summaryrefslogtreecommitdiff
path: root/drivers/acpi/processor_driver.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/acpi/processor_driver.c')
-rw-r--r--drivers/acpi/processor_driver.c818
1 files changed, 78 insertions, 740 deletions
diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c
index c266cdc11784..823be116619e 100644
--- a/drivers/acpi/processor_driver.c
+++ b/drivers/acpi/processor_driver.c
@@ -1,11 +1,13 @@
/*
- * acpi_processor.c - ACPI Processor Driver ($Revision: 71 $)
+ * processor_driver.c - ACPI Processor Driver
*
* Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
* Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
* Copyright (C) 2004 Dominik Brodowski <linux@brodo.de>
* Copyright (C) 2004 Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
* - Added processor hotplug support
+ * Copyright (C) 2013, Intel Corporation
+ * Rafael J. Wysocki <rafael.j.wysocki@intel.com>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
@@ -24,55 +26,26 @@
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- * TBD:
- * 1. Make # power states dynamic.
- * 2. Support duty_cycle values that span bit 4.
- * 3. Optimize by having scheduler determine business instead of
- * having us try to calculate it here.
- * 4. Need C1 timing -- must modify kernel (IRQ handler) to get this.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
#include <linux/cpufreq.h>
#include <linux/cpu.h>
-#include <linux/dmi.h>
-#include <linux/moduleparam.h>
#include <linux/cpuidle.h>
#include <linux/slab.h>
#include <linux/acpi.h>
-#include <linux/memory_hotplug.h>
-
-#include <asm/io.h>
-#include <asm/cpu.h>
-#include <asm/delay.h>
-#include <asm/uaccess.h>
-#include <asm/processor.h>
-#include <asm/smp.h>
-#include <asm/acpi.h>
-
-#include <acpi/acpi_bus.h>
-#include <acpi/acpi_drivers.h>
+
#include <acpi/processor.h>
+#include "internal.h"
+
#define PREFIX "ACPI: "
-#define ACPI_PROCESSOR_CLASS "processor"
-#define ACPI_PROCESSOR_DEVICE_NAME "Processor"
-#define ACPI_PROCESSOR_FILE_INFO "info"
-#define ACPI_PROCESSOR_FILE_THROTTLING "throttling"
-#define ACPI_PROCESSOR_FILE_LIMIT "limit"
#define ACPI_PROCESSOR_NOTIFY_PERFORMANCE 0x80
#define ACPI_PROCESSOR_NOTIFY_POWER 0x81
#define ACPI_PROCESSOR_NOTIFY_THROTTLING 0x82
-#define ACPI_PROCESSOR_DEVICE_HID "ACPI0007"
-
-#define ACPI_PROCESSOR_LIMIT_USER 0
-#define ACPI_PROCESSOR_LIMIT_THERMAL 1
#define _COMPONENT ACPI_PROCESSOR_COMPONENT
ACPI_MODULE_NAME("processor_driver");
@@ -81,12 +54,8 @@ MODULE_AUTHOR("Paul Diefenbaugh");
MODULE_DESCRIPTION("ACPI Processor Driver");
MODULE_LICENSE("GPL");
-static int acpi_processor_add(struct acpi_device *device);
-static int acpi_processor_remove(struct acpi_device *device);
-static void acpi_processor_notify(struct acpi_device *device, u32 event);
-static acpi_status acpi_processor_hotadd_init(struct acpi_processor *pr);
-static int acpi_processor_handle_eject(struct acpi_processor *pr);
-static int acpi_processor_start(struct acpi_processor *pr);
+static int acpi_processor_start(struct device *dev);
+static int acpi_processor_stop(struct device *dev);
