summaryrefslogtreecommitdiff
path: root/drivers/block/floppy.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/block/floppy.c')
-rw-r--r--drivers/block/floppy.c466
1 files changed, 239 insertions, 227 deletions
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index c3daa64cb52c..3e9db22db2a8 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -337,8 +337,7 @@ static bool initialized;
/*
* globals used by 'result()'
*/
-#define MAX_REPLIES 16
-static unsigned char reply_buffer[MAX_REPLIES];
+static unsigned char reply_buffer[FD_RAW_REPLY_SIZE];
static int inr; /* size of reply buffer, when called from interrupt */
#define ST0 0
#define ST1 1
@@ -595,12 +594,12 @@ static unsigned char in_sector_offset; /* offset within physical sector,
static inline unsigned char fdc_inb(int fdc, int reg)
{
- return fd_inb(fdc_state[fdc].address + reg);
+ return fd_inb(fdc_state[fdc].address, reg);
}
static inline void fdc_outb(unsigned char value, int fdc, int reg)
{
- fd_outb(value, fdc_state[fdc].address + reg);
+ fd_outb(value, fdc_state[fdc].address, reg);
}
static inline bool drive_no_geom(int drive)
@@ -668,16 +667,12 @@ static struct output_log {
static int output_log_pos;
-#define current_reqD -1
#define MAXTIMEOUT -2
static void __reschedule_timeout(int drive, const char *message)
{
unsigned long delay;
- if (drive == current_reqD)
- drive = current_drive;
-
if (drive < 0 || drive >= N_DRIVE) {
delay = 20UL * HZ;
drive = 0;
@@ -827,59 +822,70 @@ static int set_dor(int fdc, char mask, char data)
return olddor;
}
-static void twaddle(void)
+static void twaddle(int fdc, int drive)
{
- if (drive_params[current_drive].select_delay)
+ if (drive_params[drive].select_delay)
return;
- fdc_outb(fdc_state[current_fdc].dor & ~(0x10 << UNIT(current_drive)),
- current_fdc, FD_DOR);
- fdc_outb(fdc_state[current_fdc].dor, current_fdc, FD_DOR);
- drive_state[current_drive].select_date = jiffies;
+ fdc_outb(fdc_state[fdc].dor & ~(0x10 << UNIT(drive)),
+ fdc, FD_DOR);
+ fdc_outb(fdc_state[fdc].dor, fdc, FD_DOR);
+ drive_state[drive].select_date = jiffies;
}
/*
- * Reset all driver information about the current fdc.
+ * Reset all driver information about the specified fdc.
* This is needed after a reset, and after a raw command.
*/
-static void reset_fdc_info(int mode)
+static void reset_fdc_info(int fdc, int mode)
{
int drive;
- fdc_state[current_fdc].spec1 = fdc_state[current_fdc].spec2 = -1;
- fdc_state[current_fdc].need_configure = 1;
- fdc_state[current_fdc].perp_mode = 1;
- fdc_state[current_fdc].rawcmd = 0;
+ fdc_state[fdc].spec1 = fdc_state[fdc].spec2 = -1;
+ fdc_state[fdc].need_configure = 1;
+ fdc_state[fdc].perp_mode = 1;
+ fdc_state[fdc].rawcmd = 0;
for (drive = 0; drive < N_DRIVE; drive++)
- if (FDC(drive) == current_fdc &&
+ if (FDC(drive) == fdc &&
(mode || drive_state[drive].track != NEED_1_RECAL))
drive_state[drive].track = NEED_2_RECAL;
}
-/* selects the fdc and drive, and enables the fdc's input/dma. */
+/*
+ * selects the fdc and drive, and enables the fdc's input/dma.
+ * Both current_drive and current_fdc are changed to match the new drive.
+ */
static void set_fdc(int drive)
{
- unsigned int new_fdc = current_fdc;
+ unsigned int fdc;
- if (drive >= 0 && drive < N_DRIVE) {
- new_fdc = FDC(drive);
- current_drive = drive;
+ if (drive < 0 || drive >= N_DRIVE) {
+ pr_info("bad drive value %d\n", drive);
+ return;
}
- if (new_fdc >= N_FDC) {
+
+ fdc = FDC(drive);
+ if (fdc >= N_FDC) {
pr_info("bad fdc value\n");
return;
}
- current_fdc = new_fdc;
- set_dor(current_fdc, ~0, 8);
+
+ set_dor(fdc, ~0, 8);
#if N_FDC > 1
- set_dor(1 - current_fdc, ~8, 0);
+ set_dor(1 - fdc, ~8, 0);
#endif
- if (fdc_state[current_fdc].rawcmd == 2)
- reset_fdc_info(1);
- if (fdc_inb(current_fdc, FD_STATUS) != STATUS_READY)
- fdc_state[current_fdc].reset = 1;
+ if (fdc_state[fdc].rawcmd == 2)
+ reset_fdc_info(fdc, 1);
+ if (fdc_inb(fdc, FD_STATUS) != STATUS_READY)
+ fdc_state[fdc].reset = 1;
+
+ current_drive = drive;
+ current_fdc = fdc;
}
-/* locks the driver */
+/*
+ * locks the driver.
+ * Both current_drive and current_fdc are changed to match the new drive.
