summaryrefslogtreecommitdiff
path: root/drivers/ata/ahci_sunxi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/ahci_sunxi.c')
-rw-r--r--drivers/ata/ahci_sunxi.c47
1 files changed, 45 insertions, 2 deletions
diff --git a/drivers/ata/ahci_sunxi.c b/drivers/ata/ahci_sunxi.c
index 4100e904376b..cb69b737cb49 100644
--- a/drivers/ata/ahci_sunxi.c
+++ b/drivers/ata/ahci_sunxi.c
@@ -149,8 +149,51 @@ static void ahci_sunxi_start_engine(struct ata_port *ap)
void __iomem *port_mmio = ahci_port_base(ap);
struct ahci_host_priv *hpriv = ap->host->private_data;
- /* Setup DMA before DMA start */
- sunxi_clrsetbits(hpriv->mmio + AHCI_P0DMACR, 0x0000ff00, 0x00004400);
+ /* Setup DMA before DMA start
+ *
+ * NOTE: A similar SoC with SATA/AHCI by Texas Instruments documents
+ * this Vendor Specific Port (P0DMACR, aka PxDMACR) in its
+ * User's Guide document (TMS320C674x/OMAP-L1x Processor
+ * Serial ATA (SATA) Controller, Literature Number: SPRUGJ8C,
+ * March 2011, Chapter 4.33 Port DMA Control Register (P0DMACR),
+ * p.68, https://www.ti.com/lit/ug/sprugj8c/sprugj8c.pdf)
+ * as equivalent to the following struct:
+ *
+ * struct AHCI_P0DMACR_t
+ * {
+ * unsigned TXTS : 4;
+ * unsigned RXTS : 4;
+ * unsigned TXABL : 4;
+ * unsigned RXABL : 4;
+ * unsigned Reserved : 16;
+ * };
+ *
+ * TXTS: Transmit Transaction Size (TX_TRANSACTION_SIZE).
+ * This field defines the DMA transaction size in DWORDs for
+ * transmit (system bus read, device write) operation. [...]
+ *
+ * RXTS: Receive Transaction Size (RX_TRANSACTION_SIZE).
+ * This field defines the Port DMA transaction size in DWORDs
+ * for receive (system bus write, device read) operation. [...]
+ *
+ * TXABL: Transmit Burst Limit.
+ * This field allows software to limit the VBUSP master read
+ * burst size. [...]
+ *
+ * RXABL: Receive Burst Limit.
+ * Allows software to limit the VBUSP master write burst
+ * size. [...]
+ *
+ * Reserved: Reserved.
+ *
+ *
+ * NOTE: According to the above document, the following alternative
+ * to the code below could perhaps be a better option
+ * (or preparation) for possible further improvements later:
+ * sunxi_clrsetbits(hpriv->mmio + AHCI_P0DMACR, 0x0000ffff,
+ * 0x00000033);
+ */
+ sunxi_clrsetbits(hpriv->mmio + AHCI_P0DMACR, 0x0000ffff, 0x00004433);
/* Start DMA */
sunxi_setbits(port_mmio + PORT_CMD, PORT_CMD_START);