static const struct acpi_device_id processor_device_ids[] = {
{ACPI_PROCESSOR_OBJECT_HID, 0},
@@ -95,295 +64,24 @@ static const struct acpi_device_id processor_device_ids[] = {
};
MODULE_DEVICE_TABLE(acpi, processor_device_ids);
-static struct acpi_driver acpi_processor_driver = {
+static struct device_driver acpi_processor_driver = {
.name = "processor",
- .class = ACPI_PROCESSOR_CLASS,
- .ids = processor_device_ids,
- .ops = {
- .add = acpi_processor_add,
- .remove = acpi_processor_remove,
- .notify = acpi_processor_notify,
- },
+ .bus = &cpu_subsys,
+ .acpi_match_table = processor_device_ids,
+ .probe = acpi_processor_start,
+ .remove = acpi_processor_stop,
};
-#define INSTALL_NOTIFY_HANDLER 1
-#define UNINSTALL_NOTIFY_HANDLER 2
-
-DEFINE_PER_CPU(struct acpi_processor *, processors);
-EXPORT_PER_CPU_SYMBOL(processors);
-
-struct acpi_processor_errata errata __read_mostly;
-
-/* --------------------------------------------------------------------------
- Errata Handling
- -------------------------------------------------------------------------- */
-
-static int acpi_processor_errata_piix4(struct pci_dev *dev)
-{
- u8 value1 = 0;
- u8 value2 = 0;
-
-
- if (!dev)
- return -EINVAL;
-
- /*
- * Note that 'dev' references the PIIX4 ACPI Controller.
- */
-
- switch (dev->revision) {
- case 0:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 A-step\n"));
- break;
- case 1:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 B-step\n"));
- break;
- case 2:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4E\n"));
- break;
- case 3:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4M\n"));
- break;
- default:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found unknown PIIX4\n"));
- break;
- }
-
- switch (dev->revision) {
-
- case 0: /* PIIX4 A-step */
- case 1: /* PIIX4 B-step */
- /*
- * See specification changes #13 ("Manual Throttle Duty Cycle")
- * and #14 ("Enabling and Disabling Manual Throttle"), plus
- * erratum #5 ("STPCLK# Deassertion Time") from the January
- * 2002 PIIX4 specification update. Applies to only older
- * PIIX4 models.
- */
- errata.piix4.throttle = 1;
-
- case 2: /* PIIX4E */
- case 3: /* PIIX4M */
- /*
- * See erratum #18 ("C3 Power State/BMIDE and Type-F DMA
- * Livelock") from the January 2002 PIIX4 specification update.
- * Applies to all PIIX4 models.
- */
-
- /*
- * BM-IDE
- * ------
- * Find the PIIX4 IDE Controller and get the Bus Master IDE
- * Status register address. We'll use this later to read
- * each IDE controller's DMA status to make sure we catch all
- * DMA activity.
- */
- dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
- PCI_DEVICE_ID_INTEL_82371AB,
- PCI_ANY_ID, PCI_ANY_ID, NULL);
- if (dev) {
- errata.piix4.bmisx = pci_resource_start(dev, 4);
- pci_dev_put(dev);
- }
-
- /*
- * Type-F DMA
- * ----------
- * Find the PIIX4 ISA Controller and read the Motherboard
- * DMA controller's status to see if Type-F (Fast) DMA mode
- * is enabled (bit 7) on either channel. Note that we'll
- * disable C3 support if this is enabled, as some legacy
- * devices won't operate well if fast DMA is disabled.