+ */
static int lock_fdc(int drive)
{
if (WARN(atomic_read(&usage_count) == 0,
@@ -1062,12 +1068,9 @@ static void setup_DMA(void)
unsigned long f;
if (raw_cmd->length == 0) {
- int i;
-
- pr_info("zero dma transfer size:");
- for (i = 0; i < raw_cmd->cmd_count; i++)
- pr_cont("%x,", raw_cmd->cmd[i]);
- pr_cont("\n");
+ print_hex_dump(KERN_INFO, "zero dma transfer size: ",
+ DUMP_PREFIX_NONE, 16, 1,
+ raw_cmd->fullcmd, raw_cmd->cmd_count, false);
cont->done(0);
fdc_state[current_fdc].reset = 1;
return;
@@ -1104,62 +1107,62 @@ static void setup_DMA(void)
#endif
}
-static void show_floppy(void);
+static void show_floppy(int fdc);
/* waits until the fdc becomes ready */
-static int wait_til_ready(void)
+static int wait_til_ready(int fdc)
{
int status;
int counter;
- if (fdc_state[current_fdc].reset)
+ if (fdc_state[fdc].reset)
return -1;
for (counter = 0; counter < 10000; counter++) {
- status = fdc_inb(current_fdc, FD_STATUS);
+ status = fdc_inb(fdc, FD_STATUS);
if (status & STATUS_READY)
return status;
}
if (initialized) {
- DPRINT("Getstatus times out (%x) on fdc %d\n", status, current_fdc);
- show_floppy();
+ DPRINT("Getstatus times out (%x) on fdc %d\n", status, fdc);
+ show_floppy(fdc);
}
- fdc_state[current_fdc].reset = 1;
+ fdc_state[fdc].reset = 1;
return -1;
}
/* sends a command byte to the fdc */
-static int output_byte(char byte)
+static int output_byte(int fdc, char byte)
{
- int status = wait_til_ready();
+ int status = wait_til_ready(fdc);
if (status < 0)
return -1;
if (is_ready_state(status)) {
- fdc_outb(byte, current_fdc, FD_DATA);
+ fdc_outb(byte, fdc, FD_DATA);
output_log[output_log_pos].data = byte;
output_log[output_log_pos].status = status;
output_log[output_log_pos].jiffies = jiffies;
output_log_pos = (output_log_pos + 1) % OLOGSIZE;
return 0;
}
- fdc_state[current_fdc].reset = 1;
+ fdc_state[fdc].reset = 1;
if (initialized) {
DPRINT("Unable to send byte %x to FDC. Fdc=%x Status=%x\n",
- byte, current_fdc, status);
- show_floppy();
+ byte, fdc, status);
+ show_floppy(fdc);
}
return -1;
}
/* gets the response from the fdc */
-static int result(void)
+static int result(int fdc)
{
int i;
int status = 0;
- for (i = 0; i < MAX_REPLIES; i++) {
- status = wait_til_ready();
+ for (i = 0; i < FD_RAW_REPLY_SIZE; i++) {
+ status = wait_til_ready(fdc);
if (status < 0)
break;
status &= STATUS_DIR | STATUS_READY | STATUS_BUSY | STATUS_DMA;
@@ -1169,24 +1172,24 @@ static int result(void)
return i;
}
if (status == (STATUS_DIR | STATUS_READY | STATUS_BUSY))
- reply_buffer[i] = fdc_inb(current_fdc, FD_DATA);
+ reply_buffer[i] = fdc_inb(fdc, FD_DATA);
else
break;
}
if (initialized) {
DPRINT("get result error. Fdc=%d Last status=%x Read bytes=%d\n",
- current_fdc, status, i);
- show_floppy();
+ fdc, status, i);
+ show_floppy(fdc);
}
- fdc_state[current_fdc].reset = 1;
+ fdc_state[fdc].reset = 1;
return -1;
}
#define MORE_OUTPUT -2
/* does the fdc need more output? */
-static int need_more_output(void)
+static int need_more_output(int fdc)
{
- int status = wait_til_ready();
+ int status = wait_til_ready(fdc);
if (status < 0)
return -1;
@@ -1194,13 +1197,13 @@ static int need_more_output(void)
if (is_ready_state(status))
return MORE_OUTPUT;
- return result();
+ return result(fdc);
}
/* Set perpendicular mode as required, based on data rate, if supported.
* 82077 Now tested. 1Mbps data rate only possible with 82077-1.
