summaryrefslogtreecommitdiff
path: root/drivers/base/auxiliary.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/base/auxiliary.c')
-rw-r--r--drivers/base/auxiliary.c152
1 files changed, 150 insertions, 2 deletions
diff --git a/drivers/base/auxiliary.c b/drivers/base/auxiliary.c
index 9230c9472bb0..8c5e65930617 100644
--- a/drivers/base/auxiliary.c
+++ b/drivers/base/auxiliary.c
@@ -17,6 +17,147 @@
#include <linux/auxiliary_bus.h>
#include "base.h"
+/**
+ * DOC: PURPOSE
+ *
+ * In some subsystems, the functionality of the core device (PCI/ACPI/other) is
+ * too complex for a single device to be managed by a monolithic driver (e.g.
+ * Sound Open Firmware), multiple devices might implement a common intersection
+ * of functionality (e.g. NICs + RDMA), or a driver may want to export an
+ * interface for another subsystem to drive (e.g. SIOV Physical Function export
+ * Virtual Function management). A split of the functionality into child-
+ * devices representing sub-domains of functionality makes it possible to
+ * compartmentalize, layer, and distribute domain-specific concerns via a Linux
+ * device-driver model.
+ *
+ * An example for this kind of requirement is the audio subsystem where a
+ * single IP is handling multiple entities such as HDMI, Soundwire, local
+ * devices such as mics/speakers etc. The split for the core's functionality
+ * can be arbitrary or be defined by the DSP firmware topology and include
+ * hooks for test/debug. This allows for the audio core device to be minimal
+ * and focused on hardware-specific control and communication.
+ *
+ * Each auxiliary_device represents a part of its parent functionality. The
+ * generic behavior can be extended and specialized as needed by encapsulating
+ * an auxiliary_device within other domain-specific structures and the use of
+ * .ops callbacks. Devices on the auxiliary bus do not share any structures and
+ * the use of a communication channel with the parent is domain-specific.
+ *
+ * Note that ops are intended as a way to augment instance behavior within a
+ * class of auxiliary devices, it is not the mechanism for exporting common
+ * infrastructure from the parent. Consider EXPORT_SYMBOL_NS() to convey
+ * infrastructure from the parent module to the auxiliary module(s).
+ */
+
+/**
+ * DOC: USAGE
+ *
+ * The auxiliary bus is to be used when a driver and one or more kernel
+ * modules, who share a common header file with the driver, need a mechanism to
+ * connect and provide access to a shared object allocated by the
+ * auxiliary_device's registering driver. The registering driver for the
+ * auxiliary_device(s) and the kernel module(s) registering auxiliary_drivers
+ * can be from the same subsystem, or from multiple subsystems.
+ *
+ * The emphasis here is on a common generic interface that keeps subsystem
+ * customization out of the bus infrastructure.
+ *
+ * One example is a PCI network device that is RDMA-capable and exports a child
+ * device to be driven by an auxiliary_driver in the RDMA subsystem. The PCI
+ * driver allocates and registers an auxiliary_device for each physical
+ * function on the NIC. The RDMA driver registers an auxiliary_driver that
+ * claims each of these auxiliary_devices. This conveys data/ops published by
+ * the parent PCI device/driver to the RDMA auxiliary_driver.
+ *
+ * Another use case is for the PCI device to be split out into multiple sub
+ * functions. For each sub function an auxiliary_device is created. A PCI sub
+ * function driver binds to such devices that creates its own one or more class
+ * devices. A PCI sub function auxiliary device is likely to be contained in a
+ * struct with additional attributes such as user defined sub function number
+ * and optional attributes such as resources and a link to the parent device.
+ * These attributes could be used by systemd/udev; and hence should be
+ * initialized before a driver binds to an auxiliary_device.
+ *
+ * A key requirement for utilizing the auxiliary bus is that there is no
+ * dependency on a physical bus, device, register accesses or regmap support.
+ * These individual devices split from the core cannot live on the platform bus
+ * as they are not physical devices that are controlled by DT/ACPI. The same
+ * argument applies for not using MFD in this scenario as MFD relies on
+ * individual function devices being physical devices.
