
+	mfspr	r6,SPRN_HID4
+	rldicl	r5,r6,32,0
+	ori	r5,r5,0x100
+	rldicl	r5,r5,32,0
+	sync
+	mtspr	SPRN_HID4,r5
+	isync
+	slbia
+	isync
+	stb	r3,0(r4)
+	sync
+	mtspr	SPRN_HID4,r6
+	isync
+	slbia
+	isync
+	mtmsrd	r7
+	sync
+	isync
+	blr
+#endif /* defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) */
+
+/*
+ * SCOM access functions for 970 (FX only for now)
+ *
+ * unsigned long scom970_read(unsigned int address);
+ * void scom970_write(unsigned int address, unsigned long value);
+ *
+ * The address passed in is the 24 bits register address. This code
+ * is 970 specific and will not check the status bits, so you should
+ * know what you are doing.
+ */
+_GLOBAL(scom970_read)
+	/* interrupts off */
+	mfmsr	r4
+	ori	r0,r4,MSR_EE
+	xori	r0,r0,MSR_EE
+	mtmsrd	r0,1
+
+	/* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits
+	 * (including parity). On current CPUs they must be 0'd,
+	 * and finally or in RW bit
+	 */
+	rlwinm	r3,r3,8,0,15
+	ori	r3,r3,0x8000
+
+	/* do the actual scom read */
+	sync
+	mtspr	SPRN_SCOMC,r3
+	isync
+	mfspr	r3,SPRN_SCOMD
+	isync
+	mfspr	r0,SPRN_SCOMC
+	isync
+
+	/* XXX:	fixup result on some buggy 970's (ouch ! we lost a bit, bah
+	 * that's the best we can do). Not implemented yet as we don't use
+	 * the scom on any of the bogus CPUs yet, but may have to be done
+	 * ultimately
+	 */
+
+	/* restore interrupts */
+	mtmsrd	r4,1
+	blr
+
+
+_GLOBAL(scom970_write)
+	/* interrupts off */
+	mfmsr	r5
+	ori	r0,r5,MSR_EE
+	xori	r0,r0,MSR_EE
+	mtmsrd	r0,1
+
+	/* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits
+	 * (including parity). On current CPUs they must be 0'd.
+	 */
+
+	rlwinm	r3,r3,8,0,15
+
+	sync
+	mtspr	SPRN_SCOMD,r4      /* write data */
+	isync
+	mtspr	SPRN_SCOMC,r3      /* write command */
+	isync
+	mfspr	3,SPRN_SCOMC
+	isync
+
+	/* restore interrupts */
+	mtmsrd	r5,1
+	blr
+
+
+/*
+ * Create a kernel thread
+ *   kernel_thread(fn, arg, flags)
+ */
+_GLOBAL(kernel_thread)
+	std	r29,-24(r1)
+	std	r30,-16(r1)
+	stdu	r1,-STACK_FRAME_OVERHEAD(r1)
+	mr	r29,r3
+	mr	r30,r4
+	ori	r3,r5,CLONE_VM	/* flags */
+	oris	r3,r3,(CLONE_UNTRACED>>16)
+	li	r4,0		/* new sp (unused) */
+	li	r0,__NR_clone
+	sc
+	cmpdi	0,r3,0		/* parent or child? */
+	bne	1f		/* return if parent */
+	li	r0,0
+	stdu	r0,-STACK_FRAME_OVERHEAD(r1)
+	ld	r2,8(r29)
+	ld	r29,0(r29)
+	mtlr	r29              /* fn addr in lr */
+	mr	r3,r30	        /* load arg and call fn */
+	blrl
+	li	r0,__NR_exit	/* exit after child exits */
+        li	r3,0
+	sc
+1:	addi	r1,r1,STACK_FRAME_OVERHEAD	
+	ld	r29,-24(r1)
+	ld	r30,-16(r1)
+	blr
+
+/*
+ * disable_kernel_fp()
+ * Disable the FPU.
+ */
+_GLOBAL(disable_kernel_fp)
+	mfmsr	r3
+	rldicl	r0,r3,(63-MSR_FP_LG),1
+	rldicl	r3,r0,(MSR_FP_LG+1),0
+	mtmsrd	r3			/* disable use of fpu now */
+	isync
+	blr
+
+#ifdef CONFIG_ALTIVEC
+
+#if 0 /* this has no callers for now */
+/*
+ * disable_kernel_altivec()
+ * Disable the VMX.
+ */
+_GLOBAL(disable_kernel_altivec)
+	mfmsr	r3
+	rldicl	r0,r3,(63-MSR_VEC_LG),1
+	rldicl	r3,r0,(MSR_VEC_LG+1),0
+	mtmsrd	r3			/* disable use of VMX now */
+	isync
+	blr
+#endif /* 0 */
+
+/*
+ * giveup_altivec(tsk)
+ * Disable VMX for the task given as the argument,
+ * and save the vector registers in its thread_struct.
+ * Enables the VMX for use in the kernel on return.
+ */
+_GLOBAL(giveup_altivec)
+	mfmsr	r5
+	oris	r5,r5,MSR_VEC@h
+	mtmsrd	r5			/* enable use of VMX now */
+	isync
+	cmpdi	0,r3,0
+	beqlr-				/* if no previous owner, done */
+	addi	r3,r3,THREAD		/* want THREAD of task */
+	ld	r5,PT_REGS(r3)
+	cmpdi	0,r5,0
+	SAVE_32VRS(0,r4,r3)
+	mfvscr	vr0
+	li	r4,THREAD_VSCR
+	stvx	vr0,r4,r3
+	beq	1f
+	ld	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+	lis	r3,MSR_VEC@h
+	andc	r4,r4,r3		/* disable FP for previous task */
+	std	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#ifndef CONFIG_SMP
+	li	r5,0
+	ld	r4,last_task_used_altivec@got(r2)
+	std	r5,0(r4)
+#endif /* CONFIG_SMP */
+	blr
+
+#endif /* CONFIG_ALTIVEC */
+
+_GLOBAL(__setup_cpu_power3)
+	blr
+
+_GLOBAL(execve)
+	li	r0,__NR_execve
+	sc
+	bnslr
+	neg	r3,r3
+	blr
+
+/* kexec_wait(phys_cpu)
+ *
+ * wait for the flag to change, indicating this kernel is going away but
+ * the slave code for the next one is at addresses 0 to 100.
+ *
+ * This is used by all slaves.
+ *
+ * Physical (hardware) cpu id should be in r3.
+ */
+_GLOBAL(kexec_wait)
+	bl	1f
+1:	mflr	r5
+	addi	r5,r5,kexec_flag-1b
+
+99:	HMT_LOW
+#ifdef CONFIG_KEXEC		/* use no memory without kexec */
+	lwz	r4,0(r5)
+	cmpwi	0,r4,0
+	bnea	0x60
+#endif
+	b	99b
+
+/* this can be in text because we won't change it until we are
+ * running in real anyways
+ */
+kexec_flag:
+	.long	0
+
+
+#ifdef CONFIG_KEXEC
+
+/* kexec_smp_wait(void)
+ *
+ * call with interrupts off
+ * note: this is a terminal routine, it does not save lr
+ *
+ * get phys id from paca
+ * set paca id to -1 to say we got here
+ * switch to real mode
+ * join other cpus in kexec_wait(phys_id)
+ */
+_GLOBAL(kexec_smp_wait)
+	lhz	r3,PACAHWCPUID(r13)
+	li	r4,-1
+	sth	r4,PACAHWCPUID(r13)	/* let others know we left */
+	bl	real_mode
+	b	.kexec_wait
+
+/*
+ * switch to real mode (turn mmu off)
+ * we use the early kernel trick that the hardware ignores bits
+ * 0 and 1 (big endian) of the effective address in real mode
+ *
+ * don't overwrite r3 here, it is live for kexec_wait above.
+ */
+real_mode:	/* assume normal blr return */
+1:	li	r9,MSR_RI
+	li	r10,MSR_DR|MSR_IR
+	mflr	r11		/* return address to SRR0 */
+	mfmsr	r12
+	andc	r9,r12,r9
+	andc	r10,r12,r10
+
+	mtmsrd	r9,1
+	mtspr	SPRN_SRR1,r10
+	mtspr	SPRN_SRR0,r11
+	rfid
+
+
+/*
+ * kexec_sequence(newstack, start, image, control, clear_all())
+ *
+ * does the grungy work with stack switching and real mode switches
+ * also does simple calls to other code
+ */
+
+_GLOBAL(kexec_sequence)
+	mflr	r0
+	std	r0,16(r1)
+
+	/* switch stacks to newstack -- &kexec_stack.stack */
+	stdu	r1,THREAD_SIZE-112(r3)
+	mr	r1,r3
+
+	li	r0,0
+	std	r0,16(r1)
+
+	/* save regs for local vars on new stack.
+	 * yes, we won't go back, but ...
+	 */
+	std	r31,-8(r1)
+	std	r30,-16(r1)
+	std	r29,-24(r1)
+	std	r28,-32(r1)
+	std	r27,-40(r1)
+	std	r26,-48(r1)
+	std	r25,-56(r1)
+
+	stdu	r1,-112-64(r1)
+
+	/* save args into preserved regs */
+	mr	r31,r3			/* newstack (both) */
+	mr	r30,r4			/* start (real) */
+	mr	r29,r5			/* image (virt) */
+	mr	r28,r6			/* control, unused */
+	mr	r27,r7			/* clear_all() fn desc */
+	mr	r26,r8			/* spare */
+	lhz	r25,PACAHWCPUID(r13)	/* get our phys cpu from paca */
+
+	/* disable interrupts, we are overwriting kernel data next */
+	mfmsr	r3
+	rlwinm	r3,r3,0,17,15
+	mtmsrd	r3,1
+
+	/* copy dest pages, flush whole dest image */
+	mr	r3,r29
+	bl	.kexec_copy_flush	/* (image) */
+
+	/* turn off mmu */
+	bl	real_mode
+
+	/* clear out hardware hash page table and tlb */
+	ld	r5,0(r27)		/* deref function descriptor */
+	mtctr	r5
+	bctrl				/* ppc_md.hash_clear_all(void); */
+
+/*
+ *   kexec image calling is:
+ *      the first 0x100 bytes of the entry point are copied to 0
+ *
+ *      all slaves branch to slave = 0x60 (absolute)
+ *              slave(phys_cpu_id);
+ *
+ *      master goes to start = entry point
+ *              start(phys_cpu_id, start, 0);
+ *
+ *
+ *   a wrapper is needed to call existing kernels, here is an approximate
+ *   description of one method:
+ *
+ * v2: (2.6.10)
+ *   start will be near the boot_block (maybe 0x100 bytes before it?)
+ *   it will have a 0x60, which will b to boot_block, where it will wait
+ *   and 0 will store phys into struct boot-block and load r3 from there,
+ *   copy kernel 0-0x100 and tell slaves to back down to 0x60 again
+ *
+ * v1: (2.6.9)
+ *    boot block will have all cpus scanning device tree to see if they
+ *    are the boot cpu ?????
+ *    other device tree differences (prop sizes, va vs pa, etc)...
+ */
+
+	/* copy  0x100 bytes starting at start to 0 */
+	li	r3,0
+	mr	r4,r30
+	li	r5,0x100
+	li	r6,0
+	bl	.copy_and_flush	/* (dest, src, copy limit, start offset) */
+1:	/* assume normal blr return */
+
+	/* release other cpus to the new kernel secondary start at 0x60 */
+	mflr	r5
+	li	r6,1
+	stw	r6,kexec_flag-1b(5)
+	mr	r3,r25	# my phys cpu
+	mr	r4,r30	# start, aka phys mem offset
+	mtlr	4
+	li	r5,0
+	blr	/* image->start(physid, image->start, 0); */
+#endif /* CONFIG_KEXEC */
diff --git a/arch/ppc64/kernel/module.c b/arch/powerpc/kernel/module_64.c
index c683bf88e690..928b8581fcb0 100644
--- a/arch/ppc64/kernel/module.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -341,6 +341,19 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 			*(unsigned long *)location = my_r2(sechdrs, me);
 			break;
 
+		case R_PPC64_TOC16:
+			/* Subtact TOC pointer */
+			value -= my_r2(sechdrs, me);
+			if (value + 0x8000 > 0xffff) {
+				printk("%s: bad TOC16 relocation (%lu)\n",
+				       me->name, value);
+				return -ENOEXEC;
+			}
+			*((uint16_t *) location)
+				= (*((uint16_t *) location) & ~0xffff)
+				| (value & 0xffff);
+			break;
+
 		case R_PPC64_TOC16_DS:
 			/* Subtact TOC pointer */
 			value -= my_r2(sechdrs, me);
diff --git a/arch/ppc64/kernel/nvram.c b/arch/powerpc/kernel/nvram_64.c
index 4fb1a9f5060d..c0fcd29918ce 100644
--- a/arch/ppc64/kernel/nvram.c
+++ b/arch/powerpc/kernel/nvram_64.c
@@ -31,7 +31,6 @@
 #include <asm/rtas.h>
 #include <asm/prom.h>
 #include <asm/machdep.h>
-#include <asm/systemcfg.h>
 
 #undef DEBUG_NVRAM
 
@@ -167,7 +166,7 @@ static int dev_nvram_ioctl(struct inode *inode, struct file *file,
 	case IOC_NVRAM_GET_OFFSET: {
 		int part, offset;
 
-		if (systemcfg->platform != PLATFORM_POWERMAC)
+		if (_machine != PLATFORM_POWERMAC)
 			return -EINVAL;
 		if (copy_from_user(&part, (void __user*)arg, sizeof(part)) != 0)
 			return -EFAULT;
@@ -450,7 +449,7 @@ static int nvram_setup_partition(void)
 	 * in our nvram, as Apple defined partitions use pretty much
 	 * all of the space
 	 */
-	if (systemcfg->platform == PLATFORM_POWERMAC)
+	if (_machine == PLATFORM_POWERMAC)
 		return -ENOSPC;
 
 	/* see if we have an OS partition that meets our needs.
diff --git a/arch/ppc64/kernel/of_device.c b/arch/powerpc/kernel/of_device.c
index da580812ddfe..7065e40e2f42 100644
--- a/arch/ppc64/kernel/of_device.c
+++ b/arch/powerpc/kernel/of_device.c
@@ -4,6 +4,8 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/mod_devicetable.h>
+#include <linux/slab.h>
+
 #include <asm/errno.h>
 #include <asm/of_device.h>
 
@@ -184,6 +186,7 @@ void of_release_dev(struct device *dev)
 	struct of_device *ofdev;
 
         ofdev = to_of_device(dev);
+	of_node_put(ofdev->node);
 	kfree(ofdev);
 }
 
@@ -233,7 +236,9 @@ void of_device_unregister(struct of_device *ofdev)
 	device_unregister(&ofdev->dev);
 }
 
-struct of_device* of_platform_device_create(struct device_node *np, const char *bus_id)
+struct of_device* of_platform_device_create(struct device_node *np,
+					    const char *bus_id,
+					    struct device *parent)
 {
 	struct of_device *dev;
 
@@ -242,10 +247,10 @@ struct of_device* of_platform_device_create(struct device_node *np, const char *
 		return NULL;
 	memset(dev, 0, sizeof(*dev));
 
-	dev->node = np;
+	dev->node = of_node_get(np);
 	dev->dma_mask = 0xffffffffUL;
 	dev->dev.dma_mask = &dev->dma_mask;
-	dev->dev.parent = NULL;
+	dev->dev.parent = parent;
 	dev->dev.bus = &of_platform_bus_type;
 	dev->dev.release = of_release_dev;
 
diff --git a/arch/ppc64/kernel/pacaData.c b/arch/powerpc/kernel/paca.c
index 33a2d8db3f21..a7b68f911eb1 100644
--- a/arch/ppc64/kernel/pacaData.c
+++ b/arch/powerpc/kernel/paca.c
@@ -15,24 +15,16 @@
 #include <asm/processor.h>
 #include <asm/ptrace.h>
 #include <asm/page.h>
-
 #include <asm/lppaca.h>
-#include <asm/iSeries/ItLpQueue.h>
+#include <asm/iseries/it_lp_queue.h>
 #include <asm/paca.h>
 
-static union {
-	struct systemcfg	data;
-	u8			page[PAGE_SIZE];
-} systemcfg_store __page_aligned;
-struct systemcfg *systemcfg = &systemcfg_store.data;
-EXPORT_SYMBOL(systemcfg);
-
 
 /* This symbol is provided by the linker - let it fill in the paca
  * field correctly */
 extern unsigned long __toc_start;
 
-/* The Paca is an array with one entry per processor.  Each contains an 
+/* The Paca is an array with one entry per processor.  Each contains an
  * lppaca, which contains the information shared between the
  * hypervisor and Linux.  Each also contains an ItLpRegSave area which
  * is used by the hypervisor to save registers.
diff --git a/arch/ppc64/kernel/pci.c b/arch/powerpc/kernel/pci_64.c
index ff4be1da69d5..8b6008ab217d 100644
--- a/arch/ppc64/kernel/pci.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -30,18 +30,17 @@
 #include <asm/byteorder.h>
 #include <asm/irq.h>
 #include <asm/machdep.h>
-#include <asm/udbg.h>
-
-#include "pci.h"
+#include <asm/ppc-pci.h>
 
 #ifdef DEBUG
+#include <asm/udbg.h>
 #define DBG(fmt...) udbg_printf(fmt)
 #else
 #define DBG(fmt...)
 #endif
 
 unsigned long pci_probe_only = 1;
-unsigned long pci_assign_all_buses = 0;
+int pci_assign_all_buses = 0;
 
 /*
  * legal IO pages under MAX_ISA_PORT.  This is to ensure we don't touch
@@ -56,11 +55,6 @@ static void fixup_resource(struct resource *res, struct pci_dev *dev);
 static void do_bus_setup(struct pci_bus *bus);
 #endif
 
-unsigned int pcibios_assign_all_busses(void)
-{
-	return pci_assign_all_buses;
-}
-
 /* pci_io_base -- the base address from which io bars are offsets.
  * This is the lowest I/O base address (so bar values are always positive),
  * and it *must* be the start of ISA space if an ISA bus exists because
@@ -188,7 +182,7 @@ static DEFINE_SPINLOCK(hose_spinlock);
 /*
  * pci_controller(phb) initialized common variables.
  */
-void __devinit pci_setup_pci_controller(struct pci_controller *hose)
+static void __devinit pci_setup_pci_controller(struct pci_controller *hose)
 {
 	memset(hose, 0, sizeof(struct pci_controller));
 
@@ -198,6 +192,65 @@ void __devinit pci_setup_pci_controller(struct pci_controller *hose)
 	spin_unlock(&hose_spinlock);
 }
 
+static void add_linux_pci_domain(struct device_node *dev,
+				 struct pci_controller *phb)
+{
+	struct property *of_prop;
+	unsigned int size;
+
+	of_prop = (struct property *)
+		get_property(dev, "linux,pci-domain", &size);
+	if (of_prop != NULL)
+		return;
+	WARN_ON(of_prop && size < sizeof(int));
+	if (of_prop && size < sizeof(int))
+		of_prop = NULL;
+	size = sizeof(struct property) + sizeof(int);
+	if (of_prop == NULL) {
+		if (mem_init_done)
+			of_prop = kmalloc(size, GFP_KERNEL);
+		else
+			of_prop = alloc_bootmem(size);
+	}
+	memset(of_prop, 0, sizeof(struct property));
+	of_prop->name = "linux,pci-domain";
+	of_prop->length = sizeof(int);
+	of_prop->value = (unsigned char *)&of_prop[1];
+	*((int *)of_prop->value) = phb->global_number;
+	prom_add_property(dev, of_prop);
+}
+
+struct pci_controller * pcibios_alloc_controller(struct device_node *dev)
+{
+	struct pci_controller *phb;
+
+	if (mem_init_done)
+		phb = kmalloc(sizeof(struct pci_controller), GFP_KERNEL);
+	else
+		phb = alloc_bootmem(sizeof (struct pci_controller));
+	if (phb == NULL)
+		return NULL;
+	pci_setup_pci_controller(phb);
+	phb->arch_data = dev;
+	phb->is_dynamic = mem_init_done;
+	if (dev)
+		add_linux_pci_domain(dev, phb);
+	return phb;
+}
+
+void pcibios_free_controller(struct pci_controller *phb)
+{
+	if (phb->arch_data) {
+		struct device_node *np = phb->arch_data;
+		int *domain = (int *)get_property(np,
+						  "linux,pci-domain", NULL);
+		if (domain)
+			*domain = -1;
+	}
+	if (phb->is_dynamic)
+		kfree(phb);
+}
+
 static void __init pcibios_claim_one_bus(struct pci_bus *b)
 {
 	struct pci_dev *dev;
@@ -296,8 +349,8 @@ static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev)
 	}
 }
 
-static struct pci_dev *of_create_pci_dev(struct device_node *node,
-					 struct pci_bus *bus, int devfn)
+struct pci_dev *of_create_pci_dev(struct device_node *node,
+				 struct pci_bus *bus, int devfn)
 {
 	struct pci_dev *dev;
 	const char *type;
@@ -355,10 +408,9 @@ static struct pci_dev *of_create_pci_dev(struct device_node *node,
 
 	return dev;
 }
+EXPORT_SYMBOL(of_create_pci_dev);
 
-static void of_scan_pci_bridge(struct device_node *node, struct pci_dev *dev);
-
-static void __devinit of_scan_bus(struct device_node *node,
+void __devinit of_scan_bus(struct device_node *node,
 				  struct pci_bus *bus)
 {
 	struct device_node *child = NULL;
@@ -382,9 +434,10 @@ static void __devinit of_scan_bus(struct device_node *node,
 
 	do_bus_setup(bus);
 }
+EXPORT_SYMBOL(of_scan_bus);
 
-static void __devinit of_scan_pci_bridge(struct device_node *node,
-					 struct pci_dev *dev)
+void __devinit of_scan_pci_bridge(struct device_node *node,
+			 	struct pci_dev *dev)
 {
 	struct pci_bus *bus;
 	u32 *busrange, *ranges;
@@ -465,9 +518,10 @@ static void __devinit of_scan_pci_bridge(struct device_node *node,
 	else if (mode == PCI_PROBE_NORMAL)
 		pci_scan_child_bus(bus);
 }
+EXPORT_SYMBOL(of_scan_pci_bridge);
 #endif /* CONFIG_PPC_MULTIPLATFORM */
 
-static void __devinit scan_phb(struct pci_controller *hose)
+void __devinit scan_phb(struct pci_controller *hose)
 {
 	struct pci_bus *bus;
 	struct device_node *node = hose->arch_data;
@@ -548,6 +602,11 @@ static int __init pcibios_init(void)
 	if (ppc64_isabridge_dev != NULL)
 		printk("ISA bridge at %s\n", pci_name(ppc64_isabridge_dev));
 
+#ifdef CONFIG_PPC_MULTIPLATFORM
+	/* map in PCI I/O space */
+	phbs_remap_io();
+#endif
+
 	printk("PCI: Probing PCI hardware done\n");
 
 	return 0;
@@ -727,16 +786,17 @@ static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp,
  * above routine
  */
 pgprot_t pci_phys_mem_access_prot(struct file *file,
-				  unsigned long offset,
+				  unsigned long pfn,
 				  unsigned long size,
 				  pgprot_t protection)
 {
 	struct pci_dev *pdev = NULL;
 	struct resource *found = NULL;
 	unsigned long prot = pgprot_val(protection);
+	unsigned long offset = pfn << PAGE_SHIFT;
 	int i;
 
-	if (page_is_ram(offset >> PAGE_SHIFT))
+	if (page_is_ram(pfn))
 		return __pgprot(prot);
 
 	prot |= _PAGE_NO_CACHE | _PAGE_GUARDED;
@@ -881,9 +941,9 @@ static void __devinit pci_process_ISA_OF_ranges(struct device_node *isa_node,
 }
 
 void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose,
-					    struct device_node *dev)
+					    struct device_node *dev, int prim)
 {
-	unsigned int *ranges;
+	unsigned int *ranges, pci_space;
 	unsigned long size;
 	int rlen = 0;
 	int memno = 0;
@@ -901,21 +961,45 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose,
 	 *			(size depending on dev->n_addr_cells)
 	 *   cells 4+5 or 5+6:	the size of the range
 	 */
-	rlen = 0;
-	hose->io_base_phys = 0;
 	ranges = (unsigned int *) get_property(dev, "ranges", &rlen);
+	if (ranges == NULL)
+		return;
+	hose->io_base_phys = 0;
 	while ((rlen -= np * sizeof(unsigned int)) >= 0) {
 		res = NULL;
-		pci_addr = (unsigned long)ranges[1] << 32 | ranges[2];
+		pci_space = ranges[0];
+		pci_addr = ((unsigned long)ranges[1] << 32) | ranges[2];
 
 		cpu_phys_addr = ranges[3];
-		if (na == 2)
-			cpu_phys_addr = cpu_phys_addr << 32 | ranges[4];
+		if (na >= 2)
+			cpu_phys_addr = (cpu_phys_addr << 32) | ranges[4];
 
-		size = (unsigned long)ranges[na+3] << 32 | ranges[na+4];
+		size = ((unsigned long)ranges[na+3] << 32) | ranges[na+4];
+		ranges += np;
 		if (size == 0)
 			continue;
-		switch ((ranges[0] >> 24) & 0x3) {
+
+		/* Now consume following elements while they are contiguous */
+		while (rlen >= np * sizeof(unsigned int)) {
+			unsigned long addr, phys;
+
+			if (ranges[0] != pci_space)
+				break;
+			addr = ((unsigned long)ranges[1] << 32) | ranges[2];
+			phys = ranges[3];
+			if (na >= 2)
+				phys = (phys << 32) | ranges[4];
+			if (addr != pci_addr + size ||
+			    phys != cpu_phys_addr + size)
+				break;
+
+			size += ((unsigned long)ranges[na+3] << 32)
+				| ranges[na+4];
+			ranges += np;
+			rlen -= np * sizeof(unsigned int);
+		}
+
+		switch ((pci_space >> 24) & 0x3) {
 		case 1:		/* I/O space */
 			hose->io_base_phys = cpu_phys_addr;
 			hose->pci_io_size = size;
@@ -949,7 +1033,6 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose,
 			res->sibling = NULL;
 			res->child = NULL;
 		}
-		ranges += np;
 	}
 }
 
@@ -1079,6 +1162,8 @@ int remap_bus_range(struct pci_bus *bus)
 	
 	if (get_bus_io_range(bus, &start_phys, &start_virt, &size))
 		return 1;
+	if (start_phys == 0)
+		return 1;
 	printk("mapping IO %lx -> %lx, size: %lx\n", start_phys, start_virt, size);
 	if (__ioremap_explicit(start_phys, start_virt, size,
 			       _PAGE_NO_CACHE | _PAGE_GUARDED))
@@ -1096,17 +1181,6 @@ void phbs_remap_io(void)
 		remap_bus_range(hose->bus);
 }
 
-/*
- * ppc64 can have multifunction devices that do not respond to function 0.
- * In this case we must scan all functions.
- * XXX this can go now, we use the OF device tree in all the
- * cases that caused problems. -- paulus
- */
-int pcibios_scan_all_fns(struct pci_bus *bus, int devfn)
-{
-       return 0;
-}
-
 static void __devinit fixup_resource(struct resource *res, struct pci_dev *dev)
 {
 	struct pci_controller *hose = pci_bus_to_host(dev->bus);
@@ -1254,12 +1328,9 @@ long sys_pciconfig_iobase(long which, unsigned long in_bus,
 	 * G5 machines... So when something asks for bus 0 io base
 	 * (bus 0 is HT root), we return the AGP one instead.
 	 */
-#ifdef CONFIG_PPC_PMAC
-	if (systemcfg->platform == PLATFORM_POWERMAC &&
-	    machine_is_compatible("MacRISC4"))
+	if (machine_is_compatible("MacRISC4"))
 		if (in_bus == 0)
 			in_bus = 0xf0;
-#endif /* CONFIG_PPC_PMAC */
 
 	/* That syscall isn't quite compatible with PCI domains, but it's
 	 * used on pre-domains setup. We return the first match
diff --git a/arch/ppc64/kernel/pci_direct_iommu.c b/arch/powerpc/kernel/pci_direct_iommu.c
index b8f7f58824f4..e1a32f802c0b 100644
--- a/arch/ppc64/kernel/pci_direct_iommu.c
+++ b/arch/powerpc/kernel/pci_direct_iommu.c
@@ -27,11 +27,10 @@
 #include <asm/machdep.h>
 #include <asm/pmac_feature.h>
 #include <asm/abs_addr.h>
-
-#include "pci.h"
+#include <asm/ppc-pci.h>
 
 static void *pci_direct_alloc_coherent(struct device *hwdev, size_t size,
-				   dma_addr_t *dma_handle, unsigned int __nocast flag)
+				   dma_addr_t *dma_handle, gfp_t flag)
 {
 	void *ret;
 
diff --git a/arch/ppc64/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c
index a86389d07d57..12c4c9e9bbc7 100644
--- a/arch/ppc64/kernel/pci_dn.c
+++ b/arch/powerpc/kernel/pci_dn.c
@@ -30,8 +30,7 @@
 #include <asm/prom.h>
 #include <asm/pci-bridge.h>
 #include <asm/pSeries_reconfig.h>
-
-#include "pci.h"
+#include <asm/ppc-pci.h>
 
 /*
  * Traverse_func that inits the PCI fields of the device node.
@@ -44,7 +43,7 @@ static void * __devinit update_dn_pci_info(struct device_node *dn, void *data)
 	u32 *regs;
 	struct pci_dn *pdn;
 
-	if (phb->is_dynamic)
+	if (mem_init_done)
 		pdn = kmalloc(sizeof(*pdn), GFP_KERNEL);
 	else
 		pdn = alloc_bootmem(sizeof(*pdn));
@@ -121,6 +120,14 @@ void *traverse_pci_devices(struct device_node *start, traverse_func pre,
 	return NULL;
 }
 
+/** 
+ * pci_devs_phb_init_dynamic - setup pci devices under this PHB
+ * phb: pci-to-host bridge (top-level bridge connecting to cpu)
+ *
+ * This routine is called both during boot, (before the memory
+ * subsystem is set up, before kmalloc is valid) and during the 
+ * dynamic lpar operation of adding a PHB to a running system.
+ */
 void __devinit pci_devs_phb_init_dynamic(struct pci_controller *phb)
 {
 	struct device_node * dn = (struct device_node *) phb->arch_data;
@@ -182,13 +189,14 @@ EXPORT_SYMBOL(fetch_dev_dn);
 static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *node)
 {
 	struct device_node *np = node;
-	struct pci_dn *pci;
+	struct pci_dn *pci = NULL;
 	int err = NOTIFY_OK;
 
 	switch (action) {
 	case PSERIES_RECONFIG_ADD:
 		pci = np->parent->data;
-		update_dn_pci_info(np, pci->phb);
+		if (pci)
+			update_dn_pci_info(np, pci->phb);
 		break;
 	default:
 		err = NOTIFY_DONE;
@@ -201,9 +209,14 @@ static struct notifier_block pci_dn_reconfig_nb = {
 	.notifier_call = pci_dn_reconfig_notifier,
 };
 
-/*
- * Actually initialize the phbs.
- * The buswalk on this phb has not happened yet.
+/** 
+ * pci_devs_phb_init - Initialize phbs and pci devs under them.
+ * 
+ * This routine walks over all phb's (pci-host bridges) on the
+ * system, and sets up assorted pci-related structures 
+ * (including pci info in the device node structs) for each
+ * pci device found underneath.  This routine runs once,
+ * early in the boot sequence.
  */
 void __init pci_devs_phb_init(void)
 {
diff --git a/arch/ppc64/kernel/pci_iommu.c b/arch/powerpc/kernel/pci_iommu.c
index 14647e09c9cd..bdf15dbbf4f0 100644
--- a/arch/ppc64/kernel/pci_iommu.c
+++ b/arch/powerpc/kernel/pci_iommu.c
@@ -1,8 +1,8 @@
 /*
  * arch/ppc64/kernel/pci_iommu.c
  * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
- * 
- * Rewrite, cleanup, new allocation schemes: 
+ *
+ * Rewrite, cleanup, new allocation schemes:
  * Copyright (C) 2004 Olof Johansson, IBM Corporation
  *
  * Dynamic DMA mapping support, platform-independent parts.
@@ -11,19 +11,18 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- * 
+ *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- * 
+ *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
 
-#include <linux/config.h>
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/slab.h>
@@ -37,11 +36,7 @@
 #include <asm/iommu.h>
 #include <asm/pci-bridge.h>
 #include <asm/machdep.h>
-#include "pci.h"
-
-#ifdef CONFIG_PPC_ISERIES
-#include <asm/iSeries/iSeries_pci.h>
-#endif /* CONFIG_PPC_ISERIES */
+#include <asm/ppc-pci.h>
 
 /*
  * We can use ->sysdata directly and avoid the extra work in
@@ -61,13 +56,7 @@ static inline struct iommu_table *devnode_table(struct device *dev)
 	} else
 		pdev = to_pci_dev(dev);
 
-#ifdef CONFIG_PPC_ISERIES
-	return ISERIES_DEVNODE(pdev)->iommu_table;
-#endif /* CONFIG_PPC_ISERIES */
-
-#ifdef CONFIG_PPC_MULTIPLATFORM
 	return PCI_DN(PCI_GET_DN(pdev))->iommu_table;
-#endif /* CONFIG_PPC_MULTIPLATFORM */
 }
 
 
@@ -76,7 +65,7 @@ static inline struct iommu_table *devnode_table(struct device *dev)
  * to the dma address (mapping) of the first page.
  */
 static void *pci_iommu_alloc_coherent(struct device *hwdev, size_t size,
-			   dma_addr_t *dma_handle, unsigned int __nocast flag)
+			   dma_addr_t *dma_handle, gfp_t flag)
 {
 	return iommu_alloc_coherent(devnode_table(hwdev), size, dma_handle,
 			flag);
diff --git a/arch/ppc64/kernel/pmc.c b/arch/powerpc/kernel/pmc.c
index 63d9481c3ec2..2d333cc84082 100644
--- a/arch/ppc64/kernel/pmc.c
+++ b/arch/powerpc/kernel/pmc.c
@@ -1,7 +1,10 @@
 /*
- *  linux/arch/ppc64/kernel/pmc.c
+ *  arch/powerpc/kernel/pmc.c
  *
  *  Copyright (C) 2004 David Gibson, IBM Corporation.
+ *  Includes code formerly from arch/ppc/kernel/perfmon.c:
+ *    Author: Andy Fleming
+ *    Copyright (c) 2004 Freescale Semiconductor, Inc
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
@@ -17,6 +20,20 @@
 #include <asm/processor.h>
 #include <asm/pmc.h>
 
+#if defined(CONFIG_FSL_BOOKE) && !defined(CONFIG_E200)
+static void dummy_perf(struct pt_regs *regs)
+{
+	unsigned int pmgc0 = mfpmr(PMRN_PMGC0);
+
+	pmgc0 &= ~PMGC0_PMIE;
+	mtpmr(PMRN_PMGC0, pmgc0);
+}
+#elif defined(CONFIG_PPC64) || defined(CONFIG_6xx)
+
+#ifndef MMCR0_PMAO
+#define MMCR0_PMAO	0
+#endif
+
 /* Ensure exceptions are disabled */
 static void dummy_perf(struct pt_regs *regs)
 {
@@ -25,6 +42,11 @@ static void dummy_perf(struct pt_regs *regs)
 	mmcr0 &= ~(MMCR0_PMXE|MMCR0_PMAO);
 	mtspr(SPRN_MMCR0, mmcr0);
 }
+#else
+static void dummy_perf(struct pt_regs *regs)
+{
+}
+#endif
 
 static DEFINE_SPINLOCK(pmc_owner_lock);
 static void *pmc_owner_caller; /* mostly for debugging */
@@ -66,11 +88,12 @@ void release_pmc_hardware(void)
 }
 EXPORT_SYMBOL_GPL(release_pmc_hardware);
 
+#ifdef CONFIG_PPC64
 void power4_enable_pmcs(void)
 {
 	unsigned long hid0;
 
-	hid0 = mfspr(HID0);
+	hid0 = mfspr(SPRN_HID0);
 	hid0 |= 1UL << (63 - 20);
 
 	/* POWER4 requires the following sequence */
@@ -83,6 +106,7 @@ void power4_enable_pmcs(void)
 		"mfspr     %0, %1\n"
 		"mfspr     %0, %1\n"
 		"mfspr     %0, %1\n"
-		"isync" : "=&r" (hid0) : "i" (HID0), "0" (hid0):
+		"isync" : "=&r" (hid0) : "i" (SPRN_HID0), "0" (hid0):
 		"memory");
 }
+#endif /* CONFIG_PPC64 */
diff --git a/arch/powerpc/kernel/ppc32.h b/arch/powerpc/kernel/ppc32.h
new file mode 100644
index 000000000000..90e562771791
--- /dev/null
+++ b/arch/powerpc/kernel/ppc32.h
@@ -0,0 +1,138 @@
+#ifndef _PPC64_PPC32_H
+#define _PPC64_PPC32_H
+
+#include <linux/compat.h>
+#include <asm/siginfo.h>
+#include <asm/signal.h>
+
+/*
+ * Data types and macros for providing 32b PowerPC support.
+ * 
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/* These are here to support 32-bit syscalls on a 64-bit kernel. */
+
+typedef struct compat_siginfo {
+	int si_signo;
+	int si_errno;
+	int si_code;
+
+	union {
+		int _pad[SI_PAD_SIZE32];
+
+		/* kill() */
+		struct {
+			compat_pid_t _pid;		/* sender's pid */
+			compat_uid_t _uid;		/* sender's uid */
+		} _kill;
+
+		/* POSIX.1b timers */
+		struct {
+			compat_timer_t _tid;			/* timer id */
+			int _overrun;			/* overrun count */
+			compat_sigval_t _sigval;		/* same as below */
+			int _sys_private;		/* not to be passed to user */
+		} _timer;
+
+		/* POSIX.1b signals */
+		struct {
+			compat_pid_t _pid;		/* sender's pid */
+			compat_uid_t _uid;		/* sender's uid */
+			compat_sigval_t _sigval;
+		} _rt;
+
+		/* SIGCHLD */
+		struct {
+			compat_pid_t _pid;		/* which child */
+			compat_uid_t _uid;		/* sender's uid */
+			int _status;			/* exit code */
+			compat_clock_t _utime;
+			compat_clock_t _stime;
+		} _sigchld;
+
+		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS, SIGEMT */
+		struct {
+			unsigned int _addr; /* faulting insn/memory ref. */
+		} _sigfault;
+
+		/* SIGPOLL */
+		struct {
+			int _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
+			int _fd;
+		} _sigpoll;
+	} _sifields;
+} compat_siginfo_t;
+
+#define __old_sigaction32	old_sigaction32
+
+struct __old_sigaction32 {
+	compat_uptr_t		sa_handler;
+	compat_old_sigset_t  	sa_mask;
+	unsigned int    	sa_flags;
+	compat_uptr_t		sa_restorer;     /* not used by Linux/SPARC yet */
+};
+
+
+
+struct sigaction32 {
+       compat_uptr_t  sa_handler;	/* Really a pointer, but need to deal with 32 bits */
+       unsigned int sa_flags;
+       compat_uptr_t sa_restorer;	/* Another 32 bit pointer */
+       compat_sigset_t sa_mask;		/* A 32 bit mask */
+};
+
+typedef struct sigaltstack_32 {
+	unsigned int ss_sp;
+	int ss_flags;
+	compat_size_t ss_size;
+} stack_32_t;
+
+struct pt_regs32 {
+	unsigned int gpr[32];
+	unsigned int nip;
+	unsigned int msr;
+	unsigned int orig_gpr3;		/* Used for restarting system calls */
+	unsigned int ctr;
+	unsigned int link;
+	unsigned int xer;
+	unsigned int ccr;
+	unsigned int mq;		/* 601 only (not used at present) */
+	unsigned int trap;		/* Reason for being here */
+	unsigned int dar;		/* Fault registers */
+	unsigned int dsisr;
+	unsigned int result;		/* Result of a system call */
+};
+
+struct sigcontext32 {
+	unsigned int	_unused[4];
+	int		signal;
+	compat_uptr_t	handler;
+	unsigned int	oldmask;
+	compat_uptr_t	regs;  /* 4 byte pointer to the pt_regs32 structure. */
+};
+
+struct mcontext32 {
+	elf_gregset_t32		mc_gregs;
+	elf_fpregset_t		mc_fregs;
+	unsigned int		mc_pad[2];
+	elf_vrregset_t32	mc_vregs __attribute__((__aligned__(16)));
+};
+
+struct ucontext32 { 
+	unsigned int	  	uc_flags;
+	unsigned int 	  	uc_link;
+	stack_32_t	 	uc_stack;
+	int		 	uc_pad[7];
+	compat_uptr_t		uc_regs;	/* points to uc_mcontext field */
+	compat_sigset_t	 	uc_sigmask;	/* mask last for extensibility */
+	/* glibc has 1024-bit signal masks, ours are 64-bit */
+	int		 	uc_maskext[30];
+	int		 	uc_pad2[3];
+	struct mcontext32	uc_mcontext;
+};
+
+#endif  /* _PPC64_PPC32_H */
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
new file mode 100644
index 000000000000..94db25708456
--- /dev/null
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -0,0 +1,263 @@
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/threads.h>
+#include <linux/smp.h>
+#include <linux/sched.h>
+#include <linux/elfcore.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/vt_kern.h>
+#include <linux/nvram.h>
+#include <linux/console.h>
+#include <linux/irq.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/ide.h>
+#include <linux/bitops.h>
+
+#include <asm/page.h>
+#include <asm/semaphore.h>
+#include <asm/processor.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/ide.h>
+#include <asm/atomic.h>
+#include <asm/checksum.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+#include <linux/adb.h>
+#include <linux/cuda.h>
+#include <linux/pmu.h>
+#include <asm/prom.h>
+#include <asm/system.h>
+#include <asm/pci-bridge.h>
+#include <asm/irq.h>
+#include <asm/pmac_feature.h>
+#include <asm/dma.h>
+#include <asm/machdep.h>
+#include <asm/hw_irq.h>
+#include <asm/nvram.h>
+#include <asm/mmu_context.h>
+#include <asm/backlight.h>
+#include <asm/time.h>
+#include <asm/cputable.h>
+#include <asm/btext.h>
+#include <asm/div64.h>
+#include <asm/signal.h>
+
+#ifdef  CONFIG_8xx
+#include <asm/commproc.h>
+#endif
+
+#ifdef CONFIG_PPC32
+extern void transfer_to_handler(void);
+extern void do_IRQ(struct pt_regs *regs);
+extern void machine_check_exception(struct pt_regs *regs);
+extern void alignment_exception(struct pt_regs *regs);
+extern void program_check_exception(struct pt_regs *regs);
+extern void single_step_exception(struct pt_regs *regs);
+extern int pmac_newworld;
+extern int sys_sigreturn(struct pt_regs *regs);
+
+EXPORT_SYMBOL(clear_pages);
+EXPORT_SYMBOL(ISA_DMA_THRESHOLD);
+EXPORT_SYMBOL(DMA_MODE_READ);
+EXPORT_SYMBOL(DMA_MODE_WRITE);
+EXPORT_SYMBOL(__div64_32);
+
+EXPORT_SYMBOL(do_signal);
+EXPORT_SYMBOL(transfer_to_handler);
+EXPORT_SYMBOL(do_IRQ);
+EXPORT_SYMBOL(machine_check_exception);
+EXPORT_SYMBOL(alignment_exception);
+EXPORT_SYMBOL(program_check_exception);
+EXPORT_SYMBOL(single_step_exception);
+EXPORT_SYMBOL(sys_sigreturn);
+#endif
+
+#if defined(CONFIG_PPC_PREP)
+EXPORT_SYMBOL(_prep_type);
+EXPORT_SYMBOL(ucSystemType);
+#endif
+
+EXPORT_SYMBOL(strcpy);
+EXPORT_SYMBOL(strncpy);
+EXPORT_SYMBOL(strcat);
+EXPORT_SYMBOL(strncat);
+EXPORT_SYMBOL(strchr);
+EXPORT_SYMBOL(strrchr);
+EXPORT_SYMBOL(strpbrk);
+EXPORT_SYMBOL(strstr);
+EXPORT_SYMBOL(strlen);
+EXPORT_SYMBOL(strnlen);
+EXPORT_SYMBOL(strcmp);
+EXPORT_SYMBOL(strncmp);
+EXPORT_SYMBOL(strcasecmp);
+
+EXPORT_SYMBOL(csum_partial);
+EXPORT_SYMBOL(csum_partial_copy_generic);
+EXPORT_SYMBOL(ip_fast_csum);
+EXPORT_SYMBOL(csum_tcpudp_magic);
+
+EXPORT_SYMBOL(__copy_tofrom_user);
+EXPORT_SYMBOL(__clear_user);
+EXPORT_SYMBOL(__strncpy_from_user);
+EXPORT_SYMBOL(__strnlen_user);
+
+#ifndef  __powerpc64__
+EXPORT_SYMBOL(__ide_mm_insl);
+EXPORT_SYMBOL(__ide_mm_outsw);
+EXPORT_SYMBOL(__ide_mm_insw);
+EXPORT_SYMBOL(__ide_mm_outsl);
+#endif
+
+EXPORT_SYMBOL(_insb);
+EXPORT_SYMBOL(_outsb);
+EXPORT_SYMBOL(_insw);
+EXPORT_SYMBOL(_outsw);
+EXPORT_SYMBOL(_insl);
+EXPORT_SYMBOL(_outsl);
+EXPORT_SYMBOL(_insw_ns);
+EXPORT_SYMBOL(_outsw_ns);
+EXPORT_SYMBOL(_insl_ns);
+EXPORT_SYMBOL(_outsl_ns);
+EXPORT_SYMBOL(ioremap);
+#ifdef CONFIG_44x
+EXPORT_SYMBOL(ioremap64);
+#endif
+EXPORT_SYMBOL(__ioremap);
+EXPORT_SYMBOL(iounmap);
+#ifdef CONFIG_PPC32
+EXPORT_SYMBOL(ioremap_bot);	/* aka VMALLOC_END */
+#endif
+
+#if defined(CONFIG_PPC32) && (defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE))
+EXPORT_SYMBOL(ppc_ide_md);
+#endif
+
+#if defined(CONFIG_PCI) && defined(CONFIG_PPC32)
+EXPORT_SYMBOL(isa_io_base);
+EXPORT_SYMBOL(isa_mem_base);
+EXPORT_SYMBOL(pci_dram_offset);
+EXPORT_SYMBOL(pci_alloc_consistent);
+EXPORT_SYMBOL(pci_free_consistent);
+EXPORT_SYMBOL(pci_bus_io_base);
+EXPORT_SYMBOL(pci_bus_io_base_phys);
+EXPORT_SYMBOL(pci_bus_mem_base_phys);
+EXPORT_SYMBOL(pci_bus_to_hose);
+#endif /* CONFIG_PCI */
+
+#ifdef CONFIG_NOT_COHERENT_CACHE
+EXPORT_SYMBOL(flush_dcache_all);
+#endif
+
+EXPORT_SYMBOL(start_thread);
+EXPORT_SYMBOL(kernel_thread);
+
+EXPORT_SYMBOL(giveup_fpu);
+#ifdef CONFIG_ALTIVEC
+EXPORT_SYMBOL(giveup_altivec);
+#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_SPE
+EXPORT_SYMBOL(giveup_spe);
+#endif /* CONFIG_SPE */
+
+#ifndef CONFIG_PPC64
+EXPORT_SYMBOL(flush_instruction_cache);
+EXPORT_SYMBOL(flush_tlb_kernel_range);
+EXPORT_SYMBOL(flush_tlb_page);
+EXPORT_SYMBOL(_tlbie);
+#endif
+EXPORT_SYMBOL(__flush_icache_range);
+EXPORT_SYMBOL(flush_dcache_range);
+
+#ifdef CONFIG_SMP
+EXPORT_SYMBOL(smp_call_function);
+#ifdef CONFIG_PPC32
+EXPORT_SYMBOL(smp_hw_index);
+#endif
+#endif
+
+#ifdef CONFIG_ADB
+EXPORT_SYMBOL(adb_request);
+EXPORT_SYMBOL(adb_register);
+EXPORT_SYMBOL(adb_unregister);
+EXPORT_SYMBOL(adb_poll);
+EXPORT_SYMBOL(adb_try_handler_change);
+#endif /* CONFIG_ADB */
+#ifdef CONFIG_ADB_CUDA
+EXPORT_SYMBOL(cuda_request);
+EXPORT_SYMBOL(cuda_poll);
+#endif /* CONFIG_ADB_CUDA */
+#ifdef CONFIG_PPC_PMAC
+EXPORT_SYMBOL(sys_ctrler);
+#endif
+#ifdef CONFIG_VT
+EXPORT_SYMBOL(kd_mksound);
+#endif
+EXPORT_SYMBOL(to_tm);
+
+#ifdef CONFIG_PPC32
+long long __ashrdi3(long long, int);
+long long __ashldi3(long long, int);
+long long __lshrdi3(long long, int);
+EXPORT_SYMBOL(__ashrdi3);
+EXPORT_SYMBOL(__ashldi3);
+EXPORT_SYMBOL(__lshrdi3);
+#endif
+
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memset);
+EXPORT_SYMBOL(memmove);
+EXPORT_SYMBOL(memscan);
+EXPORT_SYMBOL(memcmp);
+EXPORT_SYMBOL(memchr);
+
+#if defined(CONFIG_FB_VGA16_MODULE)
+EXPORT_SYMBOL(screen_info);
+#endif
+
+#ifdef CONFIG_PPC32
+EXPORT_SYMBOL(__delay);
+EXPORT_SYMBOL(timer_interrupt);
+EXPORT_SYMBOL(irq_desc);
+EXPORT_SYMBOL(tb_ticks_per_jiffy);
+EXPORT_SYMBOL(console_drivers);
+EXPORT_SYMBOL(cacheable_memcpy);
+#endif
+
+EXPORT_SYMBOL(__up);
+EXPORT_SYMBOL(__down);
+EXPORT_SYMBOL(__down_interruptible);
+
+#ifdef  CONFIG_8xx
+EXPORT_SYMBOL(cpm_install_handler);
+EXPORT_SYMBOL(cpm_free_handler);
+#endif /* CONFIG_8xx */
+#if defined(CONFIG_8xx) || defined(CONFIG_40x) || defined(CONFIG_85xx) ||\
+	defined(CONFIG_83xx)
+EXPORT_SYMBOL(__res);
+#endif
+
+#ifdef CONFIG_PPC32
+EXPORT_SYMBOL(next_mmu_context);
+EXPORT_SYMBOL(set_context);
+#endif
+
+#ifdef CONFIG_PPC_STD_MMU_32
+extern long mol_trampoline;
+EXPORT_SYMBOL(mol_trampoline); /* For MOL */
+EXPORT_SYMBOL(flush_hash_pages); /* For MOL */
+EXPORT_SYMBOL_GPL(__handle_mm_fault); /* For MOL */
+#ifdef CONFIG_SMP
+extern int mmu_hash_lock;
+EXPORT_SYMBOL(mmu_hash_lock); /* For MOL */
+#endif /* CONFIG_SMP */
+extern long *intercept_table;
+EXPORT_SYMBOL(intercept_table);
+#endif /* CONFIG_PPC_STD_MMU_32 */
+#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+EXPORT_SYMBOL(__mtdcr);
+EXPORT_SYMBOL(__mfdcr);
+#endif
diff --git a/arch/ppc64/kernel/proc_ppc64.c b/arch/powerpc/kernel/proc_ppc64.c
index a87c66a9652a..7ba42a405f41 100644
--- a/arch/ppc64/kernel/proc_ppc64.c
+++ b/arch/powerpc/kernel/proc_ppc64.c
@@ -1,18 +1,16 @@
 /*
- * arch/ppc64/kernel/proc_ppc64.c
- *
  * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen IBM Corporation
- * 
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- * 
+ *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- * 
+ *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
@@ -25,7 +23,7 @@
 #include <linux/slab.h>
 #include <linux/kernel.h>
 
-#include <asm/systemcfg.h>
+#include <asm/vdso_datapage.h>
 #include <asm/rtas.h>
 #include <asm/uaccess.h>
 #include <asm/prom.h>
@@ -53,7 +51,7 @@ static int __init proc_ppc64_create(void)
 	if (!root)
 		return 1;
 
-	if (!(systemcfg->platform & (PLATFORM_PSERIES | PLATFORM_BPA)))
+	if (!(platform_is_pseries() || _machine == PLATFORM_CELL))
 		return 0;
 
 	if (!proc_mkdir("rtas", root))
@@ -74,7 +72,7 @@ static int __init proc_ppc64_init(void)
 	if (!pde)
 		return 1;
 	pde->nlink = 1;
-	pde->data = systemcfg;
+	pde->data = vdso_data;
 	pde->size = PAGE_SIZE;
 	pde->proc_fops = &page_map_fops;
 
diff --git a/arch/ppc64/kernel/process.c b/arch/powerpc/kernel/process.c
index 887005358eb1..105d5609ff57 100644
--- a/arch/ppc64/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -1,5 +1,5 @@
 /*
- *  linux/arch/ppc64/kernel/process.c
+ *  arch/ppc/kernel/process.c
  *
  *  Derived from "arch/i386/kernel/process.c"
  *    Copyright (C) 1995  Linus Torvalds
@@ -7,7 +7,7 @@
  *  Updated and modified by Cort Dougan (cort@cs.nmt.edu) and
  *  Paul Mackerras (paulus@cs.anu.edu.au)
  *
- *  PowerPC version 
+ *  PowerPC version
  *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
  *
  *  This program is free software; you can redistribute it and/or
@@ -17,7 +17,6 @@
  */
 
 #include <linux/config.h>
-#include <linux/module.h>
 #include <linux/errno.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
@@ -26,15 +25,17 @@
 #include <linux/smp_lock.h>
 #include <linux/stddef.h>
 #include <linux/unistd.h>
+#include <linux/ptrace.h>
 #include <linux/slab.h>
 #include <linux/user.h>
 #include <linux/elf.h>
 #include <linux/init.h>
-#include <linux/init_task.h>
 #include <linux/prctl.h>
-#include <linux/ptrace.h>
+#include <linux/init_task.h>
+#include <linux/module.h>
 #include <linux/kallsyms.h>
-#include <linux/interrupt.h>
+#include <linux/mqueue.h>
+#include <linux/hardirq.h>
 #include <linux/utsname.h>
 #include <linux/kprobes.h>
 
@@ -44,21 +45,19 @@
 #include <asm/io.h>
 #include <asm/processor.h>
 #include <asm/mmu.h>
-#include <asm/mmu_context.h>
 #include <asm/prom.h>
-#include <asm/ppcdebug.h>
 #include <asm/machdep.h>
-#include <asm/iSeries/HvCallHpt.h>
-#include <asm/cputable.h>
+#ifdef CONFIG_PPC64
 #include <asm/firmware.h>
-#include <asm/sections.h>
-#include <asm/tlbflush.h>
 #include <asm/time.h>
-#include <asm/plpar_wrappers.h>
+#endif
+
+extern unsigned long _get_SP(void);
 
 #ifndef CONFIG_SMP
 struct task_struct *last_task_used_math = NULL;
 struct task_struct *last_task_used_altivec = NULL;
+struct task_struct *last_task_used_spe = NULL;
 #endif
 
 /*
@@ -121,7 +120,6 @@ int dump_task_fpu(struct task_struct *tsk, elf_fpregset_t *fpregs)
 }
 
 #ifdef CONFIG_ALTIVEC
-
 void enable_kernel_altivec(void)
 {
 	WARN_ON(preemptible());
@@ -130,7 +128,7 @@ void enable_kernel_altivec(void)
 	if (current->thread.regs && (current->thread.regs->msr & MSR_VEC))
 		giveup_altivec(current);
 	else
-		giveup_altivec(NULL);	/* just enables FP for kernel */
+		giveup_altivec(NULL);	/* just enable AltiVec for kernel - force */
 #else
 	giveup_altivec(last_task_used_altivec);
 #endif /* CONFIG_SMP */
@@ -161,36 +159,86 @@ int dump_task_altivec(struct pt_regs *regs, elf_vrregset_t *vrregs)
 	memcpy(vrregs, &current->thread.vr[0], sizeof(*vrregs));
 	return 1;
 }
-
 #endif /* CONFIG_ALTIVEC */
 
-static void set_dabr_spr(unsigned long val)
+#ifdef CONFIG_SPE
+
+void enable_kernel_spe(void)
 {
-	mtspr(SPRN_DABR, val);
+	WARN_ON(preemptible());
+
+#ifdef CONFIG_SMP
+	if (current->thread.regs && (current->thread.regs->msr & MSR_SPE))
+		giveup_spe(current);
+	else
+		giveup_spe(NULL);	/* just enable SPE for kernel - force */
+#else
+	giveup_spe(last_task_used_spe);
+#endif /* __SMP __ */
 }
+EXPORT_SYMBOL(enable_kernel_spe);
 
-int set_dabr(unsigned long dabr)
+void flush_spe_to_thread(struct task_struct *tsk)
 {
-	int ret = 0;
-
-	if (firmware_has_feature(FW_FEATURE_XDABR)) {
-		/* We want to catch accesses from kernel and userspace */
-		unsigned long flags = H_DABRX_KERNEL|H_DABRX_USER;
-		ret = plpar_set_xdabr(dabr, flags);
-	} else if (firmware_has_feature(FW_FEATURE_DABR)) {
-		ret = plpar_set_dabr(dabr);
-	} else {
-		set_dabr_spr(dabr);
+	if (tsk->thread.regs) {
+		preempt_disable();
+		if (tsk->thread.regs->msr & MSR_SPE) {
+#ifdef CONFIG_SMP
+			BUG_ON(tsk != current);
+#endif
+			giveup_spe(current);
+		}
+		preempt_enable();
 	}
+}
+
+int dump_spe(struct pt_regs *regs, elf_vrregset_t *evrregs)
+{
+	flush_spe_to_thread(current);
+	/* We copy u32 evr[32] + u64 acc + u32 spefscr -> 35 */
+	memcpy(evrregs, &current->thread.evr[0], sizeof(u32) * 35);
+	return 1;
+}
+#endif /* CONFIG_SPE */
+
+/*
+ * If we are doing lazy switching of CPU state (FP, altivec or SPE),
+ * and the current task has some state, discard it.
+ */
+static inline void discard_lazy_cpu_state(void)
+{
+#ifndef CONFIG_SMP
+	preempt_disable();
+	if (last_task_used_math == current)
+		last_task_used_math = NULL;
+#ifdef CONFIG_ALTIVEC
+	if (last_task_used_altivec == current)
+		last_task_used_altivec = NULL;
+#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_SPE
+	if (last_task_used_spe == current)
+		last_task_used_spe = NULL;
+#endif
+	preempt_enable();
+#endif /* CONFIG_SMP */
+}
+
+int set_dabr(unsigned long dabr)
+{
+	if (ppc_md.set_dabr)
+		return ppc_md.set_dabr(dabr);
 
-	return ret;
+	mtspr(SPRN_DABR, dabr);
+	return 0;
 }
 
+#ifdef CONFIG_PPC64
 DEFINE_PER_CPU(struct cpu_usage, cpu_usage_array);
 static DEFINE_PER_CPU(unsigned long, current_dabr);
+#endif
 
 struct task_struct *__switch_to(struct task_struct *prev,
-				struct task_struct *new)
+	struct task_struct *new)
 {
 	struct thread_struct *new_thread, *old_thread;
 	unsigned long flags;
@@ -200,7 +248,7 @@ struct task_struct *__switch_to(struct task_struct *prev,
 	/* avoid complexity of lazy save/restore of fpu
 	 * by just saving it every time we switch out if
 	 * this task used the fpu during the last quantum.
-	 * 
+	 *
 	 * If it tries to use the fpu again, it'll trap and
 	 * reload its fp regs.  So we don't have to do a restore
 	 * every switch, just a save.
@@ -209,31 +257,65 @@ struct task_struct *__switch_to(struct task_struct *prev,
 	if (prev->thread.regs && (prev->thread.regs->msr & MSR_FP))
 		giveup_fpu(prev);
 #ifdef CONFIG_ALTIVEC
+	/*
+	 * If the previous thread used altivec in the last quantum
+	 * (thus changing altivec regs) then save them.
+	 * We used to check the VRSAVE register but not all apps
+	 * set it, so we don't rely on it now (and in fact we need
+	 * to save & restore VSCR even if VRSAVE == 0).  -- paulus
+	 *
+	 * On SMP we always save/restore altivec regs just to avoid the
+	 * complexity of changing processors.
+	 *  -- Cort
+	 */
 	if (prev->thread.regs && (prev->thread.regs->msr & MSR_VEC))
 		giveup_altivec(prev);
 #endif /* CONFIG_ALTIVEC */
-#endif /* CONFIG_SMP */
+#ifdef CONFIG_SPE
+	/*
+	 * If the previous thread used spe in the last quantum
+	 * (thus changing spe regs) then save them.
+	 *
+	 * On SMP we always save/restore spe regs just to avoid the
+	 * complexity of changing processors.
+	 */
+	if ((prev->thread.regs && (prev->thread.regs->msr & MSR_SPE)))
+		giveup_spe(prev);
+#endif /* CONFIG_SPE */
 
-#if defined(CONFIG_ALTIVEC) && !defined(CONFIG_SMP)
+#else  /* CONFIG_SMP */
+#ifdef CONFIG_ALTIVEC
 	/* Avoid the trap.  On smp this this never happens since
 	 * we don't set last_task_used_altivec -- Cort
 	 */
 	if (new->thread.regs && last_task_used_altivec == new)
 		new->thread.regs->msr |= MSR_VEC;
 #endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_SPE
+	/* Avoid the trap.  On smp this this never happens since
+	 * we don't set last_task_used_spe
+	 */
+	if (new->thread.regs && last_task_used_spe == new)
+		new->thread.regs->msr |= MSR_SPE;
+#endif /* CONFIG_SPE */
+
+#endif /* CONFIG_SMP */
 
+#ifdef CONFIG_PPC64	/* for now */
 	if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr)) {
 		set_dabr(new->thread.dabr);
 		__get_cpu_var(current_dabr) = new->thread.dabr;
 	}
 
 	flush_tlb_pending();
+#endif
 
 	new_thread = &new->thread;
 	old_thread = &current->thread;
 
-	/* Collect purr utilization data per process and per processor
-	 * wise purr is nothing but processor time base
+#ifdef CONFIG_PPC64
+	/*
+	 * Collect processor utilization data per process
 	 */
 	if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
 		struct cpu_usage *cu = &__get_cpu_var(cpu_usage_array);
@@ -243,6 +325,7 @@ struct task_struct *__switch_to(struct task_struct *prev,
 		old_thread->accum_tb += (current_tb - start_tb);
 		new_thread->start_tb = current_tb;
 	}
+#endif
 
 	local_irq_save(flags);
 	last = _switch(old_thread, new_thread);
@@ -254,6 +337,13 @@ struct task_struct *__switch_to(struct task_struct *prev,
 
 static int instructions_to_print = 16;
 
+#ifdef CONFIG_PPC64
+#define BAD_PC(pc)	((REGION_ID(pc) != KERNEL_REGION_ID) && \
+		         (REGION_ID(pc) != VMALLOC_REGION_ID))
+#else
+#define BAD_PC(pc)	((pc) < KERNELBASE)
+#endif
+
 static void show_instructions(struct pt_regs *regs)
 {
 	int i;
@@ -268,9 +358,7 @@ static void show_instructions(struct pt_regs *regs)
 		if (!(i % 8))
 			printk("\n");
 
-		if (((REGION_ID(pc) != KERNEL_REGION_ID) &&
-		     (REGION_ID(pc) != VMALLOC_REGION_ID)) ||
-		     __get_user(instr, (unsigned int *)pc)) {
+		if (BAD_PC(pc) || __get_user(instr, (unsigned int *)pc)) {
 			printk("XXXXXXXX ");
 		} else {
 			if (regs->nip == pc)
@@ -285,50 +373,82 @@ static void show_instructions(struct pt_regs *regs)
 	printk("\n");
 }
 
+static struct regbit {
+	unsigned long bit;
+	const char *name;
+} msr_bits[] = {
+	{MSR_EE,	"EE"},
+	{MSR_PR,	"PR"},
+	{MSR_FP,	"FP"},
+	{MSR_ME,	"ME"},
+	{MSR_IR,	"IR"},
+	{MSR_DR,	"DR"},
+	{0,		NULL}
+};
+
+static void printbits(unsigned long val, struct regbit *bits)
+{
+	const char *sep = "";
+
+	printk("<");
+	for (; bits->bit; ++bits)
+		if (val & bits->bit) {
+			printk("%s%s", sep, bits->name);
+			sep = ",";
+		}
+	printk(">");
+}
+
+#ifdef CONFIG_PPC64
+#define REG		"%016lX"
+#define REGS_PER_LINE	4
+#define LAST_VOLATILE	13
+#else
+#define REG		"%08lX"
+#define REGS_PER_LINE	8
+#define LAST_VOLATILE	12
+#endif
+
 void show_regs(struct pt_regs * regs)
 {
-	int i;
-	unsigned long trap;
+	int i, trap;
 
-	printk("NIP: %016lX XER: %08X LR: %016lX CTR: %016lX\n",
-	       regs->nip, (unsigned int)regs->xer, regs->link, regs->ctr);
+	printk("NIP: "REG" LR: "REG" CTR: "REG"\n",
+	       regs->nip, regs->link, regs->ctr);
 	printk("REGS: %p TRAP: %04lx   %s  (%s)\n",
 	       regs, regs->trap, print_tainted(), system_utsname.release);
-	printk("MSR: %016lx EE: %01x PR: %01x FP: %01x ME: %01x "
-	       "IR/DR: %01x%01x CR: %08X\n",
-	       regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
-	       regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
-	       regs->msr&MSR_IR ? 1 : 0,
-	       regs->msr&MSR_DR ? 1 : 0,
-	       (unsigned int)regs->ccr);
+	printk("MSR: "REG" ", regs->msr);
+	printbits(regs->msr, msr_bits);
+	printk("  CR: %08lX  XER: %08lX\n", regs->ccr, regs->xer);
 	trap = TRAP(regs);
-	printk("DAR: %016lx DSISR: %016lx\n", regs->dar, regs->dsisr);
-	printk("TASK: %p[%d] '%s' THREAD: %p",
+	if (trap == 0x300 || trap == 0x600)
+		printk("DAR: "REG", DSISR: "REG"\n", regs->dar, regs->dsisr);
+	printk("TASK = %p[%d] '%s' THREAD: %p",
 	       current, current->pid, current->comm, current->thread_info);
 
 #ifdef CONFIG_SMP
 	printk(" CPU: %d", smp_processor_id());
 #endif /* CONFIG_SMP */
 
-	for (i = 0; i < 32; i++) {
-		if ((i % 4) == 0) {
+	for (i = 0;  i < 32;  i++) {
+		if ((i % REGS_PER_LINE) == 0)
 			printk("\n" KERN_INFO "GPR%02d: ", i);
-		}
-
-		printk("%016lX ", regs->gpr[i]);
-		if (i == 13 && !FULL_REGS(regs))
+		printk(REG " ", regs->gpr[i]);
+		if (i == LAST_VOLATILE && !FULL_REGS(regs))
 			break;
 	}
 	printk("\n");
+#ifdef CONFIG_KALLSYMS
 	/*
 	 * Lookup NIP late so we have the best change of getting the
 	 * above info out without failing
 	 */
-	printk("NIP [%016lx] ", regs->nip);
+	printk("NIP ["REG"] ", regs->nip);
 	print_symbol("%s\n", regs->nip);
-	printk("LR [%016lx] ", regs->link);
+	printk("LR ["REG"] ", regs->link);
 	print_symbol("%s\n", regs->link);
-	show_stack(current, (unsigned long *)regs->gpr[1]);
+#endif
+	show_stack(current, (unsigned long *) regs->gpr[1]);
 	if (!user_mode(regs))
 		show_instructions(regs);
 }
@@ -336,38 +456,26 @@ void show_regs(struct pt_regs * regs)
 void exit_thread(void)
 {
 	kprobe_flush_task(current);
-
-#ifndef CONFIG_SMP
-	if (last_task_used_math == current)
-		last_task_used_math = NULL;
-#ifdef CONFIG_ALTIVEC
-	if (last_task_used_altivec == current)
-		last_task_used_altivec = NULL;
-#endif /* CONFIG_ALTIVEC */
-#endif /* CONFIG_SMP */
+	discard_lazy_cpu_state();
 }
 
 void flush_thread(void)
 {
+#ifdef CONFIG_PPC64
 	struct thread_info *t = current_thread_info();
 
-	kprobe_flush_task(current);
 	if (t->flags & _TIF_ABI_PENDING)
 		t->flags ^= (_TIF_ABI_PENDING | _TIF_32BIT);
+#endif
 
-#ifndef CONFIG_SMP
-	if (last_task_used_math == current)
-		last_task_used_math = NULL;
-#ifdef CONFIG_ALTIVEC
-	if (last_task_used_altivec == current)
-		last_task_used_altivec = NULL;
-#endif /* CONFIG_ALTIVEC */
-#endif /* CONFIG_SMP */
+	discard_lazy_cpu_state();
 
+#ifdef CONFIG_PPC64	/* for now */
 	if (current->thread.dabr) {
 		current->thread.dabr = 0;
 		set_dabr(0);
 	}
+#endif
 }
 
 void
@@ -375,7 +483,6 @@ release_thread(struct task_struct *t)
 {
 }
 
-
 /*
  * This gets called before we allocate a new thread and copy
  * the current task into it.
@@ -384,36 +491,44 @@ void prepare_to_copy(struct task_struct *tsk)
 {
 	flush_fp_to_thread(current);
 	flush_altivec_to_thread(current);
+	flush_spe_to_thread(current);
 }
 
 /*
  * Copy a thread..
  */
-int
-copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
-	    unsigned long unused, struct task_struct *p, struct pt_regs *regs)
+int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
+		unsigned long unused, struct task_struct *p,
+		struct pt_regs *regs)
 {
 	struct pt_regs *childregs, *kregs;
 	extern void ret_from_fork(void);
 	unsigned long sp = (unsigned long)p->thread_info + THREAD_SIZE;
 
+	CHECK_FULL_REGS(regs);
 	/* Copy registers */
 	sp -= sizeof(struct pt_regs);
 	childregs = (struct pt_regs *) sp;
 	*childregs = *regs;
 	if ((childregs->msr & MSR_PR) == 0) {
-		/* for kernel thread, set stackptr in new task */
+		/* for kernel thread, set `current' and stackptr in new task */
 		childregs->gpr[1] = sp + sizeof(struct pt_regs);
-		p->thread.regs = NULL;	/* no user register state */
+#ifdef CONFIG_PPC32
+		childregs->gpr[2] = (unsigned long) p;
+#else
 		clear_ti_thread_flag(p->thread_info, TIF_32BIT);
+#endif
+		p->thread.regs = NULL;	/* no user register state */
 	} else {
 		childregs->gpr[1] = usp;
 		p->thread.regs = childregs;
 		if (clone_flags & CLONE_SETTLS) {
-			if (test_thread_flag(TIF_32BIT))
-				childregs->gpr[2] = childregs->gpr[6];
-			else
+#ifdef CONFIG_PPC64
+			if (!test_thread_flag(TIF_32BIT))
 				childregs->gpr[13] = childregs->gpr[6];
+			else
+#endif
+				childregs->gpr[2] = childregs->gpr[6];
 		}
 	}
 	childregs->gpr[3] = 0;  /* Result from fork() */
@@ -431,14 +546,14 @@ copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
 	kregs = (struct pt_regs *) sp;
 	sp -= STACK_FRAME_OVERHEAD;
 	p->thread.ksp = sp;
+
+#ifdef CONFIG_PPC64
 	if (cpu_has_feature(CPU_FTR_SLB)) {
 		unsigned long sp_vsid = get_kernel_vsid(sp);
+		unsigned long llp = mmu_psize_defs[mmu_linear_psize].sllp;
 
 		sp_vsid <<= SLB_VSID_SHIFT;
-		sp_vsid |= SLB_VSID_KERNEL;
-		if (cpu_has_feature(CPU_FTR_16M_PAGE))
-			sp_vsid |= SLB_VSID_L;
-
+		sp_vsid |= SLB_VSID_KERNEL | llp;
 		p->thread.ksp_vsid = sp_vsid;
 	}
 
@@ -449,6 +564,10 @@ copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
 	 * function.
  	 */
 	kregs->nip = *((unsigned long *)ret_from_fork);
+#else
+	kregs->nip = (unsigned long)ret_from_fork;
+	p->thread.last_syscall = -1;
+#endif
 
 	return 0;
 }
@@ -456,30 +575,17 @@ copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
 /*
  * Set up a thread for executing a new program
  */
-void start_thread(struct pt_regs *regs, unsigned long fdptr, unsigned long sp)
+void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp)
 {
-	unsigned long entry, toc, load_addr = regs->gpr[2];
+#ifdef CONFIG_PPC64
+	unsigned long load_addr = regs->gpr[2];	/* saved by ELF_PLAT_INIT */
+#endif
 
-	/* fdptr is a relocated pointer to the function descriptor for
-         * the elf _start routine.  The first entry in the function
-         * descriptor is the entry address of _start and the second
-         * entry is the TOC value we need to use.
-         */
 	set_fs(USER_DS);
-	__get_user(entry, (unsigned long __user *)fdptr);
-	__get_user(toc, (unsigned long __user *)fdptr+1);
-
-	/* Check whether the e_entry function descriptor entries
-	 * need to be relocated before we can use them.
-	 */
-	if (load_addr != 0) {
-		entry += load_addr;
-		toc   += load_addr;
-	}
 
 	/*
 	 * If we exec out of a kernel thread then thread.regs will not be
-	 * set. Do it now.
+	 * set.  Do it now.
 	 */
 	if (!current->thread.regs) {
 		unsigned long childregs = (unsigned long)current->thread_info +
@@ -488,36 +594,90 @@ void start_thread(struct pt_regs *regs, unsigned long fdptr, unsigned long sp)
 		current->thread.regs = (struct pt_regs *)childregs;
 	}
 
-	regs->nip = entry;
+	memset(regs->gpr, 0, sizeof(regs->gpr));
+	regs->ctr = 0;
+	regs->link = 0;
+	regs->xer = 0;
+	regs->ccr = 0;
 	regs->gpr[1] = sp;
-	regs->gpr[2] = toc;
-	regs->msr = MSR_USER64;
-#ifndef CONFIG_SMP
-	if (last_task_used_math == current)
-		last_task_used_math = 0;
-#endif /* CONFIG_SMP */
+
+#ifdef CONFIG_PPC32
+	regs->mq = 0;
+	regs->nip = start;
+	regs->msr = MSR_USER;
+#else
+	if (!test_thread_flag(TIF_32BIT)) {
+		unsigned long entry, toc;
+
+		/* start is a relocated pointer to the function descriptor for
+		 * the elf _start routine.  The first entry in the function
+		 * descriptor is the entry address of _start and the second
+		 * entry is the TOC value we need to use.
+		 */
+		__get_user(entry, (unsigned long __user *)start);
+		__get_user(toc, (unsigned long __user *)start+1);
+
+		/* Check whether the e_entry function descriptor entries
+		 * need to be relocated before we can use them.
+		 */
+		if (load_addr != 0) {
+			entry += load_addr;
+			toc   += load_addr;
+		}
+		regs->nip = entry;
+		regs->gpr[2] = toc;
+		regs->msr = MSR_USER64;
+	} else {
+		regs->nip = start;
+		regs->gpr[2] = 0;
+		regs->msr = MSR_USER32;
+	}
+#endif
+
+	discard_lazy_cpu_state();
 	memset(current->thread.fpr, 0, sizeof(current->thread.fpr));
-	current->thread.fpscr = 0;
+	current->thread.fpscr.val = 0;
 #ifdef CONFIG_ALTIVEC
-#ifndef CONFIG_SMP
-	if (last_task_used_altivec == current)
-		last_task_used_altivec = 0;
-#endif /* CONFIG_SMP */
 	memset(current->thread.vr, 0, sizeof(current->thread.vr));
-	current->thread.vscr.u[0] = 0;
-	current->thread.vscr.u[1] = 0;
-	current->thread.vscr.u[2] = 0;
+	memset(&current->thread.vscr, 0, sizeof(current->thread.vscr));
 	current->thread.vscr.u[3] = 0x00010000; /* Java mode disabled */
 	current->thread.vrsave = 0;
 	current->thread.used_vr = 0;
 #endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_SPE
+	memset(current->thread.evr, 0, sizeof(current->thread.evr));
+	current->thread.acc = 0;
+	current->thread.spefscr = 0;
+	current->thread.used_spe = 0;
+#endif /* CONFIG_SPE */
 }
-EXPORT_SYMBOL(start_thread);
+
+#define PR_FP_ALL_EXCEPT (PR_FP_EXC_DIV | PR_FP_EXC_OVF | PR_FP_EXC_UND \
+		| PR_FP_EXC_RES | PR_FP_EXC_INV)
 
 int set_fpexc_mode(struct task_struct *tsk, unsigned int val)
 {
 	struct pt_regs *regs = tsk->thread.regs;
 
+	/* This is a bit hairy.  If we are an SPE enabled  processor
+	 * (have embedded fp) we store the IEEE exception enable flags in
+	 * fpexc_mode.  fpexc_mode is also used for setting FP exception
+	 * mode (asyn, precise, disabled) for 'Classic' FP. */
+	if (val & PR_FP_EXC_SW_ENABLE) {
+#ifdef CONFIG_SPE
+		tsk->thread.fpexc_mode = val &
+			(PR_FP_EXC_SW_ENABLE | PR_FP_ALL_EXCEPT);
+		return 0;
+#else
+		return -EINVAL;
+#endif
+	}
+
+	/* on a CONFIG_SPE this does not hurt us.  The bits that
+	 * __pack_fe01 use do not overlap with bits used for
+	 * PR_FP_EXC_SW_ENABLE.  Additionally, the MSR[FE0,FE1] bits
+	 * on CONFIG_SPE implementations are reserved so writing to
+	 * them does not change anything */
 	if (val > PR_FP_EXC_PRECISE)
 		return -EINVAL;
 	tsk->thread.fpexc_mode = __pack_fe01(val);
@@ -531,38 +691,41 @@ int get_fpexc_mode(struct task_struct *tsk, unsigned long adr)
 {
 	unsigned int val;
 
-	val = __unpack_fe01(tsk->thread.fpexc_mode);
+	if (tsk->thread.fpexc_mode & PR_FP_EXC_SW_ENABLE)
+#ifdef CONFIG_SPE
+		val = tsk->thread.fpexc_mode;
+#else
+		return -EINVAL;
+#endif
+	else
+		val = __unpack_fe01(tsk->thread.fpexc_mode);
 	return put_user(val, (unsigned int __user *) adr);
 }
 
-int sys_clone(unsigned long clone_flags, unsigned long p2, unsigned long p3,
-	      unsigned long p4, unsigned long p5, unsigned long p6,
+#define TRUNC_PTR(x)	((typeof(x))(((unsigned long)(x)) & 0xffffffff))
+
+int sys_clone(unsigned long clone_flags, unsigned long usp,
+	      int __user *parent_tidp, void __user *child_threadptr,
+	      int __user *child_tidp, int p6,
 	      struct pt_regs *regs)
 {
-	unsigned long parent_tidptr = 0;
-	unsigned long child_tidptr = 0;
-
-	if (p2 == 0)
-		p2 = regs->gpr[1];	/* stack pointer for child */
-
-	if (clone_flags & (CLONE_PARENT_SETTID | CLONE_CHILD_SETTID |
-			   CLONE_CHILD_CLEARTID)) {
-		parent_tidptr = p3;
-		child_tidptr = p5;
-		if (test_thread_flag(TIF_32BIT)) {
-			parent_tidptr &= 0xffffffff;
-			child_tidptr &= 0xffffffff;
-		}
+	CHECK_FULL_REGS(regs);
+	if (usp == 0)
+		usp = regs->gpr[1];	/* stack pointer for child */
+#ifdef CONFIG_PPC64
+	if (test_thread_flag(TIF_32BIT)) {
+		parent_tidp = TRUNC_PTR(parent_tidp);
+		child_tidp = TRUNC_PTR(child_tidp);
 	}
-
-	return do_fork(clone_flags, p2, regs, 0,
-		    (int __user *)parent_tidptr, (int __user *)child_tidptr);
+#endif
+ 	return do_fork(clone_flags, usp, regs, 0, parent_tidp, child_tidp);
 }
 
 int sys_fork(unsigned long p1, unsigned long p2, unsigned long p3,
 	     unsigned long p4, unsigned long p5, unsigned long p6,
 	     struct pt_regs *regs)
 {
+	CHECK_FULL_REGS(regs);
 	return do_fork(SIGCHLD, regs->gpr[1], regs, 0, NULL, NULL);
 }
 
@@ -570,8 +733,9 @@ int sys_vfork(unsigned long p1, unsigned long p2, unsigned long p3,
 	      unsigned long p4, unsigned long p5, unsigned long p6,
 	      struct pt_regs *regs)
 {
-	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->gpr[1], regs, 0,
-	            NULL, NULL);
+	CHECK_FULL_REGS(regs);
+	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->gpr[1],
+			regs, 0, NULL, NULL);
 }
 
 int sys_execve(unsigned long a0, unsigned long a1, unsigned long a2,
@@ -579,30 +743,27 @@ int sys_execve(unsigned long a0, unsigned long a1, unsigned long a2,
 	       struct pt_regs *regs)
 {
 	int error;
-	char * filename;
-	
+	char *filename;
+
 	filename = getname((char __user *) a0);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
 		goto out;
 	flush_fp_to_thread(current);
 	flush_altivec_to_thread(current);
+	flush_spe_to_thread(current);
 	error = do_execve(filename, (char __user * __user *) a1,
-				    (char __user * __user *) a2, regs);
-  
+			  (char __user * __user *) a2, regs);
 	if (error == 0) {
 		task_lock(current);
 		current->ptrace &= ~PT_DTRACE;
 		task_unlock(current);
 	}
 	putname(filename);
-
 out:
 	return error;
 }
 
-static int kstack_depth_to_print = 64;
-
 static int validate_sp(unsigned long sp, struct task_struct *p,
 		       unsigned long nbytes)
 {
@@ -627,6 +788,20 @@ static int validate_sp(unsigned long sp, struct task_struct *p,
 	return 0;
 }
 
+#ifdef CONFIG_PPC64
+#define MIN_STACK_FRAME	112	/* same as STACK_FRAME_OVERHEAD, in fact */
+#define FRAME_LR_SAVE	2
+#define INT_FRAME_SIZE	(sizeof(struct pt_regs) + STACK_FRAME_OVERHEAD + 288)
+#define REGS_MARKER	0x7265677368657265ul
+#define FRAME_MARKER	12
+#else
+#define MIN_STACK_FRAME	16
+#define FRAME_LR_SAVE	1
+#define INT_FRAME_SIZE	(sizeof(struct pt_regs) + STACK_FRAME_OVERHEAD)
+#define REGS_MARKER	0x72656773ul
+#define FRAME_MARKER	2
+#endif
+
 unsigned long get_wchan(struct task_struct *p)
 {
 	unsigned long ip, sp;
@@ -636,15 +811,15 @@ unsigned long get_wchan(struct task_struct *p)
 		return 0;
 
 	sp = p->thread.ksp;
-	if (!validate_sp(sp, p, 112))
+	if (!validate_sp(sp, p, MIN_STACK_FRAME))
 		return 0;
 
 	do {
 		sp = *(unsigned long *)sp;
-		if (!validate_sp(sp, p, 112))
+		if (!validate_sp(sp, p, MIN_STACK_FRAME))
 			return 0;
 		if (count > 0) {
-			ip = *(unsigned long *)(sp + 16);
+			ip = ((unsigned long *)sp)[FRAME_LR_SAVE];
 			if (!in_sched_functions(ip))
 				return ip;
 		}
@@ -653,33 +828,35 @@ unsigned long get_wchan(struct task_struct *p)
 }
 EXPORT_SYMBOL(get_wchan);
 
-void show_stack(struct task_struct *p, unsigned long *_sp)
+static int kstack_depth_to_print = 64;
+
+void show_stack(struct task_struct *tsk, unsigned long *stack)
 {
-	unsigned long ip, newsp, lr;
+	unsigned long sp, ip, lr, newsp;
 	int count = 0;
-	unsigned long sp = (unsigned long)_sp;
 	int firstframe = 1;
 
+	sp = (unsigned long) stack;
+	if (tsk == NULL)
+		tsk = current;
 	if (sp == 0) {
-		if (p) {
-			sp = p->thread.ksp;
-		} else {
-			sp = __get_SP();
-			p = current;
-		}
+		if (tsk == current)
+			asm("mr %0,1" : "=r" (sp));
+		else
+			sp = tsk->thread.ksp;
 	}
 
 	lr = 0;
 	printk("Call Trace:\n");
 	do {
-		if (!validate_sp(sp, p, 112))
+		if (!validate_sp(sp, tsk, MIN_STACK_FRAME))
 			return;
 
-		_sp = (unsigned long *) sp;
-		newsp = _sp[0];
-		ip = _sp[2];
+		stack = (unsigned long *) sp;
+		newsp = stack[0];
+		ip = stack[FRAME_LR_SAVE];
 		if (!firstframe || ip != lr) {
-			printk("[%016lx] [%016lx] ", sp, ip);
+			printk("["REG"] ["REG"] ", sp, ip);
 			print_symbol("%s", ip);
 			if (firstframe)
 				printk(" (unreliable)");
@@ -691,8 +868,8 @@ void show_stack(struct task_struct *p, unsigned long *_sp)
 		 * See if this is an exception frame.
 		 * We look for the "regshere" marker in the current frame.
 		 */
-		if (validate_sp(sp, p, sizeof(struct pt_regs) + 400)
-		    && _sp[12] == 0x7265677368657265ul) {
+		if (validate_sp(sp, tsk, INT_FRAME_SIZE)
+		    && stack[FRAME_MARKER] == REGS_MARKER) {
 			struct pt_regs *regs = (struct pt_regs *)
 				(sp + STACK_FRAME_OVERHEAD);
 			printk("--- Exception: %lx", regs->trap);
@@ -708,6 +885,6 @@ void show_stack(struct task_struct *p, unsigned long *_sp)
 
 void dump_stack(void)
 {
-	show_stack(current, (unsigned long *)__get_SP());
+	show_stack(current, NULL);
 }
 EXPORT_SYMBOL(dump_stack);
diff --git a/arch/ppc64/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 7035deb6de92..3bf968e74095 100644
--- a/arch/ppc64/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -1,10 +1,8 @@
 /*
- * 
- *
- * Procedures for interfacing to Open Firmware.
+ * Procedures for creating, accessing and interpreting the device tree.
  *
  * Paul Mackerras	August 1996.
- * Copyright (C) 1996 Paul Mackerras.
+ * Copyright (C) 1996-2005 Paul Mackerras.
  * 
  *  Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner.
  *    {engebret|bergner}@us.ibm.com 
@@ -35,7 +33,6 @@
 #include <asm/prom.h>
 #include <asm/rtas.h>
 #include <asm/lmb.h>
-#include <asm/abs_addr.h>
 #include <asm/page.h>
 #include <asm/processor.h>
 #include <asm/irq.h>
@@ -46,15 +43,14 @@
 #include <asm/pgtable.h>
 #include <asm/pci.h>
 #include <asm/iommu.h>
-#include <asm/bootinfo.h>
-#include <asm/ppcdebug.h>
 #include <asm/btext.h>
 #include <asm/sections.h>
 #include <asm/machdep.h>
 #include <asm/pSeries_reconfig.h>
+#include <asm/pci-bridge.h>
 
 #ifdef DEBUG
-#define DBG(fmt...) udbg_printf(fmt)
+#define DBG(fmt...) printk(KERN_ERR fmt)
 #else
 #define DBG(fmt...)
 #endif
@@ -75,14 +71,15 @@ struct isa_reg_property {
 typedef int interpret_func(struct device_node *, unsigned long *,
 			   int, int, int);
 
-extern struct rtas_t rtas;
-extern struct lmb lmb;
-extern unsigned long klimit;
-
 static int __initdata dt_root_addr_cells;
 static int __initdata dt_root_size_cells;
+
+#ifdef CONFIG_PPC64
 static int __initdata iommu_is_off;
 int __initdata iommu_force_on;
+unsigned long tce_alloc_start, tce_alloc_end;
+#endif
+
 typedef u32 cell_t;
 
 #if 0
@@ -101,6 +98,9 @@ static DEFINE_RWLOCK(devtree_lock);
 /* export that to outside world */
 struct device_node *of_chosen;
 
+struct device_node *dflt_interrupt_controller;
+int num_interrupt_controllers;
+
 /*
  * Wrapper for allocating memory for various data that needs to be
  * attached to device nodes as they are processed at boot or when
@@ -143,7 +143,18 @@ static struct device_node * __devinit intr_parent(struct device_node *p)
 	parp = (phandle *) get_property(p, "interrupt-parent", NULL);
 	if (parp == NULL)
 		return p->parent;
-	return find_phandle(*parp);
+	p = find_phandle(*parp);
+	if (p != NULL)
+		return p;
+	/*
+	 * On a powermac booted with BootX, we don't get to know the
+	 * phandles for any nodes, so find_phandle will return NULL.
+	 * Fortunately these machines only have one interrupt controller
+	 * so there isn't in fact any ambiguity.  -- paulus
+	 */
+	if (num_interrupt_controllers == 1)
+		p = dflt_interrupt_controller;
+	return p;
 }
 
 /*
@@ -223,6 +234,9 @@ static int __devinit map_interrupt(unsigned int **irq, struct device_node **ictr
 			/* grab the interrupt parent */
 			ipar = find_phandle((phandle) *imap++);
 			--imaplen;
+			if (ipar == NULL && num_interrupt_controllers == 1)
+				/* cope with BootX not giving us phandles */
+				ipar = dflt_interrupt_controller;
 			if (ipar == NULL) {
 				printk("oops, no int parent %x in map of %s\n",
 				       imap[-1], p->full_name);
@@ -273,16 +287,63 @@ static int __devinit map_interrupt(unsigned int **irq, struct device_node **ictr
 	return nintrc;
 }
 
+static unsigned char map_isa_senses[4] = {
+	IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE,
+	IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE,
+	IRQ_SENSE_EDGE  | IRQ_POLARITY_NEGATIVE,
+	IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE
+};
+
+static unsigned char map_mpic_senses[4] = {
+	IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE,
+	IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE,
+	/* 2 seems to be used for the 8259 cascade... */
+	IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE,
+	IRQ_SENSE_EDGE  | IRQ_POLARITY_NEGATIVE,
+};
+
 static int __devinit finish_node_interrupts(struct device_node *np,
 					    unsigned long *mem_start,
 					    int measure_only)
 {
 	unsigned int *ints;
 	int intlen, intrcells, intrcount;
-	int i, j, n;
+	int i, j, n, sense;
 	unsigned int *irq, virq;
 	struct device_node *ic;
 
+	if (num_interrupt_controllers == 0) {
+		/*
+		 * Old machines just have a list of interrupt numbers
+		 * and no interrupt-controller nodes.
+		 */
+		ints = (unsigned int *) get_property(np, "AAPL,interrupts",
+						     &intlen);
+		/* XXX old interpret_pci_props looked in parent too */
+		/* XXX old interpret_macio_props looked for interrupts
+		   before AAPL,interrupts */
+		if (ints == NULL)
+			ints = (unsigned int *) get_property(np, "interrupts",
+							     &intlen);
+		if (ints == NULL)
+			return 0;
+
+		np->n_intrs = intlen / sizeof(unsigned int);
+		np->intrs = prom_alloc(np->n_intrs * sizeof(np->intrs[0]),
+				       mem_start);
+		if (!np->intrs)
+			return -ENOMEM;
+		if (measure_only)
+			return 0;
+
+		for (i = 0; i < np->n_intrs; ++i) {
+			np->intrs[i].line = *ints++;
+			np->intrs[i].sense = IRQ_SENSE_LEVEL
+				| IRQ_POLARITY_NEGATIVE;
+		}
+		return 0;
+	}
+
 	ints = (unsigned int *) get_property(np, "interrupts", &intlen);
 	if (ints == NULL)
 		return 0;
@@ -305,18 +366,25 @@ static int __devinit finish_node_interrupts(struct device_node *np,
 		/* don't map IRQ numbers under a cascaded 8259 controller */
 		if (ic && device_is_compatible(ic, "chrp,iic")) {
 			np->intrs[intrcount].line = irq[0];
+			sense = (n > 1)? (irq[1] & 3): 3;
+			np->intrs[intrcount].sense = map_isa_senses[sense];
 		} else {
 			virq = virt_irq_create_mapping(irq[0]);
+#ifdef CONFIG_PPC64
 			if (virq == NO_IRQ) {
 				printk(KERN_CRIT "Could not allocate interrupt"
 				       " number for %s\n", np->full_name);
 				continue;
 			}
+#endif
 			np->intrs[intrcount].line = irq_offset_up(virq);
+			sense = (n > 1)? (irq[1] & 3): 1;
+			np->intrs[intrcount].sense = map_mpic_senses[sense];
 		}
 
+#ifdef CONFIG_PPC64
 		/* We offset irq numbers for the u3 MPIC by 128 in PowerMac */
-		if (systemcfg->platform == PLATFORM_POWERMAC && ic && ic->parent) {
+		if (_machine == PLATFORM_POWERMAC && ic && ic->parent) {
 			char *name = get_property(ic->parent, "name", NULL);
 			if (name && !strcmp(name, "u3"))
 				np->intrs[intrcount].line += 128;
@@ -325,9 +393,7 @@ static int __devinit finish_node_interrupts(struct device_node *np,
 				   the k2-sata-root */
 				break;
 		}
-		np->intrs[intrcount].sense = 1;
-		if (n > 1)
-			np->intrs[intrcount].sense = irq[1];
+#endif
 		if (n > 2) {
 			printk("hmmm, got %d intr cells for %s:", n,
 			       np->full_name);
@@ -577,6 +643,30 @@ out:
 	return rc;
 }
 
+static void __init scan_interrupt_controllers(void)
+{
+	struct device_node *np;
+	int n = 0;
+	char *name, *ic;
+	int iclen;
+
+	for (np = allnodes; np != NULL; np = np->allnext) {
+		ic = get_property(np, "interrupt-controller", &iclen);
+		name = get_property(np, "name", NULL);
+		/* checking iclen makes sure we don't get a false
+		   match on /chosen.interrupt_controller */
+		if ((name != NULL
+		     && strcmp(name, "interrupt-controller") == 0)
+		    || (ic != NULL && iclen == 0
+			&& strcmp(name, "AppleKiwi"))) {
+			if (n == 0)
+				dflt_interrupt_controller = np;
+			++n;
+		}
+	}
+	num_interrupt_controllers = n;
+}
+
 /**
  * finish_device_tree is called once things are running normally
  * (i.e. with text and data mapped to the address they were linked at).
@@ -590,13 +680,11 @@ void __init finish_device_tree(void)
 
 	DBG(" -> finish_device_tree\n");
 
-	if (ppc64_interrupt_controller == IC_INVALID) {
-		DBG("failed to configure interrupt controller type\n");
-		panic("failed to configure interrupt controller type\n");
-	}
-	
+#ifdef CONFIG_PPC64
 	/* Initialize virtual IRQ map */
 	virt_irq_init();
+#endif
+	scan_interrupt_controllers();
 
 	/*
 	 * Finish device-tree (pre-parsing some properties etc...)
@@ -611,17 +699,13 @@ void __init finish_device_tree(void)
 	size = 16;
 	finish_node(allnodes, &size, NULL, 0, 0, 1);
 	size -= 16;
-	end = start = (unsigned long)abs_to_virt(lmb_alloc(size, 128));
+	end = start = (unsigned long) __va(lmb_alloc(size, 128));
 	finish_node(allnodes, &end, NULL, 0, 0, 0);
 	BUG_ON(end != start + size);
 
 	DBG(" <- finish_device_tree\n");
 }
 
-#ifdef DEBUG
-#define printk udbg_printf
-#endif
-
 static inline char *find_flat_dt_string(u32 offset)
 {
 	return ((char *)initial_boot_params) +
@@ -633,10 +717,10 @@ static inline char *find_flat_dt_string(u32 offset)
  * used to extract the memory informations at boot before we can
  * unflatten the tree
  */
-static int __init scan_flat_dt(int (*it)(unsigned long node,
-					 const char *uname, int depth,
-					 void *data),
-			       void *data)
+int __init of_scan_flat_dt(int (*it)(unsigned long node,
+				     const char *uname, int depth,
+				     void *data),
+			   void *data)
 {
 	unsigned long p = ((unsigned long)initial_boot_params) +
 		initial_boot_params->off_dt_struct;
@@ -693,8 +777,8 @@ static int __init scan_flat_dt(int (*it)(unsigned long node,
  * This  function can be used within scan_flattened_dt callback to get
  * access to properties
  */
-static void* __init get_flat_dt_prop(unsigned long node, const char *name,
-				     unsigned long *size)
+void* __init of_get_flat_dt_prop(unsigned long node, const char *name,
+				 unsigned long *size)
 {
 	unsigned long p = node;
 
@@ -954,11 +1038,11 @@ void __init unflatten_device_tree(void)
 		DBG("Couldn't allocate memory with lmb_alloc()!\n");
 		panic("Couldn't allocate memory with lmb_alloc()!\n");
 	}
-	mem = (unsigned long)abs_to_virt(mem);
+	mem = (unsigned long) __va(mem);
 
 	((u32 *)mem)[size / 4] = 0xdeadbeef;
 
-	DBG("  unflattening...\n", mem);
+	DBG("  unflattening %lx...\n", mem);
 
 	/* Second pass, do actual unflattening */
 	start = ((unsigned long)initial_boot_params) +
@@ -973,6 +1057,8 @@ void __init unflatten_device_tree(void)
 
 	/* Get pointer to OF "/chosen" node for use everywhere */
 	of_chosen = of_find_node_by_path("/chosen");
+	if (of_chosen == NULL)
+		of_chosen = of_find_node_by_path("/chosen@0");
 
 	/* Retreive command line */
 	if (of_chosen != NULL) {
@@ -994,66 +1080,60 @@ void __init unflatten_device_tree(void)
 static int __init early_init_dt_scan_cpus(unsigned long node,
 					  const char *uname, int depth, void *data)
 {
-	char *type = get_flat_dt_prop(node, "device_type", NULL);
 	u32 *prop;
 	unsigned long size;
+	char *type = of_get_flat_dt_prop(node, "device_type", &size);
 
 	/* We are scanning "cpu" nodes only */
 	if (type == NULL || strcmp(type, "cpu") != 0)
 		return 0;
 
-	/* On LPAR, look for the first ibm,pft-size property for the  hash table size
-	 */
-	if (systemcfg->platform == PLATFORM_PSERIES_LPAR && ppc64_pft_size == 0) {
-		u32 *pft_size;
-		pft_size = (u32 *)get_flat_dt_prop(node, "ibm,pft-size", NULL);
-		if (pft_size != NULL) {
-			/* pft_size[0] is the NUMA CEC cookie */
-			ppc64_pft_size = pft_size[1];
-		}
-	}
-
+	boot_cpuid = 0;
+	boot_cpuid_phys = 0;
 	if (initial_boot_params && initial_boot_params->version >= 2) {
 		/* version 2 of the kexec param format adds the phys cpuid
 		 * of booted proc.
 		 */
 		boot_cpuid_phys = initial_boot_params->boot_cpuid_phys;
-		boot_cpuid = 0;
 	} else {
-		/* Check if it's the boot-cpu, set it's hw index in paca now */
-		if (get_flat_dt_prop(node, "linux,boot-cpu", NULL) != NULL) {
-			u32 *prop = get_flat_dt_prop(node, "reg", NULL);
-			set_hard_smp_processor_id(0, prop == NULL ? 0 : *prop);
-			boot_cpuid_phys = get_hard_smp_processor_id(0);
+		/* Check if it's the boot-cpu, set it's hw index now */
+		if (of_get_flat_dt_prop(node,
+					"linux,boot-cpu", NULL) != NULL) {
+			prop = of_get_flat_dt_prop(node, "reg", NULL);
+			if (prop != NULL)
+				boot_cpuid_phys = *prop;
 		}
 	}
+	set_hard_smp_processor_id(0, boot_cpuid_phys);
 
 #ifdef CONFIG_ALTIVEC
 	/* Check if we have a VMX and eventually update CPU features */
-	prop = (u32 *)get_flat_dt_prop(node, "ibm,vmx", NULL);
+	prop = (u32 *)of_get_flat_dt_prop(node, "ibm,vmx", NULL);
 	if (prop && (*prop) > 0) {
 		cur_cpu_spec->cpu_features |= CPU_FTR_ALTIVEC;
 		cur_cpu_spec->cpu_user_features |= PPC_FEATURE_HAS_ALTIVEC;
 	}
 
 	/* Same goes for Apple's "altivec" property */
-	prop = (u32 *)get_flat_dt_prop(node, "altivec", NULL);
+	prop = (u32 *)of_get_flat_dt_prop(node, "altivec", NULL);
 	if (prop) {
 		cur_cpu_spec->cpu_features |= CPU_FTR_ALTIVEC;
 		cur_cpu_spec->cpu_user_features |= PPC_FEATURE_HAS_ALTIVEC;
 	}
 #endif /* CONFIG_ALTIVEC */
 
+#ifdef CONFIG_PPC_PSERIES
 	/*
 	 * Check for an SMT capable CPU and set the CPU feature. We do
 	 * this by looking at the size of the ibm,ppc-interrupt-server#s
 	 * property
 	 */
-	prop = (u32 *)get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s",
+	prop = (u32 *)of_get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s",
 				       &size);
 	cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT;
 	if (prop && ((size / sizeof(u32)) > 1))
 		cur_cpu_spec->cpu_features |= CPU_FTR_SMT;
+#endif
 
 	return 0;
 }
@@ -1062,37 +1142,42 @@ static int __init early_init_dt_scan_chosen(unsigned long node,
 					    const char *uname, int depth, void *data)
 {
 	u32 *prop;
-	u64 *prop64;
-	extern unsigned long memory_limit, tce_alloc_start, tce_alloc_end;
+	unsigned long *lprop;
 
 	DBG("search \"chosen\", depth: %d, uname: %s\n", depth, uname);
 
-	if (depth != 1 || strcmp(uname, "chosen") != 0)
+	if (depth != 1 ||
+	    (strcmp(uname, "chosen") != 0 && strcmp(uname, "chosen@0") != 0))
 		return 0;
 
 	/* get platform type */
-	prop = (u32 *)get_flat_dt_prop(node, "linux,platform", NULL);
+	prop = (u32 *)of_get_flat_dt_prop(node, "linux,platform", NULL);
 	if (prop == NULL)
 		return 0;
-	systemcfg->platform = *prop;
+#ifdef CONFIG_PPC_MULTIPLATFORM
+	_machine = *prop;
+#endif
 
+#ifdef CONFIG_PPC64
 	/* check if iommu is forced on or off */
-	if (get_flat_dt_prop(node, "linux,iommu-off", NULL) != NULL)
+	if (of_get_flat_dt_prop(node, "linux,iommu-off", NULL) != NULL)
 		iommu_is_off = 1;
-	if (get_flat_dt_prop(node, "linux,iommu-force-on", NULL) != NULL)
+	if (of_get_flat_dt_prop(node, "linux,iommu-force-on", NULL) != NULL)
 		iommu_force_on = 1;
+#endif
 
- 	prop64 = (u64*)get_flat_dt_prop(node, "linux,memory-limit", NULL);
- 	if (prop64)
- 		memory_limit = *prop64;
-
- 	prop64 = (u64*)get_flat_dt_prop(node, "linux,tce-alloc-start", NULL);
- 	if (prop64)
- 		tce_alloc_start = *prop64;
-
- 	prop64 = (u64*)get_flat_dt_prop(node, "linux,tce-alloc-end", NULL);
- 	if (prop64)
- 		tce_alloc_end = *prop64;
+ 	lprop = of_get_flat_dt_prop(node, "linux,memory-limit", NULL);
+ 	if (lprop)
+ 		memory_limit = *lprop;
+
+#ifdef CONFIG_PPC64
+ 	lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-start", NULL);
+ 	if (lprop)
+ 		tce_alloc_start = *lprop;
+ 	lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-end", NULL);
+ 	if (lprop)
+ 		tce_alloc_end = *lprop;
+#endif
 
 #ifdef CONFIG_PPC_RTAS
 	/* To help early debugging via the front panel, we retreive a minimal
@@ -1101,9 +1186,9 @@ static int __init early_init_dt_scan_chosen(unsigned long node,
 	{
 		u64 *basep, *entryp;
 
-		basep = (u64*)get_flat_dt_prop(node, "linux,rtas-base", NULL);
-		entryp = (u64*)get_flat_dt_prop(node, "linux,rtas-entry", NULL);
-		prop = (u32*)get_flat_dt_prop(node, "linux,rtas-size", NULL);
+		basep = of_get_flat_dt_prop(node, "linux,rtas-base", NULL);
+		entryp = of_get_flat_dt_prop(node, "linux,rtas-entry", NULL);
+		prop = of_get_flat_dt_prop(node, "linux,rtas-size", NULL);
 		if (basep && entryp && prop) {
 			rtas.base = *basep;
 			rtas.entry = *entryp;
@@ -1124,11 +1209,11 @@ static int __init early_init_dt_scan_root(unsigned long node,
 	if (depth != 0)
 		return 0;
 
-	prop = (u32 *)get_flat_dt_prop(node, "#size-cells", NULL);
+	prop = of_get_flat_dt_prop(node, "#size-cells", NULL);
 	dt_root_size_cells = (prop == NULL) ? 1 : *prop;
 	DBG("dt_root_size_cells = %x\n", dt_root_size_cells);
 
-	prop = (u32 *)get_flat_dt_prop(node, "#address-cells", NULL);
+	prop = of_get_flat_dt_prop(node, "#address-cells", NULL);
 	dt_root_addr_cells = (prop == NULL) ? 2 : *prop;
 	DBG("dt_root_addr_cells = %x\n", dt_root_addr_cells);
 	
@@ -1139,18 +1224,21 @@ static int __init early_init_dt_scan_root(unsigned long node,
 static unsigned long __init dt_mem_next_cell(int s, cell_t **cellp)
 {
 	cell_t *p = *cellp;
-	unsigned long r = 0;
+	unsigned long r;
 
 	/* Ignore more than 2 cells */
-	while (s > 2) {
+	while (s > sizeof(unsigned long) / 4) {
 		p++;
 		s--;
 	}
-	while (s) {
+	r = *p++;
+#ifdef CONFIG_PPC64
+	if (s > 1) {
 		r <<= 32;
 		r |= *(p++);
 		s--;
 	}
+#endif
 
 	*cellp = p;
 	return r;
@@ -1160,21 +1248,28 @@ static unsigned long __init dt_mem_next_cell(int s, cell_t **cellp)
 static int __init early_init_dt_scan_memory(unsigned long node,
 					    const char *uname, int depth, void *data)
 {
-	char *type = get_flat_dt_prop(node, "device_type", NULL);
+	char *type = of_get_flat_dt_prop(node, "device_type", NULL);
 	cell_t *reg, *endp;
 	unsigned long l;
 
 	/* We are scanning "memory" nodes only */
-	if (type == NULL || strcmp(type, "memory") != 0)
+	if (type == NULL) {
+		/*
+		 * The longtrail doesn't have a device_type on the
+		 * /memory node, so look for the node called /memory@0.
+		 */
+		if (depth != 1 || strcmp(uname, "memory@0") != 0)
+			return 0;
+	} else if (strcmp(type, "memory") != 0)
 		return 0;
 
-	reg = (cell_t *)get_flat_dt_prop(node, "reg", &l);
+	reg = (cell_t *)of_get_flat_dt_prop(node, "reg", &l);
 	if (reg == NULL)
 		return 0;
 
 	endp = reg + (l / sizeof(cell_t));
 
-	DBG("memory scan node %s ..., reg size %ld, data: %x %x %x %x, ...\n",
+	DBG("memory scan node %s, reg size %ld, data: %x %x %x %x,\n",
 	    uname, l, reg[0], reg[1], reg[2], reg[3]);
 
 	while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) {
@@ -1186,12 +1281,14 @@ static int __init early_init_dt_scan_memory(unsigned long node,
 		if (size == 0)
 			continue;
 		DBG(" - %lx ,  %lx\n", base, size);
+#ifdef CONFIG_PPC64
 		if (iommu_is_off) {
 			if (base >= 0x80000000ul)
 				continue;
 			if ((base + size) > 0x80000000ul)
 				size = 0x80000000ul - base;
 		}
+#endif
 		lmb_add(base, size);
 	}
 	return 0;
@@ -1199,9 +1296,11 @@ static int __init early_init_dt_scan_memory(unsigned long node,
 
 static void __init early_reserve_mem(void)
 {
-	u64 base, size;
-	u64 *reserve_map = (u64 *)(((unsigned long)initial_boot_params) +
-				   initial_boot_params->off_mem_rsvmap);
+	unsigned long base, size;
+	unsigned long *reserve_map;
+
+	reserve_map = (unsigned long *)(((unsigned long)initial_boot_params) +
+					initial_boot_params->off_mem_rsvmap);
 	while (1) {
 		base = *(reserve_map++);
 		size = *(reserve_map++);
@@ -1224,54 +1323,32 @@ void __init early_init_devtree(void *params)
 	/* Setup flat device-tree pointer */
 	initial_boot_params = params;
 
-	/* By default, hash size is not set */
-	ppc64_pft_size = 0;
-
-	/* Retreive various informations from the /chosen node of the
+	/* Retrieve various informations from the /chosen node of the
 	 * device-tree, including the platform type, initrd location and
 	 * size, TCE reserve, and more ...
 	 */
-	scan_flat_dt(early_init_dt_scan_chosen, NULL);
+	of_scan_flat_dt(early_init_dt_scan_chosen, NULL);
 
 	/* Scan memory nodes and rebuild LMBs */
 	lmb_init();
-	scan_flat_dt(early_init_dt_scan_root, NULL);
-	scan_flat_dt(early_init_dt_scan_memory, NULL);
-	lmb_enforce_memory_limit();
+	of_scan_flat_dt(early_init_dt_scan_root, NULL);
+	of_scan_flat_dt(early_init_dt_scan_memory, NULL);
+	lmb_enforce_memory_limit(memory_limit);
 	lmb_analyze();
-	systemcfg->physicalMemorySize = lmb_phys_mem_size();
 	lmb_reserve(0, __pa(klimit));
 
-	DBG("Phys. mem: %lx\n", systemcfg->physicalMemorySize);
+	DBG("Phys. mem: %lx\n", lmb_phys_mem_size());
 
 	/* Reserve LMB regions used by kernel, initrd, dt, etc... */
 	early_reserve_mem();
 
 	DBG("Scanning CPUs ...\n");
 
-	/* Retreive hash table size from flattened tree plus other
-	 * CPU related informations (altivec support, boot CPU ID, ...)
-	 */
-	scan_flat_dt(early_init_dt_scan_cpus, NULL);
-
-	/* If hash size wasn't obtained above, we calculate it now based on
-	 * the total RAM size
+	/* Retreive CPU related informations from the flat tree
+	 * (altivec support, boot CPU ID, ...)
 	 */
-	if (ppc64_pft_size == 0) {
-		unsigned long rnd_mem_size, pteg_count;
+	of_scan_flat_dt(early_init_dt_scan_cpus, NULL);
 
-		/* round mem_size up to next power of 2 */
-		rnd_mem_size = 1UL << __ilog2(systemcfg->physicalMemorySize);
-		if (rnd_mem_size < systemcfg->physicalMemorySize)
-			rnd_mem_size <<= 1;
-
-		/* # pages / 2 */
-		pteg_count = max(rnd_mem_size >> (12 + 1), 1UL << 11);
-
-		ppc64_pft_size = __ilog2(pteg_count << 7);
-	}
-
-	DBG("Hash pftSize: %x\n", (int)ppc64_pft_size);
 	DBG(" <- early_init_devtree()\n");
 }
 
@@ -1291,6 +1368,7 @@ prom_n_addr_cells(struct device_node* np)
 	/* No #address-cells property for the root node, default to 1 */
 	return 1;
 }
+EXPORT_SYMBOL(prom_n_addr_cells);
 
 int
 prom_n_size_cells(struct device_node* np)
@@ -1306,6 +1384,7 @@ prom_n_size_cells(struct device_node* np)
 	/* No #size-cells property for the root node, default to 1 */
 	return 1;
 }
+EXPORT_SYMBOL(prom_n_size_cells);
 
 /**
  * Work out the sense (active-low level / active-high edge)
@@ -1317,15 +1396,13 @@ void __init prom_get_irq_senses(unsigned char *senses, int off, int max)
 	int i, j;
 
 	/* default to level-triggered */
-	memset(senses, 1, max - off);
+	memset(senses, IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE, max - off);
 
 	for (np = allnodes; np != 0; np = np->allnext) {
 		for (j = 0; j < np->n_intrs; j++) {
 			i = np->intrs[j].line;
 			if (i >= off && i < max)
-				senses[i-off] = np->intrs[j].sense ?
-					IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE :
-					IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE;
+				senses[i-off] = np->intrs[j].sense;
 		}
 	}
 }
@@ -1333,8 +1410,7 @@ void __init prom_get_irq_senses(unsigned char *senses, int off, int max)
 /**
  * Construct and return a list of the device_nodes with a given name.
  */
-struct device_node *
-find_devices(const char *name)
+struct device_node *find_devices(const char *name)
 {
 	struct device_node *head, **prevp, *np;
 
@@ -1353,8 +1429,7 @@ EXPORT_SYMBOL(find_devices);
 /**
  * Construct and return a list of the device_nodes with a given type.
  */
-struct device_node *
-find_type_devices(const char *type)
+struct device_node *find_type_devices(const char *type)
 {
 	struct device_node *head, **prevp, *np;
 
@@ -1373,8 +1448,7 @@ EXPORT_SYMBOL(find_type_devices);
 /**
  * Returns all nodes linked together
  */
-struct device_node *
-find_all_nodes(void)
+struct device_node *find_all_nodes(void)
 {
 	struct device_node *head, **prevp, *np;
 
@@ -1391,8 +1465,7 @@ EXPORT_SYMBOL(find_all_nodes);
 /** Checks if the given "compat" string matches one of the strings in
  * the device's "compatible" property
  */
-int
-device_is_compatible(struct device_node *device, const char *compat)
+int device_is_compatible(struct device_node *device, const char *compat)
 {
 	const char* cp;
 	int cplen, l;
@@ -1417,8 +1490,7 @@ EXPORT_SYMBOL(device_is_compatible);
  * Indicates whether the root node has a given value in its
  * compatible property.
  */
-int
-machine_is_compatible(const char *compat)
+int machine_is_compatible(const char *compat)
 {
 	struct device_node *root;
 	int rc = 0;
@@ -1436,8 +1508,8 @@ EXPORT_SYMBOL(machine_is_compatible);
  * Construct and return a list of the device_nodes with a given type
  * and compatible property.
  */
-struct device_node *
-find_compatible_devices(const char *type, const char *compat)
+struct device_node *find_compatible_devices(const char *type,
+					    const char *compat)
 {
 	struct device_node *head, **prevp, *np;
 
@@ -1459,8 +1531,7 @@ EXPORT_SYMBOL(find_compatible_devices);
 /**
  * Find the device_node with a given full_name.
  */
-struct device_node *
-find_path_device(const char *path)
+struct device_node *find_path_device(const char *path)
 {
 	struct device_node *np;
 
@@ -1751,48 +1822,6 @@ void of_node_put(struct device_node *node)
 EXPORT_SYMBOL(of_node_put);
 
 /*
- * Fix up the uninitialized fields in a new device node:
- * name, type, n_addrs, addrs, n_intrs, intrs, and pci-specific fields
- *
- * A lot of boot-time code is duplicated here, because functions such
- * as finish_node_interrupts, interpret_pci_props, etc. cannot use the
- * slab allocator.
- *
- * This should probably be split up into smaller chunks.
- */
-
-static int of_finish_dynamic_node(struct device_node *node,
-				  unsigned long *unused1, int unused2,
-				  int unused3, int unused4)
-{
-	struct device_node *parent = of_get_parent(node);
-	int err = 0;
-	phandle *ibm_phandle;
-
-	node->name = get_property(node, "name", NULL);
-	node->type = get_property(node, "device_type", NULL);
-
-	if (!parent) {
-		err = -ENODEV;
-		goto out;
-	}
-
-	/* We don't support that function on PowerMac, at least
-	 * not yet
-	 */
-	if (systemcfg->platform == PLATFORM_POWERMAC)
-		return -ENODEV;
-
-	/* fix up new node's linux_phandle field */
-	if ((ibm_phandle = (unsigned int *)get_property(node, "ibm,phandle", NULL)))
-		node->linux_phandle = *ibm_phandle;
-
-out:
-	of_node_put(parent);
-	return err;
-}
-
-/*
  * Plug a device node into the tree and global list.
  */
 void of_attach_node(struct device_node *np)
@@ -1843,7 +1872,51 @@ void of_detach_node(const struct device_node *np)
 	write_unlock(&devtree_lock);
 }
 
-static int prom_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *node)
+#ifdef CONFIG_PPC_PSERIES
+/*
+ * Fix up the uninitialized fields in a new device node:
+ * name, type, n_addrs, addrs, n_intrs, intrs, and pci-specific fields
+ *
+ * A lot of boot-time code is duplicated here, because functions such
+ * as finish_node_interrupts, interpret_pci_props, etc. cannot use the
+ * slab allocator.
+ *
+ * This should probably be split up into smaller chunks.
+ */
+
+static int of_finish_dynamic_node(struct device_node *node,
+				  unsigned long *unused1, int unused2,
+				  int unused3, int unused4)
+{
+	struct device_node *parent = of_get_parent(node);
+	int err = 0;
+	phandle *ibm_phandle;
+
+	node->name = get_property(node, "name", NULL);
+	node->type = get_property(node, "device_type", NULL);
+
+	if (!parent) {
+		err = -ENODEV;
+		goto out;
+	}
+
+	/* We don't support that function on PowerMac, at least
+	 * not yet
+	 */
+	if (_machine == PLATFORM_POWERMAC)
+		return -ENODEV;
+
+	/* fix up new node's linux_phandle field */
+	if ((ibm_phandle = (unsigned int *)get_property(node, "ibm,phandle", NULL)))
+		node->linux_phandle = *ibm_phandle;
+
+out:
+	of_node_put(parent);
+	return err;
+}
+
+static int prom_reconfig_notifier(struct notifier_block *nb,
+				  unsigned long action, void *node)
 {
 	int err;
 
@@ -1872,13 +1945,14 @@ static int __init prom_reconfig_setup(void)
 	return pSeries_reconfig_notifier_register(&prom_reconfig_nb);
 }
 __initcall(prom_reconfig_setup);
+#endif
 
 /*
  * Find a property with a given name for a given node
  * and return the value.
  */
-unsigned char *
-get_property(struct device_node *np, const char *name, int *lenp)
+unsigned char *get_property(struct device_node *np, const char *name,
+			    int *lenp)
 {
 	struct property *pp;
 
@@ -1895,75 +1969,202 @@ EXPORT_SYMBOL(get_property);
 /*
  * Add a property to a node
  */
-void
-prom_add_property(struct device_node* np, struct property* prop)
+int prom_add_property(struct device_node* np, struct property* prop)
 {
-	struct property **next = &np->properties;
+	struct property **next;
 
 	prop->next = NULL;	
-	while (*next)
+	write_lock(&devtree_lock);
+	next = &np->properties;
+	while (*next) {
+		if (strcmp(prop->name, (*next)->name) == 0) {
+			/* duplicate ! don't insert it */
+			write_unlock(&devtree_lock);
+			return -1;
+		}
 		next = &(*next)->next;
+	}
 	*next = prop;
+	write_unlock(&devtree_lock);
+
+#ifdef CONFIG_PROC_DEVICETREE
+	/* try to add to proc as well if it was initialized */
+	if (np->pde)
+		proc_device_tree_add_prop(np->pde, prop);
+#endif /* CONFIG_PROC_DEVICETREE */
+
+	return 0;
 }
 
-#if 0
-void
-print_properties(struct device_node *np)
+/* I quickly hacked that one, check against spec ! */
+static inline unsigned long
+bus_space_to_resource_flags(unsigned int bus_space)
 {
-	struct property *pp;
-	char *cp;
-	int i, n;
-
-	for (pp = np->properties; pp != 0; pp = pp->next) {
-		printk(KERN_INFO "%s", pp->name);
-		for (i = strlen(pp->name); i < 16; ++i)
-			printk(" ");
-		cp = (char *) pp->value;
-		for (i = pp->length; i > 0; --i, ++cp)
-			if ((i > 1 && (*cp < 0x20 || *cp > 0x7e))
-			    || (i == 1 && *cp != 0))
-				break;
-		if (i == 0 && pp->length > 1) {
-			/* looks like a string */
-			printk(" %s\n", (char *) pp->value);
-		} else {
-			/* dump it in hex */
-			n = pp->length;
-			if (n > 64)
-				n = 64;
-			if (pp->length % 4 == 0) {
-				unsigned int *p = (unsigned int *) pp->value;
-
-				n /= 4;
-				for (i = 0; i < n; ++i) {
-					if (i != 0 && (i % 4) == 0)
-						printk("\n                ");
-					printk(" %08x", *p++);
-				}
-			} else {
-				unsigned char *bp = pp->value;
+	u8 space = (bus_space >> 24) & 0xf;
+	if (space == 0)
+		space = 0x02;
+	if (space == 0x02)
+		return IORESOURCE_MEM;
+	else if (space == 0x01)
+		return IORESOURCE_IO;
+	else {
+		printk(KERN_WARNING "prom.c: bus_space_to_resource_flags(), space: %x\n",
+		    	bus_space);
+		return 0;
+	}
+}
 
-				for (i = 0; i < n; ++i) {
-					if (i != 0 && (i % 16) == 0)
-						printk("\n                ");
-					printk(" %02x", *bp++);
+#ifdef CONFIG_PCI
+static struct resource *find_parent_pci_resource(struct pci_dev* pdev,
+						 struct address_range *range)
+{
+	unsigned long mask;
+	int i;
+
+	/* Check this one */
+	mask = bus_space_to_resource_flags(range->space);
+	for (i=0; i<DEVICE_COUNT_RESOURCE; i++) {
+		if ((pdev->resource[i].flags & mask) == mask &&
+			pdev->resource[i].start <= range->address &&
+			pdev->resource[i].end > range->address) {
+				if ((range->address + range->size - 1) > pdev->resource[i].end) {
+					/* Add better message */
+					printk(KERN_WARNING "PCI/OF resource overlap !\n");
+					return NULL;
 				}
+				break;
 			}
-			printk("\n");
-			if (pp->length > 64)
-				printk("                 ... (length = %d)\n",
-				       pp->length);
-		}
 	}
+	if (i == DEVICE_COUNT_RESOURCE)
+		return NULL;
+	return &pdev->resource[i];
 }
-#endif
-
-
-
-
 
+/*
+ * Request an OF device resource. Currently handles child of PCI devices,
+ * or other nodes attached to the root node. Ultimately, put some
+ * link to resources in the OF node.
+ */
+struct resource *request_OF_resource(struct device_node* node, int index,
+				     const char* name_postfix)
+{
+	struct pci_dev* pcidev;
+	u8 pci_bus, pci_devfn;
+	unsigned long iomask;
+	struct device_node* nd;
+	struct resource* parent;
+	struct resource *res = NULL;
+	int nlen, plen;
+
+	if (index >= node->n_addrs)
+		goto fail;
+
+	/* Sanity check on bus space */
+	iomask = bus_space_to_resource_flags(node->addrs[index].space);
+	if (iomask & IORESOURCE_MEM)
+		parent = &iomem_resource;
+	else if (iomask & IORESOURCE_IO)
+		parent = &ioport_resource;
+	else
+		goto fail;
+
+	/* Find a PCI parent if any */
+	nd = node;
+	pcidev = NULL;
+	while (nd) {
+		if (!pci_device_from_OF_node(nd, &pci_bus, &pci_devfn))
+			pcidev = pci_find_slot(pci_bus, pci_devfn);
+		if (pcidev) break;
+		nd = nd->parent;
+	}
+	if (pcidev)
+		parent = find_parent_pci_resource(pcidev, &node->addrs[index]);
+	if (!parent) {
+		printk(KERN_WARNING "request_OF_resource(%s), parent not found\n",
+			node->name);
+		goto fail;
+	}
 
+	res = __request_region(parent, node->addrs[index].address,
+			       node->addrs[index].size, NULL);
+	if (!res)
+		goto fail;
+	nlen = strlen(node->name);
+	plen = name_postfix ? strlen(name_postfix) : 0;
+	res->name = (const char *)kmalloc(nlen+plen+1, GFP_KERNEL);
+	if (res->name) {
+		strcpy((char *)res->name, node->name);
+		if (plen)
+			strcpy((char *)res->name+nlen, name_postfix);
+	}
+	return res;
+fail:
+	return NULL;
+}
+EXPORT_SYMBOL(request_OF_resource);
 
+int release_OF_resource(struct device_node *node, int index)
+{
+	struct pci_dev* pcidev;
+	u8 pci_bus, pci_devfn;
+	unsigned long iomask, start, end;
+	struct device_node* nd;
+	struct resource* parent;
+	struct resource *res = NULL;
+
+	if (index >= node->n_addrs)
+		return -EINVAL;
+
+	/* Sanity check on bus space */
+	iomask = bus_space_to_resource_flags(node->addrs[index].space);
+	if (iomask & IORESOURCE_MEM)
+		parent = &iomem_resource;
+	else if (iomask & IORESOURCE_IO)
+		parent = &ioport_resource;
+	else
+		return -EINVAL;
+
+	/* Find a PCI parent if any */
+	nd = node;
+	pcidev = NULL;
+	while(nd) {
+		if (!pci_device_from_OF_node(nd, &pci_bus, &pci_devfn))
+			pcidev = pci_find_slot(pci_bus, pci_devfn);
+		if (pcidev) break;
+		nd = nd->parent;
+	}
+	if (pcidev)
+		parent = find_parent_pci_resource(pcidev, &node->addrs[index]);
+	if (!parent) {
+		printk(KERN_WARNING "release_OF_resource(%s), parent not found\n",
+			node->name);
+		return -ENODEV;
+	}
 
+	/* Find us in the parent and its childs */
+	res = parent->child;
+	start = node->addrs[index].address;
+	end = start + node->addrs[index].size - 1;
+	while (res) {
+		if (res->start == start && res->end == end &&
+		    (res->flags & IORESOURCE_BUSY))
+		    	break;
+		if (res->start <= start && res->end >= end)
+			res = res->child;
+		else
+			res = res->sibling;
+	}
+	if (!res)
+		return -ENODEV;
 
+	if (res->name) {
+		kfree(res->name);
+		res->name = NULL;
+	}
+	release_resource(res);
+	kfree(res);
 
+	return 0;
+}
+EXPORT_SYMBOL(release_OF_resource);
+#endif /* CONFIG_PCI */
diff --git a/arch/ppc64/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index f252670874a4..bcdc209dca85 100644
--- a/arch/ppc64/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -1,10 +1,8 @@
 /*
- * 
- *
  * Procedures for interfacing to Open Firmware.
  *
  * Paul Mackerras	August 1996.
- * Copyright (C) 1996 Paul Mackerras.
+ * Copyright (C) 1996-2005 Paul Mackerras.
  * 
  *  Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner.
  *    {engebret|bergner}@us.ibm.com 
@@ -33,7 +31,6 @@
 #include <linux/bitops.h>
 #include <asm/prom.h>
 #include <asm/rtas.h>
-#include <asm/abs_addr.h>
 #include <asm/page.h>
 #include <asm/processor.h>
 #include <asm/irq.h>
@@ -44,8 +41,6 @@
 #include <asm/pgtable.h>
 #include <asm/pci.h>
 #include <asm/iommu.h>
-#include <asm/bootinfo.h>
-#include <asm/ppcdebug.h>
 #include <asm/btext.h>
 #include <asm/sections.h>
 #include <asm/machdep.h>
@@ -80,24 +75,35 @@ extern const struct linux_logo logo_linux_clut224;
 /*
  * prom_init() is called very early on, before the kernel text
  * and data have been mapped to KERNELBASE.  At this point the code
- * is running at whatever address it has been loaded at, so
- * references to extern and static variables must be relocated
- * explicitly.  The procedure reloc_offset() returns the address
- * we're currently running at minus the address we were linked at.
- * (Note that strings count as static variables.)
+ * is running at whatever address it has been loaded at.
+ * On ppc32 we compile with -mrelocatable, which means that references
+ * to extern and static variables get relocated automatically.
+ * On ppc64 we have to relocate the references explicitly with
+ * RELOC.  (Note that strings count as static variables.)
  *
  * Because OF may have mapped I/O devices into the area starting at
  * KERNELBASE, particularly on CHRP machines, we can't safely call
  * OF once the kernel has been mapped to KERNELBASE.  Therefore all
- * OF calls should be done within prom_init(), and prom_init()
- * and all routines called within it must be careful to relocate
- * references as necessary.
+ * OF calls must be done within prom_init().
  *
- * Note that the bss is cleared *after* prom_init runs, so we have
- * to make sure that any static or extern variables it accesses
- * are put in the data segment.
+ * ADDR is used in calls to call_prom.  The 4th and following
+ * arguments to call_prom should be 32-bit values.
+ * On ppc64, 64 bit values are truncated to 32 bits (and
+ * fortunately don't get interpreted as two arguments).
  */
+#ifdef CONFIG_PPC64
+#define RELOC(x)        (*PTRRELOC(&(x)))
+#define ADDR(x)		(u32) add_reloc_offset((unsigned long)(x))
+#define OF_WORKAROUNDS	0
+#else
+#define RELOC(x)	(x)
+#define ADDR(x)		(u32) (x)
+#define OF_WORKAROUNDS	of_workarounds
+int of_workarounds;
+#endif
 
+#define OF_WA_CLAIM	1	/* do phys/virt claim separately, then map */
+#define OF_WA_LONGTRAIL	2	/* work around longtrail bugs */
 
 #define PROM_BUG() do {						\
         prom_printf("kernel BUG at %s line 0x%x!\n",		\
@@ -119,46 +125,43 @@ struct prom_args {
         u32 nargs;
         u32 nret;
         prom_arg_t args[10];
-        prom_arg_t *rets;     /* Pointer to return values in args[16]. */
 };
 
 struct prom_t {
-	unsigned long entry;
 	ihandle root;
-	ihandle chosen;
+	phandle chosen;
 	int cpu;
 	ihandle stdout;
-	ihandle disp_node;
-	struct prom_args args;
-	unsigned long version;
-	unsigned long root_size_cells;
-	unsigned long root_addr_cells;
-};
-
-struct pci_reg_property {
-	struct pci_address addr;
-	u32 size_hi;
-	u32 size_lo;
+	ihandle mmumap;
+	ihandle memory;
 };
 
 struct mem_map_entry {
-	u64	base;
-	u64	size;
+	unsigned long	base;
+	unsigned long	size;
 };
 
 typedef u32 cell_t;
 
 extern void __start(unsigned long r3, unsigned long r4, unsigned long r5);
 
-extern void enter_prom(struct prom_args *args, unsigned long entry);
+#ifdef CONFIG_PPC64
+extern int enter_prom(struct prom_args *args, unsigned long entry);
+#else
+static inline int enter_prom(struct prom_args *args, unsigned long entry)
+{
+	return ((int (*)(struct prom_args *))entry)(args);
+}
+#endif
+
 extern void copy_and_flush(unsigned long dest, unsigned long src,
 			   unsigned long size, unsigned long offset);
 
-extern unsigned long klimit;
-
 /* prom structure */
 static struct prom_t __initdata prom;
 
+static unsigned long prom_entry __initdata;
+
 #define PROM_SCRATCH_SIZE 256
 
 static char __initdata of_stdout_device[256];
@@ -170,15 +173,18 @@ static unsigned long __initdata dt_string_start, dt_string_end;
 
 static unsigned long __initdata prom_initrd_start, prom_initrd_end;
 
+#ifdef CONFIG_PPC64
 static int __initdata iommu_force_on;
 static int __initdata ppc64_iommu_off;
+static unsigned long __initdata prom_tce_alloc_start;
+static unsigned long __initdata prom_tce_alloc_end;
+#endif
+
 static int __initdata of_platform;
 
 static char __initdata prom_cmd_line[COMMAND_LINE_SIZE];
 
 static unsigned long __initdata prom_memory_limit;
-static unsigned long __initdata prom_tce_alloc_start;
-static unsigned long __initdata prom_tce_alloc_end;
 
 static unsigned long __initdata alloc_top;
 static unsigned long __initdata alloc_top_high;
@@ -203,14 +209,6 @@ struct {
 #endif /* CONFIG_HMT */
 
 /*
- * This are used in calls to call_prom.  The 4th and following
- * arguments to call_prom should be 32-bit values.  64 bit values
- * are truncated to 32 bits (and fortunately don't get interpreted
- * as two arguments).
- */
-#define ADDR(x)		(u32) ((unsigned long)(x) - offset)
-
-/*
  * Error results ... some OF calls will return "-1" on error, some
  * will return 0, some will return either. To simplify, here are
  * macros to use with any ihandle or phandle return value to check if
@@ -223,49 +221,67 @@ struct {
 
 
 /* This is the one and *ONLY* place where we actually call open
- * firmware from, since we need to make sure we're running in 32b
- * mode when we do.  We switch back to 64b mode upon return.
+ * firmware.
  */
 
 static int __init call_prom(const char *service, int nargs, int nret, ...)
 {
 	int i;
-	unsigned long offset = reloc_offset();
-	struct prom_t *_prom = PTRRELOC(&prom);
+	struct prom_args args;
 	va_list list;
 
-	_prom->args.service = ADDR(service);
-	_prom->args.nargs = nargs;
-	_prom->args.nret = nret;
-	_prom->args.rets = (prom_arg_t *)&(_prom->args.args[nargs]);
+	args.service = ADDR(service);
+	args.nargs = nargs;
+	args.nret = nret;
 
 	va_start(list, nret);
-	for (i=0; i < nargs; i++)
-		_prom->args.args[i] = va_arg(list, prom_arg_t);
+	for (i = 0; i < nargs; i++)
+		args.args[i] = va_arg(list, prom_arg_t);
 	va_end(list);
 
-	for (i=0; i < nret ;i++)
-		_prom->args.rets[i] = 0;
+	for (i = 0; i < nret; i++)
+		args.args[nargs+i] = 0;
 
-	enter_prom(&_prom->args, _prom->entry);
+	if (enter_prom(&args, RELOC(prom_entry)) < 0)
+		return PROM_ERROR;
 
-	return (nret > 0) ? _prom->args.rets[0] : 0;
+	return (nret > 0) ? args.args[nargs] : 0;
 }
 
-
-static unsigned int __init prom_claim(unsigned long virt, unsigned long size,
-				unsigned long align)
+static int __init call_prom_ret(const char *service, int nargs, int nret,
+				prom_arg_t *rets, ...)
 {
-	return (unsigned int)call_prom("claim", 3, 1,
-				       (prom_arg_t)virt, (prom_arg_t)size,
-				       (prom_arg_t)align);
+	int i;
+	struct prom_args args;
+	va_list list;
+
+	args.service = ADDR(service);
+	args.nargs = nargs;
+	args.nret = nret;
+
+	va_start(list, rets);
+	for (i = 0; i < nargs; i++)
+		args.args[i] = va_arg(list, prom_arg_t);
+	va_end(list);
+
+	for (i = 0; i < nret; i++)
+		args.args[nargs+i] = 0;
+
+	if (enter_prom(&args, RELOC(prom_entry)) < 0)
+		return PROM_ERROR;
+
+	if (rets != NULL)
+		for (i = 1; i < nret; ++i)
+			rets[i-1] = args.args[nargs+i];
+
+	return (nret > 0) ? args.args[nargs] : 0;
 }
 
+
 static void __init prom_print(const char *msg)
 {
 	const char *p, *q;
-	unsigned long offset = reloc_offset();
-	struct prom_t *_prom = PTRRELOC(&prom);
+	struct prom_t *_prom = &RELOC(prom);
 
 	if (_prom->stdout == 0)
 		return;
@@ -285,10 +301,9 @@ static void __init prom_print(const char *msg)
 
 static void __init prom_print_hex(unsigned long val)
 {
-	unsigned long offset = reloc_offset();
 	int i, nibbles = sizeof(val)*2;
 	char buf[sizeof(val)*2+1];
-	struct prom_t *_prom = PTRRELOC(&prom);
+	struct prom_t *_prom = &RELOC(prom);
 
 	for (i = nibbles-1;  i >= 0;  i--) {
 		buf[i] = (val & 0xf) + '0';
@@ -303,14 +318,16 @@ static void __init prom_print_hex(unsigned long val)
 
 static void __init prom_printf(const char *format, ...)
 {
-	unsigned long offset = reloc_offset();
 	const char *p, *q, *s;
 	va_list args;
 	unsigned long v;
-	struct prom_t *_prom = PTRRELOC(&prom);
+	struct prom_t *_prom = &RELOC(prom);
 
 	va_start(args, format);
-	for (p = PTRRELOC(format); *p != 0; p = q) {
+#ifdef CONFIG_PPC64
+	format = PTRRELOC(format);
+#endif
+	for (p = format; *p != 0; p = q) {
 		for (q = p; *q != 0 && *q != '\n' && *q != '%'; ++q)
 			;
 		if (q > p)
@@ -342,12 +359,48 @@ static void __init prom_printf(const char *format, ...)
 }
 
 
-static void __init __attribute__((noreturn)) prom_panic(const char *reason)
+static unsigned int __init prom_claim(unsigned long virt, unsigned long size,
+				unsigned long align)
 {
-	unsigned long offset = reloc_offset();
+	struct prom_t *_prom = &RELOC(prom);
+
+	if (align == 0 && (OF_WORKAROUNDS & OF_WA_CLAIM)) {
+		/*
+		 * Old OF requires we claim physical and virtual separately
+		 * and then map explicitly (assuming virtual mode)
+		 */
+		int ret;
+		prom_arg_t result;
+
+		ret = call_prom_ret("call-method", 5, 2, &result,
+				    ADDR("claim"), _prom->memory,
+				    align, size, virt);
+		if (ret != 0 || result == -1)
+			return -1;
+		ret = call_prom_ret("call-method", 5, 2, &result,
+				    ADDR("claim"), _prom->mmumap,
+				    align, size, virt);
+		if (ret != 0) {
+			call_prom("call-method", 4, 1, ADDR("release"),
+				  _prom->memory, size, virt);
+			return -1;
+		}
+		/* the 0x12 is M (coherence) + PP == read/write */
+		call_prom("call-method", 6, 1,
+			  ADDR("map"), _prom->mmumap, 0x12, size, virt, virt);
+		return virt;
+	}
+	return call_prom("claim", 3, 1, (prom_arg_t)virt, (prom_arg_t)size,
+			 (prom_arg_t)align);
+}
 
-	prom_print(PTRRELOC(reason));
-	/* ToDo: should put up an SRC here */
+static void __init __attribute__((noreturn)) prom_panic(const char *reason)
+{
+#ifdef CONFIG_PPC64
+	reason = PTRRELOC(reason);
+#endif
+	prom_print(reason);
+	/* ToDo: should put up an SRC here on p/iSeries */
 	call_prom("exit", 0, 0);
 
 	for (;;)			/* should never get here */
@@ -372,29 +425,64 @@ static int __init prom_next_node(phandle *nodep)
 	}
 }
 
-static int __init prom_getprop(phandle node, const char *pname,
+static int inline prom_getprop(phandle node, const char *pname,
 			       void *value, size_t valuelen)
 {
-	unsigned long offset = reloc_offset();
-
 	return call_prom("getprop", 4, 1, node, ADDR(pname),
 			 (u32)(unsigned long) value, (u32) valuelen);
 }
 
-static int __init prom_getproplen(phandle node, const char *pname)
+static int inline prom_getproplen(phandle node, const char *pname)
 {
-	unsigned long offset = reloc_offset();
-
 	return call_prom("getproplen", 2, 1, node, ADDR(pname));
 }
 
-static int __init prom_setprop(phandle node, const char *pname,
-			       void *value, size_t valuelen)
+static void add_string(char **str, const char *q)
 {
-	unsigned long offset = reloc_offset();
+	char *p = *str;
 
-	return call_prom("setprop", 4, 1, node, ADDR(pname),
-			 (u32)(unsigned long) value, (u32) valuelen);
+	while (*q)
+		*p++ = *q++;
+	*p++ = ' ';
+	*str = p;
+}
+
+static char *tohex(unsigned int x)
+{
+	static char digits[] = "0123456789abcdef";
+	static char result[9];
+	int i;
+
+	result[8] = 0;
+	i = 8;
+	do {
+		--i;
+		result[i] = digits[x & 0xf];
+		x >>= 4;
+	} while (x != 0 && i > 0);
+	return &result[i];
+}
+
+static int __init prom_setprop(phandle node, const char *nodename,
+			       const char *pname, void *value, size_t valuelen)
+{
+	char cmd[256], *p;
+
+	if (!(OF_WORKAROUNDS & OF_WA_LONGTRAIL))
+		return call_prom("setprop", 4, 1, node, ADDR(pname),
+				 (u32)(unsigned long) value, (u32) valuelen);
+
+	/* gah... setprop doesn't work on longtrail, have to use interpret */
+	p = cmd;
+	add_string(&p, "dev");
+	add_string(&p, nodename);
+	add_string(&p, tohex((u32)(unsigned long) value));
+	add_string(&p, tohex(valuelen));
+	add_string(&p, tohex(ADDR(pname)));
+	add_string(&p, tohex(strlen(RELOC(pname))));
+	add_string(&p, "property");
+	*p = 0;
+	return call_prom("interpret", 1, 1, (u32)(unsigned long) cmd);
 }
 
 /* We can't use the standard versions because of RELOC headaches. */
@@ -464,8 +552,7 @@ unsigned long prom_memparse(const char *ptr, const char **retptr)
  */
 static void __init early_cmdline_parse(void)
 {
-	unsigned long offset = reloc_offset();
-	struct prom_t *_prom = PTRRELOC(&prom);
+	struct prom_t *_prom = &RELOC(prom);
 	char *opt, *p;
 	int l = 0;
 
@@ -480,6 +567,7 @@ static void __init early_cmdline_parse(void)
 #endif /* CONFIG_CMDLINE */
 	prom_printf("command line: %s\n", RELOC(prom_cmd_line));
 
+#ifdef CONFIG_PPC64
 	opt = strstr(RELOC(prom_cmd_line), RELOC("iommu="));
 	if (opt) {
 		prom_printf("iommu opt is: %s\n", opt);
@@ -491,16 +579,20 @@ static void __init early_cmdline_parse(void)
 		else if (!strncmp(opt, RELOC("force"), 5))
 			RELOC(iommu_force_on) = 1;
 	}
+#endif
 
 	opt = strstr(RELOC(prom_cmd_line), RELOC("mem="));
 	if (opt) {
 		opt += 4;
 		RELOC(prom_memory_limit) = prom_memparse(opt, (const char **)&opt);
-		/* Align to 16 MB == size of large page */
+#ifdef CONFIG_PPC64
+		/* Align to 16 MB == size of ppc64 large page */
 		RELOC(prom_memory_limit) = ALIGN(RELOC(prom_memory_limit), 0x1000000);
+#endif
 	}
 }
 
+#ifdef CONFIG_PPC_PSERIES
 /*
  * To tell the firmware what our capabilities are, we have to pass
  * it a fake 32-bit ELF header containing a couple of PT_NOTE sections
@@ -594,7 +686,6 @@ static struct fake_elf {
 
 static void __init prom_send_capabilities(void)
 {
-	unsigned long offset = reloc_offset();
 	ihandle elfloader;
 
 	elfloader = call_prom("open", 1, 1, ADDR("/packages/elf-loader"));
@@ -606,25 +697,31 @@ static void __init prom_send_capabilities(void)
 			elfloader, ADDR(&fake_elf));
 	call_prom("close", 1, 0, elfloader);
 }
+#endif
 
 /*
  * Memory allocation strategy... our layout is normally:
  *
- *  at 14Mb or more we vmlinux, then a gap and initrd. In some rare cases, initrd
- *  might end up beeing before the kernel though. We assume this won't override
- *  the final kernel at 0, we have no provision to handle that in this version,
- *  but it should hopefully never happen.
+ *  at 14Mb or more we have vmlinux, then a gap and initrd.  In some
+ *  rare cases, initrd might end up being before the kernel though.
+ *  We assume this won't override the final kernel at 0, we have no
+ *  provision to handle that in this version, but it should hopefully
+ *  never happen.
+ *
+ *  alloc_top is set to the top of RMO, eventually shrink down if the
+ *  TCEs overlap
  *
- *  alloc_top is set to the top of RMO, eventually shrink down if the TCEs overlap
  *  alloc_bottom is set to the top of kernel/initrd
  *
- *  from there, allocations are done that way : rtas is allocated topmost, and
- *  the device-tree is allocated from the bottom. We try to grow the device-tree
- *  allocation as we progress. If we can't, then we fail, we don't currently have
- *  a facility to restart elsewhere, but that shouldn't be necessary neither
+ *  from there, allocations are done this way : rtas is allocated
+ *  topmost, and the device-tree is allocated from the bottom. We try
+ *  to grow the device-tree allocation as we progress. If we can't,
+ *  then we fail, we don't currently have a facility to restart
+ *  elsewhere, but that shouldn't be necessary.
  *
- *  Note that calls to reserve_mem have to be done explicitely, memory allocated
- *  with either alloc_up or alloc_down isn't automatically reserved.
+ *  Note that calls to reserve_mem have to be done explicitly, memory
+ *  allocated with either alloc_up or alloc_down isn't automatically
+ *  reserved.
  */
 
 
@@ -637,10 +734,11 @@ static void __init prom_send_capabilities(void)
  */
 static unsigned long __init alloc_up(unsigned long size, unsigned long align)
 {
-	unsigned long offset = reloc_offset();
-	unsigned long base = _ALIGN_UP(RELOC(alloc_bottom), align);
+	unsigned long base = RELOC(alloc_bottom);
 	unsigned long addr = 0;
 
+	if (align)
+		base = _ALIGN_UP(base, align);
 	prom_debug("alloc_up(%x, %x)\n", size, align);
 	if (RELOC(ram_top) == 0)
 		prom_panic("alloc_up() called with mem not initialized\n");
@@ -654,7 +752,7 @@ static unsigned long __init alloc_up(unsigned long size, unsigned long align)
 	    base = _ALIGN_UP(base + 0x100000, align)) {
 		prom_debug("    trying: 0x%x\n\r", base);
 		addr = (unsigned long)prom_claim(base, size, 0);
-		if (addr != PROM_ERROR)
+		if (addr != PROM_ERROR && addr != 0)
 			break;
 		addr = 0;
 		if (align == 0)
@@ -675,14 +773,13 @@ static unsigned long __init alloc_up(unsigned long size, unsigned long align)
 }
 
 /*
- * Allocates memory downard, either from top of RMO, or if highmem
- * is set, from the top of RAM. Note that this one doesn't handle
- * failures. In does claim memory if highmem is not set.
+ * Allocates memory downward, either from top of RMO, or if highmem
+ * is set, from the top of RAM.  Note that this one doesn't handle
+ * failures.  It does claim memory if highmem is not set.
  */
 static unsigned long __init alloc_down(unsigned long size, unsigned long align,
 				       int highmem)
 {
-	unsigned long offset = reloc_offset();
 	unsigned long base, addr = 0;
 
 	prom_debug("alloc_down(%x, %x, %s)\n", size, align,
@@ -695,28 +792,27 @@ static unsigned long __init alloc_down(unsigned long size, unsigned long align,
 		addr = _ALIGN_DOWN(RELOC(alloc_top_high) - size, align);
 		if (addr <= RELOC(alloc_bottom))
 			return 0;
-		else {
-			/* Will we bump into the RMO ? If yes, check out that we
-			 * didn't overlap existing allocations there, if we did,
-			 * we are dead, we must be the first in town !
-			 */
-			if (addr < RELOC(rmo_top)) {
-				/* Good, we are first */
-				if (RELOC(alloc_top) == RELOC(rmo_top))
-					RELOC(alloc_top) = RELOC(rmo_top) = addr;
-				else
-					return 0;
-			}
-			RELOC(alloc_top_high) = addr;
+		/* Will we bump into the RMO ? If yes, check out that we
+		 * didn't overlap existing allocations there, if we did,
+		 * we are dead, we must be the first in town !
+		 */
+		if (addr < RELOC(rmo_top)) {
+			/* Good, we are first */
+			if (RELOC(alloc_top) == RELOC(rmo_top))
+				RELOC(alloc_top) = RELOC(rmo_top) = addr;
+			else
+				return 0;
 		}
+		RELOC(alloc_top_high) = addr;
 		goto bail;
 	}
 
 	base = _ALIGN_DOWN(RELOC(alloc_top) - size, align);
-	for(; base > RELOC(alloc_bottom); base = _ALIGN_DOWN(base - 0x100000, align))  {
+	for (; base > RELOC(alloc_bottom);
+	     base = _ALIGN_DOWN(base - 0x100000, align))  {
 		prom_debug("    trying: 0x%x\n\r", base);
 		addr = (unsigned long)prom_claim(base, size, 0);
-		if (addr != PROM_ERROR)
+		if (addr != PROM_ERROR && addr != 0)
 			break;
 		addr = 0;
 	}
@@ -744,16 +840,17 @@ static unsigned long __init prom_next_cell(int s, cell_t **cellp)
 	unsigned long r = 0;
 
 	/* Ignore more than 2 cells */
-	while (s > 2) {
+	while (s > sizeof(unsigned long) / 4) {
 		p++;
 		s--;
 	}
-	while (s) {
+	r = *p++;
+#ifdef CONFIG_PPC64
+	if (s > 1) {
 		r <<= 32;
 		r |= *(p++);
-		s--;
 	}
-
+#endif
 	*cellp = p;
 	return r;
 }
@@ -762,13 +859,12 @@ static unsigned long __init prom_next_cell(int s, cell_t **cellp)
  * Very dumb function for adding to the memory reserve list, but
  * we don't need anything smarter at this point
  *
- * XXX Eventually check for collisions. They should NEVER happen
- * if problems seem to show up, it would be a good start to track
+ * XXX Eventually check for collisions.  They should NEVER happen.
+ * If problems seem to show up, it would be a good start to track
  * them down.
  */
 static void reserve_mem(unsigned long base, unsigned long size)
 {
-	unsigned long offset = reloc_offset();
 	unsigned long top = base + size;
 	unsigned long cnt = RELOC(mem_reserve_cnt);
 
@@ -800,16 +896,20 @@ static void __init prom_init_mem(void)
 	char *path, type[64];
 	unsigned int plen;
 	cell_t *p, *endp;
-	unsigned long offset = reloc_offset();
-	struct prom_t *_prom = PTRRELOC(&prom);
+	struct prom_t *_prom = &RELOC(prom);
+	u32 rac, rsc;
 
 	/*
 	 * We iterate the memory nodes to find
 	 * 1) top of RMO (first node)
 	 * 2) top of memory
 	 */
-	prom_debug("root_addr_cells: %x\n", (long)_prom->root_addr_cells);
-	prom_debug("root_size_cells: %x\n", (long)_prom->root_size_cells);
+	rac = 2;
+	prom_getprop(_prom->root, "#address-cells", &rac, sizeof(rac));
+	rsc = 1;
+	prom_getprop(_prom->root, "#size-cells", &rsc, sizeof(rsc));
+	prom_debug("root_addr_cells: %x\n", (unsigned long) rac);
+	prom_debug("root_size_cells: %x\n", (unsigned long) rsc);
 
 	prom_debug("scanning memory:\n");
 	path = RELOC(prom_scratch);
@@ -818,9 +918,16 @@ static void __init prom_init_mem(void)
 		type[0] = 0;
 		prom_getprop(node, "device_type", type, sizeof(type));
 
+		if (type[0] == 0) {
+			/*
+			 * CHRP Longtrail machines have no device_type
+			 * on the memory node, so check the name instead...
+			 */
+			prom_getprop(node, "name", type, sizeof(type));
+		}
 		if (strcmp(type, RELOC("memory")))
 			continue;
-	
+
 		plen = prom_getprop(node, "reg", RELOC(regbuf), sizeof(regbuf));
 		if (plen > sizeof(regbuf)) {
 			prom_printf("memory node too large for buffer !\n");
@@ -835,11 +942,11 @@ static void __init prom_init_mem(void)
 		prom_debug("  node %s :\n", path);
 #endif /* DEBUG_PROM */
 
-		while ((endp - p) >= (_prom->root_addr_cells + _prom->root_size_cells)) {
+		while ((endp - p) >= (rac + rsc)) {
 			unsigned long base, size;
 
-			base = prom_next_cell(_prom->root_addr_cells, &p);
-			size = prom_next_cell(_prom->root_size_cells, &p);
+			base = prom_next_cell(rac, &p);
+			size = prom_next_cell(rsc, &p);
 
 			if (size == 0)
 				continue;
@@ -851,7 +958,7 @@ static void __init prom_init_mem(void)
 		}
 	}
 
-	RELOC(alloc_bottom) = PAGE_ALIGN(RELOC(klimit) - offset + 0x4000);
+	RELOC(alloc_bottom) = PAGE_ALIGN((unsigned long)&RELOC(_end) + 0x4000);
 
 	/* Check if we have an initrd after the kernel, if we do move our bottom
 	 * point to after it
@@ -887,14 +994,15 @@ static void __init prom_init_mem(void)
 	/*
 	 * Setup our top alloc point, that is top of RMO or top of
 	 * segment 0 when running non-LPAR.
+	 * Some RS64 machines have buggy firmware where claims up at
+	 * 1GB fail.  Cap at 768MB as a workaround.
+	 * Since 768MB is plenty of room, and we need to cap to something
+	 * reasonable on 32-bit, cap at 768MB on all machines.
 	 */
-	if ( RELOC(of_platform) == PLATFORM_PSERIES_LPAR )
-		RELOC(alloc_top) = RELOC(rmo_top);
-	else
-		/* Some RS64 machines have buggy firmware where claims up at 1GB
-		 * fails. Cap at 768MB as a workaround. Still plenty of room.
-		 */
-		RELOC(alloc_top) = RELOC(rmo_top) = min(0x30000000ul, RELOC(ram_top));
+	if (!RELOC(rmo_top))
+		RELOC(rmo_top) = RELOC(ram_top);
+	RELOC(rmo_top) = min(0x30000000ul, RELOC(rmo_top));
+	RELOC(alloc_top) = RELOC(rmo_top);
 
 	prom_printf("memory layout at init:\n");
 	prom_printf("  memory_limit : %x (16 MB aligned)\n", RELOC(prom_memory_limit));
@@ -907,12 +1015,10 @@ static void __init prom_init_mem(void)
 
 
 /*
- * Allocate room for and instanciate RTAS
+ * Allocate room for and instantiate RTAS
  */
 static void __init prom_instantiate_rtas(void)
 {
-	unsigned long offset = reloc_offset();
-	struct prom_t *_prom = PTRRELOC(&prom);
 	phandle rtas_node;
 	ihandle rtas_inst;
 	u32 base, entry = 0;
@@ -937,18 +1043,16 @@ static void __init prom_instantiate_rtas(void)
 
 	rtas_inst = call_prom("open", 1, 1, ADDR("/rtas"));
 	if (!IHANDLE_VALID(rtas_inst)) {
-		prom_printf("opening rtas package failed");
+		prom_printf("opening rtas package failed (%x)\n", rtas_inst);
 		return;
 	}
 
 	prom_printf("instantiating rtas at 0x%x ...", base);
 
-	if (call_prom("call-method", 3, 2,
-		      ADDR("instantiate-rtas"),
-		      rtas_inst, base) != PROM_ERROR) {
-		entry = (long)_prom->args.rets[1];
-	}
-	if (entry == 0) {
+	if (call_prom_ret("call-method", 3, 2, &entry,
+			  ADDR("instantiate-rtas"),
+			  rtas_inst, base) != 0
+	    || entry == 0) {
 		prom_printf(" failed\n");
 		return;
 	}
@@ -956,8 +1060,10 @@ static void __init prom_instantiate_rtas(void)
 
 	reserve_mem(base, size);
 
-	prom_setprop(rtas_node, "linux,rtas-base", &base, sizeof(base));
-	prom_setprop(rtas_node, "linux,rtas-entry", &entry, sizeof(entry));
+	prom_setprop(rtas_node, "/rtas", "linux,rtas-base",
+		     &base, sizeof(base));
+	prom_setprop(rtas_node, "/rtas", "linux,rtas-entry",
+		     &entry, sizeof(entry));
 
 	prom_debug("rtas base     = 0x%x\n", base);
 	prom_debug("rtas entry    = 0x%x\n", entry);
@@ -966,7 +1072,7 @@ static void __init prom_instantiate_rtas(void)
 	prom_debug("prom_instantiate_rtas: end...\n");
 }
 
-
+#ifdef CONFIG_PPC64
 /*
  * Allocate room for and initialize TCE tables
  */
@@ -974,7 +1080,6 @@ static void __init prom_initialize_tce_table(void)
 {
 	phandle node;
 	ihandle phb_node;
-	unsigned long offset = reloc_offset();
 	char compatible[64], type[64], model[64];
 	char *path = RELOC(prom_scratch);
 	u64 base, align;
@@ -1049,10 +1154,6 @@ static void __init prom_initialize_tce_table(void)
 		if (base < local_alloc_bottom)
 			local_alloc_bottom = base;
 
-		/* Save away the TCE table attributes for later use. */
-		prom_setprop(node, "linux,tce-base", &base, sizeof(base));
-		prom_setprop(node, "linux,tce-size", &minsize, sizeof(minsize));
-
 		/* It seems OF doesn't null-terminate the path :-( */
 		memset(path, 0, sizeof(path));
 		/* Call OF to setup the TCE hardware */
@@ -1061,6 +1162,10 @@ static void __init prom_initialize_tce_table(void)
 			prom_printf("package-to-path failed\n");
 		}
 
+		/* Save away the TCE table attributes for later use. */
+		prom_setprop(node, path, "linux,tce-base", &base, sizeof(base));
+		prom_setprop(node, path, "linux,tce-size", &minsize, sizeof(minsize));
+
 		prom_debug("TCE table: %s\n", path);
 		prom_debug("\tnode = 0x%x\n", node);
 		prom_debug("\tbase = 0x%x\n", base);
@@ -1093,24 +1198,25 @@ static void __init prom_initialize_tce_table(void)
 
 	if (RELOC(prom_memory_limit)) {
 		/*
-		 * We align the start to a 16MB boundary so we can map the TCE area
-		 * using large pages if possible. The end should be the top of RAM
-		 * so no need to align it.
+		 * We align the start to a 16MB boundary so we can map
+		 * the TCE area using large pages if possible.
+		 * The end should be the top of RAM so no need to align it.
 		 */
-		RELOC(prom_tce_alloc_start) = _ALIGN_DOWN(local_alloc_bottom, 0x1000000);
+		RELOC(prom_tce_alloc_start) = _ALIGN_DOWN(local_alloc_bottom,
+							  0x1000000);
 		RELOC(prom_tce_alloc_end) = local_alloc_top;
 	}
 
 	/* Flag the first invalid entry */
 	prom_debug("ending prom_initialize_tce_table\n");
 }
+#endif
 
 /*
- * With CHRP SMP we need to use the OF to start the other
- * processors so we can't wait until smp_boot_cpus (the OF is
- * trashed by then) so we have to put the processors into
- * a holding pattern controlled by the kernel (not OF) before
- * we destroy the OF.
+ * With CHRP SMP we need to use the OF to start the other processors.
+ * We can't wait until smp_boot_cpus (the OF is trashed by then)
+ * so we have to put the processors into a holding pattern controlled
+ * by the kernel (not OF) before we destroy the OF.
  *
  * This uses a chunk of low memory, puts some holding pattern
  * code there and sends the other processors off to there until
@@ -1122,31 +1228,40 @@ static void __init prom_initialize_tce_table(void)
  * We also use physical address 0x4 here to tell when a cpu
  * is in its holding pattern code.
  *
- * Fixup comment... DRENG / PPPBBB - Peter
- *
  * -- Cort
  */
+extern void __secondary_hold(void);
+extern unsigned long __secondary_hold_spinloop;
+extern unsigned long __secondary_hold_acknowledge;
+
+/*
+ * We want to reference the copy of __secondary_hold_* in the
+ * 0 - 0x100 address range
+ */
+#define LOW_ADDR(x)	(((unsigned long) &(x)) & 0xff)
+
 static void __init prom_hold_cpus(void)
 {
 	unsigned long i;
 	unsigned int reg;
 	phandle node;
-	unsigned long offset = reloc_offset();
 	char type[64];
 	int cpuid = 0;
 	unsigned int interrupt_server[MAX_CPU_THREADS];
 	unsigned int cpu_threads, hw_cpu_num;
 	int propsize;
-	extern void __secondary_hold(void);
-	extern unsigned long __secondary_hold_spinloop;
-	extern unsigned long __secondary_hold_acknowledge;
+	struct prom_t *_prom = &RELOC(prom);
 	unsigned long *spinloop
-		= (void *)virt_to_abs(&__secondary_hold_spinloop);
+		= (void *) LOW_ADDR(__secondary_hold_spinloop);
 	unsigned long *acknowledge
-		= (void *)virt_to_abs(&__secondary_hold_acknowledge);
+		= (void *) LOW_ADDR(__secondary_hold_acknowledge);
+#ifdef CONFIG_PPC64
+	/* __secondary_hold is actually a descriptor, not the text address */
 	unsigned long secondary_hold
-		= virt_to_abs(*PTRRELOC((unsigned long *)__secondary_hold));
-	struct prom_t *_prom = PTRRELOC(&prom);
+		= __pa(*PTRRELOC((unsigned long *)__secondary_hold));
+#else
+	unsigned long secondary_hold = LOW_ADDR(__secondary_hold);
+#endif
 
 	prom_debug("prom_hold_cpus: start...\n");
 	prom_debug("    1) spinloop       = 0x%x\n", (unsigned long)spinloop);
@@ -1164,9 +1279,8 @@ static void __init prom_hold_cpus(void)
 	*spinloop = 0;
 
 #ifdef CONFIG_HMT
-	for (i=0; i < NR_CPUS; i++) {
+	for (i = 0; i < NR_CPUS; i++)
 		RELOC(hmt_thread_data)[i].pir = 0xdeadbeef;
-	}
 #endif
 	/* look for cpus */
 	for (node = 0; prom_next_node(&node); ) {
@@ -1217,34 +1331,22 @@ static void __init prom_hold_cpus(void)
 			call_prom("start-cpu", 3, 0, node,
 				  secondary_hold, reg);
 
-			for ( i = 0 ; (i < 100000000) && 
-			      (*acknowledge == ((unsigned long)-1)); i++ )
+			for (i = 0; (i < 100000000) && 
+			     (*acknowledge == ((unsigned long)-1)); i++ )
 				mb();
 
-			if (*acknowledge == reg) {
+			if (*acknowledge == reg)
 				prom_printf("done\n");
-				/* We have to get every CPU out of OF,
-				 * even if we never start it. */
-				if (cpuid >= NR_CPUS)
-					goto next;
-			} else {
+			else
 				prom_printf("failed: %x\n", *acknowledge);
-			}
 		}
 #ifdef CONFIG_SMP
 		else
 			prom_printf("%x : boot cpu     %x\n", cpuid, reg);
-#endif
-next:
-#ifdef CONFIG_SMP
-		/* Init paca for secondary threads.   They start later. */
-		for (i=1; i < cpu_threads; i++) {
-			cpuid++;
-			if (cpuid >= NR_CPUS)
-				continue;
-		}
 #endif /* CONFIG_SMP */
-		cpuid++;
+
+		/* Reserve cpu #s for secondary threads.   They start later. */
+		cpuid += cpu_threads;
 	}
 #ifdef CONFIG_HMT
 	/* Only enable HMT on processors that provide support. */
@@ -1283,15 +1385,10 @@ next:
 
 static void __init prom_init_client_services(unsigned long pp)
 {
-	unsigned long offset = reloc_offset();
-	struct prom_t *_prom = PTRRELOC(&prom);
+	struct prom_t *_prom = &RELOC(prom);
 
 	/* Get a handle to the prom entry point before anything else */
-	_prom->entry = pp;
-
-	/* Init default value for phys size */
-	_prom->root_size_cells = 1;
-	_prom->root_addr_cells = 2;
+	RELOC(prom_entry) = pp;
 
 	/* get a handle for the stdout device */
 	_prom->chosen = call_prom("finddevice", 1, 1, ADDR("/chosen"));
@@ -1302,12 +1399,49 @@ static void __init prom_init_client_services(unsigned long pp)
 	_prom->root = call_prom("finddevice", 1, 1, ADDR("/"));
 	if (!PHANDLE_VALID(_prom->root))
 		prom_panic("cannot find device tree root"); /* msg won't be printed :( */
+
+	_prom->mmumap = 0;
 }
 
+#ifdef CONFIG_PPC32
+/*
+ * For really old powermacs, we need to map things we claim.
+ * For that, we need the ihandle of the mmu.
+ * Also, on the longtrail, we need to work around other bugs.
+ */
+static void __init prom_find_mmu(void)
+{
+	struct prom_t *_prom = &RELOC(prom);
+	phandle oprom;
+	char version[64];
+
+	oprom = call_prom("finddevice", 1, 1, ADDR("/openprom"));
+	if (!PHANDLE_VALID(oprom))
+		return;
+	if (prom_getprop(oprom, "model", version, sizeof(version)) <= 0)
+		return;
+	version[sizeof(version) - 1] = 0;
+	/* XXX might need to add other versions here */
+	if (strcmp(version, "Open Firmware, 1.0.5") == 0)
+		of_workarounds = OF_WA_CLAIM;
+	else if (strncmp(version, "FirmWorks,3.", 12) == 0) {
+		of_workarounds = OF_WA_CLAIM | OF_WA_LONGTRAIL;
+		call_prom("interpret", 1, 1, "dev /memory 0 to allow-reclaim");
+	} else
+		return;
+	_prom->memory = call_prom("open", 1, 1, ADDR("/memory"));
+	prom_getprop(_prom->chosen, "mmu", &_prom->mmumap,
+		     sizeof(_prom->mmumap));
+	if (!IHANDLE_VALID(_prom->memory) || !IHANDLE_VALID(_prom->mmumap))
+		of_workarounds &= ~OF_WA_CLAIM;		/* hmmm */
+}
+#else
+#define prom_find_mmu()
+#endif
+
 static void __init prom_init_stdout(void)
 {
-	unsigned long offset = reloc_offset();
-	struct prom_t *_prom = PTRRELOC(&prom);
+	struct prom_t *_prom = &RELOC(prom);
 	char *path = RELOC(of_stdout_device);
 	char type[16];
 	u32 val;
@@ -1321,24 +1455,22 @@ static void __init prom_init_stdout(void)
 	memset(path, 0, 256);
 	call_prom("instance-to-path", 3, 1, _prom->stdout, path, 255);
 	val = call_prom("instance-to-package", 1, 1, _prom->stdout);
-	prom_setprop(_prom->chosen, "linux,stdout-package", &val, sizeof(val));
+	prom_setprop(_prom->chosen, "/chosen", "linux,stdout-package",
+		     &val, sizeof(val));
 	prom_printf("OF stdout device is: %s\n", RELOC(of_stdout_device));
-	prom_setprop(_prom->chosen, "linux,stdout-path",
-		     RELOC(of_stdout_device), strlen(RELOC(of_stdout_device))+1);
+	prom_setprop(_prom->chosen, "/chosen", "linux,stdout-path",
+		     path, strlen(path) + 1);
 
 	/* If it's a display, note it */
 	memset(type, 0, sizeof(type));
 	prom_getprop(val, "device_type", type, sizeof(type));
-	if (strcmp(type, RELOC("display")) == 0) {
-		_prom->disp_node = val;
-		prom_setprop(val, "linux,boot-display", NULL, 0);
-	}
+	if (strcmp(type, RELOC("display")) == 0)
+		prom_setprop(val, path, "linux,boot-display", NULL, 0);
 }
 
 static void __init prom_close_stdin(void)
 {
-	unsigned long offset = reloc_offset();
-	struct prom_t *_prom = PTRRELOC(&prom);
+	struct prom_t *_prom = &RELOC(prom);
 	ihandle val;
 
 	if (prom_getprop(_prom->chosen, "stdin", &val, sizeof(val)) > 0)
@@ -1347,12 +1479,12 @@ static void __init prom_close_stdin(void)
 
 static int __init prom_find_machine_type(void)
 {
-	unsigned long offset = reloc_offset();
-	struct prom_t *_prom = PTRRELOC(&prom);
+	struct prom_t *_prom = &RELOC(prom);
 	char compat[256];
 	int len, i = 0;
+#ifdef CONFIG_PPC64
 	phandle rtas;
-
+#endif
 	len = prom_getprop(_prom->root, "compatible",
 			   compat, sizeof(compat)-1);
 	if (len > 0) {
@@ -1363,13 +1495,16 @@ static int __init prom_find_machine_type(void)
 			if (sl == 0)
 				break;
 			if (strstr(p, RELOC("Power Macintosh")) ||
-			    strstr(p, RELOC("MacRISC4")))
+			    strstr(p, RELOC("MacRISC")))
 				return PLATFORM_POWERMAC;
+#ifdef CONFIG_PPC64
 			if (strstr(p, RELOC("Momentum,Maple")))
 				return PLATFORM_MAPLE;
+#endif
 			i += sl + 1;
 		}
 	}
+#ifdef CONFIG_PPC64
 	/* Default to pSeries. We need to know if we are running LPAR */
 	rtas = call_prom("finddevice", 1, 1, ADDR("/rtas"));
 	if (PHANDLE_VALID(rtas)) {
@@ -1380,12 +1515,13 @@ static int __init prom_find_machine_type(void)
 		}
 	}
 	return PLATFORM_PSERIES;
+#else
+	return PLATFORM_CHRP;
+#endif
 }
 
 static int __init prom_set_color(ihandle ih, int i, int r, int g, int b)
 {
-	unsigned long offset = reloc_offset();
-
 	return call_prom("call-method", 6, 1, ADDR("color!"), ih, i, b, g, r);
 }
 
@@ -1399,8 +1535,6 @@ static int __init prom_set_color(ihandle ih, int i, int r, int g, int b)
  */
 static void __init prom_check_displays(void)
 {
-	unsigned long offset = reloc_offset();
-	struct prom_t *_prom = PTRRELOC(&prom);
 	char type[16], *path;
 	phandle node;
 	ihandle ih;
@@ -1454,16 +1588,9 @@ static void __init prom_check_displays(void)
 
 		/* Success */
 		prom_printf("done\n");
-		prom_setprop(node, "linux,opened", NULL, 0);
-
-		/*
-		 * stdout wasn't a display node, pick the first we can find
-		 * for btext
-		 */
-		if (_prom->disp_node == 0)
-			_prom->disp_node = node;
+		prom_setprop(node, path, "linux,opened", NULL, 0);
 
-		/* Setup a useable color table when the appropriate
+		/* Setup a usable color table when the appropriate
 		 * method is available. Should update this to set-colors */
 		clut = RELOC(default_colors);
 		for (i = 0; i < 32; i++, clut += 3)
@@ -1486,7 +1613,6 @@ static void __init prom_check_displays(void)
 static void __init *make_room(unsigned long *mem_start, unsigned long *mem_end,
 			      unsigned long needed, unsigned long align)
 {
-	unsigned long offset = reloc_offset();
 	void *ret;
 
 	*mem_start = _ALIGN(*mem_start, align);
@@ -1517,7 +1643,6 @@ static void __init *make_room(unsigned long *mem_start, unsigned long *mem_end,
 
 static unsigned long __init dt_find_string(char *str)
 {
-	unsigned long offset = reloc_offset();
 	char *s, *os;
 
 	s = os = (char *)RELOC(dt_string_start);
@@ -1540,7 +1665,6 @@ static void __init scan_dt_build_strings(phandle node,
 					 unsigned long *mem_start,
 					 unsigned long *mem_end)
 {
-	unsigned long offset = reloc_offset();
 	char *prev_name, *namep, *sstart;
 	unsigned long soff;
 	phandle child;
@@ -1592,41 +1716,38 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start,
 	char *namep, *prev_name, *sstart, *p, *ep, *lp, *path;
 	unsigned long soff;
 	unsigned char *valp;
-	unsigned long offset = reloc_offset();
 	static char pname[MAX_PROPERTY_NAME];
-	int l;
+	int l, room;
 
 	dt_push_token(OF_DT_BEGIN_NODE, mem_start, mem_end);
 
 	/* get the node's full name */
 	namep = (char *)*mem_start;
-	l = call_prom("package-to-path", 3, 1, node,
-		      namep, *mem_end - *mem_start);
+	room = *mem_end - *mem_start;
+	if (room > 255)
+		room = 255;
+	l = call_prom("package-to-path", 3, 1, node, namep, room);
 	if (l >= 0) {
 		/* Didn't fit?  Get more room. */
-		if ((l+1) > (*mem_end - *mem_start)) {
-			namep = make_room(mem_start, mem_end, l+1, 1);
+		if (l >= room) {
+			if (l >= *mem_end - *mem_start)
+				namep = make_room(mem_start, mem_end, l+1, 1);
 			call_prom("package-to-path", 3, 1, node, namep, l);
 		}
 		namep[l] = '\0';
 
 		/* Fixup an Apple bug where they have bogus \0 chars in the
-		 * middle of the path in some properties
+		 * middle of the path in some properties, and extract
+		 * the unit name (everything after the last '/').
 		 */
-		for (p = namep, ep = namep + l; p < ep; p++)
-			if (*p == '\0') {
-				memmove(p, p+1, ep - p);
-				ep--; l--; p--;
-			}
-
-		/* now try to extract the unit name in that mess */
-		for (p = namep, lp = NULL; *p; p++)
+		for (lp = p = namep, ep = namep + l; p < ep; p++) {
 			if (*p == '/')
-				lp = p + 1;
-		if (lp != NULL)
-			memmove(namep, lp, strlen(lp) + 1);
-		*mem_start = _ALIGN(((unsigned long) namep) +
-				    strlen(namep) + 1, 4);
+				lp = namep;
+			else if (*p != 0)
+				*lp++ = *p;
+		}
+		*lp = 0;
+		*mem_start = _ALIGN((unsigned long)lp + 1, 4);
 	}
 
 	/* get it again for debugging */
@@ -1708,10 +1829,9 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start,
 static void __init flatten_device_tree(void)
 {
 	phandle root;
-	unsigned long offset = reloc_offset();
 	unsigned long mem_start, mem_end, room;
 	struct boot_param_header *hdr;
-	struct prom_t *_prom = PTRRELOC(&prom);
+	struct prom_t *_prom = &RELOC(prom);
 	char *namep;
 	u64 *rsvmap;
 
@@ -1789,7 +1909,8 @@ static void __init flatten_device_tree(void)
 		int i;
 		prom_printf("reserved memory map:\n");
 		for (i = 0; i < RELOC(mem_reserve_cnt); i++)
-			prom_printf("  %x - %x\n", RELOC(mem_reserve_map)[i].base,
+			prom_printf("  %x - %x\n",
+				    RELOC(mem_reserve_map)[i].base,
 				    RELOC(mem_reserve_map)[i].size);
 	}
 #endif
@@ -1805,7 +1926,7 @@ static void __init flatten_device_tree(void)
 
 static void __init fixup_device_tree(void)
 {
-	unsigned long offset = reloc_offset();
+#if defined(CONFIG_PPC64) && defined(CONFIG_PPC_PMAC)
 	phandle u3, i2c, mpic;
 	u32 u3_rev;
 	u32 interrupts[2];
@@ -1826,7 +1947,7 @@ static void __init fixup_device_tree(void)
 	if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev))
 	    == PROM_ERROR)
 		return;
-	if (u3_rev != 0x35 && u3_rev != 0x37)
+	if (u3_rev < 0x35 || u3_rev > 0x39)
 		return;
 	/* does it need fixup ? */
 	if (prom_getproplen(i2c, "interrupts") > 0)
@@ -1837,22 +1958,25 @@ static void __init fixup_device_tree(void)
 	/* interrupt on this revision of u3 is number 0 and level */
 	interrupts[0] = 0;
 	interrupts[1] = 1;
-	prom_setprop(i2c, "interrupts", &interrupts, sizeof(interrupts));
+	prom_setprop(i2c, "/u3@0,f8000000/i2c@f8001000", "interrupts",
+		     &interrupts, sizeof(interrupts));
 	parent = (u32)mpic;
-	prom_setprop(i2c, "interrupt-parent", &parent, sizeof(parent));
+	prom_setprop(i2c, "/u3@0,f8000000/i2c@f8001000", "interrupt-parent",
+		     &parent, sizeof(parent));
+#endif
 }
 
 
 static void __init prom_find_boot_cpu(void)
 {
-	unsigned long offset = reloc_offset();
-       	struct prom_t *_prom = PTRRELOC(&prom);
+       	struct prom_t *_prom = &RELOC(prom);
 	u32 getprop_rval;
 	ihandle prom_cpu;
 	phandle cpu_pkg;
 
+	_prom->cpu = 0;
 	if (prom_getprop(_prom->chosen, "cpu", &prom_cpu, sizeof(prom_cpu)) <= 0)
-		prom_panic("cannot find boot cpu");
+		return;
 
 	cpu_pkg = call_prom("instance-to-package", 1, 1, prom_cpu);
 
@@ -1865,19 +1989,20 @@ static void __init prom_find_boot_cpu(void)
 static void __init prom_check_initrd(unsigned long r3, unsigned long r4)
 {
 #ifdef CONFIG_BLK_DEV_INITRD
-	unsigned long offset = reloc_offset();
-       	struct prom_t *_prom = PTRRELOC(&prom);
+       	struct prom_t *_prom = &RELOC(prom);
 
-	if ( r3 && r4 && r4 != 0xdeadbeef) {
-		u64 val;
+	if (r3 && r4 && r4 != 0xdeadbeef) {
+		unsigned long val;
 
 		RELOC(prom_initrd_start) = (r3 >= KERNELBASE) ? __pa(r3) : r3;
 		RELOC(prom_initrd_end) = RELOC(prom_initrd_start) + r4;
 
-		val = (u64)RELOC(prom_initrd_start);
-		prom_setprop(_prom->chosen, "linux,initrd-start", &val, sizeof(val));
-		val = (u64)RELOC(prom_initrd_end);
-		prom_setprop(_prom->chosen, "linux,initrd-end", &val, sizeof(val));
+		val = RELOC(prom_initrd_start);
+		prom_setprop(_prom->chosen, "/chosen", "linux,initrd-start",
+			     &val, sizeof(val));
+		val = RELOC(prom_initrd_end);
+		prom_setprop(_prom->chosen, "/chosen", "linux,initrd-end",
+			     &val, sizeof(val));
 
 		reserve_mem(RELOC(prom_initrd_start),
 			    RELOC(prom_initrd_end) - RELOC(prom_initrd_start));
@@ -1893,18 +2018,25 @@ static void __init prom_check_initrd(unsigned long r3, unsigned long r4)
  * handling exceptions and the MMU hash table for us.
  */
 
-unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long pp,
+unsigned long __init prom_init(unsigned long r3, unsigned long r4,
+			       unsigned long pp,
 			       unsigned long r6, unsigned long r7)
 {	
-	unsigned long offset = reloc_offset();
-       	struct prom_t *_prom = PTRRELOC(&prom);
-	unsigned long phys = KERNELBASE - offset;
+       	struct prom_t *_prom;
+	unsigned long hdr;
 	u32 getprop_rval;
-	
+	unsigned long offset = reloc_offset();
+
+#ifdef CONFIG_PPC32
+	reloc_got2(offset);
+#endif
+
+	_prom = &RELOC(prom);
+
 	/*
 	 * First zero the BSS
 	 */
-	memset(PTRRELOC(&__bss_start), 0, __bss_stop - __bss_start);
+	memset(&RELOC(__bss_start), 0, __bss_stop - __bss_start);
 
 	/*
 	 * Init interface to Open Firmware, get some node references,
@@ -1913,11 +2045,15 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long
 	prom_init_client_services(pp);
 
 	/*
+	 * See if this OF is old enough that we need to do explicit maps
+	 * and other workarounds
+	 */
+	prom_find_mmu();
+
+	/*
 	 * Init prom stdout device
 	 */
 	prom_init_stdout();
-	prom_debug("klimit=0x%x\n", RELOC(klimit));
-	prom_debug("offset=0x%x\n", offset);
 
 	/*
 	 * Check for an initrd
@@ -1925,37 +2061,28 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long
 	prom_check_initrd(r3, r4);
 
 	/*
-	 * Get default machine type. At this point, we do not differenciate
+	 * Get default machine type. At this point, we do not differentiate
 	 * between pSeries SMP and pSeries LPAR
 	 */
 	RELOC(of_platform) = prom_find_machine_type();
 	getprop_rval = RELOC(of_platform);
-	prom_setprop(_prom->chosen, "linux,platform",
+	prom_setprop(_prom->chosen, "/chosen", "linux,platform",
 		     &getprop_rval, sizeof(getprop_rval));
 
+#ifdef CONFIG_PPC_PSERIES
 	/*
 	 * On pSeries, inform the firmware about our capabilities
 	 */
-	if (RELOC(of_platform) & PLATFORM_PSERIES)
+	if (RELOC(of_platform) == PLATFORM_PSERIES ||
+	    RELOC(of_platform) == PLATFORM_PSERIES_LPAR)
 		prom_send_capabilities();
+#endif
 
 	/*
-	 * On pSeries and BPA, copy the CPU hold code
+	 * Copy the CPU hold code
 	 */
-       	if (RELOC(of_platform) & (PLATFORM_PSERIES | PLATFORM_BPA))
-       		copy_and_flush(0, KERNELBASE - offset, 0x100, 0);
-
-	/*
-	 * Get memory cells format
-	 */
-	getprop_rval = 1;
-	prom_getprop(_prom->root, "#size-cells",
-		     &getprop_rval, sizeof(getprop_rval));
-	_prom->root_size_cells = getprop_rval;
-	getprop_rval = 2;
-	prom_getprop(_prom->root, "#address-cells",
-		     &getprop_rval, sizeof(getprop_rval));
-	_prom->root_addr_cells = getprop_rval;
+       	if (RELOC(of_platform) != PLATFORM_POWERMAC)
+       		copy_and_flush(0, KERNELBASE + offset, 0x100, 0);
 
 	/*
 	 * Do early parsing of command line
@@ -1977,6 +2104,7 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long
 	 */
 	prom_check_displays();
 
+#ifdef CONFIG_PPC64
 	/*
 	 * Initialize IOMMU (TCE tables) on pSeries. Do that before anything else
 	 * that uses the allocator, we need to make sure we get the top of memory
@@ -1984,6 +2112,7 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long
 	 */
 	if (RELOC(of_platform) == PLATFORM_PSERIES)
 		prom_initialize_tce_table();
+#endif
 
 	/*
 	 * On non-powermacs, try to instantiate RTAS and puts all CPUs
@@ -1998,22 +2127,28 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long
 	/*
 	 * Fill in some infos for use by the kernel later on
 	 */
+	if (RELOC(prom_memory_limit))
+		prom_setprop(_prom->chosen, "/chosen", "linux,memory-limit",
+			     &RELOC(prom_memory_limit),
+			     sizeof(prom_memory_limit));
+#ifdef CONFIG_PPC64
 	if (RELOC(ppc64_iommu_off))
-		prom_setprop(_prom->chosen, "linux,iommu-off", NULL, 0);
+		prom_setprop(_prom->chosen, "/chosen", "linux,iommu-off",
+			     NULL, 0);
 
 	if (RELOC(iommu_force_on))
-		prom_setprop(_prom->chosen, "linux,iommu-force-on", NULL, 0);
-
-	if (RELOC(prom_memory_limit))
-		prom_setprop(_prom->chosen, "linux,memory-limit",
-			PTRRELOC(&prom_memory_limit), sizeof(RELOC(prom_memory_limit)));
+		prom_setprop(_prom->chosen, "/chosen", "linux,iommu-force-on",
+			     NULL, 0);
 
 	if (RELOC(prom_tce_alloc_start)) {
-		prom_setprop(_prom->chosen, "linux,tce-alloc-start",
-			PTRRELOC(&prom_tce_alloc_start), sizeof(RELOC(prom_tce_alloc_start)));
-		prom_setprop(_prom->chosen, "linux,tce-alloc-end",
-			PTRRELOC(&prom_tce_alloc_end), sizeof(RELOC(prom_tce_alloc_end)));
+		prom_setprop(_prom->chosen, "/chosen", "linux,tce-alloc-start",
+			     &RELOC(prom_tce_alloc_start),
+			     sizeof(prom_tce_alloc_start));
+		prom_setprop(_prom->chosen, "/chosen", "linux,tce-alloc-end",
+			     &RELOC(prom_tce_alloc_end),
+			     sizeof(prom_tce_alloc_end));
 	}
+#endif
 
 	/*
 	 * Fixup any known bugs in the device-tree
@@ -2023,11 +2158,16 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long
 	/*
 	 * Now finally create the flattened device-tree
 	 */
-       	prom_printf("copying OF device tree ...\n");
-       	flatten_device_tree();
+	prom_printf("copying OF device tree ...\n");
+	flatten_device_tree();
 
-	/* in case stdin is USB and still active on IBM machines... */
-	prom_close_stdin();
+	/*
+	 * in case stdin is USB and still active on IBM machines...
+	 * Unfortunately quiesce crashes on some powermacs if we have
+	 * closed stdin already (in particular the powerbook 101).
+	 */
+	if (RELOC(of_platform) != PLATFORM_POWERMAC)
+		prom_close_stdin();
 
 	/*
 	 * Call OF "quiesce" method to shut down pending DMA's from
@@ -2041,12 +2181,15 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long
 	 * tree and NULL as r5, thus triggering the new entry point which
 	 * is common to us and kexec
 	 */
+	hdr = RELOC(dt_header_start);
 	prom_printf("returning from prom_init\n");
-	prom_debug("->dt_header_start=0x%x\n", RELOC(dt_header_start));
-	prom_debug("->phys=0x%x\n", phys);
+	prom_debug("->dt_header_start=0x%x\n", hdr);
 
-	__start(RELOC(dt_header_start), phys, 0);
+#ifdef CONFIG_PPC32
+	reloc_got2(-offset);
+#endif
+
+	__start(hdr, KERNELBASE + offset, 0);
 
 	return 0;
 }
-
diff --git a/arch/powerpc/kernel/ptrace-common.h b/arch/powerpc/kernel/ptrace-common.h
new file mode 100644
index 000000000000..b1babb729673
--- /dev/null
+++ b/arch/powerpc/kernel/ptrace-common.h
@@ -0,0 +1,164 @@
+/*
+ *  linux/arch/ppc64/kernel/ptrace-common.h
+ *
+ *    Copyright (c) 2002 Stephen Rothwell, IBM Coproration
+ *    Extracted from ptrace.c and ptrace32.c
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file README.legal in the main directory of
+ * this archive for more details.
+ */
+
+#ifndef _PPC64_PTRACE_COMMON_H
+#define _PPC64_PTRACE_COMMON_H
+
+#include <linux/config.h>
+#include <asm/system.h>
+
+/*
+ * Set of msr bits that gdb can change on behalf of a process.
+ */
+#define MSR_DEBUGCHANGE	(MSR_FE0 | MSR_SE | MSR_BE | MSR_FE1)
+
+/*
+ * Get contents of register REGNO in task TASK.
+ */
+static inline unsigned long get_reg(struct task_struct *task, int regno)
+{
+	unsigned long tmp = 0;
+
+	/*
+	 * Put the correct FP bits in, they might be wrong as a result
+	 * of our lazy FP restore.
+	 */
+	if (regno == PT_MSR) {
+		tmp = ((unsigned long *)task->thread.regs)[PT_MSR];
+		tmp |= task->thread.fpexc_mode;
+	} else if (regno < (sizeof(struct pt_regs) / sizeof(unsigned long))) {
+		tmp = ((unsigned long *)task->thread.regs)[regno];
+	}
+
+	return tmp;
+}
+
+/*
+ * Write contents of register REGNO in task TASK.
+ */
+static inline int put_reg(struct task_struct *task, int regno,
+			  unsigned long data)
+{
+	if (regno < PT_SOFTE) {
+		if (regno == PT_MSR)
+			data = (data & MSR_DEBUGCHANGE)
+				| (task->thread.regs->msr & ~MSR_DEBUGCHANGE);
+		((unsigned long *)task->thread.regs)[regno] = data;
+		return 0;
+	}
+	return -EIO;
+}
+
+static inline void set_single_step(struct task_struct *task)
+{
+	struct pt_regs *regs = task->thread.regs;
+	if (regs != NULL)
+		regs->msr |= MSR_SE;
+	set_ti_thread_flag(task->thread_info, TIF_SINGLESTEP);
+}
+
+static inline void clear_single_step(struct task_struct *task)
+{
+	struct pt_regs *regs = task->thread.regs;
+	if (regs != NULL)
+		regs->msr &= ~MSR_SE;
+	clear_ti_thread_flag(task->thread_info, TIF_SINGLESTEP);
+}
+
+#ifdef CONFIG_ALTIVEC
+/*
+ * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go.
+ * The transfer totals 34 quadword.  Quadwords 0-31 contain the
+ * corresponding vector registers.  Quadword 32 contains the vscr as the
+ * last word (offset 12) within that quadword.  Quadword 33 contains the
+ * vrsave as the first word (offset 0) within the quadword.
+ *
+ * This definition of the VMX state is compatible with the current PPC32
+ * ptrace interface.  This allows signal handling and ptrace to use the
+ * same structures.  This also simplifies the implementation of a bi-arch
+ * (combined (32- and 64-bit) gdb.
+ */
+
+/*
+ * Get contents of AltiVec register state in task TASK
+ */
+static inline int get_vrregs(unsigned long __user *data,
+			     struct task_struct *task)
+{
+	unsigned long regsize;
+
+	/* copy AltiVec registers VR[0] .. VR[31] */
+	regsize = 32 * sizeof(vector128);
+	if (copy_to_user(data, task->thread.vr, regsize))
+		return -EFAULT;
+	data += (regsize / sizeof(unsigned long));
+
+	/* copy VSCR */
+	regsize = 1 * sizeof(vector128);
+	if (copy_to_user(data, &task->thread.vscr, regsize))
+		return -EFAULT;
+	data += (regsize / sizeof(unsigned long));
+
+	/* copy VRSAVE */
+	if (put_user(task->thread.vrsave, (u32 __user *)data))
+		return -EFAULT;
+
+	return 0;
+}
+
+/*
+ * Write contents of AltiVec register state into task TASK.
+ */
+static inline int set_vrregs(struct task_struct *task,
+			     unsigned long __user *data)
+{
+	unsigned long regsize;
+
+	/* copy AltiVec registers VR[0] .. VR[31] */
+	regsize = 32 * sizeof(vector128);
+	if (copy_from_user(task->thread.vr, data, regsize))
+		return -EFAULT;
+	data += (regsize / sizeof(unsigned long));
+
+	/* copy VSCR */
+	regsize = 1 * sizeof(vector128);
+	if (copy_from_user(&task->thread.vscr, data, regsize))
+		return -EFAULT;
+	data += (regsize / sizeof(unsigned long));
+
+	/* copy VRSAVE */
+	if (get_user(task->thread.vrsave, (u32 __user *)data))
+		return -EFAULT;
+
+	return 0;
+}
+#endif
+
+static inline int ptrace_set_debugreg(struct task_struct *task,
+				      unsigned long addr, unsigned long data)
+{
+	/* We only support one DABR and no IABRS at the moment */
+	if (addr > 0)
+		return -EINVAL;
+
+	/* The bottom 3 bits are flags */
+	if ((data & ~0x7UL) >= TASK_SIZE)
+		return -EIO;
+
+	/* Ensure translation is on */
+	if (data && !(data & DABR_TRANSLATION))
+		return -EIO;
+
+	task->thread.dabr = data;
+	return 0;
+}
+
+#endif /* _PPC64_PTRACE_COMMON_H */
diff --git a/arch/ppc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index e7aee4108dea..400793c71304 100644
--- a/arch/ppc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -1,6 +1,4 @@
 /*
- *  arch/ppc/kernel/ptrace.c
- *
  *  PowerPC version
  *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
  *
@@ -10,13 +8,14 @@
  *  linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
  *
  * Modified by Cort Dougan (cort@hq.fsmlabs.com)
- * and Paul Mackerras (paulus@linuxcare.com.au).
+ * and Paul Mackerras (paulus@samba.org).
  *
  * This file is subject to the terms and conditions of the GNU General
  * Public License.  See the file README.legal in the main directory of
  * this archive for more details.
  */
 
+#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
@@ -29,13 +28,20 @@
 #include <linux/signal.h>
 #include <linux/seccomp.h>
 #include <linux/audit.h>
+#ifdef CONFIG_PPC32
 #include <linux/module.h>
+#endif
 
 #include <asm/uaccess.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/system.h>
 
+#ifdef CONFIG_PPC64
+#include "ptrace-common.h"
+#endif
+
+#ifdef CONFIG_PPC32
 /*
  * Set of msr bits that gdb can change on behalf of a process.
  */
@@ -44,12 +50,14 @@
 #else
 #define MSR_DEBUGCHANGE	(MSR_SE | MSR_BE)
 #endif
+#endif /* CONFIG_PPC32 */
 
 /*
  * does not yet catch signals sent when the child dies.
  * in exit.c or in signal.c.
  */
 
+#ifdef CONFIG_PPC32
 /*
  * Get contents of register REGNO in task TASK.
  */
@@ -228,6 +236,7 @@ clear_single_step(struct task_struct *task)
 #endif
 	}
 }
+#endif /* CONFIG_PPC32 */
 
 /*
  * Called by kernel/ptrace.c when detaching..
@@ -240,46 +249,10 @@ void ptrace_disable(struct task_struct *child)
 	clear_single_step(child);
 }
 
-int sys_ptrace(long request, long pid, long addr, long data)
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
-	struct task_struct *child;
 	int ret = -EPERM;
 
-	lock_kernel();
-	if (request == PTRACE_TRACEME) {
-		/* are we already being traced? */
-		if (current->ptrace & PT_PTRACED)
-			goto out;
-		ret = security_ptrace(current->parent, current);
-		if (ret)
-			goto out;
-		/* set the ptrace bit in the process flags. */
-		current->ptrace |= PT_PTRACED;
-		ret = 0;
-		goto out;
-	}
-	ret = -ESRCH;
-	read_lock(&tasklist_lock);
-	child = find_task_by_pid(pid);
-	if (child)
-		get_task_struct(child);
-	read_unlock(&tasklist_lock);
-	if (!child)
-		goto out;
-
-	ret = -EPERM;
-	if (pid == 1)		/* you may not mess with init */
-		goto out_tsk;
-
-	if (request == PTRACE_ATTACH) {
-		ret = ptrace_attach(child);
-		goto out_tsk;
-	}
-
-	ret = ptrace_check_attach(child, request == PTRACE_KILL);
-	if (ret < 0)
-		goto out_tsk;
-
 	switch (request) {
 	/* when I and D space are separate, these will need to be fixed. */
 	case PTRACE_PEEKTEXT: /* read word at location addr. */
@@ -296,25 +269,28 @@ int sys_ptrace(long request, long pid, long addr, long data)
 	}
 
 	/* read the word at location addr in the USER area. */
-	/* XXX this will need fixing for 64-bit */
 	case PTRACE_PEEKUSR: {
 		unsigned long index, tmp;
 
 		ret = -EIO;
 		/* convert to index and check */
+#ifdef CONFIG_PPC32
 		index = (unsigned long) addr >> 2;
-		if ((addr & 3) || index > PT_FPSCR
-		    || child->thread.regs == NULL)
+		if ((addr & 3) || (index > PT_FPSCR)
+		    || (child->thread.regs == NULL))
+#else
+		index = (unsigned long) addr >> 3;
+		if ((addr & 7) || (index > PT_FPSCR))
+#endif
 			break;
 
+#ifdef CONFIG_PPC32
 		CHECK_FULL_REGS(child->thread.regs);
+#endif
 		if (index < PT_FPR0) {
 			tmp = get_reg(child, (int) index);
 		} else {
-			preempt_disable();
-			if (child->thread.regs->msr & MSR_FP)
-				giveup_fpu(child);
-			preempt_enable();
+			flush_fp_to_thread(child);
 			tmp = ((unsigned long *)child->thread.fpr)[index - PT_FPR0];
 		}
 		ret = put_user(tmp,(unsigned long __user *) data);
@@ -325,7 +301,8 @@ int sys_ptrace(long request, long pid, long addr, long data)
 	case PTRACE_POKETEXT: /* write the word at location addr. */
 	case PTRACE_POKEDATA:
 		ret = 0;
-		if (access_process_vm(child, addr, &data, sizeof(data), 1) == sizeof(data))
+		if (access_process_vm(child, addr, &data, sizeof(data), 1)
+				== sizeof(data))
 			break;
 		ret = -EIO;
 		break;
@@ -336,21 +313,25 @@ int sys_ptrace(long request, long pid, long addr, long data)
 
 		ret = -EIO;
 		/* convert to index and check */
+#ifdef CONFIG_PPC32
 		index = (unsigned long) addr >> 2;
-		if ((addr & 3) || index > PT_FPSCR
-		    || child->thread.regs == NULL)
+		if ((addr & 3) || (index > PT_FPSCR)
+		    || (child->thread.regs == NULL))
+#else
+		index = (unsigned long) addr >> 3;
+		if ((addr & 7) || (index > PT_FPSCR))
+#endif
 			break;
 
+#ifdef CONFIG_PPC32
 		CHECK_FULL_REGS(child->thread.regs);
+#endif
 		if (index == PT_ORIG_R3)
 			break;
 		if (index < PT_FPR0) {
 			ret = put_reg(child, index, data);
 		} else {
-			preempt_disable();
-			if (child->thread.regs->msr & MSR_FP)
-				giveup_fpu(child);
-			preempt_enable();
+			flush_fp_to_thread(child);
 			((unsigned long *)child->thread.fpr)[index - PT_FPR0] = data;
 			ret = 0;
 		}
@@ -362,11 +343,10 @@ int sys_ptrace(long request, long pid, long addr, long data)
 		ret = -EIO;
 		if (!valid_signal(data))
 			break;
-		if (request == PTRACE_SYSCALL) {
+		if (request == PTRACE_SYSCALL)
 			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		} else {
+		else
 			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		}
 		child->exit_code = data;
 		/* make sure the single step bit is not set. */
 		clear_single_step(child);
@@ -404,28 +384,102 @@ int sys_ptrace(long request, long pid, long addr, long data)
 		break;
 	}
 
+#ifdef CONFIG_PPC64
+	case PTRACE_GET_DEBUGREG: {
+		ret = -EINVAL;
+		/* We only support one DABR and no IABRS at the moment */
+		if (addr > 0)
+			break;
+		ret = put_user(child->thread.dabr,
+			       (unsigned long __user *)data);
+		break;
+	}
+
+	case PTRACE_SET_DEBUGREG:
+		ret = ptrace_set_debugreg(child, addr, data);
+		break;
+#endif
+
 	case PTRACE_DETACH:
 		ret = ptrace_detach(child, data);
 		break;
 
+#ifdef CONFIG_PPC64
+	case PPC_PTRACE_GETREGS: { /* Get GPRs 0 - 31. */
+		int i;
+		unsigned long *reg = &((unsigned long *)child->thread.regs)[0];
+		unsigned long __user *tmp = (unsigned long __user *)addr;
+
+		for (i = 0; i < 32; i++) {
+			ret = put_user(*reg, tmp);
+			if (ret)
+				break;
+			reg++;
+			tmp++;
+		}
+		break;
+	}
+
+	case PPC_PTRACE_SETREGS: { /* Set GPRs 0 - 31. */
+		int i;
+		unsigned long *reg = &((unsigned long *)child->thread.regs)[0];
+		unsigned long __user *tmp = (unsigned long __user *)addr;
+
+		for (i = 0; i < 32; i++) {
+			ret = get_user(*reg, tmp);
+			if (ret)
+				break;
+			reg++;
+			tmp++;
+		}
+		break;
+	}
+
+	case PPC_PTRACE_GETFPREGS: { /* Get FPRs 0 - 31. */
+		int i;
+		unsigned long *reg = &((unsigned long *)child->thread.fpr)[0];
+		unsigned long __user *tmp = (unsigned long __user *)addr;
+
+		flush_fp_to_thread(child);
+
+		for (i = 0; i < 32; i++) {
+			ret = put_user(*reg, tmp);
+			if (ret)
+				break;
+			reg++;
+			tmp++;
+		}
+		break;
+	}
+
+	case PPC_PTRACE_SETFPREGS: { /* Get FPRs 0 - 31. */
+		int i;
+		unsigned long *reg = &((unsigned long *)child->thread.fpr)[0];
+		unsigned long __user *tmp = (unsigned long __user *)addr;
+
+		flush_fp_to_thread(child);
+
+		for (i = 0; i < 32; i++) {
+			ret = get_user(*reg, tmp);
+			if (ret)
+				break;
+			reg++;
+			tmp++;
+		}
+		break;
+	}
+#endif /* CONFIG_PPC64 */
+
 #ifdef CONFIG_ALTIVEC
 	case PTRACE_GETVRREGS:
 		/* Get the child altivec register state. */
-		preempt_disable();
-		if (child->thread.regs->msr & MSR_VEC)
-			giveup_altivec(child);
-		preempt_enable();
+		flush_altivec_to_thread(child);
 		ret = get_vrregs((unsigned long __user *)data, child);
 		break;
 
 	case PTRACE_SETVRREGS:
 		/* Set the child altivec register state. */
-		/* this is to clear the MSR_VEC bit to force a reload
-		 * of register state from memory */
-		preempt_disable();
-		if (child->thread.regs->msr & MSR_VEC)
-			giveup_altivec(child);
-		preempt_enable();
+		flush_altivec_to_thread(child);
 		ret = set_vrregs(child, (unsigned long __user *)data);
 		break;
 #endif
@@ -451,10 +505,7 @@ int sys_ptrace(long request, long pid, long addr, long data)
 		ret = ptrace_request(child, request, addr, data);
 		break;
 	}
-out_tsk:
-	put_task_struct(child);
-out:
-	unlock_kernel();
+
 	return ret;
 }
 
@@ -478,12 +529,21 @@ static void do_syscall_trace(void)
 
 void do_syscall_trace_enter(struct pt_regs *regs)
 {
+#ifdef CONFIG_PPC64
+	secure_computing(regs->gpr[0]);
+#endif
+
 	if (test_thread_flag(TIF_SYSCALL_TRACE)
 	    && (current->ptrace & PT_PTRACED))
 		do_syscall_trace();
 
 	if (unlikely(current->audit_context))
-		audit_syscall_entry(current, AUDIT_ARCH_PPC,
+		audit_syscall_entry(current,
+#ifdef CONFIG_PPC32
+				    AUDIT_ARCH_PPC,
+#else
+				    test_thread_flag(TIF_32BIT)?AUDIT_ARCH_PPC:AUDIT_ARCH_PPC64,
+#endif
 				    regs->gpr[0],
 				    regs->gpr[3], regs->gpr[4],
 				    regs->gpr[5], regs->gpr[6]);
@@ -491,17 +551,25 @@ void do_syscall_trace_enter(struct pt_regs *regs)
 
 void do_syscall_trace_leave(struct pt_regs *regs)
 {
+#ifdef CONFIG_PPC32
 	secure_computing(regs->gpr[0]);
+#endif
 
 	if (unlikely(current->audit_context))
 		audit_syscall_exit(current,
 				   (regs->ccr&0x1000)?AUDITSC_FAILURE:AUDITSC_SUCCESS,
 				   regs->result);
 
-	if ((test_thread_flag(TIF_SYSCALL_TRACE))
+	if ((test_thread_flag(TIF_SYSCALL_TRACE)
+#ifdef CONFIG_PPC64
+	     || test_thread_flag(TIF_SINGLESTEP)
+#endif
+	     )
 	    && (current->ptrace & PT_PTRACED))
 		do_syscall_trace();
 }
 
+#ifdef CONFIG_PPC32
 EXPORT_SYMBOL(do_syscall_trace_enter);
 EXPORT_SYMBOL(do_syscall_trace_leave);
+#endif
diff --git a/arch/ppc64/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c
index fb8c22d6084a..61762640b877 100644
--- a/arch/ppc64/kernel/ptrace32.c
+++ b/arch/powerpc/kernel/ptrace32.c
@@ -1,5 +1,5 @@
 /*
- *  linux/arch/ppc64/kernel/ptrace32.c
+ * ptrace for 32-bit processes running on a 64-bit kernel.
  *
  *  PowerPC version
  *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
@@ -10,10 +10,10 @@
  *  linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
  *
  * Modified by Cort Dougan (cort@hq.fsmlabs.com)
- * and Paul Mackerras (paulus@linuxcare.com.au).
+ * and Paul Mackerras (paulus@samba.org).
  *
  * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file README.legal in the main directory of
+ * Public License.  See the file COPYING in the main directory of
  * this archive for more details.
  */
 
@@ -33,14 +33,16 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/system.h>
-#include <asm/ptrace-common.h>
+
+#include "ptrace-common.h"
 
 /*
  * does not yet catch signals sent when the child dies.
  * in exit.c or in signal.c.
  */
 
-int sys32_ptrace(long request, long pid, unsigned long addr, unsigned long data)
+long compat_sys_ptrace(int request, int pid, unsigned long addr,
+		       unsigned long data)
 {
 	struct task_struct *child;
 	int ret = -EPERM;
diff --git a/arch/ppc64/kernel/rtas-proc.c b/arch/powerpc/kernel/rtas-proc.c
index 1f3ff860fdf0..7a95b8a28354 100644
--- a/arch/ppc64/kernel/rtas-proc.c
+++ b/arch/powerpc/kernel/rtas-proc.c
@@ -23,6 +23,7 @@
 #include <linux/init.h>
 #include <linux/seq_file.h>
 #include <linux/bitops.h>
+#include <linux/rtc.h>
 
 #include <asm/uaccess.h>
 #include <asm/processor.h>
@@ -31,7 +32,6 @@
 #include <asm/rtas.h>
 #include <asm/machdep.h> /* for ppc_md */
 #include <asm/time.h>
-#include <asm/systemcfg.h>
 
 /* Token for Sensors */
 #define KEY_SWITCH		0x0001
@@ -258,7 +258,7 @@ static int __init proc_rtas_init(void)
 {
 	struct proc_dir_entry *entry;
 
-	if (!(systemcfg->platform & PLATFORM_PSERIES))
+	if (_machine != PLATFORM_PSERIES && _machine != PLATFORM_PSERIES_LPAR)
 		return 1;
 
 	rtas_node = of_find_node_by_name(NULL, "rtas");
diff --git a/arch/powerpc/kernel/rtas-rtc.c b/arch/powerpc/kernel/rtas-rtc.c
new file mode 100644
index 000000000000..635d3b9a8811
--- /dev/null
+++ b/arch/powerpc/kernel/rtas-rtc.c
@@ -0,0 +1,105 @@
+#include <linux/kernel.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/rtc.h>
+#include <linux/delay.h>
+#include <asm/prom.h>
+#include <asm/rtas.h>
+#include <asm/time.h>
+
+
+#define MAX_RTC_WAIT 5000	/* 5 sec */
+#define RTAS_CLOCK_BUSY (-2)
+unsigned long __init rtas_get_boot_time(void)
+{
+	int ret[8];
+	int error, wait_time;
+	u64 max_wait_tb;
+
+	max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT;
+	do {
+		error = rtas_call(rtas_token("get-time-of-day"), 0, 8, ret);
+		if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) {
+			wait_time = rtas_extended_busy_delay_time(error);
+			/* This is boot time so we spin. */
+			udelay(wait_time*1000);
+			error = RTAS_CLOCK_BUSY;
+		}
+	} while (error == RTAS_CLOCK_BUSY && (get_tb() < max_wait_tb));
+
+	if (error != 0 && printk_ratelimit()) {
+		printk(KERN_WARNING "error: reading the clock failed (%d)\n",
+			error);
+		return 0;
+	}
+
+	return mktime(ret[0], ret[1], ret[2], ret[3], ret[4], ret[5]);
+}
+
+/* NOTE: get_rtc_time will get an error if executed in interrupt context
+ * and if a delay is needed to read the clock.  In this case we just
+ * silently return without updating rtc_tm.
+ */
+void rtas_get_rtc_time(struct rtc_time *rtc_tm)
+{
+        int ret[8];
+	int error, wait_time;
+	u64 max_wait_tb;
+
+	max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT;
+	do {
+		error = rtas_call(rtas_token("get-time-of-day"), 0, 8, ret);
+		if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) {
+			if (in_interrupt() && printk_ratelimit()) {
+				memset(&rtc_tm, 0, sizeof(struct rtc_time));
+				printk(KERN_WARNING "error: reading clock"
+				       " would delay interrupt\n");
+				return;	/* delay not allowed */
+			}
+			wait_time = rtas_extended_busy_delay_time(error);
+			msleep(wait_time);
+			error = RTAS_CLOCK_BUSY;
+		}
+	} while (error == RTAS_CLOCK_BUSY && (get_tb() < max_wait_tb));
+
+        if (error != 0 && printk_ratelimit()) {
+                printk(KERN_WARNING "error: reading the clock failed (%d)\n",
+		       error);
+		return;
+        }
+
+	rtc_tm->tm_sec = ret[5];
+	rtc_tm->tm_min = ret[4];
+	rtc_tm->tm_hour = ret[3];
+	rtc_tm->tm_mday = ret[2];
+	rtc_tm->tm_mon = ret[1] - 1;
+	rtc_tm->tm_year = ret[0] - 1900;
+}
+
+int rtas_set_rtc_time(struct rtc_time *tm)
+{
+	int error, wait_time;
+	u64 max_wait_tb;
+
+	max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT;
+	do {
+	        error = rtas_call(rtas_token("set-time-of-day"), 7, 1, NULL,
+				  tm->tm_year + 1900, tm->tm_mon + 1,
+				  tm->tm_mday, tm->tm_hour, tm->tm_min,
+				  tm->tm_sec, 0);
+		if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) {
+			if (in_interrupt())
+				return 1;	/* probably decrementer */
+			wait_time = rtas_extended_busy_delay_time(error);
+			msleep(wait_time);
+			error = RTAS_CLOCK_BUSY;
+		}
+	} while (error == RTAS_CLOCK_BUSY && (get_tb() < max_wait_tb));
+
+        if (error != 0 && printk_ratelimit())
+                printk(KERN_WARNING "error: setting the clock failed (%d)\n",
+		       error);
+
+        return 0;
+}
diff --git a/arch/ppc64/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 5e8eb33b8e54..4283fa33f784 100644
--- a/arch/ppc64/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -17,6 +17,7 @@
 #include <linux/spinlock.h>
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/delay.h>
 
 #include <asm/prom.h>
 #include <asm/rtas.h>
@@ -25,28 +26,33 @@
 #include <asm/page.h>
 #include <asm/param.h>
 #include <asm/system.h>
-#include <asm/abs_addr.h>
-#include <asm/udbg.h>
 #include <asm/delay.h>
 #include <asm/uaccess.h>
-#include <asm/systemcfg.h>
+#include <asm/lmb.h>
 
-struct flash_block_list_header rtas_firmware_flash_list = {0, NULL};
-
-struct rtas_t rtas = { 
+struct rtas_t rtas = {
 	.lock = SPIN_LOCK_UNLOCKED
 };
 
 EXPORT_SYMBOL(rtas);
 
-char rtas_err_buf[RTAS_ERROR_LOG_MAX];
-
 DEFINE_SPINLOCK(rtas_data_buf_lock);
-char rtas_data_buf[RTAS_DATA_BUF_SIZE]__page_aligned;
+char rtas_data_buf[RTAS_DATA_BUF_SIZE] __cacheline_aligned;
 unsigned long rtas_rmo_buf;
 
-void
-call_rtas_display_status(unsigned char c)
+/*
+ * If non-NULL, this gets called when the kernel terminates.
+ * This is done like this so rtas_flash can be a module.
+ */
+void (*rtas_flash_term_hook)(int);
+EXPORT_SYMBOL(rtas_flash_term_hook);
+
+/*
+ * call_rtas_display_status and call_rtas_display_status_delay
+ * are designed only for very early low-level debugging, which
+ * is why the token is hard-coded to 10.
+ */
+void call_rtas_display_status(unsigned char c)
 {
 	struct rtas_args *args = &rtas.args;
 	unsigned long s;
@@ -66,8 +72,7 @@ call_rtas_display_status(unsigned char c)
 	spin_unlock_irqrestore(&rtas.lock, s);
 }
 
-void
-call_rtas_display_status_delay(unsigned char c)
+void call_rtas_display_status_delay(unsigned char c)
 {
 	static int pending_newline = 0;  /* did last write end with unprinted newline? */
 	static int width = 16;
@@ -76,7 +81,7 @@ call_rtas_display_status_delay(unsigned char c)
 		while (width-- > 0)
 			call_rtas_display_status(' ');
 		width = 16;
-		udelay(500000);
+		mdelay(500);
 		pending_newline = 1;
 	} else {
 		if (pending_newline) {
@@ -91,8 +96,7 @@ call_rtas_display_status_delay(unsigned char c)
 	}
 }
 
-void
-rtas_progress(char *s, unsigned short hex)
+void rtas_progress(char *s, unsigned short hex)
 {
 	struct device_node *root;
 	int width, *p;
@@ -207,19 +211,18 @@ rtas_progress(char *s, unsigned short hex)
  
 	spin_unlock(&progress_lock);
 }
+EXPORT_SYMBOL(rtas_progress);		/* needed by rtas_flash module */
 
-int
-rtas_token(const char *service)
+int rtas_token(const char *service)
 {
 	int *tokp;
-	if (rtas.dev == NULL) {
-		PPCDBG(PPCDBG_RTAS,"\tNo rtas device in device-tree...\n");
+	if (rtas.dev == NULL)
 		return RTAS_UNKNOWN_SERVICE;
-	}
 	tokp = (int *) get_property(rtas.dev, service, NULL);
 	return tokp ? *tokp : RTAS_UNKNOWN_SERVICE;
 }
 
+#ifdef CONFIG_RTAS_ERROR_LOGGING
 /*
  * Return the firmware-specified size of the error log buffer
  *  for all rtas calls that require an error buffer argument.
@@ -234,31 +237,38 @@ int rtas_get_error_log_max(void)
 	rtas_error_log_max = rtas_token ("rtas-error-log-max");
 	if ((rtas_error_log_max == RTAS_UNKNOWN_SERVICE) ||
 	    (rtas_error_log_max > RTAS_ERROR_LOG_MAX)) {
-		printk (KERN_WARNING "RTAS: bad log buffer size %d\n", rtas_error_log_max);
+		printk (KERN_WARNING "RTAS: bad log buffer size %d\n",
+			rtas_error_log_max);
 		rtas_error_log_max = RTAS_ERROR_LOG_MAX;
 	}
 	return rtas_error_log_max;
 }
+EXPORT_SYMBOL(rtas_get_error_log_max);
 
 
+char rtas_err_buf[RTAS_ERROR_LOG_MAX];
+int rtas_last_error_token;
+
 /** Return a copy of the detailed error text associated with the
  *  most recent failed call to rtas.  Because the error text
  *  might go stale if there are any other intervening rtas calls,
  *  this routine must be called atomically with whatever produced
  *  the error (i.e. with rtas.lock still held from the previous call).
  */
-static int
-__fetch_rtas_last_error(void)
+static char *__fetch_rtas_last_error(char *altbuf)
 {
 	struct rtas_args err_args, save_args;
 	u32 bufsz;
+	char *buf = NULL;
+
+	if (rtas_last_error_token == -1)
+		return NULL;
 
 	bufsz = rtas_get_error_log_max();
 
-	err_args.token = rtas_token("rtas-last-error");
+	err_args.token = rtas_last_error_token;
 	err_args.nargs = 2;
 	err_args.nret = 1;
-
 	err_args.args[0] = (rtas_arg_t)__pa(rtas_err_buf);
 	err_args.args[1] = bufsz;
 	err_args.args[2] = 0;
@@ -271,23 +281,38 @@ __fetch_rtas_last_error(void)
 	err_args = rtas.args;
 	rtas.args = save_args;
 
-	return err_args.args[2];
+	/* Log the error in the unlikely case that there was one. */
+	if (unlikely(err_args.args[2] == 0)) {
+		if (altbuf) {
+			buf = altbuf;
+		} else {
+			buf = rtas_err_buf;
+			if (mem_init_done)
+				buf = kmalloc(RTAS_ERROR_LOG_MAX, GFP_ATOMIC);
+		}
+		if (buf)
+			memcpy(buf, rtas_err_buf, RTAS_ERROR_LOG_MAX);
+	}
+
+	return buf;
 }
 
+#define get_errorlog_buffer()	kmalloc(RTAS_ERROR_LOG_MAX, GFP_KERNEL)
+
+#else /* CONFIG_RTAS_ERROR_LOGGING */
+#define __fetch_rtas_last_error(x)	NULL
+#define get_errorlog_buffer()		NULL
+#endif
+
 int rtas_call(int token, int nargs, int nret, int *outputs, ...)
 {
 	va_list list;
-	int i, logit = 0;
+	int i;
 	unsigned long s;
 	struct rtas_args *rtas_args;
-	char * buff_copy = NULL;
+	char *buff_copy = NULL;
 	int ret;
 
-	PPCDBG(PPCDBG_RTAS, "Entering rtas_call\n");
-	PPCDBG(PPCDBG_RTAS, "\ttoken    = 0x%x\n", token);
-	PPCDBG(PPCDBG_RTAS, "\tnargs    = %d\n", nargs);
-	PPCDBG(PPCDBG_RTAS, "\tnret     = %d\n", nret);
-	PPCDBG(PPCDBG_RTAS, "\t&outputs = 0x%lx\n", outputs);
 	if (token == RTAS_UNKNOWN_SERVICE)
 		return -1;
 
@@ -300,46 +325,25 @@ int rtas_call(int token, int nargs, int nret, int *outputs, ...)
 	rtas_args->nret  = nret;
 	rtas_args->rets  = (rtas_arg_t *)&(rtas_args->args[nargs]);
 	va_start(list, outputs);
-	for (i = 0; i < nargs; ++i) {
+	for (i = 0; i < nargs; ++i)
 		rtas_args->args[i] = va_arg(list, rtas_arg_t);
-		PPCDBG(PPCDBG_RTAS, "\tnarg[%d] = 0x%x\n", i, rtas_args->args[i]);
-	}
 	va_end(list);
 
 	for (i = 0; i < nret; ++i)
 		rtas_args->rets[i] = 0;
 
-	PPCDBG(PPCDBG_RTAS, "\tentering rtas with 0x%lx\n",
-		__pa(rtas_args));
 	enter_rtas(__pa(rtas_args));
-	PPCDBG(PPCDBG_RTAS, "\treturned from rtas ...\n");
 
 	/* A -1 return code indicates that the last command couldn't
 	   be completed due to a hardware error. */
 	if (rtas_args->rets[0] == -1)
-		logit = (__fetch_rtas_last_error() == 0);
-
-	ifppcdebug(PPCDBG_RTAS) {
-		for(i=0; i < nret ;i++)
-			udbg_printf("\tnret[%d] = 0x%lx\n", i, (ulong)rtas_args->rets[i]);
-	}
+		buff_copy = __fetch_rtas_last_error(NULL);
 
 	if (nret > 1 && outputs != NULL)
 		for (i = 0; i < nret-1; ++i)
 			outputs[i] = rtas_args->rets[i+1];
 	ret = (nret > 0)? rtas_args->rets[0]: 0;
 
-	/* Log the error in the unlikely case that there was one. */
-	if (unlikely(logit)) {
-		buff_copy = rtas_err_buf;
-		if (mem_init_done) {
-			buff_copy = kmalloc(RTAS_ERROR_LOG_MAX, GFP_ATOMIC);
-			if (buff_copy)
-				memcpy(buff_copy, rtas_err_buf,
-				       RTAS_ERROR_LOG_MAX);
-		}
-	}
-
 	/* Gotta do something different here, use global lock for now... */
 	spin_unlock_irqrestore(&rtas.lock, s);
 
@@ -354,8 +358,7 @@ int rtas_call(int token, int nargs, int nret, int *outputs, ...)
 /* Given an RTAS status code of 990n compute the hinted delay of 10^n
  * (last digit) milliseconds.  For now we bound at n=5 (100 sec).
  */
-unsigned int
-rtas_extended_busy_delay_time(int status)
+unsigned int rtas_extended_busy_delay_time(int status)
 {
 	int order = status - 9900;
 	unsigned long ms;
@@ -366,7 +369,7 @@ rtas_extended_busy_delay_time(int status)
 		order = 5;	/* bound */
 
 	/* Use microseconds for reasonable accuracy */
-	for (ms=1; order > 0; order--)
+	for (ms = 1; order > 0; order--)
 		ms *= 10;
 
 	return ms; 
@@ -493,113 +496,33 @@ int rtas_set_indicator(int indicator, int index, int new_value)
 	return rc;
 }
 
-#define FLASH_BLOCK_LIST_VERSION (1UL)
-static void
-rtas_flash_firmware(void)
+void rtas_restart(char *cmd)
 {
-	unsigned long image_size;
-	struct flash_block_list *f, *next, *flist;
-	unsigned long rtas_block_list;
-	int i, status, update_token;
-
-	update_token = rtas_token("ibm,update-flash-64-and-reboot");
-	if (update_token == RTAS_UNKNOWN_SERVICE) {
-		printk(KERN_ALERT "FLASH: ibm,update-flash-64-and-reboot is not available -- not a service partition?\n");
-		printk(KERN_ALERT "FLASH: firmware will not be flashed\n");
-		return;
-	}
-
-	/* NOTE: the "first" block list is a global var with no data
-	 * blocks in the kernel data segment.  We do this because
-	 * we want to ensure this block_list addr is under 4GB.
-	 */
-	rtas_firmware_flash_list.num_blocks = 0;
-	flist = (struct flash_block_list *)&rtas_firmware_flash_list;
-	rtas_block_list = virt_to_abs(flist);
-	if (rtas_block_list >= 4UL*1024*1024*1024) {
-		printk(KERN_ALERT "FLASH: kernel bug...flash list header addr above 4GB\n");
-		return;
-	}
-
-	printk(KERN_ALERT "FLASH: preparing saved firmware image for flash\n");
-	/* Update the block_list in place. */
-	image_size = 0;
-	for (f = flist; f; f = next) {
-		/* Translate data addrs to absolute */
-		for (i = 0; i < f->num_blocks; i++) {
-			f->blocks[i].data = (char *)virt_to_abs(f->blocks[i].data);
-			image_size += f->blocks[i].length;
-		}
-		next = f->next;
-		/* Don't translate NULL pointer for last entry */
-		if (f->next)
-			f->next = (struct flash_block_list *)virt_to_abs(f->next);
-		else
-			f->next = NULL;
-		/* make num_blocks into the version/length field */
-		f->num_blocks = (FLASH_BLOCK_LIST_VERSION << 56) | ((f->num_blocks+1)*16);
-	}
-
-	printk(KERN_ALERT "FLASH: flash image is %ld bytes\n", image_size);
-	printk(KERN_ALERT "FLASH: performing flash and reboot\n");
-	rtas_progress("Flashing        \n", 0x0);
-	rtas_progress("Please Wait...  ", 0x0);
-	printk(KERN_ALERT "FLASH: this will take several minutes.  Do not power off!\n");
-	status = rtas_call(update_token, 1, 1, NULL, rtas_block_list);
-	switch (status) {	/* should only get "bad" status */
-	    case 0:
-		printk(KERN_ALERT "FLASH: success\n");
-		break;
-	    case -1:
-		printk(KERN_ALERT "FLASH: hardware error.  Firmware may not be not flashed\n");
-		break;
-	    case -3:
-		printk(KERN_ALERT "FLASH: image is corrupt or not correct for this platform.  Firmware not flashed\n");
-		break;
-	    case -4:
-		printk(KERN_ALERT "FLASH: flash failed when partially complete.  System may not reboot\n");
-		break;
-	    default:
-		printk(KERN_ALERT "FLASH: unknown flash return code %d\n", status);
-		break;
-	}
-}
-
-void rtas_flash_bypass_warning(void)
-{
-	printk(KERN_ALERT "FLASH: firmware flash requires a reboot\n");
-	printk(KERN_ALERT "FLASH: the firmware image will NOT be flashed\n");
-}
-
-
-void
-rtas_restart(char *cmd)
-{
-	if (rtas_firmware_flash_list.next)
-		rtas_flash_firmware();
-
+	if (rtas_flash_term_hook)
+		rtas_flash_term_hook(SYS_RESTART);
 	printk("RTAS system-reboot returned %d\n",
 	       rtas_call(rtas_token("system-reboot"), 0, 1, NULL));
 	for (;;);
 }
 
-void
-rtas_power_off(void)
+void rtas_power_off(void)
 {
-	if (rtas_firmware_flash_list.next)
-		rtas_flash_bypass_warning();
+	if (rtas_flash_term_hook)
+		rtas_flash_term_hook(SYS_POWER_OFF);
 	/* allow power on only with power button press */
 	printk("RTAS power-off returned %d\n",
 	       rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1));
 	for (;;);
 }
 
-void
-rtas_halt(void)
+void rtas_halt(void)
 {
-	if (rtas_firmware_flash_list.next)
-		rtas_flash_bypass_warning();
-	rtas_power_off();
+	if (rtas_flash_term_hook)
+		rtas_flash_term_hook(SYS_HALT);
+	/* allow power on only with power button press */
+	printk("RTAS power-off returned %d\n",
+	       rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1));
+	for (;;);
 }
 
 /* Must be in the RMO region, so we place it here */
@@ -631,9 +554,8 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs)
 {
 	struct rtas_args args;
 	unsigned long flags;
-	char * buff_copy;
+	char *buff_copy, *errbuf = NULL;
 	int nargs;
-	int err_rc = 0;
 
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;
@@ -652,7 +574,7 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs)
 			   nargs * sizeof(rtas_arg_t)) != 0)
 		return -EFAULT;
 
-	buff_copy = kmalloc(RTAS_ERROR_LOG_MAX, GFP_KERNEL);
+	buff_copy = get_errorlog_buffer();
 
 	spin_lock_irqsave(&rtas.lock, flags);
 
@@ -664,19 +586,14 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs)
 
 	/* A -1 return code indicates that the last command couldn't
 	   be completed due to a hardware error. */
-	if (args.rets[0] == -1) {
-		err_rc = __fetch_rtas_last_error();
-		if ((err_rc == 0) && buff_copy) {
-			memcpy(buff_copy, rtas_err_buf, RTAS_ERROR_LOG_MAX);
-		}
-	}
+	if (args.rets[0] == -1)
+		errbuf = __fetch_rtas_last_error(buff_copy);
 
 	spin_unlock_irqrestore(&rtas.lock, flags);
 
 	if (buff_copy) {
-		if ((args.rets[0] == -1) && (err_rc == 0)) {
-			log_error(buff_copy, ERR_TYPE_RTAS_LOG, 0);
-		}
+		if (errbuf)
+			log_error(errbuf, ERR_TYPE_RTAS_LOG, 0);
 		kfree(buff_copy);
 	}
 
@@ -721,6 +638,8 @@ void rtas_stop_self(void)
  */
 void __init rtas_initialize(void)
 {
+	unsigned long rtas_region = RTAS_INSTANTIATE_MAX;
+
 	/* Get RTAS dev node and fill up our "rtas" structure with infos
 	 * about it.
 	 */
@@ -742,26 +661,27 @@ void __init rtas_initialize(void)
 		} else
 			rtas.dev = NULL;
 	}
+	if (!rtas.dev)
+		return;
+
 	/* If RTAS was found, allocate the RMO buffer for it and look for
 	 * the stop-self token if any
 	 */
-	if (rtas.dev) {
-		unsigned long rtas_region = RTAS_INSTANTIATE_MAX;
-		if (systemcfg->platform == PLATFORM_PSERIES_LPAR)
-			rtas_region = min(lmb.rmo_size, RTAS_INSTANTIATE_MAX);
-
-		rtas_rmo_buf = lmb_alloc_base(RTAS_RMOBUF_MAX, PAGE_SIZE,
-							rtas_region);
+#ifdef CONFIG_PPC64
+	if (_machine == PLATFORM_PSERIES_LPAR)
+		rtas_region = min(lmb.rmo_size, RTAS_INSTANTIATE_MAX);
+#endif
+	rtas_rmo_buf = lmb_alloc_base(RTAS_RMOBUF_MAX, PAGE_SIZE, rtas_region);
 
 #ifdef CONFIG_HOTPLUG_CPU
-		rtas_stop_self_args.token = rtas_token("stop-self");
+	rtas_stop_self_args.token = rtas_token("stop-self");
 #endif /* CONFIG_HOTPLUG_CPU */
-	}
-
+#ifdef CONFIG_RTAS_ERROR_LOGGING
+	rtas_last_error_token = rtas_token("rtas-last-error");
+#endif
 }
 
 
-EXPORT_SYMBOL(rtas_firmware_flash_list);
 EXPORT_SYMBOL(rtas_token);
 EXPORT_SYMBOL(rtas_call);
 EXPORT_SYMBOL(rtas_data_buf);
@@ -771,4 +691,3 @@ EXPORT_SYMBOL(rtas_get_sensor);
 EXPORT_SYMBOL(rtas_get_power_level);
 EXPORT_SYMBOL(rtas_set_power_level);
 EXPORT_SYMBOL(rtas_set_indicator);
-EXPORT_SYMBOL(rtas_get_error_log_max);
diff --git a/arch/ppc64/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c
index 923e2e201a70..50500093c97f 100644
--- a/arch/ppc64/kernel/rtas_flash.c
+++ b/arch/powerpc/kernel/rtas_flash.c
@@ -19,6 +19,7 @@
 #include <asm/delay.h>
 #include <asm/uaccess.h>
 #include <asm/rtas.h>
+#include <asm/abs_addr.h>
 
 #define MODULE_VERS "1.0"
 #define MODULE_NAME "rtas_flash"
@@ -71,10 +72,36 @@
 #define VALIDATE_BUF_SIZE 4096    
 #define RTAS_MSG_MAXLEN   64
 
+struct flash_block {
+	char *data;
+	unsigned long length;
+};
+
+/* This struct is very similar but not identical to
+ * that needed by the rtas flash update.
+ * All we need to do for rtas is rewrite num_blocks
+ * into a version/length and translate the pointers
+ * to absolute.
+ */
+#define FLASH_BLOCKS_PER_NODE ((PAGE_SIZE - 16) / sizeof(struct flash_block))
+struct flash_block_list {
+	unsigned long num_blocks;
+	struct flash_block_list *next;
+	struct flash_block blocks[FLASH_BLOCKS_PER_NODE];
+};
+struct flash_block_list_header { /* just the header of flash_block_list */
+	unsigned long num_blocks;
+	struct flash_block_list *next;
+};
+
+static struct flash_block_list_header rtas_firmware_flash_list = {0, NULL};
+
+#define FLASH_BLOCK_LIST_VERSION (1UL)
+
 /* Local copy of the flash block list.
  * We only allow one open of the flash proc file and create this
- * list as we go.  This list will be put in the kernel's
- * rtas_firmware_flash_list global var once it is fully read.
+ * list as we go.  This list will be put in the
+ * rtas_firmware_flash_list var once it is fully read.
  *
  * For convenience as we build the list we use virtual addrs,
  * we do not fill in the version number, and the length field
@@ -562,6 +589,86 @@ static int validate_flash_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
+static void rtas_flash_firmware(int reboot_type)
+{
+	unsigned long image_size;
+	struct flash_block_list *f, *next, *flist;
+	unsigned long rtas_block_list;
+	int i, status, update_token;
+
+	if (rtas_firmware_flash_list.next == NULL)
+		return;		/* nothing to do */
+
+	if (reboot_type != SYS_RESTART) {
+		printk(KERN_ALERT "FLASH: firmware flash requires a reboot\n");
+		printk(KERN_ALERT "FLASH: the firmware image will NOT be flashed\n");
+		return;
+	}
+
+	update_token = rtas_token("ibm,update-flash-64-and-reboot");
+	if (update_token == RTAS_UNKNOWN_SERVICE) {
+		printk(KERN_ALERT "FLASH: ibm,update-flash-64-and-reboot "
+		       "is not available -- not a service partition?\n");
+		printk(KERN_ALERT "FLASH: firmware will not be flashed\n");
+		return;
+	}
+
+	/* NOTE: the "first" block list is a global var with no data
+	 * blocks in the kernel data segment.  We do this because
+	 * we want to ensure this block_list addr is under 4GB.
+	 */
+	rtas_firmware_flash_list.num_blocks = 0;
+	flist = (struct flash_block_list *)&rtas_firmware_flash_list;
+	rtas_block_list = virt_to_abs(flist);
+	if (rtas_block_list >= 4UL*1024*1024*1024) {
+		printk(KERN_ALERT "FLASH: kernel bug...flash list header addr above 4GB\n");
+		return;
+	}
+
+	printk(KERN_ALERT "FLASH: preparing saved firmware image for flash\n");
+	/* Update the block_list in place. */
+	image_size = 0;
+	for (f = flist; f; f = next) {
+		/* Translate data addrs to absolute */
+		for (i = 0; i < f->num_blocks; i++) {
+			f->blocks[i].data = (char *)virt_to_abs(f->blocks[i].data);
+			image_size += f->blocks[i].length;
+		}
+		next = f->next;
+		/* Don't translate NULL pointer for last entry */
+		if (f->next)
+			f->next = (struct flash_block_list *)virt_to_abs(f->next);
+		else
+			f->next = NULL;
+		/* make num_blocks into the version/length field */
+		f->num_blocks = (FLASH_BLOCK_LIST_VERSION << 56) | ((f->num_blocks+1)*16);
+	}
+
+	printk(KERN_ALERT "FLASH: flash image is %ld bytes\n", image_size);
+	printk(KERN_ALERT "FLASH: performing flash and reboot\n");
+	rtas_progress("Flashing        \n", 0x0);
+	rtas_progress("Please Wait...  ", 0x0);
+	printk(KERN_ALERT "FLASH: this will take several minutes.  Do not power off!\n");
+	status = rtas_call(update_token, 1, 1, NULL, rtas_block_list);
+	switch (status) {	/* should only get "bad" status */
+	    case 0:
+		printk(KERN_ALERT "FLASH: success\n");
+		break;
+	    case -1:
+		printk(KERN_ALERT "FLASH: hardware error.  Firmware may not be not flashed\n");
+		break;
+	    case -3:
+		printk(KERN_ALERT "FLASH: image is corrupt or not correct for this platform.  Firmware not flashed\n");
+		break;
+	    case -4:
+		printk(KERN_ALERT "FLASH: flash failed when partially complete.  System may not reboot\n");
+		break;
+	    default:
+		printk(KERN_ALERT "FLASH: unknown flash return code %d\n", status);
+		break;
+	}
+}
+
 static void remove_flash_pde(struct proc_dir_entry *dp)
 {
 	if (dp) {
@@ -701,6 +808,7 @@ int __init rtas_flash_init(void)
 	if (rc != 0)
 		goto cleanup;
 
+	rtas_flash_term_hook = rtas_flash_firmware;
 	return 0;
 
 cleanup:
@@ -714,6 +822,7 @@ cleanup:
 
 void __exit rtas_flash_cleanup(void)
 {
+	rtas_flash_term_hook = NULL;
 	remove_flash_pde(firmware_flash_pde);
 	remove_flash_pde(firmware_update_pde);
 	remove_flash_pde(validate_pde);
diff --git a/arch/ppc64/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c
index 4a9719b48abe..60dec2401c26 100644
--- a/arch/ppc64/kernel/rtas_pci.c
+++ b/arch/powerpc/kernel/rtas_pci.c
@@ -5,19 +5,19 @@
  * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM
  *
  * RTAS specific routines for PCI.
- * 
+ *
  * Based on code from pci.c, chrp_pci.c and pSeries_pci.c
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *    
+ *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- * 
+ *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
@@ -38,9 +38,8 @@
 #include <asm/pci-bridge.h>
 #include <asm/iommu.h>
 #include <asm/rtas.h>
-
-#include "mpic.h"
-#include "pci.h"
+#include <asm/mpic.h>
+#include <asm/ppc-pci.h>
 
 /* RTAS tokens */
 static int read_pci_config;
@@ -48,7 +47,7 @@ static int write_pci_config;
 static int ibm_read_pci_config;
 static int ibm_write_pci_config;
 
-static int config_access_valid(struct pci_dn *dn, int where)
+static inline int config_access_valid(struct pci_dn *dn, int where)
 {
 	if (where < 256)
 		return 1;
@@ -73,16 +72,14 @@ static int of_device_available(struct device_node * dn)
         return 0;
 }
 
-static int rtas_read_config(struct device_node *dn, int where, int size, u32 *val)
+static int rtas_read_config(struct pci_dn *pdn, int where, int size, u32 *val)
 {
 	int returnval = -1;
 	unsigned long buid, addr;
 	int ret;
-	struct pci_dn *pdn;
 
-	if (!dn || !dn->data)
+	if (!pdn)
 		return PCIBIOS_DEVICE_NOT_FOUND;
-	pdn = dn->data;
 	if (!config_access_valid(pdn, where))
 		return PCIBIOS_BAD_REGISTER_NUMBER;
 
@@ -91,7 +88,7 @@ static int rtas_read_config(struct device_node *dn, int where, int size, u32 *va
 	buid = pdn->phb->buid;
 	if (buid) {
 		ret = rtas_call(ibm_read_pci_config, 4, 2, &returnval,
-				addr, buid >> 32, buid & 0xffffffff, size);
+				addr, BUID_HI(buid), BUID_LO(buid), size);
 	} else {
 		ret = rtas_call(read_pci_config, 2, 2, &returnval, addr, size);
 	}
@@ -101,7 +98,7 @@ static int rtas_read_config(struct device_node *dn, int where, int size, u32 *va
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	if (returnval == EEH_IO_ERROR_VALUE(size) &&
-	    eeh_dn_check_failure (dn, NULL))
+	    eeh_dn_check_failure (pdn->node, NULL))
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	return PCIBIOS_SUCCESSFUL;
@@ -119,23 +116,23 @@ static int rtas_pci_read_config(struct pci_bus *bus,
 		busdn = bus->sysdata;	/* must be a phb */
 
 	/* Search only direct children of the bus */
-	for (dn = busdn->child; dn; dn = dn->sibling)
-		if (dn->data && PCI_DN(dn)->devfn == devfn
+	for (dn = busdn->child; dn; dn = dn->sibling) {
+		struct pci_dn *pdn = PCI_DN(dn);
+		if (pdn && pdn->devfn == devfn
 		    && of_device_available(dn))
-			return rtas_read_config(dn, where, size, val);
+			return rtas_read_config(pdn, where, size, val);
+	}
 
 	return PCIBIOS_DEVICE_NOT_FOUND;
 }
 
-int rtas_write_config(struct device_node *dn, int where, int size, u32 val)
+int rtas_write_config(struct pci_dn *pdn, int where, int size, u32 val)
 {
 	unsigned long buid, addr;
 	int ret;
-	struct pci_dn *pdn;
 
-	if (!dn || !dn->data)
+	if (!pdn)
 		return PCIBIOS_DEVICE_NOT_FOUND;
-	pdn = dn->data;
 	if (!config_access_valid(pdn, where))
 		return PCIBIOS_BAD_REGISTER_NUMBER;
 
@@ -143,7 +140,8 @@ int rtas_write_config(struct device_node *dn, int where, int size, u32 val)
 		(pdn->devfn << 8) | (where & 0xff);
 	buid = pdn->phb->buid;
 	if (buid) {
-		ret = rtas_call(ibm_write_pci_config, 5, 1, NULL, addr, buid >> 32, buid & 0xffffffff, size, (ulong) val);
+		ret = rtas_call(ibm_write_pci_config, 5, 1, NULL, addr,
+			BUID_HI(buid), BUID_LO(buid), size, (ulong) val);
 	} else {
 		ret = rtas_call(write_pci_config, 3, 1, NULL, addr, size, (ulong)val);
 	}
@@ -166,10 +164,12 @@ static int rtas_pci_write_config(struct pci_bus *bus,
 		busdn = bus->sysdata;	/* must be a phb */
 
 	/* Search only direct children of the bus */
-	for (dn = busdn->child; dn; dn = dn->sibling)
-		if (dn->data && PCI_DN(dn)->devfn == devfn
+	for (dn = busdn->child; dn; dn = dn->sibling) {
+		struct pci_dn *pdn = PCI_DN(dn);
+		if (pdn && pdn->devfn == devfn
 		    && of_device_available(dn))
-			return rtas_write_config(dn, where, size, val);
+			return rtas_write_config(pdn, where, size, val);
+	}
 	return PCIBIOS_DEVICE_NOT_FOUND;
 }
 
@@ -222,7 +222,7 @@ static void python_countermeasures(struct device_node *dev,
 	/* Python's register file is 1 MB in size. */
 	chip_regs = ioremap(reg_struct.address & ~(0xfffffUL), 0x100000);
 
-	/* 
+	/*
 	 * Firmware doesn't always clear this bit which is critical
 	 * for good performance - Anton
 	 */
@@ -293,7 +293,7 @@ static int phb_set_bus_ranges(struct device_node *dev,
 	if (bus_range == NULL || len < 2 * sizeof(int)) {
 		return 1;
  	}
- 
+
 	phb->first_busno =  bus_range[0];
 	phb->last_busno  =  bus_range[1];
 
@@ -304,75 +304,18 @@ static int __devinit setup_phb(struct device_node *dev,
 			       struct pci_controller *phb,
 			       unsigned int addr_size_words)
 {
-	pci_setup_pci_controller(phb);
-
 	if (is_python(dev))
 		python_countermeasures(dev, addr_size_words);
 
 	if (phb_set_bus_ranges(dev, phb))
 		return 1;
 
-	phb->arch_data = dev;
 	phb->ops = &rtas_pci_ops;
 	phb->buid = get_phb_buid(dev);
 
 	return 0;
 }
 
-static void __devinit add_linux_pci_domain(struct device_node *dev,
-					   struct pci_controller *phb,
-					   struct property *of_prop)
-{
-	memset(of_prop, 0, sizeof(struct property));
-	of_prop->name = "linux,pci-domain";
-	of_prop->length = sizeof(phb->global_number);
-	of_prop->value = (unsigned char *)&of_prop[1];
-	memcpy(of_prop->value, &phb->global_number, sizeof(phb->global_number));
-	prom_add_property(dev, of_prop);
-}
-
-static struct pci_controller * __init alloc_phb(struct device_node *dev,
-						unsigned int addr_size_words)
-{
-	struct pci_controller *phb;
-	struct property *of_prop;
-
-	phb = alloc_bootmem(sizeof(struct pci_controller));
-	if (phb == NULL)
-		return NULL;
-
-	of_prop = alloc_bootmem(sizeof(struct property) +
-				sizeof(phb->global_number));
-	if (!of_prop)
-		return NULL;
-
-	if (setup_phb(dev, phb, addr_size_words))
-		return NULL;
-
-	add_linux_pci_domain(dev, phb, of_prop);
-
-	return phb;
-}
-
-static struct pci_controller * __devinit alloc_phb_dynamic(struct device_node *dev, unsigned int addr_size_words)
-{
-	struct pci_controller *phb;
-
-	phb = (struct pci_controller *)kmalloc(sizeof(struct pci_controller),
-					       GFP_KERNEL);
-	if (phb == NULL)
-		return NULL;
-
-	if (setup_phb(dev, phb, addr_size_words))
-		return NULL;
-
-	phb->is_dynamic = 1;
-
-	/* TODO: linux,pci-domain? */
-
- 	return phb;
-}
-
 unsigned long __init find_and_init_phbs(void)
 {
 	struct device_node *node;
@@ -397,11 +340,11 @@ unsigned long __init find_and_init_phbs(void)
 		if (node->type == NULL || strcmp(node->type, "pci") != 0)
 			continue;
 
-		phb = alloc_phb(node, root_size_cells);
+		phb = pcibios_alloc_controller(node);
 		if (!phb)
 			continue;
-
-		pci_process_bridge_OF_ranges(phb, node);
+		setup_phb(node, phb, root_size_cells);
+		pci_process_bridge_OF_ranges(phb, node, 0);
 		pci_setup_phb_io(phb, index == 0);
 #ifdef CONFIG_PPC_PSERIES
 		if (ppc64_interrupt_controller == IC_OPEN_PIC && pSeries_mpic) {
@@ -441,26 +384,22 @@ struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn)
 	struct device_node *root = of_find_node_by_path("/");
 	unsigned int root_size_cells = 0;
 	struct pci_controller *phb;
-	struct pci_bus *bus;
 	int primary;
 
 	root_size_cells = prom_n_size_cells(root);
 
 	primary = list_empty(&hose_list);
-	phb = alloc_phb_dynamic(dn, root_size_cells);
+	phb = pcibios_alloc_controller(dn);
 	if (!phb)
 		return NULL;
-
-	pci_process_bridge_OF_ranges(phb, dn);
+	setup_phb(dn, phb, root_size_cells);
+	pci_process_bridge_OF_ranges(phb, dn, primary);
 
 	pci_setup_phb_io_dynamic(phb, primary);
 	of_node_put(root);
 
 	pci_devs_phb_init_dynamic(phb);
-	phb->last_busno = 0xff;
-	bus = pci_scan_bus(phb->first_busno, phb->ops, phb->arch_data);
-	phb->bus = bus;
-	phb->last_busno = bus->subordinate;
+	scan_phb(phb);
 
 	return phb;
 }
@@ -509,8 +448,7 @@ int pcibios_remove_root_bus(struct pci_controller *phb)
 	}
 
 	list_del(&phb->list_node);
-	if (phb->is_dynamic)
-		kfree(phb);
+	pcibios_free_controller(phb);
 
 	return 0;
 }
diff --git a/arch/ppc64/kernel/semaphore.c b/arch/powerpc/kernel/semaphore.c
index a1c1db573e9c..2f8c3c951394 100644
--- a/arch/ppc64/kernel/semaphore.c
+++ b/arch/powerpc/kernel/semaphore.c
@@ -1,6 +1,4 @@
 /*
- * 
- *
  * PowerPC-specific semaphore code.
  *
  * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
@@ -42,6 +40,7 @@ static inline int __sem_update_count(struct semaphore *sem, int incr)
 "	srawi	%1,%0,31\n"
 "	andc	%1,%0,%1\n"
 "	add	%1,%1,%4\n"
+	PPC405_ERR77(0,%3)
 "	stwcx.	%1,0,%3\n"
 "	bne	1b"
 	: "=&r" (old_count), "=&r" (tmp), "=m" (sem->count)
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
new file mode 100644
index 000000000000..bd3eb4292b53
--- /dev/null
+++ b/arch/powerpc/kernel/setup-common.c
@@ -0,0 +1,591 @@
+/*
+ * Common boot and setup code for both 32-bit and 64-bit.
+ * Extracted from arch/powerpc/kernel/setup_64.c.
+ *
+ * Copyright (C) 2001 PPC64 Team, IBM Corp
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/delay.h>
+#include <linux/initrd.h>
+#include <linux/ide.h>
+#include <linux/seq_file.h>
+#include <linux/ioport.h>
+#include <linux/console.h>
+#include <linux/utsname.h>
+#include <linux/tty.h>
+#include <linux/root_dev.h>
+#include <linux/notifier.h>
+#include <linux/cpu.h>
+#include <linux/unistd.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/processor.h>
+#include <asm/vdso_datapage.h>
+#include <asm/pgtable.h>
+#include <asm/smp.h>
+#include <asm/elf.h>
+#include <asm/machdep.h>
+#include <asm/time.h>
+#include <asm/cputable.h>
+#include <asm/sections.h>
+#include <asm/btext.h>
+#include <asm/nvram.h>
+#include <asm/setup.h>
+#include <asm/system.h>
+#include <asm/rtas.h>
+#include <asm/iommu.h>
+#include <asm/serial.h>
+#include <asm/cache.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/lmb.h>
+#include <asm/xmon.h>
+
+#include "setup.h"
+
+#undef DEBUG
+
+#ifdef DEBUG
+#include <asm/udbg.h>
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+#ifdef CONFIG_PPC_MULTIPLATFORM
+int _machine = 0;
+EXPORT_SYMBOL(_machine);
+#endif
+
+unsigned long klimit = (unsigned long) _end;
+
+/*
+ * This still seems to be needed... -- paulus
+ */ 
+struct screen_info screen_info = {
+	.orig_x = 0,
+	.orig_y = 25,
+	.orig_video_cols = 80,
+	.orig_video_lines = 25,
+	.orig_video_isVGA = 1,
+	.orig_video_points = 16
+};
+
+#ifdef __DO_IRQ_CANON
+/* XXX should go elsewhere eventually */
+int ppc_do_canonicalize_irqs;
+EXPORT_SYMBOL(ppc_do_canonicalize_irqs);
+#endif
+
+/* also used by kexec */
+void machine_shutdown(void)
+{
+	if (ppc_md.nvram_sync)
+		ppc_md.nvram_sync();
+}
+
+void machine_restart(char *cmd)
+{
+	machine_shutdown();
+	ppc_md.restart(cmd);
+#ifdef CONFIG_SMP
+	smp_send_stop();
+#endif
+	printk(KERN_EMERG "System Halted, OK to turn off power\n");
+	local_irq_disable();
+	while (1) ;
+}
+
+void machine_power_off(void)
+{
+	machine_shutdown();
+	ppc_md.power_off();
+#ifdef CONFIG_SMP
+	smp_send_stop();
+#endif
+	printk(KERN_EMERG "System Halted, OK to turn off power\n");
+	local_irq_disable();
+	while (1) ;
+}
+/* Used by the G5 thermal driver */
+EXPORT_SYMBOL_GPL(machine_power_off);
+
+void (*pm_power_off)(void) = machine_power_off;
+EXPORT_SYMBOL_GPL(pm_power_off);
+
+void machine_halt(void)
+{
+	machine_shutdown();
+	ppc_md.halt();
+#ifdef CONFIG_SMP
+	smp_send_stop();
+#endif
+	printk(KERN_EMERG "System Halted, OK to turn off power\n");
+	local_irq_disable();
+	while (1) ;
+}
+
+
+#ifdef CONFIG_TAU
+extern u32 cpu_temp(unsigned long cpu);
+extern u32 cpu_temp_both(unsigned long cpu);
+#endif /* CONFIG_TAU */
+
+#ifdef CONFIG_SMP
+DEFINE_PER_CPU(unsigned int, pvr);
+#endif
+
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+	unsigned long cpu_id = (unsigned long)v - 1;
+	unsigned int pvr;
+	unsigned short maj;
+	unsigned short min;
+
+	if (cpu_id == NR_CPUS) {
+#if defined(CONFIG_SMP) && defined(CONFIG_PPC32)
+		unsigned long bogosum = 0;
+		int i;
+		for (i = 0; i < NR_CPUS; ++i)
+			if (cpu_online(i))
+				bogosum += loops_per_jiffy;
+		seq_printf(m, "total bogomips\t: %lu.%02lu\n",
+			   bogosum/(500000/HZ), bogosum/(5000/HZ) % 100);
+#endif /* CONFIG_SMP && CONFIG_PPC32 */
+		seq_printf(m, "timebase\t: %lu\n", ppc_tb_freq);
+
+		if (ppc_md.show_cpuinfo != NULL)
+			ppc_md.show_cpuinfo(m);
+
+		return 0;
+	}
+
+	/* We only show online cpus: disable preempt (overzealous, I
+	 * knew) to prevent cpu going down. */
+	preempt_disable();
+	if (!cpu_online(cpu_id)) {
+		preempt_enable();
+		return 0;
+	}
+
+#ifdef CONFIG_SMP
+	pvr = per_cpu(pvr, cpu_id);
+#else
+	pvr = mfspr(SPRN_PVR);
+#endif
+	maj = (pvr >> 8) & 0xFF;
+	min = pvr & 0xFF;
+
+	seq_printf(m, "processor\t: %lu\n", cpu_id);
+	seq_printf(m, "cpu\t\t: ");
+
+	if (cur_cpu_spec->pvr_mask)
+		seq_printf(m, "%s", cur_cpu_spec->cpu_name);
+	else
+		seq_printf(m, "unknown (%08x)", pvr);
+
+#ifdef CONFIG_ALTIVEC
+	if (cpu_has_feature(CPU_FTR_ALTIVEC))
+		seq_printf(m, ", altivec supported");
+#endif /* CONFIG_ALTIVEC */
+
+	seq_printf(m, "\n");
+
+#ifdef CONFIG_TAU
+	if (cur_cpu_spec->cpu_features & CPU_FTR_TAU) {
+#ifdef CONFIG_TAU_AVERAGE
+		/* more straightforward, but potentially misleading */
+		seq_printf(m,  "temperature \t: %u C (uncalibrated)\n",
+			   cpu_temp(cpu_id));
+#else
+		/* show the actual temp sensor range */
+		u32 temp;
+		temp = cpu_temp_both(cpu_id);
+		seq_printf(m, "temperature \t: %u-%u C (uncalibrated)\n",
+			   temp & 0xff, temp >> 16);
+#endif
+	}
+#endif /* CONFIG_TAU */
+
+	/*
+	 * Assume here that all clock rates are the same in a
+	 * smp system.  -- Cort
+	 */
+	if (ppc_proc_freq)
+		seq_printf(m, "clock\t\t: %lu.%06luMHz\n",
+			   ppc_proc_freq / 1000000, ppc_proc_freq % 1000000);
+
+	if (ppc_md.show_percpuinfo != NULL)
+		ppc_md.show_percpuinfo(m, cpu_id);
+
+	/* If we are a Freescale core do a simple check so
+	 * we dont have to keep adding cases in the future */
+	if (PVR_VER(pvr) & 0x8000) {
+		maj = PVR_MAJ(pvr);
+		min = PVR_MIN(pvr);
+	} else {
+		switch (PVR_VER(pvr)) {
+			case 0x0020:	/* 403 family */
+				maj = PVR_MAJ(pvr) + 1;
+				min = PVR_MIN(pvr);
+				break;
+			case 0x1008:	/* 740P/750P ?? */
+				maj = ((pvr >> 8) & 0xFF) - 1;
+				min = pvr & 0xFF;
+				break;
+			default:
+				maj = (pvr >> 8) & 0xFF;
+				min = pvr & 0xFF;
+				break;
+		}
+	}
+
+	seq_printf(m, "revision\t: %hd.%hd (pvr %04x %04x)\n",
+		   maj, min, PVR_VER(pvr), PVR_REV(pvr));
+
+#ifdef CONFIG_PPC32
+	seq_printf(m, "bogomips\t: %lu.%02lu\n",
+		   loops_per_jiffy / (500000/HZ),
+		   (loops_per_jiffy / (5000/HZ)) % 100);
+#endif
+
+#ifdef CONFIG_SMP
+	seq_printf(m, "\n");
+#endif
+
+	preempt_enable();
+	return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+	unsigned long i = *pos;
+
+	return i <= NR_CPUS ? (void *)(i + 1) : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	++*pos;
+	return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+struct seq_operations cpuinfo_op = {
+	.start =c_start,
+	.next =	c_next,
+	.stop =	c_stop,
+	.show =	show_cpuinfo,
+};
+
+#ifdef CONFIG_PPC_MULTIPLATFORM
+static int __init set_preferred_console(void)
+{
+	struct device_node *prom_stdout = NULL;
+	char *name;
+	u32 *spd;
+	int offset = 0;
+
+	DBG(" -> set_preferred_console()\n");
+
+	/* The user has requested a console so this is already set up. */
+	if (strstr(saved_command_line, "console=")) {
+		DBG(" console was specified !\n");
+		return -EBUSY;
+	}
+
+	if (!of_chosen) {
+		DBG(" of_chosen is NULL !\n");
+		return -ENODEV;
+	}
+	/* We are getting a weird phandle from OF ... */
+	/* ... So use the full path instead */
+	name = (char *)get_property(of_chosen, "linux,stdout-path", NULL);
+	if (name == NULL) {
+		DBG(" no linux,stdout-path !\n");
+		return -ENODEV;
+	}
+	prom_stdout = of_find_node_by_path(name);
+	if (!prom_stdout) {
+		DBG(" can't find stdout package %s !\n", name);
+		return -ENODEV;
+	}	
+	DBG("stdout is %s\n", prom_stdout->full_name);
+
+	name = (char *)get_property(prom_stdout, "name", NULL);
+	if (!name) {
+		DBG(" stdout package has no name !\n");
+		goto not_found;
+	}
+	spd = (u32 *)get_property(prom_stdout, "current-speed", NULL);
+
+	if (0)
+		;
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+	else if (strcmp(name, "serial") == 0) {
+		int i;
+		u32 *reg = (u32 *)get_property(prom_stdout, "reg", &i);
+		if (i > 8) {
+			switch (reg[1]) {
+				case 0x3f8:
+					offset = 0;
+					break;
+				case 0x2f8:
+					offset = 1;
+					break;
+				case 0x898:
+					offset = 2;
+					break;
+				case 0x890:
+					offset = 3;
+					break;
+				default:
+					/* We dont recognise the serial port */
+					goto not_found;
+			}
+		}
+	}
+#endif /* CONFIG_SERIAL_8250_CONSOLE */
+#ifdef CONFIG_PPC_PSERIES
+	else if (strcmp(name, "vty") == 0) {
+ 		u32 *reg = (u32 *)get_property(prom_stdout, "reg", NULL);
+ 		char *compat = (char *)get_property(prom_stdout, "compatible", NULL);
+
+ 		if (reg && compat && (strcmp(compat, "hvterm-protocol") == 0)) {
+ 			/* Host Virtual Serial Interface */
+ 			switch (reg[0]) {
+ 				case 0x30000000:
+ 					offset = 0;
+ 					break;
+ 				case 0x30000001:
+ 					offset = 1;
+ 					break;
+ 				default:
+					goto not_found;
+ 			}
+			of_node_put(prom_stdout);
+			DBG("Found hvsi console at offset %d\n", offset);
+ 			return add_preferred_console("hvsi", offset, NULL);
+ 		} else {
+ 			/* pSeries LPAR virtual console */
+			of_node_put(prom_stdout);
+			DBG("Found hvc console\n");
+ 			return add_preferred_console("hvc", 0, NULL);
+ 		}
+	}
+#endif /* CONFIG_PPC_PSERIES */
+#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
+	else if (strcmp(name, "ch-a") == 0)
+		offset = 0;
+	else if (strcmp(name, "ch-b") == 0)
+		offset = 1;
+#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
+	else
+		goto not_found;
+	of_node_put(prom_stdout);
+
+	DBG("Found serial console at ttyS%d\n", offset);
+
+	if (spd) {
+		static char __initdata opt[16];
+		sprintf(opt, "%d", *spd);
+		return add_preferred_console("ttyS", offset, opt);
+	} else
+		return add_preferred_console("ttyS", offset, NULL);
+
+ not_found:
+	DBG("No preferred console found !\n");
+	of_node_put(prom_stdout);
+	return -ENODEV;
+}
+console_initcall(set_preferred_console);
+#endif /* CONFIG_PPC_MULTIPLATFORM */
+
+void __init check_for_initrd(void)
+{
+#ifdef CONFIG_BLK_DEV_INITRD
+	unsigned long *prop;
+
+	DBG(" -> check_for_initrd()\n");
+
+	if (of_chosen) {
+		prop = (unsigned long *)get_property(of_chosen,
+				"linux,initrd-start", NULL);
+		if (prop != NULL) {
+			initrd_start = (unsigned long)__va(*prop);
+			prop = (unsigned long *)get_property(of_chosen,
+					"linux,initrd-end", NULL);
+			if (prop != NULL) {
+				initrd_end = (unsigned long)__va(*prop);
+				initrd_below_start_ok = 1;
+			} else
+				initrd_start = 0;
+		}
+	}
+
+	/* If we were passed an initrd, set the ROOT_DEV properly if the values
+	 * look sensible. If not, clear initrd reference.
+	 */
+	if (initrd_start >= KERNELBASE && initrd_end >= KERNELBASE &&
+	    initrd_end > initrd_start)
+		ROOT_DEV = Root_RAM0;
+	else
+		initrd_start = initrd_end = 0;
+
+	if (initrd_start)
+		printk("Found initrd at 0x%lx:0x%lx\n", initrd_start, initrd_end);
+
+	DBG(" <- check_for_initrd()\n");
+#endif /* CONFIG_BLK_DEV_INITRD */
+}
+
+#ifdef CONFIG_SMP
+
+/**
+ * setup_cpu_maps - initialize the following cpu maps:
+ *                  cpu_possible_map
+ *                  cpu_present_map
+ *                  cpu_sibling_map
+ *
+ * Having the possible map set up early allows us to restrict allocations
+ * of things like irqstacks to num_possible_cpus() rather than NR_CPUS.
+ *
+ * We do not initialize the online map here; cpus set their own bits in
+ * cpu_online_map as they come up.
+ *
+ * This function is valid only for Open Firmware systems.  finish_device_tree
+ * must be called before using this.
+ *
+ * While we're here, we may as well set the "physical" cpu ids in the paca.
+ */
+void __init smp_setup_cpu_maps(void)
+{
+	struct device_node *dn = NULL;
+	int cpu = 0;
+	int swap_cpuid = 0;
+
+	while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < NR_CPUS) {
+		int *intserv;
+		int j, len = sizeof(u32), nthreads = 1;
+
+		intserv = (int *)get_property(dn, "ibm,ppc-interrupt-server#s",
+					      &len);
+		if (intserv)
+			nthreads = len / sizeof(int);
+		else {
+			intserv = (int *) get_property(dn, "reg", NULL);
+			if (!intserv)
+				intserv = &cpu;	/* assume logical == phys */
+		}
+
+		for (j = 0; j < nthreads && cpu < NR_CPUS; j++) {
+			cpu_set(cpu, cpu_present_map);
+			set_hard_smp_processor_id(cpu, intserv[j]);
+
+			if (intserv[j] == boot_cpuid_phys)
+				swap_cpuid = cpu;
+			cpu_set(cpu, cpu_possible_map);
+			cpu++;
+		}
+	}
+
+	/* Swap CPU id 0 with boot_cpuid_phys, so we can always assume that
+	 * boot cpu is logical 0.
+	 */
+	if (boot_cpuid_phys != get_hard_smp_processor_id(0)) {
+		u32 tmp;
+		tmp = get_hard_smp_processor_id(0);
+		set_hard_smp_processor_id(0, boot_cpuid_phys);
+		set_hard_smp_processor_id(swap_cpuid, tmp);
+	}
+
+#ifdef CONFIG_PPC64
+	/*
+	 * On pSeries LPAR, we need to know how many cpus
+	 * could possibly be added to this partition.
+	 */
+	if (_machine == PLATFORM_PSERIES_LPAR &&
+	    (dn = of_find_node_by_path("/rtas"))) {
+		int num_addr_cell, num_size_cell, maxcpus;
+		unsigned int *ireg;
+
+		num_addr_cell = prom_n_addr_cells(dn);
+		num_size_cell = prom_n_size_cells(dn);
+
+		ireg = (unsigned int *)
+			get_property(dn, "ibm,lrdr-capacity", NULL);
+
+		if (!ireg)
+			goto out;
+
+		maxcpus = ireg[num_addr_cell + num_size_cell];
+
+		/* Double maxcpus for processors which have SMT capability */
+		if (cpu_has_feature(CPU_FTR_SMT))
+			maxcpus *= 2;
+
+		if (maxcpus > NR_CPUS) {
+			printk(KERN_WARNING
+			       "Partition configured for %d cpus, "
+			       "operating system maximum is %d.\n",
+			       maxcpus, NR_CPUS);
+			maxcpus = NR_CPUS;
+		} else
+			printk(KERN_INFO "Partition configured for %d cpus.\n",
+			       maxcpus);
+
+		for (cpu = 0; cpu < maxcpus; cpu++)
+			cpu_set(cpu, cpu_possible_map);
+	out:
+		of_node_put(dn);
+	}
+
+	/*
+	 * Do the sibling map; assume only two threads per processor.
+	 */
+	for_each_cpu(cpu) {
+		cpu_set(cpu, cpu_sibling_map[cpu]);
+		if (cpu_has_feature(CPU_FTR_SMT))
+			cpu_set(cpu ^ 0x1, cpu_sibling_map[cpu]);
+	}
+
+	vdso_data->processorCount = num_present_cpus();
+#endif /* CONFIG_PPC64 */
+}
+#endif /* CONFIG_SMP */
+
+#ifdef CONFIG_XMON
+static int __init early_xmon(char *p)
+{
+	/* ensure xmon is enabled */
+	if (p) {
+		if (strncmp(p, "on", 2) == 0)
+			xmon_init(1);
+		if (strncmp(p, "off", 3) == 0)
+			xmon_init(0);
+		if (strncmp(p, "early", 5) != 0)
+			return 0;
+	}
+	xmon_init(1);
+	debugger(NULL);
+
+	return 0;
+}
+early_param("xmon", early_xmon);
+#endif
diff --git a/arch/powerpc/kernel/setup.h b/arch/powerpc/kernel/setup.h
new file mode 100644
index 000000000000..2ebba755272e
--- /dev/null
+++ b/arch/powerpc/kernel/setup.h
@@ -0,0 +1,6 @@
+#ifndef _POWERPC_KERNEL_SETUP_H
+#define _POWERPC_KERNEL_SETUP_H
+
+void check_for_initrd(void);
+
+#endif /* _POWERPC_KERNEL_SETUP_H */
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
new file mode 100644
index 000000000000..e5694335bf10
--- /dev/null
+++ b/arch/powerpc/kernel/setup_32.c
@@ -0,0 +1,365 @@
+/*
+ * Common prep/pmac/chrp boot and setup code.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/delay.h>
+#include <linux/initrd.h>
+#include <linux/ide.h>
+#include <linux/tty.h>
+#include <linux/bootmem.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/cpu.h>
+#include <linux/console.h>
+
+#include <asm/residual.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/processor.h>
+#include <asm/pgtable.h>
+#include <asm/setup.h>
+#include <asm/amigappc.h>
+#include <asm/smp.h>
+#include <asm/elf.h>
+#include <asm/cputable.h>
+#include <asm/bootx.h>
+#include <asm/btext.h>
+#include <asm/machdep.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/pmac_feature.h>
+#include <asm/sections.h>
+#include <asm/nvram.h>
+#include <asm/xmon.h>
+#include <asm/time.h>
+
+#include "setup.h"
+
+#define DBG(fmt...)
+
+#if defined CONFIG_KGDB
+#include <asm/kgdb.h>
+#endif
+
+extern void platform_init(void);
+extern void bootx_init(unsigned long r4, unsigned long phys);
+
+extern void ppc6xx_idle(void);
+extern void power4_idle(void);
+
+boot_infos_t *boot_infos;
+struct ide_machdep_calls ppc_ide_md;
+
+int boot_cpuid;
+EXPORT_SYMBOL_GPL(boot_cpuid);
+int boot_cpuid_phys;
+
+unsigned long ISA_DMA_THRESHOLD;
+unsigned int DMA_MODE_READ;
+unsigned int DMA_MODE_WRITE;
+
+int have_of = 1;
+
+#ifdef CONFIG_PPC_MULTIPLATFORM
+extern void prep_init(void);
+extern void pmac_init(void);
+extern void chrp_init(void);
+
+dev_t boot_dev;
+#endif /* CONFIG_PPC_MULTIPLATFORM */
+
+#ifdef CONFIG_MAGIC_SYSRQ
+unsigned long SYSRQ_KEY = 0x54;
+#endif /* CONFIG_MAGIC_SYSRQ */
+
+#ifdef CONFIG_VGA_CONSOLE
+unsigned long vgacon_remap_base;
+#endif
+
+struct machdep_calls ppc_md;
+EXPORT_SYMBOL(ppc_md);
+
+/*
+ * These are used in binfmt_elf.c to put aux entries on the stack
+ * for each elf executable being started.
+ */
+int dcache_bsize;
+int icache_bsize;
+int ucache_bsize;
+
+/*
+ * We're called here very early in the boot.  We determine the machine
+ * type and call the appropriate low-level setup functions.
+ *  -- Cort <cort@fsmlabs.com>
+ *
+ * Note that the kernel may be running at an address which is different
+ * from the address that it was linked at, so we must use RELOC/PTRRELOC
+ * to access static data (including strings).  -- paulus
+ */
+unsigned long __init early_init(unsigned long dt_ptr)
+{
+	unsigned long offset = reloc_offset();
+
+	/* First zero the BSS -- use memset_io, some platforms don't have
+	 * caches on yet */
+	memset_io(PTRRELOC(&__bss_start), 0, _end - __bss_start);
+
+	/*
+	 * Identify the CPU type and fix up code sections
+	 * that depend on which cpu we have.
+	 */
+	identify_cpu(offset, 0);
+	do_cpu_ftr_fixups(offset);
+
+	return KERNELBASE + offset;
+}
+
+#ifdef CONFIG_PPC_MULTIPLATFORM
+/*
+ * The PPC_MULTIPLATFORM version of platform_init...
+ */
+void __init platform_init(void)
+{
+	/* if we didn't get any bootinfo telling us what we are... */
+	if (_machine == 0) {
+		/* prep boot loader tells us if we're prep or not */
+		if ( *(unsigned long *)(KERNELBASE) == (0xdeadc0de) )
+			_machine = _MACH_prep;
+	}
+
+#ifdef CONFIG_PPC_PREP
+	/* not much more to do here, if prep */
+	if (_machine == _MACH_prep) {
+		prep_init();
+		return;
+	}
+#endif
+
+#ifdef CONFIG_ADB
+	if (strstr(cmd_line, "adb_sync")) {
+		extern int __adb_probe_sync;
+		__adb_probe_sync = 1;
+	}
+#endif /* CONFIG_ADB */
+
+	switch (_machine) {
+#ifdef CONFIG_PPC_PMAC
+	case _MACH_Pmac:
+		pmac_init();
+		break;
+#endif
+#ifdef CONFIG_PPC_CHRP
+	case _MACH_chrp:
+		chrp_init();
+		break;
+#endif
+	}
+}
+#endif
+
+/*
+ * Find out what kind of machine we're on and save any data we need
+ * from the early boot process (devtree is copied on pmac by prom_init()).
+ * This is called very early on the boot process, after a minimal
+ * MMU environment has been set up but before MMU_init is called.
+ */
+void __init machine_init(unsigned long dt_ptr, unsigned long phys)
+{
+	early_init_devtree(__va(dt_ptr));
+
+#ifdef CONFIG_CMDLINE
+	strlcpy(cmd_line, CONFIG_CMDLINE, sizeof(cmd_line));
+#endif /* CONFIG_CMDLINE */
+
+	platform_init();
+
+#ifdef CONFIG_6xx
+	ppc_md.power_save = ppc6xx_idle;
+#endif
+
+	if (ppc_md.progress)
+		ppc_md.progress("id mach(): done", 0x200);
+}
+
+#ifdef CONFIG_BOOKE_WDT
+/* Checks wdt=x and wdt_period=xx command-line option */
+int __init early_parse_wdt(char *p)
+{
+	if (p && strncmp(p, "0", 1) != 0)
+	       booke_wdt_enabled = 1;
+
+	return 0;
+}
+early_param("wdt", early_parse_wdt);
+
+int __init early_parse_wdt_period (char *p)
+{
+	if (p)
+		booke_wdt_period = simple_strtoul(p, NULL, 0);
+
+	return 0;
+}
+early_param("wdt_period", early_parse_wdt_period);
+#endif	/* CONFIG_BOOKE_WDT */
+
+/* Checks "l2cr=xxxx" command-line option */
+int __init ppc_setup_l2cr(char *str)
+{
+	if (cpu_has_feature(CPU_FTR_L2CR)) {
+		unsigned long val = simple_strtoul(str, NULL, 0);
+		printk(KERN_INFO "l2cr set to %lx\n", val);
+		_set_L2CR(0);		/* force invalidate by disable cache */
+		_set_L2CR(val);		/* and enable it */
+	}
+	return 1;
+}
+__setup("l2cr=", ppc_setup_l2cr);
+
+#ifdef CONFIG_GENERIC_NVRAM
+
+/* Generic nvram hooks used by drivers/char/gen_nvram.c */
+unsigned char nvram_read_byte(int addr)
+{
+	if (ppc_md.nvram_read_val)
+		return ppc_md.nvram_read_val(addr);
+	return 0xff;
+}
+EXPORT_SYMBOL(nvram_read_byte);
+
+void nvram_write_byte(unsigned char val, int addr)
+{
+	if (ppc_md.nvram_write_val)
+		ppc_md.nvram_write_val(addr, val);
+}
+EXPORT_SYMBOL(nvram_write_byte);
+
+void nvram_sync(void)
+{
+	if (ppc_md.nvram_sync)
+		ppc_md.nvram_sync();
+}
+EXPORT_SYMBOL(nvram_sync);
+
+#endif /* CONFIG_NVRAM */
+
+static struct cpu cpu_devices[NR_CPUS];
+
+int __init ppc_init(void)
+{
+	int i;
+
+	/* clear the progress line */
+	if ( ppc_md.progress ) ppc_md.progress("             ", 0xffff);
+
+	/* register CPU devices */
+	for (i = 0; i < NR_CPUS; i++)
+		if (cpu_possible(i))
+			register_cpu(&cpu_devices[i], i, NULL);
+
+	/* call platform init */
+	if (ppc_md.init != NULL) {
+		ppc_md.init();
+	}
+	return 0;
+}
+
+arch_initcall(ppc_init);
+
+/* Warning, IO base is not yet inited */
+void __init setup_arch(char **cmdline_p)
+{
+	extern void do_init_bootmem(void);
+
+	/* so udelay does something sensible, assume <= 1000 bogomips */
+	loops_per_jiffy = 500000000 / HZ;
+
+	unflatten_device_tree();
+	check_for_initrd();
+	finish_device_tree();
+
+	smp_setup_cpu_maps();
+
+#ifdef CONFIG_BOOTX_TEXT
+	init_boot_display();
+#endif
+
+#ifdef CONFIG_PPC_PMAC
+	/* This could be called "early setup arch", it must be done
+	 * now because xmon need it
+	 */
+	if (_machine == _MACH_Pmac)
+		pmac_feature_init();	/* New cool way */
+#endif
+
+#ifdef CONFIG_XMON_DEFAULT
+	xmon_init(1);
+#endif
+
+#if defined(CONFIG_KGDB)
+	if (ppc_md.kgdb_map_scc)
+		ppc_md.kgdb_map_scc();
+	set_debug_traps();
+	if (strstr(cmd_line, "gdb")) {
+		if (ppc_md.progress)
+			ppc_md.progress("setup_arch: kgdb breakpoint", 0x4000);
+		printk("kgdb breakpoint activated\n");
+		breakpoint();
+	}
+#endif
+
+	/*
+	 * Set cache line size based on type of cpu as a default.
+	 * Systems with OF can look in the properties on the cpu node(s)
+	 * for a possibly more accurate value.
+	 */
+	if (cpu_has_feature(CPU_FTR_SPLIT_ID_CACHE)) {
+		dcache_bsize = cur_cpu_spec->dcache_bsize;
+		icache_bsize = cur_cpu_spec->icache_bsize;
+		ucache_bsize = 0;
+	} else
+		ucache_bsize = dcache_bsize = icache_bsize
+			= cur_cpu_spec->dcache_bsize;
+
+	/* reboot on panic */
+	panic_timeout = 180;
+
+	init_mm.start_code = PAGE_OFFSET;
+	init_mm.end_code = (unsigned long) _etext;
+	init_mm.end_data = (unsigned long) _edata;
+	init_mm.brk = klimit;
+
+	/* Save unparsed command line copy for /proc/cmdline */
+	strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE);
+	*cmdline_p = cmd_line;
+
+	parse_early_param();
+
+	/* set up the bootmem stuff with available memory */
+	do_init_bootmem();
+	if ( ppc_md.progress ) ppc_md.progress("setup_arch: bootmem", 0x3eab);
+
+#ifdef CONFIG_PPC_OCP
+	/* Initialize OCP device list */
+	ocp_early_init();
+	if ( ppc_md.progress ) ppc_md.progress("ocp: exit", 0x3eab);
+#endif
+
+#ifdef CONFIG_DUMMY_CONSOLE
+	conswitchp = &dummy_con;
+#endif
+
+	ppc_md.setup_arch();
+	if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab);
+
+	paging_init();
+
+	/* this is for modules since _machine can be a define -- Cort */
+	ppc_md.ppc_machine = _machine;
+}
diff --git a/arch/ppc64/kernel/setup.c b/arch/powerpc/kernel/setup_64.c
index 5ac48bd64891..608fee7c7e20 100644
--- a/arch/ppc64/kernel/setup.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -37,12 +37,10 @@
 #include <asm/prom.h>
 #include <asm/processor.h>
 #include <asm/pgtable.h>
-#include <asm/bootinfo.h>
 #include <asm/smp.h>
 #include <asm/elf.h>
 #include <asm/machdep.h>
 #include <asm/paca.h>
-#include <asm/ppcdebug.h>
 #include <asm/time.h>
 #include <asm/cputable.h>
 #include <asm/sections.h>
@@ -57,7 +55,13 @@
 #include <asm/page.h>
 #include <asm/mmu.h>
 #include <asm/lmb.h>
-#include <asm/iSeries/ItLpNaca.h>
+#include <asm/iseries/it_lp_naca.h>
+#include <asm/firmware.h>
+#include <asm/xmon.h>
+#include <asm/udbg.h>
+#include <asm/kexec.h>
+
+#include "setup.h"
 
 #ifdef DEBUG
 #define DBG(fmt...) udbg_printf(fmt)
@@ -92,17 +96,6 @@ extern void udbg_init_maple_realmode(void);
 	do { udbg_putc = call_rtas_display_status_delay; } while(0)
 #endif
 
-/* extern void *stab; */
-extern unsigned long klimit;
-
-extern void mm_init_ppc64(void);
-extern void stab_initialize(unsigned long stab);
-extern void htab_initialize(void);
-extern void early_init_devtree(void *flat_dt);
-extern void unflatten_device_tree(void);
-
-extern void smp_release_cpus(void);
-
 int have_of = 1;
 int boot_cpuid = 0;
 int boot_cpuid_phys = 0;
@@ -136,24 +129,7 @@ static struct notifier_block ppc64_panic_block = {
 	.priority = INT_MIN /* may not return; must be done last */
 };
 
-/*
- * Perhaps we can put the pmac screen_info[] here
- * on pmac as well so we don't need the ifdef's.
- * Until we get multiple-console support in here
- * that is.  -- Cort
- * Maybe tie it to serial consoles, since this is really what
- * these processors use on existing boards.  -- Dan
- */ 
-struct screen_info screen_info = {
-	.orig_x = 0,
-	.orig_y = 25,
-	.orig_video_cols = 80,
-	.orig_video_lines = 25,
-	.orig_video_isVGA = 1,
-	.orig_video_points = 16
-};
-
-#if defined(CONFIG_PPC_MULTIPLATFORM) && defined(CONFIG_SMP)
+#ifdef CONFIG_SMP
 
 static int smt_enabled_cmdline;
 
@@ -198,123 +174,15 @@ static int __init early_smt_enabled(char *p)
 }
 early_param("smt-enabled", early_smt_enabled);
 
-/**
- * setup_cpu_maps - initialize the following cpu maps:
- *                  cpu_possible_map
- *                  cpu_present_map
- *                  cpu_sibling_map
- *
- * Having the possible map set up early allows us to restrict allocations
- * of things like irqstacks to num_possible_cpus() rather than NR_CPUS.
- *
- * We do not initialize the online map here; cpus set their own bits in
- * cpu_online_map as they come up.
- *
- * This function is valid only for Open Firmware systems.  finish_device_tree
- * must be called before using this.
- *
- * While we're here, we may as well set the "physical" cpu ids in the paca.
- */
-static void __init setup_cpu_maps(void)
-{
-	struct device_node *dn = NULL;
-	int cpu = 0;
-	int swap_cpuid = 0;
-
-	check_smt_enabled();
-
-	while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < NR_CPUS) {
-		u32 *intserv;
-		int j, len = sizeof(u32), nthreads;
-
-		intserv = (u32 *)get_property(dn, "ibm,ppc-interrupt-server#s",
-					      &len);
-		if (!intserv)
-			intserv = (u32 *)get_property(dn, "reg", NULL);
-
-		nthreads = len / sizeof(u32);
-
-		for (j = 0; j < nthreads && cpu < NR_CPUS; j++) {
-			cpu_set(cpu, cpu_present_map);
-			set_hard_smp_processor_id(cpu, intserv[j]);
-
-			if (intserv[j] == boot_cpuid_phys)
-				swap_cpuid = cpu;
-			cpu_set(cpu, cpu_possible_map);
-			cpu++;
-		}
-	}
-
-	/* Swap CPU id 0 with boot_cpuid_phys, so we can always assume that
-	 * boot cpu is logical 0.
-	 */
-	if (boot_cpuid_phys != get_hard_smp_processor_id(0)) {
-		u32 tmp;
-		tmp = get_hard_smp_processor_id(0);
-		set_hard_smp_processor_id(0, boot_cpuid_phys);
-		set_hard_smp_processor_id(swap_cpuid, tmp);
-	}
-
-	/*
-	 * On pSeries LPAR, we need to know how many cpus
-	 * could possibly be added to this partition.
-	 */
-	if (systemcfg->platform == PLATFORM_PSERIES_LPAR &&
-				(dn = of_find_node_by_path("/rtas"))) {
-		int num_addr_cell, num_size_cell, maxcpus;
-		unsigned int *ireg;
-
-		num_addr_cell = prom_n_addr_cells(dn);
-		num_size_cell = prom_n_size_cells(dn);
-
-		ireg = (unsigned int *)
-			get_property(dn, "ibm,lrdr-capacity", NULL);
-
-		if (!ireg)
-			goto out;
-
-		maxcpus = ireg[num_addr_cell + num_size_cell];
-
-		/* Double maxcpus for processors which have SMT capability */
-		if (cpu_has_feature(CPU_FTR_SMT))
-			maxcpus *= 2;
-
-		if (maxcpus > NR_CPUS) {
-			printk(KERN_WARNING
-			       "Partition configured for %d cpus, "
-			       "operating system maximum is %d.\n",
-			       maxcpus, NR_CPUS);
-			maxcpus = NR_CPUS;
-		} else
-			printk(KERN_INFO "Partition configured for %d cpus.\n",
-			       maxcpus);
-
-		for (cpu = 0; cpu < maxcpus; cpu++)
-			cpu_set(cpu, cpu_possible_map);
-	out:
-		of_node_put(dn);
-	}
-
-	/*
-	 * Do the sibling map; assume only two threads per processor.
-	 */
-	for_each_cpu(cpu) {
-		cpu_set(cpu, cpu_sibling_map[cpu]);
-		if (cpu_has_feature(CPU_FTR_SMT))
-			cpu_set(cpu ^ 0x1, cpu_sibling_map[cpu]);
-	}
-
-	systemcfg->processorCount = num_present_cpus();
-}
-#endif /* defined(CONFIG_PPC_MULTIPLATFORM) && defined(CONFIG_SMP) */
-
-
-#ifdef CONFIG_PPC_MULTIPLATFORM
+#else
+#define check_smt_enabled()
+#endif /* CONFIG_SMP */
 
 extern struct machdep_calls pSeries_md;
 extern struct machdep_calls pmac_md;
 extern struct machdep_calls maple_md;
-extern struct machdep_calls bpa_md;
+extern struct machdep_calls cell_md;
+extern struct machdep_calls iseries_md;
 
 /* Ultimately, stuff them in an elf section like initcalls... */
 static struct machdep_calls __initdata *machines[] = {
@@ -327,8 +195,11 @@ static struct machdep_calls __initdata *machines[] = {
 #ifdef CONFIG_PPC_MAPLE
 	&maple_md,
 #endif /* CONFIG_PPC_MAPLE */
-#ifdef CONFIG_PPC_BPA
-	&bpa_md,
+#ifdef CONFIG_PPC_CELL
+	&cell_md,
+#endif
+#ifdef CONFIG_PPC_ISERIES
+	&iseries_md,
 #endif
 	NULL
 };
@@ -366,12 +237,6 @@ void __init early_setup(unsigned long dt_ptr)
 	DBG(" -> early_setup()\n");
 
 	/*
-	 * Fill the default DBG level (do we want to keep
-	 * that old mecanism around forever ?)
-	 */
-	ppcdbg_initialize();
-
-	/*
 	 * Do early initializations using the flattened device
 	 * tree, like retreiving the physical memory map or
 	 * calculating/retreiving the hash table size
@@ -382,11 +247,10 @@ void __init early_setup(unsigned long dt_ptr)
 	 * Iterate all ppc_md structures until we find the proper
 	 * one for the current machine type
 	 */
-	DBG("Probing machine type for platform %x...\n",
-	    systemcfg->platform);
+	DBG("Probing machine type for platform %x...\n", _machine);
 
 	for (mach = machines; *mach; mach++) {
-		if ((*mach)->probe(systemcfg->platform))
+		if ((*mach)->probe(_machine))
 			break;
 	}
 	/* What can we do if we didn't find ? */
@@ -399,22 +263,74 @@ void __init early_setup(unsigned long dt_ptr)
 	DBG("Found, Initializing memory management...\n");
 
 	/*
-	 * Initialize stab / SLB management
+	 * Initialize the MMU Hash table and create the linear mapping
+	 * of memory. Has to be done before stab/slb initialization as
+	 * this is currently where the page size encoding is obtained
 	 */
-	stab_initialize(lpaca->stab_real);
+	htab_initialize();
 
 	/*
-	 * Initialize the MMU Hash table and create the linear mapping
-	 * of memory
+	 * Initialize stab / SLB management except on iSeries
 	 */
-	htab_initialize();
+	if (!firmware_has_feature(FW_FEATURE_ISERIES)) {
+		if (cpu_has_feature(CPU_FTR_SLB))
+			slb_initialize();
+		else
+			stab_initialize(lpaca->stab_real);
+	}
 
 	DBG(" <- early_setup()\n");
 }
 
+#ifdef CONFIG_SMP
+void early_setup_secondary(void)
+{
+	struct paca_struct *lpaca = get_paca();
+
+	/* Mark enabled in PACA */
+	lpaca->proc_enabled = 0;
+
+	/* Initialize hash table for that CPU */
+	htab_initialize_secondary();
+
+	/* Initialize STAB/SLB. We use a virtual address as it works
+	 * in real mode on pSeries and we want a virutal address on
+	 * iSeries anyway
+	 */
+	if (cpu_has_feature(CPU_FTR_SLB))
+		slb_initialize();
+	else
+		stab_initialize(lpaca->stab_addr);
+}
+
+#endif /* CONFIG_SMP */
+
+#if defined(CONFIG_SMP) || defined(CONFIG_KEXEC)
+void smp_release_cpus(void)
+{
+	extern unsigned long __secondary_hold_spinloop;
+
+	DBG(" -> smp_release_cpus()\n");
+
+	/* All secondary cpus are spinning on a common spinloop, release them
+	 * all now so they can start to spin on their individual paca
+	 * spinloops. For non SMP kernels, the secondary cpus never get out
+	 * of the common spinloop.
+	 * This is useless but harmless on iSeries, secondaries are already
+	 * waiting on their paca spinloops. */
+
+	__secondary_hold_spinloop = 1;
+	mb();
+
+	DBG(" <- smp_release_cpus()\n");
+}
+#else
+#define smp_release_cpus()
+#endif /* CONFIG_SMP || CONFIG_KEXEC */
 
 /*
- * Initialize some remaining members of the ppc64_caches and systemcfg structures
+ * Initialize some remaining members of the ppc64_caches and systemcfg
+ * structures
  * (at least until we get rid of them completely). This is mostly some
  * cache informations about the CPU that will be used by cache flush
  * routines and/or provided to userland
@@ -439,7 +355,7 @@ static void __init initialize_cache_info(void)
 			const char *dc, *ic;
 
 			/* Then read cache informations */
-			if (systemcfg->platform == PLATFORM_POWERMAC) {
+			if (_machine == PLATFORM_POWERMAC) {
 				dc = "d-cache-block-size";
 				ic = "i-cache-block-size";
 			} else {
@@ -459,9 +375,8 @@ static void __init initialize_cache_info(void)
 				DBG("Argh, can't find dcache properties ! "
 				    "sizep: %p, lsizep: %p\n", sizep, lsizep);
 
-			systemcfg->dcache_size = ppc64_caches.dsize = size;
-			systemcfg->dcache_line_size =
-				ppc64_caches.dline_size = lsize;
+			ppc64_caches.dsize = size;
+			ppc64_caches.dline_size = lsize;
 			ppc64_caches.log_dline_size = __ilog2(lsize);
 			ppc64_caches.dlines_per_page = PAGE_SIZE / lsize;
 
@@ -477,62 +392,16 @@ static void __init initialize_cache_info(void)
 				DBG("Argh, can't find icache properties ! "
 				    "sizep: %p, lsizep: %p\n", sizep, lsizep);
 
-			systemcfg->icache_size = ppc64_caches.isize = size;
-			systemcfg->icache_line_size =
-				ppc64_caches.iline_size = lsize;
+			ppc64_caches.isize = size;
+			ppc64_caches.iline_size = lsize;
 			ppc64_caches.log_iline_size = __ilog2(lsize);
 			ppc64_caches.ilines_per_page = PAGE_SIZE / lsize;
 		}
 	}
 
-	/* Add an eye catcher and the systemcfg layout version number */
-	strcpy(systemcfg->eye_catcher, "SYSTEMCFG:PPC64");
-	systemcfg->version.major = SYSTEMCFG_MAJOR;
-	systemcfg->version.minor = SYSTEMCFG_MINOR;
-	systemcfg->processor = mfspr(SPRN_PVR);
-
 	DBG(" <- initialize_cache_info()\n");
 }
 
-static void __init check_for_initrd(void)
-{
-#ifdef CONFIG_BLK_DEV_INITRD
-	u64 *prop;
-
-	DBG(" -> check_for_initrd()\n");
-
-	if (of_chosen) {
-		prop = (u64 *)get_property(of_chosen,
-				"linux,initrd-start", NULL);
-		if (prop != NULL) {
-			initrd_start = (unsigned long)__va(*prop);
-			prop = (u64 *)get_property(of_chosen,
-					"linux,initrd-end", NULL);
-			if (prop != NULL) {
-				initrd_end = (unsigned long)__va(*prop);
-				initrd_below_start_ok = 1;
-			} else
-				initrd_start = 0;
-		}
-	}
-
-	/* If we were passed an initrd, set the ROOT_DEV properly if the values
-	 * look sensible. If not, clear initrd reference.
-	 */
-	if (initrd_start >= KERNELBASE && initrd_end >= KERNELBASE &&
-	    initrd_end > initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-		initrd_start = initrd_end = 0;
-
-	if (initrd_start)
-		printk("Found initrd at 0x%lx:0x%lx\n", initrd_start, initrd_end);
-
-	DBG(" <- check_for_initrd()\n");
-#endif /* CONFIG_BLK_DEV_INITRD */
-}
-
-#endif /* CONFIG_PPC_MULTIPLATFORM */
 
 /*
  * Do some initial setup of the system.  The parameters are those which 
@@ -542,19 +411,15 @@ void __init setup_system(void)
 {
 	DBG(" -> setup_system()\n");
 
-#ifdef CONFIG_PPC_ISERIES
-	/* pSeries systems are identified in prom.c via OF. */
-	if (itLpNaca.xLparInstalled == 1)
-		systemcfg->platform = PLATFORM_ISERIES_LPAR;
-
-	ppc_md.init_early();
-#else /* CONFIG_PPC_ISERIES */
-
 	/*
 	 * Unflatten the device-tree passed by prom_init or kexec
 	 */
 	unflatten_device_tree();
 
+#ifdef CONFIG_KEXEC
+	kexec_setup();	/* requires unflattened device tree. */
+#endif
+
 	/*
 	 * Fill the ppc64_caches & systemcfg structures with informations
 	 * retreived from the device-tree. Need to be called before
@@ -592,6 +457,10 @@ void __init setup_system(void)
 	 */
 	finish_device_tree();
 
+#ifdef CONFIG_BOOTX_TEXT
+	init_boot_display();
+#endif
+
 	/*
 	 * Initialize xmon
 	 */
@@ -607,34 +476,27 @@ void __init setup_system(void)
 	strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE);
 
 	parse_early_param();
-#endif /* !CONFIG_PPC_ISERIES */
 
-#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_ISERIES)
-	/*
-	 * iSeries has already initialized the cpu maps at this point.
-	 */
-	setup_cpu_maps();
+	check_smt_enabled();
+	smp_setup_cpu_maps();
 
 	/* Release secondary cpus out of their spinloops at 0x60 now that
 	 * we can map physical -> logical CPU ids
 	 */
 	smp_release_cpus();
-#endif /* defined(CONFIG_SMP) && !defined(CONFIG_PPC_ISERIES) */
 
 	printk("Starting Linux PPC64 %s\n", system_utsname.version);
 
 	printk("-----------------------------------------------------\n");
 	printk("ppc64_pft_size                = 0x%lx\n", ppc64_pft_size);
-	printk("ppc64_debug_switch            = 0x%lx\n", ppc64_debug_switch);
-	printk("ppc64_interrupt_controller    = 0x%ld\n", ppc64_interrupt_controller);
-	printk("systemcfg                     = 0x%p\n", systemcfg);
-	printk("systemcfg->platform           = 0x%x\n", systemcfg->platform);
-	printk("systemcfg->processorCount     = 0x%lx\n", systemcfg->processorCount);
-	printk("systemcfg->physicalMemorySize = 0x%lx\n", systemcfg->physicalMemorySize);
+	printk("ppc64_interrupt_controller    = 0x%ld\n",
+	       ppc64_interrupt_controller);
+	printk("platform                      = 0x%x\n", _machine);
+	printk("physicalMemorySize            = 0x%lx\n", lmb_phys_mem_size());
 	printk("ppc64_caches.dcache_line_size = 0x%x\n",
-			ppc64_caches.dline_size);
+	       ppc64_caches.dline_size);
 	printk("ppc64_caches.icache_line_size = 0x%x\n",
-			ppc64_caches.iline_size);
+	       ppc64_caches.iline_size);
 	printk("htab_address                  = 0x%p\n", htab_address);
 	printk("htab_hash_mask                = 0x%lx\n", htab_hash_mask);
 	printk("-----------------------------------------------------\n");
@@ -644,51 +506,6 @@ void __init setup_system(void)
 	DBG(" <- setup_system()\n");
 }
 
-/* also used by kexec */
-void machine_shutdown(void)
-{
-	if (ppc_md.nvram_sync)
-		ppc_md.nvram_sync();
-}
-
-void machine_restart(char *cmd)
-{
-	machine_shutdown();
-	ppc_md.restart(cmd);
-#ifdef CONFIG_SMP
-	smp_send_stop();
-#endif
-	printk(KERN_EMERG "System Halted, OK to turn off power\n");
-	local_irq_disable();
-	while (1) ;
-}
-
-void machine_power_off(void)
-{
-	machine_shutdown();
-	ppc_md.power_off();
-#ifdef CONFIG_SMP
-	smp_send_stop();
-#endif
-	printk(KERN_EMERG "System Halted, OK to turn off power\n");
-	local_irq_disable();
-	while (1) ;
-}
-/* Used by the G5 thermal driver */
-EXPORT_SYMBOL_GPL(machine_power_off);
-
-void machine_halt(void)
-{
-	machine_shutdown();
-	ppc_md.halt();
-#ifdef CONFIG_SMP
-	smp_send_stop();
-#endif
-	printk(KERN_EMERG "System Halted, OK to turn off power\n");
-	local_irq_disable();
-	while (1) ;
-}
-
 static int ppc64_panic_event(struct notifier_block *this,
                              unsigned long event, void *ptr)
 {
@@ -696,240 +513,6 @@ static int ppc64_panic_event(struct notifier_block *this,
 	return NOTIFY_DONE;
 }
 
-
-#ifdef CONFIG_SMP
-DEFINE_PER_CPU(unsigned int, pvr);
-#endif
-
-static int show_cpuinfo(struct seq_file *m, void *v)
-{
-	unsigned long cpu_id = (unsigned long)v - 1;
-	unsigned int pvr;
-	unsigned short maj;
-	unsigned short min;
-
-	if (cpu_id == NR_CPUS) {
-		seq_printf(m, "timebase\t: %lu\n", ppc_tb_freq);
-
-		if (ppc_md.get_cpuinfo != NULL)
-			ppc_md.get_cpuinfo(m);
-
-		return 0;
-	}
-
-	/* We only show online cpus: disable preempt (overzealous, I
-	 * knew) to prevent cpu going down. */
-	preempt_disable();
-	if (!cpu_online(cpu_id)) {
-		preempt_enable();
-		return 0;
-	}
-
-#ifdef CONFIG_SMP
-	pvr = per_cpu(pvr, cpu_id);
-#else
-	pvr = mfspr(SPRN_PVR);
-#endif
-	maj = (pvr >> 8) & 0xFF;
-	min = pvr & 0xFF;
-
-	seq_printf(m, "processor\t: %lu\n", cpu_id);
-	seq_printf(m, "cpu\t\t: ");
-
-	if (cur_cpu_spec->pvr_mask)
-		seq_printf(m, "%s", cur_cpu_spec->cpu_name);
-	else
-		seq_printf(m, "unknown (%08x)", pvr);
-
-#ifdef CONFIG_ALTIVEC
-	if (cpu_has_feature(CPU_FTR_ALTIVEC))
-		seq_printf(m, ", altivec supported");
-#endif /* CONFIG_ALTIVEC */
-
-	seq_printf(m, "\n");
-
-	/*
-	 * Assume here that all clock rates are the same in a
-	 * smp system.  -- Cort
-	 */
-	seq_printf(m, "clock\t\t: %lu.%06luMHz\n", ppc_proc_freq / 1000000,
-		   ppc_proc_freq % 1000000);
-
-	seq_printf(m, "revision\t: %hd.%hd\n\n", maj, min);
-
-	preempt_enable();
-	return 0;
-}
-
-static void *c_start(struct seq_file *m, loff_t *pos)
-{
-	return *pos <= NR_CPUS ? (void *)((*pos)+1) : NULL;
-}
-static void *c_next(struct seq_file *m, void *v, loff_t *pos)
-{
-	++*pos;
-	return c_start(m, pos);
-}
-static void c_stop(struct seq_file *m, void *v)
-{
-}
-struct seq_operations cpuinfo_op = {
-	.start =c_start,
-	.next =	c_next,
-	.stop =	c_stop,
-	.show =	show_cpuinfo,
-};
-
-/*
- * These three variables are used to save values passed to us by prom_init()
- * via the device tree. The TCE variables are needed because with a memory_limit
- * in force we may need to explicitly map the TCE are at the top of RAM.
- */
-unsigned long memory_limit;
-unsigned long tce_alloc_start;
-unsigned long tce_alloc_end;
-
-#ifdef CONFIG_PPC_ISERIES
-/*
- * On iSeries we just parse the mem=X option from the command line.
- * On pSeries it's a bit more complicated, see prom_init_mem()
- */
-static int __init early_parsemem(char *p)
-{
-	if (!p)
-		return 0;
-
-	memory_limit = ALIGN(memparse(p, &p), PAGE_SIZE);
-
-	return 0;
-}
-early_param("mem", early_parsemem);
-#endif /* CONFIG_PPC_ISERIES */
-
-#ifdef CONFIG_PPC_MULTIPLATFORM
-static int __init set_preferred_console(void)
-{
-	struct device_node *prom_stdout = NULL;
-	char *name;
-	u32 *spd;
-	int offset = 0;
-
-	DBG(" -> set_preferred_console()\n");
-
-	/* The user has requested a console so this is already set up. */
-	if (strstr(saved_command_line, "console=")) {
-		DBG(" console was specified !\n");
-		return -EBUSY;
-	}
-
-	if (!of_chosen) {
-		DBG(" of_chosen is NULL !\n");
-		return -ENODEV;
-	}
-	/* We are getting a weird phandle from OF ... */
-	/* ... So use the full path instead */
-	name = (char *)get_property(of_chosen, "linux,stdout-path", NULL);
-	if (name == NULL) {
-		DBG(" no linux,stdout-path !\n");
-		return -ENODEV;
-	}
-	prom_stdout = of_find_node_by_path(name);
-	if (!prom_stdout) {
-		DBG(" can't find stdout package %s !\n", name);
-		return -ENODEV;
-	}	
-	DBG("stdout is %s\n", prom_stdout->full_name);
-
-	name = (char *)get_property(prom_stdout, "name", NULL);
-	if (!name) {
-		DBG(" stdout package has no name !\n");
-		goto not_found;
-	}
-	spd = (u32 *)get_property(prom_stdout, "current-speed", NULL);
-
-	if (0)
-		;
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	else if (strcmp(name, "serial") == 0) {
-		int i;
-		u32 *reg = (u32 *)get_property(prom_stdout, "reg", &i);
-		if (i > 8) {
-			switch (reg[1]) {
-				case 0x3f8:
-					offset = 0;
-					break;
-				case 0x2f8:
-					offset = 1;
-					break;
-				case 0x898:
-					offset = 2;
-					break;
-				case 0x890:
-					offset = 3;
-					break;
-				default:
-					/* We dont recognise the serial port */
-					goto not_found;
-			}
-		}
-	}
-#endif /* CONFIG_SERIAL_8250_CONSOLE */
-#ifdef CONFIG_PPC_PSERIES
-	else if (strcmp(name, "vty") == 0) {
- 		u32 *reg = (u32 *)get_property(prom_stdout, "reg", NULL);
- 		char *compat = (char *)get_property(prom_stdout, "compatible", NULL);
-
- 		if (reg && compat && (strcmp(compat, "hvterm-protocol") == 0)) {
- 			/* Host Virtual Serial Interface */
- 			int offset;
- 			switch (reg[0]) {
- 				case 0x30000000:
- 					offset = 0;
- 					break;
- 				case 0x30000001:
- 					offset = 1;
- 					break;
- 				default:
-					goto not_found;
- 			}
-			of_node_put(prom_stdout);
-			DBG("Found hvsi console at offset %d\n", offset);
- 			return add_preferred_console("hvsi", offset, NULL);
- 		} else {
- 			/* pSeries LPAR virtual console */
-			of_node_put(prom_stdout);
-			DBG("Found hvc console\n");
- 			return add_preferred_console("hvc", 0, NULL);
- 		}
-	}
-#endif /* CONFIG_PPC_PSERIES */
-#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
-	else if (strcmp(name, "ch-a") == 0)
-		offset = 0;
-	else if (strcmp(name, "ch-b") == 0)
-		offset = 1;
-#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
-	else
-		goto not_found;
-	of_node_put(prom_stdout);
-
-	DBG("Found serial console at ttyS%d\n", offset);
-
-	if (spd) {
-		static char __initdata opt[16];
-		sprintf(opt, "%d", *spd);
-		return add_preferred_console("ttyS", offset, opt);
-	} else
-		return add_preferred_console("ttyS", offset, NULL);
-
- not_found:
-	DBG("No preferred console found !\n");
-	of_node_put(prom_stdout);
-	return -ENODEV;
-}
-console_initcall(set_preferred_console);
-#endif /* CONFIG_PPC_MULTIPLATFORM */
-
 #ifdef CONFIG_IRQSTACKS
 static void __init irqstack_early_init(void)
 {
@@ -940,10 +523,12 @@ static void __init irqstack_early_init(void)
 	 * SLB misses on them.
 	 */
 	for_each_cpu(i) {
-		softirq_ctx[i] = (struct thread_info *)__va(lmb_alloc_base(THREAD_SIZE,
-					THREAD_SIZE, 0x10000000));
-		hardirq_ctx[i] = (struct thread_info *)__va(lmb_alloc_base(THREAD_SIZE,
-					THREAD_SIZE, 0x10000000));
+		softirq_ctx[i] = (struct thread_info *)
+			__va(lmb_alloc_base(THREAD_SIZE,
+					    THREAD_SIZE, 0x10000000));
+		hardirq_ctx[i] = (struct thread_info *)
+			__va(lmb_alloc_base(THREAD_SIZE,
+					    THREAD_SIZE, 0x10000000));
 	}
 }
 #else
@@ -971,36 +556,8 @@ static void __init emergency_stack_init(void)
 	limit = min(0x10000000UL, lmb.rmo_size);
 
 	for_each_cpu(i)
-		paca[i].emergency_sp = __va(lmb_alloc_base(PAGE_SIZE, 128,
-						limit)) + PAGE_SIZE;
-}
-
-/*
- * Called from setup_arch to initialize the bitmap of available
- * syscalls in the systemcfg page
- */
-void __init setup_syscall_map(void)
-{
-	unsigned int i, count64 = 0, count32 = 0;
-	extern unsigned long *sys_call_table;
-	extern unsigned long *sys_call_table32;
-	extern unsigned long sys_ni_syscall;
-
-
-	for (i = 0; i < __NR_syscalls; i++) {
-		if (sys_call_table[i] == sys_ni_syscall)
-			continue;
-		count64++;
-		systemcfg->syscall_map_64[i >> 5] |= 0x80000000UL >> (i & 0x1f);
-	}
-	for (i = 0; i < __NR_syscalls; i++) {
-		if (sys_call_table32[i] == sys_ni_syscall)
-			continue;
-		count32++;
-		systemcfg->syscall_map_32[i >> 5] |= 0x80000000UL >> (i & 0x1f);
-	}
-	printk(KERN_INFO "Syscall map setup, %d 32 bits and %d 64 bits syscalls\n",
-	       count32, count64);
+		paca[i].emergency_sp =
+		__va(lmb_alloc_base(HW_PAGE_SIZE, 128, limit)) + HW_PAGE_SIZE;
 }
 
 /*
@@ -1044,8 +601,9 @@ void __init setup_arch(char **cmdline_p)
 	do_init_bootmem();
 	sparse_init();
 
-	/* initialize the syscall map in systemcfg */
-	setup_syscall_map();
+#ifdef CONFIG_DUMMY_CONSOLE
+	conswitchp = &dummy_con;
+#endif
 
 	ppc_md.setup_arch();
 
@@ -1091,15 +649,6 @@ void ppc64_terminate_msg(unsigned int src, const char *msg)
 	printk("[terminate]%04x %s\n", src, msg);
 }
 
-/* This should only be called on processor 0 during calibrate decr */
-void __init setup_default_decr(void)
-{
-	struct paca_struct *lpaca = get_paca();
-
-	lpaca->default_decr = tb_ticks_per_jiffy;
-	lpaca->next_jiffy_update_tb = get_tb() + tb_ticks_per_jiffy;
-}
-
 #ifndef CONFIG_PPC_ISERIES
 /*
  * This function can be used by platforms to "find" legacy serial ports.
@@ -1289,26 +838,6 @@ int check_legacy_ioport(unsigned long base_port)
 }
 EXPORT_SYMBOL(check_legacy_ioport);
 
-#ifdef CONFIG_XMON
-static int __init early_xmon(char *p)
-{
-	/* ensure xmon is enabled */
-	if (p) {
-		if (strncmp(p, "on", 2) == 0)
-			xmon_init(1);
-		if (strncmp(p, "off", 3) == 0)
-			xmon_init(0);
-		if (strncmp(p, "early", 5) != 0)
-			return 0;
-	}
-	xmon_init(1);
-	debugger(NULL);
-
-	return 0;
-}
-early_param("xmon", early_xmon);
-#endif
-
 void cpu_die(void)
 {
 	if (ppc_md.cpu_die)
diff --git a/arch/ppc64/kernel/signal32.c b/arch/powerpc/kernel/signal_32.c
index a8b7a5a56bb4..5a2eba60dd39 100644
--- a/arch/ppc64/kernel/signal32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -1,56 +1,353 @@
 /*
- * signal32.c: Support 32bit signal syscalls.
+ * Signal handling for 32bit PPC and 32bit tasks on 64bit PPC
  *
+ *  PowerPC version
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
  * Copyright (C) 2001 IBM
  * Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
  * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
  *
- * These routines maintain argument size conversion between 32bit and 64bit
- * environment.
+ *  Derived from "arch/i386/kernel/signal.c"
+ *    Copyright (C) 1991, 1992 Linus Torvalds
+ *    1997-11-28  Modified for POSIX.1b signals by Richard Henderson
  *
- *      This program is free software; you can redistribute it and/or
- *      modify it under the terms of the GNU General Public License
- *      as published by the Free Software Foundation; either version
- *      2 of the License, or (at your option) any later version.
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
  */
 
 #include <linux/config.h>
 #include <linux/sched.h>
-#include <linux/mm.h> 
+#include <linux/mm.h>
 #include <linux/smp.h>
 #include <linux/smp_lock.h>
 #include <linux/kernel.h>
 #include <linux/signal.h>
-#include <linux/syscalls.h>
 #include <linux/errno.h>
 #include <linux/elf.h>
+#ifdef CONFIG_PPC64
+#include <linux/syscalls.h>
 #include <linux/compat.h>
 #include <linux/ptrace.h>
-#include <asm/ppc32.h>
+#else
+#include <linux/wait.h>
+#include <linux/ptrace.h>
+#include <linux/unistd.h>
+#include <linux/stddef.h>
+#include <linux/tty.h>
+#include <linux/binfmts.h>
+#include <linux/suspend.h>
+#endif
+
 #include <asm/uaccess.h>
-#include <asm/ppcdebug.h>
-#include <asm/unistd.h>
 #include <asm/cacheflush.h>
+#include <asm/sigcontext.h>
 #include <asm/vdso.h>
+#ifdef CONFIG_PPC64
+#include "ppc32.h"
+#include <asm/unistd.h>
+#else
+#include <asm/ucontext.h>
+#include <asm/pgtable.h>
+#endif
 
-#define DEBUG_SIG 0
+#undef DEBUG_SIG
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
-#define GP_REGS_SIZE32	min(sizeof(elf_gregset_t32), sizeof(struct pt_regs32))
+#ifdef CONFIG_PPC64
+#define do_signal	do_signal32
+#define sys_sigsuspend	compat_sys_sigsuspend
+#define sys_rt_sigsuspend	compat_sys_rt_sigsuspend
+#define sys_rt_sigreturn	compat_sys_rt_sigreturn
+#define sys_sigaction	compat_sys_sigaction
+#define sys_swapcontext	compat_sys_swapcontext
+#define sys_sigreturn	compat_sys_sigreturn
+
+#define old_sigaction	old_sigaction32
+#define sigcontext	sigcontext32
+#define mcontext	mcontext32
+#define ucontext	ucontext32
+
+/*
+ * Returning 0 means we return to userspace via
+ * ret_from_except and thus restore all user
+ * registers from *regs.  This is what we need
+ * to do when a signal has been delivered.
+ */
+#define sigreturn_exit(regs)	return 0
+
+#define GP_REGS_SIZE	min(sizeof(elf_gregset_t32), sizeof(struct pt_regs32))
+#undef __SIGNAL_FRAMESIZE
+#define __SIGNAL_FRAMESIZE	__SIGNAL_FRAMESIZE32
+#undef ELF_NVRREG
+#define ELF_NVRREG	ELF_NVRREG32
+
+/*
+ * Functions for flipping sigsets (thanks to brain dead generic
+ * implementation that makes things simple for little endian only)
+ */
+static inline int put_sigset_t(compat_sigset_t __user *uset, sigset_t *set)
+{
+	compat_sigset_t	cset;
+
+	switch (_NSIG_WORDS) {
+	case 4: cset.sig[5] = set->sig[3] & 0xffffffffull;
+		cset.sig[7] = set->sig[3] >> 32;
+	case 3: cset.sig[4] = set->sig[2] & 0xffffffffull;
+		cset.sig[5] = set->sig[2] >> 32;
+	case 2: cset.sig[2] = set->sig[1] & 0xffffffffull;
+		cset.sig[3] = set->sig[1] >> 32;
+	case 1: cset.sig[0] = set->sig[0] & 0xffffffffull;
+		cset.sig[1] = set->sig[0] >> 32;
+	}
+	return copy_to_user(uset, &cset, sizeof(*uset));
+}
+
+static inline int get_sigset_t(sigset_t *set,
+			       const compat_sigset_t __user *uset)
+{
+	compat_sigset_t s32;
+
+	if (copy_from_user(&s32, uset, sizeof(*uset)))
+		return -EFAULT;
+
+	/*
+	 * Swap the 2 words of the 64-bit sigset_t (they are stored
+	 * in the "wrong" endian in 32-bit user storage).
+	 */
+	switch (_NSIG_WORDS) {
+	case 4: set->sig[3] = s32.sig[6] | (((long)s32.sig[7]) << 32);
+	case 3: set->sig[2] = s32.sig[4] | (((long)s32.sig[5]) << 32);
+	case 2: set->sig[1] = s32.sig[2] | (((long)s32.sig[3]) << 32);
+	case 1: set->sig[0] = s32.sig[0] | (((long)s32.sig[1]) << 32);
+	}
+	return 0;
+}
+
+static inline int get_old_sigaction(struct k_sigaction *new_ka,
+		struct old_sigaction __user *act)
+{
+	compat_old_sigset_t mask;
+	compat_uptr_t handler, restorer;
+
+	if (get_user(handler, &act->sa_handler) ||
+	    __get_user(restorer, &act->sa_restorer) ||
+	    __get_user(new_ka->sa.sa_flags, &act->sa_flags) ||
+	    __get_user(mask, &act->sa_mask))
+		return -EFAULT;
+	new_ka->sa.sa_handler = compat_ptr(handler);
+	new_ka->sa.sa_restorer = compat_ptr(restorer);
+	siginitset(&new_ka->sa.sa_mask, mask);
+	return 0;
+}
+
+static inline compat_uptr_t to_user_ptr(void *kp)
+{
+	return (compat_uptr_t)(u64)kp;
+}
+
+#define from_user_ptr(p)	compat_ptr(p)
+
+static inline int save_general_regs(struct pt_regs *regs,
+		struct mcontext __user *frame)
+{
+	elf_greg_t64 *gregs = (elf_greg_t64 *)regs;
+	int i;
+
+	for (i = 0; i <= PT_RESULT; i ++)
+		if (__put_user((unsigned int)gregs[i], &frame->mc_gregs[i]))
+			return -EFAULT;
+	return 0;
+}
+
+static inline int restore_general_regs(struct pt_regs *regs,
+		struct mcontext __user *sr)
+{
+	elf_greg_t64 *gregs = (elf_greg_t64 *)regs;
+	int i;
+
+	for (i = 0; i <= PT_RESULT; i++) {
+		if ((i == PT_MSR) || (i == PT_SOFTE))
+			continue;
+		if (__get_user(gregs[i], &sr->mc_gregs[i]))
+			return -EFAULT;
+	}
+	return 0;
+}
+
+#else /* CONFIG_PPC64 */
+
+extern void sigreturn_exit(struct pt_regs *);
+
+#define GP_REGS_SIZE	min(sizeof(elf_gregset_t), sizeof(struct pt_regs))
+
+static inline int put_sigset_t(sigset_t __user *uset, sigset_t *set)
+{
+	return copy_to_user(uset, set, sizeof(*uset));
+}
+
+static inline int get_sigset_t(sigset_t *set, const sigset_t __user *uset)
+{
+	return copy_from_user(set, uset, sizeof(*uset));
+}
+
+static inline int get_old_sigaction(struct k_sigaction *new_ka,
+		struct old_sigaction __user *act)
+{
+	old_sigset_t mask;
+
+	if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
+			__get_user(new_ka->sa.sa_handler, &act->sa_handler) ||
+			__get_user(new_ka->sa.sa_restorer, &act->sa_restorer))
+		return -EFAULT;
+	__get_user(new_ka->sa.sa_flags, &act->sa_flags);
+	__get_user(mask, &act->sa_mask);
+	siginitset(&new_ka->sa.sa_mask, mask);
+	return 0;
+}
+
+#define to_user_ptr(p)		(p)
+#define from_user_ptr(p)	(p)
+
+static inline int save_general_regs(struct pt_regs *regs,
+		struct mcontext __user *frame)
+{
+	return __copy_to_user(&frame->mc_gregs, regs, GP_REGS_SIZE);
+}
+
+static inline int restore_general_regs(struct pt_regs *regs,
+		struct mcontext __user *sr)
+{
+	/* copy up to but not including MSR */
+	if (__copy_from_user(regs, &sr->mc_gregs,
+				PT_MSR * sizeof(elf_greg_t)))
+		return -EFAULT;
+	/* copy from orig_r3 (the word after the MSR) up to the end */
+	if (__copy_from_user(&regs->orig_gpr3, &sr->mc_gregs[PT_ORIG_R3],
+				GP_REGS_SIZE - PT_ORIG_R3 * sizeof(elf_greg_t)))
+		return -EFAULT;
+	return 0;
+}
+
+#endif /* CONFIG_PPC64 */
+
+int do_signal(sigset_t *oldset, struct pt_regs *regs);
+
+/*
+ * Atomically swap in the new signal mask, and wait for a signal.
+ */
+long sys_sigsuspend(old_sigset_t mask, int p2, int p3, int p4, int p6, int p7,
+	       struct pt_regs *regs)
+{
+	sigset_t saveset;
+
+	mask &= _BLOCKABLE;
+	spin_lock_irq(&current->sighand->siglock);
+	saveset = current->blocked;
+	siginitset(&current->blocked, mask);
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+
+	regs->result = -EINTR;
+	regs->gpr[3] = EINTR;
+	regs->ccr |= 0x10000000;
+	while (1) {
+		current->state = TASK_INTERRUPTIBLE;
+		schedule();
+		if (do_signal(&saveset, regs))
+			sigreturn_exit(regs);
+	}
+}
+
+long sys_rt_sigsuspend(
+#ifdef CONFIG_PPC64
+		compat_sigset_t __user *unewset,
+#else
+		sigset_t __user *unewset,
+#endif
+		size_t sigsetsize, int p3, int p4,
+		int p6, int p7, struct pt_regs *regs)
+{
+	sigset_t saveset, newset;
+
+	/* XXX: Don't preclude handling different sized sigset_t's.  */
+	if (sigsetsize != sizeof(sigset_t))
+		return -EINVAL;
+
+	if (get_sigset_t(&newset, unewset))
+		return -EFAULT;
+	sigdelsetmask(&newset, ~_BLOCKABLE);
+
+	spin_lock_irq(&current->sighand->siglock);
+	saveset = current->blocked;
+	current->blocked = newset;
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+
+	regs->result = -EINTR;
+	regs->gpr[3] = EINTR;
+	regs->ccr |= 0x10000000;
+	while (1) {
+		current->state = TASK_INTERRUPTIBLE;
+		schedule();
+		if (do_signal(&saveset, regs))
+			sigreturn_exit(regs);
+	}
+}
+
+#ifdef CONFIG_PPC32
+long sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, int r5,
+		int r6, int r7, int r8, struct pt_regs *regs)
+{
+	return do_sigaltstack(uss, uoss, regs->gpr[1]);
+}
+#endif
+
+long sys_sigaction(int sig, struct old_sigaction __user *act,
+		struct old_sigaction __user *oact)
+{
+	struct k_sigaction new_ka, old_ka;
+	int ret;
+
+#ifdef CONFIG_PPC64
+	if (sig < 0)
+		sig = -sig;
+#endif
+
+	if (act) {
+		if (get_old_sigaction(&new_ka, act))
+			return -EFAULT;
+	}
+
+	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
+	if (!ret && oact) {
+		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
+		    __put_user(to_user_ptr(old_ka.sa.sa_handler),
+			    &oact->sa_handler) ||
+		    __put_user(to_user_ptr(old_ka.sa.sa_restorer),
+			    &oact->sa_restorer) ||
+		    __put_user(old_ka.sa.sa_flags, &oact->sa_flags) ||
+		    __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask))
+			return -EFAULT;
+	}
+
+	return ret;
+}
 
 /*
  * When we have signals to deliver, we set up on the
  * user stack, going down from the original stack pointer:
- *	a sigregs32 struct
- *	a sigcontext32 struct
- *	a gap of __SIGNAL_FRAMESIZE32 bytes
+ *	a sigregs struct
+ *	a sigcontext struct
+ *	a gap of __SIGNAL_FRAMESIZE bytes
  *
  * Each of these things must be a multiple of 16 bytes in size.
  *
  */
-struct sigregs32 {
-	struct mcontext32	mctx;		/* all the register values */
+struct sigregs {
+	struct mcontext	mctx;		/* all the register values */
 	/*
 	 * Programs using the rs6000/xcoff abi can save up to 19 gp
 	 * regs and 18 fp regs below sp before decrementing it.
@@ -64,17 +361,21 @@ struct sigregs32 {
 /*
  *  When we have rt signals to deliver, we set up on the
  *  user stack, going down from the original stack pointer:
- *	one rt_sigframe32 struct (siginfo + ucontext + ABI gap)
- *	a gap of __SIGNAL_FRAMESIZE32+16 bytes
- *  (the +16 is to get the siginfo and ucontext32 in the same
+ *	one rt_sigframe struct (siginfo + ucontext + ABI gap)
+ *	a gap of __SIGNAL_FRAMESIZE+16 bytes
+ *  (the +16 is to get the siginfo and ucontext in the same
  *  positions as in older kernels).
  *
  *  Each of these things must be a multiple of 16 bytes in size.
  *
  */
-struct rt_sigframe32 {
-	compat_siginfo_t	info;
-	struct ucontext32	uc;
+struct rt_sigframe {
+#ifdef CONFIG_PPC64
+	compat_siginfo_t info;
+#else
+	struct siginfo info;
+#endif
+	struct ucontext	uc;
 	/*
 	 * Programs using the rs6000/xcoff abi can save up to 19 gp
 	 * regs and 18 fp regs below sp before decrementing it.
@@ -82,76 +383,32 @@ struct rt_sigframe32 {
 	int			abigap[56];
 };
 
-
-/*
- * Common utility functions used by signal and context support
- *
- */
-
-/*
- * Restore the user process's signal mask
- * (implemented in signal.c)
- */
-extern void restore_sigmask(sigset_t *set);
-
-/*
- * Functions for flipping sigsets (thanks to brain dead generic
- * implementation that makes things simple for little endian only
- */
-static inline void compat_from_sigset(compat_sigset_t *compat, sigset_t *set)
-{
-	switch (_NSIG_WORDS) {
-	case 4: compat->sig[5] = set->sig[3] & 0xffffffffull ;
-		compat->sig[7] = set->sig[3] >> 32; 
-	case 3: compat->sig[4] = set->sig[2] & 0xffffffffull ;
-		compat->sig[5] = set->sig[2] >> 32; 
-	case 2: compat->sig[2] = set->sig[1] & 0xffffffffull ;
-		compat->sig[3] = set->sig[1] >> 32; 
-	case 1: compat->sig[0] = set->sig[0] & 0xffffffffull ;
-		compat->sig[1] = set->sig[0] >> 32; 
-	}
-}
-
-static inline void sigset_from_compat(sigset_t *set, compat_sigset_t *compat)
-{
-	switch (_NSIG_WORDS) {
-	case 4: set->sig[3] = compat->sig[6] | (((long)compat->sig[7]) << 32);
-	case 3: set->sig[2] = compat->sig[4] | (((long)compat->sig[5]) << 32);
-	case 2: set->sig[1] = compat->sig[2] | (((long)compat->sig[3]) << 32);
-	case 1: set->sig[0] = compat->sig[0] | (((long)compat->sig[1]) << 32);
-	}
-}
-
-
 /*
  * Save the current user registers on the user stack.
- * We only save the altivec registers if the process has used
- * altivec instructions at some point.
+ * We only save the altivec/spe registers if the process has used
+ * altivec/spe instructions at some point.
  */
-static int save_user_regs(struct pt_regs *regs, struct mcontext32 __user *frame, int sigret)
+static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
+		int sigret)
 {
-	elf_greg_t64 *gregs = (elf_greg_t64 *)regs;
-	int i, err = 0;
-
+#ifdef CONFIG_PPC32
+	CHECK_FULL_REGS(regs);
+#endif
 	/* Make sure floating point registers are stored in regs */
 	flush_fp_to_thread(current);
 
 	/* save general and floating-point registers */
-	for (i = 0; i <= PT_RESULT; i ++)
-		err |= __put_user((unsigned int)gregs[i], &frame->mc_gregs[i]);
-	err |= __copy_to_user(&frame->mc_fregs, current->thread.fpr,
-			      ELF_NFPREG * sizeof(double));
-	if (err)
+	if (save_general_regs(regs, frame) ||
+	    __copy_to_user(&frame->mc_fregs, current->thread.fpr,
+		    ELF_NFPREG * sizeof(double)))
 		return 1;
 
-	current->thread.fpscr = 0;	/* turn off all fp exceptions */
-
 #ifdef CONFIG_ALTIVEC
 	/* save altivec registers */
 	if (current->thread.used_vr) {
 		flush_altivec_to_thread(current);
 		if (__copy_to_user(&frame->mc_vregs, current->thread.vr,
-				   ELF_NVRREG32 * sizeof(vector128)))
+				   ELF_NVRREG * sizeof(vector128)))
 			return 1;
 		/* set MSR_VEC in the saved MSR value to indicate that
 		   frame->mc_vregs contains valid data */
@@ -169,6 +426,25 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext32 __user *frame,
 		return 1;
 #endif /* CONFIG_ALTIVEC */
 
+#ifdef CONFIG_SPE
+	/* save spe registers */
+	if (current->thread.used_spe) {
+		flush_spe_to_thread(current);
+		if (__copy_to_user(&frame->mc_vregs, current->thread.evr,
+				   ELF_NEVRREG * sizeof(u32)))
+			return 1;
+		/* set MSR_SPE in the saved MSR value to indicate that
+		   frame->mc_vregs contains valid data */
+		if (__put_user(regs->msr | MSR_SPE, &frame->mc_gregs[PT_MSR]))
+			return 1;
+	}
+	/* else assert((regs->msr & MSR_SPE) == 0) */
+
+	/* We always copy to/from spefscr */
+	if (__put_user(current->thread.spefscr, (u32 __user *)&frame->mc_vregs + ELF_NEVRREG))
+		return 1;
+#endif /* CONFIG_SPE */
+
 	if (sigret) {
 		/* Set up the sigreturn trampoline: li r0,sigret; sc */
 		if (__put_user(0x38000000UL + sigret, &frame->tramp[0])
@@ -186,13 +462,11 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext32 __user *frame,
  * (except for MSR).
  */
 static long restore_user_regs(struct pt_regs *regs,
-			      struct mcontext32 __user *sr, int sig)
+			      struct mcontext __user *sr, int sig)
 {
-	elf_greg_t64 *gregs = (elf_greg_t64 *)regs;
-	int i;
-	long err = 0;
+	long err;
 	unsigned int save_r2 = 0;
-#ifdef CONFIG_ALTIVEC
+#if defined(CONFIG_ALTIVEC) || defined(CONFIG_SPE)
 	unsigned long msr;
 #endif
 
@@ -202,11 +476,7 @@ static long restore_user_regs(struct pt_regs *regs,
 	 */
 	if (!sig)
 		save_r2 = (unsigned int)regs->gpr[2];
-	for (i = 0; i <= PT_RESULT; i++) {
-		if ((i == PT_MSR) || (i == PT_SOFTE))
-			continue;
-		err |= __get_user(gregs[i], &sr->mc_gregs[i]);
-	}
+	err = restore_general_regs(regs, sr);
 	if (!sig)
 		regs->gpr[2] = (unsigned long) save_r2;
 	if (err)
@@ -229,135 +499,51 @@ static long restore_user_regs(struct pt_regs *regs,
 				     sizeof(sr->mc_vregs)))
 			return 1;
 	} else if (current->thread.used_vr)
-		memset(current->thread.vr, 0, ELF_NVRREG32 * sizeof(vector128));
+		memset(current->thread.vr, 0, ELF_NVRREG * sizeof(vector128));
 
 	/* Always get VRSAVE back */
 	if (__get_user(current->thread.vrsave, (u32 __user *)&sr->mc_vregs[32]))
 		return 1;
 #endif /* CONFIG_ALTIVEC */
 
+#ifdef CONFIG_SPE
+	/* force the process to reload the spe registers from
+	   current->thread when it next does spe instructions */
+	regs->msr &= ~MSR_SPE;
+	if (!__get_user(msr, &sr->mc_gregs[PT_MSR]) && (msr & MSR_SPE) != 0) {
+		/* restore spe registers from the stack */
+		if (__copy_from_user(current->thread.evr, &sr->mc_vregs,
+				     ELF_NEVRREG * sizeof(u32)))
+			return 1;
+	} else if (current->thread.used_spe)
+		memset(current->thread.evr, 0, ELF_NEVRREG * sizeof(u32));
+
+	/* Always get SPEFSCR back */
+	if (__get_user(current->thread.spefscr, (u32 __user *)&sr->mc_vregs + ELF_NEVRREG))
+		return 1;
+#endif /* CONFIG_SPE */
+
 #ifndef CONFIG_SMP
 	preempt_disable();
 	if (last_task_used_math == current)
 		last_task_used_math = NULL;
 	if (last_task_used_altivec == current)
 		last_task_used_altivec = NULL;
+#ifdef CONFIG_SPE
+	if (last_task_used_spe == current)
+		last_task_used_spe = NULL;
+#endif
 	preempt_enable();
 #endif
 	return 0;
 }
 
-
-/*
- *  Start of nonRT signal support
- *
- *     sigset_t is 32 bits for non-rt signals
- *
- *  System Calls
- *       sigaction                sys32_sigaction
- *       sigreturn                sys32_sigreturn
- *
- *  Note sigsuspend has no special 32 bit routine - uses the 64 bit routine
- *
- *  Other routines
- *        setup_frame32
- */
-
-/*
- * Atomically swap in the new signal mask, and wait for a signal.
- */
-long sys32_sigsuspend(old_sigset_t mask, int p2, int p3, int p4, int p6, int p7,
-	       struct pt_regs *regs)
-{
-	sigset_t saveset;
-
-	mask &= _BLOCKABLE;
-	spin_lock_irq(&current->sighand->siglock);
-	saveset = current->blocked;
-	siginitset(&current->blocked, mask);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	regs->result = -EINTR;
-	regs->gpr[3] = EINTR;
-	regs->ccr |= 0x10000000;
-	while (1) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		if (do_signal32(&saveset, regs))
-			/*
-			 * Returning 0 means we return to userspace via
-			 * ret_from_except and thus restore all user
-			 * registers from *regs.  This is what we need
-			 * to do when a signal has been delivered.
-			 */
-			return 0;
-	}
-}
-
-long sys32_sigaction(int sig, struct old_sigaction32 __user *act,
-		struct old_sigaction32 __user *oact)
-{
-	struct k_sigaction new_ka, old_ka;
-	int ret;
-	
-	if (sig < 0)
-		sig = -sig;
-
-	if (act) {
-		compat_old_sigset_t mask;
-		compat_uptr_t handler, restorer;
-
-		if (get_user(handler, &act->sa_handler) ||
-		    __get_user(restorer, &act->sa_restorer) ||
-		    __get_user(new_ka.sa.sa_flags, &act->sa_flags) ||
-		    __get_user(mask, &act->sa_mask))
-			return -EFAULT;
-		new_ka.sa.sa_handler = compat_ptr(handler);
-		new_ka.sa.sa_restorer = compat_ptr(restorer);
-		siginitset(&new_ka.sa.sa_mask, mask);
-	}
-
-	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
-	if (!ret && oact) {
-		if (put_user((long)old_ka.sa.sa_handler, &oact->sa_handler) ||
-		    __put_user((long)old_ka.sa.sa_restorer, &oact->sa_restorer) ||
-		    __put_user(old_ka.sa.sa_flags, &oact->sa_flags) ||
-		    __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask))
-			return -EFAULT;
-	}
-
-	return ret;
-}
-
-
-
-/*
- *  Start of RT signal support
- *
- *     sigset_t is 64 bits for rt signals
- *
- *  System Calls
- *       sigaction                sys32_rt_sigaction
- *       sigpending               sys32_rt_sigpending
- *       sigprocmask              sys32_rt_sigprocmask
- *       sigreturn                sys32_rt_sigreturn
- *       sigqueueinfo             sys32_rt_sigqueueinfo
- *       sigsuspend               sys32_rt_sigsuspend
- *
- *  Other routines
- *        setup_rt_frame32
- *        copy_siginfo_to_user32
- *        siginfo32to64
- */
-
-
-long sys32_rt_sigaction(int sig, const struct sigaction32 __user *act,
+#ifdef CONFIG_PPC64
+long compat_sys_rt_sigaction(int sig, const struct sigaction32 __user *act,
 		struct sigaction32 __user *oact, size_t sigsetsize)
 {
 	struct k_sigaction new_ka, old_ka;
 	int ret;
-	compat_sigset_t set32;
 
 	/* XXX: Don't preclude handling different sized sigset_t's.  */
 	if (sigsetsize != sizeof(compat_sigset_t))
@@ -368,9 +554,7 @@ long sys32_rt_sigaction(int sig, const struct sigaction32 __user *act,
 
 		ret = get_user(handler, &act->sa_handler);
 		new_ka.sa.sa_handler = compat_ptr(handler);
-		ret |= __copy_from_user(&set32, &act->sa_mask,
-					sizeof(compat_sigset_t));
-		sigset_from_compat(&new_ka.sa.sa_mask, &set32);
+		ret |= get_sigset_t(&new_ka.sa.sa_mask, &act->sa_mask);
 		ret |= __get_user(new_ka.sa.sa_flags, &act->sa_flags);
 		if (ret)
 			return -EFAULT;
@@ -378,10 +562,8 @@ long sys32_rt_sigaction(int sig, const struct sigaction32 __user *act,
 
 	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
 	if (!ret && oact) {
-		compat_from_sigset(&set32, &old_ka.sa.sa_mask);
 		ret = put_user((long)old_ka.sa.sa_handler, &oact->sa_handler);
-		ret |= __copy_to_user(&oact->sa_mask, &set32,
-				      sizeof(compat_sigset_t));
+		ret |= put_sigset_t(&oact->sa_mask, &old_ka.sa.sa_mask);
 		ret |= __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
 	}
 	return ret;
@@ -394,41 +576,37 @@ long sys32_rt_sigaction(int sig, const struct sigaction32 __user *act,
  * of a signed int (msr in 32-bit mode) and the register representation
  * of a signed int (msr in 64-bit mode) is performed.
  */
-long sys32_rt_sigprocmask(u32 how, compat_sigset_t __user *set,
+long compat_sys_rt_sigprocmask(u32 how, compat_sigset_t __user *set,
 		compat_sigset_t __user *oset, size_t sigsetsize)
 {
 	sigset_t s;
 	sigset_t __user *up;
-	compat_sigset_t s32;
 	int ret;
 	mm_segment_t old_fs = get_fs();
 
 	if (set) {
-		if (copy_from_user (&s32, set, sizeof(compat_sigset_t)))
-			return -EFAULT;    
-		sigset_from_compat(&s, &s32);
+		if (get_sigset_t(&s, set))
+			return -EFAULT;
 	}
-	
+
 	set_fs(KERNEL_DS);
 	/* This is valid because of the set_fs() */
 	up = (sigset_t __user *) &s;
 	ret = sys_rt_sigprocmask((int)how, set ? up : NULL, oset ? up : NULL,
-				 sigsetsize); 
+				 sigsetsize);
 	set_fs(old_fs);
 	if (ret)
 		return ret;
 	if (oset) {
-		compat_from_sigset(&s32, &s);
-		if (copy_to_user (oset, &s32, sizeof(compat_sigset_t)))
+		if (put_sigset_t(oset, &s))
 			return -EFAULT;
 	}
 	return 0;
 }
 
-long sys32_rt_sigpending(compat_sigset_t __user *set, compat_size_t sigsetsize)
+long compat_sys_rt_sigpending(compat_sigset_t __user *set, compat_size_t sigsetsize)
 {
 	sigset_t s;
-	compat_sigset_t s32;
 	int ret;
 	mm_segment_t old_fs = get_fs();
 
@@ -437,8 +615,7 @@ long sys32_rt_sigpending(compat_sigset_t __user *set, compat_size_t sigsetsize)
 	ret = sys_rt_sigpending((sigset_t __user *) &s, sigsetsize);
 	set_fs(old_fs);
 	if (!ret) {
-		compat_from_sigset(&s32, &s);
-		if (copy_to_user (set, &s32, sizeof(compat_sigset_t)))
+		if (put_sigset_t(set, &s))
 			return -EFAULT;
 	}
 	return ret;
@@ -500,6 +677,8 @@ int copy_siginfo_to_user32(struct compat_siginfo __user *d, siginfo_t *s)
 	return err;
 }
 
+#define copy_siginfo_to_user	copy_siginfo_to_user32
+
 /*
  * Note: it is necessary to treat pid and sig as unsigned ints, with the
  * corresponding cast to a signed int to insure that the proper conversion
@@ -507,12 +686,12 @@ int copy_siginfo_to_user32(struct compat_siginfo __user *d, siginfo_t *s)
  * (msr in 32-bit mode) and the register representation of a signed int
  * (msr in 64-bit mode) is performed.
  */
-long sys32_rt_sigqueueinfo(u32 pid, u32 sig, compat_siginfo_t __user *uinfo)
+long compat_sys_rt_sigqueueinfo(u32 pid, u32 sig, compat_siginfo_t __user *uinfo)
 {
 	siginfo_t info;
 	int ret;
 	mm_segment_t old_fs = get_fs();
-	
+
 	if (copy_from_user (&info, uinfo, 3*sizeof(int)) ||
 	    copy_from_user (info._sifields._pad, uinfo->_sifields._pad, SI_PAD_SIZE32))
 		return -EFAULT;
@@ -522,58 +701,14 @@ long sys32_rt_sigqueueinfo(u32 pid, u32 sig, compat_siginfo_t __user *uinfo)
 	set_fs (old_fs);
 	return ret;
 }
-
-int sys32_rt_sigsuspend(compat_sigset_t __user * unewset, size_t sigsetsize, int p3,
-		int p4, int p6, int p7, struct pt_regs *regs)
-{
-	sigset_t saveset, newset;
-	compat_sigset_t s32;
-
-	/* XXX: Don't preclude handling different sized sigset_t's.  */
-	if (sigsetsize != sizeof(sigset_t))
-		return -EINVAL;
-
-	if (copy_from_user(&s32, unewset, sizeof(s32)))
-		return -EFAULT;
-
-	/*
-	 * Swap the 2 words of the 64-bit sigset_t (they are stored
-	 * in the "wrong" endian in 32-bit user storage).
-	 */
-	sigset_from_compat(&newset, &s32);
-
-	sigdelsetmask(&newset, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	saveset = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	regs->result = -EINTR;
-	regs->gpr[3] = EINTR;
-	regs->ccr |= 0x10000000;
-	while (1) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		if (do_signal32(&saveset, regs))
-			/*
-			 * Returning 0 means we return to userspace via
-			 * ret_from_except and thus restore all user
-			 * registers from *regs.  This is what we need
-			 * to do when a signal has been delivered.
-			 */
-			return 0;
-	}
-}
-
 /*
  *  Start Alternate signal stack support
  *
  *  System Calls
- *       sigaltatck               sys32_sigaltstack
+ *       sigaltatck               compat_sys_sigaltstack
  */
 
-int sys32_sigaltstack(u32 __new, u32 __old, int r5,
+int compat_sys_sigaltstack(u32 __new, u32 __old, int r5,
 		      int r6, int r7, int r8, struct pt_regs *regs)
 {
 	stack_32_t __user * newstack = (stack_32_t __user *)(long) __new;
@@ -615,51 +750,63 @@ int sys32_sigaltstack(u32 __new, u32 __old, int r5,
 		return -EFAULT;
 	return ret;
 }
+#endif /* CONFIG_PPC64 */
 
 
 /*
+ * Restore the user process's signal mask
+ */
+#ifdef CONFIG_PPC64
+extern void restore_sigmask(sigset_t *set);
+#else /* CONFIG_PPC64 */
+static void restore_sigmask(sigset_t *set)
+{
+	sigdelsetmask(set, ~_BLOCKABLE);
+	spin_lock_irq(&current->sighand->siglock);
+	current->blocked = *set;
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+}
+#endif
+
+/*
  * Set up a signal frame for a "real-time" signal handler
  * (one which gets siginfo).
  */
-static int handle_rt_signal32(unsigned long sig, struct k_sigaction *ka,
-			      siginfo_t *info, sigset_t *oldset,
-			      struct pt_regs * regs, unsigned long newsp)
+static int handle_rt_signal(unsigned long sig, struct k_sigaction *ka,
+		siginfo_t *info, sigset_t *oldset,
+		struct pt_regs *regs, unsigned long newsp)
 {
-	struct rt_sigframe32 __user *rt_sf;
-	struct mcontext32 __user *frame;
+	struct rt_sigframe __user *rt_sf;
+	struct mcontext __user *frame;
 	unsigned long origsp = newsp;
-	compat_sigset_t c_oldset;
 
 	/* Set up Signal Frame */
 	/* Put a Real Time Context onto stack */
 	newsp -= sizeof(*rt_sf);
-	rt_sf = (struct rt_sigframe32 __user *)newsp;
+	rt_sf = (struct rt_sigframe __user *)newsp;
 
 	/* create a stack frame for the caller of the handler */
-	newsp -= __SIGNAL_FRAMESIZE32 + 16;
+	newsp -= __SIGNAL_FRAMESIZE + 16;
 
 	if (!access_ok(VERIFY_WRITE, (void __user *)newsp, origsp - newsp))
 		goto badframe;
 
-	compat_from_sigset(&c_oldset, oldset);
-
 	/* Put the siginfo & fill in most of the ucontext */
-	if (copy_siginfo_to_user32(&rt_sf->info, info)
+	if (copy_siginfo_to_user(&rt_sf->info, info)
 	    || __put_user(0, &rt_sf->uc.uc_flags)
 	    || __put_user(0, &rt_sf->uc.uc_link)
 	    || __put_user(current->sas_ss_sp, &rt_sf->uc.uc_stack.ss_sp)
 	    || __put_user(sas_ss_flags(regs->gpr[1]),
 			  &rt_sf->uc.uc_stack.ss_flags)
 	    || __put_user(current->sas_ss_size, &rt_sf->uc.uc_stack.ss_size)
-	    || __put_user((u32)(u64)&rt_sf->uc.uc_mcontext, &rt_sf->uc.uc_regs)
-	    || __copy_to_user(&rt_sf->uc.uc_sigmask, &c_oldset, sizeof(c_oldset)))
+	    || __put_user(to_user_ptr(&rt_sf->uc.uc_mcontext),
+		    &rt_sf->uc.uc_regs)
+	    || put_sigset_t(&rt_sf->uc.uc_sigmask, oldset))
 		goto badframe;
 
 	/* Save user registers on the stack */
 	frame = &rt_sf->uc.uc_mcontext;
-	if (put_user(regs->gpr[1], (u32 __user *)newsp))
-		goto badframe;
-
 	if (vdso32_rt_sigtramp && current->thread.vdso_base) {
 		if (save_user_regs(regs, frame, 0))
 			goto badframe;
@@ -669,22 +816,28 @@ static int handle_rt_signal32(unsigned long sig, struct k_sigaction *ka,
 			goto badframe;
 		regs->link = (unsigned long) frame->tramp;
 	}
-	regs->gpr[1] = (unsigned long) newsp;
+
+	current->thread.fpscr.val = 0;	/* turn off all fp exceptions */
+
+	if (put_user(regs->gpr[1], (u32 __user *)newsp))
+		goto badframe;
+	regs->gpr[1] = newsp;
 	regs->gpr[3] = sig;
 	regs->gpr[4] = (unsigned long) &rt_sf->info;
 	regs->gpr[5] = (unsigned long) &rt_sf->uc;
 	regs->gpr[6] = (unsigned long) rt_sf;
 	regs->nip = (unsigned long) ka->sa.sa_handler;
 	regs->trap = 0;
+#ifdef CONFIG_PPC64
 	regs->result = 0;
 
 	if (test_thread_flag(TIF_SINGLESTEP))
 		ptrace_notify(SIGTRAP);
-
+#endif
 	return 1;
 
 badframe:
-#if DEBUG_SIG
+#ifdef DEBUG_SIG
 	printk("badframe in handle_rt_signal, regs=%p frame=%p newsp=%lx\n",
 	       regs, frame, newsp);
 #endif
@@ -692,46 +845,50 @@ badframe:
 	return 0;
 }
 
-static long do_setcontext32(struct ucontext32 __user *ucp, struct pt_regs *regs, int sig)
+static int do_setcontext(struct ucontext __user *ucp, struct pt_regs *regs, int sig)
 {
-	compat_sigset_t c_set;
 	sigset_t set;
-	u32 mcp;
+	struct mcontext __user *mcp;
+
+	if (get_sigset_t(&set, &ucp->uc_sigmask))
+		return -EFAULT;
+#ifdef CONFIG_PPC64
+	{
+		u32 cmcp;
 
-	if (__copy_from_user(&c_set, &ucp->uc_sigmask, sizeof(c_set))
-	    || __get_user(mcp, &ucp->uc_regs))
+		if (__get_user(cmcp, &ucp->uc_regs))
+			return -EFAULT;
+		mcp = (struct mcontext __user *)(u64)cmcp;
+	}
+#else
+	if (__get_user(mcp, &ucp->uc_regs))
 		return -EFAULT;
-	sigset_from_compat(&set, &c_set);
+#endif
 	restore_sigmask(&set);
-	if (restore_user_regs(regs, (struct mcontext32 __user *)(u64)mcp, sig))
+	if (restore_user_regs(regs, mcp, sig))
 		return -EFAULT;
 
 	return 0;
 }
 
-/*
- * Handle {get,set,swap}_context operations for 32 bits processes
- */
-
-long sys32_swapcontext(struct ucontext32 __user *old_ctx,
-		       struct ucontext32 __user *new_ctx,
+long sys_swapcontext(struct ucontext __user *old_ctx,
+		       struct ucontext __user *new_ctx,
 		       int ctx_size, int r6, int r7, int r8, struct pt_regs *regs)
 {
 	unsigned char tmp;
-	compat_sigset_t c_set;
 
 	/* Context size is for future use. Right now, we only make sure
 	 * we are passed something we understand
 	 */
-	if (ctx_size < sizeof(struct ucontext32))
+	if (ctx_size < sizeof(struct ucontext))
 		return -EINVAL;
 
 	if (old_ctx != NULL) {
-		compat_from_sigset(&c_set, &current->blocked);
 		if (!access_ok(VERIFY_WRITE, old_ctx, sizeof(*old_ctx))
 		    || save_user_regs(regs, &old_ctx->uc_mcontext, 0)
-		    || __copy_to_user(&old_ctx->uc_sigmask, &c_set, sizeof(c_set))
-		    || __put_user((u32)(u64)&old_ctx->uc_mcontext, &old_ctx->uc_regs))
+		    || put_sigset_t(&old_ctx->uc_sigmask, &current->blocked)
+		    || __put_user(to_user_ptr(&old_ctx->uc_mcontext),
+			    &old_ctx->uc_regs))
 			return -EFAULT;
 	}
 	if (new_ctx == NULL)
@@ -752,27 +909,26 @@ long sys32_swapcontext(struct ucontext32 __user *old_ctx,
 	 * or if another thread unmaps the region containing the context.
 	 * We kill the task with a SIGSEGV in this situation.
 	 */
-	if (do_setcontext32(new_ctx, regs, 0))
+	if (do_setcontext(new_ctx, regs, 0))
 		do_exit(SIGSEGV);
-
+	sigreturn_exit(regs);
+	/* doesn't actually return back to here */
 	return 0;
 }
 
-long sys32_rt_sigreturn(int r3, int r4, int r5, int r6, int r7, int r8,
+long sys_rt_sigreturn(int r3, int r4, int r5, int r6, int r7, int r8,
 		     struct pt_regs *regs)
 {
-	struct rt_sigframe32 __user *rt_sf;
-	int ret;
-
+	struct rt_sigframe __user *rt_sf;
 
 	/* Always make any pending restarted system calls return -EINTR */
 	current_thread_info()->restart_block.fn = do_no_restart_syscall;
 
-	rt_sf = (struct rt_sigframe32 __user *)
-		(regs->gpr[1] + __SIGNAL_FRAMESIZE32 + 16);
+	rt_sf = (struct rt_sigframe __user *)
+		(regs->gpr[1] + __SIGNAL_FRAMESIZE + 16);
 	if (!access_ok(VERIFY_READ, rt_sf, sizeof(*rt_sf)))
 		goto bad;
-	if (do_setcontext32(&rt_sf->uc, regs, 1))
+	if (do_setcontext(&rt_sf->uc, regs, 1))
 		goto bad;
 
 	/*
@@ -781,54 +937,154 @@ long sys32_rt_sigreturn(int r3, int r4, int r5, int r6, int r7, int r8,
 	 * signal return.  But other architectures do this and we have
 	 * always done it up until now so it is probably better not to
 	 * change it.  -- paulus
-	 * We use the sys32_ version that does the 32/64 bits conversion
+	 */
+#ifdef CONFIG_PPC64
+	/*
+	 * We use the compat_sys_ version that does the 32/64 bits conversion
 	 * and takes userland pointer directly. What about error checking ?
 	 * nobody does any...
 	 */
-       	sys32_sigaltstack((u32)(u64)&rt_sf->uc.uc_stack, 0, 0, 0, 0, 0, regs);
-
-	ret = regs->result;
-
-	return ret;
+	compat_sys_sigaltstack((u32)(u64)&rt_sf->uc.uc_stack, 0, 0, 0, 0, 0, regs);
+	return (int)regs->result;
+#else
+	do_sigaltstack(&rt_sf->uc.uc_stack, NULL, regs->gpr[1]);
+	sigreturn_exit(regs);		/* doesn't return here */
+	return 0;
+#endif
 
  bad:
 	force_sig(SIGSEGV, current);
 	return 0;
 }
 
+#ifdef CONFIG_PPC32
+int sys_debug_setcontext(struct ucontext __user *ctx,
+			 int ndbg, struct sig_dbg_op __user *dbg,
+			 int r6, int r7, int r8,
+			 struct pt_regs *regs)
+{
+	struct sig_dbg_op op;
+	int i;
+	unsigned long new_msr = regs->msr;
+#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+	unsigned long new_dbcr0 = current->thread.dbcr0;
+#endif
+
+	for (i=0; i<ndbg; i++) {
+		if (__copy_from_user(&op, dbg, sizeof(op)))
+			return -EFAULT;
+		switch (op.dbg_type) {
+		case SIG_DBG_SINGLE_STEPPING:
+#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+			if (op.dbg_value) {
+				new_msr |= MSR_DE;
+				new_dbcr0 |= (DBCR0_IDM | DBCR0_IC);
+			} else {
+				new_msr &= ~MSR_DE;
+				new_dbcr0 &= ~(DBCR0_IDM | DBCR0_IC);
+			}
+#else
+			if (op.dbg_value)
+				new_msr |= MSR_SE;
+			else
+				new_msr &= ~MSR_SE;
+#endif
+			break;
+		case SIG_DBG_BRANCH_TRACING:
+#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+			return -EINVAL;
+#else
+			if (op.dbg_value)
+				new_msr |= MSR_BE;
+			else
+				new_msr &= ~MSR_BE;
+#endif
+			break;
+
+		default:
+			return -EINVAL;
+		}
+	}
+
+	/* We wait until here to actually install the values in the
+	   registers so if we fail in the above loop, it will not
+	   affect the contents of these registers.  After this point,
+	   failure is a problem, anyway, and it's very unlikely unless
+	   the user is really doing something wrong. */
+	regs->msr = new_msr;
+#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+	current->thread.dbcr0 = new_dbcr0;
+#endif
+
+	/*
+	 * If we get a fault copying the context into the kernel's
+	 * image of the user's registers, we can't just return -EFAULT
+	 * because the user's registers will be corrupted.  For instance
+	 * the NIP value may have been updated but not some of the
+	 * other registers.  Given that we have done the access_ok
+	 * and successfully read the first and last bytes of the region
+	 * above, this should only happen in an out-of-memory situation
+	 * or if another thread unmaps the region containing the context.
+	 * We kill the task with a SIGSEGV in this situation.
+	 */
+	if (do_setcontext(ctx, regs, 1)) {
+		force_sig(SIGSEGV, current);
+		goto out;
+	}
+
+	/*
+	 * It's not clear whether or why it is desirable to save the
+	 * sigaltstack setting on signal delivery and restore it on
+	 * signal return.  But other architectures do this and we have
+	 * always done it up until now so it is probably better not to
+	 * change it.  -- paulus
+	 */
+	do_sigaltstack(&ctx->uc_stack, NULL, regs->gpr[1]);
+
+	sigreturn_exit(regs);
+	/* doesn't actually return back to here */
+
+ out:
+	return 0;
+}
+#endif
 
 /*
  * OK, we're invoking a handler
  */
-static int handle_signal32(unsigned long sig, struct k_sigaction *ka,
-			    siginfo_t *info, sigset_t *oldset,
-			    struct pt_regs * regs, unsigned long newsp)
+static int handle_signal(unsigned long sig, struct k_sigaction *ka,
+		siginfo_t *info, sigset_t *oldset, struct pt_regs *regs,
+		unsigned long newsp)
 {
-	struct sigcontext32 __user *sc;
-	struct sigregs32 __user *frame;
+	struct sigcontext __user *sc;
+	struct sigregs __user *frame;
 	unsigned long origsp = newsp;
 
 	/* Set up Signal Frame */
-	newsp -= sizeof(struct sigregs32);
-	frame = (struct sigregs32 __user *) newsp;
+	newsp -= sizeof(struct sigregs);
+	frame = (struct sigregs __user *) newsp;
 
 	/* Put a sigcontext on the stack */
 	newsp -= sizeof(*sc);
-	sc = (struct sigcontext32 __user *) newsp;
+	sc = (struct sigcontext __user *) newsp;
 
 	/* create a stack frame for the caller of the handler */
-	newsp -= __SIGNAL_FRAMESIZE32;
+	newsp -= __SIGNAL_FRAMESIZE;
 
 	if (!access_ok(VERIFY_WRITE, (void __user *) newsp, origsp - newsp))
 		goto badframe;
 
 #if _NSIG != 64
-#error "Please adjust handle_signal32()"
+#error "Please adjust handle_signal()"
 #endif
-	if (__put_user((u32)(u64)ka->sa.sa_handler, &sc->handler)
+	if (__put_user(to_user_ptr(ka->sa.sa_handler), &sc->handler)
 	    || __put_user(oldset->sig[0], &sc->oldmask)
+#ifdef CONFIG_PPC64
 	    || __put_user((oldset->sig[0] >> 32), &sc->_unused[3])
-	    || __put_user((u32)(u64)frame, &sc->regs)
+#else
+	    || __put_user(oldset->sig[1], &sc->_unused[3])
+#endif
+	    || __put_user(to_user_ptr(frame), &sc->regs)
 	    || __put_user(sig, &sc->signal))
 		goto badframe;
 
@@ -842,24 +1098,28 @@ static int handle_signal32(unsigned long sig, struct k_sigaction *ka,
 		regs->link = (unsigned long) frame->mctx.tramp;
 	}
 
+	current->thread.fpscr.val = 0;	/* turn off all fp exceptions */
+
 	if (put_user(regs->gpr[1], (u32 __user *)newsp))
 		goto badframe;
-	regs->gpr[1] = (unsigned long) newsp;
+	regs->gpr[1] = newsp;
 	regs->gpr[3] = sig;
 	regs->gpr[4] = (unsigned long) sc;
 	regs->nip = (unsigned long) ka->sa.sa_handler;
 	regs->trap = 0;
+#ifdef CONFIG_PPC64
 	regs->result = 0;
 
 	if (test_thread_flag(TIF_SINGLESTEP))
 		ptrace_notify(SIGTRAP);
+#endif
 
 	return 1;
 
 badframe:
-#if DEBUG_SIG
-	printk("badframe in handle_signal, regs=%p frame=%x newsp=%x\n",
-	       regs, frame, *newspp);
+#ifdef DEBUG_SIG
+	printk("badframe in handle_signal, regs=%p frame=%p newsp=%lx\n",
+	       regs, frame, newsp);
 #endif
 	force_sigsegv(sig, current);
 	return 0;
@@ -868,65 +1128,69 @@ badframe:
 /*
  * Do a signal return; undo the signal stack.
  */
-long sys32_sigreturn(int r3, int r4, int r5, int r6, int r7, int r8,
+long sys_sigreturn(int r3, int r4, int r5, int r6, int r7, int r8,
 		       struct pt_regs *regs)
 {
-	struct sigcontext32 __user *sc;
-	struct sigcontext32 sigctx;
-	struct mcontext32 __user *sr;
+	struct sigcontext __user *sc;
+	struct sigcontext sigctx;
+	struct mcontext __user *sr;
 	sigset_t set;
-	int ret;
 
 	/* Always make any pending restarted system calls return -EINTR */
 	current_thread_info()->restart_block.fn = do_no_restart_syscall;
 
-	sc = (struct sigcontext32 __user *)(regs->gpr[1] + __SIGNAL_FRAMESIZE32);
+	sc = (struct sigcontext __user *)(regs->gpr[1] + __SIGNAL_FRAMESIZE);
 	if (copy_from_user(&sigctx, sc, sizeof(sigctx)))
 		goto badframe;
 
+#ifdef CONFIG_PPC64
 	/*
 	 * Note that PPC32 puts the upper 32 bits of the sigmask in the
 	 * unused part of the signal stackframe
 	 */
 	set.sig[0] = sigctx.oldmask + ((long)(sigctx._unused[3]) << 32);
+#else
+	set.sig[0] = sigctx.oldmask;
+	set.sig[1] = sigctx._unused[3];
+#endif
 	restore_sigmask(&set);
 
-	sr = (struct mcontext32 __user *)(u64)sigctx.regs;
+	sr = (struct mcontext __user *)from_user_ptr(sigctx.regs);
 	if (!access_ok(VERIFY_READ, sr, sizeof(*sr))
 	    || restore_user_regs(regs, sr, 1))
 		goto badframe;
 
-	ret = regs->result;
-	return ret;
+#ifdef CONFIG_PPC64
+	return (int)regs->result;
+#else
+	sigreturn_exit(regs);		/* doesn't return */
+	return 0;
+#endif
 
 badframe:
 	force_sig(SIGSEGV, current);
 	return 0;
 }
 
-
-
-/*
- *  Start of do_signal32 routine
- *
- *   This routine gets control when a pending signal needs to be processed
- *     in the 32 bit target thread -
- *
- *   It handles both rt and non-rt signals
- */
-
 /*
  * Note that 'init' is a special process: it doesn't get signals it doesn't
  * want to handle. Thus you cannot kill init even with a SIGKILL even by
  * mistake.
  */
-
-int do_signal32(sigset_t *oldset, struct pt_regs *regs)
+int do_signal(sigset_t *oldset, struct pt_regs *regs)
 {
 	siginfo_t info;
+	struct k_sigaction ka;
 	unsigned int frame, newsp;
 	int signr, ret;
-	struct k_sigaction ka;
+
+#ifdef CONFIG_PPC32
+	if (try_to_freeze()) {
+		signr = 0;
+		if (!signal_pending(current))
+			goto no_signal;
+	}
+#endif
 
 	if (!oldset)
 		oldset = &current->blocked;
@@ -934,7 +1198,9 @@ int do_signal32(sigset_t *oldset, struct pt_regs *regs)
 	newsp = frame = 0;
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
-
+#ifdef CONFIG_PPC32
+no_signal:
+#endif
 	if (TRAP(regs) == 0x0C00		/* System Call! */
 	    && regs->ccr & 0x10000000		/* error signalled */
 	    && ((ret = regs->gpr[3]) == ERESTARTSYS
@@ -964,12 +1230,13 @@ int do_signal32(sigset_t *oldset, struct pt_regs *regs)
 		return 0;		/* no signals delivered */
 
 	if ((ka.sa.sa_flags & SA_ONSTACK) && current->sas_ss_size
-	    && (!on_sig_stack(regs->gpr[1])))
-		newsp = (current->sas_ss_sp + current->sas_ss_size);
+	    && !on_sig_stack(regs->gpr[1]))
+		newsp = current->sas_ss_sp + current->sas_ss_size;
 	else
 		newsp = regs->gpr[1];
 	newsp &= ~0xfUL;
 
+#ifdef CONFIG_PPC64
 	/*
 	 * Reenable the DABR before delivering the signal to
 	 * user space. The DABR will have been cleared if it
@@ -977,12 +1244,13 @@ int do_signal32(sigset_t *oldset, struct pt_regs *regs)
 	 */
 	if (current->thread.dabr)
 		set_dabr(current->thread.dabr);
+#endif
 
 	/* Whee!  Actually deliver the signal.  */
 	if (ka.sa.sa_flags & SA_SIGINFO)
-		ret = handle_rt_signal32(signr, &ka, &info, oldset, regs, newsp);
+		ret = handle_rt_signal(signr, &ka, &info, oldset, regs, newsp);
 	else
-		ret = handle_signal32(signr, &ka, &info, oldset, regs, newsp);
+		ret = handle_signal(signr, &ka, &info, oldset, regs, newsp);
 
 	if (ret) {
 		spin_lock_irq(&current->sighand->siglock);
diff --git a/arch/ppc64/kernel/signal.c b/arch/powerpc/kernel/signal_64.c
index 347112cca3c0..1decf2785530 100644
--- a/arch/ppc64/kernel/signal.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -33,7 +33,6 @@
 #include <asm/ucontext.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
-#include <asm/ppcdebug.h>
 #include <asm/unistd.h>
 #include <asm/cacheflush.h>
 #include <asm/vdso.h>
@@ -132,9 +131,6 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
 
 	flush_fp_to_thread(current);
 
-	/* Make sure signal doesn't get spurrious FP exceptions */
-	current->thread.fpscr = 0;
-
 #ifdef CONFIG_ALTIVEC
 	err |= __put_user(v_regs, &sc->v_regs);
 
@@ -424,6 +420,9 @@ static int setup_rt_frame(int signr, struct k_sigaction *ka, siginfo_t *info,
 	if (err)
 		goto badframe;
 
+	/* Make sure signal handler doesn't get spurious FP exceptions */
+	current->thread.fpscr.val = 0;
+
 	/* Set up to return from userspace. */
 	if (vdso64_rt_sigtramp && current->thread.vdso_base) {
 		regs->link = current->thread.vdso_base + vdso64_rt_sigtramp;
diff --git a/arch/ppc64/kernel/smp-tbsync.c b/arch/powerpc/kernel/smp-tbsync.c
index 7d8ec9996b3e..9adef3bddad4 100644
--- a/arch/ppc64/kernel/smp-tbsync.c
+++ b/arch/powerpc/kernel/smp-tbsync.c
@@ -22,11 +22,11 @@ enum {
 };
 
 static struct {
-	volatile long		tb;
-	volatile long		mark;
+	volatile u64		tb;
+	volatile u64		mark;
 	volatile int		cmd;
 	volatile int		handshake;
-	int			filler[3];
+	int			filler[2];
 
 	volatile int		ack;
 	int			filler2[7];
@@ -36,89 +36,80 @@ static struct {
 
 static volatile int		running;
 
-static void __devinit
-enter_contest( long mark, long add )
+static void __devinit enter_contest(u64 mark, long add)
 {
-	while( (long)(mftb() - mark) < 0 )
+	while (get_tb() < mark)
 		tbsync->race_result = add;
 }
 
-void __devinit
-smp_generic_take_timebase( void )
+void __devinit smp_generic_take_timebase(void)
 {
 	int cmd;
-	long tb;
+	u64 tb;
 
 	local_irq_disable();
-	while( !running )
-		;
+	while (!running)
+		barrier();
 	rmb();
 
-	for( ;; ) {
+	for (;;) {
 		tbsync->ack = 1;
-		while( !tbsync->handshake )
-			;
+		while (!tbsync->handshake)
+			barrier();
 		rmb();
 
 		cmd = tbsync->cmd;
 		tb = tbsync->tb;
+		mb();
 		tbsync->ack = 0;
-		if( cmd == kExit )
-			return;
-
-		if( cmd == kSetAndTest ) {
-			while( tbsync->handshake )
-				;
-			asm volatile ("mttbl %0" :: "r" (tb & 0xfffffffful) );
-			asm volatile ("mttbu %0" :: "r" (tb >> 32) );
-		} else {
-			while( tbsync->handshake )
-				;
-		}
-		enter_contest( tbsync->mark, -1 );
+		if (cmd == kExit)
+			break;
+
+		while (tbsync->handshake)
+			barrier();
+		if (cmd == kSetAndTest)
+			set_tb(tb >> 32, tb & 0xfffffffful);
+		enter_contest(tbsync->mark, -1);
 	}
 	local_irq_enable();
 }
 
-static int __devinit
-start_contest( int cmd, long offset, long num )
+static int __devinit start_contest(int cmd, long offset, int num)
 {
 	int i, score=0;
-	long tb, mark;
+	u64 tb;
+	long mark;
 
 	tbsync->cmd = cmd;
 
 	local_irq_disable();
-	for( i=-3; i<num; ) {
-		tb = (long)mftb() + 400;
+	for (i = -3; i < num; ) {
+		tb = get_tb() + 400;
 		tbsync->tb = tb + offset;
 		tbsync->mark = mark = tb + 400;
 
 		wmb();
 
 		tbsync->handshake = 1;
-		while( tbsync->ack )
-			;
+		while (tbsync->ack)
+			barrier();
 
-		while( (long)(mftb() - tb) <= 0 )
-			;
+		while (get_tb() <= tb)
+			barrier();
 		tbsync->handshake = 0;
-		enter_contest( mark, 1 );
+		enter_contest(mark, 1);
 
-		while( !tbsync->ack )
-			;
+		while (!tbsync->ack)
+			barrier();
 
-	       	if ((tbsync->tb ^ (long)mftb()) & 0x8000000000000000ul)
-			continue;
-		if( i++ > 0 )
+		if (i++ > 0)
 			score += tbsync->race_result;
 	}
 	local_irq_enable();
 	return score;
 }
 
-void __devinit
-smp_generic_give_timebase( void )
+void __devinit smp_generic_give_timebase(void)
 {
 	int i, score, score2, old, min=0, max=5000, offset=1000;
 
@@ -130,14 +121,14 @@ smp_generic_give_timebase( void )
 	mb();
 	running = 1;
 
-	while( !tbsync->ack )
-		;
+	while (!tbsync->ack)
+		barrier();
 
 	printk("Got ack\n");
 
 	/* binary search */
-	for( old=-1 ; old != offset ; offset=(min+max)/2 ) {
-		score = start_contest( kSetAndTest, offset, NUM_ITER );
+	for (old = -1; old != offset ; offset = (min+max) / 2) {
+		score = start_contest(kSetAndTest, offset, NUM_ITER);
 
 		printk("score %d, offset %d\n", score, offset );
 
@@ -147,21 +138,22 @@ smp_generic_give_timebase( void )
 			min = offset;
 		old = offset;
 	}
-	score = start_contest( kSetAndTest, min, NUM_ITER );
-	score2 = start_contest( kSetAndTest, max, NUM_ITER );
+	score = start_contest(kSetAndTest, min, NUM_ITER);
+	score2 = start_contest(kSetAndTest, max, NUM_ITER);
 
-	printk( "Min %d (score %d), Max %d (score %d)\n", min, score, max, score2 );
-	score = abs( score );
-	score2 = abs( score2 );
+	printk("Min %d (score %d), Max %d (score %d)\n",
+	       min, score, max, score2);
+	score = abs(score);
+	score2 = abs(score2);
 	offset = (score < score2) ? min : max;
 
 	/* guard against inaccurate mttb */
-	for( i=0; i<10; i++ ) {
-		start_contest( kSetAndTest, offset, NUM_ITER/10 );
+	for (i = 0; i < 10; i++) {
+		start_contest(kSetAndTest, offset, NUM_ITER/10);
 
-		if( (score2=start_contest(kTest, offset, NUM_ITER)) < 0 )
+		if ((score2 = start_contest(kTest, offset, NUM_ITER)) < 0)
 			score2 = -score2;
-		if( score2 <= score || score2 < 20 )
+		if (score2 <= score || score2 < 20)
 			break;
 	}
 	printk("Final offset: %d (%d/%d)\n", offset, score2, NUM_ITER );
@@ -170,10 +162,10 @@ smp_generic_give_timebase( void )
 	tbsync->cmd = kExit;
 	wmb();
 	tbsync->handshake = 1;
-	while( tbsync->ack )
-		;
+	while (tbsync->ack)
+		barrier();
 	tbsync->handshake = 0;
-	kfree( tbsync );
+	kfree(tbsync);
 	tbsync = NULL;
 	running = 0;
 }
diff --git a/arch/ppc64/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 793b562da653..30374d2f88e5 100644
--- a/arch/ppc64/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -39,21 +39,26 @@
 #include <asm/pgtable.h>
 #include <asm/prom.h>
 #include <asm/smp.h>
-#include <asm/paca.h>
 #include <asm/time.h>
 #include <asm/machdep.h>
 #include <asm/cputable.h>
 #include <asm/system.h>
-#include <asm/abs_addr.h>
-
-#include "mpic.h"
+#include <asm/mpic.h>
+#include <asm/vdso_datapage.h>
+#ifdef CONFIG_PPC64
+#include <asm/paca.h>
+#endif
 
 #ifdef DEBUG
+#include <asm/udbg.h>
 #define DBG(fmt...) udbg_printf(fmt)
 #else
 #define DBG(fmt...)
 #endif
 
+int smp_hw_index[NR_CPUS];
+struct thread_info *secondary_ti;
+
 cpumask_t cpu_possible_map = CPU_MASK_NONE;
 cpumask_t cpu_online_map = CPU_MASK_NONE;
 cpumask_t cpu_sibling_map[NR_CPUS] = { [0 ... NR_CPUS-1] = CPU_MASK_NONE };
@@ -61,6 +66,7 @@ cpumask_t cpu_sibling_map[NR_CPUS] = { [0 ... NR_CPUS-1] = CPU_MASK_NONE };
 EXPORT_SYMBOL(cpu_online_map);
 EXPORT_SYMBOL(cpu_possible_map);
 
+/* SMP operations for this machine */
 struct smp_ops_t *smp_ops;
 
 static volatile unsigned int cpu_callin_map[NR_CPUS];
@@ -70,28 +76,6 @@ void smp_call_function_interrupt(void);
 int smt_enabled_at_boot = 1;
 
 #ifdef CONFIG_MPIC
-void smp_mpic_message_pass(int target, int msg)
-{
-	/* make sure we're sending something that translates to an IPI */
-	if ( msg > 0x3 ){
-		printk("SMP %d: smp_message_pass: unknown msg %d\n",
-		       smp_processor_id(), msg);
-		return;
-	}
-	switch ( target )
-	{
-	case MSG_ALL:
-		mpic_send_ipi(msg, 0xffffffff);
-		break;
-	case MSG_ALL_BUT_SELF:
-		mpic_send_ipi(msg, 0xffffffff & ~(1 << smp_processor_id()));
-		break;
-	default:
-		mpic_send_ipi(msg, 1 << target);
-		break;
-	}
-}
-
 int __init smp_mpic_probe(void)
 {
 	int nr_cpus;
@@ -112,7 +96,9 @@ void __devinit smp_mpic_setup_cpu(int cpu)
 {
 	mpic_setup_this_cpu();
 }
+#endif /* CONFIG_MPIC */
 
+#ifdef CONFIG_PPC64
 void __devinit smp_generic_kick_cpu(int nr)
 {
 	BUG_ON(nr < 0 || nr >= NR_CPUS);
@@ -125,23 +111,7 @@ void __devinit smp_generic_kick_cpu(int nr)
 	paca[nr].cpu_start = 1;
 	smp_mb();
 }
-
-#endif /* CONFIG_MPIC */
-
-static void __init smp_space_timers(unsigned int max_cpus)
-{
-	int i;
-	unsigned long offset = tb_ticks_per_jiffy / max_cpus;
-	unsigned long previous_tb = paca[boot_cpuid].next_jiffy_update_tb;
-
-	for_each_cpu(i) {
-		if (i != boot_cpuid) {
-			paca[i].next_jiffy_update_tb =
-				previous_tb + offset;
-			previous_tb = paca[i].next_jiffy_update_tb;
-		}
-	}
-}
+#endif
 
 void smp_message_recv(int msg, struct pt_regs *regs)
 {
@@ -149,15 +119,10 @@ void smp_message_recv(int msg, struct pt_regs *regs)
 	case PPC_MSG_CALL_FUNCTION:
 		smp_call_function_interrupt();
 		break;
-	case PPC_MSG_RESCHEDULE: 
+	case PPC_MSG_RESCHEDULE:
 		/* XXX Do we have to do this? */
 		set_need_resched();
 		break;
-#if 0
-	case PPC_MSG_MIGRATE_TASK:
-		/* spare */
-		break;
-#endif
 #ifdef CONFIG_DEBUGGER
 	case PPC_MSG_DEBUGGER_BREAK:
 		debugger_ipi(regs);
@@ -209,8 +174,8 @@ static struct call_data_struct {
 	int wait;
 } *call_data;
 
-/* delay of at least 8 seconds on 1GHz cpu */
-#define SMP_CALL_TIMEOUT (1UL << (30 + 3))
+/* delay of at least 8 seconds */
+#define SMP_CALL_TIMEOUT	8
 
 /*
  * This function sends a 'generic call function' IPI to all other CPUs
@@ -232,7 +197,7 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
 { 
 	struct call_data_struct data;
 	int ret = -1, cpus;
-	unsigned long timeout;
+	u64 timeout;
 
 	/* Can deadlock when called with interrupts disabled */
 	WARN_ON(irqs_disabled());
@@ -258,11 +223,12 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
 	/* Send a message to all other CPUs and wait for them to respond */
 	smp_ops->message_pass(MSG_ALL_BUT_SELF, PPC_MSG_CALL_FUNCTION);
 
+	timeout = get_tb() + (u64) SMP_CALL_TIMEOUT * tb_ticks_per_sec;
+
 	/* Wait for response */
-	timeout = SMP_CALL_TIMEOUT;
 	while (atomic_read(&data.started) != cpus) {
 		HMT_low();
-		if (--timeout == 0) {
+		if (get_tb() >= timeout) {
 			printk("smp_call_function on cpu %d: other cpus not "
 			       "responding (%d)\n", smp_processor_id(),
 			       atomic_read(&data.started));
@@ -272,10 +238,9 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
 	}
 
 	if (wait) {
-		timeout = SMP_CALL_TIMEOUT;
 		while (atomic_read(&data.finished) != cpus) {
 			HMT_low();
-			if (--timeout == 0) {
+			if (get_tb() >= timeout) {
 				printk("smp_call_function on cpu %d: other "
 				       "cpus not finishing (%d/%d)\n",
 				       smp_processor_id(),
@@ -289,7 +254,7 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
 
 	ret = 0;
 
-out:
+ out:
 	call_data = NULL;
 	HMT_medium();
 	spin_unlock(&call_lock);
@@ -351,8 +316,11 @@ static void __init smp_create_idle(unsigned int cpu)
 	p = fork_idle(cpu);
 	if (IS_ERR(p))
 		panic("failed fork for CPU %u: %li", cpu, PTR_ERR(p));
+#ifdef CONFIG_PPC64
 	paca[cpu].__current = p;
+#endif
 	current_set[cpu] = p->thread_info;
+	p->thread_info->cpu = cpu;
 }
 
 void __init smp_prepare_cpus(unsigned int max_cpus)
@@ -371,18 +339,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	smp_store_cpu_info(boot_cpuid);
 	cpu_callin_map[boot_cpuid] = 1;
 
-#ifndef CONFIG_PPC_ISERIES
-	paca[boot_cpuid].next_jiffy_update_tb = tb_last_stamp = get_tb();
-
-	/*
-	 * Should update do_gtod.stamp_xsec.
-	 * For now we leave it which means the time can be some
-	 * number of msecs off until someone does a settimeofday()
-	 */
-	do_gtod.varp->tb_orig_stamp = tb_last_stamp;
-	systemcfg->tb_orig_stamp = tb_last_stamp;
-#endif
-
 	max_cpus = smp_ops->probe();
  
 	smp_space_timers(max_cpus);
@@ -397,8 +353,9 @@ void __devinit smp_prepare_boot_cpu(void)
 	BUG_ON(smp_processor_id() != boot_cpuid);
 
 	cpu_set(boot_cpuid, cpu_online_map);
-
+#ifdef CONFIG_PPC64
 	paca[boot_cpuid].__current = current;
+#endif
 	current_set[boot_cpuid] = current->thread_info;
 }
 
@@ -413,9 +370,11 @@ int generic_cpu_disable(void)
 	if (cpu == boot_cpuid)
 		return -EBUSY;
 
-	systemcfg->processorCount--;
 	cpu_clear(cpu, cpu_online_map);
+#ifdef CONFIG_PPC64
+	vdso_data->processorCount--;
 	fixup_irqs(cpu_online_map);
+#endif
 	return 0;
 }
 
@@ -433,9 +392,11 @@ int generic_cpu_enable(unsigned int cpu)
 	while (!cpu_online(cpu))
 		cpu_relax();
 
+#ifdef CONFIG_PPC64
 	fixup_irqs(cpu_online_map);
 	/* counter the irq disable in fixup_irqs */
 	local_irq_enable();
+#endif
 	return 0;
 }
 
@@ -464,7 +425,9 @@ void generic_mach_cpu_die(void)
 	while (__get_cpu_var(cpu_state) != CPU_UP_PREPARE)
 		cpu_relax();
 
+#ifdef CONFIG_PPC64
 	flush_tlb_pending();
+#endif
 	cpu_set(cpu, cpu_online_map);
 	local_irq_enable();
 }
@@ -482,13 +445,16 @@ int __devinit __cpu_up(unsigned int cpu)
 {
 	int c;
 
+	secondary_ti = current_set[cpu];
 	if (!cpu_enable(cpu))
 		return 0;
 
 	if (smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu))
 		return -EINVAL;
 
+#ifdef CONFIG_PPC64
 	paca[cpu].default_decr = tb_ticks_per_jiffy;
+#endif
 
 	/* Make sure callin-map entry is 0 (can be leftover a CPU
 	 * hotplug
@@ -551,7 +517,8 @@ int __devinit start_secondary(void *unused)
 	current->active_mm = &init_mm;
 
 	smp_store_cpu_info(cpu);
-	set_dec(paca[cpu].default_decr);
+	set_dec(tb_ticks_per_jiffy);
+	preempt_disable();
 	cpu_callin_map[cpu] = 1;
 
 	smp_ops->setup_cpu(cpu);
diff --git a/arch/ppc64/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c
index e93c13458910..9c921d1c4084 100644
--- a/arch/ppc64/kernel/sys_ppc32.c
+++ b/arch/powerpc/kernel/sys_ppc32.c
@@ -52,9 +52,7 @@
 #include <asm/semaphore.h>
 #include <asm/time.h>
 #include <asm/mmu_context.h>
-#include <asm/systemcfg.h>
-
-#include "pci.h"
+#include <asm/ppc-pci.h>
 
 /* readdir & getdents */
 #define NAME_OFFSET(de) ((int) ((de)->d_name - (char __user *) (de)))
@@ -114,96 +112,6 @@ out:
 	return error;
 }
 
-struct linux_dirent32 {
-	u32		d_ino;
-	u32		d_off;
-	unsigned short	d_reclen;
-	char		d_name[1];
-};
-
-struct getdents_callback32 {
-	struct linux_dirent32 __user * current_dir;
-	struct linux_dirent32 __user * previous;
-	int count;
-	int error;
-};
-
-static int filldir(void * __buf, const char * name, int namlen, off_t offset,
-		   ino_t ino, unsigned int d_type)
-{
-	struct linux_dirent32 __user * dirent;
-	struct getdents_callback32 * buf = (struct getdents_callback32 *) __buf;
-	int reclen = ROUND_UP(NAME_OFFSET(dirent) + namlen + 2);
-
-	buf->error = -EINVAL;	/* only used if we fail.. */
-	if (reclen > buf->count)
-		return -EINVAL;
-	dirent = buf->previous;
-	if (dirent) {
-		if (__put_user(offset, &dirent->d_off))
-			goto efault;
-	}
-	dirent = buf->current_dir;
-	if (__put_user(ino, &dirent->d_ino))
-		goto efault;
-	if (__put_user(reclen, &dirent->d_reclen))
-		goto efault;
-	if (copy_to_user(dirent->d_name, name, namlen))
-		goto efault;
-	if (__put_user(0, dirent->d_name + namlen))
-		goto efault;
-	if (__put_user(d_type, (char __user *) dirent + reclen - 1))
-		goto efault;
-	buf->previous = dirent;
-	dirent = (void __user *)dirent + reclen;
-	buf->current_dir = dirent;
-	buf->count -= reclen;
-	return 0;
-efault:
-	buf->error = -EFAULT;
-	return -EFAULT;
-}
-
-asmlinkage long sys32_getdents(unsigned int fd, struct linux_dirent32 __user *dirent,
-		    unsigned int count)
-{
-	struct file * file;
-	struct linux_dirent32 __user * lastdirent;
-	struct getdents_callback32 buf;
-	int error;
-
-	error = -EFAULT;
-	if (!access_ok(VERIFY_WRITE, dirent, count))
-		goto out;
-
-	error = -EBADF;
-	file = fget(fd);
-	if (!file)
-		goto out;
-
-	buf.current_dir = dirent;
-	buf.previous = NULL;
-	buf.count = count;
-	buf.error = 0;
-
-	error = vfs_readdir(file, (filldir_t)filldir, &buf);
-	if (error < 0)
-		goto out_putf;
-	error = buf.error;
-	lastdirent = buf.previous;
-	if (lastdirent) {
-		if (put_user(file->f_pos, &lastdirent->d_off))
-			error = -EFAULT;
-		else
-			error = count - buf.count;
-	}
-
-out_putf:
-	fput(file);
-out:
-	return error;
-}
-
 asmlinkage long ppc32_select(u32 n, compat_ulong_t __user *inp,
 		compat_ulong_t __user *outp, compat_ulong_t __user *exp,
 		compat_uptr_t tvp_x)
@@ -248,7 +156,7 @@ int cp_compat_stat(struct kstat *stat, struct compat_stat __user *statbuf)
  * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode)
  * and the register representation of a signed int (msr in 64-bit mode) is performed.
  */
-asmlinkage long sys32_sysfs(u32 option, u32 arg1, u32 arg2)
+asmlinkage long compat_sys_sysfs(u32 option, u32 arg1, u32 arg2)
 {
 	return sys_sysfs((int)option, arg1, arg2);
 }
@@ -270,7 +178,7 @@ struct timex32 {
 extern int do_adjtimex(struct timex *);
 extern void ppc_adjtimex(void);
 
-asmlinkage long sys32_adjtimex(struct timex32 __user *utp)
+asmlinkage long compat_sys_adjtimex(struct timex32 __user *utp)
 {
 	struct timex txc;
 	int ret;
@@ -329,7 +237,7 @@ asmlinkage long sys32_adjtimex(struct timex32 __user *utp)
 	return ret;
 }
 
-asmlinkage long sys32_pause(void)
+asmlinkage long compat_sys_pause(void)
 {
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -375,7 +283,7 @@ struct sysinfo32 {
 	char _f[20-2*sizeof(int)-sizeof(int)];
 };
 
-asmlinkage long sys32_sysinfo(struct sysinfo32 __user *info)
+asmlinkage long compat_sys_sysinfo(struct sysinfo32 __user *info)
 {
 	struct sysinfo s;
 	int ret, err;
@@ -432,7 +340,7 @@ asmlinkage long sys32_sysinfo(struct sysinfo32 __user *info)
    sorts of things, like timeval and itimerval.  */
 extern struct timezone sys_tz;
 
-asmlinkage long sys32_gettimeofday(struct compat_timeval __user *tv, struct timezone __user *tz)
+asmlinkage long compat_sys_gettimeofday(struct compat_timeval __user *tv, struct timezone __user *tz)
 {
 	if (tv) {
 		struct timeval ktv;
@@ -450,7 +358,7 @@ asmlinkage long sys32_gettimeofday(struct compat_timeval __user *tv, struct time
 
 
 
-asmlinkage long sys32_settimeofday(struct compat_timeval __user *tv, struct timezone __user *tz)
+asmlinkage long compat_sys_settimeofday(struct compat_timeval __user *tv, struct timezone __user *tz)
 {
 	struct timespec kts;
 	struct timezone ktz;
@@ -468,7 +376,7 @@ asmlinkage long sys32_settimeofday(struct compat_timeval __user *tv, struct time
 }
 
 #ifdef CONFIG_SYSVIPC
-long sys32_ipc(u32 call, u32 first, u32 second, u32 third, compat_uptr_t ptr,
+long compat_sys_ipc(u32 call, u32 first, u32 second, u32 third, compat_uptr_t ptr,
 	       u32 fifth)
 {
 	int version;
@@ -539,7 +447,7 @@ long sys32_ipc(u32 call, u32 first, u32 second, u32 third, compat_uptr_t ptr,
  * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode)
  * and the register representation of a signed int (msr in 64-bit mode) is performed.
  */
-asmlinkage long sys32_sendfile(u32 out_fd, u32 in_fd, compat_off_t __user * offset, u32 count)
+asmlinkage long compat_sys_sendfile(u32 out_fd, u32 in_fd, compat_off_t __user * offset, u32 count)
 {
 	mm_segment_t old_fs = get_fs();
 	int ret;
@@ -561,7 +469,7 @@ asmlinkage long sys32_sendfile(u32 out_fd, u32 in_fd, compat_off_t __user * offs
 	return ret;
 }
 
-asmlinkage int sys32_sendfile64(int out_fd, int in_fd, compat_loff_t __user *offset, s32 count)
+asmlinkage int compat_sys_sendfile64(int out_fd, int in_fd, compat_loff_t __user *offset, s32 count)
 {
 	mm_segment_t old_fs = get_fs();
 	int ret;
@@ -583,7 +491,7 @@ asmlinkage int sys32_sendfile64(int out_fd, int in_fd, compat_loff_t __user *off
 	return ret;
 }
 
-long sys32_execve(unsigned long a0, unsigned long a1, unsigned long a2,
+long compat_sys_execve(unsigned long a0, unsigned long a1, unsigned long a2,
 		  unsigned long a3, unsigned long a4, unsigned long a5,
 		  struct pt_regs *regs)
 {
@@ -610,58 +518,12 @@ out:
 	return error;
 }
 
-/* Set up a thread for executing a new program. */
-void start_thread32(struct pt_regs* regs, unsigned long nip, unsigned long sp)
-{
-	set_fs(USER_DS);
-
-	/*
-	 * If we exec out of a kernel thread then thread.regs will not be
-	 * set. Do it now.
-	 */
-	if (!current->thread.regs) {
-		unsigned long childregs = (unsigned long)current->thread_info +
-						THREAD_SIZE;
-		childregs -= sizeof(struct pt_regs);
-		current->thread.regs = (struct pt_regs *)childregs;
-	}
-
-	/*
-	 * ELF_PLAT_INIT already clears all registers but it also sets r2.
-	 * So just clear r2 here.
-	 */
-	regs->gpr[2] = 0;
-
-	regs->nip = nip;
-	regs->gpr[1] = sp;
-	regs->msr = MSR_USER32;
-#ifndef CONFIG_SMP
-	if (last_task_used_math == current)
-		last_task_used_math = 0;
-#endif /* CONFIG_SMP */
-	current->thread.fpscr = 0;
-	memset(current->thread.fpr, 0, sizeof(current->thread.fpr));
-#ifdef CONFIG_ALTIVEC
-#ifndef CONFIG_SMP
-	if (last_task_used_altivec == current)
-		last_task_used_altivec = 0;
-#endif /* CONFIG_SMP */
-	memset(current->thread.vr, 0, sizeof(current->thread.vr));
-	current->thread.vscr.u[0] = 0;
-	current->thread.vscr.u[1] = 0;
-	current->thread.vscr.u[2] = 0;
-	current->thread.vscr.u[3] = 0x00010000; /* Java mode disabled */
-	current->thread.vrsave = 0;
-	current->thread.used_vr = 0;
-#endif /* CONFIG_ALTIVEC */
-}
-
 /* Note: it is necessary to treat option as an unsigned int, 
  * with the corresponding cast to a signed int to insure that the 
  * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode)
  * and the register representation of a signed int (msr in 64-bit mode) is performed.
  */
-asmlinkage long sys32_prctl(u32 option, u32 arg2, u32 arg3, u32 arg4, u32 arg5)
+asmlinkage long compat_sys_prctl(u32 option, u32 arg2, u32 arg3, u32 arg4, u32 arg5)
 {
 	return sys_prctl((int)option,
 			 (unsigned long) arg2,
@@ -675,7 +537,7 @@ asmlinkage long sys32_prctl(u32 option, u32 arg2, u32 arg3, u32 arg4, u32 arg5)
  * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode)
  * and the register representation of a signed int (msr in 64-bit mode) is performed.
  */
-asmlinkage long sys32_sched_rr_get_interval(u32 pid, struct compat_timespec __user *interval)
+asmlinkage long compat_sys_sched_rr_get_interval(u32 pid, struct compat_timespec __user *interval)
 {
 	struct timespec t;
 	int ret;
@@ -690,7 +552,7 @@ asmlinkage long sys32_sched_rr_get_interval(u32 pid, struct compat_timespec __us
 	return ret;
 }
 
-asmlinkage int sys32_pciconfig_read(u32 bus, u32 dfn, u32 off, u32 len, u32 ubuf)
+asmlinkage int compat_sys_pciconfig_read(u32 bus, u32 dfn, u32 off, u32 len, u32 ubuf)
 {
 	return sys_pciconfig_read((unsigned long) bus,
 				  (unsigned long) dfn,
@@ -699,7 +561,7 @@ asmlinkage int sys32_pciconfig_read(u32 bus, u32 dfn, u32 off, u32 len, u32 ubuf
 				  compat_ptr(ubuf));
 }
 
-asmlinkage int sys32_pciconfig_write(u32 bus, u32 dfn, u32 off, u32 len, u32 ubuf)
+asmlinkage int compat_sys_pciconfig_write(u32 bus, u32 dfn, u32 off, u32 len, u32 ubuf)
 {
 	return sys_pciconfig_write((unsigned long) bus,
 				   (unsigned long) dfn,
@@ -708,7 +570,7 @@ asmlinkage int sys32_pciconfig_write(u32 bus, u32 dfn, u32 off, u32 len, u32 ubu
 				   compat_ptr(ubuf));
 }
 
-asmlinkage int sys32_pciconfig_iobase(u32 which, u32 in_bus, u32 in_devfn)
+asmlinkage int compat_sys_pciconfig_iobase(u32 which, u32 in_bus, u32 in_devfn)
 {
 	return sys_pciconfig_iobase(which, in_bus, in_devfn);
 }
@@ -719,7 +581,7 @@ asmlinkage int sys32_pciconfig_iobase(u32 which, u32 in_bus, u32 in_devfn)
  * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode)
  * and the register representation of a signed int (msr in 64-bit mode) is performed.
  */
-asmlinkage long sys32_access(const char __user * filename, u32 mode)
+asmlinkage long compat_sys_access(const char __user * filename, u32 mode)
 {
 	return sys_access(filename, (int)mode);
 }
@@ -730,7 +592,7 @@ asmlinkage long sys32_access(const char __user * filename, u32 mode)
  * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode)
  * and the register representation of a signed int (msr in 64-bit mode) is performed.
  */
-asmlinkage long sys32_creat(const char __user * pathname, u32 mode)
+asmlinkage long compat_sys_creat(const char __user * pathname, u32 mode)
 {
 	return sys_creat(pathname, (int)mode);
 }
@@ -741,7 +603,7 @@ asmlinkage long sys32_creat(const char __user * pathname, u32 mode)
  * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode)
  * and the register representation of a signed int (msr in 64-bit mode) is performed.
  */
-asmlinkage long sys32_waitpid(u32 pid, unsigned int __user * stat_addr, u32 options)
+asmlinkage long compat_sys_waitpid(u32 pid, unsigned int __user * stat_addr, u32 options)
 {
 	return sys_waitpid((int)pid, stat_addr, (int)options);
 }
@@ -752,7 +614,7 @@ asmlinkage long sys32_waitpid(u32 pid, unsigned int __user * stat_addr, u32 opti
  * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode)
  * and the register representation of a signed int (msr in 64-bit mode) is performed.
  */
-asmlinkage long sys32_getgroups(u32 gidsetsize, gid_t __user *grouplist)
+asmlinkage long compat_sys_getgroups(u32 gidsetsize, gid_t __user *grouplist)
 {
 	return sys_getgroups((int)gidsetsize, grouplist);
 }
@@ -763,7 +625,7 @@ asmlinkage long sys32_getgroups(u32 gidsetsize, gid_t __user *grouplist)
  * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode)
  * and the register representation of a signed int (msr in 64-bit mode) is performed.
  */
-asmlinkage long sys32_getpgid(u32 pid)
+asmlinkage long compat_sys_getpgid(u32 pid)
 {
 	return sys_getpgid((int)pid);
 }
@@ -775,7 +637,7 @@ asmlinkage long sys32_getpgid(u32 pid)
  * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode)
  * and the register representation of a signed int (msr in 64-bit mode) is performed.
  */
-asmlinkage long sys32_getsid(u32 pid)
+asmlinkage long compat_sys_getsid(u32 pid)
 {
 	return sys_getsid((int)pid);
 }
@@ -786,7 +648,7 @@ asmlinkage long sys32_getsid(u32 pid)
  * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode)
  * and the register representation of a signed int (msr in 64-bit mode) is performed.
  */
-asmlinkage long sys32_kill(u32 pid, u32 sig)
+asmlinkage long compat_sys_kill(u32 pid, u32 sig)
 {
 	return sys_kill((int)pid, (int)sig);
 }
@@ -797,12 +659,12 @@ asmlinkage long sys32_kill(u32 pid, u32 sig)
  * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode)
  * and the register representation of a signed int (msr in 64-bit mode) is performed.
  */
-asmlinkage long sys32_mkdir(const char __user * pathname, u32 mode)
+asmlinkage long compat_sys_mkdir(const char __user * pathname, u32 mode)
 {
 	return sys_mkdir(pathname, (int)mode);
 }
 
-long sys32_nice(u32 increment)
+long compat_sys_nice(u32 increment)
 {
 	/* sign extend increment */
 	return sys_nice((int)increment);
@@ -819,7 +681,7 @@ off_t ppc32_lseek(unsigned int fd, u32 offset, unsigned int origin)
  * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode)
  * and the register representation of a signed int (msr in 64-bit mode) is performed.
  */
-asmlinkage long sys32_readlink(const char __user * path, char __user * buf, u32 bufsiz)
+asmlinkage long compat_sys_readlink(const char __user * path, char __user * buf, u32 bufsiz)
 {
 	return sys_readlink(path, buf, (int)bufsiz);
 }
@@ -829,7 +691,7 @@ asmlinkage long sys32_readlink(const char __user * path, char __user * buf, u32
  * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode)
  * and the register representation of a signed int (msr in 64-bit mode) is performed.
  */
-asmlinkage long sys32_sched_get_priority_max(u32 policy)
+asmlinkage long compat_sys_sched_get_priority_max(u32 policy)
 {
 	return sys_sched_get_priority_max((int)policy);
 }
@@ -840,7 +702,7 @@ asmlinkage long sys32_sched_get_priority_max(u32 policy)
  * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode)
  * and the register representation of a signed int (msr in 64-bit mode) is performed.
  */
-asmlinkage long sys32_sched_get_priority_min(u32 policy)
+asmlinkage long compat_sys_sched_get_priority_min(u32 policy)
 {
 	return sys_sched_get_priority_min((int)policy);
 }
@@ -851,7 +713,7 @@ asmlinkage long sys32_sched_get_priority_min(u32 policy)
  * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode)
  * and the register representation of a signed int (msr in 64-bit mode) is performed.
  */
-asmlinkage long sys32_sched_getparam(u32 pid, struct sched_param __user *param)
+asmlinkage long compat_sys_sched_getparam(u32 pid, struct sched_param __user *param)
 {
 	return sys_sched_getparam((int)pid, param);
 }
@@ -862,7 +724,7 @@ asmlinkage long sys32_sched_getparam(u32 pid, struct sched_param __user *param)
  * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode)
  * and the register representation of a signed int (msr in 64-bit mode) is performed.
  */
-asmlinkage long sys32_sched_getscheduler(u32 pid)
+asmlinkage long compat_sys_sched_getscheduler(u32 pid)
 {
 	return sys_sched_getscheduler((int)pid);
 }
@@ -873,7 +735,7 @@ asmlinkage long sys32_sched_getscheduler(u32 pid)
  * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode)
  * and the register representation of a signed int (msr in 64-bit mode) is performed.
  */
-asmlinkage long sys32_sched_setparam(u32 pid, struct sched_param __user *param)
+asmlinkage long compat_sys_sched_setparam(u32 pid, struct sched_param __user *param)
 {
 	return sys_sched_setparam((int)pid, param);
 }
@@ -884,7 +746,7 @@ asmlinkage long sys32_sched_setparam(u32 pid, struct sched_param __user *param)
  * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode)
  * and the register representation of a signed int (msr in 64-bit mode) is performed.
  */
-asmlinkage long sys32_sched_setscheduler(u32 pid, u32 policy, struct sched_param __user *param)
+asmlinkage long compat_sys_sched_setscheduler(u32 pid, u32 policy, struct sched_param __user *param)
 {
 	return sys_sched_setscheduler((int)pid, (int)policy, param);
 }
@@ -895,7 +757,7 @@ asmlinkage long sys32_sched_setscheduler(u32 pid, u32 policy, struct sched_param
  * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode)
  * and the register representation of a signed int (msr in 64-bit mode) is performed.
  */
-asmlinkage long sys32_setdomainname(char __user *name, u32 len)
+asmlinkage long compat_sys_setdomainname(char __user *name, u32 len)
 {
 	return sys_setdomainname(name, (int)len);
 }
@@ -906,13 +768,13 @@ asmlinkage long sys32_setdomainname(char __user *name, u32 len)
  * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode)
  * and the register representation of a signed int (msr in 64-bit mode) is performed.
  */
-asmlinkage long sys32_setgroups(u32 gidsetsize, gid_t __user *grouplist)
+asmlinkage long compat_sys_setgroups(u32 gidsetsize, gid_t __user *grouplist)
 {
 	return sys_setgroups((int)gidsetsize, grouplist);
 }
 
 
-asmlinkage long sys32_sethostname(char __user *name, u32 len)
+asmlinkage long compat_sys_sethostname(char __user *name, u32 len)
 {
 	/* sign extend len */
 	return sys_sethostname(name, (int)len);
@@ -924,30 +786,30 @@ asmlinkage long sys32_sethostname(char __user *name, u32 len)
  * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode)
  * and the register representation of a signed int (msr in 64-bit mode) is performed.
  */
-asmlinkage long sys32_setpgid(u32 pid, u32 pgid)
+asmlinkage long compat_sys_setpgid(u32 pid, u32 pgid)
 {
 	return sys_setpgid((int)pid, (int)pgid);
 }
 
-long sys32_getpriority(u32 which, u32 who)
+long compat_sys_getpriority(u32 which, u32 who)
 {
 	/* sign extend which and who */
 	return sys_getpriority((int)which, (int)who);
 }
 
-long sys32_setpriority(u32 which, u32 who, u32 niceval)
+long compat_sys_setpriority(u32 which, u32 who, u32 niceval)
 {
 	/* sign extend which, who and niceval */
 	return sys_setpriority((int)which, (int)who, (int)niceval);
 }
 
-long sys32_ioprio_get(u32 which, u32 who)
+long compat_sys_ioprio_get(u32 which, u32 who)
 {
 	/* sign extend which and who */
 	return sys_ioprio_get((int)which, (int)who);
 }
 
-long sys32_ioprio_set(u32 which, u32 who, u32 ioprio)
+long compat_sys_ioprio_set(u32 which, u32 who, u32 ioprio)
 {
 	/* sign extend which, who and ioprio */
 	return sys_ioprio_set((int)which, (int)who, (int)ioprio);
@@ -958,12 +820,12 @@ long sys32_ioprio_set(u32 which, u32 who, u32 ioprio)
  * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode)
  * and the register representation of a signed int (msr in 64-bit mode) is performed.
  */
-asmlinkage long sys32_ssetmask(u32 newmask)
+asmlinkage long compat_sys_ssetmask(u32 newmask)
 {
 	return sys_ssetmask((int) newmask);
 }
 
-asmlinkage long sys32_syslog(u32 type, char __user * buf, u32 len)
+asmlinkage long compat_sys_syslog(u32 type, char __user * buf, u32 len)
 {
 	/* sign extend len */
 	return sys_syslog(type, buf, (int)len);
@@ -975,7 +837,7 @@ asmlinkage long sys32_syslog(u32 type, char __user * buf, u32 len)
  * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode)
  * and the register representation of a signed int (msr in 64-bit mode) is performed.
  */
-asmlinkage long sys32_umask(u32 mask)
+asmlinkage long compat_sys_umask(u32 mask)
 {
 	return sys_umask((int)mask);
 }
@@ -991,7 +853,7 @@ struct __sysctl_args32 {
 	u32 __unused[4];
 };
 
-asmlinkage long sys32_sysctl(struct __sysctl_args32 __user *args)
+asmlinkage long compat_sys_sysctl(struct __sysctl_args32 __user *args)
 {
 	struct __sysctl_args32 tmp;
 	int error;
@@ -1032,55 +894,7 @@ asmlinkage long sys32_sysctl(struct __sysctl_args32 __user *args)
 }
 #endif
 
-asmlinkage int sys32_uname(struct old_utsname __user * name)
-{
-	int err = 0;
-	
-	down_read(&uts_sem);
-	if (copy_to_user(name, &system_utsname, sizeof(*name)))
-		err = -EFAULT;
-	up_read(&uts_sem);
-	if (!err && personality(current->personality) == PER_LINUX32) {
-		/* change "ppc64" to "ppc" */
-		if (__put_user(0, name->machine + 3)
-		    || __put_user(0, name->machine + 4))
-			err = -EFAULT;
-	}
-	return err;
-}
-
-asmlinkage int sys32_olduname(struct oldold_utsname __user * name)
-{
-	int error;
-
-	if (!access_ok(VERIFY_WRITE,name,sizeof(struct oldold_utsname)))
-		return -EFAULT;
-  
-	down_read(&uts_sem);
-	error = __copy_to_user(&name->sysname,&system_utsname.sysname,__OLD_UTS_LEN);
-	error |= __put_user(0,name->sysname+__OLD_UTS_LEN);
-	error |= __copy_to_user(&name->nodename,&system_utsname.nodename,__OLD_UTS_LEN);
-	error |= __put_user(0,name->nodename+__OLD_UTS_LEN);
-	error |= __copy_to_user(&name->release,&system_utsname.release,__OLD_UTS_LEN);
-	error |= __put_user(0,name->release+__OLD_UTS_LEN);
-	error |= __copy_to_user(&name->version,&system_utsname.version,__OLD_UTS_LEN);
-	error |= __put_user(0,name->version+__OLD_UTS_LEN);
-	error |= __copy_to_user(&name->machine,&system_utsname.machine,__OLD_UTS_LEN);
-	error |= __put_user(0,name->machine+__OLD_UTS_LEN);
-	if (personality(current->personality) == PER_LINUX32) {
-		/* change "ppc64" to "ppc" */
-		error |= __put_user(0, name->machine + 3);
-		error |= __put_user(0, name->machine + 4);
-	}
-	
-	up_read(&uts_sem);
-
-	error = error ? -EFAULT : 0;
-	
-	return error;
-}
-
-unsigned long sys32_mmap2(unsigned long addr, size_t len,
+unsigned long compat_sys_mmap2(unsigned long addr, size_t len,
 			  unsigned long prot, unsigned long flags,
 			  unsigned long fd, unsigned long pgoff)
 {
@@ -1088,29 +902,7 @@ unsigned long sys32_mmap2(unsigned long addr, size_t len,
 	return sys_mmap(addr, len, prot, flags, fd, pgoff << 12);
 }
 
-int get_compat_timeval(struct timeval *tv, struct compat_timeval __user *ctv)
-{
-	return (!access_ok(VERIFY_READ, ctv, sizeof(*ctv)) ||
-		__get_user(tv->tv_sec, &ctv->tv_sec) ||
-		__get_user(tv->tv_usec, &ctv->tv_usec)) ? -EFAULT : 0;
-}
-
-asmlinkage long sys32_utimes(char __user *filename, struct compat_timeval __user *tvs)
-{
-	struct timeval ktvs[2], *ptr;
-
-	ptr = NULL;
-	if (tvs) {
-		if (get_compat_timeval(&ktvs[0], &tvs[0]) ||
-		    get_compat_timeval(&ktvs[1], &tvs[1]))
-			return -EFAULT;
-		ptr = ktvs;
-	}
-
-	return do_utimes(filename, ptr);
-}
-
-long sys32_tgkill(u32 tgid, u32 pid, int sig)
+long compat_sys_tgkill(u32 tgid, u32 pid, int sig)
 {
 	/* sign extend tgid, pid */
 	return sys_tgkill((int)tgid, (int)pid, sig);
@@ -1121,30 +913,30 @@ long sys32_tgkill(u32 tgid, u32 pid, int sig)
  * The 32 bit ABI passes long longs in an odd even register pair.
  */
 
-compat_ssize_t sys32_pread64(unsigned int fd, char __user *ubuf, compat_size_t count,
+compat_ssize_t compat_sys_pread64(unsigned int fd, char __user *ubuf, compat_size_t count,
 			     u32 reg6, u32 poshi, u32 poslo)
 {
 	return sys_pread64(fd, ubuf, count, ((loff_t)poshi << 32) | poslo);
 }
 
-compat_ssize_t sys32_pwrite64(unsigned int fd, char __user *ubuf, compat_size_t count,
+compat_ssize_t compat_sys_pwrite64(unsigned int fd, char __user *ubuf, compat_size_t count,
 			      u32 reg6, u32 poshi, u32 poslo)
 {
 	return sys_pwrite64(fd, ubuf, count, ((loff_t)poshi << 32) | poslo);
 }
 
-compat_ssize_t sys32_readahead(int fd, u32 r4, u32 offhi, u32 offlo, u32 count)
+compat_ssize_t compat_sys_readahead(int fd, u32 r4, u32 offhi, u32 offlo, u32 count)
 {
 	return sys_readahead(fd, ((loff_t)offhi << 32) | offlo, count);
 }
 
-asmlinkage int sys32_truncate64(const char __user * path, u32 reg4,
+asmlinkage int compat_sys_truncate64(const char __user * path, u32 reg4,
 				unsigned long high, unsigned long low)
 {
 	return sys_truncate(path, (high << 32) | low);
 }
 
-asmlinkage int sys32_ftruncate64(unsigned int fd, u32 reg4, unsigned long high,
+asmlinkage int compat_sys_ftruncate64(unsigned int fd, u32 reg4, unsigned long high,
 				 unsigned long low)
 {
 	return sys_ftruncate(fd, (high << 32) | low);
@@ -1164,13 +956,6 @@ long ppc32_fadvise64(int fd, u32 unused, u32 offset_high, u32 offset_low,
 			     advice);
 }
 
-long ppc32_fadvise64_64(int fd, int advice, u32 offset_high, u32 offset_low,
-			u32 len_high, u32 len_low)
-{
-	return sys_fadvise64(fd, (u64)offset_high << 32 | offset_low,
-			     (u64)len_high << 32 | len_low, advice);
-}
-
 long ppc32_timer_create(clockid_t clock,
 			struct compat_sigevent __user *ev32,
 			timer_t __user *timer_id)
@@ -1203,7 +988,7 @@ long ppc32_timer_create(clockid_t clock,
 	return err;
 }
 
-asmlinkage long sys32_add_key(const char __user *_type,
+asmlinkage long compat_sys_add_key(const char __user *_type,
 			      const char __user *_description,
 			      const void __user *_payload,
 			      u32 plen,
@@ -1212,7 +997,7 @@ asmlinkage long sys32_add_key(const char __user *_type,
 	return sys_add_key(_type, _description, _payload, plen, ringid);
 }
 
-asmlinkage long sys32_request_key(const char __user *_type,
+asmlinkage long compat_sys_request_key(const char __user *_type,
 				  const char __user *_description,
 				  const char __user *_callout_info,
 				  u32 destringid)
diff --git a/arch/ppc64/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c
index 05f16633bd2c..f72ced11212d 100644
--- a/arch/ppc64/kernel/syscalls.c
+++ b/arch/powerpc/kernel/syscalls.c
@@ -1,7 +1,6 @@
 /*
- * linux/arch/ppc64/kernel/sys_ppc.c
+ *  Implementation of various system calls for Linux/PowerPC
  *
- *  PowerPC version 
  *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
  *
  * Derived from "arch/i386/kernel/sys_i386.c"
@@ -52,9 +51,8 @@ extern unsigned long wall_jiffies;
  *
  * This is really horribly ugly.
  */
-asmlinkage int 
-sys_ipc (uint call, int first, unsigned long second, long third,
-	 void __user *ptr, long fifth)
+int sys_ipc(uint call, int first, unsigned long second, long third,
+	    void __user *ptr, long fifth)
 {
 	int version, ret;
 
@@ -88,7 +86,7 @@ sys_ipc (uint call, int first, unsigned long second, long third,
 	}
 	case MSGSND:
 		ret = sys_msgsnd(first, (struct msgbuf __user *)ptr,
-				  (size_t)second, third);
+				 (size_t)second, third);
 		break;
 	case MSGRCV:
 		switch (version) {
@@ -113,41 +111,29 @@ sys_ipc (uint call, int first, unsigned long second, long third,
 		}
 		break;
 	case MSGGET:
-		ret = sys_msgget ((key_t)first, (int)second);
+		ret = sys_msgget((key_t)first, (int)second);
 		break;
 	case MSGCTL:
 		ret = sys_msgctl(first, (int)second,
 				  (struct msqid_ds __user *)ptr);
 		break;
-	case SHMAT:
-		switch (version) {
-		default: {
-			ulong raddr;
-			ret = do_shmat(first, (char __user *) ptr,
-					(int)second, &raddr);
-			if (ret)
-				break;
-			ret = put_user (raddr, (ulong __user *) third);
-			break;
-		}
-		case 1:	/* iBCS2 emulator entry point */
-			ret = -EINVAL;
-			if (!segment_eq(get_fs(), get_ds()))
-				break;
-			ret = do_shmat(first, (char __user *)ptr,
-					(int)second, (ulong *)third);
+	case SHMAT: {
+		ulong raddr;
+		ret = do_shmat(first, (char __user *)ptr, (int)second, &raddr);
+		if (ret)
 			break;
-		}
+		ret = put_user(raddr, (ulong __user *) third);
 		break;
-	case SHMDT: 
-		ret = sys_shmdt ((char __user *)ptr);
+	}
+	case SHMDT:
+		ret = sys_shmdt((char __user *)ptr);
 		break;
 	case SHMGET:
-		ret = sys_shmget (first, (size_t)second, third);
+		ret = sys_shmget(first, (size_t)second, third);
 		break;
 	case SHMCTL:
 		ret = sys_shmctl(first, (int)second,
-				  (struct shmid_ds __user *)ptr);
+				 (struct shmid_ds __user *)ptr);
 		break;
 	}
 
@@ -158,43 +144,89 @@ sys_ipc (uint call, int first, unsigned long second, long third,
  * sys_pipe() is the normal C calling standard for creating
  * a pipe. It's not the way unix traditionally does this, though.
  */
-asmlinkage int sys_pipe(int __user *fildes)
+int sys_pipe(int __user *fildes)
 {
 	int fd[2];
 	int error;
-	
+
 	error = do_pipe(fd);
 	if (!error) {
 		if (copy_to_user(fildes, fd, 2*sizeof(int)))
 			error = -EFAULT;
 	}
-	
 	return error;
 }
 
-unsigned long sys_mmap(unsigned long addr, size_t len,
-		       unsigned long prot, unsigned long flags,
-		       unsigned long fd, off_t offset)
+static inline unsigned long do_mmap2(unsigned long addr, size_t len,
+			unsigned long prot, unsigned long flags,
+			unsigned long fd, unsigned long off, int shift)
 {
 	struct file * file = NULL;
-	unsigned long ret = -EBADF;
+	unsigned long ret = -EINVAL;
 
+	if (shift) {
+		if (off & ((1 << shift) - 1))
+			goto out;
+		off >>= shift;
+	}
+		
+	ret = -EBADF;
 	if (!(flags & MAP_ANONYMOUS)) {
 		if (!(file = fget(fd)))
 			goto out;
 	}
 
 	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
+
 	down_write(&current->mm->mmap_sem);
-	ret = do_mmap(file, addr, len, prot, flags, offset);
+	ret = do_mmap_pgoff(file, addr, len, prot, flags, off);
 	up_write(&current->mm->mmap_sem);
 	if (file)
 		fput(file);
-
 out:
 	return ret;
 }
 
+unsigned long sys_mmap2(unsigned long addr, size_t len,
+			unsigned long prot, unsigned long flags,
+			unsigned long fd, unsigned long pgoff)
+{
+	return do_mmap2(addr, len, prot, flags, fd, pgoff, PAGE_SHIFT-12);
+}
+
+unsigned long sys_mmap(unsigned long addr, size_t len,
+		       unsigned long prot, unsigned long flags,
+		       unsigned long fd, off_t offset)
+{
+	return do_mmap2(addr, len, prot, flags, fd, offset, PAGE_SHIFT);
+}
+
+#ifdef CONFIG_PPC32
+/*
+ * Due to some executables calling the wrong select we sometimes
+ * get wrong args.  This determines how the args are being passed
+ * (a single ptr to them all args passed) then calls
+ * sys_select() with the appropriate args. -- Cort
+ */
+int
+ppc_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp, struct timeval __user *tvp)
+{
+	if ( (unsigned long)n >= 4096 )
+	{
+		unsigned long __user *buffer = (unsigned long __user *)n;
+		if (!access_ok(VERIFY_READ, buffer, 5*sizeof(unsigned long))
+		    || __get_user(n, buffer)
+		    || __get_user(inp, ((fd_set __user * __user *)(buffer+1)))
+		    || __get_user(outp, ((fd_set  __user * __user *)(buffer+2)))
+		    || __get_user(exp, ((fd_set  __user * __user *)(buffer+3)))
+		    || __get_user(tvp, ((struct timeval  __user * __user *)(buffer+4))))
+			return -EFAULT;
+	}
+	return sys_select(n, inp, outp, exp, tvp);
+}
+#endif
+
+#ifdef CONFIG_PPC64
 long ppc64_personality(unsigned long personality)
 {
 	long ret;
@@ -207,8 +239,25 @@ long ppc64_personality(unsigned long personality)
 		ret = PER_LINUX;
 	return ret;
 }
+#endif
+
+#ifdef CONFIG_PPC64
+#define OVERRIDE_MACHINE    (personality(current->personality) == PER_LINUX32)
+#else
+#define OVERRIDE_MACHINE    0
+#endif
+
+static inline int override_machine(char *mach)
+{
+	if (OVERRIDE_MACHINE) {
+		/* change ppc64 to ppc */
+		if (__put_user(0, mach+3) || __put_user(0, mach+4))
+			return -EFAULT;
+	}
+	return 0;
+}
 
-long ppc64_newuname(struct new_utsname __user * name)
+long ppc_newuname(struct new_utsname __user * name)
 {
 	int err = 0;
 
@@ -216,16 +265,54 @@ long ppc64_newuname(struct new_utsname __user * name)
 	if (copy_to_user(name, &system_utsname, sizeof(*name)))
 		err = -EFAULT;
 	up_read(&uts_sem);
-	if (!err && personality(current->personality) == PER_LINUX32) {
-		/* change ppc64 to ppc */
-		if (__put_user(0, name->machine + 3)
-		    || __put_user(0, name->machine + 4))
-			err = -EFAULT;
-	}
+	if (!err)
+		err = override_machine(name->machine);
 	return err;
 }
 
-asmlinkage time_t sys64_time(time_t __user * tloc)
+int sys_uname(struct old_utsname __user *name)
+{
+	int err = 0;
+	
+	down_read(&uts_sem);
+	if (copy_to_user(name, &system_utsname, sizeof(*name)))
+		err = -EFAULT;
+	up_read(&uts_sem);
+	if (!err)
+		err = override_machine(name->machine);
+	return err;
+}
+
+int sys_olduname(struct oldold_utsname __user *name)
+{
+	int error;
+
+	if (!access_ok(VERIFY_WRITE, name, sizeof(struct oldold_utsname)))
+		return -EFAULT;
+  
+	down_read(&uts_sem);
+	error = __copy_to_user(&name->sysname, &system_utsname.sysname,
+			       __OLD_UTS_LEN);
+	error |= __put_user(0, name->sysname + __OLD_UTS_LEN);
+	error |= __copy_to_user(&name->nodename, &system_utsname.nodename,
+				__OLD_UTS_LEN);
+	error |= __put_user(0, name->nodename + __OLD_UTS_LEN);
+	error |= __copy_to_user(&name->release, &system_utsname.release,
+				__OLD_UTS_LEN);
+	error |= __put_user(0, name->release + __OLD_UTS_LEN);
+	error |= __copy_to_user(&name->version, &system_utsname.version,
+				__OLD_UTS_LEN);
+	error |= __put_user(0, name->version + __OLD_UTS_LEN);
+	error |= __copy_to_user(&name->machine, &system_utsname.machine,
+				__OLD_UTS_LEN);
+	error |= override_machine(name->machine);
+	up_read(&uts_sem);
+
+	return error? -EFAULT: 0;
+}
+
+#ifdef CONFIG_PPC64
+time_t sys64_time(time_t __user * tloc)
 {
 	time_t secs;
 	time_t usecs;
@@ -247,6 +334,14 @@ asmlinkage time_t sys64_time(time_t __user * tloc)
 
 	return secs;
 }
+#endif
+
+long ppc_fadvise64_64(int fd, int advice, u32 offset_high, u32 offset_low,
+		      u32 len_high, u32 len_low)
+{
+	return sys_fadvise64(fd, (u64)offset_high << 32 | offset_low,
+			     (u64)len_high << 32 | len_low, advice);
+}
 
 void do_show_syscall(unsigned long r3, unsigned long r4, unsigned long r5,
 		     unsigned long r6, unsigned long r7, unsigned long r8,
diff --git a/arch/ppc64/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index 6654b350979c..0f0c3a9ae2e5 100644
--- a/arch/ppc64/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -16,10 +16,10 @@
 #include <asm/firmware.h>
 #include <asm/hvcall.h>
 #include <asm/prom.h>
-#include <asm/systemcfg.h>
 #include <asm/paca.h>
 #include <asm/lppaca.h>
 #include <asm/machdep.h>
+#include <asm/smp.h>
 
 static DEFINE_PER_CPU(struct cpu, cpu_devices);
 
@@ -231,7 +231,7 @@ static void register_cpu_online(unsigned int cpu)
 		sysdev_create_file(s, &attr_pmc7);
 	if (cur_cpu_spec->num_pmcs >= 8)
 		sysdev_create_file(s, &attr_pmc8);
-  
+
 	if (cpu_has_feature(CPU_FTR_SMT))
 		sysdev_create_file(s, &attr_purr);
 }
diff --git a/arch/powerpc/kernel/systbl.S b/arch/powerpc/kernel/systbl.S
new file mode 100644
index 000000000000..65eaea91b499
--- /dev/null
+++ b/arch/powerpc/kernel/systbl.S
@@ -0,0 +1,321 @@
+/*
+ * This file contains the table of syscall-handling functions.
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Largely rewritten by Cort Dougan (cort@cs.nmt.edu)
+ * and Paul Mackerras.
+ *
+ * Adapted for iSeries by Mike Corrigan (mikejc@us.ibm.com)
+ * PPC64 updates by Dave Engebretsen (engebret@us.ibm.com) 
+ * 
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <asm/ppc_asm.h>
+
+#ifdef CONFIG_PPC64
+#define SYSCALL(func)		.llong	.sys_##func,.sys_##func
+#define COMPAT_SYS(func)	.llong	.sys_##func,.compat_sys_##func
+#define PPC_SYS(func)		.llong	.ppc_##func,.ppc_##func
+#define OLDSYS(func)		.llong	.sys_ni_syscall,.sys_ni_syscall
+#define SYS32ONLY(func)		.llong	.sys_ni_syscall,.compat_sys_##func
+#define SYSX(f, f3264, f32)	.llong	.f,.f3264
+#else
+#define SYSCALL(func)		.long	sys_##func
+#define COMPAT_SYS(func)	.long	sys_##func
+#define PPC_SYS(func)		.long	ppc_##func
+#define OLDSYS(func)		.long	sys_##func
+#define SYS32ONLY(func)		.long	sys_##func
+#define SYSX(f, f3264, f32)	.long	f32
+#endif
+
+#ifdef CONFIG_PPC64
+#define sys_sigpending	sys_ni_syscall
+#define sys_old_getrlimit sys_ni_syscall
+#else
+#define ppc_rtas	sys_ni_syscall
+#endif
+
+_GLOBAL(sys_call_table)
+SYSCALL(restart_syscall)
+SYSCALL(exit)
+PPC_SYS(fork)
+SYSCALL(read)
+SYSCALL(write)
+COMPAT_SYS(open)
+SYSCALL(close)
+COMPAT_SYS(waitpid)
+COMPAT_SYS(creat)
+SYSCALL(link)
+SYSCALL(unlink)
+COMPAT_SYS(execve)
+SYSCALL(chdir)
+SYSX(sys64_time,compat_sys_time,sys_time)
+SYSCALL(mknod)
+SYSCALL(chmod)
+SYSCALL(lchown)
+SYSCALL(ni_syscall)
+OLDSYS(stat)
+SYSX(sys_lseek,ppc32_lseek,sys_lseek)
+SYSCALL(getpid)
+COMPAT_SYS(mount)
+SYSX(sys_ni_syscall,sys_oldumount,sys_oldumount)
+SYSCALL(setuid)
+SYSCALL(getuid)
+COMPAT_SYS(stime)
+COMPAT_SYS(ptrace)
+SYSCALL(alarm)
+OLDSYS(fstat)
+COMPAT_SYS(pause)
+COMPAT_SYS(utime)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+COMPAT_SYS(access)
+COMPAT_SYS(nice)
+SYSCALL(ni_syscall)
+SYSCALL(sync)
+COMPAT_SYS(kill)
+SYSCALL(rename)
+COMPAT_SYS(mkdir)
+SYSCALL(rmdir)
+SYSCALL(dup)
+SYSCALL(pipe)
+COMPAT_SYS(times)
+SYSCALL(ni_syscall)
+SYSCALL(brk)
+SYSCALL(setgid)
+SYSCALL(getgid)
+SYSCALL(signal)
+SYSCALL(geteuid)
+SYSCALL(getegid)
+SYSCALL(acct)
+SYSCALL(umount)
+SYSCALL(ni_syscall)
+COMPAT_SYS(ioctl)
+COMPAT_SYS(fcntl)
+SYSCALL(ni_syscall)
+COMPAT_SYS(setpgid)
+SYSCALL(ni_syscall)
+SYSX(sys_ni_syscall,sys_olduname, sys_olduname)
+COMPAT_SYS(umask)
+SYSCALL(chroot)
+SYSCALL(ustat)
+SYSCALL(dup2)
+SYSCALL(getppid)
+SYSCALL(getpgrp)
+SYSCALL(setsid)
+SYS32ONLY(sigaction)
+SYSCALL(sgetmask)
+COMPAT_SYS(ssetmask)
+SYSCALL(setreuid)
+SYSCALL(setregid)
+SYSX(sys_ni_syscall,ppc32_sigsuspend,ppc_sigsuspend)
+COMPAT_SYS(sigpending)
+COMPAT_SYS(sethostname)
+COMPAT_SYS(setrlimit)
+COMPAT_SYS(old_getrlimit)
+COMPAT_SYS(getrusage)
+COMPAT_SYS(gettimeofday)
+COMPAT_SYS(settimeofday)
+COMPAT_SYS(getgroups)
+COMPAT_SYS(setgroups)
+SYSX(sys_ni_syscall,sys_ni_syscall,ppc_select)
+SYSCALL(symlink)
+OLDSYS(lstat)
+COMPAT_SYS(readlink)
+SYSCALL(uselib)
+SYSCALL(swapon)
+SYSCALL(reboot)
+SYSX(sys_ni_syscall,old32_readdir,old_readdir)
+SYSCALL(mmap)
+SYSCALL(munmap)
+SYSCALL(truncate)
+SYSCALL(ftruncate)
+SYSCALL(fchmod)
+SYSCALL(fchown)
+COMPAT_SYS(getpriority)
+COMPAT_SYS(setpriority)
+SYSCALL(ni_syscall)
+COMPAT_SYS(statfs)
+COMPAT_SYS(fstatfs)
+SYSCALL(ni_syscall)
+COMPAT_SYS(socketcall)
+COMPAT_SYS(syslog)
+COMPAT_SYS(setitimer)
+COMPAT_SYS(getitimer)
+COMPAT_SYS(newstat)
+COMPAT_SYS(newlstat)
+COMPAT_SYS(newfstat)
+SYSX(sys_ni_syscall,sys_uname,sys_uname)
+SYSCALL(ni_syscall)
+SYSCALL(vhangup)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+COMPAT_SYS(wait4)
+SYSCALL(swapoff)
+COMPAT_SYS(sysinfo)
+COMPAT_SYS(ipc)
+SYSCALL(fsync)
+SYSX(sys_ni_syscall,ppc32_sigreturn,sys_sigreturn)
+PPC_SYS(clone)
+COMPAT_SYS(setdomainname)
+PPC_SYS(newuname)
+SYSCALL(ni_syscall)
+COMPAT_SYS(adjtimex)
+SYSCALL(mprotect)
+SYSX(sys_ni_syscall,compat_sys_sigprocmask,sys_sigprocmask)
+SYSCALL(ni_syscall)
+SYSCALL(init_module)
+SYSCALL(delete_module)
+SYSCALL(ni_syscall)
+SYSCALL(quotactl)
+COMPAT_SYS(getpgid)
+SYSCALL(fchdir)
+SYSCALL(bdflush)
+COMPAT_SYS(sysfs)
+SYSX(ppc64_personality,ppc64_personality,sys_personality)
+SYSCALL(ni_syscall)
+SYSCALL(setfsuid)
+SYSCALL(setfsgid)
+SYSCALL(llseek)
+COMPAT_SYS(getdents)
+SYSX(sys_select,ppc32_select,ppc_select)
+SYSCALL(flock)
+SYSCALL(msync)
+COMPAT_SYS(readv)
+COMPAT_SYS(writev)
+COMPAT_SYS(getsid)
+SYSCALL(fdatasync)
+COMPAT_SYS(sysctl)
+SYSCALL(mlock)
+SYSCALL(munlock)
+SYSCALL(mlockall)
+SYSCALL(munlockall)
+COMPAT_SYS(sched_setparam)
+COMPAT_SYS(sched_getparam)
+COMPAT_SYS(sched_setscheduler)
+COMPAT_SYS(sched_getscheduler)
+SYSCALL(sched_yield)
+COMPAT_SYS(sched_get_priority_max)
+COMPAT_SYS(sched_get_priority_min)
+COMPAT_SYS(sched_rr_get_interval)
+COMPAT_SYS(nanosleep)
+SYSCALL(mremap)
+SYSCALL(setresuid)
+SYSCALL(getresuid)
+SYSCALL(ni_syscall)
+SYSCALL(poll)
+COMPAT_SYS(nfsservctl)
+SYSCALL(setresgid)
+SYSCALL(getresgid)
+COMPAT_SYS(prctl)
+SYSX(ppc64_rt_sigreturn,ppc32_rt_sigreturn,sys_rt_sigreturn)
+COMPAT_SYS(rt_sigaction)
+COMPAT_SYS(rt_sigprocmask)
+COMPAT_SYS(rt_sigpending)
+COMPAT_SYS(rt_sigtimedwait)
+COMPAT_SYS(rt_sigqueueinfo)
+SYSX(ppc64_rt_sigsuspend,ppc32_rt_sigsuspend,ppc_rt_sigsuspend)
+COMPAT_SYS(pread64)
+COMPAT_SYS(pwrite64)
+SYSCALL(chown)
+SYSCALL(getcwd)
+SYSCALL(capget)
+SYSCALL(capset)
+COMPAT_SYS(sigaltstack)
+SYSX(sys_sendfile64,compat_sys_sendfile,sys_sendfile)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+PPC_SYS(vfork)
+COMPAT_SYS(getrlimit)
+COMPAT_SYS(readahead)
+SYS32ONLY(mmap2)
+SYS32ONLY(truncate64)
+SYS32ONLY(ftruncate64)
+SYSX(sys_ni_syscall,sys_stat64,sys_stat64)
+SYSX(sys_ni_syscall,sys_lstat64,sys_lstat64)
+SYSX(sys_ni_syscall,sys_fstat64,sys_fstat64)
+COMPAT_SYS(pciconfig_read)
+COMPAT_SYS(pciconfig_write)
+COMPAT_SYS(pciconfig_iobase)
+SYSCALL(ni_syscall)
+SYSCALL(getdents64)
+SYSCALL(pivot_root)
+SYSX(sys_ni_syscall,compat_sys_fcntl64,sys_fcntl64)
+SYSCALL(madvise)
+SYSCALL(mincore)
+SYSCALL(gettid)
+SYSCALL(tkill)
+SYSCALL(setxattr)
+SYSCALL(lsetxattr)
+SYSCALL(fsetxattr)
+SYSCALL(getxattr)
+SYSCALL(lgetxattr)
+SYSCALL(fgetxattr)
+SYSCALL(listxattr)
+SYSCALL(llistxattr)
+SYSCALL(flistxattr)
+SYSCALL(removexattr)
+SYSCALL(lremovexattr)
+SYSCALL(fremovexattr)
+COMPAT_SYS(futex)
+COMPAT_SYS(sched_setaffinity)
+COMPAT_SYS(sched_getaffinity)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+SYS32ONLY(sendfile64)
+COMPAT_SYS(io_setup)
+SYSCALL(io_destroy)
+COMPAT_SYS(io_getevents)
+COMPAT_SYS(io_submit)
+SYSCALL(io_cancel)
+SYSCALL(set_tid_address)
+SYSX(sys_fadvise64,ppc32_fadvise64,sys_fadvise64)
+SYSCALL(exit_group)
+SYSX(sys_lookup_dcookie,ppc32_lookup_dcookie,sys_lookup_dcookie)
+SYSCALL(epoll_create)
+SYSCALL(epoll_ctl)
+SYSCALL(epoll_wait)
+SYSCALL(remap_file_pages)
+SYSX(sys_timer_create,ppc32_timer_create,sys_timer_create)
+COMPAT_SYS(timer_settime)
+COMPAT_SYS(timer_gettime)
+SYSCALL(timer_getoverrun)
+SYSCALL(timer_delete)
+COMPAT_SYS(clock_settime)
+COMPAT_SYS(clock_gettime)
+COMPAT_SYS(clock_getres)
+COMPAT_SYS(clock_nanosleep)
+SYSX(ppc64_swapcontext,ppc32_swapcontext,ppc_swapcontext)
+COMPAT_SYS(tgkill)
+COMPAT_SYS(utimes)
+COMPAT_SYS(statfs64)
+COMPAT_SYS(fstatfs64)
+SYSX(sys_ni_syscall, ppc_fadvise64_64, ppc_fadvise64_64)
+PPC_SYS(rtas)
+OLDSYS(debug_setcontext)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+COMPAT_SYS(mbind)
+COMPAT_SYS(get_mempolicy)
+COMPAT_SYS(set_mempolicy)
+COMPAT_SYS(mq_open)
+SYSCALL(mq_unlink)
+COMPAT_SYS(mq_timedsend)
+COMPAT_SYS(mq_timedreceive)
+COMPAT_SYS(mq_notify)
+COMPAT_SYS(mq_getsetattr)
+COMPAT_SYS(kexec_load)
+COMPAT_SYS(add_key)
+COMPAT_SYS(request_key)
+COMPAT_SYS(keyctl)
+COMPAT_SYS(waitid)
+COMPAT_SYS(ioprio_set)
+COMPAT_SYS(ioprio_get)
+SYSCALL(inotify_init)
+SYSCALL(inotify_add_watch)
+SYSCALL(inotify_rm_watch)
diff --git a/arch/ppc64/kernel/time.c b/arch/powerpc/kernel/time.c
index 9939c206afa4..de8479769bb7 100644
--- a/arch/ppc64/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -1,5 +1,4 @@
 /*
- * 
  * Common time routines among all ppc machines.
  *
  * Written by Cort Dougan (cort@cs.nmt.edu) to merge
@@ -44,33 +43,34 @@
 #include <linux/interrupt.h>
 #include <linux/timex.h>
 #include <linux/kernel_stat.h>
-#include <linux/mc146818rtc.h>
 #include <linux/time.h>
 #include <linux/init.h>
 #include <linux/profile.h>
 #include <linux/cpu.h>
 #include <linux/security.h>
+#include <linux/percpu.h>
+#include <linux/rtc.h>
 
 #include <asm/io.h>
 #include <asm/processor.h>
 #include <asm/nvram.h>
 #include <asm/cache.h>
 #include <asm/machdep.h>
-#ifdef CONFIG_PPC_ISERIES
-#include <asm/iSeries/ItLpQueue.h>
-#include <asm/iSeries/HvCallXm.h>
-#endif
 #include <asm/uaccess.h>
 #include <asm/time.h>
-#include <asm/ppcdebug.h>
 #include <asm/prom.h>
-#include <asm/sections.h>
-#include <asm/systemcfg.h>
+#include <asm/irq.h>
+#include <asm/div64.h>
+#include <asm/smp.h>
+#include <asm/vdso_datapage.h>
+#ifdef CONFIG_PPC64
 #include <asm/firmware.h>
-
-u64 jiffies_64 __cacheline_aligned_in_smp = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
+#endif
+#ifdef CONFIG_PPC_ISERIES
+#include <asm/iseries/it_lp_queue.h>
+#include <asm/iseries/hv_call_xm.h>
+#endif
+#include <asm/smp.h>
 
 /* keep track of when we need to update the rtc */
 time_t last_rtc_update;
@@ -81,27 +81,37 @@ unsigned long iSeries_recal_tb = 0;
 static unsigned long first_settimeofday = 1;
 #endif
 
+/* The decrementer counts down by 128 every 128ns on a 601. */
+#define DECREMENTER_COUNT_601	(1000000000 / HZ)
+
 #define XSEC_PER_SEC (1024*1024)
 
+#ifdef CONFIG_PPC64
+#define SCALE_XSEC(xsec, max)	(((xsec) * max) / XSEC_PER_SEC)
+#else
+/* compute ((xsec << 12) * max) >> 32 */
+#define SCALE_XSEC(xsec, max)	mulhwu((xsec) << 12, max)
+#endif
+
 unsigned long tb_ticks_per_jiffy;
 unsigned long tb_ticks_per_usec = 100; /* sane default */
 EXPORT_SYMBOL(tb_ticks_per_usec);
 unsigned long tb_ticks_per_sec;
-unsigned long tb_to_xs;
-unsigned      tb_to_us;
+u64 tb_to_xs;
+unsigned tb_to_us;
 unsigned long processor_freq;
 DEFINE_SPINLOCK(rtc_lock);
 EXPORT_SYMBOL_GPL(rtc_lock);
 
-unsigned long tb_to_ns_scale;
-unsigned long tb_to_ns_shift;
+u64 tb_to_ns_scale;
+unsigned tb_to_ns_shift;
 
 struct gettimeofday_struct do_gtod;
 
 extern unsigned long wall_jiffies;
-extern int smp_tb_synchronized;
 
 extern struct timezone sys_tz;
+static long timezone_offset;
 
 void ppc_adjtimex(void);
 
@@ -110,6 +120,44 @@ static unsigned adjusting_time = 0;
 unsigned long ppc_proc_freq;
 unsigned long ppc_tb_freq;
 
+u64 tb_last_jiffy __cacheline_aligned_in_smp;
+unsigned long tb_last_stamp;
+
+/*
+ * Note that on ppc32 this only stores the bottom 32 bits of
+ * the timebase value, but that's enough to tell when a jiffy
+ * has passed.
+ */
+DEFINE_PER_CPU(unsigned long, last_jiffy);
+
+void __delay(unsigned long loops)
+{
+	unsigned long start;
+	int diff;
+
+	if (__USE_RTC()) {
+		start = get_rtcl();
+		do {
+			/* the RTCL register wraps at 1000000000 */
+			diff = get_rtcl() - start;
+			if (diff < 0)
+				diff += 1000000000;
+		} while (diff < loops);
+	} else {
+		start = get_tbl();
+		while (get_tbl() - start < loops)
+			HMT_low();
+		HMT_medium();
+	}
+}
+EXPORT_SYMBOL(__delay);
+
+void udelay(unsigned long usecs)
+{
+	__delay(tb_ticks_per_usec * usecs);
+}
+EXPORT_SYMBOL(udelay);
+
 static __inline__ void timer_check_rtc(void)
 {
         /*
@@ -128,31 +176,31 @@ static __inline__ void timer_check_rtc(void)
          * We should have an rtc call that only sets the minutes and
          * seconds like on Intel to avoid problems with non UTC clocks.
          */
-        if (ntp_synced() &&
-             xtime.tv_sec - last_rtc_update >= 659 &&
-             abs((xtime.tv_nsec/1000) - (1000000-1000000/HZ)) < 500000/HZ &&
-             jiffies - wall_jiffies == 1) {
-	    struct rtc_time tm;
-	    to_tm(xtime.tv_sec+1, &tm);
-	    tm.tm_year -= 1900;
-	    tm.tm_mon -= 1;
-            if (ppc_md.set_rtc_time(&tm) == 0)
-                last_rtc_update = xtime.tv_sec+1;
-            else
-                /* Try again one minute later */
-                last_rtc_update += 60;
+        if (ppc_md.set_rtc_time && ntp_synced() &&
+	    xtime.tv_sec - last_rtc_update >= 659 &&
+	    abs((xtime.tv_nsec/1000) - (1000000-1000000/HZ)) < 500000/HZ &&
+	    jiffies - wall_jiffies == 1) {
+		struct rtc_time tm;
+		to_tm(xtime.tv_sec + 1 + timezone_offset, &tm);
+		tm.tm_year -= 1900;
+		tm.tm_mon -= 1;
+		if (ppc_md.set_rtc_time(&tm) == 0)
+			last_rtc_update = xtime.tv_sec + 1;
+		else
+			/* Try again one minute later */
+			last_rtc_update += 60;
         }
 }
 
 /*
  * This version of gettimeofday has microsecond resolution.
  */
-static inline void __do_gettimeofday(struct timeval *tv, unsigned long tb_val)
+static inline void __do_gettimeofday(struct timeval *tv, u64 tb_val)
 {
-	unsigned long sec, usec, tb_ticks;
-	unsigned long xsec, tb_xsec;
-	struct gettimeofday_vars * temp_varp;
-	unsigned long temp_tb_to_xs, temp_stamp_xsec;
+	unsigned long sec, usec;
+	u64 tb_ticks, xsec;
+	struct gettimeofday_vars *temp_varp;
+	u64 temp_tb_to_xs, temp_stamp_xsec;
 
 	/*
 	 * These calculations are faster (gets rid of divides)
@@ -164,11 +212,10 @@ static inline void __do_gettimeofday(struct timeval *tv, unsigned long tb_val)
 	tb_ticks = tb_val - temp_varp->tb_orig_stamp;
 	temp_tb_to_xs = temp_varp->tb_to_xs;
 	temp_stamp_xsec = temp_varp->stamp_xsec;
-	tb_xsec = mulhdu( tb_ticks, temp_tb_to_xs );
-	xsec = temp_stamp_xsec + tb_xsec;
+	xsec = temp_stamp_xsec + mulhdu(tb_ticks, temp_tb_to_xs);
 	sec = xsec / XSEC_PER_SEC;
-	xsec -= sec * XSEC_PER_SEC;
-	usec = (xsec * USEC_PER_SEC)/XSEC_PER_SEC;
+	usec = (unsigned long)xsec & (XSEC_PER_SEC - 1);
+	usec = SCALE_XSEC(usec, 1000000);
 
 	tv->tv_sec = sec;
 	tv->tv_usec = usec;
@@ -176,6 +223,26 @@ static inline void __do_gettimeofday(struct timeval *tv, unsigned long tb_val)
 
 void do_gettimeofday(struct timeval *tv)
 {
+	if (__USE_RTC()) {
+		/* do this the old way */
+		unsigned long flags, seq;
+		unsigned int sec, nsec, usec, lost;
+
+		do {
+			seq = read_seqbegin_irqsave(&xtime_lock, flags);
+			sec = xtime.tv_sec;
+			nsec = xtime.tv_nsec + tb_ticks_since(tb_last_stamp);
+			lost = jiffies - wall_jiffies;
+		} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
+		usec = nsec / 1000 + lost * (1000000 / HZ);
+		while (usec >= 1000000) {
+			usec -= 1000000;
+			++sec;
+		}
+		tv->tv_sec = sec;
+		tv->tv_usec = usec;
+		return;
+	}
 	__do_gettimeofday(tv, get_tb());
 }
 
@@ -185,6 +252,8 @@ EXPORT_SYMBOL(do_gettimeofday);
 
 static inline void timer_sync_xtime(unsigned long cur_tb)
 {
+#ifdef CONFIG_PPC64
+	/* why do we do this? */
 	struct timeval my_tv;
 
 	__do_gettimeofday(&my_tv, cur_tb);
@@ -193,47 +262,76 @@ static inline void timer_sync_xtime(unsigned long cur_tb)
 		xtime.tv_sec = my_tv.tv_sec;
 		xtime.tv_nsec = my_tv.tv_usec * 1000;
 	}
+#endif
 }
 
 /*
- * When the timebase - tb_orig_stamp gets too big, we do a manipulation
- * between tb_orig_stamp and stamp_xsec. The goal here is to keep the
- * difference tb - tb_orig_stamp small enough to always fit inside a
- * 32 bits number. This is a requirement of our fast 32 bits userland
- * implementation in the vdso. If we "miss" a call to this function
- * (interrupt latency, CPU locked in a spinlock, ...) and we end up
- * with a too big difference, then the vdso will fallback to calling
- * the syscall
+ * There are two copies of tb_to_xs and stamp_xsec so that no
+ * lock is needed to access and use these values in
+ * do_gettimeofday.  We alternate the copies and as long as a
+ * reasonable time elapses between changes, there will never
+ * be inconsistent values.  ntpd has a minimum of one minute
+ * between updates.
  */
-static __inline__ void timer_recalc_offset(unsigned long cur_tb)
+static inline void update_gtod(u64 new_tb_stamp, u64 new_stamp_xsec,
+			       u64 new_tb_to_xs)
 {
-	struct gettimeofday_vars * temp_varp;
 	unsigned temp_idx;
-	unsigned long offset, new_stamp_xsec, new_tb_orig_stamp;
-
-	if (((cur_tb - do_gtod.varp->tb_orig_stamp) & 0x80000000u) == 0)
-		return;
+	struct gettimeofday_vars *temp_varp;
 
 	temp_idx = (do_gtod.var_idx == 0);
 	temp_varp = &do_gtod.vars[temp_idx];
 
-	new_tb_orig_stamp = cur_tb;
-	offset = new_tb_orig_stamp - do_gtod.varp->tb_orig_stamp;
-	new_stamp_xsec = do_gtod.varp->stamp_xsec + mulhdu(offset, do_gtod.varp->tb_to_xs);
-
-	temp_varp->tb_to_xs = do_gtod.varp->tb_to_xs;
-	temp_varp->tb_orig_stamp = new_tb_orig_stamp;
+	temp_varp->tb_to_xs = new_tb_to_xs;
+	temp_varp->tb_orig_stamp = new_tb_stamp;
 	temp_varp->stamp_xsec = new_stamp_xsec;
 	smp_mb();
 	do_gtod.varp = temp_varp;
 	do_gtod.var_idx = temp_idx;
 
-	++(systemcfg->tb_update_count);
+	/*
+	 * tb_update_count is used to allow the userspace gettimeofday code
+	 * to assure itself that it sees a consistent view of the tb_to_xs and
+	 * stamp_xsec variables.  It reads the tb_update_count, then reads
+	 * tb_to_xs and stamp_xsec and then reads tb_update_count again.  If
+	 * the two values of tb_update_count match and are even then the
+	 * tb_to_xs and stamp_xsec values are consistent.  If not, then it
+	 * loops back and reads them again until this criteria is met.
+	 */
+	++(vdso_data->tb_update_count);
 	smp_wmb();
-	systemcfg->tb_orig_stamp = new_tb_orig_stamp;
-	systemcfg->stamp_xsec = new_stamp_xsec;
+	vdso_data->tb_orig_stamp = new_tb_stamp;
+	vdso_data->stamp_xsec = new_stamp_xsec;
+	vdso_data->tb_to_xs = new_tb_to_xs;
+	vdso_data->wtom_clock_sec = wall_to_monotonic.tv_sec;
+	vdso_data->wtom_clock_nsec = wall_to_monotonic.tv_nsec;
 	smp_wmb();
-	++(systemcfg->tb_update_count);
+	++(vdso_data->tb_update_count);
+}
+
+/*
+ * When the timebase - tb_orig_stamp gets too big, we do a manipulation
+ * between tb_orig_stamp and stamp_xsec. The goal here is to keep the
+ * difference tb - tb_orig_stamp small enough to always fit inside a
+ * 32 bits number. This is a requirement of our fast 32 bits userland
+ * implementation in the vdso. If we "miss" a call to this function
+ * (interrupt latency, CPU locked in a spinlock, ...) and we end up
+ * with a too big difference, then the vdso will fallback to calling
+ * the syscall
+ */
+static __inline__ void timer_recalc_offset(u64 cur_tb)
+{
+	unsigned long offset;
+	u64 new_stamp_xsec;
+
+	if (__USE_RTC())
+		return;
+	offset = cur_tb - do_gtod.varp->tb_orig_stamp;
+	if ((offset & 0x80000000u) == 0)
+		return;
+	new_stamp_xsec = do_gtod.varp->stamp_xsec
+		+ mulhdu(offset, do_gtod.varp->tb_to_xs);
+	update_gtod(cur_tb, new_stamp_xsec, do_gtod.varp->tb_to_xs);
 }
 
 #ifdef CONFIG_SMP
@@ -287,8 +385,8 @@ static void iSeries_tb_recal(void)
 				do_gtod.tb_ticks_per_sec = tb_ticks_per_sec;
 				tb_to_xs = divres.result_low;
 				do_gtod.varp->tb_to_xs = tb_to_xs;
-				systemcfg->tb_ticks_per_sec = tb_ticks_per_sec;
-				systemcfg->tb_to_xs = tb_to_xs;
+				vdso_data->tb_ticks_per_sec = tb_ticks_per_sec;
+				vdso_data->tb_to_xs = tb_to_xs;
 			}
 			else {
 				printk( "Titan recalibrate: FAILED (difference > 4 percent)\n"
@@ -313,26 +411,37 @@ static void iSeries_tb_recal(void)
  * call will not be needed)
  */
 
-unsigned long tb_last_stamp __cacheline_aligned_in_smp;
-
 /*
  * timer_interrupt - gets called when the decrementer overflows,
  * with interrupts disabled.
  */
-int timer_interrupt(struct pt_regs * regs)
+void timer_interrupt(struct pt_regs * regs)
 {
 	int next_dec;
-	unsigned long cur_tb;
-	struct paca_struct *lpaca = get_paca();
-	unsigned long cpu = smp_processor_id();
+	int cpu = smp_processor_id();
+	unsigned long ticks;
+
+#ifdef CONFIG_PPC32
+	if (atomic_read(&ppc_n_lost_interrupts) != 0)
+		do_IRQ(regs);
+#endif
 
 	irq_enter();
 
 	profile_tick(CPU_PROFILING, regs);
 
-	lpaca->lppaca.int_dword.fields.decr_int = 0;
+#ifdef CONFIG_PPC_ISERIES
+	get_paca()->lppaca.int_dword.fields.decr_int = 0;
+#endif
+
+	while ((ticks = tb_ticks_since(per_cpu(last_jiffy, cpu)))
+	       >= tb_ticks_per_jiffy) {
+		/* Update last_jiffy */
+		per_cpu(last_jiffy, cpu) += tb_ticks_per_jiffy;
+		/* Handle RTCL overflow on 601 */
+		if (__USE_RTC() && per_cpu(last_jiffy, cpu) >= 1000000000)
+			per_cpu(last_jiffy, cpu) -= 1000000000;
 
-	while (lpaca->next_jiffy_update_tb <= (cur_tb = get_tb())) {
 		/*
 		 * We cannot disable the decrementer, so in the period
 		 * between this cpu's being marked offline in cpu_online_map
@@ -342,27 +451,27 @@ int timer_interrupt(struct pt_regs * regs)
 		 */
 		if (!cpu_is_offline(cpu))
 			update_process_times(user_mode(regs));
+
 		/*
 		 * No need to check whether cpu is offline here; boot_cpuid
 		 * should have been fixed up by now.
 		 */
-		if (cpu == boot_cpuid) {
-			write_seqlock(&xtime_lock);
-			tb_last_stamp = lpaca->next_jiffy_update_tb;
-			timer_recalc_offset(lpaca->next_jiffy_update_tb);
-			do_timer(regs);
-			timer_sync_xtime(lpaca->next_jiffy_update_tb);
-			timer_check_rtc();
-			write_sequnlock(&xtime_lock);
-			if ( adjusting_time && (time_adjust == 0) )
-				ppc_adjtimex();
-		}
-		lpaca->next_jiffy_update_tb += tb_ticks_per_jiffy;
+		if (cpu != boot_cpuid)
+			continue;
+
+		write_seqlock(&xtime_lock);
+		tb_last_jiffy += tb_ticks_per_jiffy;
+		tb_last_stamp = per_cpu(last_jiffy, cpu);
+		timer_recalc_offset(tb_last_jiffy);
+		do_timer(regs);
+		timer_sync_xtime(tb_last_jiffy);
+		timer_check_rtc();
+		write_sequnlock(&xtime_lock);
+		if (adjusting_time && (time_adjust == 0))
+			ppc_adjtimex();
 	}
 	
-	next_dec = lpaca->next_jiffy_update_tb - cur_tb;
-	if (next_dec > lpaca->default_decr)
-        	next_dec = lpaca->default_decr;
+	next_dec = tb_ticks_per_jiffy - ticks;
 	set_dec(next_dec);
 
 #ifdef CONFIG_PPC_ISERIES
@@ -370,17 +479,49 @@ int timer_interrupt(struct pt_regs * regs)
 		process_hvlpevents(regs);
 #endif
 
+#ifdef CONFIG_PPC64
 	/* collect purr register values often, for accurate calculations */
 	if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
 		struct cpu_usage *cu = &__get_cpu_var(cpu_usage_array);
 		cu->current_tb = mfspr(SPRN_PURR);
 	}
+#endif
 
 	irq_exit();
+}
 
-	return 1;
+void wakeup_decrementer(void)
+{
+	int i;
+
+	set_dec(tb_ticks_per_jiffy);
+	/*
+	 * We don't expect this to be called on a machine with a 601,
+	 * so using get_tbl is fine.
+	 */
+	tb_last_stamp = tb_last_jiffy = get_tb();
+	for_each_cpu(i)
+		per_cpu(last_jiffy, i) = tb_last_stamp;
 }
 
+#ifdef CONFIG_SMP
+void __init smp_space_timers(unsigned int max_cpus)
+{
+	int i;
+	unsigned long offset = tb_ticks_per_jiffy / max_cpus;
+	unsigned long previous_tb = per_cpu(last_jiffy, boot_cpuid);
+
+	/* make sure tb > per_cpu(last_jiffy, cpu) for all cpus always */
+	previous_tb -= tb_ticks_per_jiffy;
+	for_each_cpu(i) {
+		if (i != boot_cpuid) {
+			previous_tb += offset;
+			per_cpu(last_jiffy, i) = previous_tb;
+		}
+	}
+}
+#endif
+
 /*
  * Scheduler clock - returns current time in nanosec units.
  *
@@ -390,6 +531,8 @@ int timer_interrupt(struct pt_regs * regs)
  */
 unsigned long long sched_clock(void)
 {
+	if (__USE_RTC())
+		return get_rtc();
 	return mulhdu(get_tb(), tb_to_ns_scale) << tb_to_ns_shift;
 }
 
@@ -398,31 +541,31 @@ int do_settimeofday(struct timespec *tv)
 	time_t wtm_sec, new_sec = tv->tv_sec;
 	long wtm_nsec, new_nsec = tv->tv_nsec;
 	unsigned long flags;
-	unsigned long delta_xsec;
 	long int tb_delta;
-	unsigned long new_xsec;
+	u64 new_xsec, tb_delta_xs;
 
 	if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
 		return -EINVAL;
 
 	write_seqlock_irqsave(&xtime_lock, flags);
-	/* Updating the RTC is not the job of this code. If the time is
-	 * stepped under NTP, the RTC will be update after STA_UNSYNC
-	 * is cleared. Tool like clock/hwclock either copy the RTC
+
+	/*
+	 * Updating the RTC is not the job of this code. If the time is
+	 * stepped under NTP, the RTC will be updated after STA_UNSYNC
+	 * is cleared.  Tools like clock/hwclock either copy the RTC
 	 * to the system time, in which case there is no point in writing
 	 * to the RTC again, or write to the RTC but then they don't call
 	 * settimeofday to perform this operation.
 	 */
 #ifdef CONFIG_PPC_ISERIES
-	if ( first_settimeofday ) {
+	if (first_settimeofday) {
 		iSeries_tb_recal();
 		first_settimeofday = 0;
 	}
 #endif
 	tb_delta = tb_ticks_since(tb_last_stamp);
 	tb_delta += (jiffies - wall_jiffies) * tb_ticks_per_jiffy;
-
-	new_nsec -= tb_delta / tb_ticks_per_usec / 1000;
+	tb_delta_xs = mulhdu(tb_delta, do_gtod.varp->tb_to_xs);
 
 	wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - new_sec);
 	wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - new_nsec);
@@ -437,28 +580,16 @@ int do_settimeofday(struct timespec *tv)
 
 	ntp_clear();
 
-	delta_xsec = mulhdu( (tb_last_stamp-do_gtod.varp->tb_orig_stamp),
-			     do_gtod.varp->tb_to_xs );
-
-	new_xsec = (new_nsec * XSEC_PER_SEC) / NSEC_PER_SEC;
-	new_xsec += new_sec * XSEC_PER_SEC;
-	if ( new_xsec > delta_xsec ) {
-		do_gtod.varp->stamp_xsec = new_xsec - delta_xsec;
-		systemcfg->stamp_xsec = new_xsec - delta_xsec;
-	}
-	else {
-		/* This is only for the case where the user is setting the time
-		 * way back to a time such that the boot time would have been
-		 * before 1970 ... eg. we booted ten days ago, and we are setting
-		 * the time to Jan 5, 1970 */
-		do_gtod.varp->stamp_xsec = new_xsec;
-		do_gtod.varp->tb_orig_stamp = tb_last_stamp;
-		systemcfg->stamp_xsec = new_xsec;
-		systemcfg->tb_orig_stamp = tb_last_stamp;
+	new_xsec = 0;
+	if (new_nsec != 0) {
+		new_xsec = (u64)new_nsec * XSEC_PER_SEC;
+		do_div(new_xsec, NSEC_PER_SEC);
 	}
+	new_xsec += (u64)new_sec * XSEC_PER_SEC - tb_delta_xs;
+	update_gtod(tb_last_jiffy, new_xsec, do_gtod.varp->tb_to_xs);
 
-	systemcfg->tz_minuteswest = sys_tz.tz_minuteswest;
-	systemcfg->tz_dsttime = sys_tz.tz_dsttime;
+	vdso_data->tz_minuteswest = sys_tz.tz_minuteswest;
+	vdso_data->tz_dsttime = sys_tz.tz_dsttime;
 
 	write_sequnlock_irqrestore(&xtime_lock, flags);
 	clock_was_set();
@@ -467,11 +598,9 @@ int do_settimeofday(struct timespec *tv)
 
 EXPORT_SYMBOL(do_settimeofday);
 
-#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_MAPLE) || defined(CONFIG_PPC_BPA)
 void __init generic_calibrate_decr(void)
 {
 	struct device_node *cpu;
-	struct div_result divres;
 	unsigned int *fp;
 	int node_found;
 
@@ -505,37 +634,74 @@ void __init generic_calibrate_decr(void)
 			ppc_proc_freq = *fp;
 		}
 	}
+#ifdef CONFIG_BOOKE
+	/* Set the time base to zero */
+	mtspr(SPRN_TBWL, 0);
+	mtspr(SPRN_TBWU, 0);
+
+	/* Clear any pending timer interrupts */
+	mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
+
+	/* Enable decrementer interrupt */
+	mtspr(SPRN_TCR, TCR_DIE);
+#endif
 	if (!node_found)
 		printk(KERN_ERR "WARNING: Estimating processor frequency "
 				"(not found)\n");
 
 	of_node_put(cpu);
+}
 
-	printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n",
-	       ppc_tb_freq/1000000, ppc_tb_freq%1000000);
-	printk(KERN_INFO "time_init: processor frequency   = %lu.%.6lu MHz\n",
-	       ppc_proc_freq/1000000, ppc_proc_freq%1000000);
-
-	tb_ticks_per_jiffy = ppc_tb_freq / HZ;
-	tb_ticks_per_sec = tb_ticks_per_jiffy * HZ;
-	tb_ticks_per_usec = ppc_tb_freq / 1000000;
-	tb_to_us = mulhwu_scale_factor(ppc_tb_freq, 1000000);
-	div128_by_32(1024*1024, 0, tb_ticks_per_sec, &divres);
-	tb_to_xs = divres.result_low;
+unsigned long get_boot_time(void)
+{
+	struct rtc_time tm;
 
-	setup_default_decr();
+	if (ppc_md.get_boot_time)
+		return ppc_md.get_boot_time();
+	if (!ppc_md.get_rtc_time)
+		return 0;
+	ppc_md.get_rtc_time(&tm);
+	return mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday,
+		      tm.tm_hour, tm.tm_min, tm.tm_sec);
 }
-#endif
 
+/* This function is only called on the boot processor */
 void __init time_init(void)
 {
-	/* This function is only called on the boot processor */
 	unsigned long flags;
-	struct rtc_time tm;
+	unsigned long tm = 0;
 	struct div_result res;
-	unsigned long scale, shift;
+	u64 scale;
+	unsigned shift;
+
+        if (ppc_md.time_init != NULL)
+                timezone_offset = ppc_md.time_init();
+
+	if (__USE_RTC()) {
+		/* 601 processor: dec counts down by 128 every 128ns */
+		ppc_tb_freq = 1000000000;
+		tb_last_stamp = get_rtcl();
+		tb_last_jiffy = tb_last_stamp;
+	} else {
+		/* Normal PowerPC with timebase register */
+		ppc_md.calibrate_decr();
+		printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n",
+		       ppc_tb_freq / 1000000, ppc_tb_freq % 1000000);
+		printk(KERN_INFO "time_init: processor frequency   = %lu.%.6lu MHz\n",
+		       ppc_proc_freq / 1000000, ppc_proc_freq % 1000000);
+		tb_last_stamp = tb_last_jiffy = get_tb();
+	}
 
-	ppc_md.calibrate_decr();
+	tb_ticks_per_jiffy = ppc_tb_freq / HZ;
+	tb_ticks_per_sec = tb_ticks_per_jiffy * HZ;
+	tb_ticks_per_usec = ppc_tb_freq / 1000000;
+	tb_to_us = mulhwu_scale_factor(ppc_tb_freq, 1000000);
+	div128_by_32(1024*1024, 0, tb_ticks_per_sec, &res);
+	tb_to_xs = res.result_low;
+
+#ifdef CONFIG_PPC64
+	get_paca()->default_decr = tb_ticks_per_jiffy;
+#endif
 
 	/*
 	 * Compute scale factor for sched_clock.
@@ -559,29 +725,35 @@ void __init time_init(void)
 #ifdef CONFIG_PPC_ISERIES
 	if (!piranha_simulator)
 #endif
-		ppc_md.get_boot_time(&tm);
+		tm = get_boot_time();
 
 	write_seqlock_irqsave(&xtime_lock, flags);
-	xtime.tv_sec = mktime(tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday,
-			      tm.tm_hour, tm.tm_min, tm.tm_sec);
-	tb_last_stamp = get_tb();
+	xtime.tv_sec = tm;
+	xtime.tv_nsec = 0;
 	do_gtod.varp = &do_gtod.vars[0];
 	do_gtod.var_idx = 0;
-	do_gtod.varp->tb_orig_stamp = tb_last_stamp;
-	get_paca()->next_jiffy_update_tb = tb_last_stamp + tb_ticks_per_jiffy;
-	do_gtod.varp->stamp_xsec = xtime.tv_sec * XSEC_PER_SEC;
+	do_gtod.varp->tb_orig_stamp = tb_last_jiffy;
+	__get_cpu_var(last_jiffy) = tb_last_stamp;
+	do_gtod.varp->stamp_xsec = (u64) xtime.tv_sec * XSEC_PER_SEC;
 	do_gtod.tb_ticks_per_sec = tb_ticks_per_sec;
 	do_gtod.varp->tb_to_xs = tb_to_xs;
 	do_gtod.tb_to_us = tb_to_us;
-	systemcfg->tb_orig_stamp = tb_last_stamp;
-	systemcfg->tb_update_count = 0;
-	systemcfg->tb_ticks_per_sec = tb_ticks_per_sec;
-	systemcfg->stamp_xsec = xtime.tv_sec * XSEC_PER_SEC;
-	systemcfg->tb_to_xs = tb_to_xs;
+
+	vdso_data->tb_orig_stamp = tb_last_jiffy;
+	vdso_data->tb_update_count = 0;
+	vdso_data->tb_ticks_per_sec = tb_ticks_per_sec;
+	vdso_data->stamp_xsec = xtime.tv_sec * XSEC_PER_SEC;
+	vdso_data->tb_to_xs = tb_to_xs;
 
 	time_freq = 0;
 
-	xtime.tv_nsec = 0;
+	/* If platform provided a timezone (pmac), we correct the time */
+        if (timezone_offset) {
+		sys_tz.tz_minuteswest = -timezone_offset / 60;
+		sys_tz.tz_dsttime = 0;
+		xtime.tv_sec -= timezone_offset;
+        }
+
 	last_rtc_update = xtime.tv_sec;
 	set_normalized_timespec(&wall_to_monotonic,
 	                        -xtime.tv_sec, -xtime.tv_nsec);
@@ -604,25 +776,28 @@ void __init time_init(void)
 
 void ppc_adjtimex(void)
 {
-	unsigned long den, new_tb_ticks_per_sec, tb_ticks, old_xsec, new_tb_to_xs, new_xsec, new_stamp_xsec;
+#ifdef CONFIG_PPC64
+	unsigned long den, new_tb_ticks_per_sec, tb_ticks, old_xsec,
+		new_tb_to_xs, new_xsec, new_stamp_xsec;
 	unsigned long tb_ticks_per_sec_delta;
 	long delta_freq, ltemp;
 	struct div_result divres; 
 	unsigned long flags;
-	struct gettimeofday_vars * temp_varp;
-	unsigned temp_idx;
 	long singleshot_ppm = 0;
 
-	/* Compute parts per million frequency adjustment to accomplish the time adjustment
-	   implied by time_offset to be applied over the elapsed time indicated by time_constant.
-	   Use SHIFT_USEC to get it into the same units as time_freq. */
+	/*
+	 * Compute parts per million frequency adjustment to
+	 * accomplish the time adjustment implied by time_offset to be
+	 * applied over the elapsed time indicated by time_constant.
+	 * Use SHIFT_USEC to get it into the same units as
+	 * time_freq.
+	 */
 	if ( time_offset < 0 ) {
 		ltemp = -time_offset;
 		ltemp <<= SHIFT_USEC - SHIFT_UPDATE;
 		ltemp >>= SHIFT_KG + time_constant;
 		ltemp = -ltemp;
-	}
-	else {
+	} else {
 		ltemp = time_offset;
 		ltemp <<= SHIFT_USEC - SHIFT_UPDATE;
 		ltemp >>= SHIFT_KG + time_constant;
@@ -639,7 +814,10 @@ void ppc_adjtimex(void)
 	
 		adjusting_time = 1;
 		
-		/* Compute parts per million frequency adjustment to match time_adjust */
+		/*
+		 * Compute parts per million frequency adjustment
+		 * to match time_adjust
+		 */
 		singleshot_ppm = tickadj * HZ;	
 		/*
 		 * The adjustment should be tickadj*HZ to match the code in
@@ -647,7 +825,7 @@ void ppc_adjtimex(void)
 		 * large. 3/4 of tickadj*HZ seems about right
 		 */
 		singleshot_ppm -= singleshot_ppm / 4;
-		/* Use SHIFT_USEC to get it into the same units as time_freq */	
+		/* Use SHIFT_USEC to get it into the same units as time_freq */
 		singleshot_ppm <<= SHIFT_USEC;
 		if ( time_adjust < 0 )
 			singleshot_ppm = -singleshot_ppm;
@@ -663,7 +841,10 @@ void ppc_adjtimex(void)
 	/* Add up all of the frequency adjustments */
 	delta_freq = time_freq + ltemp + singleshot_ppm;
 	