- */
- dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
- PCI_DEVICE_ID_INTEL_82371AB_0,
- PCI_ANY_ID, PCI_ANY_ID, NULL);
- if (dev) {
- pci_read_config_byte(dev, 0x76, &value1);
- pci_read_config_byte(dev, 0x77, &value2);
- if ((value1 & 0x80) || (value2 & 0x80))
- errata.piix4.fdma = 1;
- pci_dev_put(dev);
- }
-
- break;
- }
-
- if (errata.piix4.bmisx)
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Bus master activity detection (BM-IDE) erratum enabled\n"));
- if (errata.piix4.fdma)
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Type-F DMA livelock erratum (C3 disabled)\n"));
-
- return 0;
-}
-
-static int acpi_processor_errata(struct acpi_processor *pr)
+static void acpi_processor_notify(acpi_handle handle, u32 event, void *data)
{
- int result = 0;
- struct pci_dev *dev = NULL;
-
-
- if (!pr)
- return -EINVAL;
-
- /*
- * PIIX4
- */
- dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
- PCI_DEVICE_ID_INTEL_82371AB_3, PCI_ANY_ID,
- PCI_ANY_ID, NULL);
- if (dev) {
- result = acpi_processor_errata_piix4(dev);
- pci_dev_put(dev);
- }
-
- return result;
-}
-
-/* --------------------------------------------------------------------------
- Driver Interface
- -------------------------------------------------------------------------- */
-
-static int acpi_processor_get_info(struct acpi_device *device)
-{
- acpi_status status = 0;
- union acpi_object object = { 0 };
- struct acpi_buffer buffer = { sizeof(union acpi_object), &object };
+ struct acpi_device *device = data;
struct acpi_processor *pr;
- int cpu_index, device_declaration = 0;
- static int cpu0_initialized;
-
- pr = acpi_driver_data(device);
- if (!pr)
- return -EINVAL;
-
- if (num_online_cpus() > 1)
- errata.smp = TRUE;
-
- acpi_processor_errata(pr);
-
- /*
- * Check to see if we have bus mastering arbitration control. This
- * is required for proper C3 usage (to maintain cache coherency).
- */
- if (acpi_gbl_FADT.pm2_control_block && acpi_gbl_FADT.pm2_control_length) {
- pr->flags.bm_control = 1;
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Bus mastering arbitration control present\n"));
- } else
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "No bus mastering arbitration control\n"));
-
- if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_OBJECT_HID)) {
- /* Declared with "Processor" statement; match ProcessorID */
- status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer);
- if (ACPI_FAILURE(status)) {
- dev_err(&device->dev,
- "Failed to evaluate processor object (0x%x)\n",
- status);
- return -ENODEV;
- }
-
- /*
- * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP.
- * >>> 'acpi_get_processor_id(acpi_id, &id)' in
- * arch/xxx/acpi.c
- */
- pr->acpi_id = object.processor.proc_id;
- } else {
- /*
- * Declared with "Device" statement; match _UID.
- * Note that we don't handle string _UIDs yet.
- */
- unsigned long long value;
- status = acpi_evaluate_integer(pr->handle, METHOD_NAME__UID,
- NULL, &value);
- if (ACPI_FAILURE(status)) {
- dev_err(&device->dev,
- "Failed to evaluate processor _UID (0x%x)\n",
- status);
- return -ENODEV;
- }
- device_declaration = 1;
- pr->acpi_id = value;
- }
- cpu_index = acpi_get_cpuid(pr->handle, device_declaration, pr->acpi_id);
-
- /* Handle UP system running SMP kernel, with no LAPIC in MADT */
- if (!cpu0_initialized && (cpu_index == -1) &&
- (num_online_cpus() == 1)) {
- cpu_index = 0;
- }
-
- cpu0_initialized = 1;
-
- pr->id = cpu_index;
-
- /*
- * Extra Processor objects may be enumerated on MP systems with
- * less than the max # of CPUs. They should be ignored _iff
- * they are physically not present.
- */
- if (pr->id == -1) {
- if (ACPI_FAILURE(acpi_processor_hotadd_init(pr)))
- return -ENODEV;
- }
- /*
- * On some boxes several processors use the same processor bus id.
- * But they are located in different scope. For example:
- * \_SB.SCK0.CPU0
- * \_SB.SCK1.CPU0
- * Rename the processor device bus id. And the new bus id will be
- * generated as the following format:
- * CPU+CPU ID.