*/
-static void perpendicular_mode(void)
+static void perpendicular_mode(int fdc)
{
unsigned char perp_mode;
@@ -1215,7 +1218,7 @@ static void perpendicular_mode(void)
default:
DPRINT("Invalid data rate for perpendicular mode!\n");
cont->done(0);
- fdc_state[current_fdc].reset = 1;
+ fdc_state[fdc].reset = 1;
/*
* convenient way to return to
* redo without too much hassle
@@ -1226,12 +1229,12 @@ static void perpendicular_mode(void)
} else
perp_mode = 0;
- if (fdc_state[current_fdc].perp_mode == perp_mode)
+ if (fdc_state[fdc].perp_mode == perp_mode)
return;
- if (fdc_state[current_fdc].version >= FDC_82077_ORIG) {
- output_byte(FD_PERPENDICULAR);
- output_byte(perp_mode);
- fdc_state[current_fdc].perp_mode = perp_mode;
+ if (fdc_state[fdc].version >= FDC_82077_ORIG) {
+ output_byte(fdc, FD_PERPENDICULAR);
+ output_byte(fdc, perp_mode);
+ fdc_state[fdc].perp_mode = perp_mode;
} else if (perp_mode) {
DPRINT("perpendicular mode not supported by this FDC.\n");
}
@@ -1240,16 +1243,15 @@ static void perpendicular_mode(void)
static int fifo_depth = 0xa;
static int no_fifo;
-static int fdc_configure(void)
+static int fdc_configure(int fdc)
{
/* Turn on FIFO */
- output_byte(FD_CONFIGURE);
- if (need_more_output() != MORE_OUTPUT)
+ output_byte(fdc, FD_CONFIGURE);
+ if (need_more_output(fdc) != MORE_OUTPUT)
return 0;
- output_byte(0);
- output_byte(0x10 | (no_fifo & 0x20) | (fifo_depth & 0xf));
- output_byte(0); /* pre-compensation from track
- 0 upwards */
+ output_byte(fdc, 0);
+ output_byte(fdc, 0x10 | (no_fifo & 0x20) | (fifo_depth & 0xf));
+ output_byte(fdc, 0); /* pre-compensation from track 0 upwards */
return 1;
}
@@ -1274,7 +1276,7 @@ static int fdc_configure(void)
*
* These values are rounded up to the next highest available delay time.
*/
-static void fdc_specify(void)
+static void fdc_specify(int fdc, int drive)
{
unsigned char spec1;
unsigned char spec2;
@@ -1286,10 +1288,10 @@ static void fdc_specify(void)
int hlt_max_code = 0x7f;
int hut_max_code = 0xf;
- if (fdc_state[current_fdc].need_configure &&
- fdc_state[current_fdc].version >= FDC_82072A) {
- fdc_configure();
- fdc_state[current_fdc].need_configure = 0;
+ if (fdc_state[fdc].need_configure &&
+ fdc_state[fdc].version >= FDC_82072A) {
+ fdc_configure(fdc);
+ fdc_state[fdc].need_configure = 0;
}
switch (raw_cmd->rate & 0x03) {
@@ -1298,13 +1300,13 @@ static void fdc_specify(void)
break;
case 1:
dtr = 300;
- if (fdc_state[current_fdc].version >= FDC_82078) {
+ if (fdc_state[fdc].version >= FDC_82078) {
/* chose the default rate table, not the one
* where 1 = 2 Mbps */
- output_byte(FD_DRIVESPEC);
- if (need_more_output() == MORE_OUTPUT) {
- output_byte(UNIT(current_drive));
- output_byte(0xc0);
+ output_byte(fdc, FD_DRIVESPEC);
+ if (need_more_output(fdc) == MORE_OUTPUT) {
+ output_byte(fdc, UNIT(drive));
+ output_byte(fdc, 0xc0);
}
}
break;
@@ -1313,14 +1315,14 @@ static void fdc_specify(void)
break;
}
- if (fdc_state[current_fdc].version >= FDC_82072) {
+ if (fdc_state[fdc].version >= FDC_82072) {
scale_dtr = dtr;
hlt_max_code = 0x00; /* 0==256msec*dtr0/dtr (not linear!) */
hut_max_code = 0x0; /* 0==256msec*dtr0/dtr (not linear!) */
}
/* Convert step rate from microseconds to milliseconds and 4 bits */
- srt = 16 - DIV_ROUND_UP(drive_params[current_drive].srt * scale_dtr / 1000,
+ srt = 16 - DIV_ROUND_UP(drive_params[drive].srt * scale_dtr / 1000,
NOMINAL_DTR);
if (slow_floppy)
srt = srt / 4;
@@ -1328,14 +1330,14 @@ static void fdc_specify(void)
SUPBOUND(srt, 0xf);
INFBOUND(srt, 0);
- hlt = DIV_ROUND_UP(drive_params[current_drive].hlt * scale_dtr / 2,
+ hlt = DIV_ROUND_UP(drive_params[drive].hlt * scale_dtr / 2,
NOMINAL_DTR);
if (hlt < 0x01)
hlt = 0x01;
else if (hlt > 0x7f)
hlt = hlt_max_code;
- hut = DIV_ROUND_UP(drive_params[current_drive].hut * scale_dtr / 16,
+ hut = DIV_ROUND_UP(drive_params[drive].hut * scale_dtr / 16,
NOMINAL_DTR);
if (hut < 0x1)
hut = 0x1;
@@ -1346,12 +1348,12 @@ static void fdc_specify(void)
spec2 = (hlt << 1) | (use_virtual_dma & 1);
/* If these parameters did not change, just return with success */
- if (fdc_state[current_fdc].spec1 != spec1 ||
- fdc_state[current_fdc].spec2 != spec2) {
+ if (fdc_state[fdc].spec1 != spec1 ||