+ */
+
+/**
+ * DOC: EXAMPLE
+ *
+ * Auxiliary devices are created and registered by a subsystem-level core
+ * device that needs to break up its functionality into smaller fragments. One
+ * way to extend the scope of an auxiliary_device is to encapsulate it within a
+ * domain- pecific structure defined by the parent device. This structure
+ * contains the auxiliary_device and any associated shared data/callbacks
+ * needed to establish the connection with the parent.
+ *
+ * An example is:
+ *
+ * .. code-block:: c
+ *
+ * struct foo {
+ * struct auxiliary_device auxdev;
+ * void (*connect)(struct auxiliary_device *auxdev);
+ * void (*disconnect)(struct auxiliary_device *auxdev);
+ * void *data;
+ * };
+ *
+ * The parent device then registers the auxiliary_device by calling
+ * auxiliary_device_init(), and then auxiliary_device_add(), with the pointer
+ * to the auxdev member of the above structure. The parent provides a name for
+ * the auxiliary_device that, combined with the parent's KBUILD_MODNAME,
+ * creates a match_name that is be used for matching and binding with a driver.
+ *
+ * Whenever an auxiliary_driver is registered, based on the match_name, the
+ * auxiliary_driver's probe() is invoked for the matching devices. The
+ * auxiliary_driver can also be encapsulated inside custom drivers that make
+ * the core device's functionality extensible by adding additional
+ * domain-specific ops as follows:
+ *
+ * .. code-block:: c
+ *
+ * struct my_ops {
+ * void (*send)(struct auxiliary_device *auxdev);
+ * void (*receive)(struct auxiliary_device *auxdev);
+ * };
+ *
+ *
+ * struct my_driver {
+ * struct auxiliary_driver auxiliary_drv;
+ * const struct my_ops ops;
+ * };
+ *
+ * An example of this type of usage is:
+ *
+ * .. code-block:: c
+ *
+ * const struct auxiliary_device_id my_auxiliary_id_table[] = {
+ * { .name = "foo_mod.foo_dev" },
+ * { },
+ * };
+ *
+ * const struct my_ops my_custom_ops = {
+ * .send = my_tx,
+ * .receive = my_rx,
+ * };
+ *
+ * const struct my_driver my_drv = {
+ * .auxiliary_drv = {
+ * .name = "myauxiliarydrv",
+ * .id_table = my_auxiliary_id_table,
+ * .probe = my_probe,
+ * .remove = my_remove,
+ * .shutdown = my_shutdown,
+ * },
+ * .ops = my_custom_ops,
+ * };
+ */
+
static const struct auxiliary_device_id *auxiliary_match_id(const struct auxiliary_device_id *id,
const struct auxiliary_device *auxdev)
{
@@ -117,7 +258,7 @@ static struct bus_type auxiliary_bus_type = {
* auxiliary_device_init - check auxiliary_device and initialize
* @auxdev: auxiliary device struct
*
- * This is the first step in the two-step process to register an
+ * This is the second step in the three-step process to register an
* auxiliary_device.
*
* When this function returns an error code, then the device_initialize will
@@ -155,7 +296,7 @@ EXPORT_SYMBOL_GPL(auxiliary_device_init);
* @auxdev: auxiliary bus device to add to the bus
* @modname: name of the parent device's driver module
*
- * This is the second step in the two-step process to register an
+ * This is the third step in the three-step process to register an
* auxiliary_device.
*
* This function must be called after a successful call to
@@ -202,6 +343,8 @@ EXPORT_SYMBOL_GPL(__auxiliary_device_add);
* This function returns a reference to a device that is 'found'
* for later use, as determined by the @match callback.
*
+ * The reference returned should be released with put_device().
+ *
* The callback should return 0 if the device doesn't match and non-zero
* if it does. If the callback returns non-zero, this function will
* return to the caller and not iterate over any more devices.
@@ -225,6 +368,11 @@ EXPORT_SYMBOL_GPL(auxiliary_find_device);
* @auxdrv: auxiliary_driver structure
* @owner: owning module/driver
* @modname: KBUILD_MODNAME for parent driver
+ *
+ * The expectation is that users will call the "auxiliary_driver_register"
+ * macro so that the caller's KBUILD_MODNAME is automatically inserted for the
+ * modname parameter. Only if a user requires a custom name would this version
+ * be called directly.
*/
int __auxiliary_driver_register(struct auxiliary_driver *auxdrv,
struct module *owner, const char *modname)