- */
- sprintf(acpi_device_bid(device), "CPU%X", pr->id);
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Processor [%d:%d]\n", pr->id,
- pr->acpi_id));
-
- if (!object.processor.pblk_address)
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No PBLK (NULL address)\n"));
- else if (object.processor.pblk_length != 6)
- dev_err(&device->dev, "Invalid PBLK length [%d]\n",
- object.processor.pblk_length);
- else {
- pr->throttling.address = object.processor.pblk_address;
- pr->throttling.duty_offset = acpi_gbl_FADT.duty_offset;
- pr->throttling.duty_width = acpi_gbl_FADT.duty_width;
-
- pr->pblk = object.processor.pblk_address;
-
- /*
- * We don't care about error returns - we just try to mark
- * these reserved so that nobody else is confused into thinking
- * that this region might be unused..
- *
- * (In particular, allocating the IO range for Cardbus)
- */
- request_region(pr->throttling.address, 6, "ACPI CPU throttle");
- }
-
- /*
- * If ACPI describes a slot number for this CPU, we can use it
- * ensure we get the right value in the "physical id" field
- * of /proc/cpuinfo
- */
- status = acpi_evaluate_object(pr->handle, "_SUN", NULL, &buffer);
- if (ACPI_SUCCESS(status))
- arch_fix_phys_package_id(pr->id, object.integer.value);
-
- return 0;
-}
-
-static DEFINE_PER_CPU(void *, processor_device_array);
-
-static void acpi_processor_notify(struct acpi_device *device, u32 event)
-{
- struct acpi_processor *pr = acpi_driver_data(device);
int saved;
+ if (device->handle != handle)
+ return;
+
+ pr = acpi_driver_data(device);
if (!pr)
return;
@@ -420,55 +118,62 @@ static void acpi_processor_notify(struct acpi_device *device, u32 event)
return;
}
-static int acpi_cpu_soft_notify(struct notifier_block *nfb,
- unsigned long action, void *hcpu)
+static __cpuinit int __acpi_processor_start(struct acpi_device *device);
+
+static int __cpuinit acpi_cpu_soft_notify(struct notifier_block *nfb,
+ unsigned long action, void *hcpu)
{
unsigned int cpu = (unsigned long)hcpu;
struct acpi_processor *pr = per_cpu(processors, cpu);
+ struct acpi_device *device;
+
+ if (!pr || acpi_bus_get_device(pr->handle, &device))
+ return NOTIFY_DONE;
- if (action == CPU_ONLINE && pr) {
- /* CPU got physically hotplugged and onlined the first time:
- * Initialize missing things
+ if (action == CPU_ONLINE) {
+ /*
+ * CPU got physically hotplugged and onlined for the first time:
+ * Initialize missing things.
*/
if (pr->flags.need_hotplug_init) {
+ int ret;
+
pr_info("Will online and init hotplugged CPU: %d\n",
pr->id);
- WARN(acpi_processor_start(pr), "Failed to start CPU:"
- " %d\n", pr->id);
pr->flags.need_hotplug_init = 0;
- /* Normal CPU soft online event */
+ ret = __acpi_processor_start(device);
+ WARN(ret, "Failed to start CPU: %d\n", pr->id);
} else {
+ /* Normal CPU soft online event. */
acpi_processor_ppc_has_changed(pr, 0);
acpi_processor_hotplug(pr);
acpi_processor_reevaluate_tstate(pr, action);
acpi_processor_tstate_has_changed(pr);
}
- }
- if (action == CPU_DEAD && pr) {
- /* invalidate the flag.throttling after one CPU is offline */
+ } else if (action == CPU_DEAD) {
+ /* Invalidate flag.throttling after the CPU is offline. */
acpi_processor_reevaluate_tstate(pr, action);
}
return NOTIFY_OK;
}
-static struct notifier_block acpi_cpu_notifier =
+static struct notifier_block __refdata acpi_cpu_notifier =
{
.notifier_call = acpi_cpu_soft_notify,
};
-/*
- * acpi_processor_start() is called by the cpu_hotplug_notifier func:
- * acpi_cpu_soft_notify(). Getting it __cpuinit{data} is difficult, the
- * root cause seem to be that acpi_processor_uninstall_hotplug_notify()
- * is in the module_exit (__exit) func. Allowing acpi_processor_start()
- * to not be in __cpuinit section, but being called from __cpuinit funcs
- * via __ref looks like the right thing to do here.
