diff options
Diffstat (limited to 'drivers/block/paride/on26.c')
-rw-r--r-- | drivers/block/paride/on26.c | 319 |
1 files changed, 0 insertions, 319 deletions
diff --git a/drivers/block/paride/on26.c b/drivers/block/paride/on26.c deleted file mode 100644 index 95ba256921f2..000000000000 --- a/drivers/block/paride/on26.c +++ /dev/null @@ -1,319 +0,0 @@ -/* - on26.c (c) 1997-8 Grant R. Guenther <grant@torque.net> - Under the terms of the GNU General Public License. - - on26.c is a low-level protocol driver for the - OnSpec 90c26 parallel to IDE adapter chip. - -*/ - -/* Changes: - - 1.01 GRG 1998.05.06 init_proto, release_proto - 1.02 GRG 1998.09.23 updates for the -E rev chip - 1.03 GRG 1998.12.14 fix for slave drives - 1.04 GRG 1998.12.20 yet another bug fix - -*/ - -#define ON26_VERSION "1.04" - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/wait.h> -#include <asm/io.h> - -#include "paride.h" - -/* mode codes: 0 nybble reads, 8-bit writes - 1 8-bit reads and writes - 2 8-bit EPP mode - 3 EPP-16 - 4 EPP-32 -*/ - -#define j44(a,b) (((a>>4)&0x0f)|(b&0xf0)) - -#define P1 w2(5);w2(0xd);w2(5);w2(0xd);w2(5);w2(4); -#define P2 w2(5);w2(7);w2(5);w2(4); - -/* cont = 0 - access the IDE register file - cont = 1 - access the IDE command set -*/ - -static int on26_read_regr( PIA *pi, int cont, int regr ) - -{ int a, b, r; - - r = (regr<<2) + 1 + cont; - - switch (pi->mode) { - - case 0: w0(1); P1; w0(r); P2; w0(0); P1; - w2(6); a = r1(); w2(4); - w2(6); b = r1(); w2(4); - w2(6); w2(4); w2(6); w2(4); - return j44(a,b); - - case 1: w0(1); P1; w0(r); P2; w0(0); P1; - w2(0x26); a = r0(); w2(4); w2(0x26); w2(4); - return a; - - case 2: - case 3: - case 4: w3(1); w3(1); w2(5); w4(r); w2(4); - w3(0); w3(0); w2(0x24); a = r4(); w2(4); - w2(0x24); (void)r4(); w2(4); - return a; - - } - return -1; -} - -static void on26_write_regr( PIA *pi, int cont, int regr, int val ) - -{ int r; - - r = (regr<<2) + 1 + cont; - - switch (pi->mode) { - - case 0: - case 1: w0(1); P1; w0(r); P2; w0(0); P1; - w0(val); P2; w0(val); P2; - break; - - case 2: - case 3: - case 4: w3(1); w3(1); w2(5); w4(r); w2(4); - w3(0); w3(0); - w2(5); w4(val); w2(4); - w2(5); w4(val); w2(4); - break; - } -} - -#define CCP(x) w0(0xfe);w0(0xaa);w0(0x55);w0(0);w0(0xff);\ - w0(0x87);w0(0x78);w0(x);w2(4);w2(5);w2(4);w0(0xff); - -static void on26_connect ( PIA *pi ) - -{ int x; - - pi->saved_r0 = r0(); - pi->saved_r2 = r2(); - - CCP(0x20); - x = 8; if (pi->mode) x = 9; - - w0(2); P1; w0(8); P2; - w0(2); P1; w0(x); P2; -} - -static void on26_disconnect ( PIA *pi ) - -{ if (pi->mode >= 2) { w3(4); w3(4); w3(4); w3(4); } - else { w0(4); P1; w0(4); P1; } - CCP(0x30); - w0(pi->saved_r0); - w2(pi->saved_r2); -} - -#define RESET_WAIT 200 - -static int on26_test_port( PIA *pi) /* hard reset */ - -{ int i, m, d, x=0, y=0; - - pi->saved_r0 = r0(); - pi->saved_r2 = r2(); - - d = pi->delay; - m = pi->mode; - pi->delay = 5; - pi->mode = 0; - - w2(0xc); - - CCP(0x30); CCP(0); - - w0(0xfe);w0(0xaa);w0(0x55);w0(0);w0(0xff); - i = ((r1() & 0xf0) << 4); w0(0x87); - i |= (r1() & 0xf0); w0(0x78); - w0(0x20);w2(4);w2(5); - i |= ((r1() & 0xf0) >> 4); - w2(4);w0(0xff); - - if (i == 0xb5f) { - - w0(2); P1; w0(0); P2; - w0(3); P1; w0(0); P2; - w0(2); P1; w0(8); P2; udelay(100); - w0(2); P1; w0(0xa); P2; udelay(100); - w0(2); P1; w0(8); P2; udelay(1000); - - on26_write_regr(pi,0,6,0xa0); - - for (i=0;i<RESET_WAIT;i++) { - on26_write_regr(pi,0,6,0xa0); - x = on26_read_regr(pi,0,7); - on26_write_regr(pi,0,6,0xb0); - y = on26_read_regr(pi,0,7); - if (!