summaryrefslogtreecommitdiff
path: root/drivers/ata/pata_sch.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_sch.c')
-rw-r--r--drivers/ata/pata_sch.c206
1 files changed, 206 insertions, 0 deletions
diff --git a/drivers/ata/pata_sch.c b/drivers/ata/pata_sch.c
new file mode 100644
index 000000000000..c8cc027789fe
--- /dev/null
+++ b/drivers/ata/pata_sch.c
@@ -0,0 +1,206 @@
+/*
+ * pata_sch.c - Intel SCH PATA controllers
+ *
+ * Copyright (c) 2008 Alek Du <alek.du@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+/*
+ * Supports:
+ * Intel SCH (AF82US15W, AF82US15L, AF82UL11L) chipsets -- see spec at:
+ * http://download.intel.com/design/chipsets/embedded/datashts/319537.pdf
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+#include <linux/dmi.h>
+
+#define DRV_NAME "pata_sch"
+#define DRV_VERSION "0.2"
+
+/* see SCH datasheet page 351 */
+enum {
+ D0TIM = 0x80, /* Device 0 Timing Register */
+ D1TIM = 0x84, /* Device 1 Timing Register */
+ PM = 0x07, /* PIO Mode Bit Mask */
+ MDM = (0x03 << 8), /* Multi-word DMA Mode Bit Mask */
+ UDM = (0x07 << 16), /* Ultra DMA Mode Bit Mask */
+ PPE = (1 << 30), /* Prefetch/Post Enable */
+ USD = (1 << 31), /* Use Synchronous DMA */
+};
+
+static int sch_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent);
+static void sch_set_piomode(struct ata_port *ap, struct ata_device *adev);
+static void sch_set_dmamode(struct ata_port *ap, struct ata_device *adev);
+
+static const struct pci_device_id sch_pci_tbl[] = {
+ /* Intel SCH PATA Controller */
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_SCH_IDE), 0 },
+ { } /* terminate list */
+};
+
+static struct pci_driver sch_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = sch_pci_tbl,
+ .probe = sch_init_one,
+ .remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
+#endif
+};
+
+static struct scsi_host_template sch_sht = {
+ ATA_BMDMA_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations sch_pata_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .cable_detect = ata_cable_unknown,
+ .set_piomode = sch_set_piomode,
+ .set_dmamode = sch_set_dmamode,
+};
+
+static struct ata_port_info sch_port_info = {
+ .flags = 0,
+ .pio_mask = ATA_PIO4, /* pio0-4 */
+ .mwdma_mask = ATA_MWDMA2, /* mwdma0-2 */
+ .udma_mask = ATA_UDMA5, /* udma0-5 */
+ .port_ops = &sch_pata_ops,
+};
+
+MODULE_AUTHOR("Alek Du <alek.du@intel.com>");
+MODULE_DESCRIPTION("SCSI low-level driver for Intel SCH PATA controllers");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, sch_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
+
+/**
+ * sch_set_piomode - Initialize host controller PATA PIO timings
+ * @ap: Port whose timings we are configuring
+ * @adev: ATA device
+ *
+ * Set PIO mode for device, in host controller PCI config space.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void sch_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ unsigned int pio = adev->pio_mode - XFER_PIO_0;
+ struct pci_dev *dev = to_pci_dev(ap->host->dev);
+ unsigned int port = adev->devno ? D1TIM : D0TIM;
+ unsigned int data;
+
+ pci_read_config_dword(dev, port, &data);
+ /* see SCH datasheet page 351 */
+ /* set PIO mode */
+ data &= ~(PM | PPE);
+ data |= pio;
+ /* enable PPE for block device */
+ if (adev->class == ATA_DEV_ATA)
+ data |= PPE;
+ pci_write_config_dword(dev, port, data);
+}
+
+/**
+ * sch_set_dmamode - Initialize host controller PATA DMA timings
+ * @ap: Port whose timings we are configuring
+ * @adev: ATA device
+ *
+ * Set MW/UDMA mode for device, in host controller PCI config space.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void sch_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+ unsigned int dma_mode = adev->dma_mode;
+ struct pci_dev *dev = to_pci_dev(ap->host->dev);
+ unsigned int port = adev->devno ? D1TIM : D0TIM;
+ unsigned int data;
+
+ pci_read_config_dword(dev, port, &data);
+ /* see SCH datasheet page 351 */
+ if (dma_mode >= XFER_UDMA_0) {
+ /* enable Synchronous DMA mode */
+ data |= USD;
+ data &= ~UDM;
+ data |= (dma_mode - XFER_UDMA_0) << 16;
+ } else { /* must be MWDMA mode, since we masked SWDMA already */
+ data &= ~(USD | MDM);
+ data |= (dma_mode - XFER_MW_DMA_0) << 8;
+ }
+ pci_write_config_dword(dev, port, data);
+}
+
+/**
+ * sch_init_one - Register SCH ATA PCI device with kernel services
+ * @pdev: PCI device to register
+ * @ent: Entry in sch_pci_tbl matching with @pdev
+ *
+ * LOCKING:
+ * Inherited from PCI layer (may sleep).
+ *
+ * RETURNS:
+ * Zero on success, or -ERRNO value.
+ */
+
+static int __devinit sch_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ static int printed_version;
+ const struct ata_port_info *ppi[] = { &sch_port_info, NULL };
+ struct ata_host *host;
+ int rc;
+
+ if (!printed_version++)
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "version " DRV_VERSION "\n");
+
+ /* enable device and prepare host */
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
+ rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+ if (rc)
+ return rc;
+ pci_set_master(pdev);
+ return ata_pci_sff_activate_host(host, ata_sff_interrupt, &sch_sht);
+}
+
+static int __init sch_init(void)
+{
+ return pci_register_driver(&sch_pci_driver);
+}
+
+static void __exit sch_exit(void)
+{
+ pci_unregister_driver(&sch_pci_driver);
+}
+
+module_init(sch_init);
+module_exit(sch_exit);