-	/* Compute a new value for tb_ticks_per_sec based on the frequency adjustment */
+	/*
+	 * Compute a new value for tb_ticks_per_sec based on
+	 * the frequency adjustment
+	 */
 	den = 1000000 * (1 << (SHIFT_USEC - 8));
 	if ( delta_freq < 0 ) {
 		tb_ticks_per_sec_delta = ( tb_ticks_per_sec * ( (-delta_freq) >> (SHIFT_USEC - 8))) / den;
@@ -678,61 +859,37 @@ void ppc_adjtimex(void)
 	printk("ppc_adjtimex: ltemp = %ld, time_freq = %ld, singleshot_ppm = %ld\n", ltemp, time_freq, singleshot_ppm);
 	printk("ppc_adjtimex: tb_ticks_per_sec - base = %ld  new = %ld\n", tb_ticks_per_sec, new_tb_ticks_per_sec);
 #endif
-				
-	/* Compute a new value of tb_to_xs (used to convert tb to microseconds and a new value of 
-	   stamp_xsec which is the time (in 1/2^20 second units) corresponding to tb_orig_stamp.  This 
-	   new value of stamp_xsec compensates for the change in frequency (implied by the new tb_to_xs)
-	   which guarantees that the current time remains the same */ 
+
+	/*
+	 * Compute a new value of tb_to_xs (used to convert tb to
+	 * microseconds) and a new value of stamp_xsec which is the
+	 * time (in 1/2^20 second units) corresponding to
+	 * tb_orig_stamp.  This new value of stamp_xsec compensates
+	 * for the change in frequency (implied by the new tb_to_xs)
+	 * which guarantees that the current time remains the same.
+	 */
 	write_seqlock_irqsave( &xtime_lock, flags );
 	tb_ticks = get_tb() - do_gtod.varp->tb_orig_stamp;
-	div128_by_32( 1024*1024, 0, new_tb_ticks_per_sec, &divres );
+	div128_by_32(1024*1024, 0, new_tb_ticks_per_sec, &divres);
 	new_tb_to_xs = divres.result_low;
-	new_xsec = mulhdu( tb_ticks, new_tb_to_xs );
+	new_xsec = mulhdu(tb_ticks, new_tb_to_xs);
 
-	old_xsec = mulhdu( tb_ticks, do_gtod.varp->tb_to_xs );
+	old_xsec = mulhdu(tb_ticks, do_gtod.varp->tb_to_xs);
 	new_stamp_xsec = do_gtod.varp->stamp_xsec + old_xsec - new_xsec;
 
-	/* There are two copies of tb_to_xs and stamp_xsec so that no lock is needed to access and use these
-	   values in do_gettimeofday.  We alternate the copies and as long as a reasonable time elapses between
-	   changes, there will never be inconsistent values.  ntpd has a minimum of one minute between updates */
-
-	temp_idx = (do_gtod.var_idx == 0);
-	temp_varp = &do_gtod.vars[temp_idx];
-
-	temp_varp->tb_to_xs = new_tb_to_xs;
-	temp_varp->stamp_xsec = new_stamp_xsec;
-	temp_varp->tb_orig_stamp = do_gtod.varp->tb_orig_stamp;
-	smp_mb();
-	do_gtod.varp = temp_varp;
-	do_gtod.var_idx = temp_idx;
-
-	/*
-	 * tb_update_count is used to allow the problem state gettimeofday code
-	 * to assure itself that it sees a consistent view of the tb_to_xs and
-	 * stamp_xsec variables.  It reads the tb_update_count, then reads
-	 * tb_to_xs and stamp_xsec and then reads tb_update_count again.  If
-	 * the two values of tb_update_count match and are even then the
-	 * tb_to_xs and stamp_xsec values are consistent.  If not, then it
-	 * loops back and reads them again until this criteria is met.
-	 */
-	++(systemcfg->tb_update_count);
-	smp_wmb();
-	systemcfg->tb_to_xs = new_tb_to_xs;
-	systemcfg->stamp_xsec = new_stamp_xsec;
-	smp_wmb();
-	++(systemcfg->tb_update_count);
+	update_gtod(do_gtod.varp->tb_orig_stamp, new_stamp_xsec, new_tb_to_xs);
 
 	write_sequnlock_irqrestore( &xtime_lock, flags );
-
+#endif /* CONFIG_PPC64 */
 }
 
 
-#define TICK_SIZE tick
 #define FEBRUARY	2
 #define	STARTOFTIME	1970
 #define SECDAY		86400L
 #define SECYR		(SECDAY * 365)
-#define	leapyear(year)		((year) % 4 == 0)
+#define	leapyear(year)		((year) % 4 == 0 && \
+				 ((year) % 100 != 0 || (year) % 400 == 0))
 #define	days_in_year(a) 	(leapyear(a) ? 366 : 365)
 #define	days_in_month(a) 	(month_days[(a) - 1])
 
@@ -750,37 +907,25 @@ void GregorianDay(struct rtc_time * tm)
 	int day;
 	int MonthOffset[] = { 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334 };
 
-	lastYear=tm->tm_year-1;
+	lastYear = tm->tm_year - 1;
 
 	/*
 	 * Number of leap corrections to apply up to end of last year
 	 */
-	leapsToDate = lastYear/4 - lastYear/100 + lastYear/400;
+	leapsToDate = lastYear / 4 - lastYear / 100 + lastYear / 400;
 
 	/*
 	 * This year is a leap year if it is divisible by 4 except when it is
 	 * divisible by 100 unless it is divisible by 400
 	 *
-	 * e.g. 1904 was a leap year, 1900 was not, 1996 is, and 2000 will be
+	 * e.g. 1904 was a leap year, 1900 was not, 1996 is, and 2000 was
 	 */
-	if((tm->tm_year%4==0) &&
-	   ((tm->tm_year%100!=0) || (tm->tm_year%400==0)) &&
-	   (tm->tm_mon>2))
-	{
-		/*
-		 * We are past Feb. 29 in a leap year
-		 */
-		day=1;
-	}
-	else
-	{
-		day=0;
-	}
+	day = tm->tm_mon > 2 && leapyear(tm->tm_year);
 
 	day += lastYear*365 + leapsToDate + MonthOffset[tm->tm_mon-1] +
 		   tm->tm_mday;
 
-	tm->tm_wday=day%7;
+	tm->tm_wday = day % 7;
 }
 
 void to_tm(int tim, struct rtc_time * tm)
@@ -826,14 +971,16 @@ void to_tm(int tim, struct rtc_time * tm)
  * oscillators and the precision with which the timebase frequency
  * is measured but does not harm.
  */
-unsigned mulhwu_scale_factor(unsigned inscale, unsigned outscale) {
+unsigned mulhwu_scale_factor(unsigned inscale, unsigned outscale)
+{
         unsigned mlt=0, tmp, err;
         /* No concern for performance, it's done once: use a stupid
          * but safe and compact method to find the multiplier.
          */
   
         for (tmp = 1U<<31; tmp != 0; tmp >>= 1) {
-                if (mulhwu(inscale, mlt|tmp) < outscale) mlt|=tmp;
+                if (mulhwu(inscale, mlt|tmp) < outscale)
+			mlt |= tmp;
         }
   
         /* We might still be off by 1 for the best approximation.
@@ -843,39 +990,41 @@ unsigned mulhwu_scale_factor(unsigned inscale, unsigned outscale) {
          * some might have been forgotten in the test however.
          */
   
-        err = inscale*(mlt+1);
-        if (err <= inscale/2) mlt++;
+        err = inscale * (mlt+1);
+        if (err <= inscale/2)
+		mlt++;
         return mlt;
-  }
+}
 
 /*
  * Divide a 128-bit dividend by a 32-bit divisor, leaving a 128 bit
  * result.
  */
-
-void div128_by_32( unsigned long dividend_high, unsigned long dividend_low,
-		   unsigned divisor, struct div_result *dr )
+void div128_by_32(u64 dividend_high, u64 dividend_low,
+		  unsigned divisor, struct div_result *dr)
 {
-	unsigned long a,b,c,d, w,x,y,z, ra,rb,rc;
+	unsigned long a, b, c, d;
+	unsigned long w, x, y, z;
+	u64 ra, rb, rc;
 
 	a = dividend_high >> 32;
 	b = dividend_high & 0xffffffff;
 	c = dividend_low >> 32;
 	d = dividend_low & 0xffffffff;
 
-	w = a/divisor;
-	ra = (a - (w * divisor)) << 32;
+	w = a / divisor;
+	ra = ((u64)(a - (w * divisor)) << 32) + b;
 
-	x = (ra + b)/divisor;
-	rb = ((ra + b) - (x * divisor)) << 32;
+	rb = ((u64) do_div(ra, divisor) << 32) + c;
+	x = ra;
 
-	y = (rb + c)/divisor;
-	rc = ((rb + b) - (y * divisor)) << 32;
+	rc = ((u64) do_div(rb, divisor) << 32) + d;
+	y = rb;
 
-	z = (rc + d)/divisor;
+	do_div(rc, divisor);
+	z = rc;
 
-	dr->result_high = (w << 32) + x;
-	dr->result_low  = (y << 32) + z;
+	dr->result_high = ((u64)w << 32) + x;
+	dr->result_low  = ((u64)y << 32) + z;
 
 }
-
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
new file mode 100644
index 000000000000..1511454c4690
--- /dev/null
+++ b/arch/powerpc/kernel/traps.c
@@ -0,0 +1,1085 @@
+/*
+ *  Copyright (C) 1995-1996  Gary Thomas (gdt@linuxppc.org)
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ *  Modified by Cort Dougan (cort@cs.nmt.edu)
+ *  and Paul Mackerras (paulus@samba.org)
+ */
+
+/*
+ * This file handles the architecture-dependent parts of hardware exceptions
+ */
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/a.out.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/prctl.h>
+#include <linux/delay.h>
+#include <linux/kprobes.h>
+
+#include <asm/kdebug.h>
+#include <asm/pgtable.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/rtas.h>
+#include <asm/pmc.h>
+#ifdef CONFIG_PPC32
+#include <asm/reg.h>
+#endif
+#ifdef CONFIG_PMAC_BACKLIGHT
+#include <asm/backlight.h>
+#endif
+#ifdef CONFIG_PPC64
+#include <asm/firmware.h>
+#include <asm/processor.h>
+#endif
+
+#ifdef CONFIG_PPC64	/* XXX */
+#define _IO_BASE	pci_io_base
+#endif
+
+#ifdef CONFIG_DEBUGGER
+int (*__debugger)(struct pt_regs *regs);
+int (*__debugger_ipi)(struct pt_regs *regs);
+int (*__debugger_bpt)(struct pt_regs *regs);
+int (*__debugger_sstep)(struct pt_regs *regs);
+int (*__debugger_iabr_match)(struct pt_regs *regs);
+int (*__debugger_dabr_match)(struct pt_regs *regs);
+int (*__debugger_fault_handler)(struct pt_regs *regs);
+
+EXPORT_SYMBOL(__debugger);
+EXPORT_SYMBOL(__debugger_ipi);
+EXPORT_SYMBOL(__debugger_bpt);
+EXPORT_SYMBOL(__debugger_sstep);
+EXPORT_SYMBOL(__debugger_iabr_match);
+EXPORT_SYMBOL(__debugger_dabr_match);
+EXPORT_SYMBOL(__debugger_fault_handler);
+#endif
+
+struct notifier_block *powerpc_die_chain;
+static DEFINE_SPINLOCK(die_notifier_lock);
+
+int register_die_notifier(struct notifier_block *nb)
+{
+	int err = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&die_notifier_lock, flags);
+	err = notifier_chain_register(&powerpc_die_chain, nb);
+	spin_unlock_irqrestore(&die_notifier_lock, flags);
+	return err;
+}
+
+/*
+ * Trap & Exception support
+ */
+
+static DEFINE_SPINLOCK(die_lock);
+
+int die(const char *str, struct pt_regs *regs, long err)
+{
+	static int die_counter;
+	int nl = 0;
+
+	if (debugger(regs))
+		return 1;
+
+	console_verbose();
+	spin_lock_irq(&die_lock);
+	bust_spinlocks(1);
+#ifdef CONFIG_PMAC_BACKLIGHT
+	if (_machine == _MACH_Pmac) {
+		set_backlight_enable(1);
+		set_backlight_level(BACKLIGHT_MAX);
+	}
+#endif
+	printk("Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter);
+#ifdef CONFIG_PREEMPT
+	printk("PREEMPT ");
+	nl = 1;
+#endif
+#ifdef CONFIG_SMP
+	printk("SMP NR_CPUS=%d ", NR_CPUS);
+	nl = 1;
+#endif
+#ifdef CONFIG_DEBUG_PAGEALLOC
+	printk("DEBUG_PAGEALLOC ");
+	nl = 1;
+#endif
+#ifdef CONFIG_NUMA
+	printk("NUMA ");
+	nl = 1;
+#endif
+#ifdef CONFIG_PPC64
+	switch (_machine) {
+	case PLATFORM_PSERIES:
+		printk("PSERIES ");
+		nl = 1;
+		break;
+	case PLATFORM_PSERIES_LPAR:
+		printk("PSERIES LPAR ");
+		nl = 1;
+		break;
+	case PLATFORM_ISERIES_LPAR:
+		printk("ISERIES LPAR ");
+		nl = 1;
+		break;
+	case PLATFORM_POWERMAC:
+		printk("POWERMAC ");
+		nl = 1;
+		break;
+	case PLATFORM_CELL:
+		printk("CELL ");
+		nl = 1;
+		break;
+	}
+#endif
+	if (nl)
+		printk("\n");
+	print_modules();
+	show_regs(regs);
+	bust_spinlocks(0);
+	spin_unlock_irq(&die_lock);
+
+	if (in_interrupt())
+		panic("Fatal exception in interrupt");
+
+	if (panic_on_oops) {
+#ifdef CONFIG_PPC64
+		printk(KERN_EMERG "Fatal exception: panic in 5 seconds\n");
+		ssleep(5);
+#endif
+		panic("Fatal exception");
+	}
+	do_exit(err);
+
+	return 0;
+}
+
+void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr)
+{
+	siginfo_t info;
+
+	if (!user_mode(regs)) {
+		if (die("Exception in kernel mode", regs, signr))
+			return;
+	}
+
+	memset(&info, 0, sizeof(info));
+	info.si_signo = signr;
+	info.si_code = code;
+	info.si_addr = (void __user *) addr;
+	force_sig_info(signr, &info, current);
+
+	/*
+	 * Init gets no signals that it doesn't have a handler for.
+	 * That's all very well, but if it has caused a synchronous
+	 * exception and we ignore the resulting signal, it will just
+	 * generate the same exception over and over again and we get
+	 * nowhere.  Better to kill it and let the kernel panic.
+	 */
+	if (current->pid == 1) {
+		__sighandler_t handler;
+
+		spin_lock_irq(&current->sighand->siglock);
+		handler = current->sighand->action[signr-1].sa.sa_handler;
+		spin_unlock_irq(&current->sighand->siglock);
+		if (handler == SIG_DFL) {
+			/* init has generated a synchronous exception
+			   and it doesn't have a handler for the signal */
+			printk(KERN_CRIT "init has generated signal %d "
+			       "but has no handler for it\n", signr);
+			do_exit(signr);
+		}
+	}
+}
+
+#ifdef CONFIG_PPC64
+void system_reset_exception(struct pt_regs *regs)
+{
+	/* See if any machine dependent calls */
+	if (ppc_md.system_reset_exception)
+		ppc_md.system_reset_exception(regs);
+
+	die("System Reset", regs, SIGABRT);
+
+	/* Must die if the interrupt is not recoverable */
+	if (!(regs->msr & MSR_RI))
+		panic("Unrecoverable System Reset");
+
+	/* What should we do here? We could issue a shutdown or hard reset. */
+}
+#endif
+
+/*
+ * I/O accesses can cause machine checks on powermacs.
+ * Check if the NIP corresponds to the address of a sync
+ * instruction for which there is an entry in the exception
+ * table.
+ * Note that the 601 only takes a machine check on TEA
+ * (transfer error ack) signal assertion, and does not
+ * set any of the top 16 bits of SRR1.
+ *  -- paulus.
+ */
+static inline int check_io_access(struct pt_regs *regs)
+{
+#ifdef CONFIG_PPC_PMAC
+	unsigned long msr = regs->msr;
+	const struct exception_table_entry *entry;
+	unsigned int *nip = (unsigned int *)regs->nip;
+
+	if (((msr & 0xffff0000) == 0 || (msr & (0x80000 | 0x40000)))
+	    && (entry = search_exception_tables(regs->nip)) != NULL) {
+		/*
+		 * Check that it's a sync instruction, or somewhere
+		 * in the twi; isync; nop sequence that inb/inw/inl uses.
+		 * As the address is in the exception table
+		 * we should be able to read the instr there.
+		 * For the debug message, we look at the preceding
+		 * load or store.
+		 */
+		if (*nip == 0x60000000)		/* nop */
+			nip -= 2;
+		else if (*nip == 0x4c00012c)	/* isync */
+			--nip;
+		if (*nip == 0x7c0004ac || (*nip >> 26) == 3) {
+			/* sync or twi */
+			unsigned int rb;
+
+			--nip;
+			rb = (*nip >> 11) & 0x1f;
+			printk(KERN_DEBUG "%s bad port %lx at %p\n",
+			       (*nip & 0x100)? "OUT to": "IN from",
+			       regs->gpr[rb] - _IO_BASE, nip);
+			regs->msr |= MSR_RI;
+			regs->nip = entry->fixup;
+			return 1;
+		}
+	}
+#endif /* CONFIG_PPC_PMAC */
+	return 0;
+}
+
+#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+/* On 4xx, the reason for the machine check or program exception
+   is in the ESR. */
+#define get_reason(regs)	((regs)->dsisr)
+#ifndef CONFIG_FSL_BOOKE
+#define get_mc_reason(regs)	((regs)->dsisr)
+#else
+#define get_mc_reason(regs)	(mfspr(SPRN_MCSR))
+#endif
+#define REASON_FP		ESR_FP
+#define REASON_ILLEGAL		(ESR_PIL | ESR_PUO)
+#define REASON_PRIVILEGED	ESR_PPR
+#define REASON_TRAP		ESR_PTR
+
+/* single-step stuff */
+#define single_stepping(regs)	(current->thread.dbcr0 & DBCR0_IC)
+#define clear_single_step(regs)	(current->thread.dbcr0 &= ~DBCR0_IC)
+
+#else
+/* On non-4xx, the reason for the machine check or program
+   exception is in the MSR. */
+#define get_reason(regs)	((regs)->msr)
+#define get_mc_reason(regs)	((regs)->msr)
+#define REASON_FP		0x100000
+#define REASON_ILLEGAL		0x80000
+#define REASON_PRIVILEGED	0x40000
+#define REASON_TRAP		0x20000
+
+#define single_stepping(regs)	((regs)->msr & MSR_SE)
+#define clear_single_step(regs)	((regs)->msr &= ~MSR_SE)
+#endif
+
+/*
+ * This is "fall-back" implementation for configurations
+ * which don't provide platform-specific machine check info
+ */
+void __attribute__ ((weak))
+platform_machine_check(struct pt_regs *regs)
+{
+}
+
+void machine_check_exception(struct pt_regs *regs)
+{
+#ifdef CONFIG_PPC64
+	int recover = 0;
+
+	/* See if any machine dependent calls */
+	if (ppc_md.machine_check_exception)
+		recover = ppc_md.machine_check_exception(regs);
+
+	if (recover)
+		return;
+#else
+	unsigned long reason = get_mc_reason(regs);
+
+	if (user_mode(regs)) {
+		regs->msr |= MSR_RI;
+		_exception(SIGBUS, regs, BUS_ADRERR, regs->nip);
+		return;
+	}
+
+#if defined(CONFIG_8xx) && defined(CONFIG_PCI)
+	/* the qspan pci read routines can cause machine checks -- Cort */
+	bad_page_fault(regs, regs->dar, SIGBUS);
+	return;
+#endif
+
+	if (debugger_fault_handler(regs)) {
+		regs->msr |= MSR_RI;
+		return;
+	}
+
+	if (check_io_access(regs))
+		return;
+
+#if defined(CONFIG_4xx) && !defined(CONFIG_440A)
+	if (reason & ESR_IMCP) {
+		printk("Instruction");
+		mtspr(SPRN_ESR, reason & ~ESR_IMCP);
+	} else
+		printk("Data");
+	printk(" machine check in kernel mode.\n");
+#elif defined(CONFIG_440A)
+	printk("Machine check in kernel mode.\n");
+	if (reason & ESR_IMCP){
+		printk("Instruction Synchronous Machine Check exception\n");
+		mtspr(SPRN_ESR, reason & ~ESR_IMCP);
+	}
+	else {
+		u32 mcsr = mfspr(SPRN_MCSR);
+		if (mcsr & MCSR_IB)
+			printk("Instruction Read PLB Error\n");
+		if (mcsr & MCSR_DRB)
+			printk("Data Read PLB Error\n");
+		if (mcsr & MCSR_DWB)
+			printk("Data Write PLB Error\n");
+		if (mcsr & MCSR_TLBP)
+			printk("TLB Parity Error\n");
+		if (mcsr & MCSR_ICP){
+			flush_instruction_cache();
+			printk("I-Cache Parity Error\n");
+		}
+		if (mcsr & MCSR_DCSP)
+			printk("D-Cache Search Parity Error\n");
+		if (mcsr & MCSR_DCFP)
+			printk("D-Cache Flush Parity Error\n");
+		if (mcsr & MCSR_IMPE)
+			printk("Machine Check exception is imprecise\n");
+
+		/* Clear MCSR */
+		mtspr(SPRN_MCSR, mcsr);
+	}
+#elif defined (CONFIG_E500)
+	printk("Machine check in kernel mode.\n");
+	printk("Caused by (from MCSR=%lx): ", reason);
+
+	if (reason & MCSR_MCP)
+		printk("Machine Check Signal\n");
+	if (reason & MCSR_ICPERR)
+		printk("Instruction Cache Parity Error\n");
+	if (reason & MCSR_DCP_PERR)
+		printk("Data Cache Push Parity Error\n");
+	if (reason & MCSR_DCPERR)
+		printk("Data Cache Parity Error\n");
+	if (reason & MCSR_GL_CI)
+		printk("Guarded Load or Cache-Inhibited stwcx.\n");
+	if (reason & MCSR_BUS_IAERR)
+		printk("Bus - Instruction Address Error\n");
+	if (reason & MCSR_BUS_RAERR)
+		printk("Bus - Read Address Error\n");
+	if (reason & MCSR_BUS_WAERR)
+		printk("Bus - Write Address Error\n");
+	if (reason & MCSR_BUS_IBERR)
+		printk("Bus - Instruction Data Error\n");
+	if (reason & MCSR_BUS_RBERR)
+		printk("Bus - Read Data Bus Error\n");
+	if (reason & MCSR_BUS_WBERR)
+		printk("Bus - Read Data Bus Error\n");
+	if (reason & MCSR_BUS_IPERR)
+		printk("Bus - Instruction Parity Error\n");
+	if (reason & MCSR_BUS_RPERR)
+		printk("Bus - Read Parity Error\n");
+#elif defined (CONFIG_E200)
+	printk("Machine check in kernel mode.\n");
+	printk("Caused by (from MCSR=%lx): ", reason);
+
+	if (reason & MCSR_MCP)
+		printk("Machine Check Signal\n");
+	if (reason & MCSR_CP_PERR)
+		printk("Cache Push Parity Error\n");
+	if (reason & MCSR_CPERR)
+		printk("Cache Parity Error\n");
+	if (reason & MCSR_EXCP_ERR)
+		printk("ISI, ITLB, or Bus Error on first instruction fetch for an exception handler\n");
+	if (reason & MCSR_BUS_IRERR)
+		printk("Bus - Read Bus Error on instruction fetch\n");
+	if (reason & MCSR_BUS_DRERR)
+		printk("Bus - Read Bus Error on data load\n");
+	if (reason & MCSR_BUS_WRERR)
+		printk("Bus - Write Bus Error on buffered store or cache line push\n");
+#else /* !CONFIG_4xx && !CONFIG_E500 && !CONFIG_E200 */
+	printk("Machine check in kernel mode.\n");
+	printk("Caused by (from SRR1=%lx): ", reason);
+	switch (reason & 0x601F0000) {
+	case 0x80000:
+		printk("Machine check signal\n");
+		break;
+	case 0:		/* for 601 */
+	case 0x40000:
+	case 0x140000:	/* 7450 MSS error and TEA */
+		printk("Transfer error ack signal\n");
+		break;
+	case 0x20000:
+		printk("Data parity error signal\n");
+		break;
+	case 0x10000:
+		printk("Address parity error signal\n");
+		break;
+	case 0x20000000:
+		printk("L1 Data Cache error\n");
+		break;
+	case 0x40000000:
+		printk("L1 Instruction Cache error\n");
+		break;
+	case 0x00100000:
+		printk("L2 data cache parity error\n");
+		break;
+	default:
+		printk("Unknown values in msr\n");
+	}
+#endif /* CONFIG_4xx */
+
+	/*
+	 * Optional platform-provided routine to print out
+	 * additional info, e.g. bus error registers.
+	 */
+	platform_machine_check(regs);
+#endif /* CONFIG_PPC64 */
+
+	if (debugger_fault_handler(regs))
+		return;
+	die("Machine check", regs, SIGBUS);
+
+	/* Must die if the interrupt is not recoverable */
+	if (!(regs->msr & MSR_RI))
+		panic("Unrecoverable Machine check");
+}
+
+void SMIException(struct pt_regs *regs)
+{
+	die("System Management Interrupt", regs, SIGABRT);
+}
+
+void unknown_exception(struct pt_regs *regs)
+{
+	printk("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
+	       regs->nip, regs->msr, regs->trap);
+
+	_exception(SIGTRAP, regs, 0, 0);
+}
+
+void instruction_breakpoint_exception(struct pt_regs *regs)
+{
+	if (notify_die(DIE_IABR_MATCH, "iabr_match", regs, 5,
+					5, SIGTRAP) == NOTIFY_STOP)
+		return;
+	if (debugger_iabr_match(regs))
+		return;
+	_exception(SIGTRAP, regs, TRAP_BRKPT, regs->nip);
+}
+
+void RunModeException(struct pt_regs *regs)
+{
+	_exception(SIGTRAP, regs, 0, 0);
+}
+
+void __kprobes single_step_exception(struct pt_regs *regs)
+{
+	regs->msr &= ~(MSR_SE | MSR_BE);  /* Turn off 'trace' bits */
+
+	if (notify_die(DIE_SSTEP, "single_step", regs, 5,
+					5, SIGTRAP) == NOTIFY_STOP)
+		return;
+	if (debugger_sstep(regs))
+		return;
+
+	_exception(SIGTRAP, regs, TRAP_TRACE, regs->nip);
+}
+
+/*
+ * After we have successfully emulated an instruction, we have to
+ * check if the instruction was being single-stepped, and if so,
+ * pretend we got a single-step exception.  This was pointed out
+ * by Kumar Gala.  -- paulus
+ */
+static void emulate_single_step(struct pt_regs *regs)
+{
+	if (single_stepping(regs)) {
+		clear_single_step(regs);
+		_exception(SIGTRAP, regs, TRAP_TRACE, 0);
+	}
+}
+
+static void parse_fpe(struct pt_regs *regs)
+{
+	int code = 0;
+	unsigned long fpscr;
+
+	flush_fp_to_thread(current);
+
+	fpscr = current->thread.fpscr.val;
+
+	/* Invalid operation */
+	if ((fpscr & FPSCR_VE) && (fpscr & FPSCR_VX))
+		code = FPE_FLTINV;
+
+	/* Overflow */
+	else if ((fpscr & FPSCR_OE) && (fpscr & FPSCR_OX))
+		code = FPE_FLTOVF;
+
+	/* Underflow */
+	else if ((fpscr & FPSCR_UE) && (fpscr & FPSCR_UX))
+		code = FPE_FLTUND;
+
+	/* Divide by zero */
+	else if ((fpscr & FPSCR_ZE) && (fpscr & FPSCR_ZX))
+		code = FPE_FLTDIV;
+
+	/* Inexact result */
+	else if ((fpscr & FPSCR_XE) && (fpscr & FPSCR_XX))
+		code = FPE_FLTRES;
+
+	_exception(SIGFPE, regs, code, regs->nip);
+}
+
+/*
+ * Illegal instruction emulation support.  Originally written to
+ * provide the PVR to user applications using the mfspr rd, PVR.
+ * Return non-zero if we can't emulate, or -EFAULT if the associated
+ * memory access caused an access fault.  Return zero on success.
+ *
+ * There are a couple of ways to do this, either "decode" the instruction
+ * or directly match lots of bits.  In this case, matching lots of
+ * bits is faster and easier.
+ *
+ */
+#define INST_MFSPR_PVR		0x7c1f42a6
+#define INST_MFSPR_PVR_MASK	0xfc1fffff
+
+#define INST_DCBA		0x7c0005ec
+#define INST_DCBA_MASK		0x7c0007fe
+
+#define INST_MCRXR		0x7c000400
+#define INST_MCRXR_MASK		0x7c0007fe
+
+#define INST_STRING		0x7c00042a
+#define INST_STRING_MASK	0x7c0007fe
+#define INST_STRING_GEN_MASK	0x7c00067e
+#define INST_LSWI		0x7c0004aa
+#define INST_LSWX		0x7c00042a
+#define INST_STSWI		0x7c0005aa
+#define INST_STSWX		0x7c00052a
+
+static int emulate_string_inst(struct pt_regs *regs, u32 instword)
+{
+	u8 rT = (instword >> 21) & 0x1f;
+	u8 rA = (instword >> 16) & 0x1f;
+	u8 NB_RB = (instword >> 11) & 0x1f;
+	u32 num_bytes;
+	unsigned long EA;
+	int pos = 0;
+
+	/* Early out if we are an invalid form of lswx */
+	if ((instword & INST_STRING_MASK) == INST_LSWX)
+		if ((rT == rA) || (rT == NB_RB))
+			return -EINVAL;
+
+	EA = (rA == 0) ? 0 : regs->gpr[rA];
+
+	switch (instword & INST_STRING_MASK) {
+		case INST_LSWX:
+		case INST_STSWX:
+			EA += NB_RB;
+			num_bytes = regs->xer & 0x7f;
+			break;
+		case INST_LSWI:
+		case INST_STSWI:
+			num_bytes = (NB_RB == 0) ? 32 : NB_RB;
+			break;
+		default:
+			return -EINVAL;
+	}
+
+	while (num_bytes != 0)
+	{
+		u8 val;
+		u32 shift = 8 * (3 - (pos & 0x3));
+
+		switch ((instword & INST_STRING_MASK)) {
+			case INST_LSWX:
+			case INST_LSWI:
+				if (get_user(val, (u8 __user *)EA))
+					return -EFAULT;
+				/* first time updating this reg,
+				 * zero it out */
+				if (pos == 0)
+					regs->gpr[rT] = 0;
+				regs->gpr[rT] |= val << shift;
+				break;
+			case INST_STSWI:
+			case INST_STSWX:
+				val = regs->gpr[rT] >> shift;
+				if (put_user(val, (u8 __user *)EA))
+					return -EFAULT;
+				break;
+		}
+		/* move EA to next address */
+		EA += 1;
+		num_bytes--;
+
+		/* manage our position within the register */
+		if (++pos == 4) {
+			pos = 0;
+			if (++rT == 32)
+				rT = 0;
+		}
+	}
+
+	return 0;
+}
+
+static int emulate_instruction(struct pt_regs *regs)
+{
+	u32 instword;
+	u32 rd;
+
+	if (!user_mode(regs))
+		return -EINVAL;
+	CHECK_FULL_REGS(regs);
+
+	if (get_user(instword, (u32 __user *)(regs->nip)))
+		return -EFAULT;
+
+	/* Emulate the mfspr rD, PVR. */
+	if ((instword & INST_MFSPR_PVR_MASK) == INST_MFSPR_PVR) {
+		rd = (instword >> 21) & 0x1f;
+		regs->gpr[rd] = mfspr(SPRN_PVR);
+		return 0;
+	}
+
+	/* Emulating the dcba insn is just a no-op.  */
+	if ((instword & INST_DCBA_MASK) == INST_DCBA)
+		return 0;
+
+	/* Emulate the mcrxr insn.  */
+	if ((instword & INST_MCRXR_MASK) == INST_MCRXR) {
+		int shift = (instword >> 21) & 0x1c;
+		unsigned long msk = 0xf0000000UL >> shift;
+
+		regs->ccr = (regs->ccr & ~msk) | ((regs->xer >> shift) & msk);
+		regs->xer &= ~0xf0000000UL;
+		return 0;
+	}
+
+	/* Emulate load/store string insn. */
+	if ((instword & INST_STRING_GEN_MASK) == INST_STRING)
+		return emulate_string_inst(regs, instword);
+
+	return -EINVAL;
+}
+
+/*
+ * Look through the list of trap instructions that are used for BUG(),
+ * BUG_ON() and WARN_ON() and see if we hit one.  At this point we know
+ * that the exception was caused by a trap instruction of some kind.
+ * Returns 1 if we should continue (i.e. it was a WARN_ON) or 0
+ * otherwise.
+ */
+extern struct bug_entry __start___bug_table[], __stop___bug_table[];
+
+#ifndef CONFIG_MODULES
+#define module_find_bug(x)	NULL
+#endif
+
+struct bug_entry *find_bug(unsigned long bugaddr)
+{
+	struct bug_entry *bug;
+
+	for (bug = __start___bug_table; bug < __stop___bug_table; ++bug)
+		if (bugaddr == bug->bug_addr)
+			return bug;
+	return module_find_bug(bugaddr);
+}
+
+static int check_bug_trap(struct pt_regs *regs)
+{
+	struct bug_entry *bug;
+	unsigned long addr;
+
+	if (regs->msr & MSR_PR)
+		return 0;	/* not in kernel */
+	addr = regs->nip;	/* address of trap instruction */
+	if (addr < PAGE_OFFSET)
+		return 0;
+	bug = find_bug(regs->nip);
+	if (bug == NULL)
+		return 0;
+	if (bug->line & BUG_WARNING_TRAP) {
+		/* this is a WARN_ON rather than BUG/BUG_ON */
+		printk(KERN_ERR "Badness in %s at %s:%ld\n",
+		       bug->function, bug->file,
+		       bug->line & ~BUG_WARNING_TRAP);
+		dump_stack();
+		return 1;
+	}
+	printk(KERN_CRIT "kernel BUG in %s at %s:%ld!\n",
+	       bug->function, bug->file, bug->line);
+
+	return 0;
+}
+
+void __kprobes program_check_exception(struct pt_regs *regs)
+{
+	unsigned int reason = get_reason(regs);
+	extern int do_mathemu(struct pt_regs *regs);
+
+#ifdef CONFIG_MATH_EMULATION
+	/* (reason & REASON_ILLEGAL) would be the obvious thing here,
+	 * but there seems to be a hardware bug on the 405GP (RevD)
+	 * that means ESR is sometimes set incorrectly - either to
+	 * ESR_DST (!?) or 0.  In the process of chasing this with the
+	 * hardware people - not sure if it can happen on any illegal
+	 * instruction or only on FP instructions, whether there is a
+	 * pattern to occurences etc. -dgibson 31/Mar/2003 */
+	if (!(reason & REASON_TRAP) && do_mathemu(regs) == 0) {
+		emulate_single_step(regs);
+		return;
+	}
+#endif /* CONFIG_MATH_EMULATION */
+
+	if (reason & REASON_FP) {
+		/* IEEE FP exception */
+		parse_fpe(regs);
+		return;
+	}
+	if (reason & REASON_TRAP) {
+		/* trap exception */
+		if (notify_die(DIE_BPT, "breakpoint", regs, 5, 5, SIGTRAP)
+				== NOTIFY_STOP)
+			return;
+		if (debugger_bpt(regs))
+			return;
+		if (check_bug_trap(regs)) {
+			regs->nip += 4;
+			return;
+		}
+		_exception(SIGTRAP, regs, TRAP_BRKPT, regs->nip);
+		return;
+	}
+
+	/* Try to emulate it if we should. */
+	if (reason & (REASON_ILLEGAL | REASON_PRIVILEGED)) {
+		switch (emulate_instruction(regs)) {
+		case 0:
+			regs->nip += 4;
+			emulate_single_step(regs);
+			return;
+		case -EFAULT:
+			_exception(SIGSEGV, regs, SEGV_MAPERR, regs->nip);
+			return;
+		}
+	}
+
+	if (reason & REASON_PRIVILEGED)
+		_exception(SIGILL, regs, ILL_PRVOPC, regs->nip);
+	else
+		_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
+}
+
+void alignment_exception(struct pt_regs *regs)
+{
+	int fixed;
+
+	fixed = fix_alignment(regs);
+
+	if (fixed == 1) {
+		regs->nip += 4;	/* skip over emulated instruction */
+		emulate_single_step(regs);
+		return;
+	}
+
+	/* Operand address was bad */
+	if (fixed == -EFAULT) {
+		if (user_mode(regs))
+			_exception(SIGSEGV, regs, SEGV_ACCERR, regs->dar);
+		else
+			/* Search exception table */
+			bad_page_fault(regs, regs->dar, SIGSEGV);
+		return;
+	}
+	_exception(SIGBUS, regs, BUS_ADRALN, regs->dar);
+}
+
+void StackOverflow(struct pt_regs *regs)
+{
+	printk(KERN_CRIT "Kernel stack overflow in process %p, r1=%lx\n",
+	       current, regs->gpr[1]);
+	debugger(regs);
+	show_regs(regs);
+	panic("kernel stack overflow");
+}
+
+void nonrecoverable_exception(struct pt_regs *regs)
+{
+	printk(KERN_ERR "Non-recoverable exception at PC=%lx MSR=%lx\n",
+	       regs->nip, regs->msr);
+	debugger(regs);
+	die("nonrecoverable exception", regs, SIGKILL);
+}
+
+void trace_syscall(struct pt_regs *regs)
+{
+	printk("Task: %p(%d), PC: %08lX/%08lX, Syscall: %3ld, Result: %s%ld    %s\n",
+	       current, current->pid, regs->nip, regs->link, regs->gpr[0],
+	       regs->ccr&0x10000000?"Error=":"", regs->gpr[3], print_tainted());
+}
+
+void kernel_fp_unavailable_exception(struct pt_regs *regs)
+{
+	printk(KERN_EMERG "Unrecoverable FP Unavailable Exception "
+			  "%lx at %lx\n", regs->trap, regs->nip);
+	die("Unrecoverable FP Unavailable Exception", regs, SIGABRT);
+}
+
+void altivec_unavailable_exception(struct pt_regs *regs)
+{
+#if !defined(CONFIG_ALTIVEC)
+	if (user_mode(regs)) {
+		/* A user program has executed an altivec instruction,
+		   but this kernel doesn't support altivec. */
+		_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
+		return;
+	}
+#endif
+	printk(KERN_EMERG "Unrecoverable VMX/Altivec Unavailable Exception "
+			"%lx at %lx\n", regs->trap, regs->nip);
+	die("Unrecoverable VMX/Altivec Unavailable Exception", regs, SIGABRT);
+}
+
+#if defined(CONFIG_PPC64) || defined(CONFIG_E500)
+void performance_monitor_exception(struct pt_regs *regs)
+{
+	perf_irq(regs);
+}
+#endif
+
+#ifdef CONFIG_8xx
+void SoftwareEmulation(struct pt_regs *regs)
+{
+	extern int do_mathemu(struct pt_regs *);
+	extern int Soft_emulate_8xx(struct pt_regs *);
+	int errcode;
+
+	CHECK_FULL_REGS(regs);
+
+	if (!user_mode(regs)) {
+		debugger(regs);
+		die("Kernel Mode Software FPU Emulation", regs, SIGFPE);
+	}
+
+#ifdef CONFIG_MATH_EMULATION
+	errcode = do_mathemu(regs);
+#else
+	errcode = Soft_emulate_8xx(regs);
+#endif
+	if (errcode) {
+		if (errcode > 0)
+			_exception(SIGFPE, regs, 0, 0);
+		else if (errcode == -EFAULT)
+			_exception(SIGSEGV, regs, 0, 0);
+		else
+			_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
+	} else
+		emulate_single_step(regs);
+}
+#endif /* CONFIG_8xx */
+
+#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+
+void DebugException(struct pt_regs *regs, unsigned long debug_status)
+{
+	if (debug_status & DBSR_IC) {	/* instruction completion */
+		regs->msr &= ~MSR_DE;
+		if (user_mode(regs)) {
+			current->thread.dbcr0 &= ~DBCR0_IC;
+		} else {
+			/* Disable instruction completion */
+			mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~DBCR0_IC);
+			/* Clear the instruction completion event */
+			mtspr(SPRN_DBSR, DBSR_IC);
+			if (debugger_sstep(regs))
+				return;
+		}
+		_exception(SIGTRAP, regs, TRAP_TRACE, 0);
+	}
+}
+#endif /* CONFIG_4xx || CONFIG_BOOKE */
+
+#if !defined(CONFIG_TAU_INT)
+void TAUException(struct pt_regs *regs)
+{
+	printk("TAU trap at PC: %lx, MSR: %lx, vector=%lx    %s\n",
+	       regs->nip, regs->msr, regs->trap, print_tainted());
+}
+#endif /* CONFIG_INT_TAU */
+
+#ifdef CONFIG_ALTIVEC
+void altivec_assist_exception(struct pt_regs *regs)
+{
+	int err;
+
+	if (!user_mode(regs)) {
+		printk(KERN_EMERG "VMX/Altivec assist exception in kernel mode"
+		       " at %lx\n", regs->nip);
+		die("Kernel VMX/Altivec assist exception", regs, SIGILL);
+	}
+
+	flush_altivec_to_thread(current);
+
+	err = emulate_altivec(regs);
+	if (err == 0) {
+		regs->nip += 4;		/* skip emulated instruction */
+		emulate_single_step(regs);
+		return;
+	}
+
+	if (err == -EFAULT) {
+		/* got an error reading the instruction */
+		_exception(SIGSEGV, regs, SEGV_ACCERR, regs->nip);
+	} else {
+		/* didn't recognize the instruction */
+		/* XXX quick hack for now: set the non-Java bit in the VSCR */
+		if (printk_ratelimit())
+			printk(KERN_ERR "Unrecognized altivec instruction "
+			       "in %s at %lx\n", current->comm, regs->nip);
+		current->thread.vscr.u[3] |= 0x10000;
+	}
+}
+#endif /* CONFIG_ALTIVEC */
+
+#ifdef CONFIG_FSL_BOOKE
+void CacheLockingException(struct pt_regs *regs, unsigned long address,
+			   unsigned long error_code)
+{
+	/* We treat cache locking instructions from the user
+	 * as priv ops, in the future we could try to do
+	 * something smarter
+	 */
+	if (error_code & (ESR_DLK|ESR_ILK))
+		_exception(SIGILL, regs, ILL_PRVOPC, regs->nip);
+	return;
+}
+#endif /* CONFIG_FSL_BOOKE */
+
+#ifdef CONFIG_SPE
+void SPEFloatingPointException(struct pt_regs *regs)
+{
+	unsigned long spefscr;
+	int fpexc_mode;
+	int code = 0;
+
+	spefscr = current->thread.spefscr;
+	fpexc_mode = current->thread.fpexc_mode;
+
+	/* Hardware does not neccessarily set sticky
+	 * underflow/overflow/invalid flags */
+	if ((spefscr & SPEFSCR_FOVF) && (fpexc_mode & PR_FP_EXC_OVF)) {
+		code = FPE_FLTOVF;
+		spefscr |= SPEFSCR_FOVFS;
+	}
+	else if ((spefscr & SPEFSCR_FUNF) && (fpexc_mode & PR_FP_EXC_UND)) {
+		code = FPE_FLTUND;
+		spefscr |= SPEFSCR_FUNFS;
+	}
+	else if ((spefscr & SPEFSCR_FDBZ) && (fpexc_mode & PR_FP_EXC_DIV))
+		code = FPE_FLTDIV;
+	else if ((spefscr & SPEFSCR_FINV) && (fpexc_mode & PR_FP_EXC_INV)) {
+		code = FPE_FLTINV;
+		spefscr |= SPEFSCR_FINVS;
+	}
+	else if ((spefscr & (SPEFSCR_FG | SPEFSCR_FX)) && (fpexc_mode & PR_FP_EXC_RES))
+		code = FPE_FLTRES;
+
+	current->thread.spefscr = spefscr;
+
+	_exception(SIGFPE, regs, code, regs->nip);
+	return;
+}
+#endif
+
+/*
+ * We enter here if we get an unrecoverable exception, that is, one
+ * that happened at a point where the RI (recoverable interrupt) bit
+ * in the MSR is 0.  This indicates that SRR0/1 are live, and that
+ * we therefore lost state by taking this exception.
+ */
+void unrecoverable_exception(struct pt_regs *regs)
+{
+	printk(KERN_EMERG "Unrecoverable exception %lx at %lx\n",
+	       regs->trap, regs->nip);
+	die("Unrecoverable exception", regs, SIGABRT);
+}
+
+#ifdef CONFIG_BOOKE_WDT
+/*
+ * Default handler for a Watchdog exception,
+ * spins until a reboot occurs
+ */
+void __attribute__ ((weak)) WatchdogHandler(struct pt_regs *regs)
+{
+	/* Generic WatchdogHandler, implement your own */
+	mtspr(SPRN_TCR, mfspr(SPRN_TCR)&(~TCR_WIE));
+	return;
+}
+
+void WatchdogException(struct pt_regs *regs)
+{
+	printk (KERN_EMERG "PowerPC Book-E Watchdog Exception\n");
+	WatchdogHandler(regs);
+}
+#endif
+
+/*
+ * We enter here if we discover during exception entry that we are
+ * running in supervisor mode with a userspace value in the stack pointer.
+ */
+void kernel_bad_stack(struct pt_regs *regs)
+{
+	printk(KERN_EMERG "Bad kernel stack pointer %lx at %lx\n",
+	       regs->gpr[1], regs->nip);
+	die("Bad kernel stack pointer", regs, SIGABRT);
+}
+
+void __init trap_init(void)
+{
+}
diff --git a/arch/ppc64/kernel/udbg.c b/arch/powerpc/kernel/udbg.c
index d49c3613c8ec..0d878e72fc44 100644
--- a/arch/ppc64/kernel/udbg.c
+++ b/arch/powerpc/kernel/udbg.c
@@ -10,12 +10,10 @@
  */
 
 #include <stdarg.h>
-#define WANT_PPCDBG_TAB /* Only defined here */
 #include <linux/config.h>
 #include <linux/types.h>
 #include <linux/sched.h>
 #include <linux/console.h>
-#include <asm/ppcdebug.h>
 #include <asm/processor.h>
 
 void (*udbg_putc)(unsigned char c);
@@ -89,59 +87,6 @@ void udbg_printf(const char *fmt, ...)
 	va_end(args);
 }
 
-/* PPCDBG stuff */
-
-u64 ppc64_debug_switch;
-
-/* Special print used by PPCDBG() macro */
-void udbg_ppcdbg(unsigned long debug_flags, const char *fmt, ...)
-{
-	unsigned long active_debugs = debug_flags & ppc64_debug_switch;
-
-	if (active_debugs) {
-		va_list ap;
-		unsigned char buf[UDBG_BUFSIZE];
-		unsigned long i, len = 0;
-
-		for (i=0; i < PPCDBG_NUM_FLAGS; i++) {
-			if (((1U << i) & active_debugs) && 
-			    trace_names[i]) {
-				len += strlen(trace_names[i]); 
-				udbg_puts(trace_names[i]);
-				break;
-			}
-		}
-
-		snprintf(buf, UDBG_BUFSIZE, " [%s]: ", current->comm);
-		len += strlen(buf); 
-		udbg_puts(buf);
-
-		while (len < 18) {
-			udbg_puts(" ");
-			len++;
-		}
-
-		va_start(ap, fmt);
-		vsnprintf(buf, UDBG_BUFSIZE, fmt, ap);
-		udbg_puts(buf);
-		va_end(ap);
-	}
-}
-
-unsigned long udbg_ifdebug(unsigned long flags)
-{
-	return (flags & ppc64_debug_switch);
-}
-
-/*
- * Initialize the PPCDBG state.  Called before relocation has been enabled.
- */
-void __init ppcdbg_initialize(void)
-{
-	ppc64_debug_switch = PPC_DEBUG_DEFAULT; /* | PPCDBG_BUSWALK | */
-	/* PPCDBG_PHBINIT | PPCDBG_MM | PPCDBG_MMINIT | PPCDBG_TCEINIT | PPCDBG_TCE */;
-}
-
 /*
  * Early boot console based on udbg
  */
diff --git a/arch/ppc64/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c
index 9313574ab935..9313574ab935 100644
--- a/arch/ppc64/kernel/udbg_16550.c
+++ b/arch/powerpc/kernel/udbg_16550.c
diff --git a/arch/ppc64/kernel/udbg_scc.c b/arch/powerpc/kernel/udbg_scc.c
index c47fd6c63531..820c53551507 100644
--- a/arch/ppc64/kernel/udbg_scc.c
+++ b/arch/powerpc/kernel/udbg_scc.c
@@ -12,7 +12,6 @@
 #include <linux/types.h>
 #include <asm/udbg.h>
 #include <asm/processor.h>
-#include <asm/naca.h>
 #include <asm/io.h>
 #include <asm/prom.h>
 #include <asm/pmac_feature.h>
diff --git a/arch/ppc64/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index efa985f05aca..f0c47dab0903 100644
--- a/arch/ppc64/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -31,10 +31,12 @@
 #include <asm/processor.h>
 #include <asm/mmu.h>
 #include <asm/mmu_context.h>
+#include <asm/lmb.h>
 #include <asm/machdep.h>
 #include <asm/cputable.h>
 #include <asm/sections.h>
 #include <asm/vdso.h>
+#include <asm/vdso_datapage.h>
 
 #undef DEBUG
 
@@ -44,45 +46,54 @@
 #define DBG(fmt...)
 #endif
 
+/* Max supported size for symbol names */
+#define MAX_SYMNAME	64
 
-/*
- * The vDSOs themselves are here
- */
-extern char vdso64_start, vdso64_end;
 extern char vdso32_start, vdso32_end;
-
-static void *vdso64_kbase = &vdso64_start;
 static void *vdso32_kbase = &vdso32_start;
-
-unsigned int vdso64_pages;
 unsigned int vdso32_pages;
-
-/* Signal trampolines user addresses */
-
-unsigned long vdso64_rt_sigtramp;
 unsigned long vdso32_sigtramp;
 unsigned long vdso32_rt_sigtramp;
 
+#ifdef CONFIG_PPC64
+extern char vdso64_start, vdso64_end;
+static void *vdso64_kbase = &vdso64_start;
+unsigned int vdso64_pages;
+unsigned long vdso64_rt_sigtramp;
+#endif /* CONFIG_PPC64 */
+
+/*
+ * The vdso data page (aka. systemcfg for old ppc64 fans) is here.
+ * Once the early boot kernel code no longer needs to muck around
+ * with it, it will become dynamically allocated
+ */
+static union {
+	struct vdso_data	data;
+	u8			page[PAGE_SIZE];
+} vdso_data_store __attribute__((__section__(".data.page_aligned")));
+struct vdso_data *vdso_data = &vdso_data_store.data;
+
 /* Format of the patch table */
 struct vdso_patch_def
 {
-	u32		pvr_mask, pvr_value;
+	unsigned long	ftr_mask, ftr_value;
 	const char	*gen_name;
 	const char	*fix_name;
 };
 
 /* Table of functions to patch based on the CPU type/revision
  *
- * TODO: Improve by adding whole lists for each entry
+ * Currently, we only change sync_dicache to do nothing on processors
+ * with a coherent icache
  */
 static struct vdso_patch_def vdso_patches[] = {
 	{
-		0xffff0000, 0x003a0000,		/* POWER5 */
+		CPU_FTR_COHERENT_ICACHE, CPU_FTR_COHERENT_ICACHE,
 		"__kernel_sync_dicache", "__kernel_sync_dicache_p5"
 	},
 	{
-		0xffff0000, 0x003b0000,		/* POWER5 */
-		"__kernel_sync_dicache", "__kernel_sync_dicache_p5"
+		CPU_FTR_USE_TB, 0,
+		"__kernel_gettimeofday", NULL
 	},
 };
 
@@ -116,7 +127,8 @@ static void dump_one_vdso_page(struct page *pg, struct page *upg)
 	       page_count(pg),
 	       pg->flags);
 	if (upg/* && pg != upg*/) {
-		printk(" upg: %p (c:%d,f:%08lx)", __va(page_to_pfn(upg) << PAGE_SHIFT),
+		printk(" upg: %p (c:%d,f:%08lx)", __va(page_to_pfn(upg)
+						       << PAGE_SHIFT),
 		       page_count(upg),
 		       upg->flags);
 	}
@@ -130,9 +142,10 @@ static void dump_vdso_pages(struct vm_area_struct * vma)
 	if (!vma || test_thread_flag(TIF_32BIT)) {
 		printk("vDSO32 @ %016lx:\n", (unsigned long)vdso32_kbase);
 		for (i=0; i<vdso32_pages; i++) {
-			struct page *pg = virt_to_page(vdso32_kbase + i*PAGE_SIZE);
+			struct page *pg = virt_to_page(vdso32_kbase +
+						       i*PAGE_SIZE);
 			struct page *upg = (vma && vma->vm_mm) ?
-				follow_page(vma->vm_mm, vma->vm_start + i*PAGE_SIZE, 0)
+				follow_page(vma, vma->vm_start + i*PAGE_SIZE, 0)
 				: NULL;
 			dump_one_vdso_page(pg, upg);
 		}
@@ -140,9 +153,10 @@ static void dump_vdso_pages(struct vm_area_struct * vma)
 	if (!vma || !test_thread_flag(TIF_32BIT)) {
 		printk("vDSO64 @ %016lx:\n", (unsigned long)vdso64_kbase);
 		for (i=0; i<vdso64_pages; i++) {
-			struct page *pg = virt_to_page(vdso64_kbase + i*PAGE_SIZE);
+			struct page *pg = virt_to_page(vdso64_kbase +
+						       i*PAGE_SIZE);
 			struct page *upg = (vma && vma->vm_mm) ?
-				follow_page(vma->vm_mm, vma->vm_start + i*PAGE_SIZE, 0)
+				follow_page(vma, vma->vm_start + i*PAGE_SIZE, 0)
 				: NULL;
 			dump_one_vdso_page(pg, upg);
 		}
@@ -167,7 +181,12 @@ static struct page * vdso_vma_nopage(struct vm_area_struct * vma,
 {
 	unsigned long offset = address - vma->vm_start;
 	struct page *pg;
-	void *vbase = test_thread_flag(TIF_32BIT) ? vdso32_kbase : vdso64_kbase;
+#ifdef CONFIG_PPC64
+	void *vbase = test_thread_flag(TIF_32BIT) ?
+		vdso32_kbase : vdso64_kbase;
+#else
+	void *vbase = vdso32_kbase;
+#endif
 
 	DBG("vdso_vma_nopage(current: %s, address: %016lx, off: %lx)\n",
 	    current->comm, address, offset);
@@ -176,13 +195,13 @@ static struct page * vdso_vma_nopage(struct vm_area_struct * vma,
 		return NOPAGE_SIGBUS;
 
 	/*
-	 * Last page is systemcfg, special handling here, no get_page() a
-	 * this is a reserved page
+	 * Last page is systemcfg.
 	 */
 	if ((vma->vm_end - address) <= PAGE_SIZE)
-		return virt_to_page(systemcfg);
+		pg = virt_to_page(vdso_data);
+	else
+		pg = virt_to_page(vbase + offset);
 
-	pg = virt_to_page(vbase + offset);
 	get_page(pg);
 	DBG(" ->page count: %d\n", page_count(pg));
 
@@ -198,13 +217,15 @@ static struct vm_operations_struct vdso_vmops = {
  * This is called from binfmt_elf, we create the special vma for the
  * vDSO and insert it into the mm struct tree
  */
-int arch_setup_additional_pages(struct linux_binprm *bprm, int executable_stack)
+int arch_setup_additional_pages(struct linux_binprm *bprm,
+				int executable_stack)
 {
 	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma;
 	unsigned long vdso_pages;
 	unsigned long vdso_base;
 
+#ifdef CONFIG_PPC64
 	if (test_thread_flag(TIF_32BIT)) {
 		vdso_pages = vdso32_pages;
 		vdso_base = VDSO32_MBASE;
@@ -212,6 +233,10 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int executable_stack)
 		vdso_pages = vdso64_pages;
 		vdso_base = VDSO64_MBASE;
 	}
+#else
+	vdso_pages = vdso32_pages;
+	vdso_base = VDSO32_MBASE;
+#endif
 
 	current->thread.vdso_base = 0;
 
@@ -227,6 +252,9 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int executable_stack)
 
 	memset(vma, 0, sizeof(*vma));
 
+	/* Add a page to the vdso size for the data page */
+	vdso_pages ++;
+
 	/*
 	 * pick a base address for the vDSO in process space. We try to put it
 	 * at vdso_base which is the "natural" base for it, but we might fail
@@ -243,21 +271,17 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int executable_stack)
 
 	vma->vm_mm = mm;
 	vma->vm_start = current->thread.vdso_base;
+	vma->vm_end = vma->vm_start + (vdso_pages << PAGE_SHIFT);
 
 	/*
-	 * the VMA size is one page more than the vDSO since systemcfg
-	 * is mapped in the last one
-	 */
-	vma->vm_end = vma->vm_start + ((vdso_pages + 1) << PAGE_SHIFT);
-
-	/*
-	 * our vma flags don't have VM_WRITE so by default, the process isn't allowed
-	 * to write those pages.
-	 * gdb can break that with ptrace interface, and thus trigger COW on those
-	 * pages but it's then your responsibility to never do that on the "data" page
-	 * of the vDSO or you'll stop getting kernel updates and your nice userland
-	 * gettimeofday will be totally dead. It's fine to use that for setting
-	 * breakpoints in the vDSO code pages though
+	 * our vma flags don't have VM_WRITE so by default, the process isn't
+	 * allowed to write those pages.
+	 * gdb can break that with ptrace interface, and thus trigger COW on
+	 * those pages but it's then your responsibility to never do that on
+	 * the "data" page of the vDSO or you'll stop getting kernel updates
+	 * and your nice userland gettimeofday will be totally dead.
+	 * It's fine to use that for setting breakpoints in the vDSO code
+	 * pages though
 	 */
 	vma->vm_flags = VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC;
 	vma->vm_flags |= mm->def_flags;
@@ -299,6 +323,74 @@ static void * __init find_section32(Elf32_Ehdr *ehdr, const char *secname,
 	return NULL;
 }
 
+static Elf32_Sym * __init find_symbol32(struct lib32_elfinfo *lib,
+					const char *symname)
+{
+	unsigned int i;
+	char name[MAX_SYMNAME], *c;
+
+	for (i = 0; i < (lib->dynsymsize / sizeof(Elf32_Sym)); i++) {
+		if (lib->dynsym[i].st_name == 0)
+			continue;
+		strlcpy(name, lib->dynstr + lib->dynsym[i].st_name,
+			MAX_SYMNAME);
+		c = strchr(name, '@');
+		if (c)
+			*c = 0;
+		if (strcmp(symname, name) == 0)
+			return &lib->dynsym[i];
+	}
+	return NULL;
+}
+
+/* Note that we assume the section is .text and the symbol is relative to
+ * the library base
+ */
+static unsigned long __init find_function32(struct lib32_elfinfo *lib,
+					    const char *symname)
+{
+	Elf32_Sym *sym = find_symbol32(lib, symname);
+
+	if (sym == NULL) {
+		printk(KERN_WARNING "vDSO32: function %s not found !\n",
+		       symname);
+		return 0;
+	}
+	return sym->st_value - VDSO32_LBASE;
+}
+
+static int vdso_do_func_patch32(struct lib32_elfinfo *v32,
+				struct lib64_elfinfo *v64,
+				const char *orig, const char *fix)
+{
+	Elf32_Sym *sym32_gen, *sym32_fix;
+
+	sym32_gen = find_symbol32(v32, orig);
+	if (sym32_gen == NULL) {
+		printk(KERN_ERR "vDSO32: Can't find symbol %s !\n", orig);
+		return -1;
+	}
+	if (fix == NULL) {
+		sym32_gen->st_name = 0;
+		return 0;
+	}
+	sym32_fix = find_symbol32(v32, fix);
+	if (sym32_fix == NULL) {
+		printk(KERN_ERR "vDSO32: Can't find symbol %s !\n", fix);
+		return -1;
+	}
+	sym32_gen->st_value = sym32_fix->st_value;
+	sym32_gen->st_size = sym32_fix->st_size;
+	sym32_gen->st_info = sym32_fix->st_info;
+	sym32_gen->st_other = sym32_fix->st_other;
+	sym32_gen->st_shndx = sym32_fix->st_shndx;
+
+	return 0;
+}
+
+
+#ifdef CONFIG_PPC64
+
 static void * __init find_section64(Elf64_Ehdr *ehdr, const char *secname,
 				  unsigned long *size)
 {
@@ -323,33 +415,17 @@ static void * __init find_section64(Elf64_Ehdr *ehdr, const char *secname,
 	return NULL;
 }
 
-static Elf32_Sym * __init find_symbol32(struct lib32_elfinfo *lib, const char *symname)
+static Elf64_Sym * __init find_symbol64(struct lib64_elfinfo *lib,
+					const char *symname)
 {
 	unsigned int i;
-	char name[32], *c;
-
-	for (i = 0; i < (lib->dynsymsize / sizeof(Elf32_Sym)); i++) {
-		if (lib->dynsym[i].st_name == 0)
-			continue;
-		strlcpy(name, lib->dynstr + lib->dynsym[i].st_name, 32);
-		c = strchr(name, '@');
-		if (c)
-			*c = 0;
-		if (strcmp(symname, name) == 0)
-			return &lib->dynsym[i];
-	}
-	return NULL;
-}
-
-static Elf64_Sym * __init find_symbol64(struct lib64_elfinfo *lib, const char *symname)
-{
-	unsigned int i;
-	char name[32], *c;
+	char name[MAX_SYMNAME], *c;
 
 	for (i = 0; i < (lib->dynsymsize / sizeof(Elf64_Sym)); i++) {
 		if (lib->dynsym[i].st_name == 0)
 			continue;
-		strlcpy(name, lib->dynstr + lib->dynsym[i].st_name, 32);
+		strlcpy(name, lib->dynstr + lib->dynsym[i].st_name,
+			MAX_SYMNAME);
 		c = strchr(name, '@');
 		if (c)
 			*c = 0;
@@ -362,35 +438,55 @@ static Elf64_Sym * __init find_symbol64(struct lib64_elfinfo *lib, const char *s
 /* Note that we assume the section is .text and the symbol is relative to
  * the library base
  */
-static unsigned long __init find_function32(struct lib32_elfinfo *lib, const char *symname)
+static unsigned long __init find_function64(struct lib64_elfinfo *lib,
+					    const char *symname)
 {
-	Elf32_Sym *sym = find_symbol32(lib, symname);
+	Elf64_Sym *sym = find_symbol64(lib, symname);
 
 	if (sym == NULL) {
-		printk(KERN_WARNING "vDSO32: function %s not found !\n", symname);
+		printk(KERN_WARNING "vDSO64: function %s not found !\n",
+		       symname);
 		return 0;
 	}
-	return sym->st_value - VDSO32_LBASE;
+#ifdef VDS64_HAS_DESCRIPTORS
+	return *((u64 *)(vdso64_kbase + sym->st_value - VDSO64_LBASE)) -
+		VDSO64_LBASE;
+#else
+	return sym->st_value - VDSO64_LBASE;
+#endif
 }
 
-/* Note that we assume the section is .text and the symbol is relative to
- * the library base
- */
-static unsigned long __init find_function64(struct lib64_elfinfo *lib, const char *symname)
+static int vdso_do_func_patch64(struct lib32_elfinfo *v32,
+				struct lib64_elfinfo *v64,
+				const char *orig, const char *fix)
 {
-	Elf64_Sym *sym = find_symbol64(lib, symname);
+	Elf64_Sym *sym64_gen, *sym64_fix;
 
-	if (sym == NULL) {
-		printk(KERN_WARNING "vDSO64: function %s not found !\n", symname);
+	sym64_gen = find_symbol64(v64, orig);
+	if (sym64_gen == NULL) {
+		printk(KERN_ERR "vDSO64: Can't find symbol %s !\n", orig);
+		return -1;
+	}
+	if (fix == NULL) {
+		sym64_gen->st_name = 0;
 		return 0;
 	}
-#ifdef VDS64_HAS_DESCRIPTORS
-	return *((u64 *)(vdso64_kbase + sym->st_value - VDSO64_LBASE)) - VDSO64_LBASE;
-#else
-	return sym->st_value - VDSO64_LBASE;
-#endif
+	sym64_fix = find_symbol64(v64, fix);
+	if (sym64_fix == NULL) {
+		printk(KERN_ERR "vDSO64: Can't find symbol %s !\n", fix);
+		return -1;
+	}
+	sym64_gen->st_value = sym64_fix->st_value;
+	sym64_gen->st_size = sym64_fix->st_size;
+	sym64_gen->st_info = sym64_fix->st_info;
+	sym64_gen->st_other = sym64_fix->st_other;
+	sym64_gen->st_shndx = sym64_fix->st_shndx;
+
+	return 0;
 }
 
+#endif /* CONFIG_PPC64 */
+
 
 static __init int vdso_do_find_sections(struct lib32_elfinfo *v32,
 					struct lib64_elfinfo *v64)
@@ -404,7 +500,7 @@ static __init int vdso_do_find_sections(struct lib32_elfinfo *v32,
 	v32->dynsym = find_section32(v32->hdr, ".dynsym", &v32->dynsymsize);
 	v32->dynstr = find_section32(v32->hdr, ".dynstr", NULL);
 	if (v32->dynsym == NULL || v32->dynstr == NULL) {
-		printk(KERN_ERR "vDSO32: a required symbol section was not found\n");
+		printk(KERN_ERR "vDSO32: required symbol section not found\n");
 		return -1;
 	}
 	sect = find_section32(v32->hdr, ".text", NULL);
@@ -414,10 +510,11 @@ static __init int vdso_do_find_sections(struct lib32_elfinfo *v32,
 	}
 	v32->text = sect - vdso32_kbase;
 
+#ifdef CONFIG_PPC64
 	v64->dynsym = find_section64(v64->hdr, ".dynsym", &v64->dynsymsize);
 	v64->dynstr = find_section64(v64->hdr, ".dynstr", NULL);
 	if (v64->dynsym == NULL || v64->dynstr == NULL) {
-		printk(KERN_ERR "vDSO64: a required symbol section was not found\n");
+		printk(KERN_ERR "vDSO64: required symbol section not found\n");
 		return -1;
 	}
 	sect = find_section64(v64->hdr, ".text", NULL);
@@ -426,6 +523,7 @@ static __init int vdso_do_find_sections(struct lib32_elfinfo *v32,
 		return -1;
 	}
 	v64->text = sect - vdso64_kbase;
+#endif /* CONFIG_PPC64 */
 
 	return 0;
 }
@@ -437,82 +535,40 @@ static __init void vdso_setup_trampolines(struct lib32_elfinfo *v32,
 	 * Find signal trampolines
 	 */
 
-	vdso64_rt_sigtramp	= find_function64(v64, "__kernel_sigtramp_rt64");
-	vdso32_sigtramp		= find_function32(v32, "__kernel_sigtramp32");
-	vdso32_rt_sigtramp	= find_function32(v32, "__kernel_sigtramp_rt32");
+#ifdef CONFIG_PPC64
+	vdso64_rt_sigtramp = find_function64(v64, "__kernel_sigtramp_rt64");
+#endif
+	vdso32_sigtramp	   = find_function32(v32, "__kernel_sigtramp32");
+	vdso32_rt_sigtramp = find_function32(v32, "__kernel_sigtramp_rt32");
 }
 
 static __init int vdso_fixup_datapage(struct lib32_elfinfo *v32,
 				       struct lib64_elfinfo *v64)
 {
 	Elf32_Sym *sym32;
+#ifdef CONFIG_PPC64
 	Elf64_Sym *sym64;
 
-	sym32 = find_symbol32(v32, "__kernel_datapage_offset");
-	if (sym32 == NULL) {
-		printk(KERN_ERR "vDSO32: Can't find symbol __kernel_datapage_offset !\n");
-		return -1;
-	}
-	*((int *)(vdso32_kbase + (sym32->st_value - VDSO32_LBASE))) =
-		(vdso32_pages << PAGE_SHIFT) - (sym32->st_value - VDSO32_LBASE);
-
        	sym64 = find_symbol64(v64, "__kernel_datapage_offset");
 	if (sym64 == NULL) {
-		printk(KERN_ERR "vDSO64: Can't find symbol __kernel_datapage_offset !\n");
+		printk(KERN_ERR "vDSO64: Can't find symbol "
+		       "__kernel_datapage_offset !\n");
 		return -1;
 	}
 	*((int *)(vdso64_kbase + sym64->st_value - VDSO64_LBASE)) =
-		(vdso64_pages << PAGE_SHIFT) - (sym64->st_value - VDSO64_LBASE);
-
-	return 0;
-}
-
-static int vdso_do_func_patch32(struct lib32_elfinfo *v32,
-				struct lib64_elfinfo *v64,
-				const char *orig, const char *fix)
-{
-	Elf32_Sym *sym32_gen, *sym32_fix;
-
-	sym32_gen = find_symbol32(v32, orig);
-	if (sym32_gen == NULL) {
-		printk(KERN_ERR "vDSO32: Can't find symbol %s !\n", orig);
-		return -1;
-	}
-	sym32_fix = find_symbol32(v32, fix);
-	if (sym32_fix == NULL) {
-		printk(KERN_ERR "vDSO32: Can't find symbol %s !\n", fix);
-		return -1;
-	}
-	sym32_gen->st_value = sym32_fix->st_value;
-	sym32_gen->st_size = sym32_fix->st_size;
-	sym32_gen->st_info = sym32_fix->st_info;
-	sym32_gen->st_other = sym32_fix->st_other;
-	sym32_gen->st_shndx = sym32_fix->st_shndx;
-
-	return 0;
-}
+		(vdso64_pages << PAGE_SHIFT) -
+		(sym64->st_value - VDSO64_LBASE);
+#endif /* CONFIG_PPC64 */
 
-static int vdso_do_func_patch64(struct lib32_elfinfo *v32,
-				struct lib64_elfinfo *v64,
-				const char *orig, const char *fix)
-{
-	Elf64_Sym *sym64_gen, *sym64_fix;
-
-	sym64_gen = find_symbol64(v64, orig);
-	if (sym64_gen == NULL) {
-		printk(KERN_ERR "vDSO64: Can't find symbol %s !\n", orig);
-		return -1;
-	}
-	sym64_fix = find_symbol64(v64, fix);
-	if (sym64_fix == NULL) {
-		printk(KERN_ERR "vDSO64: Can't find symbol %s !\n", fix);
+	sym32 = find_symbol32(v32, "__kernel_datapage_offset");
+	if (sym32 == NULL) {
+		printk(KERN_ERR "vDSO32: Can't find symbol "
+		       "__kernel_datapage_offset !\n");
 		return -1;
 	}
-	sym64_gen->st_value = sym64_fix->st_value;
-	sym64_gen->st_size = sym64_fix->st_size;
-	sym64_gen->st_info = sym64_fix->st_info;
-	sym64_gen->st_other = sym64_fix->st_other;
-	sym64_gen->st_shndx = sym64_fix->st_shndx;
+	*((int *)(vdso32_kbase + (sym32->st_value - VDSO32_LBASE))) =
+		(vdso32_pages << PAGE_SHIFT) -
+		(sym32->st_value - VDSO32_LBASE);
 
 	return 0;
 }
@@ -520,29 +576,30 @@ static int vdso_do_func_patch64(struct lib32_elfinfo *v32,
 static __init int vdso_fixup_alt_funcs(struct lib32_elfinfo *v32,
 				       struct lib64_elfinfo *v64)
 {
-	u32 pvr;
 	int i;
 
-	pvr = mfspr(SPRN_PVR);
 	for (i = 0; i < ARRAY_SIZE(vdso_patches); i++) {
 		struct vdso_patch_def *patch = &vdso_patches[i];
-		int match = (pvr & patch->pvr_mask) == patch->pvr_value;
-
-		DBG("patch %d (mask: %x, pvr: %x) : %s\n",
-		    i, patch->pvr_mask, patch->pvr_value, match ? "match" : "skip");
-
+		int match = (cur_cpu_spec->cpu_features & patch->ftr_mask)
+			== patch->ftr_value;
 		if (!match)
 			continue;
 
-		DBG("replacing %s with %s...\n", patch->gen_name, patch->fix_name);
+		DBG("replacing %s with %s...\n", patch->gen_name,
+		    patch->fix_name ? "NONE" : patch->fix_name);
 
 		/*
-		 * Patch the 32 bits and 64 bits symbols. Note that we do not patch
-		 * the "." symbol on 64 bits. It would be easy to do, but doesn't
-		 * seem to be necessary, patching the OPD symbol is enough.
+		 * Patch the 32 bits and 64 bits symbols. Note that we do not
+		 * patch the "." symbol on 64 bits.
+		 * It would be easy to do, but doesn't seem to be necessary,
+		 * patching the OPD symbol is enough.
 		 */
-		vdso_do_func_patch32(v32, v64, patch->gen_name, patch->fix_name);
-		vdso_do_func_patch64(v32, v64, patch->gen_name, patch->fix_name);
+		vdso_do_func_patch32(v32, v64, patch->gen_name,
+				     patch->fix_name);
+#ifdef CONFIG_PPC64
+		vdso_do_func_patch64(v32, v64, patch->gen_name,
+				     patch->fix_name);
+#endif /* CONFIG_PPC64 */
 	}
 
 	return 0;
@@ -555,8 +612,9 @@ static __init int vdso_setup(void)
 	struct lib64_elfinfo	v64;
 
 	v32.hdr = vdso32_kbase;
+#ifdef CONFIG_PPC64
 	v64.hdr = vdso64_kbase;
-
+#endif
 	if (vdso_do_find_sections(&v32, &v64))
 		return -1;
 
@@ -571,38 +629,101 @@ static __init int vdso_setup(void)
 	return 0;
 }
 
+/*
+ * Called from setup_arch to initialize the bitmap of available
+ * syscalls in the systemcfg page
+ */
+static void __init vdso_setup_syscall_map(void)
+{
+	unsigned int i;
+	extern unsigned long *sys_call_table;
+	extern unsigned long sys_ni_syscall;
+
+
+	for (i = 0; i < __NR_syscalls; i++) {
+#ifdef CONFIG_PPC64
+		if (sys_call_table[i*2] != sys_ni_syscall)
+			vdso_data->syscall_map_64[i >> 5] |=
+				0x80000000UL >> (i & 0x1f);
+		if (sys_call_table[i*2+1] != sys_ni_syscall)
+			vdso_data->syscall_map_32[i >> 5] |=
+				0x80000000UL >> (i & 0x1f);
+#else /* CONFIG_PPC64 */
+		if (sys_call_table[i] != sys_ni_syscall)
+			vdso_data->syscall_map_32[i >> 5] |=
+				0x80000000UL >> (i & 0x1f);
+#endif /* CONFIG_PPC64 */
+	}
+}
+
+
 void __init vdso_init(void)
 {
 	int i;
 
+#ifdef CONFIG_PPC64
+	/*
+	 * Fill up the "systemcfg" stuff for backward compatiblity
+	 */
+	strcpy(vdso_data->eye_catcher, "SYSTEMCFG:PPC64");
+	vdso_data->version.major = SYSTEMCFG_MAJOR;
+	vdso_data->version.minor = SYSTEMCFG_MINOR;
+	vdso_data->processor = mfspr(SPRN_PVR);
+	vdso_data->platform = _machine;
+	vdso_data->physicalMemorySize = lmb_phys_mem_size();
+	vdso_data->dcache_size = ppc64_caches.dsize;
+	vdso_data->dcache_line_size = ppc64_caches.dline_size;
+	vdso_data->icache_size = ppc64_caches.isize;
+	vdso_data->icache_line_size = ppc64_caches.iline_size;
+
+	/*
+	 * Calculate the size of the 64 bits vDSO
+	 */
 	vdso64_pages = (&vdso64_end - &vdso64_start) >> PAGE_SHIFT;
+	DBG("vdso64_kbase: %p, 0x%x pages\n", vdso64_kbase, vdso64_pages);
+#endif /* CONFIG_PPC64 */
+
+
+	/*
+	 * Calculate the size of the 32 bits vDSO
+	 */
 	vdso32_pages = (&vdso32_end - &vdso32_start) >> PAGE_SHIFT;
+	DBG("vdso32_kbase: %p, 0x%x pages\n", vdso32_kbase, vdso32_pages);
 
-	DBG("vdso64_kbase: %p, 0x%x pages, vdso32_kbase: %p, 0x%x pages\n",
-	       vdso64_kbase, vdso64_pages, vdso32_kbase, vdso32_pages);
 
 	/*
+	 * Setup the syscall map in the vDOS
+	 */
+	vdso_setup_syscall_map();
+	/*
 	 * Initialize the vDSO images in memory, that is do necessary
 	 * fixups of vDSO symbols, locate trampolines, etc...
 	 */
 	if (vdso_setup()) {
 		printk(KERN_ERR "vDSO setup failure, not enabled !\n");
-		/* XXX should free pages here ? */
-		vdso64_pages = vdso32_pages = 0;
+		vdso32_pages = 0;
+#ifdef CONFIG_PPC64
+		vdso64_pages = 0;
+#endif
 		return;
 	}
 
 	/* Make sure pages are in the correct state */
-	for (i = 0; i < vdso64_pages; i++) {
-		struct page *pg = virt_to_page(vdso64_kbase + i*PAGE_SIZE);
+	for (i = 0; i < vdso32_pages; i++) {
+		struct page *pg = virt_to_page(vdso32_kbase + i*PAGE_SIZE);
 		ClearPageReserved(pg);
 		get_page(pg);
+
 	}
-	for (i = 0; i < vdso32_pages; i++) {
-		struct page *pg = virt_to_page(vdso32_kbase + i*PAGE_SIZE);
+#ifdef CONFIG_PPC64
+	for (i = 0; i < vdso64_pages; i++) {
+		struct page *pg = virt_to_page(vdso64_kbase + i*PAGE_SIZE);
 		ClearPageReserved(pg);
 		get_page(pg);
 	}
+#endif /* CONFIG_PPC64 */
+
+	get_page(virt_to_page(vdso_data));
 }
 
 int in_gate_area_no_task(unsigned long addr)
diff --git a/arch/ppc64/kernel/vdso32/Makefile b/arch/powerpc/kernel/vdso32/Makefile
index 0b1b0df973eb..8a3bed5f143a 100644
--- a/arch/ppc64/kernel/vdso32/Makefile
+++ b/arch/powerpc/kernel/vdso32/Makefile
@@ -5,6 +5,10 @@ obj-vdso32 = sigtramp.o gettimeofday.o datapage.o cacheflush.o note.o
 
 # Build rules
 
+ifeq ($(CONFIG_PPC32),y)
+CROSS32CC := $(CC)
+endif
+
 targets := $(obj-vdso32) vdso32.so
 obj-vdso32 := $(addprefix $(obj)/, $(obj-vdso32))
 
@@ -15,7 +19,7 @@ EXTRA_AFLAGS := -D__VDSO32__ -s
 
 obj-y += vdso32_wrapper.o
 extra-y += vdso32.lds
-CPPFLAGS_vdso32.lds += -P -C -U$(ARCH)
+CPPFLAGS_vdso32.lds += -P -C -Upowerpc
 
 # Force dependency (incbin is bad)
 $(obj)/vdso32_wrapper.o : $(obj)/vdso32.so
diff --git a/arch/ppc64/kernel/vdso32/cacheflush.S b/arch/powerpc/kernel/vdso32/cacheflush.S
index c8db993574ee..09629aea3e47 100644
--- a/arch/ppc64/kernel/vdso32/cacheflush.S
+++ b/arch/powerpc/kernel/vdso32/cacheflush.S
@@ -35,6 +35,7 @@ V_FUNCTION_BEGIN(__kernel_sync_dicache)
 	subf	r8,r6,r4		/* compute length */
 	add	r8,r8,r5		/* ensure we get enough */
 	srwi.	r8,r8,7			/* compute line count */
+	crclr	cr0*4+so
 	beqlr				/* nothing to do? */
 	mtctr	r8
 	mr	r3,r6
@@ -58,6 +59,7 @@ V_FUNCTION_END(__kernel_sync_dicache)
  */
 V_FUNCTION_BEGIN(__kernel_sync_dicache_p5)
   .cfi_startproc
+	crclr	cr0*4+so
 	sync
 	isync
 	li	r3,0
diff --git a/arch/ppc64/kernel/vdso32/datapage.S b/arch/powerpc/kernel/vdso32/datapage.S
index 4f4eb0be3992..4709f1d9542c 100644
--- a/arch/ppc64/kernel/vdso32/datapage.S
+++ b/arch/powerpc/kernel/vdso32/datapage.S
@@ -54,7 +54,6 @@ V_FUNCTION_BEGIN(__kernel_get_syscall_map)
   .cfi_startproc
 	mflr	r12
   .cfi_register lr,r12
-
 	mr	r4,r3
 	bl	__get_datapage@local
 	mtlr	r12
@@ -63,6 +62,25 @@ V_FUNCTION_BEGIN(__kernel_get_syscall_map)
 	beqlr
 	li	r0,__NR_syscalls
 	stw	r0,0(r4)
+	crclr	cr0*4+so
 	blr
   .cfi_endproc
 V_FUNCTION_END(__kernel_get_syscall_map)
+
+/*
+ * void unsigned long long  __kernel_get_tbfreq(void);
+ *
+ * returns the timebase frequency in HZ
+ */
+V_FUNCTION_BEGIN(__kernel_get_tbfreq)
+  .cfi_startproc
+	mflr	r12
+  .cfi_register lr,r12
+	bl	__get_datapage@local
+	lwz	r4,(CFG_TB_TICKS_PER_SEC + 4)(r3)
+	lwz	r3,CFG_TB_TICKS_PER_SEC(r3)
+	mtlr	r12
+	crclr	cr0*4+so
+	blr
+  .cfi_endproc
+V_FUNCTION_END(__kernel_get_tbfreq)
diff --git a/arch/powerpc/kernel/vdso32/gettimeofday.S b/arch/powerpc/kernel/vdso32/gettimeofday.S
new file mode 100644
index 000000000000..7eebff03a041
--- /dev/null
+++ b/arch/powerpc/kernel/vdso32/gettimeofday.S
@@ -0,0 +1,323 @@
+/*
+ * Userland implementation of gettimeofday() for 32 bits processes in a
+ * ppc64 kernel for use in the vDSO
+ *
+ * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org,
+ *                    IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/ppc_asm.h>
+#include <asm/vdso.h>
+#include <asm/asm-offsets.h>
+#include <asm/unistd.h>
+
+	.text
+/*
+ * Exact prototype of gettimeofday
+ *
+ * int __kernel_gettimeofday(struct timeval *tv, struct timezone *tz);
+ *
+ */
+V_FUNCTION_BEGIN(__kernel_gettimeofday)
+  .cfi_startproc
+	mflr	r12
+  .cfi_register lr,r12
+
+	mr	r10,r3			/* r10 saves tv */
+	mr	r11,r4			/* r11 saves tz */
+	bl	__get_datapage@local	/* get data page */
+	mr	r9, r3			/* datapage ptr in r9 */
+	bl	__do_get_xsec@local	/* get xsec from tb & kernel */
+	bne-	2f			/* out of line -> do syscall */
+
+	/* seconds are xsec >> 20 */
+	rlwinm	r5,r4,12,20,31
+	rlwimi	r5,r3,12,0,19
+	stw	r5,TVAL32_TV_SEC(r10)
+
+	/* get remaining xsec and convert to usec. we scale
+	 * up remaining xsec by 12 bits and get the top 32 bits
+	 * of the multiplication
+	 */
+	rlwinm	r5,r4,12,0,19
+	lis	r6,1000000@h
+	ori	r6,r6,1000000@l
+	mulhwu	r5,r5,r6
+	stw	r5,TVAL32_TV_USEC(r10)
+
+	cmpli	cr0,r11,0		/* check if tz is NULL */
+	beq	1f
+	lwz	r4,CFG_TZ_MINUTEWEST(r9)/* fill tz */
+	lwz	r5,CFG_TZ_DSTTIME(r9)
+	stw	r4,TZONE_TZ_MINWEST(r11)
+	stw	r5,TZONE_TZ_DSTTIME(r11)
+
+1:	mtlr	r12
+	crclr	cr0*4+so
+	li	r3,0
+	blr
+
+2:
+	mtlr	r12
+	mr	r3,r10
+	mr	r4,r11
+	li	r0,__NR_gettimeofday
+	sc
+	blr
+  .cfi_endproc
+V_FUNCTION_END(__kernel_gettimeofday)
+
+/*
+ * Exact prototype of clock_gettime()
+ *
+ * int __kernel_clock_gettime(clockid_t clock_id, struct timespec *tp);
+ *
+ */
+V_FUNCTION_BEGIN(__kernel_clock_gettime)
+  .cfi_startproc
+	/* Check for supported clock IDs */
+	cmpli	cr0,r3,CLOCK_REALTIME
+	cmpli	cr1,r3,CLOCK_MONOTONIC
+	cror	cr0*4+eq,cr0*4+eq,cr1*4+eq
+	bne	cr0,99f
+
+	mflr	r12			/* r12 saves lr */
+  .cfi_register lr,r12
+	mr	r10,r3			/* r10 saves id */
+	mr	r11,r4			/* r11 saves tp */
+	bl	__get_datapage@local	/* get data page */
+	mr	r9,r3			/* datapage ptr in r9 */
+	beq	cr1,50f			/* if monotonic -> jump there */
+
+	/*
+	 * CLOCK_REALTIME
+	 */
+
+	bl	__do_get_xsec@local	/* get xsec from tb & kernel */
+	bne-	98f			/* out of line -> do syscall */
+
+	/* seconds are xsec >> 20 */
+	rlwinm	r5,r4,12,20,31
+	rlwimi	r5,r3,12,0,19
+	stw	r5,TSPC32_TV_SEC(r11)
+
+	/* get remaining xsec and convert to nsec. we scale
+	 * up remaining xsec by 12 bits and get the top 32 bits
+	 * of the multiplication, then we multiply by 1000
+	 */
+	rlwinm	r5,r4,12,0,19
+	lis	r6,1000000@h
+	ori	r6,r6,1000000@l
+	mulhwu	r5,r5,r6
+	mulli	r5,r5,1000
+	stw	r5,TSPC32_TV_NSEC(r11)
+	mtlr	r12
+	crclr	cr0*4+so
+	li	r3,0
+	blr
+
+	/*
+	 * CLOCK_MONOTONIC
+	 */
+
+50:	bl	__do_get_xsec@local	/* get xsec from tb & kernel */
+	bne-	98f			/* out of line -> do syscall */
+
+	/* seconds are xsec >> 20 */
+	rlwinm	r6,r4,12,20,31
+	rlwimi	r6,r3,12,0,19
+
+	/* get remaining xsec and convert to nsec. we scale
+	 * up remaining xsec by 12 bits and get the top 32 bits
+	 * of the multiplication, then we multiply by 1000
+	 */
+	rlwinm	r7,r4,12,0,19
+	lis	r5,1000000@h
+	ori	r5,r5,1000000@l
+	mulhwu	r7,r7,r5
+	mulli	r7,r7,1000
+
+	/* now we must fixup using wall to monotonic. We need to snapshot
+	 * that value and do the counter trick again. Fortunately, we still
+	 * have the counter value in r8 that was returned by __do_get_xsec.
+	 * At this point, r6,r7 contain our sec/nsec values, r3,r4 and r5
+	 * can be used
+	 */
+
+	lwz	r3,WTOM_CLOCK_SEC(r9)
+	lwz	r4,WTOM_CLOCK_NSEC(r9)
+
+	/* We now have our result in r3,r4. We create a fake dependency
+	 * on that result and re-check the counter
+	 */
+	or	r5,r4,r3
+	xor	r0,r5,r5
+	add	r9,r9,r0
+#ifdef CONFIG_PPC64
+	lwz	r0,(CFG_TB_UPDATE_COUNT+4)(r9)
+#else
+	lwz	r0,(CFG_TB_UPDATE_COUNT)(r9)
+#endif
+        cmpl    cr0,r8,r0		/* check if updated */
+	bne-	50b
+
+	/* Calculate and store result. Note that this mimmics the C code,
+	 * which may cause funny results if nsec goes negative... is that
+	 * possible at all ?
+	 */
+	add	r3,r3,r6
+	add	r4,r4,r7
+	lis	r5,NSEC_PER_SEC@h
+	ori	r5,r5,NSEC_PER_SEC@l
+	cmpl	cr0,r4,r5
+	cmpli	cr1,r4,0
+	blt	1f
+	subf	r4,r5,r4
+	addi	r3,r3,1
+1:	bge	cr1,1f
+	addi	r3,r3,-1
+	add	r4,r4,r5
+1:	stw	r3,TSPC32_TV_SEC(r11)
+	stw	r4,TSPC32_TV_NSEC(r11)
+
+	mtlr	r12
+	crclr	cr0*4+so
+	li	r3,0
+	blr
+
+	/*
+	 * syscall fallback
+	 */
+98:
+	mtlr	r12
+	mr	r3,r10
+	mr	r4,r11
+99:
+	li	r0,__NR_clock_gettime
+	sc
+	blr
+  .cfi_endproc
+V_FUNCTION_END(__kernel_clock_gettime)
+
+
+/*
+ * Exact prototype of clock_getres()
+ *
+ * int __kernel_clock_getres(clockid_t clock_id, struct timespec *res);
+ *
+ */
+V_FUNCTION_BEGIN(__kernel_clock_getres)
+  .cfi_startproc
+	/* Check for supported clock IDs */
+	cmpwi	cr0,r3,CLOCK_REALTIME
+	cmpwi	cr1,r3,CLOCK_MONOTONIC
+	cror	cr0*4+eq,cr0*4+eq,cr1*4+eq
+	bne	cr0,99f
+
+	li	r3,0
+	cmpli	cr0,r4,0
+	crclr	cr0*4+so
+	beqlr
+	lis	r5,CLOCK_REALTIME_RES@h
+	ori	r5,r5,CLOCK_REALTIME_RES@l
+	stw	r3,TSPC32_TV_SEC(r4)
+	stw	r5,TSPC32_TV_NSEC(r4)
+	blr
+
+	/*
+	 * syscall fallback
+	 */
+99:
+	li	r0,__NR_clock_getres
+	sc
+	blr
+  .cfi_endproc
+V_FUNCTION_END(__kernel_clock_getres)
+
+
+/*
+ * This is the core of gettimeofday() & friends, it returns the xsec
+ * value in r3 & r4 and expects the datapage ptr (non clobbered)
+ * in r9. clobbers r0,r4,r5,r6,r7,r8.
+ * When returning, r8 contains the counter value that can be reused
+ * by the monotonic clock implementation
+ */
+__do_get_xsec:
+  .cfi_startproc
+	/* Check for update count & load values. We use the low
+	 * order 32 bits of the update count
+	 */
+#ifdef CONFIG_PPC64
+1:	lwz	r8,(CFG_TB_UPDATE_COUNT+4)(r9)
+#else
+1:	lwz	r8,(CFG_TB_UPDATE_COUNT)(r9)
+#endif
+	andi.	r0,r8,1			/* pending update ? loop */
+	bne-	1b
+	xor	r0,r8,r8		/* create dependency */
+	add	r9,r9,r0
+
+	/* Load orig stamp (offset to TB) */
+	lwz	r5,CFG_TB_ORIG_STAMP(r9)
+	lwz	r6,(CFG_TB_ORIG_STAMP+4)(r9)
+
+	/* Get a stable TB value */
+2:	mftbu	r3
+	mftbl	r4
+	mftbu	r0
+	cmpl	cr0,r3,r0
+	bne-	2b
+
+	/* Substract tb orig stamp. If the high part is non-zero, we jump to
+	 * the slow path which call the syscall.
+	 * If it's ok, then we have our 32 bits tb_ticks value in r7
+	 */
+	subfc	r7,r6,r4
+	subfe.	r0,r5,r3
+	bne-	3f
+
+	/* Load scale factor & do multiplication */
+	lwz	r5,CFG_TB_TO_XS(r9)	/* load values */
+	lwz	r6,(CFG_TB_TO_XS+4)(r9)
+	mulhwu	r4,r7,r5
+	mulhwu	r6,r7,r6
+	mullw	r0,r7,r5
+	addc	r6,r6,r0
+
+	/* At this point, we have the scaled xsec value in r4 + XER:CA
+	 * we load & add the stamp since epoch
+	 */
+	lwz	r5,CFG_STAMP_XSEC(r9)
+	lwz	r6,(CFG_STAMP_XSEC+4)(r9)
+	adde	r4,r4,r6
+	addze	r3,r5
+
+	/* We now have our result in r3,r4. We create a fake dependency
+	 * on that result and re-check the counter
+	 */
+	or	r6,r4,r3
+	xor	r0,r6,r6
+	add	r9,r9,r0
+#ifdef CONFIG_PPC64
+	lwz	r0,(CFG_TB_UPDATE_COUNT+4)(r9)
+#else
+	lwz	r0,(CFG_TB_UPDATE_COUNT)(r9)
+#endif
+        cmpl    cr0,r8,r0		/* check if updated */
+	bne-	1b
+
+	/* Warning ! The caller expects CR:EQ to be set to indicate a
+	 * successful calculation (so it won't fallback to the syscall
+	 * method). We have overriden that CR bit in the counter check,
+	 * but fortunately, the loop exit condition _is_ CR:EQ set, so
+	 * we can exit safely here. If you change this code, be careful
+	 * of that side effect.
+	 */
+3:	blr
+  .cfi_endproc
diff --git a/arch/ppc64/kernel/vdso32/note.S b/arch/powerpc/kernel/vdso32/note.S
index d4b5be4f3d5f..d4b5be4f3d5f 100644
--- a/arch/ppc64/kernel/vdso32/note.S
+++ b/arch/powerpc/kernel/vdso32/note.S
diff --git a/arch/ppc64/kernel/vdso32/sigtramp.S b/arch/powerpc/kernel/vdso32/sigtramp.S
index e04642781917..e04642781917 100644
--- a/arch/ppc64/kernel/vdso32/sigtramp.S
+++ b/arch/powerpc/kernel/vdso32/sigtramp.S
diff --git a/arch/ppc64/kernel/vdso32/vdso32.lds.S b/arch/powerpc/kernel/vdso32/vdso32.lds.S
index 6f87a916a394..f4bad720cb0a 100644
--- a/arch/ppc64/kernel/vdso32/vdso32.lds.S
+++ b/arch/powerpc/kernel/vdso32/vdso32.lds.S
@@ -102,9 +102,12 @@ VERSION
 {
   VDSO_VERSION_STRING {
     global:
-	__kernel_datapage_offset; /* Has to be there for the kernel to find it */
+	__kernel_datapage_offset; /* Has to be there for the kernel to find */
 	__kernel_get_syscall_map;
 	__kernel_gettimeofday;
+	__kernel_clock_gettime;
+	__kernel_clock_getres;
+	__kernel_get_tbfreq;
 	__kernel_sync_dicache;
 	__kernel_sync_dicache_p5;
 	__kernel_sigtramp32;
diff --git a/arch/ppc64/kernel/vdso32/vdso32_wrapper.S b/arch/powerpc/kernel/vdso32/vdso32_wrapper.S
index 76ca28e09d29..556f0caa5d84 100644
--- a/arch/ppc64/kernel/vdso32/vdso32_wrapper.S
+++ b/arch/powerpc/kernel/vdso32/vdso32_wrapper.S
@@ -6,7 +6,7 @@
 	.globl vdso32_start, vdso32_end
 	.balign PAGE_SIZE
 vdso32_start:
-	.incbin "arch/ppc64/kernel/vdso32/vdso32.so"
+	.incbin "arch/powerpc/kernel/vdso32/vdso32.so"
 	.balign PAGE_SIZE
 vdso32_end:
 
diff --git a/arch/ppc64/kernel/vdso64/Makefile b/arch/powerpc/kernel/vdso64/Makefile
index ab39988452cc..ab39988452cc 100644
--- a/arch/ppc64/kernel/vdso64/Makefile
+++ b/arch/powerpc/kernel/vdso64/Makefile
diff --git a/arch/ppc64/kernel/vdso64/cacheflush.S b/arch/powerpc/kernel/vdso64/cacheflush.S
index d4a0ad28d534..cb4ae0a5edd0 100644
--- a/arch/ppc64/kernel/vdso64/cacheflush.S
+++ b/arch/powerpc/kernel/vdso64/cacheflush.S
@@ -35,6 +35,7 @@ V_FUNCTION_BEGIN(__kernel_sync_dicache)
 	subf	r8,r6,r4		/* compute length */
 	add	r8,r8,r5		/* ensure we get enough */
 	srwi.	r8,r8,7			/* compute line count */
+	crclr	cr0*4+so
 	beqlr				/* nothing to do? */
 	mtctr	r8
 	mr	r3,r6
@@ -58,6 +59,7 @@ V_FUNCTION_END(__kernel_sync_dicache)
  */
 V_FUNCTION_BEGIN(__kernel_sync_dicache_p5)
   .cfi_startproc
+	crclr	cr0*4+so
 	sync
 	isync
 	li	r3,0
diff --git a/arch/ppc64/kernel/vdso64/datapage.S b/arch/powerpc/kernel/vdso64/datapage.S
index ed6e599ae824..3b2dd7d0c1eb 100644
--- a/arch/ppc64/kernel/vdso64/datapage.S
+++ b/arch/powerpc/kernel/vdso64/datapage.S
@@ -54,15 +54,33 @@ V_FUNCTION_BEGIN(__kernel_get_syscall_map)
   .cfi_startproc
 	mflr	r12
   .cfi_register lr,r12
-
 	mr	r4,r3
 	bl	V_LOCAL_FUNC(__get_datapage)
 	mtlr	r12
 	addi	r3,r3,CFG_SYSCALL_MAP64
 	cmpli	cr0,r4,0
+	crclr	cr0*4+so
 	beqlr
 	li	r0,__NR_syscalls
 	stw	r0,0(r4)
 	blr
   .cfi_endproc
 V_FUNCTION_END(__kernel_get_syscall_map)
+
+
+/*
+ * void unsigned long  __kernel_get_tbfreq(void);
+ *
+ * returns the timebase frequency in HZ
+ */
+V_FUNCTION_BEGIN(__kernel_get_tbfreq)
+  .cfi_startproc
+	mflr	r12
+  .cfi_register lr,r12
+	bl	V_LOCAL_FUNC(__get_datapage)
+	ld	r3,CFG_TB_TICKS_PER_SEC(r3)
+	mtlr	r12
+	crclr	cr0*4+so
+	blr
+  .cfi_endproc
+V_FUNCTION_END(__kernel_get_tbfreq)
diff --git a/arch/powerpc/kernel/vdso64/gettimeofday.S b/arch/powerpc/kernel/vdso64/gettimeofday.S
new file mode 100644
index 000000000000..ccaeda5136d1
--- /dev/null
+++ b/arch/powerpc/kernel/vdso64/gettimeofday.S
@@ -0,0 +1,253 @@
+
+	/*
+ * Userland implementation of gettimeofday() for 64 bits processes in a
+ * ppc64 kernel for use in the vDSO
+ *
+ * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org),
+ *                    IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/ppc_asm.h>
+#include <asm/vdso.h>
+#include <asm/asm-offsets.h>
+#include <asm/unistd.h>
+
+	.text
+/*
+ * Exact prototype of gettimeofday
+ *
+ * int __kernel_gettimeofday(struct timeval *tv, struct timezone *tz);
+ *
+ */
+V_FUNCTION_BEGIN(__kernel_gettimeofday)
+  .cfi_startproc
+	mflr	r12
+  .cfi_register lr,r12
+
+	mr	r11,r3			/* r11 holds tv */
+	mr	r10,r4			/* r10 holds tz */
+	bl	V_LOCAL_FUNC(__get_datapage)	/* get data page */
+	bl	V_LOCAL_FUNC(__do_get_xsec)	/* get xsec from tb & kernel */
+	lis     r7,15			/* r7 = 1000000 = USEC_PER_SEC */
+	ori     r7,r7,16960
+	rldicl  r5,r4,44,20		/* r5 = sec = xsec / XSEC_PER_SEC */
+	rldicr  r6,r5,20,43		/* r6 = sec * XSEC_PER_SEC */
+	std	r5,TVAL64_TV_SEC(r11)	/* store sec in tv */
+	subf	r0,r6,r4		/* r0 = xsec = (xsec - r6) */
+	mulld   r0,r0,r7		/* usec = (xsec * USEC_PER_SEC) /
+					 * XSEC_PER_SEC
+					 */
+	rldicl  r0,r0,44,20
+	cmpldi	cr0,r10,0		/* check if tz is NULL */
+	std	r0,TVAL64_TV_USEC(r11)	/* store usec in tv */
+	beq	1f
+	lwz	r4,CFG_TZ_MINUTEWEST(r3)/* fill tz */
+	lwz	r5,CFG_TZ_DSTTIME(r3)
+	stw	r4,TZONE_TZ_MINWEST(r10)
+	stw	r5,TZONE_TZ_DSTTIME(r10)
+1:	mtlr	r12
+	crclr	cr0*4+so
+	li	r3,0			/* always success */
+	blr
+  .cfi_endproc
+V_FUNCTION_END(__kernel_gettimeofday)
+
+
+/*
+ * Exact prototype of clock_gettime()
+ *
+ * int __kernel_clock_gettime(clockid_t clock_id, struct timespec *tp);
+ *
+ */
+V_FUNCTION_BEGIN(__kernel_clock_gettime)
+  .cfi_startproc
+	/* Check for supported clock IDs */
+	cmpwi	cr0,r3,CLOCK_REALTIME
+	cmpwi	cr1,r3,CLOCK_MONOTONIC
+	cror	cr0*4+eq,cr0*4+eq,cr1*4+eq
+	bne	cr0,99f
+
+	mflr	r12			/* r12 saves lr */
+  .cfi_register lr,r12
+	mr	r10,r3			/* r10 saves id */
+	mr	r11,r4			/* r11 saves tp */
+	bl	V_LOCAL_FUNC(__get_datapage)	/* get data page */
+	beq	cr1,50f			/* if monotonic -> jump there */
+
+	/*
+	 * CLOCK_REALTIME
+	 */
+
+	bl	V_LOCAL_FUNC(__do_get_xsec)	/* get xsec from tb & kernel */
+
+	lis     r7,15			/* r7 = 1000000 = USEC_PER_SEC */
+	ori     r7,r7,16960
+	rldicl  r5,r4,44,20		/* r5 = sec = xsec / XSEC_PER_SEC */
+	rldicr  r6,r5,20,43		/* r6 = sec * XSEC_PER_SEC */
+	std	r5,TSPC64_TV_SEC(r11)	/* store sec in tv */
+	subf	r0,r6,r4		/* r0 = xsec = (xsec - r6) */
+	mulld   r0,r0,r7		/* usec = (xsec * USEC_PER_SEC) /
+					 * XSEC_PER_SEC
+					 */
+	rldicl  r0,r0,44,20
+	mulli	r0,r0,1000		/* nsec = usec * 1000 */
+	std	r0,TSPC64_TV_NSEC(r11)	/* store nsec in tp */
+
+	mtlr	r12
+	crclr	cr0*4+so
+	li	r3,0
+	blr
+
+	/*
+	 * CLOCK_MONOTONIC
+	 */
+
+50:	bl	V_LOCAL_FUNC(__do_get_xsec)	/* get xsec from tb & kernel */
+
+	lis     r7,15			/* r7 = 1000000 = USEC_PER_SEC */
+	ori     r7,r7,16960
+	rldicl  r5,r4,44,20		/* r5 = sec = xsec / XSEC_PER_SEC */
+	rldicr  r6,r5,20,43		/* r6 = sec * XSEC_PER_SEC */
+	subf	r0,r6,r4		/* r0 = xsec = (xsec - r6) */
+	mulld   r0,r0,r7		/* usec = (xsec * USEC_PER_SEC) /
+					 * XSEC_PER_SEC
+					 */
+	rldicl  r6,r0,44,20
+	mulli	r6,r6,1000		/* nsec = usec * 1000 */
+
+	/* now we must fixup using wall to monotonic. We need to snapshot
+	 * that value and do the counter trick again. Fortunately, we still
+	 * have the counter value in r8 that was returned by __do_get_xsec.
+	 * At this point, r5,r6 contain our sec/nsec values.
+	 * can be used
+	 */
+
+	lwa	r4,WTOM_CLOCK_SEC(r3)
+	lwa	r7,WTOM_CLOCK_NSEC(r3)
+
+	/* We now have our result in r4,r7. We create a fake dependency
+	 * on that result and re-check the counter
+	 */
+	or	r9,r4,r7
+	xor	r0,r9,r9
+	add	r3,r3,r0
+	ld	r0,CFG_TB_UPDATE_COUNT(r3)
+        cmpld   cr0,r0,r8		/* check if updated */
+	bne-	50b
+
+	/* Calculate and store result. Note that this mimmics the C code,
+	 * which may cause funny results if nsec goes negative... is that
+	 * possible at all ?
+	 */
+	add	r4,r4,r5
+	add	r7,r7,r6
+	lis	r9,NSEC_PER_SEC@h
+	ori	r9,r9,NSEC_PER_SEC@l
+	cmpl	cr0,r7,r9
+	cmpli	cr1,r7,0
+	blt	1f
+	subf	r7,r9,r7
+	addi	r4,r4,1
+1:	bge	cr1,1f
+	addi	r4,r4,-1
+	add	r7,r7,r9
+1:	std	r4,TSPC64_TV_SEC(r11)
+	std	r7,TSPC64_TV_NSEC(r11)
+
+	mtlr	r12
+	crclr	cr0*4+so
+	li	r3,0
+	blr
+
+	/*
+	 * syscall fallback
+	 */
+98:
+	mtlr	r12
+	mr	r3,r10
+	mr	r4,r11
+99:
+	li	r0,__NR_clock_gettime
+	sc
+	blr
+  .cfi_endproc
+V_FUNCTION_END(__kernel_clock_gettime)
+
+
+/*
+ * Exact prototype of clock_getres()
+ *
+ * int __kernel_clock_getres(clockid_t clock_id, struct timespec *res);
+ *
+ */
+V_FUNCTION_BEGIN(__kernel_clock_getres)
+  .cfi_startproc
+	/* Check for supported clock IDs */
+	cmpwi	cr0,r3,CLOCK_REALTIME
+	cmpwi	cr1,r3,CLOCK_MONOTONIC
+	cror	cr0*4+eq,cr0*4+eq,cr1*4+eq
+	bne	cr0,99f
+
+	li	r3,0
+	cmpli	cr0,r4,0
+	crclr	cr0*4+so
+	beqlr
+	lis	r5,CLOCK_REALTIME_RES@h
+	ori	r5,r5,CLOCK_REALTIME_RES@l
+	std	r3,TSPC64_TV_SEC(r4)
+	std	r5,TSPC64_TV_NSEC(r4)
+	blr
+
+	/*
+	 * syscall fallback
+	 */
+99:
+	li	r0,__NR_clock_getres
+	sc
+	blr
+  .cfi_endproc
+V_FUNCTION_END(__kernel_clock_getres)
+
+
+/*
+ * This is the core of gettimeofday(), it returns the xsec
+ * value in r4 and expects the datapage ptr (non clobbered)
+ * in r3. clobbers r0,r4,r5,r6,r7,r8
+ * When returning, r8 contains the counter value that can be reused
+ */
+V_FUNCTION_BEGIN(__do_get_xsec)
+  .cfi_startproc
+	/* check for update count & load values */
+1:	ld	r8,CFG_TB_UPDATE_COUNT(r3)
+	andi.	r0,r4,1			/* pending update ? loop */
+	bne-	1b
+	xor	r0,r4,r4		/* create dependency */
+	add	r3,r3,r0
+
+	/* Get TB & offset it */
+	mftb	r7
+	ld	r9,CFG_TB_ORIG_STAMP(r3)
+	subf	r7,r9,r7
+
+	/* Scale result */
+	ld	r5,CFG_TB_TO_XS(r3)
+	mulhdu	r7,r7,r5
+
+	/* Add stamp since epoch */
+	ld	r6,CFG_STAMP_XSEC(r3)
+	add	r4,r6,r7
+
+	xor	r0,r4,r4
+	add	r3,r3,r0
+	ld	r0,CFG_TB_UPDATE_COUNT(r3)
+        cmpld   cr0,r0,r8		/* check if updated */
+	bne-	1b
+	blr
+  .cfi_endproc
+V_FUNCTION_END(__do_get_xsec)
diff --git a/arch/ppc64/kernel/vdso64/note.S b/arch/powerpc/kernel/vdso64/note.S
index dc2a509f7e8a..dc2a509f7e8a 100644
--- a/arch/ppc64/kernel/vdso64/note.S
+++ b/arch/powerpc/kernel/vdso64/note.S
diff --git a/arch/ppc64/kernel/vdso64/sigtramp.S b/arch/powerpc/kernel/vdso64/sigtramp.S
index 8ae8f205e470..31b604ab56de 100644
--- a/arch/ppc64/kernel/vdso64/sigtramp.S
+++ b/arch/powerpc/kernel/vdso64/sigtramp.S
@@ -15,6 +15,7 @@
 #include <asm/ppc_asm.h>
 #include <asm/unistd.h>
 #include <asm/vdso.h>
+#include <asm/ptrace.h>		/* XXX for __SIGNAL_FRAMESIZE */
 
 	.text
 
diff --git a/arch/ppc64/kernel/vdso64/vdso64.lds.S b/arch/powerpc/kernel/vdso64/vdso64.lds.S
index 9cb28181da80..4bdf224464ab 100644
--- a/arch/ppc64/kernel/vdso64/vdso64.lds.S
+++ b/arch/powerpc/kernel/vdso64/vdso64.lds.S
@@ -102,9 +102,12 @@ VERSION
 {
   VDSO_VERSION_STRING {
     global:
-	__kernel_datapage_offset; /* Has to be there for the kernel to find it */
+	__kernel_datapage_offset; /* Has to be there for the kernel to find */
 	__kernel_get_syscall_map;
     	__kernel_gettimeofday;
+	__kernel_clock_gettime;
+	__kernel_clock_getres;
+	__kernel_get_tbfreq;
 	__kernel_sync_dicache;
 	__kernel_sync_dicache_p5;
 	__kernel_sigtramp_rt64;
diff --git a/arch/ppc64/kernel/vdso64/vdso64_wrapper.S b/arch/powerpc/kernel/vdso64/vdso64_wrapper.S
index 771c2741c492..0529cb9e3b97 100644
--- a/arch/ppc64/kernel/vdso64/vdso64_wrapper.S
+++ b/arch/powerpc/kernel/vdso64/vdso64_wrapper.S
@@ -6,7 +6,7 @@
 	.globl vdso64_start, vdso64_end
 	.balign PAGE_SIZE
 vdso64_start:
-	.incbin "arch/ppc64/kernel/vdso64/vdso64.so"
+	.incbin "arch/powerpc/kernel/vdso64/vdso64.so"
 	.balign PAGE_SIZE
 vdso64_end:
 
diff --git a/arch/ppc/kernel/vecemu.c b/arch/powerpc/kernel/vecemu.c
index 604d0947cb20..604d0947cb20 100644
--- a/arch/ppc/kernel/vecemu.c
+++ b/arch/powerpc/kernel/vecemu.c
diff --git a/arch/ppc64/kernel/vector.S b/arch/powerpc/kernel/vector.S
index b79d33e4001e..66b3d03c5fa5 100644
--- a/arch/ppc64/kernel/vector.S
+++ b/arch/powerpc/kernel/vector.S
@@ -1,11 +1,26 @@
+#include <linux/config.h>
 #include <asm/ppc_asm.h>
-#include <asm/processor.h>
+#include <asm/reg.h>
 
 /*
  * The routines below are in assembler so we can closely control the
  * usage of floating-point registers.  These routines must be called
  * with preempt disabled.
  */
+#ifdef CONFIG_PPC32
+	.data
+fpzero:
+	.long	0
+fpone:
+	.long	0x3f800000	/* 1.0 in single-precision FP */
+fphalf:
+	.long	0x3f000000	/* 0.5 in single-precision FP */
+
+#define LDCONST(fr, name)	\
+	lis	r11,name@ha;	\
+	lfs	fr,name@l(r11)
+#else
+
 	.section ".toc","aw"
 fpzero:
 	.tc	FD_0_0[TC],0
@@ -14,32 +29,42 @@ fpone:
 fphalf:
 	.tc	FD_3fe00000_0[TC],0x3fe0000000000000	/* 0.5 */
 
+#define LDCONST(fr, name)	\
+	lfd	fr,name@toc(r2)
+#endif
+
 	.text
 /*
  * Internal routine to enable floating point and set FPSCR to 0.
  * Don't call it from C; it doesn't use the normal calling convention.
  */
 fpenable:
+#ifdef CONFIG_PPC32
+	stwu	r1,-64(r1)
+#else
+	stdu	r1,-64(r1)
+#endif
 	mfmsr	r10
 	ori	r11,r10,MSR_FP
 	mtmsr	r11
 	isync
-	stfd	fr31,-8(r1)
-	stfd	fr0,-16(r1)
-	stfd	fr1,-24(r1)
+	stfd	fr0,24(r1)
+	stfd	fr1,16(r1)
+	stfd	fr31,8(r1)
+	LDCONST(fr1, fpzero)
 	mffs	fr31
-	lfd	fr1,fpzero@toc(r2)
 	mtfsf	0xff,fr1
 	blr
 
 fpdisable:
 	mtlr	r12
 	mtfsf	0xff,fr31
-	lfd	fr1,-24(r1)
-	lfd	fr0,-16(r1)
-	lfd	fr31,-8(r1)
+	lfd	fr31,8(r1)
+	lfd	fr1,16(r1)
+	lfd	fr0,24(r1)
 	mtmsr	r10
 	isync
+	addi	r1,r1,64
 	blr
 
 /*
@@ -82,7 +107,7 @@ _GLOBAL(vsubfp)
 _GLOBAL(vmaddfp)
 	mflr	r12
 	bl	fpenable
-	stfd	fr2,-32(r1)
+	stfd	fr2,32(r1)
 	li	r0,4
 	mtctr	r0
 	li	r7,0
@@ -93,7 +118,7 @@ _GLOBAL(vmaddfp)
 	stfsx	fr0,r3,r7
 	addi	r7,r7,4
 	bdnz	1b
-	lfd	fr2,-32(r1)
+	lfd	fr2,32(r1)
 	b	fpdisable
 
 /*
@@ -102,7 +127,7 @@ _GLOBAL(vmaddfp)
 _GLOBAL(vnmsubfp)
 	mflr	r12
 	bl	fpenable
-	stfd	fr2,-32(r1)
+	stfd	fr2,32(r1)
 	li	r0,4
 	mtctr	r0
 	li	r7,0
@@ -113,7 +138,7 @@ _GLOBAL(vnmsubfp)
 	stfsx	fr0,r3,r7
 	addi	r7,r7,4
 	bdnz	1b
-	lfd	fr2,-32(r1)
+	lfd	fr2,32(r1)
 	b	fpdisable
 
 /*
@@ -124,7 +149,7 @@ _GLOBAL(vrefp)
 	mflr	r12
 	bl	fpenable
 	li	r0,4
-	lfd	fr1,fpone@toc(r2)
+	LDCONST(fr1, fpone)
 	mtctr	r0
 	li	r6,0
 1:	lfsx	fr0,r4,r6
@@ -143,13 +168,13 @@ _GLOBAL(vrefp)
 _GLOBAL(vrsqrtefp)
 	mflr	r12
 	bl	fpenable
-	stfd	fr2,-32(r1)
-	stfd	fr3,-40(r1)
-	stfd	fr4,-48(r1)
-	stfd	fr5,-56(r1)
+	stfd	fr2,32(r1)
+	stfd	fr3,40(r1)
+	stfd	fr4,48(r1)
+	stfd	fr5,56(r1)
 	li	r0,4
-	lfd	fr4,fpone@toc(r2)
-	lfd	fr5,fphalf@toc(r2)
+	LDCONST(fr4, fpone)
+	LDCONST(fr5, fphalf)
 	mtctr	r0
 	li	r6,0
 1:	lfsx	fr0,r4,r6
@@ -165,8 +190,8 @@ _GLOBAL(vrsqrtefp)
 	stfsx	fr1,r3,r6
 	addi	r6,r6,4
 	bdnz	1b
-	lfd	fr5,-56(r1)
-	lfd	fr4,-48(r1)
-	lfd	fr3,-40(r1)
-	lfd	fr2,-32(r1)
+	lfd	fr5,56(r1)
+	lfd	fr4,48(r1)
+	lfd	fr3,40(r1)
+	lfd	fr2,32(r1)
 	b	fpdisable
diff --git a/arch/ppc64/kernel/vio.c b/arch/powerpc/kernel/vio.c
index c90e1dd875ce..71a6addf9f7f 100644
--- a/arch/ppc64/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -21,6 +21,7 @@
 #include <asm/iommu.h>
 #include <asm/dma.h>
 #include <asm/vio.h>
+#include <asm/prom.h>
 
 static const struct vio_device_id *vio_match_device(
 		const struct vio_device_id *, const struct vio_dev *);
@@ -69,6 +70,16 @@ static int vio_bus_remove(struct device *dev)
 	return 1;
 }
 
+/* convert from struct device to struct vio_dev and pass to driver. */
+static void vio_bus_shutdown(struct device *dev)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	struct vio_driver *viodrv = to_vio_driver(dev->driver);
+
+	if (viodrv->shutdown)
+		viodrv->shutdown(viodev);
+}
+
 /**
  * vio_register_driver: - Register a new vio driver
  * @drv:	The vio_driver structure to be registered.
@@ -76,13 +87,13 @@ static int vio_bus_remove(struct device *dev)
 int vio_register_driver(struct vio_driver *viodrv)
 {
 	printk(KERN_DEBUG "%s: driver %s registering\n", __FUNCTION__,
-		viodrv->name);
+		viodrv->driver.name);
 
 	/* fill in 'struct driver' fields */
-	viodrv->driver.name = viodrv->name;
 	viodrv->driver.bus = &vio_bus_type;
 	viodrv->driver.probe = vio_bus_probe;
 	viodrv->driver.remove = vio_bus_remove;
+	viodrv->driver.shutdown = vio_bus_shutdown;
 
 	return driver_register(&viodrv->driver);
 }
@@ -218,7 +229,7 @@ static void vio_unmap_sg(struct device *dev, struct scatterlist *sglist,
 }
 
 static void *vio_alloc_coherent(struct device *dev, size_t size,
-			   dma_addr_t *dma_handle, unsigned int __nocast flag)
+			   dma_addr_t *dma_handle, gfp_t flag)
 {
 	return iommu_alloc_coherent(to_vio_dev(dev)->iommu_table, size,
 			dma_handle, flag);
@@ -255,7 +266,33 @@ static int vio_bus_match(struct device *dev, struct device_driver *drv)
 	return (ids != NULL) && (vio_match_device(ids, vio_dev) != NULL);
 }
 
+static int vio_hotplug(struct device *dev, char **envp, int num_envp,
+			char *buffer, int buffer_size)
+{
+	const struct vio_dev *vio_dev = to_vio_dev(dev);
+	char *cp;
+	int length;
+
+	if (!num_envp)
+		return -ENOMEM;
+
+	if (!vio_dev->dev.platform_data)
+		return -ENODEV;
+	cp = (char *)get_property(vio_dev->dev.platform_data, "compatible", &length);
+	if (!cp)
+		return -ENODEV;
+
+	envp[0] = buffer;
+	length = scnprintf(buffer, buffer_size, "MODALIAS=vio:T%sS%s",
+				vio_dev->type, cp);
+	if (buffer_size - length <= 0)
+		return -ENOMEM;
+	envp[1] = NULL;
+	return 0;
+}
+
 struct bus_type vio_bus_type = {
 	.name = "vio",
+	.hotplug = vio_hotplug,
 	.match = vio_bus_match,
 };
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
new file mode 100644
index 000000000000..7fa7b15fd8e6
--- /dev/null
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -0,0 +1,258 @@
+#include <linux/config.h>
+#ifdef CONFIG_PPC64
+#include <asm/page.h>
+#else
+#define PAGE_SIZE	4096
+#define KERNELBASE	CONFIG_KERNEL_START
+#endif
+#include <asm-generic/vmlinux.lds.h>
+
+ENTRY(_stext)
+
+#ifdef CONFIG_PPC64
+OUTPUT_ARCH(powerpc:common64)
+jiffies = jiffies_64;
+#else
+OUTPUT_ARCH(powerpc:common)
+jiffies = jiffies_64 + 4;
+#endif
+SECTIONS
+{
+  /* Sections to be discarded. */
+  /DISCARD/ : {
+    *(.exitcall.exit)
+    *(.exit.data)
+  }
+
+  . = KERNELBASE;
+
+  /* Read-only sections, merged into text segment: */
+  .text : {
+    *(.text .text.*)
+    SCHED_TEXT
+    LOCK_TEXT
+    KPROBES_TEXT
+    *(.fixup)
+#ifdef CONFIG_PPC32
+    *(.got1)
+    __got2_start = .;
+    *(.got2)
+    __got2_end = .;
+#else
+    . = ALIGN(PAGE_SIZE);
+    _etext = .;
+#endif
+  }
+#ifdef CONFIG_PPC32
+  _etext = .;
+  PROVIDE (etext = .);
+
+  RODATA
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  .fixup   : { *(.fixup) }
+#endif
+
+	__ex_table : {
+		__start___ex_table = .;
+		*(__ex_table)
+		__stop___ex_table = .;
+	}
+
+	__bug_table : {
+		__start___bug_table = .;
+		*(__bug_table)
+		__stop___bug_table = .;
+	}
+
+#ifdef CONFIG_PPC64
+	__ftr_fixup : {
+		__start___ftr_fixup = .;
+		*(__ftr_fixup)
+		__stop___ftr_fixup = .;
+	}
+
+  RODATA
+#endif
+
+#ifdef CONFIG_PPC32
+  /* Read-write section, merged into data segment: */
+  . = ALIGN(PAGE_SIZE);
+  _sdata = .;
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.got.plt) *(.got)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+
+  . = ALIGN(PAGE_SIZE);
+  __nosave_begin = .;
+  .data_nosave : { *(.data.nosave) }
+  . = ALIGN(PAGE_SIZE);
+  __nosave_end = .;
+
+  . = ALIGN(32);
+  .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = ALIGN(8192);
+  .data.init_task : { *(.data.init_task) }
+#endif
+
+  /* will be freed after init */
+  . = ALIGN(PAGE_SIZE);
+  __init_begin = .;
+  .init.text : {
+	_sinittext = .;
+	*(.init.text)
+	_einittext = .;
+  }
+#ifdef CONFIG_PPC32
+  /* .exit.text is discarded at runtime, not link time,
+     to deal with references from __bug_table */
+  .exit.text : { *(.exit.text) }
+#endif
+  .init.data : {
+    *(.init.data);
+    __vtop_table_begin = .;
+    *(.vtop_fixup);
+    __vtop_table_end = .;
+    __ptov_table_begin = .;
+    *(.ptov_fixup);
+    __ptov_table_end = .;
+  }
+
+  . = ALIGN(16);
+  .init.setup : {
+    __setup_start = .;
+    *(.init.setup)
+    __setup_end = .;
+  }
+
+  .initcall.init : {
+	__initcall_start = .;
+	*(.initcall1.init)
+	*(.initcall2.init)
+	*(.initcall3.init)
+	*(.initcall4.init)
+	*(.initcall5.init)
+	*(.initcall6.init)
+	*(.initcall7.init)
+	__initcall_end = .;
+  }
+
+  .con_initcall.init : {
+    __con_initcall_start = .;
+    *(.con_initcall.init)
+    __con_initcall_end = .;
+  }
+
+  SECURITY_INIT
+
+#ifdef CONFIG_PPC32
+  __start___ftr_fixup = .;
+  __ftr_fixup : { *(__ftr_fixup) }
+  __stop___ftr_fixup = .;
+#else
+  . = ALIGN(PAGE_SIZE);
+  .init.ramfs : {
+    __initramfs_start = .;
+    *(.init.ramfs)
+    __initramfs_end = .;
+  }
+#endif
+
+#ifdef CONFIG_PPC32
+  . = ALIGN(32);
+#endif
+  .data.percpu : {
+    __per_cpu_start = .;
+    *(.data.percpu)
+    __per_cpu_end = .;
+  }
+
+ . = ALIGN(PAGE_SIZE);
+#ifdef CONFIG_PPC64
+ . = ALIGN(16384);
+ __init_end = .;
+ /* freed after init ends here */
+
+ /* Read/write sections */
+ . = ALIGN(PAGE_SIZE);
+ . = ALIGN(16384);
+ _sdata = .;
+ /* The initial task and kernel stack */
+ .data.init_task : {
+      *(.data.init_task)
+      }
+
+ . = ALIGN(PAGE_SIZE);
+ .data.page_aligned : {
+      *(.data.page_aligned)
+      }
+
+ .data.cacheline_aligned : {
+      *(.data.cacheline_aligned)
+      }
+
+ .data : {
+      *(.data .data.rel* .toc1)
+      *(.branch_lt)
+      }
+
+ .opd : {
+      *(.opd)
+      }
+
+ .got : {
+      __toc_start = .;
+      *(.got)
+      *(.toc)
+      . = ALIGN(PAGE_SIZE);
+      _edata = .;
+      }
+
+  . = ALIGN(PAGE_SIZE);
+#else
+  __initramfs_start = .;
+  .init.ramfs : {
+    *(.init.ramfs)
+  }
+  __initramfs_end = .;
+
+  . = ALIGN(4096);
+  __init_end = .;
+
+  . = ALIGN(4096);
+  _sextratext = .;
+  _eextratext = .;
+
+  __bss_start = .;
+#endif
+
+  .bss : {
+    __bss_start = .;
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  __bss_stop = .;
+  }
+
+#ifdef CONFIG_PPC64
+  . = ALIGN(PAGE_SIZE);
+#endif
+  _end = . ;
+#ifdef CONFIG_PPC32
+  PROVIDE (end = .);
+#endif
+}
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
new file mode 100644
index 000000000000..34f5c2e074c9
--- /dev/null
+++ b/arch/powerpc/lib/Makefile
@@ -0,0 +1,20 @@
+#
+# Makefile for ppc-specific library files..
+#
+
+ifeq ($(CONFIG_PPC_MERGE),y)
+obj-y			:= string.o strcase.o
+obj-$(CONFIG_PPC32)	+= div64.o copy_32.o checksum_32.o
+endif
+
+obj-y			+= bitops.o
+obj-$(CONFIG_PPC64)	+= checksum_64.o copypage_64.o copyuser_64.o \
+			   memcpy_64.o usercopy_64.o mem_64.o string.o \
+			   strcase.o
+obj-$(CONFIG_PPC_ISERIES) += e2a.o
+obj-$(CONFIG_XMON)	+= sstep.o
+
+ifeq ($(CONFIG_PPC64),y)
+obj-$(CONFIG_SMP)	+= locks.o
+obj-$(CONFIG_DEBUG_KERNEL) += sstep.o
+endif
diff --git a/arch/ppc64/kernel/bitops.c b/arch/powerpc/lib/bitops.c
index ae329e8b4acb..f68ad71a0187 100644
--- a/arch/ppc64/kernel/bitops.c
+++ b/arch/powerpc/lib/bitops.c
@@ -1,93 +1,97 @@
-/*
- * These are too big to be inlined.
- */
-
-#include <linux/kernel.h>
+#include <linux/types.h>
 #include <linux/module.h>
-#include <linux/bitops.h>
 #include <asm/byteorder.h>
+#include <asm/bitops.h>
 
-unsigned long find_next_zero_bit(const unsigned long *addr, unsigned long size,
-				 unsigned long offset)
+/**
+ * find_next_bit - find the next set bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The maximum size to search
+ */
+unsigned long find_next_bit(const unsigned long *addr, unsigned long size,
+			    unsigned long offset)
 {
-	const unsigned long *p = addr + (offset >> 6);
-	unsigned long result = offset & ~63UL;
+	const unsigned long *p = addr + BITOP_WORD(offset);
+	unsigned long result = offset & ~(BITS_PER_LONG-1);
 	unsigned long tmp;
 
 	if (offset >= size)
 		return size;
 	size -= result;
-	offset &= 63UL;
+	offset %= BITS_PER_LONG;
 	if (offset) {
 		tmp = *(p++);
-		tmp |= ~0UL >> (64 - offset);
-		if (size < 64)
+		tmp &= (~0UL << offset);
+		if (size < BITS_PER_LONG)
 			goto found_first;
-		if (~tmp)
+		if (tmp)
 			goto found_middle;
-		size -= 64;
-		result += 64;
+		size -= BITS_PER_LONG;
+		result += BITS_PER_LONG;
 	}
-	while (size & ~63UL) {
-		if (~(tmp = *(p++)))
+	while (size & ~(BITS_PER_LONG-1)) {
+		if ((tmp = *(p++)))
 			goto found_middle;
-		result += 64;
-		size -= 64;
+		result += BITS_PER_LONG;
+		size -= BITS_PER_LONG;
 	}
 	if (!size)
 		return result;
 	tmp = *p;
 
 found_first:
-	tmp |= ~0UL << size;
-	if (tmp == ~0UL)	/* Are any bits zero? */
+	tmp &= (~0UL >> (BITS_PER_LONG - size));
+	if (tmp == 0UL)		/* Are any bits set? */
 		return result + size;	/* Nope. */
 found_middle:
-	return result + ffz(tmp);
+	return result + __ffs(tmp);
 }
+EXPORT_SYMBOL(find_next_bit);
 
-EXPORT_SYMBOL(find_next_zero_bit);
-
-unsigned long find_next_bit(const unsigned long *addr, unsigned long size,
-			    unsigned long offset)
+/*
+ * This implementation of find_{first,next}_zero_bit was stolen from
+ * Linus' asm-alpha/bitops.h.
+ */
+unsigned long find_next_zero_bit(const unsigned long *addr, unsigned long size,
+				 unsigned long offset)
 {
-	const unsigned long *p = addr + (offset >> 6);
-	unsigned long result = offset & ~63UL;
+	const unsigned long *p = addr + BITOP_WORD(offset);
+	unsigned long result = offset & ~(BITS_PER_LONG-1);
 	unsigned long tmp;
 
 	if (offset >= size)
 		return size;
 	size -= result;
-	offset &= 63UL;
+	offset %= BITS_PER_LONG;
 	if (offset) {
 		tmp = *(p++);
-		tmp &= (~0UL << offset);
-		if (size < 64)
+		tmp |= ~0UL >> (BITS_PER_LONG - offset);
+		if (size < BITS_PER_LONG)
 			goto found_first;
-		if (tmp)
+		if (~tmp)
 			goto found_middle;
-		size -= 64;
-		result += 64;
+		size -= BITS_PER_LONG;
+		result += BITS_PER_LONG;
 	}
-	while (size & ~63UL) {
-		if ((tmp = *(p++)))
+	while (size & ~(BITS_PER_LONG-1)) {
+		if (~(tmp = *(p++)))
 			goto found_middle;
-		result += 64;
-		size -= 64;
+		result += BITS_PER_LONG;
+		size -= BITS_PER_LONG;
 	}
 	if (!size)
 		return result;
 	tmp = *p;
 
 found_first:
-	tmp &= (~0UL >> (64 - size));
-	if (tmp == 0UL)		/* Are any bits set? */
+	tmp |= ~0UL << size;
+	if (tmp == ~0UL)	/* Are any bits zero? */
 		return result + size;	/* Nope. */
 found_middle:
-	return result + __ffs(tmp);
+	return result + ffz(tmp);
 }
-
-EXPORT_SYMBOL(find_next_bit);
+EXPORT_SYMBOL(find_next_zero_bit);
 
 static inline unsigned int ext2_ilog2(unsigned int x)
 {
@@ -106,8 +110,8 @@ static inline unsigned int ext2_ffz(unsigned int x)
 	return rc;
 }
 
-unsigned long find_next_zero_le_bit(const unsigned long *addr, unsigned long size,
-				    unsigned long offset)
+unsigned long find_next_zero_le_bit(const unsigned long *addr,
+				    unsigned long size, unsigned long offset)
 {
 	const unsigned int *p = ((const unsigned int *)addr) + (offset >> 5);
 	unsigned int result = offset & ~31;
@@ -143,5 +147,4 @@ found_first:
 found_middle:
 	return result + ext2_ffz(tmp);
 }
-
 EXPORT_SYMBOL(find_next_zero_le_bit);
diff --git a/arch/powerpc/lib/checksum_32.S b/arch/powerpc/lib/checksum_32.S
new file mode 100644
index 000000000000..7874e8a80455
--- /dev/null
+++ b/arch/powerpc/lib/checksum_32.S
@@ -0,0 +1,225 @@
+/*
+ * This file contains assembly-language implementations
+ * of IP-style 1's complement checksum routines.
+ *	
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ * Severely hacked about by Paul Mackerras (paulus@cs.anu.edu.au).
+ */
+
+#include <linux/sys.h>
+#include <asm/processor.h>
+#include <asm/errno.h>
+#include <asm/ppc_asm.h>
+
+	.text
+
+/*
+ * ip_fast_csum(buf, len) -- Optimized for IP header
+ * len is in words and is always >= 5.
+ */
+_GLOBAL(ip_fast_csum)
+	lwz	r0,0(r3)
+	lwzu	r5,4(r3)
+	addic.	r4,r4,-2
+	addc	r0,r0,r5
+	mtctr	r4
+	blelr-
+1:	lwzu	r4,4(r3)
+	adde	r0,r0,r4
+	bdnz	1b
+	addze	r0,r0		/* add in final carry */
+	rlwinm	r3,r0,16,0,31	/* fold two halves together */
+	add	r3,r0,r3
+	not	r3,r3
+	srwi	r3,r3,16
+	blr
+
+/*
+ * Compute checksum of TCP or UDP pseudo-header:
+ *   csum_tcpudp_magic(saddr, daddr, len, proto, sum)
+ */	
+_GLOBAL(csum_tcpudp_magic)
+	rlwimi	r5,r6,16,0,15	/* put proto in upper half of len */
+	addc	r0,r3,r4	/* add 4 32-bit words together */
+	adde	r0,r0,r5
+	adde	r0,r0,r7
+	addze	r0,r0		/* add in final carry */
+	rlwinm	r3,r0,16,0,31	/* fold two halves together */
+	add	r3,r0,r3
+	not	r3,r3
+	srwi	r3,r3,16
+	blr
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * csum_partial(buff, len, sum)
+ */
+_GLOBAL(csum_partial)
+	addic	r0,r5,0
+	subi	r3,r3,4
+	srwi.	r6,r4,2
+	beq	3f		/* if we're doing < 4 bytes */
+	andi.	r5,r3,2		/* Align buffer to longword boundary */
+	beq+	1f
+	lhz	r5,4(r3)	/* do 2 bytes to get aligned */
+	addi	r3,r3,2
+	subi	r4,r4,2
+	addc	r0,r0,r5
+	srwi.	r6,r4,2		/* # words to do */
+	beq	3f
+1:	mtctr	r6
+2:	lwzu	r5,4(r3)	/* the bdnz has zero overhead, so it should */
+	adde	r0,r0,r5	/* be unnecessary to unroll this loop */
+	bdnz	2b
+	andi.	r4,r4,3
+3:	cmpwi	0,r4,2
+	blt+	4f
+	lhz	r5,4(r3)
+	addi	r3,r3,2
+	subi	r4,r4,2
+	adde	r0,r0,r5
+4:	cmpwi	0,r4,1
+	bne+	5f
+	lbz	r5,4(r3)
+	slwi	r5,r5,8		/* Upper byte of word */
+	adde	r0,r0,r5
+5:	addze	r3,r0		/* add in final carry */
+	blr
+
+/*
+ * Computes the checksum of a memory block at src, length len,
+ * and adds in "sum" (32-bit), while copying the block to dst.
+ * If an access exception occurs on src or dst, it stores -EFAULT
+ * to *src_err or *dst_err respectively, and (for an error on
+ * src) zeroes the rest of dst.
+ *
+ * csum_partial_copy_generic(src, dst, len, sum, src_err, dst_err)
+ */
+_GLOBAL(csum_partial_copy_generic)
+	addic	r0,r6,0
+	subi	r3,r3,4
+	subi	r4,r4,4
+	srwi.	r6,r5,2
+	beq	3f		/* if we're doing < 4 bytes */
+	andi.	r9,r4,2		/* Align dst to longword boundary */
+	beq+	1f
+81:	lhz	r6,4(r3)	/* do 2 bytes to get aligned */
+	addi	r3,r3,2
+	subi	r5,r5,2
+91:	sth	r6,4(r4)
+	addi	r4,r4,2
+	addc	r0,r0,r6
+	srwi.	r6,r5,2		/* # words to do */
+	beq	3f
+1:	srwi.	r6,r5,4		/* # groups of 4 words to do */
+	beq	10f
+	mtctr	r6
+71:	lwz	r6,4(r3)
+72:	lwz	r9,8(r3)
+73:	lwz	r10,12(r3)
+74:	lwzu	r11,16(r3)
+	adde	r0,r0,r6
+75:	stw	r6,4(r4)
+	adde	r0,r0,r9
+76:	stw	r9,8(r4)
+	adde	r0,r0,r10
+77:	stw	r10,12(r4)
+	adde	r0,r0,r11
+78:	stwu	r11,16(r4)
+	bdnz	71b
+10:	rlwinm.	r6,r5,30,30,31	/* # words left to do */
+	beq	13f
+	mtctr	r6
+82:	lwzu	r9,4(r3)
+92:	stwu	r9,4(r4)
+	adde	r0,r0,r9
+	bdnz	82b
+13:	andi.	r5,r5,3
+3:	cmpwi	0,r5,2
+	blt+	4f
+83:	lhz	r6,4(r3)
+	addi	r3,r3,2
+	subi	r5,r5,2
+93:	sth	r6,4(r4)
+	addi	r4,r4,2
+	adde	r0,r0,r6
+4:	cmpwi	0,r5,1
+	bne+	5f
+84:	lbz	r6,4(r3)
+94:	stb	r6,4(r4)
+	slwi	r6,r6,8		/* Upper byte of word */
+	adde	r0,r0,r6
+5:	addze	r3,r0		/* add in final carry */
+	blr
+
+/* These shouldn't go in the fixup section, since that would
+   cause the ex_table addresses to get out of order. */
+
+src_error_4:
+	mfctr	r6		/* update # bytes remaining from ctr */
+	rlwimi	r5,r6,4,0,27
+	b	79f
+src_error_1:
+	li	r6,0
+	subi	r5,r5,2
+95:	sth	r6,4(r4)
+	addi	r4,r4,2
+79:	srwi.	r6,r5,2
+	beq	3f
+	mtctr	r6
+src_error_2:
+	li	r6,0
+96:	stwu	r6,4(r4)
+	bdnz	96b
+3:	andi.	r5,r5,3
+	beq	src_error
+src_error_3:
+	li	r6,0
+	mtctr	r5
+	addi	r4,r4,3
+97:	stbu	r6,1(r4)
+	bdnz	97b
+src_error:
+	cmpwi	0,r7,0
+	beq	1f
+	li	r6,-EFAULT
+	stw	r6,0(r7)
+1:	addze	r3,r0
+	blr
+
+dst_error:
+	cmpwi	0,r8,0
+	beq	1f
+	li	r6,-EFAULT
+	stw	r6,0(r8)
+1:	addze	r3,r0
+	blr
+
+.section __ex_table,"a"
+	.long	81b,src_error_1
+	.long	91b,dst_error
+	.long	71b,src_error_4
+	.long	72b,src_error_4
+	.long	73b,src_error_4
+	.long	74b,src_error_4
+	.long	75b,dst_error
+	.long	76b,dst_error
+	.long	77b,dst_error
+	.long	78b,dst_error
+	.long	82b,src_error_2
+	.long	92b,dst_error
+	.long	83b,src_error_3
+	.long	93b,dst_error
+	.long	84b,src_error_3
+	.long	94b,dst_error
+	.long	95b,dst_error
+	.long	96b,dst_error
+	.long	97b,dst_error
diff --git a/arch/ppc64/lib/checksum.S b/arch/powerpc/lib/checksum_64.S
index ef96c6c58efc..ef96c6c58efc 100644
--- a/arch/ppc64/lib/checksum.S
+++ b/arch/powerpc/lib/checksum_64.S
diff --git a/arch/powerpc/lib/copy_32.S b/arch/powerpc/lib/copy_32.S
new file mode 100644
index 000000000000..bee51414812e
--- /dev/null
+++ b/arch/powerpc/lib/copy_32.S
@@ -0,0 +1,543 @@
+/*
+ * Memory copy functions for 32-bit PowerPC.
+ *
+ * Copyright (C) 1996-2005 Paul Mackerras.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+#include <asm/errno.h>
+#include <asm/ppc_asm.h>
+
+#define COPY_16_BYTES		\
+	lwz	r7,4(r4);	\
+	lwz	r8,8(r4);	\
+	lwz	r9,12(r4);	\
+	lwzu	r10,16(r4);	\
+	stw	r7,4(r6);	\
+	stw	r8,8(r6);	\
+	stw	r9,12(r6);	\
+	stwu	r10,16(r6)
+
+#define COPY_16_BYTES_WITHEX(n)	\
+8 ## n ## 0:			\
+	lwz	r7,4(r4);	\
+8 ## n ## 1:			\
+	lwz	r8,8(r4);	\
+8 ## n ## 2:			\
+	lwz	r9,12(r4);	\
+8 ## n ## 3:			\
+	lwzu	r10,16(r4);	\
+8 ## n ## 4:			\
+	stw	r7,4(r6);	\
+8 ## n ## 5:			\
+	stw	r8,8(r6);	\
+8 ## n ## 6:			\
+	stw	r9,12(r6);	\
+8 ## n ## 7:			\
+	stwu	r10,16(r6)
+
+#define COPY_16_BYTES_EXCODE(n)			\
+9 ## n ## 0:					\
+	addi	r5,r5,-(16 * n);		\
+	b	104f;				\
+9 ## n ## 1:					\
+	addi	r5,r5,-(16 * n);		\
+	b	105f;				\
+.section __ex_table,"a";			\
+	.align	2;				\
+	.long	8 ## n ## 0b,9 ## n ## 0b;	\
+	.long	8 ## n ## 1b,9 ## n ## 0b;	\
+	.long	8 ## n ## 2b,9 ## n ## 0b;	\
+	.long	8 ## n ## 3b,9 ## n ## 0b;	\
+	.long	8 ## n ## 4b,9 ## n ## 1b;	\
+	.long	8 ## n ## 5b,9 ## n ## 1b;	\
+	.long	8 ## n ## 6b,9 ## n ## 1b;	\
+	.long	8 ## n ## 7b,9 ## n ## 1b;	\
+	.text
+
+	.text
+	.stabs	"arch/powerpc/lib/",N_SO,0,0,0f
+	.stabs	"copy32.S",N_SO,0,0,0f
+0:
+
+CACHELINE_BYTES = L1_CACHE_BYTES
+LG_CACHELINE_BYTES = L1_CACHE_SHIFT
+CACHELINE_MASK = (L1_CACHE_BYTES-1)
+
+/*
+ * Use dcbz on the complete cache lines in the destination
+ * to set them to zero.  This requires that the destination
+ * area is cacheable.  -- paulus
+ */
+_GLOBAL(cacheable_memzero)
+	mr	r5,r4
+	li	r4,0
+	addi	r6,r3,-4
+	cmplwi	0,r5,4
+	blt	7f
+	stwu	r4,4(r6)
+	beqlr
+	andi.	r0,r6,3
+	add	r5,r0,r5
+	subf	r6,r0,r6
+	clrlwi	r7,r6,32-LG_CACHELINE_BYTES
+	add	r8,r7,r5
+	srwi	r9,r8,LG_CACHELINE_BYTES
+	addic.	r9,r9,-1	/* total number of complete cachelines */
+	ble	2f
+	xori	r0,r7,CACHELINE_MASK & ~3
+	srwi.	r0,r0,2
+	beq	3f
+	mtctr	r0
+4:	stwu	r4,4(r6)
+	bdnz	4b
+3:	mtctr	r9
+	li	r7,4
+#if !defined(CONFIG_8xx)
+10:	dcbz	r7,r6
+#else
+10:	stw	r4, 4(r6)
+	stw	r4, 8(r6)
+	stw	r4, 12(r6)
+	stw	r4, 16(r6)
+#if CACHE_LINE_SIZE >= 32
+	stw	r4, 20(r6)
+	stw	r4, 24(r6)
+	stw	r4, 28(r6)
+	stw	r4, 32(r6)
+#endif /* CACHE_LINE_SIZE */
+#endif
+	addi	r6,r6,CACHELINE_BYTES
+	bdnz	10b
+	clrlwi	r5,r8,32-LG_CACHELINE_BYTES
+	addi	r5,r5,4
+2:	srwi	r0,r5,2
+	mtctr	r0
+	bdz	6f
+1:	stwu	r4,4(r6)
+	bdnz	1b
+6:	andi.	r5,r5,3
+7:	cmpwi	0,r5,0
+	beqlr
+	mtctr	r5
+	addi	r6,r6,3
+8:	stbu	r4,1(r6)
+	bdnz	8b
+	blr
+
+_GLOBAL(memset)
+	rlwimi	r4,r4,8,16,23
+	rlwimi	r4,r4,16,0,15
+	addi	r6,r3,-4
+	cmplwi	0,r5,4
+	blt	7f
+	stwu	r4,4(r6)
+	beqlr
+	andi.	r0,r6,3
+	add	r5,r0,r5
+	subf	r6,r0,r6
+	srwi	r0,r5,2
+	mtctr	r0
+	bdz	6f
+1:	stwu	r4,4(r6)
+	bdnz	1b
+6:	andi.	r5,r5,3
+7:	cmpwi	0,r5,0
+	beqlr
+	mtctr	r5
+	addi	r6,r6,3
+8:	stbu	r4,1(r6)
+	bdnz	8b
+	blr
+
+/*
+ * This version uses dcbz on the complete cache lines in the
+ * destination area to reduce memory traffic.  This requires that
+ * the destination area is cacheable.
+ * We only use this version if the source and dest don't overlap.
+ * -- paulus.
+ */
+_GLOBAL(cacheable_memcpy)
+	add	r7,r3,r5		/* test if the src & dst overlap */
+	add	r8,r4,r5
+	cmplw	0,r4,r7
+	cmplw	1,r3,r8
+	crand	0,0,4			/* cr0.lt &= cr1.lt */
+	blt	memcpy			/* if regions overlap */
+
+	addi	r4,r4,-4
+	addi	r6,r3,-4
+	neg	r0,r3
+	andi.	r0,r0,CACHELINE_MASK	/* # bytes to start of cache line */
+	beq	58f
+
+	cmplw	0,r5,r0			/* is this more than total to do? */
+	blt	63f			/* if not much to do */
+	andi.	r8,r0,3			/* get it word-aligned first */
+	subf	r5,r0,r5
+	mtctr	r8
+	beq+	61f
+70:	lbz	r9,4(r4)		/* do some bytes */
+	stb	r9,4(r6)
+	addi	r4,r4,1
+	addi	r6,r6,1
+	bdnz	70b
+61:	srwi.	r0,r0,2
+	mtctr	r0
+	beq	58f
+72:	lwzu	r9,4(r4)		/* do some words */
+	stwu	r9,4(r6)
+	bdnz	72b
+
+58:	srwi.	r0,r5,LG_CACHELINE_BYTES /* # complete cachelines */
+	clrlwi	r5,r5,32-LG_CACHELINE_BYTES
+	li	r11,4
+	mtctr	r0
+	beq	63f
+53:
+#if !defined(CONFIG_8xx)
+	dcbz	r11,r6
+#endif
+	COPY_16_BYTES
+#if L1_CACHE_BYTES >= 32
+	COPY_16_BYTES
+#if L1_CACHE_BYTES >= 64
+	COPY_16_BYTES
+	COPY_16_BYTES
+#if L1_CACHE_BYTES >= 128
+	COPY_16_BYTES
+	COPY_16_BYTES
+	COPY_16_BYTES
+	COPY_16_BYTES
+#endif
+#endif
+#endif
+	bdnz	53b
+
+63:	srwi.	r0,r5,2
+	mtctr	r0
+	beq	64f
+30:	lwzu	r0,4(r4)
+	stwu	r0,4(r6)
+	bdnz	30b
+
+64:	andi.	r0,r5,3
+	mtctr	r0
+	beq+	65f
+40:	lbz	r0,4(r4)
+	stb	r0,4(r6)
+	addi	r4,r4,1
+	addi	r6,r6,1
+	bdnz	40b
+65:	blr
+
+_GLOBAL(memmove)
+	cmplw	0,r3,r4
+	bgt	backwards_memcpy
+	/* fall through */
+
+_GLOBAL(memcpy)
+	srwi.	r7,r5,3
+	addi	r6,r3,-4
+	addi	r4,r4,-4
+	beq	2f			/* if less than 8 bytes to do */
+	andi.	r0,r6,3			/* get dest word aligned */
+	mtctr	r7
+	bne	5f
+1:	lwz	r7,4(r4)
+	lwzu	r8,8(r4)
+	stw	r7,4(r6)
+	stwu	r8,8(r6)
+	bdnz	1b
+	andi.	r5,r5,7
+2:	cmplwi	0,r5,4
+	blt	3f
+	lwzu	r0,4(r4)
+	addi	r5,r5,-4
+	stwu	r0,4(r6)
+3:	cmpwi	0,r5,0
+	beqlr
+	mtctr	r5
+	addi	r4,r4,3
+	addi	r6,r6,3
+4:	lbzu	r0,1(r4)
+	stbu	r0,1(r6)
+	bdnz	4b
+	blr
+5:	subfic	r0,r0,4
+	mtctr	r0
+6:	lbz	r7,4(r4)
+	addi	r4,r4,1
+	stb	r7,4(r6)
+	addi	r6,r6,1
+	bdnz	6b
+	subf	r5,r0,r5
+	rlwinm.	r7,r5,32-3,3,31
+	beq	2b
+	mtctr	r7
+	b	1b
+
+_GLOBAL(backwards_memcpy)
+	rlwinm.	r7,r5,32-3,3,31		/* r0 = r5 >> 3 */
+	add	r6,r3,r5
+	add	r4,r4,r5
+	beq	2f
+	andi.	r0,r6,3
+	mtctr	r7
+	bne	5f
+1:	lwz	r7,-4(r4)
+	lwzu	r8,-8(r4)
+	stw	r7,-4(r6)
+	stwu	r8,-8(r6)
+	bdnz	1b
+	andi.	r5,r5,7
+2:	cmplwi	0,r5,4
+	blt	3f
+	lwzu	r0,-4(r4)
+	subi	r5,r5,4
+	stwu	r0,-4(r6)
+3:	cmpwi	0,r5,0
+	beqlr
+	mtctr	r5
+4:	lbzu	r0,-1(r4)
+	stbu	r0,-1(r6)
+	bdnz	4b
+	blr
+5:	mtctr	r0
+6:	lbzu	r7,-1(r4)
+	stbu	r7,-1(r6)
+	bdnz	6b
+	subf	r5,r0,r5
+	rlwinm.	r7,r5,32-3,3,31
+	beq	2b
+	mtctr	r7
+	b	1b
+
+_GLOBAL(__copy_tofrom_user)
+	addi	r4,r4,-4
+	addi	r6,r3,-4
+	neg	r0,r3
+	andi.	r0,r0,CACHELINE_MASK	/* # bytes to start of cache line */
+	beq	58f
+
+	cmplw	0,r5,r0			/* is this more than total to do? */
+	blt	63f			/* if not much to do */
+	andi.	r8,r0,3			/* get it word-aligned first */
+	mtctr	r8
+	beq+	61f
+70:	lbz	r9,4(r4)		/* do some bytes */
+71:	stb	r9,4(r6)
+	addi	r4,r4,1
+	addi	r6,r6,1
+	bdnz	70b
+61:	subf	r5,r0,r5
+	srwi.	r0,r0,2
+	mtctr	r0
+	beq	58f
+72:	lwzu	r9,4(r4)		/* do some words */
+73:	stwu	r9,4(r6)
+	bdnz	72b
+
+	.section __ex_table,"a"
+	.align	2
+	.long	70b,100f
+	.long	71b,101f
+	.long	72b,102f
+	.long	73b,103f
+	.text
+
+58:	srwi.	r0,r5,LG_CACHELINE_BYTES /* # complete cachelines */
+	clrlwi	r5,r5,32-LG_CACHELINE_BYTES
+	li	r11,4
+	beq	63f
+
+#ifdef CONFIG_8xx
+	/* Don't use prefetch on 8xx */
+	mtctr	r0
+	li	r0,0
+53:	COPY_16_BYTES_WITHEX(0)
+	bdnz	53b
+
+#else /* not CONFIG_8xx */
+	/* Here we decide how far ahead to prefetch the source */
+	li	r3,4
+	cmpwi	r0,1
+	li	r7,0
+	ble	114f
+	li	r7,1
+#if MAX_COPY_PREFETCH > 1
+	/* Heuristically, for large transfers we prefetch
+	   MAX_COPY_PREFETCH cachelines ahead.  For small transfers
+	   we prefetch 1 cacheline ahead. */
+	cmpwi	r0,MAX_COPY_PREFETCH
+	ble	112f
+	li	r7,MAX_COPY_PREFETCH
+112:	mtctr	r7
+111:	dcbt	r3,r4
+	addi	r3,r3,CACHELINE_BYTES
+	bdnz	111b
+#else
+	dcbt	r3,r4
+	addi	r3,r3,CACHELINE_BYTES
+#endif /* MAX_COPY_PREFETCH > 1 */
+
+114:	subf	r8,r7,r0
+	mr	r0,r7
+	mtctr	r8
+
+53:	dcbt	r3,r4
+54:	dcbz	r11,r6
+	.section __ex_table,"a"
+	.align	2
+	.long	54b,105f
+	.text
+/* the main body of the cacheline loop */
+	COPY_16_BYTES_WITHEX(0)
+#if L1_CACHE_BYTES >= 32
+	COPY_16_BYTES_WITHEX(1)
+#if L1_CACHE_BYTES >= 64
+	COPY_16_BYTES_WITHEX(2)
+	COPY_16_BYTES_WITHEX(3)
+#if L1_CACHE_BYTES >= 128
+	COPY_16_BYTES_WITHEX(4)
+	COPY_16_BYTES_WITHEX(5)
+	COPY_16_BYTES_WITHEX(6)
+	COPY_16_BYTES_WITHEX(7)
+#endif
+#endif
+#endif
+	bdnz	53b
+	cmpwi	r0,0
+	li	r3,4
+	li	r7,0
+	bne	114b
+#endif /* CONFIG_8xx */
+
+63:	srwi.	r0,r5,2
+	mtctr	r0
+	beq	64f
+30:	lwzu	r0,4(r4)
+31:	stwu	r0,4(r6)
+	bdnz	30b
+
+64:	andi.	r0,r5,3
+	mtctr	r0
+	beq+	65f
+40:	lbz	r0,4(r4)
+41:	stb	r0,4(r6)
+	addi	r4,r4,1
+	addi	r6,r6,1
+	bdnz	40b
+65:	li	r3,0
+	blr
+
+/* read fault, initial single-byte copy */
+100:	li	r9,0
+	b	90f
+/* write fault, initial single-byte copy */
+101:	li	r9,1
+90:	subf	r5,r8,r5
+	li	r3,0
+	b	99f
+/* read fault, initial word copy */
+102:	li	r9,0
+	b	91f
+/* write fault, initial word copy */
+103:	li	r9,1
+91:	li	r3,2
+	b	99f
+
+/*
+ * this stuff handles faults in the cacheline loop and branches to either
+ * 104f (if in read part) or 105f (if in write part), after updating r5
+ */
+	COPY_16_BYTES_EXCODE(0)
+#if L1_CACHE_BYTES >= 32
+	COPY_16_BYTES_EXCODE(1)
+#if L1_CACHE_BYTES >= 64
+	COPY_16_BYTES_EXCODE(2)
+	COPY_16_BYTES_EXCODE(3)
+#if L1_CACHE_BYTES >= 128
+	COPY_16_BYTES_EXCODE(4)
+	COPY_16_BYTES_EXCODE(5)
+	COPY_16_BYTES_EXCODE(6)
+	COPY_16_BYTES_EXCODE(7)
+#endif
+#endif
+#endif
+
+/* read fault in cacheline loop */
+104:	li	r9,0
+	b	92f
+/* fault on dcbz (effectively a write fault) */
+/* or write fault in cacheline loop */
+105:	li	r9,1
+92:	li	r3,LG_CACHELINE_BYTES
+	mfctr	r8
+	add	r0,r0,r8
+	b	106f
+/* read fault in final word loop */
+108:	li	r9,0
+	b	93f
+/* write fault in final word loop */
+109:	li	r9,1
+93:	andi.	r5,r5,3
+	li	r3,2
+	b	99f
+/* read fault in final byte loop */
+110:	li	r9,0
+	b	94f
+/* write fault in final byte loop */
+111:	li	r9,1
+94:	li	r5,0
+	li	r3,0
+/*
+ * At this stage the number of bytes not copied is
+ * r5 + (ctr << r3), and r9 is 0 for read or 1 for write.
+ */
+99:	mfctr	r0
+106:	slw	r3,r0,r3
+	add.	r3,r3,r5
+	beq	120f			/* shouldn't happen */
+	cmpwi	0,r9,0
+	bne	120f
+/* for a read fault, first try to continue the copy one byte at a time */
+	mtctr	r3
+130:	lbz	r0,4(r4)
+131:	stb	r0,4(r6)
+	addi	r4,r4,1
+	addi	r6,r6,1
+	bdnz	130b
+/* then clear out the destination: r3 bytes starting at 4(r6) */
+132:	mfctr	r3
+	srwi.	r0,r3,2
+	li	r9,0
+	mtctr	r0
+	beq	113f
+112:	stwu	r9,4(r6)
+	bdnz	112b
+113:	andi.	r0,r3,3
+	mtctr	r0
+	beq	120f
+114:	stb	r9,4(r6)
+	addi	r6,r6,1
+	bdnz	114b
+120:	blr
+
+	.section __ex_table,"a"
+	.align	2
+	.long	30b,108b
+	.long	31b,109b
+	.long	40b,110b
+	.long	41b,111b
+	.long	130b,132b
+	.long	131b,120b
+	.long	112b,120b
+	.long	114b,120b
+	.text
diff --git a/arch/ppc64/lib/copypage.S b/arch/powerpc/lib/copypage_64.S
index 733d61618bbf..40523b140109 100644
--- a/arch/ppc64/lib/copypage.S
+++ b/arch/powerpc/lib/copypage_64.S
@@ -11,7 +11,7 @@
 #include <asm/processor.h>
 #include <asm/ppc_asm.h>
 
-_GLOBAL(copy_page)
+_GLOBAL(copy_4K_page)
 	std	r31,-8(1)
 	std	r30,-16(1)
 	std	r29,-24(1)
diff --git a/arch/ppc64/lib/copyuser.S b/arch/powerpc/lib/copyuser_64.S
index a0b3fbbd6fb1..6d69ef39b7df 100644
--- a/arch/ppc64/lib/copyuser.S
+++ b/arch/powerpc/lib/copyuser_64.S
@@ -24,7 +24,7 @@ _GLOBAL(__copy_tofrom_user)
 	std	r4,-16(r1)
 	std	r5,-8(r1)
 	dcbt	0,r4
-	beq	.Lcopy_page
+	beq	.Lcopy_page_4K
 	andi.	r6,r6,7
 	mtcrf	0x01,r5
 	blt	cr1,.Lshort_copy
@@ -366,7 +366,7 @@ _GLOBAL(__copy_tofrom_user)
  * above (following the .Ldst_aligned label) but it runs slightly
  * slower on POWER3.
  */
-.Lcopy_page:
+.Lcopy_page_4K:
 	std	r31,-32(1)
 	std	r30,-40(1)
 	std	r29,-48(1)
diff --git a/arch/powerpc/lib/div64.S b/arch/powerpc/lib/div64.S
new file mode 100644
index 000000000000..83d9832fd919
--- /dev/null
+++ b/arch/powerpc/lib/div64.S
@@ -0,0 +1,59 @@
+/*
+ * Divide a 64-bit unsigned number by a 32-bit unsigned number.
+ * This routine assumes that the top 32 bits of the dividend are
+ * non-zero to start with.
+ * On entry, r3 points to the dividend, which get overwritten with
+ * the 64-bit quotient, and r4 contains the divisor.
+ * On exit, r3 contains the remainder.
+ *
+ * Copyright (C) 2002 Paul Mackerras, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <asm/ppc_asm.h>
+#include <asm/processor.h>
+
+_GLOBAL(__div64_32)
+	lwz	r5,0(r3)	# get the dividend into r5/r6
+	lwz	r6,4(r3)
+	cmplw	r5,r4
+	li	r7,0
+	li	r8,0
+	blt	1f
+	divwu	r7,r5,r4	# if dividend.hi >= divisor,
+	mullw	r0,r7,r4	# quotient.hi = dividend.hi / divisor
+	subf.	r5,r0,r5	# dividend.hi %= divisor
+	beq	3f
+1:	mr	r11,r5		# here dividend.hi != 0
+	andis.	r0,r5,0xc000
+	bne	2f
+	cntlzw	r0,r5		# we are shifting the dividend right
+	li	r10,-1		# to make it < 2^32, and shifting
+	srw	r10,r10,r0	# the divisor right the same amount,
+	addc	r9,r4,r10	# rounding up (so the estimate cannot
+	andc	r11,r6,r10	# ever be too large, only too small)
+	andc	r9,r9,r10
+	addze	r9,r9
+	or	r11,r5,r11
+	rotlw	r9,r9,r0
+	rotlw	r11,r11,r0
+	divwu	r11,r11,r9	# then we divide the shifted quantities
+2:	mullw	r10,r11,r4	# to get an estimate of the quotient,
+	mulhwu	r9,r11,r4	# multiply the estimate by the divisor,
+	subfc	r6,r10,r6	# take the product from the divisor,
+	add	r8,r8,r11	# and add the estimate to the accumulated
+	subfe.	r5,r9,r5	# quotient
+	bne	1b
+3:	cmplw	r6,r4
+	blt	4f
+	divwu	r0,r6,r4	# perform the remaining 32-bit division
+	mullw	r10,r0,r4	# and get the remainder
+	add	r8,r8,r0
+	subf	r6,r10,r6
+4:	stw	r7,0(r3)	# return the quotient in *r3
+	stw	r8,4(r3)
+	mr	r3,r6		# return the remainder in r3
+	blr
diff --git a/arch/ppc64/lib/e2a.c b/arch/powerpc/lib/e2a.c
index d2b834887920..d2b834887920 100644
--- a/arch/ppc64/lib/e2a.c
+++ b/arch/powerpc/lib/e2a.c
diff --git a/arch/ppc64/lib/locks.c b/arch/powerpc/lib/locks.c
index 033643ab69e0..35bd03c41dd1 100644
--- a/arch/ppc64/lib/locks.c
+++ b/arch/powerpc/lib/locks.c
@@ -17,11 +17,13 @@
 #include <linux/spinlock.h>
 #include <linux/module.h>
 #include <linux/stringify.h>
-#include <asm/hvcall.h>
-#include <asm/iSeries/HvCall.h>
+#include <linux/smp.h>
 
 /* waiting for a spinlock... */
 #if defined(CONFIG_PPC_SPLPAR) || defined(CONFIG_PPC_ISERIES)
+#include <asm/hvcall.h>
+#include <asm/iseries/hv_call.h>
+#include <asm/smp.h>
 
 void __spin_yield(raw_spinlock_t *lock)
 {
diff --git a/arch/powerpc/lib/mem_64.S b/arch/powerpc/lib/mem_64.S
new file mode 100644
index 000000000000..68df20283ff5
--- /dev/null
+++ b/arch/powerpc/lib/mem_64.S
@@ -0,0 +1,119 @@
+/*
+ * String handling functions for PowerPC.
+ *
+ * Copyright (C) 1996 Paul Mackerras.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <asm/processor.h>
+#include <asm/errno.h>
+#include <asm/ppc_asm.h>
+
+_GLOBAL(memset)
+	neg	r0,r3
+	rlwimi	r4,r4,8,16,23
+	andi.	r0,r0,7			/* # bytes to be 8-byte aligned */
+	rlwimi	r4,r4,16,0,15
+	cmplw	cr1,r5,r0		/* do we get that far? */
+	rldimi	r4,r4,32,0
+	mtcrf	1,r0
+	mr	r6,r3
+	blt	cr1,8f
+	beq+	3f			/* if already 8-byte aligned */
+	subf	r5,r0,r5
+	bf	31,1f
+	stb	r4,0(r6)
+	addi	r6,r6,1
+1:	bf	30,2f
+	sth	r4,0(r6)
+	addi	r6,r6,2
+2:	bf	29,3f
+	stw	r4,0(r6)
+	addi	r6,r6,4
+3:	srdi.	r0,r5,6
+	clrldi	r5,r5,58
+	mtctr	r0
+	beq	5f
+4:	std	r4,0(r6)
+	std	r4,8(r6)
+	std	r4,16(r6)
+	std	r4,24(r6)
+	std	r4,32(r6)
+	std	r4,40(r6)
+	std	r4,48(r6)
+	std	r4,56(r6)
+	addi	r6,r6,64
+	bdnz	4b
+5:	srwi.	r0,r5,3
+	clrlwi	r5,r5,29
+	mtcrf	1,r0
+	beq	8f
+	bf	29,6f
+	std	r4,0(r6)
+	std	r4,8(r6)
+	std	r4,16(r6)
+	std	r4,24(r6)
+	addi	r6,r6,32
+6:	bf	30,7f
+	std	r4,0(r6)
+	std	r4,8(r6)
+	addi	r6,r6,16
+7:	bf	31,8f
+	std	r4,0(r6)
+	addi	r6,r6,8
+8:	cmpwi	r5,0
+	mtcrf	1,r5
+	beqlr+
+	bf	29,9f
+	stw	r4,0(r6)
+	addi	r6,r6,4
+9:	bf	30,10f
+	sth	r4,0(r6)
+	addi	r6,r6,2
+10:	bflr	31
+	stb	r4,0(r6)
+	blr
+
+_GLOBAL(memmove)
+	cmplw	0,r3,r4
+	bgt	.backwards_memcpy
+	b	.memcpy
+
+_GLOBAL(backwards_memcpy)
+	rlwinm.	r7,r5,32-3,3,31		/* r0 = r5 >> 3 */
+	add	r6,r3,r5
+	add	r4,r4,r5
+	beq	2f
+	andi.	r0,r6,3
+	mtctr	r7
+	bne	5f
+1:	lwz	r7,-4(r4)
+	lwzu	r8,-8(r4)
+	stw	r7,-4(r6)
+	stwu	r8,-8(r6)
+	bdnz	1b
+	andi.	r5,r5,7
+2:	cmplwi	0,r5,4
+	blt	3f
+	lwzu	r0,-4(r4)
+	subi	r5,r5,4
+	stwu	r0,-4(r6)
+3:	cmpwi	0,r5,0
+	beqlr
+	mtctr	r5
+4:	lbzu	r0,-1(r4)
+	stbu	r0,-1(r6)
+	bdnz	4b
+	blr
+5:	mtctr	r0
+6:	lbzu	r7,-1(r4)
+	stbu	r7,-1(r6)
+	bdnz	6b
+	subf	r5,r0,r5
+	rlwinm.	r7,r5,32-3,3,31
+	beq	2b
+	mtctr	r7
+	b	1b
diff --git a/arch/ppc64/lib/memcpy.S b/arch/powerpc/lib/memcpy_64.S
index 9ccacdf5bcb9..9ccacdf5bcb9 100644
--- a/arch/ppc64/lib/memcpy.S
+++ b/arch/powerpc/lib/memcpy_64.S
diff --git a/arch/powerpc/lib/rheap.c b/arch/powerpc/lib/rheap.c
new file mode 100644
index 000000000000..42c5de2c898f
--- /dev/null
+++ b/arch/powerpc/lib/rheap.c
@@ -0,0 +1,693 @@
+/*
+ * arch/ppc/syslib/rheap.c
+ *
+ * A Remote Heap.  Remote means that we don't touch the memory that the
+ * heap points to. Normal heap implementations use the memory they manage
+ * to place their list. We cannot do that because the memory we manage may
+ * have special properties, for example it is uncachable or of different
+ * endianess.
+ *
+ * Author: Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2004 (c) INTRACOM S.A. Greece. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+
+#include <asm/rheap.h>
+
+/*
+ * Fixup a list_head, needed when copying lists.  If the pointers fall
+ * between s and e, apply the delta.  This assumes that
+ * sizeof(struct list_head *) == sizeof(unsigned long *).
+ */
+static inline void fixup(unsigned long s, unsigned long e, int d,
+			 struct list_head *l)
+{
+	unsigned long *pp;
+
+	pp = (unsigned long *)&l->next;
+	if (*pp >= s && *pp < e)
+		*pp += d;
+
+	pp = (unsigned long *)&l->prev;
+	if (*pp >= s && *pp < e)
+		*pp += d;
+}
+
+/* Grow the allocated blocks */
+static int grow(rh_info_t * info, int max_blocks)
+{
+	rh_block_t *block, *blk;
+	int i, new_blocks;
+	int delta;
+	unsigned long blks, blke;
+
+	if (max_blocks <= info->max_blocks)
+		return -EINVAL;
+
+	new_blocks = max_blocks - info->max_blocks;
+
+	block = kmalloc(sizeof(rh_block_t) * max_blocks, GFP_KERNEL);
+	if (block == NULL)
+		return -ENOMEM;
+
+	if (info->max_blocks > 0) {
+
+		/* copy old block area */
+		memcpy(block, info->block,
+		       sizeof(rh_block_t) * info->max_blocks);
+
+		delta = (char *)block - (char *)info->block;
+
+		/* and fixup list pointers */
+		blks = (unsigned long)info->block;
+		blke = (unsigned long)(info->block + info->max_blocks);
+
+		for (i = 0, blk = block; i < info->max_blocks; i++, blk++)
+			fixup(blks, blke, delta, &blk->list);
+
+		fixup(blks, blke, delta, &info->empty_list);
+		fixup(blks, blke, delta, &info->free_list);
+		fixup(blks, blke, delta, &info->taken_list);
+
+		/* free the old allocated memory */
+		if ((info->flags & RHIF_STATIC_BLOCK) == 0)
+			kfree(info->block);
+	}
+
+	info->block = block;
+	info->empty_slots += new_blocks;
+	info->max_blocks = max_blocks;
+	info->flags &= ~RHIF_STATIC_BLOCK;
+
+	/* add all new blocks to the free list */
+	for (i = 0, blk = block + info->max_blocks; i < new_blocks; i++, blk++)
+		list_add(&blk->list, &info->empty_list);
+
+	return 0;
+}
+
+/*
+ * Assure at least the required amount of empty slots.  If this function
+ * causes a grow in the block area then all pointers kept to the block
+ * area are invalid!
+ */
+static int assure_empty(rh_info_t * info, int slots)
+{
+	int max_blocks;
+
+	/* This function is not meant to be used to grow uncontrollably */
+	if (slots >= 4)
+		return -EINVAL;
+
+	/* Enough space */
+	if (info->empty_slots >= slots)
+		return 0;
+
+	/* Next 16 sized block */
+	max_blocks = ((info->max_blocks + slots) + 15) & ~15;
+
+	return grow(info, max_blocks);
+}
+
+static rh_block_t *get_slot(rh_info_t * info)
+{
+	rh_block_t *blk;
+
+	/* If no more free slots, and failure to extend. */
+	/* XXX: You should have called assure_empty before */
+	if (info->empty_slots == 0) {
+		printk(KERN_ERR "rh: out of slots; crash is imminent.\n");
+		return NULL;
+	}
+
+	/* Get empty slot to use */
+	blk = list_entry(info->empty_list.next, rh_block_t, list);
+	list_del_init(&blk->list);
+	info->empty_slots--;
+
+	/* Initialize */
+	blk->start = NULL;
+	blk->size = 0;
+	blk->owner = NULL;
+
+	return blk;
+}
+
+static inline void release_slot(rh_info_t * info, rh_block_t * blk)
+{
+	list_add(&blk->list, &info->empty_list);
+	info->empty_slots++;
+}
+
+static void attach_free_block(rh_info_t * info, rh_block_t * blkn)
+{
+	rh_block_t *blk;
+	rh_block_t *before;
+	rh_block_t *after;
+	rh_block_t *next;
+	int size;
+	unsigned long s, e, bs, be;
+	struct list_head *l;
+
+	/* We assume that they are aligned properly */
+	size = blkn->size;
+	s = (unsigned long)blkn->start;
+	e = s + size;
+
+	/* Find the blocks immediately before and after the given one
+	 * (if any) */
+	before = NULL;
+	after = NULL;
+	next = NULL;
+
+	list_for_each(l, &info->free_list) {
+		blk = list_entry(l, rh_block_t, list);
+
+		bs = (unsigned long)blk->start;
+		be = bs + blk->size;
+
+		if (next == NULL && s >= bs)
+			next = blk;
+
+		if (be == s)
+			before = blk;
+
+		if (e == bs)
+			after = blk;
+
+		/* If both are not null, break now */
+		if (before != NULL && after != NULL)
+			break;
+	}
+
+	/* Now check if they are really adjacent */
+	if (before != NULL && s != (unsigned long)before->start + before->size)
+		before = NULL;
+
+	if (after != NULL && e != (unsigned long)after->start)
+		after = NULL;
+
+	/* No coalescing; list insert and return */
+	if (before == NULL && after == NULL) {
+
+		if (next != NULL)
+			list_add(&blkn->list, &next->list);
+		else
+			list_add(&blkn->list, &info->free_list);
+
+		return;
+	}
+
+	/* We don't need it anymore */
+	release_slot(info, blkn);
+
+	/* Grow the before block */
+	if (before != NULL && after == NULL) {
+		before->size += size;
+		return;
+	}
+
+	/* Grow the after block backwards */
+	if (before == NULL && after != NULL) {
+		after->start = (int8_t *)after->start - size;
+		after->size += size;
+		return;
+	}
+
+	/* Grow the before block, and release the after block */
+	before->size += size + after->size;
+	list_del(&after->list);
+	release_slot(info, after);
+}
+
+static void attach_taken_block(rh_info_t * info, rh_block_t * blkn)
+{
+	rh_block_t *blk;
+	struct list_head *l;
+
+	/* Find the block immediately before the given one (if any) */
+	list_for_each(l, &info->taken_list) {
+		blk = list_entry(l, rh_block_t, list);
+		if (blk->start > blkn->start) {
+			list_add_tail(&blkn->list, &blk->list);
+			return;
+		}
+	}
+
+	list_add_tail(&blkn->list, &info->taken_list);
+}
+
+/*
+ * Create a remote heap dynamically.  Note that no memory for the blocks
+ * are allocated.  It will upon the first allocation
+ */
+rh_info_t *rh_create(unsigned int alignment)
+{
+	rh_info_t *info;
+
+	/* Alignment must be a power of two */
+	if ((alignment & (alignment - 1)) != 0)
+		return ERR_PTR(-EINVAL);
+
+	info = kmalloc(sizeof(*info), GFP_KERNEL);
+	if (info == NULL)
+		return ERR_PTR(-ENOMEM);
+
+	info->alignment = alignment;
+
+	/* Initially everything as empty */
+	info->block = NULL;
+	info->max_blocks = 0;
+	info->empty_slots = 0;
+	info->flags = 0;
+
+	INIT_LIST_HEAD(&info->empty_list);
+	INIT_LIST_HEAD(&info->free_list);
+	INIT_LIST_HEAD(&info->taken_list);
+
+	return info;
+}
+
+/*
+ * Destroy a dynamically created remote heap.  Deallocate only if the areas
+ * are not static
+ */
+void rh_destroy(rh_info_t * info)
+{
+	if ((info->flags & RHIF_STATIC_BLOCK) == 0 && info->block != NULL)
+		kfree(info->block);
+
+	if ((info->flags & RHIF_STATIC_INFO) == 0)
+		kfree(info);
+}
+
+/*
+ * Initialize in place a remote heap info block.  This is needed to support
+ * operation very early in the startup of the kernel, when it is not yet safe
+ * to call kmalloc.
+ */
+void rh_init(rh_info_t * info, unsigned int alignment, int max_blocks,
+	     rh_block_t * block)
+{
+	int i;
+	rh_block_t *blk;
+
+	/* Alignment must be a power of two */
+	if ((alignment & (alignment - 1)) != 0)
+		return;
+
+	info->alignment = alignment;
+
+	/* Initially everything as empty */
+	info->block = block;
+	info->max_blocks = max_blocks;
+	info->empty_slots = max_blocks;
+	info->flags = RHIF_STATIC_INFO | RHIF_STATIC_BLOCK;
+
+	INIT_LIST_HEAD(&info->empty_list);
+	INIT_LIST_HEAD(&info->free_list);
+	INIT_LIST_HEAD(&info->taken_list);
+
+	/* Add all new blocks to the free list */
+	for (i = 0, blk = block; i < max_blocks; i++, blk++)
+		list_add(&blk->list, &info->empty_list);
+}
+
+/* Attach a free memory region, coalesces regions if adjuscent */
+int rh_attach_region(rh_info_t * info, void *start, int size)
+{
+	rh_block_t *blk;
+	unsigned long s, e, m;
+	int r;
+
+	/* The region must be aligned */
+	s = (unsigned long)start;
+	e = s + size;
+	m = info->alignment - 1;
+
+	/* Round start up */
+	s = (s + m) & ~m;
+
+	/* Round end down */
+	e = e & ~m;
+
+	/* Take final values */
+	start = (void *)s;
+	size = (int)(e - s);
+
+	/* Grow the blocks, if needed */
+	r = assure_empty(info, 1);
+	if (r < 0)
+		return r;
+
+	blk = get_slot(info);
+	blk->start = start;
+	blk->size = size;
+	blk->owner = NULL;
+
+	attach_free_block(info, blk);
+
+	return 0;
+}
+
+/* Detatch given address range, splits free block if needed. */
+void *rh_detach_region(rh_info_t * info, void *start, int size)
+{
+	struct list_head *l;
+	rh_block_t *blk, *newblk;
+	unsigned long s, e, m, bs, be;
+
+	/* Validate size */
+	if (size <= 0)
+		return ERR_PTR(-EINVAL);
+
+	/* The region must be aligned */
+	s = (unsigned long)start;
+	e = s + size;
+	m = info->alignment - 1;
+
+	/* Round start up */
+	s = (s + m) & ~m;
+
+	/* Round end down */
+	e = e & ~m;
+
+	if (assure_empty(info, 1) < 0)
+		return ERR_PTR(-ENOMEM);
+
+	blk = NULL;
+	list_for_each(l, &info->free_list) {
+		blk = list_entry(l, rh_block_t, list);
+		/* The range must lie entirely inside one free block */
+		bs = (unsigned long)blk->start;
+		be = (unsigned long)blk->start + blk->size;
+		if (s >= bs && e <= be)
+			break;
+		blk = NULL;
+	}
+
+	if (blk == NULL)
+		return ERR_PTR(-ENOMEM);
+
+	/* Perfect fit */
+	if (bs == s && be == e) {
+		/* Delete from free list, release slot */
+		list_del(&blk->list);
+		release_slot(info, blk);
+		return (void *)s;
+	}
+
+	/* blk still in free list, with updated start and/or size */
+	if (bs == s || be == e) {
+		if (bs == s)
+			blk->start = (int8_t *)blk->start + size;
+		blk->size -= size;
+
+	} else {
+		/* The front free fragment */
+		blk->size = s - bs;
+
+		/* the back free fragment */
+		newblk = get_slot(info);
+		newblk->start = (void *)e;
+		newblk->size = be - e;
+
+		list_add(&newblk->list, &blk->list);
+	}
+
+	return (void *)s;
+}
+
+void *rh_alloc(rh_info_t * info, int size, const char *owner)
+{
+	struct list_head *l;
+	rh_block_t *blk;
+	rh_block_t *newblk;
+	void *start;
+
+	/* Validate size */
+	if (size <= 0)
+		return ERR_PTR(-EINVAL);
+
+	/* Align to configured alignment */
+	size = (size + (info->alignment - 1)) & ~(info->alignment - 1);
+
+	if (assure_empty(info, 1) < 0)
+		return ERR_PTR(-ENOMEM);
+
+	blk = NULL;
+	list_for_each(l, &info->free_list) {
+		blk = list_entry(l, rh_block_t, list);
+		if (size <= blk->size)
+			break;
+		blk = NULL;
+	}
+
+	if (blk == NULL)
+		return ERR_PTR(-ENOMEM);
+
+	/* Just fits */
+	if (blk->size == size) {
+		/* Move from free list to taken list */
+		list_del(&blk->list);
+		blk->owner = owner;
+		start = blk->start;
+
+		attach_taken_block(info, blk);
+
+		return start;
+	}
+
+	newblk = get_slot(info);
+	newblk->start = blk->start;
+	newblk->size = size;
+	newblk->owner = owner;
+
+	/* blk still in free list, with updated start, size */
+	blk->start = (int8_t *)blk->start + size;
+	blk->size -= size;
+
+	start = newblk->start;
+
+	attach_taken_block(info, newblk);
+
+	return start;
+}
+
+/* allocate at precisely the given address */
+void *rh_alloc_fixed(rh_info_t * info, void *start, int size, const char *owner)
+{
+	struct list_head *l;
+	rh_block_t *blk, *newblk1, *newblk2;
+	unsigned long s, e, m, bs, be;
+
+	/* Validate size */
+	if (size <= 0)
+		return ERR_PTR(-EINVAL);
+
+	/* The region must be aligned */
+	s = (unsigned long)start;
+	e = s + size;
+	m = info->alignment - 1;
+
+	/* Round start up */
+	s = (s + m) & ~m;
+
+	/* Round end down */
+	e = e & ~m;
+
+	if (assure_empty(info, 2) < 0)
+		return ERR_PTR(-ENOMEM);
+
+	blk = NULL;
+	list_for_each(l, &info->free_list) {
+		blk = list_entry(l, rh_block_t, list);
+		/* The range must lie entirely inside one free block */
+		bs = (unsigned long)blk->start;
+		be = (unsigned long)blk->start + blk->size;
+		if (s >= bs && e <= be)
+			break;
+	}
+
+	if (blk == NULL)
+		return ERR_PTR(-ENOMEM);
+
+	/* Perfect fit */
+	if (bs == s && be == e) {
+		/* Move from free list to taken list */
+		list_del(&blk->list);
+		blk->owner = owner;
+
+		start = blk->start;
+		attach_taken_block(info, blk);
+
+		return start;
+
+	}
+
+	/* blk still in free list, with updated start and/or size */
+	if (bs == s || be == e) {
+		if (bs == s)
+			blk->start = (int8_t *)blk->start + size;
+		blk->size -= size;
+
+	} else {
+		/* The front free fragment */
+		blk->size = s - bs;
+
+		/* The back free fragment */
+		newblk2 = get_slot(info);
+		newblk2->start = (void *)e;
+		newblk2->size = be - e;
+
+		list_add(&newblk2->list, &blk->list);
+	}
+
+	newblk1 = get_slot(info);
+	newblk1->start = (void *)s;
+	newblk1->size = e - s;
+	newblk1->owner = owner;
+
+	start = newblk1->start;
+	attach_taken_block(info, newblk1);
+
+	return start;
+}
+
+int rh_free(rh_info_t * info, void *start)
+{
+	rh_block_t *blk, *blk2;
+	struct list_head *l;
+	int size;
+
+	/* Linear search for block */
+	blk = NULL;
+	list_for_each(l, &info->taken_list) {
+		blk2 = list_entry(l, rh_block_t, list);
+		if (start < blk2->start)
+			break;
+		blk = blk2;
+	}
+
+	if (blk == NULL || start > (blk->start + blk->size))
+		return -EINVAL;
+
+	/* Remove from taken list */
+	list_del(&blk->list);
+
+	/* Get size of freed block */
+	size = blk->size;
+	attach_free_block(info, blk);
+
+	return size;
+}
+
+int rh_get_stats(rh_info_t * info, int what, int max_stats, rh_stats_t * stats)
+{
+	rh_block_t *blk;
+	struct list_head *l;
+	struct list_head *h;
+	int nr;
+
+	switch (what) {
+
+	case RHGS_FREE:
+		h = &info->free_list;
+		break;
+
+	case RHGS_TAKEN:
+		h = &info->taken_list;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	/* Linear search for block */
+	nr = 0;
+	list_for_each(l, h) {
+		blk = list_entry(l, rh_block_t, list);
+		if (stats != NULL && nr < max_stats) {
+			stats->start = blk->start;
+			stats->size = blk->size;
+			stats->owner = blk->owner;
+			stats++;
+		}
+		nr++;
+	}
+
+	return nr;
+}
+
+int rh_set_owner(rh_info_t * info, void *start, const char *owner)
+{
+	rh_block_t *blk, *blk2;
+	struct list_head *l;
+	int size;
+
+	/* Linear search for block */
+	blk = NULL;
+	list_for_each(l, &info->taken_list) {
+		blk2 = list_entry(l, rh_block_t, list);
+		if (start < blk2->start)
+			break;
+		blk = blk2;
+	}
+
+	if (blk == NULL || start > (blk->start + blk->size))
+		return -EINVAL;
+
+	blk->owner = owner;
+	size = blk->size;
+
+	return size;
+}
+
+void rh_dump(rh_info_t * info)
+{
+	static rh_stats_t st[32];	/* XXX maximum 32 blocks */
+	int maxnr;
+	int i, nr;
+
+	maxnr = sizeof(st) / sizeof(st[0]);
+
+	printk(KERN_INFO
+	       "info @0x%p (%d slots empty / %d max)\n",
+	       info, info->empty_slots, info->max_blocks);
+
+	printk(KERN_INFO "  Free:\n");
+	nr = rh_get_stats(info, RHGS_FREE, maxnr, st);
+	if (nr > maxnr)
+		nr = maxnr;
+	for (i = 0; i < nr; i++)
+		printk(KERN_INFO
+		       "    0x%p-0x%p (%u)\n",
+		       st[i].start, (int8_t *) st[i].start + st[i].size,
+		       st[i].size);
+	printk(KERN_INFO "\n");
+
+	printk(KERN_INFO "  Taken:\n");
+	nr = rh_get_stats(info, RHGS_TAKEN, maxnr, st);
+	if (nr > maxnr)
+		nr = maxnr;
+	for (i = 0; i < nr; i++)
+		printk(KERN_INFO
+		       "    0x%p-0x%p (%u) %s\n",
+		       st[i].start, (int8_t *) st[i].start + st[i].size,
+		       st[i].size, st[i].owner != NULL ? st[i].owner : "");
+	printk(KERN_INFO "\n");
+}
+
+void rh_dump_blk(rh_info_t * info, rh_block_t * blk)
+{
+	printk(KERN_INFO
+	       "blk @0x%p: 0x%p-0x%p (%u)\n",
+	       blk, blk->start, (int8_t *) blk->start + blk->size, blk->size);
+}
diff --git a/arch/ppc64/lib/sstep.c b/arch/powerpc/lib/sstep.c
index e79123d1485c..666c2aa55016 100644
--- a/arch/ppc64/lib/sstep.c
+++ b/arch/powerpc/lib/sstep.c
@@ -10,13 +10,18 @@
  */
 #include <linux/kernel.h>
 #include <linux/ptrace.h>
+#include <linux/config.h>
 #include <asm/sstep.h>
 #include <asm/processor.h>
 
 extern char system_call_common[];
 
+#ifdef CONFIG_PPC64
 /* Bits in SRR1 that are copied from MSR */
 #define MSR_MASK	0xffffffff87c0ffff
+#else
+#define MSR_MASK	0x87c0ffff
+#endif
 
 /*
  * Determine whether a conditional branch instruction would branch.
@@ -66,6 +71,7 @@ int emulate_step(struct pt_regs *regs, unsigned int instr)
 		if (branch_taken(instr, regs))
 			regs->nip = imm;
 		return 1;
+#ifdef CONFIG_PPC64
 	case 17:	/* sc */
 		/*
 		 * N.B. this uses knowledge about how the syscall
@@ -79,6 +85,7 @@ int emulate_step(struct pt_regs *regs, unsigned int instr)
 		regs->nip = (unsigned long) &system_call_common;
 		regs->msr = MSR_KERNEL;
 		return 1;
+#endif
 	case 18:	/* b */
 		imm = instr & 0x03fffffc;
 		if (imm & 0x02000000)
@@ -121,6 +128,15 @@ int emulate_step(struct pt_regs *regs, unsigned int instr)
 			if ((regs->msr & MSR_SF) == 0)
 				regs->nip &= 0xffffffffUL;
 			return 1;
+		case 0x124:	/* mtmsr */
+			imm = regs->gpr[rd];
+			if ((imm & MSR_RI) == 0)
+				/* can't step mtmsr that would clear MSR_RI */
+				return -1;
+			regs->msr = imm;
+			regs->nip += 4;
+			return 1;
+#ifdef CONFIG_PPC64
 		case 0x164:	/* mtmsrd */
 			/* only MSR_EE and MSR_RI get changed if bit 15 set */
 			/* mtmsrd doesn't change MSR_HV and MSR_ME */
@@ -135,6 +151,7 @@ int emulate_step(struct pt_regs *regs, unsigned int instr)
 			if ((imm & MSR_SF) == 0)
 				regs->nip &= 0xffffffffUL;
 			return 1;
+#endif
 		}
 	}
 	return 0;
diff --git a/arch/ppc64/lib/strcase.c b/arch/powerpc/lib/strcase.c
index e84f243368c0..36b521091bbc 100644
--- a/arch/ppc64/lib/strcase.c
+++ b/arch/powerpc/lib/strcase.c
@@ -1,11 +1,3 @@
-/*
- * c 2001 PPC 64 Team, IBM Corp
- *
- *      This program is free software; you can redistribute it and/or
- *      modify it under the terms of the GNU General Public License
- *      as published by the Free Software Foundation; either version
- *      2 of the License, or (at your option) any later version.
- */
 #include <linux/ctype.h>
 
 int strcasecmp(const char *s1, const char *s2)
diff --git a/arch/ppc64/lib/string.S b/arch/powerpc/lib/string.S
index 813587e5c2ec..b9ca84ed8927 100644
--- a/arch/ppc64/lib/string.S
+++ b/arch/powerpc/lib/string.S
@@ -8,10 +8,21 @@
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */
+#include <linux/config.h>
 #include <asm/processor.h>
 #include <asm/errno.h>
 #include <asm/ppc_asm.h>
 
+	.section __ex_table,"a"
+#ifdef CONFIG_PPC64
+	.align	3
+#define EXTBL	.llong
+#else
+	.align	2
+#define EXTBL	.long
+#endif
+	.text
+	
 _GLOBAL(strcpy)
 	addi	r5,r3,-1
 	addi	r4,r4,-1
@@ -21,6 +32,8 @@ _GLOBAL(strcpy)
 	bne	1b
 	blr
 
+/* This clears out any unused part of the destination buffer,
+   just as the libc version does.  -- paulus */
 _GLOBAL(strncpy)
 	cmpwi	0,r5,0
 	beqlr
@@ -31,6 +44,12 @@ _GLOBAL(strncpy)
 	cmpwi	0,r0,0
 	stbu	r0,1(r6)
 	bdnzf	2,1b		/* dec ctr, branch if ctr != 0 && !cr0.eq */
+	bnelr			/* if we didn't hit a null char, we're done */
+	mfctr	r5
+	cmpwi	0,r5,0		/* any space left in destination buffer? */
+	beqlr			/* we know r0 == 0 here */
+2:	stbu	r0,1(r6)	/* clear it out if so */
+	bdnz	2b
 	blr
 
 _GLOBAL(strcat)
@@ -65,112 +84,6 @@ _GLOBAL(strlen)
 	subf	r3,r3,r4
 	blr
 
-_GLOBAL(memset)
-	neg	r0,r3
-	rlwimi	r4,r4,8,16,23
-	andi.	r0,r0,7			/* # bytes to be 8-byte aligned */
-	rlwimi	r4,r4,16,0,15
-	cmplw	cr1,r5,r0		/* do we get that far? */
-	rldimi	r4,r4,32,0
-	mtcrf	1,r0
-	mr	r6,r3
-	blt	cr1,8f
-	beq+	3f			/* if already 8-byte aligned */
-	subf	r5,r0,r5
-	bf	31,1f
-	stb	r4,0(r6)
-	addi	r6,r6,1
-1:	bf	30,2f
-	sth	r4,0(r6)
-	addi	r6,r6,2
-2:	bf	29,3f
-	stw	r4,0(r6)
-	addi	r6,r6,4
-3:	srdi.	r0,r5,6
-	clrldi	r5,r5,58
-	mtctr	r0
-	beq	5f
-4:	std	r4,0(r6)
-	std	r4,8(r6)
-	std	r4,16(r6)
-	std	r4,24(r6)
-	std	r4,32(r6)
-	std	r4,40(r6)
-	std	r4,48(r6)
-	std	r4,56(r6)
-	addi	r6,r6,64
-	bdnz	4b
-5:	srwi.	r0,r5,3
-	clrlwi	r5,r5,29
-	mtcrf	1,r0
-	beq	8f
-	bf	29,6f
-	std	r4,0(r6)
-	std	r4,8(r6)
-	std	r4,16(r6)
-	std	r4,24(r6)
-	addi	r6,r6,32
-6:	bf	30,7f
-	std	r4,0(r6)
-	std	r4,8(r6)
-	addi	r6,r6,16
-7:	bf	31,8f
-	std	r4,0(r6)
-	addi	r6,r6,8
-8:	cmpwi	r5,0
-	mtcrf	1,r5
-	beqlr+
-	bf	29,9f
-	stw	r4,0(r6)
-	addi	r6,r6,4
-9:	bf	30,10f
-	sth	r4,0(r6)
-	addi	r6,r6,2
-10:	bflr	31
-	stb	r4,0(r6)
-	blr
-
-_GLOBAL(memmove)
-	cmplw	0,r3,r4
-	bgt	.backwards_memcpy
-	b	.memcpy
-
-_GLOBAL(backwards_memcpy)
-	rlwinm.	r7,r5,32-3,3,31		/* r0 = r5 >> 3 */
-	add	r6,r3,r5
-	add	r4,r4,r5
-	beq	2f
-	andi.	r0,r6,3
-	mtctr	r7
-	bne	5f
-1:	lwz	r7,-4(r4)
-	lwzu	r8,-8(r4)
-	stw	r7,-4(r6)
-	stwu	r8,-8(r6)
-	bdnz	1b
-	andi.	r5,r5,7
-2:	cmplwi	0,r5,4
-	blt	3f
-	lwzu	r0,-4(r4)
-	subi	r5,r5,4
-	stwu	r0,-4(r6)
-3:	cmpwi	0,r5,0
-	beqlr
-	mtctr	r5
-4:	lbzu	r0,-1(r4)
-	stbu	r0,-1(r6)
-	bdnz	4b
-	blr
-5:	mtctr	r0
-6:	lbzu	r7,-1(r4)
-	stbu	r7,-1(r6)
-	bdnz	6b
-	subf	r5,r0,r5
-	rlwinm.	r7,r5,32-3,3,31
-	beq	2b
-	mtctr	r7
-	b	1b
-	
 _GLOBAL(memcmp)
 	cmpwi	0,r5,0
 	ble-	2f
@@ -234,13 +147,11 @@ _GLOBAL(__clear_user)
 	blr
 
 	.section __ex_table,"a"
-	.align	3
-	.llong	11b,90b
-	.llong	1b,91b
-	.llong	8b,92b
+	EXTBL	11b,90b
+	EXTBL	1b,91b
+	EXTBL	8b,92b
 	.text
 
-/* r3 = dst, r4 = src, r5 = count */
 _GLOBAL(__strncpy_from_user)
 	addi	r6,r3,-1
 	addi	r4,r4,-1
@@ -259,14 +170,17 @@ _GLOBAL(__strncpy_from_user)
 	blr
 
 	.section __ex_table,"a"
-	.align	3
-	.llong	1b,99b
+	EXTBL	1b,99b
 	.text
 
-/* r3 = str, r4 = len (> 0) */
+/* r3 = str, r4 = len (> 0), r5 = top (highest addr) */
 _GLOBAL(__strnlen_user)
 	addi	r7,r3,-1
-	mtctr	r4		/* ctr = len */
+	subf	r6,r7,r5	/* top+1 - str */
+	cmplw	0,r4,r6
+	bge	0f
+	mr	r6,r4
+0:	mtctr	r6		/* ctr = min(len, top - str) */
 1:	lbzu	r0,1(r7)	/* get next byte */
 	cmpwi	0,r0,0
 	bdnzf	2,1b		/* loop if --ctr != 0 && byte != 0 */
@@ -281,5 +195,4 @@ _GLOBAL(__strnlen_user)
 	blr
 
 	.section __ex_table,"a"
-	.align	3
-	.llong	1b,99b
+	EXTBL	1b,99b
diff --git a/arch/ppc64/lib/usercopy.c b/arch/powerpc/lib/usercopy_64.c
index 5eea6f3c1e03..5eea6f3c1e03 100644
--- a/arch/ppc64/lib/usercopy.c
+++ b/arch/powerpc/lib/usercopy_64.c
diff --git a/arch/powerpc/mm/44x_mmu.c b/arch/powerpc/mm/44x_mmu.c
new file mode 100644
index 000000000000..3d79ce281b67
--- /dev/null
+++ b/arch/powerpc/mm/44x_mmu.c
@@ -0,0 +1,120 @@
+/*
+ * Modifications by Matt Porter (mporter@mvista.com) to support
+ * PPC44x Book E processors.
+ *
+ * This file contains the routines for initializing the MMU
+ * on the 4xx series of chips.
+ *  -- paulus
+ *
+ *  Derived from arch/ppc/mm/init.c:
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ *    Copyright (C) 1996 Paul Mackerras
+ *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ *  Derived from "arch/i386/mm/init.c"
+ *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/stddef.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/highmem.h>
+
+#include <asm/pgalloc.h>
+#include <asm/prom.h>
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <asm/pgtable.h>
+#include <asm/mmu.h>
+#include <asm/uaccess.h>
+#include <asm/smp.h>
+#include <asm/bootx.h>
+#include <asm/machdep.h>
+#include <asm/setup.h>
+
+#include "mmu_decl.h"
+
+extern char etext[], _stext[];
+
+/* Used by the 44x TLB replacement exception handler.
+ * Just needed it declared someplace.
+ */
+unsigned int tlb_44x_index = 0;
+unsigned int tlb_44x_hwater = 62;
+
+/*
+ * "Pins" a 256MB TLB entry in AS0 for kernel lowmem
+ */
+static void __init
+ppc44x_pin_tlb(int slot, unsigned int virt, unsigned int phys)
+{
+	unsigned long attrib = 0;
+
+	__asm__ __volatile__("\
+	clrrwi	%2,%2,10\n\
+	ori	%2,%2,%4\n\
+	clrrwi	%1,%1,10\n\
+	li	%0,0\n\
+	ori	%0,%0,%5\n\
+	tlbwe	%2,%3,%6\n\
+	tlbwe	%1,%3,%7\n\
+	tlbwe	%0,%3,%8"
+	:
+	: "r" (attrib), "r" (phys), "r" (virt), "r" (slot),
+	  "i" (PPC44x_TLB_VALID | PPC44x_TLB_256M),
+	  "i" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G),
+	  "i" (PPC44x_TLB_PAGEID),
+	  "i" (PPC44x_TLB_XLAT),
+	  "i" (PPC44x_TLB_ATTRIB));
+}
+
+/*
+ * MMU_init_hw does the chip-specific initialization of the MMU hardware.
+ */
+void __init MMU_init_hw(void)
+{
+	flush_instruction_cache();
+}
+
+unsigned long __init mmu_mapin_ram(void)
+{
+	unsigned int pinned_tlbs = 1;
+	int i;
+
+	/* Determine number of entries necessary to cover lowmem */
+	pinned_tlbs = (unsigned int)
+		(_ALIGN(total_lowmem, PPC44x_PIN_SIZE) >> PPC44x_PIN_SHIFT);
+
+	/* Write upper watermark to save location */
+	tlb_44x_hwater = PPC44x_LOW_SLOT - pinned_tlbs;
+
+	/* If necessary, set additional pinned TLBs */
+	if (pinned_tlbs > 1)
+		for (i = (PPC44x_LOW_SLOT-(pinned_tlbs-1)); i < PPC44x_LOW_SLOT; i++) {
+			unsigned int phys_addr = (PPC44x_LOW_SLOT-i) * PPC44x_PIN_SIZE;
+			ppc44x_pin_tlb(i, phys_addr+PAGE_OFFSET, phys_addr);
+		}
+
+	return total_lowmem;
+}
diff --git a/arch/powerpc/mm/4xx_mmu.c b/arch/powerpc/mm/4xx_mmu.c
new file mode 100644
index 000000000000..4d006aa1a0d1
--- /dev/null
+++ b/arch/powerpc/mm/4xx_mmu.c
@@ -0,0 +1,137 @@
+/*
+ * This file contains the routines for initializing the MMU
+ * on the 4xx series of chips.
+ *  -- paulus
+ *
+ *  Derived from arch/ppc/mm/init.c:
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ *    Copyright (C) 1996 Paul Mackerras
+ *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ *  Derived from "arch/i386/mm/init.c"
+ *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/stddef.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/highmem.h>
+
+#include <asm/pgalloc.h>
+#include <asm/prom.h>
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <asm/pgtable.h>
+#include <asm/mmu.h>
+#include <asm/uaccess.h>
+#include <asm/smp.h>
+#include <asm/bootx.h>
+#include <asm/machdep.h>
+#include <asm/setup.h>
+#include "mmu_decl.h"
+
+extern int __map_without_ltlbs;
+/*
+ * MMU_init_hw does the chip-specific initialization of the MMU hardware.
+ */
+void __init MMU_init_hw(void)
+{
+	/*
+	 * The Zone Protection Register (ZPR) defines how protection will
+	 * be applied to every page which is a member of a given zone. At
+	 * present, we utilize only two of the 4xx's zones.
+	 * The zone index bits (of ZSEL) in the PTE are used for software
+	 * indicators, except the LSB.  For user access, zone 1 is used,
+	 * for kernel access, zone 0 is used.  We set all but zone 1
+	 * to zero, allowing only kernel access as indicated in the PTE.
+	 * For zone 1, we set a 01 binary (a value of 10 will not work)
+	 * to allow user access as indicated in the PTE.  This also allows
+	 * kernel access as indicated in the PTE.
+	 */
+
+        mtspr(SPRN_ZPR, 0x10000000);
+
+	flush_instruction_cache();
+
+	/*
+	 * Set up the real-mode cache parameters for the exception vector
+	 * handlers (which are run in real-mode).
+	 */
+
+        mtspr(SPRN_DCWR, 0x00000000);	/* All caching is write-back */
+
+        /*
+	 * Cache instruction and data space where the exception
+	 * vectors and the kernel live in real-mode.
+	 */
+
+        mtspr(SPRN_DCCR, 0xF0000000);	/* 512 MB of data space at 0x0. */
+        mtspr(SPRN_ICCR, 0xF0000000);	/* 512 MB of instr. space at 0x0. */
+}
+
+#define LARGE_PAGE_SIZE_16M	(1<<24)
+#define LARGE_PAGE_SIZE_4M	(1<<22)
+
+unsigned long __init mmu_mapin_ram(void)
+{
+	unsigned long v, s;
+	phys_addr_t p;
+
+	v = KERNELBASE;
+	p = PPC_MEMSTART;
+	s = 0;
+
+	if (__map_without_ltlbs) {
+		return s;
+	}
+
+	while (s <= (total_lowmem - LARGE_PAGE_SIZE_16M)) {
+		pmd_t *pmdp;
+		unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE;
+
+		pmdp = pmd_offset(pgd_offset_k(v), v);
+		pmd_val(*pmdp++) = val;
+		pmd_val(*pmdp++) = val;
+		pmd_val(*pmdp++) = val;
+		pmd_val(*pmdp++) = val;
+
+		v += LARGE_PAGE_SIZE_16M;
+		p += LARGE_PAGE_SIZE_16M;
+		s += LARGE_PAGE_SIZE_16M;
+	}
+
+	while (s <= (total_lowmem - LARGE_PAGE_SIZE_4M)) {
+		pmd_t *pmdp;
+		unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE;
+
+		pmdp = pmd_offset(pgd_offset_k(v), v);
+		pmd_val(*pmdp) = val;
+
+		v += LARGE_PAGE_SIZE_4M;
+		p += LARGE_PAGE_SIZE_4M;
+		s += LARGE_PAGE_SIZE_4M;
+	}
+
+	return s;
+}
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
new file mode 100644
index 000000000000..93441e7a2921
--- /dev/null
+++ b/arch/powerpc/mm/Makefile
@@ -0,0 +1,21 @@
+#
+# Makefile for the linux ppc-specific parts of the memory manager.
+#
+
+ifeq ($(CONFIG_PPC64),y)
+EXTRA_CFLAGS	+= -mno-minimal-toc
+endif
+
+obj-y				:= fault.o mem.o lmb.o
+obj-$(CONFIG_PPC32)		+= init_32.o pgtable_32.o mmu_context_32.o
+hash-$(CONFIG_PPC_MULTIPLATFORM) := hash_native_64.o
+obj-$(CONFIG_PPC64)		+= init_64.o pgtable_64.o mmu_context_64.o \
+				   hash_utils_64.o hash_low_64.o tlb_64.o \
+				   slb_low.o slb.o stab.o mmap.o imalloc.o \
+				   $(hash-y)
+obj-$(CONFIG_PPC_STD_MMU_32)	+= ppc_mmu_32.o hash_low_32.o tlb_32.o
+obj-$(CONFIG_40x)		+= 4xx_mmu.o
+obj-$(CONFIG_44x)		+= 44x_mmu.o
+obj-$(CONFIG_FSL_BOOKE)		+= fsl_booke_mmu.o
+obj-$(CONFIG_NEED_MULTIPLE_NODES) += numa.o
+obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
diff --git a/arch/ppc64/mm/fault.c b/arch/powerpc/mm/fault.c
index be3f25cf3e9f..93d4fbfdb724 100644
--- a/arch/ppc64/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -1,7 +1,7 @@
 /*
  *  arch/ppc/mm/fault.c
  *
- *  PowerPC version 
+ *  PowerPC version
  *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
  *
  *  Derived from "arch/i386/mm/fault.c"
@@ -24,10 +24,11 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/types.h>
+#include <linux/ptrace.h>
 #include <linux/mman.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
-#include <linux/smp_lock.h>
+#include <linux/highmem.h>
 #include <linux/module.h>
 #include <linux/kprobes.h>
 
@@ -37,6 +38,7 @@
 #include <asm/mmu_context.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
+#include <asm/tlbflush.h>
 #include <asm/kdebug.h>
 #include <asm/siginfo.h>
 
@@ -78,6 +80,7 @@ static int store_updates_sp(struct pt_regs *regs)
 	return 0;
 }
 
+#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
 static void do_dabr(struct pt_regs *regs, unsigned long error_code)
 {
 	siginfo_t info;
@@ -99,12 +102,18 @@ static void do_dabr(struct pt_regs *regs, unsigned long error_code)
 	info.si_addr = (void __user *)regs->nip;
 	force_sig_info(SIGTRAP, &info, current);
 }
+#endif /* !(CONFIG_4xx || CONFIG_BOOKE)*/
 
 /*
- * The error_code parameter is
+ * For 600- and 800-family processors, the error_code parameter is DSISR
+ * for a data fault, SRR1 for an instruction fault. For 400-family processors
+ * the error_code parameter is ESR for a data fault, 0 for an instruction
+ * fault.
+ * For 64-bit processors, the error_code parameter is
  *  - DSISR for a non-SLB data access fault,
  *  - SRR1 & 0x08000000 for a non-SLB instruction access fault
  *  - 0 any SLB fault.
+ *
  * The return value is 0 if the fault was handled, or the signal
  * number if this is a kernel fault that can't be handled here.
  */
@@ -114,12 +123,25 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address,
 	struct vm_area_struct * vma;
 	struct mm_struct *mm = current->mm;
 	siginfo_t info;
-	unsigned long code = SEGV_MAPERR;
-	unsigned long is_write = error_code & DSISR_ISSTORE;
-	unsigned long trap = TRAP(regs);
- 	unsigned long is_exec = trap == 0x400;
+	int code = SEGV_MAPERR;
+	int is_write = 0;
+	int trap = TRAP(regs);
+ 	int is_exec = trap == 0x400;
 
-	BUG_ON((trap == 0x380) || (trap == 0x480));
+#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
+	/*
+	 * Fortunately the bit assignments in SRR1 for an instruction
+	 * fault and DSISR for a data fault are mostly the same for the
+	 * bits we are interested in.  But there are some bits which
+	 * indicate errors in DSISR but can validly be set in SRR1.
+	 */
+	if (trap == 0x400)
+		error_code &= 0x48200000;
+	else
+		is_write = error_code & DSISR_ISSTORE;
+#else
+	is_write = error_code & ESR_DST;
+#endif /* CONFIG_4xx || CONFIG_BOOKE */
 
 	if (notify_die(DIE_PAGE_FAULT, "page_fault", regs, error_code,
 				11, SIGSEGV) == NOTIFY_STOP)
@@ -134,10 +156,13 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address,
 	if (!user_mode(regs) && (address >= TASK_SIZE))
 		return SIGSEGV;
 
+#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
   	if (error_code & DSISR_DABRMATCH) {
+		/* DABR match */
 		do_dabr(regs, error_code);
 		return 0;
 	}
+#endif /* !(CONFIG_4xx || CONFIG_BOOKE)*/
 
 	if (in_atomic() || mm == NULL) {
 		if (!user_mode(regs))
@@ -176,10 +201,8 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address,
 	vma = find_vma(mm, address);
 	if (!vma)
 		goto bad_area;
-
-	if (vma->vm_start <= address) {
+	if (vma->vm_start <= address)
 		goto good_area;
-	}
 	if (!(vma->vm_flags & VM_GROWSDOWN))
 		goto bad_area;
 
@@ -214,35 +237,76 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address,
 		    && (!user_mode(regs) || !store_updates_sp(regs)))
 			goto bad_area;
 	}
-
 	if (expand_stack(vma, address))
 		goto bad_area;
 
 good_area:
 	code = SEGV_ACCERR;
+#if defined(CONFIG_6xx)
+	if (error_code & 0x95700000)
+		/* an error such as lwarx to I/O controller space,
+		   address matching DABR, eciwx, etc. */
+		goto bad_area;
+#endif /* CONFIG_6xx */
+#if defined(CONFIG_8xx)
+        /* The MPC8xx seems to always set 0x80000000, which is
+         * "undefined".  Of those that can be set, this is the only
+         * one which seems bad.
+         */
+	if (error_code & 0x10000000)
+                /* Guarded storage error. */
+		goto bad_area;
+#endif /* CONFIG_8xx */
 
 	if (is_exec) {
+#ifdef CONFIG_PPC64
 		/* protection fault */
 		if (error_code & DSISR_PROTFAULT)
 			goto bad_area;
 		if (!(vma->vm_flags & VM_EXEC))
 			goto bad_area;
+#endif
+#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+		pte_t *ptep;
+
+		/* Since 4xx/Book-E supports per-page execute permission,
+		 * we lazily flush dcache to icache. */
+		ptep = NULL;
+		if (get_pteptr(mm, address, &ptep) && pte_present(*ptep)) {
+			struct page *page = pte_page(*ptep);
+
+			if (! test_bit(PG_arch_1, &page->flags)) {
+				flush_dcache_icache_page(page);
+				set_bit(PG_arch_1, &page->flags);
+			}
+			pte_update(ptep, 0, _PAGE_HWEXEC);
+			_tlbie(address);
+			pte_unmap(ptep);
+			up_read(&mm->mmap_sem);
+			return 0;
+		}
+		if (ptep != NULL)
+			pte_unmap(ptep);
+#endif
 	/* a write */
 	} else if (is_write) {
 		if (!(vma->vm_flags & VM_WRITE))
 			goto bad_area;
 	/* a read */
 	} else {
-		if (!(vma->vm_flags & VM_READ))
+		/* protection fault */
+		if (error_code & 0x08000000)
+			goto bad_area;
+		if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
 			goto bad_area;
 	}
 
- survive:
 	/*
 	 * If for any reason at all we couldn't handle the fault,
 	 * make sure we exit gracefully rather than endlessly redo
 	 * the fault.
 	 */
+ survive:
 	switch (handle_mm_fault(mm, vma, address, is_write)) {
 
 	case VM_FAULT_MINOR:
@@ -268,15 +332,11 @@ bad_area:
 bad_area_nosemaphore:
 	/* User mode accesses cause a SIGSEGV */
 	if (user_mode(regs)) {
-		info.si_signo = SIGSEGV;
-		info.si_errno = 0;
-		info.si_code = code;
-		info.si_addr = (void __user *) address;
-		force_sig_info(SIGSEGV, &info, current);
+		_exception(SIGSEGV, regs, code, address);
 		return 0;
 	}
 
-	if (trap == 0x400 && (error_code & DSISR_PROTFAULT)
+	if (is_exec && (error_code & DSISR_PROTFAULT)
 	    && printk_ratelimit())
 		printk(KERN_CRIT "kernel tried to execute NX-protected"
 		       " page (%lx) - exploit attempt? (uid: %d)\n",
@@ -315,8 +375,8 @@ do_sigbus:
 
 /*
  * bad_page_fault is called when we have a bad access from the kernel.
- * It is called from do_page_fault above and from some of the procedures
- * in traps.c.
+ * It is called from the DSI and ISI handlers in head.S and from some
+ * of the procedures in traps.c.
  */
 void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig)
 {
@@ -329,5 +389,22 @@ void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig)
 	}
 
 	/* kernel has accessed a bad area */
+
+	printk(KERN_ALERT "Unable to handle kernel paging request for ");
+	switch (regs->trap) {
+		case 0x300:
+		case 0x380:
+			printk("data at address 0x%08lx\n", regs->dar);
+			break;
+		case 0x400:
+		case 0x480:
+			printk("instruction fetch\n");
+			break;
+		default:
+			printk("unknown fault\n");
+	}
+	printk(KERN_ALERT "Faulting instruction address: 0x%08lx\n",
+		regs->nip);
+
 	die("Kernel access of bad area", regs, sig);
 }
diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
new file mode 100644
index 000000000000..5d581bb3aa12
--- /dev/null
+++ b/arch/powerpc/mm/fsl_booke_mmu.c
@@ -0,0 +1,237 @@
+/*
+ * Modifications by Kumar Gala (galak@kernel.crashing.org) to support
+ * E500 Book E processors.
+ *
+ * Copyright 2004 Freescale Semiconductor, Inc
+ *
+ * This file contains the routines for initializing the MMU
+ * on the 4xx series of chips.
+ *  -- paulus
+ *
+ *  Derived from arch/ppc/mm/init.c:
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ *    Copyright (C) 1996 Paul Mackerras
+ *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ *  Derived from "arch/i386/mm/init.c"
+ *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/stddef.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/highmem.h>
+
+#include <asm/pgalloc.h>
+#include <asm/prom.h>
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <asm/pgtable.h>
+#include <asm/mmu.h>
+#include <asm/uaccess.h>
+#include <asm/smp.h>
+#include <asm/bootx.h>
+#include <asm/machdep.h>
+#include <asm/setup.h>
+
+extern void loadcam_entry(unsigned int index);
+unsigned int tlbcam_index;
+unsigned int num_tlbcam_entries;
+static unsigned long __cam0, __cam1, __cam2;
+extern unsigned long total_lowmem;
+extern unsigned long __max_low_memory;
+#define MAX_LOW_MEM	CONFIG_LOWMEM_SIZE
+
+#define NUM_TLBCAMS	(16)
+
+struct tlbcam {
+   	u32	MAS0;
+	u32	MAS1;
+	u32	MAS2;
+	u32	MAS3;
+	u32	MAS7;
+} TLBCAM[NUM_TLBCAMS];
+
+struct tlbcamrange {
+   	unsigned long start;
+	unsigned long limit;
+	phys_addr_t phys;
+} tlbcam_addrs[NUM_TLBCAMS];
+
+extern unsigned int tlbcam_index;
+
+/*
+ * Return PA for this VA if it is mapped by a CAM, or 0
+ */
+unsigned long v_mapped_by_tlbcam(unsigned long va)
+{
+	int b;
+	for (b = 0; b < tlbcam_index; ++b)
+		if (va >= tlbcam_addrs[b].start && va < tlbcam_addrs[b].limit)
+			return tlbcam_addrs[b].phys + (va - tlbcam_addrs[b].start);
+	return 0;
+}
+
+/*
+ * Return VA for a given PA or 0 if not mapped
+ */
+unsigned long p_mapped_by_tlbcam(unsigned long pa)
+{
+	int b;
+	for (b = 0; b < tlbcam_index; ++b)
+		if (pa >= tlbcam_addrs[b].phys
+	    	    && pa < (tlbcam_addrs[b].limit-tlbcam_addrs[b].start)
+		              +tlbcam_addrs[b].phys)
+			return tlbcam_addrs[b].start+(pa-tlbcam_addrs[b].phys);
+	return 0;
+}
+
+/*
+ * Set up one of the I/D BAT (block address translation) register pairs.
+ * The parameters are not checked; in particular size must be a power
+ * of 4 between 4k and 256M.
+ */
+void settlbcam(int index, unsigned long virt, phys_addr_t phys,
+		unsigned int size, int flags, unsigned int pid)
+{
+	unsigned int tsize, lz;
+
+	asm ("cntlzw %0,%1" : "=r" (lz) : "r" (size));
+	tsize = (21 - lz) / 2;
+
+#ifdef CONFIG_SMP
+	if ((flags & _PAGE_NO_CACHE) == 0)
+		flags |= _PAGE_COHERENT;
+#endif
+
+	TLBCAM[index].MAS0 = MAS0_TLBSEL(1) | MAS0_ESEL(index) | MAS0_NV(index+1);
+	TLBCAM[index].MAS1 = MAS1_VALID | MAS1_IPROT | MAS1_TSIZE(tsize) | MAS1_TID(pid);
+	TLBCAM[index].MAS2 = virt & PAGE_MASK;
+
+	TLBCAM[index].MAS2 |= (flags & _PAGE_WRITETHRU) ? MAS2_W : 0;
+	TLBCAM[index].MAS2 |= (flags & _PAGE_NO_CACHE) ? MAS2_I : 0;
+	TLBCAM[index].MAS2 |= (flags & _PAGE_COHERENT) ? MAS2_M : 0;
+	TLBCAM[index].MAS2 |= (flags & _PAGE_GUARDED) ? MAS2_G : 0;
+	TLBCAM[index].MAS2 |= (flags & _PAGE_ENDIAN) ? MAS2_E : 0;
+
+	TLBCAM[index].MAS3 = (phys & PAGE_MASK) | MAS3_SX | MAS3_SR;
+	TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_SW : 0);
+
+#ifndef CONFIG_KGDB /* want user access for breakpoints */
+	if (flags & _PAGE_USER) {
+	   TLBCAM[index].MAS3 |= MAS3_UX | MAS3_UR;
+	   TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_UW : 0);
+	}
+#else
+	TLBCAM[index].MAS3 |= MAS3_UX | MAS3_UR;
+	TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_UW : 0);
+#endif
+
+	tlbcam_addrs[index].start = virt;
+	tlbcam_addrs[index].limit = virt + size - 1;
+	tlbcam_addrs[index].phys = phys;
+
+	loadcam_entry(index);
+}
+
+void invalidate_tlbcam_entry(int index)
+{
+	TLBCAM[index].MAS0 = MAS0_TLBSEL(1) | MAS0_ESEL(index);
+	TLBCAM[index].MAS1 = ~MAS1_VALID;
+
+	loadcam_entry(index);
+}
+
+void __init cam_mapin_ram(unsigned long cam0, unsigned long cam1,
+		unsigned long cam2)
+{
+	settlbcam(0, KERNELBASE, PPC_MEMSTART, cam0, _PAGE_KERNEL, 0);
+	tlbcam_index++;
+	if (cam1) {
+		tlbcam_index++;
+		settlbcam(1, KERNELBASE+cam0, PPC_MEMSTART+cam0, cam1, _PAGE_KERNEL, 0);
+	}
+	if (cam2) {
+		tlbcam_index++;
+		settlbcam(2, KERNELBASE+cam0+cam1, PPC_MEMSTART+cam0+cam1, cam2, _PAGE_KERNEL, 0);
+	}
+}
+
+/*
+ * MMU_init_hw does the chip-specific initialization of the MMU hardware.
+ */
+void __init MMU_init_hw(void)
+{
+	flush_instruction_cache();
+}
+
+unsigned long __init mmu_mapin_ram(void)
+{
+	cam_mapin_ram(__cam0, __cam1, __cam2);
+
+	return __cam0 + __cam1 + __cam2;
+}
+
+
+void __init
+adjust_total_lowmem(void)
+{
+	unsigned long max_low_mem = MAX_LOW_MEM;
+	unsigned long cam_max = 0x10000000;
+	unsigned long ram;
+
+	/* adjust CAM size to max_low_mem */
+	if (max_low_mem < cam_max)
+		cam_max = max_low_mem;
+
+	/* adjust lowmem size to max_low_mem */
+	if (max_low_mem < total_lowmem)
+		ram = max_low_mem;
+	else
+		ram = total_lowmem;
+
+	/* Calculate CAM values */
+	__cam0 = 1UL << 2 * (__ilog2(ram) / 2);
+	if (__cam0 > cam_max)
+		__cam0 = cam_max;
+	ram -= __cam0;
+	if (ram) {
+		__cam1 = 1UL << 2 * (__ilog2(ram) / 2);
+		if (__cam1 > cam_max)
+			__cam1 = cam_max;
+		ram -= __cam1;
+	}
+	if (ram) {
+		__cam2 = 1UL << 2 * (__ilog2(ram) / 2);
+		if (__cam2 > cam_max)
+			__cam2 = cam_max;
+		ram -= __cam2;
+	}
+
+	printk(KERN_INFO "Memory CAM mapping: CAM0=%ldMb, CAM1=%ldMb,"
+			" CAM2=%ldMb residual: %ldMb\n",
+			__cam0 >> 20, __cam1 >> 20, __cam2 >> 20,
+			(total_lowmem - __cam0 - __cam1 - __cam2) >> 20);
+	__max_low_memory = max_low_mem = __cam0 + __cam1 + __cam2;
+}
diff --git a/arch/powerpc/mm/hash_low_32.S b/arch/powerpc/mm/hash_low_32.S
new file mode 100644
index 000000000000..12ccd7155bac
--- /dev/null
+++ b/arch/powerpc/mm/hash_low_32.S
@@ -0,0 +1,618 @@
+/*
+ *  arch/ppc/kernel/hashtable.S
+ *
+ *  $Id: hashtable.S,v 1.6 1999/10/08 01:56:15 paulus Exp $
+ *
+ *  PowerPC version
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *  Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
+ *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
+ *  Adapted for Power Macintosh by Paul Mackerras.
+ *  Low-level exception handlers and MMU support
+ *  rewritten by Paul Mackerras.
+ *    Copyright (C) 1996 Paul Mackerras.
+ *
+ *  This file contains low-level assembler routines for managing
+ *  the PowerPC MMU hash table.  (PPC 8xx processors don't use a
+ *  hash table, so this file is not used on them.)
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/cputable.h>
+#include <asm/ppc_asm.h>
+#include <asm/thread_info.h>
+#include <asm/asm-offsets.h>
+
+#ifdef CONFIG_SMP
+	.comm	mmu_hash_lock,4
+#endif /* CONFIG_SMP */
+
+/*
+ * Sync CPUs with hash_page taking & releasing the hash
+ * table lock
+ */
+#ifdef CONFIG_SMP
+	.text
+_GLOBAL(hash_page_sync)
+	lis	r8,mmu_hash_lock@h
+	ori	r8,r8,mmu_hash_lock@l
+	lis	r0,0x0fff
+	b	10f
+11:	lwz	r6,0(r8)
+	cmpwi	0,r6,0
+	bne	11b
+10:	lwarx	r6,0,r8
+	cmpwi	0,r6,0
+	bne-	11b
+	stwcx.	r0,0,r8
+	bne-	10b
+	isync
+	eieio
+	li	r0,0
+	stw	r0,0(r8)
+	blr	
+#endif
+
+/*
+ * Load a PTE into the hash table, if possible.
+ * The address is in r4, and r3 contains an access flag:
+ * _PAGE_RW (0x400) if a write.
+ * r9 contains the SRR1 value, from which we use the MSR_PR bit.
+ * SPRG3 contains the physical address of the current task's thread.
+ *
+ * Returns to the caller if the access is illegal or there is no
+ * mapping for the address.  Otherwise it places an appropriate PTE
+ * in the hash table and returns from the exception.
+ * Uses r0, r3 - r8, ctr, lr.
+ */
+	.text
+_GLOBAL(hash_page)
+#ifdef CONFIG_PPC64BRIDGE
+	mfmsr	r0
+	clrldi	r0,r0,1		/* make sure it's in 32-bit mode */
+	MTMSRD(r0)
+	isync
+#endif
+	tophys(r7,0)			/* gets -KERNELBASE into r7 */
+#ifdef CONFIG_SMP
+	addis	r8,r7,mmu_hash_lock@h
+	ori	r8,r8,mmu_hash_lock@l
+	lis	r0,0x0fff
+	b	10f
+11:	lwz	r6,0(r8)
+	cmpwi	0,r6,0
+	bne	11b
+10:	lwarx	r6,0,r8
+	cmpwi	0,r6,0
+	bne-	11b
+	stwcx.	r0,0,r8
+	bne-	10b
+	isync
+#endif
+	/* Get PTE (linux-style) and check access */
+	lis	r0,KERNELBASE@h		/* check if kernel address */
+	cmplw	0,r4,r0
+	mfspr	r8,SPRN_SPRG3		/* current task's THREAD (phys) */
+	ori	r3,r3,_PAGE_USER|_PAGE_PRESENT /* test low addresses as user */
+	lwz	r5,PGDIR(r8)		/* virt page-table root */
+	blt+	112f			/* assume user more likely */
+	lis	r5,swapper_pg_dir@ha	/* if kernel address, use */
+	addi	r5,r5,swapper_pg_dir@l	/* kernel page table */
+	rlwimi	r3,r9,32-12,29,29	/* MSR_PR -> _PAGE_USER */
+112:	add	r5,r5,r7		/* convert to phys addr */
+	rlwimi	r5,r4,12,20,29		/* insert top 10 bits of address */
+	lwz	r8,0(r5)		/* get pmd entry */
+	rlwinm.	r8,r8,0,0,19		/* extract address of pte page */
+#ifdef CONFIG_SMP
+	beq-	hash_page_out		/* return if no mapping */
+#else
+	/* XXX it seems like the 601 will give a machine fault on the
+	   rfi if its alignment is wrong (bottom 4 bits of address are
+	   8 or 0xc) and we have had a not-taken conditional branch
+	   to the address following the rfi. */
+	beqlr-
+#endif
+	rlwimi	r8,r4,22,20,29		/* insert next 10 bits of address */
+	rlwinm	r0,r3,32-3,24,24	/* _PAGE_RW access -> _PAGE_DIRTY */
+	ori	r0,r0,_PAGE_ACCESSED|_PAGE_HASHPTE
+
+	/*
+	 * Update the linux PTE atomically.  We do the lwarx up-front
+	 * because almost always, there won't be a permission violation
+	 * and there won't already be an HPTE, and thus we will have
+	 * to update the PTE to set _PAGE_HASHPTE.  -- paulus.
+	 */
+retry:
+	lwarx	r6,0,r8			/* get linux-style pte */
+	andc.	r5,r3,r6		/* check access & ~permission */
+#ifdef CONFIG_SMP
+	bne-	hash_page_out		/* return if access not permitted */
+#else
+	bnelr-
+#endif
+	or	r5,r0,r6		/* set accessed/dirty bits */
+	stwcx.	r5,0,r8			/* attempt to update PTE */
+	bne-	retry			/* retry if someone got there first */
+
+	mfsrin	r3,r4			/* get segment reg for segment */
+	mfctr	r0
+	stw	r0,_CTR(r11)
+	bl	create_hpte		/* add the hash table entry */
+
+#ifdef CONFIG_SMP
+	eieio
+	addis	r8,r7,mmu_hash_lock@ha
+	li	r0,0
+	stw	r0,mmu_hash_lock@l(r8)
+#endif
+
+	/* Return from the exception */
+	lwz	r5,_CTR(r11)
+	mtctr	r5
+	lwz	r0,GPR0(r11)
+	lwz	r7,GPR7(r11)
+	lwz	r8,GPR8(r11)
+	b	fast_exception_return
+
+#ifdef CONFIG_SMP
+hash_page_out:
+	eieio
+	addis	r8,r7,mmu_hash_lock@ha
+	li	r0,0
+	stw	r0,mmu_hash_lock@l(r8)
+	blr
+#endif /* CONFIG_SMP */
+
+/*
+ * Add an entry for a particular page to the hash table.
+ *
+ * add_hash_page(unsigned context, unsigned long va, unsigned long pmdval)
+ *
+ * We assume any necessary modifications to the pte (e.g. setting
+ * the accessed bit) have already been done and that there is actually
+ * a hash table in use (i.e. we're not on a 603).
+ */
+_GLOBAL(add_hash_page)
+	mflr	r0
+	stw	r0,4(r1)
+
+	/* Convert context and va to VSID */
+	mulli	r3,r3,897*16		/* multiply context by context skew */
+	rlwinm	r0,r4,4,28,31		/* get ESID (top 4 bits of va) */
+	mulli	r0,r0,0x111		/* multiply by ESID skew */
+	add	r3,r3,r0		/* note create_hpte trims to 24 bits */
+
+#ifdef CONFIG_SMP
+	rlwinm	r8,r1,0,0,18		/* use cpu number to make tag */
+	lwz	r8,TI_CPU(r8)		/* to go in mmu_hash_lock */
+	oris	r8,r8,12
+#endif /* CONFIG_SMP */
+
+	/*
+	 * We disable interrupts here, even on UP, because we don't
+	 * want to race with hash_page, and because we want the
+	 * _PAGE_HASHPTE bit to be a reliable indication of whether
+	 * the HPTE exists (or at least whether one did once).
+	 * We also turn off the MMU for data accesses so that we
+	 * we can't take a hash table miss (assuming the code is
+	 * covered by a BAT).  -- paulus
+	 */
+	mfmsr	r10
+	SYNC
+	rlwinm	r0,r10,0,17,15		/* clear bit 16 (MSR_EE) */
+	rlwinm	r0,r0,0,28,26		/* clear MSR_DR */
+	mtmsr	r0
+	SYNC_601
+	isync
+
+	tophys(r7,0)
+
+#ifdef CONFIG_SMP
+	addis	r9,r7,mmu_hash_lock@ha
+	addi	r9,r9,mmu_hash_lock@l
+10:	lwarx	r0,0,r9			/* take the mmu_hash_lock */
+	cmpi	0,r0,0
+	bne-	11f
+	stwcx.	r8,0,r9
+	beq+	12f
+11:	lwz	r0,0(r9)
+	cmpi	0,r0,0
+	beq	10b
+	b	11b
+12:	isync
+#endif
+
+	/*
+	 * Fetch the linux pte and test and set _PAGE_HASHPTE atomically.
+	 * If _PAGE_HASHPTE was already set, we don't replace the existing
+	 * HPTE, so we just unlock and return.
+	 */
+	mr	r8,r5
+	rlwimi	r8,r4,22,20,29
+1:	lwarx	r6,0,r8
+	andi.	r0,r6,_PAGE_HASHPTE
+	bne	9f			/* if HASHPTE already set, done */
+	ori	r5,r6,_PAGE_HASHPTE
+	stwcx.	r5,0,r8
+	bne-	1b
+
+	bl	create_hpte
+
+9:
+#ifdef CONFIG_SMP
+	eieio
+	li	r0,0
+	stw	r0,0(r9)		/* clear mmu_hash_lock */
+#endif
+
+	/* reenable interrupts and DR */
+	mtmsr	r10
+	SYNC_601
+	isync
+
+	lwz	r0,4(r1)
+	mtlr	r0
+	blr
+
+/*
+ * This routine adds a hardware PTE to the hash table.
+ * It is designed to be called with the MMU either on or off.
+ * r3 contains the VSID, r4 contains the virtual address,
+ * r5 contains the linux PTE, r6 contains the old value of the
+ * linux PTE (before setting _PAGE_HASHPTE) and r7 contains the
+ * offset to be added to addresses (0 if the MMU is on,
+ * -KERNELBASE if it is off).
+ * On SMP, the caller should have the mmu_hash_lock held.
+ * We assume that the caller has (or will) set the _PAGE_HASHPTE
+ * bit in the linux PTE in memory.  The value passed in r6 should
+ * be the old linux PTE value; if it doesn't have _PAGE_HASHPTE set
+ * this routine will skip the search for an existing HPTE.
+ * This procedure modifies r0, r3 - r6, r8, cr0.
+ *  -- paulus.
+ *
+ * For speed, 4 of the instructions get patched once the size and
+ * physical address of the hash table are known.  These definitions
+ * of Hash_base and Hash_bits below are just an example.
+ */
+Hash_base = 0xc0180000
+Hash_bits = 12				/* e.g. 256kB hash table */
+Hash_msk = (((1 << Hash_bits) - 1) * 64)
+
+#ifndef CONFIG_PPC64BRIDGE
+/* defines for the PTE format for 32-bit PPCs */
+#define PTE_SIZE	8
+#define PTEG_SIZE	64
+#define LG_PTEG_SIZE	6
+#define LDPTEu		lwzu
+#define STPTE		stw
+#define CMPPTE		cmpw
+#define PTE_H		0x40
+#define PTE_V		0x80000000
+#define TST_V(r)	rlwinm. r,r,0,0,0
+#define SET_V(r)	oris r,r,PTE_V@h
+#define CLR_V(r,t)	rlwinm r,r,0,1,31
+
+#else
+/* defines for the PTE format for 64-bit PPCs */
+#define PTE_SIZE	16
+#define PTEG_SIZE	128
+#define LG_PTEG_SIZE	7
+#define LDPTEu		ldu
+#define STPTE		std
+#define CMPPTE		cmpd
+#define PTE_H		2
+#define PTE_V		1
+#define TST_V(r)	andi. r,r,PTE_V
+#define SET_V(r)	ori r,r,PTE_V
+#define CLR_V(r,t)	li t,PTE_V; andc r,r,t
+#endif /* CONFIG_PPC64BRIDGE */
+
+#define HASH_LEFT	31-(LG_PTEG_SIZE+Hash_bits-1)
+#define HASH_RIGHT	31-LG_PTEG_SIZE
+
+_GLOBAL(create_hpte)
+	/* Convert linux-style PTE (r5) to low word of PPC-style PTE (r8) */
+	rlwinm	r8,r5,32-10,31,31	/* _PAGE_RW -> PP lsb */
+	rlwinm	r0,r5,32-7,31,31	/* _PAGE_DIRTY -> PP lsb */
+	and	r8,r8,r0		/* writable if _RW & _DIRTY */
+	rlwimi	r5,r5,32-1,30,30	/* _PAGE_USER -> PP msb */
+	rlwimi	r5,r5,32-2,31,31	/* _PAGE_USER -> PP lsb */
+	ori	r8,r8,0xe14		/* clear out reserved bits and M */
+	andc	r8,r5,r8		/* PP = user? (rw&dirty? 2: 3): 0 */
+BEGIN_FTR_SECTION
+	ori	r8,r8,_PAGE_COHERENT	/* set M (coherence required) */
+END_FTR_SECTION_IFSET(CPU_FTR_NEED_COHERENT)
+
+	/* Construct the high word of the PPC-style PTE (r5) */
+#ifndef CONFIG_PPC64BRIDGE
+	rlwinm	r5,r3,7,1,24		/* put VSID in 0x7fffff80 bits */
+	rlwimi	r5,r4,10,26,31		/* put in API (abbrev page index) */
+#else /* CONFIG_PPC64BRIDGE */
+	clrlwi	r3,r3,8			/* reduce vsid to 24 bits */
+	sldi	r5,r3,12		/* shift vsid into position */
+	rlwimi	r5,r4,16,20,24		/* put in API (abbrev page index) */
+#endif /* CONFIG_PPC64BRIDGE */
+	SET_V(r5)			/* set V (valid) bit */
+
+	/* Get the address of the primary PTE group in the hash table (r3) */
+_GLOBAL(hash_page_patch_A)
+	addis	r0,r7,Hash_base@h	/* base address of hash table */
+	rlwimi	r0,r3,LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT    /* VSID -> hash */
+	rlwinm	r3,r4,20+LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT /* PI -> hash */
+	xor	r3,r3,r0		/* make primary hash */
+	li	r0,8			/* PTEs/group */
+
+	/*
+	 * Test the _PAGE_HASHPTE bit in the old linux PTE, and skip the search
+	 * if it is clear, meaning that the HPTE isn't there already...
+	 */
+	andi.	r6,r6,_PAGE_HASHPTE
+	beq+	10f			/* no PTE: go look for an empty slot */
+	tlbie	r4
+
+	addis	r4,r7,htab_hash_searches@ha
+	lwz	r6,htab_hash_searches@l(r4)
+	addi	r6,r6,1			/* count how many searches we do */
+	stw	r6,htab_hash_searches@l(r4)
+
+	/* Search the primary PTEG for a PTE whose 1st (d)word matches r5 */
+	mtctr	r0
+	addi	r4,r3,-PTE_SIZE
+1:	LDPTEu	r6,PTE_SIZE(r4)		/* get next PTE */
+	CMPPTE	0,r6,r5
+	bdnzf	2,1b			/* loop while ctr != 0 && !cr0.eq */
+	beq+	found_slot
+
+	/* Search the secondary PTEG for a matching PTE */
+	ori	r5,r5,PTE_H		/* set H (secondary hash) bit */
+_GLOBAL(hash_page_patch_B)
+	xoris	r4,r3,Hash_msk>>16	/* compute secondary hash */
+	xori	r4,r4,(-PTEG_SIZE & 0xffff)
+	addi	r4,r4,-PTE_SIZE
+	mtctr	r0
+2:	LDPTEu	r6,PTE_SIZE(r4)
+	CMPPTE	0,r6,r5
+	bdnzf	2,2b
+	beq+	found_slot
+	xori	r5,r5,PTE_H		/* clear H bit again */
+
+	/* Search the primary PTEG for an empty slot */
+10:	mtctr	r0
+	addi	r4,r3,-PTE_SIZE		/* search primary PTEG */
+1:	LDPTEu	r6,PTE_SIZE(r4)		/* get next PTE */
+	TST_V(r6)			/* test valid bit */
+	bdnzf	2,1b			/* loop while ctr != 0 && !cr0.eq */
+	beq+	found_empty
+
+	/* update counter of times that the primary PTEG is full */
+	addis	r4,r7,primary_pteg_full@ha
+	lwz	r6,primary_pteg_full@l(r4)
+	addi	r6,r6,1
+	stw	r6,primary_pteg_full@l(r4)
+
+	/* Search the secondary PTEG for an empty slot */
+	ori	r5,r5,PTE_H		/* set H (secondary hash) bit */
+_GLOBAL(hash_page_patch_C)
+	xoris	r4,r3,Hash_msk>>16	/* compute secondary hash */
+	xori	r4,r4,(-PTEG_SIZE & 0xffff)
+	addi	r4,r4,-PTE_SIZE
+	mtctr	r0
+2:	LDPTEu	r6,PTE_SIZE(r4)
+	TST_V(r6)
+	bdnzf	2,2b
+	beq+	found_empty
+	xori	r5,r5,PTE_H		/* clear H bit again */
+
+	/*
+	 * Choose an arbitrary slot in the primary PTEG to overwrite.
+	 * Since both the primary and secondary PTEGs are full, and we
+	 * have no information that the PTEs in the primary PTEG are
+	 * more important or useful than those in the secondary PTEG,
+	 * and we know there is a definite (although small) speed
+	 * advantage to putting the PTE in the primary PTEG, we always
+	 * put the PTE in the primary PTEG.
+	 */
+	addis	r4,r7,next_slot@ha
+	lwz	r6,next_slot@l(r4)
+	addi	r6,r6,PTE_SIZE
+	andi.	r6,r6,7*PTE_SIZE
+	stw	r6,next_slot@l(r4)
+	add	r4,r3,r6
+
+#ifndef CONFIG_SMP
+	/* Store PTE in PTEG */
+found_empty:
+	STPTE	r5,0(r4)
+found_slot:
+	STPTE	r8,PTE_SIZE/2(r4)
+
+#else /* CONFIG_SMP */
+/*
+ * Between the tlbie above and updating the hash table entry below,
+ * another CPU could read the hash table entry and put it in its TLB.
+ * There are 3 cases:
+ * 1. using an empty slot
+ * 2. updating an earlier entry to change permissions (i.e. enable write)
+ * 3. taking over the PTE for an unrelated address
+ *
+ * In each case it doesn't really matter if the other CPUs have the old
+ * PTE in their TLB.  So we don't need to bother with another tlbie here,
+ * which is convenient as we've overwritten the register that had the
+ * address. :-)  The tlbie above is mainly to make sure that this CPU comes
+ * and gets the new PTE from the hash table.
+ *
+ * We do however have to make sure that the PTE is never in an invalid
+ * state with the V bit set.
+ */
+found_empty:
+found_slot:
+	CLR_V(r5,r0)		/* clear V (valid) bit in PTE */
+	STPTE	r5,0(r4)
+	sync
+	TLBSYNC
+	STPTE	r8,PTE_SIZE/2(r4) /* put in correct RPN, WIMG, PP bits */
+	sync
+	SET_V(r5)
+	STPTE	r5,0(r4)	/* finally set V bit in PTE */
+#endif /* CONFIG_SMP */
+
+	sync		/* make sure pte updates get to memory */
+	blr
+
+	.comm	next_slot,4
+	.comm	primary_pteg_full,4
+	.comm	htab_hash_searches,4
+
+/*
+ * Flush the entry for a particular page from the hash table.
+ *
+ * flush_hash_pages(unsigned context, unsigned long va, unsigned long pmdval,
+ *		    int count)
+ *
+ * We assume that there is a hash table in use (Hash != 0).
+ */
+_GLOBAL(flush_hash_pages)
+	tophys(r7,0)
+
+	/*
+	 * We disable interrupts here, even on UP, because we want
+	 * the _PAGE_HASHPTE bit to be a reliable indication of
+	 * whether the HPTE exists (or at least whether one did once).
+	 * We also turn off the MMU for data accesses so that we
+	 * we can't take a hash table miss (assuming the code is
+	 * covered by a BAT).  -- paulus
+	 */
+	mfmsr	r10
+	SYNC
+	rlwinm	r0,r10,0,17,15		/* clear bit 16 (MSR_EE) */
+	rlwinm	r0,r0,0,28,26		/* clear MSR_DR */
+	mtmsr	r0
+	SYNC_601
+	isync
+
+	/* First find a PTE in the range that has _PAGE_HASHPTE set */
+	rlwimi	r5,r4,22,20,29
+1:	lwz	r0,0(r5)
+	cmpwi	cr1,r6,1
+	andi.	r0,r0,_PAGE_HASHPTE
+	bne	2f
+	ble	cr1,19f
+	addi	r4,r4,0x1000
+	addi	r5,r5,4
+	addi	r6,r6,-1
+	b	1b
+
+	/* Convert context and va to VSID */
+2:	mulli	r3,r3,897*16		/* multiply context by context skew */
+	rlwinm	r0,r4,4,28,31		/* get ESID (top 4 bits of va) */
+	mulli	r0,r0,0x111		/* multiply by ESID skew */
+	add	r3,r3,r0		/* note code below trims to 24 bits */
+
+	/* Construct the high word of the PPC-style PTE (r11) */
+#ifndef CONFIG_PPC64BRIDGE
+	rlwinm	r11,r3,7,1,24		/* put VSID in 0x7fffff80 bits */
+	rlwimi	r11,r4,10,26,31		/* put in API (abbrev page index) */
+#else /* CONFIG_PPC64BRIDGE */
+	clrlwi	r3,r3,8			/* reduce vsid to 24 bits */
+	sldi	r11,r3,12		/* shift vsid into position */
+	rlwimi	r11,r4,16,20,24		/* put in API (abbrev page index) */
+#endif /* CONFIG_PPC64BRIDGE */
+	SET_V(r11)			/* set V (valid) bit */
+
+#ifdef CONFIG_SMP
+	addis	r9,r7,mmu_hash_lock@ha
+	addi	r9,r9,mmu_hash_lock@l
+	rlwinm	r8,r1,0,0,18
+	add	r8,r8,r7
+	lwz	r8,TI_CPU(r8)
+	oris	r8,r8,9
+10:	lwarx	r0,0,r9
+	cmpi	0,r0,0
+	bne-	11f
+	stwcx.	r8,0,r9
+	beq+	12f
+11:	lwz	r0,0(r9)
+	cmpi	0,r0,0
+	beq	10b
+	b	11b
+12:	isync
+#endif
+
+	/*
+	 * Check the _PAGE_HASHPTE bit in the linux PTE.  If it is
+	 * already clear, we're done (for this pte).  If not,
+	 * clear it (atomically) and proceed.  -- paulus.
+	 */
+33:	lwarx	r8,0,r5			/* fetch the pte */
+	andi.	r0,r8,_PAGE_HASHPTE
+	beq	8f			/* done if HASHPTE is already clear */
+	rlwinm	r8,r8,0,31,29		/* clear HASHPTE bit */
+	stwcx.	r8,0,r5			/* update the pte */
+	bne-	33b
+
+	/* Get the address of the primary PTE group in the hash table (r3) */
+_GLOBAL(flush_hash_patch_A)
+	addis	r8,r7,Hash_base@h	/* base address of hash table */
+	rlwimi	r8,r3,LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT    /* VSID -> hash */
+	rlwinm	r0,r4,20+LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT /* PI -> hash */
+	xor	r8,r0,r8		/* make primary hash */
+
+	/* Search the primary PTEG for a PTE whose 1st (d)word matches r5 */
+	li	r0,8			/* PTEs/group */
+	mtctr	r0
+	addi	r12,r8,-PTE_SIZE
+1:	LDPTEu	r0,PTE_SIZE(r12)	/* get next PTE */
+	CMPPTE	0,r0,r11
+	bdnzf	2,1b			/* loop while ctr != 0 && !cr0.eq */
+	beq+	3f
+
+	/* Search the secondary PTEG for a matching PTE */
+	ori	r11,r11,PTE_H		/* set H (secondary hash) bit */
+	li	r0,8			/* PTEs/group */
+_GLOBAL(flush_hash_patch_B)
+	xoris	r12,r8,Hash_msk>>16	/* compute secondary hash */
+	xori	r12,r12,(-PTEG_SIZE & 0xffff)
+	addi	r12,r12,-PTE_SIZE
+	mtctr	r0
+2:	LDPTEu	r0,PTE_SIZE(r12)
+	CMPPTE	0,r0,r11
+	bdnzf	2,2b
+	xori	r11,r11,PTE_H		/* clear H again */
+	bne-	4f			/* should rarely fail to find it */
+
+3:	li	r0,0
+	STPTE	r0,0(r12)		/* invalidate entry */
+4:	sync
+	tlbie	r4			/* in hw tlb too */
+	sync
+
+8:	ble	cr1,9f			/* if all ptes checked */
+81:	addi	r6,r6,-1
+	addi	r5,r5,4			/* advance to next pte */
+	addi	r4,r4,0x1000
+	lwz	r0,0(r5)		/* check next pte */
+	cmpwi	cr1,r6,1
+	andi.	r0,r0,_PAGE_HASHPTE
+	bne	33b
+	bgt	cr1,81b
+
+9:
+#ifdef CONFIG_SMP
+	TLBSYNC
+	li	r0,0
+	stw	r0,0(r9)		/* clear mmu_hash_lock */
+#endif
+
+19:	mtmsr	r10
+	SYNC_601
+	isync
+	blr
diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S
new file mode 100644
index 000000000000..e0d02c4a2615
--- /dev/null
+++ b/arch/powerpc/mm/hash_low_64.S
@@ -0,0 +1,847 @@
+/*
+ * ppc64 MMU hashtable management routines
+ *
+ * (c) Copyright IBM Corp. 2003, 2005
+ *
+ * Maintained by: Benjamin Herrenschmidt
+ *                <benh@kernel.crashing.org>
+ *
+ * This file is covered by the GNU Public Licence v2 as
+ * described in the kernel's COPYING file.
+ */
+
+#include <linux/config.h>
+#include <asm/reg.h>
+#include <asm/pgtable.h>
+#include <asm/mmu.h>
+#include <asm/page.h>
+#include <asm/types.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/cputable.h>
+
+	.text
+
+/*
+ * Stackframe:
+ *		
+ *         +-> Back chain			(SP + 256)
+ *         |   General register save area	(SP + 112)
+ *         |   Parameter save area		(SP + 48)
+ *         |   TOC save area			(SP + 40)
+ *         |   link editor doubleword		(SP + 32)
+ *         |   compiler doubleword		(SP + 24)
+ *         |   LR save area			(SP + 16)
+ *         |   CR save area			(SP + 8)
+ * SP ---> +-- Back chain			(SP + 0)
+ */
+#define STACKFRAMESIZE	256
+
+/* Save parameters offsets */
+#define STK_PARM(i)	(STACKFRAMESIZE + 48 + ((i)-3)*8)
+
+/* Save non-volatile offsets */
+#define STK_REG(i)	(112 + ((i)-14)*8)
+
+
+#ifndef CONFIG_PPC_64K_PAGES
+
+/*****************************************************************************
+ *                                                                           *
+ *           4K SW & 4K HW pages implementation                              *
+ *                                                                           *
+ *****************************************************************************/
+
+
+/*
+ * _hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
+ *		 pte_t *ptep, unsigned long trap, int local)
+ *
+ * Adds a 4K page to the hash table in a segment of 4K pages only
+ */
+
+_GLOBAL(__hash_page_4K)
+	mflr	r0
+	std	r0,16(r1)
+	stdu	r1,-STACKFRAMESIZE(r1)
+	/* Save all params that we need after a function call */
+	std	r6,STK_PARM(r6)(r1)
+	std	r8,STK_PARM(r8)(r1)
+	
+	/* Add _PAGE_PRESENT to access */
+	ori	r4,r4,_PAGE_PRESENT
+
+	/* Save non-volatile registers.
+	 * r31 will hold "old PTE"
+	 * r30 is "new PTE"
+	 * r29 is "va"
+	 * r28 is a hash value
+	 * r27 is hashtab mask (maybe dynamic patched instead ?)
+	 */
+	std	r27,STK_REG(r27)(r1)
+	std	r28,STK_REG(r28)(r1)
+	std	r29,STK_REG(r29)(r1)
+	std	r30,STK_REG(r30)(r1)
+	std	r31,STK_REG(r31)(r1)
+	
+	/* Step 1:
+	 *
+	 * Check permissions, atomically mark the linux PTE busy
+	 * and hashed.
+	 */ 
+1:
+	ldarx	r31,0,r6
+	/* Check access rights (access & ~(pte_val(*ptep))) */
+	andc.	r0,r4,r31
+	bne-	htab_wrong_access
+	/* Check if PTE is busy */
+	andi.	r0,r31,_PAGE_BUSY
+	/* If so, just bail out and refault if needed. Someone else
+	 * is changing this PTE anyway and might hash it.
+	 */
+	bne-	htab_bail_ok
+
+	/* Prepare new PTE value (turn access RW into DIRTY, then
+	 * add BUSY,HASHPTE and ACCESSED)
+	 */
+	rlwinm	r30,r4,32-9+7,31-7,31-7	/* _PAGE_RW -> _PAGE_DIRTY */
+	or	r30,r30,r31
+	ori	r30,r30,_PAGE_BUSY | _PAGE_ACCESSED | _PAGE_HASHPTE
+	/* Write the linux PTE atomically (setting busy) */
+	stdcx.	r30,0,r6
+	bne-	1b
+	isync
+
+	/* Step 2:
+	 *
+	 * Insert/Update the HPTE in the hash table. At this point,
+	 * r4 (access) is re-useable, we use it for the new HPTE flags
+	 */
+
+	/* Calc va and put it in r29 */
+	rldicr	r29,r5,28,63-28
+	rldicl	r3,r3,0,36
+	or	r29,r3,r29
+
+	/* Calculate hash value for primary slot and store it in r28 */
+	rldicl	r5,r5,0,25		/* vsid & 0x0000007fffffffff */
+	rldicl	r0,r3,64-12,48		/* (ea >> 12) & 0xffff */
+	xor	r28,r5,r0
+
+	/* Convert linux PTE bits into HW equivalents */
+	andi.	r3,r30,0x1fe		/* Get basic set of flags */
+	xori	r3,r3,HPTE_R_N		/* _PAGE_EXEC -> NOEXEC */
+	rlwinm	r0,r30,32-9+1,30,30	/* _PAGE_RW -> _PAGE_USER (r0) */
+	rlwinm	r4,r30,32-7+1,30,30	/* _PAGE_DIRTY -> _PAGE_USER (r4) */
+	and	r0,r0,r4		/* _PAGE_RW & _PAGE_DIRTY ->r0 bit 30*/
+	andc	r0,r30,r0		/* r0 = pte & ~r0 */
+	rlwimi	r3,r0,32-1,31,31	/* Insert result into PP lsb */
+
+	/* We eventually do the icache sync here (maybe inline that
+	 * code rather than call a C function...) 
+	 */
+BEGIN_FTR_SECTION
+	mr	r4,r30
+	mr	r5,r7
+	bl	.hash_page_do_lazy_icache
+END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
+
+	/* At this point, r3 contains new PP bits, save them in
+	 * place of "access" in the param area (sic)
+	 */
+	std	r3,STK_PARM(r4)(r1)
+
+	/* Get htab_hash_mask */
+	ld	r4,htab_hash_mask@got(2)
+	ld	r27,0(r4)	/* htab_hash_mask -> r27 */
+
+	/* Check if we may already be in the hashtable, in this case, we
+	 * go to out-of-line code to try to modify the HPTE
+	 */
+	andi.	r0,r31,_PAGE_HASHPTE
+	bne	htab_modify_pte
+
+htab_insert_pte:
+	/* Clear hpte bits in new pte (we also clear BUSY btw) and
+	 * add _PAGE_HASHPTE
+	 */
+	lis	r0,_PAGE_HPTEFLAGS@h
+	ori	r0,r0,_PAGE_HPTEFLAGS@l
+	andc	r30,r30,r0
+	ori	r30,r30,_PAGE_HASHPTE
+
+	/* physical address r5 */
+	rldicl	r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT
+	sldi	r5,r5,PAGE_SHIFT
+
+	/* Calculate primary group hash */
+	and	r0,r28,r27
+	rldicr	r3,r0,3,63-3		/* r3 = (hash & mask) << 3 */
+
+	/* Call ppc_md.hpte_insert */
+	ld	r6,STK_PARM(r4)(r1)	/* Retreive new pp bits */
+	mr	r4,r29			/* Retreive va */
+	li	r7,0			/* !bolted, !secondary */
+	li	r8,MMU_PAGE_4K		/* page size */
+_GLOBAL(htab_call_hpte_insert1)
+	bl	.			/* Patched by htab_finish_init() */
+	cmpdi	0,r3,0
+	bge	htab_pte_insert_ok	/* Insertion successful */
+	cmpdi	0,r3,-2			/* Critical failure */
+	beq-	htab_pte_insert_failure
+
+	/* Now try secondary slot */
+	
+	/* physical address r5 */
+	rldicl	r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT
+	sldi	r5,r5,PAGE_SHIFT
+
+	/* Calculate secondary group hash */
+	andc	r0,r27,r28
+	rldicr	r3,r0,3,63-3	/* r0 = (~hash & mask) << 3 */
+	
+	/* Call ppc_md.hpte_insert */
+	ld	r6,STK_PARM(r4)(r1)	/* Retreive new pp bits */
+	mr	r4,r29			/* Retreive va */
+	li	r7,HPTE_V_SECONDARY	/* !bolted, secondary */
+	li	r8,MMU_PAGE_4K		/* page size */
+_GLOBAL(htab_call_hpte_insert2)
+	bl	.			/* Patched by htab_finish_init() */
+	cmpdi	0,r3,0
+	bge+	htab_pte_insert_ok	/* Insertion successful */
+	cmpdi	0,r3,-2			/* Critical failure */
+	beq-	htab_pte_insert_failure
+
+	/* Both are full, we need to evict something */
+	mftb	r0
+	/* Pick a random group based on TB */
+	andi.	r0,r0,1
+	mr	r5,r28
+	bne	2f
+	not	r5,r5
+2:	and	r0,r5,r27
+	rldicr	r3,r0,3,63-3	/* r0 = (hash & mask) << 3 */	
+	/* Call ppc_md.hpte_remove */
+_GLOBAL(htab_call_hpte_remove)
+	bl	.			/* Patched by htab_finish_init() */
+
+	/* Try all again */
+	b	htab_insert_pte	
+
+htab_bail_ok:
+	li	r3,0
+	b	htab_bail
+
+htab_pte_insert_ok:
+	/* Insert slot number & secondary bit in PTE */
+	rldimi	r30,r3,12,63-15
+		
+	/* Write out the PTE with a normal write
+	 * (maybe add eieio may be good still ?)
+	 */
+htab_write_out_pte:
+	ld	r6,STK_PARM(r6)(r1)
+	std	r30,0(r6)
+	li	r3, 0
+htab_bail:
+	ld	r27,STK_REG(r27)(r1)
+	ld	r28,STK_REG(r28)(r1)
+	ld	r29,STK_REG(r29)(r1)
+	ld      r30,STK_REG(r30)(r1)
+	ld      r31,STK_REG(r31)(r1)
+	addi    r1,r1,STACKFRAMESIZE
+	ld      r0,16(r1)
+	mtlr    r0
+	blr
+
+htab_modify_pte:
+	/* Keep PP bits in r4 and slot idx from the PTE around in r3 */
+	mr	r4,r3
+	rlwinm	r3,r31,32-12,29,31
+
+	/* Secondary group ? if yes, get a inverted hash value */
+	mr	r5,r28
+	andi.	r0,r31,_PAGE_SECONDARY
+	beq	1f
+	not	r5,r5
+1:
+	/* Calculate proper slot value for ppc_md.hpte_updatepp */
+	and	r0,r5,r27
+	rldicr	r0,r0,3,63-3	/* r0 = (hash & mask) << 3 */
+	add	r3,r0,r3	/* add slot idx */
+
+	/* Call ppc_md.hpte_updatepp */
+	mr	r5,r29			/* va */
+	li	r6,MMU_PAGE_4K		/* page size */
+	ld	r7,STK_PARM(r8)(r1)	/* get "local" param */
+_GLOBAL(htab_call_hpte_updatepp)
+	bl	.			/* Patched by htab_finish_init() */
+
+	/* if we failed because typically the HPTE wasn't really here
+	 * we try an insertion. 
+	 */
+	cmpdi	0,r3,-1
+	beq-	htab_insert_pte
+
+	/* Clear the BUSY bit and Write out the PTE */
+	li	r0,_PAGE_BUSY
+	andc	r30,r30,r0
+	b	htab_write_out_pte
+
+htab_wrong_access:
+	/* Bail out clearing reservation */
+	stdcx.	r31,0,r6
+	li	r3,1
+	b	htab_bail
+
+htab_pte_insert_failure:
+	/* Bail out restoring old PTE */
+	ld	r6,STK_PARM(r6)(r1)
+	std	r31,0(r6)
+	li	r3,-1
+	b	htab_bail
+
+
+#else /* CONFIG_PPC_64K_PAGES */
+
+
+/*****************************************************************************
+ *                                                                           *
+ *           64K SW & 4K or 64K HW in a 4K segment pages implementation      *
+ *                                                                           *
+ *****************************************************************************/
+
+/* _hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
+ *		 pte_t *ptep, unsigned long trap, int local)
+ */
+
+/*
+ * For now, we do NOT implement Admixed pages
+ */
+_GLOBAL(__hash_page_4K)
+	mflr	r0
+	std	r0,16(r1)
+	stdu	r1,-STACKFRAMESIZE(r1)
+	/* Save all params that we need after a function call */
+	std	r6,STK_PARM(r6)(r1)
+	std	r8,STK_PARM(r8)(r1)
+
+	/* Add _PAGE_PRESENT to access */
+	ori	r4,r4,_PAGE_PRESENT
+
+	/* Save non-volatile registers.
+	 * r31 will hold "old PTE"
+	 * r30 is "new PTE"
+	 * r29 is "va"
+	 * r28 is a hash value
+	 * r27 is hashtab mask (maybe dynamic patched instead ?)
+	 * r26 is the hidx mask
+	 * r25 is the index in combo page
+	 */
+	std	r25,STK_REG(r25)(r1)
+	std	r26,STK_REG(r26)(r1)
+	std	r27,STK_REG(r27)(r1)
+	std	r28,STK_REG(r28)(r1)
+	std	r29,STK_REG(r29)(r1)
+	std	r30,STK_REG(r30)(r1)
+	std	r31,STK_REG(r31)(r1)
+
+	/* Step 1:
+	 *
+	 * Check permissions, atomically mark the linux PTE busy
+	 * and hashed.
+	 */
+1:
+	ldarx	r31,0,r6
+	/* Check access rights (access & ~(pte_val(*ptep))) */
+	andc.	r0,r4,r31
+	bne-	htab_wrong_access
+	/* Check if PTE is busy */
+	andi.	r0,r31,_PAGE_BUSY
+	/* If so, just bail out and refault if needed. Someone else
+	 * is changing this PTE anyway and might hash it.
+	 */
+	bne-	htab_bail_ok
+	/* Prepare new PTE value (turn access RW into DIRTY, then
+	 * add BUSY and ACCESSED)
+	 */
+	rlwinm	r30,r4,32-9+7,31-7,31-7	/* _PAGE_RW -> _PAGE_DIRTY */
+	or	r30,r30,r31
+	ori	r30,r30,_PAGE_BUSY | _PAGE_ACCESSED | _PAGE_HASHPTE
+	/* Write the linux PTE atomically (setting busy) */
+	stdcx.	r30,0,r6
+	bne-	1b
+	isync
+
+	/* Step 2:
+	 *
+	 * Insert/Update the HPTE in the hash table. At this point,
+	 * r4 (access) is re-useable, we use it for the new HPTE flags
+	 */
+
+	/* Load the hidx index */
+	rldicl	r25,r3,64-12,60
+
+	/* Calc va and put it in r29 */
+	rldicr	r29,r5,28,63-28		/* r29 = (vsid << 28) */
+	rldicl	r3,r3,0,36		/* r3 = (ea & 0x0fffffff) */
+	or	r29,r3,r29		/* r29 = va
+
+	/* Calculate hash value for primary slot and store it in r28 */
+	rldicl	r5,r5,0,25		/* vsid & 0x0000007fffffffff */
+	rldicl	r0,r3,64-12,48		/* (ea >> 12) & 0xffff */
+	xor	r28,r5,r0
+
+	/* Convert linux PTE bits into HW equivalents */
+	andi.	r3,r30,0x1fe		/* Get basic set of flags */
+	xori	r3,r3,HPTE_R_N		/* _PAGE_EXEC -> NOEXEC */
+	rlwinm	r0,r30,32-9+1,30,30	/* _PAGE_RW -> _PAGE_USER (r0) */
+	rlwinm	r4,r30,32-7+1,30,30	/* _PAGE_DIRTY -> _PAGE_USER (r4) */
+	and	r0,r0,r4		/* _PAGE_RW & _PAGE_DIRTY ->r0 bit 30*/
+	andc	r0,r30,r0		/* r0 = pte & ~r0 */
+	rlwimi	r3,r0,32-1,31,31	/* Insert result into PP lsb */
+
+	/* We eventually do the icache sync here (maybe inline that
+	 * code rather than call a C function...)
+	 */
+BEGIN_FTR_SECTION
+	mr	r4,r30
+	mr	r5,r7
+	bl	.hash_page_do_lazy_icache
+END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
+
+	/* At this point, r3 contains new PP bits, save them in
+	 * place of "access" in the param area (sic)
+	 */
+	std	r3,STK_PARM(r4)(r1)
+
+	/* Get htab_hash_mask */
+	ld	r4,htab_hash_mask@got(2)
+	ld	r27,0(r4)	/* htab_hash_mask -> r27 */
+
+	/* Check if we may already be in the hashtable, in this case, we
+	 * go to out-of-line code to try to modify the HPTE. We look for
+	 * the bit at (1 >> (index + 32))
+	 */
+	andi.	r0,r31,_PAGE_HASHPTE
+	li	r26,0			/* Default hidx */
+	beq	htab_insert_pte
+	ld	r6,STK_PARM(r6)(r1)
+	ori	r26,r6,0x8000		/* Load the hidx mask */
+	ld	r26,0(r26)
+	addi	r5,r25,36		/* Check actual HPTE_SUB bit, this */
+	rldcr.	r0,r31,r5,0		/* must match pgtable.h definition */
+	bne	htab_modify_pte
+
+htab_insert_pte:
+	/* real page number in r5, PTE RPN value + index */
+	rldicl	r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT
+	sldi	r5,r5,PAGE_SHIFT-HW_PAGE_SHIFT
+	add	r5,r5,r25
+	sldi	r5,r5,HW_PAGE_SHIFT
+
+	/* Calculate primary group hash */
+	and	r0,r28,r27
+	rldicr	r3,r0,3,63-3		/* r0 = (hash & mask) << 3 */
+
+	/* Call ppc_md.hpte_insert */
+	ld	r6,STK_PARM(r4)(r1)	/* Retreive new pp bits */
+	mr	r4,r29			/* Retreive va */
+	li	r7,0			/* !bolted, !secondary */
+	li	r8,MMU_PAGE_4K		/* page size */
+_GLOBAL(htab_call_hpte_insert1)
+	bl	.			/* patched by htab_finish_init() */
+	cmpdi	0,r3,0
+	bge	htab_pte_insert_ok	/* Insertion successful */
+	cmpdi	0,r3,-2			/* Critical failure */
+	beq-	htab_pte_insert_failure
+
+	/* Now try secondary slot */
+
+	/* real page number in r5, PTE RPN value + index */
+	rldicl	r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT
+	sldi	r5,r5,PAGE_SHIFT-HW_PAGE_SHIFT
+	add	r5,r5,r25
+	sldi	r5,r5,HW_PAGE_SHIFT
+
+	/* Calculate secondary group hash */
+	andc	r0,r27,r28
+	rldicr	r3,r0,3,63-3		/* r0 = (~hash & mask) << 3 */
+
+	/* Call ppc_md.hpte_insert */
+	ld	r6,STK_PARM(r4)(r1)	/* Retreive new pp bits */
+	mr	r4,r29			/* Retreive va */
+	li	r7,HPTE_V_SECONDARY	/* !bolted, secondary */
+	li	r8,MMU_PAGE_4K		/* page size */
+_GLOBAL(htab_call_hpte_insert2)
+	bl	.			/* patched by htab_finish_init() */
+	cmpdi	0,r3,0
+	bge+	htab_pte_insert_ok	/* Insertion successful */
+	cmpdi	0,r3,-2			/* Critical failure */
+	beq-	htab_pte_insert_failure
+
+	/* Both are full, we need to evict something */
+	mftb	r0
+	/* Pick a random group based on TB */
+	andi.	r0,r0,1
+	mr	r5,r28
+	bne	2f
+	not	r5,r5
+2:	and	r0,r5,r27
+	rldicr	r3,r0,3,63-3		/* r0 = (hash & mask) << 3 */
+	/* Call ppc_md.hpte_remove */
+_GLOBAL(htab_call_hpte_remove)
+	bl	.			/* patched by htab_finish_init() */
+
+	/* Try all again */
+	b	htab_insert_pte
+
+htab_bail_ok:
+	li	r3,0
+	b	htab_bail
+
+htab_pte_insert_ok:
+	/* Insert slot number & secondary bit in PTE second half,
+	 * clear _PAGE_BUSY and set approriate HPTE slot bit
+	 */
+	ld	r6,STK_PARM(r6)(r1)
+	li	r0,_PAGE_BUSY
+	andc	r30,r30,r0
+	/* HPTE SUB bit */
+	li	r0,1
+	subfic	r5,r25,27		/* Must match bit position in */
+	sld	r0,r0,r5		/* pgtable.h */
+	or	r30,r30,r0
+	/* hindx */
+	sldi	r5,r25,2
+	sld	r3,r3,r5
+	li	r4,0xf
+	sld	r4,r4,r5
+	andc	r26,r26,r4
+	or	r26,r26,r3
+	ori	r5,r6,0x8000
+	std	r26,0(r5)
+	lwsync
+	std	r30,0(r6)
+	li	r3, 0
+htab_bail:
+	ld	r25,STK_REG(r25)(r1)
+	ld	r26,STK_REG(r26)(r1)
+	ld	r27,STK_REG(r27)(r1)
+	ld	r28,STK_REG(r28)(r1)
+	ld	r29,STK_REG(r29)(r1)
+	ld      r30,STK_REG(r30)(r1)
+	ld      r31,STK_REG(r31)(r1)
+	addi    r1,r1,STACKFRAMESIZE
+	ld      r0,16(r1)
+	mtlr    r0
+	blr
+
+htab_modify_pte:
+	/* Keep PP bits in r4 and slot idx from the PTE around in r3 */
+	mr	r4,r3
+	sldi	r5,r25,2
+	srd	r3,r26,r5
+
+	/* Secondary group ? if yes, get a inverted hash value */
+	mr	r5,r28
+	andi.	r0,r3,0x8 /* page secondary ? */
+	beq	1f
+	not	r5,r5
+1:	andi.	r3,r3,0x7 /* extract idx alone */
+
+	/* Calculate proper slot value for ppc_md.hpte_updatepp */
+	and	r0,r5,r27
+	rldicr	r0,r0,3,63-3	/* r0 = (hash & mask) << 3 */
+	add	r3,r0,r3	/* add slot idx */
+
+	/* Call ppc_md.hpte_updatepp */
+	mr	r5,r29			/* va */
+	li	r6,MMU_PAGE_4K		/* page size */
+	ld	r7,STK_PARM(r8)(r1)	/* get "local" param */
+_GLOBAL(htab_call_hpte_updatepp)
+	bl	.			/* patched by htab_finish_init() */
+
+	/* if we failed because typically the HPTE wasn't really here
+	 * we try an insertion.
+	 */
+	cmpdi	0,r3,-1
+	beq-	htab_insert_pte
+
+	/* Clear the BUSY bit and Write out the PTE */
+	li	r0,_PAGE_BUSY
+	andc	r30,r30,r0
+	ld	r6,STK_PARM(r6)(r1)
+	std	r30,0(r6)
+	li	r3,0
+	b	htab_bail
+
+htab_wrong_access:
+	/* Bail out clearing reservation */
+	stdcx.	r31,0,r6
+	li	r3,1
+	b	htab_bail
+
+htab_pte_insert_failure:
+	/* Bail out restoring old PTE */
+	ld	r6,STK_PARM(r6)(r1)
+	std	r31,0(r6)
+	li	r3,-1
+	b	htab_bail
+
+
+/*****************************************************************************
+ *                                                                           *
+ *           64K SW & 64K HW in a 64K segment pages implementation           *
+ *                                                                           *
+ *****************************************************************************/
+
+_GLOBAL(__hash_page_64K)
+	mflr	r0
+	std	r0,16(r1)
+	stdu	r1,-STACKFRAMESIZE(r1)
+	/* Save all params that we need after a function call */
+	std	r6,STK_PARM(r6)(r1)
+	std	r8,STK_PARM(r8)(r1)
+
+	/* Add _PAGE_PRESENT to access */
+	ori	r4,r4,_PAGE_PRESENT
+
+	/* Save non-volatile registers.
+	 * r31 will hold "old PTE"
+	 * r30 is "new PTE"
+	 * r29 is "va"
+	 * r28 is a hash value
+	 * r27 is hashtab mask (maybe dynamic patched instead ?)
+	 */
+	std	r27,STK_REG(r27)(r1)
+	std	r28,STK_REG(r28)(r1)
+	std	r29,STK_REG(r29)(r1)
+	std	r30,STK_REG(r30)(r1)
+	std	r31,STK_REG(r31)(r1)
+
+	/* Step 1:
+	 *
+	 * Check permissions, atomically mark the linux PTE busy
+	 * and hashed.
+	 */
+1:
+	ldarx	r31,0,r6
+	/* Check access rights (access & ~(pte_val(*ptep))) */
+	andc.	r0,r4,r31
+	bne-	ht64_wrong_access
+	/* Check if PTE is busy */
+	andi.	r0,r31,_PAGE_BUSY
+	/* If so, just bail out and refault if needed. Someone else
+	 * is changing this PTE anyway and might hash it.
+	 */
+	bne-	ht64_bail_ok
+	/* Prepare new PTE value (turn access RW into DIRTY, then
+	 * add BUSY,HASHPTE and ACCESSED)
+	 */
+	rlwinm	r30,r4,32-9+7,31-7,31-7	/* _PAGE_RW -> _PAGE_DIRTY */
+	or	r30,r30,r31
+	ori	r30,r30,_PAGE_BUSY | _PAGE_ACCESSED | _PAGE_HASHPTE
+	/* Write the linux PTE atomically (setting busy) */
+	stdcx.	r30,0,r6
+	bne-	1b
+	isync
+
+	/* Step 2:
+	 *
+	 * Insert/Update the HPTE in the hash table. At this point,
+	 * r4 (access) is re-useable, we use it for the new HPTE flags
+	 */
+
+	/* Calc va and put it in r29 */
+	rldicr	r29,r5,28,63-28
+	rldicl	r3,r3,0,36
+	or	r29,r3,r29
+
+	/* Calculate hash value for primary slot and store it in r28 */
+	rldicl	r5,r5,0,25		/* vsid & 0x0000007fffffffff */
+	rldicl	r0,r3,64-16,52		/* (ea >> 16) & 0xfff */
+	xor	r28,r5,r0
+
+	/* Convert linux PTE bits into HW equivalents */
+	andi.	r3,r30,0x1fe		/* Get basic set of flags */
+	xori	r3,r3,HPTE_R_N		/* _PAGE_EXEC -> NOEXEC */
+	rlwinm	r0,r30,32-9+1,30,30	/* _PAGE_RW -> _PAGE_USER (r0) */
+	rlwinm	r4,r30,32-7+1,30,30	/* _PAGE_DIRTY -> _PAGE_USER (r4) */
+	and	r0,r0,r4		/* _PAGE_RW & _PAGE_DIRTY ->r0 bit 30*/
+	andc	r0,r30,r0		/* r0 = pte & ~r0 */
+	rlwimi	r3,r0,32-1,31,31	/* Insert result into PP lsb */
+
+	/* We eventually do the icache sync here (maybe inline that
+	 * code rather than call a C function...)
+	 */
+BEGIN_FTR_SECTION
+	mr	r4,r30
+	mr	r5,r7
+	bl	.hash_page_do_lazy_icache
+END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
+
+	/* At this point, r3 contains new PP bits, save them in
+	 * place of "access" in the param area (sic)
+	 */
+	std	r3,STK_PARM(r4)(r1)
+
+	/* Get htab_hash_mask */
+	ld	r4,htab_hash_mask@got(2)
+	ld	r27,0(r4)	/* htab_hash_mask -> r27 */
+
+	/* Check if we may already be in the hashtable, in this case, we
+	 * go to out-of-line code to try to modify the HPTE
+	 */
+	andi.	r0,r31,_PAGE_HASHPTE
+	bne	ht64_modify_pte
+
+ht64_insert_pte:
+	/* Clear hpte bits in new pte (we also clear BUSY btw) and
+	 * add _PAGE_HASHPTE
+	 */
+	lis	r0,_PAGE_HPTEFLAGS@h
+	ori	r0,r0,_PAGE_HPTEFLAGS@l
+	andc	r30,r30,r0
+	ori	r30,r30,_PAGE_HASHPTE
+
+	/* Phyical address in r5 */
+	rldicl	r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT
+	sldi	r5,r5,PAGE_SHIFT
+
+	/* Calculate primary group hash */
+	and	r0,r28,r27
+	rldicr	r3,r0,3,63-3	/* r0 = (hash & mask) << 3 */
+
+	/* Call ppc_md.hpte_insert */
+	ld	r6,STK_PARM(r4)(r1)	/* Retreive new pp bits */
+	mr	r4,r29			/* Retreive va */
+	li	r7,0			/* !bolted, !secondary */
+	li	r8,MMU_PAGE_64K
+_GLOBAL(ht64_call_hpte_insert1)
+	bl	.			/* patched by htab_finish_init() */
+	cmpdi	0,r3,0
+	bge	ht64_pte_insert_ok	/* Insertion successful */
+	cmpdi	0,r3,-2			/* Critical failure */
+	beq-	ht64_pte_insert_failure
+
+	/* Now try secondary slot */
+
+	/* Phyical address in r5 */
+	rldicl	r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT
+	sldi	r5,r5,PAGE_SHIFT
+
+	/* Calculate secondary group hash */
+	andc	r0,r27,r28
+	rldicr	r3,r0,3,63-3	/* r0 = (~hash & mask) << 3 */
+
+	/* Call ppc_md.hpte_insert */
+	ld	r6,STK_PARM(r4)(r1)	/* Retreive new pp bits */
+	mr	r4,r29			/* Retreive va */
+	li	r7,HPTE_V_SECONDARY	/* !bolted, secondary */
+	li	r8,MMU_PAGE_64K
+_GLOBAL(ht64_call_hpte_insert2)
+	bl	.			/* patched by htab_finish_init() */
+	cmpdi	0,r3,0
+	bge+	ht64_pte_insert_ok	/* Insertion successful */
+	cmpdi	0,r3,-2			/* Critical failure */
+	beq-	ht64_pte_insert_failure
+
+	/* Both are full, we need to evict something */
+	mftb	r0
+	/* Pick a random group based on TB */
+	andi.	r0,r0,1
+	mr	r5,r28
+	bne	2f
+	not	r5,r5
+2:	and	r0,r5,r27
+	rldicr	r3,r0,3,63-3	/* r0 = (hash & mask) << 3 */
+	/* Call ppc_md.hpte_remove */
+_GLOBAL(ht64_call_hpte_remove)
+	bl	.			/* patched by htab_finish_init() */
+
+	/* Try all again */
+	b	ht64_insert_pte
+
+ht64_bail_ok:
+	li	r3,0
+	b	ht64_bail
+
+ht64_pte_insert_ok:
+	/* Insert slot number & secondary bit in PTE */
+	rldimi	r30,r3,12,63-15
+
+	/* Write out the PTE with a normal write
+	 * (maybe add eieio may be good still ?)
+	 */
+ht64_write_out_pte:
+	ld	r6,STK_PARM(r6)(r1)
+	std	r30,0(r6)
+	li	r3, 0
+ht64_bail:
+	ld	r27,STK_REG(r27)(r1)
+	ld	r28,STK_REG(r28)(r1)
+	ld	r29,STK_REG(r29)(r1)
+	ld      r30,STK_REG(r30)(r1)
+	ld      r31,STK_REG(r31)(r1)
+	addi    r1,r1,STACKFRAMESIZE
+	ld      r0,16(r1)
+	mtlr    r0
+	blr
+
+ht64_modify_pte:
+	/* Keep PP bits in r4 and slot idx from the PTE around in r3 */
+	mr	r4,r3
+	rlwinm	r3,r31,32-12,29,31
+
+	/* Secondary group ? if yes, get a inverted hash value */
+	mr	r5,r28
+	andi.	r0,r31,_PAGE_F_SECOND
+	beq	1f
+	not	r5,r5
+1:
+	/* Calculate proper slot value for ppc_md.hpte_updatepp */
+	and	r0,r5,r27
+	rldicr	r0,r0,3,63-3	/* r0 = (hash & mask) << 3 */
+	add	r3,r0,r3	/* add slot idx */
+
+	/* Call ppc_md.hpte_updatepp */
+	mr	r5,r29			/* va */
+	li	r6,MMU_PAGE_64K
+	ld	r7,STK_PARM(r8)(r1)	/* get "local" param */
+_GLOBAL(ht64_call_hpte_updatepp)
+	bl	.			/* patched by htab_finish_init() */
+
+	/* if we failed because typically the HPTE wasn't really here
+	 * we try an insertion.
+	 */
+	cmpdi	0,r3,-1
+	beq-	ht64_insert_pte
+
+	/* Clear the BUSY bit and Write out the PTE */
+	li	r0,_PAGE_BUSY
+	andc	r30,r30,r0
+	b	ht64_write_out_pte
+
+ht64_wrong_access:
+	/* Bail out clearing reservation */
+	stdcx.	r31,0,r6
+	li	r3,1
+	b	ht64_bail
+
+ht64_pte_insert_failure:
+	/* Bail out restoring old PTE */
+	ld	r6,STK_PARM(r6)(r1)
+	std	r31,0(r6)
+	li	r3,-1
+	b	ht64_bail
+
+
+#endif /* CONFIG_PPC_64K_PAGES */
+
+
+/*****************************************************************************
+ *                                                                           *
+ *           Huge pages implementation is in hugetlbpage.c                   *
+ *                                                                           *
+ *****************************************************************************/
diff --git a/arch/ppc64/mm/hash_native.c b/arch/powerpc/mm/hash_native_64.c
index 7626bb59954d..d96bcfe4c6f6 100644
--- a/arch/ppc64/mm/hash_native.c
+++ b/arch/powerpc/mm/hash_native_64.c
@@ -9,6 +9,9 @@
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */
+
+#undef DEBUG_LOW
+
 #include <linux/spinlock.h>
 #include <linux/bitops.h>
 #include <linux/threads.h>
@@ -22,11 +25,84 @@
 #include <asm/tlbflush.h>
 #include <asm/tlb.h>
 #include <asm/cputable.h>
+#include <asm/udbg.h>
+
+#ifdef DEBUG_LOW
+#define DBG_LOW(fmt...) udbg_printf(fmt)
+#else
+#define DBG_LOW(fmt...)
+#endif
 
 #define HPTE_LOCK_BIT 3
 
 static DEFINE_SPINLOCK(native_tlbie_lock);
 
+static inline void __tlbie(unsigned long va, unsigned int psize)
+{
+	unsigned int penc;
+
+	/* clear top 16 bits, non SLS segment */
+	va &= ~(0xffffULL << 48);
+
+	switch (psize) {
+	case MMU_PAGE_4K:
+		va &= ~0xffful;
+		asm volatile("tlbie %0,0" : : "r" (va) : "memory");
+		break;
+	default:
+		penc = mmu_psize_defs[psize].penc;
+		va &= ~((1ul << mmu_psize_defs[psize].shift) - 1);
+		va |= (0x7f >> (8 - penc)) << 12;
+		asm volatile("tlbie %0,1" : : "r" (va) : "memory");
+		break;
+	}
+}
+
+static inline void __tlbiel(unsigned long va, unsigned int psize)
+{
+	unsigned int penc;
+
+	/* clear top 16 bits, non SLS segment */
+	va &= ~(0xffffULL << 48);
+
+	switch (psize) {
+	case MMU_PAGE_4K:
+		va &= ~0xffful;
+		asm volatile(".long 0x7c000224 | (%0 << 11) | (0 << 21)"
+			     : : "r"(va) : "memory");
+		break;
+	default:
+		penc = mmu_psize_defs[psize].penc;
+		va &= ~((1ul << mmu_psize_defs[psize].shift) - 1);
+		va |= (0x7f >> (8 - penc)) << 12;
+		asm volatile(".long 0x7c000224 | (%0 << 11) | (1 << 21)"
+			     : : "r"(va) : "memory");
+		break;
+	}
+
+}
+
+static inline void tlbie(unsigned long va, int psize, int local)
+{
+	unsigned int use_local = local && cpu_has_feature(CPU_FTR_TLBIEL);
+	int lock_tlbie = !cpu_has_feature(CPU_FTR_LOCKLESS_TLBIE);
+
+	if (use_local)
+		use_local = mmu_psize_defs[psize].tlbiel;
+	if (lock_tlbie && !use_local)
+		spin_lock(&native_tlbie_lock);
+	asm volatile("ptesync": : :"memory");
+	if (use_local) {
+		__tlbiel(va, psize);
+		asm volatile("ptesync": : :"memory");
+	} else {
+		__tlbie(va, psize);
+		asm volatile("eieio; tlbsync; ptesync": : :"memory");
+	}
+	if (lock_tlbie && !use_local)
+		spin_unlock(&native_tlbie_lock);
+}
+
 static inline void native_lock_hpte(hpte_t *hptep)
 {
 	unsigned long *word = &hptep->v;
@@ -48,13 +124,19 @@ static inline void native_unlock_hpte(hpte_t *hptep)
 }
 
 long native_hpte_insert(unsigned long hpte_group, unsigned long va,
-			unsigned long prpn, unsigned long vflags,
-			unsigned long rflags)
+			unsigned long pa, unsigned long rflags,
+			unsigned long vflags, int psize)
 {
 	hpte_t *hptep = htab_address + hpte_group;
 	unsigned long hpte_v, hpte_r;
 	int i;
 
+	if (!(vflags & HPTE_V_BOLTED)) {
+		DBG_LOW("    insert(group=%lx, va=%016lx, pa=%016lx,"
+			" rflags=%lx, vflags=%lx, psize=%d)\n",
+			hpte_group, va, pa, rflags, vflags, psize);
+	}
+
 	for (i = 0; i < HPTES_PER_GROUP; i++) {
 		if (! (hptep->v & HPTE_V_VALID)) {
 			/* retry with lock held */
@@ -70,10 +152,13 @@ long native_hpte_insert(unsigned long hpte_group, unsigned long va,
 	if (i == HPTES_PER_GROUP)
 		return -1;
 
-	hpte_v = (va >> 23) << HPTE_V_AVPN_SHIFT | vflags | HPTE_V_VALID;
-	if (vflags & HPTE_V_LARGE)
-		va &= ~(1UL << HPTE_V_AVPN_SHIFT);
-	hpte_r = (prpn << HPTE_R_RPN_SHIFT) | rflags;
+	hpte_v = hpte_encode_v(va, psize) | vflags | HPTE_V_VALID;
+	hpte_r = hpte_encode_r(pa, psize) | rflags;
+
+	if (!(vflags & HPTE_V_BOLTED)) {
+		DBG_LOW(" i=%x hpte_v=%016lx, hpte_r=%016lx\n",
+			i, hpte_v, hpte_r);
+	}
 
 	hptep->r = hpte_r;
 	/* Guarantee the second dword is visible before the valid bit */
@@ -96,6 +181,8 @@ static long native_hpte_remove(unsigned long hpte_group)
 	int slot_offset;
 	unsigned long hpte_v;
 
+	DBG_LOW("    remove(group=%lx)\n", hpte_group);
+
 	/* pick a random entry to start at */
 	slot_offset = mftb() & 0x7;
 
@@ -126,34 +213,51 @@ static long native_hpte_remove(unsigned long hpte_group)
 	return i;
 }
 
-static inline void set_pp_bit(unsigned long pp, hpte_t *addr)
+static long native_hpte_updatepp(unsigned long slot, unsigned long newpp,
+				 unsigned long va, int psize, int local)
 {
-	unsigned long old;
-	unsigned long *p = &addr->r;
-
-	__asm__ __volatile__(
-	"1:	ldarx	%0,0,%3\n\
-		rldimi	%0,%2,0,61\n\
-		stdcx.	%0,0,%3\n\
-		bne	1b"
-	: "=&r" (old), "=m" (*p)
-	: "r" (pp), "r" (p), "m" (*p)
-	: "cc");
+	hpte_t *hptep = htab_address + slot;
+	unsigned long hpte_v, want_v;
+	int ret = 0;
+
+	want_v = hpte_encode_v(va, psize);
+
+	DBG_LOW("    update(va=%016lx, avpnv=%016lx, hash=%016lx, newpp=%x)",
+		va, want_v & HPTE_V_AVPN, slot, newpp);
+
+	native_lock_hpte(hptep);
+
+	hpte_v = hptep->v;
+
+	/* Even if we miss, we need to invalidate the TLB */
+	if (!HPTE_V_COMPARE(hpte_v, want_v) || !(hpte_v & HPTE_V_VALID)) {
+		DBG_LOW(" -> miss\n");
+		native_unlock_hpte(hptep);
+		ret = -1;
+	} else {
+		DBG_LOW(" -> hit\n");
+		/* Update the HPTE */
+		hptep->r = (hptep->r & ~(HPTE_R_PP | HPTE_R_N)) |
+			(newpp & (HPTE_R_PP | HPTE_R_N));
+		native_unlock_hpte(hptep);
+	}
+
+	/* Ensure it is out of the tlb too. */
+	tlbie(va, psize, local);
+
+	return ret;
 }
 
-/*
- * Only works on small pages. Yes its ugly to have to check each slot in
- * the group but we only use this during bootup.
- */
-static long native_hpte_find(unsigned long vpn)
+static long native_hpte_find(unsigned long va, int psize)
 {
 	hpte_t *hptep;
 	unsigned long hash;
 	unsigned long i, j;
 	long slot;
-	unsigned long hpte_v;
+	unsigned long want_v, hpte_v;
 
-	hash = hpt_hash(vpn, 0);
+	hash = hpt_hash(va, mmu_psize_defs[psize].shift);
+	want_v = hpte_encode_v(va, psize);
 
 	for (j = 0; j < 2; j++) {
 		slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
@@ -161,7 +265,7 @@ static long native_hpte_find(unsigned long vpn)
 			hptep = htab_address + slot;
 			hpte_v = hptep->v;
 
-			if ((HPTE_V_AVPN_VAL(hpte_v) == (vpn >> 11))
+			if (HPTE_V_COMPARE(hpte_v, want_v)
 			    && (hpte_v & HPTE_V_VALID)
 			    && ( !!(hpte_v & HPTE_V_SECONDARY) == j)) {
 				/* HPTE matches */
@@ -177,127 +281,101 @@ static long native_hpte_find(unsigned long vpn)
 	return -1;
 }
 
-static long native_hpte_updatepp(unsigned long slot, unsigned long newpp,
-				 unsigned long va, int large, int local)
-{
-	hpte_t *hptep = htab_address + slot;
-	unsigned long hpte_v;
-	unsigned long avpn = va >> 23;
-	int ret = 0;
-
-	if (large)
-		avpn &= ~1;
-
-	native_lock_hpte(hptep);
-
-	hpte_v = hptep->v;
-
-	/* Even if we miss, we need to invalidate the TLB */
-	if ((HPTE_V_AVPN_VAL(hpte_v) != avpn)
-	    || !(hpte_v & HPTE_V_VALID)) {
-		native_unlock_hpte(hptep);
-		ret = -1;
-	} else {
-		set_pp_bit(newpp, hptep);
-		native_unlock_hpte(hptep);
-	}
-
-	/* Ensure it is out of the tlb too */
-	if (cpu_has_feature(CPU_FTR_TLBIEL) && !large && local) {
-		tlbiel(va);
-	} else {
-		int lock_tlbie = !cpu_has_feature(CPU_FTR_LOCKLESS_TLBIE);
-
-		if (lock_tlbie)
-			spin_lock(&native_tlbie_lock);
-		tlbie(va, large);
-		if (lock_tlbie)
-			spin_unlock(&native_tlbie_lock);
-	}
-
-	return ret;
-}
-
 /*
  * Update the page protection bits. Intended to be used to create
  * guard pages for kernel data structures on pages which are bolted
  * in the HPT. Assumes pages being operated on will not be stolen.
- * Does not work on large pages.
  *
  * No need to lock here because we should be the only user.
  */
-static void native_hpte_updateboltedpp(unsigned long newpp, unsigned long ea)
+static void native_hpte_updateboltedpp(unsigned long newpp, unsigned long ea,
+				       int psize)
 {
-	unsigned long vsid, va, vpn, flags = 0;
+	unsigned long vsid, va;
 	long slot;
 	hpte_t *hptep;
-	int lock_tlbie = !cpu_has_feature(CPU_FTR_LOCKLESS_TLBIE);
 
 	vsid = get_kernel_vsid(ea);
 	va = (vsid << 28) | (ea & 0x0fffffff);
-	vpn = va >> PAGE_SHIFT;
 
-	slot = native_hpte_find(vpn);
+	slot = native_hpte_find(va, psize);
 	if (slot == -1)
 		panic("could not find page to bolt\n");
 	hptep = htab_address + slot;
 
-	set_pp_bit(newpp, hptep);
+	/* Update the HPTE */
+	hptep->r = (hptep->r & ~(HPTE_R_PP | HPTE_R_N)) |
+		(newpp & (HPTE_R_PP | HPTE_R_N));
 
-	/* Ensure it is out of the tlb too */
-	if (lock_tlbie)
-		spin_lock_irqsave(&native_tlbie_lock, flags);
-	tlbie(va, 0);
-	if (lock_tlbie)
-		spin_unlock_irqrestore(&native_tlbie_lock, flags);
+	/* Ensure it is out of the tlb too. */
+	tlbie(va, psize, 0);
 }
 
 static void native_hpte_invalidate(unsigned long slot, unsigned long va,
-				    int large, int local)
+				   int psize, int local)
 {
 	hpte_t *hptep = htab_address + slot;
 	unsigned long hpte_v;
-	unsigned long avpn = va >> 23;
+	unsigned long want_v;
 	unsigned long flags;
-	int lock_tlbie = !cpu_has_feature(CPU_FTR_LOCKLESS_TLBIE);
-
-	if (large)
-		avpn &= ~1;
 
 	local_irq_save(flags);
-	native_lock_hpte(hptep);
 
+	DBG_LOW("    invalidate(va=%016lx, hash: %x)\n", va, slot);
+
+	want_v = hpte_encode_v(va, psize);
+	native_lock_hpte(hptep);
 	hpte_v = hptep->v;
 
 	/* Even if we miss, we need to invalidate the TLB */
-	if ((HPTE_V_AVPN_VAL(hpte_v) != avpn)
-	    || !(hpte_v & HPTE_V_VALID)) {
+	if (!HPTE_V_COMPARE(hpte_v, want_v) || !(hpte_v & HPTE_V_VALID))
 		native_unlock_hpte(hptep);
-	} else {
+	else
 		/* Invalidate the hpte. NOTE: this also unlocks it */
 		hptep->v = 0;
-	}
 
-	/* Invalidate the tlb */
-	if (cpu_has_feature(CPU_FTR_TLBIEL) && !large && local) {
-		tlbiel(va);
-	} else {
-		if (lock_tlbie)
-			spin_lock(&native_tlbie_lock);
-		tlbie(va, large);
-		if (lock_tlbie)
-			spin_unlock(&native_tlbie_lock);
-	}
+	/* Invalidate the TLB */
+	tlbie(va, psize, local);
+
 	local_irq_restore(flags);
 }
 
 /*
+ * XXX This need fixing based on page size. It's only used by
+ * native_hpte_clear() for now which needs fixing too so they
+ * make a good pair...
+ */
+static unsigned long slot2va(unsigned long hpte_v, unsigned long slot)
+{
+	unsigned long avpn = HPTE_V_AVPN_VAL(hpte_v);
+	unsigned long va;
+
+	va = avpn << 23;
+
+	if (! (hpte_v & HPTE_V_LARGE)) {
+		unsigned long vpi, pteg;
+
+		pteg = slot / HPTES_PER_GROUP;
+		if (hpte_v & HPTE_V_SECONDARY)
+			pteg = ~pteg;
+
+		vpi = ((va >> 28) ^ pteg) & htab_hash_mask;
+
+		va |= vpi << PAGE_SHIFT;
+	}
+
+	return va;
+}
+
+/*
  * clear all mappings on kexec.  All cpus are in real mode (or they will
  * be when they isi), and we are the only one left.  We rely on our kernel
  * mapping being 0xC0's and the hardware ignoring those two real bits.
  *
  * TODO: add batching support when enabled.  remember, no dynamic memory here,
  * athough there is the control page available...
+ *
+ * XXX FIXME: 4k only for now !
  */
 static void native_hpte_clear(void)
 {
@@ -327,7 +405,7 @@ static void native_hpte_clear(void)
 
 		if (hpte_v & HPTE_V_VALID) {
 			hptep->v = 0;
-			tlbie(slot2va(hpte_v, slot), hpte_v & HPTE_V_LARGE);
+			tlbie(slot2va(hpte_v, slot), MMU_PAGE_4K, 0);
 		}
 	}
 
@@ -335,68 +413,59 @@ static void native_hpte_clear(void)
 	local_irq_restore(flags);
 }
 
-static void native_flush_hash_range(unsigned long context,
-				    unsigned long number, int local)
+/*
+ * Batched hash table flush, we batch the tlbie's to avoid taking/releasing
+ * the lock all the time
+ */
+static void native_flush_hash_range(unsigned long number, int local)
 {
-	unsigned long vsid, vpn, va, hash, secondary, slot, flags, avpn;
-	int i, j;
+	unsigned long va, hash, index, hidx, shift, slot;
 	hpte_t *hptep;
 	unsigned long hpte_v;
+	unsigned long want_v;
+	unsigned long flags;
+	real_pte_t pte;
 	struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch);
-
-	/* XXX fix for large ptes */
-	unsigned long large = 0;
+	unsigned long psize = batch->psize;
+	int i;
 
 	local_irq_save(flags);
 
-	j = 0;
 	for (i = 0; i < number; i++) {
-		if (batch->addr[i] < KERNELBASE)
-			vsid = get_vsid(context, batch->addr[i]);
-		else
-			vsid = get_kernel_vsid(batch->addr[i]);
-
-		va = (vsid << 28) | (batch->addr[i] & 0x0fffffff);
-		batch->vaddr[j] = va;
-		if (large)
-			vpn = va >> HPAGE_SHIFT;
-		else
-			vpn = va >> PAGE_SHIFT;
-		hash = hpt_hash(vpn, large);
-		secondary = (pte_val(batch->pte[i]) & _PAGE_SECONDARY) >> 15;
-		if (secondary)
-			hash = ~hash;
-		slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
-		slot += (pte_val(batch->pte[i]) & _PAGE_GROUP_IX) >> 12;
-
-		hptep = htab_address + slot;
-
-		avpn = va >> 23;
-		if (large)
-			avpn &= ~0x1UL;
-
-		native_lock_hpte(hptep);
-
-		hpte_v = hptep->v;
-
-		/* Even if we miss, we need to invalidate the TLB */
-		if ((HPTE_V_AVPN_VAL(hpte_v) != avpn)
-		    || !(hpte_v & HPTE_V_VALID)) {
-			native_unlock_hpte(hptep);
-		} else {
-			/* Invalidate the hpte. NOTE: this also unlocks it */
-			hptep->v = 0;
-		}
-
-		j++;
+		va = batch->vaddr[i];
+		pte = batch->pte[i];
+
+		pte_iterate_hashed_subpages(pte, psize, va, index, shift) {
+			hash = hpt_hash(va, shift);
+			hidx = __rpte_to_hidx(pte, index);
+			if (hidx & _PTEIDX_SECONDARY)
+				hash = ~hash;
+			slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
+			slot += hidx & _PTEIDX_GROUP_IX;
+			hptep = htab_address + slot;
+			want_v = hpte_encode_v(va, psize);
+			native_lock_hpte(hptep);
+			hpte_v = hptep->v;
+			if (!HPTE_V_COMPARE(hpte_v, want_v) ||
+			    !(hpte_v & HPTE_V_VALID))
+				native_unlock_hpte(hptep);
+			else
+				hptep->v = 0;
+		} pte_iterate_hashed_end();
 	}
 
-	if (cpu_has_feature(CPU_FTR_TLBIEL) && !large && local) {
+	if (cpu_has_feature(CPU_FTR_TLBIEL) &&
+	    mmu_psize_defs[psize].tlbiel && local) {
 		asm volatile("ptesync":::"memory");
-
-		for (i = 0; i < j; i++)
-			__tlbiel(batch->vaddr[i]);
-
+		for (i = 0; i < number; i++) {
+			va = batch->vaddr[i];
+			pte = batch->pte[i];
+
+			pte_iterate_hashed_subpages(pte, psize, va, index,
+						    shift) {
+				__tlbiel(va, psize);
+			} pte_iterate_hashed_end();
+		}
 		asm volatile("ptesync":::"memory");
 	} else {
 		int lock_tlbie = !cpu_has_feature(CPU_FTR_LOCKLESS_TLBIE);
@@ -405,10 +474,15 @@ static void native_flush_hash_range(unsigned long context,
 			spin_lock(&native_tlbie_lock);
 
 		asm volatile("ptesync":::"memory");
-
-		for (i = 0; i < j; i++)
-			__tlbie(batch->vaddr[i], 0);
-
+		for (i = 0; i < number; i++) {
+			va = batch->vaddr[i];
+			pte = batch->pte[i];
+
+			pte_iterate_hashed_subpages(pte, psize, va, index,
+						    shift) {
+				__tlbie(va, psize);
+			} pte_iterate_hashed_end();
+		}
 		asm volatile("eieio; tlbsync; ptesync":::"memory");
 
 		if (lock_tlbie)
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
new file mode 100644
index 000000000000..706e8a63ced9
--- /dev/null
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -0,0 +1,775 @@
+/*
+ * PowerPC64 port by Mike Corrigan and Dave Engebretsen
+ *   {mikejc|engebret}@us.ibm.com
+ *
+ *    Copyright (c) 2000 Mike Corrigan <mikejc@us.ibm.com>
+ *
+ * SMP scalability work:
+ *    Copyright (C) 2001 Anton Blanchard <anton@au.ibm.com>, IBM
+ * 
+ *    Module name: htab.c
+ *
+ *    Description:
+ *      PowerPC Hashed Page Table functions
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#undef DEBUG
+#undef DEBUG_LOW
+
+#include <linux/config.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/proc_fs.h>
+#include <linux/stat.h>
+#include <linux/sysctl.h>
+#include <linux/ctype.h>
+#include <linux/cache.h>
+#include <linux/init.h>
+#include <linux/signal.h>
+
+#include <asm/processor.h>
+#include <asm/pgtable.h>
+#include <asm/mmu.h>
+#include <asm/mmu_context.h>
+#include <asm/page.h>
+#include <asm/types.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/machdep.h>
+#include <asm/lmb.h>
+#include <asm/abs_addr.h>
+#include <asm/tlbflush.h>
+#include <asm/io.h>
+#include <asm/eeh.h>
+#include <asm/tlb.h>
+#include <asm/cacheflush.h>
+#include <asm/cputable.h>
+#include <asm/abs_addr.h>
+#include <asm/sections.h>
+
+#ifdef DEBUG
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+#ifdef DEBUG_LOW
+#define DBG_LOW(fmt...) udbg_printf(fmt)
+#else
+#define DBG_LOW(fmt...)
+#endif
+
+#define KB (1024)
+#define MB (1024*KB)
+
+/*
+ * Note:  pte   --> Linux PTE
+ *        HPTE  --> PowerPC Hashed Page Table Entry
+ *
+ * Execution context:
+ *   htab_initialize is called with the MMU off (of course), but
+ *   the kernel has been copied down to zero so it can directly
+ *   reference global data.  At this point it is very difficult
+ *   to print debug info.
+ *
+ */
+
+#ifdef CONFIG_U3_DART
+extern unsigned long dart_tablebase;
+#endif /* CONFIG_U3_DART */
+
+static unsigned long _SDR1;
+struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT];
+
+hpte_t *htab_address;
+unsigned long htab_hash_mask;
+int mmu_linear_psize = MMU_PAGE_4K;
+int mmu_virtual_psize = MMU_PAGE_4K;
+#ifdef CONFIG_HUGETLB_PAGE
+int mmu_huge_psize = MMU_PAGE_16M;
+unsigned int HPAGE_SHIFT;
+#endif
+
+/* There are definitions of page sizes arrays to be used when none
+ * is provided by the firmware.
+ */
+
+/* Pre-POWER4 CPUs (4k pages only)
+ */
+struct mmu_psize_def mmu_psize_defaults_old[] = {
+	[MMU_PAGE_4K] = {
+		.shift	= 12,
+		.sllp	= 0,
+		.penc	= 0,
+		.avpnm	= 0,
+		.tlbiel = 0,
+	},
+};
+
+/* POWER4, GPUL, POWER5
+ *
+ * Support for 16Mb large pages
+ */
+struct mmu_psize_def mmu_psize_defaults_gp[] = {
+	[MMU_PAGE_4K] = {
+		.shift	= 12,
+		.sllp	= 0,
+		.penc	= 0,
+		.avpnm	= 0,
+		.tlbiel = 1,
+	},
+	[MMU_PAGE_16M] = {
+		.shift	= 24,
+		.sllp	= SLB_VSID_L,
+		.penc	= 0,
+		.avpnm	= 0x1UL,
+		.tlbiel = 0,
+	},
+};
+
+
+int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
+		      unsigned long pstart, unsigned long mode, int psize)
+{
+	unsigned long vaddr, paddr;
+	unsigned int step, shift;
+	unsigned long tmp_mode;
+	int ret = 0;
+
+	shift = mmu_psize_defs[psize].shift;
+	step = 1 << shift;
+
+	for (vaddr = vstart, paddr = pstart; vaddr < vend;
+	     vaddr += step, paddr += step) {
+		unsigned long vpn, hash, hpteg;
+		unsigned long vsid = get_kernel_vsid(vaddr);
+		unsigned long va = (vsid << 28) | (vaddr & 0x0fffffff);
+
+		vpn = va >> shift;
+		tmp_mode = mode;
+		
+		/* Make non-kernel text non-executable */
+		if (!in_kernel_text(vaddr))
+			tmp_mode = mode | HPTE_R_N;
+
+		hash = hpt_hash(va, shift);
+		hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);
+
+		/* The crap below can be cleaned once ppd_md.probe() can
+		 * set up the hash callbacks, thus we can just used the
+		 * normal insert callback here.
+		 */
+#ifdef CONFIG_PPC_ISERIES
+		if (_machine == PLATFORM_ISERIES_LPAR)
+			ret = iSeries_hpte_insert(hpteg, va,
+						  virt_to_abs(paddr),
+						  tmp_mode,
+						  HPTE_V_BOLTED,
+						  psize);
+		else
+#endif
+#ifdef CONFIG_PPC_PSERIES
+		if (_machine & PLATFORM_LPAR)
+			ret = pSeries_lpar_hpte_insert(hpteg, va,
+						       virt_to_abs(paddr),
+						       tmp_mode,
+						       HPTE_V_BOLTED,
+						       psize);
+		else
+#endif
+#ifdef CONFIG_PPC_MULTIPLATFORM
+			ret = native_hpte_insert(hpteg, va,
+						 virt_to_abs(paddr),
+						 tmp_mode, HPTE_V_BOLTED,
+						 psize);
+#endif
+		if (ret < 0)
+			break;
+	}
+	return ret < 0 ? ret : 0;
+}
+
+static int __init htab_dt_scan_page_sizes(unsigned long node,
+					  const char *uname, int depth,
+					  void *data)
+{
+	char *type = of_get_flat_dt_prop(node, "device_type", NULL);
+	u32 *prop;
+	unsigned long size = 0;
+
+	/* We are scanning "cpu" nodes only */
+	if (type == NULL || strcmp(type, "cpu") != 0)
+		return 0;
+
+	prop = (u32 *)of_get_flat_dt_prop(node,
+					  "ibm,segment-page-sizes", &size);
+	if (prop != NULL) {
+		DBG("Page sizes from device-tree:\n");
+		size /= 4;
+		cur_cpu_spec->cpu_features &= ~(CPU_FTR_16M_PAGE);
+		while(size > 0) {
+			unsigned int shift = prop[0];
+			unsigned int slbenc = prop[1];
+			unsigned int lpnum = prop[2];
+			unsigned int lpenc = 0;
+			struct mmu_psize_def *def;
+			int idx = -1;
+
+			size -= 3; prop += 3;
+			while(size > 0 && lpnum) {
+				if (prop[0] == shift)
+					lpenc = prop[1];
+				prop += 2; size -= 2;
+				lpnum--;
+			}
+			switch(shift) {
+			case 0xc:
+				idx = MMU_PAGE_4K;
+				break;
+			case 0x10:
+				idx = MMU_PAGE_64K;
+				break;
+			case 0x14:
+				idx = MMU_PAGE_1M;
+				break;
+			case 0x18:
+				idx = MMU_PAGE_16M;
+				cur_cpu_spec->cpu_features |= CPU_FTR_16M_PAGE;
+				break;
+			case 0x22:
+				idx = MMU_PAGE_16G;
+				break;
+			}
+			if (idx < 0)
+				continue;
+			def = &mmu_psize_defs[idx];
+			def->shift = shift;
+			if (shift <= 23)
+				def->avpnm = 0;
+			else
+				def->avpnm = (1 << (shift - 23)) - 1;
+			def->sllp = slbenc;
+			def->penc = lpenc;
+			/* We don't know for sure what's up with tlbiel, so
+			 * for now we only set it for 4K and 64K pages
+			 */
+			if (idx == MMU_PAGE_4K || idx == MMU_PAGE_64K)
+				def->tlbiel = 1;
+			else
+				def->tlbiel = 0;
+
+			DBG(" %d: shift=%02x, sllp=%04x, avpnm=%08x, "
+			    "tlbiel=%d, penc=%d\n",
+			    idx, shift, def->sllp, def->avpnm, def->tlbiel,
+			    def->penc);
+		}
+		return 1;
+	}
+	return 0;
+}
+
+
+static void __init htab_init_page_sizes(void)
+{
+	int rc;
+
+	/* Default to 4K pages only */
+	memcpy(mmu_psize_defs, mmu_psize_defaults_old,
+	       sizeof(mmu_psize_defaults_old));
+
+	/*
+	 * Try to find the available page sizes in the device-tree
+	 */
+	rc = of_scan_flat_dt(htab_dt_scan_page_sizes, NULL);
+	if (rc != 0)  /* Found */
+		goto found;
+
+	/*
+	 * Not in the device-tree, let's fallback on known size
+	 * list for 16M capable GP & GR
+	 */
+	if ((_machine != PLATFORM_ISERIES_LPAR) &&
+	    cpu_has_feature(CPU_FTR_16M_PAGE))
+		memcpy(mmu_psize_defs, mmu_psize_defaults_gp,
+		       sizeof(mmu_psize_defaults_gp));
+ found:
+	/*
+	 * Pick a size for the linear mapping. Currently, we only support
+	 * 16M, 1M and 4K which is the default
+	 */
+	if (mmu_psize_defs[MMU_PAGE_16M].shift)
+		mmu_linear_psize = MMU_PAGE_16M;
+	else if (mmu_psize_defs[MMU_PAGE_1M].shift)
+		mmu_linear_psize = MMU_PAGE_1M;
+
+	/*
+	 * Pick a size for the ordinary pages. Default is 4K, we support
+	 * 64K if cache inhibited large pages are supported by the
+	 * processor
+	 */
+#ifdef CONFIG_PPC_64K_PAGES
+	if (mmu_psize_defs[MMU_PAGE_64K].shift &&
+	    cpu_has_feature(CPU_FTR_CI_LARGE_PAGE))
+		mmu_virtual_psize = MMU_PAGE_64K;
+#endif
+
+	printk(KERN_INFO "Page orders: linear mapping = %d, others = %d\n",
+	       mmu_psize_defs[mmu_linear_psize].shift,
+	       mmu_psize_defs[mmu_virtual_psize].shift);
+
+#ifdef CONFIG_HUGETLB_PAGE
+	/* Init large page size. Currently, we pick 16M or 1M depending
+	 * on what is available
+	 */
+	if (mmu_psize_defs[MMU_PAGE_16M].shift)
+		mmu_huge_psize = MMU_PAGE_16M;
+	/* With 4k/4level pagetables, we can't (for now) cope with a
+	 * huge page size < PMD_SIZE */
+	else if (mmu_psize_defs[MMU_PAGE_1M].shift)
+		mmu_huge_psize = MMU_PAGE_1M;
+
+	/* Calculate HPAGE_SHIFT and sanity check it */
+	if (mmu_psize_defs[mmu_huge_psize].shift > MIN_HUGEPTE_SHIFT &&
+	    mmu_psize_defs[mmu_huge_psize].shift < SID_SHIFT)
+		HPAGE_SHIFT = mmu_psize_defs[mmu_huge_psize].shift;
+	else
+		HPAGE_SHIFT = 0; /* No huge pages dude ! */
+#endif /* CONFIG_HUGETLB_PAGE */
+}
+
+static int __init htab_dt_scan_pftsize(unsigned long node,
+				       const char *uname, int depth,
+				       void *data)
+{
+	char *type = of_get_flat_dt_prop(node, "device_type", NULL);
+	u32 *prop;
+
+	/* We are scanning "cpu" nodes only */
+	if (type == NULL || strcmp(type, "cpu") != 0)
+		return 0;
+
+	prop = (u32 *)of_get_flat_dt_prop(node, "ibm,pft-size", NULL);
+	if (prop != NULL) {
+		/* pft_size[0] is the NUMA CEC cookie */
+		ppc64_pft_size = prop[1];
+		return 1;
+	}
+	return 0;
+}
+
+static unsigned long __init htab_get_table_size(void)
+{
+	unsigned long mem_size, rnd_mem_size, pteg_count;
+
+	/* If hash size isn't already provided by the platform, we try to
+	 * retreive it from the device-tree. If it's not there neither, we
+	 * calculate it now based on the total RAM size
+	 */
+	if (ppc64_pft_size == 0)
+		of_scan_flat_dt(htab_dt_scan_pftsize, NULL);
+	if (ppc64_pft_size)
+		return 1UL << ppc64_pft_size;
+
+	/* round mem_size up to next power of 2 */
+	mem_size = lmb_phys_mem_size();
+	rnd_mem_size = 1UL << __ilog2(mem_size);
+	if (rnd_mem_size < mem_size)
+		rnd_mem_size <<= 1;
+
+	/* # pages / 2 */
+	pteg_count = max(rnd_mem_size >> (12 + 1), 1UL << 11);
+
+	return pteg_count << 7;
+}
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+void create_section_mapping(unsigned long start, unsigned long end)
+{
+		BUG_ON(htab_bolt_mapping(start, end, start,
+			_PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX,
+			mmu_linear_psize));
+}
+#endif /* CONFIG_MEMORY_HOTPLUG */
+
+void __init htab_initialize(void)
+{
+	unsigned long table, htab_size_bytes;
+	unsigned long pteg_count;
+	unsigned long mode_rw;
+	unsigned long base = 0, size = 0;
+	int i;
+
+	extern unsigned long tce_alloc_start, tce_alloc_end;
+
+	DBG(" -> htab_initialize()\n");
+
+	/* Initialize page sizes */
+	htab_init_page_sizes();
+
+	/*
+	 * Calculate the required size of the htab.  We want the number of
+	 * PTEGs to equal one half the number of real pages.
+	 */ 
+	htab_size_bytes = htab_get_table_size();
+	pteg_count = htab_size_bytes >> 7;
+
+	htab_hash_mask = pteg_count - 1;
+
+	if (platform_is_lpar()) {
+		/* Using a hypervisor which owns the htab */
+		htab_address = NULL;
+		_SDR1 = 0; 
+	} else {
+		/* Find storage for the HPT.  Must be contiguous in
+		 * the absolute address space.
+		 */
+		table = lmb_alloc(htab_size_bytes, htab_size_bytes);
+		BUG_ON(table == 0);
+
+		DBG("Hash table allocated at %lx, size: %lx\n", table,
+		    htab_size_bytes);
+
+		htab_address = abs_to_virt(table);
+
+		/* htab absolute addr + encoded htabsize */
+		_SDR1 = table + __ilog2(pteg_count) - 11;
+
+		/* Initialize the HPT with no entries */
+		memset((void *)table, 0, htab_size_bytes);
+
+		/* Set SDR1 */
+		mtspr(SPRN_SDR1, _SDR1);
+	}
+
+	mode_rw = _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX;
+
+	/* On U3 based machines, we need to reserve the DART area and
+	 * _NOT_ map it to avoid cache paradoxes as it's remapped non
+	 * cacheable later on
+	 */
+
+	/* create bolted the linear mapping in the hash table */
+	for (i=0; i < lmb.memory.cnt; i++) {
+		base = lmb.memory.region[i].base + KERNELBASE;
+		size = lmb.memory.region[i].size;
+
+		DBG("creating mapping for region: %lx : %lx\n", base, size);
+
+#ifdef CONFIG_U3_DART
+		/* Do not map the DART space. Fortunately, it will be aligned
+		 * in such a way that it will not cross two lmb regions and
+		 * will fit within a single 16Mb page.
+		 * The DART space is assumed to be a full 16Mb region even if
+		 * we only use 2Mb of that space. We will use more of it later
+		 * for AGP GART. We have to use a full 16Mb large page.
+		 */
+		DBG("DART base: %lx\n", dart_tablebase);
+
+		if (dart_tablebase != 0 && dart_tablebase >= base
+		    && dart_tablebase < (base + size)) {
+			if (base != dart_tablebase)
+				BUG_ON(htab_bolt_mapping(base, dart_tablebase,
+							 base, mode_rw,
+							 mmu_linear_psize));
+			if ((base + size) > (dart_tablebase + 16*MB))
+				BUG_ON(htab_bolt_mapping(dart_tablebase+16*MB,
+							 base + size,
+							 dart_tablebase+16*MB,
+							 mode_rw,
+							 mmu_linear_psize));
+			continue;
+		}
+#endif /* CONFIG_U3_DART */
+		BUG_ON(htab_bolt_mapping(base, base + size, base,
+					 mode_rw, mmu_linear_psize));
+       }
+
+	/*
+	 * If we have a memory_limit and we've allocated TCEs then we need to
+	 * explicitly map the TCE area at the top of RAM. We also cope with the
+	 * case that the TCEs start below memory_limit.
+	 * tce_alloc_start/end are 16MB aligned so the mapping should work
+	 * for either 4K or 16MB pages.
+	 */
+	if (tce_alloc_start) {
+		tce_alloc_start += KERNELBASE;
+		tce_alloc_end += KERNELBASE;
+
+		if (base + size >= tce_alloc_start)
+			tce_alloc_start = base + size + 1;
+
+ 		BUG_ON(htab_bolt_mapping(tce_alloc_start, tce_alloc_end,
+ 					 tce_alloc_start, mode_rw,
+					 mmu_linear_psize));
+	}
+
+	DBG(" <- htab_initialize()\n");
+}
+#undef KB
+#undef MB
+
+void __init htab_initialize_secondary(void)
+{
+	if (!platform_is_lpar())
+		mtspr(SPRN_SDR1, _SDR1);
+}
+
+/*
+ * Called by asm hashtable.S for doing lazy icache flush
+ */
+unsigned int hash_page_do_lazy_icache(unsigned int pp, pte_t pte, int trap)
+{
+	struct page *page;
+
+	if (!pfn_valid(pte_pfn(pte)))
+		return pp;
+
+	page = pte_page(pte);
+
+	/* page is dirty */
+	if (!test_bit(PG_arch_1, &page->flags) && !PageReserved(page)) {
+		if (trap == 0x400) {
+			__flush_dcache_icache(page_address(page));
+			set_bit(PG_arch_1, &page->flags);
+		} else
+			pp |= HPTE_R_N;
+	}
+	return pp;
+}
+
+/* Result code is:
+ *  0 - handled
+ *  1 - normal page fault
+ * -1 - critical hash insertion error
+ */
+int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
+{
+	void *pgdir;
+	unsigned long vsid;
+	struct mm_struct *mm;
+	pte_t *ptep;
+	cpumask_t tmp;
+	int rc, user_region = 0, local = 0;
+
+	DBG_LOW("hash_page(ea=%016lx, access=%lx, trap=%lx\n",
+		ea, access, trap);
+
+	if ((ea & ~REGION_MASK) >= PGTABLE_RANGE) {
+		DBG_LOW(" out of pgtable range !\n");
+ 		return 1;
+	}
+
+	/* Get region & vsid */
+ 	switch (REGION_ID(ea)) {
+	case USER_REGION_ID:
+		user_region = 1;
+		mm = current->mm;
+		if (! mm) {
+			DBG_LOW(" user region with no mm !\n");
+			return 1;
+		}
+		vsid = get_vsid(mm->context.id, ea);
+		break;
+	case VMALLOC_REGION_ID:
+		mm = &init_mm;
+		vsid = get_kernel_vsid(ea);
+		break;
+	default:
+		/* Not a valid range
+		 * Send the problem up to do_page_fault 
+		 */
+		return 1;
+	}
+	DBG_LOW(" mm=%p, mm->pgdir=%p, vsid=%016lx\n", mm, mm->pgd, vsid);
+
+	/* Get pgdir */
+	pgdir = mm->pgd;
+	if (pgdir == NULL)
+		return 1;
+
+	/* Check CPU locality */
+	tmp = cpumask_of_cpu(smp_processor_id());
+	if (user_region && cpus_equal(mm->cpu_vm_mask, tmp))
+		local = 1;
+
+	/* Handle hugepage regions */
+	if (unlikely(in_hugepage_area(mm->context, ea))) {
+		DBG_LOW(" -> huge page !\n");
+		return hash_huge_page(mm, access, ea, vsid, local);
+	}
+
+	/* Get PTE and page size from page tables */
+	ptep = find_linux_pte(pgdir, ea);
+	if (ptep == NULL || !pte_present(*ptep)) {
+		DBG_LOW(" no PTE !\n");
+		return 1;
+	}
+
+#ifndef CONFIG_PPC_64K_PAGES
+	DBG_LOW(" i-pte: %016lx\n", pte_val(*ptep));
+#else
+	DBG_LOW(" i-pte: %016lx %016lx\n", pte_val(*ptep),
+		pte_val(*(ptep + PTRS_PER_PTE)));
+#endif
+	/* Pre-check access permissions (will be re-checked atomically
+	 * in __hash_page_XX but this pre-check is a fast path
+	 */
+	if (access & ~pte_val(*ptep)) {
+		DBG_LOW(" no access !\n");
+		return 1;
+	}
+
+	/* Do actual hashing */
+#ifndef CONFIG_PPC_64K_PAGES
+	rc = __hash_page_4K(ea, access, vsid, ptep, trap, local);
+#else
+	if (mmu_virtual_psize == MMU_PAGE_64K)
+		rc = __hash_page_64K(ea, access, vsid, ptep, trap, local);
+	else
+		rc = __hash_page_4K(ea, access, vsid, ptep, trap, local);
+#endif /* CONFIG_PPC_64K_PAGES */
+
+#ifndef CONFIG_PPC_64K_PAGES
+	DBG_LOW(" o-pte: %016lx\n", pte_val(*ptep));
+#else
+	DBG_LOW(" o-pte: %016lx %016lx\n", pte_val(*ptep),
+		pte_val(*(ptep + PTRS_PER_PTE)));
+#endif
+	DBG_LOW(" -> rc=%d\n", rc);
+	return rc;
+}
+
+void hash_preload(struct mm_struct *mm, unsigned long ea,
+		  unsigned long access, unsigned long trap)
+{
+	unsigned long vsid;
+	void *pgdir;
+	pte_t *ptep;
+	cpumask_t mask;
+	unsigned long flags;
+	int local = 0;
+
+	/* We don't want huge pages prefaulted for now
+	 */
+	if (unlikely(in_hugepage_area(mm->context, ea)))
+		return;
+
+	DBG_LOW("hash_preload(mm=%p, mm->pgdir=%p, ea=%016lx, access=%lx,"
+		" trap=%lx\n", mm, mm->pgd, ea, access, trap);
+
+	/* Get PTE, VSID, access mask */
+	pgdir = mm->pgd;
+	if (pgdir == NULL)
+		return;
+	ptep = find_linux_pte(pgdir, ea);
+	if (!ptep)
+		return;
+	vsid = get_vsid(mm->context.id, ea);
+
+	/* Hash it in */
+	local_irq_save(flags);
+	mask = cpumask_of_cpu(smp_processor_id());
+	if (cpus_equal(mm->cpu_vm_mask, mask))
+		local = 1;
+#ifndef CONFIG_PPC_64K_PAGES
+	__hash_page_4K(ea, access, vsid, ptep, trap, local);
+#else
+	if (mmu_virtual_psize == MMU_PAGE_64K)
+		__hash_page_64K(ea, access, vsid, ptep, trap, local);
+	else
+		__hash_page_4K(ea, access, vsid, ptep, trap, local);
+#endif /* CONFIG_PPC_64K_PAGES */
+	local_irq_restore(flags);
+}
+
+void flush_hash_page(unsigned long va, real_pte_t pte, int psize, int local)
+{
+	unsigned long hash, index, shift, hidx, slot;
+
+	DBG_LOW("flush_hash_page(va=%016x)\n", va);
+	pte_iterate_hashed_subpages(pte, psize, va, index, shift) {
+		hash = hpt_hash(va, shift);
+		hidx = __rpte_to_hidx(pte, index);
+		if (hidx & _PTEIDX_SECONDARY)
+			hash = ~hash;
+		slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
+		slot += hidx & _PTEIDX_GROUP_IX;
+		DBG_LOW(" sub %d: hash=%x, hidx=%x\n", index, slot, hidx);
+		ppc_md.hpte_invalidate(slot, va, psize, local);
+	} pte_iterate_hashed_end();
+}
+
+void flush_hash_range(unsigned long number, int local)
+{
+	if (ppc_md.flush_hash_range)
+		ppc_md.flush_hash_range(number, local);
+	else {
+		int i;
+		struct ppc64_tlb_batch *batch =
+			&__get_cpu_var(ppc64_tlb_batch);
+
+		for (i = 0; i < number; i++)
+			flush_hash_page(batch->vaddr[i], batch->pte[i],
+					batch->psize, local);
+	}
+}
+
+static inline void make_bl(unsigned int *insn_addr, void *func)
+{
+	unsigned long funcp = *((unsigned long *)func);
+	int offset = funcp - (unsigned long)insn_addr;
+
+	*insn_addr = (unsigned int)(0x48000001 | (offset & 0x03fffffc));
+	flush_icache_range((unsigned long)insn_addr, 4+
+			   (unsigned long)insn_addr);
+}
+
+/*
+ * low_hash_fault is called when we the low level hash code failed
+ * to instert a PTE due to an hypervisor error
+ */
+void low_hash_fault(struct pt_regs *regs, unsigned long address)
+{
+	if (user_mode(regs)) {
+		siginfo_t info;
+
+		info.si_signo = SIGBUS;
+		info.si_errno = 0;
+		info.si_code = BUS_ADRERR;
+		info.si_addr = (void __user *)address;
+		force_sig_info(SIGBUS, &info, current);
+		return;
+	}
+	bad_page_fault(regs, address, SIGBUS);
+}
+
+void __init htab_finish_init(void)
+{
+	extern unsigned int *htab_call_hpte_insert1;
+	extern unsigned int *htab_call_hpte_insert2;
+	extern unsigned int *htab_call_hpte_remove;
+	extern unsigned int *htab_call_hpte_updatepp;
+
+#ifdef CONFIG_PPC_64K_PAGES
+	extern unsigned int *ht64_call_hpte_insert1;
+	extern unsigned int *ht64_call_hpte_insert2;
+	extern unsigned int *ht64_call_hpte_remove;
+	extern unsigned int *ht64_call_hpte_updatepp;
+
+	make_bl(ht64_call_hpte_insert1, ppc_md.hpte_insert);
+	make_bl(ht64_call_hpte_insert2, ppc_md.hpte_insert);
+	make_bl(ht64_call_hpte_remove, ppc_md.hpte_remove);
+	make_bl(ht64_call_hpte_updatepp, ppc_md.hpte_updatepp);
+#endif /* CONFIG_PPC_64K_PAGES */
+
+	make_bl(htab_call_hpte_insert1, ppc_md.hpte_insert);
+	make_bl(htab_call_hpte_insert2, ppc_md.hpte_insert);
+	make_bl(htab_call_hpte_remove, ppc_md.hpte_remove);
+	make_bl(htab_call_hpte_updatepp, ppc_md.hpte_updatepp);
+}
diff --git a/arch/ppc64/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 338771ec70d7..6bc9dbad7dea 100644
--- a/arch/ppc64/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -47,10 +47,25 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
 		pu = pud_offset(pg, addr);
 		if (!pud_none(*pu)) {
 			pm = pmd_offset(pu, addr);
+#ifdef CONFIG_PPC_64K_PAGES
+			/* Currently, we use the normal PTE offset within full
+			 * size PTE pages, thus our huge PTEs are scattered in
+			 * the PTE page and we do waste some. We may change
+			 * that in the future, but the current mecanism keeps
+			 * things much simpler
+			 */
+			if (!pmd_none(*pm)) {
+				/* Note: pte_offset_* are all equivalent on
+				 * ppc64 as we don't have HIGHMEM
+				 */
+				pt = pte_offset_kernel(pm, addr);
+				return pt;
+			}
+#else /* CONFIG_PPC_64K_PAGES */
+			/* On 4k pages, we put huge PTEs in the PMD page */
 			pt = (pte_t *)pm;
-			BUG_ON(!pmd_none(*pm)
-			       && !(pte_present(*pt) && pte_huge(*pt)));
 			return pt;
+#endif /* CONFIG_PPC_64K_PAGES */
 		}
 	}
 
@@ -74,9 +89,16 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
 	if (pu) {
 		pm = pmd_alloc(mm, pu, addr);
 		if (pm) {
+#ifdef CONFIG_PPC_64K_PAGES
+			/* See comment in huge_pte_offset. Note that if we ever
+			 * want to put the page size in the PMD, we would have
+			 * to open code our own pte_alloc* function in order
+			 * to populate and set the size atomically
+			 */
+			pt = pte_alloc_map(mm, pm, addr);
+#else /* CONFIG_PPC_64K_PAGES */
 			pt = (pte_t *)pm;
-			BUG_ON(!pmd_none(*pm)
-			       && !(pte_present(*pt) && pte_huge(*pt)));
+#endif /* CONFIG_PPC_64K_PAGES */
 			return pt;
 		}
 	}
@@ -84,35 +106,29 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
 	return NULL;
 }
 
-#define HUGEPTE_BATCH_SIZE	(HPAGE_SIZE / PMD_SIZE)
-
 void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
 		     pte_t *ptep, pte_t pte)
 {
-	int i;
-
 	if (pte_present(*ptep)) {
-		pte_clear(mm, addr, ptep);
+		/* We open-code pte_clear because we need to pass the right
+		 * argument to hpte_update (huge / !huge)
+		 */
+		unsigned long old = pte_update(ptep, ~0UL);
+		if (old & _PAGE_HASHPTE)
+			hpte_update(mm, addr & HPAGE_MASK, ptep, old, 1);
 		flush_tlb_pending();
 	}
-
-	for (i = 0; i < HUGEPTE_BATCH_SIZE; i++) {
-		*ptep = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
-		ptep++;
-	}
+	*ptep = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
 }
 
 pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
 			      pte_t *ptep)
 {
 	unsigned long old = pte_update(ptep, ~0UL);
-	int i;
 
 	if (old & _PAGE_HASHPTE)
-		hpte_update(mm, addr, old, 0);
-
-	for (i = 1; i < HUGEPTE_BATCH_SIZE; i++)
-		ptep[i] = __pte(0);
+		hpte_update(mm, addr & HPAGE_MASK, ptep, old, 1);
+	*ptep = __pte(0);
 
 	return __pte(old);
 }
@@ -196,6 +212,12 @@ static int prepare_high_area_for_htlb(struct mm_struct *mm, unsigned long area)
 
 	BUG_ON(area >= NUM_HIGH_AREAS);
 
+	/* Hack, so that each addresses is controlled by exactly one
+	 * of the high or low area bitmaps, the first high area starts
+	 * at 4GB, not 0 */
+	if (start == 0)
+		start = 0x100000000UL;
+
 	/* Check no VMAs are in the region */
 	vma = find_vma(mm, start);
 	if (vma && (vma->vm_start < end))
@@ -265,15 +287,15 @@ static int open_high_hpage_areas(struct mm_struct *mm, u16 newareas)
 
 int prepare_hugepage_range(unsigned long addr, unsigned long len)
 {
-	int err;
+	int err = 0;
 
 	if ( (addr+len) < addr )
 		return -EINVAL;
 
-	if ((addr + len) < 0x100000000UL)
+	if (addr < 0x100000000UL)
 		err = open_low_hpage_areas(current->mm,
 					  LOW_ESID_MASK(addr, len));
-	else
+	if ((addr + len) > 0x100000000UL)
 		err = open_high_hpage_areas(current->mm,
 					    HTLB_AREA_MASK(addr, len));
 	if (err) {
@@ -563,6 +585,8 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 	int lastshift;
 	u16 areamask, curareas;
 
+	if (HPAGE_SHIFT == 0)
+		return -EINVAL;
 	if (len & ~HPAGE_MASK)
 		return -EINVAL;
 
@@ -619,19 +643,15 @@ int hash_huge_page(struct mm_struct *mm, unsigned long access,
 		   unsigned long ea, unsigned long vsid, int local)
 {
 	pte_t *ptep;
-	unsigned long va, vpn;
-	pte_t old_pte, new_pte;
-	unsigned long rflags, prpn;
+	unsigned long old_pte, new_pte;
+	unsigned long va, rflags, pa;
 	long slot;
 	int err = 1;
 
-	spin_lock(&mm->page_table_lock);
-
 	ptep = huge_pte_offset(mm, ea);
 
 	/* Search the Linux page table for a match with va */
 	va = (vsid << 28) | (ea & 0x0fffffff);
-	vpn = va >> HPAGE_SHIFT;
 
 	/*
 	 * If no pte found or not present, send the problem up to
@@ -640,8 +660,6 @@ int hash_huge_page(struct mm_struct *mm, unsigned long access,
 	if (unlikely(!ptep || pte_none(*ptep)))
 		goto out;
 
-/* 	BUG_ON(pte_bad(*ptep)); */
-
 	/* 
 	 * Check the user's access rights to the page.  If access should be
 	 * prevented then send the problem up to do_page_fault.
@@ -661,59 +679,68 @@ int hash_huge_page(struct mm_struct *mm, unsigned long access,
 	 */
 
 
-	old_pte = *ptep;
-	new_pte = old_pte;
-
-	rflags = 0x2 | (! (pte_val(new_pte) & _PAGE_RW));
+	do {
+		old_pte = pte_val(*ptep);
+		if (old_pte & _PAGE_BUSY)
+			goto out;
+		new_pte = old_pte | _PAGE_BUSY |
+			_PAGE_ACCESSED | _PAGE_HASHPTE;
+	} while(old_pte != __cmpxchg_u64((unsigned long *)ptep,
+					 old_pte, new_pte));
+
+	rflags = 0x2 | (!(new_pte & _PAGE_RW));
  	/* _PAGE_EXEC -> HW_NO_EXEC since it's inverted */
-	rflags |= ((pte_val(new_pte) & _PAGE_EXEC) ? 0 : HW_NO_EXEC);
+	rflags |= ((new_pte & _PAGE_EXEC) ? 0 : HPTE_R_N);
 
 	/* Check if pte already has an hpte (case 2) */
-	if (unlikely(pte_val(old_pte) & _PAGE_HASHPTE)) {
+	if (unlikely(old_pte & _PAGE_HASHPTE)) {
 		/* There MIGHT be an HPTE for this pte */
 		unsigned long hash, slot;
 
-		hash = hpt_hash(vpn, 1);
-		if (pte_val(old_pte) & _PAGE_SECONDARY)
+		hash = hpt_hash(va, HPAGE_SHIFT);
+		if (old_pte & _PAGE_F_SECOND)
 			hash = ~hash;
 		slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
-		slot += (pte_val(old_pte) & _PAGE_GROUP_IX) >> 12;
+		slot += (old_pte & _PAGE_F_GIX) >> 12;
 
 		if (ppc_md.hpte_updatepp(slot, rflags, va, 1, local) == -1)
-			pte_val(old_pte) &= ~_PAGE_HPTEFLAGS;
+			old_pte &= ~_PAGE_HPTEFLAGS;
 	}
 
-	if (likely(!(pte_val(old_pte) & _PAGE_HASHPTE))) {
-		unsigned long hash = hpt_hash(vpn, 1);
+	if (likely(!(old_pte & _PAGE_HASHPTE))) {
+		unsigned long hash = hpt_hash(va, HPAGE_SHIFT);
 		unsigned long hpte_group;
 
-		prpn = pte_pfn(old_pte);
+		pa = pte_pfn(__pte(old_pte)) << PAGE_SHIFT;
 
 repeat:
 		hpte_group = ((hash & htab_hash_mask) *
 			      HPTES_PER_GROUP) & ~0x7UL;
 
-		/* Update the linux pte with the HPTE slot */
-		pte_val(new_pte) &= ~_PAGE_HPTEFLAGS;
-		pte_val(new_pte) |= _PAGE_HASHPTE;
+		/* clear HPTE slot informations in new PTE */
+		new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HASHPTE;
 
 		/* Add in WIMG bits */
 		/* XXX We should store these in the pte */
+		/* --BenH: I think they are ... */
 		rflags |= _PAGE_COHERENT;
 
-		slot = ppc_md.hpte_insert(hpte_group, va, prpn,
-					  HPTE_V_LARGE, rflags);
+		/* Insert into the hash table, primary slot */
+		slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags, 0,
+					  mmu_huge_psize);
 
 		/* Primary is full, try the secondary */
 		if (unlikely(slot == -1)) {
-			pte_val(new_pte) |= _PAGE_SECONDARY;
+			new_pte |= _PAGE_F_SECOND;
 			hpte_group = ((~hash & htab_hash_mask) *
 				      HPTES_PER_GROUP) & ~0x7UL; 
-			slot = ppc_md.hpte_insert(hpte_group, va, prpn,
-						  HPTE_V_LARGE, rflags);
+			slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags,
+						  HPTE_V_SECONDARY,
+						  mmu_huge_psize);
 			if (slot == -1) {
 				if (mftb() & 0x1)
-					hpte_group = ((hash & htab_hash_mask) * HPTES_PER_GROUP) & ~0x7UL;
+					hpte_group = ((hash & htab_hash_mask) *
+						      HPTES_PER_GROUP)&~0x7UL;
 
 				ppc_md.hpte_remove(hpte_group);
 				goto repeat;
@@ -723,20 +750,16 @@ repeat:
 		if (unlikely(slot == -2))
 			panic("hash_huge_page: pte_insert failed\n");
 
-		pte_val(new_pte) |= (slot<<12) & _PAGE_GROUP_IX;
-
-		/* 
-		 * No need to use ldarx/stdcx here because all who
-		 * might be updating the pte will hold the
-		 * page_table_lock
-		 */
-		*ptep = new_pte;
+		new_pte |= (slot << 12) & _PAGE_F_GIX;
 	}
 
+	/*
+	 * No need to use ldarx/stdcx here
+	 */
+	*ptep = __pte(new_pte & ~_PAGE_BUSY);
+
 	err = 0;
 
  out:
-	spin_unlock(&mm->page_table_lock);
-
 	return err;
 }
diff --git a/arch/ppc64/mm/imalloc.c b/arch/powerpc/mm/imalloc.c
index c65b87b92756..f9587bcc6a48 100644
--- a/arch/ppc64/mm/imalloc.c
+++ b/arch/powerpc/mm/imalloc.c
@@ -14,9 +14,10 @@
 #include <asm/pgalloc.h>
 #include <asm/pgtable.h>
 #include <asm/semaphore.h>
-#include <asm/imalloc.h>
 #include <asm/cacheflush.h>
 
+#include "mmu_decl.h"
+
 static DECLARE_MUTEX(imlist_sem);
 struct vm_struct * imlist = NULL;
 
@@ -300,12 +301,7 @@ void im_free(void * addr)
 	for (p = &imlist ; (tmp = *p) ; p = &tmp->next) {
 		if (tmp->addr == addr) {
 			*p = tmp->next;
-
-			/* XXX: do we need the lock? */
-			spin_lock(&init_mm.page_table_lock);
 			unmap_vm_area(tmp);
-			spin_unlock(&init_mm.page_table_lock);
-
 			kfree(tmp);
 			up(&imlist_sem);
 			return;
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
new file mode 100644
index 000000000000..7d4b8b5f0606
--- /dev/null
+++ b/arch/powerpc/mm/init_32.c
@@ -0,0 +1,251 @@
+/*
+ *  PowerPC version
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ *    Copyright (C) 1996 Paul Mackerras
+ *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *  PPC44x/36-bit changes by Matt Porter (mporter@mvista.com)
+ *
+ *  Derived from "arch/i386/mm/init.c"
+ *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/highmem.h>
+#include <linux/initrd.h>
+#include <linux/pagemap.h>
+
+#include <asm/pgalloc.h>
+#include <asm/prom.h>
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <asm/pgtable.h>
+#include <asm/mmu.h>
+#include <asm/smp.h>
+#include <asm/machdep.h>
+#include <asm/btext.h>
+#include <asm/tlb.h>
+#include <asm/prom.h>
+#include <asm/lmb.h>
+#include <asm/sections.h>
+
+#include "mmu_decl.h"
+
+#if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL)
+/* The ammount of lowmem must be within 0xF0000000 - KERNELBASE. */
+#if (CONFIG_LOWMEM_SIZE > (0xF0000000 - KERNELBASE))
+#error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_START_KERNEL"
+#endif
+#endif
+#define MAX_LOW_MEM	CONFIG_LOWMEM_SIZE
+
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+unsigned long total_memory;
+unsigned long total_lowmem;
+
+unsigned long ppc_memstart;
+unsigned long ppc_memoffset = PAGE_OFFSET;
+
+int boot_mapsize;
+#ifdef CONFIG_PPC_PMAC
+unsigned long agp_special_page;
+EXPORT_SYMBOL(agp_special_page);
+#endif
+
+#ifdef CONFIG_HIGHMEM
+pte_t *kmap_pte;
+pgprot_t kmap_prot;
+
+EXPORT_SYMBOL(kmap_prot);
+EXPORT_SYMBOL(kmap_pte);
+#endif
+
+void MMU_init(void);
+
+/* XXX should be in current.h  -- paulus */
+extern struct task_struct *current_set[NR_CPUS];
+
+extern int init_bootmem_done;
+
+/*
+ * this tells the system to map all of ram with the segregs
+ * (i.e. page tables) instead of the bats.
+ * -- Cort
+ */
+int __map_without_bats;
+int __map_without_ltlbs;
+
+/* max amount of low RAM to map in */
+unsigned long __max_low_memory = MAX_LOW_MEM;
+
+/*
+ * limit of what is accessible with initial MMU setup -
+ * 256MB usually, but only 16MB on 601.
+ */
+unsigned long __initial_memory_limit = 0x10000000;
+
+/*
+ * Check for command-line options that affect what MMU_init will do.
+ */
+void MMU_setup(void)
+{
+	/* Check for nobats option (used in mapin_ram). */
+	if (strstr(cmd_line, "nobats")) {
+		__map_without_bats = 1;
+	}
+
+	if (strstr(cmd_line, "noltlbs")) {
+		__map_without_ltlbs = 1;
+	}
+}
+
+/*
+ * MMU_init sets up the basic memory mappings for the kernel,
+ * including both RAM and possibly some I/O regions,
+ * and sets up the page tables and the MMU hardware ready to go.
+ */
+void __init MMU_init(void)
+{
+	if (ppc_md.progress)
+		ppc_md.progress("MMU:enter", 0x111);
+
+	/* 601 can only access 16MB at the moment */
+	if (PVR_VER(mfspr(SPRN_PVR)) == 1)
+		__initial_memory_limit = 0x01000000;
+
+	/* parse args from command line */
+	MMU_setup();
+
+	if (lmb.memory.cnt > 1) {
+		lmb.memory.cnt = 1;
+		lmb_analyze();
+		printk(KERN_WARNING "Only using first contiguous memory region");
+	}
+
+	total_memory = lmb_end_of_DRAM();
+	total_lowmem = total_memory;
+
+#ifdef CONFIG_FSL_BOOKE
+	/* Freescale Book-E parts expect lowmem to be mapped by fixed TLB
+	 * entries, so we need to adjust lowmem to match the amount we can map
+	 * in the fixed entries */
+	adjust_total_lowmem();
+#endif /* CONFIG_FSL_BOOKE */
+
+	if (total_lowmem > __max_low_memory) {
+		total_lowmem = __max_low_memory;
+#ifndef CONFIG_HIGHMEM
+		total_memory = total_lowmem;
+		lmb_enforce_memory_limit(total_lowmem);
+		lmb_analyze();
+#endif /* CONFIG_HIGHMEM */
+	}
+
+	/* Initialize the MMU hardware */
+	if (ppc_md.progress)
+		ppc_md.progress("MMU:hw init", 0x300);
+	MMU_init_hw();
+
+	/* Map in all of RAM starting at KERNELBASE */
+	if (ppc_md.progress)
+		ppc_md.progress("MMU:mapin", 0x301);
+	mapin_ram();
+
+#ifdef CONFIG_HIGHMEM
+	ioremap_base = PKMAP_BASE;
+#else
+	ioremap_base = 0xfe000000UL;	/* for now, could be 0xfffff000 */
+#endif /* CONFIG_HIGHMEM */
+	ioremap_bot = ioremap_base;
+
+	/* Map in I/O resources */
+	if (ppc_md.progress)
+		ppc_md.progress("MMU:setio", 0x302);
+	if (ppc_md.setup_io_mappings)
+		ppc_md.setup_io_mappings();
+
+	/* Initialize the context management stuff */
+	mmu_context_init();
+
+	if (ppc_md.progress)
+		ppc_md.progress("MMU:exit", 0x211);
+}
+
+/* This is only called until mem_init is done. */
+void __init *early_get_page(void)
+{
+	void *p;
+
+	if (init_bootmem_done) {
+		p = alloc_bootmem_pages(PAGE_SIZE);
+	} else {
+		p = __va(lmb_alloc_base(PAGE_SIZE, PAGE_SIZE,
+					__initial_memory_limit));
+	}
+	return p;
+}
+
+/* Free up now-unused memory */
+static void free_sec(unsigned long start, unsigned long end, const char *name)
+{
+	unsigned long cnt = 0;
+
+	while (start < end) {
+		ClearPageReserved(virt_to_page(start));
+		set_page_count(virt_to_page(start), 1);
+		free_page(start);
+		cnt++;
+		start += PAGE_SIZE;
+ 	}
+	if (cnt) {
+		printk(" %ldk %s", cnt << (PAGE_SHIFT - 10), name);
+		totalram_pages += cnt;
+	}
+}
+
+void free_initmem(void)
+{
+#define FREESEC(TYPE) \
+	free_sec((unsigned long)(&__ ## TYPE ## _begin), \
+		 (unsigned long)(&__ ## TYPE ## _end), \
+		 #TYPE);
+
+	printk ("Freeing unused kernel memory:");
+	FREESEC(init);
+ 	printk("\n");
+	ppc_md.progress = NULL;
+#undef FREESEC
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+void free_initrd_mem(unsigned long start, unsigned long end)
+{
+	if (start < end)
+		printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
+	for (; start < end; start += PAGE_SIZE) {
+		ClearPageReserved(virt_to_page(start));
+		set_page_count(virt_to_page(start), 1);
+		free_page(start);
+		totalram_pages++;
+	}
+}
+#endif
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
new file mode 100644
index 000000000000..81cfb0c2ec58
--- /dev/null
+++ b/arch/powerpc/mm/init_64.c
@@ -0,0 +1,235 @@
+/*
+ *  PowerPC version
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ *    Copyright (C) 1996 Paul Mackerras
+ *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ *  Derived from "arch/i386/mm/init.c"
+ *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
+ *
+ *  Dave Engebretsen <engebret@us.ibm.com>
+ *      Rework for PPC64 port.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#undef DEBUG
+
+#include <linux/config.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/stddef.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/bootmem.h>
+#include <linux/highmem.h>
+#include <linux/idr.h>
+#include <linux/nodemask.h>
+#include <linux/module.h>
+
+#include <asm/pgalloc.h>
+#include <asm/page.h>
+#include <asm/prom.h>
+#include <asm/lmb.h>
+#include <asm/rtas.h>
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <asm/pgtable.h>
+#include <asm/mmu.h>
+#include <asm/uaccess.h>
+#include <asm/smp.h>
+#include <asm/machdep.h>
+#include <asm/tlb.h>
+#include <asm/eeh.h>
+#include <asm/processor.h>
+#include <asm/mmzone.h>
+#include <asm/cputable.h>
+#include <asm/sections.h>
+#include <asm/system.h>
+#include <asm/iommu.h>
+#include <asm/abs_addr.h>
+#include <asm/vdso.h>
+
+#include "mmu_decl.h"
+
+#ifdef DEBUG
+#define DBG(fmt...) printk(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+#if PGTABLE_RANGE > USER_VSID_RANGE
+#warning Limited user VSID range means pagetable space is wasted
+#endif
+
+#if (TASK_SIZE_USER64 < PGTABLE_RANGE) && (TASK_SIZE_USER64 < USER_VSID_RANGE)
+#warning TASK_SIZE is smaller than it needs to be.
+#endif
+
+/* max amount of RAM to use */
+unsigned long __max_memory;
+
+/* info on what we think the IO hole is */
+unsigned long 	io_hole_start;
+unsigned long	io_hole_size;
+
+/*
+ * Do very early mm setup.
+ */
+void __init mm_init_ppc64(void)
+{
+#ifndef CONFIG_PPC_ISERIES
+	unsigned long i;
+#endif
+
+	ppc64_boot_msg(0x100, "MM Init");
+
+	/* This is the story of the IO hole... please, keep seated,
+	 * unfortunately, we are out of oxygen masks at the moment.
+	 * So we need some rough way to tell where your big IO hole
+	 * is. On pmac, it's between 2G and 4G, on POWER3, it's around
+	 * that area as well, on POWER4 we don't have one, etc...
+	 * We need that as a "hint" when sizing the TCE table on POWER3
+	 * So far, the simplest way that seem work well enough for us it
+	 * to just assume that the first discontinuity in our physical
+	 * RAM layout is the IO hole. That may not be correct in the future
+	 * (and isn't on iSeries but then we don't care ;)
+	 */
+
+#ifndef CONFIG_PPC_ISERIES
+	for (i = 1; i < lmb.memory.cnt; i++) {
+		unsigned long base, prevbase, prevsize;
+
+		prevbase = lmb.memory.region[i-1].base;
+		prevsize = lmb.memory.region[i-1].size;
+		base = lmb.memory.region[i].base;
+		if (base > (prevbase + prevsize)) {
+			io_hole_start = prevbase + prevsize;
+			io_hole_size = base  - (prevbase + prevsize);
+			break;
+		}
+	}
+#endif /* CONFIG_PPC_ISERIES */
+	if (io_hole_start)
+		printk("IO Hole assumed to be %lx -> %lx\n",
+		       io_hole_start, io_hole_start + io_hole_size - 1);
+
+	ppc64_boot_msg(0x100, "MM Init Done");
+}
+
+void free_initmem(void)
+{
+	unsigned long addr;
+
+	addr = (unsigned long)__init_begin;
+	for (; addr < (unsigned long)__init_end; addr += PAGE_SIZE) {
+		memset((void *)addr, 0xcc, PAGE_SIZE);
+		ClearPageReserved(virt_to_page(addr));
+		set_page_count(virt_to_page(addr), 1);
+		free_page(addr);
+		totalram_pages++;
+	}
+	printk ("Freeing unused kernel memory: %luk freed\n",
+		((unsigned long)__init_end - (unsigned long)__init_begin) >> 10);
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+void free_initrd_mem(unsigned long start, unsigned long end)
+{
+	if (start < end)
+		printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
+	for (; start < end; start += PAGE_SIZE) {
+		ClearPageReserved(virt_to_page(start));
+		set_page_count(virt_to_page(start), 1);
+		free_page(start);
+		totalram_pages++;
+	}
+}
+#endif
+
+static struct kcore_list kcore_vmem;
+
+static int __init setup_kcore(void)
+{
+	int i;
+
+	for (i=0; i < lmb.memory.cnt; i++) {
+		unsigned long base, size;
+		struct kcore_list *kcore_mem;
+
+		base = lmb.memory.region[i].base;
+		size = lmb.memory.region[i].size;
+
+		/* GFP_ATOMIC to avoid might_sleep warnings during boot */
+		kcore_mem = kmalloc(sizeof(struct kcore_list), GFP_ATOMIC);
+		if (!kcore_mem)
+			panic("mem_init: kmalloc failed\n");
+
+		kclist_add(kcore_mem, __va(base), size);
+	}
+
+	kclist_add(&kcore_vmem, (void *)VMALLOC_START, VMALLOC_END-VMALLOC_START);
+
+	return 0;
+}
+module_init(setup_kcore);
+
+static void zero_ctor(void *addr, kmem_cache_t *cache, unsigned long flags)
+{
+	memset(addr, 0, kmem_cache_size(cache));
+}
+
+#ifdef CONFIG_PPC_64K_PAGES
+static const unsigned int pgtable_cache_size[3] = {
+	PTE_TABLE_SIZE, PMD_TABLE_SIZE, PGD_TABLE_SIZE
+};
+static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = {
+	"pte_pmd_cache", "pmd_cache", "pgd_cache",
+};
+#else
+static const unsigned int pgtable_cache_size[2] = {
+	PTE_TABLE_SIZE, PMD_TABLE_SIZE
+};
+static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = {
+	"pgd_pte_cache", "pud_pmd_cache",
+};
+#endif /* CONFIG_PPC_64K_PAGES */
+
+kmem_cache_t *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)];
+
+void pgtable_cache_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(pgtable_cache_size); i++) {
+		int size = pgtable_cache_size[i];
+		const char *name = pgtable_cache_name[i];
+
+		DBG("Allocating page table cache %s (#%d) "
+		    "for size: %08x...\n", name, i, size);
+		pgtable_cache[i] = kmem_cache_create(name,
+						     size, size,
+						     SLAB_HWCACHE_ALIGN |
+						     SLAB_MUST_HWCACHE_ALIGN,
+						     zero_ctor,
+						     NULL);
+		if (! pgtable_cache[i])
+			panic("pgtable_cache_init(): could not create %s!\n",
+			      name);
+	}
+}
diff --git a/arch/ppc64/kernel/lmb.c b/arch/powerpc/mm/lmb.c
index 5adaca2ddc9d..9584608fd768 100644
--- a/arch/ppc64/kernel/lmb.c
+++ b/arch/powerpc/mm/lmb.c
@@ -1,5 +1,5 @@
 /*
- * Procedures for interfacing to Open Firmware.
+ * Procedures for maintaining information about logical memory blocks.
  *
  * Peter Bergner, IBM Corp.	June 2001.
  * Copyright (C) 2001 Peter Bergner.
@@ -18,52 +18,55 @@
 #include <asm/page.h>
 #include <asm/prom.h>
 #include <asm/lmb.h>
-#include <asm/abs_addr.h>
-
-struct lmb lmb;
+#ifdef CONFIG_PPC32
+#include "mmu_decl.h"		/* for __max_low_memory */
+#endif
 
 #undef DEBUG
 
+#ifdef DEBUG
+#include <asm/udbg.h>
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+struct lmb lmb;
+
 void lmb_dump_all(void)
 {
 #ifdef DEBUG
 	unsigned long i;
 
-	udbg_printf("lmb_dump_all:\n");
-	udbg_printf("    memory.cnt		  = 0x%lx\n",
-		    lmb.memory.cnt);
-	udbg_printf("    memory.size		  = 0x%lx\n",
-		    lmb.memory.size);
+	DBG("lmb_dump_all:\n");
+	DBG("    memory.cnt		  = 0x%lx\n", lmb.memory.cnt);
+	DBG("    memory.size		  = 0x%lx\n", lmb.memory.size);
 	for (i=0; i < lmb.memory.cnt ;i++) {
-		udbg_printf("    memory.region[0x%x].base       = 0x%lx\n",
+		DBG("    memory.region[0x%x].base       = 0x%lx\n",
 			    i, lmb.memory.region[i].base);
-		udbg_printf("		      .size     = 0x%lx\n",
+		DBG("		      .size     = 0x%lx\n",
 			    lmb.memory.region[i].size);
 	}
 
-	udbg_printf("\n    reserved.cnt	  = 0x%lx\n",
-		    lmb.reserved.cnt);
-	udbg_printf("    reserved.size	  = 0x%lx\n",
-		    lmb.reserved.size);
+	DBG("\n    reserved.cnt	  = 0x%lx\n", lmb.reserved.cnt);
+	DBG("    reserved.size	  = 0x%lx\n", lmb.reserved.size);
 	for (i=0; i < lmb.reserved.cnt ;i++) {
-		udbg_printf("    reserved.region[0x%x].base       = 0x%lx\n",
+		DBG("    reserved.region[0x%x].base       = 0x%lx\n",
 			    i, lmb.reserved.region[i].base);
-		udbg_printf("		      .size     = 0x%lx\n",
+		DBG("		      .size     = 0x%lx\n",
 			    lmb.reserved.region[i].size);
 	}
 #endif /* DEBUG */
 }
 
-static unsigned long __init
-lmb_addrs_overlap(unsigned long base1, unsigned long size1,
-                  unsigned long base2, unsigned long size2)
+static unsigned long __init lmb_addrs_overlap(unsigned long base1,
+		unsigned long size1, unsigned long base2, unsigned long size2)
 {
 	return ((base1 < (base2+size2)) && (base2 < (base1+size1)));
 }
 
-static long __init
-lmb_addrs_adjacent(unsigned long base1, unsigned long size1,
-		   unsigned long base2, unsigned long size2)
+static long __init lmb_addrs_adjacent(unsigned long base1, unsigned long size1,
+		unsigned long base2, unsigned long size2)
 {
 	if (base2 == base1 + size1)
 		return 1;
@@ -73,8 +76,8 @@ lmb_addrs_adjacent(unsigned long base1, unsigned long size1,
 	return 0;
 }
 
-static long __init
-lmb_regions_adjacent(struct lmb_region *rgn, unsigned long r1, unsigned long r2)
+static long __init lmb_regions_adjacent(struct lmb_region *rgn,
+		unsigned long r1, unsigned long r2)
 {
 	unsigned long base1 = rgn->region[r1].base;
 	unsigned long size1 = rgn->region[r1].size;
@@ -85,8 +88,8 @@ lmb_regions_adjacent(struct lmb_region *rgn, unsigned long r1, unsigned long r2)
 }
 
 /* Assumption: base addr of region 1 < base addr of region 2 */
-static void __init
-lmb_coalesce_regions(struct lmb_region *rgn, unsigned long r1, unsigned long r2)
+static void __init lmb_coalesce_regions(struct lmb_region *rgn,
+		unsigned long r1, unsigned long r2)
 {
 	unsigned long i;
 
@@ -99,8 +102,7 @@ lmb_coalesce_regions(struct lmb_region *rgn, unsigned long r1, unsigned long r2)
 }
 
 /* This routine called with relocation disabled. */
-void __init
-lmb_init(void)
+void __init lmb_init(void)
 {
 	/* Create a dummy zero size LMB which will get coalesced away later.
 	 * This simplifies the lmb_add() code below...
@@ -115,9 +117,8 @@ lmb_init(void)
 	lmb.reserved.cnt = 1;
 }
 
-/* This routine called with relocation disabled. */
-void __init
-lmb_analyze(void)
+/* This routine may be called with relocation disabled. */
+void __init lmb_analyze(void)
 {
 	int i;
 
@@ -128,8 +129,8 @@ lmb_analyze(void)
 }
 
 /* This routine called with relocation disabled. */
-static long __init
-lmb_add_region(struct lmb_region *rgn, unsigned long base, unsigned long size)
+static long __init lmb_add_region(struct lmb_region *rgn, unsigned long base,
+				  unsigned long size)
 {
 	unsigned long i, coalesced = 0;
 	long adjacent;
@@ -158,18 +159,17 @@ lmb_add_region(struct lmb_region *rgn, unsigned long base, unsigned long size)
 		coalesced++;
 	}
 
-	if ( coalesced ) {
+	if (coalesced)
 		return coalesced;
-	} else if ( rgn->cnt >= MAX_LMB_REGIONS ) {
+	if (rgn->cnt >= MAX_LMB_REGIONS)
 		return -1;
-	}
 
 	/* Couldn't coalesce the LMB, so add it to the sorted table. */
-	for (i=rgn->cnt-1; i >= 0; i--) {
+	for (i = rgn->cnt-1; i >= 0; i--) {
 		if (base < rgn->region[i].base) {
 			rgn->region[i+1].base = rgn->region[i].base;
 			rgn->region[i+1].size = rgn->region[i].size;
-		}  else {
+		} else {
 			rgn->region[i+1].base = base;
 			rgn->region[i+1].size = size;
 			break;
@@ -180,30 +180,28 @@ lmb_add_region(struct lmb_region *rgn, unsigned long base, unsigned long size)
 	return 0;
 }
 
-/* This routine called with relocation disabled. */
-long __init
-lmb_add(unsigned long base, unsigned long size)
+/* This routine may be called with relocation disabled. */
+long __init lmb_add(unsigned long base, unsigned long size)
 {
 	struct lmb_region *_rgn = &(lmb.memory);
 
 	/* On pSeries LPAR systems, the first LMB is our RMO region. */
-	if ( base == 0 )
+	if (base == 0)
 		lmb.rmo_size = size;
 
 	return lmb_add_region(_rgn, base, size);
 
 }
 
-long __init
-lmb_reserve(unsigned long base, unsigned long size)
+long __init lmb_reserve(unsigned long base, unsigned long size)
 {
 	struct lmb_region *_rgn = &(lmb.reserved);
 
 	return lmb_add_region(_rgn, base, size);
 }
 
-long __init
-lmb_overlaps_region(struct lmb_region *rgn, unsigned long base, unsigned long size)
+long __init lmb_overlaps_region(struct lmb_region *rgn, unsigned long base,
+				unsigned long size)
 {
 	unsigned long i;
 
@@ -218,39 +216,44 @@ lmb_overlaps_region(struct lmb_region *rgn, unsigned long base, unsigned long si
 	return (i < rgn->cnt) ? i : -1;
 }
 
-unsigned long __init
-lmb_alloc(unsigned long size, unsigned long align)
+unsigned long __init lmb_alloc(unsigned long size, unsigned long align)
 {
 	return lmb_alloc_base(size, align, LMB_ALLOC_ANYWHERE);
 }
 
-unsigned long __init
-lmb_alloc_base(unsigned long size, unsigned long align, unsigned long max_addr)
+unsigned long __init lmb_alloc_base(unsigned long size, unsigned long align,
+				    unsigned long max_addr)
 {
 	long i, j;
 	unsigned long base = 0;
 
-	for (i=lmb.memory.cnt-1; i >= 0; i--) {
+#ifdef CONFIG_PPC32
+	/* On 32-bit, make sure we allocate lowmem */
+	if (max_addr == LMB_ALLOC_ANYWHERE)
+		max_addr = __max_low_memory;
+#endif
+	for (i = lmb.memory.cnt-1; i >= 0; i--) {
 		unsigned long lmbbase = lmb.memory.region[i].base;
 		unsigned long lmbsize = lmb.memory.region[i].size;
 
-		if ( max_addr == LMB_ALLOC_ANYWHERE )
-			base = _ALIGN_DOWN(lmbbase+lmbsize-size, align);
-		else if ( lmbbase < max_addr )
-			base = _ALIGN_DOWN(min(lmbbase+lmbsize,max_addr)-size, align);
-		else
+		if (max_addr == LMB_ALLOC_ANYWHERE)
+			base = _ALIGN_DOWN(lmbbase + lmbsize - size, align);
+		else if (lmbbase < max_addr) {
+			base = min(lmbbase + lmbsize, max_addr);
+			base = _ALIGN_DOWN(base - size, align);
+		} else
 			continue;
 
-		while ( (lmbbase <= base) &&
-			((j = lmb_overlaps_region(&lmb.reserved,base,size)) >= 0) ) {
-			base = _ALIGN_DOWN(lmb.reserved.region[j].base-size, align);
-		}
+		while ((lmbbase <= base) &&
+		       ((j = lmb_overlaps_region(&lmb.reserved, base, size)) >= 0) )
+			base = _ALIGN_DOWN(lmb.reserved.region[j].base - size,
+					   align);
 
-		if ( (base != 0) && (lmbbase <= base) )
+		if ((base != 0) && (lmbbase <= base))
 			break;
 	}
 
-	if ( i < 0 )
+	if (i < 0)
 		return 0;
 
 	lmb_add_region(&lmb.reserved, base, size);
@@ -259,14 +262,12 @@ lmb_alloc_base(unsigned long size, unsigned long align, unsigned long max_addr)
 }
 
 /* You must call lmb_analyze() before this. */
-unsigned long __init
-lmb_phys_mem_size(void)
+unsigned long __init lmb_phys_mem_size(void)
 {
 	return lmb.memory.size;
 }
 
-unsigned long __init
-lmb_end_of_DRAM(void)
+unsigned long __init lmb_end_of_DRAM(void)
 {
 	int idx = lmb.memory.cnt - 1;
 
@@ -277,9 +278,8 @@ lmb_end_of_DRAM(void)
  * Truncate the lmb list to memory_limit if it's set
  * You must call lmb_analyze() after this.
  */
-void __init lmb_enforce_memory_limit(void)
+void __init lmb_enforce_memory_limit(unsigned long memory_limit)
 {
-	extern unsigned long memory_limit;
 	unsigned long i, limit;
 
 	if (! memory_limit)
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
new file mode 100644
index 000000000000..ed6ed2e30dac
--- /dev/null
+++ b/arch/powerpc/mm/mem.c
@@ -0,0 +1,554 @@
+/*
+ *  PowerPC version
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ *    Copyright (C) 1996 Paul Mackerras
+ *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *  PPC44x/36-bit changes by Matt Porter (mporter@mvista.com)
+ *
+ *  Derived from "arch/i386/mm/init.c"
+ *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/highmem.h>
+#include <linux/initrd.h>
+#include <linux/pagemap.h>
+
+#include <asm/pgalloc.h>
+#include <asm/prom.h>
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <asm/pgtable.h>
+#include <asm/mmu.h>
+#include <asm/smp.h>
+#include <asm/machdep.h>
+#include <asm/btext.h>
+#include <asm/tlb.h>
+#include <asm/prom.h>
+#include <asm/lmb.h>
+#include <asm/sections.h>
+#include <asm/vdso.h>
+
+#include "mmu_decl.h"
+
+#ifndef CPU_FTR_COHERENT_ICACHE
+#define CPU_FTR_COHERENT_ICACHE	0	/* XXX for now */
+#define CPU_FTR_NOEXECUTE	0
+#endif
+
+int init_bootmem_done;
+int mem_init_done;
+unsigned long memory_limit;
+
+extern void hash_preload(struct mm_struct *mm, unsigned long ea,
+			 unsigned long access, unsigned long trap);
+
+/*
+ * This is called by /dev/mem to know if a given address has to
+ * be mapped non-cacheable or not
+ */
+int page_is_ram(unsigned long pfn)
+{
+	unsigned long paddr = (pfn << PAGE_SHIFT);
+
+#ifndef CONFIG_PPC64	/* XXX for now */
+	return paddr < __pa(high_memory);
+#else
+	int i;
+	for (i=0; i < lmb.memory.cnt; i++) {
+		unsigned long base;
+
+		base = lmb.memory.region[i].base;
+
+		if ((paddr >= base) &&
+			(paddr < (base + lmb.memory.region[i].size))) {
+			return 1;
+		}
+	}
+
+	return 0;
+#endif
+}
+EXPORT_SYMBOL(page_is_ram);
+
+pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+			      unsigned long size, pgprot_t vma_prot)
+{
+	if (ppc_md.phys_mem_access_prot)
+		return ppc_md.phys_mem_access_prot(file, pfn, size, vma_prot);
+
+	if (!page_is_ram(pfn))
+		vma_prot = __pgprot(pgprot_val(vma_prot)
+				    | _PAGE_GUARDED | _PAGE_NO_CACHE);
+	return vma_prot;
+}
+EXPORT_SYMBOL(phys_mem_access_prot);
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+
+void online_page(struct page *page)
+{
+	ClearPageReserved(page);
+	set_page_count(page, 0);
+	free_cold_page(page);
+	totalram_pages++;
+	num_physpages++;
+}
+
+/*
+ * This works only for the non-NUMA case.  Later, we'll need a lookup
+ * to convert from real physical addresses to nid, that doesn't use
+ * pfn_to_nid().
+ */
+int __devinit add_memory(u64 start, u64 size)
+{
+	struct pglist_data *pgdata = NODE_DATA(0);
+	struct zone *zone;
+	unsigned long start_pfn = start >> PAGE_SHIFT;
+	unsigned long nr_pages = size >> PAGE_SHIFT;
+
+	start += KERNELBASE;
+	create_section_mapping(start, start + size);
+
+	/* this should work for most non-highmem platforms */
+	zone = pgdata->node_zones;
+
+	return __add_pages(zone, start_pfn, nr_pages);
+
+	return 0;
+}
+
+/*
+ * First pass at this code will check to determine if the remove
+ * request is within the RMO.  Do not allow removal within the RMO.
+ */
+int __devinit remove_memory(u64 start, u64 size)
+{
+	struct zone *zone;
+	unsigned long start_pfn, end_pfn, nr_pages;
+
+	start_pfn = start >> PAGE_SHIFT;
+	nr_pages = size >> PAGE_SHIFT;
+	end_pfn = start_pfn + nr_pages;
+
+	printk("%s(): Attempting to remove memoy in range "
+			"%lx to %lx\n", __func__, start, start+size);
+	/*
+	 * check for range within RMO
+	 */
+	zone = page_zone(pfn_to_page(start_pfn));
+
+	printk("%s(): memory will be removed from "
+			"the %s zone\n", __func__, zone->name);
+
+	/*
+	 * not handling removing memory ranges that
+	 * overlap multiple zones yet
+	 */
+	if (end_pfn > (zone->zone_start_pfn + zone->spanned_pages))
+		goto overlap;
+
+	/* make sure it is NOT in RMO */
+	if ((start < lmb.rmo_size) || ((start+size) < lmb.rmo_size)) {
+		printk("%s(): range to be removed must NOT be in RMO!\n",
+			__func__);
+		goto in_rmo;
+	}
+
+	return __remove_pages(zone, start_pfn, nr_pages);
+
+overlap:
+	printk("%s(): memory range to be removed overlaps "
+		"multiple zones!!!\n", __func__);
+in_rmo:
+	return -1;
+}
+#endif /* CONFIG_MEMORY_HOTPLUG */
+
+void show_mem(void)
+{
+	unsigned long total = 0, reserved = 0;
+	unsigned long shared = 0, cached = 0;
+	unsigned long highmem = 0;
+	struct page *page;
+	pg_data_t *pgdat;
+	unsigned long i;
+
+	printk("Mem-info:\n");
+	show_free_areas();
+	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
+	for_each_pgdat(pgdat) {
+		unsigned long flags;
+		pgdat_resize_lock(pgdat, &flags);
+		for (i = 0; i < pgdat->node_spanned_pages; i++) {
+			if (!pfn_valid(pgdat->node_start_pfn + i))
+				continue;
+			page = pgdat_page_nr(pgdat, i);
+			total++;
+			if (PageHighMem(page))
+				highmem++;
+			if (PageReserved(page))
+				reserved++;
+			else if (PageSwapCache(page))
+				cached++;
+			else if (page_count(page))
+				shared += page_count(page) - 1;
+		}
+		pgdat_resize_unlock(pgdat, &flags);
+	}
+	printk("%ld pages of RAM\n", total);
+#ifdef CONFIG_HIGHMEM
+	printk("%ld pages of HIGHMEM\n", highmem);
+#endif
+	printk("%ld reserved pages\n", reserved);
+	printk("%ld pages shared\n", shared);
+	printk("%ld pages swap cached\n", cached);
+}
+
+/*
+ * Initialize the bootmem system and give it all the memory we
+ * have available.  If we are using highmem, we only put the
+ * lowmem into the bootmem system.
+ */
+#ifndef CONFIG_NEED_MULTIPLE_NODES
+void __init do_init_bootmem(void)
+{
+	unsigned long i;
+	unsigned long start, bootmap_pages;
+	unsigned long total_pages;
+	int boot_mapsize;
+
+	max_pfn = total_pages = lmb_end_of_DRAM() >> PAGE_SHIFT;
+#ifdef CONFIG_HIGHMEM
+	total_pages = total_lowmem >> PAGE_SHIFT;
+#endif
+
+	/*
+	 * Find an area to use for the bootmem bitmap.  Calculate the size of
+	 * bitmap required as (Total Memory) / PAGE_SIZE / BITS_PER_BYTE.
+	 * Add 1 additional page in case the address isn't page-aligned.
+	 */
+	bootmap_pages = bootmem_bootmap_pages(total_pages);
+
+	start = lmb_alloc(bootmap_pages << PAGE_SHIFT, PAGE_SIZE);
+	BUG_ON(!start);
+
+	boot_mapsize = init_bootmem(start >> PAGE_SHIFT, total_pages);
+
+	/* Add all physical memory to the bootmem map, mark each area
+	 * present.
+	 */
+	for (i = 0; i < lmb.memory.cnt; i++) {
+		unsigned long base = lmb.memory.region[i].base;
+		unsigned long size = lmb_size_bytes(&lmb.memory, i);
+#ifdef CONFIG_HIGHMEM
+		if (base >= total_lowmem)
+			continue;
+		if (base + size > total_lowmem)
+			size = total_lowmem - base;
+#endif
+		free_bootmem(base, size);
+	}
+
+	/* reserve the sections we're already using */
+	for (i = 0; i < lmb.reserved.cnt; i++)
+		reserve_bootmem(lmb.reserved.region[i].base,
+				lmb_size_bytes(&lmb.reserved, i));
+
+	/* XXX need to clip this if using highmem? */
+	for (i = 0; i < lmb.memory.cnt; i++)
+		memory_present(0, lmb_start_pfn(&lmb.memory, i),
+			       lmb_end_pfn(&lmb.memory, i));
+	init_bootmem_done = 1;
+}
+
+/*
+ * paging_init() sets up the page tables - in fact we've already done this.
+ */
+void __init paging_init(void)
+{
+	unsigned long zones_size[MAX_NR_ZONES];
+	unsigned long zholes_size[MAX_NR_ZONES];
+	unsigned long total_ram = lmb_phys_mem_size();
+	unsigned long top_of_ram = lmb_end_of_DRAM();
+
+#ifdef CONFIG_HIGHMEM
+	map_page(PKMAP_BASE, 0, 0);	/* XXX gross */
+	pkmap_page_table = pte_offset_kernel(pmd_offset(pgd_offset_k
+			(PKMAP_BASE), PKMAP_BASE), PKMAP_BASE);
+	map_page(KMAP_FIX_BEGIN, 0, 0);	/* XXX gross */
+	kmap_pte = pte_offset_kernel(pmd_offset(pgd_offset_k
+			(KMAP_FIX_BEGIN), KMAP_FIX_BEGIN), KMAP_FIX_BEGIN);
+	kmap_prot = PAGE_KERNEL;
+#endif /* CONFIG_HIGHMEM */
+
+	printk(KERN_INFO "Top of RAM: 0x%lx, Total RAM: 0x%lx\n",
+	       top_of_ram, total_ram);
+	printk(KERN_INFO "Memory hole size: %ldMB\n",
+	       (top_of_ram - total_ram) >> 20);
+	/*
+	 * All pages are DMA-able so we put them all in the DMA zone.
+	 */
+	memset(zones_size, 0, sizeof(zones_size));
+	memset(zholes_size, 0, sizeof(zholes_size));
+
+	zones_size[ZONE_DMA] = top_of_ram >> PAGE_SHIFT;
+	zholes_size[ZONE_DMA] = (top_of_ram - total_ram) >> PAGE_SHIFT;
+
+#ifdef CONFIG_HIGHMEM
+	zones_size[ZONE_DMA] = total_lowmem >> PAGE_SHIFT;
+	zones_size[ZONE_HIGHMEM] = (total_memory - total_lowmem) >> PAGE_SHIFT;
+	zholes_size[ZONE_HIGHMEM] = (top_of_ram - total_ram) >> PAGE_SHIFT;
+#else
+	zones_size[ZONE_DMA] = top_of_ram >> PAGE_SHIFT;
+	zholes_size[ZONE_DMA] = (top_of_ram - total_ram) >> PAGE_SHIFT;
+#endif /* CONFIG_HIGHMEM */
+
+	free_area_init_node(0, NODE_DATA(0), zones_size,
+			    __pa(PAGE_OFFSET) >> PAGE_SHIFT, zholes_size);
+}
+#endif /* ! CONFIG_NEED_MULTIPLE_NODES */
+
+void __init mem_init(void)
+{
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+	int nid;
+#endif
+	pg_data_t *pgdat;
+	unsigned long i;
+	struct page *page;
+	unsigned long reservedpages = 0, codesize, initsize, datasize, bsssize;
+
+	num_physpages = lmb.memory.size >> PAGE_SHIFT;
+	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
+
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+        for_each_online_node(nid) {
+		if (NODE_DATA(nid)->node_spanned_pages != 0) {
+			printk("freeing bootmem node %x\n", nid);
+			totalram_pages +=
+				free_all_bootmem_node(NODE_DATA(nid));
+		}
+	}
+#else
+	max_mapnr = max_pfn;
+	totalram_pages += free_all_bootmem();
+#endif
+	for_each_pgdat(pgdat) {
+		for (i = 0; i < pgdat->node_spanned_pages; i++) {
+			if (!pfn_valid(pgdat->node_start_pfn + i))
+				continue;
+			page = pgdat_page_nr(pgdat, i);
+			if (PageReserved(page))
+				reservedpages++;
+		}
+	}
+
+	codesize = (unsigned long)&_sdata - (unsigned long)&_stext;
+	datasize = (unsigned long)&_edata - (unsigned long)&_sdata;
+	initsize = (unsigned long)&__init_end - (unsigned long)&__init_begin;
+	bsssize = (unsigned long)&__bss_stop - (unsigned long)&__bss_start;
+
+#ifdef CONFIG_HIGHMEM
+	{
+		unsigned long pfn, highmem_mapnr;
+
+		highmem_mapnr = total_lowmem >> PAGE_SHIFT;
+		for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) {
+			struct page *page = pfn_to_page(pfn);
+
+			ClearPageReserved(page);
+			set_page_count(page, 1);
+			__free_page(page);
+			totalhigh_pages++;
+		}
+		totalram_pages += totalhigh_pages;
+		printk(KERN_INFO "High memory: %luk\n",
+		       totalhigh_pages << (PAGE_SHIFT-10));
+	}
+#endif /* CONFIG_HIGHMEM */
+
+	printk(KERN_INFO "Memory: %luk/%luk available (%luk kernel code, "
+	       "%luk reserved, %luk data, %luk bss, %luk init)\n",
+		(unsigned long)nr_free_pages() << (PAGE_SHIFT-10),
+		num_physpages << (PAGE_SHIFT-10),
+		codesize >> 10,
+		reservedpages << (PAGE_SHIFT-10),
+		datasize >> 10,
+		bsssize >> 10,
+		initsize >> 10);
+
+	mem_init_done = 1;
+
+	/* Initialize the vDSO */
+	vdso_init();
+}
+
+/*
+ * This is called when a page has been modified by the kernel.
+ * It just marks the page as not i-cache clean.  We do the i-cache
+ * flush later when the page is given to a user process, if necessary.
+ */
+void flush_dcache_page(struct page *page)
+{
+	if (cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
+		return;
+	/* avoid an atomic op if possible */
+	if (test_bit(PG_arch_1, &page->flags))
+		clear_bit(PG_arch_1, &page->flags);
+}
+EXPORT_SYMBOL(flush_dcache_page);
+
+void flush_dcache_icache_page(struct page *page)
+{
+#ifdef CONFIG_BOOKE
+	void *start = kmap_atomic(page, KM_PPC_SYNC_ICACHE);
+	__flush_dcache_icache(start);
+	kunmap_atomic(start, KM_PPC_SYNC_ICACHE);
+#elif defined(CONFIG_8xx) || defined(CONFIG_PPC64)
+	/* On 8xx there is no need to kmap since highmem is not supported */
+	__flush_dcache_icache(page_address(page)); 
+#else
+	__flush_dcache_icache_phys(page_to_pfn(page) << PAGE_SHIFT);
+#endif
+
+}
+void clear_user_page(void *page, unsigned long vaddr, struct page *pg)
+{
+	clear_page(page);
+
+	if (cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
+		return;
+	/*
+	 * We shouldnt have to do this, but some versions of glibc
+	 * require it (ld.so assumes zero filled pages are icache clean)
+	 * - Anton
+	 */
+
+	/* avoid an atomic op if possible */
+	if (test_bit(PG_arch_1, &pg->flags))
+		clear_bit(PG_arch_1, &pg->flags);
+}
+EXPORT_SYMBOL(clear_user_page);
+
+void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
+		    struct page *pg)
+{
+	copy_page(vto, vfrom);
+
+	/*
+	 * We should be able to use the following optimisation, however
+	 * there are two problems.
+	 * Firstly a bug in some versions of binutils meant PLT sections
+	 * were not marked executable.
+	 * Secondly the first word in the GOT section is blrl, used
+	 * to establish the GOT address. Until recently the GOT was
+	 * not marked executable.
+	 * - Anton
+	 */
+#if 0
+	if (!vma->vm_file && ((vma->vm_flags & VM_EXEC) == 0))
+		return;
+#endif
+
+	if (cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
+		return;
+
+	/* avoid an atomic op if possible */
+	if (test_bit(PG_arch_1, &pg->flags))
+		clear_bit(PG_arch_1, &pg->flags);
+}
+
+void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
+			     unsigned long addr, int len)
+{
+	unsigned long maddr;
+
+	maddr = (unsigned long) kmap(page) + (addr & ~PAGE_MASK);
+	flush_icache_range(maddr, maddr + len);
+	kunmap(page);
+}
+EXPORT_SYMBOL(flush_icache_user_range);
+
+/*
+ * This is called at the end of handling a user page fault, when the
+ * fault has been handled by updating a PTE in the linux page tables.
+ * We use it to preload an HPTE into the hash table corresponding to
+ * the updated linux PTE.
+ * 
+ * This must always be called with the pte lock held.
+ */
+void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
+		      pte_t pte)
+{
+#ifdef CONFIG_PPC_STD_MMU
+	unsigned long access = 0, trap;
+#endif
+	unsigned long pfn = pte_pfn(pte);
+
+	/* handle i-cache coherency */
+	if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE) &&
+	    !cpu_has_feature(CPU_FTR_NOEXECUTE) &&
+	    pfn_valid(pfn)) {
+		struct page *page = pfn_to_page(pfn);
+		if (!PageReserved(page)
+		    && !test_bit(PG_arch_1, &page->flags)) {
+			if (vma->vm_mm == current->active_mm) {
+#ifdef CONFIG_8xx
+			/* On 8xx, cache control instructions (particularly 
+		 	 * "dcbst" from flush_dcache_icache) fault as write 
+			 * operation if there is an unpopulated TLB entry 
+			 * for the address in question. To workaround that, 
+			 * we invalidate the TLB here, thus avoiding dcbst 
+			 * misbehaviour.
+			 */
+				_tlbie(address);
+#endif
+				__flush_dcache_icache((void *) address);
+			} else
+				flush_dcache_icache_page(page);
+			set_bit(PG_arch_1, &page->flags);
+		}
+	}
+
+#ifdef CONFIG_PPC_STD_MMU
+	/* We only want HPTEs for linux PTEs that have _PAGE_ACCESSED set */
+	if (!pte_young(pte) || address >= TASK_SIZE)
+		return;
+
+	/* We try to figure out if we are coming from an instruction
+	 * access fault and pass that down to __hash_page so we avoid
+	 * double-faulting on execution of fresh text. We have to test
+	 * for regs NULL since init will get here first thing at boot
+	 *
+	 * We also avoid filling the hash if not coming from a fault
+	 */
+	if (current->thread.regs == NULL)
+		return;
+	trap = TRAP(current->thread.regs);
+	if (trap == 0x400)
+		access |= _PAGE_EXEC;
+	else if (trap != 0x300)
+		return;
+	hash_preload(vma->vm_mm, address, access, trap);
+#endif /* CONFIG_PPC_STD_MMU */
+}
diff --git a/arch/ppc64/mm/mmap.c b/arch/powerpc/mm/mmap.c
index fe65f522aff3..fe65f522aff3 100644
--- a/arch/ppc64/mm/mmap.c
+++ b/arch/powerpc/mm/mmap.c
diff --git a/arch/powerpc/mm/mmu_context_32.c b/arch/powerpc/mm/mmu_context_32.c
new file mode 100644
index 000000000000..a8816e0f6a86
--- /dev/null
+++ b/arch/powerpc/mm/mmu_context_32.c
@@ -0,0 +1,86 @@
+/*
+ * This file contains the routines for handling the MMU on those
+ * PowerPC implementations where the MMU substantially follows the
+ * architecture specification.  This includes the 6xx, 7xx, 7xxx,
+ * 8260, and POWER3 implementations but excludes the 8xx and 4xx.
+ *  -- paulus
+ *
+ *  Derived from arch/ppc/mm/init.c:
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ *    Copyright (C) 1996 Paul Mackerras
+ *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ *  Derived from "arch/i386/mm/init.c"
+ *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+
+#include <asm/mmu_context.h>
+#include <asm/tlbflush.h>
+
+mm_context_t next_mmu_context;
+unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1];
+#ifdef FEW_CONTEXTS
+atomic_t nr_free_contexts;
+struct mm_struct *context_mm[LAST_CONTEXT+1];
+void steal_context(void);
+#endif /* FEW_CONTEXTS */
+
+/*
+ * Initialize the context management stuff.
+ */
+void __init
+mmu_context_init(void)
+{
+	/*
+	 * Some processors have too few contexts to reserve one for
+	 * init_mm, and require using context 0 for a normal task.
+	 * Other processors reserve the use of context zero for the kernel.
+	 * This code assumes FIRST_CONTEXT < 32.
+	 */
+	context_map[0] = (1 << FIRST_CONTEXT) - 1;
+	next_mmu_context = FIRST_CONTEXT;
+#ifdef FEW_CONTEXTS
+	atomic_set(&nr_free_contexts, LAST_CONTEXT - FIRST_CONTEXT + 1);
+#endif /* FEW_CONTEXTS */
+}
+
+#ifdef FEW_CONTEXTS
+/*
+ * Steal a context from a task that has one at the moment.
+ * This is only used on 8xx and 4xx and we presently assume that
+ * they don't do SMP.  If they do then this will have to check
+ * whether the MM we steal is in use.
+ * We also assume that this is only used on systems that don't
+ * use an MMU hash table - this is true for 8xx and 4xx.
+ * This isn't an LRU system, it just frees up each context in
+ * turn (sort-of pseudo-random replacement :).  This would be the
+ * place to implement an LRU scheme if anyone was motivated to do it.
+ *  -- paulus
+ */
+void
+steal_context(void)
+{
+	struct mm_struct *mm;
+
+	/* free up context `next_mmu_context' */
+	/* if we shouldn't free context 0, don't... */
+	if (next_mmu_context < FIRST_CONTEXT)
+		next_mmu_context = FIRST_CONTEXT;
+	mm = context_mm[next_mmu_context];
+	flush_tlb_mm(mm);
+	destroy_context(mm);
+}
+#endif /* FEW_CONTEXTS */
diff --git a/arch/powerpc/mm/mmu_context_64.c b/arch/powerpc/mm/mmu_context_64.c
new file mode 100644
index 000000000000..714a84dd8d5d
--- /dev/null
+++ b/arch/powerpc/mm/mmu_context_64.c
@@ -0,0 +1,63 @@
+/*
+ *  MMU context allocation for 64-bit kernels.
+ *
+ *  Copyright (C) 2004 Anton Blanchard, IBM Corp. <anton@samba.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/spinlock.h>
+#include <linux/idr.h>
+
+#include <asm/mmu_context.h>
+
+static DEFINE_SPINLOCK(mmu_context_lock);
+static DEFINE_IDR(mmu_context_idr);
+
+int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	int index;
+	int err;
+
+again:
+	if (!idr_pre_get(&mmu_context_idr, GFP_KERNEL))
+		return -ENOMEM;
+
+	spin_lock(&mmu_context_lock);
+	err = idr_get_new_above(&mmu_context_idr, NULL, 1, &index);
+	spin_unlock(&mmu_context_lock);
+
+	if (err == -EAGAIN)
+		goto again;
+	else if (err)
+		return err;
+
+	if (index > MAX_CONTEXT) {
+		idr_remove(&mmu_context_idr, index);
+		return -ENOMEM;
+	}
+
+	mm->context.id = index;
+
+	return 0;
+}
+
+void destroy_context(struct mm_struct *mm)
+{
+	spin_lock(&mmu_context_lock);
+	idr_remove(&mmu_context_idr, mm->context.id);
+	spin_unlock(&mmu_context_lock);
+
+	mm->context.id = NO_CONTEXT;
+}
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
new file mode 100644
index 000000000000..bea2d21ac6f7
--- /dev/null
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -0,0 +1,99 @@
+/*
+ * Declarations of procedures and variables shared between files
+ * in arch/ppc/mm/.
+ *
+ *  Derived from arch/ppc/mm/init.c:
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ *    Copyright (C) 1996 Paul Mackerras
+ *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ *  Derived from "arch/i386/mm/init.c"
+ *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+#include <asm/tlbflush.h>
+#include <asm/mmu.h>
+
+#ifdef CONFIG_PPC32
+extern void mapin_ram(void);
+extern int map_page(unsigned long va, phys_addr_t pa, int flags);
+extern void setbat(int index, unsigned long virt, unsigned long phys,
+		   unsigned int size, int flags);
+extern void settlbcam(int index, unsigned long virt, phys_addr_t phys,
+		      unsigned int size, int flags, unsigned int pid);
+extern void invalidate_tlbcam_entry(int index);
+
+extern int __map_without_bats;
+extern unsigned long ioremap_base;
+extern unsigned int rtas_data, rtas_size;
+
+extern PTE *Hash, *Hash_end;
+extern unsigned long Hash_size, Hash_mask;
+
+extern unsigned int num_tlbcam_entries;
+#endif
+
+extern unsigned long ioremap_bot;
+extern unsigned long __max_low_memory;
+extern unsigned long __initial_memory_limit;
+extern unsigned long total_memory;
+extern unsigned long total_lowmem;
+
+/* ...and now those things that may be slightly different between processor
+ * architectures.  -- Dan
+ */
+#if defined(CONFIG_8xx)
+#define flush_HPTE(X, va, pg)	_tlbie(va)
+#define MMU_init_hw()		do { } while(0)
+#define mmu_mapin_ram()		(0UL)
+
+#elif defined(CONFIG_4xx)
+#define flush_HPTE(X, va, pg)	_tlbie(va)
+extern void MMU_init_hw(void);
+extern unsigned long mmu_mapin_ram(void);
+
+#elif defined(CONFIG_FSL_BOOKE)
+#define flush_HPTE(X, va, pg)	_tlbie(va)
+extern void MMU_init_hw(void);
+extern unsigned long mmu_mapin_ram(void);
+extern void adjust_total_lowmem(void);
+
+#elif defined(CONFIG_PPC32)
+/* anything 32-bit except 4xx or 8xx */
+extern void MMU_init_hw(void);
+extern unsigned long mmu_mapin_ram(void);
+
+/* Be careful....this needs to be updated if we ever encounter 603 SMPs,
+ * which includes all new 82xx processors.  We need tlbie/tlbsync here
+ * in that case (I think). -- Dan.
+ */
+static inline void flush_HPTE(unsigned context, unsigned long va,
+			      unsigned long pdval)
+{
+	if ((Hash != 0) &&
+	    cpu_has_feature(CPU_FTR_HPTE_TABLE))
+		flush_hash_pages(0, va, pdval, 1);
+	else
+		_tlbie(va);
+}
+#else /* CONFIG_PPC64 */
+/* imalloc region types */
+#define IM_REGION_UNUSED	0x1
+#define IM_REGION_SUBSET	0x2
+#define IM_REGION_EXISTS	0x4
+#define IM_REGION_OVERLAP	0x8
+#define IM_REGION_SUPERSET	0x10
+
+extern struct vm_struct * im_get_free_area(unsigned long size);
+extern struct vm_struct * im_get_area(unsigned long v_addr, unsigned long size,
+				      int region_type);
+extern void im_free(void *addr);
+#endif
diff --git a/arch/ppc64/mm/numa.c b/arch/powerpc/mm/numa.c
index cb864b8f2750..f72cf87364cb 100644
--- a/arch/ppc64/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -17,54 +17,123 @@
 #include <linux/nodemask.h>
 #include <linux/cpu.h>
 #include <linux/notifier.h>
+#include <asm/sparsemem.h>
 #include <asm/lmb.h>
-#include <asm/machdep.h>
-#include <asm/abs_addr.h>
+#include <asm/system.h>
+#include <asm/smp.h>
 
 static int numa_enabled = 1;
 
 static int numa_debug;
 #define dbg(args...) if (numa_debug) { printk(KERN_INFO args); }
 
-#ifdef DEBUG_NUMA
-#define ARRAY_INITIALISER -1
-#else
-#define ARRAY_INITIALISER 0
-#endif
-
-int numa_cpu_lookup_table[NR_CPUS] = { [ 0 ... (NR_CPUS - 1)] =
-	ARRAY_INITIALISER};
-char *numa_memory_lookup_table;
+int numa_cpu_lookup_table[NR_CPUS];
 cpumask_t numa_cpumask_lookup_table[MAX_NUMNODES];
-int nr_cpus_in_node[MAX_NUMNODES] = { [0 ... (MAX_NUMNODES -1)] = 0};
-
 struct pglist_data *node_data[MAX_NUMNODES];
-bootmem_data_t __initdata plat_node_bdata[MAX_NUMNODES];
+
+EXPORT_SYMBOL(numa_cpu_lookup_table);
+EXPORT_SYMBOL(numa_cpumask_lookup_table);
+EXPORT_SYMBOL(node_data);
+
+static bootmem_data_t __initdata plat_node_bdata[MAX_NUMNODES];
 static int min_common_depth;
 
 /*
- * We need somewhere to store start/span for each node until we have
+ * We need somewhere to store start/end/node for each region until we have
  * allocated the real node_data structures.
  */
+#define MAX_REGIONS	(MAX_LMB_REGIONS*2)
 static struct {
-	unsigned long node_start_pfn;
-	unsigned long node_end_pfn;
-	unsigned long node_present_pages;
-} init_node_data[MAX_NUMNODES] __initdata;
+	unsigned long start_pfn;
+	unsigned long end_pfn;
+	int nid;
+} init_node_data[MAX_REGIONS] __initdata;
 
-EXPORT_SYMBOL(node_data);
-EXPORT_SYMBOL(numa_cpu_lookup_table);
-EXPORT_SYMBOL(numa_memory_lookup_table);
-EXPORT_SYMBOL(numa_cpumask_lookup_table);
-EXPORT_SYMBOL(nr_cpus_in_node);
+int __init early_pfn_to_nid(unsigned long pfn)
+{
+	unsigned int i;
+
+	for (i = 0; init_node_data[i].end_pfn; i++) {
+		unsigned long start_pfn = init_node_data[i].start_pfn;
+		unsigned long end_pfn = init_node_data[i].end_pfn;
+
+		if ((start_pfn <= pfn) && (pfn < end_pfn))
+			return init_node_data[i].nid;
+	}
+
+	return -1;
+}
+
+void __init add_region(unsigned int nid, unsigned long start_pfn,
+		       unsigned long pages)
+{
+	unsigned int i;
+
+	dbg("add_region nid %d start_pfn 0x%lx pages 0x%lx\n",
+		nid, start_pfn, pages);
+
+	for (i = 0; init_node_data[i].end_pfn; i++) {
+		if (init_node_data[i].nid != nid)
+			continue;
+		if (init_node_data[i].end_pfn == start_pfn) {
+			init_node_data[i].end_pfn += pages;
+			return;
+		}
+		if (init_node_data[i].start_pfn == (start_pfn + pages)) {
+			init_node_data[i].start_pfn -= pages;
+			return;
+		}
+	}
+
+	/*
+	 * Leave last entry NULL so we dont iterate off the end (we use
+	 * entry.end_pfn to terminate the walk).
+	 */
+	if (i >= (MAX_REGIONS - 1)) {
+		printk(KERN_ERR "WARNING: too many memory regions in "
+				"numa code, truncating\n");
+		return;
+	}
+
+	init_node_data[i].start_pfn = start_pfn;
+	init_node_data[i].end_pfn = start_pfn + pages;
+	init_node_data[i].nid = nid;
+}
+
+/* We assume init_node_data has no overlapping regions */
+void __init get_region(unsigned int nid, unsigned long *start_pfn,
+		       unsigned long *end_pfn, unsigned long *pages_present)
+{
+	unsigned int i;
+
+	*start_pfn = -1UL;
+	*end_pfn = *pages_present = 0;
+
+	for (i = 0; init_node_data[i].end_pfn; i++) {
+		if (init_node_data[i].nid != nid)
+			continue;
+
+		*pages_present += init_node_data[i].end_pfn -
+			init_node_data[i].start_pfn;
+
+		if (init_node_data[i].start_pfn < *start_pfn)
+			*start_pfn = init_node_data[i].start_pfn;
+
+		if (init_node_data[i].end_pfn > *end_pfn)
+			*end_pfn = init_node_data[i].end_pfn;
+	}
+
+	/* We didnt find a matching region, return start/end as 0 */
+	if (*start_pfn == -1UL)
+		start_pfn = 0;
+}
 
 static inline void map_cpu_to_node(int cpu, int node)
 {
 	numa_cpu_lookup_table[cpu] = node;
-	if (!(cpu_isset(cpu, numa_cpumask_lookup_table[node]))) {
+
+	if (!(cpu_isset(cpu, numa_cpumask_lookup_table[node])))
 		cpu_set(cpu, numa_cpumask_lookup_table[node]);
-		nr_cpus_in_node[node]++;
-	}
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
@@ -76,7 +145,6 @@ static void unmap_cpu_from_node(unsigned long cpu)
 
 	if (cpu_isset(cpu, numa_cpumask_lookup_table[node])) {
 		cpu_clear(cpu, numa_cpumask_lookup_table[node]);
-		nr_cpus_in_node[node]--;
 	} else {
 		printk(KERN_ERR "WARNING: cpu %lu not found in node %d\n",
 		       cpu, node);
@@ -84,7 +152,7 @@ static void unmap_cpu_from_node(unsigned long cpu)
 }
 #endif /* CONFIG_HOTPLUG_CPU */
 
-static struct device_node * __devinit find_cpu_node(unsigned int cpu)
+static struct device_node *find_cpu_node(unsigned int cpu)
 {
 	unsigned int hw_cpuid = get_hard_smp_processor_id(cpu);
 	struct device_node *cpu_node = NULL;
@@ -211,7 +279,7 @@ static int __init get_mem_size_cells(void)
 	return rc;
 }
 
-static unsigned long read_n_cells(int n, unsigned int **buf)
+static unsigned long __init read_n_cells(int n, unsigned int **buf)
 {
 	unsigned long result = 0;
 
@@ -293,14 +361,14 @@ static int cpu_numa_callback(struct notifier_block *nfb,
  * or zero. If the returned value of size is 0 the region should be
  * discarded as it lies wholy above the memory limit.
  */
-static unsigned long __init numa_enforce_memory_limit(unsigned long start, unsigned long size)
+static unsigned long __init numa_enforce_memory_limit(unsigned long start,
+						      unsigned long size)
 {
 	/*
 	 * We use lmb_end_of_DRAM() in here instead of memory_limit because
 	 * we've already adjusted it for the limit and it takes care of
 	 * having memory holes below the limit.
 	 */
-	extern unsigned long memory_limit;
 
 	if (! memory_limit)
 		return size;
@@ -319,8 +387,7 @@ static int __init parse_numa_properties(void)
 	struct device_node *cpu = NULL;
 	struct device_node *memory = NULL;
 	int addr_cells, size_cells;
-	int max_domain = 0;
-	long entries = lmb_end_of_DRAM() >> MEMORY_INCREMENT_SHIFT;
+	int max_domain;
 	unsigned long i;
 
 	if (numa_enabled == 0) {
@@ -328,13 +395,6 @@ static int __init parse_numa_properties(void)
 		return -1;
 	}
 
-	numa_memory_lookup_table =
-		(char *)abs_to_virt(lmb_alloc(entries * sizeof(char), 1));
-	memset(numa_memory_lookup_table, 0, entries * sizeof(char));
-
-	for (i = 0; i < entries ; i++)
-		numa_memory_lookup_table[i] = ARRAY_INITIALISER;
-
 	min_common_depth = find_min_common_depth();
 
 	dbg("NUMA associativity depth for CPU/Memory: %d\n", min_common_depth);
@@ -386,9 +446,6 @@ new_range:
 		start = read_n_cells(addr_cells, &memcell_buf);
 		size = read_n_cells(size_cells, &memcell_buf);
 
-		start = _ALIGN_DOWN(start, MEMORY_INCREMENT);
-		size = _ALIGN_UP(size, MEMORY_INCREMENT);
-
 		numa_domain = of_node_numa_domain(memory);
 
 		if (numa_domain >= MAX_NUMNODES) {
@@ -402,44 +459,15 @@ new_range:
 		if (max_domain < numa_domain)
 			max_domain = numa_domain;
 
-		if (! (size = numa_enforce_memory_limit(start, size))) {
+		if (!(size = numa_enforce_memory_limit(start, size))) {
 			if (--ranges)
 				goto new_range;
 			else
 				continue;
 		}
 
-		/*
-		 * Initialize new node struct, or add to an existing one.
-		 */
-		if (init_node_data[numa_domain].node_end_pfn) {
-			if ((start / PAGE_SIZE) <
-			    init_node_data[numa_domain].node_start_pfn)
-				init_node_data[numa_domain].node_start_pfn =
-					start / PAGE_SIZE;
-			if (((start / PAGE_SIZE) + (size / PAGE_SIZE)) >
-			    init_node_data[numa_domain].node_end_pfn)
-				init_node_data[numa_domain].node_end_pfn =
-					(start / PAGE_SIZE) +
-					(size / PAGE_SIZE);
-
-			init_node_data[numa_domain].node_present_pages +=
-				size / PAGE_SIZE;
-		} else {
-			node_set_online(numa_domain);
-
-			init_node_data[numa_domain].node_start_pfn =
-				start / PAGE_SIZE;
-			init_node_data[numa_domain].node_end_pfn =
-				init_node_data[numa_domain].node_start_pfn +
-				size / PAGE_SIZE;
-			init_node_data[numa_domain].node_present_pages =
-				size / PAGE_SIZE;
-		}
-
-		for (i = start ; i < (start+size); i += MEMORY_INCREMENT)
-			numa_memory_lookup_table[i >> MEMORY_INCREMENT_SHIFT] =
-				numa_domain;
+		add_region(numa_domain, start >> PAGE_SHIFT,
+			   size >> PAGE_SHIFT);
 
 		if (--ranges)
 			goto new_range;
@@ -455,32 +483,18 @@ static void __init setup_nonnuma(void)
 {
 	unsigned long top_of_ram = lmb_end_of_DRAM();
 	unsigned long total_ram = lmb_phys_mem_size();
-	unsigned long i;
+	unsigned int i;
 
 	printk(KERN_INFO "Top of RAM: 0x%lx, Total RAM: 0x%lx\n",
 	       top_of_ram, total_ram);
 	printk(KERN_INFO "Memory hole size: %ldMB\n",
 	       (top_of_ram - total_ram) >> 20);
 
-	if (!numa_memory_lookup_table) {
-		long entries = top_of_ram >> MEMORY_INCREMENT_SHIFT;
-		numa_memory_lookup_table =
-			(char *)abs_to_virt(lmb_alloc(entries * sizeof(char), 1));
-		memset(numa_memory_lookup_table, 0, entries * sizeof(char));
-		for (i = 0; i < entries ; i++)
-			numa_memory_lookup_table[i] = ARRAY_INITIALISER;
-	}
-
 	map_cpu_to_node(boot_cpuid, 0);
-
+	for (i = 0; i < lmb.memory.cnt; ++i)
+		add_region(0, lmb.memory.region[i].base >> PAGE_SHIFT,
+			   lmb_size_pages(&lmb.memory, i));
 	node_set_online(0);
-
-	init_node_data[0].node_start_pfn = 0;
-	init_node_data[0].node_end_pfn = lmb_end_of_DRAM() / PAGE_SIZE;
-	init_node_data[0].node_present_pages = total_ram / PAGE_SIZE;
-
-	for (i = 0 ; i < top_of_ram; i += MEMORY_INCREMENT)
-		numa_memory_lookup_table[i >> MEMORY_INCREMENT_SHIFT] = 0;
 }
 
 static void __init dump_numa_topology(void)
@@ -498,8 +512,9 @@ static void __init dump_numa_topology(void)
 
 		count = 0;
 
-		for (i = 0; i < lmb_end_of_DRAM(); i += MEMORY_INCREMENT) {
-			if (numa_memory_lookup_table[i >> MEMORY_INCREMENT_SHIFT] == node) {
+		for (i = 0; i < lmb_end_of_DRAM();
+		     i += (1 << SECTION_SIZE_BITS)) {
+			if (early_pfn_to_nid(i >> PAGE_SHIFT) == node) {
 				if (count == 0)
 					printk(" 0x%lx", i);
 				++count;
@@ -524,10 +539,12 @@ static void __init dump_numa_topology(void)
  *
  * Returns the physical address of the memory.
  */
-static unsigned long careful_allocation(int nid, unsigned long size,
-					unsigned long align, unsigned long end)
+static void __init *careful_allocation(int nid, unsigned long size,
+				       unsigned long align,
+				       unsigned long end_pfn)
 {
-	unsigned long ret = lmb_alloc_base(size, align, end);
+	int new_nid;
+	unsigned long ret = lmb_alloc_base(size, align, end_pfn << PAGE_SHIFT);
 
 	/* retry over all memory */
 	if (!ret)
@@ -541,28 +558,27 @@ static unsigned long careful_allocation(int nid, unsigned long size,
 	 * If the memory came from a previously allocated node, we must
 	 * retry with the bootmem allocator.
 	 */
-	if (pa_to_nid(ret) < nid) {
-		nid = pa_to_nid(ret);
-		ret = (unsigned long)__alloc_bootmem_node(NODE_DATA(nid),
+	new_nid = early_pfn_to_nid(ret >> PAGE_SHIFT);
+	if (new_nid < nid) {
+		ret = (unsigned long)__alloc_bootmem_node(NODE_DATA(new_nid),
 				size, align, 0);
 
 		if (!ret)
 			panic("numa.c: cannot allocate %lu bytes on node %d",
-			      size, nid);
+			      size, new_nid);
 
-		ret = virt_to_abs(ret);
+		ret = __pa(ret);
 
 		dbg("alloc_bootmem %lx %lx\n", ret, size);
 	}
 
-	return ret;
+	return (void *)ret;
 }
 
 void __init do_init_bootmem(void)
 {
 	int nid;
-	int addr_cells, size_cells;
-	struct device_node *memory = NULL;
+	unsigned int i;
 	static struct notifier_block ppc64_numa_nb = {
 		.notifier_call = cpu_numa_callback,
 		.priority = 1 /* Must run before sched domains notifier. */
@@ -580,99 +596,66 @@ void __init do_init_bootmem(void)
 	register_cpu_notifier(&ppc64_numa_nb);
 
 	for_each_online_node(nid) {
-		unsigned long start_paddr, end_paddr;
-		int i;
+		unsigned long start_pfn, end_pfn, pages_present;
 		unsigned long bootmem_paddr;
 		unsigned long bootmap_pages;
 
-		start_paddr = init_node_data[nid].node_start_pfn * PAGE_SIZE;
-		end_paddr = init_node_data[nid].node_end_pfn * PAGE_SIZE;
+		get_region(nid, &start_pfn, &end_pfn, &pages_present);
 
 		/* Allocate the node structure node local if possible */
-		NODE_DATA(nid) = (struct pglist_data *)careful_allocation(nid,
+		NODE_DATA(nid) = careful_allocation(nid,
 					sizeof(struct pglist_data),
-					SMP_CACHE_BYTES, end_paddr);
-		NODE_DATA(nid) = abs_to_virt(NODE_DATA(nid));
+					SMP_CACHE_BYTES, end_pfn);
+		NODE_DATA(nid) = __va(NODE_DATA(nid));
 		memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
 
   		dbg("node %d\n", nid);
 		dbg("NODE_DATA() = %p\n", NODE_DATA(nid));
 
 		NODE_DATA(nid)->bdata = &plat_node_bdata[nid];
-		NODE_DATA(nid)->node_start_pfn =
-			init_node_data[nid].node_start_pfn;
-		NODE_DATA(nid)->node_spanned_pages =
-			end_paddr - start_paddr;
+		NODE_DATA(nid)->node_start_pfn = start_pfn;
+		NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn;
 
 		if (NODE_DATA(nid)->node_spanned_pages == 0)
   			continue;
 
-  		dbg("start_paddr = %lx\n", start_paddr);
-  		dbg("end_paddr = %lx\n", end_paddr);
+  		dbg("start_paddr = %lx\n", start_pfn << PAGE_SHIFT);
+  		dbg("end_paddr = %lx\n", end_pfn << PAGE_SHIFT);
 
-		bootmap_pages = bootmem_bootmap_pages((end_paddr - start_paddr) >> PAGE_SHIFT);
+		bootmap_pages = bootmem_bootmap_pages(end_pfn - start_pfn);
+		bootmem_paddr = (unsigned long)careful_allocation(nid,
+					bootmap_pages << PAGE_SHIFT,
+					PAGE_SIZE, end_pfn);
+		memset(__va(bootmem_paddr), 0, bootmap_pages << PAGE_SHIFT);
 
-		bootmem_paddr = careful_allocation(nid,
-				bootmap_pages << PAGE_SHIFT,
-				PAGE_SIZE, end_paddr);
-		memset(abs_to_virt(bootmem_paddr), 0,
-		       bootmap_pages << PAGE_SHIFT);
 		dbg("bootmap_paddr = %lx\n", bootmem_paddr);
 
 		init_bootmem_node(NODE_DATA(nid), bootmem_paddr >> PAGE_SHIFT,
-				  start_paddr >> PAGE_SHIFT,
-				  end_paddr >> PAGE_SHIFT);
+				  start_pfn, end_pfn);
 
-		/*
-		 * We need to do another scan of all memory sections to
-		 * associate memory with the correct node.
-		 */
-		addr_cells = get_mem_addr_cells();
-		size_cells = get_mem_size_cells();
-		memory = NULL;
-		while ((memory = of_find_node_by_type(memory, "memory")) != NULL) {
-			unsigned long mem_start, mem_size;
-			int numa_domain, ranges;
-			unsigned int *memcell_buf;
-			unsigned int len;
-
-			memcell_buf = (unsigned int *)get_property(memory, "reg", &len);
-			if (!memcell_buf || len <= 0)
-				continue;
+		/* Add free regions on this node */
+		for (i = 0; init_node_data[i].end_pfn; i++) {
+			unsigned long start, end;
 
-			ranges = memory->n_addrs;	/* ranges in cell */
-new_range:
-			mem_start = read_n_cells(addr_cells, &memcell_buf);
-			mem_size = read_n_cells(size_cells, &memcell_buf);
-			if (numa_enabled) {
-				numa_domain = of_node_numa_domain(memory);
-				if (numa_domain  >= MAX_NUMNODES)
-					numa_domain = 0;
-			} else
-				numa_domain =  0;
-
-			if (numa_domain != nid)
+			if (init_node_data[i].nid != nid)
 				continue;
 
-			mem_size = numa_enforce_memory_limit(mem_start, mem_size);
-  			if (mem_size) {
-  				dbg("free_bootmem %lx %lx\n", mem_start, mem_size);
-  				free_bootmem_node(NODE_DATA(nid), mem_start, mem_size);
-			}
+			start = init_node_data[i].start_pfn << PAGE_SHIFT;
+			end = init_node_data[i].end_pfn << PAGE_SHIFT;
 
-			if (--ranges)		/* process all ranges in cell */
-				goto new_range;
+			dbg("free_bootmem %lx %lx\n", start, end - start);
+  			free_bootmem_node(NODE_DATA(nid), start, end - start);
 		}
 
-		/*
-		 * Mark reserved regions on this node
-		 */
+		/* Mark reserved regions on this node */
 		for (i = 0; i < lmb.reserved.cnt; i++) {
 			unsigned long physbase = lmb.reserved.region[i].base;
 			unsigned long size = lmb.reserved.region[i].size;
+			unsigned long start_paddr = start_pfn << PAGE_SHIFT;
+			unsigned long end_paddr = end_pfn << PAGE_SHIFT;
 
-			if (pa_to_nid(physbase) != nid &&
-			    pa_to_nid(physbase+size-1) != nid)
+			if (early_pfn_to_nid(physbase >> PAGE_SHIFT) != nid &&
+			    early_pfn_to_nid((physbase+size-1) >> PAGE_SHIFT) != nid)
 				continue;
 
 			if (physbase < end_paddr &&
@@ -692,46 +675,19 @@ new_range:
 						     size);
 			}
 		}
-		/*
-		 * This loop may look famaliar, but we have to do it again
-		 * after marking our reserved memory to mark memory present
-		 * for sparsemem.
-		 */
-		addr_cells = get_mem_addr_cells();
-		size_cells = get_mem_size_cells();
-		memory = NULL;
-		while ((memory = of_find_node_by_type(memory, "memory")) != NULL) {
-			unsigned long mem_start, mem_size;
-			int numa_domain, ranges;
-			unsigned int *memcell_buf;
-			unsigned int len;
-
-			memcell_buf = (unsigned int *)get_property(memory, "reg", &len);
-			if (!memcell_buf || len <= 0)
-				continue;
 
-			ranges = memory->n_addrs;	/* ranges in cell */
-new_range2:
-			mem_start = read_n_cells(addr_cells, &memcell_buf);
-			mem_size = read_n_cells(size_cells, &memcell_buf);
-			if (numa_enabled) {
-				numa_domain = of_node_numa_domain(memory);
-				if (numa_domain  >= MAX_NUMNODES)
-					numa_domain = 0;
-			} else
-				numa_domain =  0;
-
-			if (numa_domain != nid)
+		/* Add regions into sparsemem */
+		for (i = 0; init_node_data[i].end_pfn; i++) {
+			unsigned long start, end;
+
+			if (init_node_data[i].nid != nid)
 				continue;
 
-			mem_size = numa_enforce_memory_limit(mem_start, mem_size);
-			memory_present(numa_domain, mem_start >> PAGE_SHIFT,
-				       (mem_start + mem_size) >> PAGE_SHIFT);
+			start = init_node_data[i].start_pfn;
+			end = init_node_data[i].end_pfn;
 
-			if (--ranges)		/* process all ranges in cell */
-				goto new_range2;
+			memory_present(nid, start, end);
 		}
-
 	}
 }
 
@@ -745,21 +701,18 @@ void __init paging_init(void)
 	memset(zholes_size, 0, sizeof(zholes_size));
 
 	for_each_online_node(nid) {
-		unsigned long start_pfn;
-		unsigned long end_pfn;
+		unsigned long start_pfn, end_pfn, pages_present;
 
-		start_pfn = init_node_data[nid].node_start_pfn;
-		end_pfn = init_node_data[nid].node_end_pfn;
+		get_region(nid, &start_pfn, &end_pfn, &pages_present);
 
 		zones_size[ZONE_DMA] = end_pfn - start_pfn;
-		zholes_size[ZONE_DMA] = zones_size[ZONE_DMA] -
-			init_node_data[nid].node_present_pages;
+		zholes_size[ZONE_DMA] = zones_size[ZONE_DMA] - pages_present;
 
 		dbg("free_area_init node %d %lx %lx (hole: %lx)\n", nid,
 		    zones_size[ZONE_DMA], start_pfn, zholes_size[ZONE_DMA]);
 
-		free_area_init_node(nid, NODE_DATA(nid), zones_size,
-							start_pfn, zholes_size);
+		free_area_init_node(nid, NODE_DATA(nid), zones_size, start_pfn,
+				    zholes_size);
 	}
 }
 
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
new file mode 100644
index 000000000000..f4e5ac122615
--- /dev/null
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -0,0 +1,467 @@
+/*
+ * This file contains the routines setting up the linux page tables.
+ *  -- paulus
+ *
+ *  Derived from arch/ppc/mm/init.c:
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ *    Copyright (C) 1996 Paul Mackerras
+ *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ *  Derived from "arch/i386/mm/init.c"
+ *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/highmem.h>
+
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/io.h>
+
+#include "mmu_decl.h"
+
+unsigned long ioremap_base;
+unsigned long ioremap_bot;
+int io_bat_index;
+
+#if defined(CONFIG_6xx) || defined(CONFIG_POWER3)
+#define HAVE_BATS	1
+#endif
+
+#if defined(CONFIG_FSL_BOOKE)
+#define HAVE_TLBCAM	1
+#endif
+
+extern char etext[], _stext[];
+
+#ifdef CONFIG_SMP
+extern void hash_page_sync(void);
+#endif
+
+#ifdef HAVE_BATS
+extern unsigned long v_mapped_by_bats(unsigned long va);
+extern unsigned long p_mapped_by_bats(unsigned long pa);
+void setbat(int index, unsigned long virt, unsigned long phys,
+	    unsigned int size, int flags);
+
+#else /* !HAVE_BATS */
+#define v_mapped_by_bats(x)	(0UL)
+#define p_mapped_by_bats(x)	(0UL)
+#endif /* HAVE_BATS */
+
+#ifdef HAVE_TLBCAM
+extern unsigned int tlbcam_index;
+extern unsigned long v_mapped_by_tlbcam(unsigned long va);
+extern unsigned long p_mapped_by_tlbcam(unsigned long pa);
+#else /* !HAVE_TLBCAM */
+#define v_mapped_by_tlbcam(x)	(0UL)
+#define p_mapped_by_tlbcam(x)	(0UL)
+#endif /* HAVE_TLBCAM */
+
+#ifdef CONFIG_PTE_64BIT
+/* 44x uses an 8kB pgdir because it has 8-byte Linux PTEs. */
+#define PGDIR_ORDER	1
+#else
+#define PGDIR_ORDER	0
+#endif
+
+pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	pgd_t *ret;
+
+	ret = (pgd_t *)__get_free_pages(GFP_KERNEL|__GFP_ZERO, PGDIR_ORDER);
+	return ret;
+}
+
+void pgd_free(pgd_t *pgd)
+{
+	free_pages((unsigned long)pgd, PGDIR_ORDER);
+}
+
+pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
+{
+	pte_t *pte;
+	extern int mem_init_done;
+	extern void *early_get_page(void);
+
+	if (mem_init_done) {
+		pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+	} else {
+		pte = (pte_t *)early_get_page();
+		if (pte)
+			clear_page(pte);
+	}
+	return pte;
+}
+
+struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+	struct page *ptepage;
+
+#ifdef CONFIG_HIGHPTE
+	gfp_t flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_REPEAT;
+#else
+	gfp_t flags = GFP_KERNEL | __GFP_REPEAT;
+#endif
+
+	ptepage = alloc_pages(flags, 0);
+	if (ptepage)
+		clear_highpage(ptepage);
+	return ptepage;
+}
+
+void pte_free_kernel(pte_t *pte)
+{
+#ifdef CONFIG_SMP
+	hash_page_sync();
+#endif
+	free_page((unsigned long)pte);
+}
+
+void pte_free(struct page *ptepage)
+{
+#ifdef CONFIG_SMP
+	hash_page_sync();
+#endif
+	__free_page(ptepage);
+}
+
+#ifndef CONFIG_PHYS_64BIT
+void __iomem *
+ioremap(phys_addr_t addr, unsigned long size)
+{
+	return __ioremap(addr, size, _PAGE_NO_CACHE);
+}
+#else /* CONFIG_PHYS_64BIT */
+void __iomem *
+ioremap64(unsigned long long addr, unsigned long size)
+{
+	return __ioremap(addr, size, _PAGE_NO_CACHE);
+}
+
+void __iomem *
+ioremap(phys_addr_t addr, unsigned long size)
+{
+	phys_addr_t addr64 = fixup_bigphys_addr(addr, size);
+
+	return ioremap64(addr64, size);
+}
+#endif /* CONFIG_PHYS_64BIT */
+
+void __iomem *
+__ioremap(phys_addr_t addr, unsigned long size, unsigned long flags)
+{
+	unsigned long v, i;
+	phys_addr_t p;
+	int err;
+
+	/*
+	 * Choose an address to map it to.
+	 * Once the vmalloc system is running, we use it.
+	 * Before then, we use space going down from ioremap_base
+	 * (ioremap_bot records where we're up to).
+	 */
+	p = addr & PAGE_MASK;
+	size = PAGE_ALIGN(addr + size) - p;
+
+	/*
+	 * If the address lies within the first 16 MB, assume it's in ISA
+	 * memory space
+	 */
+	if (p < 16*1024*1024)
+		p += _ISA_MEM_BASE;
+
+	/*
+	 * Don't allow anybody to remap normal RAM that we're using.
+	 * mem_init() sets high_memory so only do the check after that.
+	 */
+	if (mem_init_done && (p < virt_to_phys(high_memory))) {
+		printk("__ioremap(): phys addr "PHYS_FMT" is RAM lr %p\n", p,
+		       __builtin_return_address(0));
+		return NULL;
+	}
+
+	if (size == 0)
+		return NULL;
+
+	/*
+	 * Is it already mapped?  Perhaps overlapped by a previous
+	 * BAT mapping.  If the whole area is mapped then we're done,
+	 * otherwise remap it since we want to keep the virt addrs for
+	 * each request contiguous.
+	 *
+	 * We make the assumption here that if the bottom and top
+	 * of the range we want are mapped then it's mapped to the
+	 * same virt address (and this is contiguous).
+	 *  -- Cort
+	 */
+	if ((v = p_mapped_by_bats(p)) /*&& p_mapped_by_bats(p+size-1)*/ )
+		goto out;
+
+	if ((v = p_mapped_by_tlbcam(p)))
+		goto out;
+
+	if (mem_init_done) {
+		struct vm_struct *area;
+		area = get_vm_area(size, VM_IOREMAP);
+		if (area == 0)
+			return NULL;
+		v = (unsigned long) area->addr;
+	} else {
+		v = (ioremap_bot -= size);
+	}
+
+	if ((flags & _PAGE_PRESENT) == 0)
+		flags |= _PAGE_KERNEL;
+	if (flags & _PAGE_NO_CACHE)
+		flags |= _PAGE_GUARDED;
+
+	/*
+	 * Should check if it is a candidate for a BAT mapping
+	 */
+
+	err = 0;
+	for (i = 0; i < size && err == 0; i += PAGE_SIZE)
+		err = map_page(v+i, p+i, flags);
+	if (err) {
+		if (mem_init_done)
+			vunmap((void *)v);
+		return NULL;
+	}
+
+out:
+	return (void __iomem *) (v + ((unsigned long)addr & ~PAGE_MASK));
+}
+
+void iounmap(volatile void __iomem *addr)
+{
+	/*
+	 * If mapped by BATs then there is nothing to do.
+	 * Calling vfree() generates a benign warning.
+	 */
+	if (v_mapped_by_bats((unsigned long)addr)) return;
+
+	if (addr > high_memory && (unsigned long) addr < ioremap_bot)
+		vunmap((void *) (PAGE_MASK & (unsigned long)addr));
+}
+
+void __iomem *ioport_map(unsigned long port, unsigned int len)
+{
+	return (void __iomem *) (port + _IO_BASE);
+}
+
+void ioport_unmap(void __iomem *addr)
+{
+	/* Nothing to do */
+}
+EXPORT_SYMBOL(ioport_map);
+EXPORT_SYMBOL(ioport_unmap);
+
+int
+map_page(unsigned long va, phys_addr_t pa, int flags)
+{
+	pmd_t *pd;
+	pte_t *pg;
+	int err = -ENOMEM;
+
+	/* Use upper 10 bits of VA to index the first level map */
+	pd = pmd_offset(pgd_offset_k(va), va);
+	/* Use middle 10 bits of VA to index the second-level map */
+	pg = pte_alloc_kernel(pd, va);
+	if (pg != 0) {
+		err = 0;
+		set_pte_at(&init_mm, va, pg, pfn_pte(pa >> PAGE_SHIFT, __pgprot(flags)));
+		if (mem_init_done)
+			flush_HPTE(0, va, pmd_val(*pd));
+	}
+	return err;
+}
+
+/*
+ * Map in all of physical memory starting at KERNELBASE.
+ */
+void __init mapin_ram(void)
+{
+	unsigned long v, p, s, f;
+
+	s = mmu_mapin_ram();
+	v = KERNELBASE + s;
+	p = PPC_MEMSTART + s;
+	for (; s < total_lowmem; s += PAGE_SIZE) {
+		if ((char *) v >= _stext && (char *) v < etext)
+			f = _PAGE_RAM_TEXT;
+		else
+			f = _PAGE_RAM;
+		map_page(v, p, f);
+		v += PAGE_SIZE;
+		p += PAGE_SIZE;
+	}
+}
+
+/* is x a power of 2? */
+#define is_power_of_2(x)	((x) != 0 && (((x) & ((x) - 1)) == 0))
+
+/* is x a power of 4? */
+#define is_power_of_4(x)	((x) != 0 && (((x) & (x-1)) == 0) && (ffs(x) & 1))
+
+/*
+ * Set up a mapping for a block of I/O.
+ * virt, phys, size must all be page-aligned.
+ * This should only be called before ioremap is called.
+ */
+void __init io_block_mapping(unsigned long virt, phys_addr_t phys,
+			     unsigned int size, int flags)
+{
+	int i;
+
+	if (virt > KERNELBASE && virt < ioremap_bot)
+		ioremap_bot = ioremap_base = virt;
+
+#ifdef HAVE_BATS
+	/*
+	 * Use a BAT for this if possible...
+	 */
+	if (io_bat_index < 2 && is_power_of_2(size)
+	    && (virt & (size - 1)) == 0 && (phys & (size - 1)) == 0) {
+		setbat(io_bat_index, virt, phys, size, flags);
+		++io_bat_index;
+		return;
+	}
+#endif /* HAVE_BATS */
+
+#ifdef HAVE_TLBCAM
+	/*
+	 * Use a CAM for this if possible...
+	 */
+	if (tlbcam_index < num_tlbcam_entries && is_power_of_4(size)
+	    && (virt & (size - 1)) == 0 && (phys & (size - 1)) == 0) {
+		settlbcam(tlbcam_index, virt, phys, size, flags, 0);
+		++tlbcam_index;
+		return;
+	}
+#endif /* HAVE_TLBCAM */
+
+	/* No BATs available, put it in the page tables. */
+	for (i = 0; i < size; i += PAGE_SIZE)
+		map_page(virt + i, phys + i, flags);
+}
+
+/* Scan the real Linux page tables and return a PTE pointer for
+ * a virtual address in a context.
+ * Returns true (1) if PTE was found, zero otherwise.  The pointer to
+ * the PTE pointer is unmodified if PTE is not found.
+ */
+int
+get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep)
+{
+        pgd_t	*pgd;
+        pmd_t	*pmd;
+        pte_t	*pte;
+        int     retval = 0;
+
+        pgd = pgd_offset(mm, addr & PAGE_MASK);
+        if (pgd) {
+                pmd = pmd_offset(pgd, addr & PAGE_MASK);
+                if (pmd_present(*pmd)) {
+                        pte = pte_offset_map(pmd, addr & PAGE_MASK);
+                        if (pte) {
+				retval = 1;
+				*ptep = pte;
+				/* XXX caller needs to do pte_unmap, yuck */
+                        }
+                }
+        }
+        return(retval);
+}
+
+/* Find physical address for this virtual address.  Normally used by
+ * I/O functions, but anyone can call it.
+ */
+unsigned long iopa(unsigned long addr)
+{
+	unsigned long pa;
+
+	/* I don't know why this won't work on PMacs or CHRP.  It
+	 * appears there is some bug, or there is some implicit
+	 * mapping done not properly represented by BATs or in page
+	 * tables.......I am actively working on resolving this, but
+	 * can't hold up other stuff.  -- Dan
+	 */
+	pte_t *pte;
+	struct mm_struct *mm;
+
+	/* Check the BATs */
+	pa = v_mapped_by_bats(addr);
+	if (pa)
+		return pa;
+
+	/* Allow mapping of user addresses (within the thread)
+	 * for DMA if necessary.
+	 */
+	if (addr < TASK_SIZE)
+		mm = current->mm;
+	else
+		mm = &init_mm;
+
+	pa = 0;
+	if (get_pteptr(mm, addr, &pte)) {
+		pa = (pte_val(*pte) & PAGE_MASK) | (addr & ~PAGE_MASK);
+		pte_unmap(pte);
+	}
+
+	return(pa);
+}
+
+/* This is will find the virtual address for a physical one....
+ * Swiped from APUS, could be dangerous :-).
+ * This is only a placeholder until I really find a way to make this
+ * work.  -- Dan
+ */
+unsigned long
+mm_ptov (unsigned long paddr)
+{
+	unsigned long ret;
+#if 0
+	if (paddr < 16*1024*1024)
+		ret = ZTWO_VADDR(paddr);
+	else {
+		int i;
+
+		for (i = 0; i < kmap_chunk_count;){
+			unsigned long phys = kmap_chunks[i++];
+			unsigned long size = kmap_chunks[i++];
+			unsigned long virt = kmap_chunks[i++];
+			if (paddr >= phys
+			    && paddr < (phys + size)){
+				ret = virt + paddr - phys;
+				goto exit;
+			}
+		}
+	
+		ret = (unsigned long) __va(paddr);
+	}
+exit:
+#ifdef DEBUGPV
+	printk ("PTOV(%lx)=%lx\n", paddr, ret);
+#endif
+#else
+	ret = (unsigned long)paddr + KERNELBASE;
+#endif
+	return ret;
+}
+
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
new file mode 100644
index 000000000000..2ffca63602c5
--- /dev/null
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -0,0 +1,336 @@
+/*
+ *  This file contains ioremap and related functions for 64-bit machines.
+ *
+ *  Derived from arch/ppc64/mm/init.c
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Modifications by Paul Mackerras (PowerMac) (paulus@samba.org)
+ *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ *    Copyright (C) 1996 Paul Mackerras
+ *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ *  Derived from "arch/i386/mm/init.c"
+ *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
+ *
+ *  Dave Engebretsen <engebret@us.ibm.com>
+ *      Rework for PPC64 port.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/stddef.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/bootmem.h>
+#include <linux/highmem.h>
+#include <linux/idr.h>
+#include <linux/nodemask.h>
+#include <linux/module.h>
+
+#include <asm/pgalloc.h>
+#include <asm/page.h>
+#include <asm/prom.h>
+#include <asm/lmb.h>
+#include <asm/rtas.h>
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <asm/pgtable.h>
+#include <asm/mmu.h>
+#include <asm/uaccess.h>
+#include <asm/smp.h>
+#include <asm/machdep.h>
+#include <asm/tlb.h>
+#include <asm/eeh.h>
+#include <asm/processor.h>
+#include <asm/mmzone.h>
+#include <asm/cputable.h>
+#include <asm/sections.h>
+#include <asm/system.h>
+#include <asm/iommu.h>
+#include <asm/abs_addr.h>
+#include <asm/vdso.h>
+
+#include "mmu_decl.h"
+
+unsigned long ioremap_bot = IMALLOC_BASE;
+static unsigned long phbs_io_bot = PHBS_IO_BASE;
+
+#ifdef CONFIG_PPC_ISERIES
+
+void __iomem *ioremap(unsigned long addr, unsigned long size)
+{
+	return (void __iomem *)addr;
+}
+
+extern void __iomem *__ioremap(unsigned long addr, unsigned long size,
+		       unsigned long flags)
+{
+	return (void __iomem *)addr;
+}
+
+void iounmap(volatile void __iomem *addr)
+{
+	return;
+}
+
+#else
+
+/*
+ * map_io_page currently only called by __ioremap
+ * map_io_page adds an entry to the ioremap page table
+ * and adds an entry to the HPT, possibly bolting it
+ */
+static int map_io_page(unsigned long ea, unsigned long pa, int flags)
+{
+	pgd_t *pgdp;
+	pud_t *pudp;
+	pmd_t *pmdp;
+	pte_t *ptep;
+
+	if (mem_init_done) {
+		pgdp = pgd_offset_k(ea);
+		pudp = pud_alloc(&init_mm, pgdp, ea);
+		if (!pudp)
+			return -ENOMEM;
+		pmdp = pmd_alloc(&init_mm, pudp, ea);
+		if (!pmdp)
+			return -ENOMEM;
+		ptep = pte_alloc_kernel(pmdp, ea);
+		if (!ptep)
+			return -ENOMEM;
+		set_pte_at(&init_mm, ea, ptep, pfn_pte(pa >> PAGE_SHIFT,
+							  __pgprot(flags)));
+	} else {
+		/*
+		 * If the mm subsystem is not fully up, we cannot create a
+		 * linux page table entry for this mapping.  Simply bolt an
+		 * entry in the hardware page table.
+		 *
+		 */
+		if (htab_bolt_mapping(ea, ea + PAGE_SIZE, pa, flags,
+				      mmu_virtual_psize)) {
+			printk(KERN_ERR "Failed to do bolted mapping IO "
+			       "memory at %016lx !\n", pa);
+			return -ENOMEM;
+		}
+	}
+	return 0;
+}
+
+
+static void __iomem * __ioremap_com(unsigned long addr, unsigned long pa,
+			    unsigned long ea, unsigned long size,
+			    unsigned long flags)
+{
+	unsigned long i;
+
+	if ((flags & _PAGE_PRESENT) == 0)
+		flags |= pgprot_val(PAGE_KERNEL);
+
+	for (i = 0; i < size; i += PAGE_SIZE)
+		if (map_io_page(ea+i, pa+i, flags))
+			return NULL;
+
+	return (void __iomem *) (ea + (addr & ~PAGE_MASK));
+}
+
+
+void __iomem *
+ioremap(unsigned long addr, unsigned long size)
+{
+	return __ioremap(addr, size, _PAGE_NO_CACHE | _PAGE_GUARDED);
+}
+
+void __iomem * __ioremap(unsigned long addr, unsigned long size,
+			 unsigned long flags)
+{
+	unsigned long pa, ea;
+	void __iomem *ret;
+
+	/*
+	 * Choose an address to map it to.
+	 * Once the imalloc system is running, we use it.
+	 * Before that, we map using addresses going
+	 * up from ioremap_bot.  imalloc will use
+	 * the addresses from ioremap_bot through
+	 * IMALLOC_END
+	 * 
+	 */
+	pa = addr & PAGE_MASK;
+	size = PAGE_ALIGN(addr + size) - pa;
+
+	if (size == 0)
+		return NULL;
+
+	if (mem_init_done) {
+		struct vm_struct *area;
+		area = im_get_free_area(size);
+		if (area == NULL)
+			return NULL;
+		ea = (unsigned long)(area->addr);
+		ret = __ioremap_com(addr, pa, ea, size, flags);
+		if (!ret)
+			im_free(area->addr);
+	} else {
+		ea = ioremap_bot;
+		ret = __ioremap_com(addr, pa, ea, size, flags);
+		if (ret)
+			ioremap_bot += size;
+	}
+	return ret;
+}
+
+#define IS_PAGE_ALIGNED(_val) ((_val) == ((_val) & PAGE_MASK))
+
+int __ioremap_explicit(unsigned long pa, unsigned long ea,
+		       unsigned long size, unsigned long flags)
+{
+	struct vm_struct *area;
+	void __iomem *ret;
+	
+	/* For now, require page-aligned values for pa, ea, and size */
+	if (!IS_PAGE_ALIGNED(pa) || !IS_PAGE_ALIGNED(ea) ||
+	    !IS_PAGE_ALIGNED(size)) {
+		printk(KERN_ERR	"unaligned value in %s\n", __FUNCTION__);
+		return 1;
+	}
+	
+	if (!mem_init_done) {
+		/* Two things to consider in this case:
+		 * 1) No records will be kept (imalloc, etc) that the region
+		 *    has been remapped
+		 * 2) It won't be easy to iounmap() the region later (because
+		 *    of 1)
+		 */
+		;
+	} else {
+		area = im_get_area(ea, size,
+			IM_REGION_UNUSED|IM_REGION_SUBSET|IM_REGION_EXISTS);
+		if (area == NULL) {
+			/* Expected when PHB-dlpar is in play */
+			return 1;
+		}
+		if (ea != (unsigned long) area->addr) {
+			printk(KERN_ERR "unexpected addr return from "
+			       "im_get_area\n");
+			return 1;
+		}
+	}
+	
+	ret = __ioremap_com(pa, pa, ea, size, flags);
+	if (ret == NULL) {
+		printk(KERN_ERR "ioremap_explicit() allocation failure !\n");
+		return 1;
+	}
+	if (ret != (void *) ea) {
+		printk(KERN_ERR "__ioremap_com() returned unexpected addr\n");
+		return 1;
+	}
+
+	return 0;
+}
+
+/*  
+ * Unmap an IO region and remove it from imalloc'd list.
+ * Access to IO memory should be serialized by driver.
+ * This code is modeled after vmalloc code - unmap_vm_area()
+ *
+ * XXX	what about calls before mem_init_done (ie python_countermeasures())
+ */
+void iounmap(volatile void __iomem *token)
+{
+	void *addr;
+
+	if (!mem_init_done)
+		return;
+	
+	addr = (void *) ((unsigned long __force) token & PAGE_MASK);
+
+	im_free(addr);
+}
+
+static int iounmap_subset_regions(unsigned long addr, unsigned long size)
+{
+	struct vm_struct *area;
+
+	/* Check whether subsets of this region exist */
+	area = im_get_area(addr, size, IM_REGION_SUPERSET);
+	if (area == NULL)
+		return 1;
+
+	while (area) {
+		iounmap((void __iomem *) area->addr);
+		area = im_get_area(addr, size,
+				IM_REGION_SUPERSET);
+	}
+
+	return 0;
+}
+
+int iounmap_explicit(volatile void __iomem *start, unsigned long size)
+{
+	struct vm_struct *area;
+	unsigned long addr;
+	int rc;
+	
+	addr = (unsigned long __force) start & PAGE_MASK;
+
+	/* Verify that the region either exists or is a subset of an existing
+	 * region.  In the latter case, split the parent region to create 
+	 * the exact region 
+	 */
+	area = im_get_area(addr, size, 
+			    IM_REGION_EXISTS | IM_REGION_SUBSET);
+	if (area == NULL) {
+		/* Determine whether subset regions exist.  If so, unmap */
+		rc = iounmap_subset_regions(addr, size);
+		if (rc) {
+			printk(KERN_ERR
+			       "%s() cannot unmap nonexistent range 0x%lx\n",
+ 				__FUNCTION__, addr);
+			return 1;
+		}
+	} else {
+		iounmap((void __iomem *) area->addr);
+	}
+	/*
+	 * FIXME! This can't be right:
+	iounmap(area->addr);
+	 * Maybe it should be "iounmap(area);"
+	 */
+	return 0;
+}
+
+#endif
+
+EXPORT_SYMBOL(ioremap);
+EXPORT_SYMBOL(__ioremap);
+EXPORT_SYMBOL(iounmap);
+
+void __iomem * reserve_phb_iospace(unsigned long size)
+{
+	void __iomem *virt_addr;
+		
+	if (phbs_io_bot >= IMALLOC_BASE) 
+		panic("reserve_phb_iospace(): phb io space overflow\n");
+			
+	virt_addr = (void __iomem *) phbs_io_bot;
+	phbs_io_bot += size;
+
+	return virt_addr;
+}
diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c
new file mode 100644
index 000000000000..ed7fcfe5fd37
--- /dev/null
+++ b/arch/powerpc/mm/ppc_mmu_32.c
@@ -0,0 +1,300 @@
+/*
+ * This file contains the routines for handling the MMU on those
+ * PowerPC implementations where the MMU substantially follows the
+ * architecture specification.  This includes the 6xx, 7xx, 7xxx,
+ * 8260, and POWER3 implementations but excludes the 8xx and 4xx.
+ *  -- paulus
+ *
+ *  Derived from arch/ppc/mm/init.c:
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ *    Copyright (C) 1996 Paul Mackerras
+ *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ *  Derived from "arch/i386/mm/init.c"
+ *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/highmem.h>
+
+#include <asm/prom.h>
+#include <asm/mmu.h>
+#include <asm/machdep.h>
+#include <asm/lmb.h>
+
+#include "mmu_decl.h"
+
+PTE *Hash, *Hash_end;
+unsigned long Hash_size, Hash_mask;
+unsigned long _SDR1;
+
+union ubat {			/* BAT register values to be loaded */
+	BAT	bat;
+#ifdef CONFIG_PPC64BRIDGE
+	u64	word[2];
+#else
+	u32	word[2];
+#endif
+} BATS[4][2];			/* 4 pairs of IBAT, DBAT */
+
+struct batrange {		/* stores address ranges mapped by BATs */
+	unsigned long start;
+	unsigned long limit;
+	unsigned long phys;
+} bat_addrs[4];
+
+/*
+ * Return PA for this VA if it is mapped by a BAT, or 0
+ */
+unsigned long v_mapped_by_bats(unsigned long va)
+{
+	int b;
+	for (b = 0; b < 4; ++b)
+		if (va >= bat_addrs[b].start && va < bat_addrs[b].limit)
+			return bat_addrs[b].phys + (va - bat_addrs[b].start);
+	return 0;
+}
+
+/*
+ * Return VA for a given PA or 0 if not mapped
+ */
+unsigned long p_mapped_by_bats(unsigned long pa)
+{
+	int b;
+	for (b = 0; b < 4; ++b)
+		if (pa >= bat_addrs[b].phys
+	    	    && pa < (bat_addrs[b].limit-bat_addrs[b].start)
+		              +bat_addrs[b].phys)
+			return bat_addrs[b].start+(pa-bat_addrs[b].phys);
+	return 0;
+}
+
+unsigned long __init mmu_mapin_ram(void)
+{
+#ifdef CONFIG_POWER4
+	return 0;
+#else
+	unsigned long tot, bl, done;
+	unsigned long max_size = (256<<20);
+	unsigned long align;
+
+	if (__map_without_bats)
+		return 0;
+
+	/* Set up BAT2 and if necessary BAT3 to cover RAM. */
+
+	/* Make sure we don't map a block larger than the
+	   smallest alignment of the physical address. */
+	/* alignment of PPC_MEMSTART */
+	align = ~(PPC_MEMSTART-1) & PPC_MEMSTART;
+	/* set BAT block size to MIN(max_size, align) */
+	if (align && align < max_size)
+		max_size = align;
+
+	tot = total_lowmem;
+	for (bl = 128<<10; bl < max_size; bl <<= 1) {
+		if (bl * 2 > tot)
+			break;
+	}
+
+	setbat(2, KERNELBASE, PPC_MEMSTART, bl, _PAGE_RAM);
+	done = (unsigned long)bat_addrs[2].limit - KERNELBASE + 1;
+	if ((done < tot) && !bat_addrs[3].limit) {
+		/* use BAT3 to cover a bit more */
+		tot -= done;
+		for (bl = 128<<10; bl < max_size; bl <<= 1)
+			if (bl * 2 > tot)
+				break;
+		setbat(3, KERNELBASE+done, PPC_MEMSTART+done, bl, _PAGE_RAM);
+		done = (unsigned long)bat_addrs[3].limit - KERNELBASE + 1;
+	}
+
+	return done;
+#endif
+}
+
+/*
+ * Set up one of the I/D BAT (block address translation) register pairs.
+ * The parameters are not checked; in particular size must be a power
+ * of 2 between 128k and 256M.
+ */
+void __init setbat(int index, unsigned long virt, unsigned long phys,
+		   unsigned int size, int flags)
+{
+	unsigned int bl;
+	int wimgxpp;
+	union ubat *bat = BATS[index];
+
+	if (((flags & _PAGE_NO_CACHE) == 0) &&
+	    cpu_has_feature(CPU_FTR_NEED_COHERENT))
+		flags |= _PAGE_COHERENT;
+
+	bl = (size >> 17) - 1;
+	if (PVR_VER(mfspr(SPRN_PVR)) != 1) {
+		/* 603, 604, etc. */
+		/* Do DBAT first */
+		wimgxpp = flags & (_PAGE_WRITETHRU | _PAGE_NO_CACHE
+				   | _PAGE_COHERENT | _PAGE_GUARDED);
+		wimgxpp |= (flags & _PAGE_RW)? BPP_RW: BPP_RX;
+		bat[1].word[0] = virt | (bl << 2) | 2; /* Vs=1, Vp=0 */
+		bat[1].word[1] = phys | wimgxpp;
+#ifndef CONFIG_KGDB /* want user access for breakpoints */
+		if (flags & _PAGE_USER)
+#endif
+			bat[1].bat.batu.vp = 1;
+		if (flags & _PAGE_GUARDED) {
+			/* G bit must be zero in IBATs */
+			bat[0].word[0] = bat[0].word[1] = 0;
+		} else {
+			/* make IBAT same as DBAT */
+			bat[0] = bat[1];
+		}
+	} else {
+		/* 601 cpu */
+		if (bl > BL_8M)
+			bl = BL_8M;
+		wimgxpp = flags & (_PAGE_WRITETHRU | _PAGE_NO_CACHE
+				   | _PAGE_COHERENT);
+		wimgxpp |= (flags & _PAGE_RW)?
+			((flags & _PAGE_USER)? PP_RWRW: PP_RWXX): PP_RXRX;
+		bat->word[0] = virt | wimgxpp | 4;	/* Ks=0, Ku=1 */
+		bat->word[1] = phys | bl | 0x40;	/* V=1 */
+	}
+
+	bat_addrs[index].start = virt;
+	bat_addrs[index].limit = virt + ((bl + 1) << 17) - 1;
+	bat_addrs[index].phys = phys;
+}
+
+/*
+ * Preload a translation in the hash table
+ */
+void hash_preload(struct mm_struct *mm, unsigned long ea,
+		  unsigned long access, unsigned long trap)
+{
+	pmd_t *pmd;
+
+	if (Hash == 0)
+		return;
+	pmd = pmd_offset(pgd_offset(mm, ea), ea);
+	if (!pmd_none(*pmd))
+		add_hash_page(mm->context, ea, pmd_val(*pmd));
+}
+
+/*
+ * Initialize the hash table and patch the instructions in hashtable.S.
+ */
+void __init MMU_init_hw(void)
+{
+	unsigned int hmask, mb, mb2;
+	unsigned int n_hpteg, lg_n_hpteg;
+
+	extern unsigned int hash_page_patch_A[];
+	extern unsigned int hash_page_patch_B[], hash_page_patch_C[];
+	extern unsigned int hash_page[];
+	extern unsigned int flush_hash_patch_A[], flush_hash_patch_B[];
+
+	if (!cpu_has_feature(CPU_FTR_HPTE_TABLE)) {
+		/*
+		 * Put a blr (procedure return) instruction at the
+		 * start of hash_page, since we can still get DSI
+		 * exceptions on a 603.
+		 */
+		hash_page[0] = 0x4e800020;
+		flush_icache_range((unsigned long) &hash_page[0],
+				   (unsigned long) &hash_page[1]);
+		return;
+	}
+
+	if ( ppc_md.progress ) ppc_md.progress("hash:enter", 0x105);
+
+#ifdef CONFIG_PPC64BRIDGE
+#define LG_HPTEG_SIZE	7		/* 128 bytes per HPTEG */
+#define SDR1_LOW_BITS	(lg_n_hpteg - 11)
+#define MIN_N_HPTEG	2048		/* min 256kB hash table */
+#else
+#define LG_HPTEG_SIZE	6		/* 64 bytes per HPTEG */
+#define SDR1_LOW_BITS	((n_hpteg - 1) >> 10)
+#define MIN_N_HPTEG	1024		/* min 64kB hash table */
+#endif
+
+	/*
+	 * Allow 1 HPTE (1/8 HPTEG) for each page of memory.
+	 * This is less than the recommended amount, but then
+	 * Linux ain't AIX.
+	 */
+	n_hpteg = total_memory / (PAGE_SIZE * 8);
+	if (n_hpteg < MIN_N_HPTEG)
+		n_hpteg = MIN_N_HPTEG;
+	lg_n_hpteg = __ilog2(n_hpteg);
+	if (n_hpteg & (n_hpteg - 1)) {
+		++lg_n_hpteg;		/* round up if not power of 2 */
+		n_hpteg = 1 << lg_n_hpteg;
+	}
+	Hash_size = n_hpteg << LG_HPTEG_SIZE;
+
+	/*
+	 * Find some memory for the hash table.
+	 */
+	if ( ppc_md.progress ) ppc_md.progress("hash:find piece", 0x322);
+	Hash = __va(lmb_alloc_base(Hash_size, Hash_size,
+				   __initial_memory_limit));
+	cacheable_memzero(Hash, Hash_size);
+	_SDR1 = __pa(Hash) | SDR1_LOW_BITS;
+
+	Hash_end = (PTE *) ((unsigned long)Hash + Hash_size);
+
+	printk("Total memory = %ldMB; using %ldkB for hash table (at %p)\n",
+	       total_memory >> 20, Hash_size >> 10, Hash);
+
+
+	/*
+	 * Patch up the instructions in hashtable.S:create_hpte
+	 */
+	if ( ppc_md.progress ) ppc_md.progress("hash:patch", 0x345);
+	Hash_mask = n_hpteg - 1;
+	hmask = Hash_mask >> (16 - LG_HPTEG_SIZE);
+	mb2 = mb = 32 - LG_HPTEG_SIZE - lg_n_hpteg;
+	if (lg_n_hpteg > 16)
+		mb2 = 16 - LG_HPTEG_SIZE;
+
+	hash_page_patch_A[0] = (hash_page_patch_A[0] & ~0xffff)
+		| ((unsigned int)(Hash) >> 16);
+	hash_page_patch_A[1] = (hash_page_patch_A[1] & ~0x7c0) | (mb << 6);
+	hash_page_patch_A[2] = (hash_page_patch_A[2] & ~0x7c0) | (mb2 << 6);
+	hash_page_patch_B[0] = (hash_page_patch_B[0] & ~0xffff) | hmask;
+	hash_page_patch_C[0] = (hash_page_patch_C[0] & ~0xffff) | hmask;
+
+	/*
+	 * Ensure that the locations we've patched have been written
+	 * out from the data cache and invalidated in the instruction
+	 * cache, on those machines with split caches.
+	 */
+	flush_icache_range((unsigned long) &hash_page_patch_A[0],
+			   (unsigned long) &hash_page_patch_C[1]);
+
+	/*
+	 * Patch up the instructions in hashtable.S:flush_hash_page
+	 */
+	flush_hash_patch_A[0] = (flush_hash_patch_A[0] & ~0xffff)
+		| ((unsigned int)(Hash) >> 16);
+	flush_hash_patch_A[1] = (flush_hash_patch_A[1] & ~0x7c0) | (mb << 6);
+	flush_hash_patch_A[2] = (flush_hash_patch_A[2] & ~0x7c0) | (mb2 << 6);
+	flush_hash_patch_B[0] = (flush_hash_patch_B[0] & ~0xffff) | hmask;
+	flush_icache_range((unsigned long) &flush_hash_patch_A[0],
+			   (unsigned long) &flush_hash_patch_B[1]);
+
+	if ( ppc_md.progress ) ppc_md.progress("hash:done", 0x205);
+}
diff --git a/arch/ppc64/mm/slb.c b/arch/powerpc/mm/slb.c
index 0473953f6a37..60e852f2f8e5 100644
--- a/arch/ppc64/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -14,14 +14,32 @@
  *      2 of the License, or (at your option) any later version.
  */
 
+#undef DEBUG
+
 #include <linux/config.h>
 #include <asm/pgtable.h>
 #include <asm/mmu.h>
 #include <asm/mmu_context.h>
 #include <asm/paca.h>
 #include <asm/cputable.h>
+#include <asm/cacheflush.h>
+
+#ifdef DEBUG
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
 
-extern void slb_allocate(unsigned long ea);
+extern void slb_allocate_realmode(unsigned long ea);
+extern void slb_allocate_user(unsigned long ea);
+
+static void slb_allocate(unsigned long ea)
+{
+	/* Currently, we do real mode for all SLBs including user, but
+	 * that will change if we bring back dynamic VSIDs
+	 */
+	slb_allocate_realmode(ea);
+}
 
 static inline unsigned long mk_esid_data(unsigned long ea, unsigned long slot)
 {
@@ -46,13 +64,15 @@ static void slb_flush_and_rebolt(void)
 {
 	/* If you change this make sure you change SLB_NUM_BOLTED
 	 * appropriately too. */
-	unsigned long ksp_flags = SLB_VSID_KERNEL;
+	unsigned long linear_llp, virtual_llp, lflags, vflags;
 	unsigned long ksp_esid_data;
 
 	WARN_ON(!irqs_disabled());
 
-	if (cpu_has_feature(CPU_FTR_16M_PAGE))
-		ksp_flags |= SLB_VSID_L;
+	linear_llp = mmu_psize_defs[mmu_linear_psize].sllp;
+	virtual_llp = mmu_psize_defs[mmu_virtual_psize].sllp;
+	lflags = SLB_VSID_KERNEL | linear_llp;
+	vflags = SLB_VSID_KERNEL | virtual_llp;
 
 	ksp_esid_data = mk_esid_data(get_paca()->kstack, 2);
 	if ((ksp_esid_data & ESID_MASK) == KERNELBASE)
@@ -67,9 +87,9 @@ static void slb_flush_and_rebolt(void)
 		     /* Slot 2 - kernel stack */
 		     "slbmte	%2,%3\n"
 		     "isync"
-		     :: "r"(mk_vsid_data(VMALLOCBASE, SLB_VSID_KERNEL)),
+		     :: "r"(mk_vsid_data(VMALLOCBASE, vflags)),
 		        "r"(mk_esid_data(VMALLOCBASE, 1)),
-		        "r"(mk_vsid_data(ksp_esid_data, ksp_flags)),
+		        "r"(mk_vsid_data(ksp_esid_data, lflags)),
 		        "r"(ksp_esid_data)
 		     : "memory");
 }
@@ -102,6 +122,9 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
 
 	get_paca()->slb_cache_ptr = 0;
 	get_paca()->context = mm->context;
+#ifdef CONFIG_PPC_64K_PAGES
+	get_paca()->pgdir = mm->pgd;
+#endif /* CONFIG_PPC_64K_PAGES */
 
 	/*
 	 * preload some userspace segments into the SLB.
@@ -131,28 +154,77 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
 	slb_allocate(unmapped_base);
 }
 
+static inline void patch_slb_encoding(unsigned int *insn_addr,
+				      unsigned int immed)
+{
+	/* Assume the instruction had a "0" immediate value, just
+	 * "or" in the new value
+	 */
+	*insn_addr |= immed;
+	flush_icache_range((unsigned long)insn_addr, 4+
+			   (unsigned long)insn_addr);
+}
+
 void slb_initialize(void)
 {
+	unsigned long linear_llp, virtual_llp;
+	static int slb_encoding_inited;
+	extern unsigned int *slb_miss_kernel_load_linear;
+	extern unsigned int *slb_miss_kernel_load_virtual;
+	extern unsigned int *slb_miss_user_load_normal;
+#ifdef CONFIG_HUGETLB_PAGE
+	extern unsigned int *slb_miss_user_load_huge;
+	unsigned long huge_llp;
+
+	huge_llp = mmu_psize_defs[mmu_huge_psize].sllp;
+#endif
+
+	/* Prepare our SLB miss handler based on our page size */
+	linear_llp = mmu_psize_defs[mmu_linear_psize].sllp;
+	virtual_llp = mmu_psize_defs[mmu_virtual_psize].sllp;
+	if (!slb_encoding_inited) {
+		slb_encoding_inited = 1;
+		patch_slb_encoding(slb_miss_kernel_load_linear,
+				   SLB_VSID_KERNEL | linear_llp);
+		patch_slb_encoding(slb_miss_kernel_load_virtual,
+				   SLB_VSID_KERNEL | virtual_llp);
+		patch_slb_encoding(slb_miss_user_load_normal,
+				   SLB_VSID_USER | virtual_llp);
+
+		DBG("SLB: linear  LLP = %04x\n", linear_llp);
+		DBG("SLB: virtual LLP = %04x\n", virtual_llp);
+#ifdef CONFIG_HUGETLB_PAGE
+		patch_slb_encoding(slb_miss_user_load_huge,
+				   SLB_VSID_USER | huge_llp);
+		DBG("SLB: huge    LLP = %04x\n", huge_llp);
+#endif
+	}
+
 	/* On iSeries the bolted entries have already been set up by
 	 * the hypervisor from the lparMap data in head.S */
 #ifndef CONFIG_PPC_ISERIES
-	unsigned long flags = SLB_VSID_KERNEL;
+ {
+	unsigned long lflags, vflags;
 
- 	/* Invalidate the entire SLB (even slot 0) & all the ERATS */
- 	if (cpu_has_feature(CPU_FTR_16M_PAGE))
- 		flags |= SLB_VSID_L;
+	lflags = SLB_VSID_KERNEL | linear_llp;
+	vflags = SLB_VSID_KERNEL | virtual_llp;
 
- 	asm volatile("isync":::"memory");
- 	asm volatile("slbmte  %0,%0"::"r" (0) : "memory");
+	/* Invalidate the entire SLB (even slot 0) & all the ERATS */
+	asm volatile("isync":::"memory");
+	asm volatile("slbmte  %0,%0"::"r" (0) : "memory");
 	asm volatile("isync; slbia; isync":::"memory");
-	create_slbe(KERNELBASE, flags, 0);
-	create_slbe(VMALLOCBASE, SLB_VSID_KERNEL, 1);
+	create_slbe(KERNELBASE, lflags, 0);
+
+	/* VMALLOC space has 4K pages always for now */
+	create_slbe(VMALLOCBASE, vflags, 1);
+
 	/* We don't bolt the stack for the time being - we're in boot,
 	 * so the stack is in the bolted segment.  By the time it goes
 	 * elsewhere, we'll call _switch() which will bolt in the new
 	 * one. */
 	asm volatile("isync":::"memory");
-#endif
+ }
+#endif /* CONFIG_PPC_ISERIES */
 
 	get_paca()->stab_rr = SLB_NUM_BOLTED;
 }
diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S
new file mode 100644
index 000000000000..950ffc5848c7
--- /dev/null
+++ b/arch/powerpc/mm/slb_low.S
@@ -0,0 +1,240 @@
+/*
+ * arch/ppc64/mm/slb_low.S
+ *
+ * Low-level SLB routines
+ *
+ * Copyright (C) 2004 David Gibson <dwg@au.ibm.com>, IBM
+ *
+ * Based on earlier C version:
+ * Dave Engebretsen and Mike Corrigan {engebret|mikejc}@us.ibm.com
+ *    Copyright (c) 2001 Dave Engebretsen
+ * Copyright (C) 2002 Anton Blanchard <anton@au.ibm.com>, IBM
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/cputable.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/pgtable.h>
+
+/* void slb_allocate_realmode(unsigned long ea);
+ *
+ * Create an SLB entry for the given EA (user or kernel).
+ * 	r3 = faulting address, r13 = PACA
+ *	r9, r10, r11 are clobbered by this function
+ * No other registers are examined or changed.
+ */
+_GLOBAL(slb_allocate_realmode)
+	/* r3 = faulting address */
+
+	srdi	r9,r3,60		/* get region */
+	srdi	r10,r3,28		/* get esid */
+	cmpldi	cr7,r9,0xc		/* cmp KERNELBASE for later use */
+
+	/* r3 = address, r10 = esid, cr7 = <>KERNELBASE */
+	blt	cr7,0f			/* user or kernel? */
+
+	/* kernel address: proto-VSID = ESID */
+	/* WARNING - MAGIC: we don't use the VSID 0xfffffffff, but
+	 * this code will generate the protoVSID 0xfffffffff for the
+	 * top segment.  That's ok, the scramble below will translate
+	 * it to VSID 0, which is reserved as a bad VSID - one which
+	 * will never have any pages in it.  */
+
+	/* Check if hitting the linear mapping of the vmalloc/ioremap
+	 * kernel space
+	*/
+	bne	cr7,1f
+
+	/* Linear mapping encoding bits, the "li" instruction below will
+	 * be patched by the kernel at boot
+	 */
+_GLOBAL(slb_miss_kernel_load_linear)
+	li	r11,0
+	b	slb_finish_load
+
+1:	/* vmalloc/ioremap mapping encoding bits, the "li" instruction below
+	 * will be patched by the kernel at boot
+	 */
+_GLOBAL(slb_miss_kernel_load_virtual)
+	li	r11,0
+	b	slb_finish_load
+
+
+0:	/* user address: proto-VSID = context << 15 | ESID. First check
+	 * if the address is within the boundaries of the user region
+	 */
+	srdi.	r9,r10,USER_ESID_BITS
+	bne-	8f			/* invalid ea bits set */
+
+	/* Figure out if the segment contains huge pages */
+#ifdef CONFIG_HUGETLB_PAGE
+BEGIN_FTR_SECTION
+	b	1f
+END_FTR_SECTION_IFCLR(CPU_FTR_16M_PAGE)
+	cmpldi	r10,16
+
+	lhz	r9,PACALOWHTLBAREAS(r13)
+	mr	r11,r10
+	blt	5f
+
+	lhz	r9,PACAHIGHHTLBAREAS(r13)
+	srdi	r11,r10,(HTLB_AREA_SHIFT-SID_SHIFT)
+
+5:	srd	r9,r9,r11
+	andi.	r9,r9,1
+	beq	1f
+_GLOBAL(slb_miss_user_load_huge)
+	li	r11,0
+	b	2f
+1:
+#endif /* CONFIG_HUGETLB_PAGE */
+
+_GLOBAL(slb_miss_user_load_normal)
+	li	r11,0
+
+2:
+	ld	r9,PACACONTEXTID(r13)
+	rldimi	r10,r9,USER_ESID_BITS,0
+	b	slb_finish_load
+
+8:	/* invalid EA */
+	li	r10,0			/* BAD_VSID */
+	li	r11,SLB_VSID_USER	/* flags don't much matter */
+	b	slb_finish_load
+
+#ifdef __DISABLED__
+
+/* void slb_allocate_user(unsigned long ea);
+ *
+ * Create an SLB entry for the given EA (user or kernel).
+ * 	r3 = faulting address, r13 = PACA
+ *	r9, r10, r11 are clobbered by this function
+ * No other registers are examined or changed.
+ *
+ * It is called with translation enabled in order to be able to walk the
+ * page tables. This is not currently used.
+ */
+_GLOBAL(slb_allocate_user)
+	/* r3 = faulting address */
+	srdi	r10,r3,28		/* get esid */
+
+	crset	4*cr7+lt		/* set "user" flag for later */
+
+	/* check if we fit in the range covered by the pagetables*/
+	srdi.	r9,r3,PGTABLE_EADDR_SIZE
+	crnot	4*cr0+eq,4*cr0+eq
+	beqlr
+
+	/* now we need to get to the page tables in order to get the page
+	 * size encoding from the PMD. In the future, we'll be able to deal
+	 * with 1T segments too by getting the encoding from the PGD instead
+	 */
+	ld	r9,PACAPGDIR(r13)
+	cmpldi	cr0,r9,0
+	beqlr
+	rlwinm	r11,r10,8,25,28
+	ldx	r9,r9,r11		/* get pgd_t */
+	cmpldi	cr0,r9,0
+	beqlr
+	rlwinm	r11,r10,3,17,28
+	ldx	r9,r9,r11		/* get pmd_t */
+	cmpldi	cr0,r9,0
+	beqlr
+
+	/* build vsid flags */
+	andi.	r11,r9,SLB_VSID_LLP
+	ori	r11,r11,SLB_VSID_USER
+
+	/* get context to calculate proto-VSID */
+	ld	r9,PACACONTEXTID(r13)
+	rldimi	r10,r9,USER_ESID_BITS,0
+
+	/* fall through slb_finish_load */
+
+#endif /* __DISABLED__ */
+
+
+/*
+ * Finish loading of an SLB entry and return
+ *
+ * r3 = EA, r10 = proto-VSID, r11 = flags, clobbers r9, cr7 = <>KERNELBASE
+ */
+slb_finish_load:
+	ASM_VSID_SCRAMBLE(r10,r9)
+	rldimi	r11,r10,SLB_VSID_SHIFT,16	/* combine VSID and flags */
+
+	/* r3 = EA, r11 = VSID data */
+	/*
+	 * Find a slot, round robin. Previously we tried to find a
+	 * free slot first but that took too long. Unfortunately we
+ 	 * dont have any LRU information to help us choose a slot.
+ 	 */
+#ifdef CONFIG_PPC_ISERIES
+	/*
+	 * On iSeries, the "bolted" stack segment can be cast out on
+	 * shared processor switch so we need to check for a miss on
+	 * it and restore it to the right slot.
+	 */
+	ld	r9,PACAKSAVE(r13)
+	clrrdi	r9,r9,28
+	clrrdi	r3,r3,28
+	li	r10,SLB_NUM_BOLTED-1	/* Stack goes in last bolted slot */
+	cmpld	r9,r3
+	beq	3f
+#endif /* CONFIG_PPC_ISERIES */
+
+	ld	r10,PACASTABRR(r13)
+	addi	r10,r10,1
+	/* use a cpu feature mask if we ever change our slb size */
+	cmpldi	r10,SLB_NUM_ENTRIES
+
+	blt+	4f
+	li	r10,SLB_NUM_BOLTED
+
+4:
+	std	r10,PACASTABRR(r13)
+
+3:
+	rldimi	r3,r10,0,36		/* r3= EA[0:35] | entry */
+	oris	r10,r3,SLB_ESID_V@h	/* r3 |= SLB_ESID_V */
+
+	/* r3 = ESID data, r11 = VSID data */
+
+	/*
+	 * No need for an isync before or after this slbmte. The exception
+	 * we enter with and the rfid we exit with are context synchronizing.
+	 */
+	slbmte	r11,r10
+
+	/* we're done for kernel addresses */
+	crclr	4*cr0+eq		/* set result to "success" */
+	bgelr	cr7
+
+	/* Update the slb cache */
+	lhz	r3,PACASLBCACHEPTR(r13)	/* offset = paca->slb_cache_ptr */
+	cmpldi	r3,SLB_CACHE_ENTRIES
+	bge	1f
+
+	/* still room in the slb cache */
+	sldi	r11,r3,1		/* r11 = offset * sizeof(u16) */
+	rldicl	r10,r10,36,28		/* get low 16 bits of the ESID */
+	add	r11,r11,r13		/* r11 = (u16 *)paca + offset */
+	sth	r10,PACASLBCACHE(r11)	/* paca->slb_cache[offset] = esid */
+	addi	r3,r3,1			/* offset++ */
+	b	2f
+1:					/* offset >= SLB_CACHE_ENTRIES */
+	li	r3,SLB_CACHE_ENTRIES+1
+2:
+	sth	r3,PACASLBCACHEPTR(r13)	/* paca->slb_cache_ptr = offset */
+	crclr	4*cr0+eq		/* set result to "success" */
+	blr
+
diff --git a/arch/ppc64/mm/stab.c b/arch/powerpc/mm/stab.c
index 1b83f002bf27..cfbb4e1f966b 100644
--- a/arch/ppc64/mm/stab.c
+++ b/arch/powerpc/mm/stab.c
@@ -20,13 +20,13 @@
 #include <asm/cputable.h>
 #include <asm/lmb.h>
 #include <asm/abs_addr.h>
+#include <asm/firmware.h>
 
 struct stab_entry {
 	unsigned long esid_data;
 	unsigned long vsid_data;
 };
 
-/* Both the segment table and SLB code uses the following cache */
 #define NR_STAB_CACHE_ENTRIES 8
 DEFINE_PER_CPU(long, stab_cache_ptr);
 DEFINE_PER_CPU(long, stab_cache[NR_STAB_CACHE_ENTRIES]);
@@ -186,7 +186,7 @@ void switch_stab(struct task_struct *tsk, struct mm_struct *mm)
 		/* Never flush the first entry. */
 		ste += 1;
 		for (entry = 1;
-		     entry < (PAGE_SIZE / sizeof(struct stab_entry));
+		     entry < (HW_PAGE_SIZE / sizeof(struct stab_entry));
 		     entry++, ste++) {
 			unsigned long ea;
 			ea = ste->esid_data & ESID_MASK;
@@ -200,6 +200,10 @@ void switch_stab(struct task_struct *tsk, struct mm_struct *mm)
 
 	__get_cpu_var(stab_cache_ptr) = 0;
 
+#ifdef CONFIG_PPC_64K_PAGES
+	get_paca()->pgdir = mm->pgd;
+#endif /* CONFIG_PPC_64K_PAGES */
+
 	/* Now preload some entries for the new task */
 	if (test_tsk_thread_flag(tsk, TIF_32BIT))
 		unmapped_base = TASK_UNMAPPED_BASE_USER32;
@@ -223,8 +227,6 @@ void switch_stab(struct task_struct *tsk, struct mm_struct *mm)
 	asm volatile("sync" : : : "memory");
 }
 
-extern void slb_initialize(void);
-
 /*
  * Allocate segment tables for secondary CPUs.  These must all go in
  * the first (bolted) segment, so that do_stab_bolted won't get a
@@ -243,18 +245,21 @@ void stabs_alloc(void)
 		if (cpu == 0)
 			continue; /* stab for CPU 0 is statically allocated */
 
-		newstab = lmb_alloc_base(PAGE_SIZE, PAGE_SIZE, 1<<SID_SHIFT);
+		newstab = lmb_alloc_base(HW_PAGE_SIZE, HW_PAGE_SIZE,
+					 1<<SID_SHIFT);
 		if (! newstab)
 			panic("Unable to allocate segment table for CPU %d.\n",
 			      cpu);
 
 		newstab += KERNELBASE;
 
-		memset((void *)newstab, 0, PAGE_SIZE);
+		memset((void *)newstab, 0, HW_PAGE_SIZE);
 
 		paca[cpu].stab_addr = newstab;
 		paca[cpu].stab_real = virt_to_abs(newstab);
-		printk(KERN_DEBUG "Segment table for CPU %d at 0x%lx virtual, 0x%lx absolute\n", cpu, paca[cpu].stab_addr, paca[cpu].stab_real);
+		printk(KERN_INFO "Segment table for CPU %d at 0x%lx "
+		       "virtual, 0x%lx absolute\n",
+		       cpu, paca[cpu].stab_addr, paca[cpu].stab_real);
 	}
 }
 
@@ -266,14 +271,28 @@ void stabs_alloc(void)
 void stab_initialize(unsigned long stab)
 {
 	unsigned long vsid = get_kernel_vsid(KERNELBASE);
+	unsigned long stabreal;
 
-	if (cpu_has_feature(CPU_FTR_SLB)) {
-		slb_initialize();
-	} else {
-		asm volatile("isync; slbia; isync":::"memory");
-		make_ste(stab, GET_ESID(KERNELBASE), vsid);
+	asm volatile("isync; slbia; isync":::"memory");
+	make_ste(stab, GET_ESID(KERNELBASE), vsid);
 
-		/* Order update */
-		asm volatile("sync":::"memory");
+	/* Order update */
+	asm volatile("sync":::"memory");
+
+	/* Set ASR */
+	stabreal = get_paca()->stab_real | 0x1ul;
+
+#ifdef CONFIG_PPC_ISERIES
+	if (firmware_has_feature(FW_FEATURE_ISERIES)) {
+		HvCall1(HvCallBaseSetASR, stabreal);
+		return;
+	}
+#endif /* CONFIG_PPC_ISERIES */
+#ifdef CONFIG_PPC_PSERIES
+	if (platform_is_lpar()) {
+		plpar_hcall_norets(H_SET_ASR, stabreal);
+		return;
 	}
+#endif
+	mtspr(SPRN_ASR, stabreal);
 }
diff --git a/arch/powerpc/mm/tlb_32.c b/arch/powerpc/mm/tlb_32.c
new file mode 100644
index 000000000000..ad580f3742e5
--- /dev/null
+++ b/arch/powerpc/mm/tlb_32.c
@@ -0,0 +1,189 @@
+/*
+ * This file contains the routines for TLB flushing.
+ * On machines where the MMU uses a hash table to store virtual to
+ * physical translations, these routines flush entries from the
+ * hash table also.
+ *  -- paulus
+ *
+ *  Derived from arch/ppc/mm/init.c:
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ *    Copyright (C) 1996 Paul Mackerras
+ *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ *  Derived from "arch/i386/mm/init.c"
+ *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/highmem.h>
+#include <asm/tlbflush.h>
+#include <asm/tlb.h>
+
+#include "mmu_decl.h"
+
+/*
+ * Called when unmapping pages to flush entries from the TLB/hash table.
+ */
+void flush_hash_entry(struct mm_struct *mm, pte_t *ptep, unsigned long addr)
+{
+	unsigned long ptephys;
+
+	if (Hash != 0) {
+		ptephys = __pa(ptep) & PAGE_MASK;
+		flush_hash_pages(mm->context, addr, ptephys, 1);
+	}
+}
+
+/*
+ * Called by ptep_set_access_flags, must flush on CPUs for which the
+ * DSI handler can't just "fixup" the TLB on a write fault
+ */
+void flush_tlb_page_nohash(struct vm_area_struct *vma, unsigned long addr)
+{
+	if (Hash != 0)
+		return;
+	_tlbie(addr);
+}
+
+/*
+ * Called at the end of a mmu_gather operation to make sure the
+ * TLB flush is completely done.
+ */
+void tlb_flush(struct mmu_gather *tlb)
+{
+	if (Hash == 0) {
+		/*
+		 * 603 needs to flush the whole TLB here since
+		 * it doesn't use a hash table.
+		 */
+		_tlbia();
+	}
+}
+
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_range(vma, start, end) flushes a range of pages
+ *  - flush_tlb_kernel_range(start, end) flushes kernel pages
+ *
+ * since the hardware hash table functions as an extension of the
+ * tlb as far as the linux tables are concerned, flush it too.
+ *    -- Cort
+ */
+
+/*
+ * 750 SMP is a Bad Idea because the 750 doesn't broadcast all
+ * the cache operations on the bus.  Hence we need to use an IPI
+ * to get the other CPU(s) to invalidate their TLBs.
+ */
+#ifdef CONFIG_SMP_750
+#define FINISH_FLUSH	smp_send_tlb_invalidate(0)
+#else
+#define FINISH_FLUSH	do { } while (0)
+#endif
+
+static void flush_range(struct mm_struct *mm, unsigned long start,
+			unsigned long end)
+{
+	pmd_t *pmd;
+	unsigned long pmd_end;
+	int count;
+	unsigned int ctx = mm->context;
+
+	if (Hash == 0) {
+		_tlbia();
+		return;
+	}
+	start &= PAGE_MASK;
+	if (start >= end)
+		return;
+	end = (end - 1) | ~PAGE_MASK;
+	pmd = pmd_offset(pgd_offset(mm, start), start);
+	for (;;) {
+		pmd_end = ((start + PGDIR_SIZE) & PGDIR_MASK) - 1;
+		if (pmd_end > end)
+			pmd_end = end;
+		if (!pmd_none(*pmd)) {
+			count = ((pmd_end - start) >> PAGE_SHIFT) + 1;
+			flush_hash_pages(ctx, start, pmd_val(*pmd), count);
+		}
+		if (pmd_end == end)
+			break;
+		start = pmd_end + 1;
+		++pmd;
+	}
+}
+
+/*
+ * Flush kernel TLB entries in the given range
+ */
+void flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+	flush_range(&init_mm, start, end);
+	FINISH_FLUSH;
+}
+
+/*
+ * Flush all the (user) entries for the address space described by mm.
+ */
+void flush_tlb_mm(struct mm_struct *mm)
+{
+	struct vm_area_struct *mp;
+
+	if (Hash == 0) {
+		_tlbia();
+		return;
+	}
+
+	/*
+	 * It is safe to go down the mm's list of vmas when called
+	 * from dup_mmap, holding mmap_sem.  It would also be safe from
+	 * unmap_region or exit_mmap, but not from vmtruncate on SMP -
+	 * but it seems dup_mmap is the only SMP case which gets here.
+	 */
+	for (mp = mm->mmap; mp != NULL; mp = mp->vm_next)
+		flush_range(mp->vm_mm, mp->vm_start, mp->vm_end);
+	FINISH_FLUSH;
+}
+
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
+{
+	struct mm_struct *mm;
+	pmd_t *pmd;
+
+	if (Hash == 0) {
+		_tlbie(vmaddr);
+		return;
+	}
+	mm = (vmaddr < TASK_SIZE)? vma->vm_mm: &init_mm;
+	pmd = pmd_offset(pgd_offset(mm, vmaddr), vmaddr);
+	if (!pmd_none(*pmd))
+		flush_hash_pages(mm->context, vmaddr, pmd_val(*pmd), 1);
+	FINISH_FLUSH;
+}
+
+/*
+ * For each address in the range, find the pte for the address
+ * and check _PAGE_HASHPTE bit; if it is set, find and destroy
+ * the corresponding HPTE.
+ */
+void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+		     unsigned long end)
+{
+	flush_range(vma->vm_mm, start, end);
+	FINISH_FLUSH;
+}
diff --git a/arch/ppc64/mm/tlb.c b/arch/powerpc/mm/tlb_64.c
index d8a6593a13f0..859d29a0cac5 100644
--- a/arch/ppc64/mm/tlb.c
+++ b/arch/powerpc/mm/tlb_64.c
@@ -21,6 +21,7 @@
  *  as published by the Free Software Foundation; either version
  *  2 of the License, or (at your option) any later version.
  */
+
 #include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
@@ -30,7 +31,7 @@
 #include <asm/pgalloc.h>
 #include <asm/tlbflush.h>
 #include <asm/tlb.h>
-#include <linux/highmem.h>
+#include <asm/bug.h>
 
 DEFINE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch);
 
@@ -94,7 +95,7 @@ static void pte_free_submit(struct pte_freelist_batch *batch)
 
 void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf)
 {
-	/* This is safe as we are holding page_table_lock */
+	/* This is safe since tlb_gather_mmu has disabled preemption */
         cpumask_t local_cpumask = cpumask_of_cpu(smp_processor_id());
 	struct pte_freelist_batch **batchp = &__get_cpu_var(pte_freelist_cur);
 
@@ -126,34 +127,54 @@ void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf)
  * (if we remove it we should clear the _PTE_HPTEFLAGS bits).
  */
 void hpte_update(struct mm_struct *mm, unsigned long addr,
-		 unsigned long pte, int wrprot)
+		 pte_t *ptep, unsigned long pte, int huge)
 {
-	int i;
-	unsigned long context = 0;
 	struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch);
+	unsigned long vsid;
+	unsigned int psize = mmu_virtual_psize;
+	int i;
 
-	if (REGION_ID(addr) == USER_REGION_ID)
-		context = mm->context.id;
 	i = batch->index;
 
+	/* We mask the address for the base page size. Huge pages will
+	 * have applied their own masking already
+	 */
+	addr &= PAGE_MASK;
+
+	/* Get page size (maybe move back to caller) */
+	if (huge) {
+#ifdef CONFIG_HUGETLB_PAGE
+		psize = mmu_huge_psize;
+#else
+		BUG();
+#endif
+	}
+
 	/*
 	 * This can happen when we are in the middle of a TLB batch and
 	 * we encounter memory pressure (eg copy_page_range when it tries
 	 * to allocate a new pte). If we have to reclaim memory and end
 	 * up scanning and resetting referenced bits then our batch context
 	 * will change mid stream.
+	 *
+	 * We also need to ensure only one page size is present in a given
+	 * batch
 	 */
-	if (unlikely(i != 0 && context != batch->context)) {
+	if (i != 0 && (mm != batch->mm || batch->psize != psize)) {
 		flush_tlb_pending();
 		i = 0;
 	}
-
 	if (i == 0) {
-		batch->context = context;
 		batch->mm = mm;
+		batch->psize = psize;
 	}
-	batch->pte[i] = __pte(pte);
-	batch->addr[i] = addr;
+	if (addr < KERNELBASE) {
+		vsid = get_vsid(mm->context.id, addr);
+		WARN_ON(vsid == 0);
+	} else
+		vsid = get_kernel_vsid(addr);
+	batch->vaddr[i] = (vsid << 28 ) | (addr & 0x0fffffff);
+	batch->pte[i] = __real_pte(__pte(pte), ptep);
 	batch->index = ++i;
 	if (i >= PPC64_TLB_BATCH_NR)
 		flush_tlb_pending();
@@ -175,17 +196,17 @@ void __flush_tlb_pending(struct ppc64_tlb_batch *batch)
 		local = 1;
 
 	if (i == 1)
-		flush_hash_page(batch->context, batch->addr[0], batch->pte[0],
-				local);
+		flush_hash_page(batch->vaddr[0], batch->pte[0],
+				batch->psize, local);
 	else
-		flush_hash_range(batch->context, i, local);
+		flush_hash_range(i, local);
 	batch->index = 0;
 	put_cpu();
 }
 
 void pte_free_finish(void)
 {
-	/* This is safe as we are holding page_table_lock */
+	/* This is safe since tlb_gather_mmu has disabled preemption */
 	struct pte_freelist_batch **batchp = &__get_cpu_var(pte_freelist_cur);
 
 	if (*batchp == NULL)
diff --git a/arch/ppc/oprofile/Kconfig b/arch/powerpc/oprofile/Kconfig
index 19d37730b664..eb2dece76a54 100644
--- a/arch/ppc/oprofile/Kconfig
+++ b/arch/powerpc/oprofile/Kconfig
@@ -1,7 +1,3 @@
-
-menu "Profiling support"
-	depends on EXPERIMENTAL
-
 config PROFILING
 	bool "Profiling support (EXPERIMENTAL)"
 	help
@@ -19,5 +15,3 @@ config OPROFILE
 
 	  If unsure, say N.
 
