summaryrefslogtreecommitdiff
path: root/drivers/block/smart1,2.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/block/smart1,2.h')
-rw-r--r--drivers/block/smart1,2.h278
1 files changed, 278 insertions, 0 deletions
diff --git a/drivers/block/smart1,2.h b/drivers/block/smart1,2.h
new file mode 100644
index 000000000000..a0b403a6b4ed
--- /dev/null
+++ b/drivers/block/smart1,2.h
@@ -0,0 +1,278 @@
+/*
+ * Disk Array driver for Compaq SMART2 Controllers
+ * Copyright 1998 Compaq Computer Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Questions/Comments/Bugfixes to iss_storagedev@hp.com
+ *
+ * If you want to make changes, improve or add functionality to this
+ * driver, you'll probably need the Compaq Array Controller Interface
+ * Specificiation (Document number ECG086/1198)
+ */
+
+/*
+ * This file contains the controller communication implementation for
+ * Compaq SMART-1 and SMART-2 controllers. To the best of my knowledge,
+ * this should support:
+ *
+ * PCI:
+ * SMART-2/P, SMART-2DH, SMART-2SL, SMART-221, SMART-3100ES, SMART-3200
+ * Integerated SMART Array Controller, SMART-4200, SMART-4250ES
+ *
+ * EISA:
+ * SMART-2/E, SMART, IAES, IDA-2, IDA
+ */
+
+/*
+ * Memory mapped FIFO interface (SMART 42xx cards)
+ */
+static void smart4_submit_command(ctlr_info_t *h, cmdlist_t *c)
+{
+ writel(c->busaddr, h->vaddr + S42XX_REQUEST_PORT_OFFSET);
+}
+
+/*
+ * This card is the opposite of the other cards.
+ * 0 turns interrupts on...
+ * 0x08 turns them off...
+ */
+static void smart4_intr_mask(ctlr_info_t *h, unsigned long val)
+{
+ if (val)
+ { /* Turn interrupts on */
+ writel(0, h->vaddr + S42XX_REPLY_INTR_MASK_OFFSET);
+ } else /* Turn them off */
+ {
+ writel( S42XX_INTR_OFF,
+ h->vaddr + S42XX_REPLY_INTR_MASK_OFFSET);
+ }
+}
+
+/*
+ * For older cards FIFO Full = 0.
+ * On this card 0 means there is room, anything else FIFO Full.
+ *
+ */
+static unsigned long smart4_fifo_full(ctlr_info_t *h)
+{
+
+ return (!readl(h->vaddr + S42XX_REQUEST_PORT_OFFSET));
+}
+
+/* This type of controller returns -1 if the fifo is empty,
+ * Not 0 like the others.
+ * And we need to let it know we read a value out
+ */
+static unsigned long smart4_completed(ctlr_info_t *h)
+{
+ long register_value
+ = readl(h->vaddr + S42XX_REPLY_PORT_OFFSET);
+
+ /* Fifo is empty */
+ if( register_value == 0xffffffff)
+ return 0;
+
+ /* Need to let it know we got the reply */
+ /* We do this by writing a 0 to the port we just read from */
+ writel(0, h->vaddr + S42XX_REPLY_PORT_OFFSET);
+
+ return ((unsigned long) register_value);
+}
+
+ /*
+ * This hardware returns interrupt pending at a different place and
+ * it does not tell us if the fifo is empty, we will have check
+ * that by getting a 0 back from the comamnd_completed call.
+ */
+static unsigned long smart4_intr_pending(ctlr_info_t *h)
+{
+ unsigned long register_value =
+ readl(h->vaddr + S42XX_INTR_STATUS);
+
+ if( register_value & S42XX_INTR_PENDING)
+ return FIFO_NOT_EMPTY;
+ return 0 ;
+}
+
+static struct access_method smart4_access = {
+ smart4_submit_command,
+ smart4_intr_mask,
+ smart4_fifo_full,
+ smart4_intr_pending,
+ smart4_completed,
+};
+
+/*
+ * Memory mapped FIFO interface (PCI SMART2 and SMART 3xxx cards)
+ */
+static void smart2_submit_command(ctlr_info_t *h, cmdlist_t *c)
+{
+ writel(c->busaddr, h->vaddr + COMMAND_FIFO);
+}
+
+static void smart2_intr_mask(ctlr_info_t *h, unsigned long val)
+{
+ writel(val, h->vaddr + INTR_MASK);
+}
+
+static unsigned long smart2_fifo_full(ctlr_info_t *h)
+{
+ return readl(h->vaddr + COMMAND_FIFO);