- */
-static __ref int acpi_processor_start(struct acpi_processor *pr)
+static __cpuinit int __acpi_processor_start(struct acpi_device *device)
{
- struct acpi_device *device = per_cpu(processor_device_array, pr->id);
+ struct acpi_processor *pr = acpi_driver_data(device);
+ acpi_status status;
int result = 0;
+ if (!pr)
+ return -ENODEV;
+
+ if (pr->flags.need_hotplug_init)
+ return 0;
+
#ifdef CONFIG_CPU_FREQ
acpi_processor_ppc_has_changed(pr, 0);
acpi_processor_load_module(pr);
@@ -506,462 +211,95 @@ static __ref int acpi_processor_start(struct acpi_processor *pr)
goto err_remove_sysfs_thermal;
}
- return 0;
+ status = acpi_install_notify_handler(device->handle, ACPI_DEVICE_NOTIFY,
+ acpi_processor_notify, device);
+ if (ACPI_SUCCESS(status))
+ return 0;
-err_remove_sysfs_thermal:
+ sysfs_remove_link(&pr->cdev->device.kobj, "device");
+ err_remove_sysfs_thermal:
sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
-err_thermal_unregister:
+ err_thermal_unregister:
thermal_cooling_device_unregister(pr->cdev);
-err_power_exit:
+ err_power_exit:
acpi_processor_power_exit(pr);
-
return result;
}
-/*
- * Do not put anything in here which needs the core to be online.
- * For example MSR access or setting up things which check for cpuinfo_x86
- * (cpu_data(cpu)) values, like CPU feature flags, family, model, etc.
- * Such things have to be put in and set up above in acpi_processor_start()
- */
-static int __cpuinit acpi_processor_add(struct acpi_device *device)
+static int __cpuinit acpi_processor_start(struct device *dev)
{
- struct acpi_processor *pr = NULL;
- int result = 0;
- struct device *dev;
-
- pr = kzalloc(sizeof(struct acpi_processor), GFP_KERNEL);
- if (!pr)
- return -ENOMEM;
-
- if (!zalloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) {
- result = -ENOMEM;
- goto err_free_pr;
- }
-
- pr->handle = device->handle;
- strcpy(acpi_device_name(device), ACPI_PROCESSOR_DEVICE_NAME);
- strcpy(acpi_device_class(device), ACPI_PROCESSOR_CLASS);
- device->driver_data = pr;
-
- result = acpi_processor_get_info(device);
- if (result) {
- /* Processor is physically not present */
- return 0;
- }
+ struct acpi_device *device;
-#ifdef CONFIG_SMP
- if (pr->id >= setup_max_cpus && pr->id != 0)
- return 0;
-#endif
-
- BUG_ON(pr->id >= nr_cpu_ids);
-
- /*
- * Buggy BIOS check
- * ACPI id of processors can be reported wrongly by the BIOS.