-endmenu
-
diff --git a/arch/ppc/oprofile/Makefile b/arch/powerpc/oprofile/Makefile
index e2218d32a4eb..0782d0cca89c 100644
--- a/arch/ppc/oprofile/Makefile
+++ b/arch/powerpc/oprofile/Makefile
@@ -7,8 +7,5 @@ DRIVER_OBJS := $(addprefix ../../../drivers/oprofile/, \
 		timer_int.o )
 
 oprofile-y := $(DRIVER_OBJS) common.o
-
-ifeq ($(CONFIG_FSL_BOOKE),y)
-	oprofile-y += op_model_fsl_booke.o
-endif
-
+oprofile-$(CONFIG_PPC64) += op_model_rs64.o op_model_power4.o
+oprofile-$(CONFIG_FSL_BOOKE) += op_model_fsl_booke.o
diff --git a/arch/ppc64/oprofile/common.c b/arch/powerpc/oprofile/common.c
index e5f572710aa0..af2c05d20ba5 100644
--- a/arch/ppc64/oprofile/common.c
+++ b/arch/powerpc/oprofile/common.c
@@ -1,5 +1,9 @@
 /*
+ * PPC 64 oprofile support:
  * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
+ * PPC 32 oprofile support: (based on PPC 64 support)
+ * Copyright (C) Freescale Semiconductor, Inc 2004
+ *	Author: Andy Fleming
  *
  * Based on alpha version.
  *
@@ -10,6 +14,9 @@
  */
 
 #include <linux/oprofile.h>
+#ifndef __powerpc64__
+#include <linux/slab.h>
+#endif /* ! __powerpc64__ */
 #include <linux/init.h>
 #include <linux/smp.h>
 #include <linux/errno.h>
@@ -19,17 +26,21 @@
 #include <asm/cputable.h>
 #include <asm/oprofile_impl.h>
 
-static struct op_ppc64_model *model;
+static struct op_powerpc_model *model;
 
 static struct op_counter_config ctr[OP_MAX_COUNTER];
 static struct op_system_config sys;
 
+#ifndef __powerpc64__
+static char *cpu_type;
+#endif /* ! __powerpc64__ */
+
 static void op_handle_interrupt(struct pt_regs *regs)
 {
 	model->handle_interrupt(regs, ctr);
 }
 
-static int op_ppc64_setup(void)
+static int op_powerpc_setup(void)
 {
 	int err;
 
@@ -42,41 +53,49 @@ static int op_ppc64_setup(void)
 	model->reg_setup(ctr, &sys, model->num_counters);
 
 	/* Configure the registers on all cpus.  */
+#ifdef __powerpc64__
 	on_each_cpu(model->cpu_setup, NULL, 0, 1);
+#else /* __powerpc64__ */
+#if 0
+	/* FIXME: Make multi-cpu work */
+	on_each_cpu(model->reg_setup, NULL, 0, 1);
+#endif
+#endif /* __powerpc64__ */
 
 	return 0;
 }
 
-static void op_ppc64_shutdown(void)
+static void op_powerpc_shutdown(void)
 {
 	release_pmc_hardware();
 }
 
-static void op_ppc64_cpu_start(void *dummy)
+static void op_powerpc_cpu_start(void *dummy)
 {
 	model->start(ctr);
 }
 
-static int op_ppc64_start(void)
+static int op_powerpc_start(void)
 {
-	on_each_cpu(op_ppc64_cpu_start, NULL, 0, 1);
+	on_each_cpu(op_powerpc_cpu_start, NULL, 0, 1);
 	return 0;
 }
 
-static inline void op_ppc64_cpu_stop(void *dummy)
+static inline void op_powerpc_cpu_stop(void *dummy)
 {
 	model->stop();
 }
 
-static void op_ppc64_stop(void)
+static void op_powerpc_stop(void)
 {
-	on_each_cpu(op_ppc64_cpu_stop, NULL, 0, 1);
+	on_each_cpu(op_powerpc_cpu_stop, NULL, 0, 1);
 }
 
-static int op_ppc64_create_files(struct super_block *sb, struct dentry *root)
+static int op_powerpc_create_files(struct super_block *sb, struct dentry *root)
 {
 	int i;
 
+#ifdef __powerpc64__
 	/*
 	 * There is one mmcr0, mmcr1 and mmcra for setting the events for
 	 * all of the counters.
@@ -84,6 +103,7 @@ static int op_ppc64_create_files(struct super_block *sb, struct dentry *root)
 	oprofilefs_create_ulong(sb, root, "mmcr0", &sys.mmcr0);
 	oprofilefs_create_ulong(sb, root, "mmcr1", &sys.mmcr1);
 	oprofilefs_create_ulong(sb, root, "mmcra", &sys.mmcra);
+#endif /* __powerpc64__ */
 
 	for (i = 0; i < model->num_counters; ++i) {
 		struct dentry *dir;
@@ -95,44 +115,70 @@ static int op_ppc64_create_files(struct super_block *sb, struct dentry *root)
 		oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
 		oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
 		oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
+#ifdef __powerpc64__
 		/*
 		 * We dont support per counter user/kernel selection, but
 		 * we leave the entries because userspace expects them
 		 */
+#endif /* __powerpc64__ */
 		oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
 		oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
+
+#ifndef __powerpc64__
+		/* FIXME: Not sure if this is used */
+#endif /* ! __powerpc64__ */
 		oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask);
 	}
 
 	oprofilefs_create_ulong(sb, root, "enable_kernel", &sys.enable_kernel);
 	oprofilefs_create_ulong(sb, root, "enable_user", &sys.enable_user);
+#ifdef __powerpc64__
 	oprofilefs_create_ulong(sb, root, "backtrace_spinlocks",
 				&sys.backtrace_spinlocks);
+#endif /* __powerpc64__ */
 
 	/* Default to tracing both kernel and user */
 	sys.enable_kernel = 1;
 	sys.enable_user = 1;
-
+#ifdef __powerpc64__
 	/* Turn on backtracing through spinlocks by default */
 	sys.backtrace_spinlocks = 1;
+#endif /* __powerpc64__ */
 
 	return 0;
 }
 
 int __init oprofile_arch_init(struct oprofile_operations *ops)
 {
+#ifndef __powerpc64__
+#ifdef CONFIG_FSL_BOOKE
+	model = &op_model_fsl_booke;
+#else
+	return -ENODEV;
+#endif
+
+	cpu_type = kmalloc(32, GFP_KERNEL);
+	if (NULL == cpu_type)
+		return -ENOMEM;
+
+	sprintf(cpu_type, "ppc/%s", cur_cpu_spec->cpu_name);
+
+	model->num_counters = cur_cpu_spec->num_pmcs;
+
+	ops->cpu_type = cpu_type;
+#else /* __powerpc64__ */
 	if (!cur_cpu_spec->oprofile_model || !cur_cpu_spec->oprofile_cpu_type)
 		return -ENODEV;
-
 	model = cur_cpu_spec->oprofile_model;
 	model->num_counters = cur_cpu_spec->num_pmcs;
 
 	ops->cpu_type = cur_cpu_spec->oprofile_cpu_type;
-	ops->create_files = op_ppc64_create_files;
-	ops->setup = op_ppc64_setup;
-	ops->shutdown = op_ppc64_shutdown;
-	ops->start = op_ppc64_start;
-	ops->stop = op_ppc64_stop;
+#endif /* __powerpc64__ */
+	ops->create_files = op_powerpc_create_files;
+	ops->setup = op_powerpc_setup;
+	ops->shutdown = op_powerpc_shutdown;
+	ops->start = op_powerpc_start;
+	ops->stop = op_powerpc_stop;
 
 	printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
 	       ops->cpu_type);
@@ -142,4 +188,8 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 
 void oprofile_arch_exit(void)
 {
+#ifndef __powerpc64__
+	kfree(cpu_type);
+	cpu_type = NULL;
+#endif /* ! __powerpc64__ */
 }
diff --git a/arch/ppc/oprofile/op_model_fsl_booke.c b/arch/powerpc/oprofile/op_model_fsl_booke.c
index fc9c859358c6..26539cda6023 100644
--- a/arch/ppc/oprofile/op_model_fsl_booke.c
+++ b/arch/powerpc/oprofile/op_model_fsl_booke.c
@@ -7,7 +7,7 @@
  * Copyright (c) 2004 Freescale Semiconductor, Inc
  *
  * Author: Andy Fleming
- * Maintainer: Kumar Gala <Kumar.Gala@freescale.com>
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -24,9 +24,8 @@
 #include <asm/cputable.h>
 #include <asm/reg_booke.h>
 #include <asm/page.h>
-#include <asm/perfmon.h>
-
-#include "op_impl.h"
+#include <asm/pmc.h>
+#include <asm/oprofile_impl.h>
 
 static unsigned long reset_value[OP_MAX_COUNTER];
 
@@ -176,7 +175,7 @@ static void fsl_booke_handle_interrupt(struct pt_regs *regs,
 	pmc_start_ctrs(1);
 }
 
-struct op_ppc32_model op_model_fsl_booke = {
+struct op_powerpc_model op_model_fsl_booke = {
 	.reg_setup		= fsl_booke_reg_setup,
 	.start			= fsl_booke_start,
 	.stop			= fsl_booke_stop,
diff --git a/arch/ppc64/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c
index 32b2bb5625fe..a3401b46f3ba 100644
--- a/arch/ppc64/oprofile/op_model_power4.c
+++ b/arch/powerpc/oprofile/op_model_power4.c
@@ -14,9 +14,9 @@
 #include <asm/system.h>
 #include <asm/processor.h>
 #include <asm/cputable.h>
-#include <asm/systemcfg.h>
 #include <asm/rtas.h>
 #include <asm/oprofile_impl.h>
+#include <asm/reg.h>
 
 #define dbg(args...)
 
@@ -81,6 +81,26 @@ static void power4_reg_setup(struct op_counter_config *ctr,
 
 extern void ppc64_enable_pmcs(void);
 
+/*
+ * Older CPUs require the MMCRA sample bit to be always set, but newer 
+ * CPUs only want it set for some groups. Eventually we will remove all
+ * knowledge of this bit in the kernel, oprofile userspace should be
+ * setting it when required.
+ *
+ * In order to keep current installations working we force the bit for
+ * those older CPUs. Once everyone has updated their oprofile userspace we
+ * can remove this hack.
+ */
+static inline int mmcra_must_set_sample(void)
+{
+	if (__is_processor(PV_POWER4) || __is_processor(PV_POWER4p) ||
+	    __is_processor(PV_970) || __is_processor(PV_970FX) ||
+	    __is_processor(PV_970MP))
+		return 1;
+
+	return 0;
+}
+
 static void power4_cpu_setup(void *unused)
 {
 	unsigned int mmcr0 = mmcr0_val;
@@ -98,7 +118,8 @@ static void power4_cpu_setup(void *unused)
 
 	mtspr(SPRN_MMCR1, mmcr1_val);
 
-	mmcra |= MMCRA_SAMPLE_ENABLE;
+	if (mmcra_must_set_sample())
+		mmcra |= MMCRA_SAMPLE_ENABLE;
 	mtspr(SPRN_MMCRA, mmcra);
 
 	dbg("setup on cpu %d, mmcr0 %lx\n", smp_processor_id(),
@@ -211,8 +232,7 @@ static unsigned long get_pc(struct pt_regs *regs)
 	mmcra = mfspr(SPRN_MMCRA);
 
 	/* Were we in the hypervisor? */
-	if ((systemcfg->platform == PLATFORM_PSERIES_LPAR) &&
-	    (mmcra & MMCRA_SIHV))
+	if (platform_is_lpar() && (mmcra & MMCRA_SIHV))
 		/* function descriptor madness */
 		return *((unsigned long *)hypervisor_bucket);
 
@@ -300,7 +320,7 @@ static void power4_handle_interrupt(struct pt_regs *regs,
 	mtspr(SPRN_MMCR0, mmcr0);
 }
 
-struct op_ppc64_model op_model_power4 = {
+struct op_powerpc_model op_model_power4 = {
 	.reg_setup		= power4_reg_setup,
 	.cpu_setup		= power4_cpu_setup,
 	.start			= power4_start,
diff --git a/arch/ppc64/oprofile/op_model_rs64.c b/arch/powerpc/oprofile/op_model_rs64.c
index 08c5b333f5c4..e010b85996e8 100644
--- a/arch/ppc64/oprofile/op_model_rs64.c
+++ b/arch/powerpc/oprofile/op_model_rs64.c
@@ -209,7 +209,7 @@ static void rs64_handle_interrupt(struct pt_regs *regs,
 	mtspr(SPRN_MMCR0, mmcr0);
 }
 
-struct op_ppc64_model op_model_rs64 = {
+struct op_powerpc_model op_model_rs64 = {
 	.reg_setup		= rs64_reg_setup,
 	.cpu_setup		= rs64_cpu_setup,
 	.start			= rs64_start,
diff --git a/arch/powerpc/platforms/4xx/Kconfig b/arch/powerpc/platforms/4xx/Kconfig
new file mode 100644
index 000000000000..ed39d6a3d22a
--- /dev/null
+++ b/arch/powerpc/platforms/4xx/Kconfig
@@ -0,0 +1,280 @@
+config 4xx
+	bool
+	depends on 40x || 44x
+	default y
+
+config WANT_EARLY_SERIAL
+	bool
+	select SERIAL_8250
+	default n
+
+menu "AMCC 4xx options"
+	depends on 4xx
+
+choice
+	prompt "Machine Type"
+	depends on 40x
+	default WALNUT
+
+config BUBINGA
+	bool "Bubinga"
+	select WANT_EARLY_SERIAL
+	help
+	  This option enables support for the IBM 405EP evaluation board.
+
+config CPCI405
+	bool "CPCI405"
+	help
+	  This option enables support for the CPCI405 board.
+
+config EP405
+	bool "EP405/EP405PC"
+	help
+	  This option enables support for the EP405/EP405PC boards.
+
+config REDWOOD_5
+	bool "Redwood-5"
+	help
+	  This option enables support for the IBM STB04 evaluation board.
+
+config REDWOOD_6
+	bool "Redwood-6"
+	help
+	  This option enables support for the IBM STBx25xx evaluation board.
+
+config SYCAMORE
+	bool "Sycamore"
+	help
+	  This option enables support for the IBM PPC405GPr evaluation board.
+
+config WALNUT
+	bool "Walnut"
+	help
+	  This option enables support for the IBM PPC405GP evaluation board.
+
+config XILINX_ML300
+	bool "Xilinx-ML300"
+	help
+	  This option enables support for the Xilinx ML300 evaluation board.
+
+endchoice
+
+choice
+	prompt "Machine Type"
+	depends on 44x
+	default EBONY
+
+config BAMBOO
+	bool "Bamboo"
+	select WANT_EARLY_SERIAL
+	help
+	  This option enables support for the IBM PPC440EP evaluation board.
+
+config EBONY
+	bool "Ebony"
+	select WANT_EARLY_SERIAL
+	help
+	  This option enables support for the IBM PPC440GP evaluation board.
+
+config LUAN
+	bool "Luan"
+	select WANT_EARLY_SERIAL
+	help
+	  This option enables support for the IBM PPC440SP evaluation board.
+
+config OCOTEA
+	bool "Ocotea"
+	select WANT_EARLY_SERIAL
+	help
+	  This option enables support for the IBM PPC440GX evaluation board.
+
+endchoice
+
+config EP405PC
+	bool "EP405PC Support"
+	depends on EP405
+
+
+# It's often necessary to know the specific 4xx processor type.
+# Fortunately, it is impled (so far) from the board type, so we
+# don't need to ask more redundant questions.
+config NP405H
+	bool
+	depends on ASH
+	default y
+
+config 440EP
+	bool
+	depends on BAMBOO
+	select PPC_FPU
+	default y
+
+config 440GP
+	bool
+	depends on EBONY
+	default y
+
+config 440GX
+	bool
+	depends on OCOTEA
+	default y
+
+config 440SP
+	bool
+	depends on LUAN
+	default y
+
+config 440
+	bool
+	depends on 440GP || 440SP || 440EP
+	default y
+
+config 440A
+	bool
+	depends on 440GX
+	default y
+
+config IBM440EP_ERR42
+	bool
+	depends on 440EP
+	default y
+
+# All 405-based cores up until the 405GPR and 405EP have this errata.
+config IBM405_ERR77
+	bool
+	depends on 40x && !403GCX && !405GPR && !405EP
+	default y
+
+# All 40x-based cores, up until the 405GPR and 405EP have this errata.
+config IBM405_ERR51
+	bool
+	depends on 40x && !405GPR && !405EP
+	default y
+
+config BOOKE
+	bool
+	depends on 44x
+	default y
+
+config IBM_OCP
+	bool
+	depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
+	default y
+
+config XILINX_OCP
+	bool
+	depends on XILINX_ML300
+	default y
+
+config IBM_EMAC4
+	bool
+	depends on 440GX || 440SP
+	default y
+
+config BIOS_FIXUP
+	bool
+	depends on BUBINGA || EP405 || SYCAMORE || WALNUT
+	default y
+
+# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
+config 403GCX
+	bool
+	depends OAK
+	default y
+
+config 405EP
+	bool
+	depends on BUBINGA
+	default y
+
+config 405GP
+	bool
+	depends on CPCI405 || EP405 || WALNUT
+	default y
+
+config 405GPR
+	bool
+	depends on SYCAMORE
+	default y
+
+config VIRTEX_II_PRO
+	bool
+	depends on XILINX_ML300
+	default y
+
+config STB03xxx
+	bool
+	depends on REDWOOD_5 || REDWOOD_6
+	default y
+
+config EMBEDDEDBOOT
+	bool
+	depends on EP405 || XILINX_ML300
+	default y
+
+config IBM_OPENBIOS
+	bool
+	depends on ASH || BUBINGA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
+	default y
+
+config PPC4xx_DMA
+	bool "PPC4xx DMA controller support"
+	depends on 4xx
+
+config PPC4xx_EDMA
+	bool
+	depends on !STB03xxx && PPC4xx_DMA
+	default y
+
+config PPC_GEN550
+	bool
+	depends on 4xx
+	default y
+
+choice
+	prompt "TTYS0 device and default console"
+	depends on 40x
+	default UART0_TTYS0
+
+config UART0_TTYS0
+	bool "UART0"
+
+config UART0_TTYS1
+	bool "UART1"
+
+endchoice
+
+config SERIAL_SICC
+	bool "SICC Serial port support"
+	depends on STB03xxx
+
+config UART1_DFLT_CONSOLE
+	bool
+	depends on SERIAL_SICC && UART0_TTYS1
+	default y
+
+config SERIAL_SICC_CONSOLE
+	bool
+	depends on SERIAL_SICC && UART0_TTYS1
+	default y
+endmenu
+
+
+menu "IBM 40x options"
+	depends on 40x
+
+config SERIAL_SICC
+	bool "SICC Serial port"
+	depends on STB03xxx
+
+config UART1_DFLT_CONSOLE
+	bool
+	depends on SERIAL_SICC && UART0_TTYS1
+	default y
+
+config SERIAL_SICC_CONSOLE
+	bool
+	depends on SERIAL_SICC && UART0_TTYS1
+	default y
+
+endmenu
diff --git a/arch/powerpc/platforms/4xx/Makefile b/arch/powerpc/platforms/4xx/Makefile
new file mode 100644
index 000000000000..79ff6b1e887c
--- /dev/null
+++ b/arch/powerpc/platforms/4xx/Makefile
@@ -0,0 +1 @@
+# empty makefile so make clean works
\ No newline at end of file
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
new file mode 100644
index 000000000000..c5bc2821d991
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -0,0 +1,86 @@
+config 85xx
+	bool
+	depends on E500
+	default y
+
+config PPC_INDIRECT_PCI_BE
+	bool
+	depends on 85xx
+	default y
+
+menu "Freescale 85xx options"
+	depends on E500
+
+choice
+	prompt "Machine Type"
+	depends on 85xx
+	default MPC8540_ADS
+
+config MPC8540_ADS
+	bool "Freescale MPC8540 ADS"
+	help
+	  This option enables support for the MPC 8540 ADS evaluation board.
+
+config MPC8548_CDS
+	bool "Freescale MPC8548 CDS"
+	help
+	  This option enablese support for the MPC8548 CDS evaluation board.
+
+config MPC8555_CDS
+	bool "Freescale MPC8555 CDS"
+	help
+	  This option enablese support for the MPC8555 CDS evaluation board.
+
+config MPC8560_ADS
+	bool "Freescale MPC8560 ADS"
+	help
+	  This option enables support for the MPC 8560 ADS evaluation board.
+
+config SBC8560
+	bool "WindRiver PowerQUICC III SBC8560"
+	help
+	  This option enables support for the WindRiver PowerQUICC III 
+	  SBC8560 board.
+
+config STX_GP3
+	bool "Silicon Turnkey Express GP3"
+	help
+	  This option enables support for the Silicon Turnkey Express GP3
+	  board.
+
+endchoice
+
+# It's often necessary to know the specific 85xx processor type.
+# Fortunately, it is implied (so far) from the board type, so we
+# don't need to ask more redundant questions.
+config MPC8540
+	bool
+	depends on MPC8540_ADS
+	default y
+
+config MPC8548
+	bool
+	depends on MPC8548_CDS
+	default y
+
+config MPC8555
+	bool
+	depends on MPC8555_CDS
+	default y
+
+config MPC8560
+	bool
+	depends on SBC8560 || MPC8560_ADS || STX_GP3
+	default y
+
+config 85xx_PCI2
+	bool "Supprt for 2nd PCI host controller"
+	depends on MPC8555_CDS
+	default y
+
+config PPC_GEN550
+	bool
+	depends on MPC8540 || SBC8560 || MPC8555
+	default y
+
+endmenu
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
new file mode 100644
index 000000000000..6407197ffd89
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -0,0 +1 @@
+# empty makefile so make clean works
diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig
new file mode 100644
index 000000000000..c8c0ba3cf8e8
--- /dev/null
+++ b/arch/powerpc/platforms/8xx/Kconfig
@@ -0,0 +1,352 @@
+config FADS
+	bool
+
+choice
+	prompt "8xx Machine Type"
+	depends on 8xx
+	default RPXLITE
+
+config RPXLITE
+	bool "RPX-Lite"
+	---help---
+	  Single-board computers based around the PowerPC MPC8xx chips and
+	  intended for embedded applications.  The following types are
+	  supported:
+
+	  RPX-Lite:
+	  Embedded Planet RPX Lite. PC104 form-factor SBC based on the MPC823.
+
+	  RPX-Classic:
+	  Embedded Planet RPX Classic Low-fat. Credit-card-size SBC based on
+	  the MPC 860
+
+	  BSE-IP:
+	  Bright Star Engineering ip-Engine.
+
+	  TQM823L:
+	  TQM850L:
+	  TQM855L:
+	  TQM860L:
+	  MPC8xx based family of mini modules, half credit card size,
+	  up to 64 MB of RAM, 8 MB Flash, (Fast) Ethernet, 2 x serial ports,
+	  2 x CAN bus interface, ...
+	  Manufacturer: TQ Components, www.tq-group.de
+	  Date of Release: October (?) 1999
+	  End of Life: not yet :-)
+	  URL:
+	  - module: <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>
+	  - starter kit: <http://www.denx.de/PDF/STK8xxLHWM201.pdf>
+	  - images: <http://www.denx.de/embedded-ppc-en.html>
+
+	  FPS850L:
+	  FingerPrint Sensor System (based on TQM850L)
+	  Manufacturer: IKENDI AG, <http://www.ikendi.com/>
+	  Date of Release: November 1999
+	  End of life: end 2000 ?
+	  URL: see TQM850L
+
+	  IVMS8:
+	  MPC860 based board used in the "Integrated Voice Mail System",
+	  Small Version (8 voice channels)
+	  Manufacturer: Speech Design, <http://www.speech-design.de/>
+	  Date of Release: December 2000 (?)
+	  End of life: -
+	  URL: <http://www.speech-design.de/>
+
+	  IVML24:
+	  MPC860 based board used in the "Integrated Voice Mail System",
+	  Large Version (24 voice channels)
+	  Manufacturer: Speech Design, <http://www.speech-design.de/>
+	  Date of Release: March 2001  (?)
+	  End of life: -
+	  URL: <http://www.speech-design.de/>
+
+	  HERMES:
+	  Hermes-Pro ISDN/LAN router with integrated 8 x hub
+	  Manufacturer: Multidata Gesellschaft fur Datentechnik und Informatik
+	  <http://www.multidata.de/>
+	  Date of Release: 2000 (?)
+	  End of life: -
+	  URL: <http://www.multidata.de/english/products/hpro.htm>
+
+	  IP860:
+	  VMEBus IP (Industry Pack) carrier board with MPC860
+	  Manufacturer: MicroSys GmbH, <http://www.microsys.de/>
+	  Date of Release: ?
+	  End of life: -
+	  URL: <http://www.microsys.de/html/ip860.html>
+
+	  PCU_E:
+	  PCU = Peripheral Controller Unit, Extended
+	  Manufacturer: Siemens AG, ICN (Information and Communication Networks)
+	  	<http://www.siemens.de/page/1,3771,224315-1-999_2_226207-0,00.html>
+	  Date of Release: April 2001
+	  End of life: August 2001
+	  URL: n. a.
+
+config RPXCLASSIC
+	bool "RPX-Classic"
+	help
+	  The RPX-Classic is a single-board computer based on the Motorola
+	  MPC860.  It features 16MB of DRAM and a variable amount of flash,
+	  I2C EEPROM, thermal monitoring, a PCMCIA slot, a DIP switch and two
+	  LEDs.  Variants with Ethernet ports exist.  Say Y here to support it
+	  directly.
+
+config BSEIP
+	bool "BSE-IP"
+	help
+	  Say Y here to support the Bright Star Engineering ipEngine SBC.
+	  This is a credit-card-sized device featuring a MPC823 processor,
+	  26MB DRAM, 4MB flash, Ethernet, a 16K-gate FPGA, USB, an LCD/video
+	  controller, and two RS232 ports.
+
+config MPC8XXFADS
+	bool "FADS"
+	select FADS
+
+config MPC86XADS
+	bool "MPC86XADS"
+	help
+	  MPC86x Application Development System by Freescale Semiconductor.
+	  The MPC86xADS is meant to serve as a platform for s/w and h/w
+	  development around the MPC86X processor families.
+	select FADS
+
+config MPC885ADS
+	bool "MPC885ADS"
+	help
+	  Freescale Semiconductor MPC885 Application Development System (ADS).
+	  Also known as DUET.
+	  The MPC885ADS is meant to serve as a platform for s/w and h/w
+	  development around the MPC885 processor family.
+
+config TQM823L
+	bool "TQM823L"
+	help
+	  Say Y here to support the TQM823L, one of an MPC8xx-based family of
+	  mini SBCs (half credit-card size) from TQ Components first released
+	  in late 1999.  Technical references are at
+	  <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
+	  <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
+	  <http://www.denx.de/embedded-ppc-en.html>.
+
+config TQM850L
+	bool "TQM850L"
+	help
+	  Say Y here to support the TQM850L, one of an MPC8xx-based family of
+	  mini SBCs (half credit-card size) from TQ Components first released
+	  in late 1999.  Technical references are at
+	  <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
+	  <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
+	  <http://www.denx.de/embedded-ppc-en.html>.
+
+config TQM855L
+	bool "TQM855L"
+	help
+	  Say Y here to support the TQM855L, one of an MPC8xx-based family of
+	  mini SBCs (half credit-card size) from TQ Components first released
+	  in late 1999.  Technical references are at
+	  <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
+	  <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
+	  <http://www.denx.de/embedded-ppc-en.html>.
+
+config TQM860L
+	bool "TQM860L"
+	help
+	  Say Y here to support the TQM860L, one of an MPC8xx-based family of
+	  mini SBCs (half credit-card size) from TQ Components first released
+	  in late 1999.  Technical references are at
+	  <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
+	  <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
+	  <http://www.denx.de/embedded-ppc-en.html>.
+
+config FPS850L
+	bool "FPS850L"
+
+config IVMS8
+	bool "IVMS8"
+	help
+	  Say Y here to support the Integrated Voice-Mail Small 8-channel SBC
+	  from Speech Design, released March 2001.  The manufacturer's website
+	  is at <http://www.speech-design.de/>.
+
+config IVML24
+	bool "IVML24"
+	help
+	  Say Y here to support the Integrated Voice-Mail Large 24-channel SBC
+	  from Speech Design, released March 2001.  The manufacturer's website
+	  is at <http://www.speech-design.de/>.
+
+config HERMES_PRO
+	bool "HERMES"
+
+config IP860
+	bool "IP860"
+
+config LWMON
+	bool "LWMON"
+
+config PCU_E
+	bool "PCU_E"
+
+config CCM
+	bool "CCM"
+
+config LANTEC
+	bool "LANTEC"
+
+config MBX
+	bool "MBX"
+	help
+	  MBX is a line of Motorola single-board computer based around the
+	  MPC821 and MPC860 processors, and intended for embedded-controller
+	  applications.  Say Y here to support these boards directly.
+
+config WINCEPT
+	bool "WinCept"
+	help
+	  The Wincept 100/110 is a Motorola single-board computer based on the
+	  MPC821 PowerPC, introduced in 1998 and designed to be used in
+	  thin-client machines.  Say Y to support it directly.
+
+endchoice
+
+#
+# MPC8xx Communication options
+#
+
+menu "MPC8xx CPM Options"
+	depends on 8xx
+
+config SCC_ENET
+	bool "CPM SCC Ethernet"
+	depends on NET_ETHERNET
+	help
+	  Enable Ethernet support via the Motorola MPC8xx serial
+	  communications controller.
+
+choice
+	prompt "SCC used for Ethernet"
+	depends on SCC_ENET
+	default SCC1_ENET
+
+config SCC1_ENET
+	bool "SCC1"
+	help
+	  Use MPC8xx serial communications controller 1 to drive Ethernet
+	  (default).
+
+config SCC2_ENET
+	bool "SCC2"
+	help
+	  Use MPC8xx serial communications controller 2 to drive Ethernet.
+
+config SCC3_ENET
+	bool "SCC3"
+	help
+	  Use MPC8xx serial communications controller 3 to drive Ethernet.
+
+endchoice
+
+config FEC_ENET
+	bool "860T FEC Ethernet"
+	depends on NET_ETHERNET
+	help
+	  Enable Ethernet support via the Fast Ethernet Controller (FCC) on
+	  the Motorola MPC8260.
+
+config USE_MDIO
+	bool "Use MDIO for PHY configuration"
+	depends on FEC_ENET
+	help
+	  On some boards the hardware configuration of the ethernet PHY can be
+	  used without any software interaction over the MDIO interface, so
+	  all MII code can be omitted. Say N here if unsure or if you don't
+	  need link status reports.
+
+config  FEC_AM79C874
+	bool "Support AMD79C874 PHY"
+	depends on USE_MDIO
+
+config FEC_LXT970
+	bool "Support LXT970 PHY"
+	depends on USE_MDIO
+
+config FEC_LXT971
+	bool "Support LXT971 PHY"
+	depends on USE_MDIO
+	
+config FEC_QS6612
+	bool "Support QS6612 PHY"
+	depends on USE_MDIO
+	
+config ENET_BIG_BUFFERS
+	bool "Use Big CPM Ethernet Buffers"
+	depends on SCC_ENET || FEC_ENET
+	help
+	  Allocate large buffers for MPC8xx Ethernet. Increases throughput
+	  and decreases the likelihood of dropped packets, but costs memory.
+
+config HTDMSOUND
+	bool "Embedded Planet HIOX Audio"
+	depends on SOUND=y
+
+# This doesn't really belong here, but it is convenient to ask
+# 8xx specific questions.
+comment "Generic MPC8xx Options"
+
+config 8xx_COPYBACK
+	bool "Copy-Back Data Cache (else Writethrough)"
+	help
+	  Saying Y here will cause the cache on an MPC8xx processor to be used
+	  in Copy-Back mode.  If you say N here, it is used in Writethrough
+	  mode.
+
+	  If in doubt, say Y here.
+
+config 8xx_CPU6
+	bool "CPU6 Silicon Errata (860 Pre Rev. C)"
+	help
+	  MPC860 CPUs, prior to Rev C have some bugs in the silicon, which
+	  require workarounds for Linux (and most other OSes to work).  If you
+	  get a BUG() very early in boot, this might fix the problem.  For
+	  more details read the document entitled "MPC860 Family Device Errata
+	  Reference" on Motorola's website.  This option also incurs a
+	  performance hit.
+
+	  If in doubt, say N here.
+
+choice
+	prompt "Microcode patch selection"
+	default NO_UCODE_PATCH
+	help
+	  Help not implemented yet, coming soon.
+
+config NO_UCODE_PATCH
+	bool "None"
+
+config USB_SOF_UCODE_PATCH
+	bool "USB SOF patch"
+	help
+	  Help not implemented yet, coming soon.
+
+config I2C_SPI_UCODE_PATCH
+	bool "I2C/SPI relocation patch"
+	help
+	  Help not implemented yet, coming soon.
+
+config I2C_SPI_SMC1_UCODE_PATCH
+	bool "I2C/SPI/SMC1 relocation patch"
+	help
+	  Help not implemented yet, coming soon.
+
+endchoice
+
+config UCODE_PATCH
+	bool
+	default y
+	depends on !NO_UCODE_PATCH
+
+endmenu
+
diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile
new file mode 100644
index 000000000000..8836b3a00668
--- /dev/null
+++ b/arch/powerpc/platforms/Makefile
@@ -0,0 +1,14 @@
+ifeq ($(CONFIG_PPC_MERGE),y)
+obj-$(CONFIG_PPC_PMAC)		+= powermac/
+else
+ifeq ($(CONFIG_PPC64),y)
+obj-$(CONFIG_PPC_PMAC)		+= powermac/
+endif
+endif
+obj-$(CONFIG_PPC_CHRP)		+= chrp/
+obj-$(CONFIG_4xx)		+= 4xx/
+obj-$(CONFIG_85xx)		+= 85xx/
+obj-$(CONFIG_PPC_PSERIES)	+= pseries/
+obj-$(CONFIG_PPC_ISERIES)	+= iseries/
+obj-$(CONFIG_PPC_MAPLE)		+= maple/
+obj-$(CONFIG_PPC_CELL)		+= cell/
diff --git a/arch/powerpc/platforms/apus/Kconfig b/arch/powerpc/platforms/apus/Kconfig
new file mode 100644
index 000000000000..6bde3bffed86
--- /dev/null
+++ b/arch/powerpc/platforms/apus/Kconfig
@@ -0,0 +1,130 @@
+
+config AMIGA
+	bool
+	depends on APUS
+	default y
+	help
+	  This option enables support for the Amiga series of computers.
+
+config ZORRO
+	bool
+	depends on APUS
+	default y
+	help
+	  This enables support for the Zorro bus in the Amiga. If you have
+	  expansion cards in your Amiga that conform to the Amiga
+	  AutoConfig(tm) specification, say Y, otherwise N. Note that even
+	  expansion cards that do not fit in the Zorro slots but fit in e.g.
+	  the CPU slot may fall in this category, so you have to say Y to let
+	  Linux use these.
+
+config ABSTRACT_CONSOLE
+	bool
+	depends on APUS
+	default y
+
+config APUS_FAST_EXCEPT
+	bool
+	depends on APUS
+	default y
+
+config AMIGA_PCMCIA
+	bool "Amiga 1200/600 PCMCIA support"
+	depends on APUS && EXPERIMENTAL
+	help
+	  Include support in the kernel for pcmcia on Amiga 1200 and Amiga
+	  600. If you intend to use pcmcia cards say Y; otherwise say N.
+
+config AMIGA_BUILTIN_SERIAL
+	tristate "Amiga builtin serial support"
+	depends on APUS
+	help
+	  If you want to use your Amiga's built-in serial port in Linux,
+	  answer Y.
+
+	  To compile this driver as a module, choose M here.
+
+config GVPIOEXT
+	tristate "GVP IO-Extender support"
+	depends on APUS
+	help
+	  If you want to use a GVP IO-Extender serial card in Linux, say Y.
+	  Otherwise, say N.
+
+config GVPIOEXT_LP
+	tristate "GVP IO-Extender parallel printer support"
+	depends on GVPIOEXT
+	help
+	  Say Y to enable driving a printer from the parallel port on your
+	  GVP IO-Extender card, N otherwise.
+
+config GVPIOEXT_PLIP
+	tristate "GVP IO-Extender PLIP support"
+	depends on GVPIOEXT
+	help
+	  Say Y to enable doing IP over the parallel port on your GVP
+	  IO-Extender card, N otherwise.
+
+config MULTIFACE_III_TTY
+	tristate "Multiface Card III serial support"
+	depends on APUS
+	help
+	  If you want to use a Multiface III card's serial port in Linux,
+	  answer Y.
+
+	  To compile this driver as a module, choose M here.
+
+config A2232
+	tristate "Commodore A2232 serial support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && APUS
+	---help---
+	  This option supports the 2232 7-port serial card shipped with the
+	  Amiga 2000 and other Zorro-bus machines, dating from 1989.  At
+	  a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip
+	  each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The
+	  ports were connected with 8 pin DIN connectors on the card bracket,
+	  for which 8 pin to DB25 adapters were supplied. The card also had
+	  jumpers internally to toggle various pinning configurations.
+
+	  This driver can be built as a module; but then "generic_serial"
+	  will also be built as a module. This has to be loaded before
+	  "ser_a2232". If you want to do this, answer M here.
+
+config WHIPPET_SERIAL
+	tristate "Hisoft Whippet PCMCIA serial support"
+	depends on AMIGA_PCMCIA
+	help
+	  HiSoft has a web page at <http://www.hisoft.co.uk/>, but there
+	  is no listing for the Whippet in their Amiga section.
+
+config APNE
+	tristate "PCMCIA NE2000 support"
+	depends on AMIGA_PCMCIA
+	help
+	  If you have a PCMCIA NE2000 compatible adapter, say Y.  Otherwise,
+	  say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called apne.
+
+config SERIAL_CONSOLE
+	bool "Support for serial port console"
+	depends on APUS && (AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y)
+
+config HEARTBEAT
+	bool "Use power LED as a heartbeat"
+	depends on APUS
+	help
+	  Use the power-on LED on your machine as a load meter.  The exact
+	  behavior is platform-dependent, but normally the flash frequency is
+	  a hyperbolic function of the 5-minute load average.
+
+config PROC_HARDWARE
+	bool "/proc/hardware support"
+	depends on APUS
+
+source "drivers/zorro/Kconfig"
+
+config PCI_PERMEDIA
+	bool "PCI for Permedia2"
+	depends on !4xx && !8xx && APUS
diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile
new file mode 100644
index 000000000000..55e094b96bc0
--- /dev/null
+++ b/arch/powerpc/platforms/cell/Makefile
@@ -0,0 +1,2 @@
+obj-y			+= interrupt.o iommu.o setup.o spider-pic.o
+obj-$(CONFIG_SMP)	+= smp.o
diff --git a/arch/ppc64/kernel/bpa_iic.c b/arch/powerpc/platforms/cell/interrupt.c
index 0aaa878e19d3..7fbe78a9327d 100644
--- a/arch/ppc64/kernel/bpa_iic.c
+++ b/arch/powerpc/platforms/cell/interrupt.c
@@ -1,5 +1,5 @@
 /*
- * BPA Internal Interrupt Controller
+ * Cell Internal Interrupt Controller
  *
  * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
  *
@@ -31,7 +31,7 @@
 #include <asm/prom.h>
 #include <asm/ptrace.h>
 
-#include "bpa_iic.h"
+#include "interrupt.h"
 
 struct iic_pending_bits {
 	u32 data;
@@ -89,7 +89,7 @@ static void iic_end(unsigned int irq)
 }
 
 static struct hw_interrupt_type iic_pic = {
-	.typename = " BPA-IIC  ",
+	.typename = " CELL-IIC ",
 	.startup = iic_startup,
 	.enable = iic_enable,
 	.disable = iic_disable,
@@ -106,7 +106,7 @@ static int iic_external_get_irq(struct iic_pending_bits pending)
 	irq = -1;
 
 	/*
-	 * This mapping is specific to the Broadband
+	 * This mapping is specific to the Cell Broadband
 	 * Engine. We might need to get the numbers
 	 * from the device tree to support future CPUs.
 	 */
diff --git a/arch/ppc64/kernel/bpa_iic.h b/arch/powerpc/platforms/cell/interrupt.h
index 6833c3022166..37d58e6fd0c6 100644
--- a/arch/ppc64/kernel/bpa_iic.h
+++ b/arch/powerpc/platforms/cell/interrupt.h
@@ -1,5 +1,5 @@
-#ifndef ASM_BPA_IIC_H
-#define ASM_BPA_IIC_H
+#ifndef ASM_CELL_PIC_H
+#define ASM_CELL_PIC_H
 #ifdef __KERNEL__
 /*
  * Mapping of IIC pending bits into per-node
@@ -21,7 +21,7 @@
  *    + node number
  *    * don't care
  *
- * A node consists of a Broadband Engine and an optional
+ * A node consists of a Cell Broadband Engine and an optional
  * south bridge device providing a maximum of 64 IRQs.
  * The south bridge may be connected to either IOIF0
  * or IOIF1.
@@ -59,4 +59,4 @@ extern void spider_init_IRQ(void);
 extern int spider_get_irq(unsigned long int_pending);
 
 #endif
-#endif /* ASM_BPA_IIC_H */
+#endif /* ASM_CELL_PIC_H */
diff --git a/arch/ppc64/kernel/bpa_iommu.c b/arch/powerpc/platforms/cell/iommu.c
index f33a7bccb0d7..74f999b4ac9e 100644
--- a/arch/ppc64/kernel/bpa_iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -1,5 +1,5 @@
 /*
- * IOMMU implementation for Broadband Processor Architecture
+ * IOMMU implementation for Cell Broadband Processor Architecture
  * We just establish a linear mapping at boot by setting all the
  * IOPT cache entries in the CPU.
  * The mapping functions should be identical to pci_direct_iommu, 
@@ -39,9 +39,9 @@
 #include <asm/pmac_feature.h>
 #include <asm/abs_addr.h>
 #include <asm/system.h>
+#include <asm/ppc-pci.h>
 
-#include "pci.h"
-#include "bpa_iommu.h"
+#include "iommu.h"
 
 static inline unsigned long 
 get_iopt_entry(unsigned long real_address, unsigned long ioid,
@@ -99,7 +99,11 @@ get_iost_entry(unsigned long iopt_base, unsigned long io_address, unsigned page_
 		break;
 
 	default: /* not a known compile time constant */
-		BUILD_BUG_ON(1);
+		{
+			/* BUILD_BUG_ON() is not usable here */
+			extern void __get_iost_entry_bad_page_size(void);
+			__get_iost_entry_bad_page_size();
+		}
 		break;
 	}
 
@@ -272,7 +276,7 @@ static void iommu_dev_setup_null(struct pci_dev *d) { }
  * for each DMA window used by any device. For now, we
  * happen to know that there is only one DMA window in use,
  * starting at iopt_phys_offset. */
-static void bpa_map_iommu(void)
+static void cell_map_iommu(void)
 {
 	unsigned long address;
 	void __iomem *base;
@@ -305,73 +309,73 @@ static void bpa_map_iommu(void)
 }
 
 
-static void *bpa_alloc_coherent(struct device *hwdev, size_t size,
-			   dma_addr_t *dma_handle, unsigned int __nocast flag)
+static void *cell_alloc_coherent(struct device *hwdev, size_t size,
+			   dma_addr_t *dma_handle, gfp_t flag)
 {
 	void *ret;
 
 	ret = (void *)__get_free_pages(flag, get_order(size));
 	if (ret != NULL) {
 		memset(ret, 0, size);
-		*dma_handle = virt_to_abs(ret) | BPA_DMA_VALID;
+		*dma_handle = virt_to_abs(ret) | CELL_DMA_VALID;
 	}
 	return ret;
 }
 
-static void bpa_free_coherent(struct device *hwdev, size_t size,
+static void cell_free_coherent(struct device *hwdev, size_t size,
 				 void *vaddr, dma_addr_t dma_handle)
 {
 	free_pages((unsigned long)vaddr, get_order(size));
 }
 
-static dma_addr_t bpa_map_single(struct device *hwdev, void *ptr,
+static dma_addr_t cell_map_single(struct device *hwdev, void *ptr,
 		size_t size, enum dma_data_direction direction)
 {
-	return virt_to_abs(ptr) | BPA_DMA_VALID;
+	return virt_to_abs(ptr) | CELL_DMA_VALID;
 }
 
-static void bpa_unmap_single(struct device *hwdev, dma_addr_t dma_addr,
+static void cell_unmap_single(struct device *hwdev, dma_addr_t dma_addr,
 		size_t size, enum dma_data_direction direction)
 {
 }
 
-static int bpa_map_sg(struct device *hwdev, struct scatterlist *sg,
+static int cell_map_sg(struct device *hwdev, struct scatterlist *sg,
 		int nents, enum dma_data_direction direction)
 {
 	int i;
 
 	for (i = 0; i < nents; i++, sg++) {
 		sg->dma_address = (page_to_phys(sg->page) + sg->offset)
-					| BPA_DMA_VALID;
+					| CELL_DMA_VALID;
 		sg->dma_length = sg->length;
 	}
 
 	return nents;
 }
 
-static void bpa_unmap_sg(struct device *hwdev, struct scatterlist *sg,
+static void cell_unmap_sg(struct device *hwdev, struct scatterlist *sg,
 		int nents, enum dma_data_direction direction)
 {
 }
 
-static int bpa_dma_supported(struct device *dev, u64 mask)
+static int cell_dma_supported(struct device *dev, u64 mask)
 {
 	return mask < 0x100000000ull;
 }
 
-void bpa_init_iommu(void)
+void cell_init_iommu(void)
 {
-	bpa_map_iommu();
+	cell_map_iommu();
 
 	/* Direct I/O, IOMMU off */
 	ppc_md.iommu_dev_setup = iommu_dev_setup_null;
 	ppc_md.iommu_bus_setup = iommu_bus_setup_null;
 
-	pci_dma_ops.alloc_coherent = bpa_alloc_coherent;
-	pci_dma_ops.free_coherent = bpa_free_coherent;
-	pci_dma_ops.map_single = bpa_map_single;
-	pci_dma_ops.unmap_single = bpa_unmap_single;
-	pci_dma_ops.map_sg = bpa_map_sg;
-	pci_dma_ops.unmap_sg = bpa_unmap_sg;
-	pci_dma_ops.dma_supported = bpa_dma_supported;
+	pci_dma_ops.alloc_coherent = cell_alloc_coherent;
+	pci_dma_ops.free_coherent = cell_free_coherent;
+	pci_dma_ops.map_single = cell_map_single;
+	pci_dma_ops.unmap_single = cell_unmap_single;
+	pci_dma_ops.map_sg = cell_map_sg;
+	pci_dma_ops.unmap_sg = cell_unmap_sg;
+	pci_dma_ops.dma_supported = cell_dma_supported;
 }
diff --git a/arch/ppc64/kernel/bpa_iommu.h b/arch/powerpc/platforms/cell/iommu.h
index e547d77dfa04..490d77abfe85 100644
--- a/arch/ppc64/kernel/bpa_iommu.h
+++ b/arch/powerpc/platforms/cell/iommu.h
@@ -1,5 +1,5 @@
-#ifndef BPA_IOMMU_H
-#define BPA_IOMMU_H
+#ifndef CELL_IOMMU_H
+#define CELL_IOMMU_H
 
 /* some constants */
 enum {
@@ -55,11 +55,11 @@ enum {
 
 	/* The high bit needs to be set on every DMA address,
 	   only 2GB are addressable */
-	BPA_DMA_VALID	  = 0x80000000,
-	BPA_DMA_MASK	  = 0x7fffffff,
+	CELL_DMA_VALID	  = 0x80000000,
+	CELL_DMA_MASK	  = 0x7fffffff,
 };
 
 
-void bpa_init_iommu(void);
+void cell_init_iommu(void);
 
 #endif
diff --git a/arch/ppc64/kernel/bpa_setup.c b/arch/powerpc/platforms/cell/setup.c
index 57b3db66f458..9a495634d0c2 100644
--- a/arch/ppc64/kernel/bpa_setup.c
+++ b/arch/powerpc/platforms/cell/setup.c
@@ -1,11 +1,11 @@
 /*
- *  linux/arch/ppc/kernel/bpa_setup.c
+ *  linux/arch/powerpc/platforms/cell/cell_setup.c
  *
  *  Copyright (C) 1995  Linus Torvalds
  *  Adapted from 'alpha' version by Gary Thomas
  *  Modified by Cort Dougan (cort@cs.nmt.edu)
  *  Modified by PPC64 Team, IBM Corp
- *  Modified by BPA Team, IBM Deutschland Entwicklung GmbH
+ *  Modified by Cell Team, IBM Deutschland Entwicklung GmbH
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -43,10 +43,11 @@
 #include <asm/time.h>
 #include <asm/nvram.h>
 #include <asm/cputable.h>
+#include <asm/ppc-pci.h>
+#include <asm/irq.h>
 
-#include "pci.h"
-#include "bpa_iic.h"
-#include "bpa_iommu.h"
+#include "interrupt.h"
+#include "iommu.h"
 
 #ifdef DEBUG
 #define DBG(fmt...) udbg_printf(fmt)
@@ -54,7 +55,7 @@
 #define DBG(fmt...)
 #endif
 
-void bpa_get_cpuinfo(struct seq_file *m)
+void cell_show_cpuinfo(struct seq_file *m)
 {
 	struct device_node *root;
 	const char *model = "";
@@ -62,22 +63,22 @@ void bpa_get_cpuinfo(struct seq_file *m)
 	root = of_find_node_by_path("/");
 	if (root)
 		model = get_property(root, "model", NULL);
-	seq_printf(m, "machine\t\t: BPA %s\n", model);
+	seq_printf(m, "machine\t\t: CHRP %s\n", model);
 	of_node_put(root);
 }
 
-static void bpa_progress(char *s, unsigned short hex)
+static void cell_progress(char *s, unsigned short hex)
 {
 	printk("*** %04x : %s\n", hex, s ? s : "");
 }
 
-static void __init bpa_setup_arch(void)
+static void __init cell_setup_arch(void)
 {
 	ppc_md.init_IRQ       = iic_init_IRQ;
 	ppc_md.get_irq        = iic_get_irq;
 
 #ifdef CONFIG_SMP
-	smp_init_pSeries();
+	smp_init_cell();
 #endif
 
 	/* init to some ~sane value until calibrate_delay() runs */
@@ -96,39 +97,39 @@ static void __init bpa_setup_arch(void)
 	conswitchp = &dummy_con;
 #endif
 
-	bpa_nvram_init();
+	mmio_nvram_init();
 }
 
 /*
  * Early initialization.  Relocation is on but do not reference unbolted pages
  */
-static void __init bpa_init_early(void)
+static void __init cell_init_early(void)
 {
-	DBG(" -> bpa_init_early()\n");
+	DBG(" -> cell_init_early()\n");
 
 	hpte_init_native();
 
-	bpa_init_iommu();
+	cell_init_iommu();
 
-	ppc64_interrupt_controller = IC_BPA_IIC;
+	ppc64_interrupt_controller = IC_CELL_PIC;
 
-	DBG(" <- bpa_init_early()\n");
+	DBG(" <- cell_init_early()\n");
 }
 
 
-static int __init bpa_probe(int platform)
+static int __init cell_probe(int platform)
 {
-	if (platform != PLATFORM_BPA)
+	if (platform != PLATFORM_CELL)
 		return 0;
 
 	return 1;
 }
 
-struct machdep_calls __initdata bpa_md = {
-	.probe			= bpa_probe,
-	.setup_arch		= bpa_setup_arch,
-	.init_early		= bpa_init_early,
-	.get_cpuinfo		= bpa_get_cpuinfo,
+struct machdep_calls __initdata cell_md = {
+	.probe			= cell_probe,
+	.setup_arch		= cell_setup_arch,
+	.init_early		= cell_init_early,
+	.show_cpuinfo		= cell_show_cpuinfo,
 	.restart		= rtas_restart,
 	.power_off		= rtas_power_off,
 	.halt			= rtas_halt,
@@ -136,5 +137,5 @@ struct machdep_calls __initdata bpa_md = {
 	.get_rtc_time		= rtas_get_rtc_time,
 	.set_rtc_time		= rtas_set_rtc_time,
 	.calibrate_decr		= generic_calibrate_decr,
-	.progress		= bpa_progress,
+	.progress		= cell_progress,
 };
diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c
new file mode 100644
index 000000000000..de96eadf419d
--- /dev/null
+++ b/arch/powerpc/platforms/cell/smp.c
@@ -0,0 +1,230 @@
+/*
+ * SMP support for BPA machines.
+ *
+ * Dave Engebretsen, Peter Bergner, and
+ * Mike Corrigan {engebret|bergner|mikec}@us.ibm.com
+ *
+ * Plus various changes from other IBM teams...
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#undef DEBUG
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/cache.h>
+#include <linux/err.h>
+#include <linux/sysdev.h>
+#include <linux/cpu.h>
+
+#include <asm/ptrace.h>
+#include <asm/atomic.h>
+#include <asm/irq.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/smp.h>
+#include <asm/paca.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/cputable.h>
+#include <asm/firmware.h>
+#include <asm/system.h>
+#include <asm/rtas.h>
+
+#include "interrupt.h"
+
+#ifdef DEBUG
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+/*
+ * The primary thread of each non-boot processor is recorded here before
+ * smp init.
+ */
+static cpumask_t of_spin_map;
+
+extern void pSeries_secondary_smp_init(unsigned long);
+
+/**
+ * smp_startup_cpu() - start the given cpu
+ *
+ * At boot time, there is nothing to do for primary threads which were
+ * started from Open Firmware.  For anything else, call RTAS with the
+ * appropriate start location.
+ *
+ * Returns:
+ *	0	- failure
+ *	1	- success
+ */
+static inline int __devinit smp_startup_cpu(unsigned int lcpu)
+{
+	int status;
+	unsigned long start_here = __pa((u32)*((unsigned long *)
+					       pSeries_secondary_smp_init));
+	unsigned int pcpu;
+	int start_cpu;
+
+	if (cpu_isset(lcpu, of_spin_map))
+		/* Already started by OF and sitting in spin loop */
+		return 1;
+
+	pcpu = get_hard_smp_processor_id(lcpu);
+
+	/* Fixup atomic count: it exited inside IRQ handler. */
+	paca[lcpu].__current->thread_info->preempt_count	= 0;
+
+	/*
+	 * If the RTAS start-cpu token does not exist then presume the
+	 * cpu is already spinning.
+	 */
+	start_cpu = rtas_token("start-cpu");
+	if (start_cpu == RTAS_UNKNOWN_SERVICE)
+		return 1;
+
+	status = rtas_call(start_cpu, 3, 1, NULL, pcpu, start_here, lcpu);
+	if (status != 0) {
+		printk(KERN_ERR "start-cpu failed: %i\n", status);
+		return 0;
+	}
+
+	return 1;
+}
+
+static void smp_iic_message_pass(int target, int msg)
+{
+	unsigned int i;
+
+	if (target < NR_CPUS) {
+		iic_cause_IPI(target, msg);
+	} else {
+		for_each_online_cpu(i) {
+			if (target == MSG_ALL_BUT_SELF
+			    && i == smp_processor_id())
+				continue;
+			iic_cause_IPI(i, msg);
+		}
+	}
+}
+
+static int __init smp_iic_probe(void)
+{
+	iic_request_IPIs();
+
+	return cpus_weight(cpu_possible_map);
+}
+
+static void __devinit smp_iic_setup_cpu(int cpu)
+{
+	if (cpu != boot_cpuid)
+		iic_setup_cpu();
+}
+
+static DEFINE_SPINLOCK(timebase_lock);
+static unsigned long timebase = 0;
+
+static void __devinit cell_give_timebase(void)
+{
+	spin_lock(&timebase_lock);
+	rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
+	timebase = get_tb();
+	spin_unlock(&timebase_lock);
+
+	while (timebase)
+		barrier();
+	rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
+}
+
+static void __devinit cell_take_timebase(void)
+{
+	while (!timebase)
+		barrier();
+	spin_lock(&timebase_lock);
+	set_tb(timebase >> 32, timebase & 0xffffffff);
+	timebase = 0;
+	spin_unlock(&timebase_lock);
+}
+
+static void __devinit smp_cell_kick_cpu(int nr)
+{
+	BUG_ON(nr < 0 || nr >= NR_CPUS);
+
+	if (!smp_startup_cpu(nr))
+		return;
+
+	/*
+	 * The processor is currently spinning, waiting for the
+	 * cpu_start field to become non-zero After we set cpu_start,
+	 * the processor will continue on to secondary_start
+	 */
+	paca[nr].cpu_start = 1;
+}
+
+static int smp_cell_cpu_bootable(unsigned int nr)
+{
+	/* Special case - we inhibit secondary thread startup
+	 * during boot if the user requests it.  Odd-numbered
+	 * cpus are assumed to be secondary threads.
+	 */
+	if (system_state < SYSTEM_RUNNING &&
+	    cpu_has_feature(CPU_FTR_SMT) &&
+	    !smt_enabled_at_boot && nr % 2 != 0)
+		return 0;
+
+	return 1;
+}
+static struct smp_ops_t bpa_iic_smp_ops = {
+	.message_pass	= smp_iic_message_pass,
+	.probe		= smp_iic_probe,
+	.kick_cpu	= smp_cell_kick_cpu,
+	.setup_cpu	= smp_iic_setup_cpu,
+	.cpu_bootable	= smp_cell_cpu_bootable,
+};
+
+/* This is called very early */
+void __init smp_init_cell(void)
+{
+	int i;
+
+	DBG(" -> smp_init_cell()\n");
+
+	smp_ops = &bpa_iic_smp_ops;
+
+	/* Mark threads which are still spinning in hold loops. */
+	if (cpu_has_feature(CPU_FTR_SMT)) {
+		for_each_present_cpu(i) {
+			if (i % 2 == 0)
+				/*
+				 * Even-numbered logical cpus correspond to
+				 * primary threads.
+				 */
+				cpu_set(i, of_spin_map);
+		}
+	} else {
+		of_spin_map = cpu_present_map;
+	}
+
+	cpu_clear(boot_cpuid, of_spin_map);
+
+	/* Non-lpar has additional take/give timebase */
+	if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
+		smp_ops->give_timebase = cell_give_timebase;
+		smp_ops->take_timebase = cell_take_timebase;
+	}
+
+	DBG(" <- smp_init_cell()\n");
+}
diff --git a/arch/ppc64/kernel/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c
index d5c9a02fb119..e74132188bdf 100644
--- a/arch/ppc64/kernel/spider-pic.c
+++ b/arch/powerpc/platforms/cell/spider-pic.c
@@ -27,7 +27,7 @@
 #include <asm/prom.h>
 #include <asm/io.h>
 
-#include "bpa_iic.h"
+#include "interrupt.h"
 
 /* register layout taken from Spider spec, table 7.4-4 */
 enum {
diff --git a/arch/powerpc/platforms/chrp/Makefile b/arch/powerpc/platforms/chrp/Makefile
new file mode 100644
index 000000000000..902feb1ac431
--- /dev/null
+++ b/arch/powerpc/platforms/chrp/Makefile
@@ -0,0 +1,4 @@
+obj-y				+= setup.o time.o pegasos_eth.o
+obj-$(CONFIG_PCI)		+= pci.o
+obj-$(CONFIG_SMP)		+= smp.o
+obj-$(CONFIG_NVRAM)		+= nvram.o
diff --git a/arch/powerpc/platforms/chrp/chrp.h b/arch/powerpc/platforms/chrp/chrp.h
new file mode 100644
index 000000000000..3a2057fa314a
--- /dev/null
+++ b/arch/powerpc/platforms/chrp/chrp.h
@@ -0,0 +1,12 @@
+/*
+ * Declarations of CHRP platform-specific things.
+ */
+
+extern void chrp_nvram_init(void);
+extern void chrp_get_rtc_time(struct rtc_time *);
+extern int chrp_set_rtc_time(struct rtc_time *);
+extern void chrp_calibrate_decr(void);
+extern long chrp_time_init(void);
+
+extern void chrp_find_bridges(void);
+extern void chrp_event_scan(void);
diff --git a/arch/powerpc/platforms/chrp/nvram.c b/arch/powerpc/platforms/chrp/nvram.c
new file mode 100644
index 000000000000..150f67d6f90c
--- /dev/null
+++ b/arch/powerpc/platforms/chrp/nvram.c
@@ -0,0 +1,89 @@
+/*
+ *  c 2001 PPC 64 Team, IBM Corp
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ *
+ * /dev/nvram driver for PPC
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <asm/uaccess.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/rtas.h>
+#include "chrp.h"
+
+static unsigned int nvram_size;
+static unsigned char nvram_buf[4];
+static DEFINE_SPINLOCK(nvram_lock);
+
+static unsigned char chrp_nvram_read(int addr)
+{
+	unsigned int done;
+	unsigned long flags;
+	unsigned char ret;
+
+	if (addr >= nvram_size) {
+		printk(KERN_DEBUG "%s: read addr %d > nvram_size %u\n",
+		       current->comm, addr, nvram_size);
+		return 0xff;
+	}
+	spin_lock_irqsave(&nvram_lock, flags);
+	if ((rtas_call(rtas_token("nvram-fetch"), 3, 2, &done, addr,
+		       __pa(nvram_buf), 1) != 0) || 1 != done)
+		ret = 0xff;
+	else
+		ret = nvram_buf[0];
+	spin_unlock_irqrestore(&nvram_lock, flags);
+
+	return ret;
+}
+
+static void chrp_nvram_write(int addr, unsigned char val)
+{
+	unsigned int done;
+	unsigned long flags;
+
+	if (addr >= nvram_size) {
+		printk(KERN_DEBUG "%s: write addr %d > nvram_size %u\n",
+		       current->comm, addr, nvram_size);
+		return;
+	}
+	spin_lock_irqsave(&nvram_lock, flags);
+	nvram_buf[0] = val;
+	if ((rtas_call(rtas_token("nvram-store"), 3, 2, &done, addr,
+		       __pa(nvram_buf), 1) != 0) || 1 != done)
+		printk(KERN_DEBUG "rtas IO error storing 0x%02x at %d", val, addr);
+	spin_unlock_irqrestore(&nvram_lock, flags);
+}
+
+void __init chrp_nvram_init(void)
+{
+	struct device_node *nvram;
+	unsigned int *nbytes_p, proplen;
+
+	nvram = of_find_node_by_type(NULL, "nvram");
+	if (nvram == NULL)
+		return;
+
+	nbytes_p = (unsigned int *)get_property(nvram, "#bytes", &proplen);
+	if (nbytes_p == NULL || proplen != sizeof(unsigned int))
+		return;
+
+	nvram_size = *nbytes_p;
+
+	printk(KERN_INFO "CHRP nvram contains %u bytes\n", nvram_size);
+	of_node_put(nvram);
+
+	ppc_md.nvram_read_val = chrp_nvram_read;
+	ppc_md.nvram_write_val = chrp_nvram_write;
+
+	return;
+}
diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c
new file mode 100644
index 000000000000..82c429d487f3
--- /dev/null
+++ b/arch/powerpc/platforms/chrp/pci.c
@@ -0,0 +1,310 @@
+/*
+ * CHRP pci routines.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/ide.h>
+
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/irq.h>
+#include <asm/hydra.h>
+#include <asm/prom.h>
+#include <asm/gg2.h>
+#include <asm/machdep.h>
+#include <asm/sections.h>
+#include <asm/pci-bridge.h>
+#include <asm/open_pic.h>
+#include <asm/grackle.h>
+#include <asm/rtas.h>
+
+/* LongTrail */
+void __iomem *gg2_pci_config_base;
+
+/*
+ * The VLSI Golden Gate II has only 512K of PCI configuration space, so we
+ * limit the bus number to 3 bits
+ */
+
+int gg2_read_config(struct pci_bus *bus, unsigned int devfn, int off,
+			   int len, u32 *val)
+{
+	volatile void __iomem *cfg_data;
+	struct pci_controller *hose = bus->sysdata;
+
+	if (bus->number > 7)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	/*
+	 * Note: the caller has already checked that off is
+	 * suitably aligned and that len is 1, 2 or 4.
+	 */
+	cfg_data = hose->cfg_data + ((bus->number<<16) | (devfn<<8) | off);
+	switch (len) {
+	case 1:
+		*val =  in_8(cfg_data);
+		break;
+	case 2:
+		*val = in_le16(cfg_data);
+		break;
+	default:
+		*val = in_le32(cfg_data);
+		break;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+int gg2_write_config(struct pci_bus *bus, unsigned int devfn, int off,
+			    int len, u32 val)
+{
+	volatile void __iomem *cfg_data;
+	struct pci_controller *hose = bus->sysdata;
+
+	if (bus->number > 7)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	/*
+	 * Note: the caller has already checked that off is
+	 * suitably aligned and that len is 1, 2 or 4.
+	 */
+	cfg_data = hose->cfg_data + ((bus->number<<16) | (devfn<<8) | off);
+	switch (len) {
+	case 1:
+		out_8(cfg_data, val);
+		break;
+	case 2:
+		out_le16(cfg_data, val);
+		break;
+	default:
+		out_le32(cfg_data, val);
+		break;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops gg2_pci_ops =
+{
+	gg2_read_config,
+	gg2_write_config
+};
+
+/*
+ * Access functions for PCI config space using RTAS calls.
+ */
+int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		     int len, u32 *val)
+{
+	struct pci_controller *hose = bus->sysdata;
+	unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
+		| (((bus->number - hose->first_busno) & 0xff) << 16)
+		| (hose->index << 24);
+        int ret = -1;
+	int rval;
+
+	rval = rtas_call(rtas_token("read-pci-config"), 2, 2, &ret, addr, len);
+	*val = ret;
+	return rval? PCIBIOS_DEVICE_NOT_FOUND: PCIBIOS_SUCCESSFUL;
+}
+
+int rtas_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		      int len, u32 val)
+{
+	struct pci_controller *hose = bus->sysdata;
+	unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
+		| (((bus->number - hose->first_busno) & 0xff) << 16)
+		| (hose->index << 24);
+	int rval;
+
+	rval = rtas_call(rtas_token("write-pci-config"), 3, 1, NULL,
+			 addr, len, val);
+	return rval? PCIBIOS_DEVICE_NOT_FOUND: PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops rtas_pci_ops =
+{
+	rtas_read_config,
+	rtas_write_config
+};
+
+volatile struct Hydra __iomem *Hydra = NULL;
+
+int __init
+hydra_init(void)
+{
+	struct device_node *np;
+
+	np = find_devices("mac-io");
+	if (np == NULL || np->n_addrs == 0)
+		return 0;
+	Hydra = ioremap(np->addrs[0].address, np->addrs[0].size);
+	printk("Hydra Mac I/O at %lx\n", np->addrs[0].address);
+	printk("Hydra Feature_Control was %x",
+	       in_le32(&Hydra->Feature_Control));
+	out_le32(&Hydra->Feature_Control, (HYDRA_FC_SCC_CELL_EN |
+					   HYDRA_FC_SCSI_CELL_EN |
+					   HYDRA_FC_SCCA_ENABLE |
+					   HYDRA_FC_SCCB_ENABLE |
+					   HYDRA_FC_ARB_BYPASS |
+					   HYDRA_FC_MPIC_ENABLE |
+					   HYDRA_FC_SLOW_SCC_PCLK |
+					   HYDRA_FC_MPIC_IS_MASTER));
+	printk(", now %x\n", in_le32(&Hydra->Feature_Control));
+	return 1;
+}
+
+void __init
+chrp_pcibios_fixup(void)
+{
+	struct pci_dev *dev = NULL;
+	struct device_node *np;
+
+	/* PCI interrupts are controlled by the OpenPIC */
+	for_each_pci_dev(dev) {
+		np = pci_device_to_OF_node(dev);
+		if ((np != 0) && (np->n_intrs > 0) && (np->intrs[0].line != 0))
+			dev->irq = np->intrs[0].line;
+		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+	}
+}
+
+#define PRG_CL_RESET_VALID 0x00010000
+
+static void __init
+setup_python(struct pci_controller *hose, struct device_node *dev)
+{
+	u32 __iomem *reg;
+	u32 val;
+	unsigned long addr = dev->addrs[0].address;
+
+	setup_indirect_pci(hose, addr + 0xf8000, addr + 0xf8010);
+
+	/* Clear the magic go-slow bit */
+	reg = ioremap(dev->addrs[0].address + 0xf6000, 0x40);
+	val = in_be32(&reg[12]);
+	if (val & PRG_CL_RESET_VALID) {
+		out_be32(&reg[12], val & ~PRG_CL_RESET_VALID);
+		in_be32(&reg[12]);
+	}
+	iounmap(reg);
+}
+
+/* Marvell Discovery II based Pegasos 2 */
+static void __init setup_peg2(struct pci_controller *hose, struct device_node *dev)
+{
+	struct device_node *root = find_path_device("/");
+	struct device_node *rtas;
+
+	rtas = of_find_node_by_name (root, "rtas");
+	if (rtas) {
+		hose->ops = &rtas_pci_ops;
+	} else {
+		printk ("RTAS supporting Pegasos OF not found, please upgrade"
+			" your firmware\n");
+	}
+	pci_assign_all_buses = 1;
+}
+
+void __init
+chrp_find_bridges(void)
+{
+	struct device_node *dev;
+	int *bus_range;
+	int len, index = -1;
+	struct pci_controller *hose;
+	unsigned int *dma;
+	char *model, *machine;
+	int is_longtrail = 0, is_mot = 0, is_pegasos = 0;
+	struct device_node *root = find_path_device("/");
+
+	/*
+	 * The PCI host bridge nodes on some machines don't have
+	 * properties to adequately identify them, so we have to
+	 * look at what sort of machine this is as well.
+	 */
+	machine = get_property(root, "model", NULL);
+	if (machine != NULL) {
+		is_longtrail = strncmp(machine, "IBM,LongTrail", 13) == 0;
+		is_mot = strncmp(machine, "MOT", 3) == 0;
+		if (strncmp(machine, "Pegasos2", 8) == 0)
+			is_pegasos = 2;
+		else if (strncmp(machine, "Pegasos", 7) == 0)
+			is_pegasos = 1;
+	}
+	for (dev = root->child; dev != NULL; dev = dev->sibling) {
+		if (dev->type == NULL || strcmp(dev->type, "pci") != 0)
+			continue;
+		++index;
+		/* The GG2 bridge on the LongTrail doesn't have an address */
+		if (dev->n_addrs < 1 && !is_longtrail) {
+			printk(KERN_WARNING "Can't use %s: no address\n",
+			       dev->full_name);
+			continue;
+		}
+		bus_range = (int *) get_property(dev, "bus-range", &len);
+		if (bus_range == NULL || len < 2 * sizeof(int)) {
+			printk(KERN_WARNING "Can't get bus-range for %s\n",
+				dev->full_name);
+			continue;
+		}
+		if (bus_range[1] == bus_range[0])
+			printk(KERN_INFO "PCI bus %d", bus_range[0]);
+		else
+			printk(KERN_INFO "PCI buses %d..%d",
+			       bus_range[0], bus_range[1]);
+		printk(" controlled by %s", dev->type);
+		if (dev->n_addrs > 0)
+			printk(" at %lx", dev->addrs[0].address);
+		printk("\n");
+
+		hose = pcibios_alloc_controller();
+		if (!hose) {
+			printk("Can't allocate PCI controller structure for %s\n",
+				dev->full_name);
+			continue;
+		}
+		hose->arch_data = dev;
+		hose->first_busno = bus_range[0];
+		hose->last_busno = bus_range[1];
+
+		model = get_property(dev, "model", NULL);
+		if (model == NULL)
+			model = "<none>";
+		if (device_is_compatible(dev, "IBM,python")) {
+			setup_python(hose, dev);
+		} else if (is_mot
+			   || strncmp(model, "Motorola, Grackle", 17) == 0) {
+			setup_grackle(hose);
+		} else if (is_longtrail) {
+			void __iomem *p = ioremap(GG2_PCI_CONFIG_BASE, 0x80000);
+			hose->ops = &gg2_pci_ops;
+			hose->cfg_data = p;
+			gg2_pci_config_base = p;
+		} else if (is_pegasos == 1) {
+			setup_indirect_pci(hose, 0xfec00cf8, 0xfee00cfc);
+		} else if (is_pegasos == 2) {
+			setup_peg2(hose, dev);
+		} else {
+			printk("No methods for %s (model %s), using RTAS\n",
+			       dev->full_name, model);
+			hose->ops = &rtas_pci_ops;
+		}
+
+		pci_process_bridge_OF_ranges(hose, dev, index == 0);
+
+		/* check the first bridge for a property that we can
+		   use to set pci_dram_offset */
+		dma = (unsigned int *)
+			get_property(dev, "ibm,dma-ranges", &len);
+		if (index == 0 && dma != NULL && len >= 6 * sizeof(*dma)) {
+			pci_dram_offset = dma[2] - dma[3];
+			printk("pci_dram_offset = %lx\n", pci_dram_offset);
+		}
+	}
+
+	/* Do not fixup interrupts from OF tree on pegasos */
+	if (is_pegasos == 0)
+		ppc_md.pcibios_fixup = chrp_pcibios_fixup;
+}
diff --git a/arch/powerpc/platforms/chrp/pegasos_eth.c b/arch/powerpc/platforms/chrp/pegasos_eth.c
new file mode 100644
index 000000000000..29c86781c493
--- /dev/null
+++ b/arch/powerpc/platforms/chrp/pegasos_eth.c
@@ -0,0 +1,214 @@
+/*
+ *  arch/ppc/platforms/chrp_pegasos_eth.c
+ *
+ *  Copyright (C) 2005 Sven Luther <sl@bplan-gmbh.de>
+ *  Thanks to :
+ *	Dale Farnsworth <dale@farnsworth.org>
+ *	Mark A. Greer <mgreer@mvista.com>
+ *	Nicolas DET <nd@bplan-gmbh.de>
+ *	Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ *  And anyone else who helped me on this.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mv643xx.h>
+#include <linux/pci.h>
+
+#define PEGASOS2_MARVELL_REGBASE 		(0xf1000000)
+#define PEGASOS2_MARVELL_REGSIZE 		(0x00004000)
+#define PEGASOS2_SRAM_BASE 			(0xf2000000)
+#define PEGASOS2_SRAM_SIZE			(256*1024)
+
+#define PEGASOS2_SRAM_BASE_ETH0			(PEGASOS2_SRAM_BASE)
+#define PEGASOS2_SRAM_BASE_ETH1			(PEGASOS2_SRAM_BASE_ETH0 + (PEGASOS2_SRAM_SIZE / 2) )
+
+
+#define PEGASOS2_SRAM_RXRING_SIZE		(PEGASOS2_SRAM_SIZE/4)
+#define PEGASOS2_SRAM_TXRING_SIZE		(PEGASOS2_SRAM_SIZE/4)
+
+#undef BE_VERBOSE
+
+static struct resource mv643xx_eth_shared_resources[] = {
+	[0] = {
+		.name	= "ethernet shared base",
+		.start	= 0xf1000000 + MV643XX_ETH_SHARED_REGS,
+		.end	= 0xf1000000 + MV643XX_ETH_SHARED_REGS +
+					MV643XX_ETH_SHARED_REGS_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device mv643xx_eth_shared_device = {
+	.name		= MV643XX_ETH_SHARED_NAME,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(mv643xx_eth_shared_resources),
+	.resource	= mv643xx_eth_shared_resources,
+};
+
+static struct resource mv643xx_eth0_resources[] = {
+	[0] = {
+		.name	= "eth0 irq",
+		.start	= 9,
+		.end	= 9,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+
+static struct mv643xx_eth_platform_data eth0_pd = {
+	.tx_sram_addr = PEGASOS2_SRAM_BASE_ETH0,
+	.tx_sram_size = PEGASOS2_SRAM_TXRING_SIZE,
+	.tx_queue_size = PEGASOS2_SRAM_TXRING_SIZE/16,
+
+	.rx_sram_addr = PEGASOS2_SRAM_BASE_ETH0 + PEGASOS2_SRAM_TXRING_SIZE,
+	.rx_sram_size = PEGASOS2_SRAM_RXRING_SIZE,
+	.rx_queue_size = PEGASOS2_SRAM_RXRING_SIZE/16,
+};
+
+static struct platform_device eth0_device = {
+	.name		= MV643XX_ETH_NAME,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(mv643xx_eth0_resources),
+	.resource	= mv643xx_eth0_resources,
+	.dev = {
+		.platform_data = &eth0_pd,
+	},
+};
+
+static struct resource mv643xx_eth1_resources[] = {
+	[0] = {
+		.name	= "eth1 irq",
+		.start	= 9,
+		.end	= 9,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv643xx_eth_platform_data eth1_pd = {
+	.tx_sram_addr = PEGASOS2_SRAM_BASE_ETH1,
+	.tx_sram_size = PEGASOS2_SRAM_TXRING_SIZE,
+	.tx_queue_size = PEGASOS2_SRAM_TXRING_SIZE/16,
+
+	.rx_sram_addr = PEGASOS2_SRAM_BASE_ETH1 + PEGASOS2_SRAM_TXRING_SIZE,
+	.rx_sram_size = PEGASOS2_SRAM_RXRING_SIZE,
+	.rx_queue_size = PEGASOS2_SRAM_RXRING_SIZE/16,
+};
+
+static struct platform_device eth1_device = {
+	.name		= MV643XX_ETH_NAME,
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(mv643xx_eth1_resources),
+	.resource	= mv643xx_eth1_resources,
+	.dev = {
+		.platform_data = &eth1_pd,
+	},
+};
+
+static struct platform_device *mv643xx_eth_pd_devs[] __initdata = {
+	&mv643xx_eth_shared_device,
+	&eth0_device,
+	&eth1_device,
+};
+
+/***********/
+/***********/
+#define MV_READ(offset,val) 	{ val = readl(mv643xx_reg_base + offset); }
+#define MV_WRITE(offset,data) writel(data, mv643xx_reg_base + offset)
+
+static void __iomem *mv643xx_reg_base;
+
+static int Enable_SRAM(void)
+{
+	u32 ALong;
+
+	if (mv643xx_reg_base == NULL)
+		mv643xx_reg_base = ioremap(PEGASOS2_MARVELL_REGBASE,
+					PEGASOS2_MARVELL_REGSIZE);
+
+	if (mv643xx_reg_base == NULL)
+		return -ENOMEM;
+
+#ifdef BE_VERBOSE
+	printk("Pegasos II/Marvell MV64361: register remapped from %p to %p\n",
+		(void *)PEGASOS2_MARVELL_REGBASE, (void *)mv643xx_reg_base);
+#endif
+
+	MV_WRITE(MV64340_SRAM_CONFIG, 0);
+
+	MV_WRITE(MV64340_INTEGRATED_SRAM_BASE_ADDR, PEGASOS2_SRAM_BASE >> 16);
+
+	MV_READ(MV64340_BASE_ADDR_ENABLE, ALong);
+	ALong &= ~(1 << 19);
+	MV_WRITE(MV64340_BASE_ADDR_ENABLE, ALong);
+
+	ALong = 0x02;
+	ALong |= PEGASOS2_SRAM_BASE & 0xffff0000;
+	MV_WRITE(MV643XX_ETH_BAR_4, ALong);
+
+	MV_WRITE(MV643XX_ETH_SIZE_REG_4, (PEGASOS2_SRAM_SIZE-1) & 0xffff0000);
+
+	MV_READ(MV643XX_ETH_BASE_ADDR_ENABLE_REG, ALong);
+	ALong &= ~(1 << 4);
+	MV_WRITE(MV643XX_ETH_BASE_ADDR_ENABLE_REG, ALong);
+
+#ifdef BE_VERBOSE
+	printk("Pegasos II/Marvell MV64361: register unmapped\n");
+	printk("Pegasos II/Marvell MV64361: SRAM at %p, size=%x\n", (void*) PEGASOS2_SRAM_BASE, PEGASOS2_SRAM_SIZE);
+#endif
+
+	iounmap(mv643xx_reg_base);
+	mv643xx_reg_base = NULL;
+
+	return 1;
+}
+
+
+/***********/
+/***********/
+int mv643xx_eth_add_pds(void)
+{
+	int ret = 0;
+	static struct pci_device_id pci_marvell_mv64360[] = {
+		{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_MV64360) },
+		{ }
+	};
+
+#ifdef BE_VERBOSE
+	printk("Pegasos II/Marvell MV64361: init\n");
+#endif
+
+	if (pci_dev_present(pci_marvell_mv64360)) {
+		ret = platform_add_devices(mv643xx_eth_pd_devs,
+				ARRAY_SIZE(mv643xx_eth_pd_devs));
+
+		if ( Enable_SRAM() < 0)
+		{
+			eth0_pd.tx_sram_addr = 0;
+			eth0_pd.tx_sram_size = 0;
+			eth0_pd.rx_sram_addr = 0;
+			eth0_pd.rx_sram_size = 0;
+
+			eth1_pd.tx_sram_addr = 0;
+			eth1_pd.tx_sram_size = 0;
+			eth1_pd.rx_sram_addr = 0;
+			eth1_pd.rx_sram_size = 0;
+
+#ifdef BE_VERBOSE
+			printk("Pegasos II/Marvell MV64361: Can't enable the "
+				"SRAM\n");
+#endif
+		}
+	}
+
+#ifdef BE_VERBOSE
+	printk("Pegasos II/Marvell MV64361: init is over\n");
+#endif
+
+	return ret;
+}
+
+device_initcall(mv643xx_eth_add_pds);
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
new file mode 100644
index 000000000000..dda5f2c72c25
--- /dev/null
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -0,0 +1,533 @@
+/*
+ *  arch/ppc/platforms/setup.c
+ *
+ *  Copyright (C) 1995  Linus Torvalds
+ *  Adapted from 'alpha' version by Gary Thomas
+ *  Modified by Cort Dougan (cort@cs.nmt.edu)
+ */
+
+/*
+ * bootup setup stuff..
+ */
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/a.out.h>
+#include <linux/tty.h>
+#include <linux/major.h>
+#include <linux/interrupt.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/version.h>
+#include <linux/adb.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/ide.h>
+#include <linux/console.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/initrd.h>
+#include <linux/module.h>
+
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/prom.h>
+#include <asm/gg2.h>
+#include <asm/pci-bridge.h>
+#include <asm/dma.h>
+#include <asm/machdep.h>
+#include <asm/irq.h>
+#include <asm/hydra.h>
+#include <asm/sections.h>
+#include <asm/time.h>
+#include <asm/btext.h>
+#include <asm/i8259.h>
+#include <asm/mpic.h>
+#include <asm/rtas.h>
+#include <asm/xmon.h>
+
+#include "chrp.h"
+
+void rtas_indicator_progress(char *, unsigned short);
+void btext_progress(char *, unsigned short);
+
+int _chrp_type;
+EXPORT_SYMBOL(_chrp_type);
+
+struct mpic *chrp_mpic;
+
+/*
+ * XXX this should be in xmon.h, but putting it there means xmon.h
+ * has to include <linux/interrupt.h> (to get irqreturn_t), which
+ * causes all sorts of problems.  -- paulus
+ */
+extern irqreturn_t xmon_irq(int, void *, struct pt_regs *);
+
+extern unsigned long loops_per_jiffy;
+
+#ifdef CONFIG_SMP
+extern struct smp_ops_t chrp_smp_ops;
+#endif
+
+static const char *gg2_memtypes[4] = {
+	"FPM", "SDRAM", "EDO", "BEDO"
+};
+static const char *gg2_cachesizes[4] = {
+	"256 KB", "512 KB", "1 MB", "Reserved"
+};
+static const char *gg2_cachetypes[4] = {
+	"Asynchronous", "Reserved", "Flow-Through Synchronous",
+	"Pipelined Synchronous"
+};
+static const char *gg2_cachemodes[4] = {
+	"Disabled", "Write-Through", "Copy-Back", "Transparent Mode"
+};
+
+void chrp_show_cpuinfo(struct seq_file *m)
+{
+	int i, sdramen;
+	unsigned int t;
+	struct device_node *root;
+	const char *model = "";
+
+	root = find_path_device("/");
+	if (root)
+		model = get_property(root, "model", NULL);
+	seq_printf(m, "machine\t\t: CHRP %s\n", model);
+
+	/* longtrail (goldengate) stuff */
+	if (!strncmp(model, "IBM,LongTrail", 13)) {
+		/* VLSI VAS96011/12 `Golden Gate 2' */
+		/* Memory banks */
+		sdramen = (in_le32(gg2_pci_config_base + GG2_PCI_DRAM_CTRL)
+			   >>31) & 1;
+		for (i = 0; i < (sdramen ? 4 : 6); i++) {
+			t = in_le32(gg2_pci_config_base+
+						 GG2_PCI_DRAM_BANK0+
+						 i*4);
+			if (!(t & 1))
+				continue;
+			switch ((t>>8) & 0x1f) {
+			case 0x1f:
+				model = "4 MB";
+				break;
+			case 0x1e:
+				model = "8 MB";
+				break;
+			case 0x1c:
+				model = "16 MB";
+				break;
+			case 0x18:
+				model = "32 MB";
+				break;
+			case 0x10:
+				model = "64 MB";
+				break;
+			case 0x00:
+				model = "128 MB";
+				break;
+			default:
+				model = "Reserved";
+				break;
+			}
+			seq_printf(m, "memory bank %d\t: %s %s\n", i, model,
+				   gg2_memtypes[sdramen ? 1 : ((t>>1) & 3)]);
+		}
+		/* L2 cache */
+		t = in_le32(gg2_pci_config_base+GG2_PCI_CC_CTRL);
+		seq_printf(m, "board l2\t: %s %s (%s)\n",
+			   gg2_cachesizes[(t>>7) & 3],
+			   gg2_cachetypes[(t>>2) & 3],
+			   gg2_cachemodes[t & 3]);
+	}
+}
+
+/*
+ *  Fixes for the National Semiconductor PC78308VUL SuperI/O
+ *
+ *  Some versions of Open Firmware incorrectly initialize the IRQ settings
+ *  for keyboard and mouse
+ */
+static inline void __init sio_write(u8 val, u8 index)
+{
+	outb(index, 0x15c);
+	outb(val, 0x15d);
+}
+
+static inline u8 __init sio_read(u8 index)
+{
+	outb(index, 0x15c);
+	return inb(0x15d);
+}
+
+static void __init sio_fixup_irq(const char *name, u8 device, u8 level,
+				     u8 type)
+{
+	u8 level0, type0, active;
+
+	/* select logical device */
+	sio_write(device, 0x07);
+	active = sio_read(0x30);
+	level0 = sio_read(0x70);
+	type0 = sio_read(0x71);
+	if (level0 != level || type0 != type || !active) {
+		printk(KERN_WARNING "sio: %s irq level %d, type %d, %sactive: "
+		       "remapping to level %d, type %d, active\n",
+		       name, level0, type0, !active ? "in" : "", level, type);
+		sio_write(0x01, 0x30);
+		sio_write(level, 0x70);
+		sio_write(type, 0x71);
+	}
+}
+
+static void __init sio_init(void)
+{
+	struct device_node *root;
+
+	if ((root = find_path_device("/")) &&
+	    !strncmp(get_property(root, "model", NULL), "IBM,LongTrail", 13)) {
+		/* logical device 0 (KBC/Keyboard) */
+		sio_fixup_irq("keyboard", 0, 1, 2);
+		/* select logical device 1 (KBC/Mouse) */
+		sio_fixup_irq("mouse", 1, 12, 2);
+	}
+}
+
+
+static void __init pegasos_set_l2cr(void)
+{
+	struct device_node *np;
+
+	/* On Pegasos, enable the l2 cache if needed, as the OF forgets it */
+	if (_chrp_type != _CHRP_Pegasos)
+		return;
+
+	/* Enable L2 cache if needed */
+	np = find_type_devices("cpu");
+	if (np != NULL) {
+		unsigned int *l2cr = (unsigned int *)
+			get_property (np, "l2cr", NULL);
+		if (l2cr == NULL) {
+			printk ("Pegasos l2cr : no cpu l2cr property found\n");
+			return;
+		}
+		if (!((*l2cr) & 0x80000000)) {
+			printk ("Pegasos l2cr : L2 cache was not active, "
+				"activating\n");
+			_set_L2CR(0);
+			_set_L2CR((*l2cr) | 0x80000000);
+		}
+	}
+}
+
+void __init chrp_setup_arch(void)
+{
+	struct device_node *root = find_path_device ("/");
+	char *machine = NULL;
+	struct device_node *device;
+	unsigned int *p = NULL;
+
+	/* init to some ~sane value until calibrate_delay() runs */
+	loops_per_jiffy = 50000000/HZ;
+
+	if (root)
+		machine = get_property(root, "model", NULL);
+	if (machine && strncmp(machine, "Pegasos", 7) == 0) {
+		_chrp_type = _CHRP_Pegasos;
+	} else if (machine && strncmp(machine, "IBM", 3) == 0) {
+		_chrp_type = _CHRP_IBM;
+	} else if (machine && strncmp(machine, "MOT", 3) == 0) {
+		_chrp_type = _CHRP_Motorola;
+	} else {
+		/* Let's assume it is an IBM chrp if all else fails */
+		_chrp_type = _CHRP_IBM;
+	}
+	printk("chrp type = %x\n", _chrp_type);
+
+	rtas_initialize();
+	if (rtas_token("display-character") >= 0)
+		ppc_md.progress = rtas_progress;
+
+	/* use RTAS time-of-day routines if available */
+	if (rtas_token("get-time-of-day") != RTAS_UNKNOWN_SERVICE) {
+		ppc_md.get_boot_time	= rtas_get_boot_time;
+		ppc_md.get_rtc_time	= rtas_get_rtc_time;
+		ppc_md.set_rtc_time	= rtas_set_rtc_time;
+	}
+
+#ifdef CONFIG_BOOTX_TEXT
+	if (ppc_md.progress == NULL && boot_text_mapped)
+		ppc_md.progress = btext_progress;
+#endif
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	/* this is fine for chrp */
+	initrd_below_start_ok = 1;
+
+	if (initrd_start)
+		ROOT_DEV = Root_RAM0;
+	else
+#endif
+		ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */
+
+	/* On pegasos, enable the L2 cache if not already done by OF */
+	pegasos_set_l2cr();
+
+	/* Lookup PCI host bridges */
+	chrp_find_bridges();
+
+	/*
+	 *  Temporary fixes for PCI devices.
+	 *  -- Geert
+	 */
+	hydra_init();		/* Mac I/O */
+
+	/*
+	 *  Fix the Super I/O configuration
+	 */
+	sio_init();
+
+	/* Get the event scan rate for the rtas so we know how
+	 * often it expects a heartbeat. -- Cort
+	 */
+	device = find_devices("rtas");
+	if (device)
+		p = (unsigned int *) get_property
+			(device, "rtas-event-scan-rate", NULL);
+	if (p && *p) {
+		ppc_md.heartbeat = chrp_event_scan;
+		ppc_md.heartbeat_reset = HZ / (*p * 30) - 1;
+		ppc_md.heartbeat_count = 1;
+		printk("RTAS Event Scan Rate: %u (%lu jiffies)\n",
+		       *p, ppc_md.heartbeat_reset);
+	}
+
+	pci_create_OF_bus_map();
+
+	/*
+	 * Print the banner, then scroll down so boot progress
+	 * can be printed.  -- Cort
+	 */
+	if (ppc_md.progress) ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0x0);
+}
+
+void
+chrp_event_scan(void)
+{
+	unsigned char log[1024];
+	int ret = 0;
+
+	/* XXX: we should loop until the hardware says no more error logs -- Cort */
+	rtas_call(rtas_token("event-scan"), 4, 1, &ret, 0xffffffff, 0,
+		  __pa(log), 1024);
+	ppc_md.heartbeat_count = ppc_md.heartbeat_reset;
+}
+
+/*
+ * Finds the open-pic node and sets up the mpic driver.
+ */
+static void __init chrp_find_openpic(void)
+{
+	struct device_node *np, *root;
+	int len, i, j, irq_count;
+	int isu_size, idu_size;
+	unsigned int *iranges, *opprop = NULL;
+	int oplen = 0;
+	unsigned long opaddr;
+	int na = 1;
+	unsigned char init_senses[NR_IRQS - NUM_8259_INTERRUPTS];
+
+	np = find_type_devices("open-pic");
+	if (np == NULL)
+		return;
+	root = find_path_device("/");
+	if (root) {
+		opprop = (unsigned int *) get_property
+			(root, "platform-open-pic", &oplen);
+		na = prom_n_addr_cells(root);
+	}
+	if (opprop && oplen >= na * sizeof(unsigned int)) {
+		opaddr = opprop[na-1];	/* assume 32-bit */
+		oplen /= na * sizeof(unsigned int);
+	} else {
+		if (np->n_addrs == 0)
+			return;
+		opaddr = np->addrs[0].address;
+		oplen = 0;
+	}
+
+	printk(KERN_INFO "OpenPIC at %lx\n", opaddr);
+
+	irq_count = NR_IRQS - NUM_ISA_INTERRUPTS - 4; /* leave room for IPIs */
+	prom_get_irq_senses(init_senses, NUM_ISA_INTERRUPTS, NR_IRQS - 4);
+	/* i8259 cascade is always positive level */
+	init_senses[0] = IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE;
+
+	iranges = (unsigned int *) get_property(np, "interrupt-ranges", &len);
+	if (iranges == NULL)
+		len = 0;	/* non-distributed mpic */
+	else
+		len /= 2 * sizeof(unsigned int);
+
+	/*
+	 * The first pair of cells in interrupt-ranges refers to the
+	 * IDU; subsequent pairs refer to the ISUs.
+	 */
+	if (oplen < len) {
+		printk(KERN_ERR "Insufficient addresses for distributed"
+		       " OpenPIC (%d < %d)\n", np->n_addrs, len);
+		len = oplen;
+	}
+
+	isu_size = 0;
+	idu_size = 0;
+	if (len > 0 && iranges[1] != 0) {
+		printk(KERN_INFO "OpenPIC irqs %d..%d in IDU\n",
+		       iranges[0], iranges[0] + iranges[1] - 1);
+		idu_size = iranges[1];
+	}
+	if (len > 1)
+		isu_size = iranges[3];
+
+	chrp_mpic = mpic_alloc(opaddr, MPIC_PRIMARY,
+			       isu_size, NUM_ISA_INTERRUPTS, irq_count,
+			       NR_IRQS - 4, init_senses, irq_count,
+			       " MPIC    ");
+	if (chrp_mpic == NULL) {
+		printk(KERN_ERR "Failed to allocate MPIC structure\n");
+		return;
+	}
+
+	j = na - 1;
+	for (i = 1; i < len; ++i) {
+		iranges += 2;
+		j += na;
+		printk(KERN_INFO "OpenPIC irqs %d..%d in ISU at %x\n",
+		       iranges[0], iranges[0] + iranges[1] - 1,
+		       opprop[j]);
+		mpic_assign_isu(chrp_mpic, i - 1, opprop[j]);
+	}
+
+	mpic_init(chrp_mpic);
+	mpic_setup_cascade(NUM_ISA_INTERRUPTS, i8259_irq_cascade, NULL);
+}
+
+#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
+static struct irqaction xmon_irqaction = {
+	.handler = xmon_irq,
+	.mask = CPU_MASK_NONE,
+	.name = "XMON break",
+};
+#endif
+
+void __init chrp_init_IRQ(void)
+{
+	struct device_node *np;
+	unsigned long chrp_int_ack = 0;
+#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
+	struct device_node *kbd;
+#endif
+
+	for (np = find_devices("pci"); np != NULL; np = np->next) {
+		unsigned int *addrp = (unsigned int *)
+			get_property(np, "8259-interrupt-acknowledge", NULL);
+
+		if (addrp == NULL)
+			continue;
+		chrp_int_ack = addrp[prom_n_addr_cells(np)-1];
+		break;
+	}
+	if (np == NULL)
+		printk(KERN_ERR "Cannot find PCI interrupt acknowledge address\n");
+
+	chrp_find_openpic();
+
+	i8259_init(chrp_int_ack, 0);
+
+	if (_chrp_type == _CHRP_Pegasos)
+		ppc_md.get_irq        = i8259_irq;
+	else
+		ppc_md.get_irq        = mpic_get_irq;
+
+#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
+	/* see if there is a keyboard in the device tree
+	   with a parent of type "adb" */
+	for (kbd = find_devices("keyboard"); kbd; kbd = kbd->next)
+		if (kbd->parent && kbd->parent->type
+		    && strcmp(kbd->parent->type, "adb") == 0)
+			break;
+	if (kbd)
+		setup_irq(HYDRA_INT_ADB_NMI, &xmon_irqaction);
+#endif
+}
+
+void __init
+chrp_init2(void)
+{
+#ifdef CONFIG_NVRAM
+	chrp_nvram_init();
+#endif
+
+	request_region(0x20,0x20,"pic1");
+	request_region(0xa0,0x20,"pic2");
+	request_region(0x00,0x20,"dma1");
+	request_region(0x40,0x20,"timer");
+	request_region(0x80,0x10,"dma page reg");
+	request_region(0xc0,0x20,"dma2");
+
+	if (ppc_md.progress)
+		ppc_md.progress("  Have fun!    ", 0x7777);
+}
+
+void __init chrp_init(void)
+{
+	ISA_DMA_THRESHOLD = ~0L;
+	DMA_MODE_READ = 0x44;
+	DMA_MODE_WRITE = 0x48;
+	isa_io_base = CHRP_ISA_IO_BASE;		/* default value */
+	ppc_do_canonicalize_irqs = 1;
+
+	/* Assume we have an 8259... */
+	__irq_offset_value = NUM_ISA_INTERRUPTS;
+
+	ppc_md.setup_arch     = chrp_setup_arch;
+	ppc_md.show_cpuinfo   = chrp_show_cpuinfo;
+
+	ppc_md.init_IRQ       = chrp_init_IRQ;
+	ppc_md.init           = chrp_init2;
+
+	ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot;
+
+	ppc_md.restart        = rtas_restart;
+	ppc_md.power_off      = rtas_power_off;
+	ppc_md.halt           = rtas_halt;
+
+	ppc_md.time_init      = chrp_time_init;
+	ppc_md.calibrate_decr = chrp_calibrate_decr;
+
+	/* this may get overridden with rtas routines later... */
+	ppc_md.set_rtc_time   = chrp_set_rtc_time;
+	ppc_md.get_rtc_time   = chrp_get_rtc_time;
+
+#ifdef CONFIG_SMP
+	smp_ops = &chrp_smp_ops;
+#endif /* CONFIG_SMP */
+}
+
+#ifdef CONFIG_BOOTX_TEXT
+void
+btext_progress(char *s, unsigned short hex)
+{
+	btext_drawstring(s);
+	btext_drawstring("\n");
+}
+#endif /* CONFIG_BOOTX_TEXT */
diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c
new file mode 100644
index 000000000000..b616053bc331
--- /dev/null
+++ b/arch/powerpc/platforms/chrp/smp.c
@@ -0,0 +1,86 @@
+/*
+ * Smp support for CHRP machines.
+ *
+ * Written by Cort Dougan (cort@cs.nmt.edu) borrowing a great
+ * deal of code from the sparc and intel versions.
+ *
+ * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+
+#include <asm/ptrace.h>
+#include <asm/atomic.h>
+#include <asm/irq.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/smp.h>
+#include <asm/residual.h>
+#include <asm/time.h>
+#include <asm/open_pic.h>
+#include <asm/machdep.h>
+#include <asm/smp.h>
+#include <asm/mpic.h>
+#include <asm/rtas.h>
+
+static void __devinit smp_chrp_kick_cpu(int nr)
+{
+	*(unsigned long *)KERNELBASE = nr;
+	asm volatile("dcbf 0,%0"::"r"(KERNELBASE):"memory");
+}
+
+static void __devinit smp_chrp_setup_cpu(int cpu_nr)
+{
+	mpic_setup_this_cpu();
+}
+
+static DEFINE_SPINLOCK(timebase_lock);
+static unsigned int timebase_upper = 0, timebase_lower = 0;
+
+void __devinit smp_chrp_give_timebase(void)
+{
+	spin_lock(&timebase_lock);
+	rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
+	timebase_upper = get_tbu();
+	timebase_lower = get_tbl();
+	spin_unlock(&timebase_lock);
+
+	while (timebase_upper || timebase_lower)
+		barrier();
+	rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
+}
+
+void __devinit smp_chrp_take_timebase(void)
+{
+	while (!(timebase_upper || timebase_lower))
+		barrier();
+	spin_lock(&timebase_lock);
+	set_tb(timebase_upper, timebase_lower);
+	timebase_upper = 0;
+	timebase_lower = 0;
+	spin_unlock(&timebase_lock);
+	printk("CPU %i taken timebase\n", smp_processor_id());
+}
+
+/* CHRP with openpic */
+struct smp_ops_t chrp_smp_ops = {
+	.message_pass = smp_mpic_message_pass,
+	.probe = smp_mpic_probe,
+	.kick_cpu = smp_chrp_kick_cpu,
+	.setup_cpu = smp_chrp_setup_cpu,
+	.give_timebase = smp_chrp_give_timebase,
+	.take_timebase = smp_chrp_take_timebase,
+};
diff --git a/arch/powerpc/platforms/chrp/time.c b/arch/powerpc/platforms/chrp/time.c
new file mode 100644
index 000000000000..737ee5d9f0aa
--- /dev/null
+++ b/arch/powerpc/platforms/chrp/time.c
@@ -0,0 +1,187 @@
+/*
+ *  arch/ppc/platforms/chrp_time.c
+ *
+ *  Copyright (C) 1991, 1992, 1995  Linus Torvalds
+ *
+ * Adapted for PowerPC (PReP) by Gary Thomas
+ * Modified by Cort Dougan (cort@cs.nmt.edu).
+ * Copied and modified from arch/i386/kernel/time.c
+ *
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <linux/kernel_stat.h>
+#include <linux/mc146818rtc.h>
+#include <linux/init.h>
+#include <linux/bcd.h>
+
+#include <asm/io.h>
+#include <asm/nvram.h>
+#include <asm/prom.h>
+#include <asm/sections.h>
+#include <asm/time.h>
+
+extern spinlock_t rtc_lock;
+
+static int nvram_as1 = NVRAM_AS1;
+static int nvram_as0 = NVRAM_AS0;
+static int nvram_data = NVRAM_DATA;
+
+long __init chrp_time_init(void)
+{
+	struct device_node *rtcs;
+	int base;
+
+	rtcs = find_compatible_devices("rtc", "pnpPNP,b00");
+	if (rtcs == NULL)
+		rtcs = find_compatible_devices("rtc", "ds1385-rtc");
+	if (rtcs == NULL || rtcs->addrs == NULL)
+		return 0;
+	base = rtcs->addrs[0].address;
+	nvram_as1 = 0;
+	nvram_as0 = base;
+	nvram_data = base + 1;
+
+	return 0;
+}
+
+int chrp_cmos_clock_read(int addr)
+{
+	if (nvram_as1 != 0)
+		outb(addr>>8, nvram_as1);
+	outb(addr, nvram_as0);
+	return (inb(nvram_data));
+}
+
+void chrp_cmos_clock_write(unsigned long val, int addr)
+{
+	if (nvram_as1 != 0)
+		outb(addr>>8, nvram_as1);
+	outb(addr, nvram_as0);
+	outb(val, nvram_data);
+	return;
+}
+
+/*
+ * Set the hardware clock. -- Cort
+ */
+int chrp_set_rtc_time(struct rtc_time *tmarg)
+{
+	unsigned char save_control, save_freq_select;
+	struct rtc_time tm = *tmarg;
+
+	spin_lock(&rtc_lock);
+
+	save_control = chrp_cmos_clock_read(RTC_CONTROL); /* tell the clock it's being set */
+
+	chrp_cmos_clock_write((save_control|RTC_SET), RTC_CONTROL);
+
+	save_freq_select = chrp_cmos_clock_read(RTC_FREQ_SELECT); /* stop and reset prescaler */
+
+	chrp_cmos_clock_write((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
+
+	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+		BIN_TO_BCD(tm.tm_sec);
+		BIN_TO_BCD(tm.tm_min);
+		BIN_TO_BCD(tm.tm_hour);
+		BIN_TO_BCD(tm.tm_mon);
+		BIN_TO_BCD(tm.tm_mday);
+		BIN_TO_BCD(tm.tm_year);
+	}
+	chrp_cmos_clock_write(tm.tm_sec,RTC_SECONDS);
+	chrp_cmos_clock_write(tm.tm_min,RTC_MINUTES);
+	chrp_cmos_clock_write(tm.tm_hour,RTC_HOURS);
+	chrp_cmos_clock_write(tm.tm_mon,RTC_MONTH);
+	chrp_cmos_clock_write(tm.tm_mday,RTC_DAY_OF_MONTH);
+	chrp_cmos_clock_write(tm.tm_year,RTC_YEAR);
+
+	/* The following flags have to be released exactly in this order,
+	 * otherwise the DS12887 (popular MC146818A clone with integrated
+	 * battery and quartz) will not reset the oscillator and will not
+	 * update precisely 500 ms later. You won't find this mentioned in
+	 * the Dallas Semiconductor data sheets, but who believes data
+	 * sheets anyway ...                           -- Markus Kuhn
+	 */
+	chrp_cmos_clock_write(save_control, RTC_CONTROL);
+	chrp_cmos_clock_write(save_freq_select, RTC_FREQ_SELECT);
+
+	spin_unlock(&rtc_lock);
+	return 0;
+}
+
+void chrp_get_rtc_time(struct rtc_time *tm)
+{
+	unsigned int year, mon, day, hour, min, sec;
+	int uip, i;
+
+	/* The Linux interpretation of the CMOS clock register contents:
+	 * When the Update-In-Progress (UIP) flag goes from 1 to 0, the
+	 * RTC registers show the second which has precisely just started.
+	 * Let's hope other operating systems interpret the RTC the same way.
+	 */
+
+	/* Since the UIP flag is set for about 2.2 ms and the clock
+	 * is typically written with a precision of 1 jiffy, trying
+	 * to obtain a precision better than a few milliseconds is
+	 * an illusion. Only consistency is interesting, this also
+	 * allows to use the routine for /dev/rtc without a potential
+	 * 1 second kernel busy loop triggered by any reader of /dev/rtc.
+	 */
+
+	for ( i = 0; i<1000000; i++) {
+		uip = chrp_cmos_clock_read(RTC_FREQ_SELECT);
+		sec = chrp_cmos_clock_read(RTC_SECONDS);
+		min = chrp_cmos_clock_read(RTC_MINUTES);
+		hour = chrp_cmos_clock_read(RTC_HOURS);
+		day = chrp_cmos_clock_read(RTC_DAY_OF_MONTH);
+		mon = chrp_cmos_clock_read(RTC_MONTH);
+		year = chrp_cmos_clock_read(RTC_YEAR);
+		uip |= chrp_cmos_clock_read(RTC_FREQ_SELECT);
+		if ((uip & RTC_UIP)==0) break;
+	}
+
+	if (!(chrp_cmos_clock_read(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+		BCD_TO_BIN(sec);
+		BCD_TO_BIN(min);
+		BCD_TO_BIN(hour);
+		BCD_TO_BIN(day);
+		BCD_TO_BIN(mon);
+		BCD_TO_BIN(year);
+	}
+	if (year < 70)
+		year += 100;
+	tm->tm_sec = sec;
+	tm->tm_min = min;
+	tm->tm_hour = hour;
+	tm->tm_mday = day;
+	tm->tm_mon = mon;
+	tm->tm_year = year;
+}
+
+
+void __init chrp_calibrate_decr(void)
+{
+	struct device_node *cpu;
+	unsigned int freq, *fp;
+
+	/*
+	 * The cpu node should have a timebase-frequency property
+	 * to tell us the rate at which the decrementer counts.
+	 */
+	freq = 16666000;		/* hardcoded default */
+	cpu = find_type_devices("cpu");
+	if (cpu != 0) {
+		fp = (unsigned int *)
+			get_property(cpu, "timebase-frequency", NULL);
+		if (fp != 0)
+			freq = *fp;
+	}
+	ppc_tb_freq = freq;
+}
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
new file mode 100644
index 000000000000..81250090f98d
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -0,0 +1,318 @@
+choice
+	prompt "Machine Type"
+	depends on EMBEDDED6xx
+
+config KATANA
+	bool "Artesyn-Katana"
+	help
+	  Select KATANA if configuring an Artesyn KATANA 750i or 3750
+	  cPCI board.
+
+config WILLOW
+	bool "Cogent-Willow"
+
+config CPCI690
+	bool "Force-CPCI690"
+	help
+	  Select CPCI690 if configuring a Force CPCI690 cPCI board.
+
+config POWERPMC250
+	bool "Force-PowerPMC250"
+
+config CHESTNUT
+	bool "IBM 750FX Eval board or 750GX Eval board"
+	help
+	  Select CHESTNUT if configuring an IBM 750FX Eval Board or a
+	  IBM 750GX Eval board.
+
+config SPRUCE
+	bool "IBM-Spruce"
+	select PPC_INDIRECT_PCI
+
+config HDPU
+	bool "Sky-HDPU"
+	help
+	  Select HDPU if configuring a Sky Computers Compute Blade.
+
+config HDPU_FEATURES
+	depends HDPU
+	tristate "HDPU-Features"
+	help
+	  Select to enable HDPU enhanced features.
+
+config EV64260
+	bool "Marvell-EV64260BP"
+	help
+	  Select EV64260 if configuring a Marvell (formerly Galileo)
+	  EV64260BP Evaluation platform.
+
+config LOPEC
+	bool "Motorola-LoPEC"
+	select PPC_I8259
+
+config MVME5100
+	bool "Motorola-MVME5100"
+	select PPC_INDIRECT_PCI
+
+config PPLUS
+	bool "Motorola-PowerPlus"
+	select PPC_I8259
+	select PPC_INDIRECT_PCI
+
+config PRPMC750
+	bool "Motorola-PrPMC750"
+	select PPC_INDIRECT_PCI
+
+config PRPMC800
+	bool "Motorola-PrPMC800"
+	select PPC_INDIRECT_PCI
+
+config SANDPOINT
+	bool "Motorola-Sandpoint"
+	select PPC_I8259
+	help
+	  Select SANDPOINT if configuring for a Motorola Sandpoint X3
+	  (any flavor).
+
+config RADSTONE_PPC7D
+	bool "Radstone Technology PPC7D board"
+	select PPC_I8259
+
+config PAL4
+	bool "SBS-Palomar4"
+
+config GEMINI
+	bool "Synergy-Gemini"
+	select PPC_INDIRECT_PCI
+	depends on BROKEN
+	help
+	  Select Gemini if configuring for a Synergy Microsystems' Gemini
+	  series Single Board Computer.  More information is available at:
+	  <http://www.synergymicro.com/PressRel/97_10_15.html>.
+
+config EST8260
+	bool "EST8260"
+	---help---
+	  The EST8260 is a single-board computer manufactured by Wind River
+	  Systems, Inc. (formerly Embedded Support Tools Corp.) and based on
+	  the MPC8260.  Wind River Systems has a website at
+	  <http://www.windriver.com/>, but the EST8260 cannot be found on it
+	  and has probably been discontinued or rebadged.
+
+config SBC82xx
+	bool "SBC82xx"
+	---help---
+	  SBC PowerQUICC II, single-board computer with MPC82xx CPU
+	  Manufacturer: Wind River Systems, Inc.
+	  Date of Release: May 2003
+	  End of Life: -
+	  URL: <http://www.windriver.com/>
+
+config SBS8260
+	bool "SBS8260"
+
+config RPX8260
+	bool "RPXSUPER"
+
+config TQM8260
+	bool "TQM8260"
+	---help---
+	  MPC8260 based module, little larger than credit card,
+	  up to 128 MB global + 64 MB local RAM, 32 MB Flash,
+	  32 kB EEPROM, 256 kB L@ Cache, 10baseT + 100baseT Ethernet,
+	  2 x serial ports, ...
+	  Manufacturer: TQ Components, www.tq-group.de
+	  Date of Release: June 2001
+	  End of Life: not yet :-)
+	  URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf>
+
+config ADS8272
+	bool "ADS8272"
+
+config PQ2FADS
+	bool "Freescale-PQ2FADS"
+	help
+	  Select PQ2FADS if you wish to configure for a Freescale
+	  PQ2FADS board (-VR or -ZU).
+
+config LITE5200
+	bool "Freescale LITE5200 / (IceCube)"
+	select PPC_MPC52xx
+	help
+	  Support for the LITE5200 dev board for the MPC5200 from Freescale.
+	  This is for the LITE5200 version 2.0 board. Don't know if it changes
+	  much but it's only been tested on this board version. I think this
+	  board is also known as IceCube.
+
+config MPC834x_SYS
+	bool "Freescale MPC834x SYS"
+	help
+	  This option enables support for the MPC 834x SYS evaluation board.
+
+	  Be aware that PCI buses can only function when SYS board is plugged
+	  into the PIB (Platform IO Board) board from Freescale which provide
+	  3 PCI slots.  The PIBs PCI initialization is the bootloader's
+	  responsiblilty.
+
+config EV64360
+	bool "Marvell-EV64360BP"
+	help
+	  Select EV64360 if configuring a Marvell EV64360BP Evaluation
+	  platform.
+endchoice
+
+config PQ2ADS
+	bool
+	depends on ADS8272
+	default y
+
+config TQM8xxL
+	bool
+	depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L)
+	default y
+
+config PPC_MPC52xx
+	bool
+
+config 8260
+	bool "CPM2 Support" if WILLOW
+	depends on 6xx
+	default y if TQM8260 || RPX8260 || EST8260 || SBS8260 || SBC82xx || PQ2FADS
+	help
+	  The MPC8260 is a typical embedded CPU made by Motorola.  Selecting
+	  this option means that you wish to build a kernel for a machine with
+	  an 8260 class CPU.
+
+config 8272
+	bool
+	depends on 6xx
+	default y if ADS8272
+	select 8260
+	help
+	  The MPC8272 CPM has a different internal dpram setup than other CPM2
+	  devices
+
+config 83xx
+	bool
+	default y if MPC834x_SYS
+
+config MPC834x
+	bool
+	default y if MPC834x_SYS
+
+config CPM2
+	bool
+	depends on 8260 || MPC8560 || MPC8555
+	default y
+	help
+	  The CPM2 (Communications Processor Module) is a coprocessor on
+	  embedded CPUs made by Motorola.  Selecting this option means that
+	  you wish to build a kernel for a machine with a CPM2 coprocessor
+	  on it (826x, 827x, 8560).
+
+config PPC_GEN550
+	bool
+	depends on SANDPOINT || SPRUCE || PPLUS || \
+		PRPMC750 || PRPMC800 || LOPEC || \
+		(EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \
+		83xx
+	default y
+
+config FORCE
+	bool
+	depends on 6xx && POWERPMC250
+	default y
+
+config GT64260
+	bool
+	depends on EV64260 || CPCI690
+	default y
+
+config MV64360		# Really MV64360 & MV64460
+	bool
+	depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU || EV64360
+	default y
+
+config MV64X60
+	bool
+	depends on (GT64260 || MV64360)
+	select PPC_INDIRECT_PCI
+	default y
+
+menu "Set bridge options"
+	depends on MV64X60
+
+config NOT_COHERENT_CACHE
+	bool "Turn off Cache Coherency"
+	default n
+	help
+	  Some 64x60 bridges lock up when trying to enforce cache coherency.
+	  When this option is selected, cache coherency will be turned off.
+	  Note that this can cause other problems (e.g., stale data being
+	  speculatively loaded via a cached mapping).  Use at your own risk.
+
+config MV64X60_BASE
+	hex "Set bridge base used by firmware"
+	default "0xf1000000"
+	help
+	  A firmware can leave the base address of the bridge's registers at
+	  a non-standard location.  If so, set this value to reflect the
+	  address of that non-standard location.
+
+config MV64X60_NEW_BASE
+	hex "Set bridge base used by kernel"
+	default "0xf1000000"
+	help
+	  If the current base address of the bridge's registers is not where
+	  you want it, set this value to the address that you want it moved to.
+
+endmenu
+
+config NONMONARCH_SUPPORT
+	bool "Enable Non-Monarch Support"
+	depends on PRPMC800
+
+config HARRIER
+	bool
+	depends on PRPMC800
+	default y
+
+config EPIC_SERIAL_MODE
+	bool
+	depends on 6xx && (LOPEC || SANDPOINT)
+	default y
+
+config MPC10X_BRIDGE
+	bool
+	depends on POWERPMC250 || LOPEC || SANDPOINT
+	select PPC_INDIRECT_PCI
+	default y
+
+config MPC10X_OPENPIC
+	bool
+	depends on POWERPMC250 || LOPEC || SANDPOINT
+	default y
+
+config MPC10X_STORE_GATHERING
+	bool "Enable MPC10x store gathering"
+	depends on MPC10X_BRIDGE
+
+config SANDPOINT_ENABLE_UART1
+	bool "Enable DUART mode on Sandpoint"
+	depends on SANDPOINT
+	help
+	  If this option is enabled then the MPC824x processor will run
+	  in DUART mode instead of UART mode.
+
+config HARRIER_STORE_GATHERING
+	bool "Enable Harrier store gathering"
+	depends on HARRIER
+
+config MVME5100_IPMC761_PRESENT
+	bool "MVME5100 configured with an IPMC761"
+	depends on MVME5100
+	select PPC_I8259
+
+config SPRUCE_BAUD_33M
+	bool "Spruce baud clock support"
+	depends on SPRUCE
diff --git a/arch/powerpc/platforms/iseries/Kconfig b/arch/powerpc/platforms/iseries/Kconfig
new file mode 100644
index 000000000000..3d957a30c8c2
--- /dev/null
+++ b/arch/powerpc/platforms/iseries/Kconfig
@@ -0,0 +1,31 @@
+
+menu "iSeries device drivers"
+	depends on PPC_ISERIES
+
+config VIOCONS
+	tristate "iSeries Virtual Console Support"
+
+config VIODASD
+	tristate "iSeries Virtual I/O disk support"
+	help
+	  If you are running on an iSeries system and you want to use
+ 	  virtual disks created and managed by OS/400, say Y.
+
+config VIOCD
+	tristate "iSeries Virtual I/O CD support"
+	help
+	  If you are running Linux on an IBM iSeries system and you want to
+	  read a CD drive owned by OS/400, say Y here.
+
+config VIOTAPE
+	tristate "iSeries Virtual Tape Support"
+	help
+	  If you are running Linux on an iSeries system and you want Linux
+	  to read and/or write a tape drive owned by OS/400, say Y here.
+
+endmenu
+
+config VIOPATH
+	bool
+	depends on VIOCONS || VIODASD || VIOCD || VIOTAPE || VETH
+	default y
diff --git a/arch/powerpc/platforms/iseries/Makefile b/arch/powerpc/platforms/iseries/Makefile
new file mode 100644
index 000000000000..127b465308be
--- /dev/null
+++ b/arch/powerpc/platforms/iseries/Makefile
@@ -0,0 +1,9 @@
+EXTRA_CFLAGS	+= -mno-minimal-toc
+
+obj-y += hvlog.o hvlpconfig.o lpardata.o setup.o mf.o lpevents.o \
+	hvcall.o proc.o htab.o iommu.o misc.o
+obj-$(CONFIG_PCI) += pci.o irq.o vpdinfo.o
+obj-$(CONFIG_IBMVIO) += vio.o
+obj-$(CONFIG_SMP) += smp.o
+obj-$(CONFIG_VIOPATH) += viopath.o
+obj-$(CONFIG_MODULES) += ksyms.o
diff --git a/arch/powerpc/platforms/iseries/call_hpt.h b/arch/powerpc/platforms/iseries/call_hpt.h
new file mode 100644
index 000000000000..a843b0f87b72
--- /dev/null
+++ b/arch/powerpc/platforms/iseries/call_hpt.h
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _PLATFORMS_ISERIES_CALL_HPT_H
+#define _PLATFORMS_ISERIES_CALL_HPT_H
+
+/*
+ * This file contains the "hypervisor call" interface which is used to
+ * drive the hypervisor from the OS.
+ */
+
+#include <asm/iseries/hv_call_sc.h>
+#include <asm/iseries/hv_types.h>
+#include <asm/mmu.h>
+
+#define HvCallHptGetHptAddress		HvCallHpt +  0
+#define HvCallHptGetHptPages		HvCallHpt +  1
+#define HvCallHptSetPp			HvCallHpt +  5
+#define HvCallHptSetSwBits		HvCallHpt +  6
+#define HvCallHptUpdate			HvCallHpt +  7
+#define HvCallHptInvalidateNoSyncICache	HvCallHpt +  8
+#define HvCallHptGet			HvCallHpt + 11
+#define HvCallHptFindNextValid		HvCallHpt + 12
+#define HvCallHptFindValid		HvCallHpt + 13
+#define HvCallHptAddValidate		HvCallHpt + 16
+#define HvCallHptInvalidateSetSwBitsGet HvCallHpt + 18
+
+
+static inline u64 HvCallHpt_getHptAddress(void)
+{
+	return HvCall0(HvCallHptGetHptAddress);
+}
+
+static inline u64 HvCallHpt_getHptPages(void)
+{
+	return HvCall0(HvCallHptGetHptPages);
+}
+
+static inline void HvCallHpt_setPp(u32 hpteIndex, u8 value)
+{
+	HvCall2(HvCallHptSetPp, hpteIndex, value);
+}
+
+static inline void HvCallHpt_setSwBits(u32 hpteIndex, u8 bitson, u8 bitsoff)
+{
+	HvCall3(HvCallHptSetSwBits, hpteIndex, bitson, bitsoff);
+}
+
+static inline void HvCallHpt_invalidateNoSyncICache(u32 hpteIndex)
+{
+	HvCall1(HvCallHptInvalidateNoSyncICache, hpteIndex);
+}
+
+static inline u64 HvCallHpt_invalidateSetSwBitsGet(u32 hpteIndex, u8 bitson,
+		u8 bitsoff)
+{
+	u64 compressedStatus;
+
+	compressedStatus = HvCall4(HvCallHptInvalidateSetSwBitsGet,
+			hpteIndex, bitson, bitsoff, 1);
+	HvCall1(HvCallHptInvalidateNoSyncICache, hpteIndex);
+	return compressedStatus;
+}
+
+static inline u64 HvCallHpt_findValid(hpte_t *hpte, u64 vpn)
+{
+	return HvCall3Ret16(HvCallHptFindValid, hpte, vpn, 0, 0);
+}
+
+static inline u64 HvCallHpt_findNextValid(hpte_t *hpte, u32 hpteIndex,
+		u8 bitson, u8 bitsoff)
+{
+	return HvCall3Ret16(HvCallHptFindNextValid, hpte, hpteIndex,
+			bitson, bitsoff);
+}
+
+static inline void HvCallHpt_get(hpte_t *hpte, u32 hpteIndex)
+{
+	HvCall2Ret16(HvCallHptGet, hpte, hpteIndex, 0);
+}
+
+static inline void HvCallHpt_addValidate(u32 hpteIndex, u32 hBit, hpte_t *hpte)
+{
+	HvCall4(HvCallHptAddValidate, hpteIndex, hBit, hpte->v, hpte->r);
+}
+
+#endif /* _PLATFORMS_ISERIES_CALL_HPT_H */
diff --git a/arch/powerpc/platforms/iseries/call_pci.h b/arch/powerpc/platforms/iseries/call_pci.h
new file mode 100644
index 000000000000..59d4e0ad5cf3
--- /dev/null
+++ b/arch/powerpc/platforms/iseries/call_pci.h
@@ -0,0 +1,290 @@
+/*
+ * Provides the Hypervisor PCI calls for iSeries Linux Parition.
+ * Copyright (C) 2001  <Wayne G Holm> <IBM Corporation>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the:
+ * Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330,
+ * Boston, MA  02111-1307  USA
+ *
+ * Change Activity:
+ *   Created, Jan 9, 2001
+ */
+
+#ifndef _PLATFORMS_ISERIES_CALL_PCI_H
+#define _PLATFORMS_ISERIES_CALL_PCI_H
+
+#include <asm/iseries/hv_call_sc.h>
+#include <asm/iseries/hv_types.h>
+
+/*
+ * DSA == Direct Select Address
+ * this struct must be 64 bits in total
+ */
+struct HvCallPci_DsaAddr {
+	u16		busNumber;		/* PHB index? */
+	u8		subBusNumber;		/* PCI bus number? */
+	u8		deviceId;		/* device and function? */
+	u8		barNumber;
+	u8		reserved[3];
+};
+
+union HvDsaMap {
+	u64	DsaAddr;
+	struct HvCallPci_DsaAddr Dsa;
+};
+
+struct HvCallPci_LoadReturn {
+	u64		rc;
+	u64		value;
+};
+
+enum HvCallPci_DeviceType {
+	HvCallPci_NodeDevice	= 1,
+	HvCallPci_SpDevice	= 2,
+	HvCallPci_IopDevice     = 3,
+	HvCallPci_BridgeDevice	= 4,
+	HvCallPci_MultiFunctionDevice = 5,
+	HvCallPci_IoaDevice	= 6
+};
+
+
+struct HvCallPci_DeviceInfo {
+	u32	deviceType;		/* See DeviceType enum for values */
+};
+
+struct HvCallPci_BusUnitInfo {
+	u32	sizeReturned;		/* length of data returned */
+	u32	deviceType;		/* see DeviceType enum for values */
+};
+
+struct HvCallPci_BridgeInfo {
+	struct HvCallPci_BusUnitInfo busUnitInfo;  /* Generic bus unit info */
+	u8		subBusNumber;	/* Bus number of secondary bus */
+	u8		maxAgents;	/* Max idsels on secondary bus */
+        u8              maxSubBusNumber; /* Max Sub Bus */
+	u8		logicalSlotNumber; /* Logical Slot Number for IOA */
+};
+
+
+/*
+ * Maximum BusUnitInfo buffer size.  Provided for clients so
+ * they can allocate a buffer big enough for any type of bus
+ * unit.  Increase as needed.
+ */
+enum {HvCallPci_MaxBusUnitInfoSize = 128};
+
+struct HvCallPci_BarParms {
+	u64		vaddr;
+	u64		raddr;
+	u64		size;
+	u64		protectStart;
+	u64		protectEnd;
+	u64		relocationOffset;
+	u64		pciAddress;
+	u64		reserved[3];
+};
+
+enum HvCallPci_VpdType {
+	HvCallPci_BusVpd	= 1,
+	HvCallPci_BusAdapterVpd	= 2
+};
+
+#define HvCallPciConfigLoad8		HvCallPci + 0
+#define HvCallPciConfigLoad16		HvCallPci + 1
+#define HvCallPciConfigLoad32		HvCallPci + 2
+#define HvCallPciConfigStore8		HvCallPci + 3
+#define HvCallPciConfigStore16		HvCallPci + 4
+#define HvCallPciConfigStore32		HvCallPci + 5
+#define HvCallPciEoi			HvCallPci + 16
+#define HvCallPciGetBarParms		HvCallPci + 18
+#define HvCallPciMaskFisr		HvCallPci + 20
+#define HvCallPciUnmaskFisr		HvCallPci + 21
+#define HvCallPciSetSlotReset		HvCallPci + 25
+#define HvCallPciGetDeviceInfo		HvCallPci + 27
+#define HvCallPciGetCardVpd		HvCallPci + 28
+#define HvCallPciBarLoad8		HvCallPci + 40
+#define HvCallPciBarLoad16		HvCallPci + 41
+#define HvCallPciBarLoad32		HvCallPci + 42
+#define HvCallPciBarLoad64		HvCallPci + 43
+#define HvCallPciBarStore8		HvCallPci + 44
+#define HvCallPciBarStore16		HvCallPci + 45
+#define HvCallPciBarStore32		HvCallPci + 46
+#define HvCallPciBarStore64		HvCallPci + 47
+#define HvCallPciMaskInterrupts		HvCallPci + 48
+#define HvCallPciUnmaskInterrupts	HvCallPci + 49
+#define HvCallPciGetBusUnitInfo		HvCallPci + 50
+
+static inline u64 HvCallPci_configLoad16(u16 busNumber, u8 subBusNumber,
+		u8 deviceId, u32 offset, u16 *value)
+{
+	struct HvCallPci_DsaAddr dsa;
+	struct HvCallPci_LoadReturn retVal;
+
+	*((u64*)&dsa) = 0;
+
+	dsa.busNumber = busNumber;
+	dsa.subBusNumber = subBusNumber;
+	dsa.deviceId = deviceId;
+
+	HvCall3Ret16(HvCallPciConfigLoad16, &retVal, *(u64 *)&dsa, offset, 0);
+
+	*value = retVal.value;
+
+	return retVal.rc;
+}
+
+static inline u64 HvCallPci_configStore8(u16 busNumber, u8 subBusNumber,
+		u8 deviceId, u32 offset, u8 value)
+{
+	struct HvCallPci_DsaAddr dsa;
+
+	*((u64*)&dsa) = 0;
+
+	dsa.busNumber = busNumber;
+	dsa.subBusNumber = subBusNumber;
+	dsa.deviceId = deviceId;
+
+	return HvCall4(HvCallPciConfigStore8, *(u64 *)&dsa, offset, value, 0);
+}
+
+static inline u64 HvCallPci_eoi(u16 busNumberParm, u8 subBusParm,
+		u8 deviceIdParm)
+{
+	struct HvCallPci_DsaAddr dsa;
+	struct HvCallPci_LoadReturn retVal;
+
+	*((u64*)&dsa) = 0;
+
+	dsa.busNumber = busNumberParm;
+	dsa.subBusNumber = subBusParm;
+	dsa.deviceId = deviceIdParm;
+
+	HvCall1Ret16(HvCallPciEoi, &retVal, *(u64*)&dsa);
+
+	return retVal.rc;
+}
+
+static inline u64 HvCallPci_getBarParms(u16 busNumberParm, u8 subBusParm,
+		u8 deviceIdParm, u8 barNumberParm, u64 parms, u32 sizeofParms)
+{
+	struct HvCallPci_DsaAddr dsa;
+
+	*((u64*)&dsa) = 0;
+
+	dsa.busNumber = busNumberParm;
+	dsa.subBusNumber = subBusParm;
+	dsa.deviceId = deviceIdParm;
+	dsa.barNumber = barNumberParm;
+
+	return HvCall3(HvCallPciGetBarParms, *(u64*)&dsa, parms, sizeofParms);
+}
+
+static inline u64 HvCallPci_maskFisr(u16 busNumberParm, u8 subBusParm,
+		u8 deviceIdParm, u64 fisrMask)
+{
+	struct HvCallPci_DsaAddr dsa;
+
+	*((u64*)&dsa) = 0;
+
+	dsa.busNumber = busNumberParm;
+	dsa.subBusNumber = subBusParm;
+	dsa.deviceId = deviceIdParm;
+
+	return HvCall2(HvCallPciMaskFisr, *(u64*)&dsa, fisrMask);
+}
+
+static inline u64 HvCallPci_unmaskFisr(u16 busNumberParm, u8 subBusParm,
+		u8 deviceIdParm, u64 fisrMask)
+{
+	struct HvCallPci_DsaAddr dsa;
+
+	*((u64*)&dsa) = 0;
+
+	dsa.busNumber = busNumberParm;
+	dsa.subBusNumber = subBusParm;
+	dsa.deviceId = deviceIdParm;
+
+	return HvCall2(HvCallPciUnmaskFisr, *(u64*)&dsa, fisrMask);
+}
+
+static inline u64 HvCallPci_getDeviceInfo(u16 busNumberParm, u8 subBusParm,
+		u8 deviceNumberParm, u64 parms, u32 sizeofParms)
+{
+	struct HvCallPci_DsaAddr dsa;
+
+	*((u64*)&dsa) = 0;
+
+	dsa.busNumber = busNumberParm;
+	dsa.subBusNumber = subBusParm;
+	dsa.deviceId = deviceNumberParm << 4;
+
+	return HvCall3(HvCallPciGetDeviceInfo, *(u64*)&dsa, parms, sizeofParms);
+}
+
+static inline u64 HvCallPci_maskInterrupts(u16 busNumberParm, u8 subBusParm,
+		u8 deviceIdParm, u64 interruptMask)
+{
+	struct HvCallPci_DsaAddr dsa;
+
+	*((u64*)&dsa) = 0;
+
+	dsa.busNumber = busNumberParm;
+	dsa.subBusNumber = subBusParm;
+	dsa.deviceId = deviceIdParm;
+
+	return HvCall2(HvCallPciMaskInterrupts, *(u64*)&dsa, interruptMask);
+}
+
+static inline u64 HvCallPci_unmaskInterrupts(u16 busNumberParm, u8 subBusParm,
+		u8 deviceIdParm, u64 interruptMask)
+{
+	struct HvCallPci_DsaAddr dsa;
+
+	*((u64*)&dsa) = 0;
+
+	dsa.busNumber = busNumberParm;
+	dsa.subBusNumber = subBusParm;
+	dsa.deviceId = deviceIdParm;
+
+	return HvCall2(HvCallPciUnmaskInterrupts, *(u64*)&dsa, interruptMask);
+}
+
+static inline u64 HvCallPci_getBusUnitInfo(u16 busNumberParm, u8 subBusParm,
+		u8 deviceIdParm, u64 parms, u32 sizeofParms)
+{
+	struct HvCallPci_DsaAddr dsa;
+
+	*((u64*)&dsa) = 0;
+
+	dsa.busNumber = busNumberParm;
+	dsa.subBusNumber = subBusParm;
+	dsa.deviceId = deviceIdParm;
+
+	return HvCall3(HvCallPciGetBusUnitInfo, *(u64*)&dsa, parms,
+			sizeofParms);
+}
+
+static inline int HvCallPci_getBusVpd(u16 busNumParm, u64 destParm,
+		u16 sizeParm)
+{
+	u64 xRc = HvCall4(HvCallPciGetCardVpd, busNumParm, destParm,
+			sizeParm, HvCallPci_BusVpd);
+	if (xRc == -1)
+		return -1;
+	else
+		return xRc & 0xFFFF;
+}
+
+#endif /* _PLATFORMS_ISERIES_CALL_PCI_H */
diff --git a/arch/powerpc/platforms/iseries/call_sm.h b/arch/powerpc/platforms/iseries/call_sm.h
new file mode 100644
index 000000000000..c7e251619f48
--- /dev/null
+++ b/arch/powerpc/platforms/iseries/call_sm.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ISERIES_CALL_SM_H
+#define _ISERIES_CALL_SM_H
+
+/*
+ * This file contains the "hypervisor call" interface which is used to
+ * drive the hypervisor from the OS.
+ */
+
+#include <asm/iseries/hv_call_sc.h>
+#include <asm/iseries/hv_types.h>
+
+#define HvCallSmGet64BitsOfAccessMap	HvCallSm  + 11
+
+static inline u64 HvCallSm_get64BitsOfAccessMap(HvLpIndex lpIndex,
+		u64 indexIntoBitMap)
+{
+	return HvCall2(HvCallSmGet64BitsOfAccessMap, lpIndex, indexIntoBitMap);
+}
+
+#endif /* _ISERIES_CALL_SM_H */
diff --git a/arch/ppc64/kernel/iSeries_htab.c b/arch/powerpc/platforms/iseries/htab.c
index 2192055a90a0..30bdcf3925d9 100644
--- a/arch/ppc64/kernel/iSeries_htab.c
+++ b/arch/powerpc/platforms/iseries/htab.c
@@ -1,10 +1,10 @@
 /*
  * iSeries hashtable management.
- * 	Derived from pSeries_htab.c
+ *	Derived from pSeries_htab.c
  *
  * SMP scalability work:
  *    Copyright (C) 2001 Anton Blanchard <anton@au.ibm.com>, IBM
- * 
+ *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version
@@ -14,11 +14,13 @@
 #include <asm/pgtable.h>
 #include <asm/mmu.h>
 #include <asm/mmu_context.h>
-#include <asm/iSeries/HvCallHpt.h>
 #include <asm/abs_addr.h>
 #include <linux/spinlock.h>
 
-static spinlock_t iSeries_hlocks[64] __cacheline_aligned_in_smp = { [0 ... 63] = SPIN_LOCK_UNLOCKED};
+#include "call_hpt.h"
+
+static spinlock_t iSeries_hlocks[64] __cacheline_aligned_in_smp =
+	{ [0 ... 63] = SPIN_LOCK_UNLOCKED};
 
 /*
  * Very primitive algorithm for picking up a lock
@@ -37,15 +39,16 @@ static inline void iSeries_hunlock(unsigned long slot)
 	spin_unlock(&iSeries_hlocks[(slot >> 4) & 0x3f]);
 }
 
-static long iSeries_hpte_insert(unsigned long hpte_group, unsigned long va,
-				unsigned long prpn, unsigned long vflags,
-				unsigned long rflags)
+long iSeries_hpte_insert(unsigned long hpte_group, unsigned long va,
+			 unsigned long pa, unsigned long rflags,
+			 unsigned long vflags, int psize)
 {
-	unsigned long arpn;
 	long slot;
 	hpte_t lhpte;
 	int secondary = 0;
 
+	BUG_ON(psize != MMU_PAGE_4K);
+
 	/*
 	 * The hypervisor tries both primary and secondary.
 	 * If we are being called to insert in the secondary,
@@ -57,8 +60,19 @@ static long iSeries_hpte_insert(unsigned long hpte_group, unsigned long va,
 
 	iSeries_hlock(hpte_group);
 
-	slot = HvCallHpt_findValid(&lhpte, va >> PAGE_SHIFT);
-	BUG_ON(lhpte.v & HPTE_V_VALID);
+	slot = HvCallHpt_findValid(&lhpte, va >> HW_PAGE_SHIFT);
+	if (unlikely(lhpte.v & HPTE_V_VALID)) {
+		if (vflags & HPTE_V_BOLTED) {
+			HvCallHpt_setSwBits(slot, 0x10, 0);
+			HvCallHpt_setPp(slot, PP_RWXX);
+			iSeries_hunlock(hpte_group);
+			if (slot < 0)
+				return 0x8 | (slot & 7);
+			else
+				return slot & 7;
+		}
+		BUG();
+	}
 
 	if (slot == -1)	{ /* No available entry found in either group */
 		iSeries_hunlock(hpte_group);
@@ -66,15 +80,14 @@ static long iSeries_hpte_insert(unsigned long hpte_group, unsigned long va,
 	}
 
 	if (slot < 0) {		/* MSB set means secondary group */
-		vflags |= HPTE_V_VALID;
+		vflags |= HPTE_V_SECONDARY;
 		secondary = 1;
 		slot &= 0x7fffffffffffffff;
 	}
 
-	arpn = phys_to_abs(prpn << PAGE_SHIFT) >> PAGE_SHIFT;
 
-	lhpte.v = (va >> 23) << HPTE_V_AVPN_SHIFT | vflags | HPTE_V_VALID;
-	lhpte.r = (arpn << HPTE_R_RPN_SHIFT) | rflags;
+ 	lhpte.v = hpte_encode_v(va, MMU_PAGE_4K) | vflags | HPTE_V_VALID;
+	lhpte.r = hpte_encode_r(phys_to_abs(pa), MMU_PAGE_4K) | rflags;
 
 	/* Now fill in the actual HPTE */
 	HvCallHpt_addValidate(slot, secondary, &lhpte);
@@ -107,7 +120,7 @@ static long iSeries_hpte_remove(unsigned long hpte_group)
 		hpte_v = iSeries_hpte_getword0(hpte_group + slot_offset);
 
 		if (! (hpte_v & HPTE_V_BOLTED)) {
-			HvCallHpt_invalidateSetSwBitsGet(hpte_group + 
+			HvCallHpt_invalidateSetSwBitsGet(hpte_group +
 							 slot_offset, 0, 0);
 			iSeries_hunlock(hpte_group);
 			return i;
@@ -124,20 +137,22 @@ static long iSeries_hpte_remove(unsigned long hpte_group)
 
 /*
  * The HyperVisor expects the "flags" argument in this form:
- * 	bits  0..59 : reserved
- * 	bit      60 : N
- * 	bits 61..63 : PP2,PP1,PP0
+ *	bits  0..59 : reserved
+ *	bit      60 : N
+ *	bits 61..63 : PP2,PP1,PP0
  */
 static long iSeries_hpte_updatepp(unsigned long slot, unsigned long newpp,
-				  unsigned long va, int large, int local)
+				  unsigned long va, int psize, int local)
 {
 	hpte_t hpte;
-	unsigned long avpn = va >> 23;
+	unsigned long want_v;
 
 	iSeries_hlock(slot);
 
 	HvCallHpt_get(&hpte, slot);
-	if ((HPTE_V_AVPN_VAL(hpte.v) == avpn) && (hpte.v & HPTE_V_VALID)) {
+	want_v = hpte_encode_v(va, MMU_PAGE_4K);
+
+	if (HPTE_V_COMPARE(hpte.v, want_v) && (hpte.v & HPTE_V_VALID)) {
 		/*
 		 * Hypervisor expects bits as NPPP, which is
 		 * different from how they are mapped in our PP.
@@ -152,7 +167,7 @@ static long iSeries_hpte_updatepp(unsigned long slot, unsigned long newpp,
 }
 
 /*
- * Functions used to find the PTE for a particular virtual address. 
+ * Functions used to find the PTE for a particular virtual address.
  * Only used during boot when bolting pages.
  *
  * Input : vpn      : virtual page number
@@ -170,7 +185,7 @@ static long iSeries_hpte_find(unsigned long vpn)
 	 * 0x00000000xxxxxxxx : Entry found in primary group, slot x
 	 * 0x80000000xxxxxxxx : Entry found in secondary group, slot x
 	 */
-	slot = HvCallHpt_findValid(&hpte, vpn); 
+	slot = HvCallHpt_findValid(&hpte, vpn);
 	if (hpte.v & HPTE_V_VALID) {
 		if (slot < 0) {
 			slot &= 0x7fffffffffffffff;
@@ -189,22 +204,25 @@ static long iSeries_hpte_find(unsigned long vpn)
  *
  * No need to lock here because we should be the only user.
  */
-static void iSeries_hpte_updateboltedpp(unsigned long newpp, unsigned long ea)
+static void iSeries_hpte_updateboltedpp(unsigned long newpp, unsigned long ea,
+					int psize)
 {
 	unsigned long vsid,va,vpn;
 	long slot;
 
+	BUG_ON(psize != MMU_PAGE_4K);
+
 	vsid = get_kernel_vsid(ea);
 	va = (vsid << 28) | (ea & 0x0fffffff);
-	vpn = va >> PAGE_SHIFT;
-	slot = iSeries_hpte_find(vpn); 
+	vpn = va >> HW_PAGE_SHIFT;
+	slot = iSeries_hpte_find(vpn);
 	if (slot == -1)
 		panic("updateboltedpp: Could not find page to bolt\n");
 	HvCallHpt_setPp(slot, newpp);
 }
 
 static void iSeries_hpte_invalidate(unsigned long slot, unsigned long va,
-				    int large, int local)
+				    int psize, int local)
 {
 	unsigned long hpte_v;
 	unsigned long avpn = va >> 23;
@@ -215,7 +233,7 @@ static void iSeries_hpte_invalidate(unsigned long slot, unsigned long va,
 	iSeries_hlock(slot);
 
 	hpte_v = iSeries_hpte_getword0(slot);
-	
+
 	if ((HPTE_V_AVPN_VAL(hpte_v) == avpn) && (hpte_v & HPTE_V_VALID))
 		HvCallHpt_invalidateSetSwBitsGet(slot, 0, 0);
 
@@ -230,7 +248,7 @@ void hpte_init_iSeries(void)
 	ppc_md.hpte_updatepp	= iSeries_hpte_updatepp;
 	ppc_md.hpte_updateboltedpp = iSeries_hpte_updateboltedpp;
 	ppc_md.hpte_insert	= iSeries_hpte_insert;
-	ppc_md.hpte_remove     	= iSeries_hpte_remove;
+	ppc_md.hpte_remove	= iSeries_hpte_remove;
 
 	htab_finish_init();
 }
diff --git a/arch/ppc64/kernel/hvCall.S b/arch/powerpc/platforms/iseries/hvcall.S
index 4c699eab1b95..07ae6ad5f49f 100644
--- a/arch/ppc64/kernel/hvCall.S
+++ b/arch/powerpc/platforms/iseries/hvcall.S
@@ -1,7 +1,4 @@
 /*
- * arch/ppc64/kernel/hvCall.S
- *
- *
  * This file contains the code to perform calls to the
  * iSeries LPAR hypervisor
  *
@@ -13,15 +10,16 @@
 
 #include <asm/ppc_asm.h>
 #include <asm/processor.h>
+#include <asm/ptrace.h>		/* XXX for STACK_FRAME_OVERHEAD */
 
 	.text
 
-/* 
+/*
  * Hypervisor call
- * 
+ *
  * Invoke the iSeries hypervisor via the System Call instruction
  * Parameters are passed to this routine in registers r3 - r10
- * 
+ *
  * r3 contains the HV function to be called
  * r4-r10 contain the operands to the hypervisor function
  *
@@ -41,11 +39,11 @@ _GLOBAL(HvCall7)
 	mfcr	r0
 	std	r0,-8(r1)
 	stdu	r1,-(STACK_FRAME_OVERHEAD+16)(r1)
-	
+
 	/* r0 = 0xffffffffffffffff indicates a hypervisor call */
-	
+
 	li	r0,-1
-	
+
 	/* Invoke the hypervisor */
 
 	sc
@@ -55,7 +53,7 @@ _GLOBAL(HvCall7)
 	mtcrf	0xff,r0
 
 	/*  return to caller, return value in r3 */
-	
+
 	blr
 
 _GLOBAL(HvCall0Ret16)
@@ -92,7 +90,5 @@ _GLOBAL(HvCall7Ret16)
 	ld	r0,-8(r1)
 	mtcrf	0xff,r0
 	ld	r31,-16(r1)
-	
-	blr
-
 
+	blr
diff --git a/arch/ppc64/kernel/HvCall.c b/arch/powerpc/platforms/iseries/hvlog.c
index b772e65b57a2..f476d71194fa 100644
--- a/arch/ppc64/kernel/HvCall.c
+++ b/arch/powerpc/platforms/iseries/hvlog.c
@@ -1,5 +1,4 @@
 /*
- * HvCall.c
  * Copyright (C) 2001  Mike Corrigan IBM Corporation
  * 
  * This program is free software; you can redistribute it and/or modify
@@ -10,9 +9,9 @@
 
 #include <asm/page.h>
 #include <asm/abs_addr.h>
-#include <asm/iSeries/HvCall.h>
-#include <asm/iSeries/HvCallSc.h>
-#include <asm/iSeries/HvTypes.h>
+#include <asm/iseries/hv_call.h>
+#include <asm/iseries/hv_call_sc.h>
+#include <asm/iseries/hv_types.h>
 
 
 void HvCall_writeLogBuffer(const void *buffer, u64 len)
@@ -23,7 +22,7 @@ void HvCall_writeLogBuffer(const void *buffer, u64 len)
 
 	while (len) {
 		hv_buf.addr = cur;
-		left_this_page = ((cur & PAGE_MASK) + PAGE_SIZE) - cur;
+		left_this_page = ((cur & HW_PAGE_MASK) + HW_PAGE_SIZE) - cur;
 		if (left_this_page > len)
 			left_this_page = len;
 		hv_buf.len = left_this_page;
@@ -31,6 +30,6 @@ void HvCall_writeLogBuffer(const void *buffer, u64 len)
 		HvCall2(HvCallBaseWriteLogBuffer,
 				virt_to_abs(&hv_buf),
 				left_this_page);
-		cur = (cur & PAGE_MASK) + PAGE_SIZE;
+		cur = (cur & HW_PAGE_MASK) + HW_PAGE_SIZE;
 	}
 }
diff --git a/arch/ppc64/kernel/HvLpConfig.c b/arch/powerpc/platforms/iseries/hvlpconfig.c
index cb1d6473203c..663a1affb4bb 100644
--- a/arch/ppc64/kernel/HvLpConfig.c
+++ b/arch/powerpc/platforms/iseries/hvlpconfig.c
@@ -1,5 +1,4 @@
 /*
- * HvLpConfig.c
  * Copyright (C) 2001  Kyle A. Lucke, IBM Corporation
  * 
  * This program is free software; you can redistribute it and/or modify
@@ -18,7 +17,7 @@
  */
 
 #include <linux/module.h>
-#include <asm/iSeries/HvLpConfig.h>
+#include <asm/iseries/hv_lp_config.h>
 
 HvLpIndex HvLpConfig_getLpIndex_outline(void)
 {
diff --git a/arch/ppc64/kernel/iSeries_iommu.c b/arch/powerpc/platforms/iseries/iommu.c
index f8ff1bb054dc..2b54eeb2c899 100644
--- a/arch/ppc64/kernel/iSeries_iommu.c
+++ b/arch/powerpc/platforms/iseries/iommu.c
@@ -1,11 +1,9 @@
 /*
- * arch/ppc64/kernel/iSeries_iommu.c
- *
  * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
  *
  * Rewrite, cleanup:
  *
- * Copyright (C) 2004 Olof Johansson <olof@austin.ibm.com>, IBM Corporation
+ * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
  *
  * Dynamic DMA mapping support, iSeries-specific parts.
  *
@@ -30,9 +28,11 @@
 #include <linux/list.h>
 
 #include <asm/iommu.h>
+#include <asm/tce.h>
 #include <asm/machdep.h>
-#include <asm/iSeries/HvCallXm.h>
-#include <asm/iSeries/iSeries_pci.h>
+#include <asm/abs_addr.h>
+#include <asm/pci-bridge.h>
+#include <asm/iseries/hv_call_xm.h>
 
 extern struct list_head iSeries_Global_Device_List;
 
@@ -43,9 +43,12 @@ static void tce_build_iSeries(struct iommu_table *tbl, long index, long npages,
 	u64 rc;
 	union tce_entry tce;
 
+	index <<= TCE_PAGE_FACTOR;
+	npages <<= TCE_PAGE_FACTOR;
+
 	while (npages--) {
 		tce.te_word = 0;
-		tce.te_bits.tb_rpn = virt_to_abs(uaddr) >> PAGE_SHIFT;
+		tce.te_bits.tb_rpn = virt_to_abs(uaddr) >> TCE_SHIFT;
 
 		if (tbl->it_type == TCE_VB) {
 			/* Virtual Bus */
@@ -66,7 +69,7 @@ static void tce_build_iSeries(struct iommu_table *tbl, long index, long npages,
 			panic("PCI_DMA: HvCallXm_setTce failed, Rc: 0x%lx\n",
 					rc);
 		index++;
-		uaddr += PAGE_SIZE;
+		uaddr += TCE_PAGE_SIZE;
 	}
 }
 
@@ -74,6 +77,9 @@ static void tce_free_iSeries(struct iommu_table *tbl, long index, long npages)
 {
 	u64 rc;
 
+	npages <<= TCE_PAGE_FACTOR;
+	index <<= TCE_PAGE_FACTOR;
+
 	while (npages--) {
 		rc = HvCallXm_setTce((u64)tbl->it_index, (u64)index, 0);
 		if (rc)
@@ -83,26 +89,6 @@ static void tce_free_iSeries(struct iommu_table *tbl, long index, long npages)
 	}
 }
 
-#ifdef CONFIG_PCI
-/*
- * This function compares the known tables to find an iommu_table
- * that has already been built for hardware TCEs.
- */
-static struct iommu_table *iommu_table_find(struct iommu_table * tbl)
-{
-	struct iSeries_Device_Node *dp;
-
-	list_for_each_entry(dp, &iSeries_Global_Device_List, Device_List) {
-		if ((dp->iommu_table != NULL) &&
-		    (dp->iommu_table->it_type == TCE_PCI) &&
-		    (dp->iommu_table->it_offset == tbl->it_offset) &&
-		    (dp->iommu_table->it_index == tbl->it_index) &&
-		    (dp->iommu_table->it_size == tbl->it_size))
-			return dp->iommu_table;
-	}
-	return NULL;
-}
-
 /*
  * Call Hv with the architected data structure to get TCE table info.
  * info. Put the returned data into the Linux representation of the
@@ -112,8 +98,10 @@ static struct iommu_table *iommu_table_find(struct iommu_table * tbl)
  * 2. TCE table per Bus.
  * 3. TCE Table per IOA.
  */
-static void iommu_table_getparms(struct iSeries_Device_Node* dn,
-				 struct iommu_table* tbl)
+void iommu_table_getparms_iSeries(unsigned long busno,
+				  unsigned char slotno,
+				  unsigned char virtbus,
+				  struct iommu_table* tbl)
 {
 	struct iommu_table_cb *parms;
 
@@ -123,39 +111,63 @@ static void iommu_table_getparms(struct iSeries_Device_Node* dn,
 
 	memset(parms, 0, sizeof(*parms));
 
-	parms->itc_busno = ISERIES_BUS(dn);
-	parms->itc_slotno = dn->LogicalSlot;
-	parms->itc_virtbus = 0;
+	parms->itc_busno = busno;
+	parms->itc_slotno = slotno;
+	parms->itc_virtbus = virtbus;
 
-	HvCallXm_getTceTableParms(ISERIES_HV_ADDR(parms));
+	HvCallXm_getTceTableParms(iseries_hv_addr(parms));
 
 	if (parms->itc_size == 0)
 		panic("PCI_DMA: parms->size is zero, parms is 0x%p", parms);
 
 	/* itc_size is in pages worth of table, it_size is in # of entries */
-	tbl->it_size = (parms->itc_size * PAGE_SIZE) / sizeof(union tce_entry);
+	tbl->it_size = ((parms->itc_size * TCE_PAGE_SIZE) /
+			sizeof(union tce_entry)) >> TCE_PAGE_FACTOR;
 	tbl->it_busno = parms->itc_busno;
-	tbl->it_offset = parms->itc_offset;
+	tbl->it_offset = parms->itc_offset >> TCE_PAGE_FACTOR;
 	tbl->it_index = parms->itc_index;
 	tbl->it_blocksize = 1;
-	tbl->it_type = TCE_PCI;
+	tbl->it_type = virtbus ? TCE_VB : TCE_PCI;
 
 	kfree(parms);
 }
 
 
-void iommu_devnode_init_iSeries(struct iSeries_Device_Node *dn)
+#ifdef CONFIG_PCI
+/*
+ * This function compares the known tables to find an iommu_table
+ * that has already been built for hardware TCEs.
+ */
+static struct iommu_table *iommu_table_find(struct iommu_table * tbl)
+{
+	struct pci_dn *pdn;
+
+	list_for_each_entry(pdn, &iSeries_Global_Device_List, Device_List) {
+		struct iommu_table *it = pdn->iommu_table;
+		if ((it != NULL) &&
+		    (it->it_type == TCE_PCI) &&
+		    (it->it_offset == tbl->it_offset) &&
+		    (it->it_index == tbl->it_index) &&
+		    (it->it_size == tbl->it_size))
+			return it;
+	}
+	return NULL;
+}
+
+
+void iommu_devnode_init_iSeries(struct device_node *dn)
 {
 	struct iommu_table *tbl;
+	struct pci_dn *pdn = PCI_DN(dn);
 
 	tbl = kmalloc(sizeof(struct iommu_table), GFP_KERNEL);
 
-	iommu_table_getparms(dn, tbl);
+	iommu_table_getparms_iSeries(pdn->busno, pdn->LogicalSlot, 0, tbl);
 
 	/* Look for existing tce table */
-	dn->iommu_table = iommu_table_find(tbl);
-	if (dn->iommu_table == NULL)
-		dn->iommu_table = iommu_init_table(tbl);
+	pdn->iommu_table = iommu_table_find(tbl);
+	if (pdn->iommu_table == NULL)
+		pdn->iommu_table = iommu_init_table(tbl);
 	else
 		kfree(tbl);
 }
diff --git a/arch/powerpc/platforms/iseries/ipl_parms.h b/arch/powerpc/platforms/iseries/ipl_parms.h
new file mode 100644
index 000000000000..77c135ddbf1b
--- /dev/null
+++ b/arch/powerpc/platforms/iseries/ipl_parms.h
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ISERIES_IPL_PARMS_H
+#define _ISERIES_IPL_PARMS_H
+
+/*
+ *	This struct maps the IPL Parameters DMA'd from the SP.
+ *
+ * Warning:
+ *	This data must map in exactly 64 bytes and match the architecture for
+ *	the IPL parms
+ */
+
+#include <asm/types.h>
+
+struct ItIplParmsReal {
+	u8	xFormat;		// Defines format of IplParms	x00-x00
+	u8	xRsvd01:6;		// Reserved			x01-x01
+	u8	xAlternateSearch:1;	// Alternate search indicator	...
+	u8	xUaSupplied:1;		// UA Supplied on programmed IPL...
+	u8	xLsUaFormat;		// Format byte for UA		x02-x02
+	u8	xRsvd02;		// Reserved			x03-x03
+	u32	xLsUa;			// LS UA			x04-x07
+	u32	xUnusedLsLid;		// First OS LID to load		x08-x0B
+	u16	xLsBusNumber;		// LS Bus Number		x0C-x0D
+	u8	xLsCardAdr;		// LS Card Address		x0E-x0E
+	u8	xLsBoardAdr;		// LS Board Address		x0F-x0F
+	u32	xRsvd03;		// Reserved			x10-x13
+	u8	xSpcnPresent:1;		// SPCN present			x14-x14
+	u8	xCpmPresent:1;		// CPM present			...
+	u8	xRsvd04:6;		// Reserved			...
+	u8	xRsvd05:4;		// Reserved			x15-x15
+	u8	xKeyLock:4;		// Keylock setting		...
+	u8	xRsvd06:6;		// Reserved			x16-x16
+	u8	xIplMode:2;		// Ipl mode (A|B|C|D)		...
+	u8	xHwIplType;		// Fast v slow v slow EC HW IPL	x17-x17
+	u16	xCpmEnabledIpl:1;	// CPM in effect when IPL initiatedx18-x19
+	u16	xPowerOnResetIpl:1;	// Indicate POR condition	...
+	u16	xMainStorePreserved:1;	// Main Storage is preserved	...
+	u16	xRsvd07:13;		// Reserved			...
+	u16	xIplSource:16;		// Ipl source			x1A-x1B
+	u8	xIplReason:8;		// Reason for this IPL		x1C-x1C
+	u8	xRsvd08;		// Reserved			x1D-x1D
+	u16	xRsvd09;		// Reserved			x1E-x1F
+	u16	xSysBoxType;		// System Box Type		x20-x21
+	u16	xSysProcType;		// System Processor Type	x22-x23
+	u32	xRsvd10;		// Reserved			x24-x27
+	u64	xRsvd11;		// Reserved			x28-x2F
+	u64	xRsvd12;		// Reserved			x30-x37
+	u64	xRsvd13;		// Reserved			x38-x3F
+};
+
+extern struct ItIplParmsReal	xItIplParmsReal;
+
+#endif /* _ISERIES_IPL_PARMS_H */
diff --git a/arch/ppc64/kernel/iSeries_irq.c b/arch/powerpc/platforms/iseries/irq.c
index 77376c1bd611..a58daa153686 100644
--- a/arch/ppc64/kernel/iSeries_irq.c
+++ b/arch/powerpc/platforms/iseries/irq.c
@@ -35,19 +35,12 @@
 #include <linux/irq.h>
 #include <linux/spinlock.h>
 
-#include <asm/ppcdebug.h>
-#include <asm/iSeries/HvTypes.h>
-#include <asm/iSeries/HvLpEvent.h>
-#include <asm/iSeries/HvCallPci.h>
-#include <asm/iSeries/HvCallXm.h>
-#include <asm/iSeries/iSeries_irq.h>
+#include <asm/iseries/hv_types.h>
+#include <asm/iseries/hv_lp_event.h>
+#include <asm/iseries/hv_call_xm.h>
 
-/* This maps virtual irq numbers to real irqs */
-unsigned int virt_irq_to_real_map[NR_IRQS];
-
-/* The next available virtual irq number */
-/* Note: the pcnet32 driver assumes irq numbers < 2 aren't valid. :( */
-static int next_virtual_irq = 2;
+#include "irq.h"
+#include "call_pci.h"
 
 static long Pci_Interrupt_Count;
 static long Pci_Event_Count;
@@ -103,6 +96,9 @@ static void intReceived(struct XmPciLpEvent *eventParm,
 		struct pt_regs *regsParm)
 {
 	int irq;
+#ifdef CONFIG_IRQSTACKS
+	struct thread_info *curtp, *irqtp;
+#endif
 
 	++Pci_Interrupt_Count;
 
@@ -110,7 +106,20 @@ static void intReceived(struct XmPciLpEvent *eventParm,
 	case XmPciLpEvent_SlotInterrupt:
 		irq = eventParm->hvLpEvent.xCorrelationToken;
 		/* Dispatch the interrupt handlers for this irq */
-		ppc_irq_dispatch_handler(regsParm, irq);
+#ifdef CONFIG_IRQSTACKS
+		/* Switch to the irq stack to handle this */
+		curtp = current_thread_info();
+		irqtp = hardirq_ctx[smp_processor_id()];
+		if (curtp != irqtp) {
+			irqtp->task = curtp->task;
+			irqtp->flags = 0;
+			call___do_IRQ(irq, regsParm, irqtp);
+			irqtp->task = NULL;
+			if (irqtp->flags)
+				set_bits(irqtp->flags, &curtp->flags);
+		} else
+#endif
+			__do_IRQ(irq, regsParm);
 		HvCallPci_eoi(eventParm->eventData.slotInterrupt.busNumber,
 			eventParm->eventData.slotInterrupt.subBusNumber,
 			eventParm->eventData.slotInterrupt.deviceId);
@@ -226,8 +235,6 @@ static void iSeries_enable_IRQ(unsigned int irq)
 	/* Unmask secondary INTA */
 	mask = 0x80000000;
 	HvCallPci_unmaskInterrupts(bus, subBus, deviceId, mask);
-	PPCDBG(PPCDBG_BUSWALK, "iSeries_enable_IRQ 0x%02X.%02X.%02X 0x%04X\n",
-			bus, subBus, deviceId, irq);
 }
 
 /* This is called by iSeries_activate_IRQs */
@@ -309,15 +316,11 @@ static void iSeries_disable_IRQ(unsigned int irq)
 	/* Mask secondary INTA   */
 	mask = 0x80000000;
 	HvCallPci_maskInterrupts(bus, subBus, deviceId, mask);
-	PPCDBG(PPCDBG_BUSWALK, "iSeries_disable_IRQ 0x%02X.%02X.%02X 0x%04X\n",
-			bus, subBus, deviceId, irq);
 }
 
 /*
- * Need to define this so ppc_irq_dispatch_handler will NOT call
- * enable_IRQ at the end of interrupt handling.  However, this does
- * nothing because there is not enough information provided to do
- * the EOI HvCall.  This is done by XmPciLpEvent.c
+ * This does nothing because there is not enough information
+ * provided to do the EOI HvCall.  This is done by XmPciLpEvent.c
  */
 static void iSeries_end_IRQ(unsigned int irq)
 {
@@ -340,13 +343,13 @@ static hw_irq_controller iSeries_IRQ_handler = {
 int __init iSeries_allocate_IRQ(HvBusNumber busNumber,
 		HvSubBusNumber subBusNumber, HvAgentId deviceId)
 {
-	unsigned int realirq, virtirq;
+	int virtirq;
+	unsigned int realirq;
 	u8 idsel = (deviceId >> 4);
 	u8 function = deviceId & 7;
 
-	virtirq = next_virtual_irq++;
 	realirq = ((busNumber - 1) << 6) + ((idsel - 1) << 3) + function;
-	virt_irq_to_real_map[virtirq] = realirq;
+	virtirq = virt_irq_create_mapping(realirq);
 
 	irq_desc[virtirq].handler = &iSeries_IRQ_handler;
 	return virtirq;
diff --git a/arch/powerpc/platforms/iseries/irq.h b/arch/powerpc/platforms/iseries/irq.h
new file mode 100644
index 000000000000..5f643f16ecc0
--- /dev/null
+++ b/arch/powerpc/platforms/iseries/irq.h
@@ -0,0 +1,8 @@
+#ifndef	_ISERIES_IRQ_H
+#define	_ISERIES_IRQ_H
+
+extern void iSeries_init_IRQ(void);
+extern int  iSeries_allocate_IRQ(HvBusNumber, HvSubBusNumber, HvAgentId);
+extern void iSeries_activate_IRQs(void);
+
+#endif /* _ISERIES_IRQ_H */
diff --git a/arch/powerpc/platforms/iseries/ksyms.c b/arch/powerpc/platforms/iseries/ksyms.c
new file mode 100644
index 000000000000..a2200842f4e5
--- /dev/null
+++ b/arch/powerpc/platforms/iseries/ksyms.c
@@ -0,0 +1,27 @@
+/*
+ * (C) 2001-2005 PPC 64 Team, IBM Corp
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+#include <linux/module.h>
+
+#include <asm/hw_irq.h>
+#include <asm/iseries/hv_call_sc.h>
+
+EXPORT_SYMBOL(HvCall0);
+EXPORT_SYMBOL(HvCall1);
+EXPORT_SYMBOL(HvCall2);
+EXPORT_SYMBOL(HvCall3);
+EXPORT_SYMBOL(HvCall4);
+EXPORT_SYMBOL(HvCall5);
+EXPORT_SYMBOL(HvCall6);
+EXPORT_SYMBOL(HvCall7);
+
+#ifdef CONFIG_SMP
+EXPORT_SYMBOL(local_get_flags);
+EXPORT_SYMBOL(local_irq_disable);
+EXPORT_SYMBOL(local_irq_restore);
+#endif
diff --git a/arch/ppc64/kernel/LparData.c b/arch/powerpc/platforms/iseries/lpardata.c
index 0a9c23ca2f0c..bb8c91537f35 100644
--- a/arch/ppc64/kernel/LparData.c
+++ b/arch/powerpc/platforms/iseries/lpardata.c
@@ -1,4 +1,4 @@
-/* 
+/*
  * Copyright 2001 Mike Corrigan, IBM Corp
  *
  * This program is free software; you can redistribute it and/or
@@ -13,24 +13,24 @@
 #include <linux/bitops.h>
 #include <asm/processor.h>
 #include <asm/ptrace.h>
-#include <asm/naca.h>
 #include <asm/abs_addr.h>
-#include <asm/iSeries/ItLpNaca.h>
+#include <asm/iseries/it_lp_naca.h>
 #include <asm/lppaca.h>
-#include <asm/iSeries/ItLpRegSave.h>
+#include <asm/iseries/it_lp_reg_save.h>
 #include <asm/paca.h>
-#include <asm/iSeries/HvReleaseData.h>
-#include <asm/iSeries/LparMap.h>
-#include <asm/iSeries/ItVpdAreas.h>
-#include <asm/iSeries/ItIplParmsReal.h>
-#include <asm/iSeries/ItExtVpdPanel.h>
-#include <asm/iSeries/ItLpQueue.h>
-#include <asm/iSeries/IoHriProcessorVpd.h>
-#include <asm/iSeries/ItSpCommArea.h>
+#include <asm/iseries/lpar_map.h>
+#include <asm/iseries/it_exp_vpd_panel.h>
+#include <asm/iseries/it_lp_queue.h>
 
+#include "naca.h"
+#include "vpd_areas.h"
+#include "spcomm_area.h"
+#include "ipl_parms.h"
+#include "processor_vpd.h"
+#include "release_data.h"
 
-/* The HvReleaseData is the root of the information shared between 
- * the hypervisor and Linux.  
+/* The HvReleaseData is the root of the information shared between
+ * the hypervisor and Linux.
  */
 struct HvReleaseData hvReleaseData = {
 	.xDesc = 0xc8a5d9c4,	/* "HvRD" ebcdic */
@@ -79,7 +79,7 @@ extern void trap_0e_iSeries(void);
 extern void performance_monitor_iSeries(void);
 extern void data_access_slb_iSeries(void);
 extern void instruction_access_slb_iSeries(void);
-	
+
 struct ItLpNaca itLpNaca = {
 	.xDesc = 0xd397d581,		/* "LpNa" ebcdic */
 	.xSize = 0x0400,		/* size of ItLpNaca */
@@ -106,7 +106,7 @@ struct ItLpNaca itLpNaca = {
 	.xLoadAreaChunks = 0,		/* chunks for load area */
 	.xPaseSysCallCRMask = 0,	/* PASE mask */
 	.xSlicSegmentTablePtr = 0,	/* seg table */
-	.xOldLpQueue = { 0 }, 		/* Old LP Queue */
+	.xOldLpQueue = { 0 },		/* Old LP Queue */
 	.xInterruptHdlr = {
 		(u64)system_reset_iSeries,	/* 0x100 System Reset */
 		(u64)machine_check_iSeries,	/* 0x200 Machine Check */
@@ -134,7 +134,7 @@ struct ItLpNaca itLpNaca = {
 EXPORT_SYMBOL(itLpNaca);
 
 /* May be filled in by the hypervisor so cannot end up in the BSS */
-struct ItIplParmsReal xItIplParmsReal __attribute__((__section__(".data"))); 
+struct ItIplParmsReal xItIplParmsReal __attribute__((__section__(".data")));
 
 /* May be filled in by the hypervisor so cannot end up in the BSS */
 struct ItExtVpdPanel xItExtVpdPanel __attribute__((__section__(".data")));
@@ -151,7 +151,7 @@ struct IoHriProcessorVpd xIoHriProcessorVpd[maxPhysicalProcessors] = {
 		.xPVR = 0x3600
 	}
 };
-	
+
 /* Space for Main Store Vpd 27,200 bytes */
 /* May be filled in by the hypervisor so cannot end up in the BSS */
 u64    xMsVpd[3400] __attribute__((__section__(".data")));
@@ -197,7 +197,7 @@ struct ItVpdAreas itVpdAreas = {
 		26992,			/*	 7 length of MS VPD */
 		0,			/*       8 */
 		sizeof(struct ItLpNaca),/*       9 length of LP Naca */
-		0, 			/*	10 */
+		0,			/*	10 */
 		256,			/*	11 length of Recovery Log Buf */
 		sizeof(struct SpCommArea), /*   12 length of SP Comm Area */
 		0,0,0,			/* 13 - 15 */
@@ -207,7 +207,7 @@ struct ItVpdAreas itVpdAreas = {
 		0,0			/* 24 - 25 */
 		},
 	.xSlicVpdAdrs = {			/* VPD addresses */
-		0,0,0,  		/*	 0 -  2 */
+		0,0,0,			/*	 0 -  2 */
 		&xItExtVpdPanel,        /*       3 Extended VPD */
 		&paca[0],		/*       4 first Paca */
 		0,			/*       5 */
diff --git a/arch/ppc64/kernel/ItLpQueue.c b/arch/powerpc/platforms/iseries/lpevents.c
index 4231861288a3..e9fb98bf895f 100644
--- a/arch/ppc64/kernel/ItLpQueue.c
+++ b/arch/powerpc/platforms/iseries/lpevents.c
@@ -1,5 +1,4 @@
 /*
- * ItLpQueue.c
  * Copyright (C) 2001 Mike Corrigan  IBM Corporation
  *
  * This program is free software; you can redistribute it and/or modify
@@ -14,11 +13,14 @@
 #include <linux/bootmem.h>
 #include <linux/seq_file.h>
 #include <linux/proc_fs.h>
+#include <linux/module.h>
+
 #include <asm/system.h>
 #include <asm/paca.h>
-#include <asm/iSeries/ItLpQueue.h>
-#include <asm/iSeries/HvLpEvent.h>
-#include <asm/iSeries/HvCallEvent.h>
+#include <asm/iseries/it_lp_queue.h>
+#include <asm/iseries/hv_lp_event.h>
+#include <asm/iseries/hv_call_event.h>
+#include <asm/iseries/it_lp_naca.h>
 
 /*
  * The LpQueue is used to pass event data from the hypervisor to
@@ -43,7 +45,8 @@ static char *event_types[HvLpEvent_Type_NumTypes] = {
 };
 
 /* Array of LpEvent handler functions */
-extern LpEventHandler lpEventHandler[HvLpEvent_Type_NumTypes];
+static LpEventHandler lpEventHandler[HvLpEvent_Type_NumTypes];
+static unsigned lpEventHandlerPaths[HvLpEvent_Type_NumTypes];
 
 static struct HvLpEvent * get_next_hvlpevent(void)
 {
@@ -181,11 +184,7 @@ void setup_hvlpevent_queue(void)
 {
 	void *eventStack;
 
-	/*
-	 * Allocate a page for the Event Stack. The Hypervisor needs the
-	 * absolute real address, so we subtract out the KERNELBASE and add
-	 * in the absolute real address of the kernel load area.
-	 */
+	/* Allocate a page for the Event Stack. */
 	eventStack = alloc_bootmem_pages(LpEventStackSize);
 	memset(eventStack, 0, LpEventStackSize);
 
@@ -199,6 +198,70 @@ void setup_hvlpevent_queue(void)
 	hvlpevent_queue.xIndex = 0;
 }
 
+/* Register a handler for an LpEvent type */
+int HvLpEvent_registerHandler(HvLpEvent_Type eventType, LpEventHandler handler)
+{
+	if (eventType < HvLpEvent_Type_NumTypes) {
+		lpEventHandler[eventType] = handler;
+		return 0;
+	}
+	return 1;
+}
+EXPORT_SYMBOL(HvLpEvent_registerHandler);
+
+int HvLpEvent_unregisterHandler(HvLpEvent_Type eventType)
+{
+	might_sleep();
+
+	if (eventType < HvLpEvent_Type_NumTypes) {
+		if (!lpEventHandlerPaths[eventType]) {
+			lpEventHandler[eventType] = NULL;
+			/*
+			 * We now sleep until all other CPUs have scheduled.
+			 * This ensures that the deletion is seen by all
+			 * other CPUs, and that the deleted handler isn't
+			 * still running on another CPU when we return.
+			 */
+			synchronize_rcu();
+			return 0;
+		}
+	}
+	return 1;
+}
+EXPORT_SYMBOL(HvLpEvent_unregisterHandler);
+
+/*
+ * lpIndex is the partition index of the target partition.
+ * needed only for VirtualIo, VirtualLan and SessionMgr.  Zero
+ * indicates to use our partition index - for the other types.
+ */
+int HvLpEvent_openPath(HvLpEvent_Type eventType, HvLpIndex lpIndex)
+{
+	if ((eventType < HvLpEvent_Type_NumTypes) &&
+			lpEventHandler[eventType]) {
+		if (lpIndex == 0)
+			lpIndex = itLpNaca.xLpIndex;
+		HvCallEvent_openLpEventPath(lpIndex, eventType);
+		++lpEventHandlerPaths[eventType];
+		return 0;
+	}
+	return 1;
+}
+
+int HvLpEvent_closePath(HvLpEvent_Type eventType, HvLpIndex lpIndex)
+{
+	if ((eventType < HvLpEvent_Type_NumTypes) &&
+			lpEventHandler[eventType] &&
+			lpEventHandlerPaths[eventType]) {
+		if (lpIndex == 0)
+			lpIndex = itLpNaca.xLpIndex;
+		HvCallEvent_closeLpEventPath(lpIndex, eventType);
+		--lpEventHandlerPaths[eventType];
+		return 0;
+	}
+	return 1;
+}
+
 static int proc_lpevents_show(struct seq_file *m, void *v)
 {
 	int cpu, i;
diff --git a/arch/powerpc/platforms/iseries/main_store.h b/arch/powerpc/platforms/iseries/main_store.h
new file mode 100644
index 000000000000..74f6889f834f
--- /dev/null
+++ b/arch/powerpc/platforms/iseries/main_store.h
@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _ISERIES_MAIN_STORE_H
+#define _ISERIES_MAIN_STORE_H
+
+/* Main Store Vpd for Condor,iStar,sStar */
+struct IoHriMainStoreSegment4 {
+	u8	msArea0Exists:1;
+	u8	msArea1Exists:1;
+	u8	msArea2Exists:1;
+	u8	msArea3Exists:1;
+	u8	reserved1:4;
+	u8	reserved2;
+
+	u8	msArea0Functional:1;
+	u8	msArea1Functional:1;
+	u8	msArea2Functional:1;
+	u8	msArea3Functional:1;
+	u8	reserved3:4;
+	u8	reserved4;
+
+	u32	totalMainStore;
+
+	u64	msArea0Ptr;
+	u64	msArea1Ptr;
+	u64	msArea2Ptr;
+	u64	msArea3Ptr;
+
+	u32	cardProductionLevel;
+
+	u32	msAdrHole;
+
+	u8	msArea0HasRiserVpd:1;
+	u8	msArea1HasRiserVpd:1;
+	u8	msArea2HasRiserVpd:1;
+	u8	msArea3HasRiserVpd:1;
+	u8	reserved5:4;
+	u8	reserved6;
+	u16	reserved7;
+
+	u8	reserved8[28];
+
+	u64	nonInterleavedBlocksStartAdr;
+	u64	nonInterleavedBlocksEndAdr;
+};
+
+/* Main Store VPD for Power4 */
+struct IoHriMainStoreChipInfo1 {
+	u32	chipMfgID	__attribute((packed));
+	char	chipECLevel[4]	__attribute((packed));
+};
+
+struct IoHriMainStoreVpdIdData {
+	char	typeNumber[4];
+	char	modelNumber[4];
+	char	partNumber[12];
+	char	serialNumber[12];
+};
+
+struct IoHriMainStoreVpdFruData {
+	char	fruLabel[8]	__attribute((packed));
+	u8	numberOfSlots	__attribute((packed));
+	u8	pluggingType	__attribute((packed));
+	u16	slotMapIndex	__attribute((packed));
+};
+
+struct IoHriMainStoreAdrRangeBlock {
+	void	*blockStart      __attribute((packed));
+	void	*blockEnd        __attribute((packed));
+	u32	blockProcChipId __attribute((packed));
+};
+
+#define MaxAreaAdrRangeBlocks 4
+
+struct IoHriMainStoreArea4 {
+	u32	msVpdFormat			__attribute((packed));
+	u8	containedVpdType		__attribute((packed));
+	u8	reserved1			__attribute((packed));
+	u16	reserved2			__attribute((packed));
+
+	u64	msExists			__attribute((packed));
+	u64	msFunctional			__attribute((packed));
+
+	u32	memorySize			__attribute((packed));
+	u32	procNodeId			__attribute((packed));
+
+	u32	numAdrRangeBlocks		__attribute((packed));
+	struct IoHriMainStoreAdrRangeBlock xAdrRangeBlock[MaxAreaAdrRangeBlocks]	__attribute((packed));
+
+	struct IoHriMainStoreChipInfo1	chipInfo0	__attribute((packed));
+	struct IoHriMainStoreChipInfo1	chipInfo1	__attribute((packed));
+	struct IoHriMainStoreChipInfo1	chipInfo2	__attribute((packed));
+	struct IoHriMainStoreChipInfo1	chipInfo3	__attribute((packed));
+	struct IoHriMainStoreChipInfo1	chipInfo4	__attribute((packed));
+	struct IoHriMainStoreChipInfo1	chipInfo5	__attribute((packed));
+	struct IoHriMainStoreChipInfo1	chipInfo6	__attribute((packed));
+	struct IoHriMainStoreChipInfo1	chipInfo7	__attribute((packed));
+
+	void	*msRamAreaArray			__attribute((packed));
+	u32	msRamAreaArrayNumEntries	__attribute((packed));
+	u32	msRamAreaArrayEntrySize		__attribute((packed));
+
+	u32	numaDimmExists			__attribute((packed));
+	u32	numaDimmFunctional		__attribute((packed));
+	void	*numaDimmArray			__attribute((packed));
+	u32	numaDimmArrayNumEntries		__attribute((packed));
+	u32	numaDimmArrayEntrySize		__attribute((packed));
+
+	struct IoHriMainStoreVpdIdData idData	__attribute((packed));
+
+	u64	powerData			__attribute((packed));
+	u64	cardAssemblyPartNum		__attribute((packed));
+	u64	chipSerialNum			__attribute((packed));
+
+	u64	reserved3			__attribute((packed));
+	char	reserved4[16]			__attribute((packed));
+
+	struct IoHriMainStoreVpdFruData fruData	__attribute((packed));
+
+	u8	vpdPortNum			__attribute((packed));
+	u8	reserved5			__attribute((packed));
+	u8	frameId				__attribute((packed));
+	u8	rackUnit			__attribute((packed));
+	char	asciiKeywordVpd[256]		__attribute((packed));
+	u32	reserved6			__attribute((packed));
+};
+
+
+struct IoHriMainStoreSegment5 {
+	u16	reserved1;
+	u8	reserved2;
+	u8	msVpdFormat;
+
+	u32	totalMainStore;
+	u64	maxConfiguredMsAdr;
+
+	struct IoHriMainStoreArea4	*msAreaArray;
+	u32	msAreaArrayNumEntries;
+	u32	msAreaArrayEntrySize;
+
+	u32	msAreaExists;
+	u32	msAreaFunctional;
+
+	u64	reserved3;
+};
+
+extern u64	xMsVpd[];
+
+#endif	/* _ISERIES_MAIN_STORE_H */
diff --git a/arch/ppc64/kernel/mf.c b/arch/powerpc/platforms/iseries/mf.c
index ef4a338ebd01..49e7e4b85847 100644
--- a/arch/ppc64/kernel/mf.c
+++ b/arch/powerpc/platforms/iseries/mf.c
@@ -1,29 +1,28 @@
 /*
-  * mf.c
-  * Copyright (C) 2001 Troy D. Armstrong  IBM Corporation
-  * Copyright (C) 2004-2005 Stephen Rothwell  IBM Corporation
-  *
-  * This modules exists as an interface between a Linux secondary partition
-  * running on an iSeries and the primary partition's Virtual Service
-  * Processor (VSP) object.  The VSP has final authority over powering on/off
-  * all partitions in the iSeries.  It also provides miscellaneous low-level
-  * machine facility type operations.
-  *
-  *
-  * This program is free software; you can redistribute it and/or modify
-  * it under the terms of the GNU General Public License as published by
-  * the Free Software Foundation; either version 2 of the License, or
-  * (at your option) any later version.
-  *
-  * This program is distributed in the hope that it will be useful,
-  * but WITHOUT ANY WARRANTY; without even the implied warranty of
-  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-  * GNU General Public License for more details.
-  *
-  * You should have received a copy of the GNU General Public License
-  * along with this program; if not, write to the Free Software
-  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
-  */
+ * Copyright (C) 2001 Troy D. Armstrong  IBM Corporation
+ * Copyright (C) 2004-2005 Stephen Rothwell  IBM Corporation
+ *
+ * This modules exists as an interface between a Linux secondary partition
+ * running on an iSeries and the primary partition's Virtual Service
+ * Processor (VSP) object.  The VSP has final authority over powering on/off
+ * all partitions in the iSeries.  It also provides miscellaneous low-level
+ * machine facility type operations.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
 
 #include <linux/types.h>
 #include <linux/errno.h>
@@ -33,14 +32,20 @@
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
 #include <linux/bcd.h>
+#include <linux/rtc.h>
 
 #include <asm/time.h>
 #include <asm/uaccess.h>
 #include <asm/paca.h>
-#include <asm/iSeries/vio.h>
-#include <asm/iSeries/mf.h>
-#include <asm/iSeries/HvLpConfig.h>
-#include <asm/iSeries/ItLpQueue.h>
+#include <asm/abs_addr.h>
+#include <asm/iseries/vio.h>
+#include <asm/iseries/mf.h>
+#include <asm/iseries/hv_lp_config.h>
+#include <asm/iseries/it_lp_queue.h>
+
+#include "setup.h"
+
+extern int piranha_simulator;
 
 /*
  * This is the structure layout for the Machine Facilites LPAR event
@@ -1061,10 +1066,10 @@ static void mf_getSrcHistory(char *buffer, int size)
 	ev->event.data.vsp_cmd.lp_index = HvLpConfig_getLpIndex();
 	ev->event.data.vsp_cmd.result_code = 0xFF;
 	ev->event.data.vsp_cmd.reserved = 0;
-	ev->event.data.vsp_cmd.sub_data.page[0] = ISERIES_HV_ADDR(pages[0]);
-	ev->event.data.vsp_cmd.sub_data.page[1] = ISERIES_HV_ADDR(pages[1]);
-	ev->event.data.vsp_cmd.sub_data.page[2] = ISERIES_HV_ADDR(pages[2]);
-	ev->event.data.vsp_cmd.sub_data.page[3] = ISERIES_HV_ADDR(pages[3]);
+	ev->event.data.vsp_cmd.sub_data.page[0] = iseries_hv_addr(pages[0]);
+	ev->event.data.vsp_cmd.sub_data.page[1] = iseries_hv_addr(pages[1]);
+	ev->event.data.vsp_cmd.sub_data.page[2] = iseries_hv_addr(pages[2]);
+	ev->event.data.vsp_cmd.sub_data.page[3] = iseries_hv_addr(pages[3]);
 	mb();
 	if (signal_event(ev) != 0)
 		return;
@@ -1279,3 +1284,38 @@ static int __init mf_proc_init(void)
 __initcall(mf_proc_init);
 
 #endif /* CONFIG_PROC_FS */
+
+/*
+ * Get the RTC from the virtual service processor
+ * This requires flowing LpEvents to the primary partition
+ */
+void iSeries_get_rtc_time(struct rtc_time *rtc_tm)
+{
+	if (piranha_simulator)
+		return;
+
+	mf_get_rtc(rtc_tm);
+	rtc_tm->tm_mon--;
+}
+
+/*
+ * Set the RTC in the virtual service processor
+ * This requires flowing LpEvents to the primary partition
+ */
+int iSeries_set_rtc_time(struct rtc_time *tm)
+{
+	mf_set_rtc(tm);
+	return 0;
+}
+
+unsigned long iSeries_get_boot_time(void)
+{
+	struct rtc_time tm;
+
+	if (piranha_simulator)
+		return 0;
+
+	mf_get_boot_rtc(&tm);
+	return mktime(tm.tm_year + 1900, tm.tm_mon, tm.tm_mday,
+		      tm.tm_hour, tm.tm_min, tm.tm_sec);
+}
diff --git a/arch/powerpc/platforms/iseries/misc.S b/arch/powerpc/platforms/iseries/misc.S
new file mode 100644
index 000000000000..dfe7aa1ba098
--- /dev/null
+++ b/arch/powerpc/platforms/iseries/misc.S
@@ -0,0 +1,56 @@
+/*
+ * This file contains miscellaneous low-level functions.
+ *    Copyright (C) 1995-2005 IBM Corp
+ *
+ * Largely rewritten by Cort Dougan (cort@cs.nmt.edu)
+ * and Paul Mackerras.
+ * Adapted for iSeries by Mike Corrigan (mikejc@us.ibm.com)
+ * PPC64 updates by Dave Engebretsen (engebret@us.ibm.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/processor.h>
+#include <asm/asm-offsets.h>
+#include <asm/ppc_asm.h>
+
+	.text
+
+/* unsigned long local_save_flags(void) */
+_GLOBAL(local_get_flags)
+	lbz	r3,PACAPROCENABLED(r13)
+	blr
+
+/* unsigned long local_irq_disable(void) */
+_GLOBAL(local_irq_disable)
+	lbz	r3,PACAPROCENABLED(r13)
+	li	r4,0
+	stb	r4,PACAPROCENABLED(r13)
+	blr			/* Done */
+
+/* void local_irq_restore(unsigned long flags) */
+_GLOBAL(local_irq_restore)
+	lbz	r5,PACAPROCENABLED(r13)
+	 /* Check if things are setup the way we want _already_. */
+	cmpw	0,r3,r5
+	beqlr
+	/* are we enabling interrupts? */
+	cmpdi	0,r3,0
+	stb	r3,PACAPROCENABLED(r13)
+	beqlr
+	/* Check pending interrupts */
+	/*   A decrementer, IPI or PMC interrupt may have occurred
+	 *   while we were in the hypervisor (which enables) */
+	ld	r4,PACALPPACA+LPPACAANYINT(r13)
+	cmpdi	r4,0
+	beqlr
+
+	/*
+	 * Handle pending interrupts in interrupt context
+	 */
+	li	r0,0x5555
+	sc
+	blr
diff --git a/arch/powerpc/platforms/iseries/naca.h b/arch/powerpc/platforms/iseries/naca.h
new file mode 100644
index 000000000000..ab2372eb8d2e
--- /dev/null
+++ b/arch/powerpc/platforms/iseries/naca.h
@@ -0,0 +1,24 @@
+#ifndef _PLATFORMS_ISERIES_NACA_H
+#define _PLATFORMS_ISERIES_NACA_H
+
+/*
+ * c 2001 PPC 64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/types.h>
+
+struct naca_struct {
+	/* Kernel only data - undefined for user space */
+	void *xItVpdAreas;              /* VPD Data                  0x00 */
+	void *xRamDisk;                 /* iSeries ramdisk           0x08 */
+	u64   xRamDiskSize;		/* In pages                  0x10 */
+};
+
+extern struct naca_struct naca;
+
+#endif /* _PLATFORMS_ISERIES_NACA_H */
diff --git a/arch/ppc64/kernel/iSeries_pci.c b/arch/powerpc/platforms/iseries/pci.c
index fbc273c32bcc..dafc518fbb83 100644
--- a/arch/ppc64/kernel/iSeries_pci.c
+++ b/arch/powerpc/platforms/iseries/pci.c
@@ -1,28 +1,26 @@
 /*
- * iSeries_pci.c
- *
  * Copyright (C) 2001 Allan Trautman, IBM Corporation
  *
  * iSeries specific routines for PCI.
- * 
+ *
  * Based on code from pci.c and iSeries_pci.c 32bit
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- * 
+ *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- * 
+ *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 #include <linux/kernel.h>
-#include <linux/list.h> 
+#include <linux/list.h>
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/module.h>
@@ -34,23 +32,24 @@
 #include <asm/prom.h>
 #include <asm/machdep.h>
 #include <asm/pci-bridge.h>
-#include <asm/ppcdebug.h>
 #include <asm/iommu.h>
+#include <asm/abs_addr.h>
 
-#include <asm/iSeries/HvCallPci.h>
-#include <asm/iSeries/HvCallXm.h>
-#include <asm/iSeries/iSeries_irq.h>
-#include <asm/iSeries/iSeries_pci.h>
-#include <asm/iSeries/mf.h>
+#include <asm/iseries/hv_call_xm.h>
+#include <asm/iseries/mf.h>
 
+#include <asm/ppc-pci.h>
+
+#include "irq.h"
 #include "pci.h"
+#include "call_pci.h"
 
 extern unsigned long io_page_mask;
 
 /*
- * Forward declares of prototypes. 
+ * Forward declares of prototypes.
  */
-static struct iSeries_Device_Node *find_Device_Node(int bus, int devfn);
+static struct device_node *find_Device_Node(int bus, int devfn);
 static void scan_PHB_slots(struct pci_controller *Phb);
 static void scan_EADS_bridge(HvBusNumber Bus, HvSubBusNumber SubBus, int IdSel);
 static int scan_bridge_slot(HvBusNumber Bus, struct HvCallPci_BridgeInfo *Info);
@@ -68,7 +67,7 @@ static long Pci_Cfg_Write_Count;
 #endif
 static long Pci_Error_Count;
 
-static int Pci_Retry_Max = 3;	/* Only retry 3 times  */	
+static int Pci_Retry_Max = 3;	/* Only retry 3 times  */
 static int Pci_Error_Flag = 1;	/* Set Retry Error on. */
 
 static struct pci_ops iSeries_pci_ops;
@@ -87,7 +86,7 @@ static long current_iomm_table_entry;
 /*
  * Lookup Tables.
  */
-static struct iSeries_Device_Node **iomm_table;
+static struct device_node **iomm_table;
 static u8 *iobar_table;
 
 /*
@@ -179,7 +178,7 @@ static void allocate_device_bars(struct pci_dev *dev)
 	for (bar_num = 0; bar_num <= PCI_ROM_RESOURCE; ++bar_num) {
 		bar_res = &dev->resource[bar_num];
 		iomm_table_allocate_entry(dev, bar_num);
-    	}
+	}
 }
 
 /*
@@ -201,29 +200,27 @@ static void pci_Log_Error(char *Error_Text, int Bus, int SubBus,
 /*
  * build_device_node(u16 Bus, int SubBus, u8 DevFn)
  */
-static struct iSeries_Device_Node *build_device_node(HvBusNumber Bus,
+static struct device_node *build_device_node(HvBusNumber Bus,
 		HvSubBusNumber SubBus, int AgentId, int Function)
 {
-	struct iSeries_Device_Node *node;
-
-	PPCDBG(PPCDBG_BUSWALK,
-			"-build_device_node 0x%02X.%02X.%02X Function: %02X\n",
-			Bus, SubBus, AgentId, Function);
+	struct device_node *node;
+	struct pci_dn *pdn;
 
-	node = kmalloc(sizeof(struct iSeries_Device_Node), GFP_KERNEL);
+	node = kmalloc(sizeof(struct device_node), GFP_KERNEL);
 	if (node == NULL)
 		return NULL;
-
-	memset(node, 0, sizeof(struct iSeries_Device_Node));
-	list_add_tail(&node->Device_List, &iSeries_Global_Device_List);
-#if 0
-	node->DsaAddr = ((u64)Bus << 48) + ((u64)SubBus << 40) + ((u64)0x10 << 32);
-#endif
-	node->DsaAddr.DsaAddr = 0;
-	node->DsaAddr.Dsa.busNumber = Bus;
-	node->DsaAddr.Dsa.subBusNumber = SubBus;
-	node->DsaAddr.Dsa.deviceId = 0x10;
-	node->DevFn = PCI_DEVFN(ISERIES_ENCODE_DEVICE(AgentId), Function);
+	memset(node, 0, sizeof(struct device_node));
+	pdn = kzalloc(sizeof(*pdn), GFP_KERNEL);
+	if (pdn == NULL) {
+		kfree(node);
+		return NULL;
+	}
+	node->data = pdn;
+	pdn->node = node;
+	list_add_tail(&pdn->Device_List, &iSeries_Global_Device_List);
+	pdn->busno = Bus;
+	pdn->bussubno = SubBus;
+	pdn->devfn = PCI_DEVFN(ISERIES_ENCODE_DEVICE(AgentId), Function);
 	return node;
 }
 
@@ -241,27 +238,21 @@ unsigned long __init find_and_init_phbs(void)
 	struct pci_controller *phb;
 	HvBusNumber bus;
 
-	PPCDBG(PPCDBG_BUSWALK, "find_and_init_phbs Entry\n");
-
 	/* Check all possible buses. */
 	for (bus = 0; bus < 256; bus++) {
 		int ret = HvCallXm_testBus(bus);
 		if (ret == 0) {
 			printk("bus %d appears to exist\n", bus);
 
-			phb = (struct pci_controller *)kmalloc(sizeof(struct pci_controller), GFP_KERNEL);
+			phb = pcibios_alloc_controller(NULL);
 			if (phb == NULL)
 				return -ENOMEM;
-			pci_setup_pci_controller(phb);
 
 			phb->pci_mem_offset = phb->local_number = bus;
 			phb->first_busno = bus;
 			phb->last_busno = bus;
 			phb->ops = &iSeries_pci_ops;
 
-			PPCDBG(PPCDBG_BUSWALK, "PCI:Create iSeries pci_controller(%p), Bus: %04X\n",
-					phb, bus);
-
 			/* Find and connect the devices. */
 			scan_PHB_slots(phb);
 		}
@@ -278,28 +269,24 @@ unsigned long __init find_and_init_phbs(void)
 
 /*
  * iSeries_pcibios_init
- *  
+ *
  * Chance to initialize and structures or variable before PCI Bus walk.
  */
 void iSeries_pcibios_init(void)
 {
-	PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_init Entry.\n"); 
 	iomm_table_initialize();
 	find_and_init_phbs();
 	io_page_mask = -1;
-	PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_init Exit.\n"); 
 }
 
 /*
- * iSeries_pci_final_fixup(void)  
+ * iSeries_pci_final_fixup(void)
  */
 void __init iSeries_pci_final_fixup(void)
 {
 	struct pci_dev *pdev = NULL;
-	struct iSeries_Device_Node *node;
-    	int DeviceCount = 0;
-
-	PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_fixup Entry.\n"); 
+	struct device_node *node;
+	int DeviceCount = 0;
 
 	/* Fix up at the device node and pci_dev relationship */
 	mf_display_src(0xC9000100);
@@ -313,17 +300,14 @@ void __init iSeries_pci_final_fixup(void)
 		if (node != NULL) {
 			++DeviceCount;
 			pdev->sysdata = (void *)node;
-			node->PciDev = pdev;
-			PPCDBG(PPCDBG_BUSWALK,
-					"pdev 0x%p <==> DevNode 0x%p\n",
-					pdev, node);
+			PCI_DN(node)->pcidev = pdev;
 			allocate_device_bars(pdev);
 			iSeries_Device_Information(pdev, DeviceCount);
 			iommu_devnode_init_iSeries(node);
 		} else
 			printk("PCI: Device Tree not found for 0x%016lX\n",
 					(unsigned long)pdev);
-		pdev->irq = node->Irq;
+		pdev->irq = PCI_DN(node)->Irq;
 	}
 	iSeries_activate_IRQs();
 	mf_display_src(0xC9000200);
@@ -331,25 +315,22 @@ void __init iSeries_pci_final_fixup(void)
 
 void pcibios_fixup_bus(struct pci_bus *PciBus)
 {
-	PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_fixup_bus(0x%04X) Entry.\n",
-			PciBus->number); 
 }
 
 void pcibios_fixup_resources(struct pci_dev *pdev)
 {
-	PPCDBG(PPCDBG_BUSWALK, "fixup_resources pdev %p\n", pdev);
-}   
+}
 
 /*
- * Loop through each node function to find usable EADs bridges.  
+ * Loop through each node function to find usable EADs bridges.
  */
 static void scan_PHB_slots(struct pci_controller *Phb)
 {
 	struct HvCallPci_DeviceInfo *DevInfo;
-	HvBusNumber bus = Phb->local_number;	/* System Bus */	
+	HvBusNumber bus = Phb->local_number;	/* System Bus */
 	const HvSubBusNumber SubBus = 0;	/* EADs is always 0. */
 	int HvRc = 0;
-	int IdSel;	
+	int IdSel;
 	const int MaxAgents = 8;
 
 	DevInfo = (struct HvCallPci_DeviceInfo*)
@@ -358,11 +339,11 @@ static void scan_PHB_slots(struct pci_controller *Phb)
 		return;
 
 	/*
-	 * Probe for EADs Bridges      
+	 * Probe for EADs Bridges
 	 */
 	for (IdSel = 1; IdSel < MaxAgents; ++IdSel) {
-    		HvRc = HvCallPci_getDeviceInfo(bus, SubBus, IdSel,
-				ISERIES_HV_ADDR(DevInfo),
+		HvRc = HvCallPci_getDeviceInfo(bus, SubBus, IdSel,
+				iseries_hv_addr(DevInfo),
 				sizeof(struct HvCallPci_DeviceInfo));
 		if (HvRc == 0) {
 			if (DevInfo->deviceType == HvCallPci_NodeDevice)
@@ -393,33 +374,22 @@ static void scan_EADS_bridge(HvBusNumber bus, HvSubBusNumber SubBus,
 
 	/* Note: hvSubBus and irq is always be 0 at this level! */
 	for (Function = 0; Function < 8; ++Function) {
-	  	AgentId = ISERIES_PCI_AGENTID(IdSel, Function);
+		AgentId = ISERIES_PCI_AGENTID(IdSel, Function);
 		HvRc = HvCallXm_connectBusUnit(bus, SubBus, AgentId, 0);
- 		if (HvRc == 0) {
+		if (HvRc == 0) {
 			printk("found device at bus %d idsel %d func %d (AgentId %x)\n",
 			       bus, IdSel, Function, AgentId);
-  			/*  Connect EADs: 0x18.00.12 = 0x00 */
-			PPCDBG(PPCDBG_BUSWALK,
-					"PCI:Connect EADs: 0x%02X.%02X.%02X\n",
-					bus, SubBus, AgentId);
-	    		HvRc = HvCallPci_getBusUnitInfo(bus, SubBus, AgentId,
-					ISERIES_HV_ADDR(BridgeInfo),
+			/*  Connect EADs: 0x18.00.12 = 0x00 */
+			HvRc = HvCallPci_getBusUnitInfo(bus, SubBus, AgentId,
+					iseries_hv_addr(BridgeInfo),
 					sizeof(struct HvCallPci_BridgeInfo));
-	 		if (HvRc == 0) {
+			if (HvRc == 0) {
 				printk("bridge info: type %x subbus %x maxAgents %x maxsubbus %x logslot %x\n",
 					BridgeInfo->busUnitInfo.deviceType,
 					BridgeInfo->subBusNumber,
 					BridgeInfo->maxAgents,
 					BridgeInfo->maxSubBusNumber,
 					BridgeInfo->logicalSlotNumber);
-				PPCDBG(PPCDBG_BUSWALK,
-					"PCI: BridgeInfo, Type:0x%02X, SubBus:0x%02X, MaxAgents:0x%02X, MaxSubBus: 0x%02X, LSlot: 0x%02X\n",
-					BridgeInfo->busUnitInfo.deviceType,
-					BridgeInfo->subBusNumber,
-					BridgeInfo->maxAgents,
-					BridgeInfo->maxSubBusNumber,
-					BridgeInfo->logicalSlotNumber);
-
 				if (BridgeInfo->busUnitInfo.deviceType ==
 						HvCallPci_BridgeDevice)  {
 					/* Scan_Bridge_Slot...: 0x18.00.12 */
@@ -428,7 +398,7 @@ static void scan_EADS_bridge(HvBusNumber bus, HvSubBusNumber SubBus,
 					printk("PCI: Invalid Bridge Configuration(0x%02X)",
 						BridgeInfo->busUnitInfo.deviceType);
 			}
-    		} else if (HvRc != 0x000B)
+		} else if (HvRc != 0x000B)
 			pci_Log_Error("EADs Connect",
 					bus, SubBus, AgentId, HvRc);
 	}
@@ -441,7 +411,7 @@ static void scan_EADS_bridge(HvBusNumber bus, HvSubBusNumber SubBus,
 static int scan_bridge_slot(HvBusNumber Bus,
 		struct HvCallPci_BridgeInfo *BridgeInfo)
 {
-	struct iSeries_Device_Node *node;
+	struct device_node *node;
 	HvSubBusNumber SubBus = BridgeInfo->subBusNumber;
 	u16 VendorId = 0;
 	int HvRc = 0;
@@ -451,16 +421,13 @@ static int scan_bridge_slot(HvBusNumber Bus,
 	HvAgentId EADsIdSel = ISERIES_PCI_AGENTID(IdSel, Function);
 
 	/* iSeries_allocate_IRQ.: 0x18.00.12(0xA3) */
-  	Irq = iSeries_allocate_IRQ(Bus, 0, EADsIdSel);
-	PPCDBG(PPCDBG_BUSWALK,
-		"PCI:- allocate and assign IRQ 0x%02X.%02X.%02X = 0x%02X\n",
-		Bus, 0, EADsIdSel, Irq);
+	Irq = iSeries_allocate_IRQ(Bus, 0, EADsIdSel);
 
 	/*
-	 * Connect all functions of any device found.  
+	 * Connect all functions of any device found.
 	 */
-  	for (IdSel = 1; IdSel <= BridgeInfo->maxAgents; ++IdSel) {
-    		for (Function = 0; Function < 8; ++Function) {
+	for (IdSel = 1; IdSel <= BridgeInfo->maxAgents; ++IdSel) {
+		for (Function = 0; Function < 8; ++Function) {
 			HvAgentId AgentId = ISERIES_PCI_AGENTID(IdSel, Function);
 			HvRc = HvCallXm_connectBusUnit(Bus, SubBus,
 					AgentId, Irq);
@@ -480,19 +447,16 @@ static int scan_bridge_slot(HvBusNumber Bus,
 			printk("read vendor ID: %x\n", VendorId);
 
 			/* FoundDevice: 0x18.28.10 = 0x12AE */
-			PPCDBG(PPCDBG_BUSWALK,
-			       "PCI:- FoundDevice: 0x%02X.%02X.%02X = 0x%04X, irq %d\n",
-			       Bus, SubBus, AgentId, VendorId, Irq);
 			HvRc = HvCallPci_configStore8(Bus, SubBus, AgentId,
-						      PCI_INTERRUPT_LINE, Irq);  
+						      PCI_INTERRUPT_LINE, Irq);
 			if (HvRc != 0)
 				pci_Log_Error("PciCfgStore Irq Failed!",
 					      Bus, SubBus, AgentId, HvRc);
 
 			++DeviceCount;
 			node = build_device_node(Bus, SubBus, EADsIdSel, Function);
-			node->Irq = Irq;
-			node->LogicalSlot = BridgeInfo->logicalSlotNumber;
+			PCI_DN(node)->Irq = Irq;
+			PCI_DN(node)->LogicalSlot = BridgeInfo->logicalSlotNumber;
 
 		} /* for (Function = 0; Function < 8; ++Function) */
 	} /* for (IdSel = 1; IdSel <= MaxAgents; ++IdSel) */
@@ -542,16 +506,13 @@ EXPORT_SYMBOL(iSeries_memcpy_fromio);
 /*
  * Look down the chain to find the matching Device Device
  */
-static struct iSeries_Device_Node *find_Device_Node(int bus, int devfn)
+static struct device_node *find_Device_Node(int bus, int devfn)
 {
-	struct list_head *pos;
-
-	list_for_each(pos, &iSeries_Global_Device_List) {
-		struct iSeries_Device_Node *node =
-			list_entry(pos, struct iSeries_Device_Node, Device_List);
+	struct pci_dn *pdn;
 
-		if ((bus == ISERIES_BUS(node)) && (devfn == node->DevFn))
-			return node;
+	list_for_each_entry(pdn, &iSeries_Global_Device_List, Device_List) {
+		if ((bus == pdn->busno) && (devfn == pdn->devfn))
+			return pdn->node;
 	}
 	return NULL;
 }
@@ -562,12 +523,12 @@ static struct iSeries_Device_Node *find_Device_Node(int bus, int devfn)
  * Sanity Check Node PciDev to passed pci_dev
  * If none is found, returns a NULL which the client must handle.
  */
-static struct iSeries_Device_Node *get_Device_Node(struct pci_dev *pdev)
+static struct device_node *get_Device_Node(struct pci_dev *pdev)
 {
-	struct iSeries_Device_Node *node;
+	struct device_node *node;
 
 	node = pdev->sysdata;
-	if (node == NULL || node->PciDev != pdev)
+	if (node == NULL || PCI_DN(node)->pcidev != pdev)
 		node = find_Device_Node(pdev->bus->number, pdev->devfn);
 	return node;
 }
@@ -595,7 +556,7 @@ static u64 hv_cfg_write_func[4] = {
 static int iSeries_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 		int offset, int size, u32 *val)
 {
-	struct iSeries_Device_Node *node = find_Device_Node(bus->number, devfn);
+	struct device_node *node = find_Device_Node(bus->number, devfn);
 	u64 fn;
 	struct HvCallPci_LoadReturn ret;
 
@@ -607,7 +568,7 @@ static int iSeries_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 	}
 
 	fn = hv_cfg_read_func[(size - 1) & 3];
-	HvCall3Ret16(fn, &ret, node->DsaAddr.DsaAddr, offset, 0);
+	HvCall3Ret16(fn, &ret, iseries_ds_addr(node), offset, 0);
 
 	if (ret.rc != 0) {
 		*val = ~0;
@@ -625,7 +586,7 @@ static int iSeries_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 static int iSeries_pci_write_config(struct pci_bus *bus, unsigned int devfn,
 		int offset, int size, u32 val)
 {
-	struct iSeries_Device_Node *node = find_Device_Node(bus->number, devfn);
+	struct device_node *node = find_Device_Node(bus->number, devfn);
 	u64 fn;
 	u64 ret;
 
@@ -635,7 +596,7 @@ static int iSeries_pci_write_config(struct pci_bus *bus, unsigned int devfn,
 		return PCIBIOS_BAD_REGISTER_NUMBER;
 
 	fn = hv_cfg_write_func[(size - 1) & 3];
-	ret = HvCall4(fn, node->DsaAddr.DsaAddr, offset, val, 0);
+	ret = HvCall4(fn, iseries_ds_addr(node), offset, val, 0);
 
 	if (ret != 0)
 		return PCIBIOS_DEVICE_NOT_FOUND;
@@ -657,14 +618,16 @@ static struct pci_ops iSeries_pci_ops = {
  * PCI: Device 23.90 ReadL Retry( 1)
  * PCI: Device 23.90 ReadL Retry Successful(1)
  */
-static int CheckReturnCode(char *TextHdr, struct iSeries_Device_Node *DevNode,
+static int CheckReturnCode(char *TextHdr, struct device_node *DevNode,
 		int *retry, u64 ret)
 {
 	if (ret != 0)  {
+		struct pci_dn *pdn = PCI_DN(DevNode);
+
 		++Pci_Error_Count;
 		(*retry)++;
 		printk("PCI: %s: Device 0x%04X:%02X  I/O Error(%2d): 0x%04X\n",
-				TextHdr, DevNode->DsaAddr.Dsa.busNumber, DevNode->DevFn,
+				TextHdr, pdn->busno, pdn->devfn,
 				*retry, (int)ret);
 		/*
 		 * Bump the retry and check for retry count exceeded.
@@ -687,14 +650,14 @@ static int CheckReturnCode(char *TextHdr, struct iSeries_Device_Node *DevNode,
  * Note: Make sure the passed variable end up on the stack to avoid
  * the exposure of being device global.
  */
-static inline struct iSeries_Device_Node *xlate_iomm_address(
+static inline struct device_node *xlate_iomm_address(
 		const volatile void __iomem *IoAddress,
 		u64 *dsaptr, u64 *BarOffsetPtr)
 {
 	unsigned long OrigIoAddr;
 	unsigned long BaseIoAddr;
 	unsigned long TableIndex;
-	struct iSeries_Device_Node *DevNode;
+	struct device_node *DevNode;
 
 	OrigIoAddr = (unsigned long __force)IoAddress;
 	if ((OrigIoAddr < BASE_IO_MEMORY) || (OrigIoAddr >= max_io_memory))
@@ -705,7 +668,7 @@ static inline struct iSeries_Device_Node *xlate_iomm_address(
 
 	if (DevNode != NULL) {
 		int barnum = iobar_table[TableIndex];
-		*dsaptr = DevNode->DsaAddr.DsaAddr | (barnum << 24);
+		*dsaptr = iseries_ds_addr(DevNode) | (barnum << 24);
 		*BarOffsetPtr = BaseIoAddr % IOMM_TABLE_ENTRY_SIZE;
 	} else
 		panic("PCI: Invalid PCI IoAddress detected!\n");
@@ -727,7 +690,7 @@ u8 iSeries_Read_Byte(const volatile void __iomem *IoAddress)
 	u64 dsa;
 	int retry = 0;
 	struct HvCallPci_LoadReturn ret;
-	struct iSeries_Device_Node *DevNode =
+	struct device_node *DevNode =
 		xlate_iomm_address(IoAddress, &dsa, &BarOffset);
 
 	if (DevNode == NULL) {
@@ -757,7 +720,7 @@ u16 iSeries_Read_Word(const volatile void __iomem *IoAddress)
 	u64 dsa;
 	int retry = 0;
 	struct HvCallPci_LoadReturn ret;
-	struct iSeries_Device_Node *DevNode =
+	struct device_node *DevNode =
 		xlate_iomm_address(IoAddress, &dsa, &BarOffset);
 
 	if (DevNode == NULL) {
@@ -788,7 +751,7 @@ u32 iSeries_Read_Long(const volatile void __iomem *IoAddress)
 	u64 dsa;
 	int retry = 0;
 	struct HvCallPci_LoadReturn ret;
-	struct iSeries_Device_Node *DevNode =
+	struct device_node *DevNode =
 		xlate_iomm_address(IoAddress, &dsa, &BarOffset);
 
 	if (DevNode == NULL) {
@@ -826,7 +789,7 @@ void iSeries_Write_Byte(u8 data, volatile void __iomem *IoAddress)
 	u64 dsa;
 	int retry = 0;
 	u64 rc;
-	struct iSeries_Device_Node *DevNode =
+	struct device_node *DevNode =
 		xlate_iomm_address(IoAddress, &dsa, &BarOffset);
 
 	if (DevNode == NULL) {
@@ -854,7 +817,7 @@ void iSeries_Write_Word(u16 data, volatile void __iomem *IoAddress)
 	u64 dsa;
 	int retry = 0;
 	u64 rc;
-	struct iSeries_Device_Node *DevNode =
+	struct device_node *DevNode =
 		xlate_iomm_address(IoAddress, &dsa, &BarOffset);
 
 	if (DevNode == NULL) {
@@ -882,7 +845,7 @@ void iSeries_Write_Long(u32 data, volatile void __iomem *IoAddress)
 	u64 dsa;
 	int retry = 0;
 	u64 rc;
-	struct iSeries_Device_Node *DevNode =
+	struct device_node *DevNode =
 		xlate_iomm_address(IoAddress, &dsa, &BarOffset);
 
 	if (DevNode == NULL) {
diff --git a/arch/powerpc/platforms/iseries/pci.h b/arch/powerpc/platforms/iseries/pci.h
new file mode 100644
index 000000000000..33a8489fde54
--- /dev/null
+++ b/arch/powerpc/platforms/iseries/pci.h
@@ -0,0 +1,63 @@
+#ifndef _PLATFORMS_ISERIES_PCI_H
+#define _PLATFORMS_ISERIES_PCI_H
+
+/*
+ * Created by Allan Trautman on Tue Feb 20, 2001.
+ *
+ * Define some useful macros for the iSeries pci routines.
+ * Copyright (C) 2001  Allan H Trautman, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the:
+ * Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330,
+ * Boston, MA  02111-1307  USA
+ *
+ * Change Activity:
+ *   Created Feb 20, 2001
+ *   Added device reset, March 22, 2001
+ *   Ported to ppc64, May 25, 2001
+ * End Change Activity
+ */
+
+#include <asm/pci-bridge.h>
+
+struct pci_dev;				/* For Forward Reference */
+
+/*
+ * Decodes Linux DevFn to iSeries DevFn, bridge device, or function.
+ * For Linux, see PCI_SLOT and PCI_FUNC in include/linux/pci.h
+ */
+
+#define ISERIES_PCI_AGENTID(idsel, func)	\
+	(((idsel & 0x0F) << 4) | (func & 0x07))
+#define ISERIES_ENCODE_DEVICE(agentid)		\
+	((0x10) | ((agentid & 0x20) >> 2) | (agentid & 0x07))
+
+#define ISERIES_GET_DEVICE_FROM_SUBBUS(subbus)		((subbus >> 5) & 0x7)
+#define ISERIES_GET_FUNCTION_FROM_SUBBUS(subbus)	((subbus >> 2) & 0x7)
+
+/*
+ * Generate a Direct Select Address for the Hypervisor
+ */
+static inline u64 iseries_ds_addr(struct device_node *node)
+{
+	struct pci_dn *pdn = PCI_DN(node);
+
+	return ((u64)pdn->busno << 48) + ((u64)pdn->bussubno << 40)
+			+ ((u64)0x10 << 32);
+}
+
+extern void	iSeries_Device_Information(struct pci_dev*, int);
+
+#endif /* _PLATFORMS_ISERIES_PCI_H */
diff --git a/arch/ppc64/kernel/iSeries_proc.c b/arch/powerpc/platforms/iseries/proc.c
index 0fe3116eba29..e68b6b5fa89f 100644
--- a/arch/ppc64/kernel/iSeries_proc.c
+++ b/arch/powerpc/platforms/iseries/proc.c
@@ -1,5 +1,4 @@
 /*
- * iSeries_proc.c
  * Copyright (C) 2001  Kyle A. Lucke IBM Corporation
  * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen IBM Corporation
  *
@@ -25,10 +24,11 @@
 #include <asm/processor.h>
 #include <asm/time.h>
 #include <asm/lppaca.h>
-#include <asm/iSeries/ItLpQueue.h>
-#include <asm/iSeries/HvCallXm.h>
-#include <asm/iSeries/IoHriMainStore.h>
-#include <asm/iSeries/IoHriProcessorVpd.h>
+#include <asm/iseries/it_lp_queue.h>
+#include <asm/iseries/hv_call_xm.h>
+
+#include "processor_vpd.h"
+#include "main_store.h"
 
 static int __init iseries_proc_create(void)
 {
@@ -68,12 +68,15 @@ static int proc_titantod_show(struct seq_file *m, void *v)
 		unsigned long tb_ticks = (tb0 - startTb);
 		unsigned long titan_jiffies = titan_usec / (1000000/HZ);
 		unsigned long titan_jiff_usec = titan_jiffies * (1000000/HZ);
-		unsigned long titan_jiff_rem_usec = titan_usec - titan_jiff_usec;
+		unsigned long titan_jiff_rem_usec =
+			titan_usec - titan_jiff_usec;
 		unsigned long tb_jiffies = tb_ticks / tb_ticks_per_jiffy;
 		unsigned long tb_jiff_ticks = tb_jiffies * tb_ticks_per_jiffy;
 		unsigned long tb_jiff_rem_ticks = tb_ticks - tb_jiff_ticks;
-		unsigned long tb_jiff_rem_usec = tb_jiff_rem_ticks / tb_ticks_per_usec;
-		unsigned long new_tb_ticks_per_jiffy = (tb_ticks * (1000000/HZ))/titan_usec;
+		unsigned long tb_jiff_rem_usec =
+			tb_jiff_rem_ticks / tb_ticks_per_usec;
+		unsigned long new_tb_ticks_per_jiffy =
+			(tb_ticks * (1000000/HZ))/titan_usec;
 
 		seq_printf(m, "  titan elapsed = %lu uSec\n", titan_usec);
 		seq_printf(m, "  tb elapsed    = %lu ticks\n", tb_ticks);
diff --git a/arch/powerpc/platforms/iseries/processor_vpd.h b/arch/powerpc/platforms/iseries/processor_vpd.h
new file mode 100644
index 000000000000..7ac5d0d0dbfa
--- /dev/null
+++ b/arch/powerpc/platforms/iseries/processor_vpd.h
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ISERIES_PROCESSOR_VPD_H
+#define _ISERIES_PROCESSOR_VPD_H
+
+#include <asm/types.h>
+
+/*
+ * This struct maps Processor Vpd that is DMAd to SLIC by CSP
+ */
+struct IoHriProcessorVpd {
+	u8	xFormat;		// VPD format indicator		x00-x00
+	u8	xProcStatus:8;		// Processor State		x01-x01
+	u8	xSecondaryThreadCount;	// Secondary thread cnt		x02-x02
+	u8	xSrcType:1;		// Src Type			x03-x03
+	u8	xSrcSoft:1;		// Src stay soft		...
+	u8	xSrcParable:1;		// Src parable			...
+	u8	xRsvd1:5;		// Reserved			...
+	u16	xHvPhysicalProcIndex;	// Hypervisor physical proc index04-x05
+	u16	xRsvd2;			// Reserved			x06-x07
+	u32	xHwNodeId;		// Hardware node id		x08-x0B
+	u32	xHwProcId;		// Hardware processor id	x0C-x0F
+
+	u32	xTypeNum;		// Card Type/CCIN number	x10-x13
+	u32	xModelNum;		// Model/Feature number		x14-x17
+	u64	xSerialNum;		// Serial number		x18-x1F
+	char	xPartNum[12];		// Book Part or FPU number	x20-x2B
+	char	xMfgID[4];		// Manufacturing ID		x2C-x2F
+
+	u32	xProcFreq;		// Processor Frequency		x30-x33
+	u32	xTimeBaseFreq;		// Time Base Frequency		x34-x37
+
+	u32	xChipEcLevel;		// Chip EC Levels		x38-x3B
+	u32	xProcIdReg;		// PIR SPR value		x3C-x3F
+	u32	xPVR;			// PVR value			x40-x43
+	u8	xRsvd3[12];		// Reserved			x44-x4F
+
+	u32	xInstCacheSize;		// Instruction cache size in KB	x50-x53
+	u32	xInstBlockSize;		// Instruction cache block size	x54-x57
+	u32	xDataCacheOperandSize;	// Data cache operand size	x58-x5B
+	u32	xInstCacheOperandSize;	// Inst cache operand size	x5C-x5F
+
+	u32	xDataL1CacheSizeKB;	// L1 data cache size in KB	x60-x63
+	u32	xDataL1CacheLineSize;	// L1 data cache block size	x64-x67
+	u64	xRsvd4;			// Reserved			x68-x6F
+
+	u32	xDataL2CacheSizeKB;	// L2 data cache size in KB	x70-x73
+	u32	xDataL2CacheLineSize;	// L2 data cache block size	x74-x77
+	u64	xRsvd5;			// Reserved			x78-x7F
+
+	u32	xDataL3CacheSizeKB;	// L3 data cache size in KB	x80-x83
+	u32	xDataL3CacheLineSize;	// L3 data cache block size	x84-x87
+	u64	xRsvd6;			// Reserved			x88-x8F
+
+	u64	xFruLabel;		// Card Location Label		x90-x97
+	u8	xSlotsOnCard;		// Slots on card (0=no slots)	x98-x98
+	u8	xPartLocFlag;		// Location flag (0-pluggable 1-imbedded) x99-x99
+	u16	xSlotMapIndex;		// Index in slot map table	x9A-x9B
+	u8	xSmartCardPortNo;	// Smart card port number	x9C-x9C
+	u8	xRsvd7;			// Reserved			x9D-x9D
+	u16	xFrameIdAndRackUnit;	// Frame ID and rack unit adr	x9E-x9F
+
+	u8	xRsvd8[24];		// Reserved			xA0-xB7
+
+	char	xProcSrc[72];		// CSP format SRC		xB8-xFF
+};
+
+extern struct IoHriProcessorVpd	xIoHriProcessorVpd[];
+
+#endif /* _ISERIES_PROCESSOR_VPD_H */
diff --git a/arch/powerpc/platforms/iseries/release_data.h b/arch/powerpc/platforms/iseries/release_data.h
new file mode 100644
index 000000000000..66189fd2e32d
--- /dev/null
+++ b/arch/powerpc/platforms/iseries/release_data.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ISERIES_RELEASE_DATA_H
+#define _ISERIES_RELEASE_DATA_H
+
+/*
+ * This control block contains the critical information about the
+ * release so that it can be changed in the future (ie, the virtual
+ * address of the OS's NACA).
+ */
+#include <asm/types.h>
+#include "naca.h"
+
+/*
+ * When we IPL a secondary partition, we will check if if the
+ * secondary xMinPlicVrmIndex > the primary xVrmIndex.
+ * If it is then this tells PLIC that this secondary is not
+ * supported running on this "old" of a level of PLIC.
+ *
+ * Likewise, we will compare the primary xMinSlicVrmIndex to
+ * the secondary xVrmIndex.
+ * If the primary xMinSlicVrmDelta > secondary xVrmDelta then we
+ * know that this PLIC does not support running an OS "that old".
+ */
+
+#define	HVREL_TAGSINACTIVE	0x8000
+#define HVREL_32BIT		0x4000
+#define HVREL_NOSHAREDPROCS	0x2000
+#define HVREL_NOHMT		0x1000
+
+struct HvReleaseData {
+	u32	xDesc;		/* Descriptor "HvRD" ebcdic	x00-x03 */
+	u16	xSize;		/* Size of this control block	x04-x05 */
+	u16	xVpdAreasPtrOffset; /* Offset in NACA of ItVpdAreas x06-x07 */
+	struct  naca_struct	*xSlicNacaAddr; /* Virt addr of SLIC NACA x08-x0F */
+	u32	xMsNucDataOffset; /* Offset of Linux Mapping Data x10-x13 */
+	u32	xRsvd1;		/* Reserved			x14-x17 */
+	u16	xFlags;
+	u16	xVrmIndex;	/* VRM Index of OS image	x1A-x1B */
+	u16	xMinSupportedPlicVrmIndex; /* Min PLIC level  (soft) x1C-x1D */
+	u16	xMinCompatablePlicVrmIndex; /* Min PLIC levelP (hard) x1E-x1F */
+	char	xVrmName[12];	/* Displayable name		x20-x2B */
+	char	xRsvd3[20];	/* Reserved			x2C-x3F */
+};
+
+extern struct HvReleaseData	hvReleaseData;
+
+#endif /* _ISERIES_RELEASE_DATA_H */
diff --git a/arch/ppc64/kernel/iSeries_setup.c b/arch/powerpc/platforms/iseries/setup.c
index 3ffefbbc6623..da26639190db 100644
--- a/arch/ppc64/kernel/iSeries_setup.c
+++ b/arch/powerpc/platforms/iseries/setup.c
@@ -2,8 +2,6 @@
  *    Copyright (c) 2000 Mike Corrigan <mikejc@us.ibm.com>
  *    Copyright (c) 1999-2000 Grant Erickson <grant@lcse.umn.edu>
  *
- *    Module name: iSeries_setup.c
- *
  *    Description:
  *      Architecture- / platform-specific boot-time initialization code for
  *      the IBM iSeries LPAR.  Adapted from original code by Grant Erickson and
@@ -29,6 +27,7 @@
 #include <linux/kdev_t.h>
 #include <linux/major.h>
 #include <linux/root_dev.h>
+#include <linux/kernel.h>
 
 #include <asm/processor.h>
 #include <asm/machdep.h>
@@ -40,27 +39,28 @@
 #include <asm/sections.h>
 #include <asm/iommu.h>
 #include <asm/firmware.h>
-
+#include <asm/system.h>
 #include <asm/time.h>
-#include "iSeries_setup.h"
-#include <asm/naca.h>
 #include <asm/paca.h>
 #include <asm/cache.h>
 #include <asm/sections.h>
 #include <asm/abs_addr.h>
-#include <asm/iSeries/HvCallHpt.h>
-#include <asm/iSeries/HvLpConfig.h>
-#include <asm/iSeries/HvCallEvent.h>
-#include <asm/iSeries/HvCallSm.h>
-#include <asm/iSeries/HvCallXm.h>
-#include <asm/iSeries/ItLpQueue.h>
-#include <asm/iSeries/IoHriMainStore.h>
-#include <asm/iSeries/mf.h>
-#include <asm/iSeries/HvLpEvent.h>
-#include <asm/iSeries/iSeries_irq.h>
-#include <asm/iSeries/IoHriProcessorVpd.h>
-#include <asm/iSeries/ItVpdAreas.h>
-#include <asm/iSeries/LparMap.h>
+#include <asm/iseries/hv_lp_config.h>
+#include <asm/iseries/hv_call_event.h>
+#include <asm/iseries/hv_call_xm.h>
+#include <asm/iseries/it_lp_queue.h>
+#include <asm/iseries/mf.h>
+#include <asm/iseries/hv_lp_event.h>
+#include <asm/iseries/lpar_map.h>
+
+#include "naca.h"
+#include "setup.h"
+#include "irq.h"
+#include "vpd_areas.h"
+#include "processor_vpd.h"
+#include "main_store.h"
+#include "call_sm.h"
+#include "call_hpt.h"
 
 extern void hvlog(char *fmt, ...);
 
@@ -71,11 +71,9 @@ extern void hvlog(char *fmt, ...);
 #endif
 
 /* Function Prototypes */
-extern void ppcdbg_initialize(void);
-
-static void build_iSeries_Memory_Map(void);
-static void setup_iSeries_cache_sizes(void);
-static void iSeries_bolt_kernel(unsigned long saddr, unsigned long eaddr);
+static unsigned long build_iSeries_Memory_Map(void);
+static void iseries_shared_idle(void);
+static void iseries_dedicated_idle(void);
 #ifdef CONFIG_PCI
 extern void iSeries_pci_final_fixup(void);
 #else
@@ -83,18 +81,9 @@ static void iSeries_pci_final_fixup(void) { }
 #endif
 
 /* Global Variables */
-static unsigned long procFreqHz;
-static unsigned long procFreqMhz;
-static unsigned long procFreqMhzHundreths;
-
-static unsigned long tbFreqHz;
-static unsigned long tbFreqMhz;
-static unsigned long tbFreqMhzHundreths;
-
 int piranha_simulator;
 
 extern int rd_size;		/* Defined in drivers/block/rd.c */
-extern unsigned long klimit;
 extern unsigned long embedded_sysmap_start;
 extern unsigned long embedded_sysmap_end;
 
@@ -103,6 +92,8 @@ extern unsigned long iSeries_recal_titan;
 
 static int mf_initialized;
 
+static unsigned long cmd_mem_limit;
+
 struct MemoryBlock {
 	unsigned long absStart;
 	unsigned long absEnd;
@@ -311,13 +302,11 @@ static void __init iSeries_get_cmdline(void)
 
 static void __init iSeries_init_early(void)
 {
-	extern unsigned long memory_limit;
-
 	DBG(" -> iSeries_init_early()\n");
 
 	ppc64_firmware_features = FW_FEATURE_ISERIES;
 
-	ppcdbg_initialize();
+	ppc64_interrupt_controller = IC_ISERIES;
 
 #if defined(CONFIG_BLK_DEV_INITRD)
 	/*
@@ -326,11 +315,11 @@ static void __init iSeries_init_early(void)
 	 */
 	if (naca.xRamDisk) {
 		initrd_start = (unsigned long)__va(naca.xRamDisk);
-		initrd_end = initrd_start + naca.xRamDiskSize * PAGE_SIZE;
+		initrd_end = initrd_start + naca.xRamDiskSize * HW_PAGE_SIZE;
 		initrd_below_start_ok = 1;	// ramdisk in kernel space
 		ROOT_DEV = Root_RAM0;
-		if (((rd_size * 1024) / PAGE_SIZE) < naca.xRamDiskSize)
-			rd_size = (naca.xRamDiskSize * PAGE_SIZE) / 1024;
+		if (((rd_size * 1024) / HW_PAGE_SIZE) < naca.xRamDiskSize)
+			rd_size = (naca.xRamDiskSize * HW_PAGE_SIZE) / 1024;
 	} else
 #endif /* CONFIG_BLK_DEV_INITRD */
 	{
@@ -341,12 +330,6 @@ static void __init iSeries_init_early(void)
 	iSeries_recal_titan = HvCallXm_loadTod();
 
 	/*
-	 * Cache sizes must be initialized before hpte_init_iSeries is called
-	 * as the later need them for flush_icache_range()
-	 */
-	setup_iSeries_cache_sizes();
-
-	/*
 	 * Initialize the hash table management pointers
 	 */
 	hpte_init_iSeries();
@@ -356,37 +339,6 @@ static void __init iSeries_init_early(void)
 	 */
 	iommu_init_early_iSeries();
 
-	/*
-	 * Initialize the table which translate Linux physical addresses to
-	 * AS/400 absolute addresses
-	 */
-	build_iSeries_Memory_Map();
-
-	iSeries_get_cmdline();
-
-	/* Save unparsed command line copy for /proc/cmdline */
-	strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE);
-
-	/* Parse early parameters, in particular mem=x */
-	parse_early_param();
-
-	if (memory_limit) {
-		if (memory_limit < systemcfg->physicalMemorySize)
-			systemcfg->physicalMemorySize = memory_limit;
-		else {
-			printk("Ignoring mem=%lu >= ram_top.\n", memory_limit);
-			memory_limit = 0;
-		}
-	}
-
-	/* Bolt kernel mappings for all of memory (or just a bit if we've got a limit) */
-	iSeries_bolt_kernel(0, systemcfg->physicalMemorySize);
-
-	lmb_init();
-	lmb_add(0, systemcfg->physicalMemorySize);
-	lmb_analyze();
-	lmb_reserve(0, __pa(klimit));
-
 	/* Initialize machine-dependency vectors */
 #ifdef CONFIG_SMP
 	smp_init_iSeries();
@@ -450,14 +402,15 @@ void mschunks_alloc(unsigned long num_chunks)
  * a table used to translate Linux's physical addresses to these
  * absolute addresses.  Absolute addresses are needed when
  * communicating with the hypervisor (e.g. to build HPT entries)
+ *
+ * Returns the physical memory size
  */
 
-static void __init build_iSeries_Memory_Map(void)
+static unsigned long __init build_iSeries_Memory_Map(void)
 {
 	u32 loadAreaFirstChunk, loadAreaLastChunk, loadAreaSize;
 	u32 nextPhysChunk;
 	u32 hptFirstChunk, hptLastChunk, hptSizeChunks, hptSizePages;
-	u32 num_ptegs;
 	u32 totalChunks,moreChunks;
 	u32 currChunk, thisChunk, absChunk;
 	u32 currDword;
@@ -514,16 +467,14 @@ static void __init build_iSeries_Memory_Map(void)
 	 */
 	hptFirstChunk = (u32)addr_to_chunk(HvCallHpt_getHptAddress());
 	hptSizePages = (u32)HvCallHpt_getHptPages();
-	hptSizeChunks = hptSizePages >> (MSCHUNKS_CHUNK_SHIFT - PAGE_SHIFT);
+	hptSizeChunks = hptSizePages >>
+		(MSCHUNKS_CHUNK_SHIFT - HW_PAGE_SHIFT);
 	hptLastChunk = hptFirstChunk + hptSizeChunks - 1;
 
 	printk("HPT absolute addr = %016lx, size = %dK\n",
 			chunk_to_addr(hptFirstChunk), hptSizeChunks * 256);
 
-	/* Fill in the hashed page table hash mask */
-	num_ptegs = hptSizePages *
-		(PAGE_SIZE / (sizeof(hpte_t) * HPTES_PER_GROUP));
-	htab_hash_mask = num_ptegs - 1;
+	ppc64_pft_size = __ilog2(hptSizePages * HW_PAGE_SIZE);
 
 	/*
 	 * The actual hashed page table is in the hypervisor,
@@ -588,104 +539,7 @@ static void __init build_iSeries_Memory_Map(void)
 	 * which should be equal to
 	 *   nextPhysChunk
 	 */
-	systemcfg->physicalMemorySize = chunk_to_addr(nextPhysChunk);
-}
-
-/*
- * Set up the variables that describe the cache line sizes
- * for this machine.
- */
-static void __init setup_iSeries_cache_sizes(void)
-{
-	unsigned int i, n;
-	unsigned int procIx = get_paca()->lppaca.dyn_hv_phys_proc_index;
-
-	systemcfg->icache_size =
-	ppc64_caches.isize = xIoHriProcessorVpd[procIx].xInstCacheSize * 1024;
-	systemcfg->icache_line_size =
-	ppc64_caches.iline_size =
-		xIoHriProcessorVpd[procIx].xInstCacheOperandSize;
-	systemcfg->dcache_size =
-	ppc64_caches.dsize =
-		xIoHriProcessorVpd[procIx].xDataL1CacheSizeKB * 1024;
-	systemcfg->dcache_line_size =
-	ppc64_caches.dline_size =
-		xIoHriProcessorVpd[procIx].xDataCacheOperandSize;
-	ppc64_caches.ilines_per_page = PAGE_SIZE / ppc64_caches.iline_size;
-	ppc64_caches.dlines_per_page = PAGE_SIZE / ppc64_caches.dline_size;
-
-	i = ppc64_caches.iline_size;
-	n = 0;
-	while ((i = (i / 2)))
-		++n;
-	ppc64_caches.log_iline_size = n;
-
-	i = ppc64_caches.dline_size;
-	n = 0;
-	while ((i = (i / 2)))
-		++n;
-	ppc64_caches.log_dline_size = n;
-
-	printk("D-cache line size = %d\n",
-			(unsigned int)ppc64_caches.dline_size);
-	printk("I-cache line size = %d\n",
-			(unsigned int)ppc64_caches.iline_size);
-}
-
-/*
- * Create a pte. Used during initialization only.
- */
-static void iSeries_make_pte(unsigned long va, unsigned long pa,
-			     int mode)
-{
-	hpte_t local_hpte, rhpte;
-	unsigned long hash, vpn;
-	long slot;
-
-	vpn = va >> PAGE_SHIFT;
-	hash = hpt_hash(vpn, 0);
-
-	local_hpte.r = pa | mode;
-	local_hpte.v = ((va >> 23) << HPTE_V_AVPN_SHIFT)
-		| HPTE_V_BOLTED | HPTE_V_VALID;
-
-	slot = HvCallHpt_findValid(&rhpte, vpn);
-	if (slot < 0) {
-		/* Must find space in primary group */
-		panic("hash_page: hpte already exists\n");
-	}
-	HvCallHpt_addValidate(slot, 0, &local_hpte);
-}
-
-/*
- * Bolt the kernel addr space into the HPT
- */
-static void __init iSeries_bolt_kernel(unsigned long saddr, unsigned long eaddr)
-{
-	unsigned long pa;
-	unsigned long mode_rw = _PAGE_ACCESSED | _PAGE_COHERENT | PP_RWXX;
-	hpte_t hpte;
-
-	for (pa = saddr; pa < eaddr ;pa += PAGE_SIZE) {
-		unsigned long ea = (unsigned long)__va(pa);
-		unsigned long vsid = get_kernel_vsid(ea);
-		unsigned long va = (vsid << 28) | (pa & 0xfffffff);
-		unsigned long vpn = va >> PAGE_SHIFT;
-		unsigned long slot = HvCallHpt_findValid(&hpte, vpn);
-
-		/* Make non-kernel text non-executable */
-		if (!in_kernel_text(ea))
-			mode_rw |= HW_NO_EXEC;
-
-		if (hpte.v & HPTE_V_VALID) {
-			/* HPTE exists, so just bolt it */
-			HvCallHpt_setSwBits(slot, 0x10, 0);
-			/* And make sure the pp bits are correct */
-			HvCallHpt_setPp(slot, PP_RWXX);
-		} else
-			/* No HPTE exists, so create a new bolted one */
-			iSeries_make_pte(va, phys_to_abs(pa), mode_rw);
-	}
+	return chunk_to_addr(nextPhysChunk);
 }
 
 /*
@@ -693,43 +547,24 @@ static void __init iSeries_bolt_kernel(unsigned long saddr, unsigned long eaddr)
  */
 static void __init iSeries_setup_arch(void)
 {
-	unsigned procIx = get_paca()->lppaca.dyn_hv_phys_proc_index;
-
-	/* Add an eye catcher and the systemcfg layout version number */
-	strcpy(systemcfg->eye_catcher, "SYSTEMCFG:PPC64");
-	systemcfg->version.major = SYSTEMCFG_MAJOR;
-	systemcfg->version.minor = SYSTEMCFG_MINOR;
+	if (get_paca()->lppaca.shared_proc) {
+		ppc_md.idle_loop = iseries_shared_idle;
+		printk(KERN_INFO "Using shared processor idle loop\n");
+	} else {
+		ppc_md.idle_loop = iseries_dedicated_idle;
+		printk(KERN_INFO "Using dedicated idle loop\n");
+	}
 
 	/* Setup the Lp Event Queue */
 	setup_hvlpevent_queue();
 
-	/* Compute processor frequency */
-	procFreqHz = ((1UL << 34) * 1000000) /
-			xIoHriProcessorVpd[procIx].xProcFreq;
-	procFreqMhz = procFreqHz / 1000000;
-	procFreqMhzHundreths = (procFreqHz / 10000) - (procFreqMhz * 100);
-	ppc_proc_freq = procFreqHz;
-
-	/* Compute time base frequency */
-	tbFreqHz = ((1UL << 32) * 1000000) /
-		xIoHriProcessorVpd[procIx].xTimeBaseFreq;
-	tbFreqMhz = tbFreqHz / 1000000;
-	tbFreqMhzHundreths = (tbFreqHz / 10000) - (tbFreqMhz * 100);
-	ppc_tb_freq = tbFreqHz;
-
 	printk("Max  logical processors = %d\n",
 			itVpdAreas.xSlicMaxLogicalProcs);
 	printk("Max physical processors = %d\n",
 			itVpdAreas.xSlicMaxPhysicalProcs);
-	printk("Processor frequency = %lu.%02lu\n", procFreqMhz,
-			procFreqMhzHundreths);
-	printk("Time base frequency = %lu.%02lu\n", tbFreqMhz,
-			tbFreqMhzHundreths);
-	systemcfg->processor = xIoHriProcessorVpd[procIx].xPVR;
-	printk("Processor version = %x\n", systemcfg->processor);
 }
 
-static void iSeries_get_cpuinfo(struct seq_file *m)
+static void iSeries_show_cpuinfo(struct seq_file *m)
 {
 	seq_printf(m, "machine\t\t: 64-bit iSeries Logical Partition\n");
 }
@@ -768,49 +603,6 @@ static void iSeries_halt(void)
 	mf_power_off();
 }
 
-/*
- * void __init iSeries_calibrate_decr()
- *
- * Description:
- *   This routine retrieves the internal processor frequency from the VPD,
- *   and sets up the kernel timer decrementer based on that value.
- *
- */
-static void __init iSeries_calibrate_decr(void)
-{
-	unsigned long	cyclesPerUsec;
-	struct div_result divres;
-
-	/* Compute decrementer (and TB) frequency in cycles/sec */
-	cyclesPerUsec = ppc_tb_freq / 1000000;
-
-	/*
-	 * Set the amount to refresh the decrementer by.  This
-	 * is the number of decrementer ticks it takes for
-	 * 1/HZ seconds.
-	 */
-	tb_ticks_per_jiffy = ppc_tb_freq / HZ;
-
-#if 0
-	/* TEST CODE FOR ADJTIME */
-	tb_ticks_per_jiffy += tb_ticks_per_jiffy / 5000;
-	/* END OF TEST CODE */
-#endif
-
-	/*
-	 * tb_ticks_per_sec = freq; would give better accuracy
-	 * but tb_ticks_per_sec = tb_ticks_per_jiffy*HZ; assures
-	 * that jiffies (and xtime) will match the time returned
-	 * by do_gettimeofday.
-	 */
-	tb_ticks_per_sec = tb_ticks_per_jiffy * HZ;
-	tb_ticks_per_usec = cyclesPerUsec;
-	tb_to_us = mulhwu_scale_factor(ppc_tb_freq, 1000000);
-	div128_by_32(1024 * 1024, 0, tb_ticks_per_sec, &divres);
-	tb_to_xs = divres.result_low;
-	setup_default_decr();
-}
-
 static void __init iSeries_progress(char * st, unsigned short code)
 {
 	printk("Progress: [%04x] - %s\n", (unsigned)code, st);
@@ -830,7 +622,7 @@ static void __init iSeries_fixup_klimit(void)
 	 */
 	if (naca.xRamDisk)
 		klimit = KERNELBASE + (u64)naca.xRamDisk +
-			(naca.xRamDiskSize * PAGE_SIZE);
+			(naca.xRamDiskSize * HW_PAGE_SIZE);
 	else {
 		/*
 		 * No ram disk was included - check and see if there
@@ -878,7 +670,7 @@ static void yield_shared_processor(void)
 	process_iSeries_events();
 }
 
-static int iseries_shared_idle(void)
+static void iseries_shared_idle(void)
 {
 	while (1) {
 		while (!need_resched() && !hvlpevent_is_pending()) {
@@ -898,22 +690,18 @@ static int iseries_shared_idle(void)
 		if (hvlpevent_is_pending())
 			process_iSeries_events();
 
+		preempt_enable_no_resched();
 		schedule();
+		preempt_disable();
 	}
-
-	return 0;
 }
 
-static int iseries_dedicated_idle(void)
+static void iseries_dedicated_idle(void)
 {
-	long oldval;
+	set_thread_flag(TIF_POLLING_NRFLAG);
 
 	while (1) {
-		oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED);
-
-		if (!oldval) {
-			set_thread_flag(TIF_POLLING_NRFLAG);
-
+		if (!need_resched()) {
 			while (!need_resched()) {
 				ppc64_runlatch_off();
 				HMT_low();
@@ -926,52 +714,283 @@ static int iseries_dedicated_idle(void)
 			}
 
 			HMT_medium();
-			clear_thread_flag(TIF_POLLING_NRFLAG);
-		} else {
-			set_need_resched();
 		}
 
 		ppc64_runlatch_on();
+		preempt_enable_no_resched();
 		schedule();
+		preempt_disable();
 	}
-
-	return 0;
 }
 
 #ifndef CONFIG_PCI
 void __init iSeries_init_IRQ(void) { }
 #endif
 
-void __init iSeries_early_setup(void)
+static int __init iseries_probe(int platform)
 {
-	iSeries_fixup_klimit();
+	return PLATFORM_ISERIES_LPAR == platform;
+}
+
+struct machdep_calls __initdata iseries_md = {
+	.setup_arch	= iSeries_setup_arch,
+	.show_cpuinfo	= iSeries_show_cpuinfo,
+	.init_IRQ	= iSeries_init_IRQ,
+	.get_irq	= iSeries_get_irq,
+	.init_early	= iSeries_init_early,
+	.pcibios_fixup	= iSeries_pci_final_fixup,
+	.restart	= iSeries_restart,
+	.power_off	= iSeries_power_off,
+	.halt		= iSeries_halt,
+	.get_boot_time	= iSeries_get_boot_time,
+	.set_rtc_time	= iSeries_set_rtc_time,
+	.get_rtc_time	= iSeries_get_rtc_time,
+	.calibrate_decr	= generic_calibrate_decr,
+	.progress	= iSeries_progress,
+	.probe		= iseries_probe,
+	/* XXX Implement enable_pmcs for iSeries */
+};
 
-	ppc_md.setup_arch = iSeries_setup_arch;
-	ppc_md.get_cpuinfo = iSeries_get_cpuinfo;
-	ppc_md.init_IRQ = iSeries_init_IRQ;
-	ppc_md.get_irq = iSeries_get_irq;
-	ppc_md.init_early = iSeries_init_early,
+struct blob {
+	unsigned char data[PAGE_SIZE];
+	unsigned long next;
+};
 
-	ppc_md.pcibios_fixup  = iSeries_pci_final_fixup;
+struct iseries_flat_dt {
+	struct boot_param_header header;
+	u64 reserve_map[2];
+	struct blob dt;
+	struct blob strings;
+};
 
-	ppc_md.restart = iSeries_restart;
-	ppc_md.power_off = iSeries_power_off;
-	ppc_md.halt = iSeries_halt;
+struct iseries_flat_dt iseries_dt;
 
-	ppc_md.get_boot_time = iSeries_get_boot_time;
-	ppc_md.set_rtc_time = iSeries_set_rtc_time;
-	ppc_md.get_rtc_time = iSeries_get_rtc_time;
-	ppc_md.calibrate_decr = iSeries_calibrate_decr;
-	ppc_md.progress = iSeries_progress;
+void dt_init(struct iseries_flat_dt *dt)
+{
+	dt->header.off_mem_rsvmap =
+		offsetof(struct iseries_flat_dt, reserve_map);
+	dt->header.off_dt_struct = offsetof(struct iseries_flat_dt, dt);
+	dt->header.off_dt_strings = offsetof(struct iseries_flat_dt, strings);
+	dt->header.totalsize = sizeof(struct iseries_flat_dt);
+	dt->header.dt_strings_size = sizeof(struct blob);
 
-	/* XXX Implement enable_pmcs for iSeries */
+	/* There is no notion of hardware cpu id on iSeries */
+	dt->header.boot_cpuid_phys = smp_processor_id();
 
-	if (get_paca()->lppaca.shared_proc) {
-		ppc_md.idle_loop = iseries_shared_idle;
-		printk(KERN_INFO "Using shared processor idle loop\n");
-	} else {
-		ppc_md.idle_loop = iseries_dedicated_idle;
-		printk(KERN_INFO "Using dedicated idle loop\n");
+	dt->dt.next = (unsigned long)&dt->dt.data;
+	dt->strings.next = (unsigned long)&dt->strings.data;
+
+	dt->header.magic = OF_DT_HEADER;
+	dt->header.version = 0x10;
+	dt->header.last_comp_version = 0x10;
+
+	dt->reserve_map[0] = 0;
+	dt->reserve_map[1] = 0;
+}
+
+void dt_check_blob(struct blob *b)
+{
+	if (b->next >= (unsigned long)&b->next) {
+		DBG("Ran out of space in flat device tree blob!\n");
+		BUG();
+	}
+}
+
+void dt_push_u32(struct iseries_flat_dt *dt, u32 value)
+{
+	*((u32*)dt->dt.next) = value;
+	dt->dt.next += sizeof(u32);
+
+	dt_check_blob(&dt->dt);
+}
+
+void dt_push_u64(struct iseries_flat_dt *dt, u64 value)
+{
+	*((u64*)dt->dt.next) = value;
+	dt->dt.next += sizeof(u64);
+
+	dt_check_blob(&dt->dt);
+}
+
+unsigned long dt_push_bytes(struct blob *blob, char *data, int len)
+{
+	unsigned long start = blob->next - (unsigned long)blob->data;
+
+	memcpy((char *)blob->next, data, len);
+	blob->next = _ALIGN(blob->next + len, 4);
+
+	dt_check_blob(blob);
+
+	return start;
+}
+
+void dt_start_node(struct iseries_flat_dt *dt, char *name)
+{
+	dt_push_u32(dt, OF_DT_BEGIN_NODE);
+	dt_push_bytes(&dt->dt, name, strlen(name) + 1);
+}
+
+#define dt_end_node(dt) dt_push_u32(dt, OF_DT_END_NODE)
+
+void dt_prop(struct iseries_flat_dt *dt, char *name, char *data, int len)
+{
+	unsigned long offset;
+
+	dt_push_u32(dt, OF_DT_PROP);
+
+	/* Length of the data */
+	dt_push_u32(dt, len);
+
+	/* Put the property name in the string blob. */
+	offset = dt_push_bytes(&dt->strings, name, strlen(name) + 1);
+
+	/* The offset of the properties name in the string blob. */
+	dt_push_u32(dt, (u32)offset);
+
+	/* The actual data. */
+	dt_push_bytes(&dt->dt, data, len);
+}
+
+void dt_prop_str(struct iseries_flat_dt *dt, char *name, char *data)
+{
+	dt_prop(dt, name, data, strlen(data) + 1); /* + 1 for NULL */
+}
+
+void dt_prop_u32(struct iseries_flat_dt *dt, char *name, u32 data)
+{
+	dt_prop(dt, name, (char *)&data, sizeof(u32));
+}
+
+void dt_prop_u64(struct iseries_flat_dt *dt, char *name, u64 data)
+{
+	dt_prop(dt, name, (char *)&data, sizeof(u64));
+}
+
+void dt_prop_u64_list(struct iseries_flat_dt *dt, char *name, u64 *data, int n)
+{
+	dt_prop(dt, name, (char *)data, sizeof(u64) * n);
+}
+
+void dt_prop_empty(struct iseries_flat_dt *dt, char *name)
+{
+	dt_prop(dt, name, NULL, 0);
+}
+
+void dt_cpus(struct iseries_flat_dt *dt)
+{
+	unsigned char buf[32];
+	unsigned char *p;
+	unsigned int i, index;
+	struct IoHriProcessorVpd *d;
+
+	/* yuck */
+	snprintf(buf, 32, "PowerPC,%s", cur_cpu_spec->cpu_name);
+	p = strchr(buf, ' ');
+	if (!p) p = buf + strlen(buf);
+
+	dt_start_node(dt, "cpus");
+	dt_prop_u32(dt, "#address-cells", 1);
+	dt_prop_u32(dt, "#size-cells", 0);
+
+	for (i = 0; i < NR_CPUS; i++) {
+		if (paca[i].lppaca.dyn_proc_status >= 2)
+			continue;
+
+		snprintf(p, 32 - (p - buf), "@%d", i);
+		dt_start_node(dt, buf);
+
+		dt_prop_str(dt, "device_type", "cpu");
+
+		index = paca[i].lppaca.dyn_hv_phys_proc_index;
+		d = &xIoHriProcessorVpd[index];
+
+		dt_prop_u32(dt, "i-cache-size", d->xInstCacheSize * 1024);
+		dt_prop_u32(dt, "i-cache-line-size", d->xInstCacheOperandSize);
+
+		dt_prop_u32(dt, "d-cache-size", d->xDataL1CacheSizeKB * 1024);
+		dt_prop_u32(dt, "d-cache-line-size", d->xDataCacheOperandSize);
+
+		/* magic conversions to Hz copied from old code */
+		dt_prop_u32(dt, "clock-frequency",
+			((1UL << 34) * 1000000) / d->xProcFreq);
+		dt_prop_u32(dt, "timebase-frequency",
+			((1UL << 32) * 1000000) / d->xTimeBaseFreq);
+
+		dt_prop_u32(dt, "reg", i);
+
+		dt_end_node(dt);
 	}
+
+	dt_end_node(dt);
+}
+
+void build_flat_dt(struct iseries_flat_dt *dt, unsigned long phys_mem_size)
+{
+	u64 tmp[2];
+
+	dt_init(dt);
+
+	dt_start_node(dt, "");
+
+	dt_prop_u32(dt, "#address-cells", 2);
+	dt_prop_u32(dt, "#size-cells", 2);
+
+	/* /memory */
+	dt_start_node(dt, "memory@0");
+	dt_prop_str(dt, "name", "memory");
+	dt_prop_str(dt, "device_type", "memory");
+	tmp[0] = 0;
+	tmp[1] = phys_mem_size;
+	dt_prop_u64_list(dt, "reg", tmp, 2);
+	dt_end_node(dt);
+
+	/* /chosen */
+	dt_start_node(dt, "chosen");
+	dt_prop_u32(dt, "linux,platform", PLATFORM_ISERIES_LPAR);
+	if (cmd_mem_limit)
+		dt_prop_u64(dt, "linux,memory-limit", cmd_mem_limit);
+	dt_end_node(dt);
+
+	dt_cpus(dt);
+
+	dt_end_node(dt);
+
+	dt_push_u32(dt, OF_DT_END);
+}
+
+void * __init iSeries_early_setup(void)
+{
+	unsigned long phys_mem_size;
+
+	iSeries_fixup_klimit();
+
+	/*
+	 * Initialize the table which translate Linux physical addresses to
+	 * AS/400 absolute addresses
+	 */
+	phys_mem_size = build_iSeries_Memory_Map();
+
+	iSeries_get_cmdline();
+
+	/* Save unparsed command line copy for /proc/cmdline */
+	strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE);
+
+	/* Parse early parameters, in particular mem=x */
+	parse_early_param();
+
+	build_flat_dt(&iseries_dt, phys_mem_size);
+
+	return (void *) __pa(&iseries_dt);
 }
 
+/*
+ * On iSeries we just parse the mem=X option from the command line.
+ * On pSeries it's a bit more complicated, see prom_init_mem()
+ */
+static int __init early_parsemem(char *p)
+{
+	if (p)
+		cmd_mem_limit = ALIGN(memparse(p, &p), PAGE_SIZE);
+	return 0;
+}
+early_param("mem", early_parsemem);
diff --git a/arch/ppc64/kernel/iSeries_setup.h b/arch/powerpc/platforms/iseries/setup.h
index c6eb29a245ac..5213044ec411 100644
--- a/arch/ppc64/kernel/iSeries_setup.h
+++ b/arch/powerpc/platforms/iseries/setup.h
@@ -2,8 +2,6 @@
  *    Copyright (c) 2000 Mike Corrigan <mikejc@us.ibm.com>
  *    Copyright (c) 1999-2000 Grant Erickson <grant@lcse.umn.edu>
  *
- *    Module name: as400_setup.h
- *
  *    Description:
  *      Architecture- / platform-specific boot-time initialization code for
  *      the IBM AS/400 LPAR. Adapted from original code by Grant Erickson and
@@ -19,7 +17,7 @@
 #ifndef	__ISERIES_SETUP_H__
 #define	__ISERIES_SETUP_H__
 
-extern void iSeries_get_boot_time(struct rtc_time *tm);
+extern unsigned long iSeries_get_boot_time(void);
 extern int iSeries_set_rtc_time(struct rtc_time *tm);
 extern void iSeries_get_rtc_time(struct rtc_time *tm);
 
diff --git a/arch/ppc64/kernel/iSeries_smp.c b/arch/powerpc/platforms/iseries/smp.c
index f74386e31638..fcb094ec6aec 100644
--- a/arch/ppc64/kernel/iSeries_smp.c
+++ b/arch/powerpc/platforms/iseries/smp.c
@@ -38,26 +38,25 @@
 #include <asm/io.h>
 #include <asm/smp.h>
 #include <asm/paca.h>
-#include <asm/iSeries/HvCall.h>
+#include <asm/iseries/hv_call.h>
 #include <asm/time.h>
-#include <asm/ppcdebug.h>
 #include <asm/machdep.h>
 #include <asm/cputable.h>
 #include <asm/system.h>
 
 static unsigned long iSeries_smp_message[NR_CPUS];
 
-void iSeries_smp_message_recv( struct pt_regs * regs )
+void iSeries_smp_message_recv(struct pt_regs *regs)
 {
 	int cpu = smp_processor_id();
 	int msg;
 
-	if ( num_online_cpus() < 2 )
+	if (num_online_cpus() < 2)
 		return;
 
-	for ( msg = 0; msg < 4; ++msg )
-		if ( test_and_clear_bit( msg, &iSeries_smp_message[cpu] ) )
-			smp_message_recv( msg, regs );
+	for (msg = 0; msg < 4; msg++)
+		if (test_and_clear_bit(msg, &iSeries_smp_message[cpu]))
+			smp_message_recv(msg, regs);
 }
 
 static inline void smp_iSeries_do_message(int cpu, int msg)
@@ -74,48 +73,22 @@ static void smp_iSeries_message_pass(int target, int msg)
 		smp_iSeries_do_message(target, msg);
 	else {
 		for_each_online_cpu(i) {
-			if (target == MSG_ALL_BUT_SELF
-			    && i == smp_processor_id())
+			if ((target == MSG_ALL_BUT_SELF) &&
+					(i == smp_processor_id()))
 				continue;
 			smp_iSeries_do_message(i, msg);
 		}
 	}
 }
 
-static int smp_iSeries_numProcs(void)
-{
-	unsigned np, i;
-
-	np = 0;
-        for (i=0; i < NR_CPUS; ++i) {
-                if (paca[i].lppaca.dyn_proc_status < 2) {
-			cpu_set(i, cpu_possible_map);
-			cpu_set(i, cpu_present_map);
-			cpu_set(i, cpu_sibling_map[i]);
-                        ++np;
-                }
-        }
-	return np;
-}
-
 static int smp_iSeries_probe(void)
 {
-	unsigned i;
-	unsigned np = 0;
-
-	for (i=0; i < NR_CPUS; ++i) {
-		if (paca[i].lppaca.dyn_proc_status < 2) {
-			/*paca[i].active = 1;*/
-			++np;
-		}
-	}
-
-	return np;
+	return cpus_weight(cpu_possible_map);
 }
 
 static void smp_iSeries_kick_cpu(int nr)
 {
-	BUG_ON(nr < 0 || nr >= NR_CPUS);
+	BUG_ON((nr < 0) || (nr >= NR_CPUS));
 
 	/* Verify that our partition has a processor nr */
 	if (paca[nr].lppaca.dyn_proc_status >= 2)
@@ -144,6 +117,4 @@ static struct smp_ops_t iSeries_smp_ops = {
 void __init smp_init_iSeries(void)
 {
 	smp_ops = &iSeries_smp_ops;
-	systemcfg->processorCount	= smp_iSeries_numProcs();
 }
-
diff --git a/arch/powerpc/platforms/iseries/spcomm_area.h b/arch/powerpc/platforms/iseries/spcomm_area.h
new file mode 100644
index 000000000000..6e3b685115c9
--- /dev/null
+++ b/arch/powerpc/platforms/iseries/spcomm_area.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _ISERIES_SPCOMM_AREA_H
+#define _ISERIES_SPCOMM_AREA_H
+
+
+struct SpCommArea {
+	u32	xDesc;			// Descriptor (only in new formats)	000-003
+	u8	xFormat;		// Format (only in new formats)		004-004
+	u8	xRsvd1[11];		// Reserved				005-00F
+	u64	xRawTbAtIplStart;	// Raw HW TB value when IPL is started	010-017
+	u64	xRawTodAtIplStart;	// Raw HW TOD value when IPL is started	018-01F
+	u64	xBcdTimeAtIplStart;	// BCD time when IPL is started		020-027
+	u64	xBcdTimeAtOsStart;	// BCD time when OS passed control	028-02F
+	u8	xRsvd2[80];		// Reserved				030-07F
+};
+
+extern struct SpCommArea xSpCommArea;
+
+#endif /* _ISERIES_SPCOMM_AREA_H */
diff --git a/arch/ppc64/kernel/iSeries_vio.c b/arch/powerpc/platforms/iseries/vio.c
index 6b754b0c8344..384360ee06ec 100644
--- a/arch/ppc64/kernel/iSeries_vio.c
+++ b/arch/powerpc/platforms/iseries/vio.c
@@ -14,12 +14,13 @@
 
 #include <asm/vio.h>
 #include <asm/iommu.h>
+#include <asm/tce.h>
 #include <asm/abs_addr.h>
 #include <asm/page.h>
-#include <asm/iSeries/vio.h>
-#include <asm/iSeries/HvTypes.h>
-#include <asm/iSeries/HvLpConfig.h>
-#include <asm/iSeries/HvCallXm.h>
+#include <asm/iseries/vio.h>
+#include <asm/iseries/hv_types.h>
+#include <asm/iseries/hv_lp_config.h>
+#include <asm/iseries/hv_call_xm.h>
 
 struct device *iSeries_vio_dev = &vio_bus_device.dev;
 EXPORT_SYMBOL(iSeries_vio_dev);
@@ -29,41 +30,14 @@ static struct iommu_table vio_iommu_table;
 
 static void __init iommu_vio_init(void)
 {
-	struct iommu_table *t;
-	struct iommu_table_cb cb;
-	unsigned long cbp;
-	unsigned long itc_entries;
+	iommu_table_getparms_iSeries(255, 0, 0xff, &veth_iommu_table);
+	veth_iommu_table.it_size /= 2;
+	vio_iommu_table = veth_iommu_table;
+	vio_iommu_table.it_offset += veth_iommu_table.it_size;
 
-	cb.itc_busno = 255;    /* Bus 255 is the virtual bus */
-	cb.itc_virtbus = 0xff; /* Ask for virtual bus */
-
-	cbp = virt_to_abs(&cb);
-	HvCallXm_getTceTableParms(cbp);
-
-	itc_entries = cb.itc_size * PAGE_SIZE / sizeof(union tce_entry);
-	veth_iommu_table.it_size        = itc_entries / 2;
-	veth_iommu_table.it_busno       = cb.itc_busno;
-	veth_iommu_table.it_offset      = cb.itc_offset;
-	veth_iommu_table.it_index       = cb.itc_index;
-	veth_iommu_table.it_type        = TCE_VB;
-	veth_iommu_table.it_blocksize	= 1;
-
-	t = iommu_init_table(&veth_iommu_table);
-
-	if (!t)
+	if (!iommu_init_table(&veth_iommu_table))
 		printk("Virtual Bus VETH TCE table failed.\n");
-
-	vio_iommu_table.it_size         = itc_entries - veth_iommu_table.it_size;
-	vio_iommu_table.it_busno        = cb.itc_busno;
-	vio_iommu_table.it_offset       = cb.itc_offset +
-					  veth_iommu_table.it_size;
-	vio_iommu_table.it_index        = cb.itc_index;
-	vio_iommu_table.it_type         = TCE_VB;
-	vio_iommu_table.it_blocksize	= 1;
-
-	t = iommu_init_table(&vio_iommu_table);
-
-	if (!t)
+	if (!iommu_init_table(&vio_iommu_table))
 		printk("Virtual Bus VIO TCE table failed.\n");
 }
 
diff --git a/arch/ppc64/kernel/viopath.c b/arch/powerpc/platforms/iseries/viopath.c
index 2a6c4f01c45e..842672695598 100644
--- a/arch/ppc64/kernel/viopath.c
+++ b/arch/powerpc/platforms/iseries/viopath.c
@@ -1,5 +1,4 @@
 /* -*- linux-c -*-
- *  arch/ppc64/kernel/viopath.c
  *
  *  iSeries Virtual I/O Message Path code
  *
@@ -7,7 +6,7 @@
  *           Ryan Arnold <ryanarn@us.ibm.com>
  *           Colin Devilbiss <devilbis@us.ibm.com>
  *
- * (C) Copyright 2000-2003 IBM Corporation
+ * (C) Copyright 2000-2005 IBM Corporation
  *
  * This code is used by the iSeries virtual disk, cd,
  * tape, and console to communicate with OS/400 in another
@@ -42,12 +41,12 @@
 
 #include <asm/system.h>
 #include <asm/uaccess.h>
-#include <asm/iSeries/HvTypes.h>
-#include <asm/iSeries/ItExtVpdPanel.h>
-#include <asm/iSeries/HvLpEvent.h>
-#include <asm/iSeries/HvLpConfig.h>
-#include <asm/iSeries/mf.h>
-#include <asm/iSeries/vio.h>
+#include <asm/iseries/hv_types.h>
+#include <asm/iseries/it_exp_vpd_panel.h>
+#include <asm/iseries/hv_lp_event.h>
+#include <asm/iseries/hv_lp_config.h>
+#include <asm/iseries/mf.h>
+#include <asm/iseries/vio.h>
 
 /* Status of the path to each other partition in the system.
  * This is overkill, since we will only ever establish connections
@@ -69,7 +68,8 @@ static DEFINE_SPINLOCK(statuslock);
  * For each kind of event we allocate a buffer that is
  * guaranteed not to cross a page boundary
  */
-static unsigned char event_buffer[VIO_MAX_SUBTYPES * 256] __page_aligned;
+static unsigned char event_buffer[VIO_MAX_SUBTYPES * 256]
+	__attribute__((__aligned__(4096)));
 static atomic_t event_buffer_available[VIO_MAX_SUBTYPES];
 static int event_buffer_initialised;
 
@@ -117,12 +117,12 @@ static int proc_viopath_show(struct seq_file *m, void *v)
 	HvLpEvent_Rc hvrc;
 	DECLARE_MUTEX_LOCKED(Semaphore);
 
-	buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+	buf = kmalloc(HW_PAGE_SIZE, GFP_KERNEL);
 	if (!buf)
 		return 0;
-	memset(buf, 0, PAGE_SIZE);
+	memset(buf, 0, HW_PAGE_SIZE);
 
-	handle = dma_map_single(iSeries_vio_dev, buf, PAGE_SIZE,
+	handle = dma_map_single(iSeries_vio_dev, buf, HW_PAGE_SIZE,
 				DMA_FROM_DEVICE);
 
 	hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp,
@@ -132,7 +132,7 @@ static int proc_viopath_show(struct seq_file *m, void *v)
 			viopath_sourceinst(viopath_hostLp),
 			viopath_targetinst(viopath_hostLp),
 			(u64)(unsigned long)&Semaphore, VIOVERSION << 16,
-			((u64)handle) << 32, PAGE_SIZE, 0, 0);
+			((u64)handle) << 32, HW_PAGE_SIZE, 0, 0);
 
 	if (hvrc != HvLpEvent_Rc_Good)
 		printk(VIOPATH_KERN_WARN "hv error on op %d\n", (int)hvrc);
@@ -141,7 +141,7 @@ static int proc_viopath_show(struct seq_file *m, void *v)
 
 	vlanMap = HvLpConfig_getVirtualLanIndexMap();
 
-	buf[PAGE_SIZE-1] = '\0';
+	buf[HW_PAGE_SIZE-1] = '\0';
 	seq_printf(m, "%s", buf);
 	seq_printf(m, "AVAILABLE_VETH=%x\n", vlanMap);
 	seq_printf(m, "SRLNBR=%c%c%c%c%c%c%c\n",
@@ -153,7 +153,8 @@ static int proc_viopath_show(struct seq_file *m, void *v)
 		   e2a(xItExtVpdPanel.systemSerial[4]),
 		   e2a(xItExtVpdPanel.systemSerial[5]));
 
-	dma_unmap_single(iSeries_vio_dev, handle, PAGE_SIZE, DMA_FROM_DEVICE);
+	dma_unmap_single(iSeries_vio_dev, handle, HW_PAGE_SIZE,
+			 DMA_FROM_DEVICE);
 	kfree(buf);
 
 	return 0;
diff --git a/arch/powerpc/platforms/iseries/vpd_areas.h b/arch/powerpc/platforms/iseries/vpd_areas.h
new file mode 100644
index 000000000000..601e6dd860ed
--- /dev/null
+++ b/arch/powerpc/platforms/iseries/vpd_areas.h
@@ -0,0 +1,88 @@
+/*
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ISERIES_VPD_AREAS_H
+#define _ISERIES_VPD_AREAS_H
+
+/*
+ * This file defines the address and length of all of the VPD area passed to
+ * the OS from PLIC (most of which start from the SP).
+ */
+
+#include <asm/types.h>
+
+/* VPD Entry index is carved in stone - cannot be changed (easily). */
+#define ItVpdCecVpd				0
+#define ItVpdDynamicSpace			1
+#define ItVpdExtVpd				2
+#define ItVpdExtVpdOnPanel			3
+#define ItVpdFirstPaca				4
+#define ItVpdIoVpd				5
+#define ItVpdIplParms				6
+#define ItVpdMsVpd				7
+#define ItVpdPanelVpd				8
+#define ItVpdLpNaca				9
+#define ItVpdBackplaneAndMaybeClockCardVpd	10
+#define ItVpdRecoveryLogBuffer			11
+#define ItVpdSpCommArea				12
+#define ItVpdSpLogBuffer			13
+#define ItVpdSpLogBufferSave			14
+#define ItVpdSpCardVpd				15
+#define ItVpdFirstProcVpd			16
+#define ItVpdApModelVpd				17
+#define ItVpdClockCardVpd			18
+#define ItVpdBusExtCardVpd			19
+#define ItVpdProcCapacityVpd			20
+#define ItVpdInteractiveCapacityVpd		21
+#define ItVpdFirstSlotLabel			22
+#define ItVpdFirstLpQueue			23
+#define ItVpdFirstL3CacheVpd			24
+#define ItVpdFirstProcFruVpd			25
+
+#define ItVpdMaxEntries				26
+
+#define ItDmaMaxEntries				10
+
+#define ItVpdAreasMaxSlotLabels			192
+
+
+struct ItVpdAreas {
+	u32	xSlicDesc;		// Descriptor			000-003
+	u16	xSlicSize;		// Size of this control block	004-005
+	u16	xPlicAdjustVpdLens:1;	// Flag to indicate new interface006-007
+	u16	xRsvd1:15;		// Reserved bits		...
+	u16	xSlicVpdEntries;	// Number of VPD entries	008-009
+	u16	xSlicDmaEntries;	// Number of DMA entries	00A-00B
+	u16	xSlicMaxLogicalProcs;	// Maximum logical processors	00C-00D
+	u16	xSlicMaxPhysicalProcs;	// Maximum physical processors	00E-00F
+	u16	xSlicDmaToksOffset;	// Offset into this of array	010-011
+	u16	xSlicVpdAdrsOffset;	// Offset into this of array	012-013
+	u16	xSlicDmaLensOffset;	// Offset into this of array	014-015
+	u16	xSlicVpdLensOffset;	// Offset into this of array	016-017
+	u16	xSlicMaxSlotLabels;	// Maximum number of slot labels018-019
+	u16	xSlicMaxLpQueues;	// Maximum number of LP Queues	01A-01B
+	u8	xRsvd2[4];		// Reserved			01C-01F
+	u64	xRsvd3[12];		// Reserved			020-07F
+	u32	xPlicDmaLens[ItDmaMaxEntries];// Array of DMA lengths	080-0A7
+	u32	xPlicDmaToks[ItDmaMaxEntries];// Array of DMA tokens	0A8-0CF
+	u32	xSlicVpdLens[ItVpdMaxEntries];// Array of VPD lengths	0D0-12F
+	void	*xSlicVpdAdrs[ItVpdMaxEntries];// Array of VPD buffers	130-1EF
+};
+
+extern struct ItVpdAreas	itVpdAreas;
+
+#endif /* _ISERIES_VPD_AREAS_H */
diff --git a/arch/ppc64/kernel/iSeries_VpdInfo.c b/arch/powerpc/platforms/iseries/vpdinfo.c
index 5d921792571f..23a6d1e5b429 100644
--- a/arch/ppc64/kernel/iSeries_VpdInfo.c
+++ b/arch/powerpc/platforms/iseries/vpdinfo.c
@@ -1,6 +1,4 @@
 /*
- * File iSeries_vpdInfo.c created by Allan Trautman on Fri Feb  2 2001.
- *
  * This code gets the card location of the hardware
  * Copyright (C) 2001  <Allan H Trautman> <IBM Corp>
  * Copyright (C) 2005  Stephen Rothwel, IBM Corp
@@ -29,12 +27,15 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/pci.h>
+
 #include <asm/types.h>
 #include <asm/resource.h>
+#include <asm/abs_addr.h>
+#include <asm/pci-bridge.h>
+#include <asm/iseries/hv_types.h>
 
-#include <asm/iSeries/HvCallPci.h>
-#include <asm/iSeries/HvTypes.h>
-#include <asm/iSeries/iSeries_pci.h>
+#include "pci.h"
+#include "call_pci.h"
 
 /*
  * Size of Bus VPD data
@@ -214,7 +215,7 @@ static void __init iSeries_Get_Location_Code(u16 bus, HvAgentId agent,
 		printk("PCI: Bus VPD Buffer allocation failure.\n");
 		return;
 	}
-	BusVpdLen = HvCallPci_getBusVpd(bus, ISERIES_HV_ADDR(BusVpdPtr),
+	BusVpdLen = HvCallPci_getBusVpd(bus, iseries_hv_addr(BusVpdPtr),
 					BUS_VPDSIZE);
 	if (BusVpdLen == 0) {
 		printk("PCI: Bus VPD Buffer zero length.\n");
@@ -242,7 +243,8 @@ out_free:
  */
 void __init iSeries_Device_Information(struct pci_dev *PciDev, int count)
 {
-	struct iSeries_Device_Node *DevNode = PciDev->sysdata;
+	struct device_node *DevNode = PciDev->sysdata;
+	struct pci_dn *pdn;
 	u16 bus;
 	u8 frame;
 	char card[4];
@@ -255,8 +257,9 @@ void __init iSeries_Device_Information(struct pci_dev *PciDev, int count)
 		return;
 	}
 
-	bus = ISERIES_BUS(DevNode);
-	subbus = ISERIES_SUBBUS(DevNode);
+	pdn = PCI_DN(DevNode);
+	bus = pdn->busno;
+	subbus = pdn->bussubno;
 	agent = ISERIES_PCI_AGENTID(ISERIES_GET_DEVICE_FROM_SUBBUS(subbus),
 			ISERIES_GET_FUNCTION_FROM_SUBBUS(subbus));
 	iSeries_Get_Location_Code(bus, agent, &frame, card);
diff --git a/arch/powerpc/platforms/maple/Makefile b/arch/powerpc/platforms/maple/Makefile
new file mode 100644
index 000000000000..1be1a993c5f5
--- /dev/null
+++ b/arch/powerpc/platforms/maple/Makefile
@@ -0,0 +1 @@
+obj-y	+= setup.o pci.o time.o
diff --git a/arch/powerpc/platforms/maple/maple.h b/arch/powerpc/platforms/maple/maple.h
new file mode 100644
index 000000000000..0657c579b840
--- /dev/null
+++ b/arch/powerpc/platforms/maple/maple.h
@@ -0,0 +1,12 @@
+/*
+ * Declarations for maple-specific code.
+ *
+ * Maple is the name of a PPC970 evaluation board.
+ */
+extern int maple_set_rtc_time(struct rtc_time *tm);
+extern void maple_get_rtc_time(struct rtc_time *tm);
+extern unsigned long maple_get_boot_time(void);
+extern void maple_calibrate_decr(void);
+extern void maple_pci_init(void);
+extern void maple_pcibios_fixup(void);
+extern int maple_pci_get_legacy_ide_irq(struct pci_dev *dev, int channel);
diff --git a/arch/ppc64/kernel/maple_pci.c b/arch/powerpc/platforms/maple/pci.c
index 1d297e0edfc0..f40451da037c 100644
--- a/arch/ppc64/kernel/maple_pci.c
+++ b/arch/powerpc/platforms/maple/pci.c
@@ -23,8 +23,9 @@
 #include <asm/pci-bridge.h>
 #include <asm/machdep.h>
 #include <asm/iommu.h>
+#include <asm/ppc-pci.h>
 
-#include "pci.h"
+#include "maple.h"
 
 #ifdef DEBUG
 #define DBG(x...) printk(x)
@@ -276,7 +277,7 @@ static void __init setup_u3_agp(struct pci_controller* hose)
 {
 	/* On G5, we move AGP up to high bus number so we don't need
 	 * to reassign bus numbers for HT. If we ever have P2P bridges
-	 * on AGP, we'll have to move pci_assign_all_busses to the
+	 * on AGP, we'll have to move pci_assign_all_buses to the
 	 * pci_controller structure so we enable it for AGP and not for
 	 * HT childs.
 	 * We hard code the address because of the different size of
@@ -325,26 +326,12 @@ static int __init add_bridge(struct device_node *dev)
 		dev->full_name);
 	}
 
-	hose = alloc_bootmem(sizeof(struct pci_controller));
+	hose = pcibios_alloc_controller(dev);
 	if (hose == NULL)
 		return -ENOMEM;
-	pci_setup_pci_controller(hose);
-
-	hose->arch_data = dev;
 	hose->first_busno = bus_range ? bus_range[0] : 0;
 	hose->last_busno = bus_range ? bus_range[1] : 0xff;
 
-	of_prop = alloc_bootmem(sizeof(struct property) +
-				sizeof(hose->global_number));
-	if (of_prop) {
-		memset(of_prop, 0, sizeof(struct property));
-		of_prop->name = "linux,pci-domain";
-		of_prop->length = sizeof(hose->global_number);
-		of_prop->value = (unsigned char *)&of_prop[1];
-		memcpy(of_prop->value, &hose->global_number, sizeof(hose->global_number));
-		prom_add_property(dev, of_prop);
-	}
-
 	disp_name = NULL;
 	if (device_is_compatible(dev, "u3-agp")) {
 		setup_u3_agp(hose);
@@ -360,7 +347,7 @@ static int __init add_bridge(struct device_node *dev)
 
 	/* Interpret the "ranges" property */
 	/* This also maps the I/O region and sets isa_io/mem_base */
-	pci_process_bridge_OF_ranges(hose, dev);
+	pci_process_bridge_OF_ranges(hose, dev, primary);
 	pci_setup_phb_io(hose, primary);
 
 	/* Fixup "bus-range" OF property */
@@ -379,9 +366,6 @@ void __init maple_pcibios_fixup(void)
 	for_each_pci_dev(dev)
 		pci_read_irq_line(dev);
 
-	/* Do the mapping of the IO space */
-	phbs_remap_io();
-
 	DBG(" <- maple_pcibios_fixup\n");
 }
 
diff --git a/arch/ppc64/kernel/maple_setup.c b/arch/powerpc/platforms/maple/setup.c
index fc0567498a3a..7ece8983a105 100644
--- a/arch/ppc64/kernel/maple_setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -1,5 +1,5 @@
 /*
- *  arch/ppc64/kernel/maple_setup.c
+ *  Maple (970 eval board) setup code
  *
  *  (c) Copyright 2004 Benjamin Herrenschmidt (benh@kernel.crashing.org),
  *                     IBM Corp. 
@@ -59,8 +59,10 @@
 #include <asm/time.h>
 #include <asm/of_device.h>
 #include <asm/lmb.h>
+#include <asm/mpic.h>
+#include <asm/udbg.h>
 
-#include "mpic.h"
+#include "maple.h"
 
 #ifdef DEBUG
 #define DBG(fmt...) udbg_printf(fmt)
@@ -68,13 +70,6 @@
 #define DBG(fmt...)
 #endif
 
-extern int maple_set_rtc_time(struct rtc_time *tm);
-extern void maple_get_rtc_time(struct rtc_time *tm);
-extern void maple_get_boot_time(struct rtc_time *tm);
-extern void maple_calibrate_decr(void);
-extern void maple_pci_init(void);
-extern void maple_pcibios_fixup(void);
-extern int maple_pci_get_legacy_ide_irq(struct pci_dev *dev, int channel);
 extern void generic_find_legacy_serial_ports(u64 *physport,
 		unsigned int *default_speed);
 
diff --git a/arch/ppc64/kernel/maple_time.c b/arch/powerpc/platforms/maple/time.c
index d65210abcd03..15846cc938ac 100644
--- a/arch/ppc64/kernel/maple_time.c
+++ b/arch/powerpc/platforms/maple/time.c
@@ -36,6 +36,8 @@
 #include <asm/machdep.h>
 #include <asm/time.h>
 
+#include "maple.h"
+
 #ifdef DEBUG
 #define DBG(x...) printk(x)
 #else
@@ -156,8 +158,14 @@ int maple_set_rtc_time(struct rtc_time *tm)
 	return 0;
 }
 
-void __init maple_get_boot_time(struct rtc_time *tm)
+static struct resource rtc_iores = {
+	.name = "rtc",
+	.flags = IORESOURCE_BUSY,
+};
+
+unsigned long __init maple_get_boot_time(void)
 {
+	struct rtc_time tm;
 	struct device_node *rtcs;
 
 	rtcs = find_compatible_devices("rtc", "pnpPNP,b00");
@@ -169,7 +177,13 @@ void __init maple_get_boot_time(struct rtc_time *tm)
 		printk(KERN_INFO "Maple: No device node for RTC, assuming "
 		       "legacy address (0x%x)\n", maple_rtc_addr);
 	}
-	
-	maple_get_rtc_time(tm);
+
+	rtc_iores.start = maple_rtc_addr;
+	rtc_iores.end = maple_rtc_addr + 7;
+	request_resource(&ioport_resource, &rtc_iores);
+
+	maple_get_rtc_time(&tm);
+	return mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday,
+		      tm.tm_hour, tm.tm_min, tm.tm_sec);
 }
 
diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile
new file mode 100644
index 000000000000..c9df44fcf571
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/Makefile
@@ -0,0 +1,9 @@
+obj-y				+= pic.o setup.o time.o feature.o pci.o \
+				   sleep.o low_i2c.o cache.o
+obj-$(CONFIG_PMAC_BACKLIGHT)	+= backlight.o
+obj-$(CONFIG_CPU_FREQ_PMAC)	+= cpufreq_32.o
+obj-$(CONFIG_CPU_FREQ_PMAC64)	+= cpufreq_64.o
+obj-$(CONFIG_NVRAM)		+= nvram.o
+# ppc64 pmac doesn't define CONFIG_NVRAM but needs nvram stuff
+obj-$(CONFIG_PPC64)		+= nvram.o
+obj-$(CONFIG_SMP)		+= smp.o
diff --git a/arch/powerpc/platforms/powermac/backlight.c b/arch/powerpc/platforms/powermac/backlight.c
new file mode 100644
index 000000000000..8be2f7d071f0
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/backlight.c
@@ -0,0 +1,202 @@
+/*
+ * Miscellaneous procedures for dealing with the PowerMac hardware.
+ * Contains support for the backlight.
+ *
+ *   Copyright (C) 2000 Benjamin Herrenschmidt
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/stddef.h>
+#include <linux/reboot.h>
+#include <linux/nvram.h>
+#include <linux/console.h>
+#include <asm/sections.h>
+#include <asm/ptrace.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/nvram.h>
+#include <asm/backlight.h>
+
+#include <linux/adb.h>
+#include <linux/pmu.h>
+
+static struct backlight_controller *backlighter;
+static void* backlighter_data;
+static int backlight_autosave;
+static int backlight_level = BACKLIGHT_MAX;
+static int backlight_enabled = 1;
+static int backlight_req_level = -1;
+static int backlight_req_enable = -1;
+
+static void backlight_callback(void *);
+static DECLARE_WORK(backlight_work, backlight_callback, NULL);
+
+void register_backlight_controller(struct backlight_controller *ctrler,
+					  void *data, char *type)
+{
+	struct device_node* bk_node;
+	char *prop;
+	int valid = 0;
+
+	/* There's already a matching controller, bail out */
+	if (backlighter != NULL)
+		return;
+
+	bk_node = find_devices("backlight");
+
+#ifdef CONFIG_ADB_PMU
+	/* Special case for the old PowerBook since I can't test on it */
+	backlight_autosave = machine_is_compatible("AAPL,3400/2400")
+		|| machine_is_compatible("AAPL,3500");
+	if ((backlight_autosave
+	     || machine_is_compatible("AAPL,PowerBook1998")
+	     || machine_is_compatible("PowerBook1,1"))
+	    && !strcmp(type, "pmu"))
+		valid = 1;
+#endif
+	if (bk_node) {
+		prop = get_property(bk_node, "backlight-control", NULL);
+		if (prop && !strncmp(prop, type, strlen(type)))
+			valid = 1;
+	}
+	if (!valid)
+		return;
+	backlighter = ctrler;
+	backlighter_data = data;
+
+	if (bk_node && !backlight_autosave)
+		prop = get_property(bk_node, "bklt", NULL);
+	else
+		prop = NULL;
+	if (prop) {
+		backlight_level = ((*prop)+1) >> 1;
+		if (backlight_level > BACKLIGHT_MAX)
+			backlight_level = BACKLIGHT_MAX;
+	}
+
+#ifdef CONFIG_ADB_PMU
+	if (backlight_autosave) {
+		struct adb_request req;
+		pmu_request(&req, NULL, 2, 0xd9, 0);
+		while (!req.complete)
+			pmu_poll();
+		backlight_level = req.reply[0] >> 4;
+	}
+#endif
+	acquire_console_sem();
+	if (!backlighter->set_enable(1, backlight_level, data))
+		backlight_enabled = 1;
+	release_console_sem();
+
+	printk(KERN_INFO "Registered \"%s\" backlight controller,"
+	       "level: %d/15\n", type, backlight_level);
+}
+EXPORT_SYMBOL(register_backlight_controller);
+
+void unregister_backlight_controller(struct backlight_controller
+					    *ctrler, void *data)
+{
+	/* We keep the current backlight level (for now) */
+	if (ctrler == backlighter && data == backlighter_data)
+		backlighter = NULL;
+}
+EXPORT_SYMBOL(unregister_backlight_controller);
+
+static int __set_backlight_enable(int enable)
+{
+	int rc;
+
+	if (!backlighter)
+		return -ENODEV;
+	acquire_console_sem();
+	rc = backlighter->set_enable(enable, backlight_level,
+				     backlighter_data);
+	if (!rc)
+		backlight_enabled = enable;
+	release_console_sem();
+	return rc;
+}
+int set_backlight_enable(int enable)
+{
+	if (!backlighter)
+		return -ENODEV;
+	backlight_req_enable = enable;
+	schedule_work(&backlight_work);
+	return 0;
+}
+
+EXPORT_SYMBOL(set_backlight_enable);
+
+int get_backlight_enable(void)
+{
+	if (!backlighter)
+		return -ENODEV;
+	return backlight_enabled;
+}
+EXPORT_SYMBOL(get_backlight_enable);
+
+static int __set_backlight_level(int level)
+{
+	int rc = 0;
+
+	if (!backlighter)
+		return -ENODEV;
+	if (level < BACKLIGHT_MIN)
+		level = BACKLIGHT_OFF;
+	if (level > BACKLIGHT_MAX)
+		level = BACKLIGHT_MAX;
+	acquire_console_sem();
+	if (backlight_enabled)
+		rc = backlighter->set_level(level, backlighter_data);
+	if (!rc)
+		backlight_level = level;
+	release_console_sem();
+	if (!rc && !backlight_autosave) {
+		level <<=1;
+		if (level & 0x10)
+			level |= 0x01;
+		// -- todo: save to property "bklt"
+	}
+	return rc;
+}
+int set_backlight_level(int level)
+{
+	if (!backlighter)
+		return -ENODEV;
+	backlight_req_level = level;
+	schedule_work(&backlight_work);
+	return 0;
+}
+
+EXPORT_SYMBOL(set_backlight_level);
+
+int get_backlight_level(void)
+{
+	if (!backlighter)
+		return -ENODEV;
+	return backlight_level;
+}
+EXPORT_SYMBOL(get_backlight_level);
+
+static void backlight_callback(void *dummy)
+{
+	int level, enable;
+
+	do {
+		level = backlight_req_level;
+		enable = backlight_req_enable;
+		mb();
+
+		if (level >= 0)
+			__set_backlight_level(level);
+		if (enable >= 0)
+			__set_backlight_enable(enable);
+	} while(cmpxchg(&backlight_req_level, level, -1) != level ||
+		cmpxchg(&backlight_req_enable, enable, -1) != enable);
+}
diff --git a/arch/powerpc/platforms/powermac/cache.S b/arch/powerpc/platforms/powermac/cache.S
new file mode 100644
index 000000000000..fb977de6b704
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/cache.S
@@ -0,0 +1,359 @@
+/*
+ * This file contains low-level cache management functions
+ * used for sleep and CPU speed changes on Apple machines.
+ * (In fact the only thing that is Apple-specific is that we assume
+ * that we can read from ROM at physical address 0xfff00000.)
+ *
+ *    Copyright (C) 2004 Paul Mackerras (paulus@samba.org) and
+ *                       Benjamin Herrenschmidt (benh@kernel.crashing.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/ppc_asm.h>
+#include <asm/cputable.h>
+
+/*
+ * Flush and disable all data caches (dL1, L2, L3). This is used
+ * when going to sleep, when doing a PMU based cpufreq transition,
+ * or when "offlining" a CPU on SMP machines. This code is over
+ * paranoid, but I've had enough issues with various CPU revs and
+ * bugs that I decided it was worth beeing over cautious
+ */
+
+_GLOBAL(flush_disable_caches)
+#ifndef CONFIG_6xx
+	blr
+#else
+BEGIN_FTR_SECTION
+	b	flush_disable_745x
+END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450)
+BEGIN_FTR_SECTION
+	b	flush_disable_75x
+END_FTR_SECTION_IFSET(CPU_FTR_L2CR)
+	b	__flush_disable_L1
+
+/* This is the code for G3 and 74[01]0 */
+flush_disable_75x:
+	mflr	r10
+
+	/* Turn off EE and DR in MSR */
+	mfmsr	r11
+	rlwinm	r0,r11,0,~MSR_EE
+	rlwinm	r0,r0,0,~MSR_DR
+	sync
+	mtmsr	r0
+	isync
+
+	/* Stop DST streams */
+BEGIN_FTR_SECTION
+	DSSALL
+	sync
+END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+
+	/* Stop DPM */
+	mfspr	r8,SPRN_HID0		/* Save SPRN_HID0 in r8 */
+	rlwinm	r4,r8,0,12,10		/* Turn off HID0[DPM] */
+	sync
+	mtspr	SPRN_HID0,r4		/* Disable DPM */
+	sync
+
+	/* Disp-flush L1. We have a weird problem here that I never
+	 * totally figured out. On 750FX, using the ROM for the flush
+	 * results in a non-working flush. We use that workaround for
+	 * now until I finally understand what's going on. --BenH
+	 */
+
+	/* ROM base by default */
+	lis	r4,0xfff0
+	mfpvr	r3
+	srwi	r3,r3,16
+	cmplwi	cr0,r3,0x7000
+	bne+	1f
+	/* RAM base on 750FX */
+	li	r4,0
+1:	li	r4,0x4000
+	mtctr	r4
+1:	lwz	r0,0(r4)
+	addi	r4,r4,32
+	bdnz	1b
+	sync
+	isync
+
+	/* Disable / invalidate / enable L1 data */
+	mfspr	r3,SPRN_HID0
+	rlwinm	r3,r3,0,~(HID0_DCE | HID0_ICE)
+	mtspr	SPRN_HID0,r3
+	sync
+	isync
+	ori	r3,r3,(HID0_DCE|HID0_DCI|HID0_ICE|HID0_ICFI)
+	sync
+	isync
+	mtspr	SPRN_HID0,r3
+	xori	r3,r3,(HID0_DCI|HID0_ICFI)
+	mtspr	SPRN_HID0,r3
+	sync
+
+	/* Get the current enable bit of the L2CR into r4 */
+	mfspr	r5,SPRN_L2CR
+	/* Set to data-only (pre-745x bit) */
+	oris	r3,r5,L2CR_L2DO@h
+	b	2f
+	/* When disabling L2, code must be in L1 */
+	.balign 32
+1:	mtspr	SPRN_L2CR,r3
+3:	sync
+	isync
+	b	1f
+2:	b	3f
+3:	sync
+	isync
+	b	1b
+1:	/* disp-flush L2. The interesting thing here is that the L2 can be
+	 * up to 2Mb ... so using the ROM, we'll end up wrapping back to memory
+	 * but that is probbaly fine. We disp-flush over 4Mb to be safe
+	 */
+	lis	r4,2
+	mtctr	r4
+	lis	r4,0xfff0
+1:	lwz	r0,0(r4)
+	addi	r4,r4,32
+	bdnz	1b
+	sync
+	isync
+	lis	r4,2
+	mtctr	r4
+	lis	r4,0xfff0
+1:	dcbf	0,r4
+	addi	r4,r4,32
+	bdnz	1b
+	sync
+	isync
+
+	/* now disable L2 */
+	rlwinm	r5,r5,0,~L2CR_L2E
+	b	2f
+	/* When disabling L2, code must be in L1 */
+	.balign 32
+1:	mtspr	SPRN_L2CR,r5
+3:	sync
+	isync
+	b	1f
+2:	b	3f
+3:	sync
+	isync
+	b	1b
+1:	sync
+	isync
+	/* Invalidate L2. This is pre-745x, we clear the L2I bit ourselves */
+	oris	r4,r5,L2CR_L2I@h
+	mtspr	SPRN_L2CR,r4
+	sync
+	isync
+
+	/* Wait for the invalidation to complete */
+1:	mfspr	r3,SPRN_L2CR
+	rlwinm.	r0,r3,0,31,31
+	bne	1b
+
+	/* Clear L2I */
+	xoris	r4,r4,L2CR_L2I@h
+	sync
+	mtspr	SPRN_L2CR,r4
+	sync
+
+	/* now disable the L1 data cache */
+	mfspr	r0,SPRN_HID0
+	rlwinm	r0,r0,0,~(HID0_DCE|HID0_ICE)
+	mtspr	SPRN_HID0,r0
+	sync
+	isync
+
+	/* Restore HID0[DPM] to whatever it was before */
+	sync
+	mfspr	r0,SPRN_HID0
+	rlwimi	r0,r8,0,11,11		/* Turn back HID0[DPM] */
+	mtspr	SPRN_HID0,r0
+	sync
+
+	/* restore DR and EE */
+	sync
+	mtmsr	r11
+	isync
+
+	mtlr	r10
+	blr
+
+/* This code is for 745x processors */
+flush_disable_745x:
+	/* Turn off EE and DR in MSR */
+	mfmsr	r11
+	rlwinm	r0,r11,0,~MSR_EE
+	rlwinm	r0,r0,0,~MSR_DR
+	sync
+	mtmsr	r0
+	isync
+
+	/* Stop prefetch streams */
+	DSSALL
+	sync
+
+	/* Disable L2 prefetching */
+	mfspr	r0,SPRN_MSSCR0
+	rlwinm	r0,r0,0,0,29
+	mtspr	SPRN_MSSCR0,r0
+	sync
+	isync
+	lis	r4,0
+	dcbf	0,r4
+	dcbf	0,r4
+	dcbf	0,r4
+	dcbf	0,r4
+	dcbf	0,r4
+	dcbf	0,r4
+	dcbf	0,r4
+	dcbf	0,r4
+
+	/* Due to a bug with the HW flush on some CPU revs, we occasionally
+	 * experience data corruption. I'm adding a displacement flush along
+	 * with a dcbf loop over a few Mb to "help". The problem isn't totally
+	 * fixed by this in theory, but at least, in practice, I couldn't reproduce
+	 * it even with a big hammer...
+	 */
+
+        lis     r4,0x0002
+        mtctr   r4
+ 	li      r4,0
+1:
+        lwz     r0,0(r4)
+        addi    r4,r4,32                /* Go to start of next cache line */
+        bdnz    1b
+        isync
+
+        /* Now, flush the first 4MB of memory */
+        lis     r4,0x0002
+        mtctr   r4
+	li      r4,0
+        sync
+1:
+        dcbf    0,r4
+        addi    r4,r4,32                /* Go to start of next cache line */
+        bdnz    1b
+
+	/* Flush and disable the L1 data cache */
+	mfspr	r6,SPRN_LDSTCR
+	lis	r3,0xfff0	/* read from ROM for displacement flush */
+	li	r4,0xfe		/* start with only way 0 unlocked */
+	li	r5,128		/* 128 lines in each way */
+1:	mtctr	r5
+	rlwimi	r6,r4,0,24,31
+	mtspr	SPRN_LDSTCR,r6
+	sync
+	isync
+2:	lwz	r0,0(r3)	/* touch each cache line */
+	addi	r3,r3,32
+	bdnz	2b
+	rlwinm	r4,r4,1,24,30	/* move on to the next way */
+	ori	r4,r4,1
+	cmpwi	r4,0xff		/* all done? */
+	bne	1b
+	/* now unlock the L1 data cache */
+	li	r4,0
+	rlwimi	r6,r4,0,24,31
+	sync
+	mtspr	SPRN_LDSTCR,r6
+	sync
+	isync
+
+	/* Flush the L2 cache using the hardware assist */
+	mfspr	r3,SPRN_L2CR
+	cmpwi	r3,0		/* check if it is enabled first */
+	bge	4f
+	oris	r0,r3,(L2CR_L2IO_745x|L2CR_L2DO_745x)@h
+	b	2f
+	/* When disabling/locking L2, code must be in L1 */
+	.balign 32
+1:	mtspr	SPRN_L2CR,r0	/* lock the L2 cache */
+3:	sync
+	isync
+	b	1f
+2:	b	3f
+3:	sync
+	isync
+	b	1b
+1:	sync
+	isync
+	ori	r0,r3,L2CR_L2HWF_745x
+	sync
+	mtspr	SPRN_L2CR,r0	/* set the hardware flush bit */
+3:	mfspr	r0,SPRN_L2CR	/* wait for it to go to 0 */
+	andi.	r0,r0,L2CR_L2HWF_745x
+	bne	3b
+	sync
+	rlwinm	r3,r3,0,~L2CR_L2E
+	b	2f
+	/* When disabling L2, code must be in L1 */
+	.balign 32
+1:	mtspr	SPRN_L2CR,r3	/* disable the L2 cache */
+3:	sync
+	isync
+	b	1f
+2:	b	3f
+3:	sync
+	isync
+	b	1b
+1:	sync
+	isync
+	oris	r4,r3,L2CR_L2I@h
+	mtspr	SPRN_L2CR,r4
+	sync
+	isync
+1:	mfspr	r4,SPRN_L2CR
+	andis.	r0,r4,L2CR_L2I@h
+	bne	1b
+	sync
+
+BEGIN_FTR_SECTION
+	/* Flush the L3 cache using the hardware assist */
+4:	mfspr	r3,SPRN_L3CR
+	cmpwi	r3,0		/* check if it is enabled */
+	bge	6f
+	oris	r0,r3,L3CR_L3IO@h
+	ori	r0,r0,L3CR_L3DO
+	sync
+	mtspr	SPRN_L3CR,r0	/* lock the L3 cache */
+	sync
+	isync
+	ori	r0,r0,L3CR_L3HWF
+	sync
+	mtspr	SPRN_L3CR,r0	/* set the hardware flush bit */
+5:	mfspr	r0,SPRN_L3CR	/* wait for it to go to zero */
+	andi.	r0,r0,L3CR_L3HWF
+	bne	5b
+	rlwinm	r3,r3,0,~L3CR_L3E
+	sync
+	mtspr	SPRN_L3CR,r3	/* disable the L3 cache */
+	sync
+	ori	r4,r3,L3CR_L3I
+	mtspr	SPRN_L3CR,r4
+1:	mfspr	r4,SPRN_L3CR
+	andi.	r0,r4,L3CR_L3I
+	bne	1b
+	sync
+END_FTR_SECTION_IFSET(CPU_FTR_L3CR)
+
+6:	mfspr	r0,SPRN_HID0	/* now disable the L1 data cache */
+	rlwinm	r0,r0,0,~HID0_DCE
+	mtspr	SPRN_HID0,r0
+	sync
+	isync
+	mtmsr	r11		/* restore DR and EE */
+	isync
+	blr
+#endif	/* CONFIG_6xx */
diff --git a/arch/powerpc/platforms/powermac/cpufreq_32.c b/arch/powerpc/platforms/powermac/cpufreq_32.c
new file mode 100644
index 000000000000..56fd4e05fede
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/cpufreq_32.c
@@ -0,0 +1,727 @@
+/*
+ *  arch/ppc/platforms/pmac_cpufreq.c
+ *
+ *  Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ *  Copyright (C) 2004        John Steele Scott <toojays@toojays.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * TODO: Need a big cleanup here. Basically, we need to have different
+ * cpufreq_driver structures for the different type of HW instead of the
+ * current mess. We also need to better deal with the detection of the
+ * type of machine.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+#include <linux/slab.h>
+#include <linux/cpufreq.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+#include <linux/i2c.h>
+#include <linux/hardirq.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/irq.h>
+#include <asm/pmac_feature.h>
+#include <asm/mmu_context.h>
+#include <asm/sections.h>
+#include <asm/cputable.h>
+#include <asm/time.h>
+#include <asm/system.h>
+#include <asm/mpic.h>
+#include <asm/keylargo.h>
+
+/* WARNING !!! This will cause calibrate_delay() to be called,
+ * but this is an __init function ! So you MUST go edit
+ * init/main.c to make it non-init before enabling DEBUG_FREQ
+ */
+#undef DEBUG_FREQ
+
+/*
+ * There is a problem with the core cpufreq code on SMP kernels,
+ * it won't recalculate the Bogomips properly
+ */
+#ifdef CONFIG_SMP
+#warning "WARNING, CPUFREQ not recommended on SMP kernels"
+#endif
+
+extern void low_choose_7447a_dfs(int dfs);
+extern void low_choose_750fx_pll(int pll);
+extern void low_sleep_handler(void);
+
+/*
+ * Currently, PowerMac cpufreq supports only high & low frequencies
+ * that are set by the firmware
+ */
+static unsigned int low_freq;
+static unsigned int hi_freq;
+static unsigned int cur_freq;
+static unsigned int sleep_freq;
+
+/*
+ * Different models uses different mecanisms to switch the frequency
+ */
+static int (*set_speed_proc)(int low_speed);
+static unsigned int (*get_speed_proc)(void);
+
+/*
+ * Some definitions used by the various speedprocs
+ */
+static u32 voltage_gpio;
+static u32 frequency_gpio;
+static u32 slew_done_gpio;
+static int no_schedule;
+static int has_cpu_l2lve;
+static int is_pmu_based;
+
+/* There are only two frequency states for each processor. Values
+ * are in kHz for the time being.
+ */
+#define CPUFREQ_HIGH                  0
+#define CPUFREQ_LOW                   1
+
+static struct cpufreq_frequency_table pmac_cpu_freqs[] = {
+	{CPUFREQ_HIGH, 		0},
+	{CPUFREQ_LOW,		0},
+	{0,			CPUFREQ_TABLE_END},
+};
+
+static struct freq_attr* pmac_cpu_freqs_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+static inline void local_delay(unsigned long ms)
+{
+	if (no_schedule)
+		mdelay(ms);
+	else
+		msleep(ms);
+}
+
+#ifdef DEBUG_FREQ
+static inline void debug_calc_bogomips(void)
+{
+	/* This will cause a recalc of bogomips and display the
+	 * result. We backup/restore the value to avoid affecting the
+	 * core cpufreq framework's own calculation.
+	 */
+	extern void calibrate_delay(void);
+
+	unsigned long save_lpj = loops_per_jiffy;
+	calibrate_delay();
+	loops_per_jiffy = save_lpj;
+}
+#endif /* DEBUG_FREQ */
+
+/* Switch CPU speed under 750FX CPU control
+ */
+static int cpu_750fx_cpu_speed(int low_speed)
+{
+	u32 hid2;
+
+	if (low_speed == 0) {
+		/* ramping up, set voltage first */
+		pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
+		/* Make sure we sleep for at least 1ms */
+		local_delay(10);
+
+		/* tweak L2 for high voltage */
+		if (has_cpu_l2lve) {
+			hid2 = mfspr(SPRN_HID2);
+			hid2 &= ~0x2000;
+			mtspr(SPRN_HID2, hid2);
+		}
+	}
+#ifdef CONFIG_6xx
+	low_choose_750fx_pll(low_speed);
+#endif
+	if (low_speed == 1) {
+		/* tweak L2 for low voltage */
+		if (has_cpu_l2lve) {
+			hid2 = mfspr(SPRN_HID2);
+			hid2 |= 0x2000;
+			mtspr(SPRN_HID2, hid2);
+		}
+
+		/* ramping down, set voltage last */
+		pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
+		local_delay(10);
+	}
+
+	return 0;
+}
+
+static unsigned int cpu_750fx_get_cpu_speed(void)
+{
+	if (mfspr(SPRN_HID1) & HID1_PS)
+		return low_freq;
+	else
+		return hi_freq;
+}
+
+/* Switch CPU speed using DFS */
+static int dfs_set_cpu_speed(int low_speed)
+{
+	if (low_speed == 0) {
+		/* ramping up, set voltage first */
+		pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
+		/* Make sure we sleep for at least 1ms */
+		local_delay(1);
+	}
+
+	/* set frequency */
+#ifdef CONFIG_6xx
+	low_choose_7447a_dfs(low_speed);
+#endif
+	udelay(100);
+
+	if (low_speed == 1) {
+		/* ramping down, set voltage last */
+		pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
+		local_delay(1);
+	}
+
+	return 0;
+}
+
+static unsigned int dfs_get_cpu_speed(void)
+{
+	if (mfspr(SPRN_HID1) & HID1_DFS)
+		return low_freq;
+	else
+		return hi_freq;
+}
+
+
+/* Switch CPU speed using slewing GPIOs
+ */
+static int gpios_set_cpu_speed(int low_speed)
+{
+	int gpio, timeout = 0;
+
+	/* If ramping up, set voltage first */
+	if (low_speed == 0) {
+		pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
+		/* Delay is way too big but it's ok, we schedule */
+		local_delay(10);
+	}
+
+	/* Set frequency */
+	gpio = 	pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0);
+	if (low_speed == ((gpio & 0x01) == 0))
+		goto skip;
+
+	pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, frequency_gpio,
+			  low_speed ? 0x04 : 0x05);
+	udelay(200);
+	do {
+		if (++timeout > 100)
+			break;
+		local_delay(1);
+		gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, slew_done_gpio, 0);
+	} while((gpio & 0x02) == 0);
+ skip:
+	/* If ramping down, set voltage last */
+	if (low_speed == 1) {
+		pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
+		/* Delay is way too big but it's ok, we schedule */
+		local_delay(10);
+	}
+
+#ifdef DEBUG_FREQ
+	debug_calc_bogomips();
+#endif
+
+	return 0;
+}
+
+/* Switch CPU speed under PMU control
+ */
+static int pmu_set_cpu_speed(int low_speed)
+{
+	struct adb_request req;
+	unsigned long save_l2cr;
+	unsigned long save_l3cr;
+	unsigned int pic_prio;
+	unsigned long flags;
+
+	preempt_disable();
+
+#ifdef DEBUG_FREQ
+	printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1));
+#endif
+	pmu_suspend();
+
+	/* Disable all interrupt sources on openpic */
+ 	pic_prio = mpic_cpu_get_priority();
+	mpic_cpu_set_priority(0xf);
+
+	/* Make sure the decrementer won't interrupt us */
+	asm volatile("mtdec %0" : : "r" (0x7fffffff));
+	/* Make sure any pending DEC interrupt occuring while we did
+	 * the above didn't re-enable the DEC */
+	mb();
+	asm volatile("mtdec %0" : : "r" (0x7fffffff));
+
+	/* We can now disable MSR_EE */
+	local_irq_save(flags);
+
+	/* Giveup the FPU & vec */
+	enable_kernel_fp();
+
+#ifdef CONFIG_ALTIVEC
+	if (cpu_has_feature(CPU_FTR_ALTIVEC))
+		enable_kernel_altivec();
+#endif /* CONFIG_ALTIVEC */
+
+	/* Save & disable L2 and L3 caches */
+	save_l3cr = _get_L3CR();	/* (returns -1 if not available) */
+	save_l2cr = _get_L2CR();	/* (returns -1 if not available) */
+
+	/* Send the new speed command. My assumption is that this command
+	 * will cause PLL_CFG[0..3] to be changed next time CPU goes to sleep
+	 */
+	pmu_request(&req, NULL, 6, PMU_CPU_SPEED, 'W', 'O', 'O', 'F', low_speed);
+	while (!req.complete)
+		pmu_poll();
+
+	/* Prepare the northbridge for the speed transition */
+	pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,1);
+
+	/* Call low level code to backup CPU state and recover from
+	 * hardware reset
+	 */
+	low_sleep_handler();
+
+	/* Restore the northbridge */
+	pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,0);
+
+	/* Restore L2 cache */
+	if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0)
+ 		_set_L2CR(save_l2cr);
+	/* Restore L3 cache */
+	if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0)
+ 		_set_L3CR(save_l3cr);
+
+	/* Restore userland MMU context */
+	set_context(current->active_mm->context, current->active_mm->pgd);
+
+#ifdef DEBUG_FREQ
+	printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1));
+#endif
+
+	/* Restore low level PMU operations */
+	pmu_unlock();
+
+	/* Restore decrementer */
+	wakeup_decrementer();
+
+	/* Restore interrupts */
+ 	mpic_cpu_set_priority(pic_prio);
+
+	/* Let interrupts flow again ... */
+	local_irq_restore(flags);
+
+#ifdef DEBUG_FREQ
+	debug_calc_bogomips();
+#endif
+
+	pmu_resume();
+
+	preempt_enable();
+
+	return 0;
+}
+
+static int do_set_cpu_speed(int speed_mode, int notify)
+{
+	struct cpufreq_freqs freqs;
+	unsigned long l3cr;
+	static unsigned long prev_l3cr;
+
+	freqs.old = cur_freq;
+	freqs.new = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
+	freqs.cpu = smp_processor_id();
+
+	if (freqs.old == freqs.new)
+		return 0;
+
+	if (notify)
+		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+	if (speed_mode == CPUFREQ_LOW &&
+	    cpu_has_feature(CPU_FTR_L3CR)) {
+		l3cr = _get_L3CR();
+		if (l3cr & L3CR_L3E) {
+			prev_l3cr = l3cr;
+			_set_L3CR(0);
+		}
+	}
+	set_speed_proc(speed_mode == CPUFREQ_LOW);
+	if (speed_mode == CPUFREQ_HIGH &&
+	    cpu_has_feature(CPU_FTR_L3CR)) {
+		l3cr = _get_L3CR();
+		if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr)
+			_set_L3CR(prev_l3cr);
+	}
+	if (notify)
+		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
+
+	return 0;
+}
+
+static unsigned int pmac_cpufreq_get_speed(unsigned int cpu)
+{
+	return cur_freq;
+}
+
+static int pmac_cpufreq_verify(struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, pmac_cpu_freqs);
+}
+
+static int pmac_cpufreq_target(	struct cpufreq_policy *policy,
+					unsigned int target_freq,
+					unsigned int relation)
+{
+	unsigned int    newstate = 0;
+	int		rc;
+
+	if (cpufreq_frequency_table_target(policy, pmac_cpu_freqs,
+			target_freq, relation, &newstate))
+		return -EINVAL;
+
+	rc = do_set_cpu_speed(newstate, 1);
+
+	ppc_proc_freq = cur_freq * 1000ul;
+	return rc;
+}
+
+static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+	if (policy->cpu != 0)
+		return -ENODEV;
+
+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+	policy->cpuinfo.transition_latency	= CPUFREQ_ETERNAL;
+	policy->cur = cur_freq;
+
+	cpufreq_frequency_table_get_attr(pmac_cpu_freqs, policy->cpu);
+	return cpufreq_frequency_table_cpuinfo(policy, pmac_cpu_freqs);
+}
+
+static u32 read_gpio(struct device_node *np)
+{
+	u32 *reg = (u32 *)get_property(np, "reg", NULL);
+	u32 offset;
+
+	if (reg == NULL)
+		return 0;
+	/* That works for all keylargos but shall be fixed properly
+	 * some day... The problem is that it seems we can't rely
+	 * on the "reg" property of the GPIO nodes, they are either
+	 * relative to the base of KeyLargo or to the base of the
+	 * GPIO space, and the device-tree doesn't help.
+	 */
+	offset = *reg;
+	if (offset < KEYLARGO_GPIO_LEVELS0)
+		offset += KEYLARGO_GPIO_LEVELS0;
+	return offset;
+}
+
+static int pmac_cpufreq_suspend(struct cpufreq_policy *policy, pm_message_t pmsg)
+{
+	/* Ok, this could be made a bit smarter, but let's be robust for now. We
+	 * always force a speed change to high speed before sleep, to make sure
+	 * we have appropriate voltage and/or bus speed for the wakeup process,
+	 * and to make sure our loops_per_jiffies are "good enough", that is will
+	 * not cause too short delays if we sleep in low speed and wake in high
+	 * speed..
+	 */
+	no_schedule = 1;
+	sleep_freq = cur_freq;
+	if (cur_freq == low_freq && !is_pmu_based)
+		do_set_cpu_speed(CPUFREQ_HIGH, 0);
+	return 0;
+}
+
+static int pmac_cpufreq_resume(struct cpufreq_policy *policy)
+{
+	/* If we resume, first check if we have a get() function */
+	if (get_speed_proc)
+		cur_freq = get_speed_proc();
+	else
+		cur_freq = 0;
+
+	/* We don't, hrm... we don't really know our speed here, best
+	 * is that we force a switch to whatever it was, which is
+	 * probably high speed due to our suspend() routine
+	 */
+	do_set_cpu_speed(sleep_freq == low_freq ?
+			 CPUFREQ_LOW : CPUFREQ_HIGH, 0);
+
+	ppc_proc_freq = cur_freq * 1000ul;
+
+	no_schedule = 0;
+	return 0;
+}
+
+static struct cpufreq_driver pmac_cpufreq_driver = {
+	.verify 	= pmac_cpufreq_verify,
+	.target 	= pmac_cpufreq_target,
+	.get		= pmac_cpufreq_get_speed,
+	.init		= pmac_cpufreq_cpu_init,
+	.suspend	= pmac_cpufreq_suspend,
+	.resume		= pmac_cpufreq_resume,
+	.flags		= CPUFREQ_PM_NO_WARN,
+	.attr		= pmac_cpu_freqs_attr,
+	.name		= "powermac",
+	.owner		= THIS_MODULE,
+};
+
+
+static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode)
+{
+	struct device_node *volt_gpio_np = of_find_node_by_name(NULL,
+								"voltage-gpio");
+	struct device_node *freq_gpio_np = of_find_node_by_name(NULL,
+								"frequency-gpio");
+	struct device_node *slew_done_gpio_np = of_find_node_by_name(NULL,
+								     "slewing-done");
+	u32 *value;
+
+	/*
+	 * Check to see if it's GPIO driven or PMU only
+	 *
+	 * The way we extract the GPIO address is slightly hackish, but it
+	 * works well enough for now. We need to abstract the whole GPIO
+	 * stuff sooner or later anyway
+	 */
+
+	if (volt_gpio_np)
+		voltage_gpio = read_gpio(volt_gpio_np);
+	if (freq_gpio_np)
+		frequency_gpio = read_gpio(freq_gpio_np);
+	if (slew_done_gpio_np)
+		slew_done_gpio = read_gpio(slew_done_gpio_np);
+
+	/* If we use the frequency GPIOs, calculate the min/max speeds based
+	 * on the bus frequencies
+	 */
+	if (frequency_gpio && slew_done_gpio) {
+		int lenp, rc;
+		u32 *freqs, *ratio;
+
+		freqs = (u32 *)get_property(cpunode, "bus-frequencies", &lenp);
+		lenp /= sizeof(u32);
+		if (freqs == NULL || lenp != 2) {
+			printk(KERN_ERR "cpufreq: bus-frequencies incorrect or missing\n");
+			return 1;
+		}
+		ratio = (u32 *)get_property(cpunode, "processor-to-bus-ratio*2", NULL);
+		if (ratio == NULL) {
+			printk(KERN_ERR "cpufreq: processor-to-bus-ratio*2 missing\n");
+			return 1;
+		}
+
+		/* Get the min/max bus frequencies */
+		low_freq = min(freqs[0], freqs[1]);
+		hi_freq = max(freqs[0], freqs[1]);
+
+		/* Grrrr.. It _seems_ that the device-tree is lying on the low bus
+		 * frequency, it claims it to be around 84Mhz on some models while
+		 * it appears to be approx. 101Mhz on all. Let's hack around here...
+		 * fortunately, we don't need to be too precise
+		 */
+		if (low_freq < 98000000)
+			low_freq = 101000000;
+
+		/* Convert those to CPU core clocks */
+		low_freq = (low_freq * (*ratio)) / 2000;
+		hi_freq = (hi_freq * (*ratio)) / 2000;
+
+		/* Now we get the frequencies, we read the GPIO to see what is out current
+		 * speed
+		 */
+		rc = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0);
+		cur_freq = (rc & 0x01) ? hi_freq : low_freq;
+
+		set_speed_proc = gpios_set_cpu_speed;
+		return 1;
+	}
+
+	/* If we use the PMU, look for the min & max frequencies in the
+	 * device-tree
+	 */
+	value = (u32 *)get_property(cpunode, "min-clock-frequency", NULL);
+	if (!value)
+		return 1;
+	low_freq = (*value) / 1000;
+	/* The PowerBook G4 12" (PowerBook6,1) has an error in the device-tree
+	 * here */
+	if (low_freq < 100000)
+		low_freq *= 10;
+
+	value = (u32 *)get_property(cpunode, "max-clock-frequency", NULL);
+	if (!value)
+		return 1;
+	hi_freq = (*value) / 1000;
+	set_speed_proc = pmu_set_cpu_speed;
+	is_pmu_based = 1;
+
+	return 0;
+}
+
+static int pmac_cpufreq_init_7447A(struct device_node *cpunode)
+{
+	struct device_node *volt_gpio_np;
+
+	if (get_property(cpunode, "dynamic-power-step", NULL) == NULL)
+		return 1;
+
+	volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select");
+	if (volt_gpio_np)
+		voltage_gpio = read_gpio(volt_gpio_np);
+	if (!voltage_gpio){
+		printk(KERN_ERR "cpufreq: missing cpu-vcore-select gpio\n");
+		return 1;
+	}
+
+	/* OF only reports the high frequency */
+	hi_freq = cur_freq;
+	low_freq = cur_freq/2;
+
+	/* Read actual frequency from CPU */
+	cur_freq = dfs_get_cpu_speed();
+	set_speed_proc = dfs_set_cpu_speed;
+	get_speed_proc = dfs_get_cpu_speed;
+
+	return 0;
+}
+
+static int pmac_cpufreq_init_750FX(struct device_node *cpunode)
+{
+	struct device_node *volt_gpio_np;
+	u32 pvr, *value;
+
+	if (get_property(cpunode, "dynamic-power-step", NULL) == NULL)
+		return 1;
+
+	hi_freq = cur_freq;
+	value = (u32 *)get_property(cpunode, "reduced-clock-frequency", NULL);
+	if (!value)
+		return 1;
+	low_freq = (*value) / 1000;
+
+	volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select");
+	if (volt_gpio_np)
+		voltage_gpio = read_gpio(volt_gpio_np);
+
+	pvr = mfspr(SPRN_PVR);
+	has_cpu_l2lve = !((pvr & 0xf00) == 0x100);
+
+	set_speed_proc = cpu_750fx_cpu_speed;
+	get_speed_proc = cpu_750fx_get_cpu_speed;
+	cur_freq = cpu_750fx_get_cpu_speed();
+
+	return 0;
+}
+
+/* Currently, we support the following machines:
+ *
+ *  - Titanium PowerBook 1Ghz (PMU based, 667Mhz & 1Ghz)
+ *  - Titanium PowerBook 800 (PMU based, 667Mhz & 800Mhz)
+ *  - Titanium PowerBook 400 (PMU based, 300Mhz & 400Mhz)
+ *  - Titanium PowerBook 500 (PMU based, 300Mhz & 500Mhz)
+ *  - iBook2 500/600 (PMU based, 400Mhz & 500/600Mhz)
+ *  - iBook2 700 (CPU based, 400Mhz & 700Mhz, support low voltage)
+ *  - Recent MacRISC3 laptops
+ *  - All new machines with 7447A CPUs
+ */
+static int __init pmac_cpufreq_setup(void)
+{
+	struct device_node	*cpunode;
+	u32			*value;
+
+	if (strstr(cmd_line, "nocpufreq"))
+		return 0;
+
+	/* Assume only one CPU */
+	cpunode = find_type_devices("cpu");
+	if (!cpunode)
+		goto out;
+
+	/* Get current cpu clock freq */
+	value = (u32 *)get_property(cpunode, "clock-frequency", NULL);
+	if (!value)
+		goto out;
+	cur_freq = (*value) / 1000;
+
+	/*  Check for 7447A based MacRISC3 */
+	if (machine_is_compatible("MacRISC3") &&
+	    get_property(cpunode, "dynamic-power-step", NULL) &&
+	    PVR_VER(mfspr(SPRN_PVR)) == 0x8003) {
+		pmac_cpufreq_init_7447A(cpunode);
+	/* Check for other MacRISC3 machines */
+	} else if (machine_is_compatible("PowerBook3,4") ||
+		   machine_is_compatible("PowerBook3,5") ||
+		   machine_is_compatible("MacRISC3")) {
+		pmac_cpufreq_init_MacRISC3(cpunode);
+	/* Else check for iBook2 500/600 */
+	} else if (machine_is_compatible("PowerBook4,1")) {
+		hi_freq = cur_freq;
+		low_freq = 400000;
+		set_speed_proc = pmu_set_cpu_speed;
+		is_pmu_based = 1;
+	}
+	/* Else check for TiPb 550 */
+	else if (machine_is_compatible("PowerBook3,3") && cur_freq == 550000) {
+		hi_freq = cur_freq;
+		low_freq = 500000;
+		set_speed_proc = pmu_set_cpu_speed;
+		is_pmu_based = 1;
+	}
+	/* Else check for TiPb 400 & 500 */
+	else if (machine_is_compatible("PowerBook3,2")) {
+		/* We only know about the 400 MHz and the 500Mhz model
+		 * they both have 300 MHz as low frequency
+		 */
+		if (cur_freq < 350000 || cur_freq > 550000)
+			goto out;
+		hi_freq = cur_freq;
+		low_freq = 300000;
+		set_speed_proc = pmu_set_cpu_speed;
+		is_pmu_based = 1;
+	}
+	/* Else check for 750FX */
+	else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000)
+		pmac_cpufreq_init_750FX(cpunode);
+out:
+	if (set_speed_proc == NULL)
+		return -ENODEV;
+
+	pmac_cpu_freqs[CPUFREQ_LOW].frequency = low_freq;
+	pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq;
+	ppc_proc_freq = cur_freq * 1000ul;
+
+	printk(KERN_INFO "Registering PowerMac CPU frequency driver\n");
+	printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n",
+	       low_freq/1000, hi_freq/1000, cur_freq/1000);
+
+	return cpufreq_register_driver(&pmac_cpufreq_driver);
+}
+
+module_init(pmac_cpufreq_setup);
+
diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c
new file mode 100644
index 000000000000..39150342c6f1
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/cpufreq_64.c
@@ -0,0 +1,323 @@
+/*
+ *  Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ *  and                       Markus Demleitner <msdemlei@cl.uni-heidelberg.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs,
+ * that is iMac G5 and latest single CPU desktop.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/cpufreq.h>
+#include <linux/init.h>
+#include <linux/completion.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/irq.h>
+#include <asm/sections.h>
+#include <asm/cputable.h>
+#include <asm/time.h>
+#include <asm/smu.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt...) printk(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+/* see 970FX user manual */
+
+#define SCOM_PCR 0x0aa001			/* PCR scom addr */
+
+#define PCR_HILO_SELECT		0x80000000U	/* 1 = PCR, 0 = PCRH */
+#define PCR_SPEED_FULL		0x00000000U	/* 1:1 speed value */
+#define PCR_SPEED_HALF		0x00020000U	/* 1:2 speed value */
+#define PCR_SPEED_QUARTER	0x00040000U	/* 1:4 speed value */
+#define PCR_SPEED_MASK		0x000e0000U	/* speed mask */
+#define PCR_SPEED_SHIFT		17
+#define PCR_FREQ_REQ_VALID	0x00010000U	/* freq request valid */
+#define PCR_VOLT_REQ_VALID	0x00008000U	/* volt request valid */
+#define PCR_TARGET_TIME_MASK	0x00006000U	/* target time */
+#define PCR_STATLAT_MASK	0x00001f00U	/* STATLAT value */
+#define PCR_SNOOPLAT_MASK	0x000000f0U	/* SNOOPLAT value */
+#define PCR_SNOOPACC_MASK	0x0000000fU	/* SNOOPACC value */
+
+#define SCOM_PSR 0x408001			/* PSR scom addr */
+/* warning: PSR is a 64 bits register */
+#define PSR_CMD_RECEIVED	0x2000000000000000U   /* command received */
+#define PSR_CMD_COMPLETED	0x1000000000000000U   /* command completed */
+#define PSR_CUR_SPEED_MASK	0x0300000000000000U   /* current speed */
+#define PSR_CUR_SPEED_SHIFT	(56)
+
+/*
+ * The G5 only supports two frequencies (Quarter speed is not supported)
+ */
+#define CPUFREQ_HIGH                  0
+#define CPUFREQ_LOW                   1
+
+static struct cpufreq_frequency_table g5_cpu_freqs[] = {
+	{CPUFREQ_HIGH, 		0},
+	{CPUFREQ_LOW,		0},
+	{0,			CPUFREQ_TABLE_END},
+};
+
+static struct freq_attr* g5_cpu_freqs_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+/* Power mode data is an array of the 32 bits PCR values to use for
+ * the various frequencies, retreived from the device-tree
+ */
+static u32 *g5_pmode_data;
+static int g5_pmode_max;
+static int g5_pmode_cur;
+
+static DECLARE_MUTEX(g5_switch_mutex);
+
+
+static struct smu_sdbp_fvt *g5_fvt_table;	/* table of op. points */
+static int g5_fvt_count;			/* number of op. points */
+static int g5_fvt_cur;				/* current op. point */
+
+/* ----------------- real hardware interface */
+
+static void g5_switch_volt(int speed_mode)
+{
+	struct smu_simple_cmd	cmd;
+
+	DECLARE_COMPLETION(comp);
+	smu_queue_simple(&cmd, SMU_CMD_POWER_COMMAND, 8, smu_done_complete,
+			 &comp, 'V', 'S', 'L', 'E', 'W',
+			 0xff, g5_fvt_cur+1, speed_mode);
+	wait_for_completion(&comp);
+}
+
+static int g5_switch_freq(int speed_mode)
+{
+	struct cpufreq_freqs freqs;
+	int to;
+
+	if (g5_pmode_cur == speed_mode)
+		return 0;
+
+	down(&g5_switch_mutex);
+
+	freqs.old = g5_cpu_freqs[g5_pmode_cur].frequency;
+	freqs.new = g5_cpu_freqs[speed_mode].frequency;
+	freqs.cpu = 0;
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	/* If frequency is going up, first ramp up the voltage */
+	if (speed_mode < g5_pmode_cur)
+		g5_switch_volt(speed_mode);
+
+	/* Clear PCR high */
+	scom970_write(SCOM_PCR, 0);
+	/* Clear PCR low */
+       	scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0);
+	/* Set PCR low */
+	scom970_write(SCOM_PCR, PCR_HILO_SELECT |
+		      g5_pmode_data[speed_mode]);
+
+	/* Wait for completion */
+	for (to = 0; to < 10; to++) {
+		unsigned long psr = scom970_read(SCOM_PSR);
+
+		if ((psr & PSR_CMD_RECEIVED) == 0 &&
+		    (((psr >> PSR_CUR_SPEED_SHIFT) ^
+		      (g5_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3)
+		    == 0)
+			break;
+		if (psr & PSR_CMD_COMPLETED)
+			break;
+		udelay(100);
+	}
+
+	/* If frequency is going down, last ramp the voltage */
+	if (speed_mode > g5_pmode_cur)
+		g5_switch_volt(speed_mode);
+
+	g5_pmode_cur = speed_mode;
+	ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul;
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+	up(&g5_switch_mutex);
+
+	return 0;
+}
+
+static int g5_query_freq(void)
+{
+	unsigned long psr = scom970_read(SCOM_PSR);
+	int i;
+
+	for (i = 0; i <= g5_pmode_max; i++)
+		if ((((psr >> PSR_CUR_SPEED_SHIFT) ^
+		      (g5_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0)
+			break;
+	return i;
+}
+
+/* ----------------- cpufreq bookkeeping */
+
+static int g5_cpufreq_verify(struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, g5_cpu_freqs);
+}
+
+static int g5_cpufreq_target(struct cpufreq_policy *policy,
+	unsigned int target_freq, unsigned int relation)
+{
+	unsigned int    newstate = 0;
+
+	if (cpufreq_frequency_table_target(policy, g5_cpu_freqs,
+			target_freq, relation, &newstate))
+		return -EINVAL;
+
+	return g5_switch_freq(newstate);
+}
+
+static unsigned int g5_cpufreq_get_speed(unsigned int cpu)
+{
+	return g5_cpu_freqs[g5_pmode_cur].frequency;
+}
+
+static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+	if (policy->cpu != 0)
+		return -ENODEV;
+
+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+	policy->cur = g5_cpu_freqs[g5_query_freq()].frequency;
+	cpufreq_frequency_table_get_attr(g5_cpu_freqs, policy->cpu);
+
+	return cpufreq_frequency_table_cpuinfo(policy,
+		g5_cpu_freqs);
+}
+
+
+static struct cpufreq_driver g5_cpufreq_driver = {
+	.name		= "powermac",
+	.owner		= THIS_MODULE,
+	.flags		= CPUFREQ_CONST_LOOPS,
+	.init		= g5_cpufreq_cpu_init,
+	.verify		= g5_cpufreq_verify,
+	.target		= g5_cpufreq_target,
+	.get		= g5_cpufreq_get_speed,
+	.attr 		= g5_cpu_freqs_attr,
+};
+
+
+static int __init g5_cpufreq_init(void)
+{
+	struct device_node *cpunode;
+	unsigned int psize, ssize;
+	struct smu_sdbp_header *shdr;
+	unsigned long max_freq;
+	u32 *valp;
+	int rc = -ENODEV;
+
+	/* Look for CPU and SMU nodes */
+	cpunode = of_find_node_by_type(NULL, "cpu");
+	if (!cpunode) {
+		DBG("No CPU node !\n");
+		return -ENODEV;
+	}
+
+	/* Check 970FX for now */
+	valp = (u32 *)get_property(cpunode, "cpu-version", NULL);
+	if (!valp) {
+		DBG("No cpu-version property !\n");
+		goto bail_noprops;
+	}
+	if (((*valp) >> 16) != 0x3c) {
+		DBG("Wrong CPU version: %08x\n", *valp);
+		goto bail_noprops;
+	}
+
+	/* Look for the powertune data in the device-tree */
+	g5_pmode_data = (u32 *)get_property(cpunode, "power-mode-data",&psize);
+	if (!g5_pmode_data) {
+		DBG("No power-mode-data !\n");
+		goto bail_noprops;
+	}
+	g5_pmode_max = psize / sizeof(u32) - 1;
+
+	/* Look for the FVT table */
+	shdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL);
+	if (!shdr)
+		goto bail_noprops;
+	g5_fvt_table = (struct smu_sdbp_fvt *)&shdr[1];
+	ssize = (shdr->len * sizeof(u32)) - sizeof(struct smu_sdbp_header);
+	g5_fvt_count = ssize / sizeof(struct smu_sdbp_fvt);
+	g5_fvt_cur = 0;
+
+	/* Sanity checking */
+	if (g5_fvt_count < 1 || g5_pmode_max < 1)
+		goto bail_noprops;
+
+	/*
+	 * From what I see, clock-frequency is always the maximal frequency.
+	 * The current driver can not slew sysclk yet, so we really only deal
+	 * with powertune steps for now. We also only implement full freq and
+	 * half freq in this version. So far, I haven't yet seen a machine
+	 * supporting anything else.
+	 */
+	valp = (u32 *)get_property(cpunode, "clock-frequency", NULL);
+	if (!valp)
+		return -ENODEV;
+	max_freq = (*valp)/1000;
+	g5_cpu_freqs[0].frequency = max_freq;
+	g5_cpu_freqs[1].frequency = max_freq/2;
+
+	/* Check current frequency */
+	g5_pmode_cur = g5_query_freq();
+	if (g5_pmode_cur > 1)
+		/* We don't support anything but 1:1 and 1:2, fixup ... */
+		g5_pmode_cur = 1;
+
+	/* Force apply current frequency to make sure everything is in
+	 * sync (voltage is right for example). Firmware may leave us with
+	 * a strange setting ...
+	 */
+	g5_switch_freq(g5_pmode_cur);
+
+	printk(KERN_INFO "Registering G5 CPU frequency driver\n");
+	printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
+		g5_cpu_freqs[1].frequency/1000,
+		g5_cpu_freqs[0].frequency/1000,
+		g5_cpu_freqs[g5_pmode_cur].frequency/1000);
+
+	rc = cpufreq_register_driver(&g5_cpufreq_driver);
+
+	/* We keep the CPU node on hold... hopefully, Apple G5 don't have
+	 * hotplug CPU with a dynamic device-tree ...
+	 */
+	return rc;
+
+ bail_noprops:
+	of_node_put(cpunode);
+
+	return rc;
+}
+
+module_init(g5_cpufreq_init);
+
+
+MODULE_LICENSE("GPL");
diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c
new file mode 100644
index 000000000000..0d7fa00fcb00
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/feature.c
@@ -0,0 +1,3071 @@
+/*
+ *  arch/ppc/platforms/pmac_feature.c
+ *
+ *  Copyright (C) 1996-2001 Paul Mackerras (paulus@cs.anu.edu.au)
+ *                          Ben. Herrenschmidt (benh@kernel.crashing.org)
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ *  TODO:
+ *
+ *   - Replace mdelay with some schedule loop if possible
+ *   - Shorten some obfuscated delays on some routines (like modem
+ *     power)
+ *   - Refcount some clocks (see darwin)
+ *   - Split split split...
+ *
+ */
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <asm/sections.h>
+#include <asm/errno.h>
+#include <asm/ohare.h>
+#include <asm/heathrow.h>
+#include <asm/keylargo.h>
+#include <asm/uninorth.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/pmac_feature.h>
+#include <asm/dbdma.h>
+#include <asm/pci-bridge.h>
+#include <asm/pmac_low_i2c.h>
+
+#undef DEBUG_FEATURE
+
+#ifdef DEBUG_FEATURE
+#define DBG(fmt...) printk(KERN_DEBUG fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+#ifdef CONFIG_6xx
+extern int powersave_lowspeed;
+#endif
+
+extern int powersave_nap;
+extern struct device_node *k2_skiplist[2];
+
+
+/*
+ * We use a single global lock to protect accesses. Each driver has
+ * to take care of its own locking
+ */
+static DEFINE_SPINLOCK(feature_lock);
+
+#define LOCK(flags)	spin_lock_irqsave(&feature_lock, flags);
+#define UNLOCK(flags)	spin_unlock_irqrestore(&feature_lock, flags);
+
+
+/*
+ * Instance of some macio stuffs
+ */
+struct macio_chip macio_chips[MAX_MACIO_CHIPS];
+
+struct macio_chip *macio_find(struct device_node *child, int type)
+{
+	while(child) {
+		int	i;
+
+		for (i=0; i < MAX_MACIO_CHIPS && macio_chips[i].of_node; i++)
+			if (child == macio_chips[i].of_node &&
+			    (!type || macio_chips[i].type == type))
+				return &macio_chips[i];
+		child = child->parent;
+	}
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(macio_find);
+
+static const char *macio_names[] =
+{
+	"Unknown",
+	"Grand Central",
+	"OHare",
+	"OHareII",
+	"Heathrow",
+	"Gatwick",
+	"Paddington",
+	"Keylargo",
+	"Pangea",
+	"Intrepid",
+	"K2"
+};
+
+
+
+/*
+ * Uninorth reg. access. Note that Uni-N regs are big endian
+ */
+
+#define UN_REG(r)	(uninorth_base + ((r) >> 2))
+#define UN_IN(r)	(in_be32(UN_REG(r)))
+#define UN_OUT(r,v)	(out_be32(UN_REG(r), (v)))
+#define UN_BIS(r,v)	(UN_OUT((r), UN_IN(r) | (v)))
+#define UN_BIC(r,v)	(UN_OUT((r), UN_IN(r) & ~(v)))
+
+static struct device_node *uninorth_node;
+static u32 __iomem *uninorth_base;
+static u32 uninorth_rev;
+static int uninorth_u3;
+static void __iomem *u3_ht;
+
+/*
+ * For each motherboard family, we have a table of functions pointers
+ * that handle the various features.
+ */
+
+typedef long (*feature_call)(struct device_node *node, long param, long value);
+
+struct feature_table_entry {
+	unsigned int	selector;
+	feature_call	function;
+};
+
+struct pmac_mb_def
+{
+	const char*			model_string;
+	const char*			model_name;
+	int				model_id;
+	struct feature_table_entry*	features;
+	unsigned long			board_flags;
+};
+static struct pmac_mb_def pmac_mb;
+
+/*
+ * Here are the chip specific feature functions
+ */
+
+static inline int simple_feature_tweak(struct device_node *node, int type,
+				       int reg, u32 mask, int value)
+{
+	struct macio_chip*	macio;
+	unsigned long		flags;
+
+	macio = macio_find(node, type);
+	if (!macio)
+		return -ENODEV;
+	LOCK(flags);
+	if (value)
+		MACIO_BIS(reg, mask);
+	else
+		MACIO_BIC(reg, mask);
+	(void)MACIO_IN32(reg);
+	UNLOCK(flags);
+
+	return 0;
+}
+
+#ifndef CONFIG_POWER4
+
+static long ohare_htw_scc_enable(struct device_node *node, long param,
+				 long value)
+{
+	struct macio_chip*	macio;
+	unsigned long		chan_mask;
+	unsigned long		fcr;
+	unsigned long		flags;
+	int			htw, trans;
+	unsigned long		rmask;
+
+	macio = macio_find(node, 0);
+	if (!macio)
+		return -ENODEV;
+	if (!strcmp(node->name, "ch-a"))
+		chan_mask = MACIO_FLAG_SCCA_ON;
+	else if (!strcmp(node->name, "ch-b"))
+		chan_mask = MACIO_FLAG_SCCB_ON;
+	else
+		return -ENODEV;
+
+	htw = (macio->type == macio_heathrow || macio->type == macio_paddington
+		|| macio->type == macio_gatwick);
+	/* On these machines, the HRW_SCC_TRANS_EN_N bit mustn't be touched */
+	trans = (pmac_mb.model_id != PMAC_TYPE_YOSEMITE &&
+		 pmac_mb.model_id != PMAC_TYPE_YIKES);
+	if (value) {
+#ifdef CONFIG_ADB_PMU
+		if ((param & 0xfff) == PMAC_SCC_IRDA)
+			pmu_enable_irled(1);
+#endif /* CONFIG_ADB_PMU */
+		LOCK(flags);
+		fcr = MACIO_IN32(OHARE_FCR);
+		/* Check if scc cell need enabling */
+		if (!(fcr & OH_SCC_ENABLE)) {
+			fcr |= OH_SCC_ENABLE;
+			if (htw) {
+				/* Side effect: this will also power up the
+				 * modem, but it's too messy to figure out on which
+				 * ports this controls the tranceiver and on which
+				 * it controls the modem
+				 */
+				if (trans)
+					fcr &= ~HRW_SCC_TRANS_EN_N;
+				MACIO_OUT32(OHARE_FCR, fcr);
+				fcr |= (rmask = HRW_RESET_SCC);
+				MACIO_OUT32(OHARE_FCR, fcr);
+			} else {
+				fcr |= (rmask = OH_SCC_RESET);
+				MACIO_OUT32(OHARE_FCR, fcr);
+			}
+			UNLOCK(flags);
+			(void)MACIO_IN32(OHARE_FCR);
+			mdelay(15);
+			LOCK(flags);
+			fcr &= ~rmask;
+			MACIO_OUT32(OHARE_FCR, fcr);
+		}
+		if (chan_mask & MACIO_FLAG_SCCA_ON)
+			fcr |= OH_SCCA_IO;
+		if (chan_mask & MACIO_FLAG_SCCB_ON)
+			fcr |= OH_SCCB_IO;
+		MACIO_OUT32(OHARE_FCR, fcr);
+		macio->flags |= chan_mask;
+		UNLOCK(flags);
+		if (param & PMAC_SCC_FLAG_XMON)
+			macio->flags |= MACIO_FLAG_SCC_LOCKED;
+	} else {
+		if (macio->flags & MACIO_FLAG_SCC_LOCKED)
+			return -EPERM;
+		LOCK(flags);
+		fcr = MACIO_IN32(OHARE_FCR);
+		if (chan_mask & MACIO_FLAG_SCCA_ON)
+			fcr &= ~OH_SCCA_IO;
+		if (chan_mask & MACIO_FLAG_SCCB_ON)
+			fcr &= ~OH_SCCB_IO;
+		MACIO_OUT32(OHARE_FCR, fcr);
+		if ((fcr & (OH_SCCA_IO | OH_SCCB_IO)) == 0) {
+			fcr &= ~OH_SCC_ENABLE;
+			if (htw && trans)
+				fcr |= HRW_SCC_TRANS_EN_N;
+			MACIO_OUT32(OHARE_FCR, fcr);
+		}
+		macio->flags &= ~(chan_mask);
+		UNLOCK(flags);
+		mdelay(10);
+#ifdef CONFIG_ADB_PMU
+		if ((param & 0xfff) == PMAC_SCC_IRDA)
+			pmu_enable_irled(0);
+#endif /* CONFIG_ADB_PMU */
+	}
+	return 0;
+}
+
+static long ohare_floppy_enable(struct device_node *node, long param,
+				long value)
+{
+	return simple_feature_tweak(node, macio_ohare,
+		OHARE_FCR, OH_FLOPPY_ENABLE, value);
+}
+
+static long ohare_mesh_enable(struct device_node *node, long param, long value)
+{
+	return simple_feature_tweak(node, macio_ohare,
+		OHARE_FCR, OH_MESH_ENABLE, value);
+}
+
+static long ohare_ide_enable(struct device_node *node, long param, long value)
+{
+	switch(param) {
+	case 0:
+		/* For some reason, setting the bit in set_initial_features()
+		 * doesn't stick. I'm still investigating... --BenH.
+		 */
+		if (value)
+			simple_feature_tweak(node, macio_ohare,
+				OHARE_FCR, OH_IOBUS_ENABLE, 1);
+		return simple_feature_tweak(node, macio_ohare,
+			OHARE_FCR, OH_IDE0_ENABLE, value);
+	case 1:
+		return simple_feature_tweak(node, macio_ohare,
+			OHARE_FCR, OH_BAY_IDE_ENABLE, value);
+	default:
+		return -ENODEV;
+	}
+}
+
+static long ohare_ide_reset(struct device_node *node, long param, long value)
+{
+	switch(param) {
+	case 0:
+		return simple_feature_tweak(node, macio_ohare,
+			OHARE_FCR, OH_IDE0_RESET_N, !value);
+	case 1:
+		return simple_feature_tweak(node, macio_ohare,
+			OHARE_FCR, OH_IDE1_RESET_N, !value);
+	default:
+		return -ENODEV;
+	}
+}
+
+static long ohare_sleep_state(struct device_node *node, long param, long value)
+{
+	struct macio_chip*	macio = &macio_chips[0];
+
+	if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0)
+		return -EPERM;
+	if (value == 1) {
+		MACIO_BIC(OHARE_FCR, OH_IOBUS_ENABLE);
+	} else if (value == 0) {
+		MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
+	}
+
+	return 0;
+}
+
+static long heathrow_modem_enable(struct device_node *node, long param,
+				  long value)
+{
+	struct macio_chip*	macio;
+	u8			gpio;
+	unsigned long		flags;
+
+	macio = macio_find(node, macio_unknown);
+	if (!macio)
+		return -ENODEV;
+	gpio = MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1;
+	if (!value) {
+		LOCK(flags);
+		MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio);
+		UNLOCK(flags);
+		(void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
+		mdelay(250);
+	}
+	if (pmac_mb.model_id != PMAC_TYPE_YOSEMITE &&
+	    pmac_mb.model_id != PMAC_TYPE_YIKES) {
+		LOCK(flags);
+		if (value)
+			MACIO_BIC(HEATHROW_FCR, HRW_SCC_TRANS_EN_N);
+		else
+			MACIO_BIS(HEATHROW_FCR, HRW_SCC_TRANS_EN_N);
+		UNLOCK(flags);
+		(void)MACIO_IN32(HEATHROW_FCR);
+		mdelay(250);
+	}
+	if (value) {
+		LOCK(flags);
+		MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1);
+		(void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
+		UNLOCK(flags); mdelay(250); LOCK(flags);
+		MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio);
+		(void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
+		UNLOCK(flags); mdelay(250); LOCK(flags);
+		MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1);
+		(void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
+		UNLOCK(flags); mdelay(250);
+	}
+	return 0;
+}
+
+static long heathrow_floppy_enable(struct device_node *node, long param,
+				   long value)
+{
+	return simple_feature_tweak(node, macio_unknown,
+		HEATHROW_FCR,
+		HRW_SWIM_ENABLE|HRW_BAY_FLOPPY_ENABLE,
+		value);
+}
+
+static long heathrow_mesh_enable(struct device_node *node, long param,
+				 long value)
+{
+	struct macio_chip*	macio;
+	unsigned long		flags;
+
+	macio = macio_find(node, macio_unknown);
+	if (!macio)
+		return -ENODEV;
+	LOCK(flags);
+	/* Set clear mesh cell enable */
+	if (value)
+		MACIO_BIS(HEATHROW_FCR, HRW_MESH_ENABLE);
+	else
+		MACIO_BIC(HEATHROW_FCR, HRW_MESH_ENABLE);
+	(void)MACIO_IN32(HEATHROW_FCR);
+	udelay(10);
+	/* Set/Clear termination power */
+	if (value)
+		MACIO_BIC(HEATHROW_MBCR, 0x04000000);
+	else
+		MACIO_BIS(HEATHROW_MBCR, 0x04000000);
+	(void)MACIO_IN32(HEATHROW_MBCR);
+	udelay(10);
+	UNLOCK(flags);
+
+	return 0;
+}
+
+static long heathrow_ide_enable(struct device_node *node, long param,
+				long value)
+{
+	switch(param) {
+	case 0:
+		return simple_feature_tweak(node, macio_unknown,
+			HEATHROW_FCR, HRW_IDE0_ENABLE, value);
+	case 1:
+		return simple_feature_tweak(node, macio_unknown,
+			HEATHROW_FCR, HRW_BAY_IDE_ENABLE, value);
+	default:
+		return -ENODEV;
+	}
+}
+
+static long heathrow_ide_reset(struct device_node *node, long param,
+			       long value)
+{
+	switch(param) {
+	case 0:
+		return simple_feature_tweak(node, macio_unknown,
+			HEATHROW_FCR, HRW_IDE0_RESET_N, !value);
+	case 1:
+		return simple_feature_tweak(node, macio_unknown,
+			HEATHROW_FCR, HRW_IDE1_RESET_N, !value);
+	default:
+		return -ENODEV;
+	}
+}
+
+static long heathrow_bmac_enable(struct device_node *node, long param,
+				 long value)
+{
+	struct macio_chip*	macio;
+	unsigned long		flags;
+
+	macio = macio_find(node, 0);
+	if (!macio)
+		return -ENODEV;
+	if (value) {
+		LOCK(flags);
+		MACIO_BIS(HEATHROW_FCR, HRW_BMAC_IO_ENABLE);
+		MACIO_BIS(HEATHROW_FCR, HRW_BMAC_RESET);
+		UNLOCK(flags);
+		(void)MACIO_IN32(HEATHROW_FCR);
+		mdelay(10);
+		LOCK(flags);
+		MACIO_BIC(HEATHROW_FCR, HRW_BMAC_RESET);
+		UNLOCK(flags);
+		(void)MACIO_IN32(HEATHROW_FCR);
+		mdelay(10);
+	} else {
+		LOCK(flags);
+		MACIO_BIC(HEATHROW_FCR, HRW_BMAC_IO_ENABLE);
+		UNLOCK(flags);
+	}
+	return 0;
+}
+
+static long heathrow_sound_enable(struct device_node *node, long param,
+				  long value)
+{
+	struct macio_chip*	macio;
+	unsigned long		flags;
+
+	/* B&W G3 and Yikes don't support that properly (the
+	 * sound appear to never come back after beeing shut down).
+	 */
+	if (pmac_mb.model_id == PMAC_TYPE_YOSEMITE ||
+	    pmac_mb.model_id == PMAC_TYPE_YIKES)
+		return 0;
+
+	macio = macio_find(node, 0);
+	if (!macio)
+		return -ENODEV;
+	if (value) {
+		LOCK(flags);
+		MACIO_BIS(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
+		MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N);
+		UNLOCK(flags);
+		(void)MACIO_IN32(HEATHROW_FCR);
+	} else {
+		LOCK(flags);
+		MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N);
+		MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
+		UNLOCK(flags);
+	}
+	return 0;
+}
+
+static u32 save_fcr[6];
+static u32 save_mbcr;
+static u32 save_gpio_levels[2];
+static u8 save_gpio_extint[KEYLARGO_GPIO_EXTINT_CNT];
+static u8 save_gpio_normal[KEYLARGO_GPIO_CNT];
+static u32 save_unin_clock_ctl;
+static struct dbdma_regs save_dbdma[13];
+static struct dbdma_regs save_alt_dbdma[13];
+
+static void dbdma_save(struct macio_chip *macio, struct dbdma_regs *save)
+{
+	int i;
+
+	/* Save state & config of DBDMA channels */
+	for (i = 0; i < 13; i++) {
+		volatile struct dbdma_regs __iomem * chan = (void __iomem *)
+			(macio->base + ((0x8000+i*0x100)>>2));
+		save[i].cmdptr_hi = in_le32(&chan->cmdptr_hi);
+		save[i].cmdptr = in_le32(&chan->cmdptr);
+		save[i].intr_sel = in_le32(&chan->intr_sel);
+		save[i].br_sel = in_le32(&chan->br_sel);
+		save[i].wait_sel = in_le32(&chan->wait_sel);
+	}
+}
+
+static void dbdma_restore(struct macio_chip *macio, struct dbdma_regs *save)
+{
+	int i;
+
+	/* Save state & config of DBDMA channels */
+	for (i = 0; i < 13; i++) {
+		volatile struct dbdma_regs __iomem * chan = (void __iomem *)
+			(macio->base + ((0x8000+i*0x100)>>2));
+		out_le32(&chan->control, (ACTIVE|DEAD|WAKE|FLUSH|PAUSE|RUN)<<16);
+		while (in_le32(&chan->status) & ACTIVE)
+			mb();
+		out_le32(&chan->cmdptr_hi, save[i].cmdptr_hi);
+		out_le32(&chan->cmdptr, save[i].cmdptr);
+		out_le32(&chan->intr_sel, save[i].intr_sel);
+		out_le32(&chan->br_sel, save[i].br_sel);
+		out_le32(&chan->wait_sel, save[i].wait_sel);
+	}
+}
+
+static void heathrow_sleep(struct macio_chip *macio, int secondary)
+{
+	if (secondary) {
+		dbdma_save(macio, save_alt_dbdma);
+		save_fcr[2] = MACIO_IN32(0x38);
+		save_fcr[3] = MACIO_IN32(0x3c);
+	} else {
+		dbdma_save(macio, save_dbdma);
+		save_fcr[0] = MACIO_IN32(0x38);
+		save_fcr[1] = MACIO_IN32(0x3c);
+		save_mbcr = MACIO_IN32(0x34);
+		/* Make sure sound is shut down */
+		MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N);
+		MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
+		/* This seems to be necessary as well or the fan
+		 * keeps coming up and battery drains fast */
+		MACIO_BIC(HEATHROW_FCR, HRW_IOBUS_ENABLE);
+		MACIO_BIC(HEATHROW_FCR, HRW_IDE0_RESET_N);
+		/* Make sure eth is down even if module or sleep
+		 * won't work properly */
+		MACIO_BIC(HEATHROW_FCR, HRW_BMAC_IO_ENABLE | HRW_BMAC_RESET);
+	}
+	/* Make sure modem is shut down */
+	MACIO_OUT8(HRW_GPIO_MODEM_RESET,
+		MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1);
+	MACIO_BIS(HEATHROW_FCR, HRW_SCC_TRANS_EN_N);
+	MACIO_BIC(HEATHROW_FCR, OH_SCCA_IO|OH_SCCB_IO|HRW_SCC_ENABLE);
+
+	/* Let things settle */
+	(void)MACIO_IN32(HEATHROW_FCR);
+}
+
+static void heathrow_wakeup(struct macio_chip *macio, int secondary)
+{
+	if (secondary) {
+		MACIO_OUT32(0x38, save_fcr[2]);
+		(void)MACIO_IN32(0x38);
+		mdelay(1);
+		MACIO_OUT32(0x3c, save_fcr[3]);
+		(void)MACIO_IN32(0x38);
+		mdelay(10);
+		dbdma_restore(macio, save_alt_dbdma);
+	} else {
+		MACIO_OUT32(0x38, save_fcr[0] | HRW_IOBUS_ENABLE);
+		(void)MACIO_IN32(0x38);
+		mdelay(1);
+		MACIO_OUT32(0x3c, save_fcr[1]);
+		(void)MACIO_IN32(0x38);
+		mdelay(1);
+		MACIO_OUT32(0x34, save_mbcr);
+		(void)MACIO_IN32(0x38);
+		mdelay(10);
+		dbdma_restore(macio, save_dbdma);
+	}
+}
+
+static long heathrow_sleep_state(struct device_node *node, long param,
+				 long value)
+{
+	if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0)
+		return -EPERM;
+	if (value == 1) {
+		if (macio_chips[1].type == macio_gatwick)
+			heathrow_sleep(&macio_chips[0], 1);
+		heathrow_sleep(&macio_chips[0], 0);
+	} else if (value == 0) {
+		heathrow_wakeup(&macio_chips[0], 0);
+		if (macio_chips[1].type == macio_gatwick)
+			heathrow_wakeup(&macio_chips[0], 1);
+	}
+	return 0;
+}
+
+static long core99_scc_enable(struct device_node *node, long param, long value)
+{
+	struct macio_chip*	macio;
+	unsigned long		flags;
+	unsigned long		chan_mask;
+	u32			fcr;
+
+	macio = macio_find(node, 0);
+	if (!macio)
+		return -ENODEV;
+	if (!strcmp(node->name, "ch-a"))
+		chan_mask = MACIO_FLAG_SCCA_ON;
+	else if (!strcmp(node->name, "ch-b"))
+		chan_mask = MACIO_FLAG_SCCB_ON;
+	else
+		return -ENODEV;
+
+	if (value) {
+		int need_reset_scc = 0;
+		int need_reset_irda = 0;
+
+		LOCK(flags);
+		fcr = MACIO_IN32(KEYLARGO_FCR0);
+		/* Check if scc cell need enabling */
+		if (!(fcr & KL0_SCC_CELL_ENABLE)) {
+			fcr |= KL0_SCC_CELL_ENABLE;
+			need_reset_scc = 1;
+		}
+		if (chan_mask & MACIO_FLAG_SCCA_ON) {
+			fcr |= KL0_SCCA_ENABLE;
+			/* Don't enable line drivers for I2S modem */
+			if ((param & 0xfff) == PMAC_SCC_I2S1)
+				fcr &= ~KL0_SCC_A_INTF_ENABLE;
+			else
+				fcr |= KL0_SCC_A_INTF_ENABLE;
+		}
+		if (chan_mask & MACIO_FLAG_SCCB_ON) {
+			fcr |= KL0_SCCB_ENABLE;
+			/* Perform irda specific inits */
+			if ((param & 0xfff) == PMAC_SCC_IRDA) {
+				fcr &= ~KL0_SCC_B_INTF_ENABLE;
+				fcr |= KL0_IRDA_ENABLE;
+				fcr |= KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE;
+				fcr |= KL0_IRDA_SOURCE1_SEL;
+				fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0);
+				fcr &= ~(KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND);
+				need_reset_irda = 1;
+			} else
+				fcr |= KL0_SCC_B_INTF_ENABLE;
+		}
+		MACIO_OUT32(KEYLARGO_FCR0, fcr);
+		macio->flags |= chan_mask;
+		if (need_reset_scc)  {
+			MACIO_BIS(KEYLARGO_FCR0, KL0_SCC_RESET);
+			(void)MACIO_IN32(KEYLARGO_FCR0);
+			UNLOCK(flags);
+			mdelay(15);
+			LOCK(flags);
+			MACIO_BIC(KEYLARGO_FCR0, KL0_SCC_RESET);
+		}
+		if (need_reset_irda)  {
+			MACIO_BIS(KEYLARGO_FCR0, KL0_IRDA_RESET);
+			(void)MACIO_IN32(KEYLARGO_FCR0);
+			UNLOCK(flags);
+			mdelay(15);
+			LOCK(flags);
+			MACIO_BIC(KEYLARGO_FCR0, KL0_IRDA_RESET);
+		}
+		UNLOCK(flags);
+		if (param & PMAC_SCC_FLAG_XMON)
+			macio->flags |= MACIO_FLAG_SCC_LOCKED;
+	} else {
+		if (macio->flags & MACIO_FLAG_SCC_LOCKED)
+			return -EPERM;
+		LOCK(flags);
+		fcr = MACIO_IN32(KEYLARGO_FCR0);
+		if (chan_mask & MACIO_FLAG_SCCA_ON)
+			fcr &= ~KL0_SCCA_ENABLE;
+		if (chan_mask & MACIO_FLAG_SCCB_ON) {
+			fcr &= ~KL0_SCCB_ENABLE;
+			/* Perform irda specific clears */
+			if ((param & 0xfff) == PMAC_SCC_IRDA) {
+				fcr &= ~KL0_IRDA_ENABLE;
+				fcr &= ~(KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE);
+				fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0);
+				fcr &= ~(KL0_IRDA_SOURCE1_SEL|KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND);
+			}
+		}
+		MACIO_OUT32(KEYLARGO_FCR0, fcr);
+		if ((fcr & (KL0_SCCA_ENABLE | KL0_SCCB_ENABLE)) == 0) {
+			fcr &= ~KL0_SCC_CELL_ENABLE;
+			MACIO_OUT32(KEYLARGO_FCR0, fcr);
+		}
+		macio->flags &= ~(chan_mask);
+		UNLOCK(flags);
+		mdelay(10);
+	}
+	return 0;
+}
+
+static long
+core99_modem_enable(struct device_node *node, long param, long value)
+{
+	struct macio_chip*	macio;
+	u8			gpio;
+	unsigned long		flags;
+
+	/* Hack for internal USB modem */
+	if (node == NULL) {
+		if (macio_chips[0].type != macio_keylargo)
+			return -ENODEV;
+		node = macio_chips[0].of_node;
+	}
+	macio = macio_find(node, 0);
+	if (!macio)
+		return -ENODEV;
+	gpio = MACIO_IN8(KL_GPIO_MODEM_RESET);
+	gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE;
+	gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA;
+
+	if (!value) {
+		LOCK(flags);
+		MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
+		UNLOCK(flags);
+		(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+		mdelay(250);
+	}
+	LOCK(flags);
+	if (value) {
+		MACIO_BIC(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
+		UNLOCK(flags);
+		(void)MACIO_IN32(KEYLARGO_FCR2);
+		mdelay(250);
+	} else {
+		MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
+		UNLOCK(flags);
+	}
+	if (value) {
+		LOCK(flags);
+		MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
+		(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+		UNLOCK(flags); mdelay(250); LOCK(flags);
+		MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
+		(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+		UNLOCK(flags); mdelay(250); LOCK(flags);
+		MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
+		(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+		UNLOCK(flags); mdelay(250);
+	}
+	return 0;
+}
+
+static long
+pangea_modem_enable(struct device_node *node, long param, long value)
+{
+	struct macio_chip*	macio;
+	u8			gpio;
+	unsigned long		flags;
+
+	/* Hack for internal USB modem */
+	if (node == NULL) {
+		if (macio_chips[0].type != macio_pangea &&
+		    macio_chips[0].type != macio_intrepid)
+			return -ENODEV;
+		node = macio_chips[0].of_node;
+	}
+	macio = macio_find(node, 0);
+	if (!macio)
+		return -ENODEV;
+	gpio = MACIO_IN8(KL_GPIO_MODEM_RESET);
+	gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE;
+	gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA;
+
+	if (!value) {
+		LOCK(flags);
+		MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
+		UNLOCK(flags);
+		(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+		mdelay(250);
+	}
+	LOCK(flags);
+	if (value) {
+		MACIO_OUT8(KL_GPIO_MODEM_POWER,
+			KEYLARGO_GPIO_OUTPUT_ENABLE);
+		UNLOCK(flags);
+		(void)MACIO_IN32(KEYLARGO_FCR2);
+		mdelay(250);
+	} else {
+		MACIO_OUT8(KL_GPIO_MODEM_POWER,
+			KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA);
+		UNLOCK(flags);
+	}
+	if (value) {
+		LOCK(flags);
+		MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
+		(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+		UNLOCK(flags); mdelay(250); LOCK(flags);
+		MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
+		(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+		UNLOCK(flags); mdelay(250); LOCK(flags);
+		MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
+		(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+		UNLOCK(flags); mdelay(250);
+	}
+	return 0;
+}
+
+static long
+core99_ata100_enable(struct device_node *node, long value)
+{
+	unsigned long flags;
+	struct pci_dev *pdev = NULL;
+	u8 pbus, pid;
+
+	if (uninorth_rev < 0x24)
+		return -ENODEV;
+
+	LOCK(flags);
+	if (value)
+		UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_ATA100);
+	else
+		UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_ATA100);
+	(void)UN_IN(UNI_N_CLOCK_CNTL);
+	UNLOCK(flags);
+	udelay(20);
+
+	if (value) {
+		if (pci_device_from_OF_node(node, &pbus, &pid) == 0)
+			pdev = pci_find_slot(pbus, pid);
+		if (pdev == NULL)
+			return 0;
+		pci_enable_device(pdev);
+		pci_set_master(pdev);
+	}
+	return 0;
+}
+
+static long
+core99_ide_enable(struct device_node *node, long param, long value)
+{
+	/* Bus ID 0 to 2 are KeyLargo based IDE, busID 3 is U2
+	 * based ata-100
+	 */
+	switch(param) {
+	    case 0:
+		return simple_feature_tweak(node, macio_unknown,
+			KEYLARGO_FCR1, KL1_EIDE0_ENABLE, value);
+	    case 1:
+		return simple_feature_tweak(node, macio_unknown,
+			KEYLARGO_FCR1, KL1_EIDE1_ENABLE, value);
+	    case 2:
+		return simple_feature_tweak(node, macio_unknown,
+			KEYLARGO_FCR1, KL1_UIDE_ENABLE, value);
+	    case 3:
+		return core99_ata100_enable(node, value);
+	    default:
+		return -ENODEV;
+	}
+}
+
+static long
+core99_ide_reset(struct device_node *node, long param, long value)
+{
+	switch(param) {
+	    case 0:
+		return simple_feature_tweak(node, macio_unknown,
+			KEYLARGO_FCR1, KL1_EIDE0_RESET_N, !value);
+	    case 1:
+		return simple_feature_tweak(node, macio_unknown,
+			KEYLARGO_FCR1, KL1_EIDE1_RESET_N, !value);
+	    case 2:
+		return simple_feature_tweak(node, macio_unknown,
+			KEYLARGO_FCR1, KL1_UIDE_RESET_N, !value);
+	    default:
+		return -ENODEV;
+	}
+}
+
+static long
+core99_gmac_enable(struct device_node *node, long param, long value)
+{
+	unsigned long flags;
+
+	LOCK(flags);
+	if (value)
+		UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC);
+	else
+		UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC);
+	(void)UN_IN(UNI_N_CLOCK_CNTL);
+	UNLOCK(flags);
+	udelay(20);
+
+	return 0;
+}
+
+static long
+core99_gmac_phy_reset(struct device_node *node, long param, long value)
+{
+	unsigned long flags;
+	struct macio_chip *macio;
+
+	macio = &macio_chips[0];
+	if (macio->type != macio_keylargo && macio->type != macio_pangea &&
+	    macio->type != macio_intrepid)
+		return -ENODEV;
+
+	LOCK(flags);
+	MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, KEYLARGO_GPIO_OUTPUT_ENABLE);
+	(void)MACIO_IN8(KL_GPIO_ETH_PHY_RESET);
+	UNLOCK(flags);
+	mdelay(10);
+	LOCK(flags);
+	MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, /*KEYLARGO_GPIO_OUTPUT_ENABLE | */
+		KEYLARGO_GPIO_OUTOUT_DATA);
+	UNLOCK(flags);
+	mdelay(10);
+
+	return 0;
+}
+
+static long
+core99_sound_chip_enable(struct device_node *node, long param, long value)
+{
+	struct macio_chip*	macio;
+	unsigned long		flags;
+
+	macio = macio_find(node, 0);
+	if (!macio)
+		return -ENODEV;
+
+	/* Do a better probe code, screamer G4 desktops &
+	 * iMacs can do that too, add a recalibrate  in
+	 * the driver as well
+	 */
+	if (pmac_mb.model_id == PMAC_TYPE_PISMO ||
+	    pmac_mb.model_id == PMAC_TYPE_TITANIUM) {
+		LOCK(flags);
+		if (value)
+			MACIO_OUT8(KL_GPIO_SOUND_POWER,
+				KEYLARGO_GPIO_OUTPUT_ENABLE |
+				KEYLARGO_GPIO_OUTOUT_DATA);
+		else
+			MACIO_OUT8(KL_GPIO_SOUND_POWER,
+				KEYLARGO_GPIO_OUTPUT_ENABLE);
+		(void)MACIO_IN8(KL_GPIO_SOUND_POWER);
+		UNLOCK(flags);
+	}
+	return 0;
+}
+
+static long
+core99_airport_enable(struct device_node *node, long param, long value)
+{
+	struct macio_chip*	macio;
+	unsigned long		flags;
+	int			state;
+
+	macio = macio_find(node, 0);
+	if (!macio)
+		return -ENODEV;
+
+	/* Hint: we allow passing of macio itself for the sake of the
+	 * sleep code
+	 */
+	if (node != macio->of_node &&
+	    (!node->parent || node->parent != macio->of_node))
+		return -ENODEV;
+	state = (macio->flags & MACIO_FLAG_AIRPORT_ON) != 0;
+	if (value == state)
+		return 0;
+	if (value) {
+		/* This code is a reproduction of OF enable-cardslot
+		 * and init-wireless methods, slightly hacked until
+		 * I got it working.
+		 */
+		LOCK(flags);
+		MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 5);
+		(void)MACIO_IN8(KEYLARGO_GPIO_0+0xf);
+		UNLOCK(flags);
+		mdelay(10);
+		LOCK(flags);
+		MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 4);
+		(void)MACIO_IN8(KEYLARGO_GPIO_0+0xf);
+		UNLOCK(flags);
+
+		mdelay(10);
+
+		LOCK(flags);
+		MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16);
+		(void)MACIO_IN32(KEYLARGO_FCR2);
+		udelay(10);
+		MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xb, 0);
+		(void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xb);
+		udelay(10);
+		MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xa, 0x28);
+		(void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xa);
+		udelay(10);
+		MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xd, 0x28);
+		(void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xd);
+		udelay(10);
+		MACIO_OUT8(KEYLARGO_GPIO_0+0xd, 0x28);
+		(void)MACIO_IN8(KEYLARGO_GPIO_0+0xd);
+		udelay(10);
+		MACIO_OUT8(KEYLARGO_GPIO_0+0xe, 0x28);
+		(void)MACIO_IN8(KEYLARGO_GPIO_0+0xe);
+		UNLOCK(flags);
+		udelay(10);
+		MACIO_OUT32(0x1c000, 0);
+		mdelay(1);
+		MACIO_OUT8(0x1a3e0, 0x41);
+		(void)MACIO_IN8(0x1a3e0);
+		udelay(10);
+		LOCK(flags);
+		MACIO_BIS(KEYLARGO_FCR2, KL2_CARDSEL_16);
+		(void)MACIO_IN32(KEYLARGO_FCR2);
+		UNLOCK(flags);
+		mdelay(100);
+
+		macio->flags |= MACIO_FLAG_AIRPORT_ON;
+	} else {
+		LOCK(flags);
+		MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16);
+		(void)MACIO_IN32(KEYLARGO_FCR2);
+		MACIO_OUT8(KL_GPIO_AIRPORT_0, 0);
+		MACIO_OUT8(KL_GPIO_AIRPORT_1, 0);
+		MACIO_OUT8(KL_GPIO_AIRPORT_2, 0);
+		MACIO_OUT8(KL_GPIO_AIRPORT_3, 0);
+		MACIO_OUT8(KL_GPIO_AIRPORT_4, 0);
+		(void)MACIO_IN8(KL_GPIO_AIRPORT_4);
+		UNLOCK(flags);
+
+		macio->flags &= ~MACIO_FLAG_AIRPORT_ON;
+	}
+	return 0;
+}
+
+#ifdef CONFIG_SMP
+static long
+core99_reset_cpu(struct device_node *node, long param, long value)
+{
+	unsigned int reset_io = 0;
+	unsigned long flags;
+	struct macio_chip *macio;
+	struct device_node *np;
+	const int dflt_reset_lines[] = {	KL_GPIO_RESET_CPU0,
+						KL_GPIO_RESET_CPU1,
+						KL_GPIO_RESET_CPU2,
+						KL_GPIO_RESET_CPU3 };
+
+	macio = &macio_chips[0];
+	if (macio->type != macio_keylargo)
+		return -ENODEV;
+
+	np = find_path_device("/cpus");
+	if (np == NULL)
+		return -ENODEV;
+	for (np = np->child; np != NULL; np = np->sibling) {
+		u32 *num = (u32 *)get_property(np, "reg", NULL);
+		u32 *rst = (u32 *)get_property(np, "soft-reset", NULL);
+		if (num == NULL || rst == NULL)
+			continue;
+		if (param == *num) {
+			reset_io = *rst;
+			break;
+		}
+	}
+	if (np == NULL || reset_io == 0)
+		reset_io = dflt_reset_lines[param];
+
+	LOCK(flags);
+	MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE);
+	(void)MACIO_IN8(reset_io);
+	udelay(1);
+	MACIO_OUT8(reset_io, 0);
+	(void)MACIO_IN8(reset_io);
+	UNLOCK(flags);
+
+	return 0;
+}
+#endif /* CONFIG_SMP */
+
+static long
+core99_usb_enable(struct device_node *node, long param, long value)
+{
+	struct macio_chip *macio;
+	unsigned long flags;
+	char *prop;
+	int number;
+	u32 reg;
+
+	macio = &macio_chips[0];
+	if (macio->type != macio_keylargo && macio->type != macio_pangea &&
+	    macio->type != macio_intrepid)
+		return -ENODEV;
+
+	prop = (char *)get_property(node, "AAPL,clock-id", NULL);
+	if (!prop)
+		return -ENODEV;
+	if (strncmp(prop, "usb0u048", 8) == 0)
+		number = 0;
+	else if (strncmp(prop, "usb1u148", 8) == 0)
+		number = 2;
+	else if (strncmp(prop, "usb2u248", 8) == 0)
+		number = 4;
+	else
+		return -ENODEV;
+
+	/* Sorry for the brute-force locking, but this is only used during
+	 * sleep and the timing seem to be critical
+	 */
+	LOCK(flags);
+	if (value) {
+		/* Turn ON */
+		if (number == 0) {
+			MACIO_BIC(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1));
+			(void)MACIO_IN32(KEYLARGO_FCR0);
+			UNLOCK(flags);
+			mdelay(1);
+			LOCK(flags);
+			MACIO_BIS(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE);
+		} else if (number == 2) {
+			MACIO_BIC(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1));
+			UNLOCK(flags);
+			(void)MACIO_IN32(KEYLARGO_FCR0);
+			mdelay(1);
+			LOCK(flags);
+			MACIO_BIS(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE);
+		} else if (number == 4) {
+			MACIO_BIC(KEYLARGO_FCR1, (KL1_USB2_PAD_SUSPEND0 | KL1_USB2_PAD_SUSPEND1));
+			UNLOCK(flags);
+			(void)MACIO_IN32(KEYLARGO_FCR1);
+			mdelay(1);
+			LOCK(flags);
+			MACIO_BIS(KEYLARGO_FCR1, KL1_USB2_CELL_ENABLE);
+		}
+		if (number < 4) {
+			reg = MACIO_IN32(KEYLARGO_FCR4);
+			reg &=	~(KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) |
+				KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number));
+			reg &=	~(KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) |
+				KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1));
+			MACIO_OUT32(KEYLARGO_FCR4, reg);
+			(void)MACIO_IN32(KEYLARGO_FCR4);
+			udelay(10);
+		} else {
+			reg = MACIO_IN32(KEYLARGO_FCR3);
+			reg &=	~(KL3_IT_PORT_WAKEUP_ENABLE(0) | KL3_IT_PORT_RESUME_WAKE_EN(0) |
+				KL3_IT_PORT_CONNECT_WAKE_EN(0) | KL3_IT_PORT_DISCONNECT_WAKE_EN(0));
+			reg &=	~(KL3_IT_PORT_WAKEUP_ENABLE(1) | KL3_IT_PORT_RESUME_WAKE_EN(1) |
+				KL3_IT_PORT_CONNECT_WAKE_EN(1) | KL3_IT_PORT_DISCONNECT_WAKE_EN(1));
+			MACIO_OUT32(KEYLARGO_FCR3, reg);
+			(void)MACIO_IN32(KEYLARGO_FCR3);
+			udelay(10);
+		}
+		if (macio->type == macio_intrepid) {
+			/* wait for clock stopped bits to clear */
+			u32 test0 = 0, test1 = 0;
+			u32 status0, status1;
+			int timeout = 1000;
+
+			UNLOCK(flags);
+			switch (number) {
+			case 0:
+				test0 = UNI_N_CLOCK_STOPPED_USB0;
+				test1 = UNI_N_CLOCK_STOPPED_USB0PCI;
+				break;
+			case 2:
+				test0 = UNI_N_CLOCK_STOPPED_USB1;
+				test1 = UNI_N_CLOCK_STOPPED_USB1PCI;
+				break;
+			case 4:
+				test0 = UNI_N_CLOCK_STOPPED_USB2;
+				test1 = UNI_N_CLOCK_STOPPED_USB2PCI;
+				break;
+			}
+			do {
+				if (--timeout <= 0) {
+					printk(KERN_ERR "core99_usb_enable: "
+					       "Timeout waiting for clocks\n");
+					break;
+				}
+				mdelay(1);
+				status0 = UN_IN(UNI_N_CLOCK_STOP_STATUS0);
+				status1 = UN_IN(UNI_N_CLOCK_STOP_STATUS1);
+			} while ((status0 & test0) | (status1 & test1));
+			LOCK(flags);
+		}
+	} else {
+		/* Turn OFF */
+		if (number < 4) {
+			reg = MACIO_IN32(KEYLARGO_FCR4);
+			reg |=	KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) |
+				KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number);
+			reg |=	KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) |
+				KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1);
+			MACIO_OUT32(KEYLARGO_FCR4, reg);
+			(void)MACIO_IN32(KEYLARGO_FCR4);
+			udelay(1);
+		} else {
+			reg = MACIO_IN32(KEYLARGO_FCR3);
+			reg |=	KL3_IT_PORT_WAKEUP_ENABLE(0) | KL3_IT_PORT_RESUME_WAKE_EN(0) |
+				KL3_IT_PORT_CONNECT_WAKE_EN(0) | KL3_IT_PORT_DISCONNECT_WAKE_EN(0);
+			reg |=	KL3_IT_PORT_WAKEUP_ENABLE(1) | KL3_IT_PORT_RESUME_WAKE_EN(1) |
+				KL3_IT_PORT_CONNECT_WAKE_EN(1) | KL3_IT_PORT_DISCONNECT_WAKE_EN(1);
+			MACIO_OUT32(KEYLARGO_FCR3, reg);
+			(void)MACIO_IN32(KEYLARGO_FCR3);
+			udelay(1);
+		}
+		if (number == 0) {
+			if (macio->type != macio_intrepid)
+				MACIO_BIC(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE);
+			(void)MACIO_IN32(KEYLARGO_FCR0);
+			udelay(1);
+			MACIO_BIS(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1));
+			(void)MACIO_IN32(KEYLARGO_FCR0);
+		} else if (number == 2) {
+			if (macio->type != macio_intrepid)
+				MACIO_BIC(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE);
+			(void)MACIO_IN32(KEYLARGO_FCR0);
+			udelay(1);
+			MACIO_BIS(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1));
+			(void)MACIO_IN32(KEYLARGO_FCR0);
+		} else if (number == 4) {
+			udelay(1);
+			MACIO_BIS(KEYLARGO_FCR1, (KL1_USB2_PAD_SUSPEND0 | KL1_USB2_PAD_SUSPEND1));
+			(void)MACIO_IN32(KEYLARGO_FCR1);
+		}
+		udelay(1);
+	}
+	UNLOCK(flags);
+
+	return 0;
+}
+
+static long
+core99_firewire_enable(struct device_node *node, long param, long value)
+{
+	unsigned long flags;
+	struct macio_chip *macio;
+
+	macio = &macio_chips[0];
+	if (macio->type != macio_keylargo && macio->type != macio_pangea &&
+	    macio->type != macio_intrepid)
+		return -ENODEV;
+	if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED))
+		return -ENODEV;
+
+	LOCK(flags);
+	if (value) {
+		UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW);
+		(void)UN_IN(UNI_N_CLOCK_CNTL);
+	} else {
+		UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW);
+		(void)UN_IN(UNI_N_CLOCK_CNTL);
+	}
+	UNLOCK(flags);
+	mdelay(1);
+
+	return 0;
+}
+
+static long
+core99_firewire_cable_power(struct device_node *node, long param, long value)
+{
+	unsigned long flags;
+	struct macio_chip *macio;
+
+	/* Trick: we allow NULL node */
+	if ((pmac_mb.board_flags & PMAC_MB_HAS_FW_POWER) == 0)
+		return -ENODEV;
+	macio = &macio_chips[0];
+	if (macio->type != macio_keylargo && macio->type != macio_pangea &&
+	    macio->type != macio_intrepid)
+		return -ENODEV;
+	if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED))
+		return -ENODEV;
+
+	LOCK(flags);
+	if (value) {
+		MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 0);
+		MACIO_IN8(KL_GPIO_FW_CABLE_POWER);
+		udelay(10);
+	} else {
+		MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 4);
+		MACIO_IN8(KL_GPIO_FW_CABLE_POWER); udelay(10);
+	}
+	UNLOCK(flags);
+	mdelay(1);
+
+	return 0;
+}
+
+static long
+intrepid_aack_delay_enable(struct device_node *node, long param, long value)
+{
+	unsigned long flags;
+
+	if (uninorth_rev < 0xd2)
+		return -ENODEV;
+
+	LOCK(flags);
+	if (param)
+		UN_BIS(UNI_N_AACK_DELAY, UNI_N_AACK_DELAY_ENABLE);
+	else
+		UN_BIC(UNI_N_AACK_DELAY, UNI_N_AACK_DELAY_ENABLE);
+	UNLOCK(flags);
+
+	return 0;
+}
+
+
+#endif /* CONFIG_POWER4 */
+
+static long
+core99_read_gpio(struct device_node *node, long param, long value)
+{
+	struct macio_chip *macio = &macio_chips[0];
+
+	return MACIO_IN8(param);
+}
+
+
+static long
+core99_write_gpio(struct device_node *node, long param, long value)
+{
+	struct macio_chip *macio = &macio_chips[0];
+
+	MACIO_OUT8(param, (u8)(value & 0xff));
+	return 0;
+}
+
+#ifdef CONFIG_POWER4
+static long g5_gmac_enable(struct device_node *node, long param, long value)
+{
+	struct macio_chip *macio = &macio_chips[0];
+	unsigned long flags;
+
+	if (node == NULL)
+		return -ENODEV;
+
+	LOCK(flags);
+	if (value) {
+		MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE);
+		mb();
+		k2_skiplist[0] = NULL;
+	} else {
+		k2_skiplist[0] = node;
+		mb();
+		MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE);
+	}
+	
+	UNLOCK(flags);
+	mdelay(1);
+
+	return 0;
+}
+
+static long g5_fw_enable(struct device_node *node, long param, long value)
+{
+	struct macio_chip *macio = &macio_chips[0];
+	unsigned long flags;
+
+	if (node == NULL)
+		return -ENODEV;
+
+	LOCK(flags);
+	if (value) {
+		MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE);
+		mb();
+		k2_skiplist[1] = NULL;
+	} else {
+		k2_skiplist[1] = node;
+		mb();
+		MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE);
+	}
+	
+	UNLOCK(flags);
+	mdelay(1);
+
+	return 0;
+}
+
+static long g5_mpic_enable(struct device_node *node, long param, long value)
+{
+	unsigned long flags;
+
+	if (node->parent == NULL || strcmp(node->parent->name, "u3"))
+		return 0;
+
+	LOCK(flags);
+	UN_BIS(U3_TOGGLE_REG, U3_MPIC_RESET | U3_MPIC_OUTPUT_ENABLE);
+	UNLOCK(flags);
+
+	return 0;
+}
+
+static long g5_eth_phy_reset(struct device_node *node, long param, long value)
+{
+	struct macio_chip *macio = &macio_chips[0];
+	struct device_node *phy;
+	int need_reset;
+
+	/*
+	 * We must not reset the combo PHYs, only the BCM5221 found in
+	 * the iMac G5.
+	 */
+	phy = of_get_next_child(node, NULL);
+	if (!phy)
+		return -ENODEV;
+	need_reset = device_is_compatible(phy, "B5221");
+	of_node_put(phy);
+	if (!need_reset)
+		return 0;
+
+	/* PHY reset is GPIO 29, not in device-tree unfortunately */
+	MACIO_OUT8(K2_GPIO_EXTINT_0 + 29,
+		   KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA);
+	/* Thankfully, this is now always called at a time when we can
+	 * schedule by sungem.
+	 */
+	msleep(10);
+	MACIO_OUT8(K2_GPIO_EXTINT_0 + 29, 0);
+
+	return 0;
+}
+
+static long g5_i2s_enable(struct device_node *node, long param, long value)
+{
+	/* Very crude implementation for now */
+	struct macio_chip *macio = &macio_chips[0];
+	unsigned long flags;
+
+	if (value == 0)
+		return 0; /* don't disable yet */
+
+	LOCK(flags);
+	MACIO_BIS(KEYLARGO_FCR3, KL3_CLK45_ENABLE | KL3_CLK49_ENABLE |
+		  KL3_I2S0_CLK18_ENABLE);
+	udelay(10);
+	MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_I2S0_CELL_ENABLE |
+		  K2_FCR1_I2S0_CLK_ENABLE_BIT | K2_FCR1_I2S0_ENABLE);
+	udelay(10);
+	MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_I2S0_RESET);
+	UNLOCK(flags);
+	udelay(10);
+
+	return 0;
+}
+
+
+#ifdef CONFIG_SMP
+static long g5_reset_cpu(struct device_node *node, long param, long value)
+{
+	unsigned int reset_io = 0;
+	unsigned long flags;
+	struct macio_chip *macio;
+	struct device_node *np;
+
+	macio = &macio_chips[0];
+	if (macio->type != macio_keylargo2)
+		return -ENODEV;
+
+	np = find_path_device("/cpus");
+	if (np == NULL)
+		return -ENODEV;
+	for (np = np->child; np != NULL; np = np->sibling) {
+		u32 *num = (u32 *)get_property(np, "reg", NULL);
+		u32 *rst = (u32 *)get_property(np, "soft-reset", NULL);
+		if (num == NULL || rst == NULL)
+			continue;
+		if (param == *num) {
+			reset_io = *rst;
+			break;
+		}
+	}
+	if (np == NULL || reset_io == 0)
+		return -ENODEV;
+
+	LOCK(flags);
+	MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE);
+	(void)MACIO_IN8(reset_io);
+	udelay(1);
+	MACIO_OUT8(reset_io, 0);
+	(void)MACIO_IN8(reset_io);
+	UNLOCK(flags);
+
+	return 0;
+}
+#endif /* CONFIG_SMP */
+
+/*
+ * This can be called from pmac_smp so isn't static
+ *
+ * This takes the second CPU off the bus on dual CPU machines
+ * running UP
+ */
+void g5_phy_disable_cpu1(void)
+{
+	UN_OUT(U3_API_PHY_CONFIG_1, 0);
+}
+#endif /* CONFIG_POWER4 */
+
+#ifndef CONFIG_POWER4
+
+static void
+keylargo_shutdown(struct macio_chip *macio, int sleep_mode)
+{
+	u32 temp;
+
+	if (sleep_mode) {
+		mdelay(1);
+		MACIO_BIS(KEYLARGO_FCR0, KL0_USB_REF_SUSPEND);
+		(void)MACIO_IN32(KEYLARGO_FCR0);
+		mdelay(1);
+	}
+
+	MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE |
+				KL0_SCC_CELL_ENABLE |
+				KL0_IRDA_ENABLE | KL0_IRDA_CLK32_ENABLE |
+				KL0_IRDA_CLK19_ENABLE);
+
+	MACIO_BIC(KEYLARGO_MBCR, KL_MBCR_MB0_DEV_MASK);
+	MACIO_BIS(KEYLARGO_MBCR, KL_MBCR_MB0_IDE_ENABLE);
+
+	MACIO_BIC(KEYLARGO_FCR1,
+		KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT |
+		KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE |
+		KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT |
+		KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE |
+		KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE |
+		KL1_EIDE0_ENABLE | KL1_EIDE0_RESET_N |
+		KL1_EIDE1_ENABLE | KL1_EIDE1_RESET_N |
+		KL1_UIDE_ENABLE);
+
+	MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
+	MACIO_BIC(KEYLARGO_FCR2, KL2_IOBUS_ENABLE);
+
+	temp = MACIO_IN32(KEYLARGO_FCR3);
+	if (macio->rev >= 2) {
+		temp |= KL3_SHUTDOWN_PLL2X;
+		if (sleep_mode)
+			temp |= KL3_SHUTDOWN_PLL_TOTAL;
+	}
+
+	temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 |
+		KL3_SHUTDOWN_PLLKW35;
+	if (sleep_mode)
+		temp |= KL3_SHUTDOWN_PLLKW12;
+	temp &= ~(KL3_CLK66_ENABLE | KL3_CLK49_ENABLE | KL3_CLK45_ENABLE
+		| KL3_CLK31_ENABLE | KL3_I2S1_CLK18_ENABLE | KL3_I2S0_CLK18_ENABLE);
+	if (sleep_mode)
+		temp &= ~(KL3_TIMER_CLK18_ENABLE | KL3_VIA_CLK16_ENABLE);
+	MACIO_OUT32(KEYLARGO_FCR3, temp);
+
+	/* Flush posted writes & wait a bit */
+	(void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1);
+}
+
+static void
+pangea_shutdown(struct macio_chip *macio, int sleep_mode)
+{
+	u32 temp;
+
+	MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE |
+				KL0_SCC_CELL_ENABLE |
+				KL0_USB0_CELL_ENABLE | KL0_USB1_CELL_ENABLE);
+
+	MACIO_BIC(KEYLARGO_FCR1,
+		KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT |
+		KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE |
+		KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT |
+		KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE |
+		KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE |
+		KL1_UIDE_ENABLE);
+	if (pmac_mb.board_flags & PMAC_MB_MOBILE)
+		MACIO_BIC(KEYLARGO_FCR1, KL1_UIDE_RESET_N);
+
+	MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
+
+	temp = MACIO_IN32(KEYLARGO_FCR3);
+	temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 |
+		KL3_SHUTDOWN_PLLKW35;
+	temp &= ~(KL3_CLK49_ENABLE | KL3_CLK45_ENABLE | KL3_CLK31_ENABLE
+		| KL3_I2S0_CLK18_ENABLE | KL3_I2S1_CLK18_ENABLE);
+	if (sleep_mode)
+		temp &= ~(KL3_VIA_CLK16_ENABLE | KL3_TIMER_CLK18_ENABLE);
+	MACIO_OUT32(KEYLARGO_FCR3, temp);
+
+	/* Flush posted writes & wait a bit */
+	(void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1);
+}
+
+static void
+intrepid_shutdown(struct macio_chip *macio, int sleep_mode)
+{
+	u32 temp;
+
+	MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE |
+		  KL0_SCC_CELL_ENABLE);
+
+	MACIO_BIC(KEYLARGO_FCR1,
+		  /*KL1_USB2_CELL_ENABLE |*/
+		KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT |
+		KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE |
+		KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE);
+	if (pmac_mb.board_flags & PMAC_MB_MOBILE)
+		MACIO_BIC(KEYLARGO_FCR1, KL1_UIDE_RESET_N);
+
+	temp = MACIO_IN32(KEYLARGO_FCR3);
+	temp &= ~(KL3_CLK49_ENABLE | KL3_CLK45_ENABLE |
+		  KL3_I2S1_CLK18_ENABLE | KL3_I2S0_CLK18_ENABLE);
+	if (sleep_mode)
+		temp &= ~(KL3_TIMER_CLK18_ENABLE | KL3_IT_VIA_CLK32_ENABLE);
+	MACIO_OUT32(KEYLARGO_FCR3, temp);
+
+	/* Flush posted writes & wait a bit */
+	(void)MACIO_IN32(KEYLARGO_FCR0);
+	mdelay(10);
+}
+
+
+void pmac_tweak_clock_spreading(int enable)
+{
+	struct macio_chip *macio = &macio_chips[0];
+
+	/* Hack for doing clock spreading on some machines PowerBooks and
+	 * iBooks. This implements the "platform-do-clockspreading" OF
+	 * property as decoded manually on various models. For safety, we also
+	 * check the product ID in the device-tree in cases we'll whack the i2c
+	 * chip to make reasonably sure we won't set wrong values in there
+	 *
+	 * Of course, ultimately, we have to implement a real parser for
+	 * the platform-do-* stuff...
+	 */
+
+	if (macio->type == macio_intrepid) {
+		if (enable)
+			UN_OUT(UNI_N_CLOCK_SPREADING, 2);
+		else
+			UN_OUT(UNI_N_CLOCK_SPREADING, 0);
+		mdelay(40);
+	}
+
+	while (machine_is_compatible("PowerBook5,2") ||
+	       machine_is_compatible("PowerBook5,3") ||
+	       machine_is_compatible("PowerBook6,2") ||
+	       machine_is_compatible("PowerBook6,3")) {
+		struct device_node *ui2c = of_find_node_by_type(NULL, "i2c");
+		struct device_node *dt = of_find_node_by_name(NULL, "device-tree");
+		u8 buffer[9];
+		u32 *productID;
+		int i, rc, changed = 0;
+
+		if (dt == NULL)
+			break;
+		productID = (u32 *)get_property(dt, "pid#", NULL);
+		if (productID == NULL)
+			break;
+		while(ui2c) {
+			struct device_node *p = of_get_parent(ui2c);
+			if (p && !strcmp(p->name, "uni-n"))
+				break;
+			ui2c = of_find_node_by_type(ui2c, "i2c");
+		}
+		if (ui2c == NULL)
+			break;
+		DBG("Trying to bump clock speed for PID: %08x...\n", *productID);
+		rc = pmac_low_i2c_open(ui2c, 1);
+		if (rc != 0)
+			break;
+		pmac_low_i2c_setmode(ui2c, pmac_low_i2c_mode_combined);
+		rc = pmac_low_i2c_xfer(ui2c, 0xd2 | pmac_low_i2c_read, 0x80, buffer, 9);
+		DBG("read result: %d,", rc);
+		if (rc != 0) {
+			pmac_low_i2c_close(ui2c);
+			break;
+		}
+		for (i=0; i<9; i++)
+			DBG(" %02x", buffer[i]);
+		DBG("\n");
+
+		switch(*productID) {
+		case 0x1182:	/* AlBook 12" rev 2 */
+		case 0x1183:	/* iBook G4 12" */
+			buffer[0] = (buffer[0] & 0x8f) | 0x70;
+			buffer[2] = (buffer[2] & 0x7f) | 0x00;
+			buffer[5] = (buffer[5] & 0x80) | 0x31;
+			buffer[6] = (buffer[6] & 0x40) | 0xb0;
+			buffer[7] = (buffer[7] & 0x00) | (enable ? 0xc0 : 0xba);
+			buffer[8] = (buffer[8] & 0x00) | 0x30;
+			changed = 1;
+			break;
+		case 0x3142:	/* AlBook 15" (ATI M10) */
+		case 0x3143:	/* AlBook 17" (ATI M10) */
+			buffer[0] = (buffer[0] & 0xaf) | 0x50;
+			buffer[2] = (buffer[2] & 0x7f) | 0x00;
+			buffer[5] = (buffer[5] & 0x80) | 0x31;
+			buffer[6] = (buffer[6] & 0x40) | 0xb0;
+			buffer[7] = (buffer[7] & 0x00) | (enable ? 0xd0 : 0xc0);
+			buffer[8] = (buffer[8] & 0x00) | 0x30;
+			changed = 1;
+			break;
+		default:
+			DBG("i2c-hwclock: Machine model not handled\n");
+			break;
+		}
+		if (!changed) {
+			pmac_low_i2c_close(ui2c);
+			break;
+		}
+		pmac_low_i2c_setmode(ui2c, pmac_low_i2c_mode_stdsub);
+		rc = pmac_low_i2c_xfer(ui2c, 0xd2 | pmac_low_i2c_write, 0x80, buffer, 9);
+		DBG("write result: %d,", rc);
+		pmac_low_i2c_setmode(ui2c, pmac_low_i2c_mode_combined);
+		rc = pmac_low_i2c_xfer(ui2c, 0xd2 | pmac_low_i2c_read, 0x80, buffer, 9);
+		DBG("read result: %d,", rc);
+		if (rc != 0) {
+			pmac_low_i2c_close(ui2c);
+			break;
+		}
+		for (i=0; i<9; i++)
+			DBG(" %02x", buffer[i]);
+		pmac_low_i2c_close(ui2c);
+		break;
+	}
+}
+
+
+static int
+core99_sleep(void)
+{
+	struct macio_chip *macio;
+	int i;
+
+	macio = &macio_chips[0];
+	if (macio->type != macio_keylargo && macio->type != macio_pangea &&
+	    macio->type != macio_intrepid)
+		return -ENODEV;
+
+	/* We power off the wireless slot in case it was not done
+	 * by the driver. We don't power it on automatically however
+	 */
+	if (macio->flags & MACIO_FLAG_AIRPORT_ON)
+		core99_airport_enable(macio->of_node, 0, 0);
+
+	/* We power off the FW cable. Should be done by the driver... */
+	if (macio->flags & MACIO_FLAG_FW_SUPPORTED) {
+		core99_firewire_enable(NULL, 0, 0);
+		core99_firewire_cable_power(NULL, 0, 0);
+	}
+
+	/* We make sure int. modem is off (in case driver lost it) */
+	if (macio->type == macio_keylargo)
+		core99_modem_enable(macio->of_node, 0, 0);
+	else
+		pangea_modem_enable(macio->of_node, 0, 0);
+
+	/* We make sure the sound is off as well */
+	core99_sound_chip_enable(macio->of_node, 0, 0);
+
+	/*
+	 * Save various bits of KeyLargo
+	 */
+
+	/* Save the state of the various GPIOs */
+	save_gpio_levels[0] = MACIO_IN32(KEYLARGO_GPIO_LEVELS0);
+	save_gpio_levels[1] = MACIO_IN32(KEYLARGO_GPIO_LEVELS1);
+	for (i=0; i<KEYLARGO_GPIO_EXTINT_CNT; i++)
+		save_gpio_extint[i] = MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+i);
+	for (i=0; i<KEYLARGO_GPIO_CNT; i++)
+		save_gpio_normal[i] = MACIO_IN8(KEYLARGO_GPIO_0+i);
+
+	/* Save the FCRs */
+	if (macio->type == macio_keylargo)
+		save_mbcr = MACIO_IN32(KEYLARGO_MBCR);
+	save_fcr[0] = MACIO_IN32(KEYLARGO_FCR0);
+	save_fcr[1] = MACIO_IN32(KEYLARGO_FCR1);
+	save_fcr[2] = MACIO_IN32(KEYLARGO_FCR2);
+	save_fcr[3] = MACIO_IN32(KEYLARGO_FCR3);
+	save_fcr[4] = MACIO_IN32(KEYLARGO_FCR4);
+	if (macio->type == macio_pangea || macio->type == macio_intrepid)
+		save_fcr[5] = MACIO_IN32(KEYLARGO_FCR5);
+
+	/* Save state & config of DBDMA channels */
+	dbdma_save(macio, save_dbdma);
+
+	/*
+	 * Turn off as much as we can
+	 */
+	if (macio->type == macio_pangea)
+		pangea_shutdown(macio, 1);
+	else if (macio->type == macio_intrepid)
+		intrepid_shutdown(macio, 1);
+	else if (macio->type == macio_keylargo)
+		keylargo_shutdown(macio, 1);
+
+	/*
+	 * Put the host bridge to sleep
+	 */
+
+	save_unin_clock_ctl = UN_IN(UNI_N_CLOCK_CNTL);
+	/* Note: do not switch GMAC off, driver does it when necessary, WOL must keep it
+	 * enabled !
+	 */
+	UN_OUT(UNI_N_CLOCK_CNTL, save_unin_clock_ctl &
+	       ~(/*UNI_N_CLOCK_CNTL_GMAC|*/UNI_N_CLOCK_CNTL_FW/*|UNI_N_CLOCK_CNTL_PCI*/));
+	udelay(100);
+	UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_SLEEPING);
+	UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_SLEEP);
+	mdelay(10);
+
+	/*
+	 * FIXME: A bit of black magic with OpenPIC (don't ask me why)
+	 */
+	if (pmac_mb.model_id == PMAC_TYPE_SAWTOOTH) {
+		MACIO_BIS(0x506e0, 0x00400000);
+		MACIO_BIS(0x506e0, 0x80000000);
+	}
+	return 0;
+}
+
+static int
+core99_wake_up(void)
+{
+	struct macio_chip *macio;
+	int i;
+
+	macio = &macio_chips[0];
+	if (macio->type != macio_keylargo && macio->type != macio_pangea &&
+	    macio->type != macio_intrepid)
+		return -ENODEV;
+
+	/*
+	 * Wakeup the host bridge
+	 */
+	UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_NORMAL);
+	udelay(10);
+	UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_RUNNING);
+	udelay(10);
+
+	/*
+	 * Restore KeyLargo
+	 */
+
+	if (macio->type == macio_keylargo) {
+		MACIO_OUT32(KEYLARGO_MBCR, save_mbcr);
+		(void)MACIO_IN32(KEYLARGO_MBCR); udelay(10);
+	}
+	MACIO_OUT32(KEYLARGO_FCR0, save_fcr[0]);
+	(void)MACIO_IN32(KEYLARGO_FCR0); udelay(10);
+	MACIO_OUT32(KEYLARGO_FCR1, save_fcr[1]);
+	(void)MACIO_IN32(KEYLARGO_FCR1); udelay(10);
+	MACIO_OUT32(KEYLARGO_FCR2, save_fcr[2]);
+	(void)MACIO_IN32(KEYLARGO_FCR2); udelay(10);
+	MACIO_OUT32(KEYLARGO_FCR3, save_fcr[3]);
+	(void)MACIO_IN32(KEYLARGO_FCR3); udelay(10);
+	MACIO_OUT32(KEYLARGO_FCR4, save_fcr[4]);
+	(void)MACIO_IN32(KEYLARGO_FCR4); udelay(10);
+	if (macio->type == macio_pangea || macio->type == macio_intrepid) {
+		MACIO_OUT32(KEYLARGO_FCR5, save_fcr[5]);
+		(void)MACIO_IN32(KEYLARGO_FCR5); udelay(10);
+	}
+
+	dbdma_restore(macio, save_dbdma);
+
+	MACIO_OUT32(KEYLARGO_GPIO_LEVELS0, save_gpio_levels[0]);
+	MACIO_OUT32(KEYLARGO_GPIO_LEVELS1, save_gpio_levels[1]);
+	for (i=0; i<KEYLARGO_GPIO_EXTINT_CNT; i++)
+		MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+i, save_gpio_extint[i]);
+	for (i=0; i<KEYLARGO_GPIO_CNT; i++)
+		MACIO_OUT8(KEYLARGO_GPIO_0+i, save_gpio_normal[i]);
+
+	/* FIXME more black magic with OpenPIC ... */
+	if (pmac_mb.model_id == PMAC_TYPE_SAWTOOTH) {
+		MACIO_BIC(0x506e0, 0x00400000);
+		MACIO_BIC(0x506e0, 0x80000000);
+	}
+
+	UN_OUT(UNI_N_CLOCK_CNTL, save_unin_clock_ctl);
+	udelay(100);
+
+	return 0;
+}
+
+static long
+core99_sleep_state(struct device_node *node, long param, long value)
+{
+	/* Param == 1 means to enter the "fake sleep" mode that is
+	 * used for CPU speed switch
+	 */
+	if (param == 1) {
+		if (value == 1) {
+			UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_SLEEPING);
+			UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_IDLE2);
+		} else {
+			UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_NORMAL);
+			udelay(10);
+			UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_RUNNING);
+			udelay(10);
+		}
+		return 0;
+	}
+	if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0)
+		return -EPERM;
+
+	if (value == 1)
+		return core99_sleep();
+	else if (value == 0)
+		return core99_wake_up();
+	return 0;
+}
+
+#endif /* CONFIG_POWER4 */
+
+static long
+generic_dev_can_wake(struct device_node *node, long param, long value)
+{
+	/* Todo: eventually check we are really dealing with on-board
+	 * video device ...
+	 */
+
+	if (pmac_mb.board_flags & PMAC_MB_MAY_SLEEP)
+		pmac_mb.board_flags |= PMAC_MB_CAN_SLEEP;
+	return 0;
+}
+
+static long generic_get_mb_info(struct device_node *node, long param, long value)
+{
+	switch(param) {
+		case PMAC_MB_INFO_MODEL:
+			return pmac_mb.model_id;
+		case PMAC_MB_INFO_FLAGS:
+			return pmac_mb.board_flags;
+		case PMAC_MB_INFO_NAME:
+			/* hack hack hack... but should work */
+			*((const char **)value) = pmac_mb.model_name;
+			return 0;
+	}
+	return -EINVAL;
+}
+
+
+/*
+ * Table definitions
+ */
+
+/* Used on any machine
+ */
+static struct feature_table_entry any_features[] = {
+	{ PMAC_FTR_GET_MB_INFO,		generic_get_mb_info },
+	{ PMAC_FTR_DEVICE_CAN_WAKE,	generic_dev_can_wake },
+	{ 0, NULL }
+};
+
+#ifndef CONFIG_POWER4
+
+/* OHare based motherboards. Currently, we only use these on the
+ * 2400,3400 and 3500 series powerbooks. Some older desktops seem
+ * to have issues with turning on/off those asic cells
+ */
+static struct feature_table_entry ohare_features[] = {
+	{ PMAC_FTR_SCC_ENABLE,		ohare_htw_scc_enable },
+	{ PMAC_FTR_SWIM3_ENABLE,	ohare_floppy_enable },
+	{ PMAC_FTR_MESH_ENABLE,		ohare_mesh_enable },
+	{ PMAC_FTR_IDE_ENABLE,		ohare_ide_enable},
+	{ PMAC_FTR_IDE_RESET,		ohare_ide_reset},
+	{ PMAC_FTR_SLEEP_STATE,		ohare_sleep_state },
+	{ 0, NULL }
+};
+
+/* Heathrow desktop machines (Beige G3).
+ * Separated as some features couldn't be properly tested
+ * and the serial port control bits appear to confuse it.
+ */
+static struct feature_table_entry heathrow_desktop_features[] = {
+	{ PMAC_FTR_SWIM3_ENABLE,	heathrow_floppy_enable },
+	{ PMAC_FTR_MESH_ENABLE,		heathrow_mesh_enable },
+	{ PMAC_FTR_IDE_ENABLE,		heathrow_ide_enable },
+	{ PMAC_FTR_IDE_RESET,		heathrow_ide_reset },
+	{ PMAC_FTR_BMAC_ENABLE,		heathrow_bmac_enable },
+	{ 0, NULL }
+};
+
+/* Heathrow based laptop, that is the Wallstreet and mainstreet
+ * powerbooks.
+ */
+static struct feature_table_entry heathrow_laptop_features[] = {
+	{ PMAC_FTR_SCC_ENABLE,		ohare_htw_scc_enable },
+	{ PMAC_FTR_MODEM_ENABLE,	heathrow_modem_enable },
+	{ PMAC_FTR_SWIM3_ENABLE,	heathrow_floppy_enable },
+	{ PMAC_FTR_MESH_ENABLE,		heathrow_mesh_enable },
+	{ PMAC_FTR_IDE_ENABLE,		heathrow_ide_enable },
+	{ PMAC_FTR_IDE_RESET,		heathrow_ide_reset },
+	{ PMAC_FTR_BMAC_ENABLE,		heathrow_bmac_enable },
+	{ PMAC_FTR_SOUND_CHIP_ENABLE,	heathrow_sound_enable },
+	{ PMAC_FTR_SLEEP_STATE,		heathrow_sleep_state },
+	{ 0, NULL }
+};
+
+/* Paddington based machines
+ * The lombard (101) powerbook, first iMac models, B&W G3 and Yikes G4.
+ */
+static struct feature_table_entry paddington_features[] = {
+	{ PMAC_FTR_SCC_ENABLE,		ohare_htw_scc_enable },
+	{ PMAC_FTR_MODEM_ENABLE,	heathrow_modem_enable },
+	{ PMAC_FTR_SWIM3_ENABLE,	heathrow_floppy_enable },
+	{ PMAC_FTR_MESH_ENABLE,		heathrow_mesh_enable },
+	{ PMAC_FTR_IDE_ENABLE,		heathrow_ide_enable },
+	{ PMAC_FTR_IDE_RESET,		heathrow_ide_reset },
+	{ PMAC_FTR_BMAC_ENABLE,		heathrow_bmac_enable },
+	{ PMAC_FTR_SOUND_CHIP_ENABLE,	heathrow_sound_enable },
+	{ PMAC_FTR_SLEEP_STATE,		heathrow_sleep_state },
+	{ 0, NULL }
+};
+
+/* Core99 & MacRISC 2 machines (all machines released since the
+ * iBook (included), that is all AGP machines, except pangea
+ * chipset. The pangea chipset is the "combo" UniNorth/KeyLargo
+ * used on iBook2 & iMac "flow power".
+ */
+static struct feature_table_entry core99_features[] = {
+	{ PMAC_FTR_SCC_ENABLE,		core99_scc_enable },
+	{ PMAC_FTR_MODEM_ENABLE,	core99_modem_enable },
+	{ PMAC_FTR_IDE_ENABLE,		core99_ide_enable },
+	{ PMAC_FTR_IDE_RESET,		core99_ide_reset },
+	{ PMAC_FTR_GMAC_ENABLE,		core99_gmac_enable },
+	{ PMAC_FTR_GMAC_PHY_RESET,	core99_gmac_phy_reset },
+	{ PMAC_FTR_SOUND_CHIP_ENABLE,	core99_sound_chip_enable },
+	{ PMAC_FTR_AIRPORT_ENABLE,	core99_airport_enable },
+	{ PMAC_FTR_USB_ENABLE,		core99_usb_enable },
+	{ PMAC_FTR_1394_ENABLE,		core99_firewire_enable },
+	{ PMAC_FTR_1394_CABLE_POWER,	core99_firewire_cable_power },
+	{ PMAC_FTR_SLEEP_STATE,		core99_sleep_state },
+#ifdef CONFIG_SMP
+	{ PMAC_FTR_RESET_CPU,		core99_reset_cpu },
+#endif /* CONFIG_SMP */
+	{ PMAC_FTR_READ_GPIO,		core99_read_gpio },
+	{ PMAC_FTR_WRITE_GPIO,		core99_write_gpio },
+	{ 0, NULL }
+};
+
+/* RackMac
+ */
+static struct feature_table_entry rackmac_features[] = {
+	{ PMAC_FTR_SCC_ENABLE,		core99_scc_enable },
+	{ PMAC_FTR_IDE_ENABLE,		core99_ide_enable },
+	{ PMAC_FTR_IDE_RESET,		core99_ide_reset },
+	{ PMAC_FTR_GMAC_ENABLE,		core99_gmac_enable },
+	{ PMAC_FTR_GMAC_PHY_RESET,	core99_gmac_phy_reset },
+	{ PMAC_FTR_USB_ENABLE,		core99_usb_enable },
+	{ PMAC_FTR_1394_ENABLE,		core99_firewire_enable },
+	{ PMAC_FTR_1394_CABLE_POWER,	core99_firewire_cable_power },
+	{ PMAC_FTR_SLEEP_STATE,		core99_sleep_state },
+#ifdef CONFIG_SMP
+	{ PMAC_FTR_RESET_CPU,		core99_reset_cpu },
+#endif /* CONFIG_SMP */
+	{ PMAC_FTR_READ_GPIO,		core99_read_gpio },
+	{ PMAC_FTR_WRITE_GPIO,		core99_write_gpio },
+	{ 0, NULL }
+};
+
+/* Pangea features
+ */
+static struct feature_table_entry pangea_features[] = {
+	{ PMAC_FTR_SCC_ENABLE,		core99_scc_enable },
+	{ PMAC_FTR_MODEM_ENABLE,	pangea_modem_enable },
+	{ PMAC_FTR_IDE_ENABLE,		core99_ide_enable },
+	{ PMAC_FTR_IDE_RESET,		core99_ide_reset },
+	{ PMAC_FTR_GMAC_ENABLE,		core99_gmac_enable },
+	{ PMAC_FTR_GMAC_PHY_RESET,	core99_gmac_phy_reset },
+	{ PMAC_FTR_SOUND_CHIP_ENABLE,	core99_sound_chip_enable },
+	{ PMAC_FTR_AIRPORT_ENABLE,	core99_airport_enable },
+	{ PMAC_FTR_USB_ENABLE,		core99_usb_enable },
+	{ PMAC_FTR_1394_ENABLE,		core99_firewire_enable },
+	{ PMAC_FTR_1394_CABLE_POWER,	core99_firewire_cable_power },
+	{ PMAC_FTR_SLEEP_STATE,		core99_sleep_state },
+	{ PMAC_FTR_READ_GPIO,		core99_read_gpio },
+	{ PMAC_FTR_WRITE_GPIO,		core99_write_gpio },
+	{ 0, NULL }
+};
+
+/* Intrepid features
+ */
+static struct feature_table_entry intrepid_features[] = {
+	{ PMAC_FTR_SCC_ENABLE,		core99_scc_enable },
+	{ PMAC_FTR_MODEM_ENABLE,	pangea_modem_enable },
+	{ PMAC_FTR_IDE_ENABLE,		core99_ide_enable },
+	{ PMAC_FTR_IDE_RESET,		core99_ide_reset },
+	{ PMAC_FTR_GMAC_ENABLE,		core99_gmac_enable },
+	{ PMAC_FTR_GMAC_PHY_RESET,	core99_gmac_phy_reset },
+	{ PMAC_FTR_SOUND_CHIP_ENABLE,	core99_sound_chip_enable },
+	{ PMAC_FTR_AIRPORT_ENABLE,	core99_airport_enable },
+	{ PMAC_FTR_USB_ENABLE,		core99_usb_enable },
+	{ PMAC_FTR_1394_ENABLE,		core99_firewire_enable },
+	{ PMAC_FTR_1394_CABLE_POWER,	core99_firewire_cable_power },
+	{ PMAC_FTR_SLEEP_STATE,		core99_sleep_state },
+	{ PMAC_FTR_READ_GPIO,		core99_read_gpio },
+	{ PMAC_FTR_WRITE_GPIO,		core99_write_gpio },
+	{ PMAC_FTR_AACK_DELAY_ENABLE,	intrepid_aack_delay_enable },
+	{ 0, NULL }
+};
+
+#else /* CONFIG_POWER4 */
+
+/* G5 features
+ */
+static struct feature_table_entry g5_features[] = {
+	{ PMAC_FTR_GMAC_ENABLE,		g5_gmac_enable },
+	{ PMAC_FTR_1394_ENABLE,		g5_fw_enable },
+	{ PMAC_FTR_ENABLE_MPIC,		g5_mpic_enable },
+	{ PMAC_FTR_GMAC_PHY_RESET,	g5_eth_phy_reset },
+	{ PMAC_FTR_SOUND_CHIP_ENABLE,	g5_i2s_enable },
+#ifdef CONFIG_SMP
+	{ PMAC_FTR_RESET_CPU,		g5_reset_cpu },
+#endif /* CONFIG_SMP */
+	{ PMAC_FTR_READ_GPIO,		core99_read_gpio },
+	{ PMAC_FTR_WRITE_GPIO,		core99_write_gpio },
+	{ 0, NULL }
+};
+
+#endif /* CONFIG_POWER4 */
+
+static struct pmac_mb_def pmac_mb_defs[] = {
+#ifndef CONFIG_POWER4
+	/*
+	 * Desktops
+	 */
+
+	{	"AAPL,8500",			"PowerMac 8500/8600",
+		PMAC_TYPE_PSURGE,		NULL,
+		0
+	},
+	{	"AAPL,9500",			"PowerMac 9500/9600",
+		PMAC_TYPE_PSURGE,		NULL,
+		0
+	},
+	{	"AAPL,7200",			"PowerMac 7200",
+		PMAC_TYPE_PSURGE,		NULL,
+		0
+	},
+	{	"AAPL,7300",			"PowerMac 7200/7300",
+		PMAC_TYPE_PSURGE,		NULL,
+		0
+	},
+	{	"AAPL,7500",			"PowerMac 7500",
+		PMAC_TYPE_PSURGE,		NULL,
+		0
+	},
+	{	"AAPL,ShinerESB",		"Apple Network Server",
+		PMAC_TYPE_ANS,			NULL,
+		0
+	},
+	{	"AAPL,e407",			"Alchemy",
+		PMAC_TYPE_ALCHEMY,		NULL,
+		0
+	},
+	{	"AAPL,e411",			"Gazelle",
+		PMAC_TYPE_GAZELLE,		NULL,
+		0
+	},
+	{	"AAPL,Gossamer",		"PowerMac G3 (Gossamer)",
+		PMAC_TYPE_GOSSAMER,		heathrow_desktop_features,
+		0
+	},
+	{	"AAPL,PowerMac G3",		"PowerMac G3 (Silk)",
+		PMAC_TYPE_SILK,			heathrow_desktop_features,
+		0
+	},
+	{	"PowerMac1,1",			"Blue&White G3",
+		PMAC_TYPE_YOSEMITE,		paddington_features,
+		0
+	},
+	{	"PowerMac1,2",			"PowerMac G4 PCI Graphics",
+		PMAC_TYPE_YIKES,		paddington_features,
+		0
+	},
+	{	"PowerMac2,1",			"iMac FireWire",
+		PMAC_TYPE_FW_IMAC,		core99_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
+	},
+	{	"PowerMac2,2",			"iMac FireWire",
+		PMAC_TYPE_FW_IMAC,		core99_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
+	},
+	{	"PowerMac3,1",			"PowerMac G4 AGP Graphics",
+		PMAC_TYPE_SAWTOOTH,		core99_features,
+		PMAC_MB_OLD_CORE99
+	},
+	{	"PowerMac3,2",			"PowerMac G4 AGP Graphics",
+		PMAC_TYPE_SAWTOOTH,		core99_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
+	},
+	{	"PowerMac3,3",			"PowerMac G4 AGP Graphics",
+		PMAC_TYPE_SAWTOOTH,		core99_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
+	},
+	{	"PowerMac3,4",			"PowerMac G4 Silver",
+		PMAC_TYPE_QUICKSILVER,		core99_features,
+		PMAC_MB_MAY_SLEEP
+	},
+	{	"PowerMac3,5",			"PowerMac G4 Silver",
+		PMAC_TYPE_QUICKSILVER,		core99_features,
+		PMAC_MB_MAY_SLEEP
+	},
+	{	"PowerMac3,6",			"PowerMac G4 Windtunnel",
+		PMAC_TYPE_WINDTUNNEL,		core99_features,
+		PMAC_MB_MAY_SLEEP,
+	},
+	{	"PowerMac4,1",			"iMac \"Flower Power\"",
+		PMAC_TYPE_PANGEA_IMAC,		pangea_features,
+		PMAC_MB_MAY_SLEEP
+	},
+	{	"PowerMac4,2",			"Flat panel iMac",
+		PMAC_TYPE_FLAT_PANEL_IMAC,	pangea_features,
+		PMAC_MB_CAN_SLEEP
+	},
+	{	"PowerMac4,4",			"eMac",
+		PMAC_TYPE_EMAC,			core99_features,
+		PMAC_MB_MAY_SLEEP
+	},
+	{	"PowerMac5,1",			"PowerMac G4 Cube",
+		PMAC_TYPE_CUBE,			core99_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
+	},
+	{	"PowerMac6,1",			"Flat panel iMac",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP,
+	},
+	{	"PowerMac6,3",			"Flat panel iMac",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP,
+	},
+	{	"PowerMac6,4",			"eMac",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP,
+	},
+	{	"PowerMac10,1",			"Mac mini",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER,
+	},
+	{	"iMac,1",			"iMac (first generation)",
+		PMAC_TYPE_ORIG_IMAC,		paddington_features,
+		0
+	},
+
+	/*
+	 * Xserve's
+	 */
+
+	{	"RackMac1,1",			"XServe",
+		PMAC_TYPE_RACKMAC,		rackmac_features,
+		0,
+	},
+	{	"RackMac1,2",			"XServe rev. 2",
+		PMAC_TYPE_RACKMAC,		rackmac_features,
+		0,
+	},
+
+	/*
+	 * Laptops
+	 */
+
+	{	"AAPL,3400/2400",		"PowerBook 3400",
+		PMAC_TYPE_HOOPER,		ohare_features,
+		PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE
+	},
+	{	"AAPL,3500",			"PowerBook 3500",
+		PMAC_TYPE_KANGA,		ohare_features,
+		PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE
+	},
+	{	"AAPL,PowerBook1998",		"PowerBook Wallstreet",
+		PMAC_TYPE_WALLSTREET,		heathrow_laptop_features,
+		PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE
+	},
+	{	"PowerBook1,1",			"PowerBook 101 (Lombard)",
+		PMAC_TYPE_101_PBOOK,		paddington_features,
+		PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE
+	},
+	{	"PowerBook2,1",			"iBook (first generation)",
+		PMAC_TYPE_ORIG_IBOOK,		core99_features,
+		PMAC_MB_CAN_SLEEP | PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE
+	},
+	{	"PowerBook2,2",			"iBook FireWire",
+		PMAC_TYPE_FW_IBOOK,		core99_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER |
+		PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE
+	},
+	{	"PowerBook3,1",			"PowerBook Pismo",
+		PMAC_TYPE_PISMO,		core99_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER |
+		PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE
+	},
+	{	"PowerBook3,2",			"PowerBook Titanium",
+		PMAC_TYPE_TITANIUM,		core99_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
+	},
+	{	"PowerBook3,3",			"PowerBook Titanium II",
+		PMAC_TYPE_TITANIUM2,		core99_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
+	},
+	{	"PowerBook3,4",			"PowerBook Titanium III",
+		PMAC_TYPE_TITANIUM3,		core99_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
+	},
+	{	"PowerBook3,5",			"PowerBook Titanium IV",
+		PMAC_TYPE_TITANIUM4,		core99_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
+	},
+	{	"PowerBook4,1",			"iBook 2",
+		PMAC_TYPE_IBOOK2,		pangea_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
+	},
+	{	"PowerBook4,2",			"iBook 2",
+		PMAC_TYPE_IBOOK2,		pangea_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
+	},
+	{	"PowerBook4,3",			"iBook 2 rev. 2",
+		PMAC_TYPE_IBOOK2,		pangea_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
+	},
+	{	"PowerBook5,1",			"PowerBook G4 17\"",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
+	{	"PowerBook5,2",			"PowerBook G4 15\"",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
+	{	"PowerBook5,3",			"PowerBook G4 17\"",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
+	{	"PowerBook5,4",			"PowerBook G4 15\"",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
+	{	"PowerBook5,5",			"PowerBook G4 17\"",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
+	{	"PowerBook5,6",			"PowerBook G4 15\"",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
+	{	"PowerBook5,7",			"PowerBook G4 17\"",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
+	{	"PowerBook5,8",			"PowerBook G4 15\"",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
+	{	"PowerBook5,9",			"PowerBook G4 17\"",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
+	{	"PowerBook6,1",			"PowerBook G4 12\"",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
+	{	"PowerBook6,2",			"PowerBook G4",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
+	{	"PowerBook6,3",			"iBook G4",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
+	{	"PowerBook6,4",			"PowerBook G4 12\"",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
+	{	"PowerBook6,5",			"iBook G4",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
+	{	"PowerBook6,7",			"iBook G4",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
+	{	"PowerBook6,8",			"PowerBook G4 12\"",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
+#else /* CONFIG_POWER4 */
+	{	"PowerMac7,2",			"PowerMac G5",
+		PMAC_TYPE_POWERMAC_G5,		g5_features,
+		0,
+	},
+#ifdef CONFIG_PPC64
+	{	"PowerMac7,3",			"PowerMac G5",
+		PMAC_TYPE_POWERMAC_G5,		g5_features,
+		0,
+	},
+	{	"PowerMac8,1",			"iMac G5",
+		PMAC_TYPE_IMAC_G5,		g5_features,
+		0,
+	},
+	{	"PowerMac9,1",			"PowerMac G5",
+		PMAC_TYPE_POWERMAC_G5_U3L,	g5_features,
+		0,
+	},
+	{       "RackMac3,1",                   "XServe G5",
+		PMAC_TYPE_XSERVE_G5,		g5_features,
+		0,
+	},
+#endif /* CONFIG_PPC64 */
+#endif /* CONFIG_POWER4 */
+};
+
+/*
+ * The toplevel feature_call callback
+ */
+long pmac_do_feature_call(unsigned int selector, ...)
+{
+	struct device_node *node;
+	long param, value;
+	int i;
+	feature_call func = NULL;
+	va_list args;
+
+	if (pmac_mb.features)
+		for (i=0; pmac_mb.features[i].function; i++)
+			if (pmac_mb.features[i].selector == selector) {
+				func = pmac_mb.features[i].function;
+				break;
+			}
+	if (!func)
+		for (i=0; any_features[i].function; i++)
+			if (any_features[i].selector == selector) {
+				func = any_features[i].function;
+				break;
+			}
+	if (!func)
+		return -ENODEV;
+
+	va_start(args, selector);
+	node = (struct device_node*)va_arg(args, void*);
+	param = va_arg(args, long);
+	value = va_arg(args, long);
+	va_end(args);
+
+	return func(node, param, value);
+}
+
+static int __init probe_motherboard(void)
+{
+	int i;
+	struct macio_chip *macio = &macio_chips[0];
+	const char *model = NULL;
+	struct device_node *dt;
+
+	/* Lookup known motherboard type in device-tree. First try an
+	 * exact match on the "model" property, then try a "compatible"
+	 * match is none is found.
+	 */
+	dt = find_devices("device-tree");
+	if (dt != NULL)
+		model = (const char *) get_property(dt, "model", NULL);
+	for(i=0; model && i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) {
+	    if (strcmp(model, pmac_mb_defs[i].model_string) == 0) {
+		pmac_mb = pmac_mb_defs[i];
+		goto found;
+	    }
+	}
+	for(i=0; i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) {
+	    if (machine_is_compatible(pmac_mb_defs[i].model_string)) {
+		pmac_mb = pmac_mb_defs[i];
+		goto found;
+	    }
+	}
+
+	/* Fallback to selection depending on mac-io chip type */
+	switch(macio->type) {
+#ifndef CONFIG_POWER4
+	    case macio_grand_central:
+		pmac_mb.model_id = PMAC_TYPE_PSURGE;
+		pmac_mb.model_name = "Unknown PowerSurge";
+		break;
+	    case macio_ohare:
+		pmac_mb.model_id = PMAC_TYPE_UNKNOWN_OHARE;
+		pmac_mb.model_name = "Unknown OHare-based";
+		break;
+	    case macio_heathrow:
+		pmac_mb.model_id = PMAC_TYPE_UNKNOWN_HEATHROW;
+		pmac_mb.model_name = "Unknown Heathrow-based";
+		pmac_mb.features = heathrow_desktop_features;
+		break;
+	    case macio_paddington:
+		pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PADDINGTON;
+		pmac_mb.model_name = "Unknown Paddington-based";
+		pmac_mb.features = paddington_features;
+		break;
+	    case macio_keylargo:
+		pmac_mb.model_id = PMAC_TYPE_UNKNOWN_CORE99;
+		pmac_mb.model_name = "Unknown Keylargo-based";
+		pmac_mb.features = core99_features;
+		break;
+	    case macio_pangea:
+		pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PANGEA;
+		pmac_mb.model_name = "Unknown Pangea-based";
+		pmac_mb.features = pangea_features;
+		break;
+	    case macio_intrepid:
+		pmac_mb.model_id = PMAC_TYPE_UNKNOWN_INTREPID;
+		pmac_mb.model_name = "Unknown Intrepid-based";
+		pmac_mb.features = intrepid_features;
+		break;
+#else /* CONFIG_POWER4 */
+	case macio_keylargo2:
+		pmac_mb.model_id = PMAC_TYPE_UNKNOWN_K2;
+		pmac_mb.model_name = "Unknown K2-based";
+		pmac_mb.features = g5_features;
+		break;
+#endif /* CONFIG_POWER4 */
+	default:
+		return -ENODEV;
+	}
+found:
+#ifndef CONFIG_POWER4
+	/* Fixup Hooper vs. Comet */
+	if (pmac_mb.model_id == PMAC_TYPE_HOOPER) {
+		u32 __iomem * mach_id_ptr = ioremap(0xf3000034, 4);
+		if (!mach_id_ptr)
+			return -ENODEV;
+		/* Here, I used to disable the media-bay on comet. It
+		 * appears this is wrong, the floppy connector is actually
+		 * a kind of media-bay and works with the current driver.
+		 */
+		if (__raw_readl(mach_id_ptr) & 0x20000000UL)
+			pmac_mb.model_id = PMAC_TYPE_COMET;
+		iounmap(mach_id_ptr);
+	}
+#endif /* CONFIG_POWER4 */
+
+#ifdef CONFIG_6xx
+	/* Set default value of powersave_nap on machines that support it.
+	 * It appears that uninorth rev 3 has a problem with it, we don't
+	 * enable it on those. In theory, the flush-on-lock property is
+	 * supposed to be set when not supported, but I'm not very confident
+	 * that all Apple OF revs did it properly, I do it the paranoid way.
+	 */
+	while (uninorth_base && uninorth_rev > 3) {
+		struct device_node *np = find_path_device("/cpus");
+		if (!np || !np->child) {
+			printk(KERN_WARNING "Can't find CPU(s) in device tree !\n");
+			break;
+		}
+		np = np->child;
+		/* Nap mode not supported on SMP */
+		if (np->sibling)
+			break;
+		/* Nap mode not supported if flush-on-lock property is present */
+		if (get_property(np, "flush-on-lock", NULL))
+			break;
+		powersave_nap = 1;
+		printk(KERN_INFO "Processor NAP mode on idle enabled.\n");
+		break;
+	}
+
+	/* On CPUs that support it (750FX), lowspeed by default during
+	 * NAP mode
+	 */
+	powersave_lowspeed = 1;
+#endif /* CONFIG_6xx */
+#ifdef CONFIG_POWER4
+	powersave_nap = 1;
+#endif
+	/* Check for "mobile" machine */
+	if (model && (strncmp(model, "PowerBook", 9) == 0
+		   || strncmp(model, "iBook", 5) == 0))
+		pmac_mb.board_flags |= PMAC_MB_MOBILE;
+
+
+	printk(KERN_INFO "PowerMac motherboard: %s\n", pmac_mb.model_name);
+	return 0;
+}
+
+/* Initialize the Core99 UniNorth host bridge and memory controller
+ */
+static void __init probe_uninorth(void)
+{
+	unsigned long actrl;
+
+	/* Locate core99 Uni-N */
+	uninorth_node = of_find_node_by_name(NULL, "uni-n");
+	/* Locate G5 u3 */
+	if (uninorth_node == NULL) {
+		uninorth_node = of_find_node_by_name(NULL, "u3");
+		uninorth_u3 = 1;
+	}
+	if (uninorth_node && uninorth_node->n_addrs > 0) {
+		unsigned long address = uninorth_node->addrs[0].address;
+		uninorth_base = ioremap(address, 0x40000);
+		uninorth_rev = in_be32(UN_REG(UNI_N_VERSION));
+		if (uninorth_u3)
+			u3_ht = ioremap(address + U3_HT_CONFIG_BASE, 0x1000);
+	} else
+		uninorth_node = NULL;
+
+	if (!uninorth_node)
+		return;
+
+	printk(KERN_INFO "Found %s memory controller & host bridge, revision: %d\n",
+	       uninorth_u3 ? "U3" : "UniNorth", uninorth_rev);
+	printk(KERN_INFO "Mapped at 0x%08lx\n", (unsigned long)uninorth_base);
+
+	/* Set the arbitrer QAck delay according to what Apple does
+	 */
+	if (uninorth_rev < 0x11) {
+		actrl = UN_IN(UNI_N_ARB_CTRL) & ~UNI_N_ARB_CTRL_QACK_DELAY_MASK;
+		actrl |= ((uninorth_rev < 3) ? UNI_N_ARB_CTRL_QACK_DELAY105 :
+			UNI_N_ARB_CTRL_QACK_DELAY) << UNI_N_ARB_CTRL_QACK_DELAY_SHIFT;
+		UN_OUT(UNI_N_ARB_CTRL, actrl);
+	}
+
+	/* Some more magic as done by them in recent MacOS X on UniNorth
+	 * revs 1.5 to 2.O and Pangea. Seem to toggle the UniN Maxbus/PCI
+	 * memory timeout
+	 */
+	if ((uninorth_rev >= 0x11 && uninorth_rev <= 0x24) || uninorth_rev == 0xc0)
+		UN_OUT(0x2160, UN_IN(0x2160) & 0x00ffffff);
+}
+
+static void __init probe_one_macio(const char *name, const char *compat, int type)
+{
+	struct device_node*	node;
+	int			i;
+	volatile u32 __iomem *	base;
+	u32*			revp;
+
+	node = find_devices(name);
+	if (!node || !node->n_addrs)
+		return;
+	if (compat)
+		do {
+			if (device_is_compatible(node, compat))
+				break;
+			node = node->next;
+		} while (node);
+	if (!node)
+		return;
+	for(i=0; i<MAX_MACIO_CHIPS; i++) {
+		if (!macio_chips[i].of_node)
+			break;
+		if (macio_chips[i].of_node == node)
+			return;
+	}
+	if (i >= MAX_MACIO_CHIPS) {
+		printk(KERN_ERR "pmac_feature: Please increase MAX_MACIO_CHIPS !\n");
+		printk(KERN_ERR "pmac_feature: %s skipped\n", node->full_name);
+		return;
+	}
+	base = ioremap(node->addrs[0].address, node->addrs[0].size);
+	if (!base) {
+		printk(KERN_ERR "pmac_feature: Can't map mac-io chip !\n");
+		return;
+	}
+	if (type == macio_keylargo) {
+		u32 *did = (u32 *)get_property(node, "device-id", NULL);
+		if (*did == 0x00000025)
+			type = macio_pangea;
+		if (*did == 0x0000003e)
+			type = macio_intrepid;
+	}
+	macio_chips[i].of_node	= node;
+	macio_chips[i].type	= type;
+	macio_chips[i].base	= base;
+	macio_chips[i].flags	= MACIO_FLAG_SCCB_ON | MACIO_FLAG_SCCB_ON;
+	macio_chips[i].name	= macio_names[type];
+	revp = (u32 *)get_property(node, "revision-id", NULL);
+	if (revp)
+		macio_chips[i].rev = *revp;
+	printk(KERN_INFO "Found a %s mac-io controller, rev: %d, mapped at 0x%p\n",
+		macio_names[type], macio_chips[i].rev, macio_chips[i].base);
+}
+
+static int __init
+probe_macios(void)
+{
+	/* Warning, ordering is important */
+	probe_one_macio("gc", NULL, macio_grand_central);
+	probe_one_macio("ohare", NULL, macio_ohare);
+	probe_one_macio("pci106b,7", NULL, macio_ohareII);
+	probe_one_macio("mac-io", "keylargo", macio_keylargo);
+	probe_one_macio("mac-io", "paddington", macio_paddington);
+	probe_one_macio("mac-io", "gatwick", macio_gatwick);
+	probe_one_macio("mac-io", "heathrow", macio_heathrow);
+	probe_one_macio("mac-io", "K2-Keylargo", macio_keylargo2);
+
+	/* Make sure the "main" macio chip appear first */
+	if (macio_chips[0].type == macio_gatwick
+	    && macio_chips[1].type == macio_heathrow) {
+		struct macio_chip temp = macio_chips[0];
+		macio_chips[0] = macio_chips[1];
+		macio_chips[1] = temp;
+	}
+	if (macio_chips[0].type == macio_ohareII
+	    && macio_chips[1].type == macio_ohare) {
+		struct macio_chip temp = macio_chips[0];
+		macio_chips[0] = macio_chips[1];
+		macio_chips[1] = temp;
+	}
+	macio_chips[0].lbus.index = 0;
+	macio_chips[1].lbus.index = 1;
+
+	return (macio_chips[0].of_node == NULL) ? -ENODEV : 0;
+}
+
+static void __init
+initial_serial_shutdown(struct device_node *np)
+{
+	int len;
+	struct slot_names_prop {
+		int	count;
+		char	name[1];
+	} *slots;
+	char *conn;
+	int port_type = PMAC_SCC_ASYNC;
+	int modem = 0;
+
+	slots = (struct slot_names_prop *)get_property(np, "slot-names", &len);
+	conn = get_property(np, "AAPL,connector", &len);
+	if (conn && (strcmp(conn, "infrared") == 0))
+		port_type = PMAC_SCC_IRDA;
+	else if (device_is_compatible(np, "cobalt"))
+		modem = 1;
+	else if (slots && slots->count > 0) {
+		if (strcmp(slots->name, "IrDA") == 0)
+			port_type = PMAC_SCC_IRDA;
+		else if (strcmp(slots->name, "Modem") == 0)
+			modem = 1;
+	}
+	if (modem)
+		pmac_call_feature(PMAC_FTR_MODEM_ENABLE, np, 0, 0);
+	pmac_call_feature(PMAC_FTR_SCC_ENABLE, np, port_type, 0);
+}
+
+static void __init
+set_initial_features(void)
+{
+	struct device_node *np;
+
+	/* That hack appears to be necessary for some StarMax motherboards
+	 * but I'm not too sure it was audited for side-effects on other
+	 * ohare based machines...
+	 * Since I still have difficulties figuring the right way to
+	 * differenciate them all and since that hack was there for a long
+	 * time, I'll keep it around
+	 */
+	if (macio_chips[0].type == macio_ohare && !find_devices("via-pmu")) {
+		struct macio_chip *macio = &macio_chips[0];
+		MACIO_OUT32(OHARE_FCR, STARMAX_FEATURES);
+	} else if (macio_chips[0].type == macio_ohare) {
+		struct macio_chip *macio = &macio_chips[0];
+		MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
+	} else if (macio_chips[1].type == macio_ohare) {
+		struct macio_chip *macio = &macio_chips[1];
+		MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
+	}
+
+#ifdef CONFIG_POWER4
+	if (macio_chips[0].type == macio_keylargo2) {
+#ifndef CONFIG_SMP
+		/* On SMP machines running UP, we have the second CPU eating
+		 * bus cycles. We need to take it off the bus. This is done
+		 * from pmac_smp for SMP kernels running on one CPU
+		 */
+		np = of_find_node_by_type(NULL, "cpu");
+		if (np != NULL)
+			np = of_find_node_by_type(np, "cpu");
+		if (np != NULL) {
+			g5_phy_disable_cpu1();
+			of_node_put(np);
+		}
+#endif /* CONFIG_SMP */
+		/* Enable GMAC for now for PCI probing. It will be disabled
+		 * later on after PCI probe
+		 */
+		np = of_find_node_by_name(NULL, "ethernet");
+		while(np) {
+			if (device_is_compatible(np, "K2-GMAC"))
+				g5_gmac_enable(np, 0, 1);
+			np = of_find_node_by_name(np, "ethernet");
+		}
+
+		/* Enable FW before PCI probe. Will be disabled later on
+		 * Note: We should have a batter way to check that we are
+		 * dealing with uninorth internal cell and not a PCI cell
+		 * on the external PCI. The code below works though.
+		 */
+		np = of_find_node_by_name(NULL, "firewire");
+		while(np) {
+			if (device_is_compatible(np, "pci106b,5811")) {
+				macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED;
+				g5_fw_enable(np, 0, 1);
+			}
+			np = of_find_node_by_name(np, "firewire");
+		}
+	}
+#else /* CONFIG_POWER4 */
+
+	if (macio_chips[0].type == macio_keylargo ||
+	    macio_chips[0].type == macio_pangea ||
+	    macio_chips[0].type == macio_intrepid) {
+		/* Enable GMAC for now for PCI probing. It will be disabled
+		 * later on after PCI probe
+		 */
+		np = of_find_node_by_name(NULL, "ethernet");
+		while(np) {
+			if (np->parent
+			    && device_is_compatible(np->parent, "uni-north")
+			    && device_is_compatible(np, "gmac"))
+				core99_gmac_enable(np, 0, 1);
+			np = of_find_node_by_name(np, "ethernet");
+		}
+
+		/* Enable FW before PCI probe. Will be disabled later on
+		 * Note: We should have a batter way to check that we are
+		 * dealing with uninorth internal cell and not a PCI cell
+		 * on the external PCI. The code below works though.
+		 */
+		np = of_find_node_by_name(NULL, "firewire");
+		while(np) {
+			if (np->parent
+			    && device_is_compatible(np->parent, "uni-north")
+			    && (device_is_compatible(np, "pci106b,18") ||
+			        device_is_compatible(np, "pci106b,30") ||
+			        device_is_compatible(np, "pci11c1,5811"))) {
+				macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED;
+				core99_firewire_enable(np, 0, 1);
+			}
+			np = of_find_node_by_name(np, "firewire");
+		}
+
+		/* Enable ATA-100 before PCI probe. */
+		np = of_find_node_by_name(NULL, "ata-6");
+		while(np) {
+			if (np->parent
+			    && device_is_compatible(np->parent, "uni-north")
+			    && device_is_compatible(np, "kauai-ata")) {
+				core99_ata100_enable(np, 1);
+			}
+			np = of_find_node_by_name(np, "ata-6");
+		}
+
+		/* Switch airport off */
+		np = find_devices("radio");
+		while(np) {
+			if (np && np->parent == macio_chips[0].of_node) {
+				macio_chips[0].flags |= MACIO_FLAG_AIRPORT_ON;
+				core99_airport_enable(np, 0, 0);
+			}
+			np = np->next;
+		}
+	}
+
+	/* On all machines that support sound PM, switch sound off */
+	if (macio_chips[0].of_node)
+		pmac_do_feature_call(PMAC_FTR_SOUND_CHIP_ENABLE,
+			macio_chips[0].of_node, 0, 0);
+
+	/* While on some desktop G3s, we turn it back on */
+	if (macio_chips[0].of_node && macio_chips[0].type == macio_heathrow
+		&& (pmac_mb.model_id == PMAC_TYPE_GOSSAMER ||
+		    pmac_mb.model_id == PMAC_TYPE_SILK)) {
+		struct macio_chip *macio = &macio_chips[0];
+		MACIO_BIS(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
+		MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N);
+	}
+
+	/* Some machine models need the clock chip to be properly setup for
+	 * clock spreading now. This should be a platform function but we
+	 * don't do these at the moment
+	 */
+	pmac_tweak_clock_spreading(1);
+
+#endif /* CONFIG_POWER4 */
+
+	/* On all machines, switch modem & serial ports off */
+	np = find_devices("ch-a");
+	while(np) {
+		initial_serial_shutdown(np);
+		np = np->next;
+	}
+	np = find_devices("ch-b");
+	while(np) {
+		initial_serial_shutdown(np);
+		np = np->next;
+	}
+}
+
+void __init
+pmac_feature_init(void)
+{
+	/* Detect the UniNorth memory controller */
+	probe_uninorth();
+
+	/* Probe mac-io controllers */
+	if (probe_macios()) {
+		printk(KERN_WARNING "No mac-io chip found\n");
+		return;
+	}
+
+	/* Setup low-level i2c stuffs */
+	pmac_init_low_i2c();
+
+	/* Probe machine type */
+	if (probe_motherboard())
+		printk(KERN_WARNING "Unknown PowerMac !\n");
+
+	/* Set some initial features (turn off some chips that will
+	 * be later turned on)
+	 */
+	set_initial_features();
+}
+
+int __init pmac_feature_late_init(void)
+{
+#if 0
+	struct device_node *np;
+
+	/* Request some resources late */
+	if (uninorth_node)
+		request_OF_resource(uninorth_node, 0, NULL);
+	np = find_devices("hammerhead");
+	if (np)
+		request_OF_resource(np, 0, NULL);
+	np = find_devices("interrupt-controller");
+	if (np)
+		request_OF_resource(np, 0, NULL);
+#endif
+	return 0;
+}
+
+device_initcall(pmac_feature_late_init);
+
+#if 0
+static void dump_HT_speeds(char *name, u32 cfg, u32 frq)
+{
+	int	freqs[16] = { 200,300,400,500,600,800,1000,0,0,0,0,0,0,0,0,0 };
+	int	bits[8] = { 8,16,0,32,2,4,0,0 };
+	int	freq = (frq >> 8) & 0xf;
+
+	if (freqs[freq] == 0)
+		printk("%s: Unknown HT link frequency %x\n", name, freq);
+	else
+		printk("%s: %d MHz on main link, (%d in / %d out) bits width\n",
+		       name, freqs[freq],
+		       bits[(cfg >> 28) & 0x7], bits[(cfg >> 24) & 0x7]);
+}
+
+void __init pmac_check_ht_link(void)
+{
+	u32	ufreq, freq, ucfg, cfg;
+	struct device_node *pcix_node;
+	u8	px_bus, px_devfn;
+	struct pci_controller *px_hose;
+
+	(void)in_be32(u3_ht + U3_HT_LINK_COMMAND);
+	ucfg = cfg = in_be32(u3_ht + U3_HT_LINK_CONFIG);
+	ufreq = freq = in_be32(u3_ht + U3_HT_LINK_FREQ);
+	dump_HT_speeds("U3 HyperTransport", cfg, freq);
+
+	pcix_node = of_find_compatible_node(NULL, "pci", "pci-x");
+	if (pcix_node == NULL) {
+		printk("No PCI-X bridge found\n");
+		return;
+	}
+	if (pci_device_from_OF_node(pcix_node, &px_bus, &px_devfn) != 0) {
+		printk("PCI-X bridge found but not matched to pci\n");
+		return;
+	}
+	px_hose = pci_find_hose_for_OF_device(pcix_node);
+	if (px_hose == NULL) {
+		printk("PCI-X bridge found but not matched to host\n");
+		return;
+	}	
+	early_read_config_dword(px_hose, px_bus, px_devfn, 0xc4, &cfg);
+	early_read_config_dword(px_hose, px_bus, px_devfn, 0xcc, &freq);
+	dump_HT_speeds("PCI-X HT Uplink", cfg, freq);
+	early_read_config_dword(px_hose, px_bus, px_devfn, 0xc8, &cfg);
+	early_read_config_dword(px_hose, px_bus, px_devfn, 0xd0, &freq);
+	dump_HT_speeds("PCI-X HT Downlink", cfg, freq);
+}
+#endif /* 0 */
+
+/*
+ * Early video resume hook
+ */
+
+static void (*pmac_early_vresume_proc)(void *data);
+static void *pmac_early_vresume_data;
+
+void pmac_set_early_video_resume(void (*proc)(void *data), void *data)
+{
+	if (_machine != _MACH_Pmac)
+		return;
+	preempt_disable();
+	pmac_early_vresume_proc = proc;
+	pmac_early_vresume_data = data;
+	preempt_enable();
+}
+EXPORT_SYMBOL(pmac_set_early_video_resume);
+
+void pmac_call_early_video_resume(void)
+{
+	if (pmac_early_vresume_proc)
+		pmac_early_vresume_proc(pmac_early_vresume_data);
+}
+
+/*
+ * AGP related suspend/resume code
+ */
+
+static struct pci_dev *pmac_agp_bridge;
+static int (*pmac_agp_suspend)(struct pci_dev *bridge);
+static int (*pmac_agp_resume)(struct pci_dev *bridge);
+
+void pmac_register_agp_pm(struct pci_dev *bridge,
+				 int (*suspend)(struct pci_dev *bridge),
+				 int (*resume)(struct pci_dev *bridge))
+{
+	if (suspend || resume) {
+		pmac_agp_bridge = bridge;
+		pmac_agp_suspend = suspend;
+		pmac_agp_resume = resume;
+		return;
+	}
+	if (bridge != pmac_agp_bridge)
+		return;
+	pmac_agp_suspend = pmac_agp_resume = NULL;
+	return;
+}
+EXPORT_SYMBOL(pmac_register_agp_pm);
+
+void pmac_suspend_agp_for_card(struct pci_dev *dev)
+{
+	if (pmac_agp_bridge == NULL || pmac_agp_suspend == NULL)
+		return;
+	if (pmac_agp_bridge->bus != dev->bus)
+		return;
+	pmac_agp_suspend(pmac_agp_bridge);
+}
+EXPORT_SYMBOL(pmac_suspend_agp_for_card);
+
+void pmac_resume_agp_for_card(struct pci_dev *dev)
+{
+	if (pmac_agp_bridge == NULL || pmac_agp_resume == NULL)
+		return;
+	if (pmac_agp_bridge->bus != dev->bus)
+		return;
+	pmac_agp_resume(pmac_agp_bridge);
+}
+EXPORT_SYMBOL(pmac_resume_agp_for_card);
diff --git a/arch/ppc64/kernel/pmac_low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c
index f3f39e8e337a..f3f39e8e337a 100644
--- a/arch/ppc64/kernel/pmac_low_i2c.c
+++ b/arch/powerpc/platforms/powermac/low_i2c.c
diff --git a/arch/ppc64/kernel/pmac_nvram.c b/arch/powerpc/platforms/powermac/nvram.c
index e32a902236e3..4042e2f06ee0 100644
--- a/arch/ppc64/kernel/pmac_nvram.c
+++ b/arch/powerpc/platforms/powermac/nvram.c
@@ -15,10 +15,13 @@
 #include <linux/kernel.h>
 #include <linux/stddef.h>
 #include <linux/string.h>
+#include <linux/nvram.h>
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/errno.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
 #include <linux/bootmem.h>
 #include <linux/completion.h>
 #include <linux/spinlock.h>
@@ -72,20 +75,38 @@ struct core99_header {
 /*
  * Read and write the non-volatile RAM on PowerMacs and CHRP machines.
  */
+static int nvram_naddrs;
 static volatile unsigned char *nvram_data;
+static int is_core_99;
 static int core99_bank = 0;
+static int nvram_partitions[3];
 // XXX Turn that into a sem
 static DEFINE_SPINLOCK(nv_lock);
 
+extern int pmac_newworld;
 extern int system_running;
 
 static int (*core99_write_bank)(int bank, u8* datas);
 static int (*core99_erase_bank)(int bank);
 
-static char *nvram_image __pmacdata;
+static char *nvram_image;
 
 
-static ssize_t __pmac core99_nvram_read(char *buf, size_t count, loff_t *index)
+static unsigned char core99_nvram_read_byte(int addr)
+{
+	if (nvram_image == NULL)
+		return 0xff;
+	return nvram_image[addr];
+}
+
+static void core99_nvram_write_byte(int addr, unsigned char val)
+{
+	if (nvram_image == NULL)
+		return;
+	nvram_image[addr] = val;
+}
+
+static ssize_t core99_nvram_read(char *buf, size_t count, loff_t *index)
 {
 	int i;
 
@@ -103,7 +124,7 @@ static ssize_t __pmac core99_nvram_read(char *buf, size_t count, loff_t *index)
 	return count;
 }
 
-static ssize_t __pmac core99_nvram_write(char *buf, size_t count, loff_t *index)
+static ssize_t core99_nvram_write(char *buf, size_t count, loff_t *index)
 {
 	int i;
 
@@ -121,14 +142,95 @@ static ssize_t __pmac core99_nvram_write(char *buf, size_t count, loff_t *index)
 	return count;
 }
 
-static ssize_t __pmac core99_nvram_size(void)
+static ssize_t core99_nvram_size(void)
 {
 	if (nvram_image == NULL)
 		return -ENODEV;
 	return NVRAM_SIZE;
 }
 