+}
+
+static unsigned long smart2_completed(ctlr_info_t *h)
+{
+ return readl(h->vaddr + COMMAND_COMPLETE_FIFO);
+}
+
+static unsigned long smart2_intr_pending(ctlr_info_t *h)
+{
+ return readl(h->vaddr + INTR_PENDING);
+}
+
+static struct access_method smart2_access = {
+ smart2_submit_command,
+ smart2_intr_mask,
+ smart2_fifo_full,
+ smart2_intr_pending,
+ smart2_completed,
+};
+
+/*
+ * IO access for SMART-2/E cards
+ */
+static void smart2e_submit_command(ctlr_info_t *h, cmdlist_t *c)
+{
+ outl(c->busaddr, h->io_mem_addr + COMMAND_FIFO);
+}
+
+static void smart2e_intr_mask(ctlr_info_t *h, unsigned long val)
+{
+ outl(val, h->io_mem_addr + INTR_MASK);
+}
+
+static unsigned long smart2e_fifo_full(ctlr_info_t *h)
+{
+ return inl(h->io_mem_addr + COMMAND_FIFO);
+}
+
+static unsigned long smart2e_completed(ctlr_info_t *h)
+{
+ return inl(h->io_mem_addr + COMMAND_COMPLETE_FIFO);
+}
+
+static unsigned long smart2e_intr_pending(ctlr_info_t *h)
+{
+ return inl(h->io_mem_addr + INTR_PENDING);
+}
+
+static struct access_method smart2e_access = {
+ smart2e_submit_command,
+ smart2e_intr_mask,
+ smart2e_fifo_full,
+ smart2e_intr_pending,
+ smart2e_completed,
+};
+
+/*
+ * IO access for older SMART-1 type cards
+ */
+#define SMART1_SYSTEM_MASK 0xC8E
+#define SMART1_SYSTEM_DOORBELL 0xC8F
+#define SMART1_LOCAL_MASK 0xC8C
+#define SMART1_LOCAL_DOORBELL 0xC8D
+#define SMART1_INTR_MASK 0xC89
+#define SMART1_LISTADDR 0xC90
+#define SMART1_LISTLEN 0xC94
+#define SMART1_TAG 0xC97
+#define SMART1_COMPLETE_ADDR 0xC98
+#define SMART1_LISTSTATUS 0xC9E
+
+#define CHANNEL_BUSY 0x01
+#define CHANNEL_CLEAR 0x02
+
+static void smart1_submit_command(ctlr_info_t *h, cmdlist_t *c)
+{
+ /*
+ * This __u16 is actually a bunch of control flags on SMART
+ * and below. We want them all to be zero.
+ */
+ c->hdr.size = 0;
+
+ outb(CHANNEL_CLEAR, h->io_mem_addr + SMART1_SYSTEM_DOORBELL);
+
+ outl(c->busaddr, h->io_mem_addr + SMART1_LISTADDR);
+ outw(c->size, h->io_mem_addr + SMART1_LISTLEN);
+
+ outb(CHANNEL_BUSY, h->io_mem_addr + SMART1_LOCAL_DOORBELL);
+}
+
+static void smart1_intr_mask(ctlr_info_t *h, unsigned long val)
+{
+ if (val == 1) {
+ outb(0xFD, h->io_mem_addr + SMART1_SYSTEM_DOORBELL);
+ outb(CHANNEL_BUSY, h->io_mem_addr + SMART1_LOCAL_DOORBELL);
+ outb(0x01, h->io_mem_addr + SMART1_INTR_MASK);
+ outb(0x01, h->io_mem_addr + SMART1_SYSTEM_MASK);
+ } else {
+ outb(0, h->io_mem_addr + 0xC8E);
+ }
+}
+
+static unsigned long smart1_fifo_full(ctlr_info_t *h)
+{
+ unsigned char chan;
+ chan = inb(h->io_mem_addr + SMART1_SYSTEM_DOORBELL) & CHANNEL_CLEAR;
+ return chan;
+}
+
+static unsigned long smart1_completed(ctlr_info_t *h)
+{
+ unsigned char status;
+ unsigned long cmd;
+
+ if (inb(h->io_mem_addr + SMART1_SYSTEM_DOORBELL) & CHANNEL_BUSY) {
+ outb(CHANNEL_BUSY, h->io_mem_addr + SMART1_SYSTEM_DOORBELL);
+
+ cmd = inl(h->io_mem_addr + SMART1_COMPLETE_ADDR);
+ status = inb(h->io_mem_addr + SMART1_LISTSTATUS);
+
+ outb(CHANNEL_CLEAR, h->io_mem_addr + SMART1_LOCAL_DOORBELL);
+
+ /*
+ * this is x86 (actually compaq x86) only, so it's ok
+ */
+ if (cmd) ((cmdlist_t*)bus_to_virt(cmd))->req.hdr.rcode = status;
+ } else {
+ cmd = 0;
+ }
+ return cmd;
+}
+
+static unsigned long smart1_intr_pending(ctlr_info_t *h)
+{
+ unsigned char chan;
+ chan = inb(h->io_mem_addr + SMART1_SYSTEM_DOORBELL) & CHANNEL_BUSY;
+ return chan;
+}
+
+static struct access_method smart1_access = {
+ smart1_submit_command,
+ smart1_intr_mask,
+ smart1_fifo_full,
+ smart1_intr_pending,
+ smart1_completed,
+};