+ fdc_state[fdc].spec2 != spec2) {
/* Go ahead and set spec1 and spec2 */
- output_byte(FD_SPECIFY);
- output_byte(fdc_state[current_fdc].spec1 = spec1);
- output_byte(fdc_state[current_fdc].spec2 = spec2);
+ output_byte(fdc, FD_SPECIFY);
+ output_byte(fdc, fdc_state[fdc].spec1 = spec1);
+ output_byte(fdc, fdc_state[fdc].spec2 = spec2);
}
} /* fdc_specify */
@@ -1513,7 +1515,7 @@ static void setup_rw_floppy(void)
r = 0;
for (i = 0; i < raw_cmd->cmd_count; i++)
- r |= output_byte(raw_cmd->cmd[i]);
+ r |= output_byte(current_fdc, raw_cmd->fullcmd[i]);
debugt(__func__, "rw_command");
@@ -1524,7 +1526,7 @@ static void setup_rw_floppy(void)
}
if (!(flags & FD_RAW_INTR)) {
- inr = result();
+ inr = result(current_fdc);
cont->interrupt();
} else if (flags & FD_RAW_NEED_DISK)
fd_watchdog();
@@ -1562,29 +1564,29 @@ static void seek_interrupt(void)
floppy_ready();
}
-static void check_wp(void)
+static void check_wp(int fdc, int drive)
{
- if (test_bit(FD_VERIFY_BIT, &drive_state[current_drive].flags)) {
+ if (test_bit(FD_VERIFY_BIT, &drive_state[drive].flags)) {
/* check write protection */
- output_byte(FD_GETSTATUS);
- output_byte(UNIT(current_drive));
- if (result() != 1) {
- fdc_state[current_fdc].reset = 1;
+ output_byte(fdc, FD_GETSTATUS);
+ output_byte(fdc, UNIT(drive));
+ if (result(fdc) != 1) {
+ fdc_state[fdc].reset = 1;
return;
}
- clear_bit(FD_VERIFY_BIT, &drive_state[current_drive].flags);
+ clear_bit(FD_VERIFY_BIT, &drive_state[drive].flags);
clear_bit(FD_NEED_TWADDLE_BIT,
- &drive_state[current_drive].flags);
- debug_dcl(drive_params[current_drive].flags,
+ &drive_state[drive].flags);
+ debug_dcl(drive_params[drive].flags,
"checking whether disk is write protected\n");
- debug_dcl(drive_params[current_drive].flags, "wp=%x\n",
+ debug_dcl(drive_params[drive].flags, "wp=%x\n",
reply_buffer[ST3] & 0x40);
if (!(reply_buffer[ST3] & 0x40))
set_bit(FD_DISK_WRITABLE_BIT,
- &drive_state[current_drive].flags);
+ &drive_state[drive].flags);
else
clear_bit(FD_DISK_WRITABLE_BIT,
- &drive_state[current_drive].flags);
+ &drive_state[drive].flags);
}
}
@@ -1628,7 +1630,7 @@ static void seek_floppy(void)
track = 1;
}
} else {
- check_wp();
+ check_wp(current_fdc, current_drive);
if (raw_cmd->track != drive_state[current_drive].track &&
(raw_cmd->flags & FD_RAW_NEED_SEEK))
track = raw_cmd->track;
@@ -1639,9 +1641,9 @@ static void seek_floppy(void)
}
do_floppy = seek_interrupt;
- output_byte(FD_SEEK);
- output_byte(UNIT(current_drive));
- if (output_byte(track) < 0) {
+ output_byte(current_fdc, FD_SEEK);
+ output_byte(current_fdc, UNIT(current_drive));
+ if (output_byte(current_fdc, track) < 0) {
reset_fdc();
return;
}
@@ -1742,14 +1744,14 @@ irqreturn_t floppy_interrupt(int irq, void *dev_id)
do_print = !handler && print_unex && initialized;
- inr = result();
+ inr = result(current_fdc);
if (do_print)
print_result("unexpected interrupt", inr);
if (inr == 0) {
int max_sensei = 4;
do {
- output_byte(FD_SENSEI);
- inr = result();
+ output_byte(current_fdc, FD_SENSEI);
+ inr = result(current_fdc);
if (do_print)
print_result("sensei", inr);
max_sensei--;
@@ -1771,8 +1773,8 @@ static void recalibrate_floppy(void)
{
debugt(__func__, "");
do_floppy = recal_interrupt;
- output_byte(FD_RECALIBRATE);
- if (output_byte(UNIT(current_drive)) < 0)
+ output_byte(current_fdc, FD_RECALIBRATE);
+ if (output_byte(current_fdc, UNIT(current_drive)) < 0)
reset_fdc();
}
@@ -1782,7 +1784,7 @@ static void recalibrate_floppy(void)
static void reset_interrupt(void)
{
debugt(__func__, "");
- result(); /* get the status ready for set_fdc */
+ result(current_fdc); /* get the status ready for set_fdc */
if (fdc_state[current_fdc].reset) {
pr_info("reset set in interrupt, calling %ps\n", cont->error);
cont->error(); /* a reset just after a reset. BAD! */
@@ -1792,7 +1794,9 @@ static void reset_interrupt(void)
/*
* reset is done by pulling bit 2 of DOR low for a while (old FDCs),
- * or by setting the self clearing bit 7 of STATUS (newer FDCs)
+ * or by setting the self clearing bit 7 of STATUS (newer FDCs).
+ * This WILL trigger an interrupt, causing the handlers in the current
+ * cont's ->redo() to be called via reset_interrupt().