((x&0x80)||(y&0x80))) break; - mdelay(100); - } - - if (i == RESET_WAIT) - printk("on26: Device reset failed (%x,%x)\n",x,y); - - w0(4); P1; w0(4); P1; - } - - CCP(0x30); - - pi->delay = d; - pi->mode = m; - w0(pi->saved_r0); - w2(pi->saved_r2); - - return 5; -} - - -static void on26_read_block( PIA *pi, char * buf, int count ) - -{ int k, a, b; - - switch (pi->mode) { - - case 0: w0(1); P1; w0(1); P2; w0(2); P1; w0(0x18); P2; w0(0); P1; - udelay(10); - for (k=0;k<count;k++) { - w2(6); a = r1(); - w2(4); b = r1(); - buf[k] = j44(a,b); - } - w0(2); P1; w0(8); P2; - break; - - case 1: w0(1); P1; w0(1); P2; w0(2); P1; w0(0x19); P2; w0(0); P1; - udelay(10); - for (k=0;k<count/2;k++) { - w2(0x26); buf[2*k] = r0(); - w2(0x24); buf[2*k+1] = r0(); - } - w0(2); P1; w0(9); P2; - break; - - case 2: w3(1); w3(1); w2(5); w4(1); w2(4); - w3(0); w3(0); w2(0x24); - udelay(10); - for (k=0;k<count;k++) buf[k] = r4(); - w2(4); - break; - - case 3: w3(1); w3(1); w2(5); w4(1); w2(4); - w3(0); w3(0); w2(0x24); - udelay(10); - for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w(); - w2(4); - break; - - case 4: w3(1); w3(1); w2(5); w4(1); w2(4); - w3(0); w3(0); w2(0x24); - udelay(10); - for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l(); - w2(4); - break; - - } -} - -static void on26_write_block( PIA *pi, char * buf, int count ) - -{ int k; - - switch (pi->mode) { - - case 0: - case 1: w0(1); P1; w0(1); P2; - w0(2); P1; w0(0x18+pi->mode); P2; w0(0); P1; - udelay(10); - for (k=0;k<count/2;k++) { - w2(5); w0(buf[2*k]); - w2(7); w0(buf[2*k+1]); - } - w2(5); w2(4); - w0(2); P1; w0(8+pi->mode); P2; - break; - - case 2: w3(1); w3(1); w2(5); w4(1); w2(4); - w3(0); w3(0); w2(0xc5); - udelay(10); - for (k=0;k<count;k++) w4(buf[k]); - w2(0xc4); - break; - - case 3: w3(1); w3(1); w2(5); w4(1); w2(4); - w3(0); w3(0); w2(0xc5); - udelay(10); - for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]); - w2(0xc4); - break; - - case 4: w3(1); w3(1); w2(5); w4(1); w2(4); - w3(0); w3(0); w2(0xc5); - udelay(10); - for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]); - w2(0xc4); - break; - - } - -} - -static void on26_log_adapter( PIA *pi, char * scratch, int verbose ) - -{ char *mode_string[5] = {"4-bit","8-bit","EPP-8", - "EPP-16","EPP-32"}; - - printk("%s: on26 %s, OnSpec 90c26 at 0x%x, ", - pi->device,ON26_VERSION,pi->port); - printk("mode %d (%s), delay %d\n",pi->mode, - mode_string[pi->mode],pi->delay); - -} - -static struct pi_protocol on26 = { - .owner = THIS_MODULE, - .name = "on26", - .max_mode = 5, - .epp_first = 2, - .default_delay = 1, - .max_units = 1, - .write_regr = on26_write_regr, - .read_regr = on26_read_regr, - .write_block = on26_write_block, - .read_block = on26_read_block, - .connect = on26_connect, - .disconnect = on26_disconnect, - .test_port = on26_test_port, - .log_adapter = on26_log_adapter, -}; - -static int __init on26_init(void) -{ - return paride_register(&on26); -} - -static void __exit on26_exit(void) -{ - paride_unregister(&on26); -} - -MODULE_LICENSE("GPL"); -module_init(on26_init) -module_exit(on26_exit) |