summaryrefslogtreecommitdiff
path: root/drivers/acpi/acpica/evregion.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/acpi/acpica/evregion.c')
-rw-r--r--drivers/acpi/acpica/evregion.c584
1 files changed, 52 insertions, 532 deletions
diff --git a/drivers/acpi/acpica/evregion.c b/drivers/acpi/acpica/evregion.c
index 0cc6a16fedc7..6555e350fc1f 100644
--- a/drivers/acpi/acpica/evregion.c
+++ b/drivers/acpi/acpica/evregion.c
@@ -1,11 +1,11 @@
/******************************************************************************
*
- * Module Name: evregion - ACPI address_space (op_region) handler dispatch
+ * Module Name: evregion - Operation Region support
*
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2012, Intel Corp.
+ * Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -50,10 +50,9 @@
#define _COMPONENT ACPI_EVENTS
ACPI_MODULE_NAME("evregion")
+extern u8 acpi_gbl_default_address_spaces[];
+
/* Local prototypes */
-static u8
-acpi_ev_has_default_handler(struct acpi_namespace_node *node,
- acpi_adr_space_type space_id);
static void acpi_ev_orphan_ec_reg_method(void);
@@ -61,135 +60,6 @@ static acpi_status
acpi_ev_reg_run(acpi_handle obj_handle,
u32 level, void *context, void **return_value);
-static acpi_status
-acpi_ev_install_handler(acpi_handle obj_handle,
- u32 level, void *context, void **return_value);
-
-/* These are the address spaces that will get default handlers */
-
-#define ACPI_NUM_DEFAULT_SPACES 4
-
-static u8 acpi_gbl_default_address_spaces[ACPI_NUM_DEFAULT_SPACES] = {
- ACPI_ADR_SPACE_SYSTEM_MEMORY,
- ACPI_ADR_SPACE_SYSTEM_IO,
- ACPI_ADR_SPACE_PCI_CONFIG,
- ACPI_ADR_SPACE_DATA_TABLE
-};
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ev_install_region_handlers
- *
- * PARAMETERS: None
- *
- * RETURN: Status
- *
- * DESCRIPTION: Installs the core subsystem default address space handlers.
- *
- ******************************************************************************/
-
-acpi_status acpi_ev_install_region_handlers(void)
-{
- acpi_status status;
- u32 i;
-
- ACPI_FUNCTION_TRACE(ev_install_region_handlers);
-
- status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- /*
- * All address spaces (PCI Config, EC, SMBus) are scope dependent and
- * registration must occur for a specific device.
- *
- * In the case of the system memory and IO address spaces there is
- * currently no device associated with the address space. For these we
- * use the root.
- *
- * We install the default PCI config space handler at the root so that
- * this space is immediately available even though the we have not
- * enumerated all the PCI Root Buses yet. This is to conform to the ACPI
- * specification which states that the PCI config space must be always
- * available -- even though we are nowhere near ready to find the PCI root
- * buses at this point.
- *
- * NOTE: We ignore AE_ALREADY_EXISTS because this means that a handler
- * has already been installed (via acpi_install_address_space_handler).
- * Similar for AE_SAME_HANDLER.
- */
- for (i = 0; i < ACPI_NUM_DEFAULT_SPACES; i++) {
- status = acpi_ev_install_space_handler(acpi_gbl_root_node,
- acpi_gbl_default_address_spaces
- [i],
- ACPI_DEFAULT_HANDLER,
- NULL, NULL);
- switch (status) {
- case AE_OK:
- case AE_SAME_HANDLER:
- case AE_ALREADY_EXISTS:
-
- /* These exceptions are all OK */
-
- status = AE_OK;
- break;
-
- default:
-
- goto unlock_and_exit;
- }
- }
-
- unlock_and_exit:
- (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
- return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ev_has_default_handler
- *
- * PARAMETERS: node - Namespace node for the device
- * space_id - The address space ID
- *
- * RETURN: TRUE if default handler is installed, FALSE otherwise
- *
- * DESCRIPTION: Check if the default handler is installed for the requested
- * space ID.