*/
static void reset_fdc(void)
{
@@ -1800,7 +1804,7 @@ static void reset_fdc(void)
do_floppy = reset_interrupt;
fdc_state[current_fdc].reset = 0;
- reset_fdc_info(0);
+ reset_fdc_info(current_fdc, 0);
/* Pseudo-DMA may intercept 'reset finished' interrupt. */
/* Irrelevant for systems with true DMA (i386). */
@@ -1819,7 +1823,7 @@ static void reset_fdc(void)
}
}
-static void show_floppy(void)
+static void show_floppy(int fdc)
{
int i;
@@ -1842,7 +1846,7 @@ static void show_floppy(void)
print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 1,
reply_buffer, resultsize, true);
- pr_info("status=%x\n", fdc_inb(current_fdc, FD_STATUS));
+ pr_info("status=%x\n", fdc_inb(fdc, FD_STATUS));
pr_info("fdc_busy=%lu\n", fdc_busy);
if (do_floppy)
pr_info("do_floppy=%ps\n", do_floppy);
@@ -1868,7 +1872,7 @@ static void floppy_shutdown(struct work_struct *arg)
unsigned long flags;
if (initialized)
- show_floppy();
+ show_floppy(current_fdc);
cancel_activity();
flags = claim_dma_lock();
@@ -1934,7 +1938,7 @@ static void floppy_ready(void)
"calling disk change from floppy_ready\n");
if (!(raw_cmd->flags & FD_RAW_NO_MOTOR) &&
disk_change(current_drive) && !drive_params[current_drive].select_delay)
- twaddle(); /* this clears the dcl on certain
+ twaddle(current_fdc, current_drive); /* this clears the dcl on certain
* drive/controller combinations */
#ifdef fd_chose_dma_mode
@@ -1946,20 +1950,20 @@ static void floppy_ready(void)
#endif
if (raw_cmd->flags & (FD_RAW_NEED_SEEK | FD_RAW_NEED_DISK)) {
- perpendicular_mode();
- fdc_specify(); /* must be done here because of hut, hlt ... */
+ perpendicular_mode(current_fdc);
+ fdc_specify(current_fdc, current_drive); /* must be done here because of hut, hlt ... */
seek_floppy();
} else {
if ((raw_cmd->flags & FD_RAW_READ) ||
(raw_cmd->flags & FD_RAW_WRITE))
- fdc_specify();
+ fdc_specify(current_fdc, current_drive);
setup_rw_floppy();
}
}
static void floppy_start(void)
{
- reschedule_timeout(current_reqD, "floppy start");
+ reschedule_timeout(current_drive, "floppy start");
scandrives();
debug_dcl(drive_params[current_drive].flags,
@@ -2004,6 +2008,9 @@ static const struct cont_t intr_cont = {
.done = (done_f)empty
};
+/* schedules handler, waiting for completion. May be interrupted, will then
+ * return -EINTR, in which case the driver will automatically be unlocked.
+ */
static int wait_til_done(void (*handler)(void), bool interruptible)
{
int ret;
@@ -2059,18 +2066,19 @@ static void success_and_wakeup(void)
* ==========================
*/
-static int next_valid_format(void)
+static int next_valid_format(int drive)
{
int probed_format;
- probed_format = drive_state[current_drive].probed_format;
+ probed_format = drive_state[drive].probed_format;
while (1) {
- if (probed_format >= 8 || !drive_params[current_drive].autodetect[probed_format]) {
- drive_state[current_drive].probed_format = 0;
+ if (probed_format >= FD_AUTODETECT_SIZE ||
+ !drive_params[drive].autodetect[probed_format]) {
+ drive_state[drive].probed_format = 0;
return 1;
}
- if (floppy_type[drive_params[current_drive].autodetect[probed_format]].sect) {
- drive_state[current_drive].probed_format = probed_format;
+ if (floppy_type[drive_params[drive].autodetect[probed_format]].sect) {
+ drive_state[drive].probed_format = probed_format;
return 0;
}
probed_format++;
@@ -2083,7 +2091,7 @@ static void bad_flp_intr(void)
if (probing) {
drive_state[current_drive].probed_format++;
- if (!next_valid_format())
+ if (!next_valid_format(current_drive))
return;
}
err_count = ++(*errors);
@@ -2843,6 +2851,9 @@ static int set_next_request(void)
return current_req != NULL;
}
+/* Starts or continues processing request. Will automatically unlock the
+ * driver at end of request.