- * Don't trust it blindly
- */
- if (per_cpu(processor_device_array, pr->id) != NULL &&
- per_cpu(processor_device_array, pr->id) != device) {
- dev_warn(&device->dev,
- "BIOS reported wrong ACPI id %d for the processor\n",
- pr->id);
- result = -ENODEV;
- goto err_free_cpumask;
- }
- per_cpu(processor_device_array, pr->id) = device;
+ if (acpi_bus_get_device(ACPI_HANDLE(dev), &device))
+ return -ENODEV;
- per_cpu(processors, pr->id) = pr;
-
- dev = get_cpu_device(pr->id);
- if (sysfs_create_link(&device->dev.kobj, &dev->kobj, "sysdev")) {
- result = -EFAULT;
- goto err_clear_processor;
- }
-
- /*
- * Do not start hotplugged CPUs now, but when they
- * are onlined the first time
- */
- if (pr->flags.need_hotplug_init)
- return 0;
-
- result = acpi_processor_start(pr);
- if (result)
- goto err_remove_sysfs;
-
- return 0;
-
-err_remove_sysfs:
- sysfs_remove_link(&device->dev.kobj, "sysdev");
-err_clear_processor:
- /*
- * processor_device_array is not cleared to allow checks for buggy BIOS
- */
- per_cpu(processors, pr->id) = NULL;
-err_free_cpumask:
- free_cpumask_var(pr->throttling.shared_cpu_map);
-err_free_pr:
- kfree(pr);
- return result;
+ return __acpi_processor_start(device);
}
-static int acpi_processor_remove(struct acpi_device *device)
+static int acpi_processor_stop(struct device *dev)
{
- struct acpi_processor *pr = NULL;
+ struct acpi_device *device;
+ struct acpi_processor *pr;
+ if (acpi_bus_get_device(ACPI_HANDLE(dev), &device))
+ return 0;
- if (!device || !acpi_driver_data(device))
- return -EINVAL;
+ acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY,
+ acpi_processor_notify);
pr = acpi_driver_data(device);
-
- if (pr->id >= nr_cpu_ids)
- goto free;
-
- if (device->removal_type == ACPI_BUS_REMOVAL_EJECT) {
- if (acpi_processor_handle_eject(pr))
- return -EINVAL;
- }
+ if (!pr)
+ return 0;
acpi_processor_power_exit(pr);
- sysfs_remove_link(&device->dev.kobj, "sysdev");
-
if (pr->cdev) {
sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
sysfs_remove_link(&pr->cdev->device.kobj, "device");
thermal_cooling_device_unregister(pr->cdev);
pr->cdev = NULL;
}
-
- per_cpu(processors, pr->id) = NULL;
- per_cpu(processor_device_array, pr->id) = NULL;
- try_offline_node(cpu_to_node(pr->id));
-
-free:
- free_cpumask_var(pr->throttling.shared_cpu_map);
- kfree(pr);
-
return 0;
}
-#ifdef CONFIG_ACPI_HOTPLUG_CPU
-/****************************************************************************
- * Acpi processor hotplug support *
- ****************************************************************************/
-
-static int is_processor_present(acpi_handle handle)
-{
- acpi_status status;
- unsigned long long sta = 0;
-
-
- status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
-
- if (ACPI_SUCCESS(status) && (sta & ACPI_STA_DEVICE_PRESENT))
- return 1;
-
- /*
- * _STA is mandatory for a processor that supports hot plug
- */
- if (status == AE_NOT_FOUND)
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Processor does not support hot plug\n"));
- else
- ACPI_EXCEPTION((AE_INFO, status,
- "Processor Device is not present"));
- return 0;
-}
-
-static void acpi_processor_hotplug_notify(acpi_handle handle,
- u32 event, void *data)
-{
- struct acpi_device *device = NULL;
- struct acpi_eject_event *ej_event = NULL;
- u32 ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE; /* default */
- acpi_status status;
- int result;
-
- acpi_scan_lock_acquire();
-
- switch (event) {
- case ACPI_NOTIFY_BUS_CHECK:
- case ACPI_NOTIFY_DEVICE_CHECK:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Processor driver received %s event\n",
- (event == ACPI_NOTIFY_BUS_CHECK) ?