- *
- ******************************************************************************/
-
-static u8
-acpi_ev_has_default_handler(struct acpi_namespace_node *node,
- acpi_adr_space_type space_id)
-{
- union acpi_operand_object *obj_desc;
- union acpi_operand_object *handler_obj;
-
- /* Must have an existing internal object */
-
- obj_desc = acpi_ns_get_attached_object(node);
- if (obj_desc) {
- handler_obj = obj_desc->device.handler;
-
- /* Walk the linked list of handlers for this object */
-
- while (handler_obj) {
- if (handler_obj->address_space.space_id == space_id) {
- if (handler_obj->address_space.handler_flags &
- ACPI_ADDR_HANDLER_DEFAULT_INSTALLED) {
- return (TRUE);
- }
- }
-
- handler_obj = handler_obj->address_space.next;
- }
- }
-
- return (FALSE);
-}
-
/*******************************************************************************
*
* FUNCTION: acpi_ev_initialize_op_regions
@@ -241,91 +111,6 @@ acpi_status acpi_ev_initialize_op_regions(void)
/*******************************************************************************
*
- * FUNCTION: acpi_ev_execute_reg_method
- *
- * PARAMETERS: region_obj - Region object
- * function - Passed to _REG: On (1) or Off (0)
- *
- * RETURN: Status
- *
- * DESCRIPTION: Execute _REG method for a region
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ev_execute_reg_method(union acpi_operand_object *region_obj, u32 function)
-{
- struct acpi_evaluate_info *info;
- union acpi_operand_object *args[3];
- union acpi_operand_object *region_obj2;
- acpi_status status;
-
- ACPI_FUNCTION_TRACE(ev_execute_reg_method);
-
- region_obj2 = acpi_ns_get_secondary_object(region_obj);
- if (!region_obj2) {
- return_ACPI_STATUS(AE_NOT_EXIST);
- }
-
- if (region_obj2->extra.method_REG == NULL) {
- return_ACPI_STATUS(AE_OK);
- }
-
- /* Allocate and initialize the evaluation information block */
-
- info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_evaluate_info));
- if (!info) {
- return_ACPI_STATUS(AE_NO_MEMORY);
- }
-
- info->prefix_node = region_obj2->extra.method_REG;
- info->pathname = NULL;
- info->parameters = args;
- info->flags = ACPI_IGNORE_RETURN_VALUE;
-
- /*
- * The _REG method has two arguments:
- *
- * arg0 - Integer:
- * Operation region space ID Same value as region_obj->Region.space_id
- *
- * arg1 - Integer:
- * connection status 1 for connecting the handler, 0 for disconnecting
- * the handler (Passed as a parameter)
- */
- args[0] =
- acpi_ut_create_integer_object((u64) region_obj->region.space_id);
- if (!args[0]) {
- status = AE_NO_MEMORY;
- goto cleanup1;
- }
-
- args[1] = acpi_ut_create_integer_object((u64) function);
- if (!args[1]) {
- status = AE_NO_MEMORY;
- goto cleanup2;
- }
-
- args[2] = NULL; /* Terminate list */
-
- /* Execute the method, no return value */
-
- ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname
- (ACPI_TYPE_METHOD, info->prefix_node, NULL));
-
- status = acpi_ns_evaluate(info);
- acpi_ut_remove_reference(args[1]);
-
- cleanup2:
- acpi_ut_remove_reference(args[0]);
-
- cleanup1:
- ACPI_FREE(info);
- return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
* FUNCTION: acpi_ev_address_space_dispatch
*
* PARAMETERS: region_obj - Internal region object
@@ -709,351 +494,86 @@ acpi_ev_attach_region(union acpi_operand_object *handler_obj,
/*******************************************************************************
*
- * FUNCTION: acpi_ev_install_handler
- *
- * PARAMETERS: walk_namespace callback
- *
- * DESCRIPTION: This routine installs an address handler into objects that are
- * of type Region or Device.