+ */
static void redo_fd_request(void)
{
int drive;
@@ -2867,7 +2878,7 @@ do_request:
}
drive = (long)current_req->rq_disk->private_data;
set_fdc(drive);
- reschedule_timeout(current_reqD, "redo fd request");
+ reschedule_timeout(current_drive, "redo fd request");
set_floppy(drive);
raw_cmd = &default_raw_cmd;
@@ -2885,7 +2896,7 @@ do_request:
if (!_floppy) { /* Autodetection */
if (!probing) {
drive_state[current_drive].probed_format = 0;
- if (next_valid_format()) {
+ if (next_valid_format(current_drive)) {
DPRINT("no autodetectable formats\n");
_floppy = NULL;
request_done(0);
@@ -2904,7 +2915,7 @@ do_request:
}
if (test_bit(FD_NEED_TWADDLE_BIT, &drive_state[current_drive].flags))
- twaddle();
+ twaddle(current_fdc, current_drive);
schedule_bh(floppy_start);
debugt(__func__, "queue fd request");
return;
@@ -2917,6 +2928,7 @@ static const struct cont_t rw_cont = {
.done = request_done
};
+/* schedule the request and automatically unlock the driver on completion */
static void process_fd_request(void)
{
cont = &rw_cont;
@@ -2938,17 +2950,17 @@ static blk_status_t floppy_queue_rq(struct blk_mq_hw_ctx *hctx,
(unsigned long long) current_req->cmd_flags))
return BLK_STS_IOERR;
- spin_lock_irq(&floppy_lock);
- list_add_tail(&bd->rq->queuelist, &floppy_reqs);
- spin_unlock_irq(&floppy_lock);
-
if (test_and_set_bit(0, &fdc_busy)) {
/* fdc busy, this new request will be treated when the
current one is done */
is_alive(__func__, "old request running");
- return BLK_STS_OK;
+ return BLK_STS_RESOURCE;
}
+ spin_lock_irq(&floppy_lock);
+ list_add_tail(&bd->rq->queuelist, &floppy_reqs);
+ spin_unlock_irq(&floppy_lock);
+
command_status = FD_COMMAND_NONE;
__reschedule_timeout(MAXTIMEOUT, "fd_request");
set_fdc(0);
@@ -2996,6 +3008,10 @@ static const struct cont_t reset_cont = {
.done = generic_done
};
+/*
+ * Resets the FDC connected to drive <drive>.
+ * Both current_drive and current_fdc are changed to match the new drive.
+ */
static int user_reset_fdc(int drive, int arg, bool interruptible)
{
int ret;
@@ -3006,6 +3022,9 @@ static int user_reset_fdc(int drive, int arg, bool interruptible)
if (arg == FD_RESET_ALWAYS)
fdc_state[current_fdc].reset = 1;
if (fdc_state[current_fdc].reset) {
+ /* note: reset_fdc will take care of unlocking the driver
+ * on completion.
+ */
cont = &reset_cont;
ret = wait_til_done(reset_fdc, interruptible);
if (ret == -EINTR)
@@ -3059,7 +3078,7 @@ static void raw_cmd_done(int flag)
raw_cmd->flags |= FD_RAW_HARDFAILURE;
} else {
raw_cmd->reply_count = inr;
- if (raw_cmd->reply_count > MAX_REPLIES)
+ if (raw_cmd->reply_count > FD_RAW_REPLY_SIZE)
raw_cmd->reply_count = 0;
for (i = 0; i < raw_cmd->reply_count; i++)
raw_cmd->reply[i] = reply_buffer[i];
@@ -3170,18 +3189,10 @@ loop:
if (ret)
return -EFAULT;
param += sizeof(struct floppy_raw_cmd);
- if (ptr->cmd_count > 33)
- /* the command may now also take up the space
- * initially intended for the reply & the
- * reply count. Needed for long 82078 commands
- * such as RESTORE, which takes ... 17 command
- * bytes. Murphy's law #137: When you reserve
- * 16 bytes for a structure, you'll one day
- * discover that you really need 17...
- */
+ if (ptr->cmd_count > FD_RAW_CMD_FULLSIZE)
return -EINVAL;
- for (i = 0; i < 16; i++)
+ for (i = 0; i < FD_RAW_REPLY_SIZE; i++)
ptr->reply[i] = 0;
ptr->resultcode = 0;
@@ -3423,13 +3434,13 @@ static int fd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
return 0;
}
-static bool valid_floppy_drive_params(const short autodetect[8],
+static bool valid_floppy_drive_params(const short autodetect[FD_AUTODETECT_SIZE],
int native_format)
{
size_t floppy_type_size = ARRAY_SIZE(floppy_type);
size_t i = 0;
- for (i = 0; i < 8; ++i) {
+ for (i = 0; i < FD_AUTODETECT_SIZE; ++i) {
if (autodetect[i] < 0 ||
autodetect[i] >= floppy_type_size)
return false;
@@ -3610,7 +3621,7 @@ static int fd_locked_ioctl(struct block_device *bdev, fmode_t mode, unsigned int
case FDTWADDLE:
if (lock_fdc(drive))
return -EINTR;
- twaddle();
+ twaddle(current_fdc, current_drive);
process_fd_request();
return 0;
default:
@@ -3654,7 +3665,7 @@ struct compat_floppy_drive_params {
struct floppy_max_errors max_errors;
char flags;