- "ACPI_NOTIFY_BUS_CHECK" : "ACPI_NOTIFY_DEVICE_CHECK"));
-
- if (!is_processor_present(handle))
- break;
-
- if (!acpi_bus_get_device(handle, &device))
- break;
-
- result = acpi_bus_scan(handle);
- if (result) {
- acpi_handle_err(handle, "Unable to add the device\n");
- break;
- }
- result = acpi_bus_get_device(handle, &device);
- if (result) {
- acpi_handle_err(handle, "Missing device object\n");
- break;
- }
- ost_code = ACPI_OST_SC_SUCCESS;
- break;
-
- case ACPI_NOTIFY_EJECT_REQUEST:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "received ACPI_NOTIFY_EJECT_REQUEST\n"));
-
- if (acpi_bus_get_device(handle, &device)) {
- acpi_handle_err(handle,
- "Device don't exist, dropping EJECT\n");
- break;
- }
- if (!acpi_driver_data(device)) {
- acpi_handle_err(handle,
- "Driver data is NULL, dropping EJECT\n");
- break;
- }
-
- ej_event = kmalloc(sizeof(*ej_event), GFP_KERNEL);
- if (!ej_event) {
- acpi_handle_err(handle, "No memory, dropping EJECT\n");
- break;
- }
-
- get_device(&device->dev);
- ej_event->device = device;
- ej_event->event = ACPI_NOTIFY_EJECT_REQUEST;
- /* The eject is carried out asynchronously. */
- status = acpi_os_hotplug_execute(acpi_bus_hot_remove_device,
- ej_event);
- if (ACPI_FAILURE(status)) {
- put_device(&device->dev);
- kfree(ej_event);
- break;
- }
- goto out;
-
- default:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Unsupported event [0x%x]\n", event));
-
- /* non-hotplug event; possibly handled by other handler */
- goto out;
- }
-
- /* Inform firmware that the hotplug operation has completed */
- (void) acpi_evaluate_hotplug_ost(handle, event, ost_code, NULL);
-
- out:
- acpi_scan_lock_release();
-}
-
-static acpi_status is_processor_device(acpi_handle handle)
-{
- struct acpi_device_info *info;
- char *hid;
- acpi_status status;
-
- status = acpi_get_object_info(handle, &info);
- if (ACPI_FAILURE(status))
- return status;
-
- if (info->type == ACPI_TYPE_PROCESSOR) {
- kfree(info);
- return AE_OK; /* found a processor object */
- }
-
- if (!(info->valid & ACPI_VALID_HID)) {
- kfree(info);
- return AE_ERROR;
- }
-
- hid = info->hardware_id.string;
- if ((hid == NULL) || strcmp(hid, ACPI_PROCESSOR_DEVICE_HID)) {
- kfree(info);
- return AE_ERROR;
- }
-
- kfree(info);
- return AE_OK; /* found a processor device object */
-}
-
-static acpi_status
-processor_walk_namespace_cb(acpi_handle handle,
- u32 lvl, void *context, void **rv)
-{
- acpi_status status;
- int *action = context;
-
- status = is_processor_device(handle);
- if (ACPI_FAILURE(status))
- return AE_OK; /* not a processor; continue to walk */
-
- switch (*action) {
- case INSTALL_NOTIFY_HANDLER:
- acpi_install_notify_handler(handle,
- ACPI_SYSTEM_NOTIFY,
- acpi_processor_hotplug_notify,
- NULL);
- break;
- case UNINSTALL_NOTIFY_HANDLER:
- acpi_remove_notify_handler(handle,
- ACPI_SYSTEM_NOTIFY,
- acpi_processor_hotplug_notify);
- break;
- default:
- break;
- }
-
- /* found a processor; skip walking underneath */
- return AE_CTRL_DEPTH;
-}
-
-static acpi_status acpi_processor_hotadd_init(struct acpi_processor *pr)
-{
- acpi_handle handle = pr->handle;
-
- if (!is_processor_present(handle)) {
- return AE_ERROR;
- }
-
- if (acpi_map_lsapic(handle, &pr->id))
- return AE_ERROR;
-
- if (arch_register_cpu(pr->id)) {
- acpi_unmap_lsapic(pr->id);
- return AE_ERROR;
- }
-
- /* CPU got hot-plugged, but cpu_data is not initialized yet
- * Set flag to delay cpu_idle/throttling initialization
- * in:
- * acpi_processor_add()
- * acpi_processor_get_info()
- * and do it when the CPU gets online the first time
- * TBD: Cleanup above functions and try to do this more elegant.