- *
- * If the Object is a Device, and the device has a handler of
- * the same type then the search is terminated in that branch.
- *
- * This is because the existing handler is closer in proximity
- * to any more regions than the one we are trying to install.
- *
- ******************************************************************************/
-
-static acpi_status
-acpi_ev_install_handler(acpi_handle obj_handle,
- u32 level, void *context, void **return_value)
-{
- union acpi_operand_object *handler_obj;
- union acpi_operand_object *next_handler_obj;
- union acpi_operand_object *obj_desc;
- struct acpi_namespace_node *node;
- acpi_status status;
-
- ACPI_FUNCTION_NAME(ev_install_handler);
-
- handler_obj = (union acpi_operand_object *)context;
-
- /* Parameter validation */
-
- if (!handler_obj) {
- return (AE_OK);
- }
-
- /* Convert and validate the device handle */
-
- node = acpi_ns_validate_handle(obj_handle);
- if (!node) {
- return (AE_BAD_PARAMETER);
- }
-
- /*
- * We only care about regions and objects that are allowed to have
- * address space handlers
- */
- if ((node->type != ACPI_TYPE_DEVICE) &&
- (node->type != ACPI_TYPE_REGION) && (node != acpi_gbl_root_node)) {
- return (AE_OK);
- }
-
- /* Check for an existing internal object */
-
- obj_desc = acpi_ns_get_attached_object(node);
- if (!obj_desc) {
-
- /* No object, just exit */
-
- return (AE_OK);
- }
-
- /* Devices are handled different than regions */
-
- if (obj_desc->common.type == ACPI_TYPE_DEVICE) {
-
- /* Check if this Device already has a handler for this address space */
-
- next_handler_obj = obj_desc->device.handler;
- while (next_handler_obj) {
-
- /* Found a handler, is it for the same address space? */
-
- if (next_handler_obj->address_space.space_id ==
- handler_obj->address_space.space_id) {
- ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
- "Found handler for region [%s] in device %p(%p) "
- "handler %p\n",
- acpi_ut_get_region_name
- (handler_obj->address_space.
- space_id), obj_desc,
- next_handler_obj,
- handler_obj));
-
- /*
- * Since the object we found it on was a device, then it
- * means that someone has already installed a handler for
- * the branch of the namespace from this device on. Just
- * bail out telling the walk routine to not traverse this
- * branch. This preserves the scoping rule for handlers.
- */
- return (AE_CTRL_DEPTH);
- }
-
- /* Walk the linked list of handlers attached to this device */
-
- next_handler_obj = next_handler_obj->address_space.next;
- }
-
- /*
- * As long as the device didn't have a handler for this space we
- * don't care about it. We just ignore it and proceed.
- */
- return (AE_OK);
- }
-
- /* Object is a Region */
-
- if (obj_desc->region.space_id != handler_obj->address_space.space_id) {
-
- /* This region is for a different address space, just ignore it */
-
- return (AE_OK);
- }
-
- /*
- * Now we have a region and it is for the handler's address space type.
- *
- * First disconnect region for any previous handler (if any)
- */
- acpi_ev_detach_region(obj_desc, FALSE);
-
- /* Connect the region to the new handler */
-
- status = acpi_ev_attach_region(handler_obj, obj_desc, FALSE);
- return (status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ev_install_space_handler
+ * FUNCTION: acpi_ev_execute_reg_method
*
- * PARAMETERS: node - Namespace node for the device
- * space_id - The address space ID
- * handler - Address of the handler
- * setup - Address of the setup function
- * context - Value passed to the handler on each access
+ * PARAMETERS: region_obj - Region object
+ * function - Passed to _REG: On (1) or Off (0)
*
* RETURN: Status
*
- * DESCRIPTION: Install a handler for all op_regions of a given space_id.