-static u8 __pmac chrp_checksum(struct chrp_header* hdr)
+#ifdef CONFIG_PPC32
+static volatile unsigned char *nvram_addr;
+static int nvram_mult;
+
+static unsigned char direct_nvram_read_byte(int addr)
+{
+	return in_8(&nvram_data[(addr & (NVRAM_SIZE - 1)) * nvram_mult]);
+}
+
+static void direct_nvram_write_byte(int addr, unsigned char val)
+{
+	out_8(&nvram_data[(addr & (NVRAM_SIZE - 1)) * nvram_mult], val);
+}
+
+
+static unsigned char indirect_nvram_read_byte(int addr)
+{
+	unsigned char val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&nv_lock, flags);
+	out_8(nvram_addr, addr >> 5);
+	val = in_8(&nvram_data[(addr & 0x1f) << 4]);
+	spin_unlock_irqrestore(&nv_lock, flags);
+
+	return val;
+}
+
+static void indirect_nvram_write_byte(int addr, unsigned char val)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&nv_lock, flags);
+	out_8(nvram_addr, addr >> 5);
+	out_8(&nvram_data[(addr & 0x1f) << 4], val);
+	spin_unlock_irqrestore(&nv_lock, flags);
+}
+
+
+#ifdef CONFIG_ADB_PMU
+
+static void pmu_nvram_complete(struct adb_request *req)
+{
+	if (req->arg)
+		complete((struct completion *)req->arg);
+}
+
+static unsigned char pmu_nvram_read_byte(int addr)
+{
+	struct adb_request req;
+	DECLARE_COMPLETION(req_complete); 
+	
+	req.arg = system_state == SYSTEM_RUNNING ? &req_complete : NULL;
+	if (pmu_request(&req, pmu_nvram_complete, 3, PMU_READ_NVRAM,
+			(addr >> 8) & 0xff, addr & 0xff))
+		return 0xff;
+	if (system_state == SYSTEM_RUNNING)
+		wait_for_completion(&req_complete);
+	while (!req.complete)
+		pmu_poll();
+	return req.reply[0];
+}
+
+static void pmu_nvram_write_byte(int addr, unsigned char val)
+{
+	struct adb_request req;
+	DECLARE_COMPLETION(req_complete); 
+	
+	req.arg = system_state == SYSTEM_RUNNING ? &req_complete : NULL;
+	if (pmu_request(&req, pmu_nvram_complete, 4, PMU_WRITE_NVRAM,
+			(addr >> 8) & 0xff, addr & 0xff, val))
+		return;
+	if (system_state == SYSTEM_RUNNING)
+		wait_for_completion(&req_complete);
+	while (!req.complete)
+		pmu_poll();
+}
+
+#endif /* CONFIG_ADB_PMU */
+#endif /* CONFIG_PPC32 */
+
+static u8 chrp_checksum(struct chrp_header* hdr)
 {
 	u8 *ptr;
 	u16 sum = hdr->signature;
@@ -139,7 +241,7 @@ static u8 __pmac chrp_checksum(struct chrp_header* hdr)
 	return sum;
 }
 
-static u32 __pmac core99_calc_adler(u8 *buffer)
+static u32 core99_calc_adler(u8 *buffer)
 {
 	int cnt;
 	u32 low, high;
@@ -161,7 +263,7 @@ static u32 __pmac core99_calc_adler(u8 *buffer)
 	return (high << 16) | low;
 }
 
-static u32 __pmac core99_check(u8* datas)
+static u32 core99_check(u8* datas)
 {
 	struct core99_header* hdr99 = (struct core99_header*)datas;
 
@@ -180,7 +282,7 @@ static u32 __pmac core99_check(u8* datas)
 	return hdr99->generation;
 }
 
-static int __pmac sm_erase_bank(int bank)
+static int sm_erase_bank(int bank)
 {
 	int stat, i;
 	unsigned long timeout;
@@ -194,7 +296,7 @@ static int __pmac sm_erase_bank(int bank)
 	timeout = 0;
 	do {
 		if (++timeout > 1000000) {
-			printk(KERN_ERR "nvram: Sharp/Miron flash erase timeout !\n");
+			printk(KERN_ERR "nvram: Sharp/Micron flash erase timeout !\n");
 			break;
 		}
 		out_8(base, SM_FLASH_CMD_READ_STATUS);
@@ -212,7 +314,7 @@ static int __pmac sm_erase_bank(int bank)
 	return 0;
 }
 
-static int __pmac sm_write_bank(int bank, u8* datas)
+static int sm_write_bank(int bank, u8* datas)
 {
 	int i, stat = 0;
 	unsigned long timeout;
@@ -247,7 +349,7 @@ static int __pmac sm_write_bank(int bank, u8* datas)
 	return 0;
 }
 
-static int __pmac amd_erase_bank(int bank)
+static int amd_erase_bank(int bank)
 {
 	int i, stat = 0;
 	unsigned long timeout;
@@ -294,7 +396,7 @@ static int __pmac amd_erase_bank(int bank)
 	return 0;
 }
 
-static int __pmac amd_write_bank(int bank, u8* datas)
+static int amd_write_bank(int bank, u8* datas)
 {
 	int i, stat = 0;
 	unsigned long timeout;
@@ -340,12 +442,49 @@ static int __pmac amd_write_bank(int bank, u8* datas)
 	return 0;
 }
 
+static void __init lookup_partitions(void)
+{
+	u8 buffer[17];
+	int i, offset;
+	struct chrp_header* hdr;
+
+	if (pmac_newworld) {
+		nvram_partitions[pmac_nvram_OF] = -1;
+		nvram_partitions[pmac_nvram_XPRAM] = -1;
+		nvram_partitions[pmac_nvram_NR] = -1;
+		hdr = (struct chrp_header *)buffer;
+
+		offset = 0;
+		buffer[16] = 0;
+		do {
+			for (i=0;i<16;i++)
+				buffer[i] = ppc_md.nvram_read_val(offset+i);
+			if (!strcmp(hdr->name, "common"))
+				nvram_partitions[pmac_nvram_OF] = offset + 0x10;
+			if (!strcmp(hdr->name, "APL,MacOS75")) {
+				nvram_partitions[pmac_nvram_XPRAM] = offset + 0x10;
+				nvram_partitions[pmac_nvram_NR] = offset + 0x110;
+			}
+			offset += (hdr->len * 0x10);
+		} while(offset < NVRAM_SIZE);
+	} else {
+		nvram_partitions[pmac_nvram_OF] = 0x1800;
+		nvram_partitions[pmac_nvram_XPRAM] = 0x1300;
+		nvram_partitions[pmac_nvram_NR] = 0x1400;
+	}
+	DBG("nvram: OF partition at 0x%x\n", nvram_partitions[pmac_nvram_OF]);
+	DBG("nvram: XP partition at 0x%x\n", nvram_partitions[pmac_nvram_XPRAM]);
+	DBG("nvram: NR partition at 0x%x\n", nvram_partitions[pmac_nvram_NR]);
+}
 
-static int __pmac core99_nvram_sync(void)
+static void core99_nvram_sync(void)
 {
 	struct core99_header* hdr99;
 	unsigned long flags;
 
+	if (!is_core_99 || !nvram_data || !nvram_image)
+		return;
+
 	spin_lock_irqsave(&nv_lock, flags);
 	if (!memcmp(nvram_image, (u8*)nvram_data + core99_bank*NVRAM_SIZE,
 		NVRAM_SIZE))
@@ -370,32 +509,28 @@ static int __pmac core99_nvram_sync(void)
  bail:
 	spin_unlock_irqrestore(&nv_lock, flags);
 
-	return 0;
+#ifdef DEBUG
+       	mdelay(2000);
+#endif
 }
 
-int __init pmac_nvram_init(void)
+static int __init core99_nvram_setup(struct device_node *dp)
 {
-	struct device_node *dp;
-	u32 gen_bank0, gen_bank1;
 	int i;
+	u32 gen_bank0, gen_bank1;
 
-	dp = find_devices("nvram");
-	if (dp == NULL) {
-		printk(KERN_ERR "Can't find NVRAM device\n");
-		return -ENODEV;
-	}
-	if (!device_is_compatible(dp, "nvram,flash")) {
-		printk(KERN_ERR "Incompatible type of NVRAM\n");
-		return -ENXIO;
+	if (nvram_naddrs < 1) {
+		printk(KERN_ERR "nvram: no address\n");
+		return -EINVAL;
 	}
-
 	nvram_image = alloc_bootmem(NVRAM_SIZE);
 	if (nvram_image == NULL) {
 		printk(KERN_ERR "nvram: can't allocate ram image\n");
 		return -ENOMEM;
 	}
 	nvram_data = ioremap(dp->addrs[0].address, NVRAM_SIZE*2);
-	
+	nvram_naddrs = 1; /* Make sure we get the correct case */
+
 	DBG("nvram: Checking bank 0...\n");
 
 	gen_bank0 = core99_check((u8 *)nvram_data);
@@ -408,11 +543,12 @@ int __init pmac_nvram_init(void)
 	for (i=0; i<NVRAM_SIZE; i++)
 		nvram_image[i] = nvram_data[i + core99_bank*NVRAM_SIZE];
 
+	ppc_md.nvram_read_val	= core99_nvram_read_byte;
+	ppc_md.nvram_write_val	= core99_nvram_write_byte;
 	ppc_md.nvram_read	= core99_nvram_read;
 	ppc_md.nvram_write	= core99_nvram_write;
 	ppc_md.nvram_size	= core99_nvram_size;
 	ppc_md.nvram_sync	= core99_nvram_sync;
-	
 	/* 
 	 * Maybe we could be smarter here though making an exclusive list
 	 * of known flash chips is a bit nasty as older OF didn't provide us
@@ -427,67 +563,81 @@ int __init pmac_nvram_init(void)
 		core99_erase_bank = sm_erase_bank;
 		core99_write_bank = sm_write_bank;
 	}
-
 	return 0;
 }
 
-int __pmac pmac_get_partition(int partition)
+int __init pmac_nvram_init(void)
 {
-	struct nvram_partition *part;
-	const char *name;
-	int sig;
-
-	switch(partition) {
-	case pmac_nvram_OF:
-		name = "common";
-		sig = NVRAM_SIG_SYS;
-		break;
-	case pmac_nvram_XPRAM:
-		name = "APL,MacOS75";
-		sig = NVRAM_SIG_OS;
-		break;
-	case pmac_nvram_NR:
-	default:
-		/* Oldworld stuff */
+	struct device_node *dp;
+	int err = 0;
+
+	nvram_naddrs = 0;
+
+	dp = find_devices("nvram");
+	if (dp == NULL) {
+		printk(KERN_ERR "Can't find NVRAM device\n");
 		return -ENODEV;
 	}
+	nvram_naddrs = dp->n_addrs;
+	is_core_99 = device_is_compatible(dp, "nvram,flash");
+	if (is_core_99)
+		err = core99_nvram_setup(dp);
+#ifdef CONFIG_PPC32
+	else if (_machine == _MACH_chrp && nvram_naddrs == 1) {
+		nvram_data = ioremap(dp->addrs[0].address + isa_mem_base,
+				     dp->addrs[0].size);
+		nvram_mult = 1;
+		ppc_md.nvram_read_val	= direct_nvram_read_byte;
+		ppc_md.nvram_write_val	= direct_nvram_write_byte;
+	} else if (nvram_naddrs == 1) {
+		nvram_data = ioremap(dp->addrs[0].address, dp->addrs[0].size);
+		nvram_mult = (dp->addrs[0].size + NVRAM_SIZE - 1) / NVRAM_SIZE;
+		ppc_md.nvram_read_val	= direct_nvram_read_byte;
+		ppc_md.nvram_write_val	= direct_nvram_write_byte;
+	} else if (nvram_naddrs == 2) {
+		nvram_addr = ioremap(dp->addrs[0].address, dp->addrs[0].size);
+		nvram_data = ioremap(dp->addrs[1].address, dp->addrs[1].size);
+		ppc_md.nvram_read_val	= indirect_nvram_read_byte;
+		ppc_md.nvram_write_val	= indirect_nvram_write_byte;
+	} else if (nvram_naddrs == 0 && sys_ctrler == SYS_CTRLER_PMU) {
+#ifdef CONFIG_ADB_PMU
+		nvram_naddrs = -1;
+		ppc_md.nvram_read_val	= pmu_nvram_read_byte;
+		ppc_md.nvram_write_val	= pmu_nvram_write_byte;
+#endif /* CONFIG_ADB_PMU */
+	}
+#endif
+	else {
+		printk(KERN_ERR "Incompatible type of NVRAM\n");
+		return -ENXIO;
+	}
+	lookup_partitions();
+	return err;
+}
 
-	part = nvram_find_partition(sig, name);
-	if (part == NULL)
-		return 0;
-
-	return part->index;
+int pmac_get_partition(int partition)
+{
+	return nvram_partitions[partition];
 }
 
-u8 __pmac pmac_xpram_read(int xpaddr)
+u8 pmac_xpram_read(int xpaddr)
 {
 	int offset = pmac_get_partition(pmac_nvram_XPRAM);
-	loff_t index;
-	u8 buf;
-	ssize_t count;
 
 	if (offset < 0 || xpaddr < 0 || xpaddr > 0x100)
 		return 0xff;
-	index = offset + xpaddr;
 
-	count = ppc_md.nvram_read(&buf, 1, &index);
-	if (count != 1)
-		return 0xff;
-	return buf;
+	return ppc_md.nvram_read_val(xpaddr + offset);
 }
 
-void __pmac pmac_xpram_write(int xpaddr, u8 data)
+void pmac_xpram_write(int xpaddr, u8 data)
 {
 	int offset = pmac_get_partition(pmac_nvram_XPRAM);
-	loff_t index;
-	u8 buf;
 
 	if (offset < 0 || xpaddr < 0 || xpaddr > 0x100)
 		return;
-	index = offset + xpaddr;
-	buf = data;
 
-	ppc_md.nvram_write(&buf, 1, &index);
+	ppc_md.nvram_write_val(xpaddr + offset, data);
 }
 
 EXPORT_SYMBOL(pmac_get_partition);
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
new file mode 100644
index 000000000000..443be526cde7
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -0,0 +1,1169 @@
+/*
+ * Support for PCI bridges found on Power Macintoshes.
+ *
+ * Copyright (C) 2003 Benjamin Herrenschmuidt (benh@kernel.crashing.org)
+ * Copyright (C) 1997 Paul Mackerras (paulus@samba.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/pmac_feature.h>
+#include <asm/grackle.h>
+#ifdef CONFIG_PPC64
+#include <asm/iommu.h>
+#include <asm/ppc-pci.h>
+#endif
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+static int add_bridge(struct device_node *dev);
+
+/* XXX Could be per-controller, but I don't think we risk anything by
+ * assuming we won't have both UniNorth and Bandit */
+static int has_uninorth;
+#ifdef CONFIG_PPC64
+static struct pci_controller *u3_agp;
+static struct pci_controller *u3_ht;
+#endif /* CONFIG_PPC64 */
+
+extern u8 pci_cache_line_size;
+extern int pcibios_assign_bus_offset;
+
+struct device_node *k2_skiplist[2];
+
+/*
+ * Magic constants for enabling cache coherency in the bandit/PSX bridge.
+ */
+#define BANDIT_DEVID_2	8
+#define BANDIT_REVID	3
+
+#define BANDIT_DEVNUM	11
+#define BANDIT_MAGIC	0x50
+#define BANDIT_COHERENT	0x40
+
+static int __init fixup_one_level_bus_range(struct device_node *node, int higher)
+{
+	for (; node != 0;node = node->sibling) {
+		int * bus_range;
+		unsigned int *class_code;
+		int len;
+
+		/* For PCI<->PCI bridges or CardBus bridges, we go down */
+		class_code = (unsigned int *) get_property(node, "class-code", NULL);
+		if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
+			(*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
+			continue;
+		bus_range = (int *) get_property(node, "bus-range", &len);
+		if (bus_range != NULL && len > 2 * sizeof(int)) {
+			if (bus_range[1] > higher)
+				higher = bus_range[1];
+		}
+		higher = fixup_one_level_bus_range(node->child, higher);
+	}
+	return higher;
+}
+
+/* This routine fixes the "bus-range" property of all bridges in the
+ * system since they tend to have their "last" member wrong on macs
+ *
+ * Note that the bus numbers manipulated here are OF bus numbers, they
+ * are not Linux bus numbers.
+ */
+static void __init fixup_bus_range(struct device_node *bridge)
+{
+	int * bus_range;
+	int len;
+
+	/* Lookup the "bus-range" property for the hose */
+	bus_range = (int *) get_property(bridge, "bus-range", &len);
+	if (bus_range == NULL || len < 2 * sizeof(int)) {
+		printk(KERN_WARNING "Can't get bus-range for %s\n",
+			       bridge->full_name);
+		return;
+	}
+	bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]);
+}
+
+/*
+ * Apple MacRISC (U3, UniNorth, Bandit, Chaos) PCI controllers.
+ *
+ * The "Bandit" version is present in all early PCI PowerMacs,
+ * and up to the first ones using Grackle. Some machines may
+ * have 2 bandit controllers (2 PCI busses).
+ *
+ * "Chaos" is used in some "Bandit"-type machines as a bridge
+ * for the separate display bus. It is accessed the same
+ * way as bandit, but cannot be probed for devices. It therefore
+ * has its own config access functions.
+ *
+ * The "UniNorth" version is present in all Core99 machines
+ * (iBook, G4, new IMacs, and all the recent Apple machines).
+ * It contains 3 controllers in one ASIC.
+ *
+ * The U3 is the bridge used on G5 machines. It contains an
+ * AGP bus which is dealt with the old UniNorth access routines
+ * and a HyperTransport bus which uses its own set of access
+ * functions.
+ */
+
+#define MACRISC_CFA0(devfn, off)	\
+	((1 << (unsigned long)PCI_SLOT(dev_fn)) \
+	| (((unsigned long)PCI_FUNC(dev_fn)) << 8) \
+	| (((unsigned long)(off)) & 0xFCUL))
+
+#define MACRISC_CFA1(bus, devfn, off)	\
+	((((unsigned long)(bus)) << 16) \
+	|(((unsigned long)(devfn)) << 8) \
+	|(((unsigned long)(off)) & 0xFCUL) \
+	|1UL)
+
+static unsigned long macrisc_cfg_access(struct pci_controller* hose,
+					       u8 bus, u8 dev_fn, u8 offset)
+{
+	unsigned int caddr;
+
+	if (bus == hose->first_busno) {
+		if (dev_fn < (11 << 3))
+			return 0;
+		caddr = MACRISC_CFA0(dev_fn, offset);
+	} else
+		caddr = MACRISC_CFA1(bus, dev_fn, offset);
+
+	/* Uninorth will return garbage if we don't read back the value ! */
+	do {
+		out_le32(hose->cfg_addr, caddr);
+	} while (in_le32(hose->cfg_addr) != caddr);
+
+	offset &= has_uninorth ? 0x07 : 0x03;
+	return ((unsigned long)hose->cfg_data) + offset;
+}
+
+static int macrisc_read_config(struct pci_bus *bus, unsigned int devfn,
+				      int offset, int len, u32 *val)
+{
+	struct pci_controller *hose;
+	unsigned long addr;
+
+	hose = pci_bus_to_host(bus);
+	if (hose == NULL)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	addr = macrisc_cfg_access(hose, bus->number, devfn, offset);
+	if (!addr)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	/*
+	 * Note: the caller has already checked that offset is
+	 * suitably aligned and that len is 1, 2 or 4.
+	 */
+	switch (len) {
+	case 1:
+		*val = in_8((u8 *)addr);
+		break;
+	case 2:
+		*val = in_le16((u16 *)addr);
+		break;
+	default:
+		*val = in_le32((u32 *)addr);
+		break;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int macrisc_write_config(struct pci_bus *bus, unsigned int devfn,
+				       int offset, int len, u32 val)
+{
+	struct pci_controller *hose;
+	unsigned long addr;
+
+	hose = pci_bus_to_host(bus);
+	if (hose == NULL)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	addr = macrisc_cfg_access(hose, bus->number, devfn, offset);
+	if (!addr)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	/*
+	 * Note: the caller has already checked that offset is
+	 * suitably aligned and that len is 1, 2 or 4.
+	 */
+	switch (len) {
+	case 1:
+		out_8((u8 *)addr, val);
+		(void) in_8((u8 *)addr);
+		break;
+	case 2:
+		out_le16((u16 *)addr, val);
+		(void) in_le16((u16 *)addr);
+		break;
+	default:
+		out_le32((u32 *)addr, val);
+		(void) in_le32((u32 *)addr);
+		break;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops macrisc_pci_ops =
+{
+	macrisc_read_config,
+	macrisc_write_config
+};
+
+#ifdef CONFIG_PPC32
+/*
+ * Verify that a specific (bus, dev_fn) exists on chaos
+ */
+static int
+chaos_validate_dev(struct pci_bus *bus, int devfn, int offset)
+{
+	struct device_node *np;
+	u32 *vendor, *device;
+
+	np = pci_busdev_to_OF_node(bus, devfn);
+	if (np == NULL)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	vendor = (u32 *)get_property(np, "vendor-id", NULL);
+	device = (u32 *)get_property(np, "device-id", NULL);
+	if (vendor == NULL || device == NULL)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	if ((*vendor == 0x106b) && (*device == 3) && (offset >= 0x10)
+	    && (offset != 0x14) && (offset != 0x18) && (offset <= 0x24))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+chaos_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		  int len, u32 *val)
+{
+	int result = chaos_validate_dev(bus, devfn, offset);
+	if (result == PCIBIOS_BAD_REGISTER_NUMBER)
+		*val = ~0U;
+	if (result != PCIBIOS_SUCCESSFUL)
+		return result;
+	return macrisc_read_config(bus, devfn, offset, len, val);
+}
+
+static int
+chaos_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		   int len, u32 val)
+{
+	int result = chaos_validate_dev(bus, devfn, offset);
+	if (result != PCIBIOS_SUCCESSFUL)
+		return result;
+	return macrisc_write_config(bus, devfn, offset, len, val);
+}
+
+static struct pci_ops chaos_pci_ops =
+{
+	chaos_read_config,
+	chaos_write_config
+};
+
+static void __init setup_chaos(struct pci_controller *hose,
+			       struct reg_property *addr)
+{
+	/* assume a `chaos' bridge */
+	hose->ops = &chaos_pci_ops;
+	hose->cfg_addr = ioremap(addr->address + 0x800000, 0x1000);
+	hose->cfg_data = ioremap(addr->address + 0xc00000, 0x1000);
+}
+#else
+#define setup_chaos(hose, addr)
+#endif /* CONFIG_PPC32 */
+
+#ifdef CONFIG_PPC64
+/*
+ * These versions of U3 HyperTransport config space access ops do not
+ * implement self-view of the HT host yet
+ */
+
+/*
+ * This function deals with some "special cases" devices.
+ *
+ *  0 -> No special case
+ *  1 -> Skip the device but act as if the access was successfull
+ *       (return 0xff's on reads, eventually, cache config space
+ *       accesses in a later version)
+ * -1 -> Hide the device (unsuccessful acess)
+ */
+static int u3_ht_skip_device(struct pci_controller *hose,
+			     struct pci_bus *bus, unsigned int devfn)
+{
+	struct device_node *busdn, *dn;
+	int i;
+
+	/* We only allow config cycles to devices that are in OF device-tree
+	 * as we are apparently having some weird things going on with some
+	 * revs of K2 on recent G5s
+	 */
+	if (bus->self)
+		busdn = pci_device_to_OF_node(bus->self);
+	else
+		busdn = hose->arch_data;
+	for (dn = busdn->child; dn; dn = dn->sibling)
+		if (dn->data && PCI_DN(dn)->devfn == devfn)
+			break;
+	if (dn == NULL)
+		return -1;
+
+	/*
+	 * When a device in K2 is powered down, we die on config
+	 * cycle accesses. Fix that here.
+	 */
+	for (i=0; i<2; i++)
+		if (k2_skiplist[i] == dn)
+			return 1;
+
+	return 0;
+}
+
+#define U3_HT_CFA0(devfn, off)		\
+		((((unsigned long)devfn) << 8) | offset)
+#define U3_HT_CFA1(bus, devfn, off)	\
+		(U3_HT_CFA0(devfn, off) \
+		+ (((unsigned long)bus) << 16) \
+		+ 0x01000000UL)
+
+static unsigned long u3_ht_cfg_access(struct pci_controller* hose,
+					     u8 bus, u8 devfn, u8 offset)
+{
+	if (bus == hose->first_busno) {
+		/* For now, we don't self probe U3 HT bridge */
+		if (PCI_SLOT(devfn) == 0)
+			return 0;
+		return ((unsigned long)hose->cfg_data) + U3_HT_CFA0(devfn, offset);
+	} else
+		return ((unsigned long)hose->cfg_data) + U3_HT_CFA1(bus, devfn, offset);
+}
+
+static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn,
+				    int offset, int len, u32 *val)
+{
+	struct pci_controller *hose;
+	unsigned long addr;
+
+	hose = pci_bus_to_host(bus);
+	if (hose == NULL)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
+	if (!addr)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	switch (u3_ht_skip_device(hose, bus, devfn)) {
+	case 0:
+		break;
+	case 1:
+		switch (len) {
+		case 1:
+			*val = 0xff; break;
+		case 2:
+			*val = 0xffff; break;
+		default:
+			*val = 0xfffffffful; break;
+		}
+		return PCIBIOS_SUCCESSFUL;
+	default:
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	/*
+	 * Note: the caller has already checked that offset is
+	 * suitably aligned and that len is 1, 2 or 4.
+	 */
+	switch (len) {
+	case 1:
+		*val = in_8((u8 *)addr);
+		break;
+	case 2:
+		*val = in_le16((u16 *)addr);
+		break;
+	default:
+		*val = in_le32((u32 *)addr);
+		break;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn,
+				     int offset, int len, u32 val)
+{
+	struct pci_controller *hose;
+	unsigned long addr;
+
+	hose = pci_bus_to_host(bus);
+	if (hose == NULL)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
+	if (!addr)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	switch (u3_ht_skip_device(hose, bus, devfn)) {
+	case 0:
+		break;
+	case 1:
+		return PCIBIOS_SUCCESSFUL;
+	default:
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	/*
+	 * Note: the caller has already checked that offset is
+	 * suitably aligned and that len is 1, 2 or 4.
+	 */
+	switch (len) {
+	case 1:
+		out_8((u8 *)addr, val);
+		(void) in_8((u8 *)addr);
+		break;
+	case 2:
+		out_le16((u16 *)addr, val);
+		(void) in_le16((u16 *)addr);
+		break;
+	default:
+		out_le32((u32 *)addr, val);
+		(void) in_le32((u32 *)addr);
+		break;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops u3_ht_pci_ops =
+{
+	u3_ht_read_config,
+	u3_ht_write_config
+};
+#endif /* CONFIG_PPC64 */
+
+#ifdef CONFIG_PPC32
+/*
+ * For a bandit bridge, turn on cache coherency if necessary.
+ * N.B. we could clean this up using the hose ops directly.
+ */
+static void __init init_bandit(struct pci_controller *bp)
+{
+	unsigned int vendev, magic;
+	int rev;
+
+	/* read the word at offset 0 in config space for device 11 */
+	out_le32(bp->cfg_addr, (1UL << BANDIT_DEVNUM) + PCI_VENDOR_ID);
+	udelay(2);
+	vendev = in_le32(bp->cfg_data);
+	if (vendev == (PCI_DEVICE_ID_APPLE_BANDIT << 16) +
+			PCI_VENDOR_ID_APPLE) {
+		/* read the revision id */
+		out_le32(bp->cfg_addr,
+			 (1UL << BANDIT_DEVNUM) + PCI_REVISION_ID);
+		udelay(2);
+		rev = in_8(bp->cfg_data);
+		if (rev != BANDIT_REVID)
+			printk(KERN_WARNING
+			       "Unknown revision %d for bandit\n", rev);
+	} else if (vendev != (BANDIT_DEVID_2 << 16) + PCI_VENDOR_ID_APPLE) {
+		printk(KERN_WARNING "bandit isn't? (%x)\n", vendev);
+		return;
+	}
+
+	/* read the word at offset 0x50 */
+	out_le32(bp->cfg_addr, (1UL << BANDIT_DEVNUM) + BANDIT_MAGIC);
+	udelay(2);
+	magic = in_le32(bp->cfg_data);
+	if ((magic & BANDIT_COHERENT) != 0)
+		return;
+	magic |= BANDIT_COHERENT;
+	udelay(2);
+	out_le32(bp->cfg_data, magic);
+	printk(KERN_INFO "Cache coherency enabled for bandit/PSX\n");
+}
+
+/*
+ * Tweak the PCI-PCI bridge chip on the blue & white G3s.
+ */
+static void __init init_p2pbridge(void)
+{
+	struct device_node *p2pbridge;
+	struct pci_controller* hose;
+	u8 bus, devfn;
+	u16 val;
+
+	/* XXX it would be better here to identify the specific
+	   PCI-PCI bridge chip we have. */
+	if ((p2pbridge = find_devices("pci-bridge")) == 0
+	    || p2pbridge->parent == NULL
+	    || strcmp(p2pbridge->parent->name, "pci") != 0)
+		return;
+	if (pci_device_from_OF_node(p2pbridge, &bus, &devfn) < 0) {
+		DBG("Can't find PCI infos for PCI<->PCI bridge\n");
+		return;
+	}
+	/* Warning: At this point, we have not yet renumbered all busses.
+	 * So we must use OF walking to find out hose
+	 */
+	hose = pci_find_hose_for_OF_device(p2pbridge);
+	if (!hose) {
+		DBG("Can't find hose for PCI<->PCI bridge\n");
+		return;
+	}
+	if (early_read_config_word(hose, bus, devfn,
+				   PCI_BRIDGE_CONTROL, &val) < 0) {
+		printk(KERN_ERR "init_p2pbridge: couldn't read bridge control\n");
+		return;
+	}
+	val &= ~PCI_BRIDGE_CTL_MASTER_ABORT;
+	early_write_config_word(hose, bus, devfn, PCI_BRIDGE_CONTROL, val);
+}
+
+/*
+ * Some Apple desktop machines have a NEC PD720100A USB2 controller
+ * on the motherboard. Open Firmware, on these, will disable the
+ * EHCI part of it so it behaves like a pair of OHCI's. This fixup
+ * code re-enables it ;)
+ */
+static void __init fixup_nec_usb2(void)
+{
+	struct device_node *nec;
+
+	for (nec = NULL; (nec = of_find_node_by_name(nec, "usb")) != NULL;) {
+		struct pci_controller *hose;
+		u32 data, *prop;
+		u8 bus, devfn;
+
+		prop = (u32 *)get_property(nec, "vendor-id", NULL);
+		if (prop == NULL)
+			continue;
+		if (0x1033 != *prop)
+			continue;
+		prop = (u32 *)get_property(nec, "device-id", NULL);
+		if (prop == NULL)
+			continue;
+		if (0x0035 != *prop)
+			continue;
+		prop = (u32 *)get_property(nec, "reg", NULL);
+		if (prop == NULL)
+			continue;
+		devfn = (prop[0] >> 8) & 0xff;
+		bus = (prop[0] >> 16) & 0xff;
+		if (PCI_FUNC(devfn) != 0)
+			continue;
+		hose = pci_find_hose_for_OF_device(nec);
+		if (!hose)
+			continue;
+		early_read_config_dword(hose, bus, devfn, 0xe4, &data);
+		if (data & 1UL) {
+			printk("Found NEC PD720100A USB2 chip with disabled EHCI, fixing up...\n");
+			data &= ~1UL;
+			early_write_config_dword(hose, bus, devfn, 0xe4, data);
+			early_write_config_byte(hose, bus, devfn | 2, PCI_INTERRUPT_LINE,
+				nec->intrs[0].line);
+		}
+	}
+}
+
+static void __init setup_bandit(struct pci_controller *hose,
+				struct reg_property *addr)
+{
+	hose->ops = &macrisc_pci_ops;
+	hose->cfg_addr = ioremap(addr->address + 0x800000, 0x1000);
+	hose->cfg_data = ioremap(addr->address + 0xc00000, 0x1000);
+	init_bandit(hose);
+}
+
+static int __init setup_uninorth(struct pci_controller *hose,
+				 struct reg_property *addr)
+{
+	pci_assign_all_buses = 1;
+	has_uninorth = 1;
+	hose->ops = &macrisc_pci_ops;
+	hose->cfg_addr = ioremap(addr->address + 0x800000, 0x1000);
+	hose->cfg_data = ioremap(addr->address + 0xc00000, 0x1000);
+	/* We "know" that the bridge at f2000000 has the PCI slots. */
+	return addr->address == 0xf2000000;
+}
+#endif
+
+#ifdef CONFIG_PPC64
+static void __init setup_u3_agp(struct pci_controller* hose)
+{
+	/* On G5, we move AGP up to high bus number so we don't need
+	 * to reassign bus numbers for HT. If we ever have P2P bridges
+	 * on AGP, we'll have to move pci_assign_all_busses to the
+	 * pci_controller structure so we enable it for AGP and not for
+	 * HT childs.
+	 * We hard code the address because of the different size of
+	 * the reg address cell, we shall fix that by killing struct
+	 * reg_property and using some accessor functions instead
+	 */
+	hose->first_busno = 0xf0;
+	hose->last_busno = 0xff;
+	has_uninorth = 1;
+	hose->ops = &macrisc_pci_ops;
+	hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000);
+	hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000);
+
+	u3_agp = hose;
+}
+
+static void __init setup_u3_ht(struct pci_controller* hose)
+{
+	struct device_node *np = (struct device_node *)hose->arch_data;
+	int i, cur;
+
+	hose->ops = &u3_ht_pci_ops;
+
+	/* We hard code the address because of the different size of
+	 * the reg address cell, we shall fix that by killing struct
+	 * reg_property and using some accessor functions instead
+	 */
+	hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000,
+							   0x02000000);
+
+	/*
+	 * /ht node doesn't expose a "ranges" property, so we "remove"
+	 * regions that have been allocated to AGP. So far, this version of
+	 * the code doesn't assign any of the 0xfxxxxxxx "fine" memory regions
+	 * to /ht. We need to fix that sooner or later by either parsing all
+	 * child "ranges" properties or figuring out the U3 address space
+	 * decoding logic and then read its configuration register (if any).
+	 */
+	hose->io_base_phys = 0xf4000000;
+	hose->pci_io_size = 0x00400000;
+	hose->io_resource.name = np->full_name;
+	hose->io_resource.start = 0;
+	hose->io_resource.end = 0x003fffff;
+	hose->io_resource.flags = IORESOURCE_IO;
+	hose->pci_mem_offset = 0;
+	hose->first_busno = 0;
+	hose->last_busno = 0xef;
+	hose->mem_resources[0].name = np->full_name;
+	hose->mem_resources[0].start = 0x80000000;
+	hose->mem_resources[0].end = 0xefffffff;
+	hose->mem_resources[0].flags = IORESOURCE_MEM;
+
+	u3_ht = hose;
+
+	if (u3_agp == NULL) {
+		DBG("U3 has no AGP, using full resource range\n");
+		return;
+	}
+
+	/* We "remove" the AGP resources from the resources allocated to HT,
+	 * that is we create "holes". However, that code does assumptions
+	 * that so far happen to be true (cross fingers...), typically that
+	 * resources in the AGP node are properly ordered
+	 */
+	cur = 0;
+	for (i=0; i<3; i++) {
+		struct resource *res = &u3_agp->mem_resources[i];
+		if (res->flags != IORESOURCE_MEM)
+			continue;
+		/* We don't care about "fine" resources */
+		if (res->start >= 0xf0000000)
+			continue;
+		/* Check if it's just a matter of "shrinking" us in one
+		 * direction
+		 */
+		if (hose->mem_resources[cur].start == res->start) {
+			DBG("U3/HT: shrink start of %d, %08lx -> %08lx\n",
+			    cur, hose->mem_resources[cur].start,
+			    res->end + 1);
+			hose->mem_resources[cur].start = res->end + 1;
+			continue;
+		}
+		if (hose->mem_resources[cur].end == res->end) {
+			DBG("U3/HT: shrink end of %d, %08lx -> %08lx\n",
+			    cur, hose->mem_resources[cur].end,
+			    res->start - 1);
+			hose->mem_resources[cur].end = res->start - 1;
+			continue;
+		}
+		/* No, it's not the case, we need a hole */
+		if (cur == 2) {
+			/* not enough resources for a hole, we drop part
+			 * of the range
+			 */
+			printk(KERN_WARNING "Running out of resources"
+			       " for /ht host !\n");
+			hose->mem_resources[cur].end = res->start - 1;
+			continue;
+		}
+		cur++;
+		DBG("U3/HT: hole, %d end at %08lx, %d start at %08lx\n",
+		    cur-1, res->start - 1, cur, res->end + 1);
+		hose->mem_resources[cur].name = np->full_name;
+		hose->mem_resources[cur].flags = IORESOURCE_MEM;
+		hose->mem_resources[cur].start = res->end + 1;
+		hose->mem_resources[cur].end = hose->mem_resources[cur-1].end;
+		hose->mem_resources[cur-1].end = res->start - 1;
+	}
+}
+#endif
+
+/*
+ * We assume that if we have a G3 powermac, we have one bridge called
+ * "pci" (a MPC106) and no bandit or chaos bridges, and contrariwise,
+ * if we have one or more bandit or chaos bridges, we don't have a MPC106.
+ */
+static int __init add_bridge(struct device_node *dev)
+{
+	int len;
+	struct pci_controller *hose;
+#ifdef CONFIG_PPC32
+	struct reg_property *addr;
+#endif
+	char *disp_name;
+	int *bus_range;
+	int primary = 1;
+
+	DBG("Adding PCI host bridge %s\n", dev->full_name);
+
+#ifdef CONFIG_PPC32
+	/* XXX fix this */
+	addr = (struct reg_property *) get_property(dev, "reg", &len);
+	if (addr == NULL || len < sizeof(*addr)) {
+		printk(KERN_WARNING "Can't use %s: no address\n",
+		       dev->full_name);
+		return -ENODEV;
+	}
+#endif
+	bus_range = (int *) get_property(dev, "bus-range", &len);
+	if (bus_range == NULL || len < 2 * sizeof(int)) {
+		printk(KERN_WARNING "Can't get bus-range for %s, assume"
+		       " bus 0\n", dev->full_name);
+	}
+
+	/* XXX Different prototypes, to be merged */
+#ifdef CONFIG_PPC64
+	hose = pcibios_alloc_controller(dev);
+#else
+	hose = pcibios_alloc_controller();
+#endif
+	if (!hose)
+		return -ENOMEM;
+	hose->arch_data = dev;
+	hose->first_busno = bus_range ? bus_range[0] : 0;
+	hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+	disp_name = NULL;
+#ifdef CONFIG_PPC64
+	if (device_is_compatible(dev, "u3-agp")) {
+		setup_u3_agp(hose);
+		disp_name = "U3-AGP";
+		primary = 0;
+	} else if (device_is_compatible(dev, "u3-ht")) {
+		setup_u3_ht(hose);
+		disp_name = "U3-HT";
+		primary = 1;
+	}
+	printk(KERN_INFO "Found %s PCI host bridge.  Firmware bus number: %d->%d\n",
+		disp_name, hose->first_busno, hose->last_busno);
+#else
+	if (device_is_compatible(dev, "uni-north")) {
+		primary = setup_uninorth(hose, addr);
+		disp_name = "UniNorth";
+	} else if (strcmp(dev->name, "pci") == 0) {
+		/* XXX assume this is a mpc106 (grackle) */
+		setup_grackle(hose);
+		disp_name = "Grackle (MPC106)";
+	} else if (strcmp(dev->name, "bandit") == 0) {
+		setup_bandit(hose, addr);
+		disp_name = "Bandit";
+	} else if (strcmp(dev->name, "chaos") == 0) {
+		setup_chaos(hose, addr);
+		disp_name = "Chaos";
+		primary = 0;
+	}
+	printk(KERN_INFO "Found %s PCI host bridge at 0x%08lx. Firmware bus number: %d->%d\n",
+		disp_name, addr->address, hose->first_busno, hose->last_busno);
+#endif
+	DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
+		hose, hose->cfg_addr, hose->cfg_data);
+
+	/* Interpret the "ranges" property */
+	/* This also maps the I/O region and sets isa_io/mem_base */
+	pci_process_bridge_OF_ranges(hose, dev, primary);
+
+	/* Fixup "bus-range" OF property */
+	fixup_bus_range(dev);
+
+	return 0;
+}
+
+static void __init
+pcibios_fixup_OF_interrupts(void)
+{
+	struct pci_dev* dev = NULL;
+
+	/*
+	 * Open Firmware often doesn't initialize the
+	 * PCI_INTERRUPT_LINE config register properly, so we
+	 * should find the device node and apply the interrupt
+	 * obtained from the OF device-tree
+	 */
+	for_each_pci_dev(dev) {
+		struct device_node *node;
+		node = pci_device_to_OF_node(dev);
+		/* this is the node, see if it has interrupts */
+		if (node && node->n_intrs > 0)
+			dev->irq = node->intrs[0].line;
+		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+	}
+}
+
+void __init
+pmac_pcibios_fixup(void)
+{
+	/* Fixup interrupts according to OF tree */
+	pcibios_fixup_OF_interrupts();
+}
+
+#ifdef CONFIG_PPC64
+static void __init pmac_fixup_phb_resources(void)
+{
+	struct pci_controller *hose, *tmp;
+
+	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
+		printk(KERN_INFO "PCI Host %d, io start: %lx; io end: %lx\n",
+		       hose->global_number,
+		       hose->io_resource.start, hose->io_resource.end);
+	}
+}
+#endif
+
+void __init pmac_pci_init(void)
+{
+	struct device_node *np, *root;
+	struct device_node *ht = NULL;
+
+	root = of_find_node_by_path("/");
+	if (root == NULL) {
+		printk(KERN_CRIT "pmac_pci_init: can't find root "
+		       "of device tree\n");
+		return;
+	}
+	for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) {
+		if (np->name == NULL)
+			continue;
+		if (strcmp(np->name, "bandit") == 0
+		    || strcmp(np->name, "chaos") == 0
+		    || strcmp(np->name, "pci") == 0) {
+			if (add_bridge(np) == 0)
+				of_node_get(np);
+		}
+		if (strcmp(np->name, "ht") == 0) {
+			of_node_get(np);
+			ht = np;
+		}
+	}
+	of_node_put(root);
+
+#ifdef CONFIG_PPC64
+	/* Probe HT last as it relies on the agp resources to be already
+	 * setup
+	 */
+	if (ht && add_bridge(ht) != 0)
+		of_node_put(ht);
+
+	/*
+	 * We need to call pci_setup_phb_io for the HT bridge first
+	 * so it gets the I/O port numbers starting at 0, and we
+	 * need to call it for the AGP bridge after that so it gets
+	 * small positive I/O port numbers.
+	 */
+	if (u3_ht)
+		pci_setup_phb_io(u3_ht, 1);
+	if (u3_agp)
+		pci_setup_phb_io(u3_agp, 0);
+
+	/*
+	 * On ppc64, fixup the IO resources on our host bridges as
+	 * the common code does it only for children of the host bridges
+	 */
+	pmac_fixup_phb_resources();
+
+	/* Setup the linkage between OF nodes and PHBs */
+	pci_devs_phb_init();
+
+	/* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
+	 * assume there is no P2P bridge on the AGP bus, which should be a
+	 * safe assumptions hopefully.
+	 */
+	if (u3_agp) {
+		struct device_node *np = u3_agp->arch_data;
+		PCI_DN(np)->busno = 0xf0;
+		for (np = np->child; np; np = np->sibling)
+			PCI_DN(np)->busno = 0xf0;
+	}
+
+	/* pmac_check_ht_link(); */
+
+	/* Tell pci.c to not use the common resource allocation mechanism */
+	pci_probe_only = 1;
+
+	/* Allow all IO */
+	io_page_mask = -1;
+
+#else /* CONFIG_PPC64 */
+	init_p2pbridge();
+	fixup_nec_usb2();
+
+	/* We are still having some issues with the Xserve G4, enabling
+	 * some offset between bus number and domains for now when we
+	 * assign all busses should help for now
+	 */
+	if (pci_assign_all_buses)
+		pcibios_assign_bus_offset = 0x10;
+#endif
+}
+
+int
+pmac_pci_enable_device_hook(struct pci_dev *dev, int initial)
+{
+	struct device_node* node;
+	int updatecfg = 0;
+	int uninorth_child;
+
+	node = pci_device_to_OF_node(dev);
+
+	/* We don't want to enable USB controllers absent from the OF tree
+	 * (iBook second controller)
+	 */
+	if (dev->vendor == PCI_VENDOR_ID_APPLE
+	    && (dev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10))
+	    && !node) {
+		printk(KERN_INFO "Apple USB OHCI %s disabled by firmware\n",
+		       pci_name(dev));
+		return -EINVAL;
+	}
+
+	if (!node)
+		return 0;
+
+	uninorth_child = node->parent &&
+		device_is_compatible(node->parent, "uni-north");
+
+	/* Firewire & GMAC were disabled after PCI probe, the driver is
+	 * claiming them, we must re-enable them now.
+	 */
+	if (uninorth_child && !strcmp(node->name, "firewire") &&
+	    (device_is_compatible(node, "pci106b,18") ||
+	     device_is_compatible(node, "pci106b,30") ||
+	     device_is_compatible(node, "pci11c1,5811"))) {
+		pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, node, 0, 1);
+		pmac_call_feature(PMAC_FTR_1394_ENABLE, node, 0, 1);
+		updatecfg = 1;
+	}
+	if (uninorth_child && !strcmp(node->name, "ethernet") &&
+	    device_is_compatible(node, "gmac")) {
+		pmac_call_feature(PMAC_FTR_GMAC_ENABLE, node, 0, 1);
+		updatecfg = 1;
+	}
+
+	if (updatecfg) {
+		u16 cmd;
+
+		/*
+		 * Make sure PCI is correctly configured
+		 *
+		 * We use old pci_bios versions of the function since, by
+		 * default, gmac is not powered up, and so will be absent
+		 * from the kernel initial PCI lookup.
+		 *
+		 * Should be replaced by 2.4 new PCI mechanisms and really
+		 * register the device.
+		 */
+		pci_read_config_word(dev, PCI_COMMAND, &cmd);
+		cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
+			| PCI_COMMAND_INVALIDATE;
+		pci_write_config_word(dev, PCI_COMMAND, cmd);
+		pci_write_config_byte(dev, PCI_LATENCY_TIMER, 16);
+		pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
+				      L1_CACHE_BYTES >> 2);
+	}
+
+	return 0;
+}
+
+/* We power down some devices after they have been probed. They'll
+ * be powered back on later on
+ */
+void __init pmac_pcibios_after_init(void)
+{
+	struct device_node* nd;
+
+#ifdef CONFIG_BLK_DEV_IDE
+	struct pci_dev *dev = NULL;
+
+	/* OF fails to initialize IDE controllers on macs
+	 * (and maybe other machines)
+	 *
+	 * Ideally, this should be moved to the IDE layer, but we need
+	 * to check specifically with Andre Hedrick how to do it cleanly
+	 * since the common IDE code seem to care about the fact that the
+	 * BIOS may have disabled a controller.
+	 *
+	 * -- BenH
+	 */
+	for_each_pci_dev(dev) {
+		if ((dev->class >> 16) == PCI_BASE_CLASS_STORAGE)
+			pci_enable_device(dev);
+	}
+#endif /* CONFIG_BLK_DEV_IDE */
+
+	nd = find_devices("firewire");
+	while (nd) {
+		if (nd->parent && (device_is_compatible(nd, "pci106b,18") ||
+				   device_is_compatible(nd, "pci106b,30") ||
+				   device_is_compatible(nd, "pci11c1,5811"))
+		    && device_is_compatible(nd->parent, "uni-north")) {
+			pmac_call_feature(PMAC_FTR_1394_ENABLE, nd, 0, 0);
+			pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, nd, 0, 0);
+		}
+		nd = nd->next;
+	}
+	nd = find_devices("ethernet");
+	while (nd) {
+		if (nd->parent && device_is_compatible(nd, "gmac")
+		    && device_is_compatible(nd->parent, "uni-north"))
+			pmac_call_feature(PMAC_FTR_GMAC_ENABLE, nd, 0, 0);
+		nd = nd->next;
+	}
+}
+
+#ifdef CONFIG_PPC32
+void pmac_pci_fixup_cardbus(struct pci_dev* dev)
+{
+	if (_machine != _MACH_Pmac)
+		return;
+	/*
+	 * Fix the interrupt routing on the various cardbus bridges
+	 * used on powerbooks
+	 */
+	if (dev->vendor != PCI_VENDOR_ID_TI)
+		return;
+	if (dev->device == PCI_DEVICE_ID_TI_1130 ||
+	    dev->device == PCI_DEVICE_ID_TI_1131) {
+		u8 val;
+		/* Enable PCI interrupt */
+		if (pci_read_config_byte(dev, 0x91, &val) == 0)
+			pci_write_config_byte(dev, 0x91, val | 0x30);
+		/* Disable ISA interrupt mode */
+		if (pci_read_config_byte(dev, 0x92, &val) == 0)
+			pci_write_config_byte(dev, 0x92, val & ~0x06);
+	}
+	if (dev->device == PCI_DEVICE_ID_TI_1210 ||
+	    dev->device == PCI_DEVICE_ID_TI_1211 ||
+	    dev->device == PCI_DEVICE_ID_TI_1410 ||
+	    dev->device == PCI_DEVICE_ID_TI_1510) {
+		u8 val;
+		/* 0x8c == TI122X_IRQMUX, 2 says to route the INTA
+		   signal out the MFUNC0 pin */
+		if (pci_read_config_byte(dev, 0x8c, &val) == 0)
+			pci_write_config_byte(dev, 0x8c, (val & ~0x0f) | 2);
+		/* Disable ISA interrupt mode */
+		if (pci_read_config_byte(dev, 0x92, &val) == 0)
+			pci_write_config_byte(dev, 0x92, val & ~0x06);
+	}
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_ANY_ID, pmac_pci_fixup_cardbus);
+
+void pmac_pci_fixup_pciata(struct pci_dev* dev)
+{
+       u8 progif = 0;
+
+       /*
+        * On PowerMacs, we try to switch any PCI ATA controller to
+	* fully native mode
+        */
+	if (_machine != _MACH_Pmac)
+		return;
+	/* Some controllers don't have the class IDE */
+	if (dev->vendor == PCI_VENDOR_ID_PROMISE)
+		switch(dev->device) {
+		case PCI_DEVICE_ID_PROMISE_20246:
+		case PCI_DEVICE_ID_PROMISE_20262:
+		case PCI_DEVICE_ID_PROMISE_20263:
+		case PCI_DEVICE_ID_PROMISE_20265:
+		case PCI_DEVICE_ID_PROMISE_20267:
+		case PCI_DEVICE_ID_PROMISE_20268:
+		case PCI_DEVICE_ID_PROMISE_20269:
+		case PCI_DEVICE_ID_PROMISE_20270:
+		case PCI_DEVICE_ID_PROMISE_20271:
+		case PCI_DEVICE_ID_PROMISE_20275:
+		case PCI_DEVICE_ID_PROMISE_20276:
+		case PCI_DEVICE_ID_PROMISE_20277:
+			goto good;
+		}
+	/* Others, check PCI class */
+	if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE)
+		return;
+ good:
+	pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
+	if ((progif & 5) != 5) {
+		printk(KERN_INFO "Forcing PCI IDE into native mode: %s\n", pci_name(dev));
+		(void) pci_write_config_byte(dev, PCI_CLASS_PROG, progif|5);
+		if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) ||
+		    (progif & 5) != 5)
+			printk(KERN_ERR "Rewrite of PROGIF failed !\n");
+	}
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pmac_pci_fixup_pciata);
+#endif
+
+/*
+ * Disable second function on K2-SATA, it's broken
+ * and disable IO BARs on first one
+ */
+static void fixup_k2_sata(struct pci_dev* dev)
+{
+	int i;
+	u16 cmd;
+
+	if (PCI_FUNC(dev->devfn) > 0) {
+		pci_read_config_word(dev, PCI_COMMAND, &cmd);
+		cmd &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY);
+		pci_write_config_word(dev, PCI_COMMAND, cmd);
+		for (i = 0; i < 6; i++) {
+			dev->resource[i].start = dev->resource[i].end = 0;
+			dev->resource[i].flags = 0;
+			pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0);
+		}
+	} else {
+		pci_read_config_word(dev, PCI_COMMAND, &cmd);
+		cmd &= ~PCI_COMMAND_IO;
+		pci_write_config_word(dev, PCI_COMMAND, cmd);
+		for (i = 0; i < 5; i++) {
+			dev->resource[i].start = dev->resource[i].end = 0;
+			dev->resource[i].flags = 0;
+			pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0);
+		}
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, 0x0240, fixup_k2_sata);
+
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
new file mode 100644
index 000000000000..90040c49494d
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -0,0 +1,681 @@
+/*
+ *  Support for the interrupt controllers found on Power Macintosh,
+ *  currently Apple's "Grand Central" interrupt controller in all
+ *  it's incarnations. OpenPIC support used on newer machines is
+ *  in a separate file
+ *
+ *  Copyright (C) 1997 Paul Mackerras (paulus@samba.org)
+ *
+ *  Maintained by Benjamin Herrenschmidt (benh@kernel.crashing.org)
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/sysdev.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+#include <linux/module.h>
+
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/time.h>
+#include <asm/pmac_feature.h>
+#include <asm/mpic.h>
+
+#include "pmac.h"
+
+/*
+ * XXX this should be in xmon.h, but putting it there means xmon.h
+ * has to include <linux/interrupt.h> (to get irqreturn_t), which
+ * causes all sorts of problems.  -- paulus
+ */
+extern irqreturn_t xmon_irq(int, void *, struct pt_regs *);
+
+#ifdef CONFIG_PPC32
+struct pmac_irq_hw {
+        unsigned int    event;
+        unsigned int    enable;
+        unsigned int    ack;
+        unsigned int    level;
+};
+
+/* Default addresses */
+static volatile struct pmac_irq_hw *pmac_irq_hw[4] = {
+        (struct pmac_irq_hw *) 0xf3000020,
+        (struct pmac_irq_hw *) 0xf3000010,
+        (struct pmac_irq_hw *) 0xf4000020,
+        (struct pmac_irq_hw *) 0xf4000010,
+};
+
+#define GC_LEVEL_MASK		0x3ff00000
+#define OHARE_LEVEL_MASK	0x1ff00000
+#define HEATHROW_LEVEL_MASK	0x1ff00000
+
+static int max_irqs;
+static int max_real_irqs;
+static u32 level_mask[4];
+
+static DEFINE_SPINLOCK(pmac_pic_lock);
+
+#define GATWICK_IRQ_POOL_SIZE        10
+static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE];
+
+#define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
+static unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
+
+/*
+ * Mark an irq as "lost".  This is only used on the pmac
+ * since it can lose interrupts (see pmac_set_irq_mask).
+ * -- Cort
+ */
+void
+__set_lost(unsigned long irq_nr, int nokick)
+{
+	if (!test_and_set_bit(irq_nr, ppc_lost_interrupts)) {
+		atomic_inc(&ppc_n_lost_interrupts);
+		if (!nokick)
+			set_dec(1);
+	}
+}
+
+static void
+pmac_mask_and_ack_irq(unsigned int irq_nr)
+{
+        unsigned long bit = 1UL << (irq_nr & 0x1f);
+        int i = irq_nr >> 5;
+        unsigned long flags;
+
+        if ((unsigned)irq_nr >= max_irqs)
+                return;
+
+        clear_bit(irq_nr, ppc_cached_irq_mask);
+        if (test_and_clear_bit(irq_nr, ppc_lost_interrupts))
+                atomic_dec(&ppc_n_lost_interrupts);
+	spin_lock_irqsave(&pmac_pic_lock, flags);
+        out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]);
+        out_le32(&pmac_irq_hw[i]->ack, bit);
+        do {
+                /* make sure ack gets to controller before we enable
+                   interrupts */
+                mb();
+        } while((in_le32(&pmac_irq_hw[i]->enable) & bit)
+                != (ppc_cached_irq_mask[i] & bit));
+	spin_unlock_irqrestore(&pmac_pic_lock, flags);
+}
+
+static void pmac_set_irq_mask(unsigned int irq_nr, int nokicklost)
+{
+        unsigned long bit = 1UL << (irq_nr & 0x1f);
+        int i = irq_nr >> 5;
+        unsigned long flags;
+
+        if ((unsigned)irq_nr >= max_irqs)
+                return;
+
+	spin_lock_irqsave(&pmac_pic_lock, flags);
+        /* enable unmasked interrupts */
+        out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]);
+
+        do {
+                /* make sure mask gets to controller before we
+                   return to user */
+                mb();
+        } while((in_le32(&pmac_irq_hw[i]->enable) & bit)
+                != (ppc_cached_irq_mask[i] & bit));
+
+        /*
+         * Unfortunately, setting the bit in the enable register
+         * when the device interrupt is already on *doesn't* set
+         * the bit in the flag register or request another interrupt.
+         */
+        if (bit & ppc_cached_irq_mask[i] & in_le32(&pmac_irq_hw[i]->level))
+		__set_lost((ulong)irq_nr, nokicklost);
+	spin_unlock_irqrestore(&pmac_pic_lock, flags);
+}
+
+/* When an irq gets requested for the first client, if it's an
+ * edge interrupt, we clear any previous one on the controller
+ */
+static unsigned int pmac_startup_irq(unsigned int irq_nr)
+{
+        unsigned long bit = 1UL << (irq_nr & 0x1f);
+        int i = irq_nr >> 5;
+
+	if ((irq_desc[irq_nr].status & IRQ_LEVEL) == 0)
+		out_le32(&pmac_irq_hw[i]->ack, bit);
+        set_bit(irq_nr, ppc_cached_irq_mask);
+        pmac_set_irq_mask(irq_nr, 0);
+
+	return 0;
+}
+
+static void pmac_mask_irq(unsigned int irq_nr)
+{
+        clear_bit(irq_nr, ppc_cached_irq_mask);
+        pmac_set_irq_mask(irq_nr, 0);
+        mb();
+}
+
+static void pmac_unmask_irq(unsigned int irq_nr)
+{
+        set_bit(irq_nr, ppc_cached_irq_mask);
+        pmac_set_irq_mask(irq_nr, 0);
+}
+
+static void pmac_end_irq(unsigned int irq_nr)
+{
+	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
+	    && irq_desc[irq_nr].action) {
+        	set_bit(irq_nr, ppc_cached_irq_mask);
+	        pmac_set_irq_mask(irq_nr, 1);
+	}
+}
+
+
+struct hw_interrupt_type pmac_pic = {
+	.typename	= " PMAC-PIC ",
+	.startup	= pmac_startup_irq,
+	.enable		= pmac_unmask_irq,
+	.disable	= pmac_mask_irq,
+	.ack		= pmac_mask_and_ack_irq,
+	.end		= pmac_end_irq,
+};
+
+struct hw_interrupt_type gatwick_pic = {
+	.typename	= " GATWICK  ",
+	.startup	= pmac_startup_irq,
+	.enable		= pmac_unmask_irq,
+	.disable	= pmac_mask_irq,
+	.ack		= pmac_mask_and_ack_irq,
+	.end		= pmac_end_irq,
+};
+
+static irqreturn_t gatwick_action(int cpl, void *dev_id, struct pt_regs *regs)
+{
+	int irq, bits;
+
+	for (irq = max_irqs; (irq -= 32) >= max_real_irqs; ) {
+		int i = irq >> 5;
+		bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i];
+		/* We must read level interrupts from the level register */
+		bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]);
+		bits &= ppc_cached_irq_mask[i];
+		if (bits == 0)
+			continue;
+		irq += __ilog2(bits);
+		__do_IRQ(irq, regs);
+		return IRQ_HANDLED;
+	}
+	printk("gatwick irq not from gatwick pic\n");
+	return IRQ_NONE;
+}
+
+int
+pmac_get_irq(struct pt_regs *regs)
+{
+	int irq;
+	unsigned long bits = 0;
+
+#ifdef CONFIG_SMP
+	void psurge_smp_message_recv(struct pt_regs *);
+
+       	/* IPI's are a hack on the powersurge -- Cort */
+       	if ( smp_processor_id() != 0 ) {
+		psurge_smp_message_recv(regs);
+		return -2;	/* ignore, already handled */
+        }
+#endif /* CONFIG_SMP */
+	for (irq = max_real_irqs; (irq -= 32) >= 0; ) {
+		int i = irq >> 5;
+		bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i];
+		/* We must read level interrupts from the level register */
+		bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]);
+		bits &= ppc_cached_irq_mask[i];
+		if (bits == 0)
+			continue;
+		irq += __ilog2(bits);
+		break;
+	}
+
+	return irq;
+}
+
+/* This routine will fix some missing interrupt values in the device tree
+ * on the gatwick mac-io controller used by some PowerBooks
+ */
+static void __init
+pmac_fix_gatwick_interrupts(struct device_node *gw, int irq_base)
+{
+	struct device_node *node;
+	int count;
+
+	memset(gatwick_int_pool, 0, sizeof(gatwick_int_pool));
+	node = gw->child;
+	count = 0;
+	while(node)
+	{
+		/* Fix SCC */
+		if (strcasecmp(node->name, "escc") == 0)
+			if (node->child) {
+				if (node->child->n_intrs < 3) {
+					node->child->intrs = &gatwick_int_pool[count];
+					count += 3;
+				}
+				node->child->n_intrs = 3;
+				node->child->intrs[0].line = 15+irq_base;
+				node->child->intrs[1].line =  4+irq_base;
+				node->child->intrs[2].line =  5+irq_base;
+				printk(KERN_INFO "irq: fixed SCC on second controller (%d,%d,%d)\n",
+					node->child->intrs[0].line,
+					node->child->intrs[1].line,
+					node->child->intrs[2].line);
+			}
+		/* Fix media-bay & left SWIM */
+		if (strcasecmp(node->name, "media-bay") == 0) {
+			struct device_node* ya_node;
+
+			if (node->n_intrs == 0)
+				node->intrs = &gatwick_int_pool[count++];
+			node->n_intrs = 1;
+			node->intrs[0].line = 29+irq_base;
+			printk(KERN_INFO "irq: fixed media-bay on second controller (%d)\n",
+					node->intrs[0].line);
+
+			ya_node = node->child;
+			while(ya_node)
+			{
+				if (strcasecmp(ya_node->name, "floppy") == 0) {
+					if (ya_node->n_intrs < 2) {
+						ya_node->intrs = &gatwick_int_pool[count];
+						count += 2;
+					}
+					ya_node->n_intrs = 2;
+					ya_node->intrs[0].line = 19+irq_base;
+					ya_node->intrs[1].line =  1+irq_base;
+					printk(KERN_INFO "irq: fixed floppy on second controller (%d,%d)\n",
+						ya_node->intrs[0].line, ya_node->intrs[1].line);
+				}
+				if (strcasecmp(ya_node->name, "ata4") == 0) {
+					if (ya_node->n_intrs < 2) {
+						ya_node->intrs = &gatwick_int_pool[count];
+						count += 2;
+					}
+					ya_node->n_intrs = 2;
+					ya_node->intrs[0].line = 14+irq_base;
+					ya_node->intrs[1].line =  3+irq_base;
+					printk(KERN_INFO "irq: fixed ide on second controller (%d,%d)\n",
+						ya_node->intrs[0].line, ya_node->intrs[1].line);
+				}
+				ya_node = ya_node->sibling;
+			}
+		}
+		node = node->sibling;
+	}
+	if (count > 10) {
+		printk("WARNING !! Gatwick interrupt pool overflow\n");
+		printk("  GATWICK_IRQ_POOL_SIZE = %d\n", GATWICK_IRQ_POOL_SIZE);
+		printk("              requested = %d\n", count);
+	}
+}
+
+/*
+ * The PowerBook 3400/2400/3500 can have a combo ethernet/modem
+ * card which includes an ohare chip that acts as a second interrupt
+ * controller.  If we find this second ohare, set it up and fix the
+ * interrupt value in the device tree for the ethernet chip.
+ */
+static int __init enable_second_ohare(void)
+{
+	unsigned char bus, devfn;
+	unsigned short cmd;
+        unsigned long addr;
+	struct device_node *irqctrler = find_devices("pci106b,7");
+	struct device_node *ether;
+
+	if (irqctrler == NULL || irqctrler->n_addrs <= 0)
+		return -1;
+	addr = (unsigned long) ioremap(irqctrler->addrs[0].address, 0x40);
+	pmac_irq_hw[1] = (volatile struct pmac_irq_hw *)(addr + 0x20);
+	max_irqs = 64;
+	if (pci_device_from_OF_node(irqctrler, &bus, &devfn) == 0) {
+		struct pci_controller* hose = pci_find_hose_for_OF_device(irqctrler);
+		if (!hose)
+		    printk(KERN_ERR "Can't find PCI hose for OHare2 !\n");
+		else {
+		    early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd);
+		    cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
+	  	    cmd &= ~PCI_COMMAND_IO;
+		    early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd);
+		}
+	}
+
+	/* Fix interrupt for the modem/ethernet combo controller. The number
+	   in the device tree (27) is bogus (correct for the ethernet-only
+	   board but not the combo ethernet/modem board).
+	   The real interrupt is 28 on the second controller -> 28+32 = 60.
+	*/
+	ether = find_devices("pci1011,14");
+	if (ether && ether->n_intrs > 0) {
+		ether->intrs[0].line = 60;
+		printk(KERN_INFO "irq: Fixed ethernet IRQ to %d\n",
+		       ether->intrs[0].line);
+	}
+
+	/* Return the interrupt number of the cascade */
+	return irqctrler->intrs[0].line;
+}
+
+#ifdef CONFIG_XMON
+static struct irqaction xmon_action = {
+	.handler	= xmon_irq,
+	.flags		= 0,
+	.mask		= CPU_MASK_NONE,
+	.name		= "NMI - XMON"
+};
+#endif
+
+static struct irqaction gatwick_cascade_action = {
+	.handler	= gatwick_action,
+	.flags		= SA_INTERRUPT,
+	.mask		= CPU_MASK_NONE,
+	.name		= "cascade",
+};
+#endif /* CONFIG_PPC32 */
+
+static int pmac_u3_cascade(struct pt_regs *regs, void *data)
+{
+	return mpic_get_one_irq((struct mpic *)data, regs);
+}
+
+void __init pmac_pic_init(void)
+{
+        struct device_node *irqctrler  = NULL;
+        struct device_node *irqctrler2 = NULL;
+	struct device_node *np;
+#ifdef CONFIG_PPC32
+        int i;
+        unsigned long addr;
+	int irq_cascade = -1;
+#endif
+	struct mpic *mpic1, *mpic2;
+
+	/* We first try to detect Apple's new Core99 chipset, since mac-io
+	 * is quite different on those machines and contains an IBM MPIC2.
+	 */
+	np = find_type_devices("open-pic");
+	while (np) {
+		if (np->parent && !strcmp(np->parent->name, "u3"))
+			irqctrler2 = np;
+		else
+			irqctrler = np;
+		np = np->next;
+	}
+	if (irqctrler != NULL && irqctrler->n_addrs > 0) {
+		unsigned char senses[128];
+
+		printk(KERN_INFO "PowerMac using OpenPIC irq controller at 0x%08x\n",
+		       (unsigned int)irqctrler->addrs[0].address);
+		pmac_call_feature(PMAC_FTR_ENABLE_MPIC, irqctrler, 0, 0);
+
+		prom_get_irq_senses(senses, 0, 128);
+		mpic1 = mpic_alloc(irqctrler->addrs[0].address,
+				   MPIC_PRIMARY | MPIC_WANTS_RESET,
+				   0, 0, 128, 252, senses, 128, " OpenPIC  ");
+		BUG_ON(mpic1 == NULL);
+		mpic_init(mpic1);		
+
+		if (irqctrler2 != NULL && irqctrler2->n_intrs > 0 &&
+		    irqctrler2->n_addrs > 0) {
+			printk(KERN_INFO "Slave OpenPIC at 0x%08x hooked on IRQ %d\n",
+			       (u32)irqctrler2->addrs[0].address,
+			       irqctrler2->intrs[0].line);
+
+			pmac_call_feature(PMAC_FTR_ENABLE_MPIC, irqctrler2, 0, 0);
+			prom_get_irq_senses(senses, 128, 128 + 124);
+
+			/* We don't need to set MPIC_BROKEN_U3 here since we don't have
+			 * hypertransport interrupts routed to it
+			 */
+			mpic2 = mpic_alloc(irqctrler2->addrs[0].address,
+					   MPIC_BIG_ENDIAN | MPIC_WANTS_RESET,
+					   0, 128, 124, 0, senses, 124,
+					   " U3-MPIC  ");
+			BUG_ON(mpic2 == NULL);
+			mpic_init(mpic2);
+			mpic_setup_cascade(irqctrler2->intrs[0].line,
+					   pmac_u3_cascade, mpic2);
+		}
+#if defined(CONFIG_XMON) && defined(CONFIG_PPC32)
+		{
+			struct device_node* pswitch;
+			int nmi_irq;
+
+			pswitch = find_devices("programmer-switch");
+			if (pswitch && pswitch->n_intrs) {
+				nmi_irq = pswitch->intrs[0].line;
+				mpic_irq_set_priority(nmi_irq, 9);
+				setup_irq(nmi_irq, &xmon_action);
+			}
+		}
+#endif	/* CONFIG_XMON */
+		return;
+	}
+	irqctrler = NULL;
+
+#ifdef CONFIG_PPC32
+	/* Get the level/edge settings, assume if it's not
+	 * a Grand Central nor an OHare, then it's an Heathrow
+	 * (or Paddington).
+	 */
+	ppc_md.get_irq = pmac_get_irq;
+	if (find_devices("gc"))
+		level_mask[0] = GC_LEVEL_MASK;
+	else if (find_devices("ohare")) {
+		level_mask[0] = OHARE_LEVEL_MASK;
+		/* We might have a second cascaded ohare */
+		level_mask[1] = OHARE_LEVEL_MASK;
+	} else {
+		level_mask[0] = HEATHROW_LEVEL_MASK;
+		level_mask[1] = 0;
+		/* We might have a second cascaded heathrow */
+		level_mask[2] = HEATHROW_LEVEL_MASK;
+		level_mask[3] = 0;
+	}
+
+	/*
+	 * G3 powermacs and 1999 G3 PowerBooks have 64 interrupts,
+	 * 1998 G3 Series PowerBooks have 128,
+	 * other powermacs have 32.
+	 * The combo ethernet/modem card for the Powerstar powerbooks
+	 * (2400/3400/3500, ohare based) has a second ohare chip
+	 * effectively making a total of 64.
+	 */
+	max_irqs = max_real_irqs = 32;
+	irqctrler = find_devices("mac-io");
+	if (irqctrler)
+	{
+		max_real_irqs = 64;
+		if (irqctrler->next)
+			max_irqs = 128;
+		else
+			max_irqs = 64;
+	}
+	for ( i = 0; i < max_real_irqs ; i++ )
+		irq_desc[i].handler = &pmac_pic;
+
+	/* get addresses of first controller */
+	if (irqctrler) {
+		if  (irqctrler->n_addrs > 0) {
+			addr = (unsigned long)
+				ioremap(irqctrler->addrs[0].address, 0x40);
+			for (i = 0; i < 2; ++i)
+				pmac_irq_hw[i] = (volatile struct pmac_irq_hw*)
+					(addr + (2 - i) * 0x10);
+		}
+
+		/* get addresses of second controller */
+		irqctrler = irqctrler->next;
+		if (irqctrler && irqctrler->n_addrs > 0) {
+			addr = (unsigned long)
+				ioremap(irqctrler->addrs[0].address, 0x40);
+			for (i = 2; i < 4; ++i)
+				pmac_irq_hw[i] = (volatile struct pmac_irq_hw*)
+					(addr + (4 - i) * 0x10);
+			irq_cascade = irqctrler->intrs[0].line;
+			if (device_is_compatible(irqctrler, "gatwick"))
+				pmac_fix_gatwick_interrupts(irqctrler, max_real_irqs);
+		}
+	} else {
+		/* older powermacs have a GC (grand central) or ohare at
+		   f3000000, with interrupt control registers at f3000020. */
+		addr = (unsigned long) ioremap(0xf3000000, 0x40);
+		pmac_irq_hw[0] = (volatile struct pmac_irq_hw *) (addr + 0x20);
+	}
+
+	/* PowerBooks 3400 and 3500 can have a second controller in a second
+	   ohare chip, on the combo ethernet/modem card */
+	if (machine_is_compatible("AAPL,3400/2400")
+	     || machine_is_compatible("AAPL,3500"))
+		irq_cascade = enable_second_ohare();
+
+	/* disable all interrupts in all controllers */
+	for (i = 0; i * 32 < max_irqs; ++i)
+		out_le32(&pmac_irq_hw[i]->enable, 0);
+	/* mark level interrupts */
+	for (i = 0; i < max_irqs; i++)
+		if (level_mask[i >> 5] & (1UL << (i & 0x1f)))
+			irq_desc[i].status = IRQ_LEVEL;
+
+	/* get interrupt line of secondary interrupt controller */
+	if (irq_cascade >= 0) {
+		printk(KERN_INFO "irq: secondary controller on irq %d\n",
+			(int)irq_cascade);
+		for ( i = max_real_irqs ; i < max_irqs ; i++ )
+			irq_desc[i].handler = &gatwick_pic;
+		setup_irq(irq_cascade, &gatwick_cascade_action);
+	}
+	printk("System has %d possible interrupts\n", max_irqs);
+	if (max_irqs != max_real_irqs)
+		printk(KERN_DEBUG "%d interrupts on main controller\n",
+			max_real_irqs);
+
+#ifdef CONFIG_XMON
+	setup_irq(20, &xmon_action);
+#endif	/* CONFIG_XMON */
+#endif	/* CONFIG_PPC32 */
+}
+
+#if defined(CONFIG_PM) && defined(CONFIG_PPC32)
+/*
+ * These procedures are used in implementing sleep on the powerbooks.
+ * sleep_save_intrs() saves the states of all interrupt enables
+ * and disables all interrupts except for the nominated one.
+ * sleep_restore_intrs() restores the states of all interrupt enables.
+ */
+unsigned long sleep_save_mask[2];
+
+/* This used to be passed by the PMU driver but that link got
+ * broken with the new driver model. We use this tweak for now...
+ */
+static int pmacpic_find_viaint(void)
+{
+	int viaint = -1;
+
+#ifdef CONFIG_ADB_PMU
+	struct device_node *np;
+
+	if (pmu_get_model() != PMU_OHARE_BASED)
+		goto not_found;
+	np = of_find_node_by_name(NULL, "via-pmu");
+	if (np == NULL)
+		goto not_found;
+	viaint = np->intrs[0].line;
+#endif /* CONFIG_ADB_PMU */
+
+not_found:
+	return viaint;
+}
+
+static int pmacpic_suspend(struct sys_device *sysdev, pm_message_t state)
+{
+	int viaint = pmacpic_find_viaint();
+
+	sleep_save_mask[0] = ppc_cached_irq_mask[0];
+	sleep_save_mask[1] = ppc_cached_irq_mask[1];
+	ppc_cached_irq_mask[0] = 0;
+	ppc_cached_irq_mask[1] = 0;
+	if (viaint > 0)
+		set_bit(viaint, ppc_cached_irq_mask);
+	out_le32(&pmac_irq_hw[0]->enable, ppc_cached_irq_mask[0]);
+	if (max_real_irqs > 32)
+		out_le32(&pmac_irq_hw[1]->enable, ppc_cached_irq_mask[1]);
+	(void)in_le32(&pmac_irq_hw[0]->event);
+	/* make sure mask gets to controller before we return to caller */
+	mb();
+        (void)in_le32(&pmac_irq_hw[0]->enable);
+
+        return 0;
+}
+
+static int pmacpic_resume(struct sys_device *sysdev)
+{
+	int i;
+
+	out_le32(&pmac_irq_hw[0]->enable, 0);
+	if (max_real_irqs > 32)
+		out_le32(&pmac_irq_hw[1]->enable, 0);
+	mb();
+	for (i = 0; i < max_real_irqs; ++i)
+		if (test_bit(i, sleep_save_mask))
+			pmac_unmask_irq(i);
+
+	return 0;
+}
+
+#endif /* CONFIG_PM && CONFIG_PPC32 */
+
+static struct sysdev_class pmacpic_sysclass = {
+	set_kset_name("pmac_pic"),
+};
+
+static struct sys_device device_pmacpic = {
+	.id		= 0,
+	.cls		= &pmacpic_sysclass,
+};
+
+static struct sysdev_driver driver_pmacpic = {
+#if defined(CONFIG_PM) && defined(CONFIG_PPC32)
+	.suspend	= &pmacpic_suspend,
+	.resume		= &pmacpic_resume,
+#endif /* CONFIG_PM && CONFIG_PPC32 */
+};
+
+static int __init init_pmacpic_sysfs(void)
+{
+#ifdef CONFIG_PPC32
+	if (max_irqs == 0)
+		return -ENODEV;
+#endif
+	printk(KERN_DEBUG "Registering pmac pic with sysfs...\n");
+	sysdev_class_register(&pmacpic_sysclass);
+	sysdev_register(&device_pmacpic);
+	sysdev_driver_register(&pmacpic_sysclass, &driver_pmacpic);
+	return 0;
+}
+
+subsys_initcall(init_pmacpic_sysfs);
+
diff --git a/arch/powerpc/platforms/powermac/pic.h b/arch/powerpc/platforms/powermac/pic.h
new file mode 100644
index 000000000000..664103dfeef9
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/pic.h
@@ -0,0 +1,11 @@
+#ifndef __PPC_PLATFORMS_PMAC_PIC_H
+#define __PPC_PLATFORMS_PMAC_PIC_H
+
+#include <linux/irq.h>
+
+extern struct hw_interrupt_type pmac_pic;
+
+void pmac_pic_init(void);
+int pmac_get_irq(struct pt_regs *regs);
+
+#endif /* __PPC_PLATFORMS_PMAC_PIC_H */
diff --git a/arch/powerpc/platforms/powermac/pmac.h b/arch/powerpc/platforms/powermac/pmac.h
new file mode 100644
index 000000000000..2ad25e13423e
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/pmac.h
@@ -0,0 +1,51 @@
+#ifndef __PMAC_H__
+#define __PMAC_H__
+
+#include <linux/pci.h>
+#include <linux/ide.h>
+#include <linux/irq.h>
+
+/*
+ * Declaration for the various functions exported by the
+ * pmac_* files. Mostly for use by pmac_setup
+ */
+
+struct rtc_time;
+
+extern long pmac_time_init(void);
+extern unsigned long pmac_get_boot_time(void);
+extern void pmac_get_rtc_time(struct rtc_time *);
+extern int pmac_set_rtc_time(struct rtc_time *);
+extern void pmac_read_rtc_time(void);
+extern void pmac_calibrate_decr(void);
+extern void pmac_pcibios_fixup(void);
+extern void pmac_pci_init(void);
+extern unsigned long pmac_ide_get_base(int index);
+extern void pmac_ide_init_hwif_ports(hw_regs_t *hw,
+	unsigned long data_port, unsigned long ctrl_port, int *irq);
+
+extern void pmac_nvram_update(void);
+extern unsigned char pmac_nvram_read_byte(int addr);
+extern void pmac_nvram_write_byte(int addr, unsigned char val);
+extern int pmac_pci_enable_device_hook(struct pci_dev *dev, int initial);
+extern void pmac_pcibios_after_init(void);
+extern int of_show_percpuinfo(struct seq_file *m, int i);
+
+extern void pmac_pci_init(void);
+extern void pmac_setup_pci_dma(void);
+extern void pmac_check_ht_link(void);
+
+extern void pmac_setup_smp(void);
+
+extern unsigned long pmac_ide_get_base(int index);
+extern void pmac_ide_init_hwif_ports(hw_regs_t *hw,
+	unsigned long data_port, unsigned long ctrl_port, int *irq);
+
+extern int pmac_nvram_init(void);
+
+extern struct hw_interrupt_type pmac_pic;
+
+void pmac_pic_init(void);
+int pmac_get_irq(struct pt_regs *regs);
+
+#endif /* __PMAC_H__ */
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
new file mode 100644
index 000000000000..7acb0546671f
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -0,0 +1,782 @@
+/*
+ *  Powermac setup and early boot code plus other random bits.
+ *
+ *  PowerPC version
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Adapted for Power Macintosh by Paul Mackerras
+ *    Copyright (C) 1996 Paul Mackerras (paulus@samba.org)
+ *
+ *  Derived from "arch/alpha/kernel/setup.c"
+ *    Copyright (C) 1995 Linus Torvalds
+ *
+ *  Maintained by Benjamin Herrenschmidt (benh@kernel.crashing.org)
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+/*
+ * bootup setup stuff..
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/a.out.h>
+#include <linux/tty.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/major.h>
+#include <linux/initrd.h>
+#include <linux/vt_kern.h>
+#include <linux/console.h>
+#include <linux/ide.h>
+#include <linux/pci.h>
+#include <linux/adb.h>
+#include <linux/cuda.h>
+#include <linux/pmu.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/bitops.h>
+#include <linux/suspend.h>
+
+#include <asm/reg.h>
+#include <asm/sections.h>
+#include <asm/prom.h>
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/io.h>
+#include <asm/pci-bridge.h>
+#include <asm/ohare.h>
+#include <asm/mediabay.h>
+#include <asm/machdep.h>
+#include <asm/dma.h>
+#include <asm/cputable.h>
+#include <asm/btext.h>
+#include <asm/pmac_feature.h>
+#include <asm/time.h>
+#include <asm/of_device.h>
+#include <asm/mmu_context.h>
+#include <asm/iommu.h>
+#include <asm/smu.h>
+#include <asm/pmc.h>
+#include <asm/mpic.h>
+#include <asm/lmb.h>
+
+#include "pmac.h"
+
+#undef SHOW_GATWICK_IRQS
+
+unsigned char drive_info;
+
+int ppc_override_l2cr = 0;
+int ppc_override_l2cr_value;
+int has_l2cache = 0;
+
+int pmac_newworld = 1;
+
+static int current_root_goodness = -1;
+
+extern int pmac_newworld;
+extern struct machdep_calls pmac_md;
+
+#define DEFAULT_ROOT_DEVICE Root_SDA1	/* sda1 - slightly silly choice */
+
+#ifdef CONFIG_PPC64
+#include <asm/udbg.h>
+int sccdbg;
+#endif
+
+extern void zs_kgdb_hook(int tty_num);
+
+sys_ctrler_t sys_ctrler = SYS_CTRLER_UNKNOWN;
+EXPORT_SYMBOL(sys_ctrler);
+
+#ifdef CONFIG_PMAC_SMU
+unsigned long smu_cmdbuf_abs;
+EXPORT_SYMBOL(smu_cmdbuf_abs);
+#endif
+
+#ifdef CONFIG_SMP
+extern struct smp_ops_t psurge_smp_ops;
+extern struct smp_ops_t core99_smp_ops;
+#endif /* CONFIG_SMP */
+
+static void pmac_show_cpuinfo(struct seq_file *m)
+{
+	struct device_node *np;
+	char *pp;
+	int plen;
+	int mbmodel;
+	unsigned int mbflags;
+	char* mbname;
+
+	mbmodel = pmac_call_feature(PMAC_FTR_GET_MB_INFO, NULL,
+				    PMAC_MB_INFO_MODEL, 0);
+	mbflags = pmac_call_feature(PMAC_FTR_GET_MB_INFO, NULL,
+				    PMAC_MB_INFO_FLAGS, 0);
+	if (pmac_call_feature(PMAC_FTR_GET_MB_INFO, NULL, PMAC_MB_INFO_NAME,
+			      (long) &mbname) != 0)
+		mbname = "Unknown";
+
+	/* find motherboard type */
+	seq_printf(m, "machine\t\t: ");
+	np = of_find_node_by_path("/");
+	if (np != NULL) {
+		pp = (char *) get_property(np, "model", NULL);
+		if (pp != NULL)
+			seq_printf(m, "%s\n", pp);
+		else
+			seq_printf(m, "PowerMac\n");
+		pp = (char *) get_property(np, "compatible", &plen);
+		if (pp != NULL) {
+			seq_printf(m, "motherboard\t:");
+			while (plen > 0) {
+				int l = strlen(pp) + 1;
+				seq_printf(m, " %s", pp);
+				plen -= l;
+				pp += l;
+			}
+			seq_printf(m, "\n");
+		}
+		of_node_put(np);
+	} else
+		seq_printf(m, "PowerMac\n");
+
+	/* print parsed model */
+	seq_printf(m, "detected as\t: %d (%s)\n", mbmodel, mbname);
+	seq_printf(m, "pmac flags\t: %08x\n", mbflags);
+
+	/* find l2 cache info */
+	np = of_find_node_by_name(NULL, "l2-cache");
+	if (np == NULL)
+		np = of_find_node_by_type(NULL, "cache");
+	if (np != NULL) {
+		unsigned int *ic = (unsigned int *)
+			get_property(np, "i-cache-size", NULL);
+		unsigned int *dc = (unsigned int *)
+			get_property(np, "d-cache-size", NULL);
+		seq_printf(m, "L2 cache\t:");
+		has_l2cache = 1;
+		if (get_property(np, "cache-unified", NULL) != 0 && dc) {
+			seq_printf(m, " %dK unified", *dc / 1024);
+		} else {
+			if (ic)
+				seq_printf(m, " %dK instruction", *ic / 1024);
+			if (dc)
+				seq_printf(m, "%s %dK data",
+					   (ic? " +": ""), *dc / 1024);
+		}
+		pp = get_property(np, "ram-type", NULL);
+		if (pp)
+			seq_printf(m, " %s", pp);
+		seq_printf(m, "\n");
+		of_node_put(np);
+	}
+
+	/* Indicate newworld/oldworld */
+	seq_printf(m, "pmac-generation\t: %s\n",
+		   pmac_newworld ? "NewWorld" : "OldWorld");
+}
+
+#ifndef CONFIG_ADB_CUDA
+int find_via_cuda(void)
+{
+	if (!find_devices("via-cuda"))
+		return 0;
+	printk("WARNING ! Your machine is CUDA-based but your kernel\n");
+	printk("          wasn't compiled with CONFIG_ADB_CUDA option !\n");
+	return 0;
+}
+#endif
+
+#ifndef CONFIG_ADB_PMU
+int find_via_pmu(void)
+{
+	if (!find_devices("via-pmu"))
+		return 0;
+	printk("WARNING ! Your machine is PMU-based but your kernel\n");
+	printk("          wasn't compiled with CONFIG_ADB_PMU option !\n");
+	return 0;
+}
+#endif
+
+#ifndef CONFIG_PMAC_SMU
+int smu_init(void)
+{
+	/* should check and warn if SMU is present */
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_PPC32
+static volatile u32 *sysctrl_regs;
+
+static void __init ohare_init(void)
+{
+	/* this area has the CPU identification register
+	   and some registers used by smp boards */
+	sysctrl_regs = (volatile u32 *) ioremap(0xf8000000, 0x1000);
+
+	/*
+	 * Turn on the L2 cache.
+	 * We assume that we have a PSX memory controller iff
+	 * we have an ohare I/O controller.
+	 */
+	if (find_devices("ohare") != NULL) {
+		if (((sysctrl_regs[2] >> 24) & 0xf) >= 3) {
+			if (sysctrl_regs[4] & 0x10)
+				sysctrl_regs[4] |= 0x04000020;
+			else
+				sysctrl_regs[4] |= 0x04000000;
+			if(has_l2cache)
+				printk(KERN_INFO "Level 2 cache enabled\n");
+		}
+	}
+}
+
+static void __init l2cr_init(void)
+{
+	/* Checks "l2cr-value" property in the registry */
+	if (cpu_has_feature(CPU_FTR_L2CR)) {
+		struct device_node *np = find_devices("cpus");
+		if (np == 0)
+			np = find_type_devices("cpu");
+		if (np != 0) {
+			unsigned int *l2cr = (unsigned int *)
+				get_property(np, "l2cr-value", NULL);
+			if (l2cr != 0) {
+				ppc_override_l2cr = 1;
+				ppc_override_l2cr_value = *l2cr;
+				_set_L2CR(0);
+				_set_L2CR(ppc_override_l2cr_value);
+			}
+		}
+	}
+
+	if (ppc_override_l2cr)
+		printk(KERN_INFO "L2CR overridden (0x%x), "
+		       "backside cache is %s\n",
+		       ppc_override_l2cr_value,
+		       (ppc_override_l2cr_value & 0x80000000)
+				? "enabled" : "disabled");
+}
+#endif
+
+void __init pmac_setup_arch(void)
+{
+	struct device_node *cpu, *ic;
+	int *fp;
+	unsigned long pvr;
+
+	pvr = PVR_VER(mfspr(SPRN_PVR));
+
+	/* Set loops_per_jiffy to a half-way reasonable value,
+	   for use until calibrate_delay gets called. */
+	loops_per_jiffy = 50000000 / HZ;
+	cpu = of_find_node_by_type(NULL, "cpu");
+	if (cpu != NULL) {
+		fp = (int *) get_property(cpu, "clock-frequency", NULL);
+		if (fp != NULL) {
+			if (pvr >= 0x30 && pvr < 0x80)
+				/* PPC970 etc. */
+				loops_per_jiffy = *fp / (3 * HZ);
+			else if (pvr == 4 || pvr >= 8)
+				/* 604, G3, G4 etc. */
+				loops_per_jiffy = *fp / HZ;
+			else
+				/* 601, 603, etc. */
+				loops_per_jiffy = *fp / (2 * HZ);
+		}
+		of_node_put(cpu);
+	}
+
+	/* See if newworld or oldworld */
+	for (ic = NULL; (ic = of_find_all_nodes(ic)) != NULL; )
+		if (get_property(ic, "interrupt-controller", NULL))
+			break;
+	pmac_newworld = (ic != NULL);
+	if (ic)
+		of_node_put(ic);
+
+	/* Lookup PCI hosts */
+	pmac_pci_init();
+
+#ifdef CONFIG_PPC32
+	ohare_init();
+	l2cr_init();
+#endif /* CONFIG_PPC32 */
+
+#ifdef CONFIG_PPC64
+	/* Probe motherboard chipset */
+	/* this is done earlier in setup_arch for 32-bit */
+	pmac_feature_init();
+
+	/* We can NAP */
+	powersave_nap = 1;
+	printk(KERN_INFO "Using native/NAP idle loop\n");
+#endif
+
+#ifdef CONFIG_KGDB
+	zs_kgdb_hook(0);
+#endif
+
+	find_via_cuda();
+	find_via_pmu();
+	smu_init();
+
+#if defined(CONFIG_NVRAM) || defined(CONFIG_PPC64)
+	pmac_nvram_init();
+#endif
+
+#ifdef CONFIG_PPC32
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (initrd_start)
+		ROOT_DEV = Root_RAM0;
+	else
+#endif
+		ROOT_DEV = DEFAULT_ROOT_DEVICE;
+#endif
+
+#ifdef CONFIG_SMP
+	/* Check for Core99 */
+	if (find_devices("uni-n") || find_devices("u3"))
+		smp_ops = &core99_smp_ops;
+#ifdef CONFIG_PPC32
+	else
+		smp_ops = &psurge_smp_ops;
+#endif
+#endif /* CONFIG_SMP */
+}
+
+char *bootpath;
+char *bootdevice;
+void *boot_host;
+int boot_target;
+int boot_part;
+extern dev_t boot_dev;
+
+#ifdef CONFIG_SCSI
+void __init note_scsi_host(struct device_node *node, void *host)
+{
+	int l;
+	char *p;
+
+	l = strlen(node->full_name);
+	if (bootpath != NULL && bootdevice != NULL
+	    && strncmp(node->full_name, bootdevice, l) == 0
+	    && (bootdevice[l] == '/' || bootdevice[l] == 0)) {
+		boot_host = host;
+		/*
+		 * There's a bug in OF 1.0.5.  (Why am I not surprised.)
+		 * If you pass a path like scsi/sd@1:0 to canon, it returns
+		 * something like /bandit@F2000000/gc@10/53c94@10000/sd@0,0
+		 * That is, the scsi target number doesn't get preserved.
+		 * So we pick the target number out of bootpath and use that.
+		 */
+		p = strstr(bootpath, "/sd@");
+		if (p != NULL) {
+			p += 4;
+			boot_target = simple_strtoul(p, NULL, 10);
+			p = strchr(p, ':');
+			if (p != NULL)
+				boot_part = simple_strtoul(p + 1, NULL, 10);
+		}
+	}
+}
+EXPORT_SYMBOL(note_scsi_host);
+#endif
+
+#if defined(CONFIG_BLK_DEV_IDE) && defined(CONFIG_BLK_DEV_IDE_PMAC)
+static dev_t __init find_ide_boot(void)
+{
+	char *p;
+	int n;
+	dev_t __init pmac_find_ide_boot(char *bootdevice, int n);
+
+	if (bootdevice == NULL)
+		return 0;
+	p = strrchr(bootdevice, '/');
+	if (p == NULL)
+		return 0;
+	n = p - bootdevice;
+
+	return pmac_find_ide_boot(bootdevice, n);
+}
+#endif /* CONFIG_BLK_DEV_IDE && CONFIG_BLK_DEV_IDE_PMAC */
+
+static void __init find_boot_device(void)
+{
+#if defined(CONFIG_BLK_DEV_IDE) && defined(CONFIG_BLK_DEV_IDE_PMAC)
+	boot_dev = find_ide_boot();
+#endif
+}
+
+/* TODO: Merge the suspend-to-ram with the common code !!!
+ * currently, this is a stub implementation for suspend-to-disk
+ * only
+ */
+
+#ifdef CONFIG_SOFTWARE_SUSPEND
+
+static int pmac_pm_prepare(suspend_state_t state)
+{
+	printk(KERN_DEBUG "%s(%d)\n", __FUNCTION__, state);
+
+	return 0;
+}
+
+static int pmac_pm_enter(suspend_state_t state)
+{
+	printk(KERN_DEBUG "%s(%d)\n", __FUNCTION__, state);
+
+	/* Giveup the lazy FPU & vec so we don't have to back them
+	 * up from the low level code
+	 */
+	enable_kernel_fp();
+
+#ifdef CONFIG_ALTIVEC
+	if (cur_cpu_spec->cpu_features & CPU_FTR_ALTIVEC)
+		enable_kernel_altivec();
+#endif /* CONFIG_ALTIVEC */
+
+	return 0;
+}
+
+static int pmac_pm_finish(suspend_state_t state)
+{
+	printk(KERN_DEBUG "%s(%d)\n", __FUNCTION__, state);
+
+	/* Restore userland MMU context */
+	set_context(current->active_mm->context, current->active_mm->pgd);
+
+	return 0;
+}
+
+static struct pm_ops pmac_pm_ops = {
+	.pm_disk_mode	= PM_DISK_SHUTDOWN,
+	.prepare	= pmac_pm_prepare,
+	.enter		= pmac_pm_enter,
+	.finish		= pmac_pm_finish,
+};
+
+#endif /* CONFIG_SOFTWARE_SUSPEND */
+
+static int initializing = 1;
+
+static int pmac_late_init(void)
+{
+	initializing = 0;
+#ifdef CONFIG_SOFTWARE_SUSPEND
+	pm_set_ops(&pmac_pm_ops);
+#endif /* CONFIG_SOFTWARE_SUSPEND */
+	return 0;
+}
+
+late_initcall(pmac_late_init);
+
+/* can't be __init - can be called whenever a disk is first accessed */
+void note_bootable_part(dev_t dev, int part, int goodness)
+{
+	static int found_boot = 0;
+	char *p;
+
+	if (!initializing)
+		return;
+	if ((goodness <= current_root_goodness) &&
+	    ROOT_DEV != DEFAULT_ROOT_DEVICE)
+		return;
+	p = strstr(saved_command_line, "root=");
+	if (p != NULL && (p == saved_command_line || p[-1] == ' '))
+		return;
+
+	if (!found_boot) {
+		find_boot_device();
+		found_boot = 1;
+	}
+	if (!boot_dev || dev == boot_dev) {
+		ROOT_DEV = dev + part;
+		boot_dev = 0;
+		current_root_goodness = goodness;
+	}
+}
+
+#ifdef CONFIG_ADB_CUDA
+static void cuda_restart(void)
+{
+	struct adb_request req;
+
+	cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_RESET_SYSTEM);
+	for (;;)
+		cuda_poll();
+}
+
+static void cuda_shutdown(void)
+{
+	struct adb_request req;
+
+	cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_POWERDOWN);
+	for (;;)
+		cuda_poll();
+}
+
+#else
+#define cuda_restart()
+#define cuda_shutdown()
+#endif
+
+#ifndef CONFIG_ADB_PMU
+#define pmu_restart()
+#define pmu_shutdown()
+#endif
+
+#ifndef CONFIG_PMAC_SMU
+#define smu_restart()
+#define smu_shutdown()
+#endif
+
+static void pmac_restart(char *cmd)
+{
+	switch (sys_ctrler) {
+	case SYS_CTRLER_CUDA:
+		cuda_restart();
+		break;
+	case SYS_CTRLER_PMU:
+		pmu_restart();
+		break;
+	case SYS_CTRLER_SMU:
+		smu_restart();
+		break;
+	default: ;
+	}
+}
+
+static void pmac_power_off(void)
+{
+	switch (sys_ctrler) {
+	case SYS_CTRLER_CUDA:
+		cuda_shutdown();
+		break;
+	case SYS_CTRLER_PMU:
+		pmu_shutdown();
+		break;
+	case SYS_CTRLER_SMU:
+		smu_shutdown();
+		break;
+	default: ;
+	}
+}
+
+static void
+pmac_halt(void)
+{
+	pmac_power_off();
+}
+
+#ifdef CONFIG_PPC32
+void __init pmac_init(void)
+{
+	/* isa_io_base gets set in pmac_pci_init */
+	isa_mem_base = PMAC_ISA_MEM_BASE;
+	pci_dram_offset = PMAC_PCI_DRAM_OFFSET;
+	ISA_DMA_THRESHOLD = ~0L;
+	DMA_MODE_READ = 1;
+	DMA_MODE_WRITE = 2;
+
+	ppc_md = pmac_md;
+
+#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
+#ifdef CONFIG_BLK_DEV_IDE_PMAC
+        ppc_ide_md.ide_init_hwif	= pmac_ide_init_hwif_ports;
+        ppc_ide_md.default_io_base	= pmac_ide_get_base;
+#endif /* CONFIG_BLK_DEV_IDE_PMAC */
+#endif /* defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) */
+
+	if (ppc_md.progress) ppc_md.progress("pmac_init(): exit", 0);
+
+}
+#endif
+
+/* 
+ * Early initialization.
+ */
+static void __init pmac_init_early(void)
+{
+#ifdef CONFIG_PPC64
+	/* Initialize hash table, from now on, we can take hash faults
+	 * and call ioremap
+	 */
+	hpte_init_native();
+
+	/* Init SCC */
+	if (strstr(cmd_line, "sccdbg")) {
+		sccdbg = 1;
+		udbg_init_scc(NULL);
+	}
+
+	/* Setup interrupt mapping options */
+	ppc64_interrupt_controller = IC_OPEN_PIC;
+
+	iommu_init_early_u3();
+#endif
+}
+
+static void __init pmac_progress(char *s, unsigned short hex)
+{
+#ifdef CONFIG_PPC64
+	if (sccdbg) {
+		udbg_puts(s);
+		udbg_puts("\n");
+		return;
+	}
+#endif
+#ifdef CONFIG_BOOTX_TEXT
+	if (boot_text_mapped) {
+		btext_drawstring(s);
+		btext_drawchar('\n');
+	}
+#endif /* CONFIG_BOOTX_TEXT */
+}
+
+/*
+ * pmac has no legacy IO, anything calling this function has to
+ * fail or bad things will happen
+ */
+static int pmac_check_legacy_ioport(unsigned int baseport)
+{
+	return -ENODEV;
+}
+
+static int __init pmac_declare_of_platform_devices(void)
+{
+	struct device_node *np, *npp;
+
+	np = find_devices("uni-n");
+	if (np) {
+		for (np = np->child; np != NULL; np = np->sibling)
+			if (strncmp(np->name, "i2c", 3) == 0) {
+				of_platform_device_create(np, "uni-n-i2c",
+							  NULL);
+				break;
+			}
+	}
+	np = find_devices("valkyrie");
+	if (np)
+		of_platform_device_create(np, "valkyrie", NULL);
+	np = find_devices("platinum");
+	if (np)
+		of_platform_device_create(np, "platinum", NULL);
+
+	npp = of_find_node_by_name(NULL, "u3");
+	if (npp) {
+		for (np = NULL; (np = of_get_next_child(npp, np)) != NULL;) {
+			if (strncmp(np->name, "i2c", 3) == 0) {
+				of_platform_device_create(np, "u3-i2c", NULL);
+				of_node_put(np);
+				break;
+			}
+		}
+		of_node_put(npp);
+	}
+        np = of_find_node_by_type(NULL, "smu");
+        if (np) {
+		of_platform_device_create(np, "smu", NULL);
+		of_node_put(np);
+	}
+
+	return 0;
+}
+
+device_initcall(pmac_declare_of_platform_devices);
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init pmac_probe(int platform)
+{
+#ifdef CONFIG_PPC64
+	if (platform != PLATFORM_POWERMAC)
+		return 0;
+
+	/*
+	 * On U3, the DART (iommu) must be allocated now since it
+	 * has an impact on htab_initialize (due to the large page it
+	 * occupies having to be broken up so the DART itself is not
+	 * part of the cacheable linar mapping
+	 */
+	alloc_u3_dart_table();
+#endif
+
+#ifdef CONFIG_PMAC_SMU
+	/*
+	 * SMU based G5s need some memory below 2Gb, at least the current
+	 * driver needs that. We have to allocate it now. We allocate 4k
+	 * (1 small page) for now.
+	 */
+	smu_cmdbuf_abs = lmb_alloc_base(4096, 4096, 0x80000000UL);
+#endif /* CONFIG_PMAC_SMU */
+
+	return 1;
+}
+
+#ifdef CONFIG_PPC64
+static int pmac_probe_mode(struct pci_bus *bus)
+{
+	struct device_node *node = bus->sysdata;
+
+	/* We need to use normal PCI probing for the AGP bus,
+	   since the device for the AGP bridge isn't in the tree. */
+	if (bus->self == NULL && device_is_compatible(node, "u3-agp"))
+		return PCI_PROBE_NORMAL;
+
+	return PCI_PROBE_DEVTREE;
+}
+#endif
+
+struct machdep_calls __initdata pmac_md = {
+#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC64)
+	.cpu_die		= generic_mach_cpu_die,
+#endif
+	.probe			= pmac_probe,
+	.setup_arch		= pmac_setup_arch,
+	.init_early		= pmac_init_early,
+	.show_cpuinfo		= pmac_show_cpuinfo,
+	.init_IRQ		= pmac_pic_init,
+	.get_irq		= mpic_get_irq,	/* changed later */
+	.pcibios_fixup		= pmac_pcibios_fixup,
+	.restart		= pmac_restart,
+	.power_off		= pmac_power_off,
+	.halt			= pmac_halt,
+	.time_init		= pmac_time_init,
+	.get_boot_time		= pmac_get_boot_time,
+	.set_rtc_time		= pmac_set_rtc_time,
+	.get_rtc_time		= pmac_get_rtc_time,
+	.calibrate_decr		= pmac_calibrate_decr,
+	.feature_call		= pmac_do_feature_call,
+	.check_legacy_ioport	= pmac_check_legacy_ioport,
+	.progress		= pmac_progress,
+#ifdef CONFIG_PPC64
+	.pci_probe_mode		= pmac_probe_mode,
+	.idle_loop		= native_idle,
+	.enable_pmcs		= power4_enable_pmcs,
+#endif
+#ifdef CONFIG_PPC32
+	.pcibios_enable_device_hook = pmac_pci_enable_device_hook,
+	.pcibios_after_init	= pmac_pcibios_after_init,
+	.phys_mem_access_prot	= pci_phys_mem_access_prot,
+#endif
+};
diff --git a/arch/powerpc/platforms/powermac/sleep.S b/arch/powerpc/platforms/powermac/sleep.S
new file mode 100644
index 000000000000..22b113d19b24
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/sleep.S
@@ -0,0 +1,396 @@
+/*
+ * This file contains sleep low-level functions for PowerBook G3.
+ *    Copyright (C) 1999 Benjamin Herrenschmidt (benh@kernel.crashing.org)
+ *    and Paul Mackerras (paulus@samba.org).
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/ppc_asm.h>
+#include <asm/cputable.h>
+#include <asm/cache.h>
+#include <asm/thread_info.h>
+#include <asm/asm-offsets.h>
+
+#define MAGIC	0x4c617273	/* 'Lars' */
+
+/*
+ * Structure for storing CPU registers on the stack.
+ */
+#define SL_SP		0
+#define SL_PC		4
+#define SL_MSR		8
+#define SL_SDR1		0xc
+#define SL_SPRG0	0x10	/* 4 sprg's */
+#define SL_DBAT0	0x20
+#define SL_IBAT0	0x28
+#define SL_DBAT1	0x30
+#define SL_IBAT1	0x38
+#define SL_DBAT2	0x40
+#define SL_IBAT2	0x48
+#define SL_DBAT3	0x50
+#define SL_IBAT3	0x58
+#define SL_TB		0x60
+#define SL_R2		0x68
+#define SL_CR		0x6c
+#define SL_R12		0x70	/* r12 to r31 */
+#define SL_SIZE		(SL_R12 + 80)
+
+	.section .text
+	.align	5
+
+#if defined(CONFIG_PM) || defined(CONFIG_CPU_FREQ_PMAC)
+
+/* This gets called by via-pmu.c late during the sleep process.
+ * The PMU was already send the sleep command and will shut us down
+ * soon. We need to save all that is needed and setup the wakeup
+ * vector that will be called by the ROM on wakeup
+ */
+_GLOBAL(low_sleep_handler)
+#ifndef CONFIG_6xx
+	blr
+#else
+	mflr	r0
+	stw	r0,4(r1)
+	stwu	r1,-SL_SIZE(r1)
+	mfcr	r0
+	stw	r0,SL_CR(r1)
+	stw	r2,SL_R2(r1)
+	stmw	r12,SL_R12(r1)
+
+	/* Save MSR & SDR1 */
+	mfmsr	r4
+	stw	r4,SL_MSR(r1)
+	mfsdr1	r4
+	stw	r4,SL_SDR1(r1)
+
+	/* Get a stable timebase and save it */
+1:	mftbu	r4
+	stw	r4,SL_TB(r1)
+	mftb	r5
+	stw	r5,SL_TB+4(r1)
+	mftbu	r3
+	cmpw	r3,r4
+	bne	1b
+
+	/* Save SPRGs */
+	mfsprg	r4,0
+	stw	r4,SL_SPRG0(r1)
+	mfsprg	r4,1
+	stw	r4,SL_SPRG0+4(r1)
+	mfsprg	r4,2
+	stw	r4,SL_SPRG0+8(r1)
+	mfsprg	r4,3
+	stw	r4,SL_SPRG0+12(r1)
+
+	/* Save BATs */
+	mfdbatu	r4,0
+	stw	r4,SL_DBAT0(r1)
+	mfdbatl	r4,0
+	stw	r4,SL_DBAT0+4(r1)
+	mfdbatu	r4,1
+	stw	r4,SL_DBAT1(r1)
+	mfdbatl	r4,1
+	stw	r4,SL_DBAT1+4(r1)
+	mfdbatu	r4,2
+	stw	r4,SL_DBAT2(r1)
+	mfdbatl	r4,2
+	stw	r4,SL_DBAT2+4(r1)
+	mfdbatu	r4,3
+	stw	r4,SL_DBAT3(r1)
+	mfdbatl	r4,3
+	stw	r4,SL_DBAT3+4(r1)
+	mfibatu	r4,0
+	stw	r4,SL_IBAT0(r1)
+	mfibatl	r4,0
+	stw	r4,SL_IBAT0+4(r1)
+	mfibatu	r4,1
+	stw	r4,SL_IBAT1(r1)
+	mfibatl	r4,1
+	stw	r4,SL_IBAT1+4(r1)
+	mfibatu	r4,2
+	stw	r4,SL_IBAT2(r1)
+	mfibatl	r4,2
+	stw	r4,SL_IBAT2+4(r1)
+	mfibatu	r4,3
+	stw	r4,SL_IBAT3(r1)
+	mfibatl	r4,3
+	stw	r4,SL_IBAT3+4(r1)
+
+	/* Backup various CPU config stuffs */
+	bl	__save_cpu_setup
+
+	/* The ROM can wake us up via 2 different vectors:
+	 *  - On wallstreet & lombard, we must write a magic
+	 *    value 'Lars' at address 4 and a pointer to a
+	 *    memory location containing the PC to resume from
+	 *    at address 0.
+	 *  - On Core99, we must store the wakeup vector at
+	 *    address 0x80 and eventually it's parameters
+	 *    at address 0x84. I've have some trouble with those
+	 *    parameters however and I no longer use them.
+	 */
+	lis	r5,grackle_wake_up@ha
+	addi	r5,r5,grackle_wake_up@l
+	tophys(r5,r5)
+	stw	r5,SL_PC(r1)
+	lis	r4,KERNELBASE@h
+	tophys(r5,r1)
+	addi	r5,r5,SL_PC
+	lis	r6,MAGIC@ha
+	addi	r6,r6,MAGIC@l
+	stw	r5,0(r4)
+	stw	r6,4(r4)
+	/* Setup stuffs at 0x80-0x84 for Core99 */
+	lis	r3,core99_wake_up@ha
+	addi	r3,r3,core99_wake_up@l
+	tophys(r3,r3)
+	stw	r3,0x80(r4)
+	stw	r5,0x84(r4)
+	/* Store a pointer to our backup storage into
+	 * a kernel global
+	 */
+	lis r3,sleep_storage@ha
+	addi r3,r3,sleep_storage@l
+	stw r5,0(r3)
+
+	.globl	low_cpu_die
+low_cpu_die:
+	/* Flush & disable all caches */
+	bl	flush_disable_caches
+
+	/* Turn off data relocation. */
+	mfmsr	r3		/* Save MSR in r7 */
+	rlwinm	r3,r3,0,28,26	/* Turn off DR bit */
+	sync
+	mtmsr	r3
+	isync
+
+BEGIN_FTR_SECTION
+	/* Flush any pending L2 data prefetches to work around HW bug */
+	sync
+	lis	r3,0xfff0
+	lwz	r0,0(r3)	/* perform cache-inhibited load to ROM */
+	sync			/* (caches are disabled at this point) */
+END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450)
+
+/*
+ * Set the HID0 and MSR for sleep.
+ */
+	mfspr	r2,SPRN_HID0
+	rlwinm	r2,r2,0,10,7	/* clear doze, nap */
+	oris	r2,r2,HID0_SLEEP@h
+	sync
+	isync
+	mtspr	SPRN_HID0,r2
+	sync
+
+/* This loop puts us back to sleep in case we have a spurrious
+ * wakeup so that the host bridge properly stays asleep. The
+ * CPU will be turned off, either after a known time (about 1
+ * second) on wallstreet & lombard, or as soon as the CPU enters
+ * SLEEP mode on core99
+ */
+	mfmsr	r2
+	oris	r2,r2,MSR_POW@h
+1:	sync
+	mtmsr	r2
+	isync
+	b	1b
+
+/*
+ * Here is the resume code.
+ */
+
+
+/*
+ * Core99 machines resume here
+ * r4 has the physical address of SL_PC(sp) (unused)
+ */
+_GLOBAL(core99_wake_up)
+	/* Make sure HID0 no longer contains any sleep bit and that data cache
+	 * is disabled
+	 */
+	mfspr	r3,SPRN_HID0
+	rlwinm	r3,r3,0,11,7		/* clear SLEEP, NAP, DOZE bits */
+	rlwinm	3,r3,0,18,15		/* clear DCE, ICE */
+	mtspr	SPRN_HID0,r3
+	sync
+	isync
+
+	/* sanitize MSR */
+	mfmsr	r3
+	ori	r3,r3,MSR_EE|MSR_IP
+	xori	r3,r3,MSR_EE|MSR_IP
+	sync
+	isync
+	mtmsr	r3
+	sync
+	isync
+
+	/* Recover sleep storage */
+	lis	r3,sleep_storage@ha
+	addi	r3,r3,sleep_storage@l
+	tophys(r3,r3)
+	lwz	r1,0(r3)
+
+	/* Pass thru to older resume code ... */
+/*
+ * Here is the resume code for older machines.
+ * r1 has the physical address of SL_PC(sp).
+ */
+
+grackle_wake_up:
+
+	/* Restore the kernel's segment registers before
+	 * we do any r1 memory access as we are not sure they
+	 * are in a sane state above the first 256Mb region
+	 */
+	li	r0,16		/* load up segment register values */
+	mtctr	r0		/* for context 0 */
+	lis	r3,0x2000	/* Ku = 1, VSID = 0 */
+	li	r4,0
+3:	mtsrin	r3,r4
+	addi	r3,r3,0x111	/* increment VSID */
+	addis	r4,r4,0x1000	/* address of next segment */
+	bdnz	3b
+	sync
+	isync
+
+	subi	r1,r1,SL_PC
+
+	/* Restore various CPU config stuffs */
+	bl	__restore_cpu_setup
+
+	/* Make sure all FPRs have been initialized */
+	bl	reloc_offset
+	bl	__init_fpu_registers
+
+	/* Invalidate & enable L1 cache, we don't care about
+	 * whatever the ROM may have tried to write to memory
+	 */
+	bl	__inval_enable_L1
+
+	/* Restore the BATs, and SDR1.  Then we can turn on the MMU. */
+	lwz	r4,SL_SDR1(r1)
+	mtsdr1	r4
+	lwz	r4,SL_SPRG0(r1)
+	mtsprg	0,r4
+	lwz	r4,SL_SPRG0+4(r1)
+	mtsprg	1,r4
+	lwz	r4,SL_SPRG0+8(r1)
+	mtsprg	2,r4
+	lwz	r4,SL_SPRG0+12(r1)
+	mtsprg	3,r4
+
+	lwz	r4,SL_DBAT0(r1)
+	mtdbatu	0,r4
+	lwz	r4,SL_DBAT0+4(r1)
+	mtdbatl	0,r4
+	lwz	r4,SL_DBAT1(r1)
+	mtdbatu	1,r4
+	lwz	r4,SL_DBAT1+4(r1)
+	mtdbatl	1,r4
+	lwz	r4,SL_DBAT2(r1)
+	mtdbatu	2,r4
+	lwz	r4,SL_DBAT2+4(r1)
+	mtdbatl	2,r4
+	lwz	r4,SL_DBAT3(r1)
+	mtdbatu	3,r4
+	lwz	r4,SL_DBAT3+4(r1)
+	mtdbatl	3,r4
+	lwz	r4,SL_IBAT0(r1)
+	mtibatu	0,r4
+	lwz	r4,SL_IBAT0+4(r1)
+	mtibatl	0,r4
+	lwz	r4,SL_IBAT1(r1)
+	mtibatu	1,r4
+	lwz	r4,SL_IBAT1+4(r1)
+	mtibatl	1,r4
+	lwz	r4,SL_IBAT2(r1)
+	mtibatu	2,r4
+	lwz	r4,SL_IBAT2+4(r1)
+	mtibatl	2,r4
+	lwz	r4,SL_IBAT3(r1)
+	mtibatu	3,r4
+	lwz	r4,SL_IBAT3+4(r1)
+	mtibatl	3,r4
+
+BEGIN_FTR_SECTION
+	li	r4,0
+	mtspr	SPRN_DBAT4U,r4
+	mtspr	SPRN_DBAT4L,r4
+	mtspr	SPRN_DBAT5U,r4
+	mtspr	SPRN_DBAT5L,r4
+	mtspr	SPRN_DBAT6U,r4
+	mtspr	SPRN_DBAT6L,r4
+	mtspr	SPRN_DBAT7U,r4
+	mtspr	SPRN_DBAT7L,r4
+	mtspr	SPRN_IBAT4U,r4
+	mtspr	SPRN_IBAT4L,r4
+	mtspr	SPRN_IBAT5U,r4
+	mtspr	SPRN_IBAT5L,r4
+	mtspr	SPRN_IBAT6U,r4
+	mtspr	SPRN_IBAT6L,r4
+	mtspr	SPRN_IBAT7U,r4
+	mtspr	SPRN_IBAT7L,r4
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_HIGH_BATS)
+
+	/* Flush all TLBs */
+	lis	r4,0x1000
+1:	addic.	r4,r4,-0x1000
+	tlbie	r4
+	blt	1b
+	sync
+
+	/* restore the MSR and turn on the MMU */
+	lwz	r3,SL_MSR(r1)
+	bl	turn_on_mmu
+
+	/* get back the stack pointer */
+	tovirt(r1,r1)
+
+	/* Restore TB */
+	li	r3,0
+	mttbl	r3
+	lwz	r3,SL_TB(r1)
+	lwz	r4,SL_TB+4(r1)
+	mttbu	r3
+	mttbl	r4
+
+	/* Restore the callee-saved registers and return */
+	lwz	r0,SL_CR(r1)
+	mtcr	r0
+	lwz	r2,SL_R2(r1)
+	lmw	r12,SL_R12(r1)
+	addi	r1,r1,SL_SIZE
+	lwz	r0,4(r1)
+	mtlr	r0
+	blr
+
+turn_on_mmu:
+	mflr	r4
+	tovirt(r4,r4)
+	mtsrr0	r4
+	mtsrr1	r3
+	sync
+	isync
+	rfi
+
+#endif /* defined(CONFIG_PM) || defined(CONFIG_CPU_FREQ) */
+
+	.section .data
+	.balign	L1_CACHE_BYTES
+sleep_storage:
+	.long 0
+	.balign	L1_CACHE_BYTES, 0
+
+#endif /* CONFIG_6xx */
+	.section .text
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
new file mode 100644
index 000000000000..fb2a7c798e82
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -0,0 +1,878 @@
+/*
+ * SMP support for power macintosh.
+ *
+ * We support both the old "powersurge" SMP architecture
+ * and the current Core99 (G4 PowerMac) machines.
+ *
+ * Note that we don't support the very first rev. of
+ * Apple/DayStar 2 CPUs board, the one with the funky
+ * watchdog. Hopefully, none of these should be there except
+ * maybe internally to Apple. I should probably still add some
+ * code to detect this card though and disable SMP. --BenH.
+ *
+ * Support Macintosh G4 SMP by Troy Benjegerdes (hozer@drgw.net)
+ * and Ben Herrenschmidt <benh@kernel.crashing.org>.
+ *
+ * Support for DayStar quad CPU cards
+ * Copyright (C) XLR8, Inc. 1994-2000
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/hardirq.h>
+#include <linux/cpu.h>
+#include <linux/compiler.h>
+
+#include <asm/ptrace.h>
+#include <asm/atomic.h>
+#include <asm/irq.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/smp.h>
+#include <asm/machdep.h>
+#include <asm/pmac_feature.h>
+#include <asm/time.h>
+#include <asm/mpic.h>
+#include <asm/cacheflush.h>
+#include <asm/keylargo.h>
+#include <asm/pmac_low_i2c.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+extern void __secondary_start_pmac_0(void);
+
+#ifdef CONFIG_PPC32
+
+/* Sync flag for HW tb sync */
+static volatile int sec_tb_reset = 0;
+
+/*
+ * Powersurge (old powermac SMP) support.
+ */
+
+/* Addresses for powersurge registers */
+#define HAMMERHEAD_BASE		0xf8000000
+#define HHEAD_CONFIG		0x90
+#define HHEAD_SEC_INTR		0xc0
+
+/* register for interrupting the primary processor on the powersurge */
+/* N.B. this is actually the ethernet ROM! */
+#define PSURGE_PRI_INTR		0xf3019000
+
+/* register for storing the start address for the secondary processor */
+/* N.B. this is the PCI config space address register for the 1st bridge */
+#define PSURGE_START		0xf2800000
+
+/* Daystar/XLR8 4-CPU card */
+#define PSURGE_QUAD_REG_ADDR	0xf8800000
+
+#define PSURGE_QUAD_IRQ_SET	0
+#define PSURGE_QUAD_IRQ_CLR	1
+#define PSURGE_QUAD_IRQ_PRIMARY	2
+#define PSURGE_QUAD_CKSTOP_CTL	3
+#define PSURGE_QUAD_PRIMARY_ARB	4
+#define PSURGE_QUAD_BOARD_ID	6
+#define PSURGE_QUAD_WHICH_CPU	7
+#define PSURGE_QUAD_CKSTOP_RDBK	8
+#define PSURGE_QUAD_RESET_CTL	11
+
+#define PSURGE_QUAD_OUT(r, v)	(out_8(quad_base + ((r) << 4) + 4, (v)))
+#define PSURGE_QUAD_IN(r)	(in_8(quad_base + ((r) << 4) + 4) & 0x0f)
+#define PSURGE_QUAD_BIS(r, v)	(PSURGE_QUAD_OUT((r), PSURGE_QUAD_IN(r) | (v)))
+#define PSURGE_QUAD_BIC(r, v)	(PSURGE_QUAD_OUT((r), PSURGE_QUAD_IN(r) & ~(v)))
+
+/* virtual addresses for the above */
+static volatile u8 __iomem *hhead_base;
+static volatile u8 __iomem *quad_base;
+static volatile u32 __iomem *psurge_pri_intr;
+static volatile u8 __iomem *psurge_sec_intr;
+static volatile u32 __iomem *psurge_start;
+
+/* values for psurge_type */
+#define PSURGE_NONE		-1
+#define PSURGE_DUAL		0
+#define PSURGE_QUAD_OKEE	1
+#define PSURGE_QUAD_COTTON	2
+#define PSURGE_QUAD_ICEGRASS	3
+
+/* what sort of powersurge board we have */
+static int psurge_type = PSURGE_NONE;
+
+/*
+ * Set and clear IPIs for powersurge.
+ */
+static inline void psurge_set_ipi(int cpu)
+{
+	if (psurge_type == PSURGE_NONE)
+		return;
+	if (cpu == 0)
+		in_be32(psurge_pri_intr);
+	else if (psurge_type == PSURGE_DUAL)
+		out_8(psurge_sec_intr, 0);
+	else
+		PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_SET, 1 << cpu);
+}
+
+static inline void psurge_clr_ipi(int cpu)
+{
+	if (cpu > 0) {
+		switch(psurge_type) {
+		case PSURGE_DUAL:
+			out_8(psurge_sec_intr, ~0);
+		case PSURGE_NONE:
+			break;
+		default:
+			PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_CLR, 1 << cpu);
+		}
+	}
+}
+
+/*
+ * On powersurge (old SMP powermac architecture) we don't have
+ * separate IPIs for separate messages like openpic does.  Instead
+ * we have a bitmap for each processor, where a 1 bit means that
+ * the corresponding message is pending for that processor.
+ * Ideally each cpu's entry would be in a different cache line.
+ *  -- paulus.
+ */
+static unsigned long psurge_smp_message[NR_CPUS];
+
+void psurge_smp_message_recv(struct pt_regs *regs)
+{
+	int cpu = smp_processor_id();
+	int msg;
+
+	/* clear interrupt */
+	psurge_clr_ipi(cpu);
+
+	if (num_online_cpus() < 2)
+		return;
+
+	/* make sure there is a message there */
+	for (msg = 0; msg < 4; msg++)
+		if (test_and_clear_bit(msg, &psurge_smp_message[cpu]))
+			smp_message_recv(msg, regs);
+}
+
+irqreturn_t psurge_primary_intr(int irq, void *d, struct pt_regs *regs)
+{
+	psurge_smp_message_recv(regs);
+	return IRQ_HANDLED;
+}
+
+static void smp_psurge_message_pass(int target, int msg)
+{
+	int i;
+
+	if (num_online_cpus() < 2)
+		return;
+
+	for (i = 0; i < NR_CPUS; i++) {
+		if (!cpu_online(i))
+			continue;
+		if (target == MSG_ALL
+		    || (target == MSG_ALL_BUT_SELF && i != smp_processor_id())
+		    || target == i) {
+			set_bit(msg, &psurge_smp_message[i]);
+			psurge_set_ipi(i);
+		}
+	}
+}
+
+/*
+ * Determine a quad card presence. We read the board ID register, we
+ * force the data bus to change to something else, and we read it again.
+ * It it's stable, then the register probably exist (ugh !)
+ */
+static int __init psurge_quad_probe(void)
+{
+	int type;
+	unsigned int i;
+
+	type = PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID);
+	if (type < PSURGE_QUAD_OKEE || type > PSURGE_QUAD_ICEGRASS
+	    || type != PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID))
+		return PSURGE_DUAL;
+
+	/* looks OK, try a slightly more rigorous test */
+	/* bogus is not necessarily cacheline-aligned,
+	   though I don't suppose that really matters.  -- paulus */
+	for (i = 0; i < 100; i++) {
+		volatile u32 bogus[8];
+		bogus[(0+i)%8] = 0x00000000;
+		bogus[(1+i)%8] = 0x55555555;
+		bogus[(2+i)%8] = 0xFFFFFFFF;
+		bogus[(3+i)%8] = 0xAAAAAAAA;
+		bogus[(4+i)%8] = 0x33333333;
+		bogus[(5+i)%8] = 0xCCCCCCCC;
+		bogus[(6+i)%8] = 0xCCCCCCCC;
+		bogus[(7+i)%8] = 0x33333333;
+		wmb();
+		asm volatile("dcbf 0,%0" : : "r" (bogus) : "memory");
+		mb();
+		if (type != PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID))
+			return PSURGE_DUAL;
+	}
+	return type;
+}
+
+static void __init psurge_quad_init(void)
+{
+	int procbits;
+
+	if (ppc_md.progress) ppc_md.progress("psurge_quad_init", 0x351);
+	procbits = ~PSURGE_QUAD_IN(PSURGE_QUAD_WHICH_CPU);
+	if (psurge_type == PSURGE_QUAD_ICEGRASS)
+		PSURGE_QUAD_BIS(PSURGE_QUAD_RESET_CTL, procbits);
+	else
+		PSURGE_QUAD_BIC(PSURGE_QUAD_CKSTOP_CTL, procbits);
+	mdelay(33);
+	out_8(psurge_sec_intr, ~0);
+	PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_CLR, procbits);
+	PSURGE_QUAD_BIS(PSURGE_QUAD_RESET_CTL, procbits);
+	if (psurge_type != PSURGE_QUAD_ICEGRASS)
+		PSURGE_QUAD_BIS(PSURGE_QUAD_CKSTOP_CTL, procbits);
+	PSURGE_QUAD_BIC(PSURGE_QUAD_PRIMARY_ARB, procbits);
+	mdelay(33);
+	PSURGE_QUAD_BIC(PSURGE_QUAD_RESET_CTL, procbits);
+	mdelay(33);
+	PSURGE_QUAD_BIS(PSURGE_QUAD_PRIMARY_ARB, procbits);
+	mdelay(33);
+}
+
+static int __init smp_psurge_probe(void)
+{
+	int i, ncpus;
+
+	/* We don't do SMP on the PPC601 -- paulus */
+	if (PVR_VER(mfspr(SPRN_PVR)) == 1)
+		return 1;
+
+	/*
+	 * The powersurge cpu board can be used in the generation
+	 * of powermacs that have a socket for an upgradeable cpu card,
+	 * including the 7500, 8500, 9500, 9600.
+	 * The device tree doesn't tell you if you have 2 cpus because
+	 * OF doesn't know anything about the 2nd processor.
+	 * Instead we look for magic bits in magic registers,
+	 * in the hammerhead memory controller in the case of the
+	 * dual-cpu powersurge board.  -- paulus.
+	 */
+	if (find_devices("hammerhead") == NULL)
+		return 1;
+
+	hhead_base = ioremap(HAMMERHEAD_BASE, 0x800);
+	quad_base = ioremap(PSURGE_QUAD_REG_ADDR, 1024);
+	psurge_sec_intr = hhead_base + HHEAD_SEC_INTR;
+
+	psurge_type = psurge_quad_probe();
+	if (psurge_type != PSURGE_DUAL) {
+		psurge_quad_init();
+		/* All released cards using this HW design have 4 CPUs */
+		ncpus = 4;
+	} else {
+		iounmap(quad_base);
+		if ((in_8(hhead_base + HHEAD_CONFIG) & 0x02) == 0) {
+			/* not a dual-cpu card */
+			iounmap(hhead_base);
+			psurge_type = PSURGE_NONE;
+			return 1;
+		}
+		ncpus = 2;
+	}
+
+	psurge_start = ioremap(PSURGE_START, 4);
+	psurge_pri_intr = ioremap(PSURGE_PRI_INTR, 4);
+
+	/*
+	 * This is necessary because OF doesn't know about the
+	 * secondary cpu(s), and thus there aren't nodes in the
+	 * device tree for them, and smp_setup_cpu_maps hasn't
+	 * set their bits in cpu_possible_map and cpu_present_map.
+	 */
+	if (ncpus > NR_CPUS)
+		ncpus = NR_CPUS;
+	for (i = 1; i < ncpus ; ++i) {
+		cpu_set(i, cpu_present_map);
+		cpu_set(i, cpu_possible_map);
+		set_hard_smp_processor_id(i, i);
+	}
+
+	if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352);
+
+	return ncpus;
+}
+
+static void __init smp_psurge_kick_cpu(int nr)
+{
+	unsigned long start = __pa(__secondary_start_pmac_0) + nr * 8;
+	unsigned long a;
+
+	/* may need to flush here if secondary bats aren't setup */
+	for (a = KERNELBASE; a < KERNELBASE + 0x800000; a += 32)
+		asm volatile("dcbf 0,%0" : : "r" (a) : "memory");
+	asm volatile("sync");
+
+	if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu", 0x353);
+
+	out_be32(psurge_start, start);
+	mb();
+
+	psurge_set_ipi(nr);
+	udelay(10);
+	psurge_clr_ipi(nr);
+
+	if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354);
+}
+
+/*
+ * With the dual-cpu powersurge board, the decrementers and timebases
+ * of both cpus are frozen after the secondary cpu is started up,
+ * until we give the secondary cpu another interrupt.  This routine
+ * uses this to get the timebases synchronized.
+ *  -- paulus.
+ */
+static void __init psurge_dual_sync_tb(int cpu_nr)
+{
+	int t;
+
+	set_dec(tb_ticks_per_jiffy);
+	/* XXX fixme */
+	set_tb(0, 0);
+	last_jiffy_stamp(cpu_nr) = 0;
+
+	if (cpu_nr > 0) {
+		mb();
+		sec_tb_reset = 1;
+		return;
+	}
+
+	/* wait for the secondary to have reset its TB before proceeding */
+	for (t = 10000000; t > 0 && !sec_tb_reset; --t)
+		;
+
+	/* now interrupt the secondary, starting both TBs */
+	psurge_set_ipi(1);
+}
+
+static struct irqaction psurge_irqaction = {
+	.handler = psurge_primary_intr,
+	.flags = SA_INTERRUPT,
+	.mask = CPU_MASK_NONE,
+	.name = "primary IPI",
+};
+
+static void __init smp_psurge_setup_cpu(int cpu_nr)
+{
+
+	if (cpu_nr == 0) {
+		/* If we failed to start the second CPU, we should still
+		 * send it an IPI to start the timebase & DEC or we might
+		 * have them stuck.
+		 */
+		if (num_online_cpus() < 2) {
+			if (psurge_type == PSURGE_DUAL)
+				psurge_set_ipi(1);
+			return;
+		}
+		/* reset the entry point so if we get another intr we won't
+		 * try to startup again */
+		out_be32(psurge_start, 0x100);
+		if (setup_irq(30, &psurge_irqaction))
+			printk(KERN_ERR "Couldn't get primary IPI interrupt");
+	}
+
+	if (psurge_type == PSURGE_DUAL)
+		psurge_dual_sync_tb(cpu_nr);
+}
+
+void __init smp_psurge_take_timebase(void)
+{
+	/* Dummy implementation */
+}
+
+void __init smp_psurge_give_timebase(void)
+{
+	/* Dummy implementation */
+}
+
+/* PowerSurge-style Macs */
+struct smp_ops_t psurge_smp_ops = {
+	.message_pass	= smp_psurge_message_pass,
+	.probe		= smp_psurge_probe,
+	.kick_cpu	= smp_psurge_kick_cpu,
+	.setup_cpu	= smp_psurge_setup_cpu,
+	.give_timebase	= smp_psurge_give_timebase,
+	.take_timebase	= smp_psurge_take_timebase,
+};
+#endif /* CONFIG_PPC32 - actually powersurge support */
+
+#ifdef CONFIG_PPC64
+/*
+ * G5s enable/disable the timebase via an i2c-connected clock chip.
+ */
+static struct device_node *pmac_tb_clock_chip_host;
+static u8 pmac_tb_pulsar_addr;
+static void (*pmac_tb_freeze)(int freeze);
+static DEFINE_SPINLOCK(timebase_lock);
+static unsigned long timebase;
+
+static void smp_core99_cypress_tb_freeze(int freeze)
+{
+	u8 data;
+	int rc;
+
+	/* Strangely, the device-tree says address is 0xd2, but darwin
+	 * accesses 0xd0 ...
+	 */
+	pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_combined);
+	rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
+			       0xd0 | pmac_low_i2c_read,
+			       0x81, &data, 1);
+	if (rc != 0)
+		goto bail;
+
+	data = (data & 0xf3) | (freeze ? 0x00 : 0x0c);
+
+       	pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_stdsub);
+	rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
+			       0xd0 | pmac_low_i2c_write,
+			       0x81, &data, 1);
+
+ bail:
+	if (rc != 0) {
+		printk("Cypress Timebase %s rc: %d\n",
+		       freeze ? "freeze" : "unfreeze", rc);
+		panic("Timebase freeze failed !\n");
+	}
+}
+
+
+static void smp_core99_pulsar_tb_freeze(int freeze)
+{
+	u8 data;
+	int rc;
+
+	pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_combined);
+	rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
+			       pmac_tb_pulsar_addr | pmac_low_i2c_read,
+			       0x2e, &data, 1);
+	if (rc != 0)
+		goto bail;
+
+	data = (data & 0x88) | (freeze ? 0x11 : 0x22);
+
+	pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_stdsub);
+	rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
+			       pmac_tb_pulsar_addr | pmac_low_i2c_write,
+			       0x2e, &data, 1);
+ bail:
+	if (rc != 0) {
+		printk(KERN_ERR "Pulsar Timebase %s rc: %d\n",
+		       freeze ? "freeze" : "unfreeze", rc);
+		panic("Timebase freeze failed !\n");
+	}
+}
+
+
+static void smp_core99_give_timebase(void)
+{
+	/* Open i2c bus for synchronous access */
+	if (pmac_low_i2c_open(pmac_tb_clock_chip_host, 0))
+		panic("Can't open i2c for TB sync !\n");
+
+	spin_lock(&timebase_lock);
+	(*pmac_tb_freeze)(1);
+	mb();
+	timebase = get_tb();
+	spin_unlock(&timebase_lock);
+
+	while (timebase)
+		barrier();
+
+	spin_lock(&timebase_lock);
+	(*pmac_tb_freeze)(0);
+	spin_unlock(&timebase_lock);
+
+	/* Close i2c bus */
+	pmac_low_i2c_close(pmac_tb_clock_chip_host);
+}
+
+
+static void __devinit smp_core99_take_timebase(void)
+{
+	while (!timebase)
+		barrier();
+	spin_lock(&timebase_lock);
+	set_tb(timebase >> 32, timebase & 0xffffffff);
+	timebase = 0;
+	spin_unlock(&timebase_lock);
+}
+
+static void __init smp_core99_setup(int ncpus)
+{
+	struct device_node *cc = NULL;	
+	struct device_node *p;
+	u32 *reg;
+	int ok;
+
+	/* HW sync only on these platforms */
+	if (!machine_is_compatible("PowerMac7,2") &&
+	    !machine_is_compatible("PowerMac7,3") &&
+	    !machine_is_compatible("RackMac3,1"))
+		return;
+
+	/* Look for the clock chip */
+	while ((cc = of_find_node_by_name(cc, "i2c-hwclock")) != NULL) {
+		p = of_get_parent(cc);
+		ok = p && device_is_compatible(p, "uni-n-i2c");
+		of_node_put(p);
+		if (!ok)
+			continue;
+
+		reg = (u32 *)get_property(cc, "reg", NULL);
+		if (reg == NULL)
+			continue;
+
+		switch (*reg) {
+		case 0xd2:
+			if (device_is_compatible(cc, "pulsar-legacy-slewing")) {
+				pmac_tb_freeze = smp_core99_pulsar_tb_freeze;
+				pmac_tb_pulsar_addr = 0xd2;
+				printk(KERN_INFO "Timebase clock is Pulsar chip\n");
+			} else if (device_is_compatible(cc, "cy28508")) {
+				pmac_tb_freeze = smp_core99_cypress_tb_freeze;
+				printk(KERN_INFO "Timebase clock is Cypress chip\n");
+			}
+			break;
+		case 0xd4:
+			pmac_tb_freeze = smp_core99_pulsar_tb_freeze;
+			pmac_tb_pulsar_addr = 0xd4;
+			printk(KERN_INFO "Timebase clock is Pulsar chip\n");
+			break;
+		}
+		if (pmac_tb_freeze != NULL) {
+			pmac_tb_clock_chip_host = of_get_parent(cc);
+			of_node_put(cc);
+			break;
+		}
+	}
+	if (pmac_tb_freeze == NULL) {
+		smp_ops->give_timebase = smp_generic_give_timebase;
+		smp_ops->take_timebase = smp_generic_take_timebase;
+	}
+}
+
+/* nothing to do here, caches are already set up by service processor */
+static inline void __devinit core99_init_caches(int cpu)
+{
+}
+
+#else /* CONFIG_PPC64 */
+
+/*
+ * SMP G4 powermacs use a GPIO to enable/disable the timebase.
+ */
+
+static unsigned int core99_tb_gpio;	/* Timebase freeze GPIO */
+
+static unsigned int pri_tb_hi, pri_tb_lo;
+static unsigned int pri_tb_stamp;
+
+/* not __init, called in sleep/wakeup code */
+void smp_core99_give_timebase(void)
+{
+	unsigned long flags;
+	unsigned int t;
+
+	/* wait for the secondary to be in take_timebase */
+	for (t = 100000; t > 0 && !sec_tb_reset; --t)
+		udelay(10);
+	if (!sec_tb_reset) {
+		printk(KERN_WARNING "Timeout waiting sync on second CPU\n");
+		return;
+	}
+
+	/* freeze the timebase and read it */
+	/* disable interrupts so the timebase is disabled for the
+	   shortest possible time */
+	local_irq_save(flags);
+	pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 4);
+	pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, core99_tb_gpio, 0);
+	mb();
+	pri_tb_hi = get_tbu();
+	pri_tb_lo = get_tbl();
+	pri_tb_stamp = last_jiffy_stamp(smp_processor_id());
+	mb();
+
+	/* tell the secondary we're ready */
+	sec_tb_reset = 2;
+	mb();
+
+	/* wait for the secondary to have taken it */
+	/* note: can't use udelay here, since it needs the timebase running */
+	for (t = 10000000; t > 0 && sec_tb_reset; --t)
+		barrier();
+	if (sec_tb_reset)
+		/* XXX BUG_ON here? */
+		printk(KERN_WARNING "Timeout waiting sync(2) on second CPU\n");
+
+	/* Now, restart the timebase by leaving the GPIO to an open collector */
+       	pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 0);
+        pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, core99_tb_gpio, 0);
+	local_irq_restore(flags);
+}
+
+/* not __init, called in sleep/wakeup code */
+void smp_core99_take_timebase(void)
+{
+	unsigned long flags;
+
+	/* tell the primary we're here */
+	sec_tb_reset = 1;
+	mb();
+
+	/* wait for the primary to set pri_tb_hi/lo */
+	while (sec_tb_reset < 2)
+		mb();
+
+	/* set our stuff the same as the primary */
+	local_irq_save(flags);
+	set_dec(1);
+	set_tb(pri_tb_hi, pri_tb_lo);
+	last_jiffy_stamp(smp_processor_id()) = pri_tb_stamp;
+	mb();
+
+	/* tell the primary we're done */
+       	sec_tb_reset = 0;
+	mb();
+	local_irq_restore(flags);
+}
+
+/* L2 and L3 cache settings to pass from CPU0 to CPU1 on G4 cpus */
+volatile static long int core99_l2_cache;
+volatile static long int core99_l3_cache;
+
+static void __devinit core99_init_caches(int cpu)
+{
+	if (!cpu_has_feature(CPU_FTR_L2CR))
+		return;
+
+	if (cpu == 0) {
+		core99_l2_cache = _get_L2CR();
+		printk("CPU0: L2CR is %lx\n", core99_l2_cache);
+	} else {
+		printk("CPU%d: L2CR was %lx\n", cpu, _get_L2CR());
+		_set_L2CR(0);
+		_set_L2CR(core99_l2_cache);
+		printk("CPU%d: L2CR set to %lx\n", cpu, core99_l2_cache);
+	}
+
+	if (!cpu_has_feature(CPU_FTR_L3CR))
+		return;
+
+	if (cpu == 0){
+		core99_l3_cache = _get_L3CR();
+		printk("CPU0: L3CR is %lx\n", core99_l3_cache);
+	} else {
+		printk("CPU%d: L3CR was %lx\n", cpu, _get_L3CR());
+		_set_L3CR(0);
+		_set_L3CR(core99_l3_cache);
+		printk("CPU%d: L3CR set to %lx\n", cpu, core99_l3_cache);
+	}
+}
+
+static void __init smp_core99_setup(int ncpus)
+{
+	struct device_node *cpu;
+	u32 *tbprop = NULL;
+	int i;
+
+	core99_tb_gpio = KL_GPIO_TB_ENABLE;	/* default value */
+	cpu = of_find_node_by_type(NULL, "cpu");
+	if (cpu != NULL) {
+		tbprop = (u32 *)get_property(cpu, "timebase-enable", NULL);
+		if (tbprop)
+			core99_tb_gpio = *tbprop;
+		of_node_put(cpu);
+	}
+
+	/* XXX should get this from reg properties */
+	for (i = 1; i < ncpus; ++i)
+		smp_hw_index[i] = i;
+	powersave_nap = 0;
+}
+#endif
+
+static int __init smp_core99_probe(void)
+{
+	struct device_node *cpus;
+	int ncpus = 0;
+
+	if (ppc_md.progress) ppc_md.progress("smp_core99_probe", 0x345);
+
+	/* Count CPUs in the device-tree */
+       	for (cpus = NULL; (cpus = of_find_node_by_type(cpus, "cpu")) != NULL;)
+	       	++ncpus;
+
+	printk(KERN_INFO "PowerMac SMP probe found %d cpus\n", ncpus);
+
+	/* Nothing more to do if less than 2 of them */
+	if (ncpus <= 1)
+		return 1;
+
+	smp_core99_setup(ncpus);
+	mpic_request_ipis();
+	core99_init_caches(0);
+
+	return ncpus;
+}
+
+static void __devinit smp_core99_kick_cpu(int nr)
+{
+	unsigned int save_vector;
+	unsigned long new_vector;
+	unsigned long flags;
+	volatile unsigned int *vector
+		 = ((volatile unsigned int *)(KERNELBASE+0x100));
+
+	if (nr < 0 || nr > 3)
+		return;
+	if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu", 0x346);
+
+	local_irq_save(flags);
+	local_irq_disable();
+
+	/* Save reset vector */
+	save_vector = *vector;
+
+	/* Setup fake reset vector that does	
+	 *   b __secondary_start_pmac_0 + nr*8 - KERNELBASE
+	 */
+	new_vector = (unsigned long) __secondary_start_pmac_0 + nr * 8;
+	*vector = 0x48000002 + new_vector - KERNELBASE;
+
+	/* flush data cache and inval instruction cache */
+	flush_icache_range((unsigned long) vector, (unsigned long) vector + 4);
+
+	/* Put some life in our friend */
+	pmac_call_feature(PMAC_FTR_RESET_CPU, NULL, nr, 0);
+
+	/* FIXME: We wait a bit for the CPU to take the exception, I should
+	 * instead wait for the entry code to set something for me. Well,
+	 * ideally, all that crap will be done in prom.c and the CPU left
+	 * in a RAM-based wait loop like CHRP.
+	 */
+	mdelay(1);
+
+	/* Restore our exception vector */
+	*vector = save_vector;
+	flush_icache_range((unsigned long) vector, (unsigned long) vector + 4);
+
+	local_irq_restore(flags);
+	if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu done", 0x347);
+}
+
+static void __devinit smp_core99_setup_cpu(int cpu_nr)
+{
+	/* Setup L2/L3 */
+	if (cpu_nr != 0)
+		core99_init_caches(cpu_nr);
+
+	/* Setup openpic */
+	mpic_setup_this_cpu();
+
+	if (cpu_nr == 0) {
+#ifdef CONFIG_POWER4
+		extern void g5_phy_disable_cpu1(void);
+
+		/* If we didn't start the second CPU, we must take
+		 * it off the bus
+		 */
+		if (machine_is_compatible("MacRISC4") &&
+		    num_online_cpus() < 2)		
+			g5_phy_disable_cpu1();
+#endif /* CONFIG_POWER4 */
+		if (ppc_md.progress) ppc_md.progress("core99_setup_cpu 0 done", 0x349);
+	}
+}
+
+
+#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC32)
+
+int smp_core99_cpu_disable(void)
+{
+	cpu_clear(smp_processor_id(), cpu_online_map);
+
+	/* XXX reset cpu affinity here */
+	mpic_cpu_set_priority(0xf);
+	asm volatile("mtdec %0" : : "r" (0x7fffffff));
+	mb();
+	udelay(20);
+	asm volatile("mtdec %0" : : "r" (0x7fffffff));
+	return 0;
+}
+
+extern void low_cpu_die(void) __attribute__((noreturn)); /* in sleep.S */
+static int cpu_dead[NR_CPUS];
+
+void cpu_die(void)
+{
+	local_irq_disable();
+	cpu_dead[smp_processor_id()] = 1;
+	mb();
+	low_cpu_die();
+}
+
+void smp_core99_cpu_die(unsigned int cpu)
+{
+	int timeout;
+
+	timeout = 1000;
+	while (!cpu_dead[cpu]) {
+		if (--timeout == 0) {
+			printk("CPU %u refused to die!\n", cpu);
+			break;
+		}
+		msleep(1);
+	}
+	cpu_dead[cpu] = 0;
+}
+
+#endif
+
+/* Core99 Macs (dual G4s and G5s) */
+struct smp_ops_t core99_smp_ops = {
+	.message_pass	= smp_mpic_message_pass,
+	.probe		= smp_core99_probe,
+	.kick_cpu	= smp_core99_kick_cpu,
+	.setup_cpu	= smp_core99_setup_cpu,
+	.give_timebase	= smp_core99_give_timebase,
+	.take_timebase	= smp_core99_take_timebase,
+#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC32)
+	.cpu_disable	= smp_core99_cpu_disable,
+	.cpu_die	= smp_core99_cpu_die,
+#endif
+};
diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c
new file mode 100644
index 000000000000..feb0a94e7819
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/time.c
@@ -0,0 +1,361 @@
+/*
+ * Support for periodic interrupts (100 per second) and for getting
+ * the current time from the RTC on Power Macintoshes.
+ *
+ * We use the decrementer register for our periodic interrupts.
+ *
+ * Paul Mackerras	August 1996.
+ * Copyright (C) 1996 Paul Mackerras.
+ * Copyright (C) 2003-2005 Benjamin Herrenschmidt.
+ *
+ */
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/adb.h>
+#include <linux/cuda.h>
+#include <linux/pmu.h>
+#include <linux/interrupt.h>
+#include <linux/hardirq.h>
+#include <linux/rtc.h>
+
+#include <asm/sections.h>
+#include <asm/prom.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/machdep.h>
+#include <asm/time.h>
+#include <asm/nvram.h>
+#include <asm/smu.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+/* Apparently the RTC stores seconds since 1 Jan 1904 */
+#define RTC_OFFSET	2082844800
+
+/*
+ * Calibrate the decrementer frequency with the VIA timer 1.
+ */
+#define VIA_TIMER_FREQ_6	4700000	/* time 1 frequency * 6 */
+
+/* VIA registers */
+#define RS		0x200		/* skip between registers */
+#define T1CL		(4*RS)		/* Timer 1 ctr/latch (low 8 bits) */
+#define T1CH		(5*RS)		/* Timer 1 counter (high 8 bits) */
+#define T1LL		(6*RS)		/* Timer 1 latch (low 8 bits) */
+#define T1LH		(7*RS)		/* Timer 1 latch (high 8 bits) */
+#define ACR		(11*RS)		/* Auxiliary control register */
+#define IFR		(13*RS)		/* Interrupt flag register */
+
+/* Bits in ACR */
+#define T1MODE		0xc0		/* Timer 1 mode */
+#define T1MODE_CONT	0x40		/*  continuous interrupts */
+
+/* Bits in IFR and IER */
+#define T1_INT		0x40		/* Timer 1 interrupt */
+
+long __init pmac_time_init(void)
+{
+	s32 delta = 0;
+#ifdef CONFIG_NVRAM
+	int dst;
+	
+	delta = ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x9)) << 16;
+	delta |= ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0xa)) << 8;
+	delta |= pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0xb);
+	if (delta & 0x00800000UL)
+		delta |= 0xFF000000UL;
+	dst = ((pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x8) & 0x80) != 0);
+	printk("GMT Delta read from XPRAM: %d minutes, DST: %s\n", delta/60,
+		dst ? "on" : "off");
+#endif
+	return delta;
+}
+
+static void to_rtc_time(unsigned long now, struct rtc_time *tm)
+{
+	to_tm(now, tm);
+	tm->tm_year -= 1900;
+	tm->tm_mon -= 1;
+}
+
+static unsigned long from_rtc_time(struct rtc_time *tm)
+{
+	return mktime(tm->tm_year+1900, tm->tm_mon+1, tm->tm_mday,
+		      tm->tm_hour, tm->tm_min, tm->tm_sec);
+}
+
+#ifdef CONFIG_ADB_CUDA
+static unsigned long cuda_get_time(void)
+{
+	struct adb_request req;
+	unsigned int now;
+
+	if (cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_GET_TIME) < 0)
+		return 0;
+	while (!req.complete)
+		cuda_poll();
+	if (req.reply_len != 7)
+		printk(KERN_ERR "cuda_get_time: got %d byte reply\n",
+		       req.reply_len);
+	now = (req.reply[3] << 24) + (req.reply[4] << 16)
+		+ (req.reply[5] << 8) + req.reply[6];
+	return ((unsigned long)now) - RTC_OFFSET;
+}
+
+#define cuda_get_rtc_time(tm)	to_rtc_time(cuda_get_time(), (tm))
+
+static int cuda_set_rtc_time(struct rtc_time *tm)
+{
+	unsigned int nowtime;
+	struct adb_request req;
+
+	nowtime = from_rtc_time(tm) + RTC_OFFSET;
+	if (cuda_request(&req, NULL, 6, CUDA_PACKET, CUDA_SET_TIME,
+			 nowtime >> 24, nowtime >> 16, nowtime >> 8,
+			 nowtime) < 0)
+		return -ENXIO;
+	while (!req.complete)
+		cuda_poll();
+	if ((req.reply_len != 3) && (req.reply_len != 7))
+		printk(KERN_ERR "cuda_set_rtc_time: got %d byte reply\n",
+		       req.reply_len);
+	return 0;
+}
+
+#else
+#define cuda_get_time()		0
+#define cuda_get_rtc_time(tm)
+#define cuda_set_rtc_time(tm)	0
+#endif
+
+#ifdef CONFIG_ADB_PMU
+static unsigned long pmu_get_time(void)
+{
+	struct adb_request req;
+	unsigned int now;
+
+	if (pmu_request(&req, NULL, 1, PMU_READ_RTC) < 0)
+		return 0;
+	pmu_wait_complete(&req);
+	if (req.reply_len != 4)
+		printk(KERN_ERR "pmu_get_time: got %d byte reply from PMU\n",
+		       req.reply_len);
+	now = (req.reply[0] << 24) + (req.reply[1] << 16)
+		+ (req.reply[2] << 8) + req.reply[3];
+	return ((unsigned long)now) - RTC_OFFSET;
+}
+
+#define pmu_get_rtc_time(tm)	to_rtc_time(pmu_get_time(), (tm))
+
+static int pmu_set_rtc_time(struct rtc_time *tm)
+{
+	unsigned int nowtime;
+	struct adb_request req;
+
+	nowtime = from_rtc_time(tm) + RTC_OFFSET;
+	if (pmu_request(&req, NULL, 5, PMU_SET_RTC, nowtime >> 24,
+			nowtime >> 16, nowtime >> 8, nowtime) < 0)
+		return -ENXIO;
+	pmu_wait_complete(&req);
+	if (req.reply_len != 0)
+		printk(KERN_ERR "pmu_set_rtc_time: %d byte reply from PMU\n",
+		       req.reply_len);
+	return 0;
+}
+
+#else
+#define pmu_get_time()		0
+#define pmu_get_rtc_time(tm)
+#define pmu_set_rtc_time(tm)	0
+#endif
+
+#ifdef CONFIG_PMAC_SMU
+static unsigned long smu_get_time(void)
+{
+	struct rtc_time tm;
+
+	if (smu_get_rtc_time(&tm, 1))
+		return 0;
+	return from_rtc_time(&tm);
+}
+
+#else
+#define smu_get_time()			0
+#define smu_get_rtc_time(tm, spin)
+#define smu_set_rtc_time(tm, spin)	0
+#endif
+
+/* Can't be __init, it's called when suspending and resuming */
+unsigned long pmac_get_boot_time(void)
+{
+	/* Get the time from the RTC, used only at boot time */
+	switch (sys_ctrler) {
+	case SYS_CTRLER_CUDA:
+		return cuda_get_time();
+	case SYS_CTRLER_PMU:
+		return pmu_get_time();
+	case SYS_CTRLER_SMU:
+		return smu_get_time();
+	default:
+		return 0;
+	}
+}
+
+void pmac_get_rtc_time(struct rtc_time *tm)
+{
+	/* Get the time from the RTC, used only at boot time */
+	switch (sys_ctrler) {
+	case SYS_CTRLER_CUDA:
+		cuda_get_rtc_time(tm);
+		break;
+	case SYS_CTRLER_PMU:
+		pmu_get_rtc_time(tm);
+		break;
+	case SYS_CTRLER_SMU:
+		smu_get_rtc_time(tm, 1);
+		break;
+	default:
+		;
+	}
+}
+
+int pmac_set_rtc_time(struct rtc_time *tm)
+{
+	switch (sys_ctrler) {
+	case SYS_CTRLER_CUDA:
+		return cuda_set_rtc_time(tm);
+	case SYS_CTRLER_PMU:
+		return pmu_set_rtc_time(tm);
+	case SYS_CTRLER_SMU:
+		return smu_set_rtc_time(tm, 1);
+	default:
+		return -ENODEV;
+	}
+}
+
+#ifdef CONFIG_PPC32
+/*
+ * Calibrate the decrementer register using VIA timer 1.
+ * This is used both on powermacs and CHRP machines.
+ */
+int __init via_calibrate_decr(void)
+{
+	struct device_node *vias;
+	volatile unsigned char __iomem *via;
+	int count = VIA_TIMER_FREQ_6 / 100;
+	unsigned int dstart, dend;
+
+	vias = find_devices("via-cuda");
+	if (vias == 0)
+		vias = find_devices("via-pmu");
+	if (vias == 0)
+		vias = find_devices("via");
+	if (vias == 0 || vias->n_addrs == 0)
+		return 0;
+	via = ioremap(vias->addrs[0].address, vias->addrs[0].size);
+
+	/* set timer 1 for continuous interrupts */
+	out_8(&via[ACR], (via[ACR] & ~T1MODE) | T1MODE_CONT);
+	/* set the counter to a small value */
+	out_8(&via[T1CH], 2);
+	/* set the latch to `count' */
+	out_8(&via[T1LL], count);
+	out_8(&via[T1LH], count >> 8);
+	/* wait until it hits 0 */
+	while ((in_8(&via[IFR]) & T1_INT) == 0)
+		;
+	dstart = get_dec();
+	/* clear the interrupt & wait until it hits 0 again */
+	in_8(&via[T1CL]);
+	while ((in_8(&via[IFR]) & T1_INT) == 0)
+		;
+	dend = get_dec();
+
+	ppc_tb_freq = (dstart - dend) * 100 / 6;
+
+	iounmap(via);
+	
+	return 1;
+}
+#endif
+
+#ifdef CONFIG_PM
+/*
+ * Reset the time after a sleep.
+ */
+static int
+time_sleep_notify(struct pmu_sleep_notifier *self, int when)
+{
+	static unsigned long time_diff;
+	unsigned long flags;
+	unsigned long seq;
+	struct timespec tv;
+
+	switch (when) {
+	case PBOOK_SLEEP_NOW:
+		do {
+			seq = read_seqbegin_irqsave(&xtime_lock, flags);
+			time_diff = xtime.tv_sec - pmac_get_boot_time();
+		} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
+		break;
+	case PBOOK_WAKE:
+		tv.tv_sec = pmac_get_boot_time() + time_diff;
+		tv.tv_nsec = 0;
+		do_settimeofday(&tv);
+		break;
+	}
+	return PBOOK_SLEEP_OK;
+}
+
+static struct pmu_sleep_notifier time_sleep_notifier = {
+	time_sleep_notify, SLEEP_LEVEL_MISC,
+};
+#endif /* CONFIG_PM */
+
+/*
+ * Query the OF and get the decr frequency.
+ */
+void __init pmac_calibrate_decr(void)
+{
+#ifdef CONFIG_PM
+	/* XXX why here? */
+	pmu_register_sleep_notifier(&time_sleep_notifier);
+#endif /* CONFIG_PM */
+
+	generic_calibrate_decr();
+
+#ifdef CONFIG_PPC32
+	/* We assume MacRISC2 machines have correct device-tree
+	 * calibration. That's better since the VIA itself seems
+	 * to be slightly off. --BenH
+	 */
+	if (!machine_is_compatible("MacRISC2") &&
+	    !machine_is_compatible("MacRISC3") &&
+	    !machine_is_compatible("MacRISC4"))
+		if (via_calibrate_decr())
+			return;
+
+	/* Special case: QuickSilver G4s seem to have a badly calibrated
+	 * timebase-frequency in OF, VIA is much better on these. We should
+	 * probably implement calibration based on the KL timer on these
+	 * machines anyway... -BenH
+	 */
+	if (machine_is_compatible("PowerMac3,5"))
+		if (via_calibrate_decr())
+			return;
+#endif
+}
diff --git a/arch/powerpc/platforms/prep/Kconfig b/arch/powerpc/platforms/prep/Kconfig
new file mode 100644
index 000000000000..673ac47a1626
--- /dev/null
+++ b/arch/powerpc/platforms/prep/Kconfig
@@ -0,0 +1,22 @@
+
+config PREP_RESIDUAL
+	bool "Support for PReP Residual Data"
+	depends on PPC_PREP
+	help
+	  Some PReP systems have residual data passed to the kernel by the
+	  firmware.  This allows detection of memory size, devices present and
+	  other useful pieces of information.  Sometimes this information is
+	  not present or incorrect, in which case it could lead to the machine 
+	  behaving incorrectly.  If this happens, either disable PREP_RESIDUAL
+	  or pass the 'noresidual' option to the kernel.
+
+	  If you are running a PReP system, say Y here, otherwise say N.
+
+config PROC_PREPRESIDUAL
+	bool "Support for reading of PReP Residual Data in /proc"
+	depends on PREP_RESIDUAL && PROC_FS
+	help
+	  Enabling this option will create a /proc/residual file which allows
+	  you to get at the residual data on PReP systems.  You will need a tool
+	  (lsresidual) to parse it.  If you aren't on a PReP system, you don't
+	  want this.
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
new file mode 100644
index 000000000000..e3fc3407bb1f
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -0,0 +1,33 @@
+
+config PPC_SPLPAR
+	depends on PPC_PSERIES
+	bool "Support for shared-processor logical partitions"
+	default n
+	help
+	  Enabling this option will make the kernel run more efficiently
+	  on logically-partitioned pSeries systems which use shared
+	  processors, that is, which share physical processors between
+	  two or more partitions.
+
+config HMT
+	bool "Hardware multithreading"
+	depends on SMP && PPC_PSERIES && BROKEN
+	help
+	  This option enables hardware multithreading on RS64 cpus.
+	  pSeries systems p620 and p660 have such a cpu type.
+
+config EEH
+	bool "PCI Extended Error Handling (EEH)" if EMBEDDED
+	depends on PPC_PSERIES
+	default y if !EMBEDDED
+
+config SCANLOG
+	tristate "Scanlog dump interface"
+	depends on RTAS_PROC && PPC_PSERIES
+
+config LPARCFG
+	tristate "LPAR Configuration Data"
+	depends on PPC_PSERIES || PPC_ISERIES
+	help
+	Provide system capacity information via human readable
+	<key word>=<value> pairs through a /proc/ppc64/lparcfg interface.
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
new file mode 100644
index 000000000000..06d5ef501218
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -0,0 +1,10 @@
+obj-y			:= pci.o lpar.o hvCall.o nvram.o reconfig.o \
+			   setup.o iommu.o ras.o rtasd.o
+obj-$(CONFIG_SMP)	+= smp.o
+obj-$(CONFIG_IBMVIO)	+= vio.o
+obj-$(CONFIG_XICS)	+= xics.o
+obj-$(CONFIG_SCANLOG)	+= scanlog.o
+obj-$(CONFIG_EEH)	+= eeh.o eeh_event.o
+
+obj-$(CONFIG_HVC_CONSOLE)	+= hvconsole.o
+obj-$(CONFIG_HVCS)		+= hvcserver.o
diff --git a/arch/ppc64/kernel/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index ba93fd731222..c8d2a40dc5b4 100644
--- a/arch/ppc64/kernel/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -1,39 +1,37 @@
 /*
  * eeh.c
  * Copyright (C) 2001 Dave Engebretsen & Todd Inglett IBM Corporation
- * 
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- * 
+ *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- * 
+ *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
-#include <linux/bootmem.h>
+#include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/list.h>
-#include <linux/mm.h>
-#include <linux/notifier.h>
 #include <linux/pci.h>
 #include <linux/proc_fs.h>
 #include <linux/rbtree.h>
 #include <linux/seq_file.h>
 #include <linux/spinlock.h>
+#include <asm/atomic.h>
 #include <asm/eeh.h>
+#include <asm/eeh_event.h>
 #include <asm/io.h>
 #include <asm/machdep.h>
+#include <asm/ppc-pci.h>
 #include <asm/rtas.h>
-#include <asm/atomic.h>
-#include <asm/systemcfg.h>
-#include "pci.h"
 
 #undef DEBUG
 
@@ -49,8 +47,8 @@
  *  were "empty": all reads return 0xff's and all writes are silently
  *  ignored.  EEH slot isolation events can be triggered by parity
  *  errors on the address or data busses (e.g. during posted writes),
- *  which in turn might be caused by dust, vibration, humidity,
- *  radioactivity or plain-old failed hardware.
+ *  which in turn might be caused by low voltage on the bus, dust,
+ *  vibration, humidity, radioactivity or plain-old failed hardware.
  *
  *  Note, however, that one of the leading causes of EEH slot
  *  freeze events are buggy device drivers, buggy device microcode,
@@ -71,26 +69,15 @@
  *  and sent out for processing.
  */
 
-/** Bus Unit ID macros; get low and hi 32-bits of the 64-bit BUID */
-#define BUID_HI(buid) ((buid) >> 32)
-#define BUID_LO(buid) ((buid) & 0xffffffff)
-
-/* EEH event workqueue setup. */
-static DEFINE_SPINLOCK(eeh_eventlist_lock);
-LIST_HEAD(eeh_eventlist);
-static void eeh_event_handler(void *);
-DECLARE_WORK(eeh_event_wq, eeh_event_handler, NULL);
-
-static struct notifier_block *eeh_notifier_chain;
-
-/*
- * If a device driver keeps reading an MMIO register in an interrupt
+/* If a device driver keeps reading an MMIO register in an interrupt
  * handler after a slot isolation event has occurred, we assume it
  * is broken and panic.  This sets the threshold for how many read
  * attempts we allow before panicking.
  */
-#define EEH_MAX_FAILS	1000
-static atomic_t eeh_fail_count;
+#define EEH_MAX_FAILS	100000
+
+/* Misc forward declaraions */
+static void eeh_save_bars(struct pci_dev * pdev, struct pci_dn *pdn);
 
 /* RTAS tokens */
 static int ibm_set_eeh_option;
@@ -99,7 +86,11 @@ static int ibm_read_slot_reset_state;
 static int ibm_read_slot_reset_state2;
 static int ibm_slot_error_detail;
 
-static int eeh_subsystem_enabled;
+int eeh_subsystem_enabled;
+EXPORT_SYMBOL(eeh_subsystem_enabled);
+
+/* Lock to avoid races due to multiple reports of an error */
+static DEFINE_SPINLOCK(confirm_error_lock);
 
 /* Buffer for reporting slot-error-detail rtas calls */
 static unsigned char slot_errbuf[RTAS_ERROR_LOG_MAX];
@@ -107,6 +98,10 @@ static DEFINE_SPINLOCK(slot_errbuf_lock);
 static int eeh_error_buf_size;
 
 /* System monitoring statistics */
+static DEFINE_PER_CPU(unsigned long, no_device);
+static DEFINE_PER_CPU(unsigned long, no_dn);
+static DEFINE_PER_CPU(unsigned long, no_cfg_addr);
+static DEFINE_PER_CPU(unsigned long, ignored_check);
 static DEFINE_PER_CPU(unsigned long, total_mmio_ffs);
 static DEFINE_PER_CPU(unsigned long, false_positives);
 static DEFINE_PER_CPU(unsigned long, ignored_failures);
@@ -224,9 +219,9 @@ pci_addr_cache_insert(struct pci_dev *dev, unsigned long alo,
 	while (*p) {
 		parent = *p;
 		piar = rb_entry(parent, struct pci_io_addr_range, rb_node);
-		if (alo < piar->addr_lo) {
+		if (ahi < piar->addr_lo) {
 			p = &parent->rb_left;
-		} else if (ahi > piar->addr_hi) {
+		} else if (alo > piar->addr_hi) {
 			p = &parent->rb_right;
 		} else {
 			if (dev != piar->pcidev ||
@@ -245,6 +240,11 @@ pci_addr_cache_insert(struct pci_dev *dev, unsigned long alo,
 	piar->pcidev = dev;
 	piar->flags = flags;
 
+#ifdef DEBUG
+	printk(KERN_DEBUG "PIAR: insert range=[%lx:%lx] dev=%s\n",
+	                  alo, ahi, pci_name (dev));
+#endif
+
 	rb_link_node(&piar->rb_node, parent, p);
 	rb_insert_color(&piar->rb_node, &pci_io_addr_cache_root.rb_root);
 
@@ -260,18 +260,17 @@ static void __pci_addr_cache_insert_device(struct pci_dev *dev)
 
 	dn = pci_device_to_OF_node(dev);
 	if (!dn) {
-		printk(KERN_WARNING "PCI: no pci dn found for dev=%s\n",
-			pci_name(dev));
+		printk(KERN_WARNING "PCI: no pci dn found for dev=%s\n", pci_name(dev));
 		return;
 	}
 
 	/* Skip any devices for which EEH is not enabled. */
-	pdn = dn->data;
+	pdn = PCI_DN(dn);
 	if (!(pdn->eeh_mode & EEH_MODE_SUPPORTED) ||
 	    pdn->eeh_mode & EEH_MODE_NOCHECK) {
 #ifdef DEBUG
-		printk(KERN_INFO "PCI: skip building address cache for=%s\n",
-		       pci_name(dev));
+		printk(KERN_INFO "PCI: skip building address cache for=%s - %s\n",
+		       pci_name(dev), pdn->node->full_name);
 #endif
 		return;
 	}
@@ -307,7 +306,7 @@ static void __pci_addr_cache_insert_device(struct pci_dev *dev)
  * we maintain a cache of devices that can be quickly searched.
  * This routine adds a device to that cache.
  */
-void pci_addr_cache_insert_device(struct pci_dev *dev)
+static void pci_addr_cache_insert_device(struct pci_dev *dev)
 {
 	unsigned long flags;
 
@@ -350,7 +349,7 @@ restart:
  * the tree multiple times (once per resource).
  * But so what; device removal doesn't need to be that fast.
  */
-void pci_addr_cache_remove_device(struct pci_dev *dev)
+static void pci_addr_cache_remove_device(struct pci_dev *dev)
 {
 	unsigned long flags;
 
@@ -370,8 +369,12 @@ void pci_addr_cache_remove_device(struct pci_dev *dev)
  */
 void __init pci_addr_cache_build(void)
 {
+	struct device_node *dn;
 	struct pci_dev *dev = NULL;
 
+	if (!eeh_subsystem_enabled)
+		return;
+
 	spin_lock_init(&pci_io_addr_cache_root.piar_lock);
 
 	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
@@ -380,6 +383,10 @@ void __init pci_addr_cache_build(void)
 			continue;
 		}
 		pci_addr_cache_insert_device(dev);
+
+		/* Save the BAR's; firmware doesn't restore these after EEH reset */
+		dn = pci_device_to_OF_node(dev);
+		eeh_save_bars(dev, PCI_DN(dn));
 	}
 
 #ifdef DEBUG
@@ -391,22 +398,26 @@ void __init pci_addr_cache_build(void)
 /* --------------------------------------------------------------- */
 /* Above lies the PCI Address Cache. Below lies the EEH event infrastructure */
 
-/**
- * eeh_register_notifier - Register to find out about EEH events.
- * @nb: notifier block to callback on events
- */
-int eeh_register_notifier(struct notifier_block *nb)
+void eeh_slot_error_detail (struct pci_dn *pdn, int severity)
 {
-	return notifier_chain_register(&eeh_notifier_chain, nb);
-}
+	unsigned long flags;
+	int rc;
 
-/**
- * eeh_unregister_notifier - Unregister to an EEH event notifier.
- * @nb: notifier block to callback on events
- */
-int eeh_unregister_notifier(struct notifier_block *nb)
-{
-	return notifier_chain_unregister(&eeh_notifier_chain, nb);
+	/* Log the error with the rtas logger */
+	spin_lock_irqsave(&slot_errbuf_lock, flags);
+	memset(slot_errbuf, 0, eeh_error_buf_size);
+
+	rc = rtas_call(ibm_slot_error_detail,
+	               8, 1, NULL, pdn->eeh_config_addr,
+	               BUID_HI(pdn->phb->buid),
+	               BUID_LO(pdn->phb->buid), NULL, 0,
+	               virt_to_phys(slot_errbuf),
+	               eeh_error_buf_size,
+	               severity);
+
+	if (rc == 0)
+		log_error(slot_errbuf, ERR_TYPE_RTAS_LOG, 0);
+	spin_unlock_irqrestore(&slot_errbuf_lock, flags);
 }
 
 /**
@@ -414,16 +425,16 @@ int eeh_unregister_notifier(struct notifier_block *nb)
  * @dn: device node to read
  * @rets: array to return results in
  */
-static int read_slot_reset_state(struct device_node *dn, int rets[])
+static int read_slot_reset_state(struct pci_dn *pdn, int rets[])
 {
 	int token, outputs;
-	struct pci_dn *pdn = dn->data;
 
 	if (ibm_read_slot_reset_state2 != RTAS_UNKNOWN_SERVICE) {
 		token = ibm_read_slot_reset_state2;
 		outputs = 4;
 	} else {
 		token = ibm_read_slot_reset_state;
+		rets[2] = 0; /* fake PE Unavailable info */
 		outputs = 3;
 	}
 
@@ -432,87 +443,84 @@ static int read_slot_reset_state(struct device_node *dn, int rets[])
 }
 
 /**
- * eeh_panic - call panic() for an eeh event that cannot be handled.
- * The philosophy of this routine is that it is better to panic and
- * halt the OS than it is to risk possible data corruption by
- * oblivious device drivers that don't know better.
- *
- * @dev pci device that had an eeh event
- * @reset_state current reset state of the device slot
+ * eeh_token_to_phys - convert EEH address token to phys address
+ * @token i/o token, should be address in the form 0xA....
  */
-static void eeh_panic(struct pci_dev *dev, int reset_state)
+static inline unsigned long eeh_token_to_phys(unsigned long token)
 {
-	/*
-	 * XXX We should create a separate sysctl for this.
-	 *
-	 * Since the panic_on_oops sysctl is used to halt the system
-	 * in light of potential corruption, we can use it here.
-	 */
-	if (panic_on_oops)
-		panic("EEH: MMIO failure (%d) on device:%s\n", reset_state,
-		      pci_name(dev));
-	else {
-		__get_cpu_var(ignored_failures)++;
-		printk(KERN_INFO "EEH: Ignored MMIO failure (%d) on device:%s\n",
-		       reset_state, pci_name(dev));
-	}
+	pte_t *ptep;
+	unsigned long pa;
+
+	ptep = find_linux_pte(init_mm.pgd, token);
+	if (!ptep)
+		return token;
+	pa = pte_pfn(*ptep) << PAGE_SHIFT;
+
+	return pa | (token & (PAGE_SIZE-1));
 }
 
-/**
- * eeh_event_handler - dispatch EEH events.  The detection of a frozen
- * slot can occur inside an interrupt, where it can be hard to do
- * anything about it.  The goal of this routine is to pull these
- * detection events out of the context of the interrupt handler, and
- * re-dispatch them for processing at a later time in a normal context.
- *
- * @dummy - unused
+/** 
+ * Return the "partitionable endpoint" (pe) under which this device lies
  */
-static void eeh_event_handler(void *dummy)
+static struct device_node * find_device_pe(struct device_node *dn)
 {
-	unsigned long flags;
-	struct eeh_event	*event;
-
-	while (1) {
-		spin_lock_irqsave(&eeh_eventlist_lock, flags);
-		event = NULL;
-		if (!list_empty(&eeh_eventlist)) {
-			event = list_entry(eeh_eventlist.next, struct eeh_event, list);
-			list_del(&event->list);
-		}
-		spin_unlock_irqrestore(&eeh_eventlist_lock, flags);
-		if (event == NULL)
-			break;
-
-		printk(KERN_INFO "EEH: MMIO failure (%d), notifiying device "
-		       "%s\n", event->reset_state,
-		       pci_name(event->dev));
+	while ((dn->parent) && PCI_DN(dn->parent) &&
+	      (PCI_DN(dn->parent)->eeh_mode & EEH_MODE_SUPPORTED)) {
+		dn = dn->parent;
+	}
+	return dn;
+}
 
-		atomic_set(&eeh_fail_count, 0);
-		notifier_call_chain (&eeh_notifier_chain,
-				     EEH_NOTIFY_FREEZE, event);
+/** Mark all devices that are peers of this device as failed.
+ *  Mark the device driver too, so that it can see the failure
+ *  immediately; this is critical, since some drivers poll
+ *  status registers in interrupts ... If a driver is polling,
+ *  and the slot is frozen, then the driver can deadlock in
+ *  an interrupt context, which is bad.
+ */
 
-		__get_cpu_var(slot_resets)++;
+static void __eeh_mark_slot (struct device_node *dn, int mode_flag)
+{
+	while (dn) {
+		if (PCI_DN(dn)) {
+			PCI_DN(dn)->eeh_mode |= mode_flag;
 
-		pci_dev_put(event->dev);
-		kfree(event);
+			if (dn->child)
+				__eeh_mark_slot (dn->child, mode_flag);
+		}
+		dn = dn->sibling;
 	}
 }
 
-/**
- * eeh_token_to_phys - convert EEH address token to phys address
- * @token i/o token, should be address in the form 0xE....
- */
-static inline unsigned long eeh_token_to_phys(unsigned long token)
+void eeh_mark_slot (struct device_node *dn, int mode_flag)
 {
-	pte_t *ptep;
-	unsigned long pa;
+	dn = find_device_pe (dn);
+	PCI_DN(dn)->eeh_mode |= mode_flag;
+	__eeh_mark_slot (dn->child, mode_flag);
+}
 
-	ptep = find_linux_pte(init_mm.pgd, token);
-	if (!ptep)
-		return token;
-	pa = pte_pfn(*ptep) << PAGE_SHIFT;
+static void __eeh_clear_slot (struct device_node *dn, int mode_flag)
+{
+	while (dn) {
+		if (PCI_DN(dn)) {
+			PCI_DN(dn)->eeh_mode &= ~mode_flag;
+			PCI_DN(dn)->eeh_check_count = 0;
+			if (dn->child)
+				__eeh_clear_slot (dn->child, mode_flag);
+		}
+		dn = dn->sibling;
+	}
+}
 
-	return pa | (token & (PAGE_SIZE-1));
+void eeh_clear_slot (struct device_node *dn, int mode_flag)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&confirm_error_lock, flags);
+	dn = find_device_pe (dn);
+	PCI_DN(dn)->eeh_mode &= ~mode_flag;
+	PCI_DN(dn)->eeh_check_count = 0;
+	__eeh_clear_slot (dn->child, mode_flag);
+	spin_unlock_irqrestore(&confirm_error_lock, flags);
 }
 
 /**
@@ -526,7 +534,7 @@ static inline unsigned long eeh_token_to_phys(unsigned long token)
  * will query firmware for the EEH status.
  *
  * Returns 0 if there has not been an EEH error; otherwise returns
- * a non-zero value and queues up a solt isolation event notification.
+ * a non-zero value and queues up a slot isolation event notification.
  *
  * It is safe to call this routine in an interrupt context.
  */
@@ -535,42 +543,59 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 	int ret;
 	int rets[3];
 	unsigned long flags;
-	int rc, reset_state;
-	struct eeh_event  *event;
 	struct pci_dn *pdn;
+	int rc = 0;
 
 	__get_cpu_var(total_mmio_ffs)++;
 
 	if (!eeh_subsystem_enabled)
 		return 0;
 
-	if (!dn)
+	if (!dn) {
+		__get_cpu_var(no_dn)++;
 		return 0;
-	pdn = dn->data;
+	}
+	pdn = PCI_DN(dn);
 
 	/* Access to IO BARs might get this far and still not want checking. */
-	if (!pdn->eeh_capable || !(pdn->eeh_mode & EEH_MODE_SUPPORTED) ||
+	if (!(pdn->eeh_mode & EEH_MODE_SUPPORTED) ||
 	    pdn->eeh_mode & EEH_MODE_NOCHECK) {
+		__get_cpu_var(ignored_check)++;
+#ifdef DEBUG
+		printk ("EEH:ignored check (%x) for %s %s\n", 
+		        pdn->eeh_mode, pci_name (dev), dn->full_name);
+#endif
 		return 0;
 	}
 
 	if (!pdn->eeh_config_addr) {
+		__get_cpu_var(no_cfg_addr)++;
 		return 0;
 	}
 
-	/*
-	 * If we already have a pending isolation event for this
-	 * slot, we know it's bad already, we don't need to check...
+	/* If we already have a pending isolation event for this
+	 * slot, we know it's bad already, we don't need to check.
+	 * Do this checking under a lock; as multiple PCI devices
+	 * in one slot might report errors simultaneously, and we
+	 * only want one error recovery routine running.
 	 */
+	spin_lock_irqsave(&confirm_error_lock, flags);
+	rc = 1;
 	if (pdn->eeh_mode & EEH_MODE_ISOLATED) {
-		atomic_inc(&eeh_fail_count);
-		if (atomic_read(&eeh_fail_count) >= EEH_MAX_FAILS) {
+		pdn->eeh_check_count ++;
+		if (pdn->eeh_check_count >= EEH_MAX_FAILS) {
+			printk (KERN_ERR "EEH: Device driver ignored %d bad reads, panicing\n",
+			        pdn->eeh_check_count);
+			dump_stack();
+			
 			/* re-read the slot reset state */
-			if (read_slot_reset_state(dn, rets) != 0)
+			if (read_slot_reset_state(pdn, rets) != 0)
 				rets[0] = -1;	/* reset state unknown */
-			eeh_panic(dev, rets[0]);
+
+			/* If we are here, then we hit an infinite loop. Stop. */
+			panic("EEH: MMIO halt (%d) on device:%s\n", rets[0], pci_name(dev));
 		}
-		return 0;
+		goto dn_unlock;
 	}
 
 	/*
@@ -580,66 +605,69 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 	 * function zero of a multi-function device.
 	 * In any case they must share a common PHB.
 	 */
-	ret = read_slot_reset_state(dn, rets);
-	if (!(ret == 0 && rets[1] == 1 && (rets[0] == 2 || rets[0] == 4))) {
+	ret = read_slot_reset_state(pdn, rets);
+
+	/* If the call to firmware failed, punt */
+	if (ret != 0) {
+		printk(KERN_WARNING "EEH: read_slot_reset_state() failed; rc=%d dn=%s\n",
+		       ret, dn->full_name);
 		__get_cpu_var(false_positives)++;
-		return 0;
+		rc = 0;
+		goto dn_unlock;
 	}
 
-	/* prevent repeated reports of this failure */
-	pdn->eeh_mode |= EEH_MODE_ISOLATED;
-
-	reset_state = rets[0];
-
-	spin_lock_irqsave(&slot_errbuf_lock, flags);
-	memset(slot_errbuf, 0, eeh_error_buf_size);
-
-	rc = rtas_call(ibm_slot_error_detail,
-	               8, 1, NULL, pdn->eeh_config_addr,
-	               BUID_HI(pdn->phb->buid),
-	               BUID_LO(pdn->phb->buid), NULL, 0,
-	               virt_to_phys(slot_errbuf),
-	               eeh_error_buf_size,
-	               1 /* Temporary Error */);
-
-	if (rc == 0)
-		log_error(slot_errbuf, ERR_TYPE_RTAS_LOG, 0);
-	spin_unlock_irqrestore(&slot_errbuf_lock, flags);
+	/* If EEH is not supported on this device, punt. */
+	if (rets[1] != 1) {
+		printk(KERN_WARNING "EEH: event on unsupported device, rc=%d dn=%s\n",
+		       ret, dn->full_name);
+		__get_cpu_var(false_positives)++;
+		rc = 0;
+		goto dn_unlock;
+	}
 
-	printk(KERN_INFO "EEH: MMIO failure (%d) on device: %s %s\n",
-	       rets[0], dn->name, dn->full_name);
-	event = kmalloc(sizeof(*event), GFP_ATOMIC);
-	if (event == NULL) {
-		eeh_panic(dev, reset_state);
-		return 1;
- 	}
+	/* If not the kind of error we know about, punt. */
+	if (rets[0] != 2 && rets[0] != 4 && rets[0] != 5) {
+		__get_cpu_var(false_positives)++;
+		rc = 0;
+		goto dn_unlock;
+	}
 
-	event->dev = dev;
-	event->dn = dn;
-	event->reset_state = reset_state;
+	/* Note that config-io to empty slots may fail;
+	 * we recognize empty because they don't have children. */
+	if ((rets[0] == 5) && (dn->child == NULL)) {
+		__get_cpu_var(false_positives)++;
+		rc = 0;
+		goto dn_unlock;
+	}
 
-	/* We may or may not be called in an interrupt context */
-	spin_lock_irqsave(&eeh_eventlist_lock, flags);
-	list_add(&event->list, &eeh_eventlist);
-	spin_unlock_irqrestore(&eeh_eventlist_lock, flags);
+	__get_cpu_var(slot_resets)++;
+ 
+	/* Avoid repeated reports of this failure, including problems
+	 * with other functions on this device, and functions under
+	 * bridges. */
+	eeh_mark_slot (dn, EEH_MODE_ISOLATED);
+	spin_unlock_irqrestore(&confirm_error_lock, flags);
 
+	eeh_send_failure_event (dn, dev, rets[0], rets[2]);
+	
 	/* Most EEH events are due to device driver bugs.  Having
 	 * a stack trace will help the device-driver authors figure
 	 * out what happened.  So print that out. */
-	dump_stack();
-	schedule_work(&eeh_event_wq);
+	if (rets[0] != 5) dump_stack();
+	return 1;
 
-	return 0;
+dn_unlock:
+	spin_unlock_irqrestore(&confirm_error_lock, flags);
+	return rc;
 }
 
-EXPORT_SYMBOL(eeh_dn_check_failure);
+EXPORT_SYMBOL_GPL(eeh_dn_check_failure);
 
 /**
  * eeh_check_failure - check if all 1's data is due to EEH slot freeze
  * @token i/o token, should be address in the form 0xA....
  * @val value, should be all 1's (XXX why do we need this arg??)
  *
- * Check for an eeh failure at the given token address.
  * Check for an EEH failure at the given token address.  Call this
  * routine if the result of a read was all 0xff's and you want to
  * find out if this is due to an EEH slot freeze event.  This routine
@@ -656,8 +684,10 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned lon
 	/* Finding the phys addr + pci device; this is pretty quick. */
 	addr = eeh_token_to_phys((unsigned long __force) token);
 	dev = pci_get_device_by_addr(addr);
-	if (!dev)
+	if (!dev) {
+		__get_cpu_var(no_device)++;
 		return val;
+	}
 
 	dn = pci_device_to_OF_node(dev);
 	eeh_dn_check_failure (dn, dev);
@@ -668,6 +698,217 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned lon
 
 EXPORT_SYMBOL(eeh_check_failure);
 
+/* ------------------------------------------------------------- */
+/* The code below deals with error recovery */
+
+/** Return negative value if a permanent error, else return
+ * a number of milliseconds to wait until the PCI slot is
+ * ready to be used.
+ */
+static int
+eeh_slot_availability(struct pci_dn *pdn)
+{
+	int rc;
+	int rets[3];
+
+	rc = read_slot_reset_state(pdn, rets);
+
+	if (rc) return rc;
+
+	if (rets[1] == 0) return -1;  /* EEH is not supported */
+	if (rets[0] == 0)  return 0;  /* Oll Korrect */
+	if (rets[0] == 5) {
+		if (rets[2] == 0) return -1; /* permanently unavailable */
+		return rets[2]; /* number of millisecs to wait */
+	}
+	return -1;
+}
+
+/** rtas_pci_slot_reset raises/lowers the pci #RST line
+ *  state: 1/0 to raise/lower the #RST
+ *
+ * Clear the EEH-frozen condition on a slot.  This routine
+ * asserts the PCI #RST line if the 'state' argument is '1',
+ * and drops the #RST line if 'state is '0'.  This routine is
+ * safe to call in an interrupt context.
+ *
+ */
+
+static void
+rtas_pci_slot_reset(struct pci_dn *pdn, int state)
+{
+	int rc;
+
+	BUG_ON (pdn==NULL); 
+
+	if (!pdn->phb) {
+		printk (KERN_WARNING "EEH: in slot reset, device node %s has no phb\n",
+		        pdn->node->full_name);
+		return;
+	}
+
+	rc = rtas_call(ibm_set_slot_reset,4,1, NULL,
+	               pdn->eeh_config_addr,
+	               BUID_HI(pdn->phb->buid),
+	               BUID_LO(pdn->phb->buid),
+	               state);
+	if (rc) {
+		printk (KERN_WARNING "EEH: Unable to reset the failed slot, (%d) #RST=%d dn=%s\n", 
+		        rc, state, pdn->node->full_name);
+		return;
+	}
+}
+
+/** rtas_set_slot_reset -- assert the pci #RST line for 1/4 second
+ *  dn -- device node to be reset.
+ */
+
+void
+rtas_set_slot_reset(struct pci_dn *pdn)
+{
+	int i, rc;
+
+	rtas_pci_slot_reset (pdn, 1);
+
+	/* The PCI bus requires that the reset be held high for at least
+	 * a 100 milliseconds. We wait a bit longer 'just in case'.  */
+
+#define PCI_BUS_RST_HOLD_TIME_MSEC 250
+	msleep (PCI_BUS_RST_HOLD_TIME_MSEC);
+	
+	/* We might get hit with another EEH freeze as soon as the 
+	 * pci slot reset line is dropped. Make sure we don't miss
+	 * these, and clear the flag now. */
+	eeh_clear_slot (pdn->node, EEH_MODE_ISOLATED);
+
+	rtas_pci_slot_reset (pdn, 0);
+
+	/* After a PCI slot has been reset, the PCI Express spec requires
+	 * a 1.5 second idle time for the bus to stabilize, before starting
+	 * up traffic. */
+#define PCI_BUS_SETTLE_TIME_MSEC 1800
+	msleep (PCI_BUS_SETTLE_TIME_MSEC);
+
+	/* Now double check with the firmware to make sure the device is
+	 * ready to be used; if not, wait for recovery. */
+	for (i=0; i<10; i++) {
+		rc = eeh_slot_availability (pdn);
+		if (rc <= 0) break;
+
+		msleep (rc+100);
+	}
+}
+
+/* ------------------------------------------------------- */
+/** Save and restore of PCI BARs
+ *
+ * Although firmware will set up BARs during boot, it doesn't
+ * set up device BAR's after a device reset, although it will,
+ * if requested, set up bridge configuration. Thus, we need to
+ * configure the PCI devices ourselves.  
+ */
+
+/**
+ * __restore_bars - Restore the Base Address Registers
+ * Loads the PCI configuration space base address registers,
+ * the expansion ROM base address, the latency timer, and etc.
+ * from the saved values in the device node.
+ */
+static inline void __restore_bars (struct pci_dn *pdn)
+{
+	int i;
+
+	if (NULL==pdn->phb) return;
+	for (i=4; i<10; i++) {
+		rtas_write_config(pdn, i*4, 4, pdn->config_space[i]);
+	}
+
+	/* 12 == Expansion ROM Address */
+	rtas_write_config(pdn, 12*4, 4, pdn->config_space[12]);
+
+#define BYTE_SWAP(OFF) (8*((OFF)/4)+3-(OFF))
+#define SAVED_BYTE(OFF) (((u8 *)(pdn->config_space))[BYTE_SWAP(OFF)])
+
+	rtas_write_config (pdn, PCI_CACHE_LINE_SIZE, 1,
+	            SAVED_BYTE(PCI_CACHE_LINE_SIZE));
+
+	rtas_write_config (pdn, PCI_LATENCY_TIMER, 1,
+	            SAVED_BYTE(PCI_LATENCY_TIMER));
+
+	/* max latency, min grant, interrupt pin and line */
+	rtas_write_config(pdn, 15*4, 4, pdn->config_space[15]);
+}
+
+/**
+ * eeh_restore_bars - restore the PCI config space info
+ *
+ * This routine performs a recursive walk to the children
+ * of this device as well.
+ */
+void eeh_restore_bars(struct pci_dn *pdn)
+{
+	struct device_node *dn;
+	if (!pdn) 
+		return;
+	
+	if (! pdn->eeh_is_bridge)
+		__restore_bars (pdn);
+
+	dn = pdn->node->child;
+	while (dn) {
+		eeh_restore_bars (PCI_DN(dn));
+		dn = dn->sibling;
+	}
+}
+
+/**
+ * eeh_save_bars - save device bars
+ *
+ * Save the values of the device bars. Unlike the restore
+ * routine, this routine is *not* recursive. This is because
+ * PCI devices are added individuallly; but, for the restore,
+ * an entire slot is reset at a time.
+ */
+static void eeh_save_bars(struct pci_dev * pdev, struct pci_dn *pdn)
+{
+	int i;
+
+	if (!pdev || !pdn )
+		return;
+	
+	for (i = 0; i < 16; i++)
+		pci_read_config_dword(pdev, i * 4, &pdn->config_space[i]);
+
+	if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
+		pdn->eeh_is_bridge = 1;
+}
+
+void
+rtas_configure_bridge(struct pci_dn *pdn)
+{
+	int token = rtas_token ("ibm,configure-bridge");
+	int rc;
+
+	if (token == RTAS_UNKNOWN_SERVICE)
+		return;
+	rc = rtas_call(token,3,1, NULL,
+	               pdn->eeh_config_addr,
+	               BUID_HI(pdn->phb->buid),
+	               BUID_LO(pdn->phb->buid));
+	if (rc) {
+		printk (KERN_WARNING "EEH: Unable to configure device bridge (%d) for %s\n",
+		        rc, pdn->node->full_name);
+	}
+}
+
+/* ------------------------------------------------------------- */
+/* The code below deals with enabling EEH for devices during  the
+ * early boot sequence.  EEH must be enabled before any PCI probing
+ * can be done.
+ */
+
+#define EEH_ENABLE 1
+
 struct eeh_early_enable_info {
 	unsigned int buid_hi;
 	unsigned int buid_lo;
@@ -684,9 +925,11 @@ static void *early_enable_eeh(struct device_node *dn, void *data)
 	u32 *device_id = (u32 *)get_property(dn, "device-id", NULL);
 	u32 *regs;
 	int enable;
-	struct pci_dn *pdn = dn->data;
+	struct pci_dn *pdn = PCI_DN(dn);
 
 	pdn->eeh_mode = 0;
+	pdn->eeh_check_count = 0;
+	pdn->eeh_freeze_count = 0;
 
 	if (status && strcmp(status, "ok") != 0)
 		return NULL;	/* ignore devices with bad status */
@@ -723,8 +966,9 @@ static void *early_enable_eeh(struct device_node *dn, void *data)
 		/* First register entry is addr (00BBSS00)  */
 		/* Try to enable eeh */
 		ret = rtas_call(ibm_set_eeh_option, 4, 1, NULL,
-				regs[0], info->buid_hi, info->buid_lo,
-				EEH_ENABLE);
+		                regs[0], info->buid_hi, info->buid_lo,
+		                EEH_ENABLE);
+
 		if (ret == 0) {
 			eeh_subsystem_enabled = 1;
 			pdn->eeh_mode |= EEH_MODE_SUPPORTED;
@@ -736,7 +980,7 @@ static void *early_enable_eeh(struct device_node *dn, void *data)
 
 			/* This device doesn't support EEH, but it may have an
 			 * EEH parent, in which case we mark it as supported. */
-			if (dn->parent && dn->parent->data
+			if (dn->parent && PCI_DN(dn->parent)
 			    && (PCI_DN(dn->parent)->eeh_mode & EEH_MODE_SUPPORTED)) {
 				/* Parent supports EEH. */
 				pdn->eeh_mode |= EEH_MODE_SUPPORTED;
@@ -749,7 +993,7 @@ static void *early_enable_eeh(struct device_node *dn, void *data)
 		       dn->full_name);
 	}
 
-	return NULL; 
+	return NULL;
 }
 
 /*
@@ -770,6 +1014,9 @@ void __init eeh_init(void)
 	struct device_node *phb, *np;
 	struct eeh_early_enable_info info;
 
+	spin_lock_init(&confirm_error_lock);
+	spin_lock_init(&slot_errbuf_lock);
+
 	np = of_find_node_by_path("/rtas");
 	if (np == NULL)
 		return;
@@ -797,13 +1044,11 @@ void __init eeh_init(void)
 	for (phb = of_find_node_by_name(NULL, "pci"); phb;
 	     phb = of_find_node_by_name(phb, "pci")) {
 		unsigned long buid;
-		struct pci_dn *pci;
 
 		buid = get_phb_buid(phb);
-		if (buid == 0 || phb->data == NULL)
+		if (buid == 0 || PCI_DN(phb) == NULL)
 			continue;
 
-		pci = phb->data;
 		info.buid_lo = BUID_LO(buid);
 		info.buid_hi = BUID_HI(buid);
 		traverse_pci_devices(phb, early_enable_eeh, &info);
@@ -832,11 +1077,13 @@ void eeh_add_device_early(struct device_node *dn)
 	struct pci_controller *phb;
 	struct eeh_early_enable_info info;
 
-	if (!dn || !dn->data)
+	if (!dn || !PCI_DN(dn))
 		return;
 	phb = PCI_DN(dn)->phb;
 	if (NULL == phb || 0 == phb->buid) {
-		printk(KERN_WARNING "EEH: Expected buid but found none\n");
+		printk(KERN_WARNING "EEH: Expected buid but found none for %s\n",
+		       dn->full_name);
+		dump_stack();
 		return;
 	}
 
@@ -844,7 +1091,7 @@ void eeh_add_device_early(struct device_node *dn)
 	info.buid_lo = BUID_LO(phb->buid);
 	early_enable_eeh(dn, &info);
 }
-EXPORT_SYMBOL(eeh_add_device_early);
+EXPORT_SYMBOL_GPL(eeh_add_device_early);
 
 /**
  * eeh_add_device_late - perform EEH initialization for the indicated pci device
@@ -855,6 +1102,9 @@ EXPORT_SYMBOL(eeh_add_device_early);
  */
 void eeh_add_device_late(struct pci_dev *dev)
 {
+	struct device_node *dn;
+	struct pci_dn *pdn;
+
 	if (!dev || !eeh_subsystem_enabled)
 		return;
 
@@ -862,9 +1112,15 @@ void eeh_add_device_late(struct pci_dev *dev)
 	printk(KERN_DEBUG "EEH: adding device %s\n", pci_name(dev));
 #endif
 
+	pci_dev_get (dev);
+	dn = pci_device_to_OF_node(dev);
+	pdn = PCI_DN(dn);
+	pdn->pcidev = dev;
+
 	pci_addr_cache_insert_device (dev);
+	eeh_save_bars(dev, pdn);
 }
-EXPORT_SYMBOL(eeh_add_device_late);
+EXPORT_SYMBOL_GPL(eeh_add_device_late);
 
 /**
  * eeh_remove_device - undo EEH setup for the indicated pci device
@@ -875,6 +1131,7 @@ EXPORT_SYMBOL(eeh_add_device_late);
  */
 void eeh_remove_device(struct pci_dev *dev)
 {
+	struct device_node *dn;
 	if (!dev || !eeh_subsystem_enabled)
 		return;
 
@@ -883,20 +1140,29 @@ void eeh_remove_device(struct pci_dev *dev)
 	printk(KERN_DEBUG "EEH: remove device %s\n", pci_name(dev));
 #endif
 	pci_addr_cache_remove_device(dev);
+
+	dn = pci_device_to_OF_node(dev);
+	PCI_DN(dn)->pcidev = NULL;
+	pci_dev_put (dev);
 }
-EXPORT_SYMBOL(eeh_remove_device);
+EXPORT_SYMBOL_GPL(eeh_remove_device);
 
 static int proc_eeh_show(struct seq_file *m, void *v)
 {
 	unsigned int cpu;
 	unsigned long ffs = 0, positives = 0, failures = 0;
 	unsigned long resets = 0;
+	unsigned long no_dev = 0, no_dn = 0, no_cfg = 0, no_check = 0;
 
 	for_each_cpu(cpu) {
 		ffs += per_cpu(total_mmio_ffs, cpu);
 		positives += per_cpu(false_positives, cpu);
 		failures += per_cpu(ignored_failures, cpu);
 		resets += per_cpu(slot_resets, cpu);
+		no_dev += per_cpu(no_device, cpu);
+		no_dn += per_cpu(no_dn, cpu);
+		no_cfg += per_cpu(no_cfg_addr, cpu);
+		no_check += per_cpu(ignored_check, cpu);
 	}
 
 	if (0 == eeh_subsystem_enabled) {
@@ -904,13 +1170,17 @@ static int proc_eeh_show(struct seq_file *m, void *v)
 		seq_printf(m, "eeh_total_mmio_ffs=%ld\n", ffs);
 	} else {
 		seq_printf(m, "EEH Subsystem is enabled\n");
-		seq_printf(m, "eeh_total_mmio_ffs=%ld\n"
-			   "eeh_false_positives=%ld\n"
-			   "eeh_ignored_failures=%ld\n"
-			   "eeh_slot_resets=%ld\n"
-				"eeh_fail_count=%d\n",
-			   ffs, positives, failures, resets,
-				eeh_fail_count.counter);
+		seq_printf(m,
+				"no device=%ld\n"
+				"no device node=%ld\n"
+				"no config address=%ld\n"
+				"check not wanted=%ld\n"
+				"eeh_total_mmio_ffs=%ld\n"
+				"eeh_false_positives=%ld\n"
+				"eeh_ignored_failures=%ld\n"
+				"eeh_slot_resets=%ld\n",
+				no_dev, no_dn, no_cfg, no_check,
+				ffs, positives, failures, resets);
 	}
 
 	return 0;
@@ -932,7 +1202,7 @@ static int __init eeh_init_proc(void)
 {
 	struct proc_dir_entry *e;
 
-	if (systemcfg->platform & PLATFORM_PSERIES) {
+	if (platform_is_pseries()) {
 		e = create_proc_entry("ppc64/eeh", 0, NULL);
 		if (e)
 			e->proc_fops = &proc_eeh_operations;
diff --git a/arch/powerpc/platforms/pseries/eeh_event.c b/arch/powerpc/platforms/pseries/eeh_event.c
new file mode 100644
index 000000000000..92497333c2b6
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/eeh_event.c
@@ -0,0 +1,155 @@
+/*
+ * eeh_event.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ * Copyright (c) 2005 Linas Vepstas <linas@linas.org>
+ */
+
+#include <linux/list.h>
+#include <linux/pci.h>
+#include <asm/eeh_event.h>
+
+/** Overview:
+ *  EEH error states may be detected within exception handlers;
+ *  however, the recovery processing needs to occur asynchronously
+ *  in a normal kernel context and not an interrupt context.
+ *  This pair of routines creates an event and queues it onto a
+ *  work-queue, where a worker thread can drive recovery.
+ */
+
+/* EEH event workqueue setup. */
+static spinlock_t eeh_eventlist_lock = SPIN_LOCK_UNLOCKED;
+LIST_HEAD(eeh_eventlist);
+static void eeh_thread_launcher(void *);
+DECLARE_WORK(eeh_event_wq, eeh_thread_launcher, NULL);
+
+/**
+ * eeh_panic - call panic() for an eeh event that cannot be handled.
+ * The philosophy of this routine is that it is better to panic and
+ * halt the OS than it is to risk possible data corruption by
+ * oblivious device drivers that don't know better.
+ *
+ * @dev pci device that had an eeh event
+ * @reset_state current reset state of the device slot
+ */
+static void eeh_panic(struct pci_dev *dev, int reset_state)
+{
+	/*
+	 * Since the panic_on_oops sysctl is used to halt the system
+	 * in light of potential corruption, we can use it here.
+	 */
+	if (panic_on_oops) {
+		panic("EEH: MMIO failure (%d) on device:%s\n", reset_state,
+		      pci_name(dev));
+	}
+	else {
+		printk(KERN_INFO "EEH: Ignored MMIO failure (%d) on device:%s\n",
+		       reset_state, pci_name(dev));
+	}
+}
+
+/**
+ * eeh_event_handler - dispatch EEH events.  The detection of a frozen
+ * slot can occur inside an interrupt, where it can be hard to do
+ * anything about it.  The goal of this routine is to pull these
+ * detection events out of the context of the interrupt handler, and
+ * re-dispatch them for processing at a later time in a normal context.
+ *
+ * @dummy - unused
+ */
+static int eeh_event_handler(void * dummy)
+{
+	unsigned long flags;
+	struct eeh_event	*event;
+
+	daemonize ("eehd");
+
+	while (1) {
+		set_current_state(TASK_INTERRUPTIBLE);
+
+		spin_lock_irqsave(&eeh_eventlist_lock, flags);
+		event = NULL;
+		if (!list_empty(&eeh_eventlist)) {
+			event = list_entry(eeh_eventlist.next, struct eeh_event, list);
+			list_del(&event->list);
+		}
+		spin_unlock_irqrestore(&eeh_eventlist_lock, flags);
+		if (event == NULL)
+			break;
+
+		printk(KERN_INFO "EEH: Detected PCI bus error on device %s\n",
+		       pci_name(event->dev));
+
+		eeh_panic (event->dev, event->state);
+
+		kfree(event);
+	}
+
+	return 0;
+}
+
+/**
+ * eeh_thread_launcher
+ *
+ * @dummy - unused
+ */
+static void eeh_thread_launcher(void *dummy)
+{
+	if (kernel_thread(eeh_event_handler, NULL, CLONE_KERNEL) < 0)
+		printk(KERN_ERR "Failed to start EEH daemon\n");
+}
+
+/**
+ * eeh_send_failure_event - generate a PCI error event
+ * @dev pci device
+ *
+ * This routine can be called within an interrupt context;
+ * the actual event will be delivered in a normal context
+ * (from a workqueue).
+ */
+int eeh_send_failure_event (struct device_node *dn,
+                            struct pci_dev *dev,
+                            int state,
+                            int time_unavail)
+{
+	unsigned long flags;
+	struct eeh_event *event;
+
+	event = kmalloc(sizeof(*event), GFP_ATOMIC);
+	if (event == NULL) {
+		printk (KERN_ERR "EEH: out of memory, event not handled\n");
+		return 1;
+ 	}
+
+	if (dev)
+		pci_dev_get(dev);
+
+	event->dn = dn;
+	event->dev = dev;
+	event->state = state;
+	event->time_unavail = time_unavail;
+
+	/* We may or may not be called in an interrupt context */
+	spin_lock_irqsave(&eeh_eventlist_lock, flags);
+	list_add(&event->list, &eeh_eventlist);
+	spin_unlock_irqrestore(&eeh_eventlist_lock, flags);
+
+	schedule_work(&eeh_event_wq);
+
+	return 0;
+}
+
+/********************** END OF FILE ******************************/
diff --git a/arch/ppc64/kernel/pSeries_hvCall.S b/arch/powerpc/platforms/pseries/hvCall.S
index 176e8da76466..176e8da76466 100644
--- a/arch/ppc64/kernel/pSeries_hvCall.S
+++ b/arch/powerpc/platforms/pseries/hvCall.S
diff --git a/arch/ppc64/kernel/hvconsole.c b/arch/powerpc/platforms/pseries/hvconsole.c
index 138e128a3886..138e128a3886 100644
--- a/arch/ppc64/kernel/hvconsole.c
+++ b/arch/powerpc/platforms/pseries/hvconsole.c
diff --git a/arch/ppc64/kernel/hvcserver.c b/arch/powerpc/platforms/pseries/hvcserver.c
index bde8f42da854..4d584172055a 100644
--- a/arch/ppc64/kernel/hvcserver.c
+++ b/arch/powerpc/platforms/pseries/hvcserver.c
@@ -22,6 +22,8 @@
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/module.h>
+#include <linux/slab.h>
+
 #include <asm/hvcall.h>
 #include <asm/hvcserver.h>
 #include <asm/io.h>
diff --git a/arch/ppc64/kernel/pSeries_iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 8c6313e7e145..c78f2b290a73 100644
--- a/arch/ppc64/kernel/pSeries_iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -5,7 +5,7 @@
  *
  * Rewrite, cleanup: 
  *
- * Copyright (C) 2004 Olof Johansson <olof@austin.ibm.com>, IBM Corporation
+ * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
  *
  * Dynamic DMA mapping support, pSeries-specific parts, both SMP and LPAR.
  *
@@ -37,16 +37,17 @@
 #include <asm/io.h>
 #include <asm/prom.h>
 #include <asm/rtas.h>
-#include <asm/ppcdebug.h>
 #include <asm/iommu.h>
 #include <asm/pci-bridge.h>
 #include <asm/machdep.h>
 #include <asm/abs_addr.h>
-#include <asm/plpar_wrappers.h>
 #include <asm/pSeries_reconfig.h>
-#include <asm/systemcfg.h>
 #include <asm/firmware.h>
-#include "pci.h"
+#include <asm/tce.h>
+#include <asm/ppc-pci.h>
+#include <asm/udbg.h>
+
+#include "plpar_wrappers.h"
 
 #define DBG(fmt...)
 
@@ -59,6 +60,9 @@ static void tce_build_pSeries(struct iommu_table *tbl, long index,
 	union tce_entry t;
 	union tce_entry *tp;
 
+	index <<= TCE_PAGE_FACTOR;
+	npages <<= TCE_PAGE_FACTOR;
+
 	t.te_word = 0;
 	t.te_rdwr = 1; // Read allowed 
 
@@ -69,11 +73,11 @@ static void tce_build_pSeries(struct iommu_table *tbl, long index,
 
 	while (npages--) {
 		/* can't move this out since we might cross LMB boundary */
-		t.te_rpn = (virt_to_abs(uaddr)) >> PAGE_SHIFT;
+		t.te_rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT;
 	
 		tp->te_word = t.te_word;
 
-		uaddr += PAGE_SIZE;
+		uaddr += TCE_PAGE_SIZE;
 		tp++;
 	}
 }
@@ -84,6 +88,9 @@ static void tce_free_pSeries(struct iommu_table *tbl, long index, long npages)
 	union tce_entry t;
 	union tce_entry *tp;
 
+	npages <<= TCE_PAGE_FACTOR;
+	index <<= TCE_PAGE_FACTOR;
+
 	t.te_word = 0;
 	tp  = ((union tce_entry *)tbl->it_base) + index;
 		
@@ -103,7 +110,7 @@ static void tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
 	union tce_entry tce;
 
 	tce.te_word = 0;
-	tce.te_rpn = (virt_to_abs(uaddr)) >> PAGE_SHIFT;
+	tce.te_rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT;
 	tce.te_rdwr = 1;
 	if (direction != DMA_TO_DEVICE)
 		tce.te_pciwr = 1;
@@ -136,6 +143,9 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 	union tce_entry tce, *tcep;
 	long l, limit;
 
+	tcenum <<= TCE_PAGE_FACTOR;
+	npages <<= TCE_PAGE_FACTOR;
+
 	if (npages == 1)
 		return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
 					   direction);
@@ -155,7 +165,7 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 	}
 
 	tce.te_word = 0;
-	tce.te_rpn = (virt_to_abs(uaddr)) >> PAGE_SHIFT;
+	tce.te_rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT;
 	tce.te_rdwr = 1;
 	if (direction != DMA_TO_DEVICE)
 		tce.te_pciwr = 1;
@@ -166,7 +176,7 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 		 * Set up the page with TCE data, looping through and setting
 		 * the values.
 		 */
-		limit = min_t(long, npages, PAGE_SIZE/sizeof(union tce_entry));
+		limit = min_t(long, npages, 4096/sizeof(union tce_entry));
 
 		for (l = 0; l < limit; l++) {
 			tcep[l] = tce;
@@ -196,6 +206,9 @@ static void tce_free_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages
 	u64 rc;
 	union tce_entry tce;
 
+	tcenum <<= TCE_PAGE_FACTOR;
+	npages <<= TCE_PAGE_FACTOR;
+
 	tce.te_word = 0;
 
 	while (npages--) {
@@ -221,6 +234,9 @@ static void tce_freemulti_pSeriesLP(struct iommu_table *tbl, long tcenum, long n
 	u64 rc;
 	union tce_entry tce;
 
+	tcenum <<= TCE_PAGE_FACTOR;
+	npages <<= TCE_PAGE_FACTOR;
+
 	tce.te_word = 0;
 
 	rc = plpar_tce_stuff((u64)tbl->it_index,
@@ -364,7 +380,8 @@ static void iommu_bus_setup_pSeries(struct pci_bus *bus)
 
 		while (pci->phb->dma_window_size * children > 0x80000000ul)
 			pci->phb->dma_window_size >>= 1;
-		DBG("No ISA/IDE, window size is %x\n", pci->phb->dma_window_size);
+		DBG("No ISA/IDE, window size is 0x%lx\n",
+			pci->phb->dma_window_size);
 		pci->phb->dma_window_base_cur = 0;
 
 		return;
@@ -388,7 +405,7 @@ static void iommu_bus_setup_pSeries(struct pci_bus *bus)
 	while (pci->phb->dma_window_size * children > 0x70000000ul)
 		pci->phb->dma_window_size >>= 1;
 
-	DBG("ISA/IDE, window size is %x\n", pci->phb->dma_window_size);
+	DBG("ISA/IDE, window size is 0x%lx\n", pci->phb->dma_window_size);
 
 }
 
@@ -442,7 +459,7 @@ static void iommu_dev_setup_pSeries(struct pci_dev *dev)
 	struct device_node *dn, *mydn;
 	struct iommu_table *tbl;
 
-	DBG("iommu_dev_setup_pSeries, dev %p (%s)\n", dev, dev->pretty_name);
+	DBG("iommu_dev_setup_pSeries, dev %p (%s)\n", dev, pci_name(dev));
 
 	mydn = dn = pci_device_to_OF_node(dev);
 
@@ -469,7 +486,7 @@ static void iommu_dev_setup_pSeries(struct pci_dev *dev)
 	if (dn && dn->data) {
 		PCI_DN(mydn)->iommu_table = PCI_DN(dn)->iommu_table;
 	} else {
-		DBG("iommu_dev_setup_pSeries, dev %p (%s) has no iommu table\n", dev, dev->pretty_name);
+		DBG("iommu_dev_setup_pSeries, dev %p (%s) has no iommu table\n", dev, pci_name(dev));
 	}
 }
 
@@ -481,7 +498,7 @@ static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long acti
 
 	switch (action) {
 	case PSERIES_RECONFIG_REMOVE:
-		if (pci->iommu_table &&
+		if (pci && pci->iommu_table &&
 		    get_property(np, "ibm,dma-window", NULL))
 			iommu_free_table(np);
 		break;
@@ -503,7 +520,7 @@ static void iommu_dev_setup_pSeriesLP(struct pci_dev *dev)
 	int *dma_window = NULL;
 	struct pci_dn *pci;
 
-	DBG("iommu_dev_setup_pSeriesLP, dev %p (%s)\n", dev, dev->pretty_name);
+	DBG("iommu_dev_setup_pSeriesLP, dev %p (%s)\n", dev, pci_name(dev));
 
 	/* dev setup for LPAR is a little tricky, since the device tree might
 	 * contain the dma-window properties per-device and not neccesarily
@@ -525,9 +542,8 @@ static void iommu_dev_setup_pSeriesLP(struct pci_dev *dev)
 	 * slots on POWER4 machines.
 	 */
 	if (dma_window == NULL || pdn->parent == NULL) {
-		/* Fall back to regular (non-LPAR) dev setup */
-		DBG("No dma window for device, falling back to regular setup\n");
-		iommu_dev_setup_pSeries(dev);
+		DBG("No dma window for device, linking to parent\n");
+		PCI_DN(dn)->iommu_table = PCI_DN(pdn)->iommu_table;
 		return;
 	} else {
 		DBG("Found DMA window, allocating table\n");
@@ -565,7 +581,7 @@ void iommu_init_early_pSeries(void)
 		return;
 	}
 
-	if (systemcfg->platform & PLATFORM_LPAR) {
+	if (platform_is_lpar()) {
 		if (firmware_has_feature(FW_FEATURE_MULTITCE)) {
 			ppc_md.tce_build = tce_buildmulti_pSeriesLP;
 			ppc_md.tce_free	 = tce_freemulti_pSeriesLP;
diff --git a/arch/ppc64/kernel/pSeries_lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index a6de83f2078f..a50e5f3f396d 100644
--- a/arch/ppc64/kernel/pSeries_lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -19,7 +19,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
-#define DEBUG
+#undef DEBUG_LOW
 
 #include <linux/config.h>
 #include <linux/kernel.h>
@@ -31,19 +31,21 @@
 #include <asm/machdep.h>
 #include <asm/abs_addr.h>
 #include <asm/mmu_context.h>
-#include <asm/ppcdebug.h>
 #include <asm/iommu.h>
 #include <asm/tlbflush.h>
 #include <asm/tlb.h>
 #include <asm/prom.h>
 #include <asm/abs_addr.h>
 #include <asm/cputable.h>
-#include <asm/plpar_wrappers.h>
+#include <asm/udbg.h>
+#include <asm/smp.h>
 
-#ifdef DEBUG
-#define DBG(fmt...) udbg_printf(fmt)
+#include "plpar_wrappers.h"
+
+#ifdef DEBUG_LOW
+#define DBG_LOW(fmt...) do { udbg_printf(fmt); } while(0)
 #else
-#define DBG(fmt...)
+#define DBG_LOW(fmt...) do { } while(0)
 #endif
 
 /* in pSeries_hvCall.S */
@@ -260,27 +262,24 @@ out:
 void vpa_init(int cpu)
 {
 	int hwcpu = get_hard_smp_processor_id(cpu);
-	unsigned long vpa = (unsigned long)&(paca[cpu].lppaca);
+	unsigned long vpa = __pa(&paca[cpu].lppaca);
 	long ret;
-	unsigned long flags;
-
-	/* Register the Virtual Processor Area (VPA) */
-	flags = 1UL << (63 - 18);
 
 	if (cpu_has_feature(CPU_FTR_ALTIVEC))
 		paca[cpu].lppaca.vmxregs_in_use = 1;
 
-	ret = register_vpa(flags, hwcpu, __pa(vpa));
+	ret = register_vpa(hwcpu, vpa);
 
 	if (ret)
 		printk(KERN_ERR "WARNING: vpa_init: VPA registration for "
 				"cpu %d (hw %d) of area %lx returns %ld\n",
-				cpu, hwcpu, __pa(vpa), ret);
+				cpu, hwcpu, vpa, ret);
 }
 
 long pSeries_lpar_hpte_insert(unsigned long hpte_group,
-			      unsigned long va, unsigned long prpn,
-			      unsigned long vflags, unsigned long rflags)
+ 			      unsigned long va, unsigned long pa,
+ 			      unsigned long rflags, unsigned long vflags,
+ 			      int psize)
 {
 	unsigned long lpar_rc;
 	unsigned long flags;
@@ -288,11 +287,28 @@ long pSeries_lpar_hpte_insert(unsigned long hpte_group,
 	unsigned long hpte_v, hpte_r;
 	unsigned long dummy0, dummy1;
 
-	hpte_v = ((va >> 23) << HPTE_V_AVPN_SHIFT) | vflags | HPTE_V_VALID;
-	if (vflags & HPTE_V_LARGE)
-		hpte_v &= ~(1UL << HPTE_V_AVPN_SHIFT);
-
-	hpte_r = (prpn << HPTE_R_RPN_SHIFT) | rflags;
+	if (!(vflags & HPTE_V_BOLTED))
+		DBG_LOW("hpte_insert(group=%lx, va=%016lx, pa=%016lx, "
+			"rflags=%lx, vflags=%lx, psize=%d)\n",
+		hpte_group, va, pa, rflags, vflags, psize);
+
+ 	hpte_v = hpte_encode_v(va, psize) | vflags | HPTE_V_VALID;
+	hpte_r = hpte_encode_r(pa, psize) | rflags;
+
+	if (!(vflags & HPTE_V_BOLTED))
+		DBG_LOW(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r);
+
+#if 1
+	{
+		int i;
+		for (i=0;i<8;i++) {
+			unsigned long w0, w1;
+			plpar_pte_read(0, hpte_group, &w0, &w1);
+			BUG_ON (HPTE_V_COMPARE(hpte_v, w0)
+				&& (w0 & HPTE_V_VALID));
+		}
+	}
+#endif
 
 	/* Now fill in the actual HPTE */
 	/* Set CEC cookie to 0         */
@@ -302,23 +318,30 @@ long pSeries_lpar_hpte_insert(unsigned long hpte_group,
 	/* Exact = 0                   */
 	flags = 0;
 
-	/* XXX why is this here? - Anton */
+	/* Make pHyp happy */
 	if (rflags & (_PAGE_GUARDED|_PAGE_NO_CACHE))
 		hpte_r &= ~_PAGE_COHERENT;
 
 	lpar_rc = plpar_hcall(H_ENTER, flags, hpte_group, hpte_v,
 			      hpte_r, &slot, &dummy0, &dummy1);
-
-	if (unlikely(lpar_rc == H_PTEG_Full))
+	if (unlikely(lpar_rc == H_PTEG_Full)) {
+		if (!(vflags & HPTE_V_BOLTED))
+			DBG_LOW(" full\n");
 		return -1;
+	}
 
 	/*
 	 * Since we try and ioremap PHBs we don't own, the pte insert
 	 * will fail. However we must catch the failure in hash_page
 	 * or we will loop forever, so return -2 in this case.
 	 */
-	if (unlikely(lpar_rc != H_Success))
+	if (unlikely(lpar_rc != H_Success)) {
+		if (!(vflags & HPTE_V_BOLTED))
+			DBG_LOW(" lpar err %d\n", lpar_rc);
 		return -2;
+	}
+	if (!(vflags & HPTE_V_BOLTED))
+		DBG_LOW(" -> slot: %d\n", slot & 7);
 
 	/* Because of iSeries, we have to pass down the secondary
 	 * bucket bit here as well
@@ -343,10 +366,8 @@ static long pSeries_lpar_hpte_remove(unsigned long hpte_group)
 		/* don't remove a bolted entry */
 		lpar_rc = plpar_pte_remove(H_ANDCOND, hpte_group + slot_offset,
 					   (0x1UL << 4), &dummy1, &dummy2);
-
 		if (lpar_rc == H_Success)
 			return i;
-
 		BUG_ON(lpar_rc != H_Not_Found);
 
 		slot_offset++;
@@ -374,20 +395,28 @@ static void pSeries_lpar_hptab_clear(void)
  * We can probably optimize here and assume the high bits of newpp are
  * already zero.  For now I am paranoid.
  */
-static long pSeries_lpar_hpte_updatepp(unsigned long slot, unsigned long newpp,
-				       unsigned long va, int large, int local)
+static long pSeries_lpar_hpte_updatepp(unsigned long slot,
+				       unsigned long newpp,
+				       unsigned long va,
+				       int psize, int local)
 {
 	unsigned long lpar_rc;
 	unsigned long flags = (newpp & 7) | H_AVPN;
-	unsigned long avpn = va >> 23;
+	unsigned long want_v;
 
-	if (large)
-		avpn &= ~0x1UL;
+	want_v = hpte_encode_v(va, psize);
 
-	lpar_rc = plpar_pte_protect(flags, slot, (avpn << 7));
+	DBG_LOW("    update: avpnv=%016lx, hash=%016lx, f=%x, psize: %d ... ",
+		want_v & HPTE_V_AVPN, slot, flags, psize);
 
-	if (lpar_rc == H_Not_Found)
+	lpar_rc = plpar_pte_protect(flags, slot, want_v & HPTE_V_AVPN);
+
+	if (lpar_rc == H_Not_Found) {
+		DBG_LOW("not found !\n");
 		return -1;
+	}
+
+	DBG_LOW("ok\n");
 
 	BUG_ON(lpar_rc != H_Success);
 
@@ -413,21 +442,22 @@ static unsigned long pSeries_lpar_hpte_getword0(unsigned long slot)
 	return dword0;
 }
 
-static long pSeries_lpar_hpte_find(unsigned long vpn)
+static long pSeries_lpar_hpte_find(unsigned long va, int psize)
 {
 	unsigned long hash;
 	unsigned long i, j;
 	long slot;
-	unsigned long hpte_v;
+	unsigned long want_v, hpte_v;
 
-	hash = hpt_hash(vpn, 0);
+	hash = hpt_hash(va, mmu_psize_defs[psize].shift);
+	want_v = hpte_encode_v(va, psize);
 
 	for (j = 0; j < 2; j++) {
 		slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
 		for (i = 0; i < HPTES_PER_GROUP; i++) {
 			hpte_v = pSeries_lpar_hpte_getword0(slot);
 
-			if ((HPTE_V_AVPN_VAL(hpte_v) == (vpn >> 11))
+			if (HPTE_V_COMPARE(hpte_v, want_v)
 			    && (hpte_v & HPTE_V_VALID)
 			    && (!!(hpte_v & HPTE_V_SECONDARY) == j)) {
 				/* HPTE matches */
@@ -444,17 +474,15 @@ static long pSeries_lpar_hpte_find(unsigned long vpn)
 } 
 
 static void pSeries_lpar_hpte_updateboltedpp(unsigned long newpp,
-					     unsigned long ea)
+					     unsigned long ea,
+					     int psize)
 {
-	unsigned long lpar_rc;
-	unsigned long vsid, va, vpn, flags;
-	long slot;
+	unsigned long lpar_rc, slot, vsid, va, flags;
 
 	vsid = get_kernel_vsid(ea);
 	va = (vsid << 28) | (ea & 0x0fffffff);
-	vpn = va >> PAGE_SHIFT;
 
-	slot = pSeries_lpar_hpte_find(vpn);
+	slot = pSeries_lpar_hpte_find(va, psize);
 	BUG_ON(slot == -1);
 
 	flags = newpp & 7;
@@ -464,18 +492,18 @@ static void pSeries_lpar_hpte_updateboltedpp(unsigned long newpp,
 }
 
 static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long va,
-					 int large, int local)
+					 int psize, int local)
 {
-	unsigned long avpn = va >> 23;
+	unsigned long want_v;
 	unsigned long lpar_rc;
 	unsigned long dummy1, dummy2;
 
-	if (large)
-		avpn &= ~0x1UL;
-
-	lpar_rc = plpar_pte_remove(H_AVPN, slot, (avpn << 7), &dummy1,
-				   &dummy2);
+	DBG_LOW("    inval : slot=%lx, va=%016lx, psize: %d, local: %d",
+		slot, va, psize, local);
 
+	want_v = hpte_encode_v(va, psize);
+	lpar_rc = plpar_pte_remove(H_AVPN, slot, want_v & HPTE_V_AVPN,
+				   &dummy1, &dummy2);
 	if (lpar_rc == H_Not_Found)
 		return;
 
@@ -486,8 +514,7 @@ static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long va,
  * Take a spinlock around flushes to avoid bouncing the hypervisor tlbie
  * lock.
  */
-void pSeries_lpar_flush_hash_range(unsigned long context, unsigned long number,
-				   int local)
+void pSeries_lpar_flush_hash_range(unsigned long number, int local)
 {
 	int i;
 	unsigned long flags = 0;
@@ -498,7 +525,8 @@ void pSeries_lpar_flush_hash_range(unsigned long context, unsigned long number,
 		spin_lock_irqsave(&pSeries_lpar_tlbie_lock, flags);
 
 	for (i = 0; i < number; i++)
-		flush_hash_page(context, batch->addr[i], batch->pte[i], local);
+		flush_hash_page(batch->vaddr[i], batch->pte[i],
+				batch->psize, local);
 
 	if (lock_tlbie)
 		spin_unlock_irqrestore(&pSeries_lpar_tlbie_lock, flags);
diff --git a/arch/ppc64/kernel/pSeries_nvram.c b/arch/powerpc/platforms/pseries/nvram.c
index 18abfb1f4e24..18abfb1f4e24 100644
--- a/arch/ppc64/kernel/pSeries_nvram.c
+++ b/arch/powerpc/platforms/pseries/nvram.c
diff --git a/arch/ppc64/kernel/pSeries_pci.c b/arch/powerpc/platforms/pseries/pci.c
index 1f5f141fb7a1..999a9620b5ce 100644
--- a/arch/ppc64/kernel/pSeries_pci.c
+++ b/arch/powerpc/platforms/pseries/pci.c
@@ -29,10 +29,9 @@
 
 #include <asm/pci-bridge.h>
 #include <asm/prom.h>
+#include <asm/ppc-pci.h>
 
-#include "pci.h"
-
-static int __initdata s7a_workaround = -1;
+static int __devinitdata s7a_workaround = -1;
 
 #if 0
 void pcibios_name_device(struct pci_dev *dev)
@@ -60,7 +59,7 @@ void pcibios_name_device(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_name_device);
 #endif
 
-static void __init check_s7a(void)
+static void __devinit check_s7a(void)
 {
 	struct device_node *root;
 	char *model;
@@ -108,7 +107,6 @@ static void __init pSeries_request_regions(void)
 
 void __init pSeries_final_fixup(void)
 {
-	phbs_remap_io();
 	pSeries_request_regions();
 
 	pci_addr_cache_build();
@@ -124,7 +122,7 @@ static void fixup_winbond_82c105(struct pci_dev* dev)
 	int i;
 	unsigned int reg;
 
-	if (!(systemcfg->platform & PLATFORM_PSERIES))
+	if (!platform_is_pseries())
 		return;
 
 	printk("Using INTC for W82c105 IDE controller.\n");
diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h
new file mode 100644
index 000000000000..3bd1b3e06003
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h
@@ -0,0 +1,110 @@
+#ifndef _PSERIES_PLPAR_WRAPPERS_H
+#define _PSERIES_PLPAR_WRAPPERS_H
+
+#include <asm/hvcall.h>
+
+static inline long poll_pending(void)
+{
+	unsigned long dummy;
+	return plpar_hcall(H_POLL_PENDING, 0, 0, 0, 0, &dummy, &dummy, &dummy);
+}
+
+static inline long prod_processor(void)
+{
+	plpar_hcall_norets(H_PROD);
+	return 0;
+}
+
+static inline long cede_processor(void)
+{
+	plpar_hcall_norets(H_CEDE);
+	return 0;
+}
+
+static inline long vpa_call(unsigned long flags, unsigned long cpu,
+		unsigned long vpa)
+{
+	/* flags are in bits 16-18 (counting from most significant bit) */
+	flags = flags << (63 - 18);
+
+	return plpar_hcall_norets(H_REGISTER_VPA, flags, cpu, vpa);
+}
+
+static inline long unregister_vpa(unsigned long cpu, unsigned long vpa)
+{
+	return vpa_call(0x5, cpu, vpa);
+}
+
+static inline long register_vpa(unsigned long cpu, unsigned long vpa)
+{
+	return vpa_call(0x1, cpu, vpa);
+}
+
+extern void vpa_init(int cpu);
+
+static inline long plpar_pte_remove(unsigned long flags, unsigned long ptex,
+		unsigned long avpn, unsigned long *old_pteh_ret,
+		unsigned long *old_ptel_ret)
+{
+	unsigned long dummy;
+	return plpar_hcall(H_REMOVE, flags, ptex, avpn, 0, old_pteh_ret,
+			old_ptel_ret, &dummy);
+}
+
+static inline long plpar_pte_read(unsigned long flags, unsigned long ptex,
+		unsigned long *old_pteh_ret, unsigned long *old_ptel_ret)
+{
+	unsigned long dummy;
+	return plpar_hcall(H_READ, flags, ptex, 0, 0, old_pteh_ret,
+			old_ptel_ret, &dummy);
+}
+
+static inline long plpar_pte_protect(unsigned long flags, unsigned long ptex,
+		unsigned long avpn)
+{
+	return plpar_hcall_norets(H_PROTECT, flags, ptex, avpn);
+}
+
+static inline long plpar_tce_get(unsigned long liobn, unsigned long ioba,
+		unsigned long *tce_ret)
+{
+	unsigned long dummy;
+	return plpar_hcall(H_GET_TCE, liobn, ioba, 0, 0, tce_ret, &dummy,
+			&dummy);
+}
+
+static inline long plpar_tce_put(unsigned long liobn, unsigned long ioba,
+		unsigned long tceval)
+{
+	return plpar_hcall_norets(H_PUT_TCE, liobn, ioba, tceval);
+}
+
+static inline long plpar_tce_put_indirect(unsigned long liobn,
+		unsigned long ioba, unsigned long page, unsigned long count)
+{
+	return plpar_hcall_norets(H_PUT_TCE_INDIRECT, liobn, ioba, page, count);
+}
+
+static inline long plpar_tce_stuff(unsigned long liobn, unsigned long ioba,
+		unsigned long tceval, unsigned long count)
+{
+	return plpar_hcall_norets(H_STUFF_TCE, liobn, ioba, tceval, count);
+}
+
+static inline long plpar_get_term_char(unsigned long termno,
+		unsigned long *len_ret, char *buf_ret)
+{
+	unsigned long *lbuf = (unsigned long *)buf_ret;	/* TODO: alignment? */
+	return plpar_hcall(H_GET_TERM_CHAR, termno, 0, 0, 0, len_ret,
+			lbuf + 0, lbuf + 1);
+}
+
+static inline long plpar_put_term_char(unsigned long termno, unsigned long len,
+		const char *buffer)
+{
+	unsigned long *lbuf = (unsigned long *)buffer;	/* TODO: alignment? */
+	return plpar_hcall_norets(H_PUT_TERM_CHAR, termno, len, lbuf[0],
+			lbuf[1]);
+}
+
+#endif /* _PSERIES_PLPAR_WRAPPERS_H */
diff --git a/arch/ppc64/kernel/ras.c b/arch/powerpc/platforms/pseries/ras.c
index 41b97dc9cc0a..fbd214d68b07 100644
--- a/arch/ppc64/kernel/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -1,17 +1,16 @@
 /*
- * ras.c
  * Copyright (C) 2001 Dave Engebretsen IBM Corporation
- * 
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- * 
+ *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- * 
+ *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
@@ -19,7 +18,7 @@
 
 /* Change Activity:
  * 2001/09/21 : engebret : Created with minimal EPOW and HW exception support.
- * End Change Activity 
+ * End Change Activity
  */
 
 #include <linux/errno.h>
@@ -49,7 +48,7 @@
 #include <asm/ptrace.h>
 #include <asm/machdep.h>
 #include <asm/rtas.h>
-#include <asm/ppcdebug.h>
+#include <asm/udbg.h>
 
 static unsigned char ras_log_buf[RTAS_ERROR_LOG_MAX];
 static DEFINE_SPINLOCK(ras_log_buf_lock);
@@ -323,7 +322,7 @@ static int recover_mce(struct pt_regs *regs, struct rtas_error_log * err)
 		nonfatal = 1;
 	}
 
- 	log_error((char *)err, ERR_TYPE_RTAS_LOG, !nonfatal);
+	log_error((char *)err, ERR_TYPE_RTAS_LOG, !nonfatal);
 
 	return nonfatal;
 }
diff --git a/arch/ppc64/kernel/pSeries_reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
index 58c61219d08e..d8864164dbe8 100644
--- a/arch/ppc64/kernel/pSeries_reconfig.c
+++ b/arch/powerpc/platforms/pseries/reconfig.c
@@ -286,10 +286,8 @@ static struct property *new_property(const char *name, const int length,
 	return new;
 
 cleanup:
-	if (new->name)
-		kfree(new->name);
-	if (new->value)
-		kfree(new->value);
+	kfree(new->name);
+	kfree(new->value);
 	kfree(new);
 	return NULL;
 }
@@ -410,7 +408,7 @@ static int proc_ppc64_create_ofdt(void)
 {
 	struct proc_dir_entry *ent;
 
-	if (!(systemcfg->platform & PLATFORM_PSERIES))
+	if (!platform_is_pseries())
 		return 0;
 
 	ent = create_proc_entry("ppc64/ofdt", S_IWUSR, NULL);
diff --git a/arch/ppc64/kernel/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c
index e26b0420b6dd..a6f628d4c9dc 100644
--- a/arch/ppc64/kernel/rtasd.c
+++ b/arch/powerpc/platforms/pseries/rtasd.c
@@ -27,7 +27,6 @@
 #include <asm/prom.h>
 #include <asm/nvram.h>
 #include <asm/atomic.h>
-#include <asm/systemcfg.h>
 
 #if 0
 #define DEBUG(A...)	printk(KERN_ERR A)
@@ -482,10 +481,12 @@ static int __init rtas_init(void)
 {
 	struct proc_dir_entry *entry;
 
-	/* No RTAS, only warn if we are on a pSeries box  */
+	if (!platform_is_pseries())
+		return 0;
+
+	/* No RTAS */
 	if (rtas_token("event-scan") == RTAS_UNKNOWN_SERVICE) {
-		if (systemcfg->platform & PLATFORM_PSERIES)
-			printk(KERN_INFO "rtasd: no event-scan on system\n");
+		printk(KERN_INFO "rtasd: no event-scan on system\n");
 		return 1;
 	}
 
diff --git a/arch/ppc64/kernel/scanlog.c b/arch/powerpc/platforms/pseries/scanlog.c
index 215bf8900304..2edc947f7c44 100644
--- a/arch/ppc64/kernel/scanlog.c
+++ b/arch/powerpc/platforms/pseries/scanlog.c
@@ -225,8 +225,7 @@ int __init scanlog_init(void)
 void __exit scanlog_cleanup(void)
 {
 	if (proc_ppc64_scan_log_dump) {
-		if (proc_ppc64_scan_log_dump->data)
-			kfree(proc_ppc64_scan_log_dump->data);
+		kfree(proc_ppc64_scan_log_dump->data);
 		remove_proc_entry("scan-log-dump", proc_ppc64_scan_log_dump->parent);
 	}
 }
diff --git a/arch/ppc64/kernel/pSeries_setup.c b/arch/powerpc/platforms/pseries/setup.c
index 3009701eb90d..4a465f067ede 100644
--- a/arch/ppc64/kernel/pSeries_setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -1,5 +1,5 @@
 /*
- *  linux/arch/ppc/kernel/setup.c
+ *  64-bit pSeries and RS/6000 setup code.
  *
  *  Copyright (C) 1995  Linus Torvalds
  *  Adapted from 'alpha' version by Gary Thomas
@@ -58,14 +58,16 @@
 #include <asm/irq.h>
 #include <asm/time.h>
 #include <asm/nvram.h>
-#include <asm/plpar_wrappers.h>
-#include <asm/xics.h>
+#include "xics.h"
 #include <asm/firmware.h>
 #include <asm/pmc.h>
+#include <asm/mpic.h>
+#include <asm/ppc-pci.h>
+#include <asm/i8259.h>
+#include <asm/udbg.h>
+#include <asm/smp.h>
 
-#include "i8259.h"
-#include "mpic.h"
-#include "pci.h"
+#include "plpar_wrappers.h"
 
 #ifdef DEBUG
 #define DBG(fmt...) udbg_printf(fmt)
@@ -84,13 +86,12 @@ int fwnmi_active;  /* TRUE if an FWNMI handler is present */
 extern void pSeries_system_reset_exception(struct pt_regs *regs);
 extern int pSeries_machine_check_exception(struct pt_regs *regs);
 
-static int pseries_shared_idle(void);
-static int pseries_dedicated_idle(void);
+static void pseries_shared_idle(void);
+static void pseries_dedicated_idle(void);
 
-static volatile void __iomem * chrp_int_ack_special;
 struct mpic *pSeries_mpic;
 
-void pSeries_get_cpuinfo(struct seq_file *m)
+void pSeries_show_cpuinfo(struct seq_file *m)
 {
 	struct device_node *root;
 	const char *model = "";
@@ -119,19 +120,11 @@ static void __init fwnmi_init(void)
 		fwnmi_active = 1;
 }
 
-static int pSeries_irq_cascade(struct pt_regs *regs, void *data)
-{
-	if (chrp_int_ack_special)
-		return readb(chrp_int_ack_special);
-	else
-		return i8259_irq(smp_processor_id());
-}
-
 static void __init pSeries_init_mpic(void)
 {
         unsigned int *addrp;
 	struct device_node *np;
-        int i;
+	unsigned long intack = 0;
 
 	/* All ISUs are setup, complete initialization */
 	mpic_init(pSeries_mpic);
@@ -142,16 +135,14 @@ static void __init pSeries_init_mpic(void)
                  get_property(np, "8259-interrupt-acknowledge", NULL)))
                 printk(KERN_ERR "Cannot find pci to get ack address\n");
         else
-		chrp_int_ack_special = ioremap(addrp[prom_n_addr_cells(np)-1], 1);
+		intack = addrp[prom_n_addr_cells(np)-1];
 	of_node_put(np);
 
 	/* Setup the legacy interrupts & controller */
-        for (i = 0; i < NUM_ISA_INTERRUPTS; i++)
-                irq_desc[i].handler = &i8259_pic;
-	i8259_init(0);
+	i8259_init(intack, 0);
 
 	/* Hook cascade to mpic */
-	mpic_setup_cascade(NUM_ISA_INTERRUPTS, pSeries_irq_cascade, NULL);
+	mpic_setup_cascade(NUM_ISA_INTERRUPTS, i8259_irq_cascade, NULL);
 }
 
 static void __init pSeries_setup_mpic(void)
@@ -209,14 +200,12 @@ static void __init pSeries_setup_arch(void)
 	if (ppc64_interrupt_controller == IC_OPEN_PIC) {
 		ppc_md.init_IRQ       = pSeries_init_mpic;
 		ppc_md.get_irq        = mpic_get_irq;
-	 	ppc_md.cpu_irq_down   = mpic_teardown_this_cpu;
 		/* Allocate the mpic now, so that find_and_init_phbs() can
 		 * fill the ISUs */
 		pSeries_setup_mpic();
 	} else {
 		ppc_md.init_IRQ       = xics_init_IRQ;
 		ppc_md.get_irq        = xics_get_irq;
-		ppc_md.cpu_irq_down   = xics_teardown_cpu;
 	}
 
 #ifdef CONFIG_SMP
@@ -241,10 +230,6 @@ static void __init pSeries_setup_arch(void)
 	find_and_init_phbs();
 	eeh_init();
 
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
-
 	pSeries_nvram_init();
 
 	/* Choose an idle loop */
@@ -262,7 +247,7 @@ static void __init pSeries_setup_arch(void)
 		ppc_md.idle_loop = default_idle;
 	}
 
-	if (systemcfg->platform & PLATFORM_LPAR)
+	if (platform_is_lpar())
 		ppc_md.enable_pmcs = pseries_lpar_enable_pmcs;
 	else
 		ppc_md.enable_pmcs = power4_enable_pmcs;
@@ -319,9 +304,7 @@ static void __init fw_feature_init(void)
 	}
 
 	of_node_put(dn);
- no_rtas:
-	printk(KERN_INFO "firmware_features = 0x%lx\n", 
-	       ppc64_firmware_features);
+no_rtas:
 
 	DBG(" <- fw_feature_init()\n");
 }
@@ -365,6 +348,17 @@ static void pSeries_mach_cpu_die(void)
 	for(;;);
 }
 
+static int pseries_set_dabr(unsigned long dabr)
+{
+	return plpar_hcall_norets(H_SET_DABR, dabr);
+}
+
+static int pseries_set_xdabr(unsigned long dabr)
+{
+	/* We want to catch accesses from kernel and userspace */
+	return plpar_hcall_norets(H_SET_XDABR, dabr,
+			H_DABRX_KERNEL | H_DABRX_USER);
+}
 
 /*
  * Early initialization.  Relocation is on but do not reference unbolted pages
@@ -380,7 +374,7 @@ static void __init pSeries_init_early(void)
 
 	fw_feature_init();
 	
-	if (systemcfg->platform & PLATFORM_LPAR)
+	if (platform_is_lpar())
 		hpte_init_lpar();
 	else {
 		hpte_init_native();
@@ -390,7 +384,7 @@ static void __init pSeries_init_early(void)
 
 	generic_find_legacy_serial_ports(&physport, &default_speed);
 
-	if (systemcfg->platform & PLATFORM_LPAR)
+	if (platform_is_lpar())
 		find_udbg_vterm();
 	else if (physport) {
 		/* Map the uart for udbg. */
@@ -400,6 +394,10 @@ static void __init pSeries_init_early(void)
 		DBG("Hello World !\n");
 	}
 
+	if (firmware_has_feature(FW_FEATURE_DABR))
+		ppc_md.set_dabr = pseries_set_dabr;
+	else if (firmware_has_feature(FW_FEATURE_XDABR))
+		ppc_md.set_dabr = pseries_set_xdabr;
 
 	iommu_init_early_pSeries();
 
@@ -467,6 +465,7 @@ static inline void dedicated_idle_sleep(unsigned int cpu)
 		 * more.
 		 */
 		clear_thread_flag(TIF_POLLING_NRFLAG);
+		smp_mb__after_clear_bit();
 
 		/*
 		 * SMT dynamic mode. Cede will result in this thread going
@@ -479,6 +478,7 @@ static inline void dedicated_idle_sleep(unsigned int cpu)
 			cede_processor();
 		else
 			local_irq_enable();
+		set_thread_flag(TIF_POLLING_NRFLAG);
 	} else {
 		/*
 		 * Give the HV an opportunity at the processor, since we are
@@ -488,13 +488,13 @@ static inline void dedicated_idle_sleep(unsigned int cpu)
 	}
 }
 
-static int pseries_dedicated_idle(void)
-{
-	long oldval;
+static void pseries_dedicated_idle(void)
+{ 
 	struct paca_struct *lpaca = get_paca();
 	unsigned int cpu = smp_processor_id();
 	unsigned long start_snooze;
 	unsigned long *smt_snooze_delay = &__get_cpu_var(smt_snooze_delay);
+	set_thread_flag(TIF_POLLING_NRFLAG);
 
 	while (1) {
 		/*
@@ -503,11 +503,8 @@ static int pseries_dedicated_idle(void)
 		 */
 		lpaca->lppaca.idle = 1;
 
-		oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED);
-		if (!oldval) {
-			set_thread_flag(TIF_POLLING_NRFLAG);
-
-			start_snooze = __get_tb() +
+		if (!need_resched()) {
+			start_snooze = get_tb() +
 				*smt_snooze_delay * tb_ticks_per_usec;
 
 			while (!need_resched() && !cpu_is_offline(cpu)) {
@@ -521,7 +518,7 @@ static int pseries_dedicated_idle(void)
 				HMT_very_low();
 
 				if (*smt_snooze_delay != 0 &&
-				    __get_tb() > start_snooze) {
+				    get_tb() > start_snooze) {
 					HMT_medium();
 					dedicated_idle_sleep(cpu);
 				}
@@ -529,22 +526,21 @@ static int pseries_dedicated_idle(void)
 			}
 
 			HMT_medium();
-			clear_thread_flag(TIF_POLLING_NRFLAG);
-		} else {
-			set_need_resched();
 		}
 
 		lpaca->lppaca.idle = 0;
 		ppc64_runlatch_on();
 
+		preempt_enable_no_resched();
 		schedule();
+		preempt_disable();
 
 		if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING)
 			cpu_die();
 	}
 }
 
-static int pseries_shared_idle(void)
+static void pseries_shared_idle(void)
 {
 	struct paca_struct *lpaca = get_paca();
 	unsigned int cpu = smp_processor_id();
@@ -581,27 +577,48 @@ static int pseries_shared_idle(void)
 		lpaca->lppaca.idle = 0;
 		ppc64_runlatch_on();
 
+		preempt_enable_no_resched();
 		schedule();
+		preempt_disable();
 
 		if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING)
 			cpu_die();
 	}
-
-	return 0;
 }
 
 static int pSeries_pci_probe_mode(struct pci_bus *bus)
 {
-	if (systemcfg->platform & PLATFORM_LPAR)
+	if (platform_is_lpar())
 		return PCI_PROBE_DEVTREE;
 	return PCI_PROBE_NORMAL;
 }
 
+#ifdef CONFIG_KEXEC
+static void pseries_kexec_cpu_down(int crash_shutdown, int secondary)
+{
+	/* Don't risk a hypervisor call if we're crashing */
+	if (!crash_shutdown) {
+		unsigned long vpa = __pa(&get_paca()->lppaca);
+
+		if (unregister_vpa(hard_smp_processor_id(), vpa)) {
+			printk("VPA deregistration of cpu %u (hw_cpu_id %d) "
+					"failed\n", smp_processor_id(),
+					hard_smp_processor_id());
+		}
+	}
+
+	if (ppc64_interrupt_controller == IC_OPEN_PIC)
+		mpic_teardown_this_cpu(secondary);
+	else
+		xics_teardown_cpu(secondary);
+}
+#endif
+
 struct machdep_calls __initdata pSeries_md = {
 	.probe			= pSeries_probe,
 	.setup_arch		= pSeries_setup_arch,
 	.init_early		= pSeries_init_early,
-	.get_cpuinfo		= pSeries_get_cpuinfo,
+	.show_cpuinfo		= pSeries_show_cpuinfo,
 	.log_error		= pSeries_log_error,
 	.pcibios_fixup		= pSeries_final_fixup,
 	.pci_probe_mode		= pSeries_pci_probe_mode,
@@ -619,4 +636,7 @@ struct machdep_calls __initdata pSeries_md = {
 	.check_legacy_ioport	= pSeries_check_legacy_ioport,
 	.system_reset_exception = pSeries_system_reset_exception,
 	.machine_check_exception = pSeries_machine_check_exception,
+#ifdef CONFIG_KEXEC
+	.kexec_cpu_down		= pseries_kexec_cpu_down,
+#endif
 };
diff --git a/arch/ppc64/kernel/pSeries_smp.c b/arch/powerpc/platforms/pseries/smp.c
index d2c7e2c4733b..25181c594d73 100644
--- a/arch/ppc64/kernel/pSeries_smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -1,5 +1,5 @@
 /*
- * SMP support for pSeries and BPA machines.
+ * SMP support for pSeries machines.
  *
  * Dave Engebretsen, Peter Bergner, and
  * Mike Corrigan {engebret|bergner|mikec}@us.ibm.com
@@ -39,18 +39,19 @@
 #include <asm/paca.h>
 #include <asm/time.h>
 #include <asm/machdep.h>
-#include <asm/xics.h>
+#include "xics.h"
 #include <asm/cputable.h>
 #include <asm/firmware.h>
 #include <asm/system.h>
 #include <asm/rtas.h>
-#include <asm/plpar_wrappers.h>
 #include <asm/pSeries_reconfig.h>
+#include <asm/mpic.h>
+#include <asm/vdso_datapage.h>
 
-#include "mpic.h"
-#include "bpa_iic.h"
+#include "plpar_wrappers.h"
 
 #ifdef DEBUG
+#include <asm/udbg.h>
 #define DBG(fmt...) udbg_printf(fmt)
 #else
 #define DBG(fmt...)
@@ -97,7 +98,7 @@ int pSeries_cpu_disable(void)
 	int cpu = smp_processor_id();
 
 	cpu_clear(cpu, cpu_online_map);
-	systemcfg->processorCount--;
+	vdso_data->processorCount--;
 
 	/*fix boot_cpuid here*/
 	if (cpu == boot_cpuid)
@@ -343,36 +344,6 @@ static void __devinit smp_xics_setup_cpu(int cpu)
 
 }
 #endif /* CONFIG_XICS */
-#ifdef CONFIG_BPA_IIC
-static void smp_iic_message_pass(int target, int msg)
-{
-	unsigned int i;
-
-	if (target < NR_CPUS) {
-		iic_cause_IPI(target, msg);
-	} else {
-		for_each_online_cpu(i) {
-			if (target == MSG_ALL_BUT_SELF
-			    && i == smp_processor_id())
-				continue;
-			iic_cause_IPI(i, msg);
-		}
-	}
-}
-
-static int __init smp_iic_probe(void)
-{
-	iic_request_IPIs();
-
-	return cpus_weight(cpu_possible_map);
-}
-
-static void __devinit smp_iic_setup_cpu(int cpu)
-{
-	if (cpu != boot_cpuid)
-		iic_setup_cpu();
-}
-#endif /* CONFIG_BPA_IIC */
 
 static DEFINE_SPINLOCK(timebase_lock);
 static unsigned long timebase = 0;
@@ -444,15 +415,6 @@ static struct smp_ops_t pSeries_xics_smp_ops = {
 	.cpu_bootable	= smp_pSeries_cpu_bootable,
 };
 #endif
-#ifdef CONFIG_BPA_IIC
-static struct smp_ops_t bpa_iic_smp_ops = {
-	.message_pass	= smp_iic_message_pass,
-	.probe		= smp_iic_probe,
-	.kick_cpu	= smp_pSeries_kick_cpu,
-	.setup_cpu	= smp_iic_setup_cpu,
-	.cpu_bootable	= smp_pSeries_cpu_bootable,
-};
-#endif
 
 /* This is called very early */
 void __init smp_init_pSeries(void)
@@ -472,11 +434,6 @@ void __init smp_init_pSeries(void)
 		smp_ops = &pSeries_xics_smp_ops;
 		break;
 #endif
-#ifdef CONFIG_BPA_IIC
-	case IC_BPA_IIC:
-		smp_ops = &bpa_iic_smp_ops;
-		break;
-#endif
 	default:
 		panic("Invalid interrupt controller");
 	}
@@ -486,7 +443,7 @@ void __init smp_init_pSeries(void)
 	smp_ops->cpu_die = pSeries_cpu_die;
 
 	/* Processors can be added/removed only on LPAR */
-	if (systemcfg->platform == PLATFORM_PSERIES_LPAR)
+	if (platform_is_lpar())
 		pSeries_reconfig_notifier_register(&pSeries_smp_nb);
 #endif
 
diff --git a/arch/ppc64/kernel/pSeries_vio.c b/arch/powerpc/platforms/pseries/vio.c
index e0ae06f58f86..866379b80c09 100644
--- a/arch/ppc64/kernel/pSeries_vio.c
+++ b/arch/powerpc/platforms/pseries/vio.c
@@ -22,6 +22,7 @@
 #include <asm/prom.h>
 #include <asm/vio.h>
 #include <asm/hvcall.h>
+#include <asm/tce.h>
 
 extern struct subsystem devices_subsys; /* needed for vio_find_name() */
 
diff --git a/arch/ppc64/kernel/xics.c b/arch/powerpc/platforms/pseries/xics.c
index daf93885dcfa..72ac18067ece 100644
--- a/arch/ppc64/kernel/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -1,5 +1,5 @@
-/* 
- * arch/ppc64/kernel/xics.c
+/*
+ * arch/powerpc/platforms/pseries/xics.c
  *
  * Copyright 2000 IBM Corporation.
  *
@@ -25,11 +25,11 @@
 #include <asm/pgtable.h>
 #include <asm/smp.h>
 #include <asm/rtas.h>
-#include <asm/xics.h>
 #include <asm/hvcall.h>
 #include <asm/machdep.h>
+#include <asm/i8259.h>
 
-#include "i8259.h"
+#include "xics.h"
 
 static unsigned int xics_startup(unsigned int irq);
 static void xics_enable_irq(unsigned int irq);
@@ -62,7 +62,7 @@ static struct radix_tree_root irq_map = RADIX_TREE_INIT(GFP_ATOMIC);
 /* Want a priority other than 0.  Various HW issues require this. */
 #define	DEFAULT_PRIORITY	5
 
-/* 
+/*
  * Mark IPIs as higher priority so we can take them inside interrupts that
  * arent marked SA_INTERRUPT
  */
@@ -169,11 +169,11 @@ static inline long plpar_xirr(unsigned long *xirr_ret)
 static int pSeriesLP_xirr_info_get(int n_cpu)
 {
 	unsigned long lpar_rc;
-	unsigned long return_value; 
+	unsigned long return_value;
 
 	lpar_rc = plpar_xirr(&return_value);
 	if (lpar_rc != H_Success)
-		panic(" bad return code xirr - rc = %lx \n", lpar_rc); 
+		panic(" bad return code xirr - rc = %lx \n", lpar_rc);
 	return (int)return_value;
 }
 
@@ -185,7 +185,7 @@ static void pSeriesLP_xirr_info_set(int n_cpu, int value)
 	lpar_rc = plpar_eoi(val64);
 	if (lpar_rc != H_Success)
 		panic("bad return code EOI - rc = %ld, value=%lx\n", lpar_rc,
-		      val64); 
+		      val64);
 }
 
 void pSeriesLP_cppr_info(int n_cpu, u8 value)
@@ -194,7 +194,7 @@ void pSeriesLP_cppr_info(int n_cpu, u8 value)
 
 	lpar_rc = plpar_cppr(value);
 	if (lpar_rc != H_Success)
-		panic("bad return code cppr - rc = %lx\n", lpar_rc); 
+		panic("bad return code cppr - rc = %lx\n", lpar_rc);
 }
 
 static void pSeriesLP_qirr_info(int n_cpu , u8 value)
@@ -203,7 +203,7 @@ static void pSeriesLP_qirr_info(int n_cpu , u8 value)
 
 	lpar_rc = plpar_ipi(get_hard_smp_processor_id(n_cpu), value);
 	if (lpar_rc != H_Success)
-		panic("bad return code qirr - rc = %lx\n", lpar_rc); 
+		panic("bad return code qirr - rc = %lx\n", lpar_rc);
 }
 
 xics_ops pSeriesLP_ops = {
@@ -366,7 +366,7 @@ int xics_get_irq(struct pt_regs *regs)
 
 	/* for sanity, this had better be < NR_IRQS - 16 */
 	if (vec == xics_irq_8259_cascade_real) {
-		irq = i8259_irq(cpu);
+		irq = i8259_irq(regs);
 		if (irq == -1) {
 			/* Spurious cascaded interrupt.  Still must ack xics */
 			xics_end_irq(irq_offset_up(xics_irq_8259_cascade));
@@ -462,7 +462,7 @@ void xics_init_IRQ(void)
 	struct xics_interrupt_node {
 		unsigned long addr;
 		unsigned long size;
-	} intnodes[NR_CPUS]; 
+	} intnodes[NR_CPUS];
 
 	ppc64_boot_msg(0x20, "XICS Init");
 
@@ -487,7 +487,7 @@ nextnode:
 	ireg = (uint *)get_property(np, "reg", &ilen);
 	if (!ireg)
 		panic("xics_init_IRQ: can't find interrupt reg property");
-	
+
 	while (ilen) {
 		intnodes[indx].addr = (unsigned long)*ireg++ << 32;
 		ilen -= sizeof(uint);
@@ -545,7 +545,9 @@ nextnode:
 		of_node_put(np);
 	}
 
-	if (systemcfg->platform == PLATFORM_PSERIES) {
+	if (platform_is_lpar())
+		ops = &pSeriesLP_ops;
+	else {
 #ifdef CONFIG_SMP
 		for_each_cpu(i) {
 			int hard_id;
@@ -555,18 +557,17 @@ nextnode:
 				continue;
 
 			hard_id = get_hard_smp_processor_id(i);
-			xics_per_cpu[i] = ioremap(intnodes[hard_id].addr, 
+			xics_per_cpu[i] = ioremap(intnodes[hard_id].addr,
 						  intnodes[hard_id].size);
 		}
 #else
 		xics_per_cpu[0] = ioremap(intr_base, intr_size);
 #endif /* CONFIG_SMP */
-	} else if (systemcfg->platform == PLATFORM_PSERIES_LPAR) {
-		ops = &pSeriesLP_ops;
 	}
 
 	xics_8259_pic.enable = i8259_pic.enable;
 	xics_8259_pic.disable = i8259_pic.disable;
+	xics_8259_pic.end = i8259_pic.end;
 	for (i = 0; i < 16; ++i)
 		get_irq_desc(i)->handler = &xics_8259_pic;
 	for (; i < NR_IRQS; ++i)
@@ -589,7 +590,7 @@ static int __init xics_setup_i8259(void)
 				no_action, 0, "8259 cascade", NULL))
 			printk(KERN_ERR "xics_setup_i8259: couldn't get 8259 "
 					"cascade\n");
-		i8259_init(0);
+		i8259_init(0, 0);
 	}
 	return 0;
 }
diff --git a/arch/powerpc/platforms/pseries/xics.h b/arch/powerpc/platforms/pseries/xics.h
new file mode 100644
index 000000000000..e14c70868f1d
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/xics.h
@@ -0,0 +1,34 @@
+/*
+ * arch/powerpc/platforms/pseries/xics.h
+ *
+ * Copyright 2000 IBM Corporation.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _POWERPC_KERNEL_XICS_H
+#define _POWERPC_KERNEL_XICS_H
+
+#include <linux/cache.h>
+
+void xics_init_IRQ(void);
+int xics_get_irq(struct pt_regs *);
+void xics_setup_cpu(void);
+void xics_teardown_cpu(int secondary);
+void xics_cause_IPI(int cpu);
+void xics_request_IPIs(void);
+void xics_migrate_irqs_away(void);
+
+/* first argument is ignored for now*/
+void pSeriesLP_cppr_info(int n_cpu, u8 value);
+
+struct xics_ipi_struct {
+	volatile unsigned long value;
+} ____cacheline_aligned;
+
+extern struct xics_ipi_struct xics_ipi_message[NR_CPUS] __cacheline_aligned;
+
+#endif /* _POWERPC_KERNEL_XICS_H */
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
new file mode 100644
index 000000000000..6b7efcfc352a
--- /dev/null
+++ b/arch/powerpc/sysdev/Makefile
@@ -0,0 +1,8 @@
+obj-$(CONFIG_MPIC)		+= mpic.o
+obj-$(CONFIG_PPC_INDIRECT_PCI)	+= indirect_pci.o
+obj-$(CONFIG_PPC_I8259)		+= i8259.o
+obj-$(CONFIG_PPC_MPC106)	+= grackle.o
+obj-$(CONFIG_BOOKE)		+= dcr.o
+obj-$(CONFIG_40x)		+= dcr.o
+obj-$(CONFIG_U3_DART)		+= u3_iommu.o
+obj-$(CONFIG_MMIO_NVRAM)	+= mmio_nvram.o
diff --git a/arch/powerpc/sysdev/dart.h b/arch/powerpc/sysdev/dart.h
new file mode 100644
index 000000000000..33ed9ed7fc1e
--- /dev/null
+++ b/arch/powerpc/sysdev/dart.h
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _POWERPC_SYSDEV_DART_H
+#define _POWERPC_SYSDEV_DART_H
+
+
+/* physical base of DART registers */
+#define DART_BASE        0xf8033000UL
+
+/* Offset from base to control register */
+#define DARTCNTL   0
+/* Offset from base to exception register */
+#define DARTEXCP   0x10
+/* Offset from base to TLB tag registers */
+#define DARTTAG    0x1000
+
+
+/* Control Register fields */
+
+/* base address of table (pfn) */
+#define DARTCNTL_BASE_MASK    0xfffff
+#define DARTCNTL_BASE_SHIFT   12
+
+#define DARTCNTL_FLUSHTLB     0x400
+#define DARTCNTL_ENABLE       0x200
+
+/* size of table in pages */
+#define DARTCNTL_SIZE_MASK    0x1ff
+#define DARTCNTL_SIZE_SHIFT   0
+
+
+/* DART table fields */
+
+#define DARTMAP_VALID   0x80000000
+#define DARTMAP_RPNMASK 0x00ffffff
+
+
+#define DART_PAGE_SHIFT		12
+#define DART_PAGE_SIZE		(1 << DART_PAGE_SHIFT)
+#define DART_PAGE_FACTOR	(PAGE_SHIFT - DART_PAGE_SHIFT)
+
+
+#endif /* _POWERPC_SYSDEV_DART_H */
diff --git a/arch/ppc/syslib/dcr.S b/arch/powerpc/sysdev/dcr.S
index 895f10243a43..895f10243a43 100644
--- a/arch/ppc/syslib/dcr.S
+++ b/arch/powerpc/sysdev/dcr.S
diff --git a/arch/powerpc/sysdev/grackle.c b/arch/powerpc/sysdev/grackle.c
new file mode 100644
index 000000000000..b6ec793a23be
--- /dev/null
+++ b/arch/powerpc/sysdev/grackle.c
@@ -0,0 +1,64 @@
+/*
+ * Functions for setting up and using a MPC106 northbridge
+ * Extracted from arch/powerpc/platforms/powermac/pci.c.
+ *
+ * Copyright (C) 2003 Benjamin Herrenschmuidt (benh@kernel.crashing.org)
+ * Copyright (C) 1997 Paul Mackerras (paulus@samba.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/grackle.h>
+
+#define GRACKLE_CFA(b, d, o)	(0x80 | ((b) << 8) | ((d) << 16) \
+				 | (((o) & ~3) << 24))
+
+#define GRACKLE_PICR1_STG		0x00000040
+#define GRACKLE_PICR1_LOOPSNOOP		0x00000010
+
+/* N.B. this is called before bridges is initialized, so we can't
+   use grackle_pcibios_{read,write}_config_dword. */
+static inline void grackle_set_stg(struct pci_controller* bp, int enable)
+{
+	unsigned int val;
+
+	out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8));
+	val = in_le32(bp->cfg_data);
+	val = enable? (val | GRACKLE_PICR1_STG) :
+		(val & ~GRACKLE_PICR1_STG);
+	out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8));
+	out_le32(bp->cfg_data, val);
+	(void)in_le32(bp->cfg_data);
+}
+
+static inline void grackle_set_loop_snoop(struct pci_controller *bp, int enable)
+{
+	unsigned int val;
+
+	out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8));
+	val = in_le32(bp->cfg_data);
+	val = enable? (val | GRACKLE_PICR1_LOOPSNOOP) :
+		(val & ~GRACKLE_PICR1_LOOPSNOOP);
+	out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8));
+	out_le32(bp->cfg_data, val);
+	(void)in_le32(bp->cfg_data);
+}
+
+void __init setup_grackle(struct pci_controller *hose)
+{
+	setup_indirect_pci(hose, 0xfec00000, 0xfee00000);
+	if (machine_is_compatible("AAPL,PowerBook1998"))
+		grackle_set_loop_snoop(hose, 1);
+#if 0	/* Disabled for now, HW problems ??? */
+	grackle_set_stg(hose, 1);
+#endif
+}
diff --git a/arch/ppc/syslib/i8259.c b/arch/powerpc/sysdev/i8259.c
index 5c7908c20e43..b7ac32fdd776 100644
--- a/arch/ppc/syslib/i8259.c
+++ b/arch/powerpc/sysdev/i8259.c
@@ -1,18 +1,26 @@
+/*
+ * i8259 interrupt controller driver.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
 #include <asm/io.h>
 #include <asm/i8259.h>
 
-static volatile unsigned char *pci_intack; /* RO, gives us the irq vector */
+static volatile void __iomem *pci_intack; /* RO, gives us the irq vector */
 
-unsigned char cached_8259[2] = { 0xff, 0xff };
+static unsigned char cached_8259[2] = { 0xff, 0xff };
 #define cached_A1 (cached_8259[0])
 #define cached_21 (cached_8259[1])
 
 static DEFINE_SPINLOCK(i8259_lock);
 
-int i8259_pic_irq_offset;
+static int i8259_pic_irq_offset;
 
 /*
  * Acknowledge the IRQ using either the PCI host bridge's interrupt
@@ -20,8 +28,7 @@ int i8259_pic_irq_offset;
  * which is called.  It should be noted that polling is broken on some
  * IBM and Motorola PReP boxes so we must use the int-ack feature on them.
  */
-int
-i8259_irq(struct pt_regs *regs)
+int i8259_irq(struct pt_regs *regs)
 {
 	int irq;
 
@@ -29,7 +36,7 @@ i8259_irq(struct pt_regs *regs)
 
 	/* Either int-ack or poll for the IRQ */
 	if (pci_intack)
-		irq = *pci_intack;
+		irq = readb(pci_intack);
 	else {
 		/* Perform an interrupt acknowledge cycle on controller 1. */
 		outb(0x0C, 0x20);		/* prepare for poll */
@@ -59,7 +66,12 @@ i8259_irq(struct pt_regs *regs)
 	}
 
 	spin_unlock(&i8259_lock);
-	return irq;
+	return irq + i8259_pic_irq_offset;
+}
+
+int i8259_irq_cascade(struct pt_regs *regs, void *unused)
+{
+	return i8259_irq(regs);
 }
 
 static void i8259_mask_and_ack_irq(unsigned int irq_nr)
@@ -67,20 +79,18 @@ static void i8259_mask_and_ack_irq(unsigned int irq_nr)
 	unsigned long flags;
 
 	spin_lock_irqsave(&i8259_lock, flags);
-	if ( irq_nr >= i8259_pic_irq_offset )
-		irq_nr -= i8259_pic_irq_offset;
-
+	irq_nr -= i8259_pic_irq_offset;
 	if (irq_nr > 7) {
 		cached_A1 |= 1 << (irq_nr-8);
-		inb(0xA1); /* DUMMY */
-		outb(cached_A1,0xA1);
-		outb(0x20,0xA0); /* Non-specific EOI */
-		outb(0x20,0x20); /* Non-specific EOI to cascade */
+		inb(0xA1); 	/* DUMMY */
+		outb(cached_A1, 0xA1);
+		outb(0x20, 0xA0);	/* Non-specific EOI */
+		outb(0x20, 0x20);	/* Non-specific EOI to cascade */
 	} else {
 		cached_21 |= 1 << irq_nr;
-		inb(0x21); /* DUMMY */
-		outb(cached_21,0x21);
-		outb(0x20,0x20); /* Non-specific EOI */
+		inb(0x21); 	/* DUMMY */
+		outb(cached_21, 0x21);
+		outb(0x20, 0x20);	/* Non-specific EOI */
 	}
 	spin_unlock_irqrestore(&i8259_lock, flags);
 }
@@ -96,9 +106,8 @@ static void i8259_mask_irq(unsigned int irq_nr)
 	unsigned long flags;
 
 	spin_lock_irqsave(&i8259_lock, flags);
-	if ( irq_nr >= i8259_pic_irq_offset )
-		irq_nr -= i8259_pic_irq_offset;
-	if ( irq_nr < 8 )
+	irq_nr -= i8259_pic_irq_offset;
+	if (irq_nr < 8)
 		cached_21 |= 1 << irq_nr;
 	else
 		cached_A1 |= 1 << (irq_nr-8);
@@ -111,9 +120,8 @@ static void i8259_unmask_irq(unsigned int irq_nr)
 	unsigned long flags;
 
 	spin_lock_irqsave(&i8259_lock, flags);
-	if ( irq_nr >= i8259_pic_irq_offset )
-		irq_nr -= i8259_pic_irq_offset;
-	if ( irq_nr < 8 )
+	irq_nr -= i8259_pic_irq_offset;
+	if (irq_nr < 8)
 		cached_21 &= ~(1 << irq_nr);
 	else
 		cached_A1 &= ~(1 << (irq_nr-8));
@@ -169,12 +177,14 @@ static struct irqaction i8259_irqaction = {
  * intack_addr - PCI interrupt acknowledge (real) address which will return
  *               the active irq from the 8259
  */
-void __init
-i8259_init(long intack_addr)
+void __init i8259_init(unsigned long intack_addr, int offset)
 {
 	unsigned long flags;
+	int i;
 
 	spin_lock_irqsave(&i8259_lock, flags);
+	i8259_pic_irq_offset = offset;
+
 	/* init master interrupt controller */
 	outb(0x11, 0x20); /* Start init sequence */
 	outb(0x00, 0x21); /* Vector base */
@@ -197,12 +207,16 @@ i8259_init(long intack_addr)
 
 	spin_unlock_irqrestore(&i8259_lock, flags);
 
+	for (i = 0; i < NUM_ISA_INTERRUPTS; ++i)
+		irq_desc[offset + i].handler = &i8259_pic;
+
 	/* reserve our resources */
-	setup_irq( i8259_pic_irq_offset + 2, &i8259_irqaction);
+	setup_irq(offset + 2, &i8259_irqaction);
 	request_resource(&ioport_resource, &pic1_iores);
 	request_resource(&ioport_resource, &pic2_iores);
 	request_resource(&ioport_resource, &pic_edgectrl_iores);
 
 	if (intack_addr != 0)
 		pci_intack = ioremap(intack_addr, 1);
+
 }
diff --git a/arch/ppc/syslib/indirect_pci.c b/arch/powerpc/sysdev/indirect_pci.c
index e71488469704..e71488469704 100644
--- a/arch/ppc/syslib/indirect_pci.c
+++ b/arch/powerpc/sysdev/indirect_pci.c
diff --git a/arch/ppc64/kernel/bpa_nvram.c b/arch/powerpc/sysdev/mmio_nvram.c
index 06a119cfceb5..74e0d31a3559 100644
--- a/arch/ppc64/kernel/bpa_nvram.c
+++ b/arch/powerpc/sysdev/mmio_nvram.c
@@ -1,5 +1,5 @@
 /*
- * NVRAM for CPBW
+ * memory mapped NVRAM
  *
  * (C) Copyright IBM Corp. 2005
  *
@@ -30,54 +30,54 @@
 #include <asm/nvram.h>
 #include <asm/prom.h>
 
-static void __iomem *bpa_nvram_start;
-static long bpa_nvram_len;
-static spinlock_t bpa_nvram_lock = SPIN_LOCK_UNLOCKED;
+static void __iomem *mmio_nvram_start;
+static long mmio_nvram_len;
+static spinlock_t mmio_nvram_lock = SPIN_LOCK_UNLOCKED;
 
-static ssize_t bpa_nvram_read(char *buf, size_t count, loff_t *index)
+static ssize_t mmio_nvram_read(char *buf, size_t count, loff_t *index)
 {
 	unsigned long flags;
 
-	if (*index >= bpa_nvram_len)
+	if (*index >= mmio_nvram_len)
 		return 0;
-	if (*index + count > bpa_nvram_len)
-		count = bpa_nvram_len - *index;
+	if (*index + count > mmio_nvram_len)
+		count = mmio_nvram_len - *index;
 
-	spin_lock_irqsave(&bpa_nvram_lock, flags);
+	spin_lock_irqsave(&mmio_nvram_lock, flags);
 
-	memcpy_fromio(buf, bpa_nvram_start + *index, count);
+	memcpy_fromio(buf, mmio_nvram_start + *index, count);
 
-	spin_unlock_irqrestore(&bpa_nvram_lock, flags);
+	spin_unlock_irqrestore(&mmio_nvram_lock, flags);
 	
 	*index += count;
 	return count;
 }
 
-static ssize_t bpa_nvram_write(char *buf, size_t count, loff_t *index)
+static ssize_t mmio_nvram_write(char *buf, size_t count, loff_t *index)
 {
 	unsigned long flags;
 
-	if (*index >= bpa_nvram_len)
+	if (*index >= mmio_nvram_len)
 		return 0;
-	if (*index + count > bpa_nvram_len)
-		count = bpa_nvram_len - *index;
+	if (*index + count > mmio_nvram_len)
+		count = mmio_nvram_len - *index;
 
-	spin_lock_irqsave(&bpa_nvram_lock, flags);
+	spin_lock_irqsave(&mmio_nvram_lock, flags);
 
-	memcpy_toio(bpa_nvram_start + *index, buf, count);
+	memcpy_toio(mmio_nvram_start + *index, buf, count);
 
-	spin_unlock_irqrestore(&bpa_nvram_lock, flags);
+	spin_unlock_irqrestore(&mmio_nvram_lock, flags);
 	
 	*index += count;
 	return count;
 }
 
-static ssize_t bpa_nvram_get_size(void)
+static ssize_t mmio_nvram_get_size(void)
 {
-	return bpa_nvram_len;
+	return mmio_nvram_len;
 }
 
-int __init bpa_nvram_init(void)
+int __init mmio_nvram_init(void)
 {
 	struct device_node *nvram_node;
 	unsigned long *buffer;
@@ -97,20 +97,20 @@ int __init bpa_nvram_init(void)
 
 	ret = -ENODEV;
 	nvram_addr = buffer[0];
-	bpa_nvram_len = buffer[1];
-	if ( (!bpa_nvram_len) || (!nvram_addr) )
+	mmio_nvram_len = buffer[1];
+	if ( (!mmio_nvram_len) || (!nvram_addr) )
 		goto out;
 
-	bpa_nvram_start = ioremap(nvram_addr, bpa_nvram_len);
-	if (!bpa_nvram_start)
+	mmio_nvram_start = ioremap(nvram_addr, mmio_nvram_len);
+	if (!mmio_nvram_start)
 		goto out;
 
-	printk(KERN_INFO "BPA NVRAM, %luk mapped to %p\n",
-	       bpa_nvram_len >> 10, bpa_nvram_start);
+	printk(KERN_INFO "mmio NVRAM, %luk mapped to %p\n",
+	       mmio_nvram_len >> 10, mmio_nvram_start);
 
-	ppc_md.nvram_read	= bpa_nvram_read;
-	ppc_md.nvram_write	= bpa_nvram_write;
-	ppc_md.nvram_size	= bpa_nvram_get_size;
+	ppc_md.nvram_read	= mmio_nvram_read;
+	ppc_md.nvram_write	= mmio_nvram_write;
+	ppc_md.nvram_size	= mmio_nvram_get_size;
 
 out:
 	of_node_put(nvram_node);
diff --git a/arch/ppc64/kernel/mpic.c b/arch/powerpc/sysdev/mpic.c
index cc262a05ddb4..58d1cc2023c8 100644
--- a/arch/ppc64/kernel/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -1,5 +1,5 @@
 /*
- *  arch/ppc64/kernel/mpic.c
+ *  arch/powerpc/kernel/mpic.c
  *
  *  Driver for interrupt controllers following the OpenPIC standard, the
  *  common implementation beeing IBM's MPIC. This driver also can deal
@@ -31,8 +31,8 @@
 #include <asm/pgtable.h>
 #include <asm/irq.h>
 #include <asm/machdep.h>
-
-#include "mpic.h"
+#include <asm/mpic.h>
+#include <asm/smp.h>
 
 #ifdef DEBUG
 #define DBG(fmt...) printk(fmt)
@@ -44,6 +44,9 @@ static struct mpic *mpics;
 static struct mpic *mpic_primary;
 static DEFINE_SPINLOCK(mpic_lock);
 
+#ifdef CONFIG_PPC32	/* XXX for now */
+#define distribute_irqs	CONFIG_IRQ_ALL_CPUS
+#endif
 
 /*
  * Register accessor functions
@@ -355,10 +358,11 @@ static void mpic_enable_irq(unsigned int irq)
 	struct mpic *mpic = mpic_from_irq(irq);
 	unsigned int src = irq - mpic->irq_offset;
 
-	DBG("%s: enable_irq: %d (src %d)\n", mpic->name, irq, src);
+	DBG("%p: %s: enable_irq: %d (src %d)\n", mpic, mpic->name, irq, src);
 
 	mpic_irq_write(src, MPIC_IRQ_VECTOR_PRI,
-		       mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & ~MPIC_VECPRI_MASK);
+		       mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) &
+		       ~MPIC_VECPRI_MASK);
 
 	/* make sure mask gets to controller before we return to user */
 	do {
@@ -378,7 +382,8 @@ static void mpic_disable_irq(unsigned int irq)
 	DBG("%s: disable_irq: %d (src %d)\n", mpic->name, irq, src);
 
 	mpic_irq_write(src, MPIC_IRQ_VECTOR_PRI,
-		       mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) | MPIC_VECPRI_MASK);
+		       mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) |
+		       MPIC_VECPRI_MASK);
 
 	/* make sure mask gets to controller before we return to user */
 	do {
@@ -480,6 +485,7 @@ struct mpic * __init mpic_alloc(unsigned long phys_addr,
 	if (mpic == NULL)
 		return NULL;
 	
+
 	memset(mpic, 0, sizeof(struct mpic));
 	mpic->name = name;
 
@@ -507,7 +513,7 @@ struct mpic * __init mpic_alloc(unsigned long phys_addr,
 
 	/* Map the global registers */
 	mpic->gregs = ioremap(phys_addr + MPIC_GREG_BASE, 0x1000);
-	mpic->tmregs = mpic->gregs + (MPIC_TIMER_BASE >> 2);
+	mpic->tmregs = mpic->gregs + ((MPIC_TIMER_BASE - MPIC_GREG_BASE) >> 2);
 	BUG_ON(mpic->gregs == NULL);
 
 	/* Reset */
@@ -644,7 +650,6 @@ void __init mpic_init(struct mpic *mpic)
 			continue;
 		irq_desc[mpic->ipi_offset+i].status |= IRQ_PER_CPU;
 		irq_desc[mpic->ipi_offset+i].handler = &mpic->hc_ipi;
-		
 #endif /* CONFIG_SMP */
 	}
 
@@ -700,7 +705,7 @@ void __init mpic_init(struct mpic *mpic)
 		/* init hw */
 		mpic_irq_write(i, MPIC_IRQ_VECTOR_PRI, vecpri);
 		mpic_irq_write(i, MPIC_IRQ_DESTINATION,
-			       1 << get_hard_smp_processor_id(boot_cpuid));
+			       1 << hard_smp_processor_id());
 
 		/* init linux descriptors */
 		if (i < mpic->irq_count) {
@@ -732,12 +737,13 @@ void mpic_irq_set_priority(unsigned int irq, unsigned int pri)
 
 	spin_lock_irqsave(&mpic_lock, flags);
 	if (is_ipi) {
-		reg = mpic_ipi_read(irq - mpic->ipi_offset) & MPIC_VECPRI_PRIORITY_MASK;
+		reg = mpic_ipi_read(irq - mpic->ipi_offset) &
+			~MPIC_VECPRI_PRIORITY_MASK;
 		mpic_ipi_write(irq - mpic->ipi_offset,
 			       reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT));
 	} else {
-		reg = mpic_irq_read(irq - mpic->irq_offset, MPIC_IRQ_VECTOR_PRI)
-			& MPIC_VECPRI_PRIORITY_MASK;
+		reg = mpic_irq_read(irq - mpic->irq_offset,MPIC_IRQ_VECTOR_PRI)
+			& ~MPIC_VECPRI_PRIORITY_MASK;
 		mpic_irq_write(irq - mpic->irq_offset, MPIC_IRQ_VECTOR_PRI,
 			       reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT));
 	}
@@ -792,6 +798,21 @@ void mpic_setup_this_cpu(void)
 #endif /* CONFIG_SMP */
 }
 
+int mpic_cpu_get_priority(void)
+{
+	struct mpic *mpic = mpic_primary;
+
+	return mpic_cpu_read(MPIC_CPU_CURRENT_TASK_PRI);
+}
+
+void mpic_cpu_set_priority(int prio)
+{
+	struct mpic *mpic = mpic_primary;
+
+	prio &= MPIC_CPU_TASKPRI_MASK;
+	mpic_cpu_write(MPIC_CPU_CURRENT_TASK_PRI, prio);
+}
+
 /*
  * XXX: someone who knows mpic should check this.
  * do we need to eoi the ipi including for kexec cpu here (see xics comments)?
@@ -885,4 +906,25 @@ void mpic_request_ipis(void)
 
 	printk("IPIs requested... \n");
 }
+
+void smp_mpic_message_pass(int target, int msg)
+{
+	/* make sure we're sending something that translates to an IPI */
+	if ((unsigned int)msg > 3) {
+		printk("SMP %d: smp_message_pass: unknown msg %d\n",
+		       smp_processor_id(), msg);
+		return;
+	}
+	switch (target) {
+	case MSG_ALL:
+		mpic_send_ipi(msg, 0xffffffff);
+		break;
+	case MSG_ALL_BUT_SELF:
+		mpic_send_ipi(msg, 0xffffffff & ~(1 << smp_processor_id()));
+		break;
+	default:
+		mpic_send_ipi(msg, 1 << target);
+		break;
+	}
+}
 #endif /* CONFIG_SMP */
diff --git a/arch/ppc64/kernel/u3_iommu.c b/arch/powerpc/sysdev/u3_iommu.c
index 41ea09cb9ac7..5c1a26a6d00c 100644
--- a/arch/ppc64/kernel/u3_iommu.c
+++ b/arch/powerpc/sysdev/u3_iommu.c
@@ -1,11 +1,11 @@
 /*
- * arch/ppc64/kernel/u3_iommu.c
+ * arch/powerpc/sysdev/u3_iommu.c
  *
- * Copyright (C) 2004 Olof Johansson <olof@austin.ibm.com>, IBM Corporation
+ * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
  *
  * Based on pSeries_iommu.c:
  * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
- * Copyright (C) 2004 Olof Johansson <olof@austin.ibm.com>, IBM Corporation
+ * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
  *
  * Dynamic DMA mapping support, Apple U3 & IBM CPC925 "DART" iommu.
  *
@@ -37,46 +37,18 @@
 #include <linux/vmalloc.h>
 #include <asm/io.h>
 #include <asm/prom.h>
-#include <asm/ppcdebug.h>
 #include <asm/iommu.h>
 #include <asm/pci-bridge.h>
 #include <asm/machdep.h>
 #include <asm/abs_addr.h>
 #include <asm/cacheflush.h>
 #include <asm/lmb.h>
+#include <asm/ppc-pci.h>
 
-#include "pci.h"
+#include "dart.h"
 
 extern int iommu_force_on;
 
-/* physical base of DART registers */
-#define DART_BASE        0xf8033000UL
-
-/* Offset from base to control register */
-#define DARTCNTL   0
-/* Offset from base to exception register */
-#define DARTEXCP   0x10
-/* Offset from base to TLB tag registers */
-#define DARTTAG    0x1000
-
-
-/* Control Register fields */
-
-/* base address of table (pfn) */
-#define DARTCNTL_BASE_MASK    0xfffff
-#define DARTCNTL_BASE_SHIFT   12
-
-#define DARTCNTL_FLUSHTLB     0x400
-#define DARTCNTL_ENABLE       0x200
-
-/* size of table in pages */
-#define DARTCNTL_SIZE_MASK    0x1ff
-#define DARTCNTL_SIZE_SHIFT   0
-
-/* DART table fields */
-#define DARTMAP_VALID   0x80000000
-#define DARTMAP_RPNMASK 0x00ffffff
-
 /* Physical base address and size of the DART table */
 unsigned long dart_tablebase; /* exported to htab_initialize */
 static unsigned long dart_tablesize;
@@ -152,18 +124,21 @@ static void dart_build(struct iommu_table *tbl, long index,
 
 	DBG("dart: build at: %lx, %lx, addr: %x\n", index, npages, uaddr);
 
+	index <<= DART_PAGE_FACTOR;
+	npages <<= DART_PAGE_FACTOR;
+
 	dp = ((unsigned int*)tbl->it_base) + index;
 	
 	/* On U3, all memory is contigous, so we can move this
 	 * out of the loop.
 	 */
 	while (npages--) {
-		rpn = virt_to_abs(uaddr) >> PAGE_SHIFT;
+		rpn = virt_to_abs(uaddr) >> DART_PAGE_SHIFT;
 
 		*(dp++) = DARTMAP_VALID | (rpn & DARTMAP_RPNMASK);
 
 		rpn++;
-		uaddr += PAGE_SIZE;
+		uaddr += DART_PAGE_SIZE;
 	}
 
 	dart_dirty = 1;
@@ -181,6 +156,9 @@ static void dart_free(struct iommu_table *tbl, long index, long npages)
 
 	DBG("dart: free at: %lx, %lx\n", index, npages);
 
+	index <<= DART_PAGE_FACTOR;
+	npages <<= DART_PAGE_FACTOR;
+
 	dp  = ((unsigned int *)tbl->it_base) + index;
 		
 	while (npages--)
@@ -209,10 +187,10 @@ static int dart_init(struct device_node *dart_node)
 	 * that to work around what looks like a problem with the HT bridge
 	 * prefetching into invalid pages and corrupting data
 	 */
-	tmp = lmb_alloc(PAGE_SIZE, PAGE_SIZE);
+	tmp = lmb_alloc(DART_PAGE_SIZE, DART_PAGE_SIZE);
 	if (!tmp)
 		panic("U3-DART: Cannot allocate spare page!");
-	dart_emptyval = DARTMAP_VALID | ((tmp >> PAGE_SHIFT) & DARTMAP_RPNMASK);
+	dart_emptyval = DARTMAP_VALID | ((tmp >> DART_PAGE_SHIFT) & DARTMAP_RPNMASK);
 
 	/* Map in DART registers. FIXME: Use device node to get base address */
 	dart = ioremap(DART_BASE, 0x7000);
@@ -223,8 +201,8 @@ static int dart_init(struct device_node *dart_node)
 	 * table size and enable bit
 	 */
 	regword = DARTCNTL_ENABLE | 
-		((dart_tablebase >> PAGE_SHIFT) << DARTCNTL_BASE_SHIFT) |
-		(((dart_tablesize >> PAGE_SHIFT) & DARTCNTL_SIZE_MASK)
+		((dart_tablebase >> DART_PAGE_SHIFT) << DARTCNTL_BASE_SHIFT) |
+		(((dart_tablesize >> DART_PAGE_SHIFT) & DARTCNTL_SIZE_MASK)
 				 << DARTCNTL_SIZE_SHIFT);
 	dart_vbase = ioremap(virt_to_abs(dart_tablebase), dart_tablesize);
 
@@ -248,7 +226,7 @@ static void iommu_table_u3_setup(void)
 	iommu_table_u3.it_busno = 0;
 	iommu_table_u3.it_offset = 0;
 	/* it_size is in number of entries */
-	iommu_table_u3.it_size = dart_tablesize / sizeof(u32);
+	iommu_table_u3.it_size = (dart_tablesize / sizeof(u32)) >> DART_PAGE_FACTOR;
 
 	/* Initialize the common IOMMU code */
 	iommu_table_u3.it_base = (unsigned long)dart_vbase;
diff --git a/arch/powerpc/xmon/Makefile b/arch/powerpc/xmon/Makefile
new file mode 100644
index 000000000000..b20312e5ed27
--- /dev/null
+++ b/arch/powerpc/xmon/Makefile
@@ -0,0 +1,11 @@
+# Makefile for xmon
+
+ifdef CONFIG_PPC64
+EXTRA_CFLAGS += -mno-minimal-toc
+endif
+
+obj-$(CONFIG_8xx)	+= start_8xx.o
+obj-$(CONFIG_6xx)	+= start_32.o
+obj-$(CONFIG_4xx)	+= start_32.o
+obj-$(CONFIG_PPC64)	+= start_64.o
+obj-y			+= xmon.o ppc-dis.o ppc-opc.o setjmp.o nonstdio.o
diff --git a/arch/ppc64/xmon/ansidecl.h b/arch/powerpc/xmon/ansidecl.h
index c9b9f0929e9e..c9b9f0929e9e 100644
--- a/arch/ppc64/xmon/ansidecl.h
+++ b/arch/powerpc/xmon/ansidecl.h
diff --git a/arch/powerpc/xmon/nonstdio.c b/arch/powerpc/xmon/nonstdio.c
new file mode 100644
index 000000000000..78765833f4c0
--- /dev/null
+++ b/arch/powerpc/xmon/nonstdio.c
@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) 1996-2005 Paul Mackerras.
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+#include <linux/string.h>
+#include <asm/time.h>
+#include "nonstdio.h"
+
+int xmon_putchar(int c)
+{
+	char ch = c;
+
+	if (c == '\n')
+		xmon_putchar('\r');
+	return xmon_write(&ch, 1) == 1? c: -1;
+}
+
+static char line[256];
+static char *lineptr;
+static int lineleft;
+
+int xmon_expect(const char *str, unsigned long timeout)
+{
+	int c;
+	unsigned long t0;
+
+	/* assume 25MHz default timebase if tb_ticks_per_sec not set yet */
+	timeout *= tb_ticks_per_sec? tb_ticks_per_sec: 25000000;
+	t0 = get_tbl();
+	do {
+		lineptr = line;
+		for (;;) {
+			c = xmon_read_poll();
+			if (c == -1) {
+				if (get_tbl() - t0 > timeout)
+					return 0;
+				continue;
+			}
+			if (c == '\n')
+				break;
+			if (c != '\r' && lineptr < &line[sizeof(line) - 1])
+				*lineptr++ = c;
+		}
+		*lineptr = 0;
+	} while (strstr(line, str) == NULL);
+	return 1;
+}
+
+int xmon_getchar(void)
+{
+	int c;
+
+	if (lineleft == 0) {
+		lineptr = line;
+		for (;;) {
+			c = xmon_readchar();
+			if (c == -1 || c == 4)
+				break;
+			if (c == '\r' || c == '\n') {
+				*lineptr++ = '\n';
+				xmon_putchar('\n');
+				break;
+			}
+			switch (c) {
+			case 0177:
+			case '\b':
+				if (lineptr > line) {
+					xmon_putchar('\b');
+					xmon_putchar(' ');
+					xmon_putchar('\b');
+					--lineptr;
+				}
+				break;
+			case 'U' & 0x1F:
+				while (lineptr > line) {
+					xmon_putchar('\b');
+					xmon_putchar(' ');
+					xmon_putchar('\b');
+					--lineptr;
+				}
+				break;
+			default:
+				if (lineptr >= &line[sizeof(line) - 1])
+					xmon_putchar('\a');
+				else {
+					xmon_putchar(c);
+					*lineptr++ = c;
+				}
+			}
+		}
+		lineleft = lineptr - line;
+		lineptr = line;
+	}
+	if (lineleft == 0)
+		return -1;
+	--lineleft;
+	return *lineptr++;
+}
+
+char *xmon_gets(char *str, int nb)
+{
+	char *p;
+	int c;
+
+	for (p = str; p < str + nb - 1; ) {
+		c = xmon_getchar();
+		if (c == -1) {
+			if (p == str)
+				return NULL;
+			break;
+		}
+		*p++ = c;
+		if (c == '\n')
+			break;
+	}
+	*p = 0;
+	return str;
+}
+
+void xmon_printf(const char *format, ...)
+{
+	va_list args;
+	int n;
+	static char xmon_outbuf[1024];
+
+	va_start(args, format);
+	n = vsnprintf(xmon_outbuf, sizeof(xmon_outbuf), format, args);
+	va_end(args);
+	xmon_write(xmon_outbuf, n);
+}
diff --git a/arch/powerpc/xmon/nonstdio.h b/arch/powerpc/xmon/nonstdio.h
new file mode 100644
index 000000000000..47cebbd2b1b1
--- /dev/null
+++ b/arch/powerpc/xmon/nonstdio.h
@@ -0,0 +1,14 @@
+#define EOF	(-1)
+
+#define printf	xmon_printf
+#define putchar	xmon_putchar
+
+extern int xmon_putchar(int c);
+extern int xmon_getchar(void);
+extern char *xmon_gets(char *, int);
+extern void xmon_printf(const char *, ...);
+extern void xmon_map_scc(void);
+extern int xmon_expect(const char *str, unsigned long timeout);
+extern int xmon_write(void *ptr, int nb);
+extern int xmon_readchar(void);
+extern int xmon_read_poll(void);
diff --git a/arch/ppc64/xmon/ppc-dis.c b/arch/powerpc/xmon/ppc-dis.c
index ac0a9d2427e0..ac0a9d2427e0 100644
--- a/arch/ppc64/xmon/ppc-dis.c
+++ b/arch/powerpc/xmon/ppc-dis.c
diff --git a/arch/ppc64/xmon/ppc-opc.c b/arch/powerpc/xmon/ppc-opc.c
index 5ee8fc32f824..5ee8fc32f824 100644
--- a/arch/ppc64/xmon/ppc-opc.c
+++ b/arch/powerpc/xmon/ppc-opc.c
diff --git a/arch/ppc64/xmon/ppc.h b/arch/powerpc/xmon/ppc.h
index 342237e8dd69..342237e8dd69 100644
--- a/arch/ppc64/xmon/ppc.h
+++ b/arch/powerpc/xmon/ppc.h
diff --git a/arch/powerpc/xmon/setjmp.S b/arch/powerpc/xmon/setjmp.S
new file mode 100644
index 000000000000..96a91f10e2ec
--- /dev/null
+++ b/arch/powerpc/xmon/setjmp.S
@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) 1996 Paul Mackerras.
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ *
+ * NOTE: assert(sizeof(buf) > 23 * sizeof(long))
+ */
+#include <asm/processor.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+
+_GLOBAL(xmon_setjmp)
+	mflr	r0
+	PPC_STL	r0,0(r3)
+	PPC_STL	r1,SZL(r3)
+	PPC_STL	r2,2*SZL(r3)
+	mfcr	r0
+	PPC_STL	r0,3*SZL(r3)
+	PPC_STL	r13,4*SZL(r3)
+	PPC_STL	r14,5*SZL(r3)
+	PPC_STL	r15,6*SZL(r3)
+	PPC_STL	r16,7*SZL(r3)
+	PPC_STL	r17,8*SZL(r3)
+	PPC_STL	r18,9*SZL(r3)
+	PPC_STL	r19,10*SZL(r3)
+	PPC_STL	r20,11*SZL(r3)
+	PPC_STL	r21,12*SZL(r3)
+	PPC_STL	r22,13*SZL(r3)
+	PPC_STL	r23,14*SZL(r3)
+	PPC_STL	r24,15*SZL(r3)
+	PPC_STL	r25,16*SZL(r3)
+	PPC_STL	r26,17*SZL(r3)
+	PPC_STL	r27,18*SZL(r3)
+	PPC_STL	r28,19*SZL(r3)
+	PPC_STL	r29,20*SZL(r3)
+	PPC_STL	r30,21*SZL(r3)
+	PPC_STL	r31,22*SZL(r3)
+	li	r3,0
+	blr
+
+_GLOBAL(xmon_longjmp)
+	PPC_LCMPI r4,0
+	bne	1f
+	li	r4,1
+1:	PPC_LL	r13,4*SZL(r3)
+	PPC_LL	r14,5*SZL(r3)
+	PPC_LL	r15,6*SZL(r3)
+	PPC_LL	r16,7*SZL(r3)
+	PPC_LL	r17,8*SZL(r3)
+	PPC_LL	r18,9*SZL(r3)
+	PPC_LL	r19,10*SZL(r3)
+	PPC_LL	r20,11*SZL(r3)
+	PPC_LL	r21,12*SZL(r3)
+	PPC_LL	r22,13*SZL(r3)
+	PPC_LL	r23,14*SZL(r3)
+	PPC_LL	r24,15*SZL(r3)
+	PPC_LL	r25,16*SZL(r3)
+	PPC_LL	r26,17*SZL(r3)
+	PPC_LL	r27,18*SZL(r3)
+	PPC_LL	r28,19*SZL(r3)
+	PPC_LL	r29,20*SZL(r3)
+	PPC_LL	r30,21*SZL(r3)
+	PPC_LL	r31,22*SZL(r3)
+	PPC_LL	r0,3*SZL(r3)
+	mtcrf	0x38,r0
+	PPC_LL	r0,0(r3)
+	PPC_LL	r1,SZL(r3)
+	PPC_LL	r2,2*SZL(r3)
+	mtlr	r0
+	mr	r3,r4
+	blr
+
+/*
+ * Grab the register values as they are now.
+ * This won't do a particularily good job because we really
+ * want our caller's caller's registers, and our caller has
+ * already executed its prologue.
+ * ToDo: We could reach back into the caller's save area to do
+ * a better job of representing the caller's state (note that
+ * that will be different for 32-bit and 64-bit, because of the
+ * different ABIs, though).
+ */
+_GLOBAL(xmon_save_regs)
+	PPC_STL	r0,0*SZL(r3)
+	PPC_STL	r2,2*SZL(r3)
+	PPC_STL	r3,3*SZL(r3)
+	PPC_STL	r4,4*SZL(r3)
+	PPC_STL	r5,5*SZL(r3)
+	PPC_STL	r6,6*SZL(r3)
+	PPC_STL	r7,7*SZL(r3)
+	PPC_STL	r8,8*SZL(r3)
+	PPC_STL	r9,9*SZL(r3)
+	PPC_STL	r10,10*SZL(r3)
+	PPC_STL	r11,11*SZL(r3)
+	PPC_STL	r12,12*SZL(r3)
+	PPC_STL	r13,13*SZL(r3)
+	PPC_STL	r14,14*SZL(r3)
+	PPC_STL	r15,15*SZL(r3)
+	PPC_STL	r16,16*SZL(r3)
+	PPC_STL	r17,17*SZL(r3)
+	PPC_STL	r18,18*SZL(r3)
+	PPC_STL	r19,19*SZL(r3)
+	PPC_STL	r20,20*SZL(r3)
+	PPC_STL	r21,21*SZL(r3)
+	PPC_STL	r22,22*SZL(r3)
+	PPC_STL	r23,23*SZL(r3)
+	PPC_STL	r24,24*SZL(r3)
+	PPC_STL	r25,25*SZL(r3)
+	PPC_STL	r26,26*SZL(r3)
+	PPC_STL	r27,27*SZL(r3)
+	PPC_STL	r28,28*SZL(r3)
+	PPC_STL	r29,29*SZL(r3)
+	PPC_STL	r30,30*SZL(r3)
+	PPC_STL	r31,31*SZL(r3)
+	/* go up one stack frame for SP */
+	PPC_LL	r4,0(r1)
+	PPC_STL	r4,1*SZL(r3)
+	/* get caller's LR */
+	PPC_LL	r0,LRSAVE(r4)
+	PPC_STL	r0,_NIP-STACK_FRAME_OVERHEAD(r3)
+	PPC_STL	r0,_LINK-STACK_FRAME_OVERHEAD(r3)
+	mfmsr	r0
+	PPC_STL	r0,_MSR-STACK_FRAME_OVERHEAD(r3)
+	mfctr	r0
+	PPC_STL	r0,_CTR-STACK_FRAME_OVERHEAD(r3)
+	mfxer	r0
+	PPC_STL	r0,_XER-STACK_FRAME_OVERHEAD(r3)
+	mfcr	r0
+	PPC_STL	r0,_CCR-STACK_FRAME_OVERHEAD(r3)
+	li	r0,0
+	PPC_STL	r0,_TRAP-STACK_FRAME_OVERHEAD(r3)
+	blr
diff --git a/arch/powerpc/xmon/start_32.c b/arch/powerpc/xmon/start_32.c
new file mode 100644
index 000000000000..c2464df4217e
--- /dev/null
+++ b/arch/powerpc/xmon/start_32.c
@@ -0,0 +1,441 @@
+/*
+ * Copyright (C) 1996 Paul Mackerras.
+ */
+#include <linux/config.h>
+#include <linux/string.h>
+#include <asm/machdep.h>
+#include <asm/io.h>
+#include <asm/page.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+#include <linux/cuda.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/bitops.h>
+#include <asm/xmon.h>
+#include <asm/prom.h>
+#include <asm/bootx.h>
+#include <asm/machdep.h>
+#include <asm/errno.h>
+#include <asm/pmac_feature.h>
+#include <asm/processor.h>
+#include <asm/delay.h>
+#include <asm/btext.h>
+#include <asm/time.h>
+#include "nonstdio.h"
+
+static volatile unsigned char __iomem *sccc, *sccd;
+unsigned int TXRDY, RXRDY, DLAB;
+
+static int use_serial;
+static int use_screen;
+static int via_modem;
+static int xmon_use_sccb;
+static struct device_node *channel_node;
+
+void buf_access(void)
+{
+	if (DLAB)
+		sccd[3] &= ~DLAB;	/* reset DLAB */
+}
+
+extern int adb_init(void);
+
+#ifdef CONFIG_PPC_CHRP
+/*
+ * This looks in the "ranges" property for the primary PCI host bridge
+ * to find the physical address of the start of PCI/ISA I/O space.
+ * It is basically a cut-down version of pci_process_bridge_OF_ranges.
+ */
+static unsigned long chrp_find_phys_io_base(void)
+{
+	struct device_node *node;
+	unsigned int *ranges;
+	unsigned long base = CHRP_ISA_IO_BASE;
+	int rlen = 0;
+	int np;
+
+	node = find_devices("isa");
+	if (node != NULL) {
+		node = node->parent;
+		if (node == NULL || node->type == NULL
+		    || strcmp(node->type, "pci") != 0)
+			node = NULL;
+	}
+	if (node == NULL)
+		node = find_devices("pci");
+	if (node == NULL)
+		return base;
+
+	ranges = (unsigned int *) get_property(node, "ranges", &rlen);
+	np = prom_n_addr_cells(node) + 5;
+	while ((rlen -= np * sizeof(unsigned int)) >= 0) {
+		if ((ranges[0] >> 24) == 1 && ranges[2] == 0) {
+			/* I/O space starting at 0, grab the phys base */
+			base = ranges[np - 3];
+			break;
+		}
+		ranges += np;
+	}
+	return base;
+}
+#endif /* CONFIG_PPC_CHRP */
+
+void xmon_map_scc(void)
+{
+#ifdef CONFIG_PPC_MULTIPLATFORM
+	volatile unsigned char __iomem *base;
+
+	if (_machine == _MACH_Pmac) {
+		struct device_node *np;
+		unsigned long addr;
+#ifdef CONFIG_BOOTX_TEXT
+		if (!use_screen && !use_serial
+		    && !machine_is_compatible("iMac")) {
+			/* see if there is a keyboard in the device tree
+			   with a parent of type "adb" */
+			for (np = find_devices("keyboard"); np; np = np->next)
+				if (np->parent && np->parent->type
+				    && strcmp(np->parent->type, "adb") == 0)
+					break;
+
+			/* needs to be hacked if xmon_printk is to be used
+			   from within find_via_pmu() */
+#ifdef CONFIG_ADB_PMU
+			if (np != NULL && boot_text_mapped && find_via_pmu())
+				use_screen = 1;
+#endif
+#ifdef CONFIG_ADB_CUDA
+			if (np != NULL && boot_text_mapped && find_via_cuda())
+				use_screen = 1;
+#endif
+		}
+		if (!use_screen && (np = find_devices("escc")) != NULL) {
+			/*
+			 * look for the device node for the serial port
+			 * we're using and see if it says it has a modem
+			 */
+			char *name = xmon_use_sccb? "ch-b": "ch-a";
+			char *slots;
+			int l;
+
+			np = np->child;
+			while (np != NULL && strcmp(np->name, name) != 0)
+				np = np->sibling;
+			if (np != NULL) {
+				/* XXX should parse this properly */
+				channel_node = np;
+				slots = get_property(np, "slot-names", &l);
+				if (slots != NULL && l >= 10
+				    && strcmp(slots+4, "Modem") == 0)
+					via_modem = 1;
+			}
+		}
+		btext_drawstring("xmon uses ");
+		if (use_screen)
+			btext_drawstring("screen and keyboard\n");
+		else {
+			if (via_modem)
+				btext_drawstring("modem on ");
+			btext_drawstring(xmon_use_sccb? "printer": "modem");
+			btext_drawstring(" port\n");
+		}
+
+#endif /* CONFIG_BOOTX_TEXT */
+
+#ifdef CHRP_ESCC
+		addr = 0xc1013020;
+#else
+		addr = 0xf3013020;
+#endif
+		TXRDY = 4;
+		RXRDY = 1;
+	
+		np = find_devices("mac-io");
+		if (np && np->n_addrs)
+			addr = np->addrs[0].address + 0x13020;
+		base = (volatile unsigned char *) ioremap(addr & PAGE_MASK, PAGE_SIZE);
+		sccc = base + (addr & ~PAGE_MASK);
+		sccd = sccc + 0x10;
+
+	} else {
+		base = (volatile unsigned char *) isa_io_base;
+
+#ifdef CONFIG_PPC_CHRP
+		if (_machine == _MACH_chrp)
+			base = (volatile unsigned char __iomem *)
+				ioremap(chrp_find_phys_io_base(), 0x1000);
+#endif
+
+		sccc = base + 0x3fd;
+		sccd = base + 0x3f8;
+		if (xmon_use_sccb) {
+			sccc -= 0x100;
+			sccd -= 0x100;
+		}
+		TXRDY = 0x20;
+		RXRDY = 1;
+		DLAB = 0x80;
+	}
+#elif defined(CONFIG_GEMINI)
+	/* should already be mapped by the kernel boot */
+	sccc = (volatile unsigned char __iomem *) 0xffeffb0d;
+	sccd = (volatile unsigned char __iomem *) 0xffeffb08;
+	TXRDY = 0x20;
+	RXRDY = 1;
+	DLAB = 0x80;
+#elif defined(CONFIG_405GP)
+	sccc = (volatile unsigned char __iomem *)0xef600305;
+	sccd = (volatile unsigned char __iomem *)0xef600300;
+	TXRDY = 0x20;
+	RXRDY = 1;
+	DLAB = 0x80;
+#endif /* platform */
+}
+
+static int scc_initialized = 0;
+
+void xmon_init_scc(void);
+extern void cuda_poll(void);
+
+static inline void do_poll_adb(void)
+{
+#ifdef CONFIG_ADB_PMU
+	if (sys_ctrler == SYS_CTRLER_PMU)
+		pmu_poll_adb();
+#endif /* CONFIG_ADB_PMU */
+#ifdef CONFIG_ADB_CUDA
+	if (sys_ctrler == SYS_CTRLER_CUDA)
+		cuda_poll();
+#endif /* CONFIG_ADB_CUDA */
+}
+
+int xmon_write(void *ptr, int nb)
+{
+	char *p = ptr;
+	int i, c, ct;
+
+#ifdef CONFIG_SMP
+	static unsigned long xmon_write_lock;
+	int lock_wait = 1000000;
+	int locked;
+
+	while ((locked = test_and_set_bit(0, &xmon_write_lock)) != 0)
+		if (--lock_wait == 0)
+			break;
+#endif
+
+#ifdef CONFIG_BOOTX_TEXT
+	if (use_screen) {
+		/* write it on the screen */
+		for (i = 0; i < nb; ++i)
+			btext_drawchar(*p++);
+		goto out;
+	}
+#endif
+	if (!scc_initialized)
+		xmon_init_scc();
+	ct = 0;
+	for (i = 0; i < nb; ++i) {
+		while ((*sccc & TXRDY) == 0)
+			do_poll_adb();
+		c = p[i];
+		if (c == '\n' && !ct) {
+			c = '\r';
+			ct = 1;
+			--i;
+		} else {
+			ct = 0;
+		}
+		buf_access();
+		*sccd = c;
+		eieio();
+	}
+
+ out:
+#ifdef CONFIG_SMP
+	if (!locked)
+		clear_bit(0, &xmon_write_lock);
+#endif
+	return nb;
+}
+
+int xmon_wants_key;
+int xmon_adb_keycode;
+
+#ifdef CONFIG_BOOTX_TEXT
+static int xmon_adb_shiftstate;
+
+static unsigned char xmon_keytab[128] =
+	"asdfhgzxcv\000bqwer"				/* 0x00 - 0x0f */
+	"yt123465=97-80]o"				/* 0x10 - 0x1f */
+	"u[ip\rlj'k;\\,/nm."				/* 0x20 - 0x2f */
+	"\t `\177\0\033\0\0\0\0\0\0\0\0\0\0"		/* 0x30 - 0x3f */
+	"\0.\0*\0+\0\0\0\0\0/\r\0-\0"			/* 0x40 - 0x4f */
+	"\0\0000123456789\0\0\0";			/* 0x50 - 0x5f */
+
+static unsigned char xmon_shift_keytab[128] =
+	"ASDFHGZXCV\000BQWER"				/* 0x00 - 0x0f */
+	"YT!@#$^%+(&_*)}O"				/* 0x10 - 0x1f */
+	"U{IP\rLJ\"K:|<?NM>"				/* 0x20 - 0x2f */
+	"\t ~\177\0\033\0\0\0\0\0\0\0\0\0\0"		/* 0x30 - 0x3f */
+	"\0.\0*\0+\0\0\0\0\0/\r\0-\0"			/* 0x40 - 0x4f */
+	"\0\0000123456789\0\0\0";			/* 0x50 - 0x5f */
+
+static int xmon_get_adb_key(void)
+{
+	int k, t, on;
+
+	xmon_wants_key = 1;
+	for (;;) {
+		xmon_adb_keycode = -1;
+		t = 0;
+		on = 0;
+		do {
+			if (--t < 0) {
+				on = 1 - on;
+				btext_drawchar(on? 0xdb: 0x20);
+				btext_drawchar('\b');
+				t = 200000;
+			}
+			do_poll_adb();
+		} while (xmon_adb_keycode == -1);
+		k = xmon_adb_keycode;
+		if (on)
+			btext_drawstring(" \b");
+
+		/* test for shift keys */
+		if ((k & 0x7f) == 0x38 || (k & 0x7f) == 0x7b) {
+			xmon_adb_shiftstate = (k & 0x80) == 0;
+			continue;
+		}
+		if (k >= 0x80)
+			continue;	/* ignore up transitions */
+		k = (xmon_adb_shiftstate? xmon_shift_keytab: xmon_keytab)[k];
+		if (k != 0)
+			break;
+	}
+	xmon_wants_key = 0;
+	return k;
+}
+#endif /* CONFIG_BOOTX_TEXT */
+
+int xmon_readchar(void)
+{
+#ifdef CONFIG_BOOTX_TEXT
+	if (use_screen)
+		return xmon_get_adb_key();
+#endif
+	if (!scc_initialized)
+		xmon_init_scc();
+	while ((*sccc & RXRDY) == 0)
+		do_poll_adb();
+	buf_access();
+	return *sccd;
+}
+
+int xmon_read_poll(void)
+{
+	if ((*sccc & RXRDY) == 0) {
+		do_poll_adb();
+		return -1;
+	}
+	buf_access();
+	return *sccd;
+}
+
+static unsigned char scc_inittab[] = {
+    13, 0,		/* set baud rate divisor */
+    12, 1,
+    14, 1,		/* baud rate gen enable, src=rtxc */
+    11, 0x50,		/* clocks = br gen */
+    5,  0xea,		/* tx 8 bits, assert DTR & RTS */
+    4,  0x46,		/* x16 clock, 1 stop */
+    3,  0xc1,		/* rx enable, 8 bits */
+};
+
+void xmon_init_scc(void)
+{
+	if ( _machine == _MACH_chrp )
+	{
+		sccd[3] = 0x83; eieio();	/* LCR = 8N1 + DLAB */
+		sccd[0] = 12; eieio();		/* DLL = 9600 baud */
+		sccd[1] = 0; eieio();
+		sccd[2] = 0; eieio();		/* FCR = 0 */
+		sccd[3] = 3; eieio();		/* LCR = 8N1 */
+		sccd[1] = 0; eieio();		/* IER = 0 */
+	}
+	else if ( _machine == _MACH_Pmac )
+	{
+		int i, x;
+		unsigned long timeout;
+
+		if (channel_node != 0)
+			pmac_call_feature(
+				PMAC_FTR_SCC_ENABLE,
+				channel_node,
+				PMAC_SCC_ASYNC | PMAC_SCC_FLAG_XMON, 1);
+			printk(KERN_INFO "Serial port locked ON by debugger !\n");
+		if (via_modem && channel_node != 0) {
+			unsigned int t0;
+
+			pmac_call_feature(
+				PMAC_FTR_MODEM_ENABLE,
+				channel_node, 0, 1);
+			printk(KERN_INFO "Modem powered up by debugger !\n");
+			t0 = get_tbl();
+			timeout = 3 * tb_ticks_per_sec;
+			if (timeout == 0)
+				/* assume 25MHz if tb_ticks_per_sec not set */
+				timeout = 75000000;
+			while (get_tbl() - t0 < timeout)
+				eieio();
+		}
+		/* use the B channel if requested */
+		if (xmon_use_sccb) {
+			sccc = (volatile unsigned char *)
+				((unsigned long)sccc & ~0x20);
+			sccd = sccc + 0x10;
+		}
+		for (i = 20000; i != 0; --i) {
+			x = *sccc; eieio();
+		}
+		*sccc = 9; eieio();		/* reset A or B side */
+		*sccc = ((unsigned long)sccc & 0x20)? 0x80: 0x40; eieio();
+		for (i = 0; i < sizeof(scc_inittab); ++i) {
+			*sccc = scc_inittab[i];
+			eieio();
+		}
+	}
+	scc_initialized = 1;
+	if (via_modem) {
+		for (;;) {
+			xmon_write("ATE1V1\r", 7);
+			if (xmon_expect("OK", 5)) {
+				xmon_write("ATA\r", 4);
+				if (xmon_expect("CONNECT", 40))
+					break;
+			}
+			xmon_write("+++", 3);
+			xmon_expect("OK", 3);
+		}
+	}
+}
+
+void xmon_enter(void)
+{
+#ifdef CONFIG_ADB_PMU
+	if (_machine == _MACH_Pmac) {
+		pmu_suspend();
+	}
+#endif
+}
+
+void xmon_leave(void)
+{
+#ifdef CONFIG_ADB_PMU
+	if (_machine == _MACH_Pmac) {
+		pmu_resume();
+	}
+#endif
+}
diff --git a/arch/powerpc/xmon/start_64.c b/arch/powerpc/xmon/start_64.c
new file mode 100644
index 000000000000..712552c4f242
--- /dev/null
+++ b/arch/powerpc/xmon/start_64.c
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 1996 Paul Mackerras.
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+#include <asm/machdep.h>
+#include <asm/udbg.h>
+#include "nonstdio.h"
+
+void xmon_map_scc(void)
+{
+}
+
+int xmon_write(void *ptr, int nb)
+{
+	return udbg_write(ptr, nb);
+}
+
+int xmon_readchar(void)
+{
+	if (udbg_getc)
+		return udbg_getc();
+	return -1;
+}
+
+int xmon_read_poll(void)
+{
+	if (udbg_getc_poll)
+		return udbg_getc_poll();
+	return -1;
+}
diff --git a/arch/powerpc/xmon/start_8xx.c b/arch/powerpc/xmon/start_8xx.c
new file mode 100644
index 000000000000..4c17b0486ad5
--- /dev/null
+++ b/arch/powerpc/xmon/start_8xx.c
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 1996 Paul Mackerras.
+ * Copyright (C) 2000 Dan Malek.
+ * Quick hack of Paul's code to make XMON work on 8xx processors.  Lots
+ * of assumptions, like the SMC1 is used, it has been initialized by the
+ * loader at some point, and we can just stuff and suck bytes.
+ * We rely upon the 8xx uart driver to support us, as the interface
+ * changes between boot up and operational phases of the kernel.
+ */
+#include <linux/string.h>
+#include <asm/machdep.h>
+#include <asm/io.h>
+#include <asm/page.h>
+#include <linux/kernel.h>
+#include <asm/8xx_immap.h>
+#include <asm/mpc8xx.h>
+#include <asm/commproc.h>
+#include "nonstdio.h"
+
+extern int xmon_8xx_write(char *str, int nb);
+extern int xmon_8xx_read_poll(void);
+extern int xmon_8xx_read_char(void);
+
+void xmon_map_scc(void)
+{
+	cpmp = (cpm8xx_t *)&(((immap_t *)IMAP_ADDR)->im_cpm);
+}
+
+void xmon_init_scc(void);
+
+int xmon_write(void *ptr, int nb)
+{
+	return(xmon_8xx_write(ptr, nb));
+}
+
+int xmon_readchar(void)
+{
+	return xmon_8xx_read_char();
+}
+
+int xmon_read_poll(void)
+{
+	return(xmon_8xx_read_poll());
+}
diff --git a/arch/ppc64/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 74e63a886a69..c45a6ad5f3b7 100644
--- a/arch/ppc64/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -1,7 +1,7 @@
 /*
  * Routines providing a simple monitor for use on the PowerMac.
  *
- * Copyright (C) 1996 Paul Mackerras.
+ * Copyright (C) 1996-2005 Paul Mackerras.
  *
  *      This program is free software; you can redistribute it and/or
  *      modify it under the terms of the GNU General Public License
@@ -17,25 +17,33 @@
 #include <linux/delay.h>
 #include <linux/kallsyms.h>
 #include <linux/cpumask.h>
+#include <linux/module.h>
+#include <linux/sysrq.h>
+#include <linux/interrupt.h>
 
 #include <asm/ptrace.h>
 #include <asm/string.h>
 #include <asm/prom.h>
 #include <asm/machdep.h>
+#include <asm/xmon.h>
+#ifdef CONFIG_PMAC_BACKLIGHT
+#include <asm/backlight.h>
+#endif
 #include <asm/processor.h>
 #include <asm/pgtable.h>
 #include <asm/mmu.h>
 #include <asm/mmu_context.h>
-#include <asm/paca.h>
-#include <asm/ppcdebug.h>
 #include <asm/cputable.h>
 #include <asm/rtas.h>
 #include <asm/sstep.h>
 #include <asm/bug.h>
+
+#ifdef CONFIG_PPC64
 #include <asm/hvcall.h>
+#include <asm/paca.h>
+#endif
 
 #include "nonstdio.h"
-#include "privinst.h"
 
 #define scanhex	xmon_scanhex
 #define skipbl	xmon_skipbl
@@ -58,7 +66,7 @@ static unsigned long ncsum = 4096;
 static int termch;
 static char tmpstr[128];
 
-#define JMP_BUF_LEN	(184/sizeof(long))
+#define JMP_BUF_LEN	23
 static long bus_error_jmp[JMP_BUF_LEN];
 static int catch_memory_errors;
 static long *xmon_fault_jmp[NR_CPUS];
@@ -130,23 +138,31 @@ static void cacheflush(void);
 static int  cpu_cmd(void);
 static void csum(void);
 static void bootcmds(void);
+static void proccall(void);
 void dump_segments(void);
 static void symbol_lookup(void);
 static void xmon_print_symbol(unsigned long address, const char *mid,
 			      const char *after);
 static const char *getvecname(unsigned long vec);
 
-static void debug_trace(void);
-
 extern int print_insn_powerpc(unsigned long, unsigned long, int);
-extern void printf(const char *fmt, ...);
-extern void xmon_vfprintf(void *f, const char *fmt, va_list ap);
-extern int xmon_putc(int c, void *f);
-extern int putchar(int ch);
-extern int xmon_read_poll(void);
-extern int setjmp(long *);
-extern void longjmp(long *, int);
-extern unsigned long _ASR;
+
+extern void xmon_enter(void);
+extern void xmon_leave(void);
+
+extern long setjmp(long *);
+extern void longjmp(long *, long);
+extern void xmon_save_regs(struct pt_regs *);
+
+#ifdef CONFIG_PPC64
+#define REG		"%.16lx"
+#define REGS_PER_LINE	4
+#define LAST_VOLATILE	13
+#else
+#define REG		"%.8lx"
+#define REGS_PER_LINE	8
+#define LAST_VOLATILE	12
+#endif
 
 #define GETWORD(v)	(((v)[0] << 24) + ((v)[1] << 16) + ((v)[2] << 8) + (v)[3])
 
@@ -186,47 +202,45 @@ Commands:\n\
   ml	locate a block of memory\n\
   mz	zero a block of memory\n\
   mi	show information about memory allocation\n\
-  p 	show the task list\n\
+  p 	call a procedure\n\
   r	print registers\n\
   s	single step\n\
   S	print special registers\n\
   t	print backtrace\n\
-  T	Enable/Disable PPCDBG flags\n\
   x	exit monitor and recover\n\
-  X	exit monitor and dont recover\n\
-  u	dump segment table or SLB\n\
-  ?	help\n"
-  "\
-  zr	reboot\n\
+  X	exit monitor and dont recover\n"
+#ifdef CONFIG_PPC64
+"  u	dump segment table or SLB\n"
+#endif
+#ifdef CONFIG_PPC_STD_MMU_32
+"  u	dump segment registers\n"
+#endif
+"  ?	help\n"
+"  zr	reboot\n\
   zh	halt\n"
 ;
 
 static struct pt_regs *xmon_regs;
 
-extern inline void sync(void)
+static inline void sync(void)
 {
 	asm volatile("sync; isync");
 }
 
-/* (Ref: 64-bit PowerPC ELF ABI Spplement; Ian Lance Taylor, Zembu Labs).
- A PPC stack frame looks like this:
-
- High Address
-    Back Chain
-    FP reg save area
-    GP reg save area
-    Local var space
-    Parameter save area		(SP+48)
-    TOC save area		(SP+40)
-    link editor doubleword	(SP+32)
-    compiler doubleword		(SP+24)
-    LR save			(SP+16)
-    CR save			(SP+8)
-    Back Chain			(SP+0)
-
- Note that the LR (ret addr) may not be saved in the current frame if
- no functions have been called from the current function.
- */
+static inline void store_inst(void *p)
+{
+	asm volatile ("dcbst 0,%0; sync; icbi 0,%0; isync" : : "r" (p));
+}
+
+static inline void cflush(void *p)
+{
+	asm volatile ("dcbf 0,%0; icbi 0,%0" : : "r" (p));
+}
+
+static inline void cinval(void *p)
+{
+	asm volatile ("dcbi 0,%0; icbi 0,%0" : : "r" (p));
+}
 
 /*
  * Disable surveillance (the service processor watchdog function)
@@ -310,8 +324,8 @@ int xmon_core(struct pt_regs *regs, int fromipi)
 	unsigned long timeout;
 #endif
 
-	msr = get_msr();
-	set_msrd(msr & ~MSR_EE);	/* disable interrupts */
+	msr = mfmsr();
+	mtmsr(msr & ~MSR_EE);	/* disable interrupts */
 
 	bp = in_breakpoint_table(regs->nip, &offset);
 	if (bp != NULL) {
@@ -487,7 +501,7 @@ int xmon_core(struct pt_regs *regs, int fromipi)
 
 	insert_cpu_bpts();
 
-	set_msrd(msr);		/* restore interrupt enable */
+	mtmsr(msr);		/* restore interrupt enable */
 
 	return cmd != 'X';
 }
@@ -497,56 +511,23 @@ int xmon(struct pt_regs *excp)
 	struct pt_regs regs;
 
 	if (excp == NULL) {
-		/* Ok, grab regs as they are now.
-		 This won't do a particularily good job because the
-		 prologue has already been executed.
-		 ToDo: We could reach back into the callers save
-		 area to do a better job of representing the
-		 caller's state.
-		 */
-		asm volatile ("std	0,0(%0)\n\
-			std	1,8(%0)\n\
-			std	2,16(%0)\n\
-			std	3,24(%0)\n\
-			std	4,32(%0)\n\
-			std	5,40(%0)\n\
-			std	6,48(%0)\n\
-			std	7,56(%0)\n\
-			std	8,64(%0)\n\
-			std	9,72(%0)\n\
-			std	10,80(%0)\n\
-			std	11,88(%0)\n\
-			std	12,96(%0)\n\
-			std	13,104(%0)\n\
-			std	14,112(%0)\n\
-			std	15,120(%0)\n\
-			std	16,128(%0)\n\
-			std	17,136(%0)\n\
-			std	18,144(%0)\n\
-			std	19,152(%0)\n\
-			std	20,160(%0)\n\
-			std	21,168(%0)\n\
-			std	22,176(%0)\n\
-			std	23,184(%0)\n\
-			std	24,192(%0)\n\
-			std	25,200(%0)\n\
-			std	26,208(%0)\n\
-			std	27,216(%0)\n\
-			std	28,224(%0)\n\
-			std	29,232(%0)\n\
-			std	30,240(%0)\n\
-			std	31,248(%0)" : : "b" (&regs));
-
-		regs.nip = regs.link = ((unsigned long *)(regs.gpr[1]))[2];
-		regs.msr = get_msr();
-		regs.ctr = get_ctr();
-		regs.xer = get_xer();
-		regs.ccr = get_cr();
-		regs.trap = 0;
+		xmon_save_regs(&regs);
 		excp = &regs;
 	}
 	return xmon_core(excp, 0);
 }
+EXPORT_SYMBOL(xmon);
+
+irqreturn_t
+xmon_irq(int irq, void *d, struct pt_regs *regs)
+{
+	unsigned long flags;
+	local_irq_save(flags);
+	printf("Keyboard interrupt\n");
+	xmon(regs);
+	local_irq_restore(flags);
+	return IRQ_HANDLED;
+}
 
 int xmon_bpt(struct pt_regs *regs)
 {
@@ -718,7 +699,7 @@ static void insert_cpu_bpts(void)
 	if (dabr.enabled)
 		set_dabr(dabr.address | (dabr.enabled & 7));
 	if (iabr && cpu_has_feature(CPU_FTR_IABR))
-		set_iabr(iabr->address
+		mtspr(SPRN_IABR, iabr->address
 			 | (iabr->enabled & (BP_IABR|BP_IABR_TE)));
 }
 
@@ -746,7 +727,7 @@ static void remove_cpu_bpts(void)
 {
 	set_dabr(0);
 	if (cpu_has_feature(CPU_FTR_IABR))
-		set_iabr(0);
+		mtspr(SPRN_IABR, 0);
 }
 
 /* Command interpreting routine */
@@ -764,7 +745,6 @@ cmds(struct pt_regs *excp)
 		printf("%x:", smp_processor_id());
 #endif /* CONFIG_SMP */
 		printf("mon> ");
-		fflush(stdout);
 		flush_input();
 		termch = 0;
 		cmd = skipbl();
@@ -830,9 +810,6 @@ cmds(struct pt_regs *excp)
 		case '?':
 			printf(help_string);
 			break;
-		case 'p':
-			show_state();
-			break;
 		case 'b':
 			bpt_cmds();
 			break;
@@ -846,12 +823,14 @@ cmds(struct pt_regs *excp)
 		case 'z':
 			bootcmds();
 			break;
-		case 'T':
-			debug_trace();
+		case 'p':
+			proccall();
 			break;
+#ifdef CONFIG_PPC_STD_MMU
 		case 'u':
 			dump_segments();
 			break;
+#endif
 		default:
 			printf("Unrecognized command: ");
 		        do {
@@ -1070,6 +1049,7 @@ bpt_cmds(void)
 
 	cmd = inchar();
 	switch (cmd) {
+#ifndef CONFIG_8xx
 	case 'd':	/* bd - hardware data breakpoint */
 		mode = 7;
 		cmd = inchar();
@@ -1111,6 +1091,7 @@ bpt_cmds(void)
 			iabr = bp;
 		}
 		break;
+#endif
 
 	case 'c':
 		if (!scanhex(&a)) {
@@ -1152,7 +1133,7 @@ bpt_cmds(void)
 			/* print all breakpoints */
 			printf("   type            address\n");
 			if (dabr.enabled) {
-				printf("   data   %.16lx  [", dabr.address);
+				printf("   data   "REG"  [", dabr.address);
 				if (dabr.enabled & 1)
 					printf("r");
 				if (dabr.enabled & 2)
@@ -1231,6 +1212,18 @@ static void get_function_bounds(unsigned long pc, unsigned long *startp,
 
 static int xmon_depth_to_print = 64;
 
+#ifdef CONFIG_PPC64
+#define LRSAVE_OFFSET		0x10
+#define REG_FRAME_MARKER	0x7265677368657265ul	/* "regshere" */
+#define MARKER_OFFSET		0x60
+#define REGS_OFFSET		0x70
+#else
+#define LRSAVE_OFFSET		4
+#define REG_FRAME_MARKER	0x72656773
+#define MARKER_OFFSET		8
+#define REGS_OFFSET		16
+#endif
+
 static void xmon_show_stack(unsigned long sp, unsigned long lr,
 			    unsigned long pc)
 {
@@ -1247,7 +1240,7 @@ static void xmon_show_stack(unsigned long sp, unsigned long lr,
 			break;
 		}
 
-		if (!mread(sp + 16, &ip, sizeof(unsigned long))
+		if (!mread(sp + LRSAVE_OFFSET, &ip, sizeof(unsigned long))
 		    || !mread(sp, &newsp, sizeof(unsigned long))) {
 			printf("Couldn't read stack frame at %lx\n", sp);
 			break;
@@ -1266,7 +1259,7 @@ static void xmon_show_stack(unsigned long sp, unsigned long lr,
 			get_function_bounds(pc, &fnstart, &fnend);
 			nextip = 0;
 			if (newsp > sp)
-				mread(newsp + 16, &nextip,
+				mread(newsp + LRSAVE_OFFSET, &nextip,
 				      sizeof(unsigned long));
 			if (lr == ip) {
 				if (lr < PAGE_OFFSET
@@ -1280,24 +1273,24 @@ static void xmon_show_stack(unsigned long sp, unsigned long lr,
 				xmon_print_symbol(lr, " ", "\n");
 			}
 			if (printip) {
-				printf("[%.16lx] ", sp);
+				printf("["REG"] ", sp);
 				xmon_print_symbol(ip, " ", " (unreliable)\n");
 			}
 			pc = lr = 0;
 
 		} else {
-			printf("[%.16lx] ", sp);
+			printf("["REG"] ", sp);
 			xmon_print_symbol(ip, " ", "\n");
 		}
 
 		/* Look for "regshere" marker to see if this is
 		   an exception frame. */
-		if (mread(sp + 0x60, &marker, sizeof(unsigned long))
-		    && marker == 0x7265677368657265ul) {
-			if (mread(sp + 0x70, &regs, sizeof(regs))
+		if (mread(sp + MARKER_OFFSET, &marker, sizeof(unsigned long))
+		    && marker == REG_FRAME_MARKER) {
+			if (mread(sp + REGS_OFFSET, &regs, sizeof(regs))
 			    != sizeof(regs)) {
 				printf("Couldn't read registers at %lx\n",
-				       sp + 0x70);
+				       sp + REGS_OFFSET);
 				break;
 			}
                         printf("--- Exception: %lx %s at ", regs.trap,
@@ -1371,7 +1364,9 @@ void excprint(struct pt_regs *fp)
 	}
 
 	printf("  current = 0x%lx\n", current);
+#ifdef CONFIG_PPC64
 	printf("  paca    = 0x%lx\n", get_paca());
+#endif
 	if (current) {
 		printf("    pid   = %ld, comm = %s\n",
 		       current->pid, current->comm);
@@ -1383,7 +1378,7 @@ void excprint(struct pt_regs *fp)
 
 void prregs(struct pt_regs *fp)
 {
-	int n;
+	int n, trap;
 	unsigned long base;
 	struct pt_regs regs;
 
@@ -1396,7 +1391,7 @@ void prregs(struct pt_regs *fp)
 			__delay(200);
 		} else {
 			catch_memory_errors = 0;
-			printf("*** Error reading registers from %.16lx\n",
+			printf("*** Error reading registers from "REG"\n",
 			       base);
 			return;
 		}
@@ -1404,22 +1399,36 @@ void prregs(struct pt_regs *fp)
 		fp = &regs;
 	}
 
+#ifdef CONFIG_PPC64
 	if (FULL_REGS(fp)) {
 		for (n = 0; n < 16; ++n)
-			printf("R%.2ld = %.16lx   R%.2ld = %.16lx\n",
+			printf("R%.2ld = "REG"   R%.2ld = "REG"\n",
 			       n, fp->gpr[n], n+16, fp->gpr[n+16]);
 	} else {
 		for (n = 0; n < 7; ++n)
-			printf("R%.2ld = %.16lx   R%.2ld = %.16lx\n",
+			printf("R%.2ld = "REG"   R%.2ld = "REG"\n",
 			       n, fp->gpr[n], n+7, fp->gpr[n+7]);
 	}
+#else
+	for (n = 0; n < 32; ++n) {
+		printf("R%.2d = %.8x%s", n, fp->gpr[n],
+		       (n & 3) == 3? "\n": "   ");
+		if (n == 12 && !FULL_REGS(fp)) {
+			printf("\n");
+			break;
+		}
+	}
+#endif
 	printf("pc  = ");
 	xmon_print_symbol(fp->nip, " ", "\n");
 	printf("lr  = ");
 	xmon_print_symbol(fp->link, " ", "\n");
-	printf("msr = %.16lx   cr  = %.8lx\n", fp->msr, fp->ccr);
-	printf("ctr = %.16lx   xer = %.16lx   trap = %8lx\n",
+	printf("msr = "REG"   cr  = %.8lx\n", fp->msr, fp->ccr);
+	printf("ctr = "REG"   xer = "REG"   trap = %4lx\n",
 	       fp->ctr, fp->xer, fp->trap);
+	trap = TRAP(fp);
+	if (trap == 0x300 || trap == 0x380 || trap == 0x600)
+		printf("dar = "REG"   dsisr = %.8lx\n", fp->dar, fp->dsisr);
 }
 
 void cacheflush(void)
@@ -1459,17 +1468,23 @@ read_spr(int n)
 {
 	unsigned int instrs[2];
 	unsigned long (*code)(void);
-	unsigned long opd[3];
 	unsigned long ret = -1UL;
+#ifdef CONFIG_PPC64
+	unsigned long opd[3];
 
-	instrs[0] = 0x7c6002a6 + ((n & 0x1F) << 16) + ((n & 0x3e0) << 6);
-	instrs[1] = 0x4e800020;
 	opd[0] = (unsigned long)instrs;
 	opd[1] = 0;
 	opd[2] = 0;
+	code = (unsigned long (*)(void)) opd;
+#else
+	code = (unsigned long (*)(void)) instrs;
+#endif
+
+	/* mfspr r3,n; blr */
+	instrs[0] = 0x7c6002a6 + ((n & 0x1F) << 16) + ((n & 0x3e0) << 6);
+	instrs[1] = 0x4e800020;
 	store_inst(instrs);
 	store_inst(instrs+1);
-	code = (unsigned long (*)(void)) opd;
 
 	if (setjmp(bus_error_jmp) == 0) {
 		catch_memory_errors = 1;
@@ -1491,16 +1506,21 @@ write_spr(int n, unsigned long val)
 {
 	unsigned int instrs[2];
 	unsigned long (*code)(unsigned long);
+#ifdef CONFIG_PPC64
 	unsigned long opd[3];
 
-	instrs[0] = 0x7c6003a6 + ((n & 0x1F) << 16) + ((n & 0x3e0) << 6);
-	instrs[1] = 0x4e800020;
 	opd[0] = (unsigned long)instrs;
 	opd[1] = 0;
 	opd[2] = 0;
+	code = (unsigned long (*)(unsigned long)) opd;
+#else
+	code = (unsigned long (*)(unsigned long)) instrs;
+#endif
+
+	instrs[0] = 0x7c6003a6 + ((n & 0x1F) << 16) + ((n & 0x3e0) << 6);
+	instrs[1] = 0x4e800020;
 	store_inst(instrs);
 	store_inst(instrs+1);
-	code = (unsigned long (*)(unsigned long)) opd;
 
 	if (setjmp(bus_error_jmp) == 0) {
 		catch_memory_errors = 1;
@@ -1519,8 +1539,7 @@ static unsigned long regno;
 extern char exc_prolog;
 extern char dec_exc;
 
-void
-super_regs(void)
+void super_regs(void)
 {
 	int cmd;
 	unsigned long val;
@@ -1536,12 +1555,14 @@ super_regs(void)
 		asm("mr %0,1" : "=r" (sp) :);
 		asm("mr %0,2" : "=r" (toc) :);
 
-		printf("msr  = %.16lx  sprg0= %.16lx\n", get_msr(), get_sprg0());
-		printf("pvr  = %.16lx  sprg1= %.16lx\n", get_pvr(), get_sprg1()); 
-		printf("dec  = %.16lx  sprg2= %.16lx\n", get_dec(), get_sprg2());
-		printf("sp   = %.16lx  sprg3= %.16lx\n", sp, get_sprg3());
-		printf("toc  = %.16lx  dar  = %.16lx\n", toc, get_dar());
-		printf("srr0 = %.16lx  srr1 = %.16lx\n", get_srr0(), get_srr1());
+		printf("msr  = "REG"  sprg0= "REG"\n",
+		       mfmsr(), mfspr(SPRN_SPRG0));
+		printf("pvr  = "REG"  sprg1= "REG"\n",
+		       mfspr(SPRN_PVR), mfspr(SPRN_SPRG1)); 
+		printf("dec  = "REG"  sprg2= "REG"\n",
+		       mfspr(SPRN_DEC), mfspr(SPRN_SPRG2));
+		printf("sp   = "REG"  sprg3= "REG"\n", sp, mfspr(SPRN_SPRG3));
+		printf("toc  = "REG"  dar  = "REG"\n", toc, mfspr(SPRN_DAR));
 #ifdef CONFIG_PPC_ISERIES
 		// Dump out relevant Paca data areas.
 		printf("Paca: \n");
@@ -1578,11 +1599,6 @@ super_regs(void)
 	case 'r':
 		printf("spr %lx = %lx\n", regno, read_spr(regno));
 		break;
-	case 'm':
-		val = get_msr();
-		scanhex(&val);
-		set_msrd(val);
-		break;
 	}
 	scannl();
 }
@@ -1604,13 +1620,13 @@ mread(unsigned long adrs, void *buf, int size)
 		q = (char *)buf;
 		switch (size) {
 		case 2:
-			*(short *)q = *(short *)p;
+			*(u16 *)q = *(u16 *)p;
 			break;
 		case 4:
-			*(int *)q = *(int *)p;
+			*(u32 *)q = *(u32 *)p;
 			break;
 		case 8:
-			*(long *)q = *(long *)p;
+			*(u64 *)q = *(u64 *)p;
 			break;
 		default:
 			for( ; n < size; ++n) {
@@ -1641,13 +1657,13 @@ mwrite(unsigned long adrs, void *buf, int size)
 		q = (char *) buf;
 		switch (size) {
 		case 2:
-			*(short *)p = *(short *)q;
+			*(u16 *)p = *(u16 *)q;
 			break;
 		case 4:
-			*(int *)p = *(int *)q;
+			*(u32 *)p = *(u32 *)q;
 			break;
 		case 8:
-			*(long *)p = *(long *)q;
+			*(u64 *)p = *(u64 *)q;
 			break;
 		default:
 			for ( ; n < size; ++n) {
@@ -1667,11 +1683,12 @@ mwrite(unsigned long adrs, void *buf, int size)
 }
 
 static int fault_type;
+static int fault_except;
 static char *fault_chars[] = { "--", "**", "##" };
 
-static int
-handle_fault(struct pt_regs *regs)
+static int handle_fault(struct pt_regs *regs)
 {
+	fault_except = TRAP(regs);
 	switch (TRAP(regs)) {
 	case 0x200:
 		fault_type = 0;
@@ -1787,7 +1804,7 @@ memex(void)
 	for(;;){
 		if (!mnoread)
 			n = mread(adrs, val, size);
-		printf("%.16x%c", adrs, brev? 'r': ' ');
+		printf(REG"%c", adrs, brev? 'r': ' ');
 		if (!mnoread) {
 			if (brev)
 				byterev(val, size);
@@ -1960,23 +1977,24 @@ prdump(unsigned long adrs, long ndump)
 	unsigned char temp[16];
 
 	for (n = ndump; n > 0;) {
-		printf("%.16lx", adrs);
+		printf(REG, adrs);
 		putchar(' ');
 		r = n < 16? n: 16;
 		nr = mread(adrs, temp, r);
 		adrs += nr;
 		for (m = 0; m < r; ++m) {
-		        if ((m & 7) == 0 && m > 0)
-			    putchar(' ');
+		        if ((m & (sizeof(long) - 1)) == 0 && m > 0)
+				putchar(' ');
 			if (m < nr)
 				printf("%.2x", temp[m]);
 			else
 				printf("%s", fault_chars[fault_type]);
 		}
-		if (m <= 8)
-			printf(" ");
-		for (; m < 16; ++m)
+		for (; m < 16; ++m) {
+		        if ((m & (sizeof(long) - 1)) == 0)
+				putchar(' ');
 			printf("  ");
+		}
 		printf("  |");
 		for (m = 0; m < r; ++m) {
 			if (m < nr) {
@@ -2008,7 +2026,7 @@ ppc_inst_dump(unsigned long adr, long count, int praddr)
 		if (nr == 0) {
 			if (praddr) {
 				const char *x = fault_chars[fault_type];
-				printf("%.16lx  %s%s%s%s\n", adr, x, x, x, x);
+				printf(REG"  %s%s%s%s\n", adr, x, x, x, x);
 			}
 			break;
 		}
@@ -2023,7 +2041,7 @@ ppc_inst_dump(unsigned long adr, long count, int praddr)
 		dotted = 0;
 		last_inst = inst;
 		if (praddr)
-			printf("%.16lx  %.8x", adr, inst);
+			printf(REG"  %.8x", adr, inst);
 		printf("\t");
 		print_insn_powerpc(inst, adr, 0);	/* always returns 4 */
 		printf("\n");
@@ -2141,7 +2159,6 @@ memzcan(void)
 		ok = mread(a, &v, 1);
 		if (ok && !ook) {
 			printf("%.8x .. ", a);
-			fflush(stdout);
 		} else if (!ok && ook)
 			printf("%.8x\n", a - mskip);
 		ook = ok;
@@ -2152,6 +2169,42 @@ memzcan(void)
 		printf("%.8x\n", a - mskip);
 }
 
+void proccall(void)
+{
+	unsigned long args[8];
+	unsigned long ret;
+	int i;
+	typedef unsigned long (*callfunc_t)(unsigned long, unsigned long,
+			unsigned long, unsigned long, unsigned long,
+			unsigned long, unsigned long, unsigned long);
+	callfunc_t func;
+
+	if (!scanhex(&adrs))
+		return;
+	if (termch != '\n')
+		termch = 0;
+	for (i = 0; i < 8; ++i)
+		args[i] = 0;
+	for (i = 0; i < 8; ++i) {
+		if (!scanhex(&args[i]) || termch == '\n')
+			break;
+		termch = 0;
+	}
+	func = (callfunc_t) adrs;
+	ret = 0;
+	if (setjmp(bus_error_jmp) == 0) {
+		catch_memory_errors = 1;
+		sync();
+		ret = func(args[0], args[1], args[2], args[3],
+			   args[4], args[5], args[6], args[7]);
+		sync();
+		printf("return value is %x\n", ret);
+	} else {
+		printf("*** %x exception occurred\n", fault_except);
+	}
+	catch_memory_errors = 0;
+}
+
 /* Input scanning routines */
 int
 skipbl(void)
@@ -2174,7 +2227,12 @@ static char *regnames[N_PTREGS] = {
 	"r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
 	"r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
 	"r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",
-	"pc", "msr", "or3", "ctr", "lr", "xer", "ccr", "softe",
+	"pc", "msr", "or3", "ctr", "lr", "xer", "ccr",
+#ifdef CONFIG_PPC64
+	"softe",
+#else
+	"mq",
+#endif
 	"trap", "dar", "dsisr", "res"
 };
 
@@ -2280,8 +2338,7 @@ scannl(void)
 		c = inchar();
 }
 
-int
-hexdigit(int c)
+int hexdigit(int c)
 {
 	if( '0' <= c && c <= '9' )
 		return c - '0';
@@ -2322,7 +2379,7 @@ int
 inchar(void)
 {
 	if (lineptr == NULL || *lineptr == 0) {
-		if (fgets(line, sizeof(line), stdin) == NULL) {
+		if (xmon_gets(line, sizeof(line)) == NULL) {
 			lineptr = NULL;
 			return EOF;
 		}
@@ -2378,7 +2435,7 @@ static void xmon_print_symbol(unsigned long address, const char *mid,
 	const char *name = NULL;
 	unsigned long offset, size;
 
-	printf("%.16lx", address);
+	printf(REG, address);
 	if (setjmp(bus_error_jmp) == 0) {
 		catch_memory_errors = 1;
 		sync();
@@ -2399,55 +2456,7 @@ static void xmon_print_symbol(unsigned long address, const char *mid,
 	printf("%s", after);
 }
 
-static void debug_trace(void)
-{
-        unsigned long val, cmd, on;
-
-	cmd = skipbl();
-	if (cmd == '\n') {
-		/* show current state */
-		unsigned long i;
-		printf("ppc64_debug_switch = 0x%lx\n", ppc64_debug_switch);
-		for (i = 0; i < PPCDBG_NUM_FLAGS ;i++) {
-			on = PPCDBG_BITVAL(i) & ppc64_debug_switch;
-			printf("%02x %s %12s   ", i, on ? "on " : "off",  trace_names[i] ? trace_names[i] : "");
-			if (((i+1) % 3) == 0)
-				printf("\n");
-		}
-		printf("\n");
-		return;
-	}
-	while (cmd != '\n') {
-		on = 1;	/* default if no sign given */
-		while (cmd == '+' || cmd == '-') {
-			on = (cmd == '+');
-			cmd = inchar();
-			if (cmd == ' ' || cmd == '\n') {  /* Turn on or off based on + or - */
-				ppc64_debug_switch = on ? PPCDBG_ALL:PPCDBG_NONE;
-				printf("Setting all values to %s...\n", on ? "on" : "off");
-				if (cmd == '\n') return;
-				else cmd = skipbl(); 
-			}
-			else
-				termch = cmd;
-		}
-		termch = cmd;	/* not +/- ... let scanhex see it */
-		scanhex((void *)&val);
-		if (val >= 64) {
-			printf("Value %x out of range:\n", val);
-			return;
-		}
-		if (on) {
-			ppc64_debug_switch |= PPCDBG_BITVAL(val);
-			printf("enable debug %x %s\n", val, trace_names[val] ? trace_names[val] : "");
-		} else {
-			ppc64_debug_switch &= ~PPCDBG_BITVAL(val);
-			printf("disable debug %x %s\n", val, trace_names[val] ? trace_names[val] : "");
-		}
-		cmd = skipbl();
-	}
-}
-
+#ifdef CONFIG_PPC64
 static void dump_slb(void)
 {
 	int i;
@@ -2484,6 +2493,27 @@ static void dump_stab(void)
 	}
 }
 
+void dump_segments(void)
+{
+	if (cpu_has_feature(CPU_FTR_SLB))
+		dump_slb();
+	else
+		dump_stab();
+}
+#endif
+
+#ifdef CONFIG_PPC_STD_MMU_32
+void dump_segments(void)
+{
+	int i;
+
+	printf("sr0-15 =");
+	for (i = 0; i < 16; ++i)
+		printf(" %x", mfsrin(i));
+	printf("\n");
+}
+#endif
+
 void xmon_init(int enable)
 {
 	if (enable) {
@@ -2503,12 +2533,29 @@ void xmon_init(int enable)
 		__debugger_dabr_match = NULL;
 		__debugger_fault_handler = NULL;
 	}
+	xmon_map_scc();
 }
 
-void dump_segments(void)
+#ifdef CONFIG_MAGIC_SYSRQ
+static void sysrq_handle_xmon(int key, struct pt_regs *pt_regs,
+			      struct tty_struct *tty) 
 {
-	if (cpu_has_feature(CPU_FTR_SLB))
-		dump_slb();
-	else
-		dump_stab();
+	/* ensure xmon is enabled */
+	xmon_init(1);
+	debugger(pt_regs);
+}
+
+static struct sysrq_key_op sysrq_xmon_op = 
+{
+	.handler =	sysrq_handle_xmon,
+	.help_msg =	"Xmon",
+	.action_msg =	"Entering xmon",
+};
+
+static int __init setup_xmon_sysrq(void)
+{
+	register_sysrq_key('x', &sysrq_xmon_op);
+	return 0;
 }
+__initcall(setup_xmon_sysrq);
+#endif /* CONFIG_MAGIC_SYSRQ */
diff --git a/arch/ppc/4xx_io/serial_sicc.c b/arch/ppc/4xx_io/serial_sicc.c
index e95c48d57571..84d96b857e4a 100644
--- a/arch/ppc/4xx_io/serial_sicc.c
+++ b/arch/ppc/4xx_io/serial_sicc.c
@@ -1145,8 +1145,8 @@ static int set_serial_info(struct SICC_info *info,
     info->flags = ((state->flags & ~ASYNC_INTERNAL_FLAGS) |
                (info->flags & ASYNC_INTERNAL_FLAGS));
     state->custom_divisor = new_serial.custom_divisor;
-    state->close_delay = new_serial.close_delay * HZ / 100;
-    state->closing_wait = new_serial.closing_wait * HZ / 100;
+    state->close_delay = msecs_to_jiffies(10 * new_serial.close_delay);
+    state->closing_wait = msecs_to_jiffies(10 * new_serial.closing_wait);
     info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
     port->fifosize = new_serial.xmit_fifo_size;
 
@@ -1465,10 +1465,8 @@ static void siccuart_close(struct tty_struct *tty, struct file *filp)
     info->event = 0;
     info->tty = NULL;
     if (info->blocked_open) {
-        if (info->state->close_delay) {
-            set_current_state(TASK_INTERRUPTIBLE);
-            schedule_timeout(info->state->close_delay);
-        }
+        if (info->state->close_delay)
+            schedule_timeout_interruptible(info->state->close_delay);
         wake_up_interruptible(&info->open_wait);
     }
     info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
@@ -1496,7 +1494,7 @@ static void siccuart_wait_until_sent(struct tty_struct *tty, int timeout)
      * Note: we have to use pretty tight timings here to satisfy
      * the NIST-PCTS.
      */
-    char_time = (info->timeout - HZ/50) / info->port->fifosize;
+    char_time = (info->timeout - msecs_to_jiffies(20)) / info->port->fifosize;
     char_time = char_time / 5;
     if (char_time == 0)
         char_time = 1;
@@ -1521,8 +1519,7 @@ static void siccuart_wait_until_sent(struct tty_struct *tty, int timeout)
            tty->index, jiffies,
            expire, char_time);
     while ((readb(info->port->uart_base + BL_SICC_LSR) & _LSR_TX_ALL) != _LSR_TX_ALL) {
-        set_current_state(TASK_INTERRUPTIBLE);
-        schedule_timeout(char_time);
+        schedule_timeout_interruptible(char_time);
         if (signal_pending(current))
             break;
         if (timeout && time_after(jiffies, expire))
@@ -1773,7 +1770,7 @@ int __init siccuart_init(void)
     for (i = 0; i < SERIAL_SICC_NR; i++) {
         struct SICC_state *state = sicc_state + i;
         state->line     = i;
-        state->close_delay  = 5 * HZ / 10;
+        state->close_delay  = msecs_to_jiffies(500);
         state->closing_wait = 30 * HZ;
 	spin_lock_init(&state->sicc_lock);
     }
diff --git a/arch/ppc/8260_io/fcc_enet.c b/arch/ppc/8260_io/fcc_enet.c
index 2086c6ad1147..4edeede9ccfd 100644
--- a/arch/ppc/8260_io/fcc_enet.c
+++ b/arch/ppc/8260_io/fcc_enet.c
@@ -1309,8 +1309,7 @@ static void mii_dm9161_wait(uint mii_reg, struct net_device *dev)
 
 	/* Davicom takes a bit to come up after a reset,
 	 * so wait here for a bit */
-	set_current_state(TASK_UNINTERRUPTIBLE);
-	schedule_timeout(timeout);
+	schedule_timeout_uninterruptible(timeout);
 }
 
 static phy_info_t phy_info_dm9161 = {
diff --git a/arch/ppc/8xx_io/commproc.c b/arch/ppc/8xx_io/commproc.c
index 11726e2a4ec8..579cd40258b9 100644
--- a/arch/ppc/8xx_io/commproc.c
+++ b/arch/ppc/8xx_io/commproc.c
@@ -73,7 +73,7 @@ cpm_mask_irq(unsigned int irq)
 {
 	int cpm_vec = irq - CPM_IRQ_OFFSET;
 
-	((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr &= ~(1 << cpm_vec);
+	out_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr, in_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr) & ~(1 << cpm_vec));
 }
 
 static void
@@ -81,7 +81,7 @@ cpm_unmask_irq(unsigned int irq)
 {
 	int cpm_vec = irq - CPM_IRQ_OFFSET;
 
-	((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr |= (1 << cpm_vec);
+	out_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr, in_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr) | (1 << cpm_vec));
 }
 
 static void
@@ -95,7 +95,7 @@ cpm_eoi(unsigned int irq)
 {
 	int cpm_vec = irq - CPM_IRQ_OFFSET;
 
-	((immap_t *)IMAP_ADDR)->im_cpic.cpic_cisr = (1 << cpm_vec);
+	out_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cisr, (1 << cpm_vec));
 }
 
 struct hw_interrupt_type cpm_pic = {
@@ -133,7 +133,7 @@ m8xx_cpm_reset(void)
 	 * manual recommends it.
 	 * Bit 25, FAM can also be set to use FEC aggressive mode (860T).
 	 */
-	imp->im_siu_conf.sc_sdcr = 1;
+	out_be32(&imp->im_siu_conf.sc_sdcr, 1),
 
 	/* Reclaim the DP memory for our use. */
 	m8xx_cpm_dpinit();
@@ -178,10 +178,10 @@ cpm_interrupt_init(void)
 
 	/* Initialize the CPM interrupt controller.
 	*/
-	((immap_t *)IMAP_ADDR)->im_cpic.cpic_cicr =
+	out_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cicr,
 	    (CICR_SCD_SCC4 | CICR_SCC_SCC3 | CICR_SCB_SCC2 | CICR_SCA_SCC1) |
-		((CPM_INTERRUPT/2) << 13) | CICR_HP_MASK;
-	((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr = 0;
+		((CPM_INTERRUPT/2) << 13) | CICR_HP_MASK);
+	out_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr, 0);
 
         /* install the CPM interrupt controller routines for the CPM
          * interrupt vectors
@@ -198,7 +198,7 @@ cpm_interrupt_init(void)
 	if (setup_irq(CPM_IRQ_OFFSET + CPMVEC_ERROR, &cpm_error_irqaction))
 		panic("Could not allocate CPM error IRQ!");
 
-	((immap_t *)IMAP_ADDR)->im_cpic.cpic_cicr |= CICR_IEN;
+	out_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cicr, in_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cicr) | CICR_IEN);
 }
 
 /*
@@ -212,8 +212,8 @@ cpm_get_irq(struct pt_regs *regs)
 	/* Get the vector by setting the ACK bit and then reading
 	 * the register.
 	 */
-	((volatile immap_t *)IMAP_ADDR)->im_cpic.cpic_civr = 1;
-	cpm_vec = ((volatile immap_t *)IMAP_ADDR)->im_cpic.cpic_civr;
+	out_be16(&((volatile immap_t *)IMAP_ADDR)->im_cpic.cpic_civr, 1);
+	cpm_vec = in_be16(&((volatile immap_t *)IMAP_ADDR)->im_cpic.cpic_civr);
 	cpm_vec >>= 11;
 
 	return cpm_vec;
@@ -388,9 +388,8 @@ void m8xx_cpm_dpinit(void)
 
 /*
  * Allocate the requested size worth of DP memory.
- * This function used to return an index into the DPRAM area.
- * Now it returns the actuall physical address of that area.
- * use m8xx_cpm_dpram_offset() to get the index
+ * This function returns an offset into the DPRAM area.
+ * Use cpm_dpram_addr() to get the virtual address of the area.
  */
 uint cpm_dpalloc(uint size, uint align)
 {
diff --git a/arch/ppc/8xx_io/cs4218.h b/arch/ppc/8xx_io/cs4218.h
index a3c38c5a5db2..f1c7392255f8 100644
--- a/arch/ppc/8xx_io/cs4218.h
+++ b/arch/ppc/8xx_io/cs4218.h
@@ -78,7 +78,7 @@ typedef struct {
     const char *name2;
     void (*open)(void);
     void (*release)(void);
-    void *(*dma_alloc)(unsigned int, int);
+    void *(*dma_alloc)(unsigned int, gfp_t);
     void (*dma_free)(void *, unsigned int);
     int (*irqinit)(void);
 #ifdef MODULE
diff --git a/arch/ppc/8xx_io/cs4218_tdm.c b/arch/ppc/8xx_io/cs4218_tdm.c
index 2ca9ec7ec3a7..49eb2a7e65c0 100644
--- a/arch/ppc/8xx_io/cs4218_tdm.c
+++ b/arch/ppc/8xx_io/cs4218_tdm.c
@@ -318,7 +318,7 @@ struct cs_sound_settings {
 
 static struct cs_sound_settings sound;
 
-static void *CS_Alloc(unsigned int size, int flags);
+static void *CS_Alloc(unsigned int size, gfp_t flags);
 static void CS_Free(void *ptr, unsigned int size);
 static int CS_IrqInit(void);
 #ifdef MODULE
@@ -959,7 +959,7 @@ static TRANS transCSNormalRead = {
 
 /*** Low level stuff *********************************************************/
 
-static void *CS_Alloc(unsigned int size, int flags)
+static void *CS_Alloc(unsigned int size, gfp_t flags)
 {
 	int	order;
 
@@ -1013,8 +1013,7 @@ static void CS_IrqCleanup(void)
 	*/
 	cpm_free_handler(CPMVEC_SMC2);
 
-	if (beep_buf)
-		kfree(beep_buf);
+	kfree(beep_buf);
 	kd_mksound = orig_mksound;
 }
 #endif /* MODULE */
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index 776941c75672..8fa51b0a32d2 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -568,6 +568,7 @@ config CHESTNUT
 
 config SPRUCE
 	bool "IBM-Spruce"
+	select PPC_INDIRECT_PCI
 
 config HDPU
 	bool "Sky-HDPU"
@@ -588,27 +589,35 @@ config EV64260
 
 config LOPEC
 	bool "Motorola-LoPEC"
+	select PPC_I8259
 
 config MVME5100
 	bool "Motorola-MVME5100"
+	select PPC_INDIRECT_PCI
 
 config PPLUS
 	bool "Motorola-PowerPlus"
+	select PPC_I8259
+	select PPC_INDIRECT_PCI
 
 config PRPMC750
 	bool "Motorola-PrPMC750"
+	select PPC_INDIRECT_PCI
 
 config PRPMC800
 	bool "Motorola-PrPMC800"
+	select PPC_INDIRECT_PCI
 
 config SANDPOINT
 	bool "Motorola-Sandpoint"
+	select PPC_I8259
 	help
 	  Select SANDPOINT if configuring for a Motorola Sandpoint X3
 	  (any flavor).
 
 config RADSTONE_PPC7D
 	bool "Radstone Technology PPC7D board"
+	select PPC_I8259
 
 config PAL4
 	bool "SBS-Palomar4"
@@ -616,6 +625,7 @@ config PAL4
 config GEMINI
 	bool "Synergy-Gemini"
 	depends on BROKEN
+	select PPC_INDIRECT_PCI
 	help
 	  Select Gemini if configuring for a Synergy Microsystems' Gemini
 	  series Single Board Computer.  More information is available at:
@@ -736,6 +746,16 @@ config MPC834x
 	bool
 	default y if MPC834x_SYS
 
+config CPM1
+	bool
+	depends on 8xx
+	default y
+	help
+	  The CPM1 (Communications Processor Module) is a coprocessor on
+	  embedded CPUs made by Motorola.  Selecting this option means that
+	  you wish to build a kernel for a machine with a CPM1 coprocessor
+	  on it (8xx, 827x, 8560).
+
 config CPM2
 	bool
 	depends on 8260 || MPC8560 || MPC8555
@@ -747,13 +767,16 @@ config CPM2
 	  on it (826x, 827x, 8560).
 
 config PPC_CHRP
-	bool
+	bool "  Common Hardware Reference Platform (CHRP) based machines"
 	depends on PPC_MULTIPLATFORM
+	select PPC_I8259
+	select PPC_INDIRECT_PCI
 	default y
 
 config PPC_PMAC
-	bool
+	bool "  Apple PowerMac based machines"
 	depends on PPC_MULTIPLATFORM
+	select PPC_INDIRECT_PCI
 	default y
 
 config PPC_PMAC64
@@ -762,8 +785,10 @@ config PPC_PMAC64
 	default y
 
 config PPC_PREP
-	bool
+	bool "  PowerPC Reference Platform (PReP) based machines"
 	depends on PPC_MULTIPLATFORM
+	select PPC_I8259
+	select PPC_INDIRECT_PCI
 	default y
 
 config PPC_OF
@@ -797,6 +822,7 @@ config MV64360		# Really MV64360 & MV64460
 config MV64X60
 	bool
 	depends on (GT64260 || MV64360)
+	select PPC_INDIRECT_PCI
 	default y
 
 menu "Set bridge options"
@@ -845,6 +871,7 @@ config EPIC_SERIAL_MODE
 config MPC10X_BRIDGE
 	bool
 	depends on POWERPMC250 || LOPEC || SANDPOINT
+	select PPC_INDIRECT_PCI
 	default y
 
 config MPC10X_OPENPIC
@@ -870,6 +897,7 @@ config HARRIER_STORE_GATHERING
 config MVME5100_IPMC761_PRESENT
 	bool "MVME5100 configured with an IPMC761"
 	depends on MVME5100
+	select PPC_I8259
 
 config SPRUCE_BAUD_33M
 	bool "Spruce baud clock support"
@@ -1127,6 +1155,7 @@ menu "Bus options"
 config ISA
 	bool "Support for ISA-bus hardware"
 	depends on PPC_PREP || PPC_CHRP
+	select PPC_I8259
 	help
 	  Find out whether you have ISA slots on your motherboard.  ISA is the
 	  name of a bus system, i.e. the way the CPU talks to the other stuff
@@ -1139,6 +1168,17 @@ config GENERIC_ISA_DMA
 	depends on POWER3 || POWER4 || 6xx && !CPM2
 	default y
 
+config PPC_I8259
+	bool
+	default y if 85xx
+	default n
+
+config PPC_INDIRECT_PCI
+	bool
+	depends on PCI
+	default y if 40x || 44x || 85xx || 83xx
+	default n
+
 config EISA
 	bool
 	help
@@ -1175,6 +1215,7 @@ config MPC83xx_PCI2
 config PCI_QSPAN
 	bool "QSpan PCI"
 	depends on !4xx && !CPM2 && 8xx
+	select PPC_I8259
 	help
 	  Say Y here if you have a system based on a Motorola 8xx-series
 	  embedded processor with a QSPAN PCI interface, otherwise say N.
@@ -1182,6 +1223,7 @@ config PCI_QSPAN
 config PCI_8260
 	bool
 	depends on PCI && 8260
+	select PPC_INDIRECT_PCI
 	default y
 
 config 8260_PCI9
@@ -1215,6 +1257,14 @@ source "drivers/pci/Kconfig"
 
 source "drivers/pcmcia/Kconfig"
 
+config RAPIDIO
+	bool "RapidIO support" if MPC8540 || MPC8560
+	help
+	  If you say Y here, the kernel will include drivers and
+	  infrastructure code to support RapidIO interconnect devices.
+
+source "drivers/rapidio/Kconfig"
+
 endmenu
 
 menu "Advanced setup"
@@ -1368,7 +1418,7 @@ endmenu
 
 source "lib/Kconfig"
 
-source "arch/ppc/oprofile/Kconfig"
+source "arch/powerpc/oprofile/Kconfig"
 
 source "arch/ppc/Kconfig.debug"
 
diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile
index 16e2675f3270..e719a4933af1 100644
--- a/arch/ppc/Makefile
+++ b/arch/ppc/Makefile
@@ -26,6 +26,10 @@ CPPFLAGS	+= -Iarch/$(ARCH) -Iarch/$(ARCH)/include
 AFLAGS		+= -Iarch/$(ARCH)
 CFLAGS		+= -Iarch/$(ARCH) -msoft-float -pipe \
 		-ffixed-r2 -mmultiple
+
+# No AltiVec instruction when building kernel
+CFLAGS		+= $(call cc-option, -mno-altivec)
+
 CPP		= $(CC) -E $(CFLAGS)
 # Temporary hack until we have migrated to asm-powerpc
 LINUXINCLUDE    += -Iarch/$(ARCH)/include
@@ -57,10 +61,13 @@ head-$(CONFIG_FSL_BOOKE)	:= arch/ppc/kernel/head_fsl_booke.o
 
 head-$(CONFIG_6xx)		+= arch/ppc/kernel/idle_6xx.o
 head-$(CONFIG_POWER4)		+= arch/ppc/kernel/idle_power4.o
-head-$(CONFIG_PPC_FPU)		+= arch/ppc/kernel/fpu.o
+head-$(CONFIG_PPC_FPU)		+= arch/powerpc/kernel/fpu.o
 
-core-y				+= arch/ppc/kernel/ arch/ppc/platforms/ \
-				   arch/ppc/mm/ arch/ppc/lib/ arch/ppc/syslib/
+core-y				+= arch/ppc/kernel/ arch/powerpc/kernel/ \
+				   arch/ppc/platforms/ \
+				   arch/ppc/mm/ arch/ppc/lib/ \
+				   arch/ppc/syslib/ arch/powerpc/sysdev/ \
+				   arch/powerpc/lib/
 core-$(CONFIG_4xx)		+= arch/ppc/platforms/4xx/
 core-$(CONFIG_83xx)		+= arch/ppc/platforms/83xx/
 core-$(CONFIG_85xx)		+= arch/ppc/platforms/85xx/
@@ -71,7 +78,7 @@ drivers-$(CONFIG_8xx)		+= arch/ppc/8xx_io/
 drivers-$(CONFIG_4xx)		+= arch/ppc/4xx_io/
 drivers-$(CONFIG_CPM2)		+= arch/ppc/8260_io/
 
-drivers-$(CONFIG_OPROFILE)	+= arch/ppc/oprofile/
+drivers-$(CONFIG_OPROFILE)	+= arch/powerpc/oprofile/
 
 BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm
 
diff --git a/arch/ppc/boot/include/of1275.h b/arch/ppc/boot/include/of1275.h
index 69173df76db0..4ed88acfa73a 100644
--- a/arch/ppc/boot/include/of1275.h
+++ b/arch/ppc/boot/include/of1275.h
@@ -19,6 +19,9 @@ extern prom_entry of_prom_entry;
 
 /* function declarations */
 
+int	call_prom(const char *service, int nargs, int nret, ...);
+int	call_prom_ret(const char *service, int nargs, int nret,
+		      unsigned int *rets, ...);
 void *	claim(unsigned int virt, unsigned int size, unsigned int align);
 int	map(unsigned int phys, unsigned int virt, unsigned int size);
 void	enter(void);
diff --git a/arch/ppc/boot/ld.script b/arch/ppc/boot/ld.script
index 9362193742ac..d4dd8f15395e 100644
--- a/arch/ppc/boot/ld.script
+++ b/arch/ppc/boot/ld.script
@@ -1,4 +1,4 @@
-OUTPUT_ARCH(powerpc)
+OUTPUT_ARCH(powerpc:common)
 SECTIONS
 {
   /* Read-only sections, merged into text segment: */
diff --git a/arch/ppc/boot/of1275/Makefile b/arch/ppc/boot/of1275/Makefile
index 02e6f235d7cb..0b979c004972 100644
--- a/arch/ppc/boot/of1275/Makefile
+++ b/arch/ppc/boot/of1275/Makefile
@@ -3,4 +3,4 @@
 #
 
 lib-y := claim.o enter.o exit.o finddevice.o getprop.o ofinit.o	\
-	 ofstdio.o read.o release.o write.o map.o
+	 ofstdio.o read.o release.o write.o map.o call_prom.o
diff --git a/arch/ppc/boot/of1275/call_prom.c b/arch/ppc/boot/of1275/call_prom.c
new file mode 100644
index 000000000000..9479a3a2b8c7
--- /dev/null
+++ b/arch/ppc/boot/of1275/call_prom.c
@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) 1996-2005 Paul Mackerras.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include "of1275.h"
+#include <stdarg.h>
+
+int call_prom(const char *service, int nargs, int nret, ...)
+{
+	int i;
+	struct prom_args {
+		const char *service;
+		int nargs;
+		int nret;
+		unsigned int args[12];
+	} args;
+	va_list list;
+
+	args.service = service;
+	args.nargs = nargs;
+	args.nret = nret;
+
+	va_start(list, nret);
+	for (i = 0; i < nargs; i++)
+		args.args[i] = va_arg(list, unsigned int);
+	va_end(list);
+
+	for (i = 0; i < nret; i++)
+		args.args[nargs+i] = 0;
+
+	if (of_prom_entry(&args) < 0)
+		return -1;
+
+	return (nret > 0)? args.args[nargs]: 0;
+}
+
+int call_prom_ret(const char *service, int nargs, int nret,
+		  unsigned int *rets, ...)
+{
+	int i;
+	struct prom_args {
+		const char *service;
+		int nargs;
+		int nret;
+		unsigned int args[12];
+	} args;
+	va_list list;
+
+	args.service = service;
+	args.nargs = nargs;
+	args.nret = nret;
+
+	va_start(list, rets);
+	for (i = 0; i < nargs; i++)
+		args.args[i] = va_arg(list, unsigned int);
+	va_end(list);
+
+	for (i = 0; i < nret; i++)
+		args.args[nargs+i] = 0;
+
+	if (of_prom_entry(&args) < 0)
+		return -1;
+
+	if (rets != (void *) 0)
+		for (i = 1; i < nret; ++i)
+			rets[i-1] = args.args[nargs+i];
+
+	return (nret > 0)? args.args[nargs]: 0;
+}
diff --git a/arch/ppc/boot/of1275/claim.c b/arch/ppc/boot/of1275/claim.c
index e060292ae2a7..1ed3aeeff8ae 100644
--- a/arch/ppc/boot/of1275/claim.c
+++ b/arch/ppc/boot/of1275/claim.c
@@ -9,26 +9,84 @@
  */
 
 #include "of1275.h"
+#include "nonstdio.h"
 
-void *
-claim(unsigned int virt, unsigned int size, unsigned int align)
+/*
+ * Older OF's require that when claiming a specific range of addresses,
+ * we claim the physical space in the /memory node and the virtual
+ * space in the chosen mmu node, and then do a map operation to
+ * map virtual to physical.
+ */
+static int need_map = -1;
+static ihandle chosen_mmu;
+static phandle memory;
+
+/* returns true if s2 is a prefix of s1 */
+static int string_match(const char *s1, const char *s2)
+{
+	for (; *s2; ++s2)
+		if (*s1++ != *s2)
+			return 0;
+	return 1;
+}
+
+static int check_of_version(void)
+{
+	phandle oprom, chosen;
+	char version[64];
+
+	oprom = finddevice("/openprom");
+	if (oprom == OF_INVALID_HANDLE)
+		return 0;
+	if (getprop(oprom, "model", version, sizeof(version)) <= 0)
+		return 0;
+	version[sizeof(version)-1] = 0;
+	printf("OF version = '%s'\n", version);
+	if (!string_match(version, "Open Firmware, 1.")
+	    && !string_match(version, "FirmWorks,3."))
+		return 0;
+	chosen = finddevice("/chosen");
+	if (chosen == OF_INVALID_HANDLE) {
+		chosen = finddevice("/chosen@0");
+		if (chosen == OF_INVALID_HANDLE) {
+			printf("no chosen\n");
+			return 0;
+		}
+	}
+	if (getprop(chosen, "mmu", &chosen_mmu, sizeof(chosen_mmu)) <= 0) {
+		printf("no mmu\n");
+		return 0;
+	}
+	memory = (ihandle) call_prom("open", 1, 1, "/memory");
+	if (memory == OF_INVALID_HANDLE) {
+		memory = (ihandle) call_prom("open", 1, 1, "/memory@0");
+		if (memory == OF_INVALID_HANDLE) {
+			printf("no memory node\n");
+			return 0;
+		}
+	}
+	printf("old OF detected\n");
+	return 1;
+}
+
+void *claim(unsigned int virt, unsigned int size, unsigned int align)
 {
-    struct prom_args {
-	char *service;
-	int nargs;
-	int nret;
-	unsigned int virt;
-	unsigned int size;
-	unsigned int align;
-	void *ret;
-    } args;
+	int ret;
+	unsigned int result;
 
-    args.service = "claim";
-    args.nargs = 3;
-    args.nret = 1;
-    args.virt = virt;
-    args.size = size;
-    args.align = align;
-    (*of_prom_entry)(&args);
-    return args.ret;
+	if (need_map < 0)
+		need_map = check_of_version();
+	if (align || !need_map)
+		return (void *) call_prom("claim", 3, 1, virt, size, align);
+	
+	ret = call_prom_ret("call-method", 5, 2, &result, "claim", memory,
+			    align, size, virt);
+	if (ret != 0 || result == -1)
+		return (void *) -1;
+	ret = call_prom_ret("call-method", 5, 2, &result, "claim", chosen_mmu,
+			    align, size, virt);
+	/* 0x12 == coherent + read/write */
+	ret = call_prom("call-method", 6, 1, "map", chosen_mmu,
+			0x12, size, virt, virt);
+	return virt;
 }
diff --git a/arch/ppc/boot/of1275/finddevice.c b/arch/ppc/boot/of1275/finddevice.c
index 2c0f7cbb793e..0dcb1201b772 100644
--- a/arch/ppc/boot/of1275/finddevice.c
+++ b/arch/ppc/boot/of1275/finddevice.c
@@ -10,22 +10,7 @@
 
 #include "of1275.h"
 
-phandle
-finddevice(const char *name)
+phandle finddevice(const char *name)
 {
-    struct prom_args {
-	char *service;
-	int nargs;
-	int nret;
-	const char *devspec;
-	phandle device;
-    } args;
-
-    args.service = "finddevice";
-    args.nargs = 1;
-    args.nret = 1;
-    args.devspec = name;
-    args.device = OF_INVALID_HANDLE;
-    (*of_prom_entry)(&args);
-    return args.device;
+	return (phandle) call_prom("finddevice", 1, 1, name);
 }
diff --git a/arch/ppc/boot/openfirmware/Makefile b/arch/ppc/boot/openfirmware/Makefile
index 03415238fabf..83a6433459ce 100644
--- a/arch/ppc/boot/openfirmware/Makefile
+++ b/arch/ppc/boot/openfirmware/Makefile
@@ -80,8 +80,7 @@ $(obj)/note: $(utils)/mknote FORCE
 	$(call if_changed,mknote)
 
 
-$(obj)/coffcrt0.o: EXTRA_AFLAGS := -traditional -DXCOFF
-$(obj)/crt0.o:     EXTRA_AFLAGS := -traditional
+$(obj)/coffcrt0.o: EXTRA_AFLAGS := -DXCOFF
 targets += coffcrt0.o crt0.o
 $(obj)/coffcrt0.o $(obj)/crt0.o: $(common)/crt0.S FORCE
 	$(call if_changed_dep,as_o_S)
diff --git a/arch/ppc/boot/openfirmware/chrpmain.c b/arch/ppc/boot/openfirmware/chrpmain.c
index effe4a0624b0..245dbd9fc120 100644
--- a/arch/ppc/boot/openfirmware/chrpmain.c
+++ b/arch/ppc/boot/openfirmware/chrpmain.c
@@ -78,7 +78,7 @@ boot(int a1, int a2, void *prom)
 	begin_avail = avail_high = avail_ram;
 	end_avail = scratch + sizeof(scratch);
 	printf("gunzipping (0x%p <- 0x%p:0x%p)...", dst, im, im+len);
-	gunzip(dst, 0x400000, im, &len);
+	gunzip(dst, PROG_SIZE - PROG_START, im, &len);
 	printf("done %u bytes\n\r", len);
 	printf("%u bytes of heap consumed, max in use %u\n\r",
 	       avail_high - begin_avail, heap_max);
diff --git a/arch/ppc/boot/openfirmware/coffmain.c b/arch/ppc/boot/openfirmware/coffmain.c
index 04ba9d57e110..2da8855e2be0 100644
--- a/arch/ppc/boot/openfirmware/coffmain.c
+++ b/arch/ppc/boot/openfirmware/coffmain.c
@@ -38,7 +38,7 @@ static char heap[SCRATCH_SIZE];
 static unsigned long ram_start = 0;
 static unsigned long ram_end = 0x1000000;
 
-static unsigned long prog_start = 0x900000;
+static unsigned long prog_start = 0x800000;
 static unsigned long prog_size = 0x700000;
 
 typedef void (*kernel_start_t)(int, int, void *);
diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile
index b7bd8f61a4ad..f3e9c534aa82 100644
--- a/arch/ppc/boot/simple/Makefile
+++ b/arch/ppc/boot/simple/Makefile
@@ -67,6 +67,12 @@ zimageinitrd-$(CONFIG_BAMBOO)		:= zImage.initrd-TREE
   entrypoint-$(CONFIG_BAMBOO)		:= 0x01000000
      extra.o-$(CONFIG_BAMBOO)		:= pibs.o
 
+      zimage-$(CONFIG_BUBINGA)		:= zImage-TREE
+zimageinitrd-$(CONFIG_BUBINGA)		:= zImage.initrd-TREE
+         end-$(CONFIG_BUBINGA)		:= bubinga
+  entrypoint-$(CONFIG_BUBINGA)		:= 0x01000000
+     extra.o-$(CONFIG_BUBINGA)		:= openbios.o
+
       zimage-$(CONFIG_EBONY)		:= zImage-TREE
 zimageinitrd-$(CONFIG_EBONY)		:= zImage.initrd-TREE
          end-$(CONFIG_EBONY)		:= ebony
@@ -79,12 +85,30 @@ zimageinitrd-$(CONFIG_LUAN)		:= zImage.initrd-TREE
   entrypoint-$(CONFIG_LUAN)		:= 0x01000000
      extra.o-$(CONFIG_LUAN)		:= pibs.o
 
+      zimage-$(CONFIG_YUCCA)		:= zImage-TREE
+zimageinitrd-$(CONFIG_YUCCA)		:= zImage.initrd-TREE
+         end-$(CONFIG_YUCCA)		:= yucca
+  entrypoint-$(CONFIG_YUCCA)		:= 0x01000000
+     extra.o-$(CONFIG_YUCCA)		:= pibs.o
+
       zimage-$(CONFIG_OCOTEA)		:= zImage-TREE
 zimageinitrd-$(CONFIG_OCOTEA)		:= zImage.initrd-TREE
          end-$(CONFIG_OCOTEA)		:= ocotea
   entrypoint-$(CONFIG_OCOTEA)		:= 0x01000000
      extra.o-$(CONFIG_OCOTEA)		:= pibs.o
 
+      zimage-$(CONFIG_SYCAMORE)		:= zImage-TREE
+zimageinitrd-$(CONFIG_SYCAMORE)		:= zImage.initrd-TREE
+         end-$(CONFIG_SYCAMORE)		:= sycamore
+  entrypoint-$(CONFIG_SYCAMORE)		:= 0x01000000
+     extra.o-$(CONFIG_SYCAMORE)		:= openbios.o
+
+      zimage-$(CONFIG_WALNUT)		:= zImage-TREE
+zimageinitrd-$(CONFIG_WALNUT)		:= zImage.initrd-TREE
+         end-$(CONFIG_WALNUT)		:= walnut
+  entrypoint-$(CONFIG_WALNUT)		:= 0x01000000
+     extra.o-$(CONFIG_WALNUT)		:= openbios.o
+
      extra.o-$(CONFIG_EV64260)		:= misc-ev64260.o
          end-$(CONFIG_EV64260)		:= ev64260
    cacheflag-$(CONFIG_EV64260)		:= -include $(clear_L2_L3)
@@ -162,7 +186,8 @@ OBJCOPY_ARGS			:= -O elf32-powerpc
 
 # head.o and relocate.o must be at the start.
 boot-y				:= head.o relocate.o $(extra.o-y) $(misc-y)
-boot-$(CONFIG_40x)		+= embed_config.o
+boot-$(CONFIG_REDWOOD_5)	+= embed_config.o
+boot-$(CONFIG_REDWOOD_6)	+= embed_config.o
 boot-$(CONFIG_8xx)		+= embed_config.o
 boot-$(CONFIG_8260)		+= embed_config.o
 boot-$(CONFIG_BSEIP)		+= iic.o
@@ -237,11 +262,11 @@ $(images)/zImage.initrd-STRIPELF: $(obj)/zvmlinux.initrd
 		skip=64 bs=1k
 
 $(images)/zImage-TREE: $(obj)/zvmlinux $(MKTREE)
-	$(MKTREE) $(obj)/zvmlinux $(images)/zImage.$(end-y) $(ENTRYPOINT)
+	$(MKTREE) $(obj)/zvmlinux $(images)/zImage.$(end-y) $(entrypoint-y)
 
 $(images)/zImage.initrd-TREE: $(obj)/zvmlinux.initrd $(MKTREE)
 	$(MKTREE) $(obj)/zvmlinux.initrd $(images)/zImage.initrd.$(end-y) \
-		$(ENTRYPOINT)
+		$(entrypoint-y)
 
 $(images)/zImage-PPLUS: $(obj)/zvmlinux $(MKPREP) $(MKBUGBOOT)
 	$(MKPREP) -pbp $(obj)/zvmlinux $(images)/zImage.$(end-y)
diff --git a/arch/ppc/boot/simple/misc.c b/arch/ppc/boot/simple/misc.c
index e02de5b467a4..f415d6c62362 100644
--- a/arch/ppc/boot/simple/misc.c
+++ b/arch/ppc/boot/simple/misc.c
@@ -23,7 +23,7 @@
 #include <asm/page.h>
 #include <asm/mmu.h>
 #include <asm/bootinfo.h>
-#ifdef CONFIG_44x
+#ifdef CONFIG_4xx
 #include <asm/ibm4xx.h>
 #endif
 #include <asm/reg.h>
@@ -88,6 +88,14 @@ get_mem_size(void)
 	return 0;
 }
 
+#if defined(CONFIG_40x)
+#define PPC4xx_EMAC0_MR0	EMAC0_BASE
+#endif
+
+#if defined(CONFIG_44x) && defined(PPC44x_EMAC0_MR0)
+#define PPC4xx_EMAC0_MR0	PPC44x_EMAC0_MR0
+#endif
+
 struct bi_record *
 decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum)
 {
@@ -103,13 +111,13 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum)
 	com_port = serial_init(0, NULL);
 #endif
 
-#if defined(CONFIG_44x) && defined(PPC44x_EMAC0_MR0)
+#if defined(PPC4xx_EMAC0_MR0)
 	/* Reset MAL */
 	mtdcr(DCRN_MALCR(DCRN_MAL_BASE), MALCR_MMSR);
 	/* Wait for reset */
 	while (mfdcr(DCRN_MALCR(DCRN_MAL_BASE)) & MALCR_MMSR) {};
 	/* Reset EMAC */
-	*(volatile unsigned long *)PPC44x_EMAC0_MR0 = 0x20000000;
+	*(volatile unsigned long *)PPC4xx_EMAC0_MR0 = 0x20000000;
 	__asm__ __volatile__("eieio");
 #endif
 
@@ -164,7 +172,9 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum)
 		puts(" "); puthex((unsigned long)(&__ramdisk_end));puts("\n");
 	}
 
+#ifndef CONFIG_40x /* don't overwrite the 40x image located at 0x00400000! */
 	avail_ram = (char *)0x00400000;
+#endif
 	end_avail = (char *)0x00800000;
 	puts("avail ram:     "); puthex((unsigned long)avail_ram); puts(" ");
 	puthex((unsigned long)end_avail); puts("\n");
diff --git a/arch/ppc/boot/simple/openbios.c b/arch/ppc/boot/simple/openbios.c
index c732b6d70cfb..81f11d8b30a7 100644
--- a/arch/ppc/boot/simple/openbios.c
+++ b/arch/ppc/boot/simple/openbios.c
@@ -1,19 +1,43 @@
 /*
  * arch/ppc/boot/simple/openbios.c
  *
- * 2005 (c) SYSGO AG - g.jaeger@sysgo.com
+ * Copyright (c) 2005 DENX Software Engineering
+ * Stefan Roese <sr@denx.de>
+ *
+ * Based on original work by
+ *      2005 (c) SYSGO AG - g.jaeger@sysgo.com
+ *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without
  * any warranty of any kind, whether express or implied.
  *
- * Derived from arch/ppc/boot/simple/pibs.c (from MontaVista)
  */
 
 #include <linux/types.h>
 #include <linux/config.h>
 #include <linux/string.h>
 #include <asm/ppcboot.h>
-#include <platforms/4xx/ebony.h>
+#include <asm/ibm4xx.h>
+#include <asm/reg.h>
+#ifdef CONFIG_40x
+#include <asm/io.h>
+#endif
+
+#if defined(CONFIG_BUBINGA)
+#define BOARD_INFO_VECTOR       0xFFF80B50 /* openbios 1.19 moved this vector down  - armin */
+#else
+#define BOARD_INFO_VECTOR	0xFFFE0B50
+#endif
+
+#ifdef CONFIG_40x
+/* Supply a default Ethernet address for those eval boards that don't
+ * ship with one.  This is an address from the MBX board I have, so
+ * it is unlikely you will find it on your network.
+ */
+static	ushort	def_enet_addr[] = { 0x0800, 0x3e26, 0x1559 };
+
+extern unsigned long timebase_period_ns;
+#endif /* CONFIG_40x */
 
 extern unsigned long decompress_kernel(unsigned long load_addr, int num_words,
 				       unsigned long cksum);
@@ -23,15 +47,85 @@ extern unsigned long decompress_kernel(unsigned long load_addr, int num_words,
 bd_t hold_resid_buf __attribute__ ((__section__ (".data.boot")));
 bd_t *hold_residual = &hold_resid_buf;
 
+typedef struct openbios_board_info {
+        unsigned char    bi_s_version[4];       /* Version of this structure */
+        unsigned char    bi_r_version[30];      /* Version of the IBM ROM */
+        unsigned int     bi_memsize;            /* DRAM installed, in bytes */
+#ifdef CONFIG_405EP
+        unsigned char    bi_enetaddr[2][6];     /* Local Ethernet MAC address */
+#else /* CONFIG_405EP */
+        unsigned char    bi_enetaddr[6];        /* Local Ethernet MAC address */
+#endif /* CONFIG_405EP */
+        unsigned char    bi_pci_enetaddr[6];    /* PCI Ethernet MAC address */
+        unsigned int     bi_intfreq;            /* Processor speed, in Hz */
+        unsigned int     bi_busfreq;            /* PLB Bus speed, in Hz */
+        unsigned int     bi_pci_busfreq;        /* PCI Bus speed, in Hz */
+#ifdef CONFIG_405EP
+        unsigned int     bi_opb_busfreq;        /* OPB Bus speed, in Hz */
+        unsigned int     bi_pllouta_freq;       /* PLL OUTA speed, in Hz */
+#endif /* CONFIG_405EP */
+} openbios_bd_t;
+
 void *
 load_kernel(unsigned long load_addr, int num_words, unsigned long cksum,
 		void *ign1, void *ign2)
 {
-	decompress_kernel(load_addr, num_words, cksum);
+#ifdef CONFIG_40x
+	openbios_bd_t *openbios_bd = NULL;
+	openbios_bd_t *(*get_board_info)(void) =
+		(openbios_bd_t *(*)(void))(*(unsigned long *)BOARD_INFO_VECTOR);
+
+	/*
+	 * On 40x platforms we not only need the MAC-addresses, but also the
+	 * clocks and memsize. Now try to get all values using the OpenBIOS
+	 * "get_board_info()" callback.
+	 */
+	if ((openbios_bd = get_board_info()) != NULL) {
+		/*
+		 * Copy bd_info from OpenBIOS struct into U-Boot struct
+		 * used by kernel
+		 */
+	        hold_residual->bi_memsize = openbios_bd->bi_memsize;
+	        hold_residual->bi_intfreq = openbios_bd->bi_intfreq;
+	        hold_residual->bi_busfreq = openbios_bd->bi_busfreq;
+	        hold_residual->bi_pci_busfreq = openbios_bd->bi_pci_busfreq;
+		memcpy(hold_residual->bi_pci_enetaddr, openbios_bd->bi_pci_enetaddr, 6);
+#ifdef CONFIG_405EP
+		memcpy(hold_residual->bi_enetaddr, openbios_bd->bi_enetaddr[0], 6);
+		memcpy(hold_residual->bi_enet1addr, openbios_bd->bi_enetaddr[1], 6);
+	        hold_residual->bi_opbfreq = openbios_bd->bi_opb_busfreq;
+	        hold_residual->bi_procfreq = openbios_bd->bi_pllouta_freq;
+#else /* CONFIG_405EP */
+		memcpy(hold_residual->bi_enetaddr, openbios_bd->bi_enetaddr, 6);
+#endif /* CONFIG_405EP */
+	} else {
+		/* Hmmm...better try to stuff some defaults.
+		 */
+		hold_residual->bi_memsize = 16 * 1024 * 1024;
+		hold_residual->bi_intfreq = 200000000;
+		hold_residual->bi_busfreq = 100000000;
+		hold_residual->bi_pci_busfreq = 66666666;
+
+		/*
+		 * Only supply one mac-address in this fallback
+		 */
+		memcpy(hold_residual->bi_enetaddr, (void *)def_enet_addr, 6);
+#ifdef CONFIG_405EP
+	        hold_residual->bi_opbfreq = 50000000;
+	        hold_residual->bi_procfreq = 200000000;
+#endif /* CONFIG_405EP */
+	}
 
+	timebase_period_ns = 1000000000 / hold_residual->bi_intfreq;
+#endif /* CONFIG_40x */
+
+#ifdef CONFIG_440GP
 	/* simply copy the MAC addresses */
-	memcpy(hold_residual->bi_enetaddr,  (char *)EBONY_OPENBIOS_MAC_BASE, 6);
-	memcpy(hold_residual->bi_enet1addr, (char *)(EBONY_OPENBIOS_MAC_BASE+EBONY_OPENBIOS_MAC_OFFSET), 6);
+	memcpy(hold_residual->bi_enetaddr,  (char *)OPENBIOS_MAC_BASE, 6);
+	memcpy(hold_residual->bi_enet1addr, (char *)(OPENBIOS_MAC_BASE+OPENBIOS_MAC_OFFSET), 6);
+#endif /* CONFIG_440GP */
+
+	decompress_kernel(load_addr, num_words, cksum);
 
 	return (void *)hold_residual;
 }
diff --git a/arch/ppc/configs/ev64360_defconfig b/arch/ppc/configs/ev64360_defconfig
index de9bbb791db9..d471e578dcb5 100644
--- a/arch/ppc/configs/ev64360_defconfig
+++ b/arch/ppc/configs/ev64360_defconfig
@@ -1,17 +1,17 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc5
-# Fri Aug  5 15:18:23 2005
+# Linux kernel version: 2.6.14
+# Fri Oct 28 19:15:34 2005
 #
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_PPC=y
 CONFIG_PPC32=y
 CONFIG_GENERIC_NVRAM=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 
 #
 # Code maturity level options
@@ -26,6 +26,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -35,6 +36,7 @@ CONFIG_SYSCTL=y
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -74,7 +76,7 @@ CONFIG_TAU=y
 # CONFIG_TAU_AVERAGE is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_PM is not set
+# CONFIG_WANT_EARLY_SERIAL is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_NOT_COHERENT_CACHE=y
 
@@ -86,22 +88,18 @@ CONFIG_NOT_COHERENT_CACHE=y
 # CONFIG_KATANA is not set
 # CONFIG_WILLOW is not set
 # CONFIG_CPCI690 is not set
-# CONFIG_PCORE is not set
 # CONFIG_POWERPMC250 is not set
 # CONFIG_CHESTNUT is not set
 # CONFIG_SPRUCE is not set
 # CONFIG_HDPU is not set
 # CONFIG_EV64260 is not set
 # CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
 # CONFIG_MVME5100 is not set
 # CONFIG_PPLUS is not set
 # CONFIG_PRPMC750 is not set
 # CONFIG_PRPMC800 is not set
 # CONFIG_SANDPOINT is not set
 # CONFIG_RADSTONE_PPC7D is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
 # CONFIG_PAL4 is not set
 # CONFIG_GEMINI is not set
 # CONFIG_EST8260 is not set
@@ -138,10 +136,13 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyMM0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2"
+# CONFIG_PM is not set
+# CONFIG_SOFTWARE_SUSPEND is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -152,7 +153,6 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -206,14 +206,19 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
 #
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
@@ -239,6 +244,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -252,6 +258,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 CONFIG_MTD=y
@@ -358,7 +369,6 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 
@@ -379,6 +389,7 @@ CONFIG_IOSCHED_CFQ=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 
 #
@@ -420,6 +431,10 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+
+#
 # Ethernet (10 or 100Mbit)
 #
 # CONFIG_NET_ETHERNET is not set
@@ -434,6 +449,7 @@ CONFIG_NETDEVICES=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
@@ -446,6 +462,7 @@ CONFIG_MV643XX_ETH_0=y
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -547,7 +564,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Watchdog Cards
 #
-# CONFIG_WATCHDOG is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_MV64X60_WDT=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -571,7 +601,6 @@ CONFIG_GEN_RTC=y
 # I2C support
 #
 # CONFIG_I2C is not set
-# CONFIG_I2C_SENSOR is not set
 
 #
 # Dallas's 1-wire bus
@@ -582,6 +611,7 @@ CONFIG_GEN_RTC=y
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
@@ -589,6 +619,10 @@ CONFIG_HWMON=y
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -651,10 +685,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -663,6 +693,7 @@ CONFIG_INOTIFY=y
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -683,11 +714,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -735,6 +765,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -751,6 +782,7 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
@@ -767,6 +799,7 @@ CONFIG_ZLIB_DEFLATE=y
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_SERIAL_TEXT_DEBUG is not set
 
 #
 # Security options
diff --git a/arch/ppc/configs/mpc834x_sys_defconfig b/arch/ppc/configs/mpc834x_sys_defconfig
index 4a5522ca8207..673dc64ebcb1 100644
--- a/arch/ppc/configs/mpc834x_sys_defconfig
+++ b/arch/ppc/configs/mpc834x_sys_defconfig
@@ -1,16 +1,17 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc4
-# Thu Feb 17 16:12:23 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 15:38:29 2005
 #
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_PPC=y
 CONFIG_PPC32=y
 CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 
 #
 # Code maturity level options
@@ -18,23 +19,28 @@ CONFIG_GENERIC_NVRAM=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_HOTPLUG is not set
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 # CONFIG_KALLSYMS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -44,6 +50,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -59,34 +66,84 @@ CONFIG_6xx=y
 # CONFIG_POWER3 is not set
 # CONFIG_POWER4 is not set
 # CONFIG_8xx is not set
+# CONFIG_E200 is not set
 # CONFIG_E500 is not set
+CONFIG_PPC_FPU=y
+# CONFIG_KEXEC is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_WANT_EARLY_SERIAL is not set
 CONFIG_PPC_GEN550=y
-CONFIG_83xx=y
-
-#
-# Freescale 83xx options
-#
-CONFIG_MPC834x_SYS=y
-CONFIG_MPC834x=y
 CONFIG_PPC_STD_MMU=y
 
 #
 # Platform options
 #
+# CONFIG_PPC_MULTIPLATFORM is not set
+# CONFIG_APUS is not set
+# CONFIG_KATANA is not set
+# CONFIG_WILLOW is not set
+# CONFIG_CPCI690 is not set
+# CONFIG_POWERPMC250 is not set
+# CONFIG_CHESTNUT is not set
+# CONFIG_SPRUCE is not set
+# CONFIG_HDPU is not set
+# CONFIG_EV64260 is not set
+# CONFIG_LOPEC is not set
+# CONFIG_MVME5100 is not set
+# CONFIG_PPLUS is not set
+# CONFIG_PRPMC750 is not set
+# CONFIG_PRPMC800 is not set
+# CONFIG_SANDPOINT is not set
+# CONFIG_RADSTONE_PPC7D is not set
+# CONFIG_PAL4 is not set
+# CONFIG_GEMINI is not set
+# CONFIG_EST8260 is not set
+# CONFIG_SBC82xx is not set
+# CONFIG_SBS8260 is not set
+# CONFIG_RPX8260 is not set
+# CONFIG_TQM8260 is not set
+# CONFIG_ADS8272 is not set
+# CONFIG_PQ2FADS is not set
+# CONFIG_LITE5200 is not set
+CONFIG_MPC834x_SYS=y
+# CONFIG_EV64360 is not set
+CONFIG_83xx=y
+CONFIG_MPC834x=y
 # CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
 # CONFIG_HIGHMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+# CONFIG_SOFTWARE_SUSPEND is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
 
 #
 # Bus options
 #
 CONFIG_GENERIC_ISA_DMA=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PPC_I8259 is not set
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_MPC83xx_PCI2 is not set
+CONFIG_PCI_LEGACY_PROC=y
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -94,10 +151,6 @@ CONFIG_GENERIC_ISA_DMA=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # Advanced setup
 #
 # CONFIG_ADVANCED_OPTIONS is not set
@@ -112,6 +165,75 @@ CONFIG_TASK_SIZE=0x80000000
 CONFIG_BOOT_LOAD=0x00800000
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
 # Device Drivers
 #
 
@@ -123,6 +245,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -140,15 +267,19 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # Block devices
 #
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 
@@ -159,6 +290,11 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -169,6 +305,7 @@ CONFIG_IOSCHED_CFQ=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 
 #
@@ -179,110 +316,116 @@ CONFIG_IOSCHED_CFQ=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+# CONFIG_IEEE1394 is not set
 
 #
 # I2O device support
 #
+# CONFIG_I2O is not set
 
 #
 # Macintosh device drivers
 #
 
 #
-# Networking support
+# Network device support
 #
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# ARCnet devices
 #
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
+# CONFIG_ARCNET is not set
 
 #
-# QoS and/or fair queueing
+# PHY device support
 #
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
+CONFIG_PHYLIB=y
 
 #
-# Network testing
+# MII PHY device drivers
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+CONFIG_E100=y
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
 
 #
 # Ethernet (1000 Mbit)
 #
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+# CONFIG_E1000_NAPI is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
 # CONFIG_GFAR_NAPI is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
 
 #
 # Token Ring devices
 #
+# CONFIG_TR is not set
 
 #
 # Wireless LAN (non-hamradio)
@@ -293,10 +436,14 @@ CONFIG_GIANFAR=y
 # Wan interfaces
 #
 # CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -323,14 +470,6 @@ CONFIG_INPUT=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -340,6 +479,12 @@ CONFIG_SOUND_GAMEPORT=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 # CONFIG_VT is not set
@@ -358,6 +503,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -376,6 +522,7 @@ CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
 
 #
 # Ftape, the floppy tape device driver
@@ -385,6 +532,12 @@ CONFIG_GEN_RTC=y
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 CONFIG_I2C=y
@@ -400,23 +553,68 @@ CONFIG_I2C_CHARDEV=y
 #
 # I2C Hardware Bus support
 #
-# CONFIG_I2C_ISA is not set
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
 CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
 
 #
-# Hardware Sensors Chip support
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
 #
-# CONFIG_I2C_SENSOR is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
 # CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
 # CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
 # CONFIG_SENSORS_LM75 is not set
@@ -427,33 +625,26 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_LM85 is not set
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
+# Misc devices
 #
-# CONFIG_W1 is not set
 
 #
-# Misc devices
+# Multimedia Capabilities Port drivers
 #
 
 #
@@ -479,11 +670,12 @@ CONFIG_I2C_MPC=y
 #
 # USB support
 #
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
@@ -502,10 +694,15 @@ CONFIG_I2C_MPC=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -515,17 +712,16 @@ CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -546,12 +742,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -580,6 +774,7 @@ CONFIG_NFS_FS=y
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -588,6 +783,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -614,6 +810,7 @@ CONFIG_PARTITION_ADVANCED=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 
@@ -625,7 +822,9 @@ CONFIG_CRC32=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_SERIAL_TEXT_DEBUG is not set
 
 #
diff --git a/arch/ppc/configs/stx_gp3_defconfig b/arch/ppc/configs/stx_gp3_defconfig
index 66dae8367659..3fedc43e44ad 100644
--- a/arch/ppc/configs/stx_gp3_defconfig
+++ b/arch/ppc/configs/stx_gp3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 14:32:58 2005
+# Linux kernel version: 2.6.12-rc4
+# Tue May 24 18:11:04 2005
 #
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -11,6 +11,7 @@ CONFIG_HAVE_DEC_LOCK=y
 CONFIG_PPC=y
 CONFIG_PPC32=y
 CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 
 #
 # Code maturity level options
@@ -18,6 +19,7 @@ CONFIG_GENERIC_NVRAM=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
@@ -29,7 +31,6 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
@@ -37,6 +38,9 @@ CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -46,6 +50,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -69,9 +74,11 @@ CONFIG_KMOD=y
 CONFIG_E500=y
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
+# CONFIG_PHYS_64BIT is not set
 # CONFIG_SPE is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PM is not set
 CONFIG_85xx=y
 CONFIG_PPC_INDIRECT_PCI_BE=y
 
@@ -96,6 +103,7 @@ CONFIG_HIGHMEM=y
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_ISA_DMA_API=y
 
 #
 # Bus options
@@ -104,15 +112,15 @@ CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_PCI_LEGACY_PROC is not set
 # CONFIG_PCI_NAMES is not set
+# CONFIG_PCI_DEBUG is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
 #
 # CONFIG_PCCARD is not set
-
-#
-# PC-card bridges
-#
+CONFIG_RAPIDIO=y
+CONFIG_RAPIDIO_8_BIT_TRANSPORT=y
+CONFIG_RAPIDIO_DISC_TIMEOUT=30
 
 #
 # Advanced setup
@@ -152,7 +160,7 @@ CONFIG_PARPORT=m
 CONFIG_PARPORT_PC=m
 # CONFIG_PARPORT_PC_FIFO is not set
 # CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_OTHER is not set
+# CONFIG_PARPORT_GSC is not set
 # CONFIG_PARPORT_1284 is not set
 
 #
@@ -264,7 +272,6 @@ CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
@@ -274,7 +281,6 @@ CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_IMM is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 CONFIG_SCSI_QLA2XXX=m
@@ -283,6 +289,7 @@ CONFIG_SCSI_QLA2XXX=m
 # CONFIG_SCSI_QLA2300 is not set
 # CONFIG_SCSI_QLA2322 is not set
 # CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
@@ -322,7 +329,6 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -431,7 +437,7 @@ CONFIG_IP_NF_NAT_FTP=m
 #
 # Network testing
 #
-# CONFIG_NET_PKTGEN is not set
+CONFIG_NET_PKTGEN=y
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_HAMRADIO is not set
@@ -499,6 +505,7 @@ CONFIG_GFAR_NAPI=y
 # Wan interfaces
 #
 # CONFIG_WAN is not set
+CONFIG_RIONET=y
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PLIP is not set
@@ -536,20 +543,6 @@ CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-
-#
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
@@ -567,6 +560,19 @@ CONFIG_MOUSE_PS2=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+
+#
 # Character devices
 #
 # CONFIG_VT is not set
@@ -590,6 +596,7 @@ CONFIG_SERIAL_CPM_SCC2=y
 # CONFIG_SERIAL_CPM_SCC4 is not set
 # CONFIG_SERIAL_CPM_SMC1 is not set
 # CONFIG_SERIAL_CPM_SMC2 is not set
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -626,6 +633,11 @@ CONFIG_DRM=m
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 CONFIG_I2C=m
@@ -648,12 +660,12 @@ CONFIG_I2C_ALGOBIT=m
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_ISA is not set
 # CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
 # CONFIG_SCx200_ACB is not set
@@ -677,7 +689,9 @@ CONFIG_I2C_ALGOBIT=m
 # CONFIG_SENSORS_ASB100 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
 # CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
 # CONFIG_SENSORS_LM75 is not set
@@ -688,9 +702,11 @@ CONFIG_I2C_ALGOBIT=m
 # CONFIG_SENSORS_LM85 is not set
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_W83781D is not set
@@ -700,10 +716,12 @@ CONFIG_I2C_ALGOBIT=m
 #
 # Other I2C Chip support
 #
+# CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_M41T00 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -732,7 +750,6 @@ CONFIG_I2C_ALGOBIT=m
 # Graphics support
 #
 # CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -752,13 +769,9 @@ CONFIG_SOUND=m
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
 
 #
 # USB Gadget Support
@@ -789,6 +802,10 @@ CONFIG_JBD_DEBUG=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -859,7 +876,6 @@ CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -942,8 +958,10 @@ CONFIG_ZLIB_INFLATE=m
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_MAGIC_SYSRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile
index 1fb92f16acd6..0bb23fce4293 100644
--- a/arch/ppc/kernel/Makefile
+++ b/arch/ppc/kernel/Makefile
@@ -1,6 +1,7 @@
 #
 # Makefile for the linux kernel.
 #
+ifneq ($(CONFIG_PPC_MERGE),y)
 
 extra-$(CONFIG_PPC_STD_MMU)	:= head.o
 extra-$(CONFIG_40x)		:= head_4xx.o
@@ -9,24 +10,22 @@ extra-$(CONFIG_FSL_BOOKE)	:= head_fsl_booke.o
 extra-$(CONFIG_8xx)		:= head_8xx.o
 extra-$(CONFIG_6xx)		+= idle_6xx.o
 extra-$(CONFIG_POWER4)		+= idle_power4.o
-extra-$(CONFIG_PPC_FPU)		+= fpu.o
 extra-y				+= vmlinux.lds
 
-obj-y				:= entry.o traps.o irq.o idle.o time.o misc.o \
-					process.o signal.o ptrace.o align.o \
-					semaphore.o syscalls.o setup.o \
-					cputable.o ppc_htab.o
+obj-y				:= entry.o traps.o idle.o time.o misc.o \
+					process.o \
+					setup.o \
+					ppc_htab.o
 obj-$(CONFIG_6xx)		+= l2cr.o cpu_setup_6xx.o
-obj-$(CONFIG_E500)		+= perfmon.o
 obj-$(CONFIG_SOFTWARE_SUSPEND)	+= swsusp.o
 obj-$(CONFIG_POWER4)		+= cpu_setup_power4.o
 obj-$(CONFIG_MODULES)		+= module.o ppc_ksyms.o
 obj-$(CONFIG_NOT_COHERENT_CACHE)	+= dma-mapping.o
 obj-$(CONFIG_PCI)		+= pci.o
+obj-$(CONFIG_RAPIDIO)		+= rio.o
 obj-$(CONFIG_KGDB)		+= ppc-stub.o
 obj-$(CONFIG_SMP)		+= smp.o smp-tbsync.o
 obj-$(CONFIG_TAU)		+= temp.o
-obj-$(CONFIG_ALTIVEC)		+= vecemu.o vector.o
 ifndef CONFIG_E200
 obj-$(CONFIG_FSL_BOOKE)		+= perfmon_fsl_booke.o
 endif
@@ -36,3 +35,19 @@ ifndef CONFIG_MATH_EMULATION
 obj-$(CONFIG_8xx)		+= softemu8xx.o
 endif
 
+# These are here while we do the architecture merge
+
+else
+obj-y				:= idle.o
+obj-$(CONFIG_6xx)		+= l2cr.o cpu_setup_6xx.o
+obj-$(CONFIG_SOFTWARE_SUSPEND)	+= swsusp.o
+obj-$(CONFIG_MODULES)		+= module.o
+obj-$(CONFIG_NOT_COHERENT_CACHE)	+= dma-mapping.o
+obj-$(CONFIG_PCI)		+= pci.o
+obj-$(CONFIG_KGDB)		+= ppc-stub.o
+obj-$(CONFIG_TAU)		+= temp.o
+ifndef CONFIG_E200
+obj-$(CONFIG_FSL_BOOKE)		+= perfmon_fsl_booke.o
+endif
+obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
+endif
diff --git a/arch/ppc/kernel/align.c b/arch/ppc/kernel/align.c
deleted file mode 100644
index ff81da9598d8..000000000000
--- a/arch/ppc/kernel/align.c
+++ /dev/null
@@ -1,410 +0,0 @@
-/*
- * align.c - handle alignment exceptions for the Power PC.
- *
- * Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
- * Copyright (c) 1998-1999 TiVo, Inc.
- *   PowerPC 403GCX modifications.
- * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
- *   PowerPC 403GCX/405GP modifications.
- */
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <asm/ptrace.h>
-#include <asm/processor.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/cache.h>
-
-struct aligninfo {
-	unsigned char len;
-	unsigned char flags;
-};
-
-#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE)
-#define	OPCD(inst)	(((inst) & 0xFC000000) >> 26)
-#define	RS(inst)	(((inst) & 0x03E00000) >> 21)
-#define	RA(inst)	(((inst) & 0x001F0000) >> 16)
-#define	IS_XFORM(code)	((code) == 31)
-#endif
-
-#define INVALID	{ 0, 0 }
-
-#define LD	1	/* load */
-#define ST	2	/* store */
-#define	SE	4	/* sign-extend value */
-#define F	8	/* to/from fp regs */
-#define U	0x10	/* update index register */
-#define M	0x20	/* multiple load/store */
-#define S	0x40	/* single-precision fp, or byte-swap value */
-#define SX	0x40	/* byte count in XER */
-#define HARD	0x80	/* string, stwcx. */
-
-#define DCBZ	0x5f	/* 8xx/82xx dcbz faults when cache not enabled */
-
-/*
- * The PowerPC stores certain bits of the instruction that caused the
- * alignment exception in the DSISR register.  This array maps those
- * bits to information about the operand length and what the
- * instruction would do.
- */
-static struct aligninfo aligninfo[128] = {
-	{ 4, LD },		/* 00 0 0000: lwz / lwarx */
-	INVALID,		/* 00 0 0001 */
-	{ 4, ST },		/* 00 0 0010: stw */
-	INVALID,		/* 00 0 0011 */
-	{ 2, LD },		/* 00 0 0100: lhz */
-	{ 2, LD+SE },		/* 00 0 0101: lha */
-	{ 2, ST },		/* 00 0 0110: sth */
-	{ 4, LD+M },		/* 00 0 0111: lmw */
-	{ 4, LD+F+S },		/* 00 0 1000: lfs */
-	{ 8, LD+F },		/* 00 0 1001: lfd */
-	{ 4, ST+F+S },		/* 00 0 1010: stfs */
-	{ 8, ST+F },		/* 00 0 1011: stfd */
-	INVALID,		/* 00 0 1100 */
-	INVALID,		/* 00 0 1101: ld/ldu/lwa */
-	INVALID,		/* 00 0 1110 */
-	INVALID,		/* 00 0 1111: std/stdu */
-	{ 4, LD+U },		/* 00 1 0000: lwzu */
-	INVALID,		/* 00 1 0001 */
-	{ 4, ST+U },		/* 00 1 0010: stwu */
-	INVALID,		/* 00 1 0011 */
-	{ 2, LD+U },		/* 00 1 0100: lhzu */
-	{ 2, LD+SE+U },		/* 00 1 0101: lhau */
-	{ 2, ST+U },		/* 00 1 0110: sthu */
-	{ 4, ST+M },		/* 00 1 0111: stmw */
-	{ 4, LD+F+S+U },	/* 00 1 1000: lfsu */
-	{ 8, LD+F+U },		/* 00 1 1001: lfdu */
-	{ 4, ST+F+S+U },	/* 00 1 1010: stfsu */
-	{ 8, ST+F+U },		/* 00 1 1011: stfdu */
-	INVALID,		/* 00 1 1100 */
-	INVALID,		/* 00 1 1101 */
-	INVALID,		/* 00 1 1110 */
-	INVALID,		/* 00 1 1111 */
-	INVALID,		/* 01 0 0000: ldx */
-	INVALID,		/* 01 0 0001 */
-	INVALID,		/* 01 0 0010: stdx */
-	INVALID,		/* 01 0 0011 */
-	INVALID,		/* 01 0 0100 */
-	INVALID,		/* 01 0 0101: lwax */
-	INVALID,		/* 01 0 0110 */
-	INVALID,		/* 01 0 0111 */
-	{ 4, LD+M+HARD+SX },	/* 01 0 1000: lswx */
-	{ 4, LD+M+HARD },	/* 01 0 1001: lswi */
-	{ 4, ST+M+HARD+SX },	/* 01 0 1010: stswx */
-	{ 4, ST+M+HARD },	/* 01 0 1011: stswi */
-	INVALID,		/* 01 0 1100 */
-	INVALID,		/* 01 0 1101 */
-	INVALID,		/* 01 0 1110 */
-	INVALID,		/* 01 0 1111 */
-	INVALID,		/* 01 1 0000: ldux */
-	INVALID,		/* 01 1 0001 */
-	INVALID,		/* 01 1 0010: stdux */
-	INVALID,		/* 01 1 0011 */
-	INVALID,		/* 01 1 0100 */
-	INVALID,		/* 01 1 0101: lwaux */
-	INVALID,		/* 01 1 0110 */
-	INVALID,		/* 01 1 0111 */
-	INVALID,		/* 01 1 1000 */
-	INVALID,		/* 01 1 1001 */
-	INVALID,		/* 01 1 1010 */
-	INVALID,		/* 01 1 1011 */
-	INVALID,		/* 01 1 1100 */
-	INVALID,		/* 01 1 1101 */
-	INVALID,		/* 01 1 1110 */
-	INVALID,		/* 01 1 1111 */
-	INVALID,		/* 10 0 0000 */
-	INVALID,		/* 10 0 0001 */
-	{ 0, ST+HARD },		/* 10 0 0010: stwcx. */
-	INVALID,		/* 10 0 0011 */
-	INVALID,		/* 10 0 0100 */
-	INVALID,		/* 10 0 0101 */
-	INVALID,		/* 10 0 0110 */
-	INVALID,		/* 10 0 0111 */
-	{ 4, LD+S },		/* 10 0 1000: lwbrx */
-	INVALID,		/* 10 0 1001 */
-	{ 4, ST+S },		/* 10 0 1010: stwbrx */
-	INVALID,		/* 10 0 1011 */
-	{ 2, LD+S },		/* 10 0 1100: lhbrx */
-	INVALID,		/* 10 0 1101 */
-	{ 2, ST+S },		/* 10 0 1110: sthbrx */
-	INVALID,		/* 10 0 1111 */
-	INVALID,		/* 10 1 0000 */
-	INVALID,		/* 10 1 0001 */
-	INVALID,		/* 10 1 0010 */
-	INVALID,		/* 10 1 0011 */
-	INVALID,		/* 10 1 0100 */
-	INVALID,		/* 10 1 0101 */
-	INVALID,		/* 10 1 0110 */
-	INVALID,		/* 10 1 0111 */
-	INVALID,		/* 10 1 1000 */
-	INVALID,		/* 10 1 1001 */
-	INVALID,		/* 10 1 1010 */
-	INVALID,		/* 10 1 1011 */
-	INVALID,		/* 10 1 1100 */
-	INVALID,		/* 10 1 1101 */
-	INVALID,		/* 10 1 1110 */
-	{ 0, ST+HARD },		/* 10 1 1111: dcbz */
-	{ 4, LD },		/* 11 0 0000: lwzx */
-	INVALID,		/* 11 0 0001 */
-	{ 4, ST },		/* 11 0 0010: stwx */
-	INVALID,		/* 11 0 0011 */
-	{ 2, LD },		/* 11 0 0100: lhzx */
-	{ 2, LD+SE },		/* 11 0 0101: lhax */
-	{ 2, ST },		/* 11 0 0110: sthx */
-	INVALID,		/* 11 0 0111 */
-	{ 4, LD+F+S },		/* 11 0 1000: lfsx */
-	{ 8, LD+F },		/* 11 0 1001: lfdx */
-	{ 4, ST+F+S },		/* 11 0 1010: stfsx */
-	{ 8, ST+F },		/* 11 0 1011: stfdx */
-	INVALID,		/* 11 0 1100 */
-	INVALID,		/* 11 0 1101: lmd */
-	INVALID,		/* 11 0 1110 */
-	INVALID,		/* 11 0 1111: stmd */
-	{ 4, LD+U },		/* 11 1 0000: lwzux */
-	INVALID,		/* 11 1 0001 */
-	{ 4, ST+U },		/* 11 1 0010: stwux */
-	INVALID,		/* 11 1 0011 */
-	{ 2, LD+U },		/* 11 1 0100: lhzux */
-	{ 2, LD+SE+U },		/* 11 1 0101: lhaux */
-	{ 2, ST+U },		/* 11 1 0110: sthux */
-	INVALID,		/* 11 1 0111 */
-	{ 4, LD+F+S+U },	/* 11 1 1000: lfsux */
-	{ 8, LD+F+U },		/* 11 1 1001: lfdux */
-	{ 4, ST+F+S+U },	/* 11 1 1010: stfsux */
-	{ 8, ST+F+U },		/* 11 1 1011: stfdux */
-	INVALID,		/* 11 1 1100 */
-	INVALID,		/* 11 1 1101 */
-	INVALID,		/* 11 1 1110 */
-	INVALID,		/* 11 1 1111 */
-};
-
-#define SWAP(a, b)	(t = (a), (a) = (b), (b) = t)
-
-int
-fix_alignment(struct pt_regs *regs)
-{
-	int instr, nb, flags;
-#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE)
-	int opcode, f1, f2, f3;
-#endif
-	int i, t;
-	int reg, areg;
-	int offset, nb0;
-	unsigned char __user *addr;
-	unsigned char *rptr;
-	union {
-		long l;
-		float f;
-		double d;
-		unsigned char v[8];
-	} data;
-
-	CHECK_FULL_REGS(regs);
-
-#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE)
-	/* The 4xx-family & Book-E processors have no DSISR register,
-	 * so we emulate it.
-	 * The POWER4 has a DSISR register but doesn't set it on
-	 * an alignment fault.  -- paulus
-	 */
-
-	if (__get_user(instr, (unsigned int __user *) regs->nip))
-		return 0;
-	opcode = OPCD(instr);
-	reg = RS(instr);
-	areg = RA(instr);
-
-	if (!IS_XFORM(opcode)) {
-		f1 = 0;
-		f2 = (instr & 0x04000000) >> 26;
-		f3 = (instr & 0x78000000) >> 27;
-	} else {
-		f1 = (instr & 0x00000006) >> 1;
-		f2 = (instr & 0x00000040) >> 6;
-		f3 = (instr & 0x00000780) >> 7;
-	}
-
-	instr = ((f1 << 5) | (f2 << 4) | f3);
-#else
-	reg = (regs->dsisr >> 5) & 0x1f;	/* source/dest register */
-	areg = regs->dsisr & 0x1f;		/* register to update */
-	instr = (regs->dsisr >> 10) & 0x7f;
-#endif
-
-	nb = aligninfo[instr].len;
-	if (nb == 0) {
-		long __user *p;
-		int i;
-
-		if (instr != DCBZ)
-			return 0;	/* too hard or invalid instruction */
-		/*
-		 * The dcbz (data cache block zero) instruction
-		 * gives an alignment fault if used on non-cacheable
-		 * memory.  We handle the fault mainly for the
-		 * case when we are running with the cache disabled
-		 * for debugging.
-		 */
-		p = (long __user *) (regs->dar & -L1_CACHE_BYTES);
-		if (user_mode(regs)
-		    && !access_ok(VERIFY_WRITE, p, L1_CACHE_BYTES))
-			return -EFAULT;
-		for (i = 0; i < L1_CACHE_BYTES / sizeof(long); ++i)
-			if (__put_user(0, p+i))
-				return -EFAULT;
-		return 1;
-	}
-
-	flags = aligninfo[instr].flags;
-	if ((flags & (LD|ST)) == 0)
-		return 0;
-
-	/* For the 4xx-family & Book-E processors, the 'dar' field of the
-	 * pt_regs structure is overloaded and is really from the DEAR.
-	 */
-
-	addr = (unsigned char __user *)regs->dar;
-
-	if (flags & M) {
-		/* lmw, stmw, lswi/x, stswi/x */
-		nb0 = 0;
-		if (flags & HARD) {
-			if (flags & SX) {
-				nb = regs->xer & 127;
-				if (nb == 0)
-					return 1;
-			} else {
-				if (__get_user(instr,
-					    (unsigned int __user *)regs->nip))
-					return 0;
-				nb = (instr >> 11) & 0x1f;
-				if (nb == 0)
-					nb = 32;
-			}
-			if (nb + reg * 4 > 128) {
-				nb0 = nb + reg * 4 - 128;
-				nb = 128 - reg * 4;
-			}
-		} else {
-			/* lwm, stmw */
-			nb = (32 - reg) * 4;
-		}
-
-		if (!access_ok((flags & ST? VERIFY_WRITE: VERIFY_READ), addr, nb+nb0))
-			return -EFAULT;	/* bad address */
-
-		rptr = (unsigned char *) &regs->gpr[reg];
-		if (flags & LD) {
-			for (i = 0; i < nb; ++i)
-				if (__get_user(rptr[i], addr+i))
-					return -EFAULT;
-			if (nb0 > 0) {
-				rptr = (unsigned char *) &regs->gpr[0];
-				addr += nb;
-				for (i = 0; i < nb0; ++i)
-					if (__get_user(rptr[i], addr+i))
-						return -EFAULT;
-			}
-			for (; (i & 3) != 0; ++i)
-				rptr[i] = 0;
-		} else {
-			for (i = 0; i < nb; ++i)
-				if (__put_user(rptr[i], addr+i))
-					return -EFAULT;
-			if (nb0 > 0) {
-				rptr = (unsigned char *) &regs->gpr[0];
-				addr += nb;
-				for (i = 0; i < nb0; ++i)
-					if (__put_user(rptr[i], addr+i))
-						return -EFAULT;
-			}
-		}
-		return 1;
-	}
-
-	offset = 0;
-	if (nb < 4) {
-		/* read/write the least significant bits */
-		data.l = 0;
-		offset = 4 - nb;
-	}
-
-	/* Verify the address of the operand */
-	if (user_mode(regs)) {
-		if (!access_ok((flags & ST? VERIFY_WRITE: VERIFY_READ), addr, nb))
-			return -EFAULT;	/* bad address */
-	}
-
-	if (flags & F) {
-		preempt_disable();
-		if (regs->msr & MSR_FP)
-			giveup_fpu(current);
-		preempt_enable();
-	}
-
-	/* If we read the operand, copy it in, else get register values */
-	if (flags & LD) {
-		for (i = 0; i < nb; ++i)
-			if (__get_user(data.v[offset+i], addr+i))
-				return -EFAULT;
-	} else if (flags & F) {
-		data.d = current->thread.fpr[reg];
-	} else {
-		data.l = regs->gpr[reg];
-	}
-
-	switch (flags & ~U) {
-	case LD+SE:	/* sign extend */
-		if (data.v[2] >= 0x80)
-			data.v[0] = data.v[1] = -1;
-		break;
-
-	case LD+S:	/* byte-swap */
-	case ST+S:
-		if (nb == 2) {
-			SWAP(data.v[2], data.v[3]);
-		} else {
-			SWAP(data.v[0], data.v[3]);
-			SWAP(data.v[1], data.v[2]);
-		}
-		break;
-
-	/* Single-precision FP load and store require conversions... */
-	case LD+F+S:
-#ifdef CONFIG_PPC_FPU
-		preempt_disable();
-		enable_kernel_fp();
-		cvt_fd(&data.f, &data.d, &current->thread.fpscr);
-		preempt_enable();
-#else
-		return 0;
-#endif
-		break;
-	case ST+F+S:
-#ifdef CONFIG_PPC_FPU
-		preempt_disable();
-		enable_kernel_fp();
-		cvt_df(&data.d, &data.f, &current->thread.fpscr);
-		preempt_enable();
-#else
-		return 0;
-#endif
-		break;
-	}
-
-	if (flags & ST) {
-		for (i = 0; i < nb; ++i)
-			if (__put_user(data.v[offset+i], addr+i))
-				return -EFAULT;
-	} else if (flags & F) {
-		current->thread.fpr[reg] = data.d;
-	} else {
-		regs->gpr[reg] = data.l;
-	}
-
-	if (flags & U)
-		regs->gpr[areg] = regs->dar;
-
-	return 1;
-}
diff --git a/arch/ppc/kernel/asm-offsets.c b/arch/ppc/kernel/asm-offsets.c
index d9ad1d776d0e..fe0e767fb94e 100644
--- a/arch/ppc/kernel/asm-offsets.c
+++ b/arch/ppc/kernel/asm-offsets.c
@@ -25,6 +25,7 @@
 #include <asm/processor.h>
 #include <asm/cputable.h>
 #include <asm/thread_info.h>
+#include <asm/vdso_datapage.h>
 
 #define DEFINE(sym, val) \
 	asm volatile("\n->" #sym " %0 " #val : : "i" (val))
@@ -130,10 +131,10 @@ main(void)
 	DEFINE(CPU_SPEC_FEATURES, offsetof(struct cpu_spec, cpu_features));
 	DEFINE(CPU_SPEC_SETUP, offsetof(struct cpu_spec, cpu_setup));
 
+	DEFINE(TI_SC_NOERR, offsetof(struct thread_info, syscall_noerror));
 	DEFINE(TI_TASK, offsetof(struct thread_info, task));
 	DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain));
 	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
-	DEFINE(TI_LOCAL_FLAGS, offsetof(struct thread_info, local_flags));
 	DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
 	DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count));
 
@@ -141,6 +142,34 @@ main(void)
 	DEFINE(pbe_orig_address, offsetof(struct pbe, orig_address));
 	DEFINE(pbe_next, offsetof(struct pbe, next));
 
+	DEFINE(TASK_SIZE, TASK_SIZE);
 	DEFINE(NUM_USER_SEGMENTS, TASK_SIZE>>28);
+
+	/* datapage offsets for use by vdso */
+	DEFINE(CFG_TB_ORIG_STAMP, offsetof(struct vdso_data, tb_orig_stamp));
+	DEFINE(CFG_TB_TICKS_PER_SEC, offsetof(struct vdso_data, tb_ticks_per_sec));
+	DEFINE(CFG_TB_TO_XS, offsetof(struct vdso_data, tb_to_xs));
+	DEFINE(CFG_STAMP_XSEC, offsetof(struct vdso_data, stamp_xsec));
+	DEFINE(CFG_TB_UPDATE_COUNT, offsetof(struct vdso_data, tb_update_count));
+	DEFINE(CFG_TZ_MINUTEWEST, offsetof(struct vdso_data, tz_minuteswest));
+	DEFINE(CFG_TZ_DSTTIME, offsetof(struct vdso_data, tz_dsttime));
+	DEFINE(CFG_SYSCALL_MAP32, offsetof(struct vdso_data, syscall_map_32));
+	DEFINE(WTOM_CLOCK_SEC, offsetof(struct vdso_data, wtom_clock_sec));
+	DEFINE(WTOM_CLOCK_NSEC, offsetof(struct vdso_data, wtom_clock_nsec));
+	DEFINE(TVAL32_TV_SEC, offsetof(struct timeval, tv_sec));
+	DEFINE(TVAL32_TV_USEC, offsetof(struct timeval, tv_usec));
+	DEFINE(TSPEC32_TV_SEC, offsetof(struct timespec, tv_sec));
+	DEFINE(TSPEC32_TV_NSEC, offsetof(struct timespec, tv_nsec));
+
+	/* timeval/timezone offsets for use by vdso */
+	DEFINE(TZONE_TZ_MINWEST, offsetof(struct timezone, tz_minuteswest));
+	DEFINE(TZONE_TZ_DSTTIME, offsetof(struct timezone, tz_dsttime));
+
+	/* Other bits used by the vdso */
+	DEFINE(CLOCK_REALTIME, CLOCK_REALTIME);
+	DEFINE(CLOCK_MONOTONIC, CLOCK_MONOTONIC);
+	DEFINE(NSEC_PER_SEC, NSEC_PER_SEC);
+	DEFINE(CLOCK_REALTIME_RES, TICK_NSEC);
+
 	return 0;
 }
diff --git a/arch/ppc/kernel/bitops.c b/arch/ppc/kernel/bitops.c
deleted file mode 100644
index 7f53d193968b..000000000000
--- a/arch/ppc/kernel/bitops.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * Copyright (C) 1996 Paul Mackerras.
- */
-
-#include <linux/kernel.h>
-#include <linux/bitops.h>
-
-/*
- * If the bitops are not inlined in bitops.h, they are defined here.
- *  -- paulus
- */
-#if !__INLINE_BITOPS
-void set_bit(int nr, volatile void * addr)
-{
-	unsigned long old;
-	unsigned long mask = 1 << (nr & 0x1f);
-	unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
-	
-	__asm__ __volatile__(SMP_WMB "\n\
-1:	lwarx	%0,0,%3 \n\
-	or	%0,%0,%2 \n"
-	PPC405_ERR77(0,%3)
-"	stwcx.	%0,0,%3 \n\
-	bne	1b"
-	SMP_MB
-	: "=&r" (old), "=m" (*p)
-	: "r" (mask), "r" (p), "m" (*p)
-	: "cc" );
-}
-
-void clear_bit(int nr, volatile void *addr)
-{
-	unsigned long old;
-	unsigned long mask = 1 << (nr & 0x1f);
-	unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
-
-	__asm__ __volatile__(SMP_WMB "\n\
-1:	lwarx	%0,0,%3 \n\
-	andc	%0,%0,%2 \n"
-	PPC405_ERR77(0,%3)
-"	stwcx.	%0,0,%3 \n\
-	bne	1b"
-	SMP_MB
-	: "=&r" (old), "=m" (*p)
-	: "r" (mask), "r" (p), "m" (*p)
-	: "cc");
-}
-
-void change_bit(int nr, volatile void *addr)
-{
-	unsigned long old;
-	unsigned long mask = 1 << (nr & 0x1f);
-	unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
-
-	__asm__ __volatile__(SMP_WMB "\n\
-1:	lwarx	%0,0,%3 \n\
-	xor	%0,%0,%2 \n"
-	PPC405_ERR77(0,%3)
-"	stwcx.	%0,0,%3 \n\
-	bne	1b"
-	SMP_MB
-	: "=&r" (old), "=m" (*p)
-	: "r" (mask), "r" (p), "m" (*p)
-	: "cc");
-}
-
-int test_and_set_bit(int nr, volatile void *addr)
-{
-	unsigned int old, t;
-	unsigned int mask = 1 << (nr & 0x1f);
-	volatile unsigned int *p = ((volatile unsigned int *)addr) + (nr >> 5);
-
-	__asm__ __volatile__(SMP_WMB "\n\
-1:	lwarx	%0,0,%4 \n\
-	or	%1,%0,%3 \n"
-	PPC405_ERR77(0,%4)
-"	stwcx.	%1,0,%4 \n\
-	bne	1b"
-	SMP_MB
-	: "=&r" (old), "=&r" (t), "=m" (*p)
-	: "r" (mask), "r" (p), "m" (*p)
-	: "cc");
-
-	return (old & mask) != 0;
-}
-
-int test_and_clear_bit(int nr, volatile void *addr)
-{
-	unsigned int old, t;
-	unsigned int mask = 1 << (nr & 0x1f);
-	volatile unsigned int *p = ((volatile unsigned int *)addr) + (nr >> 5);
-
-	__asm__ __volatile__(SMP_WMB "\n\
-1:	lwarx	%0,0,%4 \n\
-	andc	%1,%0,%3 \n"
-	PPC405_ERR77(0,%4)
-"	stwcx.	%1,0,%4 \n\
-	bne	1b"
-	SMP_MB
-	: "=&r" (old), "=&r" (t), "=m" (*p)
-	: "r" (mask), "r" (p), "m" (*p)
-	: "cc");
-
-	return (old & mask) != 0;
-}
-
-int test_and_change_bit(int nr, volatile void *addr)
-{
-	unsigned int old, t;
-	unsigned int mask = 1 << (nr & 0x1f);
-	volatile unsigned int *p = ((volatile unsigned int *)addr) + (nr >> 5);
-
-	__asm__ __volatile__(SMP_WMB "\n\
-1:	lwarx	%0,0,%4 \n\
-	xor	%1,%0,%3 \n"
-	PPC405_ERR77(0,%4)
-"	stwcx.	%1,0,%4 \n\
-	bne	1b"
-	SMP_MB
-	: "=&r" (old), "=&r" (t), "=m" (*p)
-	: "r" (mask), "r" (p), "m" (*p)
-	: "cc");
-
-	return (old & mask) != 0;
-}
-#endif /* !__INLINE_BITOPS */
diff --git a/arch/ppc/kernel/cpu_setup_6xx.S b/arch/ppc/kernel/cpu_setup_6xx.S
index ba396438ede3..55ed7716636f 100644
--- a/arch/ppc/kernel/cpu_setup_6xx.S
+++ b/arch/ppc/kernel/cpu_setup_6xx.S
@@ -17,8 +17,6 @@
 #include <asm/asm-offsets.h>
 #include <asm/cache.h>
 
-_GLOBAL(__setup_cpu_601)
-	blr
 _GLOBAL(__setup_cpu_603)
 	b	setup_common_caches
 _GLOBAL(__setup_cpu_604)
@@ -292,10 +290,10 @@ _GLOBAL(__init_fpu_registers)
 #define CS_SIZE		32
 
 	.data
-	.balign	L1_CACHE_LINE_SIZE
+	.balign	L1_CACHE_BYTES
 cpu_state_storage:
 	.space	CS_SIZE
-	.balign	L1_CACHE_LINE_SIZE,0
+	.balign	L1_CACHE_BYTES,0
 	.text
 
 /* Called in normal context to backup CPU 0 state. This
diff --git a/arch/ppc/kernel/cpu_setup_power4.S b/arch/ppc/kernel/cpu_setup_power4.S
index 7e4fbb653724..d7bfd60e21fc 100644
--- a/arch/ppc/kernel/cpu_setup_power4.S
+++ b/arch/ppc/kernel/cpu_setup_power4.S
@@ -63,8 +63,6 @@ _GLOBAL(__970_cpu_preinit)
 	isync
 	blr
 
-_GLOBAL(__setup_cpu_power4)
-	blr
 _GLOBAL(__setup_cpu_ppc970)
 	mfspr	r0,SPRN_HID0
 	li	r11,5			/* clear DOZE and SLEEP */
@@ -88,10 +86,10 @@ _GLOBAL(__setup_cpu_ppc970)
 #define CS_SIZE		32
 
 	.data
-	.balign	L1_CACHE_LINE_SIZE
+	.balign	L1_CACHE_BYTES
 cpu_state_storage:	
 	.space	CS_SIZE
-	.balign	L1_CACHE_LINE_SIZE,0
+	.balign	L1_CACHE_BYTES,0
 	.text
 	
 /* Called in normal context to backup CPU 0 state. This
diff --git a/arch/ppc/kernel/dma-mapping.c b/arch/ppc/kernel/dma-mapping.c
index b566d982806c..685fd0defe23 100644
--- a/arch/ppc/kernel/dma-mapping.c
+++ b/arch/ppc/kernel/dma-mapping.c
@@ -115,7 +115,7 @@ static struct vm_region consistent_head = {
 };
 
 static struct vm_region *
-vm_region_alloc(struct vm_region *head, size_t size, int gfp)
+vm_region_alloc(struct vm_region *head, size_t size, gfp_t gfp)
 {
 	unsigned long addr = head->vm_start, end = head->vm_end - size;
 	unsigned long flags;
@@ -173,7 +173,7 @@ static struct vm_region *vm_region_find(struct vm_region *head, unsigned long ad
  * virtual and bus address for that space.
  */
 void *
-__dma_alloc_coherent(size_t size, dma_addr_t *handle, int gfp)
+__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp)
 {
 	struct page *page;
 	struct vm_region *c;
@@ -335,8 +335,6 @@ static int __init dma_alloc_init(void)
 	pte_t *pte;
 	int ret = 0;
 
-	spin_lock(&init_mm.page_table_lock);
-
 	do {
 		pgd = pgd_offset(&init_mm, CONSISTENT_BASE);
 		pmd = pmd_alloc(&init_mm, pgd, CONSISTENT_BASE);
@@ -347,7 +345,7 @@ static int __init dma_alloc_init(void)
 		}
 		WARN_ON(!pmd_none(*pmd));
 
-		pte = pte_alloc_kernel(&init_mm, pmd, CONSISTENT_BASE);
+		pte = pte_alloc_kernel(pmd, CONSISTENT_BASE);
 		if (!pte) {
 			printk(KERN_ERR "%s: no pte tables\n", __func__);
 			ret = -ENOMEM;
@@ -357,8 +355,6 @@ static int __init dma_alloc_init(void)
 		consistent_pte = pte;
 	} while (0);
 
-	spin_unlock(&init_mm.page_table_lock);
-
 	return ret;
 }
 
@@ -401,10 +397,10 @@ EXPORT_SYMBOL(__dma_sync);
 static inline void __dma_sync_page_highmem(struct page *page,
 		unsigned long offset, size_t size, int direction)
 {
-	size_t seg_size = min((size_t)PAGE_SIZE, size) - offset;
+	size_t seg_size = min((size_t)(PAGE_SIZE - offset), size);
 	size_t cur_size = seg_size;
 	unsigned long flags, start, seg_offset = offset;
-	int nr_segs = PAGE_ALIGN(size + (PAGE_SIZE - offset))/PAGE_SIZE;
+	int nr_segs = 1 + ((size - seg_size) + PAGE_SIZE - 1)/PAGE_SIZE;
 	int seg_nr = 0;
 
 	local_irq_save(flags);
diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S
index 03d4886869f3..f044edbb454f 100644
--- a/arch/ppc/kernel/entry.S
+++ b/arch/ppc/kernel/entry.S
@@ -200,9 +200,8 @@ _GLOBAL(DoSyscall)
 	bl	do_show_syscall
 #endif /* SHOW_SYSCALLS */
 	rlwinm	r10,r1,0,0,18	/* current_thread_info() */
-	lwz	r11,TI_LOCAL_FLAGS(r10)
-	rlwinm	r11,r11,0,~_TIFL_FORCE_NOERROR
-	stw	r11,TI_LOCAL_FLAGS(r10)
+	li	r11,0
+	stb	r11,TI_SC_NOERR(r10)
 	lwz	r11,TI_FLAGS(r10)
 	andi.	r11,r11,_TIF_SYSCALL_T_OR_A
 	bne-	syscall_dotrace
@@ -227,8 +226,8 @@ ret_from_syscall:
 	cmplw	0,r3,r11
 	rlwinm	r12,r1,0,0,18	/* current_thread_info() */
 	blt+	30f
-	lwz	r11,TI_LOCAL_FLAGS(r12)
-	andi.	r11,r11,_TIFL_FORCE_NOERROR
+	lbz	r11,TI_SC_NOERR(r12)
+	cmpwi	r11,0
 	bne	30f
 	neg	r3,r3
 	lwz	r10,_CCR(r1)	/* Set SO bit in CR */
@@ -633,7 +632,8 @@ sigreturn_exit:
 	rlwinm	r12,r1,0,0,18	/* current_thread_info() */
 	lwz	r9,TI_FLAGS(r12)
 	andi.	r0,r9,_TIF_SYSCALL_T_OR_A
-	bnel-	do_syscall_trace_leave
+	beq+	ret_from_except_full
+	bl	do_syscall_trace_leave
 	/* fall through */
 
 	.globl	ret_from_except_full
diff --git a/arch/ppc/kernel/head.S b/arch/ppc/kernel/head.S
index 1960fb8c259c..c5a890dca9cf 100644
--- a/arch/ppc/kernel/head.S
+++ b/arch/ppc/kernel/head.S
@@ -349,12 +349,12 @@ i##n:								\
 
 /* System reset */
 /* core99 pmac starts the seconary here by changing the vector, and
-   putting it back to what it was (UnknownException) when done.  */
+   putting it back to what it was (unknown_exception) when done.  */
 #if defined(CONFIG_GEMINI) && defined(CONFIG_SMP)
 	. = 0x100
 	b	__secondary_start_gemini
 #else
-	EXCEPTION(0x100, Reset, UnknownException, EXC_XFER_STD)
+	EXCEPTION(0x100, Reset, unknown_exception, EXC_XFER_STD)
 #endif
 
 /* Machine check */
@@ -389,7 +389,7 @@ i##n:								\
 	cmpwi	cr1,r4,0
 	bne	cr1,1f
 #endif
-	EXC_XFER_STD(0x200, MachineCheckException)
+	EXC_XFER_STD(0x200, machine_check_exception)
 #ifdef CONFIG_PPC_CHRP
 1:	b	machine_check_in_rtas
 #endif
@@ -456,10 +456,10 @@ Alignment:
 	mfspr	r5,SPRN_DSISR
 	stw	r5,_DSISR(r11)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE(0x600, AlignmentException)
+	EXC_XFER_EE(0x600, alignment_exception)
 
 /* Program check exception */
-	EXCEPTION(0x700, ProgramCheck, ProgramCheckException, EXC_XFER_STD)
+	EXCEPTION(0x700, ProgramCheck, program_check_exception, EXC_XFER_STD)
 
 /* Floating-point unavailable */
 	. = 0x800
@@ -467,13 +467,13 @@ FPUnavailable:
 	EXCEPTION_PROLOG
 	bne	load_up_fpu		/* if from user, just load it up */
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE_LITE(0x800, KernelFP)
+	EXC_XFER_EE_LITE(0x800, kernel_fp_unavailable_exception)
 
 /* Decrementer */
 	EXCEPTION(0x900, Decrementer, timer_interrupt, EXC_XFER_LITE)
 
-	EXCEPTION(0xa00, Trap_0a, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0xb00, Trap_0b, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0xa00, Trap_0a, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0xb00, Trap_0b, unknown_exception, EXC_XFER_EE)
 
 /* System call */
 	. = 0xc00
@@ -482,8 +482,8 @@ SystemCall:
 	EXC_XFER_EE_LITE(0xc00, DoSyscall)
 
 /* Single step - not used on 601 */
-	EXCEPTION(0xd00, SingleStep, SingleStepException, EXC_XFER_STD)
-	EXCEPTION(0xe00, Trap_0e, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0xd00, SingleStep, single_step_exception, EXC_XFER_STD)
+	EXCEPTION(0xe00, Trap_0e, unknown_exception, EXC_XFER_EE)
 
 /*
  * The Altivec unavailable trap is at 0x0f20.  Foo.
@@ -502,7 +502,7 @@ SystemCall:
 Trap_0f:
 	EXCEPTION_PROLOG
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE(0xf00, UnknownException)
+	EXC_XFER_EE(0xf00, unknown_exception)
 
 /*
  * Handle TLB miss for instruction on 603/603e.
@@ -702,44 +702,44 @@ DataStoreTLBMiss:
 	rfi
 
 #ifndef CONFIG_ALTIVEC
-#define AltivecAssistException	UnknownException
+#define altivec_assist_exception	unknown_exception
 #endif
 
-	EXCEPTION(0x1300, Trap_13, InstructionBreakpoint, EXC_XFER_EE)
+	EXCEPTION(0x1300, Trap_13, instruction_breakpoint_exception, EXC_XFER_EE)
 	EXCEPTION(0x1400, SMI, SMIException, EXC_XFER_EE)
-	EXCEPTION(0x1500, Trap_15, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE)
 #ifdef CONFIG_POWER4
-	EXCEPTION(0x1600, Trap_16, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x1700, Trap_17, AltivecAssistException, EXC_XFER_EE)
+	EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1700, Trap_17, altivec_assist_exception, EXC_XFER_EE)
 	EXCEPTION(0x1800, Trap_18, TAUException, EXC_XFER_STD)
 #else /* !CONFIG_POWER4 */
-	EXCEPTION(0x1600, Trap_16, AltivecAssistException, EXC_XFER_EE)
+	EXCEPTION(0x1600, Trap_16, altivec_assist_exception, EXC_XFER_EE)
 	EXCEPTION(0x1700, Trap_17, TAUException, EXC_XFER_STD)
-	EXCEPTION(0x1800, Trap_18, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE)
 #endif /* CONFIG_POWER4 */
-	EXCEPTION(0x1900, Trap_19, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x1a00, Trap_1a, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x1b00, Trap_1b, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x1c00, Trap_1c, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x1d00, Trap_1d, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x1e00, Trap_1e, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x1f00, Trap_1f, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1a00, Trap_1a, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1b00, Trap_1b, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1c00, Trap_1c, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1d00, Trap_1d, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1e00, Trap_1e, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1f00, Trap_1f, unknown_exception, EXC_XFER_EE)
 	EXCEPTION(0x2000, RunMode, RunModeException, EXC_XFER_EE)
-	EXCEPTION(0x2100, Trap_21, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x2200, Trap_22, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x2300, Trap_23, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x2400, Trap_24, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x2500, Trap_25, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x2600, Trap_26, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x2700, Trap_27, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x2800, Trap_28, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x2900, Trap_29, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x2a00, Trap_2a, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x2b00, Trap_2b, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x2c00, Trap_2c, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x2d00, Trap_2d, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x2e00, Trap_2e, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x2f00, MOLTrampoline, UnknownException, EXC_XFER_EE_LITE)
+	EXCEPTION(0x2100, Trap_21, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x2200, Trap_22, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x2300, Trap_23, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x2400, Trap_24, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x2500, Trap_25, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x2600, Trap_26, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x2700, Trap_27, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x2800, Trap_28, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x2900, Trap_29, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x2a00, Trap_2a, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x2b00, Trap_2b, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x2c00, Trap_2c, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x2d00, Trap_2d, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x2e00, Trap_2e, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x2f00, MOLTrampoline, unknown_exception, EXC_XFER_EE_LITE)
 
 	.globl mol_trampoline
 	.set mol_trampoline, i0x2f00
@@ -751,7 +751,7 @@ AltiVecUnavailable:
 #ifdef CONFIG_ALTIVEC
 	bne	load_up_altivec		/* if from user, just load it up */
 #endif /* CONFIG_ALTIVEC */
-	EXC_XFER_EE_LITE(0xf20, AltivecUnavailException)
+	EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception)
 
 #ifdef CONFIG_PPC64BRIDGE
 DataAccess:
@@ -767,12 +767,12 @@ DataSegment:
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	mfspr	r4,SPRN_DAR
 	stw	r4,_DAR(r11)
-	EXC_XFER_STD(0x380, UnknownException)
+	EXC_XFER_STD(0x380, unknown_exception)
 
 InstructionSegment:
 	EXCEPTION_PROLOG
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_STD(0x480, UnknownException)
+	EXC_XFER_STD(0x480, unknown_exception)
 #endif /* CONFIG_PPC64BRIDGE */
 
 #ifdef CONFIG_ALTIVEC
@@ -804,7 +804,7 @@ load_up_altivec:
 	beq	1f
 	add	r4,r4,r6
 	addi	r4,r4,THREAD	/* want THREAD of last_task_used_altivec */
-	SAVE_32VR(0,r10,r4)
+	SAVE_32VRS(0,r10,r4)
 	mfvscr	vr0
 	li	r10,THREAD_VSCR
 	stvx	vr0,r10,r4
@@ -824,7 +824,7 @@ load_up_altivec:
 	stw	r4,THREAD_USED_VR(r5)
 	lvx	vr0,r10,r5
 	mtvscr	vr0
-	REST_32VR(0,r10,r5)
+	REST_32VRS(0,r10,r5)
 #ifndef CONFIG_SMP
 	subi	r4,r5,THREAD
 	sub	r4,r4,r6
@@ -870,7 +870,7 @@ giveup_altivec:
 	addi	r3,r3,THREAD		/* want THREAD of task */
 	lwz	r5,PT_REGS(r3)
 	cmpwi	0,r5,0
-	SAVE_32VR(0, r4, r3)
+	SAVE_32VRS(0, r4, r3)
 	mfvscr	vr0
 	li	r4,THREAD_VSCR
 	stvx	vr0,r4,r3
@@ -916,7 +916,7 @@ relocate_kernel:
 copy_and_flush:
 	addi	r5,r5,-4
 	addi	r6,r6,-4
-4:	li	r0,L1_CACHE_LINE_SIZE/4
+4:	li	r0,L1_CACHE_BYTES/4
 	mtctr	r0
 3:	addi	r6,r6,4			/* copy a cache line */
 	lwzx	r0,r6,r4
@@ -1059,7 +1059,6 @@ __secondary_start:
 
 	lis	r3,-KERNELBASE@h
 	mr	r4,r24
-	bl	identify_cpu
 	bl	call_setup_cpu		/* Call setup_cpu for this CPU */
 #ifdef CONFIG_6xx
 	lis	r3,-KERNELBASE@h
@@ -1109,11 +1108,6 @@ __secondary_start:
  * Those generic dummy functions are kept for CPUs not
  * included in CONFIG_6xx
  */
-_GLOBAL(__setup_cpu_power3)
-	blr
-_GLOBAL(__setup_cpu_generic)
-	blr
-
 #if !defined(CONFIG_6xx) && !defined(CONFIG_POWER4)
 _GLOBAL(__save_cpu_setup)
 	blr
diff --git a/arch/ppc/kernel/head_44x.S b/arch/ppc/kernel/head_44x.S
index 599245b0407e..677c571aa276 100644
--- a/arch/ppc/kernel/head_44x.S
+++ b/arch/ppc/kernel/head_44x.S
@@ -190,8 +190,8 @@ skpinv:	addi	r4,r4,1				/* Increment */
 
 	/* xlat fields */
 	lis	r4,UART0_PHYS_IO_BASE@h		/* RPN depends on SoC */
-#ifndef CONFIG_440EP
-	ori	r4,r4,0x0001		/* ERPN is 1 for second 4GB page */
+#ifdef UART0_PHYS_ERPN
+	ori	r4,r4,UART0_PHYS_ERPN		/* Add ERPN if above 4GB */
 #endif
 
 	/* attrib fields */
@@ -309,13 +309,13 @@ skpinv:	addi	r4,r4,1				/* Increment */
 
 interrupt_base:
 	/* Critical Input Interrupt */
-	CRITICAL_EXCEPTION(0x0100, CriticalInput, UnknownException)
+	CRITICAL_EXCEPTION(0x0100, CriticalInput, unknown_exception)
 
 	/* Machine Check Interrupt */
 #ifdef CONFIG_440A
-	MCHECK_EXCEPTION(0x0200, MachineCheck, MachineCheckException)
+	MCHECK_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
 #else
-	CRITICAL_EXCEPTION(0x0200, MachineCheck, MachineCheckException)
+	CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
 #endif
 
 	/* Data Storage Interrupt */
@@ -442,7 +442,7 @@ interrupt_base:
 #ifdef CONFIG_PPC_FPU
 	FP_UNAVAILABLE_EXCEPTION
 #else
-	EXCEPTION(0x2010, FloatingPointUnavailable, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x2010, FloatingPointUnavailable, unknown_exception, EXC_XFER_EE)
 #endif
 
 	/* System Call Interrupt */
@@ -451,21 +451,21 @@ interrupt_base:
 	EXC_XFER_EE_LITE(0x0c00, DoSyscall)
 
 	/* Auxillary Processor Unavailable Interrupt */
-	EXCEPTION(0x2020, AuxillaryProcessorUnavailable, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x2020, AuxillaryProcessorUnavailable, unknown_exception, EXC_XFER_EE)
 
 	/* Decrementer Interrupt */
 	DECREMENTER_EXCEPTION
 
 	/* Fixed Internal Timer Interrupt */
 	/* TODO: Add FIT support */
-	EXCEPTION(0x1010, FixedIntervalTimer, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x1010, FixedIntervalTimer, unknown_exception, EXC_XFER_EE)
 
 	/* Watchdog Timer Interrupt */
 	/* TODO: Add watchdog support */
 #ifdef CONFIG_BOOKE_WDT
 	CRITICAL_EXCEPTION(0x1020, WatchdogTimer, WatchdogException)
 #else
-	CRITICAL_EXCEPTION(0x1020, WatchdogTimer, UnknownException)
+	CRITICAL_EXCEPTION(0x1020, WatchdogTimer, unknown_exception)
 #endif
 
 	/* Data TLB Error Interrupt */
@@ -743,14 +743,18 @@ _GLOBAL(set_context)
  * goes at the beginning of the data segment, which is page-aligned.
  */
 	.data
-_GLOBAL(sdata)
-_GLOBAL(empty_zero_page)
+	.align	12
+	.globl	sdata
+sdata:
+	.globl	empty_zero_page
+empty_zero_page:
 	.space	4096
 
 /*
  * To support >32-bit physical addresses, we use an 8KB pgdir.
  */
-_GLOBAL(swapper_pg_dir)
+	.globl	swapper_pg_dir
+swapper_pg_dir:
 	.space	8192
 
 /* Reserved 4k for the critical exception stack & 4k for the machine
@@ -759,13 +763,15 @@ _GLOBAL(swapper_pg_dir)
         .align 12
 exception_stack_bottom:
 	.space	BOOKE_EXCEPTION_STACK_SIZE
-_GLOBAL(exception_stack_top)
+	.globl	exception_stack_top
+exception_stack_top:
 
 /*
  * This space gets a copy of optional info passed to us by the bootstrap
  * which is used to pass parameters into the kernel like root=/dev/sda1, etc.
  */
-_GLOBAL(cmd_line)
+	.globl	cmd_line
+cmd_line:
 	.space	512
 
 /*
@@ -774,5 +780,3 @@ _GLOBAL(cmd_line)
  */
 abatron_pteptrs:
 	.space	8
-
-
diff --git a/arch/ppc/kernel/head_4xx.S b/arch/ppc/kernel/head_4xx.S
index 8562b807b37c..10c261c67021 100644
--- a/arch/ppc/kernel/head_4xx.S
+++ b/arch/ppc/kernel/head_4xx.S
@@ -245,12 +245,12 @@ label:
 /*
  * 0x0100 - Critical Interrupt Exception
  */
-	CRITICAL_EXCEPTION(0x0100, CriticalInterrupt, UnknownException)
+	CRITICAL_EXCEPTION(0x0100, CriticalInterrupt, unknown_exception)
 
 /*
  * 0x0200 - Machine Check Exception
  */
-	CRITICAL_EXCEPTION(0x0200, MachineCheck, MachineCheckException)
+	CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
 
 /*
  * 0x0300 - Data Storage Exception
@@ -405,7 +405,7 @@ label:
 	mfspr	r4,SPRN_DEAR		/* Grab the DEAR and save it */
 	stw	r4,_DEAR(r11)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE(0x600, AlignmentException)
+	EXC_XFER_EE(0x600, alignment_exception)
 
 /* 0x0700 - Program Exception */
 	START_EXCEPTION(0x0700, ProgramCheck)
@@ -413,21 +413,21 @@ label:
 	mfspr	r4,SPRN_ESR		/* Grab the ESR and save it */
 	stw	r4,_ESR(r11)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_STD(0x700, ProgramCheckException)
+	EXC_XFER_STD(0x700, program_check_exception)
 
-	EXCEPTION(0x0800, Trap_08, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x0900, Trap_09, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x0A00, Trap_0A, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x0B00, Trap_0B, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x0800, Trap_08, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x0900, Trap_09, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x0A00, Trap_0A, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x0B00, Trap_0B, unknown_exception, EXC_XFER_EE)
 
 /* 0x0C00 - System Call Exception */
 	START_EXCEPTION(0x0C00,	SystemCall)
 	NORMAL_EXCEPTION_PROLOG
 	EXC_XFER_EE_LITE(0xc00, DoSyscall)
 
-	EXCEPTION(0x0D00, Trap_0D, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x0E00, Trap_0E, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x0F00, Trap_0F, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x0D00, Trap_0D, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x0E00, Trap_0E, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x0F00, Trap_0F, unknown_exception, EXC_XFER_EE)
 
 /* 0x1000 - Programmable Interval Timer (PIT) Exception */
 	START_EXCEPTION(0x1000, Decrementer)
@@ -444,14 +444,14 @@ label:
 
 /* 0x1010 - Fixed Interval Timer (FIT) Exception
 */
-	STND_EXCEPTION(0x1010,	FITException,		UnknownException)
+	STND_EXCEPTION(0x1010,	FITException,		unknown_exception)
 
 /* 0x1020 - Watchdog Timer (WDT) Exception
 */
 #ifdef CONFIG_BOOKE_WDT
 	CRITICAL_EXCEPTION(0x1020, WDTException, WatchdogException)
 #else
-	CRITICAL_EXCEPTION(0x1020, WDTException, UnknownException)
+	CRITICAL_EXCEPTION(0x1020, WDTException, unknown_exception)
 #endif
 #endif
 
@@ -656,25 +656,25 @@ label:
 	mfspr	r10, SPRN_SPRG0
 	b	InstructionAccess
 
-	EXCEPTION(0x1300, Trap_13, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x1400, Trap_14, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x1500, Trap_15, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x1600, Trap_16, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x1300, Trap_13, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1400, Trap_14, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_EE)
 #ifdef CONFIG_IBM405_ERR51
 	/* 405GP errata 51 */
 	START_EXCEPTION(0x1700, Trap_17)
 	b DTLBMiss
 #else
-	EXCEPTION(0x1700, Trap_17, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x1700, Trap_17, unknown_exception, EXC_XFER_EE)
 #endif
-	EXCEPTION(0x1800, Trap_18, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x1900, Trap_19, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x1A00, Trap_1A, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x1B00, Trap_1B, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x1C00, Trap_1C, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x1D00, Trap_1D, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x1E00, Trap_1E, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x1F00, Trap_1F, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1A00, Trap_1A, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1B00, Trap_1B, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1C00, Trap_1C, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1D00, Trap_1D, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1E00, Trap_1E, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1F00, Trap_1F, unknown_exception, EXC_XFER_EE)
 
 /* Check for a single step debug exception while in an exception
  * handler before state has been saved.  This is to catch the case
@@ -988,10 +988,14 @@ _GLOBAL(set_context)
  * goes at the beginning of the data segment, which is page-aligned.
  */
 	.data
-_GLOBAL(sdata)
-_GLOBAL(empty_zero_page)
+	.align	12
+	.globl	sdata
+sdata:
+	.globl	empty_zero_page
+empty_zero_page:
 	.space	4096
-_GLOBAL(swapper_pg_dir)
+	.globl	swapper_pg_dir
+swapper_pg_dir:
 	.space	4096
 
 
@@ -1001,12 +1005,14 @@ _GLOBAL(swapper_pg_dir)
 exception_stack_bottom:
 	.space	4096
 critical_stack_top:
-_GLOBAL(exception_stack_top)
+	.globl	exception_stack_top
+exception_stack_top:
 
 /* This space gets a copy of optional info passed to us by the bootstrap
  * which is used to pass parameters into the kernel like root=/dev/sda1, etc.
  */
-_GLOBAL(cmd_line)
+	.globl	cmd_line
+cmd_line:
 	.space	512
 
 /* Room for two PTE pointers, usually the kernel and current user pointers
diff --git a/arch/ppc/kernel/head_8xx.S b/arch/ppc/kernel/head_8xx.S
index cb1a3a54a026..de0978742221 100644
--- a/arch/ppc/kernel/head_8xx.S
+++ b/arch/ppc/kernel/head_8xx.S
@@ -203,7 +203,7 @@ i##n:								\
 			  ret_from_except)
 
 /* System reset */
-	EXCEPTION(0x100, Reset, UnknownException, EXC_XFER_STD)
+	EXCEPTION(0x100, Reset, unknown_exception, EXC_XFER_STD)
 
 /* Machine check */
 	. = 0x200
@@ -214,7 +214,7 @@ MachineCheck:
 	mfspr r5,SPRN_DSISR
 	stw r5,_DSISR(r11)
 	addi r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_STD(0x200, MachineCheckException)
+	EXC_XFER_STD(0x200, machine_check_exception)
 
 /* Data access exception.
  * This is "never generated" by the MPC8xx.  We jump to it for other
@@ -252,20 +252,20 @@ Alignment:
 	mfspr	r5,SPRN_DSISR
 	stw	r5,_DSISR(r11)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE(0x600, AlignmentException)
+	EXC_XFER_EE(0x600, alignment_exception)
 
 /* Program check exception */
-	EXCEPTION(0x700, ProgramCheck, ProgramCheckException, EXC_XFER_STD)
+	EXCEPTION(0x700, ProgramCheck, program_check_exception, EXC_XFER_STD)
 
 /* No FPU on MPC8xx.  This exception is not supposed to happen.
 */
-	EXCEPTION(0x800, FPUnavailable, UnknownException, EXC_XFER_STD)
+	EXCEPTION(0x800, FPUnavailable, unknown_exception, EXC_XFER_STD)
 
 /* Decrementer */
 	EXCEPTION(0x900, Decrementer, timer_interrupt, EXC_XFER_LITE)
 
-	EXCEPTION(0xa00, Trap_0a, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0xb00, Trap_0b, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0xa00, Trap_0a, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0xb00, Trap_0b, unknown_exception, EXC_XFER_EE)
 
 /* System call */
 	. = 0xc00
@@ -274,9 +274,9 @@ SystemCall:
 	EXC_XFER_EE_LITE(0xc00, DoSyscall)
 
 /* Single step - not used on 601 */
-	EXCEPTION(0xd00, SingleStep, SingleStepException, EXC_XFER_STD)
-	EXCEPTION(0xe00, Trap_0e, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0xf00, Trap_0f, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0xd00, SingleStep, single_step_exception, EXC_XFER_STD)
+	EXCEPTION(0xe00, Trap_0e, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0xf00, Trap_0f, unknown_exception, EXC_XFER_EE)
 
 /* On the MPC8xx, this is a software emulation interrupt.  It occurs
  * for all unimplemented and illegal instructions.
@@ -540,22 +540,22 @@ DataTLBError:
 #endif
 	b	DataAccess
 
-	EXCEPTION(0x1500, Trap_15, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x1600, Trap_16, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x1700, Trap_17, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x1800, Trap_18, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x1900, Trap_19, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x1a00, Trap_1a, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x1b00, Trap_1b, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1700, Trap_17, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1a00, Trap_1a, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1b00, Trap_1b, unknown_exception, EXC_XFER_EE)
 
 /* On the MPC8xx, these next four traps are used for development
  * support of breakpoints and such.  Someday I will get around to
  * using them.
  */
-	EXCEPTION(0x1c00, Trap_1c, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x1d00, Trap_1d, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x1e00, Trap_1e, UnknownException, EXC_XFER_EE)
-	EXCEPTION(0x1f00, Trap_1f, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x1c00, Trap_1c, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1d00, Trap_1d, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1e00, Trap_1e, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1f00, Trap_1f, unknown_exception, EXC_XFER_EE)
 
 	. = 0x2000
 
diff --git a/arch/ppc/kernel/head_booke.h b/arch/ppc/kernel/head_booke.h
index 9342acf12e72..f3d274c6b231 100644
--- a/arch/ppc/kernel/head_booke.h
+++ b/arch/ppc/kernel/head_booke.h
@@ -335,7 +335,7 @@ label:
 	mfspr   r4,SPRN_DEAR;           /* Grab the DEAR and save it */	      \
 	stw     r4,_DEAR(r11);						      \
 	addi    r3,r1,STACK_FRAME_OVERHEAD;				      \
-	EXC_XFER_EE(0x0600, AlignmentException)
+	EXC_XFER_EE(0x0600, alignment_exception)
 
 #define PROGRAM_EXCEPTION						      \
 	START_EXCEPTION(Program)					      \
@@ -343,7 +343,7 @@ label:
 	mfspr	r4,SPRN_ESR;		/* Grab the ESR and save it */	      \
 	stw	r4,_ESR(r11);						      \
 	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
-	EXC_XFER_STD(0x0700, ProgramCheckException)
+	EXC_XFER_STD(0x0700, program_check_exception)
 
 #define DECREMENTER_EXCEPTION						      \
 	START_EXCEPTION(Decrementer)					      \
@@ -358,6 +358,6 @@ label:
 	NORMAL_EXCEPTION_PROLOG;					      \
 	bne	load_up_fpu;		/* if from user, just load it up */   \
 	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
-	EXC_XFER_EE_LITE(0x800, KernelFP)
+	EXC_XFER_EE_LITE(0x800, kernel_fp_unavailable_exception)
 
 #endif /* __HEAD_BOOKE_H__ */
diff --git a/arch/ppc/kernel/head_fsl_booke.S b/arch/ppc/kernel/head_fsl_booke.S
index 8e52e8408316..8d60fa99fc4b 100644
--- a/arch/ppc/kernel/head_fsl_booke.S
+++ b/arch/ppc/kernel/head_fsl_booke.S
@@ -24,7 +24,7 @@
  *    Copyright 2002-2004 MontaVista Software, Inc.
  *      PowerPC 44x support, Matt Porter <mporter@kernel.crashing.org>
  *    Copyright 2004 Freescale Semiconductor, Inc
- *      PowerPC e500 modifications, Kumar Gala <kumar.gala@freescale.com>
+ *      PowerPC e500 modifications, Kumar Gala <galak@kernel.crashing.org>
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -426,14 +426,14 @@ skpinv:	addi	r6,r6,1				/* Increment */
 
 interrupt_base:
 	/* Critical Input Interrupt */
-	CRITICAL_EXCEPTION(0x0100, CriticalInput, UnknownException)
+	CRITICAL_EXCEPTION(0x0100, CriticalInput, unknown_exception)
 
 	/* Machine Check Interrupt */
 #ifdef CONFIG_E200
 	/* no RFMCI, MCSRRs on E200 */
-	CRITICAL_EXCEPTION(0x0200, MachineCheck, MachineCheckException)
+	CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
 #else
-	MCHECK_EXCEPTION(0x0200, MachineCheck, MachineCheckException)
+	MCHECK_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
 #endif
 