char read_track;
- short autodetect[8];
+ short autodetect[FD_AUTODETECT_SIZE];
compat_int_t checkfreq;
compat_int_t native_format;
};
@@ -4298,79 +4309,79 @@ static const struct block_device_operations floppy_fops = {
/* Determine the floppy disk controller type */
/* This routine was written by David C. Niemi */
-static char __init get_fdc_version(void)
+static char __init get_fdc_version(int fdc)
{
int r;
- output_byte(FD_DUMPREGS); /* 82072 and better know DUMPREGS */
- if (fdc_state[current_fdc].reset)
+ output_byte(fdc, FD_DUMPREGS); /* 82072 and better know DUMPREGS */
+ if (fdc_state[fdc].reset)
return FDC_NONE;
- r = result();
+ r = result(fdc);
if (r <= 0x00)
return FDC_NONE; /* No FDC present ??? */
if ((r == 1) && (reply_buffer[0] == 0x80)) {
- pr_info("FDC %d is an 8272A\n", current_fdc);
+ pr_info("FDC %d is an 8272A\n", fdc);
return FDC_8272A; /* 8272a/765 don't know DUMPREGS */
}
if (r != 10) {
pr_info("FDC %d init: DUMPREGS: unexpected return of %d bytes.\n",
- current_fdc, r);
+ fdc, r);
return FDC_UNKNOWN;
}
- if (!fdc_configure()) {
- pr_info("FDC %d is an 82072\n", current_fdc);
+ if (!fdc_configure(fdc)) {
+ pr_info("FDC %d is an 82072\n", fdc);
return FDC_82072; /* 82072 doesn't know CONFIGURE */
}
- output_byte(FD_PERPENDICULAR);
- if (need_more_output() == MORE_OUTPUT) {
- output_byte(0);
+ output_byte(fdc, FD_PERPENDICULAR);
+ if (need_more_output(fdc) == MORE_OUTPUT) {
+ output_byte(fdc, 0);
} else {
- pr_info("FDC %d is an 82072A\n", current_fdc);
+ pr_info("FDC %d is an 82072A\n", fdc);
return FDC_82072A; /* 82072A as found on Sparcs. */
}
- output_byte(FD_UNLOCK);
- r = result();
+ output_byte(fdc, FD_UNLOCK);
+ r = result(fdc);
if ((r == 1) && (reply_buffer[0] == 0x80)) {
- pr_info("FDC %d is a pre-1991 82077\n", current_fdc);
+ pr_info("FDC %d is a pre-1991 82077\n", fdc);
return FDC_82077_ORIG; /* Pre-1991 82077, doesn't know
* LOCK/UNLOCK */
}
if ((r != 1) || (reply_buffer[0] != 0x00)) {
pr_info("FDC %d init: UNLOCK: unexpected return of %d bytes.\n",
- current_fdc, r);
+ fdc, r);
return FDC_UNKNOWN;
}
- output_byte(FD_PARTID);
- r = result();
+ output_byte(fdc, FD_PARTID);
+ r = result(fdc);
if (r != 1) {
pr_info("FDC %d init: PARTID: unexpected return of %d bytes.\n",
- current_fdc, r);
+ fdc, r);
return FDC_UNKNOWN;
}
if (reply_buffer[0] == 0x80) {
- pr_info("FDC %d is a post-1991 82077\n", current_fdc);
+ pr_info("FDC %d is a post-1991 82077\n", fdc);
return FDC_82077; /* Revised 82077AA passes all the tests */
}
switch (reply_buffer[0] >> 5) {
case 0x0:
/* Either a 82078-1 or a 82078SL running at 5Volt */
- pr_info("FDC %d is an 82078.\n", current_fdc);
+ pr_info("FDC %d is an 82078.\n", fdc);
return FDC_82078;
case 0x1:
- pr_info("FDC %d is a 44pin 82078\n", current_fdc);
+ pr_info("FDC %d is a 44pin 82078\n", fdc);
return FDC_82078;
case 0x2:
- pr_info("FDC %d is a S82078B\n", current_fdc);
+ pr_info("FDC %d is a S82078B\n", fdc);
return FDC_S82078B;
case 0x3:
- pr_info("FDC %d is a National Semiconductor PC87306\n", current_fdc);
+ pr_info("FDC %d is a National Semiconductor PC87306\n", fdc);
return FDC_87306;
default:
pr_info("FDC %d init: 82078 variant with unknown PARTID=%d.\n",
- current_fdc, reply_buffer[0] >> 5);
+ fdc, reply_buffer[0] >> 5);
return FDC_82078_UNKN;
}
} /* get_fdc_version */
@@ -4534,11 +4545,13 @@ static void floppy_device_release(struct device *dev)
static int floppy_resume(struct device *dev)
{
int fdc;
+ int saved_drive;
+ saved_drive = current_drive;
for (fdc = 0; fdc < N_FDC; fdc++)
if (fdc_state[fdc].address != -1)
- user_reset_fdc(-1, FD_RESET_ALWAYS, false);
-
+ user_reset_fdc(REVDRIVE(fdc, 0), FD_RESET_ALWAYS, false);
+ set_fdc(saved_drive);
return 0;
}
@@ -4646,16 +4659,15 @@ static int __init do_floppy_init(void)
config_types();
for (i = 0; i < N_FDC; i++) {
- current_fdc = i;
- memset(&fdc_state[current_fdc], 0, sizeof(*fdc_state));
- fdc_state[current_fdc].dtr = -1;
- fdc_state[current_fdc].dor = 0x4;
+ memset(&fdc_state[i], 0, sizeof(*fdc_state));
+ fdc_state[i].dtr = -1;
+ fdc_state[i].dor = 0x4;
#if defined(__sparc__) || defined(__mc68000__)
/*sparcs/sun3x don't have a DOR reset which we can fall back on to */