- * Assumes namespace is locked
+ * DESCRIPTION: Execute _REG method for a region
*
******************************************************************************/
acpi_status
-acpi_ev_install_space_handler(struct acpi_namespace_node * node,
- acpi_adr_space_type space_id,
- acpi_adr_space_handler handler,
- acpi_adr_space_setup setup, void *context)
+acpi_ev_execute_reg_method(union acpi_operand_object *region_obj, u32 function)
{
- union acpi_operand_object *obj_desc;
- union acpi_operand_object *handler_obj;
+ struct acpi_evaluate_info *info;
+ union acpi_operand_object *args[3];
+ union acpi_operand_object *region_obj2;
acpi_status status;
- acpi_object_type type;
- u8 flags = 0;
- ACPI_FUNCTION_TRACE(ev_install_space_handler);
-
- /*
- * This registration is valid for only the types below and the root. This
- * is where the default handlers get placed.
- */
- if ((node->type != ACPI_TYPE_DEVICE) &&
- (node->type != ACPI_TYPE_PROCESSOR) &&
- (node->type != ACPI_TYPE_THERMAL) && (node != acpi_gbl_root_node)) {
- status = AE_BAD_PARAMETER;
- goto unlock_and_exit;
- }
+ ACPI_FUNCTION_TRACE(ev_execute_reg_method);
- if (handler == ACPI_DEFAULT_HANDLER) {
- flags = ACPI_ADDR_HANDLER_DEFAULT_INSTALLED;
-
- switch (space_id) {
- case ACPI_ADR_SPACE_SYSTEM_MEMORY:
- handler = acpi_ex_system_memory_space_handler;
- setup = acpi_ev_system_memory_region_setup;
- break;
-
- case ACPI_ADR_SPACE_SYSTEM_IO:
- handler = acpi_ex_system_io_space_handler;
- setup = acpi_ev_io_space_region_setup;
- break;
-
- case ACPI_ADR_SPACE_PCI_CONFIG:
- handler = acpi_ex_pci_config_space_handler;
- setup = acpi_ev_pci_config_region_setup;
- break;
-
- case ACPI_ADR_SPACE_CMOS:
- handler = acpi_ex_cmos_space_handler;
- setup = acpi_ev_cmos_region_setup;
- break;
-
- case ACPI_ADR_SPACE_PCI_BAR_TARGET:
- handler = acpi_ex_pci_bar_space_handler;
- setup = acpi_ev_pci_bar_region_setup;
- break;
-
- case ACPI_ADR_SPACE_DATA_TABLE:
- handler = acpi_ex_data_table_space_handler;
- setup = NULL;
- break;
-
- default:
- status = AE_BAD_PARAMETER;
- goto unlock_and_exit;
- }
+ region_obj2 = acpi_ns_get_secondary_object(region_obj);
+ if (!region_obj2) {
+ return_ACPI_STATUS(AE_NOT_EXIST);
}
- /* If the caller hasn't specified a setup routine, use the default */
-
- if (!setup) {
- setup = acpi_ev_default_region_setup;
+ if (region_obj2->extra.method_REG == NULL) {
+ return_ACPI_STATUS(AE_OK);
}
- /* Check for an existing internal object */
-
- obj_desc = acpi_ns_get_attached_object(node);
- if (obj_desc) {
- /*
- * The attached device object already exists. Make sure the handler
- * is not already installed.
- */
- handler_obj = obj_desc->device.handler;
-
- /* Walk the handler list for this device */
-
- while (handler_obj) {
-
- /* Same space_id indicates a handler already installed */
-
- if (handler_obj->address_space.space_id == space_id) {
- if (handler_obj->address_space.handler ==
- handler) {
- /*
- * It is (relatively) OK to attempt to install the SAME
- * handler twice. This can easily happen with the
- * PCI_Config space.