 	/* Data Storage Interrupt */
@@ -542,9 +542,9 @@ interrupt_base:
 #else
 #ifdef CONFIG_E200
 	/* E200 treats 'normal' floating point instructions as FP Unavail exception */
-	EXCEPTION(0x0800, FloatingPointUnavailable, ProgramCheckException, EXC_XFER_EE)
+	EXCEPTION(0x0800, FloatingPointUnavailable, program_check_exception, EXC_XFER_EE)
 #else
-	EXCEPTION(0x0800, FloatingPointUnavailable, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x0800, FloatingPointUnavailable, unknown_exception, EXC_XFER_EE)
 #endif
 #endif
 
@@ -554,20 +554,20 @@ interrupt_base:
 	EXC_XFER_EE_LITE(0x0c00, DoSyscall)
 
 	/* Auxillary Processor Unavailable Interrupt */
-	EXCEPTION(0x2900, AuxillaryProcessorUnavailable, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x2900, AuxillaryProcessorUnavailable, unknown_exception, EXC_XFER_EE)
 
 	/* Decrementer Interrupt */
 	DECREMENTER_EXCEPTION
 
 	/* Fixed Internal Timer Interrupt */
 	/* TODO: Add FIT support */
-	EXCEPTION(0x3100, FixedIntervalTimer, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x3100, FixedIntervalTimer, unknown_exception, EXC_XFER_EE)
 
 	/* Watchdog Timer Interrupt */
 #ifdef CONFIG_BOOKE_WDT
 	CRITICAL_EXCEPTION(0x3200, WatchdogTimer, WatchdogException)
 #else
-	CRITICAL_EXCEPTION(0x3200, WatchdogTimer, UnknownException)
+	CRITICAL_EXCEPTION(0x3200, WatchdogTimer, unknown_exception)
 #endif
 
 	/* Data TLB Error Interrupt */
@@ -696,21 +696,21 @@ interrupt_base:
 	addi    r3,r1,STACK_FRAME_OVERHEAD
 	EXC_XFER_EE_LITE(0x2010, KernelSPE)
 #else
-	EXCEPTION(0x2020, SPEUnavailable, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x2020, SPEUnavailable, unknown_exception, EXC_XFER_EE)
 #endif /* CONFIG_SPE */
 
 	/* SPE Floating Point Data */
 #ifdef CONFIG_SPE
 	EXCEPTION(0x2030, SPEFloatingPointData, SPEFloatingPointException, EXC_XFER_EE);
 #else
-	EXCEPTION(0x2040, SPEFloatingPointData, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x2040, SPEFloatingPointData, unknown_exception, EXC_XFER_EE)
 #endif /* CONFIG_SPE */
 
 	/* SPE Floating Point Round */
-	EXCEPTION(0x2050, SPEFloatingPointRound, UnknownException, EXC_XFER_EE)
+	EXCEPTION(0x2050, SPEFloatingPointRound, unknown_exception, EXC_XFER_EE)
 
 	/* Performance Monitor */
-	EXCEPTION(0x2060, PerformanceMonitor, PerformanceMonitorException, EXC_XFER_STD)
+	EXCEPTION(0x2060, PerformanceMonitor, performance_monitor_exception, EXC_XFER_STD)
 
 
 	/* Debug Interrupt */
@@ -853,7 +853,7 @@ load_up_spe:
 	cmpi	0,r4,0
 	beq	1f
 	addi	r4,r4,THREAD	/* want THREAD of last_task_used_spe */
-	SAVE_32EVR(0,r10,r4)
+	SAVE_32EVRS(0,r10,r4)
    	evxor	evr10, evr10, evr10	/* clear out evr10 */
 	evmwumiaa evr10, evr10, evr10	/* evr10 <- ACC = 0 * 0 + ACC */
 	li	r5,THREAD_ACC
@@ -873,7 +873,7 @@ load_up_spe:
 	stw	r4,THREAD_USED_SPE(r5)
 	evlddx	evr4,r10,r5
 	evmra	evr4,evr4
-	REST_32EVR(0,r10,r5)
+	REST_32EVRS(0,r10,r5)
 #ifndef CONFIG_SMP
 	subi	r4,r5,THREAD
 	stw	r4,last_task_used_spe@l(r3)
@@ -963,7 +963,7 @@ _GLOBAL(giveup_spe)
 	addi	r3,r3,THREAD		/* want THREAD of task */
 	lwz	r5,PT_REGS(r3)
 	cmpi	0,r5,0
-	SAVE_32EVR(0, r4, r3)
+	SAVE_32EVRS(0, r4, r3)
    	evxor	evr6, evr6, evr6	/* clear out evr6 */
 	evmwumiaa evr6, evr6, evr6	/* evr6 <- ACC = 0 * 0 + ACC */
 	li	r4,THREAD_ACC
@@ -1028,10 +1028,14 @@ _GLOBAL(set_context)
  * goes at the beginning of the data segment, which is page-aligned.
  */
 	.data
-_GLOBAL(sdata)
-_GLOBAL(empty_zero_page)
+	.align	12
+	.globl	sdata
+sdata:
+	.globl	empty_zero_page
+empty_zero_page:
 	.space	4096
-_GLOBAL(swapper_pg_dir)
+	.globl	swapper_pg_dir
+swapper_pg_dir:
 	.space	4096
 
 /* Reserved 4k for the critical exception stack & 4k for the machine
@@ -1040,13 +1044,15 @@ _GLOBAL(swapper_pg_dir)
         .align 12
 exception_stack_bottom:
 	.space	BOOKE_EXCEPTION_STACK_SIZE * NR_CPUS
-_GLOBAL(exception_stack_top)
+	.globl	exception_stack_top
+exception_stack_top:
 
 /*
  * This space gets a copy of optional info passed to us by the bootstrap
  * which is used to pass parameters into the kernel like root=/dev/sda1, etc.
  */
-_GLOBAL(cmd_line)
+	.globl	cmd_line
+cmd_line:
 	.space	512
 
 /*
@@ -1055,4 +1061,3 @@ _GLOBAL(cmd_line)
  */
 abatron_pteptrs:
 	.space	8
-
diff --git a/arch/ppc/kernel/idle.c b/arch/ppc/kernel/idle.c
index fba29c876b62..821a75e45602 100644
--- a/arch/ppc/kernel/idle.c
+++ b/arch/ppc/kernel/idle.c
@@ -32,6 +32,7 @@
 #include <asm/cache.h>
 #include <asm/cputable.h>
 #include <asm/machdep.h>
+#include <asm/smp.h>
 
 void default_idle(void)
 {
@@ -52,10 +53,6 @@ void default_idle(void)
 		}
 #endif
 	}
-	if (need_resched())
-		schedule();
-	if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING)
-		cpu_die();
 }
 
 /*
@@ -63,18 +60,29 @@ void default_idle(void)
  */
 void cpu_idle(void)
 {
-	for (;;)
-		if (ppc_md.idle != NULL)
-			ppc_md.idle();
-		else
-			default_idle();
+	int cpu = smp_processor_id();
+
+	for (;;) {
+		while (!need_resched()) {
+			if (ppc_md.idle != NULL)
+				ppc_md.idle();
+			else
+				default_idle();
+		}
+
+		if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING)
+			cpu_die();
+		preempt_enable_no_resched();
+		schedule();
+		preempt_disable();
+	}
 }
 
 #if defined(CONFIG_SYSCTL) && defined(CONFIG_6xx)
 /*
  * Register the sysctl to set/clear powersave_nap.
  */
-extern unsigned long powersave_nap;
+extern int powersave_nap;
 
 static ctl_table powersave_nap_ctl_table[]={
 	{
diff --git a/arch/ppc/kernel/irq.c b/arch/ppc/kernel/irq.c
deleted file mode 100644
index 8843f3af230f..000000000000
--- a/arch/ppc/kernel/irq.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- *  arch/ppc/kernel/irq.c
- *
- *  Derived from arch/i386/kernel/irq.c
- *    Copyright (C) 1992 Linus Torvalds
- *  Adapted from arch/i386 by Gary Thomas
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *  Updated and modified by Cort Dougan <cort@fsmlabs.com>
- *    Copyright (C) 1996-2001 Cort Dougan
- *  Adapted for Power Macintosh by Paul Mackerras
- *    Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au)
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- * This file contains the code used by various IRQ handling routines:
- * asking for different IRQ's should be done through these routines
- * instead of just grabbing them. Thus setups with different IRQ numbers
- * shouldn't result in any weird surprises, and installing new handlers
- * should be easier.
- *
- * The MPC8xx has an interrupt mask in the SIU.  If a bit is set, the
- * interrupt is _enabled_.  As expected, IRQ0 is bit 0 in the 32-bit
- * mask register (of which only 16 are defined), hence the weird shifting
- * and complement of the cached_irq_mask.  I want to be able to stuff
- * this right into the SIU SMASK register.
- * Many of the prep/chrp functions are conditional compiled on CONFIG_8xx
- * to reduce code space and undefined function references.
- */
-
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/threads.h>
-#include <linux/kernel_stat.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/ptrace.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/timex.h>
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/proc_fs.h>
-#include <linux/random.h>
-#include <linux/seq_file.h>
-#include <linux/cpumask.h>
-#include <linux/profile.h>
-#include <linux/bitops.h>
-
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/irq.h>
-#include <asm/cache.h>
-#include <asm/prom.h>
-#include <asm/ptrace.h>
-
-#define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
-
-extern atomic_t ipi_recv;
-extern atomic_t ipi_sent;
-
-#define MAXCOUNT 10000000
-
-int ppc_spurious_interrupts = 0;
-struct irqaction *ppc_irq_action[NR_IRQS];
-unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
-unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
-atomic_t ppc_n_lost_interrupts;
-
-#ifdef CONFIG_TAU_INT
-extern int tau_initialized;
-extern int tau_interrupts(int);
-#endif
-
-int show_interrupts(struct seq_file *p, void *v)
-{
-	int i = *(loff_t *) v, j;
-	struct irqaction * action;
-	unsigned long flags;
-
-	if (i == 0) {
-		seq_puts(p, "           ");
-		for (j=0; j<NR_CPUS; j++)
-			if (cpu_online(j))
-				seq_printf(p, "CPU%d       ", j);
-		seq_putc(p, '\n');
-	}
-
-	if (i < NR_IRQS) {
-		spin_lock_irqsave(&irq_desc[i].lock, flags);
-		action = irq_desc[i].action;
-		if ( !action || !action->handler )
-			goto skip;
-		seq_printf(p, "%3d: ", i);
-#ifdef CONFIG_SMP
-		for (j = 0; j < NR_CPUS; j++)
-			if (cpu_online(j))
-				seq_printf(p, "%10u ",
-					   kstat_cpu(j).irqs[i]);
-#else
-		seq_printf(p, "%10u ", kstat_irqs(i));
-#endif /* CONFIG_SMP */
-		if (irq_desc[i].handler)
-			seq_printf(p, " %s ", irq_desc[i].handler->typename);
-		else
-			seq_puts(p, "  None      ");
-		seq_printf(p, "%s", (irq_desc[i].status & IRQ_LEVEL) ? "Level " : "Edge  ");
-		seq_printf(p, "    %s", action->name);
-		for (action = action->next; action; action = action->next)
-			seq_printf(p, ", %s", action->name);
-		seq_putc(p, '\n');
-skip:
-		spin_unlock_irqrestore(&irq_desc[i].lock, flags);
-	} else if (i == NR_IRQS) {
-#ifdef CONFIG_TAU_INT
-		if (tau_initialized){
-			seq_puts(p, "TAU: ");
-			for (j = 0; j < NR_CPUS; j++)
-				if (cpu_online(j))
-					seq_printf(p, "%10u ", tau_interrupts(j));
-			seq_puts(p, "  PowerPC             Thermal Assist (cpu temp)\n");
-		}
-#endif
-#ifdef CONFIG_SMP
-		/* should this be per processor send/receive? */
-		seq_printf(p, "IPI (recv/sent): %10u/%u\n",
-				atomic_read(&ipi_recv), atomic_read(&ipi_sent));
-#endif
-		seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts);
-	}
-	return 0;
-}
-
-void do_IRQ(struct pt_regs *regs)
-{
-	int irq, first = 1;
-        irq_enter();
-
-	/*
-	 * Every platform is required to implement ppc_md.get_irq.
-	 * This function will either return an irq number or -1 to
-	 * indicate there are no more pending.  But the first time
-	 * through the loop this means there wasn't and IRQ pending.
-	 * The value -2 is for buggy hardware and means that this IRQ
-	 * has already been handled. -- Tom
-	 */
-	while ((irq = ppc_md.get_irq(regs)) >= 0) {
-		__do_IRQ(irq, regs);
-		first = 0;
-	}
-	if (irq != -2 && first)
-		/* That's not SMP safe ... but who cares ? */
-		ppc_spurious_interrupts++;
-        irq_exit();
-}
-
-void __init init_IRQ(void)
-{
-	ppc_md.init_IRQ();
-}
diff --git a/arch/ppc/kernel/l2cr.S b/arch/ppc/kernel/l2cr.S
index 861115249b35..d7f4e982b539 100644
--- a/arch/ppc/kernel/l2cr.S
+++ b/arch/ppc/kernel/l2cr.S
@@ -203,7 +203,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450)
 	 * L1 icache
 	 */
 	b	20f
-	.balign	L1_CACHE_LINE_SIZE
+	.balign	L1_CACHE_BYTES
 22:
 	sync
 	mtspr	SPRN_L2CR,r3
diff --git a/arch/ppc/kernel/machine_kexec.c b/arch/ppc/kernel/machine_kexec.c
index a72787747df7..a882b0dbe8de 100644
--- a/arch/ppc/kernel/machine_kexec.c
+++ b/arch/ppc/kernel/machine_kexec.c
@@ -32,7 +32,7 @@ const extern unsigned int relocate_new_kernel_size;
  * Provide a dummy crash_notes definition while crash dump arrives to ppc.
  * This prevents breakage of crash_notes attribute in kernel/ksysfs.c.
  */
-void *crash_notes = NULL;
+note_buf_t crash_notes[NR_CPUS];
 
 void machine_shutdown(void)
 {
diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S
index 90d917d2e856..5e61124581d0 100644
--- a/arch/ppc/kernel/misc.S
+++ b/arch/ppc/kernel/misc.S
@@ -25,6 +25,11 @@
 #include <asm/thread_info.h>
 #include <asm/asm-offsets.h>
 
+#ifdef CONFIG_8xx
+#define ISYNC_8xx isync
+#else
+#define ISYNC_8xx
+#endif
 	.text
 
 	.align	5
@@ -125,9 +130,8 @@ _GLOBAL(identify_cpu)
 1:
 	addis	r6,r3,cur_cpu_spec@ha
 	addi	r6,r6,cur_cpu_spec@l
-	slwi	r4,r4,2
 	sub	r8,r8,r3
-	stwx	r8,r4,r6
+	stw	r8,0(r6)
 	blr
 
 /*
@@ -186,19 +190,18 @@ _GLOBAL(do_cpu_ftr_fixups)
  *
  * Setup function is called with:
  *   r3 = data offset
- *   r4 = CPU number
- *   r5 = ptr to CPU spec (relocated)
+ *   r4 = ptr to CPU spec (relocated)
  */
 _GLOBAL(call_setup_cpu)
-	addis	r5,r3,cur_cpu_spec@ha
-	addi	r5,r5,cur_cpu_spec@l
-	slwi	r4,r24,2
-	lwzx	r5,r4,r5
+	addis	r4,r3,cur_cpu_spec@ha
+	addi	r4,r4,cur_cpu_spec@l
+	lwz	r4,0(r4)
+	add	r4,r4,r3
+	lwz	r5,CPU_SPEC_SETUP(r4)
+	cmpi	0,r5,0
 	add	r5,r5,r3
-	lwz	r6,CPU_SPEC_SETUP(r5)
-	add	r6,r6,r3
-	mtctr	r6
-	mr	r4,r24
+	beqlr
+	mtctr	r5
 	bctr
 
 #if defined(CONFIG_CPU_FREQ_PMAC) && defined(CONFIG_6xx)
@@ -273,134 +276,6 @@ _GLOBAL(low_choose_7447a_dfs)
 
 #endif /* CONFIG_CPU_FREQ_PMAC && CONFIG_6xx */
 
-/* void local_save_flags_ptr(unsigned long *flags) */
-_GLOBAL(local_save_flags_ptr)
-	mfmsr	r4
-	stw	r4,0(r3)
-	blr
-	/*
-	 * Need these nops here for taking over save/restore to
-	 * handle lost intrs
-	 * -- Cort
-	 */
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-_GLOBAL(local_save_flags_ptr_end)
-
-/* void local_irq_restore(unsigned long flags) */
-_GLOBAL(local_irq_restore)
-/*
- * Just set/clear the MSR_EE bit through restore/flags but do not
- * change anything else.  This is needed by the RT system and makes
- * sense anyway.
- *    -- Cort
- */
-	mfmsr 	r4
-	/* Copy all except the MSR_EE bit from r4 (current MSR value)
-	   to r3.  This is the sort of thing the rlwimi instruction is
-	   designed for.  -- paulus. */
-	rlwimi	r3,r4,0,17,15
-	 /* Check if things are setup the way we want _already_. */
-	cmpw	0,r3,r4
-	beqlr
-1:	SYNC
-	mtmsr	r3
-	SYNC
-	blr
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-_GLOBAL(local_irq_restore_end)
-
-_GLOBAL(local_irq_disable)
-	mfmsr	r0		/* Get current interrupt state */
-	rlwinm	r3,r0,16+1,32-1,31	/* Extract old value of 'EE' */
-	rlwinm	r0,r0,0,17,15	/* clear MSR_EE in r0 */
-	SYNC			/* Some chip revs have problems here... */
-	mtmsr	r0		/* Update machine state */
-	blr			/* Done */
-	/*
-	 * Need these nops here for taking over save/restore to
-	 * handle lost intrs
-	 * -- Cort
-	 */
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-_GLOBAL(local_irq_disable_end)
-
-_GLOBAL(local_irq_enable)
-	mfmsr	r3		/* Get current state */
-	ori	r3,r3,MSR_EE	/* Turn on 'EE' bit */
-	SYNC			/* Some chip revs have problems here... */
-	mtmsr	r3		/* Update machine state */
-	blr
-	/*
-	 * Need these nops here for taking over save/restore to
-	 * handle lost intrs
-	 * -- Cort
-	 */
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-_GLOBAL(local_irq_enable_end)
-
 /*
  * complement mask on the msr then "or" some values on.
  *     _nmask_and_or_msr(nmask, value_to_or)
@@ -622,27 +497,27 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE)
  * and invalidate the corresponding instruction cache blocks.
  * This is a no-op on the 601.
  *
- * flush_icache_range(unsigned long start, unsigned long stop)
+ * __flush_icache_range(unsigned long start, unsigned long stop)
  */
-_GLOBAL(flush_icache_range)
+_GLOBAL(__flush_icache_range)
 BEGIN_FTR_SECTION
 	blr				/* for 601, do nothing */
 END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE)
-	li	r5,L1_CACHE_LINE_SIZE-1
+	li	r5,L1_CACHE_BYTES-1
 	andc	r3,r3,r5
 	subf	r4,r3,r4
 	add	r4,r4,r5
-	srwi.	r4,r4,LG_L1_CACHE_LINE_SIZE
+	srwi.	r4,r4,L1_CACHE_SHIFT
 	beqlr
 	mtctr	r4
 	mr	r6,r3
 1:	dcbst	0,r3
-	addi	r3,r3,L1_CACHE_LINE_SIZE
+	addi	r3,r3,L1_CACHE_BYTES
 	bdnz	1b
 	sync				/* wait for dcbst's to get to ram */
 	mtctr	r4
 2:	icbi	0,r6
-	addi	r6,r6,L1_CACHE_LINE_SIZE
+	addi	r6,r6,L1_CACHE_BYTES
 	bdnz	2b
 	sync				/* additional sync needed on g4 */
 	isync
@@ -655,16 +530,16 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE)
  * clean_dcache_range(unsigned long start, unsigned long stop)
  */
 _GLOBAL(clean_dcache_range)
-	li	r5,L1_CACHE_LINE_SIZE-1
+	li	r5,L1_CACHE_BYTES-1
 	andc	r3,r3,r5
 	subf	r4,r3,r4
 	add	r4,r4,r5
-	srwi.	r4,r4,LG_L1_CACHE_LINE_SIZE
+	srwi.	r4,r4,L1_CACHE_SHIFT
 	beqlr
 	mtctr	r4
 
 1:	dcbst	0,r3
-	addi	r3,r3,L1_CACHE_LINE_SIZE
+	addi	r3,r3,L1_CACHE_BYTES
 	bdnz	1b
 	sync				/* wait for dcbst's to get to ram */
 	blr
@@ -676,16 +551,16 @@ _GLOBAL(clean_dcache_range)
  * flush_dcache_range(unsigned long start, unsigned long stop)
  */
 _GLOBAL(flush_dcache_range)
-	li	r5,L1_CACHE_LINE_SIZE-1
+	li	r5,L1_CACHE_BYTES-1
 	andc	r3,r3,r5
 	subf	r4,r3,r4
 	add	r4,r4,r5
-	srwi.	r4,r4,LG_L1_CACHE_LINE_SIZE
+	srwi.	r4,r4,L1_CACHE_SHIFT
 	beqlr
 	mtctr	r4
 
 1:	dcbf	0,r3
-	addi	r3,r3,L1_CACHE_LINE_SIZE
+	addi	r3,r3,L1_CACHE_BYTES
 	bdnz	1b
 	sync				/* wait for dcbst's to get to ram */
 	blr
@@ -698,16 +573,16 @@ _GLOBAL(flush_dcache_range)
  * invalidate_dcache_range(unsigned long start, unsigned long stop)
  */
 _GLOBAL(invalidate_dcache_range)
-	li	r5,L1_CACHE_LINE_SIZE-1
+	li	r5,L1_CACHE_BYTES-1
 	andc	r3,r3,r5
 	subf	r4,r3,r4
 	add	r4,r4,r5
-	srwi.	r4,r4,LG_L1_CACHE_LINE_SIZE
+	srwi.	r4,r4,L1_CACHE_SHIFT
 	beqlr
 	mtctr	r4
 
 1:	dcbi	0,r3
-	addi	r3,r3,L1_CACHE_LINE_SIZE
+	addi	r3,r3,L1_CACHE_BYTES
 	bdnz	1b
 	sync				/* wait for dcbi's to get to ram */
 	blr
@@ -728,7 +603,7 @@ _GLOBAL(flush_dcache_all)
 	mtctr	r4
 	lis     r5, KERNELBASE@h
 1:	lwz	r3, 0(r5)		/* Load one word from every line */
-	addi	r5, r5, L1_CACHE_LINE_SIZE
+	addi	r5, r5, L1_CACHE_BYTES
 	bdnz    1b
 	blr
 #endif /* CONFIG_NOT_COHERENT_CACHE */
@@ -746,16 +621,16 @@ BEGIN_FTR_SECTION
 	blr					/* for 601, do nothing */
 END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE)
 	rlwinm	r3,r3,0,0,19			/* Get page base address */
-	li	r4,4096/L1_CACHE_LINE_SIZE	/* Number of lines in a page */
+	li	r4,4096/L1_CACHE_BYTES	/* Number of lines in a page */
 	mtctr	r4
 	mr	r6,r3
 0:	dcbst	0,r3				/* Write line to ram */
-	addi	r3,r3,L1_CACHE_LINE_SIZE
+	addi	r3,r3,L1_CACHE_BYTES
 	bdnz	0b
 	sync
 	mtctr	r4
 1:	icbi	0,r6
-	addi	r6,r6,L1_CACHE_LINE_SIZE
+	addi	r6,r6,L1_CACHE_BYTES
 	bdnz	1b
 	sync
 	isync
@@ -778,16 +653,16 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE)
 	mtmsr	r0
 	isync
 	rlwinm	r3,r3,0,0,19			/* Get page base address */
-	li	r4,4096/L1_CACHE_LINE_SIZE	/* Number of lines in a page */
+	li	r4,4096/L1_CACHE_BYTES	/* Number of lines in a page */
 	mtctr	r4
 	mr	r6,r3
 0:	dcbst	0,r3				/* Write line to ram */
-	addi	r3,r3,L1_CACHE_LINE_SIZE
+	addi	r3,r3,L1_CACHE_BYTES
 	bdnz	0b
 	sync
 	mtctr	r4
 1:	icbi	0,r6
-	addi	r6,r6,L1_CACHE_LINE_SIZE
+	addi	r6,r6,L1_CACHE_BYTES
 	bdnz	1b
 	sync
 	mtmsr	r10				/* restore DR */
@@ -802,7 +677,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE)
  * void clear_pages(void *page, int order) ;
  */
 _GLOBAL(clear_pages)
-	li	r0,4096/L1_CACHE_LINE_SIZE
+	li	r0,4096/L1_CACHE_BYTES
 	slw	r0,r0,r4
 	mtctr	r0
 #ifdef CONFIG_8xx
@@ -814,7 +689,7 @@ _GLOBAL(clear_pages)
 #else
 1:	dcbz	0,r3
 #endif
-	addi	r3,r3,L1_CACHE_LINE_SIZE
+	addi	r3,r3,L1_CACHE_BYTES
 	bdnz	1b
 	blr
 
@@ -840,7 +715,7 @@ _GLOBAL(copy_page)
 
 #ifdef CONFIG_8xx
 	/* don't use prefetch on 8xx */
-    	li	r0,4096/L1_CACHE_LINE_SIZE
+    	li	r0,4096/L1_CACHE_BYTES
 	mtctr	r0
 1:	COPY_16_BYTES
 	bdnz	1b
@@ -854,13 +729,13 @@ _GLOBAL(copy_page)
 	li	r11,4
 	mtctr	r0
 11:	dcbt	r11,r4
-	addi	r11,r11,L1_CACHE_LINE_SIZE
+	addi	r11,r11,L1_CACHE_BYTES
 	bdnz	11b
 #else /* MAX_COPY_PREFETCH == 1 */
 	dcbt	r5,r4
-	li	r11,L1_CACHE_LINE_SIZE+4
+	li	r11,L1_CACHE_BYTES+4
 #endif /* MAX_COPY_PREFETCH */
-	li	r0,4096/L1_CACHE_LINE_SIZE - MAX_COPY_PREFETCH
+	li	r0,4096/L1_CACHE_BYTES - MAX_COPY_PREFETCH
 	crclr	4*cr0+eq
 2:
 	mtctr	r0
@@ -868,12 +743,12 @@ _GLOBAL(copy_page)
 	dcbt	r11,r4
 	dcbz	r5,r3
 	COPY_16_BYTES
-#if L1_CACHE_LINE_SIZE >= 32
+#if L1_CACHE_BYTES >= 32
 	COPY_16_BYTES
-#if L1_CACHE_LINE_SIZE >= 64
+#if L1_CACHE_BYTES >= 64
 	COPY_16_BYTES
 	COPY_16_BYTES
-#if L1_CACHE_LINE_SIZE >= 128
+#if L1_CACHE_BYTES >= 128
 	COPY_16_BYTES
 	COPY_16_BYTES
 	COPY_16_BYTES
@@ -930,8 +805,18 @@ _GLOBAL(_insb)
 	subi	r4,r4,1
 	blelr-
 00:	lbz	r5,0(r3)
-	eieio
-	stbu	r5,1(r4)
+01:	eieio
+02:	stbu	r5,1(r4)
+	ISYNC_8xx
+	.section .fixup,"ax"
+03:	blr
+	.text
+	.section __ex_table, "a"
+		.align 2
+		.long 00b, 03b
+		.long 01b, 03b
+		.long 02b, 03b
+	.text
 	bdnz	00b
 	blr
 
@@ -941,8 +826,18 @@ _GLOBAL(_outsb)
 	subi	r4,r4,1
 	blelr-
 00:	lbzu	r5,1(r4)
-	stb	r5,0(r3)
-	eieio
+01:	stb	r5,0(r3)
+02:	eieio
+	ISYNC_8xx
+	.section .fixup,"ax"
+03:	blr
+	.text
+	.section __ex_table, "a"
+		.align 2
+		.long 00b, 03b
+		.long 01b, 03b
+		.long 02b, 03b
+	.text
 	bdnz	00b
 	blr
 
@@ -952,8 +847,18 @@ _GLOBAL(_insw)
 	subi	r4,r4,2
 	blelr-
 00:	lhbrx	r5,0,r3
-	eieio
-	sthu	r5,2(r4)
+01:	eieio
+02:	sthu	r5,2(r4)
+	ISYNC_8xx
+	.section .fixup,"ax"
+03:	blr
+	.text
+	.section __ex_table, "a"
+		.align 2
+		.long 00b, 03b
+		.long 01b, 03b
+		.long 02b, 03b
+	.text
 	bdnz	00b
 	blr
 
@@ -963,8 +868,18 @@ _GLOBAL(_outsw)
 	subi	r4,r4,2
 	blelr-
 00:	lhzu	r5,2(r4)
-	eieio
-	sthbrx	r5,0,r3
+01:	eieio
+02:	sthbrx	r5,0,r3
+	ISYNC_8xx
+	.section .fixup,"ax"
+03:	blr
+	.text
+	.section __ex_table, "a"
+		.align 2
+		.long 00b, 03b
+		.long 01b, 03b
+		.long 02b, 03b
+	.text
 	bdnz	00b
 	blr
 
@@ -974,8 +889,18 @@ _GLOBAL(_insl)
 	subi	r4,r4,4
 	blelr-
 00:	lwbrx	r5,0,r3
-	eieio
-	stwu	r5,4(r4)
+01:	eieio
+02:	stwu	r5,4(r4)
+	ISYNC_8xx
+	.section .fixup,"ax"
+03:	blr
+	.text
+	.section __ex_table, "a"
+		.align 2
+		.long 00b, 03b
+		.long 01b, 03b
+		.long 02b, 03b
+	.text
 	bdnz	00b
 	blr
 
@@ -985,8 +910,18 @@ _GLOBAL(_outsl)
 	subi	r4,r4,4
 	blelr-
 00:	lwzu	r5,4(r4)
-	stwbrx	r5,0,r3
-	eieio
+01:	stwbrx	r5,0,r3
+02:	eieio
+	ISYNC_8xx
+	.section .fixup,"ax"
+03:	blr
+	.text
+	.section __ex_table, "a"
+		.align 2
+		.long 00b, 03b
+		.long 01b, 03b
+		.long 02b, 03b
+	.text
 	bdnz	00b
 	blr
 
@@ -997,8 +932,18 @@ _GLOBAL(_insw_ns)
 	subi	r4,r4,2
 	blelr-
 00:	lhz	r5,0(r3)
-	eieio
-	sthu	r5,2(r4)
+01:	eieio
+02:	sthu	r5,2(r4)
+	ISYNC_8xx
+	.section .fixup,"ax"
+03:	blr
+	.text
+	.section __ex_table, "a"
+		.align 2
+		.long 00b, 03b
+		.long 01b, 03b
+		.long 02b, 03b
+	.text
 	bdnz	00b
 	blr
 
@@ -1009,8 +954,18 @@ _GLOBAL(_outsw_ns)
 	subi	r4,r4,2
 	blelr-
 00:	lhzu	r5,2(r4)
-	sth	r5,0(r3)
-	eieio
+01:	sth	r5,0(r3)
+02:	eieio
+	ISYNC_8xx
+	.section .fixup,"ax"
+03:	blr
+	.text
+	.section __ex_table, "a"
+		.align 2
+		.long 00b, 03b
+		.long 01b, 03b
+		.long 02b, 03b
+	.text
 	bdnz	00b
 	blr
 
@@ -1021,8 +976,18 @@ _GLOBAL(_insl_ns)
 	subi	r4,r4,4
 	blelr-
 00:	lwz	r5,0(r3)
-	eieio
-	stwu	r5,4(r4)
+01:	eieio
+02:	stwu	r5,4(r4)
+	ISYNC_8xx
+	.section .fixup,"ax"
+03:	blr
+	.text
+	.section __ex_table, "a"
+		.align 2
+		.long 00b, 03b
+		.long 01b, 03b
+		.long 02b, 03b
+	.text
 	bdnz	00b
 	blr
 
@@ -1033,8 +998,18 @@ _GLOBAL(_outsl_ns)
 	subi	r4,r4,4
 	blelr-
 00:	lwzu	r5,4(r4)
-	stw	r5,0(r3)
-	eieio
+01:	stw	r5,0(r3)
+02:	eieio
+	ISYNC_8xx
+	.section .fixup,"ax"
+03:	blr
+	.text
+	.section __ex_table, "a"
+		.align 2
+		.long 00b, 03b
+		.long 01b, 03b
+		.long 02b, 03b
+	.text
 	bdnz	00b
 	blr
 
@@ -1098,33 +1073,6 @@ _GLOBAL(_get_SP)
 	blr
 
 /*
- * These are used in the alignment trap handler when emulating
- * single-precision loads and stores.
- * We restore and save the fpscr so the task gets the same result
- * and exceptions as if the cpu had performed the load or store.
- */
-
-#ifdef CONFIG_PPC_FPU
-_GLOBAL(cvt_fd)
-	lfd	0,-4(r5)	/* load up fpscr value */
-	mtfsf	0xff,0
-	lfs	0,0(r3)
-	stfd	0,0(r4)
-	mffs	0		/* save new fpscr value */
-	stfd	0,-4(r5)
-	blr
-
-_GLOBAL(cvt_df)
-	lfd	0,-4(r5)	/* load up fpscr value */
-	mtfsf	0xff,0
-	lfd	0,0(r3)
-	stfs	0,0(r4)
-	mffs	0		/* save new fpscr value */
-	stfd	0,-4(r5)
-	blr
-#endif
-
-/*
  * Create a kernel thread
  *   kernel_thread(fn, arg, flags)
  */
diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c
index 854e45beb387..f7fae5f153b2 100644
--- a/arch/ppc/kernel/pci.c
+++ b/arch/ppc/kernel/pci.c
@@ -21,6 +21,7 @@
 #include <asm/byteorder.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
+#include <asm/machdep.h>
 
 #undef DEBUG
 
@@ -44,7 +45,6 @@ static void update_bridge_base(struct pci_bus *bus, int i);
 static void pcibios_fixup_resources(struct pci_dev* dev);
 static void fixup_broken_pcnet32(struct pci_dev* dev);
 static int reparent_resources(struct resource *parent, struct resource *res);
-static void fixup_rev1_53c810(struct pci_dev* dev);
 static void fixup_cpc710_pci64(struct pci_dev* dev);
 #ifdef CONFIG_PPC_OF
 static u8* pci_to_OF_bus_map;
@@ -53,7 +53,7 @@ static u8* pci_to_OF_bus_map;
 /* By default, we don't re-assign bus numbers. We do this only on
  * some pmacs
  */
-int pci_assign_all_busses;
+int pci_assign_all_buses;
 
 struct pci_controller* hose_head;
 struct pci_controller** hose_tail = &hose_head;
@@ -61,20 +61,6 @@ struct pci_controller** hose_tail = &hose_head;
 static int pci_bus_count;
 
 static void
-fixup_rev1_53c810(struct pci_dev* dev)
-{
-	/* rev 1 ncr53c810 chips don't set the class at all which means
-	 * they don't get their resources remapped. Fix that here.
-	 */
-
-	if ((dev->class == PCI_CLASS_NOT_DEFINED)) {
-		printk("NCR 53c810 rev 1 detected, setting PCI class.\n");
-		dev->class = PCI_CLASS_STORAGE_SCSI;
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR,	PCI_DEVICE_ID_NCR_53C810,	fixup_rev1_53c810);
-
-static void
 fixup_broken_pcnet32(struct pci_dev* dev)
 {
 	if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) {
@@ -644,7 +630,7 @@ pcibios_alloc_controller(void)
 /*
  * Functions below are used on OpenFirmware machines.
  */
-static void __openfirmware
+static void
 make_one_node_map(struct device_node* node, u8 pci_bus)
 {
 	int *bus_range;
@@ -678,7 +664,7 @@ make_one_node_map(struct device_node* node, u8 pci_bus)
 	}
 }
 	
-void __openfirmware
+void
 pcibios_make_OF_bus_map(void)
 {
 	int i;
@@ -720,7 +706,7 @@ pcibios_make_OF_bus_map(void)
 
 typedef int (*pci_OF_scan_iterator)(struct device_node* node, void* data);
 
-static struct device_node* __openfirmware
+static struct device_node*
 scan_OF_pci_childs(struct device_node* node, pci_OF_scan_iterator filter, void* data)
 {
 	struct device_node* sub_node;
@@ -761,7 +747,7 @@ scan_OF_pci_childs_iterator(struct device_node* node, void* data)
 	return 0;
 }
 
-static struct device_node* __openfirmware
+static struct device_node*
 scan_OF_childs_for_device(struct device_node* node, u8 bus, u8 dev_fn)
 {
 	u8 filter_data[2] = {bus, dev_fn};
@@ -813,18 +799,20 @@ pci_busdev_to_OF_node(struct pci_bus *bus, int devfn)
 	/* Now, lookup childs of the hose */
 	return scan_OF_childs_for_device(node->child, busnr, devfn);
 }
+EXPORT_SYMBOL(pci_busdev_to_OF_node);
 
 struct device_node*
 pci_device_to_OF_node(struct pci_dev *dev)
 {
 	return pci_busdev_to_OF_node(dev->bus, dev->devfn);
 }
+EXPORT_SYMBOL(pci_device_to_OF_node);
 
 /* This routine is meant to be used early during boot, when the
  * PCI bus numbers have not yet been assigned, and you need to
  * issue PCI config cycles to an OF device.
  * It could also be used to "fix" RTAS config cycles if you want
- * to set pci_assign_all_busses to 1 and still use RTAS for PCI
+ * to set pci_assign_all_buses to 1 and still use RTAS for PCI
  * config cycles.
  */
 struct pci_controller*
@@ -842,7 +830,7 @@ pci_find_hose_for_OF_device(struct device_node* node)
 	return NULL;
 }
 
-static int __openfirmware
+static int
 find_OF_pci_device_filter(struct device_node* node, void* data)
 {
 	return ((void *)node == data);
@@ -890,6 +878,7 @@ pci_device_from_OF_node(struct device_node* node, u8* bus, u8* devfn)
 	}
 	return -ENODEV;
 }
+EXPORT_SYMBOL(pci_device_from_OF_node);
 
 void __init
 pci_process_bridge_OF_ranges(struct pci_controller *hose,
@@ -1030,6 +1019,10 @@ static ssize_t pci_show_devspec(struct device *dev, struct device_attribute *att
 }
 static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL);
 
+#else /* CONFIG_PPC_OF */
+void pcibios_make_OF_bus_map(void)
+{
+}
 #endif /* CONFIG_PPC_OF */
 
 /* Add sysfs properties */
@@ -1262,12 +1255,12 @@ pcibios_init(void)
 
 	/* Scan all of the recorded PCI controllers.  */
 	for (next_busno = 0, hose = hose_head; hose; hose = hose->next) {
-		if (pci_assign_all_busses)
+		if (pci_assign_all_buses)
 			hose->first_busno = next_busno;
 		hose->last_busno = 0xff;
 		bus = pci_scan_bus(hose->first_busno, hose->ops, hose);
 		hose->last_busno = bus->subordinate;
-		if (pci_assign_all_busses || next_busno <= hose->last_busno)
+		if (pci_assign_all_buses || next_busno <= hose->last_busno)
 			next_busno = hose->last_busno + pcibios_assign_bus_offset;
 	}
 	pci_bus_count = next_busno;
@@ -1276,7 +1269,7 @@ pcibios_init(void)
 	 * numbers vs. kernel bus numbers since we may have to
 	 * remap them.
 	 */
-	if (pci_assign_all_busses && have_of)
+	if (pci_assign_all_buses && have_of)
 		pcibios_make_OF_bus_map();
 
 	/* Do machine dependent PCI interrupt routing */
@@ -1586,16 +1579,17 @@ static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp,
  * above routine
  */
 pgprot_t pci_phys_mem_access_prot(struct file *file,
-				  unsigned long offset,
+				  unsigned long pfn,
 				  unsigned long size,
 				  pgprot_t protection)
 {
 	struct pci_dev *pdev = NULL;
 	struct resource *found = NULL;
 	unsigned long prot = pgprot_val(protection);
+	unsigned long offset = pfn << PAGE_SHIFT;
 	int i;
 
-	if (page_is_ram(offset >> PAGE_SHIFT))
+	if (page_is_ram(pfn))
 		return prot;
 
 	prot |= _PAGE_NO_CACHE | _PAGE_GUARDED;
diff --git a/arch/ppc/kernel/perfmon.c b/arch/ppc/kernel/perfmon.c
deleted file mode 100644
index fa1dad96b830..000000000000
--- a/arch/ppc/kernel/perfmon.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/* kernel/perfmon.c
- * PPC 32 Performance Monitor Infrastructure
- *
- * Author: Andy Fleming
- * Copyright (c) 2004 Freescale Semiconductor, Inc
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
-#include <linux/interrupt.h>
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/prctl.h>
-
-#include <asm/pgtable.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/reg.h>
-#include <asm/xmon.h>
-
-/* A lock to regulate grabbing the interrupt */
-DEFINE_SPINLOCK(perfmon_lock);
-
-#if defined (CONFIG_FSL_BOOKE) && !defined (CONFIG_E200)
-static void dummy_perf(struct pt_regs *regs)
-{
-	unsigned int pmgc0 = mfpmr(PMRN_PMGC0);
-
-	pmgc0 &= ~PMGC0_PMIE;
-	mtpmr(PMRN_PMGC0, pmgc0);
-}
-
-#else
-/* Ensure exceptions are disabled */
-
-static void dummy_perf(struct pt_regs *regs)
-{
-	unsigned int mmcr0 = mfspr(SPRN_MMCR0);
-
-	mmcr0 &= ~MMCR0_PMXE;
-	mtspr(SPRN_MMCR0, mmcr0);
-}
-#endif
-
-void (*perf_irq)(struct pt_regs *) = dummy_perf;
-
-/* Grab the interrupt, if it's free.
- * Returns 0 on success, -1 if the interrupt is taken already */
-int request_perfmon_irq(void (*handler)(struct pt_regs *))
-{
-	int err = 0;
-
-	spin_lock(&perfmon_lock);
-
-	if (perf_irq == dummy_perf)
-		perf_irq = handler;
-	else {
-		pr_info("perfmon irq already handled by %p\n", perf_irq);
-		err = -1;
-	}
-
-	spin_unlock(&perfmon_lock);
-
-	return err;
-}
-
-void free_perfmon_irq(void)
-{
-	spin_lock(&perfmon_lock);
-
-	perf_irq = dummy_perf;
-
-	spin_unlock(&perfmon_lock);
-}
-
-EXPORT_SYMBOL(perf_irq);
-EXPORT_SYMBOL(request_perfmon_irq);
-EXPORT_SYMBOL(free_perfmon_irq);
diff --git a/arch/ppc/kernel/perfmon_fsl_booke.c b/arch/ppc/kernel/perfmon_fsl_booke.c
index 03526bfb0840..32455dfcc36b 100644
--- a/arch/ppc/kernel/perfmon_fsl_booke.c
+++ b/arch/ppc/kernel/perfmon_fsl_booke.c
@@ -32,7 +32,7 @@
 #include <asm/io.h>
 #include <asm/reg.h>
 #include <asm/xmon.h>
-#include <asm/perfmon.h>
+#include <asm/pmc.h>
 
 static inline u32 get_pmlca(int ctr);
 static inline void set_pmlca(int ctr, u32 pmlca);
diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c
index 88f6bb7b6964..bb6a5c6a64be 100644
--- a/arch/ppc/kernel/ppc_ksyms.c
+++ b/arch/ppc/kernel/ppc_ksyms.c
@@ -46,6 +46,7 @@
 #include <asm/btext.h>
 #include <asm/div64.h>
 #include <asm/xmon.h>
+#include <asm/signal.h>
 
 #ifdef  CONFIG_8xx
 #include <asm/commproc.h>
@@ -53,11 +54,10 @@
 
 extern void transfer_to_handler(void);
 extern void do_IRQ(struct pt_regs *regs);
-extern void MachineCheckException(struct pt_regs *regs);
-extern void AlignmentException(struct pt_regs *regs);
-extern void ProgramCheckException(struct pt_regs *regs);
-extern void SingleStepException(struct pt_regs *regs);
-extern int do_signal(sigset_t *, struct pt_regs *);
+extern void machine_check_exception(struct pt_regs *regs);
+extern void alignment_exception(struct pt_regs *regs);
+extern void program_check_exception(struct pt_regs *regs);
+extern void single_step_exception(struct pt_regs *regs);
 extern int pmac_newworld;
 extern int sys_sigreturn(struct pt_regs *regs);
 
@@ -72,13 +72,12 @@ EXPORT_SYMBOL(clear_user_page);
 EXPORT_SYMBOL(do_signal);
 EXPORT_SYMBOL(transfer_to_handler);
 EXPORT_SYMBOL(do_IRQ);
-EXPORT_SYMBOL(MachineCheckException);
-EXPORT_SYMBOL(AlignmentException);
-EXPORT_SYMBOL(ProgramCheckException);
-EXPORT_SYMBOL(SingleStepException);
+EXPORT_SYMBOL(machine_check_exception);
+EXPORT_SYMBOL(alignment_exception);
+EXPORT_SYMBOL(program_check_exception);
+EXPORT_SYMBOL(single_step_exception);
 EXPORT_SYMBOL(sys_sigreturn);
 EXPORT_SYMBOL(ppc_n_lost_interrupts);
-EXPORT_SYMBOL(ppc_lost_interrupts);
 
 EXPORT_SYMBOL(ISA_DMA_THRESHOLD);
 EXPORT_SYMBOL(DMA_MODE_READ);
@@ -131,6 +130,11 @@ EXPORT_SYMBOL(outw);
 EXPORT_SYMBOL(outl);
 EXPORT_SYMBOL(outsl);*/
 
+EXPORT_SYMBOL(__ide_mm_insl);
+EXPORT_SYMBOL(__ide_mm_outsw);
+EXPORT_SYMBOL(__ide_mm_insw);
+EXPORT_SYMBOL(__ide_mm_outsl);
+
 EXPORT_SYMBOL(_insb);
 EXPORT_SYMBOL(_outsb);
 EXPORT_SYMBOL(_insw);
@@ -171,6 +175,7 @@ EXPORT_SYMBOL(pci_bus_to_phys);
 #endif /* CONFIG_PCI */
 
 #ifdef CONFIG_NOT_COHERENT_CACHE
+extern void flush_dcache_all(void);
 EXPORT_SYMBOL(flush_dcache_all);
 #endif
 
@@ -179,7 +184,7 @@ EXPORT_SYMBOL(kernel_thread);
 
 EXPORT_SYMBOL(flush_instruction_cache);
 EXPORT_SYMBOL(giveup_fpu);
-EXPORT_SYMBOL(flush_icache_range);
+EXPORT_SYMBOL(__flush_icache_range);
 EXPORT_SYMBOL(flush_dcache_range);
 EXPORT_SYMBOL(flush_icache_user_range);
 EXPORT_SYMBOL(flush_dcache_page);
@@ -212,9 +217,6 @@ EXPORT_SYMBOL(adb_try_handler_change);
 EXPORT_SYMBOL(cuda_request);
 EXPORT_SYMBOL(cuda_poll);
 #endif /* CONFIG_ADB_CUDA */
-#ifdef CONFIG_PPC_MULTIPLATFORM
-EXPORT_SYMBOL(_machine);
-#endif
 #ifdef CONFIG_PPC_PMAC
 EXPORT_SYMBOL(sys_ctrler);
 EXPORT_SYMBOL(pmac_newworld);
@@ -230,9 +232,6 @@ EXPORT_SYMBOL(find_all_nodes);
 EXPORT_SYMBOL(get_property);
 EXPORT_SYMBOL(request_OF_resource);
 EXPORT_SYMBOL(release_OF_resource);
-EXPORT_SYMBOL(pci_busdev_to_OF_node);
-EXPORT_SYMBOL(pci_device_to_OF_node);
-EXPORT_SYMBOL(pci_device_from_OF_node);
 EXPORT_SYMBOL(of_find_node_by_name);
 EXPORT_SYMBOL(of_find_node_by_type);
 EXPORT_SYMBOL(of_find_compatible_node);
@@ -272,16 +271,6 @@ EXPORT_SYMBOL(screen_info);
 #endif
 
 EXPORT_SYMBOL(__delay);
-#ifndef INLINE_IRQS
-EXPORT_SYMBOL(local_irq_enable);
-EXPORT_SYMBOL(local_irq_enable_end);
-EXPORT_SYMBOL(local_irq_disable);
-EXPORT_SYMBOL(local_irq_disable_end);
-EXPORT_SYMBOL(local_save_flags_ptr);
-EXPORT_SYMBOL(local_save_flags_ptr_end);
-EXPORT_SYMBOL(local_irq_restore);
-EXPORT_SYMBOL(local_irq_restore_end);
-#endif
 EXPORT_SYMBOL(timer_interrupt);
 EXPORT_SYMBOL(irq_desc);
 EXPORT_SYMBOL(tb_ticks_per_jiffy);
@@ -335,11 +324,6 @@ EXPORT_SYMBOL(mmu_hash_lock); /* For MOL */
 extern long *intercept_table;
 EXPORT_SYMBOL(intercept_table);
 #endif /* CONFIG_PPC_STD_MMU */
-EXPORT_SYMBOL(cur_cpu_spec);
-#ifdef CONFIG_PPC_PMAC
-extern unsigned long agp_special_page;
-EXPORT_SYMBOL(agp_special_page);
-#endif
 #if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
 EXPORT_SYMBOL(__mtdcr);
 EXPORT_SYMBOL(__mfdcr);
diff --git a/arch/ppc/kernel/process.c b/arch/ppc/kernel/process.c
index 82de66e4db6d..25cbdc8d2941 100644
--- a/arch/ppc/kernel/process.c
+++ b/arch/ppc/kernel/process.c
@@ -152,18 +152,66 @@ int check_stack(struct task_struct *tsk)
 }
 #endif /* defined(CHECK_STACK) */
 
-#ifdef CONFIG_ALTIVEC
-int
-dump_altivec(struct pt_regs *regs, elf_vrregset_t *vrregs)
+/*
+ * Make sure the floating-point register state in the
+ * the thread_struct is up to date for task tsk.
+ */
+void flush_fp_to_thread(struct task_struct *tsk)
 {
-	if (regs->msr & MSR_VEC)
-		giveup_altivec(current);
-	memcpy(vrregs, &current->thread.vr[0], sizeof(*vrregs));
+	if (tsk->thread.regs) {
+		/*
+		 * We need to disable preemption here because if we didn't,
+		 * another process could get scheduled after the regs->msr
+		 * test but before we have finished saving the FP registers
+		 * to the thread_struct.  That process could take over the
+		 * FPU, and then when we get scheduled again we would store
+		 * bogus values for the remaining FP registers.
+		 */
+		preempt_disable();
+		if (tsk->thread.regs->msr & MSR_FP) {
+#ifdef CONFIG_SMP
+			/*
+			 * This should only ever be called for current or
+			 * for a stopped child process.  Since we save away
+			 * the FP register state on context switch on SMP,
+			 * there is something wrong if a stopped child appears
+			 * to still have its FP state in the CPU registers.
+			 */
+			BUG_ON(tsk != current);
+#endif
+			giveup_fpu(current);
+		}
+		preempt_enable();
+	}
+}
+
+void enable_kernel_fp(void)
+{
+	WARN_ON(preemptible());
+
+#ifdef CONFIG_SMP
+	if (current->thread.regs && (current->thread.regs->msr & MSR_FP))
+		giveup_fpu(current);
+	else
+		giveup_fpu(NULL);	/* just enables FP for kernel */
+#else
+	giveup_fpu(last_task_used_math);
+#endif /* CONFIG_SMP */
+}
+EXPORT_SYMBOL(enable_kernel_fp);
+
+int dump_task_fpu(struct task_struct *tsk, elf_fpregset_t *fpregs)
+{
+	preempt_disable();
+	if (tsk->thread.regs && (tsk->thread.regs->msr & MSR_FP))
+		giveup_fpu(tsk);
+	preempt_enable();
+	memcpy(fpregs, &tsk->thread.fpr[0], sizeof(*fpregs));
 	return 1;
 }
 
-void
-enable_kernel_altivec(void)
+#ifdef CONFIG_ALTIVEC
+void enable_kernel_altivec(void)
 {
 	WARN_ON(preemptible());
 
@@ -177,19 +225,35 @@ enable_kernel_altivec(void)
 #endif /* __SMP __ */
 }
 EXPORT_SYMBOL(enable_kernel_altivec);
-#endif /* CONFIG_ALTIVEC */
 
-#ifdef CONFIG_SPE
-int
-dump_spe(struct pt_regs *regs, elf_vrregset_t *evrregs)
+/*
+ * Make sure the VMX/Altivec register state in the
+ * the thread_struct is up to date for task tsk.
+ */
+void flush_altivec_to_thread(struct task_struct *tsk)
 {
-	if (regs->msr & MSR_SPE)
-		giveup_spe(current);
-	/* We copy u32 evr[32] + u64 acc + u32 spefscr -> 35 */
-	memcpy(evrregs, &current->thread.evr[0], sizeof(u32) * 35);
+	if (tsk->thread.regs) {
+		preempt_disable();
+		if (tsk->thread.regs->msr & MSR_VEC) {
+#ifdef CONFIG_SMP
+			BUG_ON(tsk != current);
+#endif
+			giveup_altivec(current);
+		}
+		preempt_enable();
+	}
+}
+
+int dump_altivec(struct pt_regs *regs, elf_vrregset_t *vrregs)
+{
+	if (regs->msr & MSR_VEC)
+		giveup_altivec(current);
+	memcpy(vrregs, &current->thread.vr[0], sizeof(*vrregs));
 	return 1;
 }
+#endif /* CONFIG_ALTIVEC */
 
+#ifdef CONFIG_SPE
 void
 enable_kernel_spe(void)
 {
@@ -205,34 +269,30 @@ enable_kernel_spe(void)
 #endif /* __SMP __ */
 }
 EXPORT_SYMBOL(enable_kernel_spe);
-#endif /* CONFIG_SPE */
 
-void
-enable_kernel_fp(void)
+void flush_spe_to_thread(struct task_struct *tsk)
 {
-	WARN_ON(preemptible());
-
+	if (tsk->thread.regs) {
+		preempt_disable();
+		if (tsk->thread.regs->msr & MSR_SPE) {
 #ifdef CONFIG_SMP
-	if (current->thread.regs && (current->thread.regs->msr & MSR_FP))
-		giveup_fpu(current);
-	else
-		giveup_fpu(NULL);	/* just enables FP for kernel */
-#else
-	giveup_fpu(last_task_used_math);
-#endif /* CONFIG_SMP */
+			BUG_ON(tsk != current);
+#endif
+			giveup_spe(current);
+		}
+		preempt_enable();
+	}
 }
-EXPORT_SYMBOL(enable_kernel_fp);
 
-int
-dump_task_fpu(struct task_struct *tsk, elf_fpregset_t *fpregs)
+int dump_spe(struct pt_regs *regs, elf_vrregset_t *evrregs)
 {
-	preempt_disable();
-	if (tsk->thread.regs && (tsk->thread.regs->msr & MSR_FP))
-		giveup_fpu(tsk);
-	preempt_enable();
-	memcpy(fpregs, &tsk->thread.fpr[0], sizeof(*fpregs));
+	if (regs->msr & MSR_SPE)
+		giveup_spe(current);
+	/* We copy u32 evr[32] + u64 acc + u32 spefscr -> 35 */
+	memcpy(evrregs, &current->thread.evr[0], sizeof(u32) * 35);
 	return 1;
 }
+#endif /* CONFIG_SPE */
 
 struct task_struct *__switch_to(struct task_struct *prev,
 	struct task_struct *new)
@@ -287,11 +347,13 @@ struct task_struct *__switch_to(struct task_struct *prev,
 #endif /* CONFIG_SPE */
 #endif /* CONFIG_SMP */
 
+#ifdef CONFIG_ALTIVEC
 	/* Avoid the trap.  On smp this this never happens since
 	 * we don't set last_task_used_altivec -- Cort
 	 */
 	if (new->thread.regs && last_task_used_altivec == new)
 		new->thread.regs->msr |= MSR_VEC;
+#endif
 #ifdef CONFIG_SPE
 	/* Avoid the trap.  On smp this this never happens since
 	 * we don't set last_task_used_spe
@@ -355,6 +417,7 @@ void show_regs(struct pt_regs * regs)
 
 void exit_thread(void)
 {
+	preempt_disable();
 	if (last_task_used_math == current)
 		last_task_used_math = NULL;
 	if (last_task_used_altivec == current)
@@ -363,10 +426,12 @@ void exit_thread(void)
 	if (last_task_used_spe == current)
 		last_task_used_spe = NULL;
 #endif
+	preempt_enable();
 }
 
 void flush_thread(void)
 {
+	preempt_disable();
 	if (last_task_used_math == current)
 		last_task_used_math = NULL;
 	if (last_task_used_altivec == current)
@@ -375,6 +440,7 @@ void flush_thread(void)
 	if (last_task_used_spe == current)
 		last_task_used_spe = NULL;
 #endif
+	preempt_enable();
 }
 
 void
@@ -473,6 +539,7 @@ void start_thread(struct pt_regs *regs, unsigned long nip, unsigned long sp)
 	regs->nip = nip;
 	regs->gpr[1] = sp;
 	regs->msr = MSR_USER;
+	preempt_disable();
 	if (last_task_used_math == current)
 		last_task_used_math = NULL;
 	if (last_task_used_altivec == current)
@@ -481,8 +548,9 @@ void start_thread(struct pt_regs *regs, unsigned long nip, unsigned long sp)
 	if (last_task_used_spe == current)
 		last_task_used_spe = NULL;
 #endif
+	preempt_enable();
 	memset(current->thread.fpr, 0, sizeof(current->thread.fpr));
-	current->thread.fpscr = 0;
+	current->thread.fpscr.val = 0;
 #ifdef CONFIG_ALTIVEC
 	memset(current->thread.vr, 0, sizeof(current->thread.vr));
 	memset(&current->thread.vscr, 0, sizeof(current->thread.vscr));
@@ -557,14 +625,16 @@ int sys_clone(unsigned long clone_flags, unsigned long usp,
  	return do_fork(clone_flags, usp, regs, 0, parent_tidp, child_tidp);
 }
 
-int sys_fork(int p1, int p2, int p3, int p4, int p5, int p6,
+int sys_fork(unsigned long p1, unsigned long p2, unsigned long p3,
+	     unsigned long p4, unsigned long p5, unsigned long p6,
 	     struct pt_regs *regs)
 {
 	CHECK_FULL_REGS(regs);
 	return do_fork(SIGCHLD, regs->gpr[1], regs, 0, NULL, NULL);
 }
 
-int sys_vfork(int p1, int p2, int p3, int p4, int p5, int p6,
+int sys_vfork(unsigned long p1, unsigned long p2, unsigned long p3,
+	      unsigned long p4, unsigned long p5, unsigned long p6,
 	      struct pt_regs *regs)
 {
 	CHECK_FULL_REGS(regs);
diff --git a/arch/ppc/kernel/rio.c b/arch/ppc/kernel/rio.c
new file mode 100644
index 000000000000..29487fedfc76
--- /dev/null
+++ b/arch/ppc/kernel/rio.c
@@ -0,0 +1,52 @@
+/*
+ * RapidIO PPC32 support
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/rio.h>
+
+#include <asm/rio.h>
+
+/**
+ * platform_rio_init - Do platform specific RIO init
+ *
+ * Any platform specific initialization of RapdIO
+ * hardware is done here as well as registration
+ * of any active master ports in the system.
+ */
+void __attribute__ ((weak))
+    platform_rio_init(void)
+{
+	printk(KERN_WARNING "RIO: No platform_rio_init() present\n");
+}
+
+/**
+ * ppc_rio_init - Do PPC32 RIO init
+ *
+ * Calls platform-specific RIO init code and then calls
+ * rio_init_mports() to initialize any master ports that
+ * have been registered with the RIO subsystem.
+ */
+static int __init ppc_rio_init(void)
+{
+	printk(KERN_INFO "RIO: RapidIO init\n");
+
+	/* Platform specific initialization */
+	platform_rio_init();
+
+	/* Enumerate all registered ports */
+	rio_init_mports();
+
+	return 0;
+}
+
+subsys_initcall(ppc_rio_init);
diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c
index 545cfd0fab59..0eb0b7085e6a 100644
--- a/arch/ppc/kernel/setup.c
+++ b/arch/ppc/kernel/setup.c
@@ -71,10 +71,12 @@ struct ide_machdep_calls ppc_ide_md;
 unsigned long boot_mem_size;
 
 unsigned long ISA_DMA_THRESHOLD;
-unsigned long DMA_MODE_READ, DMA_MODE_WRITE;
+unsigned int DMA_MODE_READ;
+unsigned int DMA_MODE_WRITE;
 
 #ifdef CONFIG_PPC_MULTIPLATFORM
 int _machine = 0;
+EXPORT_SYMBOL(_machine);
 
 extern void prep_init(unsigned long r3, unsigned long r4,
 		unsigned long r5, unsigned long r6, unsigned long r7);
@@ -82,8 +84,18 @@ extern void pmac_init(unsigned long r3, unsigned long r4,
 		unsigned long r5, unsigned long r6, unsigned long r7);
 extern void chrp_init(unsigned long r3, unsigned long r4,
 		unsigned long r5, unsigned long r6, unsigned long r7);
+
+dev_t boot_dev;
 #endif /* CONFIG_PPC_MULTIPLATFORM */
 
+int have_of;
+EXPORT_SYMBOL(have_of);
+
+#ifdef __DO_IRQ_CANON
+int ppc_do_canonicalize_irqs;
+EXPORT_SYMBOL(ppc_do_canonicalize_irqs);
+#endif
+
 #ifdef CONFIG_MAGIC_SYSRQ
 unsigned long SYSRQ_KEY = 0x54;
 #endif /* CONFIG_MAGIC_SYSRQ */
@@ -185,18 +197,18 @@ int show_cpuinfo(struct seq_file *m, void *v)
 	seq_printf(m, "processor\t: %d\n", i);
 	seq_printf(m, "cpu\t\t: ");
 
-	if (cur_cpu_spec[i]->pvr_mask)
-		seq_printf(m, "%s", cur_cpu_spec[i]->cpu_name);
+	if (cur_cpu_spec->pvr_mask)
+		seq_printf(m, "%s", cur_cpu_spec->cpu_name);
 	else
 		seq_printf(m, "unknown (%08x)", pvr);
 #ifdef CONFIG_ALTIVEC
-	if (cur_cpu_spec[i]->cpu_features & CPU_FTR_ALTIVEC)
+	if (cur_cpu_spec->cpu_features & CPU_FTR_ALTIVEC)
 		seq_printf(m, ", altivec supported");
 #endif
 	seq_printf(m, "\n");
 
 #ifdef CONFIG_TAU
-	if (cur_cpu_spec[i]->cpu_features & CPU_FTR_TAU) {
+	if (cur_cpu_spec->cpu_features & CPU_FTR_TAU) {
 #ifdef CONFIG_TAU_AVERAGE
 		/* more straightforward, but potentially misleading */
 		seq_printf(m,  "temperature \t: %u C (uncalibrated)\n",
@@ -339,7 +351,7 @@ early_init(int r3, int r4, int r5)
  * Assume here that all clock rates are the same in a
  * smp system.  -- Cort
  */
-int __openfirmware
+int
 of_show_percpuinfo(struct seq_file *m, int i)
 {
 	struct device_node *cpu_node;
@@ -404,11 +416,15 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 			_machine = _MACH_prep;
 	}
 
+#ifdef CONFIG_PPC_PREP
 	/* not much more to do here, if prep */
 	if (_machine == _MACH_prep) {
 		prep_init(r3, r4, r5, r6, r7);
 		return;
 	}
+#endif
+
+	have_of = 1;
 
 	/* prom_init has already been called from __start */
 	if (boot_infos)
@@ -479,12 +495,16 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 #endif /* CONFIG_ADB */
 
 	switch (_machine) {
+#ifdef CONFIG_PPC_PMAC
 	case _MACH_Pmac:
 		pmac_init(r3, r4, r5, r6, r7);
 		break;
+#endif
+#ifdef CONFIG_PPC_CHRP
 	case _MACH_chrp:
 		chrp_init(r3, r4, r5, r6, r7);
 		break;
+#endif
 	}
 }
 
@@ -582,7 +602,19 @@ void parse_bootinfo(struct bi_record *rec)
 #endif /* CONFIG_BLK_DEV_INITRD */
 #ifdef CONFIG_PPC_MULTIPLATFORM
 		case BI_MACHTYPE:
-			_machine = data[0];
+			/* Machine types changed with the merge. Since the
+			 * bootinfo are now deprecated, we can just hard code
+			 * the appropriate conversion here for when we are
+			 * called with yaboot which passes us a machine type
+			 * this way.
+			 */
+			switch(data[0]) {
+			case 1: _machine = _MACH_prep; break;
+			case 2: _machine = _MACH_Pmac; break;
+			case 4: _machine = _MACH_chrp; break;
+			default:
+				_machine = data[0];
+			}
 			break;
 #endif
 		case BI_MEMSIZE:
@@ -721,7 +753,7 @@ void __init setup_arch(char **cmdline_p)
 #endif
 
 #ifdef CONFIG_XMON
-	xmon_map_scc();
+	xmon_init(1);
 	if (strstr(cmd_line, "xmon"))
 		xmon(NULL);
 #endif /* CONFIG_XMON */
@@ -745,12 +777,12 @@ void __init setup_arch(char **cmdline_p)
 	 * for a possibly more accurate value.
 	 */
 	if (cpu_has_feature(CPU_FTR_SPLIT_ID_CACHE)) {
-		dcache_bsize = cur_cpu_spec[0]->dcache_bsize;
-		icache_bsize = cur_cpu_spec[0]->icache_bsize;
+		dcache_bsize = cur_cpu_spec->dcache_bsize;
+		icache_bsize = cur_cpu_spec->icache_bsize;
 		ucache_bsize = 0;
 	} else
 		ucache_bsize = dcache_bsize = icache_bsize
-			= cur_cpu_spec[0]->dcache_bsize;
+			= cur_cpu_spec->dcache_bsize;
 
 	/* reboot on panic */
 	panic_timeout = 180;
diff --git a/arch/ppc/kernel/signal.c b/arch/ppc/kernel/signal.c
deleted file mode 100644
index 2244bf91e593..000000000000
--- a/arch/ppc/kernel/signal.c
+++ /dev/null
@@ -1,771 +0,0 @@
-/*
- *  arch/ppc/kernel/signal.c
- *
- *  PowerPC version
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Derived from "arch/i386/kernel/signal.c"
- *    Copyright (C) 1991, 1992 Linus Torvalds
- *    1997-11-28  Modified for POSIX.1b signals by Richard Henderson
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/errno.h>
-#include <linux/wait.h>
-#include <linux/ptrace.h>
-#include <linux/unistd.h>
-#include <linux/stddef.h>
-#include <linux/elf.h>
-#include <linux/tty.h>
-#include <linux/binfmts.h>
-#include <linux/suspend.h>
-#include <asm/ucontext.h>
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
-#include <asm/cacheflush.h>
-
-#undef DEBUG_SIG
-
-#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-
-extern void sigreturn_exit(struct pt_regs *);
-
-#define GP_REGS_SIZE	min(sizeof(elf_gregset_t), sizeof(struct pt_regs))
-
-int do_signal(sigset_t *oldset, struct pt_regs *regs);
-
-/*
- * Atomically swap in the new signal mask, and wait for a signal.
- */
-int
-sys_sigsuspend(old_sigset_t mask, int p2, int p3, int p4, int p6, int p7,
-	       struct pt_regs *regs)
-{
-	sigset_t saveset;
-
-	mask &= _BLOCKABLE;
-	spin_lock_irq(&current->sighand->siglock);
-	saveset = current->blocked;
-	siginitset(&current->blocked, mask);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	regs->result = -EINTR;
-	regs->gpr[3] = EINTR;
-	regs->ccr |= 0x10000000;
-	while (1) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		if (do_signal(&saveset, regs))
-			sigreturn_exit(regs);
-	}
-}
-
-int
-sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize, int p3, int p4,
-		  int p6, int p7, struct pt_regs *regs)
-{
-	sigset_t saveset, newset;
-
-	/* XXX: Don't preclude handling different sized sigset_t's.  */
-	if (sigsetsize != sizeof(sigset_t))
-		return -EINVAL;
-
-	if (copy_from_user(&newset, unewset, sizeof(newset)))
-		return -EFAULT;
-	sigdelsetmask(&newset, ~_BLOCKABLE);
-
-	spin_lock_irq(&current->sighand->siglock);
-	saveset = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	regs->result = -EINTR;
-	regs->gpr[3] = EINTR;
-	regs->ccr |= 0x10000000;
-	while (1) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		if (do_signal(&saveset, regs))
-			sigreturn_exit(regs);
-	}
-}
-
-
-int
-sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, int r5,
-		int r6, int r7, int r8, struct pt_regs *regs)
-{
-	return do_sigaltstack(uss, uoss, regs->gpr[1]);
-}
-
-int
-sys_sigaction(int sig, const struct old_sigaction __user *act,
-	      struct old_sigaction __user *oact)
-{
-	struct k_sigaction new_ka, old_ka;
-	int ret;
-
-	if (act) {
-		old_sigset_t mask;
-		if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
-		    __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
-		    __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
-			return -EFAULT;
-		__get_user(new_ka.sa.sa_flags, &act->sa_flags);
-		__get_user(mask, &act->sa_mask);
-		siginitset(&new_ka.sa.sa_mask, mask);
-	}
-
-	ret = do_sigaction(sig, (act? &new_ka: NULL), (oact? &old_ka: NULL));
-
-	if (!ret && oact) {
-		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
-		    __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
-		    __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
-			return -EFAULT;
-		__put_user(old_ka.sa.sa_flags, &oact->sa_flags);
-		__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
-	}
-
-	return ret;
-}
-
-/*
- * When we have signals to deliver, we set up on the
- * user stack, going down from the original stack pointer:
- *	a sigregs struct
- *	a sigcontext struct
- *	a gap of __SIGNAL_FRAMESIZE bytes
- *
- * Each of these things must be a multiple of 16 bytes in size.
- *
- */
-struct sigregs {
-	struct mcontext	mctx;		/* all the register values */
-	/* Programs using the rs6000/xcoff abi can save up to 19 gp regs
-	   and 18 fp regs below sp before decrementing it. */
-	int		abigap[56];
-};
-
-/* We use the mc_pad field for the signal return trampoline. */
-#define tramp	mc_pad
-
-/*
- *  When we have rt signals to deliver, we set up on the
- *  user stack, going down from the original stack pointer:
- *	one rt_sigframe struct (siginfo + ucontext + ABI gap)
- *	a gap of __SIGNAL_FRAMESIZE+16 bytes
- *  (the +16 is to get the siginfo and ucontext in the same
- *  positions as in older kernels).
- *
- *  Each of these things must be a multiple of 16 bytes in size.
- *
- */
-struct rt_sigframe
-{
-	struct siginfo info;
-	struct ucontext uc;
-	/* Programs using the rs6000/xcoff abi can save up to 19 gp regs
-	   and 18 fp regs below sp before decrementing it. */
-	int		abigap[56];
-};
-
-/*
- * Save the current user registers on the user stack.
- * We only save the altivec/spe registers if the process has used
- * altivec/spe instructions at some point.
- */
-static int
-save_user_regs(struct pt_regs *regs, struct mcontext __user *frame, int sigret)
-{
-	/* save general and floating-point registers */
-	CHECK_FULL_REGS(regs);
-	preempt_disable();
-	if (regs->msr & MSR_FP)
-		giveup_fpu(current);
-#ifdef CONFIG_ALTIVEC
-	if (current->thread.used_vr && (regs->msr & MSR_VEC))
-		giveup_altivec(current);
-#endif /* CONFIG_ALTIVEC */
-#ifdef CONFIG_SPE
-	if (current->thread.used_spe && (regs->msr & MSR_SPE))
-		giveup_spe(current);
-#endif /* CONFIG_ALTIVEC */
-	preempt_enable();
-
-	if (__copy_to_user(&frame->mc_gregs, regs, GP_REGS_SIZE)
-	    || __copy_to_user(&frame->mc_fregs, current->thread.fpr,
-			      ELF_NFPREG * sizeof(double)))
-		return 1;
-
-	current->thread.fpscr = 0;	/* turn off all fp exceptions */
-
-#ifdef CONFIG_ALTIVEC
-	/* save altivec registers */
-	if (current->thread.used_vr) {
-		if (__copy_to_user(&frame->mc_vregs, current->thread.vr,
-				   ELF_NVRREG * sizeof(vector128)))
-			return 1;
-		/* set MSR_VEC in the saved MSR value to indicate that
-		   frame->mc_vregs contains valid data */
-		if (__put_user(regs->msr | MSR_VEC, &frame->mc_gregs[PT_MSR]))
-			return 1;
-	}
-	/* else assert((regs->msr & MSR_VEC) == 0) */
-
-	/* We always copy to/from vrsave, it's 0 if we don't have or don't
-	 * use altivec. Since VSCR only contains 32 bits saved in the least
-	 * significant bits of a vector, we "cheat" and stuff VRSAVE in the
-	 * most significant bits of that same vector. --BenH
-	 */
-	if (__put_user(current->thread.vrsave, (u32 __user *)&frame->mc_vregs[32]))
-		return 1;
-#endif /* CONFIG_ALTIVEC */
-
-#ifdef CONFIG_SPE
-	/* save spe registers */
-	if (current->thread.used_spe) {
-		if (__copy_to_user(&frame->mc_vregs, current->thread.evr,
-				   ELF_NEVRREG * sizeof(u32)))
-			return 1;
-		/* set MSR_SPE in the saved MSR value to indicate that
-		   frame->mc_vregs contains valid data */
-		if (__put_user(regs->msr | MSR_SPE, &frame->mc_gregs[PT_MSR]))
-			return 1;
-	}
-	/* else assert((regs->msr & MSR_SPE) == 0) */
-
-	/* We always copy to/from spefscr */
-	if (__put_user(current->thread.spefscr, (u32 *)&frame->mc_vregs + ELF_NEVRREG))
-		return 1;
-#endif /* CONFIG_SPE */
-
-	if (sigret) {
-		/* Set up the sigreturn trampoline: li r0,sigret; sc */
-		if (__put_user(0x38000000UL + sigret, &frame->tramp[0])
-		    || __put_user(0x44000002UL, &frame->tramp[1]))
-			return 1;
-		flush_icache_range((unsigned long) &frame->tramp[0],
-				   (unsigned long) &frame->tramp[2]);
-	}
-
-	return 0;
-}
-
-/*
- * Restore the current user register values from the user stack,
- * (except for MSR).
- */
-static int
-restore_user_regs(struct pt_regs *regs, struct mcontext __user *sr, int sig)
-{
-	unsigned long save_r2 = 0;
-#if defined(CONFIG_ALTIVEC) || defined(CONFIG_SPE)
-	unsigned long msr;
-#endif
-
-	/* backup/restore the TLS as we don't want it to be modified */
-	if (!sig)
-		save_r2 = regs->gpr[2];
-	/* copy up to but not including MSR */
-	if (__copy_from_user(regs, &sr->mc_gregs, PT_MSR * sizeof(elf_greg_t)))
-		return 1;
-	/* copy from orig_r3 (the word after the MSR) up to the end */
-	if (__copy_from_user(&regs->orig_gpr3, &sr->mc_gregs[PT_ORIG_R3],
-			     GP_REGS_SIZE - PT_ORIG_R3 * sizeof(elf_greg_t)))
-		return 1;
-	if (!sig)
-		regs->gpr[2] = save_r2;
-
-	/* force the process to reload the FP registers from
-	   current->thread when it next does FP instructions */
-	regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1);
-	if (__copy_from_user(current->thread.fpr, &sr->mc_fregs,
-			     sizeof(sr->mc_fregs)))
-		return 1;
-
-#ifdef CONFIG_ALTIVEC
-	/* force the process to reload the altivec registers from
-	   current->thread when it next does altivec instructions */
-	regs->msr &= ~MSR_VEC;
-	if (!__get_user(msr, &sr->mc_gregs[PT_MSR]) && (msr & MSR_VEC) != 0) {
-		/* restore altivec registers from the stack */
-		if (__copy_from_user(current->thread.vr, &sr->mc_vregs,
-				     sizeof(sr->mc_vregs)))
-			return 1;
-	} else if (current->thread.used_vr)
-		memset(&current->thread.vr, 0, ELF_NVRREG * sizeof(vector128));
-
-	/* Always get VRSAVE back */
-	if (__get_user(current->thread.vrsave, (u32 __user *)&sr->mc_vregs[32]))
-		return 1;
-#endif /* CONFIG_ALTIVEC */
-
-#ifdef CONFIG_SPE
-	/* force the process to reload the spe registers from
-	   current->thread when it next does spe instructions */
-	regs->msr &= ~MSR_SPE;
-	if (!__get_user(msr, &sr->mc_gregs[PT_MSR]) && (msr & MSR_SPE) != 0) {
-		/* restore spe registers from the stack */
-		if (__copy_from_user(current->thread.evr, &sr->mc_vregs,
-				     ELF_NEVRREG * sizeof(u32)))
-			return 1;
-	} else if (current->thread.used_spe)
-		memset(&current->thread.evr, 0, ELF_NEVRREG * sizeof(u32));
-
-	/* Always get SPEFSCR back */
-	if (__get_user(current->thread.spefscr, (u32 *)&sr->mc_vregs + ELF_NEVRREG))
-		return 1;
-#endif /* CONFIG_SPE */
-
-#ifndef CONFIG_SMP
-	preempt_disable();
-	if (last_task_used_math == current)
-		last_task_used_math = NULL;
-	if (last_task_used_altivec == current)
-		last_task_used_altivec = NULL;
-	if (last_task_used_spe == current)
-		last_task_used_spe = NULL;
-	preempt_enable();
-#endif
-	return 0;
-}
-
-/*
- * Restore the user process's signal mask
- */
-static void
-restore_sigmask(sigset_t *set)
-{
-	sigdelsetmask(set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = *set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-}
-
-/*
- * Set up a signal frame for a "real-time" signal handler
- * (one which gets siginfo).
- */
-static void
-handle_rt_signal(unsigned long sig, struct k_sigaction *ka,
-		 siginfo_t *info, sigset_t *oldset, struct pt_regs * regs,
-		 unsigned long newsp)
-{
-	struct rt_sigframe __user *rt_sf;
-	struct mcontext __user *frame;
-	unsigned long origsp = newsp;
-
-	/* Set up Signal Frame */
-	/* Put a Real Time Context onto stack */
-	newsp -= sizeof(*rt_sf);
-	rt_sf = (struct rt_sigframe __user *) newsp;
-
-	/* create a stack frame for the caller of the handler */
-	newsp -= __SIGNAL_FRAMESIZE + 16;
-
-	if (!access_ok(VERIFY_WRITE, (void __user *) newsp, origsp - newsp))
-		goto badframe;
-
-	/* Put the siginfo & fill in most of the ucontext */
-	if (copy_siginfo_to_user(&rt_sf->info, info)
-	    || __put_user(0, &rt_sf->uc.uc_flags)
-	    || __put_user(0, &rt_sf->uc.uc_link)
-	    || __put_user(current->sas_ss_sp, &rt_sf->uc.uc_stack.ss_sp)
-	    || __put_user(sas_ss_flags(regs->gpr[1]),
-			  &rt_sf->uc.uc_stack.ss_flags)
-	    || __put_user(current->sas_ss_size, &rt_sf->uc.uc_stack.ss_size)
-	    || __put_user(&rt_sf->uc.uc_mcontext, &rt_sf->uc.uc_regs)
-	    || __copy_to_user(&rt_sf->uc.uc_sigmask, oldset, sizeof(*oldset)))
-		goto badframe;
-
-	/* Save user registers on the stack */
-	frame = &rt_sf->uc.uc_mcontext;
-	if (save_user_regs(regs, frame, __NR_rt_sigreturn))
-		goto badframe;
-
-	if (put_user(regs->gpr[1], (unsigned long __user *)newsp))
-		goto badframe;
-	regs->gpr[1] = newsp;
-	regs->gpr[3] = sig;
-	regs->gpr[4] = (unsigned long) &rt_sf->info;
-	regs->gpr[5] = (unsigned long) &rt_sf->uc;
-	regs->gpr[6] = (unsigned long) rt_sf;
-	regs->nip = (unsigned long) ka->sa.sa_handler;
-	regs->link = (unsigned long) frame->tramp;
-	regs->trap = 0;
-
-	return;
-
-badframe:
-#ifdef DEBUG_SIG
-	printk("badframe in handle_rt_signal, regs=%p frame=%p newsp=%lx\n",
-	       regs, frame, newsp);
-#endif
-	force_sigsegv(sig, current);
-}
-
-static int do_setcontext(struct ucontext __user *ucp, struct pt_regs *regs, int sig)
-{
-	sigset_t set;
-	struct mcontext __user *mcp;
-
-	if (__copy_from_user(&set, &ucp->uc_sigmask, sizeof(set))
-	    || __get_user(mcp, &ucp->uc_regs))
-		return -EFAULT;
-	restore_sigmask(&set);
-	if (restore_user_regs(regs, mcp, sig))
-		return -EFAULT;
-
-	return 0;
-}
-
-int sys_swapcontext(struct ucontext __user *old_ctx,
-		    struct ucontext __user *new_ctx,
-		    int ctx_size, int r6, int r7, int r8, struct pt_regs *regs)
-{
-	unsigned char tmp;
-
-	/* Context size is for future use. Right now, we only make sure
-	 * we are passed something we understand
-	 */
-	if (ctx_size < sizeof(struct ucontext))
-		return -EINVAL;
-
-	if (old_ctx != NULL) {
-		if (!access_ok(VERIFY_WRITE, old_ctx, sizeof(*old_ctx))
-		    || save_user_regs(regs, &old_ctx->uc_mcontext, 0)
-		    || __copy_to_user(&old_ctx->uc_sigmask,
-				      &current->blocked, sizeof(sigset_t))
-		    || __put_user(&old_ctx->uc_mcontext, &old_ctx->uc_regs))
-			return -EFAULT;
-	}
-	if (new_ctx == NULL)
-		return 0;
-	if (!access_ok(VERIFY_READ, new_ctx, sizeof(*new_ctx))
-	    || __get_user(tmp, (u8 __user *) new_ctx)
-	    || __get_user(tmp, (u8 __user *) (new_ctx + 1) - 1))
-		return -EFAULT;
-
-	/*
-	 * If we get a fault copying the context into the kernel's
-	 * image of the user's registers, we can't just return -EFAULT
-	 * because the user's registers will be corrupted.  For instance
-	 * the NIP value may have been updated but not some of the
-	 * other registers.  Given that we have done the access_ok
-	 * and successfully read the first and last bytes of the region
-	 * above, this should only happen in an out-of-memory situation
-	 * or if another thread unmaps the region containing the context.
-	 * We kill the task with a SIGSEGV in this situation.
-	 */
-	if (do_setcontext(new_ctx, regs, 0))
-		do_exit(SIGSEGV);
-	sigreturn_exit(regs);
-	/* doesn't actually return back to here */
-	return 0;
-}
-
-int sys_rt_sigreturn(int r3, int r4, int r5, int r6, int r7, int r8,
-		     struct pt_regs *regs)
-{
-	struct rt_sigframe __user *rt_sf;
-
-	/* Always make any pending restarted system calls return -EINTR */
-	current_thread_info()->restart_block.fn = do_no_restart_syscall;
-
-	rt_sf = (struct rt_sigframe __user *)
-		(regs->gpr[1] + __SIGNAL_FRAMESIZE + 16);
-	if (!access_ok(VERIFY_READ, rt_sf, sizeof(struct rt_sigframe)))
-		goto bad;
-	if (do_setcontext(&rt_sf->uc, regs, 1))
-		goto bad;
-
-	/*
-	 * It's not clear whether or why it is desirable to save the
-	 * sigaltstack setting on signal delivery and restore it on
-	 * signal return.  But other architectures do this and we have
-	 * always done it up until now so it is probably better not to
-	 * change it.  -- paulus
-	 */
-	do_sigaltstack(&rt_sf->uc.uc_stack, NULL, regs->gpr[1]);
-
-	sigreturn_exit(regs);		/* doesn't return here */
-	return 0;
-
- bad:
-	force_sig(SIGSEGV, current);
-	return 0;
-}
-
-int sys_debug_setcontext(struct ucontext __user *ctx,
-			 int ndbg, struct sig_dbg_op __user *dbg,
-			 int r6, int r7, int r8,
-			 struct pt_regs *regs)
-{
-	struct sig_dbg_op op;
-	int i;
-	unsigned long new_msr = regs->msr;
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
-	unsigned long new_dbcr0 = current->thread.dbcr0;
-#endif
-
-	for (i=0; i<ndbg; i++) {
-		if (__copy_from_user(&op, dbg, sizeof(op)))
-			return -EFAULT;
-		switch (op.dbg_type) {
-		case SIG_DBG_SINGLE_STEPPING:
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
-			if (op.dbg_value) {
-				new_msr |= MSR_DE;
-				new_dbcr0 |= (DBCR0_IDM | DBCR0_IC);
-			} else {
-				new_msr &= ~MSR_DE;
-				new_dbcr0 &= ~(DBCR0_IDM | DBCR0_IC);
-			}
-#else
-			if (op.dbg_value)
-				new_msr |= MSR_SE;
-			else
-				new_msr &= ~MSR_SE;
-#endif
-			break;
-		case SIG_DBG_BRANCH_TRACING:
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
-			return -EINVAL;
-#else
-			if (op.dbg_value)
-				new_msr |= MSR_BE;
-			else
-				new_msr &= ~MSR_BE;
-#endif
-			break;
-
-		default:
-			return -EINVAL;
-		}
-	}
-
-	/* We wait until here to actually install the values in the
-	   registers so if we fail in the above loop, it will not
-	   affect the contents of these registers.  After this point,
-	   failure is a problem, anyway, and it's very unlikely unless
-	   the user is really doing something wrong. */
-	regs->msr = new_msr;
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
-	current->thread.dbcr0 = new_dbcr0;
-#endif
-
-	/*
-	 * If we get a fault copying the context into the kernel's
-	 * image of the user's registers, we can't just return -EFAULT
-	 * because the user's registers will be corrupted.  For instance
-	 * the NIP value may have been updated but not some of the
-	 * other registers.  Given that we have done the access_ok
-	 * and successfully read the first and last bytes of the region
-	 * above, this should only happen in an out-of-memory situation
-	 * or if another thread unmaps the region containing the context.
-	 * We kill the task with a SIGSEGV in this situation.
-	 */
-	if (do_setcontext(ctx, regs, 1)) {
-		force_sig(SIGSEGV, current);
-		goto out;
-	}
-
-	/*
-	 * It's not clear whether or why it is desirable to save the
-	 * sigaltstack setting on signal delivery and restore it on
-	 * signal return.  But other architectures do this and we have
-	 * always done it up until now so it is probably better not to
-	 * change it.  -- paulus
-	 */
-	do_sigaltstack(&ctx->uc_stack, NULL, regs->gpr[1]);
-
-	sigreturn_exit(regs);
-	/* doesn't actually return back to here */
-
- out:
-	return 0;
-}
-
-/*
- * OK, we're invoking a handler
- */
-static void
-handle_signal(unsigned long sig, struct k_sigaction *ka,
-	      siginfo_t *info, sigset_t *oldset, struct pt_regs * regs,
-	      unsigned long newsp)
-{
-	struct sigcontext __user *sc;
-	struct sigregs __user *frame;
-	unsigned long origsp = newsp;
-
-	/* Set up Signal Frame */
-	newsp -= sizeof(struct sigregs);
-	frame = (struct sigregs __user *) newsp;
-
-	/* Put a sigcontext on the stack */
-	newsp -= sizeof(*sc);
-	sc = (struct sigcontext __user *) newsp;
-
-	/* create a stack frame for the caller of the handler */
-	newsp -= __SIGNAL_FRAMESIZE;
-
-	if (!access_ok(VERIFY_WRITE, (void __user *) newsp, origsp - newsp))
-		goto badframe;
-
-#if _NSIG != 64
-#error "Please adjust handle_signal()"
-#endif
-	if (__put_user((unsigned long) ka->sa.sa_handler, &sc->handler)
-	    || __put_user(oldset->sig[0], &sc->oldmask)
-	    || __put_user(oldset->sig[1], &sc->_unused[3])
-	    || __put_user((struct pt_regs __user *)frame, &sc->regs)
-	    || __put_user(sig, &sc->signal))
-		goto badframe;
-
-	if (save_user_regs(regs, &frame->mctx, __NR_sigreturn))
-		goto badframe;
-
-	if (put_user(regs->gpr[1], (unsigned long __user *)newsp))
-		goto badframe;
-	regs->gpr[1] = newsp;
-	regs->gpr[3] = sig;
-	regs->gpr[4] = (unsigned long) sc;
-	regs->nip = (unsigned long) ka->sa.sa_handler;
-	regs->link = (unsigned long) frame->mctx.tramp;
-	regs->trap = 0;
-
-	return;
-
-badframe:
-#ifdef DEBUG_SIG
-	printk("badframe in handle_signal, regs=%p frame=%p newsp=%lx\n",
-	       regs, frame, newsp);
-#endif
-	force_sigsegv(sig, current);
-}
-
-/*
- * Do a signal return; undo the signal stack.
- */
-int sys_sigreturn(int r3, int r4, int r5, int r6, int r7, int r8,
-		  struct pt_regs *regs)
-{
-	struct sigcontext __user *sc;
-	struct sigcontext sigctx;
-	struct mcontext __user *sr;
-	sigset_t set;
-
-	/* Always make any pending restarted system calls return -EINTR */
-	current_thread_info()->restart_block.fn = do_no_restart_syscall;
-
-	sc = (struct sigcontext __user *)(regs->gpr[1] + __SIGNAL_FRAMESIZE);
-	if (copy_from_user(&sigctx, sc, sizeof(sigctx)))
-		goto badframe;
-
-	set.sig[0] = sigctx.oldmask;
-	set.sig[1] = sigctx._unused[3];
-	restore_sigmask(&set);
-
-	sr = (struct mcontext __user *) sigctx.regs;
-	if (!access_ok(VERIFY_READ, sr, sizeof(*sr))
-	    || restore_user_regs(regs, sr, 1))
-		goto badframe;
-
-	sigreturn_exit(regs);		/* doesn't return */
-	return 0;
-
-badframe:
-	force_sig(SIGSEGV, current);
-	return 0;
-}
-
-/*
- * Note that 'init' is a special process: it doesn't get signals it doesn't
- * want to handle. Thus you cannot kill init even with a SIGKILL even by
- * mistake.
- */
-int do_signal(sigset_t *oldset, struct pt_regs *regs)
-{
-	siginfo_t info;
-	struct k_sigaction ka;
-	unsigned long frame, newsp;
-	int signr, ret;
-
-	if (try_to_freeze()) {
-		signr = 0;
-		if (!signal_pending(current))
-			goto no_signal;
-	}
-
-	if (!oldset)
-		oldset = &current->blocked;
-
-	newsp = frame = 0;
-
-	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
- no_signal:
-	if (TRAP(regs) == 0x0C00		/* System Call! */
-	    && regs->ccr & 0x10000000		/* error signalled */
-	    && ((ret = regs->gpr[3]) == ERESTARTSYS
-		|| ret == ERESTARTNOHAND || ret == ERESTARTNOINTR
-		|| ret == ERESTART_RESTARTBLOCK)) {
-
-		if (signr > 0
-		    && (ret == ERESTARTNOHAND || ret == ERESTART_RESTARTBLOCK
-			|| (ret == ERESTARTSYS
-			    && !(ka.sa.sa_flags & SA_RESTART)))) {
-			/* make the system call return an EINTR error */
-			regs->result = -EINTR;
-			regs->gpr[3] = EINTR;
-			/* note that the cr0.SO bit is already set */
-		} else {
-			regs->nip -= 4;	/* Back up & retry system call */
-			regs->result = 0;
-			regs->trap = 0;
-			if (ret == ERESTART_RESTARTBLOCK)
-				regs->gpr[0] = __NR_restart_syscall;
-			else
-				regs->gpr[3] = regs->orig_gpr3;
-		}
-	}
-
-	if (signr == 0)
-		return 0;		/* no signals delivered */
-
-	if ((ka.sa.sa_flags & SA_ONSTACK) && current->sas_ss_size
-	    && !on_sig_stack(regs->gpr[1]))
-		newsp = current->sas_ss_sp + current->sas_ss_size;
-	else
-		newsp = regs->gpr[1];
-	newsp &= ~0xfUL;
-
-	/* Whee!  Actually deliver the signal.  */
-	if (ka.sa.sa_flags & SA_SIGINFO)
-		handle_rt_signal(signr, &ka, &info, oldset, regs, newsp);
-	else
-		handle_signal(signr, &ka, &info, oldset, regs, newsp);
-
-	spin_lock_irq(&current->sighand->siglock);
-	sigorsets(&current->blocked,&current->blocked,&ka.sa.sa_mask);
-	if (!(ka.sa.sa_flags & SA_NODEFER))
-		sigaddset(&current->blocked, signr);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	return 1;
-}
-
diff --git a/arch/ppc/kernel/smp.c b/arch/ppc/kernel/smp.c
index 726fe7ce1747..43b8fc2ca591 100644
--- a/arch/ppc/kernel/smp.c
+++ b/arch/ppc/kernel/smp.c
@@ -34,11 +34,11 @@
 #include <asm/thread_info.h>
 #include <asm/tlbflush.h>
 #include <asm/xmon.h>
+#include <asm/machdep.h>
 
 volatile int smp_commenced;
 int smp_tb_synchronized;
 struct cpuinfo_PPC cpu_data[NR_CPUS];
-struct klock_info_struct klock_info = { KLOCK_CLEAR, 0 };
 atomic_t ipi_recv;
 atomic_t ipi_sent;
 cpumask_t cpu_online_map;
@@ -51,7 +51,7 @@ EXPORT_SYMBOL(cpu_online_map);
 EXPORT_SYMBOL(cpu_possible_map);
 
 /* SMP operations for this machine */
-static struct smp_ops_t *smp_ops;
+struct smp_ops_t *smp_ops;
 
 /* all cpu mappings are 1-1 -- Cort */
 volatile unsigned long cpu_callin_map[NR_CPUS];
@@ -74,11 +74,11 @@ extern void __save_cpu_setup(void);
 #define PPC_MSG_XMON_BREAK	3
 
 static inline void
-smp_message_pass(int target, int msg, unsigned long data, int wait)
+smp_message_pass(int target, int msg)
 {
-	if (smp_ops){
+	if (smp_ops) {
 		atomic_inc(&ipi_sent);
-		smp_ops->message_pass(target,msg,data,wait);
+		smp_ops->message_pass(target, msg);
 	}
 }
 
@@ -119,7 +119,7 @@ void smp_message_recv(int msg, struct pt_regs *regs)
 void smp_send_tlb_invalidate(int cpu)
 {
 	if ( PVR_VER(mfspr(SPRN_PVR)) == 8 )
-		smp_message_pass(MSG_ALL_BUT_SELF, PPC_MSG_INVALIDATE_TLB, 0, 0);
+		smp_message_pass(MSG_ALL_BUT_SELF, PPC_MSG_INVALIDATE_TLB);
 }
 
 void smp_send_reschedule(int cpu)
@@ -135,13 +135,13 @@ void smp_send_reschedule(int cpu)
 	 */
 	/* This is only used if `cpu' is running an idle task,
 	   so it will reschedule itself anyway... */
-	smp_message_pass(cpu, PPC_MSG_RESCHEDULE, 0, 0);
+	smp_message_pass(cpu, PPC_MSG_RESCHEDULE);
 }
 
 #ifdef CONFIG_XMON
 void smp_send_xmon_break(int cpu)
 {
-	smp_message_pass(cpu, PPC_MSG_XMON_BREAK, 0, 0);
+	smp_message_pass(cpu, PPC_MSG_XMON_BREAK);
 }
 #endif /* CONFIG_XMON */
 
@@ -224,7 +224,7 @@ static int __smp_call_function(void (*func) (void *info), void *info,
 	spin_lock(&call_lock);
 	call_data = &data;
 	/* Send a message to all other CPUs and wait for them to respond */
-	smp_message_pass(target, PPC_MSG_CALL_FUNCTION, 0, 0);
+	smp_message_pass(target, PPC_MSG_CALL_FUNCTION);
 
 	/* Wait for response */
 	timeout = 1000000;
@@ -294,7 +294,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
         smp_store_cpu_info(smp_processor_id());
 	cpu_callin_map[smp_processor_id()] = 1;
 
-	smp_ops = ppc_md.smp_ops;
 	if (smp_ops == NULL) {
 		printk("SMP not supported on this machine.\n");
 		return;
@@ -308,9 +307,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	/* Backup CPU 0 state */
 	__save_cpu_setup();
 
-	if (smp_ops->space_timers)
-		smp_ops->space_timers(num_cpus);
-
 	for_each_cpu(cpu) {
 		if (cpu == smp_processor_id())
 			continue;
@@ -345,6 +341,7 @@ int __devinit start_secondary(void *unused)
 	cpu = smp_processor_id();
         smp_store_cpu_info(cpu);
 	set_dec(tb_ticks_per_jiffy);
+	preempt_disable();
 	cpu_callin_map[cpu] = 1;
 
 	printk("CPU %d done callin...\n", cpu);
diff --git a/arch/ppc/kernel/syscalls.c b/arch/ppc/kernel/syscalls.c
deleted file mode 100644
index 127f040de9de..000000000000
--- a/arch/ppc/kernel/syscalls.c
+++ /dev/null
@@ -1,268 +0,0 @@
-/*
- * arch/ppc/kernel/sys_ppc.c
- *
- *  PowerPC version
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Derived from "arch/i386/kernel/sys_i386.c"
- * Adapted from the i386 version by Gary Thomas
- * Modified by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras (paulus@cs.anu.edu.au).
- *
- * This file contains various random system calls that
- * have a non-standard calling sequence on the Linux/PPC
- * platform.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/sem.h>
-#include <linux/msg.h>
-#include <linux/shm.h>
-#include <linux/stat.h>
-#include <linux/syscalls.h>
-#include <linux/mman.h>
-#include <linux/sys.h>
-#include <linux/ipc.h>
-#include <linux/utsname.h>
-#include <linux/file.h>
-#include <linux/unistd.h>
-
-#include <asm/uaccess.h>
-#include <asm/ipc.h>
-#include <asm/semaphore.h>
-
-
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-int
-sys_ipc (uint call, int first, int second, int third, void __user *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	ret = -ENOSYS;
-	switch (call) {
-	case SEMOP:
-		ret = sys_semtimedop (first, (struct sembuf __user *)ptr,
-				      second, NULL);
-		break;
-	case SEMTIMEDOP:
-		ret = sys_semtimedop (first, (struct sembuf __user *)ptr,
-				      second, (const struct timespec __user *) fifth);
-		break;
-	case SEMGET:
-		ret = sys_semget (first, second, third);
-		break;
-	case SEMCTL: {
-		union semun fourth;
-
-		if (!ptr)
-			break;
-		if ((ret = access_ok(VERIFY_READ, ptr, sizeof(long)) ? 0 : -EFAULT)
-		    || (ret = get_user(fourth.__pad, (void __user *__user *)ptr)))
-			break;
-		ret = sys_semctl (first, second, third, fourth);
-		break;
-		}
-	case MSGSND:
-		ret = sys_msgsnd (first, (struct msgbuf __user *) ptr, second, third);
-		break;
-	case MSGRCV:
-		switch (version) {
-		case 0: {
-			struct ipc_kludge tmp;
-
-			if (!ptr)
-				break;
-			if ((ret = access_ok(VERIFY_READ, ptr, sizeof(tmp)) ? 0 : -EFAULT)
-			    || (ret = copy_from_user(&tmp,
-					(struct ipc_kludge __user *) ptr,
-					sizeof (tmp)) ? -EFAULT : 0))
-				break;
-			ret = sys_msgrcv (first, tmp.msgp, second, tmp.msgtyp,
-					  third);
-			break;
-			}
-		default:
-			ret = sys_msgrcv (first, (struct msgbuf __user *) ptr,
-					  second, fifth, third);
-			break;
-		}
-		break;
-	case MSGGET:
-		ret = sys_msgget ((key_t) first, second);
-		break;
-	case MSGCTL:
-		ret = sys_msgctl (first, second, (struct msqid_ds __user *) ptr);
-		break;
-	case SHMAT: {
-		ulong raddr;
-
-		if ((ret = access_ok(VERIFY_WRITE, (ulong __user *) third,
-				       sizeof(ulong)) ? 0 : -EFAULT))
-			break;
-		ret = do_shmat (first, (char __user *) ptr, second, &raddr);
-		if (ret)
-			break;
-		ret = put_user (raddr, (ulong __user *) third);
-		break;
-		}
-	case SHMDT:
-		ret = sys_shmdt ((char __user *)ptr);
-		break;
-	case SHMGET:
-		ret = sys_shmget (first, second, third);
-		break;
-	case SHMCTL:
-		ret = sys_shmctl (first, second, (struct shmid_ds __user *) ptr);
-		break;
-	}
-
-	return ret;
-}
-
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way unix traditionally does this, though.
- */
-int sys_pipe(int __user *fildes)
-{
-	int fd[2];
-	int error;
-
-	error = do_pipe(fd);
-	if (!error) {
-		if (copy_to_user(fildes, fd, 2*sizeof(int)))
-			error = -EFAULT;
-	}
-	return error;
-}
-
-static inline unsigned long
-do_mmap2(unsigned long addr, size_t len,
-	 unsigned long prot, unsigned long flags,
-	 unsigned long fd, unsigned long pgoff)
-{
-	struct file * file = NULL;
-	int ret = -EBADF;
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	if (!(flags & MAP_ANONYMOUS)) {
-		if (!(file = fget(fd)))
-			goto out;
-	}
-
-	down_write(&current->mm->mmap_sem);
-	ret = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
-	up_write(&current->mm->mmap_sem);
-	if (file)
-		fput(file);
-out:
-	return ret;
-}
-
-unsigned long sys_mmap2(unsigned long addr, size_t len,
-			unsigned long prot, unsigned long flags,
-			unsigned long fd, unsigned long pgoff)
-{
-	return do_mmap2(addr, len, prot, flags, fd, pgoff);
-}
-
-unsigned long sys_mmap(unsigned long addr, size_t len,
-		       unsigned long prot, unsigned long flags,
-		       unsigned long fd, off_t offset)
-{
-	int err = -EINVAL;
-
-	if (offset & ~PAGE_MASK)
-		goto out;
-
-	err = do_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
-out:
-	return err;
-}
-
-/*
- * Due to some executables calling the wrong select we sometimes
- * get wrong args.  This determines how the args are being passed
- * (a single ptr to them all args passed) then calls
- * sys_select() with the appropriate args. -- Cort
- */
-int
-ppc_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp, struct timeval __user *tvp)
-{
-	if ( (unsigned long)n >= 4096 )
-	{
-		unsigned long __user *buffer = (unsigned long __user *)n;
-		if (!access_ok(VERIFY_READ, buffer, 5*sizeof(unsigned long))
-		    || __get_user(n, buffer)
-		    || __get_user(inp, ((fd_set __user * __user *)(buffer+1)))
-		    || __get_user(outp, ((fd_set  __user * __user *)(buffer+2)))
-		    || __get_user(exp, ((fd_set  __user * __user *)(buffer+3)))
-		    || __get_user(tvp, ((struct timeval  __user * __user *)(buffer+4))))
-			return -EFAULT;
-	}
-	return sys_select(n, inp, outp, exp, tvp);
-}
-
-int sys_uname(struct old_utsname __user * name)
-{
-	int err = -EFAULT;
-
-	down_read(&uts_sem);
-	if (name && !copy_to_user(name, &system_utsname, sizeof (*name)))
-		err = 0;
-	up_read(&uts_sem);
-	return err;
-}
-
-int sys_olduname(struct oldold_utsname __user * name)
-{
-	int error;
-
-	if (!name)
-		return -EFAULT;
-	if (!access_ok(VERIFY_WRITE,name,sizeof(struct oldold_utsname)))
-		return -EFAULT;
-
-	down_read(&uts_sem);
-	error = __copy_to_user(&name->sysname,&system_utsname.sysname,__OLD_UTS_LEN);
-	error -= __put_user(0,name->sysname+__OLD_UTS_LEN);
-	error -= __copy_to_user(&name->nodename,&system_utsname.nodename,__OLD_UTS_LEN);
-	error -= __put_user(0,name->nodename+__OLD_UTS_LEN);
-	error -= __copy_to_user(&name->release,&system_utsname.release,__OLD_UTS_LEN);
-	error -= __put_user(0,name->release+__OLD_UTS_LEN);
-	error -= __copy_to_user(&name->version,&system_utsname.version,__OLD_UTS_LEN);
-	error -= __put_user(0,name->version+__OLD_UTS_LEN);
-	error -= __copy_to_user(&name->machine,&system_utsname.machine,__OLD_UTS_LEN);
-	error = __put_user(0,name->machine+__OLD_UTS_LEN);
-	up_read(&uts_sem);
-
-	error = error ? -EFAULT : 0;
-	return error;
-}
-
-/*
- * We put the arguments in a different order so we only use 6
- * registers for arguments, rather than 7 as sys_fadvise64_64 needs
- * (because `offset' goes in r5/r6).
- */
-long ppc_fadvise64_64(int fd, int advice, loff_t offset, loff_t len)
-{
-	return sys_fadvise64_64(fd, offset, len, advice);
-}
diff --git a/arch/ppc/kernel/time.c b/arch/ppc/kernel/time.c
index 22d7fd1e0aea..53ea723af60a 100644
--- a/arch/ppc/kernel/time.c
+++ b/arch/ppc/kernel/time.c
@@ -66,11 +66,6 @@
 
 #include <asm/time.h>
 
-/* XXX false sharing with below? */
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 unsigned long disarm_decr[NR_CPUS];
 
 extern struct timezone sys_tz;
@@ -121,6 +116,15 @@ unsigned long profile_pc(struct pt_regs *regs)
 EXPORT_SYMBOL(profile_pc);
 #endif
 
+void wakeup_decrementer(void)
+{
+	set_dec(tb_ticks_per_jiffy);
+	/* No currently-supported powerbook has a 601,
+	 * so use get_tbl, not native
+	 */
+	last_jiffy_stamp(0) = tb_last_stamp = get_tbl();
+}
+
 /*
  * timer_interrupt - gets called when the decrementer overflows,
  * with interrupts disabled.
diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c
index 961ede87be72..9dbc4d28fa28 100644
--- a/arch/ppc/kernel/traps.c
+++ b/arch/ppc/kernel/traps.c
@@ -41,10 +41,15 @@
 #ifdef CONFIG_PMAC_BACKLIGHT
 #include <asm/backlight.h>
 #endif
-#include <asm/perfmon.h>
+#include <asm/pmc.h>
 
 #ifdef CONFIG_XMON
-void (*debugger)(struct pt_regs *regs) = xmon;
+extern int xmon_bpt(struct pt_regs *regs);
+extern int xmon_sstep(struct pt_regs *regs);
+extern int xmon_iabr_match(struct pt_regs *regs);
+extern int xmon_dabr_match(struct pt_regs *regs);
+
+int (*debugger)(struct pt_regs *regs) = xmon;
 int (*debugger_bpt)(struct pt_regs *regs) = xmon_bpt;
 int (*debugger_sstep)(struct pt_regs *regs) = xmon_sstep;
 int (*debugger_iabr_match)(struct pt_regs *regs) = xmon_iabr_match;
@@ -52,7 +57,7 @@ int (*debugger_dabr_match)(struct pt_regs *regs) = xmon_dabr_match;
 void (*debugger_fault_handler)(struct pt_regs *regs);
 #else
 #ifdef CONFIG_KGDB
-void (*debugger)(struct pt_regs *regs);
+int (*debugger)(struct pt_regs *regs);
 int (*debugger_bpt)(struct pt_regs *regs);
 int (*debugger_sstep)(struct pt_regs *regs);
 int (*debugger_iabr_match)(struct pt_regs *regs);
@@ -74,7 +79,7 @@ void (*debugger_fault_handler)(struct pt_regs *regs);
 
 DEFINE_SPINLOCK(die_lock);
 
-void die(const char * str, struct pt_regs * fp, long err)
+int die(const char * str, struct pt_regs * fp, long err)
 {
 	static int die_counter;
 	int nl = 0;
@@ -154,7 +159,7 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr)
  */
 static inline int check_io_access(struct pt_regs *regs)
 {
-#ifdef CONFIG_PPC_PMAC
+#if defined CONFIG_PPC_PMAC || defined CONFIG_8xx
 	unsigned long msr = regs->msr;
 	const struct exception_table_entry *entry;
 	unsigned int *nip = (unsigned int *)regs->nip;
@@ -173,7 +178,11 @@ static inline int check_io_access(struct pt_regs *regs)
 			nip -= 2;
 		else if (*nip == 0x4c00012c)	/* isync */
 			--nip;
-		if (*nip == 0x7c0004ac || (*nip >> 26) == 3) {
+		/* eieio from I/O string functions */
+		else if ((*nip) == 0x7c0006ac || *(nip+1) == 0x7c0006ac)
+			nip += 2;
+		if (*nip == 0x7c0004ac || (*nip >> 26) == 3 ||
+			(*(nip+1) >> 26) == 3) {
 			/* sync or twi */
 			unsigned int rb;
 
@@ -232,7 +241,7 @@ platform_machine_check(struct pt_regs *regs)
 {
 }
 
-void MachineCheckException(struct pt_regs *regs)
+void machine_check_exception(struct pt_regs *regs)
 {
 	unsigned long reason = get_mc_reason(regs);
 
@@ -393,14 +402,14 @@ void SMIException(struct pt_regs *regs)
 #endif
 }
 
-void UnknownException(struct pt_regs *regs)
+void unknown_exception(struct pt_regs *regs)
 {
 	printk("Bad trap at PC: %lx, MSR: %lx, vector=%lx    %s\n",
 	       regs->nip, regs->msr, regs->trap, print_tainted());
 	_exception(SIGTRAP, regs, 0, 0);
 }
 
-void InstructionBreakpoint(struct pt_regs *regs)
+void instruction_breakpoint_exception(struct pt_regs *regs)
 {
 	if (debugger_iabr_match(regs))
 		return;
@@ -575,7 +584,7 @@ extern struct bug_entry __start___bug_table[], __stop___bug_table[];
 #define module_find_bug(x)	NULL
 #endif
 
-static struct bug_entry *find_bug(unsigned long bugaddr)
+struct bug_entry *find_bug(unsigned long bugaddr)
 {
 	struct bug_entry *bug;
 
@@ -601,28 +610,28 @@ int check_bug_trap(struct pt_regs *regs)
 	if (bug->line & BUG_WARNING_TRAP) {
 		/* this is a WARN_ON rather than BUG/BUG_ON */
 #ifdef CONFIG_XMON
-		xmon_printf(KERN_ERR "Badness in %s at %s:%d\n",
+		xmon_printf(KERN_ERR "Badness in %s at %s:%ld\n",
 		       bug->function, bug->file,
 		       bug->line & ~BUG_WARNING_TRAP);
 #endif /* CONFIG_XMON */		
-		printk(KERN_ERR "Badness in %s at %s:%d\n",
+		printk(KERN_ERR "Badness in %s at %s:%ld\n",
 		       bug->function, bug->file,
 		       bug->line & ~BUG_WARNING_TRAP);
 		dump_stack();
 		return 1;
 	}
 #ifdef CONFIG_XMON
-	xmon_printf(KERN_CRIT "kernel BUG in %s at %s:%d!\n",
+	xmon_printf(KERN_CRIT "kernel BUG in %s at %s:%ld!\n",
 	       bug->function, bug->file, bug->line);
 	xmon(regs);
 #endif /* CONFIG_XMON */
-	printk(KERN_CRIT "kernel BUG in %s at %s:%d!\n",
+	printk(KERN_CRIT "kernel BUG in %s at %s:%ld!\n",
 	       bug->function, bug->file, bug->line);
 
 	return 0;
 }
 
-void ProgramCheckException(struct pt_regs *regs)
+void program_check_exception(struct pt_regs *regs)
 {
 	unsigned int reason = get_reason(regs);
 	extern int do_mathemu(struct pt_regs *regs);
@@ -654,7 +663,7 @@ void ProgramCheckException(struct pt_regs *regs)
 			giveup_fpu(current);
 		preempt_enable();
 
-		fpscr = current->thread.fpscr;
+		fpscr = current->thread.fpscr.val;
 		fpscr &= fpscr << 22;	/* mask summary bits with enables */
 		if (fpscr & FPSCR_VX)
 			code = FPE_FLTINV;
@@ -701,7 +710,7 @@ void ProgramCheckException(struct pt_regs *regs)
 		_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
 }
 
-void SingleStepException(struct pt_regs *regs)
+void single_step_exception(struct pt_regs *regs)
 {
 	regs->msr &= ~(MSR_SE | MSR_BE);  /* Turn off 'trace' bits */
 	if (debugger_sstep(regs))
@@ -709,7 +718,7 @@ void SingleStepException(struct pt_regs *regs)
 	_exception(SIGTRAP, regs, TRAP_TRACE, 0);
 }
 
-void AlignmentException(struct pt_regs *regs)
+void alignment_exception(struct pt_regs *regs)
 {
 	int fixed;
 
@@ -814,7 +823,18 @@ void TAUException(struct pt_regs *regs)
 }
 #endif /* CONFIG_INT_TAU */
 
-void AltivecUnavailException(struct pt_regs *regs)
+/*
+ * FP unavailable trap from kernel - print a message, but let
+ * the task use FP in the kernel until it returns to user mode.
+ */
+void kernel_fp_unavailable_exception(struct pt_regs *regs)
+{
+	regs->msr |= MSR_FP;
+	printk(KERN_ERR "floating point used in kernel (task=%p, pc=%lx)\n",
+	       current, regs->nip);
+}
+
+void altivec_unavailable_exception(struct pt_regs *regs)
 {
 	static int kernel_altivec_count;
 
@@ -835,7 +855,7 @@ void AltivecUnavailException(struct pt_regs *regs)
 }
 
 #ifdef CONFIG_ALTIVEC
-void AltivecAssistException(struct pt_regs *regs)
+void altivec_assist_exception(struct pt_regs *regs)
 {
 	int err;
 
@@ -872,7 +892,7 @@ void AltivecAssistException(struct pt_regs *regs)
 #endif /* CONFIG_ALTIVEC */
 
 #ifdef CONFIG_E500
-void PerformanceMonitorException(struct pt_regs *regs)
+void performance_monitor_exception(struct pt_regs *regs)
 {
 	perf_irq(regs);
 }
diff --git a/arch/ppc/kernel/vector.S b/arch/ppc/kernel/vector.S
deleted file mode 100644
index 82a21346bf80..000000000000
--- a/arch/ppc/kernel/vector.S
+++ /dev/null
@@ -1,217 +0,0 @@
-#include <asm/ppc_asm.h>
-#include <asm/processor.h>
-
-/*
- * The routines below are in assembler so we can closely control the
- * usage of floating-point registers.  These routines must be called
- * with preempt disabled.
- */
-	.data
-fpzero:
-	.long	0
-fpone:
-	.long	0x3f800000	/* 1.0 in single-precision FP */
-fphalf:
-	.long	0x3f000000	/* 0.5 in single-precision FP */
-
-	.text
-/*
- * Internal routine to enable floating point and set FPSCR to 0.
- * Don't call it from C; it doesn't use the normal calling convention.
- */
-fpenable:
-	mfmsr	r10
-	ori	r11,r10,MSR_FP
-	mtmsr	r11
-	isync
-	stfd	fr0,24(r1)
-	stfd	fr1,16(r1)
-	stfd	fr31,8(r1)
-	lis	r11,fpzero@ha
-	mffs	fr31
-	lfs	fr1,fpzero@l(r11)
-	mtfsf	0xff,fr1
-	blr
-
-fpdisable:
-	mtfsf	0xff,fr31
-	lfd	fr31,8(r1)
-	lfd	fr1,16(r1)
-	lfd	fr0,24(r1)
-	mtmsr	r10
-	isync
-	blr
-
-/*
- * Vector add, floating point.
- */
-	.globl	vaddfp
-vaddfp:
-	stwu	r1,-32(r1)
-	mflr	r0
-	stw	r0,36(r1)
-	bl	fpenable
-	li	r0,4
-	mtctr	r0
-	li	r6,0
-1:	lfsx	fr0,r4,r6
-	lfsx	fr1,r5,r6
-	fadds	fr0,fr0,fr1
-	stfsx	fr0,r3,r6
-	addi	r6,r6,4
-	bdnz	1b
-	bl	fpdisable
-	lwz	r0,36(r1)
-	mtlr	r0
-	addi	r1,r1,32
-	blr
-
-/*
- * Vector subtract, floating point.
- */
-	.globl	vsubfp
-vsubfp:
-	stwu	r1,-32(r1)
-	mflr	r0
-	stw	r0,36(r1)
-	bl	fpenable
-	li	r0,4
-	mtctr	r0
-	li	r6,0
-1:	lfsx	fr0,r4,r6
-	lfsx	fr1,r5,r6
-	fsubs	fr0,fr0,fr1
-	stfsx	fr0,r3,r6
-	addi	r6,r6,4
-	bdnz	1b
-	bl	fpdisable
-	lwz	r0,36(r1)
-	mtlr	r0
-	addi	r1,r1,32
-	blr
-
-/*
- * Vector multiply and add, floating point.
- */
-	.globl	vmaddfp
-vmaddfp:
-	stwu	r1,-48(r1)
-	mflr	r0
-	stw	r0,52(r1)
-	bl	fpenable
-	stfd	fr2,32(r1)
-	li	r0,4
-	mtctr	r0
-	li	r7,0
-1:	lfsx	fr0,r4,r7
-	lfsx	fr1,r5,r7
-	lfsx	fr2,r6,r7
-	fmadds	fr0,fr0,fr2,fr1
-	stfsx	fr0,r3,r7
-	addi	r7,r7,4
-	bdnz	1b
-	lfd	fr2,32(r1)
-	bl	fpdisable
-	lwz	r0,52(r1)
-	mtlr	r0
-	addi	r1,r1,48
-	blr
-
-/*
- * Vector negative multiply and subtract, floating point.
- */
-	.globl	vnmsubfp
-vnmsubfp:
-	stwu	r1,-48(r1)
-	mflr	r0
-	stw	r0,52(r1)
-	bl	fpenable
-	stfd	fr2,32(r1)
-	li	r0,4
-	mtctr	r0
-	li	r7,0
-1:	lfsx	fr0,r4,r7
-	lfsx	fr1,r5,r7
-	lfsx	fr2,r6,r7
-	fnmsubs	fr0,fr0,fr2,fr1
-	stfsx	fr0,r3,r7
-	addi	r7,r7,4
-	bdnz	1b
-	lfd	fr2,32(r1)
-	bl	fpdisable
-	lwz	r0,52(r1)
-	mtlr	r0
-	addi	r1,r1,48
-	blr
-
-/*
- * Vector reciprocal estimate.  We just compute 1.0/x.
- * r3 -> destination, r4 -> source.
- */
-	.globl	vrefp
-vrefp:
-	stwu	r1,-32(r1)
-	mflr	r0
-	stw	r0,36(r1)
-	bl	fpenable
-	lis	r9,fpone@ha
-	li	r0,4
-	lfs	fr1,fpone@l(r9)
-	mtctr	r0
-	li	r6,0
-1:	lfsx	fr0,r4,r6
-	fdivs	fr0,fr1,fr0
-	stfsx	fr0,r3,r6
-	addi	r6,r6,4
-	bdnz	1b
-	bl	fpdisable
-	lwz	r0,36(r1)
-	mtlr	r0
-	addi	r1,r1,32
-	blr
-
-/*
- * Vector reciprocal square-root estimate, floating point.
- * We use the frsqrte instruction for the initial estimate followed
- * by 2 iterations of Newton-Raphson to get sufficient accuracy.
- * r3 -> destination, r4 -> source.
- */
-	.globl	vrsqrtefp
-vrsqrtefp:
-	stwu	r1,-48(r1)
-	mflr	r0
-	stw	r0,52(r1)
-	bl	fpenable
-	stfd	fr2,32(r1)
-	stfd	fr3,40(r1)
-	stfd	fr4,48(r1)
-	stfd	fr5,56(r1)
-	lis	r9,fpone@ha
-	lis	r8,fphalf@ha
-	li	r0,4
-	lfs	fr4,fpone@l(r9)
-	lfs	fr5,fphalf@l(r8)
-	mtctr	r0
-	li	r6,0
-1:	lfsx	fr0,r4,r6
-	frsqrte	fr1,fr0		/* r = frsqrte(s) */
-	fmuls	fr3,fr1,fr0	/* r * s */
-	fmuls	fr2,fr1,fr5	/* r * 0.5 */
-	fnmsubs	fr3,fr1,fr3,fr4	/* 1 - s * r * r */
-	fmadds	fr1,fr2,fr3,fr1	/* r = r + 0.5 * r * (1 - s * r * r) */
-	fmuls	fr3,fr1,fr0	/* r * s */
-	fmuls	fr2,fr1,fr5	/* r * 0.5 */
-	fnmsubs	fr3,fr1,fr3,fr4	/* 1 - s * r * r */
-	fmadds	fr1,fr2,fr3,fr1	/* r = r + 0.5 * r * (1 - s * r * r) */
-	stfsx	fr1,r3,r6
-	addi	r6,r6,4
-	bdnz	1b
-	lfd	fr5,56(r1)
-	lfd	fr4,48(r1)
-	lfd	fr3,40(r1)
-	lfd	fr2,32(r1)
-	bl	fpdisable
-	lwz	r0,36(r1)
-	mtlr	r0
-	addi	r1,r1,32
-	blr
diff --git a/arch/ppc/kernel/vmlinux.lds.S b/arch/ppc/kernel/vmlinux.lds.S
index 17d2db7e537d..09c6525cfa61 100644
--- a/arch/ppc/kernel/vmlinux.lds.S
+++ b/arch/ppc/kernel/vmlinux.lds.S
@@ -149,32 +149,6 @@ SECTIONS
 
   . = ALIGN(4096);
   _sextratext = .;
-  __pmac_begin = .;
-  .pmac.text : { *(.pmac.text) }
-  .pmac.data : { *(.pmac.data) }
-  . = ALIGN(4096);
-  __pmac_end = .;
-
-  . = ALIGN(4096);
-  __prep_begin = .;
-  .prep.text : { *(.prep.text) }
-  .prep.data : { *(.prep.data) }
-  . = ALIGN(4096);
-  __prep_end = .;
-
-  . = ALIGN(4096);
-  __chrp_begin = .;
-  .chrp.text : { *(.chrp.text) }
-  .chrp.data : { *(.chrp.data) }
-  . = ALIGN(4096);
-  __chrp_end = .;
-
-  . = ALIGN(4096);
-  __openfirmware_begin = .;
-  .openfirmware.text : { *(.openfirmware.text) }
-  .openfirmware.data : { *(.openfirmware.data) }
-  . = ALIGN(4096);
-  __openfirmware_end = .;
   _eextratext = .;
 
   __bss_start = .;
diff --git a/arch/ppc/lib/string.S b/arch/ppc/lib/string.S
index 36c9b97fd92a..2e258c49e8be 100644
--- a/arch/ppc/lib/string.S
+++ b/arch/ppc/lib/string.S
@@ -65,9 +65,9 @@
 	.stabs	"arch/ppc/lib/",N_SO,0,0,0f
 	.stabs	"string.S",N_SO,0,0,0f
 
-CACHELINE_BYTES = L1_CACHE_LINE_SIZE
-LG_CACHELINE_BYTES = LG_L1_CACHE_LINE_SIZE
-CACHELINE_MASK = (L1_CACHE_LINE_SIZE-1)
+CACHELINE_BYTES = L1_CACHE_BYTES
+LG_CACHELINE_BYTES = L1_CACHE_SHIFT
+CACHELINE_MASK = (L1_CACHE_BYTES-1)
 
 _GLOBAL(strcpy)
 	addi	r5,r3,-1
@@ -265,12 +265,12 @@ _GLOBAL(cacheable_memcpy)
 	dcbz	r11,r6
 #endif
 	COPY_16_BYTES
-#if L1_CACHE_LINE_SIZE >= 32
+#if L1_CACHE_BYTES >= 32
 	COPY_16_BYTES
-#if L1_CACHE_LINE_SIZE >= 64
+#if L1_CACHE_BYTES >= 64
 	COPY_16_BYTES
 	COPY_16_BYTES
-#if L1_CACHE_LINE_SIZE >= 128
+#if L1_CACHE_BYTES >= 128
 	COPY_16_BYTES
 	COPY_16_BYTES
 	COPY_16_BYTES
@@ -485,12 +485,12 @@ _GLOBAL(__copy_tofrom_user)
 	.text
 /* the main body of the cacheline loop */
 	COPY_16_BYTES_WITHEX(0)
-#if L1_CACHE_LINE_SIZE >= 32
+#if L1_CACHE_BYTES >= 32
 	COPY_16_BYTES_WITHEX(1)
-#if L1_CACHE_LINE_SIZE >= 64
+#if L1_CACHE_BYTES >= 64
 	COPY_16_BYTES_WITHEX(2)
 	COPY_16_BYTES_WITHEX(3)
-#if L1_CACHE_LINE_SIZE >= 128
+#if L1_CACHE_BYTES >= 128
 	COPY_16_BYTES_WITHEX(4)
 	COPY_16_BYTES_WITHEX(5)
 	COPY_16_BYTES_WITHEX(6)
@@ -544,12 +544,12 @@ _GLOBAL(__copy_tofrom_user)
  * 104f (if in read part) or 105f (if in write part), after updating r5
  */
 	COPY_16_BYTES_EXCODE(0)
-#if L1_CACHE_LINE_SIZE >= 32
+#if L1_CACHE_BYTES >= 32
 	COPY_16_BYTES_EXCODE(1)
-#if L1_CACHE_LINE_SIZE >= 64
+#if L1_CACHE_BYTES >= 64
 	COPY_16_BYTES_EXCODE(2)
 	COPY_16_BYTES_EXCODE(3)
-#if L1_CACHE_LINE_SIZE >= 128
+#if L1_CACHE_BYTES >= 128
 	COPY_16_BYTES_EXCODE(4)
 	COPY_16_BYTES_EXCODE(5)
 	COPY_16_BYTES_EXCODE(6)
diff --git a/arch/ppc/math-emu/sfp-machine.h b/arch/ppc/math-emu/sfp-machine.h
index 686e06d29186..4b17d83cfcdd 100644
--- a/arch/ppc/math-emu/sfp-machine.h
+++ b/arch/ppc/math-emu/sfp-machine.h
@@ -166,7 +166,7 @@ extern int  fp_pack_ds(void *, long, unsigned long, unsigned long, long, long);
 #include <linux/kernel.h>
 #include <linux/sched.h>
 
-#define __FPU_FPSCR	(current->thread.fpscr)
+#define __FPU_FPSCR	(current->thread.fpscr.val)
 
 /* We only actually write to the destination register
  * if exceptions signalled (if any) will not trap.
diff --git a/arch/ppc/mm/4xx_mmu.c b/arch/ppc/mm/4xx_mmu.c
index b7bcbc232f39..4d006aa1a0d1 100644
--- a/arch/ppc/mm/4xx_mmu.c
+++ b/arch/ppc/mm/4xx_mmu.c
@@ -110,13 +110,11 @@ unsigned long __init mmu_mapin_ram(void)
 		pmd_t *pmdp;
 		unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE;
 
-		spin_lock(&init_mm.page_table_lock);
 		pmdp = pmd_offset(pgd_offset_k(v), v);
 		pmd_val(*pmdp++) = val;
 		pmd_val(*pmdp++) = val;
 		pmd_val(*pmdp++) = val;
 		pmd_val(*pmdp++) = val;
-		spin_unlock(&init_mm.page_table_lock);
 
 		v += LARGE_PAGE_SIZE_16M;
 		p += LARGE_PAGE_SIZE_16M;
@@ -127,10 +125,8 @@ unsigned long __init mmu_mapin_ram(void)
 		pmd_t *pmdp;
 		unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE;
 
-		spin_lock(&init_mm.page_table_lock);
 		pmdp = pmd_offset(pgd_offset_k(v), v);
 		pmd_val(*pmdp) = val;
-		spin_unlock(&init_mm.page_table_lock);
 
 		v += LARGE_PAGE_SIZE_4M;
 		p += LARGE_PAGE_SIZE_4M;
diff --git a/arch/ppc/mm/fsl_booke_mmu.c b/arch/ppc/mm/fsl_booke_mmu.c
index af9ca0eb6d55..5d581bb3aa12 100644
--- a/arch/ppc/mm/fsl_booke_mmu.c
+++ b/arch/ppc/mm/fsl_booke_mmu.c
@@ -1,5 +1,5 @@
 /*
- * Modifications by Kumar Gala (kumar.gala@freescale.com) to support
+ * Modifications by Kumar Gala (galak@kernel.crashing.org) to support
  * E500 Book E processors.
  *
  * Copyright 2004 Freescale Semiconductor, Inc
diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c
index f421a4b337f6..45f0782059f1 100644
--- a/arch/ppc/mm/init.c
+++ b/arch/ppc/mm/init.c
@@ -69,15 +69,12 @@ int init_bootmem_done;
 int boot_mapsize;
 #ifdef CONFIG_PPC_PMAC
 unsigned long agp_special_page;
+EXPORT_SYMBOL(agp_special_page);
 #endif
 
 extern char _end[];
 extern char etext[], _stext[];
 extern char __init_begin, __init_end;
-extern char __prep_begin, __prep_end;
-extern char __chrp_begin, __chrp_end;
-extern char __pmac_begin, __pmac_end;
-extern char __openfirmware_begin, __openfirmware_end;
 
 #ifdef CONFIG_HIGHMEM
 pte_t *kmap_pte;
@@ -167,14 +164,6 @@ void free_initmem(void)
 
 	printk ("Freeing unused kernel memory:");
 	FREESEC(init);
-	if (_machine != _MACH_Pmac)
-		FREESEC(pmac);
-	if (_machine != _MACH_chrp)
-		FREESEC(chrp);
-	if (_machine != _MACH_prep)
-		FREESEC(prep);
-	if (!have_of)
-		FREESEC(openfirmware);
  	printk("\n");
 	ppc_md.progress = NULL;
 #undef FREESEC
@@ -608,21 +597,20 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
 
 	if (pfn_valid(pfn)) {
 		struct page *page = pfn_to_page(pfn);
-		if (!PageReserved(page)
-		    && !test_bit(PG_arch_1, &page->flags)) {
-			if (vma->vm_mm == current->active_mm) {
 #ifdef CONFIG_8xx
-			/* On 8xx, cache control instructions (particularly 
-		 	 * "dcbst" from flush_dcache_icache) fault as write 
-			 * operation if there is an unpopulated TLB entry 
-			 * for the address in question. To workaround that, 
-			 * we invalidate the TLB here, thus avoiding dcbst 
-			 * misbehaviour.
-			 */
-				_tlbie(address);
+		/* On 8xx, the TLB handlers work in 2 stages:
+	 	 * First, a zeroed entry is loaded by TLBMiss handler,
+		 * which causes the TLBError handler to be triggered.
+		 * That means the zeroed TLB has to be invalidated
+		 * whenever a page miss occurs.
+		 */
+		_tlbie(address);
 #endif
+		if (!PageReserved(page)
+		    && !test_bit(PG_arch_1, &page->flags)) {
+			if (vma->vm_mm == current->active_mm)
 				__flush_dcache_icache((void *) address);
-			} else
+			else
 				flush_dcache_icache_page(page);
 			set_bit(PG_arch_1, &page->flags);
 		}
@@ -648,18 +636,16 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
  */
 int page_is_ram(unsigned long pfn)
 {
-	unsigned long paddr = (pfn << PAGE_SHIFT);
-
-	return paddr < __pa(high_memory);
+	return pfn < max_pfn;
 }
 
-pgprot_t phys_mem_access_prot(struct file *file, unsigned long addr,
+pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 			      unsigned long size, pgprot_t vma_prot)
 {
 	if (ppc_md.phys_mem_access_prot)
-		return ppc_md.phys_mem_access_prot(file, addr, size, vma_prot);
+		return ppc_md.phys_mem_access_prot(file, pfn, size, vma_prot);
 
-	if (!page_is_ram(addr >> PAGE_SHIFT))
+	if (!page_is_ram(pfn))
 		vma_prot = __pgprot(pgprot_val(vma_prot)
 				    | _PAGE_GUARDED | _PAGE_NO_CACHE);
 	return vma_prot;
diff --git a/arch/ppc/mm/pgtable.c b/arch/ppc/mm/pgtable.c
index 81a3d7446d37..6ea9185fd120 100644
--- a/arch/ppc/mm/pgtable.c
+++ b/arch/ppc/mm/pgtable.c
@@ -114,9 +114,9 @@ struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address)
 	struct page *ptepage;
 
 #ifdef CONFIG_HIGHPTE
-	int flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_REPEAT;
+	gfp_t flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_REPEAT;
 #else
-	int flags = GFP_KERNEL | __GFP_REPEAT;
+	gfp_t flags = GFP_KERNEL | __GFP_REPEAT;
 #endif
 
 	ptepage = alloc_pages(flags, 0);
@@ -280,18 +280,16 @@ map_page(unsigned long va, phys_addr_t pa, int flags)
 	pte_t *pg;
 	int err = -ENOMEM;
 
-	spin_lock(&init_mm.page_table_lock);
 	/* Use upper 10 bits of VA to index the first level map */
 	pd = pmd_offset(pgd_offset_k(va), va);
 	/* Use middle 10 bits of VA to index the second-level map */
-	pg = pte_alloc_kernel(&init_mm, pd, va);
+	pg = pte_alloc_kernel(pd, va);
 	if (pg != 0) {
 		err = 0;
 		set_pte_at(&init_mm, va, pg, pfn_pte(pa >> PAGE_SHIFT, __pgprot(flags)));
 		if (mem_init_done)
 			flush_HPTE(0, va, pmd_val(*pd));
 	}
-	spin_unlock(&init_mm.page_table_lock);
 	return err;
 }
 
diff --git a/arch/ppc/oprofile/common.c b/arch/ppc/oprofile/common.c
deleted file mode 100644
index 3169c67abea7..000000000000
--- a/arch/ppc/oprofile/common.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * PPC 32 oprofile support
- * Based on PPC64 oprofile support
- * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
- *
- * Copyright (C) Freescale Semiconductor, Inc 2004
- *
- * Author: Andy Fleming
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/oprofile.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/errno.h>
-#include <asm/ptrace.h>
-#include <asm/system.h>
-#include <asm/perfmon.h>
-#include <asm/cputable.h>
-
-#include "op_impl.h"
-
-static struct op_ppc32_model *model;
-
-static struct op_counter_config ctr[OP_MAX_COUNTER];
-static struct op_system_config sys;
-
-static void op_handle_interrupt(struct pt_regs *regs)
-{
-	model->handle_interrupt(regs, ctr);
-}
-
-static int op_ppc32_setup(void)
-{
-	/* Install our interrupt handler into the existing hook.  */
-	if(request_perfmon_irq(&op_handle_interrupt))
-		return -EBUSY;
-
-	mb();
-
-	/* Pre-compute the values to stuff in the hardware registers.  */
-	model->reg_setup(ctr, &sys, model->num_counters);
-
-#if 0
-	/* FIXME: Make multi-cpu work */
-	/* Configure the registers on all cpus.  */
-	on_each_cpu(model->reg_setup, NULL, 0, 1);
-#endif
-
-	return 0;
-}
-
-static void op_ppc32_shutdown(void)
-{
-	mb();
-
-	/* Remove our interrupt handler. We may be removing this module. */
-	free_perfmon_irq();
-}
-
-static void op_ppc32_cpu_start(void *dummy)
-{
-	model->start(ctr);
-}
-
-static int op_ppc32_start(void)
-{
-	on_each_cpu(op_ppc32_cpu_start, NULL, 0, 1);
-	return 0;
-}
-
-static inline void op_ppc32_cpu_stop(void *dummy)
-{
-	model->stop();
-}
-
-static void op_ppc32_stop(void)
-{
-	on_each_cpu(op_ppc32_cpu_stop, NULL, 0, 1);
-}
-
-static int op_ppc32_create_files(struct super_block *sb, struct dentry *root)
-{
-	int i;
-
-	for (i = 0; i < model->num_counters; ++i) {
-		struct dentry *dir;
-		char buf[3];
-
-		snprintf(buf, sizeof buf, "%d", i);
-		dir = oprofilefs_mkdir(sb, root, buf);
-
-		oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
-		oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
-		oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
-		oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
-		oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
-
-		/* FIXME: Not sure if this is used */
-		oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask);
-	}
-
-	oprofilefs_create_ulong(sb, root, "enable_kernel", &sys.enable_kernel);
-	oprofilefs_create_ulong(sb, root, "enable_user", &sys.enable_user);
-
-	/* Default to tracing both kernel and user */
-	sys.enable_kernel = 1;
-	sys.enable_user = 1;
-
-	return 0;
-}
-
-static struct oprofile_operations oprof_ppc32_ops = {
-	.create_files	= op_ppc32_create_files,
-	.setup		= op_ppc32_setup,
-	.shutdown	= op_ppc32_shutdown,
-	.start		= op_ppc32_start,
-	.stop		= op_ppc32_stop,
-	.cpu_type	= NULL		/* To be filled in below. */
-};
-
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
-	char *name;
-	int cpu_id = smp_processor_id();
-
-#ifdef CONFIG_FSL_BOOKE
-	model = &op_model_fsl_booke;
-#else
-	return -ENODEV;
-#endif
-
-	name = kmalloc(32, GFP_KERNEL);
-
-	if (NULL == name)
-		return -ENOMEM;
-
-	sprintf(name, "ppc/%s", cur_cpu_spec[cpu_id]->cpu_name);
-
-	oprof_ppc32_ops.cpu_type = name;
-
-	model->num_counters = cur_cpu_spec[cpu_id]->num_pmcs;
-
-	*ops = oprof_ppc32_ops;
-
-	printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
-	       oprof_ppc32_ops.cpu_type);
-
-	return 0;
-}
-
-void oprofile_arch_exit(void)
-{
-	kfree(oprof_ppc32_ops.cpu_type);
-	oprof_ppc32_ops.cpu_type = NULL;
-}
diff --git a/arch/ppc/oprofile/op_impl.h b/arch/ppc/oprofile/op_impl.h
deleted file mode 100644
index bc336dc971e3..000000000000
--- a/arch/ppc/oprofile/op_impl.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
- *
- * Based on alpha version.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef OP_IMPL_H
-#define OP_IMPL_H 1
-
-#define OP_MAX_COUNTER 8
-
-/* Per-counter configuration as set via oprofilefs.  */
-struct op_counter_config {
-	unsigned long enabled;
-	unsigned long event;
-	unsigned long count;
-	unsigned long kernel;
-	unsigned long user;
-	unsigned long unit_mask;
-};
-
-/* System-wide configuration as set via oprofilefs.  */
-struct op_system_config {
-	unsigned long enable_kernel;
-	unsigned long enable_user;
-};
-
-/* Per-arch configuration */
-struct op_ppc32_model {
-	void (*reg_setup) (struct op_counter_config *,
-			   struct op_system_config *,
-			   int num_counters);
-	void (*start) (struct op_counter_config *);
-	void (*stop) (void);
-	void (*handle_interrupt) (struct pt_regs *,
-				  struct op_counter_config *);
-	int num_counters;
-};
-
-#endif /* OP_IMPL_H */
diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig
index 76f4476cab44..d8837911bbc6 100644
--- a/arch/ppc/platforms/4xx/Kconfig
+++ b/arch/ppc/platforms/4xx/Kconfig
@@ -82,6 +82,12 @@ config LUAN
 	help
 	  This option enables support for the IBM PPC440SP evaluation board.
 
+config YUCCA
+	bool "Yucca"
+	select WANT_EARLY_SERIAL
+	help
+	  This option enables support for the AMCC PPC440SPe evaluation board.
+
 config OCOTEA
 	bool "Ocotea"
 	select WANT_EARLY_SERIAL
@@ -124,9 +130,14 @@ config 440SP
 	depends on LUAN
 	default y
 
+config 440SPE
+	bool
+	depends on YUCCA
+	default y
+
 config 440
 	bool
-	depends on 440GP || 440SP || 440EP
+	depends on 440GP || 440SP || 440SPE || 440EP
 	default y
 
 config 440A
@@ -158,7 +169,7 @@ config BOOKE
 
 config IBM_OCP
 	bool
-	depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
+	depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
 	default y
 
 config XILINX_OCP
@@ -168,7 +179,7 @@ config XILINX_OCP
 
 config IBM_EMAC4
 	bool
-	depends on 440GX || 440SP
+	depends on 440GX || 440SP || 440SPE
 	default y
 
 config BIOS_FIXUP
@@ -214,7 +225,7 @@ config EMBEDDEDBOOT
 
 config IBM_OPENBIOS
 	bool
-	depends on ASH || BUBINGA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
+	depends on ASH || REDWOOD_5 || REDWOOD_6
 	default y
 
 config PPC4xx_DMA
diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile
index 1dd6d7fd6a9a..c9bb61170954 100644
--- a/arch/ppc/platforms/4xx/Makefile
+++ b/arch/ppc/platforms/4xx/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_EBONY)		+= ebony.o
 obj-$(CONFIG_EP405)		+= ep405.o
 obj-$(CONFIG_BUBINGA)		+= bubinga.o
 obj-$(CONFIG_LUAN)		+= luan.o
+obj-$(CONFIG_YUCCA)		+= yucca.o
 obj-$(CONFIG_OCOTEA)		+= ocotea.o
 obj-$(CONFIG_REDWOOD_5)		+= redwood5.o
 obj-$(CONFIG_REDWOOD_6)		+= redwood6.o
@@ -22,6 +23,7 @@ obj-$(CONFIG_440EP)		+= ibm440ep.o
 obj-$(CONFIG_440GP)		+= ibm440gp.o
 obj-$(CONFIG_440GX)		+= ibm440gx.o
 obj-$(CONFIG_440SP)		+= ibm440sp.o
+obj-$(CONFIG_440SPE)		+= ppc440spe.o
 obj-$(CONFIG_405EP)		+= ibm405ep.o
 obj-$(CONFIG_405GPR)		+= ibm405gpr.o
 obj-$(CONFIG_VIRTEX_II_PRO)	+= virtex-ii_pro.o
diff --git a/arch/ppc/platforms/4xx/bamboo.c b/arch/ppc/platforms/4xx/bamboo.c
index ac391d463d78..159b228eca1e 100644
--- a/arch/ppc/platforms/4xx/bamboo.c
+++ b/arch/ppc/platforms/4xx/bamboo.c
@@ -27,7 +27,6 @@
 #include <linux/delay.h>
 #include <linux/ide.h>
 #include <linux/initrd.h>
-#include <linux/irq.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
 #include <linux/tty.h>
@@ -52,7 +51,7 @@
 #include <syslib/gen550.h>
 #include <syslib/ibm440gx_common.h>
 
-bd_t __res;
+extern bd_t __res;
 
 static struct ibm44x_clocks clocks __initdata;
 
@@ -426,17 +425,7 @@ bamboo_setup_arch(void)
 void __init platform_init(unsigned long r3, unsigned long r4,
 		unsigned long r5, unsigned long r6, unsigned long r7)
 {
-	parse_bootinfo(find_bootinfo());
-
-	/*
-	 * If we were passed in a board information, copy it into the
-	 * residual data area.
-	 */
-	if (r3)
-		__res = *(bd_t *)(r3 + KERNELBASE);
-
-
-	ibm44x_platform_init();
+	ibm44x_platform_init(r3, r4, r5, r6, r7);
 
 	ppc_md.setup_arch = bamboo_setup_arch;
 	ppc_md.show_cpuinfo = bamboo_show_cpuinfo;
diff --git a/arch/ppc/platforms/4xx/bubinga.c b/arch/ppc/platforms/4xx/bubinga.c
index 3678abf86313..8110f55668c5 100644
--- a/arch/ppc/platforms/4xx/bubinga.c
+++ b/arch/ppc/platforms/4xx/bubinga.c
@@ -89,7 +89,7 @@ bubinga_early_serial_map(void)
           * by 16.
           */
 	uart_div = (mfdcr(DCRN_CPC0_UCR_BASE) & DCRN_CPC0_UCR_U0DIV);
-	uart_clock = __res.bi_pllouta_freq / uart_div;
+	uart_clock = __res.bi_procfreq / uart_div;
 
 	/* Setup serial port access */
 	memset(&port, 0, sizeof(port));
diff --git a/arch/ppc/platforms/4xx/bubinga.h b/arch/ppc/platforms/4xx/bubinga.h
index b1df856f8e22..b5380cfaf5c0 100644
--- a/arch/ppc/platforms/4xx/bubinga.h
+++ b/arch/ppc/platforms/4xx/bubinga.h
@@ -1,52 +1,34 @@
 /*
- * Support for IBM PPC 405EP evaluation board (Bubinga).
+ * arch/ppc/platforms/4xx/bubinga.h
  *
- * Author: SAW (IBM), derived from walnut.h.
- *         Maintained by MontaVista Software <source@mvista.com>
+ * Bubinga board definitions
+ *
+ * Copyright (c) 2005 DENX Software Engineering
+ * Stefan Roese <sr@denx.de>
+ *
+ * Based on original work by
+ *	SAW (IBM)
+ *	2003 (c) MontaVista Softare Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
  *
- * 2003 (c) MontaVista Softare Inc.  This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
  */
 
 #ifdef __KERNEL__
 #ifndef __BUBINGA_H__
 #define __BUBINGA_H__
 
-/* 405EP */
+#include <linux/config.h>
 #include <platforms/4xx/ibm405ep.h>
-
-#ifndef __ASSEMBLY__
-/*
- * Data structure defining board information maintained by the boot
- * ROM on IBM's evaluation board. An effort has been made to
- * keep the field names consistent with the 8xx 'bd_t' board info
- * structures.
- */
-
-typedef struct board_info {
-        unsigned char    bi_s_version[4];       /* Version of this structure */
-        unsigned char    bi_r_version[30];      /* Version of the IBM ROM */
-        unsigned int     bi_memsize;            /* DRAM installed, in bytes */
-        unsigned char    bi_enetaddr[2][6];     /* Local Ethernet MAC address */        unsigned char    bi_pci_enetaddr[6];    /* PCI Ethernet MAC address */
-        unsigned int     bi_intfreq;            /* Processor speed, in Hz */
-        unsigned int     bi_busfreq;            /* PLB Bus speed, in Hz */
-        unsigned int     bi_pci_busfreq;        /* PCI Bus speed, in Hz */
-        unsigned int     bi_opb_busfreq;        /* OPB Bus speed, in Hz */
-        unsigned int     bi_pllouta_freq;       /* PLL OUTA speed, in Hz */
-} bd_t;
-
-/* Some 4xx parts use a different timebase frequency from the internal clock.
-*/
-#define bi_tbfreq bi_intfreq
-
+#include <asm/ppcboot.h>
 
 /* Memory map for the Bubinga board.
  * Generic 4xx plus RTC.
  */
 
-extern void *bubinga_rtc_base;
 #define BUBINGA_RTC_PADDR	((uint)0xf0000000)
 #define BUBINGA_RTC_VADDR	BUBINGA_RTC_PADDR
 #define BUBINGA_RTC_SIZE	((uint)8*1024)
@@ -58,12 +40,18 @@ extern void *bubinga_rtc_base;
  * for typical configurations at various CPU speeds.
  * The base baud is calculated as (FWDA / EXT UART DIV / 16)
  */
-#define BASE_BAUD       0
+#define BASE_BAUD		0
 
-#define BUBINGA_FPGA_BASE      0xF0300000
+/* Flash */
+#define PPC40x_FPGA_BASE	0xF0300000
+#define PPC40x_FPGA_REG_OFFS	1	/* offset to flash map reg */
+#define PPC40x_FLASH_ONBD_N(x)	(x & 0x02)
+#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)
+#define PPC40x_FLASH_LOW	0xFFF00000
+#define PPC40x_FLASH_HIGH	0xFFF80000
+#define PPC40x_FLASH_SIZE	0x80000
 
-#define PPC4xx_MACHINE_NAME     "IBM Bubinga"
+#define PPC4xx_MACHINE_NAME	"IBM Bubinga"
 
-#endif /* !__ASSEMBLY__ */
 #endif /* __BUBINGA_H__ */
 #endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ebony.c b/arch/ppc/platforms/4xx/ebony.c
index d6b2b1965dcb..64ebae19cdbb 100644
--- a/arch/ppc/platforms/4xx/ebony.c
+++ b/arch/ppc/platforms/4xx/ebony.c
@@ -30,7 +30,6 @@
 #include <linux/delay.h>
 #include <linux/ide.h>
 #include <linux/initrd.h>
-#include <linux/irq.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
 #include <linux/tty.h>
@@ -55,7 +54,7 @@
 #include <syslib/gen550.h>
 #include <syslib/ibm440gp_common.h>
 
-bd_t __res;
+extern bd_t __res;
 
 static struct ibm44x_clocks clocks __initdata;
 
@@ -91,7 +90,7 @@ ebony_calibrate_decr(void)
 	 * on Rev. C silicon then errata forces us to
 	 * use the internal clock.
 	 */
-	if (strcmp(cur_cpu_spec[0]->cpu_name, "440GP Rev. B") == 0)
+	if (strcmp(cur_cpu_spec->cpu_name, "440GP Rev. B") == 0)
 		freq = EBONY_440GP_RB_SYSCLK;
 	else
 		freq = EBONY_440GP_RC_SYSCLK;
@@ -318,16 +317,7 @@ ebony_setup_arch(void)
 void __init platform_init(unsigned long r3, unsigned long r4,
 		unsigned long r5, unsigned long r6, unsigned long r7)
 {
-	parse_bootinfo(find_bootinfo());
-
-	/*
-	 * If we were passed in a board information, copy it into the
-	 * residual data area.
-	 */
-	if (r3)
-		__res = *(bd_t *)(r3 + KERNELBASE);
-
-	ibm44x_platform_init();
+	ibm44x_platform_init(r3, r4, r5, r6, r7);
 
 	ppc_md.setup_arch = ebony_setup_arch;
 	ppc_md.show_cpuinfo = ebony_show_cpuinfo;
diff --git a/arch/ppc/platforms/4xx/ebony.h b/arch/ppc/platforms/4xx/ebony.h
index d08faa46a0ae..b91ad4272dfe 100644
--- a/arch/ppc/platforms/4xx/ebony.h
+++ b/arch/ppc/platforms/4xx/ebony.h
@@ -24,8 +24,8 @@
 #define PPC44x_EMAC0_MR0	0xE0000800
 
 /* Where to find the MAC info */
-#define EBONY_OPENBIOS_MAC_BASE   0xfffffe0c
-#define EBONY_OPENBIOS_MAC_OFFSET 0x0c
+#define OPENBIOS_MAC_BASE	0xfffffe0c
+#define OPENBIOS_MAC_OFFSET	0x0c
 
 /* Default clock rates for Rev. B and Rev. C silicon */
 #define EBONY_440GP_RB_SYSCLK	33000000
diff --git a/arch/ppc/platforms/4xx/ibm440ep.c b/arch/ppc/platforms/4xx/ibm440ep.c
index 4712de8ff80f..65ac0b9c2d05 100644
--- a/arch/ppc/platforms/4xx/ibm440ep.c
+++ b/arch/ppc/platforms/4xx/ibm440ep.c
@@ -14,6 +14,7 @@
  */
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/platform_device.h>
 #include <platforms/4xx/ibm440ep.h>
 #include <asm/ocp.h>
 #include <asm/ppc4xx_pic.h>
diff --git a/arch/ppc/platforms/4xx/ibmstb4.c b/arch/ppc/platforms/4xx/ibmstb4.c
index d90627b68faa..7e33bb635443 100644
--- a/arch/ppc/platforms/4xx/ibmstb4.c
+++ b/arch/ppc/platforms/4xx/ibmstb4.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/platform_device.h>
 #include <asm/ocp.h>
 #include <asm/ppc4xx_pic.h>
 #include <platforms/4xx/ibmstb4.h>
diff --git a/arch/ppc/platforms/4xx/luan.c b/arch/ppc/platforms/4xx/luan.c
index a38e6f9ef858..d810b736d9bf 100644
--- a/arch/ppc/platforms/4xx/luan.c
+++ b/arch/ppc/platforms/4xx/luan.c
@@ -28,7 +28,6 @@
 #include <linux/delay.h>
 #include <linux/ide.h>
 #include <linux/initrd.h>
-#include <linux/irq.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
 #include <linux/tty.h>
@@ -53,7 +52,7 @@
 #include <syslib/ibm440gx_common.h>
 #include <syslib/ibm440sp_common.h>
 
-bd_t __res;
+extern bd_t __res;
 
 static struct ibm44x_clocks clocks __initdata;
 
@@ -356,16 +355,7 @@ luan_setup_arch(void)
 void __init platform_init(unsigned long r3, unsigned long r4,
 		unsigned long r5, unsigned long r6, unsigned long r7)
 {
-	parse_bootinfo(find_bootinfo());
-
-	/*
-	 * If we were passed in a board information, copy it into the
-	 * residual data area.
-	 */
-	if (r3)
-		__res = *(bd_t *)(r3 + KERNELBASE);
-
-	ibm44x_platform_init();
+	ibm44x_platform_init(r3, r4, r5, r6, r7);
 
 	ppc_md.setup_arch = luan_setup_arch;
 	ppc_md.show_cpuinfo = luan_show_cpuinfo;
diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c
index 80028df1b445..73b2c98158f6 100644
--- a/arch/ppc/platforms/4xx/ocotea.c
+++ b/arch/ppc/platforms/4xx/ocotea.c
@@ -28,7 +28,6 @@
 #include <linux/delay.h>
 #include <linux/ide.h>
 #include <linux/initrd.h>
-#include <linux/irq.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
 #include <linux/tty.h>
@@ -53,7 +52,7 @@
 #include <syslib/gen550.h>
 #include <syslib/ibm440gx_common.h>
 
-bd_t __res;
+extern bd_t __res;
 
 static struct ibm44x_clocks clocks __initdata;
 
@@ -287,6 +286,15 @@ ocotea_setup_arch(void)
 
 	ibm440gx_tah_enable();
 
+	/*
+	 * Determine various clocks.
+	 * To be completely correct we should get SysClk
+	 * from FPGA, because it can be changed by on-board switches
+	 * --ebs
+	 */
+	ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200);
+	ocp_sys_info.opb_bus_freq = clocks.opb;
+
 	/* Setup TODC access */
 	TODC_INIT(TODC_TYPE_DS1743,
 			0,
@@ -325,25 +333,7 @@ static void __init ocotea_init(void)
 void __init platform_init(unsigned long r3, unsigned long r4,
 		unsigned long r5, unsigned long r6, unsigned long r7)
 {
-	parse_bootinfo(find_bootinfo());
-
-	/*
-	 * If we were passed in a board information, copy it into the
-	 * residual data area.
-	 */
-	if (r3)
-		__res = *(bd_t *)(r3 + KERNELBASE);
-
-	/*
-	 * Determine various clocks.
-	 * To be completely correct we should get SysClk
-	 * from FPGA, because it can be changed by on-board switches
-	 * --ebs
-	 */
-	ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200);
-	ocp_sys_info.opb_bus_freq = clocks.opb;
-
-	ibm44x_platform_init();
+	ibm44x_platform_init(r3, r4, r5, r6, r7);
 
 	ppc_md.setup_arch = ocotea_setup_arch;
 	ppc_md.show_cpuinfo = ocotea_show_cpuinfo;
diff --git a/arch/ppc/platforms/4xx/ppc440spe.c b/arch/ppc/platforms/4xx/ppc440spe.c
new file mode 100644
index 000000000000..6139a0b3393e
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ppc440spe.c
@@ -0,0 +1,148 @@
+/*
+ * arch/ppc/platforms/4xx/ppc440spe.c
+ *
+ * PPC440SPe I/O descriptions
+ *
+ * Roland Dreier <rolandd@cisco.com>
+ * Copyright (c) 2005 Cisco Systems.  All rights reserved.
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2002-2005 MontaVista Software Inc.
+ *
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ * Copyright (c) 2003, 2004 Zultys Technologies
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <platforms/4xx/ppc440spe.h>
+#include <asm/ocp.h>
+#include <asm/ppc4xx_pic.h>
+
+static struct ocp_func_emac_data ppc440spe_emac0_def = {
+	.rgmii_idx	= -1,		/* No RGMII */
+	.rgmii_mux	= -1,		/* No RGMII */
+	.zmii_idx       = -1,           /* No ZMII */
+	.zmii_mux       = -1,           /* No ZMII */
+	.mal_idx        = 0,            /* MAL device index */
+	.mal_rx_chan    = 0,            /* MAL rx channel number */
+	.mal_tx_chan    = 0,            /* MAL tx channel number */
+	.wol_irq        = 61,  		/* WOL interrupt number */
+	.mdio_idx       = -1,           /* No shared MDIO */
+	.tah_idx	= -1,		/* No TAH */
+};
+OCP_SYSFS_EMAC_DATA()
+
+static struct ocp_func_mal_data ppc440spe_mal0_def = {
+	.num_tx_chans   = 1,    	/* Number of TX channels */
+	.num_rx_chans   = 1,    	/* Number of RX channels */
+	.txeob_irq	= 38,		/* TX End Of Buffer IRQ  */
+	.rxeob_irq	= 39,		/* RX End Of Buffer IRQ  */
+	.txde_irq	= 34,		/* TX Descriptor Error IRQ */
+	.rxde_irq	= 35,		/* RX Descriptor Error IRQ */
+	.serr_irq	= 33,		/* MAL System Error IRQ    */
+	.dcr_base	= DCRN_MAL_BASE /* MAL0_CFG DCR number */
+};
+OCP_SYSFS_MAL_DATA()
+
+static struct ocp_func_iic_data ppc440spe_iic0_def = {
+	.fast_mode	= 0,		/* Use standad mode (100Khz) */
+};
+
+static struct ocp_func_iic_data ppc440spe_iic1_def = {
+	.fast_mode	= 0,		/* Use standad mode (100Khz) */
+};
+OCP_SYSFS_IIC_DATA()
+
+struct ocp_def core_ocp[] = {
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_16550,
+	  .index	= 0,
+	  .paddr	= PPC440SPE_UART0_ADDR,
+	  .irq		= UART0_INT,
+	  .pm		= IBM_CPM_UART0,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_16550,
+	  .index	= 1,
+	  .paddr	= PPC440SPE_UART1_ADDR,
+	  .irq		= UART1_INT,
+	  .pm		= IBM_CPM_UART1,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_16550,
+	  .index	= 2,
+	  .paddr	= PPC440SPE_UART2_ADDR,
+	  .irq		= UART2_INT,
+	  .pm		= IBM_CPM_UART2,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_IIC,
+	  .index	= 0,
+	  .paddr	= 0x00000004f0000400ULL,
+	  .irq		= 2,
+	  .pm		= IBM_CPM_IIC0,
+	  .additions	= &ppc440spe_iic0_def,
+	  .show		= &ocp_show_iic_data
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_IIC,
+	  .index	= 1,
+	  .paddr	= 0x00000004f0000500ULL,
+	  .irq		= 3,
+	  .pm		= IBM_CPM_IIC1,
+	  .additions	= &ppc440spe_iic1_def,
+	  .show		= &ocp_show_iic_data
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_GPIO,
+	  .index	= 0,
+	  .paddr	= 0x00000004f0000700ULL,
+	  .irq		= OCP_IRQ_NA,
+	  .pm		= IBM_CPM_GPIO0,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_MAL,
+	  .paddr	= OCP_PADDR_NA,
+	  .irq		= OCP_IRQ_NA,
+	  .pm		= OCP_CPM_NA,
+	  .additions	= &ppc440spe_mal0_def,
+	  .show		= &ocp_show_mal_data,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_EMAC,
+	  .index	= 0,
+	  .paddr	= 0x00000004f0000800ULL,
+	  .irq		= 60,
+	  .pm		= OCP_CPM_NA,
+	  .additions	= &ppc440spe_emac0_def,
+	  .show		= &ocp_show_emac_data,
+	},
+	{ .vendor	= OCP_VENDOR_INVALID
+	}
+};
+
+/* Polarity and triggering settings for internal interrupt sources */
+struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
+	{ .polarity     = 0xffffffff,
+	  .triggering   = 0x010f0004,
+	  .ext_irq_mask = 0x00000000,
+	},
+	{ .polarity     = 0xffffffff,
+	  .triggering   = 0x001f8040,
+	  .ext_irq_mask = 0x00007c30,   /* IRQ6 - IRQ7, IRQ8 - IRQ12 */
+	},
+	{ .polarity     = 0xffffffff,
+	  .triggering   = 0x00000000,
+	  .ext_irq_mask = 0x000000fc,   /* IRQ0 - IRQ5 */
+	},
+	{ .polarity     = 0xffffffff,
+	  .triggering   = 0x00000000,
+	  .ext_irq_mask = 0x00000000,
+	},
+};
diff --git a/arch/ppc/platforms/4xx/ppc440spe.h b/arch/ppc/platforms/4xx/ppc440spe.h
new file mode 100644
index 000000000000..2216846973b8
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ppc440spe.h
@@ -0,0 +1,66 @@
+/*
+ * arch/ppc/platforms/4xx/ibm440spe.h
+ *
+ * PPC440SPe definitions
+ *
+ * Roland Dreier <rolandd@cisco.com>
+ * Copyright (c) 2005 Cisco Systems.  All rights reserved.
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2004-2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifdef __KERNEL__
+#ifndef __PPC_PLATFORMS_PPC440SPE_H
+#define __PPC_PLATFORMS_PPC440SPE_H
+
+#include <linux/config.h>
+
+#include <asm/ibm44x.h>
+
+/* UART */
+#define PPC440SPE_UART0_ADDR	0x00000004f0000200ULL
+#define PPC440SPE_UART1_ADDR	0x00000004f0000300ULL
+#define PPC440SPE_UART2_ADDR	0x00000004f0000600ULL
+#define UART0_INT		0
+#define UART1_INT		1
+#define UART2_INT		37
+
+/* Clock and Power Management */
+#define IBM_CPM_IIC0		0x80000000	/* IIC interface */
+#define IBM_CPM_IIC1		0x40000000	/* IIC interface */
+#define IBM_CPM_PCI		0x20000000	/* PCI bridge */
+#define IBM_CPM_CPU		    0x02000000	/* processor core */
+#define IBM_CPM_DMA		    0x01000000	/* DMA controller */
+#define IBM_CPM_BGO		    0x00800000	/* PLB to OPB bus arbiter */
+#define IBM_CPM_BGI		    0x00400000	/* OPB to PLB bridge */
+#define IBM_CPM_EBC		    0x00200000	/* External Bux Controller */
+#define IBM_CPM_EBM		    0x00100000	/* Ext Bus Master Interface */
+#define IBM_CPM_DMC		    0x00080000	/* SDRAM peripheral controller */
+#define IBM_CPM_PLB		    0x00040000	/* PLB bus arbiter */
+#define IBM_CPM_SRAM		0x00020000	/* SRAM memory controller */
+#define IBM_CPM_PPM		    0x00002000	/* PLB Performance Monitor */
+#define IBM_CPM_UIC1		0x00001000	/* Universal Interrupt Controller */
+#define IBM_CPM_GPIO0		0x00000800	/* General Purpose IO (??) */
+#define IBM_CPM_GPT		    0x00000400	/* General Purpose Timers  */
+#define IBM_CPM_UART0		0x00000200	/* serial port 0 */
+#define IBM_CPM_UART1		0x00000100	/* serial port 1 */
+#define IBM_CPM_UART2		0x00000100	/* serial port 1 */
+#define IBM_CPM_UIC0		0x00000080	/* Universal Interrupt Controller */
+#define IBM_CPM_TMRCLK		0x00000040	/* CPU timers */
+#define IBM_CPM_EMAC0  		0x00000020	/* EMAC 0     */
+
+#define DFLT_IBM4xx_PM		~(IBM_CPM_UIC | IBM_CPM_UIC1 | IBM_CPM_CPU \
+				| IBM_CPM_EBC | IBM_CPM_SRAM | IBM_CPM_BGO \
+				| IBM_CPM_EBM | IBM_CPM_PLB | IBM_CPM_OPB \
+				| IBM_CPM_TMRCLK | IBM_CPM_DMA | IBM_CPM_PCI \
+				| IBM_CPM_TAHOE0 | IBM_CPM_TAHOE1 \
+				| IBM_CPM_EMAC0 | IBM_CPM_EMAC1 \
+			  	| IBM_CPM_EMAC2 | IBM_CPM_EMAC3 )
+#endif /* __PPC_PLATFORMS_PPC440SP_H */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/redwood5.c b/arch/ppc/platforms/4xx/redwood5.c
index bee8b4ac8afd..611ac861804d 100644
--- a/arch/ppc/platforms/4xx/redwood5.c
+++ b/arch/ppc/platforms/4xx/redwood5.c
@@ -14,7 +14,7 @@
 #include <linux/config.h>
 #include <linux/init.h>
 #include <linux/pagemap.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/ioport.h>
 #include <asm/io.h>
 #include <asm/machdep.h>
diff --git a/arch/ppc/platforms/4xx/redwood6.c b/arch/ppc/platforms/4xx/redwood6.c
index 8b1012994dfc..b13116691289 100644
--- a/arch/ppc/platforms/4xx/redwood6.c
+++ b/arch/ppc/platforms/4xx/redwood6.c
@@ -12,7 +12,7 @@
 #include <linux/config.h>
 #include <linux/init.h>
 #include <linux/pagemap.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/ioport.h>
 #include <asm/io.h>
 #include <asm/ppc4xx_pic.h>
diff --git a/arch/ppc/platforms/4xx/sycamore.c b/arch/ppc/platforms/4xx/sycamore.c
index d8019eec4704..281b4a2ffb96 100644
--- a/arch/ppc/platforms/4xx/sycamore.c
+++ b/arch/ppc/platforms/4xx/sycamore.c
@@ -88,9 +88,6 @@ ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
 void __init
 sycamore_setup_arch(void)
 {
-#define SYCAMORE_PS2_BASE	0xF0100000
-#define SYCAMORE_FPGA_BASE	0xF0300000
-
 	void *fpga_brdc;
 	unsigned char fpga_brdc_data;
 	void *fpga_enable;
@@ -100,7 +97,7 @@ sycamore_setup_arch(void)
 
 	ppc4xx_setup_arch();
 
-	ibm_ocp_set_emac(0, 1);
+	ibm_ocp_set_emac(0, 0);
 
 	kb_data = ioremap(SYCAMORE_PS2_BASE, 8);
 	if (!kb_data) {
@@ -111,7 +108,7 @@ sycamore_setup_arch(void)
 
 	kb_cs = kb_data + 1;
 
-	fpga_status = ioremap(SYCAMORE_FPGA_BASE, 8);
+	fpga_status = ioremap(PPC40x_FPGA_BASE, 8);
 	if (!fpga_status) {
 		printk(KERN_CRIT
 		       "sycamore_setup_arch() fpga_status ioremap failed\n");
diff --git a/arch/ppc/platforms/4xx/sycamore.h b/arch/ppc/platforms/4xx/sycamore.h
index 3e7b4e2c8c57..1cd6c824fd62 100644
--- a/arch/ppc/platforms/4xx/sycamore.h
+++ b/arch/ppc/platforms/4xx/sycamore.h
@@ -1,67 +1,52 @@
 /*
  * arch/ppc/platforms/4xx/sycamore.h
  *
- * Macros, definitions, and data structures specific to the IBM PowerPC
- * 405GPr "Sycamore" evaluation board.
+ * Sycamore board definitions
  *
- * Author: Armin Kuster <akuster@mvista.com>
+ * Copyright (c) 2005 DENX Software Engineering
+ * Stefan Roese <sr@denx.de>
+ *
+ * Based on original work by
+ * 	Armin Kuster <akuster@mvista.com>
+ *	2000 (c) MontaVista, Software, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
  *
- * 2000 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
  */
 
 #ifdef __KERNEL__
 #ifndef __ASM_SYCAMORE_H__
 #define __ASM_SYCAMORE_H__
 
+#include <linux/config.h>
 #include <platforms/4xx/ibm405gpr.h>
+#include <asm/ppcboot.h>
 
-#ifndef __ASSEMBLY__
-/*
- * Data structure defining board information maintained by the boot
- * ROM on IBM's "Sycamore" evaluation board. An effort has been made to
- * keep the field names consistent with the 8xx 'bd_t' board info
- * structures.
- */
-
-typedef struct board_info {
-	unsigned char	 bi_s_version[4];	/* Version of this structure */
-	unsigned char	 bi_r_version[30];	/* Version of the IBM ROM */
-	unsigned int	 bi_memsize;		/* DRAM installed, in bytes */
-	unsigned char	 bi_enetaddr[6];	/* Local Ethernet MAC address */
-	unsigned char	 bi_pci_enetaddr[6];	/* PCI Ethernet MAC address */
-	unsigned int	 bi_intfreq;		/* Processor speed, in Hz */
-	unsigned int	 bi_busfreq;		/* PLB Bus speed, in Hz */
-	unsigned int	 bi_pci_busfreq;	/* PCI Bus speed, in Hz */
-} bd_t;
-
-/* Some 4xx parts use a different timebase frequency from the internal clock.
-*/
-#define bi_tbfreq bi_intfreq
-
-
-/* Memory map for the IBM "Sycamore" 405GP evaluation board.
+/* Memory map for the IBM "Sycamore" 405GPr evaluation board.
  * Generic 4xx plus RTC.
  */
 
-extern void *sycamore_rtc_base;
 #define SYCAMORE_RTC_PADDR	((uint)0xf0000000)
 #define SYCAMORE_RTC_VADDR	SYCAMORE_RTC_PADDR
-#define SYCAMORE_RTC_SIZE		((uint)8*1024)
+#define SYCAMORE_RTC_SIZE	((uint)8*1024)
 
-#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK
-#define BASE_BAUD		201600
-#else
 #define BASE_BAUD		691200
-#endif
 
-#define SYCAMORE_PS2_BASE		0xF0100000
-#define SYCAMORE_FPGA_BASE	0xF0300000
+#define SYCAMORE_PS2_BASE	0xF0100000
+
+/* Flash */
+#define PPC40x_FPGA_BASE	0xF0300000
+#define PPC40x_FPGA_REG_OFFS	5	/* offset to flash map reg */
+#define PPC40x_FLASH_ONBD_N(x)	(x & 0x02)
+#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)
+#define PPC40x_FLASH_LOW	0xFFF00000
+#define PPC40x_FLASH_HIGH	0xFFF80000
+#define PPC40x_FLASH_SIZE	0x80000
 
 #define PPC4xx_MACHINE_NAME	"IBM Sycamore"
 
-#endif /* !__ASSEMBLY__ */
 #endif /* __ASM_SYCAMORE_H__ */
 #endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/walnut.c b/arch/ppc/platforms/4xx/walnut.c
index a33eda4b7489..74cb33182d9f 100644
--- a/arch/ppc/platforms/4xx/walnut.c
+++ b/arch/ppc/platforms/4xx/walnut.c
@@ -90,7 +90,7 @@ walnut_setup_arch(void)
 
 	kb_cs = kb_data + 1;
 
-	fpga_status = ioremap(WALNUT_FPGA_BASE, 8);
+	fpga_status = ioremap(PPC40x_FPGA_BASE, 8);
 	if (!fpga_status) {
 		printk(KERN_CRIT
 		       "walnut_setup_arch() fpga_status ioremap failed\n");
diff --git a/arch/ppc/platforms/4xx/walnut.h b/arch/ppc/platforms/4xx/walnut.h
index 04cfbf3696b9..dcf2691698c0 100644
--- a/arch/ppc/platforms/4xx/walnut.h
+++ b/arch/ppc/platforms/4xx/walnut.h
@@ -1,72 +1,55 @@
 /*
  * arch/ppc/platforms/4xx/walnut.h
  *
- * Macros, definitions, and data structures specific to the IBM PowerPC
- * 405GP "Walnut" evaluation board.
+ * Walnut board definitions
  *
- * Authors: Grant Erickson <grant@lcse.umn.edu>, Frank Rowand
- * <frank_rowand@mvista.com>, Debbie Chu <debbie_chu@mvista.com> or
- * source@mvista.com
+ * Copyright (c) 2005 DENX Software Engineering
+ * Stefan Roese <sr@denx.de>
  *
- * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ * Based on original work by
+ * 	Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ *	Frank Rowand <frank_rowand@mvista.com>
+ *	Debbie Chu <debbie_chu@mvista.com>
+ *	2000 (c) MontaVista, Software, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
  *
- * 2000 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
  */
 
 #ifdef __KERNEL__
 #ifndef __ASM_WALNUT_H__
 #define __ASM_WALNUT_H__
 
-/* We have a 405GP core */
+#include <linux/config.h>
 #include <platforms/4xx/ibm405gp.h>
-
-#ifndef __ASSEMBLY__
-/*
- * Data structure defining board information maintained by the boot
- * ROM on IBM's "Walnut" evaluation board. An effort has been made to
- * keep the field names consistent with the 8xx 'bd_t' board info
- * structures.
- */
-
-typedef struct board_info {
-	unsigned char	 bi_s_version[4];	/* Version of this structure */
-	unsigned char	 bi_r_version[30];	/* Version of the IBM ROM */
-	unsigned int	 bi_memsize;		/* DRAM installed, in bytes */
-	unsigned char	 bi_enetaddr[6];	/* Local Ethernet MAC address */
-	unsigned char	 bi_pci_enetaddr[6];	/* PCI Ethernet MAC address */
-	unsigned int	 bi_intfreq;		/* Processor speed, in Hz */
-	unsigned int	 bi_busfreq;		/* PLB Bus speed, in Hz */
-	unsigned int	 bi_pci_busfreq;	/* PCI Bus speed, in Hz */
-} bd_t;
-
-/* Some 4xx parts use a different timebase frequency from the internal clock.
-*/
-#define bi_tbfreq bi_intfreq
-
+#include <asm/ppcboot.h>
 
 /* Memory map for the IBM "Walnut" 405GP evaluation board.
  * Generic 4xx plus RTC.
  */
 
-extern void *walnut_rtc_base;
 #define WALNUT_RTC_PADDR	((uint)0xf0000000)
 #define WALNUT_RTC_VADDR	WALNUT_RTC_PADDR
 #define WALNUT_RTC_SIZE		((uint)8*1024)
 
-#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK
-#define BASE_BAUD		201600
-#else
 #define BASE_BAUD		691200
-#endif
 
 #define WALNUT_PS2_BASE		0xF0100000
-#define WALNUT_FPGA_BASE	0xF0300000
+
+/* Flash */
+#define PPC40x_FPGA_BASE	0xF0300000
+#define PPC40x_FPGA_REG_OFFS	5	/* offset to flash map reg */
+#define PPC40x_FLASH_ONBD_N(x)	(x & 0x02)
+#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)
+#define PPC40x_FLASH_LOW	0xFFF00000
+#define PPC40x_FLASH_HIGH	0xFFF80000
+#define PPC40x_FLASH_SIZE	0x80000
+#define WALNUT_FPGA_BASE	PPC40x_FPGA_BASE
 
 #define PPC4xx_MACHINE_NAME	"IBM Walnut"
 
-#endif /* !__ASSEMBLY__ */
 #endif /* __ASM_WALNUT_H__ */
 #endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/yucca.c b/arch/ppc/platforms/4xx/yucca.c
new file mode 100644
index 000000000000..e60f4bd437ec
--- /dev/null
+++ b/arch/ppc/platforms/4xx/yucca.c
@@ -0,0 +1,395 @@
+/*
+ * arch/ppc/platforms/4xx/yucca.c
+ *
+ * Yucca board specific routines
+ *
+ * Roland Dreier <rolandd@cisco.com> (based on luan.c by Matt Porter)
+ *
+ * Copyright 2004-2005 MontaVista Software Inc.
+ * Copyright (c) 2005 Cisco Systems.  All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/types.h>
+#include <linux/major.h>
+#include <linux/blkdev.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/ide.h>
+#include <linux/initrd.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ocp.h>
+#include <asm/pci-bridge.h>
+#include <asm/time.h>
+#include <asm/todc.h>
+#include <asm/bootinfo.h>
+#include <asm/ppc4xx_pic.h>
+#include <asm/ppcboot.h>
+
+#include <syslib/ibm44x_common.h>
+#include <syslib/ibm440gx_common.h>
+#include <syslib/ibm440sp_common.h>
+#include <syslib/ppc440spe_pcie.h>
+
+extern bd_t __res;
+
+static struct ibm44x_clocks clocks __initdata;
+
+static void __init
+yucca_calibrate_decr(void)
+{
+	unsigned int freq;
+
+	if (mfspr(SPRN_CCR1) & CCR1_TCS)
+		freq = YUCCA_TMR_CLK;
+	else
+		freq = clocks.cpu;
+
+	ibm44x_calibrate_decr(freq);
+}
+
+static int
+yucca_show_cpuinfo(struct seq_file *m)
+{
+	seq_printf(m, "vendor\t\t: AMCC\n");
+	seq_printf(m, "machine\t\t: PPC440SPe EVB (Yucca)\n");
+
+	return 0;
+}
+
+static enum {
+	HOSE_UNKNOWN,
+	HOSE_PCIX,
+	HOSE_PCIE0,
+	HOSE_PCIE1,
+	HOSE_PCIE2
+} hose_type[4];
+
+static inline int
+yucca_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+	struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
+
+	if (hose_type[hose->index] == HOSE_PCIX) {
+		static char pci_irq_table[][4] =
+		/*
+		 *	PCI IDSEL/INTPIN->INTLINE
+		 *	  A   B   C   D
+		 */
+		{
+			{ 81, -1, -1, -1 },	/* IDSEL 1 - PCIX0 Slot 0 */
+		};
+		const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4;
+		return PCI_IRQ_TABLE_LOOKUP;
+	} else if (hose_type[hose->index] == HOSE_PCIE0) {
+		static char pci_irq_table[][4] =
+		/*
+		 *	PCI IDSEL/INTPIN->INTLINE
+		 *	  A   B   C   D
+		 */
+		{
+			{ 96, 97, 98, 99 },
+		};
+		const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4;
+		return PCI_IRQ_TABLE_LOOKUP;
+	} else if (hose_type[hose->index] == HOSE_PCIE1) {
+		static char pci_irq_table[][4] =
+		/*
+		 *	PCI IDSEL/INTPIN->INTLINE
+		 *	  A   B   C   D
+		 */
+		{
+			{ 100, 101, 102, 103 },
+		};
+		const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4;
+		return PCI_IRQ_TABLE_LOOKUP;
+	} else if (hose_type[hose->index] == HOSE_PCIE2) {
+		static char pci_irq_table[][4] =
+		/*
+		 *	PCI IDSEL/INTPIN->INTLINE
+		 *	  A   B   C   D
+		 */
+		{
+			{ 104, 105, 106, 107 },
+		};
+		const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4;
+		return PCI_IRQ_TABLE_LOOKUP;
+	}
+	return -1;
+}
+
+static void __init yucca_set_emacdata(void)
+{
+	struct ocp_def *def;
+	struct ocp_func_emac_data *emacdata;
+
+	/* Set phy_map, phy_mode, and mac_addr for the EMAC */
+	def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0);
+	emacdata = def->additions;
+	emacdata->phy_map = 0x00000001;	/* Skip 0x00 */
+	emacdata->phy_mode = PHY_MODE_GMII;
+	memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
+}
+
+static int __init yucca_pcie_card_present(int port)
+{
+   void __iomem *pcie_fpga_base;
+   u16 reg;
+
+   pcie_fpga_base = ioremap64(YUCCA_FPGA_REG_BASE, YUCCA_FPGA_REG_SIZE);
+   reg = in_be16(pcie_fpga_base + FPGA_REG1C);
+   iounmap(pcie_fpga_base);
+
+   switch(port) {
+   case 0: return !(reg & FPGA_REG1C_PE0_PRSNT);
+   case 1: return !(reg & FPGA_REG1C_PE1_PRSNT);
+   case 2: return !(reg & FPGA_REG1C_PE2_PRSNT);
+   default: return 0;
+   }
+}
+
+/*
+ * For the given slot, set rootpoint mode, send power to the slot,
+ * turn on the green LED and turn off the yellow LED, enable the clock
+ * and turn off reset.
+ */
+static void __init yucca_setup_pcie_fpga_rootpoint(int port)
+{
+	void __iomem *pcie_reg_fpga_base;
+	u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint;
+
+	pcie_reg_fpga_base = ioremap64(YUCCA_FPGA_REG_BASE, YUCCA_FPGA_REG_SIZE);
+
+	switch(port) {
+	case 0:
+		rootpoint   = FPGA_REG1C_PE0_ROOTPOINT;
+		endpoint    = 0;
+		power 	    = FPGA_REG1A_PE0_PWRON;
+		green_led   = FPGA_REG1A_PE0_GLED;
+		clock 	    = FPGA_REG1A_PE0_REFCLK_ENABLE;
+		yellow_led  = FPGA_REG1A_PE0_YLED;
+		reset_off   = FPGA_REG1C_PE0_PERST;
+		break;
+	case 1:
+		rootpoint   = 0;
+		endpoint    = FPGA_REG1C_PE1_ENDPOINT;
+		power 	    = FPGA_REG1A_PE1_PWRON;
+		green_led   = FPGA_REG1A_PE1_GLED;
+		clock 	    = FPGA_REG1A_PE1_REFCLK_ENABLE;
+		yellow_led  = FPGA_REG1A_PE1_YLED;
+		reset_off   = FPGA_REG1C_PE1_PERST;
+		break;
+	case 2:
+		rootpoint   = 0;
+		endpoint    = FPGA_REG1C_PE2_ENDPOINT;
+		power 	    = FPGA_REG1A_PE2_PWRON;
+		green_led   = FPGA_REG1A_PE2_GLED;
+		clock 	    = FPGA_REG1A_PE2_REFCLK_ENABLE;
+		yellow_led  = FPGA_REG1A_PE2_YLED;
+		reset_off   = FPGA_REG1C_PE2_PERST;
+		break;
+
+	default:
+		return;
+	}
+
+	out_be16(pcie_reg_fpga_base + FPGA_REG1A,
+		 ~(power | clock | green_led) &
+		 (yellow_led | in_be16(pcie_reg_fpga_base + FPGA_REG1A)));
+	out_be16(pcie_reg_fpga_base + FPGA_REG1C,
+		 ~(endpoint | reset_off) &
+		 (rootpoint | in_be16(pcie_reg_fpga_base + FPGA_REG1C)));
+
+	/*
+	 * Leave device in reset for a while after powering on the
+	 * slot to give it a chance to initialize.
+	 */
+	mdelay(250);
+
+	out_be16(pcie_reg_fpga_base + FPGA_REG1C,
+		 reset_off | in_be16(pcie_reg_fpga_base + FPGA_REG1C));
+
+	iounmap(pcie_reg_fpga_base);
+}
+
+static void __init
+yucca_setup_hoses(void)
+{
+	struct pci_controller *hose;
+	char name[20];
+	int i;
+
+	if (0 && ppc440spe_init_pcie()) {
+		printk(KERN_WARNING "PPC440SPe PCI Express initialization failed\n");
+		return;
+	}
+
+	for (i = 0; i <= 2; ++i) {
+		if (!yucca_pcie_card_present(i))
+			continue;
+
+		printk(KERN_INFO "PCIE%d: card present\n", i);
+		yucca_setup_pcie_fpga_rootpoint(i);
+		if (ppc440spe_init_pcie_rootport(i)) {
+			printk(KERN_WARNING "PCIE%d: initialization failed\n", i);
+			continue;
+		}
+
+		hose = pcibios_alloc_controller();
+		if (!hose)
+			return;
+
+		sprintf(name, "PCIE%d host bridge", i);
+		pci_init_resource(&hose->io_resource,
+				  YUCCA_PCIX_LOWER_IO,
+				  YUCCA_PCIX_UPPER_IO,
+				  IORESOURCE_IO,
+				  name);
+
+		hose->mem_space.start = YUCCA_PCIE_LOWER_MEM +
+			i * YUCCA_PCIE_MEM_SIZE;
+		hose->mem_space.end   = hose->mem_space.start +
+			YUCCA_PCIE_MEM_SIZE - 1;
+
+		pci_init_resource(&hose->mem_resources[0],
+				  hose->mem_space.start,
+				  hose->mem_space.end,
+				  IORESOURCE_MEM,
+				  name);
+
+		hose->first_busno = 0;
+		hose->last_busno  = 15;
+		hose_type[hose->index] = HOSE_PCIE0 + i;
+
+		ppc440spe_setup_pcie(hose, i);
+		hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
+	}
+
+	ppc_md.pci_swizzle = common_swizzle;
+	ppc_md.pci_map_irq = yucca_map_irq;
+}
+
+TODC_ALLOC();
+
+static void __init
+yucca_early_serial_map(void)
+{
+	struct uart_port port;
+
+	/* Setup ioremapped serial port access */
+	memset(&port, 0, sizeof(port));
+	port.membase = ioremap64(PPC440SPE_UART0_ADDR, 8);
+	port.irq = UART0_INT;
+	port.uartclk = clocks.uart0;
+	port.regshift = 0;
+	port.iotype = SERIAL_IO_MEM;
+	port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+	port.line = 0;
+
+	if (early_serial_setup(&port) != 0) {
+		printk("Early serial init of port 0 failed\n");
+	}
+
+	port.membase = ioremap64(PPC440SPE_UART1_ADDR, 8);
+	port.irq = UART1_INT;
+	port.uartclk = clocks.uart1;
+	port.line = 1;
+
+	if (early_serial_setup(&port) != 0) {
+		printk("Early serial init of port 1 failed\n");
+	}
+
+	port.membase = ioremap64(PPC440SPE_UART2_ADDR, 8);
+	port.irq = UART2_INT;
+	port.uartclk = BASE_BAUD;
+	port.line = 2;
+
+	if (early_serial_setup(&port) != 0) {
+		printk("Early serial init of port 2 failed\n");
+	}
+}
+
+static void __init
+yucca_setup_arch(void)
+{
+	yucca_set_emacdata();
+
+#if !defined(CONFIG_BDI_SWITCH)
+	/*
+	 * The Abatron BDI JTAG debugger does not tolerate others
+	 * mucking with the debug registers.
+	 */
+	mtspr(SPRN_DBCR0, (DBCR0_TDE | DBCR0_IDM));
+#endif
+
+	/*
+	 * Determine various clocks.
+	 * To be completely correct we should get SysClk
+	 * from FPGA, because it can be changed by on-board switches
+	 * --ebs
+	 */
+	/* 440GX and 440SPe clocking is the same - rd */
+	ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200);
+	ocp_sys_info.opb_bus_freq = clocks.opb;
+
+	/* init to some ~sane value until calibrate_delay() runs */
+	loops_per_jiffy = 50000000/HZ;
+
+	/* Setup PCIXn host bridges */
+	yucca_setup_hoses();
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (initrd_start)
+		ROOT_DEV = Root_RAM0;
+	else
+#endif
+#ifdef CONFIG_ROOT_NFS
+		ROOT_DEV = Root_NFS;
+#else
+		ROOT_DEV = Root_HDA1;
+#endif
+
+	yucca_early_serial_map();
+
+	/* Identify the system */
+	printk("Yucca port (Roland Dreier <rolandd@cisco.com>)\n");
+}
+
+void __init platform_init(unsigned long r3, unsigned long r4,
+		unsigned long r5, unsigned long r6, unsigned long r7)
+{
+	ibm44x_platform_init(r3, r4, r5, r6, r7);
+
+	ppc_md.setup_arch = yucca_setup_arch;
+	ppc_md.show_cpuinfo = yucca_show_cpuinfo;
+	ppc_md.find_end_of_memory = ibm440sp_find_end_of_memory;
+	ppc_md.get_irq = NULL;		/* Set in ppc4xx_pic_init() */
+
+	ppc_md.calibrate_decr = yucca_calibrate_decr;
+#ifdef CONFIG_KGDB
+	ppc_md.early_serial_map = yucca_early_serial_map;
+#endif
+}
diff --git a/arch/ppc/platforms/4xx/yucca.h b/arch/ppc/platforms/4xx/yucca.h
new file mode 100644
index 000000000000..01a4afea1514
--- /dev/null
+++ b/arch/ppc/platforms/4xx/yucca.h
@@ -0,0 +1,111 @@
+/*
+ * arch/ppc/platforms/4xx/yucca.h
+ *
+ * Yucca board definitions
+ *
+ * Roland Dreier <rolandd@cisco.com> (based on luan.h by Matt Porter)
+ *
+ * Copyright 2004-2005 MontaVista Software Inc.
+ * Copyright (c) 2005 Cisco Systems.  All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_YUCCA_H__
+#define __ASM_YUCCA_H__
+
+#include <linux/config.h>
+#include <platforms/4xx/ppc440spe.h>
+
+/* F/W TLB mapping used in bootloader glue to reset EMAC */
+#define PPC44x_EMAC0_MR0	0xa0000800
+
+/* Location of MAC addresses in PIBS image */
+#define PIBS_FLASH_BASE		0xffe00000
+#define PIBS_MAC_BASE		(PIBS_FLASH_BASE+0x1b0400)
+
+/* External timer clock frequency */
+#define YUCCA_TMR_CLK		25000000
+
+/*
+ * FPGA registers
+ */
+#define YUCCA_FPGA_REG_BASE			0x00000004e2000000ULL
+#define YUCCA_FPGA_REG_SIZE			0x24
+
+#define FPGA_REG1A				0x1a
+
+#define FPGA_REG1A_PE0_GLED			0x8000
+#define FPGA_REG1A_PE1_GLED			0x4000
+#define FPGA_REG1A_PE2_GLED			0x2000
+#define FPGA_REG1A_PE0_YLED			0x1000
+#define FPGA_REG1A_PE1_YLED			0x0800
+#define FPGA_REG1A_PE2_YLED			0x0400
+#define FPGA_REG1A_PE0_PWRON			0x0200
+#define FPGA_REG1A_PE1_PWRON			0x0100
+#define FPGA_REG1A_PE2_PWRON			0x0080
+#define FPGA_REG1A_PE0_REFCLK_ENABLE		0x0040
+#define FPGA_REG1A_PE1_REFCLK_ENABLE		0x0020
+#define FPGA_REG1A_PE2_REFCLK_ENABLE		0x0010
+#define FPGA_REG1A_PE_SPREAD0			0x0008
+#define FPGA_REG1A_PE_SPREAD1			0x0004
+#define FPGA_REG1A_PE_SELSOURCE_0		0x0002
+#define FPGA_REG1A_PE_SELSOURCE_1		0x0001
+
+#define FPGA_REG1C				0x1c
+
+#define FPGA_REG1C_PE0_ROOTPOINT		0x8000
+#define FPGA_REG1C_PE1_ENDPOINT			0x4000
+#define FPGA_REG1C_PE2_ENDPOINT			0x2000
+#define FPGA_REG1C_PE0_PRSNT			0x1000
+#define FPGA_REG1C_PE1_PRSNT			0x0800
+#define FPGA_REG1C_PE2_PRSNT			0x0400
+#define FPGA_REG1C_PE0_WAKE			0x0080
+#define FPGA_REG1C_PE1_WAKE			0x0040
+#define FPGA_REG1C_PE2_WAKE			0x0020
+#define FPGA_REG1C_PE0_PERST			0x0010
+#define FPGA_REG1C_PE1_PERST			0x0008
+#define FPGA_REG1C_PE2_PERST			0x0004
+
+/*
+ * Serial port defines
+ */
+#define RS_TABLE_SIZE	3
+
+/* PIBS defined UART mappings, used before early_serial_setup */
+#define UART0_IO_BASE	0xa0000200
+#define UART1_IO_BASE	0xa0000300
+#define UART2_IO_BASE	0xa0000600
+
+#define BASE_BAUD	11059200
+#define STD_UART_OP(num)					\
+	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
+		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
+		iomem_base: (void*)UART##num##_IO_BASE,		\
+		io_type: SERIAL_IO_MEM},
+
+#define SERIAL_PORT_DFNS	\
+	STD_UART_OP(0)		\
+	STD_UART_OP(1)		\
+	STD_UART_OP(2)
+
+/* PCI support */
+#define YUCCA_PCIX_LOWER_IO	0x00000000
+#define YUCCA_PCIX_UPPER_IO	0x0000ffff
+#define YUCCA_PCIX_LOWER_MEM	0x80000000
+#define YUCCA_PCIX_UPPER_MEM	0x8fffffff
+#define YUCCA_PCIE_LOWER_MEM	0x90000000
+#define YUCCA_PCIE_MEM_SIZE	0x10000000
+
+#define YUCCA_PCIX_MEM_SIZE	0x10000000
+#define YUCCA_PCIX_MEM_OFFSET	0x00000000
+#define YUCCA_PCIE_MEM_SIZE	0x10000000
+#define YUCCA_PCIE_MEM_OFFSET	0x00000000
+
+#endif				/* __ASM_YUCCA_H__ */
+#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.c b/arch/ppc/platforms/83xx/mpc834x_sys.c
index b38a851a64ec..04bdc39bf47b 100644
--- a/arch/ppc/platforms/83xx/mpc834x_sys.c
+++ b/arch/ppc/platforms/83xx/mpc834x_sys.c
@@ -3,7 +3,7 @@
  *
  * MPC834x SYS board specific routines
  *
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
  *
  * Copyright 2005 Freescale Semiconductor Inc.
  *
@@ -24,7 +24,6 @@
 #include <linux/major.h>
 #include <linux/console.h>
 #include <linux/delay.h>
-#include <linux/irq.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
 #include <linux/serial.h>
@@ -52,6 +51,9 @@
 
 #include <syslib/ppc83xx_setup.h>
 
+static const char *GFAR_PHY_0 = "phy0:0";
+static const char *GFAR_PHY_1 = "phy0:1";
+
 #ifndef CONFIG_PCI
 unsigned long isa_io_base = 0;
 unsigned long isa_mem_base = 0;
@@ -71,12 +73,19 @@ mpc83xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
 	     *       A      B      C      D
 	     */
 	{
-		{PIRQA, PIRQB,  PIRQC,  PIRQD}, /* idsel 0x11 */
-		{PIRQC, PIRQD,  PIRQA,  PIRQB}, /* idsel 0x12 */
-		{PIRQD, PIRQA,  PIRQB,  PIRQC}  /* idsel 0x13 */
+		{PIRQA, PIRQB, PIRQC, PIRQD},	/* idsel 0x11 */
+		{PIRQC, PIRQD, PIRQA, PIRQB},	/* idsel 0x12 */
+		{PIRQD, PIRQA, PIRQB, PIRQC},	/* idsel 0x13 */
+		{0, 0, 0, 0},
+		{PIRQA, PIRQB, PIRQC, PIRQD},	/* idsel 0x15 */
+		{PIRQD, PIRQA, PIRQB, PIRQC},	/* idsel 0x16 */
+		{PIRQC, PIRQD, PIRQA, PIRQB},	/* idsel 0x17 */
+		{PIRQB, PIRQC, PIRQD, PIRQA},	/* idsel 0x18 */
+		{0, 0, 0, 0},			/* idsel 0x19 */
+		{0, 0, 0, 0},			/* idsel 0x20 */
 	};
 
-	const long min_idsel = 0x11, max_idsel = 0x13, irqs_per_slot = 4;
+	const long min_idsel = 0x11, max_idsel = 0x20, irqs_per_slot = 4;
 	return PCI_IRQ_TABLE_LOOKUP;
 }
 
@@ -98,6 +107,7 @@ mpc834x_sys_setup_arch(void)
 	bd_t *binfo = (bd_t *) __res;
 	unsigned int freq;
 	struct gianfar_platform_data *pdata;
+	struct gianfar_mdio_data *mdata;
 
 	/* get the core frequency */
 	freq = binfo->bi_intfreq;
@@ -112,24 +122,27 @@ mpc834x_sys_setup_arch(void)
 #endif
 	mpc83xx_early_serial_map();
 
+	/* setup the board related info for the MDIO bus */
+	mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC83xx_MDIO);
+
+	mdata->irq[0] = MPC83xx_IRQ_EXT1;
+	mdata->irq[1] = MPC83xx_IRQ_EXT2;
+	mdata->irq[2] = -1;
+	mdata->irq[31] = -1;
+	mdata->paddr += binfo->bi_immr_base;
+
 	/* setup the board related information for the enet controllers */
 	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC83xx_TSEC1);
 	if (pdata) {
 		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->interruptPHY = MPC83xx_IRQ_EXT1;
-		pdata->phyid = 0;
-		/* fixup phy address */
-		pdata->phy_reg_addr += binfo->bi_immr_base;
+		pdata->bus_id = GFAR_PHY_0;
 		memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
 	}
 
 	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC83xx_TSEC2);
 	if (pdata) {
 		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->interruptPHY = MPC83xx_IRQ_EXT2;
-		pdata->phyid = 1;
-		/* fixup phy address */
-		pdata->phy_reg_addr += binfo->bi_immr_base;
+		pdata->bus_id = GFAR_PHY_1;
 		memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
 	}
 
diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.h b/arch/ppc/platforms/83xx/mpc834x_sys.h
index 1584cd77a9ef..2e514d316fb8 100644
--- a/arch/ppc/platforms/83xx/mpc834x_sys.h
+++ b/arch/ppc/platforms/83xx/mpc834x_sys.h
@@ -3,7 +3,7 @@
  *
  * MPC834X SYS common board definitions
  *
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
  *
  * Copyright 2005 Freescale Semiconductor, Inc.
  *
@@ -19,7 +19,6 @@
 
 #include <linux/config.h>
 #include <linux/init.h>
-#include <linux/seq_file.h>
 #include <syslib/ppc83xx_setup.h>
 #include <asm/ppcboot.h>
 
diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.c b/arch/ppc/platforms/85xx/mpc8540_ads.c
index f761fdf160db..c5cde97c6ef0 100644
--- a/arch/ppc/platforms/85xx/mpc8540_ads.c
+++ b/arch/ppc/platforms/85xx/mpc8540_ads.c
@@ -3,7 +3,7 @@
  *
  * MPC8540ADS board specific routines
  *
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
  *
  * Copyright 2004 Freescale Semiconductor Inc.
  *
@@ -24,7 +24,6 @@
 #include <linux/major.h>
 #include <linux/console.h>
 #include <linux/delay.h>
-#include <linux/irq.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
 #include <linux/serial.h>
@@ -53,6 +52,10 @@
 
 #include <syslib/ppc85xx_setup.h>
 
+static const char *GFAR_PHY_0 = "phy0:0";
+static const char *GFAR_PHY_1 = "phy0:1";
+static const char *GFAR_PHY_3 = "phy0:3";
+
 /* ************************************************************************
  *
  * Setup the architecture
@@ -64,6 +67,7 @@ mpc8540ads_setup_arch(void)
 	bd_t *binfo = (bd_t *) __res;
 	unsigned int freq;
 	struct gianfar_platform_data *pdata;
+	struct gianfar_mdio_data *mdata;
 
 	/* get the core frequency */
 	freq = binfo->bi_intfreq;
@@ -90,34 +94,35 @@ mpc8540ads_setup_arch(void)
 	invalidate_tlbcam_entry(num_tlbcam_entries - 1);
 #endif
 
+	/* setup the board related info for the MDIO bus */
+	mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
+
+	mdata->irq[0] = MPC85xx_IRQ_EXT5;
+	mdata->irq[1] = MPC85xx_IRQ_EXT5;
+	mdata->irq[2] = -1;
+	mdata->irq[3] = MPC85xx_IRQ_EXT5;
+	mdata->irq[31] = -1;
+	mdata->paddr += binfo->bi_immr_base;
+
 	/* setup the board related information for the enet controllers */
 	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
 	if (pdata) {
 		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->interruptPHY = MPC85xx_IRQ_EXT5;
-		pdata->phyid = 0;
-		/* fixup phy address */
-		pdata->phy_reg_addr += binfo->bi_immr_base;
+		pdata->bus_id = GFAR_PHY_0;
 		memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
 	}
 
 	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
 	if (pdata) {
 		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->interruptPHY = MPC85xx_IRQ_EXT5;
-		pdata->phyid = 1;
-		/* fixup phy address */
-		pdata->phy_reg_addr += binfo->bi_immr_base;
+		pdata->bus_id = GFAR_PHY_1;
 		memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
 	}
 
 	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_FEC);
 	if (pdata) {
 		pdata->board_flags = 0;
-		pdata->interruptPHY = MPC85xx_IRQ_EXT5;
-		pdata->phyid = 3;
-		/* fixup phy address */
-		pdata->phy_reg_addr += binfo->bi_immr_base;
+		pdata->bus_id = GFAR_PHY_3;
 		memcpy(pdata->mac_addr, binfo->bi_enet2addr, 6);
 	}
 
diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.h b/arch/ppc/platforms/85xx/mpc8540_ads.h
index 3d05d7c4a938..e48ca3a97397 100644
--- a/arch/ppc/platforms/85xx/mpc8540_ads.h
+++ b/arch/ppc/platforms/85xx/mpc8540_ads.h
@@ -3,7 +3,7 @@
  *
  * MPC8540ADS board definitions
  *
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
  *
  * Copyright 2004 Freescale Semiconductor Inc.
  *
diff --git a/arch/ppc/platforms/85xx/mpc8555_cds.h b/arch/ppc/platforms/85xx/mpc8555_cds.h
index e0e75568bc57..1a8e6c67355d 100644
--- a/arch/ppc/platforms/85xx/mpc8555_cds.h
+++ b/arch/ppc/platforms/85xx/mpc8555_cds.h
@@ -3,7 +3,7 @@
  *
  * MPC8555CDS board definitions
  *
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
  *
  * Copyright 2004 Freescale Semiconductor Inc.
  *
diff --git a/arch/ppc/platforms/85xx/mpc8560_ads.c b/arch/ppc/platforms/85xx/mpc8560_ads.c
index f2748c88665a..8e39a5517092 100644
--- a/arch/ppc/platforms/85xx/mpc8560_ads.c
+++ b/arch/ppc/platforms/85xx/mpc8560_ads.c
@@ -3,7 +3,7 @@
  *
  * MPC8560ADS board specific routines
  *
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
  *
  * Copyright 2004 Freescale Semiconductor Inc.
  *
@@ -24,7 +24,6 @@
 #include <linux/major.h>
 #include <linux/console.h>
 #include <linux/delay.h>
-#include <linux/irq.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
 #include <linux/serial.h>
@@ -57,6 +56,10 @@
 #include <syslib/ppc85xx_setup.h>
 
 
+static const char *GFAR_PHY_0 = "phy0:0";
+static const char *GFAR_PHY_1 = "phy0:1";
+static const char *GFAR_PHY_3 = "phy0:3";
+
 /* ************************************************************************
  *
  * Setup the architecture
@@ -69,6 +72,7 @@ mpc8560ads_setup_arch(void)
 	bd_t *binfo = (bd_t *) __res;
 	unsigned int freq;
 	struct gianfar_platform_data *pdata;
+	struct gianfar_mdio_data *mdata;
 
 	cpm2_reset();
 
@@ -87,24 +91,28 @@ mpc8560ads_setup_arch(void)
 	mpc85xx_setup_hose();
 #endif
 
+	/* setup the board related info for the MDIO bus */
+	mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
+
+	mdata->irq[0] = MPC85xx_IRQ_EXT5;
+	mdata->irq[1] = MPC85xx_IRQ_EXT5;
+	mdata->irq[2] = -1;
+	mdata->irq[3] = MPC85xx_IRQ_EXT5;
+	mdata->irq[31] = -1;
+	mdata->paddr += binfo->bi_immr_base;
+
 	/* setup the board related information for the enet controllers */
 	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
 	if (pdata) {
 		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->interruptPHY = MPC85xx_IRQ_EXT5;
-		pdata->phyid = 0;
-		/* fixup phy address */
-		pdata->phy_reg_addr += binfo->bi_immr_base;
+		pdata->bus_id = GFAR_PHY_0;
 		memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
 	}
 
 	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
 	if (pdata) {
 		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->interruptPHY = MPC85xx_IRQ_EXT5;
-		pdata->phyid = 1;
-		/* fixup phy address */
-		pdata->phy_reg_addr += binfo->bi_immr_base;
+		pdata->bus_id = GFAR_PHY_1;
 		memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
 	}
 
diff --git a/arch/ppc/platforms/85xx/mpc8560_ads.h b/arch/ppc/platforms/85xx/mpc8560_ads.h
index 7df885d73e9d..143ae7eefa7c 100644
--- a/arch/ppc/platforms/85xx/mpc8560_ads.h
+++ b/arch/ppc/platforms/85xx/mpc8560_ads.h
@@ -3,7 +3,7 @@
  *
  * MPC8540ADS board definitions
  *
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
  *
  * Copyright 2004 Freescale Semiconductor Inc.
  *
diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c
index 18e952d1767c..17ce48fe3503 100644
--- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c
+++ b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c
@@ -3,7 +3,7 @@
  *
  * MPC85xx ADS board common routines
  *
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
  *
  * Copyright 2004 Freescale Semiconductor Inc.
  *
@@ -24,7 +24,6 @@
 #include <linux/major.h>
 #include <linux/console.h>
 #include <linux/delay.h>
-#include <linux/irq.h>
 #include <linux/seq_file.h>
 #include <linux/serial.h>
 #include <linux/module.h>
@@ -46,6 +45,8 @@
 
 #include <mm/mmu_decl.h>
 
+#include <syslib/ppc85xx_rio.h>
+
 #include <platforms/85xx/mpc85xx_ads_common.h>
 
 #ifndef CONFIG_PCI
@@ -190,3 +191,11 @@ mpc85xx_exclude_device(u_char bus, u_char devfn)
 }
 
 #endif /* CONFIG_PCI */
+
+#ifdef CONFIG_RAPIDIO
+void platform_rio_init(void)
+{
+	/* 512MB RIO LAW at 0xc0000000 */
+	mpc85xx_rio_setup(0xc0000000, 0x20000000);
+}
+#endif /* CONFIG_RAPIDIO */
diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h
index 3875e839cff7..198a6a02cde8 100644
--- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h
+++ b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h
@@ -3,7 +3,7 @@
  *
  * MPC85XX ADS common board definitions
  *
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
  *
  * Copyright 2004 Freescale Semiconductor Inc.
  *
@@ -19,13 +19,14 @@
 
 #include <linux/config.h>
 #include <linux/init.h>
-#include <linux/seq_file.h>
 #include <asm/ppcboot.h>
 
 #define BOARD_CCSRBAR		((uint)0xe0000000)
 #define BCSR_ADDR		((uint)0xf8000000)
 #define BCSR_SIZE		((uint)(32 * 1024))
 
+struct seq_file;
+
 extern int mpc85xx_ads_show_cpuinfo(struct seq_file *m);
 extern void mpc85xx_ads_init_IRQ(void) __init;
 extern void mpc85xx_ads_map_io(void) __init;
diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
index 6267b294f704..d8991b88dc9c 100644
--- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
+++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
@@ -3,7 +3,7 @@
  *
  * MPC85xx CDS board specific routines
  *
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
  *
  * Copyright 2004 Freescale Semiconductor, Inc
  *
@@ -24,7 +24,6 @@
 #include <linux/major.h>
 #include <linux/console.h>
 #include <linux/delay.h>
-#include <linux/irq.h>
 #include <linux/seq_file.h>
 #include <linux/serial.h>
 #include <linux/module.h>
@@ -174,10 +173,7 @@ mpc85xx_cds_init_IRQ(void)
 #ifdef CONFIG_PCI
 	openpic_hookup_cascade(PIRQ0A, "82c59 cascade", i8259_irq);
 
-	for (i = 0; i < NUM_8259_INTERRUPTS; i++)
-		irq_desc[i].handler = &i8259_pic;
-
-	i8259_init(0);
+	i8259_init(0, 0);
 #endif
 
 #ifdef CONFIG_CPM2
@@ -395,6 +391,9 @@ mpc85xx_cds_pcibios_fixup(void)
 
 TODC_ALLOC();
 
+static const char *GFAR_PHY_0 = "phy0:0";
+static const char *GFAR_PHY_1 = "phy0:1";
+
 /* ************************************************************************
  *
  * Setup the architecture
@@ -406,6 +405,7 @@ mpc85xx_cds_setup_arch(void)
 	bd_t *binfo = (bd_t *) __res;
 	unsigned int freq;
 	struct gianfar_platform_data *pdata;
+	struct gianfar_mdio_data *mdata;
 
 	/* get the core frequency */
 	freq = binfo->bi_intfreq;
@@ -449,44 +449,42 @@ mpc85xx_cds_setup_arch(void)
 	invalidate_tlbcam_entry(num_tlbcam_entries - 1);
 #endif
 
+	/* setup the board related info for the MDIO bus */
+	mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
+
+	mdata->irq[0] = MPC85xx_IRQ_EXT5;
+	mdata->irq[1] = MPC85xx_IRQ_EXT5;
+	mdata->irq[2] = -1;
+	mdata->irq[3] = -1;
+	mdata->irq[31] = -1;
+	mdata->paddr += binfo->bi_immr_base;
+
 	/* setup the board related information for the enet controllers */
 	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
 	if (pdata) {
 		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->interruptPHY = MPC85xx_IRQ_EXT5;
-		pdata->phyid = 0;
-		/* fixup phy address */
-		pdata->phy_reg_addr += binfo->bi_immr_base;
+		pdata->bus_id = GFAR_PHY_0;
 		memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
 	}
 
 	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
 	if (pdata) {
 		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->interruptPHY = MPC85xx_IRQ_EXT5;
-		pdata->phyid = 1;
-		/* fixup phy address */
-		pdata->phy_reg_addr += binfo->bi_immr_base;
+		pdata->bus_id = GFAR_PHY_1;
 		memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
 	}
 
 	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_eTSEC1);
 	if (pdata) {
 		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->interruptPHY = MPC85xx_IRQ_EXT5;
-		pdata->phyid = 0;
-		/* fixup phy address */
-		pdata->phy_reg_addr += binfo->bi_immr_base;
+		pdata->bus_id = GFAR_PHY_0;
 		memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
 	}
 
 	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_eTSEC2);
 	if (pdata) {
 		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->interruptPHY = MPC85xx_IRQ_EXT5;
-		pdata->phyid = 1;
-		/* fixup phy address */
-		pdata->phy_reg_addr += binfo->bi_immr_base;
+		pdata->bus_id = GFAR_PHY_1;
 		memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
 	}
 
diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h b/arch/ppc/platforms/85xx/mpc85xx_cds_common.h
index 12b292c6ae32..5b588cfd0e41 100644
--- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h
+++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.h
@@ -3,7 +3,7 @@
  *
  * MPC85xx CDS board definitions
  *
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
  *
  * Copyright 2004 Freescale Semiconductor, Inc
  *
diff --git a/arch/ppc/platforms/85xx/sbc8560.c b/arch/ppc/platforms/85xx/sbc8560.c
index 165df94d4aa6..45a5b81b4ed1 100644
--- a/arch/ppc/platforms/85xx/sbc8560.c
+++ b/arch/ppc/platforms/85xx/sbc8560.c
@@ -3,7 +3,7 @@
  * 
  * Wind River SBC8560 board specific routines
  * 
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala
  *
  * Copyright 2004 Freescale Semiconductor Inc.
  * 
@@ -24,7 +24,6 @@
 #include <linux/major.h>
 #include <linux/console.h>
 #include <linux/delay.h>
-#include <linux/irq.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
 #include <linux/serial.h>
@@ -92,6 +91,9 @@ sbc8560_early_serial_map(void)
 }
 #endif
 
+static const char *GFAR_PHY_25 = "phy0:25";
+static const char *GFAR_PHY_26 = "phy0:26";
+
 /* ************************************************************************
  *
  * Setup the architecture
@@ -103,6 +105,7 @@ sbc8560_setup_arch(void)
 	bd_t *binfo = (bd_t *) __res;
 	unsigned int freq;
 	struct gianfar_platform_data *pdata;
+	struct gianfar_mdio_data *mdata;
 
 	/* get the core frequency */
 	freq = binfo->bi_intfreq;
@@ -127,24 +130,26 @@ sbc8560_setup_arch(void)
 	invalidate_tlbcam_entry(num_tlbcam_entries - 1);
 #endif
 
+	/* setup the board related info for the MDIO bus */
+	mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
+
+	mdata->irq[25] = MPC85xx_IRQ_EXT6;
+	mdata->irq[26] = MPC85xx_IRQ_EXT7;
+	mdata->irq[31] = -1;
+	mdata->paddr += binfo->bi_immr_base;
+
 	/* setup the board related information for the enet controllers */
 	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
 	if (pdata) {
 		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->interruptPHY = MPC85xx_IRQ_EXT6;
-		pdata->phyid = 25;
-		/* fixup phy address */
-		pdata->phy_reg_addr += binfo->bi_immr_base;
+		pdata->bus_id = GFAR_PHY_25;
 		memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
 	}
 
 	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
 	if (pdata) {
 		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->interruptPHY = MPC85xx_IRQ_EXT7;
-		pdata->phyid = 26;
-		/* fixup phy address */
-		pdata->phy_reg_addr += binfo->bi_immr_base;
+		pdata->bus_id = GFAR_PHY_26;
 		memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
 	}
 
diff --git a/arch/ppc/platforms/85xx/sbc85xx.c b/arch/ppc/platforms/85xx/sbc85xx.c
index 4f6d1ddd6fb8..c02f110219f5 100644
--- a/arch/ppc/platforms/85xx/sbc85xx.c
+++ b/arch/ppc/platforms/85xx/sbc85xx.c
@@ -23,7 +23,6 @@
 #include <linux/major.h>
 #include <linux/console.h>
 #include <linux/delay.h>
-#include <linux/irq.h>
 #include <linux/seq_file.h>
 #include <linux/serial.h>
 #include <linux/module.h>
diff --git a/arch/ppc/platforms/85xx/stx_gp3.c b/arch/ppc/platforms/85xx/stx_gp3.c
index c99b365d6110..15ce9d070634 100644
--- a/arch/ppc/platforms/85xx/stx_gp3.c
+++ b/arch/ppc/platforms/85xx/stx_gp3.c
@@ -30,7 +30,6 @@
 #include <linux/blkdev.h>
 #include <linux/console.h>
 #include <linux/delay.h>
-#include <linux/irq.h>
 #include <linux/root_dev.h>
 #include <linux/seq_file.h>
 #include <linux/serial.h>
@@ -38,6 +37,7 @@
 #include <linux/module.h>
 #include <linux/fsl_devices.h>
 #include <linux/interrupt.h>
+#include <linux/rio.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>
@@ -58,6 +58,7 @@
 
 #include <syslib/cpm2_pic.h>
 #include <syslib/ppc85xx_common.h>
+#include <syslib/ppc85xx_rio.h>
 
 
 unsigned char __res[sizeof(bd_t)];
@@ -92,6 +93,9 @@ static u8 gp3_openpic_initsenses[] __initdata = {
 	0x0,				/* External 11: */
 };
 
+static const char *GFAR_PHY_2 = "phy0:2";
+static const char *GFAR_PHY_4 = "phy0:4";
+
 /*
  * Setup the architecture
  */
@@ -101,6 +105,7 @@ gp3_setup_arch(void)
 	bd_t *binfo = (bd_t *) __res;
 	unsigned int freq;
 	struct gianfar_platform_data *pdata;
+	struct gianfar_mdio_data *mdata;
 
 	cpm2_reset();
 
@@ -119,23 +124,26 @@ gp3_setup_arch(void)
 	mpc85xx_setup_hose();
 #endif
 
+	/* setup the board related info for the MDIO bus */
+	mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
+
+	mdata->irq[2] = MPC85xx_IRQ_EXT5;
+	mdata->irq[4] = MPC85xx_IRQ_EXT5;
+	mdata->irq[31] = -1;
+	mdata->paddr += binfo->bi_immr_base;
+
 	/* setup the board related information for the enet controllers */
 	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
 	if (pdata) {
 	/*	pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; */
-		pdata->interruptPHY = MPC85xx_IRQ_EXT5;
-		pdata->phyid = 2;
-		pdata->phy_reg_addr += binfo->bi_immr_base;
+		pdata->bus_id = GFAR_PHY_2;
 		memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
 	}
 
 	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
 	if (pdata) {
 	/*	pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; */
-		pdata->interruptPHY = MPC85xx_IRQ_EXT5;
-		pdata->phyid = 4;
-		/* fixup phy address */
-		pdata->phy_reg_addr += binfo->bi_immr_base;
+		pdata->bus_id = GFAR_PHY_4;
 		memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
 	}
 
@@ -267,6 +275,18 @@ int mpc85xx_exclude_device(u_char bus, u_char devfn)
 }
 #endif /* CONFIG_PCI */
 
+#ifdef CONFIG_RAPIDIO
+void
+platform_rio_init(void)
+{
+	/*
+	 * The STx firmware configures the RapidIO Local Access Window
+	 * at 0xc0000000 with a size of 512MB.
+	 */
+	mpc85xx_rio_setup(0xc0000000, 0x20000000);
+}
+#endif /* CONFIG_RAPIDIO */
+
 void __init
 platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 	      unsigned long r6, unsigned long r7)
diff --git a/arch/ppc/platforms/85xx/stx_gp3.h b/arch/ppc/platforms/85xx/stx_gp3.h
index 7bcc6c35a417..2f25b5195152 100644
--- a/arch/ppc/platforms/85xx/stx_gp3.h
+++ b/arch/ppc/platforms/85xx/stx_gp3.h
@@ -21,7 +21,6 @@
 
 #include <linux/config.h>
 #include <linux/init.h>
-#include <linux/seq_file.h>
 #include <asm/ppcboot.h>
 
 #define BOARD_CCSRBAR		((uint)0xe0000000)
@@ -43,7 +42,6 @@ extern void mpc85xx_setup_hose(void) __init;
 extern void mpc85xx_restart(char *cmd);
 extern void mpc85xx_power_off(void);
 extern void mpc85xx_halt(void);
-extern int mpc85xx_show_cpuinfo(struct seq_file *m);
 extern void mpc85xx_init_IRQ(void) __init;
 extern unsigned long mpc85xx_find_end_of_memory(void) __init;
 extern void mpc85xx_calibrate_decr(void) __init;
diff --git a/arch/ppc/platforms/Makefile b/arch/ppc/platforms/Makefile
index ff7452e5d8e5..7c5cdabf6f3c 100644
--- a/arch/ppc/platforms/Makefile
+++ b/arch/ppc/platforms/Makefile
@@ -14,6 +14,9 @@ obj-$(CONFIG_PPC_PMAC)		+= pmac_pic.o pmac_setup.o pmac_time.o \
 					pmac_low_i2c.o pmac_cache.o
 obj-$(CONFIG_PPC_CHRP)		+= chrp_setup.o chrp_time.o chrp_pci.o \
 					chrp_pegasos_eth.o
+ifeq ($(CONFIG_PPC_CHRP),y)
+obj-$(CONFIG_NVRAM)		+= chrp_nvram.o
+endif
 obj-$(CONFIG_PPC_PREP)		+= prep_pci.o prep_setup.o
 ifeq ($(CONFIG_PPC_PMAC),y)
 obj-$(CONFIG_NVRAM)		+= pmac_nvram.o
diff --git a/arch/ppc/platforms/chestnut.c b/arch/ppc/platforms/chestnut.c
index 7786818bd9d0..48a4a510d598 100644
--- a/arch/ppc/platforms/chestnut.c
+++ b/arch/ppc/platforms/chestnut.c
@@ -35,7 +35,6 @@
 #include <asm/time.h>
 #include <asm/dma.h>
 #include <asm/io.h>
-#include <linux/irq.h>
 #include <asm/hw_irq.h>
 #include <asm/machdep.h>
 #include <asm/kgdb.h>
@@ -542,7 +541,6 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 
 	ppc_md.setup_arch = chestnut_setup_arch;
 	ppc_md.show_cpuinfo = chestnut_show_cpuinfo;
-	ppc_md.irq_canonicalize = NULL;
 	ppc_md.init_IRQ = mv64360_init_irq;
 	ppc_md.get_irq = mv64360_get_irq;
 	ppc_md.init = NULL;
diff --git a/arch/ppc/platforms/chrp_nvram.c b/arch/ppc/platforms/chrp_nvram.c
new file mode 100644
index 000000000000..465ba9b090ef
--- /dev/null
+++ b/arch/ppc/platforms/chrp_nvram.c
@@ -0,0 +1,83 @@
+/*
+ *  c 2001 PPC 64 Team, IBM Corp
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ *
+ * /dev/nvram driver for PPC
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <asm/uaccess.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+
+static unsigned int nvram_size;
+static unsigned char nvram_buf[4];
+static DEFINE_SPINLOCK(nvram_lock);
+
+static unsigned char chrp_nvram_read(int addr)
+{
+	unsigned long done, flags;
+	unsigned char ret;
+
+	if (addr >= nvram_size) {
+		printk(KERN_DEBUG "%s: read addr %d > nvram_size %u\n",
+		       current->comm, addr, nvram_size);
+		return 0xff;
+	}
+	spin_lock_irqsave(&nvram_lock, flags);
+	if ((call_rtas("nvram-fetch", 3, 2, &done, addr, __pa(nvram_buf), 1) != 0) || 1 != done)
+		ret = 0xff;
+	else
+		ret = nvram_buf[0];
+	spin_unlock_irqrestore(&nvram_lock, flags);
+
+	return ret;
+}
+
+static void chrp_nvram_write(int addr, unsigned char val)
+{
+	unsigned long done, flags;
+
+	if (addr >= nvram_size) {
+		printk(KERN_DEBUG "%s: write addr %d > nvram_size %u\n",
+		       current->comm, addr, nvram_size);
+		return;
+	}
+	spin_lock_irqsave(&nvram_lock, flags);
+	nvram_buf[0] = val;
+	if ((call_rtas("nvram-store", 3, 2, &done, addr, __pa(nvram_buf), 1) != 0) || 1 != done)
+		printk(KERN_DEBUG "rtas IO error storing 0x%02x at %d", val, addr);
+	spin_unlock_irqrestore(&nvram_lock, flags);
+}
+
+void __init chrp_nvram_init(void)
+{
+	struct device_node *nvram;
+	unsigned int *nbytes_p, proplen;
+
+	nvram = of_find_node_by_type(NULL, "nvram");
+	if (nvram == NULL)
+		return;
+
+	nbytes_p = (unsigned int *)get_property(nvram, "#bytes", &proplen);
+	if (nbytes_p == NULL || proplen != sizeof(unsigned int))
+		return;
+
+	nvram_size = *nbytes_p;
+
+	printk(KERN_INFO "CHRP nvram contains %u bytes\n", nvram_size);
+	of_node_put(nvram);
+
+	ppc_md.nvram_read_val = chrp_nvram_read;
+	ppc_md.nvram_write_val = chrp_nvram_write;
+
+	return;
+}
diff --git a/arch/ppc/platforms/chrp_pci.c b/arch/ppc/platforms/chrp_pci.c
index 7d3fbb5c5db2..bd047aac01b1 100644
--- a/arch/ppc/platforms/chrp_pci.c
+++ b/arch/ppc/platforms/chrp_pci.c
@@ -29,7 +29,7 @@ void __iomem *gg2_pci_config_base;
  * limit the bus number to 3 bits
  */
 
-int __chrp gg2_read_config(struct pci_bus *bus, unsigned int devfn, int off,
+int gg2_read_config(struct pci_bus *bus, unsigned int devfn, int off,
 			   int len, u32 *val)
 {
 	volatile void __iomem *cfg_data;
@@ -56,7 +56,7 @@ int __chrp gg2_read_config(struct pci_bus *bus, unsigned int devfn, int off,
 	return PCIBIOS_SUCCESSFUL;
 }
 
-int __chrp gg2_write_config(struct pci_bus *bus, unsigned int devfn, int off,
+int gg2_write_config(struct pci_bus *bus, unsigned int devfn, int off,
 			    int len, u32 val)
 {
 	volatile void __iomem *cfg_data;
@@ -92,7 +92,7 @@ static struct pci_ops gg2_pci_ops =
 /*
  * Access functions for PCI config space using RTAS calls.
  */
-int __chrp
+int
 rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
 		 int len, u32 *val)
 {
@@ -108,7 +108,7 @@ rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
 	return rval? PCIBIOS_DEVICE_NOT_FOUND: PCIBIOS_SUCCESSFUL;
 }
 
-int __chrp
+int
 rtas_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
 		  int len, u32 val)
 {
@@ -203,7 +203,7 @@ static void __init setup_peg2(struct pci_controller *hose, struct device_node *d
 		printk ("RTAS supporting Pegasos OF not found, please upgrade"
 			" your firmware\n");
 	}
-	pci_assign_all_busses = 1;
+	pci_assign_all_buses = 1;
 }
 
 void __init
diff --git a/arch/ppc/platforms/chrp_pegasos_eth.c b/arch/ppc/platforms/chrp_pegasos_eth.c
index cad5bfa153b2..108a6e265185 100644
--- a/arch/ppc/platforms/chrp_pegasos_eth.c
+++ b/arch/ppc/platforms/chrp_pegasos_eth.c
@@ -13,11 +13,24 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/mv643xx.h>
 #include <linux/pci.h>
 
-/* Pegasos 2 specific Marvell MV 64361 gigabit ethernet port setup */
+#define PEGASOS2_MARVELL_REGBASE 		(0xf1000000)
+#define PEGASOS2_MARVELL_REGSIZE 		(0x00004000)
+#define PEGASOS2_SRAM_BASE 			(0xf2000000)
+#define PEGASOS2_SRAM_SIZE			(256*1024)
+
+#define PEGASOS2_SRAM_BASE_ETH0			(PEGASOS2_SRAM_BASE)
+#define PEGASOS2_SRAM_BASE_ETH1			(PEGASOS2_SRAM_BASE_ETH0 + (PEGASOS2_SRAM_SIZE / 2) )
+
+
+#define PEGASOS2_SRAM_RXRING_SIZE		(PEGASOS2_SRAM_SIZE/4)
+#define PEGASOS2_SRAM_TXRING_SIZE		(PEGASOS2_SRAM_SIZE/4)
+
+#undef BE_VERBOSE
+
 static struct resource mv643xx_eth_shared_resources[] = {
 	[0] = {
 		.name	= "ethernet shared base",
@@ -44,7 +57,16 @@ static struct resource mv643xx_eth0_resources[] = {
 	},
 };
 
-static struct mv643xx_eth_platform_data eth0_pd;
+
+static struct mv643xx_eth_platform_data eth0_pd = {
+	.tx_sram_addr = PEGASOS2_SRAM_BASE_ETH0,
+	.tx_sram_size = PEGASOS2_SRAM_TXRING_SIZE,
+	.tx_queue_size = PEGASOS2_SRAM_TXRING_SIZE/16,
+
+	.rx_sram_addr = PEGASOS2_SRAM_BASE_ETH0 + PEGASOS2_SRAM_TXRING_SIZE,
+	.rx_sram_size = PEGASOS2_SRAM_RXRING_SIZE,
+	.rx_queue_size = PEGASOS2_SRAM_RXRING_SIZE/16,
+};
 
 static struct platform_device eth0_device = {
 	.name		= MV643XX_ETH_NAME,
@@ -65,7 +87,15 @@ static struct resource mv643xx_eth1_resources[] = {
 	},
 };
 
-static struct mv643xx_eth_platform_data eth1_pd;
+static struct mv643xx_eth_platform_data eth1_pd = {
+	.tx_sram_addr = PEGASOS2_SRAM_BASE_ETH1,
+	.tx_sram_size = PEGASOS2_SRAM_TXRING_SIZE,
+	.tx_queue_size = PEGASOS2_SRAM_TXRING_SIZE/16,
+
+	.rx_sram_addr = PEGASOS2_SRAM_BASE_ETH1 + PEGASOS2_SRAM_TXRING_SIZE,
+	.rx_sram_size = PEGASOS2_SRAM_RXRING_SIZE,
+	.rx_queue_size = PEGASOS2_SRAM_RXRING_SIZE/16,
+};
 
 static struct platform_device eth1_device = {
 	.name		= MV643XX_ETH_NAME,
@@ -83,9 +113,62 @@ static struct platform_device *mv643xx_eth_pd_devs[] __initdata = {
 	&eth1_device,
 };
 
+/***********/
+/***********/
+#define MV_READ(offset,val) 	{ val = readl(mv643xx_reg_base + offset); }
+#define MV_WRITE(offset,data) writel(data, mv643xx_reg_base + offset)
+
+static void __iomem *mv643xx_reg_base;
+
+static int Enable_SRAM(void)
+{
+	u32 ALong;
+
+	if (mv643xx_reg_base == NULL)
+		mv643xx_reg_base = ioremap(PEGASOS2_MARVELL_REGBASE,
+					PEGASOS2_MARVELL_REGSIZE);
+
+	if (mv643xx_reg_base == NULL)
+		return -ENOMEM;
+
+#ifdef BE_VERBOSE
+	printk("Pegasos II/Marvell MV64361: register remapped from %p to %p\n",
+		(void *)PEGASOS2_MARVELL_REGBASE, (void *)mv643xx_reg_base);
+#endif
+
+	MV_WRITE(MV64340_SRAM_CONFIG, 0);
 
-int
-mv643xx_eth_add_pds(void)
+	MV_WRITE(MV64340_INTEGRATED_SRAM_BASE_ADDR, PEGASOS2_SRAM_BASE >> 16);
+
+	MV_READ(MV64340_BASE_ADDR_ENABLE, ALong);
+	ALong &= ~(1 << 19);
+	MV_WRITE(MV64340_BASE_ADDR_ENABLE, ALong);
+
+	ALong = 0x02;
+	ALong |= PEGASOS2_SRAM_BASE & 0xffff0000;
+	MV_WRITE(MV643XX_ETH_BAR_4, ALong);
+
+	MV_WRITE(MV643XX_ETH_SIZE_REG_4, (PEGASOS2_SRAM_SIZE-1) & 0xffff0000);
+
+	MV_READ(MV643XX_ETH_BASE_ADDR_ENABLE_REG, ALong);
+	ALong &= ~(1 << 4);
+	MV_WRITE(MV643XX_ETH_BASE_ADDR_ENABLE_REG, ALong);
+
+#ifdef BE_VERBOSE
+	printk("Pegasos II/Marvell MV64361: register unmapped\n");
+	printk("Pegasos II/Marvell MV64361: SRAM at %p, size=%x\n", (void*) PEGASOS2_SRAM_BASE, PEGASOS2_SRAM_SIZE);
+#endif
+
+	iounmap(mv643xx_reg_base);
+	mv643xx_reg_base = NULL;
+
+	return 1;
+}
+
+
+/***********/
+/***********/
+int mv643xx_eth_add_pds(void)
 {
 	int ret = 0;
 	static struct pci_device_id pci_marvell_mv64360[] = {
@@ -93,9 +176,38 @@ mv643xx_eth_add_pds(void)
 		{ }
 	};
 
+#ifdef BE_VERBOSE
+	printk("Pegasos II/Marvell MV64361: init\n");
+#endif
+
 	if (pci_dev_present(pci_marvell_mv64360)) {
-		ret = platform_add_devices(mv643xx_eth_pd_devs, ARRAY_SIZE(mv643xx_eth_pd_devs));
+		ret = platform_add_devices(mv643xx_eth_pd_devs,
+				ARRAY_SIZE(mv643xx_eth_pd_devs));
+
+		if ( Enable_SRAM() < 0)
+		{
+			eth0_pd.tx_sram_addr = 0;
+			eth0_pd.tx_sram_size = 0;
+			eth0_pd.rx_sram_addr = 0;
+			eth0_pd.rx_sram_size = 0;
+
+			eth1_pd.tx_sram_addr = 0;
+			eth1_pd.tx_sram_size = 0;
+			eth1_pd.rx_sram_addr = 0;
+			eth1_pd.rx_sram_size = 0;
+
+#ifdef BE_VERBOSE
+			printk("Pegasos II/Marvell MV64361: Can't enable the "
+				"SRAM\n");
+#endif
+		}
 	}
+
+#ifdef BE_VERBOSE
+	printk("Pegasos II/Marvell MV64361: init is over\n");
+#endif
+
 	return ret;
 }
+
 device_initcall(mv643xx_eth_add_pds);
diff --git a/arch/ppc/platforms/chrp_setup.c b/arch/ppc/platforms/chrp_setup.c
index 57f29ab29bda..f1b70ab3c6fd 100644
--- a/arch/ppc/platforms/chrp_setup.c
+++ b/arch/ppc/platforms/chrp_setup.c
@@ -32,7 +32,6 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/ide.h>
-#include <linux/irq.h>
 #include <linux/console.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
@@ -105,7 +104,7 @@ static const char *gg2_cachemodes[4] = {
 	"Disabled", "Write-Through", "Copy-Back", "Transparent Mode"
 };
 
-int __chrp
+int
 chrp_show_cpuinfo(struct seq_file *m)
 {
 	int i, sdramen;
@@ -303,7 +302,7 @@ void __init chrp_setup_arch(void)
 	pci_create_OF_bus_map();
 }
 
-void __chrp
+void
 chrp_event_scan(void)
 {
 	unsigned char log[1024];
@@ -314,7 +313,7 @@ chrp_event_scan(void)
 	ppc_md.heartbeat_count = ppc_md.heartbeat_reset;
 }
 
-void __chrp
+void
 chrp_restart(char *cmd)
 {
 	printk("RTAS system-reboot returned %d\n",
@@ -322,7 +321,7 @@ chrp_restart(char *cmd)
 	for (;;);
 }
 
-void __chrp
+void
 chrp_power_off(void)
 {
 	/* allow power on only with power button press */
@@ -331,20 +330,12 @@ chrp_power_off(void)
 	for (;;);
 }
 
-void __chrp
+void
 chrp_halt(void)
 {
 	chrp_power_off();
 }
 
-u_int __chrp
-chrp_irq_canonicalize(u_int irq)
-{
-	if (irq == 2)
-		return 9;
-	return irq;
-}
-
 /*
  * Finds the open-pic node and sets OpenPIC_Addr based on its reg property.
  * Then checks if it has an interrupt-ranges property.  If it does then
@@ -445,9 +436,7 @@ void __init chrp_init_IRQ(void)
 				       i8259_irq);
 
 	}
-	for (i = 0; i < NUM_8259_INTERRUPTS; i++)
-		irq_desc[i].handler = &i8259_pic;
-	i8259_init(chrp_int_ack);
+	i8259_init(chrp_int_ack, 0);
 
 #if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
 	/* see if there is a keyboard in the device tree
@@ -465,8 +454,7 @@ void __init
 chrp_init2(void)
 {
 #ifdef CONFIG_NVRAM
-// XX replace this in a more saner way
-//	pmac_nvram_init();
+	chrp_nvram_init();
 #endif
 
 	request_region(0x20,0x20,"pic1");
@@ -500,6 +488,7 @@ chrp_init(unsigned long r3, unsigned long r4, unsigned long r5,
 	DMA_MODE_READ = 0x44;
 	DMA_MODE_WRITE = 0x48;
 	isa_io_base = CHRP_ISA_IO_BASE;		/* default value */
+	ppc_do_canonicalize_irqs = 1;
 
 	if (root)
 		machine = get_property(root, "model", NULL);
@@ -518,7 +507,6 @@ chrp_init(unsigned long r3, unsigned long r4, unsigned long r5,
 	ppc_md.show_percpuinfo = of_show_percpuinfo;
 	ppc_md.show_cpuinfo   = chrp_show_cpuinfo;
 
-	ppc_md.irq_canonicalize = chrp_irq_canonicalize;
 	ppc_md.init_IRQ       = chrp_init_IRQ;
 	if (_chrp_type == _CHRP_Pegasos)
 		ppc_md.get_irq        = i8259_irq;
@@ -562,7 +550,7 @@ chrp_init(unsigned long r3, unsigned long r4, unsigned long r5,
 #endif
 
 #ifdef CONFIG_SMP
-	ppc_md.smp_ops = &chrp_smp_ops;
+	smp_ops = &chrp_smp_ops;
 #endif /* CONFIG_SMP */
 
 	/*
@@ -572,7 +560,7 @@ chrp_init(unsigned long r3, unsigned long r4, unsigned long r5,
 	if (ppc_md.progress) ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0x0);
 }
 
-void __chrp
+void
 rtas_display_progress(char *s, unsigned short hex)
 {
 	int width;
@@ -599,7 +587,7 @@ rtas_display_progress(char *s, unsigned short hex)
 	call_rtas( "display-character", 1, 1, NULL, ' ' );
 }
 
-void __chrp
+void
 rtas_indicator_progress(char *s, unsigned short hex)
 {
 	call_rtas("set-indicator", 3, 1, NULL, 6, 0, hex);
diff --git a/arch/ppc/platforms/chrp_smp.c b/arch/ppc/platforms/chrp_smp.c
index 0ea1f7d9e46a..97e539557ecb 100644
--- a/arch/ppc/platforms/chrp_smp.c
+++ b/arch/ppc/platforms/chrp_smp.c
@@ -31,6 +31,7 @@
 #include <asm/residual.h>
 #include <asm/time.h>
 #include <asm/open_pic.h>
+#include <asm/machdep.h>
 
 extern unsigned long smp_chrp_cpu_nr;
 
@@ -88,7 +89,7 @@ smp_chrp_take_timebase(void)
 }
 
 /* CHRP with openpic */
-struct smp_ops_t chrp_smp_ops __chrpdata = {
+struct smp_ops_t chrp_smp_ops = {
 	.message_pass = smp_openpic_message_pass,
 	.probe = smp_chrp_probe,
 	.kick_cpu = smp_chrp_kick_cpu,
diff --git a/arch/ppc/platforms/chrp_time.c b/arch/ppc/platforms/chrp_time.c
index 6037ce7796f5..29d074c305f0 100644
--- a/arch/ppc/platforms/chrp_time.c
+++ b/arch/ppc/platforms/chrp_time.c
@@ -52,7 +52,7 @@ long __init chrp_time_init(void)
 	return 0;
 }
 
-int __chrp chrp_cmos_clock_read(int addr)
+int chrp_cmos_clock_read(int addr)
 {
 	if (nvram_as1 != 0)
 		outb(addr>>8, nvram_as1);
@@ -60,7 +60,7 @@ int __chrp chrp_cmos_clock_read(int addr)
 	return (inb(nvram_data));
 }
 
-void __chrp chrp_cmos_clock_write(unsigned long val, int addr)
+void chrp_cmos_clock_write(unsigned long val, int addr)
 {
 	if (nvram_as1 != 0)
 		outb(addr>>8, nvram_as1);
@@ -72,7 +72,7 @@ void __chrp chrp_cmos_clock_write(unsigned long val, int addr)
 /*
  * Set the hardware clock. -- Cort
  */
-int __chrp chrp_set_rtc_time(unsigned long nowtime)
+int chrp_set_rtc_time(unsigned long nowtime)
 {
 	unsigned char save_control, save_freq_select;
 	struct rtc_time tm;
@@ -118,7 +118,7 @@ int __chrp chrp_set_rtc_time(unsigned long nowtime)
 	return 0;
 }
 
-unsigned long __chrp chrp_get_rtc_time(void)
+unsigned long chrp_get_rtc_time(void)
 {
 	unsigned int year, mon, day, hour, min, sec;
 	int uip, i;
diff --git a/arch/ppc/platforms/cpci690.c b/arch/ppc/platforms/cpci690.c
index f64ac2acb603..6ca7bcac9474 100644
--- a/arch/ppc/platforms/cpci690.c
+++ b/arch/ppc/platforms/cpci690.c
@@ -21,6 +21,7 @@
 #include <linux/initrd.h>
 #include <linux/root_dev.h>
 #include <linux/mv643xx.h>
+#include <linux/platform_device.h>
 #include <asm/bootinfo.h>
 #include <asm/machdep.h>
 #include <asm/todc.h>
diff --git a/arch/ppc/platforms/ev64260.c b/arch/ppc/platforms/ev64260.c
index aa50637a5cfb..32358b3fb236 100644
--- a/arch/ppc/platforms/ev64260.c
+++ b/arch/ppc/platforms/ev64260.c
@@ -33,6 +33,7 @@
 #include <linux/console.h>
 #include <linux/initrd.h>
 #include <linux/root_dev.h>
+#include <linux/platform_device.h>
 #if !defined(CONFIG_SERIAL_MPSC_CONSOLE)
 #include <linux/serial.h>
 #include <linux/tty.h>
diff --git a/arch/ppc/platforms/ev64360.c b/arch/ppc/platforms/ev64360.c
index 9811a8a52c25..b9d844f88c2b 100644
--- a/arch/ppc/platforms/ev64360.c
+++ b/arch/ppc/platforms/ev64360.c
@@ -25,6 +25,7 @@
 #include <linux/bootmem.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx.h>
+#include <linux/platform_device.h>
 #ifdef CONFIG_BOOTIMG
 #include <linux/bootimg.h>
 #endif
@@ -35,6 +36,7 @@
 #include <asm/bootinfo.h>
 #include <asm/ppcboot.h>
 #include <asm/mv64x60.h>
+#include <asm/machdep.h>
 #include <platforms/ev64360.h>
 
 #define BOARD_VENDOR    "Marvell"
@@ -50,6 +52,8 @@ static u32		ev64360_bus_frequency;
 
 unsigned char	__res[sizeof(bd_t)];
 
+TODC_ALLOC();
+
 static int __init
 ev64360_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
 {
@@ -180,6 +184,9 @@ ev64360_setup_peripherals(void)
 		 EV64360_RTC_WINDOW_BASE, EV64360_RTC_WINDOW_SIZE, 0);
 	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
 
+	TODC_INIT(TODC_TYPE_DS1501, 0, 0,
+		ioremap(EV64360_RTC_WINDOW_BASE, EV64360_RTC_WINDOW_SIZE), 8);
+
 	mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN,
 		 EV64360_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0);
 	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN);
@@ -494,6 +501,13 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 	ppc_md.power_off = ev64360_power_off;
 	ppc_md.halt = ev64360_halt;
 	ppc_md.find_end_of_memory = ev64360_find_end_of_memory;
+	ppc_md.init = NULL;
+
+	ppc_md.time_init = todc_time_init;
+	ppc_md.set_rtc_time = todc_set_rtc_time;
+	ppc_md.get_rtc_time = todc_get_rtc_time;
+	ppc_md.nvram_read_val = todc_direct_read_val;
+	ppc_md.nvram_write_val = todc_direct_write_val;
 	ppc_md.calibrate_decr = ev64360_calibrate_decr;
 
 #if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE)
diff --git a/arch/ppc/platforms/fads.h b/arch/ppc/platforms/fads.h
index b60c56450b67..a48fb8d723e4 100644
--- a/arch/ppc/platforms/fads.h
+++ b/arch/ppc/platforms/fads.h
@@ -25,6 +25,8 @@
 
 #if defined(CONFIG_MPC86XADS)
 
+#define BOARD_CHIP_NAME "MPC86X"
+
 /* U-Boot maps BCSR to 0xff080000 */
 #define BCSR_ADDR		((uint)0xff080000)
 
diff --git a/arch/ppc/platforms/gemini_setup.c b/arch/ppc/platforms/gemini_setup.c
index e391e52383c7..729897c59033 100644
--- a/arch/ppc/platforms/gemini_setup.c
+++ b/arch/ppc/platforms/gemini_setup.c
@@ -21,7 +21,6 @@
 #include <linux/major.h>
 #include <linux/initrd.h>
 #include <linux/console.h>
-#include <linux/irq.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
 #include <linux/bcd.h>
@@ -36,6 +35,7 @@
 #include <asm/time.h>
 #include <asm/open_pic.h>
 #include <asm/bootinfo.h>
+#include <asm/machdep.h>
 
 void gemini_find_bridges(void);
 static int gemini_get_clock_speed(void);
@@ -556,7 +556,6 @@ void __init platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 
 	ppc_md.setup_arch = gemini_setup_arch;
 	ppc_md.show_cpuinfo = gemini_show_cpuinfo;
-	ppc_md.irq_canonicalize = NULL;
 	ppc_md.init_IRQ = gemini_init_IRQ;
 	ppc_md.get_irq = openpic_get_irq;
 	ppc_md.init = NULL;
@@ -576,6 +575,6 @@ void __init platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 	ppc_md.pcibios_fixup_bus = gemini_pcibios_fixup;
 
 #ifdef CONFIG_SMP
-	ppc_md.smp_ops = &gemini_smp_ops;
+	smp_ops = &gemini_smp_ops;
 #endif /* CONFIG_SMP */
 }
diff --git a/arch/ppc/platforms/hdpu.c b/arch/ppc/platforms/hdpu.c
index ff3796860123..50039a204c24 100644
--- a/arch/ppc/platforms/hdpu.c
+++ b/arch/ppc/platforms/hdpu.c
@@ -22,6 +22,7 @@
 #include <linux/irq.h>
 #include <linux/ide.h>
 #include <linux/seq_file.h>
+#include <linux/platform_device.h>
 
 #include <linux/initrd.h>
 #include <linux/root_dev.h>
@@ -609,11 +610,6 @@ static void parse_bootinfo(unsigned long r3,
 }
 
 #if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-static int hdpu_ide_check_region(ide_ioreg_t from, unsigned int extent)
-{
-	return check_region(from, extent);
-}
-
 static void
 hdpu_ide_request_region(ide_ioreg_t from, unsigned int extent, const char *name)
 {
@@ -753,7 +749,7 @@ static int smp_hdpu_probe(void)
 }
 
 static void
-smp_hdpu_message_pass(int target, int msg, unsigned long data, int wait)
+smp_hdpu_message_pass(int target, int msg)
 {
 	if (msg > 0x3) {
 		printk("SMP %d: smp_message_pass: unknown msg %d\n",
@@ -949,7 +945,7 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 #endif				/* CONFIG_SERIAL_TEXT_DEBUG */
 
 #ifdef CONFIG_SMP
-	ppc_md.smp_ops = &hdpu_smp_ops;
+	smp_ops = &hdpu_smp_ops;
 #endif				/* CONFIG_SMP */
 
 #if defined(CONFIG_SERIAL_MPSC) || defined(CONFIG_MV643XX_ETH)
diff --git a/arch/ppc/platforms/katana.c b/arch/ppc/platforms/katana.c
index 2b53afae0e9c..6e58e30ceed1 100644
--- a/arch/ppc/platforms/katana.c
+++ b/arch/ppc/platforms/katana.c
@@ -29,6 +29,7 @@
 #include <linux/seq_file.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx.h>
+#include <linux/platform_device.h>
 #ifdef CONFIG_BOOTIMG
 #include <linux/bootimg.h>
 #endif
@@ -42,6 +43,7 @@
 #include <asm/ppcboot.h>
 #include <asm/mv64x60.h>
 #include <platforms/katana.h>
+#include <asm/machdep.h>
 
 static struct mv64x60_handle	bh;
 static katana_id_t		katana_id;
@@ -520,7 +522,7 @@ katana_fixup_resources(struct pci_dev *dev)
 {
 	u16	v16;
 
-	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, L1_CACHE_LINE_SIZE>>2);
+	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, L1_CACHE_BYTES>>2);
 
 	pci_read_config_word(dev, PCI_COMMAND, &v16);
 	v16 |= PCI_COMMAND_INVALIDATE | PCI_COMMAND_FAST_BACK;
diff --git a/arch/ppc/platforms/lite5200.c b/arch/ppc/platforms/lite5200.c
index b604cf8b3cae..d44cc991179f 100644
--- a/arch/ppc/platforms/lite5200.c
+++ b/arch/ppc/platforms/lite5200.c
@@ -35,6 +35,7 @@
 #include <asm/io.h>
 #include <asm/mpc52xx.h>
 #include <asm/ppc_sys.h>
+#include <asm/machdep.h>
 
 #include <syslib/mpc52xx_pci.h>
 
diff --git a/arch/ppc/platforms/lopec.c b/arch/ppc/platforms/lopec.c
index a5569525e0af..06d247c23b82 100644
--- a/arch/ppc/platforms/lopec.c
+++ b/arch/ppc/platforms/lopec.c
@@ -144,15 +144,6 @@ lopec_show_cpuinfo(struct seq_file *m)
 	return 0;
 }
 
-static u32
-lopec_irq_canonicalize(u32 irq)
-{
-	if (irq == 2)
-		return 9;
-	else
-		return irq;
-}
-
 static void
 lopec_restart(char *cmd)
 {
@@ -276,15 +267,11 @@ lopec_init_IRQ(void)
 	openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
 			&i8259_irq);
 
-	/* Map i8259 interrupts */
-	for(i = 0; i < NUM_8259_INTERRUPTS; i++)
-		irq_desc[i].handler = &i8259_pic;
-
 	/*
 	 * The EPIC allows for a read in the range of 0xFEF00000 ->
 	 * 0xFEFFFFFF to generate a PCI interrupt-acknowledge transaction.
 	 */
-	i8259_init(0xfef00000);
+	i8259_init(0xfef00000, 0);
 }
 
 static int __init
@@ -379,10 +366,10 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 	ISA_DMA_THRESHOLD = 0x00ffffff;
 	DMA_MODE_READ = 0x44;
 	DMA_MODE_WRITE = 0x48;
+	ppc_do_canonicalize_irqs = 1;
 
 	ppc_md.setup_arch = lopec_setup_arch;
 	ppc_md.show_cpuinfo = lopec_show_cpuinfo;
-	ppc_md.irq_canonicalize = lopec_irq_canonicalize;
 	ppc_md.init_IRQ = lopec_init_IRQ;
 	ppc_md.get_irq = openpic_get_irq;
 
diff --git a/arch/ppc/platforms/mpc885ads.h b/arch/ppc/platforms/mpc885ads.h
index eb386635b0fd..a80b7d116b49 100644
--- a/arch/ppc/platforms/mpc885ads.h
+++ b/arch/ppc/platforms/mpc885ads.h
@@ -88,5 +88,7 @@
 #define SICR_ENET_MASK	((uint)0x00ff0000)
 #define SICR_ENET_CLKRT	((uint)0x002c0000)
 
+#define BOARD_CHIP_NAME "MPC885"
+
 #endif /* __ASM_MPC885ADS_H__ */
 #endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/mvme5100.c b/arch/ppc/platforms/mvme5100.c
index b292b44b760c..108eb182dddc 100644
--- a/arch/ppc/platforms/mvme5100.c
+++ b/arch/ppc/platforms/mvme5100.c
@@ -20,7 +20,6 @@
 #include <linux/initrd.h>
 #include <linux/console.h>
 #include <linux/delay.h>
-#include <linux/irq.h>
 #include <linux/ide.h>
 #include <linux/seq_file.h>
 #include <linux/kdev_t.h>
@@ -224,11 +223,7 @@ mvme5100_init_IRQ(void)
 	openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
 			&i8259_irq);
 
-	/* Map i8259 interrupts. */
-	for (i = 0; i < NUM_8259_INTERRUPTS; i++)
-		irq_desc[i].handler = &i8259_pic;
-
-	i8259_init(0);
+	i8259_init(0, 0);
 #else
 	openpic_init(0);
 #endif
diff --git a/arch/ppc/platforms/pal4_setup.c b/arch/ppc/platforms/pal4_setup.c
index 12446b93e38c..f93a3f871932 100644
--- a/arch/ppc/platforms/pal4_setup.c
+++ b/arch/ppc/platforms/pal4_setup.c
@@ -28,6 +28,7 @@
 #include <asm/io.h>
 #include <asm/todc.h>
 #include <asm/bootinfo.h>
+#include <asm/machdep.h>
 
 #include <syslib/cpc700.h>
 
diff --git a/arch/ppc/platforms/pmac_backlight.c b/arch/ppc/platforms/pmac_backlight.c
index ed2b1cebc19a..8be2f7d071f0 100644
--- a/arch/ppc/platforms/pmac_backlight.c
+++ b/arch/ppc/platforms/pmac_backlight.c
@@ -37,7 +37,7 @@ static int backlight_req_enable = -1;
 static void backlight_callback(void *);
 static DECLARE_WORK(backlight_work, backlight_callback, NULL);
 
-void __pmac register_backlight_controller(struct backlight_controller *ctrler,
+void register_backlight_controller(struct backlight_controller *ctrler,
 					  void *data, char *type)
 {
 	struct device_node* bk_node;
@@ -99,7 +99,7 @@ void __pmac register_backlight_controller(struct backlight_controller *ctrler,
 }
 EXPORT_SYMBOL(register_backlight_controller);
 
-void __pmac unregister_backlight_controller(struct backlight_controller
+void unregister_backlight_controller(struct backlight_controller
 					    *ctrler, void *data)
 {
 	/* We keep the current backlight level (for now) */
@@ -108,7 +108,7 @@ void __pmac unregister_backlight_controller(struct backlight_controller
 }
 EXPORT_SYMBOL(unregister_backlight_controller);
 
-static int __pmac __set_backlight_enable(int enable)
+static int __set_backlight_enable(int enable)
 {
 	int rc;
 
@@ -122,7 +122,7 @@ static int __pmac __set_backlight_enable(int enable)
 	release_console_sem();
 	return rc;
 }
-int __pmac set_backlight_enable(int enable)
+int set_backlight_enable(int enable)
 {
 	if (!backlighter)
 		return -ENODEV;
@@ -133,7 +133,7 @@ int __pmac set_backlight_enable(int enable)
 
 EXPORT_SYMBOL(set_backlight_enable);
 
-int __pmac get_backlight_enable(void)
+int get_backlight_enable(void)
 {
 	if (!backlighter)
 		return -ENODEV;
@@ -141,7 +141,7 @@ int __pmac get_backlight_enable(void)
 }
 EXPORT_SYMBOL(get_backlight_enable);
 
-static int __pmac __set_backlight_level(int level)
+static int __set_backlight_level(int level)
 {
 	int rc = 0;
 
@@ -165,7 +165,7 @@ static int __pmac __set_backlight_level(int level)
 	}
 	return rc;
 }
-int __pmac set_backlight_level(int level)
+int set_backlight_level(int level)
 {
 	if (!backlighter)
 		return -ENODEV;
@@ -176,7 +176,7 @@ int __pmac set_backlight_level(int level)
 
 EXPORT_SYMBOL(set_backlight_level);
 
-int __pmac get_backlight_level(void)
+int get_backlight_level(void)
 {
 	if (!backlighter)
 		return -ENODEV;
diff --git a/arch/ppc/platforms/pmac_cpufreq.c b/arch/ppc/platforms/pmac_cpufreq.c
index c0605244edda..fba7e4d7c0bf 100644
--- a/arch/ppc/platforms/pmac_cpufreq.c
+++ b/arch/ppc/platforms/pmac_cpufreq.c
@@ -136,7 +136,7 @@ static inline void debug_calc_bogomips(void)
 
 /* Switch CPU speed under 750FX CPU control
  */
-static int __pmac cpu_750fx_cpu_speed(int low_speed)
+static int cpu_750fx_cpu_speed(int low_speed)
 {
 	u32 hid2;
 
@@ -172,7 +172,7 @@ static int __pmac cpu_750fx_cpu_speed(int low_speed)
 	return 0;
 }
 
-static unsigned int __pmac cpu_750fx_get_cpu_speed(void)
+static unsigned int cpu_750fx_get_cpu_speed(void)
 {
 	if (mfspr(SPRN_HID1) & HID1_PS)
 		return low_freq;
@@ -181,7 +181,7 @@ static unsigned int __pmac cpu_750fx_get_cpu_speed(void)
 }
 
 /* Switch CPU speed using DFS */
-static int __pmac dfs_set_cpu_speed(int low_speed)
+static int dfs_set_cpu_speed(int low_speed)
 {
 	if (low_speed == 0) {
 		/* ramping up, set voltage first */
@@ -205,7 +205,7 @@ static int __pmac dfs_set_cpu_speed(int low_speed)
 	return 0;
 }
 
-static unsigned int __pmac dfs_get_cpu_speed(void)
+static unsigned int dfs_get_cpu_speed(void)
 {
 	if (mfspr(SPRN_HID1) & HID1_DFS)
 		return low_freq;
@@ -216,7 +216,7 @@ static unsigned int __pmac dfs_get_cpu_speed(void)
 
 /* Switch CPU speed using slewing GPIOs
  */
-static int __pmac gpios_set_cpu_speed(int low_speed)
+static int gpios_set_cpu_speed(int low_speed)
 {
 	int gpio, timeout = 0;
 
@@ -258,7 +258,7 @@ static int __pmac gpios_set_cpu_speed(int low_speed)
 
 /* Switch CPU speed under PMU control
  */
-static int __pmac pmu_set_cpu_speed(int low_speed)
+static int pmu_set_cpu_speed(int low_speed)
 {
 	struct adb_request req;
 	unsigned long save_l2cr;
@@ -354,7 +354,7 @@ static int __pmac pmu_set_cpu_speed(int low_speed)
 	return 0;
 }
 
-static int __pmac do_set_cpu_speed(int speed_mode, int notify)
+static int do_set_cpu_speed(int speed_mode, int notify)
 {
 	struct cpufreq_freqs freqs;
 	unsigned long l3cr;
@@ -391,17 +391,17 @@ static int __pmac do_set_cpu_speed(int speed_mode, int notify)
 	return 0;
 }
 
-static unsigned int __pmac pmac_cpufreq_get_speed(unsigned int cpu)
+static unsigned int pmac_cpufreq_get_speed(unsigned int cpu)
 {
 	return cur_freq;
 }
 
-static int __pmac pmac_cpufreq_verify(struct cpufreq_policy *policy)
+static int pmac_cpufreq_verify(struct cpufreq_policy *policy)
 {
 	return cpufreq_frequency_table_verify(policy, pmac_cpu_freqs);
 }
 
-static int __pmac pmac_cpufreq_target(	struct cpufreq_policy *policy,
+static int pmac_cpufreq_target(	struct cpufreq_policy *policy,
 					unsigned int target_freq,
 					unsigned int relation)
 {
@@ -414,13 +414,13 @@ static int __pmac pmac_cpufreq_target(	struct cpufreq_policy *policy,
 	return do_set_cpu_speed(newstate, 1);
 }
 
-unsigned int __pmac pmac_get_one_cpufreq(int i)
+unsigned int pmac_get_one_cpufreq(int i)
 {
 	/* Supports only one CPU for now */
 	return (i == 0) ? cur_freq : 0;
 }
 
-static int __pmac pmac_cpufreq_cpu_init(struct cpufreq_policy *policy)
+static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy)
 {
 	if (policy->cpu != 0)
 		return -ENODEV;
@@ -433,7 +433,7 @@ static int __pmac pmac_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	return cpufreq_frequency_table_cpuinfo(policy, pmac_cpu_freqs);
 }
 
-static u32 __pmac read_gpio(struct device_node *np)
+static u32 read_gpio(struct device_node *np)
 {
 	u32 *reg = (u32 *)get_property(np, "reg", NULL);
 	u32 offset;
@@ -452,7 +452,7 @@ static u32 __pmac read_gpio(struct device_node *np)
 	return offset;
 }
 
-static int __pmac pmac_cpufreq_suspend(struct cpufreq_policy *policy, pm_message_t pmsg)
+static int pmac_cpufreq_suspend(struct cpufreq_policy *policy, pm_message_t pmsg)
 {
 	/* Ok, this could be made a bit smarter, but let's be robust for now. We
 	 * always force a speed change to high speed before sleep, to make sure
@@ -468,7 +468,7 @@ static int __pmac pmac_cpufreq_suspend(struct cpufreq_policy *policy, pm_message
 	return 0;
 }
 
-static int __pmac pmac_cpufreq_resume(struct cpufreq_policy *policy)
+static int pmac_cpufreq_resume(struct cpufreq_policy *policy)
 {
 	/* If we resume, first check if we have a get() function */
 	if (get_speed_proc)
@@ -501,7 +501,7 @@ static struct cpufreq_driver pmac_cpufreq_driver = {
 };
 
 
-static int __pmac pmac_cpufreq_init_MacRISC3(struct device_node *cpunode)
+static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode)
 {
 	struct device_node *volt_gpio_np = of_find_node_by_name(NULL,
 								"voltage-gpio");
@@ -593,7 +593,7 @@ static int __pmac pmac_cpufreq_init_MacRISC3(struct device_node *cpunode)
 	return 0;
 }
 
-static int __pmac pmac_cpufreq_init_7447A(struct device_node *cpunode)
+static int pmac_cpufreq_init_7447A(struct device_node *cpunode)
 {
 	struct device_node *volt_gpio_np;
 
@@ -620,7 +620,7 @@ static int __pmac pmac_cpufreq_init_7447A(struct device_node *cpunode)
 	return 0;
 }
 
-static int __pmac pmac_cpufreq_init_750FX(struct device_node *cpunode)
+static int pmac_cpufreq_init_750FX(struct device_node *cpunode)
 {
 	struct device_node *volt_gpio_np;
 	u32 pvr, *value;
@@ -695,6 +695,13 @@ static int __init pmac_cpufreq_setup(void)
 		set_speed_proc = pmu_set_cpu_speed;
 		is_pmu_based = 1;
 	}
+	/* Else check for TiPb 550 */
+	else if (machine_is_compatible("PowerBook3,3") && cur_freq == 550000) {
+		hi_freq = cur_freq;
+		low_freq = 500000;
+		set_speed_proc = pmu_set_cpu_speed;
+		is_pmu_based = 1;
+	}
 	/* Else check for TiPb 400 & 500 */
 	else if (machine_is_compatible("PowerBook3,2")) {
 		/* We only know about the 400 MHz and the 500Mhz model
diff --git a/arch/ppc/platforms/pmac_feature.c b/arch/ppc/platforms/pmac_feature.c
index 867336ad5d36..1e69b0593162 100644
--- a/arch/ppc/platforms/pmac_feature.c
+++ b/arch/ppc/platforms/pmac_feature.c
@@ -63,7 +63,7 @@ extern struct device_node *k2_skiplist[2];
  * We use a single global lock to protect accesses. Each driver has
  * to take care of its own locking
  */
-static DEFINE_SPINLOCK(feature_lock  __pmacdata);
+static DEFINE_SPINLOCK(feature_lock);
 
 #define LOCK(flags)	spin_lock_irqsave(&feature_lock, flags);
 #define UNLOCK(flags)	spin_unlock_irqrestore(&feature_lock, flags);
@@ -72,9 +72,9 @@ static DEFINE_SPINLOCK(feature_lock  __pmacdata);
 /*
  * Instance of some macio stuffs
  */
-struct macio_chip macio_chips[MAX_MACIO_CHIPS]  __pmacdata;
+struct macio_chip macio_chips[MAX_MACIO_CHIPS];
 
-struct macio_chip* __pmac macio_find(struct device_node* child, int type)
+struct macio_chip* macio_find(struct device_node* child, int type)
 {
 	while(child) {
 		int	i;
@@ -89,7 +89,7 @@ struct macio_chip* __pmac macio_find(struct device_node* child, int type)
 }
 EXPORT_SYMBOL_GPL(macio_find);
 
-static const char* macio_names[] __pmacdata =
+static const char* macio_names[] =
 {
 	"Unknown",
 	"Grand Central",
@@ -116,10 +116,10 @@ static const char* macio_names[] __pmacdata =
 #define UN_BIS(r,v)	(UN_OUT((r), UN_IN(r) | (v)))
 #define UN_BIC(r,v)	(UN_OUT((r), UN_IN(r) & ~(v)))
 
-static struct device_node* uninorth_node __pmacdata;
-static u32 __iomem * uninorth_base __pmacdata;
-static u32 uninorth_rev __pmacdata;
-static int uninorth_u3 __pmacdata;
+static struct device_node* uninorth_node;
+static u32 __iomem * uninorth_base;
+static u32 uninorth_rev;
+static int uninorth_u3;
 static void __iomem *u3_ht;
 
 /*
@@ -142,13 +142,13 @@ struct pmac_mb_def
 	struct feature_table_entry* 	features;
 	unsigned long			board_flags;
 };
-static struct pmac_mb_def pmac_mb __pmacdata;
+static struct pmac_mb_def pmac_mb;
 
 /*
  * Here are the chip specific feature functions
  */
 
-static inline int __pmac
+static inline int
 simple_feature_tweak(struct device_node* node, int type, int reg, u32 mask, int value)
 {
 	struct macio_chip*	macio;
@@ -170,7 +170,7 @@ simple_feature_tweak(struct device_node* node, int type, int reg, u32 mask, int
 
 #ifndef CONFIG_POWER4
 
-static long __pmac
+static long
 ohare_htw_scc_enable(struct device_node* node, long param, long value)
 {
 	struct macio_chip*	macio;
@@ -263,21 +263,21 @@ ohare_htw_scc_enable(struct device_node* node, long param, long value)
 	return 0;
 }
 
-static long __pmac
+static long
 ohare_floppy_enable(struct device_node* node, long param, long value)
 {
 	return simple_feature_tweak(node, macio_ohare,
 		OHARE_FCR, OH_FLOPPY_ENABLE, value);
 }
 
-static long __pmac
+static long
 ohare_mesh_enable(struct device_node* node, long param, long value)
 {
 	return simple_feature_tweak(node, macio_ohare,
 		OHARE_FCR, OH_MESH_ENABLE, value);
 }
 
-static long __pmac
+static long
 ohare_ide_enable(struct device_node* node, long param, long value)
 {
 	switch(param) {
@@ -298,7 +298,7 @@ ohare_ide_enable(struct device_node* node, long param, long value)
 	}
 }
 
-static long __pmac
+static long
 ohare_ide_reset(struct device_node* node, long param, long value)
 {
 	switch(param) {
@@ -313,7 +313,7 @@ ohare_ide_reset(struct device_node* node, long param, long value)
 	}
 }
 
-static long __pmac
+static long
 ohare_sleep_state(struct device_node* node, long param, long value)
 {
 	struct macio_chip*	macio = &macio_chips[0];
@@ -329,7 +329,7 @@ ohare_sleep_state(struct device_node* node, long param, long value)
 	return 0;
 }
 
-static long __pmac
+static long
 heathrow_modem_enable(struct device_node* node, long param, long value)
 {
 	struct macio_chip*	macio;
@@ -373,7 +373,7 @@ heathrow_modem_enable(struct device_node* node, long param, long value)
 	return 0;
 }
 
-static long __pmac
+static long
 heathrow_floppy_enable(struct device_node* node, long param, long value)
 {
 	return simple_feature_tweak(node, macio_unknown,
@@ -382,7 +382,7 @@ heathrow_floppy_enable(struct device_node* node, long param, long value)
 		value);
 }
 
-static long __pmac
+static long
 heathrow_mesh_enable(struct device_node* node, long param, long value)
 {
 	struct macio_chip*	macio;
@@ -411,7 +411,7 @@ heathrow_mesh_enable(struct device_node* node, long param, long value)
 	return 0;
 }
 
-static long __pmac
+static long
 heathrow_ide_enable(struct device_node* node, long param, long value)
 {
 	switch(param) {
@@ -426,7 +426,7 @@ heathrow_ide_enable(struct device_node* node, long param, long value)
 	}
 }
 
-static long __pmac
+static long
 heathrow_ide_reset(struct device_node* node, long param, long value)
 {
 	switch(param) {
@@ -441,7 +441,7 @@ heathrow_ide_reset(struct device_node* node, long param, long value)
 	}
 }
 
-static long __pmac
+static long
 heathrow_bmac_enable(struct device_node* node, long param, long value)
 {
 	struct macio_chip*	macio;
@@ -470,7 +470,7 @@ heathrow_bmac_enable(struct device_node* node, long param, long value)
 	return 0;
 }
 
-static long __pmac
+static long
 heathrow_sound_enable(struct device_node* node, long param, long value)
 {
 	struct macio_chip*	macio;
@@ -501,16 +501,16 @@ heathrow_sound_enable(struct device_node* node, long param, long value)
 	return 0;
 }
 
-static u32 save_fcr[6] __pmacdata;
-static u32 save_mbcr __pmacdata;
-static u32 save_gpio_levels[2] __pmacdata;
-static u8 save_gpio_extint[KEYLARGO_GPIO_EXTINT_CNT] __pmacdata;
-static u8 save_gpio_normal[KEYLARGO_GPIO_CNT] __pmacdata;
-static u32 save_unin_clock_ctl __pmacdata;
-static struct dbdma_regs save_dbdma[13] __pmacdata;
-static struct dbdma_regs save_alt_dbdma[13] __pmacdata;
+static u32 save_fcr[6];
+static u32 save_mbcr;
+static u32 save_gpio_levels[2];
+static u8 save_gpio_extint[KEYLARGO_GPIO_EXTINT_CNT];
+static u8 save_gpio_normal[KEYLARGO_GPIO_CNT];
+static u32 save_unin_clock_ctl;
+static struct dbdma_regs save_dbdma[13];
+static struct dbdma_regs save_alt_dbdma[13];
 
-static void __pmac
+static void
 dbdma_save(struct macio_chip* macio, struct dbdma_regs* save)
 {
 	int i;
@@ -527,7 +527,7 @@ dbdma_save(struct macio_chip* macio, struct dbdma_regs* save)
 	}
 }
 
-static void __pmac
+static void
 dbdma_restore(struct macio_chip* macio, struct dbdma_regs* save)
 {
 	int i;
@@ -547,7 +547,7 @@ dbdma_restore(struct macio_chip* macio, struct dbdma_regs* save)
 	}
 }
 
-static void __pmac
+static void
 heathrow_sleep(struct macio_chip* macio, int secondary)
 {
 	if (secondary) {
@@ -580,7 +580,7 @@ heathrow_sleep(struct macio_chip* macio, int secondary)
 	(void)MACIO_IN32(HEATHROW_FCR);
 }
 
-static void __pmac
+static void
 heathrow_wakeup(struct macio_chip* macio, int secondary)
 {
 	if (secondary) {
@@ -605,7 +605,7 @@ heathrow_wakeup(struct macio_chip* macio, int secondary)
 	}
 }
 
-static long __pmac
+static long
 heathrow_sleep_state(struct device_node* node, long param, long value)
 {
 	if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0)
@@ -622,7 +622,7 @@ heathrow_sleep_state(struct device_node* node, long param, long value)
 	return 0;
 }
 
-static long __pmac
+static long
 core99_scc_enable(struct device_node* node, long param, long value)
 {
 	struct macio_chip*	macio;
@@ -723,7 +723,7 @@ core99_scc_enable(struct device_node* node, long param, long value)
 	return 0;
 }
 
-static long __pmac
+static long
 core99_modem_enable(struct device_node* node, long param, long value)
 {
 	struct macio_chip*	macio;
@@ -775,7 +775,7 @@ core99_modem_enable(struct device_node* node, long param, long value)
 	return 0;
 }
 
-static long __pmac
+static long
 pangea_modem_enable(struct device_node* node, long param, long value)
 {
 	struct macio_chip*	macio;
@@ -830,7 +830,7 @@ pangea_modem_enable(struct device_node* node, long param, long value)
 	return 0;
 }
 
-static long __pmac
+static long
 core99_ata100_enable(struct device_node* node, long value)
 {
 	unsigned long flags;
@@ -860,7 +860,7 @@ core99_ata100_enable(struct device_node* node, long value)
     	return 0;
 }
 
-static long __pmac
+static long
 core99_ide_enable(struct device_node* node, long param, long value)
 {
 	/* Bus ID 0 to 2 are KeyLargo based IDE, busID 3 is U2
@@ -883,7 +883,7 @@ core99_ide_enable(struct device_node* node, long param, long value)
 	}
 }
 
-static long __pmac
+static long
 core99_ide_reset(struct device_node* node, long param, long value)
 {
 	switch(param) {
@@ -901,7 +901,7 @@ core99_ide_reset(struct device_node* node, long param, long value)
 	}
 }
 
-static long __pmac
+static long
 core99_gmac_enable(struct device_node* node, long param, long value)
 {
 	unsigned long flags;
@@ -918,7 +918,7 @@ core99_gmac_enable(struct device_node* node, long param, long value)
 	return 0;
 }
 
-static long __pmac
+static long
 core99_gmac_phy_reset(struct device_node* node, long param, long value)
 {
 	unsigned long flags;
@@ -943,7 +943,7 @@ core99_gmac_phy_reset(struct device_node* node, long param, long value)
 	return 0;
 }
 
-static long __pmac
+static long
 core99_sound_chip_enable(struct device_node* node, long param, long value)
 {
 	struct macio_chip*	macio;
@@ -973,7 +973,7 @@ core99_sound_chip_enable(struct device_node* node, long param, long value)
 	return 0;
 }
 
-static long __pmac
+static long
 core99_airport_enable(struct device_node* node, long param, long value)
 {
 	struct macio_chip*	macio;
@@ -1060,7 +1060,7 @@ core99_airport_enable(struct device_node* node, long param, long value)
 }
 
 #ifdef CONFIG_SMP
-static long __pmac
+static long
 core99_reset_cpu(struct device_node* node, long param, long value)
 {
 	unsigned int reset_io = 0;
@@ -1104,7 +1104,7 @@ core99_reset_cpu(struct device_node* node, long param, long value)
 }
 #endif /* CONFIG_SMP */
 
-static long __pmac
+static long
 core99_usb_enable(struct device_node* node, long param, long value)
 {
 	struct macio_chip* macio;
@@ -1257,7 +1257,7 @@ core99_usb_enable(struct device_node* node, long param, long value)
 	return 0;
 }
 
-static long __pmac
+static long
 core99_firewire_enable(struct device_node* node, long param, long value)
 {
 	unsigned long flags;
@@ -1284,7 +1284,7 @@ core99_firewire_enable(struct device_node* node, long param, long value)
 	return 0;
 }
 
-static long __pmac
+static long
 core99_firewire_cable_power(struct device_node* node, long param, long value)
 {
 	unsigned long flags;
@@ -1315,7 +1315,7 @@ core99_firewire_cable_power(struct device_node* node, long param, long value)
 	return 0;
 }
 
-static long __pmac
+static long
 intrepid_aack_delay_enable(struct device_node* node, long param, long value)
 {
 	unsigned long flags;
@@ -1336,7 +1336,7 @@ intrepid_aack_delay_enable(struct device_node* node, long param, long value)
 
 #endif /* CONFIG_POWER4 */
 
-static long __pmac
+static long
 core99_read_gpio(struct device_node* node, long param, long value)
 {
 	struct macio_chip* macio = &macio_chips[0];
@@ -1345,7 +1345,7 @@ core99_read_gpio(struct device_node* node, long param, long value)
 }
 
 
-static long __pmac
+static long
 core99_write_gpio(struct device_node* node, long param, long value)
 {
 	struct macio_chip* macio = &macio_chips[0];
@@ -1356,7 +1356,7 @@ core99_write_gpio(struct device_node* node, long param, long value)
 
 #ifdef CONFIG_POWER4
 
-static long __pmac
+static long
 g5_gmac_enable(struct device_node* node, long param, long value)
 {
 	struct macio_chip* macio = &macio_chips[0];
@@ -1380,7 +1380,7 @@ g5_gmac_enable(struct device_node* node, long param, long value)
 	return 0;
 }
 
-static long __pmac
+static long
 g5_fw_enable(struct device_node* node, long param, long value)
 {
 	struct macio_chip* macio = &macio_chips[0];
@@ -1403,7 +1403,7 @@ g5_fw_enable(struct device_node* node, long param, long value)
 	return 0;
 }
 
-static long __pmac
+static long
 g5_mpic_enable(struct device_node* node, long param, long value)
 {
 	unsigned long flags;
@@ -1419,7 +1419,7 @@ g5_mpic_enable(struct device_node* node, long param, long value)
 }
 
 #ifdef CONFIG_SMP
-static long __pmac
+static long
 g5_reset_cpu(struct device_node* node, long param, long value)
 {
 	unsigned int reset_io = 0;
@@ -1465,7 +1465,7 @@ g5_reset_cpu(struct device_node* node, long param, long value)
  * This takes the second CPU off the bus on dual CPU machines
  * running UP
  */
-void __pmac g5_phy_disable_cpu1(void)
+void g5_phy_disable_cpu1(void)
 {
 	UN_OUT(U3_API_PHY_CONFIG_1, 0);
 }
@@ -1474,7 +1474,7 @@ void __pmac g5_phy_disable_cpu1(void)
 
 #ifndef CONFIG_POWER4
 
-static void __pmac
+static void
 keylargo_shutdown(struct macio_chip* macio, int sleep_mode)
 {
 	u32 temp;
@@ -1528,7 +1528,7 @@ keylargo_shutdown(struct macio_chip* macio, int sleep_mode)
 	(void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1);
 }
 
-static void __pmac
+static void
 pangea_shutdown(struct macio_chip* macio, int sleep_mode)
 {
 	u32 temp;
@@ -1562,7 +1562,7 @@ pangea_shutdown(struct macio_chip* macio, int sleep_mode)
 	(void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1);
 }
 
-static void __pmac
+static void
 intrepid_shutdown(struct macio_chip* macio, int sleep_mode)
 {
 	u32 temp;
@@ -1591,7 +1591,7 @@ intrepid_shutdown(struct macio_chip* macio, int sleep_mode)
 }
 
 
-void __pmac pmac_tweak_clock_spreading(int enable)
+void pmac_tweak_clock_spreading(int enable)
 {
 	struct macio_chip* macio = &macio_chips[0];
 
@@ -1698,7 +1698,7 @@ void __pmac pmac_tweak_clock_spreading(int enable)
 }
 
 
-static int __pmac
+static int
 core99_sleep(void)
 {
 	struct macio_chip* macio;
@@ -1791,7 +1791,7 @@ core99_sleep(void)
 	return 0;
 }
 
-static int __pmac
+static int
 core99_wake_up(void)
 {
 	struct macio_chip* macio;
@@ -1854,7 +1854,7 @@ core99_wake_up(void)
 	return 0;
 }
 
-static long __pmac
+static long
 core99_sleep_state(struct device_node* node, long param, long value)
 {
 	/* Param == 1 means to enter the "fake sleep" mode that is
@@ -1884,7 +1884,7 @@ core99_sleep_state(struct device_node* node, long param, long value)
 
 #endif /* CONFIG_POWER4 */
 
-static long __pmac
+static long
 generic_dev_can_wake(struct device_node* node, long param, long value)
 {
 	/* Todo: eventually check we are really dealing with on-board
@@ -1896,7 +1896,7 @@ generic_dev_can_wake(struct device_node* node, long param, long value)
 	return 0;
 }
 
-static long __pmac
+static long
 generic_get_mb_info(struct device_node* node, long param, long value)
 {
 	switch(param) {
@@ -1919,7 +1919,7 @@ generic_get_mb_info(struct device_node* node, long param, long value)
 
 /* Used on any machine
  */
-static struct feature_table_entry any_features[]  __pmacdata = {
+static struct feature_table_entry any_features[] = {
 	{ PMAC_FTR_GET_MB_INFO,		generic_get_mb_info },
 	{ PMAC_FTR_DEVICE_CAN_WAKE,	generic_dev_can_wake },
 	{ 0, NULL }
@@ -1931,7 +1931,7 @@ static struct feature_table_entry any_features[]  __pmacdata = {
  * 2400,3400 and 3500 series powerbooks. Some older desktops seem
  * to have issues with turning on/off those asic cells
  */
-static struct feature_table_entry ohare_features[]  __pmacdata = {
+static struct feature_table_entry ohare_features[] = {
 	{ PMAC_FTR_SCC_ENABLE,		ohare_htw_scc_enable },
 	{ PMAC_FTR_SWIM3_ENABLE,	ohare_floppy_enable },
 	{ PMAC_FTR_MESH_ENABLE,		ohare_mesh_enable },
@@ -1945,7 +1945,7 @@ static struct feature_table_entry ohare_features[]  __pmacdata = {
  * Separated as some features couldn't be properly tested
  * and the serial port control bits appear to confuse it.
  */
-static struct feature_table_entry heathrow_desktop_features[]  __pmacdata = {
+static struct feature_table_entry heathrow_desktop_features[] = {
 	{ PMAC_FTR_SWIM3_ENABLE,	heathrow_floppy_enable },
 	{ PMAC_FTR_MESH_ENABLE,		heathrow_mesh_enable },
 	{ PMAC_FTR_IDE_ENABLE,		heathrow_ide_enable },
@@ -1957,7 +1957,7 @@ static struct feature_table_entry heathrow_desktop_features[]  __pmacdata = {
 /* Heathrow based laptop, that is the Wallstreet and mainstreet
  * powerbooks.
  */
-static struct feature_table_entry heathrow_laptop_features[]  __pmacdata = {
+static struct feature_table_entry heathrow_laptop_features[] = {
 	{ PMAC_FTR_SCC_ENABLE,		ohare_htw_scc_enable },
 	{ PMAC_FTR_MODEM_ENABLE,	heathrow_modem_enable },
 	{ PMAC_FTR_SWIM3_ENABLE,	heathrow_floppy_enable },
@@ -1973,7 +1973,7 @@ static struct feature_table_entry heathrow_laptop_features[]  __pmacdata = {
 /* Paddington based machines
  * The lombard (101) powerbook, first iMac models, B&W G3 and Yikes G4.
  */
-static struct feature_table_entry paddington_features[]  __pmacdata = {
+static struct feature_table_entry paddington_features[] = {
 	{ PMAC_FTR_SCC_ENABLE,		ohare_htw_scc_enable },
 	{ PMAC_FTR_MODEM_ENABLE,	heathrow_modem_enable },
 	{ PMAC_FTR_SWIM3_ENABLE,	heathrow_floppy_enable },
@@ -1991,7 +1991,7 @@ static struct feature_table_entry paddington_features[]  __pmacdata = {
  * chipset. The pangea chipset is the "combo" UniNorth/KeyLargo
  * used on iBook2 & iMac "flow power".
  */
-static struct feature_table_entry core99_features[]  __pmacdata = {
+static struct feature_table_entry core99_features[] = {
 	{ PMAC_FTR_SCC_ENABLE,		core99_scc_enable },
 	{ PMAC_FTR_MODEM_ENABLE,	core99_modem_enable },
 	{ PMAC_FTR_IDE_ENABLE,		core99_ide_enable },
@@ -2014,7 +2014,7 @@ static struct feature_table_entry core99_features[]  __pmacdata = {
 
 /* RackMac
  */
-static struct feature_table_entry rackmac_features[]  __pmacdata = {
+static struct feature_table_entry rackmac_features[] = {
 	{ PMAC_FTR_SCC_ENABLE,		core99_scc_enable },
 	{ PMAC_FTR_IDE_ENABLE,		core99_ide_enable },
 	{ PMAC_FTR_IDE_RESET,		core99_ide_reset },
@@ -2034,7 +2034,7 @@ static struct feature_table_entry rackmac_features[]  __pmacdata = {
 
 /* Pangea features
  */
-static struct feature_table_entry pangea_features[]  __pmacdata = {
+static struct feature_table_entry pangea_features[] = {
 	{ PMAC_FTR_SCC_ENABLE,		core99_scc_enable },
 	{ PMAC_FTR_MODEM_ENABLE,	pangea_modem_enable },
 	{ PMAC_FTR_IDE_ENABLE,		core99_ide_enable },
@@ -2054,7 +2054,7 @@ static struct feature_table_entry pangea_features[]  __pmacdata = {
 
 /* Intrepid features
  */
-static struct feature_table_entry intrepid_features[]  __pmacdata = {
+static struct feature_table_entry intrepid_features[] = {
 	{ PMAC_FTR_SCC_ENABLE,		core99_scc_enable },
 	{ PMAC_FTR_MODEM_ENABLE,	pangea_modem_enable },
 	{ PMAC_FTR_IDE_ENABLE,		core99_ide_enable },
@@ -2077,7 +2077,7 @@ static struct feature_table_entry intrepid_features[]  __pmacdata = {
 
 /* G5 features
  */
-static struct feature_table_entry g5_features[]  __pmacdata = {
+static struct feature_table_entry g5_features[] = {
 	{ PMAC_FTR_GMAC_ENABLE,		g5_gmac_enable },
 	{ PMAC_FTR_1394_ENABLE,		g5_fw_enable },
 	{ PMAC_FTR_ENABLE_MPIC,		g5_mpic_enable },
@@ -2091,7 +2091,7 @@ static struct feature_table_entry g5_features[]  __pmacdata = {
 
 #endif /* CONFIG_POWER4 */
 
-static struct pmac_mb_def pmac_mb_defs[] __pmacdata = {
+static struct pmac_mb_def pmac_mb_defs[] = {
 #ifndef CONFIG_POWER4
 	/*
 	 * Desktops
@@ -2317,6 +2317,14 @@ static struct pmac_mb_def pmac_mb_defs[] __pmacdata = {
 		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
 		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
 	},
+	{	"PowerBook5,8",			"PowerBook G4 15\"",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
+	{	"PowerBook5,9",			"PowerBook G4 17\"",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
 	{	"PowerBook6,1",			"PowerBook G4 12\"",
 		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
 		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
@@ -2337,6 +2345,10 @@ static struct pmac_mb_def pmac_mb_defs[] __pmacdata = {
 		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
 		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
 	},
+	{	"PowerBook6,7",			"iBook G4",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
 	{	"PowerBook6,8",			"PowerBook G4 12\"",
 		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
 		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
@@ -2352,7 +2364,7 @@ static struct pmac_mb_def pmac_mb_defs[] __pmacdata = {
 /*
  * The toplevel feature_call callback
  */
-long __pmac
+long
 pmac_do_feature_call(unsigned int selector, ...)
 {
 	struct device_node* node;
@@ -2935,8 +2947,8 @@ void __init pmac_check_ht_link(void)
  * Early video resume hook
  */
 
-static void (*pmac_early_vresume_proc)(void *data) __pmacdata;
-static void *pmac_early_vresume_data __pmacdata;
+static void (*pmac_early_vresume_proc)(void *data);
+static void *pmac_early_vresume_data;
 
 void pmac_set_early_video_resume(void (*proc)(void *data), void *data)
 {
@@ -2949,7 +2961,7 @@ void pmac_set_early_video_resume(void (*proc)(void *data), void *data)
 }
 EXPORT_SYMBOL(pmac_set_early_video_resume);
 
-void __pmac pmac_call_early_video_resume(void)
+void pmac_call_early_video_resume(void)
 {
 	if (pmac_early_vresume_proc)
 		pmac_early_vresume_proc(pmac_early_vresume_data);
@@ -2959,11 +2971,11 @@ void __pmac pmac_call_early_video_resume(void)
  * AGP related suspend/resume code
  */
 
-static struct pci_dev *pmac_agp_bridge __pmacdata;
-static int (*pmac_agp_suspend)(struct pci_dev *bridge) __pmacdata;
-static int (*pmac_agp_resume)(struct pci_dev *bridge) __pmacdata;
+static struct pci_dev *pmac_agp_bridge;
+static int (*pmac_agp_suspend)(struct pci_dev *bridge);
+static int (*pmac_agp_resume)(struct pci_dev *bridge);
 
-void __pmac pmac_register_agp_pm(struct pci_dev *bridge,
+void pmac_register_agp_pm(struct pci_dev *bridge,
 				 int (*suspend)(struct pci_dev *bridge),
 				 int (*resume)(struct pci_dev *bridge))
 {
@@ -2980,7 +2992,7 @@ void __pmac pmac_register_agp_pm(struct pci_dev *bridge,
 }
 EXPORT_SYMBOL(pmac_register_agp_pm);
 
-void __pmac pmac_suspend_agp_for_card(struct pci_dev *dev)
+void pmac_suspend_agp_for_card(struct pci_dev *dev)
 {
 	if (pmac_agp_bridge == NULL || pmac_agp_suspend == NULL)
 		return;
@@ -2990,7 +3002,7 @@ void __pmac pmac_suspend_agp_for_card(struct pci_dev *dev)
 }
 EXPORT_SYMBOL(pmac_suspend_agp_for_card);
 
-void __pmac pmac_resume_agp_for_card(struct pci_dev *dev)
+void pmac_resume_agp_for_card(struct pci_dev *dev)
 {
 	if (pmac_agp_bridge == NULL || pmac_agp_resume == NULL)
 		return;
diff --git a/arch/ppc/platforms/pmac_nvram.c b/arch/ppc/platforms/pmac_nvram.c
index c9de64205996..8c9b008c7226 100644
--- a/arch/ppc/platforms/pmac_nvram.c
+++ b/arch/ppc/platforms/pmac_nvram.c
@@ -88,17 +88,17 @@ extern int system_running;
 static int (*core99_write_bank)(int bank, u8* datas);
 static int (*core99_erase_bank)(int bank);
 
-static char *nvram_image __pmacdata;
+static char *nvram_image;
 
 
-static unsigned char __pmac core99_nvram_read_byte(int addr)
+static unsigned char core99_nvram_read_byte(int addr)
 {
 	if (nvram_image == NULL)
 		return 0xff;
 	return nvram_image[addr];
 }
 
-static void __pmac core99_nvram_write_byte(int addr, unsigned char val)
+static void core99_nvram_write_byte(int addr, unsigned char val)
 {
 	if (nvram_image == NULL)
 		return;
@@ -106,18 +106,18 @@ static void __pmac core99_nvram_write_byte(int addr, unsigned char val)
 }
 
 
-static unsigned char __openfirmware direct_nvram_read_byte(int addr)
+static unsigned char direct_nvram_read_byte(int addr)
 {
 	return in_8(&nvram_data[(addr & (NVRAM_SIZE - 1)) * nvram_mult]);
 }
 
-static void __openfirmware direct_nvram_write_byte(int addr, unsigned char val)
+static void direct_nvram_write_byte(int addr, unsigned char val)
 {
 	out_8(&nvram_data[(addr & (NVRAM_SIZE - 1)) * nvram_mult], val);
 }
 
 
-static unsigned char __pmac indirect_nvram_read_byte(int addr)
+static unsigned char indirect_nvram_read_byte(int addr)
 {
 	unsigned char val;
 	unsigned long flags;
@@ -130,7 +130,7 @@ static unsigned char __pmac indirect_nvram_read_byte(int addr)
 	return val;
 }
 
-static void __pmac indirect_nvram_write_byte(int addr, unsigned char val)
+static void indirect_nvram_write_byte(int addr, unsigned char val)
 {
 	unsigned long flags;
 
@@ -143,13 +143,13 @@ static void __pmac indirect_nvram_write_byte(int addr, unsigned char val)
 
 #ifdef CONFIG_ADB_PMU
 
-static void __pmac pmu_nvram_complete(struct adb_request *req)
+static void pmu_nvram_complete(struct adb_request *req)
 {
 	if (req->arg)
 		complete((struct completion *)req->arg);
 }
 
-static unsigned char __pmac pmu_nvram_read_byte(int addr)
+static unsigned char pmu_nvram_read_byte(int addr)
 {
 	struct adb_request req;
 	DECLARE_COMPLETION(req_complete); 
@@ -165,7 +165,7 @@ static unsigned char __pmac pmu_nvram_read_byte(int addr)
 	return req.reply[0];
 }
 
-static void __pmac pmu_nvram_write_byte(int addr, unsigned char val)
+static void pmu_nvram_write_byte(int addr, unsigned char val)
 {
 	struct adb_request req;
 	DECLARE_COMPLETION(req_complete); 
@@ -183,7 +183,7 @@ static void __pmac pmu_nvram_write_byte(int addr, unsigned char val)
 #endif /* CONFIG_ADB_PMU */
 
 
-static u8 __pmac chrp_checksum(struct chrp_header* hdr)
+static u8 chrp_checksum(struct chrp_header* hdr)
 {
 	u8 *ptr;
 	u16 sum = hdr->signature;
@@ -194,7 +194,7 @@ static u8 __pmac chrp_checksum(struct chrp_header* hdr)
 	return sum;
 }
 
-static u32 __pmac core99_calc_adler(u8 *buffer)
+static u32 core99_calc_adler(u8 *buffer)
 {
 	int cnt;
 	u32 low, high;
@@ -216,7 +216,7 @@ static u32 __pmac core99_calc_adler(u8 *buffer)
 	return (high << 16) | low;
 }
 
-static u32 __pmac core99_check(u8* datas)
+static u32 core99_check(u8* datas)
 {
 	struct core99_header* hdr99 = (struct core99_header*)datas;
 
@@ -235,7 +235,7 @@ static u32 __pmac core99_check(u8* datas)
 	return hdr99->generation;
 }
 
-static int __pmac sm_erase_bank(int bank)
+static int sm_erase_bank(int bank)
 {
 	int stat, i;
 	unsigned long timeout;
@@ -267,7 +267,7 @@ static int __pmac sm_erase_bank(int bank)
 	return 0;
 }
 
-static int __pmac sm_write_bank(int bank, u8* datas)
+static int sm_write_bank(int bank, u8* datas)
 {
 	int i, stat = 0;
 	unsigned long timeout;
@@ -302,7 +302,7 @@ static int __pmac sm_write_bank(int bank, u8* datas)
 	return 0;
 }
 
-static int __pmac amd_erase_bank(int bank)
+static int amd_erase_bank(int bank)
 {
 	int i, stat = 0;
 	unsigned long timeout;
@@ -349,7 +349,7 @@ static int __pmac amd_erase_bank(int bank)
 	return 0;
 }
 
-static int __pmac amd_write_bank(int bank, u8* datas)
+static int amd_write_bank(int bank, u8* datas)
 {
 	int i, stat = 0;
 	unsigned long timeout;
@@ -430,7 +430,7 @@ static void __init lookup_partitions(void)
 	DBG("nvram: NR partition at 0x%x\n", nvram_partitions[pmac_nvram_NR]);
 }
 
-static void __pmac core99_nvram_sync(void)
+static void core99_nvram_sync(void)
 {
 	struct core99_header* hdr99;
 	unsigned long flags;
@@ -554,12 +554,12 @@ void __init pmac_nvram_init(void)
 	lookup_partitions();
 }
 
-int __pmac pmac_get_partition(int partition)
+int pmac_get_partition(int partition)
 {
 	return nvram_partitions[partition];
 }
 
-u8 __pmac pmac_xpram_read(int xpaddr)
+u8 pmac_xpram_read(int xpaddr)
 {
 	int offset = nvram_partitions[pmac_nvram_XPRAM];
 
@@ -569,7 +569,7 @@ u8 __pmac pmac_xpram_read(int xpaddr)
 	return ppc_md.nvram_read_val(xpaddr + offset);
 }
 
-void __pmac pmac_xpram_write(int xpaddr, u8 data)
+void pmac_xpram_write(int xpaddr, u8 data)
 {
 	int offset = nvram_partitions[pmac_nvram_XPRAM];
 
diff --git a/arch/ppc/platforms/pmac_pci.c b/arch/ppc/platforms/pmac_pci.c
index 719fb49fe2bc..786295b6ddd0 100644
--- a/arch/ppc/platforms/pmac_pci.c
+++ b/arch/ppc/platforms/pmac_pci.c
@@ -141,7 +141,7 @@ fixup_bus_range(struct device_node *bridge)
 	|(((unsigned long)(off)) & 0xFCUL) \
 	|1UL)
 
-static void volatile __iomem * __pmac
+static void volatile __iomem *
 macrisc_cfg_access(struct pci_controller* hose, u8 bus, u8 dev_fn, u8 offset)
 {
 	unsigned int caddr;
@@ -162,7 +162,7 @@ macrisc_cfg_access(struct pci_controller* hose, u8 bus, u8 dev_fn, u8 offset)
 	return hose->cfg_data + offset;
 }
 
-static int __pmac
+static int
 macrisc_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
 		    int len, u32 *val)
 {
@@ -190,7 +190,7 @@ macrisc_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
 	return PCIBIOS_SUCCESSFUL;
 }
 
-static int __pmac
+static int
 macrisc_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
 		     int len, u32 val)
 {
@@ -230,7 +230,7 @@ static struct pci_ops macrisc_pci_ops =
 /*
  * Verifiy that a specific (bus, dev_fn) exists on chaos
  */
-static int __pmac
+static int
 chaos_validate_dev(struct pci_bus *bus, int devfn, int offset)
 {
 	struct device_node *np;
@@ -252,7 +252,7 @@ chaos_validate_dev(struct pci_bus *bus, int devfn, int offset)
 	return PCIBIOS_SUCCESSFUL;
 }
 
-static int __pmac
+static int
 chaos_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
 		  int len, u32 *val)
 {
@@ -264,7 +264,7 @@ chaos_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
 	return macrisc_read_config(bus, devfn, offset, len, val);
 }
 
-static int __pmac
+static int
 chaos_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
 		   int len, u32 val)
 {
@@ -294,7 +294,7 @@ static struct pci_ops chaos_pci_ops =
 		+ (((unsigned long)bus) << 16) \
 		+ 0x01000000UL)
 
-static void volatile __iomem * __pmac
+static void volatile __iomem *
 u3_ht_cfg_access(struct pci_controller* hose, u8 bus, u8 devfn, u8 offset)
 {
 	if (bus == hose->first_busno) {
@@ -307,7 +307,7 @@ u3_ht_cfg_access(struct pci_controller* hose, u8 bus, u8 devfn, u8 offset)
 		return hose->cfg_data + U3_HT_CFA1(bus, devfn, offset);
 }
 
-static int __pmac
+static int
 u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
 		    int len, u32 *val)
 {
@@ -357,7 +357,7 @@ u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
 	return PCIBIOS_SUCCESSFUL;
 }
 
-static int __pmac
+static int
 u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
 		     int len, u32 val)
 {
@@ -575,7 +575,7 @@ pmac_find_bridges(void)
 	 * some offset between bus number and domains for now when we
 	 * assign all busses should help for now
 	 */
-	if (pci_assign_all_busses)
+	if (pci_assign_all_buses)
 		pcibios_assign_bus_offset = 0x10;
 
 #ifdef CONFIG_POWER4 
@@ -643,7 +643,7 @@ static inline void grackle_set_loop_snoop(struct pci_controller *bp, int enable)
 static int __init
 setup_uninorth(struct pci_controller* hose, struct reg_property* addr)
 {
-	pci_assign_all_busses = 1;
+	pci_assign_all_buses = 1;
 	has_uninorth = 1;
 	hose->ops = &macrisc_pci_ops;
 	hose->cfg_addr = ioremap(addr->address + 0x800000, 0x1000);
@@ -677,7 +677,7 @@ setup_u3_agp(struct pci_controller* hose, struct reg_property* addr)
 {
 	/* On G5, we move AGP up to high bus number so we don't need
 	 * to reassign bus numbers for HT. If we ever have P2P bridges
-	 * on AGP, we'll have to move pci_assign_all_busses to the
+	 * on AGP, we'll have to move pci_assign_all_buses to the
 	 * pci_controller structure so we enable it for AGP and not for
 	 * HT childs.
 	 * We hard code the address because of the different size of
@@ -899,7 +899,7 @@ pmac_pcibios_fixup(void)
 	pcibios_fixup_OF_interrupts();
 }
 
-int __pmac
+int
 pmac_pci_enable_device_hook(struct pci_dev *dev, int initial)
 {
 	struct device_node* node;
@@ -1096,7 +1096,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pmac_pci_fixup_pciata);
  * Disable second function on K2-SATA, it's broken
  * and disable IO BARs on first one
  */
-void __pmac pmac_pci_fixup_k2_sata(struct pci_dev* dev)
+void pmac_pci_fixup_k2_sata(struct pci_dev* dev)
 {
 	int i;
 	u16 cmd;
diff --git a/arch/ppc/platforms/pmac_pic.c b/arch/ppc/platforms/pmac_pic.c
index 2ce058895e03..4742bf609357 100644
--- a/arch/ppc/platforms/pmac_pic.c
+++ b/arch/ppc/platforms/pmac_pic.c
@@ -35,6 +35,7 @@
 #include <asm/open_pic.h>
 #include <asm/xmon.h>
 #include <asm/pmac_feature.h>
+#include <asm/machdep.h>
 
 #include "pmac_pic.h"
 
@@ -53,7 +54,7 @@ struct pmac_irq_hw {
 };
 
 /* Default addresses */
-static volatile struct pmac_irq_hw *pmac_irq_hw[4] __pmacdata = {
+static volatile struct pmac_irq_hw *pmac_irq_hw[4] = {
         (struct pmac_irq_hw *) 0xf3000020,
         (struct pmac_irq_hw *) 0xf3000010,
         (struct pmac_irq_hw *) 0xf4000020,
@@ -64,22 +65,25 @@ static volatile struct pmac_irq_hw *pmac_irq_hw[4] __pmacdata = {
 #define OHARE_LEVEL_MASK	0x1ff00000
 #define HEATHROW_LEVEL_MASK	0x1ff00000
 
-static int max_irqs __pmacdata;
-static int max_real_irqs __pmacdata;
-static u32 level_mask[4] __pmacdata;
+static int max_irqs;
+static int max_real_irqs;
+static u32 level_mask[4];
 
-static DEFINE_SPINLOCK(pmac_pic_lock __pmacdata);
+static DEFINE_SPINLOCK(pmac_pic_lock);
 
 
 #define GATWICK_IRQ_POOL_SIZE        10
-static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE] __pmacdata;
+static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE];
+
+#define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
+static unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
 
 /*
  * Mark an irq as "lost".  This is only used on the pmac
  * since it can lose interrupts (see pmac_set_irq_mask).
  * -- Cort
  */
-void __pmac
+void
 __set_lost(unsigned long irq_nr, int nokick)
 {
 	if (!test_and_set_bit(irq_nr, ppc_lost_interrupts)) {
@@ -89,7 +93,7 @@ __set_lost(unsigned long irq_nr, int nokick)
 	}
 }
 
-static void __pmac
+static void
 pmac_mask_and_ack_irq(unsigned int irq_nr)
 {
         unsigned long bit = 1UL << (irq_nr & 0x1f);
@@ -114,7 +118,7 @@ pmac_mask_and_ack_irq(unsigned int irq_nr)
 	spin_unlock_irqrestore(&pmac_pic_lock, flags);
 }
 
-static void __pmac pmac_set_irq_mask(unsigned int irq_nr, int nokicklost)
+static void pmac_set_irq_mask(unsigned int irq_nr, int nokicklost)
 {
         unsigned long bit = 1UL << (irq_nr & 0x1f);
         int i = irq_nr >> 5;
@@ -147,7 +151,7 @@ static void __pmac pmac_set_irq_mask(unsigned int irq_nr, int nokicklost)
 /* When an irq gets requested for the first client, if it's an
  * edge interrupt, we clear any previous one on the controller
  */
-static unsigned int __pmac pmac_startup_irq(unsigned int irq_nr)
+static unsigned int pmac_startup_irq(unsigned int irq_nr)
 {
         unsigned long bit = 1UL << (irq_nr & 0x1f);
         int i = irq_nr >> 5;
@@ -160,20 +164,20 @@ static unsigned int __pmac pmac_startup_irq(unsigned int irq_nr)
 	return 0;
 }
 
-static void __pmac pmac_mask_irq(unsigned int irq_nr)
+static void pmac_mask_irq(unsigned int irq_nr)
 {
         clear_bit(irq_nr, ppc_cached_irq_mask);
         pmac_set_irq_mask(irq_nr, 0);
         mb();
 }
 
-static void __pmac pmac_unmask_irq(unsigned int irq_nr)
+static void pmac_unmask_irq(unsigned int irq_nr)
 {
         set_bit(irq_nr, ppc_cached_irq_mask);
         pmac_set_irq_mask(irq_nr, 0);
 }
 
-static void __pmac pmac_end_irq(unsigned int irq_nr)
+static void pmac_end_irq(unsigned int irq_nr)
 {
 	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
 	    && irq_desc[irq_nr].action) {
diff --git a/arch/ppc/platforms/pmac_setup.c b/arch/ppc/platforms/pmac_setup.c
index b392b9a15987..55d2beffe560 100644
--- a/arch/ppc/platforms/pmac_setup.c
+++ b/arch/ppc/platforms/pmac_setup.c
@@ -48,7 +48,6 @@
 #include <linux/adb.h>
 #include <linux/cuda.h>
 #include <linux/pmu.h>
-#include <linux/irq.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
 #include <linux/bitops.h>
@@ -123,7 +122,7 @@ extern struct smp_ops_t psurge_smp_ops;
 extern struct smp_ops_t core99_smp_ops;
 #endif /* CONFIG_SMP */
 
-static int __pmac
+static int
 pmac_show_cpuinfo(struct seq_file *m)
 {
 	struct device_node *np;
@@ -227,7 +226,7 @@ pmac_show_cpuinfo(struct seq_file *m)
 	return 0;
 }
 
-static int __openfirmware
+static int
 pmac_show_percpuinfo(struct seq_file *m, int i)
 {
 #ifdef CONFIG_CPU_FREQ_PMAC
@@ -331,9 +330,9 @@ pmac_setup_arch(void)
 #ifdef CONFIG_SMP
 	/* Check for Core99 */
 	if (find_devices("uni-n") || find_devices("u3"))
-		ppc_md.smp_ops = &core99_smp_ops;
+		smp_ops = &core99_smp_ops;
 	else
-		ppc_md.smp_ops = &psurge_smp_ops;
+		smp_ops = &psurge_smp_ops;
 #endif /* CONFIG_SMP */
 
 	pci_create_OF_bus_map();
@@ -448,7 +447,7 @@ static int pmac_pm_enter(suspend_state_t state)
 	enable_kernel_fp();
 
 #ifdef CONFIG_ALTIVEC
-	if (cur_cpu_spec[0]->cpu_features & CPU_FTR_ALTIVEC)
+	if (cur_cpu_spec->cpu_features & CPU_FTR_ALTIVEC)
 		enable_kernel_altivec();
 #endif /* CONFIG_ALTIVEC */
 
@@ -486,7 +485,7 @@ static int pmac_late_init(void)
 late_initcall(pmac_late_init);
 
 /* can't be __init - can be called whenever a disk is first accessed */
-void __pmac
+void
 note_bootable_part(dev_t dev, int part, int goodness)
 {
 	static int found_boot = 0;
@@ -512,7 +511,7 @@ note_bootable_part(dev_t dev, int part, int goodness)
 	}
 }
 
-static void __pmac
+static void
 pmac_restart(char *cmd)
 {
 #ifdef CONFIG_ADB_CUDA
@@ -537,7 +536,7 @@ pmac_restart(char *cmd)
 	}
 }
 
-static void __pmac
+static void
 pmac_power_off(void)
 {
 #ifdef CONFIG_ADB_CUDA
@@ -562,7 +561,7 @@ pmac_power_off(void)
 	}
 }
 
-static void __pmac
+static void
 pmac_halt(void)
 {
    pmac_power_off();
@@ -662,7 +661,6 @@ pmac_init(unsigned long r3, unsigned long r4, unsigned long r5,
 	ppc_md.setup_arch     = pmac_setup_arch;
 	ppc_md.show_cpuinfo   = pmac_show_cpuinfo;
 	ppc_md.show_percpuinfo = pmac_show_percpuinfo;
-	ppc_md.irq_canonicalize = NULL;
 	ppc_md.init_IRQ       = pmac_pic_init;
 	ppc_md.get_irq        = pmac_get_irq; /* Changed later on ... */
 
@@ -719,7 +717,8 @@ pmac_declare_of_platform_devices(void)
 	if (np) {
 		for (np = np->child; np != NULL; np = np->sibling)
 			if (strncmp(np->name, "i2c", 3) == 0) {
-				of_platform_device_create(np, "uni-n-i2c");
+				of_platform_device_create(np, "uni-n-i2c",
+							  NULL);
 				break;
 			}
 	}
@@ -727,17 +726,18 @@ pmac_declare_of_platform_devices(void)
 	if (np) {
 		for (np = np->child; np != NULL; np = np->sibling)
 			if (strncmp(np->name, "i2c", 3) == 0) {
-				of_platform_device_create(np, "u3-i2c");
+				of_platform_device_create(np, "u3-i2c",
+							  NULL);
 				break;
 			}
 	}
 
 	np = find_devices("valkyrie");
 	if (np)
-		of_platform_device_create(np, "valkyrie");
+		of_platform_device_create(np, "valkyrie", NULL);
 	np = find_devices("platinum");
 	if (np)
-		of_platform_device_create(np, "platinum");
+		of_platform_device_create(np, "platinum", NULL);
 
 	return 0;
 }
diff --git a/arch/ppc/platforms/pmac_sleep.S b/arch/ppc/platforms/pmac_sleep.S
index 88419c77ac43..22b113d19b24 100644
--- a/arch/ppc/platforms/pmac_sleep.S
+++ b/arch/ppc/platforms/pmac_sleep.S
@@ -387,10 +387,10 @@ turn_on_mmu:
 #endif /* defined(CONFIG_PM) || defined(CONFIG_CPU_FREQ) */
 
 	.section .data
-	.balign	L1_CACHE_LINE_SIZE
+	.balign	L1_CACHE_BYTES
 sleep_storage:
 	.long 0
-	.balign	L1_CACHE_LINE_SIZE, 0
+	.balign	L1_CACHE_BYTES, 0
 
 #endif /* CONFIG_6xx */
 	.section .text
diff --git a/arch/ppc/platforms/pmac_smp.c b/arch/ppc/platforms/pmac_smp.c
index 794a23994b82..26ff26238f03 100644
--- a/arch/ppc/platforms/pmac_smp.c
+++ b/arch/ppc/platforms/pmac_smp.c
@@ -186,7 +186,7 @@ static inline void psurge_clr_ipi(int cpu)
  */
 static unsigned long psurge_smp_message[NR_CPUS];
 
-void __pmac psurge_smp_message_recv(struct pt_regs *regs)
+void psurge_smp_message_recv(struct pt_regs *regs)
 {
 	int cpu = smp_processor_id();
 	int msg;
@@ -203,14 +203,13 @@ void __pmac psurge_smp_message_recv(struct pt_regs *regs)
 			smp_message_recv(msg, regs);
 }
 
-irqreturn_t __pmac psurge_primary_intr(int irq, void *d, struct pt_regs *regs)
+irqreturn_t psurge_primary_intr(int irq, void *d, struct pt_regs *regs)
 {
 	psurge_smp_message_recv(regs);
 	return IRQ_HANDLED;
 }
 
-static void __pmac smp_psurge_message_pass(int target, int msg, unsigned long data,
-					   int wait)
+static void smp_psurge_message_pass(int target, int msg)
 {
 	int i;
 
@@ -629,7 +628,7 @@ void smp_core99_give_timebase(void)
 
 
 /* PowerSurge-style Macs */
-struct smp_ops_t psurge_smp_ops __pmacdata = {
+struct smp_ops_t psurge_smp_ops = {
 	.message_pass	= smp_psurge_message_pass,
 	.probe		= smp_psurge_probe,
 	.kick_cpu	= smp_psurge_kick_cpu,
@@ -639,7 +638,7 @@ struct smp_ops_t psurge_smp_ops __pmacdata = {
 };
 
 /* Core99 Macs (dual G4s) */
-struct smp_ops_t core99_smp_ops __pmacdata = {
+struct smp_ops_t core99_smp_ops = {
 	.message_pass	= smp_openpic_message_pass,
 	.probe		= smp_core99_probe,
 	.kick_cpu	= smp_core99_kick_cpu,
diff --git a/arch/ppc/platforms/pmac_time.c b/arch/ppc/platforms/pmac_time.c
index 778ce4fec368..edb9fcc64790 100644
--- a/arch/ppc/platforms/pmac_time.c
+++ b/arch/ppc/platforms/pmac_time.c
@@ -77,7 +77,7 @@ pmac_time_init(void)
 #endif
 }
 
-unsigned long __pmac
+unsigned long
 pmac_get_rtc_time(void)
 {
 #if defined(CONFIG_ADB_CUDA) || defined(CONFIG_ADB_PMU)
@@ -118,7 +118,7 @@ pmac_get_rtc_time(void)
 	return 0;
 }
 
-int __pmac
+int
 pmac_set_rtc_time(unsigned long nowtime)
 {
 #if defined(CONFIG_ADB_CUDA) || defined(CONFIG_ADB_PMU)
@@ -195,7 +195,7 @@ via_calibrate_decr(void)
 		;
 	dend = get_dec();
 
-	tb_ticks_per_jiffy = (dstart - dend) / (6 * (HZ/100));
+	tb_ticks_per_jiffy = (dstart - dend) / ((6 * HZ)/100);
 	tb_to_us = mulhwu_scale_factor(dstart - dend, 60000);
 
 	printk(KERN_INFO "via_calibrate_decr: ticks per jiffy = %u (%u ticks)\n",
@@ -210,7 +210,7 @@ via_calibrate_decr(void)
 /*
  * Reset the time after a sleep.
  */
-static int __pmac
+static int
 time_sleep_notify(struct pmu_sleep_notifier *self, int when)
 {
 	static unsigned long time_diff;
@@ -235,7 +235,7 @@ time_sleep_notify(struct pmu_sleep_notifier *self, int when)
 	return PBOOK_SLEEP_OK;
 }
 
-static struct pmu_sleep_notifier time_sleep_notifier __pmacdata = {
+static struct pmu_sleep_notifier time_sleep_notifier = {
 	time_sleep_notify, SLEEP_LEVEL_MISC,
 };
 #endif /* CONFIG_PM */
diff --git a/arch/ppc/platforms/powerpmc250.c b/arch/ppc/platforms/powerpmc250.c
index 0abe15159e6c..e6b520e6e13f 100644
--- a/arch/ppc/platforms/powerpmc250.c
+++ b/arch/ppc/platforms/powerpmc250.c
@@ -26,7 +26,6 @@
 #include <linux/initrd.h>
 #include <linux/console.h>
 #include <linux/delay.h>
-#include <linux/irq.h>
 #include <linux/slab.h>
 #include <linux/seq_file.h>
 #include <linux/ide.h>
diff --git a/arch/ppc/platforms/pplus.c b/arch/ppc/platforms/pplus.c
index 65705c911795..22bd40cfb092 100644
--- a/arch/ppc/platforms/pplus.c
+++ b/arch/ppc/platforms/pplus.c
@@ -22,7 +22,6 @@
 #include <linux/ioport.h>
 #include <linux/console.h>
 #include <linux/pci.h>
-#include <linux/irq.h>
 #include <linux/ide.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
@@ -647,14 +646,6 @@ static void pplus_power_off(void)
 	pplus_halt();
 }
 
-static unsigned int pplus_irq_canonicalize(u_int irq)
-{
-	if (irq == 2)
-		return 9;
-	else
-		return irq;
-}
-
 static void __init pplus_init_IRQ(void)
 {
 	int i;
@@ -674,10 +665,7 @@ static void __init pplus_init_IRQ(void)
 		ppc_md.get_irq = openpic_get_irq;
 	}
 
-	for (i = 0; i < NUM_8259_INTERRUPTS; i++)
-		irq_desc[i].handler = &i8259_pic;
-
-	i8259_init(0);
+	i8259_init(0, 0);
 
 	if (ppc_md.progress)
 		ppc_md.progress("init_irq: exit", 0);
@@ -873,10 +861,10 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 	ISA_DMA_THRESHOLD = 0x00ffffff;
 	DMA_MODE_READ = 0x44;
 	DMA_MODE_WRITE = 0x48;
+	ppc_do_canonicalize_irqs = 1;
 
 	ppc_md.setup_arch = pplus_setup_arch;
 	ppc_md.show_cpuinfo = pplus_show_cpuinfo;
-	ppc_md.irq_canonicalize = pplus_irq_canonicalize;
 	ppc_md.init_IRQ = pplus_init_IRQ;
 	/* this gets changed later on if we have an OpenPIC -- Cort */
 	ppc_md.get_irq = i8259_irq;
@@ -912,6 +900,6 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 	ppc_md.kgdb_map_scc = gen550_kgdb_map_scc;
 #endif
 #ifdef CONFIG_SMP
-	ppc_md.smp_ops = &pplus_smp_ops;
+	smp_ops = &pplus_smp_ops;
 #endif				/* CONFIG_SMP */
 }
diff --git a/arch/ppc/platforms/pq2ads.c b/arch/ppc/platforms/pq2ads.c
index 6a1475c1e128..71c9fca1fe9b 100644
--- a/arch/ppc/platforms/pq2ads.c
+++ b/arch/ppc/platforms/pq2ads.c
@@ -3,7 +3,7 @@
  *
  * PQ2ADS platform support
  *
- * Author: Kumar Gala <kumar.gala@freescale.com>
+ * Author: Kumar Gala <galak@kernel.crashing.org>
  * Derived from: est8260_setup.c by Allen Curtis
  *
  * Copyright 2004 Freescale Semiconductor, Inc.
diff --git a/arch/ppc/platforms/prep_pci.c b/arch/ppc/platforms/prep_pci.c
index 4760cb64251d..e50b9996848c 100644
--- a/arch/ppc/platforms/prep_pci.c
+++ b/arch/ppc/platforms/prep_pci.c
@@ -43,7 +43,7 @@ static unsigned long	*ProcInfo;
 /* Tables for known hardware */
 
 /* Motorola PowerStackII - Utah */
-static char Utah_pci_IRQ_map[23] __prepdata =
+static char Utah_pci_IRQ_map[23] =
 {
         0,   /* Slot 0  - unused */
         0,   /* Slot 1  - unused */
@@ -72,7 +72,7 @@ static char Utah_pci_IRQ_map[23] __prepdata =
         0,   /* Slot 22 - unused */
 };
 
-static char Utah_pci_IRQ_routes[] __prepdata =
+static char Utah_pci_IRQ_routes[] =
 {
         0,   /* Line 0 - Unused */
         9,   /* Line 1 */
@@ -84,7 +84,7 @@ static char Utah_pci_IRQ_routes[] __prepdata =
 
 /* Motorola PowerStackII - Omaha */
 /* no integrated SCSI or ethernet */
-static char Omaha_pci_IRQ_map[23] __prepdata =
+static char Omaha_pci_IRQ_map[23] =
 {
         0,   /* Slot 0  - unused */
         0,   /* Slot 1  - unused */
@@ -111,7 +111,7 @@ static char Omaha_pci_IRQ_map[23] __prepdata =
         0,
 };
 
-static char Omaha_pci_IRQ_routes[] __prepdata =
+static char Omaha_pci_IRQ_routes[] =
 {
         0,   /* Line 0 - Unused */
         9,   /* Line 1 */
@@ -121,7 +121,7 @@ static char Omaha_pci_IRQ_routes[] __prepdata =
 };
 
 /* Motorola PowerStack */
-static char Blackhawk_pci_IRQ_map[19] __prepdata =
+static char Blackhawk_pci_IRQ_map[19] =
 {
   	0,	/* Slot 0  - unused */
   	0,	/* Slot 1  - unused */
@@ -144,7 +144,7 @@ static char Blackhawk_pci_IRQ_map[19] __prepdata =
  	3,	/* Slot P5 */
 };
 
-static char Blackhawk_pci_IRQ_routes[] __prepdata =
+static char Blackhawk_pci_IRQ_routes[] =
 {
    	0,	/* Line 0 - Unused */
    	9,	/* Line 1 */
@@ -154,7 +154,7 @@ static char Blackhawk_pci_IRQ_routes[] __prepdata =
 };
 
 /* Motorola Mesquite */
-static char Mesquite_pci_IRQ_map[23] __prepdata =
+static char Mesquite_pci_IRQ_map[23] =
 {
 	0,	/* Slot 0  - unused */
 	0,	/* Slot 1  - unused */
@@ -182,7 +182,7 @@ static char Mesquite_pci_IRQ_map[23] __prepdata =
 };
 
 /* Motorola Sitka */
-static char Sitka_pci_IRQ_map[21] __prepdata =
+static char Sitka_pci_IRQ_map[21] =
 {
 	0,      /* Slot 0  - unused */
 	0,      /* Slot 1  - unused */
@@ -208,7 +208,7 @@ static char Sitka_pci_IRQ_map[21] __prepdata =
 };
 
 /* Motorola MTX */
-static char MTX_pci_IRQ_map[23] __prepdata =
+static char MTX_pci_IRQ_map[23] =
 {
 	0,	/* Slot 0  - unused */
 	0,	/* Slot 1  - unused */
@@ -237,7 +237,7 @@ static char MTX_pci_IRQ_map[23] __prepdata =
 
 /* Motorola MTX Plus */
 /* Secondary bus interrupt routing is not supported yet */
-static char MTXplus_pci_IRQ_map[23] __prepdata =
+static char MTXplus_pci_IRQ_map[23] =
 {
         0,      /* Slot 0  - unused */
         0,      /* Slot 1  - unused */
@@ -264,13 +264,13 @@ static char MTXplus_pci_IRQ_map[23] __prepdata =
         0,      /* Slot 22 - unused */
 };
 
-static char Raven_pci_IRQ_routes[] __prepdata =
+static char Raven_pci_IRQ_routes[] =
 {
    	0,	/* This is a dummy structure */
 };
 
 /* Motorola MVME16xx */
-static char Genesis_pci_IRQ_map[16] __prepdata =
+static char Genesis_pci_IRQ_map[16] =
 {
   	0,	/* Slot 0  - unused */
   	0,	/* Slot 1  - unused */
@@ -290,7 +290,7 @@ static char Genesis_pci_IRQ_map[16] __prepdata =
   	0,	/* Slot 15 - unused */
 };
 
-static char Genesis_pci_IRQ_routes[] __prepdata =
+static char Genesis_pci_IRQ_routes[] =
 {
    	0,	/* Line 0 - Unused */
    	10,	/* Line 1 */
@@ -299,7 +299,7 @@ static char Genesis_pci_IRQ_routes[] __prepdata =
    	15	/* Line 4 */
 };
 
-static char Genesis2_pci_IRQ_map[23] __prepdata =
+static char Genesis2_pci_IRQ_map[23] =
 {
 	0,	/* Slot 0  - unused */
 	0,	/* Slot 1  - unused */
@@ -327,7 +327,7 @@ static char Genesis2_pci_IRQ_map[23] __prepdata =
 };
 
 /* Motorola Series-E */
-static char Comet_pci_IRQ_map[23] __prepdata =
+static char Comet_pci_IRQ_map[23] =
 {
   	0,	/* Slot 0  - unused */
   	0,	/* Slot 1  - unused */
@@ -354,7 +354,7 @@ static char Comet_pci_IRQ_map[23] __prepdata =
 	0,
 };
 
-static char Comet_pci_IRQ_routes[] __prepdata =
+static char Comet_pci_IRQ_routes[] =
 {
    	0,	/* Line 0 - Unused */
    	10,	/* Line 1 */
@@ -364,7 +364,7 @@ static char Comet_pci_IRQ_routes[] __prepdata =
 };
 
 /* Motorola Series-EX */
-static char Comet2_pci_IRQ_map[23] __prepdata =
+static char Comet2_pci_IRQ_map[23] =
 {
 	0,	/* Slot 0  - unused */
 	0,	/* Slot 1  - unused */
@@ -391,7 +391,7 @@ static char Comet2_pci_IRQ_map[23] __prepdata =
 	0,
 };
 
-static char Comet2_pci_IRQ_routes[] __prepdata =
+static char Comet2_pci_IRQ_routes[] =
 {
 	0,	/* Line 0 - Unused */
 	10,	/* Line 1 */
@@ -405,7 +405,7 @@ static char Comet2_pci_IRQ_routes[] __prepdata =
  * This is actually based on the Carolina motherboard
  * -- Cort
  */
-static char ibm8xx_pci_IRQ_map[23] __prepdata = {
+static char ibm8xx_pci_IRQ_map[23] = {
         0, /* Slot 0  - unused */
         0, /* Slot 1  - unused */
         0, /* Slot 2  - unused */
@@ -431,7 +431,7 @@ static char ibm8xx_pci_IRQ_map[23] __prepdata = {
         2, /* Slot 22 - PCI slot 1 PCIINTx# (See below) */
 };
 
-static char ibm8xx_pci_IRQ_routes[] __prepdata = {
+static char ibm8xx_pci_IRQ_routes[] = {
         0,      /* Line 0 - unused */
         15,     /* Line 1 */
         15,     /* Line 2 */
@@ -443,7 +443,7 @@ static char ibm8xx_pci_IRQ_routes[] __prepdata = {
  * a 6015 ibm board
  * -- Cort
  */
-static char ibm6015_pci_IRQ_map[23] __prepdata = {
+static char ibm6015_pci_IRQ_map[23] = {
         0, /* Slot 0  - unused */
         0, /* Slot 1  - unused */
         0, /* Slot 2  - unused */
@@ -469,7 +469,7 @@ static char ibm6015_pci_IRQ_map[23] __prepdata = {
         2, /* Slot 22 -  */
 };
 
-static char ibm6015_pci_IRQ_routes[] __prepdata = {
+static char ibm6015_pci_IRQ_routes[] = {
         0,      /* Line 0 - unused */
         13,     /* Line 1 */
         15,     /* Line 2 */
@@ -479,7 +479,7 @@ static char ibm6015_pci_IRQ_routes[] __prepdata = {
 
 
 /* IBM Nobis and Thinkpad 850 */
-static char Nobis_pci_IRQ_map[23] __prepdata ={
+static char Nobis_pci_IRQ_map[23] ={
         0, /* Slot 0  - unused */
         0, /* Slot 1  - unused */
         0, /* Slot 2  - unused */
@@ -498,7 +498,7 @@ static char Nobis_pci_IRQ_map[23] __prepdata ={
         0, /* Slot 15 - unused */
 };
 
-static char Nobis_pci_IRQ_routes[] __prepdata = {
+static char Nobis_pci_IRQ_routes[] = {
         0, /* Line 0 - Unused */
         13, /* Line 1 */
         13, /* Line 2 */
@@ -510,7 +510,7 @@ static char Nobis_pci_IRQ_routes[] __prepdata = {
  * IBM RS/6000 43p/140  -- paulus
  * XXX we should get all this from the residual data
  */
-static char ibm43p_pci_IRQ_map[23] __prepdata = {
+static char ibm43p_pci_IRQ_map[23] = {
         0, /* Slot 0  - unused */
         0, /* Slot 1  - unused */
         0, /* Slot 2  - unused */
@@ -536,7 +536,7 @@ static char ibm43p_pci_IRQ_map[23] __prepdata = {
         1, /* Slot 22 - PCI slot 1 PCIINTx# (See below) */
 };
 
-static char ibm43p_pci_IRQ_routes[] __prepdata = {
+static char ibm43p_pci_IRQ_routes[] = {
         0,      /* Line 0 - unused */
         15,     /* Line 1 */
         15,     /* Line 2 */
@@ -559,7 +559,7 @@ struct powerplus_irq_list
  * are routed to OpenPIC inputs 5-8.  These values are offset by
  * 16 in the table to reflect the Linux kernel interrupt value.
  */
-struct powerplus_irq_list Powerplus_pci_IRQ_list __prepdata =
+struct powerplus_irq_list Powerplus_pci_IRQ_list =
 {
 	{25, 26, 27, 28},
 	{21, 22, 23, 24}
@@ -572,7 +572,7 @@ struct powerplus_irq_list Powerplus_pci_IRQ_list __prepdata =
  * are routed to OpenPIC inputs 12-15. These values are offset by
  * 16 in the table to reflect the Linux kernel interrupt value.
  */
-struct powerplus_irq_list Mesquite_pci_IRQ_list __prepdata =
+struct powerplus_irq_list Mesquite_pci_IRQ_list =
 {
 	{24, 25, 26, 27},
 	{28, 29, 30, 31}
@@ -582,7 +582,7 @@ struct powerplus_irq_list Mesquite_pci_IRQ_list __prepdata =
  * This table represents the standard PCI swizzle defined in the
  * PCI bus specification.
  */
-static unsigned char prep_pci_intpins[4][4] __prepdata =
+static unsigned char prep_pci_intpins[4][4] =
 {
 	{ 1, 2, 3, 4},  /* Buses 0, 4, 8, ... */
 	{ 2, 3, 4, 1},  /* Buses 1, 5, 9, ... */
@@ -622,7 +622,7 @@ static unsigned char prep_pci_intpins[4][4] __prepdata =
 #define MIN_DEVNR	11
 #define MAX_DEVNR	22
 
-static int __prep
+static int
 prep_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
 		 int len, u32 *val)
 {
@@ -652,7 +652,7 @@ prep_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
 	return PCIBIOS_SUCCESSFUL;
 }
 
-static int __prep
+static int
 prep_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
 		  int len, u32 val)
 {
@@ -804,7 +804,7 @@ struct mot_info {
 	void            (*map_non0_bus)(struct pci_dev *);      /* For boards with more than bus 0 devices. */
 	struct powerplus_irq_list *pci_irq_list; /* List of PCI MPIC inputs */
 	unsigned char   secondary_bridge_devfn; /* devfn of secondary bus transparent bridge */
-} mot_info[] __prepdata = {
+} mot_info[] = {
 	{0x300, 0x00, 0x00, "MVME 2400",			Genesis2_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF},
 	{0x010, 0x00, 0x00, "Genesis",				Genesis_pci_IRQ_map,	Genesis_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0x00},
 	{0x020, 0x00, 0x00, "Powerstack (Series E)",		Comet_pci_IRQ_map,	Comet_pci_IRQ_routes, NULL, NULL, 0x00},
diff --git a/arch/ppc/platforms/prep_setup.c b/arch/ppc/platforms/prep_setup.c
index bc926be95472..4415748071dc 100644
--- a/arch/ppc/platforms/prep_setup.c
+++ b/arch/ppc/platforms/prep_setup.c
@@ -61,6 +61,15 @@
 #include <asm/pci-bridge.h>
 #include <asm/todc.h>
 
+/* prep registers for L2 */
+#define CACHECRBA       0x80000823      /* Cache configuration register address */
+#define L2CACHE_MASK	0x03	/* Mask for 2 L2 Cache bits */
+#define L2CACHE_512KB	0x00	/* 512KB */
+#define L2CACHE_256KB	0x01	/* 256KB */
+#define L2CACHE_1MB	0x02	/* 1MB */
+#define L2CACHE_NONE	0x03	/* NONE */
+#define L2CACHE_PARITY  0x08    /* Mask for L2 Cache Parity Protected bit */
+
 TODC_ALLOC();
 
 unsigned char ucSystemType;
@@ -89,9 +98,6 @@ extern void prep_tiger1_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi
 #define cached_21	(((char *)(ppc_cached_irq_mask))[3])
 #define cached_A1	(((char *)(ppc_cached_irq_mask))[2])
 
-/* for the mac fs */
-dev_t boot_dev;
-
 #ifdef CONFIG_SOUND_CS4232
 long ppc_cs4232_dma, ppc_cs4232_dma2;
 #endif
@@ -173,7 +179,7 @@ prep_carolina_enable_l2(void)
 }
 
 /* cpuinfo code common to all IBM PReP */
-static void __prep
+static void
 prep_ibm_cpuinfo(struct seq_file *m)
 {
 	unsigned int equip_reg = inb(PREP_IBM_EQUIPMENT);
@@ -209,14 +215,14 @@ prep_ibm_cpuinfo(struct seq_file *m)
 	}
 }
 
-static int __prep
+static int
 prep_gen_cpuinfo(struct seq_file *m)
 {
 	prep_ibm_cpuinfo(m);
 	return 0;
 }
 
-static int __prep
+static int
 prep_sandalfoot_cpuinfo(struct seq_file *m)
 {
 	unsigned int equip_reg = inb(PREP_IBM_EQUIPMENT);
@@ -243,7 +249,7 @@ prep_sandalfoot_cpuinfo(struct seq_file *m)
 	return 0;
 }
 
-static int __prep
+static int
 prep_thinkpad_cpuinfo(struct seq_file *m)
 {
 	unsigned int equip_reg = inb(PREP_IBM_EQUIPMENT);
@@ -314,7 +320,7 @@ prep_thinkpad_cpuinfo(struct seq_file *m)
 	return 0;
 }
 
-static int __prep
+static int
 prep_carolina_cpuinfo(struct seq_file *m)
 {
 	unsigned int equip_reg = inb(PREP_IBM_EQUIPMENT);
@@ -350,7 +356,7 @@ prep_carolina_cpuinfo(struct seq_file *m)
 	return 0;
 }
 
-static int __prep
+static int
 prep_tiger1_cpuinfo(struct seq_file *m)
 {
 	unsigned int l2_reg = inb(PREP_IBM_L2INFO);
@@ -393,7 +399,7 @@ prep_tiger1_cpuinfo(struct seq_file *m)
 
 
 /* Used by all Motorola PReP */
-static int __prep
+static int
 prep_mot_cpuinfo(struct seq_file *m)
 {
 	unsigned int cachew = *((unsigned char *)CACHECRBA);
@@ -454,7 +460,7 @@ no_l2:
 	return 0;
 }
 
-static void __prep
+static void
 prep_restart(char *cmd)
 {
 #define PREP_SP92	0x92	/* Special Port 92 */
@@ -473,7 +479,7 @@ prep_restart(char *cmd)
 #undef PREP_SP92
 }
 
-static void __prep
+static void
 prep_halt(void)
 {
 	local_irq_disable(); /* no interrupts */
@@ -488,7 +494,7 @@ prep_halt(void)
 /* Carrera is the power manager in the Thinkpads. Unfortunately not much is
  * known about it, so we can't power down.
  */
-static void __prep
+static void
 prep_carrera_poweroff(void)
 {
 	prep_halt();
@@ -501,7 +507,7 @@ prep_carrera_poweroff(void)
  * somewhat in the IBM Carolina Technical Specification.
  * -Hollis
  */
-static void __prep
+static void
 utah_sig87c750_setbit(unsigned int bytenum, unsigned int bitnum, int value)
 {
 	/*
@@ -539,7 +545,7 @@ utah_sig87c750_setbit(unsigned int bytenum, unsigned int bitnum, int value)
 	udelay(100);				/* important: let controller recover */
 }
 
-static void __prep
+static void
 prep_sig750_poweroff(void)
 {
 	/* tweak the power manager found in most IBM PRePs (except Thinkpads) */
@@ -554,7 +560,7 @@ prep_sig750_poweroff(void)
 	/* not reached */
 }
 
-static int __prep
+static int
 prep_show_percpuinfo(struct seq_file *m, int i)
 {
 	/* PREP's without residual data will give incorrect values here */
@@ -700,12 +706,12 @@ prep_set_bat(void)
 /*
  * IBM 3-digit status LED
  */
-static unsigned int ibm_statusled_base __prepdata;
+static unsigned int ibm_statusled_base;
 
-static void __prep
+static void
 ibm_statusled_progress(char *s, unsigned short hex);
 
-static int __prep
+static int
 ibm_statusled_panic(struct notifier_block *dummy1, unsigned long dummy2,
 		    void * dummy3)
 {
@@ -713,13 +719,13 @@ ibm_statusled_panic(struct notifier_block *dummy1, unsigned long dummy2,
 	return NOTIFY_DONE;
 }
 
-static struct notifier_block ibm_statusled_block __prepdata = {
+static struct notifier_block ibm_statusled_block = {
 	ibm_statusled_panic,
 	NULL,
 	INT_MAX /* try to do it first */
 };
 
-static void __prep
+static void
 ibm_statusled_progress(char *s, unsigned short hex)
 {
 	static int notifier_installed;
@@ -945,19 +951,6 @@ prep_calibrate_decr(void)
 		todc_calibrate_decr();
 }
 
-static unsigned int __prep
-prep_irq_canonicalize(u_int irq)
-{
-	if (irq == 2)
-	{
-		return 9;
-	}
-	else
-	{
-		return irq;
-	}
-}
-
 static void __init
 prep_init_IRQ(void)
 {
@@ -970,11 +963,9 @@ prep_init_IRQ(void)
 		openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
 				       i8259_irq);
 	}
-	for ( i = 0 ; i < NUM_8259_INTERRUPTS ; i++ )
-		irq_desc[i].handler = &i8259_pic;
 
 	if (have_residual_data) {
-		i8259_init(residual_isapic_addr());
+		i8259_init(residual_isapic_addr(), 0);
 		return;
 	}
 
@@ -985,18 +976,18 @@ prep_init_IRQ(void)
 	if (((pci_viddid & 0xffff) == PCI_VENDOR_ID_MOTOROLA)
 			&& ((pci_did == PCI_DEVICE_ID_MOTOROLA_RAVEN)
 				|| (pci_did == PCI_DEVICE_ID_MOTOROLA_HAWK)))
-		i8259_init(0);
+		i8259_init(0, 0);
 	else
 		/* PCI interrupt ack address given in section 6.1.8 of the
 		 * PReP specification. */
-		i8259_init(MPC10X_MAPA_PCI_INTACK_ADDR);
+		i8259_init(MPC10X_MAPA_PCI_INTACK_ADDR, 0);
 }
 
 #if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
 /*
  * IDE stuff.
  */
-static int __prep
+static int
 prep_ide_default_irq(unsigned long base)
 {
 	switch (base) {
@@ -1010,7 +1001,7 @@ prep_ide_default_irq(unsigned long base)
 	}
 }
 
-static unsigned long __prep
+static unsigned long
 prep_ide_default_io_base(int index)
 {
 	switch (index) {
@@ -1055,7 +1046,7 @@ smp_prep_setup_cpu(int cpu_nr)
 		do_openpic_setup_cpu();
 }
 
-static struct smp_ops_t prep_smp_ops __prepdata = {
+static struct smp_ops_t prep_smp_ops = {
 	smp_openpic_message_pass,
 	smp_prep_probe,
 	smp_prep_kick_cpu,
@@ -1113,6 +1104,7 @@ prep_init(unsigned long r3, unsigned long r4, unsigned long r5,
 	ISA_DMA_THRESHOLD = 0x00ffffff;
 	DMA_MODE_READ = 0x44;
 	DMA_MODE_WRITE = 0x48;
+	ppc_do_canonicalize_irqs = 1;
 
 	/* figure out what kind of prep workstation we are */
 	if (have_residual_data) {
@@ -1139,7 +1131,6 @@ prep_init(unsigned long r3, unsigned long r4, unsigned long r5,
 	ppc_md.setup_arch     = prep_setup_arch;
 	ppc_md.show_percpuinfo = prep_show_percpuinfo;
 	ppc_md.show_cpuinfo   = NULL; /* set in prep_setup_arch() */
-	ppc_md.irq_canonicalize = prep_irq_canonicalize;
 	ppc_md.init_IRQ       = prep_init_IRQ;
 	/* this gets changed later on if we have an OpenPIC -- Cort */
 	ppc_md.get_irq        = i8259_irq;
@@ -1176,6 +1167,6 @@ prep_init(unsigned long r3, unsigned long r4, unsigned long r5,
 #endif
 
 #ifdef CONFIG_SMP
-	ppc_md.smp_ops		 = &prep_smp_ops;
+	smp_ops			 = &prep_smp_ops;
 #endif /* CONFIG_SMP */
 }
diff --git a/arch/ppc/platforms/prpmc750.c b/arch/ppc/platforms/prpmc750.c
index 24ae1caafc61..0bb14a5e824c 100644
--- a/arch/ppc/platforms/prpmc750.c
+++ b/arch/ppc/platforms/prpmc750.c
@@ -24,7 +24,6 @@
 #include <linux/initrd.h>
 #include <linux/console.h>
 #include <linux/delay.h>
-#include <linux/irq.h>
 #include <linux/seq_file.h>
 #include <linux/ide.h>
 #include <linux/root_dev.h>
diff --git a/arch/ppc/platforms/prpmc800.c b/arch/ppc/platforms/prpmc800.c
index 8b09fa69b35b..de7baefacd3a 100644
--- a/arch/ppc/platforms/prpmc800.c
+++ b/arch/ppc/platforms/prpmc800.c
@@ -22,7 +22,6 @@
 #include <linux/initrd.h>
 #include <linux/console.h>
 #include <linux/delay.h>
-#include <linux/irq.h>
 #include <linux/seq_file.h>
 #include <linux/ide.h>
 #include <linux/root_dev.h>
diff --git a/arch/ppc/platforms/radstone_ppc7d.c b/arch/ppc/platforms/radstone_ppc7d.c
index c30607a972d8..708b8739ecdd 100644
--- a/arch/ppc/platforms/radstone_ppc7d.c
+++ b/arch/ppc/platforms/radstone_ppc7d.c
@@ -32,7 +32,6 @@
 #include <linux/initrd.h>
 #include <linux/console.h>
 #include <linux/delay.h>
-#include <linux/irq.h>
 #include <linux/ide.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
@@ -41,6 +40,7 @@
 #include <linux/serial_core.h>
 #include <linux/mv643xx.h>
 #include <linux/netdevice.h>
+#include <linux/platform_device.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>
@@ -59,7 +59,6 @@
 #include <asm/mpc10x.h>
 #include <asm/pci-bridge.h>
 #include <asm/mv64x60.h>
-#include <asm/i8259.h>
 
 #include "radstone_ppc7d.h"
 
@@ -516,13 +515,9 @@ static void __init ppc7d_init_irq(void)
 	int irq;
 
 	pr_debug("%s\n", __FUNCTION__);
-	i8259_init(0);
+	i8259_init(0, 0);
 	mv64360_init_irq();
 
-	/* IRQ 0..15 are handled by the cascaded 8259's of the Ali1535 */
-	for (irq = 0; irq < 16; irq++) {
-		irq_desc[irq].handler = &i8259_pic;
-	}
 	/* IRQs 5,6,9,10,11,14,15 are level sensitive */
 	irq_desc[5].status |= IRQ_LEVEL;
 	irq_desc[6].status |= IRQ_LEVEL;
@@ -1185,18 +1180,18 @@ static void __init ppc7d_setup_arch(void)
 		ROOT_DEV = Root_HDA1;
 #endif
 
-	if ((cur_cpu_spec[0]->cpu_features & CPU_FTR_SPEC7450) ||
-	    (cur_cpu_spec[0]->cpu_features & CPU_FTR_L3CR))
+	if ((cur_cpu_spec->cpu_features & CPU_FTR_SPEC7450) ||
+	    (cur_cpu_spec->cpu_features & CPU_FTR_L3CR))
 		/* 745x is different.  We only want to pass along enable. */
 		_set_L2CR(L2CR_L2E);
-	else if (cur_cpu_spec[0]->cpu_features & CPU_FTR_L2CR)
+	else if (cur_cpu_spec->cpu_features & CPU_FTR_L2CR)
 		/* All modules have 1MB of L2.  We also assume that an
 		 * L2 divisor of 3 will work.
 		 */
 		_set_L2CR(L2CR_L2E | L2CR_L2SIZ_1MB | L2CR_L2CLK_DIV3
 			  | L2CR_L2RAM_PIPE | L2CR_L2OH_1_0 | L2CR_L2DF);
 
-	if (cur_cpu_spec[0]->cpu_features & CPU_FTR_L3CR)
+	if (cur_cpu_spec->cpu_features & CPU_FTR_L3CR)
 		/* No L3 cache */
 		_set_L3CR(0);
 
@@ -1426,6 +1421,7 @@ void __init platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 	ppc_md.setup_arch = ppc7d_setup_arch;
 	ppc_md.init = ppc7d_init2;
 	ppc_md.show_cpuinfo = ppc7d_show_cpuinfo;
+	/* XXX this is broken... */
 	ppc_md.irq_canonicalize = ppc7d_irq_canonicalize;
 	ppc_md.init_IRQ = ppc7d_init_irq;
 	ppc_md.get_irq = ppc7d_get_irq;
diff --git a/arch/ppc/platforms/residual.c b/arch/ppc/platforms/residual.c
index 0f84ca603612..c9911601cfdf 100644
--- a/arch/ppc/platforms/residual.c
+++ b/arch/ppc/platforms/residual.c
@@ -47,7 +47,7 @@
 #include <asm/ide.h>
 
 
-unsigned char __res[sizeof(RESIDUAL)] __prepdata = {0,};
+unsigned char __res[sizeof(RESIDUAL)] = {0,};
 RESIDUAL *res = (RESIDUAL *)&__res;
 
 char * PnP_BASE_TYPES[] __initdata = {
diff --git a/arch/ppc/platforms/sandpoint.c b/arch/ppc/platforms/sandpoint.c
index 21e31346b12b..9eeed3572309 100644
--- a/arch/ppc/platforms/sandpoint.c
+++ b/arch/ppc/platforms/sandpoint.c
@@ -74,7 +74,6 @@
 #include <linux/initrd.h>
 #include <linux/console.h>
 #include <linux/delay.h>
-#include <linux/irq.h>
 #include <linux/ide.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
@@ -495,27 +494,10 @@ sandpoint_init_IRQ(void)
 			i8259_irq);
 
 	/*
-	 * openpic_init() has set up irq_desc[16-31] to be openpic
-	 * interrupts.  We need to set irq_desc[0-15] to be i8259
-	 * interrupts.
-	 */
-	for(i=0; i < NUM_8259_INTERRUPTS; i++)
-		irq_desc[i].handler = &i8259_pic;
-
-	/*
 	 * The EPIC allows for a read in the range of 0xFEF00000 ->
 	 * 0xFEFFFFFF to generate a PCI interrupt-acknowledge transaction.
 	 */
-	i8259_init(0xfef00000);
-}
-
-static u32
-sandpoint_irq_canonicalize(u32 irq)
-{
-	if (irq == 2)
-		return 9;
-	else
-		return irq;
+	i8259_init(0xfef00000, 0);
 }
 
 static unsigned long __init
@@ -728,10 +710,10 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 	ISA_DMA_THRESHOLD = 0x00ffffff;
 	DMA_MODE_READ = 0x44;
 	DMA_MODE_WRITE = 0x48;
+	ppc_do_canonicalize_irqs = 1;
 
 	ppc_md.setup_arch = sandpoint_setup_arch;
 	ppc_md.show_cpuinfo = sandpoint_show_cpuinfo;
-	ppc_md.irq_canonicalize = sandpoint_irq_canonicalize;
 	ppc_md.init_IRQ = sandpoint_init_IRQ;
 	ppc_md.get_irq = openpic_get_irq;
 
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
index b8d08f33f7ee..5b7f2b80e56e 100644
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_440EP)		+= ibm440gx_common.o
 obj-$(CONFIG_440GP)		+= ibm440gp_common.o
 obj-$(CONFIG_440GX)		+= ibm440gx_common.o
 obj-$(CONFIG_440SP)		+= ibm440gx_common.o ibm440sp_common.o
+obj-$(CONFIG_440SPE)		+= ibm440gx_common.o ibm440sp_common.o ppc440spe_pcie.o
 ifeq ($(CONFIG_4xx),y)
 ifeq ($(CONFIG_VIRTEX_II_PRO),y)
 obj-$(CONFIG_40x)		+= xilinx_pic.o
@@ -31,52 +32,51 @@ obj-$(CONFIG_GEN_RTC)		+= todc_time.o
 obj-$(CONFIG_PPC4xx_DMA)	+= ppc4xx_dma.o
 obj-$(CONFIG_PPC4xx_EDMA)	+= ppc4xx_sgdma.o
 ifeq ($(CONFIG_40x),y)
-obj-$(CONFIG_PCI)		+= indirect_pci.o pci_auto.o ppc405_pci.o
+obj-$(CONFIG_PCI)		+= pci_auto.o ppc405_pci.o
 endif
 endif
 obj-$(CONFIG_8xx)		+= m8xx_setup.o ppc8xx_pic.o $(wdt-mpc8xx-y) \
 				   ppc_sys.o mpc8xx_devices.o mpc8xx_sys.o
-ifeq ($(CONFIG_8xx),y)
-obj-$(CONFIG_PCI)		+= qspan_pci.o i8259.o
-endif
-obj-$(CONFIG_PPC_OF)		+= prom_init.o prom.o of_device.o
-obj-$(CONFIG_PPC_PMAC)		+= open_pic.o indirect_pci.o
+obj-$(CONFIG_PCI_QSPAN)		+= qspan_pci.o
+obj-$(CONFIG_PPC_OF)		+= prom_init.o prom.o
+obj-$(CONFIG_PPC_PMAC)		+= open_pic.o
 obj-$(CONFIG_POWER4)		+= open_pic2.o
-obj-$(CONFIG_PPC_CHRP)		+= open_pic.o indirect_pci.o i8259.o
-obj-$(CONFIG_PPC_PREP)		+= open_pic.o indirect_pci.o i8259.o todc_time.o
-obj-$(CONFIG_BAMBOO)		+= indirect_pci.o pci_auto.o todc_time.o
+obj-$(CONFIG_PPC_CHRP)		+= open_pic.o
+obj-$(CONFIG_PPC_PREP)		+= open_pic.o todc_time.o
+obj-$(CONFIG_BAMBOO)		+= pci_auto.o todc_time.o
 obj-$(CONFIG_CPCI690)		+= todc_time.o pci_auto.o
-obj-$(CONFIG_EBONY)		+= indirect_pci.o pci_auto.o todc_time.o
+obj-$(CONFIG_EBONY)		+= pci_auto.o todc_time.o
 obj-$(CONFIG_EV64260)		+= todc_time.o pci_auto.o
+obj-$(CONFIG_EV64360)		+= todc_time.o
 obj-$(CONFIG_CHESTNUT)		+= mv64360_pic.o pci_auto.o
-obj-$(CONFIG_GEMINI)		+= open_pic.o indirect_pci.o
+obj-$(CONFIG_GEMINI)		+= open_pic.o
 obj-$(CONFIG_GT64260)		+= gt64260_pic.o
-obj-$(CONFIG_LOPEC)		+= i8259.o pci_auto.o todc_time.o
+obj-$(CONFIG_LOPEC)		+= pci_auto.o todc_time.o
 obj-$(CONFIG_HDPU)		+= pci_auto.o
-obj-$(CONFIG_LUAN)		+= indirect_pci.o pci_auto.o todc_time.o
+obj-$(CONFIG_LUAN)		+= pci_auto.o todc_time.o
+obj-$(CONFIG_YUCCA)		+= pci_auto.o todc_time.o
 obj-$(CONFIG_KATANA)		+= pci_auto.o
 obj-$(CONFIG_MV64360)		+= mv64360_pic.o
-obj-$(CONFIG_MV64X60)		+= mv64x60.o mv64x60_win.o indirect_pci.o
-obj-$(CONFIG_MVME5100)		+= open_pic.o todc_time.o indirect_pci.o \
+obj-$(CONFIG_MV64X60)		+= mv64x60.o mv64x60_win.o
+obj-$(CONFIG_MVME5100)		+= open_pic.o todc_time.o \
 					pci_auto.o hawk_common.o
-obj-$(CONFIG_MVME5100_IPMC761_PRESENT)	+= i8259.o
-obj-$(CONFIG_OCOTEA)		+= indirect_pci.o pci_auto.o todc_time.o
+obj-$(CONFIG_OCOTEA)		+= pci_auto.o todc_time.o
 obj-$(CONFIG_PAL4)		+= cpc700_pic.o
 obj-$(CONFIG_POWERPMC250)	+= pci_auto.o
-obj-$(CONFIG_PPLUS)		+= hawk_common.o open_pic.o i8259.o \
-				   indirect_pci.o todc_time.o pci_auto.o
-obj-$(CONFIG_PRPMC750)		+= open_pic.o indirect_pci.o pci_auto.o \
+obj-$(CONFIG_PPLUS)		+= hawk_common.o open_pic.o \
+				   todc_time.o pci_auto.o
+obj-$(CONFIG_PRPMC750)		+= open_pic.o pci_auto.o \
 					hawk_common.o
 obj-$(CONFIG_HARRIER)		+= harrier.o
-obj-$(CONFIG_PRPMC800)		+= open_pic.o indirect_pci.o pci_auto.o
-obj-$(CONFIG_RADSTONE_PPC7D)	+= i8259.o pci_auto.o
-obj-$(CONFIG_SANDPOINT)		+= i8259.o pci_auto.o todc_time.o
+obj-$(CONFIG_PRPMC800)		+= open_pic.o pci_auto.o
+obj-$(CONFIG_RADSTONE_PPC7D)	+= pci_auto.o
+obj-$(CONFIG_SANDPOINT)		+= pci_auto.o todc_time.o
 obj-$(CONFIG_SBC82xx)		+= todc_time.o
-obj-$(CONFIG_SPRUCE)		+= cpc700_pic.o indirect_pci.o pci_auto.o \
+obj-$(CONFIG_SPRUCE)		+= cpc700_pic.o pci_auto.o \
 				   todc_time.o
 obj-$(CONFIG_8260)		+= m8260_setup.o pq2_devices.o pq2_sys.o \
 				   ppc_sys.o
-obj-$(CONFIG_PCI_8260)		+= m82xx_pci.o indirect_pci.o pci_auto.o
+obj-$(CONFIG_PCI_8260)		+= m82xx_pci.o pci_auto.o
 obj-$(CONFIG_8260_PCI9)		+= m8260_pci_erratum9.o
 obj-$(CONFIG_CPM2)		+= cpm2_common.o cpm2_pic.o
 ifeq ($(CONFIG_PPC_GEN550),y)
@@ -87,20 +87,19 @@ ifeq ($(CONFIG_SERIAL_MPSC_CONSOLE),y)
 obj-$(CONFIG_SERIAL_TEXT_DEBUG)	+= mv64x60_dbg.o
 endif
 obj-$(CONFIG_BOOTX_TEXT)	+= btext.o
-obj-$(CONFIG_MPC10X_BRIDGE)	+= mpc10x_common.o indirect_pci.o ppc_sys.o
+obj-$(CONFIG_MPC10X_BRIDGE)	+= mpc10x_common.o ppc_sys.o
 obj-$(CONFIG_MPC10X_OPENPIC)	+= open_pic.o
-obj-$(CONFIG_40x)		+= dcr.o
-obj-$(CONFIG_BOOKE)		+= dcr.o
 obj-$(CONFIG_85xx)		+= open_pic.o ppc85xx_common.o ppc85xx_setup.o \
-					ppc_sys.o i8259.o mpc85xx_sys.o \
+					ppc_sys.o mpc85xx_sys.o \
 					mpc85xx_devices.o
 ifeq ($(CONFIG_85xx),y)
-obj-$(CONFIG_PCI)		+= indirect_pci.o pci_auto.o
+obj-$(CONFIG_PCI)		+= pci_auto.o
 endif
+obj-$(CONFIG_RAPIDIO)		+= ppc85xx_rio.o
 obj-$(CONFIG_83xx)		+= ipic.o ppc83xx_setup.o ppc_sys.o \
 					mpc83xx_sys.o mpc83xx_devices.o
 ifeq ($(CONFIG_83xx),y)
-obj-$(CONFIG_PCI)		+= indirect_pci.o pci_auto.o
+obj-$(CONFIG_PCI)		+= pci_auto.o
 endif
 obj-$(CONFIG_MPC8548_CDS)	+= todc_time.o
 obj-$(CONFIG_MPC8555_CDS)	+= todc_time.o
diff --git a/arch/ppc/syslib/btext.c b/arch/ppc/syslib/btext.c
index 7734f6836174..12fa83e6774a 100644
--- a/arch/ppc/syslib/btext.c
+++ b/arch/ppc/syslib/btext.c
@@ -53,8 +53,8 @@ extern char *klimit;
  * chrp only uses it during early boot.
  */
 #ifdef CONFIG_XMON
-#define BTEXT	__pmac
-#define BTDATA	__pmacdata
+#define BTEXT
+#define BTDATA
 #else
 #define BTEXT	__init
 #define BTDATA	__initdata
@@ -187,7 +187,7 @@ btext_setup_display(int width, int height, int depth, int pitch,
  *    changes.
  */
 
-void __openfirmware
+void
 map_boot_text(void)
 {
 	unsigned long base, offset, size;
diff --git a/arch/ppc/syslib/cpm2_pic.c b/arch/ppc/syslib/cpm2_pic.c
index c867be6981cb..29d95d415ceb 100644
--- a/arch/ppc/syslib/cpm2_pic.c
+++ b/arch/ppc/syslib/cpm2_pic.c
@@ -37,7 +37,7 @@ static	u_char	irq_to_siureg[] = {
 static	u_char	irq_to_siubit[] = {
 	 0, 15, 14, 13, 12, 11, 10,  9,
 	 8,  7,  6,  5,  4,  3,  2,  1,
-	 2,  1, 15, 14, 13, 12, 11, 10,
+	 2,  1,  0, 14, 13, 12, 11, 10,
 	 9,  8,  7,  6,  5,  4,  3,  0,
 	31, 30, 29, 28, 27, 26, 25, 24,
 	23, 22, 21, 20, 19, 18, 17, 16,
diff --git a/arch/ppc/syslib/gt64260_pic.c b/arch/ppc/syslib/gt64260_pic.c
index 44aa87385451..f97b3a9abd1e 100644
--- a/arch/ppc/syslib/gt64260_pic.c
+++ b/arch/ppc/syslib/gt64260_pic.c
@@ -45,6 +45,7 @@
 #include <asm/system.h>
 #include <asm/irq.h>
 #include <asm/mv64x60.h>
+#include <asm/machdep.h>
 
 #define CPU_INTR_STR	"gt64260 cpu interface error"
 #define PCI0_INTR_STR	"gt64260 pci 0 error"
diff --git a/arch/ppc/syslib/ibm440gx_common.c b/arch/ppc/syslib/ibm440gx_common.c
index 0bb919859b8b..c36db279b43d 100644
--- a/arch/ppc/syslib/ibm440gx_common.c
+++ b/arch/ppc/syslib/ibm440gx_common.c
@@ -236,9 +236,9 @@ void __init ibm440gx_l2c_setup(struct ibm44x_clocks* p)
 	/* Disable L2C on rev.A, rev.B and 800MHz version of rev.C,
 	   enable it on all other revisions
 	 */
-	if (strcmp(cur_cpu_spec[0]->cpu_name, "440GX Rev. A") == 0 ||
-			strcmp(cur_cpu_spec[0]->cpu_name, "440GX Rev. B") == 0
-			|| (strcmp(cur_cpu_spec[0]->cpu_name, "440GX Rev. C")
+	if (strcmp(cur_cpu_spec->cpu_name, "440GX Rev. A") == 0 ||
+			strcmp(cur_cpu_spec->cpu_name, "440GX Rev. B") == 0
+			|| (strcmp(cur_cpu_spec->cpu_name, "440GX Rev. C")
 				== 0 && p->cpu > 667000000))
 		ibm440gx_l2c_disable();
 	else
diff --git a/arch/ppc/syslib/ibm440sp_common.c b/arch/ppc/syslib/ibm440sp_common.c
index 417d4cff77a0..cdafda127d81 100644
--- a/arch/ppc/syslib/ibm440sp_common.c
+++ b/arch/ppc/syslib/ibm440sp_common.c
@@ -1,7 +1,7 @@
 /*
  * arch/ppc/syslib/ibm440sp_common.c
  *
- * PPC440SP system library
+ * PPC440SP/PPC440SPe system library
  *
  * Matt Porter <mporter@kernel.crashing.org>
  * Copyright 2002-2005 MontaVista Software Inc.
@@ -35,7 +35,7 @@ unsigned long __init ibm440sp_find_end_of_memory(void)
 	u32 mem_size = 0;
 
 	/* Read two bank sizes and sum */
-	for (i=0; i<2; i++)
+	for (i=0; i< MQ0_NUM_BANKS; i++)
 		switch (mfdcr(DCRN_MQ0_BS0BAS + i) & MQ0_CONFIG_SIZE_MASK) {
 			case MQ0_CONFIG_SIZE_8M:
 				mem_size += PPC44x_MEM_SIZE_8M;
diff --git a/arch/ppc/syslib/ibm44x_common.c b/arch/ppc/syslib/ibm44x_common.c
index 7612e0623f99..71db11d22158 100644
--- a/arch/ppc/syslib/ibm44x_common.c
+++ b/arch/ppc/syslib/ibm44x_common.c
@@ -20,6 +20,7 @@
 #include <linux/types.h>
 #include <linux/serial.h>
 #include <linux/module.h>
+#include <linux/initrd.h>
 
 #include <asm/ibm44x.h>
 #include <asm/mmu.h>
@@ -27,9 +28,14 @@
 #include <asm/time.h>
 #include <asm/ppc4xx_pic.h>
 #include <asm/param.h>
+#include <asm/bootinfo.h>
+#include <asm/ppcboot.h>
 
 #include <syslib/gen550.h>
 
+/* Global Variables */
+bd_t __res;
+
 phys_addr_t fixup_bigphys_addr(phys_addr_t addr, phys_addr_t size)
 {
 	phys_addr_t page_4gb = 0;
@@ -150,8 +156,36 @@ static unsigned long __init ibm44x_find_end_of_memory(void)
 	return mem_size;
 }
 
-void __init ibm44x_platform_init(void)
+void __init ibm44x_platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+				 unsigned long r6, unsigned long r7)
 {
+	parse_bootinfo(find_bootinfo());
+
+	/*
+	 * If we were passed in a board information, copy it into the
+	 * residual data area.
+	 */
+	if (r3)
+		__res = *(bd_t *)(r3 + KERNELBASE);
+
+#if defined(CONFIG_BLK_DEV_INITRD)
+	/*
+	 * If the init RAM disk has been configured in, and there's a valid
+	 * starting address for it, set it up.
+	 */
+	if (r4) {
+		initrd_start = r4 + KERNELBASE;
+		initrd_end = r5 + KERNELBASE;
+	}
+#endif  /* CONFIG_BLK_DEV_INITRD */
+
+	/* Copy the kernel command line arguments to a safe place. */
+
+	if (r6) {
+		*(char *) (r7 + KERNELBASE) = 0;
+		strcpy(cmd_line, (char *) (r6 + KERNELBASE));
+	}
+
 	ppc_md.init_IRQ = ppc4xx_pic_init;
 	ppc_md.find_end_of_memory = ibm44x_find_end_of_memory;
 	ppc_md.restart = ibm44x_restart;
@@ -178,12 +212,23 @@ void __init ibm44x_platform_init(void)
 #endif
 }
 
-/* Called from MachineCheckException */
+/* Called from machine_check_exception */
 void platform_machine_check(struct pt_regs *regs)
 {
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+	printk("PLB0: BEAR=0x%08x%08x ACR=  0x%08x BESR= 0x%08x%08x\n",
+	       mfdcr(DCRN_PLB0_BEARH), mfdcr(DCRN_PLB0_BEARL),
+	       mfdcr(DCRN_PLB0_ACR), mfdcr(DCRN_PLB0_BESRH),
+	       mfdcr(DCRN_PLB0_BESRL));
+	printk("PLB1: BEAR=0x%08x%08x ACR=  0x%08x BESR= 0x%08x%08x\n",
+	       mfdcr(DCRN_PLB1_BEARH), mfdcr(DCRN_PLB1_BEARL),
+	       mfdcr(DCRN_PLB1_ACR), mfdcr(DCRN_PLB1_BESRH),
+	       mfdcr(DCRN_PLB1_BESRL));
+#else
     	printk("PLB0: BEAR=0x%08x%08x ACR=  0x%08x BESR= 0x%08x\n",
 		mfdcr(DCRN_PLB0_BEARH), mfdcr(DCRN_PLB0_BEARL),
 		mfdcr(DCRN_PLB0_ACR),  mfdcr(DCRN_PLB0_BESR));
+#endif
 	printk("POB0: BEAR=0x%08x%08x BESR0=0x%08x BESR1=0x%08x\n",
 		mfdcr(DCRN_POB0_BEARH), mfdcr(DCRN_POB0_BEARL),
 		mfdcr(DCRN_POB0_BESR0), mfdcr(DCRN_POB0_BESR1));
diff --git a/arch/ppc/syslib/ibm44x_common.h b/arch/ppc/syslib/ibm44x_common.h
index c16b6a5ac6ab..b25a8995e4e9 100644
--- a/arch/ppc/syslib/ibm44x_common.h
+++ b/arch/ppc/syslib/ibm44x_common.h
@@ -36,7 +36,8 @@ struct ibm44x_clocks {
 };
 
 /* common 44x platform init */
-void ibm44x_platform_init(void) __init;
+void ibm44x_platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+			  unsigned long r6, unsigned long r7) __init;
 
 /* initialize decrementer and tick-related variables */
 void ibm44x_calibrate_decr(unsigned int freq) __init;
diff --git a/arch/ppc/syslib/ipic.h b/arch/ppc/syslib/ipic.h
index 2b56a4fcf373..a7ce7da8785c 100644
--- a/arch/ppc/syslib/ipic.h
+++ b/arch/ppc/syslib/ipic.h
@@ -3,7 +3,7 @@
  *
  * IPIC private definitions and structure.
  *
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
  *
  * Copyright 2005 Freescale Semiconductor, Inc
  *
diff --git a/arch/ppc/syslib/m8260_setup.c b/arch/ppc/syslib/m8260_setup.c
index 8f80a42dfdb7..76a2aa4ce65e 100644
--- a/arch/ppc/syslib/m8260_setup.c
+++ b/arch/ppc/syslib/m8260_setup.c
@@ -62,6 +62,10 @@ m8260_setup_arch(void)
 	if (initrd_start)
 		ROOT_DEV = Root_RAM0;
 #endif
+
+	identify_ppc_sys_by_name_and_id(BOARD_CHIP_NAME,
+				in_be32(CPM_MAP_ADDR + CPM_IMMR_OFFSET));
+
 	m82xx_board_setup();
 }
 
diff --git a/arch/ppc/syslib/m82xx_pci.c b/arch/ppc/syslib/m82xx_pci.c
index 9db58c587b46..1941a8c7ca9a 100644
--- a/arch/ppc/syslib/m82xx_pci.c
+++ b/arch/ppc/syslib/m82xx_pci.c
@@ -248,7 +248,8 @@ pq2ads_setup_pci(struct pci_controller *hose)
 	pci_div = ( (sccr & SCCR_PCI_MODCK) ? 2 : 1) *
 			( ( (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT) + 1);
 	freq = (uint)((2*binfo->bi_cpmfreq)/(pci_div));
-	time = (int)666666/freq;
+	time = (int)66666666/freq;
+
 	/* due to PCI Local Bus spec, some devices needs to wait such a long
 	time after RST 	deassertion. More specifically, 0.508s for 66MHz & twice more for 33 */
 	printk("%s: The PCI bus is %d Mhz.\nWaiting %s after deasserting RST...\n",__FILE__,freq,
@@ -302,11 +303,11 @@ pq2ads_setup_pci(struct pci_controller *hose)
 
 void __init pq2_find_bridges(void)
 {
-	extern int pci_assign_all_busses;
+	extern int pci_assign_all_buses;
 	struct pci_controller * hose;
 	int host_bridge;
 
-	pci_assign_all_busses = 1;
+	pci_assign_all_buses = 1;
 
 	hose = pcibios_alloc_controller();
 
diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c
index 4c888da89b3c..1cc3abe6fa43 100644
--- a/arch/ppc/syslib/m8xx_setup.c
+++ b/arch/ppc/syslib/m8xx_setup.c
@@ -45,6 +45,7 @@
 #include <asm/bootinfo.h>
 #include <asm/time.h>
 #include <asm/xmon.h>
+#include <asm/ppc_sys.h>
 
 #include "ppc8xx_pic.h"
 
@@ -144,12 +145,12 @@ void __init m8xx_calibrate_decr(void)
 	int freq, fp, divisor;
 
 	/* Unlock the SCCR. */
-	((volatile immap_t *)IMAP_ADDR)->im_clkrstk.cark_sccrk = ~KAPWR_KEY;
-	((volatile immap_t *)IMAP_ADDR)->im_clkrstk.cark_sccrk = KAPWR_KEY;
+	out_be32(&((immap_t *)IMAP_ADDR)->im_clkrstk.cark_sccrk, ~KAPWR_KEY);
+	out_be32(&((immap_t *)IMAP_ADDR)->im_clkrstk.cark_sccrk, KAPWR_KEY);
 
 	/* Force all 8xx processors to use divide by 16 processor clock. */
-	((volatile immap_t *)IMAP_ADDR)->im_clkrst.car_sccr |= 0x02000000;
-
+	out_be32(&((immap_t *)IMAP_ADDR)->im_clkrst.car_sccr,
+		in_be32(&((immap_t *)IMAP_ADDR)->im_clkrst.car_sccr)|0x02000000);
 	/* Processor frequency is MHz.
 	 * The value 'fp' is the number of decrementer ticks per second.
 	 */
@@ -175,28 +176,24 @@ void __init m8xx_calibrate_decr(void)
 	 * we guarantee the registers are locked, then we unlock them
 	 * for our use.
 	 */
-	((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_tbscrk = ~KAPWR_KEY;
-	((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_rtcsck = ~KAPWR_KEY;
-	((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_tbk    = ~KAPWR_KEY;
-	((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_tbscrk =  KAPWR_KEY;
-	((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_rtcsck =  KAPWR_KEY;
-	((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_tbk    =  KAPWR_KEY;
+	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_tbscrk, ~KAPWR_KEY);
+	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_rtcsck, ~KAPWR_KEY);
+	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_tbk, ~KAPWR_KEY);
+	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_tbscrk, KAPWR_KEY);
+	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_rtcsck, KAPWR_KEY);
+	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_tbk, KAPWR_KEY);
 
 	/* Disable the RTC one second and alarm interrupts. */
-	((volatile immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc &=
-						~(RTCSC_SIE | RTCSC_ALE);
+	out_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc, in_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc) & ~(RTCSC_SIE | RTCSC_ALE));
 	/* Enable the RTC */
-	((volatile immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc |=
-						(RTCSC_RTF | RTCSC_RTE);
+	out_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc, in_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc) | (RTCSC_RTF | RTCSC_RTE));
 
 	/* Enabling the decrementer also enables the timebase interrupts
 	 * (or from the other point of view, to get decrementer interrupts
 	 * we have to enable the timebase).  The decrementer interrupt
 	 * is wired into the vector table, nothing to do here for that.
 	 */
-	((volatile immap_t *)IMAP_ADDR)->im_sit.sit_tbscr =
-				((mk_int_int_mask(DEC_INTERRUPT) << 8) |
-					 (TBSCR_TBF | TBSCR_TBE));
+	out_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_tbscr, (mk_int_int_mask(DEC_INTERRUPT) << 8) | (TBSCR_TBF | TBSCR_TBE));
 
 	if (setup_irq(DEC_INTERRUPT, &tbint_irqaction))
 		panic("Could not allocate timer IRQ!");
@@ -216,9 +213,9 @@ void __init m8xx_calibrate_decr(void)
 static int
 m8xx_set_rtc_time(unsigned long time)
 {
-	((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_rtck = KAPWR_KEY;
-	((volatile immap_t *)IMAP_ADDR)->im_sit.sit_rtc = time;
-	((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_rtck = ~KAPWR_KEY;
+	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_rtck, KAPWR_KEY);
+	out_be32(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtc, time);
+	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_rtck, ~KAPWR_KEY);
 	return(0);
 }
 
@@ -226,7 +223,7 @@ static unsigned long
 m8xx_get_rtc_time(void)
 {
 	/* Get time from the RTC. */
-	return((unsigned long)(((immap_t *)IMAP_ADDR)->im_sit.sit_rtc));
+	return (unsigned long) in_be32(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtc);
 }
 
 static void
@@ -235,13 +232,13 @@ m8xx_restart(char *cmd)
 	__volatile__ unsigned char dummy;
 
 	local_irq_disable();
-	((immap_t *)IMAP_ADDR)->im_clkrst.car_plprcr |= 0x00000080;
+	out_be32(&((immap_t *)IMAP_ADDR)->im_clkrst.car_plprcr, in_be32(&((immap_t *)IMAP_ADDR)->im_clkrst.car_plprcr) | 0x00000080);
 
 	/* Clear the ME bit in MSR to cause checkstop on machine check
 	*/
 	mtmsr(mfmsr() & ~0x1000);
 
-	dummy = ((immap_t *)IMAP_ADDR)->im_clkrst.res[0];
+	dummy = in_8(&((immap_t *)IMAP_ADDR)->im_clkrst.res[0]);
 	printk("Restart failed\n");
 	while(1);
 }
@@ -306,8 +303,7 @@ m8xx_init_IRQ(void)
 	i8259_init(0);
 
 	/* The i8259 cascade interrupt must be level sensitive. */
-	((immap_t *)IMAP_ADDR)->im_siu_conf.sc_siel &=
-		~(0x80000000 >> ISA_BRIDGE_INT);
+	out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_siel, in_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_siel & ~(0x80000000 >> ISA_BRIDGE_INT)));
 
 	if (setup_irq(ISA_BRIDGE_INT, &mbx_i8259_irqaction))
 		enable_irq(ISA_BRIDGE_INT);
@@ -404,9 +400,10 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 		strcpy(cmd_line, (char *)(r6+KERNELBASE));
 	}
 
+	identify_ppc_sys_by_name(BOARD_CHIP_NAME);
+
 	ppc_md.setup_arch		= m8xx_setup_arch;
 	ppc_md.show_percpuinfo		= m8xx_show_percpuinfo;
-	ppc_md.irq_canonicalize	= NULL;
 	ppc_md.init_IRQ			= m8xx_init_IRQ;
 	ppc_md.get_irq			= m8xx_get_irq;
 	ppc_md.init			= NULL;
diff --git a/arch/ppc/syslib/m8xx_wdt.c b/arch/ppc/syslib/m8xx_wdt.c
index 2ddc857e7fc7..a21632d37e5a 100644
--- a/arch/ppc/syslib/m8xx_wdt.c
+++ b/arch/ppc/syslib/m8xx_wdt.c
@@ -14,6 +14,7 @@
 #include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
+#include <asm/io.h>
 #include <asm/8xx_immap.h>
 #include <syslib/m8xx_wdt.h>
 
@@ -29,8 +30,8 @@ void m8xx_wdt_reset(void)
 {
 	volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR;
 
-	imap->im_siu_conf.sc_swsr = 0x556c;	/* write magic1 */
-	imap->im_siu_conf.sc_swsr = 0xaa39;	/* write magic2 */
+	out_be16(&imap->im_siu_conf.sc_swsr, 0x556c);	/* write magic1 */
+	out_be16(&imap->im_siu_conf.sc_swsr, 0xaa39);	/* write magic2 */
 }
 
 static irqreturn_t m8xx_wdt_interrupt(int irq, void *dev, struct pt_regs *regs)
@@ -39,7 +40,7 @@ static irqreturn_t m8xx_wdt_interrupt(int irq, void *dev, struct pt_regs *regs)
 
 	m8xx_wdt_reset();
 
-	imap->im_sit.sit_piscr |= PISCR_PS;	/* clear irq */
+	out_be16(&imap->im_sit.sit_piscr, in_be16(&imap->im_sit.sit_piscr) | PISCR_PS);	/* clear irq */
 
 	return IRQ_HANDLED;
 }
@@ -51,7 +52,7 @@ void __init m8xx_wdt_handler_install(bd_t * binfo)
 	u32 sypcr;
 	u32 pitrtclk;
 
-	sypcr = imap->im_siu_conf.sc_sypcr;
+	sypcr = in_be32(&imap->im_siu_conf.sc_sypcr);
 
 	if (!(sypcr & 0x04)) {
 		printk(KERN_NOTICE "m8xx_wdt: wdt disabled (SYPCR: 0x%08X)\n",
@@ -87,9 +88,9 @@ void __init m8xx_wdt_handler_install(bd_t * binfo)
 	else
 		pitc = pitrtclk * wdt_timeout / binfo->bi_intfreq / 2;
 
-	imap->im_sit.sit_pitc = pitc << 16;
-	imap->im_sit.sit_piscr =
-	    (mk_int_int_mask(PIT_INTERRUPT) << 8) | PISCR_PIE | PISCR_PTE;
+	out_be32(&imap->im_sit.sit_pitc, pitc << 16);
+
+	out_be16(&imap->im_sit.sit_piscr, (mk_int_int_mask(PIT_INTERRUPT) << 8) | PISCR_PIE | PISCR_PTE);
 
 	if (setup_irq(PIT_INTERRUPT, &m8xx_wdt_irqaction))
 		panic("m8xx_wdt: error setting up the watchdog irq!");
diff --git a/arch/ppc/syslib/mpc52xx_devices.c b/arch/ppc/syslib/mpc52xx_devices.c
index ad5182efca1d..da3c74bfdc92 100644
--- a/arch/ppc/syslib/mpc52xx_devices.c
+++ b/arch/ppc/syslib/mpc52xx_devices.c
@@ -15,6 +15,7 @@
 
 #include <linux/fsl_devices.h>
 #include <linux/resource.h>
+#include <linux/platform_device.h>
 #include <asm/mpc52xx.h>
 #include <asm/ppc_sys.h>
 
diff --git a/arch/ppc/syslib/mpc52xx_pci.c b/arch/ppc/syslib/mpc52xx_pci.c
index 59cf3e8bd1a0..4ac19080eb85 100644
--- a/arch/ppc/syslib/mpc52xx_pci.c
+++ b/arch/ppc/syslib/mpc52xx_pci.c
@@ -21,6 +21,7 @@
 #include "mpc52xx_pci.h"
 
 #include <asm/delay.h>
+#include <asm/machdep.h>
 
 
 static int
@@ -181,7 +182,7 @@ mpc52xx_find_bridges(void)
 	struct mpc52xx_pci __iomem *pci_regs;
 	struct pci_controller *hose;
 
-	pci_assign_all_busses = 1;
+	pci_assign_all_buses = 1;
 
 	pci_regs = ioremap(MPC52xx_PA(MPC52xx_PCI_OFFSET), MPC52xx_PCI_SIZE);
 	if (!pci_regs)
diff --git a/arch/ppc/syslib/mpc83xx_devices.c b/arch/ppc/syslib/mpc83xx_devices.c
index 95b3b8a7f0ba..847df4409982 100644
--- a/arch/ppc/syslib/mpc83xx_devices.c
+++ b/arch/ppc/syslib/mpc83xx_devices.c
@@ -3,7 +3,7 @@
  *
  * MPC83xx Device descriptions
  *
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
  *
  * Copyright 2005 Freescale Semiconductor Inc.
  *
@@ -21,23 +21,26 @@
 #include <asm/mpc83xx.h>
 #include <asm/irq.h>
 #include <asm/ppc_sys.h>
+#include <asm/machdep.h>
 
 /* We use offsets for IORESOURCE_MEM since we do not know at compile time
  * what IMMRBAR is, will get fixed up by mach_mpc83xx_fixup
  */
 
+struct gianfar_mdio_data mpc83xx_mdio_pdata = {
+	.paddr = 0x24520,
+};
+
 static struct gianfar_platform_data mpc83xx_tsec1_pdata = {
 	.device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
 	    FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON |
 	    FSL_GIANFAR_DEV_HAS_MULTI_INTR,
-	.phy_reg_addr = 0x24000,
 };
 
 static struct gianfar_platform_data mpc83xx_tsec2_pdata = {
 	.device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
 	    FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON |
 	    FSL_GIANFAR_DEV_HAS_MULTI_INTR,
-	.phy_reg_addr = 0x24000,
 };
 
 static struct fsl_i2c_platform_data mpc83xx_fsl_i2c1_pdata = {
@@ -219,6 +222,12 @@ struct platform_device ppc_sys_platform_devices[] = {
 			},
 		},
 	},
+	[MPC83xx_MDIO] = {
+		.name = "fsl-gianfar_mdio",
+		.id = 0,
+		.dev.platform_data = &mpc83xx_mdio_pdata,
+		.num_resources = 0,
+	},
 };
 
 static int __init mach_mpc83xx_fixup(struct platform_device *pdev)
diff --git a/arch/ppc/syslib/mpc83xx_sys.c b/arch/ppc/syslib/mpc83xx_sys.c
index 29aa63350025..82cf3ab77f4a 100644
--- a/arch/ppc/syslib/mpc83xx_sys.c
+++ b/arch/ppc/syslib/mpc83xx_sys.c
@@ -3,7 +3,7 @@
  *
  * MPC83xx System descriptions
  *
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
  *
  * Copyright 2005 Freescale Semiconductor Inc.
  *
@@ -24,72 +24,96 @@ struct ppc_sys_spec ppc_sys_specs[] = {
 		.ppc_sys_name	= "8349E",
 		.mask 		= 0xFFFF0000,
 		.value 		= 0x80500000,
-		.num_devices	= 8,
+		.num_devices	= 9,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1,
 			MPC83xx_IIC2, MPC83xx_DUART, MPC83xx_SEC2,
-			MPC83xx_USB2_DR, MPC83xx_USB2_MPH
+			MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO
 		},
 	},
 	{
 		.ppc_sys_name	= "8349",
 		.mask 		= 0xFFFF0000,
 		.value 		= 0x80510000,
-		.num_devices	= 7,
+		.num_devices	= 8,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1,
 			MPC83xx_IIC2, MPC83xx_DUART,
-			MPC83xx_USB2_DR, MPC83xx_USB2_MPH
+			MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO
 		},
 	},
 	{
 		.ppc_sys_name	= "8347E",
 		.mask 		= 0xFFFF0000,
 		.value 		= 0x80520000,
-		.num_devices	= 8,
+		.num_devices	= 9,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1,
 			MPC83xx_IIC2, MPC83xx_DUART, MPC83xx_SEC2,
-			MPC83xx_USB2_DR, MPC83xx_USB2_MPH
+			MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO
 		},
 	},
 	{
 		.ppc_sys_name	= "8347",
 		.mask 		= 0xFFFF0000,
 		.value 		= 0x80530000,
-		.num_devices	= 7,
+		.num_devices	= 8,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1,
 			MPC83xx_IIC2, MPC83xx_DUART,
-			MPC83xx_USB2_DR, MPC83xx_USB2_MPH
+			MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO
 		},
 	},
 	{
-		.ppc_sys_name	= "8343E",
+		.ppc_sys_name	= "8347E",
 		.mask 		= 0xFFFF0000,
 		.value 		= 0x80540000,
-		.num_devices	= 7,
+		.num_devices	= 9,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1,
 			MPC83xx_IIC2, MPC83xx_DUART, MPC83xx_SEC2,
-			MPC83xx_USB2_DR,
+			MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO
 		},
 	},
 	{
-		.ppc_sys_name	= "8343",
+		.ppc_sys_name	= "8347",
 		.mask 		= 0xFFFF0000,
 		.value 		= 0x80550000,
-		.num_devices	= 6,
+		.num_devices	= 8,
+		.device_list	= (enum ppc_sys_devices[])
+		{
+			MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1,
+			MPC83xx_IIC2, MPC83xx_DUART,
+			MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO
+		},
+	},
+	{
+		.ppc_sys_name	= "8343E",
+		.mask 		= 0xFFFF0000,
+		.value 		= 0x80560000,
+		.num_devices	= 8,
+		.device_list	= (enum ppc_sys_devices[])
+		{
+			MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1,
+			MPC83xx_IIC2, MPC83xx_DUART, MPC83xx_SEC2,
+			MPC83xx_USB2_DR, MPC83xx_MDIO
+		},
+	},
+	{
+		.ppc_sys_name	= "8343",
+		.mask 		= 0xFFFF0000,
+		.value 		= 0x80570000,
+		.num_devices	= 7,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1,
 			MPC83xx_IIC2, MPC83xx_DUART,
-			MPC83xx_USB2_DR,
+			MPC83xx_USB2_DR, MPC83xx_MDIO
 		},
 	},
 	{	/* default match */
diff --git a/arch/ppc/syslib/mpc85xx_devices.c b/arch/ppc/syslib/mpc85xx_devices.c
index bbc5ac0de878..69949d255658 100644
--- a/arch/ppc/syslib/mpc85xx_devices.c
+++ b/arch/ppc/syslib/mpc85xx_devices.c
@@ -3,7 +3,7 @@
  *
  * MPC85xx Device descriptions
  *
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
  *
  * Copyright 2005 Freescale Semiconductor Inc.
  *
@@ -25,19 +25,20 @@
 /* We use offsets for IORESOURCE_MEM since we do not know at compile time
  * what CCSRBAR is, will get fixed up by mach_mpc85xx_fixup
  */
+struct gianfar_mdio_data mpc85xx_mdio_pdata = {
+	.paddr = MPC85xx_MIIM_OFFSET,
+};
 
 static struct gianfar_platform_data mpc85xx_tsec1_pdata = {
 	.device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
 	    FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON |
 	    FSL_GIANFAR_DEV_HAS_MULTI_INTR,
-	.phy_reg_addr = MPC85xx_ENET1_OFFSET,
 };
 
 static struct gianfar_platform_data mpc85xx_tsec2_pdata = {
 	.device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
 	    FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON |
 	    FSL_GIANFAR_DEV_HAS_MULTI_INTR,
-	.phy_reg_addr = MPC85xx_ENET1_OFFSET,
 };
 
 static struct gianfar_platform_data mpc85xx_etsec1_pdata = {
@@ -46,7 +47,6 @@ static struct gianfar_platform_data mpc85xx_etsec1_pdata = {
 	    FSL_GIANFAR_DEV_HAS_MULTI_INTR |
 	    FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN |
 	    FSL_GIANFAR_DEV_HAS_EXTENDED_HASH,
-	.phy_reg_addr = MPC85xx_ENET1_OFFSET,
 };
 
 static struct gianfar_platform_data mpc85xx_etsec2_pdata = {
@@ -55,7 +55,6 @@ static struct gianfar_platform_data mpc85xx_etsec2_pdata = {
 	    FSL_GIANFAR_DEV_HAS_MULTI_INTR |
 	    FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN |
 	    FSL_GIANFAR_DEV_HAS_EXTENDED_HASH,
-	.phy_reg_addr = MPC85xx_ENET1_OFFSET,
 };
 
 static struct gianfar_platform_data mpc85xx_etsec3_pdata = {
@@ -64,7 +63,6 @@ static struct gianfar_platform_data mpc85xx_etsec3_pdata = {
 	    FSL_GIANFAR_DEV_HAS_MULTI_INTR |
 	    FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN |
 	    FSL_GIANFAR_DEV_HAS_EXTENDED_HASH,
-	.phy_reg_addr = MPC85xx_ENET1_OFFSET,
 };
 
 static struct gianfar_platform_data mpc85xx_etsec4_pdata = {
@@ -73,11 +71,10 @@ static struct gianfar_platform_data mpc85xx_etsec4_pdata = {
 	    FSL_GIANFAR_DEV_HAS_MULTI_INTR |
 	    FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN |
 	    FSL_GIANFAR_DEV_HAS_EXTENDED_HASH,
-	.phy_reg_addr = MPC85xx_ENET1_OFFSET,
 };
 
 static struct gianfar_platform_data mpc85xx_fec_pdata = {
-	.phy_reg_addr = MPC85xx_ENET1_OFFSET,
+	.device_flags = 0,
 };
 
 static struct fsl_i2c_platform_data mpc85xx_fsl_i2c_pdata = {
@@ -719,6 +716,12 @@ struct platform_device ppc_sys_platform_devices[] = {
 			},
 		},
 	},
+	[MPC85xx_MDIO] = {
+		.name = "fsl-gianfar_mdio",
+		.id = 0,
+		.dev.platform_data = &mpc85xx_mdio_pdata,
+		.num_resources = 0,
+	},
 };
 
 static int __init mach_mpc85xx_fixup(struct platform_device *pdev)
diff --git a/arch/ppc/syslib/mpc85xx_sys.c b/arch/ppc/syslib/mpc85xx_sys.c
index 6e3184ab354f..397cfbcce5ea 100644
--- a/arch/ppc/syslib/mpc85xx_sys.c
+++ b/arch/ppc/syslib/mpc85xx_sys.c
@@ -3,7 +3,7 @@
  *
  * MPC85xx System descriptions
  *
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
  *
  * Copyright 2005 Freescale Semiconductor Inc.
  *
@@ -24,19 +24,19 @@ struct ppc_sys_spec ppc_sys_specs[] = {
 		.ppc_sys_name	= "8540",
 		.mask 		= 0xFFFF0000,
 		.value 		= 0x80300000,
-		.num_devices	= 10,
+		.num_devices	= 11,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_FEC, MPC85xx_IIC1,
 			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
-			MPC85xx_PERFMON, MPC85xx_DUART,
+			MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_MDIO,
 		},
 	},
 	{
 		.ppc_sys_name	= "8560",
 		.mask 		= 0xFFFF0000,
 		.value 		= 0x80700000,
-		.num_devices	= 19,
+		.num_devices	= 20,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1,
@@ -45,14 +45,14 @@ struct ppc_sys_spec ppc_sys_specs[] = {
 			MPC85xx_CPM_SPI, MPC85xx_CPM_I2C, MPC85xx_CPM_SCC1,
 			MPC85xx_CPM_SCC2, MPC85xx_CPM_SCC3, MPC85xx_CPM_SCC4,
 			MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2, MPC85xx_CPM_FCC3,
-			MPC85xx_CPM_MCC1, MPC85xx_CPM_MCC2,
+			MPC85xx_CPM_MCC1, MPC85xx_CPM_MCC2, MPC85xx_MDIO,
 		},
 	},
 	{
 		.ppc_sys_name	= "8541",
 		.mask 		= 0xFFFF0000,
 		.value 		= 0x80720000,
-		.num_devices	= 13,
+		.num_devices	= 14,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1,
@@ -60,13 +60,14 @@ struct ppc_sys_spec ppc_sys_specs[] = {
 			MPC85xx_PERFMON, MPC85xx_DUART,
 			MPC85xx_CPM_SPI, MPC85xx_CPM_I2C,
 			MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2,
+			MPC85xx_MDIO,
 		},
 	},
 	{
 		.ppc_sys_name	= "8541E",
 		.mask 		= 0xFFFF0000,
 		.value 		= 0x807A0000,
-		.num_devices	= 14,
+		.num_devices	= 15,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1,
@@ -74,13 +75,14 @@ struct ppc_sys_spec ppc_sys_specs[] = {
 			MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
 			MPC85xx_CPM_SPI, MPC85xx_CPM_I2C,
 			MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2,
+			MPC85xx_MDIO,
 		},
 	},
 	{
 		.ppc_sys_name	= "8555",
 		.mask 		= 0xFFFF0000,
 		.value 		= 0x80710000,
-		.num_devices	= 19,
+		.num_devices	= 20,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1,
@@ -91,13 +93,14 @@ struct ppc_sys_spec ppc_sys_specs[] = {
 			MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2,
 			MPC85xx_CPM_SMC1, MPC85xx_CPM_SMC2,
 			MPC85xx_CPM_USB,
+			MPC85xx_MDIO,
 		},
 	},
 	{
 		.ppc_sys_name	= "8555E",
 		.mask 		= 0xFFFF0000,
 		.value 		= 0x80790000,
-		.num_devices	= 20,
+		.num_devices	= 21,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1,
@@ -108,6 +111,7 @@ struct ppc_sys_spec ppc_sys_specs[] = {
 			MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2,
 			MPC85xx_CPM_SMC1, MPC85xx_CPM_SMC2,
 			MPC85xx_CPM_USB,
+			MPC85xx_MDIO,
 		},
 	},
 	/* SVRs on 8548 rev1.0 matches for 8548/8547/8545 */
@@ -115,104 +119,112 @@ struct ppc_sys_spec ppc_sys_specs[] = {
 		.ppc_sys_name	= "8548E",
 		.mask 		= 0xFFFF00F0,
 		.value 		= 0x80390010,
-		.num_devices	= 13,
+		.num_devices	= 14,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3,
 			MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2,
 			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
 			MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
+			MPC85xx_MDIO,
 		},
 	},
 	{
 		.ppc_sys_name	= "8548",
 		.mask 		= 0xFFFF00F0,
 		.value 		= 0x80310010,
-		.num_devices	= 12,
+		.num_devices	= 13,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3,
 			MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2,
 			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
 			MPC85xx_PERFMON, MPC85xx_DUART,
+			MPC85xx_MDIO,
 		},
 	},
 	{
 		.ppc_sys_name	= "8547E",
 		.mask 		= 0xFFFF00F0,
 		.value 		= 0x80390010,
-		.num_devices	= 13,
+		.num_devices	= 14,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3,
 			MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2,
 			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
 			MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
+			MPC85xx_MDIO,
 		},
 	},
 	{
 		.ppc_sys_name	= "8547",
 		.mask 		= 0xFFFF00F0,
 		.value 		= 0x80310010,
-		.num_devices	= 12,
+		.num_devices	= 13,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3,
 			MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2,
 			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
 			MPC85xx_PERFMON, MPC85xx_DUART,
+			MPC85xx_MDIO,
 		},
 	},
 	{
 		.ppc_sys_name	= "8545E",
 		.mask 		= 0xFFFF00F0,
 		.value 		= 0x80390010,
-		.num_devices	= 11,
+		.num_devices	= 12,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC85xx_eTSEC1, MPC85xx_eTSEC2,
 			MPC85xx_IIC1, MPC85xx_IIC2,
 			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
 			MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
+			MPC85xx_MDIO,
 		},
 	},
 	{
 		.ppc_sys_name	= "8545",
 		.mask 		= 0xFFFF00F0,
 		.value 		= 0x80310010,
-		.num_devices	= 10,
+		.num_devices	= 11,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC85xx_eTSEC1, MPC85xx_eTSEC2,
 			MPC85xx_IIC1, MPC85xx_IIC2,
 			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
 			MPC85xx_PERFMON, MPC85xx_DUART,
+			MPC85xx_MDIO,
 		},
 	},
 	{
 		.ppc_sys_name	= "8543E",
 		.mask 		= 0xFFFF00F0,
 		.value 		= 0x803A0010,
-		.num_devices	= 11,
+		.num_devices	= 12,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC85xx_eTSEC1, MPC85xx_eTSEC2,
 			MPC85xx_IIC1, MPC85xx_IIC2,
 			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
 			MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
+			MPC85xx_MDIO,
 		},
 	},
 	{
 		.ppc_sys_name	= "8543",
 		.mask 		= 0xFFFF00F0,
 		.value 		= 0x80320010,
-		.num_devices	= 10,
+		.num_devices	= 11,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC85xx_eTSEC1, MPC85xx_eTSEC2,
 			MPC85xx_IIC1, MPC85xx_IIC2,
 			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
 			MPC85xx_PERFMON, MPC85xx_DUART,
+			MPC85xx_MDIO,
 		},
 	},
 	{	/* default match */
diff --git a/arch/ppc/syslib/mpc8xx_devices.c b/arch/ppc/syslib/mpc8xx_devices.c
index 2b5f0e701687..92dc98b36bde 100644
--- a/arch/ppc/syslib/mpc8xx_devices.c
+++ b/arch/ppc/syslib/mpc8xx_devices.c
@@ -3,7 +3,7 @@
  *
  * MPC8xx Device descriptions
  *
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
  *
  * Copyright 2005 MontaVista Software, Inc. by Vitaly Bordug<vbordug@ru.mvista.com>
  *
diff --git a/arch/ppc/syslib/mpc8xx_sys.c b/arch/ppc/syslib/mpc8xx_sys.c
index a532ccc861c0..d3c617521603 100644
--- a/arch/ppc/syslib/mpc8xx_sys.c
+++ b/arch/ppc/syslib/mpc8xx_sys.c
@@ -3,7 +3,7 @@
  *
  * MPC8xx System descriptions
  *
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
  *
  * Copyright 2005 MontaVista Software, Inc. by Vitaly Bordug <vbordug@ru.mvista.com>
  *
@@ -24,7 +24,7 @@ struct ppc_sys_spec ppc_sys_specs[] = {
 		.ppc_sys_name	= "MPC86X",
 		.mask 		= 0xFFFFFFFF,
 		.value 		= 0x00000000,
-		.num_devices	= 2,
+		.num_devices	= 7,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC8xx_CPM_FEC1,
@@ -40,7 +40,7 @@ struct ppc_sys_spec ppc_sys_specs[] = {
 		.ppc_sys_name	= "MPC885",
 		.mask 		= 0xFFFFFFFF,
 		.value 		= 0x00000000,
-		.num_devices	= 3,
+		.num_devices	= 8,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC8xx_CPM_FEC1,
diff --git a/arch/ppc/syslib/mv64360_pic.c b/arch/ppc/syslib/mv64360_pic.c
index 8356da4678a2..58b0aa813e85 100644
--- a/arch/ppc/syslib/mv64360_pic.c
+++ b/arch/ppc/syslib/mv64360_pic.c
@@ -48,6 +48,7 @@
 #include <asm/system.h>
 #include <asm/irq.h>
 #include <asm/mv64x60.h>
+#include <asm/machdep.h>
 
 #ifdef CONFIG_IRQ_ALL_CPUS
 #error "The mv64360 does not support distribution of IRQs on all CPUs"
diff --git a/arch/ppc/syslib/mv64x60.c b/arch/ppc/syslib/mv64x60.c
index 839f8872826f..94ea346b7b4b 100644
--- a/arch/ppc/syslib/mv64x60.c
+++ b/arch/ppc/syslib/mv64x60.c
@@ -19,6 +19,7 @@
 #include <linux/string.h>
 #include <linux/spinlock.h>
 #include <linux/mv643xx.h>
+#include <linux/platform_device.h>
 
 #include <asm/byteorder.h>
 #include <asm/io.h>
@@ -34,7 +35,7 @@ u8 mv64x60_pci_exclude_bridge = 1;
 DEFINE_SPINLOCK(mv64x60_lock);
 
 static phys_addr_t 	mv64x60_bridge_pbase;
-static void 		*mv64x60_bridge_vbase;
+static void 		__iomem *mv64x60_bridge_vbase;
 static u32		mv64x60_bridge_type = MV64x60_TYPE_INVALID;
 static u32		mv64x60_bridge_rev;
 #if defined(CONFIG_SYSFS) && !defined(CONFIG_GT64260)
@@ -938,7 +939,7 @@ mv64x60_setup_for_chip(struct mv64x60_handle *bh)
  *
  * Return the virtual address of the bridge's registers.
  */
-void *
+void __iomem *
 mv64x60_get_bridge_vbase(void)
 {
 	return mv64x60_bridge_vbase;
@@ -1304,7 +1305,7 @@ mv64x60_config_pci_params(struct pci_controller *hose,
 	early_write_config_word(hose, 0, devfn, PCI_COMMAND, u16_val);
 
 	/* Set latency timer, cache line size, clear BIST */
-	u16_val = (pi->latency_timer << 8) | (L1_CACHE_LINE_SIZE >> 2);
+	u16_val = (pi->latency_timer << 8) | (L1_CACHE_BYTES >> 2);
 	early_write_config_word(hose, 0, devfn, PCI_CACHE_LINE_SIZE, u16_val);
 
 	mv64x60_pci_exclude_bridge = save_exclude;
diff --git a/arch/ppc/syslib/mv64x60_dbg.c b/arch/ppc/syslib/mv64x60_dbg.c
index 2927c7adf5e5..fa5b2e45e0ca 100644
--- a/arch/ppc/syslib/mv64x60_dbg.c
+++ b/arch/ppc/syslib/mv64x60_dbg.c
@@ -24,6 +24,7 @@
 #include <linux/irq.h>
 #include <asm/delay.h>
 #include <asm/mv64x60.h>
+#include <asm/machdep.h>
 
 
 #if defined(CONFIG_SERIAL_TEXT_DEBUG)
diff --git a/arch/ppc/syslib/of_device.c b/arch/ppc/syslib/of_device.c
deleted file mode 100644
index da8a0f2128dc..000000000000
--- a/arch/ppc/syslib/of_device.c
+++ /dev/null
@@ -1,274 +0,0 @@
-#include <linux/config.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mod_devicetable.h>
-#include <asm/errno.h>
-#include <asm/of_device.h>
-
-/**
- * of_match_device - Tell if an of_device structure has a matching
- * of_match structure
- * @ids: array of of device match structures to search in
- * @dev: the of device structure to match against
- *
- * Used by a driver to check whether an of_device present in the
- * system is in its list of supported devices.
- */
-const struct of_device_id * of_match_device(const struct of_device_id *matches,
-					const struct of_device *dev)
-{
-	if (!dev->node)
-		return NULL;
-	while (matches->name[0] || matches->type[0] || matches->compatible[0]) {
-		int match = 1;
-		if (matches->name[0])
-			match &= dev->node->name
-				&& !strcmp(matches->name, dev->node->name);
-		if (matches->type[0])
-			match &= dev->node->type
-				&& !strcmp(matches->type, dev->node->type);
-		if (matches->compatible[0])
-			match &= device_is_compatible(dev->node,
-				matches->compatible);
-		if (match)
-			return matches;
-		matches++;
-	}
-	return NULL;
-}
-
-static int of_platform_bus_match(struct device *dev, struct device_driver *drv)
-{
-	struct of_device * of_dev = to_of_device(dev);
-	struct of_platform_driver * of_drv = to_of_platform_driver(drv);
-	const struct of_device_id * matches = of_drv->match_table;
-
-	if (!matches)
-		return 0;
-
-	return of_match_device(matches, of_dev) != NULL;
-}
-
-struct of_device *of_dev_get(struct of_device *dev)
-{
-	struct device *tmp;
-
-	if (!dev)
-		return NULL;
-	tmp = get_device(&dev->dev);
-	if (tmp)
-		return to_of_device(tmp);
-	else
-		return NULL;
-}
-
-void of_dev_put(struct of_device *dev)
-{
-	if (dev)
-		put_device(&dev->dev);
-}
-
-
-static int of_device_probe(struct device *dev)
-{
-	int error = -ENODEV;
-	struct of_platform_driver *drv;
-	struct of_device *of_dev;
-	const struct of_device_id *match;
-
-	drv = to_of_platform_driver(dev->driver);
-	of_dev = to_of_device(dev);
-
-	if (!drv->probe)
-		return error;
-
-	of_dev_get(of_dev);
-
-	match = of_match_device(drv->match_table, of_dev);
-	if (match)
-		error = drv->probe(of_dev, match);
-	if (error)
-		of_dev_put(of_dev);
-
-	return error;
-}
-
-static int of_device_remove(struct device *dev)
-{
-	struct of_device * of_dev = to_of_device(dev);
-	struct of_platform_driver * drv = to_of_platform_driver(dev->driver);
-
-	if (dev->driver && drv->remove)
-		drv->remove(of_dev);
-	return 0;
-}
-
-static int of_device_suspend(struct device *dev, pm_message_t state)
-{
-	struct of_device * of_dev = to_of_device(dev);
-	struct of_platform_driver * drv = to_of_platform_driver(dev->driver);
-	int error = 0;
-
-	if (dev->driver && drv->suspend)
-		error = drv->suspend(of_dev, state);
-	return error;
-}
-
-static int of_device_resume(struct device * dev)
-{
-	struct of_device * of_dev = to_of_device(dev);
-	struct of_platform_driver * drv = to_of_platform_driver(dev->driver);
-	int error = 0;
-
-	if (dev->driver && drv->resume)
-		error = drv->resume(of_dev);
-	return error;
-}
-
-struct bus_type of_platform_bus_type = {
-       .name	= "of_platform",
-       .match	= of_platform_bus_match,
-       .suspend	= of_device_suspend,
-       .resume	= of_device_resume,
-};
-
-static int __init of_bus_driver_init(void)
-{
-	return bus_register(&of_platform_bus_type);
-}
-
-postcore_initcall(of_bus_driver_init);
-
-int of_register_driver(struct of_platform_driver *drv)
-{
-	int count = 0;
-
-	/* initialize common driver fields */
-	drv->driver.name = drv->name;
-	drv->driver.bus = &of_platform_bus_type;
-	drv->driver.probe = of_device_probe;
-	drv->driver.remove = of_device_remove;
-
-	/* register with core */
-	count = driver_register(&drv->driver);
-	return count ? count : 1;
-}
-
-void of_unregister_driver(struct of_platform_driver *drv)
-{
-	driver_unregister(&drv->driver);
-}
-
-
-static ssize_t dev_show_devspec(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct of_device *ofdev;
-
-	ofdev = to_of_device(dev);
-	return sprintf(buf, "%s", ofdev->node->full_name);
-}
-
-static DEVICE_ATTR(devspec, S_IRUGO, dev_show_devspec, NULL);
-
-/**
- * of_release_dev - free an of device structure when all users of it are finished.
- * @dev: device that's been disconnected
- *
- * Will be called only by the device core when all users of this of device are
- * done.
- */
-void of_release_dev(struct device *dev)
-{
-	struct of_device *ofdev;
-
-        ofdev = to_of_device(dev);
-	of_node_put(ofdev->node);
-	kfree(ofdev);
-}
-
-int of_device_register(struct of_device *ofdev)
-{
-	int rc;
-	struct of_device **odprop;
-
-	BUG_ON(ofdev->node == NULL);
-
-	odprop = (struct of_device **)get_property(ofdev->node, "linux,device", NULL);
-	if (!odprop) {
-		struct property *new_prop;
-	
-		new_prop = kmalloc(sizeof(struct property) + sizeof(struct of_device *),
-			GFP_KERNEL);
-		if (new_prop == NULL)
-			return -ENOMEM;
-		new_prop->name = "linux,device";
-		new_prop->length = sizeof(sizeof(struct of_device *));
-		new_prop->value = (unsigned char *)&new_prop[1];
-		odprop = (struct of_device **)new_prop->value;
-		*odprop = NULL;
-		prom_add_property(ofdev->node, new_prop);
-	}
-	*odprop = ofdev;
-
-	rc = device_register(&ofdev->dev);
-	if (rc)
-		return rc;
-
-	device_create_file(&ofdev->dev, &dev_attr_devspec);
-
-	return 0;
-}
-
-void of_device_unregister(struct of_device *ofdev)
-{
-	struct of_device **odprop;
-
-	device_remove_file(&ofdev->dev, &dev_attr_devspec);
-
-	odprop = (struct of_device **)get_property(ofdev->node, "linux,device", NULL);
-	if (odprop)
-		*odprop = NULL;
-
-	device_unregister(&ofdev->dev);
-}
-
-struct of_device* of_platform_device_create(struct device_node *np, const char *bus_id)
-{
-	struct of_device *dev;
-	u32 *reg;
-
-	dev = kmalloc(sizeof(*dev), GFP_KERNEL);
-	if (!dev)
-		return NULL;
-	memset(dev, 0, sizeof(*dev));
-
-	dev->node = of_node_get(np);
-	dev->dma_mask = 0xffffffffUL;
-	dev->dev.dma_mask = &dev->dma_mask;
-	dev->dev.parent = NULL;
-	dev->dev.bus = &of_platform_bus_type;
-	dev->dev.release = of_release_dev;
-
-	reg = (u32 *)get_property(np, "reg", NULL);
-	strlcpy(dev->dev.bus_id, bus_id, BUS_ID_SIZE);
-
-	if (of_device_register(dev) != 0) {
-		kfree(dev);
-		return NULL;
-	}
-
-	return dev;
-}
-
-EXPORT_SYMBOL(of_match_device);
-EXPORT_SYMBOL(of_platform_bus_type);
-EXPORT_SYMBOL(of_register_driver);
-EXPORT_SYMBOL(of_unregister_driver);
-EXPORT_SYMBOL(of_device_register);
-EXPORT_SYMBOL(of_device_unregister);
-EXPORT_SYMBOL(of_dev_get);
-EXPORT_SYMBOL(of_dev_put);
-EXPORT_SYMBOL(of_platform_device_create);
-EXPORT_SYMBOL(of_release_dev);
diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c
index 53da58523e39..894779712b46 100644
--- a/arch/ppc/syslib/open_pic.c
+++ b/arch/ppc/syslib/open_pic.c
@@ -13,7 +13,6 @@
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/init.h>
-#include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/sysdev.h>
 #include <linux/errno.h>
@@ -24,6 +23,7 @@
 #include <asm/sections.h>
 #include <asm/open_pic.h>
 #include <asm/i8259.h>
+#include <asm/machdep.h>
 
 #include "open_pic_defs.h"
 
@@ -890,7 +890,7 @@ openpic_get_irq(struct pt_regs *regs)
 
 #ifdef CONFIG_SMP
 void
-smp_openpic_message_pass(int target, int msg, unsigned long data, int wait)
+smp_openpic_message_pass(int target, int msg)
 {
 	cpumask_t mask = CPU_MASK_ALL;
 	/* make sure we're sending something that translates to an IPI */
diff --git a/arch/ppc/syslib/open_pic2.c b/arch/ppc/syslib/open_pic2.c
index 9a7e8748e2b2..1c40049b9a45 100644
--- a/arch/ppc/syslib/open_pic2.c
+++ b/arch/ppc/syslib/open_pic2.c
@@ -17,7 +17,6 @@
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/init.h>
-#include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/sysdev.h>
 #include <linux/errno.h>
@@ -28,6 +27,7 @@
 #include <asm/sections.h>
 #include <asm/open_pic.h>
 #include <asm/i8259.h>
+#include <asm/machdep.h>
 
 #include "open_pic_defs.h"
 
diff --git a/arch/ppc/syslib/ppc403_pic.c b/arch/ppc/syslib/ppc403_pic.c
index ce4d1deb86e9..c46043c47225 100644
--- a/arch/ppc/syslib/ppc403_pic.c
+++ b/arch/ppc/syslib/ppc403_pic.c
@@ -26,6 +26,7 @@
 #include <asm/system.h>
 #include <asm/irq.h>
 #include <asm/ppc4xx_pic.h>
+#include <asm/machdep.h>
 
 /* Function Prototypes */
 
diff --git a/arch/ppc/syslib/ppc405_pci.c b/arch/ppc/syslib/ppc405_pci.c
index 81c83bf98df4..d6d838b16dac 100644
--- a/arch/ppc/syslib/ppc405_pci.c
+++ b/arch/ppc/syslib/ppc405_pci.c
@@ -89,13 +89,6 @@ ppc4xx_find_bridges(void)
 	isa_mem_base = 0;
 	pci_dram_offset = 0;
 
-#if  (PSR_PCI_ARBIT_EN > 1)
-	/* Check if running in slave mode */
-	if ((mfdcr(DCRN_CHPSR) & PSR_PCI_ARBIT_EN) == 0) {
-		printk("Running as PCI slave, kernel PCI disabled !\n");
-		return;
-	}
-#endif
 	/* Setup PCI32 hose */
 	hose_a = pcibios_alloc_controller();
 	if (!hose_a)
diff --git a/arch/ppc/syslib/ppc440spe_pcie.c b/arch/ppc/syslib/ppc440spe_pcie.c
new file mode 100644
index 000000000000..1509fc1ddfb6
--- /dev/null
+++ b/arch/ppc/syslib/ppc440spe_pcie.c
@@ -0,0 +1,442 @@
+/*
+ * Copyright (c) 2005 Cisco Systems.  All rights reserved.
+ * Roland Dreier <rolandd@cisco.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+
+#include <asm/reg.h>
+#include <asm/io.h>
+#include <asm/ibm44x.h>
+
+#include "ppc440spe_pcie.h"
+
+static int
+pcie_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		     int len, u32 *val)
+{
+	struct pci_controller *hose = bus->sysdata;
+
+	if (PCI_SLOT(devfn) != 1)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	offset += devfn << 12;
+
+	/*
+	 * Note: the caller has already checked that offset is
+	 * suitably aligned and that len is 1, 2 or 4.
+	 */
+	switch (len) {
+	case 1:
+		*val = in_8(hose->cfg_data + offset);
+		break;
+	case 2:
+		*val = in_le16(hose->cfg_data + offset);
+		break;
+	default:
+		*val = in_le32(hose->cfg_data + offset);
+		break;
+	}
+
+	if (0) printk("%s: read %x(%d) @ %x\n", __func__, *val, len, offset);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+pcie_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		      int len, u32 val)
+{
+	struct pci_controller *hose = bus->sysdata;
+
+	if (PCI_SLOT(devfn) != 1)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	offset += devfn << 12;
+
+	switch (len) {
+	case 1:
+		out_8(hose->cfg_data + offset, val);
+		break;
+	case 2:
+		out_le16(hose->cfg_data + offset, val);
+		break;
+	default:
+		out_le32(hose->cfg_data + offset, val);
+		break;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops pcie_pci_ops =
+{
+	.read  = pcie_read_config,
+	.write = pcie_write_config
+};
+
+enum {
+	PTYPE_ENDPOINT		= 0x0,
+	PTYPE_LEGACY_ENDPOINT	= 0x1,
+	PTYPE_ROOT_PORT		= 0x4,
+
+	LNKW_X1			= 0x1,
+	LNKW_X4			= 0x4,
+	LNKW_X8			= 0x8
+};
+
+static void check_error(void)
+{
+	u32 valPE0, valPE1, valPE2;
+
+	/* SDR0_PEGPLLLCT1 reset */
+	if (!(valPE0 = SDR_READ(PESDR0_PLLLCT1) & 0x01000000)) {
+		printk(KERN_INFO "PCIE: SDR0_PEGPLLLCT1 reset error 0x%8x\n", valPE0);
+	}
+
+	valPE0 = SDR_READ(PESDR0_RCSSET);
+	valPE1 = SDR_READ(PESDR1_RCSSET);
+	valPE2 = SDR_READ(PESDR2_RCSSET);
+
+	/* SDR0_PExRCSSET rstgu */
+	if ( !(valPE0 & 0x01000000) ||
+	     !(valPE1 & 0x01000000) ||
+	     !(valPE2 & 0x01000000)) {
+		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET rstgu error\n");
+	}
+
+	/* SDR0_PExRCSSET rstdl */
+	if ( !(valPE0 & 0x00010000) ||
+	     !(valPE1 & 0x00010000) ||
+	     !(valPE2 & 0x00010000)) {
+		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET rstdl error\n");
+	}
+
+	/* SDR0_PExRCSSET rstpyn */
+	if ( (valPE0 & 0x00001000) ||
+	     (valPE1 & 0x00001000) ||
+	     (valPE2 & 0x00001000)) {
+		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET rstpyn error\n");
+	}
+
+	/* SDR0_PExRCSSET hldplb */
+	if ( (valPE0 & 0x10000000) ||
+	     (valPE1 & 0x10000000) ||
+	     (valPE2 & 0x10000000)) {
+		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET hldplb error\n");
+	}
+
+	/* SDR0_PExRCSSET rdy */
+	if ( (valPE0 & 0x00100000) ||
+	     (valPE1 & 0x00100000) ||
+	     (valPE2 & 0x00100000)) {
+		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET rdy error\n");
+	}
+
+	/* SDR0_PExRCSSET shutdown */
+	if ( (valPE0 & 0x00000100) ||
+	     (valPE1 & 0x00000100) ||
+	     (valPE2 & 0x00000100)) {
+		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET shutdown error\n");
+	}
+}
+
+/*
+ * Initialize PCI Express core as described in User Manual section 27.12.1
+ */
+int ppc440spe_init_pcie(void)
+{
+	/* Set PLL clock receiver to LVPECL */
+	SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) | 1 << 28);
+
+	check_error();
+
+	printk(KERN_INFO "PCIE initialization OK\n");
+
+	if (!(SDR_READ(PESDR0_PLLLCT2) & 0x10000))
+		printk(KERN_INFO "PESDR_PLLCT2 resistance calibration failed (0x%08x)\n",
+		       SDR_READ(PESDR0_PLLLCT2));
+
+	/* De-assert reset of PCIe PLL, wait for lock */
+	SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) & ~(1 << 24));
+	udelay(3);
+
+	return 0;
+}
+
+int ppc440spe_init_pcie_rootport(int port)
+{
+	static int core_init;
+	void __iomem *utl_base;
+	u32 val = 0;
+	int i;
+
+	if (!core_init) {
+		++core_init;
+		i = ppc440spe_init_pcie();
+		if (i)
+			return i;
+	}
+
+	/*
+	 * Initialize various parts of the PCI Express core for our port:
+	 *
+	 * - Set as a root port and enable max width
+	 *   (PXIE0 -> X8, PCIE1 and PCIE2 -> X4).
+	 * - Set up UTL configuration.
+	 * - Increase SERDES drive strength to levels suggested by AMCC.
+	 * - De-assert RSTPYN, RSTDL and RSTGU.
+	 */
+	switch (port) {
+	case 0:
+		SDR_WRITE(PESDR0_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X8 << 12);
+
+		SDR_WRITE(PESDR0_UTLSET1, 0x21222222);
+		SDR_WRITE(PESDR0_UTLSET2, 0x11000000);
+
+		SDR_WRITE(PESDR0_HSSL0SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL1SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL2SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL3SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL4SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL5SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000);
+
+		SDR_WRITE(PESDR0_RCSSET,
+			  (SDR_READ(PESDR0_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
+		break;
+
+	case 1:
+		SDR_WRITE(PESDR1_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X4 << 12);
+
+		SDR_WRITE(PESDR1_UTLSET1, 0x21222222);
+		SDR_WRITE(PESDR1_UTLSET2, 0x11000000);
+
+		SDR_WRITE(PESDR1_HSSL0SET1, 0x35000000);
+		SDR_WRITE(PESDR1_HSSL1SET1, 0x35000000);
+		SDR_WRITE(PESDR1_HSSL2SET1, 0x35000000);
+		SDR_WRITE(PESDR1_HSSL3SET1, 0x35000000);
+
+		SDR_WRITE(PESDR1_RCSSET,
+			  (SDR_READ(PESDR1_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
+		break;
+
+	case 2:
+		SDR_WRITE(PESDR2_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X4 << 12);
+
+		SDR_WRITE(PESDR2_UTLSET1, 0x21222222);
+		SDR_WRITE(PESDR2_UTLSET2, 0x11000000);
+
+		SDR_WRITE(PESDR2_HSSL0SET1, 0x35000000);
+		SDR_WRITE(PESDR2_HSSL1SET1, 0x35000000);
+		SDR_WRITE(PESDR2_HSSL2SET1, 0x35000000);
+		SDR_WRITE(PESDR2_HSSL3SET1, 0x35000000);
+
+		SDR_WRITE(PESDR2_RCSSET,
+			  (SDR_READ(PESDR2_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
+		break;
+	}
+
+	mdelay(1000);
+
+	switch (port) {
+	case 0: val = SDR_READ(PESDR0_RCSSTS); break;
+	case 1: val = SDR_READ(PESDR1_RCSSTS); break;
+	case 2: val = SDR_READ(PESDR2_RCSSTS); break;
+	}
+
+	if (!(val & (1 << 20)))
+		printk(KERN_INFO "PCIE%d: PGRST inactive\n", port);
+	else
+		printk(KERN_WARNING "PGRST for PCIE%d failed %08x\n", port, val);
+
+	switch (port) {
+	case 0: printk(KERN_INFO "PCIE0: LOOP %08x\n", SDR_READ(PESDR0_LOOP)); break;
+	case 1: printk(KERN_INFO "PCIE1: LOOP %08x\n", SDR_READ(PESDR1_LOOP)); break;
+	case 2: printk(KERN_INFO "PCIE2: LOOP %08x\n", SDR_READ(PESDR2_LOOP)); break;
+	}
+
+	/*
+	 * Map UTL registers at 0xc_1000_0n00
+	 */
+	switch (port) {
+	case 0:
+		mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x0000000c);
+		mtdcr(DCRN_PEGPL_REGBAL(PCIE0), 0x10000000);
+		mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001);
+		mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0x68782800);
+		break;
+
+	case 1:
+		mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x0000000c);
+		mtdcr(DCRN_PEGPL_REGBAL(PCIE1), 0x10001000);
+		mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001);
+		mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0x68782800);
+		break;
+
+	case 2:
+		mtdcr(DCRN_PEGPL_REGBAH(PCIE2), 0x0000000c);
+		mtdcr(DCRN_PEGPL_REGBAL(PCIE2), 0x10002000);
+		mtdcr(DCRN_PEGPL_REGMSK(PCIE2), 0x00007001);
+		mtdcr(DCRN_PEGPL_SPECIAL(PCIE2), 0x68782800);
+	}
+
+	utl_base = ioremap64(0xc10000000ull + 0x1000 * port, 0x100);
+
+	/*
+	 * Set buffer allocations and then assert VRB and TXE.
+	 */
+	out_be32(utl_base + PEUTL_OUTTR,   0x08000000);
+	out_be32(utl_base + PEUTL_INTR,    0x02000000);
+	out_be32(utl_base + PEUTL_OPDBSZ,  0x10000000);
+	out_be32(utl_base + PEUTL_PBBSZ,   0x53000000);
+	out_be32(utl_base + PEUTL_IPHBSZ,  0x08000000);
+	out_be32(utl_base + PEUTL_IPDBSZ,  0x10000000);
+	out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000);
+	out_be32(utl_base + PEUTL_PCTL,    0x80800066);
+
+	iounmap(utl_base);
+
+	/*
+	 * We map PCI Express configuration access into the 512MB regions
+	 *     PCIE0: 0xc_4000_0000
+	 *     PCIE1: 0xc_8000_0000
+	 *     PCIE2: 0xc_c000_0000
+	 */
+	switch (port) {
+	case 0:
+		mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), 0x0000000c);
+		mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), 0x40000000);
+		mtdcr(DCRN_PEGPL_CFGMSK(PCIE0), 0xe0000001); /* 512MB region, valid */
+		break;
+
+	case 1:
+		mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), 0x0000000c);
+		mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), 0x80000000);
+		mtdcr(DCRN_PEGPL_CFGMSK(PCIE1), 0xe0000001); /* 512MB region, valid */
+		break;
+
+	case 2:
+		mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), 0x0000000c);
+		mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), 0xc0000000);
+		mtdcr(DCRN_PEGPL_CFGMSK(PCIE2), 0xe0000001); /* 512MB region, valid */
+		break;
+	}
+
+	/*
+	 * Check for VC0 active and assert RDY.
+	 */
+	switch (port) {
+	case 0:
+		if (!(SDR_READ(PESDR0_RCSSTS) & (1 << 16)))
+			printk(KERN_WARNING "PCIE0: VC0 not active\n");
+		SDR_WRITE(PESDR0_RCSSET, SDR_READ(PESDR0_RCSSET) | 1 << 20);
+		break;
+	case 1:
+		if (!(SDR_READ(PESDR1_RCSSTS) & (1 << 16)))
+			printk(KERN_WARNING "PCIE0: VC0 not active\n");
+		SDR_WRITE(PESDR1_RCSSET, SDR_READ(PESDR1_RCSSET) | 1 << 20);
+		break;
+	case 2:
+		if (!(SDR_READ(PESDR2_RCSSTS) & (1 << 16)))
+			printk(KERN_WARNING "PCIE0: VC0 not active\n");
+		SDR_WRITE(PESDR2_RCSSET, SDR_READ(PESDR2_RCSSET) | 1 << 20);
+		break;
+	}
+
+#if 0
+	/* Dump all config regs */
+	for (i = 0x300; i <= 0x320; ++i)
+		printk("[%04x] 0x%08x\n", i, SDR_READ(i));
+	for (i = 0x340; i <= 0x353; ++i)
+		printk("[%04x] 0x%08x\n", i, SDR_READ(i));
+	for (i = 0x370; i <= 0x383; ++i)
+		printk("[%04x] 0x%08x\n", i, SDR_READ(i));
+	for (i = 0x3a0; i <= 0x3a2; ++i)
+		printk("[%04x] 0x%08x\n", i, SDR_READ(i));
+	for (i = 0x3c0; i <= 0x3c3; ++i)
+		printk("[%04x] 0x%08x\n", i, SDR_READ(i));
+#endif
+
+	mdelay(100);
+
+	return 0;
+}
+
+void ppc440spe_setup_pcie(struct pci_controller *hose, int port)
+{
+	void __iomem *mbase;
+
+	/*
+	 * Map 16MB, which is enough for 4 bits of bus #
+	 */
+	hose->cfg_data = ioremap64(0xc40000000ull + port * 0x40000000,
+				   1 << 24);
+	hose->ops = &pcie_pci_ops;
+
+	/*
+	 * Set bus numbers on our root port
+	 */
+	mbase = ioremap64(0xc50000000ull + port * 0x40000000, 4096);
+	out_8(mbase + PCI_PRIMARY_BUS, 0);
+	out_8(mbase + PCI_SECONDARY_BUS, 0);
+
+	/*
+	 * Set up outbound translation to hose->mem_space from PLB
+	 * addresses at an offset of 0xd_0000_0000.  We set the low
+	 * bits of the mask to 11 to turn off splitting into 8
+	 * subregions and to enable the outbound translation.
+	 */
+	out_le32(mbase + PECFG_POM0LAH, 0);
+	out_le32(mbase + PECFG_POM0LAL, hose->mem_space.start);
+
+	switch (port) {
+	case 0:
+		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0),  0x0000000d);
+		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0),  hose->mem_space.start);
+		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
+		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
+		      ~(hose->mem_space.end - hose->mem_space.start) | 3);
+		break;
+	case 1:
+		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1),  0x0000000d);
+		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1),  hose->mem_space.start);
+		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
+		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
+		      ~(hose->mem_space.end - hose->mem_space.start) | 3);
+
+		break;
+	case 2:
+		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2),  0x0000000d);
+		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2),  hose->mem_space.start);
+		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
+		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
+		      ~(hose->mem_space.end - hose->mem_space.start) | 3);
+		break;
+	}
+
+	/* Set up 16GB inbound memory window at 0 */
+	out_le32(mbase + PCI_BASE_ADDRESS_0, 0);
+	out_le32(mbase + PCI_BASE_ADDRESS_1, 0);
+	out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffc);
+	out_le32(mbase + PECFG_BAR0LMPA, 0);
+	out_le32(mbase + PECFG_PIM0LAL, 0);
+	out_le32(mbase + PECFG_PIM0LAH, 0);
+	out_le32(mbase + PECFG_PIMEN, 0x1);
+
+	/* Enable I/O, Mem, and Busmaster cycles */
+	out_le16(mbase + PCI_COMMAND,
+		 in_le16(mbase + PCI_COMMAND) |
+		 PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+
+	iounmap(mbase);
+}
diff --git a/arch/ppc/syslib/ppc440spe_pcie.h b/arch/ppc/syslib/ppc440spe_pcie.h
new file mode 100644
index 000000000000..55b765ad3272
--- /dev/null
+++ b/arch/ppc/syslib/ppc440spe_pcie.h
@@ -0,0 +1,149 @@
+/*
+ * Copyright (c) 2005 Cisco Systems.  All rights reserved.
+ * Roland Dreier <rolandd@cisco.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PPC_SYSLIB_PPC440SPE_PCIE_H
+#define __PPC_SYSLIB_PPC440SPE_PCIE_H
+
+#define DCRN_SDR0_CFGADDR	0x00e
+#define DCRN_SDR0_CFGDATA	0x00f
+
+#define DCRN_PCIE0_BASE		0x100
+#define DCRN_PCIE1_BASE		0x120
+#define DCRN_PCIE2_BASE		0x140
+#define PCIE0			DCRN_PCIE0_BASE
+#define PCIE1			DCRN_PCIE1_BASE
+#define PCIE2			DCRN_PCIE2_BASE
+
+#define DCRN_PEGPL_CFGBAH(base)		(base + 0x00)
+#define DCRN_PEGPL_CFGBAL(base)		(base + 0x01)
+#define DCRN_PEGPL_CFGMSK(base)		(base + 0x02)
+#define DCRN_PEGPL_MSGBAH(base)		(base + 0x03)
+#define DCRN_PEGPL_MSGBAL(base)		(base + 0x04)
+#define DCRN_PEGPL_MSGMSK(base)		(base + 0x05)
+#define DCRN_PEGPL_OMR1BAH(base)	(base + 0x06)
+#define DCRN_PEGPL_OMR1BAL(base)	(base + 0x07)
+#define DCRN_PEGPL_OMR1MSKH(base)	(base + 0x08)
+#define DCRN_PEGPL_OMR1MSKL(base)	(base + 0x09)
+#define DCRN_PEGPL_REGBAH(base)		(base + 0x12)
+#define DCRN_PEGPL_REGBAL(base)		(base + 0x13)
+#define DCRN_PEGPL_REGMSK(base)		(base + 0x14)
+#define DCRN_PEGPL_SPECIAL(base)	(base + 0x15)
+
+/*
+ * System DCRs (SDRs)
+ */
+#define PESDR0_PLLLCT1		0x03a0
+#define PESDR0_PLLLCT2		0x03a1
+#define PESDR0_PLLLCT3		0x03a2
+
+#define PESDR0_UTLSET1		0x0300
+#define PESDR0_UTLSET2		0x0301
+#define PESDR0_DLPSET		0x0302
+#define PESDR0_LOOP		0x0303
+#define PESDR0_RCSSET		0x0304
+#define PESDR0_RCSSTS		0x0305
+#define PESDR0_HSSL0SET1	0x0306
+#define PESDR0_HSSL0SET2	0x0307
+#define PESDR0_HSSL0STS		0x0308
+#define PESDR0_HSSL1SET1	0x0309
+#define PESDR0_HSSL1SET2	0x030a
+#define PESDR0_HSSL1STS		0x030b
+#define PESDR0_HSSL2SET1	0x030c
+#define PESDR0_HSSL2SET2	0x030d
+#define PESDR0_HSSL2STS		0x030e
+#define PESDR0_HSSL3SET1	0x030f
+#define PESDR0_HSSL3SET2	0x0310
+#define PESDR0_HSSL3STS		0x0311
+#define PESDR0_HSSL4SET1	0x0312
+#define PESDR0_HSSL4SET2	0x0313
+#define PESDR0_HSSL4STS		0x0314
+#define PESDR0_HSSL5SET1	0x0315
+#define PESDR0_HSSL5SET2	0x0316
+#define PESDR0_HSSL5STS		0x0317
+#define PESDR0_HSSL6SET1	0x0318
+#define PESDR0_HSSL6SET2	0x0319
+#define PESDR0_HSSL6STS		0x031a
+#define PESDR0_HSSL7SET1	0x031b
+#define PESDR0_HSSL7SET2	0x031c
+#define PESDR0_HSSL7STS		0x031d
+#define PESDR0_HSSCTLSET	0x031e
+#define PESDR0_LANE_ABCD	0x031f
+#define PESDR0_LANE_EFGH	0x0320
+
+#define PESDR1_UTLSET1		0x0340
+#define PESDR1_UTLSET2		0x0341
+#define PESDR1_DLPSET		0x0342
+#define PESDR1_LOOP		0x0343
+#define PESDR1_RCSSET		0x0344
+#define PESDR1_RCSSTS		0x0345
+#define PESDR1_HSSL0SET1	0x0346
+#define PESDR1_HSSL0SET2	0x0347
+#define PESDR1_HSSL0STS		0x0348
+#define PESDR1_HSSL1SET1	0x0349
+#define PESDR1_HSSL1SET2	0x034a
+#define PESDR1_HSSL1STS		0x034b
+#define PESDR1_HSSL2SET1	0x034c
+#define PESDR1_HSSL2SET2	0x034d
+#define PESDR1_HSSL2STS		0x034e
+#define PESDR1_HSSL3SET1	0x034f
+#define PESDR1_HSSL3SET2	0x0350
+#define PESDR1_HSSL3STS		0x0351
+#define PESDR1_HSSCTLSET	0x0352
+#define PESDR1_LANE_ABCD	0x0353
+
+#define PESDR2_UTLSET1		0x0370
+#define PESDR2_UTLSET2		0x0371
+#define PESDR2_DLPSET		0x0372
+#define PESDR2_LOOP		0x0373
+#define PESDR2_RCSSET		0x0374
+#define PESDR2_RCSSTS		0x0375
+#define PESDR2_HSSL0SET1	0x0376
+#define PESDR2_HSSL0SET2	0x0377
+#define PESDR2_HSSL0STS		0x0378
+#define PESDR2_HSSL1SET1	0x0379
+#define PESDR2_HSSL1SET2	0x037a
+#define PESDR2_HSSL1STS		0x037b
+#define PESDR2_HSSL2SET1	0x037c
+#define PESDR2_HSSL2SET2	0x037d
+#define PESDR2_HSSL2STS		0x037e
+#define PESDR2_HSSL3SET1	0x037f
+#define PESDR2_HSSL3SET2	0x0380
+#define PESDR2_HSSL3STS		0x0381
+#define PESDR2_HSSCTLSET	0x0382
+#define PESDR2_LANE_ABCD	0x0383
+
+/*
+ * UTL register offsets
+ */
+#define PEUTL_PBBSZ		0x20
+#define PEUTL_OPDBSZ		0x68
+#define PEUTL_IPHBSZ		0x70
+#define PEUTL_IPDBSZ		0x78
+#define PEUTL_OUTTR		0x90
+#define PEUTL_INTR		0x98
+#define PEUTL_PCTL		0xa0
+#define PEUTL_RCIRQEN		0xb8
+
+/*
+ * Config space register offsets
+ */
+#define PECFG_BAR0LMPA		0x210
+#define PECFG_BAR0HMPA		0x214
+#define PECFG_PIMEN		0x33c
+#define PECFG_PIM0LAL		0x340
+#define PECFG_PIM0LAH		0x344
+#define PECFG_POM0LAL		0x380
+#define PECFG_POM0LAH		0x384
+
+int ppc440spe_init_pcie(void);
+int ppc440spe_init_pcie_rootport(int port);
+void ppc440spe_setup_pcie(struct pci_controller *hose, int port);
+
+#endif /* __PPC_SYSLIB_PPC440SPE_PCIE_H */
diff --git a/arch/ppc/syslib/ppc4xx_pic.c b/arch/ppc/syslib/ppc4xx_pic.c
index 40086212b9c3..aa4165144ec2 100644
--- a/arch/ppc/syslib/ppc4xx_pic.c
+++ b/arch/ppc/syslib/ppc4xx_pic.c
@@ -25,6 +25,7 @@
 #include <asm/system.h>
 #include <asm/irq.h>
 #include <asm/ppc4xx_pic.h>
+#include <asm/machdep.h>
 
 /* See comment in include/arch-ppc/ppc4xx_pic.h
  * for more info about these two variables
@@ -37,6 +38,7 @@ extern unsigned char ppc4xx_uic_ext_irq_cfg[] __attribute__ ((weak));
 #define IRQ_MASK_UICx(irq)		(1 << (31 - ((irq) & 0x1f)))
 #define IRQ_MASK_UIC1(irq)		IRQ_MASK_UICx(irq)
 #define IRQ_MASK_UIC2(irq)		IRQ_MASK_UICx(irq)
+#define IRQ_MASK_UIC3(irq)		IRQ_MASK_UICx(irq)
 
 #define UIC_HANDLERS(n)							\
 static void ppc4xx_uic##n##_enable(unsigned int irq)			\
@@ -87,7 +89,38 @@ static void ppc4xx_uic##n##_end(unsigned int irq)			\
 	.end 		= ppc4xx_uic##n##_end,				\
 }									\
 
-#if NR_UICS == 3
+#if NR_UICS == 4
+#define ACK_UIC0_PARENT
+#define ACK_UIC1_PARENT	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC);
+#define ACK_UIC2_PARENT	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC2NC);
+#define ACK_UIC3_PARENT	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC3NC);
+UIC_HANDLERS(0);
+UIC_HANDLERS(1);
+UIC_HANDLERS(2);
+UIC_HANDLERS(3);
+
+static int ppc4xx_pic_get_irq(struct pt_regs *regs)
+{
+	u32 uic0 = mfdcr(DCRN_UIC_MSR(UIC0));
+	if (uic0 & UIC0_UIC1NC)
+		return 64 - ffs(mfdcr(DCRN_UIC_MSR(UIC1)));
+	else if (uic0 & UIC0_UIC2NC)
+		return 96 - ffs(mfdcr(DCRN_UIC_MSR(UIC2)));
+	else if (uic0 & UIC0_UIC3NC)
+		return 128 - ffs(mfdcr(DCRN_UIC_MSR(UIC3)));
+	else
+		return uic0 ? 32 - ffs(uic0) : -1;
+}
+
+static void __init ppc4xx_pic_impl_init(void)
+{
+	/* Enable cascade interrupts in UIC0 */
+	ppc_cached_irq_mask[0] |= UIC0_UIC1NC | UIC0_UIC2NC | UIC0_UIC3NC;
+	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC | UIC0_UIC2NC | UIC0_UIC3NC);
+	mtdcr(DCRN_UIC_ER(UIC0), ppc_cached_irq_mask[0]);
+}
+
+#elif NR_UICS == 3
 #define ACK_UIC0_PARENT	mtdcr(DCRN_UIC_SR(UICB), UICB_UIC0NC);
 #define ACK_UIC1_PARENT	mtdcr(DCRN_UIC_SR(UICB), UICB_UIC1NC);
 #define ACK_UIC2_PARENT	mtdcr(DCRN_UIC_SR(UICB), UICB_UIC2NC);
@@ -169,6 +202,9 @@ static struct ppc4xx_uic_impl {
 	{ .decl = DECLARE_UIC(1), .base = UIC1 },
 #if NR_UICS > 2
 	{ .decl = DECLARE_UIC(2), .base = UIC2 },
+#if NR_UICS > 3
+	{ .decl = DECLARE_UIC(3), .base = UIC3 },
+#endif
 #endif
 #endif
 };
diff --git a/arch/ppc/syslib/ppc4xx_setup.c b/arch/ppc/syslib/ppc4xx_setup.c
index b843c4fef25e..e83a83fd95e1 100644
--- a/arch/ppc/syslib/ppc4xx_setup.c
+++ b/arch/ppc/syslib/ppc4xx_setup.c
@@ -18,7 +18,6 @@
 #include <linux/smp.h>
 #include <linux/threads.h>
 #include <linux/spinlock.h>
-#include <linux/irq.h>
 #include <linux/reboot.h>
 #include <linux/param.h>
 #include <linux/string.h>
@@ -279,7 +278,7 @@ ppc4xx_init(unsigned long r3, unsigned long r4, unsigned long r5,
 #endif /* defined(CONFIG_PCI) && defined(CONFIG_IDE) */
 }
 
-/* Called from MachineCheckException */
+/* Called from machine_check_exception */
 void platform_machine_check(struct pt_regs *regs)
 {
 #if defined(DCRN_PLB0_BEAR)
diff --git a/arch/ppc/syslib/ppc83xx_setup.c b/arch/ppc/syslib/ppc83xx_setup.c
index 890484e576e7..1b5fe9e398d4 100644
--- a/arch/ppc/syslib/ppc83xx_setup.c
+++ b/arch/ppc/syslib/ppc83xx_setup.c
@@ -3,7 +3,7 @@
  *
  * MPC83XX common board code
  *
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
  *
  * Copyright 2005 Freescale Semiconductor Inc.
  *
@@ -40,6 +40,7 @@
 #include <asm/ppc_sys.h>
 #include <asm/kgdb.h>
 #include <asm/delay.h>
+#include <asm/machdep.h>
 
 #include <syslib/ppc83xx_setup.h>
 #if defined(CONFIG_PCI)
diff --git a/arch/ppc/syslib/ppc83xx_setup.h b/arch/ppc/syslib/ppc83xx_setup.h
index c766c1a5f786..a122a7322e5e 100644
--- a/arch/ppc/syslib/ppc83xx_setup.h
+++ b/arch/ppc/syslib/ppc83xx_setup.h
@@ -3,7 +3,7 @@
  *
  * MPC83XX common board definitions
  *
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
  *
  * Copyright 2005 Freescale Semiconductor Inc.
  *
diff --git a/arch/ppc/syslib/ppc85xx_common.c b/arch/ppc/syslib/ppc85xx_common.c
index da841dacdc13..19ad537225e4 100644
--- a/arch/ppc/syslib/ppc85xx_common.c
+++ b/arch/ppc/syslib/ppc85xx_common.c
@@ -3,7 +3,7 @@
  *
  * MPC85xx support routines
  *
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
  *
  * Copyright 2004 Freescale Semiconductor Inc.
  *
diff --git a/arch/ppc/syslib/ppc85xx_common.h b/arch/ppc/syslib/ppc85xx_common.h
index 2c8f304441bf..94edf32151dd 100644
--- a/arch/ppc/syslib/ppc85xx_common.h
+++ b/arch/ppc/syslib/ppc85xx_common.h
@@ -3,7 +3,7 @@
  *
  * MPC85xx support routines
  *
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
  *
  * Copyright 2004 Freescale Semiconductor Inc.
  *
diff --git a/arch/ppc/syslib/ppc85xx_rio.c b/arch/ppc/syslib/ppc85xx_rio.c
new file mode 100644
index 000000000000..297f3b549177
--- /dev/null
+++ b/arch/ppc/syslib/ppc85xx_rio.c
@@ -0,0 +1,938 @@
+/*
+ * MPC85xx RapidIO support
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+
+#include <asm/io.h>
+
+#define RIO_REGS_BASE		(CCSRBAR + 0xc0000)
+#define RIO_ATMU_REGS_OFFSET	0x10c00
+#define RIO_MSG_REGS_OFFSET	0x11000
+#define RIO_MAINT_WIN_SIZE	0x400000
+#define RIO_DBELL_WIN_SIZE	0x1000
+
+#define RIO_MSG_OMR_MUI		0x00000002
+#define RIO_MSG_OSR_TE		0x00000080
+#define RIO_MSG_OSR_QOI		0x00000020
+#define RIO_MSG_OSR_QFI		0x00000010
+#define RIO_MSG_OSR_MUB		0x00000004
+#define RIO_MSG_OSR_EOMI	0x00000002
+#define RIO_MSG_OSR_QEI		0x00000001
+
+#define RIO_MSG_IMR_MI		0x00000002
+#define RIO_MSG_ISR_TE		0x00000080
+#define RIO_MSG_ISR_QFI		0x00000010
+#define RIO_MSG_ISR_DIQI	0x00000001
+
+#define RIO_MSG_DESC_SIZE	32
+#define RIO_MSG_BUFFER_SIZE	4096
+#define RIO_MIN_TX_RING_SIZE	2
+#define RIO_MAX_TX_RING_SIZE	2048
+#define RIO_MIN_RX_RING_SIZE	2
+#define RIO_MAX_RX_RING_SIZE	2048
+
+#define DOORBELL_DMR_DI		0x00000002
+#define DOORBELL_DSR_TE		0x00000080
+#define DOORBELL_DSR_QFI	0x00000010
+#define DOORBELL_DSR_DIQI	0x00000001
+#define DOORBELL_TID_OFFSET	0x03
+#define DOORBELL_SID_OFFSET	0x05
+#define DOORBELL_INFO_OFFSET	0x06
+
+#define DOORBELL_MESSAGE_SIZE	0x08
+#define DBELL_SID(x)		(*(u8 *)(x + DOORBELL_SID_OFFSET))
+#define DBELL_TID(x)		(*(u8 *)(x + DOORBELL_TID_OFFSET))
+#define DBELL_INF(x)		(*(u16 *)(x + DOORBELL_INFO_OFFSET))
+
+#define is_power_of_2(x)	(((x) & ((x) - 1)) == 0)
+
+struct rio_atmu_regs {
+	u32 rowtar;
+	u32 pad1;
+	u32 rowbar;
+	u32 pad2;
+	u32 rowar;
+	u32 pad3[3];
+};
+
+struct rio_msg_regs {
+	u32 omr;
+	u32 osr;
+	u32 pad1;
+	u32 odqdpar;
+	u32 pad2;
+	u32 osar;
+	u32 odpr;
+	u32 odatr;
+	u32 odcr;
+	u32 pad3;
+	u32 odqepar;
+	u32 pad4[13];
+	u32 imr;
+	u32 isr;
+	u32 pad5;
+	u32 ifqdpar;
+	u32 pad6;
+	u32 ifqepar;
+	u32 pad7[250];
+	u32 dmr;
+	u32 dsr;
+	u32 pad8;
+	u32 dqdpar;
+	u32 pad9;
+	u32 dqepar;
+	u32 pad10[26];
+	u32 pwmr;
+	u32 pwsr;
+	u32 pad11;
+	u32 pwqbar;
+};
+
+struct rio_tx_desc {
+	u32 res1;
+	u32 saddr;
+	u32 dport;
+	u32 dattr;
+	u32 res2;
+	u32 res3;
+	u32 dwcnt;
+	u32 res4;
+};
+
+static u32 regs_win;
+static struct rio_atmu_regs *atmu_regs;
+static struct rio_atmu_regs *maint_atmu_regs;
+static struct rio_atmu_regs *dbell_atmu_regs;
+static u32 dbell_win;
+static u32 maint_win;
+static struct rio_msg_regs *msg_regs;
+
+static struct rio_dbell_ring {
+	void *virt;
+	dma_addr_t phys;
+} dbell_ring;
+
+static struct rio_msg_tx_ring {
+	void *virt;
+	dma_addr_t phys;
+	void *virt_buffer[RIO_MAX_TX_RING_SIZE];
+	dma_addr_t phys_buffer[RIO_MAX_TX_RING_SIZE];
+	int tx_slot;
+	int size;
+	void *dev_id;
+} msg_tx_ring;
+
+static struct rio_msg_rx_ring {
+	void *virt;
+	dma_addr_t phys;
+	void *virt_buffer[RIO_MAX_RX_RING_SIZE];
+	int rx_slot;
+	int size;
+	void *dev_id;
+} msg_rx_ring;
+
+/**
+ * mpc85xx_rio_doorbell_send - Send a MPC85xx doorbell message
+ * @index: ID of RapidIO interface
+ * @destid: Destination ID of target device
+ * @data: 16-bit info field of RapidIO doorbell message
+ *
+ * Sends a MPC85xx doorbell message. Returns %0 on success or
+ * %-EINVAL on failure.
+ */
+static int mpc85xx_rio_doorbell_send(int index, u16 destid, u16 data)
+{
+	pr_debug("mpc85xx_doorbell_send: index %d destid %4.4x data %4.4x\n",
+		 index, destid, data);
+	out_be32((void *)&dbell_atmu_regs->rowtar, destid << 22);
+	out_be16((void *)(dbell_win), data);
+
+	return 0;
+}
+
+/**
+ * mpc85xx_local_config_read - Generate a MPC85xx local config space read
+ * @index: ID of RapdiIO interface
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @data: Value to be read into
+ *
+ * Generates a MPC85xx local configuration space read. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int mpc85xx_local_config_read(int index, u32 offset, int len, u32 * data)
+{
+	pr_debug("mpc85xx_local_config_read: index %d offset %8.8x\n", index,
+		 offset);
+	*data = in_be32((void *)(regs_win + offset));
+
+	return 0;
+}
+
+/**
+ * mpc85xx_local_config_write - Generate a MPC85xx local config space write
+ * @index: ID of RapdiIO interface
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @data: Value to be written
+ *
+ * Generates a MPC85xx local configuration space write. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int mpc85xx_local_config_write(int index, u32 offset, int len, u32 data)
+{
+	pr_debug
+	    ("mpc85xx_local_config_write: index %d offset %8.8x data %8.8x\n",
+	     index, offset, data);
+	out_be32((void *)(regs_win + offset), data);
+
+	return 0;
+}
+
+/**
+ * mpc85xx_rio_config_read - Generate a MPC85xx read maintenance transaction
+ * @index: ID of RapdiIO interface
+ * @destid: Destination ID of transaction
+ * @hopcount: Number of hops to target device
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @val: Location to be read into
+ *
+ * Generates a MPC85xx read maintenance transaction. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int
+mpc85xx_rio_config_read(int index, u16 destid, u8 hopcount, u32 offset, int len,
+			u32 * val)
+{
+	u8 *data;
+
+	pr_debug
+	    ("mpc85xx_rio_config_read: index %d destid %d hopcount %d offset %8.8x len %d\n",
+	     index, destid, hopcount, offset, len);
+	out_be32((void *)&maint_atmu_regs->rowtar,
+		 (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9));
+
+	data = (u8 *) maint_win + offset;
+	switch (len) {
+	case 1:
+		*val = in_8((u8 *) data);
+		break;
+	case 2:
+		*val = in_be16((u16 *) data);
+		break;
+	default:
+		*val = in_be32((u32 *) data);
+		break;
+	}
+
+	return 0;
+}
+
+/**
+ * mpc85xx_rio_config_write - Generate a MPC85xx write maintenance transaction
+ * @index: ID of RapdiIO interface
+ * @destid: Destination ID of transaction
+ * @hopcount: Number of hops to target device
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @val: Value to be written
+ *
+ * Generates an MPC85xx write maintenance transaction. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int
+mpc85xx_rio_config_write(int index, u16 destid, u8 hopcount, u32 offset,
+			 int len, u32 val)
+{
+	u8 *data;
+	pr_debug
+	    ("mpc85xx_rio_config_write: index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n",
+	     index, destid, hopcount, offset, len, val);
+	out_be32((void *)&maint_atmu_regs->rowtar,
+		 (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9));
+
+	data = (u8 *) maint_win + offset;
+	switch (len) {
+	case 1:
+		out_8((u8 *) data, val);
+		break;
+	case 2:
+		out_be16((u16 *) data, val);
+		break;
+	default:
+		out_be32((u32 *) data, val);
+		break;
+	}
+
+	return 0;
+}
+
+/**
+ * rio_hw_add_outb_message - Add message to the MPC85xx outbound message queue
+ * @mport: Master port with outbound message queue
+ * @rdev: Target of outbound message
+ * @mbox: Outbound mailbox
+ * @buffer: Message to add to outbound queue
+ * @len: Length of message
+ *
+ * Adds the @buffer message to the MPC85xx outbound message queue. Returns
+ * %0 on success or %-EINVAL on failure.
+ */
+int
+rio_hw_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
+			void *buffer, size_t len)
+{
+	u32 omr;
+	struct rio_tx_desc *desc =
+	    (struct rio_tx_desc *)msg_tx_ring.virt + msg_tx_ring.tx_slot;
+	int ret = 0;
+
+	pr_debug
+	    ("RIO: rio_hw_add_outb_message(): destid %4.4x mbox %d buffer %8.8x len %8.8x\n",
+	     rdev->destid, mbox, (int)buffer, len);
+
+	if ((len < 8) || (len > RIO_MAX_MSG_SIZE)) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* Copy and clear rest of buffer */
+	memcpy(msg_tx_ring.virt_buffer[msg_tx_ring.tx_slot], buffer, len);
+	if (len < (RIO_MAX_MSG_SIZE - 4))
+		memset((void *)((u32) msg_tx_ring.
+				virt_buffer[msg_tx_ring.tx_slot] + len), 0,
+		       RIO_MAX_MSG_SIZE - len);
+
+	/* Set mbox field for message */
+	desc->dport = mbox & 0x3;
+
+	/* Enable EOMI interrupt, set priority, and set destid */
+	desc->dattr = 0x28000000 | (rdev->destid << 2);
+
+	/* Set transfer size aligned to next power of 2 (in double words) */
+	desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len);
+
+	/* Set snooping and source buffer address */
+	desc->saddr = 0x00000004 | msg_tx_ring.phys_buffer[msg_tx_ring.tx_slot];
+
+	/* Increment enqueue pointer */
+	omr = in_be32((void *)&msg_regs->omr);
+	out_be32((void *)&msg_regs->omr, omr | RIO_MSG_OMR_MUI);
+
+	/* Go to next descriptor */
+	if (++msg_tx_ring.tx_slot == msg_tx_ring.size)
+		msg_tx_ring.tx_slot = 0;
+
+      out:
+	return ret;
+}
+
+EXPORT_SYMBOL_GPL(rio_hw_add_outb_message);
+
+/**
+ * mpc85xx_rio_tx_handler - MPC85xx outbound message interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ * @regs: Register context
+ *
+ * Handles outbound message interrupts. Executes a register outbound
+ * mailbox event handler and acks the interrupt occurence.
+ */
+static irqreturn_t
+mpc85xx_rio_tx_handler(int irq, void *dev_instance, struct pt_regs *regs)
+{
+	int osr;
+	struct rio_mport *port = (struct rio_mport *)dev_instance;
+
+	osr = in_be32((void *)&msg_regs->osr);
+
+	if (osr & RIO_MSG_OSR_TE) {
+		pr_info("RIO: outbound message transmission error\n");
+		out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_TE);
+		goto out;
+	}
+
+	if (osr & RIO_MSG_OSR_QOI) {
+		pr_info("RIO: outbound message queue overflow\n");
+		out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_QOI);
+		goto out;
+	}
+
+	if (osr & RIO_MSG_OSR_EOMI) {
+		u32 dqp = in_be32((void *)&msg_regs->odqdpar);
+		int slot = (dqp - msg_tx_ring.phys) >> 5;
+		port->outb_msg[0].mcback(port, msg_tx_ring.dev_id, -1, slot);
+
+		/* Ack the end-of-message interrupt */
+		out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_EOMI);
+	}
+
+      out:
+	return IRQ_HANDLED;
+}
+
+/**
+ * rio_open_outb_mbox - Initialize MPC85xx outbound mailbox
+ * @mport: Master port implementing the outbound message unit
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox to open
+ * @entries: Number of entries in the outbound mailbox ring
+ *
+ * Initializes buffer ring, request the outbound message interrupt,
+ * and enables the outbound message unit. Returns %0 on success and
+ * %-EINVAL or %-ENOMEM on failure.
+ */
+int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
+{
+	int i, j, rc = 0;
+
+	if ((entries < RIO_MIN_TX_RING_SIZE) ||
+	    (entries > RIO_MAX_TX_RING_SIZE) || (!is_power_of_2(entries))) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	/* Initialize shadow copy ring */
+	msg_tx_ring.dev_id = dev_id;
+	msg_tx_ring.size = entries;
+
+	for (i = 0; i < msg_tx_ring.size; i++) {
+		if (!
+		    (msg_tx_ring.virt_buffer[i] =
+		     dma_alloc_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+					&msg_tx_ring.phys_buffer[i],
+					GFP_KERNEL))) {
+			rc = -ENOMEM;
+			for (j = 0; j < msg_tx_ring.size; j++)
+				if (msg_tx_ring.virt_buffer[j])
+					dma_free_coherent(NULL,
+							  RIO_MSG_BUFFER_SIZE,
+							  msg_tx_ring.
+							  virt_buffer[j],
+							  msg_tx_ring.
+							  phys_buffer[j]);
+			goto out;
+		}
+	}
+
+	/* Initialize outbound message descriptor ring */
+	if (!(msg_tx_ring.virt = dma_alloc_coherent(NULL,
+						    msg_tx_ring.size *
+						    RIO_MSG_DESC_SIZE,
+						    &msg_tx_ring.phys,
+						    GFP_KERNEL))) {
+		rc = -ENOMEM;
+		goto out_dma;
+	}
+	memset(msg_tx_ring.virt, 0, msg_tx_ring.size * RIO_MSG_DESC_SIZE);
+	msg_tx_ring.tx_slot = 0;
+
+	/* Point dequeue/enqueue pointers at first entry in ring */
+	out_be32((void *)&msg_regs->odqdpar, msg_tx_ring.phys);
+	out_be32((void *)&msg_regs->odqepar, msg_tx_ring.phys);
+
+	/* Configure for snooping */
+	out_be32((void *)&msg_regs->osar, 0x00000004);
+
+	/* Clear interrupt status */
+	out_be32((void *)&msg_regs->osr, 0x000000b3);
+
+	/* Hook up outbound message handler */
+	if ((rc =
+	     request_irq(MPC85xx_IRQ_RIO_TX, mpc85xx_rio_tx_handler, 0,
+			 "msg_tx", (void *)mport)) < 0)
+		goto out_irq;
+
+	/*
+	 * Configure outbound message unit
+	 *      Snooping
+	 *      Interrupts (all enabled, except QEIE)
+	 *      Chaining mode
+	 *      Disable
+	 */
+	out_be32((void *)&msg_regs->omr, 0x00100220);
+
+	/* Set number of entries */
+	out_be32((void *)&msg_regs->omr,
+		 in_be32((void *)&msg_regs->omr) |
+		 ((get_bitmask_order(entries) - 2) << 12));
+
+	/* Now enable the unit */
+	out_be32((void *)&msg_regs->omr, in_be32((void *)&msg_regs->omr) | 0x1);
+
+      out:
+	return rc;
+
+      out_irq:
+	dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+			  msg_tx_ring.virt, msg_tx_ring.phys);
+
+      out_dma:
+	for (i = 0; i < msg_tx_ring.size; i++)
+		dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+				  msg_tx_ring.virt_buffer[i],
+				  msg_tx_ring.phys_buffer[i]);
+
+	return rc;
+}
+
+/**
+ * rio_close_outb_mbox - Shut down MPC85xx outbound mailbox
+ * @mport: Master port implementing the outbound message unit
+ * @mbox: Mailbox to close
+ *
+ * Disables the outbound message unit, free all buffers, and
+ * frees the outbound message interrupt.
+ */
+void rio_close_outb_mbox(struct rio_mport *mport, int mbox)
+{
+	/* Disable inbound message unit */
+	out_be32((void *)&msg_regs->omr, 0);
+
+	/* Free ring */
+	dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+			  msg_tx_ring.virt, msg_tx_ring.phys);
+
+	/* Free interrupt */
+	free_irq(MPC85xx_IRQ_RIO_TX, (void *)mport);
+}
+
+/**
+ * mpc85xx_rio_rx_handler - MPC85xx inbound message interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ * @regs: Register context
+ *
+ * Handles inbound message interrupts. Executes a registered inbound
+ * mailbox event handler and acks the interrupt occurence.
+ */
+static irqreturn_t
+mpc85xx_rio_rx_handler(int irq, void *dev_instance, struct pt_regs *regs)
+{
+	int isr;
+	struct rio_mport *port = (struct rio_mport *)dev_instance;
+
+	isr = in_be32((void *)&msg_regs->isr);
+
+	if (isr & RIO_MSG_ISR_TE) {
+		pr_info("RIO: inbound message reception error\n");
+		out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_TE);
+		goto out;
+	}
+
+	/* XXX Need to check/dispatch until queue empty */
+	if (isr & RIO_MSG_ISR_DIQI) {
+		/*
+		 * We implement *only* mailbox 0, but can receive messages
+		 * for any mailbox/letter to that mailbox destination. So,
+		 * make the callback with an unknown/invalid mailbox number
+		 * argument.
+		 */
+		port->inb_msg[0].mcback(port, msg_rx_ring.dev_id, -1, -1);
+
+		/* Ack the queueing interrupt */
+		out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_DIQI);
+	}
+
+      out:
+	return IRQ_HANDLED;
+}
+
+/**
+ * rio_open_inb_mbox - Initialize MPC85xx inbound mailbox
+ * @mport: Master port implementing the inbound message unit
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox to open
+ * @entries: Number of entries in the inbound mailbox ring
+ *
+ * Initializes buffer ring, request the inbound message interrupt,
+ * and enables the inbound message unit. Returns %0 on success
+ * and %-EINVAL or %-ENOMEM on failure.
+ */
+int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
+{
+	int i, rc = 0;
+
+	if ((entries < RIO_MIN_RX_RING_SIZE) ||
+	    (entries > RIO_MAX_RX_RING_SIZE) || (!is_power_of_2(entries))) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	/* Initialize client buffer ring */
+	msg_rx_ring.dev_id = dev_id;
+	msg_rx_ring.size = entries;
+	msg_rx_ring.rx_slot = 0;
+	for (i = 0; i < msg_rx_ring.size; i++)
+		msg_rx_ring.virt_buffer[i] = NULL;
+
+	/* Initialize inbound message ring */
+	if (!(msg_rx_ring.virt = dma_alloc_coherent(NULL,
+						    msg_rx_ring.size *
+						    RIO_MAX_MSG_SIZE,
+						    &msg_rx_ring.phys,
+						    GFP_KERNEL))) {
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	/* Point dequeue/enqueue pointers at first entry in ring */
+	out_be32((void *)&msg_regs->ifqdpar, (u32) msg_rx_ring.phys);
+	out_be32((void *)&msg_regs->ifqepar, (u32) msg_rx_ring.phys);
+
+	/* Clear interrupt status */
+	out_be32((void *)&msg_regs->isr, 0x00000091);
+
+	/* Hook up inbound message handler */
+	if ((rc =
+	     request_irq(MPC85xx_IRQ_RIO_RX, mpc85xx_rio_rx_handler, 0,
+			 "msg_rx", (void *)mport)) < 0) {
+		dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+				  msg_tx_ring.virt_buffer[i],
+				  msg_tx_ring.phys_buffer[i]);
+		goto out;
+	}
+
+	/*
+	 * Configure inbound message unit:
+	 *      Snooping
+	 *      4KB max message size
+	 *      Unmask all interrupt sources
+	 *      Disable
+	 */
+	out_be32((void *)&msg_regs->imr, 0x001b0060);
+
+	/* Set number of queue entries */
+	out_be32((void *)&msg_regs->imr,
+		 in_be32((void *)&msg_regs->imr) |
+		 ((get_bitmask_order(entries) - 2) << 12));
+
+	/* Now enable the unit */
+	out_be32((void *)&msg_regs->imr, in_be32((void *)&msg_regs->imr) | 0x1);
+
+      out:
+	return rc;
+}
+
+/**
+ * rio_close_inb_mbox - Shut down MPC85xx inbound mailbox
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Mailbox to close
+ *
+ * Disables the inbound message unit, free all buffers, and
+ * frees the inbound message interrupt.
+ */
+void rio_close_inb_mbox(struct rio_mport *mport, int mbox)
+{
+	/* Disable inbound message unit */
+	out_be32((void *)&msg_regs->imr, 0);
+
+	/* Free ring */
+	dma_free_coherent(NULL, msg_rx_ring.size * RIO_MAX_MSG_SIZE,
+			  msg_rx_ring.virt, msg_rx_ring.phys);
+
+	/* Free interrupt */
+	free_irq(MPC85xx_IRQ_RIO_RX, (void *)mport);
+}
+
+/**
+ * rio_hw_add_inb_buffer - Add buffer to the MPC85xx inbound message queue
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Inbound mailbox number
+ * @buf: Buffer to add to inbound queue
+ *
+ * Adds the @buf buffer to the MPC85xx inbound message queue. Returns
+ * %0 on success or %-EINVAL on failure.
+ */
+int rio_hw_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf)
+{
+	int rc = 0;
+
+	pr_debug("RIO: rio_hw_add_inb_buffer(), msg_rx_ring.rx_slot %d\n",
+		 msg_rx_ring.rx_slot);
+
+	if (msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot]) {
+		printk(KERN_ERR
+		       "RIO: error adding inbound buffer %d, buffer exists\n",
+		       msg_rx_ring.rx_slot);
+		rc = -EINVAL;
+		goto out;
+	}
+
+	msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot] = buf;
+	if (++msg_rx_ring.rx_slot == msg_rx_ring.size)
+		msg_rx_ring.rx_slot = 0;
+
+      out:
+	return rc;
+}
+
+EXPORT_SYMBOL_GPL(rio_hw_add_inb_buffer);
+
+/**
+ * rio_hw_get_inb_message - Fetch inbound message from the MPC85xx message unit
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Inbound mailbox number
+ *
+ * Gets the next available inbound message from the inbound message queue.
+ * A pointer to the message is returned on success or NULL on failure.
+ */
+void *rio_hw_get_inb_message(struct rio_mport *mport, int mbox)
+{
+	u32 imr;
+	u32 phys_buf, virt_buf;
+	void *buf = NULL;
+	int buf_idx;
+
+	phys_buf = in_be32((void *)&msg_regs->ifqdpar);
+
+	/* If no more messages, then bail out */
+	if (phys_buf == in_be32((void *)&msg_regs->ifqepar))
+		goto out2;
+
+	virt_buf = (u32) msg_rx_ring.virt + (phys_buf - msg_rx_ring.phys);
+	buf_idx = (phys_buf - msg_rx_ring.phys) / RIO_MAX_MSG_SIZE;
+	buf = msg_rx_ring.virt_buffer[buf_idx];
+
+	if (!buf) {
+		printk(KERN_ERR
+		       "RIO: inbound message copy failed, no buffers\n");
+		goto out1;
+	}
+
+	/* Copy max message size, caller is expected to allocate that big */
+	memcpy(buf, (void *)virt_buf, RIO_MAX_MSG_SIZE);
+
+	/* Clear the available buffer */
+	msg_rx_ring.virt_buffer[buf_idx] = NULL;
+
+      out1:
+	imr = in_be32((void *)&msg_regs->imr);
+	out_be32((void *)&msg_regs->imr, imr | RIO_MSG_IMR_MI);
+
+      out2:
+	return buf;
+}
+
+EXPORT_SYMBOL_GPL(rio_hw_get_inb_message);
+
+/**
+ * mpc85xx_rio_dbell_handler - MPC85xx doorbell interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ * @regs: Register context
+ *
+ * Handles doorbell interrupts. Parses a list of registered
+ * doorbell event handlers and executes a matching event handler.
+ */
+static irqreturn_t
+mpc85xx_rio_dbell_handler(int irq, void *dev_instance, struct pt_regs *regs)
+{
+	int dsr;
+	struct rio_mport *port = (struct rio_mport *)dev_instance;
+
+	dsr = in_be32((void *)&msg_regs->dsr);
+
+	if (dsr & DOORBELL_DSR_TE) {
+		pr_info("RIO: doorbell reception error\n");
+		out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_TE);
+		goto out;
+	}
+
+	if (dsr & DOORBELL_DSR_QFI) {
+		pr_info("RIO: doorbell queue full\n");
+		out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_QFI);
+		goto out;
+	}
+
+	/* XXX Need to check/dispatch until queue empty */
+	if (dsr & DOORBELL_DSR_DIQI) {
+		u32 dmsg =
+		    (u32) dbell_ring.virt +
+		    (in_be32((void *)&msg_regs->dqdpar) & 0xfff);
+		u32 dmr;
+		struct rio_dbell *dbell;
+		int found = 0;
+
+		pr_debug
+		    ("RIO: processing doorbell, sid %2.2x tid %2.2x info %4.4x\n",
+		     DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
+
+		list_for_each_entry(dbell, &port->dbells, node) {
+			if ((dbell->res->start <= DBELL_INF(dmsg)) &&
+			    (dbell->res->end >= DBELL_INF(dmsg))) {
+				found = 1;
+				break;
+			}
+		}
+		if (found) {
+			dbell->dinb(port, dbell->dev_id, DBELL_SID(dmsg), DBELL_TID(dmsg),
+				    DBELL_INF(dmsg));
+		} else {
+			pr_debug
+			    ("RIO: spurious doorbell, sid %2.2x tid %2.2x info %4.4x\n",
+			     DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
+		}
+		dmr = in_be32((void *)&msg_regs->dmr);
+		out_be32((void *)&msg_regs->dmr, dmr | DOORBELL_DMR_DI);
+		out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_DIQI);
+	}
+
+      out:
+	return IRQ_HANDLED;
+}
+
+/**
+ * mpc85xx_rio_doorbell_init - MPC85xx doorbell interface init
+ * @mport: Master port implementing the inbound doorbell unit
+ *
+ * Initializes doorbell unit hardware and inbound DMA buffer
+ * ring. Called from mpc85xx_rio_setup(). Returns %0 on success
+ * or %-ENOMEM on failure.
+ */
+static int mpc85xx_rio_doorbell_init(struct rio_mport *mport)
+{
+	int rc = 0;
+
+	/* Map outbound doorbell window immediately after maintenance window */
+	if (!(dbell_win =
+	      (u32) ioremap(mport->iores.start + RIO_MAINT_WIN_SIZE,
+			    RIO_DBELL_WIN_SIZE))) {
+		printk(KERN_ERR
+		       "RIO: unable to map outbound doorbell window\n");
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	/* Initialize inbound doorbells */
+	if (!(dbell_ring.virt = dma_alloc_coherent(NULL,
+						   512 * DOORBELL_MESSAGE_SIZE,
+						   &dbell_ring.phys,
+						   GFP_KERNEL))) {
+		printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n");
+		rc = -ENOMEM;
+		iounmap((void *)dbell_win);
+		goto out;
+	}
+
+	/* Point dequeue/enqueue pointers at first entry in ring */
+	out_be32((void *)&msg_regs->dqdpar, (u32) dbell_ring.phys);
+	out_be32((void *)&msg_regs->dqepar, (u32) dbell_ring.phys);
+
+	/* Clear interrupt status */
+	out_be32((void *)&msg_regs->dsr, 0x00000091);
+
+	/* Hook up doorbell handler */
+	if ((rc =
+	     request_irq(MPC85xx_IRQ_RIO_BELL, mpc85xx_rio_dbell_handler, 0,
+			 "dbell_rx", (void *)mport) < 0)) {
+		iounmap((void *)dbell_win);
+		dma_free_coherent(NULL, 512 * DOORBELL_MESSAGE_SIZE,
+				  dbell_ring.virt, dbell_ring.phys);
+		printk(KERN_ERR
+		       "MPC85xx RIO: unable to request inbound doorbell irq");
+		goto out;
+	}
+
+	/* Configure doorbells for snooping, 512 entries, and enable */
+	out_be32((void *)&msg_regs->dmr, 0x00108161);
+
+      out:
+	return rc;
+}
+
+static char *cmdline = NULL;
+
+static int mpc85xx_rio_get_hdid(int index)
+{
+	/* XXX Need to parse multiple entries in some format */
+	if (!cmdline)
+		return -1;
+
+	return simple_strtol(cmdline, NULL, 0);
+}
+
+static int mpc85xx_rio_get_cmdline(char *s)
+{
+	if (!s)
+		return 0;
+
+	cmdline = s;
+	return 1;
+}
+
+__setup("riohdid=", mpc85xx_rio_get_cmdline);
+
+/**
+ * mpc85xx_rio_setup - Setup MPC85xx RapidIO interface
+ * @law_start: Starting physical address of RapidIO LAW
+ * @law_size: Size of RapidIO LAW
+ *
+ * Initializes MPC85xx RapidIO hardware interface, configures
+ * master port with system-specific info, and registers the
+ * master port with the RapidIO subsystem.
+ */
+void mpc85xx_rio_setup(int law_start, int law_size)
+{
+	struct rio_ops *ops;
+	struct rio_mport *port;
+
+	ops = kmalloc(sizeof(struct rio_ops), GFP_KERNEL);
+	ops->lcread = mpc85xx_local_config_read;
+	ops->lcwrite = mpc85xx_local_config_write;
+	ops->cread = mpc85xx_rio_config_read;
+	ops->cwrite = mpc85xx_rio_config_write;
+	ops->dsend = mpc85xx_rio_doorbell_send;
+
+	port = kmalloc(sizeof(struct rio_mport), GFP_KERNEL);
+	port->id = 0;
+	port->index = 0;
+	INIT_LIST_HEAD(&port->dbells);
+	port->iores.start = law_start;
+	port->iores.end = law_start + law_size;
+	port->iores.flags = IORESOURCE_MEM;
+
+	rio_init_dbell_res(&port->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
+	rio_init_mbox_res(&port->riores[RIO_INB_MBOX_RESOURCE], 0, 0);
+	rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0);
+	strcpy(port->name, "RIO0 mport");
+
+	port->ops = ops;
+	port->host_deviceid = mpc85xx_rio_get_hdid(port->id);
+
+	rio_register_mport(port);
+
+	regs_win = (u32) ioremap(RIO_REGS_BASE, 0x20000);
+	atmu_regs = (struct rio_atmu_regs *)(regs_win + RIO_ATMU_REGS_OFFSET);
+	maint_atmu_regs = atmu_regs + 1;
+	dbell_atmu_regs = atmu_regs + 2;
+	msg_regs = (struct rio_msg_regs *)(regs_win + RIO_MSG_REGS_OFFSET);
+
+	/* Configure maintenance transaction window */
+	out_be32((void *)&maint_atmu_regs->rowbar, 0x000c0000);
+	out_be32((void *)&maint_atmu_regs->rowar, 0x80077015);
+
+	maint_win = (u32) ioremap(law_start, RIO_MAINT_WIN_SIZE);
+
+	/* Configure outbound doorbell window */
+	out_be32((void *)&dbell_atmu_regs->rowbar, 0x000c0400);
+	out_be32((void *)&dbell_atmu_regs->rowar, 0x8004200b);
+	mpc85xx_rio_doorbell_init(port);
+}
diff --git a/arch/ppc/syslib/ppc85xx_rio.h b/arch/ppc/syslib/ppc85xx_rio.h
new file mode 100644
index 000000000000..c0827a2c3eec
--- /dev/null
+++ b/arch/ppc/syslib/ppc85xx_rio.h
@@ -0,0 +1,21 @@
+/*
+ * MPC85xx RapidIO definitions
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PPC_SYSLIB_PPC85XX_RIO_H
+#define __PPC_SYSLIB_PPC85XX_RIO_H
+
+#include <linux/config.h>
+#include <linux/init.h>
+
+extern void mpc85xx_rio_setup(int law_start, int law_size);
+
+#endif				/* __PPC_SYSLIB_PPC85XX_RIO_H */
diff --git a/arch/ppc/syslib/ppc85xx_setup.c b/arch/ppc/syslib/ppc85xx_setup.c
index b7242f1bd931..1a47ff4b831d 100644
--- a/arch/ppc/syslib/ppc85xx_setup.c
+++ b/arch/ppc/syslib/ppc85xx_setup.c
@@ -3,7 +3,7 @@
  *
  * MPC85XX common board code
  *
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
  *
  * Copyright 2004 Freescale Semiconductor Inc.
  *
@@ -29,6 +29,7 @@
 #include <asm/mmu.h>
 #include <asm/ppc_sys.h>
 #include <asm/kgdb.h>
+#include <asm/machdep.h>
 
