diff options
Diffstat (limited to 'drivers/block/paride/epia.c')
-rw-r--r-- | drivers/block/paride/epia.c | 316 |
1 files changed, 0 insertions, 316 deletions
diff --git a/drivers/block/paride/epia.c b/drivers/block/paride/epia.c deleted file mode 100644 index fb0e782d055e..000000000000 --- a/drivers/block/paride/epia.c +++ /dev/null @@ -1,316 +0,0 @@ -/* - epia.c (c) 1997-8 Grant R. Guenther <grant@torque.net> - Under the terms of the GNU General Public License. - - epia.c is a low-level protocol driver for Shuttle Technologies - EPIA parallel to IDE adapter chip. This device is now obsolete - and has been replaced with the EPAT chip, which is supported - by epat.c, however, some devices based on EPIA are still - available. - -*/ - -/* Changes: - - 1.01 GRG 1998.05.06 init_proto, release_proto - 1.02 GRG 1998.06.17 support older versions of EPIA - -*/ - -#define EPIA_VERSION "1.02" - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/wait.h> -#include <asm/io.h> - -#include "paride.h" - -/* mode codes: 0 nybble reads on port 1, 8-bit writes - 1 5/3 reads on ports 1 & 2, 8-bit writes - 2 8-bit reads and writes - 3 8-bit EPP mode - 4 16-bit EPP - 5 32-bit EPP -*/ - -#define j44(a,b) (((a>>4)&0x0f)+(b&0xf0)) -#define j53(a,b) (((a>>3)&0x1f)+((b<<4)&0xe0)) - -/* cont = 0 IDE register file - cont = 1 IDE control registers -*/ - -static int cont_map[2] = { 0, 0x80 }; - -static int epia_read_regr( PIA *pi, int cont, int regr ) - -{ int a, b, r; - - regr += cont_map[cont]; - - switch (pi->mode) { - - case 0: r = regr^0x39; - w0(r); w2(1); w2(3); w0(r); - a = r1(); w2(1); b = r1(); w2(4); - return j44(a,b); - - case 1: r = regr^0x31; - w0(r); w2(1); w0(r&0x37); - w2(3); w2(5); w0(r|0xf0); - a = r1(); b = r2(); w2(4); - return j53(a,b); - - case 2: r = regr^0x29; - w0(r); w2(1); w2(0X21); w2(0x23); - a = r0(); w2(4); - return a; - - case 3: - case 4: - case 5: w3(regr); w2(0x24); a = r4(); w2(4); - return a; - - } - return -1; -} - -static void epia_write_regr( PIA *pi, int cont, int regr, int val) - -{ int r; - - regr += cont_map[cont]; - - switch (pi->mode) { - - case 0: - case 1: - case 2: r = regr^0x19; - w0(r); w2(1); w0(val); w2(3); w2(4); - break; - - case 3: - case 4: - case 5: r = regr^0x40; - w3(r); w4(val); w2(4); - break; - } -} - -#define WR(r,v) epia_write_regr(pi,0,r,v) -#define RR(r) (epia_read_regr(pi,0,r)) - -/* The use of register 0x84 is entirely unclear - it seems to control - some EPP counters ... currently we know about 3 different block - sizes: the standard 512 byte reads and writes, 12 byte writes and - 2048 byte reads (the last two being used in the CDrom drivers. -*/ - -static void epia_connect ( PIA *pi ) - -{ pi->saved_r0 = r0(); - pi->saved_r2 = r2(); - - w2(4); w0(0xa0); w0(0x50); w0(0xc0); w0(0x30); w0(0xa0); w0(0); - w2(1); w2(4); - if (pi->mode >= 3) { - w0(0xa); w2(1); w2(4); w0(0x82); w2(4); w2(0xc); w2(4); - w2(0x24); w2(0x26); w2(4); - } - WR(0x86,8); -} - -static void epia_disconnect ( PIA *pi ) - -{ /* WR(0x84,0x10); */ - w0(pi->saved_r0); - w2(1); w2(4); - w0(pi->saved_r0); - w2(pi->saved_r2); -} - -static void epia_read_block( PIA *pi, char * buf, int count ) - -{ int k, ph, a, b; - - switch (pi->mode) { - - case 0: w0(0x81); w2(1); w2(3); w0(0xc1); - ph = 1; - for (k=0;k<count;k++) { - w2(2+ph); a = r1(); - w2(4+ph); b = r1(); - buf[k] = j44(a,b); - ph = 1 - ph; - } - w0(0); w2(4); - break; - - case 1: w0(0x91); w2(1); w0(0x10); w2(3); - w0(0x51); w2(5); w0(0xd1); - ph = 1; - for (k=0;k<count;k++) { - w2(4+ph); - a = r1(); b = r2(); - buf[k] = j53(a,b); - ph = 1 - ph; - } - w0(0); w2(4); - break; - - case 2: w0(0x89); w2(1); w2(0x23); w2(0x21); - ph = 1; - for (k=0;k<count;k++) { - w2(0x24+ph); - buf[k] = r0(); - ph = 1 - ph; - } - w2(6); w2(4); - break; - - case 3: if (count > 512) WR(0x84,3); - w3(0); w2(0x24); - for (k=0;k<count;k++) buf[k] = r4(); - w2(4); WR(0x84,0); - break; - - case 4: if (count > 512) WR(0x84,3); - w3(0); w2(0x24); - for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w(); - w2(4); WR(0x84,0); - break; - - case 5: if (count > 512) WR(0x84,3); - w3(0); w2(0x24); - for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l(); - w2(4); WR(0x84,0); - break; - - } -} - -static void epia_write_block( PIA *pi, char * buf, int count ) - -{ int ph, k, last, d; - - switch (pi->mode) { - - case 0: - case 1: - case 2: w0(0xa1); w2(1); w2(3); w2(1); w2(5); - ph = 0; last = 0x8000; - for (k=0;k<count;k++) { - d = buf[k]; - if (d != last) { last = d; w0(d); } - w2(4+ph); - ph = 1 - ph; - } - w2(7); w2(4); - break; - - case 3: if (count < 512) WR(0x84,1); - w3(0x40); - for (k=0;k<count;k++) w4(buf[k]); - if (count < 512) WR(0x84,0); - break; - - case 4: if (count < 512) WR(0x84,1); - w3(0x40); - for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]); - if (count < 512) WR(0x84,0); - break; - - case 5: if (count < 512) WR(0x84,1); - w3(0x40); - for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]); - if (count < 512) WR(0x84,0); - break; - - } - -} - -static int epia_test_proto( PIA *pi, char * scratch, int verbose ) - -{ int j, k, f; - int e[2] = {0,0}; - - epia_connect(pi); - for (j=0;j<2;j++) { - WR(6,0xa0+j*0x10); - for (k=0;k<256;k++) { - WR(2,k^0xaa); - WR(3,k^0x55); - if (RR(2) != (k^0xaa)) e[j]++; - } - WR(2,1); WR(3,1); - } - epia_disconnect(pi); - - f = 0; - epia_connect(pi); - WR(0x84,8); - epia_read_block(pi,scratch,512); - for (k=0;k<256;k++) { - if ((scratch[2*k] & 0xff) != ((k+1) & 0xff)) f++; - if ((scratch[2*k+1] & 0xff) != ((-2-k) & 0xff)) f++; - } - WR(0x84,0); - epia_disconnect(pi); - - if (verbose) { - printk("%s: epia: port 0x%x, mode %d, test=(%d,%d,%d)\n", - pi->device,pi->port,pi->mode,e[0],e[1],f); - } - - return (e[0] && e[1]) || f; - -} - - -static void epia_log_adapter( PIA *pi, char * scratch, int verbose ) - -{ char *mode_string[6] = {"4-bit","5/3","8-bit", - "EPP-8","EPP-16","EPP-32"}; - - printk("%s: epia %s, Shuttle EPIA at 0x%x, ", - pi->device,EPIA_VERSION,pi->port); - printk("mode %d (%s), delay %d\n",pi->mode, - mode_string[pi->mode],pi->delay); - -} - -static struct pi_protocol epia = { - .owner = THIS_MODULE, - .name = "epia", - .max_mode = 6, - .epp_first = 3, - .default_delay = 1, - .max_units = 1, - .write_regr = epia_write_regr, - .read_regr = epia_read_regr, - .write_block = epia_write_block, - .read_block = epia_read_block, - .connect = epia_connect, - .disconnect = epia_disconnect, - .test_proto = epia_test_proto, - .log_adapter = epia_log_adapter, -}; - -static int __init epia_init(void) -{ - return paride_register(&epia); -} - -static void __exit epia_exit(void) -{ - paride_unregister(&epia); -} - -MODULE_LICENSE("GPL"); -module_init(epia_init) -module_exit(epia_exit) |