- */
- status = AE_SAME_HANDLER;
- goto unlock_and_exit;
- } else {
- /* A handler is already installed */
-
- status = AE_ALREADY_EXISTS;
- }
- goto unlock_and_exit;
- }
-
- /* Walk the linked list of handlers */
-
- handler_obj = handler_obj->address_space.next;
- }
- } else {
- ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
- "Creating object on Device %p while installing handler\n",
- node));
-
- /* obj_desc does not exist, create one */
-
- if (node->type == ACPI_TYPE_ANY) {
- type = ACPI_TYPE_DEVICE;
- } else {
- type = node->type;
- }
-
- obj_desc = acpi_ut_create_internal_object(type);
- if (!obj_desc) {
- status = AE_NO_MEMORY;
- goto unlock_and_exit;
- }
-
- /* Init new descriptor */
-
- obj_desc->common.type = (u8) type;
-
- /* Attach the new object to the Node */
-
- status = acpi_ns_attach_object(node, obj_desc, type);
-
- /* Remove local reference to the object */
-
- acpi_ut_remove_reference(obj_desc);
+ /* Allocate and initialize the evaluation information block */
- if (ACPI_FAILURE(status)) {
- goto unlock_and_exit;
- }
+ info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_evaluate_info));
+ if (!info) {
+ return_ACPI_STATUS(AE_NO_MEMORY);
}
- ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
- "Installing address handler for region %s(%X) on Device %4.4s %p(%p)\n",
- acpi_ut_get_region_name(space_id), space_id,
- acpi_ut_get_node_name(node), node, obj_desc));
+ info->prefix_node = region_obj2->extra.method_REG;
+ info->pathname = NULL;
+ info->parameters = args;
+ info->flags = ACPI_IGNORE_RETURN_VALUE;
/*
- * Install the handler
+ * The _REG method has two arguments:
+ *
+ * arg0 - Integer:
+ * Operation region space ID Same value as region_obj->Region.space_id
*
- * At this point there is no existing handler. Just allocate the object
- * for the handler and link it into the list.
+ * arg1 - Integer:
+ * connection status 1 for connecting the handler, 0 for disconnecting
+ * the handler (Passed as a parameter)
*/
- handler_obj =
- acpi_ut_create_internal_object(ACPI_TYPE_LOCAL_ADDRESS_HANDLER);
- if (!handler_obj) {
+ args[0] =
+ acpi_ut_create_integer_object((u64)region_obj->region.space_id);
+ if (!args[0]) {
status = AE_NO_MEMORY;
- goto unlock_and_exit;
+ goto cleanup1;
}
- /* Init handler obj */
+ args[1] = acpi_ut_create_integer_object((u64)function);
+ if (!args[1]) {
+ status = AE_NO_MEMORY;
+ goto cleanup2;
+ }
- handler_obj->address_space.space_id = (u8) space_id;
- handler_obj->address_space.handler_flags = flags;
- handler_obj->address_space.region_list = NULL;
- handler_obj->address_space.node = node;
- handler_obj->address_space.handler = handler;
- handler_obj->address_space.context = context;
- handler_obj->address_space.setup = setup;
+ args[2] = NULL; /* Terminate list */
- /* Install at head of Device.address_space list */
+ /* Execute the method, no return value */
- handler_obj->address_space.next = obj_desc->device.handler;
+ ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname
+ (ACPI_TYPE_METHOD, info->prefix_node, NULL));
- /*
- * The Device object is the first reference on the handler_obj.
- * Each region that uses the handler adds a reference.
- */
- obj_desc->device.handler = handler_obj;
+ status = acpi_ns_evaluate(info);
+ acpi_ut_remove_reference(args[1]);
- /*
- * Walk the namespace finding all of the regions this
- * handler will manage.
- *
- * Start at the device and search the branch toward
- * the leaf nodes until either the leaf is encountered or
- * a device is detected that has an address handler of the
- * same type.
- *
- * In either case, back up and search down the remainder
- * of the branch
- */
- status = acpi_ns_walk_namespace(ACPI_TYPE_ANY, node, ACPI_UINT32_MAX,
- ACPI_NS_WALK_UNLOCK,
- acpi_ev_install_handler, NULL,
- handler_obj, NULL);
+ cleanup2:
+ acpi_ut_remove_reference(args[0]);
- unlock_and_exit:
+ cleanup1:
+ ACPI_FREE(info);
return_ACPI_STATUS(status);
}