 #include <syslib/ppc85xx_setup.h>
 
@@ -184,8 +185,8 @@ mpc85xx_setup_pci1(struct pci_controller *hose)
 	pci->powar1 = 0x80044000 |
 	   (__ilog2(MPC85XX_PCI1_UPPER_MEM - MPC85XX_PCI1_LOWER_MEM + 1) - 1);
 
-	/* Setup outboud IO windows @ MPC85XX_PCI1_IO_BASE */
-	pci->potar2 = 0x00000000;
+	/* Setup outbound IO windows @ MPC85XX_PCI1_IO_BASE */
+	pci->potar2 = (MPC85XX_PCI1_LOWER_IO >> 12) & 0x000fffff;
 	pci->potear2 = 0x00000000;
 	pci->powbar2 = (MPC85XX_PCI1_IO_BASE >> 12) & 0x000fffff;
 	/* Enable, IO R/W */
@@ -235,8 +236,8 @@ mpc85xx_setup_pci2(struct pci_controller *hose)
 	pci->powar1 = 0x80044000 |
 	   (__ilog2(MPC85XX_PCI2_UPPER_MEM - MPC85XX_PCI2_LOWER_MEM + 1) - 1);
 
-	/* Setup outboud IO windows @ MPC85XX_PCI2_IO_BASE */
-	pci->potar2 = 0x00000000;
+	/* Setup outbound IO windows @ MPC85XX_PCI2_IO_BASE */
+	pci->potar2 = (MPC85XX_PCI2_LOWER_IO >> 12) & 0x000fffff;;
 	pci->potear2 = 0x00000000;
 	pci->powbar2 = (MPC85XX_PCI2_IO_BASE >> 12) & 0x000fffff;
 	/* Enable, IO R/W */
diff --git a/arch/ppc/syslib/ppc85xx_setup.h b/arch/ppc/syslib/ppc85xx_setup.h
index 6e6cfe162faf..e340b0545fb5 100644
--- a/arch/ppc/syslib/ppc85xx_setup.h
+++ b/arch/ppc/syslib/ppc85xx_setup.h
@@ -3,7 +3,7 @@
  *
  * MPC85XX common board definitions
  *
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
  *
  * Copyright 2004 Freescale Semiconductor Inc.
  *
diff --git a/arch/ppc/syslib/ppc8xx_pic.c b/arch/ppc/syslib/ppc8xx_pic.c
index d3b01c6c97de..3e6f51a61d46 100644
--- a/arch/ppc/syslib/ppc8xx_pic.c
+++ b/arch/ppc/syslib/ppc8xx_pic.c
@@ -6,6 +6,7 @@
 #include <linux/signal.h>
 #include <linux/interrupt.h>
 #include <asm/irq.h>
+#include <asm/io.h>
 #include <asm/8xx_immap.h>
 #include <asm/mpc8xx.h>
 #include "ppc8xx_pic.h"
@@ -29,8 +30,7 @@ static void m8xx_mask_irq(unsigned int irq_nr)
 	word = irq_nr >> 5;
 
 	ppc_cached_irq_mask[word] &= ~(1 << (31-bit));
-	((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask =
-						ppc_cached_irq_mask[word];
+	out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask, ppc_cached_irq_mask[word]);
 }
 
 static void m8xx_unmask_irq(unsigned int irq_nr)
@@ -41,8 +41,7 @@ static void m8xx_unmask_irq(unsigned int irq_nr)
 	word = irq_nr >> 5;
 
 	ppc_cached_irq_mask[word] |= (1 << (31-bit));
-	((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask =
-						ppc_cached_irq_mask[word];
+	out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask, ppc_cached_irq_mask[word]);
 }
 
 static void m8xx_end_irq(unsigned int irq_nr)
@@ -55,8 +54,7 @@ static void m8xx_end_irq(unsigned int irq_nr)
 		word = irq_nr >> 5;
 
 		ppc_cached_irq_mask[word] |= (1 << (31-bit));
-		((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask =
-			ppc_cached_irq_mask[word];
+		out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask, ppc_cached_irq_mask[word]);
 	}
 }
 
@@ -69,9 +67,8 @@ static void m8xx_mask_and_ack(unsigned int irq_nr)
 	word = irq_nr >> 5;
 
 	ppc_cached_irq_mask[word] &= ~(1 << (31-bit));
-	((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask =
-						ppc_cached_irq_mask[word];
-	((immap_t *)IMAP_ADDR)->im_siu_conf.sc_sipend = 1 << (31-bit);
+	out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask, ppc_cached_irq_mask[word]);
+	out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_sipend, 1 << (31-bit));
 }
 
 struct hw_interrupt_type ppc8xx_pic = {
@@ -93,7 +90,7 @@ m8xx_get_irq(struct pt_regs *regs)
 	/* For MPC8xx, read the SIVEC register and shift the bits down
 	 * to get the irq number.
 	 */
-	irq = ((immap_t *)IMAP_ADDR)->im_siu_conf.sc_sivec >> 26;
+	irq = in_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_sivec) >> 26;
 
 	/*
 	 * When we read the sivec without an interrupt to process, we will
diff --git a/arch/ppc/syslib/ppc_sys.c b/arch/ppc/syslib/ppc_sys.c
index 52ba0c68078d..c0b93c4191ee 100644
--- a/arch/ppc/syslib/ppc_sys.c
+++ b/arch/ppc/syslib/ppc_sys.c
@@ -3,7 +3,7 @@
  *
  * PPC System library functions
  *
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
  *
  * Copyright 2005 Freescale Semiconductor Inc.
  * Copyright 2005 MontaVista, Inc. by Vitaly Bordug <vbordug@ru.mvista.com>
@@ -14,6 +14,7 @@
  * option) any later version.
  */
 
+#include <linux/string.h>
 #include <asm/ppc_sys.h>
 
 int (*ppc_sys_device_fixup) (struct platform_device * pdev);
@@ -69,6 +70,9 @@ static int __init find_chip_by_name_and_id(char *name, u32 id)
 			matched[j++] = i;
 		i++;
 	}
+
+	ret = i;
+
 	if (j != 0) {
 		for (i = 0; i < j; i++) {
 			if ((ppc_sys_specs[matched[i]].mask & id) ==
diff --git a/arch/ppc/syslib/pq2_devices.c b/arch/ppc/syslib/pq2_devices.c
index 1d3869768f96..6ff3aab82fc3 100644
--- a/arch/ppc/syslib/pq2_devices.c
+++ b/arch/ppc/syslib/pq2_devices.c
@@ -3,7 +3,7 @@
  *
  * PQ2 Device descriptions
  *
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2. This program is licensed "as is" without any warranty of any
@@ -13,11 +13,12 @@
 
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/ioport.h>
 #include <asm/cpm2.h>
 #include <asm/irq.h>
 #include <asm/ppc_sys.h>
+#include <asm/machdep.h>
 
 struct platform_device ppc_sys_platform_devices[] = {
 	[MPC82xx_CPM_FCC1] = {
diff --git a/arch/ppc/syslib/pq2_sys.c b/arch/ppc/syslib/pq2_sys.c
index 7b6c9ebdb9e3..36d6e2179940 100644
--- a/arch/ppc/syslib/pq2_sys.c
+++ b/arch/ppc/syslib/pq2_sys.c
@@ -3,7 +3,7 @@
  *
  * PQ2 System descriptions
  *
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2. This program is licensed "as is" without any warranty of any
diff --git a/arch/ppc/syslib/prep_nvram.c b/arch/ppc/syslib/prep_nvram.c
index 8599850ca772..2c6364d9641f 100644
--- a/arch/ppc/syslib/prep_nvram.c
+++ b/arch/ppc/syslib/prep_nvram.c
@@ -22,14 +22,14 @@
 static char nvramData[MAX_PREP_NVRAM];
 static NVRAM_MAP *nvram=(NVRAM_MAP *)&nvramData[0];
 
-unsigned char __prep prep_nvram_read_val(int addr)
+unsigned char prep_nvram_read_val(int addr)
 {
 	outb(addr, PREP_NVRAM_AS0);
 	outb(addr>>8, PREP_NVRAM_AS1);
 	return inb(PREP_NVRAM_DATA);
 }
 
-void __prep prep_nvram_write_val(int           addr,
+void prep_nvram_write_val(int           addr,
 			  unsigned char val)
 {
 	outb(addr, PREP_NVRAM_AS0);
@@ -81,8 +81,7 @@ void __init init_prep_nvram(void)
 	}
 }
 
-__prep
-char __prep *prep_nvram_get_var(const char *name)
+char *prep_nvram_get_var(const char *name)
 {
 	char *cp;
 	int  namelen;
@@ -101,8 +100,7 @@ char __prep *prep_nvram_get_var(const char *name)
 	return NULL;
 }
 
-__prep
-char __prep *prep_nvram_first_var(void)
+char *prep_nvram_first_var(void)
 {
         if (nvram->Header.GELength == 0) {
 		return NULL;
@@ -112,8 +110,7 @@ char __prep *prep_nvram_first_var(void)
 	}
 }
 
-__prep
-char __prep *prep_nvram_next_var(char *name)
+char *prep_nvram_next_var(char *name)
 {
 	char *cp;
 
diff --git a/arch/ppc/syslib/prom.c b/arch/ppc/syslib/prom.c
index 2c64ed627475..af4deace49e0 100644
--- a/arch/ppc/syslib/prom.c
+++ b/arch/ppc/syslib/prom.c
@@ -13,7 +13,6 @@
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/init.h>
-#include <linux/version.h>
 #include <linux/threads.h>
 #include <linux/spinlock.h>
 #include <linux/ioport.h>
@@ -89,7 +88,7 @@ extern char cmd_line[512];	/* XXX */
 extern boot_infos_t *boot_infos;
 unsigned long dev_tree_size;
 
-void __openfirmware
+void
 phys_call_rtas(int service, int nargs, int nret, ...)
 {
 	va_list list;
@@ -862,7 +861,7 @@ find_type_devices(const char *type)
 /*
  * Returns all nodes linked together
  */
-struct device_node * __openfirmware
+struct device_node *
 find_all_nodes(void)
 {
 	struct device_node *head, **prevp, *np;
@@ -1165,7 +1164,7 @@ get_property(struct device_node *np, const char *name, int *lenp)
 /*
  * Add a property to a node
  */
-void __openfirmware
+int
 prom_add_property(struct device_node* np, struct property* prop)
 {
 	struct property **next = &np->properties;
@@ -1174,10 +1173,12 @@ prom_add_property(struct device_node* np, struct property* prop)
 	while (*next)
 		next = &(*next)->next;
 	*next = prop;
+
+	return 0;
 }
 
 /* I quickly hacked that one, check against spec ! */
-static inline unsigned long __openfirmware
+static inline unsigned long
 bus_space_to_resource_flags(unsigned int bus_space)
 {
 	u8 space = (bus_space >> 24) & 0xf;
@@ -1194,7 +1195,7 @@ bus_space_to_resource_flags(unsigned int bus_space)
 	}
 }
 
-static struct resource* __openfirmware
+static struct resource*
 find_parent_pci_resource(struct pci_dev* pdev, struct address_range *range)
 {
 	unsigned long mask;
@@ -1224,7 +1225,7 @@ find_parent_pci_resource(struct pci_dev* pdev, struct address_range *range)
  * or other nodes attached to the root node. Ultimately, put some
  * link to resources in the OF node.
  */
-struct resource* __openfirmware
+struct resource*
 request_OF_resource(struct device_node* node, int index, const char* name_postfix)
 {
 	struct pci_dev* pcidev;
@@ -1280,7 +1281,7 @@ fail:
 	return NULL;
 }
 
-int __openfirmware
+int
 release_OF_resource(struct device_node* node, int index)
 {
 	struct pci_dev* pcidev;
@@ -1335,10 +1336,8 @@ release_OF_resource(struct device_node* node, int index)
 	if (!res)
 		return -ENODEV;
 
-	if (res->name) {
-		kfree(res->name);
-		res->name = NULL;
-	}
+	kfree(res->name);
+	res->name = NULL;
 	release_resource(res);
 	kfree(res);
 
@@ -1346,7 +1345,7 @@ release_OF_resource(struct device_node* node, int index)
 }
 
 #if 0
-void __openfirmware
+void
 print_properties(struct device_node *np)
 {
 	struct property *pp;
@@ -1400,7 +1399,7 @@ print_properties(struct device_node *np)
 static DEFINE_SPINLOCK(rtas_lock);
 
 /* this can be called after setup -- Cort */
-int __openfirmware
+int
 call_rtas(const char *service, int nargs, int nret,
 	  unsigned long *outputs, ...)
 {
diff --git a/arch/ppc/syslib/prom_init.c b/arch/ppc/syslib/prom_init.c
index 7f15136830f4..df14422ae1c6 100644
--- a/arch/ppc/syslib/prom_init.c
+++ b/arch/ppc/syslib/prom_init.c
@@ -9,7 +9,6 @@
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/init.h>
-#include <linux/version.h>
 #include <linux/threads.h>
 #include <linux/spinlock.h>
 #include <linux/ioport.h>
diff --git a/arch/ppc/syslib/xilinx_pic.c b/arch/ppc/syslib/xilinx_pic.c
index 2cbcad278cef..47f04c71fe9c 100644
--- a/arch/ppc/syslib/xilinx_pic.c
+++ b/arch/ppc/syslib/xilinx_pic.c
@@ -17,6 +17,7 @@
 #include <asm/io.h>
 #include <asm/xparameters.h>
 #include <asm/ibm4xx.h>
+#include <asm/machdep.h>
 
 /* No one else should require these constants, so define them locally here. */
 #define ISR 0			/* Interrupt Status Register */
diff --git a/arch/ppc/xmon/start.c b/arch/ppc/xmon/start.c
index 507d4eeffe07..c80177f8ec04 100644
--- a/arch/ppc/xmon/start.c
+++ b/arch/ppc/xmon/start.c
@@ -184,7 +184,9 @@ xmon_map_scc(void)
 		sccc = base + (addr & ~PAGE_MASK);
 		sccd = sccc + 0x10;
 
-	} else {
+	}
+#ifdef CONFIG_PPC_CHRP
+	else {
 		base = (volatile unsigned char *) isa_io_base;
 		if (_machine == _MACH_chrp)
 			base = (volatile unsigned char *)
@@ -200,6 +202,7 @@ xmon_map_scc(void)
 		RXRDY = 1;
 		DLAB = 0x80;
 	}
+#endif /* CONFIG_PPC_CHRP */
 #elif defined(CONFIG_GEMINI)
 	/* should already be mapped by the kernel boot */
 	sccc = (volatile unsigned char *) 0xffeffb0d;
@@ -478,8 +481,9 @@ void *xmon_stdout;
 void *xmon_stderr;
 
 void
-xmon_init(void)
+xmon_init(int arg)
 {
+	xmon_map_scc();
 }
 
 int
diff --git a/arch/ppc/xmon/xmon.c b/arch/ppc/xmon/xmon.c
index be7869e39465..2b483b4f1602 100644
--- a/arch/ppc/xmon/xmon.c
+++ b/arch/ppc/xmon/xmon.c
@@ -148,9 +148,14 @@ Commands:\n\
   r	print registers\n\
   S	print special registers\n\
   t	print backtrace\n\
-  la	lookup address in system.map\n\
-  ls	lookup symbol in system.map\n\
+  la	lookup address\n\
+  ls	lookup symbol\n\
+  C	checksum\n\
+  p	call function with arguments\n\
+  T	print time\n\
   x	exit monitor\n\
+  zr    reboot\n\
+  zh    halt\n\
 ";
 
 static int xmon_trace[NR_CPUS];
@@ -215,8 +220,7 @@ static void get_tb(unsigned *p)
 	p[1] = lo;
 }
 
-void
-xmon(struct pt_regs *excp)
+int xmon(struct pt_regs *excp)
 {
 	struct pt_regs regs;
 	int msr, cmd;
@@ -285,6 +289,8 @@ xmon(struct pt_regs *excp)
 #endif /* CONFIG_SMP */
 	set_msr(msr);		/* restore interrupt enable */
 	get_tb(start_tb[smp_processor_id()]);
+
+	return cmd != 'X';
 }
 
 irqreturn_t
diff --git a/arch/ppc64/Kconfig b/arch/ppc64/Kconfig
deleted file mode 100644
index c658650af429..000000000000
--- a/arch/ppc64/Kconfig
+++ /dev/null
@@ -1,477 +0,0 @@
-#
-# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/kconfig-language.txt.
-#
-
-config 64BIT
-	def_bool y
-
-config MMU
-	bool
-	default y
-
-config UID16
-	bool
-
-config RWSEM_GENERIC_SPINLOCK
-	bool
-
-config RWSEM_XCHGADD_ALGORITHM
-	bool
-	default y
-
-config GENERIC_CALIBRATE_DELAY
-	bool
-	default y
-
-config GENERIC_ISA_DMA
-	bool
-	default y
-
-config EARLY_PRINTK
-	bool
-	default y
-
-config COMPAT
-	bool
-	default y
-
-config SCHED_NO_NO_OMIT_FRAME_POINTER
-	bool
-	default y
-
-config ARCH_MAY_HAVE_PC_FDC
-	bool
-	default y
-
-# We optimistically allocate largepages from the VM, so make the limit
-# large enough (16MB). This badly named config option is actually
-# max order + 1
-config FORCE_MAX_ZONEORDER
-	int
-	default "13"
-
-source "init/Kconfig"
-
-config SYSVIPC_COMPAT
-	bool
-	depends on COMPAT && SYSVIPC
-	default y
-
-menu "Platform support"
-
-choice
-	prompt "Platform Type"
-	default PPC_MULTIPLATFORM
-
-config PPC_ISERIES
-	bool "IBM Legacy iSeries"
-
-config PPC_MULTIPLATFORM
-	bool "Generic"
-
-endchoice
-
-config PPC_PSERIES
-	depends on PPC_MULTIPLATFORM
-	bool "  IBM pSeries & new iSeries"
-	default y
-
-config PPC_BPA
-	bool "  Broadband Processor Architecture"
-	depends on PPC_MULTIPLATFORM
-
-config PPC_PMAC
-	depends on PPC_MULTIPLATFORM
-	bool "  Apple G5 based machines"
-	default y
-	select U3_DART
-
-config PPC_MAPLE
-	depends on PPC_MULTIPLATFORM
-	bool "  Maple 970FX Evaluation Board"
-	select U3_DART
-	select MPIC_BROKEN_U3
-	default n
-	help
-          This option enables support for the Maple 970FX Evaluation Board.
-	  For more informations, refer to <http://www.970eval.com>
-
-config PPC
-	bool
-	default y
-
-config PPC64
-	bool
-	default y
-
-config PPC_OF
-	depends on PPC_MULTIPLATFORM
-	bool
-	default y
-
-config XICS
-	depends on PPC_PSERIES
-	bool
-	default y
-
-config MPIC
-	depends on PPC_PSERIES || PPC_PMAC || PPC_MAPLE
-	bool
-	default y
-
-config BPA_IIC
-	depends on PPC_BPA
-	bool
-	default y
-
-# VMX is pSeries only for now until somebody writes the iSeries
-# exception vectors for it
-config ALTIVEC
-	bool "Support for VMX (Altivec) vector unit"
-	depends on PPC_MULTIPLATFORM
-	default y
-
-config PPC_SPLPAR
-	depends on PPC_PSERIES
-	bool "Support for shared-processor logical partitions"
-	default n
-	help
-	  Enabling this option will make the kernel run more efficiently
-	  on logically-partitioned pSeries systems which use shared
-	  processors, that is, which share physical processors between
-	  two or more partitions.
-
-config KEXEC
-	bool "kexec system call (EXPERIMENTAL)"
-	depends on PPC_MULTIPLATFORM && EXPERIMENTAL
-	help
-	  kexec is a system call that implements the ability to shutdown your
-	  current kernel, and to start another kernel.  It is like a reboot
-	  but it is indepedent of the system firmware.  And like a reboot
-	  you can start any kernel with it, not just Linux.
-
-	  The name comes from the similiarity to the exec system call.
-
-	  It is an ongoing process to be certain the hardware in a machine
-	  is properly shutdown, so do not be surprised if this code does not
-	  initially work for you.  It may help to enable device hotplugging
-	  support.  As of this writing the exact hardware interface is
-	  strongly in flux, so no good recommendation can be made.
-
-config IBMVIO
-	depends on PPC_PSERIES || PPC_ISERIES
-	bool
-	default y
-
-config U3_DART
-	bool 
-	depends on PPC_MULTIPLATFORM
-	default n
-
-config MPIC_BROKEN_U3
-	bool
-	depends on PPC_MAPLE
-	default y
-
-config PPC_PMAC64
-	bool
-	depends on PPC_PMAC
-	default y
-
-config BOOTX_TEXT
-	bool "Support for early boot text console"
-	depends PPC_OF
-	help
-	  Say Y here to see progress messages from the boot firmware in text
-	  mode. Requires an Open Firmware compatible video card.
-
-config POWER4_ONLY
-	bool "Optimize for POWER4"
-	default n
-	---help---
-	  Cause the compiler to optimize for POWER4 processors. The resulting
-	  binary will not work on POWER3 or RS64 processors when compiled with
-	  binutils 2.15 or later.
-
-config IOMMU_VMERGE
-	bool "Enable IOMMU virtual merging (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	default n
-	help
-	  Cause IO segments sent to a device for DMA to be merged virtually
-	  by the IOMMU when they happen to have been allocated contiguously.
-	  This doesn't add pressure to the IOMMU allocator. However, some
-	  drivers don't support getting large merged segments coming back
-	  from *_map_sg(). Say Y if you know the drivers you are using are
-	  properly handling this case.
-
-config SMP
-	bool "Symmetric multi-processing support"
-	---help---
-	  This enables support for systems with more than one CPU. If you have
-	  a system with only one CPU, say N. If you have a system with more
-	  than one CPU, say Y.
-
-	  If you say N here, the kernel will run on single and multiprocessor
-	  machines, but will use only one CPU of a multiprocessor machine. If
-	  you say Y here, the kernel will run on single-processor machines.
-	  On a single-processor machine, the kernel will run faster if you say
-	  N here.
-
-	  If you don't know what to do here, say Y.
-
-config NR_CPUS
-	int "Maximum number of CPUs (2-128)"
-	range 2 128
-	depends on SMP
-	default "32"
-
-config HMT
-	bool "Hardware multithreading"
-	depends on SMP && PPC_PSERIES && BROKEN
-	help
-	  This option enables hardware multithreading on RS64 cpus.
-	  pSeries systems p620 and p660 have such a cpu type.
-
-config ARCH_SELECT_MEMORY_MODEL
-	def_bool y
-
-config ARCH_FLATMEM_ENABLE
-       def_bool y
-       depends on !NUMA
-
-config ARCH_DISCONTIGMEM_ENABLE
-	def_bool y
-	depends on SMP && PPC_PSERIES
-
-config ARCH_DISCONTIGMEM_DEFAULT
-	def_bool y
-	depends on ARCH_DISCONTIGMEM_ENABLE
-
-config ARCH_FLATMEM_ENABLE
-	def_bool y
-
-config ARCH_SPARSEMEM_ENABLE
-	def_bool y
-	depends on ARCH_DISCONTIGMEM_ENABLE
-
-source "mm/Kconfig"
-
-config HAVE_ARCH_EARLY_PFN_TO_NID
-	def_bool y
-	depends on NEED_MULTIPLE_NODES
-
-# Some NUMA nodes have memory ranges that span
-# other nodes.  Even though a pfn is valid and
-# between a node's start and end pfns, it may not
-# reside on that node.
-#
-# This is a relatively temporary hack that should
-# be able to go away when sparsemem is fully in
-# place
-config NODES_SPAN_OTHER_NODES
-	def_bool y
-	depends on NEED_MULTIPLE_NODES
-
-config NUMA
-	bool "NUMA support"
-	default y if DISCONTIGMEM || SPARSEMEM
-
-config SCHED_SMT
-	bool "SMT (Hyperthreading) scheduler support"
-	depends on SMP
-	default off
-	help
-	  SMT scheduler support improves the CPU scheduler's decision making
-	  when dealing with POWER5 cpus at a cost of slightly increased
-	  overhead in some places. If unsure say N here.
-
-source "kernel/Kconfig.preempt"
-source kernel/Kconfig.hz
-
-config EEH
-	bool "PCI Extended Error Handling (EEH)" if EMBEDDED
-	depends on PPC_PSERIES
-	default y if !EMBEDDED
-
-#
-# Use the generic interrupt handling code in kernel/irq/:
-#
-config GENERIC_HARDIRQS
-	bool
-	default y
-
-config PPC_RTAS
-	bool
-	depends on PPC_PSERIES || PPC_BPA
-	default y
-
-config RTAS_PROC
-	bool "Proc interface to RTAS"
-	depends on PPC_RTAS
-	default y
-
-config RTAS_FLASH
-	tristate "Firmware flash interface"
-	depends on RTAS_PROC
-
-config SCANLOG
-	tristate "Scanlog dump interface"
-	depends on RTAS_PROC && PPC_PSERIES
-
-config LPARCFG
-	tristate "LPAR Configuration Data"
-	depends on PPC_PSERIES || PPC_ISERIES
-	help
-	Provide system capacity information via human readable
-	<key word>=<value> pairs through a /proc/ppc64/lparcfg interface.
-
-config SECCOMP
-	bool "Enable seccomp to safely compute untrusted bytecode"
-	depends on PROC_FS
-	default y
-	help
-	  This kernel feature is useful for number crunching applications
-	  that may need to compute untrusted bytecode during their
-	  execution. By using pipes or other transports made available to
-	  the process as file descriptors supporting the read/write
-	  syscalls, it's possible to isolate those applications in
-	  their own address space using seccomp. Once seccomp is
-	  enabled via /proc/<pid>/seccomp, it cannot be disabled
-	  and the task is only allowed to execute a few safe syscalls
-	  defined by each seccomp mode.
-
-	  If unsure, say Y. Only embedded should say N here.
-
-source "fs/Kconfig.binfmt"
-
-config HOTPLUG_CPU
-	bool "Support for hot-pluggable CPUs"
-	depends on SMP && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC)
-	select HOTPLUG
-	---help---
-	  Say Y here to be able to turn CPUs off and on.
-
-	  Say N if you are unsure.
-
-config PROC_DEVICETREE
-	bool "Support for Open Firmware device tree in /proc"
-	depends on !PPC_ISERIES
-	help
-	  This option adds a device-tree directory under /proc which contains
-	  an image of the device tree that the kernel copies from Open
-	  Firmware. If unsure, say Y here.
-
-config CMDLINE_BOOL
-	bool "Default bootloader kernel arguments"
-	depends on !PPC_ISERIES
-
-config CMDLINE
-	string "Initial kernel command string"
-	depends on CMDLINE_BOOL
-	default "console=ttyS0,9600 console=tty0 root=/dev/sda2"
-	help
-	  On some platforms, there is currently no way for the boot loader to
-	  pass arguments to the kernel. For these platforms, you can supply
-	  some command-line options at build time by entering them here.  In
-	  most cases you will need to specify the root device here.
-
-endmenu
-
-config ISA_DMA_API
-	bool
-	default y
-
-menu "Bus Options"
-
-config ISA
-	bool
-	help
-	  Find out whether you have ISA slots on your motherboard.  ISA is the
-	  name of a bus system, i.e. the way the CPU talks to the other stuff
-	  inside your box.  If you have an Apple machine, say N here; if you
-	  have an IBM RS/6000 or pSeries machine or a PReP machine, say Y.  If
-	  you have an embedded board, consult your board documentation.
-
-config SBUS
-	bool
-
-config MCA
-	bool
-
-config EISA
-	bool
-
-config PCI
-	bool "support for PCI devices" if (EMBEDDED && PPC_ISERIES)
-	default y
-	help
-	  Find out whether your system includes a PCI bus. PCI is the name of
-	  a bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box.  If you say Y here, the kernel will include drivers and
-	  infrastructure code to support PCI bus devices.
-
-config PCI_DOMAINS
-	bool
-	default PCI
-
-source "drivers/pci/Kconfig"
-
-source "drivers/pcmcia/Kconfig"
-
-source "drivers/pci/hotplug/Kconfig"
-
-endmenu
-
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "fs/Kconfig"
-
-menu "iSeries device drivers"
-	depends on PPC_ISERIES
-
-config VIOCONS
-	tristate "iSeries Virtual Console Support"
-
-config VIODASD
-	tristate "iSeries Virtual I/O disk support"
-	help
-	  If you are running on an iSeries system and you want to use
- 	  virtual disks created and managed by OS/400, say Y.
-
-config VIOCD
-	tristate "iSeries Virtual I/O CD support"
-	help
-	  If you are running Linux on an IBM iSeries system and you want to
-	  read a CD drive owned by OS/400, say Y here.
-
-config VIOTAPE
-	tristate "iSeries Virtual Tape Support"
-	help
-	  If you are running Linux on an iSeries system and you want Linux
-	  to read and/or write a tape drive owned by OS/400, say Y here.
-
-endmenu
-
-config VIOPATH
-	bool
-	depends on VIOCONS || VIODASD || VIOCD || VIOTAPE || VETH
-	default y
-
-source "arch/ppc64/oprofile/Kconfig"
-
-source "arch/ppc64/Kconfig.debug"
-
-source "security/Kconfig"
-
-config KEYS_COMPAT
-	bool
-	depends on COMPAT && KEYS
-	default y
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
diff --git a/arch/ppc64/Kconfig.debug b/arch/ppc64/Kconfig.debug
deleted file mode 100644
index f16a5030527b..000000000000
--- a/arch/ppc64/Kconfig.debug
+++ /dev/null
@@ -1,69 +0,0 @@
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
-
-config DEBUG_STACKOVERFLOW
-	bool "Check for stack overflows"
-	depends on DEBUG_KERNEL
-	help
-	  This option will cause messages to be printed if free stack space
-	  drops below a certain limit.
-
-config KPROBES
-	bool "Kprobes"
-	depends on DEBUG_KERNEL
-	help
-	  Kprobes allows you to trap at almost any kernel address and
-	  execute a callback function.  register_kprobe() establishes
-	  a probepoint and specifies the callback.  Kprobes is useful
-	  for kernel debugging, non-intrusive instrumentation and testing.
-	  If in doubt, say "N".
-
-config DEBUG_STACK_USAGE
-	bool "Stack utilization instrumentation"
-	depends on DEBUG_KERNEL
-	help
-	  Enables the display of the minimum amount of free stack which each
-	  task has ever had available in the sysrq-T and sysrq-P debug output.
-
-	  This option will slow down process creation somewhat.
-
-config DEBUGGER
-	bool "Enable debugger hooks"
-	depends on DEBUG_KERNEL
-	help
-	  Include in-kernel hooks for kernel debuggers. Unless you are
-	  intending to debug the kernel, say N here.
-
-config XMON
-	bool "Include xmon kernel debugger"
-	depends on DEBUGGER && !PPC_ISERIES
-	help
-	  Include in-kernel hooks for the xmon kernel monitor/debugger.
-	  Unless you are intending to debug the kernel, say N here.
-	  Make sure to enable also CONFIG_BOOTX_TEXT on Macs. Otherwise
-	  nothing will appear on the screen (xmon writes directly to the
-	  framebuffer memory).
-	  The cmdline option 'xmon' or 'xmon=early' will drop into xmon very
-	  early during boot. 'xmon=on' will just enable the xmon debugger hooks.
-	  'xmon=off' will disable the debugger hooks if CONFIG_XMON_DEFAULT is set.
-
-config XMON_DEFAULT
-	bool "Enable xmon by default"
-	depends on XMON
-	help
-	  xmon is normally disabled unless booted with 'xmon=on'.
-	  Use 'xmon=off' to disable xmon init during runtime.
-
-config PPCDBG
-	bool "Include PPCDBG realtime debugging"
-	depends on DEBUG_KERNEL
-
-config IRQSTACKS
-	bool "Use separate kernel stacks when processing interrupts"
-	help
-	  If you say Y here the kernel will use separate kernel stacks
-	  for handling hard and soft interrupts.  This can help avoid
-	  overflowing the process kernel stacks.
-
-endmenu
diff --git a/arch/ppc64/Makefile b/arch/ppc64/Makefile
deleted file mode 100644
index 521c2a5a2862..000000000000
--- a/arch/ppc64/Makefile
+++ /dev/null
@@ -1,135 +0,0 @@
-# This file is included by the global makefile so that you can add your own
-# architecture-specific flags and dependencies. Remember to do have actions
-# for "archclean" and "archdep" for cleaning up and making dependencies for
-# this architecture
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1994 by Linus Torvalds
-# Changes for PPC by Gary Thomas
-# Rewritten by Cort Dougan and Paul Mackerras
-# Adjusted for PPC64 by Tom Gall
-#
-
-KERNELLOAD	:= 0xc000000000000000
-
-# Set default 32 bits cross compilers for vdso and boot wrapper
-CROSS32_COMPILE ?=
-
-CROSS32CC		:= $(CROSS32_COMPILE)gcc
-CROSS32AS		:= $(CROSS32_COMPILE)as
-CROSS32LD		:= $(CROSS32_COMPILE)ld
-CROSS32OBJCOPY		:= $(CROSS32_COMPILE)objcopy
-
-# If we have a biarch compiler, use it for 32 bits cross compile if
-# CROSS32_COMPILE wasn't explicitely defined, and add proper explicit
-# target type to target compilers
-
-HAS_BIARCH      := $(call cc-option-yn, -m64)
-ifeq ($(HAS_BIARCH),y)
-ifeq ($(CROSS32_COMPILE),)
-CROSS32CC	:= $(CC) -m32
-CROSS32AS	:= $(AS) -a32
-CROSS32LD	:= $(LD) -m elf32ppc
-CROSS32OBJCOPY	:= $(OBJCOPY)
-endif
-override AS	+= -a64
-override LD	+= -m elf64ppc
-override CC	+= -m64
-endif
-
-export CROSS32CC CROSS32AS CROSS32LD CROSS32OBJCOPY
-
-new_nm := $(shell if $(NM) --help 2>&1 | grep -- '--synthetic' > /dev/null; then echo y; else echo n; fi)
-
-ifeq ($(new_nm),y)
-NM		:= $(NM) --synthetic
-
-endif
-
-CHECKFLAGS	+= -m64 -D__powerpc__ -D__powerpc64__
-
-LDFLAGS		:= -m elf64ppc
-LDFLAGS_vmlinux	:= -Bstatic -e $(KERNELLOAD) -Ttext $(KERNELLOAD)
-CFLAGS		+= -msoft-float -pipe -mminimal-toc -mtraceback=none \
-		   -mcall-aixdesc
-# Temporary hack until we have migrated to asm-powerpc
-CPPFLAGS	+= -Iarch/$(ARCH)/include
-
-GCC_VERSION     := $(call cc-version)
-GCC_BROKEN_VEC	:= $(shell if [ $(GCC_VERSION) -lt 0400 ] ; then echo "y"; fi ;)
-
-ifeq ($(CONFIG_POWER4_ONLY),y)
-ifeq ($(CONFIG_ALTIVEC),y)
-ifeq ($(GCC_BROKEN_VEC),y)
-	CFLAGS += $(call cc-option,-mcpu=970)
-else
-	CFLAGS += $(call cc-option,-mcpu=power4)
-endif
-else
-	CFLAGS += $(call cc-option,-mcpu=power4)
-endif
-else
-	CFLAGS += $(call cc-option,-mtune=power4)
-endif
-
-# Enable unit-at-a-time mode when possible. It shrinks the
-# kernel considerably.
-CFLAGS += $(call cc-option,-funit-at-a-time)
-
-head-y := arch/ppc64/kernel/head.o
-
-libs-y				+= arch/ppc64/lib/
-core-y				+= arch/ppc64/kernel/
-core-y				+= arch/ppc64/mm/
-core-$(CONFIG_XMON)		+= arch/ppc64/xmon/
-drivers-$(CONFIG_OPROFILE)	+= arch/ppc64/oprofile/
-
-boot := arch/ppc64/boot
-
-boottargets-$(CONFIG_PPC_PSERIES) += zImage zImage.initrd
-boottargets-$(CONFIG_PPC_PMAC) += zImage.vmode zImage.initrd.vmode
-boottargets-$(CONFIG_PPC_MAPLE) += zImage zImage.initrd
-boottargets-$(CONFIG_PPC_ISERIES) += vmlinux.sminitrd vmlinux.initrd vmlinux.sm
-boottargets-$(CONFIG_PPC_BPA) += zImage zImage.initrd
-$(boottargets-y): vmlinux
-	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
-
-bootimage-$(CONFIG_PPC_PSERIES) := $(boot)/zImage
-bootimage-$(CONFIG_PPC_PMAC) := vmlinux
-bootimage-$(CONFIG_PPC_MAPLE) := $(boot)/zImage
-bootimage-$(CONFIG_PPC_BPA) := zImage
-bootimage-$(CONFIG_PPC_ISERIES) := vmlinux
-BOOTIMAGE := $(bootimage-y)
-install: vmlinux
-	$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) $@
-
-defaultimage-$(CONFIG_PPC_PSERIES) := zImage
-defaultimage-$(CONFIG_PPC_PMAC) := zImage.vmode
-defaultimage-$(CONFIG_PPC_MAPLE) := zImage
-defaultimage-$(CONFIG_PPC_ISERIES) := vmlinux
-KBUILD_IMAGE := $(defaultimage-y)
-all: $(KBUILD_IMAGE)
-
-archclean:
-	$(Q)$(MAKE) $(clean)=$(boot)
-	# Temporary hack until we have migrated to asm-powerpc
-	$(Q)rm -rf arch/$(ARCH)/include
-
-
-# Temporary hack until we have migrated to asm-powerpc
-include/asm: arch/$(ARCH)/include/asm
-arch/$(ARCH)/include/asm:
-	$(Q)if [ ! -d arch/$(ARCH)/include ]; then mkdir -p arch/$(ARCH)/include; fi
-	$(Q)ln -fsn $(srctree)/include/asm-powerpc arch/$(ARCH)/include/asm
-
-define archhelp
-  echo  '  zImage.vmode        - Compressed kernel image (arch/$(ARCH)/boot/zImage.vmode)'
-  echo  '  zImage.initrd.vmode - Compressed kernel image with initrd attached,'
-  echo  '                        sourced from arch/$(ARCH)/boot/ramdisk.image.gz'
-  echo  '                        (arch/$(ARCH)/boot/zImage.initrd.vmode)'
-  echo  '  zImage              - zImage for pSeries machines'
-  echo  '  zImage.initrd       - zImage with initrd for pSeries machines'
-endef
diff --git a/arch/ppc64/boot/crt0.S b/arch/ppc64/boot/crt0.S
deleted file mode 100644
index 3861e7f9cf19..000000000000
--- a/arch/ppc64/boot/crt0.S
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * NOTE: this code runs in 32 bit mode and is packaged as ELF32.
- */
-
-#include "ppc_asm.h"
-
-	.text
-	.globl	_start
-_start:
-	lis	r9,_start@h
-	lis	r8,_etext@ha
-	addi	r8,r8,_etext@l
-1:	dcbf	r0,r9
-	icbi	r0,r9
-	addi	r9,r9,0x20
-	cmplwi	0,r9,8
-	blt	1b
-	sync
-	isync
-
-	## Clear out the BSS as per ANSI C requirements
-
-	lis	r7,_end@ha
-	addi    r7,r7,_end@l		# r7 = &_end 
-	lis	r8,__bss_start@ha	# 
-	addi    r8,r8,__bss_start@l	# r8 = &_bss_start
-
-	## Determine how large an area, in number of words, to clear
-
-	subf	r7,r8,r7		# r7 = &_end - &_bss_start + 1 
-	addi	r7,r7,3			# r7 += 3 
-	srwi.	r7,r7,2			# r7 = size in words.
-	beq	3f			# If the size is zero, don't bother
-	addi	r8,r8,-4		# r8 -= 4 
-	mtctr	r7			# SPRN_CTR = number of words to clear
-	li	r0,0			# r0 = 0
-2:	stwu	r0,4(r8)		# Clear out a word
-	bdnz	2b			# Keep clearing until done
-3:
-	b	start
-
diff --git a/arch/ppc64/boot/zImage.lds b/arch/ppc64/boot/zImage.lds
deleted file mode 100644
index 8fe5e7071f54..000000000000
--- a/arch/ppc64/boot/zImage.lds
+++ /dev/null
@@ -1,90 +0,0 @@
-OUTPUT_ARCH(powerpc:common)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)      }
-  .dynsym        : { *(.dynsym)        }
-  .dynstr        : { *(.dynstr)        }
-  .rel.text      : { *(.rel.text)      }
-  .rela.text     : { *(.rela.text)     }
-  .rel.data      : { *(.rel.data)      }
-  .rela.data     : { *(.rela.data)     }
-  .rel.rodata    : { *(.rel.rodata)    }
-  .rela.rodata   : { *(.rela.rodata)   }
-  .rel.got       : { *(.rel.got)       }
-  .rela.got      : { *(.rela.got)      }
-  .rel.ctors     : { *(.rel.ctors) }
-  .rela.ctors    : { *(.rela.ctors)    }
-  .rel.dtors     : { *(.rel.dtors) }
-  .rela.dtors    : { *(.rela.dtors)    }
-  .rel.bss       : { *(.rel.bss)       }
-  .rela.bss      : { *(.rela.bss)      }
-  .rel.plt       : { *(.rel.plt)       }
-  .rela.plt      : { *(.rela.plt)      }
-  .plt : { *(.plt) }
-  .text      :
-  {
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  . = ALIGN(4096);
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-  }
-  .kstrtab   : { *(.kstrtab) }
-  __vermagic : { *(__vermagic) }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-  /* Read-write section, merged into data segment: */
-  . = ALIGN(4096);
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.got.plt) *(.got)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-
-  . = ALIGN(4096);
-  _vmlinux_start =  .;
-  .kernel:vmlinux.strip : { *(.kernel:vmlinux.strip) }
-  _vmlinux_end =  .;
-
-  . = ALIGN(4096);
-  _initrd_start =  .;
-  .kernel:initrd : { *(.kernel:initrd) }
-  _initrd_end =  .;
-
-  . = ALIGN(4096);
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  .fixup   : { *(.fixup) }
-
-  . = ALIGN(4096);
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  . = ALIGN(4096);
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/arch/ppc64/boot/zlib.c b/arch/ppc64/boot/zlib.c
deleted file mode 100644
index 0d910cd2079d..000000000000
--- a/arch/ppc64/boot/zlib.c
+++ /dev/null
@@ -1,2195 +0,0 @@
-/*
- * This file is derived from various .h and .c files from the zlib-0.95
- * distribution by Jean-loup Gailly and Mark Adler, with some additions
- * by Paul Mackerras to aid in implementing Deflate compression and
- * decompression for PPP packets.  See zlib.h for conditions of
- * distribution and use.
- *
- * Changes that have been made include:
- * - changed functions not used outside this file to "local"
- * - added minCompression parameter to deflateInit2
- * - added Z_PACKET_FLUSH (see zlib.h for details)
- * - added inflateIncomp
- *
-  Copyright (C) 1995 Jean-loup Gailly and Mark Adler
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the authors be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-
-  Jean-loup Gailly        Mark Adler
-  gzip@prep.ai.mit.edu    madler@alumni.caltech.edu
-
- *
- * 
- */
-
-/*+++++*/
-/* zutil.h -- internal interface and configuration of the compression library
- * Copyright (C) 1995 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* From: zutil.h,v 1.9 1995/05/03 17:27:12 jloup Exp */
-
-#define _Z_UTIL_H
-
-#include "zlib.h"
-
-#ifndef local
-#  define local static
-#endif
-/* compile with -Dlocal if your debugger can't find static symbols */
-
-#define FAR
-
-typedef unsigned char  uch;
-typedef uch FAR uchf;
-typedef unsigned short ush;
-typedef ush FAR ushf;
-typedef unsigned long  ulg;
-
-extern char *z_errmsg[]; /* indexed by 1-zlib_error */
-
-#define ERR_RETURN(strm,err) return (strm->msg=z_errmsg[1-err], err)
-/* To be used only when the state is known to be valid */
-
-#ifndef NULL
-#define NULL	((void *) 0)
-#endif
-
-        /* common constants */
-
-#define DEFLATED   8
-
-#ifndef DEF_WBITS
-#  define DEF_WBITS MAX_WBITS
-#endif
-/* default windowBits for decompression. MAX_WBITS is for compression only */
-
-#if MAX_MEM_LEVEL >= 8
-#  define DEF_MEM_LEVEL 8
-#else
-#  define DEF_MEM_LEVEL  MAX_MEM_LEVEL
-#endif
-/* default memLevel */
-
-#define STORED_BLOCK 0
-#define STATIC_TREES 1
-#define DYN_TREES    2
-/* The three kinds of block type */
-
-#define MIN_MATCH  3
-#define MAX_MATCH  258
-/* The minimum and maximum match lengths */
-
-         /* functions */
-
-extern void *memcpy(void *, const void *, unsigned long);
-#define zmemcpy memcpy
-
-/* Diagnostic functions */
-#ifdef DEBUG_ZLIB
-#  include "stdio.h"
-#  ifndef verbose
-#    define verbose 0
-#  endif
-#  define Assert(cond,msg) {if(!(cond)) z_error(msg);}
-#  define Trace(x) fprintf x
-#  define Tracev(x) {if (verbose) fprintf x ;}
-#  define Tracevv(x) {if (verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-#  define Assert(cond,msg)
-#  define Trace(x)
-#  define Tracev(x)
-#  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
-#endif
-
-
-typedef uLong (*check_func) OF((uLong check, Bytef *buf, uInt len));
-
-/* voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size)); */
-/* void   zcfree  OF((voidpf opaque, voidpf ptr)); */
-
-#define ZALLOC(strm, items, size) \
-           (*((strm)->zalloc))((strm)->opaque, (items), (size))
-#define ZFREE(strm, addr, size)	\
-	   (*((strm)->zfree))((strm)->opaque, (voidpf)(addr), (size))
-#define TRY_FREE(s, p, n) {if (p) ZFREE(s, p, n);}
-
-/* deflate.h -- internal compression state
- * Copyright (C) 1995 Jean-loup Gailly
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/*+++++*/
-/* infblock.h -- header to use infblock.c
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-struct inflate_blocks_state;
-typedef struct inflate_blocks_state FAR inflate_blocks_statef;
-
-local inflate_blocks_statef * inflate_blocks_new OF((
-    z_stream *z,
-    check_func c,               /* check function */
-    uInt w));                   /* window size */
-
-local int inflate_blocks OF((
-    inflate_blocks_statef *,
-    z_stream *,
-    int));                      /* initial return code */
-
-local void inflate_blocks_reset OF((
-    inflate_blocks_statef *,
-    z_stream *,
-    uLongf *));                  /* check value on output */
-
-local int inflate_blocks_free OF((
-    inflate_blocks_statef *,
-    z_stream *,
-    uLongf *));                  /* check value on output */
-
-local int inflate_addhistory OF((
-    inflate_blocks_statef *,
-    z_stream *));
-
-local int inflate_packet_flush OF((
-    inflate_blocks_statef *));
-
-/*+++++*/
-/* inftrees.h -- header to use inftrees.c
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* Huffman code lookup table entry--this entry is four bytes for machines
-   that have 16-bit pointers (e.g. PC's in the small or medium model). */
-
-typedef struct inflate_huft_s FAR inflate_huft;
-
-struct inflate_huft_s {
-  union {
-    struct {
-      Byte Exop;        /* number of extra bits or operation */
-      Byte Bits;        /* number of bits in this code or subcode */
-    } what;
-    uInt Nalloc;	/* number of these allocated here */
-    Bytef *pad;         /* pad structure to a power of 2 (4 bytes for */
-  } word;               /*  16-bit, 8 bytes for 32-bit machines) */
-  union {
-    uInt Base;          /* literal, length base, or distance base */
-    inflate_huft *Next; /* pointer to next level of table */
-  } more;
-};
-
-#ifdef DEBUG_ZLIB
-  local uInt inflate_hufts;
-#endif
-
-local int inflate_trees_bits OF((
-    uIntf *,                    /* 19 code lengths */
-    uIntf *,                    /* bits tree desired/actual depth */
-    inflate_huft * FAR *,       /* bits tree result */
-    z_stream *));               /* for zalloc, zfree functions */
-
-local int inflate_trees_dynamic OF((
-    uInt,                       /* number of literal/length codes */
-    uInt,                       /* number of distance codes */
-    uIntf *,                    /* that many (total) code lengths */
-    uIntf *,                    /* literal desired/actual bit depth */
-    uIntf *,                    /* distance desired/actual bit depth */
-    inflate_huft * FAR *,       /* literal/length tree result */
-    inflate_huft * FAR *,       /* distance tree result */
-    z_stream *));               /* for zalloc, zfree functions */
-
-local int inflate_trees_fixed OF((
-    uIntf *,                    /* literal desired/actual bit depth */
-    uIntf *,                    /* distance desired/actual bit depth */
-    inflate_huft * FAR *,       /* literal/length tree result */
-    inflate_huft * FAR *));     /* distance tree result */
-
-local int inflate_trees_free OF((
-    inflate_huft *,             /* tables to free */
-    z_stream *));               /* for zfree function */
-
-
-/*+++++*/
-/* infcodes.h -- header to use infcodes.c
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-struct inflate_codes_state;
-typedef struct inflate_codes_state FAR inflate_codes_statef;
-
-local inflate_codes_statef *inflate_codes_new OF((
-    uInt, uInt,
-    inflate_huft *, inflate_huft *,
-    z_stream *));
-
-local int inflate_codes OF((
-    inflate_blocks_statef *,
-    z_stream *,
-    int));
-
-local void inflate_codes_free OF((
-    inflate_codes_statef *,
-    z_stream *));
-
-
-/*+++++*/
-/* inflate.c -- zlib interface to inflate modules
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* inflate private state */
-struct internal_state {
-
-  /* mode */
-  enum {
-      METHOD,   /* waiting for method byte */
-      FLAG,     /* waiting for flag byte */
-      BLOCKS,   /* decompressing blocks */
-      CHECK4,   /* four check bytes to go */
-      CHECK3,   /* three check bytes to go */
-      CHECK2,   /* two check bytes to go */
-      CHECK1,   /* one check byte to go */
-      DONE,     /* finished check, done */
-      BAD}      /* got an error--stay here */
-    mode;               /* current inflate mode */
-
-  /* mode dependent information */
-  union {
-    uInt method;        /* if FLAGS, method byte */
-    struct {
-      uLong was;                /* computed check value */
-      uLong need;               /* stream check value */
-    } check;            /* if CHECK, check values to compare */
-    uInt marker;        /* if BAD, inflateSync's marker bytes count */
-  } sub;        /* submode */
-
-  /* mode independent information */
-  int  nowrap;          /* flag for no wrapper */
-  uInt wbits;           /* log2(window size)  (8..15, defaults to 15) */
-  inflate_blocks_statef 
-    *blocks;            /* current inflate_blocks state */
-
-};
-
-
-int inflateReset(
-	z_stream *z
-)
-{
-  uLong c;
-
-  if (z == Z_NULL || z->state == Z_NULL)
-    return Z_STREAM_ERROR;
-  z->total_in = z->total_out = 0;
-  z->msg = Z_NULL;
-  z->state->mode = z->state->nowrap ? BLOCKS : METHOD;
-  inflate_blocks_reset(z->state->blocks, z, &c);
-  Trace((stderr, "inflate: reset\n"));
-  return Z_OK;
-}
-
-
-int inflateEnd(
-	z_stream *z
-)
-{
-  uLong c;
-
-  if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL)
-    return Z_STREAM_ERROR;
-  if (z->state->blocks != Z_NULL)
-    inflate_blocks_free(z->state->blocks, z, &c);
-  ZFREE(z, z->state, sizeof(struct internal_state));
-  z->state = Z_NULL;
-  Trace((stderr, "inflate: end\n"));
-  return Z_OK;
-}
-
-
-int inflateInit2(
-	z_stream *z,
-	int w
-)
-{
-  /* initialize state */
-  if (z == Z_NULL)
-    return Z_STREAM_ERROR;
-/*  if (z->zalloc == Z_NULL) z->zalloc = zcalloc; */
-/*  if (z->zfree == Z_NULL) z->zfree = zcfree; */
-  if ((z->state = (struct internal_state FAR *)
-       ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL)
-    return Z_MEM_ERROR;
-  z->state->blocks = Z_NULL;
-
-  /* handle undocumented nowrap option (no zlib header or check) */
-  z->state->nowrap = 0;
-  if (w < 0)
-  {
-    w = - w;
-    z->state->nowrap = 1;
-  }
-
-  /* set window size */
-  if (w < 8 || w > 15)
-  {
-    inflateEnd(z);
-    return Z_STREAM_ERROR;
-  }
-  z->state->wbits = (uInt)w;
-
-  /* create inflate_blocks state */
-  if ((z->state->blocks =
-       inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, 1 << w))
-      == Z_NULL)
-  {
-    inflateEnd(z);
-    return Z_MEM_ERROR;
-  }
-  Trace((stderr, "inflate: allocated\n"));
-
-  /* reset state */
-  inflateReset(z);
-  return Z_OK;
-}
-
-
-int inflateInit(
-	z_stream *z
-)
-{
-  return inflateInit2(z, DEF_WBITS);
-}
-
-
-#define NEEDBYTE {if(z->avail_in==0)goto empty;r=Z_OK;}
-#define NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++)
-
-int inflate(
-	z_stream *z,
-	int f	
-)
-{
-  int r;
-  uInt b;
-
-  if (z == Z_NULL || z->next_in == Z_NULL)
-    return Z_STREAM_ERROR;
-  r = Z_BUF_ERROR;
-  while (1) switch (z->state->mode)
-  {
-    case METHOD:
-      NEEDBYTE
-      if (((z->state->sub.method = NEXTBYTE) & 0xf) != DEFLATED)
-      {
-        z->state->mode = BAD;
-        z->msg = "unknown compression method";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      if ((z->state->sub.method >> 4) + 8 > z->state->wbits)
-      {
-        z->state->mode = BAD;
-        z->msg = "invalid window size";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      z->state->mode = FLAG;
-    case FLAG:
-      NEEDBYTE
-      if ((b = NEXTBYTE) & 0x20)
-      {
-        z->state->mode = BAD;
-        z->msg = "invalid reserved bit";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      if (((z->state->sub.method << 8) + b) % 31)
-      {
-        z->state->mode = BAD;
-        z->msg = "incorrect header check";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      Trace((stderr, "inflate: zlib header ok\n"));
-      z->state->mode = BLOCKS;
-    case BLOCKS:
-      r = inflate_blocks(z->state->blocks, z, r);
-      if (f == Z_PACKET_FLUSH && z->avail_in == 0 && z->avail_out != 0)
-	  r = inflate_packet_flush(z->state->blocks);
-      if (r == Z_DATA_ERROR)
-      {
-        z->state->mode = BAD;
-        z->state->sub.marker = 0;       /* can try inflateSync */
-        break;
-      }
-      if (r != Z_STREAM_END)
-        return r;
-      r = Z_OK;
-      inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was);
-      if (z->state->nowrap)
-      {
-        z->state->mode = DONE;
-        break;
-      }
-      z->state->mode = CHECK4;
-    case CHECK4:
-      NEEDBYTE
-      z->state->sub.check.need = (uLong)NEXTBYTE << 24;
-      z->state->mode = CHECK3;
-    case CHECK3:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE << 16;
-      z->state->mode = CHECK2;
-    case CHECK2:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE << 8;
-      z->state->mode = CHECK1;
-    case CHECK1:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE;
-
-      if (z->state->sub.check.was != z->state->sub.check.need)
-      {
-        z->state->mode = BAD;
-        z->msg = "incorrect data check";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      Trace((stderr, "inflate: zlib check ok\n"));
-      z->state->mode = DONE;
-    case DONE:
-      return Z_STREAM_END;
-    case BAD:
-      return Z_DATA_ERROR;
-    default:
-      return Z_STREAM_ERROR;
-  }
-
- empty:
-  if (f != Z_PACKET_FLUSH)
-    return r;
-  z->state->mode = BAD;
-  z->state->sub.marker = 0;       /* can try inflateSync */
-  return Z_DATA_ERROR;
-}
-
-/*
- * This subroutine adds the data at next_in/avail_in to the output history
- * without performing any output.  The output buffer must be "caught up";
- * i.e. no pending output (hence s->read equals s->write), and the state must
- * be BLOCKS (i.e. we should be willing to see the start of a series of
- * BLOCKS).  On exit, the output will also be caught up, and the checksum
- * will have been updated if need be.
- */
-
-int inflateIncomp(
-	z_stream *z
-)
-{
-    if (z->state->mode != BLOCKS)
-	return Z_DATA_ERROR;
-    return inflate_addhistory(z->state->blocks, z);
-}
-
-
-int inflateSync(
-	z_stream *z
-)
-{
-  uInt n;       /* number of bytes to look at */
-  Bytef *p;     /* pointer to bytes */
-  uInt m;       /* number of marker bytes found in a row */
-  uLong r, w;   /* temporaries to save total_in and total_out */
-
-  /* set up */
-  if (z == Z_NULL || z->state == Z_NULL)
-    return Z_STREAM_ERROR;
-  if (z->state->mode != BAD)
-  {
-    z->state->mode = BAD;
-    z->state->sub.marker = 0;
-  }
-  if ((n = z->avail_in) == 0)
-    return Z_BUF_ERROR;
-  p = z->next_in;
-  m = z->state->sub.marker;
-
-  /* search */
-  while (n && m < 4)
-  {
-    if (*p == (Byte)(m < 2 ? 0 : 0xff))
-      m++;
-    else if (*p)
-      m = 0;
-    else
-      m = 4 - m;
-    p++, n--;
-  }
-
-  /* restore */
-  z->total_in += p - z->next_in;
-  z->next_in = p;
-  z->avail_in = n;
-  z->state->sub.marker = m;
-
-  /* return no joy or set up to restart on a new block */
-  if (m != 4)
-    return Z_DATA_ERROR;
-  r = z->total_in;  w = z->total_out;
-  inflateReset(z);
-  z->total_in = r;  z->total_out = w;
-  z->state->mode = BLOCKS;
-  return Z_OK;
-}
-
-#undef NEEDBYTE
-#undef NEXTBYTE
-
-/*+++++*/
-/* infutil.h -- types and macros common to blocks and codes
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* inflate blocks semi-private state */
-struct inflate_blocks_state {
-
-  /* mode */
-  enum {
-      TYPE,     /* get type bits (3, including end bit) */
-      LENS,     /* get lengths for stored */
-      STORED,   /* processing stored block */
-      TABLE,    /* get table lengths */
-      BTREE,    /* get bit lengths tree for a dynamic block */
-      DTREE,    /* get length, distance trees for a dynamic block */
-      CODES,    /* processing fixed or dynamic block */
-      DRY,      /* output remaining window bytes */
-      DONEB,     /* finished last block, done */
-      BADB}      /* got a data error--stuck here */
-    mode;               /* current inflate_block mode */
-
-  /* mode dependent information */
-  union {
-    uInt left;          /* if STORED, bytes left to copy */
-    struct {
-      uInt table;               /* table lengths (14 bits) */
-      uInt index;               /* index into blens (or border) */
-      uIntf *blens;             /* bit lengths of codes */
-      uInt bb;                  /* bit length tree depth */
-      inflate_huft *tb;         /* bit length decoding tree */
-      int nblens;		/* # elements allocated at blens */
-    } trees;            /* if DTREE, decoding info for trees */
-    struct {
-      inflate_huft *tl, *td;    /* trees to free */
-      inflate_codes_statef 
-         *codes;
-    } decode;           /* if CODES, current state */
-  } sub;                /* submode */
-  uInt last;            /* true if this block is the last block */
-
-  /* mode independent information */
-  uInt bitk;            /* bits in bit buffer */
-  uLong bitb;           /* bit buffer */
-  Bytef *window;        /* sliding window */
-  Bytef *end;           /* one byte after sliding window */
-  Bytef *read;          /* window read pointer */
-  Bytef *write;         /* window write pointer */
-  check_func checkfn;   /* check function */
-  uLong check;          /* check on output */
-
-};
-
-
-/* defines for inflate input/output */
-/*   update pointers and return */
-#define UPDBITS {s->bitb=b;s->bitk=k;}
-#define UPDIN {z->avail_in=n;z->total_in+=p-z->next_in;z->next_in=p;}
-#define UPDOUT {s->write=q;}
-#define UPDATE {UPDBITS UPDIN UPDOUT}
-#define LEAVE {UPDATE return inflate_flush(s,z,r);}
-/*   get bytes and bits */
-#define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;}
-#define NEEDBYTE {if(n)r=Z_OK;else LEAVE}
-#define NEXTBYTE (n--,*p++)
-#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<<k;k+=8;}}
-#define DUMPBITS(j) {b>>=(j);k-=(j);}
-/*   output bytes */
-#define WAVAIL (q<s->read?s->read-q-1:s->end-q)
-#define LOADOUT {q=s->write;m=WAVAIL;}
-#define WRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=WAVAIL;}}
-#define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT}
-#define NEEDOUT {if(m==0){WRAP if(m==0){FLUSH WRAP if(m==0) LEAVE}}r=Z_OK;}
-#define OUTBYTE(a) {*q++=(Byte)(a);m--;}
-/*   load local pointers */
-#define LOAD {LOADIN LOADOUT}
-
-/* And'ing with mask[n] masks the lower n bits */
-local uInt inflate_mask[] = {
-    0x0000,
-    0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff,
-    0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff
-};
-
-/* copy as much as possible from the sliding window to the output area */
-local int inflate_flush OF((
-    inflate_blocks_statef *,
-    z_stream *,
-    int));
-
-/*+++++*/
-/* inffast.h -- header to use inffast.c
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-local int inflate_fast OF((
-    uInt,
-    uInt,
-    inflate_huft *,
-    inflate_huft *,
-    inflate_blocks_statef *,
-    z_stream *));
-
-
-/*+++++*/
-/* infblock.c -- interpret and process block types to last block
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* Table for deflate from PKZIP's appnote.txt. */
-local uInt border[] = { /* Order of the bit length code lengths */
-        16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
-
-/*
-   Notes beyond the 1.93a appnote.txt:
-
-   1. Distance pointers never point before the beginning of the output
-      stream.
-   2. Distance pointers can point back across blocks, up to 32k away.
-   3. There is an implied maximum of 7 bits for the bit length table and
-      15 bits for the actual data.
-   4. If only one code exists, then it is encoded using one bit.  (Zero
-      would be more efficient, but perhaps a little confusing.)  If two
-      codes exist, they are coded using one bit each (0 and 1).
-   5. There is no way of sending zero distance codes--a dummy must be
-      sent if there are none.  (History: a pre 2.0 version of PKZIP would
-      store blocks with no distance codes, but this was discovered to be
-      too harsh a criterion.)  Valid only for 1.93a.  2.04c does allow
-      zero distance codes, which is sent as one code of zero bits in
-      length.
-   6. There are up to 286 literal/length codes.  Code 256 represents the
-      end-of-block.  Note however that the static length tree defines
-      288 codes just to fill out the Huffman codes.  Codes 286 and 287
-      cannot be used though, since there is no length base or extra bits
-      defined for them.  Similarily, there are up to 30 distance codes.
-      However, static trees define 32 codes (all 5 bits) to fill out the
-      Huffman codes, but the last two had better not show up in the data.
-   7. Unzip can check dynamic Huffman blocks for complete code sets.
-      The exception is that a single code would not be complete (see #4).
-   8. The five bits following the block type is really the number of
-      literal codes sent minus 257.
-   9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits
-      (1+6+6).  Therefore, to output three times the length, you output
-      three codes (1+1+1), whereas to output four times the same length,
-      you only need two codes (1+3).  Hmm.
-  10. In the tree reconstruction algorithm, Code = Code + Increment
-      only if BitLength(i) is not zero.  (Pretty obvious.)
-  11. Correction: 4 Bits: # of Bit Length codes - 4     (4 - 19)
-  12. Note: length code 284 can represent 227-258, but length code 285
-      really is 258.  The last length deserves its own, short code
-      since it gets used a lot in very redundant files.  The length
-      258 is special since 258 - 3 (the min match length) is 255.
-  13. The literal/length and distance code bit lengths are read as a
-      single stream of lengths.  It is possible (and advantageous) for
-      a repeat code (16, 17, or 18) to go across the boundary between
-      the two sets of lengths.
- */
-
-
-local void inflate_blocks_reset(
-	inflate_blocks_statef *s,
-	z_stream *z,
-	uLongf *c
-)
-{
-  if (s->checkfn != Z_NULL)
-    *c = s->check;
-  if (s->mode == BTREE || s->mode == DTREE)
-    ZFREE(z, s->sub.trees.blens, s->sub.trees.nblens * sizeof(uInt));
-  if (s->mode == CODES)
-  {
-    inflate_codes_free(s->sub.decode.codes, z);
-    inflate_trees_free(s->sub.decode.td, z);
-    inflate_trees_free(s->sub.decode.tl, z);
-  }
-  s->mode = TYPE;
-  s->bitk = 0;
-  s->bitb = 0;
-  s->read = s->write = s->window;
-  if (s->checkfn != Z_NULL)
-    s->check = (*s->checkfn)(0L, Z_NULL, 0);
-  Trace((stderr, "inflate:   blocks reset\n"));
-}
-
-
-local inflate_blocks_statef *inflate_blocks_new(
-	z_stream *z,
-	check_func c,
-	uInt w
-)
-{
-  inflate_blocks_statef *s;
-
-  if ((s = (inflate_blocks_statef *)ZALLOC
-       (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL)
-    return s;
-  if ((s->window = (Bytef *)ZALLOC(z, 1, w)) == Z_NULL)
-  {
-    ZFREE(z, s, sizeof(struct inflate_blocks_state));
-    return Z_NULL;
-  }
-  s->end = s->window + w;
-  s->checkfn = c;
-  s->mode = TYPE;
-  Trace((stderr, "inflate:   blocks allocated\n"));
-  inflate_blocks_reset(s, z, &s->check);
-  return s;
-}
-
-
-local int inflate_blocks(
-	inflate_blocks_statef *s,
-	z_stream *z,
-	int r
-)
-{
-  uInt t;               /* temporary storage */
-  uLong b;              /* bit buffer */
-  uInt k;               /* bits in bit buffer */
-  Bytef *p;             /* input data pointer */
-  uInt n;               /* bytes available there */
-  Bytef *q;             /* output window write pointer */
-  uInt m;               /* bytes to end of window or read pointer */
-
-  /* copy input/output information to locals (UPDATE macro restores) */
-  LOAD
-
-  /* process input based on current state */
-  while (1) switch (s->mode)
-  {
-    case TYPE:
-      NEEDBITS(3)
-      t = (uInt)b & 7;
-      s->last = t & 1;
-      switch (t >> 1)
-      {
-        case 0:                         /* stored */
-          Trace((stderr, "inflate:     stored block%s\n",
-                 s->last ? " (last)" : ""));
-          DUMPBITS(3)
-          t = k & 7;                    /* go to byte boundary */
-          DUMPBITS(t)
-          s->mode = LENS;               /* get length of stored block */
-          break;
-        case 1:                         /* fixed */
-          Trace((stderr, "inflate:     fixed codes block%s\n",
-                 s->last ? " (last)" : ""));
-          {
-            uInt bl, bd;
-            inflate_huft *tl, *td;
-
-            inflate_trees_fixed(&bl, &bd, &tl, &td);
-            s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z);
-            if (s->sub.decode.codes == Z_NULL)
-            {
-              r = Z_MEM_ERROR;
-              LEAVE
-            }
-            s->sub.decode.tl = Z_NULL;  /* don't try to free these */
-            s->sub.decode.td = Z_NULL;
-          }
-          DUMPBITS(3)
-          s->mode = CODES;
-          break;
-        case 2:                         /* dynamic */
-          Trace((stderr, "inflate:     dynamic codes block%s\n",
-                 s->last ? " (last)" : ""));
-          DUMPBITS(3)
-          s->mode = TABLE;
-          break;
-        case 3:                         /* illegal */
-          DUMPBITS(3)
-          s->mode = BADB;
-          z->msg = "invalid block type";
-          r = Z_DATA_ERROR;
-          LEAVE
-      }
-      break;
-    case LENS:
-      NEEDBITS(32)
-      if (((~b) >> 16) != (b & 0xffff))
-      {
-        s->mode = BADB;
-        z->msg = "invalid stored block lengths";
-        r = Z_DATA_ERROR;
-        LEAVE
-      }
-      s->sub.left = (uInt)b & 0xffff;
-      b = k = 0;                      /* dump bits */
-      Tracev((stderr, "inflate:       stored length %u\n", s->sub.left));
-      s->mode = s->sub.left ? STORED : TYPE;
-      break;
-    case STORED:
-      if (n == 0)
-        LEAVE
-      NEEDOUT
-      t = s->sub.left;
-      if (t > n) t = n;
-      if (t > m) t = m;
-      zmemcpy(q, p, t);
-      p += t;  n -= t;
-      q += t;  m -= t;
-      if ((s->sub.left -= t) != 0)
-        break;
-      Tracev((stderr, "inflate:       stored end, %lu total out\n",
-              z->total_out + (q >= s->read ? q - s->read :
-              (s->end - s->read) + (q - s->window))));
-      s->mode = s->last ? DRY : TYPE;
-      break;
-    case TABLE:
-      NEEDBITS(14)
-      s->sub.trees.table = t = (uInt)b & 0x3fff;
-#ifndef PKZIP_BUG_WORKAROUND
-      if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29)
-      {
-        s->mode = BADB;
-        z->msg = "too many length or distance symbols";
-        r = Z_DATA_ERROR;
-        LEAVE
-      }
-#endif
-      t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f);
-      if (t < 19)
-        t = 19;
-      if ((s->sub.trees.blens = (uIntf*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL)
-      {
-        r = Z_MEM_ERROR;
-        LEAVE
-      }
-      s->sub.trees.nblens = t;
-      DUMPBITS(14)
-      s->sub.trees.index = 0;
-      Tracev((stderr, "inflate:       table sizes ok\n"));
-      s->mode = BTREE;
-    case BTREE:
-      while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10))
-      {
-        NEEDBITS(3)
-        s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7;
-        DUMPBITS(3)
-      }
-      while (s->sub.trees.index < 19)
-        s->sub.trees.blens[border[s->sub.trees.index++]] = 0;
-      s->sub.trees.bb = 7;
-      t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb,
-                             &s->sub.trees.tb, z);
-      if (t != Z_OK)
-      {
-        r = t;
-        if (r == Z_DATA_ERROR)
-          s->mode = BADB;
-        LEAVE
-      }
-      s->sub.trees.index = 0;
-      Tracev((stderr, "inflate:       bits tree ok\n"));
-      s->mode = DTREE;
-    case DTREE:
-      while (t = s->sub.trees.table,
-             s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f))
-      {
-        inflate_huft *h;
-        uInt i, j, c;
-
-        t = s->sub.trees.bb;
-        NEEDBITS(t)
-        h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]);
-        t = h->word.what.Bits;
-        c = h->more.Base;
-        if (c < 16)
-        {
-          DUMPBITS(t)
-          s->sub.trees.blens[s->sub.trees.index++] = c;
-        }
-        else /* c == 16..18 */
-        {
-          i = c == 18 ? 7 : c - 14;
-          j = c == 18 ? 11 : 3;
-          NEEDBITS(t + i)
-          DUMPBITS(t)
-          j += (uInt)b & inflate_mask[i];
-          DUMPBITS(i)
-          i = s->sub.trees.index;
-          t = s->sub.trees.table;
-          if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) ||
-              (c == 16 && i < 1))
-          {
-            s->mode = BADB;
-            z->msg = "invalid bit length repeat";
-            r = Z_DATA_ERROR;
-            LEAVE
-          }
-          c = c == 16 ? s->sub.trees.blens[i - 1] : 0;
-          do {
-            s->sub.trees.blens[i++] = c;
-          } while (--j);
-          s->sub.trees.index = i;
-        }
-      }
-      inflate_trees_free(s->sub.trees.tb, z);
-      s->sub.trees.tb = Z_NULL;
-      {
-        uInt bl, bd;
-        inflate_huft *tl, *td;
-        inflate_codes_statef *c;
-
-        bl = 9;         /* must be <= 9 for lookahead assumptions */
-        bd = 6;         /* must be <= 9 for lookahead assumptions */
-        t = s->sub.trees.table;
-        t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f),
-                                  s->sub.trees.blens, &bl, &bd, &tl, &td, z);
-        if (t != Z_OK)
-        {
-          if (t == (uInt)Z_DATA_ERROR)
-            s->mode = BADB;
-          r = t;
-          LEAVE
-        }
-        Tracev((stderr, "inflate:       trees ok\n"));
-        if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL)
-        {
-          inflate_trees_free(td, z);
-          inflate_trees_free(tl, z);
-          r = Z_MEM_ERROR;
-          LEAVE
-        }
-        ZFREE(z, s->sub.trees.blens, s->sub.trees.nblens * sizeof(uInt));
-        s->sub.decode.codes = c;
-        s->sub.decode.tl = tl;
-        s->sub.decode.td = td;
-      }
-      s->mode = CODES;
-    case CODES:
-      UPDATE
-      if ((r = inflate_codes(s, z, r)) != Z_STREAM_END)
-        return inflate_flush(s, z, r);
-      r = Z_OK;
-      inflate_codes_free(s->sub.decode.codes, z);
-      inflate_trees_free(s->sub.decode.td, z);
-      inflate_trees_free(s->sub.decode.tl, z);
-      LOAD
-      Tracev((stderr, "inflate:       codes end, %lu total out\n",
-              z->total_out + (q >= s->read ? q - s->read :
-              (s->end - s->read) + (q - s->window))));
-      if (!s->last)
-      {
-        s->mode = TYPE;
-        break;
-      }
-      if (k > 7)              /* return unused byte, if any */
-      {
-        Assert(k < 16, "inflate_codes grabbed too many bytes")
-        k -= 8;
-        n++;
-        p--;                    /* can always return one */
-      }
-      s->mode = DRY;
-    case DRY:
-      FLUSH
-      if (s->read != s->write)
-        LEAVE
-      s->mode = DONEB;
-    case DONEB:
-      r = Z_STREAM_END;
-      LEAVE
-    case BADB:
-      r = Z_DATA_ERROR;
-      LEAVE
-    default:
-      r = Z_STREAM_ERROR;
-      LEAVE
-  }
-}
-
-
-local int inflate_blocks_free(
-	inflate_blocks_statef *s,
-	z_stream *z,
-	uLongf *c
-)
-{
-  inflate_blocks_reset(s, z, c);
-  ZFREE(z, s->window, s->end - s->window);
-  ZFREE(z, s, sizeof(struct inflate_blocks_state));
-  Trace((stderr, "inflate:   blocks freed\n"));
-  return Z_OK;
-}
-
-/*
- * This subroutine adds the data at next_in/avail_in to the output history
- * without performing any output.  The output buffer must be "caught up";
- * i.e. no pending output (hence s->read equals s->write), and the state must
- * be BLOCKS (i.e. we should be willing to see the start of a series of
- * BLOCKS).  On exit, the output will also be caught up, and the checksum
- * will have been updated if need be.
- */
-local int inflate_addhistory(
-	inflate_blocks_statef *s,
-	z_stream *z
-)
-{
-    uLong b;              /* bit buffer */  /* NOT USED HERE */
-    uInt k;               /* bits in bit buffer */ /* NOT USED HERE */
-    uInt t;               /* temporary storage */
-    Bytef *p;             /* input data pointer */
-    uInt n;               /* bytes available there */
-    Bytef *q;             /* output window write pointer */
-    uInt m;               /* bytes to end of window or read pointer */
-
-    if (s->read != s->write)
-	return Z_STREAM_ERROR;
-    if (s->mode != TYPE)
-	return Z_DATA_ERROR;
-
-    /* we're ready to rock */
-    LOAD
-    /* while there is input ready, copy to output buffer, moving
-     * pointers as needed.
-     */
-    while (n) {
-	t = n;  /* how many to do */
-	/* is there room until end of buffer? */
-	if (t > m) t = m;
-	/* update check information */
-	if (s->checkfn != Z_NULL)
-	    s->check = (*s->checkfn)(s->check, q, t);
-	zmemcpy(q, p, t);
-	q += t;
-	p += t;
-	n -= t;
-	z->total_out += t;
-	s->read = q;    /* drag read pointer forward */
-/*      WRAP  */ 	/* expand WRAP macro by hand to handle s->read */
-	if (q == s->end) {
-	    s->read = q = s->window;
-	    m = WAVAIL;
-	}
-    }
-    UPDATE
-    return Z_OK;
-}
-
-
-/*
- * At the end of a Deflate-compressed PPP packet, we expect to have seen
- * a `stored' block type value but not the (zero) length bytes.
- */
-local int inflate_packet_flush(
-	inflate_blocks_statef *s
-)
-{
-    if (s->mode != LENS)
-	return Z_DATA_ERROR;
-    s->mode = TYPE;
-    return Z_OK;
-}
-
-
-/*+++++*/
-/* inftrees.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-
-local int huft_build OF((
-    uIntf *,            /* code lengths in bits */
-    uInt,               /* number of codes */
-    uInt,               /* number of "simple" codes */
-    uIntf *,            /* list of base values for non-simple codes */
-    uIntf *,            /* list of extra bits for non-simple codes */
-    inflate_huft * FAR*,/* result: starting table */
-    uIntf *,            /* maximum lookup bits (returns actual) */
-    z_stream *));       /* for zalloc function */
-
-local voidpf falloc OF((
-    voidpf,             /* opaque pointer (not used) */
-    uInt,               /* number of items */
-    uInt));             /* size of item */
-
-local void ffree OF((
-    voidpf q,           /* opaque pointer (not used) */
-    voidpf p,           /* what to free (not used) */
-    uInt n));		/* number of bytes (not used) */
-
-/* Tables for deflate from PKZIP's appnote.txt. */
-local uInt cplens[] = { /* Copy lengths for literal codes 257..285 */
-        3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
-        35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
-        /* actually lengths - 2; also see note #13 above about 258 */
-local uInt cplext[] = { /* Extra bits for literal codes 257..285 */
-        0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2,
-        3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 192, 192}; /* 192==invalid */
-local uInt cpdist[] = { /* Copy offsets for distance codes 0..29 */
-        1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
-        257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
-        8193, 12289, 16385, 24577};
-local uInt cpdext[] = { /* Extra bits for distance codes */
-        0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6,
-        7, 7, 8, 8, 9, 9, 10, 10, 11, 11,
-        12, 12, 13, 13};
-
-/*
-   Huffman code decoding is performed using a multi-level table lookup.
-   The fastest way to decode is to simply build a lookup table whose
-   size is determined by the longest code.  However, the time it takes
-   to build this table can also be a factor if the data being decoded
-   is not very long.  The most common codes are necessarily the
-   shortest codes, so those codes dominate the decoding time, and hence
-   the speed.  The idea is you can have a shorter table that decodes the
-   shorter, more probable codes, and then point to subsidiary tables for
-   the longer codes.  The time it costs to decode the longer codes is
-   then traded against the time it takes to make longer tables.
-
-   This results of this trade are in the variables lbits and dbits
-   below.  lbits is the number of bits the first level table for literal/
-   length codes can decode in one step, and dbits is the same thing for
-   the distance codes.  Subsequent tables are also less than or equal to
-   those sizes.  These values may be adjusted either when all of the
-   codes are shorter than that, in which case the longest code length in
-   bits is used, or when the shortest code is *longer* than the requested
-   table size, in which case the length of the shortest code in bits is
-   used.
-
-   There are two different values for the two tables, since they code a
-   different number of possibilities each.  The literal/length table
-   codes 286 possible values, or in a flat code, a little over eight
-   bits.  The distance table codes 30 possible values, or a little less
-   than five bits, flat.  The optimum values for speed end up being
-   about one bit more than those, so lbits is 8+1 and dbits is 5+1.
-   The optimum values may differ though from machine to machine, and
-   possibly even between compilers.  Your mileage may vary.
- */
-
-
-/* If BMAX needs to be larger than 16, then h and x[] should be uLong. */
-#define BMAX 15         /* maximum bit length of any code */
-#define N_MAX 288       /* maximum number of codes in any set */
-
-#ifdef DEBUG_ZLIB
-  uInt inflate_hufts;
-#endif
-
-local int huft_build(
-	uIntf *b,               /* code lengths in bits (all assumed <= BMAX) */
-	uInt n,                 /* number of codes (assumed <= N_MAX) */
-	uInt s,                 /* number of simple-valued codes (0..s-1) */
-	uIntf *d,               /* list of base values for non-simple codes */
-	uIntf *e,               /* list of extra bits for non-simple codes */
-	inflate_huft * FAR *t,  /* result: starting table */
-	uIntf *m,               /* maximum lookup bits, returns actual */
-	z_stream *zs            /* for zalloc function */
-)
-/* Given a list of code lengths and a maximum table size, make a set of
-   tables to decode that set of codes.  Return Z_OK on success, Z_BUF_ERROR
-   if the given code set is incomplete (the tables are still built in this
-   case), Z_DATA_ERROR if the input is invalid (all zero length codes or an
-   over-subscribed set of lengths), or Z_MEM_ERROR if not enough memory. */
-{
-
-  uInt a;                       /* counter for codes of length k */
-  uInt c[BMAX+1];               /* bit length count table */
-  uInt f;                       /* i repeats in table every f entries */
-  int g;                        /* maximum code length */
-  int h;                        /* table level */
-  register uInt i;              /* counter, current code */
-  register uInt j;              /* counter */
-  register int k;               /* number of bits in current code */
-  int l;                        /* bits per table (returned in m) */
-  register uIntf *p;            /* pointer into c[], b[], or v[] */
-  inflate_huft *q;              /* points to current table */
-  struct inflate_huft_s r;      /* table entry for structure assignment */
-  inflate_huft *u[BMAX];        /* table stack */
-  uInt v[N_MAX];                /* values in order of bit length */
-  register int w;               /* bits before this table == (l * h) */
-  uInt x[BMAX+1];               /* bit offsets, then code stack */
-  uIntf *xp;                    /* pointer into x */
-  int y;                        /* number of dummy codes added */
-  uInt z;                       /* number of entries in current table */
-
-
-  /* Generate counts for each bit length */
-  p = c;
-#define C0 *p++ = 0;
-#define C2 C0 C0 C0 C0
-#define C4 C2 C2 C2 C2
-  C4                            /* clear c[]--assume BMAX+1 is 16 */
-  p = b;  i = n;
-  do {
-    c[*p++]++;                  /* assume all entries <= BMAX */
-  } while (--i);
-  if (c[0] == n)                /* null input--all zero length codes */
-  {
-    *t = (inflate_huft *)Z_NULL;
-    *m = 0;
-    return Z_DATA_ERROR;
-  }
-
-
-  /* Find minimum and maximum length, bound *m by those */
-  l = *m;
-  for (j = 1; j <= BMAX; j++)
-    if (c[j])
-      break;
-  k = j;                        /* minimum code length */
-  if ((uInt)l < j)
-    l = j;
-  for (i = BMAX; i; i--)
-    if (c[i])
-      break;
-  g = i;                        /* maximum code length */
-  if ((uInt)l > i)
-    l = i;
-  *m = l;
-
-
-  /* Adjust last length count to fill out codes, if needed */
-  for (y = 1 << j; j < i; j++, y <<= 1)
-    if ((y -= c[j]) < 0)
-      return Z_DATA_ERROR;
-  if ((y -= c[i]) < 0)
-    return Z_DATA_ERROR;
-  c[i] += y;
-
-
-  /* Generate starting offsets into the value table for each length */
-  x[1] = j = 0;
-  p = c + 1;  xp = x + 2;
-  while (--i) {                 /* note that i == g from above */
-    *xp++ = (j += *p++);
-  }
-
-
-  /* Make a table of values in order of bit lengths */
-  p = b;  i = 0;
-  do {
-    if ((j = *p++) != 0)
-      v[x[j]++] = i;
-  } while (++i < n);
-  n = x[g];			/* set n to length of v */
-
-
-  /* Generate the Huffman codes and for each, make the table entries */
-  x[0] = i = 0;                 /* first Huffman code is zero */
-  p = v;                        /* grab values in bit order */
-  h = -1;                       /* no tables yet--level -1 */
-  w = -l;                       /* bits decoded == (l * h) */
-  u[0] = (inflate_huft *)Z_NULL;        /* just to keep compilers happy */
-  q = (inflate_huft *)Z_NULL;   /* ditto */
-  z = 0;                        /* ditto */
-
-  /* go through the bit lengths (k already is bits in shortest code) */
-  for (; k <= g; k++)
-  {
-    a = c[k];
-    while (a--)
-    {
-      /* here i is the Huffman code of length k bits for value *p */
-      /* make tables up to required level */
-      while (k > w + l)
-      {
-        h++;
-        w += l;                 /* previous table always l bits */
-
-        /* compute minimum size table less than or equal to l bits */
-        z = (z = g - w) > (uInt)l ? l : z;      /* table size upper limit */
-        if ((f = 1 << (j = k - w)) > a + 1)     /* try a k-w bit table */
-        {                       /* too few codes for k-w bit table */
-          f -= a + 1;           /* deduct codes from patterns left */
-          xp = c + k;
-          if (j < z)
-            while (++j < z)     /* try smaller tables up to z bits */
-            {
-              if ((f <<= 1) <= *++xp)
-                break;          /* enough codes to use up j bits */
-              f -= *xp;         /* else deduct codes from patterns */
-            }
-        }
-        z = 1 << j;             /* table entries for j-bit table */
-
-        /* allocate and link in new table */
-        if ((q = (inflate_huft *)ZALLOC
-             (zs,z + 1,sizeof(inflate_huft))) == Z_NULL)
-        {
-          if (h)
-            inflate_trees_free(u[0], zs);
-          return Z_MEM_ERROR;   /* not enough memory */
-        }
-	q->word.Nalloc = z + 1;
-#ifdef DEBUG_ZLIB
-        inflate_hufts += z + 1;
-#endif
-        *t = q + 1;             /* link to list for huft_free() */
-        *(t = &(q->next)) = Z_NULL;
-        u[h] = ++q;             /* table starts after link */
-
-        /* connect to last table, if there is one */
-        if (h)
-        {
-          x[h] = i;             /* save pattern for backing up */
-          r.bits = (Byte)l;     /* bits to dump before this table */
-          r.exop = (Byte)j;     /* bits in this table */
-          r.next = q;           /* pointer to this table */
-          j = i >> (w - l);     /* (get around Turbo C bug) */
-          u[h-1][j] = r;        /* connect to last table */
-        }
-      }
-
-      /* set up table entry in r */
-      r.bits = (Byte)(k - w);
-      if (p >= v + n)
-        r.exop = 128 + 64;      /* out of values--invalid code */
-      else if (*p < s)
-      {
-        r.exop = (Byte)(*p < 256 ? 0 : 32 + 64);     /* 256 is end-of-block */
-        r.base = *p++;          /* simple code is just the value */
-      }
-      else
-      {
-        r.exop = (Byte)e[*p - s] + 16 + 64; /* non-simple--look up in lists */
-        r.base = d[*p++ - s];
-      }
-
-      /* fill code-like entries with r */
-      f = 1 << (k - w);
-      for (j = i >> w; j < z; j += f)
-        q[j] = r;
-
-      /* backwards increment the k-bit code i */
-      for (j = 1 << (k - 1); i & j; j >>= 1)
-        i ^= j;
-      i ^= j;
-
-      /* backup over finished tables */
-      while ((i & ((1 << w) - 1)) != x[h])
-      {
-        h--;                    /* don't need to update q */
-        w -= l;
-      }
-    }
-  }
-
-
-  /* Return Z_BUF_ERROR if we were given an incomplete table */
-  return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK;
-}
-
-
-local int inflate_trees_bits(
-	uIntf *c,               /* 19 code lengths */
-	uIntf *bb,              /* bits tree desired/actual depth */
-	inflate_huft * FAR *tb, /* bits tree result */
-	z_stream *z             /* for zfree function */
-)
-{
-  int r;
-
-  r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL, tb, bb, z);
-  if (r == Z_DATA_ERROR)
-    z->msg = "oversubscribed dynamic bit lengths tree";
-  else if (r == Z_BUF_ERROR)
-  {
-    inflate_trees_free(*tb, z);
-    z->msg = "incomplete dynamic bit lengths tree";
-    r = Z_DATA_ERROR;
-  }
-  return r;
-}
-
-
-local int inflate_trees_dynamic(
-	uInt nl,                /* number of literal/length codes */
-	uInt nd,                /* number of distance codes */
-	uIntf *c,               /* that many (total) code lengths */
-	uIntf *bl,              /* literal desired/actual bit depth */
-	uIntf *bd,              /* distance desired/actual bit depth */
-	inflate_huft * FAR *tl, /* literal/length tree result */
-	inflate_huft * FAR *td, /* distance tree result */
-	z_stream *z             /* for zfree function */
-)
-{
-  int r;
-
-  /* build literal/length tree */
-  if ((r = huft_build(c, nl, 257, cplens, cplext, tl, bl, z)) != Z_OK)
-  {
-    if (r == Z_DATA_ERROR)
-      z->msg = "oversubscribed literal/length tree";
-    else if (r == Z_BUF_ERROR)
-    {
-      inflate_trees_free(*tl, z);
-      z->msg = "incomplete literal/length tree";
-      r = Z_DATA_ERROR;
-    }
-    return r;
-  }
-
-  /* build distance tree */
-  if ((r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, z)) != Z_OK)
-  {
-    if (r == Z_DATA_ERROR)
-      z->msg = "oversubscribed literal/length tree";
-    else if (r == Z_BUF_ERROR) {
-#ifdef PKZIP_BUG_WORKAROUND
-      r = Z_OK;
-    }
-#else
-      inflate_trees_free(*td, z);
-      z->msg = "incomplete literal/length tree";
-      r = Z_DATA_ERROR;
-    }
-    inflate_trees_free(*tl, z);
-    return r;
-#endif
-  }
-
-  /* done */
-  return Z_OK;
-}
-
-
-/* build fixed tables only once--keep them here */
-local int fixed_lock = 0;
-local int fixed_built = 0;
-#define FIXEDH 530      /* number of hufts used by fixed tables */
-local uInt fixed_left = FIXEDH;
-local inflate_huft fixed_mem[FIXEDH];
-local uInt fixed_bl;
-local uInt fixed_bd;
-local inflate_huft *fixed_tl;
-local inflate_huft *fixed_td;
-
-
-local voidpf falloc(
-	voidpf q,       /* opaque pointer (not used) */
-	uInt n,         /* number of items */
-	uInt s          /* size of item */
-)
-{
-  Assert(s == sizeof(inflate_huft) && n <= fixed_left,
-         "inflate_trees falloc overflow");
-  if (q) s++; /* to make some compilers happy */
-  fixed_left -= n;
-  return (voidpf)(fixed_mem + fixed_left);
-}
-
-
-local void ffree(
-	voidpf q,
-	voidpf p,
-	uInt n
-)
-{
-  Assert(0, "inflate_trees ffree called!");
-  if (q) q = p; /* to make some compilers happy */
-}
-
-
-local int inflate_trees_fixed(
-	uIntf *bl,               /* literal desired/actual bit depth */
-	uIntf *bd,               /* distance desired/actual bit depth */
-	inflate_huft * FAR *tl,  /* literal/length tree result */
-	inflate_huft * FAR *td   /* distance tree result */
-)
-{
-  /* build fixed tables if not built already--lock out other instances */
-  while (++fixed_lock > 1)
-    fixed_lock--;
-  if (!fixed_built)
-  {
-    int k;              /* temporary variable */
-    unsigned c[288];    /* length list for huft_build */
-    z_stream z;         /* for falloc function */
-
-    /* set up fake z_stream for memory routines */
-    z.zalloc = falloc;
-    z.zfree = ffree;
-    z.opaque = Z_NULL;
-
-    /* literal table */
-    for (k = 0; k < 144; k++)
-      c[k] = 8;
-    for (; k < 256; k++)
-      c[k] = 9;
-    for (; k < 280; k++)
-      c[k] = 7;
-    for (; k < 288; k++)
-      c[k] = 8;
-    fixed_bl = 7;
-    huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl, &z);
-
-    /* distance table */
-    for (k = 0; k < 30; k++)
-      c[k] = 5;
-    fixed_bd = 5;
-    huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd, &z);
-
-    /* done */
-    fixed_built = 1;
-  }
-  fixed_lock--;
-  *bl = fixed_bl;
-  *bd = fixed_bd;
-  *tl = fixed_tl;
-  *td = fixed_td;
-  return Z_OK;
-}
-
-
-local int inflate_trees_free(
-	inflate_huft *t,        /* table to free */
-	z_stream *z             /* for zfree function */
-)
-/* Free the malloc'ed tables built by huft_build(), which makes a linked
-   list of the tables it made, with the links in a dummy first entry of
-   each table. */
-{
-  register inflate_huft *p, *q;
-
-  /* Go through linked list, freeing from the malloced (t[-1]) address. */
-  p = t;
-  while (p != Z_NULL)
-  {
-    q = (--p)->next;
-    ZFREE(z, p, p->word.Nalloc * sizeof(inflate_huft));
-    p = q;
-  } 
-  return Z_OK;
-}
-
-/*+++++*/
-/* infcodes.c -- process literals and length/distance pairs
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-/* inflate codes private state */
-struct inflate_codes_state {
-
-  /* mode */
-  enum {        /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
-      START,    /* x: set up for LEN */
-      LEN,      /* i: get length/literal/eob next */
-      LENEXT,   /* i: getting length extra (have base) */
-      DIST,     /* i: get distance next */
-      DISTEXT,  /* i: getting distance extra */
-      COPY,     /* o: copying bytes in window, waiting for space */
-      LIT,      /* o: got literal, waiting for output space */
-      WASH,     /* o: got eob, possibly still output waiting */
-      END,      /* x: got eob and all data flushed */
-      BADCODE}  /* x: got error */
-    mode;               /* current inflate_codes mode */
-
-  /* mode dependent information */
-  uInt len;
-  union {
-    struct {
-      inflate_huft *tree;       /* pointer into tree */
-      uInt need;                /* bits needed */
-    } code;             /* if LEN or DIST, where in tree */
-    uInt lit;           /* if LIT, literal */
-    struct {
-      uInt get;                 /* bits to get for extra */
-      uInt dist;                /* distance back to copy from */
-    } copy;             /* if EXT or COPY, where and how much */
-  } sub;                /* submode */
-
-  /* mode independent information */
-  Byte lbits;           /* ltree bits decoded per branch */
-  Byte dbits;           /* dtree bits decoder per branch */
-  inflate_huft *ltree;          /* literal/length/eob tree */
-  inflate_huft *dtree;          /* distance tree */
-
-};
-
-
-local inflate_codes_statef *inflate_codes_new(
-	uInt bl,
-	uInt bd,
-	inflate_huft *tl,
-	inflate_huft *td,
-	z_stream *z
-)
-{
-  inflate_codes_statef *c;
-
-  if ((c = (inflate_codes_statef *)
-       ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL)
-  {
-    c->mode = START;
-    c->lbits = (Byte)bl;
-    c->dbits = (Byte)bd;
-    c->ltree = tl;
-    c->dtree = td;
-    Tracev((stderr, "inflate:       codes new\n"));
-  }
-  return c;
-}
-
-
-local int inflate_codes(
-	inflate_blocks_statef *s,
-	z_stream *z,
-	int r
-)
-{
-  uInt j;               /* temporary storage */
-  inflate_huft *t;      /* temporary pointer */
-  uInt e;               /* extra bits or operation */
-  uLong b;              /* bit buffer */
-  uInt k;               /* bits in bit buffer */
-  Bytef *p;             /* input data pointer */
-  uInt n;               /* bytes available there */
-  Bytef *q;             /* output window write pointer */
-  uInt m;               /* bytes to end of window or read pointer */
-  Bytef *f;             /* pointer to copy strings from */
-  inflate_codes_statef *c = s->sub.decode.codes;  /* codes state */
-
-  /* copy input/output information to locals (UPDATE macro restores) */
-  LOAD
-
-  /* process input and output based on current state */
-  while (1) switch (c->mode)
-  {             /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
-    case START:         /* x: set up for LEN */
-#ifndef SLOW
-      if (m >= 258 && n >= 10)
-      {
-        UPDATE
-        r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z);
-        LOAD
-        if (r != Z_OK)
-        {
-          c->mode = r == Z_STREAM_END ? WASH : BADCODE;
-          break;
-        }
-      }
-#endif /* !SLOW */
-      c->sub.code.need = c->lbits;
-      c->sub.code.tree = c->ltree;
-      c->mode = LEN;
-    case LEN:           /* i: get length/literal/eob next */
-      j = c->sub.code.need;
-      NEEDBITS(j)
-      t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
-      DUMPBITS(t->bits)
-      e = (uInt)(t->exop);
-      if (e == 0)               /* literal */
-      {
-        c->sub.lit = t->base;
-        Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
-                 "inflate:         literal '%c'\n" :
-                 "inflate:         literal 0x%02x\n", t->base));
-        c->mode = LIT;
-        break;
-      }
-      if (e & 16)               /* length */
-      {
-        c->sub.copy.get = e & 15;
-        c->len = t->base;
-        c->mode = LENEXT;
-        break;
-      }
-      if ((e & 64) == 0)        /* next table */
-      {
-        c->sub.code.need = e;
-        c->sub.code.tree = t->next;
-        break;
-      }
-      if (e & 32)               /* end of block */
-      {
-        Tracevv((stderr, "inflate:         end of block\n"));
-        c->mode = WASH;
-        break;
-      }
-      c->mode = BADCODE;        /* invalid code */
-      z->msg = "invalid literal/length code";
-      r = Z_DATA_ERROR;
-      LEAVE
-    case LENEXT:        /* i: getting length extra (have base) */
-      j = c->sub.copy.get;
-      NEEDBITS(j)
-      c->len += (uInt)b & inflate_mask[j];
-      DUMPBITS(j)
-      c->sub.code.need = c->dbits;
-      c->sub.code.tree = c->dtree;
-      Tracevv((stderr, "inflate:         length %u\n", c->len));
-      c->mode = DIST;
-    case DIST:          /* i: get distance next */
-      j = c->sub.code.need;
-      NEEDBITS(j)
-      t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
-      DUMPBITS(t->bits)
-      e = (uInt)(t->exop);
-      if (e & 16)               /* distance */
-      {
-        c->sub.copy.get = e & 15;
-        c->sub.copy.dist = t->base;
-        c->mode = DISTEXT;
-        break;
-      }
-      if ((e & 64) == 0)        /* next table */
-      {
-        c->sub.code.need = e;
-        c->sub.code.tree = t->next;
-        break;
-      }
-      c->mode = BADCODE;        /* invalid code */
-      z->msg = "invalid distance code";
-      r = Z_DATA_ERROR;
-      LEAVE
-    case DISTEXT:       /* i: getting distance extra */
-      j = c->sub.copy.get;
-      NEEDBITS(j)
-      c->sub.copy.dist += (uInt)b & inflate_mask[j];
-      DUMPBITS(j)
-      Tracevv((stderr, "inflate:         distance %u\n", c->sub.copy.dist));
-      c->mode = COPY;
-    case COPY:          /* o: copying bytes in window, waiting for space */
-#ifndef __TURBOC__ /* Turbo C bug for following expression */
-      f = (uInt)(q - s->window) < c->sub.copy.dist ?
-          s->end - (c->sub.copy.dist - (q - s->window)) :
-          q - c->sub.copy.dist;
-#else
-      f = q - c->sub.copy.dist;
-      if ((uInt)(q - s->window) < c->sub.copy.dist)
-        f = s->end - (c->sub.copy.dist - (q - s->window));
-#endif
-      while (c->len)
-      {
-        NEEDOUT
-        OUTBYTE(*f++)
-        if (f == s->end)
-          f = s->window;
-        c->len--;
-      }
-      c->mode = START;
-      break;
-    case LIT:           /* o: got literal, waiting for output space */
-      NEEDOUT
-      OUTBYTE(c->sub.lit)
-      c->mode = START;
-      break;
-    case WASH:          /* o: got eob, possibly more output */
-      FLUSH
-      if (s->read != s->write)
-        LEAVE
-      c->mode = END;
-    case END:
-      r = Z_STREAM_END;
-      LEAVE
-    case BADCODE:       /* x: got error */
-      r = Z_DATA_ERROR;
-      LEAVE
-    default:
-      r = Z_STREAM_ERROR;
-      LEAVE
-  }
-}
-
-
-local void inflate_codes_free(
-	inflate_codes_statef *c,
-	z_stream *z
-)
-{
-  ZFREE(z, c, sizeof(struct inflate_codes_state));
-  Tracev((stderr, "inflate:       codes free\n"));
-}
-
-/*+++++*/
-/* inflate_util.c -- data and routines common to blocks and codes
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* copy as much as possible from the sliding window to the output area */
-local int inflate_flush(
-	inflate_blocks_statef *s,
-	z_stream *z,
-	int r
-)
-{
-  uInt n;
-  Bytef *p, *q;
-
-  /* local copies of source and destination pointers */
-  p = z->next_out;
-  q = s->read;
-
-  /* compute number of bytes to copy as far as end of window */
-  n = (uInt)((q <= s->write ? s->write : s->end) - q);
-  if (n > z->avail_out) n = z->avail_out;
-  if (n && r == Z_BUF_ERROR) r = Z_OK;
-
-  /* update counters */
-  z->avail_out -= n;
-  z->total_out += n;
-
-  /* update check information */
-  if (s->checkfn != Z_NULL)
-    s->check = (*s->checkfn)(s->check, q, n);
-
-  /* copy as far as end of window */
-  zmemcpy(p, q, n);
-  p += n;
-  q += n;
-
-  /* see if more to copy at beginning of window */
-  if (q == s->end)
-  {
-    /* wrap pointers */
-    q = s->window;
-    if (s->write == s->end)
-      s->write = s->window;
-
-    /* compute bytes to copy */
-    n = (uInt)(s->write - q);
-    if (n > z->avail_out) n = z->avail_out;
-    if (n && r == Z_BUF_ERROR) r = Z_OK;
-
-    /* update counters */
-    z->avail_out -= n;
-    z->total_out += n;
-
-    /* update check information */
-    if (s->checkfn != Z_NULL)
-      s->check = (*s->checkfn)(s->check, q, n);
-
-    /* copy */
-    zmemcpy(p, q, n);
-    p += n;
-    q += n;
-  }
-
-  /* update pointers */
-  z->next_out = p;
-  s->read = q;
-
-  /* done */
-  return r;
-}
-
-
-/*+++++*/
-/* inffast.c -- process literals and length/distance pairs fast
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-/* macros for bit input with no checking and for returning unused bytes */
-#define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<<k;k+=8;}}
-#define UNGRAB {n+=(c=k>>3);p-=c;k&=7;}
-
-/* Called with number of bytes left to write in window at least 258
-   (the maximum string length) and number of input bytes available
-   at least ten.  The ten bytes are six bytes for the longest length/
-   distance pair plus four bytes for overloading the bit buffer. */
-
-local int inflate_fast(
-	uInt bl,
-	uInt bd,
-	inflate_huft *tl,
-	inflate_huft *td,
-	inflate_blocks_statef *s,
-	z_stream *z
-)
-{
-  inflate_huft *t;      /* temporary pointer */
-  uInt e;               /* extra bits or operation */
-  uLong b;              /* bit buffer */
-  uInt k;               /* bits in bit buffer */
-  Bytef *p;             /* input data pointer */
-  uInt n;               /* bytes available there */
-  Bytef *q;             /* output window write pointer */
-  uInt m;               /* bytes to end of window or read pointer */
-  uInt ml;              /* mask for literal/length tree */
-  uInt md;              /* mask for distance tree */
-  uInt c;               /* bytes to copy */
-  uInt d;               /* distance back to copy from */
-  Bytef *r;             /* copy source pointer */
-
-  /* load input, output, bit values */
-  LOAD
-
-  /* initialize masks */
-  ml = inflate_mask[bl];
-  md = inflate_mask[bd];
-
-  /* do until not enough input or output space for fast loop */
-  do {                          /* assume called with m >= 258 && n >= 10 */
-    /* get literal/length code */
-    GRABBITS(20)                /* max bits for literal/length code */
-    if ((e = (t = tl + ((uInt)b & ml))->exop) == 0)
-    {
-      DUMPBITS(t->bits)
-      Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
-                "inflate:         * literal '%c'\n" :
-                "inflate:         * literal 0x%02x\n", t->base));
-      *q++ = (Byte)t->base;
-      m--;
-      continue;
-    }
-    do {
-      DUMPBITS(t->bits)
-      if (e & 16)
-      {
-        /* get extra bits for length */
-        e &= 15;
-        c = t->base + ((uInt)b & inflate_mask[e]);
-        DUMPBITS(e)
-        Tracevv((stderr, "inflate:         * length %u\n", c));
-
-        /* decode distance base of block to copy */
-        GRABBITS(15);           /* max bits for distance code */
-        e = (t = td + ((uInt)b & md))->exop;
-        do {
-          DUMPBITS(t->bits)
-          if (e & 16)
-          {
-            /* get extra bits to add to distance base */
-            e &= 15;
-            GRABBITS(e)         /* get extra bits (up to 13) */
-            d = t->base + ((uInt)b & inflate_mask[e]);
-            DUMPBITS(e)
-            Tracevv((stderr, "inflate:         * distance %u\n", d));
-
-            /* do the copy */
-            m -= c;
-            if ((uInt)(q - s->window) >= d)     /* offset before dest */
-            {                                   /*  just copy */
-              r = q - d;
-              *q++ = *r++;  c--;        /* minimum count is three, */
-              *q++ = *r++;  c--;        /*  so unroll loop a little */
-            }
-            else                        /* else offset after destination */
-            {
-              e = d - (q - s->window);  /* bytes from offset to end */
-              r = s->end - e;           /* pointer to offset */
-              if (c > e)                /* if source crosses, */
-              {
-                c -= e;                 /* copy to end of window */
-                do {
-                  *q++ = *r++;
-                } while (--e);
-                r = s->window;          /* copy rest from start of window */
-              }
-            }
-            do {                        /* copy all or what's left */
-              *q++ = *r++;
-            } while (--c);
-            break;
-          }
-          else if ((e & 64) == 0)
-            e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop;
-          else
-          {
-            z->msg = "invalid distance code";
-            UNGRAB
-            UPDATE
-            return Z_DATA_ERROR;
-          }
-        } while (1);
-        break;
-      }
-      if ((e & 64) == 0)
-      {
-        if ((e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop) == 0)
-        {
-          DUMPBITS(t->bits)
-          Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
-                    "inflate:         * literal '%c'\n" :
-                    "inflate:         * literal 0x%02x\n", t->base));
-          *q++ = (Byte)t->base;
-          m--;
-          break;
-        }
-      }
-      else if (e & 32)
-      {
-        Tracevv((stderr, "inflate:         * end of block\n"));
-        UNGRAB
-        UPDATE
-        return Z_STREAM_END;
-      }
-      else
-      {
-        z->msg = "invalid literal/length code";
-        UNGRAB
-        UPDATE
-        return Z_DATA_ERROR;
-      }
-    } while (1);
-  } while (m >= 258 && n >= 10);
-
-  /* not enough input or output--restore pointers and return */
-  UNGRAB
-  UPDATE
-  return Z_OK;
-}
-
-
-/*+++++*/
-/* zutil.c -- target dependent utility functions for the compression library
- * Copyright (C) 1995 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* From: zutil.c,v 1.8 1995/05/03 17:27:12 jloup Exp */
-
-char *zlib_version = ZLIB_VERSION;
-
-char *z_errmsg[] = {
-"stream end",          /* Z_STREAM_END    1 */
-"",                    /* Z_OK            0 */
-"file error",          /* Z_ERRNO        (-1) */
-"stream error",        /* Z_STREAM_ERROR (-2) */
-"data error",          /* Z_DATA_ERROR   (-3) */
-"insufficient memory", /* Z_MEM_ERROR    (-4) */
-"buffer error",        /* Z_BUF_ERROR    (-5) */
-""};
-
-
-/*+++++*/
-/* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* From: adler32.c,v 1.6 1995/05/03 17:27:08 jloup Exp */
-
-#define BASE 65521L /* largest prime smaller than 65536 */
-#define NMAX 5552
-/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
-
-#define DO1(buf)  {s1 += *buf++; s2 += s1;}
-#define DO2(buf)  DO1(buf); DO1(buf);
-#define DO4(buf)  DO2(buf); DO2(buf);
-#define DO8(buf)  DO4(buf); DO4(buf);
-#define DO16(buf) DO8(buf); DO8(buf);
-
-/* ========================================================================= */
-uLong adler32(
-	uLong adler,
-	Bytef *buf,
-	uInt len
-)
-{
-    unsigned long s1 = adler & 0xffff;
-    unsigned long s2 = (adler >> 16) & 0xffff;
-    int k;
-
-    if (buf == Z_NULL) return 1L;
-
-    while (len > 0) {
-        k = len < NMAX ? len : NMAX;
-        len -= k;
-        while (k >= 16) {
-            DO16(buf);
-            k -= 16;
-        }
-        if (k != 0) do {
-            DO1(buf);
-        } while (--k);
-        s1 %= BASE;
-        s2 %= BASE;
-    }
-    return (s2 << 16) | s1;
-}
diff --git a/arch/ppc64/boot/zlib.h b/arch/ppc64/boot/zlib.h
deleted file mode 100644
index f0b996c6864f..000000000000
--- a/arch/ppc64/boot/zlib.h
+++ /dev/null
@@ -1,432 +0,0 @@
-/*		*/
-
-/*
- * This file is derived from zlib.h and zconf.h from the zlib-0.95
- * distribution by Jean-loup Gailly and Mark Adler, with some additions
- * by Paul Mackerras to aid in implementing Deflate compression and
- * decompression for PPP packets.
- */
-
-/*
- *  ==FILEVERSION 960122==
- *
- * This marker is used by the Linux installation script to determine
- * whether an up-to-date version of this file is already installed.
- */
-
-/* zlib.h -- interface of the 'zlib' general purpose compression library
-  version 0.95, Aug 16th, 1995.
-
-  Copyright (C) 1995 Jean-loup Gailly and Mark Adler
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the authors be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-
-  Jean-loup Gailly        Mark Adler
-  gzip@prep.ai.mit.edu    madler@alumni.caltech.edu
- */
-
-#ifndef _ZLIB_H
-#define _ZLIB_H
-
-/* #include "zconf.h" */	/* included directly here */
-
-/* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* From: zconf.h,v 1.12 1995/05/03 17:27:12 jloup Exp */
-
-/*
-     The library does not install any signal handler. It is recommended to
-  add at least a handler for SIGSEGV when decompressing; the library checks
-  the consistency of the input data whenever possible but may go nuts
-  for some forms of corrupted input.
- */
-
-/*
- * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
- * than 64k bytes at a time (needed on systems with 16-bit int).
- * Compile with -DUNALIGNED_OK if it is OK to access shorts or ints
- * at addresses which are not a multiple of their size.
- * Under DOS, -DFAR=far or -DFAR=__far may be needed.
- */
-
-#ifndef STDC
-#  if defined(MSDOS) || defined(__STDC__) || defined(__cplusplus)
-#    define STDC
-#  endif
-#endif
-
-#ifdef	__MWERKS__ /* Metrowerks CodeWarrior declares fileno() in unix.h */
-#  include <unix.h>
-#endif
-
-/* Maximum value for memLevel in deflateInit2 */
-#ifndef MAX_MEM_LEVEL
-#  ifdef MAXSEG_64K
-#    define MAX_MEM_LEVEL 8
-#  else
-#    define MAX_MEM_LEVEL 9
-#  endif
-#endif
-
-#ifndef FAR
-#  define FAR
-#endif
-
-/* Maximum value for windowBits in deflateInit2 and inflateInit2 */
-#ifndef MAX_WBITS
-#  define MAX_WBITS   15 /* 32K LZ77 window */
-#endif
-
-/* The memory requirements for deflate are (in bytes):
-            1 << (windowBits+2)   +  1 << (memLevel+9)
- that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
- plus a few kilobytes for small objects. For example, if you want to reduce
- the default memory requirements from 256K to 128K, compile with
-     make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
- Of course this will generally degrade compression (there's no free lunch).
-
-   The memory requirements for inflate are (in bytes) 1 << windowBits
- that is, 32K for windowBits=15 (default value) plus a few kilobytes
- for small objects.
-*/
-
-                        /* Type declarations */
-
-#ifndef OF /* function prototypes */
-#  ifdef STDC
-#    define OF(args)  args
-#  else
-#    define OF(args)  ()
-#  endif
-#endif
-
-typedef unsigned char  Byte;  /* 8 bits */
-typedef unsigned int   uInt;  /* 16 bits or more */
-typedef unsigned long  uLong; /* 32 bits or more */
-
-typedef Byte FAR Bytef;
-typedef char FAR charf;
-typedef int FAR intf;
-typedef uInt FAR uIntf;
-typedef uLong FAR uLongf;
-
-#ifdef STDC
-   typedef void FAR *voidpf;
-   typedef void     *voidp;
-#else
-   typedef Byte FAR *voidpf;
-   typedef Byte     *voidp;
-#endif
-
-/* end of original zconf.h */
-
-#define ZLIB_VERSION "0.95P"
-
-/* 
-     The 'zlib' compression library provides in-memory compression and
-  decompression functions, including integrity checks of the uncompressed
-  data.  This version of the library supports only one compression method
-  (deflation) but other algorithms may be added later and will have the same
-  stream interface.
-
-     For compression the application must provide the output buffer and
-  may optionally provide the input buffer for optimization. For decompression,
-  the application must provide the input buffer and may optionally provide
-  the output buffer for optimization.
-
-     Compression can be done in a single step if the buffers are large
-  enough (for example if an input file is mmap'ed), or can be done by
-  repeated calls of the compression function.  In the latter case, the
-  application must provide more input and/or consume the output
-  (providing more output space) before each call.
-*/
-
-typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
-typedef void   (*free_func)  OF((voidpf opaque, voidpf address, uInt nbytes));
-
-struct internal_state;
-
-typedef struct z_stream_s {
-    Bytef    *next_in;  /* next input byte */
-    uInt     avail_in;  /* number of bytes available at next_in */
-    uLong    total_in;  /* total nb of input bytes read so far */
-
-    Bytef    *next_out; /* next output byte should be put there */
-    uInt     avail_out; /* remaining free space at next_out */
-    uLong    total_out; /* total nb of bytes output so far */
-
-    char     *msg;      /* last error message, NULL if no error */
-    struct internal_state FAR *state; /* not visible by applications */
-
-    alloc_func zalloc;  /* used to allocate the internal state */
-    free_func  zfree;   /* used to free the internal state */
-    voidp      opaque;  /* private data object passed to zalloc and zfree */
-
-    Byte     data_type; /* best guess about the data type: ascii or binary */
-
-} z_stream;
-
-/*
-   The application must update next_in and avail_in when avail_in has
-   dropped to zero. It must update next_out and avail_out when avail_out
-   has dropped to zero. The application must initialize zalloc, zfree and
-   opaque before calling the init function. All other fields are set by the
-   compression library and must not be updated by the application.
-
-   The opaque value provided by the application will be passed as the first
-   parameter for calls of zalloc and zfree. This can be useful for custom
-   memory management. The compression library attaches no meaning to the
-   opaque value.
-
-   zalloc must return Z_NULL if there is not enough memory for the object.
-   On 16-bit systems, the functions zalloc and zfree must be able to allocate
-   exactly 65536 bytes, but will not be required to allocate more than this
-   if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
-   pointers returned by zalloc for objects of exactly 65536 bytes *must*
-   have their offset normalized to zero. The default allocation function
-   provided by this library ensures this (see zutil.c). To reduce memory
-   requirements and avoid any allocation of 64K objects, at the expense of
-   compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
-
-   The fields total_in and total_out can be used for statistics or
-   progress reports. After compression, total_in holds the total size of
-   the uncompressed data and may be saved for use in the decompressor
-   (particularly if the decompressor wants to decompress everything in
-   a single step).
-*/
-
-                        /* constants */
-
-#define Z_NO_FLUSH      0
-#define Z_PARTIAL_FLUSH 1
-#define Z_FULL_FLUSH    2
-#define Z_SYNC_FLUSH    3 /* experimental: partial_flush + byte align */
-#define Z_FINISH        4
-#define Z_PACKET_FLUSH	5
-/* See deflate() below for the usage of these constants */
-
-#define Z_OK            0
-#define Z_STREAM_END    1
-#define Z_ERRNO        (-1)
-#define Z_STREAM_ERROR (-2)
-#define Z_DATA_ERROR   (-3)
-#define Z_MEM_ERROR    (-4)
-#define Z_BUF_ERROR    (-5)
-/* error codes for the compression/decompression functions */
-
-#define Z_BEST_SPEED             1
-#define Z_BEST_COMPRESSION       9
-#define Z_DEFAULT_COMPRESSION  (-1)
-/* compression levels */
-
-#define Z_FILTERED            1
-#define Z_HUFFMAN_ONLY        2
-#define Z_DEFAULT_STRATEGY    0
-
-#define Z_BINARY   0
-#define Z_ASCII    1
-#define Z_UNKNOWN  2
-/* Used to set the data_type field */
-
-#define Z_NULL  0  /* for initializing zalloc, zfree, opaque */
-
-extern char *zlib_version;
-/* The application can compare zlib_version and ZLIB_VERSION for consistency.
-   If the first character differs, the library code actually used is
-   not compatible with the zlib.h header file used by the application.
- */
-
-                        /* basic functions */
-
-extern int inflateInit OF((z_stream *strm));
-/* 
-     Initializes the internal stream state for decompression. The fields
-   zalloc and zfree must be initialized before by the caller.  If zalloc and
-   zfree are set to Z_NULL, inflateInit updates them to use default allocation
-   functions.
-
-     inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory.  msg is set to null if there is no error message.
-   inflateInit does not perform any decompression: this will be done by
-   inflate().
-*/
-
-
-extern int inflate OF((z_stream *strm, int flush));
-/*
-  Performs one or both of the following actions:
-
-  - Decompress more input starting at next_in and update next_in and avail_in
-    accordingly. If not all input can be processed (because there is not
-    enough room in the output buffer), next_in is updated and processing
-    will resume at this point for the next call of inflate().
-
-  - Provide more output starting at next_out and update next_out and avail_out
-    accordingly.  inflate() always provides as much output as possible
-    (until there is no more input data or no more space in the output buffer).
-
-  Before the call of inflate(), the application should ensure that at least
-  one of the actions is possible, by providing more input and/or consuming
-  more output, and updating the next_* and avail_* values accordingly.
-  The application can consume the uncompressed output when it wants, for
-  example when the output buffer is full (avail_out == 0), or after each
-  call of inflate().
-
-    If the parameter flush is set to Z_PARTIAL_FLUSH or Z_PACKET_FLUSH,
-  inflate flushes as much output as possible to the output buffer. The
-  flushing behavior of inflate is not specified for values of the flush
-  parameter other than Z_PARTIAL_FLUSH, Z_PACKET_FLUSH or Z_FINISH, but the
-  current implementation actually flushes as much output as possible
-  anyway.  For Z_PACKET_FLUSH, inflate checks that once all the input data
-  has been consumed, it is expecting to see the length field of a stored
-  block; if not, it returns Z_DATA_ERROR.
-
-    inflate() should normally be called until it returns Z_STREAM_END or an
-  error. However if all decompression is to be performed in a single step
-  (a single call of inflate), the parameter flush should be set to
-  Z_FINISH. In this case all pending input is processed and all pending
-  output is flushed; avail_out must be large enough to hold all the
-  uncompressed data. (The size of the uncompressed data may have been saved
-  by the compressor for this purpose.) The next operation on this stream must
-  be inflateEnd to deallocate the decompression state. The use of Z_FINISH
-  is never required, but can be used to inform inflate that a faster routine
-  may be used for the single inflate() call.
-
-    inflate() returns Z_OK if some progress has been made (more input
-  processed or more output produced), Z_STREAM_END if the end of the
-  compressed data has been reached and all uncompressed output has been
-  produced, Z_DATA_ERROR if the input data was corrupted, Z_STREAM_ERROR if
-  the stream structure was inconsistent (for example if next_in or next_out
-  was NULL), Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR if no
-  progress is possible or if there was not enough room in the output buffer
-  when Z_FINISH is used. In the Z_DATA_ERROR case, the application may then
-  call inflateSync to look for a good compression block.  */
-
-
-extern int inflateEnd OF((z_stream *strm));
-/*
-     All dynamically allocated data structures for this stream are freed.
-   This function discards any unprocessed input and does not flush any
-   pending output.
-
-     inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
-   was inconsistent. In the error case, msg may be set but then points to a
-   static string (which must not be deallocated).
-*/
-
-                        /* advanced functions */
-
-extern int inflateInit2 OF((z_stream *strm,
-                            int  windowBits));
-/*   
-     This is another version of inflateInit with more compression options. The
-   fields next_out, zalloc and zfree must be initialized before by the caller.
-
-     The windowBits parameter is the base two logarithm of the maximum window
-   size (the size of the history buffer).  It should be in the range 8..15 for
-   this version of the library (the value 16 will be allowed soon). The
-   default value is 15 if inflateInit is used instead. If a compressed stream
-   with a larger window size is given as input, inflate() will return with
-   the error code Z_DATA_ERROR instead of trying to allocate a larger window.
-
-     If next_out is not null, the library will use this buffer for the history
-   buffer; the buffer must either be large enough to hold the entire output
-   data, or have at least 1<<windowBits bytes.  If next_out is null, the
-   library will allocate its own buffer (and leave next_out null). next_in
-   need not be provided here but must be provided by the application for the
-   next call of inflate().
-
-     If the history buffer is provided by the application, next_out must
-   never be changed by the application since the decompressor maintains
-   history information inside this buffer from call to call; the application
-   can only reset next_out to the beginning of the history buffer when
-   avail_out is zero and all output has been consumed.
-
-      inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
-   not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
-   windowBits < 8). msg is set to null if there is no error message.
-   inflateInit2 does not perform any decompression: this will be done by
-   inflate().
-*/
-
-extern int inflateSync OF((z_stream *strm));
-/* 
-    Skips invalid compressed data until the special marker (see deflate()
-  above) can be found, or until all available input is skipped. No output
-  is provided.
-
-    inflateSync returns Z_OK if the special marker has been found, Z_BUF_ERROR
-  if no more input was provided, Z_DATA_ERROR if no marker has been found,
-  or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
-  case, the application may save the current current value of total_in which
-  indicates where valid compressed data was found. In the error case, the
-  application may repeatedly call inflateSync, providing more input each time,
-  until success or end of the input data.
-*/
-
-extern int inflateReset OF((z_stream *strm));
-/*
-     This function is equivalent to inflateEnd followed by inflateInit,
-   but does not free and reallocate all the internal decompression state.
-   The stream will keep attributes that may have been set by inflateInit2.
-
-      inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent (such as zalloc or state being NULL).
-*/
-
-extern int inflateIncomp OF((z_stream *strm));
-/*
-     This function adds the data at next_in (avail_in bytes) to the output
-   history without performing any output.  There must be no pending output,
-   and the decompressor must be expecting to see the start of a block.
-   Calling this function is equivalent to decompressing a stored block
-   containing the data at next_in (except that the data is not output).
-*/
-
-                        /* checksum functions */
-
-/*
-     This function is not related to compression but is exported
-   anyway because it might be useful in applications using the
-   compression library.
-*/
-
-extern uLong adler32 OF((uLong adler, Bytef *buf, uInt len));
-
-/*
-     Update a running Adler-32 checksum with the bytes buf[0..len-1] and
-   return the updated checksum. If buf is NULL, this function returns
-   the required initial value for the checksum.
-   An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
-   much faster. Usage example:
-
-     uLong adler = adler32(0L, Z_NULL, 0);
-
-     while (read_buffer(buffer, length) != EOF) {
-       adler = adler32(adler, buffer, length);
-     }
-     if (adler != original_adler) error();
-*/
-
-#ifndef _Z_UTIL_H
-    struct internal_state {int dummy;}; /* hack for buggy compilers */
-#endif
-
-#endif /* _ZLIB_H */
diff --git a/arch/ppc64/kernel/HvLpEvent.c b/arch/ppc64/kernel/HvLpEvent.c
deleted file mode 100644
index 90032b138902..000000000000
--- a/arch/ppc64/kernel/HvLpEvent.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * Copyright 2001 Mike Corrigan IBM Corp
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <asm/system.h>
-#include <asm/iSeries/HvLpEvent.h>
-#include <asm/iSeries/HvCallEvent.h>
-#include <asm/iSeries/ItLpNaca.h>
-
-/* Array of LpEvent handler functions */
-LpEventHandler lpEventHandler[HvLpEvent_Type_NumTypes];
-unsigned lpEventHandlerPaths[HvLpEvent_Type_NumTypes];
-
-/* Register a handler for an LpEvent type */
-
-int HvLpEvent_registerHandler( HvLpEvent_Type eventType, LpEventHandler handler )
-{
-	int rc = 1;
-	if ( eventType < HvLpEvent_Type_NumTypes ) {
-		lpEventHandler[eventType] = handler;
-		rc = 0;
-	}
-	return rc;
-	
-}
-
-int HvLpEvent_unregisterHandler( HvLpEvent_Type eventType )
-{
-	int rc = 1;
-
-	might_sleep();
-
-	if ( eventType < HvLpEvent_Type_NumTypes ) {
-		if ( !lpEventHandlerPaths[eventType] ) {
-			lpEventHandler[eventType] = NULL;
-			rc = 0;
-
-			/* We now sleep until all other CPUs have scheduled. This ensures that
-			 * the deletion is seen by all other CPUs, and that the deleted handler
-			 * isn't still running on another CPU when we return. */
-			synchronize_rcu();
-		}
-	}
-	return rc;
-}
-EXPORT_SYMBOL(HvLpEvent_registerHandler);
-EXPORT_SYMBOL(HvLpEvent_unregisterHandler);
-
-/* (lpIndex is the partition index of the target partition.  
- * needed only for VirtualIo, VirtualLan and SessionMgr.  Zero
- * indicates to use our partition index - for the other types)
- */
-int HvLpEvent_openPath( HvLpEvent_Type eventType, HvLpIndex lpIndex )
-{
-	int rc = 1;
-	if ( eventType < HvLpEvent_Type_NumTypes &&
-	     lpEventHandler[eventType] ) {
-		if ( lpIndex == 0 )
-			lpIndex = itLpNaca.xLpIndex;
-		HvCallEvent_openLpEventPath( lpIndex, eventType );
-		++lpEventHandlerPaths[eventType];
-		rc = 0;
-	}
-	return rc;
-}
-
-int HvLpEvent_closePath( HvLpEvent_Type eventType, HvLpIndex lpIndex )
-{
-	int rc = 1;
-	if ( eventType < HvLpEvent_Type_NumTypes &&
-	     lpEventHandler[eventType] &&
-	     lpEventHandlerPaths[eventType] ) {
-		if ( lpIndex == 0 )
-			lpIndex = itLpNaca.xLpIndex;
-		HvCallEvent_closeLpEventPath( lpIndex, eventType );
-		--lpEventHandlerPaths[eventType];
-		rc = 0;
-	}
-	return rc;
-}
-
diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile
deleted file mode 100644
index ae60eb1193c6..000000000000
--- a/arch/ppc64/kernel/Makefile
+++ /dev/null
@@ -1,85 +0,0 @@
-#
-# Makefile for the linux ppc64 kernel.
-#
-
-EXTRA_CFLAGS	+= -mno-minimal-toc
-extra-y		:= head.o vmlinux.lds
-
-obj-y               :=	setup.o entry.o traps.o irq.o idle.o dma.o \
-			time.o process.o signal.o syscalls.o misc.o ptrace.o \
-			align.o semaphore.o bitops.o pacaData.o \
-			udbg.o binfmt_elf32.o sys_ppc32.o ioctl32.o \
-			ptrace32.o signal32.o rtc.o init_task.o \
-			lmb.o cputable.o cpu_setup_power4.o idle_power4.o \
-			iommu.o sysfs.o vdso.o pmc.o firmware.o
-obj-y += vdso32/ vdso64/
-
-obj-$(CONFIG_PPC_OF) +=	of_device.o
-
-pci-obj-$(CONFIG_PPC_ISERIES)	+= iSeries_pci.o iSeries_irq.o \
-				iSeries_VpdInfo.o
-pci-obj-$(CONFIG_PPC_MULTIPLATFORM)	+= pci_dn.o pci_direct_iommu.o
-
-obj-$(CONFIG_PCI)	+= pci.o pci_iommu.o iomap.o $(pci-obj-y)
-
-obj-$(CONFIG_PPC_ISERIES) += HvCall.o HvLpConfig.o LparData.o \
-			     iSeries_setup.o ItLpQueue.o hvCall.o \
-			     mf.o HvLpEvent.o iSeries_proc.o iSeries_htab.o \
-			     iSeries_iommu.o
-
-obj-$(CONFIG_PPC_MULTIPLATFORM) += nvram.o i8259.o prom_init.o prom.o
-
-obj-$(CONFIG_PPC_PSERIES) += pSeries_pci.o pSeries_lpar.o pSeries_hvCall.o \
-			     pSeries_nvram.o rtasd.o ras.o pSeries_reconfig.o \
-			     pSeries_setup.o pSeries_iommu.o udbg_16550.o
-
-obj-$(CONFIG_PPC_BPA) += bpa_setup.o bpa_iommu.o bpa_nvram.o \
-			 bpa_iic.o spider-pic.o
-
-obj-$(CONFIG_KEXEC)		+= machine_kexec.o
-obj-$(CONFIG_EEH)		+= eeh.o
-obj-$(CONFIG_PROC_FS)		+= proc_ppc64.o
-obj-$(CONFIG_RTAS_FLASH)	+= rtas_flash.o
-obj-$(CONFIG_SMP)		+= smp.o
-obj-$(CONFIG_MODULES)		+= module.o ppc_ksyms.o
-obj-$(CONFIG_PPC_RTAS)		+= rtas.o rtas_pci.o
-obj-$(CONFIG_RTAS_PROC)		+= rtas-proc.o
-obj-$(CONFIG_SCANLOG)		+= scanlog.o
-obj-$(CONFIG_VIOPATH)		+= viopath.o
-obj-$(CONFIG_LPARCFG)		+= lparcfg.o
-obj-$(CONFIG_HVC_CONSOLE)	+= hvconsole.o
-obj-$(CONFIG_BOOTX_TEXT)	+= btext.o
-obj-$(CONFIG_HVCS)		+= hvcserver.o
-
-vio-obj-$(CONFIG_PPC_PSERIES)	+= pSeries_vio.o
-vio-obj-$(CONFIG_PPC_ISERIES)	+= iSeries_vio.o
-obj-$(CONFIG_IBMVIO)		+= vio.o $(vio-obj-y)
-obj-$(CONFIG_XICS)		+= xics.o
-obj-$(CONFIG_MPIC)		+= mpic.o
-
-obj-$(CONFIG_PPC_PMAC)		+= pmac_setup.o pmac_feature.o pmac_pci.o \
-				   pmac_time.o pmac_nvram.o pmac_low_i2c.o \
-				   udbg_scc.o
-
-obj-$(CONFIG_PPC_MAPLE)		+= maple_setup.o maple_pci.o maple_time.o \
-				   udbg_16550.o
-
-obj-$(CONFIG_U3_DART)		+= u3_iommu.o
-
-ifdef CONFIG_SMP
-obj-$(CONFIG_PPC_PMAC)		+= pmac_smp.o smp-tbsync.o
-obj-$(CONFIG_PPC_ISERIES)	+= iSeries_smp.o
-obj-$(CONFIG_PPC_PSERIES)	+= pSeries_smp.o
-obj-$(CONFIG_PPC_BPA)		+= pSeries_smp.o
-obj-$(CONFIG_PPC_MAPLE)		+= smp-tbsync.o
-endif
-
-obj-$(CONFIG_ALTIVEC)		+= vecemu.o vector.o
-obj-$(CONFIG_KPROBES)		+= kprobes.o
-
-CFLAGS_ioctl32.o += -Ifs/
-
-ifeq ($(CONFIG_PPC_ISERIES),y)
-arch/ppc64/kernel/head.o: arch/ppc64/kernel/lparmap.s
-AFLAGS_head.o += -Iarch/ppc64/kernel
-endif
diff --git a/arch/ppc64/kernel/cputable.c b/arch/ppc64/kernel/cputable.c
deleted file mode 100644
index 8831a28c3c4e..000000000000
--- a/arch/ppc64/kernel/cputable.c
+++ /dev/null
@@ -1,308 +0,0 @@
-/*
- *  arch/ppc64/kernel/cputable.c
- *
- *  Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org)
- *
- *  Modifications for ppc64:
- *      Copyright (C) 2003 Dave Engebretsen <engebret@us.ibm.com>
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-
-#include <linux/config.h>
-#include <linux/string.h>
-#include <linux/sched.h>
-#include <linux/threads.h>
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <asm/oprofile_impl.h>
-#include <asm/cputable.h>
-
-struct cpu_spec* cur_cpu_spec = NULL;
-EXPORT_SYMBOL(cur_cpu_spec);
-
-/* NOTE:
- * Unlike ppc32, ppc64 will only call this once for the boot CPU, it's
- * the responsibility of the appropriate CPU save/restore functions to
- * eventually copy these settings over. Those save/restore aren't yet
- * part of the cputable though. That has to be fixed for both ppc32
- * and ppc64
- */
-extern void __setup_cpu_power3(unsigned long offset, struct cpu_spec* spec);
-extern void __setup_cpu_power4(unsigned long offset, struct cpu_spec* spec);
-extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec);
-extern void __setup_cpu_be(unsigned long offset, struct cpu_spec* spec);
-
-
-/* We only set the altivec features if the kernel was compiled with altivec
- * support
- */
-#ifdef CONFIG_ALTIVEC
-#define CPU_FTR_ALTIVEC_COMP	CPU_FTR_ALTIVEC
-#define PPC_FEATURE_HAS_ALTIVEC_COMP PPC_FEATURE_HAS_ALTIVEC
-#else
-#define CPU_FTR_ALTIVEC_COMP	0
-#define PPC_FEATURE_HAS_ALTIVEC_COMP    0
-#endif
-
-struct cpu_spec	cpu_specs[] = {
-	{	/* Power3 */
-		.pvr_mask		= 0xffff0000,
-		.pvr_value		= 0x00400000,
-		.cpu_name		= "POWER3 (630)",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_IABR,
-		.cpu_user_features = COMMON_USER_PPC64,
-		.icache_bsize		= 128,
-		.dcache_bsize		= 128,
-		.num_pmcs		= 8,
-		.cpu_setup		= __setup_cpu_power3,
-#ifdef CONFIG_OPROFILE
-		.oprofile_cpu_type	= "ppc64/power3",
-		.oprofile_model		= &op_model_rs64,
-#endif
-	},
-	{	/* Power3+ */
-		.pvr_mask		= 0xffff0000,
-		.pvr_value		= 0x00410000,
-		.cpu_name		= "POWER3 (630+)",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_IABR,
-		.cpu_user_features	= COMMON_USER_PPC64,
-		.icache_bsize		= 128,
-		.dcache_bsize		= 128,
-		.num_pmcs		= 8,
-		.cpu_setup		= __setup_cpu_power3,
-#ifdef CONFIG_OPROFILE
-		.oprofile_cpu_type	= "ppc64/power3",
-		.oprofile_model		= &op_model_rs64,
-#endif
-	},
-	{	/* Northstar */
-		.pvr_mask		= 0xffff0000,
-		.pvr_value		= 0x00330000,
-		.cpu_name		= "RS64-II (northstar)",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_IABR |
-			CPU_FTR_MMCRA | CPU_FTR_CTRL,
-		.cpu_user_features	= COMMON_USER_PPC64,
-		.icache_bsize		= 128,
-		.dcache_bsize		= 128,
-		.num_pmcs		= 8,
-		.cpu_setup		= __setup_cpu_power3,
-#ifdef CONFIG_OPROFILE
-		.oprofile_cpu_type	= "ppc64/rs64",
-		.oprofile_model		= &op_model_rs64,
-#endif
-	},
-	{	/* Pulsar */
-		.pvr_mask		= 0xffff0000,
-		.pvr_value		= 0x00340000,
-		.cpu_name		= "RS64-III (pulsar)",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_IABR |
-			CPU_FTR_MMCRA | CPU_FTR_CTRL,
-		.cpu_user_features	= COMMON_USER_PPC64,
-		.icache_bsize		= 128,
-		.dcache_bsize		= 128,
-		.num_pmcs		= 8,
-		.cpu_setup		= __setup_cpu_power3,
-#ifdef CONFIG_OPROFILE
-		.oprofile_cpu_type	= "ppc64/rs64",
-		.oprofile_model		= &op_model_rs64,
-#endif
-	},
-	{	/* I-star */
-		.pvr_mask		= 0xffff0000,
-		.pvr_value		= 0x00360000,
-		.cpu_name		= "RS64-III (icestar)",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_IABR |
-			CPU_FTR_MMCRA | CPU_FTR_CTRL,
-		.cpu_user_features	= COMMON_USER_PPC64,
-		.icache_bsize		= 128,
-		.dcache_bsize		= 128,
-		.num_pmcs		= 8,
-		.cpu_setup		= __setup_cpu_power3,
-#ifdef CONFIG_OPROFILE
-		.oprofile_cpu_type	= "ppc64/rs64",
-		.oprofile_model		= &op_model_rs64,
-#endif
-	},
-	{	/* S-star */
-		.pvr_mask		= 0xffff0000,
-		.pvr_value		= 0x00370000,
-		.cpu_name		= "RS64-IV (sstar)",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_IABR |
-			CPU_FTR_MMCRA | CPU_FTR_CTRL,
-		.cpu_user_features	= COMMON_USER_PPC64,
-		.icache_bsize		= 128,
-		.dcache_bsize		= 128,
-		.num_pmcs		= 8,
-		.cpu_setup		= __setup_cpu_power3,
-#ifdef CONFIG_OPROFILE
-		.oprofile_cpu_type	= "ppc64/rs64",
-		.oprofile_model		= &op_model_rs64,
-#endif
-	},
-	{	/* Power4 */
-		.pvr_mask		= 0xffff0000,
-		.pvr_value		= 0x00350000,
-		.cpu_name		= "POWER4 (gp)",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
-			CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_MMCRA,
-		.cpu_user_features	= COMMON_USER_PPC64,
-		.icache_bsize		= 128,
-		.dcache_bsize		= 128,
-		.num_pmcs		= 8,
-		.cpu_setup		= __setup_cpu_power4,
-#ifdef CONFIG_OPROFILE
-		.oprofile_cpu_type	= "ppc64/power4",
-		.oprofile_model		= &op_model_rs64,
-#endif
-	},
-	{	/* Power4+ */
-		.pvr_mask		= 0xffff0000,
-		.pvr_value		= 0x00380000,
-		.cpu_name		= "POWER4+ (gq)",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
-			CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_MMCRA,
-		.cpu_user_features	= COMMON_USER_PPC64,
-		.icache_bsize		= 128,
-		.dcache_bsize		= 128,
-		.num_pmcs		= 8,
-		.cpu_setup		= __setup_cpu_power4,
-#ifdef CONFIG_OPROFILE
-		.oprofile_cpu_type	= "ppc64/power4",
-		.oprofile_model		= &op_model_power4,
-#endif
-	},
-	{	/* PPC970 */
-		.pvr_mask		= 0xffff0000,
-		.pvr_value		= 0x00390000,
-		.cpu_name		= "PPC970",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
-			CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_ALTIVEC_COMP |
-			CPU_FTR_CAN_NAP | CPU_FTR_MMCRA,
-		.cpu_user_features	= COMMON_USER_PPC64 |
-			PPC_FEATURE_HAS_ALTIVEC_COMP,
-		.icache_bsize		= 128,
-		.dcache_bsize		= 128,
-		.num_pmcs		= 8,
-		.cpu_setup		= __setup_cpu_ppc970,
-#ifdef CONFIG_OPROFILE
-		.oprofile_cpu_type	= "ppc64/970",
-		.oprofile_model		= &op_model_power4,
-#endif
-	},
-	{	/* PPC970FX */
-		.pvr_mask		= 0xffff0000,
-		.pvr_value		= 0x003c0000,
-		.cpu_name		= "PPC970FX",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
-			CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_ALTIVEC_COMP |
-			CPU_FTR_CAN_NAP | CPU_FTR_MMCRA,
-		.cpu_user_features	= COMMON_USER_PPC64 |
-			PPC_FEATURE_HAS_ALTIVEC_COMP,
-		.icache_bsize		= 128,
-		.dcache_bsize		= 128,
-		.num_pmcs		= 8,
-		.cpu_setup		= __setup_cpu_ppc970,
-#ifdef CONFIG_OPROFILE
-		.oprofile_cpu_type	= "ppc64/970",
-		.oprofile_model		= &op_model_power4,
-#endif
-	},
-	{	/* PPC970MP */
-		.pvr_mask		= 0xffff0000,
-		.pvr_value		= 0x00440000,
-		.cpu_name		= "PPC970MP",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
-			CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_ALTIVEC_COMP |
-			CPU_FTR_CAN_NAP | CPU_FTR_MMCRA,
-		.cpu_user_features	= COMMON_USER_PPC64 |
-			PPC_FEATURE_HAS_ALTIVEC_COMP,
-		.icache_bsize		= 128,
-		.dcache_bsize		= 128,
-		.cpu_setup		= __setup_cpu_ppc970,
-#ifdef CONFIG_OPROFILE
-		.oprofile_cpu_type	= "ppc64/970",
-		.oprofile_model		= &op_model_power4,
-#endif
-	},
-	{	/* Power5 */
-		.pvr_mask		= 0xffff0000,
-		.pvr_value		= 0x003a0000,
-		.cpu_name		= "POWER5 (gr)",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
-			CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_MMCRA | CPU_FTR_SMT |
-			CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE |
-			CPU_FTR_MMCRA_SIHV,
-		.cpu_user_features	= COMMON_USER_PPC64,
-		.icache_bsize		= 128,
-		.dcache_bsize		= 128,
-		.num_pmcs		= 6,
-		.cpu_setup		= __setup_cpu_power4,
-#ifdef CONFIG_OPROFILE
-		.oprofile_cpu_type	= "ppc64/power5",
-		.oprofile_model		= &op_model_power4,
-#endif
-	},
-	{	/* Power5 */
-		.pvr_mask		= 0xffff0000,
-		.pvr_value		= 0x003b0000,
-		.cpu_name		= "POWER5 (gs)",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
-			CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_MMCRA | CPU_FTR_SMT |
-			CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE |
-			CPU_FTR_MMCRA_SIHV,
-		.cpu_user_features	= COMMON_USER_PPC64,
-		.icache_bsize		= 128,
-		.dcache_bsize		= 128,
-		.num_pmcs		= 6,
-		.cpu_setup		= __setup_cpu_power4,
-#ifdef CONFIG_OPROFILE
-		.oprofile_cpu_type	= "ppc64/power5",
-		.oprofile_model		= &op_model_power4,
-#endif
-	},
-	{	/* BE DD1.x */
-		.pvr_mask		= 0xffff0000,
-		.pvr_value		= 0x00700000,
-		.cpu_name		= "Broadband Engine",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
-			CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_ALTIVEC_COMP |
-			CPU_FTR_SMT,
-		.cpu_user_features	= COMMON_USER_PPC64 |
-			PPC_FEATURE_HAS_ALTIVEC_COMP,
-		.icache_bsize		= 128,
-		.dcache_bsize		= 128,
-		.cpu_setup		= __setup_cpu_be,
-	},
-	{	/* default match */
-		.pvr_mask		= 0x00000000,
-		.pvr_value		= 0x00000000,
-		.cpu_name		= "POWER4 (compatible)",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
-			CPU_FTR_PPCAS_ARCH_V2,
-		.cpu_user_features	= COMMON_USER_PPC64,
-		.icache_bsize		= 128,
-		.dcache_bsize		= 128,
-		.num_pmcs		= 6,
-		.cpu_setup		= __setup_cpu_power4,
-	}
-};
diff --git a/arch/ppc64/kernel/i8259.c b/arch/ppc64/kernel/i8259.c
deleted file mode 100644
index 74dcfd68fc75..000000000000
--- a/arch/ppc64/kernel/i8259.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * c 2001 PPC64 Team, IBM Corp
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/cache.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <asm/io.h>
-#include <asm/ppcdebug.h>
-#include "i8259.h"
-
-unsigned char cached_8259[2] = { 0xff, 0xff };
-#define cached_A1 (cached_8259[0])
-#define cached_21 (cached_8259[1])
-
-static  __cacheline_aligned_in_smp DEFINE_SPINLOCK(i8259_lock);
-
-static int i8259_pic_irq_offset;
-static int i8259_present;
-
-int i8259_irq(int cpu)
-{
-	int irq;
-	
-	spin_lock/*_irqsave*/(&i8259_lock/*, flags*/);
-        /*
-         * Perform an interrupt acknowledge cycle on controller 1
-         */                                                             
-        outb(0x0C, 0x20);
-        irq = inb(0x20) & 7;                                   
-        if (irq == 2)                                                     
-        {                                                                   
-                /*                                     
-                 * Interrupt is cascaded so perform interrupt
-                 * acknowledge on controller 2
-                 */
-                outb(0x0C, 0xA0);                      
-                irq = (inb(0xA0) & 7) + 8;
-        }
-        else if (irq==7)                                
-        {
-                /*                               
-                 * This may be a spurious interrupt
-                 *                         
-                 * Read the interrupt status register. If the most
-                 * significant bit is not set then there is no valid
-		 * interrupt
-		 */
-		outb(0x0b, 0x20);
-		if(~inb(0x20)&0x80) {
-			spin_unlock/*_irqrestore*/(&i8259_lock/*, flags*/);
-			return -1;
-		}
-	}
-	spin_unlock/*_irqrestore*/(&i8259_lock/*, flags*/);
-	return irq;
-}
-
-static void i8259_mask_and_ack_irq(unsigned int irq_nr)
-{
-	unsigned long flags;
-	
-	spin_lock_irqsave(&i8259_lock, flags);
-        if ( irq_nr >= i8259_pic_irq_offset )
-                irq_nr -= i8259_pic_irq_offset;
-
-        if (irq_nr > 7) {                                                   
-                cached_A1 |= 1 << (irq_nr-8);                                   
-                inb(0xA1);      /* DUMMY */                                     
-                outb(cached_A1,0xA1);                                           
-                outb(0x20,0xA0);        /* Non-specific EOI */             
-                outb(0x20,0x20);        /* Non-specific EOI to cascade */
-        } else {                                                            
-                cached_21 |= 1 << irq_nr;                                   
-                inb(0x21);      /* DUMMY */                                 
-                outb(cached_21,0x21);
-                outb(0x20,0x20);        /* Non-specific EOI */                 
-        }                                                                
-	spin_unlock_irqrestore(&i8259_lock, flags);
-}
-
-static void i8259_set_irq_mask(int irq_nr)
-{
-        outb(cached_A1,0xA1);
-        outb(cached_21,0x21);
-}
-
-static void i8259_mask_irq(unsigned int irq_nr)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&i8259_lock, flags);
-        if ( irq_nr >= i8259_pic_irq_offset )
-                irq_nr -= i8259_pic_irq_offset;
-        if ( irq_nr < 8 )
-                cached_21 |= 1 << irq_nr;
-        else
-                cached_A1 |= 1 << (irq_nr-8);
-        i8259_set_irq_mask(irq_nr);
-	spin_unlock_irqrestore(&i8259_lock, flags);
-}
-
-static void i8259_unmask_irq(unsigned int irq_nr)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&i8259_lock, flags);
-        if ( irq_nr >= i8259_pic_irq_offset )
-                irq_nr -= i8259_pic_irq_offset;
-        if ( irq_nr < 8 )
-                cached_21 &= ~(1 << irq_nr);
-        else
-                cached_A1 &= ~(1 << (irq_nr-8));
-        i8259_set_irq_mask(irq_nr);
-	spin_unlock_irqrestore(&i8259_lock, flags);
-}
-
-static void i8259_end_irq(unsigned int irq)
-{
-	if (!(get_irq_desc(irq)->status & (IRQ_DISABLED|IRQ_INPROGRESS)) &&
-	    get_irq_desc(irq)->action)
-		i8259_unmask_irq(irq);
-}
-
-struct hw_interrupt_type i8259_pic = {
-	.typename = " i8259    ",
-	.enable = i8259_unmask_irq,
-	.disable = i8259_mask_irq,
-	.ack = i8259_mask_and_ack_irq,
-	.end = i8259_end_irq,
-};
-
-void __init i8259_init(int offset)
-{
-	unsigned long flags;
-	
-	spin_lock_irqsave(&i8259_lock, flags);
-	i8259_pic_irq_offset = offset;
-	i8259_present = 1;
-        /* init master interrupt controller */
-        outb(0x11, 0x20); /* Start init sequence */
-        outb(0x00, 0x21); /* Vector base */
-        outb(0x04, 0x21); /* edge tiggered, Cascade (slave) on IRQ2 */
-        outb(0x01, 0x21); /* Select 8086 mode */
-        outb(0xFF, 0x21); /* Mask all */
-        /* init slave interrupt controller */
-        outb(0x11, 0xA0); /* Start init sequence */
-        outb(0x08, 0xA1); /* Vector base */
-        outb(0x02, 0xA1); /* edge triggered, Cascade (slave) on IRQ2 */
-        outb(0x01, 0xA1); /* Select 8086 mode */
-        outb(0xFF, 0xA1); /* Mask all */
-        outb(cached_A1, 0xA1);
-        outb(cached_21, 0x21);
-	spin_unlock_irqrestore(&i8259_lock, flags);
-        
-}
-
-static int i8259_request_cascade(void)
-{
-	if (!i8259_present)
-		return -ENODEV;
-
-        request_irq( i8259_pic_irq_offset + 2, no_action, SA_INTERRUPT,
-                     "82c59 secondary cascade", NULL );
-
-	return 0;
-}
-
-arch_initcall(i8259_request_cascade);
diff --git a/arch/ppc64/kernel/i8259.h b/arch/ppc64/kernel/i8259.h
deleted file mode 100644
index f74764ba0bfa..000000000000
--- a/arch/ppc64/kernel/i8259.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * c 2001 PPC 64 Team, IBM Corp
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#ifndef _PPC_KERNEL_i8259_H
-#define _PPC_KERNEL_i8259_H
-
-extern struct hw_interrupt_type i8259_pic;
-
-extern void i8259_init(int offset);
-extern int i8259_irq(int);
-
-#endif /* _PPC_KERNEL_i8259_H */
diff --git a/arch/ppc64/kernel/misc.S b/arch/ppc64/kernel/misc.S
deleted file mode 100644
index e7241ad80a08..000000000000
--- a/arch/ppc64/kernel/misc.S
+++ /dev/null
@@ -1,1513 +0,0 @@
-/*
- *  arch/ppc/kernel/misc.S
- *
- *  
- *
- * This file contains miscellaneous low-level functions.
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Largely rewritten by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras.
- * Adapted for iSeries by Mike Corrigan (mikejc@us.ibm.com)
- * PPC64 updates by Dave Engebretsen (engebret@us.ibm.com) 
- * 
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/config.h>
-#include <linux/sys.h>
-#include <asm/unistd.h>
-#include <asm/errno.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/cache.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-#include <asm/cputable.h>
-
-	.text
-
-/*
- * Returns (address we were linked at) - (address we are running at)
- * for use before the text and data are mapped to KERNELBASE.
- */
-
-_GLOBAL(reloc_offset)
-	mflr	r0
-	bl	1f
-1:	mflr	r3
-	LOADADDR(r4,1b)
-	sub	r3,r4,r3
-	mtlr	r0
-	blr
-
-_GLOBAL(get_msr)
-	mfmsr	r3
-	blr
-
-_GLOBAL(get_dar)
-	mfdar	r3
-	blr
-
-_GLOBAL(get_srr0)
-	mfsrr0  r3
-	blr
-
-_GLOBAL(get_srr1)
-	mfsrr1  r3
-	blr
-	
-_GLOBAL(get_sp)
-	mr	r3,r1
-	blr
-		
-#ifdef CONFIG_PPC_ISERIES
-/* unsigned long local_save_flags(void) */
-_GLOBAL(local_get_flags)
-	lbz	r3,PACAPROCENABLED(r13)
-	blr
-
-/* unsigned long local_irq_disable(void) */
-_GLOBAL(local_irq_disable)
-	lbz	r3,PACAPROCENABLED(r13)
-	li	r4,0
-	stb	r4,PACAPROCENABLED(r13)
-	blr			/* Done */
-
-/* void local_irq_restore(unsigned long flags) */	
-_GLOBAL(local_irq_restore)
-	lbz	r5,PACAPROCENABLED(r13)
-	 /* Check if things are setup the way we want _already_. */
-	cmpw	0,r3,r5
-	beqlr
-	/* are we enabling interrupts? */
-	cmpdi	0,r3,0
-	stb	r3,PACAPROCENABLED(r13)
-	beqlr
-	/* Check pending interrupts */
-	/*   A decrementer, IPI or PMC interrupt may have occurred
-	 *   while we were in the hypervisor (which enables) */
-	ld	r4,PACALPPACA+LPPACAANYINT(r13)
-	cmpdi	r4,0
-	beqlr
-
-	/*
-	 * Handle pending interrupts in interrupt context
-	 */
-	li	r0,0x5555
-	sc
-	blr
-#endif /* CONFIG_PPC_ISERIES */
-
-#ifdef CONFIG_IRQSTACKS
-_GLOBAL(call_do_softirq)
-	mflr	r0
-	std	r0,16(r1)
-	stdu	r1,THREAD_SIZE-112(r3)
-	mr	r1,r3
-	bl	.__do_softirq
-	ld	r1,0(r1)
-	ld	r0,16(r1)
-	mtlr	r0
-	blr
-
-_GLOBAL(call_handle_IRQ_event)
-	mflr	r0
-	std	r0,16(r1)
-	stdu	r1,THREAD_SIZE-112(r6)
-	mr	r1,r6
-	bl	.handle_IRQ_event
-	ld	r1,0(r1)
-	ld	r0,16(r1)
-	mtlr	r0
-	blr
-#endif /* CONFIG_IRQSTACKS */
-
-	/*
- * To be called by C code which needs to do some operations with MMU
- * disabled. Note that interrupts have to be disabled by the caller
- * prior to calling us. The code called _MUST_ be in the RMO of course
- * and part of the linear mapping as we don't attempt to translate the
- * stack pointer at all. The function is called with the stack switched
- * to this CPU emergency stack
- *
- * prototype is void *call_with_mmu_off(void *func, void *data);
- *
- * the called function is expected to be of the form
- *
- * void *called(void *data); 
- */
-_GLOBAL(call_with_mmu_off)
-	mflr	r0			/* get link, save it on stackframe */
-	std	r0,16(r1)
-	mr	r1,r5			/* save old stack ptr */
-	ld	r1,PACAEMERGSP(r13)	/* get emerg. stack */
-	subi	r1,r1,STACK_FRAME_OVERHEAD
-	std	r0,16(r1)		/* save link on emerg. stack */
-	std	r5,0(r1)		/* save old stack ptr in backchain */
-	ld	r3,0(r3)		/* get to real function ptr (assume same TOC) */
-	bl	2f			/* we need LR to return, continue at label 2 */
-
-	ld	r0,16(r1)		/* we return here from the call, get LR and */
-	ld	r1,0(r1)		/* .. old stack ptr */
-	mtspr	SPRN_SRR0,r0		/* and get back to virtual mode with these */
-	mfmsr	r4
-	ori	r4,r4,MSR_IR|MSR_DR
-	mtspr	SPRN_SRR1,r4
-	rfid
-
-2:	mtspr	SPRN_SRR0,r3		/* coming from above, enter real mode */
-	mr	r3,r4			/* get parameter */
-	mfmsr	r0
-	ori	r0,r0,MSR_IR|MSR_DR
-	xori	r0,r0,MSR_IR|MSR_DR
-	mtspr	SPRN_SRR1,r0
-	rfid
-
-
-	.section	".toc","aw"
-PPC64_CACHES:
-	.tc		ppc64_caches[TC],ppc64_caches
-	.section	".text"
-
-/*
- * Write any modified data cache blocks out to memory
- * and invalidate the corresponding instruction cache blocks.
- *
- * flush_icache_range(unsigned long start, unsigned long stop)
- *
- *   flush all bytes from start through stop-1 inclusive
- */
-
-_KPROBE(__flush_icache_range)
-
-/*
- * Flush the data cache to memory 
- * 
- * Different systems have different cache line sizes
- * and in some cases i-cache and d-cache line sizes differ from
- * each other.
- */
- 	ld	r10,PPC64_CACHES@toc(r2)
-	lwz	r7,DCACHEL1LINESIZE(r10)/* Get cache line size */
-	addi	r5,r7,-1
-	andc	r6,r3,r5		/* round low to line bdy */
-	subf	r8,r6,r4		/* compute length */
-	add	r8,r8,r5		/* ensure we get enough */
-	lwz	r9,DCACHEL1LOGLINESIZE(r10)	/* Get log-2 of cache line size */
-	srw.	r8,r8,r9		/* compute line count */
-	beqlr				/* nothing to do? */
-	mtctr	r8
-1:	dcbst	0,r6
-	add	r6,r6,r7
-	bdnz	1b
-	sync
-
-/* Now invalidate the instruction cache */
-	
-	lwz	r7,ICACHEL1LINESIZE(r10)	/* Get Icache line size */
-	addi	r5,r7,-1
-	andc	r6,r3,r5		/* round low to line bdy */
-	subf	r8,r6,r4		/* compute length */
-	add	r8,r8,r5
-	lwz	r9,ICACHEL1LOGLINESIZE(r10)	/* Get log-2 of Icache line size */
-	srw.	r8,r8,r9		/* compute line count */
-	beqlr				/* nothing to do? */
-	mtctr	r8
-2:	icbi	0,r6
-	add	r6,r6,r7
-	bdnz	2b
-	isync
-	blr
-	.previous .text
-/*
- * Like above, but only do the D-cache.
- *
- * flush_dcache_range(unsigned long start, unsigned long stop)
- *
- *    flush all bytes from start to stop-1 inclusive
- */
-_GLOBAL(flush_dcache_range)
-
-/*
- * Flush the data cache to memory 
- * 
- * Different systems have different cache line sizes
- */
- 	ld	r10,PPC64_CACHES@toc(r2)
-	lwz	r7,DCACHEL1LINESIZE(r10)	/* Get dcache line size */
-	addi	r5,r7,-1
-	andc	r6,r3,r5		/* round low to line bdy */
-	subf	r8,r6,r4		/* compute length */
-	add	r8,r8,r5		/* ensure we get enough */
-	lwz	r9,DCACHEL1LOGLINESIZE(r10)	/* Get log-2 of dcache line size */
-	srw.	r8,r8,r9		/* compute line count */
-	beqlr				/* nothing to do? */
-	mtctr	r8
-0:	dcbst	0,r6
-	add	r6,r6,r7
-	bdnz	0b
-	sync
-	blr
-
-/*
- * Like above, but works on non-mapped physical addresses.
- * Use only for non-LPAR setups ! It also assumes real mode
- * is cacheable. Used for flushing out the DART before using
- * it as uncacheable memory 
- *
- * flush_dcache_phys_range(unsigned long start, unsigned long stop)
- *
- *    flush all bytes from start to stop-1 inclusive
- */
-_GLOBAL(flush_dcache_phys_range)
- 	ld	r10,PPC64_CACHES@toc(r2)
-	lwz	r7,DCACHEL1LINESIZE(r10)	/* Get dcache line size */
-	addi	r5,r7,-1
-	andc	r6,r3,r5		/* round low to line bdy */
-	subf	r8,r6,r4		/* compute length */
-	add	r8,r8,r5		/* ensure we get enough */
-	lwz	r9,DCACHEL1LOGLINESIZE(r10)	/* Get log-2 of dcache line size */
-	srw.	r8,r8,r9		/* compute line count */
-	beqlr				/* nothing to do? */
-	mfmsr	r5			/* Disable MMU Data Relocation */
-	ori	r0,r5,MSR_DR
-	xori	r0,r0,MSR_DR
-	sync
-	mtmsr	r0
-	sync
-	isync
-	mtctr	r8
-0:	dcbst	0,r6
-	add	r6,r6,r7
-	bdnz	0b
-	sync
-	isync
-	mtmsr	r5			/* Re-enable MMU Data Relocation */
-	sync
-	isync
-	blr
-
-_GLOBAL(flush_inval_dcache_range)
- 	ld	r10,PPC64_CACHES@toc(r2)
-	lwz	r7,DCACHEL1LINESIZE(r10)	/* Get dcache line size */
-	addi	r5,r7,-1
-	andc	r6,r3,r5		/* round low to line bdy */
-	subf	r8,r6,r4		/* compute length */
-	add	r8,r8,r5		/* ensure we get enough */
-	lwz	r9,DCACHEL1LOGLINESIZE(r10)/* Get log-2 of dcache line size */
-	srw.	r8,r8,r9		/* compute line count */
-	beqlr				/* nothing to do? */
-	sync
-	isync
-	mtctr	r8
-0:	dcbf	0,r6
-	add	r6,r6,r7
-	bdnz	0b
-	sync
-	isync
-	blr
-
-
-/*
- * Flush a particular page from the data cache to RAM.
- * Note: this is necessary because the instruction cache does *not*
- * snoop from the data cache.
- *
- *	void __flush_dcache_icache(void *page)
- */
-_GLOBAL(__flush_dcache_icache)
-/*
- * Flush the data cache to memory 
- * 
- * Different systems have different cache line sizes
- */
-
-/* Flush the dcache */
- 	ld	r7,PPC64_CACHES@toc(r2)
-	clrrdi	r3,r3,12           	    /* Page align */
-	lwz	r4,DCACHEL1LINESPERPAGE(r7)	/* Get # dcache lines per page */
-	lwz	r5,DCACHEL1LINESIZE(r7)		/* Get dcache line size */
-	mr	r6,r3
-	mtctr	r4
-0:	dcbst	0,r6
-	add	r6,r6,r5
-	bdnz	0b
-	sync
-
-/* Now invalidate the icache */	
-
-	lwz	r4,ICACHEL1LINESPERPAGE(r7)	/* Get # icache lines per page */
-	lwz	r5,ICACHEL1LINESIZE(r7)		/* Get icache line size */
-	mtctr	r4
-1:	icbi	0,r3
-	add	r3,r3,r5
-	bdnz	1b
-	isync
-	blr
-	
-/*
- * I/O string operations
- *
- * insb(port, buf, len)
- * outsb(port, buf, len)
- * insw(port, buf, len)
- * outsw(port, buf, len)
- * insl(port, buf, len)
- * outsl(port, buf, len)
- * insw_ns(port, buf, len)
- * outsw_ns(port, buf, len)
- * insl_ns(port, buf, len)
- * outsl_ns(port, buf, len)
- *
- * The *_ns versions don't do byte-swapping.
- */
-_GLOBAL(_insb)
-	cmpwi	0,r5,0
-	mtctr	r5
-	subi	r4,r4,1
-	blelr-
-00:	lbz	r5,0(r3)
-	eieio
-	stbu	r5,1(r4)
-	bdnz	00b
-	twi	0,r5,0
-	isync
-	blr
-
-_GLOBAL(_outsb)
-	cmpwi	0,r5,0
-	mtctr	r5
-	subi	r4,r4,1
-	blelr-
-00:	lbzu	r5,1(r4)
-	stb	r5,0(r3)
-	bdnz	00b
-	sync
-	blr	
-
-_GLOBAL(_insw)
-	cmpwi	0,r5,0
-	mtctr	r5
-	subi	r4,r4,2
-	blelr-
-00:	lhbrx	r5,0,r3
-	eieio
-	sthu	r5,2(r4)
-	bdnz	00b
-	twi	0,r5,0
-	isync
-	blr
-
-_GLOBAL(_outsw)
-	cmpwi	0,r5,0
-	mtctr	r5
-	subi	r4,r4,2
-	blelr-
-00:	lhzu	r5,2(r4)
-	sthbrx	r5,0,r3	
-	bdnz	00b
-	sync
-	blr	
-
-_GLOBAL(_insl)
-	cmpwi	0,r5,0
-	mtctr	r5
-	subi	r4,r4,4
-	blelr-
-00:	lwbrx	r5,0,r3
-	eieio
-	stwu	r5,4(r4)
-	bdnz	00b
-	twi	0,r5,0
-	isync
-	blr
-
-_GLOBAL(_outsl)
-	cmpwi	0,r5,0
-	mtctr	r5
-	subi	r4,r4,4
-	blelr-
-00:	lwzu	r5,4(r4)
-	stwbrx	r5,0,r3
-	bdnz	00b
-	sync
-	blr	
-
-/* _GLOBAL(ide_insw) now in drivers/ide/ide-iops.c */
-_GLOBAL(_insw_ns)
-	cmpwi	0,r5,0
-	mtctr	r5
-	subi	r4,r4,2
-	blelr-
-00:	lhz	r5,0(r3)
-	eieio
-	sthu	r5,2(r4)
-	bdnz	00b
-	twi	0,r5,0
-	isync
-	blr
-
-/* _GLOBAL(ide_outsw) now in drivers/ide/ide-iops.c */
-_GLOBAL(_outsw_ns)
-	cmpwi	0,r5,0
-	mtctr	r5
-	subi	r4,r4,2
-	blelr-
-00:	lhzu	r5,2(r4)
-	sth	r5,0(r3)
-	bdnz	00b
-	sync
-	blr	
-
-_GLOBAL(_insl_ns)
-	cmpwi	0,r5,0
-	mtctr	r5
-	subi	r4,r4,4
-	blelr-
-00:	lwz	r5,0(r3)
-	eieio
-	stwu	r5,4(r4)
-	bdnz	00b
-	twi	0,r5,0
-	isync
-	blr
-
-_GLOBAL(_outsl_ns)
-	cmpwi	0,r5,0
-	mtctr	r5
-	subi	r4,r4,4
-	blelr-
-00:	lwzu	r5,4(r4)
-	stw	r5,0(r3)
-	bdnz	00b
-	sync
-	blr	
-
-
-_GLOBAL(cvt_fd)
-	lfd	0,0(r5)		/* load up fpscr value */
-	mtfsf	0xff,0
-	lfs	0,0(r3)
-	stfd	0,0(r4)
-	mffs	0		/* save new fpscr value */
-	stfd	0,0(r5)
-	blr
-
-_GLOBAL(cvt_df)
-	lfd	0,0(r5)		/* load up fpscr value */
-	mtfsf	0xff,0
-	lfd	0,0(r3)
-	stfs	0,0(r4)
-	mffs	0		/* save new fpscr value */
-	stfd	0,0(r5)
-	blr
-
-/*
- * identify_cpu and calls setup_cpu
- * In:	r3 = base of the cpu_specs array
- *	r4 = address of cur_cpu_spec
- *	r5 = relocation offset
- */
-_GLOBAL(identify_cpu)
-	mfpvr	r7
-1:
-	lwz	r8,CPU_SPEC_PVR_MASK(r3)
-	and	r8,r8,r7
-	lwz	r9,CPU_SPEC_PVR_VALUE(r3)
-	cmplw	0,r9,r8
-	beq	1f
-	addi	r3,r3,CPU_SPEC_ENTRY_SIZE
-	b	1b
-1:
-	add	r0,r3,r5
-	std	r0,0(r4)
-	ld	r4,CPU_SPEC_SETUP(r3)
-	sub	r4,r4,r5
-	ld	r4,0(r4)
-	sub	r4,r4,r5
-	mtctr	r4
-	/* Calling convention for cpu setup is r3=offset, r4=cur_cpu_spec */
-	mr	r4,r3
-	mr	r3,r5
-	bctr
-
-/*
- * do_cpu_ftr_fixups - goes through the list of CPU feature fixups
- * and writes nop's over sections of code that don't apply for this cpu.
- * r3 = data offset (not changed)
- */
-_GLOBAL(do_cpu_ftr_fixups)
-	/* Get CPU 0 features */
-	LOADADDR(r6,cur_cpu_spec)
-	sub	r6,r6,r3
-	ld	r4,0(r6)
-	sub	r4,r4,r3
-	ld	r4,CPU_SPEC_FEATURES(r4)
-	/* Get the fixup table */
-	LOADADDR(r6,__start___ftr_fixup)
-	sub	r6,r6,r3
-	LOADADDR(r7,__stop___ftr_fixup)
-	sub	r7,r7,r3
-	/* Do the fixup */
-1:	cmpld	r6,r7
-	bgelr
-	addi	r6,r6,32
-	ld	r8,-32(r6)	/* mask */
-	and	r8,r8,r4
-	ld	r9,-24(r6)	/* value */
-	cmpld	r8,r9
-	beq	1b
-	ld	r8,-16(r6)	/* section begin */
-	ld	r9,-8(r6)	/* section end */
-	subf.	r9,r8,r9
-	beq	1b
-	/* write nops over the section of code */
-	/* todo: if large section, add a branch at the start of it */
-	srwi	r9,r9,2
-	mtctr	r9
-	sub	r8,r8,r3
-	lis	r0,0x60000000@h	/* nop */
-3:	stw	r0,0(r8)
-	andi.	r10,r4,CPU_FTR_SPLIT_ID_CACHE@l
-	beq	2f
-	dcbst	0,r8		/* suboptimal, but simpler */
-	sync
-	icbi	0,r8
-2:	addi	r8,r8,4
-	bdnz	3b
-	sync			/* additional sync needed on g4 */
-	isync
-	b	1b
-
-#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE)
-/*
- * Do an IO access in real mode
- */
-_GLOBAL(real_readb)
-	mfmsr	r7
-	ori	r0,r7,MSR_DR
-	xori	r0,r0,MSR_DR
-	sync
-	mtmsrd	r0
-	sync
-	isync
-	mfspr	r6,SPRN_HID4
-	rldicl	r5,r6,32,0
-	ori	r5,r5,0x100
-	rldicl	r5,r5,32,0
-	sync
-	mtspr	SPRN_HID4,r5
-	isync
-	slbia
-	isync
-	lbz	r3,0(r3)
-	sync
-	mtspr	SPRN_HID4,r6
-	isync
-	slbia
-	isync
-	mtmsrd	r7
-	sync
-	isync
-	blr
-
-	/*
- * Do an IO access in real mode
- */
-_GLOBAL(real_writeb)
-	mfmsr	r7
-	ori	r0,r7,MSR_DR
-	xori	r0,r0,MSR_DR
-	sync
-	mtmsrd	r0
-	sync
-	isync
-	mfspr	r6,SPRN_HID4
-	rldicl	r5,r6,32,0
-	ori	r5,r5,0x100
-	rldicl	r5,r5,32,0
-	sync
-	mtspr	SPRN_HID4,r5
-	isync
-	slbia
-	isync
-	stb	r3,0(r4)
-	sync
-	mtspr	SPRN_HID4,r6
-	isync
-	slbia
-	isync
-	mtmsrd	r7
-	sync
-	isync
-	blr
-#endif /* defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) */
-
-/*
- * Create a kernel thread
- *   kernel_thread(fn, arg, flags)
- */
-_GLOBAL(kernel_thread)
-	std	r29,-24(r1)
-	std	r30,-16(r1)
-	stdu	r1,-STACK_FRAME_OVERHEAD(r1)
-	mr	r29,r3
-	mr	r30,r4
-	ori	r3,r5,CLONE_VM	/* flags */
-	oris	r3,r3,(CLONE_UNTRACED>>16)
-	li	r4,0		/* new sp (unused) */
-	li	r0,__NR_clone
-	sc
-	cmpdi	0,r3,0		/* parent or child? */
-	bne	1f		/* return if parent */
-	li	r0,0
-	stdu	r0,-STACK_FRAME_OVERHEAD(r1)
-	ld	r2,8(r29)
-	ld	r29,0(r29)
-	mtlr	r29              /* fn addr in lr */
-	mr	r3,r30	        /* load arg and call fn */
-	blrl
-	li	r0,__NR_exit	/* exit after child exits */
-        li	r3,0
-	sc
-1:	addi	r1,r1,STACK_FRAME_OVERHEAD	
-	ld	r29,-24(r1)
-	ld	r30,-16(r1)
-	blr
-
-/*
- * disable_kernel_fp()
- * Disable the FPU.
- */
-_GLOBAL(disable_kernel_fp)
-	mfmsr	r3
-	rldicl	r0,r3,(63-MSR_FP_LG),1
-	rldicl	r3,r0,(MSR_FP_LG+1),0
-	mtmsrd	r3			/* disable use of fpu now */
-	isync
-	blr
-
-/*
- * giveup_fpu(tsk)
- * Disable FP for the task given as the argument,
- * and save the floating-point registers in its thread_struct.
- * Enables the FPU for use in the kernel on return.
- */
-_GLOBAL(giveup_fpu)
-	mfmsr	r5
-	ori	r5,r5,MSR_FP
-	mtmsrd	r5			/* enable use of fpu now */
-	isync
-	cmpdi	0,r3,0
-	beqlr-				/* if no previous owner, done */
-	addi	r3,r3,THREAD		/* want THREAD of task */
-	ld	r5,PT_REGS(r3)
-	cmpdi	0,r5,0
-	SAVE_32FPRS(0, r3)
-	mffs	fr0
-	stfd	fr0,THREAD_FPSCR(r3)
-	beq	1f
-	ld	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	li	r3,MSR_FP|MSR_FE0|MSR_FE1
-	andc	r4,r4,r3		/* disable FP for previous task */
-	std	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#ifndef CONFIG_SMP
-	li	r5,0
-	ld	r4,last_task_used_math@got(r2)
-	std	r5,0(r4)
-#endif /* CONFIG_SMP */
-	blr
-
-#ifdef CONFIG_ALTIVEC
-
-#if 0 /* this has no callers for now */
-/*
- * disable_kernel_altivec()
- * Disable the VMX.
- */
-_GLOBAL(disable_kernel_altivec)
-	mfmsr	r3
-	rldicl	r0,r3,(63-MSR_VEC_LG),1
-	rldicl	r3,r0,(MSR_VEC_LG+1),0
-	mtmsrd	r3			/* disable use of VMX now */
-	isync
-	blr
-#endif /* 0 */
-
-/*
- * giveup_altivec(tsk)
- * Disable VMX for the task given as the argument,
- * and save the vector registers in its thread_struct.
- * Enables the VMX for use in the kernel on return.
- */
-_GLOBAL(giveup_altivec)
-	mfmsr	r5
-	oris	r5,r5,MSR_VEC@h
-	mtmsrd	r5			/* enable use of VMX now */
-	isync
-	cmpdi	0,r3,0
-	beqlr-				/* if no previous owner, done */
-	addi	r3,r3,THREAD		/* want THREAD of task */
-	ld	r5,PT_REGS(r3)
-	cmpdi	0,r5,0
-	SAVE_32VRS(0,r4,r3)
-	mfvscr	vr0
-	li	r4,THREAD_VSCR
-	stvx	vr0,r4,r3
-	beq	1f
-	ld	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	lis	r3,MSR_VEC@h
-	andc	r4,r4,r3		/* disable FP for previous task */
-	std	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#ifndef CONFIG_SMP
-	li	r5,0
-	ld	r4,last_task_used_altivec@got(r2)
-	std	r5,0(r4)
-#endif /* CONFIG_SMP */
-	blr
-
-#endif /* CONFIG_ALTIVEC */
-
-_GLOBAL(__setup_cpu_power3)
-	blr
-
-/* kexec_wait(phys_cpu)
- *
- * wait for the flag to change, indicating this kernel is going away but
- * the slave code for the next one is at addresses 0 to 100.
- *
- * This is used by all slaves.
- *
- * Physical (hardware) cpu id should be in r3.
- */
-_GLOBAL(kexec_wait)
-	bl	1f
-1:	mflr	r5
-	addi	r5,r5,kexec_flag-1b
-
-99:	HMT_LOW
-#ifdef CONFIG_KEXEC		/* use no memory without kexec */
-	lwz	r4,0(r5)
-	cmpwi	0,r4,0
-	bnea	0x60
-#endif
-	b	99b
-
-/* this can be in text because we won't change it until we are
- * running in real anyways
- */
-kexec_flag:
-	.long	0
-
-
-#ifdef CONFIG_KEXEC
-
-/* kexec_smp_wait(void)
- *
- * call with interrupts off
- * note: this is a terminal routine, it does not save lr
- *
- * get phys id from paca
- * set paca id to -1 to say we got here
- * switch to real mode
- * join other cpus in kexec_wait(phys_id)
- */
-_GLOBAL(kexec_smp_wait)
-	lhz	r3,PACAHWCPUID(r13)
-	li	r4,-1
-	sth	r4,PACAHWCPUID(r13)	/* let others know we left */
-	bl	real_mode
-	b	.kexec_wait
-
-/*
- * switch to real mode (turn mmu off)
- * we use the early kernel trick that the hardware ignores bits
- * 0 and 1 (big endian) of the effective address in real mode
- *
- * don't overwrite r3 here, it is live for kexec_wait above.
- */
-real_mode:	/* assume normal blr return */
-1:	li	r9,MSR_RI
-	li	r10,MSR_DR|MSR_IR
-	mflr	r11		/* return address to SRR0 */
-	mfmsr	r12
-	andc	r9,r12,r9
-	andc	r10,r12,r10
-
-	mtmsrd	r9,1
-	mtspr	SPRN_SRR1,r10
-	mtspr	SPRN_SRR0,r11
-	rfid
-
-
-/*
- * kexec_sequence(newstack, start, image, control, clear_all())
- *
- * does the grungy work with stack switching and real mode switches
- * also does simple calls to other code
- */
-
-_GLOBAL(kexec_sequence)
-	mflr	r0
-	std	r0,16(r1)
-
-	/* switch stacks to newstack -- &kexec_stack.stack */
-	stdu	r1,THREAD_SIZE-112(r3)
-	mr	r1,r3
-
-	li	r0,0
-	std	r0,16(r1)
-
-	/* save regs for local vars on new stack.
-	 * yes, we won't go back, but ...
-	 */
-	std	r31,-8(r1)
-	std	r30,-16(r1)
-	std	r29,-24(r1)
-	std	r28,-32(r1)
-	std	r27,-40(r1)
-	std	r26,-48(r1)
-	std	r25,-56(r1)
-
-	stdu	r1,-112-64(r1)
-
-	/* save args into preserved regs */
-	mr	r31,r3			/* newstack (both) */
-	mr	r30,r4			/* start (real) */
-	mr	r29,r5			/* image (virt) */
-	mr	r28,r6			/* control, unused */
-	mr	r27,r7			/* clear_all() fn desc */
-	mr	r26,r8			/* spare */
-	lhz	r25,PACAHWCPUID(r13)	/* get our phys cpu from paca */
-
-	/* disable interrupts, we are overwriting kernel data next */
-	mfmsr	r3
-	rlwinm	r3,r3,0,17,15
-	mtmsrd	r3,1
-
-	/* copy dest pages, flush whole dest image */
-	mr	r3,r29
-	bl	.kexec_copy_flush	/* (image) */
-
-	/* turn off mmu */
-	bl	real_mode
-
-	/* clear out hardware hash page table and tlb */
-	ld	r5,0(r27)		/* deref function descriptor */
-	mtctr	r5
-	bctrl				/* ppc_md.hash_clear_all(void); */
-
-/*
- *   kexec image calling is:
- *      the first 0x100 bytes of the entry point are copied to 0
- *
- *      all slaves branch to slave = 0x60 (absolute)
- *              slave(phys_cpu_id);
- *
- *      master goes to start = entry point
- *              start(phys_cpu_id, start, 0);
- *
- *
- *   a wrapper is needed to call existing kernels, here is an approximate
- *   description of one method:
- *
- * v2: (2.6.10)
- *   start will be near the boot_block (maybe 0x100 bytes before it?)
- *   it will have a 0x60, which will b to boot_block, where it will wait
- *   and 0 will store phys into struct boot-block and load r3 from there,
- *   copy kernel 0-0x100 and tell slaves to back down to 0x60 again
- *
- * v1: (2.6.9)
- *    boot block will have all cpus scanning device tree to see if they
- *    are the boot cpu ?????
- *    other device tree differences (prop sizes, va vs pa, etc)...
- */
-
-	/* copy  0x100 bytes starting at start to 0 */
-	li	r3,0
-	mr	r4,r30
-	li	r5,0x100
-	li	r6,0
-	bl	.copy_and_flush	/* (dest, src, copy limit, start offset) */
-1:	/* assume normal blr return */
-
-	/* release other cpus to the new kernel secondary start at 0x60 */
-	mflr	r5
-	li	r6,1
-	stw	r6,kexec_flag-1b(5)
-	mr	r3,r25	# my phys cpu
-	mr	r4,r30	# start, aka phys mem offset
-	mtlr	4
-	li	r5,0
-	blr	/* image->start(physid, image->start, 0); */
-#endif /* CONFIG_KEXEC */
-
-/* Why isn't this a) automatic, b) written in 'C'? */	
-	.balign 8
-_GLOBAL(sys_call_table32)
-	.llong .sys_restart_syscall	/* 0 */
-	.llong .sys_exit
-	.llong .ppc_fork
-	.llong .sys_read
-	.llong .sys_write
-	.llong .compat_sys_open		/* 5 */
-	.llong .sys_close
-	.llong .sys32_waitpid
-	.llong .sys32_creat
-	.llong .sys_link
-	.llong .sys_unlink      	/* 10 */
-	.llong .sys32_execve
-	.llong .sys_chdir
-	.llong .compat_sys_time
-	.llong .sys_mknod
-	.llong .sys_chmod		/* 15 */
-	.llong .sys_lchown
-	.llong .sys_ni_syscall		/* old break syscall */
-	.llong .sys_ni_syscall		/* old stat syscall */
-	.llong .ppc32_lseek
-	.llong .sys_getpid              /* 20 */
-	.llong .compat_sys_mount
-	.llong .sys_oldumount
-	.llong .sys_setuid
-	.llong .sys_getuid
-	.llong .compat_sys_stime	/* 25 */
-	.llong .sys32_ptrace
-	.llong .sys_alarm
-	.llong .sys_ni_syscall		/* old fstat syscall */
-	.llong .sys32_pause
-	.llong .compat_sys_utime		/* 30 */
-	.llong .sys_ni_syscall		/* old stty syscall */
-	.llong .sys_ni_syscall		/* old gtty syscall */
-	.llong .sys32_access
-	.llong .sys32_nice
-	.llong .sys_ni_syscall		/* 35 - old ftime syscall */
-	.llong .sys_sync
-	.llong .sys32_kill
-	.llong .sys_rename
-	.llong .sys32_mkdir
-	.llong .sys_rmdir		/* 40 */
-	.llong .sys_dup
-	.llong .sys_pipe
-	.llong .compat_sys_times
-	.llong .sys_ni_syscall		/* old prof syscall */
-	.llong .sys_brk			/* 45 */
-	.llong .sys_setgid
-	.llong .sys_getgid
-	.llong .sys_signal
-	.llong .sys_geteuid
-	.llong .sys_getegid		/* 50 */
-	.llong .sys_acct
-	.llong .sys_umount
-	.llong .sys_ni_syscall		/* old lock syscall */
-	.llong .compat_sys_ioctl
-	.llong .compat_sys_fcntl		/* 55 */
-	.llong .sys_ni_syscall		/* old mpx syscall */
-	.llong .sys32_setpgid
-	.llong .sys_ni_syscall		/* old ulimit syscall */
-	.llong .sys32_olduname
-	.llong .sys32_umask		/* 60 */
-	.llong .sys_chroot
-	.llong .sys_ustat
-	.llong .sys_dup2
-	.llong .sys_getppid
-	.llong .sys_getpgrp	        /* 65 */
-	.llong .sys_setsid
-	.llong .sys32_sigaction
-	.llong .sys_sgetmask
-	.llong .sys32_ssetmask
-	.llong .sys_setreuid	        /* 70 */
-	.llong .sys_setregid
-	.llong .ppc32_sigsuspend
-	.llong .compat_sys_sigpending
-	.llong .sys32_sethostname
-	.llong .compat_sys_setrlimit	        /* 75 */
-	.llong .compat_sys_old_getrlimit
-	.llong .compat_sys_getrusage
-	.llong .sys32_gettimeofday
-	.llong .sys32_settimeofday
-	.llong .sys32_getgroups	        /* 80 */
-	.llong .sys32_setgroups
-	.llong .sys_ni_syscall		/* old select syscall */
-	.llong .sys_symlink
-	.llong .sys_ni_syscall		/* old lstat syscall */
-	.llong .sys32_readlink	        /* 85 */
-	.llong .sys_uselib
-	.llong .sys_swapon
-	.llong .sys_reboot
-	.llong .old32_readdir
-	.llong .sys_mmap		/* 90 */
-	.llong .sys_munmap
-	.llong .sys_truncate
-	.llong .sys_ftruncate
-	.llong .sys_fchmod
-	.llong .sys_fchown              /* 95 */
-	.llong .sys32_getpriority
-	.llong .sys32_setpriority
-	.llong .sys_ni_syscall		/* old profil syscall */
-	.llong .compat_sys_statfs
-	.llong .compat_sys_fstatfs		/* 100 */
-	.llong .sys_ni_syscall		/* old ioperm syscall */
-	.llong .compat_sys_socketcall
-	.llong .sys32_syslog
-	.llong .compat_sys_setitimer
-	.llong .compat_sys_getitimer		/* 105 */
-	.llong .compat_sys_newstat
-	.llong .compat_sys_newlstat
-	.llong .compat_sys_newfstat
-	.llong .sys32_uname
-	.llong .sys_ni_syscall		/* 110 old iopl syscall */
-	.llong .sys_vhangup
-	.llong .sys_ni_syscall		/* old idle syscall */
-	.llong .sys_ni_syscall		/* old vm86 syscall */
-	.llong .compat_sys_wait4
-	.llong .sys_swapoff		/* 115 */
-	.llong .sys32_sysinfo
-	.llong .sys32_ipc
-	.llong .sys_fsync
-	.llong .ppc32_sigreturn
-	.llong .ppc_clone		/* 120 */
-	.llong .sys32_setdomainname
-	.llong .ppc64_newuname
-	.llong .sys_ni_syscall		/* old modify_ldt syscall */
-	.llong .sys32_adjtimex
-	.llong .sys_mprotect		/* 125 */
-	.llong .compat_sys_sigprocmask
-	.llong .sys_ni_syscall		/* old create_module syscall */
-	.llong .sys_init_module
-	.llong .sys_delete_module
-	.llong .sys_ni_syscall		/* 130 old get_kernel_syms syscall */
-	.llong .sys_quotactl
-	.llong .sys32_getpgid
-	.llong .sys_fchdir
-	.llong .sys_bdflush
-	.llong .sys32_sysfs		/* 135 */
-	.llong .ppc64_personality
-	.llong .sys_ni_syscall	        /* for afs_syscall */
-	.llong .sys_setfsuid
-	.llong .sys_setfsgid
-	.llong .sys_llseek	        /* 140 */
-        .llong .sys32_getdents
-	.llong .ppc32_select
-	.llong .sys_flock
-	.llong .sys_msync
-	.llong .compat_sys_readv	/* 145 */
-	.llong .compat_sys_writev
-	.llong .sys32_getsid
-	.llong .sys_fdatasync
-	.llong .sys32_sysctl
-	.llong .sys_mlock		/* 150 */
-	.llong .sys_munlock
-	.llong .sys_mlockall
-	.llong .sys_munlockall
-	.llong .sys32_sched_setparam
-	.llong .sys32_sched_getparam	/* 155 */
-	.llong .sys32_sched_setscheduler
-	.llong .sys32_sched_getscheduler
-	.llong .sys_sched_yield
-	.llong .sys32_sched_get_priority_max
-	.llong .sys32_sched_get_priority_min  /* 160 */
-	.llong .sys32_sched_rr_get_interval
-	.llong .compat_sys_nanosleep
-	.llong .sys_mremap
-	.llong .sys_setresuid
-	.llong .sys_getresuid	        /* 165 */
-	.llong .sys_ni_syscall		/* old query_module syscall */
-	.llong .sys_poll
-	.llong .compat_sys_nfsservctl
-	.llong .sys_setresgid
-	.llong .sys_getresgid	        /* 170 */
-	.llong .sys32_prctl
-	.llong .ppc32_rt_sigreturn
-	.llong .sys32_rt_sigaction
-	.llong .sys32_rt_sigprocmask
-	.llong .sys32_rt_sigpending     /* 175 */
-	.llong .compat_sys_rt_sigtimedwait
-	.llong .sys32_rt_sigqueueinfo
-	.llong .ppc32_rt_sigsuspend
-	.llong .sys32_pread64
-	.llong .sys32_pwrite64	        /* 180 */
-	.llong .sys_chown
-	.llong .sys_getcwd
-	.llong .sys_capget
-	.llong .sys_capset
-	.llong .sys32_sigaltstack	/* 185 */
-	.llong .sys32_sendfile
-	.llong .sys_ni_syscall		/* reserved for streams1 */
-	.llong .sys_ni_syscall		/* reserved for streams2 */
-	.llong .ppc_vfork
-	.llong .compat_sys_getrlimit	        /* 190 */
-	.llong .sys32_readahead
-	.llong .sys32_mmap2
-	.llong .sys32_truncate64
-	.llong .sys32_ftruncate64
-	.llong .sys_stat64      	/* 195 */
-	.llong .sys_lstat64
-	.llong .sys_fstat64
-	.llong .sys32_pciconfig_read
-	.llong .sys32_pciconfig_write
-	.llong .sys32_pciconfig_iobase	/* 200 - pciconfig_iobase */
-	.llong .sys_ni_syscall		/* reserved for MacOnLinux */
-	.llong .sys_getdents64
-	.llong .sys_pivot_root
-	.llong .compat_sys_fcntl64
-	.llong .sys_madvise		/* 205 */
-	.llong .sys_mincore
-	.llong .sys_gettid
-	.llong .sys_tkill
-	.llong .sys_setxattr
-	.llong .sys_lsetxattr		/* 210 */
-	.llong .sys_fsetxattr
-	.llong .sys_getxattr
-	.llong .sys_lgetxattr
-	.llong .sys_fgetxattr
-	.llong .sys_listxattr		/* 215 */
-	.llong .sys_llistxattr
-	.llong .sys_flistxattr
-	.llong .sys_removexattr
-	.llong .sys_lremovexattr
-	.llong .sys_fremovexattr	/* 220 */
-	.llong .compat_sys_futex
-	.llong .compat_sys_sched_setaffinity
-	.llong .compat_sys_sched_getaffinity
-	.llong .sys_ni_syscall
-	.llong .sys_ni_syscall		/* 225 - reserved for tux */
-	.llong .sys32_sendfile64
-	.llong .compat_sys_io_setup
-	.llong .sys_io_destroy
-	.llong .compat_sys_io_getevents
-	.llong .compat_sys_io_submit
-	.llong .sys_io_cancel
-	.llong .sys_set_tid_address
-	.llong .ppc32_fadvise64
-	.llong .sys_exit_group
-	.llong .ppc32_lookup_dcookie	/* 235 */
-	.llong .sys_epoll_create
-	.llong .sys_epoll_ctl
-	.llong .sys_epoll_wait
-	.llong .sys_remap_file_pages
-	.llong .ppc32_timer_create	/* 240 */
-	.llong .compat_sys_timer_settime
-	.llong .compat_sys_timer_gettime
-	.llong .sys_timer_getoverrun
-	.llong .sys_timer_delete
-	.llong .compat_sys_clock_settime	/* 245 */
-	.llong .compat_sys_clock_gettime
-	.llong .compat_sys_clock_getres
-	.llong .compat_sys_clock_nanosleep
-	.llong .ppc32_swapcontext
-	.llong .sys32_tgkill		/* 250 */
-	.llong .sys32_utimes
-	.llong .compat_sys_statfs64
-	.llong .compat_sys_fstatfs64
-	.llong .ppc32_fadvise64_64	/* 32bit only fadvise64_64 */
-	.llong .ppc_rtas		/* 255 */
-	.llong .sys_ni_syscall		/* 256 reserved for sys_debug_setcontext */
-	.llong .sys_ni_syscall		/* 257 reserved for vserver */
-	.llong .sys_ni_syscall		/* 258 reserved for new sys_remap_file_pages */
-	.llong .compat_sys_mbind
-	.llong .compat_sys_get_mempolicy	/* 260 */
-	.llong .compat_sys_set_mempolicy
-	.llong .compat_sys_mq_open
-	.llong .sys_mq_unlink
-	.llong .compat_sys_mq_timedsend
-	.llong .compat_sys_mq_timedreceive /* 265 */
-	.llong .compat_sys_mq_notify
-	.llong .compat_sys_mq_getsetattr
-	.llong .compat_sys_kexec_load
-	.llong .sys32_add_key
-	.llong .sys32_request_key	/* 270 */
-	.llong .compat_sys_keyctl
-	.llong .compat_sys_waitid
-	.llong .sys32_ioprio_set
-	.llong .sys32_ioprio_get
-	.llong .sys_inotify_init	/* 275 */
-	.llong .sys_inotify_add_watch
-	.llong .sys_inotify_rm_watch
-
-	.balign 8
-_GLOBAL(sys_call_table)
-	.llong .sys_restart_syscall	/* 0 */
-	.llong .sys_exit
-	.llong .ppc_fork
-	.llong .sys_read
-	.llong .sys_write
-	.llong .sys_open		/* 5 */
-	.llong .sys_close
-	.llong .sys_waitpid
-	.llong .sys_creat
-	.llong .sys_link
-	.llong .sys_unlink		/* 10 */
-	.llong .sys_execve
-	.llong .sys_chdir
-	.llong .sys64_time
-	.llong .sys_mknod
-	.llong .sys_chmod		/* 15 */
-	.llong .sys_lchown
-	.llong .sys_ni_syscall		/* old break syscall */
-	.llong .sys_ni_syscall		/* old stat syscall */
-	.llong .sys_lseek
-	.llong .sys_getpid		/* 20 */
-	.llong .sys_mount
-	.llong .sys_ni_syscall		/* old umount syscall */
-	.llong .sys_setuid
-	.llong .sys_getuid
-	.llong .sys_stime		/* 25 */
-	.llong .sys_ptrace
-	.llong .sys_alarm
-	.llong .sys_ni_syscall		/* old fstat syscall */
-	.llong .sys_pause
-	.llong .sys_utime		/* 30 */
-	.llong .sys_ni_syscall		/* old stty syscall */
-	.llong .sys_ni_syscall		/* old gtty syscall */
-	.llong .sys_access
-	.llong .sys_nice
-	.llong .sys_ni_syscall		/* 35 - old ftime syscall */
-	.llong .sys_sync
-	.llong .sys_kill
-	.llong .sys_rename
-	.llong .sys_mkdir
-	.llong .sys_rmdir		/* 40 */
-	.llong .sys_dup
-	.llong .sys_pipe
-	.llong .sys_times
-	.llong .sys_ni_syscall		/* old prof syscall */
-	.llong .sys_brk			/* 45 */
-	.llong .sys_setgid
-	.llong .sys_getgid
-	.llong .sys_signal
-	.llong .sys_geteuid
-	.llong .sys_getegid		/* 50 */
-	.llong .sys_acct
-	.llong .sys_umount
-	.llong .sys_ni_syscall		/* old lock syscall */
-	.llong .sys_ioctl
-	.llong .sys_fcntl		/* 55 */
-	.llong .sys_ni_syscall		/* old mpx syscall */
-	.llong .sys_setpgid
-	.llong .sys_ni_syscall		/* old ulimit syscall */
-	.llong .sys_ni_syscall		/* old uname syscall */
-	.llong .sys_umask		/* 60 */
-	.llong .sys_chroot
-	.llong .sys_ustat
-	.llong .sys_dup2
-	.llong .sys_getppid
-	.llong .sys_getpgrp		/* 65 */
-	.llong .sys_setsid
-	.llong .sys_ni_syscall
-	.llong .sys_sgetmask
-	.llong .sys_ssetmask
-	.llong .sys_setreuid		/* 70 */
-	.llong .sys_setregid
-	.llong .sys_ni_syscall
-	.llong .sys_ni_syscall
-	.llong .sys_sethostname
-	.llong .sys_setrlimit		/* 75 */
-	.llong .sys_ni_syscall		/* old getrlimit syscall */
-	.llong .sys_getrusage
-	.llong .sys_gettimeofday
-	.llong .sys_settimeofday
-	.llong .sys_getgroups		/* 80 */
-	.llong .sys_setgroups
-	.llong .sys_ni_syscall		/* old select syscall */
-	.llong .sys_symlink
-	.llong .sys_ni_syscall		/* old lstat syscall */
-	.llong .sys_readlink		/* 85 */
-	.llong .sys_uselib
-	.llong .sys_swapon
-	.llong .sys_reboot
-	.llong .sys_ni_syscall		/* old readdir syscall */
-	.llong .sys_mmap		/* 90 */
-	.llong .sys_munmap
-	.llong .sys_truncate
-	.llong .sys_ftruncate
-	.llong .sys_fchmod
-	.llong .sys_fchown		/* 95 */
-	.llong .sys_getpriority
-	.llong .sys_setpriority
-	.llong .sys_ni_syscall		/* old profil syscall holder */
-	.llong .sys_statfs
-	.llong .sys_fstatfs		/* 100 */
-	.llong .sys_ni_syscall		/* old ioperm syscall */
-	.llong .sys_socketcall
-	.llong .sys_syslog
-	.llong .sys_setitimer
-	.llong .sys_getitimer		/* 105 */
-	.llong .sys_newstat
-	.llong .sys_newlstat
-	.llong .sys_newfstat
-	.llong .sys_ni_syscall		/* old uname syscall */
-	.llong .sys_ni_syscall		/* 110 old iopl syscall */
-	.llong .sys_vhangup
-	.llong .sys_ni_syscall		/* old idle syscall */
-	.llong .sys_ni_syscall		/* old vm86 syscall */
-	.llong .sys_wait4
-	.llong .sys_swapoff		/* 115 */
-	.llong .sys_sysinfo
-	.llong .sys_ipc
-	.llong .sys_fsync
-	.llong .sys_ni_syscall
-	.llong .ppc_clone		/* 120 */
-	.llong .sys_setdomainname
-	.llong .ppc64_newuname
-	.llong .sys_ni_syscall		/* old modify_ldt syscall */
-	.llong .sys_adjtimex
-	.llong .sys_mprotect		/* 125 */
-	.llong .sys_ni_syscall
-	.llong .sys_ni_syscall		/* old create_module syscall */
-	.llong .sys_init_module
-	.llong .sys_delete_module
-	.llong .sys_ni_syscall		/* 130 old get_kernel_syms syscall */
-	.llong .sys_quotactl
-	.llong .sys_getpgid
-	.llong .sys_fchdir
-	.llong .sys_bdflush
-	.llong .sys_sysfs		/* 135 */
-	.llong .ppc64_personality
-	.llong .sys_ni_syscall	        /* for afs_syscall */
-	.llong .sys_setfsuid
-	.llong .sys_setfsgid
-	.llong .sys_llseek	        /* 140 */
-        .llong .sys_getdents
-	.llong .sys_select
-	.llong .sys_flock
-	.llong .sys_msync
-	.llong .sys_readv		/* 145 */
-	.llong .sys_writev
-	.llong .sys_getsid
-	.llong .sys_fdatasync
-	.llong .sys_sysctl
-	.llong .sys_mlock		/* 150 */
-	.llong .sys_munlock
-	.llong .sys_mlockall
-	.llong .sys_munlockall
-	.llong .sys_sched_setparam
-	.llong .sys_sched_getparam	/* 155 */
-	.llong .sys_sched_setscheduler
-	.llong .sys_sched_getscheduler
-	.llong .sys_sched_yield
-	.llong .sys_sched_get_priority_max
-	.llong .sys_sched_get_priority_min  /* 160 */
-	.llong .sys_sched_rr_get_interval
-	.llong .sys_nanosleep
-	.llong .sys_mremap
-	.llong .sys_setresuid
-	.llong .sys_getresuid	        /* 165 */
-	.llong .sys_ni_syscall		/* old query_module syscall */
-	.llong .sys_poll
-	.llong .sys_nfsservctl
-	.llong .sys_setresgid
-	.llong .sys_getresgid	        /* 170 */
-	.llong .sys_prctl
-	.llong .ppc64_rt_sigreturn
-	.llong .sys_rt_sigaction
-	.llong .sys_rt_sigprocmask	
-	.llong .sys_rt_sigpending	/* 175 */
-	.llong .sys_rt_sigtimedwait
-	.llong .sys_rt_sigqueueinfo
-	.llong .ppc64_rt_sigsuspend
-	.llong .sys_pread64
-	.llong .sys_pwrite64	        /* 180 */
-	.llong .sys_chown
-	.llong .sys_getcwd
-	.llong .sys_capget
-	.llong .sys_capset
-	.llong .sys_sigaltstack	        /* 185 */
-	.llong .sys_sendfile64
-	.llong .sys_ni_syscall		/* reserved for streams1 */
-	.llong .sys_ni_syscall		/* reserved for streams2 */
-	.llong .ppc_vfork
-	.llong .sys_getrlimit	        /* 190 */
-	.llong .sys_readahead
-	.llong .sys_ni_syscall		/* 32bit only mmap2 */
-	.llong .sys_ni_syscall		/* 32bit only truncate64 */
-	.llong .sys_ni_syscall		/* 32bit only ftruncate64 */
-	.llong .sys_ni_syscall		/* 195 - 32bit only stat64 */
-	.llong .sys_ni_syscall		/* 32bit only lstat64 */
-	.llong .sys_ni_syscall		/* 32bit only fstat64 */
-	.llong .sys_pciconfig_read
-	.llong .sys_pciconfig_write
-	.llong .sys_pciconfig_iobase	/* 200 - pciconfig_iobase */
-	.llong .sys_ni_syscall		/* reserved for MacOnLinux */
-	.llong .sys_getdents64
-	.llong .sys_pivot_root
-	.llong .sys_ni_syscall		/* 32bit only fcntl64 */
-	.llong .sys_madvise		/* 205 */
-	.llong .sys_mincore
-	.llong .sys_gettid
-	.llong .sys_tkill
-	.llong .sys_setxattr
-	.llong .sys_lsetxattr		/* 210 */
-	.llong .sys_fsetxattr
-	.llong .sys_getxattr
-	.llong .sys_lgetxattr
-	.llong .sys_fgetxattr
-	.llong .sys_listxattr		/* 215 */
-	.llong .sys_llistxattr
-	.llong .sys_flistxattr
-	.llong .sys_removexattr
-	.llong .sys_lremovexattr
-	.llong .sys_fremovexattr	/* 220 */
-	.llong .sys_futex
-	.llong .sys_sched_setaffinity
-	.llong .sys_sched_getaffinity
-	.llong .sys_ni_syscall
-	.llong .sys_ni_syscall		/* 225 - reserved for tux */
-	.llong .sys_ni_syscall		/* 32bit only sendfile64 */
-	.llong .sys_io_setup
-	.llong .sys_io_destroy
-	.llong .sys_io_getevents
-	.llong .sys_io_submit		/* 230 */
-	.llong .sys_io_cancel
-	.llong .sys_set_tid_address
-	.llong .sys_fadvise64
-	.llong .sys_exit_group
-	.llong .sys_lookup_dcookie	/* 235 */
-	.llong .sys_epoll_create
-	.llong .sys_epoll_ctl
-	.llong .sys_epoll_wait
-	.llong .sys_remap_file_pages
-	.llong .sys_timer_create	/* 240 */
-	.llong .sys_timer_settime
-	.llong .sys_timer_gettime
-	.llong .sys_timer_getoverrun
-	.llong .sys_timer_delete
-	.llong .sys_clock_settime	/* 245 */
-	.llong .sys_clock_gettime
-	.llong .sys_clock_getres
-	.llong .sys_clock_nanosleep
-	.llong .ppc64_swapcontext
-	.llong .sys_tgkill		/* 250 */
-	.llong .sys_utimes
-	.llong .sys_statfs64
-	.llong .sys_fstatfs64
-	.llong .sys_ni_syscall		/* 32bit only fadvise64_64 */
-	.llong .ppc_rtas		/* 255 */
-	.llong .sys_ni_syscall		/* 256 reserved for sys_debug_setcontext */
-	.llong .sys_ni_syscall		/* 257 reserved for vserver */
-	.llong .sys_ni_syscall		/* 258 reserved for new sys_remap_file_pages */
-	.llong .sys_mbind
-	.llong .sys_get_mempolicy	/* 260 */
-	.llong .sys_set_mempolicy
-	.llong .sys_mq_open
-	.llong .sys_mq_unlink
-	.llong .sys_mq_timedsend
-	.llong .sys_mq_timedreceive	/* 265 */
-	.llong .sys_mq_notify
-	.llong .sys_mq_getsetattr
-	.llong .sys_kexec_load
-	.llong .sys_add_key
-	.llong .sys_request_key		/* 270 */
-	.llong .sys_keyctl
-	.llong .sys_waitid
-	.llong .sys_ioprio_set
-	.llong .sys_ioprio_get
-	.llong .sys_inotify_init	/* 275 */
-	.llong .sys_inotify_add_watch
-	.llong .sys_inotify_rm_watch
diff --git a/arch/ppc64/kernel/mpic.h b/arch/ppc64/kernel/mpic.h
deleted file mode 100644
index ca78a7f10528..000000000000
--- a/arch/ppc64/kernel/mpic.h
+++ /dev/null
@@ -1,273 +0,0 @@
-#include <linux/irq.h>
-
-/*
- * Global registers
- */
-
-#define MPIC_GREG_BASE			0x01000
-
-#define MPIC_GREG_FEATURE_0		0x00000
-#define		MPIC_GREG_FEATURE_LAST_SRC_MASK		0x07ff0000
-#define		MPIC_GREG_FEATURE_LAST_SRC_SHIFT	16
-#define		MPIC_GREG_FEATURE_LAST_CPU_MASK		0x00001f00
-#define		MPIC_GREG_FEATURE_LAST_CPU_SHIFT	8
-#define		MPIC_GREG_FEATURE_VERSION_MASK		0xff
-#define MPIC_GREG_FEATURE_1		0x00010
-#define MPIC_GREG_GLOBAL_CONF_0		0x00020
-#define		MPIC_GREG_GCONF_RESET			0x80000000
-#define		MPIC_GREG_GCONF_8259_PTHROU_DIS		0x20000000
-#define		MPIC_GREG_GCONF_BASE_MASK		0x000fffff
-#define MPIC_GREG_GLOBAL_CONF_1		0x00030
-#define MPIC_GREG_VENDOR_0		0x00040
-#define MPIC_GREG_VENDOR_1		0x00050
-#define MPIC_GREG_VENDOR_2		0x00060
-#define MPIC_GREG_VENDOR_3		0x00070
-#define MPIC_GREG_VENDOR_ID		0x00080
-#define 	MPIC_GREG_VENDOR_ID_STEPPING_MASK	0x00ff0000
-#define 	MPIC_GREG_VENDOR_ID_STEPPING_SHIFT	16
-#define 	MPIC_GREG_VENDOR_ID_DEVICE_ID_MASK	0x0000ff00
-#define 	MPIC_GREG_VENDOR_ID_DEVICE_ID_SHIFT	8
-#define 	MPIC_GREG_VENDOR_ID_VENDOR_ID_MASK	0x000000ff
-#define MPIC_GREG_PROCESSOR_INIT	0x00090
-#define MPIC_GREG_IPI_VECTOR_PRI_0	0x000a0
-#define MPIC_GREG_IPI_VECTOR_PRI_1	0x000b0
-#define MPIC_GREG_IPI_VECTOR_PRI_2	0x000c0
-#define MPIC_GREG_IPI_VECTOR_PRI_3	0x000d0
-#define MPIC_GREG_SPURIOUS		0x000e0
-#define MPIC_GREG_TIMER_FREQ		0x000f0
-
-/*
- *
- * Timer registers
- */
-#define MPIC_TIMER_BASE			0x01100
-#define MPIC_TIMER_STRIDE		0x40
-
-#define MPIC_TIMER_CURRENT_CNT		0x00000
-#define MPIC_TIMER_BASE_CNT		0x00010
-#define MPIC_TIMER_VECTOR_PRI		0x00020
-#define MPIC_TIMER_DESTINATION		0x00030
-
-/*
- * Per-Processor registers
- */
-
-#define MPIC_CPU_THISBASE		0x00000
-#define MPIC_CPU_BASE			0x20000
-#define MPIC_CPU_STRIDE			0x01000
-
-#define MPIC_CPU_IPI_DISPATCH_0		0x00040
-#define MPIC_CPU_IPI_DISPATCH_1		0x00050
-#define MPIC_CPU_IPI_DISPATCH_2		0x00060
-#define MPIC_CPU_IPI_DISPATCH_3		0x00070
-#define MPIC_CPU_CURRENT_TASK_PRI	0x00080
-#define 	MPIC_CPU_TASKPRI_MASK			0x0000000f
-#define MPIC_CPU_WHOAMI			0x00090
-#define 	MPIC_CPU_WHOAMI_MASK			0x0000001f
-#define MPIC_CPU_INTACK			0x000a0
-#define MPIC_CPU_EOI			0x000b0
-
-/*
- * Per-source registers
- */
-
-#define MPIC_IRQ_BASE			0x10000
-#define MPIC_IRQ_STRIDE			0x00020
-#define MPIC_IRQ_VECTOR_PRI		0x00000
-#define 	MPIC_VECPRI_MASK			0x80000000
-#define 	MPIC_VECPRI_ACTIVITY			0x40000000	/* Read Only */
-#define 	MPIC_VECPRI_PRIORITY_MASK		0x000f0000
-#define 	MPIC_VECPRI_PRIORITY_SHIFT		16
-#define 	MPIC_VECPRI_VECTOR_MASK			0x000007ff
-#define 	MPIC_VECPRI_POLARITY_POSITIVE		0x00800000
-#define 	MPIC_VECPRI_POLARITY_NEGATIVE		0x00000000
-#define 	MPIC_VECPRI_POLARITY_MASK		0x00800000
-#define 	MPIC_VECPRI_SENSE_LEVEL			0x00400000
-#define 	MPIC_VECPRI_SENSE_EDGE			0x00000000
-#define 	MPIC_VECPRI_SENSE_MASK			0x00400000
-#define MPIC_IRQ_DESTINATION		0x00010
-
-#define MPIC_MAX_IRQ_SOURCES	2048
-#define MPIC_MAX_CPUS		32
-#define MPIC_MAX_ISU		32
-
-/*
- * Special vector numbers (internal use only)
- */
-#define MPIC_VEC_SPURRIOUS	255
-#define MPIC_VEC_IPI_3		254
-#define MPIC_VEC_IPI_2		253
-#define MPIC_VEC_IPI_1		252
-#define MPIC_VEC_IPI_0		251
-
-/* unused */
-#define MPIC_VEC_TIMER_3	250
-#define MPIC_VEC_TIMER_2	249
-#define MPIC_VEC_TIMER_1	248
-#define MPIC_VEC_TIMER_0	247
-
-/* Type definition of the cascade handler */
-typedef int (*mpic_cascade_t)(struct pt_regs *regs, void *data);
-
-#ifdef CONFIG_MPIC_BROKEN_U3
-/* Fixup table entry */
-struct mpic_irq_fixup
-{
-	u8 __iomem	*base;
-	unsigned int   irq;
-};
-#endif /* CONFIG_MPIC_BROKEN_U3 */
-
-
-/* The instance data of a given MPIC */
-struct mpic
-{
-	/* The "linux" controller struct */
-	hw_irq_controller	hc_irq;
-#ifdef CONFIG_SMP
-	hw_irq_controller	hc_ipi;
-#endif
-	const char		*name;
-	/* Flags */
-	unsigned int		flags;
-	/* How many irq sources in a given ISU */
-	unsigned int		isu_size;
-	unsigned int		isu_shift;
-	unsigned int		isu_mask;
-	/* Offset of irq vector numbers */
-	unsigned int		irq_offset;	
-	unsigned int		irq_count;
-	/* Offset of ipi vector numbers */
-	unsigned int		ipi_offset;
-	/* Number of sources */
-	unsigned int		num_sources;
-	/* Number of CPUs */
-	unsigned int		num_cpus;
-	/* cascade handler */
-	mpic_cascade_t		cascade;
-	void			*cascade_data;
-	unsigned int		cascade_vec;
-	/* senses array */
-	unsigned char		*senses;
-	unsigned int		senses_count;
-
-#ifdef CONFIG_MPIC_BROKEN_U3
-	/* The fixup table */
-	struct mpic_irq_fixup	*fixups;
-	spinlock_t		fixup_lock;
-#endif
-
-	/* The various ioremap'ed bases */
-	volatile u32 __iomem	*gregs;
-	volatile u32 __iomem	*tmregs;
-	volatile u32 __iomem	*cpuregs[MPIC_MAX_CPUS];
-	volatile u32 __iomem	*isus[MPIC_MAX_ISU];
-
-	/* link */
-	struct mpic		*next;
-};
-
-/* This is the primary controller, only that one has IPIs and
- * has afinity control. A non-primary MPIC always uses CPU0
- * registers only
- */
-#define MPIC_PRIMARY			0x00000001
-/* Set this for a big-endian MPIC */
-#define MPIC_BIG_ENDIAN			0x00000002
-/* Broken U3 MPIC */
-#define MPIC_BROKEN_U3			0x00000004
-/* Broken IPI registers (autodetected) */
-#define MPIC_BROKEN_IPI			0x00000008
-/* MPIC wants a reset */
-#define MPIC_WANTS_RESET		0x00000010
-
-/* Allocate the controller structure and setup the linux irq descs
- * for the range if interrupts passed in. No HW initialization is
- * actually performed.
- * 
- * @phys_addr:	physial base address of the MPIC
- * @flags:	flags, see constants above
- * @isu_size:	number of interrupts in an ISU. Use 0 to use a
- *              standard ISU-less setup (aka powermac)
- * @irq_offset: first irq number to assign to this mpic
- * @irq_count:  number of irqs to use with this mpic IRQ sources. Pass 0
- *	        to match the number of sources
- * @ipi_offset: first irq number to assign to this mpic IPI sources,
- *		used only on primary mpic
- * @senses:	array of sense values
- * @senses_num: number of entries in the array
- *
- * Note about the sense array. If none is passed, all interrupts are
- * setup to be level negative unless MPIC_BROKEN_U3 is set in which
- * case they are edge positive (and the array is ignored anyway).
- * The values in the array start at the first source of the MPIC,
- * that is senses[0] correspond to linux irq "irq_offset".
- */
-extern struct mpic *mpic_alloc(unsigned long phys_addr,
-			       unsigned int flags,
-			       unsigned int isu_size,
-			       unsigned int irq_offset,
-			       unsigned int irq_count,
-			       unsigned int ipi_offset,
-			       unsigned char *senses,
-			       unsigned int senses_num,
-			       const char *name);
-
-/* Assign ISUs, to call before mpic_init()
- *
- * @mpic:	controller structure as returned by mpic_alloc()
- * @isu_num:	ISU number
- * @phys_addr:	physical address of the ISU
- */
-extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
-			    unsigned long phys_addr);
-
-/* Initialize the controller. After this has been called, none of the above
- * should be called again for this mpic
- */
-extern void mpic_init(struct mpic *mpic);
-
-/* Setup a cascade. Currently, only one cascade is supported this
- * way, though you can always do a normal request_irq() and add
- * other cascades this way. You should call this _after_ having
- * added all the ISUs
- *
- * @irq_no:	"linux" irq number of the cascade (that is offset'ed vector)
- * @handler:	cascade handler function
- */
-extern void mpic_setup_cascade(unsigned int irq_no, mpic_cascade_t hanlder,
-			       void *data);
-
-/*
- * All of the following functions must only be used after the
- * ISUs have been assigned and the controller fully initialized
- * with mpic_init()
- */
-
-
-/* Change/Read the priority of an interrupt. Default is 8 for irqs and
- * 10 for IPIs. You can call this on both IPIs and IRQ numbers, but the
- * IPI number is then the offset'ed (linux irq number mapped to the IPI)
- */
-extern void mpic_irq_set_priority(unsigned int irq, unsigned int pri);
-extern unsigned int mpic_irq_get_priority(unsigned int irq);
-
-/* Setup a non-boot CPU */
-extern void mpic_setup_this_cpu(void);
-
-/* Clean up for kexec (or cpu offline or ...) */
-extern void mpic_teardown_this_cpu(int secondary);
-
-/* Request IPIs on primary mpic */
-extern void mpic_request_ipis(void);
-
-/* Send an IPI (non offseted number 0..3) */
-extern void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask);
-
-/* Fetch interrupt from a given mpic */
-extern int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs);
-/* This one gets to the primary mpic */
-extern int mpic_get_irq(struct pt_regs *regs);
-
-/* global mpic for pSeries */
-extern struct mpic *pSeries_mpic;
diff --git a/arch/ppc64/kernel/pci.h b/arch/ppc64/kernel/pci.h
deleted file mode 100644
index 5eb2cc320566..000000000000
--- a/arch/ppc64/kernel/pci.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * c 2001 PPC 64 Team, IBM Corp
- *
- *      This program is free software; you can redistribute it and/or
- *      modify it under the terms of the GNU General Public License
- *      as published by the Free Software Foundation; either version
- *      2 of the License, or (at your option) any later version.
- */
-#ifndef __PPC_KERNEL_PCI_H__
-#define __PPC_KERNEL_PCI_H__
-
-#include <linux/pci.h>
-#include <asm/pci-bridge.h>
-
-extern unsigned long isa_io_base;
-
-extern void pci_setup_pci_controller(struct pci_controller *hose);
-extern void pci_setup_phb_io(struct pci_controller *hose, int primary);
-extern void pci_setup_phb_io_dynamic(struct pci_controller *hose, int primary);
-
-
-extern struct list_head hose_list;
-extern int global_phb_number;
-
-extern unsigned long find_and_init_phbs(void);
-
-extern struct pci_dev *ppc64_isabridge_dev;	/* may be NULL if no ISA bus */
-
-/* PCI device_node operations */
-struct device_node;
-typedef void *(*traverse_func)(struct device_node *me, void *data);
-void *traverse_pci_devices(struct device_node *start, traverse_func pre,
-		void *data);
-
-void pci_devs_phb_init(void);
-void pci_devs_phb_init_dynamic(struct pci_controller *phb);
-
-/* PCI address cache management routines */
-void pci_addr_cache_insert_device(struct pci_dev *dev);
-void pci_addr_cache_remove_device(struct pci_dev *dev);
-
-/* From rtas_pci.h */
-void init_pci_config_tokens (void);
-unsigned long get_phb_buid (struct device_node *);
-
-/* From pSeries_pci.h */
-extern void pSeries_final_fixup(void);
-extern void pSeries_irq_bus_setup(struct pci_bus *bus);
-
-extern unsigned long pci_probe_only;
-extern unsigned long pci_assign_all_buses;
-extern int pci_read_irq_line(struct pci_dev *pci_dev);
-
-#endif /* __PPC_KERNEL_PCI_H__ */
diff --git a/arch/ppc64/kernel/pmac.h b/arch/ppc64/kernel/pmac.h
deleted file mode 100644
index 40e1c5030f74..000000000000
--- a/arch/ppc64/kernel/pmac.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef __PMAC_H__
-#define __PMAC_H__
-
-#include <linux/pci.h>
-#include <linux/ide.h>
-
-/*
- * Declaration for the various functions exported by the
- * pmac_* files. Mostly for use by pmac_setup
- */
-
-extern void pmac_get_boot_time(struct rtc_time *tm);
-extern void pmac_get_rtc_time(struct rtc_time *tm);
-extern int  pmac_set_rtc_time(struct rtc_time *tm);
-extern void pmac_read_rtc_time(void);
-extern void pmac_calibrate_decr(void);
-
-extern void pmac_pcibios_fixup(void);
-extern void pmac_pci_init(void);
-extern void pmac_setup_pci_dma(void);
-extern void pmac_check_ht_link(void);
-
-extern void pmac_setup_smp(void);
-
-extern unsigned long pmac_ide_get_base(int index);
-extern void pmac_ide_init_hwif_ports(hw_regs_t *hw,
-	unsigned long data_port, unsigned long ctrl_port, int *irq);
-
-extern void pmac_nvram_init(void);
-
-#endif /* __PMAC_H__ */
diff --git a/arch/ppc64/kernel/pmac_feature.c b/arch/ppc64/kernel/pmac_feature.c
deleted file mode 100644
index eb4e6c3f694d..000000000000
--- a/arch/ppc64/kernel/pmac_feature.c
+++ /dev/null
@@ -1,767 +0,0 @@
-/*
- *  arch/ppc/platforms/pmac_feature.c
- *
- *  Copyright (C) 1996-2001 Paul Mackerras (paulus@cs.anu.edu.au)
- *                          Ben. Herrenschmidt (benh@kernel.crashing.org)
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- *  TODO:
- *
- *   - Replace mdelay with some schedule loop if possible
- *   - Shorten some obfuscated delays on some routines (like modem
- *     power)
- *   - Refcount some clocks (see darwin)
- *   - Split split split...
- *
- */
-#include <linux/config.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/adb.h>
-#include <linux/pmu.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <asm/sections.h>
-#include <asm/errno.h>
-#include <asm/keylargo.h>
-#include <asm/uninorth.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/machdep.h>
-#include <asm/pmac_feature.h>
-#include <asm/dbdma.h>
-#include <asm/pci-bridge.h>
-#include <asm/pmac_low_i2c.h>
-
-#undef DEBUG_FEATURE
-
-#ifdef DEBUG_FEATURE
-#define DBG(fmt...) printk(KERN_DEBUG fmt)
-#else
-#define DBG(fmt...)
-#endif
-
-/*
- * We use a single global lock to protect accesses. Each driver has
- * to take care of its own locking
- */
-static DEFINE_SPINLOCK(feature_lock  __pmacdata);
-
-#define LOCK(flags)	spin_lock_irqsave(&feature_lock, flags);
-#define UNLOCK(flags)	spin_unlock_irqrestore(&feature_lock, flags);
-
-
-/*
- * Instance of some macio stuffs
- */
-struct macio_chip macio_chips[MAX_MACIO_CHIPS]  __pmacdata;
-
-struct macio_chip* __pmac macio_find(struct device_node* child, int type)
-{
-	while(child) {
-		int	i;
-
-		for (i=0; i < MAX_MACIO_CHIPS && macio_chips[i].of_node; i++)
-			if (child == macio_chips[i].of_node &&
-			    (!type || macio_chips[i].type == type))
-				return &macio_chips[i];
-		child = child->parent;
-	}
-	return NULL;
-}
-EXPORT_SYMBOL_GPL(macio_find);
-
-static const char* macio_names[] __pmacdata =
-{
-	"Unknown",
-	"Grand Central",
-	"OHare",
-	"OHareII",
-	"Heathrow",
-	"Gatwick",
-	"Paddington",
-	"Keylargo",
-	"Pangea",
-	"Intrepid",
-	"K2"
-};
-
-
-
-/*
- * Uninorth reg. access. Note that Uni-N regs are big endian
- */
-
-#define UN_REG(r)	(uninorth_base + ((r) >> 2))
-#define UN_IN(r)	(in_be32(UN_REG(r)))
-#define UN_OUT(r,v)	(out_be32(UN_REG(r), (v)))
-#define UN_BIS(r,v)	(UN_OUT((r), UN_IN(r) | (v)))
-#define UN_BIC(r,v)	(UN_OUT((r), UN_IN(r) & ~(v)))
-
-static struct device_node* uninorth_node __pmacdata;
-static u32* uninorth_base __pmacdata;
-static u32 uninorth_rev __pmacdata;
-static void *u3_ht;
-
-extern struct device_node *k2_skiplist[2];
-
-/*
- * For each motherboard family, we have a table of functions pointers
- * that handle the various features.
- */
-
-typedef long (*feature_call)(struct device_node* node, long param, long value);
-
-struct feature_table_entry {
-	unsigned int	selector;
-	feature_call	function;
-};
-
-struct pmac_mb_def
-{
-	const char*			model_string;
-	const char*			model_name;
-	int				model_id;
-	struct feature_table_entry* 	features;
-	unsigned long			board_flags;
-};
-static struct pmac_mb_def pmac_mb __pmacdata;
-
-/*
- * Here are the chip specific feature functions
- */
-
-
-static long __pmac g5_read_gpio(struct device_node* node, long param, long value)
-{
-	struct macio_chip* macio = &macio_chips[0];
-
-	return MACIO_IN8(param);
-}
-
-
-static long __pmac g5_write_gpio(struct device_node* node, long param, long value)
-{
-	struct macio_chip* macio = &macio_chips[0];
-
-	MACIO_OUT8(param, (u8)(value & 0xff));
-	return 0;
-}
-
-static long __pmac g5_gmac_enable(struct device_node* node, long param, long value)
-{
-	struct macio_chip* macio = &macio_chips[0];
-	unsigned long flags;
-
-	if (node == NULL)
-		return -ENODEV;
-
-	LOCK(flags);
-	if (value) {
-		MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE);
-		mb();
-		k2_skiplist[0] = NULL;
-	} else {
-		k2_skiplist[0] = node;
-		mb();
-		MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE);
-	}
-	
-	UNLOCK(flags);
-	mdelay(1);
-
-	return 0;
-}
-
-static long __pmac g5_fw_enable(struct device_node* node, long param, long value)
-{
-	struct macio_chip* macio = &macio_chips[0];
-	unsigned long flags;
-
-	if (node == NULL)
-		return -ENODEV;
-
-	LOCK(flags);
-	if (value) {
-		MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE);
-		mb();
-		k2_skiplist[1] = NULL;
-	} else {
-		k2_skiplist[1] = node;
-		mb();
-		MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE);
-	}
-	
-	UNLOCK(flags);
-	mdelay(1);
-
-	return 0;
-}
-
-static long __pmac g5_mpic_enable(struct device_node* node, long param, long value)
-{
-	unsigned long flags;
-
-	if (node->parent == NULL || strcmp(node->parent->name, "u3"))
-		return 0;
-
-	LOCK(flags);
-	UN_BIS(U3_TOGGLE_REG, U3_MPIC_RESET | U3_MPIC_OUTPUT_ENABLE);
-	UNLOCK(flags);
-
-	return 0;
-}
-
-static long __pmac g5_eth_phy_reset(struct device_node* node, long param, long value)
-{
-	struct macio_chip* macio = &macio_chips[0];
-	struct device_node *phy;
-	int need_reset;
-
-	/*
-	 * We must not reset the combo PHYs, only the BCM5221 found in
-	 * the iMac G5.
-	 */
-	phy = of_get_next_child(node, NULL);
-	if (!phy)
-		return -ENODEV;
-	need_reset = device_is_compatible(phy, "B5221");
-	of_node_put(phy);
-	if (!need_reset)
-		return 0;
-
-	/* PHY reset is GPIO 29, not in device-tree unfortunately */
-	MACIO_OUT8(K2_GPIO_EXTINT_0 + 29,
-		   KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA);
-	/* Thankfully, this is now always called at a time when we can
-	 * schedule by sungem.
-	 */
-	msleep(10);
-	MACIO_OUT8(K2_GPIO_EXTINT_0 + 29, 0);
-
-	return 0;
-}
-
-static long __pmac g5_i2s_enable(struct device_node *node, long param, long value)
-{
-	/* Very crude implementation for now */
-	struct macio_chip* macio = &macio_chips[0];
-	unsigned long flags;
-
-	if (value == 0)
-		return 0; /* don't disable yet */
-
-	LOCK(flags);
-	MACIO_BIS(KEYLARGO_FCR3, KL3_CLK45_ENABLE | KL3_CLK49_ENABLE |
-		  KL3_I2S0_CLK18_ENABLE);
-	udelay(10);
-	MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_I2S0_CELL_ENABLE |
-		  K2_FCR1_I2S0_CLK_ENABLE_BIT | K2_FCR1_I2S0_ENABLE);
-	udelay(10);
-	MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_I2S0_RESET);
-	UNLOCK(flags);
-	udelay(10);
-
-	return 0;
-}
-
-
-#ifdef CONFIG_SMP
-static long __pmac g5_reset_cpu(struct device_node* node, long param, long value)
-{
-	unsigned int reset_io = 0;
-	unsigned long flags;
-	struct macio_chip* macio;
-	struct device_node* np;
-
-	macio = &macio_chips[0];
-	if (macio->type != macio_keylargo2)
-		return -ENODEV;
-
-	np = find_path_device("/cpus");
-	if (np == NULL)
-		return -ENODEV;
-	for (np = np->child; np != NULL; np = np->sibling) {
-		u32* num = (u32 *)get_property(np, "reg", NULL);
-		u32* rst = (u32 *)get_property(np, "soft-reset", NULL);
-		if (num == NULL || rst == NULL)
-			continue;
-		if (param == *num) {
-			reset_io = *rst;
-			break;
-		}
-	}
-	if (np == NULL || reset_io == 0)
-		return -ENODEV;
-
-	LOCK(flags);
-	MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE);
-	(void)MACIO_IN8(reset_io);
-	udelay(1);
-	MACIO_OUT8(reset_io, 0);
-	(void)MACIO_IN8(reset_io);
-	UNLOCK(flags);
-
-	return 0;
-}
-#endif /* CONFIG_SMP */
-
-/*
- * This can be called from pmac_smp so isn't static
- *
- * This takes the second CPU off the bus on dual CPU machines
- * running UP
- */
-void __pmac g5_phy_disable_cpu1(void)
-{
-	UN_OUT(U3_API_PHY_CONFIG_1, 0);
-}
-
-static long __pmac generic_get_mb_info(struct device_node* node, long param, long value)
-{
-	switch(param) {
-		case PMAC_MB_INFO_MODEL:
-			return pmac_mb.model_id;
-		case PMAC_MB_INFO_FLAGS:
-			return pmac_mb.board_flags;
-		case PMAC_MB_INFO_NAME:			
-			/* hack hack hack... but should work */
-			*((const char **)value) = pmac_mb.model_name;
-			return 0;
-	}
-	return -EINVAL;
-}
-
-
-/*
- * Table definitions
- */
-
-/* Used on any machine
- */
-static struct feature_table_entry any_features[]  __pmacdata = {
-	{ PMAC_FTR_GET_MB_INFO,		generic_get_mb_info },
-	{ 0, NULL }
-};
-
-/* G5 features
- */
-static struct feature_table_entry g5_features[]  __pmacdata = {
-	{ PMAC_FTR_GMAC_ENABLE,		g5_gmac_enable },
-	{ PMAC_FTR_1394_ENABLE,		g5_fw_enable },
-	{ PMAC_FTR_ENABLE_MPIC,		g5_mpic_enable },
-	{ PMAC_FTR_READ_GPIO,		g5_read_gpio },
-	{ PMAC_FTR_WRITE_GPIO,		g5_write_gpio },
-	{ PMAC_FTR_GMAC_PHY_RESET,	g5_eth_phy_reset },
-	{ PMAC_FTR_SOUND_CHIP_ENABLE,	g5_i2s_enable },
-#ifdef CONFIG_SMP
-	{ PMAC_FTR_RESET_CPU,		g5_reset_cpu },
-#endif /* CONFIG_SMP */
-	{ 0, NULL }
-};
-
-static struct pmac_mb_def pmac_mb_defs[] __pmacdata = {
-	{	"PowerMac7,2",			"PowerMac G5",
-		PMAC_TYPE_POWERMAC_G5,		g5_features,
-		0,
-	},
-	{	"PowerMac7,3",			"PowerMac G5",
-		PMAC_TYPE_POWERMAC_G5,		g5_features,
-		0,
-	},
-	{	"PowerMac8,1",			"iMac G5",
-		PMAC_TYPE_IMAC_G5,		g5_features,
-		0,
-	},
-	{	"PowerMac9,1",			"PowerMac G5",
-		PMAC_TYPE_POWERMAC_G5_U3L,	g5_features,
-		0,
-	},
-	{       "RackMac3,1",                   "XServe G5",
-		PMAC_TYPE_XSERVE_G5,		g5_features,
-		0,
-	},
-};
-
-/*
- * The toplevel feature_call callback
- */
-long __pmac pmac_do_feature_call(unsigned int selector, ...)
-{
-	struct device_node* node;
-	long param, value;
-	int i;
-	feature_call func = NULL;
-	va_list args;
-
-	if (pmac_mb.features)
-		for (i=0; pmac_mb.features[i].function; i++)
-			if (pmac_mb.features[i].selector == selector) {
-				func = pmac_mb.features[i].function;
-				break;
-			}
-	if (!func)
-		for (i=0; any_features[i].function; i++)
-			if (any_features[i].selector == selector) {
-				func = any_features[i].function;
-				break;
-			}
-	if (!func)
-		return -ENODEV;
-
-	va_start(args, selector);
-	node = (struct device_node*)va_arg(args, void*);
-	param = va_arg(args, long);
-	value = va_arg(args, long);
-	va_end(args);
-
-	return func(node, param, value);
-}
-
-static int __init probe_motherboard(void)
-{
-	int i;
-	struct macio_chip* macio = &macio_chips[0];
-	const char* model = NULL;
-	struct device_node *dt;
-
-	/* Lookup known motherboard type in device-tree. First try an
-	 * exact match on the "model" property, then try a "compatible"
-	 * match is none is found.
-	 */
-	dt = find_devices("device-tree");
-	if (dt != NULL)
-		model = (const char *) get_property(dt, "model", NULL);
-	for(i=0; model && i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) {
-	    if (strcmp(model, pmac_mb_defs[i].model_string) == 0) {
-		pmac_mb = pmac_mb_defs[i];
-		goto found;
-	    }
-	}
-	for(i=0; i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) {
-	    if (machine_is_compatible(pmac_mb_defs[i].model_string)) {
-		pmac_mb = pmac_mb_defs[i];
-		goto found;
-	    }
-	}
-
-	/* Fallback to selection depending on mac-io chip type */
-	switch(macio->type) {
-	case macio_keylargo2:
-		pmac_mb.model_id = PMAC_TYPE_UNKNOWN_K2;
-		pmac_mb.model_name = "Unknown K2-based";
-	    	pmac_mb.features = g5_features;
-		
-	default:
-	    	return -ENODEV;
-	}
-found:
-	/* Check for "mobile" machine */
-	if (model && (strncmp(model, "PowerBook", 9) == 0
-		   || strncmp(model, "iBook", 5) == 0))
-		pmac_mb.board_flags |= PMAC_MB_MOBILE;
-
-
-	printk(KERN_INFO "PowerMac motherboard: %s\n", pmac_mb.model_name);
-	return 0;
-}
-
-/* Initialize the Core99 UniNorth host bridge and memory controller
- */
-static void __init probe_uninorth(void)
-{
-	uninorth_node = of_find_node_by_name(NULL, "u3");
-	if (uninorth_node && uninorth_node->n_addrs > 0) {
-		/* Small hack until I figure out if parsing in prom.c is correct. I should
-		 * get rid of those pre-parsed junk anyway
-		 */
-		unsigned long address = uninorth_node->addrs[0].address;
-		uninorth_base = ioremap(address, 0x40000);
-		uninorth_rev = in_be32(UN_REG(UNI_N_VERSION));
-		u3_ht = ioremap(address + U3_HT_CONFIG_BASE, 0x1000);
-	} else
-		uninorth_node = NULL;
-
-	if (!uninorth_node)
-		return;
-
-	printk(KERN_INFO "Found U3 memory controller & host bridge, revision: %d\n",
-	       uninorth_rev);
-	printk(KERN_INFO "Mapped at 0x%08lx\n", (unsigned long)uninorth_base);
-
-}
-
-static void __init probe_one_macio(const char* name, const char* compat, int type)
-{
-	struct device_node*	node;
-	int			i;
-	volatile u32*		base;
-	u32*			revp;
-
-	node = find_devices(name);
-	if (!node || !node->n_addrs)
-		return;
-	if (compat)
-		do {
-			if (device_is_compatible(node, compat))
-				break;
-			node = node->next;
-		} while (node);
-	if (!node)
-		return;
-	for(i=0; i<MAX_MACIO_CHIPS; i++) {
-		if (!macio_chips[i].of_node)
-			break;
-		if (macio_chips[i].of_node == node)
-			return;
-	}
-	if (i >= MAX_MACIO_CHIPS) {
-		printk(KERN_ERR "pmac_feature: Please increase MAX_MACIO_CHIPS !\n");
-		printk(KERN_ERR "pmac_feature: %s skipped\n", node->full_name);
-		return;
-	}
-	base = (volatile u32*)ioremap(node->addrs[0].address, node->addrs[0].size);
-	if (!base) {
-		printk(KERN_ERR "pmac_feature: Can't map mac-io chip !\n");
-		return;
-	}
-	if (type == macio_keylargo) {
-		u32* did = (u32 *)get_property(node, "device-id", NULL);
-		if (*did == 0x00000025)
-			type = macio_pangea;
-		if (*did == 0x0000003e)
-			type = macio_intrepid;
-	}
-	macio_chips[i].of_node	= node;
-	macio_chips[i].type	= type;
-	macio_chips[i].base	= base;
-	macio_chips[i].flags	= MACIO_FLAG_SCCB_ON | MACIO_FLAG_SCCB_ON;
-	macio_chips[i].name 	= macio_names[type];
-	revp = (u32 *)get_property(node, "revision-id", NULL);
-	if (revp)
-		macio_chips[i].rev = *revp;
-	printk(KERN_INFO "Found a %s mac-io controller, rev: %d, mapped at 0x%p\n",
-		macio_names[type], macio_chips[i].rev, macio_chips[i].base);
-}
-
-static int __init
-probe_macios(void)
-{
-	probe_one_macio("mac-io", "K2-Keylargo", macio_keylargo2);
-
-	macio_chips[0].lbus.index = 0;
-	macio_chips[1].lbus.index = 1;
-
-	return (macio_chips[0].of_node == NULL) ? -ENODEV : 0;
-}
-
-static void __init
-set_initial_features(void)
-{
-	struct device_node *np;
-
-	if (macio_chips[0].type == macio_keylargo2) {
-#ifndef CONFIG_SMP
-		/* On SMP machines running UP, we have the second CPU eating
-		 * bus cycles. We need to take it off the bus. This is done
-		 * from pmac_smp for SMP kernels running on one CPU
-		 */
-		np = of_find_node_by_type(NULL, "cpu");
-		if (np != NULL)
-			np = of_find_node_by_type(np, "cpu");
-		if (np != NULL) {
-			g5_phy_disable_cpu1();
-			of_node_put(np);
-		}
-#endif /* CONFIG_SMP */
-		/* Enable GMAC for now for PCI probing. It will be disabled
-		 * later on after PCI probe
-		 */
-		np = of_find_node_by_name(NULL, "ethernet");
-		while(np) {
-			if (device_is_compatible(np, "K2-GMAC"))
-				g5_gmac_enable(np, 0, 1);
-			np = of_find_node_by_name(np, "ethernet");
-		}
-
-		/* Enable FW before PCI probe. Will be disabled later on
-		 * Note: We should have a batter way to check that we are
-		 * dealing with uninorth internal cell and not a PCI cell
-		 * on the external PCI. The code below works though.
-		 */
-		np = of_find_node_by_name(NULL, "firewire");
-		while(np) {
-			if (device_is_compatible(np, "pci106b,5811")) {
-				macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED;
-				g5_fw_enable(np, 0, 1);
-			}
-			np = of_find_node_by_name(np, "firewire");
-		}
-	}
-}
-
-void __init
-pmac_feature_init(void)
-{
-	/* Detect the UniNorth memory controller */
-	probe_uninorth();
-
-	/* Probe mac-io controllers */
-	if (probe_macios()) {
-		printk(KERN_WARNING "No mac-io chip found\n");
-		return;
-	}
-
-	/* Setup low-level i2c stuffs */
-	pmac_init_low_i2c();
-
-	/* Probe machine type */
-	if (probe_motherboard())
-		printk(KERN_WARNING "Unknown PowerMac !\n");
-
-	/* Set some initial features (turn off some chips that will
-	 * be later turned on)
-	 */
-	set_initial_features();
-}
-
-int __init pmac_feature_late_init(void)
-{
-#if 0
-	struct device_node* np;
-
-	/* Request some resources late */
-	if (uninorth_node)
-		request_OF_resource(uninorth_node, 0, NULL);
-	np = find_devices("hammerhead");
-	if (np)
-		request_OF_resource(np, 0, NULL);
-	np = find_devices("interrupt-controller");
-	if (np)
-		request_OF_resource(np, 0, NULL);
-#endif
-	return 0;
-}
-
-device_initcall(pmac_feature_late_init);
-
-#if 0
-static void dump_HT_speeds(char *name, u32 cfg, u32 frq)
-{
-	int	freqs[16] = { 200,300,400,500,600,800,1000,0,0,0,0,0,0,0,0,0 };
-	int	bits[8] = { 8,16,0,32,2,4,0,0 };
-	int	freq = (frq >> 8) & 0xf;
-
-	if (freqs[freq] == 0)
-		printk("%s: Unknown HT link frequency %x\n", name, freq);
-	else
-		printk("%s: %d MHz on main link, (%d in / %d out) bits width\n",
-		       name, freqs[freq],
-		       bits[(cfg >> 28) & 0x7], bits[(cfg >> 24) & 0x7]);
-}
-#endif
-
-void __init pmac_check_ht_link(void)
-{
-#if 0 /* Disabled for now */
-	u32	ufreq, freq, ucfg, cfg;
-	struct device_node *pcix_node;
-	struct pci_dn *pdn;
-	u8  	px_bus, px_devfn;
-	struct pci_controller *px_hose;
-
-	(void)in_be32(u3_ht + U3_HT_LINK_COMMAND);
-	ucfg = cfg = in_be32(u3_ht + U3_HT_LINK_CONFIG);
-	ufreq = freq = in_be32(u3_ht + U3_HT_LINK_FREQ);
-	dump_HT_speeds("U3 HyperTransport", cfg, freq);
-
-	pcix_node = of_find_compatible_node(NULL, "pci", "pci-x");
-	if (pcix_node == NULL) {
-		printk("No PCI-X bridge found\n");
-		return;
-	}
-	pdn = pcix_node->data;
-	px_hose = pdn->phb;
-	px_bus = pdn->busno;
-	px_devfn = pdn->devfn;
-	
-	early_read_config_dword(px_hose, px_bus, px_devfn, 0xc4, &cfg);
-	early_read_config_dword(px_hose, px_bus, px_devfn, 0xcc, &freq);
-	dump_HT_speeds("PCI-X HT Uplink", cfg, freq);
-	early_read_config_dword(px_hose, px_bus, px_devfn, 0xc8, &cfg);
-	early_read_config_dword(px_hose, px_bus, px_devfn, 0xd0, &freq);
-	dump_HT_speeds("PCI-X HT Downlink", cfg, freq);
-#endif
-}
-
-/*
- * Early video resume hook
- */
-
-static void (*pmac_early_vresume_proc)(void *data) __pmacdata;
-static void *pmac_early_vresume_data __pmacdata;
-
-void pmac_set_early_video_resume(void (*proc)(void *data), void *data)
-{
-	if (_machine != _MACH_Pmac)
-		return;
-	preempt_disable();
-	pmac_early_vresume_proc = proc;
-	pmac_early_vresume_data = data;
-	preempt_enable();
-}
-EXPORT_SYMBOL(pmac_set_early_video_resume);
-
-
-/*
- * AGP related suspend/resume code
- */
-
-static struct pci_dev *pmac_agp_bridge __pmacdata;
-static int (*pmac_agp_suspend)(struct pci_dev *bridge) __pmacdata;
-static int (*pmac_agp_resume)(struct pci_dev *bridge) __pmacdata;
-
-void __pmac pmac_register_agp_pm(struct pci_dev *bridge,
-				 int (*suspend)(struct pci_dev *bridge),
-				 int (*resume)(struct pci_dev *bridge))
-{
-	if (suspend || resume) {
-		pmac_agp_bridge = bridge;
-		pmac_agp_suspend = suspend;
-		pmac_agp_resume = resume;
-		return;
-	}
-	if (bridge != pmac_agp_bridge)
-		return;
-	pmac_agp_suspend = pmac_agp_resume = NULL;
-	return;
-}
-EXPORT_SYMBOL(pmac_register_agp_pm);
-
-void __pmac pmac_suspend_agp_for_card(struct pci_dev *dev)
-{
-	if (pmac_agp_bridge == NULL || pmac_agp_suspend == NULL)
-		return;
-	if (pmac_agp_bridge->bus != dev->bus)
-		return;
-	pmac_agp_suspend(pmac_agp_bridge);
-}
-EXPORT_SYMBOL(pmac_suspend_agp_for_card);
-
-void __pmac pmac_resume_agp_for_card(struct pci_dev *dev)
-{
-	if (pmac_agp_bridge == NULL || pmac_agp_resume == NULL)
-		return;
-	if (pmac_agp_bridge->bus != dev->bus)
-		return;
-	pmac_agp_resume(pmac_agp_bridge);
-}
-EXPORT_SYMBOL(pmac_resume_agp_for_card);
diff --git a/arch/ppc64/kernel/pmac_pci.c b/arch/ppc64/kernel/pmac_pci.c
deleted file mode 100644
index dc40a0cad0b4..000000000000
--- a/arch/ppc64/kernel/pmac_pci.c
+++ /dev/null
@@ -1,793 +0,0 @@
-/*
- * Support for PCI bridges found on Power Macintoshes.
- * At present the "bandit" and "chaos" bridges are supported.
- * Fortunately you access configuration space in the same
- * way with either bridge.
- *
- * Copyright (C) 2003 Benjamin Herrenschmuidt (benh@kernel.crashing.org)
- * Copyright (C) 1997 Paul Mackerras (paulus@samba.org)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-
-#include <asm/sections.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/pci-bridge.h>
-#include <asm/machdep.h>
-#include <asm/pmac_feature.h>
-#include <asm/iommu.h>
-
-#include "pci.h"
-#include "pmac.h"
-
-#define DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-/* XXX Could be per-controller, but I don't think we risk anything by
- * assuming we won't have both UniNorth and Bandit */
-static int has_uninorth;
-static struct pci_controller *u3_agp;
-struct device_node *k2_skiplist[2];
-
-static int __init fixup_one_level_bus_range(struct device_node *node, int higher)
-{
-	for (; node != 0;node = node->sibling) {
-		int * bus_range;
-		unsigned int *class_code;
-		int len;
-
-		/* For PCI<->PCI bridges or CardBus bridges, we go down */
-		class_code = (unsigned int *) get_property(node, "class-code", NULL);
-		if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
-			(*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
-			continue;
-		bus_range = (int *) get_property(node, "bus-range", &len);
-		if (bus_range != NULL && len > 2 * sizeof(int)) {
-			if (bus_range[1] > higher)
-				higher = bus_range[1];
-		}
-		higher = fixup_one_level_bus_range(node->child, higher);
-	}
-	return higher;
-}
-
-/* This routine fixes the "bus-range" property of all bridges in the
- * system since they tend to have their "last" member wrong on macs
- *
- * Note that the bus numbers manipulated here are OF bus numbers, they
- * are not Linux bus numbers.
- */
-static void __init fixup_bus_range(struct device_node *bridge)
-{
-	int * bus_range;
-	int len;
-
-	/* Lookup the "bus-range" property for the hose */
-	bus_range = (int *) get_property(bridge, "bus-range", &len);
-	if (bus_range == NULL || len < 2 * sizeof(int)) {
-		printk(KERN_WARNING "Can't get bus-range for %s\n",
-			       bridge->full_name);
-		return;
-	}
-	bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]);
-}
-
-/*
- * Apple MacRISC (U3, UniNorth, Bandit, Chaos) PCI controllers.
- *
- * The "Bandit" version is present in all early PCI PowerMacs,
- * and up to the first ones using Grackle. Some machines may
- * have 2 bandit controllers (2 PCI busses).
- *
- * "Chaos" is used in some "Bandit"-type machines as a bridge
- * for the separate display bus. It is accessed the same
- * way as bandit, but cannot be probed for devices. It therefore
- * has its own config access functions.
- *
- * The "UniNorth" version is present in all Core99 machines
- * (iBook, G4, new IMacs, and all the recent Apple machines).
- * It contains 3 controllers in one ASIC.
- *
- * The U3 is the bridge used on G5 machines. It contains on
- * AGP bus which is dealt with the old UniNorth access routines
- * and an HyperTransport bus which uses its own set of access
- * functions.
- */
-
-#define MACRISC_CFA0(devfn, off)	\
-	((1 << (unsigned long)PCI_SLOT(dev_fn)) \
-	| (((unsigned long)PCI_FUNC(dev_fn)) << 8) \
-	| (((unsigned long)(off)) & 0xFCUL))
-
-#define MACRISC_CFA1(bus, devfn, off)	\
-	((((unsigned long)(bus)) << 16) \
-	|(((unsigned long)(devfn)) << 8) \
-	|(((unsigned long)(off)) & 0xFCUL) \
-	|1UL)
-
-static unsigned long __pmac macrisc_cfg_access(struct pci_controller* hose,
-					       u8 bus, u8 dev_fn, u8 offset)
-{
-	unsigned int caddr;
-
-	if (bus == hose->first_busno) {
-		if (dev_fn < (11 << 3))
-			return 0;
-		caddr = MACRISC_CFA0(dev_fn, offset);
-	} else
-		caddr = MACRISC_CFA1(bus, dev_fn, offset);
-
-	/* Uninorth will return garbage if we don't read back the value ! */
-	do {
-		out_le32(hose->cfg_addr, caddr);
-	} while (in_le32(hose->cfg_addr) != caddr);
-
-	offset &= has_uninorth ? 0x07 : 0x03;
-	return ((unsigned long)hose->cfg_data) + offset;
-}
-
-static int __pmac macrisc_read_config(struct pci_bus *bus, unsigned int devfn,
-				      int offset, int len, u32 *val)
-{
-	struct pci_controller *hose;
-	unsigned long addr;
-
-	hose = pci_bus_to_host(bus);
-	if (hose == NULL)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	addr = macrisc_cfg_access(hose, bus->number, devfn, offset);
-	if (!addr)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	/*
-	 * Note: the caller has already checked that offset is
-	 * suitably aligned and that len is 1, 2 or 4.
-	 */
-	switch (len) {
-	case 1:
-		*val = in_8((u8 *)addr);
-		break;
-	case 2:
-		*val = in_le16((u16 *)addr);
-		break;
-	default:
-		*val = in_le32((u32 *)addr);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int __pmac macrisc_write_config(struct pci_bus *bus, unsigned int devfn,
-				       int offset, int len, u32 val)
-{
-	struct pci_controller *hose;
-	unsigned long addr;
-
-	hose = pci_bus_to_host(bus);
-	if (hose == NULL)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	addr = macrisc_cfg_access(hose, bus->number, devfn, offset);
-	if (!addr)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	/*
-	 * Note: the caller has already checked that offset is
-	 * suitably aligned and that len is 1, 2 or 4.
-	 */
-	switch (len) {
-	case 1:
-		out_8((u8 *)addr, val);
-		(void) in_8((u8 *)addr);
-		break;
-	case 2:
-		out_le16((u16 *)addr, val);
-		(void) in_le16((u16 *)addr);
-		break;
-	default:
-		out_le32((u32 *)addr, val);
-		(void) in_le32((u32 *)addr);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops macrisc_pci_ops =
-{
-	macrisc_read_config,
-	macrisc_write_config
-};
-
-/*
- * These versions of U3 HyperTransport config space access ops do not
- * implement self-view of the HT host yet
- */
-
-/*
- * This function deals with some "special cases" devices.
- *
- *  0 -> No special case
- *  1 -> Skip the device but act as if the access was successfull
- *       (return 0xff's on reads, eventually, cache config space
- *       accesses in a later version)
- * -1 -> Hide the device (unsuccessful acess)
- */
-static int u3_ht_skip_device(struct pci_controller *hose,
-			     struct pci_bus *bus, unsigned int devfn)
-{
-	struct device_node *busdn, *dn;
-	int i;
-
-	/* We only allow config cycles to devices that are in OF device-tree
-	 * as we are apparently having some weird things going on with some
-	 * revs of K2 on recent G5s
-	 */
-	if (bus->self)
-		busdn = pci_device_to_OF_node(bus->self);
-	else
-		busdn = hose->arch_data;
-	for (dn = busdn->child; dn; dn = dn->sibling)
-		if (dn->data && PCI_DN(dn)->devfn == devfn)
-			break;
-	if (dn == NULL)
-		return -1;
-
-	/*
-	 * When a device in K2 is powered down, we die on config
-	 * cycle accesses. Fix that here.
-	 */
-	for (i=0; i<2; i++)
-		if (k2_skiplist[i] == dn)
-			return 1;
-
-	return 0;
-}
-
-#define U3_HT_CFA0(devfn, off)		\
-		((((unsigned long)devfn) << 8) | offset)
-#define U3_HT_CFA1(bus, devfn, off)	\
-		(U3_HT_CFA0(devfn, off) \
-		+ (((unsigned long)bus) << 16) \
-		+ 0x01000000UL)
-
-static unsigned long __pmac u3_ht_cfg_access(struct pci_controller* hose,
-					     u8 bus, u8 devfn, u8 offset)
-{
-	if (bus == hose->first_busno) {
-		/* For now, we don't self probe U3 HT bridge */
-		if (PCI_SLOT(devfn) == 0)
-			return 0;
-		return ((unsigned long)hose->cfg_data) + U3_HT_CFA0(devfn, offset);
-	} else
-		return ((unsigned long)hose->cfg_data) + U3_HT_CFA1(bus, devfn, offset);
-}
-
-static int __pmac u3_ht_read_config(struct pci_bus *bus, unsigned int devfn,
-				    int offset, int len, u32 *val)
-{
-	struct pci_controller *hose;
-	unsigned long addr;
-
-
-	hose = pci_bus_to_host(bus);      
-	if (hose == NULL)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
-	if (!addr)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	switch (u3_ht_skip_device(hose, bus, devfn)) {
-	case 0:
-		break;
-	case 1:
-		switch (len) {
-		case 1:
-			*val = 0xff; break;
-		case 2:
-			*val = 0xffff; break;
-		default:
-			*val = 0xfffffffful; break;
-		}
-		return PCIBIOS_SUCCESSFUL;
-	default:
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-	/*
-	 * Note: the caller has already checked that offset is
-	 * suitably aligned and that len is 1, 2 or 4.
-	 */
-	switch (len) {
-	case 1:
-		*val = in_8((u8 *)addr);
-		break;
-	case 2:
-		*val = in_le16((u16 *)addr);
-		break;
-	default:
-		*val = in_le32((u32 *)addr);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int __pmac u3_ht_write_config(struct pci_bus *bus, unsigned int devfn,
-				     int offset, int len, u32 val)
-{
-	struct pci_controller *hose;
-	unsigned long addr;
-
-	hose = pci_bus_to_host(bus);
-	if (hose == NULL)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
-	if (!addr)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	switch (u3_ht_skip_device(hose, bus, devfn)) {
-	case 0:
-		break;
-	case 1:
-		return PCIBIOS_SUCCESSFUL;
-	default:
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-	/*
-	 * Note: the caller has already checked that offset is
-	 * suitably aligned and that len is 1, 2 or 4.
-	 */
-	switch (len) {
-	case 1:
-		out_8((u8 *)addr, val);
-		(void) in_8((u8 *)addr);
-		break;
-	case 2:
-		out_le16((u16 *)addr, val);
-		(void) in_le16((u16 *)addr);
-		break;
-	default:
-		out_le32((u32 *)addr, val);
-		(void) in_le32((u32 *)addr);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops u3_ht_pci_ops =
-{
-	u3_ht_read_config,
-	u3_ht_write_config
-};
-
-static void __init setup_u3_agp(struct pci_controller* hose)
-{
-	/* On G5, we move AGP up to high bus number so we don't need
-	 * to reassign bus numbers for HT. If we ever have P2P bridges
-	 * on AGP, we'll have to move pci_assign_all_busses to the
-	 * pci_controller structure so we enable it for AGP and not for
-	 * HT childs.
-	 * We hard code the address because of the different size of
-	 * the reg address cell, we shall fix that by killing struct
-	 * reg_property and using some accessor functions instead
-	 */
-	hose->first_busno = 0xf0;
-	hose->last_busno = 0xff;
-	has_uninorth = 1;
-	hose->ops = &macrisc_pci_ops;
-	hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000);
-	hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000);
-
-	u3_agp = hose;
-}
-
-static void __init setup_u3_ht(struct pci_controller* hose)
-{
-	struct device_node *np = (struct device_node *)hose->arch_data;
-	int i, cur;
-
-	hose->ops = &u3_ht_pci_ops;
-
-	/* We hard code the address because of the different size of
-	 * the reg address cell, we shall fix that by killing struct
-	 * reg_property and using some accessor functions instead
-	 */
-	hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000, 0x02000000);
-
-	/*
-	 * /ht node doesn't expose a "ranges" property, so we "remove" regions that
-	 * have been allocated to AGP. So far, this version of the code doesn't assign
-	 * any of the 0xfxxxxxxx "fine" memory regions to /ht.
-	 * We need to fix that sooner or later by either parsing all child "ranges"
-	 * properties or figuring out the U3 address space decoding logic and
-	 * then read it's configuration register (if any).
-	 */
-	hose->io_base_phys = 0xf4000000;
-	hose->io_base_virt = ioremap(hose->io_base_phys, 0x00400000);
-	isa_io_base = pci_io_base = (unsigned long) hose->io_base_virt;
-	hose->io_resource.name = np->full_name;
-	hose->io_resource.start = 0;
-	hose->io_resource.end = 0x003fffff;
-	hose->io_resource.flags = IORESOURCE_IO;
-	hose->pci_mem_offset = 0;
-	hose->first_busno = 0;
-	hose->last_busno = 0xef;
-	hose->mem_resources[0].name = np->full_name;
-	hose->mem_resources[0].start = 0x80000000;
-	hose->mem_resources[0].end = 0xefffffff;
-	hose->mem_resources[0].flags = IORESOURCE_MEM;
-
-	if (u3_agp == NULL) {
-		DBG("U3 has no AGP, using full resource range\n");
-		return;
-	}
-
-	/* We "remove" the AGP resources from the resources allocated to HT, that
-	 * is we create "holes". However, that code does assumptions that so far
-	 * happen to be true (cross fingers...), typically that resources in the
-	 * AGP node are properly ordered
-	 */
-	cur = 0;
-	for (i=0; i<3; i++) {
-		struct resource *res = &u3_agp->mem_resources[i];
-		if (res->flags != IORESOURCE_MEM)
-			continue;
-		/* We don't care about "fine" resources */
-		if (res->start >= 0xf0000000)
-			continue;
-		/* Check if it's just a matter of "shrinking" us in one direction */
-		if (hose->mem_resources[cur].start == res->start) {
-			DBG("U3/HT: shrink start of %d, %08lx -> %08lx\n",
-			    cur, hose->mem_resources[cur].start, res->end + 1);
-			hose->mem_resources[cur].start = res->end + 1;
-			continue;
-		}
-		if (hose->mem_resources[cur].end == res->end) {
-			DBG("U3/HT: shrink end of %d, %08lx -> %08lx\n",
-			    cur, hose->mem_resources[cur].end, res->start - 1);
-			hose->mem_resources[cur].end = res->start - 1;
-			continue;
-		}
-		/* No, it's not the case, we need a hole */
-		if (cur == 2) {
-			/* not enough resources for a hole, we drop part of the range */
-			printk(KERN_WARNING "Running out of resources for /ht host !\n");
-			hose->mem_resources[cur].end = res->start - 1;
-			continue;
-		}		
-		cur++;
-		DBG("U3/HT: hole, %d end at %08lx, %d start at %08lx\n",
-		    cur-1, res->start - 1, cur, res->end + 1);
-		hose->mem_resources[cur].name = np->full_name;
-		hose->mem_resources[cur].flags = IORESOURCE_MEM;
-		hose->mem_resources[cur].start = res->end + 1;
-		hose->mem_resources[cur].end = hose->mem_resources[cur-1].end;
-		hose->mem_resources[cur-1].end = res->start - 1;
-	}
-}
-
-static void __init pmac_process_bridge_OF_ranges(struct pci_controller *hose,
-			   struct device_node *dev, int primary)
-{
-	static unsigned int static_lc_ranges[2024];
-	unsigned int *dt_ranges, *lc_ranges, *ranges, *prev;
-	unsigned int size;
-	int rlen = 0, orig_rlen;
-	int memno = 0;
-	struct resource *res;
-	int np, na = prom_n_addr_cells(dev);
-
-	np = na + 5;
-
-	/* First we try to merge ranges to fix a problem with some pmacs
-	 * that can have more than 3 ranges, fortunately using contiguous
-	 * addresses -- BenH
-	 */
-	dt_ranges = (unsigned int *) get_property(dev, "ranges", &rlen);
-	if (!dt_ranges)
-		return;
-	/*	lc_ranges = alloc_bootmem(rlen);*/
-	lc_ranges = static_lc_ranges;
-	if (!lc_ranges)
-		return; /* what can we do here ? */
-	memcpy(lc_ranges, dt_ranges, rlen);
-	orig_rlen = rlen;
-
-	/* Let's work on a copy of the "ranges" property instead of damaging
-	 * the device-tree image in memory
-	 */
-	ranges = lc_ranges;
-	prev = NULL;
-	while ((rlen -= np * sizeof(unsigned int)) >= 0) {
-		if (prev) {
-			if (prev[0] == ranges[0] && prev[1] == ranges[1] &&
-				(prev[2] + prev[na+4]) == ranges[2] &&
-				(prev[na+2] + prev[na+4]) == ranges[na+2]) {
-				prev[na+4] += ranges[na+4];
-				ranges[0] = 0;
-				ranges += np;
-				continue;
-			}
-		}
-		prev = ranges;
-		ranges += np;
-	}
-
-	/*
-	 * The ranges property is laid out as an array of elements,
-	 * each of which comprises:
-	 *   cells 0 - 2:	a PCI address
-	 *   cells 3 or 3+4:	a CPU physical address
-	 *			(size depending on dev->n_addr_cells)
-	 *   cells 4+5 or 5+6:	the size of the range
-	 */
-	ranges = lc_ranges;
-	rlen = orig_rlen;
-	while (ranges && (rlen -= np * sizeof(unsigned int)) >= 0) {
-		res = NULL;
-		size = ranges[na+4];
-		switch (ranges[0] >> 24) {
-		case 1:		/* I/O space */
-			if (ranges[2] != 0)
-				break;
-			hose->io_base_phys = ranges[na+2];
-			/* limit I/O space to 16MB */
-			if (size > 0x01000000)
-				size = 0x01000000;
-			hose->io_base_virt = ioremap(ranges[na+2], size);
-			if (primary)
-				isa_io_base = (unsigned long) hose->io_base_virt;
-			res = &hose->io_resource;
-			res->flags = IORESOURCE_IO;
-			res->start = ranges[2];
-			break;
-		case 2:		/* memory space */
-			memno = 0;
-			if (ranges[1] == 0 && ranges[2] == 0
-			    && ranges[na+4] <= (16 << 20)) {
-				/* 1st 16MB, i.e. ISA memory area */
-#if 0
-				if (primary)
-					isa_mem_base = ranges[na+2];
-#endif
-				memno = 1;
-			}
-			while (memno < 3 && hose->mem_resources[memno].flags)
-				++memno;
-			if (memno == 0)
-				hose->pci_mem_offset = ranges[na+2] - ranges[2];
-			if (memno < 3) {
-				res = &hose->mem_resources[memno];
-				res->flags = IORESOURCE_MEM;
-				res->start = ranges[na+2];
-			}
-			break;
-		}
-		if (res != NULL) {
-			res->name = dev->full_name;
-			res->end = res->start + size - 1;
-			res->parent = NULL;
-			res->sibling = NULL;
-			res->child = NULL;
-		}
-		ranges += np;
-	}
-}
-
-/*
- * We assume that if we have a G3 powermac, we have one bridge called
- * "pci" (a MPC106) and no bandit or chaos bridges, and contrariwise,
- * if we have one or more bandit or chaos bridges, we don't have a MPC106.
- */
-static int __init add_bridge(struct device_node *dev)
-{
-	int len;
-	struct pci_controller *hose;
-	char* disp_name;
-	int *bus_range;
-	int primary = 1;
-	struct property *of_prop;
-
-	DBG("Adding PCI host bridge %s\n", dev->full_name);
-
-	bus_range = (int *) get_property(dev, "bus-range", &len);
-	if (bus_range == NULL || len < 2 * sizeof(int)) {
-		printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n",
-			dev->full_name);
-	}
-
-	hose = alloc_bootmem(sizeof(struct pci_controller));
-	if (hose == NULL)
-		return -ENOMEM;
-	pci_setup_pci_controller(hose);
-
-	hose->arch_data = dev;
-	hose->first_busno = bus_range ? bus_range[0] : 0;
-	hose->last_busno = bus_range ? bus_range[1] : 0xff;
-
-	of_prop = alloc_bootmem(sizeof(struct property) +
-				sizeof(hose->global_number));
-	if (of_prop) {
-		memset(of_prop, 0, sizeof(struct property));
-		of_prop->name = "linux,pci-domain";
-		of_prop->length = sizeof(hose->global_number);
-		of_prop->value = (unsigned char *)&of_prop[1];
-		memcpy(of_prop->value, &hose->global_number, sizeof(hose->global_number));
-		prom_add_property(dev, of_prop);
-	}
-
-	disp_name = NULL;
-	if (device_is_compatible(dev, "u3-agp")) {
-		setup_u3_agp(hose);
-		disp_name = "U3-AGP";
-		primary = 0;
-	} else if (device_is_compatible(dev, "u3-ht")) {
-		setup_u3_ht(hose);
-		disp_name = "U3-HT";
-		primary = 1;
-	}
-	printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n",
-		disp_name, hose->first_busno, hose->last_busno);
-
-	/* Interpret the "ranges" property */
-	/* This also maps the I/O region and sets isa_io/mem_base */
-	pmac_process_bridge_OF_ranges(hose, dev, primary);
-
-	/* Fixup "bus-range" OF property */
-	fixup_bus_range(dev);
-
-	return 0;
-}
-
-/*
- * We use our own read_irq_line here because PCI_INTERRUPT_PIN is
- * crap on some of Apple ASICs. We unconditionally use the Open Firmware
- * interrupt number as this is always right.
- */
-static int pmac_pci_read_irq_line(struct pci_dev *pci_dev)
-{
-	struct device_node *node;
-
-	node = pci_device_to_OF_node(pci_dev);
-	if (node == NULL)
-		return -1;
-	if (node->n_intrs == 0)
-		return -1;
-	pci_dev->irq = node->intrs[0].line;
-	pci_write_config_byte(pci_dev, PCI_INTERRUPT_LINE, pci_dev->irq);
-
-	return 0;
-}
-
-void __init pmac_pcibios_fixup(void)
-{
-	struct pci_dev *dev = NULL;
-
-	for_each_pci_dev(dev)
-		pmac_pci_read_irq_line(dev);
-}
-
-static void __init pmac_fixup_phb_resources(void)
-{
-	struct pci_controller *hose, *tmp;
-	
-	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
-		unsigned long offset = (unsigned long)hose->io_base_virt - pci_io_base;
-		hose->io_resource.start += offset;
-		hose->io_resource.end += offset;
-		printk(KERN_INFO "PCI Host %d, io start: %lx; io end: %lx\n",
-		       hose->global_number,
-		       hose->io_resource.start, hose->io_resource.end);
-	}
-}
-
-void __init pmac_pci_init(void)
-{
-	struct device_node *np, *root;
-	struct device_node *ht = NULL;
-
-	/* Probe root PCI hosts, that is on U3 the AGP host and the
-	 * HyperTransport host. That one is actually "kept" around
-	 * and actually added last as it's resource management relies
-	 * on the AGP resources to have been setup first
-	 */
-	root = of_find_node_by_path("/");
-	if (root == NULL) {
-		printk(KERN_CRIT "pmac_find_bridges: can't find root of device tree\n");
-		return;
-	}
-	for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) {
-		if (np->name == NULL)
-			continue;
-		if (strcmp(np->name, "pci") == 0) {
-			if (add_bridge(np) == 0)
-				of_node_get(np);
-		}
-		if (strcmp(np->name, "ht") == 0) {
-			of_node_get(np);
-			ht = np;
-		}
-	}
-	of_node_put(root);
-
-	/* Now setup the HyperTransport host if we found any
-	 */
-	if (ht && add_bridge(ht) != 0)
-		of_node_put(ht);
-
-	/* Fixup the IO resources on our host bridges as the common code
-	 * does it only for childs of the host bridges
-	 */
-	pmac_fixup_phb_resources();
-
-	/* Setup the linkage between OF nodes and PHBs */ 
-	pci_devs_phb_init();
-
-	/* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
-	 * assume there is no P2P bridge on the AGP bus, which should be a
-	 * safe assumptions hopefully.
-	 */
-	if (u3_agp) {
-		struct device_node *np = u3_agp->arch_data;
-		PCI_DN(np)->busno = 0xf0;
-		for (np = np->child; np; np = np->sibling)
-			PCI_DN(np)->busno = 0xf0;
-	}
-
-	pmac_check_ht_link();
-
-	/* Tell pci.c to not use the common resource allocation mecanism */
-	pci_probe_only = 1;
-	
-	/* Allow all IO */
-	io_page_mask = -1;
-}
-
-/*
- * Disable second function on K2-SATA, it's broken
- * and disable IO BARs on first one
- */
-static void fixup_k2_sata(struct pci_dev* dev)
-{
-	int i;
-	u16 cmd;
-
-	if (PCI_FUNC(dev->devfn) > 0) {
-		pci_read_config_word(dev, PCI_COMMAND, &cmd);
-		cmd &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY);
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-		for (i = 0; i < 6; i++) {
-			dev->resource[i].start = dev->resource[i].end = 0;
-			dev->resource[i].flags = 0;
-			pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0);
-		}
-	} else {
-		pci_read_config_word(dev, PCI_COMMAND, &cmd);
-		cmd &= ~PCI_COMMAND_IO;
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-		for (i = 0; i < 5; i++) {
-			dev->resource[i].start = dev->resource[i].end = 0;
-			dev->resource[i].flags = 0;
-			pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0);
-		}
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, 0x0240, fixup_k2_sata);
-
diff --git a/arch/ppc64/kernel/pmac_setup.c b/arch/ppc64/kernel/pmac_setup.c
deleted file mode 100644
index 325426c7bed0..000000000000
--- a/arch/ppc64/kernel/pmac_setup.c
+++ /dev/null
@@ -1,516 +0,0 @@
-/*
- *  arch/ppc/platforms/setup.c
- *
- *  PowerPC version
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Adapted for Power Macintosh by Paul Mackerras
- *    Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au)
- *
- *  Derived from "arch/alpha/kernel/setup.c"
- *    Copyright (C) 1995 Linus Torvalds
- *
- *  Maintained by Benjamin Herrenschmidt (benh@kernel.crashing.org)
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-/*
- * bootup setup stuff..
- */
-
-#undef DEBUG
-
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
-#include <linux/tty.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/major.h>
-#include <linux/initrd.h>
-#include <linux/vt_kern.h>
-#include <linux/console.h>
-#include <linux/ide.h>
-#include <linux/pci.h>
-#include <linux/adb.h>
-#include <linux/cuda.h>
-#include <linux/pmu.h>
-#include <linux/irq.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/bitops.h>
-
-#include <asm/processor.h>
-#include <asm/sections.h>
-#include <asm/prom.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/pci-bridge.h>
-#include <asm/iommu.h>
-#include <asm/machdep.h>
-#include <asm/dma.h>
-#include <asm/btext.h>
-#include <asm/cputable.h>
-#include <asm/pmac_feature.h>
-#include <asm/time.h>
-#include <asm/of_device.h>
-#include <asm/lmb.h>
-#include <asm/smu.h>
-#include <asm/pmc.h>
-
-#include "pmac.h"
-#include "mpic.h"
-
-#ifdef DEBUG
-#define DBG(fmt...) udbg_printf(fmt)
-#else
-#define DBG(fmt...)
-#endif
-
-static int current_root_goodness = -1;
-#define DEFAULT_ROOT_DEVICE Root_SDA1	/* sda1 - slightly silly choice */
-
-extern  int powersave_nap;
-int sccdbg;
-
-sys_ctrler_t sys_ctrler;
-EXPORT_SYMBOL(sys_ctrler);
-
-#ifdef CONFIG_PMAC_SMU
-unsigned long smu_cmdbuf_abs;
-EXPORT_SYMBOL(smu_cmdbuf_abs);
-#endif
-
-extern void udbg_init_scc(struct device_node *np);
-
-static void __pmac pmac_show_cpuinfo(struct seq_file *m)
-{
-	struct device_node *np;
-	char *pp;
-	int plen;
-	char* mbname;
-	int mbmodel = pmac_call_feature(PMAC_FTR_GET_MB_INFO, NULL,
-					PMAC_MB_INFO_MODEL, 0);
-	unsigned int mbflags = pmac_call_feature(PMAC_FTR_GET_MB_INFO, NULL,
-						 PMAC_MB_INFO_FLAGS, 0);
-
-	if (pmac_call_feature(PMAC_FTR_GET_MB_INFO, NULL, PMAC_MB_INFO_NAME,
-			      (long)&mbname) != 0)
-		mbname = "Unknown";
-	
-	/* find motherboard type */
-	seq_printf(m, "machine\t\t: ");
-	np = find_devices("device-tree");
-	if (np != NULL) {
-		pp = (char *) get_property(np, "model", NULL);
-		if (pp != NULL)
-			seq_printf(m, "%s\n", pp);
-		else
-			seq_printf(m, "PowerMac\n");
-		pp = (char *) get_property(np, "compatible", &plen);
-		if (pp != NULL) {
-			seq_printf(m, "motherboard\t:");
-			while (plen > 0) {
-				int l = strlen(pp) + 1;
-				seq_printf(m, " %s", pp);
-				plen -= l;
-				pp += l;
-			}
-			seq_printf(m, "\n");
-		}
-	} else
-		seq_printf(m, "PowerMac\n");
-
-	/* print parsed model */
-	seq_printf(m, "detected as\t: %d (%s)\n", mbmodel, mbname);
-	seq_printf(m, "pmac flags\t: %08x\n", mbflags);
-
-	/* Indicate newworld */
-	seq_printf(m, "pmac-generation\t: NewWorld\n");
-}
-
-
-static void __init pmac_setup_arch(void)
-{
-	/* init to some ~sane value until calibrate_delay() runs */
-	loops_per_jiffy = 50000000;
-
-	/* Probe motherboard chipset */
-	pmac_feature_init();
-#if 0
-	/* Lock-enable the SCC channel used for debug */
-	if (sccdbg) {
-		np = of_find_node_by_name(NULL, "escc");
-		if (np)
-			pmac_call_feature(PMAC_FTR_SCC_ENABLE, np,
-					  PMAC_SCC_ASYNC | PMAC_SCC_FLAG_XMON, 1);
-	}
-#endif
-	/* We can NAP */
-	powersave_nap = 1;
-
-#ifdef CONFIG_ADB_PMU
-	/* Initialize the PMU if any */
-	find_via_pmu();
-#endif
-#ifdef CONFIG_PMAC_SMU
-	/* Initialize the SMU if any */
-	smu_init();
-#endif
-
-	/* Init NVRAM access */
-	pmac_nvram_init();
-
-	/* Setup SMP callback */
-#ifdef CONFIG_SMP
-	pmac_setup_smp();
-#endif
-
-	/* Lookup PCI hosts */
-       	pmac_pci_init();
-
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
-
-	printk(KERN_INFO "Using native/NAP idle loop\n");
-}
-
-#ifdef CONFIG_SCSI
-void note_scsi_host(struct device_node *node, void *host)
-{
-	/* Obsolete */
-}
-#endif
-
-
-static int initializing = 1;
-
-static int pmac_late_init(void)
-{
-	initializing = 0;
-	return 0;
-}
-
-late_initcall(pmac_late_init);
-
-/* can't be __init - can be called whenever a disk is first accessed */
-void __pmac note_bootable_part(dev_t dev, int part, int goodness)
-{
-	extern dev_t boot_dev;
-	char *p;
-
-	if (!initializing)
-		return;
-	if ((goodness <= current_root_goodness) &&
-	    ROOT_DEV != DEFAULT_ROOT_DEVICE)
-		return;
-	p = strstr(saved_command_line, "root=");
-	if (p != NULL && (p == saved_command_line || p[-1] == ' '))
-		return;
-
-	if (!boot_dev || dev == boot_dev) {
-		ROOT_DEV = dev + part;
-		boot_dev = 0;
-		current_root_goodness = goodness;
-	}
-}
-
-static void __pmac pmac_restart(char *cmd)
-{
-	switch(sys_ctrler) {
-#ifdef CONFIG_ADB_PMU
-	case SYS_CTRLER_PMU:
-		pmu_restart();
-		break;
-#endif
-
-#ifdef CONFIG_PMAC_SMU
-	case SYS_CTRLER_SMU:
-		smu_restart();
-		break;
-#endif
-	default:
-		;
-	}
-}
-
-static void __pmac pmac_power_off(void)
-{
-	switch(sys_ctrler) {
-#ifdef CONFIG_ADB_PMU
-	case SYS_CTRLER_PMU:
-		pmu_shutdown();
-		break;
-#endif
-#ifdef CONFIG_PMAC_SMU
-	case SYS_CTRLER_SMU:
-		smu_shutdown();
-		break;
-#endif
-	default:
-		;
-	}
-}
-
-static void __pmac pmac_halt(void)
-{
-	pmac_power_off();
-}
-
-#ifdef CONFIG_BOOTX_TEXT
-static void btext_putc(unsigned char c)
-{
-	btext_drawchar(c);
-}
-
-static void __init init_boot_display(void)
-{
-	char *name;
-	struct device_node *np = NULL; 
-	int rc = -ENODEV;
-
-	printk("trying to initialize btext ...\n");
-
-	name = (char *)get_property(of_chosen, "linux,stdout-path", NULL);
-	if (name != NULL) {
-		np = of_find_node_by_path(name);
-		if (np != NULL) {
-			if (strcmp(np->type, "display") != 0) {
-				printk("boot stdout isn't a display !\n");
-				of_node_put(np);
-				np = NULL;
-			}
-		}
-	}
-	if (np)
-		rc = btext_initialize(np);
-	if (rc == 0)
-		return;
-
-	for (np = NULL; (np = of_find_node_by_type(np, "display"));) {
-		if (get_property(np, "linux,opened", NULL)) {
-			printk("trying %s ...\n", np->full_name);
-			rc = btext_initialize(np);
-			printk("result: %d\n", rc);
-		}
-		if (rc == 0)
-			return;
-	}
-}
-#endif /* CONFIG_BOOTX_TEXT */
-
-/* 
- * Early initialization.
- */
-static void __init pmac_init_early(void)
-{
-	DBG(" -> pmac_init_early\n");
-
-	/* Initialize hash table, from now on, we can take hash faults
-	 * and call ioremap
-	 */
-	hpte_init_native();
-
-	/* Init SCC */
-       	if (strstr(cmd_line, "sccdbg")) {
-		sccdbg = 1;
-       		udbg_init_scc(NULL);
-       	}
-#ifdef CONFIG_BOOTX_TEXT
-	else {
-		init_boot_display();
-
-		udbg_putc = btext_putc;
-	}
-#endif /* CONFIG_BOOTX_TEXT */
-
-	/* Setup interrupt mapping options */
-	ppc64_interrupt_controller = IC_OPEN_PIC;
-
-	iommu_init_early_u3();
-
-	DBG(" <- pmac_init_early\n");
-}
-
-static int pmac_u3_cascade(struct pt_regs *regs, void *data)
-{
-	return mpic_get_one_irq((struct mpic *)data, regs);
-}
-
-static __init void pmac_init_IRQ(void)
-{
-        struct device_node *irqctrler  = NULL;
-        struct device_node *irqctrler2 = NULL;
-	struct device_node *np = NULL;
-	struct mpic *mpic1, *mpic2;
-
-	/* We first try to detect Apple's new Core99 chipset, since mac-io
-	 * is quite different on those machines and contains an IBM MPIC2.
-	 */
-	while ((np = of_find_node_by_type(np, "open-pic")) != NULL) {
-		struct device_node *parent = of_get_parent(np);
-		if (parent && !strcmp(parent->name, "u3"))
-			irqctrler2 = of_node_get(np);
-		else
-			irqctrler = of_node_get(np);
-		of_node_put(parent);
-	}
-	if (irqctrler != NULL && irqctrler->n_addrs > 0) {
-		unsigned char senses[128];
-
-		printk(KERN_INFO "PowerMac using OpenPIC irq controller at 0x%08x\n",
-		       (unsigned int)irqctrler->addrs[0].address);
-
-		prom_get_irq_senses(senses, 0, 128);
-		mpic1 = mpic_alloc(irqctrler->addrs[0].address,
-				   MPIC_PRIMARY | MPIC_WANTS_RESET,
-				   0, 0, 128, 256, senses, 128, " K2-MPIC  ");
-		BUG_ON(mpic1 == NULL);
-		mpic_init(mpic1);		
-
-		if (irqctrler2 != NULL && irqctrler2->n_intrs > 0 &&
-		    irqctrler2->n_addrs > 0) {
-			printk(KERN_INFO "Slave OpenPIC at 0x%08x hooked on IRQ %d\n",
-			       (u32)irqctrler2->addrs[0].address,
-			       irqctrler2->intrs[0].line);
-
-			pmac_call_feature(PMAC_FTR_ENABLE_MPIC, irqctrler2, 0, 0);
-			prom_get_irq_senses(senses, 128, 128 + 128);
-
-			/* We don't need to set MPIC_BROKEN_U3 here since we don't have
-			 * hypertransport interrupts routed to it
-			 */
-			mpic2 = mpic_alloc(irqctrler2->addrs[0].address,
-					   MPIC_BIG_ENDIAN | MPIC_WANTS_RESET,
-					   0, 128, 128, 0, senses, 128, " U3-MPIC  ");
-			BUG_ON(mpic2 == NULL);
-			mpic_init(mpic2);
-			mpic_setup_cascade(irqctrler2->intrs[0].line,
-					   pmac_u3_cascade, mpic2);
-		}
-	}
-	of_node_put(irqctrler);
-	of_node_put(irqctrler2);
-}
-
-static void __init pmac_progress(char *s, unsigned short hex)
-{
-	if (sccdbg) {
-		udbg_puts(s);
-		udbg_puts("\n");
-	}
-#ifdef CONFIG_BOOTX_TEXT
-	else if (boot_text_mapped) {
-		btext_drawstring(s);
-		btext_drawstring("\n");
-	}
-#endif /* CONFIG_BOOTX_TEXT */
-}
-
-/*
- * pmac has no legacy IO, anything calling this function has to
- * fail or bad things will happen
- */
-static int pmac_check_legacy_ioport(unsigned int baseport)
-{
-	return -ENODEV;
-}
-
-static int __init pmac_declare_of_platform_devices(void)
-{
-	struct device_node *np;
-
-	np = find_devices("u3");
-	if (np) {
-		for (np = np->child; np != NULL; np = np->sibling)
-			if (strncmp(np->name, "i2c", 3) == 0) {
-				of_platform_device_create(np, "u3-i2c");
-				break;
-			}
-	}
-
-	return 0;
-}
-
-device_initcall(pmac_declare_of_platform_devices);
-
-/*
- * Called very early, MMU is off, device-tree isn't unflattened
- */
-static int __init pmac_probe(int platform)
-{
-	if (platform != PLATFORM_POWERMAC)
-		return 0;
-	/*
-	 * On U3, the DART (iommu) must be allocated now since it
-	 * has an impact on htab_initialize (due to the large page it
-	 * occupies having to be broken up so the DART itself is not
-	 * part of the cacheable linar mapping
-	 */
-	alloc_u3_dart_table();
-
-#ifdef CONFIG_PMAC_SMU
-	/*
-	 * SMU based G5s need some memory below 2Gb, at least the current
-	 * driver needs that. We have to allocate it now. We allocate 4k
-	 * (1 small page) for now.
-	 */
-	smu_cmdbuf_abs = lmb_alloc_base(4096, 4096, 0x80000000UL);
-#endif /* CONFIG_PMAC_SMU */
-
-	return 1;
-}
-
-static int pmac_probe_mode(struct pci_bus *bus)
-{
-	struct device_node *node = bus->sysdata;
-
-	/* We need to use normal PCI probing for the AGP bus,
-	   since the device for the AGP bridge isn't in the tree. */
-	if (bus->self == NULL && device_is_compatible(node, "u3-agp"))
-		return PCI_PROBE_NORMAL;
-
-	return PCI_PROBE_DEVTREE;
-}
-
-struct machdep_calls __initdata pmac_md = {
-#ifdef CONFIG_HOTPLUG_CPU
-	.cpu_die		= generic_mach_cpu_die,
-#endif
-	.probe			= pmac_probe,
-	.setup_arch		= pmac_setup_arch,
-	.init_early		= pmac_init_early,
-       	.get_cpuinfo		= pmac_show_cpuinfo,
-	.init_IRQ		= pmac_init_IRQ,
-	.get_irq		= mpic_get_irq,
-	.pcibios_fixup		= pmac_pcibios_fixup,
-	.pci_probe_mode		= pmac_probe_mode,
-	.restart		= pmac_restart,
-	.power_off		= pmac_power_off,
-	.halt			= pmac_halt,
-       	.get_boot_time		= pmac_get_boot_time,
-       	.set_rtc_time		= pmac_set_rtc_time,
-       	.get_rtc_time		= pmac_get_rtc_time,
-      	.calibrate_decr		= pmac_calibrate_decr,
-	.feature_call		= pmac_do_feature_call,
-	.progress		= pmac_progress,
-	.check_legacy_ioport	= pmac_check_legacy_ioport,
-	.idle_loop		= native_idle,
-	.enable_pmcs		= power4_enable_pmcs,
-};
diff --git a/arch/ppc64/kernel/pmac_smp.c b/arch/ppc64/kernel/pmac_smp.c
deleted file mode 100644
index a23de37227bf..000000000000
--- a/arch/ppc64/kernel/pmac_smp.c
+++ /dev/null
@@ -1,330 +0,0 @@
-/*
- * SMP support for power macintosh.
- *
- * We support both the old "powersurge" SMP architecture
- * and the current Core99 (G4 PowerMac) machines.
- *
- * Note that we don't support the very first rev. of
- * Apple/DayStar 2 CPUs board, the one with the funky
- * watchdog. Hopefully, none of these should be there except
- * maybe internally to Apple. I should probably still add some
- * code to detect this card though and disable SMP. --BenH.
- *
- * Support Macintosh G4 SMP by Troy Benjegerdes (hozer@drgw.net)
- * and Ben Herrenschmidt <benh@kernel.crashing.org>.
- *
- * Support for DayStar quad CPU cards
- * Copyright (C) XLR8, Inc. 1994-2000
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-
-#undef DEBUG
-
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/errno.h>
-#include <linux/irq.h>
-
-#include <asm/ptrace.h>
-#include <asm/atomic.h>
-#include <asm/irq.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/sections.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/smp.h>
-#include <asm/machdep.h>
-#include <asm/pmac_feature.h>
-#include <asm/time.h>
-#include <asm/cacheflush.h>
-#include <asm/keylargo.h>
-#include <asm/pmac_low_i2c.h>
-
-#include "mpic.h"
-
-#ifdef DEBUG
-#define DBG(fmt...) udbg_printf(fmt)
-#else
-#define DBG(fmt...)
-#endif
-
-extern void pmac_secondary_start_1(void);
-extern void pmac_secondary_start_2(void);
-extern void pmac_secondary_start_3(void);
-
-extern struct smp_ops_t *smp_ops;
-
-static void (*pmac_tb_freeze)(int freeze);
-static struct device_node *pmac_tb_clock_chip_host;
-static u8 pmac_tb_pulsar_addr;
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned long timebase;
-
-static void smp_core99_cypress_tb_freeze(int freeze)
-{
-	u8 data;
-	int rc;
-
-	/* Strangely, the device-tree says address is 0xd2, but darwin
-	 * accesses 0xd0 ...
-	 */
-	pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_combined);
-	rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
-			       0xd0 | pmac_low_i2c_read,
-			       0x81, &data, 1);
-	if (rc != 0)
-		goto bail;
-
-	data = (data & 0xf3) | (freeze ? 0x00 : 0x0c);
-
-       	pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_stdsub);
-	rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
-			       0xd0 | pmac_low_i2c_write,
-			       0x81, &data, 1);
-
- bail:
-	if (rc != 0) {
-		printk("Cypress Timebase %s rc: %d\n",
-		       freeze ? "freeze" : "unfreeze", rc);
-		panic("Timebase freeze failed !\n");
-	}
-}
-
-static void smp_core99_pulsar_tb_freeze(int freeze)
-{
-	u8 data;
-	int rc;
-
-	pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_combined);
-	rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
-			       pmac_tb_pulsar_addr | pmac_low_i2c_read,
-			       0x2e, &data, 1);
-	if (rc != 0)
-		goto bail;
-
-	data = (data & 0x88) | (freeze ? 0x11 : 0x22);
-
-	pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_stdsub);
-	rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
-			       pmac_tb_pulsar_addr | pmac_low_i2c_write,
-			       0x2e, &data, 1);
- bail:
-	if (rc != 0) {
-		printk(KERN_ERR "Pulsar Timebase %s rc: %d\n",
-		       freeze ? "freeze" : "unfreeze", rc);
-		panic("Timebase freeze failed !\n");
-	}
-}
-
-
-static void smp_core99_give_timebase(void)
-{
-	/* Open i2c bus for synchronous access */
-	if (pmac_low_i2c_open(pmac_tb_clock_chip_host, 0))
-		panic("Can't open i2c for TB sync !\n");
-
-	spin_lock(&timebase_lock);
-	(*pmac_tb_freeze)(1);
-	mb();
-	timebase = get_tb();
-	spin_unlock(&timebase_lock);
-
-	while (timebase)
-		barrier();
-
-	spin_lock(&timebase_lock);
-	(*pmac_tb_freeze)(0);
-	spin_unlock(&timebase_lock);
-
-	/* Close i2c bus */
-	pmac_low_i2c_close(pmac_tb_clock_chip_host);
-}
-
-
-static void __devinit smp_core99_take_timebase(void)
-{
-	while (!timebase)
-		barrier();
-	spin_lock(&timebase_lock);
-	set_tb(timebase >> 32, timebase & 0xffffffff);
-	timebase = 0;
-	spin_unlock(&timebase_lock);
-}
-
-
-static int __init smp_core99_probe(void)
-{
-	struct device_node *cpus;	
-	struct device_node *cc;	
-	int ncpus = 0;
-
-	/* Maybe use systemconfiguration here ? */
-	if (ppc_md.progress) ppc_md.progress("smp_core99_probe", 0x345);
-
-	/* Count CPUs in the device-tree */
-       	for (cpus = NULL; (cpus = of_find_node_by_type(cpus, "cpu")) != NULL;)
-	       	++ncpus;
-
-	printk(KERN_INFO "PowerMac SMP probe found %d cpus\n", ncpus);
-
-	/* Nothing more to do if less than 2 of them */
-	if (ncpus <= 1)
-		return 1;
-
-	/* HW sync only on these platforms */
-	if (!machine_is_compatible("PowerMac7,2") &&
-	    !machine_is_compatible("PowerMac7,3") &&
-	    !machine_is_compatible("RackMac3,1"))
-		goto nohwsync;
-
-	/* Look for the clock chip */
-	for (cc = NULL; (cc = of_find_node_by_name(cc, "i2c-hwclock")) != NULL;) {
-		struct device_node *p = of_get_parent(cc);
-		u32 *reg;
-		int ok;
-		ok = p && device_is_compatible(p, "uni-n-i2c");
-		if (!ok)
-			goto next;
-		reg = (u32 *)get_property(cc, "reg", NULL);
-		if (reg == NULL)
-			goto next;
-		switch (*reg) {
-		case 0xd2:
-			if (device_is_compatible(cc, "pulsar-legacy-slewing")) {
-				pmac_tb_freeze = smp_core99_pulsar_tb_freeze;
-				pmac_tb_pulsar_addr = 0xd2;
-				printk(KERN_INFO "Timebase clock is Pulsar chip\n");
-			} else if (device_is_compatible(cc, "cy28508")) {
-				pmac_tb_freeze = smp_core99_cypress_tb_freeze;
-				printk(KERN_INFO "Timebase clock is Cypress chip\n");
-			}
-			break;
-		case 0xd4:
-			pmac_tb_freeze = smp_core99_pulsar_tb_freeze;
-			pmac_tb_pulsar_addr = 0xd4;
-			printk(KERN_INFO "Timebase clock is Pulsar chip\n");
-			break;
-		}
-		if (pmac_tb_freeze != NULL) {
-			pmac_tb_clock_chip_host = p;
-			smp_ops->give_timebase = smp_core99_give_timebase;
-			smp_ops->take_timebase = smp_core99_take_timebase;
-			of_node_put(cc);
-			of_node_put(p);
-			break;
-		}
-	next:
-		of_node_put(p);
-	}
-
- nohwsync:
-	mpic_request_ipis();
-
-	return ncpus;
-}
-
-static void __init smp_core99_kick_cpu(int nr)
-{
-	int save_vector, j;
-	unsigned long new_vector;
-	unsigned long flags;
-	volatile unsigned int *vector
-		 = ((volatile unsigned int *)(KERNELBASE+0x100));
-
-	if (nr < 1 || nr > 3)
-		return;
-	if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu", 0x346);
-
-	local_irq_save(flags);
-	local_irq_disable();
-
-	/* Save reset vector */
-	save_vector = *vector;
-
-	/* Setup fake reset vector that does	
-	 *   b .pmac_secondary_start - KERNELBASE
-	 */
-	switch(nr) {
-	case 1:
-		new_vector = (unsigned long)pmac_secondary_start_1;
-		break;
-	case 2:
-		new_vector = (unsigned long)pmac_secondary_start_2;
-		break;			
-	case 3:
-	default:
-		new_vector = (unsigned long)pmac_secondary_start_3;
-		break;
-	}
-	*vector = 0x48000002 + (new_vector - KERNELBASE);
-
-	/* flush data cache and inval instruction cache */
-	flush_icache_range((unsigned long) vector, (unsigned long) vector + 4);
-
-	/* Put some life in our friend */
-	pmac_call_feature(PMAC_FTR_RESET_CPU, NULL, nr, 0);
-	paca[nr].cpu_start = 1;
-
-	/* FIXME: We wait a bit for the CPU to take the exception, I should
-	 * instead wait for the entry code to set something for me. Well,
-	 * ideally, all that crap will be done in prom.c and the CPU left
-	 * in a RAM-based wait loop like CHRP.
-	 */
-	for (j = 1; j < 1000000; j++)
-		mb();
-
-	/* Restore our exception vector */
-	*vector = save_vector;
-	flush_icache_range((unsigned long) vector, (unsigned long) vector + 4);
-
-	local_irq_restore(flags);
-	if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu done", 0x347);
-}
-
-static void __init smp_core99_setup_cpu(int cpu_nr)
-{
-	/* Setup MPIC */
-	mpic_setup_this_cpu();
-
-	if (cpu_nr == 0) {
-		extern void g5_phy_disable_cpu1(void);
-
-		/* If we didn't start the second CPU, we must take
-		 * it off the bus
-		 */
-		if (num_online_cpus() < 2)		
-			g5_phy_disable_cpu1();
-		if (ppc_md.progress) ppc_md.progress("smp_core99_setup_cpu 0 done", 0x349);
-	}
-}
-
-struct smp_ops_t core99_smp_ops __pmacdata = {
-	.message_pass	= smp_mpic_message_pass,
-	.probe		= smp_core99_probe,
-	.kick_cpu	= smp_core99_kick_cpu,
-	.setup_cpu	= smp_core99_setup_cpu,
-	.give_timebase	= smp_generic_give_timebase,
-	.take_timebase	= smp_generic_take_timebase,
-};
-
-void __init pmac_setup_smp(void)
-{
-	smp_ops = &core99_smp_ops;
-#ifdef CONFIG_HOTPLUG_CPU
-	smp_ops->cpu_enable = generic_cpu_enable;
-	smp_ops->cpu_disable = generic_cpu_disable;
-	smp_ops->cpu_die = generic_cpu_die;
-#endif
-}
diff --git a/arch/ppc64/kernel/pmac_time.c b/arch/ppc64/kernel/pmac_time.c
deleted file mode 100644
index 3059edb09cc8..000000000000
--- a/arch/ppc64/kernel/pmac_time.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * Support for periodic interrupts (100 per second) and for getting
- * the current time from the RTC on Power Macintoshes.
- *
- * We use the decrementer register for our periodic interrupts.
- *
- * Paul Mackerras	August 1996.
- * Copyright (C) 1996 Paul Mackerras.
- * Copyright (C) 2003-2005 Benjamin Herrenschmidt.
- *
- */
-#include <linux/config.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/time.h>
-#include <linux/adb.h>
-#include <linux/pmu.h>
-#include <linux/interrupt.h>
-
-#include <asm/sections.h>
-#include <asm/prom.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/machdep.h>
-#include <asm/time.h>
-#include <asm/nvram.h>
-#include <asm/smu.h>
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-/* Apparently the RTC stores seconds since 1 Jan 1904 */
-#define RTC_OFFSET	2082844800
-
-/*
- * Calibrate the decrementer frequency with the VIA timer 1.
- */
-#define VIA_TIMER_FREQ_6	4700000	/* time 1 frequency * 6 */
-
-extern struct timezone sys_tz;
-extern void to_tm(int tim, struct rtc_time * tm);
-
-void __pmac pmac_get_rtc_time(struct rtc_time *tm)
-{
-	switch(sys_ctrler) {
-#ifdef CONFIG_ADB_PMU
-	case SYS_CTRLER_PMU: {
-		/* TODO: Move that to a function in the PMU driver */
-		struct adb_request req;
-		unsigned int now;
-
-		if (pmu_request(&req, NULL, 1, PMU_READ_RTC) < 0)
-			return;
-		pmu_wait_complete(&req);
-		if (req.reply_len != 4)
-			printk(KERN_ERR "pmac_get_rtc_time: PMU returned a %d"
-			       " bytes reply\n", req.reply_len);
-		now = (req.reply[0] << 24) + (req.reply[1] << 16)
-			+ (req.reply[2] << 8) + req.reply[3];
-		DBG("get: %u -> %u\n", (int)now, (int)(now - RTC_OFFSET));
-		now -= RTC_OFFSET;
-
-		to_tm(now, tm);
-		tm->tm_year -= 1900;
-		tm->tm_mon -= 1;
-	
-		DBG("-> tm_mday: %d, tm_mon: %d, tm_year: %d, %d:%02d:%02d\n",
-		    tm->tm_mday, tm->tm_mon, tm->tm_year,
-		    tm->tm_hour, tm->tm_min, tm->tm_sec);
-		break;
-	}
-#endif /* CONFIG_ADB_PMU */
-
-#ifdef CONFIG_PMAC_SMU
-	case SYS_CTRLER_SMU:
-		smu_get_rtc_time(tm);
-		break;
-#endif /* CONFIG_PMAC_SMU */
-	default:
-		;
-	}
-}
-
-int __pmac pmac_set_rtc_time(struct rtc_time *tm)
-{
-	switch(sys_ctrler) {
-#ifdef CONFIG_ADB_PMU
-	case SYS_CTRLER_PMU: {
-		/* TODO: Move that to a function in the PMU driver */
-		struct adb_request req;
-		unsigned int nowtime;
-
-		DBG("set: tm_mday: %d, tm_mon: %d, tm_year: %d,"
-		    " %d:%02d:%02d\n",
-		    tm->tm_mday, tm->tm_mon, tm->tm_year,
-		    tm->tm_hour, tm->tm_min, tm->tm_sec);
-
-		nowtime = mktime(tm->tm_year + 1900, tm->tm_mon + 1,
-				 tm->tm_mday, tm->tm_hour, tm->tm_min,
-				 tm->tm_sec);
-
-		DBG("-> %u -> %u\n", (int)nowtime,
-		    (int)(nowtime + RTC_OFFSET));
-		nowtime += RTC_OFFSET;
-
-		if (pmu_request(&req, NULL, 5, PMU_SET_RTC,
-				nowtime >> 24, nowtime >> 16,
-				nowtime >> 8, nowtime) < 0)
-			return -ENXIO;
-		pmu_wait_complete(&req);
-		if (req.reply_len != 0)
-			printk(KERN_ERR "pmac_set_rtc_time: PMU returned a %d"
-			       " bytes reply\n", req.reply_len);
-		return 0;
-	}
-#endif /* CONFIG_ADB_PMU */
-
-#ifdef CONFIG_PMAC_SMU
-	case SYS_CTRLER_SMU:
-		return smu_set_rtc_time(tm);
-#endif /* CONFIG_PMAC_SMU */
-	default:
-		return -ENODEV;
-	}
-}
-
-void __init pmac_get_boot_time(struct rtc_time *tm)
-{
-	pmac_get_rtc_time(tm);
-
-#ifdef disabled__CONFIG_NVRAM
-	s32 delta = 0;
-	int dst;
-	
-	delta = ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x9)) << 16;
-	delta |= ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0xa)) << 8;
-	delta |= pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0xb);
-	if (delta & 0x00800000UL)
-		delta |= 0xFF000000UL;
-	dst = ((pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x8) & 0x80) != 0);
-	printk("GMT Delta read from XPRAM: %d minutes, DST: %s\n", delta/60,
-		dst ? "on" : "off");
-#endif
-}
-
-/*
- * Query the OF and get the decr frequency.
- * FIXME: merge this with generic_calibrate_decr
- */
-void __init pmac_calibrate_decr(void)
-{
-	struct device_node *cpu;
-	unsigned int freq, *fp;
-	struct div_result divres;
-
-	/*
-	 * The cpu node should have a timebase-frequency property
-	 * to tell us the rate at which the decrementer counts.
-	 */
-	cpu = find_type_devices("cpu");
-	if (cpu == 0)
-		panic("can't find cpu node in time_init");
-	fp = (unsigned int *) get_property(cpu, "timebase-frequency", NULL);
-	if (fp == 0)
-		panic("can't get cpu timebase frequency");
-	freq = *fp;
-	printk("time_init: decrementer frequency = %u.%.6u MHz\n",
-	       freq/1000000, freq%1000000);
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_ticks_per_sec = tb_ticks_per_jiffy * HZ;
-	tb_ticks_per_usec = freq / 1000000;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-	div128_by_32( 1024*1024, 0, tb_ticks_per_sec, &divres );
-	tb_to_xs = divres.result_low;
-	ppc_tb_freq = freq;
-
-	fp = (unsigned int *)get_property(cpu, "clock-frequency", NULL);
-	if (fp == 0)
-		panic("can't get cpu processor frequency");
-	ppc_proc_freq = *fp;
-
-	setup_default_decr();
-}
-
diff --git a/arch/ppc64/kernel/ppc_ksyms.c b/arch/ppc64/kernel/ppc_ksyms.c
deleted file mode 100644
index 705742f4eec6..000000000000
--- a/arch/ppc64/kernel/ppc_ksyms.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/* 
- * c 2001 PPC 64 Team, IBM Corp
- *
- *      This program is free software; you can redistribute it and/or
- *      modify it under the terms of the GNU General Public License
- *      as published by the Free Software Foundation; either version
- *      2 of the License, or (at your option) any later version.
- */
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/console.h>
-#include <net/checksum.h>
-
-#include <asm/processor.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/hw_irq.h>
-#include <asm/abs_addr.h>
-#include <asm/cacheflush.h>
-#include <asm/iSeries/HvCallSc.h>
-
-EXPORT_SYMBOL(strcpy);
-EXPORT_SYMBOL(strncpy);
-EXPORT_SYMBOL(strcat);
-EXPORT_SYMBOL(strncat);
-EXPORT_SYMBOL(strchr);
-EXPORT_SYMBOL(strrchr);
-EXPORT_SYMBOL(strpbrk);
-EXPORT_SYMBOL(strstr);
-EXPORT_SYMBOL(strlen);
-EXPORT_SYMBOL(strnlen);
-EXPORT_SYMBOL(strcmp);
-EXPORT_SYMBOL(strncmp);
-
-EXPORT_SYMBOL(csum_partial);
-EXPORT_SYMBOL(csum_partial_copy_generic);
-EXPORT_SYMBOL(ip_fast_csum);
-EXPORT_SYMBOL(csum_tcpudp_magic);
-
-EXPORT_SYMBOL(__copy_tofrom_user);
-EXPORT_SYMBOL(__clear_user);
-EXPORT_SYMBOL(__strncpy_from_user);
-EXPORT_SYMBOL(__strnlen_user);
-
-EXPORT_SYMBOL(reloc_offset);
-
-#ifdef CONFIG_PPC_ISERIES
-EXPORT_SYMBOL(HvCall0);
-EXPORT_SYMBOL(HvCall1);
-EXPORT_SYMBOL(HvCall2);
-EXPORT_SYMBOL(HvCall3);
-EXPORT_SYMBOL(HvCall4);
-EXPORT_SYMBOL(HvCall5);
-EXPORT_SYMBOL(HvCall6);
-EXPORT_SYMBOL(HvCall7);
-#endif
-
-EXPORT_SYMBOL(_insb);
-EXPORT_SYMBOL(_outsb);
-EXPORT_SYMBOL(_insw);
-EXPORT_SYMBOL(_outsw);
-EXPORT_SYMBOL(_insl);
-EXPORT_SYMBOL(_outsl);
-EXPORT_SYMBOL(_insw_ns);
-EXPORT_SYMBOL(_outsw_ns);
-EXPORT_SYMBOL(_insl_ns);
-EXPORT_SYMBOL(_outsl_ns);
-
-EXPORT_SYMBOL(kernel_thread);
-
-EXPORT_SYMBOL(giveup_fpu);
-#ifdef CONFIG_ALTIVEC
-EXPORT_SYMBOL(giveup_altivec);
-#endif
-EXPORT_SYMBOL(__flush_icache_range);
-EXPORT_SYMBOL(flush_dcache_range);
-
-#ifdef CONFIG_SMP
-#ifdef CONFIG_PPC_ISERIES
-EXPORT_SYMBOL(local_get_flags);
-EXPORT_SYMBOL(local_irq_disable);
-EXPORT_SYMBOL(local_irq_restore);
-#endif
-#endif
-
-EXPORT_SYMBOL(memcpy);
-EXPORT_SYMBOL(memset);
-EXPORT_SYMBOL(memmove);
-EXPORT_SYMBOL(memscan);
-EXPORT_SYMBOL(memcmp);
-EXPORT_SYMBOL(memchr);
-
-EXPORT_SYMBOL(timer_interrupt);
-EXPORT_SYMBOL(console_drivers);
diff --git a/arch/ppc64/kernel/ptrace.c b/arch/ppc64/kernel/ptrace.c
deleted file mode 100644
index 85ed3188a91d..000000000000
--- a/arch/ppc64/kernel/ptrace.c
+++ /dev/null
@@ -1,362 +0,0 @@
-/*
- *  linux/arch/ppc64/kernel/ptrace.c
- *
- *  PowerPC version
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Derived from "arch/m68k/kernel/ptrace.c"
- *  Copyright (C) 1994 by Hamish Macdonald
- *  Taken from linux/kernel/ptrace.c and modified for M680x0.
- *  linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
- *
- * Modified by Cort Dougan (cort@hq.fsmlabs.com)
- * and Paul Mackerras (paulus@linuxcare.com.au).
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file README.legal in the main directory of
- * this archive for more details.
- */
-
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/errno.h>
-#include <linux/ptrace.h>
-#include <linux/user.h>
-#include <linux/security.h>
-#include <linux/audit.h>
-#include <linux/seccomp.h>
-#include <linux/signal.h>
-
-#include <asm/uaccess.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/system.h>
-#include <asm/ptrace-common.h>
-
-/*
- * does not yet catch signals sent when the child dies.
- * in exit.c or in signal.c.
- */
-
-/*
- * Called by kernel/ptrace.c when detaching..
- *
- * Make sure single step bits etc are not set.
- */
-void ptrace_disable(struct task_struct *child)
-{
-	/* make sure the single step bit is not set. */
-	clear_single_step(child);
-}
-
-int sys_ptrace(long request, long pid, long addr, long data)
-{
-	struct task_struct *child;
-	int ret = -EPERM;
-
-	lock_kernel();
-	if (request == PTRACE_TRACEME) {
-		/* are we already being traced? */
-		if (current->ptrace & PT_PTRACED)
-			goto out;
-		ret = security_ptrace(current->parent, current);
-		if (ret)
-			goto out;
-		/* set the ptrace bit in the process flags. */
-		current->ptrace |= PT_PTRACED;
-		ret = 0;
-		goto out;
-	}
-	ret = -ESRCH;
-	read_lock(&tasklist_lock);
-	child = find_task_by_pid(pid);
-	if (child)
-		get_task_struct(child);
-	read_unlock(&tasklist_lock);
-	if (!child)
-		goto out;
-
-	ret = -EPERM;
-	if (pid == 1)		/* you may not mess with init */
-		goto out_tsk;
-
-	if (request == PTRACE_ATTACH) {
-		ret = ptrace_attach(child);
-		goto out_tsk;
-	}
-
-	ret = ptrace_check_attach(child, request == PTRACE_KILL);
-	if (ret < 0)
-		goto out_tsk;
-
-	switch (request) {
-	/* when I and D space are separate, these will need to be fixed. */
-	case PTRACE_PEEKTEXT: /* read word at location addr. */ 
-	case PTRACE_PEEKDATA: {
-		unsigned long tmp;
-		int copied;
-
-		copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
-		ret = -EIO;
-		if (copied != sizeof(tmp))
-			break;
-		ret = put_user(tmp,(unsigned long __user *) data);
-		break;
-	}
-
-	/* read the word at location addr in the USER area. */
-	case PTRACE_PEEKUSR: {
-		unsigned long index;
-		unsigned long tmp;
-
-		ret = -EIO;
-		/* convert to index and check */
-		index = (unsigned long) addr >> 3;
-		if ((addr & 7) || (index > PT_FPSCR))
-			break;
-
-		if (index < PT_FPR0) {
-			tmp = get_reg(child, (int)index);
-		} else {
-			flush_fp_to_thread(child);
-			tmp = ((unsigned long *)child->thread.fpr)[index - PT_FPR0];
-		}
-		ret = put_user(tmp,(unsigned long __user *) data);
-		break;
-	}
-
-	/* If I and D space are separate, this will have to be fixed. */
-	case PTRACE_POKETEXT: /* write the word at location addr. */
-	case PTRACE_POKEDATA:
-		ret = 0;
-		if (access_process_vm(child, addr, &data, sizeof(data), 1)
-				== sizeof(data))
-			break;
-		ret = -EIO;
-		break;
-
-	/* write the word at location addr in the USER area */
-	case PTRACE_POKEUSR: {
-		unsigned long index;
-
-		ret = -EIO;
-		/* convert to index and check */
-		index = (unsigned long) addr >> 3;
-		if ((addr & 7) || (index > PT_FPSCR))
-			break;
-
-		if (index == PT_ORIG_R3)
-			break;
-		if (index < PT_FPR0) {
-			ret = put_reg(child, index, data);
-		} else {
-			flush_fp_to_thread(child);
-			((unsigned long *)child->thread.fpr)[index - PT_FPR0] = data;
-			ret = 0;
-		}
-		break;
-	}
-
-	case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
-	case PTRACE_CONT: { /* restart after signal. */
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
-		/* make sure the single step bit is not set. */
-		clear_single_step(child);
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
-	/*
-	 * make the child exit.  Best I can do is send it a sigkill.
-	 * perhaps it should be put in the status that it wants to
-	 * exit.
-	 */
-	case PTRACE_KILL: {
-		ret = 0;
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-		child->exit_code = SIGKILL;
-		/* make sure the single step bit is not set. */
-		clear_single_step(child);
-		wake_up_process(child);
-		break;
-	}
-
-	case PTRACE_SINGLESTEP: {  /* set the trap flag. */
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		set_single_step(child);
-		child->exit_code = data;
-		/* give it a chance to run. */
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
-	case PTRACE_GET_DEBUGREG: {
-		ret = -EINVAL;
-		/* We only support one DABR and no IABRS at the moment */
-		if (addr > 0)
-			break;
-		ret = put_user(child->thread.dabr,
-			       (unsigned long __user *)data);
-		break;
-	}
-
-	case PTRACE_SET_DEBUGREG:
-		ret = ptrace_set_debugreg(child, addr, data);
-
-	case PTRACE_DETACH:
-		ret = ptrace_detach(child, data);
-		break;
-
-	case PPC_PTRACE_GETREGS: { /* Get GPRs 0 - 31. */
-		int i;
-		unsigned long *reg = &((unsigned long *)child->thread.regs)[0];
-		unsigned long __user *tmp = (unsigned long __user *)addr;
-
-		for (i = 0; i < 32; i++) {
-			ret = put_user(*reg, tmp);
-			if (ret)
-				break;
-			reg++;
-			tmp++;
-		}
-		break;
-	}
-
-	case PPC_PTRACE_SETREGS: { /* Set GPRs 0 - 31. */
-		int i;
-		unsigned long *reg = &((unsigned long *)child->thread.regs)[0];
-		unsigned long __user *tmp = (unsigned long __user *)addr;
-
-		for (i = 0; i < 32; i++) {
-			ret = get_user(*reg, tmp);
-			if (ret)
-				break;
-			reg++;
-			tmp++;
-		}
-		break;
-	}
-
-	case PPC_PTRACE_GETFPREGS: { /* Get FPRs 0 - 31. */
-		int i;
-		unsigned long *reg = &((unsigned long *)child->thread.fpr)[0];
-		unsigned long __user *tmp = (unsigned long __user *)addr;
-
-		flush_fp_to_thread(child);
-
-		for (i = 0; i < 32; i++) {
-			ret = put_user(*reg, tmp);
-			if (ret)
-				break;
-			reg++;
-			tmp++;
-		}
-		break;
-	}
-
-	case PPC_PTRACE_SETFPREGS: { /* Get FPRs 0 - 31. */
-		int i;
-		unsigned long *reg = &((unsigned long *)child->thread.fpr)[0];
-		unsigned long __user *tmp = (unsigned long __user *)addr;
-
-		flush_fp_to_thread(child);
-
-		for (i = 0; i < 32; i++) {
-			ret = get_user(*reg, tmp);
-			if (ret)
-				break;
-			reg++;
-			tmp++;
-		}
-		break;
-	}
-
-#ifdef CONFIG_ALTIVEC
-	case PTRACE_GETVRREGS:
-		/* Get the child altivec register state. */
-		flush_altivec_to_thread(child);
-		ret = get_vrregs((unsigned long __user *)data, child);
-		break;
-
-	case PTRACE_SETVRREGS:
-		/* Set the child altivec register state. */
-		flush_altivec_to_thread(child);
-		ret = set_vrregs(child, (unsigned long __user *)data);
-		break;
-#endif
-
-	default:
-		ret = ptrace_request(child, request, addr, data);
-		break;
-	}
-out_tsk:
-	put_task_struct(child);
-out:
-	unlock_kernel();
-	return ret;
-}
-
-static void do_syscall_trace(void)
-{
-	/* the 0x80 provides a way for the tracing parent to distinguish
-	   between a syscall stop and SIGTRAP delivery */
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				 ? 0x80 : 0));
-
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
-}
-
-void do_syscall_trace_enter(struct pt_regs *regs)
-{
-	secure_computing(regs->gpr[0]);
-
-	if (test_thread_flag(TIF_SYSCALL_TRACE)
-	    && (current->ptrace & PT_PTRACED))
-		do_syscall_trace();
-
-	if (unlikely(current->audit_context))
-		audit_syscall_entry(current,
-				    test_thread_flag(TIF_32BIT)?AUDIT_ARCH_PPC:AUDIT_ARCH_PPC64,
-				    regs->gpr[0],
-				    regs->gpr[3], regs->gpr[4],
-				    regs->gpr[5], regs->gpr[6]);
-
-}
-
-void do_syscall_trace_leave(struct pt_regs *regs)
-{
-	if (unlikely(current->audit_context))
-		audit_syscall_exit(current, 
-				   (regs->ccr&0x1000)?AUDITSC_FAILURE:AUDITSC_SUCCESS,
-				   regs->result);
-
-	if ((test_thread_flag(TIF_SYSCALL_TRACE)
-	     || test_thread_flag(TIF_SINGLESTEP))
-	    && (current->ptrace & PT_PTRACED))
-		do_syscall_trace();
-}
diff --git a/arch/ppc64/kernel/rtc.c b/arch/ppc64/kernel/rtc.c
deleted file mode 100644
index 6ff52bc61325..000000000000
--- a/arch/ppc64/kernel/rtc.c
+++ /dev/null
@@ -1,400 +0,0 @@
-/*
- *	Real Time Clock interface for PPC64.
- *
- *	Based on rtc.c by Paul Gortmaker
- *
- *	This driver allows use of the real time clock
- *	from user space. It exports the /dev/rtc
- *	interface supporting various ioctl() and also the
- *	/proc/driver/rtc pseudo-file for status information.
- *
- * 	Interface does not support RTC interrupts nor an alarm.
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License
- *	as published by the Free Software Foundation; either version
- *	2 of the License, or (at your option) any later version.
- *
- *      1.0	Mike Corrigan:    IBM iSeries rtc support
- *      1.1	Dave Engebretsen: IBM pSeries rtc support
- */
-
-#define RTC_VERSION		"1.1"
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/miscdevice.h>
-#include <linux/ioport.h>
-#include <linux/fcntl.h>
-#include <linux/mc146818rtc.h>
-#include <linux/init.h>
-#include <linux/poll.h>
-#include <linux/proc_fs.h>
-#include <linux/spinlock.h>
-#include <linux/bcd.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/time.h>
-#include <asm/rtas.h>
-
-#include <asm/iSeries/mf.h>
-#include <asm/machdep.h>
-
-extern int piranha_simulator;
-
-/*
- *	We sponge a minor off of the misc major. No need slurping
- *	up another valuable major dev number for this. If you add
- *	an ioctl, make sure you don't conflict with SPARC's RTC
- *	ioctls.
- */
-
-static ssize_t rtc_read(struct file *file, char __user *buf,
-			size_t count, loff_t *ppos);
-
-static int rtc_ioctl(struct inode *inode, struct file *file,
-		     unsigned int cmd, unsigned long arg);
-
-static int rtc_read_proc(char *page, char **start, off_t off,
-                         int count, int *eof, void *data);
-
-/*
- *	If this driver ever becomes modularised, it will be really nice
- *	to make the epoch retain its value across module reload...
- */
-
-static unsigned long epoch = 1900;	/* year corresponding to 0x00	*/
-
-static const unsigned char days_in_mo[] = 
-{0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
-
-/*
- *	Now all the various file operations that we export.
- */
-
-static ssize_t rtc_read(struct file *file, char __user *buf,
-			size_t count, loff_t *ppos)
-{
-	return -EIO;
-}
-
-static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-		     unsigned long arg)
-{
-	struct rtc_time wtime; 
-
-	switch (cmd) {
-	case RTC_RD_TIME:	/* Read the time/date from RTC	*/
-	{
-		memset(&wtime, 0, sizeof(struct rtc_time));
-		ppc_md.get_rtc_time(&wtime);
-		break;
-	}
-	case RTC_SET_TIME:	/* Set the RTC */
-	{
-		struct rtc_time rtc_tm;
-		unsigned char mon, day, hrs, min, sec, leap_yr;
-		unsigned int yrs;
-
-		if (!capable(CAP_SYS_TIME))
-			return -EACCES;
-
-		if (copy_from_user(&rtc_tm, (struct rtc_time __user *)arg,
-				   sizeof(struct rtc_time)))
-			return -EFAULT;
-
-		yrs = rtc_tm.tm_year;
-		mon = rtc_tm.tm_mon + 1;   /* tm_mon starts at zero */
-		day = rtc_tm.tm_mday;
-		hrs = rtc_tm.tm_hour;
-		min = rtc_tm.tm_min;
-		sec = rtc_tm.tm_sec;
-
-		if (yrs < 70)
-			return -EINVAL;
-
-		leap_yr = ((!(yrs % 4) && (yrs % 100)) || !(yrs % 400));
-
-		if ((mon > 12) || (day == 0))
-			return -EINVAL;
-
-		if (day > (days_in_mo[mon] + ((mon == 2) && leap_yr)))
-			return -EINVAL;
-			
-		if ((hrs >= 24) || (min >= 60) || (sec >= 60))
-			return -EINVAL;
-
-		if ( yrs > 169 )
-			return -EINVAL;
-
-		ppc_md.set_rtc_time(&rtc_tm);
-		
-		return 0;
-	}
-	case RTC_EPOCH_READ:	/* Read the epoch.	*/
-	{
-		return put_user (epoch, (unsigned long __user *)arg);
-	}
-	case RTC_EPOCH_SET:	/* Set the epoch.	*/
-	{
-		/* 
-		 * There were no RTC clocks before 1900.
-		 */
-		if (arg < 1900)
-			return -EINVAL;
-
-		if (!capable(CAP_SYS_TIME))
-			return -EACCES;
-
-		epoch = arg;
-		return 0;
-	}
-	default:
-		return -EINVAL;
-	}
-	return copy_to_user((void __user *)arg, &wtime, sizeof wtime) ? -EFAULT : 0;
-}
-
-static int rtc_open(struct inode *inode, struct file *file)
-{
-	nonseekable_open(inode, file);
-	return 0;
-}
-
-static int rtc_release(struct inode *inode, struct file *file)
-{
-	return 0;
-}
-
-/*
- *	The various file operations we support.
- */
-static struct file_operations rtc_fops = {
-	.owner =	THIS_MODULE,
-	.llseek =	no_llseek,
-	.read =		rtc_read,
-	.ioctl =	rtc_ioctl,
-	.open =		rtc_open,
-	.release =	rtc_release,
-};
-
-static struct miscdevice rtc_dev = {
-	.minor =	RTC_MINOR,
-	.name =		"rtc",
-	.fops =		&rtc_fops
-};
-
-static int __init rtc_init(void)
-{
-	int retval;
-
-	retval = misc_register(&rtc_dev);
-	if(retval < 0)
-		return retval;
-
-#ifdef CONFIG_PROC_FS
-	if (create_proc_read_entry("driver/rtc", 0, NULL, rtc_read_proc, NULL)
-			== NULL) {
-		misc_deregister(&rtc_dev);
-		return -ENOMEM;
-	}
-#endif
-
-	printk(KERN_INFO "i/pSeries Real Time Clock Driver v" RTC_VERSION "\n");
-
-	return 0;
-}
-
-static void __exit rtc_exit (void)
-{
-	remove_proc_entry ("driver/rtc", NULL);
-	misc_deregister(&rtc_dev);
-}
-
-module_init(rtc_init);
-module_exit(rtc_exit);
-
-/*
- *	Info exported via "/proc/driver/rtc".
- */
-
-static int rtc_proc_output (char *buf)
-{
-	
-	char *p;
-	struct rtc_time tm;
-	
-	p = buf;
-
-	ppc_md.get_rtc_time(&tm);
-
-	/*
-	 * There is no way to tell if the luser has the RTC set for local
-	 * time or for Universal Standard Time (GMT). Probably local though.
-	 */
-	p += sprintf(p,
-		     "rtc_time\t: %02d:%02d:%02d\n"
-		     "rtc_date\t: %04d-%02d-%02d\n"
-	 	     "rtc_epoch\t: %04lu\n",
-		     tm.tm_hour, tm.tm_min, tm.tm_sec,
-		     tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday, epoch);
-
-	p += sprintf(p,
-		     "DST_enable\t: no\n"
-		     "BCD\t\t: yes\n"
-		     "24hr\t\t: yes\n" );
-
-	return  p - buf;
-}
-
-static int rtc_read_proc(char *page, char **start, off_t off,
-                         int count, int *eof, void *data)
-{
-        int len = rtc_proc_output (page);
-        if (len <= off+count) *eof = 1;
-        *start = page + off;
-        len -= off;
-        if (len>count) len = count;
-        if (len<0) len = 0;
-        return len;
-}
-
-#ifdef CONFIG_PPC_ISERIES
-/*
- * Get the RTC from the virtual service processor
- * This requires flowing LpEvents to the primary partition
- */
-void iSeries_get_rtc_time(struct rtc_time *rtc_tm)
-{
-	if (piranha_simulator)
-		return;
-
-	mf_get_rtc(rtc_tm);
-	rtc_tm->tm_mon--;
-}
-
-/*
- * Set the RTC in the virtual service processor
- * This requires flowing LpEvents to the primary partition
- */
-int iSeries_set_rtc_time(struct rtc_time *tm)
-{
-	mf_set_rtc(tm);
-	return 0;
-}
-
-void iSeries_get_boot_time(struct rtc_time *tm)
-{
-	if ( piranha_simulator )
-		return;
-
-	mf_get_boot_rtc(tm);
-	tm->tm_mon  -= 1;
-}
-#endif
-
-#ifdef CONFIG_PPC_RTAS
-#define MAX_RTC_WAIT 5000	/* 5 sec */
-#define RTAS_CLOCK_BUSY (-2)
-void rtas_get_boot_time(struct rtc_time *rtc_tm)
-{
-	int ret[8];
-	int error, wait_time;
-	unsigned long max_wait_tb;
-
-	max_wait_tb = __get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT;
-	do {
-		error = rtas_call(rtas_token("get-time-of-day"), 0, 8, ret);
-		if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) {
-			wait_time = rtas_extended_busy_delay_time(error);
-			/* This is boot time so we spin. */
-			udelay(wait_time*1000);
-			error = RTAS_CLOCK_BUSY;
-		}
-	} while (error == RTAS_CLOCK_BUSY && (__get_tb() < max_wait_tb));
-
-	if (error != 0 && printk_ratelimit()) {
-		printk(KERN_WARNING "error: reading the clock failed (%d)\n",
-			error);
-		return;
-	}
-
-	rtc_tm->tm_sec = ret[5];
-	rtc_tm->tm_min = ret[4];
-	rtc_tm->tm_hour = ret[3];
-	rtc_tm->tm_mday = ret[2];
-	rtc_tm->tm_mon = ret[1] - 1;
-	rtc_tm->tm_year = ret[0] - 1900;
-}
-
-/* NOTE: get_rtc_time will get an error if executed in interrupt context
- * and if a delay is needed to read the clock.  In this case we just
- * silently return without updating rtc_tm.
- */
-void rtas_get_rtc_time(struct rtc_time *rtc_tm)
-{
-        int ret[8];
-	int error, wait_time;
-	unsigned long max_wait_tb;
-
-	max_wait_tb = __get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT;
-	do {
-		error = rtas_call(rtas_token("get-time-of-day"), 0, 8, ret);
-		if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) {
-			if (in_interrupt() && printk_ratelimit()) {
-				printk(KERN_WARNING "error: reading clock would delay interrupt\n");
-				return;	/* delay not allowed */
-			}
-			wait_time = rtas_extended_busy_delay_time(error);
-			msleep_interruptible(wait_time);
-			error = RTAS_CLOCK_BUSY;
-		}
-	} while (error == RTAS_CLOCK_BUSY && (__get_tb() < max_wait_tb));
-
-        if (error != 0 && printk_ratelimit()) {
-                printk(KERN_WARNING "error: reading the clock failed (%d)\n",
-		       error);
-		return;
-        }
-
-	rtc_tm->tm_sec = ret[5];
-	rtc_tm->tm_min = ret[4];
-	rtc_tm->tm_hour = ret[3];
-	rtc_tm->tm_mday = ret[2];
-	rtc_tm->tm_mon = ret[1] - 1;
-	rtc_tm->tm_year = ret[0] - 1900;
-}
-
-int rtas_set_rtc_time(struct rtc_time *tm)
-{
-	int error, wait_time;
-	unsigned long max_wait_tb;
-
-	max_wait_tb = __get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT;
-	do {
-	        error = rtas_call(rtas_token("set-time-of-day"), 7, 1, NULL,
-				  tm->tm_year + 1900, tm->tm_mon + 1, 
-				  tm->tm_mday, tm->tm_hour, tm->tm_min, 
-				  tm->tm_sec, 0);
-		if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) {
-			if (in_interrupt())
-				return 1;	/* probably decrementer */
-			wait_time = rtas_extended_busy_delay_time(error);
-			msleep_interruptible(wait_time);
-			error = RTAS_CLOCK_BUSY;
-		}
-	} while (error == RTAS_CLOCK_BUSY && (__get_tb() < max_wait_tb));
-
-        if (error != 0 && printk_ratelimit())
-                printk(KERN_WARNING "error: setting the clock failed (%d)\n",
-		       error); 
-
-        return 0;
-}
-#endif
diff --git a/arch/ppc64/kernel/traps.c b/arch/ppc64/kernel/traps.c
deleted file mode 100644
index 7467ae508e6e..000000000000
--- a/arch/ppc64/kernel/traps.c
+++ /dev/null
@@ -1,568 +0,0 @@
-/*
- *  linux/arch/ppc64/kernel/traps.c
- *
- *  Copyright (C) 1995-1996  Gary Thomas (gdt@linuxppc.org)
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- *  Modified by Cort Dougan (cort@cs.nmt.edu)
- *  and Paul Mackerras (paulus@cs.anu.edu.au)
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware exceptions
- */
-
-#include <linux/config.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/kprobes.h>
-#include <asm/kdebug.h>
-
-#include <asm/pgtable.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/ppcdebug.h>
-#include <asm/rtas.h>
-#include <asm/systemcfg.h>
-#include <asm/machdep.h>
-#include <asm/pmc.h>
-
-#ifdef CONFIG_DEBUGGER
-int (*__debugger)(struct pt_regs *regs);
-int (*__debugger_ipi)(struct pt_regs *regs);
-int (*__debugger_bpt)(struct pt_regs *regs);
-int (*__debugger_sstep)(struct pt_regs *regs);
-int (*__debugger_iabr_match)(struct pt_regs *regs);
-int (*__debugger_dabr_match)(struct pt_regs *regs);
-int (*__debugger_fault_handler)(struct pt_regs *regs);
-
-EXPORT_SYMBOL(__debugger);
-EXPORT_SYMBOL(__debugger_ipi);
-EXPORT_SYMBOL(__debugger_bpt);
-EXPORT_SYMBOL(__debugger_sstep);
-EXPORT_SYMBOL(__debugger_iabr_match);
-EXPORT_SYMBOL(__debugger_dabr_match);
-EXPORT_SYMBOL(__debugger_fault_handler);
-#endif
-
-struct notifier_block *ppc64_die_chain;
-static DEFINE_SPINLOCK(die_notifier_lock);
-
-int register_die_notifier(struct notifier_block *nb)
-{
-	int err = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&die_notifier_lock, flags);
-	err = notifier_chain_register(&ppc64_die_chain, nb);
-	spin_unlock_irqrestore(&die_notifier_lock, flags);
-	return err;
-}
-
-/*
- * Trap & Exception support
- */
-
-static DEFINE_SPINLOCK(die_lock);
-
-int die(const char *str, struct pt_regs *regs, long err)
-{
-	static int die_counter;
-	int nl = 0;
-
-	if (debugger(regs))
-		return 1;
-
-	console_verbose();
-	spin_lock_irq(&die_lock);
-	bust_spinlocks(1);
-	printk("Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter);
-#ifdef CONFIG_PREEMPT
-	printk("PREEMPT ");
-	nl = 1;
-#endif
-#ifdef CONFIG_SMP
-	printk("SMP NR_CPUS=%d ", NR_CPUS);
-	nl = 1;
-#endif
-#ifdef CONFIG_DEBUG_PAGEALLOC
-	printk("DEBUG_PAGEALLOC ");
-	nl = 1;
-#endif
-#ifdef CONFIG_NUMA
-	printk("NUMA ");
-	nl = 1;
-#endif
-	switch(systemcfg->platform) {
-		case PLATFORM_PSERIES:
-			printk("PSERIES ");
-			nl = 1;
-			break;
-		case PLATFORM_PSERIES_LPAR:
-			printk("PSERIES LPAR ");
-			nl = 1;
-			break;
-		case PLATFORM_ISERIES_LPAR:
-			printk("ISERIES LPAR ");
-			nl = 1;
-			break;
-		case PLATFORM_POWERMAC:
-			printk("POWERMAC ");
-			nl = 1;
-			break;
-		case PLATFORM_BPA:
-			printk("BPA ");
-			nl = 1;
-			break;
-	}
-	if (nl)
-		printk("\n");
-	print_modules();
-	show_regs(regs);
-	bust_spinlocks(0);
-	spin_unlock_irq(&die_lock);
-
-	if (in_interrupt())
-		panic("Fatal exception in interrupt");
-
-	if (panic_on_oops) {
-		printk(KERN_EMERG "Fatal exception: panic in 5 seconds\n");
-		ssleep(5);
-		panic("Fatal exception");
-	}
-	do_exit(SIGSEGV);
-
-	return 0;
-}
-
-void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr)
-{
-	siginfo_t info;
-
-	if (!user_mode(regs)) {
-		if (die("Exception in kernel mode", regs, signr))
-			return;
-	}
-
-	memset(&info, 0, sizeof(info));
-	info.si_signo = signr;
-	info.si_code = code;
-	info.si_addr = (void __user *) addr;
-	force_sig_info(signr, &info, current);
-}
-
-void system_reset_exception(struct pt_regs *regs)
-{
-	/* See if any machine dependent calls */
-	if (ppc_md.system_reset_exception)
-		ppc_md.system_reset_exception(regs);
-
-	die("System Reset", regs, 0);
-
-	/* Must die if the interrupt is not recoverable */
-	if (!(regs->msr & MSR_RI))
-		panic("Unrecoverable System Reset");
-
-	/* What should we do here? We could issue a shutdown or hard reset. */
-}
-
-void machine_check_exception(struct pt_regs *regs)
-{
-	int recover = 0;
-
-	/* See if any machine dependent calls */
-	if (ppc_md.machine_check_exception)
-		recover = ppc_md.machine_check_exception(regs);
-
-	if (recover)
-		return;
-
-	if (debugger_fault_handler(regs))
-		return;
-	die("Machine check", regs, 0);
-
-	/* Must die if the interrupt is not recoverable */
-	if (!(regs->msr & MSR_RI))
-		panic("Unrecoverable Machine check");
-}
-
-void unknown_exception(struct pt_regs *regs)
-{
-	printk("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
-	       regs->nip, regs->msr, regs->trap);
-
-	_exception(SIGTRAP, regs, 0, 0);
-}
-
-void instruction_breakpoint_exception(struct pt_regs *regs)
-{
-	if (notify_die(DIE_IABR_MATCH, "iabr_match", regs, 5,
-					5, SIGTRAP) == NOTIFY_STOP)
-		return;
-	if (debugger_iabr_match(regs))
-		return;
-	_exception(SIGTRAP, regs, TRAP_BRKPT, regs->nip);
-}
-
-void __kprobes single_step_exception(struct pt_regs *regs)
-{
-	regs->msr &= ~MSR_SE;  /* Turn off 'trace' bit */
-
-	if (notify_die(DIE_SSTEP, "single_step", regs, 5,
-					5, SIGTRAP) == NOTIFY_STOP)
-		return;
-	if (debugger_sstep(regs))
-		return;
-
-	_exception(SIGTRAP, regs, TRAP_TRACE, regs->nip);
-}
-
-/*
- * After we have successfully emulated an instruction, we have to
- * check if the instruction was being single-stepped, and if so,
- * pretend we got a single-step exception.  This was pointed out
- * by Kumar Gala.  -- paulus
- */
-static inline void emulate_single_step(struct pt_regs *regs)
-{
-	if (regs->msr & MSR_SE)
-		single_step_exception(regs);
-}
-
-static void parse_fpe(struct pt_regs *regs)
-{
-	int code = 0;
-	unsigned long fpscr;
-
-	flush_fp_to_thread(current);
-
-	fpscr = current->thread.fpscr;
-
-	/* Invalid operation */
-	if ((fpscr & FPSCR_VE) && (fpscr & FPSCR_VX))
-		code = FPE_FLTINV;
-
-	/* Overflow */
-	else if ((fpscr & FPSCR_OE) && (fpscr & FPSCR_OX))
-		code = FPE_FLTOVF;
-
-	/* Underflow */
-	else if ((fpscr & FPSCR_UE) && (fpscr & FPSCR_UX))
-		code = FPE_FLTUND;
-
-	/* Divide by zero */
-	else if ((fpscr & FPSCR_ZE) && (fpscr & FPSCR_ZX))
-		code = FPE_FLTDIV;
-
-	/* Inexact result */
-	else if ((fpscr & FPSCR_XE) && (fpscr & FPSCR_XX))
-		code = FPE_FLTRES;
-
-	_exception(SIGFPE, regs, code, regs->nip);
-}
-
-/*
- * Illegal instruction emulation support.  Return non-zero if we can't
- * emulate, or -EFAULT if the associated memory access caused an access
- * fault.  Return zero on success.
- */
-
-#define INST_MFSPR_PVR		0x7c1f42a6
-#define INST_MFSPR_PVR_MASK	0xfc1fffff
-
-#define INST_DCBA		0x7c0005ec
-#define INST_DCBA_MASK		0x7c0007fe
-
-#define INST_MCRXR		0x7c000400
-#define INST_MCRXR_MASK		0x7c0007fe
-
-static int emulate_instruction(struct pt_regs *regs)
-{
-	unsigned int instword;
-
-	if (!user_mode(regs))
-		return -EINVAL;
-
-	CHECK_FULL_REGS(regs);
-
-	if (get_user(instword, (unsigned int __user *)(regs->nip)))
-		return -EFAULT;
-
-	/* Emulate the mfspr rD, PVR. */
-	if ((instword & INST_MFSPR_PVR_MASK) == INST_MFSPR_PVR) {
-		unsigned int rd;
-
-		rd = (instword >> 21) & 0x1f;
-		regs->gpr[rd] = mfspr(SPRN_PVR);
-		return 0;
-	}
-
-	/* Emulating the dcba insn is just a no-op.  */
-	if ((instword & INST_DCBA_MASK) == INST_DCBA) {
-		static int warned;
-
-		if (!warned) {
-			printk(KERN_WARNING
-			       "process %d (%s) uses obsolete 'dcba' insn\n",
-			       current->pid, current->comm);
-			warned = 1;
-		}
-		return 0;
-	}
-
-	/* Emulate the mcrxr insn.  */
-	if ((instword & INST_MCRXR_MASK) == INST_MCRXR) {
-		static int warned;
-		unsigned int shift;
-
-		if (!warned) {
-			printk(KERN_WARNING
-			       "process %d (%s) uses obsolete 'mcrxr' insn\n",
-			       current->pid, current->comm);
-			warned = 1;
-		}
-
-		shift = (instword >> 21) & 0x1c;
-		regs->ccr &= ~(0xf0000000 >> shift);
-		regs->ccr |= (regs->xer & 0xf0000000) >> shift;
-		regs->xer &= ~0xf0000000;
-		return 0;
-	}
-
-	return -EINVAL;
-}
-
-/*
- * Look through the list of trap instructions that are used for BUG(),
- * BUG_ON() and WARN_ON() and see if we hit one.  At this point we know
- * that the exception was caused by a trap instruction of some kind.
- * Returns 1 if we should continue (i.e. it was a WARN_ON) or 0
- * otherwise.
- */
-extern struct bug_entry __start___bug_table[], __stop___bug_table[];
-
-#ifndef CONFIG_MODULES
-#define module_find_bug(x)	NULL
-#endif
-
-struct bug_entry *find_bug(unsigned long bugaddr)
-{
-	struct bug_entry *bug;
-
-	for (bug = __start___bug_table; bug < __stop___bug_table; ++bug)
-		if (bugaddr == bug->bug_addr)
-			return bug;
-	return module_find_bug(bugaddr);
-}
-
-static int
-check_bug_trap(struct pt_regs *regs)
-{
-	struct bug_entry *bug;
-	unsigned long addr;
-
-	if (regs->msr & MSR_PR)
-		return 0;	/* not in kernel */
-	addr = regs->nip;	/* address of trap instruction */
-	if (addr < PAGE_OFFSET)
-		return 0;
-	bug = find_bug(regs->nip);
-	if (bug == NULL)
-		return 0;
-	if (bug->line & BUG_WARNING_TRAP) {
-		/* this is a WARN_ON rather than BUG/BUG_ON */
-		printk(KERN_ERR "Badness in %s at %s:%d\n",
-		       bug->function, bug->file,
-		      (unsigned int)bug->line & ~BUG_WARNING_TRAP);
-		show_stack(current, (void *)regs->gpr[1]);
-		return 1;
-	}
-	printk(KERN_CRIT "kernel BUG in %s at %s:%d!\n",
-	       bug->function, bug->file, (unsigned int)bug->line);
-	return 0;
-}
-
-void __kprobes program_check_exception(struct pt_regs *regs)
-{
-	if (debugger_fault_handler(regs))
-		return;
-
-	if (regs->msr & 0x100000) {
-		/* IEEE FP exception */
-		parse_fpe(regs);
-	} else if (regs->msr & 0x20000) {
-		/* trap exception */
-
-		if (notify_die(DIE_BPT, "breakpoint", regs, 5,
-					5, SIGTRAP) == NOTIFY_STOP)
-			return;
-		if (debugger_bpt(regs))
-			return;
-
-		if (check_bug_trap(regs)) {
-			regs->nip += 4;
-			return;
-		}
-		_exception(SIGTRAP, regs, TRAP_BRKPT, regs->nip);
-
-	} else {
-		/* Privileged or illegal instruction; try to emulate it. */
-		switch (emulate_instruction(regs)) {
-		case 0:
-			regs->nip += 4;
-			emulate_single_step(regs);
-			break;
-
-		case -EFAULT:
-			_exception(SIGSEGV, regs, SEGV_MAPERR, regs->nip);
-			break;
-
-		default:
-			if (regs->msr & 0x40000)
-				/* priveleged */
-				_exception(SIGILL, regs, ILL_PRVOPC, regs->nip);
-			else
-				/* illegal */
-				_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
-			break;
-		}
-	}
-}
-
-void kernel_fp_unavailable_exception(struct pt_regs *regs)
-{
-	printk(KERN_EMERG "Unrecoverable FP Unavailable Exception "
-			  "%lx at %lx\n", regs->trap, regs->nip);
-	die("Unrecoverable FP Unavailable Exception", regs, SIGABRT);
-}
-
-void altivec_unavailable_exception(struct pt_regs *regs)
-{
-	if (user_mode(regs)) {
-		/* A user program has executed an altivec instruction,
-		   but this kernel doesn't support altivec. */
-		_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
-		return;
-	}
-	printk(KERN_EMERG "Unrecoverable VMX/Altivec Unavailable Exception "
-			  "%lx at %lx\n", regs->trap, regs->nip);
-	die("Unrecoverable VMX/Altivec Unavailable Exception", regs, SIGABRT);
-}
-
-extern perf_irq_t perf_irq;
-
-void performance_monitor_exception(struct pt_regs *regs)
-{
-	perf_irq(regs);
-}
-
-void alignment_exception(struct pt_regs *regs)
-{
-	int fixed;
-
-	fixed = fix_alignment(regs);
-
-	if (fixed == 1) {
-		regs->nip += 4;	/* skip over emulated instruction */
-		emulate_single_step(regs);
-		return;
-	}
-
-	/* Operand address was bad */	
-	if (fixed == -EFAULT) {
-		if (user_mode(regs)) {
-			_exception(SIGSEGV, regs, SEGV_MAPERR, regs->dar);
-		} else {
-			/* Search exception table */
-			bad_page_fault(regs, regs->dar, SIGSEGV);
-		}
-
-		return;
-	}
-
-	_exception(SIGBUS, regs, BUS_ADRALN, regs->nip);
-}
-
-#ifdef CONFIG_ALTIVEC
-void altivec_assist_exception(struct pt_regs *regs)
-{
-	int err;
-	siginfo_t info;
-
-	if (!user_mode(regs)) {
-		printk(KERN_EMERG "VMX/Altivec assist exception in kernel mode"
-		       " at %lx\n", regs->nip);
-		die("Kernel VMX/Altivec assist exception", regs, SIGILL);
-	}
-
-	flush_altivec_to_thread(current);
-
-	err = emulate_altivec(regs);
-	if (err == 0) {
-		regs->nip += 4;		/* skip emulated instruction */
-		emulate_single_step(regs);
-		return;
-	}
-
-	if (err == -EFAULT) {
-		/* got an error reading the instruction */
-		info.si_signo = SIGSEGV;
-		info.si_errno = 0;
-		info.si_code = SEGV_MAPERR;
-		info.si_addr = (void __user *) regs->nip;
-		force_sig_info(SIGSEGV, &info, current);
-	} else {
-		/* didn't recognize the instruction */
-		/* XXX quick hack for now: set the non-Java bit in the VSCR */
-		if (printk_ratelimit())
-			printk(KERN_ERR "Unrecognized altivec instruction "
-			       "in %s at %lx\n", current->comm, regs->nip);
-		current->thread.vscr.u[3] |= 0x10000;
-	}
-}
-#endif /* CONFIG_ALTIVEC */
-
-/*
- * We enter here if we get an unrecoverable exception, that is, one
- * that happened at a point where the RI (recoverable interrupt) bit
- * in the MSR is 0.  This indicates that SRR0/1 are live, and that
- * we therefore lost state by taking this exception.
- */
-void unrecoverable_exception(struct pt_regs *regs)
-{
-	printk(KERN_EMERG "Unrecoverable exception %lx at %lx\n",
-	       regs->trap, regs->nip);
-	die("Unrecoverable exception", regs, SIGABRT);
-}
-
-/*
- * We enter here if we discover during exception entry that we are
- * running in supervisor mode with a userspace value in the stack pointer.
- */
-void kernel_bad_stack(struct pt_regs *regs)
-{
-	printk(KERN_EMERG "Bad kernel stack pointer %lx at %lx\n",
-	       regs->gpr[1], regs->nip);
-	die("Bad kernel stack pointer", regs, SIGABRT);
-}
-
-void __init trap_init(void)
-{
-}
diff --git a/arch/ppc64/kernel/vdso32/gettimeofday.S b/arch/ppc64/kernel/vdso32/gettimeofday.S
deleted file mode 100644
index 07f1c1c650c8..000000000000
--- a/arch/ppc64/kernel/vdso32/gettimeofday.S
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * Userland implementation of gettimeofday() for 32 bits processes in a
- * ppc64 kernel for use in the vDSO
- *
- * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org), IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <linux/config.h>
-#include <asm/processor.h>
-#include <asm/ppc_asm.h>
-#include <asm/vdso.h>
-#include <asm/asm-offsets.h>
-#include <asm/unistd.h>
-
-	.text
-/*
- * Exact prototype of gettimeofday
- *
- * int __kernel_gettimeofday(struct timeval *tv, struct timezone *tz);
- *
- */
-V_FUNCTION_BEGIN(__kernel_gettimeofday)
-  .cfi_startproc
-	mflr	r12
-  .cfi_register lr,r12
-
-	mr	r10,r3			/* r10 saves tv */
-	mr	r11,r4			/* r11 saves tz */
-	bl	__get_datapage@local	/* get data page */
-	mr	r9, r3			/* datapage ptr in r9 */
-	bl	__do_get_xsec@local	/* get xsec from tb & kernel */
-	bne-	2f			/* out of line -> do syscall */
-
-	/* seconds are xsec >> 20 */
-	rlwinm	r5,r4,12,20,31
-	rlwimi	r5,r3,12,0,19
-	stw	r5,TVAL32_TV_SEC(r10)
-
-	/* get remaining xsec and convert to usec. we scale
-	 * up remaining xsec by 12 bits and get the top 32 bits
-	 * of the multiplication
-	 */
-	rlwinm	r5,r4,12,0,19
-	lis	r6,1000000@h
-	ori	r6,r6,1000000@l
-	mulhwu	r5,r5,r6
-	stw	r5,TVAL32_TV_USEC(r10)
-
-	cmpli	cr0,r11,0		/* check if tz is NULL */
-	beq	1f
-	lwz	r4,CFG_TZ_MINUTEWEST(r9)/* fill tz */
-	lwz	r5,CFG_TZ_DSTTIME(r9)
-	stw	r4,TZONE_TZ_MINWEST(r11)
-	stw	r5,TZONE_TZ_DSTTIME(r11)
-
-1:	mtlr	r12
-	li	r3,0
-	blr
-
-2:	mr	r3,r10
-	mr	r4,r11
-	li	r0,__NR_gettimeofday
-	sc
-	b	1b
-  .cfi_endproc
-V_FUNCTION_END(__kernel_gettimeofday)
-
-/*
- * This is the core of gettimeofday(), it returns the xsec
- * value in r3 & r4 and expects the datapage ptr (non clobbered)
- * in r9. clobbers r0,r4,r5,r6,r7,r8
-*/
-__do_get_xsec:
-  .cfi_startproc
-	/* Check for update count & load values. We use the low
-	 * order 32 bits of the update count
-	 */
-1:	lwz	r8,(CFG_TB_UPDATE_COUNT+4)(r9)
-	andi.	r0,r8,1			/* pending update ? loop */
-	bne-	1b
-	xor	r0,r8,r8		/* create dependency */
-	add	r9,r9,r0
-
-	/* Load orig stamp (offset to TB) */
-	lwz	r5,CFG_TB_ORIG_STAMP(r9)
-	lwz	r6,(CFG_TB_ORIG_STAMP+4)(r9)
-
-	/* Get a stable TB value */
-2:	mftbu	r3
-	mftbl	r4
-	mftbu	r0
-	cmpl	cr0,r3,r0
-	bne-	2b
-
-	/* Substract tb orig stamp. If the high part is non-zero, we jump to the
-	 * slow path which call the syscall. If it's ok, then we have our 32 bits
-	 * tb_ticks value in r7
-	 */
-	subfc	r7,r6,r4
-	subfe.	r0,r5,r3
-	bne-	3f
-
-	/* Load scale factor & do multiplication */
-	lwz	r5,CFG_TB_TO_XS(r9)	/* load values */
-	lwz	r6,(CFG_TB_TO_XS+4)(r9)
-	mulhwu	r4,r7,r5
-	mulhwu	r6,r7,r6
-	mullw	r6,r7,r5
-	addc	r6,r6,r0
-
-	/* At this point, we have the scaled xsec value in r4 + XER:CA
-	 * we load & add the stamp since epoch
-	 */
-	lwz	r5,CFG_STAMP_XSEC(r9)
-	lwz	r6,(CFG_STAMP_XSEC+4)(r9)
-	adde	r4,r4,r6
-	addze	r3,r5
-
-	/* We now have our result in r3,r4. We create a fake dependency
-	 * on that result and re-check the counter
-	 */
-	xor	r0,r4,r4
-	add	r9,r9,r0
-	lwz	r0,(CFG_TB_UPDATE_COUNT+4)(r9)
-        cmpl    cr0,r8,r0		/* check if updated */
-	bne-	1b
-
-	/* Warning ! The caller expects CR:EQ to be set to indicate a
-	 * successful calculation (so it won't fallback to the syscall
-	 * method). We have overriden that CR bit in the counter check,
-	 * but fortunately, the loop exit condition _is_ CR:EQ set, so
-	 * we can exit safely here. If you change this code, be careful
-	 * of that side effect.
-	 */
-3:	blr
-  .cfi_endproc
diff --git a/arch/ppc64/kernel/vdso64/gettimeofday.S b/arch/ppc64/kernel/vdso64/gettimeofday.S
deleted file mode 100644
index f6df8028570a..000000000000
--- a/arch/ppc64/kernel/vdso64/gettimeofday.S
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Userland implementation of gettimeofday() for 64 bits processes in a
- * ppc64 kernel for use in the vDSO
- *
- * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org),
- *                    IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <linux/config.h>
-#include <asm/processor.h>
-#include <asm/ppc_asm.h>
-#include <asm/vdso.h>
-#include <asm/asm-offsets.h>
-
-	.text
-/*
- * Exact prototype of gettimeofday
- *
- * int __kernel_gettimeofday(struct timeval *tv, struct timezone *tz);
- *
- */
-V_FUNCTION_BEGIN(__kernel_gettimeofday)
-  .cfi_startproc
-	mflr	r12
-  .cfi_register lr,r12
-
-	mr	r11,r3			/* r11 holds tv */
-	mr	r10,r4			/* r10 holds tz */
-	bl	V_LOCAL_FUNC(__get_datapage)		/* get data page */
-	bl	V_LOCAL_FUNC(__do_get_xsec)		/* get xsec from tb & kernel */
-	lis     r7,15			/* r7 = 1000000 = USEC_PER_SEC */
-	ori     r7,r7,16960
-	rldicl  r5,r4,44,20		/* r5 = sec = xsec / XSEC_PER_SEC */
-	rldicr  r6,r5,20,43		/* r6 = sec * XSEC_PER_SEC */
-	std	r5,TVAL64_TV_SEC(r11)	/* store sec in tv */
-	subf	r0,r6,r4		/* r0 = xsec = (xsec - r6) */
-	mulld   r0,r0,r7		/* usec = (xsec * USEC_PER_SEC) / XSEC_PER_SEC */
-	rldicl  r0,r0,44,20
-	cmpldi	cr0,r10,0		/* check if tz is NULL */
-	std	r0,TVAL64_TV_USEC(r11)	/* store usec in tv */
-	beq	1f
-	lwz	r4,CFG_TZ_MINUTEWEST(r3)/* fill tz */
-	lwz	r5,CFG_TZ_DSTTIME(r3)
-	stw	r4,TZONE_TZ_MINWEST(r10)
-	stw	r5,TZONE_TZ_DSTTIME(r10)
-1:	mtlr	r12
-	li	r3,0			/* always success */
-	blr
-  .cfi_endproc
-V_FUNCTION_END(__kernel_gettimeofday)
-
-
-/*
- * This is the core of gettimeofday(), it returns the xsec
- * value in r4 and expects the datapage ptr (non clobbered)
- * in r3. clobbers r0,r4,r5,r6,r7,r8
-*/
-V_FUNCTION_BEGIN(__do_get_xsec)
-  .cfi_startproc
-	/* check for update count & load values */
-1:	ld	r7,CFG_TB_UPDATE_COUNT(r3)
-	andi.	r0,r4,1			/* pending update ? loop */
-	bne-	1b
-	xor	r0,r4,r4		/* create dependency */
-	add	r3,r3,r0
-
-	/* Get TB & offset it */
-	mftb	r8
-	ld	r9,CFG_TB_ORIG_STAMP(r3)
-	subf	r8,r9,r8
-
-	/* Scale result */
-	ld	r5,CFG_TB_TO_XS(r3)
-	mulhdu	r8,r8,r5
-
-	/* Add stamp since epoch */
-	ld	r6,CFG_STAMP_XSEC(r3)
-	add	r4,r6,r8
-
-	xor	r0,r4,r4
-	add	r3,r3,r0
-	ld	r0,CFG_TB_UPDATE_COUNT(r3)
-        cmpld   cr0,r0,r7		/* check if updated */
-	bne-	1b
-	blr
-  .cfi_endproc
-V_FUNCTION_END(__do_get_xsec)
diff --git a/arch/ppc64/kernel/vecemu.c b/arch/ppc64/kernel/vecemu.c
deleted file mode 100644
index cb207629f21f..000000000000
--- a/arch/ppc64/kernel/vecemu.c
+++ /dev/null
@@ -1,346 +0,0 @@
-/*
- * Routines to emulate some Altivec/VMX instructions, specifically
- * those that can trap when given denormalized operands in Java mode.
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <asm/ptrace.h>
-#include <asm/processor.h>
-#include <asm/uaccess.h>
-
-/* Functions in vector.S */
-extern void vaddfp(vector128 *dst, vector128 *a, vector128 *b);
-extern void vsubfp(vector128 *dst, vector128 *a, vector128 *b);
-extern void vmaddfp(vector128 *dst, vector128 *a, vector128 *b, vector128 *c);
-extern void vnmsubfp(vector128 *dst, vector128 *a, vector128 *b, vector128 *c);
-extern void vrefp(vector128 *dst, vector128 *src);
-extern void vrsqrtefp(vector128 *dst, vector128 *src);
-extern void vexptep(vector128 *dst, vector128 *src);
-
-static unsigned int exp2s[8] = {
-	0x800000,
-	0x8b95c2,
-	0x9837f0,
-	0xa5fed7,
-	0xb504f3,
-	0xc5672a,
-	0xd744fd,
-	0xeac0c7
-};
-
-/*
- * Computes an estimate of 2^x.  The `s' argument is the 32-bit
- * single-precision floating-point representation of x.
- */
-static unsigned int eexp2(unsigned int s)
-{
-	int exp, pwr;
-	unsigned int mant, frac;
-
-	/* extract exponent field from input */
-	exp = ((s >> 23) & 0xff) - 127;
-	if (exp > 7) {
-		/* check for NaN input */
-		if (exp == 128 && (s & 0x7fffff) != 0)
-			return s | 0x400000;	/* return QNaN */
-		/* 2^-big = 0, 2^+big = +Inf */
-		return (s & 0x80000000)? 0: 0x7f800000;	/* 0 or +Inf */
-	}
-	if (exp < -23)
-		return 0x3f800000;	/* 1.0 */
-
-	/* convert to fixed point integer in 9.23 representation */
-	pwr = (s & 0x7fffff) | 0x800000;
-	if (exp > 0)
-		pwr <<= exp;
-	else
-		pwr >>= -exp;
-	if (s & 0x80000000)
-		pwr = -pwr;
-
-	/* extract integer part, which becomes exponent part of result */
-	exp = (pwr >> 23) + 126;
-	if (exp >= 254)
-		return 0x7f800000;
-	if (exp < -23)
-		return 0;
-
-	/* table lookup on top 3 bits of fraction to get mantissa */
-	mant = exp2s[(pwr >> 20) & 7];
-
-	/* linear interpolation using remaining 20 bits of fraction */
-	asm("mulhwu %0,%1,%2" : "=r" (frac)
-	    : "r" (pwr << 12), "r" (0x172b83ff));
-	asm("mulhwu %0,%1,%2" : "=r" (frac) : "r" (frac), "r" (mant));
-	mant += frac;
-
-	if (exp >= 0)
-		return mant + (exp << 23);
-
-	/* denormalized result */
-	exp = -exp;
-	mant += 1 << (exp - 1);
-	return mant >> exp;
-}
-
-/*
- * Computes an estimate of log_2(x).  The `s' argument is the 32-bit
- * single-precision floating-point representation of x.
- */
-static unsigned int elog2(unsigned int s)
-{
-	int exp, mant, lz, frac;
-
-	exp = s & 0x7f800000;
-	mant = s & 0x7fffff;
-	if (exp == 0x7f800000) {	/* Inf or NaN */
-		if (mant != 0)
-			s |= 0x400000;	/* turn NaN into QNaN */
-		return s;
-	}
-	if ((exp | mant) == 0)		/* +0 or -0 */
-		return 0xff800000;	/* return -Inf */
-
-	if (exp == 0) {
-		/* denormalized */
-		asm("cntlzw %0,%1" : "=r" (lz) : "r" (mant));
-		mant <<= lz - 8;
-		exp = (-118 - lz) << 23;
-	} else {
-		mant |= 0x800000;
-		exp -= 127 << 23;
-	}
-
-	if (mant >= 0xb504f3) {				/* 2^0.5 * 2^23 */
-		exp |= 0x400000;			/* 0.5 * 2^23 */
-		asm("mulhwu %0,%1,%2" : "=r" (mant)
-		    : "r" (mant), "r" (0xb504f334));	/* 2^-0.5 * 2^32 */
-	}
-	if (mant >= 0x9837f0) {				/* 2^0.25 * 2^23 */
-		exp |= 0x200000;			/* 0.25 * 2^23 */
-		asm("mulhwu %0,%1,%2" : "=r" (mant)
-		    : "r" (mant), "r" (0xd744fccb));	/* 2^-0.25 * 2^32 */
-	}
-	if (mant >= 0x8b95c2) {				/* 2^0.125 * 2^23 */
-		exp |= 0x100000;			/* 0.125 * 2^23 */
-		asm("mulhwu %0,%1,%2" : "=r" (mant)
-		    : "r" (mant), "r" (0xeac0c6e8));	/* 2^-0.125 * 2^32 */
-	}
-	if (mant > 0x800000) {				/* 1.0 * 2^23 */
-		/* calculate (mant - 1) * 1.381097463 */
-		/* 1.381097463 == 0.125 / (2^0.125 - 1) */
-		asm("mulhwu %0,%1,%2" : "=r" (frac)
-		    : "r" ((mant - 0x800000) << 1), "r" (0xb0c7cd3a));
-		exp += frac;
-	}
-	s = exp & 0x80000000;
-	if (exp != 0) {
-		if (s)
-			exp = -exp;
-		asm("cntlzw %0,%1" : "=r" (lz) : "r" (exp));
-		lz = 8 - lz;
-		if (lz > 0)
-			exp >>= lz;
-		else if (lz < 0)
-			exp <<= -lz;
-		s += ((lz + 126) << 23) + exp;
-	}
-	return s;
-}
-
-#define VSCR_SAT	1
-
-static int ctsxs(unsigned int x, int scale, unsigned int *vscrp)
-{
-	int exp, mant;
-
-	exp = (x >> 23) & 0xff;
-	mant = x & 0x7fffff;
-	if (exp == 255 && mant != 0)
-		return 0;		/* NaN -> 0 */
-	exp = exp - 127 + scale;
-	if (exp < 0)
-		return 0;		/* round towards zero */
-	if (exp >= 31) {
-		/* saturate, unless the result would be -2^31 */
-		if (x + (scale << 23) != 0xcf000000)
-			*vscrp |= VSCR_SAT;
-		return (x & 0x80000000)? 0x80000000: 0x7fffffff;
-	}
-	mant |= 0x800000;
-	mant = (mant << 7) >> (30 - exp);
-	return (x & 0x80000000)? -mant: mant;
-}
-
-static unsigned int ctuxs(unsigned int x, int scale, unsigned int *vscrp)
-{
-	int exp;
-	unsigned int mant;
-
-	exp = (x >> 23) & 0xff;
-	mant = x & 0x7fffff;
-	if (exp == 255 && mant != 0)
-		return 0;		/* NaN -> 0 */
-	exp = exp - 127 + scale;
-	if (exp < 0)
-		return 0;		/* round towards zero */
-	if (x & 0x80000000) {
-		/* negative => saturate to 0 */
-		*vscrp |= VSCR_SAT;
-		return 0;
-	}
-	if (exp >= 32) {
-		/* saturate */
-		*vscrp |= VSCR_SAT;
-		return 0xffffffff;
-	}
-	mant |= 0x800000;
-	mant = (mant << 8) >> (31 - exp);
-	return mant;
-}
-
-/* Round to floating integer, towards 0 */
-static unsigned int rfiz(unsigned int x)
-{
-	int exp;
-
-	exp = ((x >> 23) & 0xff) - 127;
-	if (exp == 128 && (x & 0x7fffff) != 0)
-		return x | 0x400000;	/* NaN -> make it a QNaN */
-	if (exp >= 23)
-		return x;		/* it's an integer already (or Inf) */
-	if (exp < 0)
-		return x & 0x80000000;	/* |x| < 1.0 rounds to 0 */
-	return x & ~(0x7fffff >> exp);
-}
-
-/* Round to floating integer, towards +/- Inf */
-static unsigned int rfii(unsigned int x)
-{
-	int exp, mask;
-
-	exp = ((x >> 23) & 0xff) - 127;
-	if (exp == 128 && (x & 0x7fffff) != 0)
-		return x | 0x400000;	/* NaN -> make it a QNaN */
-	if (exp >= 23)
-		return x;		/* it's an integer already (or Inf) */
-	if ((x & 0x7fffffff) == 0)
-		return x;		/* +/-0 -> +/-0 */
-	if (exp < 0)
-		/* 0 < |x| < 1.0 rounds to +/- 1.0 */
-		return (x & 0x80000000) | 0x3f800000;
-	mask = 0x7fffff >> exp;
-	/* mantissa overflows into exponent - that's OK,
-	   it can't overflow into the sign bit */
-	return (x + mask) & ~mask;
-}
-
-/* Round to floating integer, to nearest */
-static unsigned int rfin(unsigned int x)
-{
-	int exp, half;
-
-	exp = ((x >> 23) & 0xff) - 127;
-	if (exp == 128 && (x & 0x7fffff) != 0)
-		return x | 0x400000;	/* NaN -> make it a QNaN */
-	if (exp >= 23)
-		return x;		/* it's an integer already (or Inf) */
-	if (exp < -1)
-		return x & 0x80000000;	/* |x| < 0.5 -> +/-0 */
-	if (exp == -1)
-		/* 0.5 <= |x| < 1.0 rounds to +/- 1.0 */
-		return (x & 0x80000000) | 0x3f800000;
-	half = 0x400000 >> exp;
-	/* add 0.5 to the magnitude and chop off the fraction bits */
-	return (x + half) & ~(0x7fffff >> exp);
-}
-
-int
-emulate_altivec(struct pt_regs *regs)
-{
-	unsigned int instr, i;
-	unsigned int va, vb, vc, vd;
-	vector128 *vrs;
-
-	if (get_user(instr, (unsigned int __user *) regs->nip))
-		return -EFAULT;
-	if ((instr >> 26) != 4)
-		return -EINVAL;		/* not an altivec instruction */
-	vd = (instr >> 21) & 0x1f;
-	va = (instr >> 16) & 0x1f;
-	vb = (instr >> 11) & 0x1f;
-	vc = (instr >> 6) & 0x1f;
-
-	vrs = current->thread.vr;
-	switch (instr & 0x3f) {
-	case 10:
-		switch (vc) {
-		case 0:	/* vaddfp */
-			vaddfp(&vrs[vd], &vrs[va], &vrs[vb]);
-			break;
-		case 1:	/* vsubfp */
-			vsubfp(&vrs[vd], &vrs[va], &vrs[vb]);
-			break;
-		case 4:	/* vrefp */
-			vrefp(&vrs[vd], &vrs[vb]);
-			break;
-		case 5:	/* vrsqrtefp */
-			vrsqrtefp(&vrs[vd], &vrs[vb]);
-			break;
-		case 6:	/* vexptefp */
-			for (i = 0; i < 4; ++i)
-				vrs[vd].u[i] = eexp2(vrs[vb].u[i]);
-			break;
-		case 7:	/* vlogefp */
-			for (i = 0; i < 4; ++i)
-				vrs[vd].u[i] = elog2(vrs[vb].u[i]);
-			break;
-		case 8:		/* vrfin */
-			for (i = 0; i < 4; ++i)
-				vrs[vd].u[i] = rfin(vrs[vb].u[i]);
-			break;
-		case 9:		/* vrfiz */
-			for (i = 0; i < 4; ++i)
-				vrs[vd].u[i] = rfiz(vrs[vb].u[i]);
-			break;
-		case 10:	/* vrfip */
-			for (i = 0; i < 4; ++i) {
-				u32 x = vrs[vb].u[i];
-				x = (x & 0x80000000)? rfiz(x): rfii(x);
-				vrs[vd].u[i] = x;
-			}
-			break;
-		case 11:	/* vrfim */
-			for (i = 0; i < 4; ++i) {
-				u32 x = vrs[vb].u[i];
-				x = (x & 0x80000000)? rfii(x): rfiz(x);
-				vrs[vd].u[i] = x;
-			}
-			break;
-		case 14:	/* vctuxs */
-			for (i = 0; i < 4; ++i)
-				vrs[vd].u[i] = ctuxs(vrs[vb].u[i], va,
-						&current->thread.vscr.u[3]);
-			break;
-		case 15:	/* vctsxs */
-			for (i = 0; i < 4; ++i)
-				vrs[vd].u[i] = ctsxs(vrs[vb].u[i], va,
-						&current->thread.vscr.u[3]);
-			break;
-		default:
-			return -EINVAL;
-		}
-		break;
-	case 46:	/* vmaddfp */
-		vmaddfp(&vrs[vd], &vrs[va], &vrs[vb], &vrs[vc]);
-		break;
-	case 47:	/* vnmsubfp */
-		vnmsubfp(&vrs[vd], &vrs[va], &vrs[vb], &vrs[vc]);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
diff --git a/arch/ppc64/kernel/vmlinux.lds.S b/arch/ppc64/kernel/vmlinux.lds.S
deleted file mode 100644
index 0306510bc4ff..000000000000
--- a/arch/ppc64/kernel/vmlinux.lds.S
+++ /dev/null
@@ -1,146 +0,0 @@
-#include <asm-generic/vmlinux.lds.h>
-
-OUTPUT_ARCH(powerpc:common64)
-jiffies = jiffies_64;
-SECTIONS
-{
-  /* Sections to be discarded. */
-  /DISCARD/ : {
-	*(.exitcall.exit)
-	}
-
-
-  /* Read-only sections, merged into text segment: */
-  .text : {
-	*(.text .text.*)
-	SCHED_TEXT
-	LOCK_TEXT
-	KPROBES_TEXT
-	*(.fixup)
-	. = ALIGN(4096);
-	_etext = .;
-	}
-
-  __ex_table : {
-	__start___ex_table = .;
-	*(__ex_table)
-	__stop___ex_table = .;
-	}
-
-  __bug_table : {
-	__start___bug_table = .;
-	*(__bug_table)
-	__stop___bug_table = .;
-	}
-
-  __ftr_fixup : {
-	__start___ftr_fixup = .;
-	*(__ftr_fixup)
-	__stop___ftr_fixup = .;
-	}
-
-  RODATA
-
-
-  /* will be freed after init */
-  . = ALIGN(4096);
-  __init_begin = .;
-
-  .init.text : {
-	_sinittext = .;
-	*(.init.text)
-	_einittext = .;
-	}
-
-  .init.data : {
-	*(.init.data)
-	}
-
-  . = ALIGN(16);
-  .init.setup : {
-	__setup_start = .;
-	*(.init.setup)
-	__setup_end = .;
-	}
-
-  .initcall.init : {
-	__initcall_start = .;
-	*(.initcall1.init)
-	*(.initcall2.init)
-	*(.initcall3.init)
-	*(.initcall4.init)
-	*(.initcall5.init)
-	*(.initcall6.init)
-	*(.initcall7.init)
-	__initcall_end = .;
-	}
-
-  .con_initcall.init : {
-	__con_initcall_start = .;
-	*(.con_initcall.init)
-	__con_initcall_end = .;
-	}
-
-  SECURITY_INIT
-
-  . = ALIGN(4096);
-  .init.ramfs : {
-	__initramfs_start = .;
-	*(.init.ramfs)
-	__initramfs_end = .;
-	}
-
-  .data.percpu : {
-	__per_cpu_start = .;
-	*(.data.percpu)
-	__per_cpu_end = .;
-	}
-
-  . = ALIGN(16384);
-  __init_end = .;
-  /* freed after init ends here */
-
-
-  /* Read/write sections */
-  . = ALIGN(16384);
-  /* The initial task and kernel stack */
-  .data.init_task : {
-	*(.data.init_task)
-	}
-
-  .data.page_aligned : {
-	*(.data.page_aligned)
-	}
-
-  .data.cacheline_aligned : {
-	*(.data.cacheline_aligned)
-	}
-
-  .data : {
-	*(.data .data.rel* .toc1)
-	*(.branch_lt)
-	}
-
-  .opd : {
-	*(.opd)
-	}
-
-  .got : {
-	__toc_start = .;
-	*(.got)
-	*(.toc)
-	. = ALIGN(4096);
-	_edata = .;
-	}
-
-
-  . = ALIGN(4096);
-  .bss : {
-	__bss_start = .;
-	*(.bss)
-	__bss_stop = .;
-	}
-
-  . = ALIGN(4096);
-  _end = . ;
-}
diff --git a/arch/ppc64/lib/Makefile b/arch/ppc64/lib/Makefile
deleted file mode 100644
index 0b6e967de948..000000000000
--- a/arch/ppc64/lib/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Makefile for ppc64-specific library files..
-#
-
-lib-y := checksum.o string.o strcase.o
-lib-y += copypage.o memcpy.o copyuser.o usercopy.o
-
-# Lock primitives are defined as no-ops in include/linux/spinlock.h
-# for non-SMP configs. Don't build the real versions.
-
-lib-$(CONFIG_SMP) += locks.o
-
-# e2a provides EBCDIC to ASCII conversions.
-ifdef CONFIG_PPC_ISERIES
-obj-y += e2a.o
-endif
-
-lib-$(CONFIG_DEBUG_KERNEL) += sstep.o
diff --git a/arch/ppc64/mm/Makefile b/arch/ppc64/mm/Makefile
deleted file mode 100644
index 3695d00d347f..000000000000
--- a/arch/ppc64/mm/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Makefile for the linux ppc-specific parts of the memory manager.
-#
-
-EXTRA_CFLAGS += -mno-minimal-toc
-
-obj-y := fault.o init.o imalloc.o hash_utils.o hash_low.o tlb.o \
-	slb_low.o slb.o stab.o mmap.o
-obj-$(CONFIG_NEED_MULTIPLE_NODES) += numa.o
-obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
-obj-$(CONFIG_PPC_MULTIPLATFORM) += hash_native.o
diff --git a/arch/ppc64/mm/hash_low.S b/arch/ppc64/mm/hash_low.S
deleted file mode 100644
index ee5a5d36bfa8..000000000000
--- a/arch/ppc64/mm/hash_low.S
+++ /dev/null
@@ -1,288 +0,0 @@
-/*
- * ppc64 MMU hashtable management routines
- *
- * (c) Copyright IBM Corp. 2003
- *
- * Maintained by: Benjamin Herrenschmidt
- *                <benh@kernel.crashing.org>
- *
- * This file is covered by the GNU Public Licence v2 as
- * described in the kernel's COPYING file.
- */
-
-#include <asm/processor.h>
-#include <asm/pgtable.h>
-#include <asm/mmu.h>
-#include <asm/page.h>
-#include <asm/types.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-#include <asm/cputable.h>
-
-	.text
-
-/*
- * Stackframe:
- *		
- *         +-> Back chain			(SP + 256)
- *         |   General register save area	(SP + 112)
- *         |   Parameter save area		(SP + 48)
- *         |   TOC save area			(SP + 40)
- *         |   link editor doubleword		(SP + 32)
- *         |   compiler doubleword		(SP + 24)
- *         |   LR save area			(SP + 16)
- *         |   CR save area			(SP + 8)
- * SP ---> +-- Back chain			(SP + 0)
- */
-#define STACKFRAMESIZE	256
-
-/* Save parameters offsets */
-#define STK_PARM(i)	(STACKFRAMESIZE + 48 + ((i)-3)*8)
-
-/* Save non-volatile offsets */
-#define STK_REG(i)	(112 + ((i)-14)*8)
-
-/*
- * _hash_page(unsigned long ea, unsigned long access, unsigned long vsid,
- *		pte_t *ptep, unsigned long trap, int local)
- *
- * Adds a page to the hash table. This is the non-LPAR version for now
- */
-
-_GLOBAL(__hash_page)
-	mflr	r0
-	std	r0,16(r1)
-	stdu	r1,-STACKFRAMESIZE(r1)
-	/* Save all params that we need after a function call */
-	std	r6,STK_PARM(r6)(r1)
-	std	r8,STK_PARM(r8)(r1)
-	
-	/* Add _PAGE_PRESENT to access */
-	ori	r4,r4,_PAGE_PRESENT
-
-	/* Save non-volatile registers.
-	 * r31 will hold "old PTE"
-	 * r30 is "new PTE"
-	 * r29 is "va"
-	 * r28 is a hash value
-	 * r27 is hashtab mask (maybe dynamic patched instead ?)
-	 */
-	std	r27,STK_REG(r27)(r1)
-	std	r28,STK_REG(r28)(r1)
-	std	r29,STK_REG(r29)(r1)
-	std	r30,STK_REG(r30)(r1)
-	std	r31,STK_REG(r31)(r1)
-	
-	/* Step 1:
-	 *
-	 * Check permissions, atomically mark the linux PTE busy
-	 * and hashed.
-	 */ 
-1:
-	ldarx	r31,0,r6
-	/* Check access rights (access & ~(pte_val(*ptep))) */
-	andc.	r0,r4,r31
-	bne-	htab_wrong_access
-	/* Check if PTE is busy */
-	andi.	r0,r31,_PAGE_BUSY
-	/* If so, just bail out and refault if needed. Someone else
-	 * is changing this PTE anyway and might hash it.
-	 */
-	bne-	bail_ok
-	/* Prepare new PTE value (turn access RW into DIRTY, then
-	 * add BUSY,HASHPTE and ACCESSED)
-	 */
-	rlwinm	r30,r4,32-9+7,31-7,31-7	/* _PAGE_RW -> _PAGE_DIRTY */
-	or	r30,r30,r31
-	ori	r30,r30,_PAGE_BUSY | _PAGE_ACCESSED | _PAGE_HASHPTE
-	/* Write the linux PTE atomically (setting busy) */
-	stdcx.	r30,0,r6
-	bne-	1b
-	isync
-
-	/* Step 2:
-	 *
-	 * Insert/Update the HPTE in the hash table. At this point,
-	 * r4 (access) is re-useable, we use it for the new HPTE flags
-	 */
-
-	/* Calc va and put it in r29 */
-	rldicr	r29,r5,28,63-28
-	rldicl	r3,r3,0,36
-	or	r29,r3,r29
-
-	/* Calculate hash value for primary slot and store it in r28 */
-	rldicl	r5,r5,0,25		/* vsid & 0x0000007fffffffff */
-	rldicl	r0,r3,64-12,48		/* (ea >> 12) & 0xffff */
-	xor	r28,r5,r0
-
-	/* Convert linux PTE bits into HW equivalents */
-	andi.	r3,r30,0x1fe		/* Get basic set of flags */
-	xori	r3,r3,HW_NO_EXEC	/* _PAGE_EXEC -> NOEXEC */
-	rlwinm	r0,r30,32-9+1,30,30	/* _PAGE_RW -> _PAGE_USER (r0) */
-	rlwinm	r4,r30,32-7+1,30,30	/* _PAGE_DIRTY -> _PAGE_USER (r4) */
-	and	r0,r0,r4		/* _PAGE_RW & _PAGE_DIRTY -> r0 bit 30 */
-	andc	r0,r30,r0		/* r0 = pte & ~r0 */
-	rlwimi	r3,r0,32-1,31,31	/* Insert result into PP lsb */
-
-	/* We eventually do the icache sync here (maybe inline that
-	 * code rather than call a C function...) 
-	 */
-BEGIN_FTR_SECTION
-	mr	r4,r30
-	mr	r5,r7
-	bl	.hash_page_do_lazy_icache
-END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
-
-	/* At this point, r3 contains new PP bits, save them in
-	 * place of "access" in the param area (sic)
-	 */
-	std	r3,STK_PARM(r4)(r1)
-
-	/* Get htab_hash_mask */
-	ld	r4,htab_hash_mask@got(2)
-	ld	r27,0(r4)	/* htab_hash_mask -> r27 */
-
-	/* Check if we may already be in the hashtable, in this case, we
-	 * go to out-of-line code to try to modify the HPTE
-	 */
-	andi.	r0,r31,_PAGE_HASHPTE
-	bne	htab_modify_pte
-
-htab_insert_pte:
-	/* Clear hpte bits in new pte (we also clear BUSY btw) and
-	 * add _PAGE_HASHPTE
-	 */
-	lis	r0,_PAGE_HPTEFLAGS@h
-	ori	r0,r0,_PAGE_HPTEFLAGS@l
-	andc	r30,r30,r0
-	ori	r30,r30,_PAGE_HASHPTE
-
-	/* page number in r5 */
-	rldicl	r5,r31,64-PTE_SHIFT,PTE_SHIFT
-
-	/* Calculate primary group hash */
-	and	r0,r28,r27
-	rldicr	r3,r0,3,63-3	/* r0 = (hash & mask) << 3 */
-
-	/* Call ppc_md.hpte_insert */
-	ld	r7,STK_PARM(r4)(r1)	/* Retreive new pp bits */
-	mr	r4,r29			/* Retreive va */
-	li	r6,0			/* no vflags */
-_GLOBAL(htab_call_hpte_insert1)
-	bl	.			/* Will be patched by htab_finish_init() */
-	cmpdi	0,r3,0
-	bge	htab_pte_insert_ok	/* Insertion successful */
-	cmpdi	0,r3,-2			/* Critical failure */
-	beq-	htab_pte_insert_failure
-
-	/* Now try secondary slot */
-	
-	/* page number in r5 */
-	rldicl	r5,r31,64-PTE_SHIFT,PTE_SHIFT
-
-	/* Calculate secondary group hash */
-	andc	r0,r27,r28
-	rldicr	r3,r0,3,63-3	/* r0 = (~hash & mask) << 3 */
-	
-	/* Call ppc_md.hpte_insert */
-	ld	r7,STK_PARM(r4)(r1)	/* Retreive new pp bits */
-	mr	r4,r29			/* Retreive va */
-	li	r6,HPTE_V_SECONDARY@l	/* secondary slot */
-_GLOBAL(htab_call_hpte_insert2)
-	bl	.			/* Will be patched by htab_finish_init() */
-	cmpdi	0,r3,0
-	bge+	htab_pte_insert_ok	/* Insertion successful */
-	cmpdi	0,r3,-2			/* Critical failure */
-	beq-	htab_pte_insert_failure
-
-	/* Both are full, we need to evict something */
-	mftb	r0
-	/* Pick a random group based on TB */
-	andi.	r0,r0,1
-	mr	r5,r28
-	bne	2f
-	not	r5,r5
-2:	and	r0,r5,r27
-	rldicr	r3,r0,3,63-3	/* r0 = (hash & mask) << 3 */	
-	/* Call ppc_md.hpte_remove */
-_GLOBAL(htab_call_hpte_remove)
-	bl	.			/* Will be patched by htab_finish_init() */
-
-	/* Try all again */
-	b	htab_insert_pte	
-
-bail_ok:
-	li	r3,0
-	b	bail
-
-htab_pte_insert_ok:
-	/* Insert slot number & secondary bit in PTE */
-	rldimi	r30,r3,12,63-15
-		
-	/* Write out the PTE with a normal write
-	 * (maybe add eieio may be good still ?)
-	 */
-htab_write_out_pte:
-	ld	r6,STK_PARM(r6)(r1)
-	std	r30,0(r6)
-	li	r3, 0
-bail:
-	ld	r27,STK_REG(r27)(r1)
-	ld	r28,STK_REG(r28)(r1)
-	ld	r29,STK_REG(r29)(r1)
-	ld      r30,STK_REG(r30)(r1)
-	ld      r31,STK_REG(r31)(r1)
-	addi    r1,r1,STACKFRAMESIZE
-	ld      r0,16(r1)
-	mtlr    r0
-	blr
-
-htab_modify_pte:
-	/* Keep PP bits in r4 and slot idx from the PTE around in r3 */
-	mr	r4,r3
-	rlwinm	r3,r31,32-12,29,31
-
-	/* Secondary group ? if yes, get a inverted hash value */
-	mr	r5,r28
-	andi.	r0,r31,_PAGE_SECONDARY
-	beq	1f
-	not	r5,r5
-1:
-	/* Calculate proper slot value for ppc_md.hpte_updatepp */
-	and	r0,r5,r27
-	rldicr	r0,r0,3,63-3	/* r0 = (hash & mask) << 3 */
-	add	r3,r0,r3	/* add slot idx */
-
-	/* Call ppc_md.hpte_updatepp */
-	mr	r5,r29			/* va */
-	li	r6,0			/* large is 0 */
-	ld	r7,STK_PARM(r8)(r1)	/* get "local" param */
-_GLOBAL(htab_call_hpte_updatepp)
-	bl	.			/* Will be patched by htab_finish_init() */
-
-	/* if we failed because typically the HPTE wasn't really here
-	 * we try an insertion. 
-	 */
-	cmpdi	0,r3,-1
-	beq-	htab_insert_pte
-
-	/* Clear the BUSY bit and Write out the PTE */
-	li	r0,_PAGE_BUSY
-	andc	r30,r30,r0
-	b	htab_write_out_pte
-
-htab_wrong_access:
-	/* Bail out clearing reservation */
-	stdcx.	r31,0,r6
-	li	r3,1
-	b	bail
-
-htab_pte_insert_failure:
-	/* Bail out restoring old PTE */
-	ld	r6,STK_PARM(r6)(r1)
-	std	r31,0(r6)
-	li	r3,-1
-	b	bail
-
-
diff --git a/arch/ppc64/mm/hash_utils.c b/arch/ppc64/mm/hash_utils.c
deleted file mode 100644
index 09475c8edf7c..000000000000
--- a/arch/ppc64/mm/hash_utils.c
+++ /dev/null
@@ -1,438 +0,0 @@
-/*
- * PowerPC64 port by Mike Corrigan and Dave Engebretsen
- *   {mikejc|engebret}@us.ibm.com
- *
- *    Copyright (c) 2000 Mike Corrigan <mikejc@us.ibm.com>
- *
- * SMP scalability work:
- *    Copyright (C) 2001 Anton Blanchard <anton@au.ibm.com>, IBM
- * 
- *    Module name: htab.c
- *
- *    Description:
- *      PowerPC Hashed Page Table functions
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#undef DEBUG
-
-#include <linux/config.h>
-#include <linux/spinlock.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include <linux/stat.h>
-#include <linux/sysctl.h>
-#include <linux/ctype.h>
-#include <linux/cache.h>
-#include <linux/init.h>
-#include <linux/signal.h>
-
-#include <asm/ppcdebug.h>
-#include <asm/processor.h>
-#include <asm/pgtable.h>
-#include <asm/mmu.h>
-#include <asm/mmu_context.h>
-#include <asm/page.h>
-#include <asm/types.h>
-#include <asm/system.h>
-#include <asm/uaccess.h>
-#include <asm/machdep.h>
-#include <asm/lmb.h>
-#include <asm/abs_addr.h>
-#include <asm/tlbflush.h>
-#include <asm/io.h>
-#include <asm/eeh.h>
-#include <asm/tlb.h>
-#include <asm/cacheflush.h>
-#include <asm/cputable.h>
-#include <asm/abs_addr.h>
-#include <asm/sections.h>
-
-#ifdef DEBUG
-#define DBG(fmt...) udbg_printf(fmt)
-#else
-#define DBG(fmt...)
-#endif
-
-/*
- * Note:  pte   --> Linux PTE
- *        HPTE  --> PowerPC Hashed Page Table Entry
- *
- * Execution context:
- *   htab_initialize is called with the MMU off (of course), but
- *   the kernel has been copied down to zero so it can directly
- *   reference global data.  At this point it is very difficult
- *   to print debug info.
- *
- */
-
-#ifdef CONFIG_U3_DART
-extern unsigned long dart_tablebase;
-#endif /* CONFIG_U3_DART */
-
-hpte_t *htab_address;
-unsigned long htab_hash_mask;
-
-extern unsigned long _SDR1;
-
-#define KB (1024)
-#define MB (1024*KB)
-
-static inline void loop_forever(void)
-{
-	volatile unsigned long x = 1;
-	for(;x;x|=1)
-		;
-}
-
-#ifdef CONFIG_PPC_MULTIPLATFORM
-static inline void create_pte_mapping(unsigned long start, unsigned long end,
-				      unsigned long mode, int large)
-{
-	unsigned long addr;
-	unsigned int step;
-	unsigned long tmp_mode;
-	unsigned long vflags;
-
-	if (large) {
-		step = 16*MB;
-		vflags = HPTE_V_BOLTED | HPTE_V_LARGE;
-	} else {
-		step = 4*KB;
-		vflags = HPTE_V_BOLTED;
-	}
-
-	for (addr = start; addr < end; addr += step) {
-		unsigned long vpn, hash, hpteg;
-		unsigned long vsid = get_kernel_vsid(addr);
-		unsigned long va = (vsid << 28) | (addr & 0xfffffff);
-		int ret;
-
-		if (large)
-			vpn = va >> HPAGE_SHIFT;
-		else
-			vpn = va >> PAGE_SHIFT;
-
-
-		tmp_mode = mode;
-		
-		/* Make non-kernel text non-executable */
-		if (!in_kernel_text(addr))
-			tmp_mode = mode | HW_NO_EXEC;
-
-		hash = hpt_hash(vpn, large);
-
-		hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);
-
-#ifdef CONFIG_PPC_PSERIES
-		if (systemcfg->platform & PLATFORM_LPAR)
-			ret = pSeries_lpar_hpte_insert(hpteg, va,
-				virt_to_abs(addr) >> PAGE_SHIFT,
-				vflags, tmp_mode);
-		else
-#endif /* CONFIG_PPC_PSERIES */
-			ret = native_hpte_insert(hpteg, va,
-				virt_to_abs(addr) >> PAGE_SHIFT,
-				vflags, tmp_mode);
-
-		if (ret == -1) {
-			ppc64_terminate_msg(0x20, "create_pte_mapping");
-			loop_forever();
-		}
-	}
-}
-
-void __init htab_initialize(void)
-{
-	unsigned long table, htab_size_bytes;
-	unsigned long pteg_count;
-	unsigned long mode_rw;
-	int i, use_largepages = 0;
-	unsigned long base = 0, size = 0;
-	extern unsigned long tce_alloc_start, tce_alloc_end;
-
-	DBG(" -> htab_initialize()\n");
-
-	/*
-	 * Calculate the required size of the htab.  We want the number of
-	 * PTEGs to equal one half the number of real pages.
-	 */ 
-	htab_size_bytes = 1UL << ppc64_pft_size;
-	pteg_count = htab_size_bytes >> 7;
-
-	/* For debug, make the HTAB 1/8 as big as it normally would be. */
-	ifppcdebug(PPCDBG_HTABSIZE) {
-		pteg_count >>= 3;
-		htab_size_bytes = pteg_count << 7;
-	}
-
-	htab_hash_mask = pteg_count - 1;
-
-	if (systemcfg->platform & PLATFORM_LPAR) {
-		/* Using a hypervisor which owns the htab */
-		htab_address = NULL;
-		_SDR1 = 0; 
-	} else {
-		/* Find storage for the HPT.  Must be contiguous in
-		 * the absolute address space.
-		 */
-		table = lmb_alloc(htab_size_bytes, htab_size_bytes);
-
-		DBG("Hash table allocated at %lx, size: %lx\n", table,
-		    htab_size_bytes);
-
-		if ( !table ) {
-			ppc64_terminate_msg(0x20, "hpt space");
-			loop_forever();
-		}
-		htab_address = abs_to_virt(table);
-
-		/* htab absolute addr + encoded htabsize */
-		_SDR1 = table + __ilog2(pteg_count) - 11;
-
-		/* Initialize the HPT with no entries */
-		memset((void *)table, 0, htab_size_bytes);
-	}
-
-	mode_rw = _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX;
-
-	/* On U3 based machines, we need to reserve the DART area and
-	 * _NOT_ map it to avoid cache paradoxes as it's remapped non
-	 * cacheable later on
-	 */
-	if (cpu_has_feature(CPU_FTR_16M_PAGE))
-		use_largepages = 1;
-
-	/* create bolted the linear mapping in the hash table */
-	for (i=0; i < lmb.memory.cnt; i++) {
-		base = lmb.memory.region[i].base + KERNELBASE;
-		size = lmb.memory.region[i].size;
-
-		DBG("creating mapping for region: %lx : %lx\n", base, size);
-
-#ifdef CONFIG_U3_DART
-		/* Do not map the DART space. Fortunately, it will be aligned
-		 * in such a way that it will not cross two lmb regions and will
-		 * fit within a single 16Mb page.
-		 * The DART space is assumed to be a full 16Mb region even if we
-		 * only use 2Mb of that space. We will use more of it later for
-		 * AGP GART. We have to use a full 16Mb large page.
-		 */
-		DBG("DART base: %lx\n", dart_tablebase);
-
-		if (dart_tablebase != 0 && dart_tablebase >= base
-		    && dart_tablebase < (base + size)) {
-			if (base != dart_tablebase)
-				create_pte_mapping(base, dart_tablebase, mode_rw,
-						   use_largepages);
-			if ((base + size) > (dart_tablebase + 16*MB))
-				create_pte_mapping(dart_tablebase + 16*MB, base + size,
-						   mode_rw, use_largepages);
-			continue;
-		}
-#endif /* CONFIG_U3_DART */
-		create_pte_mapping(base, base + size, mode_rw, use_largepages);
-	}
-
-	/*
-	 * If we have a memory_limit and we've allocated TCEs then we need to
-	 * explicitly map the TCE area at the top of RAM. We also cope with the
-	 * case that the TCEs start below memory_limit.
-	 * tce_alloc_start/end are 16MB aligned so the mapping should work
-	 * for either 4K or 16MB pages.
-	 */
-	if (tce_alloc_start) {
-		tce_alloc_start += KERNELBASE;
-		tce_alloc_end += KERNELBASE;
-
-		if (base + size >= tce_alloc_start)
-			tce_alloc_start = base + size + 1;
-
-		create_pte_mapping(tce_alloc_start, tce_alloc_end,
-			mode_rw, use_largepages);
-	}
-
-	DBG(" <- htab_initialize()\n");
-}
-#undef KB
-#undef MB
-#endif /* CONFIG_PPC_MULTIPLATFORM */
-
-/*
- * Called by asm hashtable.S for doing lazy icache flush
- */
-unsigned int hash_page_do_lazy_icache(unsigned int pp, pte_t pte, int trap)
-{
-	struct page *page;
-
-	if (!pfn_valid(pte_pfn(pte)))
-		return pp;
-
-	page = pte_page(pte);
-
-	/* page is dirty */
-	if (!test_bit(PG_arch_1, &page->flags) && !PageReserved(page)) {
-		if (trap == 0x400) {
-			__flush_dcache_icache(page_address(page));
-			set_bit(PG_arch_1, &page->flags);
-		} else
-			pp |= HW_NO_EXEC;
-	}
-	return pp;
-}
-
-/* Result code is:
- *  0 - handled
- *  1 - normal page fault
- * -1 - critical hash insertion error
- */
-int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
-{
-	void *pgdir;
-	unsigned long vsid;
-	struct mm_struct *mm;
-	pte_t *ptep;
-	int ret;
-	int user_region = 0;
-	int local = 0;
-	cpumask_t tmp;
-
-	if ((ea & ~REGION_MASK) >= PGTABLE_RANGE)
-		return 1;
-
- 	switch (REGION_ID(ea)) {
-	case USER_REGION_ID:
-		user_region = 1;
-		mm = current->mm;
-		if (! mm)
-			return 1;
-
-		vsid = get_vsid(mm->context.id, ea);
-		break;
-	case VMALLOC_REGION_ID:
-		mm = &init_mm;
-		vsid = get_kernel_vsid(ea);
-		break;
-#if 0
-	case KERNEL_REGION_ID:
-		/*
-		 * Should never get here - entire 0xC0... region is bolted.
-		 * Send the problem up to do_page_fault 
-		 */
-#endif
-	default:
-		/* Not a valid range
-		 * Send the problem up to do_page_fault 
-		 */
-		return 1;
-		break;
-	}
-
-	pgdir = mm->pgd;
-
-	if (pgdir == NULL)
-		return 1;
-
-	tmp = cpumask_of_cpu(smp_processor_id());
-	if (user_region && cpus_equal(mm->cpu_vm_mask, tmp))
-		local = 1;
-
-	/* Is this a huge page ? */
-	if (unlikely(in_hugepage_area(mm->context, ea)))
-		ret = hash_huge_page(mm, access, ea, vsid, local);
-	else {
-		ptep = find_linux_pte(pgdir, ea);
-		if (ptep == NULL)
-			return 1;
-		ret = __hash_page(ea, access, vsid, ptep, trap, local);
-	}
-
-	return ret;
-}
-
-void flush_hash_page(unsigned long context, unsigned long ea, pte_t pte,
-		     int local)
-{
-	unsigned long vsid, vpn, va, hash, secondary, slot;
-	unsigned long huge = pte_huge(pte);
-
-	if (ea < KERNELBASE)
-		vsid = get_vsid(context, ea);
-	else
-		vsid = get_kernel_vsid(ea);
-
-	va = (vsid << 28) | (ea & 0x0fffffff);
-	if (huge)
-		vpn = va >> HPAGE_SHIFT;
-	else
-		vpn = va >> PAGE_SHIFT;
-	hash = hpt_hash(vpn, huge);
-	secondary = (pte_val(pte) & _PAGE_SECONDARY) >> 15;
-	if (secondary)
-		hash = ~hash;
-	slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
-	slot += (pte_val(pte) & _PAGE_GROUP_IX) >> 12;
-
-	ppc_md.hpte_invalidate(slot, va, huge, local);
-}
-
-void flush_hash_range(unsigned long context, unsigned long number, int local)
-{
-	if (ppc_md.flush_hash_range) {
-		ppc_md.flush_hash_range(context, number, local);
-	} else {
-		int i;
-		struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch);
-
-		for (i = 0; i < number; i++)
-			flush_hash_page(context, batch->addr[i], batch->pte[i],
-					local);
-	}
-}
-
-static inline void make_bl(unsigned int *insn_addr, void *func)
-{
-	unsigned long funcp = *((unsigned long *)func);
-	int offset = funcp - (unsigned long)insn_addr;
-
-	*insn_addr = (unsigned int)(0x48000001 | (offset & 0x03fffffc));
-	flush_icache_range((unsigned long)insn_addr, 4+
-			   (unsigned long)insn_addr);
-}
-
-/*
- * low_hash_fault is called when we the low level hash code failed
- * to instert a PTE due to an hypervisor error
- */
-void low_hash_fault(struct pt_regs *regs, unsigned long address)
-{
-	if (user_mode(regs)) {
-		siginfo_t info;
-
-		info.si_signo = SIGBUS;
-		info.si_errno = 0;
-		info.si_code = BUS_ADRERR;
-		info.si_addr = (void __user *)address;
-		force_sig_info(SIGBUS, &info, current);
-		return;
-	}
-	bad_page_fault(regs, address, SIGBUS);
-}
-
-void __init htab_finish_init(void)
-{
-	extern unsigned int *htab_call_hpte_insert1;
-	extern unsigned int *htab_call_hpte_insert2;
-	extern unsigned int *htab_call_hpte_remove;
-	extern unsigned int *htab_call_hpte_updatepp;
-
-	make_bl(htab_call_hpte_insert1, ppc_md.hpte_insert);
-	make_bl(htab_call_hpte_insert2, ppc_md.hpte_insert);
-	make_bl(htab_call_hpte_remove, ppc_md.hpte_remove);
-	make_bl(htab_call_hpte_updatepp, ppc_md.hpte_updatepp);
-}
diff --git a/arch/ppc64/mm/init.c b/arch/ppc64/mm/init.c
deleted file mode 100644
index c2157c9c3acb..000000000000
--- a/arch/ppc64/mm/init.c
+++ /dev/null
@@ -1,870 +0,0 @@
-/*
- *  PowerPC version 
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  Dave Engebretsen <engebret@us.ibm.com>
- *      Rework for PPC64 port.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/config.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/stddef.h>
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/bootmem.h>
-#include <linux/highmem.h>
-#include <linux/idr.h>
-#include <linux/nodemask.h>
-#include <linux/module.h>
-
-#include <asm/pgalloc.h>
-#include <asm/page.h>
-#include <asm/prom.h>
-#include <asm/lmb.h>
-#include <asm/rtas.h>
-#include <asm/io.h>
-#include <asm/mmu_context.h>
-#include <asm/pgtable.h>
-#include <asm/mmu.h>
-#include <asm/uaccess.h>
-#include <asm/smp.h>
-#include <asm/machdep.h>
-#include <asm/tlb.h>
-#include <asm/eeh.h>
-#include <asm/processor.h>
-#include <asm/mmzone.h>
-#include <asm/cputable.h>
-#include <asm/ppcdebug.h>
-#include <asm/sections.h>
-#include <asm/system.h>
-#include <asm/iommu.h>
-#include <asm/abs_addr.h>
-#include <asm/vdso.h>
-#include <asm/imalloc.h>
-
-#if PGTABLE_RANGE > USER_VSID_RANGE
-#warning Limited user VSID range means pagetable space is wasted
-#endif
-
-#if (TASK_SIZE_USER64 < PGTABLE_RANGE) && (TASK_SIZE_USER64 < USER_VSID_RANGE)
-#warning TASK_SIZE is smaller than it needs to be.
-#endif
-
-int mem_init_done;
-unsigned long ioremap_bot = IMALLOC_BASE;
-static unsigned long phbs_io_bot = PHBS_IO_BASE;
-
-extern pgd_t swapper_pg_dir[];
-extern struct task_struct *current_set[NR_CPUS];
-
-unsigned long klimit = (unsigned long)_end;
-
-unsigned long _SDR1=0;
-unsigned long _ASR=0;
-
-/* max amount of RAM to use */
-unsigned long __max_memory;
-
-/* info on what we think the IO hole is */
-unsigned long 	io_hole_start;
-unsigned long	io_hole_size;
-
-void show_mem(void)
-{
-	unsigned long total = 0, reserved = 0;
-	unsigned long shared = 0, cached = 0;
-	struct page *page;
-	pg_data_t *pgdat;
-	unsigned long i;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
-	for_each_pgdat(pgdat) {
-		for (i = 0; i < pgdat->node_spanned_pages; i++) {
-			page = pgdat_page_nr(pgdat, i);
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (page_count(page))
-				shared += page_count(page) - 1;
-		}
-	}
-	printk("%ld pages of RAM\n", total);
-	printk("%ld reserved pages\n", reserved);
-	printk("%ld pages shared\n", shared);
-	printk("%ld pages swap cached\n", cached);
-}
-
-#ifdef CONFIG_PPC_ISERIES
-
-void __iomem *ioremap(unsigned long addr, unsigned long size)
-{
-	return (void __iomem *)addr;
-}
-
-extern void __iomem *__ioremap(unsigned long addr, unsigned long size,
-		       unsigned long flags)
-{
-	return (void __iomem *)addr;
-}
-
-void iounmap(volatile void __iomem *addr)
-{
-	return;
-}
-
-#else
-
-/*
- * map_io_page currently only called by __ioremap
- * map_io_page adds an entry to the ioremap page table
- * and adds an entry to the HPT, possibly bolting it
- */
-static int map_io_page(unsigned long ea, unsigned long pa, int flags)
-{
-	pgd_t *pgdp;
-	pud_t *pudp;
-	pmd_t *pmdp;
-	pte_t *ptep;
-	unsigned long vsid;
-
-	if (mem_init_done) {
-		spin_lock(&init_mm.page_table_lock);
-		pgdp = pgd_offset_k(ea);
-		pudp = pud_alloc(&init_mm, pgdp, ea);
-		if (!pudp)
-			return -ENOMEM;
-		pmdp = pmd_alloc(&init_mm, pudp, ea);
-		if (!pmdp)
-			return -ENOMEM;
-		ptep = pte_alloc_kernel(&init_mm, pmdp, ea);
-		if (!ptep)
-			return -ENOMEM;
-		set_pte_at(&init_mm, ea, ptep, pfn_pte(pa >> PAGE_SHIFT,
-							  __pgprot(flags)));
-		spin_unlock(&init_mm.page_table_lock);
-	} else {
-		unsigned long va, vpn, hash, hpteg;
-
-		/*
-		 * If the mm subsystem is not fully up, we cannot create a
-		 * linux page table entry for this mapping.  Simply bolt an
-		 * entry in the hardware page table.
-		 */
-		vsid = get_kernel_vsid(ea);
-		va = (vsid << 28) | (ea & 0xFFFFFFF);
-		vpn = va >> PAGE_SHIFT;
-
-		hash = hpt_hash(vpn, 0);
-
-		hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);
-
-		/* Panic if a pte grpup is full */
-		if (ppc_md.hpte_insert(hpteg, va, pa >> PAGE_SHIFT,
-				       HPTE_V_BOLTED,
-				       _PAGE_NO_CACHE|_PAGE_GUARDED|PP_RWXX)
-		    == -1) {
-			panic("map_io_page: could not insert mapping");
-		}
-	}
-	return 0;
-}
-
-
-static void __iomem * __ioremap_com(unsigned long addr, unsigned long pa,
-			    unsigned long ea, unsigned long size,
-			    unsigned long flags)
-{
-	unsigned long i;
-
-	if ((flags & _PAGE_PRESENT) == 0)
-		flags |= pgprot_val(PAGE_KERNEL);
-
-	for (i = 0; i < size; i += PAGE_SIZE)
-		if (map_io_page(ea+i, pa+i, flags))
-			return NULL;
-
-	return (void __iomem *) (ea + (addr & ~PAGE_MASK));
-}
-
-
-void __iomem *
-ioremap(unsigned long addr, unsigned long size)
-{
-	return __ioremap(addr, size, _PAGE_NO_CACHE | _PAGE_GUARDED);
-}
-
-void __iomem * __ioremap(unsigned long addr, unsigned long size,
-			 unsigned long flags)
-{
-	unsigned long pa, ea;
-	void __iomem *ret;
-
-	/*
-	 * Choose an address to map it to.
-	 * Once the imalloc system is running, we use it.
-	 * Before that, we map using addresses going
-	 * up from ioremap_bot.  imalloc will use
-	 * the addresses from ioremap_bot through
-	 * IMALLOC_END
-	 * 
-	 */
-	pa = addr & PAGE_MASK;
-	size = PAGE_ALIGN(addr + size) - pa;
-
-	if (size == 0)
-		return NULL;
-
-	if (mem_init_done) {
-		struct vm_struct *area;
-		area = im_get_free_area(size);
-		if (area == NULL)
-			return NULL;
-		ea = (unsigned long)(area->addr);
-		ret = __ioremap_com(addr, pa, ea, size, flags);
-		if (!ret)
-			im_free(area->addr);
-	} else {
-		ea = ioremap_bot;
-		ret = __ioremap_com(addr, pa, ea, size, flags);
-		if (ret)
-			ioremap_bot += size;
-	}
-	return ret;
-}
-
-#define IS_PAGE_ALIGNED(_val) ((_val) == ((_val) & PAGE_MASK))
-
-int __ioremap_explicit(unsigned long pa, unsigned long ea,
-		       unsigned long size, unsigned long flags)
-{
-	struct vm_struct *area;
-	void __iomem *ret;
-	
-	/* For now, require page-aligned values for pa, ea, and size */
-	if (!IS_PAGE_ALIGNED(pa) || !IS_PAGE_ALIGNED(ea) ||
-	    !IS_PAGE_ALIGNED(size)) {
-		printk(KERN_ERR	"unaligned value in %s\n", __FUNCTION__);
-		return 1;
-	}
-	
-	if (!mem_init_done) {
-		/* Two things to consider in this case:
-		 * 1) No records will be kept (imalloc, etc) that the region
-		 *    has been remapped
-		 * 2) It won't be easy to iounmap() the region later (because
-		 *    of 1)
-		 */
-		;
-	} else {
-		area = im_get_area(ea, size,
-			IM_REGION_UNUSED|IM_REGION_SUBSET|IM_REGION_EXISTS);
-		if (area == NULL) {
-			/* Expected when PHB-dlpar is in play */
-			return 1;
-		}
-		if (ea != (unsigned long) area->addr) {
-			printk(KERN_ERR "unexpected addr return from "
-			       "im_get_area\n");
-			return 1;
-		}
-	}
-	
-	ret = __ioremap_com(pa, pa, ea, size, flags);
-	if (ret == NULL) {
-		printk(KERN_ERR "ioremap_explicit() allocation failure !\n");
-		return 1;
-	}
-	if (ret != (void *) ea) {
-		printk(KERN_ERR "__ioremap_com() returned unexpected addr\n");
-		return 1;
-	}
-
-	return 0;
-}
-
-/*  
- * Unmap an IO region and remove it from imalloc'd list.
- * Access to IO memory should be serialized by driver.
- * This code is modeled after vmalloc code - unmap_vm_area()
- *
- * XXX	what about calls before mem_init_done (ie python_countermeasures())
- */
-void iounmap(volatile void __iomem *token)
-{
-	void *addr;
-
-	if (!mem_init_done)
-		return;
-	
-	addr = (void *) ((unsigned long __force) token & PAGE_MASK);
-
-	im_free(addr);
-}
-
-static int iounmap_subset_regions(unsigned long addr, unsigned long size)
-{
-	struct vm_struct *area;
-
-	/* Check whether subsets of this region exist */
-	area = im_get_area(addr, size, IM_REGION_SUPERSET);
-	if (area == NULL)
-		return 1;
-
-	while (area) {
-		iounmap((void __iomem *) area->addr);
-		area = im_get_area(addr, size,
-				IM_REGION_SUPERSET);
-	}
-
-	return 0;
-}
-
-int iounmap_explicit(volatile void __iomem *start, unsigned long size)
-{
-	struct vm_struct *area;
-	unsigned long addr;
-	int rc;
-	
-	addr = (unsigned long __force) start & PAGE_MASK;
-
-	/* Verify that the region either exists or is a subset of an existing
-	 * region.  In the latter case, split the parent region to create 
-	 * the exact region 
-	 */
-	area = im_get_area(addr, size, 
-			    IM_REGION_EXISTS | IM_REGION_SUBSET);
-	if (area == NULL) {
-		/* Determine whether subset regions exist.  If so, unmap */
-		rc = iounmap_subset_regions(addr, size);
-		if (rc) {
-			printk(KERN_ERR
-			       "%s() cannot unmap nonexistent range 0x%lx\n",
- 				__FUNCTION__, addr);
-			return 1;
-		}
-	} else {
-		iounmap((void __iomem *) area->addr);
-	}
-	/*
-	 * FIXME! This can't be right:
-	iounmap(area->addr);
-	 * Maybe it should be "iounmap(area);"
-	 */
-	return 0;
-}
-
-#endif
-
-EXPORT_SYMBOL(ioremap);
-EXPORT_SYMBOL(__ioremap);
-EXPORT_SYMBOL(iounmap);
-
-void free_initmem(void)
-{
-	unsigned long addr;
-
-	addr = (unsigned long)__init_begin;
-	for (; addr < (unsigned long)__init_end; addr += PAGE_SIZE) {
-		memset((void *)addr, 0xcc, PAGE_SIZE);
-		ClearPageReserved(virt_to_page(addr));
-		set_page_count(virt_to_page(addr), 1);
-		free_page(addr);
-		totalram_pages++;
-	}
-	printk ("Freeing unused kernel memory: %luk freed\n",
-		((unsigned long)__init_end - (unsigned long)__init_begin) >> 10);
-}
-
-#ifdef CONFIG_BLK_DEV_INITRD
-void free_initrd_mem(unsigned long start, unsigned long end)
-{
-	if (start < end)
-		printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
-	for (; start < end; start += PAGE_SIZE) {
-		ClearPageReserved(virt_to_page(start));
-		set_page_count(virt_to_page(start), 1);
-		free_page(start);
-		totalram_pages++;
-	}
-}
-#endif
-
-static DEFINE_SPINLOCK(mmu_context_lock);
-static DEFINE_IDR(mmu_context_idr);
-
-int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
-{
-	int index;
-	int err;
-
-again:
-	if (!idr_pre_get(&mmu_context_idr, GFP_KERNEL))
-		return -ENOMEM;
-
-	spin_lock(&mmu_context_lock);
-	err = idr_get_new_above(&mmu_context_idr, NULL, 1, &index);
-	spin_unlock(&mmu_context_lock);
-
-	if (err == -EAGAIN)
-		goto again;
-	else if (err)
-		return err;
-
-	if (index > MAX_CONTEXT) {
-		idr_remove(&mmu_context_idr, index);
-		return -ENOMEM;
-	}
-
-	mm->context.id = index;
-
-	return 0;
-}
-
-void destroy_context(struct mm_struct *mm)
-{
-	spin_lock(&mmu_context_lock);
-	idr_remove(&mmu_context_idr, mm->context.id);
-	spin_unlock(&mmu_context_lock);
-
-	mm->context.id = NO_CONTEXT;
-}
-
-/*
- * Do very early mm setup.
- */
-void __init mm_init_ppc64(void)
-{
-#ifndef CONFIG_PPC_ISERIES
-	unsigned long i;
-#endif
-
-	ppc64_boot_msg(0x100, "MM Init");
-
-	/* This is the story of the IO hole... please, keep seated,
-	 * unfortunately, we are out of oxygen masks at the moment.
-	 * So we need some rough way to tell where your big IO hole
-	 * is. On pmac, it's between 2G and 4G, on POWER3, it's around
-	 * that area as well, on POWER4 we don't have one, etc...
-	 * We need that as a "hint" when sizing the TCE table on POWER3
-	 * So far, the simplest way that seem work well enough for us it
-	 * to just assume that the first discontinuity in our physical
-	 * RAM layout is the IO hole. That may not be correct in the future
-	 * (and isn't on iSeries but then we don't care ;)
-	 */
-
-#ifndef CONFIG_PPC_ISERIES
-	for (i = 1; i < lmb.memory.cnt; i++) {
-		unsigned long base, prevbase, prevsize;
-
-		prevbase = lmb.memory.region[i-1].base;
-		prevsize = lmb.memory.region[i-1].size;
-		base = lmb.memory.region[i].base;
-		if (base > (prevbase + prevsize)) {
-			io_hole_start = prevbase + prevsize;
-			io_hole_size = base  - (prevbase + prevsize);
-			break;
-		}
-	}
-#endif /* CONFIG_PPC_ISERIES */
-	if (io_hole_start)
-		printk("IO Hole assumed to be %lx -> %lx\n",
-		       io_hole_start, io_hole_start + io_hole_size - 1);
-
-	ppc64_boot_msg(0x100, "MM Init Done");
-}
-
-/*
- * This is called by /dev/mem to know if a given address has to
- * be mapped non-cacheable or not
- */
-int page_is_ram(unsigned long pfn)
-{
-	int i;
-	unsigned long paddr = (pfn << PAGE_SHIFT);
-
-	for (i=0; i < lmb.memory.cnt; i++) {
-		unsigned long base;
-
-		base = lmb.memory.region[i].base;
-
-		if ((paddr >= base) &&
-			(paddr < (base + lmb.memory.region[i].size))) {
-			return 1;
-		}
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(page_is_ram);
-
-/*
- * Initialize the bootmem system and give it all the memory we
- * have available.
- */
-#ifndef CONFIG_NEED_MULTIPLE_NODES
-void __init do_init_bootmem(void)
-{
-	unsigned long i;
-	unsigned long start, bootmap_pages;
-	unsigned long total_pages = lmb_end_of_DRAM() >> PAGE_SHIFT;
-	int boot_mapsize;
-
-	/*
-	 * Find an area to use for the bootmem bitmap.  Calculate the size of
-	 * bitmap required as (Total Memory) / PAGE_SIZE / BITS_PER_BYTE.
-	 * Add 1 additional page in case the address isn't page-aligned.
-	 */
-	bootmap_pages = bootmem_bootmap_pages(total_pages);
-
-	start = lmb_alloc(bootmap_pages<<PAGE_SHIFT, PAGE_SIZE);
-	BUG_ON(!start);
-
-	boot_mapsize = init_bootmem(start >> PAGE_SHIFT, total_pages);
-
-	max_pfn = max_low_pfn;
-
-	/* Add all physical memory to the bootmem map, mark each area
-	 * present.
-	 */
-	for (i=0; i < lmb.memory.cnt; i++)
-		free_bootmem(lmb.memory.region[i].base,
-			     lmb_size_bytes(&lmb.memory, i));
-
-	/* reserve the sections we're already using */
-	for (i=0; i < lmb.reserved.cnt; i++)
-		reserve_bootmem(lmb.reserved.region[i].base,
-				lmb_size_bytes(&lmb.reserved, i));
-
-	for (i=0; i < lmb.memory.cnt; i++)
-		memory_present(0, lmb_start_pfn(&lmb.memory, i),
-			       lmb_end_pfn(&lmb.memory, i));
-}
-
-/*
- * paging_init() sets up the page tables - in fact we've already done this.
- */
-void __init paging_init(void)
-{
-	unsigned long zones_size[MAX_NR_ZONES];
-	unsigned long zholes_size[MAX_NR_ZONES];
-	unsigned long total_ram = lmb_phys_mem_size();
-	unsigned long top_of_ram = lmb_end_of_DRAM();
-
-	printk(KERN_INFO "Top of RAM: 0x%lx, Total RAM: 0x%lx\n",
-	       top_of_ram, total_ram);
-	printk(KERN_INFO "Memory hole size: %ldMB\n",
-	       (top_of_ram - total_ram) >> 20);
-	/*
-	 * All pages are DMA-able so we put them all in the DMA zone.
-	 */
-	memset(zones_size, 0, sizeof(zones_size));
-	memset(zholes_size, 0, sizeof(zholes_size));
-
-	zones_size[ZONE_DMA] = top_of_ram >> PAGE_SHIFT;
-	zholes_size[ZONE_DMA] = (top_of_ram - total_ram) >> PAGE_SHIFT;
-
-	free_area_init_node(0, NODE_DATA(0), zones_size,
-			    __pa(PAGE_OFFSET) >> PAGE_SHIFT, zholes_size);
-}
-#endif /* ! CONFIG_NEED_MULTIPLE_NODES */
-
-static struct kcore_list kcore_vmem;
-
-static int __init setup_kcore(void)
-{
-	int i;
-
-	for (i=0; i < lmb.memory.cnt; i++) {
-		unsigned long base, size;
-		struct kcore_list *kcore_mem;
-
-		base = lmb.memory.region[i].base;
-		size = lmb.memory.region[i].size;
-
-		/* GFP_ATOMIC to avoid might_sleep warnings during boot */
-		kcore_mem = kmalloc(sizeof(struct kcore_list), GFP_ATOMIC);
-		if (!kcore_mem)
-			panic("mem_init: kmalloc failed\n");
-
-		kclist_add(kcore_mem, __va(base), size);
-	}
-
-	kclist_add(&kcore_vmem, (void *)VMALLOC_START, VMALLOC_END-VMALLOC_START);
-
-	return 0;
-}
-module_init(setup_kcore);
-
-void __init mem_init(void)
-{
-#ifdef CONFIG_NEED_MULTIPLE_NODES
-	int nid;
-#endif
-	pg_data_t *pgdat;
-	unsigned long i;
-	struct page *page;
-	unsigned long reservedpages = 0, codesize, initsize, datasize, bsssize;
-
-	num_physpages = max_low_pfn;	/* RAM is assumed contiguous */
-	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
-
-#ifdef CONFIG_NEED_MULTIPLE_NODES
-        for_each_online_node(nid) {
-		if (NODE_DATA(nid)->node_spanned_pages != 0) {
-			printk("freeing bootmem node %x\n", nid);
-			totalram_pages +=
-				free_all_bootmem_node(NODE_DATA(nid));
-		}
-	}
-#else
-	max_mapnr = num_physpages;
-	totalram_pages += free_all_bootmem();
-#endif
-
-	for_each_pgdat(pgdat) {
-		for (i = 0; i < pgdat->node_spanned_pages; i++) {
-			page = pgdat_page_nr(pgdat, i);
-			if (PageReserved(page))
-				reservedpages++;
-		}
-	}
-
-	codesize = (unsigned long)&_etext - (unsigned long)&_stext;
-	initsize = (unsigned long)&__init_end - (unsigned long)&__init_begin;
-	datasize = (unsigned long)&_edata - (unsigned long)&__init_end;
-	bsssize = (unsigned long)&__bss_stop - (unsigned long)&__bss_start;
-
-	printk(KERN_INFO "Memory: %luk/%luk available (%luk kernel code, "
-	       "%luk reserved, %luk data, %luk bss, %luk init)\n",
-		(unsigned long)nr_free_pages() << (PAGE_SHIFT-10),
-		num_physpages << (PAGE_SHIFT-10),
-		codesize >> 10,
-		reservedpages << (PAGE_SHIFT-10),
-		datasize >> 10,
-		bsssize >> 10,
-		initsize >> 10);
-
-	mem_init_done = 1;
-
-	/* Initialize the vDSO */
-	vdso_init();
-}
-
-/*
- * This is called when a page has been modified by the kernel.
- * It just marks the page as not i-cache clean.  We do the i-cache
- * flush later when the page is given to a user process, if necessary.
- */
-void flush_dcache_page(struct page *page)
-{
-	if (cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
-		return;
-	/* avoid an atomic op if possible */
-	if (test_bit(PG_arch_1, &page->flags))
-		clear_bit(PG_arch_1, &page->flags);
-}
-EXPORT_SYMBOL(flush_dcache_page);
-
-void clear_user_page(void *page, unsigned long vaddr, struct page *pg)
-{
-	clear_page(page);
-
-	if (cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
-		return;
-	/*
-	 * We shouldnt have to do this, but some versions of glibc
-	 * require it (ld.so assumes zero filled pages are icache clean)
-	 * - Anton
-	 */
-
-	/* avoid an atomic op if possible */
-	if (test_bit(PG_arch_1, &pg->flags))
-		clear_bit(PG_arch_1, &pg->flags);
-}
-EXPORT_SYMBOL(clear_user_page);
-
-void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
-		    struct page *pg)
-{
-	copy_page(vto, vfrom);
-
-	/*
-	 * We should be able to use the following optimisation, however
-	 * there are two problems.
-	 * Firstly a bug in some versions of binutils meant PLT sections
-	 * were not marked executable.
-	 * Secondly the first word in the GOT section is blrl, used
-	 * to establish the GOT address. Until recently the GOT was
-	 * not marked executable.
-	 * - Anton
-	 */
-#if 0
-	if (!vma->vm_file && ((vma->vm_flags & VM_EXEC) == 0))
-		return;
-#endif
-
-	if (cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
-		return;
-
-	/* avoid an atomic op if possible */
-	if (test_bit(PG_arch_1, &pg->flags))
-		clear_bit(PG_arch_1, &pg->flags);
-}
-
-void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
-			     unsigned long addr, int len)
-{
-	unsigned long maddr;
-
-	maddr = (unsigned long)page_address(page) + (addr & ~PAGE_MASK);
-	flush_icache_range(maddr, maddr + len);
-}
-EXPORT_SYMBOL(flush_icache_user_range);
-
-/*
- * This is called at the end of handling a user page fault, when the
- * fault has been handled by updating a PTE in the linux page tables.
- * We use it to preload an HPTE into the hash table corresponding to
- * the updated linux PTE.
- * 
- * This must always be called with the mm->page_table_lock held
- */
-void update_mmu_cache(struct vm_area_struct *vma, unsigned long ea,
-		      pte_t pte)
-{
-	unsigned long vsid;
-	void *pgdir;
-	pte_t *ptep;
-	int local = 0;
-	cpumask_t tmp;
-	unsigned long flags;
-
-	/* handle i-cache coherency */
-	if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE) &&
-	    !cpu_has_feature(CPU_FTR_NOEXECUTE)) {
-		unsigned long pfn = pte_pfn(pte);
-		if (pfn_valid(pfn)) {
-			struct page *page = pfn_to_page(pfn);
-			if (!PageReserved(page)
-			    && !test_bit(PG_arch_1, &page->flags)) {
-				__flush_dcache_icache(page_address(page));
-				set_bit(PG_arch_1, &page->flags);
-			}
-		}
-	}
-
-	/* We only want HPTEs for linux PTEs that have _PAGE_ACCESSED set */
-	if (!pte_young(pte))
-		return;
-
-	pgdir = vma->vm_mm->pgd;
-	if (pgdir == NULL)
-		return;
-
-	ptep = find_linux_pte(pgdir, ea);
-	if (!ptep)
-		return;
-
-	vsid = get_vsid(vma->vm_mm->context.id, ea);
-
-	local_irq_save(flags);
-	tmp = cpumask_of_cpu(smp_processor_id());
-	if (cpus_equal(vma->vm_mm->cpu_vm_mask, tmp))
-		local = 1;
-
-	__hash_page(ea, pte_val(pte) & (_PAGE_USER|_PAGE_RW), vsid, ptep,
-		    0x300, local);
-	local_irq_restore(flags);
-}
-
-void __iomem * reserve_phb_iospace(unsigned long size)
-{
-	void __iomem *virt_addr;
-		
-	if (phbs_io_bot >= IMALLOC_BASE) 
-		panic("reserve_phb_iospace(): phb io space overflow\n");
-			
-	virt_addr = (void __iomem *) phbs_io_bot;
-	phbs_io_bot += size;
-
-	return virt_addr;
-}
-
-static void zero_ctor(void *addr, kmem_cache_t *cache, unsigned long flags)
-{
-	memset(addr, 0, kmem_cache_size(cache));
-}
-
-static const int pgtable_cache_size[2] = {
-	PTE_TABLE_SIZE, PMD_TABLE_SIZE
-};
-static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = {
-	"pgd_pte_cache", "pud_pmd_cache",
-};
-
-kmem_cache_t *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)];
-
-void pgtable_cache_init(void)
-{
-	int i;
-
-	BUILD_BUG_ON(PTE_TABLE_SIZE != pgtable_cache_size[PTE_CACHE_NUM]);
-	BUILD_BUG_ON(PMD_TABLE_SIZE != pgtable_cache_size[PMD_CACHE_NUM]);
-	BUILD_BUG_ON(PUD_TABLE_SIZE != pgtable_cache_size[PUD_CACHE_NUM]);
-	BUILD_BUG_ON(PGD_TABLE_SIZE != pgtable_cache_size[PGD_CACHE_NUM]);
-
-	for (i = 0; i < ARRAY_SIZE(pgtable_cache_size); i++) {
-		int size = pgtable_cache_size[i];
-		const char *name = pgtable_cache_name[i];
-
-		pgtable_cache[i] = kmem_cache_create(name,
-						     size, size,
-						     SLAB_HWCACHE_ALIGN
-						     | SLAB_MUST_HWCACHE_ALIGN,
-						     zero_ctor,
-						     NULL);
-		if (! pgtable_cache[i])
-			panic("pgtable_cache_init(): could not create %s!\n",
-			      name);
-	}
-}
-
-pgprot_t phys_mem_access_prot(struct file *file, unsigned long addr,
-			      unsigned long size, pgprot_t vma_prot)
-{
-	if (ppc_md.phys_mem_access_prot)
-		return ppc_md.phys_mem_access_prot(file, addr, size, vma_prot);
-
-	if (!page_is_ram(addr >> PAGE_SHIFT))
-		vma_prot = __pgprot(pgprot_val(vma_prot)
-				    | _PAGE_GUARDED | _PAGE_NO_CACHE);
-	return vma_prot;
-}
-EXPORT_SYMBOL(phys_mem_access_prot);
diff --git a/arch/ppc64/mm/slb_low.S b/arch/ppc64/mm/slb_low.S
deleted file mode 100644
index a3a03da503bc..000000000000
--- a/arch/ppc64/mm/slb_low.S
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * arch/ppc64/mm/slb_low.S
- *
- * Low-level SLB routines
- *
- * Copyright (C) 2004 David Gibson <dwg@au.ibm.com>, IBM
- *
- * Based on earlier C version:
- * Dave Engebretsen and Mike Corrigan {engebret|mikejc}@us.ibm.com
- *    Copyright (c) 2001 Dave Engebretsen
- * Copyright (C) 2002 Anton Blanchard <anton@au.ibm.com>, IBM
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-
-#include <linux/config.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/mmu.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-#include <asm/cputable.h>
-
-/* void slb_allocate(unsigned long ea);
- *
- * Create an SLB entry for the given EA (user or kernel).
- * 	r3 = faulting address, r13 = PACA
- *	r9, r10, r11 are clobbered by this function
- * No other registers are examined or changed.
- */
-_GLOBAL(slb_allocate)
-	/*
-	 * First find a slot, round robin. Previously we tried to find
-	 * a free slot first but that took too long. Unfortunately we
-	 * dont have any LRU information to help us choose a slot.
-	 */
-#ifdef CONFIG_PPC_ISERIES
-	/*
-	 * On iSeries, the "bolted" stack segment can be cast out on
-	 * shared processor switch so we need to check for a miss on
-	 * it and restore it to the right slot.
-	 */
-	ld	r9,PACAKSAVE(r13)
-	clrrdi	r9,r9,28
-	clrrdi	r11,r3,28
-	li	r10,SLB_NUM_BOLTED-1	/* Stack goes in last bolted slot */
-	cmpld	r9,r11
-	beq	3f
-#endif /* CONFIG_PPC_ISERIES */
-
-	ld	r10,PACASTABRR(r13)
-	addi	r10,r10,1
-	/* use a cpu feature mask if we ever change our slb size */
-	cmpldi	r10,SLB_NUM_ENTRIES
-
-	blt+	4f
-	li	r10,SLB_NUM_BOLTED
-
-4:
-	std	r10,PACASTABRR(r13)
-3:
-	/* r3 = faulting address, r10 = entry */
-
-	srdi	r9,r3,60		/* get region */
-	srdi	r3,r3,28		/* get esid */
-	cmpldi	cr7,r9,0xc		/* cmp KERNELBASE for later use */
-
-	rldimi	r10,r3,28,0		/* r10= ESID<<28 | entry */
-	oris	r10,r10,SLB_ESID_V@h	/* r10 |= SLB_ESID_V */
-
-	/* r3 = esid, r10 = esid_data, cr7 = <>KERNELBASE */
-
-	blt	cr7,0f			/* user or kernel? */
-
-	/* kernel address: proto-VSID = ESID */
-	/* WARNING - MAGIC: we don't use the VSID 0xfffffffff, but
-	 * this code will generate the protoVSID 0xfffffffff for the
-	 * top segment.  That's ok, the scramble below will translate
-	 * it to VSID 0, which is reserved as a bad VSID - one which
-	 * will never have any pages in it.  */
-	li	r11,SLB_VSID_KERNEL
-BEGIN_FTR_SECTION
-	bne	cr7,9f
-	li	r11,(SLB_VSID_KERNEL|SLB_VSID_L)
-END_FTR_SECTION_IFSET(CPU_FTR_16M_PAGE)
-	b	9f
-
-0:	/* user address: proto-VSID = context<<15 | ESID */
-	srdi.	r9,r3,USER_ESID_BITS
-	bne-	8f			/* invalid ea bits set */
-
-#ifdef CONFIG_HUGETLB_PAGE
-BEGIN_FTR_SECTION
-	lhz	r9,PACAHIGHHTLBAREAS(r13)
-	srdi	r11,r3,(HTLB_AREA_SHIFT-SID_SHIFT)
-	srd	r9,r9,r11
-	lhz	r11,PACALOWHTLBAREAS(r13)
-	srd	r11,r11,r3
-	or	r9,r9,r11
-END_FTR_SECTION_IFSET(CPU_FTR_16M_PAGE)
-#endif /* CONFIG_HUGETLB_PAGE */
-
-	li	r11,SLB_VSID_USER
-
-#ifdef CONFIG_HUGETLB_PAGE
-BEGIN_FTR_SECTION
-	rldimi	r11,r9,8,55		/* shift masked bit into SLB_VSID_L */
-END_FTR_SECTION_IFSET(CPU_FTR_16M_PAGE)
-#endif /* CONFIG_HUGETLB_PAGE */
-
-	ld	r9,PACACONTEXTID(r13)
-	rldimi	r3,r9,USER_ESID_BITS,0
-
-9:	/* r3 = protovsid, r11 = flags, r10 = esid_data, cr7 = <>KERNELBASE */
-	ASM_VSID_SCRAMBLE(r3,r9)
-
-	rldimi	r11,r3,SLB_VSID_SHIFT,16	/* combine VSID and flags */
-
-	/*
-	 * No need for an isync before or after this slbmte. The exception
-	 * we enter with and the rfid we exit with are context synchronizing.
-	 */
-	slbmte	r11,r10
-
-	bgelr	cr7			/* we're done for kernel addresses */
-
-	/* Update the slb cache */
-	lhz	r3,PACASLBCACHEPTR(r13)	/* offset = paca->slb_cache_ptr */
-	cmpldi	r3,SLB_CACHE_ENTRIES
-	bge	1f
-
-	/* still room in the slb cache */
-	sldi	r11,r3,1		/* r11 = offset * sizeof(u16) */
-	rldicl	r10,r10,36,28		/* get low 16 bits of the ESID */
-	add	r11,r11,r13		/* r11 = (u16 *)paca + offset */
-	sth	r10,PACASLBCACHE(r11)	/* paca->slb_cache[offset] = esid */
-	addi	r3,r3,1			/* offset++ */
-	b	2f
-1:					/* offset >= SLB_CACHE_ENTRIES */
-	li	r3,SLB_CACHE_ENTRIES+1
-2:
-	sth	r3,PACASLBCACHEPTR(r13)	/* paca->slb_cache_ptr = offset */
-	blr
-
-8:	/* invalid EA */
-	li	r3,0			/* BAD_VSID */
-	li	r11,SLB_VSID_USER	/* flags don't much matter */
-	b	9b
diff --git a/arch/ppc64/oprofile/Kconfig b/arch/ppc64/oprofile/Kconfig
deleted file mode 100644
index 5ade19801b97..000000000000
--- a/arch/ppc64/oprofile/Kconfig
+++ /dev/null
@@ -1,23 +0,0 @@
-
-menu "Profiling support"
-	depends on EXPERIMENTAL
-
-config PROFILING
-	bool "Profiling support (EXPERIMENTAL)"
-	help
-	  Say Y here to enable the extended profiling support mechanisms used
-	  by profilers such as OProfile.
-	  
-
-config OPROFILE
-	tristate "OProfile system profiling (EXPERIMENTAL)"
-	depends on PROFILING
-	help
-	  OProfile is a profiling system capable of profiling the
-	  whole system, include the kernel, kernel modules, libraries,
-	  and applications.
-
-	  If unsure, say N.
-
-endmenu
-
diff --git a/arch/ppc64/oprofile/Makefile b/arch/ppc64/oprofile/Makefile
deleted file mode 100644
index 162dbf06c142..000000000000
--- a/arch/ppc64/oprofile/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-obj-$(CONFIG_OPROFILE) += oprofile.o
-
-DRIVER_OBJS := $(addprefix ../../../drivers/oprofile/, \
-		oprof.o cpu_buffer.o buffer_sync.o \
-		event_buffer.o oprofile_files.o \
-		oprofilefs.o oprofile_stats.o \
-		timer_int.o )
-
-oprofile-y := $(DRIVER_OBJS) common.o op_model_rs64.o op_model_power4.o
diff --git a/arch/ppc64/xmon/Makefile b/arch/ppc64/xmon/Makefile
deleted file mode 100644
index fb21a7088d3e..000000000000
--- a/arch/ppc64/xmon/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-# Makefile for xmon
-
-EXTRA_CFLAGS += -mno-minimal-toc
-
-obj-y := start.o xmon.o ppc-dis.o ppc-opc.o subr_prf.o setjmp.o
diff --git a/arch/ppc64/xmon/nonstdio.h b/arch/ppc64/xmon/nonstdio.h
deleted file mode 100644
index 84211a21c6f4..000000000000
--- a/arch/ppc64/xmon/nonstdio.h
+++ /dev/null
@@ -1,22 +0,0 @@
-typedef int	FILE;
-extern FILE *xmon_stdin, *xmon_stdout;
-#define EOF	(-1)
-#define stdin	xmon_stdin
-#define stdout	xmon_stdout
-#define printf	xmon_printf
-#define fprintf	xmon_fprintf
-#define fputs	xmon_fputs
-#define fgets	xmon_fgets
-#define putchar	xmon_putchar
-#define getchar	xmon_getchar
-#define putc	xmon_putc
-#define getc	xmon_getc
-#define fopen(n, m)	NULL
-#define fflush(f)	do {} while (0)
-#define fclose(f)	do {} while (0)
-extern char *fgets(char *, int, void *);
-extern void xmon_printf(const char *, ...);
-extern void xmon_fprintf(void *, const char *, ...);
-extern void xmon_sprintf(char *, const char *, ...);
-
-#define perror(s)	printf("%s: no files!\n", (s))
diff --git a/arch/ppc64/xmon/privinst.h b/arch/ppc64/xmon/privinst.h
deleted file mode 100644
index 02eb40dac0b3..000000000000
--- a/arch/ppc64/xmon/privinst.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * Copyright (C) 1996 Paul Mackerras.
- *
- *      This program is free software; you can redistribute it and/or
- *      modify it under the terms of the GNU General Public License
- *      as published by the Free Software Foundation; either version
- *      2 of the License, or (at your option) any later version.
- */
-
-#define GETREG(reg)		\
-    static inline unsigned long get_ ## reg (void)	\
-	{ unsigned long ret; asm volatile ("mf" #reg " %0" : "=r" (ret) :); return ret; }
-
-#define SETREG(reg)		\
-    static inline void set_ ## reg (unsigned long val)	\
-	{ asm volatile ("mt" #reg " %0" : : "r" (val)); }
-
-GETREG(msr)
-SETREG(msrd)
-GETREG(cr)
-
-#define GSETSPR(n, name)	\
-    static inline long get_ ## name (void) \
-	{ long ret; asm volatile ("mfspr %0," #n : "=r" (ret) : ); return ret; } \
-    static inline void set_ ## name (long val) \
-	{ asm volatile ("mtspr " #n ",%0" : : "r" (val)); }
-
-GSETSPR(0, mq)
-GSETSPR(1, xer)
-GSETSPR(4, rtcu)
-GSETSPR(5, rtcl)
-GSETSPR(8, lr)
-GSETSPR(9, ctr)
-GSETSPR(18, dsisr)
-GSETSPR(19, dar)
-GSETSPR(22, dec)
-GSETSPR(25, sdr1)
-GSETSPR(26, srr0)
-GSETSPR(27, srr1)
-GSETSPR(272, sprg0)
-GSETSPR(273, sprg1)
-GSETSPR(274, sprg2)
-GSETSPR(275, sprg3)
-GSETSPR(282, ear)
-GSETSPR(287, pvr)
-GSETSPR(1008, hid0)
-GSETSPR(1009, hid1)
-GSETSPR(1010, iabr)
-GSETSPR(1023, pir)
-
-static inline void store_inst(void *p)
-{
-	asm volatile ("dcbst 0,%0; sync; icbi 0,%0; isync" : : "r" (p));
-}
-
-static inline void cflush(void *p)
-{
-	asm volatile ("dcbf 0,%0; icbi 0,%0" : : "r" (p));
-}
-
-static inline void cinval(void *p)
-{
-	asm volatile ("dcbi 0,%0; icbi 0,%0" : : "r" (p));
-}
diff --git a/arch/ppc64/xmon/setjmp.S b/arch/ppc64/xmon/setjmp.S
deleted file mode 100644
index 30ee643d557c..000000000000
--- a/arch/ppc64/xmon/setjmp.S
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * Copyright (C) 1996 Paul Mackerras.
- *
- *      This program is free software; you can redistribute it and/or
- *      modify it under the terms of the GNU General Public License
- *      as published by the Free Software Foundation; either version
- *      2 of the License, or (at your option) any later version.
- *
- * NOTE: assert(sizeof(buf) > 184)
- */
-#include <asm/processor.h>
-#include <asm/ppc_asm.h>
-
-_GLOBAL(xmon_setjmp)
-	mflr    r0
-	std     r0,0(r3)
-	std     r1,8(r3)
-	std     r2,16(r3)
-	mfcr    r0
-	std     r0,24(r3)
-	std     r13,32(r3)
-	std     r14,40(r3)
-	std     r15,48(r3)
-	std     r16,56(r3)
-	std     r17,64(r3)
-	std     r18,72(r3)
-	std     r19,80(r3)
-	std     r20,88(r3)
-	std     r21,96(r3)
-	std     r22,104(r3)
-	std     r23,112(r3)
-	std     r24,120(r3)
-	std     r25,128(r3)
-	std     r26,136(r3)
-	std     r27,144(r3)
-	std     r28,152(r3)
-	std     r29,160(r3)
-	std     r30,168(r3)
-	std     r31,176(r3)
-	li      r3,0
-	blr
-
-_GLOBAL(xmon_longjmp)
-	cmpdi   r4,0
-	bne     1f
-	li      r4,1
-1:	ld      r13,32(r3)
-	ld      r14,40(r3)
-	ld      r15,48(r3)
-	ld      r16,56(r3)
-	ld      r17,64(r3)
-	ld      r18,72(r3)
-	ld      r19,80(r3)
-	ld      r20,88(r3)
-	ld      r21,96(r3)
-	ld      r22,104(r3)
-	ld      r23,112(r3)
-	ld      r24,120(r3)
-	ld      r25,128(r3)
-	ld      r26,136(r3)
-	ld      r27,144(r3)
-	ld      r28,152(r3)
-	ld      r29,160(r3)
-	ld      r30,168(r3)
-	ld      r31,176(r3)
-	ld      r0,24(r3)
-	mtcrf   56,r0
-	ld      r0,0(r3)
-	ld      r1,8(r3)
-	ld      r2,16(r3)
-	mtlr    r0
-	mr      r3,r4
-	blr
diff --git a/arch/ppc64/xmon/start.c b/arch/ppc64/xmon/start.c
deleted file mode 100644
index e50c158191e1..000000000000
--- a/arch/ppc64/xmon/start.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * Copyright (C) 1996 Paul Mackerras.
- *
- *      This program is free software; you can redistribute it and/or
- *      modify it under the terms of the GNU General Public License
- *      as published by the Free Software Foundation; either version
- *      2 of the License, or (at your option) any later version.
- */
-#include <linux/config.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/sysrq.h>
-#include <linux/init.h>
-#include <asm/machdep.h>
-#include <asm/io.h>
-#include <asm/page.h>
-#include <asm/prom.h>
-#include <asm/processor.h>
-#include <asm/udbg.h>
-#include <asm/system.h>
-#include "nonstdio.h"
-
-#ifdef CONFIG_MAGIC_SYSRQ
-
-static void sysrq_handle_xmon(int key, struct pt_regs *pt_regs,
-			      struct tty_struct *tty) 
-{
-	/* ensure xmon is enabled */
-	xmon_init(1);
-	debugger(pt_regs);
-}
-
-static struct sysrq_key_op sysrq_xmon_op = 
-{
-	.handler =	sysrq_handle_xmon,
-	.help_msg =	"Xmon",
-	.action_msg =	"Entering xmon",
-};
-
-static int __init setup_xmon_sysrq(void)
-{
-	register_sysrq_key('x', &sysrq_xmon_op);
-	return 0;
-}
-__initcall(setup_xmon_sysrq);
-#endif /* CONFIG_MAGIC_SYSRQ */
-
-int
-xmon_write(void *handle, void *ptr, int nb)
-{
-	return udbg_write(ptr, nb);
-}
-
-int
-xmon_read(void *handle, void *ptr, int nb)
-{
-	return udbg_read(ptr, nb);
-}
-
-int
-xmon_read_poll(void)
-{
-	if (udbg_getc_poll)
-		return udbg_getc_poll();
-	return -1;
-}
- 
-FILE *xmon_stdin;
-FILE *xmon_stdout;
-
-int
-xmon_putc(int c, void *f)
-{
-	char ch = c;
-
-	if (c == '\n')
-		xmon_putc('\r', f);
-	return xmon_write(f, &ch, 1) == 1? c: -1;
-}
-
-int
-xmon_putchar(int c)
-{
-	return xmon_putc(c, xmon_stdout);
-}
-
-int
-xmon_fputs(char *str, void *f)
-{
-	int n = strlen(str);
-
-	return xmon_write(f, str, n) == n? 0: -1;
-}
-
-int
-xmon_readchar(void)
-{
-	char ch;
-
-	for (;;) {
-		switch (xmon_read(xmon_stdin, &ch, 1)) {
-		case 1:
-			return ch;
-		case -1:
-			xmon_printf("read(stdin) returned -1\r\n", 0, 0);
-			return -1;
-		}
-	}
-}
-
-static char line[256];
-static char *lineptr;
-static int lineleft;
-
-int
-xmon_getchar(void)
-{
-	int c;
-
-	if (lineleft == 0) {
-		lineptr = line;
-		for (;;) {
-			c = xmon_readchar();
-			if (c == -1 || c == 4)
-				break;
-			if (c == '\r' || c == '\n') {
-				*lineptr++ = '\n';
-				xmon_putchar('\n');
-				break;
-			}
-			switch (c) {
-			case 0177:
-			case '\b':
-				if (lineptr > line) {
-					xmon_putchar('\b');
-					xmon_putchar(' ');
-					xmon_putchar('\b');
-					--lineptr;
-				}
-				break;
-			case 'U' & 0x1F:
-				while (lineptr > line) {
-					xmon_putchar('\b');
-					xmon_putchar(' ');
-					xmon_putchar('\b');
-					--lineptr;
-				}
-				break;
-			default:
-				if (lineptr >= &line[sizeof(line) - 1])
-					xmon_putchar('\a');
-				else {
-					xmon_putchar(c);
-					*lineptr++ = c;
-				}
-			}
-		}
-		lineleft = lineptr - line;
-		lineptr = line;
-	}
-	if (lineleft == 0)
-		return -1;
-	--lineleft;
-	return *lineptr++;
-}
-
-char *
-xmon_fgets(char *str, int nb, void *f)
-{
-	char *p;
-	int c;
-
-	for (p = str; p < str + nb - 1; ) {
-		c = xmon_getchar();
-		if (c == -1) {
-			if (p == str)
-				return NULL;
-			break;
-		}
-		*p++ = c;
-		if (c == '\n')
-			break;
-	}
-	*p = 0;
-	return str;
-}
diff --git a/arch/ppc64/xmon/subr_prf.c b/arch/ppc64/xmon/subr_prf.c
deleted file mode 100644
index 5242bd7d0959..000000000000
--- a/arch/ppc64/xmon/subr_prf.c
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Written by Cort Dougan to replace the version originally used
- * by Paul Mackerras, which came from NetBSD and thus had copyright
- * conflicts with Linux.
- *
- * This file makes liberal use of the standard linux utility
- * routines to reduce the size of the binary.  We assume we can
- * trust some parts of Linux inside the debugger.
- *   -- Cort (cort@cs.nmt.edu)
- *
- * Copyright (C) 1999 Cort Dougan.
- *
- *      This program is free software; you can redistribute it and/or
- *      modify it under the terms of the GNU General Public License
- *      as published by the Free Software Foundation; either version
- *      2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <stdarg.h>
-#include "nonstdio.h"
-
-extern int xmon_write(void *, void *, int);
-
-void
-xmon_vfprintf(void *f, const char *fmt, va_list ap)
-{
-	static char xmon_buf[2048];
-	int n;
-
-	n = vsprintf(xmon_buf, fmt, ap);
-	xmon_write(f, xmon_buf, n);
-}
-
-void
-xmon_printf(const char *fmt, ...)
-{
-	va_list ap;
-
-	va_start(ap, fmt);
-	xmon_vfprintf(stdout, fmt, ap);
-	va_end(ap);
-}
-
-void
-xmon_fprintf(void *f, const char *fmt, ...)
-{
-	va_list ap;
-
-	va_start(ap, fmt);
-	xmon_vfprintf(f, fmt, ap);
-	va_end(ap);
-}
-
diff --git a/arch/s390/Makefile b/arch/s390/Makefile
index 98db30481d97..73a09a6ee6c8 100644
--- a/arch/s390/Makefile
+++ b/arch/s390/Makefile
@@ -76,9 +76,7 @@ AFLAGS		+= $(aflags-y)
 OBJCOPYFLAGS	:= -O binary
 LDFLAGS_vmlinux := -e start
 
-head-$(CONFIG_ARCH_S390_31)	+= arch/$(ARCH)/kernel/head.o
-head-$(CONFIG_ARCH_S390X)	+= arch/$(ARCH)/kernel/head64.o
-head-y				+= arch/$(ARCH)/kernel/init_task.o
+head-y		:= arch/$(ARCH)/kernel/head.o arch/$(ARCH)/kernel/init_task.o
 
 core-y		+= arch/$(ARCH)/mm/ arch/$(ARCH)/kernel/ arch/$(ARCH)/crypto/ \
 		   arch/$(ARCH)/appldata/
diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c
index c9f2f60cfa58..dee6ab54984d 100644
--- a/arch/s390/appldata/appldata_base.c
+++ b/arch/s390/appldata/appldata_base.c
@@ -592,12 +592,15 @@ int appldata_register_ops(struct appldata_ops *ops)
  */
 void appldata_unregister_ops(struct appldata_ops *ops)
 {
+	void *table;
 	spin_lock(&appldata_ops_lock);
-	unregister_sysctl_table(ops->sysctl_header);
 	list_del(&ops->list);
-	kfree(ops->ctl_table);
+	/* at that point any incoming access will fail */
+	table = ops->ctl_table;
 	ops->ctl_table = NULL;
 	spin_unlock(&appldata_ops_lock);
+	unregister_sysctl_table(ops->sysctl_header);
+	kfree(table);
 	P_INFO("%s-ops unregistered!\n", ops->name);
 }
 /********************** module-ops management <END> **************************/
diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile
index 8584dd823218..7434c32bc631 100644
--- a/arch/s390/kernel/Makefile
+++ b/arch/s390/kernel/Makefile
@@ -8,9 +8,7 @@ obj-y	:=  bitmap.o traps.o time.o process.o \
             setup.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \
             semaphore.o s390_ext.o debug.o profile.o irq.o reipl_diag.o
 
-extra-$(CONFIG_ARCH_S390_31)	+= head.o 
-extra-$(CONFIG_ARCH_S390X)	+= head64.o 
-extra-y				+= init_task.o vmlinux.lds
+extra-y				+= head.o init_task.o vmlinux.lds
 
 obj-$(CONFIG_MODULES)		+= s390_ksyms.o module.o
 obj-$(CONFIG_SMP)		+= smp.o
diff --git a/arch/s390/kernel/compat_ioctl.c b/arch/s390/kernel/compat_ioctl.c
index 24a1e9f069a7..6504c4e69986 100644
--- a/arch/s390/kernel/compat_ioctl.c
+++ b/arch/s390/kernel/compat_ioctl.c
@@ -18,6 +18,8 @@
 #include <asm/dasd.h>
 #include <asm/cmb.h>
 #include <asm/tape390.h>
+#include <asm/ccwdev.h>
+#include "../../../drivers/s390/char/raw3270.h"
 
 static int do_ioctl32_pointer(unsigned int fd, unsigned int cmd,
 				unsigned long arg, struct file *f)
@@ -62,6 +64,13 @@ COMPATIBLE_IOCTL(BIODASDCMFENABLE)
 COMPATIBLE_IOCTL(BIODASDCMFDISABLE)
 COMPATIBLE_IOCTL(BIODASDREADALLCMB)
 
+COMPATIBLE_IOCTL(TUBICMD)
+COMPATIBLE_IOCTL(TUBOCMD)
+COMPATIBLE_IOCTL(TUBGETI)
+COMPATIBLE_IOCTL(TUBGETO)
+COMPATIBLE_IOCTL(TUBSETMOD)
+COMPATIBLE_IOCTL(TUBGETMOD)
+
 COMPATIBLE_IOCTL(TAPE390_DISPLAY)
 
 /* s390 doesn't need handlers here */
diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c
index 7358cdb8441f..4ff6808456ea 100644
--- a/arch/s390/kernel/compat_signal.c
+++ b/arch/s390/kernel/compat_signal.c
@@ -143,7 +143,7 @@ int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from)
 			break;
 		case __SI_FAULT >> 16:
 			err |= __get_user(tmp, &from->si_addr);
-			to->si_addr = (void *)(u64) (tmp & PSW32_ADDR_INSN);
+			to->si_addr = (void __user *)(u64) (tmp & PSW32_ADDR_INSN);
 			break;
 		case __SI_POLL >> 16:
 			err |= __get_user(to->si_band, &from->si_band);
@@ -338,7 +338,7 @@ sys32_sigaltstack(const stack_t32 __user *uss, stack_t32 __user *uoss,
 		err |= __get_user(kss.ss_flags, &uss->ss_flags);
 		if (err)
 			return -EFAULT;
-		kss.ss_sp = (void *) ss_sp;
+		kss.ss_sp = (void __user *) ss_sp;
 	}
 
 	set_fs (KERNEL_DS);
@@ -461,7 +461,7 @@ asmlinkage long sys32_rt_sigreturn(struct pt_regs *regs)
 		goto badframe;
 
 	err = __get_user(ss_sp, &frame->uc.uc_stack.ss_sp);
-	st.ss_sp = (void *) A((unsigned long)ss_sp);
+	st.ss_sp = compat_ptr(ss_sp);
 	err |= __get_user(st.ss_size, &frame->uc.uc_stack.ss_size);
 	err |= __get_user(st.ss_flags, &frame->uc.uc_stack.ss_flags);
 	if (err)
diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c
index bc59282da762..896d39d0e4ce 100644
--- a/arch/s390/kernel/debug.c
+++ b/arch/s390/kernel/debug.c
@@ -486,7 +486,7 @@ out:
  * - goto next entry in p_info
  */
 
-extern inline int
+static inline int
 debug_next_entry(file_private_info_t *p_info)
 {
 	debug_info_t *id;
@@ -800,7 +800,7 @@ debug_set_level(debug_info_t* id, int new_level)
  * - set active entry to next in the ring buffer
  */
 
-extern inline void
+static inline void
 proceed_active_entry(debug_info_t * id)
 {
 	if ((id->active_entries[id->active_area] += id->entry_size)
@@ -817,7 +817,7 @@ proceed_active_entry(debug_info_t * id)
  * - set active area to next in the ring buffer
  */
 
-extern inline void
+static inline void
 proceed_active_area(debug_info_t * id)
 {
 	id->active_area++;
@@ -828,7 +828,7 @@ proceed_active_area(debug_info_t * id)
  * get_active_entry:
  */
 
-extern inline debug_entry_t*
+static inline debug_entry_t*
 get_active_entry(debug_info_t * id)
 {
 	return (debug_entry_t *) (((char *) id->areas[id->active_area]
@@ -841,7 +841,7 @@ get_active_entry(debug_info_t * id)
  * - set timestamp, caller address, cpu number etc.
  */
 
-extern inline void
+static inline void
 debug_finish_entry(debug_info_t * id, debug_entry_t* active, int level,
 			int exception)
 {
@@ -971,7 +971,7 @@ debug_entry_t
  * counts arguments in format string for sprintf view
  */
 
-extern inline int
+static inline int
 debug_count_numargs(char *string)
 {
 	int numargs=0;
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index 9b30f4cf32c4..27b07730b7b8 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -288,7 +288,7 @@ sysc_sigpending:
 	bo	BASED(sysc_restart)
 	tm	__TI_flags+3(%r9),_TIF_SINGLE_STEP
 	bo	BASED(sysc_singlestep)
-	b	BASED(sysc_leave)      # out of here, do NOT recheck
+	b	BASED(sysc_work_loop)
 
 #
 # _TIF_RESTART_SVC is set, set up registers and restart svc
@@ -645,7 +645,7 @@ io_sigpending:
         l       %r1,BASED(.Ldo_signal)
 	basr    %r14,%r1	       # call do_signal
         stnsm   __SF_EMPTY(%r15),0xfc  # disable I/O and ext. interrupts
-	b	BASED(io_leave)        # out of here, do NOT recheck
+	b	BASED(io_work_loop)
 
 /*
  * External interrupt handler routine
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index 7b9b4a2ba1d7..4eb71ffcf484 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -283,7 +283,7 @@ sysc_sigpending:
 	jo	sysc_restart
 	tm	__TI_flags+7(%r9),_TIF_SINGLE_STEP
 	jo	sysc_singlestep
-	j	sysc_leave        # out of here, do NOT recheck
+	j	sysc_work_loop
 
 #
 # _TIF_RESTART_SVC is set, set up registers and restart svc
@@ -684,7 +684,7 @@ io_sigpending:
 	slgr    %r3,%r3			# clear *oldset
 	brasl	%r14,do_signal		# call do_signal
 	stnsm   __SF_EMPTY(%r15),0xfc	# disable I/O and ext. interrupts
-	j	sysc_leave		# out of here, do NOT recheck
+	j	io_work_loop
 
 /*
  * External interrupt handler routine
diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S
index 55654b6e16dc..d31a97c89f68 100644
--- a/arch/s390/kernel/head.S
+++ b/arch/s390/kernel/head.S
@@ -1,11 +1,12 @@
 /*
  *  arch/s390/kernel/head.S
  *
- *  S390 version
- *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Hartmut Penner (hp@de.ibm.com),
- *               Martin Schwidefsky (schwidefsky@de.ibm.com),
- *               Rob van der Heij (rvdhei@iae.nl)
+ * (C) Copyright IBM Corp. 1999, 2005
+ *
+ *    Author(s): Hartmut Penner <hp@de.ibm.com>
+ *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
+ *		 Rob van der Heij <rvdhei@iae.nl>
+ *		 Heiko Carstens <heiko.carstens@de.ibm.com>
  *
  * There are 5 different IPL methods
  *  1) load the image directly into ram at address 0 and do an PSW restart
@@ -19,12 +20,7 @@
  *  5) direct call of start by the SALIPL loader
  *  We use the cpuid to distinguish between VM and native ipl
  *  params for kernel are pushed to 0x10400 (see setup.h)
-
-    Changes: 
-    Okt 25 2000 <rvdheij@iae.nl>
-	added code to skip HDR and EOF to allow SL tape IPL (5 retries)
-	changed first CCW from rewind to backspace block
-
+ *
  */
 
 #include <linux/config.h>
@@ -34,6 +30,12 @@
 #include <asm/thread_info.h>
 #include <asm/page.h>
 
+#ifdef CONFIG_ARCH_S390X
+#define ARCH_OFFSET	4
+#else
+#define ARCH_OFFSET	0
+#endif
+
 #ifndef CONFIG_IPL
         .org   0
         .long  0x00080000,0x80000000+startup   # Just a restart PSW
@@ -201,7 +203,7 @@
         ssch  0(%r3)                           # load chunk of 1600 bytes
         bnz   .Llderr
 .Lwait4irq:
-        mvc   __LC_IO_NEW_PSW(8),.Lnewpsw      # set up IO interrupt psw
+        mvc   0x78(8),.Lnewpsw                 # set up IO interrupt psw
         lpsw  .Lwaitpsw              
 .Lioint:
         c     %r1,0xb8                         # compare subchannel number
@@ -265,13 +267,13 @@ iplstart:
         la    %r2,IPL_BS                       # load start address
         bas   %r14,.Lloader                    # load rest of ipl image
         l     %r12,.Lparm                      # pointer to parameter area
-        st    %r1,IPL_DEVICE-PARMAREA(%r12)    # store ipl device number
+        st    %r1,IPL_DEVICE+ARCH_OFFSET-PARMAREA(%r12) # save ipl device number
 
 #
 # load parameter file from ipl device
 #
 .Lagain1:
- 	l     %r2,INITRD_START-PARMAREA(%r12)  # use ramdisk location as temp
+ 	l     %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # ramdisk loc. is temp
         bas   %r14,.Lloader                    # load parameter file
         ltr   %r2,%r2                          # got anything ?
         bz    .Lnopf
@@ -279,7 +281,7 @@ iplstart:
 	bnh   .Lnotrunc
 	la    %r2,895
 .Lnotrunc:
-	l     %r4,INITRD_START-PARMAREA(%r12)
+	l     %r4,INITRD_START+ARCH_OFFSET-PARMAREA(%r12)
 	clc   0(3,%r4),.L_hdr		       # if it is HDRx
 	bz    .Lagain1			       # skip dataset header
 	clc   0(3,%r4),.L_eof		       # if it is EOFx
@@ -322,14 +324,14 @@ iplstart:
 # load ramdisk from ipl device
 #	
 .Lagain2:
- 	l     %r2,INITRD_START-PARMAREA(%r12)  # load adr. of ramdisk
+ 	l     %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # addr of ramdisk
         bas   %r14,.Lloader                    # load ramdisk
- 	st    %r2,INITRD_SIZE-PARMAREA(%r12)   # store size of ramdisk
+ 	st    %r2,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r12) # store size of ramdisk
         ltr   %r2,%r2
         bnz   .Lrdcont
-        st    %r2,INITRD_START-PARMAREA(%r12)  # no ramdisk found, null it
+        st    %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # no ramdisk found
 .Lrdcont:
-	l     %r2,INITRD_START-PARMAREA(%r12)
+	l     %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12)
 
 	clc   0(3,%r2),.L_hdr		       # skip HDRx and EOFx 
 	bz    .Lagain2
@@ -432,10 +434,10 @@ start:
 	la    %r3,1(%r3)
 .done:
         l     %r1,.memsize
-	st    %r3,0(%r1)
+	st    %r3,ARCH_OFFSET(%r1)
 	slr   %r0,%r0
-	st    %r0,INITRD_SIZE-PARMAREA(%r11)
-	st    %r0,INITRD_START-PARMAREA(%r11)
+	st    %r0,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r11)
+	st    %r0,INITRD_START+ARCH_OFFSET-PARMAREA(%r11)
 	j     startup                   # continue with startup
 .tbl:	.long _ebcasc			# translate table
 .cmd:	.long COMMAND_LINE		# address of command line buffer
@@ -478,322 +480,67 @@ start:
 	.byte 0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7 
 	.byte 0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfe,0xff
 