- */
- pr_info("CPU %d got hotplugged\n", pr->id);
- pr->flags.need_hotplug_init = 1;
-
- return AE_OK;
-}
-
-static int acpi_processor_handle_eject(struct acpi_processor *pr)
-{
- if (cpu_online(pr->id))
- cpu_down(pr->id);
-
- get_online_cpus();
- /*
- * The cpu might become online again at this point. So we check whether
- * the cpu has been onlined or not. If the cpu became online, it means
- * that someone wants to use the cpu. So acpi_processor_handle_eject()
- * returns -EAGAIN.
- */
- if (unlikely(cpu_online(pr->id))) {
- put_online_cpus();
- pr_warn("Failed to remove CPU %d, because other task "
- "brought the CPU back online\n", pr->id);
- return -EAGAIN;
- }
- arch_unregister_cpu(pr->id);
- acpi_unmap_lsapic(pr->id);
- put_online_cpus();
- return (0);
-}
-#else
-static acpi_status acpi_processor_hotadd_init(struct acpi_processor *pr)
-{
- return AE_ERROR;
-}
-static int acpi_processor_handle_eject(struct acpi_processor *pr)
-{
- return (-EINVAL);
-}
-#endif
-
-static
-void acpi_processor_install_hotplug_notify(void)
-{
-#ifdef CONFIG_ACPI_HOTPLUG_CPU
- int action = INSTALL_NOTIFY_HANDLER;
- acpi_walk_namespace(ACPI_TYPE_ANY,
- ACPI_ROOT_OBJECT,
- ACPI_UINT32_MAX,
- processor_walk_namespace_cb, NULL, &action, NULL);
-#endif
- register_hotcpu_notifier(&acpi_cpu_notifier);
-}
-
-static
-void acpi_processor_uninstall_hotplug_notify(void)
-{
-#ifdef CONFIG_ACPI_HOTPLUG_CPU
- int action = UNINSTALL_NOTIFY_HANDLER;
- acpi_walk_namespace(ACPI_TYPE_ANY,
- ACPI_ROOT_OBJECT,
- ACPI_UINT32_MAX,
- processor_walk_namespace_cb, NULL, &action, NULL);
-#endif
- unregister_hotcpu_notifier(&acpi_cpu_notifier);
-}
-
/*
* We keep the driver loaded even when ACPI is not running.
* This is needed for the powernow-k8 driver, that works even without
* ACPI, but needs symbols from this driver
*/
-static int __init acpi_processor_init(void)
+static int __init acpi_processor_driver_init(void)
{
int result = 0;
if (acpi_disabled)
return 0;
- result = acpi_bus_register_driver(&acpi_processor_driver);
+ result = driver_register(&acpi_processor_driver);
if (result < 0)
return result;
acpi_processor_syscore_init();
-
- acpi_processor_install_hotplug_notify();
-
+ register_hotcpu_notifier(&acpi_cpu_notifier);
acpi_thermal_cpufreq_init();
-
acpi_processor_ppc_init();
-
acpi_processor_throttling_init();
-
return 0;
}
-static void __exit acpi_processor_exit(void)
+static void __exit acpi_processor_driver_exit(void)
{
if (acpi_disabled)
return;
acpi_processor_ppc_exit();
-
acpi_thermal_cpufreq_exit();
-
- acpi_processor_uninstall_hotplug_notify();
-
+ unregister_hotcpu_notifier(&acpi_cpu_notifier);
acpi_processor_syscore_exit();
-
- acpi_bus_unregister_driver(&acpi_processor_driver);
-
- return;
+ driver_unregister(&acpi_processor_driver);
}
-module_init(acpi_processor_init);
-module_exit(acpi_processor_exit);
+module_init(acpi_processor_driver_init);
+module_exit(acpi_processor_driver_exit);
MODULE_ALIAS("processor");