#ifdef __mc68000__
if (MACH_IS_SUN3X)
#endif
- fdc_state[current_fdc].version = FDC_82072A;
+ fdc_state[i].version = FDC_82072A;
#endif
}
@@ -4697,30 +4709,29 @@ static int __init do_floppy_init(void)
msleep(10);
for (i = 0; i < N_FDC; i++) {
- current_fdc = i;
- fdc_state[current_fdc].driver_version = FD_DRIVER_VERSION;
+ fdc_state[i].driver_version = FD_DRIVER_VERSION;
for (unit = 0; unit < 4; unit++)
- fdc_state[current_fdc].track[unit] = 0;
- if (fdc_state[current_fdc].address == -1)
+ fdc_state[i].track[unit] = 0;
+ if (fdc_state[i].address == -1)
continue;
- fdc_state[current_fdc].rawcmd = 2;
- if (user_reset_fdc(-1, FD_RESET_ALWAYS, false)) {
+ fdc_state[i].rawcmd = 2;
+ if (user_reset_fdc(REVDRIVE(i, 0), FD_RESET_ALWAYS, false)) {
/* free ioports reserved by floppy_grab_irq_and_dma() */
- floppy_release_regions(current_fdc);
- fdc_state[current_fdc].address = -1;
- fdc_state[current_fdc].version = FDC_NONE;
+ floppy_release_regions(i);
+ fdc_state[i].address = -1;
+ fdc_state[i].version = FDC_NONE;
continue;
}
/* Try to determine the floppy controller type */
- fdc_state[current_fdc].version = get_fdc_version();
- if (fdc_state[current_fdc].version == FDC_NONE) {
+ fdc_state[i].version = get_fdc_version(i);
+ if (fdc_state[i].version == FDC_NONE) {
/* free ioports reserved by floppy_grab_irq_and_dma() */
- floppy_release_regions(current_fdc);
- fdc_state[current_fdc].address = -1;
+ floppy_release_regions(i);
+ fdc_state[i].address = -1;
continue;
}
if (can_use_virtual_dma == 2 &&
- fdc_state[current_fdc].version < FDC_82072A)
+ fdc_state[i].version < FDC_82072A)
can_use_virtual_dma = 0;
have_no_fdc = 0;
@@ -4728,7 +4739,7 @@ static int __init do_floppy_init(void)
* properly, so force a reset for the standard FDC clones,
* to avoid interrupt garbage.
*/
- user_reset_fdc(-1, FD_RESET_ALWAYS, false);
+ user_reset_fdc(REVDRIVE(i, 0), FD_RESET_ALWAYS, false);
}
current_fdc = 0;
cancel_delayed_work(&fd_timeout);
@@ -4855,6 +4866,8 @@ static void floppy_release_regions(int fdc)
static int floppy_grab_irq_and_dma(void)
{
+ int fdc;
+
if (atomic_inc_return(&usage_count) > 1)
return 0;
@@ -4882,24 +4895,24 @@ static int floppy_grab_irq_and_dma(void)
}
}
- for (current_fdc = 0; current_fdc < N_FDC; current_fdc++) {
- if (fdc_state[current_fdc].address != -1) {
- if (floppy_request_regions(current_fdc))
+ for (fdc = 0; fdc < N_FDC; fdc++) {
+ if (fdc_state[fdc].address != -1) {
+ if (floppy_request_regions(fdc))
goto cleanup;
}
}
- for (current_fdc = 0; current_fdc < N_FDC; current_fdc++) {
- if (fdc_state[current_fdc].address != -1) {
- reset_fdc_info(1);
- fdc_outb(fdc_state[current_fdc].dor, current_fdc, FD_DOR);
+ for (fdc = 0; fdc < N_FDC; fdc++) {
+ if (fdc_state[fdc].address != -1) {
+ reset_fdc_info(fdc, 1);
+ fdc_outb(fdc_state[fdc].dor, fdc, FD_DOR);
}
}
- current_fdc = 0;
+
set_dor(0, ~0, 8); /* avoid immediate interrupt */
- for (current_fdc = 0; current_fdc < N_FDC; current_fdc++)
- if (fdc_state[current_fdc].address != -1)
- fdc_outb(fdc_state[current_fdc].dor, current_fdc, FD_DOR);
+ for (fdc = 0; fdc < N_FDC; fdc++)
+ if (fdc_state[fdc].address != -1)
+ fdc_outb(fdc_state[fdc].dor, fdc, FD_DOR);
/*
* The driver will try and free resources and relies on us
* to know if they were allocated or not.
@@ -4910,15 +4923,16 @@ static int floppy_grab_irq_and_dma(void)
cleanup:
fd_free_irq();
fd_free_dma();
- while (--current_fdc >= 0)
- floppy_release_regions(current_fdc);
+ while (--fdc >= 0)
+ floppy_release_regions(fdc);
+ current_fdc = 0;
atomic_dec(&usage_count);
return -1;
}
static void floppy_release_irq_and_dma(void)
{
- int old_fdc;
+ int fdc;
#ifndef __sparc__
int drive;
#endif
@@ -4959,11 +4973,9 @@ static void floppy_release_irq_and_dma(void)
pr_info("auxiliary floppy timer still active\n");
if (work_pending(&floppy_work))
pr_info("work still pending\n");
- old_fdc = current_fdc;
- for (current_fdc = 0; current_fdc < N_FDC; current_fdc++)
- if (fdc_state[current_fdc].address != -1)
- floppy_release_regions(current_fdc);
- current_fdc = old_fdc;
+ for (fdc = 0; fdc < N_FDC; fdc++)
+ if (fdc_state[fdc].address != -1)
+ floppy_release_regions(fdc);
}
#ifdef MODULE