-#
-# startup-code at 0x10000, running in real mode
-# this is called either by the ipl loader or directly by PSW restart
-# or linload or SALIPL
-#
-        .org  0x10000
-startup:basr  %r13,0                     # get base
-.LPG1:  lctl  %c0,%c15,.Lctl-.LPG1(%r13) # load control registers
-	la    %r12,_pstart-.LPG1(%r13)   # pointer to parameter area
-					 # move IPL device to lowcore
-        mvc   __LC_IPLDEV(4),IPL_DEVICE-PARMAREA(%r12)
-	
-#
-# clear bss memory
-#
-        l     %r2,.Lbss_bgn-.LPG1(%r13) # start of bss
-        l     %r3,.Lbss_end-.LPG1(%r13) # end of bss
-        sr    %r3,%r2                   # length of bss
-        sr    %r4,%r4                   #
-        sr    %r5,%r5                   # set src,length and pad to zero
-        sr    %r0,%r0                   #
-        mvcle %r2,%r4,0                 # clear mem
-        jo    .-4                       # branch back, if not finish
-
-	l     %r2,.Lrcp-.LPG1(%r13)	# Read SCP forced command word
-.Lservicecall:
-	stosm .Lpmask-.LPG1(%r13),0x01	# authorize ext interrupts
-
-	stctl %r0, %r0,.Lcr-.LPG1(%r13)	# get cr0
-	la    %r1,0x200			# set bit 22
-	o     %r1,.Lcr-.LPG1(%r13)	# or old cr0 with r1
-	st    %r1,.Lcr-.LPG1(%r13)
-	lctl  %r0, %r0,.Lcr-.LPG1(%r13)	# load modified cr0
-
-	mvc   __LC_EXT_NEW_PSW(8),.Lpcext-.LPG1(%r13) # set postcall psw
-	la    %r1, .Lsclph-.LPG1(%r13)
-	a     %r1,__LC_EXT_NEW_PSW+4	# set handler
-	st    %r1,__LC_EXT_NEW_PSW+4
-
-	la    %r4,_pstart-.LPG1(%r13)	# %r4 is our index for sccb stuff
-	la    %r1, .Lsccb-PARMAREA(%r4)	# our sccb
-	.insn rre,0xb2200000,%r2,%r1	# service call
-	ipm   %r1
-	srl   %r1,28			# get cc code
-	xr    %r3, %r3
-	chi   %r1,3
-	be    .Lfchunk-.LPG1(%r13)	# leave
-	chi   %r1,2
-	be    .Lservicecall-.LPG1(%r13)
-	lpsw  .Lwaitsclp-.LPG1(%r13)
-.Lsclph:
-	lh    %r1,.Lsccbr-PARMAREA(%r4)
-	chi   %r1,0x10			# 0x0010 is the sucess code
-	je    .Lprocsccb		# let's process the sccb
-	chi   %r1,0x1f0
-	bne   .Lfchunk-.LPG1(%r13)	# unhandled error code
-	c     %r2, .Lrcp-.LPG1(%r13)	# Did we try Read SCP forced
-	bne   .Lfchunk-.LPG1(%r13)	# if no, give up
-	l     %r2, .Lrcp2-.LPG1(%r13)	# try with Read SCP
-	b     .Lservicecall-.LPG1(%r13)
-.Lprocsccb:
-	lhi   %r1,0
-	icm   %r1,3,.Lscpincr1-PARMAREA(%r4) # use this one if != 0
-	jnz   .Lscnd
-	lhi   %r1,0x800			# otherwise report 2GB
-.Lscnd:
-	lhi   %r3,0x800			# limit reported memory size to 2GB
-	cr    %r1,%r3
-	jl    .Lno2gb
-	lr    %r1,%r3
-.Lno2gb:
-	xr    %r3,%r3			# same logic
-	ic    %r3,.Lscpa1-PARMAREA(%r4)
-	chi   %r3,0x00
-	jne   .Lcompmem
-	l     %r3,.Lscpa2-PARMAREA(%r13)
-.Lcompmem:
-	mr    %r2,%r1			# mem in MB on 128-bit
-	l     %r1,.Lonemb-.LPG1(%r13)
-	mr    %r2,%r1			# mem size in bytes in %r3
-	b     .Lfchunk-.LPG1(%r13)
-
-.Lpmask:
-	.byte 0
-.align 8
-.Lpcext:.long  0x00080000,0x80000000
-.Lcr:
-	.long 0x00			# place holder for cr0
-.Lwaitsclp:
-	.long 0x020A0000
-	.long .Lsclph
-.Lrcp:
-	.int 0x00120001			# Read SCP forced code
-.Lrcp2:
-	.int 0x00020001			# Read SCP code
-.Lonemb:
-	.int 0x100000
-.Lfchunk:
-
-#
-# find memory chunks.
-#
-	lr    %r9,%r3			 # end of mem
-	mvc   __LC_PGM_NEW_PSW(8),.Lpcmem-.LPG1(%r13)
-	la    %r1,1                      # test in increments of 128KB
-	sll   %r1,17
-	l     %r3,.Lmchunk-.LPG1(%r13)   # get pointer to memory_chunk array
-	slr   %r4,%r4                    # set start of chunk to zero
-	slr   %r5,%r5                    # set end of chunk to zero
-	slr   %r6,%r6			 # set access code to zero
-	la    %r10, MEMORY_CHUNKS	 # number of chunks
-.Lloop:
-	tprot 0(%r5),0			 # test protection of first byte
-	ipm   %r7
-	srl   %r7,28
-	clr   %r6,%r7			 # compare cc with last access code
-	be    .Lsame-.LPG1(%r13)
-	b     .Lchkmem-.LPG1(%r13)
-.Lsame:
-	ar    %r5,%r1			 # add 128KB to end of chunk
-	bno   .Lloop-.LPG1(%r13)	 # r1 < 0x80000000 -> loop
-.Lchkmem:				 # > 2GB or tprot got a program check
-	clr   %r4,%r5			 # chunk size > 0?
-	be    .Lchkloop-.LPG1(%r13)
-	st    %r4,0(%r3)		 # store start address of chunk
-	lr    %r0,%r5
-	slr   %r0,%r4
-	st    %r0,4(%r3)		 # store size of chunk
-	st    %r6,8(%r3)		 # store type of chunk
-	la    %r3,12(%r3)
-	l     %r4,.Lmemsize-.LPG1(%r13)	 # address of variable memory_size
-	st    %r5,0(%r4)		 # store last end to memory size
-	ahi   %r10,-1			 # update chunk number
-.Lchkloop:
-	lr    %r6,%r7			 # set access code to last cc
-	# we got an exception or we're starting a new
-	# chunk , we must check if we should
-	# still try to find valid memory (if we detected
-	# the amount of available storage), and if we
-	# have chunks left
-	xr    %r0,%r0
-	clr   %r0,%r9			 # did we detect memory?
-	je    .Ldonemem			 # if not, leave
-	chi   %r10,0			 # do we have chunks left?
-	je    .Ldonemem
-	alr   %r5,%r1			 # add 128KB to end of chunk
-	lr    %r4,%r5			 # potential new chunk
-	clr    %r5,%r9			 # should we go on?
-	jl     .Lloop
-.Ldonemem:		
-        l      %r12,.Lmflags-.LPG1(%r13) # get address of machine_flags
-#
-# find out if we are running under VM
-#
-        stidp  __LC_CPUID               # store cpuid
-	tm     __LC_CPUID,0xff          # running under VM ?
-	bno    .Lnovm-.LPG1(%r13)
-        oi     3(%r12),1                # set VM flag
-.Lnovm:
-        lh     %r0,__LC_CPUID+4         # get cpu version
-        chi    %r0,0x7490               # running on a P/390 ?
-        bne    .Lnop390-.LPG1(%r13)
-        oi     3(%r12),4                # set P/390 flag
-.Lnop390:
-
-#
-# find out if we have an IEEE fpu
-#
-        mvc    __LC_PGM_NEW_PSW(8),.Lpcfpu-.LPG1(%r13)
-	efpc   %r0,0                    # test IEEE extract fpc instruction
-        oi     3(%r12),2                # set IEEE fpu flag
-.Lchkfpu:
-
-#
-# find out if we have the CSP instruction
-#
-       mvc    __LC_PGM_NEW_PSW(8),.Lpccsp-.LPG1(%r13)
-       la     %r0,0
-       lr     %r1,%r0
-       la     %r2,4
-       csp    %r0,%r2                   # Test CSP instruction
-       oi     3(%r12),8                 # set CSP flag
-.Lchkcsp:
-
-#
-# find out if we have the MVPG instruction
-#
-       mvc    __LC_PGM_NEW_PSW(8),.Lpcmvpg-.LPG1(%r13)
-       sr     %r0,%r0
-       la     %r1,0
-       la     %r2,0
-       mvpg   %r1,%r2                   # Test CSP instruction
-       oi     3(%r12),16                # set MVPG flag
-.Lchkmvpg:
-
-#
-# find out if we have the IDTE instruction
-#
-	mvc	__LC_PGM_NEW_PSW(8),.Lpcidte-.LPG1(%r13)
-	.long	0xb2b10000		# store facility list
-	tm	0xc8,0x08		# check bit for clearing-by-ASCE
-	bno	.Lchkidte-.LPG1(%r13)
-	lhi	%r1,2094
-	lhi	%r2,0
-	.long	0xb98e2001
-	oi	3(%r12),0x80		# set IDTE flag
-.Lchkidte:
-
-        lpsw  .Lentry-.LPG1(13)         # jump to _stext in primary-space,
-                                        # virtual and never return ...
-        .align 8
-.Lentry:.long  0x00080000,0x80000000 + _stext
-.Lctl:  .long  0x04b50002               # cr0: various things
-        .long  0                        # cr1: primary space segment table
-        .long  .Lduct                   # cr2: dispatchable unit control table
-        .long  0                        # cr3: instruction authorization
-        .long  0                        # cr4: instruction authorization
-        .long  0xffffffff               # cr5: primary-aste origin
-        .long  0                        # cr6:  I/O interrupts
-        .long  0                        # cr7:  secondary space segment table
-        .long  0                        # cr8:  access registers translation
-        .long  0                        # cr9:  tracing off
-        .long  0                        # cr10: tracing off
-        .long  0                        # cr11: tracing off
-        .long  0                        # cr12: tracing off
-        .long  0                        # cr13: home space segment table
-        .long  0xc0000000               # cr14: machine check handling off
-        .long  0                        # cr15: linkage stack operations
-.Lpcmem:.long  0x00080000,0x80000000 + .Lchkmem
-.Lpcfpu:.long  0x00080000,0x80000000 + .Lchkfpu
-.Lpccsp:.long  0x00080000,0x80000000 + .Lchkcsp
-.Lpcmvpg:.long 0x00080000,0x80000000 + .Lchkmvpg
-.Lpcidte:.long 0x00080000,0x80000000 + .Lchkidte
-.Lmemsize:.long memory_size
-.Lmchunk:.long memory_chunk
-.Lmflags:.long machine_flags
-.Lbss_bgn:  .long  __bss_start
-.Lbss_end:  .long  _end
-
-	.org PARMAREA-64
-.Lduct:	.long 0,0,0,0,0,0,0,0
-	.long 0,0,0,0,0,0,0,0
-
-#
-# params at 10400 (setup.h)
-#
-	.org   PARMAREA
-	.global _pstart
-_pstart:	
-        .long  0,0                      # IPL_DEVICE
-        .long  0,RAMDISK_ORIGIN         # INITRD_START
-        .long  0,RAMDISK_SIZE           # INITRD_SIZE
-
-        .org   COMMAND_LINE
-    	.byte  "root=/dev/ram0 ro"
-        .byte  0
-	.org   0x11000
-.Lsccb:
-	.hword 0x1000			# length, one page
-	.byte 0x00,0x00,0x00
-	.byte 0x80			# variable response bit set
-.Lsccbr:
-	.hword 0x00			# response code
-.Lscpincr1:
-	.hword 0x00
-.Lscpa1:
-	.byte 0x00
-	.fill 89,1,0
-.Lscpa2:
-	.int 0x00
-.Lscpincr2:
-	.quad 0x00
-	.fill 3984,1,0
-	.org 0x12000
-	.global _pend
-_pend:	
-
-#ifdef CONFIG_SHARED_KERNEL
-	.org   0x100000
+.macro GET_IPL_DEVICE
+.Lget_ipl_device:
+	basr  %r12,0
+.LGID:	l     %r1,0xb8			# get sid
+	sll   %r1,15			# test if subchannel is enabled
+	srl   %r1,31
+	ltr   %r1,%r1
+	bz    0(%r14)			# subchannel disabled
+	l     %r1,0xb8
+	la    %r5,.Lipl_schib-.LGID(%r12)
+	stsch 0(%r5)		        # get schib of subchannel
+	bnz   0(%r14)			# schib not available
+	tm    5(%r5),0x01		# devno valid?
+	bno   0(%r14)
+	la    %r6,ipl_parameter_flags-.LGID(%r12)
+	oi    3(%r6),0x01		# set flag
+	la    %r2,ipl_devno-.LGID(%r12)
+	mvc   0(2,%r2),6(%r5)		# store devno
+	tm    4(%r5),0x80		# qdio capable device?
+	bno   0(%r14)
+	oi    3(%r6),0x02		# set flag
+
+	# copy ipl parameters
+
+	lhi   %r0,4096
+	l     %r2,20(%r0)		# get address of parameter list
+	lhi   %r3,IPL_PARMBLOCK_ORIGIN
+	st    %r3,20(%r0)
+	lhi   %r4,1
+	cr    %r2,%r3			# start parameters < destination ?
+	jl    0f
+	lhi   %r1,1			# copy direction is upwards
+	j     1f
+0:	lhi   %r1,-1			# copy direction is downwards
+	ar    %r2,%r0
+	ar    %r3,%r0
+	ar    %r2,%r1
+	ar    %r3,%r1
+1:	mvc   0(1,%r3),0(%r2)		# finally copy ipl parameters
+	ar    %r3,%r1
+	ar    %r2,%r1
+	sr    %r0,%r4
+	jne   1b
+	b     0(%r14)
+
+	.align 4
+.Lipl_schib:
+	.rept 13
+	.long 0
+	.endr
+
+	.globl ipl_parameter_flags
+ipl_parameter_flags:
+	.long 0
+	.globl ipl_devno
+ipl_devno:
+	.word 0
+.endm
+
+#ifdef CONFIG_ARCH_S390X
+#include "head64.S"
+#else
+#include "head31.S"
 #endif
-
-#
-# startup-code, running in virtual mode
-#
-        .globl _stext
-_stext:	basr  %r13,0                    # get base
-.LPG2:
-#
-# Setup stack
-#
-        l     %r15,.Linittu-.LPG2(%r13)
-	mvc   __LC_CURRENT(4),__TI_task(%r15)
-        ahi   %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union + THREAD_SIZE
-        st    %r15,__LC_KERNEL_STACK    # set end of kernel stack
-        ahi   %r15,-96
-        xc    __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain
-
-# check control registers
-        stctl  %c0,%c15,0(%r15)
-	oi     2(%r15),0x40             # enable sigp emergency signal
-	oi     0(%r15),0x10             # switch on low address protection
-        lctl   %c0,%c15,0(%r15)
-
-#
-        lam    0,15,.Laregs-.LPG2(%r13) # load access regs needed by uaccess
-        l      %r14,.Lstart-.LPG2(%r13)
-        basr   %r14,%r14                # call start_kernel
-#
-# We returned from start_kernel ?!? PANIK
-#
-        basr  %r13,0
-	lpsw  .Ldw-.(%r13)           # load disabled wait psw
-#
-            .align 8
-.Ldw:	    .long  0x000a0000,0x00000000
-.Linittu:   .long  init_thread_union
-.Lstart:    .long  start_kernel
-.Laregs:    .long  0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-
diff --git a/arch/s390/kernel/head31.S b/arch/s390/kernel/head31.S
new file mode 100644
index 000000000000..2d3b089bfb83
--- /dev/null
+++ b/arch/s390/kernel/head31.S
@@ -0,0 +1,336 @@
+/*
+ * arch/s390/kernel/head31.S
+ *
+ * (C) Copyright IBM Corp. 2005
+ *
+ *   Author(s):	Hartmut Penner <hp@de.ibm.com>
+ *		Martin Schwidefsky <schwidefsky@de.ibm.com>
+ *		Rob van der Heij <rvdhei@iae.nl>
+ *		Heiko Carstens <heiko.carstens@de.ibm.com>
+ *
+ */
+
+#
+# startup-code at 0x10000, running in absolute addressing mode
+# this is called either by the ipl loader or directly by PSW restart
+# or linload or SALIPL
+#
+	.org	0x10000
+startup:basr	%r13,0			 # get base
+.LPG1:	l	%r1, .Lget_ipl_device_addr-.LPG1(%r13)
+	basr	%r14, %r1
+	lctl	%c0,%c15,.Lctl-.LPG1(%r13) # load control registers
+	la	%r12,_pstart-.LPG1(%r13) # pointer to parameter area
+					 # move IPL device to lowcore
+	mvc	__LC_IPLDEV(4),IPL_DEVICE-PARMAREA(%r12)
+
+#
+# clear bss memory
+#
+	l	%r2,.Lbss_bgn-.LPG1(%r13) # start of bss
+	l	%r3,.Lbss_end-.LPG1(%r13) # end of bss
+	sr	%r3,%r2			# length of bss
+	sr	%r4,%r4
+	sr	%r5,%r5			# set src,length and pad to zero
+	sr	%r0,%r0
+	mvcle	%r2,%r4,0		# clear mem
+	jo	.-4			# branch back, if not finish
+
+	l	%r2,.Lrcp-.LPG1(%r13)	# Read SCP forced command word
+.Lservicecall:
+	stosm	.Lpmask-.LPG1(%r13),0x01	# authorize ext interrupts
+
+	stctl	%r0, %r0,.Lcr-.LPG1(%r13)	# get cr0
+	la	%r1,0x200		# set bit 22
+	o	%r1,.Lcr-.LPG1(%r13)	# or old cr0 with r1
+	st	%r1,.Lcr-.LPG1(%r13)
+	lctl	%r0, %r0,.Lcr-.LPG1(%r13)	# load modified cr0
+
+	mvc	__LC_EXT_NEW_PSW(8),.Lpcext-.LPG1(%r13) # set postcall psw
+	la	%r1, .Lsclph-.LPG1(%r13)
+	a	%r1,__LC_EXT_NEW_PSW+4	# set handler
+	st	%r1,__LC_EXT_NEW_PSW+4
+
+	la	%r4,_pstart-.LPG1(%r13)	# %r4 is our index for sccb stuff
+	la	%r1, .Lsccb-PARMAREA(%r4)	# our sccb
+	.insn	rre,0xb2200000,%r2,%r1	# service call
+	ipm	%r1
+	srl	%r1,28			# get cc code
+	xr	%r3, %r3
+	chi	%r1,3
+	be	.Lfchunk-.LPG1(%r13)	# leave
+	chi	%r1,2
+	be	.Lservicecall-.LPG1(%r13)
+	lpsw	.Lwaitsclp-.LPG1(%r13)
+.Lsclph:
+	lh	%r1,.Lsccbr-PARMAREA(%r4)
+	chi	%r1,0x10		# 0x0010 is the sucess code
+	je	.Lprocsccb		# let's process the sccb
+	chi	%r1,0x1f0
+	bne	.Lfchunk-.LPG1(%r13)	# unhandled error code
+	c	%r2, .Lrcp-.LPG1(%r13)	# Did we try Read SCP forced
+	bne	.Lfchunk-.LPG1(%r13)	# if no, give up
+	l	%r2, .Lrcp2-.LPG1(%r13)	# try with Read SCP
+	b	.Lservicecall-.LPG1(%r13)
+.Lprocsccb:
+	lhi	%r1,0
+	icm	%r1,3,.Lscpincr1-PARMAREA(%r4) # use this one if != 0
+	jnz	.Lscnd
+	lhi	%r1,0x800		# otherwise report 2GB
+.Lscnd:
+	lhi	%r3,0x800		# limit reported memory size to 2GB
+	cr	%r1,%r3
+	jl	.Lno2gb
+	lr	%r1,%r3
+.Lno2gb:
+	xr	%r3,%r3			# same logic
+	ic	%r3,.Lscpa1-PARMAREA(%r4)
+	chi	%r3,0x00
+	jne	.Lcompmem
+	l	%r3,.Lscpa2-PARMAREA(%r13)
+.Lcompmem:
+	mr	%r2,%r1			# mem in MB on 128-bit
+	l	%r1,.Lonemb-.LPG1(%r13)
+	mr	%r2,%r1			# mem size in bytes in %r3
+	b	.Lfchunk-.LPG1(%r13)
+
+	.align 4
+.Lget_ipl_device_addr:
+	.long	.Lget_ipl_device
+.Lpmask:
+	.byte	0
+.align 8
+.Lpcext:.long	0x00080000,0x80000000
+.Lcr:
+	.long	0x00			# place holder for cr0
+.Lwaitsclp:
+	.long 0x010a0000,0x80000000 + .Lsclph
+.Lrcp:
+	.int	0x00120001		# Read SCP forced code
+.Lrcp2:
+	.int	0x00020001		# Read SCP code
+.Lonemb:
+	.int	0x100000
+.Lfchunk:
+
+#
+# find memory chunks.
+#
+	lr	%r9,%r3			# end of mem
+	mvc	__LC_PGM_NEW_PSW(8),.Lpcmem-.LPG1(%r13)
+	la	%r1,1			# test in increments of 128KB
+	sll	%r1,17
+	l	%r3,.Lmchunk-.LPG1(%r13) # get pointer to memory_chunk array
+	slr	%r4,%r4			# set start of chunk to zero
+	slr	%r5,%r5			# set end of chunk to zero
+	slr	%r6,%r6			# set access code to zero
+	la	%r10, MEMORY_CHUNKS	# number of chunks
+.Lloop:
+	tprot	0(%r5),0		# test protection of first byte
+	ipm	%r7
+	srl	%r7,28
+	clr	%r6,%r7			# compare cc with last access code
+	be	.Lsame-.LPG1(%r13)
+	b	.Lchkmem-.LPG1(%r13)
+.Lsame:
+	ar	%r5,%r1			# add 128KB to end of chunk
+	bno	.Lloop-.LPG1(%r13)	# r1 < 0x80000000 -> loop
+.Lchkmem:				# > 2GB or tprot got a program check
+	clr	%r4,%r5			# chunk size > 0?
+	be	.Lchkloop-.LPG1(%r13)
+	st	%r4,0(%r3)		# store start address of chunk
+	lr	%r0,%r5
+	slr	%r0,%r4
+	st	%r0,4(%r3)		# store size of chunk
+	st	%r6,8(%r3)		# store type of chunk
+	la	%r3,12(%r3)
+	l	%r4,.Lmemsize-.LPG1(%r13)	 # address of variable memory_size
+	st	%r5,0(%r4)		# store last end to memory size
+	ahi	%r10,-1			# update chunk number
+.Lchkloop:
+	lr	%r6,%r7			# set access code to last cc
+	# we got an exception or we're starting a new
+	# chunk , we must check if we should
+	# still try to find valid memory (if we detected
+	# the amount of available storage), and if we
+	# have chunks left
+	xr	%r0,%r0
+	clr	%r0,%r9			# did we detect memory?
+	je	.Ldonemem		# if not, leave
+	chi	%r10,0			# do we have chunks left?
+	je	.Ldonemem
+	alr	%r5,%r1			# add 128KB to end of chunk
+	lr	%r4,%r5			# potential new chunk
+	clr	%r5,%r9			# should we go on?
+	jl	.Lloop
+.Ldonemem:
+	l	%r12,.Lmflags-.LPG1(%r13) # get address of machine_flags
+#
+# find out if we are running under VM
+#
+	stidp	__LC_CPUID		# store cpuid
+	tm	__LC_CPUID,0xff		# running under VM ?
+	bno	.Lnovm-.LPG1(%r13)
+	oi	3(%r12),1		# set VM flag
+.Lnovm:
+	lh	%r0,__LC_CPUID+4	# get cpu version
+	chi	%r0,0x7490		# running on a P/390 ?
+	bne	.Lnop390-.LPG1(%r13)
+	oi	3(%r12),4		# set P/390 flag
+.Lnop390:
+
+#
+# find out if we have an IEEE fpu
+#
+	mvc	__LC_PGM_NEW_PSW(8),.Lpcfpu-.LPG1(%r13)
+	efpc	%r0,0			# test IEEE extract fpc instruction
+	oi	3(%r12),2		# set IEEE fpu flag
+.Lchkfpu:
+
+#
+# find out if we have the CSP instruction
+#
+       mvc	 __LC_PGM_NEW_PSW(8),.Lpccsp-.LPG1(%r13)
+       la	 %r0,0
+       lr	%r1,%r0
+       la	%r2,4
+       csp	%r0,%r2			# Test CSP instruction
+       oi	3(%r12),8		# set CSP flag
+.Lchkcsp:
+
+#
+# find out if we have the MVPG instruction
+#
+       mvc	__LC_PGM_NEW_PSW(8),.Lpcmvpg-.LPG1(%r13)
+       sr	%r0,%r0
+       la	%r1,0
+       la	%r2,0
+       mvpg	%r1,%r2			# Test CSP instruction
+       oi	3(%r12),16		# set MVPG flag
+.Lchkmvpg:
+
+#
+# find out if we have the IDTE instruction
+#
+	mvc	__LC_PGM_NEW_PSW(8),.Lpcidte-.LPG1(%r13)
+	.long	0xb2b10000		# store facility list
+	tm	0xc8,0x08		# check bit for clearing-by-ASCE
+	bno	.Lchkidte-.LPG1(%r13)
+	lhi	%r1,2094
+	lhi	%r2,0
+	.long	0xb98e2001
+	oi	3(%r12),0x80		# set IDTE flag
+.Lchkidte:
+
+	lpsw  .Lentry-.LPG1(13)		# jump to _stext in primary-space,
+					# virtual and never return ...
+	.align	8
+.Lentry:.long	0x00080000,0x80000000 + _stext
+.Lctl:	.long	0x04b50002		# cr0: various things
+	.long	0			# cr1: primary space segment table
+	.long	.Lduct			# cr2: dispatchable unit control table
+	.long	0			# cr3: instruction authorization
+	.long	0			# cr4: instruction authorization
+	.long	0xffffffff		# cr5: primary-aste origin
+	.long	0			# cr6:	I/O interrupts
+	.long	0			# cr7:	secondary space segment table
+	.long	0			# cr8:	access registers translation
+	.long	0			# cr9:	tracing off
+	.long	0			# cr10: tracing off
+	.long	0			# cr11: tracing off
+	.long	0			# cr12: tracing off
+	.long	0			# cr13: home space segment table
+	.long	0xc0000000		# cr14: machine check handling off
+	.long	0			# cr15: linkage stack operations
+.Lpcmem:.long	0x00080000,0x80000000 + .Lchkmem
+.Lpcfpu:.long	0x00080000,0x80000000 + .Lchkfpu
+.Lpccsp:.long	0x00080000,0x80000000 + .Lchkcsp
+.Lpcmvpg:.long	0x00080000,0x80000000 + .Lchkmvpg
+.Lpcidte:.long	0x00080000,0x80000000 + .Lchkidte
+.Lmemsize:.long memory_size
+.Lmchunk:.long	memory_chunk
+.Lmflags:.long	machine_flags
+.Lbss_bgn:  .long __bss_start
+.Lbss_end:  .long _end
+
+	.org	PARMAREA-64
+.Lduct:	.long	0,0,0,0,0,0,0,0
+	.long	0,0,0,0,0,0,0,0
+
+#
+# params at 10400 (setup.h)
+#
+	.org	PARMAREA
+	.global _pstart
+_pstart:
+	.long	0,0			# IPL_DEVICE
+	.long	0,RAMDISK_ORIGIN	# INITRD_START
+	.long	0,RAMDISK_SIZE		# INITRD_SIZE
+
+	.org	COMMAND_LINE
+	.byte	"root=/dev/ram0 ro"
+	.byte	0
+	.org	0x11000
+.Lsccb:
+	.hword	0x1000			# length, one page
+	.byte	0x00,0x00,0x00
+	.byte	0x80			# variable response bit set
+.Lsccbr:
+	.hword	0x00			# response code
+.Lscpincr1:
+	.hword	0x00
+.Lscpa1:
+	.byte	0x00
+	.fill	89,1,0
+.Lscpa2:
+	.int	0x00
+.Lscpincr2:
+	.quad	0x00
+	.fill	3984,1,0
+	.org	0x12000
+	.global	_pend
+_pend:
+
+	GET_IPL_DEVICE
+
+#ifdef CONFIG_SHARED_KERNEL
+	.org	0x100000
+#endif
+
+#
+# startup-code, running in virtual mode
+#
+	.globl	_stext
+_stext:	basr	%r13,0			# get base
+.LPG3:
+#
+# Setup stack
+#
+	l	%r15,.Linittu-.LPG3(%r13)
+	mvc	__LC_CURRENT(4),__TI_task(%r15)
+	ahi	%r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union+THREAD_SIZE
+	st	%r15,__LC_KERNEL_STACK	# set end of kernel stack
+	ahi	%r15,-96
+	xc	__SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain
+
+# check control registers
+	stctl	%c0,%c15,0(%r15)
+	oi	2(%r15),0x40		# enable sigp emergency signal
+	oi	0(%r15),0x10		# switch on low address protection
+	lctl	%c0,%c15,0(%r15)
+
+#
+	lam	0,15,.Laregs-.LPG3(%r13) # load access regs needed by uaccess
+	l	%r14,.Lstart-.LPG3(%r13)
+	basr	%r14,%r14		# call start_kernel
+#
+# We returned from start_kernel ?!? PANIK
+#
+	basr	%r13,0
+	lpsw	.Ldw-.(%r13)		# load disabled wait psw
+#
+	.align	8
+.Ldw:	.long	0x000a0000,0x00000000
+.Linittu:.long	init_thread_union
+.Lstart:.long	start_kernel
+.Laregs:.long	0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S
index c9ff0404c875..f08c06f45d5c 100644
--- a/arch/s390/kernel/head64.S
+++ b/arch/s390/kernel/head64.S
@@ -1,482 +1,17 @@
 /*
- *  arch/s390/kernel/head.S
+ * arch/s390/kernel/head64.S
  *
- *  S390 version
- *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Hartmut Penner (hp@de.ibm.com),
- *               Martin Schwidefsky (schwidefsky@de.ibm.com),
- *               Rob van der Heij (rvdhei@iae.nl)
+ * (C) Copyright IBM Corp. 1999,2005
+ *
+ *   Author(s):	Hartmut Penner <hp@de.ibm.com>
+ *		Martin Schwidefsky <schwidefsky@de.ibm.com>
+ *		Rob van der Heij <rvdhei@iae.nl>
+ *		Heiko Carstens <heiko.carstens@de.ibm.com>
  *
- * There are 5 different IPL methods
- *  1) load the image directly into ram at address 0 and do an PSW restart
- *  2) linload will load the image from address 0x10000 to memory 0x10000
- *     and start the code thru LPSW 0x0008000080010000 (VM only, deprecated)
- *  3) generate the tape ipl header, store the generated image on a tape
- *     and ipl from it
- *     In case of SL tape you need to IPL 5 times to get past VOL1 etc
- *  4) generate the vm reader ipl header, move the generated image to the
- *     VM reader (use option NOH!) and do a ipl from reader (VM only)
- *  5) direct call of start by the SALIPL loader
- *  We use the cpuid to distinguish between VM and native ipl
- *  params for kernel are pushed to 0x10400 (see setup.h)
-
-    Changes: 
-    Okt 25 2000 <rvdheij@iae.nl>
-	added code to skip HDR and EOF to allow SL tape IPL (5 retries)
-	changed first CCW from rewind to backspace block
-
  */
 
-#include <linux/config.h>
-#include <asm/setup.h>
-#include <asm/lowcore.h>
-#include <asm/asm-offsets.h>
-#include <asm/thread_info.h>
-#include <asm/page.h>
-
-#ifndef CONFIG_IPL
-        .org   0
-        .long  0x00080000,0x80000000+startup   # Just a restart PSW
-#else
-#ifdef CONFIG_IPL_TAPE
-#define IPL_BS 1024
-        .org   0
-        .long  0x00080000,0x80000000+iplstart  # The first 24 bytes are loaded
-        .long  0x27000000,0x60000001           # by ipl to addresses 0-23.
-        .long  0x02000000,0x20000000+IPL_BS    # (a PSW and two CCWs).
-        .long  0x00000000,0x00000000           # external old psw
-        .long  0x00000000,0x00000000           # svc old psw
-        .long  0x00000000,0x00000000           # program check old psw
-        .long  0x00000000,0x00000000           # machine check old psw
-        .long  0x00000000,0x00000000           # io old psw
-        .long  0x00000000,0x00000000
-        .long  0x00000000,0x00000000
-        .long  0x00000000,0x00000000
-        .long  0x000a0000,0x00000058           # external new psw
-        .long  0x000a0000,0x00000060           # svc new psw
-        .long  0x000a0000,0x00000068           # program check new psw
-        .long  0x000a0000,0x00000070           # machine check new psw
-        .long  0x00080000,0x80000000+.Lioint   # io new psw
-
-        .org   0x100
-#
-# subroutine for loading from tape
-# Paramters:	
-#  R1 = device number
-#  R2 = load address
-.Lloader:	
-        st    %r14,.Lldret
-        la    %r3,.Lorbread                    # r3 = address of orb 
-	la    %r5,.Lirb                        # r5 = address of irb
-        st    %r2,.Lccwread+4                  # initialize CCW data addresses
-        lctl  %c6,%c6,.Lcr6               
-        slr   %r2,%r2
-.Lldlp:
-        la    %r6,3                            # 3 retries
-.Lssch:
-        ssch  0(%r3)                           # load chunk of IPL_BS bytes
-        bnz   .Llderr
-.Lw4end:
-        bas   %r14,.Lwait4io
-        tm    8(%r5),0x82                      # do we have a problem ?
-        bnz   .Lrecov
-        slr   %r7,%r7
-        icm   %r7,3,10(%r5)                    # get residual count
-        lcr   %r7,%r7
-        la    %r7,IPL_BS(%r7)                  # IPL_BS-residual=#bytes read
-        ar    %r2,%r7                          # add to total size
-        tm    8(%r5),0x01                      # found a tape mark ?
-        bnz   .Ldone
-        l     %r0,.Lccwread+4                  # update CCW data addresses
-        ar    %r0,%r7
-        st    %r0,.Lccwread+4                
-        b     .Lldlp
-.Ldone:
-        l     %r14,.Lldret
-        br    %r14                             # r2 contains the total size
-.Lrecov:
-        bas   %r14,.Lsense                     # do the sensing
-        bct   %r6,.Lssch                       # dec. retry count & branch
-        b     .Llderr
-#
-# Sense subroutine
 #
-.Lsense:
-        st    %r14,.Lsnsret
-        la    %r7,.Lorbsense              
-        ssch  0(%r7)                           # start sense command
-        bnz   .Llderr
-        bas   %r14,.Lwait4io
-        l     %r14,.Lsnsret
-        tm    8(%r5),0x82                      # do we have a problem ?
-        bnz   .Llderr
-        br    %r14
-#
-# Wait for interrupt subroutine
-#
-.Lwait4io:
-        lpsw  .Lwaitpsw                 
-.Lioint:
-        c     %r1,0xb8                         # compare subchannel number
-        bne   .Lwait4io
-        tsch  0(%r5)
-        slr   %r0,%r0
-        tm    8(%r5),0x82                      # do we have a problem ?
-        bnz   .Lwtexit
-        tm    8(%r5),0x04                      # got device end ?
-        bz    .Lwait4io
-.Lwtexit:
-        br    %r14
-.Llderr:
-        lpsw  .Lcrash              
-
-        .align 8
-.Lorbread:
-	.long  0x00000000,0x0080ff00,.Lccwread
-        .align 8
-.Lorbsense:
-        .long  0x00000000,0x0080ff00,.Lccwsense
-        .align 8
-.Lccwread:
-        .long  0x02200000+IPL_BS,0x00000000
-.Lccwsense:
-        .long  0x04200001,0x00000000
-.Lwaitpsw:
-	.long  0x020a0000,0x80000000+.Lioint
-
-.Lirb:	.long  0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-.Lcr6:  .long  0xff000000
-        .align 8
-.Lcrash:.long  0x000a0000,0x00000000
-.Lldret:.long  0
-.Lsnsret: .long 0
-#endif  /* CONFIG_IPL_TAPE */
-
-#ifdef CONFIG_IPL_VM
-#define IPL_BS 0x730
-        .org   0
-        .long  0x00080000,0x80000000+iplstart  # The first 24 bytes are loaded
-        .long  0x02000018,0x60000050           # by ipl to addresses 0-23.
-        .long  0x02000068,0x60000050           # (a PSW and two CCWs).
-        .fill  80-24,1,0x40                    # bytes 24-79 are discarded !!
-        .long  0x020000f0,0x60000050           # The next 160 byte are loaded
-        .long  0x02000140,0x60000050           # to addresses 0x18-0xb7
-        .long  0x02000190,0x60000050           # They form the continuation
-        .long  0x020001e0,0x60000050           # of the CCW program started
-        .long  0x02000230,0x60000050           # by ipl and load the range
-        .long  0x02000280,0x60000050           # 0x0f0-0x730 from the image
-        .long  0x020002d0,0x60000050           # to the range 0x0f0-0x730
-        .long  0x02000320,0x60000050           # in memory. At the end of
-        .long  0x02000370,0x60000050           # the channel program the PSW
-        .long  0x020003c0,0x60000050           # at location 0 is loaded.
-        .long  0x02000410,0x60000050           # Initial processing starts
-        .long  0x02000460,0x60000050           # at 0xf0 = iplstart.
-        .long  0x020004b0,0x60000050
-        .long  0x02000500,0x60000050
-        .long  0x02000550,0x60000050
-        .long  0x020005a0,0x60000050
-        .long  0x020005f0,0x60000050
-        .long  0x02000640,0x60000050
-        .long  0x02000690,0x60000050
-        .long  0x020006e0,0x20000050
-
-        .org   0xf0
-#
-# subroutine for loading cards from the reader
-#
-.Lloader:	
-	la    %r3,.Lorb                        # r2 = address of orb into r2
-	la    %r5,.Lirb                        # r4 = address of irb
-        la    %r6,.Lccws              
-        la    %r7,20
-.Linit:
-        st    %r2,4(%r6)                       # initialize CCW data addresses
-        la    %r2,0x50(%r2)
-        la    %r6,8(%r6)
-        bct   7,.Linit
-
-        lctl  %c6,%c6,.Lcr6                    # set IO subclass mask
-	slr   %r2,%r2
-.Lldlp:
-        ssch  0(%r3)                           # load chunk of 1600 bytes
-        bnz   .Llderr
-.Lwait4irq:
-        mvc   0x78(8),.Lnewpsw                 # set up IO interrupt psw
-        lpsw  .Lwaitpsw              
-.Lioint:
-        c     %r1,0xb8                         # compare subchannel number
-	bne   .Lwait4irq
-	tsch  0(%r5)
-
-	slr   %r0,%r0
-	ic    %r0,8(%r5)                       # get device status
-	chi   %r0,8                            # channel end ?
-	be    .Lcont
-	chi   %r0,12                           # channel end + device end ?
-	be    .Lcont
-
-        l     %r0,4(%r5)
-        s     %r0,8(%r3)                       # r0/8 = number of ccws executed
-        mhi   %r0,10                           # *10 = number of bytes in ccws
-        lh    %r3,10(%r5)                      # get residual count
-        sr    %r0,%r3                          # #ccws*80-residual=#bytes read
-	ar    %r2,%r0
-	
-        br    %r14                             # r2 contains the total size
-
-.Lcont:
-	ahi   %r2,0x640                        # add 0x640 to total size
-        la    %r6,.Lccws             
-        la    %r7,20
-.Lincr:
-        l     %r0,4(%r6)                       # update CCW data addresses
-        ahi   %r0,0x640
-        st    %r0,4(%r6)
-        ahi   %r6,8
-        bct   7,.Lincr
-
-        b     .Lldlp
-.Llderr:
-        lpsw  .Lcrash              
-
-        .align 8
-.Lorb:	.long  0x00000000,0x0080ff00,.Lccws
-.Lirb:	.long  0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-.Lcr6:  .long  0xff000000
-.Lloadp:.long  0,0
-        .align 8
-.Lcrash:.long  0x000a0000,0x00000000
-.Lnewpsw:
-        .long  0x00080000,0x80000000+.Lioint
-.Lwaitpsw:
-        .long  0x020a0000,0x80000000+.Lioint
-
-        .align 8
-.Lccws: .rept  19
-        .long  0x02600050,0x00000000
-        .endr
-        .long  0x02200050,0x00000000
-#endif  /* CONFIG_IPL_VM */
-
-iplstart:
-        lh    %r1,0xb8                         # test if subchannel number
-        bct   %r1,.Lnoload                     #  is valid
-	l     %r1,0xb8                         # load ipl subchannel number
-        la    %r2,IPL_BS                       # load start address
-        bas   %r14,.Lloader                    # load rest of ipl image
-        larl  %r12,_pstart                     # pointer to parameter area
-        st    %r1,IPL_DEVICE+4-PARMAREA(%r12)  # store ipl device number
-
-#
-# load parameter file from ipl device
-#
-.Lagain1:
- 	l     %r2,INITRD_START+4-PARMAREA(%r12)# use ramdisk location as temp
-        bas   %r14,.Lloader                    # load parameter file
-        ltr   %r2,%r2                          # got anything ?
-        bz    .Lnopf
-	chi   %r2,895
-	bnh   .Lnotrunc
-	la    %r2,895
-.Lnotrunc:
-	l     %r4,INITRD_START+4-PARMAREA(%r12)
- 	clc   0(3,%r4),.L_hdr		       # if it is HDRx
- 	bz    .Lagain1			       # skip dataset header
- 	clc   0(3,%r4),.L_eof		       # if it is EOFx
- 	bz    .Lagain1			       # skip dateset trailer
-        la    %r5,0(%r4,%r2)
-        lr    %r3,%r2
-.Lidebc:
-        tm    0(%r5),0x80                      # high order bit set ?
-        bo    .Ldocv                           #  yes -> convert from EBCDIC
-        ahi   %r5,-1
-        bct   %r3,.Lidebc
-        b     .Lnocv
-.Ldocv:
-        l     %r3,.Lcvtab
-        tr    0(256,%r4),0(%r3)                # convert parameters to ascii
-        tr    256(256,%r4),0(%r3)
-        tr    512(256,%r4),0(%r3)
-        tr    768(122,%r4),0(%r3)
-.Lnocv: la    %r3,COMMAND_LINE-PARMAREA(%r12)  # load adr. of command line
-	mvc   0(256,%r3),0(%r4)
-	mvc   256(256,%r3),256(%r4)
-	mvc   512(256,%r3),512(%r4)
-	mvc   768(122,%r3),768(%r4)
-        slr   %r0,%r0
-        b     .Lcntlp
-.Ldelspc:
-        ic    %r0,0(%r2,%r3)
-        chi   %r0,0x20                         # is it a space ?
-        be    .Lcntlp
-        ahi   %r2,1
-        b     .Leolp
-.Lcntlp:
-        brct  %r2,.Ldelspc
-.Leolp:
-        slr   %r0,%r0
-        stc   %r0,0(%r2,%r3)                   # terminate buffer
-.Lnopf:
-
-#
-# load ramdisk from ipl device
-#
-.Lagain2:
- 	l     %r2,INITRD_START+4-PARMAREA(%r12)# load adr. of ramdisk
-        bas   %r14,.Lloader                    # load ramdisk
- 	st    %r2,INITRD_SIZE+4-PARMAREA(%r12) # store size of ramdisk
-        ltr   %r2,%r2
-        bnz   .Lrdcont
-        st    %r2,INITRD_START+4-PARMAREA(%r12)# no ramdisk found, null it
-.Lrdcont:
-	l     %r2,INITRD_START+4-PARMAREA(%r12)
-	clc   0(3,%r2),.L_hdr		       # skip HDRx and EOFx 
-	bz    .Lagain2
-	clc   0(3,%r2),.L_eof
-	bz    .Lagain2
-
-#ifdef CONFIG_IPL_VM
-#
-# reset files in VM reader
-#
-        stidp __LC_CPUID                       # store cpuid
-	tm    __LC_CPUID,0xff                  # running VM ?
-	bno   .Lnoreset
-        la    %r2,.Lreset              
-        lhi   %r3,26
-	diag  %r2,%r3,8
-	la    %r5,.Lirb
-	stsch 0(%r5)			       # check if irq is pending
-	tm    30(%r5),0x0f		       # by verifying if any of the
-	bnz   .Lwaitforirq		       # activity or status control
-	tm    31(%r5),0xff		       # bits is set in the schib
-	bz    .Lnoreset
-.Lwaitforirq:
-	mvc   0x78(8),.Lrdrnewpsw	       # set up IO interrupt psw
-.Lwaitrdrirq:
-	lpsw  .Lrdrwaitpsw
-.Lrdrint:
-	c     %r1,0xb8			       # compare subchannel number
-	bne   .Lwaitrdrirq
-	la    %r5,.Lirb
-	tsch  0(%r5)
-.Lnoreset:
-	b     .Lnoload
-
-	.align 8
-.Lrdrnewpsw:
-	.long  0x00080000,0x80000000+.Lrdrint
-.Lrdrwaitpsw:
-	.long  0x020a0000,0x80000000+.Lrdrint
-#endif
-
-#
-# everything loaded, go for it
-#
-.Lnoload:
-        l     %r1,.Lstartup
-        br    %r1
-
-.Lstartup: .long startup
-.Lcvtab:.long  _ebcasc                         # ebcdic to ascii table
-.Lreset:.byte  0xc3,0xc8,0xc1,0xd5,0xc7,0xc5,0x40,0xd9,0xc4,0xd9,0x40
-        .byte  0xc1,0xd3,0xd3,0x40,0xd2,0xc5,0xc5,0xd7,0x40,0xd5,0xd6
-        .byte  0xc8,0xd6,0xd3,0xc4             # "change rdr all keep nohold"
-.L_eof: .long  0xc5d6c600       /* C'EOF' */
-.L_hdr: .long  0xc8c4d900       /* C'HDR' */
-#endif  /* CONFIG_IPL */
-
-#
-# SALIPL loader support. Based on a patch by Rob van der Heij.
-# This entry point is called directly from the SALIPL loader and
-# doesn't need a builtin ipl record.
-#
-        .org  0x800
-	.globl start
-start:
-	stm   %r0,%r15,0x07b0		# store registers
-	basr  %r12,%r0
-.base:
-	l     %r11,.parm
-	l     %r8,.cmd			# pointer to command buffer
-
-	ltr   %r9,%r9			# do we have SALIPL parameters?
-	bp    .sk8x8
-
-	mvc   0(64,%r8),0x00b0		# copy saved registers
-	xc    64(240-64,%r8),0(%r8)	# remainder of buffer
-	tr    0(64,%r8),.lowcase	
-	b     .gotr
-.sk8x8:
-	mvc   0(240,%r8),0(%r9)		# copy iplparms into buffer
-.gotr:
-	l     %r10,.tbl			# EBCDIC to ASCII table
-	tr    0(240,%r8),0(%r10)
-	stidp __LC_CPUID		# Are we running on VM maybe
-	cli   __LC_CPUID,0xff
-	bnz   .test
-	.long 0x83300060		# diag 3,0,x'0060' - storage size
-	b     .done
-.test:
-	mvc   0x68(8),.pgmnw		# set up pgm check handler
-	l     %r2,.fourmeg
-	lr    %r3,%r2
-	bctr  %r3,%r0			# 4M-1
-.loop:  iske  %r0,%r3
-	ar    %r3,%r2
-.pgmx:
-	sr    %r3,%r2
-	la    %r3,1(%r3)
-.done:
-	l     %r1,.memsize
-	st    %r3,4(%r1)
-	slr   %r0,%r0
-	st    %r0,INITRD_SIZE+4-PARMAREA(%r11)
-	st    %r0,INITRD_START+4-PARMAREA(%r11)
-	j     startup                   # continue with startup
-.tbl:	.long _ebcasc			# translate table
-.cmd:	.long COMMAND_LINE		# address of command line buffer
-.parm:	.long PARMAREA
-.fourmeg: .long 0x00400000      	# 4M
-.pgmnw:	.long 0x00080000,.pgmx
-.memsize: .long memory_size
-.lowcase:
-	.byte 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07 
-	.byte 0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f
-	.byte 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17 
-	.byte 0x18,0x19,0x1a,0x1b,0x1c,0x1d,0x1e,0x1f
-	.byte 0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27 
-	.byte 0x28,0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f
-	.byte 0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x37 
-	.byte 0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f
-	.byte 0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47 
-	.byte 0x48,0x49,0x4a,0x4b,0x4c,0x4d,0x4e,0x4f
-	.byte 0x50,0x51,0x52,0x53,0x54,0x55,0x56,0x57 
-	.byte 0x58,0x59,0x5a,0x5b,0x5c,0x5d,0x5e,0x5f
-	.byte 0x60,0x61,0x62,0x63,0x64,0x65,0x66,0x67 
-	.byte 0x68,0x69,0x6a,0x6b,0x6c,0x6d,0x6e,0x6f
-	.byte 0x70,0x71,0x72,0x73,0x74,0x75,0x76,0x77 
-	.byte 0x78,0x79,0x7a,0x7b,0x7c,0x7d,0x7e,0x7f
-
-	.byte 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87 
-	.byte 0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f
-	.byte 0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97 
-	.byte 0x98,0x99,0x9a,0x9b,0x9c,0x9d,0x9e,0x9f
-	.byte 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7 
-	.byte 0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf
-	.byte 0xb0,0xb1,0xb2,0xb3,0xb4,0xb5,0xb6,0xb7 
-	.byte 0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0xbe,0xbf
-	.byte 0xc0,0x81,0x82,0x83,0x84,0x85,0x86,0x87	# .abcdefg 
-	.byte 0x88,0x89,0xca,0xcb,0xcc,0xcd,0xce,0xcf	# hi
-	.byte 0xd0,0x91,0x92,0x93,0x94,0x95,0x96,0x97 	# .jklmnop
-	.byte 0x98,0x99,0xda,0xdb,0xdc,0xdd,0xde,0xdf	# qr
-	.byte 0xe0,0xe1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7	# ..stuvwx
-	.byte 0xa8,0xa9,0xea,0xeb,0xec,0xed,0xee,0xef	# yz
-	.byte 0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7 
-	.byte 0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfe,0xff
-
-#
-# startup-code at 0x10000, running in real mode
+# startup-code at 0x10000, running in absolute addressing mode
 # this is called either by the ipl loader or directly by PSW restart
 # or linload or SALIPL
 #
@@ -484,6 +19,8 @@ start:
 startup:basr  %r13,0                     # get base
 .LPG1:  sll   %r13,1                     # remove high order bit
         srl   %r13,1
+	l     %r1,.Lget_ipl_device_addr-.LPG1(%r13)
+	basr  %r14,%r1
         lhi   %r1,1                      # mode 1 = esame
         slr   %r0,%r0                    # set cpuid to zero
         sigp  %r1,%r0,0x12               # switch to esame mode
@@ -528,7 +65,7 @@ startup:basr  %r13,0                     # get base
 	be    .Lfchunk-.LPG1(%r13)	# leave
 	chi   %r1,2
 	be    .Lservicecall-.LPG1(%r13)
-	lpsw  .Lwaitsclp-.LPG1(%r13)
+	lpswe .Lwaitsclp-.LPG1(%r13)
 .Lsclph:
 	lh    %r1,.Lsccbr-PARMAREA(%r4)
 	chi   %r1,0x10			# 0x0010 is the sucess code
@@ -556,14 +93,16 @@ startup:basr  %r13,0                     # get base
 	mlgr  %r2,%r1			# mem size in bytes in %r3
 	b     .Lfchunk-.LPG1(%r13)
 
+	.align 4
+.Lget_ipl_device_addr:
+	.long .Lget_ipl_device
 .Lpmask:
 	.byte 0
 	.align 8
 .Lcr:
 	.quad 0x00  # place holder for cr0
 .Lwaitsclp:
-	.long 0x020A0000
-	.quad .Lsclph
+	.quad  0x0102000180000000,.Lsclph
 .Lrcp:
 	.int 0x00120001 # Read SCP forced code
 .Lrcp2:
@@ -746,6 +285,8 @@ _pstart:
 	.global _pend
 _pend:	
 
+	GET_IPL_DEVICE
+
 #ifdef CONFIG_SHARED_KERNEL
 	.org   0x100000
 #endif
@@ -755,7 +296,7 @@ _pend:
 #
         .globl _stext
 _stext:	basr  %r13,0                    # get base
-.LPG2:
+.LPG3:
 #
 # Setup stack
 #
@@ -774,7 +315,7 @@ _stext:	basr  %r13,0                    # get base
         lctlg  %c0,%c15,0(%r15)
 
 #
-        lam    0,15,.Laregs-.LPG2(%r13) # load access regs needed by uaccess
+        lam    0,15,.Laregs-.LPG3(%r13) # load access regs needed by uaccess
         brasl  %r14,start_kernel        # go to C code
 #
 # We returned from start_kernel ?!? PANIK
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index 9f3dff6c0b72..78b64fe5e7c2 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -99,15 +99,15 @@ void default_idle(void)
 {
 	int cpu, rc;
 
+	/* CPU is going idle. */
+	cpu = smp_processor_id();
+
 	local_irq_disable();
-        if (need_resched()) {
+	if (need_resched()) {
 		local_irq_enable();
-                schedule();
-                return;
-        }
+		return;
+	}
 
-	/* CPU is going idle. */
-	cpu = smp_processor_id();
 	rc = notifier_call_chain(&idle_chain, CPU_IDLE, (void *)(long) cpu);
 	if (rc != NOTIFY_OK && rc != NOTIFY_DONE)
 		BUG();
@@ -120,7 +120,7 @@ void default_idle(void)
 	__ctl_set_bit(8, 15);
 
 #ifdef CONFIG_HOTPLUG_CPU
-	if (cpu_is_offline(smp_processor_id()))
+	if (cpu_is_offline(cpu))
 		cpu_die();
 #endif
 
@@ -139,8 +139,14 @@ void default_idle(void)
 
 void cpu_idle(void)
 {
-	for (;;)
-		default_idle();
+	for (;;) {
+		while (!need_resched())
+			default_idle();
+
+		preempt_enable_no_resched();
+		schedule();
+		preempt_disable();
+	}
 }
 
 void show_regs(struct pt_regs *regs)
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 5204778b8e5e..31e7b19348b7 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -36,6 +36,7 @@
 #include <linux/console.h>
 #include <linux/seq_file.h>
 #include <linux/kernel_stat.h>
+#include <linux/device.h>
 
 #include <asm/uaccess.h>
 #include <asm/system.h>
@@ -685,3 +686,188 @@ struct seq_operations cpuinfo_op = {
 	.show	= show_cpuinfo,
 };
 
+#define DEFINE_IPL_ATTR(_name, _format, _value)			\
+static ssize_t ipl_##_name##_show(struct subsystem *subsys,	\
+		char *page)					\
+{								\
+	return sprintf(page, _format, _value);			\
+}								\
+static struct subsys_attribute ipl_##_name##_attr =		\
+	__ATTR(_name, S_IRUGO, ipl_##_name##_show, NULL);
+
+DEFINE_IPL_ATTR(wwpn, "0x%016llx\n", (unsigned long long)
+		IPL_PARMBLOCK_START->fcp.wwpn);
+DEFINE_IPL_ATTR(lun, "0x%016llx\n", (unsigned long long)
+		IPL_PARMBLOCK_START->fcp.lun);
+DEFINE_IPL_ATTR(bootprog, "%lld\n", (unsigned long long)
+		IPL_PARMBLOCK_START->fcp.bootprog);
+DEFINE_IPL_ATTR(br_lba, "%lld\n", (unsigned long long)
+		IPL_PARMBLOCK_START->fcp.br_lba);
+
+enum ipl_type_type {
+	ipl_type_unknown,
+	ipl_type_ccw,
+	ipl_type_fcp,
+};
+
+static enum ipl_type_type
+get_ipl_type(void)
+{
+	struct ipl_parameter_block *ipl = IPL_PARMBLOCK_START;
+
+	if (!IPL_DEVNO_VALID)
+		return ipl_type_unknown;
+	if (!IPL_PARMBLOCK_VALID)
+		return ipl_type_ccw;
+	if (ipl->hdr.header.version > IPL_MAX_SUPPORTED_VERSION)
+		return ipl_type_unknown;
+	if (ipl->fcp.pbt != IPL_TYPE_FCP)
+		return ipl_type_unknown;
+	return ipl_type_fcp;
+}
+
+static ssize_t
+ipl_type_show(struct subsystem *subsys, char *page)
+{
+	switch (get_ipl_type()) {
+	case ipl_type_ccw:
+		return sprintf(page, "ccw\n");
+	case ipl_type_fcp:
+		return sprintf(page, "fcp\n");
+	default:
+		return sprintf(page, "unknown\n");
+	}
+}
+
+static struct subsys_attribute ipl_type_attr = __ATTR_RO(ipl_type);
+
+static ssize_t
+ipl_device_show(struct subsystem *subsys, char *page)
+{
+	struct ipl_parameter_block *ipl = IPL_PARMBLOCK_START;
+
+	switch (get_ipl_type()) {
+	case ipl_type_ccw:
+		return sprintf(page, "0.0.%04x\n", ipl_devno);
+	case ipl_type_fcp:
+		return sprintf(page, "0.0.%04x\n", ipl->fcp.devno);
+	default:
+		return 0;
+	}
+}
+
+static struct subsys_attribute ipl_device_attr =
+	__ATTR(device, S_IRUGO, ipl_device_show, NULL);
+
+static struct attribute *ipl_fcp_attrs[] = {
+	&ipl_type_attr.attr,
+	&ipl_device_attr.attr,
+	&ipl_wwpn_attr.attr,
+	&ipl_lun_attr.attr,
+	&ipl_bootprog_attr.attr,
+	&ipl_br_lba_attr.attr,
+	NULL,
+};
+
+static struct attribute_group ipl_fcp_attr_group = {
+	.attrs = ipl_fcp_attrs,
+};
+
+static struct attribute *ipl_ccw_attrs[] = {
+	&ipl_type_attr.attr,
+	&ipl_device_attr.attr,
+	NULL,
+};
+
+static struct attribute_group ipl_ccw_attr_group = {
+	.attrs = ipl_ccw_attrs,
+};
+
+static struct attribute *ipl_unknown_attrs[] = {
+	&ipl_type_attr.attr,
+	NULL,
+};
+
+static struct attribute_group ipl_unknown_attr_group = {
+	.attrs = ipl_unknown_attrs,
+};
+
+static ssize_t
+ipl_parameter_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
+{
+	unsigned int size = IPL_PARMBLOCK_SIZE;
+
+	if (off > size)
+		return 0;
+	if (off + count > size)
+		count = size - off;
+
+	memcpy(buf, (void *) IPL_PARMBLOCK_START + off, count);
+	return count;
+}
+
+static struct bin_attribute ipl_parameter_attr = {
+	.attr = {
+		.name = "binary_parameter",
+		.mode = S_IRUGO,
+		.owner = THIS_MODULE,
+	},
+	.size = PAGE_SIZE,
+	.read = &ipl_parameter_read,
+};
+
+static ssize_t
+ipl_scp_data_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
+{
+	unsigned int size =  IPL_PARMBLOCK_START->fcp.scp_data_len;
+	void *scp_data = &IPL_PARMBLOCK_START->fcp.scp_data;
+
+	if (off > size)
+		return 0;
+	if (off + count > size)
+		count = size - off;
+
+	memcpy(buf, scp_data + off, count);
+	return count;
+}
+
+static struct bin_attribute ipl_scp_data_attr = {
+	.attr = {
+		.name = "scp_data",
+		.mode = S_IRUGO,
+		.owner = THIS_MODULE,
+	},
+	.size = PAGE_SIZE,
+	.read = &ipl_scp_data_read,
+};
+
+static decl_subsys(ipl, NULL, NULL);
+
+static int __init
+ipl_device_sysfs_register(void) {
+	int rc;
+
+	rc = firmware_register(&ipl_subsys);
+	if (rc)
+		return rc;
+
+	switch (get_ipl_type()) {
+	case ipl_type_ccw:
+		sysfs_create_group(&ipl_subsys.kset.kobj, &ipl_ccw_attr_group);
+		break;
+	case ipl_type_fcp:
+		sysfs_create_group(&ipl_subsys.kset.kobj, &ipl_fcp_attr_group);
+		sysfs_create_bin_file(&ipl_subsys.kset.kobj,
+				      &ipl_parameter_attr);
+		sysfs_create_bin_file(&ipl_subsys.kset.kobj,
+				      &ipl_scp_data_attr);
+		break;
+	default:
+		sysfs_create_group(&ipl_subsys.kset.kobj,
+				   &ipl_unknown_attr_group);
+		break;
+	}
+	return 0;
+}
+
+__initcall(ipl_device_sysfs_register);
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index 6a3f5b7473a9..6e0110d71191 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -376,8 +376,8 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 
 	/* Create the ucontext.  */
 	err |= __put_user(0, &frame->uc.uc_flags);
-	err |= __put_user(0, &frame->uc.uc_link);
-	err |= __put_user((void *)current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
+	err |= __put_user(NULL, &frame->uc.uc_link);
+	err |= __put_user((void __user *)current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
 	err |= __put_user(sas_ss_flags(regs->gprs[15]),
 			  &frame->uc.uc_stack.ss_flags);
 	err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index e13c87b446b2..5856b3fda6bf 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -533,6 +533,7 @@ int __devinit start_secondary(void *cpuvoid)
 {
         /* Setup the cpu */
         cpu_init();
+	preempt_disable();
         /* init per CPU timer */
         init_cpu_timer();
 #ifdef CONFIG_VIRT_TIMER
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index 2fd75da15495..c36353e8c140 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -49,10 +49,6 @@
 
 #define TICK_SIZE tick
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 static ext_int_info_t ext_int_info_cc;
 static u64 init_timer_cc;
 static u64 jiffies_timer_cc;
@@ -241,6 +237,8 @@ int sysctl_hz_timer = 1;
  */
 static inline void stop_hz_timer(void)
 {
+	unsigned long flags;
+	unsigned long seq, next;
 	__u64 timer, todval;
 
 	if (sysctl_hz_timer != 0)
@@ -261,7 +259,11 @@ static inline void stop_hz_timer(void)
 	 * This cpu is going really idle. Set up the clock comparator
 	 * for the next event.
 	 */
-	timer = (__u64) (next_timer_interrupt() - jiffies) + jiffies_64;
+	next = next_timer_interrupt();
+	do {
+		seq = read_seqbegin_irqsave(&xtime_lock, flags);
+		timer = (__u64)(next - jiffies) + jiffies_64;
+	} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
 	todval = -1ULL;
 	/* Be careful about overflows. */
 	if (timer < (-1ULL / CLK_TICKS_PER_JIFFY)) {
diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c
index 6b8703ec2ae6..c5bd36fae56b 100644
--- a/arch/s390/kernel/traps.c
+++ b/arch/s390/kernel/traps.c
@@ -57,7 +57,6 @@ int sysctl_userprocess_debug = 0;
 
 extern pgm_check_handler_t do_protection_exception;
 extern pgm_check_handler_t do_dat_exception;
-extern pgm_check_handler_t do_pseudo_page_fault;
 #ifdef CONFIG_PFAULT
 extern int pfault_init(void);
 extern void pfault_fini(void);
@@ -676,20 +675,6 @@ asmlinkage void kernel_stack_overflow(struct pt_regs * regs)
 	panic("Corrupt kernel stack, can't continue.");
 }
 
-#ifndef CONFIG_ARCH_S390X
-static int
-pagex_reboot_event(struct notifier_block *this, unsigned long event, void *ptr)
-{
-	if (MACHINE_IS_VM)
-		cpcmd("SET PAGEX OFF", NULL, 0, NULL);
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block pagex_reboot_notifier = {
-	.notifier_call = &pagex_reboot_event,
-};
-#endif
-
 /* init is done in lowcore.S and head.S */
 
 void __init trap_init(void)
@@ -717,9 +702,7 @@ void __init trap_init(void)
         pgm_check_table[0x11] = &do_dat_exception;
         pgm_check_table[0x12] = &translation_exception;
         pgm_check_table[0x13] = &special_op_exception;
-#ifndef CONFIG_ARCH_S390X
- 	pgm_check_table[0x14] = &do_pseudo_page_fault;
-#else /* CONFIG_ARCH_S390X */
+#ifdef CONFIG_ARCH_S390X
         pgm_check_table[0x38] = &do_dat_exception;
 	pgm_check_table[0x39] = &do_dat_exception;
 	pgm_check_table[0x3A] = &do_dat_exception;
@@ -731,12 +714,10 @@ void __init trap_init(void)
 	pgm_check_table[0x40] = &do_monitor_call;
 
 	if (MACHINE_IS_VM) {
+#ifdef CONFIG_PFAULT
 		/*
-		 * First try to get pfault pseudo page faults going.
-		 * If this isn't available turn on pagex page faults.
+		 * Try to get pfault pseudo page faults going.
 		 */
-#ifdef CONFIG_PFAULT
-		/* request the 0x2603 external interrupt */
 		if (register_early_external_interrupt(0x2603, pfault_interrupt,
 						      &ext_int_pfault) != 0)
 			panic("Couldn't request external interrupt 0x2603");
@@ -748,9 +729,5 @@ void __init trap_init(void)
 		unregister_early_external_interrupt(0x2603, pfault_interrupt,
 						    &ext_int_pfault);
 #endif
-#ifndef CONFIG_ARCH_S390X
-		register_reboot_notifier(&pagex_reboot_notifier);
-		cpcmd("SET PAGEX ON", NULL, 0, NULL);
-#endif
 	}
 }
diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index fa0726507b3d..22a895ecb7a4 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -24,7 +24,6 @@
 #include <asm/s390_ext.h>
 #include <asm/timer.h>
 
-#define VTIMER_MAGIC (TIMER_MAGIC + 1)
 static ext_int_info_t ext_int_info_timer;
 DEFINE_PER_CPU(struct vtimer_queue, virt_cpu_timer);
 
@@ -277,20 +276,12 @@ static void do_cpu_timer_interrupt(struct pt_regs *regs, __u16 error_code)
 
 void init_virt_timer(struct vtimer_list *timer)
 {
-	timer->magic = VTIMER_MAGIC;
 	timer->function = NULL;
 	INIT_LIST_HEAD(&timer->entry);
 	spin_lock_init(&timer->lock);
 }
 EXPORT_SYMBOL(init_virt_timer);
 
-static inline int check_vtimer(struct vtimer_list *timer)
-{
-	if (timer->magic != VTIMER_MAGIC)
-		return -EINVAL;
-	return 0;
-}
-
 static inline int vtimer_pending(struct vtimer_list *timer)
 {
 	return (!list_empty(&timer->entry));
@@ -346,7 +337,7 @@ static void internal_add_vtimer(struct vtimer_list *timer)
 
 static inline int prepare_vtimer(struct vtimer_list *timer)
 {
-	if (check_vtimer(timer) || !timer->function) {
+	if (!timer->function) {
 		printk("add_virt_timer: uninitialized timer\n");
 		return -EINVAL;
 	}
@@ -414,7 +405,7 @@ int mod_virt_timer(struct vtimer_list *timer, __u64 expires)
 	unsigned long flags;
 	int cpu;
 
-	if (check_vtimer(timer) || !timer->function) {
+	if (!timer->function) {
 		printk("mod_virt_timer: uninitialized timer\n");
 		return	-EINVAL;
 	}
@@ -481,11 +472,6 @@ int del_virt_timer(struct vtimer_list *timer)
 	unsigned long flags;
 	struct vtimer_queue *vt_list;
 
-	if (check_vtimer(timer)) {
-		printk("del_virt_timer: timer not initialized\n");
-		return -EINVAL;
-	}
-
 	/* check if timer is pending */
 	if (!vtimer_pending(timer))
 		return 0;
diff --git a/arch/s390/mm/extmem.c b/arch/s390/mm/extmem.c
index c5348108ca3c..506a33b51e4f 100644
--- a/arch/s390/mm/extmem.c
+++ b/arch/s390/mm/extmem.c
@@ -234,8 +234,8 @@ query_segment_type (struct dcss_segment *seg)
 	rc = 0;
 
  out_free:
-	if (qin) kfree(qin);
-	if (qout) kfree(qout);
+	kfree(qin);
+	kfree(qout);
 	return rc;
 }
 
@@ -394,7 +394,7 @@ __segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned long
 				segtype_string[seg->vm_segtype]);
 	goto out;
  out_free:
-	kfree (seg);
+	kfree(seg);
  out:
 	return rc;
 }
@@ -505,7 +505,7 @@ segment_modify_shared (char *name, int do_nonshared)
 	list_del(&seg->list);
 	dcss_diag(DCSS_PURGESEG, seg->dcss_name,
 		  &dummy, &dummy);
-	kfree (seg);
+	kfree(seg);
  out_unlock:
 	spin_unlock(&dcss_lock);
 	return rc;
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index 856a971759b1..fb2607c369ed 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -160,7 +160,7 @@ static void do_sigsegv(struct pt_regs *regs, unsigned long error_code,
  *   11       Page translation     ->  Not present       (nullification)
  *   3b       Region third trans.  ->  Not present       (nullification)
  */
-extern inline void
+static inline void
 do_exception(struct pt_regs *regs, unsigned long error_code, int is_protection)
 {
         struct task_struct *tsk;
@@ -352,115 +352,6 @@ void do_dat_exception(struct pt_regs *regs, unsigned long error_code)
 	do_exception(regs, error_code & 0xff, 0);
 }
 
-#ifndef CONFIG_ARCH_S390X
-
-typedef struct _pseudo_wait_t {
-       struct _pseudo_wait_t *next;
-       wait_queue_head_t queue;
-       unsigned long address;
-       int resolved;
-} pseudo_wait_t;
-
-static pseudo_wait_t *pseudo_lock_queue = NULL;
-static spinlock_t pseudo_wait_spinlock; /* spinlock to protect lock queue */
-
-/*
- * This routine handles 'pagex' pseudo page faults.
- */
-asmlinkage void
-do_pseudo_page_fault(struct pt_regs *regs, unsigned long error_code)
-{
-        pseudo_wait_t wait_struct;
-        pseudo_wait_t *ptr, *last, *next;
-        unsigned long address;
-
-        /*
-         * get the failing address
-         * more specific the segment and page table portion of
-         * the address
-         */
-        address = S390_lowcore.trans_exc_code & 0xfffff000;
-
-        if (address & 0x80000000) {
-                /* high bit set -> a page has been swapped in by VM */
-                address &= 0x7fffffff;
-                spin_lock(&pseudo_wait_spinlock);
-                last = NULL;
-                ptr = pseudo_lock_queue;
-                while (ptr != NULL) {
-                        next = ptr->next;
-                        if (address == ptr->address) {
-				 /*
-                                 * This is one of the processes waiting
-                                 * for the page. Unchain from the queue.
-                                 * There can be more than one process
-                                 * waiting for the same page. VM presents
-                                 * an initial and a completion interrupt for
-                                 * every process that tries to access a 
-                                 * page swapped out by VM. 
-                                 */
-                                if (last == NULL)
-                                        pseudo_lock_queue = next;
-                                else
-                                        last->next = next;
-                                /* now wake up the process */
-                                ptr->resolved = 1;
-                                wake_up(&ptr->queue);
-                        } else
-                                last = ptr;
-                        ptr = next;
-                }
-                spin_unlock(&pseudo_wait_spinlock);
-        } else {
-                /* Pseudo page faults in kernel mode is a bad idea */
-                if (!(regs->psw.mask & PSW_MASK_PSTATE)) {
-                        /*
-			 * VM presents pseudo page faults if the interrupted
-			 * state was not disabled for interrupts. So we can
-			 * get pseudo page fault interrupts while running
-			 * in kernel mode. We simply access the page here
-			 * while we are running disabled. VM will then swap
-			 * in the page synchronously.
-                         */
-                         if (check_user_space(regs, error_code) == 0)
-                                 /* dereference a virtual kernel address */
-                                 __asm__ __volatile__ (
-                                         "  ic 0,0(%0)"
-                                         : : "a" (address) : "0");
-                         else
-                                 /* dereference a virtual user address */
-                                 __asm__ __volatile__ (
-                                         "  la   2,0(%0)\n"
-                                         "  sacf 512\n"
-                                         "  ic   2,0(2)\n"
-					 "0:sacf 0\n"
-					 ".section __ex_table,\"a\"\n"
-					 "  .align 4\n"
-					 "  .long  0b,0b\n"
-					 ".previous"
-                                         : : "a" (address) : "2" );
-
-                        return;
-                }
-		/* initialize and add element to pseudo_lock_queue */
-                init_waitqueue_head (&wait_struct.queue);
-                wait_struct.address = address;
-                wait_struct.resolved = 0;
-                spin_lock(&pseudo_wait_spinlock);
-                wait_struct.next = pseudo_lock_queue;
-                pseudo_lock_queue = &wait_struct;
-                spin_unlock(&pseudo_wait_spinlock);
-		/*
-		 * The instruction that caused the program check will
-		 * be repeated. Don't signal single step via SIGTRAP.
-		 */
-		clear_tsk_thread_flag(current, TIF_SINGLE_STEP);
-                /* go to sleep */
-                wait_event(wait_struct.queue, wait_struct.resolved);
-        }
-}
-#endif /* CONFIG_ARCH_S390X */
-
 #ifdef CONFIG_PFAULT 
 /*
  * 'pfault' pseudo page faults routines.
@@ -508,7 +399,7 @@ int pfault_init(void)
 		"   .quad  0b,1b\n"
 #endif /* CONFIG_ARCH_S390X */
 		".previous"
-                : "=d" (rc) : "a" (&refbk) : "cc" );
+                : "=d" (rc) : "a" (&refbk), "m" (refbk) : "cc" );
         __ctl_set_bit(0, 9);
         return rc;
 }
@@ -532,7 +423,7 @@ void pfault_fini(void)
 		"   .quad  0b,0b\n"
 #endif /* CONFIG_ARCH_S390X */
 		".previous"
-		: : "a" (&refbk) : "cc" );
+		: : "a" (&refbk), "m" (refbk) : "cc" );
 }
 
 asmlinkage void
diff --git a/arch/s390/mm/ioremap.c b/arch/s390/mm/ioremap.c
index c6c39d868bc8..0f6e9ecbefe2 100644
--- a/arch/s390/mm/ioremap.c
+++ b/arch/s390/mm/ioremap.c
@@ -58,7 +58,7 @@ static inline int remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned lo
 	if (address >= end)
 		BUG();
 	do {
-		pte_t * pte = pte_alloc_kernel(&init_mm, pmd, address);
+		pte_t * pte = pte_alloc_kernel(pmd, address);
 		if (!pte)
 			return -ENOMEM;
 		remap_area_pte(pte, address, end - address, address + phys_addr, flags);
@@ -80,7 +80,6 @@ static int remap_area_pages(unsigned long address, unsigned long phys_addr,
 	flush_cache_all();
 	if (address >= end)
 		BUG();
-	spin_lock(&init_mm.page_table_lock);
 	do {
 		pmd_t *pmd;
 		pmd = pmd_alloc(&init_mm, dir, address);
@@ -94,7 +93,6 @@ static int remap_area_pages(unsigned long address, unsigned long phys_addr,
 		address = (address + PGDIR_SIZE) & PGDIR_MASK;
 		dir++;
 	} while (address && (address < end));
-	spin_unlock(&init_mm.page_table_lock);
 	flush_tlb_all();
 	return 0;
 }
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 3e804c736e64..64f5ae0ff96d 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -490,16 +490,6 @@ config CPU_SUBTYPE_ST40
        depends on CPU_SUBTYPE_ST40STB1 || CPU_SUBTYPE_ST40GX1
        default y
 
-config ARCH_DISCONTIGMEM_ENABLE
-	bool
-	depends on SH_HP690
-	default y
-	help
-	  Say Y to upport efficient handling of discontiguous physical memory,
-	  for architectures which are either NUMA (Non-Uniform Memory Access)
-	  or have huge holes in the physical address space for other reasons.
-	  See <file:Documentation/vm/numa> for more.
-
 source "mm/Kconfig"
 
 config ZERO_PAGE_OFFSET
@@ -770,24 +760,6 @@ source "fs/Kconfig.binfmt"
 
 endmenu
 
-menu "SH initrd options"
-	depends on BLK_DEV_INITRD
-
-config EMBEDDED_RAMDISK
-	bool "Embed root filesystem ramdisk into the kernel"
-
-config EMBEDDED_RAMDISK_IMAGE
-	string "Filename of gziped ramdisk image"
-	depends on EMBEDDED_RAMDISK
-	default "ramdisk.gz"
-	help
-	  This is the filename of the ramdisk image to be built into the
-	  kernel.  Relative pathnames are relative to arch/sh/ramdisk/.
-	  The ramdisk image is not part of the kernel distribution; you must
-	  provide one yourself.
-
-endmenu
-
 source "net/Kconfig"
 
 source "drivers/Kconfig"
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 4a3049080b41..67192d6b00d8 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -60,14 +60,6 @@ LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
 
 core-y				+= arch/sh/kernel/ arch/sh/mm/
 
-#
-# ramdisk/initrd support
-# You need a compressed ramdisk image, named
-# CONFIG_EMBEDDED_RAMDISK_IMAGE. Relative pathnames
-# are relative to arch/sh/ramdisk/.
-#
-core-$(CONFIG_EMBEDDED_RAMDISK)	+= arch/sh/ramdisk/
-
 # Boards
 machdir-$(CONFIG_SH_SOLUTION_ENGINE)		:= se/770x
 machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE)	:= se/7751
diff --git a/arch/sh/boards/renesas/rts7751r2d/mach.c b/arch/sh/boards/renesas/rts7751r2d/mach.c
index 1efc18e786d5..610740512d56 100644
--- a/arch/sh/boards/renesas/rts7751r2d/mach.c
+++ b/arch/sh/boards/renesas/rts7751r2d/mach.c
@@ -23,7 +23,7 @@ extern void init_rts7751r2d_IRQ(void);
 extern void *rts7751r2d_ioremap(unsigned long, unsigned long);
 extern int rts7751r2d_irq_demux(int irq);
 
-extern void *voyagergx_consistent_alloc(struct device *, size_t, dma_addr_t *, int);
+extern void *voyagergx_consistent_alloc(struct device *, size_t, dma_addr_t *, gfp_t);
 extern int voyagergx_consistent_free(struct device *, size_t, void *, dma_addr_t);
 
 /*
diff --git a/arch/sh/boards/superh/microdev/setup.c b/arch/sh/boards/superh/microdev/setup.c
index c18919941ec0..1c1d65fb12df 100644
--- a/arch/sh/boards/superh/microdev/setup.c
+++ b/arch/sh/boards/superh/microdev/setup.c
@@ -13,7 +13,7 @@
 
 #include <linux/config.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/ioport.h>
 #include <asm/io.h>
 #include <asm/mach/irq.h>
diff --git a/arch/sh/cchips/voyagergx/consistent.c b/arch/sh/cchips/voyagergx/consistent.c
index 5b92585a38d2..3d9a02c093a3 100644
--- a/arch/sh/cchips/voyagergx/consistent.c
+++ b/arch/sh/cchips/voyagergx/consistent.c
@@ -31,7 +31,7 @@ static LIST_HEAD(voya_alloc_list);
 #define OHCI_SRAM_SIZE	0x10000
 
 void *voyagergx_consistent_alloc(struct device *dev, size_t size,
-				 dma_addr_t *handle, int flag)
+				 dma_addr_t *handle, gfp_t flag)
 {
 	struct list_head *list = &voya_alloc_list;
 	struct voya_alloc_entry *entry;
diff --git a/arch/sh/drivers/Makefile b/arch/sh/drivers/Makefile
index bd6726cde398..338c3729d270 100644
--- a/arch/sh/drivers/Makefile
+++ b/arch/sh/drivers/Makefile
@@ -2,6 +2,7 @@
 # Makefile for the Linux SuperH-specific device drivers.
 #
 
-obj-$(CONFIG_PCI)	+= pci/
-obj-$(CONFIG_SH_DMA)	+= dma/
+obj-$(CONFIG_PCI)		+= pci/
+obj-$(CONFIG_SH_DMA)		+= dma/
+obj-$(CONFIG_SUPERHYWAY)	+= superhyway/
 
diff --git a/arch/sh/drivers/dma/dma-sysfs.c b/arch/sh/drivers/dma/dma-sysfs.c
index 71a6d4e7809f..6e3b58bd8795 100644
--- a/arch/sh/drivers/dma/dma-sysfs.c
+++ b/arch/sh/drivers/dma/dma-sysfs.c
@@ -13,6 +13,7 @@
 #include <linux/init.h>
 #include <linux/sysdev.h>
 #include <linux/module.h>
+#include <linux/string.h>
 #include <asm/dma.h>
 
 static struct sysdev_class dma_sysclass = {
diff --git a/arch/sh/drivers/pci/dma-dreamcast.c b/arch/sh/drivers/pci/dma-dreamcast.c
index 83de7ef4e7df..e12418bb1fa5 100644
--- a/arch/sh/drivers/pci/dma-dreamcast.c
+++ b/arch/sh/drivers/pci/dma-dreamcast.c
@@ -33,7 +33,7 @@
 static int gapspci_dma_used = 0;
 
 void *dreamcast_consistent_alloc(struct device *dev, size_t size,
-				 dma_addr_t *dma_handle, int flag)
+				 dma_addr_t *dma_handle, gfp_t flag)
 {
 	unsigned long buf;
 
diff --git a/arch/sh/drivers/superhyway/Makefile b/arch/sh/drivers/superhyway/Makefile
new file mode 100644
index 000000000000..5b8e0c7ca3a5
--- /dev/null
+++ b/arch/sh/drivers/superhyway/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the SuperHyway specific kernel interface routines under Linux.
+#
+
+obj-$(CONFIG_CPU_SUBTYPE_SH4_202)	+= ops-sh4-202.o
+
diff --git a/arch/sh/drivers/superhyway/ops-sh4-202.c b/arch/sh/drivers/superhyway/ops-sh4-202.c
new file mode 100644
index 000000000000..a55c98a9052b
--- /dev/null
+++ b/arch/sh/drivers/superhyway/ops-sh4-202.c
@@ -0,0 +1,171 @@
+/*
+ * arch/sh/drivers/superhyway/ops-sh4-202.c
+ *
+ * SuperHyway bus support for SH4-202
+ *
+ * Copyright (C) 2005  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU
+ * General Public License.  See the file "COPYING" in the main
+ * directory of this archive for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/superhyway.h>
+#include <linux/string.h>
+#include <asm/addrspace.h>
+#include <asm/io.h>
+
+#define PHYS_EMI_CBLOCK		P4SEGADDR(0x1ec00000)
+#define PHYS_EMI_DBLOCK		P4SEGADDR(0x08000000)
+#define PHYS_FEMI_CBLOCK	P4SEGADDR(0x1f800000)
+#define PHYS_FEMI_DBLOCK	P4SEGADDR(0x00000000)
+
+#define PHYS_EPBR_BLOCK		P4SEGADDR(0x1de00000)
+#define PHYS_DMAC_BLOCK		P4SEGADDR(0x1fa00000)
+#define PHYS_PBR_BLOCK		P4SEGADDR(0x1fc00000)
+
+static struct resource emi_resources[] = {
+	[0] = {
+		.start	= PHYS_EMI_CBLOCK,
+		.end	= PHYS_EMI_CBLOCK + 0x00300000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PHYS_EMI_DBLOCK,
+		.end	= PHYS_EMI_DBLOCK + 0x08000000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct superhyway_device emi_device = {
+	.name		= "emi",
+	.num_resources	= ARRAY_SIZE(emi_resources),
+	.resource	= emi_resources,
+};
+
+static struct resource femi_resources[] = {
+	[0] = {
+		.start	= PHYS_FEMI_CBLOCK,
+		.end	= PHYS_FEMI_CBLOCK + 0x00100000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PHYS_FEMI_DBLOCK,
+		.end	= PHYS_FEMI_DBLOCK + 0x08000000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct superhyway_device femi_device = {
+	.name		= "femi",
+	.num_resources	= ARRAY_SIZE(femi_resources),
+	.resource	= femi_resources,
+};
+
+static struct resource epbr_resources[] = {
+	[0] = {
+		.start	= P4SEGADDR(0x1e7ffff8),
+		.end	= P4SEGADDR(0x1e7ffff8 + (sizeof(u32) * 2) - 1),
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PHYS_EPBR_BLOCK,
+		.end	= PHYS_EPBR_BLOCK + 0x00a00000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct superhyway_device epbr_device = {
+	.name		= "epbr",
+	.num_resources	= ARRAY_SIZE(epbr_resources),
+	.resource	= epbr_resources,
+};
+
+static struct resource dmac_resource = {
+	.start	= PHYS_DMAC_BLOCK,
+	.end	= PHYS_DMAC_BLOCK + 0x00100000 - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct superhyway_device dmac_device = {
+	.name		= "dmac",
+	.num_resources	= 1,
+	.resource	= &dmac_resource,
+};
+
+static struct resource pbr_resources[] = {
+	[0] = {
+		.start	= P4SEGADDR(0x1ffffff8),
+		.end	= P4SEGADDR(0x1ffffff8 + (sizeof(u32) * 2) - 1),
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PHYS_PBR_BLOCK,
+		.end	= PHYS_PBR_BLOCK + 0x00400000 - (sizeof(u32) * 2) - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct superhyway_device pbr_device = {
+	.name		= "pbr",
+	.num_resources	= ARRAY_SIZE(pbr_resources),
+	.resource	= pbr_resources,
+};
+
+static struct superhyway_device *sh4202_devices[] __initdata = {
+	&emi_device, &femi_device, &epbr_device, &dmac_device, &pbr_device,
+};
+
+static int sh4202_read_vcr(unsigned long base, struct superhyway_vcr_info *vcr)
+{
+	u32 vcrh, vcrl;
+	u64 tmp;
+
+	/*
+	 * XXX: Even though the SH4-202 Evaluation Device documentation
+	 * indicates that VCRL is mapped first with VCRH at a + 0x04
+	 * offset, the opposite seems to be true.
+	 *
+	 * Some modules (PBR and ePBR for instance) also appear to have
+	 * VCRL/VCRH flipped in the documentation, but on the SH4-202
+	 * itself it appears that these are all consistently mapped with
+	 * VCRH preceeding VCRL.
+	 *
+	 * Do not trust the documentation, for it is evil.
+	 */
+	vcrh = ctrl_inl(base);
+	vcrl = ctrl_inl(base + sizeof(u32));
+
+	tmp = ((u64)vcrh << 32) | vcrl;
+	memcpy(vcr, &tmp, sizeof(u64));
+
+	return 0;
+}
+
+static int sh4202_write_vcr(unsigned long base, struct superhyway_vcr_info vcr)
+{
+	u64 tmp = *(u64 *)&vcr;
+
+	ctrl_outl((tmp >> 32) & 0xffffffff, base);
+	ctrl_outl(tmp & 0xffffffff, base + sizeof(u32));
+
+	return 0;
+}
+
+static struct superhyway_ops sh4202_superhyway_ops = {
+	.read_vcr	= sh4202_read_vcr,
+	.write_vcr	= sh4202_write_vcr,
+};
+
+struct superhyway_bus superhyway_channels[] = {
+	{ &sh4202_superhyway_ops, },
+	{ 0, },
+};
+
+int __init superhyway_scan_bus(struct superhyway_bus *bus)
+{
+	return superhyway_add_devices(bus, sh4202_devices,
+				      ARRAY_SIZE(sh4202_devices));
+}
+
diff --git a/arch/sh/kernel/cpufreq.c b/arch/sh/kernel/cpufreq.c
index e0b384bef55f..47abf6e49dfb 100644
--- a/arch/sh/kernel/cpufreq.c
+++ b/arch/sh/kernel/cpufreq.c
@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/cpumask.h>
 #include <linux/smp.h>
+#include <linux/sched.h>	/* set_cpus_allowed() */
 
 #include <asm/processor.h>
 #include <asm/watchdog.h>
diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c
index 6dce9d0b81f8..fd4f240b833d 100644
--- a/arch/sh/kernel/process.c
+++ b/arch/sh/kernel/process.c
@@ -51,28 +51,24 @@ void enable_hlt(void)
 
 EXPORT_SYMBOL(enable_hlt);
 
-void default_idle(void)
+void cpu_idle(void)
 {
 	/* endless idle loop with no priority at all */
 	while (1) {
 		if (hlt_counter) {
-			while (1)
-				if (need_resched())
-					break;
+			while (!need_resched())
+				cpu_relax();
 		} else {
 			while (!need_resched())
 				cpu_sleep();
 		}
 
+		preempt_enable_no_resched();
 		schedule();
+		preempt_disable();
 	}
 }
 
-void cpu_idle(void)
-{
-	default_idle();
-}
-
 void machine_restart(char * __unused)
 {
 	/* SR.BL=1 and invoke address error to let CPU reset (manual reset) */
diff --git a/arch/sh/kernel/ptrace.c b/arch/sh/kernel/ptrace.c
index b28919b65682..1a8be06519ec 100644
--- a/arch/sh/kernel/ptrace.c
+++ b/arch/sh/kernel/ptrace.c
@@ -80,48 +80,11 @@ void ptrace_disable(struct task_struct *child)
 	/* nothing to do.. */
 }
 
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
-	struct task_struct *child;
 	struct user * dummy = NULL;
 	int ret;
 
-	lock_kernel();
-	ret = -EPERM;
-	if (request == PTRACE_TRACEME) {
-		/* are we already being traced? */
-		if (current->ptrace & PT_PTRACED)
-			goto out;
-		ret = security_ptrace(current->parent, current);
-		if (ret)
-			goto out;
-		/* set the ptrace bit in the process flags. */
-		current->ptrace |= PT_PTRACED;
-		ret = 0;
-		goto out;
-	}
-	ret = -ESRCH;
-	read_lock(&tasklist_lock);
-	child = find_task_by_pid(pid);
-	if (child)
-		get_task_struct(child);
-	read_unlock(&tasklist_lock);
-	if (!child)
-		goto out;
-
-	ret = -EPERM;
-	if (pid == 1)		/* you may not mess with init */
-		goto out_tsk;
-
-	if (request == PTRACE_ATTACH) {
-		ret = ptrace_attach(child);
-		goto out_tsk;
-	}
-
-	ret = ptrace_check_attach(child, request == PTRACE_KILL);
-	if (ret < 0)
-		goto out_tsk;
-
 	switch (request) {
 	/* when I and D space are separate, these will need to be fixed. */
 	case PTRACE_PEEKTEXT: /* read word at location addr. */ 
@@ -289,10 +252,7 @@ asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
 		ret = ptrace_request(child, request, addr, data);
 		break;
 	}
-out_tsk:
-	put_task_struct(child);
-out:
-	unlock_kernel();
+
 	return ret;
 }
 
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 25b9d9ebe858..036050b377cd 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -83,9 +83,9 @@ static struct sh_machine_vector* __init get_mv_byname(const char* name);
 /* ... */
 #define COMMAND_LINE ((char *) (PARAM+0x100))
 
-#define RAMDISK_IMAGE_START_MASK  	0x07FF
+#define RAMDISK_IMAGE_START_MASK	0x07FF
 #define RAMDISK_PROMPT_FLAG		0x8000
-#define RAMDISK_LOAD_FLAG		0x4000	
+#define RAMDISK_LOAD_FLAG		0x4000
 
 static char command_line[COMMAND_LINE_SIZE] = { 0, };
 
@@ -284,18 +284,6 @@ void __init setup_arch(char **cmdline_p)
 #define PFN_DOWN(x)	((x) >> PAGE_SHIFT)
 #define PFN_PHYS(x)	((x) << PAGE_SHIFT)
 
-#ifdef CONFIG_DISCONTIGMEM
-	NODE_DATA(0)->bdata = &discontig_node_bdata[0];
-	NODE_DATA(1)->bdata = &discontig_node_bdata[1];
-
-	bootmap_size = init_bootmem_node(NODE_DATA(1), 
-					 PFN_UP(__MEMORY_START_2ND),
-					 PFN_UP(__MEMORY_START_2ND),
-					 PFN_DOWN(__MEMORY_START_2ND+__MEMORY_SIZE_2ND));
-	free_bootmem_node(NODE_DATA(1), __MEMORY_START_2ND, __MEMORY_SIZE_2ND);
-	reserve_bootmem_node(NODE_DATA(1), __MEMORY_START_2ND, bootmap_size);
-#endif
-
 	/*
 	 * Find the highest page frame number we have available
 	 */
@@ -306,10 +294,10 @@ void __init setup_arch(char **cmdline_p)
 	 */
 	max_low_pfn = max_pfn;
 
- 	/*
+	/*
 	 * Partially used pages are not usable - thus
 	 * we are rounding upwards:
- 	 */
+	 */
 	start_pfn = PFN_UP(__pa(_end));
 
 	/*
@@ -360,12 +348,12 @@ void __init setup_arch(char **cmdline_p)
 	reserve_bootmem_node(NODE_DATA(0), __MEMORY_START, PAGE_SIZE);
 
 #ifdef CONFIG_BLK_DEV_INITRD
- 	ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0);
- 	if (&__rd_start != &__rd_end) {
+	ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0);
+	if (&__rd_start != &__rd_end) {
 		LOADER_TYPE = 1;
 		INITRD_START = PHYSADDR((unsigned long)&__rd_start) - __MEMORY_START;
 		INITRD_SIZE = (unsigned long)&__rd_end - (unsigned long)&__rd_start;
- 	}
+	}
 
 	if (LOADER_TYPE && INITRD_START) {
 		if (INITRD_START + INITRD_SIZE <= (max_low_pfn << PAGE_SHIFT)) {
diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c
index 56a39d69e080..59e49b18252c 100644
--- a/arch/sh/kernel/smp.c
+++ b/arch/sh/kernel/smp.c
@@ -22,6 +22,7 @@
 #include <linux/time.h>
 #include <linux/timex.h>
 #include <linux/sched.h>
+#include <linux/module.h>
 
 #include <asm/atomic.h>
 #include <asm/processor.h>
@@ -39,6 +40,8 @@ struct sh_cpuinfo cpu_data[NR_CPUS];
 extern void per_cpu_trap_init(void);
 
 cpumask_t cpu_possible_map;
+EXPORT_SYMBOL(cpu_possible_map);
+
 cpumask_t cpu_online_map;
 static atomic_t cpus_booted = ATOMIC_INIT(0);
 
@@ -109,7 +112,9 @@ int __cpu_up(unsigned int cpu)
 
 int start_secondary(void *unused)
 {
-	unsigned int cpu = smp_processor_id();
+	unsigned int cpu;
+
+	cpu = smp_processor_id();
 
 	atomic_inc(&init_mm.mm_count);
 	current->active_mm = &init_mm;
@@ -117,6 +122,7 @@ int start_secondary(void *unused)
 	smp_store_cpu_info(cpu);
 
 	__smp_slave_init(cpu);
+	preempt_disable();
 	per_cpu_trap_init();
 	
 	atomic_inc(&cpus_booted);
diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c
index 02ca69918d7c..671b876416bf 100644
--- a/arch/sh/kernel/time.c
+++ b/arch/sh/kernel/time.c
@@ -56,10 +56,6 @@ extern unsigned long wall_jiffies;
 #define TICK_SIZE (tick_nsec / 1000)
 DEFINE_SPINLOCK(tmu0_lock);
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 /* XXX: Can we initialize this in a routine somewhere?  Dreamcast doesn't want
  * these routines anywhere... */
 #ifdef CONFIG_SH_RTC
diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c
index 1f7af0c73cf4..df3a9e452cc5 100644
--- a/arch/sh/mm/consistent.c
+++ b/arch/sh/mm/consistent.c
@@ -11,7 +11,7 @@
 #include <linux/dma-mapping.h>
 #include <asm/io.h>
 
-void *consistent_alloc(int gfp, size_t size, dma_addr_t *handle)
+void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *handle)
 {
 	struct page *page, *end, *free;
 	void *ret;
diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c
index 7abba2161da6..775f86cd3fe8 100644
--- a/arch/sh/mm/fault.c
+++ b/arch/sh/mm/fault.c
@@ -194,10 +194,13 @@ asmlinkage int __do_page_fault(struct pt_regs *regs, unsigned long writeaccess,
 			       unsigned long address)
 {
 	unsigned long addrmax = P4SEG;
-	pgd_t *dir;
+	pgd_t *pgd;
 	pmd_t *pmd;
 	pte_t *pte;
 	pte_t entry;
+	struct mm_struct *mm;
+	spinlock_t *ptl;
+	int ret = 1;
 
 #ifdef CONFIG_SH_KGDB
 	if (kgdb_nofault && kgdb_bus_err_hook)
@@ -208,28 +211,28 @@ asmlinkage int __do_page_fault(struct pt_regs *regs, unsigned long writeaccess,
 	addrmax = P4SEG_STORE_QUE + 0x04000000;
 #endif
 
-	if (address >= P3SEG && address < addrmax)
-		dir = pgd_offset_k(address);
-	else if (address >= TASK_SIZE)
+	if (address >= P3SEG && address < addrmax) {
+		pgd = pgd_offset_k(address);
+		mm = NULL;
+	} else if (address >= TASK_SIZE)
 		return 1;
-	else if (!current->mm)
+	else if (!(mm = current->mm))
 		return 1;
 	else
-		dir = pgd_offset(current->mm, address);
+		pgd = pgd_offset(mm, address);
 
-	pmd = pmd_offset(dir, address);
-	if (pmd_none(*pmd))
-		return 1;
-	if (pmd_bad(*pmd)) {
-		pmd_ERROR(*pmd);
-		pmd_clear(pmd);
+	pmd = pmd_offset(pgd, address);
+	if (pmd_none_or_clear_bad(pmd))
 		return 1;
-	}
-	pte = pte_offset_kernel(pmd, address);
+	if (mm)
+		pte = pte_offset_map_lock(mm, pmd, address, &ptl);
+	else
+		pte = pte_offset_kernel(pmd, address);
+
 	entry = *pte;
 	if (pte_none(entry) || pte_not_present(entry)
 	    || (writeaccess && !pte_write(entry)))
-		return 1;
+		goto unlock;
 
 	if (writeaccess)
 		entry = pte_mkdirty(entry);
@@ -251,8 +254,11 @@ asmlinkage int __do_page_fault(struct pt_regs *regs, unsigned long writeaccess,
 
 	set_pte(pte, entry);
 	update_mmu_cache(NULL, address, entry);
-
-	return 0;
+	ret = 0;
+unlock:
+	if (mm)
+		pte_unmap_unlock(pte, ptl);
+	return ret;
 }
 
 void flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
diff --git a/arch/sh/mm/hugetlbpage.c b/arch/sh/mm/hugetlbpage.c
index 95bb1a6c6060..6b7a7688c98e 100644
--- a/arch/sh/mm/hugetlbpage.c
+++ b/arch/sh/mm/hugetlbpage.c
@@ -54,8 +54,6 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
 	return pte;
 }
 
-#define mk_pte_huge(entry) do { pte_val(entry) |= _PAGE_SZHUGE; } while (0)
-
 void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
 		     pte_t *ptep, pte_t entry)
 {
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index 4e9c854845a4..e342565f75fb 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -51,11 +51,6 @@ unsigned long mmu_context_cache = NO_CONTEXT;
 #define MAX_LOW_PFN	(NODE_DATA(0)->bdata->node_low_pfn)
 #endif
 
-#ifdef CONFIG_DISCONTIGMEM
-pg_data_t discontig_page_data[MAX_NUMNODES];
-bootmem_data_t discontig_node_bdata[MAX_NUMNODES];
-#endif
-
 void (*copy_page)(void *from, void *to);
 void (*clear_page)(void *to);
 
@@ -216,15 +211,6 @@ void __init paging_init(void)
 #endif
 	NODE_DATA(0)->node_mem_map = NULL;
 	free_area_init_node(0, NODE_DATA(0), zones_size, __MEMORY_START >> PAGE_SHIFT, 0);
-
-#ifdef CONFIG_DISCONTIGMEM
-	/*
-	 * And for discontig, do some more fixups on the zone sizes..
-	 */
-	zones_size[ZONE_DMA] = __MEMORY_SIZE_2ND >> PAGE_SHIFT;
-	zones_size[ZONE_NORMAL] = 0;
-	free_area_init_node(1, NODE_DATA(1), zones_size, __MEMORY_START_2ND >> PAGE_SHIFT, 0);
-#endif
 }
 
 void __init mem_init(void)
@@ -248,7 +234,7 @@ void __init mem_init(void)
 	memset(empty_zero_page, 0, PAGE_SIZE);
 	__flush_wback_region(empty_zero_page, PAGE_SIZE);
 
-	/* 
+	/*
 	 * Setup wrappers for copy/clear_page(), these will get overridden
 	 * later in the boot process if a better method is available.
 	 */
@@ -257,9 +243,6 @@ void __init mem_init(void)
 
 	/* this will put all low memory onto the freelists */
 	totalram_pages += free_all_bootmem_node(NODE_DATA(0));
-#ifdef CONFIG_DISCONTIGMEM
-	totalram_pages += free_all_bootmem_node(NODE_DATA(1));
-#endif
 	reservedpages = 0;
 	for (tmp = 0; tmp < num_physpages; tmp++)
 		/*
@@ -286,7 +269,7 @@ void __init mem_init(void)
 void free_initmem(void)
 {
 	unsigned long addr;
-	
+
 	addr = (unsigned long)(&__init_begin);
 	for (; addr < (unsigned long)(&__init_end); addr += PAGE_SIZE) {
 		ClearPageReserved(virt_to_page(addr));
diff --git a/arch/sh/mm/ioremap.c b/arch/sh/mm/ioremap.c
index 9f490c2742f0..e794e27a72f1 100644
--- a/arch/sh/mm/ioremap.c
+++ b/arch/sh/mm/ioremap.c
@@ -57,7 +57,7 @@ static inline int remap_area_pmd(pmd_t * pmd, unsigned long address,
 	if (address >= end)
 		BUG();
 	do {
-		pte_t * pte = pte_alloc_kernel(&init_mm, pmd, address);
+		pte_t * pte = pte_alloc_kernel(pmd, address);
 		if (!pte)
 			return -ENOMEM;
 		remap_area_pte(pte, address, end - address, address + phys_addr, flags);
@@ -79,7 +79,6 @@ int remap_area_pages(unsigned long address, unsigned long phys_addr,
 	flush_cache_all();
 	if (address >= end)
 		BUG();
-	spin_lock(&init_mm.page_table_lock);
 	do {
 		pmd_t *pmd;
 		pmd = pmd_alloc(&init_mm, dir, address);
@@ -93,7 +92,6 @@ int remap_area_pages(unsigned long address, unsigned long phys_addr,
 		address = (address + PGDIR_SIZE) & PGDIR_MASK;
 		dir++;
 	} while (address && (address < end));
-	spin_unlock(&init_mm.page_table_lock);
 	flush_tlb_all();
 	return error;
 }
diff --git a/arch/sh/mm/tlb-sh3.c b/arch/sh/mm/tlb-sh3.c
index 7a0d5c10bf20..46b09e26e082 100644
--- a/arch/sh/mm/tlb-sh3.c
+++ b/arch/sh/mm/tlb-sh3.c
@@ -40,12 +40,17 @@ void update_mmu_cache(struct vm_area_struct * vma,
 		return;
 
 #if defined(CONFIG_SH7705_CACHE_32KB)
-	struct page *page;
-	page = pte_page(pte);
-	if (VALID_PAGE(page) && !test_bit(PG_mapped, &page->flags)) {
-		unsigned long phys = pte_val(pte) & PTE_PHYS_MASK;
-		__flush_wback_region((void *)P1SEGADDR(phys), PAGE_SIZE);
-		__set_bit(PG_mapped, &page->flags);
+	{
+		struct page *page = pte_page(pte);
+		unsigned long pfn = pte_pfn(pte);
+
+		if (pfn_valid(pfn) && !test_bit(PG_mapped, &page->flags)) {
+			unsigned long phys = pte_val(pte) & PTE_PHYS_MASK;
+
+			__flush_wback_region((void *)P1SEGADDR(phys),
+					     PAGE_SIZE);
+			__set_bit(PG_mapped, &page->flags);
+		}
 	}
 #endif
 
@@ -80,7 +85,7 @@ void __flush_tlb_page(unsigned long asid, unsigned long page)
 	 */
 	addr = MMU_TLB_ADDRESS_ARRAY | (page & 0x1F000);
 	data = (page & 0xfffe0000) | asid; /* VALID bit is off */
-	
+
 	if ((cpu_data->flags & CPU_HAS_MMU_PAGE_ASSOC)) {
 		addr |= MMU_PAGE_ASSOC_BIT;
 		ways = 1;	/* we already know the way .. */
diff --git a/arch/sh/ramdisk/Makefile b/arch/sh/ramdisk/Makefile
deleted file mode 100644
index 99e1c68673cf..000000000000
--- a/arch/sh/ramdisk/Makefile
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# Makefile for a ramdisk image
-#
-
-obj-y += ramdisk.o
-
-
-O_FORMAT = $(shell $(OBJDUMP) -i | head -n 2 | grep elf32)
-img := $(subst ",,$(CONFIG_EMBEDDED_RAMDISK_IMAGE))
-# add $(src) when $(img) is relative
-img := $(subst $(src)//,/,$(src)/$(img))
-
-quiet_cmd_ramdisk = LD      $@
-define cmd_ramdisk
-	$(LD) -T $(srctree)/$(src)/ld.script -b binary --oformat $(O_FORMAT) \
-		-o $@ $(img)
-endef
-
-$(obj)/ramdisk.o: $(img) $(srctree)/$(src)/ld.script
-	$(call cmd,ramdisk)
diff --git a/arch/sh/ramdisk/ld.script b/arch/sh/ramdisk/ld.script
deleted file mode 100644
index 94beee248c04..000000000000
--- a/arch/sh/ramdisk/ld.script
+++ /dev/null
@@ -1,9 +0,0 @@
-OUTPUT_ARCH(sh)
-SECTIONS
-{
-  .initrd :
-  {
-       *(.data)
-  }
-}
-
diff --git a/arch/sh64/kernel/process.c b/arch/sh64/kernel/process.c
index efde41c0cd66..b95d04141855 100644
--- a/arch/sh64/kernel/process.c
+++ b/arch/sh64/kernel/process.c
@@ -307,23 +307,19 @@ __setup("hlt", hlt_setup);
 
 static inline void hlt(void)
 {
-	if (hlt_counter)
-		return;
-
 	__asm__ __volatile__ ("sleep" : : : "memory");
 }
 
 /*
  * The idle loop on a uniprocessor SH..
  */
-void default_idle(void)
+void cpu_idle(void)
 {
 	/* endless idle loop with no priority at all */
 	while (1) {
 		if (hlt_counter) {
-			while (1)
-				if (need_resched())
-					break;
+			while (!need_resched())
+				cpu_relax();
 		} else {
 			local_irq_disable();
 			while (!need_resched()) {
@@ -334,13 +330,11 @@ void default_idle(void)
 			}
 			local_irq_enable();
 		}
+		preempt_enable_no_resched();
 		schedule();
+		preempt_disable();
 	}
-}
 
-void cpu_idle(void)
-{
-	default_idle();
 }
 
 void machine_restart(char * __unused)
diff --git a/arch/sh64/kernel/ptrace.c b/arch/sh64/kernel/ptrace.c
index fd2000956dae..cd22e9471316 100644
--- a/arch/sh64/kernel/ptrace.c
+++ b/arch/sh64/kernel/ptrace.c
@@ -28,6 +28,7 @@
 #include <linux/ptrace.h>
 #include <linux/user.h>
 #include <linux/signal.h>
+#include <linux/syscalls.h>
 
 #include <asm/io.h>
 #include <asm/uaccess.h>
@@ -121,61 +122,11 @@ put_fpu_long(struct task_struct *task, unsigned long addr, unsigned long data)
 	return 0;
 }
 
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
-	struct task_struct *child;
-	extern void poke_real_address_q(unsigned long long addr, unsigned long long data);
-#define WPC_DBRMODE 0x0d104008
-	static int first_call = 1;
 	int ret;
 
-	lock_kernel();
-
-	if (first_call) {
-		/* Set WPC.DBRMODE to 0.  This makes all debug events get
-		 * delivered through RESVEC, i.e. into the handlers in entry.S.
-		 * (If the kernel was downloaded using a remote gdb, WPC.DBRMODE
-		 * would normally be left set to 1, which makes debug events get
-		 * delivered through DBRVEC, i.e. into the remote gdb's
-		 * handlers.  This prevents ptrace getting them, and confuses
-		 * the remote gdb.) */
-		printk("DBRMODE set to 0 to permit native debugging\n");
-		poke_real_address_q(WPC_DBRMODE, 0);
-		first_call = 0;
-	}
-
-	ret = -EPERM;
-	if (request == PTRACE_TRACEME) {
-		/* are we already being traced? */
-		if (current->ptrace & PT_PTRACED)
-			goto out;
-		/* set the ptrace bit in the process flags. */
-		current->ptrace |= PT_PTRACED;
-		ret = 0;
-		goto out;
-	}
-	ret = -ESRCH;
-	read_lock(&tasklist_lock);
-	child = find_task_by_pid(pid);
-	if (child)
-		get_task_struct(child);
-	read_unlock(&tasklist_lock);
-	if (!child)
-		goto out;
-
-	ret = -EPERM;
-	if (pid == 1)		/* you may not mess with init */
-		goto out_tsk;
-
-	if (request == PTRACE_ATTACH) {
-		ret = ptrace_attach(child);
-			goto out_tsk;
-		}
-
-	ret = ptrace_check_attach(child, request == PTRACE_KILL);
-	if (ret < 0)
-		goto out_tsk;
-
 	switch (request) {
 	/* when I and D space are separate, these will need to be fixed. */
 	case PTRACE_PEEKTEXT: /* read word at location addr. */
@@ -313,13 +264,33 @@ asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
 		ret = ptrace_request(child, request, addr, data);
 		break;
 	}
-out_tsk:
-	put_task_struct(child);
-out:
-	unlock_kernel();
 	return ret;
 }
 
+asmlinkage int sh64_ptrace(long request, long pid, long addr, long data)
+{
+	extern void poke_real_address_q(unsigned long long addr, unsigned long long data);
+#define WPC_DBRMODE 0x0d104008
+	static int first_call = 1;
+
+	lock_kernel();
+	if (first_call) {
+		/* Set WPC.DBRMODE to 0.  This makes all debug events get
+		 * delivered through RESVEC, i.e. into the handlers in entry.S.
+		 * (If the kernel was downloaded using a remote gdb, WPC.DBRMODE
+		 * would normally be left set to 1, which makes debug events get
+		 * delivered through DBRVEC, i.e. into the remote gdb's
+		 * handlers.  This prevents ptrace getting them, and confuses
+		 * the remote gdb.) */
+		printk("DBRMODE set to 0 to permit native debugging\n");
+		poke_real_address_q(WPC_DBRMODE, 0);
+		first_call = 0;
+	}
+	unlock_kernel();
+
+	return sys_ptrace(request, pid, addr, data);
+}
+
 asmlinkage void syscall_trace(void)
 {
 	struct task_struct *tsk = current;
diff --git a/arch/sh64/kernel/syscalls.S b/arch/sh64/kernel/syscalls.S
index a3d037805f1c..c0079d54c850 100644
--- a/arch/sh64/kernel/syscalls.S
+++ b/arch/sh64/kernel/syscalls.S
@@ -46,7 +46,7 @@ sys_call_table:
 	.long sys_setuid16
 	.long sys_getuid16
 	.long sys_stime			/* 25 */
-	.long sys_ptrace
+	.long sh64_ptrace
 	.long sys_alarm
 	.long sys_fstat
 	.long sys_pause
diff --git a/arch/sh64/kernel/time.c b/arch/sh64/kernel/time.c
index f4a62a10053c..870fe5327e09 100644
--- a/arch/sh64/kernel/time.c
+++ b/arch/sh64/kernel/time.c
@@ -116,8 +116,6 @@
 
 extern unsigned long wall_jiffies;
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-
 static unsigned long tmu_base, rtc_base;
 unsigned long cprc_base;
 
@@ -253,6 +251,7 @@ int do_settimeofday(struct timespec *tv)
 
 	return 0;
 }
+EXPORT_SYMBOL(do_settimeofday);
 
 static int set_rtc_time(unsigned long nowtime)
 {
diff --git a/arch/sh64/mm/cache.c b/arch/sh64/mm/cache.c
index 3b87e25ea773..c0c1b21350d8 100644
--- a/arch/sh64/mm/cache.c
+++ b/arch/sh64/mm/cache.c
@@ -584,32 +584,36 @@ static void sh64_dcache_purge_phy_page(unsigned long paddr)
 	}
 }
 
-static void sh64_dcache_purge_user_page(struct mm_struct *mm, unsigned long eaddr)
+static void sh64_dcache_purge_user_pages(struct mm_struct *mm,
+				unsigned long addr, unsigned long end)
 {
 	pgd_t *pgd;
 	pmd_t *pmd;
 	pte_t *pte;
 	pte_t entry;
+	spinlock_t *ptl;
 	unsigned long paddr;
 
-	/* NOTE : all the callers of this have mm->page_table_lock held, so the
-	   following page table traversal is safe even on SMP/pre-emptible. */
-
-	if (!mm) return; /* No way to find physical address of page */
-	pgd = pgd_offset(mm, eaddr);
-	if (pgd_bad(*pgd)) return;
-
-	pmd = pmd_offset(pgd, eaddr);
-	if (pmd_none(*pmd) || pmd_bad(*pmd)) return;
-
-	pte = pte_offset_kernel(pmd, eaddr);
-	entry = *pte;
-	if (pte_none(entry) || !pte_present(entry)) return;
-
-	paddr = pte_val(entry) & PAGE_MASK;
-
-	sh64_dcache_purge_coloured_phy_page(paddr, eaddr);
-
+	if (!mm)
+		return; /* No way to find physical address of page */
+
+	pgd = pgd_offset(mm, addr);
+	if (pgd_bad(*pgd))
+		return;
+
+	pmd = pmd_offset(pgd, addr);
+	if (pmd_none(*pmd) || pmd_bad(*pmd))
+		return;
+
+	pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
+	do {
+		entry = *pte;
+		if (pte_none(entry) || !pte_present(entry))
+			continue;
+		paddr = pte_val(entry) & PAGE_MASK;
+		sh64_dcache_purge_coloured_phy_page(paddr, addr);
+	} while (pte++, addr += PAGE_SIZE, addr != end);
+	pte_unmap_unlock(pte - 1, ptl);
 }
 /****************************************************************************/
 
@@ -668,7 +672,7 @@ static void sh64_dcache_purge_user_range(struct mm_struct *mm,
 	int n_pages;
 
 	n_pages = ((end - start) >> PAGE_SHIFT);
-	if (n_pages >= 64) {
+	if (n_pages >= 64 || ((start ^ (end - 1)) & PMD_MASK)) {
 #if 1
 		sh64_dcache_purge_all();
 #else
@@ -707,20 +711,10 @@ static void sh64_dcache_purge_user_range(struct mm_struct *mm,
 		}
 #endif
 	} else {
-		/* 'Small' range */
-		unsigned long aligned_start;
-		unsigned long eaddr;
-		unsigned long last_page_start;
-
-		aligned_start = start & PAGE_MASK;
-		/* 'end' is 1 byte beyond the end of the range */
-		last_page_start = (end - 1) & PAGE_MASK;
-
-		eaddr = aligned_start;
-		while (eaddr <= last_page_start) {
-			sh64_dcache_purge_user_page(mm, eaddr);
-			eaddr += PAGE_SIZE;
-		}
+		/* Small range, covered by a single page table page */
+		start &= PAGE_MASK;	/* should already be so */
+		end = PAGE_ALIGN(end);	/* should already be so */
+		sh64_dcache_purge_user_pages(mm, start, end);
 	}
 	return;
 }
@@ -880,9 +874,7 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
 	   addresses from the user address space specified by mm, after writing
 	   back any dirty data.
 
-	   Note(1), 'end' is 1 byte beyond the end of the range to flush.
-
-	   Note(2), this is called with mm->page_table_lock held.*/
+	   Note, 'end' is 1 byte beyond the end of the range to flush. */
 
 	sh64_dcache_purge_user_range(mm, start, end);
 	sh64_icache_inv_user_page_range(mm, start, end);
@@ -898,7 +890,7 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long eaddr, unsigned
 	   the I-cache must be searched too in case the page in question is
 	   both writable and being executed from (e.g. stack trampolines.)
 
-	   Note(1), this is called with mm->page_table_lock held.
+	   Note, this is called with pte lock held.
 	   */
 
 	sh64_dcache_purge_phy_page(pfn << PAGE_SHIFT);
diff --git a/arch/sh64/mm/hugetlbpage.c b/arch/sh64/mm/hugetlbpage.c
index dcd9c8a8baf8..ed6a505b3ee2 100644
--- a/arch/sh64/mm/hugetlbpage.c
+++ b/arch/sh64/mm/hugetlbpage.c
@@ -54,41 +54,31 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
 	return pte;
 }
 
-#define mk_pte_huge(entry) do { pte_val(entry) |= _PAGE_SZHUGE; } while (0)
-
-static void set_huge_pte(struct mm_struct *mm, struct vm_area_struct *vma,
-			 struct page *page, pte_t * page_table, int write_access)
+void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+		     pte_t *ptep, pte_t entry)
 {
-	unsigned long i;
-	pte_t entry;
-
-	add_mm_counter(mm, rss, HPAGE_SIZE / PAGE_SIZE);
-
-	if (write_access)
-		entry = pte_mkwrite(pte_mkdirty(mk_pte(page,
-						       vma->vm_page_prot)));
-	else
-		entry = pte_wrprotect(mk_pte(page, vma->vm_page_prot));
-	entry = pte_mkyoung(entry);
-	mk_pte_huge(entry);
+	int i;
 
 	for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) {
-		set_pte(page_table, entry);
-		page_table++;
-
+		set_pte_at(mm, addr, ptep, entry);
+		ptep++;
+		addr += PAGE_SIZE;
 		pte_val(entry) += PAGE_SIZE;
 	}
 }
 
-pte_t huge_ptep_get_and_clear(pte_t *ptep)
+pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep)
 {
 	pte_t entry;
+	int i;
 
 	entry = *ptep;
 
 	for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) {
-		pte_clear(pte);
-		pte++;
+		pte_clear(mm, addr, ptep);
+		addr += PAGE_SIZE;
+		ptep++;
 	}
 
 	return entry;
@@ -106,79 +96,6 @@ int is_aligned_hugepage_range(unsigned long addr, unsigned long len)
 	return 0;
 }
 
-int copy_hugetlb_page_range(struct mm_struct *dst, struct mm_struct *src,
-			    struct vm_area_struct *vma)
-{
-	pte_t *src_pte, *dst_pte, entry;
-	struct page *ptepage;
-	unsigned long addr = vma->vm_start;
-	unsigned long end = vma->vm_end;
-	int i;
-
-	while (addr < end) {
-		dst_pte = huge_pte_alloc(dst, addr);
-		if (!dst_pte)
-			goto nomem;
-		src_pte = huge_pte_offset(src, addr);
-		BUG_ON(!src_pte || pte_none(*src_pte));
-		entry = *src_pte;
-		ptepage = pte_page(entry);
-		get_page(ptepage);
-		for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) {
-			set_pte(dst_pte, entry);
-			pte_val(entry) += PAGE_SIZE;
-			dst_pte++;
-		}
-		add_mm_counter(dst, rss, HPAGE_SIZE / PAGE_SIZE);
-		addr += HPAGE_SIZE;
-	}
-	return 0;
-
-nomem:
-	return -ENOMEM;
-}
-
-int follow_hugetlb_page(struct mm_struct *mm, struct vm_area_struct *vma,
-			struct page **pages, struct vm_area_struct **vmas,
-			unsigned long *position, int *length, int i)
-{
-	unsigned long vaddr = *position;
-	int remainder = *length;
-
-	WARN_ON(!is_vm_hugetlb_page(vma));
-
-	while (vaddr < vma->vm_end && remainder) {
-		if (pages) {
-			pte_t *pte;
-			struct page *page;
-
-			pte = huge_pte_offset(mm, vaddr);
-
-			/* hugetlb should be locked, and hence, prefaulted */
-			BUG_ON(!pte || pte_none(*pte));
-
-			page = pte_page(*pte);
-
-			WARN_ON(!PageCompound(page));
-
-			get_page(page);
-			pages[i] = page;
-		}
-
-		if (vmas)
-			vmas[i] = vma;
-
-		vaddr += PAGE_SIZE;
-		--remainder;
-		++i;
-	}
-
-	*length = remainder;
-	*position = vaddr;
-
-	return i;
-}
-
 struct page *follow_huge_addr(struct mm_struct *mm,
 			      unsigned long address, int write)
 {
@@ -195,84 +112,3 @@ struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 {
 	return NULL;
 }
-
-void unmap_hugepage_range(struct vm_area_struct *vma,
-			  unsigned long start, unsigned long end)
-{
-	struct mm_struct *mm = vma->vm_mm;
-	unsigned long address;
-	pte_t *pte;
-	struct page *page;
-	int i;
-
-	BUG_ON(start & (HPAGE_SIZE - 1));
-	BUG_ON(end & (HPAGE_SIZE - 1));
-
-	for (address = start; address < end; address += HPAGE_SIZE) {
-		pte = huge_pte_offset(mm, address);
-		BUG_ON(!pte);
-		if (pte_none(*pte))
-			continue;
-		page = pte_page(*pte);
-		put_page(page);
-		for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) {
-			pte_clear(mm, address+(i*PAGE_SIZE), pte);
-			pte++;
-		}
-	}
-	add_mm_counter(mm, rss, -((end - start) >> PAGE_SHIFT));
-	flush_tlb_range(vma, start, end);
-}
-
-int hugetlb_prefault(struct address_space *mapping, struct vm_area_struct *vma)
-{
-	struct mm_struct *mm = current->mm;
-	unsigned long addr;
-	int ret = 0;
-
-	BUG_ON(vma->vm_start & ~HPAGE_MASK);
-	BUG_ON(vma->vm_end & ~HPAGE_MASK);
-
-	spin_lock(&mm->page_table_lock);
-	for (addr = vma->vm_start; addr < vma->vm_end; addr += HPAGE_SIZE) {
-		unsigned long idx;
-		pte_t *pte = huge_pte_alloc(mm, addr);
-		struct page *page;
-
-		if (!pte) {
-			ret = -ENOMEM;
-			goto out;
-		}
-		if (!pte_none(*pte))
-			continue;
-
-		idx = ((addr - vma->vm_start) >> HPAGE_SHIFT)
-			+ (vma->vm_pgoff >> (HPAGE_SHIFT - PAGE_SHIFT));
-		page = find_get_page(mapping, idx);
-		if (!page) {
-			/* charge the fs quota first */
-			if (hugetlb_get_quota(mapping)) {
-				ret = -ENOMEM;
-				goto out;
-			}
-			page = alloc_huge_page();
-			if (!page) {
-				hugetlb_put_quota(mapping);
-				ret = -ENOMEM;
-				goto out;
-			}
-			ret = add_to_page_cache(page, mapping, idx, GFP_ATOMIC);
-			if (! ret) {
-				unlock_page(page);
-			} else {
-				hugetlb_put_quota(mapping);
-				free_huge_page(page);
-				goto out;
-			}
-		}
-		set_huge_pte(mm, vma, page, pte, vma->vm_flags & VM_WRITE);
-	}
-out:
-	spin_unlock(&mm->page_table_lock);
-	return ret;
-}
diff --git a/arch/sh64/mm/ioremap.c b/arch/sh64/mm/ioremap.c
index f4003da556bc..fb1866fa2c9d 100644
--- a/arch/sh64/mm/ioremap.c
+++ b/arch/sh64/mm/ioremap.c
@@ -79,7 +79,7 @@ static inline int remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned lo
 		BUG();
 
 	do {
-		pte_t * pte = pte_alloc_kernel(&init_mm, pmd, address);
+		pte_t * pte = pte_alloc_kernel(pmd, address);
 		if (!pte)
 			return -ENOMEM;
 		remap_area_pte(pte, address, end - address, address + phys_addr, flags);
@@ -101,7 +101,6 @@ static int remap_area_pages(unsigned long address, unsigned long phys_addr,
 	flush_cache_all();
 	if (address >= end)
 		BUG();
-	spin_lock(&init_mm.page_table_lock);
 	do {
 		pmd_t *pmd = pmd_alloc(&init_mm, dir, address);
 		error = -ENOMEM;
@@ -115,7 +114,6 @@ static int remap_area_pages(unsigned long address, unsigned long phys_addr,
 		address = (address + PGDIR_SIZE) & PGDIR_MASK;
 		dir++;
 	} while (address && (address < end));
-	spin_unlock(&init_mm.page_table_lock);
 	flush_tlb_all();
 	return 0;
 }
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index aba05394d30a..3cfb8be3ff6d 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -25,62 +25,6 @@ source "init/Kconfig"
 
 menu "General machine setup"
 
-config VT
-	bool
-	select INPUT
-	default y
-	---help---
-	  If you say Y here, you will get support for terminal devices with
-	  display and keyboard devices. These are called "virtual" because you
-	  can run several virtual terminals (also called virtual consoles) on
-	  one physical terminal. This is rather useful, for example one
-	  virtual terminal can collect system messages and warnings, another
-	  one can be used for a text-mode user session, and a third could run
-	  an X session, all in parallel. Switching between virtual terminals
-	  is done with certain key combinations, usually Alt-<function key>.
-
-	  The setterm command ("man setterm") can be used to change the
-	  properties (such as colors or beeping) of a virtual terminal. The
-	  man page console_codes(4) ("man console_codes") contains the special
-	  character sequences that can be used to change those properties
-	  directly. The fonts used on virtual terminals can be changed with
-	  the setfont ("man setfont") command and the key bindings are defined
-	  with the loadkeys ("man loadkeys") command.
-
-	  You need at least one virtual terminal device in order to make use
-	  of your keyboard and monitor. Therefore, only people configuring an
-	  embedded system would want to say N here in order to save some
-	  memory; the only way to log into such a system is then via a serial
-	  or network connection.
-
-	  If unsure, say Y, or else you won't be able to do much with your new
-	  shiny Linux system :-)
-
-config VT_CONSOLE
-	bool
-	default y
-	---help---
-	  The system console is the device which receives all kernel messages
-	  and warnings and which allows logins in single user mode. If you
-	  answer Y here, a virtual terminal (the device used to interact with
-	  a physical terminal) can be used as system console. This is the most
-	  common mode of operations, so you should say Y here unless you want
-	  the kernel messages be output only to a serial port (in which case
-	  you should say Y to "Console on serial port", below).
-
-	  If you do say Y here, by default the currently visible virtual
-	  terminal (/dev/tty0) will be used as system console. You can change
-	  that with a kernel command line option such as "console=tty3" which
-	  would use the third virtual terminal as system console. (Try "man
-	  bootparam" or see the documentation of your boot loader (lilo or
-	  loadlin) about how to pass options to the kernel at boot time.)
-
-	  If unsure, say Y.
-
-config HW_CONSOLE
-	bool
-	default y
-
 config SMP
 	bool "Symmetric multi-processing support (does not work on sun4/sun4c)"
 	depends on BROKEN
@@ -257,6 +201,14 @@ config SUN_OPENPROMFS
 	  Only choose N if you know in advance that you will not need to modify
 	  OpenPROM settings on the running system.
 
+config SPARC_LED
+	tristate "Sun4m LED driver"
+	help
+	  This driver toggles the front-panel LED on sun4m systems
+	  in a user-specifyable manner.  It's state can be probed
+	  by reading /proc/led and it's blinking mode can be changed
+	  via writes to /proc/led
+
 source "fs/Kconfig.binfmt"
 
 config SUNOS_EMUL
diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile
index 3d22ba2af01c..1b83e21841b5 100644
--- a/arch/sparc/kernel/Makefile
+++ b/arch/sparc/kernel/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_SUN_AUXIO) += auxio.o
 obj-$(CONFIG_PCI) += ebus.o
 obj-$(CONFIG_SUN_PM) += apc.o pmc.o
 obj-$(CONFIG_MODULES) += module.o sparc_ksyms.o
+obj-$(CONFIG_SPARC_LED) += led.o
 
 ifdef CONFIG_SUNOS_EMUL
 obj-y += sys_sunos.o sunos_ioctl.o
diff --git a/arch/sparc/kernel/cpu.c b/arch/sparc/kernel/cpu.c
index 6a4ebc62193e..d7bfc61d2879 100644
--- a/arch/sparc/kernel/cpu.c
+++ b/arch/sparc/kernel/cpu.c
@@ -75,7 +75,7 @@ struct cpu_fp_info linux_sparc_fpu[] = {
   { 9, 3, "Fujitsu or Weitek on-chip FPU"},
 };
 
-#define NSPARCFPU  (sizeof(linux_sparc_fpu)/sizeof(struct cpu_fp_info))
+#define NSPARCFPU  ARRAY_SIZE(linux_sparc_fpu)
 
 struct cpu_iu_info linux_sparc_chips[] = {
   /* Sun4/100, 4/200, SLC */
@@ -120,7 +120,7 @@ struct cpu_iu_info linux_sparc_chips[] = {
   { 0xf, 0, "UNKNOWN CPU-VENDOR/TYPE"},
 };
 
-#define NSPARCCHIPS  (sizeof(linux_sparc_chips)/sizeof(struct cpu_iu_info))
+#define NSPARCCHIPS  ARRAY_SIZE(linux_sparc_chips)
 
 char *sparc_cpu_type;
 char *sparc_fpu_type;
diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index d0f2bd227c4c..d39c9f206271 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -252,7 +252,7 @@ void *sbus_alloc_consistent(struct sbus_dev *sdev, long len, u32 *dma_addrp)
 	}
 
 	order = get_order(len_total);
-	if ((va = __get_free_pages(GFP_KERNEL, order)) == 0)
+	if ((va = __get_free_pages(GFP_KERNEL|__GFP_COMP, order)) == 0)
 		goto err_nopages;
 
 	if ((res = kmalloc(sizeof(struct resource), GFP_KERNEL)) == NULL)
diff --git a/arch/sparc/kernel/led.c b/arch/sparc/kernel/led.c
new file mode 100644
index 000000000000..2a3afca453c9
--- /dev/null
+++ b/arch/sparc/kernel/led.c
@@ -0,0 +1,139 @@
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/proc_fs.h>
+#include <linux/string.h>
+
+#include <asm/auxio.h>
+
+#define LED_MAX_LENGTH 8 /* maximum chars written to proc file */
+
+static inline void led_toggle(void)
+{
+	unsigned char val = get_auxio();
+	unsigned char on, off;
+
+	if (val & AUXIO_LED) {
+		on = 0;
+		off = AUXIO_LED;
+	} else {
+		on = AUXIO_LED;
+		off = 0;
+	}
+
+	set_auxio(on, off);
+}
+
+static struct timer_list led_blink_timer;
+
+static void led_blink(unsigned long timeout)
+{
+	led_toggle();
+
+	/* reschedule */
+	if (!timeout) { /* blink according to load */
+		led_blink_timer.expires = jiffies +
+			((1 + (avenrun[0] >> FSHIFT)) * HZ);
+		led_blink_timer.data = 0;
+	} else { /* blink at user specified interval */
+		led_blink_timer.expires = jiffies + (timeout * HZ);
+		led_blink_timer.data = timeout;
+	}
+	add_timer(&led_blink_timer);
+}
+
+static int led_read_proc(char *buf, char **start, off_t offset, int count,
+			 int *eof, void *data)
+{
+	int len = 0;
+
+	if (get_auxio() & AUXIO_LED)
+		len = sprintf(buf, "on\n");
+	else
+		len = sprintf(buf, "off\n");
+
+	return len;
+}
+
+static int led_write_proc(struct file *file, const char *buffer,
+			  unsigned long count, void *data)
+{
+	char *buf = NULL;
+
+	if (count > LED_MAX_LENGTH)
+		count = LED_MAX_LENGTH;
+
+	buf = kmalloc(sizeof(char) * (count + 1), GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	if (copy_from_user(buf, buffer, count)) {
+		kfree(buf);
+		return -EFAULT;
+	}
+
+	buf[count] = '\0';
+
+	/* work around \n when echo'ing into proc */
+	if (buf[count - 1] == '\n')
+		buf[count - 1] = '\0';
+
+	/* before we change anything we want to stop any running timers,
+	 * otherwise calls such as on will have no persistent effect
+	 */
+	del_timer_sync(&led_blink_timer);
+
+	if (!strcmp(buf, "on")) {
+		auxio_set_led(AUXIO_LED_ON);
+	} else if (!strcmp(buf, "toggle")) {
+		led_toggle();
+	} else if ((*buf > '0') && (*buf <= '9')) {
+		led_blink(simple_strtoul(buf, NULL, 10));
+	} else if (!strcmp(buf, "load")) {
+		led_blink(0);
+	} else {
+		auxio_set_led(AUXIO_LED_OFF);
+	}
+
+	kfree(buf);
+
+	return count;
+}
+
+static struct proc_dir_entry *led;
+
+#define LED_VERSION	"0.1"
+
+static int __init led_init(void)
+{
+	init_timer(&led_blink_timer);
+	led_blink_timer.function = led_blink;
+
+	led = create_proc_entry("led", 0, NULL);
+	if (!led)
+		return -ENOMEM;
+
+	led->read_proc = led_read_proc; /* reader function */
+	led->write_proc = led_write_proc; /* writer function */
+	led->owner = THIS_MODULE;
+
+	printk(KERN_INFO
+	       "led: version %s, Lars Kotthoff <metalhead@metalhead.ws>\n",
+	       LED_VERSION);
+
+	return 0;
+}
+
+static void __exit led_exit(void)
+{
+	remove_proc_entry("led", NULL);
+	del_timer_sync(&led_blink_timer);
+}
+
+module_init(led_init);
+module_exit(led_exit);
+
+MODULE_AUTHOR("Lars Kotthoff <metalhead@metalhead.ws>");
+MODULE_DESCRIPTION("Provides control of the front LED on SPARC systems.");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(LED_VERSION);
diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c
index 36a40697b8d6..cccfc12802ed 100644
--- a/arch/sparc/kernel/pcic.c
+++ b/arch/sparc/kernel/pcic.c
@@ -143,7 +143,7 @@ static struct pcic_ca2irq pcic_i_jk[] = {
  * as several PROMs may be installed on the same physical board.
  */
 #define SN2L_INIT(name, map)	\
-  { name, map, sizeof(map)/sizeof(struct pcic_ca2irq) }
+  { name, map, ARRAY_SIZE(map) }
 
 static struct pcic_sn2list pcic_known_sysnames[] = {
 	SN2L_INIT("SUNW,JavaEngine1", pcic_i_je1a),	/* JE1, PROM 2.32 */
@@ -497,8 +497,8 @@ static void pcic_map_pci_device(struct linux_pcic *pcic,
 				 * CheerIO makes a similar conversion.
 				 * See ebus.c for details.
 				 *
-				 * Note that check_region()/request_region()
-				 * work for these devices.
+				 * Note that request_region()
+				 * works for these devices.
 				 *
 				 * XXX Neat trick, but it's a *bad* idea
 				 * to shit into regions like that.
diff --git a/arch/sparc/kernel/process.c b/arch/sparc/kernel/process.c
index 29e72b57d4fd..ea8647411462 100644
--- a/arch/sparc/kernel/process.c
+++ b/arch/sparc/kernel/process.c
@@ -67,13 +67,6 @@ extern void fpsave(unsigned long *, unsigned long *, void *, unsigned long *);
 struct task_struct *last_task_used_math = NULL;
 struct thread_info *current_set[NR_CPUS];
 
-/*
- * default_idle is new in 2.5. XXX Review, currently stolen from sparc64.
- */
-void default_idle(void)
-{
-}
-
 #ifndef CONFIG_SMP
 
 #define SUN4C_FAULT_HIGH 100
@@ -92,12 +85,11 @@ void cpu_idle(void)
 			static unsigned long fps;
 			unsigned long now;
 			unsigned long faults;
-			unsigned long flags;
 
 			extern unsigned long sun4c_kernel_faults;
 			extern void sun4c_grow_kernel_ring(void);
 
-			local_irq_save(flags);
+			local_irq_disable();
 			now = jiffies;
 			count -= (now - last_jiffies);
 			last_jiffies = now;
@@ -113,14 +105,19 @@ void cpu_idle(void)
 					sun4c_grow_kernel_ring();
 				}
 			}
-			local_irq_restore(flags);
+			local_irq_enable();
 		}
 
-		while((!need_resched()) && pm_idle) {
-			(*pm_idle)();
+		if (pm_idle) {
+			while (!need_resched())
+				(*pm_idle)();
+		} else {
+			while (!need_resched())
+				cpu_relax();
 		}
-
+		preempt_enable_no_resched();
 		schedule();
+		preempt_disable();
 		check_pgt_cache();
 	}
 }
@@ -130,13 +127,15 @@ void cpu_idle(void)
 /* This is being executed in task 0 'user space'. */
 void cpu_idle(void)
 {
+        set_thread_flag(TIF_POLLING_NRFLAG);
 	/* endless idle loop with no priority at all */
 	while(1) {
-		if(need_resched()) {
-			schedule();
-			check_pgt_cache();
-		}
-		barrier(); /* or else gcc optimizes... */
+		while (!need_resched())
+			cpu_relax();
+		preempt_enable_no_resched();
+		schedule();
+		preempt_disable();
+		check_pgt_cache();
 	}
 }
 
diff --git a/arch/sparc/kernel/setup.c b/arch/sparc/kernel/setup.c
index 53c192a4982f..3509e4305532 100644
--- a/arch/sparc/kernel/setup.c
+++ b/arch/sparc/kernel/setup.c
@@ -249,8 +249,6 @@ struct tt_entry *sparc_ttable;
 
 struct pt_regs fake_swapper_regs;
 
-extern void paging_init(void);
-
 void __init setup_arch(char **cmdline_p)
 {
 	int i;
diff --git a/arch/sparc/kernel/sunos_ioctl.c b/arch/sparc/kernel/sunos_ioctl.c
index df1c0b31a930..a6ba3d26222c 100644
--- a/arch/sparc/kernel/sunos_ioctl.c
+++ b/arch/sparc/kernel/sunos_ioctl.c
@@ -23,7 +23,6 @@
 #include <linux/smp_lock.h>
 #include <linux/syscalls.h>
 #include <linux/file.h>
-#include <asm/kbio.h>
 
 #if 0
 extern char sunkbd_type;
diff --git a/arch/sparc/kernel/time.c b/arch/sparc/kernel/time.c
index bc015e980341..24814d58f9e1 100644
--- a/arch/sparc/kernel/time.c
+++ b/arch/sparc/kernel/time.c
@@ -45,10 +45,6 @@
 
 extern unsigned long wall_jiffies;
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 DEFINE_SPINLOCK(rtc_lock);
 enum sparc_clock_type sp_clock_typ;
 DEFINE_SPINLOCK(mostek_lock);
@@ -457,7 +453,7 @@ void __init time_init(void)
 	sbus_time_init();
 }
 
-extern __inline__ unsigned long do_gettimeoffset(void)
+static inline unsigned long do_gettimeoffset(void)
 {
 	return (*master_l10_counter >> 10) & 0x1fffff;
 }
diff --git a/arch/sparc/lib/atomic32.c b/arch/sparc/lib/atomic32.c
index 2e64e8c3e8e5..cb3cf0f22822 100644
--- a/arch/sparc/lib/atomic32.c
+++ b/arch/sparc/lib/atomic32.c
@@ -37,17 +37,43 @@ int __atomic_add_return(int i, atomic_t *v)
 	spin_unlock_irqrestore(ATOMIC_HASH(v), flags);
 	return ret;
 }
+EXPORT_SYMBOL(__atomic_add_return);
 
-void atomic_set(atomic_t *v, int i)
+int atomic_cmpxchg(atomic_t *v, int old, int new)
 {
+	int ret;
 	unsigned long flags;
+
 	spin_lock_irqsave(ATOMIC_HASH(v), flags);
+	ret = v->counter;
+	if (likely(ret == old))
+		v->counter = new;
 
-	v->counter = i;
+	spin_unlock_irqrestore(ATOMIC_HASH(v), flags);
+	return ret;
+}
+
+int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int ret;
+	unsigned long flags;
 
+	spin_lock_irqsave(ATOMIC_HASH(v), flags);
+	ret = v->counter;
+	if (ret != u)
+		v->counter += a;
 	spin_unlock_irqrestore(ATOMIC_HASH(v), flags);
+	return ret != u;
 }
 
-EXPORT_SYMBOL(__atomic_add_return);
-EXPORT_SYMBOL(atomic_set);
+static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
+/* Atomic operations are already serializing */
+void atomic_set(atomic_t *v, int i)
+{
+	unsigned long flags;
 
+	spin_lock_irqsave(ATOMIC_HASH(v), flags);
+	v->counter = i;
+	spin_unlock_irqrestore(ATOMIC_HASH(v), flags);
+}
+EXPORT_SYMBOL(atomic_set);
diff --git a/arch/sparc/lib/bitext.c b/arch/sparc/lib/bitext.c
index 94b05e8c906c..2e168d16547f 100644
--- a/arch/sparc/lib/bitext.c
+++ b/arch/sparc/lib/bitext.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/smp_lock.h>
+#include <linux/string.h>
 #include <linux/bitops.h>
 
 #include <asm/bitext.h>
diff --git a/arch/sparc/mm/fault.c b/arch/sparc/mm/fault.c
index 2bbd53f3cafb..9eeed3347df3 100644
--- a/arch/sparc/mm/fault.c
+++ b/arch/sparc/mm/fault.c
@@ -33,8 +33,6 @@
 #include <asm/kdebug.h>
 #include <asm/uaccess.h>
 
-#define ELEMENTS(arr) (sizeof (arr)/sizeof (arr[0]))
-
 extern int prom_node_root;
 
 /* At boot time we determine these two values necessary for setting
diff --git a/arch/sparc/mm/generic.c b/arch/sparc/mm/generic.c
index 20ccb957fb77..2cb0728cee05 100644
--- a/arch/sparc/mm/generic.c
+++ b/arch/sparc/mm/generic.c
@@ -32,9 +32,7 @@ static inline void io_remap_pte_range(struct mm_struct *mm, pte_t * pte, unsigne
 	if (end > PMD_SIZE)
 		end = PMD_SIZE;
 	do {
-		pte_t oldpage = *pte;
-		pte_clear(mm, address, pte);
-		set_pte(pte, mk_pte_io(offset, prot, space));
+		set_pte_at(mm, address, pte, mk_pte_io(offset, prot, space));
 		address += PAGE_SIZE;
 		offset += PAGE_SIZE;
 		pte++;
@@ -63,7 +61,7 @@ static inline int io_remap_pmd_range(struct mm_struct *mm, pmd_t * pmd, unsigned
 }
 
 int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
-			unsigned long pfn, unsigned long size, pgprot_t prot)
+		       unsigned long pfn, unsigned long size, pgprot_t prot)
 {
 	int error = 0;
 	pgd_t * dir;
@@ -73,14 +71,18 @@ int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
 	int space = GET_IOSPACE(pfn);
 	unsigned long offset = GET_PFN(pfn) << PAGE_SHIFT;
 
+	/* See comment in mm/memory.c remap_pfn_range */
+	vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP;
+	vma->vm_pgoff = (offset >> PAGE_SHIFT) |
+		((unsigned long)space << 28UL);
+
 	prot = __pgprot(pg_iobits);
 	offset -= from;
 	dir = pgd_offset(mm, from);
 	flush_cache_range(vma, beg, end);
 
-	spin_lock(&mm->page_table_lock);
 	while (from < end) {
-		pmd_t *pmd = pmd_alloc(current->mm, dir, from);
+		pmd_t *pmd = pmd_alloc(mm, dir, from);
 		error = -ENOMEM;
 		if (!pmd)
 			break;
@@ -90,7 +92,6 @@ int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
 		from = (from + PGDIR_SIZE) & PGDIR_MASK;
 		dir++;
 	}
-	spin_unlock(&mm->page_table_lock);
 
 	flush_tlb_range(vma, beg, end);
 	return error;
diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c
index c89a803cbc20..c664b962987c 100644
--- a/arch/sparc/mm/srmmu.c
+++ b/arch/sparc/mm/srmmu.c
@@ -260,7 +260,7 @@ static inline pte_t srmmu_pte_modify(pte_t pte, pgprot_t newprot)
 { return __pte((pte_val(pte) & SRMMU_CHG_MASK) | pgprot_val(newprot)); }
 
 /* to find an entry in a top-level page table... */
-extern inline pgd_t *srmmu_pgd_offset(struct mm_struct * mm, unsigned long address)
+static inline pgd_t *srmmu_pgd_offset(struct mm_struct * mm, unsigned long address)
 { return mm->pgd + (address >> SRMMU_PGDIR_SHIFT); }
 
 /* Find an entry in the second-level page table.. */
diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
index 1e9d8638a28a..3fded69b1922 100644
--- a/arch/sparc64/Kconfig
+++ b/arch/sparc64/Kconfig
@@ -377,8 +377,21 @@ source "drivers/fc4/Kconfig"
 
 source "fs/Kconfig"
 
+menu "Instrumentation Support"
+        depends on EXPERIMENTAL
+
 source "arch/sparc64/oprofile/Kconfig"
 
+config KPROBES
+	bool "Kprobes (EXPERIMENTAL)"
+	help
+	  Kprobes allows you to trap at almost any kernel address and
+	  execute a callback function.  register_kprobe() establishes
+	  a probepoint and specifies the callback.  Kprobes is useful
+	  for kernel debugging, non-intrusive instrumentation and testing.
+	  If in doubt, say "N".
+endmenu
+
 source "arch/sparc64/Kconfig.debug"
 
 source "security/Kconfig"
diff --git a/arch/sparc64/Kconfig.debug b/arch/sparc64/Kconfig.debug
index af0e9411b83e..3e31be494e54 100644
--- a/arch/sparc64/Kconfig.debug
+++ b/arch/sparc64/Kconfig.debug
@@ -11,16 +11,6 @@ config DEBUG_STACK_USAGE
 
 	  This option will slow down process creation somewhat.
 
-config KPROBES
-	bool "Kprobes"
-	depends on DEBUG_KERNEL
-	help
-	  Kprobes allows you to trap at almost any kernel address and
-	  execute a callback function.  register_kprobe() establishes
-	  a probepoint and specifies the callback.  Kprobes is useful
-	  for kernel debugging, non-intrusive instrumentation and testing.
-	  If in doubt, say "N".
-
 config DEBUG_DCFLUSH
 	bool "D-cache flush debugging"
 	depends on DEBUG_KERNEL
@@ -33,6 +23,14 @@ config DEBUG_BOOTMEM
 	depends on DEBUG_KERNEL
 	bool "Debug BOOTMEM initialization"
 
+config DEBUG_PAGEALLOC
+	bool "Page alloc debugging"
+	depends on DEBUG_KERNEL && !SOFTWARE_SUSPEND
+	help
+	  Unmap pages from the kernel linear mapping after free_pages().
+	  This results in a large slowdown, but helps to find certain types
+	  of memory corruptions.
+
 config MCOUNT
 	bool
 	depends on STACK_DEBUG
diff --git a/arch/sparc64/kernel/binfmt_aout32.c b/arch/sparc64/kernel/binfmt_aout32.c
index b2854ef221d0..edf52d06b280 100644
--- a/arch/sparc64/kernel/binfmt_aout32.c
+++ b/arch/sparc64/kernel/binfmt_aout32.c
@@ -241,7 +241,6 @@ static int load_aout32_binary(struct linux_binprm * bprm, struct pt_regs * regs)
 	current->mm->brk = ex.a_bss +
 		(current->mm->start_brk = N_BSSADDR(ex));
 
-	set_mm_counter(current->mm, rss, 0);
 	current->mm->mmap = NULL;
 	compute_creds(bprm);
  	current->flags &= ~PF_FORKNOEXEC;
diff --git a/arch/sparc64/kernel/cpu.c b/arch/sparc64/kernel/cpu.c
index 48756958116b..00eed88ef2e8 100644
--- a/arch/sparc64/kernel/cpu.c
+++ b/arch/sparc64/kernel/cpu.c
@@ -39,9 +39,11 @@ struct cpu_fp_info linux_sparc_fpu[] = {
   { 0x3e, 0x15, 0, "UltraSparc III+ integrated FPU"},
   { 0x3e, 0x16, 0, "UltraSparc IIIi integrated FPU"},
   { 0x3e, 0x18, 0, "UltraSparc IV integrated FPU"},
+  { 0x3e, 0x19, 0, "UltraSparc IV+ integrated FPU"},
+  { 0x3e, 0x22, 0, "UltraSparc IIIi+ integrated FPU"},
 };
 
-#define NSPARCFPU  (sizeof(linux_sparc_fpu)/sizeof(struct cpu_fp_info))
+#define NSPARCFPU  ARRAY_SIZE(linux_sparc_fpu)
 
 struct cpu_iu_info linux_sparc_chips[] = {
   { 0x17, 0x10, "TI UltraSparc I   (SpitFire)"},
@@ -53,9 +55,11 @@ struct cpu_iu_info linux_sparc_chips[] = {
   { 0x3e, 0x15, "TI UltraSparc III+ (Cheetah+)"},
   { 0x3e, 0x16, "TI UltraSparc IIIi (Jalapeno)"},
   { 0x3e, 0x18, "TI UltraSparc IV (Jaguar)"},
+  { 0x3e, 0x19, "TI UltraSparc IV+ (Panther)"},
+  { 0x3e, 0x22, "TI UltraSparc IIIi+ (Serrano)"},
 };
 
-#define NSPARCCHIPS  (sizeof(linux_sparc_chips)/sizeof(struct cpu_iu_info))
+#define NSPARCCHIPS  ARRAY_SIZE(linux_sparc_chips)
 
 char *sparc_cpu_type = "cpu-oops";
 char *sparc_fpu_type = "fpu-oops";
diff --git a/arch/sparc64/kernel/devices.c b/arch/sparc64/kernel/devices.c
index d710274e516b..df9a1ca8fd77 100644
--- a/arch/sparc64/kernel/devices.c
+++ b/arch/sparc64/kernel/devices.c
@@ -135,6 +135,28 @@ void __init device_scan(void)
 		cpu_data(0).clock_tick = prom_getintdefault(cpu_node,
 							    "clock-frequency",
 							    0);
+		cpu_data(0).dcache_size = prom_getintdefault(cpu_node,
+							     "dcache-size",
+							     16 * 1024);
+		cpu_data(0).dcache_line_size =
+			prom_getintdefault(cpu_node, "dcache-line-size", 32);
+		cpu_data(0).icache_size = prom_getintdefault(cpu_node,
+							     "icache-size",
+							     16 * 1024);
+		cpu_data(0).icache_line_size =
+			prom_getintdefault(cpu_node, "icache-line-size", 32);
+		cpu_data(0).ecache_size = prom_getintdefault(cpu_node,
+							     "ecache-size",
+							     4 * 1024 * 1024);
+		cpu_data(0).ecache_line_size =
+			prom_getintdefault(cpu_node, "ecache-line-size", 64);
+		printk("CPU[0]: Caches "
+		       "D[sz(%d):line_sz(%d)] "
+		       "I[sz(%d):line_sz(%d)] "
+		       "E[sz(%d):line_sz(%d)]\n",
+		       cpu_data(0).dcache_size, cpu_data(0).dcache_line_size,
+		       cpu_data(0).icache_size, cpu_data(0).icache_line_size,
+		       cpu_data(0).ecache_size, cpu_data(0).ecache_line_size);
 	}
 #endif
 
diff --git a/arch/sparc64/kernel/dtlb_backend.S b/arch/sparc64/kernel/dtlb_backend.S
index 538522848ad4..acc889a7f9c1 100644
--- a/arch/sparc64/kernel/dtlb_backend.S
+++ b/arch/sparc64/kernel/dtlb_backend.S
@@ -9,17 +9,7 @@
 #include <asm/pgtable.h>
 #include <asm/mmu.h>
 
-#if PAGE_SHIFT == 13
-#define SZ_BITS		_PAGE_SZ8K
-#elif PAGE_SHIFT == 16
-#define SZ_BITS		_PAGE_SZ64K
-#elif PAGE_SHIFT == 19
-#define SZ_BITS		_PAGE_SZ512K
-#elif PAGE_SHIFT == 22
-#define SZ_BITS		_PAGE_SZ4MB
-#endif
-
-#define VALID_SZ_BITS	(_PAGE_VALID | SZ_BITS)
+#define VALID_SZ_BITS	(_PAGE_VALID | _PAGE_SZBITS)
 
 #define VPTE_BITS		(_PAGE_CP | _PAGE_CV | _PAGE_P )
 #define VPTE_SHIFT		(PAGE_SHIFT - 3)
@@ -163,7 +153,6 @@ sparc64_vpte_continue:
 	stxa		%g4, [%g1 + %g1] ASI_DMMU	! Restore previous TAG_ACCESS
 	retry						! Load PTE once again
 
-#undef SZ_BITS
 #undef VALID_SZ_BITS
 #undef VPTE_SHIFT
 #undef VPTE_BITS
diff --git a/arch/sparc64/kernel/dtlb_base.S b/arch/sparc64/kernel/dtlb_base.S
index ded2fed23fcc..6528786840c0 100644
--- a/arch/sparc64/kernel/dtlb_base.S
+++ b/arch/sparc64/kernel/dtlb_base.S
@@ -53,39 +53,36 @@
  * be guaranteed to be 0 ... mmu_context.h does guarantee this
  * by only using 10 bits in the hwcontext value.
  */
-#define CREATE_VPTE_OFFSET1(r1, r2)
+#define CREATE_VPTE_OFFSET1(r1, r2) nop
 #define CREATE_VPTE_OFFSET2(r1, r2) \
 				srax	r1, 10, r2
-#define CREATE_VPTE_NOP		nop
 #else
 #define CREATE_VPTE_OFFSET1(r1, r2) \
 				srax	r1, PAGE_SHIFT, r2
 #define CREATE_VPTE_OFFSET2(r1, r2) \
 				sllx	r2, 3, r2
-#define CREATE_VPTE_NOP
 #endif
 
 /* DTLB ** ICACHE line 1: Quick user TLB misses		*/
+	mov		TLB_SFSR, %g1
 	ldxa		[%g1 + %g1] ASI_DMMU, %g4	! Get TAG_ACCESS
 	andcc		%g4, TAG_CONTEXT_BITS, %g0	! From Nucleus?
 from_tl1_trap:
 	rdpr		%tl, %g5			! For TL==3 test
 	CREATE_VPTE_OFFSET1(%g4, %g6)			! Create VPTE offset
-	be,pn		%xcc, 3f			! Yep, special processing
+	be,pn		%xcc, kvmap			! Yep, special processing
 	 CREATE_VPTE_OFFSET2(%g4, %g6)			! Create VPTE offset
 	cmp		%g5, 4				! Last trap level?
-	be,pn		%xcc, longpath			! Yep, cannot risk VPTE miss
-	 nop						! delay slot
 
 /* DTLB ** ICACHE line 2: User finish + quick kernel TLB misses	*/
+	be,pn		%xcc, longpath			! Yep, cannot risk VPTE miss
+	 nop						! delay slot
 	ldxa		[%g3 + %g6] ASI_S, %g5		! Load VPTE
 1:	brgez,pn	%g5, longpath			! Invalid, branch out
 	 nop						! Delay-slot
 9:	stxa		%g5, [%g0] ASI_DTLB_DATA_IN	! Reload TLB
 	retry						! Trap return
-3:	brlz,pt		%g4, 9b				! Kernel virtual map?
-	 xor		%g2, %g4, %g5			! Finish bit twiddles
-	ba,a,pt		%xcc, kvmap			! Yep, go check for obp/vmalloc
+	nop
 
 /* DTLB ** ICACHE line 3: winfixups+real_faults		*/
 longpath:
@@ -106,8 +103,7 @@ longpath:
 	nop
 	nop
 	nop
-	CREATE_VPTE_NOP
+	nop
 
 #undef CREATE_VPTE_OFFSET1
 #undef CREATE_VPTE_OFFSET2
-#undef CREATE_VPTE_NOP
diff --git a/arch/sparc64/kernel/dtlb_prot.S b/arch/sparc64/kernel/dtlb_prot.S
index d848bb7374bb..e0a920162604 100644
--- a/arch/sparc64/kernel/dtlb_prot.S
+++ b/arch/sparc64/kernel/dtlb_prot.S
@@ -14,14 +14,14 @@
  */
 
 /* PROT ** ICACHE line 1: User DTLB protection trap	*/
-	stxa		%g0, [%g1] ASI_DMMU		! Clear SFSR FaultValid bit
-	membar		#Sync				! Synchronize ASI stores
-	rdpr		%pstate, %g5			! Move into alternate globals
+	mov		TLB_SFSR, %g1
+	stxa		%g0, [%g1] ASI_DMMU		! Clear FaultValid bit
+	membar		#Sync				! Synchronize stores
+	rdpr		%pstate, %g5			! Move into alt-globals
 	wrpr		%g5, PSTATE_AG|PSTATE_MG, %pstate
-	rdpr		%tl, %g1			! Need to do a winfixup?
+	rdpr		%tl, %g1			! Need a winfixup?
 	cmp		%g1, 1				! Trap level >1?
-	mov		TLB_TAG_ACCESS, %g4		! Prepare reload of vaddr
-	nop
+	mov		TLB_TAG_ACCESS, %g4		! For reload of vaddr
 
 /* PROT ** ICACHE line 2: More real fault processing */
 	bgu,pn		%xcc, winfix_trampoline		! Yes, perform winfixup
diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S
index b48349527853..11a848402fb1 100644
--- a/arch/sparc64/kernel/entry.S
+++ b/arch/sparc64/kernel/entry.S
@@ -30,163 +30,10 @@
 	.text
 	.align		32
 
-	.globl		sparc64_vpte_patchme1
-	.globl		sparc64_vpte_patchme2
-/*
- * On a second level vpte miss, check whether the original fault is to the OBP 
- * range (note that this is only possible for instruction miss, data misses to
- * obp range do not use vpte). If so, go back directly to the faulting address.
- * This is because we want to read the tpc, otherwise we have no way of knowing
- * the 8k aligned faulting address if we are using >8k kernel pagesize. This
- * also ensures no vpte range addresses are dropped into tlb while obp is
- * executing (see inherit_locked_prom_mappings() rant).
- */
-sparc64_vpte_nucleus:
-	/* Note that kvmap below has verified that the address is
-	 * in the range MODULES_VADDR --> VMALLOC_END already.  So
-	 * here we need only check if it is an OBP address or not.
-	 */
-	sethi		%hi(LOW_OBP_ADDRESS), %g5
-	cmp		%g4, %g5
-	blu,pn		%xcc, sparc64_vpte_patchme1
-	 mov		0x1, %g5
-	sllx		%g5, 32, %g5
-	cmp		%g4, %g5
-	blu,pn		%xcc, obp_iaddr_patch
-	 nop
-
-	/* These two instructions are patched by paginig_init().  */
-sparc64_vpte_patchme1:
-	sethi		%hi(0), %g5
-sparc64_vpte_patchme2:
-	or		%g5, %lo(0), %g5
-
-	/* With kernel PGD in %g5, branch back into dtlb_backend.  */
-	ba,pt		%xcc, sparc64_kpte_continue
-	 andn		%g1, 0x3, %g1	/* Finish PMD offset adjustment.  */
-
-vpte_noent:
-	/* Restore previous TAG_ACCESS, %g5 is zero, and we will
-	 * skip over the trap instruction so that the top level
-	 * TLB miss handler will thing this %g5 value is just an
-	 * invalid PTE, thus branching to full fault processing.
-	 */
-	mov		TLB_SFSR, %g1
-	stxa		%g4, [%g1 + %g1] ASI_DMMU
-	done
-
-	.globl		obp_iaddr_patch
-obp_iaddr_patch:
-	/* These two instructions patched by inherit_prom_mappings().  */
-	sethi		%hi(0), %g5
-	or		%g5, %lo(0), %g5
-
-	/* Behave as if we are at TL0.  */
-	wrpr		%g0, 1, %tl
-	rdpr		%tpc, %g4	/* Find original faulting iaddr */
-	srlx		%g4, 13, %g4	/* Throw out context bits */
-	sllx		%g4, 13, %g4	/* g4 has vpn + ctx0 now */
-
-	/* Restore previous TAG_ACCESS.  */
-	mov		TLB_SFSR, %g1
-	stxa		%g4, [%g1 + %g1] ASI_IMMU
-
-	/* Get PMD offset.  */
-	srlx		%g4, 23, %g6
-	and		%g6, 0x7ff, %g6
-	sllx		%g6, 2, %g6
-
-	/* Load PMD, is it valid?  */
-	lduwa		[%g5 + %g6] ASI_PHYS_USE_EC, %g5
-	brz,pn		%g5, longpath
-	 sllx		%g5, 11, %g5
-
-	/* Get PTE offset.  */
-	srlx		%g4, 13, %g6
-	and		%g6, 0x3ff, %g6
-	sllx		%g6, 3, %g6
-
-	/* Load PTE.  */
-	ldxa		[%g5 + %g6] ASI_PHYS_USE_EC, %g5
-	brgez,pn	%g5, longpath
-	 nop
-
-	/* TLB load and return from trap.  */
-	stxa		%g5, [%g0] ASI_ITLB_DATA_IN
-	retry
-
-	.globl		obp_daddr_patch
-obp_daddr_patch:
-	/* These two instructions patched by inherit_prom_mappings().  */
-	sethi		%hi(0), %g5
-	or		%g5, %lo(0), %g5
-
-	/* Get PMD offset.  */
-	srlx		%g4, 23, %g6
-	and		%g6, 0x7ff, %g6
-	sllx		%g6, 2, %g6
-
-	/* Load PMD, is it valid?  */
-	lduwa		[%g5 + %g6] ASI_PHYS_USE_EC, %g5
-	brz,pn		%g5, longpath
-	 sllx		%g5, 11, %g5
-
-	/* Get PTE offset.  */
-	srlx		%g4, 13, %g6
-	and		%g6, 0x3ff, %g6
-	sllx		%g6, 3, %g6
-
-	/* Load PTE.  */
-	ldxa		[%g5 + %g6] ASI_PHYS_USE_EC, %g5
-	brgez,pn	%g5, longpath
-	 nop
-
-	/* TLB load and return from trap.  */
-	stxa		%g5, [%g0] ASI_DTLB_DATA_IN
-	retry
-
-/*
- * On a first level data miss, check whether this is to the OBP range (note
- * that such accesses can be made by prom, as well as by kernel using
- * prom_getproperty on "address"), and if so, do not use vpte access ...
- * rather, use information saved during inherit_prom_mappings() using 8k
- * pagesize.
- */
-	.align		32
-kvmap:
-	sethi		%hi(MODULES_VADDR), %g5
-	cmp		%g4, %g5
-	blu,pn		%xcc, longpath
-	 mov		(VMALLOC_END >> 24), %g5
-	sllx		%g5, 24, %g5
-	cmp		%g4, %g5
-	bgeu,pn		%xcc, longpath
-	 nop
-
-kvmap_check_obp:
-	sethi		%hi(LOW_OBP_ADDRESS), %g5
-	cmp		%g4, %g5
-	blu,pn		%xcc, kvmap_vmalloc_addr
-	 mov		0x1, %g5
-	sllx		%g5, 32, %g5
-	cmp		%g4, %g5
-	blu,pn		%xcc, obp_daddr_patch
-	 nop
-
-kvmap_vmalloc_addr:
-	/* If we get here, a vmalloc addr was accessed, load kernel VPTE.  */
-	ldxa		[%g3 + %g6] ASI_N, %g5
-	brgez,pn	%g5, longpath
-	 nop
-
-	/* PTE is valid, load into TLB and return from trap.  */
-	stxa		%g5, [%g0] ASI_DTLB_DATA_IN	! Reload TLB
-	retry
-
 	/* This is trivial with the new code... */
 	.globl		do_fpdis
 do_fpdis:
-	sethi		%hi(TSTATE_PEF), %g4					! IEU0
+	sethi		%hi(TSTATE_PEF), %g4
 	rdpr		%tstate, %g5
 	andcc		%g5, %g4, %g0
 	be,pt		%xcc, 1f
@@ -203,18 +50,18 @@ do_fpdis:
 	add		%g0, %g0, %g0
 	ba,a,pt		%xcc, rtrap_clr_l6
 
-1:	ldub		[%g6 + TI_FPSAVED], %g5					! Load	Group
-	wr		%g0, FPRS_FEF, %fprs					! LSU	Group+4bubbles
-	andcc		%g5, FPRS_FEF, %g0					! IEU1	Group
-	be,a,pt		%icc, 1f						! CTI
-	 clr		%g7							! IEU0
-	ldx		[%g6 + TI_GSR], %g7					! Load	Group
-1:	andcc		%g5, FPRS_DL, %g0					! IEU1
-	bne,pn		%icc, 2f						! CTI
-	 fzero		%f0							! FPA
-	andcc		%g5, FPRS_DU, %g0					! IEU1  Group
-	bne,pn		%icc, 1f						! CTI
-	 fzero		%f2							! FPA
+1:	ldub		[%g6 + TI_FPSAVED], %g5
+	wr		%g0, FPRS_FEF, %fprs
+	andcc		%g5, FPRS_FEF, %g0
+	be,a,pt		%icc, 1f
+	 clr		%g7
+	ldx		[%g6 + TI_GSR], %g7
+1:	andcc		%g5, FPRS_DL, %g0
+	bne,pn		%icc, 2f
+	 fzero		%f0
+	andcc		%g5, FPRS_DU, %g0
+	bne,pn		%icc, 1f
+	 fzero		%f2
 	faddd		%f0, %f2, %f4
 	fmuld		%f0, %f2, %f6
 	faddd		%f0, %f2, %f8
@@ -250,15 +97,17 @@ do_fpdis:
 	faddd		%f0, %f2, %f4
 	fmuld		%f0, %f2, %f6
 	ldxa		[%g3] ASI_DMMU, %g5
-cplus_fptrap_insn_1:
-	sethi		%hi(0), %g2
+	sethi		%hi(sparc64_kern_sec_context), %g2
+	ldx		[%g2 + %lo(sparc64_kern_sec_context)], %g2
 	stxa		%g2, [%g3] ASI_DMMU
 	membar		#Sync
 	add		%g6, TI_FPREGS + 0xc0, %g2
 	faddd		%f0, %f2, %f8
 	fmuld		%f0, %f2, %f10
-	ldda		[%g1] ASI_BLK_S, %f32	! grrr, where is ASI_BLK_NUCLEUS 8-(
+	membar		#Sync
+	ldda		[%g1] ASI_BLK_S, %f32
 	ldda		[%g2] ASI_BLK_S, %f48
+	membar		#Sync
 	faddd		%f0, %f2, %f12
 	fmuld		%f0, %f2, %f14
 	faddd		%f0, %f2, %f16
@@ -269,7 +118,6 @@ cplus_fptrap_insn_1:
 	fmuld		%f0, %f2, %f26
 	faddd		%f0, %f2, %f28
 	fmuld		%f0, %f2, %f30
-	membar		#Sync
 	b,pt		%xcc, fpdis_exit
 	 nop
 2:	andcc		%g5, FPRS_DU, %g0
@@ -279,15 +127,17 @@ cplus_fptrap_insn_1:
 	fzero		%f34
 	ldxa		[%g3] ASI_DMMU, %g5
 	add		%g6, TI_FPREGS, %g1
-cplus_fptrap_insn_2:
-	sethi		%hi(0), %g2
+	sethi		%hi(sparc64_kern_sec_context), %g2
+	ldx		[%g2 + %lo(sparc64_kern_sec_context)], %g2
 	stxa		%g2, [%g3] ASI_DMMU
 	membar		#Sync
 	add		%g6, TI_FPREGS + 0x40, %g2
 	faddd		%f32, %f34, %f36
 	fmuld		%f32, %f34, %f38
-	ldda		[%g1] ASI_BLK_S, %f0	! grrr, where is ASI_BLK_NUCLEUS 8-(
+	membar		#Sync
+	ldda		[%g1] ASI_BLK_S, %f0
 	ldda		[%g2] ASI_BLK_S, %f16
+	membar		#Sync
 	faddd		%f32, %f34, %f40
 	fmuld		%f32, %f34, %f42
 	faddd		%f32, %f34, %f44
@@ -300,18 +150,18 @@ cplus_fptrap_insn_2:
 	fmuld		%f32, %f34, %f58
 	faddd		%f32, %f34, %f60
 	fmuld		%f32, %f34, %f62
-	membar		#Sync
 	ba,pt		%xcc, fpdis_exit
 	 nop
 3:	mov		SECONDARY_CONTEXT, %g3
 	add		%g6, TI_FPREGS, %g1
 	ldxa		[%g3] ASI_DMMU, %g5
-cplus_fptrap_insn_3:
-	sethi		%hi(0), %g2
+	sethi		%hi(sparc64_kern_sec_context), %g2
+	ldx		[%g2 + %lo(sparc64_kern_sec_context)], %g2
 	stxa		%g2, [%g3] ASI_DMMU
 	membar		#Sync
 	mov		0x40, %g2
-	ldda		[%g1] ASI_BLK_S, %f0		! grrr, where is ASI_BLK_NUCLEUS 8-(
+	membar		#Sync
+	ldda		[%g1] ASI_BLK_S, %f0
 	ldda		[%g1 + %g2] ASI_BLK_S, %f16
 	add		%g1, 0x80, %g1
 	ldda		[%g1] ASI_BLK_S, %f32
@@ -472,8 +322,8 @@ do_fptrap_after_fsr:
 	stx		%g3, [%g6 + TI_GSR]
 	mov		SECONDARY_CONTEXT, %g3
 	ldxa		[%g3] ASI_DMMU, %g5
-cplus_fptrap_insn_4:
-	sethi		%hi(0), %g2
+	sethi		%hi(sparc64_kern_sec_context), %g2
+	ldx		[%g2 + %lo(sparc64_kern_sec_context)], %g2
 	stxa		%g2, [%g3] ASI_DMMU
 	membar		#Sync
 	add		%g6, TI_FPREGS, %g2
@@ -494,45 +344,17 @@ cplus_fptrap_insn_4:
 	ba,pt		%xcc, etrap
 	 wr		%g0, 0, %fprs
 
-cplus_fptrap_1:
-	sethi		%hi(CTX_CHEETAH_PLUS_CTX0), %g2
-
-	.globl		cheetah_plus_patch_fpdis
-cheetah_plus_patch_fpdis:
-	/* We configure the dTLB512_0 for 4MB pages and the
-	 * dTLB512_1 for 8K pages when in context zero.
-	 */
-	sethi			%hi(cplus_fptrap_1), %o0
-	lduw			[%o0 + %lo(cplus_fptrap_1)], %o1
-
-	set			cplus_fptrap_insn_1, %o2
-	stw			%o1, [%o2]
-	flush			%o2
-	set			cplus_fptrap_insn_2, %o2
-	stw			%o1, [%o2]
-	flush			%o2
-	set			cplus_fptrap_insn_3, %o2
-	stw			%o1, [%o2]
-	flush			%o2
-	set			cplus_fptrap_insn_4, %o2
-	stw			%o1, [%o2]
-	flush			%o2
-
-	retl
-	 nop
-
 	/* The registers for cross calls will be:
 	 *
 	 * DATA 0: [low 32-bits]  Address of function to call, jmp to this
 	 *         [high 32-bits] MMU Context Argument 0, place in %g5
-	 * DATA 1: Address Argument 1, place in %g6
+	 * DATA 1: Address Argument 1, place in %g1
 	 * DATA 2: Address Argument 2, place in %g7
 	 *
 	 * With this method we can do most of the cross-call tlb/cache
 	 * flushing very quickly.
 	 *
-	 * Current CPU's IRQ worklist table is locked into %g1,
-	 * don't touch.
+	 * Current CPU's IRQ worklist table is locked into %g6, don't touch.
 	 */
 	.text
 	.align		32
@@ -1006,13 +828,14 @@ cheetah_plus_dcpe_trap_vector:
 	nop
 
 do_cheetah_plus_data_parity:
-	ba,pt		%xcc, etrap
+	rdpr		%pil, %g2
+	wrpr		%g0, 15, %pil
+	ba,pt		%xcc, etrap_irq
 	 rd		%pc, %g7
 	mov		0x0, %o0
 	call		cheetah_plus_parity_error
 	 add		%sp, PTREGS_OFF, %o1
-	ba,pt		%xcc, rtrap
-	 clr		%l6
+	ba,a,pt		%xcc, rtrap_irq
 
 cheetah_plus_dcpe_trap_vector_tl1:
 	membar		#Sync
@@ -1036,13 +859,14 @@ cheetah_plus_icpe_trap_vector:
 	nop
 
 do_cheetah_plus_insn_parity:
-	ba,pt		%xcc, etrap
+	rdpr		%pil, %g2
+	wrpr		%g0, 15, %pil
+	ba,pt		%xcc, etrap_irq
 	 rd		%pc, %g7
 	mov		0x1, %o0
 	call		cheetah_plus_parity_error
 	 add		%sp, PTREGS_OFF, %o1
-	ba,pt		%xcc, rtrap
-	 clr		%l6
+	ba,a,pt		%xcc, rtrap_irq
 
 cheetah_plus_icpe_trap_vector_tl1:
 	membar		#Sync
@@ -1075,6 +899,10 @@ do_dcpe_tl1:
 	 nop
 	wrpr		%g1, %tl		! Restore original trap level
 do_dcpe_tl1_nonfatal:	/* Ok we may use interrupt globals safely. */
+	sethi		%hi(dcache_parity_tl1_occurred), %g2
+	lduw		[%g2 + %lo(dcache_parity_tl1_occurred)], %g1
+	add		%g1, 1, %g1
+	stw		%g1, [%g2 + %lo(dcache_parity_tl1_occurred)]
 	/* Reset D-cache parity */
 	sethi		%hi(1 << 16), %g1	! D-cache size
 	mov		(1 << 5), %g2		! D-cache line size
@@ -1121,6 +949,10 @@ do_icpe_tl1:
 	 nop
 	wrpr		%g1, %tl		! Restore original trap level
 do_icpe_tl1_nonfatal:	/* Ok we may use interrupt globals safely. */
+	sethi		%hi(icache_parity_tl1_occurred), %g2
+	lduw		[%g2 + %lo(icache_parity_tl1_occurred)], %g1
+	add		%g1, 1, %g1
+	stw		%g1, [%g2 + %lo(icache_parity_tl1_occurred)]
 	/* Flush I-cache */
 	sethi		%hi(1 << 15), %g1	! I-cache size
 	mov		(1 << 5), %g2		! I-cache line size
diff --git a/arch/sparc64/kernel/etrap.S b/arch/sparc64/kernel/etrap.S
index 50d2af1d98ae..0d8eba21111b 100644
--- a/arch/sparc64/kernel/etrap.S
+++ b/arch/sparc64/kernel/etrap.S
@@ -68,12 +68,8 @@ etrap_irq:
 
 		wrpr	%g3, 0, %otherwin
 		wrpr	%g2, 0, %wstate
-cplus_etrap_insn_1:
-		sethi	%hi(0), %g3
-		sllx	%g3, 32, %g3
-cplus_etrap_insn_2:
-		sethi	%hi(0), %g2
-		or	%g3, %g2, %g3
+		sethi	%hi(sparc64_kern_pri_context), %g2
+		ldx	[%g2 + %lo(sparc64_kern_pri_context)], %g3
 		stxa	%g3, [%l4] ASI_DMMU
 		flush	%l6
 		wr	%g0, ASI_AIUS, %asi
@@ -215,12 +211,8 @@ scetrap:	rdpr	%pil, %g2
 		mov	PRIMARY_CONTEXT, %l4
 		wrpr	%g3, 0, %otherwin
 		wrpr	%g2, 0, %wstate
-cplus_etrap_insn_3:
-		sethi	%hi(0), %g3
-		sllx	%g3, 32, %g3
-cplus_etrap_insn_4:
-		sethi	%hi(0), %g2
-		or	%g3, %g2, %g3
+		sethi	%hi(sparc64_kern_pri_context), %g2
+		ldx	[%g2 + %lo(sparc64_kern_pri_context)], %g3
 		stxa	%g3, [%l4] ASI_DMMU
 		flush	%l6
 
@@ -264,38 +256,3 @@ cplus_etrap_insn_4:
 
 #undef TASK_REGOFF
 #undef ETRAP_PSTATE1
-
-cplus_einsn_1:
-		sethi			%uhi(CTX_CHEETAH_PLUS_NUC), %g3
-cplus_einsn_2:
-		sethi			%hi(CTX_CHEETAH_PLUS_CTX0), %g2
-
-		.globl			cheetah_plus_patch_etrap
-cheetah_plus_patch_etrap:
-		/* We configure the dTLB512_0 for 4MB pages and the
-		 * dTLB512_1 for 8K pages when in context zero.
-		 */
-		sethi			%hi(cplus_einsn_1), %o0
-		sethi			%hi(cplus_etrap_insn_1), %o2
-		lduw			[%o0 + %lo(cplus_einsn_1)], %o1
-		or			%o2, %lo(cplus_etrap_insn_1), %o2
-		stw			%o1, [%o2]
-		flush			%o2
-		sethi			%hi(cplus_etrap_insn_3), %o2
-		or			%o2, %lo(cplus_etrap_insn_3), %o2
-		stw			%o1, [%o2]
-		flush			%o2
-
-		sethi			%hi(cplus_einsn_2), %o0
-		sethi			%hi(cplus_etrap_insn_2), %o2
-		lduw			[%o0 + %lo(cplus_einsn_2)], %o1
-		or			%o2, %lo(cplus_etrap_insn_2), %o2
-		stw			%o1, [%o2]
-		flush			%o2
-		sethi			%hi(cplus_etrap_insn_4), %o2
-		or			%o2, %lo(cplus_etrap_insn_4), %o2
-		stw			%o1, [%o2]
-		flush			%o2
-
-		retl
-		 nop
diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S
index 1fa06c4e3bdb..b49dcd4504b0 100644
--- a/arch/sparc64/kernel/head.S
+++ b/arch/sparc64/kernel/head.S
@@ -28,19 +28,14 @@
 #include <asm/mmu.h>
 	
 /* This section from from _start to sparc64_boot_end should fit into
- * 0x0000.0000.0040.4000 to 0x0000.0000.0040.8000 and will be sharing space
- * with bootup_user_stack, which is from 0x0000.0000.0040.4000 to
- * 0x0000.0000.0040.6000 and empty_bad_page, which is from
- * 0x0000.0000.0040.6000 to 0x0000.0000.0040.8000. 
+ * 0x0000000000404000 to 0x0000000000408000.
  */
-
 	.text
 	.globl	start, _start, stext, _stext
 _start:
 start:
 _stext:
 stext:
-bootup_user_stack:
 ! 0x0000000000404000
 	b	sparc64_boot
 	 flushw					/* Flush register file.      */
@@ -80,15 +75,169 @@ sparc_ramdisk_image64:
 	.xword	0
 	.word	_end
 
-	/* We must be careful, 32-bit OpenBOOT will get confused if it
-	 * tries to save away a register window to a 64-bit kernel
-	 * stack address.  Flush all windows, disable interrupts,
-	 * remap if necessary, jump onto kernel trap table, then kernel
-	 * stack, or else we die.
+	/* PROM cif handler code address is in %o4.  */
+sparc64_boot:
+1:	rd	%pc, %g7
+	set	1b, %g1
+	cmp	%g1, %g7
+	be,pn	%xcc, sparc64_boot_after_remap
+	 mov	%o4, %l7
+
+	/* We need to remap the kernel.  Use position independant
+	 * code to remap us to KERNBASE.
 	 *
-	 * PROM entry point is on %o4
+	 * SILO can invoke us with 32-bit address masking enabled,
+	 * so make sure that's clear.
 	 */
-sparc64_boot:
+	rdpr	%pstate, %g1
+	andn	%g1, PSTATE_AM, %g1
+	wrpr	%g1, 0x0, %pstate
+	ba,a,pt	%xcc, 1f
+
+	.globl	prom_finddev_name, prom_chosen_path
+	.globl	prom_getprop_name, prom_mmu_name
+	.globl	prom_callmethod_name, prom_translate_name
+	.globl	prom_map_name, prom_unmap_name, prom_mmu_ihandle_cache
+	.globl	prom_boot_mapped_pc, prom_boot_mapping_mode
+	.globl	prom_boot_mapping_phys_high, prom_boot_mapping_phys_low
+prom_finddev_name:
+	.asciz	"finddevice"
+prom_chosen_path:
+	.asciz	"/chosen"
+prom_getprop_name:
+	.asciz	"getprop"
+prom_mmu_name:
+	.asciz	"mmu"
+prom_callmethod_name:
+	.asciz	"call-method"
+prom_translate_name:
+	.asciz	"translate"
+prom_map_name:
+	.asciz	"map"
+prom_unmap_name:
+	.asciz	"unmap"
+	.align	4
+prom_mmu_ihandle_cache:
+	.word	0
+prom_boot_mapped_pc:
+	.word	0
+prom_boot_mapping_mode:
+	.word	0
+	.align	8
+prom_boot_mapping_phys_high:
+	.xword	0
+prom_boot_mapping_phys_low:
+	.xword	0
+1:
+	rd	%pc, %l0
+	mov	(1b - prom_finddev_name), %l1
+	mov	(1b - prom_chosen_path), %l2
+	mov	(1b - prom_boot_mapped_pc), %l3
+	sub	%l0, %l1, %l1
+	sub	%l0, %l2, %l2
+	sub	%l0, %l3, %l3
+	stw	%l0, [%l3]
+	sub	%sp, (192 + 128), %sp
+
+	/* chosen_node = prom_finddevice("/chosen") */
+	stx	%l1, [%sp + 2047 + 128 + 0x00]	! service, "finddevice"
+	mov	1, %l3
+	stx	%l3, [%sp + 2047 + 128 + 0x08]	! num_args, 1
+	stx	%l3, [%sp + 2047 + 128 + 0x10]	! num_rets, 1
+	stx	%l2, [%sp + 2047 + 128 + 0x18]	! arg1, "/chosen"
+	stx	%g0, [%sp + 2047 + 128 + 0x20]	! ret1
+	call	%l7
+	 add	%sp, (2047 + 128), %o0		! argument array
+
+	ldx	[%sp + 2047 + 128 + 0x20], %l4	! chosen device node
+
+	mov	(1b - prom_getprop_name), %l1
+	mov	(1b - prom_mmu_name), %l2
+	mov	(1b - prom_mmu_ihandle_cache), %l5
+	sub	%l0, %l1, %l1
+	sub	%l0, %l2, %l2
+	sub	%l0, %l5, %l5
+
+	/* prom_mmu_ihandle_cache = prom_getint(chosen_node, "mmu") */
+	stx	%l1, [%sp + 2047 + 128 + 0x00]	! service, "getprop"
+	mov	4, %l3
+	stx	%l3, [%sp + 2047 + 128 + 0x08]	! num_args, 4
+	mov	1, %l3
+	stx	%l3, [%sp + 2047 + 128 + 0x10]	! num_rets, 1
+	stx	%l4, [%sp + 2047 + 128 + 0x18]	! arg1, chosen_node
+	stx	%l2, [%sp + 2047 + 128 + 0x20]	! arg2, "mmu"
+	stx	%l5, [%sp + 2047 + 128 + 0x28]	! arg3, &prom_mmu_ihandle_cache
+	mov	4, %l3
+	stx	%l3, [%sp + 2047 + 128 + 0x30]	! arg4, sizeof(arg3)
+	stx	%g0, [%sp + 2047 + 128 + 0x38]	! ret1
+	call	%l7
+	 add	%sp, (2047 + 128), %o0		! argument array
+
+	mov	(1b - prom_callmethod_name), %l1
+	mov	(1b - prom_translate_name), %l2
+	sub	%l0, %l1, %l1
+	sub	%l0, %l2, %l2
+	lduw	[%l5], %l5			! prom_mmu_ihandle_cache
+
+	stx	%l1, [%sp + 2047 + 128 + 0x00]	! service, "call-method"
+	mov	3, %l3
+	stx	%l3, [%sp + 2047 + 128 + 0x08]	! num_args, 3
+	mov	5, %l3
+	stx	%l3, [%sp + 2047 + 128 + 0x10]	! num_rets, 5
+	stx	%l2, [%sp + 2047 + 128 + 0x18]	! arg1: "translate"
+	stx	%l5, [%sp + 2047 + 128 + 0x20]	! arg2: prom_mmu_ihandle_cache
+	/* PAGE align */
+	srlx	%l0, 13, %l3
+	sllx	%l3, 13, %l3
+	stx	%l3, [%sp + 2047 + 128 + 0x28]	! arg3: vaddr, our PC
+	stx	%g0, [%sp + 2047 + 128 + 0x30]	! res1
+	stx	%g0, [%sp + 2047 + 128 + 0x38]	! res2
+	stx	%g0, [%sp + 2047 + 128 + 0x40]	! res3
+	stx	%g0, [%sp + 2047 + 128 + 0x48]	! res4
+	stx	%g0, [%sp + 2047 + 128 + 0x50]	! res5
+	call	%l7
+	 add	%sp, (2047 + 128), %o0		! argument array
+
+	ldx	[%sp + 2047 + 128 + 0x40], %l1	! translation mode
+	mov	(1b - prom_boot_mapping_mode), %l4
+	sub	%l0, %l4, %l4
+	stw	%l1, [%l4]
+	mov	(1b - prom_boot_mapping_phys_high), %l4
+	sub	%l0, %l4, %l4
+	ldx	[%sp + 2047 + 128 + 0x48], %l2	! physaddr high
+	stx	%l2, [%l4 + 0x0]
+	ldx	[%sp + 2047 + 128 + 0x50], %l3	! physaddr low
+	/* 4MB align */
+	srlx	%l3, 22, %l3
+	sllx	%l3, 22, %l3
+	stx	%l3, [%l4 + 0x8]
+
+	/* Leave service as-is, "call-method" */
+	mov	7, %l3
+	stx	%l3, [%sp + 2047 + 128 + 0x08]	! num_args, 7
+	mov	1, %l3
+	stx	%l3, [%sp + 2047 + 128 + 0x10]	! num_rets, 1
+	mov	(1b - prom_map_name), %l3
+	sub	%l0, %l3, %l3
+	stx	%l3, [%sp + 2047 + 128 + 0x18]	! arg1: "map"
+	/* Leave arg2 as-is, prom_mmu_ihandle_cache */
+	mov	-1, %l3
+	stx	%l3, [%sp + 2047 + 128 + 0x28]	! arg3: mode (-1 default)
+	sethi	%hi(8 * 1024 * 1024), %l3
+	stx	%l3, [%sp + 2047 + 128 + 0x30]	! arg4: size (8MB)
+	sethi	%hi(KERNBASE), %l3
+	stx	%l3, [%sp + 2047 + 128 + 0x38]	! arg5: vaddr (KERNBASE)
+	stx	%g0, [%sp + 2047 + 128 + 0x40]	! arg6: empty
+	mov	(1b - prom_boot_mapping_phys_low), %l3
+	sub	%l0, %l3, %l3
+	ldx	[%l3], %l3
+	stx	%l3, [%sp + 2047 + 128 + 0x48]	! arg7: phys addr
+	call	%l7
+	 add	%sp, (2047 + 128), %o0		! argument array
+
+	add	%sp, (192 + 128), %sp
+
+sparc64_boot_after_remap:
 	BRANCH_IF_CHEETAH_BASE(g1,g7,cheetah_boot)
 	BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g1,g7,cheetah_plus_boot)
 	ba,pt	%xcc, spitfire_boot
@@ -125,185 +274,7 @@ cheetah_generic_boot:
 	stxa	%g0, [%g3] ASI_IMMU
 	membar	#Sync
 
-	wrpr    %g0, (PSTATE_PRIV|PSTATE_PEF|PSTATE_IE), %pstate
-	wr	%g0, 0, %fprs
-
-	/* Just like for Spitfire, we probe itlb-2 for a mapping which
-	 * matches our current %pc.  We take the physical address in
-	 * that mapping and use it to make our own.
-	 */
-
-	/* %g5 holds the tlb data */
-        sethi   %uhi(_PAGE_VALID | _PAGE_SZ4MB), %g5
-        sllx    %g5, 32, %g5
-        or      %g5, (_PAGE_CP | _PAGE_CV | _PAGE_P | _PAGE_L | _PAGE_W | _PAGE_G), %g5
-
-	/* Put PADDR tlb data mask into %g3. */
-	sethi	%uhi(_PAGE_PADDR), %g3
-	or	%g3, %ulo(_PAGE_PADDR), %g3
-	sllx	%g3, 32, %g3
-	sethi	%hi(_PAGE_PADDR), %g7
-	or	%g7, %lo(_PAGE_PADDR), %g7
-	or	%g3, %g7, %g3
-
-	set	2 << 16, %l0		/* TLB entry walker. */
-	set	0x1fff, %l2		/* Page mask. */
-	rd	%pc, %l3
-	andn	%l3, %l2, %g2		/* vaddr comparator */
-
-1:	ldxa	[%l0] ASI_ITLB_TAG_READ, %g1
-	membar	#Sync
-	andn	%g1, %l2, %g1
-	cmp	%g1, %g2
-	be,pn	%xcc, cheetah_got_tlbentry
-	 nop
-	and	%l0, (127 << 3), %g1
-	cmp	%g1, (127 << 3)
-	blu,pt	%xcc, 1b
-	 add	%l0, (1 << 3), %l0
-
-	/* Search the small TLB.  OBP never maps us like that but
-	 * newer SILO can.
-	 */
-	clr	%l0
-
-1:	ldxa	[%l0] ASI_ITLB_TAG_READ, %g1
-	membar	#Sync
-	andn	%g1, %l2, %g1
-	cmp	%g1, %g2
-	be,pn	%xcc, cheetah_got_tlbentry
-	 nop
-	cmp	%l0, (15 << 3)
-	blu,pt	%xcc, 1b
-	 add	%l0, (1 << 3), %l0
-
-	/* BUG() if we get here... */
-	ta	0x5
-
-cheetah_got_tlbentry:
-	ldxa	[%l0] ASI_ITLB_DATA_ACCESS, %g0
-	ldxa	[%l0] ASI_ITLB_DATA_ACCESS, %g1
-	membar	#Sync
-	and	%g1, %g3, %g1
-	set	0x5fff, %l0
-	andn	%g1, %l0, %g1
-	or	%g5, %g1, %g5
-
-	/* Clear out any KERNBASE area entries. */
-	set	2 << 16, %l0
-	sethi	%hi(KERNBASE), %g3
-	sethi	%hi(KERNBASE<<1), %g7
-	mov	TLB_TAG_ACCESS, %l7
-
-	/* First, check ITLB */
-1:	ldxa	[%l0] ASI_ITLB_TAG_READ, %g1
-	membar	#Sync
-	andn	%g1, %l2, %g1
-	cmp	%g1, %g3
-	blu,pn	%xcc, 2f
-	 cmp	%g1, %g7
-	bgeu,pn	%xcc, 2f
-	 nop
-	stxa	%g0, [%l7] ASI_IMMU
-	membar	#Sync
-	stxa	%g0, [%l0] ASI_ITLB_DATA_ACCESS
-	membar	#Sync
-
-2:	and	%l0, (127 << 3), %g1
-	cmp	%g1, (127 << 3)
-	blu,pt	%xcc, 1b
-	 add	%l0, (1 << 3), %l0
-
-	/* Next, check DTLB */
-	set	2 << 16, %l0
-1:	ldxa	[%l0] ASI_DTLB_TAG_READ, %g1
-	membar	#Sync
-	andn	%g1, %l2, %g1
-	cmp	%g1, %g3
-	blu,pn	%xcc, 2f
-	 cmp	%g1, %g7
-	bgeu,pn	%xcc, 2f
-	 nop
-	stxa	%g0, [%l7] ASI_DMMU
-	membar	#Sync
-	stxa	%g0, [%l0] ASI_DTLB_DATA_ACCESS
-	membar	#Sync
-	
-2:	and	%l0, (511 << 3), %g1
-	cmp	%g1, (511 << 3)
-	blu,pt	%xcc, 1b
-	 add	%l0, (1 << 3), %l0
-
-	/* On Cheetah+, have to check second DTLB.  */
-	BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g1,l0,2f)
-	ba,pt	%xcc, 9f
-	 nop
-
-2:	set	3 << 16, %l0
-1:	ldxa	[%l0] ASI_DTLB_TAG_READ, %g1
-	membar	#Sync
-	andn	%g1, %l2, %g1
-	cmp	%g1, %g3
-	blu,pn	%xcc, 2f
-	 cmp	%g1, %g7
-	bgeu,pn	%xcc, 2f
-	 nop
-	stxa	%g0, [%l7] ASI_DMMU
-	membar	#Sync
-	stxa	%g0, [%l0] ASI_DTLB_DATA_ACCESS
-	membar	#Sync
-	
-2:	and	%l0, (511 << 3), %g1
-	cmp	%g1, (511 << 3)
-	blu,pt	%xcc, 1b
-	 add	%l0, (1 << 3), %l0
-
-9:
-
-	/* Now lock the TTE we created into ITLB-0 and DTLB-0,
-	 * entry 15 (and maybe 14 too).
-	 */
-	sethi	%hi(KERNBASE), %g3
-	set	(0 << 16) | (15 << 3), %g7
-	stxa	%g3, [%l7] ASI_DMMU
-	membar	#Sync
-	stxa	%g5, [%g7] ASI_DTLB_DATA_ACCESS
-	membar	#Sync
-	stxa	%g3, [%l7] ASI_IMMU
-	membar	#Sync
-	stxa	%g5, [%g7] ASI_ITLB_DATA_ACCESS
-	membar	#Sync
-	flush	%g3
-	membar	#Sync
-	sethi	%hi(_end), %g3			/* Check for bigkernel case */
-	or	%g3, %lo(_end), %g3
-	srl	%g3, 23, %g3			/* Check if _end > 8M */
-	brz,pt	%g3, 1f
-	 sethi	%hi(KERNBASE), %g3		/* Restore for fixup code below */
-	sethi	%hi(0x400000), %g3
-	or	%g3, %lo(0x400000), %g3
-	add	%g5, %g3, %g5			/* New tte data */
-	andn	%g5, (_PAGE_G), %g5
-	sethi	%hi(KERNBASE+0x400000), %g3
-	or	%g3, %lo(KERNBASE+0x400000), %g3
-	set	(0 << 16) | (14 << 3), %g7
-	stxa	%g3, [%l7] ASI_DMMU
-	membar	#Sync
-	stxa	%g5, [%g7] ASI_DTLB_DATA_ACCESS
-	membar	#Sync
-	stxa	%g3, [%l7] ASI_IMMU
-	membar	#Sync
-	stxa	%g5, [%g7] ASI_ITLB_DATA_ACCESS
-	membar	#Sync
-	flush	%g3
-	membar	#Sync
-	sethi	%hi(KERNBASE), %g3		/* Restore for fixup code below */
-	ba,pt	%xcc, 1f
-	 nop
-
-1:	set	sun4u_init, %g2
-	jmpl    %g2 + %g0, %g0
-	 nop
+	ba,a,pt	%xcc, jump_to_sun4u_init
 
 spitfire_boot:
 	/* Typically PROM has already enabled both MMU's and both on-chip
@@ -313,6 +284,7 @@ spitfire_boot:
 	stxa	%g1, [%g0] ASI_LSU_CONTROL
 	membar	#Sync
 
+jump_to_sun4u_init:
 	/*
 	 * Make sure we are in privileged mode, have address masking,
          * using the ordinary globals and have enabled floating
@@ -324,151 +296,6 @@ spitfire_boot:
 	wrpr    %g0, (PSTATE_PRIV|PSTATE_PEF|PSTATE_IE), %pstate
 	wr	%g0, 0, %fprs
 
-spitfire_create_mappings:
-	/* %g5 holds the tlb data */
-        sethi   %uhi(_PAGE_VALID | _PAGE_SZ4MB), %g5
-        sllx    %g5, 32, %g5
-        or      %g5, (_PAGE_CP | _PAGE_CV | _PAGE_P | _PAGE_L | _PAGE_W | _PAGE_G), %g5
-
-	/* Base of physical memory cannot reliably be assumed to be
-	 * at 0x0!  Figure out where it happens to be. -DaveM
-	 */
-
-	/* Put PADDR tlb data mask into %g3. */
-	sethi	%uhi(_PAGE_PADDR_SF), %g3
-	or	%g3, %ulo(_PAGE_PADDR_SF), %g3
-	sllx	%g3, 32, %g3
-	sethi	%hi(_PAGE_PADDR_SF), %g7
-	or	%g7, %lo(_PAGE_PADDR_SF), %g7
-	or	%g3, %g7, %g3
-
-	/* Walk through entire ITLB, looking for entry which maps
-	 * our %pc currently, stick PADDR from there into %g5 tlb data.
-	 */
-	clr	%l0			/* TLB entry walker. */
-	set	0x1fff, %l2		/* Page mask. */
-	rd	%pc, %l3
-	andn	%l3, %l2, %g2		/* vaddr comparator */
-1:
-	/* Yes, the nops seem to be necessary for now, don't ask me why. -DaveM */
-	ldxa	[%l0] ASI_ITLB_TAG_READ, %g1
-	nop
-	nop
-	nop
-	andn	%g1, %l2, %g1		/* Get vaddr */
-	cmp	%g1, %g2
-	be,a,pn	%xcc, spitfire_got_tlbentry
-	 ldxa	[%l0] ASI_ITLB_DATA_ACCESS, %g1
-	cmp	%l0, (63 << 3)
-	blu,pt	%xcc, 1b
-	 add	%l0, (1 << 3), %l0
-
-	/* BUG() if we get here... */
-	ta	0x5
-
-spitfire_got_tlbentry:
-	/* Nops here again, perhaps Cheetah/Blackbird are better behaved... */
-	nop
-	nop
-	nop
-	and	%g1, %g3, %g1		/* Mask to just get paddr bits.       */
-	set	0x5fff, %l3		/* Mask offset to get phys base.      */
-	andn	%g1, %l3, %g1
-
-	/* NOTE: We hold on to %g1 paddr base as we need it below to lock
-	 * NOTE: the PROM cif code into the TLB.
-	 */
-
-	or	%g5, %g1, %g5		/* Or it into TAG being built.        */
-
-	clr	%l0			/* TLB entry walker. */
-	sethi	%hi(KERNBASE), %g3	/* 4M lower limit */
-	sethi	%hi(KERNBASE<<1), %g7	/* 8M upper limit */
-	mov	TLB_TAG_ACCESS, %l7
-1:
-	/* Yes, the nops seem to be necessary for now, don't ask me why. -DaveM */
-	ldxa	[%l0] ASI_ITLB_TAG_READ, %g1
-	nop
-	nop
-	nop
-	andn	%g1, %l2, %g1		/* Get vaddr */
-	cmp	%g1, %g3
-	blu,pn	%xcc, 2f
-	 cmp	%g1, %g7
-	bgeu,pn	%xcc, 2f
-	 nop
-	stxa	%g0, [%l7] ASI_IMMU
-	stxa	%g0, [%l0] ASI_ITLB_DATA_ACCESS
-	membar	#Sync
-2:
-	cmp	%l0, (63 << 3)
-	blu,pt	%xcc, 1b
-	 add	%l0, (1 << 3), %l0
-
-	nop; nop; nop
-
-	clr	%l0			/* TLB entry walker. */
-1:
-	/* Yes, the nops seem to be necessary for now, don't ask me why. -DaveM */
-	ldxa	[%l0] ASI_DTLB_TAG_READ, %g1
-	nop
-	nop
-	nop
-	andn	%g1, %l2, %g1		/* Get vaddr */
-	cmp	%g1, %g3
-	blu,pn	%xcc, 2f
-	 cmp	%g1, %g7
-	bgeu,pn	%xcc, 2f
-	 nop
-	stxa	%g0, [%l7] ASI_DMMU
-	stxa	%g0, [%l0] ASI_DTLB_DATA_ACCESS
-	membar	#Sync
-2:
-	cmp	%l0, (63 << 3)
-	blu,pt	%xcc, 1b
-	 add	%l0, (1 << 3), %l0
-
-	nop; nop; nop
-
-
-	/* PROM never puts any TLB entries into the MMU with the lock bit
-	 * set.  So we gladly use tlb entry 63 for KERNBASE. And maybe 62 too.
-	 */
-
-	sethi	%hi(KERNBASE), %g3
-	mov	(63 << 3), %g7
-	stxa	%g3, [%l7] ASI_DMMU		/* KERNBASE into TLB TAG	*/
-	stxa	%g5, [%g7] ASI_DTLB_DATA_ACCESS	/* TTE into TLB DATA		*/
-	membar	#Sync
-	stxa	%g3, [%l7] ASI_IMMU		/* KERNBASE into TLB TAG	*/
-	stxa	%g5, [%g7] ASI_ITLB_DATA_ACCESS	/* TTE into TLB DATA		*/
-	membar	#Sync
-	flush	%g3
-	membar	#Sync
-	sethi	%hi(_end), %g3			/* Check for bigkernel case */
-	or	%g3, %lo(_end), %g3
-	srl	%g3, 23, %g3			/* Check if _end > 8M */
-	brz,pt	%g3, 2f
-	 sethi	%hi(KERNBASE), %g3		/* Restore for fixup code below */
-	sethi	%hi(0x400000), %g3
-	or	%g3, %lo(0x400000), %g3
-	add	%g5, %g3, %g5			/* New tte data */
-	andn	%g5, (_PAGE_G), %g5
-	sethi	%hi(KERNBASE+0x400000), %g3
-	or	%g3, %lo(KERNBASE+0x400000), %g3
-	mov	(62 << 3), %g7
-	stxa	%g3, [%l7] ASI_DMMU
-	stxa	%g5, [%g7] ASI_DTLB_DATA_ACCESS
-	membar	#Sync
-	stxa	%g3, [%l7] ASI_IMMU
-	stxa	%g5, [%g7] ASI_ITLB_DATA_ACCESS
-	membar	#Sync
-	flush	%g3
-	membar	#Sync
-	sethi	%hi(KERNBASE), %g3		/* Restore for fixup code below */
-2:	ba,pt	%xcc, 1f
-	 nop
-1:
 	set	sun4u_init, %g2
 	jmpl    %g2 + %g0, %g0
 	 nop
@@ -483,38 +310,12 @@ sun4u_init:
 	stxa	%g0, [%g7] ASI_DMMU
 	membar	#Sync
 
-	/* We are now safely (we hope) in Nucleus context (0), rewrite
-	 * the KERNBASE TTE's so they no longer have the global bit set.
-	 * Don't forget to setup TAG_ACCESS first 8-)
-	 */
-	mov	TLB_TAG_ACCESS, %g2
-	stxa	%g3, [%g2] ASI_IMMU
-	stxa	%g3, [%g2] ASI_DMMU
-	membar	#Sync
-
 	BRANCH_IF_ANY_CHEETAH(g1,g7,cheetah_tlb_fixup)
 
 	ba,pt	%xcc, spitfire_tlb_fixup
 	 nop
 
 cheetah_tlb_fixup:
-	set	(0 << 16) | (15 << 3), %g7
-	ldxa	[%g7] ASI_ITLB_DATA_ACCESS, %g0
-	ldxa	[%g7] ASI_ITLB_DATA_ACCESS, %g1
-	andn	%g1, (_PAGE_G), %g1
-	stxa	%g1, [%g7] ASI_ITLB_DATA_ACCESS
-	membar	#Sync
-
-	ldxa	[%g7] ASI_DTLB_DATA_ACCESS, %g0
-	ldxa	[%g7] ASI_DTLB_DATA_ACCESS, %g1
-	andn	%g1, (_PAGE_G), %g1
-	stxa	%g1, [%g7] ASI_DTLB_DATA_ACCESS
-	membar	#Sync
-
-	/* Kill instruction prefetch queues. */
-	flush	%g3
-	membar	#Sync
-
 	mov	2, %g2		/* Set TLB type to cheetah+. */
 	BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g1,g7,1f)
 
@@ -523,23 +324,7 @@ cheetah_tlb_fixup:
 1:	sethi	%hi(tlb_type), %g1
 	stw	%g2, [%g1 + %lo(tlb_type)]
 
-	BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g1,g7,1f)
-	ba,pt	%xcc, 2f
-	 nop
-
-1:	/* Patch context register writes to support nucleus page
-	 * size correctly.
-	 */
-	call	cheetah_plus_patch_etrap
-	 nop
-	call	cheetah_plus_patch_rtrap
-	 nop
-	call	cheetah_plus_patch_fpdis
-	 nop
-	call	cheetah_plus_patch_winfixup
-	 nop
-
-2:	/* Patch copy/page operations to cheetah optimized versions. */
+	/* Patch copy/page operations to cheetah optimized versions. */
 	call	cheetah_patch_copyops
 	 nop
 	call	cheetah_patch_copy_page
@@ -551,21 +336,6 @@ cheetah_tlb_fixup:
 	 nop
 
 spitfire_tlb_fixup:
-	mov	(63 << 3), %g7
-	ldxa	[%g7] ASI_ITLB_DATA_ACCESS, %g1
-	andn	%g1, (_PAGE_G), %g1
-	stxa	%g1, [%g7] ASI_ITLB_DATA_ACCESS
-	membar	#Sync
-
-	ldxa	[%g7] ASI_DTLB_DATA_ACCESS, %g1
-	andn	%g1, (_PAGE_G), %g1
-	stxa	%g1, [%g7] ASI_DTLB_DATA_ACCESS
-	membar	#Sync
-
-	/* Kill instruction prefetch queues. */
-	flush	%g3
-	membar	#Sync
-
 	/* Set TLB type to spitfire. */
 	mov	0, %g2
 	sethi	%hi(tlb_type), %g1
@@ -578,24 +348,6 @@ tlb_fixup_done:
 	mov	%sp, %l6
 	mov	%o4, %l7
 
-#if 0	/* We don't do it like this anymore, but for historical hack value
-	 * I leave this snippet here to show how crazy we can be sometimes. 8-)
-	 */
-
-	/* Setup "Linux Current Register", thanks Sun 8-) */
-	wr	%g0, 0x1, %pcr
-
-	/* Blackbird errata workaround.  See commentary in
-	 * smp.c:smp_percpu_timer_interrupt() for more
-	 * information.
-	 */
-	ba,pt	%xcc, 99f
-	 nop
-	.align	64
-99:	wr	%g6, %g0, %pic
-	rd	%pic, %g0
-#endif
-
 	wr	%g0, ASI_P, %asi
 	mov	1, %g1
 	sllx	%g1, THREAD_SHIFT, %g1
@@ -629,32 +381,78 @@ tlb_fixup_done:
 	 nop
 	/* Not reached... */
 
-/* IMPORTANT NOTE: Whenever making changes here, check
- * trampoline.S as well. -jj */
-	.globl	setup_tba
-setup_tba:	/* i0 = is_starfire */
-	save	%sp, -160, %sp
+	/* This is meant to allow the sharing of this code between
+	 * boot processor invocation (via setup_tba() below) and
+	 * secondary processor startup (via trampoline.S).  The
+	 * former does use this code, the latter does not yet due
+	 * to some complexities.  That should be fixed up at some
+	 * point.
+	 *
+	 * There used to be enormous complexity wrt. transferring
+	 * over from the firwmare's trap table to the Linux kernel's.
+	 * For example, there was a chicken & egg problem wrt. building
+	 * the OBP page tables, yet needing to be on the Linux kernel
+	 * trap table (to translate PAGE_OFFSET addresses) in order to
+	 * do that.
+	 *
+	 * We now handle OBP tlb misses differently, via linear lookups
+	 * into the prom_trans[] array.  So that specific problem no
+	 * longer exists.  Yet, unfortunately there are still some issues
+	 * preventing trampoline.S from using this code... ho hum.
+	 */
+	.globl	setup_trap_table
+setup_trap_table:
+	save	%sp, -192, %sp
 
-	rdpr	%tba, %g7
-	sethi	%hi(prom_tba), %o1
-	or	%o1, %lo(prom_tba), %o1
-	stx	%g7, [%o1]
+	/* Force interrupts to be disabled. */
+	rdpr	%pstate, %o1
+	andn	%o1, PSTATE_IE, %o1
+	wrpr	%o1, 0x0, %pstate
+	wrpr	%g0, 15, %pil
+
+	/* Make the firmware call to jump over to the Linux trap table.  */
+	call	prom_set_trap_table
+	 sethi	%hi(sparc64_ttable_tl0), %o0
+
+	/* Start using proper page size encodings in ctx register.  */
+	sethi	%hi(sparc64_kern_pri_context), %g3
+	ldx	[%g3 + %lo(sparc64_kern_pri_context)], %g2
+	mov	PRIMARY_CONTEXT, %g1
+	stxa	%g2, [%g1] ASI_DMMU
+	membar	#Sync
+
+	/* The Linux trap handlers expect various trap global registers
+	 * to be setup with some fixed values.  So here we set these
+	 * up very carefully.  These globals are:
+	 *
+	 * Alternate Globals (PSTATE_AG):
+	 *
+	 * %g6			--> current_thread_info()
+	 *
+	 * MMU Globals (PSTATE_MG):
+	 *
+	 * %g1			--> TLB_SFSR
+	 * %g2			--> ((_PAGE_VALID | _PAGE_SZ4MB |
+	 *			      _PAGE_CP | _PAGE_CV | _PAGE_P | _PAGE_W)
+	 *			     ^ 0xfffff80000000000)
+	 * (this %g2 value is used for computing the PAGE_OFFSET kernel
+	 *  TLB entries quickly, the virtual address of the fault XOR'd
+	 *  with this %g2 value is the PTE to load into the TLB)
+	 * %g3			--> VPTE_BASE_CHEETAH or VPTE_BASE_SPITFIRE
+	 *
+	 * Interrupt Globals (PSTATE_IG, setup by init_irqwork_curcpu()):
+	 *
+	 * %g6			--> __irq_work[smp_processor_id()]
+	 */
 
-	/* Setup "Linux" globals 8-) */
 	rdpr	%pstate, %o1
 	mov	%g6, %o2
-	wrpr	%o1, (PSTATE_AG|PSTATE_IE), %pstate
-	sethi	%hi(sparc64_ttable_tl0), %g1
-	wrpr	%g1, %tba
+	wrpr	%o1, PSTATE_AG, %pstate
 	mov	%o2, %g6
 
-	/* Set up MMU globals */
-	wrpr	%o1, (PSTATE_MG|PSTATE_IE), %pstate
-
-	/* Set fixed globals used by dTLB miss handler. */
 #define KERN_HIGHBITS		((_PAGE_VALID|_PAGE_SZ4MB)^0xfffff80000000000)
 #define KERN_LOWBITS		(_PAGE_CP | _PAGE_CV | _PAGE_P | _PAGE_W)
-
+	wrpr	%o1, PSTATE_MG, %pstate
 	mov	TSB_REG, %g1
 	stxa	%g0, [%g1] ASI_DMMU
 	membar	#Sync
@@ -666,17 +464,17 @@ setup_tba:	/* i0 = is_starfire */
 	sllx	%g2, 32, %g2
 	or	%g2, KERN_LOWBITS, %g2
 
-	BRANCH_IF_ANY_CHEETAH(g3,g7,cheetah_vpte_base)
-	ba,pt	%xcc, spitfire_vpte_base
+	BRANCH_IF_ANY_CHEETAH(g3,g7,8f)
+	ba,pt	%xcc, 9f
 	 nop
 
-cheetah_vpte_base:
+8:
 	sethi		%uhi(VPTE_BASE_CHEETAH), %g3
 	or		%g3, %ulo(VPTE_BASE_CHEETAH), %g3
 	ba,pt		%xcc, 2f
 	 sllx		%g3, 32, %g3
 
-spitfire_vpte_base:
+9:
 	sethi		%uhi(VPTE_BASE_SPITFIRE), %g3
 	or		%g3, %ulo(VPTE_BASE_SPITFIRE), %g3
 	sllx		%g3, 32, %g3
@@ -702,48 +500,55 @@ spitfire_vpte_base:
 	sllx	%o2, 32, %o2
 	wr	%o2, %asr25
 
-	/* Ok, we're done setting up all the state our trap mechanims needs,
-	 * now get back into normal globals and let the PROM know what is up.
-	 */
 2:
 	wrpr	%g0, %g0, %wstate
-	wrpr	%o1, PSTATE_IE, %pstate
+	wrpr	%o1, 0x0, %pstate
 
 	call	init_irqwork_curcpu
 	 nop
 
-	call	prom_set_trap_table
-	 sethi	%hi(sparc64_ttable_tl0), %o0
-
-	BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g2,g3,1f)
-	ba,pt	%xcc, 2f
-	 nop
-
-1:	/* Start using proper page size encodings in ctx register.  */
-	sethi	%uhi(CTX_CHEETAH_PLUS_NUC), %g3
-	mov	PRIMARY_CONTEXT, %g1
-	sllx	%g3, 32, %g3
-	sethi	%hi(CTX_CHEETAH_PLUS_CTX0), %g2
-	or	%g3, %g2, %g3
-	stxa	%g3, [%g1] ASI_DMMU
-	membar	#Sync
-
-2:
+	/* Now we can turn interrupts back on. */
 	rdpr	%pstate, %o1
 	or	%o1, PSTATE_IE, %o1
 	wrpr	%o1, 0, %pstate
+	wrpr	%g0, 0x0, %pil
+
+	ret
+	 restore
+
+	.globl	setup_tba
+setup_tba:	/* i0 = is_starfire */
+	save	%sp, -192, %sp
+
+	/* The boot processor is the only cpu which invokes this
+	 * routine, the other cpus set things up via trampoline.S.
+	 * So save the OBP trap table address here.
+	 */
+	rdpr	%tba, %g7
+	sethi	%hi(prom_tba), %o1
+	or	%o1, %lo(prom_tba), %o1
+	stx	%g7, [%o1]
+
+	call	setup_trap_table
+	 nop
 
 	ret
 	 restore
+sparc64_boot_end:
+
+#include "systbls.S"
+#include "ktlb.S"
+#include "etrap.S"
+#include "rtrap.S"
+#include "winfixup.S"
+#include "entry.S"
 
 /*
- * The following skips make sure the trap table in ttable.S is aligned
+ * The following skip makes sure the trap table in ttable.S is aligned
  * on a 32K boundary as required by the v9 specs for TBA register.
  */
-sparc64_boot_end:
-	.skip	0x2000 + _start - sparc64_boot_end
-bootup_user_stack_end:
-	.skip	0x2000
+1:
+	.skip	0x4000 + _start - 1b
 
 #ifdef CONFIG_SBUS
 /* This is just a hack to fool make depend config.h discovering
@@ -755,20 +560,6 @@ bootup_user_stack_end:
 ! 0x0000000000408000
 
 #include "ttable.S"
-#include "systbls.S"
-
-	.align	1024
-	.globl	swapper_pg_dir
-swapper_pg_dir:
-	.word	0
-
-#include "etrap.S"
-#include "rtrap.S"
-#include "winfixup.S"
-#include "entry.S"
-
-	/* This is just anal retentiveness on my part... */
-	.align	16384
 
 	.data
 	.align	8
@@ -776,8 +567,11 @@ swapper_pg_dir:
 prom_tba:	.xword	0
 tlb_type:	.word	0	/* Must NOT end up in BSS */
 	.section	".fixup",#alloc,#execinstr
-	.globl	__ret_efault
+
+	.globl	__ret_efault, __retl_efault
 __ret_efault:
 	ret
 	 restore %g0, -EFAULT, %o0
-
+__retl_efault:
+	retl
+	 mov	-EFAULT, %o0
diff --git a/arch/sparc64/kernel/ioctl32.c b/arch/sparc64/kernel/ioctl32.c
index 43fc3173d480..196b208665a2 100644
--- a/arch/sparc64/kernel/ioctl32.c
+++ b/arch/sparc64/kernel/ioctl32.c
@@ -11,461 +11,13 @@
 
 #define INCLUDES
 #include "compat_ioctl.c"
-#include <linux/ncp_fs.h>
 #include <linux/syscalls.h>
-#include <asm/fbio.h>
-#include <asm/kbio.h>
-#include <asm/vuid_event.h>
-#include <asm/envctrl.h>
-#include <asm/display7seg.h>
-#include <asm/openpromio.h>
-#include <asm/audioio.h>
-#include <asm/watchdog.h>
-
-/* Use this to get at 32-bit user passed pointers. 
- * See sys_sparc32.c for description about it.
- */
-#define A(__x) compat_ptr(__x)
-
-static __inline__ void *alloc_user_space(long len)
-{
-	struct pt_regs *regs = current_thread_info()->kregs;
-	unsigned long usp = regs->u_regs[UREG_I6];
-
-	if (!(test_thread_flag(TIF_32BIT)))
-		usp += STACK_BIAS;
-
-	return (void *) (usp - len);
-}
 
 #define CODE
 #include "compat_ioctl.c"
 
-struct  fbcmap32 {
-	int             index;          /* first element (0 origin) */
-	int             count;
-	u32		red;
-	u32		green;
-	u32		blue;
-};
-
-#define FBIOPUTCMAP32	_IOW('F', 3, struct fbcmap32)
-#define FBIOGETCMAP32	_IOW('F', 4, struct fbcmap32)
-
-static int fbiogetputcmap(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	struct fbcmap32 __user *argp = (void __user *)arg;
-	struct fbcmap __user *p = compat_alloc_user_space(sizeof(*p));
-	u32 addr;
-	int ret;
-	
-	ret = copy_in_user(p, argp, 2 * sizeof(int));
-	ret |= get_user(addr, &argp->red);
-	ret |= put_user(compat_ptr(addr), &p->red);
-	ret |= get_user(addr, &argp->green);
-	ret |= put_user(compat_ptr(addr), &p->green);
-	ret |= get_user(addr, &argp->blue);
-	ret |= put_user(compat_ptr(addr), &p->blue);
-	if (ret)
-		return -EFAULT;
-	return sys_ioctl(fd, (cmd == FBIOPUTCMAP32) ? FBIOPUTCMAP_SPARC : FBIOGETCMAP_SPARC, (unsigned long)p);
-}
-
-struct fbcursor32 {
-	short set;		/* what to set, choose from the list above */
-	short enable;		/* cursor on/off */
-	struct fbcurpos pos;	/* cursor position */
-	struct fbcurpos hot;	/* cursor hot spot */
-	struct fbcmap32 cmap;	/* color map info */
-	struct fbcurpos size;	/* cursor bit map size */
-	u32	image;		/* cursor image bits */
-	u32	mask;		/* cursor mask bits */
-};
-	
-#define FBIOSCURSOR32	_IOW('F', 24, struct fbcursor32)
-#define FBIOGCURSOR32	_IOW('F', 25, struct fbcursor32)
-
-static int fbiogscursor(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	struct fbcursor __user *p = compat_alloc_user_space(sizeof(*p));
-	struct fbcursor32 __user *argp =  (void __user *)arg;
-	compat_uptr_t addr;
-	int ret;
-	
-	ret = copy_in_user(p, argp,
-			      2 * sizeof (short) + 2 * sizeof(struct fbcurpos));
-	ret |= copy_in_user(&p->size, &argp->size, sizeof(struct fbcurpos));
-	ret |= copy_in_user(&p->cmap, &argp->cmap, 2 * sizeof(int));
-	ret |= get_user(addr, &argp->cmap.red);
-	ret |= put_user(compat_ptr(addr), &p->cmap.red);
-	ret |= get_user(addr, &argp->cmap.green);
-	ret |= put_user(compat_ptr(addr), &p->cmap.green);
-	ret |= get_user(addr, &argp->cmap.blue);
-	ret |= put_user(compat_ptr(addr), &p->cmap.blue);
-	ret |= get_user(addr, &argp->mask);
-	ret |= put_user(compat_ptr(addr), &p->mask);
-	ret |= get_user(addr, &argp->image);
-	ret |= put_user(compat_ptr(addr), &p->image);
-	if (ret)
-		return -EFAULT;
-	return sys_ioctl (fd, FBIOSCURSOR, (unsigned long)p);
-}
-
-#if defined(CONFIG_DRM) || defined(CONFIG_DRM_MODULE)
-/* This really belongs in include/linux/drm.h -DaveM */
-#include "../../../drivers/char/drm/drm.h"
-
-typedef struct drm32_version {
-	int    version_major;	  /* Major version			    */
-	int    version_minor;	  /* Minor version			    */
-	int    version_patchlevel;/* Patch level			    */
-	int    name_len;	  /* Length of name buffer		    */
-	u32    name;		  /* Name of driver			    */
-	int    date_len;	  /* Length of date buffer		    */
-	u32    date;		  /* User-space buffer to hold date	    */
-	int    desc_len;	  /* Length of desc buffer		    */
-	u32    desc;		  /* User-space buffer to hold desc	    */
-} drm32_version_t;
-#define DRM32_IOCTL_VERSION    DRM_IOWR(0x00, drm32_version_t)
-
-static int drm32_version(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	drm32_version_t __user *uversion = (drm32_version_t __user *)arg;
-	drm_version_t __user *p = compat_alloc_user_space(sizeof(*p));
-	compat_uptr_t addr;
-	int n;
-	int ret;
-
-	if (clear_user(p, 3 * sizeof(int)) ||
-	    get_user(n, &uversion->name_len) ||
-	    put_user(n, &p->name_len) ||
-	    get_user(addr, &uversion->name) ||
-	    put_user(compat_ptr(addr), &p->name) ||
-	    get_user(n, &uversion->date_len) ||
-	    put_user(n, &p->date_len) ||
-	    get_user(addr, &uversion->date) ||
-	    put_user(compat_ptr(addr), &p->date) ||
-	    get_user(n, &uversion->desc_len) ||
-	    put_user(n, &p->desc_len) ||
-	    get_user(addr, &uversion->desc) ||
-	    put_user(compat_ptr(addr), &p->desc))
-		return -EFAULT;
-
-        ret = sys_ioctl(fd, DRM_IOCTL_VERSION, (unsigned long)p);
-	if (ret)
-		return ret;
-
-	if (copy_in_user(uversion, p, 3 * sizeof(int)) ||
-	    get_user(n, &p->name_len) ||
-	    put_user(n, &uversion->name_len) ||
-	    get_user(n, &p->date_len) ||
-	    put_user(n, &uversion->date_len) ||
-	    get_user(n, &p->desc_len) ||
-	    put_user(n, &uversion->desc_len))
-		return -EFAULT;
-
-	return 0;
-}
-
-typedef struct drm32_unique {
-	int	unique_len;	  /* Length of unique			    */
-	u32	unique;		  /* Unique name for driver instantiation   */
-} drm32_unique_t;
-#define DRM32_IOCTL_GET_UNIQUE DRM_IOWR(0x01, drm32_unique_t)
-#define DRM32_IOCTL_SET_UNIQUE DRM_IOW( 0x10, drm32_unique_t)
-
-static int drm32_getsetunique(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	drm32_unique_t __user *uarg = (drm32_unique_t __user *)arg;
-	drm_unique_t __user *p = compat_alloc_user_space(sizeof(*p));
-	compat_uptr_t addr;
-	int n;
-	int ret;
-
-	if (get_user(n, &uarg->unique_len) ||
-	    put_user(n, &p->unique_len) ||
-	    get_user(addr, &uarg->unique) ||
-	    put_user(compat_ptr(addr), &p->unique))
-		return -EFAULT;
-
-	if (cmd == DRM32_IOCTL_GET_UNIQUE)
-		ret = sys_ioctl (fd, DRM_IOCTL_GET_UNIQUE, (unsigned long)p);
-	else
-		ret = sys_ioctl (fd, DRM_IOCTL_SET_UNIQUE, (unsigned long)p);
-
-	if (ret)
-		return ret;
-
-	if (get_user(n, &p->unique_len) || put_user(n, &uarg->unique_len))
-		return -EFAULT;
-
-	return 0;
-}
-
-typedef struct drm32_map {
-	u32		offset;	 /* Requested physical address (0 for SAREA)*/
-	u32		size;	 /* Requested physical size (bytes)	    */
-	drm_map_type_t	type;	 /* Type of memory to map		    */
-	drm_map_flags_t flags;	 /* Flags				    */
-	u32		handle;  /* User-space: "Handle" to pass to mmap    */
-				 /* Kernel-space: kernel-virtual address    */
-	int		mtrr;	 /* MTRR slot used			    */
-				 /* Private data			    */
-} drm32_map_t;
-#define DRM32_IOCTL_ADD_MAP    DRM_IOWR(0x15, drm32_map_t)
-
-static int drm32_addmap(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	drm32_map_t __user *uarg = (drm32_map_t __user *) arg;
-	drm_map_t karg;
-	mm_segment_t old_fs;
-	u32 tmp;
-	int ret;
-
-	ret  = get_user(karg.offset, &uarg->offset);
-	ret |= get_user(karg.size, &uarg->size);
-	ret |= get_user(karg.type, &uarg->type);
-	ret |= get_user(karg.flags, &uarg->flags);
-	ret |= get_user(tmp, &uarg->handle);
-	ret |= get_user(karg.mtrr, &uarg->mtrr);
-	if (ret)
-		return -EFAULT;
-
-	karg.handle = (void *) (unsigned long) tmp;
-
-	old_fs = get_fs();
-	set_fs(KERNEL_DS);
-	ret = sys_ioctl(fd, DRM_IOCTL_ADD_MAP, (unsigned long) &karg);
-	set_fs(old_fs);
-
-	if (!ret) {
-		ret  = put_user(karg.offset, &uarg->offset);
-		ret |= put_user(karg.size, &uarg->size);
-		ret |= put_user(karg.type, &uarg->type);
-		ret |= put_user(karg.flags, &uarg->flags);
-		tmp = (u32) (long)karg.handle;
-		ret |= put_user(tmp, &uarg->handle);
-		ret |= put_user(karg.mtrr, &uarg->mtrr);
-		if (ret)
-			ret = -EFAULT;
-	}
-
-	return ret;
-}
-
-typedef struct drm32_buf_info {
-	int	       count;	/* Entries in list			     */
-	u32	       list;    /* (drm_buf_desc_t *) */ 
-} drm32_buf_info_t;
-#define DRM32_IOCTL_INFO_BUFS  DRM_IOWR(0x18, drm32_buf_info_t)
-
-static int drm32_info_bufs(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	drm32_buf_info_t __user *uarg = (drm32_buf_info_t __user *)arg;
-	drm_buf_info_t __user *p = compat_alloc_user_space(sizeof(*p));
-	compat_uptr_t addr;
-	int n;
-	int ret;
-
-	if (get_user(n, &uarg->count) || put_user(n, &p->count) ||
-	    get_user(addr, &uarg->list) || put_user(compat_ptr(addr), &p->list))
-		return -EFAULT;
-
-	ret = sys_ioctl(fd, DRM_IOCTL_INFO_BUFS, (unsigned long)p);
-	if (ret)
-		return ret;
-
-	if (get_user(n, &p->count) || put_user(n, &uarg->count))
-		return -EFAULT;
-
-	return 0;
-}
-
-typedef struct drm32_buf_free {
-	int	       count;
-	u32	       list;	/* (int *) */
-} drm32_buf_free_t;
-#define DRM32_IOCTL_FREE_BUFS  DRM_IOW( 0x1a, drm32_buf_free_t)
-
-static int drm32_free_bufs(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	drm32_buf_free_t __user *uarg = (drm32_buf_free_t __user *)arg;
-	drm_buf_free_t __user *p = compat_alloc_user_space(sizeof(*p));
-	compat_uptr_t addr;
-	int n;
-
-	if (get_user(n, &uarg->count) || put_user(n, &p->count) ||
-	    get_user(addr, &uarg->list) || put_user(compat_ptr(addr), &p->list))
-		return -EFAULT;
-
-	return sys_ioctl(fd, DRM_IOCTL_FREE_BUFS, (unsigned long)p);
-}
-
-typedef struct drm32_buf_pub {
-	int		  idx;	       /* Index into master buflist	     */
-	int		  total;       /* Buffer size			     */
-	int		  used;	       /* Amount of buffer in use (for DMA)  */
-	u32		  address;     /* Address of buffer (void *)	     */
-} drm32_buf_pub_t;
-
-typedef struct drm32_buf_map {
-	int	      count;	/* Length of buflist			    */
-	u32	      virtual;	/* Mmaped area in user-virtual (void *)	    */
-	u32 	      list;	/* Buffer information (drm_buf_pub_t *)	    */
-} drm32_buf_map_t;
-#define DRM32_IOCTL_MAP_BUFS   DRM_IOWR(0x19, drm32_buf_map_t)
-
-static int drm32_map_bufs(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	drm32_buf_map_t __user *uarg = (drm32_buf_map_t __user *)arg;
-	drm32_buf_pub_t __user *ulist;
-	drm_buf_map_t __user *arg64;
-	drm_buf_pub_t __user *list;
-	int orig_count, ret, i;
-	int n;
-	compat_uptr_t addr;
-
-	if (get_user(orig_count, &uarg->count))
-		return -EFAULT;
-
-	arg64 = compat_alloc_user_space(sizeof(drm_buf_map_t) +
-				(size_t)orig_count * sizeof(drm_buf_pub_t));
-	list = (void __user *)(arg64 + 1);
-
-	if (put_user(orig_count, &arg64->count) ||
-	    put_user(list, &arg64->list) ||
-	    get_user(addr, &uarg->virtual) ||
-	    put_user(compat_ptr(addr), &arg64->virtual) ||
-	    get_user(addr, &uarg->list))
-		return -EFAULT;
-
-	ulist = compat_ptr(addr);
-
-	for (i = 0; i < orig_count; i++) {
-		if (get_user(n, &ulist[i].idx) ||
-		    put_user(n, &list[i].idx) ||
-		    get_user(n, &ulist[i].total) ||
-		    put_user(n, &list[i].total) ||
-		    get_user(n, &ulist[i].used) ||
-		    put_user(n, &list[i].used) ||
-		    get_user(addr, &ulist[i].address) ||
-		    put_user(compat_ptr(addr), &list[i].address))
-			return -EFAULT;
-	}
-
-	ret = sys_ioctl(fd, DRM_IOCTL_MAP_BUFS, (unsigned long) arg64);
-	if (ret)
-		return ret;
-
-	for (i = 0; i < orig_count; i++) {
-		void __user *p;
-		if (get_user(n, &list[i].idx) ||
-		    put_user(n, &ulist[i].idx) ||
-		    get_user(n, &list[i].total) ||
-		    put_user(n, &ulist[i].total) ||
-		    get_user(n, &list[i].used) ||
-		    put_user(n, &ulist[i].used) ||
-		    get_user(p, &list[i].address) ||
-		    put_user((unsigned long)p, &ulist[i].address))
-			return -EFAULT;
-	}
-
-	if (get_user(n, &arg64->count) || put_user(n, &uarg->count))
-		return -EFAULT;
-
-	return 0;
-}
-
-typedef struct drm32_dma {
-				/* Indices here refer to the offset into
-				   buflist in drm_buf_get_t.  */
-	int		context;	  /* Context handle		    */
-	int		send_count;	  /* Number of buffers to send	    */
-	u32		send_indices;	  /* List of handles to buffers (int *) */
-	u32		send_sizes;	  /* Lengths of data to send (int *) */
-	drm_dma_flags_t flags;		  /* Flags			    */
-	int		request_count;	  /* Number of buffers requested    */
-	int		request_size;	  /* Desired size for buffers	    */
-	u32		request_indices;  /* Buffer information (int *)	    */
-	u32		request_sizes;    /* (int *) */
-	int		granted_count;	  /* Number of buffers granted	    */
-} drm32_dma_t;
-#define DRM32_IOCTL_DMA	     DRM_IOWR(0x29, drm32_dma_t)
-
-/* RED PEN	The DRM layer blindly dereferences the send/request
- * 		index/size arrays even though they are userland
- * 		pointers.  -DaveM
- */
-static int drm32_dma(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	drm32_dma_t __user *uarg = (drm32_dma_t __user *) arg;
-	drm_dma_t __user *p = compat_alloc_user_space(sizeof(*p));
-	compat_uptr_t addr;
-	int ret;
-
-	if (copy_in_user(p, uarg, 2 * sizeof(int)) ||
-	    get_user(addr, &uarg->send_indices) ||
-	    put_user(compat_ptr(addr), &p->send_indices) ||
-	    get_user(addr, &uarg->send_sizes) ||
-	    put_user(compat_ptr(addr), &p->send_sizes) ||
-	    copy_in_user(&p->flags, &uarg->flags, sizeof(drm_dma_flags_t)) ||
-	    copy_in_user(&p->request_count, &uarg->request_count, sizeof(int))||
-	    copy_in_user(&p->request_size, &uarg->request_size, sizeof(int)) ||
-	    get_user(addr, &uarg->request_indices) ||
-	    put_user(compat_ptr(addr), &p->request_indices) ||
-	    get_user(addr, &uarg->request_sizes) ||
-	    put_user(compat_ptr(addr), &p->request_sizes) ||
-	    copy_in_user(&p->granted_count, &uarg->granted_count, sizeof(int)))
-		return -EFAULT;
-
-	ret = sys_ioctl(fd, DRM_IOCTL_DMA, (unsigned long)p);
-	if (ret)
-		return ret;
-
-	if (copy_in_user(uarg, p, 2 * sizeof(int)) ||
-	    copy_in_user(&uarg->flags, &p->flags, sizeof(drm_dma_flags_t)) ||
-	    copy_in_user(&uarg->request_count, &p->request_count, sizeof(int))||
-	    copy_in_user(&uarg->request_size, &p->request_size, sizeof(int)) ||
-	    copy_in_user(&uarg->granted_count, &p->granted_count, sizeof(int)))
-		return -EFAULT;
-
-	return 0;
-}
-
-typedef struct drm32_ctx_res {
-	int		count;
-	u32		contexts; /* (drm_ctx_t *) */
-} drm32_ctx_res_t;
-#define DRM32_IOCTL_RES_CTX    DRM_IOWR(0x26, drm32_ctx_res_t)
-
-static int drm32_res_ctx(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	drm32_ctx_res_t __user *uarg = (drm32_ctx_res_t __user *) arg;
-	drm_ctx_res_t __user *p = compat_alloc_user_space(sizeof(*p));
-	compat_uptr_t addr;
-	int ret;
-
-	if (copy_in_user(p, uarg, sizeof(int)) ||
-	    get_user(addr, &uarg->contexts) ||
-	    put_user(compat_ptr(addr), &p->contexts))
-		return -EFAULT;
-
-	ret = sys_ioctl(fd, DRM_IOCTL_RES_CTX, (unsigned long)p);
-	if (ret)
-		return ret;
-
-	if (copy_in_user(uarg, p, sizeof(int)))
-		return -EFAULT;
-
-	return 0;
-}
-
-#endif
-
-typedef int (* ioctl32_handler_t)(unsigned int, unsigned int, unsigned long, struct file *);
-
 #define COMPATIBLE_IOCTL(cmd)		HANDLE_IOCTL((cmd),sys_ioctl)
-#define HANDLE_IOCTL(cmd,handler)	{ (cmd), (ioctl32_handler_t)(handler), NULL },
+#define HANDLE_IOCTL(cmd,handler)	{ (cmd), (ioctl_trans_handler_t)(handler), NULL },
 #define IOCTL_TABLE_START \
 	struct ioctl_trans ioctl_start[] = {
 #define IOCTL_TABLE_END \
@@ -475,116 +27,6 @@ IOCTL_TABLE_START
 #include <linux/compat_ioctl.h>
 #define DECLARES
 #include "compat_ioctl.c"
-COMPATIBLE_IOCTL(TIOCSTART)
-COMPATIBLE_IOCTL(TIOCSTOP)
-COMPATIBLE_IOCTL(TIOCSLTC)
-COMPATIBLE_IOCTL(FBIOGTYPE)
-COMPATIBLE_IOCTL(FBIOSATTR)
-COMPATIBLE_IOCTL(FBIOGATTR)
-COMPATIBLE_IOCTL(FBIOSVIDEO)
-COMPATIBLE_IOCTL(FBIOGVIDEO)
-COMPATIBLE_IOCTL(FBIOGCURSOR32)  /* This is not implemented yet. Later it should be converted... */
-COMPATIBLE_IOCTL(FBIOSCURPOS)
-COMPATIBLE_IOCTL(FBIOGCURPOS)
-COMPATIBLE_IOCTL(FBIOGCURMAX)
-/* Little k */
-COMPATIBLE_IOCTL(KIOCTYPE)
-COMPATIBLE_IOCTL(KIOCLAYOUT)
-COMPATIBLE_IOCTL(KIOCGTRANS)
-COMPATIBLE_IOCTL(KIOCTRANS)
-COMPATIBLE_IOCTL(KIOCCMD)
-COMPATIBLE_IOCTL(KIOCSDIRECT)
-COMPATIBLE_IOCTL(KIOCSLED)
-COMPATIBLE_IOCTL(KIOCGLED)
-COMPATIBLE_IOCTL(KIOCSRATE)
-COMPATIBLE_IOCTL(KIOCGRATE)
-COMPATIBLE_IOCTL(VUIDSFORMAT)
-COMPATIBLE_IOCTL(VUIDGFORMAT)
-/* Little v, the video4linux ioctls */
-COMPATIBLE_IOCTL(_IOR('p', 20, int[7])) /* RTCGET */
-COMPATIBLE_IOCTL(_IOW('p', 21, int[7])) /* RTCSET */
-COMPATIBLE_IOCTL(ENVCTRL_RD_WARNING_TEMPERATURE)
-COMPATIBLE_IOCTL(ENVCTRL_RD_SHUTDOWN_TEMPERATURE)
-COMPATIBLE_IOCTL(ENVCTRL_RD_CPU_TEMPERATURE)
-COMPATIBLE_IOCTL(ENVCTRL_RD_FAN_STATUS)
-COMPATIBLE_IOCTL(ENVCTRL_RD_VOLTAGE_STATUS)
-COMPATIBLE_IOCTL(ENVCTRL_RD_SCSI_TEMPERATURE)
-COMPATIBLE_IOCTL(ENVCTRL_RD_ETHERNET_TEMPERATURE)
-COMPATIBLE_IOCTL(ENVCTRL_RD_MTHRBD_TEMPERATURE)
-COMPATIBLE_IOCTL(ENVCTRL_RD_CPU_VOLTAGE)
-COMPATIBLE_IOCTL(ENVCTRL_RD_GLOBALADDRESS)
-/* COMPATIBLE_IOCTL(D7SIOCRD) same value as ENVCTRL_RD_VOLTAGE_STATUS */
-COMPATIBLE_IOCTL(D7SIOCWR)
-COMPATIBLE_IOCTL(D7SIOCTM)
-/* OPENPROMIO, SunOS/Solaris only, the NetBSD one's have
- * embedded pointers in the arg which we'd need to clean up...
- */
-COMPATIBLE_IOCTL(OPROMGETOPT)
-COMPATIBLE_IOCTL(OPROMSETOPT)
-COMPATIBLE_IOCTL(OPROMNXTOPT)
-COMPATIBLE_IOCTL(OPROMSETOPT2)
-COMPATIBLE_IOCTL(OPROMNEXT)
-COMPATIBLE_IOCTL(OPROMCHILD)
-COMPATIBLE_IOCTL(OPROMGETPROP)
-COMPATIBLE_IOCTL(OPROMNXTPROP)
-COMPATIBLE_IOCTL(OPROMU2P)
-COMPATIBLE_IOCTL(OPROMGETCONS)
-COMPATIBLE_IOCTL(OPROMGETFBNAME)
-COMPATIBLE_IOCTL(OPROMGETBOOTARGS)
-COMPATIBLE_IOCTL(OPROMSETCUR)
-COMPATIBLE_IOCTL(OPROMPCI2NODE)
-COMPATIBLE_IOCTL(OPROMPATH2NODE)
-/* Big L */
-COMPATIBLE_IOCTL(LOOP_SET_STATUS64)
-COMPATIBLE_IOCTL(LOOP_GET_STATUS64)
-/* Big A */
-COMPATIBLE_IOCTL(AUDIO_GETINFO)
-COMPATIBLE_IOCTL(AUDIO_SETINFO)
-COMPATIBLE_IOCTL(AUDIO_DRAIN)
-COMPATIBLE_IOCTL(AUDIO_GETDEV)
-COMPATIBLE_IOCTL(AUDIO_GETDEV_SUNOS)
-COMPATIBLE_IOCTL(AUDIO_FLUSH)
-COMPATIBLE_IOCTL(AUTOFS_IOC_EXPIRE_MULTI)
-#if defined(CONFIG_DRM) || defined(CONFIG_DRM_MODULE)
-COMPATIBLE_IOCTL(DRM_IOCTL_GET_MAGIC)
-COMPATIBLE_IOCTL(DRM_IOCTL_IRQ_BUSID)
-COMPATIBLE_IOCTL(DRM_IOCTL_AUTH_MAGIC)
-COMPATIBLE_IOCTL(DRM_IOCTL_BLOCK)
-COMPATIBLE_IOCTL(DRM_IOCTL_UNBLOCK)
-COMPATIBLE_IOCTL(DRM_IOCTL_CONTROL)
-COMPATIBLE_IOCTL(DRM_IOCTL_ADD_BUFS)
-COMPATIBLE_IOCTL(DRM_IOCTL_MARK_BUFS)
-COMPATIBLE_IOCTL(DRM_IOCTL_ADD_CTX)
-COMPATIBLE_IOCTL(DRM_IOCTL_RM_CTX)
-COMPATIBLE_IOCTL(DRM_IOCTL_MOD_CTX)
-COMPATIBLE_IOCTL(DRM_IOCTL_GET_CTX)
-COMPATIBLE_IOCTL(DRM_IOCTL_SWITCH_CTX)
-COMPATIBLE_IOCTL(DRM_IOCTL_NEW_CTX)
-COMPATIBLE_IOCTL(DRM_IOCTL_ADD_DRAW)
-COMPATIBLE_IOCTL(DRM_IOCTL_RM_DRAW)
-COMPATIBLE_IOCTL(DRM_IOCTL_LOCK)
-COMPATIBLE_IOCTL(DRM_IOCTL_UNLOCK)
-COMPATIBLE_IOCTL(DRM_IOCTL_FINISH)
-#endif /* DRM */
-COMPATIBLE_IOCTL(WIOCSTART)
-COMPATIBLE_IOCTL(WIOCSTOP)
-COMPATIBLE_IOCTL(WIOCGSTAT)
-/* And these ioctls need translation */
-/* Note SIOCRTMSG is no longer, so this is safe and * the user would have seen just an -EINVAL anyways. */
-HANDLE_IOCTL(FBIOPUTCMAP32, fbiogetputcmap)
-HANDLE_IOCTL(FBIOGETCMAP32, fbiogetputcmap)
-HANDLE_IOCTL(FBIOSCURSOR32, fbiogscursor)
-#if defined(CONFIG_DRM) || defined(CONFIG_DRM_MODULE)
-HANDLE_IOCTL(DRM32_IOCTL_VERSION, drm32_version)
-HANDLE_IOCTL(DRM32_IOCTL_GET_UNIQUE, drm32_getsetunique)
-HANDLE_IOCTL(DRM32_IOCTL_SET_UNIQUE, drm32_getsetunique)
-HANDLE_IOCTL(DRM32_IOCTL_ADD_MAP, drm32_addmap)
-HANDLE_IOCTL(DRM32_IOCTL_INFO_BUFS, drm32_info_bufs)
-HANDLE_IOCTL(DRM32_IOCTL_FREE_BUFS, drm32_free_bufs)
-HANDLE_IOCTL(DRM32_IOCTL_MAP_BUFS, drm32_map_bufs)
-HANDLE_IOCTL(DRM32_IOCTL_DMA, drm32_dma)
-HANDLE_IOCTL(DRM32_IOCTL_RES_CTX, drm32_res_ctx)
-#endif /* DRM */
 #if 0
 HANDLE_IOCTL(RTC32_IRQP_READ, do_rtc_ioctl)
 HANDLE_IOCTL(RTC32_IRQP_SET, do_rtc_ioctl)
diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c
index c9b69167632a..233526ba3abe 100644
--- a/arch/sparc64/kernel/irq.c
+++ b/arch/sparc64/kernel/irq.c
@@ -27,6 +27,7 @@
 #include <asm/atomic.h>
 #include <asm/system.h>
 #include <asm/irq.h>
+#include <asm/io.h>
 #include <asm/sbus.h>
 #include <asm/iommu.h>
 #include <asm/upa.h>
diff --git a/arch/sparc64/kernel/itlb_base.S b/arch/sparc64/kernel/itlb_base.S
index b5e32dfa4fbc..4951ff8f6877 100644
--- a/arch/sparc64/kernel/itlb_base.S
+++ b/arch/sparc64/kernel/itlb_base.S
@@ -15,14 +15,12 @@
  */
 #define CREATE_VPTE_OFFSET1(r1, r2) \
 				srax	r1, 10, r2
-#define CREATE_VPTE_OFFSET2(r1, r2)
-#define CREATE_VPTE_NOP		nop
+#define CREATE_VPTE_OFFSET2(r1, r2) nop
 #else /* PAGE_SHIFT */
 #define CREATE_VPTE_OFFSET1(r1, r2) \
 				srax	r1, PAGE_SHIFT, r2
 #define CREATE_VPTE_OFFSET2(r1, r2) \
 				sllx	r2, 3, r2
-#define CREATE_VPTE_NOP
 #endif /* PAGE_SHIFT */
 
 
@@ -36,6 +34,7 @@
  */
 
 /* ITLB ** ICACHE line 1: Quick user TLB misses		*/
+	mov		TLB_SFSR, %g1
 	ldxa		[%g1 + %g1] ASI_IMMU, %g4	! Get TAG_ACCESS
 	CREATE_VPTE_OFFSET1(%g4, %g6)			! Create VPTE offset
 	CREATE_VPTE_OFFSET2(%g4, %g6)			! Create VPTE offset
@@ -43,41 +42,38 @@
 1:	brgez,pn	%g5, 3f				! Not valid, branch out
 	 sethi		%hi(_PAGE_EXEC), %g4		! Delay-slot
 	andcc		%g5, %g4, %g0			! Executable?
+
+/* ITLB ** ICACHE line 2: Real faults			*/
 	be,pn		%xcc, 3f			! Nope, branch.
 	 nop						! Delay-slot
 2:	stxa		%g5, [%g0] ASI_ITLB_DATA_IN	! Load PTE into TLB
 	retry						! Trap return
-3:	rdpr		%pstate, %g4			! Move into alternate globals
-
-/* ITLB ** ICACHE line 2: Real faults			*/
+3:	rdpr		%pstate, %g4			! Move into alt-globals
 	wrpr		%g4, PSTATE_AG|PSTATE_MG, %pstate
 	rdpr		%tpc, %g5			! And load faulting VA
 	mov		FAULT_CODE_ITLB, %g4		! It was read from ITLB
-sparc64_realfault_common:				! Called by TL0 dtlb_miss too
+
+/* ITLB ** ICACHE line 3: Finish faults	*/
+sparc64_realfault_common:				! Called by dtlb_miss
 	stb		%g4, [%g6 + TI_FAULT_CODE]
 	stx		%g5, [%g6 + TI_FAULT_ADDR]
 	ba,pt		%xcc, etrap			! Save state
 1:	 rd		%pc, %g7			! ...
-	nop
-
-/* ITLB ** ICACHE line 3: Finish faults + window fixups	*/
 	call		do_sparc64_fault		! Call fault handler
 	 add		%sp, PTREGS_OFF, %o0! Compute pt_regs arg
 	ba,pt		%xcc, rtrap_clr_l6		! Restore cpu state
 	 nop
+
+/* ITLB ** ICACHE line 4: Window fixups */
 winfix_trampoline:
 	rdpr		%tpc, %g3			! Prepare winfixup TNPC
-	or		%g3, 0x7c, %g3			! Compute offset to branch
+	or		%g3, 0x7c, %g3			! Compute branch offset
 	wrpr		%g3, %tnpc			! Write it into TNPC
 	done						! Do it to it
-
-/* ITLB ** ICACHE line 4: Unused...	*/
 	nop
 	nop
 	nop
 	nop
-	CREATE_VPTE_NOP
 
 #undef CREATE_VPTE_OFFSET1
 #undef CREATE_VPTE_OFFSET2
-#undef CREATE_VPTE_NOP
diff --git a/arch/sparc64/kernel/kprobes.c b/arch/sparc64/kernel/kprobes.c
index 0d66d07c8c6e..96bd09b098f4 100644
--- a/arch/sparc64/kernel/kprobes.c
+++ b/arch/sparc64/kernel/kprobes.c
@@ -38,6 +38,9 @@
  * - Mark that we are no longer actively in a kprobe.
  */
 
+DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
+DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
+
 int __kprobes arch_prepare_kprobe(struct kprobe *p)
 {
 	return 0;
@@ -66,46 +69,39 @@ void __kprobes arch_remove_kprobe(struct kprobe *p)
 {
 }
 
-static struct kprobe *current_kprobe;
-static unsigned long current_kprobe_orig_tnpc;
-static unsigned long current_kprobe_orig_tstate_pil;
-static unsigned int kprobe_status;
-static struct kprobe *kprobe_prev;
-static unsigned long kprobe_orig_tnpc_prev;
-static unsigned long kprobe_orig_tstate_pil_prev;
-static unsigned int kprobe_status_prev;
-
-static inline void save_previous_kprobe(void)
+static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb)
 {
-	kprobe_status_prev = kprobe_status;
-	kprobe_orig_tnpc_prev = current_kprobe_orig_tnpc;
-	kprobe_orig_tstate_pil_prev = current_kprobe_orig_tstate_pil;
-	kprobe_prev = current_kprobe;
+	kcb->prev_kprobe.kp = kprobe_running();
+	kcb->prev_kprobe.status = kcb->kprobe_status;
+	kcb->prev_kprobe.orig_tnpc = kcb->kprobe_orig_tnpc;
+	kcb->prev_kprobe.orig_tstate_pil = kcb->kprobe_orig_tstate_pil;
 }
 
-static inline void restore_previous_kprobe(void)
+static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb)
 {
-	kprobe_status = kprobe_status_prev;
-	current_kprobe_orig_tnpc = kprobe_orig_tnpc_prev;
-	current_kprobe_orig_tstate_pil = kprobe_orig_tstate_pil_prev;
-	current_kprobe = kprobe_prev;
+	__get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp;
+	kcb->kprobe_status = kcb->prev_kprobe.status;
+	kcb->kprobe_orig_tnpc = kcb->prev_kprobe.orig_tnpc;
+	kcb->kprobe_orig_tstate_pil = kcb->prev_kprobe.orig_tstate_pil;
 }
 
-static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs)
+static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
+				struct kprobe_ctlblk *kcb)
 {
-	current_kprobe_orig_tnpc = regs->tnpc;
-	current_kprobe_orig_tstate_pil = (regs->tstate & TSTATE_PIL);
-	current_kprobe = p;
+	__get_cpu_var(current_kprobe) = p;
+	kcb->kprobe_orig_tnpc = regs->tnpc;
+	kcb->kprobe_orig_tstate_pil = (regs->tstate & TSTATE_PIL);
 }
 
-static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
+static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs,
+			struct kprobe_ctlblk *kcb)
 {
 	regs->tstate |= TSTATE_PIL;
 
 	/*single step inline, if it a breakpoint instruction*/
 	if (p->opcode == BREAKPOINT_INSTRUCTION) {
 		regs->tpc = (unsigned long) p->addr;
-		regs->tnpc = current_kprobe_orig_tnpc;
+		regs->tnpc = kcb->kprobe_orig_tnpc;
 	} else {
 		regs->tpc = (unsigned long) &p->ainsn.insn[0];
 		regs->tnpc = (unsigned long) &p->ainsn.insn[1];
@@ -117,19 +113,21 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 	struct kprobe *p;
 	void *addr = (void *) regs->tpc;
 	int ret = 0;
+	struct kprobe_ctlblk *kcb;
 
+	/*
+	 * We don't want to be preempted for the entire
+	 * duration of kprobe processing
+	 */
 	preempt_disable();
+	kcb = get_kprobe_ctlblk();
 
 	if (kprobe_running()) {
-		/* We *are* holding lock here, so this is safe.
-		 * Disarm the probe we just hit, and ignore it.
-		 */
 		p = get_kprobe(addr);
 		if (p) {
-			if (kprobe_status == KPROBE_HIT_SS) {
+			if (kcb->kprobe_status == KPROBE_HIT_SS) {
 				regs->tstate = ((regs->tstate & ~TSTATE_PIL) |
-					current_kprobe_orig_tstate_pil);
-				unlock_kprobes();
+					kcb->kprobe_orig_tstate_pil);
 				goto no_kprobe;
 			}
 			/* We have reentered the kprobe_handler(), since
@@ -138,25 +136,22 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 			 * just single step on the instruction of the new probe
 			 * without calling any user handlers.
 			 */
-			save_previous_kprobe();
-			set_current_kprobe(p, regs);
+			save_previous_kprobe(kcb);
+			set_current_kprobe(p, regs, kcb);
 			p->nmissed++;
-			kprobe_status = KPROBE_REENTER;
-			prepare_singlestep(p, regs);
+			kcb->kprobe_status = KPROBE_REENTER;
+			prepare_singlestep(p, regs, kcb);
 			return 1;
 		} else {
-			p = current_kprobe;
+			p = __get_cpu_var(current_kprobe);
 			if (p->break_handler && p->break_handler(p, regs))
 				goto ss_probe;
 		}
-		/* If it's not ours, can't be delete race, (we hold lock). */
 		goto no_kprobe;
 	}
 
-	lock_kprobes();
 	p = get_kprobe(addr);
 	if (!p) {
-		unlock_kprobes();
 		if (*(u32 *)addr != BREAKPOINT_INSTRUCTION) {
 			/*
 			 * The breakpoint instruction was removed right
@@ -171,14 +166,14 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 		goto no_kprobe;
 	}
 
-	set_current_kprobe(p, regs);
-	kprobe_status = KPROBE_HIT_ACTIVE;
+	set_current_kprobe(p, regs, kcb);
+	kcb->kprobe_status = KPROBE_HIT_ACTIVE;
 	if (p->pre_handler && p->pre_handler(p, regs))
 		return 1;
 
 ss_probe:
-	prepare_singlestep(p, regs);
-	kprobe_status = KPROBE_HIT_SS;
+	prepare_singlestep(p, regs, kcb);
+	kcb->kprobe_status = KPROBE_HIT_SS;
 	return 1;
 
 no_kprobe:
@@ -260,11 +255,12 @@ static void __kprobes retpc_fixup(struct pt_regs *regs, u32 insn,
  * This function prepares to return from the post-single-step
  * breakpoint trap.
  */
-static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs)
+static void __kprobes resume_execution(struct kprobe *p,
+		struct pt_regs *regs, struct kprobe_ctlblk *kcb)
 {
 	u32 insn = p->ainsn.insn[0];
 
-	regs->tpc = current_kprobe_orig_tnpc;
+	regs->tpc = kcb->kprobe_orig_tnpc;
 	regs->tnpc = relbranch_fixup(insn,
 				     (unsigned long) p->addr,
 				     (unsigned long) &p->ainsn.insn[0],
@@ -272,44 +268,48 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs)
 	retpc_fixup(regs, insn, (unsigned long) p->addr);
 
 	regs->tstate = ((regs->tstate & ~TSTATE_PIL) |
-			current_kprobe_orig_tstate_pil);
+			kcb->kprobe_orig_tstate_pil);
 }
 
 static inline int post_kprobe_handler(struct pt_regs *regs)
 {
-	if (!kprobe_running())
+	struct kprobe *cur = kprobe_running();
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	if (!cur)
 		return 0;
 
-	if ((kprobe_status != KPROBE_REENTER) && current_kprobe->post_handler) {
-		kprobe_status = KPROBE_HIT_SSDONE;
-		current_kprobe->post_handler(current_kprobe, regs, 0);
+	if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) {
+		kcb->kprobe_status = KPROBE_HIT_SSDONE;
+		cur->post_handler(cur, regs, 0);
 	}
 
-	resume_execution(current_kprobe, regs);
+	resume_execution(cur, regs, kcb);
 
 	/*Restore back the original saved kprobes variables and continue. */
-	if (kprobe_status == KPROBE_REENTER) {
-		restore_previous_kprobe();
+	if (kcb->kprobe_status == KPROBE_REENTER) {
+		restore_previous_kprobe(kcb);
 		goto out;
 	}
-	unlock_kprobes();
+	reset_current_kprobe();
 out:
 	preempt_enable_no_resched();
 
 	return 1;
 }
 
-/* Interrupts disabled, kprobe_lock held. */
 static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr)
 {
-	if (current_kprobe->fault_handler
-	    && current_kprobe->fault_handler(current_kprobe, regs, trapnr))
+	struct kprobe *cur = kprobe_running();
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr))
 		return 1;
 
-	if (kprobe_status & KPROBE_HIT_SS) {
-		resume_execution(current_kprobe, regs);
+	if (kcb->kprobe_status & KPROBE_HIT_SS) {
+		resume_execution(cur, regs, kcb);
 
-		unlock_kprobes();
+		reset_current_kprobe();
 		preempt_enable_no_resched();
 	}
 	return 0;
@@ -322,29 +322,30 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
 				       unsigned long val, void *data)
 {
 	struct die_args *args = (struct die_args *)data;
+	int ret = NOTIFY_DONE;
+
 	switch (val) {
 	case DIE_DEBUG:
 		if (kprobe_handler(args->regs))
-			return NOTIFY_STOP;
+			ret = NOTIFY_STOP;
 		break;
 	case DIE_DEBUG_2:
 		if (post_kprobe_handler(args->regs))
-			return NOTIFY_STOP;
+			ret = NOTIFY_STOP;
 		break;
 	case DIE_GPF:
-		if (kprobe_running() &&
-		    kprobe_fault_handler(args->regs, args->trapnr))
-			return NOTIFY_STOP;
-		break;
 	case DIE_PAGE_FAULT:
+		/* kprobe_running() needs smp_processor_id() */
+		preempt_disable();
 		if (kprobe_running() &&
 		    kprobe_fault_handler(args->regs, args->trapnr))
-			return NOTIFY_STOP;
+			ret = NOTIFY_STOP;
+		preempt_enable();
 		break;
 	default:
 		break;
 	}
-	return NOTIFY_DONE;
+	return ret;
 }
 
 asmlinkage void __kprobes kprobe_trap(unsigned long trap_level,
@@ -368,24 +369,21 @@ asmlinkage void __kprobes kprobe_trap(unsigned long trap_level,
 }
 
 /* Jprobes support.  */
-static struct pt_regs jprobe_saved_regs;
-static struct pt_regs *jprobe_saved_regs_location;
-static struct sparc_stackf jprobe_saved_stack;
-
 int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
 {
 	struct jprobe *jp = container_of(p, struct jprobe, kp);
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
 
-	jprobe_saved_regs_location = regs;
-	memcpy(&jprobe_saved_regs, regs, sizeof(*regs));
+	kcb->jprobe_saved_regs_location = regs;
+	memcpy(&(kcb->jprobe_saved_regs), regs, sizeof(*regs));
 
 	/* Save a whole stack frame, this gets arguments
 	 * pushed onto the stack after using up all the
 	 * arg registers.
 	 */
-	memcpy(&jprobe_saved_stack,
+	memcpy(&(kcb->jprobe_saved_stack),
 	       (char *) (regs->u_regs[UREG_FP] + STACK_BIAS),
-	       sizeof(jprobe_saved_stack));
+	       sizeof(kcb->jprobe_saved_stack));
 
 	regs->tpc  = (unsigned long) jp->entry;
 	regs->tnpc = ((unsigned long) jp->entry) + 0x4UL;
@@ -396,7 +394,6 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
 
 void __kprobes jprobe_return(void)
 {
-	preempt_enable_no_resched();
 	__asm__ __volatile__(
 		".globl	jprobe_return_trap_instruction\n"
 "jprobe_return_trap_instruction:\n\t"
@@ -410,14 +407,15 @@ extern void __show_regs(struct pt_regs * regs);
 int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
 {
 	u32 *addr = (u32 *) regs->tpc;
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
 
 	if (addr == (u32 *) jprobe_return_trap_instruction) {
-		if (jprobe_saved_regs_location != regs) {
+		if (kcb->jprobe_saved_regs_location != regs) {
 			printk("JPROBE: Current regs (%p) does not match "
 			       "saved regs (%p).\n",
-			       regs, jprobe_saved_regs_location);
+			       regs, kcb->jprobe_saved_regs_location);
 			printk("JPROBE: Saved registers\n");
-			__show_regs(jprobe_saved_regs_location);
+			__show_regs(kcb->jprobe_saved_regs_location);
 			printk("JPROBE: Current registers\n");
 			__show_regs(regs);
 			BUG();
@@ -426,12 +424,13 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
 		 * first so that UREG_FP is the original one for
 		 * the stack frame restore.
 		 */
-		memcpy(regs, &jprobe_saved_regs, sizeof(*regs));
+		memcpy(regs, &(kcb->jprobe_saved_regs), sizeof(*regs));
 
 		memcpy((char *) (regs->u_regs[UREG_FP] + STACK_BIAS),
-		       &jprobe_saved_stack,
-		       sizeof(jprobe_saved_stack));
+		       &(kcb->jprobe_saved_stack),
+		       sizeof(kcb->jprobe_saved_stack));
 
+		preempt_enable_no_resched();
 		return 1;
 	}
 	return 0;
diff --git a/arch/sparc64/kernel/ktlb.S b/arch/sparc64/kernel/ktlb.S
new file mode 100644
index 000000000000..d9244d3c9f73
--- /dev/null
+++ b/arch/sparc64/kernel/ktlb.S
@@ -0,0 +1,194 @@
+/* arch/sparc64/kernel/ktlb.S: Kernel mapping TLB miss handling.
+ *
+ * Copyright (C) 1995, 1997, 2005 David S. Miller <davem@davemloft.net>
+ * Copyright (C) 1996 Eddie C. Dost        (ecd@brainaid.de)
+ * Copyright (C) 1996 Miguel de Icaza      (miguel@nuclecu.unam.mx)
+ * Copyright (C) 1996,98,99 Jakub Jelinek  (jj@sunsite.mff.cuni.cz)
+*/
+
+#include <linux/config.h>
+#include <asm/head.h>
+#include <asm/asi.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+	.text
+	.align		32
+
+/*
+ * On a second level vpte miss, check whether the original fault is to the OBP 
+ * range (note that this is only possible for instruction miss, data misses to
+ * obp range do not use vpte). If so, go back directly to the faulting address.
+ * This is because we want to read the tpc, otherwise we have no way of knowing
+ * the 8k aligned faulting address if we are using >8k kernel pagesize. This
+ * also ensures no vpte range addresses are dropped into tlb while obp is
+ * executing (see inherit_locked_prom_mappings() rant).
+ */
+sparc64_vpte_nucleus:
+	/* Note that kvmap below has verified that the address is
+	 * in the range MODULES_VADDR --> VMALLOC_END already.  So
+	 * here we need only check if it is an OBP address or not.
+	 */
+	sethi		%hi(LOW_OBP_ADDRESS), %g5
+	cmp		%g4, %g5
+	blu,pn		%xcc, kern_vpte
+	 mov		0x1, %g5
+	sllx		%g5, 32, %g5
+	cmp		%g4, %g5
+	blu,pn		%xcc, vpte_insn_obp
+	 nop
+
+	/* These two instructions are patched by paginig_init().  */
+kern_vpte:
+	sethi		%hi(swapper_pgd_zero), %g5
+	lduw		[%g5 + %lo(swapper_pgd_zero)], %g5
+
+	/* With kernel PGD in %g5, branch back into dtlb_backend.  */
+	ba,pt		%xcc, sparc64_kpte_continue
+	 andn		%g1, 0x3, %g1	/* Finish PMD offset adjustment.  */
+
+vpte_noent:
+	/* Restore previous TAG_ACCESS, %g5 is zero, and we will
+	 * skip over the trap instruction so that the top level
+	 * TLB miss handler will thing this %g5 value is just an
+	 * invalid PTE, thus branching to full fault processing.
+	 */
+	mov		TLB_SFSR, %g1
+	stxa		%g4, [%g1 + %g1] ASI_DMMU
+	done
+
+vpte_insn_obp:
+	/* Behave as if we are at TL0.  */
+	wrpr		%g0, 1, %tl
+	rdpr		%tpc, %g4	/* Find original faulting iaddr */
+	srlx		%g4, 13, %g4	/* Throw out context bits */
+	sllx		%g4, 13, %g4	/* g4 has vpn + ctx0 now */
+
+	/* Restore previous TAG_ACCESS.  */
+	mov		TLB_SFSR, %g1
+	stxa		%g4, [%g1 + %g1] ASI_IMMU
+
+	sethi		%hi(prom_trans), %g5
+	or		%g5, %lo(prom_trans), %g5
+
+1:	ldx		[%g5 + 0x00], %g6	! base
+	brz,a,pn	%g6, longpath		! no more entries, fail
+	 mov		TLB_SFSR, %g1		! and restore %g1
+	ldx		[%g5 + 0x08], %g1	! len
+	add		%g6, %g1, %g1		! end
+	cmp		%g6, %g4
+	bgu,pt		%xcc, 2f
+	 cmp		%g4, %g1
+	bgeu,pt		%xcc, 2f
+	 ldx		[%g5 + 0x10], %g1	! PTE
+
+	/* TLB load, restore %g1, and return from trap.  */
+	sub		%g4, %g6, %g6
+	add		%g1, %g6, %g5
+	mov		TLB_SFSR, %g1
+	stxa		%g5, [%g0] ASI_ITLB_DATA_IN
+	retry
+
+2:	ba,pt		%xcc, 1b
+	 add		%g5, (3 * 8), %g5	! next entry
+
+kvmap_do_obp:
+	sethi		%hi(prom_trans), %g5
+	or		%g5, %lo(prom_trans), %g5
+	srlx		%g4, 13, %g4
+	sllx		%g4, 13, %g4
+
+1:	ldx		[%g5 + 0x00], %g6	! base
+	brz,a,pn	%g6, longpath		! no more entries, fail
+	 mov		TLB_SFSR, %g1		! and restore %g1
+	ldx		[%g5 + 0x08], %g1	! len
+	add		%g6, %g1, %g1		! end
+	cmp		%g6, %g4
+	bgu,pt		%xcc, 2f
+	 cmp		%g4, %g1
+	bgeu,pt		%xcc, 2f
+	 ldx		[%g5 + 0x10], %g1	! PTE
+
+	/* TLB load, restore %g1, and return from trap.  */
+	sub		%g4, %g6, %g6
+	add		%g1, %g6, %g5
+	mov		TLB_SFSR, %g1
+	stxa		%g5, [%g0] ASI_DTLB_DATA_IN
+	retry
+
+2:	ba,pt		%xcc, 1b
+	 add		%g5, (3 * 8), %g5	! next entry
+
+/*
+ * On a first level data miss, check whether this is to the OBP range (note
+ * that such accesses can be made by prom, as well as by kernel using
+ * prom_getproperty on "address"), and if so, do not use vpte access ...
+ * rather, use information saved during inherit_prom_mappings() using 8k
+ * pagesize.
+ */
+	.align		32
+kvmap:
+	brgez,pn	%g4, kvmap_nonlinear
+	 nop
+
+#ifdef CONFIG_DEBUG_PAGEALLOC
+	.globl		kvmap_linear_patch
+kvmap_linear_patch:
+#endif
+	ba,pt		%xcc, kvmap_load
+	 xor		%g2, %g4, %g5
+
+#ifdef CONFIG_DEBUG_PAGEALLOC
+	sethi		%hi(swapper_pg_dir), %g5
+	or		%g5, %lo(swapper_pg_dir), %g5
+	sllx		%g4, 64 - (PGDIR_SHIFT + PGDIR_BITS), %g6
+	srlx		%g6, 64 - PAGE_SHIFT, %g6
+	andn		%g6, 0x3, %g6
+	lduw		[%g5 + %g6], %g5
+	brz,pn		%g5, longpath
+	 sllx		%g4, 64 - (PMD_SHIFT + PMD_BITS), %g6
+	srlx		%g6, 64 - PAGE_SHIFT, %g6
+	sllx		%g5, 11, %g5
+	andn		%g6, 0x3, %g6
+	lduwa		[%g5 + %g6] ASI_PHYS_USE_EC, %g5
+	brz,pn		%g5, longpath
+	 sllx		%g4, 64 - PMD_SHIFT, %g6
+	srlx		%g6, 64 - PAGE_SHIFT, %g6
+	sllx		%g5, 11, %g5
+	andn		%g6, 0x7, %g6
+	ldxa		[%g5 + %g6] ASI_PHYS_USE_EC, %g5
+	brz,pn		%g5, longpath
+	 nop
+	ba,a,pt		%xcc, kvmap_load
+#endif
+
+kvmap_nonlinear:
+	sethi		%hi(MODULES_VADDR), %g5
+	cmp		%g4, %g5
+	blu,pn		%xcc, longpath
+	 mov		(VMALLOC_END >> 24), %g5
+	sllx		%g5, 24, %g5
+	cmp		%g4, %g5
+	bgeu,pn		%xcc, longpath
+	 nop
+
+kvmap_check_obp:
+	sethi		%hi(LOW_OBP_ADDRESS), %g5
+	cmp		%g4, %g5
+	blu,pn		%xcc, kvmap_vmalloc_addr
+	 mov		0x1, %g5
+	sllx		%g5, 32, %g5
+	cmp		%g4, %g5
+	blu,pn		%xcc, kvmap_do_obp
+	 nop
+
+kvmap_vmalloc_addr:
+	/* If we get here, a vmalloc addr was accessed, load kernel VPTE.  */
+	ldxa		[%g3 + %g6] ASI_N, %g5
+	brgez,pn	%g5, longpath
+	 nop
+
+kvmap_load:
+	/* PTE is valid, load into TLB and return from trap.  */
+	stxa		%g5, [%g0] ASI_DTLB_DATA_IN	! Reload TLB
+	retry
diff --git a/arch/sparc64/kernel/pci_iommu.c b/arch/sparc64/kernel/pci_iommu.c
index 425c60cfea19..a11910be1013 100644
--- a/arch/sparc64/kernel/pci_iommu.c
+++ b/arch/sparc64/kernel/pci_iommu.c
@@ -49,12 +49,6 @@ static void __iommu_flushall(struct pci_iommu *iommu)
 
 	/* Ensure completion of previous PIO writes. */
 	(void) pci_iommu_read(iommu->write_complete_reg);
-
-	/* Now update everyone's flush point. */
-	for (entry = 0; entry < PBM_NCLUSTERS; entry++) {
-		iommu->alloc_info[entry].flush =
-			iommu->alloc_info[entry].next;
-	}
 }
 
 #define IOPTE_CONSISTENT(CTX) \
@@ -80,120 +74,117 @@ static void inline iopte_make_dummy(struct pci_iommu *iommu, iopte_t *iopte)
 	iopte_val(*iopte) = val;
 }
 
-void pci_iommu_table_init(struct pci_iommu *iommu, int tsbsize)
+/* Based largely upon the ppc64 iommu allocator.  */
+static long pci_arena_alloc(struct pci_iommu *iommu, unsigned long npages)
 {
-	int i;
-
-	tsbsize /= sizeof(iopte_t);
-
-	for (i = 0; i < tsbsize; i++)
-		iopte_make_dummy(iommu, &iommu->page_table[i]);
-}
-
-static iopte_t *alloc_streaming_cluster(struct pci_iommu *iommu, unsigned long npages)
-{
-	iopte_t *iopte, *limit, *first;
-	unsigned long cnum, ent, flush_point;
-
-	cnum = 0;
-	while ((1UL << cnum) < npages)
-		cnum++;
-	iopte  = (iommu->page_table +
-		  (cnum << (iommu->page_table_sz_bits - PBM_LOGCLUSTERS)));
-
-	if (cnum == 0)
-		limit = (iommu->page_table +
-			 iommu->lowest_consistent_map);
-	else
-		limit = (iopte +
-			 (1 << (iommu->page_table_sz_bits - PBM_LOGCLUSTERS)));
-
-	iopte += ((ent = iommu->alloc_info[cnum].next) << cnum);
-	flush_point = iommu->alloc_info[cnum].flush;
-	
-	first = iopte;
-	for (;;) {
-		if (IOPTE_IS_DUMMY(iommu, iopte)) {
-			if ((iopte + (1 << cnum)) >= limit)
-				ent = 0;
-			else
-				ent = ent + 1;
-			iommu->alloc_info[cnum].next = ent;
-			if (ent == flush_point)
-				__iommu_flushall(iommu);
-			break;
+	struct pci_iommu_arena *arena = &iommu->arena;
+	unsigned long n, i, start, end, limit;
+	int pass;
+
+	limit = arena->limit;
+	start = arena->hint;
+	pass = 0;
+
+again:
+	n = find_next_zero_bit(arena->map, limit, start);
+	end = n + npages;
+	if (unlikely(end >= limit)) {
+		if (likely(pass < 1)) {
+			limit = start;
+			start = 0;
+			__iommu_flushall(iommu);
+			pass++;
+			goto again;
+		} else {
+			/* Scanned the whole thing, give up. */
+			return -1;
 		}
-		iopte += (1 << cnum);
-		ent++;
-		if (iopte >= limit) {
-			iopte = (iommu->page_table +
-				 (cnum <<
-				  (iommu->page_table_sz_bits - PBM_LOGCLUSTERS)));
-			ent = 0;
+	}
+
+	for (i = n; i < end; i++) {
+		if (test_bit(i, arena->map)) {
+			start = i + 1;
+			goto again;
 		}
-		if (ent == flush_point)
-			__iommu_flushall(iommu);
-		if (iopte == first)
-			goto bad;
 	}
 
-	/* I've got your streaming cluster right here buddy boy... */
-	return iopte;
+	for (i = n; i < end; i++)
+		__set_bit(i, arena->map);
 
-bad:
-	printk(KERN_EMERG "pci_iommu: alloc_streaming_cluster of npages(%ld) failed!\n",
-	       npages);
-	return NULL;
+	arena->hint = end;
+
+	return n;
 }
 
-static void free_streaming_cluster(struct pci_iommu *iommu, dma_addr_t base,
-				   unsigned long npages, unsigned long ctx)
+static void pci_arena_free(struct pci_iommu_arena *arena, unsigned long base, unsigned long npages)
 {
-	unsigned long cnum, ent;
+	unsigned long i;
 
-	cnum = 0;
-	while ((1UL << cnum) < npages)
-		cnum++;
+	for (i = base; i < (base + npages); i++)
+		__clear_bit(i, arena->map);
+}
 
-	ent = (base << (32 - IO_PAGE_SHIFT + PBM_LOGCLUSTERS - iommu->page_table_sz_bits))
-		>> (32 + PBM_LOGCLUSTERS + cnum - iommu->page_table_sz_bits);
+void pci_iommu_table_init(struct pci_iommu *iommu, int tsbsize, u32 dma_offset, u32 dma_addr_mask)
+{
+	unsigned long i, tsbbase, order, sz, num_tsb_entries;
+
+	num_tsb_entries = tsbsize / sizeof(iopte_t);
+
+	/* Setup initial software IOMMU state. */
+	spin_lock_init(&iommu->lock);
+	iommu->ctx_lowest_free = 1;
+	iommu->page_table_map_base = dma_offset;
+	iommu->dma_addr_mask = dma_addr_mask;
+
+	/* Allocate and initialize the free area map.  */
+	sz = num_tsb_entries / 8;
+	sz = (sz + 7UL) & ~7UL;
+	iommu->arena.map = kmalloc(sz, GFP_KERNEL);
+	if (!iommu->arena.map) {
+		prom_printf("PCI_IOMMU: Error, kmalloc(arena.map) failed.\n");
+		prom_halt();
+	}
+	memset(iommu->arena.map, 0, sz);
+	iommu->arena.limit = num_tsb_entries;
 
-	/* If the global flush might not have caught this entry,
-	 * adjust the flush point such that we will flush before
-	 * ever trying to reuse it.
+	/* Allocate and initialize the dummy page which we
+	 * set inactive IO PTEs to point to.
 	 */
-#define between(X,Y,Z)	(((Z) - (Y)) >= ((X) - (Y)))
-	if (between(ent, iommu->alloc_info[cnum].next, iommu->alloc_info[cnum].flush))
-		iommu->alloc_info[cnum].flush = ent;
-#undef between
+	iommu->dummy_page = __get_free_pages(GFP_KERNEL, 0);
+	if (!iommu->dummy_page) {
+		prom_printf("PCI_IOMMU: Error, gfp(dummy_page) failed.\n");
+		prom_halt();
+	}
+	memset((void *)iommu->dummy_page, 0, PAGE_SIZE);
+	iommu->dummy_page_pa = (unsigned long) __pa(iommu->dummy_page);
+
+	/* Now allocate and setup the IOMMU page table itself.  */
+	order = get_order(tsbsize);
+	tsbbase = __get_free_pages(GFP_KERNEL, order);
+	if (!tsbbase) {
+		prom_printf("PCI_IOMMU: Error, gfp(tsb) failed.\n");
+		prom_halt();
+	}
+	iommu->page_table = (iopte_t *)tsbbase;
+
+	for (i = 0; i < num_tsb_entries; i++)
+		iopte_make_dummy(iommu, &iommu->page_table[i]);
 }
 
-/* We allocate consistent mappings from the end of cluster zero. */
-static iopte_t *alloc_consistent_cluster(struct pci_iommu *iommu, unsigned long npages)
+static inline iopte_t *alloc_npages(struct pci_iommu *iommu, unsigned long npages)
 {
-	iopte_t *iopte;
+	long entry;
 
-	iopte = iommu->page_table + (1 << (iommu->page_table_sz_bits - PBM_LOGCLUSTERS));
-	while (iopte > iommu->page_table) {
-		iopte--;
-		if (IOPTE_IS_DUMMY(iommu, iopte)) {
-			unsigned long tmp = npages;
+	entry = pci_arena_alloc(iommu, npages);
+	if (unlikely(entry < 0))
+		return NULL;
 
-			while (--tmp) {
-				iopte--;
-				if (!IOPTE_IS_DUMMY(iommu, iopte))
-					break;
-			}
-			if (tmp == 0) {
-				u32 entry = (iopte - iommu->page_table);
+	return iommu->page_table + entry;
+}
 
-				if (entry < iommu->lowest_consistent_map)
-					iommu->lowest_consistent_map = entry;
-				return iopte;
-			}
-		}
-	}
-	return NULL;
+static inline void free_npages(struct pci_iommu *iommu, dma_addr_t base, unsigned long npages)
+{
+	pci_arena_free(&iommu->arena, base >> IO_PAGE_SHIFT, npages);
 }
 
 static int iommu_alloc_ctx(struct pci_iommu *iommu)
@@ -233,7 +224,7 @@ void *pci_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_ad
 	struct pcidev_cookie *pcp;
 	struct pci_iommu *iommu;
 	iopte_t *iopte;
-	unsigned long flags, order, first_page, ctx;
+	unsigned long flags, order, first_page;
 	void *ret;
 	int npages;
 
@@ -251,9 +242,10 @@ void *pci_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_ad
 	iommu = pcp->pbm->iommu;
 
 	spin_lock_irqsave(&iommu->lock, flags);
-	iopte = alloc_consistent_cluster(iommu, size >> IO_PAGE_SHIFT);
-	if (iopte == NULL) {
-		spin_unlock_irqrestore(&iommu->lock, flags);
+	iopte = alloc_npages(iommu, size >> IO_PAGE_SHIFT);
+	spin_unlock_irqrestore(&iommu->lock, flags);
+
+	if (unlikely(iopte == NULL)) {
 		free_pages(first_page, order);
 		return NULL;
 	}
@@ -262,31 +254,15 @@ void *pci_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_ad
 		      ((iopte - iommu->page_table) << IO_PAGE_SHIFT));
 	ret = (void *) first_page;
 	npages = size >> IO_PAGE_SHIFT;
-	ctx = 0;
-	if (iommu->iommu_ctxflush)
-		ctx = iommu_alloc_ctx(iommu);
 	first_page = __pa(first_page);
 	while (npages--) {
-		iopte_val(*iopte) = (IOPTE_CONSISTENT(ctx) |
+		iopte_val(*iopte) = (IOPTE_CONSISTENT(0UL) |
 				     IOPTE_WRITE |
 				     (first_page & IOPTE_PAGE));
 		iopte++;
 		first_page += IO_PAGE_SIZE;
 	}
 
-	{
-		int i;
-		u32 daddr = *dma_addrp;
-
-		npages = size >> IO_PAGE_SHIFT;
-		for (i = 0; i < npages; i++) {
-			pci_iommu_write(iommu->iommu_flush, daddr);
-			daddr += IO_PAGE_SIZE;
-		}
-	}
-
-	spin_unlock_irqrestore(&iommu->lock, flags);
-
 	return ret;
 }
 
@@ -296,7 +272,7 @@ void pci_free_consistent(struct pci_dev *pdev, size_t size, void *cpu, dma_addr_
 	struct pcidev_cookie *pcp;
 	struct pci_iommu *iommu;
 	iopte_t *iopte;
-	unsigned long flags, order, npages, i, ctx;
+	unsigned long flags, order, npages;
 
 	npages = IO_PAGE_ALIGN(size) >> IO_PAGE_SHIFT;
 	pcp = pdev->sysdata;
@@ -306,46 +282,7 @@ void pci_free_consistent(struct pci_dev *pdev, size_t size, void *cpu, dma_addr_
 
 	spin_lock_irqsave(&iommu->lock, flags);
 
-	if ((iopte - iommu->page_table) ==
-	    iommu->lowest_consistent_map) {
-		iopte_t *walk = iopte + npages;
-		iopte_t *limit;
-
-		limit = (iommu->page_table +
-			 (1 << (iommu->page_table_sz_bits - PBM_LOGCLUSTERS)));
-		while (walk < limit) {
-			if (!IOPTE_IS_DUMMY(iommu, walk))
-				break;
-			walk++;
-		}
-		iommu->lowest_consistent_map =
-			(walk - iommu->page_table);
-	}
-
-	/* Data for consistent mappings cannot enter the streaming
-	 * buffers, so we only need to update the TSB.  We flush
-	 * the IOMMU here as well to prevent conflicts with the
-	 * streaming mapping deferred tlb flush scheme.
-	 */
-
-	ctx = 0;
-	if (iommu->iommu_ctxflush)
-		ctx = (iopte_val(*iopte) & IOPTE_CONTEXT) >> 47UL;
-
-	for (i = 0; i < npages; i++, iopte++)
-		iopte_make_dummy(iommu, iopte);
-
-	if (iommu->iommu_ctxflush) {
-		pci_iommu_write(iommu->iommu_ctxflush, ctx);
-	} else {
-		for (i = 0; i < npages; i++) {
-			u32 daddr = dvma + (i << IO_PAGE_SHIFT);
-
-			pci_iommu_write(iommu->iommu_flush, daddr);
-		}
-	}
-
-	iommu_free_ctx(iommu, ctx);
+	free_npages(iommu, dvma, npages);
 
 	spin_unlock_irqrestore(&iommu->lock, flags);
 
@@ -372,25 +309,27 @@ dma_addr_t pci_map_single(struct pci_dev *pdev, void *ptr, size_t sz, int direct
 	iommu = pcp->pbm->iommu;
 	strbuf = &pcp->pbm->stc;
 
-	if (direction == PCI_DMA_NONE)
-		BUG();
+	if (unlikely(direction == PCI_DMA_NONE))
+		goto bad_no_ctx;
 
 	oaddr = (unsigned long)ptr;
 	npages = IO_PAGE_ALIGN(oaddr + sz) - (oaddr & IO_PAGE_MASK);
 	npages >>= IO_PAGE_SHIFT;
 
 	spin_lock_irqsave(&iommu->lock, flags);
+	base = alloc_npages(iommu, npages);
+	ctx = 0;
+	if (iommu->iommu_ctxflush)
+		ctx = iommu_alloc_ctx(iommu);
+	spin_unlock_irqrestore(&iommu->lock, flags);
 
-	base = alloc_streaming_cluster(iommu, npages);
-	if (base == NULL)
+	if (unlikely(!base))
 		goto bad;
+
 	bus_addr = (iommu->page_table_map_base +
 		    ((base - iommu->page_table) << IO_PAGE_SHIFT));
 	ret = bus_addr | (oaddr & ~IO_PAGE_MASK);
 	base_paddr = __pa(oaddr & IO_PAGE_MASK);
-	ctx = 0;
-	if (iommu->iommu_ctxflush)
-		ctx = iommu_alloc_ctx(iommu);
 	if (strbuf->strbuf_enabled)
 		iopte_protection = IOPTE_STREAMING(ctx);
 	else
@@ -401,12 +340,13 @@ dma_addr_t pci_map_single(struct pci_dev *pdev, void *ptr, size_t sz, int direct
 	for (i = 0; i < npages; i++, base++, base_paddr += IO_PAGE_SIZE)
 		iopte_val(*base) = iopte_protection | base_paddr;
 
-	spin_unlock_irqrestore(&iommu->lock, flags);
-
 	return ret;
 
 bad:
-	spin_unlock_irqrestore(&iommu->lock, flags);
+	iommu_free_ctx(iommu, ctx);
+bad_no_ctx:
+	if (printk_ratelimit())
+		WARN_ON(1);
 	return PCI_DMA_ERROR_CODE;
 }
 
@@ -481,10 +421,13 @@ void pci_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int
 	struct pci_iommu *iommu;
 	struct pci_strbuf *strbuf;
 	iopte_t *base;
-	unsigned long flags, npages, ctx;
+	unsigned long flags, npages, ctx, i;
 
-	if (direction == PCI_DMA_NONE)
-		BUG();
+	if (unlikely(direction == PCI_DMA_NONE)) {
+		if (printk_ratelimit())
+			WARN_ON(1);
+		return;
+	}
 
 	pcp = pdev->sysdata;
 	iommu = pcp->pbm->iommu;
@@ -510,13 +453,14 @@ void pci_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int
 
 	/* Step 1: Kick data out of streaming buffers if necessary. */
 	if (strbuf->strbuf_enabled)
-		pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages, direction);
+		pci_strbuf_flush(strbuf, iommu, bus_addr, ctx,
+				 npages, direction);
 
-	/* Step 2: Clear out first TSB entry. */
-	iopte_make_dummy(iommu, base);
+	/* Step 2: Clear out TSB entries. */
+	for (i = 0; i < npages; i++)
+		iopte_make_dummy(iommu, base + i);
 
-	free_streaming_cluster(iommu, bus_addr - iommu->page_table_map_base,
-			       npages, ctx);
+	free_npages(iommu, bus_addr - iommu->page_table_map_base, npages);
 
 	iommu_free_ctx(iommu, ctx);
 
@@ -621,6 +565,8 @@ int pci_map_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, int
 			pci_map_single(pdev,
 				       (page_address(sglist->page) + sglist->offset),
 				       sglist->length, direction);
+		if (unlikely(sglist->dma_address == PCI_DMA_ERROR_CODE))
+			return 0;
 		sglist->dma_length = sglist->length;
 		return 1;
 	}
@@ -629,21 +575,29 @@ int pci_map_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, int
 	iommu = pcp->pbm->iommu;
 	strbuf = &pcp->pbm->stc;
 	
-	if (direction == PCI_DMA_NONE)
-		BUG();
+	if (unlikely(direction == PCI_DMA_NONE))
+		goto bad_no_ctx;
 
 	/* Step 1: Prepare scatter list. */
 
 	npages = prepare_sg(sglist, nelems);
 
-	/* Step 2: Allocate a cluster. */
+	/* Step 2: Allocate a cluster and context, if necessary. */
 
 	spin_lock_irqsave(&iommu->lock, flags);
 
-	base = alloc_streaming_cluster(iommu, npages);
+	base = alloc_npages(iommu, npages);
+	ctx = 0;
+	if (iommu->iommu_ctxflush)
+		ctx = iommu_alloc_ctx(iommu);
+
+	spin_unlock_irqrestore(&iommu->lock, flags);
+
 	if (base == NULL)
 		goto bad;
-	dma_base = iommu->page_table_map_base + ((base - iommu->page_table) << IO_PAGE_SHIFT);
+
+	dma_base = iommu->page_table_map_base +
+		((base - iommu->page_table) << IO_PAGE_SHIFT);
 
 	/* Step 3: Normalize DMA addresses. */
 	used = nelems;
@@ -656,30 +610,28 @@ int pci_map_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, int
 	}
 	used = nelems - used;
 
-	/* Step 4: Choose a context if necessary. */
-	ctx = 0;
-	if (iommu->iommu_ctxflush)
-		ctx = iommu_alloc_ctx(iommu);
-
-	/* Step 5: Create the mappings. */
+	/* Step 4: Create the mappings. */
 	if (strbuf->strbuf_enabled)
 		iopte_protection = IOPTE_STREAMING(ctx);
 	else
 		iopte_protection = IOPTE_CONSISTENT(ctx);
 	if (direction != PCI_DMA_TODEVICE)
 		iopte_protection |= IOPTE_WRITE;
-	fill_sg (base, sglist, used, nelems, iopte_protection);
+
+	fill_sg(base, sglist, used, nelems, iopte_protection);
+
 #ifdef VERIFY_SG
 	verify_sglist(sglist, nelems, base, npages);
 #endif
 
-	spin_unlock_irqrestore(&iommu->lock, flags);
-
 	return used;
 
 bad:
-	spin_unlock_irqrestore(&iommu->lock, flags);
-	return PCI_DMA_ERROR_CODE;
+	iommu_free_ctx(iommu, ctx);
+bad_no_ctx:
+	if (printk_ratelimit())
+		WARN_ON(1);
+	return 0;
 }
 
 /* Unmap a set of streaming mode DMA translations. */
@@ -692,8 +644,10 @@ void pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems,
 	unsigned long flags, ctx, i, npages;
 	u32 bus_addr;
 
-	if (direction == PCI_DMA_NONE)
-		BUG();
+	if (unlikely(direction == PCI_DMA_NONE)) {
+		if (printk_ratelimit())
+			WARN_ON(1);
+	}
 
 	pcp = pdev->sysdata;
 	iommu = pcp->pbm->iommu;
@@ -705,7 +659,8 @@ void pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems,
 		if (sglist[i].dma_length == 0)
 			break;
 	i--;
-	npages = (IO_PAGE_ALIGN(sglist[i].dma_address + sglist[i].dma_length) - bus_addr) >> IO_PAGE_SHIFT;
+	npages = (IO_PAGE_ALIGN(sglist[i].dma_address + sglist[i].dma_length) -
+		  bus_addr) >> IO_PAGE_SHIFT;
 
 	base = iommu->page_table +
 		((bus_addr - iommu->page_table_map_base) >> IO_PAGE_SHIFT);
@@ -726,11 +681,11 @@ void pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems,
 	if (strbuf->strbuf_enabled)
 		pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages, direction);
 
-	/* Step 2: Clear out first TSB entry. */
-	iopte_make_dummy(iommu, base);
+	/* Step 2: Clear out the TSB entries. */
+	for (i = 0; i < npages; i++)
+		iopte_make_dummy(iommu, base + i);
 
-	free_streaming_cluster(iommu, bus_addr - iommu->page_table_map_base,
-			       npages, ctx);
+	free_npages(iommu, bus_addr - iommu->page_table_map_base, npages);
 
 	iommu_free_ctx(iommu, ctx);
 
diff --git a/arch/sparc64/kernel/pci_psycho.c b/arch/sparc64/kernel/pci_psycho.c
index 6ed1ef25e0ac..c03ed5f49d31 100644
--- a/arch/sparc64/kernel/pci_psycho.c
+++ b/arch/sparc64/kernel/pci_psycho.c
@@ -1207,13 +1207,9 @@ static void psycho_scan_bus(struct pci_controller_info *p)
 static void psycho_iommu_init(struct pci_controller_info *p)
 {
 	struct pci_iommu *iommu = p->pbm_A.iommu;
-	unsigned long tsbbase, i;
+	unsigned long i;
 	u64 control;
 
-	/* Setup initial software IOMMU state. */
-	spin_lock_init(&iommu->lock);
-	iommu->ctx_lowest_free = 1;
-
 	/* Register addresses. */
 	iommu->iommu_control  = p->pbm_A.controller_regs + PSYCHO_IOMMU_CONTROL;
 	iommu->iommu_tsbbase  = p->pbm_A.controller_regs + PSYCHO_IOMMU_TSBBASE;
@@ -1240,40 +1236,10 @@ static void psycho_iommu_init(struct pci_controller_info *p)
 	/* Leave diag mode enabled for full-flushing done
 	 * in pci_iommu.c
 	 */
+	pci_iommu_table_init(iommu, IO_TSB_SIZE, 0xc0000000, 0xffffffff);
 
-	iommu->dummy_page = __get_free_pages(GFP_KERNEL, 0);
-	if (!iommu->dummy_page) {
-		prom_printf("PSYCHO_IOMMU: Error, gfp(dummy_page) failed.\n");
-		prom_halt();
-	}
-	memset((void *)iommu->dummy_page, 0, PAGE_SIZE);
-	iommu->dummy_page_pa = (unsigned long) __pa(iommu->dummy_page);
-
-	/* Using assumed page size 8K with 128K entries we need 1MB iommu page
-	 * table (128K ioptes * 8 bytes per iopte).  This is
-	 * page order 7 on UltraSparc.
-	 */
-	tsbbase = __get_free_pages(GFP_KERNEL, get_order(IO_TSB_SIZE));
-	if (!tsbbase) {
-		prom_printf("PSYCHO_IOMMU: Error, gfp(tsb) failed.\n");
-		prom_halt();
-	}
-	iommu->page_table = (iopte_t *)tsbbase;
-	iommu->page_table_sz_bits = 17;
-	iommu->page_table_map_base = 0xc0000000;
-	iommu->dma_addr_mask = 0xffffffff;
-	pci_iommu_table_init(iommu, IO_TSB_SIZE);
-
-	/* We start with no consistent mappings. */
-	iommu->lowest_consistent_map =
-		1 << (iommu->page_table_sz_bits - PBM_LOGCLUSTERS);
-
-	for (i = 0; i < PBM_NCLUSTERS; i++) {
-		iommu->alloc_info[i].flush = 0;
-		iommu->alloc_info[i].next = 0;
-	}
-
-	psycho_write(p->pbm_A.controller_regs + PSYCHO_IOMMU_TSBBASE, __pa(tsbbase));
+	psycho_write(p->pbm_A.controller_regs + PSYCHO_IOMMU_TSBBASE,
+		     __pa(iommu->page_table));
 
 	control = psycho_read(p->pbm_A.controller_regs + PSYCHO_IOMMU_CONTROL);
 	control &= ~(PSYCHO_IOMMU_CTRL_TSBSZ | PSYCHO_IOMMU_CTRL_TBWSZ);
@@ -1281,7 +1247,7 @@ static void psycho_iommu_init(struct pci_controller_info *p)
 	psycho_write(p->pbm_A.controller_regs + PSYCHO_IOMMU_CONTROL, control);
 
 	/* If necessary, hook us up for starfire IRQ translations. */
-	if(this_is_starfire)
+	if (this_is_starfire)
 		p->starfire_cookie = starfire_hookup(p->pbm_A.portid);
 	else
 		p->starfire_cookie = NULL;
diff --git a/arch/sparc64/kernel/pci_sabre.c b/arch/sparc64/kernel/pci_sabre.c
index 0ee6bd5b9ac6..da8e1364194f 100644
--- a/arch/sparc64/kernel/pci_sabre.c
+++ b/arch/sparc64/kernel/pci_sabre.c
@@ -1267,13 +1267,9 @@ static void sabre_iommu_init(struct pci_controller_info *p,
 			     u32 dma_mask)
 {
 	struct pci_iommu *iommu = p->pbm_A.iommu;
-	unsigned long tsbbase, i, order;
+	unsigned long i;
 	u64 control;
 
-	/* Setup initial software IOMMU state. */
-	spin_lock_init(&iommu->lock);
-	iommu->ctx_lowest_free = 1;
-
 	/* Register addresses. */
 	iommu->iommu_control  = p->pbm_A.controller_regs + SABRE_IOMMU_CONTROL;
 	iommu->iommu_tsbbase  = p->pbm_A.controller_regs + SABRE_IOMMU_TSBBASE;
@@ -1295,26 +1291,10 @@ static void sabre_iommu_init(struct pci_controller_info *p,
 	/* Leave diag mode enabled for full-flushing done
 	 * in pci_iommu.c
 	 */
+	pci_iommu_table_init(iommu, tsbsize * 1024 * 8, dvma_offset, dma_mask);
 
-	iommu->dummy_page = __get_free_pages(GFP_KERNEL, 0);
-	if (!iommu->dummy_page) {
-		prom_printf("PSYCHO_IOMMU: Error, gfp(dummy_page) failed.\n");
-		prom_halt();
-	}
-	memset((void *)iommu->dummy_page, 0, PAGE_SIZE);
-	iommu->dummy_page_pa = (unsigned long) __pa(iommu->dummy_page);
-
-	tsbbase = __get_free_pages(GFP_KERNEL, order = get_order(tsbsize * 1024 * 8));
-	if (!tsbbase) {
-		prom_printf("SABRE_IOMMU: Error, gfp(tsb) failed.\n");
-		prom_halt();
-	}
-	iommu->page_table = (iopte_t *)tsbbase;
-	iommu->page_table_map_base = dvma_offset;
-	iommu->dma_addr_mask = dma_mask;
-	pci_iommu_table_init(iommu, PAGE_SIZE << order);
-
-	sabre_write(p->pbm_A.controller_regs + SABRE_IOMMU_TSBBASE, __pa(tsbbase));
+	sabre_write(p->pbm_A.controller_regs + SABRE_IOMMU_TSBBASE,
+		    __pa(iommu->page_table));
 
 	control = sabre_read(p->pbm_A.controller_regs + SABRE_IOMMU_CONTROL);
 	control &= ~(SABRE_IOMMUCTRL_TSBSZ | SABRE_IOMMUCTRL_TBWSZ);
@@ -1322,11 +1302,9 @@ static void sabre_iommu_init(struct pci_controller_info *p,
 	switch(tsbsize) {
 	case 64:
 		control |= SABRE_IOMMU_TSBSZ_64K;
-		iommu->page_table_sz_bits = 16;
 		break;
 	case 128:
 		control |= SABRE_IOMMU_TSBSZ_128K;
-		iommu->page_table_sz_bits = 17;
 		break;
 	default:
 		prom_printf("iommu_init: Illegal TSB size %d\n", tsbsize);
@@ -1334,15 +1312,6 @@ static void sabre_iommu_init(struct pci_controller_info *p,
 		break;
 	}
 	sabre_write(p->pbm_A.controller_regs + SABRE_IOMMU_CONTROL, control);
-
-	/* We start with no consistent mappings. */
-	iommu->lowest_consistent_map =
-		1 << (iommu->page_table_sz_bits - PBM_LOGCLUSTERS);
-
-	for (i = 0; i < PBM_NCLUSTERS; i++) {
-		iommu->alloc_info[i].flush = 0;
-		iommu->alloc_info[i].next = 0;
-	}
 }
 
 static void pbm_register_toplevel_resources(struct pci_controller_info *p,
diff --git a/arch/sparc64/kernel/pci_schizo.c b/arch/sparc64/kernel/pci_schizo.c
index 331382e1a75d..d8c4e0919b4e 100644
--- a/arch/sparc64/kernel/pci_schizo.c
+++ b/arch/sparc64/kernel/pci_schizo.c
@@ -330,7 +330,7 @@ static int schizo_ino_to_pil(struct pci_dev *pdev, unsigned int ino)
 static void tomatillo_wsync_handler(struct ino_bucket *bucket, void *_arg1, void *_arg2)
 {
 	unsigned long sync_reg = (unsigned long) _arg2;
-	u64 mask = 1 << (__irq_ino(__irq(bucket)) & IMAP_INO);
+	u64 mask = 1UL << (__irq_ino(__irq(bucket)) & IMAP_INO);
 	u64 val;
 	int limit;
 
@@ -1765,7 +1765,7 @@ static void schizo_pbm_strbuf_init(struct pci_pbm_info *pbm)
 static void schizo_pbm_iommu_init(struct pci_pbm_info *pbm)
 {
 	struct pci_iommu *iommu = pbm->iommu;
-	unsigned long tsbbase, i, tagbase, database, order;
+	unsigned long i, tagbase, database;
 	u32 vdma[2], dma_mask;
 	u64 control;
 	int err, tsbsize;
@@ -1800,10 +1800,6 @@ static void schizo_pbm_iommu_init(struct pci_pbm_info *pbm)
 			prom_halt();
 	};
 
-	/* Setup initial software IOMMU state. */
-	spin_lock_init(&iommu->lock);
-	iommu->ctx_lowest_free = 1;
-
 	/* Register addresses, SCHIZO has iommu ctx flushing. */
 	iommu->iommu_control  = pbm->pbm_regs + SCHIZO_IOMMU_CONTROL;
 	iommu->iommu_tsbbase  = pbm->pbm_regs + SCHIZO_IOMMU_TSBBASE;
@@ -1832,56 +1828,9 @@ static void schizo_pbm_iommu_init(struct pci_pbm_info *pbm)
 	/* Leave diag mode enabled for full-flushing done
 	 * in pci_iommu.c
 	 */
+	pci_iommu_table_init(iommu, tsbsize * 8 * 1024, vdma[0], dma_mask);
 
-	iommu->dummy_page = __get_free_pages(GFP_KERNEL, 0);
-	if (!iommu->dummy_page) {
-		prom_printf("PSYCHO_IOMMU: Error, gfp(dummy_page) failed.\n");
-		prom_halt();
-	}
-	memset((void *)iommu->dummy_page, 0, PAGE_SIZE);
-	iommu->dummy_page_pa = (unsigned long) __pa(iommu->dummy_page);
-
-	/* Using assumed page size 8K with 128K entries we need 1MB iommu page
-	 * table (128K ioptes * 8 bytes per iopte).  This is
-	 * page order 7 on UltraSparc.
-	 */
-	order = get_order(tsbsize * 8 * 1024);
-	tsbbase = __get_free_pages(GFP_KERNEL, order);
-	if (!tsbbase) {
-		prom_printf("%s: Error, gfp(tsb) failed.\n", pbm->name);
-		prom_halt();
-	}
-
-	iommu->page_table = (iopte_t *)tsbbase;
-	iommu->page_table_map_base = vdma[0];
-	iommu->dma_addr_mask = dma_mask;
-	pci_iommu_table_init(iommu, PAGE_SIZE << order);
-
-	switch (tsbsize) {
-	case 64:
-		iommu->page_table_sz_bits = 16;
-		break;
-
-	case 128:
-		iommu->page_table_sz_bits = 17;
-		break;
-
-	default:
-		prom_printf("iommu_init: Illegal TSB size %d\n", tsbsize);
-		prom_halt();
-		break;
-	};
-
-	/* We start with no consistent mappings. */
-	iommu->lowest_consistent_map =
-		1 << (iommu->page_table_sz_bits - PBM_LOGCLUSTERS);
-
-	for (i = 0; i < PBM_NCLUSTERS; i++) {
-		iommu->alloc_info[i].flush = 0;
-		iommu->alloc_info[i].next = 0;
-	}
-
-	schizo_write(iommu->iommu_tsbbase, __pa(tsbbase));
+	schizo_write(iommu->iommu_tsbbase, __pa(iommu->page_table));
 
 	control = schizo_read(iommu->iommu_control);
 	control &= ~(SCHIZO_IOMMU_CTRL_TSBSZ | SCHIZO_IOMMU_CTRL_TBWSZ);
diff --git a/arch/sparc64/kernel/power.c b/arch/sparc64/kernel/power.c
index 946cee0257ea..9e8362ea3104 100644
--- a/arch/sparc64/kernel/power.c
+++ b/arch/sparc64/kernel/power.c
@@ -17,6 +17,7 @@
 
 #include <asm/system.h>
 #include <asm/ebus.h>
+#include <asm/isa.h>
 #include <asm/auxio.h>
 
 #include <linux/unistd.h>
@@ -100,46 +101,83 @@ again:
 	return 0;
 }
 
-static int __init has_button_interrupt(struct linux_ebus_device *edev)
+static int __init has_button_interrupt(unsigned int irq, int prom_node)
 {
-	if (edev->irqs[0] == PCI_IRQ_NONE)
+	if (irq == PCI_IRQ_NONE)
 		return 0;
-	if (!prom_node_has_property(edev->prom_node, "button"))
+	if (!prom_node_has_property(prom_node, "button"))
 		return 0;
 
 	return 1;
 }
 
-void __init power_init(void)
+static int __init power_probe_ebus(struct resource **resp, unsigned int *irq_p, int *prom_node_p)
 {
 	struct linux_ebus *ebus;
 	struct linux_ebus_device *edev;
+
+	for_each_ebus(ebus) {
+		for_each_ebusdev(edev, ebus) {
+			if (!strcmp(edev->prom_name, "power")) {
+				*resp = &edev->resource[0];
+				*irq_p = edev->irqs[0];
+				*prom_node_p = edev->prom_node;
+				return 0;
+			}
+		}
+	}
+	return -ENODEV;
+}
+
+static int __init power_probe_isa(struct resource **resp, unsigned int *irq_p, int *prom_node_p)
+{
+	struct sparc_isa_bridge *isa_bus;
+	struct sparc_isa_device *isa_dev;
+
+	for_each_isa(isa_bus) {
+		for_each_isadev(isa_dev, isa_bus) {
+			if (!strcmp(isa_dev->prom_name, "power")) {
+				*resp = &isa_dev->resource;
+				*irq_p = isa_dev->irq;
+				*prom_node_p = isa_dev->prom_node;
+				return 0;
+			}
+		}
+	}
+	return -ENODEV;
+}
+
+void __init power_init(void)
+{
+	struct resource *res = NULL;
+	unsigned int irq;
+	int prom_node;
 	static int invoked;
 
 	if (invoked)
 		return;
 	invoked = 1;
 
-	for_each_ebus(ebus) {
-		for_each_ebusdev(edev, ebus) {
-			if (!strcmp(edev->prom_name, "power"))
-				goto found;
-		}
-	}
+	if (!power_probe_ebus(&res, &irq, &prom_node))
+		goto found;
+
+	if (!power_probe_isa(&res, &irq, &prom_node))
+		goto found;
+
 	return;
 
 found:
-	power_reg = ioremap(edev->resource[0].start, 0x4);
+	power_reg = ioremap(res->start, 0x4);
 	printk("power: Control reg at %p ... ", power_reg);
 	poweroff_method = machine_halt;  /* able to use the standard halt */
-	if (has_button_interrupt(edev)) {
+	if (has_button_interrupt(irq, prom_node)) {
 		if (kernel_thread(powerd, NULL, CLONE_FS) < 0) {
 			printk("Failed to start power daemon.\n");
 			return;
 		}
 		printk("powerd running.\n");
 
-		if (request_irq(edev->irqs[0],
+		if (request_irq(irq,
 				power_handler, SA_SHIRQ, "power", NULL) < 0)
 			printk("power: Error, cannot register IRQ handler.\n");
 	} else {
diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c
index 7d10b0397091..02f9dec1d459 100644
--- a/arch/sparc64/kernel/process.c
+++ b/arch/sparc64/kernel/process.c
@@ -74,7 +74,9 @@ void cpu_idle(void)
 		while (!need_resched())
 			barrier();
 
+		preempt_enable_no_resched();
 		schedule();
+		preempt_disable();
 		check_pgt_cache();
 	}
 }
@@ -83,21 +85,31 @@ void cpu_idle(void)
 
 /*
  * the idle loop on a UltraMultiPenguin...
+ *
+ * TIF_POLLING_NRFLAG is set because we do not sleep the cpu
+ * inside of the idler task, so an interrupt is not needed
+ * to get a clean fast response.
+ *
+ * XXX Reverify this assumption... -DaveM
+ *
+ * Addendum: We do want it to do something for the signal
+ *           delivery case, we detect that by just seeing
+ *           if we are trying to send this to an idler or not.
  */
-#define idle_me_harder()	(cpu_data(smp_processor_id()).idle_volume += 1)
-#define unidle_me()		(cpu_data(smp_processor_id()).idle_volume = 0)
 void cpu_idle(void)
 {
+	cpuinfo_sparc *cpuinfo = &local_cpu_data();
 	set_thread_flag(TIF_POLLING_NRFLAG);
+
 	while(1) {
 		if (need_resched()) {
-			unidle_me();
-			clear_thread_flag(TIF_POLLING_NRFLAG);
+			cpuinfo->idle_volume = 0;
+			preempt_enable_no_resched();
 			schedule();
-			set_thread_flag(TIF_POLLING_NRFLAG);
+			preempt_disable();
 			check_pgt_cache();
 		}
-		idle_me_harder();
+		cpuinfo->idle_volume++;
 
 		/* The store ordering is so that IRQ handlers on
 		 * other cpus see our increasing idleness for the buddy
diff --git a/arch/sparc64/kernel/ptrace.c b/arch/sparc64/kernel/ptrace.c
index 5efbff90d668..774ecbb8a031 100644
--- a/arch/sparc64/kernel/ptrace.c
+++ b/arch/sparc64/kernel/ptrace.c
@@ -31,6 +31,7 @@
 #include <asm/visasm.h>
 #include <asm/spitfire.h>
 #include <asm/page.h>
+#include <asm/cpudata.h>
 
 /* Returning from ptrace is a bit tricky because the syscall return
  * low level code assumes any value returned which is negative and
@@ -132,12 +133,16 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
 	if ((uaddr ^ (unsigned long) kaddr) & (1UL << 13)) {
 		unsigned long start = __pa(kaddr);
 		unsigned long end = start + len;
+		unsigned long dcache_line_size;
+
+		dcache_line_size = local_cpu_data().dcache_line_size;
 
 		if (tlb_type == spitfire) {
-			for (; start < end; start += 32)
+			for (; start < end; start += dcache_line_size)
 				spitfire_put_dcache_tag(start & 0x3fe0, 0x0);
 		} else {
-			for (; start < end; start += 32)
+			start &= ~(dcache_line_size - 1);
+			for (; start < end; start += dcache_line_size)
 				__asm__ __volatile__(
 					"stxa %%g0, [%0] %1\n\t"
 					"membar #Sync"
@@ -150,8 +155,11 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
 	if (write && tlb_type == spitfire) {
 		unsigned long start = (unsigned long) kaddr;
 		unsigned long end = start + len;
+		unsigned long icache_line_size;
+
+		icache_line_size = local_cpu_data().icache_line_size;
 
-		for (; start < end; start += 32)
+		for (; start < end; start += icache_line_size)
 			flushi(start);
 	}
 }
diff --git a/arch/sparc64/kernel/rtrap.S b/arch/sparc64/kernel/rtrap.S
index fafd227735fa..090dcca00d2a 100644
--- a/arch/sparc64/kernel/rtrap.S
+++ b/arch/sparc64/kernel/rtrap.S
@@ -256,9 +256,8 @@ rt_continue:	ldx			[%sp + PTREGS_OFF + PT_V9_G1], %g1
 		brnz,pn			%l3, kern_rtt
 		 mov			PRIMARY_CONTEXT, %l7
 		ldxa			[%l7 + %l7] ASI_DMMU, %l0
-cplus_rtrap_insn_1:
-		sethi			%hi(0), %l1
-		sllx			%l1, 32, %l1
+		sethi			%hi(sparc64_kern_pri_nuc_bits), %l1
+		ldx			[%l1 + %lo(sparc64_kern_pri_nuc_bits)], %l1
 		or			%l0, %l1, %l0
 		stxa			%l0, [%l7] ASI_DMMU
 		flush			%g6
@@ -313,53 +312,36 @@ kern_fpucheck:	ldub			[%g6 + TI_FPDEPTH], %l5
 		wr			%g1, FPRS_FEF, %fprs
 		ldx			[%o1 + %o5], %g1
 		add			%g6, TI_XFSR, %o1
-		membar			#StoreLoad | #LoadLoad
 		sll			%o0, 8, %o2
 		add			%g6, TI_FPREGS, %o3
 		brz,pn			%l6, 1f
 		 add			%g6, TI_FPREGS+0x40, %o4
 
+		membar			#Sync
 		ldda			[%o3 + %o2] ASI_BLK_P, %f0
 		ldda			[%o4 + %o2] ASI_BLK_P, %f16
+		membar			#Sync
 1:		andcc			%l2, FPRS_DU, %g0
 		be,pn			%icc, 1f
 		 wr			%g1, 0, %gsr
 		add			%o2, 0x80, %o2
+		membar			#Sync
 		ldda			[%o3 + %o2] ASI_BLK_P, %f32
 		ldda			[%o4 + %o2] ASI_BLK_P, %f48
-
 1:		membar			#Sync
 		ldx			[%o1 + %o5], %fsr
 2:		stb			%l5, [%g6 + TI_FPDEPTH]
 		ba,pt			%xcc, rt_continue
 		 nop
 5:		wr			%g0, FPRS_FEF, %fprs
-		membar			#StoreLoad | #LoadLoad
 		sll			%o0, 8, %o2
 
 		add			%g6, TI_FPREGS+0x80, %o3
 		add			%g6, TI_FPREGS+0xc0, %o4
+		membar			#Sync
 		ldda			[%o3 + %o2] ASI_BLK_P, %f32
 		ldda			[%o4 + %o2] ASI_BLK_P, %f48
 		membar			#Sync
 		wr			%g0, FPRS_DU, %fprs
 		ba,pt			%xcc, rt_continue
 		 stb			%l5, [%g6 + TI_FPDEPTH]
-
-cplus_rinsn_1:
-		sethi			%uhi(CTX_CHEETAH_PLUS_NUC), %l1
-
-		.globl			cheetah_plus_patch_rtrap
-cheetah_plus_patch_rtrap:
-		/* We configure the dTLB512_0 for 4MB pages and the
-		 * dTLB512_1 for 8K pages when in context zero.
-		 */
-		sethi			%hi(cplus_rinsn_1), %o0
-		sethi			%hi(cplus_rtrap_insn_1), %o2
-		lduw			[%o0 + %lo(cplus_rinsn_1)], %o1
-		or			%o2, %lo(cplus_rtrap_insn_1), %o2
-		stw			%o1, [%o2]
-		flush			%o2
-
-		retl
-		 nop
diff --git a/arch/sparc64/kernel/sbus.c b/arch/sparc64/kernel/sbus.c
index e09ddf927655..d95a1bcf163d 100644
--- a/arch/sparc64/kernel/sbus.c
+++ b/arch/sparc64/kernel/sbus.c
@@ -327,7 +327,7 @@ void *sbus_alloc_consistent(struct sbus_dev *sdev, size_t size, dma_addr_t *dvma
 	order = get_order(size);
 	if (order >= 10)
 		return NULL;
-	first_page = __get_free_pages(GFP_KERNEL, order);
+	first_page = __get_free_pages(GFP_KERNEL|__GFP_COMP, order);
 	if (first_page == 0UL)
 		return NULL;
 	memset((char *)first_page, 0, PAGE_SIZE << order);
@@ -790,7 +790,7 @@ static unsigned long sysio_irq_offsets[] = {
 
 #undef bogon
 
-#define NUM_SYSIO_OFFSETS (sizeof(sysio_irq_offsets) / sizeof(sysio_irq_offsets[0]))
+#define NUM_SYSIO_OFFSETS ARRAY_SIZE(sysio_irq_offsets)
 
 /* Convert Interrupt Mapping register pointer to associated
  * Interrupt Clear register pointer, SYSIO specific version.
diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c
index ddbed3341a23..48180531562f 100644
--- a/arch/sparc64/kernel/setup.c
+++ b/arch/sparc64/kernel/setup.c
@@ -154,6 +154,7 @@ int prom_callback(long *args)
 			pud_t *pudp;
 			pmd_t *pmdp;
 			pte_t *ptep;
+			pte_t pte;
 
 			for_each_process(p) {
 				mm = p->mm;
@@ -178,8 +179,9 @@ int prom_callback(long *args)
 			 * being called from inside OBP.
 			 */
 			ptep = pte_offset_map(pmdp, va);
-			if (pte_present(*ptep)) {
-				tte = pte_val(*ptep);
+			pte = *ptep;
+			if (pte_present(pte)) {
+				tte = pte_val(pte);
 				res = PROM_TRUE;
 			}
 			pte_unmap(ptep);
@@ -187,17 +189,13 @@ int prom_callback(long *args)
 		}
 
 		if ((va >= KERNBASE) && (va < (KERNBASE + (4 * 1024 * 1024)))) {
-			unsigned long kernel_pctx = 0;
-
-			if (tlb_type == cheetah_plus)
-				kernel_pctx |= (CTX_CHEETAH_PLUS_NUC |
-						CTX_CHEETAH_PLUS_CTX0);
+			extern unsigned long sparc64_kern_pri_context;
 
 			/* Spitfire Errata #32 workaround */
 			__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
 					     "flush	%%g6"
 					     : /* No outputs */
-					     : "r" (kernel_pctx),
+					     : "r" (sparc64_kern_pri_context),
 					       "r" (PRIMARY_CONTEXT),
 					       "i" (ASI_DMMU));
 
@@ -222,6 +220,7 @@ int prom_callback(long *args)
 			pud_t *pudp;
 			pmd_t *pmdp;
 			pte_t *ptep;
+			pte_t pte;
 			int error;
 
 			if ((va >= LOW_OBP_ADDRESS) && (va < HI_OBP_ADDRESS)) {
@@ -244,8 +243,9 @@ int prom_callback(long *args)
 			 * being called from inside OBP.
 			 */
 			ptep = pte_offset_kernel(pmdp, va);
-			if (pte_present(*ptep)) {
-				tte = pte_val(*ptep);
+			pte = *ptep;
+			if (pte_present(pte)) {
+				tte = pte_val(pte);
 				res = PROM_TRUE;
 			}
 			goto done;
@@ -464,8 +464,6 @@ static void __init boot_flags_init(char *commands)
 	}
 }
 
-extern int prom_probe_memory(void);
-extern unsigned long start, end;
 extern void panic_setup(char *, int *);
 
 extern unsigned short root_flags;
@@ -492,13 +490,8 @@ void register_prom_callbacks(void)
 		   "' linux-.soft2 to .soft2");
 }
 
-extern void paging_init(void);
-
 void __init setup_arch(char **cmdline_p)
 {
-	unsigned long highest_paddr;
-	int i;
-
 	/* Initialize PROM console and command line. */
 	*cmdline_p = prom_getbootargs();
 	strcpy(saved_command_line, *cmdline_p);
@@ -517,40 +510,6 @@ void __init setup_arch(char **cmdline_p)
 	boot_flags_init(*cmdline_p);
 
 	idprom_init();
-	(void) prom_probe_memory();
-
-	/* In paging_init() we tip off this value to see if we need
-	 * to change init_mm.pgd to point to the real alias mapping.
-	 */
-	phys_base = 0xffffffffffffffffUL;
-	highest_paddr = 0UL;
-	for (i = 0; sp_banks[i].num_bytes != 0; i++) {
-		unsigned long top;
-
-		if (sp_banks[i].base_addr < phys_base)
-			phys_base = sp_banks[i].base_addr;
-		top = sp_banks[i].base_addr +
-			sp_banks[i].num_bytes;
-		if (highest_paddr < top)
-			highest_paddr = top;
-	}
-	pfn_base = phys_base >> PAGE_SHIFT;
-
-	switch (tlb_type) {
-	default:
-	case spitfire:
-		kern_base = spitfire_get_itlb_data(sparc64_highest_locked_tlbent());
-		kern_base &= _PAGE_PADDR_SF;
-		break;
-
-	case cheetah:
-	case cheetah_plus:
-		kern_base = cheetah_get_litlb_data(sparc64_highest_locked_tlbent());
-		kern_base &= _PAGE_PADDR;
-		break;
-	};
-
-	kern_size = (unsigned long)&_end - (unsigned long)KERNBASE;
 
 	if (!root_flags)
 		root_mountflags &= ~MS_RDONLY;
@@ -625,6 +584,11 @@ extern void smp_info(struct seq_file *);
 extern void smp_bogo(struct seq_file *);
 extern void mmu_info(struct seq_file *);
 
+unsigned int dcache_parity_tl1_occurred;
+unsigned int icache_parity_tl1_occurred;
+
+static int ncpus_probed;
+
 static int show_cpuinfo(struct seq_file *m, void *__unused)
 {
 	seq_printf(m, 
@@ -633,8 +597,10 @@ static int show_cpuinfo(struct seq_file *m, void *__unused)
 		   "promlib\t\t: Version 3 Revision %d\n"
 		   "prom\t\t: %d.%d.%d\n"
 		   "type\t\t: sun4u\n"
-		   "ncpus probed\t: %ld\n"
-		   "ncpus active\t: %ld\n"
+		   "ncpus probed\t: %d\n"
+		   "ncpus active\t: %d\n"
+		   "D$ parity tl1\t: %u\n"
+		   "I$ parity tl1\t: %u\n"
 #ifndef CONFIG_SMP
 		   "Cpu0Bogo\t: %lu.%02lu\n"
 		   "Cpu0ClkTck\t: %016lx\n"
@@ -646,8 +612,10 @@ static int show_cpuinfo(struct seq_file *m, void *__unused)
 		   prom_prev >> 16,
 		   (prom_prev >> 8) & 0xff,
 		   prom_prev & 0xff,
-		   (long)num_possible_cpus(),
-		   (long)num_online_cpus()
+		   ncpus_probed,
+		   num_online_cpus(),
+		   dcache_parity_tl1_occurred,
+		   icache_parity_tl1_occurred
 #ifndef CONFIG_SMP
 		   , cpu_data(0).udelay_val/(500000/HZ),
 		   (cpu_data(0).udelay_val/(5000/HZ)) % 100,
@@ -711,6 +679,15 @@ static int __init topology_init(void)
 	int i, err;
 
 	err = -ENOMEM;
+
+	/* Count the number of physically present processors in
+	 * the machine, even on uniprocessor, so that /proc/cpuinfo
+	 * output is consistent with 2.4.x
+	 */
+	ncpus_probed = 0;
+	while (!cpu_find_by_instance(ncpus_probed, NULL, NULL))
+		ncpus_probed++;
+
 	for (i = 0; i < NR_CPUS; i++) {
 		if (cpu_possible(i)) {
 			struct cpu *p = kmalloc(sizeof(*p), GFP_KERNEL);
diff --git a/arch/sparc64/kernel/signal32.c b/arch/sparc64/kernel/signal32.c
index aecccd0df1d1..009a86e5ded4 100644
--- a/arch/sparc64/kernel/signal32.c
+++ b/arch/sparc64/kernel/signal32.c
@@ -863,6 +863,7 @@ static void new_setup_frame32(struct k_sigaction *ka, struct pt_regs *regs,
 		pud_t *pudp = pud_offset(pgdp, address);
 		pmd_t *pmdp = pmd_offset(pudp, address);
 		pte_t *ptep;
+		pte_t pte;
 
 		regs->u_regs[UREG_I7] = (unsigned long) (&(sf->insns[0]) - 2);
 	
@@ -873,9 +874,10 @@ static void new_setup_frame32(struct k_sigaction *ka, struct pt_regs *regs,
 
 		preempt_disable();
 		ptep = pte_offset_map(pmdp, address);
-		if (pte_present(*ptep)) {
+		pte = *ptep;
+		if (pte_present(pte)) {
 			unsigned long page = (unsigned long)
-				page_address(pte_page(*ptep));
+				page_address(pte_page(pte));
 
 			wmb();
 			__asm__ __volatile__("flush	%0 + %1"
diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index b4fc6a5462b2..6efc03df51c3 100644
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -39,7 +39,6 @@
 #include <asm/starfire.h>
 #include <asm/tlb.h>
 
-extern int linux_num_cpus;
 extern void calibrate_delay(void);
 
 /* Please don't make this stuff initdata!!!  --DaveM */
@@ -93,6 +92,27 @@ void __init smp_store_cpu_info(int id)
 	cpu_data(id).pte_cache[1]		= NULL;
 	cpu_data(id).pgd_cache			= NULL;
 	cpu_data(id).idle_volume		= 1;
+
+	cpu_data(id).dcache_size = prom_getintdefault(cpu_node, "dcache-size",
+						      16 * 1024);
+	cpu_data(id).dcache_line_size =
+		prom_getintdefault(cpu_node, "dcache-line-size", 32);
+	cpu_data(id).icache_size = prom_getintdefault(cpu_node, "icache-size",
+						      16 * 1024);
+	cpu_data(id).icache_line_size =
+		prom_getintdefault(cpu_node, "icache-line-size", 32);
+	cpu_data(id).ecache_size = prom_getintdefault(cpu_node, "ecache-size",
+						      4 * 1024 * 1024);
+	cpu_data(id).ecache_line_size =
+		prom_getintdefault(cpu_node, "ecache-line-size", 64);
+	printk("CPU[%d]: Caches "
+	       "D[sz(%d):line_sz(%d)] "
+	       "I[sz(%d):line_sz(%d)] "
+	       "E[sz(%d):line_sz(%d)]\n",
+	       id,
+	       cpu_data(id).dcache_size, cpu_data(id).dcache_line_size,
+	       cpu_data(id).icache_size, cpu_data(id).icache_line_size,
+	       cpu_data(id).ecache_size, cpu_data(id).ecache_line_size);
 }
 
 static void smp_setup_percpu_timer(void);
@@ -147,6 +167,9 @@ void __init smp_callin(void)
 		rmb();
 
 	cpu_set(cpuid, cpu_online_map);
+
+	/* idle thread is expected to have preempt disabled */
+	preempt_disable();
 }
 
 void cpu_panic(void)
@@ -818,43 +841,29 @@ void smp_flush_tlb_all(void)
  *    questionable (in theory the big win for threads is the massive sharing of
  *    address space state across processors).
  */
+
+/* This currently is only used by the hugetlb arch pre-fault
+ * hook on UltraSPARC-III+ and later when changing the pagesize
+ * bits of the context register for an address space.
+ */
 void smp_flush_tlb_mm(struct mm_struct *mm)
 {
-        /*
-         * This code is called from two places, dup_mmap and exit_mmap. In the
-         * former case, we really need a flush. In the later case, the callers
-         * are single threaded exec_mmap (really need a flush), multithreaded
-         * exec_mmap case (do not need to flush, since the caller gets a new
-         * context via activate_mm), and all other callers of mmput() whence
-         * the flush can be optimized since the associated threads are dead and
-         * the mm is being torn down (__exit_mm and other mmput callers) or the
-         * owning thread is dissociating itself from the mm. The
-         * (atomic_read(&mm->mm_users) == 0) check ensures real work is done
-         * for single thread exec and dup_mmap cases. An alternate check might
-         * have been (current->mm != mm).
-         *                                              Kanoj Sarcar
-         */
-        if (atomic_read(&mm->mm_users) == 0)
-                return;
-
-	{
-		u32 ctx = CTX_HWBITS(mm->context);
-		int cpu = get_cpu();
+	u32 ctx = CTX_HWBITS(mm->context);
+	int cpu = get_cpu();
 
-		if (atomic_read(&mm->mm_users) == 1) {
-			mm->cpu_vm_mask = cpumask_of_cpu(cpu);
-			goto local_flush_and_out;
-		}
+	if (atomic_read(&mm->mm_users) == 1) {
+		mm->cpu_vm_mask = cpumask_of_cpu(cpu);
+		goto local_flush_and_out;
+	}
 
-		smp_cross_call_masked(&xcall_flush_tlb_mm,
-				      ctx, 0, 0,
-				      mm->cpu_vm_mask);
+	smp_cross_call_masked(&xcall_flush_tlb_mm,
+			      ctx, 0, 0,
+			      mm->cpu_vm_mask);
 
-	local_flush_and_out:
-		__flush_tlb_mm(ctx, SECONDARY_CONTEXT);
+local_flush_and_out:
+	__flush_tlb_mm(ctx, SECONDARY_CONTEXT);
 
-		put_cpu();
-	}
+	put_cpu();
 }
 
 void smp_flush_tlb_pending(struct mm_struct *mm, unsigned long nr, unsigned long *vaddrs)
@@ -862,34 +871,13 @@ void smp_flush_tlb_pending(struct mm_struct *mm, unsigned long nr, unsigned long
 	u32 ctx = CTX_HWBITS(mm->context);
 	int cpu = get_cpu();
 
-	if (mm == current->active_mm && atomic_read(&mm->mm_users) == 1) {
+	if (mm == current->active_mm && atomic_read(&mm->mm_users) == 1)
 		mm->cpu_vm_mask = cpumask_of_cpu(cpu);
-		goto local_flush_and_out;
-	} else {
-		/* This optimization is not valid.  Normally
-		 * we will be holding the page_table_lock, but
-		 * there is an exception which is copy_page_range()
-		 * when forking.  The lock is held during the individual
-		 * page table updates in the parent, but not at the
-		 * top level, which is where we are invoked.
-		 */
-		if (0) {
-			cpumask_t this_cpu_mask = cpumask_of_cpu(cpu);
-
-			/* By virtue of running under the mm->page_table_lock,
-			 * and mmu_context.h:switch_mm doing the same, the
-			 * following operation is safe.
-			 */
-			if (cpus_equal(mm->cpu_vm_mask, this_cpu_mask))
-				goto local_flush_and_out;
-		}
-	}
-
-	smp_cross_call_masked(&xcall_flush_tlb_pending,
-			      ctx, nr, (unsigned long) vaddrs,
-			      mm->cpu_vm_mask);
+	else
+		smp_cross_call_masked(&xcall_flush_tlb_pending,
+				      ctx, nr, (unsigned long) vaddrs,
+				      mm->cpu_vm_mask);
 
-local_flush_and_out:
 	__flush_tlb_pending(ctx, nr, vaddrs);
 
 	put_cpu();
@@ -980,13 +968,6 @@ void smp_penguin_jailcell(int irq, struct pt_regs *regs)
 	preempt_enable();
 }
 
-extern unsigned long xcall_promstop;
-
-void smp_promstop_others(void)
-{
-	smp_cross_call(&xcall_promstop, 0, 0, 0);
-}
-
 #define prof_multiplier(__cpu)		cpu_data(__cpu).multiplier
 #define prof_counter(__cpu)		cpu_data(__cpu).counter
 
@@ -1170,20 +1151,9 @@ void __init smp_cpus_done(unsigned int max_cpus)
 	       (bogosum/(5000/HZ))%100);
 }
 
-/* This needn't do anything as we do not sleep the cpu
- * inside of the idler task, so an interrupt is not needed
- * to get a clean fast response.
- *
- * XXX Reverify this assumption... -DaveM
- *
- * Addendum: We do want it to do something for the signal
- *           delivery case, we detect that by just seeing
- *           if we are trying to send this to an idler or not.
- */
 void smp_send_reschedule(int cpu)
 {
-	if (cpu_data(cpu).idle_volume == 0)
-		smp_receive_signal(cpu);
+	smp_receive_signal(cpu);
 }
 
 /* This is a nop because we capture all other cpus
diff --git a/arch/sparc64/kernel/sunos_ioctl32.c b/arch/sparc64/kernel/sunos_ioctl32.c
index 7654b8a7f03a..3f619ead22cc 100644
--- a/arch/sparc64/kernel/sunos_ioctl32.c
+++ b/arch/sparc64/kernel/sunos_ioctl32.c
@@ -24,7 +24,6 @@
 #include <linux/smp_lock.h>
 #include <linux/syscalls.h>
 #include <linux/compat.h>
-#include <asm/kbio.h>
 
 #define SUNOS_NR_OPEN	256
 
diff --git a/arch/sparc64/kernel/sys32.S b/arch/sparc64/kernel/sys32.S
index 5f9e4fae612e..9cd272ac3ac1 100644
--- a/arch/sparc64/kernel/sys32.S
+++ b/arch/sparc64/kernel/sys32.S
@@ -157,173 +157,199 @@ sys32_socketcall:	/* %o0=call, %o1=args */
 	or		%g2, %lo(__socketcall_table_begin), %g2
 	jmpl		%g2 + %o0, %g0
 	 nop
+do_einval:
+	retl
+	 mov		-EINVAL, %o0
 
-	/* Each entry is exactly 32 bytes. */
 	.align		32
 __socketcall_table_begin:
+
+	/* Each entry is exactly 32 bytes. */
 do_sys_socket: /* sys_socket(int, int, int) */
-	ldswa		[%o1 + 0x0] %asi, %o0
+1:	ldswa		[%o1 + 0x0] %asi, %o0
 	sethi		%hi(sys_socket), %g1
-	ldswa		[%o1 + 0x8] %asi, %o2
+2:	ldswa		[%o1 + 0x8] %asi, %o2
 	jmpl		%g1 + %lo(sys_socket), %g0
-	 ldswa		[%o1 + 0x4] %asi, %o1
+3:	 ldswa		[%o1 + 0x4] %asi, %o1
 	nop
 	nop
 	nop
 do_sys_bind: /* sys_bind(int fd, struct sockaddr *, int) */
-	ldswa		[%o1 + 0x0] %asi, %o0
+4:	ldswa		[%o1 + 0x0] %asi, %o0
 	sethi		%hi(sys_bind), %g1
-	ldswa		[%o1 + 0x8] %asi, %o2
+5:	ldswa		[%o1 + 0x8] %asi, %o2
 	jmpl		%g1 + %lo(sys_bind), %g0
-	 lduwa		[%o1 + 0x4] %asi, %o1
+6:	 lduwa		[%o1 + 0x4] %asi, %o1
 	nop
 	nop
 	nop
 do_sys_connect: /* sys_connect(int, struct sockaddr *, int) */
-	ldswa		[%o1 + 0x0] %asi, %o0
+7:	ldswa		[%o1 + 0x0] %asi, %o0
 	sethi		%hi(sys_connect), %g1
-	ldswa		[%o1 + 0x8] %asi, %o2
+8:	ldswa		[%o1 + 0x8] %asi, %o2
 	jmpl		%g1 + %lo(sys_connect), %g0
-	 lduwa		[%o1 + 0x4] %asi, %o1
+9:	 lduwa		[%o1 + 0x4] %asi, %o1
 	nop
 	nop
 	nop
 do_sys_listen: /* sys_listen(int, int) */
-	ldswa		[%o1 + 0x0] %asi, %o0
+10:	ldswa		[%o1 + 0x0] %asi, %o0
 	sethi		%hi(sys_listen), %g1
 	jmpl		%g1 + %lo(sys_listen), %g0
-	 ldswa		[%o1 + 0x4] %asi, %o1
+11:	 ldswa		[%o1 + 0x4] %asi, %o1
 	nop
 	nop
 	nop
 	nop
 do_sys_accept: /* sys_accept(int, struct sockaddr *, int *) */
-	ldswa		[%o1 + 0x0] %asi, %o0
+12:	ldswa		[%o1 + 0x0] %asi, %o0
 	sethi		%hi(sys_accept), %g1
-	lduwa		[%o1 + 0x8] %asi, %o2
+13:	lduwa		[%o1 + 0x8] %asi, %o2
 	jmpl		%g1 + %lo(sys_accept), %g0
-	 lduwa		[%o1 + 0x4] %asi, %o1
+14:	 lduwa		[%o1 + 0x4] %asi, %o1
 	nop
 	nop
 	nop
 do_sys_getsockname: /* sys_getsockname(int, struct sockaddr *, int *) */
-	ldswa		[%o1 + 0x0] %asi, %o0
+15:	ldswa		[%o1 + 0x0] %asi, %o0
 	sethi		%hi(sys_getsockname), %g1
-	lduwa		[%o1 + 0x8] %asi, %o2
+16:	lduwa		[%o1 + 0x8] %asi, %o2
 	jmpl		%g1 + %lo(sys_getsockname), %g0
-	 lduwa		[%o1 + 0x4] %asi, %o1
+17:	 lduwa		[%o1 + 0x4] %asi, %o1
 	nop
 	nop
 	nop
 do_sys_getpeername: /* sys_getpeername(int, struct sockaddr *, int *) */
-	ldswa		[%o1 + 0x0] %asi, %o0
+18:	ldswa		[%o1 + 0x0] %asi, %o0
 	sethi		%hi(sys_getpeername), %g1
-	lduwa		[%o1 + 0x8] %asi, %o2
+19:	lduwa		[%o1 + 0x8] %asi, %o2
 	jmpl		%g1 + %lo(sys_getpeername), %g0
-	 lduwa		[%o1 + 0x4] %asi, %o1
+20:	 lduwa		[%o1 + 0x4] %asi, %o1
 	nop
 	nop
 	nop
 do_sys_socketpair: /* sys_socketpair(int, int, int, int *) */
-	ldswa		[%o1 + 0x0] %asi, %o0
+21:	ldswa		[%o1 + 0x0] %asi, %o0
 	sethi		%hi(sys_socketpair), %g1
-	ldswa		[%o1 + 0x8] %asi, %o2
-	lduwa		[%o1 + 0xc] %asi, %o3
+22:	ldswa		[%o1 + 0x8] %asi, %o2
+23:	lduwa		[%o1 + 0xc] %asi, %o3
 	jmpl		%g1 + %lo(sys_socketpair), %g0
-	 ldswa		[%o1 + 0x4] %asi, %o1
+24:	 ldswa		[%o1 + 0x4] %asi, %o1
 	nop
 	nop
 do_sys_send: /* sys_send(int, void *, size_t, unsigned int) */
-	ldswa		[%o1 + 0x0] %asi, %o0
+25:	ldswa		[%o1 + 0x0] %asi, %o0
 	sethi		%hi(sys_send), %g1
-	lduwa		[%o1 + 0x8] %asi, %o2
-	lduwa		[%o1 + 0xc] %asi, %o3
+26:	lduwa		[%o1 + 0x8] %asi, %o2
+27:	lduwa		[%o1 + 0xc] %asi, %o3
 	jmpl		%g1 + %lo(sys_send), %g0
-	 lduwa		[%o1 + 0x4] %asi, %o1
+28:	 lduwa		[%o1 + 0x4] %asi, %o1
 	nop
 	nop
 do_sys_recv: /* sys_recv(int, void *, size_t, unsigned int) */
-	ldswa		[%o1 + 0x0] %asi, %o0
+29:	ldswa		[%o1 + 0x0] %asi, %o0
 	sethi		%hi(sys_recv), %g1
-	lduwa		[%o1 + 0x8] %asi, %o2
-	lduwa		[%o1 + 0xc] %asi, %o3
+30:	lduwa		[%o1 + 0x8] %asi, %o2
+31:	lduwa		[%o1 + 0xc] %asi, %o3
 	jmpl		%g1 + %lo(sys_recv), %g0
-	 lduwa		[%o1 + 0x4] %asi, %o1
+32:	 lduwa		[%o1 + 0x4] %asi, %o1
 	nop
 	nop
 do_sys_sendto: /* sys_sendto(int, u32, compat_size_t, unsigned int, u32, int) */
-	ldswa		[%o1 + 0x0] %asi, %o0
+33:	ldswa		[%o1 + 0x0] %asi, %o0
 	sethi		%hi(sys_sendto), %g1
-	lduwa		[%o1 + 0x8] %asi, %o2
-	lduwa		[%o1 + 0xc] %asi, %o3
-	lduwa		[%o1 + 0x10] %asi, %o4
-	ldswa		[%o1 + 0x14] %asi, %o5
+34:	lduwa		[%o1 + 0x8] %asi, %o2
+35:	lduwa		[%o1 + 0xc] %asi, %o3
+36:	lduwa		[%o1 + 0x10] %asi, %o4
+37:	ldswa		[%o1 + 0x14] %asi, %o5
 	jmpl		%g1 + %lo(sys_sendto), %g0
-	 lduwa		[%o1 + 0x4] %asi, %o1
+38:	 lduwa		[%o1 + 0x4] %asi, %o1
 do_sys_recvfrom: /* sys_recvfrom(int, u32, compat_size_t, unsigned int, u32, u32) */
-	ldswa		[%o1 + 0x0] %asi, %o0
+39:	ldswa		[%o1 + 0x0] %asi, %o0
 	sethi		%hi(sys_recvfrom), %g1
-	lduwa		[%o1 + 0x8] %asi, %o2
-	lduwa		[%o1 + 0xc] %asi, %o3
-	lduwa		[%o1 + 0x10] %asi, %o4
-	lduwa		[%o1 + 0x14] %asi, %o5
+40:	lduwa		[%o1 + 0x8] %asi, %o2
+41:	lduwa		[%o1 + 0xc] %asi, %o3
+42:	lduwa		[%o1 + 0x10] %asi, %o4
+43:	lduwa		[%o1 + 0x14] %asi, %o5
 	jmpl		%g1 + %lo(sys_recvfrom), %g0
-	 lduwa		[%o1 + 0x4] %asi, %o1
+44:	 lduwa		[%o1 + 0x4] %asi, %o1
 do_sys_shutdown: /* sys_shutdown(int, int) */
-	ldswa		[%o1 + 0x0] %asi, %o0
+45:	ldswa		[%o1 + 0x0] %asi, %o0
 	sethi		%hi(sys_shutdown), %g1
 	jmpl		%g1 + %lo(sys_shutdown), %g0
-	 ldswa		[%o1 + 0x4] %asi, %o1
+46:	 ldswa		[%o1 + 0x4] %asi, %o1
 	nop
 	nop
 	nop
 	nop
 do_sys_setsockopt: /* compat_sys_setsockopt(int, int, int, char *, int) */
-	ldswa		[%o1 + 0x0] %asi, %o0
+47:	ldswa		[%o1 + 0x0] %asi, %o0
 	sethi		%hi(compat_sys_setsockopt), %g1
-	ldswa		[%o1 + 0x8] %asi, %o2
-	lduwa		[%o1 + 0xc] %asi, %o3
-	ldswa		[%o1 + 0x10] %asi, %o4
+48:	ldswa		[%o1 + 0x8] %asi, %o2
+49:	lduwa		[%o1 + 0xc] %asi, %o3
+50:	ldswa		[%o1 + 0x10] %asi, %o4
 	jmpl		%g1 + %lo(compat_sys_setsockopt), %g0
-	 ldswa		[%o1 + 0x4] %asi, %o1
+51:	 ldswa		[%o1 + 0x4] %asi, %o1
 	nop
 do_sys_getsockopt: /* compat_sys_getsockopt(int, int, int, u32, u32) */
-	ldswa		[%o1 + 0x0] %asi, %o0
+52:	ldswa		[%o1 + 0x0] %asi, %o0
 	sethi		%hi(compat_sys_getsockopt), %g1
-	ldswa		[%o1 + 0x8] %asi, %o2
-	lduwa		[%o1 + 0xc] %asi, %o3
-	lduwa		[%o1 + 0x10] %asi, %o4
+53:	ldswa		[%o1 + 0x8] %asi, %o2
+54:	lduwa		[%o1 + 0xc] %asi, %o3
+55:	lduwa		[%o1 + 0x10] %asi, %o4
 	jmpl		%g1 + %lo(compat_sys_getsockopt), %g0
-	 ldswa		[%o1 + 0x4] %asi, %o1
+56:	 ldswa		[%o1 + 0x4] %asi, %o1
 	nop
 do_sys_sendmsg: /* compat_sys_sendmsg(int, struct compat_msghdr *, unsigned int) */
-	ldswa		[%o1 + 0x0] %asi, %o0
+57:	ldswa		[%o1 + 0x0] %asi, %o0
 	sethi		%hi(compat_sys_sendmsg), %g1
-	lduwa		[%o1 + 0x8] %asi, %o2
+58:	lduwa		[%o1 + 0x8] %asi, %o2
 	jmpl		%g1 + %lo(compat_sys_sendmsg), %g0
-	 lduwa		[%o1 + 0x4] %asi, %o1
+59:	 lduwa		[%o1 + 0x4] %asi, %o1
 	nop
 	nop
 	nop
 do_sys_recvmsg: /* compat_sys_recvmsg(int, struct compat_msghdr *, unsigned int) */
-	ldswa		[%o1 + 0x0] %asi, %o0
+60:	ldswa		[%o1 + 0x0] %asi, %o0
 	sethi		%hi(compat_sys_recvmsg), %g1
-	lduwa		[%o1 + 0x8] %asi, %o2
+61:	lduwa		[%o1 + 0x8] %asi, %o2
 	jmpl		%g1 + %lo(compat_sys_recvmsg), %g0
-	 lduwa		[%o1 + 0x4] %asi, %o1
+62:	 lduwa		[%o1 + 0x4] %asi, %o1
 	nop
 	nop
 	nop
-__socketcall_table_end:
-
-do_einval:
-	retl
-	 mov		-EINVAL, %o0
-do_efault:
-	retl
-	 mov		-EFAULT, %o0
 
 	.section	__ex_table
 	.align		4
-	.word		__socketcall_table_begin, 0, __socketcall_table_end, do_efault
+	.word		1b, __retl_efault, 2b, __retl_efault
+	.word		3b, __retl_efault, 4b, __retl_efault
+	.word		5b, __retl_efault, 6b, __retl_efault
+	.word		7b, __retl_efault, 8b, __retl_efault
+	.word		9b, __retl_efault, 10b, __retl_efault
+	.word		11b, __retl_efault, 12b, __retl_efault
+	.word		13b, __retl_efault, 14b, __retl_efault
+	.word		15b, __retl_efault, 16b, __retl_efault
+	.word		17b, __retl_efault, 18b, __retl_efault
+	.word		19b, __retl_efault, 20b, __retl_efault
+	.word		21b, __retl_efault, 22b, __retl_efault
+	.word		23b, __retl_efault, 24b, __retl_efault
+	.word		25b, __retl_efault, 26b, __retl_efault
+	.word		27b, __retl_efault, 28b, __retl_efault
+	.word		29b, __retl_efault, 30b, __retl_efault
+	.word		31b, __retl_efault, 32b, __retl_efault
+	.word		33b, __retl_efault, 34b, __retl_efault
+	.word		35b, __retl_efault, 36b, __retl_efault
+	.word		37b, __retl_efault, 38b, __retl_efault
+	.word		39b, __retl_efault, 40b, __retl_efault
+	.word		41b, __retl_efault, 42b, __retl_efault
+	.word		43b, __retl_efault, 44b, __retl_efault
+	.word		45b, __retl_efault, 46b, __retl_efault
+	.word		47b, __retl_efault, 48b, __retl_efault
+	.word		49b, __retl_efault, 50b, __retl_efault
+	.word		51b, __retl_efault, 52b, __retl_efault
+	.word		53b, __retl_efault, 54b, __retl_efault
+	.word		55b, __retl_efault, 56b, __retl_efault
+	.word		57b, __retl_efault, 58b, __retl_efault
+	.word		59b, __retl_efault, 60b, __retl_efault
+	.word		61b, __retl_efault, 62b, __retl_efault
 	.previous
diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c
index 3f08a32f51a1..459c8fbe02b4 100644
--- a/arch/sparc64/kernel/time.c
+++ b/arch/sparc64/kernel/time.c
@@ -55,26 +55,11 @@ unsigned long ds1287_regs = 0UL;
 
 extern unsigned long wall_jiffies;
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 static void __iomem *mstk48t08_regs;
 static void __iomem *mstk48t59_regs;
 
 static int set_rtc_mmss(unsigned long);
 
-static __init unsigned long dummy_get_tick(void)
-{
-	return 0;
-}
-
-static __initdata struct sparc64_tick_ops dummy_tick_ops = {
-	.get_tick	= dummy_get_tick,
-};
-
-struct sparc64_tick_ops *tick_ops __read_mostly = &dummy_tick_ops;
-
 #define TICK_PRIV_BIT	(1UL << 63)
 
 #ifdef CONFIG_SMP
@@ -204,6 +189,8 @@ static struct sparc64_tick_ops tick_operations __read_mostly = {
 	.softint_mask	=	1UL << 0,
 };
 
+struct sparc64_tick_ops *tick_ops __read_mostly = &tick_operations;
+
 static void stick_init_tick(unsigned long offset)
 {
 	tick_disable_protection();
diff --git a/arch/sparc64/kernel/trampoline.S b/arch/sparc64/kernel/trampoline.S
index 3a145fc39cf2..9478551cb020 100644
--- a/arch/sparc64/kernel/trampoline.S
+++ b/arch/sparc64/kernel/trampoline.S
@@ -119,8 +119,8 @@ startup_continue:
 	sethi		%hi(itlb_load), %g2
 	or		%g2, %lo(itlb_load), %g2
 	stx		%g2, [%sp + 2047 + 128 + 0x18]
-	sethi		%hi(mmu_ihandle_cache), %g2
-	lduw		[%g2 + %lo(mmu_ihandle_cache)], %g2
+	sethi		%hi(prom_mmu_ihandle_cache), %g2
+	lduw		[%g2 + %lo(prom_mmu_ihandle_cache)], %g2
 	stx		%g2, [%sp + 2047 + 128 + 0x20]
 	sethi		%hi(KERNBASE), %g2
 	stx		%g2, [%sp + 2047 + 128 + 0x28]
@@ -156,8 +156,8 @@ startup_continue:
 	sethi		%hi(itlb_load), %g2
 	or		%g2, %lo(itlb_load), %g2
 	stx		%g2, [%sp + 2047 + 128 + 0x18]
-	sethi		%hi(mmu_ihandle_cache), %g2
-	lduw		[%g2 + %lo(mmu_ihandle_cache)], %g2
+	sethi		%hi(prom_mmu_ihandle_cache), %g2
+	lduw		[%g2 + %lo(prom_mmu_ihandle_cache)], %g2
 	stx		%g2, [%sp + 2047 + 128 + 0x20]
 	sethi		%hi(KERNBASE + 0x400000), %g2
 	stx		%g2, [%sp + 2047 + 128 + 0x28]
@@ -190,8 +190,8 @@ do_dtlb:
 	sethi		%hi(dtlb_load), %g2
 	or		%g2, %lo(dtlb_load), %g2
 	stx		%g2, [%sp + 2047 + 128 + 0x18]
-	sethi		%hi(mmu_ihandle_cache), %g2
-	lduw		[%g2 + %lo(mmu_ihandle_cache)], %g2
+	sethi		%hi(prom_mmu_ihandle_cache), %g2
+	lduw		[%g2 + %lo(prom_mmu_ihandle_cache)], %g2
 	stx		%g2, [%sp + 2047 + 128 + 0x20]
 	sethi		%hi(KERNBASE), %g2
 	stx		%g2, [%sp + 2047 + 128 + 0x28]
@@ -228,8 +228,8 @@ do_dtlb:
 	sethi		%hi(dtlb_load), %g2
 	or		%g2, %lo(dtlb_load), %g2
 	stx		%g2, [%sp + 2047 + 128 + 0x18]
-	sethi		%hi(mmu_ihandle_cache), %g2
-	lduw		[%g2 + %lo(mmu_ihandle_cache)], %g2
+	sethi		%hi(prom_mmu_ihandle_cache), %g2
+	lduw		[%g2 + %lo(prom_mmu_ihandle_cache)], %g2
 	stx		%g2, [%sp + 2047 + 128 + 0x20]
 	sethi		%hi(KERNBASE + 0x400000), %g2
 	stx		%g2, [%sp + 2047 + 128 + 0x28]
@@ -336,20 +336,13 @@ do_unlock:
 	call		init_irqwork_curcpu
 	 nop
 
-	BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g2,g3,1f)
-	ba,pt	%xcc, 2f
-	 nop
-
-1:	/* Start using proper page size encodings in ctx register.  */
-	sethi	%uhi(CTX_CHEETAH_PLUS_NUC), %g3
+	/* Start using proper page size encodings in ctx register.  */
+	sethi	%hi(sparc64_kern_pri_context), %g3
+	ldx	[%g3 + %lo(sparc64_kern_pri_context)], %g2
 	mov	PRIMARY_CONTEXT, %g1
-	sllx	%g3, 32, %g3
-	sethi	%hi(CTX_CHEETAH_PLUS_CTX0), %g2
-	or	%g3, %g2, %g3
-	stxa	%g3, [%g1] ASI_DMMU
+	stxa	%g2, [%g1] ASI_DMMU
 	membar	#Sync
 
-2:
 	rdpr		%pstate, %o1
 	or		%o1, PSTATE_IE, %o1
 	wrpr		%o1, 0, %pstate
diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c
index b280b2ef674f..5570e7bb22bb 100644
--- a/arch/sparc64/kernel/traps.c
+++ b/arch/sparc64/kernel/traps.c
@@ -189,19 +189,18 @@ void spitfire_data_access_exception(struct pt_regs *regs, unsigned long sfsr, un
 
 	if (regs->tstate & TSTATE_PRIV) {
 		/* Test if this comes from uaccess places. */
-		unsigned long fixup;
-		unsigned long g2 = regs->u_regs[UREG_G2];
+		const struct exception_table_entry *entry;
 
-		if ((fixup = search_extables_range(regs->tpc, &g2))) {
-			/* Ouch, somebody is trying ugly VM hole tricks on us... */
+		entry = search_exception_tables(regs->tpc);
+		if (entry) {
+			/* Ouch, somebody is trying VM hole tricks on us... */
 #ifdef DEBUG_EXCEPTIONS
 			printk("Exception: PC<%016lx> faddr<UNKNOWN>\n", regs->tpc);
-			printk("EX_TABLE: insn<%016lx> fixup<%016lx> "
-			       "g2<%016lx>\n", regs->tpc, fixup, g2);
+			printk("EX_TABLE: insn<%016lx> fixup<%016lx>\n",
+			       regs->tpc, entry->fixup);
 #endif
-			regs->tpc = fixup;
+			regs->tpc = entry->fixup;
 			regs->tnpc = regs->tpc + 4;
-			regs->u_regs[UREG_G2] = g2;
 			return;
 		}
 		/* Shit... */
@@ -758,26 +757,12 @@ void __init cheetah_ecache_flush_init(void)
 	ecache_flush_size = (2 * largest_size);
 	ecache_flush_linesize = smallest_linesize;
 
-	/* Discover a physically contiguous chunk of physical
-	 * memory in 'sp_banks' of size ecache_flush_size calculated
-	 * above.  Store the physical base of this area at
-	 * ecache_flush_physbase.
-	 */
-	for (node = 0; ; node++) {
-		if (sp_banks[node].num_bytes == 0)
-			break;
-		if (sp_banks[node].num_bytes >= ecache_flush_size) {
-			ecache_flush_physbase = sp_banks[node].base_addr;
-			break;
-		}
-	}
+	ecache_flush_physbase = find_ecache_flush_span(ecache_flush_size);
 
-	/* Note: Zero would be a valid value of ecache_flush_physbase so
-	 * don't use that as the success test. :-)
-	 */
-	if (sp_banks[node].num_bytes == 0) {
+	if (ecache_flush_physbase == ~0UL) {
 		prom_printf("cheetah_ecache_flush_init: Cannot find %d byte "
-			    "contiguous physical memory.\n", ecache_flush_size);
+			    "contiguous physical memory.\n",
+			    ecache_flush_size);
 		prom_halt();
 	}
 
@@ -869,14 +854,19 @@ static void cheetah_flush_ecache_line(unsigned long physaddr)
  */
 static void __cheetah_flush_icache(void)
 {
-	unsigned long i;
+	unsigned int icache_size, icache_line_size;
+	unsigned long addr;
+
+	icache_size = local_cpu_data().icache_size;
+	icache_line_size = local_cpu_data().icache_line_size;
 
 	/* Clear the valid bits in all the tags. */
-	for (i = 0; i < (1 << 15); i += (1 << 5)) {
+	for (addr = 0; addr < icache_size; addr += icache_line_size) {
 		__asm__ __volatile__("stxa %%g0, [%0] %1\n\t"
 				     "membar #Sync"
 				     : /* no outputs */
-				     : "r" (i | (2 << 3)), "i" (ASI_IC_TAG));
+				     : "r" (addr | (2 << 3)),
+				       "i" (ASI_IC_TAG));
 	}
 }
 
@@ -904,13 +894,17 @@ static void cheetah_flush_icache(void)
 
 static void cheetah_flush_dcache(void)
 {
-	unsigned long i;
+	unsigned int dcache_size, dcache_line_size;
+	unsigned long addr;
 
-	for (i = 0; i < (1 << 16); i += (1 << 5)) {
+	dcache_size = local_cpu_data().dcache_size;
+	dcache_line_size = local_cpu_data().dcache_line_size;
+
+	for (addr = 0; addr < dcache_size; addr += dcache_line_size) {
 		__asm__ __volatile__("stxa %%g0, [%0] %1\n\t"
 				     "membar #Sync"
 				     : /* no outputs */
-				     : "r" (i), "i" (ASI_DCACHE_TAG));
+				     : "r" (addr), "i" (ASI_DCACHE_TAG));
 	}
 }
 
@@ -921,24 +915,29 @@ static void cheetah_flush_dcache(void)
  */
 static void cheetah_plus_zap_dcache_parity(void)
 {
-	unsigned long i;
+	unsigned int dcache_size, dcache_line_size;
+	unsigned long addr;
+
+	dcache_size = local_cpu_data().dcache_size;
+	dcache_line_size = local_cpu_data().dcache_line_size;
 
-	for (i = 0; i < (1 << 16); i += (1 << 5)) {
-		unsigned long tag = (i >> 14);
-		unsigned long j;
+	for (addr = 0; addr < dcache_size; addr += dcache_line_size) {
+		unsigned long tag = (addr >> 14);
+		unsigned long line;
 
 		__asm__ __volatile__("membar	#Sync\n\t"
 				     "stxa	%0, [%1] %2\n\t"
 				     "membar	#Sync"
 				     : /* no outputs */
-				     : "r" (tag), "r" (i),
+				     : "r" (tag), "r" (addr),
 				       "i" (ASI_DCACHE_UTAG));
-		for (j = i; j < i + (1 << 5); j += (1 << 3))
+		for (line = addr; line < addr + dcache_line_size; line += 8)
 			__asm__ __volatile__("membar	#Sync\n\t"
 					     "stxa	%%g0, [%0] %1\n\t"
 					     "membar	#Sync"
 					     : /* no outputs */
-					     : "r" (j), "i" (ASI_DCACHE_DATA));
+					     : "r" (line),
+					       "i" (ASI_DCACHE_DATA));
 	}
 }
 
@@ -1332,16 +1331,12 @@ static int cheetah_fix_ce(unsigned long physaddr)
 /* Return non-zero if PADDR is a valid physical memory address. */
 static int cheetah_check_main_memory(unsigned long paddr)
 {
-	int i;
+	unsigned long vaddr = PAGE_OFFSET + paddr;
 
-	for (i = 0; ; i++) {
-		if (sp_banks[i].num_bytes == 0)
-			break;
-		if (paddr >= sp_banks[i].base_addr &&
-		    paddr < (sp_banks[i].base_addr + sp_banks[i].num_bytes))
-			return 1;
-	}
-	return 0;
+	if (vaddr > (unsigned long) high_memory)
+		return 0;
+
+	return kern_addr_valid(vaddr);
 }
 
 void cheetah_cee_handler(struct pt_regs *regs, unsigned long afsr, unsigned long afar)
@@ -1596,10 +1591,10 @@ void cheetah_deferred_handler(struct pt_regs *regs, unsigned long afsr, unsigned
 			/* OK, usermode access. */
 			recoverable = 1;
 		} else {
-			unsigned long g2 = regs->u_regs[UREG_G2];
-			unsigned long fixup = search_extables_range(regs->tpc, &g2);
+			const struct exception_table_entry *entry;
 
-			if (fixup != 0UL) {
+			entry = search_exception_tables(regs->tpc);
+			if (entry) {
 				/* OK, kernel access to userspace. */
 				recoverable = 1;
 
@@ -1618,9 +1613,8 @@ void cheetah_deferred_handler(struct pt_regs *regs, unsigned long afsr, unsigned
 				 * recoverable condition.
 				 */
 				if (recoverable) {
-					regs->tpc = fixup;
+					regs->tpc = entry->fixup;
 					regs->tnpc = regs->tpc + 4;
-					regs->u_regs[UREG_G2] = g2;
 				}
 			}
 		}
diff --git a/arch/sparc64/kernel/una_asm.S b/arch/sparc64/kernel/una_asm.S
index da48400bcc95..1f5b5b708ce7 100644
--- a/arch/sparc64/kernel/una_asm.S
+++ b/arch/sparc64/kernel/una_asm.S
@@ -6,13 +6,6 @@
 
 	.text
 
-kernel_unaligned_trap_fault:
-	call	kernel_mna_trap_fault
-	 nop
-	retl
-	 nop
-	.size	kern_unaligned_trap_fault, .-kern_unaligned_trap_fault
-
 	.globl	__do_int_store
 __do_int_store:
 	rd	%asi, %o4
@@ -51,24 +44,24 @@ __do_int_store:
 0:
 	wr	%o4, 0x0, %asi
 	retl
-	 nop
+	 mov	0, %o0
 	.size	__do_int_store, .-__do_int_store
 
 	.section	__ex_table
-	.word		4b, kernel_unaligned_trap_fault
-	.word		5b, kernel_unaligned_trap_fault
-	.word		6b, kernel_unaligned_trap_fault
-	.word		7b, kernel_unaligned_trap_fault
-	.word		8b, kernel_unaligned_trap_fault
-	.word		9b, kernel_unaligned_trap_fault
-	.word		10b, kernel_unaligned_trap_fault
-	.word		11b, kernel_unaligned_trap_fault
-	.word		12b, kernel_unaligned_trap_fault
-	.word		13b, kernel_unaligned_trap_fault
-	.word		14b, kernel_unaligned_trap_fault
-	.word		15b, kernel_unaligned_trap_fault
-	.word		16b, kernel_unaligned_trap_fault
-	.word		17b, kernel_unaligned_trap_fault
+	.word		4b, __retl_efault
+	.word		5b, __retl_efault
+	.word		6b, __retl_efault
+	.word		7b, __retl_efault
+	.word		8b, __retl_efault
+	.word		9b, __retl_efault
+	.word		10b, __retl_efault
+	.word		11b, __retl_efault
+	.word		12b, __retl_efault
+	.word		13b, __retl_efault
+	.word		14b, __retl_efault
+	.word		15b, __retl_efault
+	.word		16b, __retl_efault
+	.word		17b, __retl_efault
 	.previous
 
 	.globl	do_int_load
@@ -133,21 +126,21 @@ do_int_load:
 0:
 	wr	%o5, 0x0, %asi
 	retl
-	 nop
+	 mov	0, %o0
 	.size	__do_int_load, .-__do_int_load
 
 	.section	__ex_table
-	.word		4b, kernel_unaligned_trap_fault
-	.word		5b, kernel_unaligned_trap_fault
-	.word		6b, kernel_unaligned_trap_fault
-	.word		7b, kernel_unaligned_trap_fault
-	.word		8b, kernel_unaligned_trap_fault
-	.word		9b, kernel_unaligned_trap_fault
-	.word		10b, kernel_unaligned_trap_fault
-	.word		11b, kernel_unaligned_trap_fault
-	.word		12b, kernel_unaligned_trap_fault
-	.word		13b, kernel_unaligned_trap_fault
-	.word		14b, kernel_unaligned_trap_fault
-	.word		15b, kernel_unaligned_trap_fault
-	.word		16b, kernel_unaligned_trap_fault
+	.word		4b, __retl_efault
+	.word		5b, __retl_efault
+	.word		6b, __retl_efault
+	.word		7b, __retl_efault
+	.word		8b, __retl_efault
+	.word		9b, __retl_efault
+	.word		10b, __retl_efault
+	.word		11b, __retl_efault
+	.word		12b, __retl_efault
+	.word		13b, __retl_efault
+	.word		14b, __retl_efault
+	.word		15b, __retl_efault
+	.word		16b, __retl_efault
 	.previous
diff --git a/arch/sparc64/kernel/unaligned.c b/arch/sparc64/kernel/unaligned.c
index 42718f6a7d36..70faf630603b 100644
--- a/arch/sparc64/kernel/unaligned.c
+++ b/arch/sparc64/kernel/unaligned.c
@@ -180,14 +180,14 @@ static void __attribute_used__ unaligned_panic(char *str, struct pt_regs *regs)
 	die_if_kernel(str, regs);
 }
 
-extern void do_int_load(unsigned long *dest_reg, int size,
-			unsigned long *saddr, int is_signed, int asi);
+extern int do_int_load(unsigned long *dest_reg, int size,
+		       unsigned long *saddr, int is_signed, int asi);
 	
-extern void __do_int_store(unsigned long *dst_addr, int size,
-			   unsigned long src_val, int asi);
+extern int __do_int_store(unsigned long *dst_addr, int size,
+			  unsigned long src_val, int asi);
 
-static inline void do_int_store(int reg_num, int size, unsigned long *dst_addr,
-				struct pt_regs *regs, int asi, int orig_asi)
+static inline int do_int_store(int reg_num, int size, unsigned long *dst_addr,
+			       struct pt_regs *regs, int asi, int orig_asi)
 {
 	unsigned long zero = 0;
 	unsigned long *src_val_p = &zero;
@@ -219,7 +219,7 @@ static inline void do_int_store(int reg_num, int size, unsigned long *dst_addr,
 			break;
 		};
 	}
-	__do_int_store(dst_addr, size, src_val, asi);
+	return __do_int_store(dst_addr, size, src_val, asi);
 }
 
 static inline void advance(struct pt_regs *regs)
@@ -242,14 +242,14 @@ static inline int ok_for_kernel(unsigned int insn)
 	return !floating_point_load_or_store_p(insn);
 }
 
-void kernel_mna_trap_fault(void)
+static void kernel_mna_trap_fault(void)
 {
 	struct pt_regs *regs = current_thread_info()->kern_una_regs;
 	unsigned int insn = current_thread_info()->kern_una_insn;
-	unsigned long g2 = regs->u_regs[UREG_G2];
-	unsigned long fixup = search_extables_range(regs->tpc, &g2);
+	const struct exception_table_entry *entry;
 
-	if (!fixup) {
+	entry = search_exception_tables(regs->tpc);
+	if (!entry) {
 		unsigned long address;
 
 		address = compute_effective_address(regs, insn,
@@ -270,9 +270,8 @@ void kernel_mna_trap_fault(void)
 	        die_if_kernel("Oops", regs);
 		/* Not reached */
 	}
-	regs->tpc = fixup;
+	regs->tpc = entry->fixup;
 	regs->tnpc = regs->tpc + 4;
-	regs->u_regs [UREG_G2] = g2;
 
 	regs->tstate &= ~TSTATE_ASI;
 	regs->tstate |= (ASI_AIUS << 24UL);
@@ -294,8 +293,8 @@ asmlinkage void kernel_unaligned_trap(struct pt_regs *regs, unsigned int insn, u
 
 		kernel_mna_trap_fault();
 	} else {
-		unsigned long addr;
-		int orig_asi, asi;
+		unsigned long addr, *reg_addr;
+		int orig_asi, asi, err;
 
 		addr = compute_effective_address(regs, insn,
 						 ((insn >> 25) & 0x1f));
@@ -319,11 +318,12 @@ asmlinkage void kernel_unaligned_trap(struct pt_regs *regs, unsigned int insn, u
 		};
 		switch (dir) {
 		case load:
-			do_int_load(fetch_reg_addr(((insn>>25)&0x1f), regs),
-				    size, (unsigned long *) addr,
-				    decode_signedness(insn), asi);
-			if (unlikely(asi != orig_asi)) {
-				unsigned long val_in = *(unsigned long *) addr;
+			reg_addr = fetch_reg_addr(((insn>>25)&0x1f), regs);
+			err = do_int_load(reg_addr, size,
+					  (unsigned long *) addr,
+					  decode_signedness(insn), asi);
+			if (likely(!err) && unlikely(asi != orig_asi)) {
+				unsigned long val_in = *reg_addr;
 				switch (size) {
 				case 2:
 					val_in = swab16(val_in);
@@ -339,21 +339,24 @@ asmlinkage void kernel_unaligned_trap(struct pt_regs *regs, unsigned int insn, u
 					BUG();
 					break;
 				};
-				*(unsigned long *) addr = val_in;
+				*reg_addr = val_in;
 			}
 			break;
 
 		case store:
-			do_int_store(((insn>>25)&0x1f), size,
-				     (unsigned long *) addr, regs,
-				     asi, orig_asi);
+			err = do_int_store(((insn>>25)&0x1f), size,
+					   (unsigned long *) addr, regs,
+					   asi, orig_asi);
 			break;
 
 		default:
 			panic("Impossible kernel unaligned trap.");
 			/* Not reached... */
 		}
-		advance(regs);
+		if (unlikely(err))
+			kernel_mna_trap_fault();
+		else
+			advance(regs);
 	}
 }
 
diff --git a/arch/sparc64/kernel/us2e_cpufreq.c b/arch/sparc64/kernel/us2e_cpufreq.c
index 686e526bec04..b35dc8dc995a 100644
--- a/arch/sparc64/kernel/us2e_cpufreq.c
+++ b/arch/sparc64/kernel/us2e_cpufreq.c
@@ -388,10 +388,8 @@ err_out:
 			kfree(driver);
 			cpufreq_us2e_driver = NULL;
 		}
-		if (us2e_freq_table) {
-			kfree(us2e_freq_table);
-			us2e_freq_table = NULL;
-		}
+		kfree(us2e_freq_table);
+		us2e_freq_table = NULL;
 		return ret;
 	}
 
@@ -402,7 +400,6 @@ static void __exit us2e_freq_exit(void)
 {
 	if (cpufreq_us2e_driver) {
 		cpufreq_unregister_driver(cpufreq_us2e_driver);
-
 		kfree(cpufreq_us2e_driver);
 		cpufreq_us2e_driver = NULL;
 		kfree(us2e_freq_table);
diff --git a/arch/sparc64/kernel/us3_cpufreq.c b/arch/sparc64/kernel/us3_cpufreq.c
index 9080e7cd4bb0..6d1f9a3c464f 100644
--- a/arch/sparc64/kernel/us3_cpufreq.c
+++ b/arch/sparc64/kernel/us3_cpufreq.c
@@ -208,7 +208,10 @@ static int __init us3_freq_init(void)
 	impl  = ((ver >> 32) & 0xffff);
 
 	if (manuf == CHEETAH_MANUF &&
-	    (impl == CHEETAH_IMPL || impl == CHEETAH_PLUS_IMPL)) {
+	    (impl == CHEETAH_IMPL ||
+	     impl == CHEETAH_PLUS_IMPL ||
+	     impl == JAGUAR_IMPL ||
+	     impl == PANTHER_IMPL)) {
 		struct cpufreq_driver *driver;
 
 		ret = -ENOMEM;
@@ -246,10 +249,8 @@ err_out:
 			kfree(driver);
 			cpufreq_us3_driver = NULL;
 		}
-		if (us3_freq_table) {
-			kfree(us3_freq_table);
-			us3_freq_table = NULL;
-		}
+		kfree(us3_freq_table);
+		us3_freq_table = NULL;
 		return ret;
 	}
 
@@ -260,7 +261,6 @@ static void __exit us3_freq_exit(void)
 {
 	if (cpufreq_us3_driver) {
 		cpufreq_unregister_driver(cpufreq_us3_driver);
-
 		kfree(cpufreq_us3_driver);
 		cpufreq_us3_driver = NULL;
 		kfree(us3_freq_table);
diff --git a/arch/sparc64/kernel/vmlinux.lds.S b/arch/sparc64/kernel/vmlinux.lds.S
index f47d0be39378..2af0cf0a8640 100644
--- a/arch/sparc64/kernel/vmlinux.lds.S
+++ b/arch/sparc64/kernel/vmlinux.lds.S
@@ -9,8 +9,7 @@ ENTRY(_start)
 jiffies = jiffies_64;
 SECTIONS
 {
-  swapper_pmd_dir = 0x0000000000402000;
-  empty_pg_dir = 0x0000000000403000;
+  swapper_low_pmd_dir = 0x0000000000402000;
   . = 0x4000;
   .text 0x0000000000404000 :
   {
diff --git a/arch/sparc64/kernel/winfixup.S b/arch/sparc64/kernel/winfixup.S
index 99c809a1e5ac..39160926267b 100644
--- a/arch/sparc64/kernel/winfixup.S
+++ b/arch/sparc64/kernel/winfixup.S
@@ -16,23 +16,14 @@
 	.text
 
 set_pcontext:
-cplus_winfixup_insn_1:
-	sethi	%hi(0), %l1
+	sethi	%hi(sparc64_kern_pri_context), %l1
+	ldx	[%l1 + %lo(sparc64_kern_pri_context)], %l1
 	mov	PRIMARY_CONTEXT, %g1
-	sllx	%l1, 32, %l1
-cplus_winfixup_insn_2:
-	sethi	%hi(0), %g2
-	or	%l1, %g2, %l1
 	stxa	%l1, [%g1] ASI_DMMU
 	flush	%g6
 	retl
 	 nop
 
-cplus_wfinsn_1:
-	sethi	%uhi(CTX_CHEETAH_PLUS_NUC), %l1
-cplus_wfinsn_2:
-	sethi	%hi(CTX_CHEETAH_PLUS_CTX0), %g2
-
 	.align	32
 
 	/* Here are the rules, pay attention.
@@ -395,23 +386,3 @@ window_dax_from_user_common:
 	 add		%sp, PTREGS_OFF, %o0
 	ba,pt		%xcc, rtrap
 	 clr		%l6
-	
-
-	.globl		cheetah_plus_patch_winfixup
-cheetah_plus_patch_winfixup:
-	sethi			%hi(cplus_wfinsn_1), %o0
-	sethi			%hi(cplus_winfixup_insn_1), %o2
-	lduw			[%o0 + %lo(cplus_wfinsn_1)], %o1
-	or			%o2, %lo(cplus_winfixup_insn_1), %o2
-	stw			%o1, [%o2]
-	flush			%o2
-
-	sethi			%hi(cplus_wfinsn_2), %o0
-	sethi			%hi(cplus_winfixup_insn_2), %o2
-	lduw			[%o0 + %lo(cplus_wfinsn_2)], %o1
-	or			%o2, %lo(cplus_winfixup_insn_2), %o2
-	stw			%o1, [%o2]
-	flush			%o2
-
-	retl
-	 nop
diff --git a/arch/sparc64/lib/VISsave.S b/arch/sparc64/lib/VISsave.S
index 4e18989bd602..a0ded5c5aa5c 100644
--- a/arch/sparc64/lib/VISsave.S
+++ b/arch/sparc64/lib/VISsave.S
@@ -59,15 +59,17 @@ vis1:	ldub		[%g6 + TI_FPSAVED], %g3
 	be,pn		%icc, 9b
 	 add		%g6, TI_FPREGS, %g2
 	andcc		%o5, FPRS_DL, %g0
-	membar		#StoreStore | #LoadStore
 
 	be,pn		%icc, 4f
 	 add		%g6, TI_FPREGS+0x40, %g3
+	membar		#Sync
 	stda		%f0, [%g2 + %g1] ASI_BLK_P
 	stda		%f16, [%g3 + %g1] ASI_BLK_P
+	membar		#Sync
 	andcc		%o5, FPRS_DU, %g0
 	be,pn		%icc, 5f
 4:	 add		%g1, 128, %g1
+	membar		#Sync
 	stda		%f32, [%g2 + %g1] ASI_BLK_P
 
 	stda		%f48, [%g3 + %g1] ASI_BLK_P
@@ -87,7 +89,7 @@ vis1:	ldub		[%g6 + TI_FPSAVED], %g3
 	sll		%g1, 5, %g1
 	add		%g6, TI_FPREGS+0xc0, %g3
 	wr		%g0, FPRS_FEF, %fprs
-	membar		#StoreStore | #LoadStore
+	membar		#Sync
 	stda		%f32, [%g2 + %g1] ASI_BLK_P
 	stda		%f48, [%g3 + %g1] ASI_BLK_P
 	membar		#Sync
@@ -128,8 +130,8 @@ VISenterhalf:
 	be,pn		%icc, 4f
 	 add		%g6, TI_FPREGS, %g2
 
-	membar		#StoreStore | #LoadStore
 	add		%g6, TI_FPREGS+0x40, %g3
+	membar		#Sync
 	stda		%f0, [%g2 + %g1] ASI_BLK_P
 	stda		%f16, [%g3 + %g1] ASI_BLK_P
 	membar		#Sync
diff --git a/arch/sparc64/lib/strncpy_from_user.S b/arch/sparc64/lib/strncpy_from_user.S
index 09cbbaa0ebf4..e1264650ca7a 100644
--- a/arch/sparc64/lib/strncpy_from_user.S
+++ b/arch/sparc64/lib/strncpy_from_user.S
@@ -125,15 +125,11 @@ __strncpy_from_user:
 	 add	%o2, %o3, %o0
 	.size	__strncpy_from_user, .-__strncpy_from_user
 
-	.section .fixup,#alloc,#execinstr
-	.align	4
-4:	retl
-	 mov	-EFAULT, %o0
-
 	.section __ex_table,#alloc
 	.align	4
-	.word	60b, 4b
-	.word	61b, 4b
-	.word	62b, 4b
-	.word	63b, 4b
-	.word	64b, 4b
+	.word	60b, __retl_efault
+	.word	61b, __retl_efault
+	.word	62b, __retl_efault
+	.word	63b, __retl_efault
+	.word	64b, __retl_efault
+	.previous
diff --git a/arch/sparc64/lib/user_fixup.c b/arch/sparc64/lib/user_fixup.c
index 0278e34125db..19d1fdb17d0e 100644
--- a/arch/sparc64/lib/user_fixup.c
+++ b/arch/sparc64/lib/user_fixup.c
@@ -11,61 +11,56 @@
 
 /* Calculating the exact fault address when using
  * block loads and stores can be very complicated.
+ *
  * Instead of trying to be clever and handling all
  * of the cases, just fix things up simply here.
  */
 
-unsigned long copy_from_user_fixup(void *to, const void __user *from, unsigned long size)
+static unsigned long compute_size(unsigned long start, unsigned long size, unsigned long *offset)
 {
-	char *dst = to;
-	const char __user *src = from;
+	unsigned long fault_addr = current_thread_info()->fault_address;
+	unsigned long end = start + size;
 
-	while (size) {
-		if (__get_user(*dst, src))
-			break;
-		dst++;
-		src++;
-		size--;
+	if (fault_addr < start || fault_addr >= end) {
+		*offset = 0;
+	} else {
+		*offset = start - fault_addr;
+		size = end - fault_addr;
 	}
+	return size;
+}
 
-	if (size)
-		memset(dst, 0, size);
+unsigned long copy_from_user_fixup(void *to, const void __user *from, unsigned long size)
+{
+	unsigned long offset;
+
+	size = compute_size((unsigned long) from, size, &offset);
+	if (likely(size))
+		memset(to + offset, 0, size);
 
 	return size;
 }
 
 unsigned long copy_to_user_fixup(void __user *to, const void *from, unsigned long size)
 {
-	char __user *dst = to;
-	const char *src = from;
-
-	while (size) {
-		if (__put_user(*src, dst))
-			break;
-		dst++;
-		src++;
-		size--;
-	}
+	unsigned long offset;
 
-	return size;
+	return compute_size((unsigned long) to, size, &offset);
 }
 
 unsigned long copy_in_user_fixup(void __user *to, void __user *from, unsigned long size)
 {
-	char __user *dst = to;
-	char __user *src = from;
+	unsigned long fault_addr = current_thread_info()->fault_address;
+	unsigned long start = (unsigned long) to;
+	unsigned long end = start + size;
 
-	while (size) {
-		char tmp;
+	if (fault_addr >= start && fault_addr < end)
+		return end - fault_addr;
 
-		if (__get_user(tmp, src))
-			break;
-		if (__put_user(tmp, dst))
-			break;
-		dst++;
-		src++;
-		size--;
-	}
+	start = (unsigned long) from;
+	end = start + size;
+	if (fault_addr >= start && fault_addr < end)
+		return end - fault_addr;
 
 	return size;
 }
diff --git a/arch/sparc64/mm/Makefile b/arch/sparc64/mm/Makefile
index cda87333a77b..9d0960e69f48 100644
--- a/arch/sparc64/mm/Makefile
+++ b/arch/sparc64/mm/Makefile
@@ -5,6 +5,6 @@
 EXTRA_AFLAGS := -ansi
 EXTRA_CFLAGS := -Werror
 
-obj-y    := ultra.o tlb.o fault.o init.o generic.o extable.o
+obj-y    := ultra.o tlb.o fault.o init.o generic.o
 
 obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
diff --git a/arch/sparc64/mm/extable.c b/arch/sparc64/mm/extable.c
deleted file mode 100644
index ec334297ff4f..000000000000
--- a/arch/sparc64/mm/extable.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * linux/arch/sparc64/mm/extable.c
- */
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <asm/uaccess.h>
-
-extern const struct exception_table_entry __start___ex_table[];
-extern const struct exception_table_entry __stop___ex_table[];
-
-void sort_extable(struct exception_table_entry *start,
-		  struct exception_table_entry *finish)
-{
-}
-
-/* Caller knows they are in a range if ret->fixup == 0 */
-const struct exception_table_entry *
-search_extable(const struct exception_table_entry *start,
-	       const struct exception_table_entry *last,
-	       unsigned long value)
-{
-	const struct exception_table_entry *walk;
-
-	/* Single insn entries are encoded as:
-	 *	word 1:	insn address
-	 *	word 2:	fixup code address
-	 *
-	 * Range entries are encoded as:
-	 *	word 1: first insn address
-	 *	word 2: 0
-	 *	word 3: last insn address + 4 bytes
-	 *	word 4: fixup code address
-	 *
-	 * See asm/uaccess.h for more details.
-	 */
-
-	/* 1. Try to find an exact match. */
-	for (walk = start; walk <= last; walk++) {
-		if (walk->fixup == 0) {
-			/* A range entry, skip both parts. */
-			walk++;
-			continue;
-		}
-
-		if (walk->insn == value)
-			return walk;
-	}
-
-	/* 2. Try to find a range match. */
-	for (walk = start; walk <= (last - 1); walk++) {
-		if (walk->fixup)
-			continue;
-
-		if (walk[0].insn <= value && walk[1].insn > value)
-			return walk;
-
-		walk++;
-	}
-
-        return NULL;
-}
-
-/* Special extable search, which handles ranges.  Returns fixup */
-unsigned long search_extables_range(unsigned long addr, unsigned long *g2)
-{
-	const struct exception_table_entry *entry;
-
-	entry = search_exception_tables(addr);
-	if (!entry)
-		return 0;
-
-	/* Inside range?  Fix g2 and return correct fixup */
-	if (!entry->fixup) {
-		*g2 = (addr - entry->insn) / 4;
-		return (entry + 1)->fixup;
-	}
-
-	return entry->fixup;
-}
diff --git a/arch/sparc64/mm/fault.c b/arch/sparc64/mm/fault.c
index db1e3310e907..6f0539aa44d0 100644
--- a/arch/sparc64/mm/fault.c
+++ b/arch/sparc64/mm/fault.c
@@ -30,10 +30,6 @@
 #include <asm/sections.h>
 #include <asm/kdebug.h>
 
-#define ELEMENTS(arr) (sizeof (arr)/sizeof (arr[0]))
-
-extern struct sparc_phys_banks sp_banks[SPARC_PHYS_BANKS];
-
 /*
  * To debug kernel to catch accesses to certain virtual/physical addresses.
  * Mode = 0 selects physical watchpoints, mode = 1 selects virtual watchpoints.
@@ -71,53 +67,6 @@ void set_brkpt(unsigned long addr, unsigned char mask, int flags, int mode)
 			     : "memory");
 }
 
-/* Nice, simple, prom library does all the sweating for us. ;) */
-unsigned long __init prom_probe_memory (void)
-{
-	register struct linux_mlist_p1275 *mlist;
-	register unsigned long bytes, base_paddr, tally;
-	register int i;
-
-	i = 0;
-	mlist = *prom_meminfo()->p1275_available;
-	bytes = tally = mlist->num_bytes;
-	base_paddr = mlist->start_adr;
-  
-	sp_banks[0].base_addr = base_paddr;
-	sp_banks[0].num_bytes = bytes;
-
-	while (mlist->theres_more != (void *) 0) {
-		i++;
-		mlist = mlist->theres_more;
-		bytes = mlist->num_bytes;
-		tally += bytes;
-		if (i >= SPARC_PHYS_BANKS-1) {
-			printk ("The machine has more banks than "
-				"this kernel can support\n"
-				"Increase the SPARC_PHYS_BANKS "
-				"setting (currently %d)\n",
-				SPARC_PHYS_BANKS);
-			i = SPARC_PHYS_BANKS-1;
-			break;
-		}
-    
-		sp_banks[i].base_addr = mlist->start_adr;
-		sp_banks[i].num_bytes = mlist->num_bytes;
-	}
-
-	i++;
-	sp_banks[i].base_addr = 0xdeadbeefbeefdeadUL;
-	sp_banks[i].num_bytes = 0;
-
-	/* Now mask all bank sizes on a page boundary, it is all we can
-	 * use anyways.
-	 */
-	for (i = 0; sp_banks[i].num_bytes != 0; i++)
-		sp_banks[i].num_bytes &= PAGE_MASK;
-
-	return tally;
-}
-
 static void __kprobes unhandled_fault(unsigned long address,
 				      struct task_struct *tsk,
 				      struct pt_regs *regs)
@@ -158,7 +107,7 @@ static void bad_kernel_pc(struct pt_regs *regs)
  * this. Additionally, to prevent kswapd from ripping ptes from
  * under us, raise interrupts around the time that we look at the
  * pte, kswapd will have to wait to get his smp ipi response from
- * us. This saves us having to get page_table_lock.
+ * us. vmtruncate likewise. This saves us having to get pte lock.
  */
 static unsigned int get_user_insn(unsigned long tpc)
 {
@@ -242,7 +191,6 @@ static unsigned int get_fault_insn(struct pt_regs *regs, unsigned int insn)
 static void do_kernel_fault(struct pt_regs *regs, int si_code, int fault_code,
 			    unsigned int insn, unsigned long address)
 {
-	unsigned long g2;
 	unsigned char asi = ASI_P;
  
 	if ((!insn) && (regs->tstate & TSTATE_PRIV))
@@ -273,11 +221,9 @@ static void do_kernel_fault(struct pt_regs *regs, int si_code, int fault_code,
 		}
 	}
 		
-	g2 = regs->u_regs[UREG_G2];
-
 	/* Is this in ex_table? */
 	if (regs->tstate & TSTATE_PRIV) {
-		unsigned long fixup;
+		const struct exception_table_entry *entry;
 
 		if (asi == ASI_P && (insn & 0xc0800000) == 0xc0800000) {
 			if (insn & 0x2000)
@@ -288,10 +234,9 @@ static void do_kernel_fault(struct pt_regs *regs, int si_code, int fault_code,
 	
 		/* Look in asi.h: All _S asis have LS bit set */
 		if ((asi & 0x1) &&
-		    (fixup = search_extables_range(regs->tpc, &g2))) {
-			regs->tpc = fixup;
+		    (entry = search_exception_tables(regs->tpc))) {
+			regs->tpc = entry->fixup;
 			regs->tnpc = regs->tpc + 4;
-			regs->u_regs[UREG_G2] = g2;
 			return;
 		}
 	} else {
@@ -461,7 +406,7 @@ good_area:
 	}
 
 	up_read(&mm->mmap_sem);
-	goto fault_done;
+	return;
 
 	/*
 	 * Something tried to access memory that isn't in our memory map..
@@ -473,8 +418,7 @@ bad_area:
 
 handle_kernel_fault:
 	do_kernel_fault(regs, si_code, fault_code, insn, address);
-
-	goto fault_done;
+	return;
 
 /*
  * We ran out of memory, or some other thing happened to us that made
@@ -505,9 +449,4 @@ do_sigbus:
 	/* Kernel mode? Handle exceptions or die */
 	if (regs->tstate & TSTATE_PRIV)
 		goto handle_kernel_fault;
-
-fault_done:
-	/* These values are no longer needed, clear them. */
-	set_thread_fault_code(0);
-	current_thread_info()->fault_address = 0;
 }
diff --git a/arch/sparc64/mm/generic.c b/arch/sparc64/mm/generic.c
index c954d91f01d0..580b63da836b 100644
--- a/arch/sparc64/mm/generic.c
+++ b/arch/sparc64/mm/generic.c
@@ -15,6 +15,15 @@
 #include <asm/page.h>
 #include <asm/tlbflush.h>
 
+static inline pte_t mk_pte_io(unsigned long page, pgprot_t prot, int space)
+{
+	pte_t pte;
+	pte_val(pte) = (((page) | pgprot_val(prot) | _PAGE_E) &
+			~(unsigned long)_PAGE_CACHE);
+	pte_val(pte) |= (((unsigned long)space) << 32);
+	return pte;
+}
+
 /* Remap IO memory, the same way as remap_pfn_range(), but use
  * the obio memory space.
  *
@@ -68,6 +77,7 @@ static inline void io_remap_pte_range(struct mm_struct *mm, pte_t * pte,
 			BUG_ON(!pte_none(*pte));
 			set_pte_at(mm, address, pte, entry);
 			address += PAGE_SIZE;
+			pte_val(entry) += PAGE_SIZE;
 			pte++;
 		} while (address < curend);
 	} while (address < end);
@@ -126,15 +136,21 @@ int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
 	struct mm_struct *mm = vma->vm_mm;
 	int space = GET_IOSPACE(pfn);
 	unsigned long offset = GET_PFN(pfn) << PAGE_SHIFT;
+	unsigned long phys_base;
+
+	phys_base = offset | (((unsigned long) space) << 32UL);
+
+	/* See comment in mm/memory.c remap_pfn_range */
+	vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP;
+	vma->vm_pgoff = phys_base >> PAGE_SHIFT;
 
 	prot = __pgprot(pg_iobits);
 	offset -= from;
 	dir = pgd_offset(mm, from);
 	flush_cache_range(vma, beg, end);
 
-	spin_lock(&mm->page_table_lock);
 	while (from < end) {
-		pud_t *pud = pud_alloc(current->mm, dir, from);
+		pud_t *pud = pud_alloc(mm, dir, from);
 		error = -ENOMEM;
 		if (!pud)
 			break;
@@ -144,8 +160,7 @@ int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
 		from = (from + PGDIR_SIZE) & PGDIR_MASK;
 		dir++;
 	}
-	flush_tlb_range(vma, beg, end);
-	spin_unlock(&mm->page_table_lock);
 
+	flush_tlb_range(vma, beg, end);
 	return error;
 }
diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c
index fdb1ebb308c9..1e44ee26cee8 100644
--- a/arch/sparc64/mm/init.c
+++ b/arch/sparc64/mm/init.c
@@ -20,6 +20,8 @@
 #include <linux/fs.h>
 #include <linux/seq_file.h>
 #include <linux/kprobes.h>
+#include <linux/cache.h>
+#include <linux/sort.h>
 
 #include <asm/head.h>
 #include <asm/system.h>
@@ -40,24 +42,80 @@
 
 extern void device_scan(void);
 
-struct sparc_phys_banks sp_banks[SPARC_PHYS_BANKS];
+#define MAX_BANKS	32
 
-unsigned long *sparc64_valid_addr_bitmap;
+static struct linux_prom64_registers pavail[MAX_BANKS] __initdata;
+static struct linux_prom64_registers pavail_rescan[MAX_BANKS] __initdata;
+static int pavail_ents __initdata;
+static int pavail_rescan_ents __initdata;
+
+static int cmp_p64(const void *a, const void *b)
+{
+	const struct linux_prom64_registers *x = a, *y = b;
+
+	if (x->phys_addr > y->phys_addr)
+		return 1;
+	if (x->phys_addr < y->phys_addr)
+		return -1;
+	return 0;
+}
+
+static void __init read_obp_memory(const char *property,
+				   struct linux_prom64_registers *regs,
+				   int *num_ents)
+{
+	int node = prom_finddevice("/memory");
+	int prop_size = prom_getproplen(node, property);
+	int ents, ret, i;
+
+	ents = prop_size / sizeof(struct linux_prom64_registers);
+	if (ents > MAX_BANKS) {
+		prom_printf("The machine has more %s property entries than "
+			    "this kernel can support (%d).\n",
+			    property, MAX_BANKS);
+		prom_halt();
+	}
+
+	ret = prom_getproperty(node, property, (char *) regs, prop_size);
+	if (ret == -1) {
+		prom_printf("Couldn't get %s property from /memory.\n");
+		prom_halt();
+	}
+
+	*num_ents = ents;
+
+	/* Sanitize what we got from the firmware, by page aligning
+	 * everything.
+	 */
+	for (i = 0; i < ents; i++) {
+		unsigned long base, size;
+
+		base = regs[i].phys_addr;
+		size = regs[i].reg_size;
+
+		size &= PAGE_MASK;
+		if (base & ~PAGE_MASK) {
+			unsigned long new_base = PAGE_ALIGN(base);
+
+			size -= new_base - base;
+			if ((long) size < 0L)
+				size = 0UL;
+			base = new_base;
+		}
+		regs[i].phys_addr = base;
+		regs[i].reg_size = size;
+	}
+	sort(regs, ents, sizeof(struct linux_prom64_registers),
+	     cmp_p64, NULL);
+}
+
+unsigned long *sparc64_valid_addr_bitmap __read_mostly;
 
 /* Ugly, but necessary... -DaveM */
-unsigned long phys_base;
-unsigned long kern_base;
-unsigned long kern_size;
-unsigned long pfn_base;
-
-/* This is even uglier. We have a problem where the kernel may not be
- * located at phys_base. However, initial __alloc_bootmem() calls need to
- * be adjusted to be within the 4-8Megs that the kernel is mapped to, else
- * those page mappings wont work. Things are ok after inherit_prom_mappings
- * is called though. Dave says he'll clean this up some other time.
- * -- BenC
- */
-static unsigned long bootmap_base;
+unsigned long phys_base __read_mostly;
+unsigned long kern_base __read_mostly;
+unsigned long kern_size __read_mostly;
+unsigned long pfn_base __read_mostly;
 
 /* get_new_mmu_context() uses "cache + 1".  */
 DEFINE_SPINLOCK(ctx_alloc_lock);
@@ -73,7 +131,13 @@ extern unsigned long sparc_ramdisk_image64;
 extern unsigned int sparc_ramdisk_image;
 extern unsigned int sparc_ramdisk_size;
 
-struct page *mem_map_zero;
+struct page *mem_map_zero __read_mostly;
+
+unsigned int sparc64_highest_unlocked_tlb_ent __read_mostly;
+
+unsigned long sparc64_kern_pri_context __read_mostly;
+unsigned long sparc64_kern_pri_nuc_bits __read_mostly;
+unsigned long sparc64_kern_sec_context __read_mostly;
 
 int bigkernel = 0;
 
@@ -179,8 +243,6 @@ static __inline__ void clear_dcache_dirty_cpu(struct page *page, unsigned long c
 			     : "g1", "g7");
 }
 
-extern void __update_mmu_cache(unsigned long mmu_context_hw, unsigned long address, pte_t pte, int code);
-
 void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
 {
 	struct page *page;
@@ -207,10 +269,6 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t p
 
 		put_cpu();
 	}
-
-	if (get_thread_fault_code())
-		__update_mmu_cache(CTX_NRBITS(vma->vm_mm->context),
-				   address, pte, get_thread_fault_code());
 }
 
 void flush_dcache_page(struct page *page)
@@ -310,6 +368,11 @@ struct linux_prom_translation {
 	unsigned long data;
 };
 
+/* Exported for kernel TLB miss handling in ktlb.S */
+struct linux_prom_translation prom_trans[512] __read_mostly;
+unsigned int prom_trans_ents __read_mostly;
+unsigned int swapper_pgd_zero __read_mostly;
+
 extern unsigned long prom_boot_page;
 extern void prom_remap(unsigned long physpage, unsigned long virtpage, int mmu_ihandle);
 extern int prom_get_mmu_ihandle(void);
@@ -318,297 +381,162 @@ extern void register_prom_callbacks(void);
 /* Exported for SMP bootup purposes. */
 unsigned long kern_locked_tte_data;
 
-void __init early_pgtable_allocfail(char *type)
-{
-	prom_printf("inherit_prom_mappings: Cannot alloc kernel %s.\n", type);
-	prom_halt();
-}
-
-#define BASE_PAGE_SIZE 8192
-static pmd_t *prompmd;
-
 /*
  * Translate PROM's mapping we capture at boot time into physical address.
  * The second parameter is only set from prom_callback() invocations.
  */
 unsigned long prom_virt_to_phys(unsigned long promva, int *error)
 {
-	pmd_t *pmdp = prompmd + ((promva >> 23) & 0x7ff);
-	pte_t *ptep;
-	unsigned long base;
-
-	if (pmd_none(*pmdp)) {
-		if (error)
-			*error = 1;
-		return(0);
-	}
-	ptep = (pte_t *)__pmd_page(*pmdp) + ((promva >> 13) & 0x3ff);
-	if (!pte_present(*ptep)) {
-		if (error)
-			*error = 1;
-		return(0);
-	}
-	if (error) {
-		*error = 0;
-		return(pte_val(*ptep));
+	int i;
+
+	for (i = 0; i < prom_trans_ents; i++) {
+		struct linux_prom_translation *p = &prom_trans[i];
+
+		if (promva >= p->virt &&
+		    promva < (p->virt + p->size)) {
+			unsigned long base = p->data & _PAGE_PADDR;
+
+			if (error)
+				*error = 0;
+			return base + (promva & (8192 - 1));
+		}
 	}
-	base = pte_val(*ptep) & _PAGE_PADDR;
-	return(base + (promva & (BASE_PAGE_SIZE - 1)));
+	if (error)
+		*error = 1;
+	return 0UL;
 }
 
-static void inherit_prom_mappings(void)
+/* The obp translations are saved based on 8k pagesize, since obp can
+ * use a mixture of pagesizes. Misses to the LOW_OBP_ADDRESS ->
+ * HI_OBP_ADDRESS range are handled in ktlb.S and do not use the vpte
+ * scheme (also, see rant in inherit_locked_prom_mappings()).
+ */
+static inline int in_obp_range(unsigned long vaddr)
 {
-	struct linux_prom_translation *trans;
-	unsigned long phys_page, tte_vaddr, tte_data;
-	void (*remap_func)(unsigned long, unsigned long, int);
-	pmd_t *pmdp;
-	pte_t *ptep;
-	int node, n, i, tsz;
-	extern unsigned int obp_iaddr_patch[2], obp_daddr_patch[2];
+	return (vaddr >= LOW_OBP_ADDRESS &&
+		vaddr < HI_OBP_ADDRESS);
+}
+
+static int cmp_ptrans(const void *a, const void *b)
+{
+	const struct linux_prom_translation *x = a, *y = b;
+
+	if (x->virt > y->virt)
+		return 1;
+	if (x->virt < y->virt)
+		return -1;
+	return 0;
+}
+
+/* Read OBP translations property into 'prom_trans[]'.  */
+static void __init read_obp_translations(void)
+{
+	int n, node, ents, first, last, i;
 
 	node = prom_finddevice("/virtual-memory");
 	n = prom_getproplen(node, "translations");
-	if (n == 0 || n == -1) {
-		prom_printf("Couldn't get translation property\n");
+	if (unlikely(n == 0 || n == -1)) {
+		prom_printf("prom_mappings: Couldn't get size.\n");
 		prom_halt();
 	}
-	n += 5 * sizeof(struct linux_prom_translation);
-	for (tsz = 1; tsz < n; tsz <<= 1)
-		/* empty */;
-	trans = __alloc_bootmem(tsz, SMP_CACHE_BYTES, bootmap_base);
-	if (trans == NULL) {
-		prom_printf("inherit_prom_mappings: Cannot alloc translations.\n");
+	if (unlikely(n > sizeof(prom_trans))) {
+		prom_printf("prom_mappings: Size %Zd is too big.\n", n);
 		prom_halt();
 	}
-	memset(trans, 0, tsz);
 
-	if ((n = prom_getproperty(node, "translations", (char *)trans, tsz)) == -1) {
-		prom_printf("Couldn't get translation property\n");
+	if ((n = prom_getproperty(node, "translations",
+				  (char *)&prom_trans[0],
+				  sizeof(prom_trans))) == -1) {
+		prom_printf("prom_mappings: Couldn't get property.\n");
 		prom_halt();
 	}
-	n = n / sizeof(*trans);
 
-	/*
-	 * The obp translations are saved based on 8k pagesize, since obp can
-	 * use a mixture of pagesizes. Misses to the 0xf0000000 - 0x100000000,
-	 * ie obp range, are handled in entry.S and do not use the vpte scheme
-	 * (see rant in inherit_locked_prom_mappings()).
-	 */
-#define OBP_PMD_SIZE 2048
-	prompmd = __alloc_bootmem(OBP_PMD_SIZE, OBP_PMD_SIZE, bootmap_base);
-	if (prompmd == NULL)
-		early_pgtable_allocfail("pmd");
-	memset(prompmd, 0, OBP_PMD_SIZE);
-	for (i = 0; i < n; i++) {
-		unsigned long vaddr;
-
-		if (trans[i].virt >= LOW_OBP_ADDRESS && trans[i].virt < HI_OBP_ADDRESS) {
-			for (vaddr = trans[i].virt;
-			     ((vaddr < trans[i].virt + trans[i].size) && 
-			     (vaddr < HI_OBP_ADDRESS));
-			     vaddr += BASE_PAGE_SIZE) {
-				unsigned long val;
-
-				pmdp = prompmd + ((vaddr >> 23) & 0x7ff);
-				if (pmd_none(*pmdp)) {
-					ptep = __alloc_bootmem(BASE_PAGE_SIZE,
-							       BASE_PAGE_SIZE,
-							       bootmap_base);
-					if (ptep == NULL)
-						early_pgtable_allocfail("pte");
-					memset(ptep, 0, BASE_PAGE_SIZE);
-					pmd_set(pmdp, ptep);
-				}
-				ptep = (pte_t *)__pmd_page(*pmdp) +
-						((vaddr >> 13) & 0x3ff);
+	n = n / sizeof(struct linux_prom_translation);
 
-				val = trans[i].data;
+	ents = n;
 
-				/* Clear diag TTE bits. */
-				if (tlb_type == spitfire)
-					val &= ~0x0003fe0000000000UL;
+	sort(prom_trans, ents, sizeof(struct linux_prom_translation),
+	     cmp_ptrans, NULL);
 
-				set_pte_at(&init_mm, vaddr,
-					   ptep, __pte(val | _PAGE_MODIFIED));
-				trans[i].data += BASE_PAGE_SIZE;
-			}
-		}
+	/* Now kick out all the non-OBP entries.  */
+	for (i = 0; i < ents; i++) {
+		if (in_obp_range(prom_trans[i].virt))
+			break;
+	}
+	first = i;
+	for (; i < ents; i++) {
+		if (!in_obp_range(prom_trans[i].virt))
+			break;
 	}
-	phys_page = __pa(prompmd);
-	obp_iaddr_patch[0] |= (phys_page >> 10);
-	obp_iaddr_patch[1] |= (phys_page & 0x3ff);
-	flushi((long)&obp_iaddr_patch[0]);
-	obp_daddr_patch[0] |= (phys_page >> 10);
-	obp_daddr_patch[1] |= (phys_page & 0x3ff);
-	flushi((long)&obp_daddr_patch[0]);
+	last = i;
 
-	/* Now fixup OBP's idea about where we really are mapped. */
-	prom_printf("Remapping the kernel... ");
+	for (i = 0; i < (last - first); i++) {
+		struct linux_prom_translation *src = &prom_trans[i + first];
+		struct linux_prom_translation *dest = &prom_trans[i];
 
-	/* Spitfire Errata #32 workaround */
-	/* NOTE: Using plain zero for the context value is
-	 *       correct here, we are not using the Linux trap
-	 *       tables yet so we should not use the special
-	 *       UltraSPARC-III+ page size encodings yet.
-	 */
-	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
-			     "flush	%%g6"
-			     : /* No outputs */
-			     : "r" (0), "r" (PRIMARY_CONTEXT), "i" (ASI_DMMU));
-
-	switch (tlb_type) {
-	default:
-	case spitfire:
-		phys_page = spitfire_get_dtlb_data(sparc64_highest_locked_tlbent());
-		break;
-
-	case cheetah:
-	case cheetah_plus:
-		phys_page = cheetah_get_litlb_data(sparc64_highest_locked_tlbent());
-		break;
-	};
-
-	phys_page &= _PAGE_PADDR;
-	phys_page += ((unsigned long)&prom_boot_page -
-		      (unsigned long)KERNBASE);
+		*dest = *src;
+	}
+	for (; i < ents; i++) {
+		struct linux_prom_translation *dest = &prom_trans[i];
+		dest->virt = dest->size = dest->data = 0x0UL;
+	}
+
+	prom_trans_ents = last - first;
 
 	if (tlb_type == spitfire) {
-		/* Lock this into i/d tlb entry 59 */
-		__asm__ __volatile__(
-			"stxa	%%g0, [%2] %3\n\t"
-			"stxa	%0, [%1] %4\n\t"
-			"membar	#Sync\n\t"
-			"flush	%%g6\n\t"
-			"stxa	%%g0, [%2] %5\n\t"
-			"stxa	%0, [%1] %6\n\t"
-			"membar	#Sync\n\t"
-			"flush	%%g6"
-			: : "r" (phys_page | _PAGE_VALID | _PAGE_SZ8K | _PAGE_CP |
-				 _PAGE_CV | _PAGE_P | _PAGE_L | _PAGE_W),
-			"r" (59 << 3), "r" (TLB_TAG_ACCESS),
-			"i" (ASI_DMMU), "i" (ASI_DTLB_DATA_ACCESS),
-			"i" (ASI_IMMU), "i" (ASI_ITLB_DATA_ACCESS)
-			: "memory");
-	} else if (tlb_type == cheetah || tlb_type == cheetah_plus) {
-		/* Lock this into i/d tlb-0 entry 11 */
-		__asm__ __volatile__(
-			"stxa	%%g0, [%2] %3\n\t"
-			"stxa	%0, [%1] %4\n\t"
-			"membar	#Sync\n\t"
-			"flush	%%g6\n\t"
-			"stxa	%%g0, [%2] %5\n\t"
-			"stxa	%0, [%1] %6\n\t"
-			"membar	#Sync\n\t"
-			"flush	%%g6"
-			: : "r" (phys_page | _PAGE_VALID | _PAGE_SZ8K | _PAGE_CP |
-				 _PAGE_CV | _PAGE_P | _PAGE_L | _PAGE_W),
-			"r" ((0 << 16) | (11 << 3)), "r" (TLB_TAG_ACCESS),
-			"i" (ASI_DMMU), "i" (ASI_DTLB_DATA_ACCESS),
-			"i" (ASI_IMMU), "i" (ASI_ITLB_DATA_ACCESS)
-			: "memory");
-	} else {
-		/* Implement me :-) */
-		BUG();
+		/* Clear diag TTE bits. */
+		for (i = 0; i < prom_trans_ents; i++)
+			prom_trans[i].data &= ~0x0003fe0000000000UL;
 	}
+}
 
-	tte_vaddr = (unsigned long) KERNBASE;
+static void __init remap_kernel(void)
+{
+	unsigned long phys_page, tte_vaddr, tte_data;
+	int tlb_ent = sparc64_highest_locked_tlbent();
 
-	/* Spitfire Errata #32 workaround */
-	/* NOTE: Using plain zero for the context value is
-	 *       correct here, we are not using the Linux trap
-	 *       tables yet so we should not use the special
-	 *       UltraSPARC-III+ page size encodings yet.
-	 */
-	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
-			     "flush	%%g6"
-			     : /* No outputs */
-			     : "r" (0),
-			     "r" (PRIMARY_CONTEXT), "i" (ASI_DMMU));
-
-	if (tlb_type == spitfire)
-		tte_data = spitfire_get_dtlb_data(sparc64_highest_locked_tlbent());
-	else
-		tte_data = cheetah_get_ldtlb_data(sparc64_highest_locked_tlbent());
+	tte_vaddr = (unsigned long) KERNBASE;
+	phys_page = (prom_boot_mapping_phys_low >> 22UL) << 22UL;
+	tte_data = (phys_page | (_PAGE_VALID | _PAGE_SZ4MB |
+				 _PAGE_CP | _PAGE_CV | _PAGE_P |
+				 _PAGE_L | _PAGE_W));
 
 	kern_locked_tte_data = tte_data;
 
-	remap_func = (void *)  ((unsigned long) &prom_remap -
-				(unsigned long) &prom_boot_page);
-
-
-	/* Spitfire Errata #32 workaround */
-	/* NOTE: Using plain zero for the context value is
-	 *       correct here, we are not using the Linux trap
-	 *       tables yet so we should not use the special
-	 *       UltraSPARC-III+ page size encodings yet.
-	 */
-	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
-			     "flush	%%g6"
-			     : /* No outputs */
-			     : "r" (0),
-			     "r" (PRIMARY_CONTEXT), "i" (ASI_DMMU));
-
-	remap_func((tlb_type == spitfire ?
-		    (spitfire_get_dtlb_data(sparc64_highest_locked_tlbent()) & _PAGE_PADDR) :
-		    (cheetah_get_litlb_data(sparc64_highest_locked_tlbent()) & _PAGE_PADDR)),
-		   (unsigned long) KERNBASE,
-		   prom_get_mmu_ihandle());
-
-	if (bigkernel)
-		remap_func(((tte_data + 0x400000) & _PAGE_PADDR),
-			(unsigned long) KERNBASE + 0x400000, prom_get_mmu_ihandle());
-
-	/* Flush out that temporary mapping. */
-	spitfire_flush_dtlb_nucleus_page(0x0);
-	spitfire_flush_itlb_nucleus_page(0x0);
-
-	/* Now lock us back into the TLBs via OBP. */
-	prom_dtlb_load(sparc64_highest_locked_tlbent(), tte_data, tte_vaddr);
-	prom_itlb_load(sparc64_highest_locked_tlbent(), tte_data, tte_vaddr);
+	/* Now lock us into the TLBs via OBP. */
+	prom_dtlb_load(tlb_ent, tte_data, tte_vaddr);
+	prom_itlb_load(tlb_ent, tte_data, tte_vaddr);
 	if (bigkernel) {
-		prom_dtlb_load(sparc64_highest_locked_tlbent()-1, tte_data + 0x400000, 
-								tte_vaddr + 0x400000);
-		prom_itlb_load(sparc64_highest_locked_tlbent()-1, tte_data + 0x400000, 
-								tte_vaddr + 0x400000);
+		tlb_ent -= 1;
+		prom_dtlb_load(tlb_ent,
+			       tte_data + 0x400000, 
+			       tte_vaddr + 0x400000);
+		prom_itlb_load(tlb_ent,
+			       tte_data + 0x400000, 
+			       tte_vaddr + 0x400000);
 	}
-
-	/* Re-read translations property. */
-	if ((n = prom_getproperty(node, "translations", (char *)trans, tsz)) == -1) {
-		prom_printf("Couldn't get translation property\n");
-		prom_halt();
+	sparc64_highest_unlocked_tlb_ent = tlb_ent - 1;
+	if (tlb_type == cheetah_plus) {
+		sparc64_kern_pri_context = (CTX_CHEETAH_PLUS_CTX0 |
+					    CTX_CHEETAH_PLUS_NUC);
+		sparc64_kern_pri_nuc_bits = CTX_CHEETAH_PLUS_NUC;
+		sparc64_kern_sec_context = CTX_CHEETAH_PLUS_CTX0;
 	}
-	n = n / sizeof(*trans);
-
-	for (i = 0; i < n; i++) {
-		unsigned long vaddr = trans[i].virt;
-		unsigned long size = trans[i].size;
-
-		if (vaddr < 0xf0000000UL) {
-			unsigned long avoid_start = (unsigned long) KERNBASE;
-			unsigned long avoid_end = avoid_start + (4 * 1024 * 1024);
-
-			if (bigkernel)
-				avoid_end += (4 * 1024 * 1024);
-			if (vaddr < avoid_start) {
-				unsigned long top = vaddr + size;
+}
 
-				if (top > avoid_start)
-					top = avoid_start;
-				prom_unmap(top - vaddr, vaddr);
-			}
-			if ((vaddr + size) > avoid_end) {
-				unsigned long bottom = vaddr;
 
-				if (bottom < avoid_end)
-					bottom = avoid_end;
-				prom_unmap((vaddr + size) - bottom, bottom);
-			}
-		}
-	}
+static void __init inherit_prom_mappings(void)
+{
+	read_obp_translations();
 
+	/* Now fixup OBP's idea about where we really are mapped. */
+	prom_printf("Remapping the kernel... ");
+	remap_kernel();
 	prom_printf("done.\n");
 
+	prom_printf("Registering callbacks... ");
 	register_prom_callbacks();
+	prom_printf("done.\n");
 }
 
 /* The OBP specifications for sun4u mark 0xfffffffc00000000 and
@@ -792,8 +720,8 @@ void inherit_locked_prom_mappings(int save_p)
 		}
 	}
 	if (tlb_type == spitfire) {
-		int high = SPITFIRE_HIGHEST_LOCKED_TLBENT - bigkernel;
-		for (i = 0; i < high; i++) {
+		int high = sparc64_highest_unlocked_tlb_ent;
+		for (i = 0; i <= high; i++) {
 			unsigned long data;
 
 			/* Spitfire Errata #32 workaround */
@@ -881,9 +809,9 @@ void inherit_locked_prom_mappings(int save_p)
 			}
 		}
 	} else if (tlb_type == cheetah || tlb_type == cheetah_plus) {
-		int high = CHEETAH_HIGHEST_LOCKED_TLBENT - bigkernel;
+		int high = sparc64_highest_unlocked_tlb_ent;
 
-		for (i = 0; i < high; i++) {
+		for (i = 0; i <= high; i++) {
 			unsigned long data;
 
 			data = cheetah_get_ldtlb_data(i);
@@ -1276,14 +1204,14 @@ unsigned long __init bootmem_init(unsigned long *pages_avail)
 	int i;
 
 #ifdef CONFIG_DEBUG_BOOTMEM
-	prom_printf("bootmem_init: Scan sp_banks, ");
+	prom_printf("bootmem_init: Scan pavail, ");
 #endif
 
 	bytes_avail = 0UL;
-	for (i = 0; sp_banks[i].num_bytes != 0; i++) {
-		end_of_phys_memory = sp_banks[i].base_addr +
-			sp_banks[i].num_bytes;
-		bytes_avail += sp_banks[i].num_bytes;
+	for (i = 0; i < pavail_ents; i++) {
+		end_of_phys_memory = pavail[i].phys_addr +
+			pavail[i].reg_size;
+		bytes_avail += pavail[i].reg_size;
 		if (cmdline_memory_size) {
 			if (bytes_avail > cmdline_memory_size) {
 				unsigned long slack = bytes_avail - cmdline_memory_size;
@@ -1291,12 +1219,15 @@ unsigned long __init bootmem_init(unsigned long *pages_avail)
 				bytes_avail -= slack;
 				end_of_phys_memory -= slack;
 
-				sp_banks[i].num_bytes -= slack;
-				if (sp_banks[i].num_bytes == 0) {
-					sp_banks[i].base_addr = 0xdeadbeef;
+				pavail[i].reg_size -= slack;
+				if ((long)pavail[i].reg_size <= 0L) {
+					pavail[i].phys_addr = 0xdeadbeefUL;
+					pavail[i].reg_size = 0UL;
+					pavail_ents = i;
 				} else {
-					sp_banks[i+1].num_bytes = 0;
-					sp_banks[i+1].base_addr = 0xdeadbeef;
+					pavail[i+1].reg_size = 0Ul;
+					pavail[i+1].phys_addr = 0xdeadbeefUL;
+					pavail_ents = i + 1;
 				}
 				break;
 			}
@@ -1347,17 +1278,15 @@ unsigned long __init bootmem_init(unsigned long *pages_avail)
 #endif
 	bootmap_size = init_bootmem_node(NODE_DATA(0), bootmap_pfn, pfn_base, end_pfn);
 
-	bootmap_base = bootmap_pfn << PAGE_SHIFT;
-
 	/* Now register the available physical memory with the
 	 * allocator.
 	 */
-	for (i = 0; sp_banks[i].num_bytes != 0; i++) {
+	for (i = 0; i < pavail_ents; i++) {
 #ifdef CONFIG_DEBUG_BOOTMEM
-		prom_printf("free_bootmem(sp_banks:%d): base[%lx] size[%lx]\n",
-			    i, sp_banks[i].base_addr, sp_banks[i].num_bytes);
+		prom_printf("free_bootmem(pavail:%d): base[%lx] size[%lx]\n",
+			    i, pavail[i].phys_addr, pavail[i].reg_size);
 #endif
-		free_bootmem(sp_banks[i].base_addr, sp_banks[i].num_bytes);
+		free_bootmem(pavail[i].phys_addr, pavail[i].reg_size);
 	}
 
 #ifdef CONFIG_BLK_DEV_INITRD
@@ -1398,121 +1327,167 @@ unsigned long __init bootmem_init(unsigned long *pages_avail)
 	return end_pfn;
 }
 
+#ifdef CONFIG_DEBUG_PAGEALLOC
+static unsigned long kernel_map_range(unsigned long pstart, unsigned long pend, pgprot_t prot)
+{
+	unsigned long vstart = PAGE_OFFSET + pstart;
+	unsigned long vend = PAGE_OFFSET + pend;
+	unsigned long alloc_bytes = 0UL;
+
+	if ((vstart & ~PAGE_MASK) || (vend & ~PAGE_MASK)) {
+		prom_printf("kernel_map: Unaligned physmem[%lx:%lx]\n",
+			    vstart, vend);
+		prom_halt();
+	}
+
+	while (vstart < vend) {
+		unsigned long this_end, paddr = __pa(vstart);
+		pgd_t *pgd = pgd_offset_k(vstart);
+		pud_t *pud;
+		pmd_t *pmd;
+		pte_t *pte;
+
+		pud = pud_offset(pgd, vstart);
+		if (pud_none(*pud)) {
+			pmd_t *new;
+
+			new = __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, PAGE_SIZE);
+			alloc_bytes += PAGE_SIZE;
+			pud_populate(&init_mm, pud, new);
+		}
+
+		pmd = pmd_offset(pud, vstart);
+		if (!pmd_present(*pmd)) {
+			pte_t *new;
+
+			new = __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, PAGE_SIZE);
+			alloc_bytes += PAGE_SIZE;
+			pmd_populate_kernel(&init_mm, pmd, new);
+		}
+
+		pte = pte_offset_kernel(pmd, vstart);
+		this_end = (vstart + PMD_SIZE) & PMD_MASK;
+		if (this_end > vend)
+			this_end = vend;
+
+		while (vstart < this_end) {
+			pte_val(*pte) = (paddr | pgprot_val(prot));
+
+			vstart += PAGE_SIZE;
+			paddr += PAGE_SIZE;
+			pte++;
+		}
+	}
+
+	return alloc_bytes;
+}
+
+static struct linux_prom64_registers pall[MAX_BANKS] __initdata;
+static int pall_ents __initdata;
+
+extern unsigned int kvmap_linear_patch[1];
+
+static void __init kernel_physical_mapping_init(void)
+{
+	unsigned long i, mem_alloced = 0UL;
+
+	read_obp_memory("reg", &pall[0], &pall_ents);
+
+	for (i = 0; i < pall_ents; i++) {
+		unsigned long phys_start, phys_end;
+
+		phys_start = pall[i].phys_addr;
+		phys_end = phys_start + pall[i].reg_size;
+		mem_alloced += kernel_map_range(phys_start, phys_end,
+						PAGE_KERNEL);
+	}
+
+	printk("Allocated %ld bytes for kernel page tables.\n",
+	       mem_alloced);
+
+	kvmap_linear_patch[0] = 0x01000000; /* nop */
+	flushi(&kvmap_linear_patch[0]);
+
+	__flush_tlb_all();
+}
+
+void kernel_map_pages(struct page *page, int numpages, int enable)
+{
+	unsigned long phys_start = page_to_pfn(page) << PAGE_SHIFT;
+	unsigned long phys_end = phys_start + (numpages * PAGE_SIZE);
+
+	kernel_map_range(phys_start, phys_end,
+			 (enable ? PAGE_KERNEL : __pgprot(0)));
+
+	/* we should perform an IPI and flush all tlbs,
+	 * but that can deadlock->flush only current cpu.
+	 */
+	__flush_tlb_kernel_range(PAGE_OFFSET + phys_start,
+				 PAGE_OFFSET + phys_end);
+}
+#endif
+
+unsigned long __init find_ecache_flush_span(unsigned long size)
+{
+	int i;
+
+	for (i = 0; i < pavail_ents; i++) {
+		if (pavail[i].reg_size >= size)
+			return pavail[i].phys_addr;
+	}
+
+	return ~0UL;
+}
+
 /* paging_init() sets up the page tables */
 
 extern void cheetah_ecache_flush_init(void);
 
 static unsigned long last_valid_pfn;
+pgd_t swapper_pg_dir[2048];
 
 void __init paging_init(void)
 {
-	extern pmd_t swapper_pmd_dir[1024];
-	extern unsigned int sparc64_vpte_patchme1[1];
-	extern unsigned int sparc64_vpte_patchme2[1];
-	unsigned long alias_base = kern_base + PAGE_OFFSET;
-	unsigned long second_alias_page = 0;
-	unsigned long pt, flags, end_pfn, pages_avail;
-	unsigned long shift = alias_base - ((unsigned long)KERNBASE);
-	unsigned long real_end;
+	unsigned long end_pfn, pages_avail, shift;
+	unsigned long real_end, i;
+
+	/* Find available physical memory... */
+	read_obp_memory("available", &pavail[0], &pavail_ents);
+
+	phys_base = 0xffffffffffffffffUL;
+	for (i = 0; i < pavail_ents; i++)
+		phys_base = min(phys_base, pavail[i].phys_addr);
+
+	pfn_base = phys_base >> PAGE_SHIFT;
+
+	kern_base = (prom_boot_mapping_phys_low >> 22UL) << 22UL;
+	kern_size = (unsigned long)&_end - (unsigned long)KERNBASE;
 
 	set_bit(0, mmu_context_bmap);
 
+	shift = kern_base + PAGE_OFFSET - ((unsigned long)KERNBASE);
+
 	real_end = (unsigned long)_end;
 	if ((real_end > ((unsigned long)KERNBASE + 0x400000)))
 		bigkernel = 1;
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (sparc_ramdisk_image || sparc_ramdisk_image64)
-		real_end = (PAGE_ALIGN(real_end) + PAGE_ALIGN(sparc_ramdisk_size));
-#endif
-
-	/* We assume physical memory starts at some 4mb multiple,
-	 * if this were not true we wouldn't boot up to this point
-	 * anyways.
-	 */
-	pt  = kern_base | _PAGE_VALID | _PAGE_SZ4MB;
-	pt |= _PAGE_CP | _PAGE_CV | _PAGE_P | _PAGE_L | _PAGE_W;
-	local_irq_save(flags);
-	if (tlb_type == spitfire) {
-		__asm__ __volatile__(
-	"	stxa	%1, [%0] %3\n"
-	"	stxa	%2, [%5] %4\n"
-	"	membar	#Sync\n"
-	"	flush	%%g6\n"
-	"	nop\n"
-	"	nop\n"
-	"	nop\n"
-		: /* No outputs */
-		: "r" (TLB_TAG_ACCESS), "r" (alias_base), "r" (pt),
-		  "i" (ASI_DMMU), "i" (ASI_DTLB_DATA_ACCESS), "r" (61 << 3)
-		: "memory");
-		if (real_end >= KERNBASE + 0x340000) {
-			second_alias_page = alias_base + 0x400000;
-			__asm__ __volatile__(
-		"	stxa	%1, [%0] %3\n"
-		"	stxa	%2, [%5] %4\n"
-		"	membar	#Sync\n"
-		"	flush	%%g6\n"
-		"	nop\n"
-		"	nop\n"
-		"	nop\n"
-			: /* No outputs */
-			: "r" (TLB_TAG_ACCESS), "r" (second_alias_page), "r" (pt + 0x400000),
-			  "i" (ASI_DMMU), "i" (ASI_DTLB_DATA_ACCESS), "r" (60 << 3)
-			: "memory");
-		}
-	} else if (tlb_type == cheetah || tlb_type == cheetah_plus) {
-		__asm__ __volatile__(
-	"	stxa	%1, [%0] %3\n"
-	"	stxa	%2, [%5] %4\n"
-	"	membar	#Sync\n"
-	"	flush	%%g6\n"
-	"	nop\n"
-	"	nop\n"
-	"	nop\n"
-		: /* No outputs */
-		: "r" (TLB_TAG_ACCESS), "r" (alias_base), "r" (pt),
-		  "i" (ASI_DMMU), "i" (ASI_DTLB_DATA_ACCESS), "r" ((0<<16) | (13<<3))
-		: "memory");
-		if (real_end >= KERNBASE + 0x340000) {
-			second_alias_page = alias_base + 0x400000;
-			__asm__ __volatile__(
-		"	stxa	%1, [%0] %3\n"
-		"	stxa	%2, [%5] %4\n"
-		"	membar	#Sync\n"
-		"	flush	%%g6\n"
-		"	nop\n"
-		"	nop\n"
-		"	nop\n"
-			: /* No outputs */
-			: "r" (TLB_TAG_ACCESS), "r" (second_alias_page), "r" (pt + 0x400000),
-			  "i" (ASI_DMMU), "i" (ASI_DTLB_DATA_ACCESS), "r" ((0<<16) | (12<<3))
-			: "memory");
-		}
+	if ((real_end > ((unsigned long)KERNBASE + 0x800000))) {
+		prom_printf("paging_init: Kernel > 8MB, too large.\n");
+		prom_halt();
 	}
-	local_irq_restore(flags);
-	
-	/* Now set kernel pgd to upper alias so physical page computations
+
+	/* Set kernel pgd to upper alias so physical page computations
 	 * work.
 	 */
 	init_mm.pgd += ((shift) / (sizeof(pgd_t)));
 	
-	memset(swapper_pmd_dir, 0, sizeof(swapper_pmd_dir));
+	memset(swapper_low_pmd_dir, 0, sizeof(swapper_low_pmd_dir));
 
 	/* Now can init the kernel/bad page tables. */
 	pud_set(pud_offset(&swapper_pg_dir[0], 0),
-		swapper_pmd_dir + (shift / sizeof(pgd_t)));
+		swapper_low_pmd_dir + (shift / sizeof(pgd_t)));
 	
-	sparc64_vpte_patchme1[0] |=
-		(((unsigned long)pgd_val(init_mm.pgd[0])) >> 10);
-	sparc64_vpte_patchme2[0] |=
-		(((unsigned long)pgd_val(init_mm.pgd[0])) & 0x3ff);
-	flushi((long)&sparc64_vpte_patchme1[0]);
+	swapper_pgd_zero = pgd_val(swapper_pg_dir[0]);
 	
-	/* Setup bootmem... */
-	pages_avail = 0;
-	last_valid_pfn = end_pfn = bootmem_init(&pages_avail);
-
-	/* Inherit non-locked OBP mappings. */
 	inherit_prom_mappings();
 	
 	/* Ok, we can use our TLB miss and window trap handlers safely.
@@ -1527,13 +1502,16 @@ void __init paging_init(void)
 
 	inherit_locked_prom_mappings(1);
 
-	/* We only created DTLB mapping of this stuff. */
-	spitfire_flush_dtlb_nucleus_page(alias_base);
-	if (second_alias_page)
-		spitfire_flush_dtlb_nucleus_page(second_alias_page);
-
 	__flush_tlb_all();
 
+	/* Setup bootmem... */
+	pages_avail = 0;
+	last_valid_pfn = end_pfn = bootmem_init(&pages_avail);
+
+#ifdef CONFIG_DEBUG_PAGEALLOC
+	kernel_physical_mapping_init();
+#endif
+
 	{
 		unsigned long zones_size[MAX_NR_ZONES];
 		unsigned long zholes_size[MAX_NR_ZONES];
@@ -1554,128 +1532,35 @@ void __init paging_init(void)
 	device_scan();
 }
 
-/* Ok, it seems that the prom can allocate some more memory chunks
- * as a side effect of some prom calls we perform during the
- * boot sequence.  My most likely theory is that it is from the
- * prom_set_traptable() call, and OBP is allocating a scratchpad
- * for saving client program register state etc.
- */
-static void __init sort_memlist(struct linux_mlist_p1275 *thislist)
-{
-	int swapi = 0;
-	int i, mitr;
-	unsigned long tmpaddr, tmpsize;
-	unsigned long lowest;
-
-	for (i = 0; thislist[i].theres_more != 0; i++) {
-		lowest = thislist[i].start_adr;
-		for (mitr = i+1; thislist[mitr-1].theres_more != 0; mitr++)
-			if (thislist[mitr].start_adr < lowest) {
-				lowest = thislist[mitr].start_adr;
-				swapi = mitr;
-			}
-		if (lowest == thislist[i].start_adr)
-			continue;
-		tmpaddr = thislist[swapi].start_adr;
-		tmpsize = thislist[swapi].num_bytes;
-		for (mitr = swapi; mitr > i; mitr--) {
-			thislist[mitr].start_adr = thislist[mitr-1].start_adr;
-			thislist[mitr].num_bytes = thislist[mitr-1].num_bytes;
-		}
-		thislist[i].start_adr = tmpaddr;
-		thislist[i].num_bytes = tmpsize;
-	}
-}
-
-void __init rescan_sp_banks(void)
-{
-	struct linux_prom64_registers memlist[64];
-	struct linux_mlist_p1275 avail[64], *mlist;
-	unsigned long bytes, base_paddr;
-	int num_regs, node = prom_finddevice("/memory");
-	int i;
-
-	num_regs = prom_getproperty(node, "available",
-				    (char *) memlist, sizeof(memlist));
-	num_regs = (num_regs / sizeof(struct linux_prom64_registers));
-	for (i = 0; i < num_regs; i++) {
-		avail[i].start_adr = memlist[i].phys_addr;
-		avail[i].num_bytes = memlist[i].reg_size;
-		avail[i].theres_more = &avail[i + 1];
-	}
-	avail[i - 1].theres_more = NULL;
-	sort_memlist(avail);
-
-	mlist = &avail[0];
-	i = 0;
-	bytes = mlist->num_bytes;
-	base_paddr = mlist->start_adr;
-  
-	sp_banks[0].base_addr = base_paddr;
-	sp_banks[0].num_bytes = bytes;
-
-	while (mlist->theres_more != NULL){
-		i++;
-		mlist = mlist->theres_more;
-		bytes = mlist->num_bytes;
-		if (i >= SPARC_PHYS_BANKS-1) {
-			printk ("The machine has more banks than "
-				"this kernel can support\n"
-				"Increase the SPARC_PHYS_BANKS "
-				"setting (currently %d)\n",
-				SPARC_PHYS_BANKS);
-			i = SPARC_PHYS_BANKS-1;
-			break;
-		}
-    
-		sp_banks[i].base_addr = mlist->start_adr;
-		sp_banks[i].num_bytes = mlist->num_bytes;
-	}
-
-	i++;
-	sp_banks[i].base_addr = 0xdeadbeefbeefdeadUL;
-	sp_banks[i].num_bytes = 0;
-
-	for (i = 0; sp_banks[i].num_bytes != 0; i++)
-		sp_banks[i].num_bytes &= PAGE_MASK;
-}
-
 static void __init taint_real_pages(void)
 {
-	struct sparc_phys_banks saved_sp_banks[SPARC_PHYS_BANKS];
 	int i;
 
-	for (i = 0; i < SPARC_PHYS_BANKS; i++) {
-		saved_sp_banks[i].base_addr =
-			sp_banks[i].base_addr;
-		saved_sp_banks[i].num_bytes =
-			sp_banks[i].num_bytes;
-	}
-
-	rescan_sp_banks();
+	read_obp_memory("available", &pavail_rescan[0], &pavail_rescan_ents);
 
-	/* Find changes discovered in the sp_bank rescan and
+	/* Find changes discovered in the physmem available rescan and
 	 * reserve the lost portions in the bootmem maps.
 	 */
-	for (i = 0; saved_sp_banks[i].num_bytes; i++) {
+	for (i = 0; i < pavail_ents; i++) {
 		unsigned long old_start, old_end;
 
-		old_start = saved_sp_banks[i].base_addr;
+		old_start = pavail[i].phys_addr;
 		old_end = old_start +
-			saved_sp_banks[i].num_bytes;
+			pavail[i].reg_size;
 		while (old_start < old_end) {
 			int n;
 
-			for (n = 0; sp_banks[n].num_bytes; n++) {
+			for (n = 0; pavail_rescan_ents; n++) {
 				unsigned long new_start, new_end;
 
-				new_start = sp_banks[n].base_addr;
-				new_end = new_start + sp_banks[n].num_bytes;
+				new_start = pavail_rescan[n].phys_addr;
+				new_end = new_start +
+					pavail_rescan[n].reg_size;
 
 				if (new_start <= old_start &&
 				    new_end >= (old_start + PAGE_SIZE)) {
-					set_bit (old_start >> 22,
-						 sparc64_valid_addr_bitmap);
+					set_bit(old_start >> 22,
+						sparc64_valid_addr_bitmap);
 					goto do_next_page;
 				}
 			}
@@ -1695,8 +1580,7 @@ void __init mem_init(void)
 
 	i = last_valid_pfn >> ((22 - PAGE_SHIFT) + 6);
 	i += 1;
-	sparc64_valid_addr_bitmap = (unsigned long *)
-		__alloc_bootmem(i << 3, SMP_CACHE_BYTES, bootmap_base);
+	sparc64_valid_addr_bitmap = (unsigned long *) alloc_bootmem(i << 3);
 	if (sparc64_valid_addr_bitmap == NULL) {
 		prom_printf("mem_init: Cannot alloc valid_addr_bitmap.\n");
 		prom_halt();
@@ -1749,7 +1633,7 @@ void __init mem_init(void)
 		cheetah_ecache_flush_init();
 }
 
-void free_initmem (void)
+void free_initmem(void)
 {
 	unsigned long addr, initend;
 
diff --git a/arch/sparc64/mm/tlb.c b/arch/sparc64/mm/tlb.c
index 90ca99d0b89c..8b104be4662b 100644
--- a/arch/sparc64/mm/tlb.c
+++ b/arch/sparc64/mm/tlb.c
@@ -18,8 +18,7 @@
 
 /* Heavily inspired by the ppc64 code.  */
 
-DEFINE_PER_CPU(struct mmu_gather, mmu_gathers) =
-	{ NULL, 0, 0, 0, 0, 0, { 0 }, { NULL }, };
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers) = { 0, };
 
 void flush_tlb_pending(void)
 {
@@ -72,7 +71,7 @@ void tlb_batch_add(struct mm_struct *mm, unsigned long vaddr, pte_t *ptep, pte_t
 
 no_cache_flush:
 
-	if (mp->tlb_frozen)
+	if (mp->fullmm)
 		return;
 
 	nr = mp->tlb_nr;
@@ -97,7 +96,7 @@ void flush_tlb_pgtables(struct mm_struct *mm, unsigned long start, unsigned long
 	unsigned long nr = mp->tlb_nr;
 	long s = start, e = end, vpte_base;
 
-	if (mp->tlb_frozen)
+	if (mp->fullmm)
 		return;
 
 	/* If start is greater than end, that is a real problem.  */
diff --git a/arch/sparc64/mm/ultra.S b/arch/sparc64/mm/ultra.S
index b2ee9b53227f..e4c9151fa116 100644
--- a/arch/sparc64/mm/ultra.S
+++ b/arch/sparc64/mm/ultra.S
@@ -144,42 +144,29 @@ __flush_icache_page:	/* %o0 = phys_page */
 
 #define DTAG_MASK 0x3
 
+	/* This routine is Spitfire specific so the hardcoded
+	 * D-cache size and line-size are OK.
+	 */
 	.align		64
 	.globl		__flush_dcache_page
 __flush_dcache_page:	/* %o0=kaddr, %o1=flush_icache */
 	sethi		%uhi(PAGE_OFFSET), %g1
 	sllx		%g1, 32, %g1
-	sub		%o0, %g1, %o0
-	clr		%o4
-	srlx		%o0, 11, %o0
-	sethi		%hi(1 << 14), %o2
-1:	ldxa		[%o4] ASI_DCACHE_TAG, %o3	! LSU	Group
-	add		%o4, (1 << 5), %o4		! IEU0
-	ldxa		[%o4] ASI_DCACHE_TAG, %g1	! LSU	Group
-	add		%o4, (1 << 5), %o4		! IEU0
-	ldxa		[%o4] ASI_DCACHE_TAG, %g2	! LSU	Group	o3 available
-	add		%o4, (1 << 5), %o4		! IEU0
-	andn		%o3, DTAG_MASK, %o3		! IEU1
-	ldxa		[%o4] ASI_DCACHE_TAG, %g3	! LSU	Group
-	add		%o4, (1 << 5), %o4		! IEU0
-	andn		%g1, DTAG_MASK, %g1		! IEU1
-	cmp		%o0, %o3			! IEU1	Group
-	be,a,pn		%xcc, dflush1			! CTI
-	 sub		%o4, (4 << 5), %o4		! IEU0	(Group)
-	cmp		%o0, %g1			! IEU1	Group
-	andn		%g2, DTAG_MASK, %g2		! IEU0
-	be,a,pn		%xcc, dflush2			! CTI
-	 sub		%o4, (3 << 5), %o4		! IEU0	(Group)
-	cmp		%o0, %g2			! IEU1	Group
-	andn		%g3, DTAG_MASK, %g3		! IEU0
-	be,a,pn		%xcc, dflush3			! CTI
-	 sub		%o4, (2 << 5), %o4		! IEU0	(Group)
-	cmp		%o0, %g3			! IEU1	Group
-	be,a,pn		%xcc, dflush4			! CTI
-	 sub		%o4, (1 << 5), %o4		! IEU0
-2:	cmp		%o4, %o2			! IEU1	Group
-	bne,pt		%xcc, 1b			! CTI
-	 nop						! IEU0
+	sub		%o0, %g1, %o0			! physical address
+	srlx		%o0, 11, %o0			! make D-cache TAG
+	sethi		%hi(1 << 14), %o2		! D-cache size
+	sub		%o2, (1 << 5), %o2		! D-cache line size
+1:	ldxa		[%o2] ASI_DCACHE_TAG, %o3	! load D-cache TAG
+	andcc		%o3, DTAG_MASK, %g0		! Valid?
+	be,pn		%xcc, 2f			! Nope, branch
+	 andn		%o3, DTAG_MASK, %o3		! Clear valid bits
+	cmp		%o3, %o0			! TAG match?
+	bne,pt		%xcc, 2f			! Nope, branch
+	 nop
+	stxa		%g0, [%o2] ASI_DCACHE_TAG	! Invalidate TAG
+	membar		#Sync
+2:	brnz,pt		%o2, 1b
+	 sub		%o2, (1 << 5), %o2		! D-cache line size
 
 	/* The I-cache does not snoop local stores so we
 	 * better flush that too when necessary.
@@ -189,48 +176,9 @@ __flush_dcache_page:	/* %o0=kaddr, %o1=flush_icache */
 	retl
 	 nop
 
-dflush1:stxa		%g0, [%o4] ASI_DCACHE_TAG
-	add		%o4, (1 << 5), %o4
-dflush2:stxa		%g0, [%o4] ASI_DCACHE_TAG
-	add		%o4, (1 << 5), %o4
-dflush3:stxa		%g0, [%o4] ASI_DCACHE_TAG
-	add		%o4, (1 << 5), %o4
-dflush4:stxa		%g0, [%o4] ASI_DCACHE_TAG
-	add		%o4, (1 << 5), %o4
-	membar		#Sync
-	ba,pt		%xcc, 2b
-	 nop
 #endif /* DCACHE_ALIASING_POSSIBLE */
 
-	.previous .text
-	.align		32
-__prefill_dtlb:
-	rdpr		%pstate, %g7
-	wrpr		%g7, PSTATE_IE, %pstate
-	mov		TLB_TAG_ACCESS, %g1
-	stxa		%o5, [%g1] ASI_DMMU
-	stxa		%o2, [%g0] ASI_DTLB_DATA_IN
-	flush		%g6
-	retl
-	 wrpr		%g7, %pstate
-__prefill_itlb:
-	rdpr		%pstate, %g7
-	wrpr		%g7, PSTATE_IE, %pstate
-	mov		TLB_TAG_ACCESS, %g1
-	stxa		%o5, [%g1] ASI_IMMU
-	stxa		%o2, [%g0] ASI_ITLB_DATA_IN
-	flush		%g6
-	retl
-	 wrpr		%g7, %pstate
-
-	.globl		__update_mmu_cache
-__update_mmu_cache:	/* %o0=hw_context, %o1=address, %o2=pte, %o3=fault_code */
-	srlx		%o1, PAGE_SHIFT, %o1
-	andcc		%o3, FAULT_CODE_DTLB, %g0
-	sllx		%o1, PAGE_SHIFT, %o5
-	bne,pt		%xcc, __prefill_dtlb
-	 or		%o5, %o0, %o5
-	ba,a,pt		%xcc, __prefill_itlb
+	.previous
 
 	/* Cheetah specific versions, patched at boot time. */
 __cheetah_flush_tlb_mm: /* 18 insns */
@@ -283,7 +231,7 @@ __cheetah_flush_tlb_pending:	/* 26 insns */
 	 wrpr		%g7, 0x0, %pstate
 
 #ifdef DCACHE_ALIASING_POSSIBLE
-flush_dcpage_cheetah: /* 11 insns */
+__cheetah_flush_dcache_page: /* 11 insns */
 	sethi		%uhi(PAGE_OFFSET), %g1
 	sllx		%g1, 32, %g1
 	sub		%o0, %g1, %o0
@@ -329,8 +277,8 @@ cheetah_patch_cachetlbops:
 #ifdef DCACHE_ALIASING_POSSIBLE
 	sethi		%hi(__flush_dcache_page), %o0
 	or		%o0, %lo(__flush_dcache_page), %o0
-	sethi		%hi(flush_dcpage_cheetah), %o1
-	or		%o1, %lo(flush_dcpage_cheetah), %o1
+	sethi		%hi(__cheetah_flush_dcache_page), %o1
+	or		%o1, %lo(__cheetah_flush_dcache_page), %o1
 	call		cheetah_patch_one
 	 mov		11, %o2
 #endif /* DCACHE_ALIASING_POSSIBLE */
@@ -505,22 +453,6 @@ xcall_flush_dcache_page_spitfire: /* %g1 == physical page address
 	nop
 	nop
 
-	.globl		xcall_promstop
-xcall_promstop:
-	rdpr		%pstate, %g2
-	wrpr		%g2, PSTATE_IG | PSTATE_AG, %pstate
-	rdpr		%pil, %g2
-	wrpr		%g0, 15, %pil
-	sethi		%hi(109f), %g7
-	b,pt		%xcc, etrap_irq
-109:	 or		%g7, %lo(109b), %g7
-	flushw
-	call		prom_stopself
-	 nop
-	/* We should not return, just spin if we do... */
-1:	b,a,pt		%xcc, 1b
-	nop
-
 	.data
 
 errata32_hwbug:
diff --git a/arch/sparc64/oprofile/Kconfig b/arch/sparc64/oprofile/Kconfig
index 5ade19801b97..d8a84088471a 100644
--- a/arch/sparc64/oprofile/Kconfig
+++ b/arch/sparc64/oprofile/Kconfig
@@ -1,7 +1,3 @@
-
-menu "Profiling support"
-	depends on EXPERIMENTAL
-
 config PROFILING
 	bool "Profiling support (EXPERIMENTAL)"
 	help
@@ -19,5 +15,3 @@ config OPROFILE
 
 	  If unsure, say N.
 
-endmenu
-
diff --git a/arch/sparc64/prom/Makefile b/arch/sparc64/prom/Makefile
index 8f2420d9e9e6..3d33ed27bc27 100644
--- a/arch/sparc64/prom/Makefile
+++ b/arch/sparc64/prom/Makefile
@@ -6,5 +6,5 @@
 EXTRA_AFLAGS := -ansi
 EXTRA_CFLAGS := -Werror
 
-lib-y   := bootstr.o devops.o init.o memory.o misc.o \
-	   tree.o console.o printf.o p1275.o map.o cif.o
+lib-y   := bootstr.o devops.o init.o misc.o \
+	   tree.o console.o printf.o p1275.o cif.o
diff --git a/arch/sparc64/prom/console.c b/arch/sparc64/prom/console.c
index 028a53fcb1ec..eae5db8dda56 100644
--- a/arch/sparc64/prom/console.c
+++ b/arch/sparc64/prom/console.c
@@ -67,7 +67,7 @@ prom_putchar(char c)
 }
 
 void
-prom_puts(char *s, int len)
+prom_puts(const char *s, int len)
 {
 	p1275_cmd("write", P1275_ARG(1,P1275_ARG_IN_BUF)|
 			   P1275_INOUT(3,1),
diff --git a/arch/sparc64/prom/devops.c b/arch/sparc64/prom/devops.c
index 2c99b21b6981..4641839eb39a 100644
--- a/arch/sparc64/prom/devops.c
+++ b/arch/sparc64/prom/devops.c
@@ -16,7 +16,7 @@
  * Returns 0 on failure.
  */
 int
-prom_devopen(char *dstr)
+prom_devopen(const char *dstr)
 {
 	return p1275_cmd ("open", P1275_ARG(0,P1275_ARG_IN_STRING)|
 				  P1275_INOUT(1,1),
diff --git a/arch/sparc64/prom/init.c b/arch/sparc64/prom/init.c
index 817faae058cd..f3cc2d8578b2 100644
--- a/arch/sparc64/prom/init.c
+++ b/arch/sparc64/prom/init.c
@@ -27,7 +27,6 @@ int prom_chosen_node;
  * failure.  It gets passed the pointer to the PROM vector.
  */
 
-extern void prom_meminit(void);
 extern void prom_cif_init(void *, void *);
 
 void __init prom_init(void *cif_handler, void *cif_stack)
@@ -46,7 +45,7 @@ void __init prom_init(void *cif_handler, void *cif_stack)
 	if((prom_root_node == 0) || (prom_root_node == -1))
 		prom_halt();
 
-	prom_chosen_node = prom_finddevice("/chosen");
+	prom_chosen_node = prom_finddevice(prom_chosen_path);
 	if (!prom_chosen_node || prom_chosen_node == -1)
 		prom_halt();
 
@@ -90,8 +89,6 @@ void __init prom_init(void *cif_handler, void *cif_stack)
 
 	printk ("PROMLIB: Sun IEEE Boot Prom %s\n", buffer + bufadjust);
 
-	prom_meminit();
-
 	/* Initialization successful. */
 	return;
 
diff --git a/arch/sparc64/prom/map.S b/arch/sparc64/prom/map.S
deleted file mode 100644
index 21b3f9c99ea7..000000000000
--- a/arch/sparc64/prom/map.S
+++ /dev/null
@@ -1,72 +0,0 @@
-/* $Id: map.S,v 1.2 1999/11/19 05:53:02 davem Exp $
- * map.S: Tricky coding required to fixup the kernel OBP maps
- *	  properly.
- *
- * Copyright (C) 1999 David S. Miller (davem@redhat.com)
- */
-
-	.text
-	.align	8192
-	.globl	prom_boot_page
-prom_boot_page:
-call_method:
-	.asciz	"call-method"
-	.align	8
-map:
-	.asciz	"map"
-	.align	8
-
-	/* When we are invoked, our caller has remapped us to
-	 * page zero, therefore we must use PC relative addressing
-	 * for everything after we begin performing the unmap/map
-	 * calls.
-	 */
-	.globl	prom_remap
-prom_remap:	/* %o0 = physpage, %o1 = virtpage, %o2 = mmu_ihandle */
-	rd	%pc, %g1
-	srl	%o2, 0, %o2			! kill sign extension
-	sethi	%hi(p1275buf), %g2
-	or	%g2, %lo(p1275buf), %g2
-	ldx	[%g2 + 0x10], %g3		! prom_cif_stack
-	save	%g3, -(192 + 128), %sp
-	ldx	[%g2 + 0x08], %l0		! prom_cif_handler
-	mov	%g6, %i3
-	mov	%g4, %i4
-	mov	%g5, %i5
-	flushw
-
-	sethi	%hi(prom_remap - call_method), %g7
-	or	%g7, %lo(prom_remap - call_method), %g7
-	sub	%g1, %g7, %l2			! call-method string
-	sethi	%hi(prom_remap - map), %g7
-	or	%g7, %lo(prom_remap - map), %g7
-	sub	%g1, %g7, %l4			! map string
-
-	/* OK, map the 4MB region we really live at. */
-	stx	%l2, [%sp + 2047 + 128 + 0x00]	! call-method
-	mov	7, %l5
-	stx	%l5, [%sp + 2047 + 128 + 0x08]	! num_args
-	mov	1, %l5
-	stx	%l5, [%sp + 2047 + 128 + 0x10]	! num_rets
-	stx	%l4, [%sp + 2047 + 128 + 0x18]	! map
-	stx	%i2, [%sp + 2047 + 128 + 0x20]	! mmu_ihandle
-	mov	-1, %l5
-	stx	%l5, [%sp + 2047 + 128 + 0x28]	! mode == default
-	sethi	%hi(4 * 1024 * 1024), %l5
-	stx	%l5, [%sp + 2047 + 128 + 0x30]	! size
-	stx	%i1, [%sp + 2047 + 128 + 0x38]	! vaddr
-	stx	%g0, [%sp + 2047 + 128 + 0x40]	! filler
-	stx	%i0, [%sp + 2047 + 128 + 0x48]	! paddr
-	call	%l0
-	 add	%sp, (2047 + 128), %o0		! argument array
-
-	/* Restore hard-coded globals. */
-	mov	%i3, %g6
-	mov	%i4, %g4
-	mov	%i5, %g5
-
-	/* Wheee.... we are done. */
-	ret
-	restore
-
-	.align	8192
diff --git a/arch/sparc64/prom/memory.c b/arch/sparc64/prom/memory.c
deleted file mode 100644
index f4a8143e052c..000000000000
--- a/arch/sparc64/prom/memory.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/* $Id: memory.c,v 1.5 1999/08/31 06:55:04 davem Exp $
- * memory.c: Prom routine for acquiring various bits of information
- *           about RAM on the machine, both virtual and physical.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/openprom.h>
-#include <asm/oplib.h>
-
-/* This routine, for consistency, returns the ram parameters in the
- * V0 prom memory descriptor format.  I choose this format because I
- * think it was the easiest to work with.  I feel the religious
- * arguments now... ;)  Also, I return the linked lists sorted to
- * prevent paging_init() upset stomach as I have not yet written
- * the pepto-bismol kernel module yet.
- */
-
-struct linux_prom64_registers prom_reg_memlist[64];
-struct linux_prom64_registers prom_reg_tmp[64];
-
-struct linux_mlist_p1275 prom_phys_total[64];
-struct linux_mlist_p1275 prom_prom_taken[64];
-struct linux_mlist_p1275 prom_phys_avail[64];
-
-struct linux_mlist_p1275 *prom_ptot_ptr = prom_phys_total;
-struct linux_mlist_p1275 *prom_ptak_ptr = prom_prom_taken;
-struct linux_mlist_p1275 *prom_pavl_ptr = prom_phys_avail;
-
-struct linux_mem_p1275 prom_memlist;
-
-
-/* Internal Prom library routine to sort a linux_mlist_p1275 memory
- * list.  Used below in initialization.
- */
-static void __init
-prom_sortmemlist(struct linux_mlist_p1275 *thislist)
-{
-	int swapi = 0;
-	int i, mitr;
-	unsigned long tmpaddr, tmpsize;
-	unsigned long lowest;
-
-	for(i=0; thislist[i].theres_more; i++) {
-		lowest = thislist[i].start_adr;
-		for(mitr = i+1; thislist[mitr-1].theres_more; mitr++)
-			if(thislist[mitr].start_adr < lowest) {
-				lowest = thislist[mitr].start_adr;
-				swapi = mitr;
-			}
-		if(lowest == thislist[i].start_adr) continue;
-		tmpaddr = thislist[swapi].start_adr;
-		tmpsize = thislist[swapi].num_bytes;
-		for(mitr = swapi; mitr > i; mitr--) {
-			thislist[mitr].start_adr = thislist[mitr-1].start_adr;
-			thislist[mitr].num_bytes = thislist[mitr-1].num_bytes;
-		}
-		thislist[i].start_adr = tmpaddr;
-		thislist[i].num_bytes = tmpsize;
-	}
-}
-
-/* Initialize the memory lists based upon the prom version. */
-void __init prom_meminit(void)
-{
-	int node = 0;
-	unsigned int iter, num_regs;
-
-	node = prom_finddevice("/memory");
-	num_regs = prom_getproperty(node, "available",
-				    (char *) prom_reg_memlist,
-				    sizeof(prom_reg_memlist));
-	num_regs = (num_regs/sizeof(struct linux_prom64_registers));
-	for(iter=0; iter<num_regs; iter++) {
-		prom_phys_avail[iter].start_adr =
-			prom_reg_memlist[iter].phys_addr;
-		prom_phys_avail[iter].num_bytes =
-			prom_reg_memlist[iter].reg_size;
-		prom_phys_avail[iter].theres_more =
-			&prom_phys_avail[iter+1];
-	}
-	prom_phys_avail[iter-1].theres_more = NULL;
-
-	num_regs = prom_getproperty(node, "reg",
-				    (char *) prom_reg_memlist,
-				    sizeof(prom_reg_memlist));
-	num_regs = (num_regs/sizeof(struct linux_prom64_registers));
-	for(iter=0; iter<num_regs; iter++) {
-		prom_phys_total[iter].start_adr =
-			prom_reg_memlist[iter].phys_addr;
-		prom_phys_total[iter].num_bytes =
-			prom_reg_memlist[iter].reg_size;
-		prom_phys_total[iter].theres_more =
-			&prom_phys_total[iter+1];
-	}
-	prom_phys_total[iter-1].theres_more = NULL;
-
-	node = prom_finddevice("/virtual-memory");
-	num_regs = prom_getproperty(node, "available",
-				    (char *) prom_reg_memlist,
-				    sizeof(prom_reg_memlist));
-	num_regs = (num_regs/sizeof(struct linux_prom64_registers));
-
-	/* Convert available virtual areas to taken virtual
-	 * areas.  First sort, then convert.
-	 */
-	for(iter=0; iter<num_regs; iter++) {
-		prom_prom_taken[iter].start_adr =
-			prom_reg_memlist[iter].phys_addr;
-		prom_prom_taken[iter].num_bytes =
-			prom_reg_memlist[iter].reg_size;
-		prom_prom_taken[iter].theres_more =
-			&prom_prom_taken[iter+1];
-	}
-	prom_prom_taken[iter-1].theres_more = NULL;
-
-	prom_sortmemlist(prom_prom_taken);
-
-	/* Finally, convert. */
-	for(iter=0; iter<num_regs; iter++) {
-		prom_prom_taken[iter].start_adr =
-			prom_prom_taken[iter].start_adr +
-			prom_prom_taken[iter].num_bytes;
-		prom_prom_taken[iter].num_bytes =
-			prom_prom_taken[iter+1].start_adr -
-			prom_prom_taken[iter].start_adr;
-	}
-	prom_prom_taken[iter-1].num_bytes =
-		-1UL - prom_prom_taken[iter-1].start_adr;
-
-	/* Sort the other two lists. */
-	prom_sortmemlist(prom_phys_total);
-	prom_sortmemlist(prom_phys_avail);
-
-	/* Link all the lists into the top-level descriptor. */
-	prom_memlist.p1275_totphys=&prom_ptot_ptr;
-	prom_memlist.p1275_prommap=&prom_ptak_ptr;
-	prom_memlist.p1275_available=&prom_pavl_ptr;
-}
-
-/* This returns a pointer to our libraries internal p1275 format
- * memory descriptor.
- */
-struct linux_mem_p1275 *
-prom_meminfo(void)
-{
-	return &prom_memlist;
-}
diff --git a/arch/sparc64/prom/misc.c b/arch/sparc64/prom/misc.c
index 19c44e97e9ee..87f5cfce23bb 100644
--- a/arch/sparc64/prom/misc.c
+++ b/arch/sparc64/prom/misc.c
@@ -17,14 +17,14 @@
 #include <asm/system.h>
 
 /* Reset and reboot the machine with the command 'bcommand'. */
-void prom_reboot(char *bcommand)
+void prom_reboot(const char *bcommand)
 {
 	p1275_cmd("boot", P1275_ARG(0, P1275_ARG_IN_STRING) |
 		  P1275_INOUT(1, 0), bcommand);
 }
 
 /* Forth evaluate the expression contained in 'fstring'. */
-void prom_feval(char *fstring)
+void prom_feval(const char *fstring)
 {
 	if (!fstring || fstring[0] == 0)
 		return;
@@ -68,19 +68,11 @@ void prom_cmdline(void)
 	local_irq_restore(flags);
 }
 
-#ifdef CONFIG_SMP
-extern void smp_promstop_others(void);
-#endif
-
 /* Drop into the prom, but completely terminate the program.
  * No chance of continuing.
  */
 void prom_halt(void)
 {
-#ifdef CONFIG_SMP
-	smp_promstop_others();
-	udelay(8000);
-#endif
 again:
 	p1275_cmd("exit", P1275_INOUT(0, 0));
 	goto again; /* PROM is out to get me -DaveM */
@@ -88,10 +80,6 @@ again:
 
 void prom_halt_power_off(void)
 {
-#ifdef CONFIG_SMP
-	smp_promstop_others();
-	udelay(8000);
-#endif
 	p1275_cmd("SUNW,power-off", P1275_INOUT(0, 0));
 
 	/* if nothing else helps, we just halt */
@@ -148,21 +136,19 @@ void prom_set_trap_table(unsigned long tba)
 	p1275_cmd("SUNW,set-trap-table", P1275_INOUT(1, 0), tba);
 }
 
-int mmu_ihandle_cache = 0;
-
 int prom_get_mmu_ihandle(void)
 {
 	int node, ret;
 
-	if (mmu_ihandle_cache != 0)
-		return mmu_ihandle_cache;
+	if (prom_mmu_ihandle_cache != 0)
+		return prom_mmu_ihandle_cache;
 
-	node = prom_finddevice("/chosen");
-	ret = prom_getint(node, "mmu");
+	node = prom_finddevice(prom_chosen_path);
+	ret = prom_getint(node, prom_mmu_name);
 	if (ret == -1 || ret == 0)
-		mmu_ihandle_cache = -1;
+		prom_mmu_ihandle_cache = -1;
 	else
-		mmu_ihandle_cache = ret;
+		prom_mmu_ihandle_cache = ret;
 
 	return ret;
 }
@@ -190,7 +176,7 @@ long prom_itlb_load(unsigned long index,
 		    unsigned long tte_data,
 		    unsigned long vaddr)
 {
-	return p1275_cmd("call-method",
+	return p1275_cmd(prom_callmethod_name,
 			 (P1275_ARG(0, P1275_ARG_IN_STRING) |
 			  P1275_ARG(2, P1275_ARG_IN_64B) |
 			  P1275_ARG(3, P1275_ARG_IN_64B) |
@@ -207,7 +193,7 @@ long prom_dtlb_load(unsigned long index,
 		    unsigned long tte_data,
 		    unsigned long vaddr)
 {
-	return p1275_cmd("call-method",
+	return p1275_cmd(prom_callmethod_name,
 			 (P1275_ARG(0, P1275_ARG_IN_STRING) |
 			  P1275_ARG(2, P1275_ARG_IN_64B) |
 			  P1275_ARG(3, P1275_ARG_IN_64B) |
@@ -223,13 +209,13 @@ long prom_dtlb_load(unsigned long index,
 int prom_map(int mode, unsigned long size,
 	     unsigned long vaddr, unsigned long paddr)
 {
-	int ret = p1275_cmd("call-method",
+	int ret = p1275_cmd(prom_callmethod_name,
 			    (P1275_ARG(0, P1275_ARG_IN_STRING) |
 			     P1275_ARG(3, P1275_ARG_IN_64B) |
 			     P1275_ARG(4, P1275_ARG_IN_64B) |
 			     P1275_ARG(6, P1275_ARG_IN_64B) |
 			     P1275_INOUT(7, 1)),
-			    "map",
+			    prom_map_name,
 			    prom_get_mmu_ihandle(),
 			    mode,
 			    size,
@@ -244,12 +230,12 @@ int prom_map(int mode, unsigned long size,
 
 void prom_unmap(unsigned long size, unsigned long vaddr)
 {
-	p1275_cmd("call-method",
+	p1275_cmd(prom_callmethod_name,
 		  (P1275_ARG(0, P1275_ARG_IN_STRING) |
 		   P1275_ARG(2, P1275_ARG_IN_64B) |
 		   P1275_ARG(3, P1275_ARG_IN_64B) |
 		   P1275_INOUT(4, 0)),
-		  "unmap",
+		  prom_unmap_name,
 		  prom_get_mmu_ihandle(),
 		  size,
 		  vaddr);
@@ -258,7 +244,7 @@ void prom_unmap(unsigned long size, unsigned long vaddr)
 /* Set aside physical memory which is not touched or modified
  * across soft resets.
  */
-unsigned long prom_retain(char *name,
+unsigned long prom_retain(const char *name,
 			  unsigned long pa_low, unsigned long pa_high,
 			  long size, long align)
 {
@@ -290,7 +276,7 @@ int prom_getunumber(int syndrome_code,
 		    unsigned long phys_addr,
 		    char *buf, int buflen)
 {
-	return p1275_cmd("call-method",
+	return p1275_cmd(prom_callmethod_name,
 			 (P1275_ARG(0, P1275_ARG_IN_STRING)	|
 			  P1275_ARG(3, P1275_ARG_OUT_BUF)	|
 			  P1275_ARG(6, P1275_ARG_IN_64B)	|
diff --git a/arch/sparc64/prom/p1275.c b/arch/sparc64/prom/p1275.c
index 59fe38bba39e..a5a7c5712028 100644
--- a/arch/sparc64/prom/p1275.c
+++ b/arch/sparc64/prom/p1275.c
@@ -46,7 +46,7 @@ static inline unsigned long spitfire_get_primary_context(void)
  */
 DEFINE_SPINLOCK(prom_entry_lock);
 
-long p1275_cmd (char *service, long fmt, ...)
+long p1275_cmd(const char *service, long fmt, ...)
 {
 	char *p, *q;
 	unsigned long flags;
diff --git a/arch/sparc64/prom/printf.c b/arch/sparc64/prom/printf.c
index a6df82cafa0d..660943ee4c2a 100644
--- a/arch/sparc64/prom/printf.c
+++ b/arch/sparc64/prom/printf.c
@@ -34,7 +34,7 @@ prom_write(const char *buf, unsigned int n)
 }
 
 void
-prom_printf(char *fmt, ...)
+prom_printf(const char *fmt, ...)
 {
 	va_list args;
 	int i;
diff --git a/arch/sparc64/prom/tree.c b/arch/sparc64/prom/tree.c
index ccf73258ebf7..b1ff9e87dcc6 100644
--- a/arch/sparc64/prom/tree.c
+++ b/arch/sparc64/prom/tree.c
@@ -69,7 +69,7 @@ prom_getsibling(int node)
  * Return -1 on error.
  */
 __inline__ int
-prom_getproplen(int node, char *prop)
+prom_getproplen(int node, const char *prop)
 {
 	if((!node) || (!prop)) return -1;
 	return p1275_cmd ("getproplen", 
@@ -83,20 +83,20 @@ prom_getproplen(int node, char *prop)
  * was successful the length will be returned, else -1 is returned.
  */
 __inline__ int
-prom_getproperty(int node, char *prop, char *buffer, int bufsize)
+prom_getproperty(int node, const char *prop, char *buffer, int bufsize)
 {
 	int plen;
 
 	plen = prom_getproplen(node, prop);
-	if((plen > bufsize) || (plen == 0) || (plen == -1))
+	if ((plen > bufsize) || (plen == 0) || (plen == -1)) {
 		return -1;
-	else {
+	} else {
 		/* Ok, things seem all right. */
-		return p1275_cmd ("getprop", 
-				  P1275_ARG(1,P1275_ARG_IN_STRING)|
-				  P1275_ARG(2,P1275_ARG_OUT_BUF)|
-				  P1275_INOUT(4, 1), 
-				  node, prop, buffer, P1275_SIZE(plen));
+		return p1275_cmd(prom_getprop_name, 
+				 P1275_ARG(1,P1275_ARG_IN_STRING)|
+				 P1275_ARG(2,P1275_ARG_OUT_BUF)|
+				 P1275_INOUT(4, 1), 
+				 node, prop, buffer, P1275_SIZE(plen));
 	}
 }
 
@@ -104,7 +104,7 @@ prom_getproperty(int node, char *prop, char *buffer, int bufsize)
  * on failure.
  */
 __inline__ int
-prom_getint(int node, char *prop)
+prom_getint(int node, const char *prop)
 {
 	int intprop;
 
@@ -119,7 +119,7 @@ prom_getint(int node, char *prop)
  */
 
 int
-prom_getintdefault(int node, char *property, int deflt)
+prom_getintdefault(int node, const char *property, int deflt)
 {
 	int retval;
 
@@ -131,7 +131,7 @@ prom_getintdefault(int node, char *property, int deflt)
 
 /* Acquire a boolean property, 1=TRUE 0=FALSE. */
 int
-prom_getbool(int node, char *prop)
+prom_getbool(int node, const char *prop)
 {
 	int retval;
 
@@ -145,7 +145,7 @@ prom_getbool(int node, char *prop)
  * buffer.
  */
 void
-prom_getstring(int node, char *prop, char *user_buf, int ubuf_size)
+prom_getstring(int node, const char *prop, char *user_buf, int ubuf_size)
 {
 	int len;
 
@@ -160,7 +160,7 @@ prom_getstring(int node, char *prop, char *user_buf, int ubuf_size)
  * YES = 1   NO = 0
  */
 int
-prom_nodematch(int node, char *name)
+prom_nodematch(int node, const char *name)
 {
 	char namebuf[128];
 	prom_getproperty(node, "name", namebuf, sizeof(namebuf));
@@ -172,7 +172,7 @@ prom_nodematch(int node, char *name)
  * 'nodename'.  Return node if successful, zero if not.
  */
 int
-prom_searchsiblings(int node_start, char *nodename)
+prom_searchsiblings(int node_start, const char *nodename)
 {
 
 	int thisnode, error;
@@ -294,7 +294,7 @@ prom_firstprop(int node, char *buffer)
  * property types for this node.
  */
 __inline__ char *
-prom_nextprop(int node, char *oprop, char *buffer)
+prom_nextprop(int node, const char *oprop, char *buffer)
 {
 	char buf[32];
 
@@ -314,15 +314,17 @@ prom_nextprop(int node, char *oprop, char *buffer)
 }
 
 int
-prom_finddevice(char *name)
+prom_finddevice(const char *name)
 {
-	if(!name) return 0;
-	return p1275_cmd ("finddevice", P1275_ARG(0,P1275_ARG_IN_STRING)|
-				        P1275_INOUT(1, 1), 
-				        name);
+	if (!name)
+		return 0;
+	return p1275_cmd(prom_finddev_name,
+			 P1275_ARG(0,P1275_ARG_IN_STRING)|
+			 P1275_INOUT(1, 1), 
+			 name);
 }
 
-int prom_node_has_property(int node, char *prop)
+int prom_node_has_property(int node, const char *prop)
 {
 	char buf [32];
         
@@ -339,7 +341,7 @@ int prom_node_has_property(int node, char *prop)
  * of 'size' bytes.  Return the number of bytes the prom accepted.
  */
 int
-prom_setprop(int node, char *pname, char *value, int size)
+prom_setprop(int node, const char *pname, char *value, int size)
 {
 	if(size == 0) return 0;
 	if((pname == 0) || (value == 0)) return 0;
@@ -364,7 +366,7 @@ prom_inst2pkg(int inst)
  * FIXME: Should work for v0 as well
  */
 int
-prom_pathtoinode(char *path)
+prom_pathtoinode(const char *path)
 {
 	int node, inst;
 
diff --git a/arch/sparc64/solaris/socksys.c b/arch/sparc64/solaris/socksys.c
index d7c1c76582cc..fc6669e8dde1 100644
--- a/arch/sparc64/solaris/socksys.c
+++ b/arch/sparc64/solaris/socksys.c
@@ -49,7 +49,7 @@ IPPROTO_EGP, IPPROTO_PUP, IPPROTO_UDP, IPPROTO_IDP, IPPROTO_RAW,
 
 #else
 
-extern void * mykmalloc(size_t s, int gfp);
+extern void * mykmalloc(size_t s, gfp_t gfp);
 extern void mykfree(void *);
 
 #endif
diff --git a/arch/sparc64/solaris/timod.c b/arch/sparc64/solaris/timod.c
index aaad29c35c83..b84e5456b025 100644
--- a/arch/sparc64/solaris/timod.c
+++ b/arch/sparc64/solaris/timod.c
@@ -39,7 +39,7 @@ static char * page = NULL ;
 
 #else
 
-void * mykmalloc(size_t s, int gfp)
+void * mykmalloc(size_t s, gfp_t gfp)
 {
 	static char * page;
 	static size_t free;
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
index 684e1f8b2755..563301fe5df8 100644
--- a/arch/um/Kconfig
+++ b/arch/um/Kconfig
@@ -7,7 +7,6 @@ config UML
 	bool
 	default y
 
-# XXX: does UM have a mmu/swap?
 config MMU
 	bool
 	default y
@@ -27,10 +26,6 @@ config UID16
 	bool
 	default y
 
-config RWSEM_GENERIC_SPINLOCK
-	bool
-	default y
-
 config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
@@ -63,6 +58,30 @@ config STATIC_LINK
 	chroot, and you disable CONFIG_MODE_TT, you probably want to say Y
 	here.
 
+config HOST_2G_2G
+	bool "2G/2G host address space split"
+	default n
+	depends on MODE_TT
+	help
+	This is needed when the host on which you run has a 2G/2G memory
+	split, instead of the customary 3G/1G.
+
+	Note that to enable such a host
+	configuration, which makes sense only in some cases, you need special
+	host patches.
+
+	So, if you do not know what to do here, say 'N'.
+
+config KERNEL_HALF_GIGS
+	int "Kernel address space size (in .5G units)"
+	default "1"
+	depends on MODE_TT
+	help
+        This determines the amount of address space that UML will allocate for
+        its own, measured in half Gigabyte units.  The default is 1.
+        Change this only if you need to boot UML with an unusually large amount
+        of physical memory.
+
 config MODE_SKAS
 	bool "Separate Kernel Address Space support"
 	default y
@@ -180,23 +199,11 @@ config MAGIC_SYSRQ
 	The keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
 	unless you really know what this hack does.
 
-config HOST_2G_2G
-	bool "2G/2G host address space split"
-	default n
-	help
-	This is needed when the host on which you run has a 2G/2G memory
-	split, instead of the customary 3G/1G.
-
-	Note that to enable such a host
-	configuration, which makes sense only in some cases, you need special
-	host patches.
-
-	So, if you do not know what to do here, say 'N'.
-
 config SMP
 	bool "Symmetric multi-processing support (EXPERIMENTAL)"
 	default n
-	depends on (MODE_TT && EXPERIMENTAL && !SMP_BROKEN) || (BROKEN && SMP_BROKEN)
+	#SMP_BROKEN is for x86_64.
+	depends on MODE_TT && EXPERIMENTAL && (!SMP_BROKEN || (BROKEN && SMP_BROKEN))
 	help
 	This option enables UML SMP support.
 	It is NOT related to having a real SMP box. Not directly, at least.
@@ -239,15 +246,6 @@ config NEST_LEVEL
         set to the host's CONFIG_NEST_LEVEL + CONFIG_KERNEL_HALF_GIGS.
         Only change this if you are running nested UMLs.
 
-config KERNEL_HALF_GIGS
-	int "Kernel address space size (in .5G units)"
-	default "1"
-	help
-        This determines the amount of address space that UML will allocate for
-        its own, measured in half Gigabyte units.  The default is 1.
-        Change this only if you need to boot UML with an unusually large amount
-        of physical memory.
-
 config HIGHMEM
 	bool "Highmem support"
 	depends on !64BIT
diff --git a/arch/um/Kconfig.i386 b/arch/um/Kconfig.i386
index 5d92cacd56c6..c71b39a677aa 100644
--- a/arch/um/Kconfig.i386
+++ b/arch/um/Kconfig.i386
@@ -1,3 +1,9 @@
+menu "Host processor type and features"
+
+source "arch/i386/Kconfig.cpu"
+
+endmenu
+
 config UML_X86
 	bool
 	default y
@@ -42,7 +48,3 @@ config ARCH_HAS_SC_SIGNALS
 config ARCH_REUSE_HOST_VSYSCALL_AREA
 	bool
 	default y
-
-config X86_CMPXCHG
-	bool
-	default y
diff --git a/arch/um/Kconfig.x86_64 b/arch/um/Kconfig.x86_64
index bd35e59419c8..aae19bc4b06a 100644
--- a/arch/um/Kconfig.x86_64
+++ b/arch/um/Kconfig.x86_64
@@ -6,6 +6,11 @@ config 64BIT
 	bool
 	default y
 
+#XXX: this is so in the underlying arch, but it's wrong!!!
+config RWSEM_GENERIC_SPINLOCK
+	bool
+	default y
+
 config SEMAPHORE_SLEEPERS
 	bool
 	default y
diff --git a/arch/um/Makefile b/arch/um/Makefile
index 5b5af95721ab..1b12feeba368 100644
--- a/arch/um/Makefile
+++ b/arch/um/Makefile
@@ -17,7 +17,7 @@ core-y			+= $(ARCH_DIR)/kernel/		\
 
 # Have to precede the include because the included Makefiles reference them.
 SYMLINK_HEADERS := archparam.h system.h sigcontext.h processor.h ptrace.h \
-	module.h vm-flags.h elf.h
+	module.h vm-flags.h elf.h ldt.h
 SYMLINK_HEADERS := $(foreach header,$(SYMLINK_HEADERS),include/asm-um/$(header))
 
 # XXX: The "os" symlink is only used by arch/um/include/os.h, which includes
@@ -28,8 +28,6 @@ SYMLINK_HEADERS := $(foreach header,$(SYMLINK_HEADERS),include/asm-um/$(header))
 ARCH_SYMLINKS = include/asm-um/arch $(ARCH_DIR)/include/sysdep $(ARCH_DIR)/os \
 	$(SYMLINK_HEADERS) $(ARCH_DIR)/include/uml-config.h
 
-GEN_HEADERS += $(ARCH_DIR)/include/task.h $(ARCH_DIR)/include/kern_constants.h
-
 um-modes-$(CONFIG_MODE_TT) += tt
 um-modes-$(CONFIG_MODE_SKAS) += skas
 
@@ -45,9 +43,7 @@ endif
 
 ARCH_INCLUDE	:= -I$(ARCH_DIR)/include
 ifneq ($(KBUILD_SRC),)
-ARCH_INCLUDE	+= -I$(ARCH_DIR)/include2
 ARCH_INCLUDE	+= -I$(srctree)/$(ARCH_DIR)/include
-MRPROPER_DIRS	+= $(ARCH_DIR)/include2
 endif
 SYS_DIR		:= $(ARCH_DIR)/include/sysdep-$(SUBARCH)
 
@@ -64,7 +60,7 @@ AFLAGS += $(ARCH_INCLUDE)
 
 USER_CFLAGS := $(patsubst -I%,,$(CFLAGS))
 USER_CFLAGS := $(patsubst -D__KERNEL__,,$(USER_CFLAGS)) $(ARCH_INCLUDE) \
-	$(MODE_INCLUDE)
+	$(MODE_INCLUDE) -D_FILE_OFFSET_BITS=64
 
 # -Derrno=kernel_errno - This turns all kernel references to errno into
 # kernel_errno to separate them from the libc errno.  This allows -fno-common
@@ -87,10 +83,6 @@ CONFIG_KERNEL_HALF_GIGS ?= 0
 
 SIZE = (($(CONFIG_NEST_LEVEL) + $(CONFIG_KERNEL_HALF_GIGS)) * 0x20000000)
 
-ifeq ($(CONFIG_MODE_SKAS), y)
-$(SYS_HEADERS) : $(ARCH_DIR)/include/skas_ptregs.h
-endif
-
 .PHONY: linux
 
 all: linux
@@ -111,7 +103,8 @@ else
 $(shell cd $(ARCH_DIR) && ln -sf Kconfig.$(SUBARCH) Kconfig.arch)
 endif
 
-archprepare: $(ARCH_SYMLINKS) $(SYS_HEADERS) $(GEN_HEADERS)
+archprepare: $(ARCH_SYMLINKS) $(ARCH_DIR)/include/user_constants.h
+prepare: $(ARCH_DIR)/include/kern_constants.h
 
 LINK-$(CONFIG_LD_SCRIPT_STATIC) += -static
 LINK-$(CONFIG_LD_SCRIPT_DYN) += -Wl,-rpath,/lib
@@ -146,22 +139,20 @@ endef
 #When cleaning we don't include .config, so we don't include
 #TT or skas makefiles and don't clean skas_ptregs.h.
 CLEAN_FILES += linux x.i gmon.out $(ARCH_DIR)/include/uml-config.h \
-	$(GEN_HEADERS) $(ARCH_DIR)/include/skas_ptregs.h \
-	$(ARCH_DIR)/include/user_constants.h $(ARCH_DIR)/Kconfig.arch
+	$(ARCH_DIR)/include/user_constants.h \
+	$(ARCH_DIR)/include/kern_constants.h $(ARCH_DIR)/Kconfig.arch
 
 MRPROPER_FILES += $(SYMLINK_HEADERS) $(ARCH_SYMLINKS) \
 	$(addprefix $(ARCH_DIR)/kernel/,$(KERN_SYMLINKS)) $(ARCH_DIR)/os
 
 archclean:
-	$(Q)$(MAKE) $(clean)=$(ARCH_DIR)/util
-	$(Q)$(MAKE) $(clean)=$(ARCH_DIR)/os-$(OS)/util
 	@find . \( -name '*.bb' -o -name '*.bbg' -o -name '*.da' \
 		-o -name '*.gcov' \) -type f -print | xargs rm -f
 
 $(SYMLINK_HEADERS):
 	@echo '  SYMLINK $@'
 ifneq ($(KBUILD_SRC),)
-	ln -fsn $(srctree)/include/asm-um/$(basename $(notdir $@))-$(SUBARCH)$(suffix $@) $@
+	$(Q)ln -fsn $(srctree)/include/asm-um/$(basename $(notdir $@))-$(SUBARCH)$(suffix $@) $@
 else
 	$(Q)cd $(TOPDIR)/$(dir $@) ; \
 	ln -sf $(basename $(notdir $@))-$(SUBARCH)$(suffix $@) $(notdir $@)
@@ -180,9 +171,7 @@ $(ARCH_DIR)/include/sysdep:
 	@echo '  SYMLINK $@'
 ifneq ($(KBUILD_SRC),)
 	$(Q)mkdir -p $(ARCH_DIR)/include
-	$(Q)mkdir -p $(ARCH_DIR)/include2
-	$(Q)ln -fsn sysdep-$(SUBARCH) $(ARCH_DIR)/include/sysdep
-	$(Q)ln -fsn $(srctree)/$(ARCH_DIR)/include/sysdep-$(SUBARCH) $(ARCH_DIR)/include2/sysdep
+	$(Q)ln -fsn $(srctree)/$(ARCH_DIR)/include/sysdep-$(SUBARCH) $(ARCH_DIR)/include/sysdep
 else
 	$(Q)cd $(ARCH_DIR)/include && ln -sf sysdep-$(SUBARCH) sysdep
 endif
@@ -202,8 +191,6 @@ endef
 
 define filechk_gen-asm-offsets
         (set -e; \
-         echo "#ifndef __ASM_OFFSETS_H__"; \
-         echo "#define __ASM_OFFSETS_H__"; \
          echo "/*"; \
          echo " * DO NOT MODIFY."; \
          echo " *"; \
@@ -212,8 +199,7 @@ define filechk_gen-asm-offsets
          echo " */"; \
          echo ""; \
          sed -ne "/^->/{s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; s:->::; p;}"; \
-         echo ""; \
-         echo "#endif" )
+         echo ""; )
 endef
 
 $(ARCH_DIR)/include/uml-config.h : include/linux/autoconf.h
@@ -222,50 +208,18 @@ $(ARCH_DIR)/include/uml-config.h : include/linux/autoconf.h
 $(ARCH_DIR)/user-offsets.s: $(ARCH_DIR)/sys-$(SUBARCH)/user-offsets.c
 	$(CC) $(USER_CFLAGS) -S -o $@ $<
 
-$(ARCH_DIR)/user-offsets.h: $(ARCH_DIR)/user-offsets.s
+$(ARCH_DIR)/include/user_constants.h: $(ARCH_DIR)/user-offsets.s
 	$(call filechk,gen-asm-offsets)
 
-CLEAN_FILES += $(ARCH_DIR)/user-offsets.s  $(ARCH_DIR)/user-offsets.h
+CLEAN_FILES += $(ARCH_DIR)/user-offsets.s
 
 $(ARCH_DIR)/kernel-offsets.s: $(ARCH_DIR)/sys-$(SUBARCH)/kernel-offsets.c \
-				   $(ARCH_SYMLINKS) \
-				   $(SYS_DIR)/sc.h \
-				   include/asm include/linux/version.h \
-				   include/config/MARKER \
-				   $(ARCH_DIR)/include/user_constants.h
+				   archprepare
 	$(CC) $(CFLAGS) $(NOSTDINC_FLAGS) $(CPPFLAGS) -S -o $@ $<
 
-$(ARCH_DIR)/kernel-offsets.h: $(ARCH_DIR)/kernel-offsets.s
+$(ARCH_DIR)/include/kern_constants.h: $(ARCH_DIR)/kernel-offsets.s
 	$(call filechk,gen-asm-offsets)
 
-CLEAN_FILES += $(ARCH_DIR)/kernel-offsets.s  $(ARCH_DIR)/kernel-offsets.h
-
-$(ARCH_DIR)/include/task.h: $(ARCH_DIR)/util/mk_task
-	$(call filechk,gen_header)
-
-$(ARCH_DIR)/include/user_constants.h: $(ARCH_DIR)/os-$(OS)/util/mk_user_constants
-	$(call filechk,gen_header)
-
-$(ARCH_DIR)/include/kern_constants.h: $(ARCH_DIR)/util/mk_constants
-	$(call filechk,gen_header)
-
-$(ARCH_DIR)/include/skas_ptregs.h: $(ARCH_DIR)/kernel/skas/util/mk_ptregs
-	$(call filechk,gen_header)
-
-$(ARCH_DIR)/os-$(OS)/util/mk_user_constants: $(ARCH_DIR)/os-$(OS)/util FORCE ;
-
-$(ARCH_DIR)/util/mk_task $(ARCH_DIR)/util/mk_constants: $(ARCH_DIR)/include/user_constants.h $(ARCH_DIR)/util \
-	FORCE ;
-
-$(ARCH_DIR)/kernel/skas/util/mk_ptregs: $(ARCH_DIR)/kernel/skas/util FORCE ;
-
-$(ARCH_DIR)/util: scripts_basic $(SYS_DIR)/sc.h $(ARCH_DIR)/kernel-offsets.h FORCE
-	$(Q)$(MAKE) $(build)=$@
-
-$(ARCH_DIR)/kernel/skas/util: scripts_basic $(ARCH_DIR)/user-offsets.h FORCE
-	$(Q)$(MAKE) $(build)=$@
-
-$(ARCH_DIR)/os-$(OS)/util: scripts_basic $(ARCH_DIR)/user-offsets.h FORCE
-	$(Q)$(MAKE) $(build)=$@
+CLEAN_FILES += $(ARCH_DIR)/kernel-offsets.s
 
 export SUBARCH USER_CFLAGS OS
diff --git a/arch/um/Makefile-i386 b/arch/um/Makefile-i386
index 1ab431a53ac3..7a0e04e34bf9 100644
--- a/arch/um/Makefile-i386
+++ b/arch/um/Makefile-i386
@@ -17,8 +17,6 @@ ifeq ("$(origin SUBARCH)", "command line")
 ifneq ("$(shell uname -m | sed -e s/i.86/i386/)", "$(SUBARCH)")
 CFLAGS			+= $(call cc-option,-m32)
 USER_CFLAGS		+= $(call cc-option,-m32)
-HOSTCFLAGS		+= $(call cc-option,-m32)
-HOSTLDFLAGS		+= $(call cc-option,-m32)
 AFLAGS			+= $(call cc-option,-m32)
 LINK-y			+= $(call cc-option,-m32)
 UML_OBJCOPYFLAGS	+= -F $(ELF_FORMAT)
@@ -29,28 +27,11 @@ endif
 
 CFLAGS += -U__$(SUBARCH)__ -U$(SUBARCH)
 
-ifneq ($(CONFIG_GPROF),y)
-ARCH_CFLAGS += -DUM_FASTCALL
-endif
-
-SYS_UTIL_DIR	:= $(ARCH_DIR)/sys-i386/util
-SYS_HEADERS	:= $(SYS_DIR)/sc.h $(SYS_DIR)/thread.h
-
-prepare: $(SYS_HEADERS)
-
-$(SYS_DIR)/sc.h: $(SYS_UTIL_DIR)/mk_sc
-	$(call filechk,gen_header)
-
-$(SYS_DIR)/thread.h: $(SYS_UTIL_DIR)/mk_thread 
-	$(call filechk,gen_header)
-
-$(SYS_UTIL_DIR)/mk_sc: scripts_basic $(ARCH_DIR)/user-offsets.h FORCE
-	$(Q)$(MAKE) $(build)=$(SYS_UTIL_DIR) $@
-
-$(SYS_UTIL_DIR)/mk_thread: scripts_basic $(ARCH_DIR)/kernel-offsets.h FORCE
-	$(Q)$(MAKE) $(build)=$(SYS_UTIL_DIR) $@
+# First of all, tune CFLAGS for the specific CPU. This actually sets cflags-y.
+include $(srctree)/arch/i386/Makefile.cpu
 
-$(SYS_UTIL_DIR): scripts_basic include/asm FORCE
-	$(Q)$(MAKE) $(build)=$(SYS_UTIL_DIR)
+# prevent gcc from keeping the stack 16 byte aligned. Taken from i386.
+cflags-y += $(call cc-option,-mpreferred-stack-boundary=2)
 
-CLEAN_FILES += $(SYS_HEADERS)
+CFLAGS += $(cflags-y)
+USER_CFLAGS += $(cflags-y)
diff --git a/arch/um/Makefile-skas b/arch/um/Makefile-skas
index fd18ec572271..ac35de5316a6 100644
--- a/arch/um/Makefile-skas
+++ b/arch/um/Makefile-skas
@@ -10,5 +10,3 @@ CFLAGS-$(CONFIG_GCOV) += $(GCOV_OPT)
 CFLAGS-$(CONFIG_GPROF) += $(GPROF_OPT)
 LINK-$(CONFIG_GCOV) += $(GCOV_OPT)
 LINK-$(CONFIG_GPROF) += $(GPROF_OPT)
-
-GEN_HEADERS += $(ARCH_DIR)/include/skas_ptregs.h
diff --git a/arch/um/Makefile-x86_64 b/arch/um/Makefile-x86_64
index 436abbba409b..4f118d5cc2ee 100644
--- a/arch/um/Makefile-x86_64
+++ b/arch/um/Makefile-x86_64
@@ -12,24 +12,3 @@ CHECKFLAGS  += -m64
 
 ELF_ARCH := i386:x86-64
 ELF_FORMAT := elf64-x86-64
-
-SYS_UTIL_DIR := $(ARCH_DIR)/sys-x86_64/util
-SYS_DIR := $(ARCH_DIR)/include/sysdep-x86_64
-
-SYS_HEADERS = $(SYS_DIR)/sc.h $(SYS_DIR)/thread.h
-
-prepare: $(SYS_HEADERS)
-
-$(SYS_DIR)/sc.h: $(SYS_UTIL_DIR)/mk_sc
-	$(call filechk,gen_header)
-
-$(SYS_DIR)/thread.h: $(SYS_UTIL_DIR)/mk_thread
-	$(call filechk,gen_header)
-
-$(SYS_UTIL_DIR)/mk_sc: scripts_basic $(ARCH_DIR)/user-offsets.h FORCE
-	$(Q)$(MAKE) $(build)=$(SYS_UTIL_DIR) $@
-
-$(SYS_UTIL_DIR)/mk_thread: scripts_basic $(GEN_HEADERS) $(ARCH_DIR)/kernel-offsets.h FORCE
-	$(Q)$(MAKE) $(build)=$(SYS_UTIL_DIR) $@
-
-CLEAN_FILES += $(SYS_HEADERS)
diff --git a/arch/um/drivers/Makefile b/arch/um/drivers/Makefile
index 783e18cae090..de17d4c6e02d 100644
--- a/arch/um/drivers/Makefile
+++ b/arch/um/drivers/Makefile
@@ -13,7 +13,7 @@ mcast-objs := mcast_kern.o mcast_user.o
 net-objs := net_kern.o net_user.o
 mconsole-objs := mconsole_kern.o mconsole_user.o
 hostaudio-objs := hostaudio_kern.o
-ubd-objs := ubd_kern.o
+ubd-objs := ubd_kern.o ubd_user.o
 port-objs := port_kern.o port_user.o
 harddog-objs := harddog_kern.o harddog_user.o
 
diff --git a/arch/um/drivers/chan_kern.c b/arch/um/drivers/chan_kern.c
index 14a12d6b3df6..5b58fad45290 100644
--- a/arch/um/drivers/chan_kern.c
+++ b/arch/um/drivers/chan_kern.c
@@ -19,18 +19,44 @@
 #include "line.h"
 #include "os.h"
 
-#ifdef CONFIG_NOCONFIG_CHAN
+/* XXX: could well be moved to somewhere else, if needed. */
+static int my_printf(const char * fmt, ...)
+	__attribute__ ((format (printf, 1, 2)));
+
+static int my_printf(const char * fmt, ...)
+{
+	/* Yes, can be called on atomic context.*/
+	char *buf = kmalloc(4096, GFP_ATOMIC);
+	va_list args;
+	int r;
+
+	if (!buf) {
+		/* We print directly fmt.
+		 * Yes, yes, yes, feel free to complain. */
+		r = strlen(fmt);
+	} else {
+		va_start(args, fmt);
+		r = vsprintf(buf, fmt, args);
+		va_end(args);
+		fmt = buf;
+	}
 
-/* The printk's here are wrong because we are complaining that there is no
- * output device, but printk is printing to that output device.  The user will
- * never see the error.  printf would be better, except it can't run on a
- * kernel stack because it will overflow it.
- * Use printk for now since that will avoid crashing.
- */
+	if (r)
+		r = os_write_file(1, fmt, r);
+	return r;
+
+}
+
+#ifdef CONFIG_NOCONFIG_CHAN
+/* Despite its name, there's no added trailing newline. */
+static int my_puts(const char * buf)
+{
+	return os_write_file(1, buf, strlen(buf));
+}
 
 static void *not_configged_init(char *str, int device, struct chan_opts *opts)
 {
-	printk(KERN_ERR "Using a channel type which is configured out of "
+	my_puts("Using a channel type which is configured out of "
 	       "UML\n");
 	return(NULL);
 }
@@ -38,35 +64,34 @@ static void *not_configged_init(char *str, int device, struct chan_opts *opts)
 static int not_configged_open(int input, int output, int primary, void *data,
 			      char **dev_out)
 {
-	printk(KERN_ERR "Using a channel type which is configured out of "
+	my_puts("Using a channel type which is configured out of "
 	       "UML\n");
 	return(-ENODEV);
 }
 
 static void not_configged_close(int fd, void *data)
 {
-	printk(KERN_ERR "Using a channel type which is configured out of "
+	my_puts("Using a channel type which is configured out of "
 	       "UML\n");
 }
 
 static int not_configged_read(int fd, char *c_out, void *data)
 {
-	printk(KERN_ERR "Using a channel type which is configured out of "
+	my_puts("Using a channel type which is configured out of "
 	       "UML\n");
 	return(-EIO);
 }
 
 static int not_configged_write(int fd, const char *buf, int len, void *data)
 {
-	printk(KERN_ERR "Using a channel type which is configured out of "
+	my_puts("Using a channel type which is configured out of "
 	       "UML\n");
 	return(-EIO);
 }
 
-static int not_configged_console_write(int fd, const char *buf, int len,
-				       void *data)
+static int not_configged_console_write(int fd, const char *buf, int len)
 {
-	printk(KERN_ERR "Using a channel type which is configured out of "
+	my_puts("Using a channel type which is configured out of "
 	       "UML\n");
 	return(-EIO);
 }
@@ -74,14 +99,14 @@ static int not_configged_console_write(int fd, const char *buf, int len,
 static int not_configged_window_size(int fd, void *data, unsigned short *rows,
 				     unsigned short *cols)
 {
-	printk(KERN_ERR "Using a channel type which is configured out of "
+	my_puts("Using a channel type which is configured out of "
 	       "UML\n");
 	return(-ENODEV);
 }
 
 static void not_configged_free(void *data)
 {
-	printf(KERN_ERR "Using a channel type which is configured out of "
+	my_puts("Using a channel type which is configured out of "
 	       "UML\n");
 }
 
@@ -273,7 +298,7 @@ int console_write_chan(struct list_head *chans, const char *buf, int len)
 		chan = list_entry(ele, struct chan, list);
 		if(!chan->output || (chan->ops->console_write == NULL))
 			continue;
-		n = chan->ops->console_write(chan->fd, buf, len, chan->data);
+		n = chan->ops->console_write(chan->fd, buf, len);
 		if(chan->primary) ret = n;
 	}
 	return(ret);
@@ -457,7 +482,7 @@ static struct chan *parse_chan(char *str, int pri, int device,
 		}
 	}
 	if(ops == NULL){
-		printk(KERN_ERR "parse_chan couldn't parse \"%s\"\n", 
+		my_printf("parse_chan couldn't parse \"%s\"\n",
 		       str);
 		return(NULL);
 	}
@@ -465,7 +490,7 @@ static struct chan *parse_chan(char *str, int pri, int device,
 	data = (*ops->init)(str, device, opts);
 	if(data == NULL) return(NULL);
 
-	chan = kmalloc(sizeof(*chan), GFP_KERNEL);
+	chan = kmalloc(sizeof(*chan), GFP_ATOMIC);
 	if(chan == NULL) return(NULL);
 	*chan = ((struct chan) { .list	 	= LIST_HEAD_INIT(chan->list),
 				 .primary	= 1,
diff --git a/arch/um/drivers/chan_user.c b/arch/um/drivers/chan_user.c
index de3bce71aeb3..5d50d4a44abf 100644
--- a/arch/um/drivers/chan_user.c
+++ b/arch/um/drivers/chan_user.c
@@ -16,12 +16,11 @@
 #include "user_util.h"
 #include "chan_user.h"
 #include "user.h"
-#include "helper.h"
 #include "os.h"
 #include "choose-mode.h"
 #include "mode.h"
 
-int generic_console_write(int fd, const char *buf, int n, void *unused)
+int generic_console_write(int fd, const char *buf, int n)
 {
 	struct termios save, new;
 	int err;
diff --git a/arch/um/drivers/cow.h b/arch/um/drivers/cow.h
index 4fcf3a8d13f4..dc36b222100b 100644
--- a/arch/um/drivers/cow.h
+++ b/arch/um/drivers/cow.h
@@ -3,15 +3,40 @@
 
 #include <asm/types.h>
 
-#if defined(__BIG_ENDIAN)
-# define ntohll(x) (x)
-# define htonll(x) (x)
-#elif defined(__LITTLE_ENDIAN)
-# define ntohll(x)  bswap_64(x)
-# define htonll(x)  bswap_64(x)
+#if defined(__KERNEL__)
+
+# include <asm/byteorder.h>
+
+# if defined(__BIG_ENDIAN)
+#	define ntohll(x) (x)
+#	define htonll(x) (x)
+# elif defined(__LITTLE_ENDIAN)
+#	define ntohll(x)  be64_to_cpu(x)
+#	define htonll(x)  cpu_to_be64(x)
+# else
+#	error "Could not determine byte order"
+# endif
+
 #else
-#error "__BYTE_ORDER not defined"
+/* For the definition of ntohl, htonl and __BYTE_ORDER */
+#include <endian.h>
+#include <netinet/in.h>
+#if defined(__BYTE_ORDER)
+
+#  if __BYTE_ORDER == __BIG_ENDIAN
+#	define ntohll(x) (x)
+#	define htonll(x) (x)
+#  elif __BYTE_ORDER == __LITTLE_ENDIAN
+#	define ntohll(x)  bswap_64(x)
+#	define htonll(x)  bswap_64(x)
+#  else
+#	error "Could not determine byte order: __BYTE_ORDER uncorrectly defined"
+#  endif
+
+#else  /* ! defined(__BYTE_ORDER) */
+#	error "Could not determine byte order: __BYTE_ORDER not defined"
 #endif
+#endif /* ! defined(__KERNEL__) */
 
 extern int init_cow_file(int fd, char *cow_file, char *backing_file,
 			 int sectorsize, int alignment, int *bitmap_offset_out,
diff --git a/arch/um/drivers/cow_user.c b/arch/um/drivers/cow_user.c
index a8ce6fc3ef26..fbe2217db5dd 100644
--- a/arch/um/drivers/cow_user.c
+++ b/arch/um/drivers/cow_user.c
@@ -9,7 +9,6 @@
 #include <sys/time.h>
 #include <sys/param.h>
 #include <sys/user.h>
-#include <netinet/in.h>
 
 #include "os.h"
 
diff --git a/arch/um/drivers/daemon_user.c b/arch/um/drivers/daemon_user.c
index c1b03f7c1daa..1bb085b2824d 100644
--- a/arch/um/drivers/daemon_user.c
+++ b/arch/um/drivers/daemon_user.c
@@ -98,7 +98,7 @@ static int connect_to_switch(struct daemon_data *pri)
 		printk("daemon_open : control setup request failed, err = %d\n",
 		       -n);
 		err = -ENOTCONN;
-		goto out;		
+		goto out_free;
 	}
 
 	n = os_read_file(pri->control, sun, sizeof(*sun));
@@ -106,12 +106,14 @@ static int connect_to_switch(struct daemon_data *pri)
 		printk("daemon_open : read of data socket failed, err = %d\n",
 		       -n);
 		err = -ENOTCONN;
-		goto out_close;		
+		goto out_free;
 	}
 
 	pri->data_addr = sun;
 	return(fd);
 
+ out_free:
+	kfree(sun);
  out_close:
 	os_close_file(fd);
  out:
diff --git a/arch/um/drivers/fd.c b/arch/um/drivers/fd.c
index f0b888f66e05..3296e86a03a5 100644
--- a/arch/um/drivers/fd.c
+++ b/arch/um/drivers/fd.c
@@ -76,13 +76,6 @@ static void fd_close(int fd, void *d)
 	}
 }
 
-static int fd_console_write(int fd, const char *buf, int n, void *d)
-{
-	struct fd_chan *data = d;
-
-	return(generic_console_write(fd, buf, n, &data->tt));
-}
-
 struct chan_ops fd_ops = {
 	.type		= "fd",
 	.init		= fd_init,
@@ -90,7 +83,7 @@ struct chan_ops fd_ops = {
 	.close		= fd_close,
 	.read		= generic_read,
 	.write		= generic_write,
-	.console_write	= fd_console_write,
+	.console_write	= generic_console_write,
 	.window_size	= generic_window_size,
 	.free		= generic_free,
 	.winch		= 1,
diff --git a/arch/um/drivers/harddog_kern.c b/arch/um/drivers/harddog_kern.c
index 147ec19f6bb9..49acb2badf32 100644
--- a/arch/um/drivers/harddog_kern.c
+++ b/arch/um/drivers/harddog_kern.c
@@ -46,7 +46,6 @@
 #include <linux/smp_lock.h>
 #include <linux/init.h>
 #include <asm/uaccess.h>
-#include "helper.h"
 #include "mconsole.h"
 
 MODULE_LICENSE("GPL");
diff --git a/arch/um/drivers/harddog_user.c b/arch/um/drivers/harddog_user.c
index d934181b8d4c..def013b5a3c7 100644
--- a/arch/um/drivers/harddog_user.c
+++ b/arch/um/drivers/harddog_user.c
@@ -8,7 +8,6 @@
 #include <errno.h>
 #include "user_util.h"
 #include "user.h"
-#include "helper.h"
 #include "mconsole.h"
 #include "os.h"
 #include "choose-mode.h"
diff --git a/arch/um/drivers/mcast_user.c b/arch/um/drivers/mcast_user.c
index 5db136e2651c..afe85bfa66e0 100644
--- a/arch/um/drivers/mcast_user.c
+++ b/arch/um/drivers/mcast_user.c
@@ -54,7 +54,7 @@ static int mcast_open(void *data)
 	struct mcast_data *pri = data;
 	struct sockaddr_in *sin = pri->mcast_addr;
 	struct ip_mreq mreq;
-	int fd, yes = 1, err = 0;
+	int fd, yes = 1, err = -EINVAL;
 
 
 	if ((sin->sin_addr.s_addr == 0) || (sin->sin_port == 0))
@@ -63,40 +63,40 @@ static int mcast_open(void *data)
 	fd = socket(AF_INET, SOCK_DGRAM, 0);
 
 	if (fd < 0){
+		err = -errno;
 		printk("mcast_open : data socket failed, errno = %d\n", 
 		       errno);
-		err = -errno;
 		goto out;
 	}
 
 	if (setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &yes, sizeof(yes)) < 0) {
+		err = -errno;
 		printk("mcast_open: SO_REUSEADDR failed, errno = %d\n",
 			errno);
-		err = -errno;
 		goto out_close;
 	}
 
 	/* set ttl according to config */
 	if (setsockopt(fd, SOL_IP, IP_MULTICAST_TTL, &pri->ttl,
 		       sizeof(pri->ttl)) < 0) {
+		err = -errno;
 		printk("mcast_open: IP_MULTICAST_TTL failed, error = %d\n",
 			errno);
-		err = -errno;
 		goto out_close;
 	}
 
 	/* set LOOP, so data does get fed back to local sockets */
 	if (setsockopt(fd, SOL_IP, IP_MULTICAST_LOOP, &yes, sizeof(yes)) < 0) {
+		err = -errno;
 		printk("mcast_open: IP_MULTICAST_LOOP failed, error = %d\n",
 			errno);
-		err = -errno;
 		goto out_close;
 	}
 
 	/* bind socket to mcast address */
 	if (bind(fd, (struct sockaddr *) sin, sizeof(*sin)) < 0) {
-		printk("mcast_open : data bind failed, errno = %d\n", errno);
 		err = -errno;
+		printk("mcast_open : data bind failed, errno = %d\n", errno);
 		goto out_close;
 	}		
 	
@@ -105,22 +105,22 @@ static int mcast_open(void *data)
 	mreq.imr_interface.s_addr = 0;
 	if (setsockopt(fd, SOL_IP, IP_ADD_MEMBERSHIP, 
 		       &mreq, sizeof(mreq)) < 0) {
+		err = -errno;
 		printk("mcast_open: IP_ADD_MEMBERSHIP failed, error = %d\n",
 			errno);
 		printk("There appears not to be a multicast-capable network "
 		       "interface on the host.\n");
 		printk("eth0 should be configured in order to use the "
 		       "multicast transport.\n");
-		err = -errno;
-                goto out_close;
+		goto out_close;
 	}
 
 	return fd;
 
  out_close:
-        os_close_file(fd);
+	os_close_file(fd);
  out:
-        return err;
+	return err;
 }
 
 static void mcast_close(int fd, void *data)
diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c
index 1495007bf6c0..84c73a300acb 100644
--- a/arch/um/drivers/net_kern.c
+++ b/arch/um/drivers/net_kern.c
@@ -20,6 +20,7 @@
 #include "linux/ctype.h"
 #include "linux/bootmem.h"
 #include "linux/ethtool.h"
+#include "linux/platform_device.h"
 #include "asm/uaccess.h"
 #include "user_util.h"
 #include "kern_util.h"
@@ -95,7 +96,6 @@ irqreturn_t uml_net_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 static int uml_net_open(struct net_device *dev)
 {
 	struct uml_net_private *lp = dev->priv;
-	char addr[sizeof("255.255.255.255\0")];
 	int err;
 
 	spin_lock(&lp->lock);
@@ -106,7 +106,7 @@ static int uml_net_open(struct net_device *dev)
 	}
 
 	if(!lp->have_mac){
- 		dev_ip_addr(dev, addr, &lp->mac[2]);
+ 		dev_ip_addr(dev, &lp->mac[2]);
  		set_ether_mac(dev, lp->mac);
 	}
 
@@ -243,34 +243,18 @@ static int uml_net_change_mtu(struct net_device *dev, int new_mtu)
 	return err;
 }
 
-static int uml_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-{
-	static const struct ethtool_drvinfo info = {
-		.cmd     = ETHTOOL_GDRVINFO,
-		.driver  = DRIVER_NAME,
-		.version = "42",
-	};
-	void *useraddr;
-	u32 ethcmd;
-
-	switch (cmd) {
-	case SIOCETHTOOL:
-		useraddr = ifr->ifr_data;
-		if (copy_from_user(&ethcmd, useraddr, sizeof(ethcmd)))
-			return -EFAULT;
-		switch (ethcmd) {
-		case ETHTOOL_GDRVINFO:
-			if (copy_to_user(useraddr, &info, sizeof(info)))
-				return -EFAULT;
-			return 0;
-		default:
-			return -EOPNOTSUPP;
-		}
-	default:
-		return -EINVAL;
-	}
+static void uml_net_get_drvinfo(struct net_device *dev,
+				struct ethtool_drvinfo *info)
+{
+	strcpy(info->driver, DRIVER_NAME);
+	strcpy(info->version, "42");
 }
 
+static struct ethtool_ops uml_net_ethtool_ops = {
+	.get_drvinfo	= uml_net_get_drvinfo,
+	.get_link	= ethtool_op_get_link,
+};
+
 void uml_net_user_timer_expire(unsigned long _conn)
 {
 #ifdef undef
@@ -284,9 +268,10 @@ void uml_net_user_timer_expire(unsigned long _conn)
 static DEFINE_SPINLOCK(devices_lock);
 static struct list_head devices = LIST_HEAD_INIT(devices);
 
-static struct device_driver uml_net_driver = {
-	.name  = DRIVER_NAME,
-	.bus   = &platform_bus_type,
+static struct platform_driver uml_net_driver = {
+	.driver = {
+		.name  = DRIVER_NAME,
+	},
 };
 static int driver_registered;
 
@@ -333,7 +318,7 @@ static int eth_configure(int n, void *init, char *mac,
 
 	/* sysfs register */
 	if (!driver_registered) {
-		driver_register(&uml_net_driver);
+		platform_driver_register(&uml_net_driver);
 		driver_registered = 1;
 	}
 	device->pdev.id = n;
@@ -359,7 +344,7 @@ static int eth_configure(int n, void *init, char *mac,
 	dev->tx_timeout = uml_net_tx_timeout;
 	dev->set_mac_address = uml_net_set_mac;
 	dev->change_mtu = uml_net_change_mtu;
-	dev->do_ioctl = uml_net_ioctl;
+	dev->ethtool_ops = &uml_net_ethtool_ops;
 	dev->watchdog_timeo = (HZ >> 1);
 	dev->irq = UM_ETH_IRQ;
 
@@ -663,8 +648,6 @@ static int uml_inetaddr_event(struct notifier_block *this, unsigned long event,
 			      void *ptr)
 {
 	struct in_ifaddr *ifa = ptr;
-	u32 addr = ifa->ifa_address;
-	u32 netmask = ifa->ifa_mask;
 	struct net_device *dev = ifa->ifa_dev->dev;
 	struct uml_net_private *lp;
 	void (*proc)(unsigned char *, unsigned char *, void *);
@@ -684,14 +667,8 @@ static int uml_inetaddr_event(struct notifier_block *this, unsigned long event,
 		break;
 	}
 	if(proc != NULL){
-		addr_buf[0] = addr & 0xff;
-		addr_buf[1] = (addr >> 8) & 0xff;
-		addr_buf[2] = (addr >> 16) & 0xff;
-		addr_buf[3] = addr >> 24;
-		netmask_buf[0] = netmask & 0xff;
-		netmask_buf[1] = (netmask >> 8) & 0xff;
-		netmask_buf[2] = (netmask >> 16) & 0xff;
-		netmask_buf[3] = netmask >> 24;
+		memcpy(addr_buf, &ifa->ifa_address, sizeof(addr_buf));
+		memcpy(netmask_buf, &ifa->ifa_mask, sizeof(netmask_buf));
 		(*proc)(addr_buf, netmask_buf, &lp->user);
 	}
 	return(NOTIFY_DONE);
@@ -773,27 +750,18 @@ int setup_etheraddr(char *str, unsigned char *addr)
 	return(1);
 }
 
-void dev_ip_addr(void *d, char *buf, char *bin_buf)
+void dev_ip_addr(void *d, unsigned char *bin_buf)
 {
 	struct net_device *dev = d;
 	struct in_device *ip = dev->ip_ptr;
 	struct in_ifaddr *in;
-	u32 addr;
 
 	if((ip == NULL) || ((in = ip->ifa_list) == NULL)){
 		printk(KERN_WARNING "dev_ip_addr - device not assigned an "
 		       "IP address\n");
 		return;
 	}
-	addr = in->ifa_address;
-	sprintf(buf, "%d.%d.%d.%d", addr & 0xff, (addr >> 8) & 0xff, 
-		(addr >> 16) & 0xff, addr >> 24);
-	if(bin_buf){
-		bin_buf[0] = addr & 0xff;
-		bin_buf[1] = (addr >> 8) & 0xff;
-		bin_buf[2] = (addr >> 16) & 0xff;
-		bin_buf[3] = addr >> 24;
-	}
+	memcpy(bin_buf, &in->ifa_address, sizeof(in->ifa_address));
 }
 
 void set_ether_mac(void *d, unsigned char *addr)
@@ -828,14 +796,8 @@ void iter_addresses(void *d, void (*cb)(unsigned char *, unsigned char *,
 	if(ip == NULL) return;
 	in = ip->ifa_list;
 	while(in != NULL){
-		address[0] = in->ifa_address & 0xff;
-		address[1] = (in->ifa_address >> 8) & 0xff;
-		address[2] = (in->ifa_address >> 16) & 0xff;
-		address[3] = in->ifa_address >> 24;
-		netmask[0] = in->ifa_mask & 0xff;
-		netmask[1] = (in->ifa_mask >> 8) & 0xff;
-		netmask[2] = (in->ifa_mask >> 16) & 0xff;
-		netmask[3] = in->ifa_mask >> 24;
+		memcpy(address, &in->ifa_address, sizeof(address));
+		memcpy(netmask, &in->ifa_mask, sizeof(netmask));
 		(*cb)(address, netmask, arg);
 		in = in->ifa_next;
 	}
diff --git a/arch/um/drivers/net_user.c b/arch/um/drivers/net_user.c
index 3730d4f12713..098fa65981ab 100644
--- a/arch/um/drivers/net_user.c
+++ b/arch/um/drivers/net_user.c
@@ -16,7 +16,6 @@
 #include "user_util.h"
 #include "kern_util.h"
 #include "net_user.h"
-#include "helper.h"
 #include "os.h"
 
 int tap_open_common(void *dev, char *gate_addr)
diff --git a/arch/um/drivers/port_kern.c b/arch/um/drivers/port_kern.c
index c41efd207fcc..189839e4f1d4 100644
--- a/arch/um/drivers/port_kern.c
+++ b/arch/um/drivers/port_kern.c
@@ -7,7 +7,6 @@
 #include "linux/sched.h"
 #include "linux/slab.h"
 #include "linux/interrupt.h"
-#include "linux/irq.h"
 #include "linux/spinlock.h"
 #include "linux/errno.h"
 #include "asm/atomic.h"
diff --git a/arch/um/drivers/port_user.c b/arch/um/drivers/port_user.c
index 14dd2002d2da..c43e8bb32502 100644
--- a/arch/um/drivers/port_user.c
+++ b/arch/um/drivers/port_user.c
@@ -18,7 +18,6 @@
 #include "user.h"
 #include "chan_user.h"
 #include "port.h"
-#include "helper.h"
 #include "os.h"
 
 struct port_chan {
@@ -101,13 +100,6 @@ static void port_close(int fd, void *d)
 	os_close_file(fd);
 }
 
-static int port_console_write(int fd, const char *buf, int n, void *d)
-{
-	struct port_chan *data = d;
-
-	return(generic_console_write(fd, buf, n, &data->tt));
-}
-
 struct chan_ops port_ops = {
 	.type		= "port",
 	.init		= port_init,
@@ -115,7 +107,7 @@ struct chan_ops port_ops = {
 	.close		= port_close,
 	.read	        = generic_read,
 	.write		= generic_write,
-	.console_write	= port_console_write,
+	.console_write	= generic_console_write,
 	.window_size	= generic_window_size,
 	.free		= port_free,
 	.winch		= 1,
diff --git a/arch/um/drivers/pty.c b/arch/um/drivers/pty.c
index 0306a1b215b7..1c555c38de4d 100644
--- a/arch/um/drivers/pty.c
+++ b/arch/um/drivers/pty.c
@@ -118,13 +118,6 @@ static int pty_open(int input, int output, int primary, void *d,
 	return(fd);
 }
 
-static int pty_console_write(int fd, const char *buf, int n, void *d)
-{
-	struct pty_chan *data = d;
-
-	return(generic_console_write(fd, buf, n, &data->tt));
-}
-
 struct chan_ops pty_ops = {
 	.type		= "pty",
 	.init		= pty_chan_init,
@@ -132,7 +125,7 @@ struct chan_ops pty_ops = {
 	.close		= generic_close,
 	.read		= generic_read,
 	.write		= generic_write,
-	.console_write	= pty_console_write,
+	.console_write	= generic_console_write,
 	.window_size	= generic_window_size,
 	.free		= generic_free,
 	.winch		= 0,
@@ -145,7 +138,7 @@ struct chan_ops pts_ops = {
 	.close		= generic_close,
 	.read		= generic_read,
 	.write		= generic_write,
-	.console_write	= pty_console_write,
+	.console_write	= generic_console_write,
 	.window_size	= generic_window_size,
 	.free		= generic_free,
 	.winch		= 0,
diff --git a/arch/um/drivers/random.c b/arch/um/drivers/random.c
index f9e22198e011..ba471f5864a6 100644
--- a/arch/um/drivers/random.c
+++ b/arch/um/drivers/random.c
@@ -58,10 +58,8 @@ static ssize_t rng_dev_read (struct file *filp, char __user *buf, size_t size,
                         if (filp->f_flags & O_NONBLOCK)
                                 return ret ? : -EAGAIN;
 
-                        if(need_resched()){
-                                current->state = TASK_INTERRUPTIBLE;
-                                schedule_timeout(1);
-                        }
+                        if(need_resched())
+                                schedule_timeout_interruptible(1);
                 }
                 else return n;
 		if (signal_pending (current))
diff --git a/arch/um/drivers/slip_user.c b/arch/um/drivers/slip_user.c
index 71af444e591f..89fbec185cc1 100644
--- a/arch/um/drivers/slip_user.c
+++ b/arch/um/drivers/slip_user.c
@@ -14,7 +14,6 @@
 #include "net_user.h"
 #include "slip.h"
 #include "slip_common.h"
-#include "helper.h"
 #include "os.h"
 
 void slip_user_init(void *data, void *dev)
diff --git a/arch/um/drivers/slirp_user.c b/arch/um/drivers/slirp_user.c
index 8d91f663d82c..b94c66114bc8 100644
--- a/arch/um/drivers/slirp_user.c
+++ b/arch/um/drivers/slirp_user.c
@@ -13,7 +13,6 @@
 #include "net_user.h"
 #include "slirp.h"
 #include "slip_common.h"
-#include "helper.h"
 #include "os.h"
 
 void slirp_user_init(void *data, void *dev)
diff --git a/arch/um/drivers/tty.c b/arch/um/drivers/tty.c
index 6fbb670ee274..94c9265a4f2c 100644
--- a/arch/um/drivers/tty.c
+++ b/arch/um/drivers/tty.c
@@ -60,13 +60,6 @@ static int tty_open(int input, int output, int primary, void *d,
 	return(fd);
 }
 
-static int tty_console_write(int fd, const char *buf, int n, void *d)
-{
-	struct tty_chan *data = d;
-
-	return(generic_console_write(fd, buf, n, &data->tt));
-}
-
 struct chan_ops tty_ops = {
 	.type		= "tty",
 	.init		= tty_chan_init,
@@ -74,7 +67,7 @@ struct chan_ops tty_ops = {
 	.close		= generic_close,
 	.read		= generic_read,
 	.write		= generic_write,
-	.console_write	= tty_console_write,
+	.console_write	= generic_console_write,
 	.window_size	= generic_window_size,
 	.free		= generic_free,
 	.winch		= 0,
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index e77a38da4350..93898917cbe5 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -35,7 +35,7 @@
 #include "linux/blkpg.h"
 #include "linux/genhd.h"
 #include "linux/spinlock.h"
-#include "asm/atomic.h"
+#include "linux/platform_device.h"
 #include "asm/segment.h"
 #include "asm/uaccess.h"
 #include "asm/irq.h"
@@ -54,21 +54,20 @@
 #include "mem.h"
 #include "mem_kern.h"
 #include "cow.h"
-#include "aio.h"
 
 enum ubd_req { UBD_READ, UBD_WRITE };
 
 struct io_thread_req {
-	enum aio_type op;
+	enum ubd_req op;
 	int fds[2];
 	unsigned long offsets[2];
 	unsigned long long offset;
 	unsigned long length;
 	char *buffer;
 	int sectorsize;
-	int bitmap_offset;
-	long bitmap_start;
-	long bitmap_end;
+	unsigned long sector_mask;
+	unsigned long long cow_offset;
+	unsigned long bitmap_words[2];
 	int error;
 };
 
@@ -82,31 +81,28 @@ extern int create_cow_file(char *cow_file, char *backing_file,
 			   unsigned long *bitmap_len_out,
 			   int *data_offset_out);
 extern int read_cow_bitmap(int fd, void *buf, int offset, int len);
-extern void do_io(struct io_thread_req *req, struct request *r,
-		  unsigned long *bitmap);
+extern void do_io(struct io_thread_req *req);
 
-static inline int ubd_test_bit(__u64 bit, void *data)
+static inline int ubd_test_bit(__u64 bit, unsigned char *data)
 {
-	unsigned char *buffer = data;
 	__u64 n;
 	int bits, off;
 
-	bits = sizeof(buffer[0]) * 8;
+	bits = sizeof(data[0]) * 8;
 	n = bit / bits;
 	off = bit % bits;
-	return((buffer[n] & (1 << off)) != 0);
+	return((data[n] & (1 << off)) != 0);
 }
 
-static inline void ubd_set_bit(__u64 bit, void *data)
+static inline void ubd_set_bit(__u64 bit, unsigned char *data)
 {
-	unsigned char *buffer = data;
 	__u64 n;
 	int bits, off;
 
-	bits = sizeof(buffer[0]) * 8;
+	bits = sizeof(data[0]) * 8;
 	n = bit / bits;
 	off = bit % bits;
-	buffer[n] |= (1 << off);
+	data[n] |= (1 << off);
 }
 /*End stuff from ubd_user.h*/
 
@@ -115,6 +111,8 @@ static inline void ubd_set_bit(__u64 bit, void *data)
 static DEFINE_SPINLOCK(ubd_io_lock);
 static DEFINE_SPINLOCK(ubd_lock);
 
+static void (*do_ubd)(void);
+
 static int ubd_open(struct inode * inode, struct file * filp);
 static int ubd_release(struct inode * inode, struct file * file);
 static int ubd_ioctl(struct inode * inode, struct file * file,
@@ -161,8 +159,6 @@ struct cow {
         int data_offset;
 };
 
-#define MAX_SG 64
-
 struct ubd {
 	char *file;
 	int count;
@@ -173,7 +169,6 @@ struct ubd {
 	int no_cow;
 	struct cow cow;
 	struct platform_device pdev;
-        struct scatterlist sg[MAX_SG];
 };
 
 #define DEFAULT_COW { \
@@ -466,114 +461,81 @@ __uml_help(fakehd,
 );
 
 static void do_ubd_request(request_queue_t * q);
-static int in_ubd;
+
+/* Only changed by ubd_init, which is an initcall. */
+int thread_fd = -1;
 
 /* Changed by ubd_handler, which is serialized because interrupts only
  * happen on CPU 0.
  */
 int intr_count = 0;
 
-static void ubd_end_request(struct request *req, int bytes, int uptodate)
+/* call ubd_finish if you need to serialize */
+static void __ubd_finish(struct request *req, int error)
 {
-	if (!end_that_request_first(req, uptodate, bytes >> 9)) {
-		add_disk_randomness(req->rq_disk);
-		end_that_request_last(req);
+	int nsect;
+
+	if(error){
+		end_request(req, 0);
+		return;
 	}
+	nsect = req->current_nr_sectors;
+	req->sector += nsect;
+	req->buffer += nsect << 9;
+	req->errors = 0;
+	req->nr_sectors -= nsect;
+	req->current_nr_sectors = 0;
+	end_request(req, 1);
 }
 
-/* call ubd_finish if you need to serialize */
-static void __ubd_finish(struct request *req, int bytes)
+static inline void ubd_finish(struct request *req, int error)
 {
-	if(bytes < 0){
-		ubd_end_request(req, 0, 0);
-  		return;
-  	}
-
-	ubd_end_request(req, bytes, 1);
+ 	spin_lock(&ubd_io_lock);
+	__ubd_finish(req, error);
+	spin_unlock(&ubd_io_lock);
 }
 
-static inline void ubd_finish(struct request *req, int bytes)
+/* Called without ubd_io_lock held */
+static void ubd_handler(void)
 {
-   	spin_lock(&ubd_io_lock);
-	__ubd_finish(req, bytes);
-  	spin_unlock(&ubd_io_lock);
+	struct io_thread_req req;
+	struct request *rq = elv_next_request(ubd_queue);
+	int n;
+
+	do_ubd = NULL;
+	intr_count++;
+	n = os_read_file(thread_fd, &req, sizeof(req));
+	if(n != sizeof(req)){
+		printk(KERN_ERR "Pid %d - spurious interrupt in ubd_handler, "
+		       "err = %d\n", os_getpid(), -n);
+		spin_lock(&ubd_io_lock);
+		end_request(rq, 0);
+		spin_unlock(&ubd_io_lock);
+		return;
+	}
+        
+	ubd_finish(rq, req.error);
+	reactivate_fd(thread_fd, UBD_IRQ);	
+	do_ubd_request(ubd_queue);
 }
 
-struct bitmap_io {
-        atomic_t count;
-        struct aio_context aio;
-};
-
-struct ubd_aio {
-        struct aio_context aio;
-        struct request *req;
-        int len;
-        struct bitmap_io *bitmap;
-        void *bitmap_buf;
-};
-
-static int ubd_reply_fd = -1;
-
 static irqreturn_t ubd_intr(int irq, void *dev, struct pt_regs *unused)
 {
-	struct aio_thread_reply reply;
-	struct ubd_aio *aio;
-	struct request *req;
-	int err, n, fd = (int) (long) dev;
-
-	while(1){
-		err = os_read_file(fd, &reply, sizeof(reply));
-		if(err == -EAGAIN)
-			break;
-		if(err < 0){
-			printk("ubd_aio_handler - read returned err %d\n",
-			       -err);
-			break;
-		}
-
-                aio = container_of(reply.data, struct ubd_aio, aio);
-                n = reply.err;
-
-		if(n == 0){
-			req = aio->req;
-			req->nr_sectors -= aio->len >> 9;
-
-			if((aio->bitmap != NULL) &&
-			   (atomic_dec_and_test(&aio->bitmap->count))){
-                                aio->aio = aio->bitmap->aio;
-                                aio->len = 0;
-                                kfree(aio->bitmap);
-                                aio->bitmap = NULL;
-                                submit_aio(&aio->aio);
-			}
-			else {
-				if((req->nr_sectors == 0) &&
-                                   (aio->bitmap == NULL)){
-					int len = req->hard_nr_sectors << 9;
-					ubd_finish(req, len);
-				}
-
-                                if(aio->bitmap_buf != NULL)
-                                        kfree(aio->bitmap_buf);
-				kfree(aio);
-			}
-		}
-                else if(n < 0){
-                        ubd_finish(aio->req, n);
-                        if(aio->bitmap != NULL)
-                                kfree(aio->bitmap);
-                        if(aio->bitmap_buf != NULL)
-                                kfree(aio->bitmap_buf);
-                        kfree(aio);
-                }
-	}
-	reactivate_fd(fd, UBD_IRQ);
+	ubd_handler();
+	return(IRQ_HANDLED);
+}
 
-        do_ubd_request(ubd_queue);
+/* Only changed by ubd_init, which is an initcall. */
+static int io_pid = -1;
 
-	return(IRQ_HANDLED);
+void kill_io_thread(void)
+{
+	if(io_pid != -1) 
+		os_kill_process(io_pid, 1);
 }
 
+__uml_exitcall(kill_io_thread);
+
 static int ubd_file_size(struct ubd *dev, __u64 *size_out)
 {
 	char *file;
@@ -608,7 +570,7 @@ static int ubd_open_dev(struct ubd *dev)
 				&dev->cow.data_offset, create_ptr);
 
 	if((dev->fd == -ENOENT) && create_cow){
-		dev->fd = create_cow_file(dev->file, dev->cow.file,
+		dev->fd = create_cow_file(dev->file, dev->cow.file, 
 					  dev->openflags, 1 << 9, PAGE_SIZE,
 					  &dev->cow.bitmap_offset, 
 					  &dev->cow.bitmap_len,
@@ -861,19 +823,16 @@ static int ubd_mc_init(void)
 
 __initcall(ubd_mc_init);
 
-static struct device_driver ubd_driver = {
-	.name  = DRIVER_NAME,
-	.bus   = &platform_bus_type,
+static struct platform_driver ubd_driver = {
+	.driver = {
+		.name  = DRIVER_NAME,
+	},
 };
 
 int ubd_init(void)
 {
         int i;
 
-	ubd_reply_fd = init_aio_irq(UBD_IRQ, "ubd", ubd_intr);
-	if(ubd_reply_fd < 0)
-		printk("Setting up ubd AIO failed, err = %d\n", ubd_reply_fd);
-
 	devfs_mk_dir("ubd");
 	if (register_blkdev(MAJOR_NR, "ubd"))
 		return -1;
@@ -884,7 +843,6 @@ int ubd_init(void)
 		return -1;
 	}
 		
-	blk_queue_max_hw_segments(ubd_queue, MAX_SG);
 	if (fake_major != MAJOR_NR) {
 		char name[sizeof("ubd_nnn\0")];
 
@@ -893,15 +851,43 @@ int ubd_init(void)
 		if (register_blkdev(fake_major, "ubd"))
 			return -1;
 	}
-	driver_register(&ubd_driver);
+	platform_driver_register(&ubd_driver);
 	for (i = 0; i < MAX_DEV; i++) 
 		ubd_add(i);
-
 	return 0;
 }
 
 late_initcall(ubd_init);
 
+int ubd_driver_init(void){
+	unsigned long stack;
+	int err;
+
+	/* Set by CONFIG_BLK_DEV_UBD_SYNC or ubd=sync.*/
+	if(global_openflags.s){
+		printk(KERN_INFO "ubd: Synchronous mode\n");
+		/* Letting ubd=sync be like using ubd#s= instead of ubd#= is
+		 * enough. So use anyway the io thread. */
+	}
+	stack = alloc_stack(0, 0);
+	io_pid = start_io_thread(stack + PAGE_SIZE - sizeof(void *), 
+				 &thread_fd);
+	if(io_pid < 0){
+		printk(KERN_ERR 
+		       "ubd : Failed to start I/O thread (errno = %d) - "
+		       "falling back to synchronous I/O\n", -io_pid);
+		io_pid = -1;
+		return(0);
+	}
+	err = um_request_irq(UBD_IRQ, thread_fd, IRQ_READ, ubd_intr, 
+			     SA_INTERRUPT, "ubd", ubd_dev);
+	if(err != 0)
+		printk(KERN_ERR "um_request_irq failed - errno = %d\n", -err);
+	return(err);
+}
+
+device_initcall(ubd_driver_init);
+
 static int ubd_open(struct inode *inode, struct file *filp)
 {
 	struct gendisk *disk = inode->i_bdev->bd_disk;
@@ -939,55 +925,105 @@ static int ubd_release(struct inode * inode, struct file * file)
 	return(0);
 }
 
-static void cowify_bitmap(struct io_thread_req *req, unsigned long *bitmap)
+static void cowify_bitmap(__u64 io_offset, int length, unsigned long *cow_mask,
+			  __u64 *cow_offset, unsigned long *bitmap,
+			  __u64 bitmap_offset, unsigned long *bitmap_words,
+			  __u64 bitmap_len)
 {
-        __u64 sector = req->offset / req->sectorsize;
-        int i;
+	__u64 sector = io_offset >> 9;
+	int i, update_bitmap = 0;
+
+	for(i = 0; i < length >> 9; i++){
+		if(cow_mask != NULL)
+			ubd_set_bit(i, (unsigned char *) cow_mask);
+		if(ubd_test_bit(sector + i, (unsigned char *) bitmap))
+			continue;
 
-        for(i = 0; i < req->length / req->sectorsize; i++){
-                if(ubd_test_bit(sector + i, bitmap))
-                        continue;
+		update_bitmap = 1;
+		ubd_set_bit(sector + i, (unsigned char *) bitmap);
+	}
+
+	if(!update_bitmap)
+		return;
 
-                if(req->bitmap_start == -1)
-                        req->bitmap_start = sector + i;
-                req->bitmap_end = sector + i + 1;
+	*cow_offset = sector / (sizeof(unsigned long) * 8);
 
-                ubd_set_bit(sector + i, bitmap);
-        }
+	/* This takes care of the case where we're exactly at the end of the
+	 * device, and *cow_offset + 1 is off the end.  So, just back it up
+	 * by one word.  Thanks to Lynn Kerby for the fix and James McMechan
+	 * for the original diagnosis.
+	 */
+	if(*cow_offset == ((bitmap_len + sizeof(unsigned long) - 1) /
+			   sizeof(unsigned long) - 1))
+		(*cow_offset)--;
+
+	bitmap_words[0] = bitmap[*cow_offset];
+	bitmap_words[1] = bitmap[*cow_offset + 1];
+
+	*cow_offset *= sizeof(unsigned long);
+	*cow_offset += bitmap_offset;
+}
+
+static void cowify_req(struct io_thread_req *req, unsigned long *bitmap,
+		       __u64 bitmap_offset, __u64 bitmap_len)
+{
+	__u64 sector = req->offset >> 9;
+	int i;
+
+	if(req->length > (sizeof(req->sector_mask) * 8) << 9)
+		panic("Operation too long");
+
+	if(req->op == UBD_READ) {
+		for(i = 0; i < req->length >> 9; i++){
+			if(ubd_test_bit(sector + i, (unsigned char *) bitmap))
+				ubd_set_bit(i, (unsigned char *) 
+					    &req->sector_mask);
+                }
+	}
+	else cowify_bitmap(req->offset, req->length, &req->sector_mask,
+			   &req->cow_offset, bitmap, bitmap_offset,
+			   req->bitmap_words, bitmap_len);
 }
 
 /* Called with ubd_io_lock held */
-static int prepare_request(struct request *req, struct io_thread_req *io_req,
-                           unsigned long long offset, int page_offset,
-                           int len, struct page *page)
+static int prepare_request(struct request *req, struct io_thread_req *io_req)
 {
 	struct gendisk *disk = req->rq_disk;
 	struct ubd *dev = disk->private_data;
+	__u64 offset;
+	int len;
+
+	if(req->rq_status == RQ_INACTIVE) return(1);
 
 	/* This should be impossible now */
 	if((rq_data_dir(req) == WRITE) && !dev->openflags.w){
 		printk("Write attempted on readonly ubd device %s\n", 
 		       disk->disk_name);
-                ubd_end_request(req, 0, 0);
+		end_request(req, 0);
 		return(1);
 	}
 
+	offset = ((__u64) req->sector) << 9;
+	len = req->current_nr_sectors << 9;
+
 	io_req->fds[0] = (dev->cow.file != NULL) ? dev->cow.fd : dev->fd;
 	io_req->fds[1] = dev->fd;
+	io_req->cow_offset = -1;
 	io_req->offset = offset;
 	io_req->length = len;
 	io_req->error = 0;
-	io_req->op = (rq_data_dir(req) == READ) ? AIO_READ : AIO_WRITE;
+	io_req->sector_mask = 0;
+
+	io_req->op = (rq_data_dir(req) == READ) ? UBD_READ : UBD_WRITE;
 	io_req->offsets[0] = 0;
 	io_req->offsets[1] = dev->cow.data_offset;
-        io_req->buffer = page_address(page) + page_offset;
+	io_req->buffer = req->buffer;
 	io_req->sectorsize = 1 << 9;
-        io_req->bitmap_offset = dev->cow.bitmap_offset;
-        io_req->bitmap_start = -1;
-        io_req->bitmap_end = -1;
 
-        if((dev->cow.file != NULL) && (io_req->op == UBD_WRITE))
-                cowify_bitmap(io_req, dev->cow.bitmap);
+	if(dev->cow.file != NULL)
+		cowify_req(io_req, dev->cow.bitmap, dev->cow.bitmap_offset,
+			   dev->cow.bitmap_len);
+
 	return(0);
 }
 
@@ -996,36 +1032,30 @@ static void do_ubd_request(request_queue_t *q)
 {
 	struct io_thread_req io_req;
 	struct request *req;
-	__u64 sector;
-	int err;
-
-	if(in_ubd)
-		return;
-	in_ubd = 1;
-	while((req = elv_next_request(q)) != NULL){
-		struct gendisk *disk = req->rq_disk;
-		struct ubd *dev = disk->private_data;
-		int n, i;
-
-		blkdev_dequeue_request(req);
-
-		sector = req->sector;
-		n = blk_rq_map_sg(q, req, dev->sg);
-
-		for(i = 0; i < n; i++){
-			struct scatterlist *sg = &dev->sg[i];
-
-			err = prepare_request(req, &io_req, sector << 9,
-					      sg->offset, sg->length,
-					      sg->page);
-			if(err)
-				continue;
-
-			sector += sg->length >> 9;
-			do_io(&io_req, req, dev->cow.bitmap);
+	int err, n;
+
+	if(thread_fd == -1){
+		while((req = elv_next_request(q)) != NULL){
+			err = prepare_request(req, &io_req);
+			if(!err){
+				do_io(&io_req);
+				__ubd_finish(req, io_req.error);
+			}
+		}
+	}
+	else {
+		if(do_ubd || (req = elv_next_request(q)) == NULL)
+			return;
+		err = prepare_request(req, &io_req);
+		if(!err){
+			do_ubd = ubd_handler;
+			n = os_write_file(thread_fd, (char *) &io_req,
+					 sizeof(io_req));
+			if(n != sizeof(io_req))
+				printk("write to io thread failed, "
+				       "errno = %d\n", -n);
 		}
 	}
-	in_ubd = 0;
 }
 
 static int ubd_ioctl(struct inode * inode, struct file * file,
@@ -1241,95 +1271,131 @@ int create_cow_file(char *cow_file, char *backing_file, struct openflags flags,
 	return(err);
 }
 
-void do_io(struct io_thread_req *req, struct request *r, unsigned long *bitmap)
+static int update_bitmap(struct io_thread_req *req)
 {
-        struct ubd_aio *aio;
-        struct bitmap_io *bitmap_io = NULL;
-        char *buf;
-        void *bitmap_buf = NULL;
-        unsigned long len, sector;
-        int nsectors, start, end, bit, err;
-        __u64 off;
-
-        if(req->bitmap_start != -1){
-                /* Round up to the nearest word */
-                int round = sizeof(unsigned long);
-                len = (req->bitmap_end - req->bitmap_start +
-                       round * 8 - 1) / (round * 8);
-                len *= round;
-
-                off = req->bitmap_start / (8 * round);
-                off *= round;
-
-                bitmap_io = kmalloc(sizeof(*bitmap_io), GFP_KERNEL);
-                if(bitmap_io == NULL){
-                        printk("Failed to kmalloc bitmap IO\n");
-                        req->error = 1;
-                        return;
-                }
+	int n;
 
-                bitmap_buf = kmalloc(len, GFP_KERNEL);
-                if(bitmap_buf == NULL){
-                        printk("do_io : kmalloc of bitmap chunk "
-                               "failed\n");
-                        kfree(bitmap_io);
-                        req->error = 1;
-                        return;
-                }
-                memcpy(bitmap_buf, &bitmap[off / sizeof(bitmap[0])], len);
-
-                *bitmap_io = ((struct bitmap_io)
-                        { .count	= ATOMIC_INIT(0),
-                          .aio		= INIT_AIO(AIO_WRITE, req->fds[1],
-                                                   bitmap_buf, len,
-                                                   req->bitmap_offset + off,
-                                                   ubd_reply_fd) } );
-        }
+	if(req->cow_offset == -1)
+		return(0);
 
-        nsectors = req->length / req->sectorsize;
-        start = 0;
-        end = nsectors;
-        bit = 0;
-        do {
-                if(bitmap != NULL){
-                        sector = req->offset / req->sectorsize;
-                        bit = ubd_test_bit(sector + start, bitmap);
-                        end = start;
-                        while((end < nsectors) &&
-                              (ubd_test_bit(sector + end, bitmap) == bit))
-                                end++;
-                }
+	n = os_seek_file(req->fds[1], req->cow_offset);
+	if(n < 0){
+		printk("do_io - bitmap lseek failed : err = %d\n", -n);
+		return(1);
+	}
 
-                off = req->offsets[bit] + req->offset +
-                        start * req->sectorsize;
-                len = (end - start) * req->sectorsize;
-                buf = &req->buffer[start * req->sectorsize];
+	n = os_write_file(req->fds[1], &req->bitmap_words,
+		          sizeof(req->bitmap_words));
+	if(n != sizeof(req->bitmap_words)){
+		printk("do_io - bitmap update failed, err = %d fd = %d\n", -n,
+		       req->fds[1]);
+		return(1);
+	}
 
-                aio = kmalloc(sizeof(*aio), GFP_KERNEL);
-                if(aio == NULL){
-                        req->error = 1;
-                        return;
-                }
+	return(0);
+}
 
-                *aio = ((struct ubd_aio)
-                        { .aio		= INIT_AIO(req->op, req->fds[bit], buf,
-                                                   len, off, ubd_reply_fd),
-                          .len		= len,
-                          .req		= r,
-                          .bitmap	= bitmap_io,
-                          .bitmap_buf 	= bitmap_buf });
-
-                if(aio->bitmap != NULL)
-                        atomic_inc(&aio->bitmap->count);
-
-                err = submit_aio(&aio->aio);
-                if(err){
-                        printk("do_io - submit_aio failed, "
-                               "err = %d\n", err);
-                        req->error = 1;
-                        return;
-                }
+void do_io(struct io_thread_req *req)
+{
+	char *buf;
+	unsigned long len;
+	int n, nsectors, start, end, bit;
+	int err;
+	__u64 off;
+
+	nsectors = req->length / req->sectorsize;
+	start = 0;
+	do {
+		bit = ubd_test_bit(start, (unsigned char *) &req->sector_mask);
+		end = start;
+		while((end < nsectors) &&
+		      (ubd_test_bit(end, (unsigned char *)
+				    &req->sector_mask) == bit))
+			end++;
+
+		off = req->offset + req->offsets[bit] +
+			start * req->sectorsize;
+		len = (end - start) * req->sectorsize;
+		buf = &req->buffer[start * req->sectorsize];
+
+		err = os_seek_file(req->fds[bit], off);
+		if(err < 0){
+			printk("do_io - lseek failed : err = %d\n", -err);
+			req->error = 1;
+			return;
+		}
+		if(req->op == UBD_READ){
+			n = 0;
+			do {
+				buf = &buf[n];
+				len -= n;
+				n = os_read_file(req->fds[bit], buf, len);
+				if (n < 0) {
+					printk("do_io - read failed, err = %d "
+					       "fd = %d\n", -n, req->fds[bit]);
+					req->error = 1;
+					return;
+				}
+			} while((n < len) && (n != 0));
+			if (n < len) memset(&buf[n], 0, len - n);
+		} else {
+			n = os_write_file(req->fds[bit], buf, len);
+			if(n != len){
+				printk("do_io - write failed err = %d "
+				       "fd = %d\n", -n, req->fds[bit]);
+				req->error = 1;
+				return;
+			}
+		}
+
+		start = end;
+	} while(start < nsectors);
 
-                start = end;
-        } while(start < nsectors);
+	req->error = update_bitmap(req);
 }
+
+/* Changed in start_io_thread, which is serialized by being called only
+ * from ubd_init, which is an initcall.
+ */
+int kernel_fd = -1;
+
+/* Only changed by the io thread */
+int io_count = 0;
+
+int io_thread(void *arg)
+{
+	struct io_thread_req req;
+	int n;
+
+	ignore_sigwinch_sig();
+	while(1){
+		n = os_read_file(kernel_fd, &req, sizeof(req));
+		if(n != sizeof(req)){
+			if(n < 0)
+				printk("io_thread - read failed, fd = %d, "
+				       "err = %d\n", kernel_fd, -n);
+			else {
+				printk("io_thread - short read, fd = %d, "
+				       "length = %d\n", kernel_fd, n);
+			}
+			continue;
+		}
+		io_count++;
+		do_io(&req);
+		n = os_write_file(kernel_fd, &req, sizeof(req));
+		if(n != sizeof(req))
+			printk("io_thread - write failed, fd = %d, err = %d\n",
+			       kernel_fd, -n);
+	}
+}
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/arch/um/drivers/ubd_user.c b/arch/um/drivers/ubd_user.c
new file mode 100644
index 000000000000..b94d2bc4fe06
--- /dev/null
+++ b/arch/um/drivers/ubd_user.c
@@ -0,0 +1,75 @@
+/* 
+ * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2001 Ridgerun,Inc (glonnon@ridgerun.com)
+ * Licensed under the GPL
+ */
+
+#include <stddef.h>
+#include <unistd.h>
+#include <errno.h>
+#include <sched.h>
+#include <signal.h>
+#include <string.h>
+#include <netinet/in.h>
+#include <sys/time.h>
+#include <sys/socket.h>
+#include <sys/mman.h>
+#include <sys/param.h>
+#include "asm/types.h"
+#include "user_util.h"
+#include "kern_util.h"
+#include "user.h"
+#include "ubd_user.h"
+#include "os.h"
+#include "cow.h"
+
+#include <endian.h>
+#include <byteswap.h>
+
+void ignore_sigwinch_sig(void)
+{
+	signal(SIGWINCH, SIG_IGN);
+}
+
+int start_io_thread(unsigned long sp, int *fd_out)
+{
+	int pid, fds[2], err;
+
+	err = os_pipe(fds, 1, 1);
+	if(err < 0){
+		printk("start_io_thread - os_pipe failed, err = %d\n", -err);
+		goto out;
+	}
+
+	kernel_fd = fds[0];
+	*fd_out = fds[1];
+
+	pid = clone(io_thread, (void *) sp, CLONE_FILES | CLONE_VM | SIGCHLD,
+		    NULL);
+	if(pid < 0){
+		printk("start_io_thread - clone failed : errno = %d\n", errno);
+		err = -errno;
+		goto out_close;
+	}
+
+	return(pid);
+
+ out_close:
+	os_close_file(fds[0]);
+	os_close_file(fds[1]);
+	kernel_fd = -1;
+	*fd_out = -1;
+ out:
+	return(err);
+}
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/arch/um/drivers/xterm.c b/arch/um/drivers/xterm.c
index 90e0e5ff451e..aaa636661043 100644
--- a/arch/um/drivers/xterm.c
+++ b/arch/um/drivers/xterm.c
@@ -14,7 +14,6 @@
 #include <sys/socket.h>
 #include "kern_util.h"
 #include "chan_user.h"
-#include "helper.h"
 #include "user_util.h"
 #include "user.h"
 #include "os.h"
@@ -195,13 +194,6 @@ static void xterm_free(void *d)
 	free(d);
 }
 
-static int xterm_console_write(int fd, const char *buf, int n, void *d)
-{
-	struct xterm_chan *data = d;
-
-	return(generic_console_write(fd, buf, n, &data->tt));
-}
-
 struct chan_ops xterm_ops = {
 	.type		= "xterm",
 	.init		= xterm_init,
@@ -209,7 +201,7 @@ struct chan_ops xterm_ops = {
 	.close		= xterm_close,
 	.read		= generic_read,
 	.write		= generic_write,
-	.console_write	= xterm_console_write,
+	.console_write	= generic_console_write,
 	.window_size	= generic_window_size,
 	.free		= xterm_free,
 	.winch		= 1,
diff --git a/arch/um/include/aio.h b/arch/um/include/aio.h
index 83f16877ab08..423bae9153f8 100644
--- a/arch/um/include/aio.h
+++ b/arch/um/include/aio.h
@@ -14,27 +14,15 @@ struct aio_thread_reply {
 };
 
 struct aio_context {
-	enum aio_type type;
-	int fd;
-	void *data;
-	int len;
-	unsigned long long offset;
 	int reply_fd;
 	struct aio_context *next;
 };
 
-#define INIT_AIO(aio_type, aio_fd, aio_data, aio_len, aio_offset, \
-		 aio_reply_fd) \
-	{ .type 	= aio_type, \
-	  .fd		= aio_fd, \
-	  .data		= aio_data, \
-	  .len		= aio_len, \
-	  .offset	= aio_offset, \
-	  .reply_fd	= aio_reply_fd }
-
 #define INIT_AIO_CONTEXT { .reply_fd	= -1, \
 			   .next	= NULL }
 
-extern int submit_aio(struct aio_context *aio);
+extern int submit_aio(enum aio_type type, int fd, char *buf, int len,
+		      unsigned long long offset, int reply_fd,
+                      struct aio_context *aio);
 
 #endif
diff --git a/arch/um/include/chan_user.h b/arch/um/include/chan_user.h
index f77d9aa4c164..659bb3cac32f 100644
--- a/arch/um/include/chan_user.h
+++ b/arch/um/include/chan_user.h
@@ -25,7 +25,7 @@ struct chan_ops {
 	void (*close)(int, void *);
 	int (*read)(int, char *, void *);
 	int (*write)(int, const char *, int, void *);
-	int (*console_write)(int, const char *, int, void *);
+	int (*console_write)(int, const char *, int);
 	int (*window_size)(int, void *, unsigned short *, unsigned short *);
 	void (*free)(void *);
 	int winch;
@@ -37,7 +37,7 @@ extern struct chan_ops fd_ops, null_ops, port_ops, pts_ops, pty_ops, tty_ops,
 extern void generic_close(int fd, void *unused);
 extern int generic_read(int fd, char *c_out, void *unused);
 extern int generic_write(int fd, const char *buf, int n, void *unused);
-extern int generic_console_write(int fd, const char *buf, int n, void *state);
+extern int generic_console_write(int fd, const char *buf, int n);
 extern int generic_window_size(int fd, void *unused, unsigned short *rows_out,
 			       unsigned short *cols_out);
 extern void generic_free(void *data);
diff --git a/arch/um/include/common-offsets.h b/arch/um/include/common-offsets.h
index 782ac3a3baf9..356390d1f8b9 100644
--- a/arch/um/include/common-offsets.h
+++ b/arch/um/include/common-offsets.h
@@ -1,7 +1,7 @@
 /* for use by sys-$SUBARCH/kernel-offsets.c */
 
-OFFSET(TASK_REGS, task_struct, thread.regs);
-OFFSET(TASK_PID, task_struct, pid);
+OFFSET(HOST_TASK_REGS, task_struct, thread.regs);
+OFFSET(HOST_TASK_PID, task_struct, pid);
 DEFINE(UM_KERN_PAGE_SIZE, PAGE_SIZE);
 DEFINE(UM_NSEC_PER_SEC, NSEC_PER_SEC);
 DEFINE_STR(UM_KERN_EMERG, KERN_EMERG);
diff --git a/arch/um/include/helper.h b/arch/um/include/helper.h
deleted file mode 100644
index 162ac31192fd..000000000000
--- a/arch/um/include/helper.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* 
- * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#ifndef __HELPER_H__
-#define __HELPER_H__
-
-extern int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv,
-		      unsigned long *stack_out);
-extern int run_helper_thread(int (*proc)(void *), void *arg, 
-			     unsigned int flags, unsigned long *stack_out,
-			     int stack_order);
-extern int helper_wait(int pid);
-
-#endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/include/mem_user.h b/arch/um/include/mem_user.h
index 9fef4123a65a..a1064c5823bf 100644
--- a/arch/um/include/mem_user.h
+++ b/arch/um/include/mem_user.h
@@ -57,7 +57,7 @@ extern int init_maps(unsigned long physmem, unsigned long iomem,
 		     unsigned long highmem);
 extern unsigned long get_vm(unsigned long len);
 extern void setup_physmem(unsigned long start, unsigned long usable,
-			  unsigned long len, unsigned long highmem);
+			  unsigned long len, unsigned long long highmem);
 extern void add_iomem(char *name, int fd, unsigned long size);
 extern unsigned long phys_offset(unsigned long phys);
 extern void unmap_physmem(void);
diff --git a/arch/um/include/net_kern.h b/arch/um/include/net_kern.h
index 1c07949a13d6..f7de6df60dd7 100644
--- a/arch/um/include/net_kern.h
+++ b/arch/um/include/net_kern.h
@@ -6,10 +6,11 @@
 #ifndef __UM_NET_KERN_H
 #define __UM_NET_KERN_H
 
-#include "linux/netdevice.h"
-#include "linux/skbuff.h"
-#include "linux/socket.h"
-#include "linux/list.h"
+#include <linux/netdevice.h>
+#include <linux/platform_device.h>
+#include <linux/skbuff.h>
+#include <linux/socket.h>
+#include <linux/list.h>
 
 struct uml_net {
 	struct list_head list;
diff --git a/arch/um/include/net_user.h b/arch/um/include/net_user.h
index 89885a77a771..800c403920bc 100644
--- a/arch/um/include/net_user.h
+++ b/arch/um/include/net_user.h
@@ -25,7 +25,7 @@ struct net_user_info {
 };
 
 extern void ether_user_init(void *data, void *dev);
-extern void dev_ip_addr(void *d, char *buf, char *bin_buf);
+extern void dev_ip_addr(void *d, unsigned char *bin_buf);
 extern void set_ether_mac(void *d, unsigned char *addr);
 extern void iter_addresses(void *d, void (*cb)(unsigned char *, 
 					       unsigned char *, void *), 
diff --git a/arch/um/include/os.h b/arch/um/include/os.h
index 583329d0a539..2cccfa5b8ab5 100644
--- a/arch/um/include/os.h
+++ b/arch/um/include/os.h
@@ -6,6 +6,7 @@
 #ifndef __OS_H__
 #define __OS_H__
 
+#include "uml-config.h"
 #include "asm/types.h"
 #include "../os/include/file.h"
 
@@ -157,8 +158,16 @@ extern int os_lock_file(int fd, int excl);
 extern void os_early_checks(void);
 extern int can_do_skas(void);
 
+/* Make sure they are clear when running in TT mode. Required by
+ * SEGV_MAYBE_FIXABLE */
+#ifdef UML_CONFIG_MODE_SKAS
+#define clear_can_do_skas() do { ptrace_faultinfo = proc_mm = 0; } while (0)
+#else
+#define clear_can_do_skas() do {} while (0)
+#endif
+
 /* mem.c */
-extern int create_mem_file(unsigned long len);
+extern int create_mem_file(unsigned long long len);
 
 /* process.c */
 extern unsigned long os_process_pc(int pid);
@@ -190,6 +199,20 @@ extern void forward_pending_sigio(int target);
 extern int start_fork_tramp(void *arg, unsigned long temp_stack,
 			    int clone_flags, int (*tramp)(void *));
 
+/* uaccess.c */
+extern unsigned long __do_user_copy(void *to, const void *from, int n,
+				    void **fault_addr, void **fault_catcher,
+				    void (*op)(void *to, const void *from,
+					       int n), int *faulted_out);
+
+/* helper.c */
+extern int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv,
+		      unsigned long *stack_out);
+extern int run_helper_thread(int (*proc)(void *), void *arg,
+			     unsigned int flags, unsigned long *stack_out,
+			     int stack_order);
+extern int helper_wait(int pid);
+
 #endif
 
 /*
diff --git a/arch/um/include/registers.h b/arch/um/include/registers.h
index 0a35e6d0baa0..4892e5fcef07 100644
--- a/arch/um/include/registers.h
+++ b/arch/um/include/registers.h
@@ -15,16 +15,6 @@ extern void save_registers(int pid, union uml_pt_regs *regs);
 extern void restore_registers(int pid, union uml_pt_regs *regs);
 extern void init_registers(int pid);
 extern void get_safe_registers(unsigned long * regs);
+extern void get_thread_regs(union uml_pt_regs *uml_regs, void *buffer);
 
 #endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/include/skas_ptregs.h b/arch/um/include/skas_ptregs.h
new file mode 100644
index 000000000000..73db19e9c077
--- /dev/null
+++ b/arch/um/include/skas_ptregs.h
@@ -0,0 +1,6 @@
+#ifndef __SKAS_PT_REGS_
+#define __SKAS_PT_REGS_
+
+#include <user_constants.h>
+
+#endif
diff --git a/arch/um/include/sysdep-i386/sc.h b/arch/um/include/sysdep-i386/sc.h
new file mode 100644
index 000000000000..c57d1780ad37
--- /dev/null
+++ b/arch/um/include/sysdep-i386/sc.h
@@ -0,0 +1,44 @@
+#ifndef __SYSDEP_I386_SC_H
+#define __SYSDEP_I386_SC_H
+
+#include <user_constants.h>
+
+#define SC_OFFSET(sc, field) \
+	*((unsigned long *) &(((char *) (sc))[HOST_##field]))
+#define SC_FP_OFFSET(sc, field) \
+	*((unsigned long *) &(((char *) (SC_FPSTATE(sc)))[HOST_##field]))
+#define SC_FP_OFFSET_PTR(sc, field, type) \
+	((type *) &(((char *) (SC_FPSTATE(sc)))[HOST_##field]))
+
+#define SC_IP(sc) SC_OFFSET(sc, SC_IP)
+#define SC_SP(sc) SC_OFFSET(sc, SC_SP)
+#define SC_FS(sc) SC_OFFSET(sc, SC_FS)
+#define SC_GS(sc) SC_OFFSET(sc, SC_GS)
+#define SC_DS(sc) SC_OFFSET(sc, SC_DS)
+#define SC_ES(sc) SC_OFFSET(sc, SC_ES)
+#define SC_SS(sc) SC_OFFSET(sc, SC_SS)
+#define SC_CS(sc) SC_OFFSET(sc, SC_CS)
+#define SC_EFLAGS(sc) SC_OFFSET(sc, SC_EFLAGS)
+#define SC_EAX(sc) SC_OFFSET(sc, SC_EAX)
+#define SC_EBX(sc) SC_OFFSET(sc, SC_EBX)
+#define SC_ECX(sc) SC_OFFSET(sc, SC_ECX)
+#define SC_EDX(sc) SC_OFFSET(sc, SC_EDX)
+#define SC_EDI(sc) SC_OFFSET(sc, SC_EDI)
+#define SC_ESI(sc) SC_OFFSET(sc, SC_ESI)
+#define SC_EBP(sc) SC_OFFSET(sc, SC_EBP)
+#define SC_TRAPNO(sc) SC_OFFSET(sc, SC_TRAPNO)
+#define SC_ERR(sc) SC_OFFSET(sc, SC_ERR)
+#define SC_CR2(sc) SC_OFFSET(sc, SC_CR2)
+#define SC_FPSTATE(sc) SC_OFFSET(sc, SC_FPSTATE)
+#define SC_SIGMASK(sc) SC_OFFSET(sc, SC_SIGMASK)
+#define SC_FP_CW(sc) SC_FP_OFFSET(sc, SC_FP_CW)
+#define SC_FP_SW(sc) SC_FP_OFFSET(sc, SC_FP_SW)
+#define SC_FP_TAG(sc) SC_FP_OFFSET(sc, SC_FP_TAG)
+#define SC_FP_IPOFF(sc) SC_FP_OFFSET(sc, SC_FP_IPOFF)
+#define SC_FP_CSSEL(sc) SC_FP_OFFSET(sc, SC_FP_CSSEL)
+#define SC_FP_DATAOFF(sc) SC_FP_OFFSET(sc, SC_FP_DATAOFF)
+#define SC_FP_DATASEL(sc) SC_FP_OFFSET(sc, SC_FP_DATASEL)
+#define SC_FP_ST(sc) SC_FP_OFFSET_PTR(sc, SC_FP_ST, struct _fpstate)
+#define SC_FXSR_ENV(sc) SC_FP_OFFSET_PTR(sc, SC_FXSR_ENV, void)
+
+#endif
diff --git a/arch/um/include/sysdep-i386/sigcontext.h b/arch/um/include/sysdep-i386/sigcontext.h
index 1fe729265167..23fd2644d7ed 100644
--- a/arch/um/include/sysdep-i386/sigcontext.h
+++ b/arch/um/include/sysdep-i386/sigcontext.h
@@ -6,6 +6,7 @@
 #ifndef __SYS_SIGCONTEXT_I386_H
 #define __SYS_SIGCONTEXT_I386_H
 
+#include "uml-config.h"
 #include <sysdep/sc.h>
 
 #define IP_RESTART_SYSCALL(ip) ((ip) -= 2)
@@ -26,7 +27,14 @@
 #define SC_START_SYSCALL(sc) do SC_EAX(sc) = -ENOSYS; while(0)
 
 /* This is Page Fault */
-#define SEGV_IS_FIXABLE(fi) ((fi)->trap_no == 14)
+#define SEGV_IS_FIXABLE(fi)	((fi)->trap_no == 14)
+
+/* SKAS3 has no trap_no on i386, but get_skas_faultinfo() sets it to 0. */
+#ifdef UML_CONFIG_MODE_SKAS
+#define SEGV_MAYBE_FIXABLE(fi)	((fi)->trap_no == 0 && ptrace_faultinfo)
+#else
+#define SEGV_MAYBE_FIXABLE(fi)	0
+#endif
 
 extern unsigned long *sc_sigmask(void *sc_ptr);
 extern int sc_get_fpregs(unsigned long buf, void *sc_ptr);
diff --git a/arch/um/include/sysdep-i386/stub.h b/arch/um/include/sysdep-i386/stub.h
index d3699fe1c613..6ba8cbbe0d36 100644
--- a/arch/um/include/sysdep-i386/stub.h
+++ b/arch/um/include/sysdep-i386/stub.h
@@ -16,45 +16,78 @@ extern void stub_clone_handler(void);
 #define STUB_MMAP_NR __NR_mmap2
 #define MMAP_OFFSET(o) ((o) >> PAGE_SHIFT)
 
+static inline long stub_syscall0(long syscall)
+{
+	long ret;
+
+	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall));
+
+	return ret;
+}
+
+static inline long stub_syscall1(long syscall, long arg1)
+{
+	long ret;
+
+	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1));
+
+	return ret;
+}
+
 static inline long stub_syscall2(long syscall, long arg1, long arg2)
 {
 	long ret;
 
-	__asm__("movl %0, %%ecx; " : : "g" (arg2) : "%ecx");
-	__asm__("movl %0, %%ebx; " : : "g" (arg1) : "%ebx");
-	__asm__("movl %0, %%eax; " : : "g" (syscall) : "%eax");
-	__asm__("int $0x80;" : : : "%eax");
-	__asm__ __volatile__("movl %%eax, %0; " : "=g" (ret) :);
-	return(ret);
+	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1),
+			"c" (arg2));
+
+	return ret;
 }
 
 static inline long stub_syscall3(long syscall, long arg1, long arg2, long arg3)
 {
-	__asm__("movl %0, %%edx; " : : "g" (arg3) : "%edx");
-	return(stub_syscall2(syscall, arg1, arg2));
+	long ret;
+
+	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1),
+			"c" (arg2), "d" (arg3));
+
+	return ret;
 }
 
 static inline long stub_syscall4(long syscall, long arg1, long arg2, long arg3,
 				 long arg4)
 {
-	__asm__("movl %0, %%esi; " : : "g" (arg4) : "%esi");
-	return(stub_syscall3(syscall, arg1, arg2, arg3));
+	long ret;
+
+	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1),
+			"c" (arg2), "d" (arg3), "S" (arg4));
+
+	return ret;
+}
+
+static inline long stub_syscall5(long syscall, long arg1, long arg2, long arg3,
+				 long arg4, long arg5)
+{
+	long ret;
+
+	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1),
+			"c" (arg2), "d" (arg3), "S" (arg4), "D" (arg5));
+
+	return ret;
 }
 
 static inline long stub_syscall6(long syscall, long arg1, long arg2, long arg3,
 				 long arg4, long arg5, long arg6)
 {
 	long ret;
-	__asm__("movl %0, %%eax; " : : "g" (syscall) : "%eax");
-	__asm__("movl %0, %%ebx; " : : "g" (arg1) : "%ebx");
-	__asm__("movl %0, %%ecx; " : : "g" (arg2) : "%ecx");
-	__asm__("movl %0, %%edx; " : : "g" (arg3) : "%edx");
-	__asm__("movl %0, %%esi; " : : "g" (arg4) : "%esi");
-	__asm__("movl %0, %%edi; " : : "g" (arg5) : "%edi");
-	__asm__ __volatile__("pushl %%ebp ; movl %1, %%ebp; "
-		"int $0x80; popl %%ebp ; "
-		"movl %%eax, %0; " : "=g" (ret) : "g" (arg6) : "%eax");
-	return(ret);
+
+	__asm__ volatile ("push %%ebp ; movl %%eax,%%ebp ; movl %1,%%eax ; "
+			"int $0x80 ; pop %%ebp"
+			: "=a" (ret)
+			: "g" (syscall), "b" (arg1), "c" (arg2), "d" (arg3),
+			  "S" (arg4), "D" (arg5), "0" (arg6));
+
+	return ret;
 }
 
 static inline void trap_myself(void)
diff --git a/arch/um/include/sysdep-i386/syscalls.h b/arch/um/include/sysdep-i386/syscalls.h
index a0d5b74d3731..57bd79efbee3 100644
--- a/arch/um/include/sysdep-i386/syscalls.h
+++ b/arch/um/include/sysdep-i386/syscalls.h
@@ -11,7 +11,6 @@ typedef long syscall_handler_t(struct pt_regs);
 /* Not declared on x86, incompatible declarations on x86_64, so these have
  * to go here rather than in sys_call_table.c
  */
-extern syscall_handler_t sys_ptrace;
 extern syscall_handler_t sys_rt_sigaction;
 
 extern syscall_handler_t old_mmap_i386;
diff --git a/arch/um/include/sysdep-i386/thread.h b/arch/um/include/sysdep-i386/thread.h
new file mode 100644
index 000000000000..243fed44d780
--- /dev/null
+++ b/arch/um/include/sysdep-i386/thread.h
@@ -0,0 +1,11 @@
+#ifndef __UM_THREAD_H
+#define __UM_THREAD_H
+
+#include <kern_constants.h>
+
+#define TASK_DEBUGREGS(task) ((unsigned long *) &(((char *) (task))[HOST_TASK_DEBUGREGS]))
+#ifdef UML_CONFIG_MODE_TT
+#define TASK_EXTERN_PID(task) *((int *) &(((char *) (task))[HOST_TASK_EXTERN_PID]))
+#endif
+
+#endif
diff --git a/arch/um/include/sysdep-x86_64/ptrace.h b/arch/um/include/sysdep-x86_64/ptrace.h
index 331aa2d1f3f5..8d353f0feec1 100644
--- a/arch/um/include/sysdep-x86_64/ptrace.h
+++ b/arch/um/include/sysdep-x86_64/ptrace.h
@@ -183,10 +183,6 @@ struct syscall_args {
                 case RBP: val = UPT_RBP(regs); break; \
                 case ORIG_RAX: val = UPT_ORIG_RAX(regs); break; \
                 case CS: val = UPT_CS(regs); break; \
-                case DS: val = UPT_DS(regs); break; \
-                case ES: val = UPT_ES(regs); break; \
-                case FS: val = UPT_FS(regs); break; \
-                case GS: val = UPT_GS(regs); break; \
                 case EFLAGS: val = UPT_EFLAGS(regs); break; \
                 default :  \
                         panic("Bad register in UPT_REG : %d\n", reg);  \
@@ -218,10 +214,6 @@ struct syscall_args {
                 case RBP: UPT_RBP(regs) = __upt_val; break; \
                 case ORIG_RAX: UPT_ORIG_RAX(regs) = __upt_val; break; \
                 case CS: UPT_CS(regs) = __upt_val; break; \
-                case DS: UPT_DS(regs) = __upt_val; break; \
-                case ES: UPT_ES(regs) = __upt_val; break; \
-                case FS: UPT_FS(regs) = __upt_val; break; \
-                case GS: UPT_GS(regs) = __upt_val; break; \
                 case EFLAGS: UPT_EFLAGS(regs) = __upt_val; break; \
                 default :  \
                         panic("Bad register in UPT_SET : %d\n", reg);  \
diff --git a/arch/um/include/sysdep-x86_64/sc.h b/arch/um/include/sysdep-x86_64/sc.h
new file mode 100644
index 000000000000..a160d9fcc596
--- /dev/null
+++ b/arch/um/include/sysdep-x86_64/sc.h
@@ -0,0 +1,45 @@
+#ifndef __SYSDEP_X86_64_SC_H
+#define __SYSDEP_X86_64_SC_H
+
+/* Copyright (C) 2003 - 2004 PathScale, Inc
+ * Released under the GPL
+ */
+
+#include <user_constants.h>
+
+#define SC_OFFSET(sc, field) \
+	 *((unsigned long *) &(((char *) (sc))[HOST_##field]))
+
+#define SC_RBX(sc) SC_OFFSET(sc, SC_RBX)
+#define SC_RCX(sc) SC_OFFSET(sc, SC_RCX)
+#define SC_RDX(sc) SC_OFFSET(sc, SC_RDX)
+#define SC_RSI(sc) SC_OFFSET(sc, SC_RSI)
+#define SC_RDI(sc) SC_OFFSET(sc, SC_RDI)
+#define SC_RBP(sc) SC_OFFSET(sc, SC_RBP)
+#define SC_RAX(sc) SC_OFFSET(sc, SC_RAX)
+#define SC_R8(sc) SC_OFFSET(sc, SC_R8)
+#define SC_R9(sc) SC_OFFSET(sc, SC_R9)
+#define SC_R10(sc) SC_OFFSET(sc, SC_R10)
+#define SC_R11(sc) SC_OFFSET(sc, SC_R11)
+#define SC_R12(sc) SC_OFFSET(sc, SC_R12)
+#define SC_R13(sc) SC_OFFSET(sc, SC_R13)
+#define SC_R14(sc) SC_OFFSET(sc, SC_R14)
+#define SC_R15(sc) SC_OFFSET(sc, SC_R15)
+#define SC_IP(sc) SC_OFFSET(sc, SC_IP)
+#define SC_SP(sc) SC_OFFSET(sc, SC_SP)
+#define SC_CR2(sc) SC_OFFSET(sc, SC_CR2)
+#define SC_ERR(sc) SC_OFFSET(sc, SC_ERR)
+#define SC_TRAPNO(sc) SC_OFFSET(sc, SC_TRAPNO)
+#define SC_CS(sc) SC_OFFSET(sc, SC_CS)
+#define SC_FS(sc) SC_OFFSET(sc, SC_FS)
+#define SC_GS(sc) SC_OFFSET(sc, SC_GS)
+#define SC_EFLAGS(sc) SC_OFFSET(sc, SC_EFLAGS)
+#define SC_SIGMASK(sc) SC_OFFSET(sc, SC_SIGMASK)
+#if 0
+#define SC_ORIG_RAX(sc) SC_OFFSET(sc, SC_ORIG_RAX)
+#define SC_DS(sc) SC_OFFSET(sc, SC_DS)
+#define SC_ES(sc) SC_OFFSET(sc, SC_ES)
+#define SC_SS(sc) SC_OFFSET(sc, SC_SS)
+#endif
+
+#endif
diff --git a/arch/um/include/sysdep-x86_64/sigcontext.h b/arch/um/include/sysdep-x86_64/sigcontext.h
index 2a78260d15a0..41073235e7ad 100644
--- a/arch/um/include/sysdep-x86_64/sigcontext.h
+++ b/arch/um/include/sysdep-x86_64/sigcontext.h
@@ -31,7 +31,10 @@
 #define SC_START_SYSCALL(sc) do SC_RAX(sc) = -ENOSYS; while(0)
 
 /* This is Page Fault */
-#define SEGV_IS_FIXABLE(fi) ((fi)->trap_no == 14)
+#define SEGV_IS_FIXABLE(fi)	((fi)->trap_no == 14)
+
+/* No broken SKAS API, which doesn't pass trap_no, here. */
+#define SEGV_MAYBE_FIXABLE(fi)	0
 
 extern unsigned long *sc_sigmask(void *sc_ptr);
 
diff --git a/arch/um/include/sysdep-x86_64/stub.h b/arch/um/include/sysdep-x86_64/stub.h
index f599058d8263..c41689c13dc9 100644
--- a/arch/um/include/sysdep-x86_64/stub.h
+++ b/arch/um/include/sysdep-x86_64/stub.h
@@ -6,7 +6,6 @@
 #ifndef __SYSDEP_STUB_H
 #define __SYSDEP_STUB_H
 
-#include <asm/ptrace.h>
 #include <asm/unistd.h>
 #include <sysdep/ptrace_user.h>
 
@@ -17,37 +16,83 @@ extern void stub_clone_handler(void);
 #define STUB_MMAP_NR __NR_mmap
 #define MMAP_OFFSET(o) (o)
 
+#define __syscall_clobber "r11","rcx","memory"
+#define __syscall "syscall"
+
+static inline long stub_syscall0(long syscall)
+{
+	long ret;
+
+	__asm__ volatile (__syscall
+		: "=a" (ret)
+		: "0" (syscall) : __syscall_clobber );
+
+	return ret;
+}
+
 static inline long stub_syscall2(long syscall, long arg1, long arg2)
 {
 	long ret;
 
-	__asm__("movq %0, %%rsi; " : : "g" (arg2) : "%rsi");
-	__asm__("movq %0, %%rdi; " : : "g" (arg1) : "%rdi");
-	__asm__("movq %0, %%rax; " : : "g" (syscall) : "%rax");
-	__asm__("syscall;" : : : "%rax", "%r11", "%rcx");
-	__asm__ __volatile__("movq %%rax, %0; " : "=g" (ret) :);
-	return(ret);
+	__asm__ volatile (__syscall
+		: "=a" (ret)
+		: "0" (syscall), "D" (arg1), "S" (arg2) : __syscall_clobber );
+
+	return ret;
 }
 
 static inline long stub_syscall3(long syscall, long arg1, long arg2, long arg3)
 {
-	__asm__("movq %0, %%rdx; " : : "g" (arg3) : "%rdx");
-	return(stub_syscall2(syscall, arg1, arg2));
+	long ret;
+
+	__asm__ volatile (__syscall
+		: "=a" (ret)
+		: "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3)
+		: __syscall_clobber );
+
+	return ret;
 }
 
 static inline long stub_syscall4(long syscall, long arg1, long arg2, long arg3,
 				 long arg4)
 {
-	__asm__("movq %0, %%r10; " : : "g" (arg4) : "%r10");
-	return(stub_syscall3(syscall, arg1, arg2, arg3));
+	long ret;
+
+	__asm__ volatile ("movq %5,%%r10 ; " __syscall
+		: "=a" (ret)
+		: "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3),
+		  "g" (arg4)
+		: __syscall_clobber, "r10" );
+
+	return ret;
+}
+
+static inline long stub_syscall5(long syscall, long arg1, long arg2, long arg3,
+				 long arg4, long arg5)
+{
+	long ret;
+
+	__asm__ volatile ("movq %5,%%r10 ; movq %6,%%r8 ; " __syscall
+		: "=a" (ret)
+		: "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3),
+		  "g" (arg4), "g" (arg5)
+		: __syscall_clobber, "r10", "r8" );
+
+	return ret;
 }
 
 static inline long stub_syscall6(long syscall, long arg1, long arg2, long arg3,
 				 long arg4, long arg5, long arg6)
 {
-	__asm__("movq %0, %%r9; " : : "g" (arg6) : "%r9");
-	__asm__("movq %0, %%r8; " : : "g" (arg5) : "%r8");
-	return(stub_syscall4(syscall, arg1, arg2, arg3, arg4));
+	long ret;
+
+	__asm__ volatile ("movq %5,%%r10 ; movq %6,%%r8 ; "
+		"movq %7, %%r9; " __syscall : "=a" (ret)
+		: "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3),
+		  "g" (arg4), "g" (arg5), "g" (arg6)
+		: __syscall_clobber, "r10", "r8", "r9" );
+
+	return ret;
 }
 
 static inline void trap_myself(void)
diff --git a/arch/um/include/sysdep-x86_64/thread.h b/arch/um/include/sysdep-x86_64/thread.h
new file mode 100644
index 000000000000..cbef3e1697f4
--- /dev/null
+++ b/arch/um/include/sysdep-x86_64/thread.h
@@ -0,0 +1,10 @@
+#ifndef __UM_THREAD_H
+#define __UM_THREAD_H
+
+#include <kern_constants.h>
+
+#ifdef UML_CONFIG_MODE_TT
+#define TASK_EXTERN_PID(task) *((int *) &(((char *) (task))[HOST_TASK_EXTERN_PID]))
+#endif
+
+#endif
diff --git a/arch/um/include/task.h b/arch/um/include/task.h
new file mode 100644
index 000000000000..6375ba7203c9
--- /dev/null
+++ b/arch/um/include/task.h
@@ -0,0 +1,9 @@
+#ifndef __TASK_H
+#define __TASK_H
+
+#include <kern_constants.h>
+
+#define TASK_REGS(task) ((union uml_pt_regs *) &(((char *) (task))[HOST_TASK_REGS]))
+#define TASK_PID(task) *((int *) &(((char *) (task))[HOST_TASK_PID]))
+
+#endif
diff --git a/arch/um/include/tlb.h b/arch/um/include/tlb.h
index 45d7da6c3b2c..8efc1e0f1b84 100644
--- a/arch/um/include/tlb.h
+++ b/arch/um/include/tlb.h
@@ -34,7 +34,6 @@ struct host_vm_op {
 	} u;
 };
 
-extern void mprotect_kernel_vm(int w);
 extern void force_flush_all(void);
 extern void fix_range_common(struct mm_struct *mm, unsigned long start_addr,
                              unsigned long end_addr, int force,
diff --git a/arch/um/include/um_uaccess.h b/arch/um/include/um_uaccess.h
index 84c0868cd561..f8760a3f43b0 100644
--- a/arch/um/include/um_uaccess.h
+++ b/arch/um/include/um_uaccess.h
@@ -17,8 +17,25 @@
 #include "uaccess-skas.h"
 #endif
 
+#define __under_task_size(addr, size) \
+	(((unsigned long) (addr) < TASK_SIZE) && \
+         (((unsigned long) (addr) + (size)) < TASK_SIZE))
+
+#define __access_ok_vsyscall(type, addr, size) \
+	 ((type == VERIFY_READ) && \
+	  ((unsigned long) (addr) >= FIXADDR_USER_START) && \
+	  ((unsigned long) (addr) + (size) <= FIXADDR_USER_END) && \
+	  ((unsigned long) (addr) + (size) >= (unsigned long)(addr)))
+
+#define __addr_range_nowrap(addr, size) \
+	((unsigned long) (addr) <= ((unsigned long) (addr) + (size)))
+
 #define access_ok(type, addr, size) \
-	CHOOSE_MODE_PROC(access_ok_tt, access_ok_skas, type, addr, size)
+	(__addr_range_nowrap(addr, size) && \
+	 (__under_task_size(addr, size) || \
+	  __access_ok_vsyscall(type, addr, size) || \
+	  segment_eq(get_fs(), KERNEL_DS) || \
+	  CHOOSE_MODE_PROC(access_ok_tt, access_ok_skas, type, addr, size)))
 
 static inline int copy_from_user(void *to, const void __user *from, int n)
 {
diff --git a/arch/um/include/uml_uaccess.h b/arch/um/include/uml_uaccess.h
index f77eb6428453..c0df11d06f5e 100644
--- a/arch/um/include/uml_uaccess.h
+++ b/arch/um/include/uml_uaccess.h
@@ -8,10 +8,6 @@
 
 extern int __do_copy_to_user(void *to, const void *from, int n,
 			     void **fault_addr, void **fault_catcher);
-extern unsigned long __do_user_copy(void *to, const void *from, int n,
-				    void **fault_addr, void **fault_catcher,
-				    void (*op)(void *to, const void *from,
-					       int n), int *faulted_out);
 void __do_copy(void *to, const void *from, int n);
 
 #endif
diff --git a/arch/um/include/user.h b/arch/um/include/user.h
index 57ee9e261228..0f865ef46918 100644
--- a/arch/um/include/user.h
+++ b/arch/um/include/user.h
@@ -14,7 +14,9 @@ extern void *um_kmalloc_atomic(int size);
 extern void kfree(void *ptr);
 extern int in_aton(char *str);
 extern int open_gdb_chan(void);
-extern int strlcpy(char *, const char *, int);
+/* These use size_t, however unsigned long is correct on both i386 and x86_64. */
+extern unsigned long strlcpy(char *, const char *, unsigned long);
+extern unsigned long strlcat(char *, const char *, unsigned long);
 extern void *um_vmalloc(int size);
 extern void vfree(void *ptr);
 
diff --git a/arch/um/kernel/Makefile b/arch/um/kernel/Makefile
index 1a0001b3850c..3de9d21e36bf 100644
--- a/arch/um/kernel/Makefile
+++ b/arch/um/kernel/Makefile
@@ -7,10 +7,10 @@ extra-y := vmlinux.lds
 clean-files :=
 
 obj-y = config.o exec_kern.o exitcode.o \
-	helper.o init_task.o irq.o irq_user.o ksyms.o main.o mem.o physmem.o \
+	init_task.o irq.o irq_user.o ksyms.o mem.o physmem.o \
 	process_kern.o ptrace.o reboot.o resource.o sigio_user.o sigio_kern.o \
 	signal_kern.o signal_user.o smp.o syscall_kern.o sysrq.o time.o \
-	time_kern.o tlb.o trap_kern.o trap_user.o uaccess_user.o um_arch.o \
+	time_kern.o tlb.o trap_kern.o trap_user.o uaccess.o um_arch.o \
 	umid.o user_util.o
 
 obj-$(CONFIG_BLK_DEV_INITRD) += initrd.o
@@ -24,8 +24,7 @@ obj-$(CONFIG_MODE_SKAS) += skas/
 
 user-objs-$(CONFIG_TTY_LOG) += tty_log.o
 
-USER_OBJS := $(user-objs-y) config.o helper.o main.o time.o tty_log.o umid.o \
-	user_util.o
+USER_OBJS := $(user-objs-y) config.o time.o tty_log.o umid.o user_util.o
 
 include arch/um/scripts/Makefile.rules
 
diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c
index dcd814971995..bbf94bf2921e 100644
--- a/arch/um/kernel/irq.c
+++ b/arch/um/kernel/irq.c
@@ -9,7 +9,6 @@
 #include "linux/kernel.h"
 #include "linux/module.h"
 #include "linux/smp.h"
-#include "linux/irq.h"
 #include "linux/kernel_stat.h"
 #include "linux/interrupt.h"
 #include "linux/random.h"
diff --git a/arch/um/kernel/ksyms.c b/arch/um/kernel/ksyms.c
index a97a72e516aa..7713e7a6f476 100644
--- a/arch/um/kernel/ksyms.c
+++ b/arch/um/kernel/ksyms.c
@@ -20,7 +20,6 @@
 #include "user_util.h"
 #include "mem_user.h"
 #include "os.h"
-#include "helper.h"
 
 EXPORT_SYMBOL(stop);
 EXPORT_SYMBOL(uml_physmem);
diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c
index ea008b031a8f..fa4f915be5c5 100644
--- a/arch/um/kernel/mem.c
+++ b/arch/um/kernel/mem.c
@@ -234,8 +234,8 @@ void paging_init(void)
 	empty_bad_page = (unsigned long *) alloc_bootmem_low_pages(PAGE_SIZE);
 	for(i=0;i<sizeof(zones_size)/sizeof(zones_size[0]);i++) 
 		zones_size[i] = 0;
-	zones_size[0] = (end_iomem >> PAGE_SHIFT) - (uml_physmem >> PAGE_SHIFT);
-	zones_size[2] = highmem >> PAGE_SHIFT;
+	zones_size[ZONE_DMA] = (end_iomem >> PAGE_SHIFT) - (uml_physmem >> PAGE_SHIFT);
+	zones_size[ZONE_HIGHMEM] = highmem >> PAGE_SHIFT;
 	free_area_init(zones_size);
 
 	/*
@@ -252,7 +252,7 @@ void paging_init(void)
 #endif
 }
 
-struct page *arch_validate(struct page *page, int mask, int order)
+struct page *arch_validate(struct page *page, gfp_t mask, int order)
 {
 	unsigned long addr, zero = 0;
 	int i;
diff --git a/arch/um/kernel/physmem.c b/arch/um/kernel/physmem.c
index ea670fcc8af5..f3b583a878a6 100644
--- a/arch/um/kernel/physmem.c
+++ b/arch/um/kernel/physmem.c
@@ -246,7 +246,7 @@ int is_remapped(void *virt)
 /* Changed during early boot */
 unsigned long high_physmem;
 
-extern unsigned long physmem_size;
+extern unsigned long long physmem_size;
 
 int init_maps(unsigned long physmem, unsigned long iomem, unsigned long highmem)
 {
@@ -321,7 +321,7 @@ void map_memory(unsigned long virt, unsigned long phys, unsigned long len,
 extern int __syscall_stub_start, __binary_start;
 
 void setup_physmem(unsigned long start, unsigned long reserve_end,
-		   unsigned long len, unsigned long highmem)
+		   unsigned long len, unsigned long long highmem)
 {
 	unsigned long reserve = reserve_end - start;
 	int pfn = PFN_UP(__pa(reserve_end));
diff --git a/arch/um/kernel/process_kern.c b/arch/um/kernel/process_kern.c
index 39cf568ccfaf..34b54a3e2132 100644
--- a/arch/um/kernel/process_kern.c
+++ b/arch/um/kernel/process_kern.c
@@ -80,9 +80,10 @@ void free_stack(unsigned long stack, int order)
 unsigned long alloc_stack(int order, int atomic)
 {
 	unsigned long page;
-	int flags = GFP_KERNEL;
+	gfp_t flags = GFP_KERNEL;
 
-	if(atomic) flags |= GFP_ATOMIC;
+	if (atomic)
+		flags = GFP_ATOMIC;
 	page = __get_free_pages(flags, order);
 	if(page == 0)
 		return(0);
@@ -221,6 +222,7 @@ void *um_virt_to_phys(struct task_struct *task, unsigned long addr,
 	pud_t *pud;
 	pmd_t *pmd;
 	pte_t *pte;
+	pte_t ptent;
 
 	if(task->mm == NULL) 
 		return(ERR_PTR(-EINVAL));
@@ -237,12 +239,13 @@ void *um_virt_to_phys(struct task_struct *task, unsigned long addr,
 		return(ERR_PTR(-EINVAL));
 
 	pte = pte_offset_kernel(pmd, addr);
-	if(!pte_present(*pte)) 
+	ptent = *pte;
+	if(!pte_present(ptent))
 		return(ERR_PTR(-EINVAL));
 
 	if(pte_out != NULL)
-		*pte_out = *pte;
-	return((void *) (pte_val(*pte) & PAGE_MASK) + (addr & ~PAGE_MASK));
+		*pte_out = ptent;
+	return((void *) (pte_val(ptent) & PAGE_MASK) + (addr & ~PAGE_MASK));
 }
 
 char *current_cmd(void)
diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c
index 71af4d503899..98e09395c093 100644
--- a/arch/um/kernel/ptrace.c
+++ b/arch/um/kernel/ptrace.c
@@ -43,53 +43,10 @@ void ptrace_disable(struct task_struct *child)
 extern int peek_user(struct task_struct * child, long addr, long data);
 extern int poke_user(struct task_struct * child, long addr, long data);
 
-long sys_ptrace(long request, long pid, long addr, long data)
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
-	struct task_struct *child;
 	int i, ret;
 
-	lock_kernel();
-	ret = -EPERM;
-	if (request == PTRACE_TRACEME) {
-		/* are we already being traced? */
-		if (current->ptrace & PT_PTRACED)
-			goto out;
-
-		ret = security_ptrace(current->parent, current);
-		if (ret)
- 			goto out;
-
-		/* set the ptrace bit in the process flags. */
-		current->ptrace |= PT_PTRACED;
-		ret = 0;
-		goto out;
-	}
-	ret = -ESRCH;
-	read_lock(&tasklist_lock);
-	child = find_task_by_pid(pid);
-	if (child)
-		get_task_struct(child);
-	read_unlock(&tasklist_lock);
-	if (!child)
-		goto out;
-
-	ret = -EPERM;
-	if (pid == 1)		/* you may not mess with init */
-		goto out_tsk;
-
-	if (request == PTRACE_ATTACH) {
-		ret = ptrace_attach(child);
-		goto out_tsk;
-	}
-
-#ifdef SUBACH_PTRACE_SPECIAL
-        SUBARCH_PTRACE_SPECIAL(child,request,addr,data);
-#endif
-
-	ret = ptrace_check_attach(child, request == PTRACE_KILL);
-	if (ret < 0)
-		goto out_tsk;
-
 	switch (request) {
 		/* when I and D space are separate, these will need to be fixed. */
 	case PTRACE_PEEKTEXT: /* read word at location addr. */ 
@@ -282,10 +239,7 @@ long sys_ptrace(long request, long pid, long addr, long data)
 		ret = ptrace_request(child, request, addr, data);
 		break;
 	}
- out_tsk:
-	put_task_struct(child);
- out:
-	unlock_kernel();
+
 	return ret;
 }
 
diff --git a/arch/um/kernel/sigio_user.c b/arch/um/kernel/sigio_user.c
index e89218958f38..48b1f644b9a6 100644
--- a/arch/um/kernel/sigio_user.c
+++ b/arch/um/kernel/sigio_user.c
@@ -18,7 +18,6 @@
 #include "kern_util.h"
 #include "user_util.h"
 #include "sigio.h"
-#include "helper.h"
 #include "os.h"
 
 /* Changed during early boot */
@@ -225,7 +224,7 @@ static int need_poll(int n)
 		next_poll.used = n;
 		return(0);
 	}
-	if(next_poll.poll != NULL) kfree(next_poll.poll);
+	kfree(next_poll.poll);
 	next_poll.poll = um_kmalloc_atomic(n * sizeof(struct pollfd));
 	if(next_poll.poll == NULL){
 		printk("need_poll : failed to allocate new pollfds\n");
@@ -340,7 +339,7 @@ static int setup_initial_poll(int fd)
 {
 	struct pollfd *p;
 
-	p = um_kmalloc(sizeof(struct pollfd));
+	p = um_kmalloc_atomic(sizeof(struct pollfd));
 	if(p == NULL){
 		printk("setup_initial_poll : failed to allocate poll\n");
 		return(-1);
diff --git a/arch/um/kernel/skas/Makefile b/arch/um/kernel/skas/Makefile
index db36c7c95940..8de471b59c1c 100644
--- a/arch/um/kernel/skas/Makefile
+++ b/arch/um/kernel/skas/Makefile
@@ -6,8 +6,6 @@
 obj-y := clone.o exec_kern.o mem.o mem_user.o mmu.o process.o process_kern.o \
 	syscall.o tlb.o trap_user.o uaccess.o
 
-subdir- := util
-
 USER_OBJS := process.o clone.o
 
 include arch/um/scripts/Makefile.rules
diff --git a/arch/um/kernel/skas/clone.c b/arch/um/kernel/skas/clone.c
index 4dc55f10cd18..cb37ce9124a6 100644
--- a/arch/um/kernel/skas/clone.c
+++ b/arch/um/kernel/skas/clone.c
@@ -9,18 +9,24 @@
 #include "stub-data.h"
 #include "uml-config.h"
 #include "sysdep/stub.h"
+#include "kern_constants.h"
 
 /* This is in a separate file because it needs to be compiled with any
  * extraneous gcc flags (-pg, -fprofile-arcs, -ftest-coverage) disabled
+ *
+ * Use UM_KERN_PAGE_SIZE instead of PAGE_SIZE because that calls getpagesize
+ * on some systems.
  */
+
+#define STUB_DATA(field) (((struct stub_data *) UML_CONFIG_STUB_DATA)->field)
+
 void __attribute__ ((__section__ (".__syscall_stub")))
 stub_clone_handler(void)
 {
 	long err;
-	struct stub_data *from = (struct stub_data *) UML_CONFIG_STUB_DATA;
 
 	err = stub_syscall2(__NR_clone, CLONE_PARENT | CLONE_FILES | SIGCHLD,
-			    UML_CONFIG_STUB_DATA + PAGE_SIZE / 2 -
+			    UML_CONFIG_STUB_DATA + UM_KERN_PAGE_SIZE / 2 -
 			    sizeof(void *));
 	if(err != 0)
 		goto out;
@@ -30,15 +36,16 @@ stub_clone_handler(void)
 		goto out;
 
 	err = stub_syscall3(__NR_setitimer, ITIMER_VIRTUAL,
-			    (long) &from->timer, 0);
+			    (long) &STUB_DATA(timer), 0);
 	if(err)
 		goto out;
 
-	err = stub_syscall6(STUB_MMAP_NR, UML_CONFIG_STUB_DATA, PAGE_SIZE,
-			    PROT_READ | PROT_WRITE, MAP_FIXED | MAP_SHARED,
-			    from->fd, from->offset);
+	err = stub_syscall6(STUB_MMAP_NR, UML_CONFIG_STUB_DATA,
+			    UM_KERN_PAGE_SIZE, PROT_READ | PROT_WRITE,
+			    MAP_FIXED | MAP_SHARED, STUB_DATA(fd),
+			    STUB_DATA(offset));
  out:
 	/* save current result. Parent: pid; child: retcode of mmap */
-	from->err = err;
+	STUB_DATA(err) = err;
 	trap_myself();
 }
diff --git a/arch/um/kernel/skas/include/mmu-skas.h b/arch/um/kernel/skas/include/mmu-skas.h
index 09536f81ee42..44110c521e49 100644
--- a/arch/um/kernel/skas/include/mmu-skas.h
+++ b/arch/um/kernel/skas/include/mmu-skas.h
@@ -8,6 +8,7 @@
 
 #include "linux/config.h"
 #include "mm_id.h"
+#include "asm/ldt.h"
 
 struct mmu_context_skas {
 	struct mm_id id;
@@ -15,6 +16,7 @@ struct mmu_context_skas {
 #ifdef CONFIG_3_LEVEL_PGTABLES
         unsigned long last_pmd;
 #endif
+	uml_ldt_t ldt;
 };
 
 extern void switch_mm_skas(struct mm_id * mm_idp);
diff --git a/arch/um/kernel/skas/include/skas.h b/arch/um/kernel/skas/include/skas.h
index 060934740f9f..daa2f85b684c 100644
--- a/arch/um/kernel/skas/include/skas.h
+++ b/arch/um/kernel/skas/include/skas.h
@@ -10,7 +10,8 @@
 #include "sysdep/ptrace.h"
 
 extern int userspace_pid[];
-extern int proc_mm, ptrace_faultinfo;
+extern int proc_mm, ptrace_faultinfo, ptrace_ldt;
+extern int skas_needs_stub;
 
 extern void switch_threads(void *me, void *next);
 extern void thread_wait(void *sw, void *fb);
diff --git a/arch/um/kernel/skas/include/uaccess-skas.h b/arch/um/kernel/skas/include/uaccess-skas.h
index 7da0c2def0ef..f611f83ad4ff 100644
--- a/arch/um/kernel/skas/include/uaccess-skas.h
+++ b/arch/um/kernel/skas/include/uaccess-skas.h
@@ -9,14 +9,8 @@
 #include "asm/errno.h"
 #include "asm/fixmap.h"
 
-#define access_ok_skas(type, addr, size) \
-	((segment_eq(get_fs(), KERNEL_DS)) || \
-	 (((unsigned long) (addr) < TASK_SIZE) && \
-	  ((unsigned long) (addr) + (size) <= TASK_SIZE)) || \
-	 ((type == VERIFY_READ ) && \
-	  ((unsigned long) (addr) >= FIXADDR_USER_START) && \
-	  ((unsigned long) (addr) + (size) <= FIXADDR_USER_END) && \
-	  ((unsigned long) (addr) + (size) >= (unsigned long)(addr))))
+/* No SKAS-specific checking. */
+#define access_ok_skas(type, addr, size) 0
 
 extern int copy_from_user_skas(void *to, const void __user *from, int n);
 extern int copy_to_user_skas(void __user *to, const void *from, int n);
diff --git a/arch/um/kernel/skas/mem.c b/arch/um/kernel/skas/mem.c
index 147466d7ff4f..88ab96c609ce 100644
--- a/arch/um/kernel/skas/mem.c
+++ b/arch/um/kernel/skas/mem.c
@@ -20,7 +20,7 @@ unsigned long set_task_sizes_skas(int arg, unsigned long *host_size_out,
 	*task_size_out = CONFIG_HOST_TASK_SIZE;
 #else
 	*host_size_out = top;
-	if (proc_mm && ptrace_faultinfo)
+	if (!skas_needs_stub)
 		*task_size_out = top;
 	else *task_size_out = CONFIG_STUB_START & PGDIR_MASK;
 #endif
diff --git a/arch/um/kernel/skas/mmu.c b/arch/um/kernel/skas/mmu.c
index 240143b616a2..677871f1b37c 100644
--- a/arch/um/kernel/skas/mmu.c
+++ b/arch/um/kernel/skas/mmu.c
@@ -15,6 +15,7 @@
 #include "asm/mmu.h"
 #include "asm/pgalloc.h"
 #include "asm/pgtable.h"
+#include "asm/ldt.h"
 #include "os.h"
 #include "skas.h"
 
@@ -28,7 +29,6 @@ static int init_stub_pte(struct mm_struct *mm, unsigned long proc,
 	pmd_t *pmd;
 	pte_t *pte;
 
-	spin_lock(&mm->page_table_lock);
 	pgd = pgd_offset(mm, proc);
 	pud = pud_alloc(mm, pgd, proc);
 	if (!pud)
@@ -63,7 +63,6 @@ static int init_stub_pte(struct mm_struct *mm, unsigned long proc,
 	*pte = mk_pte(virt_to_page(kernel), __pgprot(_PAGE_PRESENT));
 	*pte = pte_mkexec(*pte);
 	*pte = pte_wrprotect(*pte);
-	spin_unlock(&mm->page_table_lock);
 	return(0);
 
  out_pmd:
@@ -71,19 +70,17 @@ static int init_stub_pte(struct mm_struct *mm, unsigned long proc,
  out_pte:
 	pmd_free(pmd);
  out:
-	spin_unlock(&mm->page_table_lock);
 	return(-ENOMEM);
 }
 
 int init_new_context_skas(struct task_struct *task, struct mm_struct *mm)
 {
-	struct mm_struct *cur_mm = current->mm;
-	struct mm_id *cur_mm_id = &cur_mm->context.skas.id;
-	struct mm_id *mm_id = &mm->context.skas.id;
+ 	struct mmu_context_skas *from_mm = NULL;
+	struct mmu_context_skas *to_mm = &mm->context.skas;
 	unsigned long stack = 0;
-	int from, ret = -ENOMEM;
+	int from_fd, ret = -ENOMEM;
 
-	if(!proc_mm || !ptrace_faultinfo){
+	if(skas_needs_stub){
 		stack = get_zeroed_page(GFP_KERNEL);
 		if(stack == 0)
 			goto out;
@@ -105,33 +102,43 @@ int init_new_context_skas(struct task_struct *task, struct mm_struct *mm)
 
 		mm->nr_ptes--;
 	}
-	mm_id->stack = stack;
+
+	to_mm->id.stack = stack;
+	if(current->mm != NULL && current->mm != &init_mm)
+		from_mm = &current->mm->context.skas;
 
 	if(proc_mm){
-		if((cur_mm != NULL) && (cur_mm != &init_mm))
-			from = cur_mm_id->u.mm_fd;
-		else from = -1;
+		if(from_mm)
+			from_fd = from_mm->id.u.mm_fd;
+		else from_fd = -1;
 
-		ret = new_mm(from, stack);
+		ret = new_mm(from_fd, stack);
 		if(ret < 0){
 			printk("init_new_context_skas - new_mm failed, "
 			       "errno = %d\n", ret);
 			goto out_free;
 		}
-		mm_id->u.mm_fd = ret;
+		to_mm->id.u.mm_fd = ret;
 	}
 	else {
-		if((cur_mm != NULL) && (cur_mm != &init_mm))
-			mm_id->u.pid = copy_context_skas0(stack,
-							  cur_mm_id->u.pid);
-		else mm_id->u.pid = start_userspace(stack);
+		if(from_mm)
+			to_mm->id.u.pid = copy_context_skas0(stack,
+							     from_mm->id.u.pid);
+		else to_mm->id.u.pid = start_userspace(stack);
+	}
+
+	ret = init_new_ldt(to_mm, from_mm);
+	if(ret < 0){
+		printk("init_new_context_skas - init_ldt"
+		       " failed, errno = %d\n", ret);
+		goto out_free;
 	}
 
 	return 0;
 
  out_free:
-	if(mm_id->stack != 0)
-		free_page(mm_id->stack);
+	if(to_mm->id.stack != 0)
+		free_page(to_mm->id.stack);
  out:
 	return ret;
 }
@@ -147,6 +154,7 @@ void destroy_context_skas(struct mm_struct *mm)
 
 	if(!proc_mm || !ptrace_faultinfo){
 		free_page(mmu->id.stack);
+		pte_lock_deinit(virt_to_page(mmu->last_page_table));
 		pte_free_kernel((pte_t *) mmu->last_page_table);
                 dec_page_state(nr_page_table_pages);
 #ifdef CONFIG_3_LEVEL_PGTABLES
diff --git a/arch/um/kernel/skas/process.c b/arch/um/kernel/skas/process.c
index 5cd0e9929789..599d679bd4fc 100644
--- a/arch/um/kernel/skas/process.c
+++ b/arch/um/kernel/skas/process.c
@@ -69,6 +69,17 @@ void wait_stub_done(int pid, int sig, char * fname)
 
         if((n < 0) || !WIFSTOPPED(status) ||
            (WSTOPSIG(status) != SIGUSR1 && WSTOPSIG(status) != SIGTRAP)){
+		unsigned long regs[FRAME_SIZE];
+		if(ptrace(PTRACE_GETREGS, pid, 0, regs) < 0)
+			printk("Failed to get registers from stub, "
+			       "errno = %d\n", errno);
+		else {
+			int i;
+
+			printk("Stub registers -\n");
+			for(i = 0; i < FRAME_SIZE; i++)
+				printk("\t%d - %lx\n", i, regs[i]);
+		}
                 panic("%s : failed to wait for SIGUSR1/SIGTRAP, "
                       "pid = %d, n = %d, errno = %d, status = 0x%x\n",
                       fname, pid, n, errno, status);
@@ -370,9 +381,9 @@ int copy_context_skas0(unsigned long new_stack, int pid)
 }
 
 /*
- * This is used only, if proc_mm is available, while PTRACE_FAULTINFO
- * isn't. Opening /proc/mm creates a new mm_context, which lacks the stub-pages
- * Thus, we map them using /proc/mm-fd
+ * This is used only, if stub pages are needed, while proc_mm is
+ * availabl. Opening /proc/mm creates a new mm_context, which lacks
+ * the stub-pages. Thus, we map them using /proc/mm-fd
  */
 void map_stub_pages(int fd, unsigned long code,
 		    unsigned long data, unsigned long stack)
diff --git a/arch/um/kernel/skas/process_kern.c b/arch/um/kernel/skas/process_kern.c
index efe92e8aa2a9..9c990253966c 100644
--- a/arch/um/kernel/skas/process_kern.c
+++ b/arch/um/kernel/skas/process_kern.c
@@ -145,7 +145,7 @@ int new_mm(int from, unsigned long stack)
 			       "err = %d\n", -n);
 	}
 
-	if(!ptrace_faultinfo)
+	if(skas_needs_stub)
 		map_stub_pages(fd, CONFIG_STUB_CODE, CONFIG_STUB_DATA, stack);
 
 	return(fd);
diff --git a/arch/um/kernel/skas/uaccess.c b/arch/um/kernel/skas/uaccess.c
index 75195281081e..a5a47528dec7 100644
--- a/arch/um/kernel/skas/uaccess.c
+++ b/arch/um/kernel/skas/uaccess.c
@@ -143,7 +143,7 @@ int copy_from_user_skas(void *to, const void __user *from, int n)
 		return(0);
 	}
 
-	return(access_ok_skas(VERIFY_READ, from, n) ?
+	return(access_ok(VERIFY_READ, from, n) ?
 	       buffer_op((unsigned long) from, n, 0, copy_chunk_from_user, &to):
 	       n);
 }
@@ -164,7 +164,7 @@ int copy_to_user_skas(void __user *to, const void *from, int n)
 		return(0);
 	}
 
-	return(access_ok_skas(VERIFY_WRITE, to, n) ?
+	return(access_ok(VERIFY_WRITE, to, n) ?
 	       buffer_op((unsigned long) to, n, 1, copy_chunk_to_user, &from) :
 	       n);
 }
@@ -193,7 +193,7 @@ int strncpy_from_user_skas(char *dst, const char __user *src, int count)
 		return(strnlen(dst, count));
 	}
 
-	if(!access_ok_skas(VERIFY_READ, src, 1))
+	if(!access_ok(VERIFY_READ, src, 1))
 		return(-EFAULT);
 
 	n = buffer_op((unsigned long) src, count, 0, strncpy_chunk_from_user,
@@ -221,7 +221,7 @@ int clear_user_skas(void __user *mem, int len)
 		return(0);
 	}
 
-	return(access_ok_skas(VERIFY_WRITE, mem, len) ?
+	return(access_ok(VERIFY_WRITE, mem, len) ?
 	       buffer_op((unsigned long) mem, len, 1, clear_chunk, NULL) : len);
 }
 
diff --git a/arch/um/kernel/skas/util/Makefile b/arch/um/kernel/skas/util/Makefile
deleted file mode 100644
index f7b7eba83340..000000000000
--- a/arch/um/kernel/skas/util/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-hostprogs-y		:= mk_ptregs
-always			:= $(hostprogs-y)
-
-mk_ptregs-objs := mk_ptregs-$(SUBARCH).o
-HOSTCFLAGS_mk_ptregs-$(SUBARCH).o := -I$(objtree)/arch/um
diff --git a/arch/um/kernel/skas/util/mk_ptregs-i386.c b/arch/um/kernel/skas/util/mk_ptregs-i386.c
deleted file mode 100644
index 1f96e1eeb8a7..000000000000
--- a/arch/um/kernel/skas/util/mk_ptregs-i386.c
+++ /dev/null
@@ -1,49 +0,0 @@
-#include <stdio.h>
-#include <user-offsets.h>
-
-#define SHOW(name) printf("#define %s %d\n", #name, name)
-
-int main(int argc, char **argv)
-{
-	printf("/* Automatically generated by "
-	       "arch/um/kernel/skas/util/mk_ptregs */\n");
-	printf("\n");
-	printf("#ifndef __SKAS_PT_REGS_\n");
-	printf("#define __SKAS_PT_REGS_\n");
-	printf("\n");
-	SHOW(HOST_FRAME_SIZE);
-	SHOW(HOST_FP_SIZE);
-	SHOW(HOST_XFP_SIZE);
-
-	SHOW(HOST_IP);
-	SHOW(HOST_SP);
-	SHOW(HOST_EFLAGS);
-	SHOW(HOST_EAX);
-	SHOW(HOST_EBX);
-	SHOW(HOST_ECX);
-	SHOW(HOST_EDX);
-	SHOW(HOST_ESI);
-	SHOW(HOST_EDI);
-	SHOW(HOST_EBP);
-	SHOW(HOST_CS);
-	SHOW(HOST_SS);
-	SHOW(HOST_DS);
-	SHOW(HOST_FS);
-	SHOW(HOST_ES);
-	SHOW(HOST_GS);
-
-	printf("\n");
-	printf("#endif\n");
-	return(0);
-}
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/kernel/skas/util/mk_ptregs-x86_64.c b/arch/um/kernel/skas/util/mk_ptregs-x86_64.c
deleted file mode 100644
index 5fccbfe35f78..000000000000
--- a/arch/um/kernel/skas/util/mk_ptregs-x86_64.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Copyright 2003 PathScale, Inc.
- *
- * Licensed under the GPL
- */
-
-#include <stdio.h>
-#include <user-offsets.h>
-
-#define SHOW(name) \
-	printf("#define %s (%d / sizeof(unsigned long))\n", #name, name)
-
-int main(int argc, char **argv)
-{
-	printf("/* Automatically generated by "
-	       "arch/um/kernel/skas/util/mk_ptregs */\n");
-	printf("\n");
-	printf("#ifndef __SKAS_PT_REGS_\n");
-	printf("#define __SKAS_PT_REGS_\n");
-	SHOW(HOST_FRAME_SIZE);
-	SHOW(HOST_RBX);
-	SHOW(HOST_RCX);
-	SHOW(HOST_RDI);
-	SHOW(HOST_RSI);
-	SHOW(HOST_RDX);
-	SHOW(HOST_RBP);
-	SHOW(HOST_RAX);
-	SHOW(HOST_R8);
-	SHOW(HOST_R9);
-	SHOW(HOST_R10);
-	SHOW(HOST_R11);
-	SHOW(HOST_R12);
-	SHOW(HOST_R13);
-	SHOW(HOST_R14);
-	SHOW(HOST_R15);
-	SHOW(HOST_ORIG_RAX);
-	SHOW(HOST_CS);
-	SHOW(HOST_SS);
-	SHOW(HOST_EFLAGS);
-#if 0
-	SHOW(HOST_FS);
-	SHOW(HOST_GS);
-	SHOW(HOST_DS);
-	SHOW(HOST_ES);
-#endif
-
-	SHOW(HOST_IP);
-	SHOW(HOST_SP);
-	printf("#define HOST_FP_SIZE 0\n");
-	printf("#define HOST_XFP_SIZE 0\n");
-	printf("\n");
-	printf("\n");
-	printf("#endif\n");
-	return(0);
-}
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/kernel/sysrq.c b/arch/um/kernel/sysrq.c
index f80850091e79..b331e970002f 100644
--- a/arch/um/kernel/sysrq.c
+++ b/arch/um/kernel/sysrq.c
@@ -62,13 +62,7 @@ void show_stack(struct task_struct *task, unsigned long *esp)
 
 	if (esp == NULL) {
 		if (task != current && task != NULL) {
-			/* XXX: Isn't this bogus? I.e. isn't this the
-			 * *userspace* stack of this task? If not so, use this
-			 * even when task == current (as in i386).
-			 */
 			esp = (unsigned long *) KSTK_ESP(task);
-			/* Which one? No actual difference - just coding style.*/
-			//esp = (unsigned long *) PT_REGS_IP(&task->thread.regs);
 		} else {
 			esp = (unsigned long *) &esp;
 		}
@@ -84,5 +78,5 @@ void show_stack(struct task_struct *task, unsigned long *esp)
 	}
 
 	printk("Call Trace: \n");
-	show_trace(current, esp);
+	show_trace(task, esp);
 }
diff --git a/arch/um/kernel/time_kern.c b/arch/um/kernel/time_kern.c
index 4e08f7545d63..020ca79b8d33 100644
--- a/arch/um/kernel/time_kern.c
+++ b/arch/um/kernel/time_kern.c
@@ -22,10 +22,6 @@
 #include "mode.h"
 #include "os.h"
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 int hz(void)
 {
 	return(HZ);
diff --git a/arch/um/kernel/tlb.c b/arch/um/kernel/tlb.c
index 0a562c3c0fd8..f5b0636f9ad7 100644
--- a/arch/um/kernel/tlb.c
+++ b/arch/um/kernel/tlb.c
@@ -193,12 +193,12 @@ void fix_range_common(struct mm_struct *mm, unsigned long start_addr,
                 r = pte_read(*npte);
                 w = pte_write(*npte);
                 x = pte_exec(*npte);
-                if(!pte_dirty(*npte))
-                        w = 0;
-                if(!pte_young(*npte)){
-                        r = 0;
-                        w = 0;
-                }
+		if (!pte_young(*npte)) {
+			r = 0;
+			w = 0;
+		} else if (!pte_dirty(*npte)) {
+			w = 0;
+		}
                 if(force || pte_newpage(*npte)){
                         if(pte_present(*npte))
 			  ret = add_mmap(addr,
diff --git a/arch/um/kernel/trap_kern.c b/arch/um/kernel/trap_kern.c
index 87cc6fd76ced..0d4c10a73607 100644
--- a/arch/um/kernel/trap_kern.c
+++ b/arch/um/kernel/trap_kern.c
@@ -18,6 +18,7 @@
 #include "asm/a.out.h"
 #include "asm/current.h"
 #include "asm/irq.h"
+#include "sysdep/sigcontext.h"
 #include "user_util.h"
 #include "kern_util.h"
 #include "kern.h"
@@ -25,6 +26,9 @@
 #include "mconsole_kern.h"
 #include "mem.h"
 #include "mem_kern.h"
+#ifdef CONFIG_MODE_SKAS
+#include "skas.h"
+#endif
 
 /* Note this is constrained to return 0, -EFAULT, -EACCESS, -ENOMEM by segv(). */
 int handle_page_fault(unsigned long address, unsigned long ip, 
@@ -39,6 +43,12 @@ int handle_page_fault(unsigned long address, unsigned long ip,
 	int err = -EFAULT;
 
 	*code_out = SEGV_MAPERR;
+
+	/* If the fault was during atomic operation, don't take the fault, just
+	 * fail. */
+	if (in_atomic())
+		goto out_nosemaphore;
+
 	down_read(&mm->mmap_sem);
 	vma = find_vma(mm, address);
 	if(!vma) 
@@ -85,10 +95,20 @@ survive:
 		pte = pte_offset_kernel(pmd, address);
 	} while(!pte_present(*pte));
 	err = 0;
+	/* The below warning was added in place of
+	 *	pte_mkyoung(); if (is_write) pte_mkdirty();
+	 * If it's triggered, we'd see normally a hang here (a clean pte is
+	 * marked read-only to emulate the dirty bit).
+	 * However, the generic code can mark a PTE writable but clean on a
+	 * concurrent read fault, triggering this harmlessly. So comment it out.
+	 */
+#if 0
 	WARN_ON(!pte_young(*pte) || (is_write && !pte_dirty(*pte)));
+#endif
 	flush_tlb_page(vma, address);
 out:
 	up_read(&mm->mmap_sem);
+out_nosemaphore:
 	return(err);
 
 /*
@@ -125,7 +145,15 @@ unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user, void *sc)
         }
 	else if(current->mm == NULL)
 		panic("Segfault with no mm");
-	err = handle_page_fault(address, ip, is_write, is_user, &si.si_code);
+
+	if (SEGV_IS_FIXABLE(&fi) || SEGV_MAYBE_FIXABLE(&fi))
+		err = handle_page_fault(address, ip, is_write, is_user, &si.si_code);
+	else {
+		err = -EFAULT;
+		/* A thread accessed NULL, we get a fault, but CR2 is invalid.
+		 * This code is used in __do_copy_from_user() of TT mode. */
+		address = 0;
+	}
 
 	catcher = current->thread.fault_catcher;
 	if(!err)
diff --git a/arch/um/kernel/tt/include/uaccess-tt.h b/arch/um/kernel/tt/include/uaccess-tt.h
index dc2ebfa8c54f..b9bfe9c481c4 100644
--- a/arch/um/kernel/tt/include/uaccess-tt.h
+++ b/arch/um/kernel/tt/include/uaccess-tt.h
@@ -19,19 +19,13 @@
 extern unsigned long end_vm;
 extern unsigned long uml_physmem;
 
-#define under_task_size(addr, size) \
-	(((unsigned long) (addr) < TASK_SIZE) && \
-         (((unsigned long) (addr) + (size)) < TASK_SIZE))
-
 #define is_stack(addr, size) \
 	(((unsigned long) (addr) < STACK_TOP) && \
 	 ((unsigned long) (addr) >= STACK_TOP - ABOVE_KMEM) && \
 	 (((unsigned long) (addr) + (size)) <= STACK_TOP))
 
 #define access_ok_tt(type, addr, size) \
-	((type == VERIFY_READ) || (segment_eq(get_fs(), KERNEL_DS)) || \
-         (((unsigned long) (addr) <= ((unsigned long) (addr) + (size))) && \
-          (under_task_size(addr, size) || is_stack(addr, size))))
+	(is_stack(addr, size))
 
 extern unsigned long get_fault_addr(void);
 
diff --git a/arch/um/kernel/tt/tlb.c b/arch/um/kernel/tt/tlb.c
index f1d85dbb45b9..ae6217c86135 100644
--- a/arch/um/kernel/tt/tlb.c
+++ b/arch/um/kernel/tt/tlb.c
@@ -74,42 +74,6 @@ void flush_tlb_kernel_range_tt(unsigned long start, unsigned long end)
                 atomic_inc(&vmchange_seq);
 }
 
-static void protect_vm_page(unsigned long addr, int w, int must_succeed)
-{
-	int err;
-
-	err = protect_memory(addr, PAGE_SIZE, 1, w, 1, must_succeed);
-	if(err == 0) return;
-	else if((err == -EFAULT) || (err == -ENOMEM)){
-		flush_tlb_kernel_range(addr, addr + PAGE_SIZE);
-		protect_vm_page(addr, w, 1);
-	}
-	else panic("protect_vm_page : protect failed, errno = %d\n", err);
-}
-
-void mprotect_kernel_vm(int w)
-{
-	struct mm_struct *mm;
-	pgd_t *pgd;
-	pud_t *pud;
-	pmd_t *pmd;
-	pte_t *pte;
-	unsigned long addr;
-	
-	mm = &init_mm;
-	for(addr = start_vm; addr < end_vm;){
-		pgd = pgd_offset(mm, addr);
-		pud = pud_offset(pgd, addr);
-		pmd = pmd_offset(pud, addr);
-		if(pmd_present(*pmd)){
-			pte = pte_offset_kernel(pmd, addr);
-			if(pte_present(*pte)) protect_vm_page(addr, w, 0);
-			addr += PAGE_SIZE;
-		}
-		else addr += PMD_SIZE;
-	}
-}
-
 void flush_tlb_kernel_vm_tt(void)
 {
         flush_tlb_kernel_range(start_vm, end_vm);
diff --git a/arch/um/kernel/tt/uaccess.c b/arch/um/kernel/tt/uaccess.c
index a72aa632972f..1cb60726567e 100644
--- a/arch/um/kernel/tt/uaccess.c
+++ b/arch/um/kernel/tt/uaccess.c
@@ -8,7 +8,7 @@
 
 int copy_from_user_tt(void *to, const void __user *from, int n)
 {
-	if(!access_ok_tt(VERIFY_READ, from, n))
+	if(!access_ok(VERIFY_READ, from, n))
 		return(n);
 
 	return(__do_copy_from_user(to, from, n, &current->thread.fault_addr,
@@ -17,7 +17,7 @@ int copy_from_user_tt(void *to, const void __user *from, int n)
 
 int copy_to_user_tt(void __user *to, const void *from, int n)
 {
-	if(!access_ok_tt(VERIFY_WRITE, to, n))
+	if(!access_ok(VERIFY_WRITE, to, n))
 		return(n);
 
 	return(__do_copy_to_user(to, from, n, &current->thread.fault_addr,
@@ -28,7 +28,7 @@ int strncpy_from_user_tt(char *dst, const char __user *src, int count)
 {
 	int n;
 
-	if(!access_ok_tt(VERIFY_READ, src, 1))
+	if(!access_ok(VERIFY_READ, src, 1))
 		return(-EFAULT);
 
 	n = __do_strncpy_from_user(dst, src, count,
@@ -47,7 +47,7 @@ int __clear_user_tt(void __user *mem, int len)
 
 int clear_user_tt(void __user *mem, int len)
 {
-	if(!access_ok_tt(VERIFY_WRITE, mem, len))
+	if(!access_ok(VERIFY_WRITE, mem, len))
 		return(len);
 
 	return(__do_clear_user(mem, len, &current->thread.fault_addr,
diff --git a/arch/um/kernel/tt/uaccess_user.c b/arch/um/kernel/tt/uaccess_user.c
index f01475512ecb..6c92bbccb49c 100644
--- a/arch/um/kernel/tt/uaccess_user.c
+++ b/arch/um/kernel/tt/uaccess_user.c
@@ -10,6 +10,7 @@
 #include "uml_uaccess.h"
 #include "task.h"
 #include "kern_util.h"
+#include "os.h"
 
 int __do_copy_from_user(void *to, const void *from, int n,
 			void **fault_addr, void **fault_catcher)
@@ -22,8 +23,15 @@ int __do_copy_from_user(void *to, const void *from, int n,
 			       __do_copy, &faulted);
 	TASK_REGS(get_current())->tt = save;
 
-	if(!faulted) return(0);
-	else return(n - (fault - (unsigned long) from));
+	if(!faulted)
+		return 0;
+	else if (fault)
+		return n - (fault - (unsigned long) from);
+	else
+		/* In case of a general protection fault, we don't have the
+		 * fault address, so NULL is used instead. Pretend we didn't
+		 * copy anything. */
+		return n;
 }
 
 static void __do_strncpy(void *dst, const void *src, int count)
diff --git a/arch/um/kernel/uaccess.c b/arch/um/kernel/uaccess.c
new file mode 100644
index 000000000000..054e3de0784e
--- /dev/null
+++ b/arch/um/kernel/uaccess.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2001 Chris Emerson (cemerson@chiark.greenend.org.uk)
+ * Copyright (C) 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+/* These are here rather than tt/uaccess.c because skas mode needs them in
+ * order to do SIGBUS recovery when a tmpfs mount runs out of room.
+ */
+
+#include <linux/string.h>
+#include "os.h"
+
+void __do_copy(void *to, const void *from, int n)
+{
+	memcpy(to, from, n);
+}
+
+
+int __do_copy_to_user(void *to, const void *from, int n,
+		      void **fault_addr, void **fault_catcher)
+{
+	unsigned long fault;
+	int faulted;
+
+	fault = __do_user_copy(to, from, n, fault_addr, fault_catcher,
+			       __do_copy, &faulted);
+	if(!faulted) return(0);
+	else return(n - (fault - (unsigned long) to));
+}
diff --git a/arch/um/kernel/uaccess_user.c b/arch/um/kernel/uaccess_user.c
deleted file mode 100644
index d035257ed0af..000000000000
--- a/arch/um/kernel/uaccess_user.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/* 
- * Copyright (C) 2001 Chris Emerson (cemerson@chiark.greenend.org.uk)
- * Copyright (C) 2001, 2002 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#include <setjmp.h>
-#include <string.h>
-
-/* These are here rather than tt/uaccess.c because skas mode needs them in
- * order to do SIGBUS recovery when a tmpfs mount runs out of room.
- */
-
-unsigned long __do_user_copy(void *to, const void *from, int n,
-			     void **fault_addr, void **fault_catcher,
-			     void (*op)(void *to, const void *from,
-					int n), int *faulted_out)
-{
-	unsigned long *faddrp = (unsigned long *) fault_addr, ret;
-
-	sigjmp_buf jbuf;
-	*fault_catcher = &jbuf;
-	if(sigsetjmp(jbuf, 1) == 0){
-		(*op)(to, from, n);
-		ret = 0;
-		*faulted_out = 0;
-	} 
-	else {
-		ret = *faddrp;
-		*faulted_out = 1;
-	}
-	*fault_addr = NULL;
-	*fault_catcher = NULL;
-	return ret;
-}
-
-void __do_copy(void *to, const void *from, int n)
-{
-	memcpy(to, from, n);
-}	
-
-
-int __do_copy_to_user(void *to, const void *from, int n,
-		      void **fault_addr, void **fault_catcher)
-{
-	unsigned long fault;
-	int faulted;
-
-	fault = __do_user_copy(to, from, n, fault_addr, fault_catcher,
-			       __do_copy, &faulted);
-	if(!faulted) return(0);
-	else return(n - (fault - (unsigned long) to));
-}
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c
index f0a275947d34..142a9493912b 100644
--- a/arch/um/kernel/um_arch.c
+++ b/arch/um/kernel/um_arch.c
@@ -137,7 +137,7 @@ static char *argv1_end = NULL;
 
 /* Set in early boot */
 static int have_root __initdata = 0;
-long physmem_size = 32 * 1024 * 1024;
+long long physmem_size = 32 * 1024 * 1024;
 
 void set_cmdline(char *cmd)
 {
@@ -334,6 +334,8 @@ int linux_main(int argc, char **argv)
 		add_arg(DEFAULT_COMMAND_LINE);
 
 	os_early_checks();
+	if (force_tt)
+		clear_can_do_skas();
 	mode_tt = force_tt ? 1 : !can_do_skas();
 #ifndef CONFIG_MODE_TT
 	if (mode_tt) {
@@ -400,7 +402,7 @@ int linux_main(int argc, char **argv)
 #ifndef CONFIG_HIGHMEM
 		highmem = 0;
 		printf("CONFIG_HIGHMEM not enabled - physical memory shrunk "
-		       "to %ld bytes\n", physmem_size);
+		       "to %lu bytes\n", physmem_size);
 #endif
 	}
 
@@ -412,8 +414,8 @@ int linux_main(int argc, char **argv)
 
 	setup_physmem(uml_physmem, uml_reserved, physmem_size, highmem);
 	if(init_maps(physmem_size, iomem_size, highmem)){
-		printf("Failed to allocate mem_map for %ld bytes of physical "
-		       "memory and %ld bytes of highmem\n", physmem_size,
+		printf("Failed to allocate mem_map for %lu bytes of physical "
+		       "memory and %lu bytes of highmem\n", physmem_size,
 		       highmem);
 		exit(1);
 	}
@@ -424,7 +426,7 @@ int linux_main(int argc, char **argv)
 	end_vm = start_vm + virtmem_size;
 
 	if(virtmem_size < physmem_size)
-		printf("Kernel virtual memory size shrunk to %ld bytes\n",
+		printf("Kernel virtual memory size shrunk to %lu bytes\n",
 		       virtmem_size);
 
   	uml_postsetup();
diff --git a/arch/um/kernel/umid.c b/arch/um/kernel/umid.c
index 186c28885016..0b21d59ba0cd 100644
--- a/arch/um/kernel/umid.c
+++ b/arch/um/kernel/umid.c
@@ -31,6 +31,8 @@ static char *uml_dir = UML_DIR;
 /* Changed by set_umid */
 static int umid_is_random = 1;
 static int umid_inited = 0;
+/* Have we created the files? Should we remove them? */
+static int umid_owned = 0;
 
 static int make_umid(int (*printer)(const char *fmt, ...));
 
@@ -82,20 +84,21 @@ int __init umid_file_name(char *name, char *buf, int len)
 
 extern int tracing_pid;
 
-static int __init create_pid_file(void)
+static void __init create_pid_file(void)
 {
 	char file[strlen(uml_dir) + UMID_LEN + sizeof("/pid\0")];
 	char pid[sizeof("nnnnn\0")];
 	int fd, n;
 
-	if(umid_file_name("pid", file, sizeof(file))) return 0;
+	if(umid_file_name("pid", file, sizeof(file)))
+		return;
 
 	fd = os_open_file(file, of_create(of_excl(of_rdwr(OPENFLAGS()))), 
 			  0644);
 	if(fd < 0){
 		printf("Open of machine pid file \"%s\" failed: %s\n",
 		       file, strerror(-fd));
-		return 0;
+		return;
 	}
 
 	sprintf(pid, "%d\n", os_getpid());
@@ -103,7 +106,6 @@ static int __init create_pid_file(void)
 	if(n != strlen(pid))
 		printf("Write of pid file failed - err = %d\n", -n);
 	os_close_file(fd);
-	return 0;
 }
 
 static int actually_do_remove(char *dir)
@@ -147,7 +149,8 @@ static int actually_do_remove(char *dir)
 void remove_umid_dir(void)
 {
 	char dir[strlen(uml_dir) + UMID_LEN + 1];
-	if(!umid_inited) return;
+	if (!umid_owned)
+		return;
 
 	sprintf(dir, "%s%s", uml_dir, umid);
 	actually_do_remove(dir);
@@ -155,11 +158,12 @@ void remove_umid_dir(void)
 
 char *get_umid(int only_if_set)
 {
-	if(only_if_set && umid_is_random) return(NULL);
-	return(umid);
+	if(only_if_set && umid_is_random)
+		return NULL;
+	return umid;
 }
 
-int not_dead_yet(char *dir)
+static int not_dead_yet(char *dir)
 {
 	char file[strlen(uml_dir) + UMID_LEN + sizeof("/pid\0")];
 	char pid[sizeof("nnnnn\0")], *end;
@@ -193,7 +197,8 @@ int not_dead_yet(char *dir)
 		   (p == CHOOSE_MODE(tracing_pid, os_getpid())))
 			dead = 1;
 	}
-	if(!dead) return(1);
+	if(!dead)
+		return(1);
 	return(actually_do_remove(dir));
 }
 
@@ -232,16 +237,13 @@ static int __init make_uml_dir(void)
 		strlcpy(dir, home, sizeof(dir));
 		uml_dir++;
 	}
+	strlcat(dir, uml_dir, sizeof(dir));
 	len = strlen(dir);
-	strncat(dir, uml_dir, sizeof(dir) - len);
-	len = strlen(dir);
-	if((len > 0) && (len < sizeof(dir) - 1) && (dir[len - 1] != '/')){
-		dir[len] = '/';
-		dir[len + 1] = '\0';
-	}
+	if (len > 0 && dir[len - 1] != '/')
+		strlcat(dir, "/", sizeof(dir));
 
 	uml_dir = malloc(strlen(dir) + 1);
-	if(uml_dir == NULL){
+	if (uml_dir == NULL) {
 		printf("make_uml_dir : malloc failed, errno = %d\n", errno);
 		exit(1);
 	}
@@ -286,6 +288,7 @@ static int __init make_umid(int (*printer)(const char *fmt, ...))
 		if(errno == EEXIST){
 			if(not_dead_yet(tmp)){
 				(*printer)("umid '%s' is in use\n", umid);
+				umid_owned = 0;
 				return(-1);
 			}
 			err = mkdir(tmp, 0777);
@@ -296,7 +299,8 @@ static int __init make_umid(int (*printer)(const char *fmt, ...))
 		return(-1);
 	}
 
-	return(0);
+	umid_owned = 1;
+	return 0;
 }
 
 __uml_setup("uml_dir=", set_uml_dir,
@@ -309,7 +313,8 @@ static int __init make_umid_setup(void)
 	/* one function with the ordering we need ... */
 	make_uml_dir();
 	make_umid(printf);
-	return create_pid_file();
+	create_pid_file();
+	return 0;
 }
 __uml_postsetup(make_umid_setup);
 
diff --git a/arch/um/kernel/user_util.c b/arch/um/kernel/user_util.c
index 41d17c71511c..4c231161f257 100644
--- a/arch/um/kernel/user_util.c
+++ b/arch/um/kernel/user_util.c
@@ -27,7 +27,6 @@
 #include "user.h"
 #include "mem_user.h"
 #include "init.h"
-#include "helper.h"
 #include "ptrace_user.h"
 #include "uml-config.h"
 
diff --git a/arch/um/os-Linux/Makefile b/arch/um/os-Linux/Makefile
index d15ec2af6a22..b83ac8e21c35 100644
--- a/arch/um/os-Linux/Makefile
+++ b/arch/um/os-Linux/Makefile
@@ -3,11 +3,12 @@
 # Licensed under the GPL
 #
 
-obj-y = aio.o elf_aux.o file.o mem.o process.o signal.o start_up.o time.o \
-	tt.o tty.o user_syms.o drivers/ sys-$(SUBARCH)/
+obj-y = aio.o elf_aux.o file.o helper.o main.o mem.o process.o signal.o \
+	start_up.o time.o tt.o tty.o uaccess.o user_syms.o drivers/ \
+	sys-$(SUBARCH)/
 
-USER_OBJS := aio.o elf_aux.o file.o mem.o process.o signal.o start_up.o \
-	time.o tt.o tty.o
+USER_OBJS := aio.o elf_aux.o file.o helper.o main.o mem.o process.o signal.o \
+	start_up.o time.o tt.o tty.o uaccess.o
 
 elf_aux.o: $(ARCH_DIR)/kernel-offsets.h
 CFLAGS_elf_aux.o += -I$(objtree)/arch/um
diff --git a/arch/um/os-Linux/aio.c b/arch/um/os-Linux/aio.c
index f6e64026f995..ffa759addd3c 100644
--- a/arch/um/os-Linux/aio.c
+++ b/arch/um/os-Linux/aio.c
@@ -6,42 +6,27 @@
 #include <stdlib.h>
 #include <unistd.h>
 #include <signal.h>
-#include <string.h>
 #include <errno.h>
 #include <sched.h>
 #include <sys/syscall.h>
 #include "os.h"
-#include "helper.h"
 #include "aio.h"
 #include "init.h"
 #include "user.h"
 #include "mode.h"
 
+struct aio_thread_req {
+        enum aio_type type;
+        int io_fd;
+        unsigned long long offset;
+        char *buf;
+        int len;
+        struct aio_context *aio;
+};
+
 static int aio_req_fd_r = -1;
 static int aio_req_fd_w = -1;
 
-static int update_aio(struct aio_context *aio, int res)
-{
-        if(res < 0)
-                aio->len = res;
-        else if((res == 0) && (aio->type == AIO_READ)){
-                /* This is the EOF case - we have hit the end of the file
-                 * and it ends in a partial block, so we fill the end of
-                 * the block with zeros and claim success.
-                 */
-                memset(aio->data, 0, aio->len);
-                aio->len = 0;
-        }
-        else if(res > 0){
-                aio->len -= res;
-                aio->data += res;
-                aio->offset += res;
-                return aio->len;
-        }
-
-        return 0;
-}
-
 #if defined(HAVE_AIO_ABI)
 #include <linux/aio_abi.h>
 
@@ -80,7 +65,8 @@ static long io_getevents(aio_context_t ctx_id, long min_nr, long nr,
  * that it now backs the mmapped area.
  */
 
-static int do_aio(aio_context_t ctx, struct aio_context *aio)
+static int do_aio(aio_context_t ctx, enum aio_type type, int fd, char *buf,
+                  int len, unsigned long long offset, struct aio_context *aio)
 {
         struct iocb iocb, *iocbp = &iocb;
         char c;
@@ -88,39 +74,40 @@ static int do_aio(aio_context_t ctx, struct aio_context *aio)
 
         iocb = ((struct iocb) { .aio_data 	= (unsigned long) aio,
                                 .aio_reqprio	= 0,
-                                .aio_fildes	= aio->fd,
-                                .aio_buf	= (unsigned long) aio->data,
-                                .aio_nbytes	= aio->len,
-                                .aio_offset	= aio->offset,
+                                .aio_fildes	= fd,
+                                .aio_buf	= (unsigned long) buf,
+                                .aio_nbytes	= len,
+                                .aio_offset	= offset,
                                 .aio_reserved1	= 0,
                                 .aio_reserved2	= 0,
                                 .aio_reserved3	= 0 });
 
-        switch(aio->type){
+        switch(type){
         case AIO_READ:
                 iocb.aio_lio_opcode = IOCB_CMD_PREAD;
+                err = io_submit(ctx, 1, &iocbp);
                 break;
         case AIO_WRITE:
                 iocb.aio_lio_opcode = IOCB_CMD_PWRITE;
+                err = io_submit(ctx, 1, &iocbp);
                 break;
         case AIO_MMAP:
                 iocb.aio_lio_opcode = IOCB_CMD_PREAD;
                 iocb.aio_buf = (unsigned long) &c;
                 iocb.aio_nbytes = sizeof(c);
+                err = io_submit(ctx, 1, &iocbp);
                 break;
         default:
-                printk("Bogus op in do_aio - %d\n", aio->type);
+                printk("Bogus op in do_aio - %d\n", type);
                 err = -EINVAL;
-                goto out;
+                break;
         }
 
-        err = io_submit(ctx, 1, &iocbp);
         if(err > 0)
                 err = 0;
 	else
 		err = -errno;
 
- out:
         return err;
 }
 
@@ -129,9 +116,8 @@ static aio_context_t ctx = 0;
 static int aio_thread(void *arg)
 {
         struct aio_thread_reply reply;
-        struct aio_context *aio;
         struct io_event event;
-        int err, n;
+        int err, n, reply_fd;
 
         signal(SIGWINCH, SIG_IGN);
 
@@ -144,22 +130,14 @@ static int aio_thread(void *arg)
                                "errno = %d\n", errno);
                 }
                 else {
-			/* This is safe as we've just a pointer here. */
-			aio = (struct aio_context *) (long) event.data;
-			if(update_aio(aio, event.res)){
-				do_aio(ctx, aio);
-				continue;
-			}
-
                         reply = ((struct aio_thread_reply)
-				{ .data = aio,
-				  .err	= aio->len });
-			err = os_write_file(aio->reply_fd, &reply,
-					    sizeof(reply));
+				 { .data = (void *) (long) event.data,
+				   .err	= event.res });
+			reply_fd = ((struct aio_context *) reply.data)->reply_fd;
+			err = os_write_file(reply_fd, &reply, sizeof(reply));
                         if(err != sizeof(reply))
-				printk("aio_thread - write failed, "
-				       "fd = %d, err = %d\n", aio->reply_fd,
-				       -err);
+				printk("aio_thread - write failed, fd = %d, "
+                                       "err = %d\n", aio_req_fd_r, -err);
                 }
         }
         return 0;
@@ -167,35 +145,35 @@ static int aio_thread(void *arg)
 
 #endif
 
-static int do_not_aio(struct aio_context *aio)
+static int do_not_aio(struct aio_thread_req *req)
 {
         char c;
         int err;
 
-        switch(aio->type){
+        switch(req->type){
         case AIO_READ:
-                err = os_seek_file(aio->fd, aio->offset);
+                err = os_seek_file(req->io_fd, req->offset);
                 if(err)
                         goto out;
 
-                err = os_read_file(aio->fd, aio->data, aio->len);
+                err = os_read_file(req->io_fd, req->buf, req->len);
                 break;
         case AIO_WRITE:
-                err = os_seek_file(aio->fd, aio->offset);
+                err = os_seek_file(req->io_fd, req->offset);
                 if(err)
                         goto out;
 
-                err = os_write_file(aio->fd, aio->data, aio->len);
+                err = os_write_file(req->io_fd, req->buf, req->len);
                 break;
         case AIO_MMAP:
-                err = os_seek_file(aio->fd, aio->offset);
+                err = os_seek_file(req->io_fd, req->offset);
                 if(err)
                         goto out;
 
-                err = os_read_file(aio->fd, &c, sizeof(c));
+                err = os_read_file(req->io_fd, &c, sizeof(c));
                 break;
         default:
-                printk("do_not_aio - bad request type : %d\n", aio->type);
+                printk("do_not_aio - bad request type : %d\n", req->type);
                 err = -EINVAL;
                 break;
         }
@@ -206,14 +184,14 @@ static int do_not_aio(struct aio_context *aio)
 
 static int not_aio_thread(void *arg)
 {
-        struct aio_context *aio;
+        struct aio_thread_req req;
         struct aio_thread_reply reply;
         int err;
 
         signal(SIGWINCH, SIG_IGN);
         while(1){
-                err = os_read_file(aio_req_fd_r, &aio, sizeof(aio));
-                if(err != sizeof(aio)){
+                err = os_read_file(aio_req_fd_r, &req, sizeof(req));
+                if(err != sizeof(req)){
                         if(err < 0)
                                 printk("not_aio_thread - read failed, "
                                        "fd = %d, err = %d\n", aio_req_fd_r,
@@ -224,34 +202,17 @@ static int not_aio_thread(void *arg)
                         }
                         continue;
                 }
- again:
-                err = do_not_aio(aio);
-
-                if(update_aio(aio, err))
-                        goto again;
-
-                reply = ((struct aio_thread_reply) { .data 	= aio,
-                                                     .err	= aio->len });
-                err = os_write_file(aio->reply_fd, &reply, sizeof(reply));
+                err = do_not_aio(&req);
+                reply = ((struct aio_thread_reply) { .data 	= req.aio,
+                                                     .err	= err });
+                err = os_write_file(req.aio->reply_fd, &reply, sizeof(reply));
                 if(err != sizeof(reply))
                         printk("not_aio_thread - write failed, fd = %d, "
                                "err = %d\n", aio_req_fd_r, -err);
         }
 }
 
-static int submit_aio_24(struct aio_context *aio)
-{
-        int err;
-
-        err = os_write_file(aio_req_fd_w, &aio, sizeof(aio));
-        if(err == sizeof(aio))
-                err = 0;
-
-        return err;
-}
-
 static int aio_pid = -1;
-static int (*submit_proc)(struct aio_context *aio);
 
 static int init_aio_24(void)
 {
@@ -283,33 +244,11 @@ static int init_aio_24(void)
 #endif
 	printk("2.6 host AIO support not used - falling back to I/O "
 	       "thread\n");
-
-	submit_proc = submit_aio_24;
-
         return 0;
 }
 
 #ifdef HAVE_AIO_ABI
 #define DEFAULT_24_AIO 0
-static int submit_aio_26(struct aio_context *aio)
-{
-	struct aio_thread_reply reply;
-	int err;
-
-	err = do_aio(ctx, aio);
-	if(err){
-		reply = ((struct aio_thread_reply) { .data = aio,
-					             .err  = err });
-		err = os_write_file(aio->reply_fd, &reply, sizeof(reply));
-		if(err != sizeof(reply))
-			printk("submit_aio_26 - write failed, "
-			       "fd = %d, err = %d\n", aio->reply_fd, -err);
-		else err = 0;
-	}
-
-	return err;
-}
-
 static int init_aio_26(void)
 {
         unsigned long stack;
@@ -330,22 +269,39 @@ static int init_aio_26(void)
         aio_pid = err;
 
 	printk("Using 2.6 host AIO\n");
+        return 0;
+}
+
+static int submit_aio_26(enum aio_type type, int io_fd, char *buf, int len,
+			 unsigned long long offset, struct aio_context *aio)
+{
+        struct aio_thread_reply reply;
+        int err;
 
-	submit_proc = submit_aio_26;
+        err = do_aio(ctx, type, io_fd, buf, len, offset, aio);
+        if(err){
+                reply = ((struct aio_thread_reply) { .data = aio,
+                                                     .err  = err });
+                err = os_write_file(aio->reply_fd, &reply, sizeof(reply));
+                if(err != sizeof(reply))
+                        printk("submit_aio_26 - write failed, "
+                               "fd = %d, err = %d\n", aio->reply_fd, -err);
+                else err = 0;
+        }
 
-        return 0;
+        return err;
 }
 
 #else
 #define DEFAULT_24_AIO 1
-static int submit_aio_26(struct aio_context *aio)
+static int init_aio_26(void)
 {
         return -ENOSYS;
 }
 
-static int init_aio_26(void)
+static int submit_aio_26(enum aio_type type, int io_fd, char *buf, int len,
+			 unsigned long long offset, struct aio_context *aio)
 {
-	submit_proc = submit_aio_26;
         return -ENOSYS;
 }
 #endif
@@ -412,7 +368,33 @@ static void exit_aio(void)
 
 __uml_exitcall(exit_aio);
 
-int submit_aio(struct aio_context *aio)
+static int submit_aio_24(enum aio_type type, int io_fd, char *buf, int len,
+			 unsigned long long offset, struct aio_context *aio)
 {
-	return (*submit_proc)(aio);
+        struct aio_thread_req req = { .type 		= type,
+                                      .io_fd		= io_fd,
+                                      .offset		= offset,
+                                      .buf		= buf,
+                                      .len		= len,
+                                      .aio		= aio,
+        };
+        int err;
+
+        err = os_write_file(aio_req_fd_w, &req, sizeof(req));
+        if(err == sizeof(req))
+                err = 0;
+
+        return err;
+}
+
+int submit_aio(enum aio_type type, int io_fd, char *buf, int len,
+               unsigned long long offset, int reply_fd,
+               struct aio_context *aio)
+{
+        aio->reply_fd = reply_fd;
+        if(aio_24)
+                return submit_aio_24(type, io_fd, buf, len, offset, aio);
+        else {
+                return submit_aio_26(type, io_fd, buf, len, offset, aio);
+        }
 }
diff --git a/arch/um/os-Linux/drivers/ethertap_user.c b/arch/um/os-Linux/drivers/ethertap_user.c
index cd4d6544da71..901b85e8a1c6 100644
--- a/arch/um/os-Linux/drivers/ethertap_user.c
+++ b/arch/um/os-Linux/drivers/ethertap_user.c
@@ -19,7 +19,6 @@
 #include "user_util.h"
 #include "net_user.h"
 #include "etap.h"
-#include "helper.h"
 #include "os.h"
 
 #define MAX_PACKET ETH_MAX_PACKET
diff --git a/arch/um/os-Linux/drivers/tuntap_user.c b/arch/um/os-Linux/drivers/tuntap_user.c
index 4ba9b17adf13..52945338b64d 100644
--- a/arch/um/os-Linux/drivers/tuntap_user.c
+++ b/arch/um/os-Linux/drivers/tuntap_user.c
@@ -20,7 +20,6 @@
 #include "kern_util.h"
 #include "user_util.h"
 #include "user.h"
-#include "helper.h"
 #include "os.h"
 
 #define MAX_PACKET ETH_MAX_PACKET
diff --git a/arch/um/os-Linux/elf_aux.c b/arch/um/os-Linux/elf_aux.c
index ab33cb3c74ec..5a99dd3fbed0 100644
--- a/arch/um/os-Linux/elf_aux.c
+++ b/arch/um/os-Linux/elf_aux.c
@@ -12,7 +12,7 @@
 #include "init.h"
 #include "elf_user.h"
 #include "mem_user.h"
-#include <kernel-offsets.h>
+#include <kern_constants.h>
 
 /* Use the one from the kernel - the host may miss it, if having old headers. */
 #if UM_ELF_CLASS == UM_ELFCLASS32
diff --git a/arch/um/kernel/helper.c b/arch/um/os-Linux/helper.c
index 33fb0bd3b11a..36cc8475bcda 100644
--- a/arch/um/kernel/helper.c
+++ b/arch/um/os-Linux/helper.c
@@ -1,4 +1,4 @@
-/* 
+/*
  * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
  * Licensed under the GPL
  */
@@ -13,7 +13,6 @@
 #include "user.h"
 #include "kern_util.h"
 #include "user_util.h"
-#include "helper.h"
 #include "os.h"
 
 struct helper_data {
@@ -46,7 +45,7 @@ static int helper_child(void *arg)
 	errval = errno;
 	printk("execvp of '%s' failed - errno = %d\n", argv[0], errno);
 	os_write_file(data->fd, &errval, sizeof(errval));
-	os_kill_process(os_getpid(), 0);
+	kill(os_getpid(), SIGKILL);
 	return(0);
 }
 
@@ -90,7 +89,7 @@ int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv,
 		goto out_close;
 	}
 
-	os_close_file(fds[1]);
+	close(fds[1]);
 	fds[1] = -1;
 
 	/*Read the errno value from the child.*/
@@ -98,7 +97,8 @@ int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv,
 	if(n < 0){
 		printk("run_helper : read on pipe failed, ret = %d\n", -n);
 		ret = n;
-		os_kill_process(pid, 1);
+		kill(pid, SIGKILL);
+		CATCH_EINTR(waitpid(pid, NULL, 0));
 	}
 	else if(n != 0){
 		CATCH_EINTR(n = waitpid(pid, NULL, 0));
@@ -109,8 +109,8 @@ int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv,
 
 out_close:
 	if (fds[1] != -1)
-		os_close_file(fds[1]);
-	os_close_file(fds[0]);
+		close(fds[1]);
+	close(fds[0]);
 out_free:
 	if(stack_out == NULL)
 		free_stack(stack, 0);
@@ -118,7 +118,7 @@ out_free:
 	return(ret);
 }
 
-int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags, 
+int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags,
 		      unsigned long *stack_out, int stack_order)
 {
 	unsigned long stack, sp;
@@ -131,7 +131,7 @@ int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags,
 	pid = clone(proc, (void *) sp, flags | SIGCHLD, arg);
 	if(pid < 0){
 		err = -errno;
-		printk("run_helper_thread : clone failed, errno = %d\n", 
+		printk("run_helper_thread : clone failed, errno = %d\n",
 		       errno);
 		return err;
 	}
diff --git a/arch/um/kernel/main.c b/arch/um/os-Linux/main.c
index d31027f0fe39..23da27d22569 100644
--- a/arch/um/kernel/main.c
+++ b/arch/um/os-Linux/main.c
@@ -157,25 +157,25 @@ int main(int argc, char **argv, char **envp)
 	 */
 	change_sig(SIGPROF, 0);
 
-        /* This signal stuff used to be in the reboot case.  However,
-         * sometimes a SIGVTALRM can come in when we're halting (reproducably
-         * when writing out gcov information, presumably because that takes
-         * some time) and cause a segfault.
-         */
-
-        /* stop timers and set SIG*ALRM to be ignored */
-        disable_timer();
-
-        /* disable SIGIO for the fds and set SIGIO to be ignored */
-        err = deactivate_all_fds();
-        if(err)
-                printf("deactivate_all_fds failed, errno = %d\n", -err);
-
-        /* Let any pending signals fire now.  This ensures
-         * that they won't be delivered after the exec, when
-         * they are definitely not expected.
-         */
-        unblock_signals();
+	/* This signal stuff used to be in the reboot case.  However,
+	 * sometimes a SIGVTALRM can come in when we're halting (reproducably
+	 * when writing out gcov information, presumably because that takes
+	 * some time) and cause a segfault.
+	 */
+
+	/* stop timers and set SIG*ALRM to be ignored */
+	disable_timer();
+
+	/* disable SIGIO for the fds and set SIGIO to be ignored */
+	err = deactivate_all_fds();
+	if(err)
+		printf("deactivate_all_fds failed, errno = %d\n", -err);
+
+	/* Let any pending signals fire now.  This ensures
+	 * that they won't be delivered after the exec, when
+	 * they are definitely not expected.
+	 */
+	unblock_signals();
 
 	/* Reboot */
 	if(ret){
@@ -257,14 +257,3 @@ void __wrap_free(void *ptr)
 	}
 	else __real_free(ptr);
 }
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/os-Linux/mem.c b/arch/um/os-Linux/mem.c
index 8e71edaaf80b..9d7d69a523bb 100644
--- a/arch/um/os-Linux/mem.c
+++ b/arch/um/os-Linux/mem.c
@@ -88,7 +88,7 @@ int make_tempfile(const char *template, char **out_tempname, int do_unlink)
  * This proc is used in start_up.c
  * So it isn't 'static'.
  */
-int create_tmp_file(unsigned long len)
+int create_tmp_file(unsigned long long len)
 {
 	int fd, err;
 	char zero;
@@ -121,7 +121,7 @@ int create_tmp_file(unsigned long len)
 	return(fd);
 }
 
-static int create_anon_file(unsigned long len)
+static int create_anon_file(unsigned long long len)
 {
 	void *addr;
 	int fd;
@@ -144,7 +144,7 @@ static int create_anon_file(unsigned long len)
 
 extern int have_devanon;
 
-int create_mem_file(unsigned long len)
+int create_mem_file(unsigned long long len)
 {
 	int err, fd;
 
diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c
index 6af83171ca4e..37517d49c4ae 100644
--- a/arch/um/os-Linux/start_up.c
+++ b/arch/um/os-Linux/start_up.c
@@ -135,7 +135,9 @@ static int stop_ptraced_child(int pid, void *stack, int exitcode,
 }
 
 int ptrace_faultinfo = 1;
+int ptrace_ldt = 1;
 int proc_mm = 1;
+int skas_needs_stub = 0;
 
 static int __init skas0_cmd_param(char *str, int* add)
 {
@@ -143,11 +145,22 @@ static int __init skas0_cmd_param(char *str, int* add)
 	return 0;
 }
 
+/* The two __uml_setup would conflict, without this stupid alias. */
+
+static int __init mode_skas0_cmd_param(char *str, int* add)
+	__attribute__((alias("skas0_cmd_param")));
+
 __uml_setup("skas0", skas0_cmd_param,
 		"skas0\n"
 		"    Disables SKAS3 usage, so that SKAS0 is used, unless \n"
 	        "    you specify mode=tt.\n\n");
 
+__uml_setup("mode=skas0", mode_skas0_cmd_param,
+		"mode=skas0\n"
+		"    Disables SKAS3 usage, so that SKAS0 is used, unless you \n"
+		"    specify mode=tt. Note that this was recently added - on \n"
+		"    older kernels you must use simply \"skas0\".\n\n");
+
 static int force_sysemu_disabled = 0;
 
 static int __init nosysemu_cmd_param(char *str, int* add)
@@ -283,7 +296,7 @@ static void __init check_ptrace(void)
 	check_sysemu();
 }
 
-extern int create_tmp_file(unsigned long len);
+extern int create_tmp_file(unsigned long long len);
 
 static void check_tmpexec(void)
 {
@@ -341,14 +354,26 @@ __uml_setup("noptracefaultinfo", noptracefaultinfo_cmd_param,
 "    it. To support PTRACE_FAULTINFO, the host needs to be patched\n"
 "    using the current skas3 patch.\n\n");
 
+static int __init noptraceldt_cmd_param(char *str, int* add)
+{
+	ptrace_ldt = 0;
+	return 0;
+}
+
+__uml_setup("noptraceldt", noptraceldt_cmd_param,
+"noptraceldt\n"
+"    Turns off usage of PTRACE_LDT, even if host supports it.\n"
+"    To support PTRACE_LDT, the host needs to be patched using\n"
+"    the current skas3 patch.\n\n");
+
 #ifdef UML_CONFIG_MODE_SKAS
-static inline void check_skas3_ptrace_support(void)
+static inline void check_skas3_ptrace_faultinfo(void)
 {
 	struct ptrace_faultinfo fi;
 	void *stack;
 	int pid, n;
 
-	printf("Checking for the skas3 patch in the host...");
+	printf("  - PTRACE_FAULTINFO...");
 	pid = start_ptraced_child(&stack);
 
 	n = ptrace(PTRACE_FAULTINFO, pid, 0, &fi);
@@ -370,9 +395,49 @@ static inline void check_skas3_ptrace_support(void)
 	stop_ptraced_child(pid, stack, 1, 1);
 }
 
-int can_do_skas(void)
+static inline void check_skas3_ptrace_ldt(void)
 {
-	printf("Checking for /proc/mm...");
+#ifdef PTRACE_LDT
+	void *stack;
+	int pid, n;
+	unsigned char ldtbuf[40];
+	struct ptrace_ldt ldt_op = (struct ptrace_ldt) {
+		.func = 2, /* read default ldt */
+		.ptr = ldtbuf,
+		.bytecount = sizeof(ldtbuf)};
+
+	printf("  - PTRACE_LDT...");
+	pid = start_ptraced_child(&stack);
+
+	n = ptrace(PTRACE_LDT, pid, 0, (unsigned long) &ldt_op);
+	if (n < 0) {
+		if(errno == EIO)
+			printf("not found\n");
+		else {
+			perror("not found");
+		}
+		ptrace_ldt = 0;
+	}
+	else {
+		if(ptrace_ldt)
+			printf("found\n");
+		else
+			printf("found, but use is disabled\n");
+	}
+
+	stop_ptraced_child(pid, stack, 1, 1);
+#else
+	/* PTRACE_LDT might be disabled via cmdline option.
+	 * We want to override this, else we might use the stub
+	 * without real need
+	 */
+	ptrace_ldt = 1;
+#endif
+}
+
+static inline void check_skas3_proc_mm(void)
+{
+	printf("  - /proc/mm...");
 	if (os_access("/proc/mm", OS_ACC_W_OK) < 0) {
  		proc_mm = 0;
 		printf("not found\n");
@@ -383,8 +448,19 @@ int can_do_skas(void)
 		else
 			printf("found\n");
 	}
+}
+
+int can_do_skas(void)
+{
+	printf("Checking for the skas3 patch in the host:\n");
+
+	check_skas3_proc_mm();
+	check_skas3_ptrace_faultinfo();
+	check_skas3_ptrace_ldt();
+
+	if(!proc_mm || !ptrace_faultinfo || !ptrace_ldt)
+		skas_needs_stub = 1;
 
-	check_skas3_ptrace_support();
 	return 1;
 }
 #else
diff --git a/arch/um/os-Linux/sys-i386/registers.c b/arch/um/os-Linux/sys-i386/registers.c
index 3125d320722c..aee4812333c6 100644
--- a/arch/um/os-Linux/sys-i386/registers.c
+++ b/arch/um/os-Linux/sys-i386/registers.c
@@ -5,6 +5,7 @@
 
 #include <errno.h>
 #include <string.h>
+#include <setjmp.h>
 #include "sysdep/ptrace_user.h"
 #include "sysdep/ptrace.h"
 #include "uml-config.h"
@@ -126,13 +127,11 @@ void get_safe_registers(unsigned long *regs)
 	memcpy(regs, exec_regs, HOST_FRAME_SIZE * sizeof(unsigned long));
 }
 
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
+void get_thread_regs(union uml_pt_regs *uml_regs, void *buffer)
+{
+	struct __jmp_buf_tag *jmpbuf = buffer;
+
+	UPT_SET(uml_regs, EIP, jmpbuf->__jmpbuf[JB_PC]);
+	UPT_SET(uml_regs, UESP, jmpbuf->__jmpbuf[JB_SP]);
+	UPT_SET(uml_regs, EBP, jmpbuf->__jmpbuf[JB_BP]);
+}
diff --git a/arch/um/os-Linux/sys-x86_64/registers.c b/arch/um/os-Linux/sys-x86_64/registers.c
index 44438d15c3d6..4b638dfb52b0 100644
--- a/arch/um/os-Linux/sys-x86_64/registers.c
+++ b/arch/um/os-Linux/sys-x86_64/registers.c
@@ -5,6 +5,7 @@
 
 #include <errno.h>
 #include <string.h>
+#include <setjmp.h>
 #include "ptrace_user.h"
 #include "uml-config.h"
 #include "skas_ptregs.h"
@@ -74,13 +75,11 @@ void get_safe_registers(unsigned long *regs)
 	memcpy(regs, exec_regs, HOST_FRAME_SIZE * sizeof(unsigned long));
 }
 
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
+void get_thread_regs(union uml_pt_regs *uml_regs, void *buffer)
+{
+	struct __jmp_buf_tag *jmpbuf = buffer;
+
+	UPT_SET(uml_regs, RIP, jmpbuf->__jmpbuf[JB_PC]);
+	UPT_SET(uml_regs, RSP, jmpbuf->__jmpbuf[JB_RSP]);
+	UPT_SET(uml_regs, RBP, jmpbuf->__jmpbuf[JB_RBP]);
+}
diff --git a/arch/um/os-Linux/uaccess.c b/arch/um/os-Linux/uaccess.c
new file mode 100644
index 000000000000..38d710158c3d
--- /dev/null
+++ b/arch/um/os-Linux/uaccess.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2001 Chris Emerson (cemerson@chiark.greenend.org.uk)
+ * Copyright (C) 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#include <setjmp.h>
+#include <string.h>
+
+unsigned long __do_user_copy(void *to, const void *from, int n,
+			     void **fault_addr, void **fault_catcher,
+			     void (*op)(void *to, const void *from,
+					int n), int *faulted_out)
+{
+	unsigned long *faddrp = (unsigned long *) fault_addr, ret;
+
+	sigjmp_buf jbuf;
+	*fault_catcher = &jbuf;
+	if(sigsetjmp(jbuf, 1) == 0){
+		(*op)(to, from, n);
+		ret = 0;
+		*faulted_out = 0;
+	}
+	else {
+		ret = *faddrp;
+		*faulted_out = 1;
+	}
+	*fault_addr = NULL;
+	*fault_catcher = NULL;
+	return ret;
+}
+
diff --git a/arch/um/os-Linux/util/Makefile b/arch/um/os-Linux/util/Makefile
deleted file mode 100644
index 9778aed0c314..000000000000
--- a/arch/um/os-Linux/util/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-hostprogs-y		:= mk_user_constants
-always			:= $(hostprogs-y)
-
-HOSTCFLAGS_mk_user_constants.o := -I$(objtree)/arch/um
diff --git a/arch/um/os-Linux/util/mk_user_constants.c b/arch/um/os-Linux/util/mk_user_constants.c
deleted file mode 100644
index 4838f30eecf0..000000000000
--- a/arch/um/os-Linux/util/mk_user_constants.c
+++ /dev/null
@@ -1,23 +0,0 @@
-#include <stdio.h>
-#include <user-offsets.h>
-
-int main(int argc, char **argv)
-{
-  printf("/*\n");
-  printf(" * Generated by mk_user_constants\n");
-  printf(" */\n");
-  printf("\n");
-  printf("#ifndef __UM_USER_CONSTANTS_H\n");
-  printf("#define __UM_USER_CONSTANTS_H\n");
-  printf("\n");
-  /* I'd like to use FRAME_SIZE from ptrace.h here, but that's wrong on
-   * x86_64 (216 vs 168 bytes).  user_regs_struct is the correct size on
-   * both x86_64 and i386.
-   */
-  printf("#define UM_FRAME_SIZE %d\n", __UM_FRAME_SIZE);
-
-  printf("\n");
-  printf("#endif\n");
-
-  return(0);
-}
diff --git a/arch/um/scripts/Makefile.rules b/arch/um/scripts/Makefile.rules
index 59a1291f477e..b3fbf125709b 100644
--- a/arch/um/scripts/Makefile.rules
+++ b/arch/um/scripts/Makefile.rules
@@ -7,8 +7,8 @@ USER_SINGLE_OBJS := \
 USER_OBJS += $(filter %_user.o,$(obj-y) $(obj-m)  $(USER_SINGLE_OBJS))
 USER_OBJS := $(foreach file,$(USER_OBJS),$(obj)/$(file))
 
-$(USER_OBJS) : c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) \
-	$(CFLAGS_$(notdir $@))
+$(USER_OBJS) $(USER_OBJS:.o=.i) $(USER_OBJS:.o=.s) $(USER_OBJS:.o=.lst): \
+	c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) $(CFLAGS_$(notdir $@))
 $(USER_OBJS): cmd_checksrc =
 $(USER_OBJS): quiet_cmd_checksrc =
 $(USER_OBJS): cmd_force_checksrc =
@@ -26,8 +26,13 @@ define unprofile
 	$(patsubst -pg,,$(patsubst -fprofile-arcs -ftest-coverage,,$(1)))
 endef
 
+# cmd_make_link checks to see if the $(foo-dir) variable starts with a /.  If
+# so, it's considered to be a path relative to $(srcdir) rather than
+# $(srcdir)/arch/$(SUBARCH).  This is because x86_64 wants to get ldt.c from
+# arch/um/sys-i386 rather than arch/i386 like the other borrowed files.  So,
+# it sets $(ldt.c-dir) to /arch/um/sys-i386.
 quiet_cmd_make_link = SYMLINK $@
-cmd_make_link       = ln -sf $(srctree)/arch/$(SUBARCH)/$($(notdir $@)-dir)/$(notdir $@) $@
+cmd_make_link       = rm -f $@; ln -sf $(srctree)$(if $(filter-out /%,$($(notdir $@)-dir)),/arch/$(SUBARCH))/$($(notdir $@)-dir)/$(notdir $@) $@
 
 # this needs to be before the foreach, because targets does not accept
 # complete paths like $(obj)/$(f). To make sure this works, use a := assignment
diff --git a/arch/um/sys-i386/Makefile b/arch/um/sys-i386/Makefile
index 4ca2a229da49..150059dbee12 100644
--- a/arch/um/sys-i386/Makefile
+++ b/arch/um/sys-i386/Makefile
@@ -5,7 +5,7 @@ obj-y = bitops.o bugs.o checksum.o delay.o fault.o ksyms.o ldt.o ptrace.o \
 obj-$(CONFIG_HIGHMEM) += highmem.o
 obj-$(CONFIG_MODULES) += module.o
 
-USER_OBJS := bugs.o ptrace_user.o sigcontext.o fault.o
+USER_OBJS := bugs.o ptrace_user.o sigcontext.o fault.o stub_segv.o
 
 SYMLINKS = bitops.c semaphore.c highmem.c module.c
 
@@ -18,6 +18,4 @@ module.c-dir = kernel
 
 $(obj)/stub_segv.o : _c_flags = $(call unprofile,$(CFLAGS))
 
-subdir- := util
-
 include arch/um/scripts/Makefile.unmap
diff --git a/arch/um/sys-i386/kernel-offsets.c b/arch/um/sys-i386/kernel-offsets.c
index a1070af2bcd8..35db85057506 100644
--- a/arch/um/sys-i386/kernel-offsets.c
+++ b/arch/um/sys-i386/kernel-offsets.c
@@ -18,9 +18,9 @@
 
 void foo(void)
 {
-	OFFSET(TASK_DEBUGREGS, task_struct, thread.arch.debugregs);
+	OFFSET(HOST_TASK_DEBUGREGS, task_struct, thread.arch.debugregs);
 #ifdef CONFIG_MODE_TT
-	OFFSET(TASK_EXTERN_PID, task_struct, thread.mode.tt.extern_pid);
+	OFFSET(HOST_TASK_EXTERN_PID, task_struct, thread.mode.tt.extern_pid);
 #endif
 #include <common-offsets.h>
 }
diff --git a/arch/um/sys-i386/ldt.c b/arch/um/sys-i386/ldt.c
index 36b5c2c13289..17746b4c08ff 100644
--- a/arch/um/sys-i386/ldt.c
+++ b/arch/um/sys-i386/ldt.c
@@ -3,53 +3,26 @@
  * Licensed under the GPL
  */
 
+#include "linux/stddef.h"
 #include "linux/config.h"
 #include "linux/sched.h"
 #include "linux/slab.h"
 #include "linux/types.h"
+#include "linux/errno.h"
 #include "asm/uaccess.h"
-#include "asm/ptrace.h"
 #include "asm/smp.h"
 #include "asm/ldt.h"
+#include "asm/unistd.h"
 #include "choose-mode.h"
 #include "kern.h"
 #include "mode_kern.h"
 
-#ifdef CONFIG_MODE_TT
-
 extern int modify_ldt(int func, void *ptr, unsigned long bytecount);
 
-static int do_modify_ldt_tt(int func, void *ptr, unsigned long bytecount)
-{
-	return modify_ldt(func, ptr, bytecount);
-}
-
-#endif
-
-#ifdef CONFIG_MODE_SKAS
-
-#include "skas.h"
-#include "skas_ptrace.h"
-
-static int do_modify_ldt_skas(int func, void *ptr, unsigned long bytecount)
-{
-	struct ptrace_ldt ldt;
-	u32 cpu;
-	int res;
-
-	ldt = ((struct ptrace_ldt) { .func	= func,
-				     .ptr	= ptr,
-				     .bytecount = bytecount });
-
-	cpu = get_cpu();
-	res = ptrace(PTRACE_LDT, userspace_pid[cpu], 0, (unsigned long) &ldt);
-	put_cpu();
-
-	return res;
-}
-#endif
+#ifdef CONFIG_MODE_TT
 
-int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount)
+static long do_modify_ldt_tt(int func, void __user *ptr,
+			      unsigned long bytecount)
 {
 	struct user_desc info;
 	int res = 0;
@@ -89,8 +62,7 @@ int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount)
 		goto out;
 	}
 
-	res = CHOOSE_MODE_PROC(do_modify_ldt_tt, do_modify_ldt_skas, func,
-				p, bytecount);
+	res = modify_ldt(func, p, bytecount);
 	if(res < 0)
 		goto out;
 
@@ -108,3 +80,470 @@ out:
 	kfree(buf);
 	return res;
 }
+
+#endif
+
+#ifdef CONFIG_MODE_SKAS
+
+#include "skas.h"
+#include "skas_ptrace.h"
+#include "asm/mmu_context.h"
+
+long write_ldt_entry(struct mm_id * mm_idp, int func, struct user_desc * desc,
+		     void **addr, int done)
+{
+	long res;
+
+	if(proc_mm){
+		/* This is a special handling for the case, that the mm to
+		 * modify isn't current->active_mm.
+		 * If this is called directly by modify_ldt,
+		 *     (current->active_mm->context.skas.u == mm_idp)
+		 * will be true. So no call to switch_mm_skas(mm_idp) is done.
+		 * If this is called in case of init_new_ldt or PTRACE_LDT,
+		 * mm_idp won't belong to current->active_mm, but child->mm.
+		 * So we need to switch child's mm into our userspace, then
+		 * later switch back.
+		 *
+		 * Note: I'm unshure: should interrupts be disabled here?
+		 */
+		if(!current->active_mm || current->active_mm == &init_mm ||
+		   mm_idp != &current->active_mm->context.skas.id)
+			switch_mm_skas(mm_idp);
+	}
+
+	if(ptrace_ldt) {
+		struct ptrace_ldt ldt_op = (struct ptrace_ldt) {
+			.func = func,
+			.ptr = desc,
+			.bytecount = sizeof(*desc)};
+		u32 cpu;
+		int pid;
+
+		if(!proc_mm)
+			pid = mm_idp->u.pid;
+		else {
+			cpu = get_cpu();
+			pid = userspace_pid[cpu];
+		}
+
+		res = ptrace(PTRACE_LDT, pid, 0, (unsigned long) &ldt_op);
+		if(res)
+			res = errno;
+
+		if(proc_mm)
+			put_cpu();
+	}
+	else {
+		void *stub_addr;
+		res = syscall_stub_data(mm_idp, (unsigned long *)desc,
+					(sizeof(*desc) + sizeof(long) - 1) &
+					    ~(sizeof(long) - 1),
+					addr, &stub_addr);
+		if(!res){
+			unsigned long args[] = { func,
+						 (unsigned long)stub_addr,
+						 sizeof(*desc),
+						 0, 0, 0 };
+			res = run_syscall_stub(mm_idp, __NR_modify_ldt, args,
+					       0, addr, done);
+		}
+	}
+
+	if(proc_mm){
+		/* This is the second part of special handling, that makes
+		 * PTRACE_LDT possible to implement.
+		 */
+		if(current->active_mm && current->active_mm != &init_mm &&
+		   mm_idp != &current->active_mm->context.skas.id)
+			switch_mm_skas(&current->active_mm->context.skas.id);
+	}
+
+	return res;
+}
+
+static long read_ldt_from_host(void __user * ptr, unsigned long bytecount)
+{
+	int res, n;
+	struct ptrace_ldt ptrace_ldt = (struct ptrace_ldt) {
+			.func = 0,
+			.bytecount = bytecount,
+			.ptr = (void *)kmalloc(bytecount, GFP_KERNEL)};
+	u32 cpu;
+
+	if(ptrace_ldt.ptr == NULL)
+		return -ENOMEM;
+
+	/* This is called from sys_modify_ldt only, so userspace_pid gives
+	 * us the right number
+	 */
+
+	cpu = get_cpu();
+	res = ptrace(PTRACE_LDT, userspace_pid[cpu], 0,
+		     (unsigned long) &ptrace_ldt);
+	put_cpu();
+	if(res < 0)
+		goto out;
+
+	n = copy_to_user(ptr, ptrace_ldt.ptr, res);
+	if(n != 0)
+		res = -EFAULT;
+
+  out:
+	kfree(ptrace_ldt.ptr);
+
+	return res;
+}
+
+/*
+ * In skas mode, we hold our own ldt data in UML.
+ * Thus, the code implementing sys_modify_ldt_skas
+ * is very similar to (and mostly stolen from) sys_modify_ldt
+ * for arch/i386/kernel/ldt.c
+ * The routines copied and modified in part are:
+ * - read_ldt
+ * - read_default_ldt
+ * - write_ldt
+ * - sys_modify_ldt_skas
+ */
+
+static int read_ldt(void __user * ptr, unsigned long bytecount)
+{
+	int i, err = 0;
+	unsigned long size;
+	uml_ldt_t * ldt = &current->mm->context.skas.ldt;
+
+	if(!ldt->entry_count)
+		goto out;
+	if(bytecount > LDT_ENTRY_SIZE*LDT_ENTRIES)
+		bytecount = LDT_ENTRY_SIZE*LDT_ENTRIES;
+	err = bytecount;
+
+	if(ptrace_ldt){
+		return read_ldt_from_host(ptr, bytecount);
+	}
+
+	down(&ldt->semaphore);
+	if(ldt->entry_count <= LDT_DIRECT_ENTRIES){
+		size = LDT_ENTRY_SIZE*LDT_DIRECT_ENTRIES;
+		if(size > bytecount)
+			size = bytecount;
+		if(copy_to_user(ptr, ldt->u.entries, size))
+			err = -EFAULT;
+		bytecount -= size;
+		ptr += size;
+	}
+	else {
+		for(i=0; i<ldt->entry_count/LDT_ENTRIES_PER_PAGE && bytecount;
+			 i++){
+			size = PAGE_SIZE;
+			if(size > bytecount)
+				size = bytecount;
+			if(copy_to_user(ptr, ldt->u.pages[i], size)){
+				err = -EFAULT;
+				break;
+			}
+			bytecount -= size;
+			ptr += size;
+		}
+	}
+	up(&ldt->semaphore);
+
+	if(bytecount == 0 || err == -EFAULT)
+		goto out;
+
+	if(clear_user(ptr, bytecount))
+		err = -EFAULT;
+
+out:
+	return err;
+}
+
+static int read_default_ldt(void __user * ptr, unsigned long bytecount)
+{
+	int err;
+
+	if(bytecount > 5*LDT_ENTRY_SIZE)
+		bytecount = 5*LDT_ENTRY_SIZE;
+
+	err = bytecount;
+	/* UML doesn't support lcall7 and lcall27.
+	 * So, we don't really have a default ldt, but emulate
+	 * an empty ldt of common host default ldt size.
+	 */
+	if(clear_user(ptr, bytecount))
+		err = -EFAULT;
+
+	return err;
+}
+
+static int write_ldt(void __user * ptr, unsigned long bytecount, int func)
+{
+	uml_ldt_t * ldt = &current->mm->context.skas.ldt;
+	struct mm_id * mm_idp = &current->mm->context.skas.id;
+	int i, err;
+	struct user_desc ldt_info;
+	struct ldt_entry entry0, *ldt_p;
+	void *addr = NULL;
+
+	err = -EINVAL;
+	if(bytecount != sizeof(ldt_info))
+		goto out;
+	err = -EFAULT;
+	if(copy_from_user(&ldt_info, ptr, sizeof(ldt_info)))
+		goto out;
+
+	err = -EINVAL;
+	if(ldt_info.entry_number >= LDT_ENTRIES)
+		goto out;
+	if(ldt_info.contents == 3){
+		if (func == 1)
+			goto out;
+		if (ldt_info.seg_not_present == 0)
+			goto out;
+	}
+
+        if(!ptrace_ldt)
+                down(&ldt->semaphore);
+
+	err = write_ldt_entry(mm_idp, func, &ldt_info, &addr, 1);
+	if(err)
+		goto out_unlock;
+        else if(ptrace_ldt) {
+	/* With PTRACE_LDT available, this is used as a flag only */
+                ldt->entry_count = 1;
+                goto out;
+        }
+
+	if(ldt_info.entry_number >= ldt->entry_count &&
+	   ldt_info.entry_number >= LDT_DIRECT_ENTRIES){
+		for(i=ldt->entry_count/LDT_ENTRIES_PER_PAGE;
+		    i*LDT_ENTRIES_PER_PAGE <= ldt_info.entry_number;
+		    i++){
+			if(i == 0)
+				memcpy(&entry0, ldt->u.entries,
+				       sizeof(entry0));
+			ldt->u.pages[i] = (struct ldt_entry *)
+				__get_free_page(GFP_KERNEL|__GFP_ZERO);
+			if(!ldt->u.pages[i]){
+				err = -ENOMEM;
+				/* Undo the change in host */
+				memset(&ldt_info, 0, sizeof(ldt_info));
+				write_ldt_entry(mm_idp, 1, &ldt_info, &addr, 1);
+				goto out_unlock;
+			}
+			if(i == 0) {
+				memcpy(ldt->u.pages[0], &entry0,
+				       sizeof(entry0));
+				memcpy(ldt->u.pages[0]+1, ldt->u.entries+1,
+				       sizeof(entry0)*(LDT_DIRECT_ENTRIES-1));
+			}
+			ldt->entry_count = (i + 1) * LDT_ENTRIES_PER_PAGE;
+		}
+	}
+	if(ldt->entry_count <= ldt_info.entry_number)
+		ldt->entry_count = ldt_info.entry_number + 1;
+
+	if(ldt->entry_count <= LDT_DIRECT_ENTRIES)
+		ldt_p = ldt->u.entries + ldt_info.entry_number;
+	else
+		ldt_p = ldt->u.pages[ldt_info.entry_number/LDT_ENTRIES_PER_PAGE] +
+			ldt_info.entry_number%LDT_ENTRIES_PER_PAGE;
+
+	if(ldt_info.base_addr == 0 && ldt_info.limit == 0 &&
+	   (func == 1 || LDT_empty(&ldt_info))){
+		ldt_p->a = 0;
+		ldt_p->b = 0;
+	}
+	else{
+		if (func == 1)
+			ldt_info.useable = 0;
+		ldt_p->a = LDT_entry_a(&ldt_info);
+		ldt_p->b = LDT_entry_b(&ldt_info);
+	}
+	err = 0;
+
+out_unlock:
+	up(&ldt->semaphore);
+out:
+	return err;
+}
+
+static long do_modify_ldt_skas(int func, void __user *ptr,
+			       unsigned long bytecount)
+{
+	int ret = -ENOSYS;
+
+	switch (func) {
+		case 0:
+			ret = read_ldt(ptr, bytecount);
+			break;
+		case 1:
+		case 0x11:
+			ret = write_ldt(ptr, bytecount, func);
+			break;
+		case 2:
+			ret = read_default_ldt(ptr, bytecount);
+			break;
+	}
+	return ret;
+}
+
+short dummy_list[9] = {0, -1};
+short * host_ldt_entries = NULL;
+
+void ldt_get_host_info(void)
+{
+	long ret;
+	struct ldt_entry * ldt;
+	int i, size, k, order;
+
+	host_ldt_entries = dummy_list+1;
+
+	for(i = LDT_PAGES_MAX-1, order=0; i; i>>=1, order++);
+
+	ldt = (struct ldt_entry *)
+	      __get_free_pages(GFP_KERNEL|__GFP_ZERO, order);
+	if(ldt == NULL) {
+		printk("ldt_get_host_info: couldn't allocate buffer for host ldt\n");
+		return;
+	}
+
+	ret = modify_ldt(0, ldt, (1<<order)*PAGE_SIZE);
+	if(ret < 0) {
+		printk("ldt_get_host_info: couldn't read host ldt\n");
+		goto out_free;
+	}
+	if(ret == 0) {
+		/* default_ldt is active, simply write an empty entry 0 */
+		host_ldt_entries = dummy_list;
+		goto out_free;
+	}
+
+	for(i=0, size=0; i<ret/LDT_ENTRY_SIZE; i++){
+		if(ldt[i].a != 0 || ldt[i].b != 0)
+			size++;
+	}
+
+	if(size < sizeof(dummy_list)/sizeof(dummy_list[0])) {
+		host_ldt_entries = dummy_list;
+	}
+	else {
+		size = (size + 1) * sizeof(dummy_list[0]);
+		host_ldt_entries = (short *)kmalloc(size, GFP_KERNEL);
+		if(host_ldt_entries == NULL) {
+			printk("ldt_get_host_info: couldn't allocate host ldt list\n");
+			goto out_free;
+		}
+	}
+
+	for(i=0, k=0; i<ret/LDT_ENTRY_SIZE; i++){
+		if(ldt[i].a != 0 || ldt[i].b != 0) {
+			host_ldt_entries[k++] = i;
+		}
+	}
+	host_ldt_entries[k] = -1;
+
+out_free:
+	free_pages((unsigned long)ldt, order);
+}
+
+long init_new_ldt(struct mmu_context_skas * new_mm,
+		  struct mmu_context_skas * from_mm)
+{
+	struct user_desc desc;
+	short * num_p;
+	int i;
+	long page, err=0;
+	void *addr = NULL;
+
+	memset(&desc, 0, sizeof(desc));
+
+	if(!ptrace_ldt)
+		init_MUTEX(&new_mm->ldt.semaphore);
+
+	if(!from_mm){
+		/*
+		 * We have to initialize a clean ldt.
+		 */
+		if(proc_mm) {
+			/*
+			 * If the new mm was created using proc_mm, host's
+			 * default-ldt currently is assigned, which normally
+			 * contains the call-gates for lcall7 and lcall27.
+			 * To remove these gates, we simply write an empty
+			 * entry as number 0 to the host.
+			 */
+			err = write_ldt_entry(&new_mm->id, 1, &desc,
+					      &addr, 1);
+		}
+		else{
+			/*
+			 * Now we try to retrieve info about the ldt, we
+			 * inherited from the host. All ldt-entries found
+			 * will be reset in the following loop
+			 */
+			if(host_ldt_entries == NULL)
+				ldt_get_host_info();
+			for(num_p=host_ldt_entries; *num_p != -1; num_p++){
+				desc.entry_number = *num_p;
+				err = write_ldt_entry(&new_mm->id, 1, &desc,
+						      &addr, *(num_p + 1) == -1);
+				if(err)
+					break;
+			}
+		}
+		new_mm->ldt.entry_count = 0;
+	}
+	else if (!ptrace_ldt) {
+		/* Our local LDT is used to supply the data for
+		 * modify_ldt(READLDT), if PTRACE_LDT isn't available,
+		 * i.e., we have to use the stub for modify_ldt, which
+		 * can't handle the big read buffer of up to 64kB.
+		 */
+		down(&from_mm->ldt.semaphore);
+		if(from_mm->ldt.entry_count <= LDT_DIRECT_ENTRIES){
+			memcpy(new_mm->ldt.u.entries, from_mm->ldt.u.entries,
+			       sizeof(new_mm->ldt.u.entries));
+		}
+		else{
+			i = from_mm->ldt.entry_count / LDT_ENTRIES_PER_PAGE;
+			while(i-->0){
+				page = __get_free_page(GFP_KERNEL|__GFP_ZERO);
+				if (!page){
+					err = -ENOMEM;
+					break;
+				}
+				new_mm->ldt.u.pages[i] =
+					(struct ldt_entry *) page;
+				memcpy(new_mm->ldt.u.pages[i],
+				       from_mm->ldt.u.pages[i], PAGE_SIZE);
+			}
+		}
+		new_mm->ldt.entry_count = from_mm->ldt.entry_count;
+		up(&from_mm->ldt.semaphore);
+	}
+
+	return err;
+}
+
+
+void free_ldt(struct mmu_context_skas * mm)
+{
+	int i;
+
+	if(!ptrace_ldt && mm->ldt.entry_count > LDT_DIRECT_ENTRIES){
+		i = mm->ldt.entry_count / LDT_ENTRIES_PER_PAGE;
+		while(i-- > 0){
+			free_page((long )mm->ldt.u.pages[i]);
+		}
+	}
+	mm->ldt.entry_count = 0;
+}
+#endif
+
+int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount)
+{
+	return(CHOOSE_MODE_PROC(do_modify_ldt_tt, do_modify_ldt_skas, func,
+	                        ptr, bytecount));
+}
diff --git a/arch/um/sys-i386/stub_segv.c b/arch/um/sys-i386/stub_segv.c
index 1e88b275edac..a37f672ec964 100644
--- a/arch/um/sys-i386/stub_segv.c
+++ b/arch/um/sys-i386/stub_segv.c
@@ -3,9 +3,11 @@
  * Licensed under the GPL
  */
 
-#include <asm/signal.h>
+#include <signal.h>
+#include <sys/select.h> /* The only way I can see to get sigset_t */
 #include <asm/unistd.h>
 #include "uml-config.h"
+#include "sysdep/stub.h"
 #include "sysdep/sigcontext.h"
 #include "sysdep/faultinfo.h"
 
@@ -13,13 +15,14 @@ void __attribute__ ((__section__ (".__syscall_stub")))
 stub_segv_handler(int sig)
 {
 	struct sigcontext *sc = (struct sigcontext *) (&sig + 1);
+	int pid;
 
 	GET_FAULTINFO_FROM_SC(*((struct faultinfo *) UML_CONFIG_STUB_DATA),
 			      sc);
 
-	__asm__("movl %0, %%eax ; int $0x80": : "g" (__NR_getpid));
-	__asm__("movl %%eax, %%ebx ; movl %0, %%eax ; movl %1, %%ecx ;"
-		"int $0x80": : "g" (__NR_kill), "g" (SIGUSR1));
+	pid = stub_syscall0(__NR_getpid);
+	stub_syscall2(__NR_kill, pid, SIGUSR1);
+
 	/* Load pointer to sigcontext into esp, since we need to leave
 	 * the stack in its original form when we do the sigreturn here, by
 	 * hand.
diff --git a/arch/um/sys-i386/sysrq.c b/arch/um/sys-i386/sysrq.c
index e3706d15c4f5..d5244f070539 100644
--- a/arch/um/sys-i386/sysrq.c
+++ b/arch/um/sys-i386/sysrq.c
@@ -88,9 +88,7 @@ void show_trace(struct task_struct* task, unsigned long * stack)
 		task = current;
 
 	if (task != current) {
-		//ebp = (unsigned long) KSTK_EBP(task);
-		/* Which one? No actual difference - just coding style.*/
-		ebp = (unsigned long) PT_REGS_EBP(&task->thread.regs);
+		ebp = (unsigned long) KSTK_EBP(task);
 	} else {
 		asm ("movl %%ebp, %0" : "=r" (ebp) : );
 	}
@@ -99,15 +97,6 @@ void show_trace(struct task_struct* task, unsigned long * stack)
 		((unsigned long)stack & (~(THREAD_SIZE - 1)));
 	print_context_stack(context, stack, ebp);
 
-	/*while (((long) stack & (THREAD_SIZE-1)) != 0) {
-		addr = *stack;
-		if (__kernel_text_address(addr)) {
-			printk("%08lx:	[<%08lx>]", (unsigned long) stack, addr);
-			print_symbol(" %s", addr);
-			printk("\n");
-		}
-		stack++;
-	}*/
 	printk("\n");
 }
 
diff --git a/arch/um/sys-i386/user-offsets.c b/arch/um/sys-i386/user-offsets.c
index 3ceaabceb3d7..26b68675053d 100644
--- a/arch/um/sys-i386/user-offsets.c
+++ b/arch/um/sys-i386/user-offsets.c
@@ -7,47 +7,48 @@
 #define DEFINE(sym, val) \
         asm volatile("\n->" #sym " %0 " #val : : "i" (val))
 
+#define DEFINE_LONGS(sym, val) \
+        asm volatile("\n->" #sym " %0 " #val : : "i" (val/sizeof(unsigned long)))
+
 #define OFFSET(sym, str, mem) \
 	DEFINE(sym, offsetof(struct str, mem));
 
 void foo(void)
 {
-	OFFSET(SC_IP, sigcontext, eip);
-	OFFSET(SC_SP, sigcontext, esp);
-	OFFSET(SC_FS, sigcontext, fs);
-	OFFSET(SC_GS, sigcontext, gs);
-	OFFSET(SC_DS, sigcontext, ds);
-	OFFSET(SC_ES, sigcontext, es);
-	OFFSET(SC_SS, sigcontext, ss);
-	OFFSET(SC_CS, sigcontext, cs);
-	OFFSET(SC_EFLAGS, sigcontext, eflags);
-	OFFSET(SC_EAX, sigcontext, eax);
-	OFFSET(SC_EBX, sigcontext, ebx);
-	OFFSET(SC_ECX, sigcontext, ecx);
-	OFFSET(SC_EDX, sigcontext, edx);
-	OFFSET(SC_EDI, sigcontext, edi);
-	OFFSET(SC_ESI, sigcontext, esi);
-	OFFSET(SC_EBP, sigcontext, ebp);
-	OFFSET(SC_TRAPNO, sigcontext, trapno);
-	OFFSET(SC_ERR, sigcontext, err);
-	OFFSET(SC_CR2, sigcontext, cr2);
-	OFFSET(SC_FPSTATE, sigcontext, fpstate);
-	OFFSET(SC_SIGMASK, sigcontext, oldmask);
-	OFFSET(SC_FP_CW, _fpstate, cw);
-	OFFSET(SC_FP_SW, _fpstate, sw);
-	OFFSET(SC_FP_TAG, _fpstate, tag);
-	OFFSET(SC_FP_IPOFF, _fpstate, ipoff);
-	OFFSET(SC_FP_CSSEL, _fpstate, cssel);
-	OFFSET(SC_FP_DATAOFF, _fpstate, dataoff);
-	OFFSET(SC_FP_DATASEL, _fpstate, datasel);
-	OFFSET(SC_FP_ST, _fpstate, _st);
-	OFFSET(SC_FXSR_ENV, _fpstate, _fxsr_env);
+	OFFSET(HOST_SC_IP, sigcontext, eip);
+	OFFSET(HOST_SC_SP, sigcontext, esp);
+	OFFSET(HOST_SC_FS, sigcontext, fs);
+	OFFSET(HOST_SC_GS, sigcontext, gs);
+	OFFSET(HOST_SC_DS, sigcontext, ds);
+	OFFSET(HOST_SC_ES, sigcontext, es);
+	OFFSET(HOST_SC_SS, sigcontext, ss);
+	OFFSET(HOST_SC_CS, sigcontext, cs);
+	OFFSET(HOST_SC_EFLAGS, sigcontext, eflags);
+	OFFSET(HOST_SC_EAX, sigcontext, eax);
+	OFFSET(HOST_SC_EBX, sigcontext, ebx);
+	OFFSET(HOST_SC_ECX, sigcontext, ecx);
+	OFFSET(HOST_SC_EDX, sigcontext, edx);
+	OFFSET(HOST_SC_EDI, sigcontext, edi);
+	OFFSET(HOST_SC_ESI, sigcontext, esi);
+	OFFSET(HOST_SC_EBP, sigcontext, ebp);
+	OFFSET(HOST_SC_TRAPNO, sigcontext, trapno);
+	OFFSET(HOST_SC_ERR, sigcontext, err);
+	OFFSET(HOST_SC_CR2, sigcontext, cr2);
+	OFFSET(HOST_SC_FPSTATE, sigcontext, fpstate);
+	OFFSET(HOST_SC_SIGMASK, sigcontext, oldmask);
+	OFFSET(HOST_SC_FP_CW, _fpstate, cw);
+	OFFSET(HOST_SC_FP_SW, _fpstate, sw);
+	OFFSET(HOST_SC_FP_TAG, _fpstate, tag);
+	OFFSET(HOST_SC_FP_IPOFF, _fpstate, ipoff);
+	OFFSET(HOST_SC_FP_CSSEL, _fpstate, cssel);
+	OFFSET(HOST_SC_FP_DATAOFF, _fpstate, dataoff);
+	OFFSET(HOST_SC_FP_DATASEL, _fpstate, datasel);
+	OFFSET(HOST_SC_FP_ST, _fpstate, _st);
+	OFFSET(HOST_SC_FXSR_ENV, _fpstate, _fxsr_env);
 
 	DEFINE(HOST_FRAME_SIZE, FRAME_SIZE);
-	DEFINE(HOST_FP_SIZE,
-		sizeof(struct user_i387_struct) / sizeof(unsigned long));
-	DEFINE(HOST_XFP_SIZE,
-	       sizeof(struct user_fxsr_struct) / sizeof(unsigned long));
+	DEFINE_LONGS(HOST_FP_SIZE, sizeof(struct user_i387_struct));
+	DEFINE_LONGS(HOST_XFP_SIZE, sizeof(struct user_fxsr_struct));
 
 	DEFINE(HOST_IP, EIP);
 	DEFINE(HOST_SP, UESP);
@@ -65,5 +66,5 @@ void foo(void)
 	DEFINE(HOST_FS, FS);
 	DEFINE(HOST_ES, ES);
 	DEFINE(HOST_GS, GS);
-	DEFINE(__UM_FRAME_SIZE, sizeof(struct user_regs_struct));
+	DEFINE(UM_FRAME_SIZE, sizeof(struct user_regs_struct));
 }
diff --git a/arch/um/sys-i386/util/Makefile b/arch/um/sys-i386/util/Makefile
deleted file mode 100644
index bf61afd0b045..000000000000
--- a/arch/um/sys-i386/util/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-hostprogs-y	:= mk_sc mk_thread
-always		:= $(hostprogs-y)
-
-HOSTCFLAGS_mk_sc.o := -I$(objtree)/arch/um
-HOSTCFLAGS_mk_thread.o := -I$(objtree)/arch/um
diff --git a/arch/um/sys-i386/util/mk_sc.c b/arch/um/sys-i386/util/mk_sc.c
deleted file mode 100644
index 04c0d73433aa..000000000000
--- a/arch/um/sys-i386/util/mk_sc.c
+++ /dev/null
@@ -1,51 +0,0 @@
-#include <stdio.h>
-#include <user-offsets.h>
-
-#define SC_OFFSET(name, field) \
-  printf("#define " #name "(sc) *((unsigned long *) &(((char *) (sc))[%d]))\n",\
-	 name)
-
-#define SC_FP_OFFSET(name, field) \
-  printf("#define " #name \
-	 "(sc) *((unsigned long *) &(((char *) (SC_FPSTATE(sc)))[%d]))\n",\
-	 name)
-
-#define SC_FP_OFFSET_PTR(name, field, type) \
-  printf("#define " #name \
-	 "(sc) ((" type " *) &(((char *) (SC_FPSTATE(sc)))[%d]))\n",\
-	 name)
-
-int main(int argc, char **argv)
-{
-  SC_OFFSET(SC_IP, eip);
-  SC_OFFSET(SC_SP, esp);
-  SC_OFFSET(SC_FS, fs);
-  SC_OFFSET(SC_GS, gs);
-  SC_OFFSET(SC_DS, ds);
-  SC_OFFSET(SC_ES, es);
-  SC_OFFSET(SC_SS, ss);
-  SC_OFFSET(SC_CS, cs);
-  SC_OFFSET(SC_EFLAGS, eflags);
-  SC_OFFSET(SC_EAX, eax);
-  SC_OFFSET(SC_EBX, ebx);
-  SC_OFFSET(SC_ECX, ecx);
-  SC_OFFSET(SC_EDX, edx);
-  SC_OFFSET(SC_EDI, edi);
-  SC_OFFSET(SC_ESI, esi);
-  SC_OFFSET(SC_EBP, ebp);
-  SC_OFFSET(SC_TRAPNO, trapno);
-  SC_OFFSET(SC_ERR, err);
-  SC_OFFSET(SC_CR2, cr2);
-  SC_OFFSET(SC_FPSTATE, fpstate);
-  SC_OFFSET(SC_SIGMASK, oldmask);
-  SC_FP_OFFSET(SC_FP_CW, cw);
-  SC_FP_OFFSET(SC_FP_SW, sw);
-  SC_FP_OFFSET(SC_FP_TAG, tag);
-  SC_FP_OFFSET(SC_FP_IPOFF, ipoff);
-  SC_FP_OFFSET(SC_FP_CSSEL, cssel);
-  SC_FP_OFFSET(SC_FP_DATAOFF, dataoff);
-  SC_FP_OFFSET(SC_FP_DATASEL, datasel);
-  SC_FP_OFFSET_PTR(SC_FP_ST, _st, "struct _fpstate");
-  SC_FP_OFFSET_PTR(SC_FXSR_ENV, _fxsr_env, "void");
-  return(0);
-}
diff --git a/arch/um/sys-i386/util/mk_thread.c b/arch/um/sys-i386/util/mk_thread.c
deleted file mode 100644
index 7470d0dda67e..000000000000
--- a/arch/um/sys-i386/util/mk_thread.c
+++ /dev/null
@@ -1,22 +0,0 @@
-#include <stdio.h>
-#include <kernel-offsets.h>
-
-int main(int argc, char **argv)
-{
-  printf("/*\n");
-  printf(" * Generated by mk_thread\n");
-  printf(" */\n");
-  printf("\n");
-  printf("#ifndef __UM_THREAD_H\n");
-  printf("#define __UM_THREAD_H\n");
-  printf("\n");
-  printf("#define TASK_DEBUGREGS(task) ((unsigned long *) "
-	 "&(((char *) (task))[%d]))\n", TASK_DEBUGREGS);
-#ifdef TASK_EXTERN_PID
-  printf("#define TASK_EXTERN_PID(task) *((int *) &(((char *) (task))[%d]))\n",
-	 TASK_EXTERN_PID);
-#endif
-  printf("\n");
-  printf("#endif\n");
-  return(0);
-}
diff --git a/arch/um/sys-x86_64/Makefile b/arch/um/sys-x86_64/Makefile
index f0ab574d1e95..00b2025427df 100644
--- a/arch/um/sys-x86_64/Makefile
+++ b/arch/um/sys-x86_64/Makefile
@@ -5,16 +5,16 @@
 #
 
 #XXX: why into lib-y?
-lib-y = bitops.o bugs.o csum-partial.o delay.o fault.o mem.o memcpy.o \
+lib-y = bitops.o bugs.o csum-partial.o delay.o fault.o ldt.o mem.o memcpy.o \
 	ptrace.o ptrace_user.o sigcontext.o signal.o stub.o \
 	stub_segv.o syscalls.o syscall_table.o sysrq.o thunk.o
 
 obj-y := ksyms.o
 obj-$(CONFIG_MODULES) += module.o um_module.o
 
-USER_OBJS := ptrace_user.o sigcontext.o
+USER_OBJS := ptrace_user.o sigcontext.o stub_segv.o
 
-SYMLINKS = bitops.c csum-copy.S csum-partial.c csum-wrappers.c memcpy.S \
+SYMLINKS = bitops.c csum-copy.S csum-partial.c csum-wrappers.c ldt.c memcpy.S \
 	thunk.S module.c
 
 include arch/um/scripts/Makefile.rules
@@ -23,12 +23,11 @@ bitops.c-dir = lib
 csum-copy.S-dir = lib
 csum-partial.c-dir = lib
 csum-wrappers.c-dir = lib
+ldt.c-dir = /arch/um/sys-i386
 memcpy.S-dir = lib
 thunk.S-dir = lib
 module.c-dir = kernel
 
 $(obj)/stub_segv.o: _c_flags = $(call unprofile,$(CFLAGS))
 
-subdir- := util
-
 include arch/um/scripts/Makefile.unmap
diff --git a/arch/um/sys-x86_64/kernel-offsets.c b/arch/um/sys-x86_64/kernel-offsets.c
index 998541eade41..bfcb104b846e 100644
--- a/arch/um/sys-x86_64/kernel-offsets.c
+++ b/arch/um/sys-x86_64/kernel-offsets.c
@@ -19,7 +19,7 @@
 void foo(void)
 {
 #ifdef CONFIG_MODE_TT
-	OFFSET(TASK_EXTERN_PID, task_struct, thread.mode.tt.extern_pid);
+	OFFSET(HOST_TASK_EXTERN_PID, task_struct, thread.mode.tt.extern_pid);
 #endif
 #include <common-offsets.h>
 }
diff --git a/arch/um/sys-x86_64/stub_segv.c b/arch/um/sys-x86_64/stub_segv.c
index 65a131b362b6..a27099533198 100644
--- a/arch/um/sys-x86_64/stub_segv.c
+++ b/arch/um/sys-x86_64/stub_segv.c
@@ -3,30 +3,49 @@
  * Licensed under the GPL
  */
 
-#include <asm/signal.h>
+#include <stddef.h>
+#include <signal.h>
 #include <linux/compiler.h>
 #include <asm/unistd.h>
-#include <asm/ucontext.h>
 #include "uml-config.h"
 #include "sysdep/sigcontext.h"
 #include "sysdep/faultinfo.h"
+#include "sysdep/stub.h"
+
+/* Copied from sys-x86_64/signal.c - Can't find an equivalent definition
+ * in the libc headers anywhere.
+ */
+struct rt_sigframe
+{
+	char *pretcode;
+	struct ucontext uc;
+	struct siginfo info;
+};
+
+/* Copied here from <linux/kernel.h> - we're userspace. */
+#define container_of(ptr, type, member) ({                   \
+	const typeof( ((type *)0)->member ) *__mptr = (ptr); \
+	(type *)( (char *)__mptr - offsetof(type,member) );})
 
 void __attribute__ ((__section__ (".__syscall_stub")))
 stub_segv_handler(int sig)
 {
 	struct ucontext *uc;
+        int pid;
 
 	__asm__("movq %%rdx, %0" : "=g" (uc) :);
-        GET_FAULTINFO_FROM_SC(*((struct faultinfo *) UML_CONFIG_STUB_DATA),
-                              &uc->uc_mcontext);
+	GET_FAULTINFO_FROM_SC(*((struct faultinfo *) UML_CONFIG_STUB_DATA),
+			      &uc->uc_mcontext);
+
+	pid = stub_syscall0(__NR_getpid);
+	stub_syscall2(__NR_kill, pid, SIGUSR1);
 
-	__asm__("movq %0, %%rax ; syscall": : "g" (__NR_getpid));
-	__asm__("movq %%rax, %%rdi ; movq %0, %%rax ; movq %1, %%rsi ;"
-		"syscall": : "g" (__NR_kill), "g" (SIGUSR1));
-	/* Two popqs to restore the stack to the state just before entering
-	 * the handler, one pops the return address, the other pops the frame
-	 * pointer.
+	/* sys_sigreturn expects that the stack pointer will be 8 bytes into
+	 * the signal frame.  So, we use the ucontext pointer, which we know
+	 * already, to get the signal frame pointer, and add 8 to that.
 	 */
-	__asm__("popq %%rax ; popq %%rax ; movq %0, %%rax ; syscall" : : "g"
-		(__NR_rt_sigreturn));
+	__asm__("movq %0, %%rsp; movq %1, %%rax ; syscall": :
+		"g" ((unsigned long) container_of(uc, struct rt_sigframe, 
+						  uc) + 8),
+                "g" (__NR_rt_sigreturn));
 }
diff --git a/arch/um/sys-x86_64/syscalls.c b/arch/um/sys-x86_64/syscalls.c
index 3259a4db4534..6acee5c4ada6 100644
--- a/arch/um/sys-x86_64/syscalls.c
+++ b/arch/um/sys-x86_64/syscalls.c
@@ -29,81 +29,6 @@ asmlinkage long sys_uname64(struct new_utsname __user * name)
 }
 
 #ifdef CONFIG_MODE_TT
-extern int modify_ldt(int func, void *ptr, unsigned long bytecount);
-
-long sys_modify_ldt_tt(int func, void *ptr, unsigned long bytecount)
-{
-	/* XXX This should check VERIFY_WRITE depending on func, check this
-	 * in i386 as well.
-	 */
-	if (!access_ok(VERIFY_READ, ptr, bytecount))
-		return -EFAULT;
-	return(modify_ldt(func, ptr, bytecount));
-}
-#endif
-
-#ifdef CONFIG_MODE_SKAS
-extern int userspace_pid[];
-
-#include "skas_ptrace.h"
-
-long sys_modify_ldt_skas(int func, void *ptr, unsigned long bytecount)
-{
-	struct ptrace_ldt ldt;
-        void *buf;
-        int res, n;
-
-        buf = kmalloc(bytecount, GFP_KERNEL);
-        if(buf == NULL)
-                return(-ENOMEM);
-
-        res = 0;
-
-        switch(func){
-        case 1:
-        case 0x11:
-                res = copy_from_user(buf, ptr, bytecount);
-                break;
-        }
-
-        if(res != 0){
-                res = -EFAULT;
-                goto out;
-        }
-
-	ldt = ((struct ptrace_ldt) { .func	= func,
-				     .ptr	= buf,
-				     .bytecount = bytecount });
-#warning Need to look up userspace_pid by cpu
-	res = ptrace(PTRACE_LDT, userspace_pid[0], 0, (unsigned long) &ldt);
-        if(res < 0)
-                goto out;
-
-        switch(func){
-        case 0:
-        case 2:
-                n = res;
-                res = copy_to_user(ptr, buf, n);
-                if(res != 0)
-                        res = -EFAULT;
-                else
-                        res = n;
-                break;
-        }
-
- out:
-        kfree(buf);
-        return(res);
-}
-#endif
-
-long sys_modify_ldt(int func, void *ptr, unsigned long bytecount)
-{
-        return(CHOOSE_MODE_PROC(sys_modify_ldt_tt, sys_modify_ldt_skas, func,
-                                ptr, bytecount));
-}
-
-#ifdef CONFIG_MODE_TT
 extern long arch_prctl(int code, unsigned long addr);
 
 static long arch_prctl_tt(int code, unsigned long addr)
diff --git a/arch/um/sys-x86_64/user-offsets.c b/arch/um/sys-x86_64/user-offsets.c
index 513d17ceafd4..5a585bfbb8c2 100644
--- a/arch/um/sys-x86_64/user-offsets.c
+++ b/arch/um/sys-x86_64/user-offsets.c
@@ -16,71 +16,76 @@ typedef __u32 u32;
 #define DEFINE(sym, val) \
         asm volatile("\n->" #sym " %0 " #val : : "i" (val))
 
+#define DEFINE_LONGS(sym, val) \
+        asm volatile("\n->" #sym " %0 " #val : : "i" (val/sizeof(unsigned long)))
+
 #define OFFSET(sym, str, mem) \
 	DEFINE(sym, offsetof(struct str, mem));
 
 void foo(void)
 {
-	OFFSET(SC_RBX, sigcontext, rbx);
-	OFFSET(SC_RCX, sigcontext, rcx);
-	OFFSET(SC_RDX, sigcontext, rdx);
-	OFFSET(SC_RSI, sigcontext, rsi);
-	OFFSET(SC_RDI, sigcontext, rdi);
-	OFFSET(SC_RBP, sigcontext, rbp);
-	OFFSET(SC_RAX, sigcontext, rax);
-	OFFSET(SC_R8, sigcontext, r8);
-	OFFSET(SC_R9, sigcontext, r9);
-	OFFSET(SC_R10, sigcontext, r10);
-	OFFSET(SC_R11, sigcontext, r11);
-	OFFSET(SC_R12, sigcontext, r12);
-	OFFSET(SC_R13, sigcontext, r13);
-	OFFSET(SC_R14, sigcontext, r14);
-	OFFSET(SC_R15, sigcontext, r15);
-	OFFSET(SC_IP, sigcontext, rip);
-	OFFSET(SC_SP, sigcontext, rsp);
-	OFFSET(SC_CR2, sigcontext, cr2);
-	OFFSET(SC_ERR, sigcontext, err);
-	OFFSET(SC_TRAPNO, sigcontext, trapno);
-	OFFSET(SC_CS, sigcontext, cs);
-	OFFSET(SC_FS, sigcontext, fs);
-	OFFSET(SC_GS, sigcontext, gs);
-	OFFSET(SC_EFLAGS, sigcontext, eflags);
-	OFFSET(SC_SIGMASK, sigcontext, oldmask);
+	OFFSET(HOST_SC_RBX, sigcontext, rbx);
+	OFFSET(HOST_SC_RCX, sigcontext, rcx);
+	OFFSET(HOST_SC_RDX, sigcontext, rdx);
+	OFFSET(HOST_SC_RSI, sigcontext, rsi);
+	OFFSET(HOST_SC_RDI, sigcontext, rdi);
+	OFFSET(HOST_SC_RBP, sigcontext, rbp);
+	OFFSET(HOST_SC_RAX, sigcontext, rax);
+	OFFSET(HOST_SC_R8, sigcontext, r8);
+	OFFSET(HOST_SC_R9, sigcontext, r9);
+	OFFSET(HOST_SC_R10, sigcontext, r10);
+	OFFSET(HOST_SC_R11, sigcontext, r11);
+	OFFSET(HOST_SC_R12, sigcontext, r12);
+	OFFSET(HOST_SC_R13, sigcontext, r13);
+	OFFSET(HOST_SC_R14, sigcontext, r14);
+	OFFSET(HOST_SC_R15, sigcontext, r15);
+	OFFSET(HOST_SC_IP, sigcontext, rip);
+	OFFSET(HOST_SC_SP, sigcontext, rsp);
+	OFFSET(HOST_SC_CR2, sigcontext, cr2);
+	OFFSET(HOST_SC_ERR, sigcontext, err);
+	OFFSET(HOST_SC_TRAPNO, sigcontext, trapno);
+	OFFSET(HOST_SC_CS, sigcontext, cs);
+	OFFSET(HOST_SC_FS, sigcontext, fs);
+	OFFSET(HOST_SC_GS, sigcontext, gs);
+	OFFSET(HOST_SC_EFLAGS, sigcontext, eflags);
+	OFFSET(HOST_SC_SIGMASK, sigcontext, oldmask);
 #if 0
-	OFFSET(SC_ORIG_RAX, sigcontext, orig_rax);
-	OFFSET(SC_DS, sigcontext, ds);
-	OFFSET(SC_ES, sigcontext, es);
-	OFFSET(SC_SS, sigcontext, ss);
+	OFFSET(HOST_SC_ORIG_RAX, sigcontext, orig_rax);
+	OFFSET(HOST_SC_DS, sigcontext, ds);
+	OFFSET(HOST_SC_ES, sigcontext, es);
+	OFFSET(HOST_SC_SS, sigcontext, ss);
 #endif
 
-	DEFINE(HOST_FRAME_SIZE, FRAME_SIZE);
-	DEFINE(HOST_RBX, RBX);
-	DEFINE(HOST_RCX, RCX);
-	DEFINE(HOST_RDI, RDI);
-	DEFINE(HOST_RSI, RSI);
-	DEFINE(HOST_RDX, RDX);
-	DEFINE(HOST_RBP, RBP);
-	DEFINE(HOST_RAX, RAX);
-	DEFINE(HOST_R8, R8);
-	DEFINE(HOST_R9, R9);
-	DEFINE(HOST_R10, R10);
-	DEFINE(HOST_R11, R11);
-	DEFINE(HOST_R12, R12);
-	DEFINE(HOST_R13, R13);
-	DEFINE(HOST_R14, R14);
-	DEFINE(HOST_R15, R15);
-	DEFINE(HOST_ORIG_RAX, ORIG_RAX);
-	DEFINE(HOST_CS, CS);
-	DEFINE(HOST_SS, SS);
-	DEFINE(HOST_EFLAGS, EFLAGS);
+	DEFINE_LONGS(HOST_FRAME_SIZE, FRAME_SIZE);
+	DEFINE(HOST_FP_SIZE, 0);
+	DEFINE(HOST_XFP_SIZE, 0);
+	DEFINE_LONGS(HOST_RBX, RBX);
+	DEFINE_LONGS(HOST_RCX, RCX);
+	DEFINE_LONGS(HOST_RDI, RDI);
+	DEFINE_LONGS(HOST_RSI, RSI);
+	DEFINE_LONGS(HOST_RDX, RDX);
+	DEFINE_LONGS(HOST_RBP, RBP);
+	DEFINE_LONGS(HOST_RAX, RAX);
+	DEFINE_LONGS(HOST_R8, R8);
+	DEFINE_LONGS(HOST_R9, R9);
+	DEFINE_LONGS(HOST_R10, R10);
+	DEFINE_LONGS(HOST_R11, R11);
+	DEFINE_LONGS(HOST_R12, R12);
+	DEFINE_LONGS(HOST_R13, R13);
+	DEFINE_LONGS(HOST_R14, R14);
+	DEFINE_LONGS(HOST_R15, R15);
+	DEFINE_LONGS(HOST_ORIG_RAX, ORIG_RAX);
+	DEFINE_LONGS(HOST_CS, CS);
+	DEFINE_LONGS(HOST_SS, SS);
+	DEFINE_LONGS(HOST_EFLAGS, EFLAGS);
 #if 0
-	DEFINE(HOST_FS, FS);
-	DEFINE(HOST_GS, GS);
-	DEFINE(HOST_DS, DS);
-	DEFINE(HOST_ES, ES);
+	DEFINE_LONGS(HOST_FS, FS);
+	DEFINE_LONGS(HOST_GS, GS);
+	DEFINE_LONGS(HOST_DS, DS);
+	DEFINE_LONGS(HOST_ES, ES);
 #endif
 
-	DEFINE(HOST_IP, RIP);
-	DEFINE(HOST_SP, RSP);
-	DEFINE(__UM_FRAME_SIZE, sizeof(struct user_regs_struct));
+	DEFINE_LONGS(HOST_IP, RIP);
+	DEFINE_LONGS(HOST_SP, RSP);
+	DEFINE(UM_FRAME_SIZE, sizeof(struct user_regs_struct));
 }
diff --git a/arch/um/sys-x86_64/util/Makefile b/arch/um/sys-x86_64/util/Makefile
deleted file mode 100644
index 75b052cfc206..000000000000
--- a/arch/um/sys-x86_64/util/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# Copyright 2003 - 2004 Pathscale, Inc
-# Released under the GPL
-
-hostprogs-y	:= mk_sc mk_thread
-always		:= $(hostprogs-y)
-
-HOSTCFLAGS_mk_sc.o := -I$(objtree)/arch/um
-HOSTCFLAGS_mk_thread.o := -I$(objtree)/arch/um
diff --git a/arch/um/sys-x86_64/util/mk_sc.c b/arch/um/sys-x86_64/util/mk_sc.c
deleted file mode 100644
index 7619bc377c1f..000000000000
--- a/arch/um/sys-x86_64/util/mk_sc.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/* Copyright (C) 2003 - 2004 PathScale, Inc
- * Released under the GPL
- */
-
-#include <stdio.h>
-#include <user-offsets.h>
-
-#define SC_OFFSET(name) \
-  printf("#define " #name \
-	 "(sc) *((unsigned long *) &(((char *) (sc))[%d]))\n",\
-	 name)
-
-int main(int argc, char **argv)
-{
-  SC_OFFSET(SC_RBX);
-  SC_OFFSET(SC_RCX);
-  SC_OFFSET(SC_RDX);
-  SC_OFFSET(SC_RSI);
-  SC_OFFSET(SC_RDI);
-  SC_OFFSET(SC_RBP);
-  SC_OFFSET(SC_RAX);
-  SC_OFFSET(SC_R8);
-  SC_OFFSET(SC_R9);
-  SC_OFFSET(SC_R10);
-  SC_OFFSET(SC_R11);
-  SC_OFFSET(SC_R12);
-  SC_OFFSET(SC_R13);
-  SC_OFFSET(SC_R14);
-  SC_OFFSET(SC_R15);
-  SC_OFFSET(SC_IP);
-  SC_OFFSET(SC_SP);
-  SC_OFFSET(SC_CR2);
-  SC_OFFSET(SC_ERR);
-  SC_OFFSET(SC_TRAPNO);
-  SC_OFFSET(SC_CS);
-  SC_OFFSET(SC_FS);
-  SC_OFFSET(SC_GS);
-  SC_OFFSET(SC_EFLAGS);
-  SC_OFFSET(SC_SIGMASK);
-#if 0
-  SC_OFFSET(SC_ORIG_RAX);
-  SC_OFFSET(SC_DS);
-  SC_OFFSET(SC_ES);
-  SC_OFFSET(SC_SS);
-#endif
-  return(0);
-}
diff --git a/arch/um/sys-x86_64/util/mk_thread.c b/arch/um/sys-x86_64/util/mk_thread.c
deleted file mode 100644
index 15517396e9cf..000000000000
--- a/arch/um/sys-x86_64/util/mk_thread.c
+++ /dev/null
@@ -1,20 +0,0 @@
-#include <stdio.h>
-#include <kernel-offsets.h>
-
-int main(int argc, char **argv)
-{
-  printf("/*\n");
-  printf(" * Generated by mk_thread\n");
-  printf(" */\n");
-  printf("\n");
-  printf("#ifndef __UM_THREAD_H\n");
-  printf("#define __UM_THREAD_H\n");
-  printf("\n");
-#ifdef TASK_EXTERN_PID
-  printf("#define TASK_EXTERN_PID(task) *((int *) &(((char *) (task))[%d]))\n",
-	 TASK_EXTERN_PID);
-#endif
-  printf("\n");
-  printf("#endif\n");
-  return(0);
-}
diff --git a/arch/um/util/Makefile b/arch/um/util/Makefile
deleted file mode 100644
index 4c7551c28033..000000000000
--- a/arch/um/util/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-hostprogs-y		:= mk_task mk_constants
-always			:= $(hostprogs-y)
-
-HOSTCFLAGS_mk_task.o := -I$(objtree)/arch/um
-HOSTCFLAGS_mk_constants.o := -I$(objtree)/arch/um
diff --git a/arch/um/util/mk_constants.c b/arch/um/util/mk_constants.c
deleted file mode 100644
index ab217becc36a..000000000000
--- a/arch/um/util/mk_constants.c
+++ /dev/null
@@ -1,32 +0,0 @@
-#include <stdio.h>
-#include <kernel-offsets.h>
-
-#define SHOW_INT(sym) printf("#define %s %d\n", #sym, sym)
-#define SHOW_STR(sym) printf("#define %s %s\n", #sym, sym)
-
-int main(int argc, char **argv)
-{
-  printf("/*\n");
-  printf(" * Generated by mk_constants\n");
-  printf(" */\n");
-  printf("\n");
-  printf("#ifndef __UM_CONSTANTS_H\n");
-  printf("#define __UM_CONSTANTS_H\n");
-  printf("\n");
-
-  SHOW_INT(UM_KERN_PAGE_SIZE);
-
-  SHOW_STR(UM_KERN_EMERG);
-  SHOW_STR(UM_KERN_ALERT);
-  SHOW_STR(UM_KERN_CRIT);
-  SHOW_STR(UM_KERN_ERR);
-  SHOW_STR(UM_KERN_WARNING);
-  SHOW_STR(UM_KERN_NOTICE);
-  SHOW_STR(UM_KERN_INFO);
-  SHOW_STR(UM_KERN_DEBUG);
-
-  SHOW_INT(UM_NSEC_PER_SEC);
-  printf("\n");
-  printf("#endif\n");
-  return(0);
-}
diff --git a/arch/um/util/mk_task.c b/arch/um/util/mk_task.c
deleted file mode 100644
index 36c9606505e2..000000000000
--- a/arch/um/util/mk_task.c
+++ /dev/null
@@ -1,30 +0,0 @@
-#include <stdio.h>
-#include <kernel-offsets.h>
-
-void print_ptr(char *name, char *type, int offset)
-{
-  printf("#define %s(task) ((%s *) &(((char *) (task))[%d]))\n", name, type,
-	 offset);
-}
-
-void print(char *name, char *type, int offset)
-{
-  printf("#define %s(task) *((%s *) &(((char *) (task))[%d]))\n", name, type,
-	 offset);
-}
-
-int main(int argc, char **argv)
-{
-  printf("/*\n");
-  printf(" * Generated by mk_task\n");
-  printf(" */\n");
-  printf("\n");
-  printf("#ifndef __TASK_H\n");
-  printf("#define __TASK_H\n");
-  printf("\n");
-  print_ptr("TASK_REGS", "union uml_pt_regs", TASK_REGS);
-  print("TASK_PID", "int", TASK_PID);
-  printf("\n");
-  printf("#endif\n");
-  return(0);
-}
diff --git a/arch/v850/Kconfig b/arch/v850/Kconfig
index 89c053b6c2c4..310865903234 100644
--- a/arch/v850/Kconfig
+++ b/arch/v850/Kconfig
@@ -23,6 +23,14 @@ config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
 
+config GENERIC_HARDIRQS
+	bool
+	default y
+
+config GENERIC_IRQ_PROBE
+	bool
+	default y
+
 # Turn off some random 386 crap that can affect device config
 config ISA
 	bool
diff --git a/arch/v850/kernel/irq.c b/arch/v850/kernel/irq.c
index 9e85969ba976..7a151c26f82e 100644
--- a/arch/v850/kernel/irq.c
+++ b/arch/v850/kernel/irq.c
@@ -1,8 +1,8 @@
 /*
  * arch/v850/kernel/irq.c -- High-level interrupt handling
  *
- *  Copyright (C) 2001,02,03,04  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03,04  Miles Bader <miles@gnu.org>
+ *  Copyright (C) 2001,02,03,04,05  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03,04,05  Miles Bader <miles@gnu.org>
  *  Copyright (C) 1994-2000  Ralf Baechle
  *  Copyright (C) 1992  Linus Torvalds
  *
@@ -27,55 +27,15 @@
 #include <asm/system.h>
 
 /*
- * Controller mappings for all interrupt sources:
+ * 'what should we do if we get a hw irq event on an illegal vector'.
+ * each architecture has to answer this themselves, it doesn't deserve
+ * a generic callback i think.
  */
-irq_desc_t irq_desc[NR_IRQS] __cacheline_aligned = {
-	[0 ... NR_IRQS-1] = {
-		.handler = &no_irq_type,
-		.lock = SPIN_LOCK_UNLOCKED
-	}
-};
-
-/*
- * Special irq handlers.
- */
-
-irqreturn_t no_action(int cpl, void *dev_id, struct pt_regs *regs)
-{
-	return IRQ_NONE;
-}
-
-/*
- * Generic no controller code
- */
-
-static void enable_none(unsigned int irq) { }
-static unsigned int startup_none(unsigned int irq) { return 0; }
-static void disable_none(unsigned int irq) { }
-static void ack_none(unsigned int irq)
+void ack_bad_irq(unsigned int irq)
 {
-	/*
-	 * 'what should we do if we get a hw irq event on an illegal vector'.
-	 * each architecture has to answer this themselves, it doesn't deserve
-	 * a generic callback i think.
-	 */
 	printk("received IRQ %d with unknown interrupt type\n", irq);
 }
 
-/* startup is the same as "enable", shutdown is same as "disable" */
-#define shutdown_none	disable_none
-#define end_none	enable_none
-
-struct hw_interrupt_type no_irq_type = {
-	.typename = "none",
-	.startup = startup_none,
-	.shutdown = shutdown_none,
-	.enable = enable_none,
-	.disable = disable_none,
-	.ack = ack_none,
-	.end = end_none
-};
-
 volatile unsigned long irq_err_count, spurious_count;
 
 /*
@@ -84,643 +44,68 @@ volatile unsigned long irq_err_count, spurious_count;
 
 int show_interrupts(struct seq_file *p, void *v)
 {
-	int i = *(loff_t *) v;
-	struct irqaction * action;
-	unsigned long flags;
+	int irq = *(loff_t *) v;
 
-	if (i == 0) {
+	if (irq == 0) {
+		int cpu;
 		seq_puts(p, "           ");
-		for (i=0; i < 1 /*smp_num_cpus*/; i++)
-			seq_printf(p, "CPU%d       ", i);
+		for (cpu=0; cpu < 1 /*smp_num_cpus*/; cpu++)
+			seq_printf(p, "CPU%d       ", cpu);
 		seq_putc(p, '\n');
 	}
 
-	if (i < NR_IRQS) {
-		int j, count, num;
-		const char *type_name = irq_desc[i].handler->typename;
-		spin_lock_irqsave(&irq_desc[j].lock, flags);
-		action = irq_desc[i].action;
-		if (!action) 
-			goto skip;
+	if (irq < NR_IRQS) {
+		unsigned long flags;
+		struct irqaction *action;
 
-		count = 0;
-		num = -1;
-		for (j = 0; j < NR_IRQS; j++)
-			if (irq_desc[j].handler->typename == type_name) {
-				if (i == j)
-					num = count;
-				count++;
-			}
+		spin_lock_irqsave(&irq_desc[irq].lock, flags);
 
-		seq_printf(p, "%3d: ",i);
-		seq_printf(p, "%10u ", kstat_irqs(i));
-		if (count > 1) {
-			int prec = (num >= 100 ? 3 : num >= 10 ? 2 : 1);
-			seq_printf(p, " %*s%d", 14 - prec, type_name, num);
-		} else
-			seq_printf(p, " %14s", type_name);
+		action = irq_desc[irq].action;
+		if (action) {
+			int j;
+			int count = 0;
+			int num = -1;
+			const char *type_name = irq_desc[irq].handler->typename;
+
+			for (j = 0; j < NR_IRQS; j++)
+				if (irq_desc[j].handler->typename == type_name){
+					if (irq == j)
+						num = count;
+					count++;
+				}
+
+			seq_printf(p, "%3d: ",irq);
+			seq_printf(p, "%10u ", kstat_irqs(irq));
+			if (count > 1) {
+				int prec = (num >= 100 ? 3 : num >= 10 ? 2 : 1);
+				seq_printf(p, " %*s%d", 14 - prec,
+					   type_name, num);
+			} else
+				seq_printf(p, " %14s", type_name);
 		
-		seq_printf(p, "  %s", action->name);
-		for (action=action->next; action; action = action->next)
-			seq_printf(p, ", %s", action->name);
-		seq_putc(p, '\n');
-skip:
-		spin_unlock_irqrestore(&irq_desc[j].lock, flags);
-	} else if (i == NR_IRQS)
-		seq_printf(p, "ERR: %10lu\n", irq_err_count);
-	return 0;
-}
-
-/*
- * This should really return information about whether
- * we should do bottom half handling etc. Right now we
- * end up _always_ checking the bottom half, which is a
- * waste of time and is not what some drivers would
- * prefer.
- */
-int handle_IRQ_event(unsigned int irq, struct pt_regs * regs, struct irqaction * action)
-{
-	int status = 1; /* Force the "do bottom halves" bit */
-	int ret;
-
-	if (!(action->flags & SA_INTERRUPT))
-		local_irq_enable();
-
-	do {
-		ret = action->handler(irq, action->dev_id, regs);
-		if (ret == IRQ_HANDLED)
-			status |= action->flags;
-		action = action->next;
-	} while (action);
-	if (status & SA_SAMPLE_RANDOM)
-		add_interrupt_randomness(irq);
-	local_irq_disable();
-
-	return status;
-}
-
-/*
- * Generic enable/disable code: this just calls
- * down into the PIC-specific version for the actual
- * hardware disable after having gotten the irq
- * controller lock. 
- */
- 
-/**
- *	disable_irq_nosync - disable an irq without waiting
- *	@irq: Interrupt to disable
- *
- *	Disable the selected interrupt line. Disables of an interrupt
- *	stack. Unlike disable_irq(), this function does not ensure existing
- *	instances of the IRQ handler have completed before returning.
- *
- *	This function may be called from IRQ context.
- */
- 
-void inline disable_irq_nosync(unsigned int irq)
-{
-	irq_desc_t *desc = irq_desc + irq;
-	unsigned long flags;
-
-	spin_lock_irqsave(&desc->lock, flags);
-	if (!desc->depth++) {
-		desc->status |= IRQ_DISABLED;
-		desc->handler->disable(irq);
-	}
-	spin_unlock_irqrestore(&desc->lock, flags);
-}
-
-/**
- *	disable_irq - disable an irq and wait for completion
- *	@irq: Interrupt to disable
- *
- *	Disable the selected interrupt line. Disables of an interrupt
- *	stack. That is for two disables you need two enables. This
- *	function waits for any pending IRQ handlers for this interrupt
- *	to complete before returning. If you use this function while
- *	holding a resource the IRQ handler may need you will deadlock.
- *
- *	This function may be called - with care - from IRQ context.
- */
- 
-void disable_irq(unsigned int irq)
-{
-	disable_irq_nosync(irq);
-	synchronize_irq(irq);
-}
+			seq_printf(p, "  %s", action->name);
+			for (action=action->next; action; action = action->next)
+				seq_printf(p, ", %s", action->name);
+			seq_putc(p, '\n');
+		}
 
-/**
- *	enable_irq - enable interrupt handling on an irq
- *	@irq: Interrupt to enable
- *
- *	Re-enables the processing of interrupts on this IRQ line
- *	providing no disable_irq calls are now in effect.
- *
- *	This function may be called from IRQ context.
- */
- 
-void enable_irq(unsigned int irq)
-{
-	irq_desc_t *desc = irq_desc + irq;
-	unsigned long flags;
+		spin_unlock_irqrestore(&irq_desc[irq].lock, flags);
+	} else if (irq == NR_IRQS)
+		seq_printf(p, "ERR: %10lu\n", irq_err_count);
 
-	spin_lock_irqsave(&desc->lock, flags);
-	switch (desc->depth) {
-	case 1: {
-		unsigned int status = desc->status & ~IRQ_DISABLED;
-		desc->status = status;
-		if ((status & (IRQ_PENDING | IRQ_REPLAY)) == IRQ_PENDING) {
-			desc->status = status | IRQ_REPLAY;
-			hw_resend_irq(desc->handler,irq);
-		}
-		desc->handler->enable(irq);
-		/* fall-through */
-	}
-	default:
-		desc->depth--;
-		break;
-	case 0:
-		printk("enable_irq(%u) unbalanced from %p\n", irq,
-		       __builtin_return_address(0));
-	}
-	spin_unlock_irqrestore(&desc->lock, flags);
+	return 0;
 }
 
 /* Handle interrupt IRQ.  REGS are the registers at the time of ther
    interrupt.  */
 unsigned int handle_irq (int irq, struct pt_regs *regs)
 {
-	/* 
-	 * We ack quickly, we don't want the irq controller
-	 * thinking we're snobs just because some other CPU has
-	 * disabled global interrupts (we have already done the
-	 * INT_ACK cycles, it's too late to try to pretend to the
-	 * controller that we aren't taking the interrupt).
-	 *
-	 * 0 return value means that this irq is already being
-	 * handled by some other CPU. (or is disabled)
-	 */
-	int cpu = smp_processor_id();
-	irq_desc_t *desc = irq_desc + irq;
-	struct irqaction * action;
-	unsigned int status;
-
 	irq_enter();
-	kstat_cpu(cpu).irqs[irq]++;
-	spin_lock(&desc->lock);
-	desc->handler->ack(irq);
-	/*
-	   REPLAY is when Linux resends an IRQ that was dropped earlier
-	   WAITING is used by probe to mark irqs that are being tested
-	   */
-	status = desc->status & ~(IRQ_REPLAY | IRQ_WAITING);
-	status |= IRQ_PENDING; /* we _want_ to handle it */
-
-	/*
-	 * If the IRQ is disabled for whatever reason, we cannot
-	 * use the action we have.
-	 */
-	action = NULL;
-	if (likely(!(status & (IRQ_DISABLED | IRQ_INPROGRESS)))) {
-		action = desc->action;
-		status &= ~IRQ_PENDING; /* we commit to handling */
-		status |= IRQ_INPROGRESS; /* we are handling it */
-	}
-	desc->status = status;
-
-	/*
-	 * If there is no IRQ handler or it was disabled, exit early.
-	   Since we set PENDING, if another processor is handling
-	   a different instance of this same irq, the other processor
-	   will take care of it.
-	 */
-	if (unlikely(!action))
-		goto out;
-
-	/*
-	 * Edge triggered interrupts need to remember
-	 * pending events.
-	 * This applies to any hw interrupts that allow a second
-	 * instance of the same irq to arrive while we are in handle_irq
-	 * or in the handler. But the code here only handles the _second_
-	 * instance of the irq, not the third or fourth. So it is mostly
-	 * useful for irq hardware that does not mask cleanly in an
-	 * SMP environment.
-	 */
-	for (;;) {
-		spin_unlock(&desc->lock);
-		handle_IRQ_event(irq, regs, action);
-		spin_lock(&desc->lock);
-		
-		if (likely(!(desc->status & IRQ_PENDING)))
-			break;
-		desc->status &= ~IRQ_PENDING;
-	}
-	desc->status &= ~IRQ_INPROGRESS;
-
-out:
-	/*
-	 * The ->end() handler has to deal with interrupts which got
-	 * disabled while the handler was running.
-	 */
-	desc->handler->end(irq);
-	spin_unlock(&desc->lock);
-
+	__do_IRQ(irq, regs);
 	irq_exit();
-
 	return 1;
 }
 
-/**
- *	request_irq - allocate an interrupt line
- *	@irq: Interrupt line to allocate
- *	@handler: Function to be called when the IRQ occurs
- *	@irqflags: Interrupt type flags
- *	@devname: An ascii name for the claiming device
- *	@dev_id: A cookie passed back to the handler function
- *
- *	This call allocates interrupt resources and enables the
- *	interrupt line and IRQ handling. From the point this
- *	call is made your handler function may be invoked. Since
- *	your handler function must clear any interrupt the board 
- *	raises, you must take care both to initialise your hardware
- *	and to set up the interrupt handler in the right order.
- *
- *	Dev_id must be globally unique. Normally the address of the
- *	device data structure is used as the cookie. Since the handler
- *	receives this value it makes sense to use it.
- *
- *	If your interrupt is shared you must pass a non NULL dev_id
- *	as this is required when freeing the interrupt.
- *
- *	Flags:
- *
- *	SA_SHIRQ		Interrupt is shared
- *
- *	SA_INTERRUPT		Disable local interrupts while processing
- *
- *	SA_SAMPLE_RANDOM	The interrupt can be used for entropy
- *
- */
- 
-int request_irq(unsigned int irq, 
-		irqreturn_t (*handler)(int, void *, struct pt_regs *),
-		unsigned long irqflags, 
-		const char * devname,
-		void *dev_id)
-{
-	int retval;
-	struct irqaction * action;
-
-#if 1
-	/*
-	 * Sanity-check: shared interrupts should REALLY pass in
-	 * a real dev-ID, otherwise we'll have trouble later trying
-	 * to figure out which interrupt is which (messes up the
-	 * interrupt freeing logic etc).
-	 */
-	if (irqflags & SA_SHIRQ) {
-		if (!dev_id)
-			printk("Bad boy: %s (at 0x%x) called us without a dev_id!\n", devname, (&irq)[-1]);
-	}
-#endif
-
-	if (irq >= NR_IRQS)
-		return -EINVAL;
-	if (!handler)
-		return -EINVAL;
-
-	action = (struct irqaction *)
-			kmalloc(sizeof(struct irqaction), GFP_KERNEL);
-	if (!action)
-		return -ENOMEM;
-
-	action->handler = handler;
-	action->flags = irqflags;
-	cpus_clear(action->mask);
-	action->name = devname;
-	action->next = NULL;
-	action->dev_id = dev_id;
-
-	retval = setup_irq(irq, action);
-	if (retval)
-		kfree(action);
-	return retval;
-}
-
-EXPORT_SYMBOL(request_irq);
-
-/**
- *	free_irq - free an interrupt
- *	@irq: Interrupt line to free
- *	@dev_id: Device identity to free
- *
- *	Remove an interrupt handler. The handler is removed and if the
- *	interrupt line is no longer in use by any driver it is disabled.
- *	On a shared IRQ the caller must ensure the interrupt is disabled
- *	on the card it drives before calling this function. The function
- *	does not return until any executing interrupts for this IRQ
- *	have completed.
- *
- *	This function may be called from interrupt context. 
- *
- *	Bugs: Attempting to free an irq in a handler for the same irq hangs
- *	      the machine.
- */
- 
-void free_irq(unsigned int irq, void *dev_id)
-{
-	irq_desc_t *desc;
-	struct irqaction **p;
-	unsigned long flags;
-
-	if (irq >= NR_IRQS)
-		return;
-
-	desc = irq_desc + irq;
-	spin_lock_irqsave(&desc->lock,flags);
-	p = &desc->action;
-	for (;;) {
-		struct irqaction * action = *p;
-		if (action) {
-			struct irqaction **pp = p;
-			p = &action->next;
-			if (action->dev_id != dev_id)
-				continue;
-
-			/* Found it - now remove it from the list of entries */
-			*pp = action->next;
-			if (!desc->action) {
-				desc->status |= IRQ_DISABLED;
-				desc->handler->shutdown(irq);
-			}
-			spin_unlock_irqrestore(&desc->lock,flags);
-
-			synchronize_irq(irq);
-			kfree(action);
-			return;
-		}
-		printk("Trying to free free IRQ%d\n",irq);
-		spin_unlock_irqrestore(&desc->lock,flags);
-		return;
-	}
-}
-
-EXPORT_SYMBOL(free_irq);
-
-/*
- * IRQ autodetection code..
- *
- * This depends on the fact that any interrupt that
- * comes in on to an unassigned handler will get stuck
- * with "IRQ_WAITING" cleared and the interrupt
- * disabled.
- */
-
-static DECLARE_MUTEX(probe_sem);
-
-/**
- *	probe_irq_on	- begin an interrupt autodetect
- *
- *	Commence probing for an interrupt. The interrupts are scanned
- *	and a mask of potential interrupt lines is returned.
- *
- */
- 
-unsigned long probe_irq_on(void)
-{
-	unsigned int i;
-	irq_desc_t *desc;
-	unsigned long val;
-	unsigned long delay;
-
-	down(&probe_sem);
-	/* 
-	 * something may have generated an irq long ago and we want to
-	 * flush such a longstanding irq before considering it as spurious. 
-	 */
-	for (i = NR_IRQS-1; i > 0; i--)  {
-		desc = irq_desc + i;
-
-		spin_lock_irq(&desc->lock);
-		if (!irq_desc[i].action) 
-			irq_desc[i].handler->startup(i);
-		spin_unlock_irq(&desc->lock);
-	}
-
-	/* Wait for longstanding interrupts to trigger. */
-	for (delay = jiffies + HZ/50; time_after(delay, jiffies); )
-		/* about 20ms delay */ barrier();
-
-	/*
-	 * enable any unassigned irqs
-	 * (we must startup again here because if a longstanding irq
-	 * happened in the previous stage, it may have masked itself)
-	 */
-	for (i = NR_IRQS-1; i > 0; i--) {
-		desc = irq_desc + i;
-
-		spin_lock_irq(&desc->lock);
-		if (!desc->action) {
-			desc->status |= IRQ_AUTODETECT | IRQ_WAITING;
-			if (desc->handler->startup(i))
-				desc->status |= IRQ_PENDING;
-		}
-		spin_unlock_irq(&desc->lock);
-	}
-
-	/*
-	 * Wait for spurious interrupts to trigger
-	 */
-	for (delay = jiffies + HZ/10; time_after(delay, jiffies); )
-		/* about 100ms delay */ barrier();
-
-	/*
-	 * Now filter out any obviously spurious interrupts
-	 */
-	val = 0;
-	for (i = 0; i < NR_IRQS; i++) {
-		irq_desc_t *desc = irq_desc + i;
-		unsigned int status;
-
-		spin_lock_irq(&desc->lock);
-		status = desc->status;
-
-		if (status & IRQ_AUTODETECT) {
-			/* It triggered already - consider it spurious. */
-			if (!(status & IRQ_WAITING)) {
-				desc->status = status & ~IRQ_AUTODETECT;
-				desc->handler->shutdown(i);
-			} else
-				if (i < 32)
-					val |= 1 << i;
-		}
-		spin_unlock_irq(&desc->lock);
-	}
-
-	return val;
-}
-
-EXPORT_SYMBOL(probe_irq_on);
-
-/*
- * Return a mask of triggered interrupts (this
- * can handle only legacy ISA interrupts).
- */
- 
-/**
- *	probe_irq_mask - scan a bitmap of interrupt lines
- *	@val:	mask of interrupts to consider
- *
- *	Scan the ISA bus interrupt lines and return a bitmap of
- *	active interrupts. The interrupt probe logic state is then
- *	returned to its previous value.
- *
- *	Note: we need to scan all the irq's even though we will
- *	only return ISA irq numbers - just so that we reset them
- *	all to a known state.
- */
-unsigned int probe_irq_mask(unsigned long val)
-{
-	int i;
-	unsigned int mask;
-
-	mask = 0;
-	for (i = 0; i < NR_IRQS; i++) {
-		irq_desc_t *desc = irq_desc + i;
-		unsigned int status;
-
-		spin_lock_irq(&desc->lock);
-		status = desc->status;
-
-		if (status & IRQ_AUTODETECT) {
-			if (i < 16 && !(status & IRQ_WAITING))
-				mask |= 1 << i;
-
-			desc->status = status & ~IRQ_AUTODETECT;
-			desc->handler->shutdown(i);
-		}
-		spin_unlock_irq(&desc->lock);
-	}
-	up(&probe_sem);
-
-	return mask & val;
-}
-
-/*
- * Return the one interrupt that triggered (this can
- * handle any interrupt source).
- */
-
-/**
- *	probe_irq_off	- end an interrupt autodetect
- *	@val: mask of potential interrupts (unused)
- *
- *	Scans the unused interrupt lines and returns the line which
- *	appears to have triggered the interrupt. If no interrupt was
- *	found then zero is returned. If more than one interrupt is
- *	found then minus the first candidate is returned to indicate
- *	their is doubt.
- *
- *	The interrupt probe logic state is returned to its previous
- *	value.
- *
- *	BUGS: When used in a module (which arguably shouldnt happen)
- *	nothing prevents two IRQ probe callers from overlapping. The
- *	results of this are non-optimal.
- */
- 
-int probe_irq_off(unsigned long val)
-{
-	int i, irq_found, nr_irqs;
-
-	nr_irqs = 0;
-	irq_found = 0;
-	for (i = 0; i < NR_IRQS; i++) {
-		irq_desc_t *desc = irq_desc + i;
-		unsigned int status;
-
-		spin_lock_irq(&desc->lock);
-		status = desc->status;
-
-		if (status & IRQ_AUTODETECT) {
-			if (!(status & IRQ_WAITING)) {
-				if (!nr_irqs)
-					irq_found = i;
-				nr_irqs++;
-			}
-			desc->status = status & ~IRQ_AUTODETECT;
-			desc->handler->shutdown(i);
-		}
-		spin_unlock_irq(&desc->lock);
-	}
-	up(&probe_sem);
-
-	if (nr_irqs > 1)
-		irq_found = -irq_found;
-	return irq_found;
-}
-
-EXPORT_SYMBOL(probe_irq_off);
-
-/* this was setup_x86_irq but it seems pretty generic */
-int setup_irq(unsigned int irq, struct irqaction * new)
-{
-	int shared = 0;
-	unsigned long flags;
-	struct irqaction *old, **p;
-	irq_desc_t *desc = irq_desc + irq;
-
-	/*
-	 * Some drivers like serial.c use request_irq() heavily,
-	 * so we have to be careful not to interfere with a
-	 * running system.
-	 */
-	if (new->flags & SA_SAMPLE_RANDOM) {
-		/*
-		 * This function might sleep, we want to call it first,
-		 * outside of the atomic block.
-		 * Yes, this might clear the entropy pool if the wrong
-		 * driver is attempted to be loaded, without actually
-		 * installing a new handler, but is this really a problem,
-		 * only the sysadmin is able to do this.
-		 */
-		rand_initialize_irq(irq);
-	}
-
-	/*
-	 * The following block of code has to be executed atomically
-	 */
-	spin_lock_irqsave(&desc->lock,flags);
-	p = &desc->action;
-	if ((old = *p) != NULL) {
-		/* Can't share interrupts unless both agree to */
-		if (!(old->flags & new->flags & SA_SHIRQ)) {
-			spin_unlock_irqrestore(&desc->lock,flags);
-			return -EBUSY;
-		}
-
-		/* add new interrupt at end of irq queue */
-		do {
-			p = &old->next;
-			old = *p;
-		} while (old);
-		shared = 1;
-	}
-
-	*p = new;
-
-	if (!shared) {
-		desc->depth = 0;
-		desc->status &= ~(IRQ_DISABLED | IRQ_AUTODETECT | IRQ_WAITING | IRQ_INPROGRESS);
-		desc->handler->startup(irq);
-	}
-	spin_unlock_irqrestore(&desc->lock,flags);
-
-	/* register_irq_proc(irq); */
-	return 0;
-}
-
 /* Initialize irq handling for IRQs.
    BASE_IRQ, BASE_IRQ+INTERVAL, ..., BASE_IRQ+NUM*INTERVAL
    to IRQ_TYPE.  An IRQ_TYPE of 0 means to use a generic interrupt type.  */
@@ -736,9 +121,3 @@ init_irq_handlers (int base_irq, int num, int interval,
 		base_irq += interval;
 	}
 }
-
-#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL)
-void init_irq_proc(void)
-{
-}
-#endif /* CONFIG_PROC_FS && CONFIG_SYSCTL */
diff --git a/arch/v850/kernel/process.c b/arch/v850/kernel/process.c
index 9c708c32c1f0..39cf247cdae4 100644
--- a/arch/v850/kernel/process.c
+++ b/arch/v850/kernel/process.c
@@ -36,11 +36,8 @@ extern void ret_from_fork (void);
 /* The idle loop.  */
 void default_idle (void)
 {
-	while (1) {
-		while (! need_resched ())
-			asm ("halt; nop; nop; nop; nop; nop" ::: "cc");
-		schedule ();
-	}
+	while (! need_resched ())
+		asm ("halt; nop; nop; nop; nop; nop" ::: "cc");
 }
 
 void (*idle)(void) = default_idle;
@@ -54,7 +51,14 @@ void (*idle)(void) = default_idle;
 void cpu_idle (void)
 {
 	/* endless idle loop with no priority at all */
-	(*idle) ();
+	while (1) {
+		while (!need_resched())
+			(*idle) ();
+
+		preempt_enable_no_resched();
+		schedule();
+		preempt_disable();
+	}
 }
 
 /*
diff --git a/arch/v850/kernel/ptrace.c b/arch/v850/kernel/ptrace.c
index 4726b87f5e5a..18492d02aaf6 100644
--- a/arch/v850/kernel/ptrace.c
+++ b/arch/v850/kernel/ptrace.c
@@ -113,45 +113,10 @@ static int set_single_step (struct task_struct *t, int val)
 	return 1;
 }
 
-int sys_ptrace(long request, long pid, long addr, long data)
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
-	struct task_struct *child;
 	int rval;
 
-	lock_kernel();
-
-	if (request == PTRACE_TRACEME) {
-		/* are we already being traced? */
-		if (current->ptrace & PT_PTRACED) {
-			rval = -EPERM;
-			goto out;
-		}
-		/* set the ptrace bit in the process flags. */
-		current->ptrace |= PT_PTRACED;
-		rval = 0;
-		goto out;
-	}
-	rval = -ESRCH;
-	read_lock(&tasklist_lock);
-	child = find_task_by_pid(pid);
-	if (child)
-		get_task_struct(child);
-	read_unlock(&tasklist_lock);
-	if (!child)
-		goto out;
-
-	rval = -EPERM;
-	if (pid == 1)		/* you may not mess with init */
-		goto out_tsk;
-
-	if (request == PTRACE_ATTACH) {
-		rval = ptrace_attach(child);
-		goto out_tsk;
-	}
-	rval = ptrace_check_attach(child, request == PTRACE_KILL);
-	if (rval < 0)
-		goto out_tsk;
-
 	switch (request) {
 		unsigned long val, copied;
 
@@ -248,11 +213,7 @@ int sys_ptrace(long request, long pid, long addr, long data)
 		rval = -EIO;
 		goto out;
 	}
-
-out_tsk:
-	put_task_struct(child);
-out:
-	unlock_kernel();
+ out:
 	return rval;
 }
 
diff --git a/arch/v850/kernel/time.c b/arch/v850/kernel/time.c
index ea3fd8844ff0..c1e85c2aef65 100644
--- a/arch/v850/kernel/time.c
+++ b/arch/v850/kernel/time.c
@@ -26,10 +26,6 @@
 
 #include "mach.h"
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 #define TICK_SIZE	(tick_nsec / 1000)
 
 /*
diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
index 21afa69a086d..6ece645e4dbe 100644
--- a/arch/x86_64/Kconfig
+++ b/arch/x86_64/Kconfig
@@ -226,22 +226,42 @@ config SCHED_SMT
 
 source "kernel/Kconfig.preempt"
 
-config K8_NUMA
-       bool "K8 NUMA support"
-       select NUMA
+config NUMA
+       bool "Non Uniform Memory Access (NUMA) Support"
        depends on SMP
        help
-	  Enable NUMA (Non Unified Memory Architecture) support for
-	  AMD Opteron Multiprocessor systems. The kernel will try to allocate
-	  memory used by a CPU on the local memory controller of the CPU
-	  and add some more NUMA awareness to the kernel.
-	  This code is recommended on all multiprocessor Opteron systems
-	  and normally doesn't hurt on others.
+	 Enable NUMA (Non Uniform Memory Access) support. The kernel 
+	 will try to allocate memory used by a CPU on the local memory 
+	 controller of the CPU and add some more NUMA awareness to the kernel.
+	 This code is recommended on all multiprocessor Opteron systems.
+	 If the system is EM64T, you should say N unless your system is EM64T 
+	 NUMA. 
+
+config K8_NUMA
+       bool "Old style AMD Opteron NUMA detection"
+       depends on NUMA
+       default y
+       help
+	 Enable K8 NUMA node topology detection.  You should say Y here if
+	 you have a multi processor AMD K8 system. This uses an old
+	 method to read the NUMA configurtion directly from the builtin
+	 Northbridge of Opteron. It is recommended to use X86_64_ACPI_NUMA
+	 instead, which also takes priority if both are compiled in.   
+
+# Dummy CONFIG option to select ACPI_NUMA from drivers/acpi/Kconfig.
+
+config X86_64_ACPI_NUMA
+       bool "ACPI NUMA detection"
+       depends on NUMA
+       select ACPI 
+       select ACPI_NUMA
+       default y
+       help
+	 Enable ACPI SRAT based node topology detection.
 
 config NUMA_EMU
-	bool "NUMA emulation support"
-	select NUMA
-	depends on SMP
+	bool "NUMA emulation"
+	depends on NUMA
 	help
 	  Enable NUMA emulation. A flat machine will be split
 	  into virtual nodes when booted with "numa=fake=N", where N is the
@@ -252,9 +272,6 @@ config ARCH_DISCONTIGMEM_ENABLE
        depends on NUMA
        default y
 
-config NUMA
-       bool
-       default n
 
 config ARCH_DISCONTIGMEM_ENABLE
 	def_bool y
@@ -374,6 +391,14 @@ config X86_MCE_INTEL
 	   Additional support for intel specific MCE features such as
 	   the thermal monitor.
 
+config X86_MCE_AMD
+	bool "AMD MCE features"
+	depends on X86_MCE && X86_LOCAL_APIC
+	default y
+	help
+	   Additional support for AMD specific MCE features such as
+	   the DRAM Error Threshold.
+
 config PHYSICAL_START
 	hex "Physical address where the kernel is loaded" if EMBEDDED
 	default "0x100000"
@@ -502,7 +527,7 @@ config IA32_EMULATION
 	  left.
 
 config IA32_AOUT
-       bool "IA32 a.out support"
+       tristate "IA32 a.out support"
        depends on IA32_EMULATION
        help
          Support old a.out binaries in the 32bit emulation.
@@ -532,8 +557,21 @@ source "drivers/firmware/Kconfig"
 
 source fs/Kconfig
 
+menu "Instrumentation Support"
+        depends on EXPERIMENTAL
+
 source "arch/x86_64/oprofile/Kconfig"
 
+config KPROBES
+	bool "Kprobes (EXPERIMENTAL)"
+	help
+	  Kprobes allows you to trap at almost any kernel address and
+	  execute a callback function.  register_kprobe() establishes
+	  a probepoint and specifies the callback.  Kprobes is useful
+	  for kernel debugging, non-intrusive instrumentation and testing.
+	  If in doubt, say "N".
+endmenu
+
 source "arch/x86_64/Kconfig.debug"
 
 source "security/Kconfig"
diff --git a/arch/x86_64/Kconfig.debug b/arch/x86_64/Kconfig.debug
index 9cf1410d2f5a..e2c6e64a85ec 100644
--- a/arch/x86_64/Kconfig.debug
+++ b/arch/x86_64/Kconfig.debug
@@ -2,15 +2,6 @@ menu "Kernel hacking"
 
 source "lib/Kconfig.debug"
 
-# !SMP for now because the context switch early causes GPF in segment reloading
-# and the GS base checking does the wrong thing then, causing a hang.
-config CHECKING
-	bool "Additional run-time checks"
-	depends on DEBUG_KERNEL && !SMP
-	help
-	  Enables some internal consistency checks for kernel debugging.
-	  You should normally say N.
-
 config INIT_DEBUG
 	bool "Debug __init statements"
 	depends on DEBUG_KERNEL
@@ -33,16 +24,6 @@ config IOMMU_DEBUG
 	 options. See Documentation/x86_64/boot-options.txt for more
 	 details.
 
-config KPROBES
-	bool "Kprobes"
-	depends on DEBUG_KERNEL
-	help
-	  Kprobes allows you to trap at almost any kernel address and
-	  execute a callback function.  register_kprobe() establishes
-	  a probepoint and specifies the callback.  Kprobes is useful
-	  for kernel debugging, non-intrusive instrumentation and testing.
-	  If in doubt, say "N".
-
 config IOMMU_LEAK
        bool "IOMMU leak tracing"
        depends on DEBUG_KERNEL
diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig
index f8db7e500fbf..5d56542fb68f 100644
--- a/arch/x86_64/defconfig
+++ b/arch/x86_64/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-git11
-# Mon Sep 12 16:16:16 2005
+# Linux kernel version: 2.6.14-git7
+# Sat Nov  5 15:55:50 2005
 #
 CONFIG_X86_64=y
 CONFIG_64BIT=y
@@ -35,7 +35,7 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
@@ -93,10 +93,11 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_PREEMPT_BKL=y
+CONFIG_NUMA=y
 CONFIG_K8_NUMA=y
+CONFIG_X86_64_ACPI_NUMA=y
 # CONFIG_NUMA_EMU is not set
 CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_NUMA=y
 CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -107,9 +108,10 @@ CONFIG_DISCONTIGMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_NR_CPUS=32
+CONFIG_HOTPLUG_CPU=y
 CONFIG_HPET_TIMER=y
 CONFIG_X86_PM_TIMER=y
 CONFIG_HPET_EMULATE_RTC=y
@@ -117,6 +119,7 @@ CONFIG_GART_IOMMU=y
 CONFIG_SWIOTLB=y
 CONFIG_X86_MCE=y
 CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_AMD=y
 CONFIG_PHYSICAL_START=0x100000
 # CONFIG_KEXEC is not set
 CONFIG_SECCOMP=y
@@ -136,11 +139,15 @@ CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
 CONFIG_SOFTWARE_SUSPEND=y
 CONFIG_PM_STD_PARTITION=""
+CONFIG_SUSPEND_SMP=y
 
 #
 # ACPI (Advanced Configuration and Power Interface) Support
 #
 CONFIG_ACPI=y
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_SLEEP_PROC_FS=y
+CONFIG_ACPI_SLEEP_PROC_SLEEP=y
 CONFIG_ACPI_AC=y
 CONFIG_ACPI_BATTERY=y
 CONFIG_ACPI_BUTTON=y
@@ -148,6 +155,7 @@ CONFIG_ACPI_BUTTON=y
 CONFIG_ACPI_HOTKEY=m
 CONFIG_ACPI_FAN=y
 CONFIG_ACPI_PROCESSOR=y
+CONFIG_ACPI_HOTPLUG_CPU=y
 CONFIG_ACPI_THERMAL=y
 CONFIG_ACPI_NUMA=y
 # CONFIG_ACPI_ASUS is not set
@@ -158,7 +166,7 @@ CONFIG_ACPI_BLACKLIST_YEAR=2001
 CONFIG_ACPI_EC=y
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
-# CONFIG_ACPI_CONTAINER is not set
+CONFIG_ACPI_CONTAINER=y
 
 #
 # CPU Frequency scaling
@@ -293,7 +301,6 @@ CONFIG_IPV6=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
@@ -312,6 +319,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -354,6 +366,11 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_IOSCHED_AS is not set
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -450,6 +467,7 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
@@ -469,20 +487,24 @@ CONFIG_AIC79XX_DEBUG_MASK=0
 # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 CONFIG_SCSI_SATA=y
 # CONFIG_SCSI_SATA_AHCI is not set
 # CONFIG_SCSI_SATA_SVW is not set
 CONFIG_SCSI_ATA_PIIX=y
 # CONFIG_SCSI_SATA_MV is not set
-# CONFIG_SCSI_SATA_NV is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
+CONFIG_SCSI_SATA_NV=y
+# CONFIG_SCSI_PDC_ADMA is not set
 # CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
 # CONFIG_SCSI_SATA_SX4 is not set
 # CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIL24 is not set
 # CONFIG_SCSI_SATA_SIS is not set
 # CONFIG_SCSI_SATA_ULI is not set
 CONFIG_SCSI_SATA_VIA=y
 # CONFIG_SCSI_SATA_VITESSE is not set
+CONFIG_SCSI_SATA_INTEL_COMBINED=y
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -525,6 +547,7 @@ CONFIG_BLK_DEV_DM=y
 CONFIG_FUSION=y
 CONFIG_FUSION_SPI=y
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 CONFIG_FUSION_MAX_SGE=128
 # CONFIG_FUSION_CTL is not set
 
@@ -564,6 +587,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 CONFIG_NET_VENDOR_3COM=y
 CONFIG_VORTEX=y
 # CONFIG_TYPHOON is not set
@@ -740,7 +764,43 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Watchdog Cards
 #
-# CONFIG_WATCHDOG is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=y
+# CONFIG_ACQUIRE_WDT is not set
+# CONFIG_ADVANTECH_WDT is not set
+# CONFIG_ALIM1535_WDT is not set
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_SC520_WDT is not set
+# CONFIG_EUROTECH_WDT is not set
+# CONFIG_IB700_WDT is not set
+# CONFIG_IBMASR is not set
+# CONFIG_WAFER_WDT is not set
+# CONFIG_I6300ESB_WDT is not set
+# CONFIG_I8XX_TCO is not set
+# CONFIG_SC1200_WDT is not set
+# CONFIG_60XX_WDT is not set
+# CONFIG_SBC8360_WDT is not set
+# CONFIG_CPU5_WDT is not set
+# CONFIG_W83627HF_WDT is not set
+# CONFIG_W83877F_WDT is not set
+# CONFIG_W83977F_WDT is not set
+# CONFIG_MACHZ_WDT is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
 CONFIG_RTC=y
@@ -767,6 +827,7 @@ CONFIG_MAX_RAW_DEVS=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -783,6 +844,7 @@ CONFIG_MAX_RAW_DEVS=256
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_HDAPS is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
@@ -886,12 +948,15 @@ CONFIG_USB_UHCI_HCD=y
 # USB Device Class drivers
 #
 # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -924,6 +989,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
 
 #
 # USB Imaging devices
@@ -1005,7 +1071,7 @@ CONFIG_USB_MON=y
 #
 # CONFIG_EDD is not set
 # CONFIG_DELL_RBU is not set
-CONFIG_DCDBAS=m
+# CONFIG_DCDBAS is not set
 
 #
 # File systems
@@ -1037,7 +1103,7 @@ CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
-# CONFIG_AUTOFS4_FS is not set
+CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
 
 #
@@ -1068,7 +1134,7 @@ CONFIG_TMPFS=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
+CONFIG_RELAYFS_FS=y
 
 #
 # Miscellaneous filesystems
@@ -1186,7 +1252,9 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_VM is not set
 # CONFIG_FRAME_POINTER is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_INIT_DEBUG=y
 # CONFIG_IOMMU_DEBUG is not set
 CONFIG_KPROBES=y
diff --git a/arch/x86_64/ia32/ia32_aout.c b/arch/x86_64/ia32/ia32_aout.c
index 3e6780fa0186..3bf58af98936 100644
--- a/arch/x86_64/ia32/ia32_aout.c
+++ b/arch/x86_64/ia32/ia32_aout.c
@@ -36,9 +36,6 @@
 #undef WARN_OLD
 #undef CORE_DUMP /* probably broken */
 
-extern int ia32_setup_arg_pages(struct linux_binprm *bprm,
-				unsigned long stack_top, int exec_stack);
-
 static int load_aout_binary(struct linux_binprm *, struct pt_regs * regs);
 static int load_aout_library(struct file*);
 
@@ -314,7 +311,6 @@ static int load_aout_binary(struct linux_binprm * bprm, struct pt_regs * regs)
 	current->mm->free_area_cache = TASK_UNMAPPED_BASE;
 	current->mm->cached_hole_size = 0;
 
-	set_mm_counter(current->mm, rss, 0);
 	current->mm->mmap = NULL;
 	compute_creds(bprm);
  	current->flags &= ~PF_FORKNOEXEC;
diff --git a/arch/x86_64/ia32/ia32_binfmt.c b/arch/x86_64/ia32/ia32_binfmt.c
index d9161e395978..830feb272eca 100644
--- a/arch/x86_64/ia32/ia32_binfmt.c
+++ b/arch/x86_64/ia32/ia32_binfmt.c
@@ -335,7 +335,8 @@ static void elf32_init(struct pt_regs *regs)
 	me->thread.es = __USER_DS;
 }
 
-int setup_arg_pages(struct linux_binprm *bprm, unsigned long stack_top, int executable_stack)
+int ia32_setup_arg_pages(struct linux_binprm *bprm, unsigned long stack_top,
+			 int executable_stack)
 {
 	unsigned long stack_base;
 	struct vm_area_struct *mpnt;
@@ -389,6 +390,7 @@ int setup_arg_pages(struct linux_binprm *bprm, unsigned long stack_top, int exec
 	
 	return 0;
 }
+EXPORT_SYMBOL(ia32_setup_arg_pages);
 
 static unsigned long
 elf32_map (struct file *filep, unsigned long addr, struct elf_phdr *eppnt, int prot, int type)
diff --git a/arch/x86_64/ia32/ia32_ioctl.c b/arch/x86_64/ia32/ia32_ioctl.c
index 419758f19ca4..e335bd0b637d 100644
--- a/arch/x86_64/ia32/ia32_ioctl.c
+++ b/arch/x86_64/ia32/ia32_ioctl.c
@@ -12,40 +12,11 @@
 #define INCLUDES
 #include <linux/syscalls.h>
 #include "compat_ioctl.c"
-#include <asm/mtrr.h>
 #include <asm/ia32.h>
 
 #define CODE
 #include "compat_ioctl.c"
   
-#ifndef TIOCGDEV
-#define TIOCGDEV       _IOR('T',0x32, unsigned int)
-#endif
-static int tiocgdev(unsigned fd, unsigned cmd,  unsigned int __user *ptr) 
-{ 
-
-	struct file *file;
-	struct tty_struct *real_tty;
-	int fput_needed, ret;
-
-	file = fget_light(fd, &fput_needed);
-	if (!file)
-		return -EBADF;
-
-	ret = -EINVAL;
-	if (file->f_op->ioctl != tty_ioctl)
-		goto out;
-	real_tty = (struct tty_struct *)file->private_data;
-	if (!real_tty) 	
-		goto out;
-
-	ret = put_user(new_encode_dev(tty_devnum(real_tty)), ptr); 
-
-out:
-	fput_light(file, fput_needed);
-	return ret;
-} 
-
 #define RTC_IRQP_READ32	_IOR('p', 0x0b, unsigned int)	 /* Read IRQ rate   */
 #define RTC_IRQP_SET32	_IOW('p', 0x0c, unsigned int)	 /* Set IRQ rate    */
 #define RTC_EPOCH_READ32	_IOR('p', 0x0d, unsigned)	 /* Read epoch      */
@@ -85,90 +56,6 @@ static int rtc32_ioctl(unsigned fd, unsigned cmd, unsigned long arg)
 	return sys_ioctl(fd,cmd,arg); 
 } 
 
-/* /proc/mtrr ioctls */
-
-
-struct mtrr_sentry32
-{
-    compat_ulong_t base;    /*  Base address     */
-    compat_uint_t size;    /*  Size of region   */
-    compat_uint_t type;     /*  Type of region   */
-};
-
-struct mtrr_gentry32
-{
-    compat_ulong_t regnum;   /*  Register number  */
-    compat_uint_t base;    /*  Base address     */
-    compat_uint_t size;    /*  Size of region   */
-    compat_uint_t type;     /*  Type of region   */
-};
-
-#define	MTRR_IOCTL_BASE	'M'
-
-#define MTRRIOC32_ADD_ENTRY        _IOW(MTRR_IOCTL_BASE,  0, struct mtrr_sentry32)
-#define MTRRIOC32_SET_ENTRY        _IOW(MTRR_IOCTL_BASE,  1, struct mtrr_sentry32)
-#define MTRRIOC32_DEL_ENTRY        _IOW(MTRR_IOCTL_BASE,  2, struct mtrr_sentry32)
-#define MTRRIOC32_GET_ENTRY        _IOWR(MTRR_IOCTL_BASE, 3, struct mtrr_gentry32)
-#define MTRRIOC32_KILL_ENTRY       _IOW(MTRR_IOCTL_BASE,  4, struct mtrr_sentry32)
-#define MTRRIOC32_ADD_PAGE_ENTRY   _IOW(MTRR_IOCTL_BASE,  5, struct mtrr_sentry32)
-#define MTRRIOC32_SET_PAGE_ENTRY   _IOW(MTRR_IOCTL_BASE,  6, struct mtrr_sentry32)
-#define MTRRIOC32_DEL_PAGE_ENTRY   _IOW(MTRR_IOCTL_BASE,  7, struct mtrr_sentry32)
-#define MTRRIOC32_GET_PAGE_ENTRY   _IOWR(MTRR_IOCTL_BASE, 8, struct mtrr_gentry32)
-#define MTRRIOC32_KILL_PAGE_ENTRY  _IOW(MTRR_IOCTL_BASE,  9, struct mtrr_sentry32)
-
-
-static int mtrr_ioctl32(unsigned int fd, unsigned int cmd, unsigned long arg)
-{ 
-	struct mtrr_gentry g;
-	struct mtrr_sentry s;
-	int get = 0, err = 0; 
-	struct mtrr_gentry32 __user *g32 = (struct mtrr_gentry32 __user *)arg; 
-	mm_segment_t oldfs = get_fs(); 
-
-	switch (cmd) { 
-#define SET(x) case MTRRIOC32_ ## x ## _ENTRY: cmd = MTRRIOC_ ## x ## _ENTRY; break 
-#define GET(x) case MTRRIOC32_ ## x ## _ENTRY: cmd = MTRRIOC_ ## x ## _ENTRY; get=1; break
-		SET(ADD);
-		SET(SET); 
-		SET(DEL);
-		GET(GET); 
-		SET(KILL);
-		SET(ADD_PAGE); 
-		SET(SET_PAGE); 
-		SET(DEL_PAGE); 
-		GET(GET_PAGE); 
-		SET(KILL_PAGE); 
-	} 
-	
-	if (get) { 
-		err = get_user(g.regnum, &g32->regnum);
-		err |= get_user(g.base, &g32->base);
-		err |= get_user(g.size, &g32->size);
-		err |= get_user(g.type, &g32->type); 
-
-		arg = (unsigned long)&g; 
-	} else { 
-		struct mtrr_sentry32 __user *s32 = (struct mtrr_sentry32 __user *)arg;
-		err = get_user(s.base, &s32->base);
-		err |= get_user(s.size, &s32->size);
-		err |= get_user(s.type, &s32->type);
-
-		arg = (unsigned long)&s; 
-	} 
-	if (err) return err;
-	
-	set_fs(KERNEL_DS); 
-	err = sys_ioctl(fd, cmd, arg); 
-	set_fs(oldfs); 
-		
-	if (!err && get) { 
-		err = put_user(g.base, &g32->base);
-		err |= put_user(g.size, &g32->size);
-		err |= put_user(g.regnum, &g32->regnum);
-		err |= put_user(g.type, &g32->type); 
-	} 
-	return err;
-} 
 
 #define HANDLE_IOCTL(cmd,handler) { (cmd), (ioctl_trans_handler_t)(handler) }, 
 #define COMPATIBLE_IOCTL(cmd) HANDLE_IOCTL(cmd,sys_ioctl)
@@ -177,15 +64,8 @@ struct ioctl_trans ioctl_start[] = {
 #include <linux/compat_ioctl.h>
 #define DECLARES
 #include "compat_ioctl.c"
-COMPATIBLE_IOCTL(HDIO_SET_KEEPSETTINGS)
-COMPATIBLE_IOCTL(HDIO_SCAN_HWIF)
-COMPATIBLE_IOCTL(BLKRASET)
-COMPATIBLE_IOCTL(0x4B50)   /* KDGHWCLK - not in the kernel, but don't complain */
-COMPATIBLE_IOCTL(0x4B51)   /* KDSHWCLK - not in the kernel, but don't complain */
-COMPATIBLE_IOCTL(FIOQSIZE)
 
 /* And these ioctls need translation */
-HANDLE_IOCTL(TIOCGDEV, tiocgdev)
 /* realtime device */
 HANDLE_IOCTL(RTC_IRQP_READ,  rtc32_ioctl)
 HANDLE_IOCTL(RTC_IRQP_READ32,rtc32_ioctl)
@@ -193,17 +73,6 @@ HANDLE_IOCTL(RTC_IRQP_SET32, rtc32_ioctl)
 HANDLE_IOCTL(RTC_EPOCH_READ32, rtc32_ioctl)
 HANDLE_IOCTL(RTC_EPOCH_SET32, rtc32_ioctl)
 /* take care of sizeof(sizeof()) breakage */
-/* mtrr */
-HANDLE_IOCTL(MTRRIOC32_ADD_ENTRY, mtrr_ioctl32)
-HANDLE_IOCTL(MTRRIOC32_SET_ENTRY, mtrr_ioctl32)
-HANDLE_IOCTL(MTRRIOC32_DEL_ENTRY, mtrr_ioctl32)
-HANDLE_IOCTL(MTRRIOC32_GET_ENTRY, mtrr_ioctl32)
-HANDLE_IOCTL(MTRRIOC32_KILL_ENTRY, mtrr_ioctl32)
-HANDLE_IOCTL(MTRRIOC32_ADD_PAGE_ENTRY, mtrr_ioctl32)
-HANDLE_IOCTL(MTRRIOC32_SET_PAGE_ENTRY, mtrr_ioctl32)
-HANDLE_IOCTL(MTRRIOC32_DEL_PAGE_ENTRY, mtrr_ioctl32)
-HANDLE_IOCTL(MTRRIOC32_GET_PAGE_ENTRY, mtrr_ioctl32)
-HANDLE_IOCTL(MTRRIOC32_KILL_PAGE_ENTRY, mtrr_ioctl32)
 }; 
 
 int ioctl_table_size = ARRAY_SIZE(ioctl_start);
diff --git a/arch/x86_64/ia32/ia32_signal.c b/arch/x86_64/ia32/ia32_signal.c
index 66e2821533db..0903cc1faef2 100644
--- a/arch/x86_64/ia32/ia32_signal.c
+++ b/arch/x86_64/ia32/ia32_signal.c
@@ -425,7 +425,11 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
 		rsp = (unsigned long) ka->sa.sa_restorer;
 	}
 
-	return (void __user *)((rsp - frame_size) & -8UL);
+	rsp -= frame_size;
+	/* Align the stack pointer according to the i386 ABI,
+	 * i.e. so that on function entry ((sp + 4) & 15) == 0. */
+	rsp = ((rsp + 4) & -16ul) - 4;
+	return (void __user *) rsp;
 }
 
 int ia32_setup_frame(int sig, struct k_sigaction *ka,
diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile
index bcdd0a805fe7..fe4cbd1c4b2f 100644
--- a/arch/x86_64/kernel/Makefile
+++ b/arch/x86_64/kernel/Makefile
@@ -11,6 +11,7 @@ obj-y	:= process.o signal.o entry.o traps.o irq.o \
 
 obj-$(CONFIG_X86_MCE)         += mce.o
 obj-$(CONFIG_X86_MCE_INTEL)	+= mce_intel.o
+obj-$(CONFIG_X86_MCE_AMD)	+= mce_amd.o
 obj-$(CONFIG_MTRR)		+= ../../i386/kernel/cpu/mtrr/
 obj-$(CONFIG_ACPI)		+= acpi/
 obj-$(CONFIG_X86_MSR)		+= msr.o
@@ -27,7 +28,6 @@ obj-$(CONFIG_CPU_FREQ)		+= cpufreq/
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 obj-$(CONFIG_GART_IOMMU)	+= pci-gart.o aperture.o
 obj-$(CONFIG_DUMMY_IOMMU)	+= pci-nommu.o pci-dma.o
-obj-$(CONFIG_SWIOTLB)		+= swiotlb.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
 obj-$(CONFIG_X86_PM_TIMER)	+= pmtimer.o
 
@@ -41,7 +41,6 @@ CFLAGS_vsyscall.o		:= $(PROFILING) -g0
 bootflag-y			+= ../../i386/kernel/bootflag.o
 cpuid-$(subst m,y,$(CONFIG_X86_CPUID))  += ../../i386/kernel/cpuid.o
 topology-y                     += ../../i386/mach-default/topology.o
-swiotlb-$(CONFIG_SWIOTLB)      += ../../ia64/lib/swiotlb.o
 microcode-$(subst m,y,$(CONFIG_MICROCODE))  += ../../i386/kernel/microcode.o
 intel_cacheinfo-y		+= ../../i386/kernel/cpu/intel_cacheinfo.o
 quirks-y			+= ../../i386/kernel/quirks.o
diff --git a/arch/x86_64/kernel/aperture.c b/arch/x86_64/kernel/aperture.c
index 962ad4823b6a..c7f4fdd20f05 100644
--- a/arch/x86_64/kernel/aperture.c
+++ b/arch/x86_64/kernel/aperture.c
@@ -196,7 +196,7 @@ static __u32 __init search_agp_bridge(u32 *order, int *valid_agp)
 void __init iommu_hole_init(void) 
 { 
 	int fix, num; 
-	u32 aper_size, aper_alloc = 0, aper_order, last_aper_order = 0;
+	u32 aper_size, aper_alloc = 0, aper_order = 0, last_aper_order = 0;
 	u64 aper_base, last_aper_base = 0;
 	int valid_agp = 0;
 
diff --git a/arch/x86_64/kernel/apic.c b/arch/x86_64/kernel/apic.c
index b6e7715d877f..18691ce4c759 100644
--- a/arch/x86_64/kernel/apic.c
+++ b/arch/x86_64/kernel/apic.c
@@ -833,6 +833,16 @@ int setup_profiling_timer(unsigned int multiplier)
 	return 0;
 }
 
+#ifdef CONFIG_X86_MCE_AMD
+void setup_threshold_lvt(unsigned long lvt_off)
+{
+	unsigned int v = 0;
+	unsigned long reg = (lvt_off << 4) + 0x500;
+	v |= THRESHOLD_APIC_VECTOR;
+	apic_write(reg, v);
+}
+#endif /* CONFIG_X86_MCE_AMD */
+
 #undef APIC_DIVISOR
 
 /*
diff --git a/arch/x86_64/kernel/e820.c b/arch/x86_64/kernel/e820.c
index ab3f87aaff70..17579a1a174b 100644
--- a/arch/x86_64/kernel/e820.c
+++ b/arch/x86_64/kernel/e820.c
@@ -23,8 +23,7 @@
 #include <asm/e820.h>
 #include <asm/proto.h>
 #include <asm/bootsetup.h>
-
-extern char _end[];
+#include <asm/sections.h>
 
 /* 
  * PFN of last memory page.
diff --git a/arch/x86_64/kernel/entry.S b/arch/x86_64/kernel/entry.S
index 7937971d1853..9ff42041bb6b 100644
--- a/arch/x86_64/kernel/entry.S
+++ b/arch/x86_64/kernel/entry.S
@@ -612,6 +612,9 @@ retint_kernel:
 ENTRY(thermal_interrupt)
 	apicinterrupt THERMAL_APIC_VECTOR,smp_thermal_interrupt
 
+ENTRY(threshold_interrupt)
+	apicinterrupt THRESHOLD_APIC_VECTOR,mce_threshold_interrupt
+
 #ifdef CONFIG_SMP	
 ENTRY(reschedule_interrupt)
 	apicinterrupt RESCHEDULE_VECTOR,smp_reschedule_interrupt
diff --git a/arch/x86_64/kernel/head.S b/arch/x86_64/kernel/head.S
index 4592bf21fcaf..15290968e49d 100644
--- a/arch/x86_64/kernel/head.S
+++ b/arch/x86_64/kernel/head.S
@@ -12,6 +12,7 @@
 
 #include <linux/linkage.h>
 #include <linux/threads.h>
+#include <linux/init.h>
 #include <asm/desc.h>
 #include <asm/segment.h>
 #include <asm/page.h>
@@ -70,7 +71,7 @@ startup_32:
 	movl	%eax, %cr4
 
 	/* Setup early boot stage 4 level pagetables */
-	movl	$(init_level4_pgt - __START_KERNEL_map), %eax
+	movl	$(boot_level4_pgt - __START_KERNEL_map), %eax
 	movl	%eax, %cr3
 
 	/* Setup EFER (Extended Feature Enable Register) */
@@ -113,7 +114,7 @@ startup_64:
 	movq	%rax, %cr4
 
 	/* Setup early boot stage 4 level pagetables. */
-	movq	$(init_level4_pgt - __START_KERNEL_map), %rax
+	movq	$(boot_level4_pgt - __START_KERNEL_map), %rax
 	movq	%rax, %cr3
 
 	/* Check if nx is implemented */
@@ -240,20 +241,10 @@ ljumpvector:
 ENTRY(stext)
 ENTRY(_stext)
 
-	/*
-	 * This default setting generates an ident mapping at address 0x100000
-	 * and a mapping for the kernel that precisely maps virtual address
-	 * 0xffffffff80000000 to physical address 0x000000. (always using
-	 * 2Mbyte large pages provided by PAE mode)
-	 */
 .org 0x1000
 ENTRY(init_level4_pgt)
-	.quad	0x0000000000002007 + __PHYSICAL_START	/* -> level3_ident_pgt */
-	.fill	255,8,0
-	.quad	0x000000000000a007 + __PHYSICAL_START
-	.fill	254,8,0
-	/* (2^48-(2*1024*1024*1024))/(2^39) = 511 */
-	.quad	0x0000000000003007 + __PHYSICAL_START	/* -> level3_kernel_pgt */
+	/* This gets initialized in x86_64_start_kernel */
+	.fill	512,8,0
 
 .org 0x2000
 ENTRY(level3_ident_pgt)
@@ -270,26 +261,26 @@ ENTRY(level3_kernel_pgt)
 .org 0x4000
 ENTRY(level2_ident_pgt)
 	/* 40MB for bootup. 	*/
-	.quad	0x0000000000000183
-	.quad	0x0000000000200183
-	.quad	0x0000000000400183
-	.quad	0x0000000000600183
-	.quad	0x0000000000800183
-	.quad	0x0000000000A00183
-	.quad	0x0000000000C00183
-	.quad	0x0000000000E00183
-	.quad	0x0000000001000183
-	.quad	0x0000000001200183
-	.quad	0x0000000001400183
-	.quad	0x0000000001600183
-	.quad	0x0000000001800183
-	.quad	0x0000000001A00183
-	.quad	0x0000000001C00183
-	.quad	0x0000000001E00183
-	.quad	0x0000000002000183
-	.quad	0x0000000002200183
-	.quad	0x0000000002400183
-	.quad	0x0000000002600183
+	.quad	0x0000000000000083
+	.quad	0x0000000000200083
+	.quad	0x0000000000400083
+	.quad	0x0000000000600083
+	.quad	0x0000000000800083
+	.quad	0x0000000000A00083
+	.quad	0x0000000000C00083
+	.quad	0x0000000000E00083
+	.quad	0x0000000001000083
+	.quad	0x0000000001200083
+	.quad	0x0000000001400083
+	.quad	0x0000000001600083
+	.quad	0x0000000001800083
+	.quad	0x0000000001A00083
+	.quad	0x0000000001C00083
+	.quad	0x0000000001E00083
+	.quad	0x0000000002000083
+	.quad	0x0000000002200083
+	.quad	0x0000000002400083
+	.quad	0x0000000002600083
 	/* Temporary mappings for the super early allocator in arch/x86_64/mm/init.c */
 	.globl temp_boot_pmds
 temp_boot_pmds:
@@ -350,6 +341,24 @@ ENTRY(wakeup_level4_pgt)
 	.quad	0x0000000000003007 + __PHYSICAL_START	/* -> level3_kernel_pgt */
 #endif
 
+#ifndef CONFIG_HOTPLUG_CPU
+	__INITDATA
+#endif
+	/*
+	 * This default setting generates an ident mapping at address 0x100000
+	 * and a mapping for the kernel that precisely maps virtual address
+	 * 0xffffffff80000000 to physical address 0x000000. (always using
+	 * 2Mbyte large pages provided by PAE mode)
+	 */
+	.align PAGE_SIZE
+ENTRY(boot_level4_pgt)
+	.quad	0x0000000000002007 + __PHYSICAL_START	/* -> level3_ident_pgt */
+	.fill	255,8,0
+	.quad	0x000000000000a007 + __PHYSICAL_START
+	.fill	254,8,0
+	/* (2^48-(2*1024*1024*1024))/(2^39) = 511 */
+	.quad	0x0000000000003007 + __PHYSICAL_START	/* -> level3_kernel_pgt */
+
 	.data
 
 	.align 16
diff --git a/arch/x86_64/kernel/head64.c b/arch/x86_64/kernel/head64.c
index cf6ab147a2a5..b675c5add01e 100644
--- a/arch/x86_64/kernel/head64.c
+++ b/arch/x86_64/kernel/head64.c
@@ -19,14 +19,15 @@
 #include <asm/bootsetup.h>
 #include <asm/setup.h>
 #include <asm/desc.h>
+#include <asm/pgtable.h>
+#include <asm/sections.h>
 
 /* Don't add a printk in there. printk relies on the PDA which is not initialized 
    yet. */
 static void __init clear_bss(void)
 {
-	extern char __bss_start[], __bss_end[];
 	memset(__bss_start, 0,
-	       (unsigned long) __bss_end - (unsigned long) __bss_start);
+	       (unsigned long) __bss_stop - (unsigned long) __bss_start);
 }
 
 #define NEW_CL_POINTER		0x228	/* Relative to real mode data */
@@ -75,8 +76,6 @@ static void __init setup_boot_cpu_data(void)
 	boot_cpu_data.x86_mask = eax & 0xf;
 }
 
-extern char _end[];
-
 void __init x86_64_start_kernel(char * real_mode_data)
 {
 	char *s;
@@ -86,6 +85,13 @@ void __init x86_64_start_kernel(char * real_mode_data)
 		set_intr_gate(i, early_idt_handler);
 	asm volatile("lidt %0" :: "m" (idt_descr));
 	clear_bss();
+
+	/*
+	 * switch to init_level4_pgt from boot_level4_pgt
+	 */
+	memcpy(init_level4_pgt, boot_level4_pgt, PTRS_PER_PGD*sizeof(pgd_t));
+	asm volatile("movq %0,%%cr3" :: "r" (__pa_symbol(&init_level4_pgt)));
+
 	pda_init(0);
 	copy_bootdata(real_mode_data);
 #ifdef CONFIG_SMP
diff --git a/arch/x86_64/kernel/i8259.c b/arch/x86_64/kernel/i8259.c
index b2a238b5a17e..6e5101ad3d1a 100644
--- a/arch/x86_64/kernel/i8259.c
+++ b/arch/x86_64/kernel/i8259.c
@@ -492,9 +492,10 @@ void invalidate_interrupt5(void);
 void invalidate_interrupt6(void);
 void invalidate_interrupt7(void);
 void thermal_interrupt(void);
+void threshold_interrupt(void);
 void i8254_timer_resume(void);
 
-static void setup_timer(void)
+static void setup_timer_hardware(void)
 {
 	outb_p(0x34,0x43);		/* binary, mode 2, LSB/MSB, ch 0 */
 	udelay(10);
@@ -505,17 +506,17 @@ static void setup_timer(void)
 
 static int timer_resume(struct sys_device *dev)
 {
-	setup_timer();
+	setup_timer_hardware();
 	return 0;
 }
 
 void i8254_timer_resume(void)
 {
-	setup_timer();
+	setup_timer_hardware();
 }
 
 static struct sysdev_class timer_sysclass = {
-	set_kset_name("timer"),
+	set_kset_name("timer_pit"),
 	.resume		= timer_resume,
 };
 
@@ -580,6 +581,7 @@ void __init init_IRQ(void)
 	set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
 #endif	
 	set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
+	set_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
 
 #ifdef CONFIG_X86_LOCAL_APIC
 	/* self generated IPI for local APIC timer */
@@ -594,7 +596,7 @@ void __init init_IRQ(void)
 	 * Set the clock to HZ Hz, we already have a valid
 	 * vector now:
 	 */
-	setup_timer();
+	setup_timer_hardware();
 
 	if (!acpi_ioapic)
 		setup_irq(2, &irq2);
diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c
index c8eee20cd519..97154ab058b4 100644
--- a/arch/x86_64/kernel/io_apic.c
+++ b/arch/x86_64/kernel/io_apic.c
@@ -57,7 +57,7 @@ int nr_ioapic_registers[MAX_IO_APICS];
  * Rough estimation of how many shared IRQs there are, can
  * be changed anytime.
  */
-#define MAX_PLUS_SHARED_IRQS NR_IRQS
+#define MAX_PLUS_SHARED_IRQS NR_IRQ_VECTORS
 #define PIN_MAP_SIZE (MAX_PLUS_SHARED_IRQS + NR_IRQS)
 
 /*
@@ -85,6 +85,7 @@ int vector_irq[NR_VECTORS] __read_mostly = { [0 ... NR_VECTORS - 1] = -1};
 	int pin;							\
 	struct irq_pin_list *entry = irq_2_pin + irq;			\
 									\
+	BUG_ON(irq >= NR_IRQS);						\
 	for (;;) {							\
 		unsigned int reg;					\
 		pin = entry->pin;					\
@@ -127,6 +128,8 @@ static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t mask)
 }
 #endif
 
+static u8 gsi_2_irq[NR_IRQ_VECTORS] = { [0 ... NR_IRQ_VECTORS-1] = 0xFF };
+
 /*
  * The common case is 1:1 IRQ<->pin mappings. Sometimes there are
  * shared ISA-space IRQs, so we have to support them. We are super
@@ -137,6 +140,7 @@ static void add_pin_to_irq(unsigned int irq, int apic, int pin)
 	static int first_free_entry = NR_IRQS;
 	struct irq_pin_list *entry = irq_2_pin + irq;
 
+	BUG_ON(irq >= NR_IRQS);
 	while (entry->next)
 		entry = irq_2_pin + entry->next;
 
@@ -144,7 +148,7 @@ static void add_pin_to_irq(unsigned int irq, int apic, int pin)
 		entry->next = first_free_entry;
 		entry = irq_2_pin + entry->next;
 		if (++first_free_entry >= PIN_MAP_SIZE)
-			panic("io_apic.c: whoops");
+			panic("io_apic.c: ran out of irq_2_pin entries!");
 	}
 	entry->apic = apic;
 	entry->pin = pin;
@@ -420,6 +424,7 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
 				best_guess = irq;
 		}
 	}
+	BUG_ON(best_guess >= NR_IRQS);
 	return best_guess;
 }
 
@@ -610,6 +615,64 @@ static inline int irq_trigger(int idx)
 	return MPBIOS_trigger(idx);
 }
 
+static int next_irq = 16;
+
+/*
+ * gsi_irq_sharing -- Name overload!  "irq" can be either a legacy IRQ
+ * in the range 0-15, a linux IRQ in the range 0-223, or a GSI number
+ * from ACPI, which can reach 800 in large boxen.
+ *
+ * Compact the sparse GSI space into a sequential IRQ series and reuse
+ * vectors if possible.
+ */
+int gsi_irq_sharing(int gsi)
+{
+	int i, tries, vector;
+
+	BUG_ON(gsi >= NR_IRQ_VECTORS);
+
+	if (platform_legacy_irq(gsi))
+		return gsi;
+
+	if (gsi_2_irq[gsi] != 0xFF)
+		return (int)gsi_2_irq[gsi];
+
+	tries = NR_IRQS;
+  try_again:
+	vector = assign_irq_vector(gsi);
+
+	/*
+	 * Sharing vectors means sharing IRQs, so scan irq_vectors for previous
+	 * use of vector and if found, return that IRQ.  However, we never want
+	 * to share legacy IRQs, which usually have a different trigger mode
+	 * than PCI.
+	 */
+	for (i = 0; i < NR_IRQS; i++)
+		if (IO_APIC_VECTOR(i) == vector)
+			break;
+	if (platform_legacy_irq(i)) {
+		if (--tries >= 0) {
+			IO_APIC_VECTOR(i) = 0;
+			goto try_again;
+		}
+		panic("gsi_irq_sharing: didn't find an IRQ using vector 0x%02X for GSI %d", vector, gsi);
+	}
+	if (i < NR_IRQS) {
+		gsi_2_irq[gsi] = i;
+		printk(KERN_INFO "GSI %d sharing vector 0x%02X and IRQ %d\n",
+				gsi, vector, i);
+		return i;
+	}
+
+	i = next_irq++;
+	BUG_ON(i >= NR_IRQS);
+	gsi_2_irq[gsi] = i;
+	IO_APIC_VECTOR(i) = vector;
+	printk(KERN_INFO "GSI %d assigned vector 0x%02X and IRQ %d\n",
+			gsi, vector, i);
+	return i;
+}
+
 static int pin_2_irq(int idx, int apic, int pin)
 {
 	int irq, i;
@@ -639,6 +702,7 @@ static int pin_2_irq(int idx, int apic, int pin)
 			while (i < apic)
 				irq += nr_ioapic_registers[i++];
 			irq += pin;
+			irq = gsi_irq_sharing(irq);
 			break;
 		}
 		default:
@@ -648,6 +712,7 @@ static int pin_2_irq(int idx, int apic, int pin)
 			break;
 		}
 	}
+	BUG_ON(irq >= NR_IRQS);
 
 	/*
 	 * PCI IRQ command line redirection. Yes, limits are hardcoded.
@@ -663,6 +728,7 @@ static int pin_2_irq(int idx, int apic, int pin)
 			}
 		}
 	}
+	BUG_ON(irq >= NR_IRQS);
 	return irq;
 }
 
@@ -690,8 +756,8 @@ int assign_irq_vector(int irq)
 {
 	static int current_vector = FIRST_DEVICE_VECTOR, offset = 0;
 
-	BUG_ON(irq >= NR_IRQ_VECTORS);
-	if (IO_APIC_VECTOR(irq) > 0)
+	BUG_ON(irq != AUTO_ASSIGN && (unsigned)irq >= NR_IRQ_VECTORS);
+	if (irq != AUTO_ASSIGN && IO_APIC_VECTOR(irq) > 0)
 		return IO_APIC_VECTOR(irq);
 next:
 	current_vector += 8;
@@ -699,9 +765,8 @@ next:
 		goto next;
 
 	if (current_vector >= FIRST_SYSTEM_VECTOR) {
-		offset++;
-		if (!(offset%8))
-			return -ENOSPC;
+		/* If we run out of vectors on large boxen, must share them. */
+		offset = (offset + 1) % 8;
 		current_vector = FIRST_DEVICE_VECTOR + offset;
 	}
 
@@ -1917,6 +1982,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a
 	entry.polarity = active_high_low;
 	entry.mask = 1;					 /* Disabled (masked) */
 
+	irq = gsi_irq_sharing(irq);
 	/*
 	 * IRQs < 16 are already in the irq_2_pin[] map
 	 */
diff --git a/arch/x86_64/kernel/kprobes.c b/arch/x86_64/kernel/kprobes.c
index df08c43276a0..dddeb678b440 100644
--- a/arch/x86_64/kernel/kprobes.c
+++ b/arch/x86_64/kernel/kprobes.c
@@ -34,7 +34,6 @@
 #include <linux/config.h>
 #include <linux/kprobes.h>
 #include <linux/ptrace.h>
-#include <linux/spinlock.h>
 #include <linux/string.h>
 #include <linux/slab.h>
 #include <linux/preempt.h>
@@ -44,17 +43,10 @@
 #include <asm/kdebug.h>
 
 static DECLARE_MUTEX(kprobe_mutex);
-
-static struct kprobe *current_kprobe;
-static unsigned long kprobe_status, kprobe_old_rflags, kprobe_saved_rflags;
-static struct kprobe *kprobe_prev;
-static unsigned long kprobe_status_prev, kprobe_old_rflags_prev, kprobe_saved_rflags_prev;
-static struct pt_regs jprobe_saved_regs;
-static long *jprobe_saved_rsp;
 void jprobe_return_end(void);
 
-/* copy of the kernel stack at the probe fire time */
-static kprobe_opcode_t jprobes_stack[MAX_STACK_SIZE];
+DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
+DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
 
 /*
  * returns non-zero if opcode modifies the interrupt flag.
@@ -77,9 +69,9 @@ static inline int is_IF_modifier(kprobe_opcode_t *insn)
 int __kprobes arch_prepare_kprobe(struct kprobe *p)
 {
 	/* insn: must be on special executable page on x86_64. */
-	up(&kprobe_mutex);
-	p->ainsn.insn = get_insn_slot();
 	down(&kprobe_mutex);
+	p->ainsn.insn = get_insn_slot();
+	up(&kprobe_mutex);
 	if (!p->ainsn.insn) {
 		return -ENOMEM;
 	}
@@ -231,34 +223,35 @@ void __kprobes arch_disarm_kprobe(struct kprobe *p)
 
 void __kprobes arch_remove_kprobe(struct kprobe *p)
 {
-	up(&kprobe_mutex);
-	free_insn_slot(p->ainsn.insn);
 	down(&kprobe_mutex);
+	free_insn_slot(p->ainsn.insn);
+	up(&kprobe_mutex);
 }
 
-static inline void save_previous_kprobe(void)
+static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb)
 {
-	kprobe_prev = current_kprobe;
-	kprobe_status_prev = kprobe_status;
-	kprobe_old_rflags_prev = kprobe_old_rflags;
-	kprobe_saved_rflags_prev = kprobe_saved_rflags;
+	kcb->prev_kprobe.kp = kprobe_running();
+	kcb->prev_kprobe.status = kcb->kprobe_status;
+	kcb->prev_kprobe.old_rflags = kcb->kprobe_old_rflags;
+	kcb->prev_kprobe.saved_rflags = kcb->kprobe_saved_rflags;
 }
 
-static inline void restore_previous_kprobe(void)
+static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb)
 {
-	current_kprobe = kprobe_prev;
-	kprobe_status = kprobe_status_prev;
-	kprobe_old_rflags = kprobe_old_rflags_prev;
-	kprobe_saved_rflags = kprobe_saved_rflags_prev;
+	__get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp;
+	kcb->kprobe_status = kcb->prev_kprobe.status;
+	kcb->kprobe_old_rflags = kcb->prev_kprobe.old_rflags;
+	kcb->kprobe_saved_rflags = kcb->prev_kprobe.saved_rflags;
 }
 
-static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs)
+static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
+				struct kprobe_ctlblk *kcb)
 {
-	current_kprobe = p;
-	kprobe_saved_rflags = kprobe_old_rflags
+	__get_cpu_var(current_kprobe) = p;
+	kcb->kprobe_saved_rflags = kcb->kprobe_old_rflags
 		= (regs->eflags & (TF_MASK | IF_MASK));
 	if (is_IF_modifier(p->ainsn.insn))
-		kprobe_saved_rflags &= ~IF_MASK;
+		kcb->kprobe_saved_rflags &= ~IF_MASK;
 }
 
 static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
@@ -272,6 +265,7 @@ static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
 		regs->rip = (unsigned long)p->ainsn.insn;
 }
 
+/* Called with kretprobe_lock held */
 void __kprobes arch_prepare_kretprobe(struct kretprobe *rp,
 				      struct pt_regs *regs)
 {
@@ -292,32 +286,30 @@ void __kprobes arch_prepare_kretprobe(struct kretprobe *rp,
         }
 }
 
-/*
- * Interrupts are disabled on entry as trap3 is an interrupt gate and they
- * remain disabled thorough out this function.
- */
 int __kprobes kprobe_handler(struct pt_regs *regs)
 {
 	struct kprobe *p;
 	int ret = 0;
 	kprobe_opcode_t *addr = (kprobe_opcode_t *)(regs->rip - sizeof(kprobe_opcode_t));
+	struct kprobe_ctlblk *kcb;
 
-	/* We're in an interrupt, but this is clear and BUG()-safe. */
+	/*
+	 * We don't want to be preempted for the entire
+	 * duration of kprobe processing
+	 */
 	preempt_disable();
+	kcb = get_kprobe_ctlblk();
 
 	/* Check we're not actually recursing */
 	if (kprobe_running()) {
-		/* We *are* holding lock here, so this is safe.
-		   Disarm the probe we just hit, and ignore it. */
 		p = get_kprobe(addr);
 		if (p) {
-			if (kprobe_status == KPROBE_HIT_SS &&
+			if (kcb->kprobe_status == KPROBE_HIT_SS &&
 				*p->ainsn.insn == BREAKPOINT_INSTRUCTION) {
 				regs->eflags &= ~TF_MASK;
-				regs->eflags |= kprobe_saved_rflags;
-				unlock_kprobes();
+				regs->eflags |= kcb->kprobe_saved_rflags;
 				goto no_kprobe;
-			} else if (kprobe_status == KPROBE_HIT_SSDONE) {
+			} else if (kcb->kprobe_status == KPROBE_HIT_SSDONE) {
 				/* TODO: Provide re-entrancy from
 				 * post_kprobes_handler() and avoid exception
 				 * stack corruption while single-stepping on
@@ -325,6 +317,7 @@ int __kprobes kprobe_handler(struct pt_regs *regs)
 				 */
 				arch_disarm_kprobe(p);
 				regs->rip = (unsigned long)p->addr;
+				reset_current_kprobe();
 				ret = 1;
 			} else {
 				/* We have reentered the kprobe_handler(), since
@@ -334,27 +327,24 @@ int __kprobes kprobe_handler(struct pt_regs *regs)
 				 * of the new probe without calling any user
 				 * handlers.
 				 */
-				save_previous_kprobe();
-				set_current_kprobe(p, regs);
+				save_previous_kprobe(kcb);
+				set_current_kprobe(p, regs, kcb);
 				p->nmissed++;
 				prepare_singlestep(p, regs);
-				kprobe_status = KPROBE_REENTER;
+				kcb->kprobe_status = KPROBE_REENTER;
 				return 1;
 			}
 		} else {
-			p = current_kprobe;
+			p = __get_cpu_var(current_kprobe);
 			if (p->break_handler && p->break_handler(p, regs)) {
 				goto ss_probe;
 			}
 		}
-		/* If it's not ours, can't be delete race, (we hold lock). */
 		goto no_kprobe;
 	}
 
-	lock_kprobes();
 	p = get_kprobe(addr);
 	if (!p) {
-		unlock_kprobes();
 		if (*addr != BREAKPOINT_INSTRUCTION) {
 			/*
 			 * The breakpoint instruction was removed right
@@ -372,8 +362,8 @@ int __kprobes kprobe_handler(struct pt_regs *regs)
 		goto no_kprobe;
 	}
 
-	kprobe_status = KPROBE_HIT_ACTIVE;
-	set_current_kprobe(p, regs);
+	set_current_kprobe(p, regs, kcb);
+	kcb->kprobe_status = KPROBE_HIT_ACTIVE;
 
 	if (p->pre_handler && p->pre_handler(p, regs))
 		/* handler has already set things up, so skip ss setup */
@@ -381,7 +371,7 @@ int __kprobes kprobe_handler(struct pt_regs *regs)
 
 ss_probe:
 	prepare_singlestep(p, regs);
-	kprobe_status = KPROBE_HIT_SS;
+	kcb->kprobe_status = KPROBE_HIT_SS;
 	return 1;
 
 no_kprobe:
@@ -409,9 +399,10 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
         struct kretprobe_instance *ri = NULL;
         struct hlist_head *head;
         struct hlist_node *node, *tmp;
-	unsigned long orig_ret_address = 0;
+	unsigned long flags, orig_ret_address = 0;
 	unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline;
 
+	spin_lock_irqsave(&kretprobe_lock, flags);
         head = kretprobe_inst_table_head(current);
 
 	/*
@@ -450,13 +441,14 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 	BUG_ON(!orig_ret_address || (orig_ret_address == trampoline_address));
 	regs->rip = orig_ret_address;
 
-	unlock_kprobes();
+	reset_current_kprobe();
+	spin_unlock_irqrestore(&kretprobe_lock, flags);
 	preempt_enable_no_resched();
 
         /*
          * By returning a non-zero value, we are telling
-         * kprobe_handler() that we have handled unlocking
-         * and re-enabling preemption.
+         * kprobe_handler() that we don't want the post_handler
+	 * to run (and have re-enabled preemption)
          */
         return 1;
 }
@@ -483,7 +475,8 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
  * that is atop the stack is the address following the copied instruction.
  * We need to make it the address following the original instruction.
  */
-static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs)
+static void __kprobes resume_execution(struct kprobe *p,
+		struct pt_regs *regs, struct kprobe_ctlblk *kcb)
 {
 	unsigned long *tos = (unsigned long *)regs->rsp;
 	unsigned long next_rip = 0;
@@ -498,7 +491,7 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs)
 	switch (*insn) {
 	case 0x9c:		/* pushfl */
 		*tos &= ~(TF_MASK | IF_MASK);
-		*tos |= kprobe_old_rflags;
+		*tos |= kcb->kprobe_old_rflags;
 		break;
 	case 0xc3:		/* ret/lret */
 	case 0xcb:
@@ -537,30 +530,28 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs)
 	}
 }
 
-/*
- * Interrupts are disabled on entry as trap1 is an interrupt gate and they
- * remain disabled thoroughout this function.  And we hold kprobe lock.
- */
 int __kprobes post_kprobe_handler(struct pt_regs *regs)
 {
-	if (!kprobe_running())
+	struct kprobe *cur = kprobe_running();
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	if (!cur)
 		return 0;
 
-	if ((kprobe_status != KPROBE_REENTER) && current_kprobe->post_handler) {
-		kprobe_status = KPROBE_HIT_SSDONE;
-		current_kprobe->post_handler(current_kprobe, regs, 0);
+	if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) {
+		kcb->kprobe_status = KPROBE_HIT_SSDONE;
+		cur->post_handler(cur, regs, 0);
 	}
 
-	resume_execution(current_kprobe, regs);
-	regs->eflags |= kprobe_saved_rflags;
+	resume_execution(cur, regs, kcb);
+	regs->eflags |= kcb->kprobe_saved_rflags;
 
 	/* Restore the original saved kprobes variables and continue. */
-	if (kprobe_status == KPROBE_REENTER) {
-		restore_previous_kprobe();
+	if (kcb->kprobe_status == KPROBE_REENTER) {
+		restore_previous_kprobe(kcb);
 		goto out;
-	} else {
-		unlock_kprobes();
 	}
+	reset_current_kprobe();
 out:
 	preempt_enable_no_resched();
 
@@ -575,18 +566,19 @@ out:
 	return 1;
 }
 
-/* Interrupts disabled, kprobe_lock held. */
 int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
 {
-	if (current_kprobe->fault_handler
-	    && current_kprobe->fault_handler(current_kprobe, regs, trapnr))
+	struct kprobe *cur = kprobe_running();
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr))
 		return 1;
 
-	if (kprobe_status & KPROBE_HIT_SS) {
-		resume_execution(current_kprobe, regs);
-		regs->eflags |= kprobe_old_rflags;
+	if (kcb->kprobe_status & KPROBE_HIT_SS) {
+		resume_execution(cur, regs, kcb);
+		regs->eflags |= kcb->kprobe_old_rflags;
 
-		unlock_kprobes();
+		reset_current_kprobe();
 		preempt_enable_no_resched();
 	}
 	return 0;
@@ -599,39 +591,41 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
 				       unsigned long val, void *data)
 {
 	struct die_args *args = (struct die_args *)data;
+	int ret = NOTIFY_DONE;
+
 	switch (val) {
 	case DIE_INT3:
 		if (kprobe_handler(args->regs))
-			return NOTIFY_STOP;
+			ret = NOTIFY_STOP;
 		break;
 	case DIE_DEBUG:
 		if (post_kprobe_handler(args->regs))
-			return NOTIFY_STOP;
+			ret = NOTIFY_STOP;
 		break;
 	case DIE_GPF:
-		if (kprobe_running() &&
-		    kprobe_fault_handler(args->regs, args->trapnr))
-			return NOTIFY_STOP;
-		break;
 	case DIE_PAGE_FAULT:
+		/* kprobe_running() needs smp_processor_id() */
+		preempt_disable();
 		if (kprobe_running() &&
 		    kprobe_fault_handler(args->regs, args->trapnr))
-			return NOTIFY_STOP;
+			ret = NOTIFY_STOP;
+		preempt_enable();
 		break;
 	default:
 		break;
 	}
-	return NOTIFY_DONE;
+	return ret;
 }
 
 int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
 {
 	struct jprobe *jp = container_of(p, struct jprobe, kp);
 	unsigned long addr;
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
 
-	jprobe_saved_regs = *regs;
-	jprobe_saved_rsp = (long *) regs->rsp;
-	addr = (unsigned long)jprobe_saved_rsp;
+	kcb->jprobe_saved_regs = *regs;
+	kcb->jprobe_saved_rsp = (long *) regs->rsp;
+	addr = (unsigned long)(kcb->jprobe_saved_rsp);
 	/*
 	 * As Linus pointed out, gcc assumes that the callee
 	 * owns the argument space and could overwrite it, e.g.
@@ -639,7 +633,8 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
 	 * we also save and restore enough stack bytes to cover
 	 * the argument area.
 	 */
-	memcpy(jprobes_stack, (kprobe_opcode_t *) addr, MIN_STACK_SIZE(addr));
+	memcpy(kcb->jprobes_stack, (kprobe_opcode_t *)addr,
+			MIN_STACK_SIZE(addr));
 	regs->eflags &= ~IF_MASK;
 	regs->rip = (unsigned long)(jp->entry);
 	return 1;
@@ -647,36 +642,40 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
 
 void __kprobes jprobe_return(void)
 {
-	preempt_enable_no_resched();
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
 	asm volatile ("       xchg   %%rbx,%%rsp     \n"
 		      "       int3			\n"
 		      "       .globl jprobe_return_end	\n"
 		      "       jprobe_return_end:	\n"
 		      "       nop			\n"::"b"
-		      (jprobe_saved_rsp):"memory");
+		      (kcb->jprobe_saved_rsp):"memory");
 }
 
 int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
 {
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
 	u8 *addr = (u8 *) (regs->rip - 1);
-	unsigned long stack_addr = (unsigned long)jprobe_saved_rsp;
+	unsigned long stack_addr = (unsigned long)(kcb->jprobe_saved_rsp);
 	struct jprobe *jp = container_of(p, struct jprobe, kp);
 
 	if ((addr > (u8 *) jprobe_return) && (addr < (u8 *) jprobe_return_end)) {
-		if ((long *)regs->rsp != jprobe_saved_rsp) {
+		if ((long *)regs->rsp != kcb->jprobe_saved_rsp) {
 			struct pt_regs *saved_regs =
-			    container_of(jprobe_saved_rsp, struct pt_regs, rsp);
+			    container_of(kcb->jprobe_saved_rsp,
+					    struct pt_regs, rsp);
 			printk("current rsp %p does not match saved rsp %p\n",
-			       (long *)regs->rsp, jprobe_saved_rsp);
+			       (long *)regs->rsp, kcb->jprobe_saved_rsp);
 			printk("Saved registers for jprobe %p\n", jp);
 			show_registers(saved_regs);
 			printk("Current registers\n");
 			show_registers(regs);
 			BUG();
 		}
-		*regs = jprobe_saved_regs;
-		memcpy((kprobe_opcode_t *) stack_addr, jprobes_stack,
+		*regs = kcb->jprobe_saved_regs;
+		memcpy((kprobe_opcode_t *) stack_addr, kcb->jprobes_stack,
 		       MIN_STACK_SIZE(stack_addr));
+		preempt_enable_no_resched();
 		return 1;
 	}
 	return 0;
diff --git a/arch/x86_64/kernel/mce.c b/arch/x86_64/kernel/mce.c
index 08203b07f4bd..183dc6105429 100644
--- a/arch/x86_64/kernel/mce.c
+++ b/arch/x86_64/kernel/mce.c
@@ -37,7 +37,7 @@ static unsigned long bank[NR_BANKS] = { [0 ... NR_BANKS-1] = ~0UL };
 static unsigned long console_logged;
 static int notify_user;
 static int rip_msr;
-static int mce_bootlog;
+static int mce_bootlog = 1;
 
 /*
  * Lockless MCE logging infrastructure.
@@ -54,9 +54,12 @@ void mce_log(struct mce *mce)
 {
 	unsigned next, entry;
 	mce->finished = 0;
-	smp_wmb();
+	wmb();
 	for (;;) {
 		entry = rcu_dereference(mcelog.next);
+		/* The rmb forces the compiler to reload next in each
+		    iteration */
+		rmb();
 		for (;;) {
 			/* When the buffer fills up discard new entries. Assume
 			   that the earlier errors are the more interesting. */
@@ -69,6 +72,7 @@ void mce_log(struct mce *mce)
 				entry++;
 				continue;
 			}
+			break;
 		}
 		smp_rmb();
 		next = entry + 1;
@@ -76,9 +80,9 @@ void mce_log(struct mce *mce)
 			break;
 	}
 	memcpy(mcelog.entry + entry, mce, sizeof(struct mce));
-	smp_wmb();
+	wmb();
 	mcelog.entry[entry].finished = 1;
-	smp_wmb();
+	wmb();
 
 	if (!test_and_set_bit(0, &console_logged))
 		notify_user = 1;
@@ -343,7 +347,11 @@ static void __cpuinit mce_cpu_quirks(struct cpuinfo_x86 *c)
 		/* disable GART TBL walk error reporting, which trips off 
 		   incorrectly with the IOMMU & 3ware & Cerberus. */
 		clear_bit(10, &bank[4]);
+		/* Lots of broken BIOS around that don't clear them
+		   by default and leave crap in there. Don't log. */
+		mce_bootlog = 0;
 	}
+
 }			
 
 static void __cpuinit mce_cpu_features(struct cpuinfo_x86 *c)
@@ -352,6 +360,9 @@ static void __cpuinit mce_cpu_features(struct cpuinfo_x86 *c)
 	case X86_VENDOR_INTEL:
 		mce_intel_feature_init(c);
 		break;
+	case X86_VENDOR_AMD:
+		mce_amd_feature_init(c);
+		break;
 	default:
 		break;
 	}
@@ -491,16 +502,16 @@ static int __init mcheck_disable(char *str)
 /* mce=off disables machine check. Note you can reenable it later
    using sysfs.
    mce=TOLERANCELEVEL (number, see above)
-   mce=bootlog Log MCEs from before booting. Disabled by default to work
-   around buggy BIOS that leave bogus MCEs.  */
+   mce=bootlog Log MCEs from before booting. Disabled by default on AMD.
+   mce=nobootlog Don't log MCEs from before booting. */
 static int __init mcheck_enable(char *str)
 {
 	if (*str == '=')
 		str++;
 	if (!strcmp(str, "off"))
 		mce_dont_init = 1;
-	else if (!strcmp(str, "bootlog"))
-		mce_bootlog = 1;
+	else if (!strcmp(str, "bootlog") || !strcmp(str,"nobootlog"))
+		mce_bootlog = str[0] == 'b';
 	else if (isdigit(str[0]))
 		get_option(&str, &tolerant);
 	else
diff --git a/arch/x86_64/kernel/mce_amd.c b/arch/x86_64/kernel/mce_amd.c
new file mode 100644
index 000000000000..1f76175ace02
--- /dev/null
+++ b/arch/x86_64/kernel/mce_amd.c
@@ -0,0 +1,538 @@
+/*
+ *  (c) 2005 Advanced Micro Devices, Inc.
+ *  Your use of this code is subject to the terms and conditions of the
+ *  GNU general public license version 2. See "COPYING" or
+ *  http://www.gnu.org/licenses/gpl.html
+ *
+ *  Written by Jacob Shin - AMD, Inc.
+ *
+ *  Support : jacob.shin@amd.com
+ *
+ *  MC4_MISC0 DRAM ECC Error Threshold available under AMD K8 Rev F.
+ *  MC4_MISC0 exists per physical processor.
+ *
+ */
+
+#include <linux/cpu.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kobject.h>
+#include <linux/notifier.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/sysdev.h>
+#include <linux/sysfs.h>
+#include <asm/apic.h>
+#include <asm/mce.h>
+#include <asm/msr.h>
+#include <asm/percpu.h>
+
+#define PFX "mce_threshold: "
+#define VERSION "version 1.00.9"
+#define NR_BANKS 5
+#define THRESHOLD_MAX 0xFFF
+#define INT_TYPE_APIC 0x00020000
+#define MASK_VALID_HI 0x80000000
+#define MASK_LVTOFF_HI 0x00F00000
+#define MASK_COUNT_EN_HI 0x00080000
+#define MASK_INT_TYPE_HI 0x00060000
+#define MASK_OVERFLOW_HI 0x00010000
+#define MASK_ERR_COUNT_HI 0x00000FFF
+#define MASK_OVERFLOW 0x0001000000000000L
+
+struct threshold_bank {
+	unsigned int cpu;
+	u8 bank;
+	u8 interrupt_enable;
+	u16 threshold_limit;
+	struct kobject kobj;
+};
+
+static struct threshold_bank threshold_defaults = {
+	.interrupt_enable = 0,
+	.threshold_limit = THRESHOLD_MAX,
+};
+
+#ifdef CONFIG_SMP
+static unsigned char shared_bank[NR_BANKS] = {
+	0, 0, 0, 0, 1
+};
+#endif
+
+static DEFINE_PER_CPU(unsigned char, bank_map);	/* see which banks are on */
+
+/*
+ * CPU Initialization
+ */
+
+/* must be called with correct cpu affinity */
+static void threshold_restart_bank(struct threshold_bank *b,
+				   int reset, u16 old_limit)
+{
+	u32 mci_misc_hi, mci_misc_lo;
+
+	rdmsr(MSR_IA32_MC0_MISC + b->bank * 4, mci_misc_lo, mci_misc_hi);
+
+	if (b->threshold_limit < (mci_misc_hi & THRESHOLD_MAX))
+		reset = 1;	/* limit cannot be lower than err count */
+
+	if (reset) {		/* reset err count and overflow bit */
+		mci_misc_hi =
+		    (mci_misc_hi & ~(MASK_ERR_COUNT_HI | MASK_OVERFLOW_HI)) |
+		    (THRESHOLD_MAX - b->threshold_limit);
+	} else if (old_limit) {	/* change limit w/o reset */
+		int new_count = (mci_misc_hi & THRESHOLD_MAX) +
+		    (old_limit - b->threshold_limit);
+		mci_misc_hi = (mci_misc_hi & ~MASK_ERR_COUNT_HI) |
+		    (new_count & THRESHOLD_MAX);
+	}
+
+	b->interrupt_enable ?
+	    (mci_misc_hi = (mci_misc_hi & ~MASK_INT_TYPE_HI) | INT_TYPE_APIC) :
+	    (mci_misc_hi &= ~MASK_INT_TYPE_HI);
+
+	mci_misc_hi |= MASK_COUNT_EN_HI;
+	wrmsr(MSR_IA32_MC0_MISC + b->bank * 4, mci_misc_lo, mci_misc_hi);
+}
+
+void __cpuinit mce_amd_feature_init(struct cpuinfo_x86 *c)
+{
+	int bank;
+	u32 mci_misc_lo, mci_misc_hi;
+	unsigned int cpu = smp_processor_id();
+
+	for (bank = 0; bank < NR_BANKS; ++bank) {
+		rdmsr(MSR_IA32_MC0_MISC + bank * 4, mci_misc_lo, mci_misc_hi);
+
+		/* !valid, !counter present, bios locked */
+		if (!(mci_misc_hi & MASK_VALID_HI) ||
+		    !(mci_misc_hi & MASK_VALID_HI >> 1) ||
+		    (mci_misc_hi & MASK_VALID_HI >> 2))
+			continue;
+
+		per_cpu(bank_map, cpu) |= (1 << bank);
+
+#ifdef CONFIG_SMP
+		if (shared_bank[bank] && cpu_core_id[cpu])
+			continue;
+#endif
+
+		setup_threshold_lvt((mci_misc_hi & MASK_LVTOFF_HI) >> 20);
+		threshold_defaults.cpu = cpu;
+		threshold_defaults.bank = bank;
+		threshold_restart_bank(&threshold_defaults, 0, 0);
+	}
+}
+
+/*
+ * APIC Interrupt Handler
+ */
+
+/*
+ * threshold interrupt handler will service THRESHOLD_APIC_VECTOR.
+ * the interrupt goes off when error_count reaches threshold_limit.
+ * the handler will simply log mcelog w/ software defined bank number.
+ */
+asmlinkage void mce_threshold_interrupt(void)
+{
+	int bank;
+	struct mce m;
+
+	ack_APIC_irq();
+	irq_enter();
+
+	memset(&m, 0, sizeof(m));
+	rdtscll(m.tsc);
+	m.cpu = smp_processor_id();
+
+	/* assume first bank caused it */
+	for (bank = 0; bank < NR_BANKS; ++bank) {
+		m.bank = MCE_THRESHOLD_BASE + bank;
+		rdmsrl(MSR_IA32_MC0_MISC + bank * 4, m.misc);
+
+		if (m.misc & MASK_OVERFLOW) {
+			mce_log(&m);
+			goto out;
+		}
+	}
+      out:
+	irq_exit();
+}
+
+/*
+ * Sysfs Interface
+ */
+
+static struct sysdev_class threshold_sysclass = {
+	set_kset_name("threshold"),
+};
+
+static DEFINE_PER_CPU(struct sys_device, device_threshold);
+
+struct threshold_attr {
+        struct attribute attr;
+        ssize_t(*show) (struct threshold_bank *, char *);
+        ssize_t(*store) (struct threshold_bank *, const char *, size_t count);
+};
+
+static DEFINE_PER_CPU(struct threshold_bank *, threshold_banks[NR_BANKS]);
+
+static cpumask_t affinity_set(unsigned int cpu)
+{
+	cpumask_t oldmask = current->cpus_allowed;
+	cpumask_t newmask = CPU_MASK_NONE;
+	cpu_set(cpu, newmask);
+	set_cpus_allowed(current, newmask);
+	return oldmask;
+}
+
+static void affinity_restore(cpumask_t oldmask)
+{
+	set_cpus_allowed(current, oldmask);
+}
+
+#define SHOW_FIELDS(name) \
+        static ssize_t show_ ## name(struct threshold_bank * b, char *buf) \
+        { \
+                return sprintf(buf, "%lx\n", (unsigned long) b->name); \
+        }
+SHOW_FIELDS(interrupt_enable)
+SHOW_FIELDS(threshold_limit)
+
+static ssize_t store_interrupt_enable(struct threshold_bank *b,
+				      const char *buf, size_t count)
+{
+	char *end;
+	cpumask_t oldmask;
+	unsigned long new = simple_strtoul(buf, &end, 0);
+	if (end == buf)
+		return -EINVAL;
+	b->interrupt_enable = !!new;
+
+	oldmask = affinity_set(b->cpu);
+	threshold_restart_bank(b, 0, 0);
+	affinity_restore(oldmask);
+
+	return end - buf;
+}
+
+static ssize_t store_threshold_limit(struct threshold_bank *b,
+				     const char *buf, size_t count)
+{
+	char *end;
+	cpumask_t oldmask;
+	u16 old;
+	unsigned long new = simple_strtoul(buf, &end, 0);
+	if (end == buf)
+		return -EINVAL;
+	if (new > THRESHOLD_MAX)
+		new = THRESHOLD_MAX;
+	if (new < 1)
+		new = 1;
+	old = b->threshold_limit;
+	b->threshold_limit = new;
+
+	oldmask = affinity_set(b->cpu);
+	threshold_restart_bank(b, 0, old);
+	affinity_restore(oldmask);
+
+	return end - buf;
+}
+
+static ssize_t show_error_count(struct threshold_bank *b, char *buf)
+{
+	u32 high, low;
+	cpumask_t oldmask;
+	oldmask = affinity_set(b->cpu);
+	rdmsr(MSR_IA32_MC0_MISC + b->bank * 4, low, high); /* ignore low 32 */
+	affinity_restore(oldmask);
+	return sprintf(buf, "%x\n",
+		       (high & 0xFFF) - (THRESHOLD_MAX - b->threshold_limit));
+}
+
+static ssize_t store_error_count(struct threshold_bank *b,
+				 const char *buf, size_t count)
+{
+	cpumask_t oldmask;
+	oldmask = affinity_set(b->cpu);
+	threshold_restart_bank(b, 1, 0);
+	affinity_restore(oldmask);
+	return 1;
+}
+
+#define THRESHOLD_ATTR(_name,_mode,_show,_store) {            \
+        .attr = {.name = __stringify(_name), .mode = _mode }, \
+        .show = _show,                                        \
+        .store = _store,                                      \
+};
+
+#define ATTR_FIELDS(name) \
+        static struct threshold_attr name = \
+        THRESHOLD_ATTR(name, 0644, show_## name, store_## name)
+
+ATTR_FIELDS(interrupt_enable);
+ATTR_FIELDS(threshold_limit);
+ATTR_FIELDS(error_count);
+
+static struct attribute *default_attrs[] = {
+	&interrupt_enable.attr,
+	&threshold_limit.attr,
+	&error_count.attr,
+	NULL
+};
+
+#define to_bank(k) container_of(k,struct threshold_bank,kobj)
+#define to_attr(a) container_of(a,struct threshold_attr,attr)
+
+static ssize_t show(struct kobject *kobj, struct attribute *attr, char *buf)
+{
+	struct threshold_bank *b = to_bank(kobj);
+	struct threshold_attr *a = to_attr(attr);
+	ssize_t ret;
+	ret = a->show ? a->show(b, buf) : -EIO;
+	return ret;
+}
+
+static ssize_t store(struct kobject *kobj, struct attribute *attr,
+		     const char *buf, size_t count)
+{
+	struct threshold_bank *b = to_bank(kobj);
+	struct threshold_attr *a = to_attr(attr);
+	ssize_t ret;
+	ret = a->store ? a->store(b, buf, count) : -EIO;
+	return ret;
+}
+
+static struct sysfs_ops threshold_ops = {
+	.show = show,
+	.store = store,
+};
+
+static struct kobj_type threshold_ktype = {
+	.sysfs_ops = &threshold_ops,
+	.default_attrs = default_attrs,
+};
+
+/* symlinks sibling shared banks to first core.  first core owns dir/files. */
+static __cpuinit int threshold_create_bank(unsigned int cpu, int bank)
+{
+	int err = 0;
+	struct threshold_bank *b = 0;
+
+#ifdef CONFIG_SMP
+	if (cpu_core_id[cpu] && shared_bank[bank]) {	/* symlink */
+		char name[16];
+		unsigned lcpu = first_cpu(cpu_core_map[cpu]);
+		if (cpu_core_id[lcpu])
+			goto out;	/* first core not up yet */
+
+		b = per_cpu(threshold_banks, lcpu)[bank];
+		if (!b)
+			goto out;
+		sprintf(name, "bank%i", bank);
+		err = sysfs_create_link(&per_cpu(device_threshold, cpu).kobj,
+					&b->kobj, name);
+		if (err)
+			goto out;
+		per_cpu(threshold_banks, cpu)[bank] = b;
+		goto out;
+	}
+#endif
+
+	b = kmalloc(sizeof(struct threshold_bank), GFP_KERNEL);
+	if (!b) {
+		err = -ENOMEM;
+		goto out;
+	}
+	memset(b, 0, sizeof(struct threshold_bank));
+
+	b->cpu = cpu;
+	b->bank = bank;
+	b->interrupt_enable = 0;
+	b->threshold_limit = THRESHOLD_MAX;
+	kobject_set_name(&b->kobj, "bank%i", bank);
+	b->kobj.parent = &per_cpu(device_threshold, cpu).kobj;
+	b->kobj.ktype = &threshold_ktype;
+
+	err = kobject_register(&b->kobj);
+	if (err) {
+		kfree(b);
+		goto out;
+	}
+	per_cpu(threshold_banks, cpu)[bank] = b;
+      out:
+	return err;
+}
+
+/* create dir/files for all valid threshold banks */
+static __cpuinit int threshold_create_device(unsigned int cpu)
+{
+	int bank;
+	int err = 0;
+
+	per_cpu(device_threshold, cpu).id = cpu;
+	per_cpu(device_threshold, cpu).cls = &threshold_sysclass;
+	err = sysdev_register(&per_cpu(device_threshold, cpu));
+	if (err)
+		goto out;
+
+	for (bank = 0; bank < NR_BANKS; ++bank) {
+		if (!(per_cpu(bank_map, cpu) & 1 << bank))
+			continue;
+		err = threshold_create_bank(cpu, bank);
+		if (err)
+			goto out;
+	}
+      out:
+	return err;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+/*
+ * let's be hotplug friendly.
+ * in case of multiple core processors, the first core always takes ownership
+ *   of shared sysfs dir/files, and rest of the cores will be symlinked to it.
+ */
+
+/* cpu hotplug call removes all symlinks before first core dies */
+static __cpuinit void threshold_remove_bank(unsigned int cpu, int bank)
+{
+	struct threshold_bank *b;
+	char name[16];
+
+	b = per_cpu(threshold_banks, cpu)[bank];
+	if (!b)
+		return;
+	if (shared_bank[bank] && atomic_read(&b->kobj.kref.refcount) > 2) {
+		sprintf(name, "bank%i", bank);
+		sysfs_remove_link(&per_cpu(device_threshold, cpu).kobj, name);
+		per_cpu(threshold_banks, cpu)[bank] = 0;
+	} else {
+		kobject_unregister(&b->kobj);
+		kfree(per_cpu(threshold_banks, cpu)[bank]);
+	}
+}
+
+static __cpuinit void threshold_remove_device(unsigned int cpu)
+{
+	int bank;
+
+	for (bank = 0; bank < NR_BANKS; ++bank) {
+		if (!(per_cpu(bank_map, cpu) & 1 << bank))
+			continue;
+		threshold_remove_bank(cpu, bank);
+	}
+	sysdev_unregister(&per_cpu(device_threshold, cpu));
+}
+
+/* link all existing siblings when first core comes up */
+static __cpuinit int threshold_create_symlinks(unsigned int cpu)
+{
+	int bank, err = 0;
+	unsigned int lcpu = 0;
+
+	if (cpu_core_id[cpu])
+		return 0;
+	for_each_cpu_mask(lcpu, cpu_core_map[cpu]) {
+		if (lcpu == cpu)
+			continue;
+		for (bank = 0; bank < NR_BANKS; ++bank) {
+			if (!(per_cpu(bank_map, cpu) & 1 << bank))
+				continue;
+			if (!shared_bank[bank])
+				continue;
+			err = threshold_create_bank(lcpu, bank);
+		}
+	}
+	return err;
+}
+
+/* remove all symlinks before first core dies. */
+static __cpuinit void threshold_remove_symlinks(unsigned int cpu)
+{
+	int bank;
+	unsigned int lcpu = 0;
+	if (cpu_core_id[cpu])
+		return;
+	for_each_cpu_mask(lcpu, cpu_core_map[cpu]) {
+		if (lcpu == cpu)
+			continue;
+		for (bank = 0; bank < NR_BANKS; ++bank) {
+			if (!(per_cpu(bank_map, cpu) & 1 << bank))
+				continue;
+			if (!shared_bank[bank])
+				continue;
+			threshold_remove_bank(lcpu, bank);
+		}
+	}
+}
+#else /* !CONFIG_HOTPLUG_CPU */
+static __cpuinit void threshold_create_symlinks(unsigned int cpu)
+{
+}
+static __cpuinit void threshold_remove_symlinks(unsigned int cpu)
+{
+}
+static void threshold_remove_device(unsigned int cpu)
+{
+}
+#endif
+
+/* get notified when a cpu comes on/off */
+static __cpuinit int threshold_cpu_callback(struct notifier_block *nfb,
+					    unsigned long action, void *hcpu)
+{
+	/* cpu was unsigned int to begin with */
+	unsigned int cpu = (unsigned long)hcpu;
+
+	if (cpu >= NR_CPUS)
+		goto out;
+
+	switch (action) {
+	case CPU_ONLINE:
+		threshold_create_device(cpu);
+		threshold_create_symlinks(cpu);
+		break;
+	case CPU_DOWN_PREPARE:
+		threshold_remove_symlinks(cpu);
+		break;
+	case CPU_DOWN_FAILED:
+		threshold_create_symlinks(cpu);
+		break;
+	case CPU_DEAD:
+		threshold_remove_device(cpu);
+		break;
+	default:
+		break;
+	}
+      out:
+	return NOTIFY_OK;
+}
+
+static struct notifier_block threshold_cpu_notifier = {
+	.notifier_call = threshold_cpu_callback,
+};
+
+static __init int threshold_init_device(void)
+{
+	int err;
+	int lcpu = 0;
+
+	err = sysdev_class_register(&threshold_sysclass);
+	if (err)
+		goto out;
+
+	/* to hit CPUs online before the notifier is up */
+	for_each_online_cpu(lcpu) {
+		err = threshold_create_device(lcpu);
+		if (err)
+			goto out;
+	}
+	register_cpu_notifier(&threshold_cpu_notifier);
+
+      out:
+	return err;
+}
+
+device_initcall(threshold_init_device);
diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c
index f16d38d09daf..1105250bf02c 100644
--- a/arch/x86_64/kernel/mpparse.c
+++ b/arch/x86_64/kernel/mpparse.c
@@ -42,7 +42,7 @@ int acpi_found_madt;
  * Various Linux-internal data structures created from the
  * MP-table.
  */
-int apic_version [MAX_APICS];
+unsigned char apic_version [MAX_APICS];
 unsigned char mp_bus_id_to_type [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 };
 int mp_bus_id_to_pci_bus [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 };
 
@@ -65,7 +65,9 @@ unsigned long mp_lapic_addr = 0;
 /* Processor that is doing the boot up */
 unsigned int boot_cpu_id = -1U;
 /* Internal processor count */
-static unsigned int num_processors = 0;
+unsigned int num_processors __initdata = 0;
+
+unsigned disabled_cpus __initdata;
 
 /* Bitmask of physically existing CPUs */
 physid_mask_t phys_cpu_present_map = PHYSID_MASK_NONE;
@@ -106,11 +108,14 @@ static int __init mpf_checksum(unsigned char *mp, int len)
 
 static void __init MP_processor_info (struct mpc_config_processor *m)
 {
-	int ver, cpu;
+	int cpu;
+	unsigned char ver;
 	static int found_bsp=0;
 
-	if (!(m->mpc_cpuflag & CPU_ENABLED))
+	if (!(m->mpc_cpuflag & CPU_ENABLED)) {
+		disabled_cpus++;
 		return;
+	}
 
 	printk(KERN_INFO "Processor #%d %d:%d APIC version %d\n",
 		m->mpc_apicid,
@@ -129,12 +134,14 @@ static void __init MP_processor_info (struct mpc_config_processor *m)
 	}
 
 	cpu = num_processors++;
-
-	if (m->mpc_apicid > MAX_APICS) {
+	
+#if MAX_APICS < 255	
+	if ((int)m->mpc_apicid > MAX_APICS) {
 		printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n",
 			m->mpc_apicid, MAX_APICS);
 		return;
 	}
+#endif
 	ver = m->mpc_apicver;
 
 	physid_set(m->mpc_apicid, phys_cpu_present_map);
@@ -218,7 +225,7 @@ static void __init MP_intsrc_info (struct mpc_config_intsrc *m)
 			m->mpc_irqtype, m->mpc_irqflag & 3,
 			(m->mpc_irqflag >> 2) & 3, m->mpc_srcbus,
 			m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq);
-	if (++mp_irq_entries == MAX_IRQ_SOURCES)
+	if (++mp_irq_entries >= MAX_IRQ_SOURCES)
 		panic("Max # of irq sources exceeded!!\n");
 }
 
@@ -549,7 +556,7 @@ void __init get_smp_config (void)
 		 * Read the physical hardware table.  Anything here will
 		 * override the defaults.
 		 */
-		if (!smp_read_mpc((void *)(unsigned long)mpf->mpf_physptr)) {
+		if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr))) {
 			smp_found_config = 0;
 			printk(KERN_ERR "BIOS bug, MP table errors detected!...\n");
 			printk(KERN_ERR "... disabling SMP support. (tell your hw vendor)\n");
diff --git a/arch/x86_64/kernel/pci-gart.c b/arch/x86_64/kernel/pci-gart.c
index cf0a0315d586..2e28e855ec3c 100644
--- a/arch/x86_64/kernel/pci-gart.c
+++ b/arch/x86_64/kernel/pci-gart.c
@@ -187,7 +187,7 @@ static void flush_gart(struct device *dev)
 
 /* Allocate DMA memory on node near device */
 noinline
-static void *dma_alloc_pages(struct device *dev, unsigned gfp, unsigned order)
+static void *dma_alloc_pages(struct device *dev, gfp_t gfp, unsigned order)
 {
 	struct page *page;
 	int node;
@@ -204,7 +204,7 @@ static void *dma_alloc_pages(struct device *dev, unsigned gfp, unsigned order)
  */
 void *
 dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
-		   unsigned gfp)
+		   gfp_t gfp)
 {
 	void *memory;
 	unsigned long dma_mask = 0;
@@ -220,6 +220,12 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
 	   uses the normal dma_mask for alloc_coherent. */
 	dma_mask &= *dev->dma_mask;
 
+	/* Why <=? Even when the mask is smaller than 4GB it is often larger 
+	   than 16MB and in this case we have a chance of finding fitting memory 
+	   in the next higher zone first. If not retry with true GFP_DMA. -AK */
+	if (dma_mask <= 0xffffffff)
+		gfp |= GFP_DMA32;
+
  again:
 	memory = dma_alloc_pages(dev, gfp, get_order(size));
 	if (memory == NULL)
@@ -245,7 +251,7 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
 				}
 
 				if (!(gfp & GFP_DMA)) { 
-					gfp |= GFP_DMA; 
+					gfp = (gfp & ~GFP_DMA32) | GFP_DMA;
 					goto again;
 				}
 				return NULL;
diff --git a/arch/x86_64/kernel/pci-nommu.c b/arch/x86_64/kernel/pci-nommu.c
index 67d90b89af0b..5a981dca87ff 100644
--- a/arch/x86_64/kernel/pci-nommu.c
+++ b/arch/x86_64/kernel/pci-nommu.c
@@ -24,7 +24,7 @@ EXPORT_SYMBOL(iommu_sac_force);
  */
 
 void *dma_alloc_coherent(struct device *hwdev, size_t size,
-			 dma_addr_t *dma_handle, unsigned gfp)
+			 dma_addr_t *dma_handle, gfp_t gfp)
 {
 	void *ret;
 	u64 mask;
diff --git a/arch/x86_64/kernel/process.c b/arch/x86_64/kernel/process.c
index b5a89c0bdf59..7519fc520eb3 100644
--- a/arch/x86_64/kernel/process.c
+++ b/arch/x86_64/kernel/process.c
@@ -86,12 +86,22 @@ EXPORT_SYMBOL(enable_hlt);
  */
 void default_idle(void)
 {
+	local_irq_enable();
+
 	if (!atomic_read(&hlt_counter)) {
-		local_irq_disable();
-		if (!need_resched())
-			safe_halt();
-		else
-			local_irq_enable();
+		clear_thread_flag(TIF_POLLING_NRFLAG);
+		smp_mb__after_clear_bit();
+		while (!need_resched()) {
+			local_irq_disable();
+			if (!need_resched())
+				safe_halt();
+			else
+				local_irq_enable();
+		}
+		set_thread_flag(TIF_POLLING_NRFLAG);
+	} else {
+		while (!need_resched())
+			cpu_relax();
 	}
 }
 
@@ -102,30 +112,16 @@ void default_idle(void)
  */
 static void poll_idle (void)
 {
-	int oldval;
-
 	local_irq_enable();
 
-	/*
-	 * Deal with another CPU just having chosen a thread to
-	 * run here:
-	 */
-	oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED);
-
-	if (!oldval) {
-		set_thread_flag(TIF_POLLING_NRFLAG); 
-		asm volatile(
-			"2:"
-			"testl %0,%1;"
-			"rep; nop;"
-			"je 2b;"
-			: :
-			"i" (_TIF_NEED_RESCHED), 
-			"m" (current_thread_info()->flags));
-		clear_thread_flag(TIF_POLLING_NRFLAG);
-	} else {
-		set_need_resched();
-	}
+	asm volatile(
+		"2:"
+		"testl %0,%1;"
+		"rep; nop;"
+		"je 2b;"
+		: :
+		"i" (_TIF_NEED_RESCHED),
+		"m" (current_thread_info()->flags));
 }
 
 void cpu_idle_wait(void)
@@ -148,7 +144,8 @@ void cpu_idle_wait(void)
 	do {
 		ssleep(1);
 		for_each_online_cpu(cpu) {
-			if (cpu_isset(cpu, map) && !per_cpu(cpu_idle_state, cpu))
+			if (cpu_isset(cpu, map) &&
+					!per_cpu(cpu_idle_state, cpu))
 				cpu_clear(cpu, map);
 		}
 		cpus_and(map, map, cpu_online_map);
@@ -187,6 +184,8 @@ static inline void play_dead(void)
  */
 void cpu_idle (void)
 {
+	set_thread_flag(TIF_POLLING_NRFLAG);
+
 	/* endless idle loop with no priority at all */
 	while (1) {
 		while (!need_resched()) {
@@ -204,7 +203,9 @@ void cpu_idle (void)
 			idle();
 		}
 
+		preempt_enable_no_resched();
 		schedule();
+		preempt_disable();
 	}
 }
 
@@ -219,15 +220,12 @@ static void mwait_idle(void)
 {
 	local_irq_enable();
 
-	if (!need_resched()) {
-		set_thread_flag(TIF_POLLING_NRFLAG);
-		do {
-			__monitor((void *)&current_thread_info()->flags, 0, 0);
-			if (need_resched())
-				break;
-			__mwait(0, 0);
-		} while (!need_resched());
-		clear_thread_flag(TIF_POLLING_NRFLAG);
+	while (!need_resched()) {
+		__monitor((void *)&current_thread_info()->flags, 0, 0);
+		smp_mb();
+		if (need_resched())
+			break;
+		__mwait(0, 0);
 	}
 }
 
@@ -278,7 +276,8 @@ void __show_regs(struct pt_regs * regs)
 		system_utsname.version);
 	printk("RIP: %04lx:[<%016lx>] ", regs->cs & 0xffff, regs->rip);
 	printk_address(regs->rip); 
-	printk("\nRSP: %04lx:%016lx  EFLAGS: %08lx\n", regs->ss, regs->rsp, regs->eflags);
+	printk("\nRSP: %04lx:%016lx  EFLAGS: %08lx\n", regs->ss, regs->rsp,
+		regs->eflags);
 	printk("RAX: %016lx RBX: %016lx RCX: %016lx\n",
 	       regs->rax, regs->rbx, regs->rcx);
 	printk("RDX: %016lx RSI: %016lx RDI: %016lx\n",
@@ -352,13 +351,6 @@ void flush_thread(void)
 	struct task_struct *tsk = current;
 	struct thread_info *t = current_thread_info();
 
-	/*
-	 * Remove function-return probe instances associated with this task
-	 * and put them back on the free list. Do not insert an exit probe for
-	 * this function, it will be disabled by kprobe_flush_task if you do.
-	 */
-	kprobe_flush_task(tsk);
-
 	if (t->flags & _TIF_ABI_PENDING)
 		t->flags ^= (_TIF_ABI_PENDING | _TIF_IA32);
 
@@ -430,15 +422,14 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long rsp,
 	struct pt_regs * childregs;
 	struct task_struct *me = current;
 
-	childregs = ((struct pt_regs *) (THREAD_SIZE + (unsigned long) p->thread_info)) - 1;
-
+	childregs = ((struct pt_regs *)
+			(THREAD_SIZE + (unsigned long) p->thread_info)) - 1;
 	*childregs = *regs;
 
 	childregs->rax = 0;
 	childregs->rsp = rsp;
-	if (rsp == ~0UL) {
+	if (rsp == ~0UL)
 		childregs->rsp = (unsigned long)childregs;
-	}
 
 	p->thread.rsp = (unsigned long) childregs;
 	p->thread.rsp0 = (unsigned long) (childregs+1);
@@ -460,7 +451,8 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long rsp,
 			p->thread.io_bitmap_max = 0;
 			return -ENOMEM;
 		}
-		memcpy(p->thread.io_bitmap_ptr, me->thread.io_bitmap_ptr, IO_BITMAP_BYTES);
+		memcpy(p->thread.io_bitmap_ptr, me->thread.io_bitmap_ptr,
+				IO_BITMAP_BYTES);
 	} 
 
 	/*
@@ -497,7 +489,8 @@ out:
  * - fold all the options into a flag word and test it with a single test.
  * - could test fs/gs bitsliced
  */
-struct task_struct *__switch_to(struct task_struct *prev_p, struct task_struct *next_p)
+struct task_struct *
+__switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 {
 	struct thread_struct *prev = &prev_p->thread,
 				 *next = &next_p->thread;
@@ -568,7 +561,8 @@ struct task_struct *__switch_to(struct task_struct *prev_p, struct task_struct *
 	prev->userrsp = read_pda(oldrsp); 
 	write_pda(oldrsp, next->userrsp); 
 	write_pda(pcurrent, next_p); 
-	write_pda(kernelstack, (unsigned long)next_p->thread_info + THREAD_SIZE - PDA_STACKOFFSET);
+	write_pda(kernelstack,
+	    (unsigned long)next_p->thread_info + THREAD_SIZE - PDA_STACKOFFSET);
 
 	/*
 	 * Now maybe reload the debug registers
@@ -649,7 +643,9 @@ asmlinkage long sys_fork(struct pt_regs *regs)
 	return do_fork(SIGCHLD, regs->rsp, regs, 0, NULL, NULL);
 }
 
-asmlinkage long sys_clone(unsigned long clone_flags, unsigned long newsp, void __user *parent_tid, void __user *child_tid, struct pt_regs *regs)
+asmlinkage long
+sys_clone(unsigned long clone_flags, unsigned long newsp,
+	  void __user *parent_tid, void __user *child_tid, struct pt_regs *regs)
 {
 	if (!newsp)
 		newsp = regs->rsp;
@@ -685,7 +681,8 @@ unsigned long get_wchan(struct task_struct *p)
 		return 0;
 	fp = *(u64 *)(p->thread.rsp);
 	do { 
-		if (fp < (unsigned long)stack || fp > (unsigned long)stack+THREAD_SIZE)
+		if (fp < (unsigned long)stack ||
+		    fp > (unsigned long)stack+THREAD_SIZE)
 			return 0; 
 		rip = *(u64 *)(fp+8); 
 		if (!in_sched_functions(rip))
@@ -720,8 +717,8 @@ long do_arch_prctl(struct task_struct *task, int code, unsigned long addr)
 			task->thread.gsindex = 0;
 			task->thread.gs = addr;
 			if (doit) {
-		load_gs_index(0);
-		ret = checking_wrmsrl(MSR_KERNEL_GS_BASE, addr); 
+				load_gs_index(0);
+				ret = checking_wrmsrl(MSR_KERNEL_GS_BASE, addr);
 			} 
 		}
 		put_cpu();
@@ -738,7 +735,7 @@ long do_arch_prctl(struct task_struct *task, int code, unsigned long addr)
 			set_32bit_tls(task, FS_TLS, addr);
 			if (doit) { 
 				load_TLS(&task->thread, cpu); 
-				asm volatile("movl %0,%%fs" :: "r" (FS_TLS_SEL));
+				asm volatile("movl %0,%%fs" :: "r"(FS_TLS_SEL));
 			}
 			task->thread.fsindex = FS_TLS_SEL;
 			task->thread.fs = 0;
@@ -748,8 +745,8 @@ long do_arch_prctl(struct task_struct *task, int code, unsigned long addr)
 			if (doit) {
 				/* set the selector to 0 to not confuse
 				   __switch_to */
-		asm volatile("movl %0,%%fs" :: "r" (0));
-		ret = checking_wrmsrl(MSR_FS_BASE, addr); 
+				asm volatile("movl %0,%%fs" :: "r" (0));
+				ret = checking_wrmsrl(MSR_FS_BASE, addr);
 			}
 		}
 		put_cpu();
@@ -758,9 +755,9 @@ long do_arch_prctl(struct task_struct *task, int code, unsigned long addr)
 		unsigned long base; 
 		if (task->thread.fsindex == FS_TLS_SEL)
 			base = read_32bit_tls(task, FS_TLS);
-		else if (doit) {
+		else if (doit)
 			rdmsrl(MSR_FS_BASE, base);
-		} else
+		else
 			base = task->thread.fs;
 		ret = put_user(base, (unsigned long __user *)addr); 
 		break; 
@@ -769,9 +766,9 @@ long do_arch_prctl(struct task_struct *task, int code, unsigned long addr)
 		unsigned long base;
 		if (task->thread.gsindex == GS_TLS_SEL)
 			base = read_32bit_tls(task, GS_TLS);
-		else if (doit) {
+		else if (doit)
 			rdmsrl(MSR_KERNEL_GS_BASE, base);
-		} else
+		else
 			base = task->thread.gs;
 		ret = put_user(base, (unsigned long __user *)addr); 
 		break;
diff --git a/arch/x86_64/kernel/ptrace.c b/arch/x86_64/kernel/ptrace.c
index bbf64b59a21e..a87b6cebe80f 100644
--- a/arch/x86_64/kernel/ptrace.c
+++ b/arch/x86_64/kernel/ptrace.c
@@ -313,48 +313,11 @@ static unsigned long getreg(struct task_struct *child, unsigned long regno)
 
 }
 
-asmlinkage long sys_ptrace(long request, long pid, unsigned long addr, long data)
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
-	struct task_struct *child;
 	long i, ret;
 	unsigned ui;
 
-	/* This lock_kernel fixes a subtle race with suid exec */
-	lock_kernel();
-	ret = -EPERM;
-	if (request == PTRACE_TRACEME) {
-		/* are we already being traced? */
-		if (current->ptrace & PT_PTRACED)
-			goto out;
-		ret = security_ptrace(current->parent, current);
-		if (ret)
-			goto out;
-		/* set the ptrace bit in the process flags. */
-		current->ptrace |= PT_PTRACED;
-		ret = 0;
-		goto out;
-	}
-	ret = -ESRCH;
-	read_lock(&tasklist_lock);
-	child = find_task_by_pid(pid);
-	if (child)
-		get_task_struct(child);
-	read_unlock(&tasklist_lock);
-	if (!child)
-		goto out;
-
-	ret = -EPERM;
-	if (pid == 1)		/* you may not mess with init */
-		goto out_tsk;
-
-	if (request == PTRACE_ATTACH) {
-		ret = ptrace_attach(child);
-		goto out_tsk;
-	}
-	ret = ptrace_check_attach(child, request == PTRACE_KILL); 
-	if (ret < 0) 
-		goto out_tsk;
-
 	switch (request) {
 	/* when I and D space are separate, these will need to be fixed. */
 	case PTRACE_PEEKTEXT: /* read word at location addr. */ 
@@ -608,10 +571,6 @@ asmlinkage long sys_ptrace(long request, long pid, unsigned long addr, long data
 		ret = ptrace_request(child, request, addr, data);
 		break;
 	}
-out_tsk:
-	put_task_struct(child);
-out:
-	unlock_kernel();
 	return ret;
 }
 
diff --git a/arch/x86_64/kernel/reboot.c b/arch/x86_64/kernel/reboot.c
index 47f95687905f..75235ed2b31b 100644
--- a/arch/x86_64/kernel/reboot.c
+++ b/arch/x86_64/kernel/reboot.c
@@ -77,6 +77,7 @@ static inline void kb_wait(void)
 
 void machine_shutdown(void)
 {
+	unsigned long flags;
 	/* Stop the cpus and apics */
 #ifdef CONFIG_SMP
 	int reboot_cpu_id;
@@ -98,7 +99,7 @@ void machine_shutdown(void)
 	smp_send_stop();
 #endif
 
-	local_irq_disable();
+	local_irq_save(flags);
 
 #ifndef CONFIG_SMP
 	disable_local_APIC();
@@ -106,7 +107,7 @@ void machine_shutdown(void)
 
 	disable_IO_APIC();
 
-	local_irq_enable();
+	local_irq_restore(flags);
 }
 
 void machine_emergency_restart(void)
@@ -120,7 +121,7 @@ void machine_emergency_restart(void)
 		/* Could also try the reset bit in the Hammer NB */
 		switch (reboot_type) { 
 		case BOOT_KBD:
-		for (i=0; i<100; i++) {
+		for (i=0; i<10; i++) {
 			kb_wait();
 			udelay(50);
 			outb(0xfe,0x64);         /* pulse reset low */
diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c
index 238f73e1a834..750e01dcbdf4 100644
--- a/arch/x86_64/kernel/setup.c
+++ b/arch/x86_64/kernel/setup.c
@@ -60,6 +60,7 @@
 #include <asm/setup.h>
 #include <asm/mach_apic.h>
 #include <asm/numa.h>
+#include <asm/sections.h>
 
 /*
  * Machine setup..
@@ -103,7 +104,6 @@ struct edid_info edid_info;
 struct e820map e820;
 
 extern int root_mountflags;
-extern char _text, _etext, _edata, _end;
 
 char command_line[COMMAND_LINE_SIZE];
 
@@ -412,7 +412,6 @@ contig_initmem_init(unsigned long start_pfn, unsigned long end_pfn)
 {
 	unsigned long bootmap_size, bootmap;
 
-	memory_present(0, start_pfn, end_pfn);
 	bootmap_size = bootmem_bootmap_pages(end_pfn)<<PAGE_SHIFT;
 	bootmap = find_e820_area(0, end_pfn<<PAGE_SHIFT, bootmap_size);
 	if (bootmap == -1L)
@@ -571,6 +570,8 @@ void __init setup_arch(char **cmdline_p)
 
 	init_memory_mapping(0, (end_pfn_map << PAGE_SHIFT));
 
+	zap_low_mappings(0);
+
 #ifdef CONFIG_ACPI
 	/*
 	 * Initialize the ACPI boot-time table parser (gets the RSDP and SDT).
@@ -657,8 +658,6 @@ void __init setup_arch(char **cmdline_p)
 	}
 #endif
 
-	sparse_init();
-
 	paging_init();
 
 	check_ioapic();
@@ -793,7 +792,7 @@ static void __init amd_detect_cmp(struct cpuinfo_x86 *c)
 #endif
 
 	bits = 0;
-	while ((1 << bits) < c->x86_num_cores)
+	while ((1 << bits) < c->x86_max_cores)
 		bits++;
 
 	/* Low order bits define the core id (index of core in socket) */
@@ -823,16 +822,14 @@ static void __init amd_detect_cmp(struct cpuinfo_x86 *c)
  		if (!node_online(node))
  			node = nearby_node(apicid);
  	}
-  	cpu_to_node[cpu] = node;
+	numa_set_node(cpu, node);
 
   	printk(KERN_INFO "CPU %d(%d) -> Node %d -> Core %d\n",
-  			cpu, c->x86_num_cores, node, cpu_core_id[cpu]);
+  			cpu, c->x86_max_cores, node, cpu_core_id[cpu]);
 #endif
 #endif
 }
 
-#define HWCR 0xc0010015
-
 static int __init init_amd(struct cpuinfo_x86 *c)
 {
 	int r;
@@ -841,14 +838,18 @@ static int __init init_amd(struct cpuinfo_x86 *c)
 #ifdef CONFIG_SMP
 	unsigned long value;
 
-	// Disable TLB flush filter by setting HWCR.FFDIS:
-	// bit 6 of msr C001_0015
-	//
-	// Errata 63 for SH-B3 steppings
-	// Errata 122 for all(?) steppings
-	rdmsrl(HWCR, value);
-	value |= 1 << 6;
-	wrmsrl(HWCR, value);
+	/*
+	 * Disable TLB flush filter by setting HWCR.FFDIS on K8
+	 * bit 6 of msr C001_0015
+ 	 *
+	 * Errata 63 for SH-B3 steppings
+	 * Errata 122 for all steppings (F+ have it disabled by default)
+	 */
+	if (c->x86 == 15) {
+		rdmsrl(MSR_K8_HWCR, value);
+		value |= 1 << 6;
+		wrmsrl(MSR_K8_HWCR, value);
+	}
 #endif
 
 	/* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
@@ -873,9 +874,9 @@ static int __init init_amd(struct cpuinfo_x86 *c)
 	display_cacheinfo(c);
 
 	if (c->extended_cpuid_level >= 0x80000008) {
-		c->x86_num_cores = (cpuid_ecx(0x80000008) & 0xff) + 1;
-		if (c->x86_num_cores & (c->x86_num_cores - 1))
-			c->x86_num_cores = 1;
+		c->x86_max_cores = (cpuid_ecx(0x80000008) & 0xff) + 1;
+		if (c->x86_max_cores & (c->x86_max_cores - 1))
+			c->x86_max_cores = 1;
 
 		amd_detect_cmp(c);
 	}
@@ -887,54 +888,44 @@ static void __cpuinit detect_ht(struct cpuinfo_x86 *c)
 {
 #ifdef CONFIG_SMP
 	u32 	eax, ebx, ecx, edx;
-	int 	index_msb, tmp;
+	int 	index_msb, core_bits;
 	int 	cpu = smp_processor_id();
-	
+
+	cpuid(1, &eax, &ebx, &ecx, &edx);
+
+	c->apicid = phys_pkg_id(0);
+
 	if (!cpu_has(c, X86_FEATURE_HT) || cpu_has(c, X86_FEATURE_CMP_LEGACY))
 		return;
 
-	cpuid(1, &eax, &ebx, &ecx, &edx);
 	smp_num_siblings = (ebx & 0xff0000) >> 16;
-	
+
 	if (smp_num_siblings == 1) {
 		printk(KERN_INFO  "CPU: Hyper-Threading is disabled\n");
-	} else if (smp_num_siblings > 1) {
-		index_msb = 31;
-		/*
-		 * At this point we only support two siblings per
-		 * processor package.
-		 */
+	} else if (smp_num_siblings > 1 ) {
+
 		if (smp_num_siblings > NR_CPUS) {
 			printk(KERN_WARNING "CPU: Unsupported number of the siblings %d", smp_num_siblings);
 			smp_num_siblings = 1;
 			return;
 		}
-		tmp = smp_num_siblings;
-		while ((tmp & 0x80000000 ) == 0) {
-			tmp <<=1 ;
-			index_msb--;
-		}
-		if (smp_num_siblings & (smp_num_siblings - 1))
-			index_msb++;
+
+		index_msb = get_count_order(smp_num_siblings);
 		phys_proc_id[cpu] = phys_pkg_id(index_msb);
-		
+
 		printk(KERN_INFO  "CPU: Physical Processor ID: %d\n",
 		       phys_proc_id[cpu]);
 
-		smp_num_siblings = smp_num_siblings / c->x86_num_cores;
+		smp_num_siblings = smp_num_siblings / c->x86_max_cores;
 
-		tmp = smp_num_siblings;
-		index_msb = 31;
-		while ((tmp & 0x80000000) == 0) {
-			tmp <<=1 ;
-			index_msb--;
-		}
-		if (smp_num_siblings & (smp_num_siblings - 1))
-			index_msb++;
+		index_msb = get_count_order(smp_num_siblings) ;
+
+		core_bits = get_count_order(c->x86_max_cores);
 
-		cpu_core_id[cpu] = phys_pkg_id(index_msb);
+		cpu_core_id[cpu] = phys_pkg_id(index_msb) &
+					       ((1 << core_bits) - 1);
 
-		if (c->x86_num_cores > 1)
+		if (c->x86_max_cores > 1)
 			printk(KERN_INFO  "CPU: Processor Core ID: %d\n",
 			       cpu_core_id[cpu]);
 	}
@@ -965,16 +956,15 @@ static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c)
 static void srat_detect_node(void)
 {
 #ifdef CONFIG_NUMA
-	unsigned apicid, node;
+	unsigned node;
 	int cpu = smp_processor_id();
 
 	/* Don't do the funky fallback heuristics the AMD version employs
 	   for now. */
-	apicid = phys_proc_id[cpu];
-	node = apicid_to_node[apicid];
+	node = apicid_to_node[hard_smp_processor_id()];
 	if (node == NUMA_NO_NODE)
 		node = 0;
-	cpu_to_node[cpu] = node;
+	numa_set_node(cpu, node);
 
 	if (acpi_numa > 0)
 		printk(KERN_INFO "CPU %d -> Node %d\n", cpu, node);
@@ -992,13 +982,18 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 		unsigned eax = cpuid_eax(0x80000008);
 		c->x86_virt_bits = (eax >> 8) & 0xff;
 		c->x86_phys_bits = eax & 0xff;
+		/* CPUID workaround for Intel 0F34 CPU */
+		if (c->x86_vendor == X86_VENDOR_INTEL &&
+		    c->x86 == 0xF && c->x86_model == 0x3 &&
+		    c->x86_mask == 0x4)
+			c->x86_phys_bits = 36;
 	}
 
 	if (c->x86 == 15)
 		c->x86_cache_alignment = c->x86_clflush_size * 2;
 	if (c->x86 >= 15)
 		set_bit(X86_FEATURE_CONSTANT_TSC, &c->x86_capability);
- 	c->x86_num_cores = intel_num_cpu_cores(c);
+ 	c->x86_max_cores = intel_num_cpu_cores(c);
 
 	srat_detect_node();
 }
@@ -1036,7 +1031,7 @@ void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c)
 	c->x86_model_id[0] = '\0';  /* Unset */
 	c->x86_clflush_size = 64;
 	c->x86_cache_alignment = c->x86_clflush_size;
-	c->x86_num_cores = 1;
+	c->x86_max_cores = 1;
 	c->extended_cpuid_level = 0;
 	memset(&c->x86_capability, 0, sizeof c->x86_capability);
 
@@ -1059,10 +1054,10 @@ void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c)
 		c->x86 = (tfms >> 8) & 0xf;
 		c->x86_model = (tfms >> 4) & 0xf;
 		c->x86_mask = tfms & 0xf;
-		if (c->x86 == 0xf) {
+		if (c->x86 == 0xf)
 			c->x86 += (tfms >> 20) & 0xff;
+		if (c->x86 >= 0x6)
 			c->x86_model += ((tfms >> 16) & 0xF) << 4;
-		} 
 		if (c->x86_capability[0] & (1<<19)) 
 			c->x86_clflush_size = ((misc >> 8) & 0xff) * 8;
 	} else {
@@ -1212,7 +1207,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 
 		/* Intel-defined (#2) */
-		"pni", NULL, NULL, "monitor", "ds_cpl", NULL, NULL, "est",
+		"pni", NULL, NULL, "monitor", "ds_cpl", "vmx", NULL, "est",
 		"tm2", NULL, "cid", NULL, NULL, "cx16", "xtpr", NULL,
 		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
@@ -1270,13 +1265,12 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		seq_printf(m, "cache size\t: %d KB\n", c->x86_cache_size);
 	
 #ifdef CONFIG_SMP
-	if (smp_num_siblings * c->x86_num_cores > 1) {
+	if (smp_num_siblings * c->x86_max_cores > 1) {
 		int cpu = c - cpu_data;
 		seq_printf(m, "physical id\t: %d\n", phys_proc_id[cpu]);
-		seq_printf(m, "siblings\t: %d\n",
-				c->x86_num_cores * smp_num_siblings);
+		seq_printf(m, "siblings\t: %d\n", cpus_weight(cpu_core_map[cpu]));
 		seq_printf(m, "core id\t\t: %d\n", cpu_core_id[cpu]);
-		seq_printf(m, "cpu cores\t: %d\n", c->x86_num_cores);
+		seq_printf(m, "cpu cores\t: %d\n", c->booted_cores);
 	}
 #endif	
 
diff --git a/arch/x86_64/kernel/setup64.c b/arch/x86_64/kernel/setup64.c
index bd33be24a386..06dc354375c3 100644
--- a/arch/x86_64/kernel/setup64.c
+++ b/arch/x86_64/kernel/setup64.c
@@ -87,6 +87,10 @@ void __init setup_per_cpu_areas(void)
 	int i;
 	unsigned long size;
 
+#ifdef CONFIG_HOTPLUG_CPU
+	prefill_possible_map();
+#endif
+
 	/* Copy section for each CPU (we discard the original) */
 	size = ALIGN(__per_cpu_end - __per_cpu_start, SMP_CACHE_BYTES);
 #ifdef CONFIG_MODULES
@@ -137,7 +141,6 @@ void pda_init(int cpu)
 			panic("cannot allocate irqstack for cpu %d", cpu); 
 	}
 
-	asm volatile("movq %0,%%cr3" :: "r" (__pa_symbol(&init_level4_pgt)));
 
 	pda->irqstackptr += IRQSTACKSIZE-64;
 } 
@@ -193,6 +196,7 @@ void __cpuinit cpu_init (void)
 	/* CPU 0 is initialised in head64.c */
 	if (cpu != 0) {
 		pda_init(cpu);
+		zap_low_mappings(cpu);
 	} else 
 		estacks = boot_exception_stacks; 
 
diff --git a/arch/x86_64/kernel/signal.c b/arch/x86_64/kernel/signal.c
index d642fbf3da29..5876df116c92 100644
--- a/arch/x86_64/kernel/signal.c
+++ b/arch/x86_64/kernel/signal.c
@@ -110,6 +110,15 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, unsigned
 	COPY(r14);
 	COPY(r15);
 
+	/* Kernel saves and restores only the CS segment register on signals,
+	 * which is the bare minimum needed to allow mixed 32/64-bit code.
+	 * App's signal handler can save/restore other segments if needed. */
+	{
+		unsigned cs;
+		err |= __get_user(cs, &sc->cs);
+		regs->cs = cs | 3;	/* Force into user mode */
+	}
+
 	{
 		unsigned int tmpflags;
 		err |= __get_user(tmpflags, &sc->eflags);
@@ -187,6 +196,7 @@ setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, unsigned lo
 {
 	int err = 0;
 
+	err |= __put_user(regs->cs, &sc->cs);
 	err |= __put_user(0, &sc->gs);
 	err |= __put_user(0, &sc->fs);
 
@@ -318,7 +328,14 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 
 	regs->rsp = (unsigned long)frame;
 
+	/* Set up the CS register to run signal handlers in 64-bit mode,
+	   even if the handler happens to be interrupting 32-bit code. */
+	regs->cs = __USER_CS;
+
+	/* This, by contrast, has nothing to do with segment registers -
+	   see include/asm-x86_64/uaccess.h for details. */
 	set_fs(USER_DS);
+
 	regs->eflags &= ~TF_MASK;
 	if (test_thread_flag(TIF_SINGLESTEP))
 		ptrace_notify(SIGTRAP);
diff --git a/arch/x86_64/kernel/smp.c b/arch/x86_64/kernel/smp.c
index 9db9dda161b4..cfc3d9dccbd9 100644
--- a/arch/x86_64/kernel/smp.c
+++ b/arch/x86_64/kernel/smp.c
@@ -28,8 +28,6 @@
 #include <asm/proto.h>
 #include <asm/apicdef.h>
 
-#define __cpuinit __init
-
 /*
  *	Smarter SMP flushing macros. 
  *		c/o Linus Torvalds.
@@ -452,13 +450,14 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
 
 void smp_stop_cpu(void)
 {
+	unsigned long flags;
 	/*
 	 * Remove this CPU:
 	 */
 	cpu_clear(smp_processor_id(), cpu_online_map);
-	local_irq_disable();
+	local_irq_save(flags);
 	disable_local_APIC();
-	local_irq_enable(); 
+	local_irq_restore(flags);
 }
 
 static void smp_really_stop_cpu(void *dummy)
diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c
index e12d7baeb33e..683c33f7b967 100644
--- a/arch/x86_64/kernel/smpboot.c
+++ b/arch/x86_64/kernel/smpboot.c
@@ -64,9 +64,8 @@
 int smp_num_siblings = 1;
 /* Package ID of each logical CPU */
 u8 phys_proc_id[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID };
+/* core ID of each logical CPU */
 u8 cpu_core_id[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID };
-EXPORT_SYMBOL(phys_proc_id);
-EXPORT_SYMBOL(cpu_core_id);
 
 /* Bitmask of currently online CPUs */
 cpumask_t cpu_online_map __read_mostly;
@@ -89,7 +88,10 @@ struct cpuinfo_x86 cpu_data[NR_CPUS] __cacheline_aligned;
 /* Set when the idlers are all forked */
 int smp_threads_ready;
 
+/* representing HT siblings of each logical CPU */
 cpumask_t cpu_sibling_map[NR_CPUS] __read_mostly;
+
+/* representing HT and core siblings of each logical CPU */
 cpumask_t cpu_core_map[NR_CPUS] __read_mostly;
 EXPORT_SYMBOL(cpu_core_map);
 
@@ -436,30 +438,59 @@ void __cpuinit smp_callin(void)
 	cpu_set(cpuid, cpu_callin_map);
 }
 
+/* representing cpus for which sibling maps can be computed */
+static cpumask_t cpu_sibling_setup_map;
+
 static inline void set_cpu_sibling_map(int cpu)
 {
 	int i;
+	struct cpuinfo_x86 *c = cpu_data;
+
+	cpu_set(cpu, cpu_sibling_setup_map);
 
 	if (smp_num_siblings > 1) {
-		for_each_cpu(i) {
-			if (cpu_core_id[cpu] == cpu_core_id[i]) {
+		for_each_cpu_mask(i, cpu_sibling_setup_map) {
+			if (phys_proc_id[cpu] == phys_proc_id[i] &&
+			    cpu_core_id[cpu] == cpu_core_id[i]) {
 				cpu_set(i, cpu_sibling_map[cpu]);
 				cpu_set(cpu, cpu_sibling_map[i]);
+				cpu_set(i, cpu_core_map[cpu]);
+				cpu_set(cpu, cpu_core_map[i]);
 			}
 		}
 	} else {
 		cpu_set(cpu, cpu_sibling_map[cpu]);
 	}
 
-	if (current_cpu_data.x86_num_cores > 1) {
-		for_each_cpu(i) {
-			if (phys_proc_id[cpu] == phys_proc_id[i]) {
-				cpu_set(i, cpu_core_map[cpu]);
-				cpu_set(cpu, cpu_core_map[i]);
-			}
-		}
-	} else {
+	if (current_cpu_data.x86_max_cores == 1) {
 		cpu_core_map[cpu] = cpu_sibling_map[cpu];
+		c[cpu].booted_cores = 1;
+		return;
+	}
+
+	for_each_cpu_mask(i, cpu_sibling_setup_map) {
+		if (phys_proc_id[cpu] == phys_proc_id[i]) {
+			cpu_set(i, cpu_core_map[cpu]);
+			cpu_set(cpu, cpu_core_map[i]);
+			/*
+			 *  Does this new cpu bringup a new core?
+			 */
+			if (cpus_weight(cpu_sibling_map[cpu]) == 1) {
+				/*
+				 * for each core in package, increment
+				 * the booted_cores for this new cpu
+				 */
+				if (first_cpu(cpu_sibling_map[i]) == i)
+					c[cpu].booted_cores++;
+				/*
+				 * increment the core count for all
+				 * the other cpus in this package
+				 */
+				if (i != cpu)
+					c[i].booted_cores++;
+			} else if (i != cpu && !c[cpu].booted_cores)
+				c[cpu].booted_cores = c[i].booted_cores;
+		}
 	}
 }
 
@@ -474,6 +505,7 @@ void __cpuinit start_secondary(void)
 	 * things done here to the most necessary things.
 	 */
 	cpu_init();
+	preempt_disable();
 	smp_callin();
 
 	/* otherwise gcc will move up the smp_processor_id before the cpu_init */
@@ -880,6 +912,9 @@ static __init void disable_smp(void)
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
+
+int additional_cpus __initdata = -1;
+
 /*
  * cpu_possible_map should be static, it cannot change as cpu's
  * are onlined, or offlined. The reason is per-cpu data-structures
@@ -888,14 +923,38 @@ static __init void disable_smp(void)
  * cpu_present_map on the other hand can change dynamically.
  * In case when cpu_hotplug is not compiled, then we resort to current
  * behaviour, which is cpu_possible == cpu_present.
- * If cpu-hotplug is supported, then we need to preallocate for all
- * those NR_CPUS, hence cpu_possible_map represents entire NR_CPUS range.
  * - Ashok Raj
+ *
+ * Three ways to find out the number of additional hotplug CPUs:
+ * - If the BIOS specified disabled CPUs in ACPI/mptables use that.
+ * - otherwise use half of the available CPUs or 2, whatever is more.
+ * - The user can overwrite it with additional_cpus=NUM
+ * We do this because additional CPUs waste a lot of memory.
+ * -AK
  */
-static void prefill_possible_map(void)
+__init void prefill_possible_map(void)
 {
 	int i;
-	for (i = 0; i < NR_CPUS; i++)
+	int possible;
+
+ 	if (additional_cpus == -1) {
+ 		if (disabled_cpus > 0) {
+ 			additional_cpus = disabled_cpus;
+ 		} else {
+ 			additional_cpus = num_processors / 2;
+ 			if (additional_cpus == 0)
+ 				additional_cpus = 2;
+ 		}
+ 	}
+	possible = num_processors + additional_cpus;
+	if (possible > NR_CPUS) 
+		possible = NR_CPUS;
+
+	printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n",
+		possible,
+	        max_t(int, possible - num_processors, 0));
+
+	for (i = 0; i < possible; i++)
 		cpu_set(i, cpu_possible_map);
 }
 #endif
@@ -966,10 +1025,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	nmi_watchdog_default();
 	current_cpu_data = boot_cpu_data;
 	current_thread_info()->cpu = 0;  /* needed? */
-
-#ifdef CONFIG_HOTPLUG_CPU
-	prefill_possible_map();
-#endif
+	set_cpu_sibling_map(0);
 
 	if (smp_sanity_check(max_cpus) < 0) {
 		printk(KERN_INFO "SMP disabled\n");
@@ -1013,8 +1069,6 @@ void __init smp_prepare_boot_cpu(void)
 	int me = smp_processor_id();
 	cpu_set(me, cpu_online_map);
 	cpu_set(me, cpu_callout_map);
-	cpu_set(0, cpu_sibling_map[0]);
-	cpu_set(0, cpu_core_map[0]);
 	per_cpu(cpu_state, me) = CPU_ONLINE;
 }
 
@@ -1067,9 +1121,6 @@ int __cpuinit __cpu_up(unsigned int cpu)
  */
 void __init smp_cpus_done(unsigned int max_cpus)
 {
-#ifndef CONFIG_HOTPLUG_CPU
-	zap_low_mappings();
-#endif
 	smp_cleanup_boot();
 
 #ifdef CONFIG_X86_IO_APIC
@@ -1086,15 +1137,24 @@ void __init smp_cpus_done(unsigned int max_cpus)
 static void remove_siblinginfo(int cpu)
 {
 	int sibling;
+	struct cpuinfo_x86 *c = cpu_data;
 
+	for_each_cpu_mask(sibling, cpu_core_map[cpu]) {
+		cpu_clear(cpu, cpu_core_map[sibling]);
+		/*
+		 * last thread sibling in this cpu core going down
+		 */
+		if (cpus_weight(cpu_sibling_map[cpu]) == 1)
+			c[sibling].booted_cores--;
+	}
+			
 	for_each_cpu_mask(sibling, cpu_sibling_map[cpu])
 		cpu_clear(cpu, cpu_sibling_map[sibling]);
-	for_each_cpu_mask(sibling, cpu_core_map[cpu])
-		cpu_clear(cpu, cpu_core_map[sibling]);
 	cpus_clear(cpu_sibling_map[cpu]);
 	cpus_clear(cpu_core_map[cpu]);
 	phys_proc_id[cpu] = BAD_APICID;
 	cpu_core_id[cpu] = BAD_APICID;
+	cpu_clear(cpu, cpu_sibling_setup_map);
 }
 
 void remove_cpu_from_maps(void)
@@ -1158,6 +1218,12 @@ void __cpu_die(unsigned int cpu)
  	printk(KERN_ERR "CPU %u didn't die...\n", cpu);
 }
 
+static __init int setup_additional_cpus(char *s)
+{
+	return get_option(&s, &additional_cpus);
+}
+__setup("additional_cpus=", setup_additional_cpus);
+
 #else /* ... !CONFIG_HOTPLUG_CPU */
 
 int __cpu_disable(void)
diff --git a/arch/x86_64/kernel/suspend.c b/arch/x86_64/kernel/suspend.c
index ebb9abf3ce6d..fd2bef780882 100644
--- a/arch/x86_64/kernel/suspend.c
+++ b/arch/x86_64/kernel/suspend.c
@@ -11,6 +11,8 @@
 #include <linux/smp.h>
 #include <linux/suspend.h>
 #include <asm/proto.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
 
 struct saved_context saved_context;
 
@@ -61,13 +63,12 @@ void save_processor_state(void)
 	__save_processor_state(&saved_context);
 }
 
-static void
-do_fpu_end(void)
+static void do_fpu_end(void)
 {
-        /* restore FPU regs if necessary */
-	/* Do it out of line so that gcc does not move cr0 load to some stupid place */
-        kernel_fpu_end();
-	mxcsr_feature_mask_init();
+	/*
+	 * Restore FPU regs if necessary
+	 */
+	kernel_fpu_end();
 }
 
 void __restore_processor_state(struct saved_context *ctxt)
@@ -140,4 +141,83 @@ void fix_processor_context(void)
 
 }
 
+#ifdef CONFIG_SOFTWARE_SUSPEND
+/* Defined in arch/x86_64/kernel/suspend_asm.S */
+extern int restore_image(void);
+
+pgd_t *temp_level4_pgt;
+
+static int res_phys_pud_init(pud_t *pud, unsigned long address, unsigned long end)
+{
+	long i, j;
+
+	i = pud_index(address);
+	pud = pud + i;
+	for (; i < PTRS_PER_PUD; pud++, i++) {
+		unsigned long paddr;
+		pmd_t *pmd;
+
+		paddr = address + i*PUD_SIZE;
+		if (paddr >= end)
+			break;
+
+		pmd = (pmd_t *)get_safe_page(GFP_ATOMIC);
+		if (!pmd)
+			return -ENOMEM;
+		set_pud(pud, __pud(__pa(pmd) | _KERNPG_TABLE));
+		for (j = 0; j < PTRS_PER_PMD; pmd++, j++, paddr += PMD_SIZE) {
+			unsigned long pe;
+
+			if (paddr >= end)
+				break;
+			pe = _PAGE_NX | _PAGE_PSE | _KERNPG_TABLE | paddr;
+			pe &= __supported_pte_mask;
+			set_pmd(pmd, __pmd(pe));
+		}
+	}
+	return 0;
+}
+
+static int set_up_temporary_mappings(void)
+{
+	unsigned long start, end, next;
+	int error;
+
+	temp_level4_pgt = (pgd_t *)get_safe_page(GFP_ATOMIC);
+	if (!temp_level4_pgt)
+		return -ENOMEM;
+
+	/* It is safe to reuse the original kernel mapping */
+	set_pgd(temp_level4_pgt + pgd_index(__START_KERNEL_map),
+		init_level4_pgt[pgd_index(__START_KERNEL_map)]);
+
+	/* Set up the direct mapping from scratch */
+	start = (unsigned long)pfn_to_kaddr(0);
+	end = (unsigned long)pfn_to_kaddr(end_pfn);
+
+	for (; start < end; start = next) {
+		pud_t *pud = (pud_t *)get_safe_page(GFP_ATOMIC);
+		if (!pud)
+			return -ENOMEM;
+		next = start + PGDIR_SIZE;
+		if (next > end)
+			next = end;
+		if ((error = res_phys_pud_init(pud, __pa(start), __pa(next))))
+			return error;
+		set_pgd(temp_level4_pgt + pgd_index(start),
+			mk_kernel_pgd(__pa(pud)));
+	}
+	return 0;
+}
+
+int swsusp_arch_resume(void)
+{
+	int error;
 
+	/* We have got enough memory and from now on we cannot recover */
+	if ((error = set_up_temporary_mappings()))
+		return error;
+	restore_image();
+	return 0;
+}
+#endif /* CONFIG_SOFTWARE_SUSPEND */
diff --git a/arch/x86_64/kernel/suspend_asm.S b/arch/x86_64/kernel/suspend_asm.S
index 4d659e97df10..320b6fb00cca 100644
--- a/arch/x86_64/kernel/suspend_asm.S
+++ b/arch/x86_64/kernel/suspend_asm.S
@@ -39,12 +39,13 @@ ENTRY(swsusp_arch_suspend)
 	call swsusp_save
 	ret
 
-ENTRY(swsusp_arch_resume)
-	/* set up cr3 */	
-	leaq	init_level4_pgt(%rip),%rax
-	subq	$__START_KERNEL_map,%rax
-	movq	%rax,%cr3
-
+ENTRY(restore_image)
+	/* switch to temporary page tables */
+	movq	$__PAGE_OFFSET, %rdx
+	movq	temp_level4_pgt(%rip), %rax
+	subq	%rdx, %rax
+	movq	%rax, %cr3
+	/* Flush TLB */
 	movq	mmu_cr4_features(%rip), %rax
 	movq	%rax, %rdx
 	andq	$~(1<<7), %rdx	# PGE
@@ -69,6 +70,10 @@ loop:
 	movq	pbe_next(%rdx), %rdx
 	jmp	loop
 done:
+	/* go back to the original page tables */
+	leaq	init_level4_pgt(%rip), %rax
+	subq	$__START_KERNEL_map, %rax
+	movq	%rax, %cr3
 	/* Flush TLB, including "global" things (vmalloc) */
 	movq	mmu_cr4_features(%rip), %rax
 	movq	%rax, %rdx
diff --git a/arch/x86_64/kernel/sys_x86_64.c b/arch/x86_64/kernel/sys_x86_64.c
index cc7821c68851..6449ea8fe756 100644
--- a/arch/x86_64/kernel/sys_x86_64.c
+++ b/arch/x86_64/kernel/sys_x86_64.c
@@ -154,17 +154,3 @@ asmlinkage long sys_uname(struct new_utsname __user * name)
 		err |= copy_to_user(&name->machine, "i686", 5); 		
 	return err ? -EFAULT : 0;
 }
-
-asmlinkage long sys_time64(long __user * tloc)
-{
-	struct timeval now; 
-	int i; 
-
-	do_gettimeofday(&now);
-	i = now.tv_sec;
-	if (tloc) {
-		if (put_user(i,tloc))
-			i = -EFAULT;
-	}
-	return i;
-}
diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c
index 2373cb8b8625..fdaddc4e5284 100644
--- a/arch/x86_64/kernel/time.c
+++ b/arch/x86_64/kernel/time.c
@@ -42,10 +42,6 @@
 #include <asm/apic.h>
 #endif
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 #ifdef CONFIG_CPU_FREQ
 static void cpufreq_delayed_get(void);
 #endif
@@ -481,9 +477,9 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 static unsigned int cyc2ns_scale;
 #define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
 
-static inline void set_cyc2ns_scale(unsigned long cpu_mhz)
+static inline void set_cyc2ns_scale(unsigned long cpu_khz)
 {
-	cyc2ns_scale = (1000 << CYC2NS_SCALE_FACTOR)/cpu_mhz;
+	cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz;
 }
 
 static inline unsigned long long cycles_2_ns(unsigned long long cyc)
@@ -655,7 +651,7 @@ static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
 			vxtime.tsc_quot = (1000L << 32) / cpu_khz;
 	}
 	
-	set_cyc2ns_scale(cpu_khz_ref / 1000);
+	set_cyc2ns_scale(cpu_khz_ref);
 
 	return 0;
 }
@@ -939,7 +935,7 @@ void __init time_init(void)
 	rdtscll_sync(&vxtime.last_tsc);
 	setup_irq(0, &irq0);
 
-	set_cyc2ns_scale(cpu_khz / 1000);
+	set_cyc2ns_scale(cpu_khz);
 
 #ifndef CONFIG_SMP
 	time_init_gtod();
@@ -959,9 +955,6 @@ static __init int unsynchronized_tsc(void)
  	   are handled in the OEM check above. */
  	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
  		return 0;
- 	/* All in a single socket - should be synchronized */
- 	if (cpus_weight(cpu_core_map[0]) == num_online_cpus())
- 		return 0;
 #endif
  	/* Assume multi socket systems are not synchronized */
  	return num_online_cpus() > 1;
@@ -1096,6 +1089,7 @@ static unsigned long PIE_freq = DEFAULT_RTC_INT_FREQ;
 static unsigned long PIE_count;
 
 static unsigned long hpet_rtc_int_freq; /* RTC interrupt frequency */
+static unsigned int hpet_t1_cmp; /* cached comparator register */
 
 int is_hpet_enabled(void)
 {
@@ -1132,10 +1126,12 @@ int hpet_rtc_timer_init(void)
 	cnt = hpet_readl(HPET_COUNTER);
 	cnt += ((hpet_tick*HZ)/hpet_rtc_int_freq);
 	hpet_writel(cnt, HPET_T1_CMP);
+	hpet_t1_cmp = cnt;
 	local_irq_restore(flags);
 
 	cfg = hpet_readl(HPET_T1_CFG);
-	cfg |= HPET_TN_ENABLE | HPET_TN_SETVAL | HPET_TN_32BIT;
+	cfg &= ~HPET_TN_PERIODIC;
+	cfg |= HPET_TN_ENABLE | HPET_TN_32BIT;
 	hpet_writel(cfg, HPET_T1_CFG);
 
 	return 1;
@@ -1145,8 +1141,12 @@ static void hpet_rtc_timer_reinit(void)
 {
 	unsigned int cfg, cnt;
 
-	if (!(PIE_on | AIE_on | UIE_on))
+	if (unlikely(!(PIE_on | AIE_on | UIE_on))) {
+		cfg = hpet_readl(HPET_T1_CFG);
+		cfg &= ~HPET_TN_ENABLE;
+		hpet_writel(cfg, HPET_T1_CFG);
 		return;
+	}
 
 	if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ))
 		hpet_rtc_int_freq = PIE_freq;
@@ -1154,15 +1154,10 @@ static void hpet_rtc_timer_reinit(void)
 		hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ;
 
 	/* It is more accurate to use the comparator value than current count.*/
-	cnt = hpet_readl(HPET_T1_CMP);
+	cnt = hpet_t1_cmp;
 	cnt += hpet_tick*HZ/hpet_rtc_int_freq;
 	hpet_writel(cnt, HPET_T1_CMP);
-
-	cfg = hpet_readl(HPET_T1_CFG);
-	cfg |= HPET_TN_ENABLE | HPET_TN_SETVAL | HPET_TN_32BIT;
-	hpet_writel(cfg, HPET_T1_CFG);
-
-	return;
+	hpet_t1_cmp = cnt;
 }
 
 /*
diff --git a/arch/x86_64/kernel/traps.c b/arch/x86_64/kernel/traps.c
index b5e09e6b5536..bf337f493189 100644
--- a/arch/x86_64/kernel/traps.c
+++ b/arch/x86_64/kernel/traps.c
@@ -428,19 +428,6 @@ static void __kprobes do_trap(int trapnr, int signr, char *str,
 {
 	conditional_sti(regs);
 
-#ifdef CONFIG_CHECKING
-       { 
-               unsigned long gs; 
-               struct x8664_pda *pda = cpu_pda + safe_smp_processor_id(); 
-               rdmsrl(MSR_GS_BASE, gs); 
-               if (gs != (unsigned long)pda) { 
-                       wrmsrl(MSR_GS_BASE, pda); 
-                       printk("%s: wrong gs %lx expected %p rip %lx\n", str, gs, pda,
-			      regs->rip);
-               }
-       }
-#endif
-
 	if (user_mode(regs)) {
 		struct task_struct *tsk = current;
 
@@ -513,20 +500,6 @@ asmlinkage void __kprobes do_general_protection(struct pt_regs * regs,
 {
 	conditional_sti(regs);
 
-#ifdef CONFIG_CHECKING
-       { 
-               unsigned long gs; 
-               struct x8664_pda *pda = cpu_pda + safe_smp_processor_id(); 
-               rdmsrl(MSR_GS_BASE, gs); 
-               if (gs != (unsigned long)pda) { 
-                       wrmsrl(MSR_GS_BASE, pda); 
-		       oops_in_progress++;
-                       printk("general protection handler: wrong gs %lx expected %p\n", gs, pda);
-		       oops_in_progress--;
-               }
-       }
-#endif
-
 	if (user_mode(regs)) {
 		struct task_struct *tsk = current;
 
@@ -665,19 +638,6 @@ asmlinkage void __kprobes do_debug(struct pt_regs * regs,
 	struct task_struct *tsk = current;
 	siginfo_t info;
 
-#ifdef CONFIG_CHECKING
-       { 
-	       /* RED-PEN interaction with debugger - could destroy gs */
-               unsigned long gs; 
-               struct x8664_pda *pda = cpu_pda + safe_smp_processor_id(); 
-               rdmsrl(MSR_GS_BASE, gs); 
-               if (gs != (unsigned long)pda) { 
-                       wrmsrl(MSR_GS_BASE, pda); 
-                       printk("debug handler: wrong gs %lx expected %p\n", gs, pda);
-               }
-       }
-#endif
-
 	get_debugreg(condition, 6);
 
 	if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code,
@@ -888,6 +848,10 @@ asmlinkage void __attribute__((weak)) smp_thermal_interrupt(void)
 {
 }
 
+asmlinkage void __attribute__((weak)) mce_threshold_interrupt(void)
+{
+}
+
 /*
  *  'math_state_restore()' saves the current math information in the
  * old math state array, and gets the new ones from the current task
diff --git a/arch/x86_64/kernel/vmlinux.lds.S b/arch/x86_64/kernel/vmlinux.lds.S
index 6dd642cad2ef..58b19215b4b3 100644
--- a/arch/x86_64/kernel/vmlinux.lds.S
+++ b/arch/x86_64/kernel/vmlinux.lds.S
@@ -50,7 +50,7 @@ SECTIONS
 	*(.bss.page_aligned)	
 	*(.bss)
 	}
-  __bss_end = .;
+  __bss_stop = .;
 
   . = ALIGN(PAGE_SIZE);
   . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
diff --git a/arch/x86_64/kernel/x8664_ksyms.c b/arch/x86_64/kernel/x8664_ksyms.c
index fd99ddd009bc..4a54221e10bc 100644
--- a/arch/x86_64/kernel/x8664_ksyms.c
+++ b/arch/x86_64/kernel/x8664_ksyms.c
@@ -203,3 +203,6 @@ EXPORT_SYMBOL(flush_tlb_page);
 #endif
 
 EXPORT_SYMBOL(cpu_khz);
+
+EXPORT_SYMBOL(load_gs_index);
+
diff --git a/arch/x86_64/lib/bitops.c b/arch/x86_64/lib/bitops.c
index a29fb75b33ac..95b6d9639fba 100644
--- a/arch/x86_64/lib/bitops.c
+++ b/arch/x86_64/lib/bitops.c
@@ -5,19 +5,23 @@
 #undef find_first_bit
 #undef find_next_bit
 
-/**
- * find_first_zero_bit - find the first zero bit in a memory region
- * @addr: The address to start the search at
- * @size: The maximum size to search
- *
- * Returns the bit-number of the first zero bit, not the number of the byte
- * containing a bit.
- */
-inline long find_first_zero_bit(const unsigned long * addr, unsigned long size)
+static inline long
+__find_first_zero_bit(const unsigned long * addr, unsigned long size)
 {
 	long d0, d1, d2;
 	long res;
 
+	/*
+	 * We must test the size in words, not in bits, because
+	 * otherwise incoming sizes in the range -63..-1 will not run
+	 * any scasq instructions, and then the flags used by the je
+	 * instruction will have whatever random value was in place
+	 * before.  Nobody should call us like that, but
+	 * find_next_zero_bit() does when offset and size are at the
+	 * same word and it fails to find a zero itself.
+	 */
+	size += 63;
+	size >>= 6;
 	if (!size)
 		return 0;
 	asm volatile(
@@ -30,12 +34,30 @@ inline long find_first_zero_bit(const unsigned long * addr, unsigned long size)
 		"  shlq $3,%%rdi\n"
 		"  addq %%rdi,%%rdx"
 		:"=d" (res), "=&c" (d0), "=&D" (d1), "=&a" (d2)
-		:"0" (0ULL), "1" ((size + 63) >> 6), "2" (addr), "3" (-1ULL),
-		 [addr] "r" (addr) : "memory");
+		:"0" (0ULL), "1" (size), "2" (addr), "3" (-1ULL),
+		 [addr] "S" (addr) : "memory");
+	/*
+	 * Any register would do for [addr] above, but GCC tends to
+	 * prefer rbx over rsi, even though rsi is readily available
+	 * and doesn't have to be saved.
+	 */
 	return res;
 }
 
 /**
+ * find_first_zero_bit - find the first zero bit in a memory region
+ * @addr: The address to start the search at
+ * @size: The maximum size to search
+ *
+ * Returns the bit-number of the first zero bit, not the number of the byte
+ * containing a bit.
+ */
+long find_first_zero_bit(const unsigned long * addr, unsigned long size)
+{
+	return __find_first_zero_bit (addr, size);
+}
+
+/**
  * find_next_zero_bit - find the first zero bit in a memory region
  * @addr: The address to base the search on
  * @offset: The bitnumber to start searching at
@@ -43,7 +65,7 @@ inline long find_first_zero_bit(const unsigned long * addr, unsigned long size)
  */
 long find_next_zero_bit (const unsigned long * addr, long size, long offset)
 {
-	unsigned long * p = ((unsigned long *) addr) + (offset >> 6);
+	const unsigned long * p = addr + (offset >> 6);
 	unsigned long set = 0;
 	unsigned long res, bit = offset&63;
 
@@ -63,8 +85,8 @@ long find_next_zero_bit (const unsigned long * addr, long size, long offset)
 	/*
 	 * No zero yet, search remaining full words for a zero
 	 */
-	res = find_first_zero_bit ((const unsigned long *)p,
-				   size - 64 * (p - (unsigned long *) addr));
+	res = __find_first_zero_bit (p, size - 64 * (p - addr));
+
 	return (offset + set + res);
 }
 
@@ -74,6 +96,19 @@ __find_first_bit(const unsigned long * addr, unsigned long size)
 	long d0, d1;
 	long res;
 
+	/*
+	 * We must test the size in words, not in bits, because
+	 * otherwise incoming sizes in the range -63..-1 will not run
+	 * any scasq instructions, and then the flags used by the jz
+	 * instruction will have whatever random value was in place
+	 * before.  Nobody should call us like that, but
+	 * find_next_bit() does when offset and size are at the same
+	 * word and it fails to find a one itself.
+	 */
+	size += 63;
+	size >>= 6;
+	if (!size)
+		return 0;
 	asm volatile(
 		"   repe; scasq\n"
 		"   jz 1f\n"
@@ -83,8 +118,7 @@ __find_first_bit(const unsigned long * addr, unsigned long size)
 		"   shlq $3,%%rdi\n"
 		"   addq %%rdi,%%rax"
 		:"=a" (res), "=&c" (d0), "=&D" (d1)
-		:"0" (0ULL),
-		 "1" ((size + 63) >> 6), "2" (addr),
+		:"0" (0ULL), "1" (size), "2" (addr),
 		 [addr] "r" (addr) : "memory");
 	return res;
 }
diff --git a/arch/x86_64/lib/clear_page.S b/arch/x86_64/lib/clear_page.S
index 30a9da458c15..43d9fa136180 100644
--- a/arch/x86_64/lib/clear_page.S
+++ b/arch/x86_64/lib/clear_page.S
@@ -5,46 +5,8 @@
 	.globl clear_page
 	.p2align 4
 clear_page:
-	xorl   %eax,%eax
-	movl   $4096/64,%ecx
-	.p2align 4
-.Lloop:
-	decl	%ecx
-#define PUT(x) movq %rax,x*8(%rdi) 
-	movq %rax,(%rdi)
-	PUT(1)
-	PUT(2)
-	PUT(3)
-	PUT(4)
-	PUT(5)
-	PUT(6)
-	PUT(7)
-	leaq	64(%rdi),%rdi
-	jnz	.Lloop
-	nop
-	ret
-clear_page_end:	
-	
-	/* C stepping K8 run faster using the string instructions.
-	   It is also a lot simpler. Use this when possible */
-	
-#include <asm/cpufeature.h>
-	    	
-	.section .altinstructions,"a"
-	.align 8
-	.quad  clear_page
-	.quad  clear_page_c
-	.byte  X86_FEATURE_K8_C
-	.byte  clear_page_end-clear_page	
-	.byte  clear_page_c_end-clear_page_c
-	.previous
-
-	.section .altinstr_replacement,"ax"
-clear_page_c:
 	movl $4096/8,%ecx
 	xorl %eax,%eax
 	rep 
 	stosq
 	ret
-clear_page_c_end:
-	.previous
diff --git a/arch/x86_64/lib/copy_page.S b/arch/x86_64/lib/copy_page.S
index dd3aa47b6bf5..621a19769406 100644
--- a/arch/x86_64/lib/copy_page.S
+++ b/arch/x86_64/lib/copy_page.S
@@ -8,94 +8,7 @@
 	.globl copy_page
 	.p2align 4
 copy_page:
-	subq	$3*8,%rsp
-	movq	%rbx,(%rsp)
-	movq	%r12,1*8(%rsp)
-	movq	%r13,2*8(%rsp)
-			
-	movl	$(4096/64)-5,%ecx
-	.p2align 4
-.Loop64:	
-  	dec     %rcx
-
-	movq        (%rsi), %rax
-	movq      8 (%rsi), %rbx
-	movq     16 (%rsi), %rdx
-	movq     24 (%rsi), %r8
-	movq     32 (%rsi), %r9
-	movq     40 (%rsi), %r10
-	movq     48 (%rsi), %r11
-	movq     56 (%rsi), %r12
-
-	prefetcht0 5*64(%rsi)
-
-	movq     %rax,    (%rdi)
-	movq     %rbx,  8 (%rdi)
-	movq     %rdx, 16 (%rdi)
-	movq     %r8,  24 (%rdi)
-	movq     %r9,  32 (%rdi)
-	movq     %r10, 40 (%rdi)
-	movq     %r11, 48 (%rdi)
-	movq     %r12, 56 (%rdi)
-
-	leaq    64 (%rsi), %rsi
-	leaq    64 (%rdi), %rdi
-
-	jnz     .Loop64
-
-	movl	$5,%ecx
-	.p2align 4
-.Loop2:	
-	decl   %ecx
-
-	movq        (%rsi), %rax
-	movq      8 (%rsi), %rbx
-	movq     16 (%rsi), %rdx
-	movq     24 (%rsi), %r8
-	movq     32 (%rsi), %r9
-	movq     40 (%rsi), %r10
-	movq     48 (%rsi), %r11
-	movq     56 (%rsi), %r12
-
-	movq     %rax,    (%rdi)
-	movq     %rbx,  8 (%rdi)
-	movq     %rdx, 16 (%rdi)
-	movq     %r8,  24 (%rdi)
-	movq     %r9,  32 (%rdi)
-	movq     %r10, 40 (%rdi)
-	movq     %r11, 48 (%rdi)
-	movq     %r12, 56 (%rdi)
-	
-	leaq	64(%rdi),%rdi			
-	leaq	64(%rsi),%rsi			
-	
-	jnz	.Loop2		
-	
-	movq	(%rsp),%rbx
-	movq	1*8(%rsp),%r12
-	movq	2*8(%rsp),%r13
-	addq	$3*8,%rsp
-	ret
-	
-	/* C stepping K8 run faster using the string copy instructions.
-	   It is also a lot simpler. Use this when possible */
-
-#include <asm/cpufeature.h>		
-		
-	.section .altinstructions,"a"
-	.align 8
-	.quad  copy_page
-	.quad  copy_page_c
-	.byte  X86_FEATURE_K8_C
-	.byte  copy_page_c_end-copy_page_c
-	.byte  copy_page_c_end-copy_page_c
-	.previous
-
-	.section .altinstr_replacement,"ax"
-copy_page_c:
 	movl $4096/8,%ecx
 	rep 
 	movsq 
 	ret
-copy_page_c_end:
-	.previous
diff --git a/arch/x86_64/lib/memcpy.S b/arch/x86_64/lib/memcpy.S
index c6c46494fef5..92dd80544602 100644
--- a/arch/x86_64/lib/memcpy.S
+++ b/arch/x86_64/lib/memcpy.S
@@ -11,6 +11,8 @@
  * 
  * Output:
  * rax original destination
+ * 
+ * TODO: check best memcpy for PSC
  */	
 
  	.globl __memcpy
@@ -18,95 +20,6 @@
 	.p2align 4
 __memcpy:
 memcpy:		
-	pushq %rbx
-	movq %rdi,%rax
-
-	movl %edx,%ecx
-	shrl $6,%ecx
-	jz .Lhandle_tail
-	
-	.p2align 4
-.Lloop_64:
-	decl %ecx
-	
-	movq (%rsi),%r11
-	movq 8(%rsi),%r8
-
-	movq %r11,(%rdi)
-	movq %r8,1*8(%rdi)
-
-	movq 2*8(%rsi),%r9
-	movq 3*8(%rsi),%r10
-
-	movq %r9,2*8(%rdi)
-	movq %r10,3*8(%rdi)
-		
-	movq 4*8(%rsi),%r11
-	movq 5*8(%rsi),%r8
-
-	movq %r11,4*8(%rdi)
-	movq %r8,5*8(%rdi)
-
-	movq 6*8(%rsi),%r9
-	movq 7*8(%rsi),%r10
-
-	movq %r9,6*8(%rdi)
-	movq %r10,7*8(%rdi)
-
-	leaq 64(%rsi),%rsi
-	leaq 64(%rdi),%rdi
-	jnz  .Lloop_64
-
-.Lhandle_tail:
-	movl %edx,%ecx
-	andl $63,%ecx
-	shrl $3,%ecx
-	jz   .Lhandle_7
-	.p2align 4
-.Lloop_8: 
-	decl %ecx
-	movq (%rsi),%r8
-	movq %r8,(%rdi) 
-	leaq 8(%rdi),%rdi
-	leaq 8(%rsi),%rsi
-	jnz  .Lloop_8
-
-.Lhandle_7:
-	movl %edx,%ecx
-	andl $7,%ecx
-	jz .Lende
-	.p2align 4
-.Lloop_1:
-	movb (%rsi),%r8b
-	movb %r8b,(%rdi) 
-	incq %rdi
-	incq %rsi
-	decl %ecx
-	jnz .Lloop_1
-	
-.Lende: 	
-	popq %rbx
-	ret
-.Lfinal:
-	
-	/* C stepping K8 run faster using the string copy instructions.
-	   It is also a lot simpler. Use this when possible */
-	
-	.section .altinstructions,"a"
-	.align 8
-	.quad  memcpy
-	.quad  memcpy_c
-	.byte  X86_FEATURE_K8_C
-	.byte  .Lfinal-memcpy
-	.byte  memcpy_c_end-memcpy_c	
-	.previous
-
-	.section .altinstr_replacement,"ax"
- /* rdi	destination
-  * rsi source
-  * rdx count
-  */			
-memcpy_c:
 	movq %rdi,%rax
 	movl %edx,%ecx
 	shrl $3,%ecx
@@ -117,5 +30,3 @@ memcpy_c:
 	rep
 	movsb
 	ret
-memcpy_c_end:
-	.previous
diff --git a/arch/x86_64/lib/memset.S b/arch/x86_64/lib/memset.S
index 4b4c40638640..2aa48f24ed1e 100644
--- a/arch/x86_64/lib/memset.S
+++ b/arch/x86_64/lib/memset.S
@@ -13,98 +13,6 @@
 	.p2align 4
 memset:	
 __memset:
-	movq %rdi,%r10
-	movq %rdx,%r11
-
-	/* expand byte value  */
-	movzbl %sil,%ecx
-	movabs $0x0101010101010101,%rax
-	mul    %rcx		/* with rax, clobbers rdx */
-
-	/* align dst */
-	movl  %edi,%r9d		
-	andl  $7,%r9d	
-	jnz  .Lbad_alignment
-.Lafter_bad_alignment:
-	
-	movl %r11d,%ecx
-	shrl $6,%ecx
-	jz	 .Lhandle_tail
-
-	.p2align 4
-.Lloop_64:	
-	decl   %ecx
-	movq  %rax,(%rdi) 
-	movq  %rax,8(%rdi) 
-	movq  %rax,16(%rdi) 
-	movq  %rax,24(%rdi) 
-	movq  %rax,32(%rdi) 
-	movq  %rax,40(%rdi) 
-	movq  %rax,48(%rdi) 
-	movq  %rax,56(%rdi) 
-	leaq  64(%rdi),%rdi
-	jnz    .Lloop_64
-
-	/* Handle tail in loops. The loops should be faster than hard
-	   to predict jump tables. */ 
-	.p2align 4	   
-.Lhandle_tail:
-	movl	%r11d,%ecx
-	andl    $63&(~7),%ecx
-	jz 		.Lhandle_7
-	shrl	$3,%ecx
-	.p2align 4
-.Lloop_8:
-	decl   %ecx
-	movq  %rax,(%rdi)
-	leaq  8(%rdi),%rdi
-	jnz    .Lloop_8
-
-.Lhandle_7:
-	movl	%r11d,%ecx
-	andl	$7,%ecx
-	jz      .Lende
-	.p2align 4
-.Lloop_1:
-	decl    %ecx
-	movb 	%al,(%rdi)
-	leaq	1(%rdi),%rdi
-	jnz     .Lloop_1
-	
-.Lende:	
-	movq	%r10,%rax
-	ret
-
-.Lbad_alignment:
-	cmpq $7,%r11
-	jbe	.Lhandle_7
-	movq %rax,(%rdi)	/* unaligned store */
-	movq $8,%r8			
-	subq %r9,%r8 
-	addq %r8,%rdi
-	subq %r8,%r11
-	jmp .Lafter_bad_alignment
-
-	/* C stepping K8 run faster using the string instructions.
-	   It is also a lot simpler. Use this when possible */
-
-#include <asm/cpufeature.h>	
-		
-	.section .altinstructions,"a"
-	.align 8
-	.quad  memset
-	.quad  memset_c
-	.byte  X86_FEATURE_K8_C
-	.byte  memset_c_end-memset_c
-	.byte  memset_c_end-memset_c
-	.previous
-
-	.section .altinstr_replacement,"ax"
- /* rdi	destination
-  * rsi value
-  * rdx count
-  */			
-memset_c:	
 	movq %rdi,%r9
 	movl %edx,%r8d
 	andl $7,%r8d		
@@ -121,5 +29,3 @@ memset_c:
 	stosb
 	movq %r9,%rax
 	ret
-memset_c_end:
-	.previous
diff --git a/arch/x86_64/mm/fault.c b/arch/x86_64/mm/fault.c
index b75b872ec154..3a63707a698b 100644
--- a/arch/x86_64/mm/fault.c
+++ b/arch/x86_64/mm/fault.c
@@ -308,18 +308,6 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
 	unsigned long flags;
 	siginfo_t info;
 
-#ifdef CONFIG_CHECKING
-	{ 
-		unsigned long gs; 
-		struct x8664_pda *pda = cpu_pda + stack_smp_processor_id(); 
-		rdmsrl(MSR_GS_BASE, gs); 
-		if (gs != (unsigned long)pda) { 
-			wrmsrl(MSR_GS_BASE, pda); 
-			printk("page_fault: wrong gs %lx expected %p\n", gs, pda);
-		}
-	}
-#endif
-
 	/* get the address */
 	__asm__("movq %%cr2,%0":"=r" (address));
 	if (notify_die(DIE_PAGE_FAULT, "page fault", regs, error_code, 14,
@@ -571,3 +559,10 @@ do_sigbus:
 	force_sig_info(SIGBUS, &info, tsk);
 	return;
 }
+
+static int __init enable_pagefaulttrace(char *str)
+{
+	page_fault_trace = 1;
+	return 0;
+}
+__setup("pagefaulttrace", enable_pagefaulttrace);
diff --git a/arch/x86_64/mm/init.c b/arch/x86_64/mm/init.c
index e60a1a848de8..286f6a624c3a 100644
--- a/arch/x86_64/mm/init.c
+++ b/arch/x86_64/mm/init.c
@@ -22,6 +22,7 @@
 #include <linux/pagemap.h>
 #include <linux/bootmem.h>
 #include <linux/proc_fs.h>
+#include <linux/pci.h>
 
 #include <asm/processor.h>
 #include <asm/system.h>
@@ -36,16 +37,13 @@
 #include <asm/mmu_context.h>
 #include <asm/proto.h>
 #include <asm/smp.h>
+#include <asm/sections.h>
 
 #ifndef Dprintk
 #define Dprintk(x...)
 #endif
 
-#ifdef CONFIG_GART_IOMMU
-extern int swiotlb;
-#endif
-
-extern char _stext[];
+static unsigned long dma_reserve __initdata;
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
@@ -86,9 +84,6 @@ void show_mem(void)
 
 /* References to section boundaries */
 
-extern char _text, _etext, _edata, __bss_start, _end[];
-extern char __init_begin, __init_end;
-
 int after_bootmem;
 
 static void *spp_getpage(void)
@@ -308,42 +303,81 @@ void __init init_memory_mapping(unsigned long start, unsigned long end)
 	       table_end<<PAGE_SHIFT);
 }
 
-extern struct x8664_pda cpu_pda[NR_CPUS];
+void __cpuinit zap_low_mappings(int cpu)
+{
+	if (cpu == 0) {
+		pgd_t *pgd = pgd_offset_k(0UL);
+		pgd_clear(pgd);
+	} else {
+		/*
+		 * For AP's, zap the low identity mappings by changing the cr3
+		 * to init_level4_pgt and doing local flush tlb all
+		 */
+		asm volatile("movq %0,%%cr3" :: "r" (__pa_symbol(&init_level4_pgt)));
+	}
+	__flush_tlb_all();
+}
 
-/* Assumes all CPUs still execute in init_mm */
-void zap_low_mappings(void)
+/* Compute zone sizes for the DMA and DMA32 zones in a node. */
+__init void
+size_zones(unsigned long *z, unsigned long *h,
+	   unsigned long start_pfn, unsigned long end_pfn)
 {
-	pgd_t *pgd = pgd_offset_k(0UL);
-	pgd_clear(pgd);
-	flush_tlb_all();
+ 	int i;
+ 	unsigned long w;
+
+ 	for (i = 0; i < MAX_NR_ZONES; i++)
+ 		z[i] = 0;
+
+ 	if (start_pfn < MAX_DMA_PFN)
+ 		z[ZONE_DMA] = MAX_DMA_PFN - start_pfn;
+ 	if (start_pfn < MAX_DMA32_PFN) {
+ 		unsigned long dma32_pfn = MAX_DMA32_PFN;
+ 		if (dma32_pfn > end_pfn)
+ 			dma32_pfn = end_pfn;
+ 		z[ZONE_DMA32] = dma32_pfn - start_pfn;
+ 	}
+ 	z[ZONE_NORMAL] = end_pfn - start_pfn;
+
+ 	/* Remove lower zones from higher ones. */
+ 	w = 0;
+ 	for (i = 0; i < MAX_NR_ZONES; i++) {
+ 		if (z[i])
+ 			z[i] -= w;
+ 	        w += z[i];
+	}
+
+	/* Compute holes */
+	w = 0;
+	for (i = 0; i < MAX_NR_ZONES; i++) {
+		unsigned long s = w;
+		w += z[i];
+		h[i] = e820_hole_size(s, w);
+	}
+
+	/* Add the space pace needed for mem_map to the holes too. */
+	for (i = 0; i < MAX_NR_ZONES; i++)
+		h[i] += (z[i] * sizeof(struct page)) / PAGE_SIZE;
+
+	/* The 16MB DMA zone has the kernel and other misc mappings.
+ 	   Account them too */
+	if (h[ZONE_DMA]) {
+		h[ZONE_DMA] += dma_reserve;
+		if (h[ZONE_DMA] >= z[ZONE_DMA]) {
+			printk(KERN_WARNING
+				"Kernel too large and filling up ZONE_DMA?\n");
+			h[ZONE_DMA] = z[ZONE_DMA];
+		}
+	}
 }
 
 #ifndef CONFIG_NUMA
 void __init paging_init(void)
 {
-	{
-		unsigned long zones_size[MAX_NR_ZONES];
-		unsigned long holes[MAX_NR_ZONES];
-		unsigned int max_dma;
-
-		memset(zones_size, 0, sizeof(zones_size));
-		memset(holes, 0, sizeof(holes));
-
-		max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
-
-		if (end_pfn < max_dma) {
-			zones_size[ZONE_DMA] = end_pfn;
-			holes[ZONE_DMA] = e820_hole_size(0, end_pfn);
-		} else {
-			zones_size[ZONE_DMA] = max_dma;
-			holes[ZONE_DMA] = e820_hole_size(0, max_dma);
-			zones_size[ZONE_NORMAL] = end_pfn - max_dma;
-			holes[ZONE_NORMAL] = e820_hole_size(max_dma, end_pfn);
-		}
-		free_area_init_node(0, NODE_DATA(0), zones_size,
-                        __pa(PAGE_OFFSET) >> PAGE_SHIFT, holes);
-	}
-	return;
+	unsigned long zones[MAX_NR_ZONES], holes[MAX_NR_ZONES];
+	size_zones(zones, holes, 0, end_pfn);
+	free_area_init_node(0, NODE_DATA(0), zones,
+			    __pa(PAGE_OFFSET) >> PAGE_SHIFT, holes);
 }
 #endif
 
@@ -438,19 +472,16 @@ void __init mem_init(void)
 		datasize >> 10,
 		initsize >> 10);
 
+#ifdef CONFIG_SMP
 	/*
-	 * Subtle. SMP is doing its boot stuff late (because it has to
-	 * fork idle threads) - but it also needs low mappings for the
-	 * protected-mode entry to work. We zap these entries only after
-	 * the WP-bit has been tested.
+	 * Sync boot_level4_pgt mappings with the init_level4_pgt
+	 * except for the low identity mappings which are already zapped
+	 * in init_level4_pgt. This sync-up is essential for AP's bringup
 	 */
-#ifndef CONFIG_SMP
-	zap_low_mappings();
+	memcpy(boot_level4_pgt+1, init_level4_pgt+1, (PTRS_PER_PGD-1)*sizeof(pgd_t));
 #endif
 }
 
-extern char __initdata_begin[], __initdata_end[];
-
 void free_initmem(void)
 {
 	unsigned long addr;
@@ -464,7 +495,7 @@ void free_initmem(void)
 		totalram_pages++;
 	}
 	memset(__initdata_begin, 0xba, __initdata_end - __initdata_begin);
-	printk ("Freeing unused kernel memory: %luk freed\n", (&__init_end - &__init_begin) >> 10);
+	printk ("Freeing unused kernel memory: %luk freed\n", (__init_end - __init_begin) >> 10);
 }
 
 #ifdef CONFIG_BLK_DEV_INITRD
@@ -491,6 +522,8 @@ void __init reserve_bootmem_generic(unsigned long phys, unsigned len)
 #else       		
 	reserve_bootmem(phys, len);    
 #endif
+	if (phys+len <= MAX_DMA_PFN*PAGE_SIZE)
+		dma_reserve += len / PAGE_SIZE;
 }
 
 int kern_addr_valid(unsigned long addr) 
@@ -532,10 +565,6 @@ extern int exception_trace, page_fault_trace;
 static ctl_table debug_table2[] = {
 	{ 99, "exception-trace", &exception_trace, sizeof(int), 0644, NULL,
 	  proc_dointvec },
-#ifdef CONFIG_CHECKING
-	{ 100, "page-fault-trace", &page_fault_trace, sizeof(int), 0644, NULL,
-	  proc_dointvec },
-#endif
 	{ 0, }
 }; 
 
diff --git a/arch/x86_64/mm/ioremap.c b/arch/x86_64/mm/ioremap.c
index 6972df480d2b..ecf7acb5db9b 100644
--- a/arch/x86_64/mm/ioremap.c
+++ b/arch/x86_64/mm/ioremap.c
@@ -60,7 +60,7 @@ static inline int remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned lo
 	if (address >= end)
 		BUG();
 	do {
-		pte_t * pte = pte_alloc_kernel(&init_mm, pmd, address);
+		pte_t * pte = pte_alloc_kernel(pmd, address);
 		if (!pte)
 			return -ENOMEM;
 		remap_area_pte(pte, address, end - address, address + phys_addr, flags);
@@ -105,7 +105,6 @@ static int remap_area_pages(unsigned long address, unsigned long phys_addr,
 	flush_cache_all();
 	if (address >= end)
 		BUG();
-	spin_lock(&init_mm.page_table_lock);
 	do {
 		pud_t *pud;
 		pud = pud_alloc(&init_mm, pgd, address);
@@ -119,7 +118,6 @@ static int remap_area_pages(unsigned long address, unsigned long phys_addr,
 		address = (address + PGDIR_SIZE) & PGDIR_MASK;
 		pgd++;
 	} while (address && (address < end));
-	spin_unlock(&init_mm.page_table_lock);
 	flush_tlb_all();
 	return error;
 }
diff --git a/arch/x86_64/mm/k8topology.c b/arch/x86_64/mm/k8topology.c
index 65417b040c1b..a5663e0bb01c 100644
--- a/arch/x86_64/mm/k8topology.c
+++ b/arch/x86_64/mm/k8topology.c
@@ -108,6 +108,7 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end)
 		limit >>= 16; 
 		limit <<= 24; 
 		limit |= (1<<24)-1;
+		limit++;
 
 		if (limit > end_pfn << PAGE_SHIFT)
 			limit = end_pfn << PAGE_SHIFT;
diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c
index 80a49d9bd8a7..a828a01739cc 100644
--- a/arch/x86_64/mm/numa.c
+++ b/arch/x86_64/mm/numa.c
@@ -38,38 +38,57 @@ cpumask_t node_to_cpumask[MAX_NUMNODES] __read_mostly;
 
 int numa_off __initdata;
 
-int __init compute_hash_shift(struct node *nodes, int numnodes)
+
+/*
+ * Given a shift value, try to populate memnodemap[]
+ * Returns :
+ * 1 if OK
+ * 0 if memnodmap[] too small (of shift too small)
+ * -1 if node overlap or lost ram (shift too big)
+ */
+static int __init populate_memnodemap(
+	const struct node *nodes, int numnodes, int shift)
 {
 	int i; 
-	int shift = 20;
-	unsigned long addr,maxend=0;
-	
-	for (i = 0; i < numnodes; i++)
-		if ((nodes[i].start != nodes[i].end) && (nodes[i].end > maxend))
-				maxend = nodes[i].end;
+	int res = -1;
+	unsigned long addr, end;
 
-	while ((1UL << shift) <  (maxend / NODEMAPSIZE))
-		shift++;
-
-	printk (KERN_DEBUG"Using %d for the hash shift. Max adder is %lx \n",
-			shift,maxend);
-	memset(memnodemap,0xff,sizeof(*memnodemap) * NODEMAPSIZE);
+	memset(memnodemap, 0xff, sizeof(memnodemap));
 	for (i = 0; i < numnodes; i++) {
-		if (nodes[i].start == nodes[i].end)
+		addr = nodes[i].start;
+		end = nodes[i].end;
+		if (addr >= end)
 			continue;
-		for (addr = nodes[i].start;
-		     addr < nodes[i].end;
-		     addr += (1UL << shift)) {
-			if (memnodemap[addr >> shift] != 0xff) {
-				printk(KERN_INFO
-	"Your memory is not aligned you need to rebuild your kernel "
-	"with a bigger NODEMAPSIZE shift=%d adder=%lu\n",
-					shift,addr);
+		if ((end >> shift) >= NODEMAPSIZE)
+			return 0;
+		do {
+			if (memnodemap[addr >> shift] != 0xff)
 				return -1;
-			} 
 			memnodemap[addr >> shift] = i;
-		} 
+			addr += (1 << shift);
+		} while (addr < end);
+		res = 1;
 	} 
+	return res;
+}
+
+int __init compute_hash_shift(struct node *nodes, int numnodes)
+{
+	int shift = 20;
+
+	while (populate_memnodemap(nodes, numnodes, shift + 1) >= 0)
+		shift++;
+
+	printk(KERN_DEBUG "Using %d for the hash shift.\n",
+		shift);
+
+	if (populate_memnodemap(nodes, numnodes, shift) != 1) {
+		printk(KERN_INFO
+	"Your memory is not aligned you need to rebuild your kernel "
+	"with a bigger NODEMAPSIZE shift=%d\n",
+			shift);
+		return -1;
+	}
 	return shift;
 }
 
@@ -94,7 +113,6 @@ void __init setup_node_bootmem(int nodeid, unsigned long start, unsigned long en
 	start_pfn = start >> PAGE_SHIFT;
 	end_pfn = end >> PAGE_SHIFT;
 
-	memory_present(nodeid, start_pfn, end_pfn);
 	nodedata_phys = find_e820_area(start, end, pgdat_size); 
 	if (nodedata_phys == -1L) 
 		panic("Cannot find memory pgdat in node %d\n", nodeid);
@@ -132,29 +150,14 @@ void __init setup_node_zones(int nodeid)
 	unsigned long start_pfn, end_pfn; 
 	unsigned long zones[MAX_NR_ZONES];
 	unsigned long holes[MAX_NR_ZONES];
-	unsigned long dma_end_pfn;
 
-	memset(zones, 0, sizeof(unsigned long) * MAX_NR_ZONES); 
-	memset(holes, 0, sizeof(unsigned long) * MAX_NR_ZONES);
+ 	start_pfn = node_start_pfn(nodeid);
+ 	end_pfn = node_end_pfn(nodeid);
 
-	start_pfn = node_start_pfn(nodeid);
-	end_pfn = node_end_pfn(nodeid);
+	Dprintk(KERN_INFO "setting up node %d %lx-%lx\n",
+		nodeid, start_pfn, end_pfn);
 
-	Dprintk(KERN_INFO "setting up node %d %lx-%lx\n", nodeid, start_pfn, end_pfn);
-	
-	/* All nodes > 0 have a zero length zone DMA */ 
-	dma_end_pfn = __pa(MAX_DMA_ADDRESS) >> PAGE_SHIFT; 
-	if (start_pfn < dma_end_pfn) { 
-		zones[ZONE_DMA] = dma_end_pfn - start_pfn;
-		holes[ZONE_DMA] = e820_hole_size(start_pfn, dma_end_pfn);
-		zones[ZONE_NORMAL] = end_pfn - dma_end_pfn; 
-		holes[ZONE_NORMAL] = e820_hole_size(dma_end_pfn, end_pfn);
-
-	} else { 
-		zones[ZONE_NORMAL] = end_pfn - start_pfn; 
-		holes[ZONE_NORMAL] = e820_hole_size(start_pfn, end_pfn);
-	} 
-    
+	size_zones(zones, holes, start_pfn, end_pfn);
 	free_area_init_node(nodeid, NODE_DATA(nodeid), zones,
 			    start_pfn, holes);
 } 
@@ -167,18 +170,16 @@ void __init numa_init_array(void)
 	   mapping. To avoid this fill in the mapping for all possible
 	   CPUs, as the number of CPUs is not known yet. 
 	   We round robin the existing nodes. */
-	rr = 0;
+	rr = first_node(node_online_map);
 	for (i = 0; i < NR_CPUS; i++) {
 		if (cpu_to_node[i] != NUMA_NO_NODE)
 			continue;
+ 		numa_set_node(i, rr);
 		rr = next_node(rr, node_online_map);
 		if (rr == MAX_NUMNODES)
 			rr = first_node(node_online_map);
-		cpu_to_node[i] = rr;
-		rr++; 
 	}
 
-	set_bit(0, &node_to_cpumask[cpu_to_node(0)]);
 }
 
 #ifdef CONFIG_NUMA_EMU
@@ -207,8 +208,6 @@ static int numa_emulation(unsigned long start_pfn, unsigned long end_pfn)
  		if (i == numa_fake-1)
  			sz = (end_pfn<<PAGE_SHIFT) - nodes[i].start;
  		nodes[i].end = nodes[i].start + sz;
- 		if (i != numa_fake-1)
- 			nodes[i].end--;
  		printk(KERN_INFO "Faking node %d at %016Lx-%016Lx (%LuMB)\n",
  		       i,
  		       nodes[i].start, nodes[i].end,
@@ -259,18 +258,22 @@ void __init numa_initmem_init(unsigned long start_pfn, unsigned long end_pfn)
 	nodes_clear(node_online_map);
 	node_set_online(0);
 	for (i = 0; i < NR_CPUS; i++)
-		cpu_to_node[i] = 0;
+		numa_set_node(i, 0);
 	node_to_cpumask[0] = cpumask_of_cpu(0);
 	setup_node_bootmem(0, start_pfn << PAGE_SHIFT, end_pfn << PAGE_SHIFT);
 }
 
 __cpuinit void numa_add_cpu(int cpu)
 {
-	/* BP is initialized elsewhere */
-	if (cpu) 
-		set_bit(cpu, &node_to_cpumask[cpu_to_node(cpu)]);
+	set_bit(cpu, &node_to_cpumask[cpu_to_node(cpu)]);
 } 
 
+void __cpuinit numa_set_node(int cpu, int node)
+{
+	cpu_pda[cpu].nodenumber = node;
+	cpu_to_node[cpu] = node;
+}
+
 unsigned long __init numa_free_all_bootmem(void) 
 { 
 	int i;
@@ -281,9 +284,26 @@ unsigned long __init numa_free_all_bootmem(void)
 	return pages;
 } 
 
+#ifdef CONFIG_SPARSEMEM
+static void __init arch_sparse_init(void)
+{
+	int i;
+
+	for_each_online_node(i)
+		memory_present(i, node_start_pfn(i), node_end_pfn(i));
+
+	sparse_init();
+}
+#else
+#define arch_sparse_init() do {} while (0)
+#endif
+
 void __init paging_init(void)
 { 
 	int i;
+
+	arch_sparse_init();
+
 	for_each_online_node(i) {
 		setup_node_zones(i); 
 	}
diff --git a/arch/x86_64/mm/pageattr.c b/arch/x86_64/mm/pageattr.c
index 94862e1ec032..b90e8fe9eeb0 100644
--- a/arch/x86_64/mm/pageattr.c
+++ b/arch/x86_64/mm/pageattr.c
@@ -220,8 +220,6 @@ void global_flush_tlb(void)
 	down_read(&init_mm.mmap_sem);
 	df = xchg(&df_list, NULL);
 	up_read(&init_mm.mmap_sem);
-	if (!df)
-		return;
 	flush_map((df && !df->next) ? df->address : 0);
 	for (; df; df = next_df) { 
 		next_df = df->next;
diff --git a/arch/x86_64/mm/srat.c b/arch/x86_64/mm/srat.c
index 4b2e844c15a7..33340bd1e328 100644
--- a/arch/x86_64/mm/srat.c
+++ b/arch/x86_64/mm/srat.c
@@ -71,8 +71,6 @@ static __init void cutoff_node(int i, unsigned long start, unsigned long end)
 			nd->start = nd->end;
 	}
 	if (nd->end > end) {
-		if (!(end & 0xfff))
-			end--;
 		nd->end = end;
 		if (nd->start > nd->end)
 			nd->start = nd->end;
@@ -166,8 +164,6 @@ acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma)
 		if (nd->end < end)
 			nd->end = end;
 	}
-	if (!(nd->end & 0xfff))
-		nd->end--;
 	printk(KERN_INFO "SRAT: Node %u PXM %u %Lx-%Lx\n", node, pxm,
 	       nd->start, nd->end);
 }
@@ -203,7 +199,7 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end)
 		if (cpu_to_node[i] == NUMA_NO_NODE)
 			continue;
 		if (!node_isset(cpu_to_node[i], nodes_parsed))
-			cpu_to_node[i] = NUMA_NO_NODE; 
+			numa_set_node(i, NUMA_NO_NODE);
 	}
 	numa_init_array();
 	return 0;
diff --git a/arch/x86_64/oprofile/Kconfig b/arch/x86_64/oprofile/Kconfig
index 5ade19801b97..d8a84088471a 100644
--- a/arch/x86_64/oprofile/Kconfig
+++ b/arch/x86_64/oprofile/Kconfig
@@ -1,7 +1,3 @@
-
-menu "Profiling support"
-	depends on EXPERIMENTAL
-
 config PROFILING
 	bool "Profiling support (EXPERIMENTAL)"
 	help
@@ -19,5 +15,3 @@ config OPROFILE
 
 	  If unsure, say N.
 
-endmenu
-
diff --git a/arch/xtensa/kernel/pci-dma.c b/arch/xtensa/kernel/pci-dma.c
index 84fde258cf85..1ff82268e8ea 100644
--- a/arch/xtensa/kernel/pci-dma.c
+++ b/arch/xtensa/kernel/pci-dma.c
@@ -29,7 +29,7 @@
  */
 
 void *
-dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, int gfp)
+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
 {
 	void *ret;
 
diff --git a/arch/xtensa/kernel/pci.c b/arch/xtensa/kernel/pci.c
index 09887c96e9a1..de19501aa809 100644
--- a/arch/xtensa/kernel/pci.c
+++ b/arch/xtensa/kernel/pci.c
@@ -402,8 +402,8 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 	__pci_mmap_set_flags(dev, vma, mmap_state);
 	__pci_mmap_set_pgprot(dev, vma, mmap_state, write_combine);
 
-	ret = io_remap_page_range(vma, vma->vm_start, vma->vm_pgoff<<PAGE_SHIFT,
-			       vma->vm_end - vma->vm_start, vma->vm_page_prot);
+	ret = io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+			         vma->vm_end - vma->vm_start,vma->vm_page_prot);
 
 	return ret;
 }
diff --git a/arch/xtensa/kernel/platform.c b/arch/xtensa/kernel/platform.c
index cf1362784443..a17930747f20 100644
--- a/arch/xtensa/kernel/platform.c
+++ b/arch/xtensa/kernel/platform.c
@@ -18,6 +18,7 @@
 #include <linux/time.h>
 #include <asm/platform.h>
 #include <asm/timex.h>
+#include <asm/param.h>		/* HZ */
 
 #define _F(r,f,a,b)							\
 	r __platform_##f a b;                                   	\
@@ -39,7 +40,7 @@ _F(int,  pcibios_fixup, (void), { return 0; });
 _F(int, get_rtc_time, (time_t* t), { return 0; });
 _F(int, set_rtc_time, (time_t t), { return 0; });
 
-#if CONFIG_XTENSA_CALIBRATE_CCOUNT
+#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
 _F(void, calibrate_ccount, (void),
 {
   printk ("ERROR: Cannot calibrate cpu frequency! Assuming 100MHz.\n");
diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c
index c83bb0d41787..6a44b54ae817 100644
--- a/arch/xtensa/kernel/process.c
+++ b/arch/xtensa/kernel/process.c
@@ -96,8 +96,9 @@ void cpu_idle(void)
 	while (1) {
 		while (!need_resched())
 			platform_idle();
-		preempt_enable();
+		preempt_enable_no_resched();
 		schedule();
+		preempt_disable();
 	}
 }
 
@@ -457,7 +458,7 @@ int
 dump_task_fpu(struct pt_regs *regs, struct task_struct *task, elf_fpregset_t *r)
 {
 /* see asm/coprocessor.h for this magic number 16 */
-#if TOTAL_CPEXTRA_SIZE > 16
+#if XTENSA_CP_EXTRA_SIZE > 16
 	do_save_fpregs (r, regs, task);
 
 	/*  For now, bit 16 means some extra state may be present:  */
diff --git a/arch/xtensa/kernel/ptrace.c b/arch/xtensa/kernel/ptrace.c
index 2659efdd4e99..ab5c4c65b5c4 100644
--- a/arch/xtensa/kernel/ptrace.c
+++ b/arch/xtensa/kernel/ptrace.c
@@ -45,58 +45,10 @@ void ptrace_disable(struct task_struct *child)
 	/* Nothing to do.. */
 }
 
-int sys_ptrace(long request, long pid, long addr, long data)
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
-	struct task_struct *child;
 	int ret = -EPERM;
 
-	lock_kernel();
-
-#if 0
-	if ((int)request != 1)
-	printk("ptrace(r=%d,pid=%d,addr=%08lx,data=%08lx)\n",
-	       (int) request, (int) pid, (unsigned long) addr,
-	       (unsigned long) data);
-#endif
-
-	if (request == PTRACE_TRACEME) {
-
-		/* Are we already being traced? */
-
-		if (current->ptrace & PT_PTRACED)
-			goto out;
-
-		if ((ret = security_ptrace(current->parent, current)))
-			goto out;
-
-		/* Set the ptrace bit in the process flags. */
-
-		current->ptrace |= PT_PTRACED;
-		ret = 0;
-		goto out;
-	}
-
-	ret = -ESRCH;
-	read_lock(&tasklist_lock);
-	child = find_task_by_pid(pid);
-	if (child)
-		get_task_struct(child);
-	read_unlock(&tasklist_lock);
-	if (!child)
-		goto out;
-
-	ret = -EPERM;
-	if (pid == 1)		/* you may not mess with init */
-		goto out;
-
-	if (request == PTRACE_ATTACH) {
-		ret = ptrace_attach(child);
-		goto out_tsk;
-	}
-
-	if ((ret = ptrace_check_attach(child, request == PTRACE_KILL)) < 0)
-		goto out_tsk;
-
 	switch (request) {
 	case PTRACE_PEEKTEXT: /* read word at location addr. */
 	case PTRACE_PEEKDATA:
@@ -375,10 +327,7 @@ int sys_ptrace(long request, long pid, long addr, long data)
 		ret = ptrace_request(child, request, addr, data);
 		goto out;
 	}
-out_tsk:
-	put_task_struct(child);
-out:
-	unlock_kernel();
+ out:
 	return ret;
 }
 
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index 1f5bf5d624e4..513ed8d67766 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -304,7 +304,7 @@ void __init setup_arch(char **cmdline_p)
 # endif
 #endif
 
-#if CONFIG_PCI
+#ifdef CONFIG_PCI
 	platform_pcibios_init();
 #endif
 }
diff --git a/arch/xtensa/kernel/signal.c b/arch/xtensa/kernel/signal.c
index dc42cede9394..e252b61e45a5 100644
--- a/arch/xtensa/kernel/signal.c
+++ b/arch/xtensa/kernel/signal.c
@@ -182,7 +182,7 @@ restore_cpextra (struct _cpstate *buf)
 
 	struct task_struct *tsk = current;
 	release_all_cp(tsk);
-	return __copy_from_user(tsk->thread.cpextra, buf, TOTAL_CPEXTRA_SIZE);
+	return __copy_from_user(tsk->thread.cpextra, buf, XTENSA_CP_EXTRA_SIZE);
 #endif
 	return 0;
 }
diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c
index 1ac7d5ce7456..cb6e38ed2b1d 100644
--- a/arch/xtensa/kernel/time.c
+++ b/arch/xtensa/kernel/time.c
@@ -29,9 +29,6 @@
 
 extern volatile unsigned long wall_jiffies;
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-EXPORT_SYMBOL(jiffies_64);
-
 spinlock_t rtc_lock = SPIN_LOCK_UNLOCKED;
 EXPORT_SYMBOL(rtc_lock);
 
@@ -68,7 +65,7 @@ void __init time_init(void)
 	 * speed for the CALIBRATE.
 	 */
 
-#if CONFIG_XTENSA_CALIBRATE_CCOUNT
+#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
 	printk("Calibrating CPU frequency ");
 	platform_calibrate_ccount();
 	printk("%d.%02d MHz\n", (int)ccount_per_jiffy/(1000000/HZ),
diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c
index 56aace84aaeb..5a91d6c9e66d 100644
--- a/arch/xtensa/mm/init.c
+++ b/arch/xtensa/mm/init.c
@@ -239,7 +239,7 @@ void __init mem_init(void)
 	high_memory = (void *) __va(max_mapnr << PAGE_SHIFT);
 	highmemsize = 0;
 
-#if CONFIG_HIGHMEM
+#ifdef CONFIG_HIGHMEM
 #error HIGHGMEM not implemented in init.c
 #endif
 
diff --git a/arch/xtensa/platform-iss/network.c b/arch/xtensa/platform-iss/network.c
index 498d7dced1f4..0dc55cc8691b 100644
--- a/arch/xtensa/platform-iss/network.c
+++ b/arch/xtensa/platform-iss/network.c
@@ -33,6 +33,7 @@
 #include <linux/ethtool.h>
 #include <linux/rtnetlink.h>
 #include <linux/timer.h>
+#include <linux/platform_device.h>
 
 #include <xtensa/simcall.h>
 
@@ -610,46 +611,15 @@ static int iss_net_change_mtu(struct net_device *dev, int new_mtu)
 	return -EINVAL;
 }
 
-static int iss_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-{
-#if 0
-	static const struct ethtool_drvinfo info = {
-		.cmd     = ETHTOOL_GDRVINFO,
-		.driver  = DRIVER_NAME,
-		.version = "42",
-	};
-	void *useraddr;
-	u32 ethcmd;
-
-	switch (cmd) {
-	case SIOCETHTOOL:
-		useraddr = ifr->ifr_data;
-		if (copy_from_user(&ethcmd, useraddr, sizeof(ethcmd)))
-			return -EFAULT;
-
-		switch (ethcmd) {
-			case ETHTOOL_GDRVINFO:
-				if (copy_to_user(useraddr, &info, sizeof(info)))
-					return -EFAULT;
-				return 0;
-			default:
-				return -EOPNOTSUPP;
-		}
-	default:
-		return -EINVAL;
-	}
-#endif
-	return -EINVAL;
-}
-
 void iss_net_user_timer_expire(unsigned long _conn)
 {
 }
 
 
-static struct device_driver iss_net_driver = {
-	.name  = DRIVER_NAME,
-	.bus   = &platform_bus_type,
+static struct platform_driver iss_net_driver = {
+	.driver = {
+		.name  = DRIVER_NAME,
+	},
 };
 
 static int driver_registered;
@@ -700,7 +670,7 @@ static int iss_net_configure(int index, char *init)
 	/* sysfs register */
 
 	if (!driver_registered) {
-		driver_register(&iss_net_driver);
+		platform_driver_register(&iss_net_driver);
 		driver_registered = 1;
 	}
 
@@ -729,7 +699,6 @@ static int iss_net_configure(int index, char *init)
 	dev->tx_timeout = iss_net_tx_timeout;
 	dev->set_mac_address = iss_net_set_mac;
 	dev->change_mtu = iss_net_change_mtu;
-	dev->do_ioctl = iss_net_ioctl;
 	dev->watchdog_timeo = (HZ >> 1);
 	dev->irq = -1;