diff options
Diffstat (limited to 'drivers/bluetooth/btrtl.c')
| -rw-r--r-- | drivers/bluetooth/btrtl.c | 53 |
1 files changed, 45 insertions, 8 deletions
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c index 277d039ecbb4..d3eba0d4a57d 100644 --- a/drivers/bluetooth/btrtl.c +++ b/drivers/bluetooth/btrtl.c @@ -7,7 +7,7 @@ #include <linux/module.h> #include <linux/firmware.h> -#include <asm/unaligned.h> +#include <linux/unaligned.h> #include <linux/usb.h> #include <net/bluetooth/bluetooth.h> @@ -30,6 +30,7 @@ #define RTL_ROM_LMP_8822B 0x8822 #define RTL_ROM_LMP_8852A 0x8852 #define RTL_ROM_LMP_8851B 0x8851 +#define RTL_ROM_LMP_8922A 0x8922 #define RTL_CONFIG_MAGIC 0x8723ab55 #define RTL_VSC_OP_COREDUMP 0xfcff @@ -69,6 +70,8 @@ enum btrtl_chip_id { CHIP_ID_8852B = 20, CHIP_ID_8852C = 25, CHIP_ID_8851B = 36, + CHIP_ID_8922A = 44, + CHIP_ID_8852BT = 47, }; struct id_table { @@ -307,6 +310,24 @@ static const struct id_table ic_id_table[] = { .fw_name = "rtl_bt/rtl8851bu_fw", .cfg_name = "rtl_bt/rtl8851bu_config", .hw_info = "rtl8851bu" }, + + /* 8922A */ + { IC_INFO(RTL_ROM_LMP_8922A, 0xa, 0xc, HCI_USB), + .config_needed = false, + .has_rom_version = true, + .has_msft_ext = true, + .fw_name = "rtl_bt/rtl8922au_fw", + .cfg_name = "rtl_bt/rtl8922au_config", + .hw_info = "rtl8922au" }, + + /* 8852BT/8852BE-VT */ + { IC_INFO(RTL_ROM_LMP_8852A, 0x87, 0xc, HCI_USB), + .config_needed = false, + .has_rom_version = true, + .has_msft_ext = true, + .fw_name = "rtl_bt/rtl8852btu_fw", + .cfg_name = "rtl_bt/rtl8852btu_config", + .hw_info = "rtl8852btu" }, }; static const struct id_table *btrtl_match_ic(u16 lmp_subver, u16 hci_rev, @@ -645,6 +666,8 @@ static int rtlbt_parse_firmware(struct hci_dev *hdev, { RTL_ROM_LMP_8852A, 20 }, /* 8852B */ { RTL_ROM_LMP_8852A, 25 }, /* 8852C */ { RTL_ROM_LMP_8851B, 36 }, /* 8851B */ + { RTL_ROM_LMP_8922A, 44 }, /* 8922A */ + { RTL_ROM_LMP_8852A, 47 }, /* 8852BT */ }; if (btrtl_dev->fw_len <= 8) @@ -800,7 +823,7 @@ static int rtl_download_firmware(struct hci_dev *hdev, struct sk_buff *skb; struct hci_rp_read_local_version *rp; - dl_cmd = kmalloc(sizeof(struct rtl_download_cmd), GFP_KERNEL); + dl_cmd = kmalloc(sizeof(*dl_cmd), GFP_KERNEL); if (!dl_cmd) return -ENOMEM; @@ -867,10 +890,8 @@ static int rtl_load_file(struct hci_dev *hdev, const char *name, u8 **buff) if (ret < 0) return ret; ret = fw->size; - *buff = kvmalloc(fw->size, GFP_KERNEL); - if (*buff) - memcpy(*buff, fw->data, ret); - else + *buff = kvmemdup(fw->data, fw->size, GFP_KERNEL); + if (!*buff) ret = -ENOMEM; release_firmware(fw); @@ -1244,6 +1265,7 @@ int btrtl_download_firmware(struct hci_dev *hdev, case RTL_ROM_LMP_8852A: case RTL_ROM_LMP_8703B: case RTL_ROM_LMP_8851B: + case RTL_ROM_LMP_8922A: err = btrtl_setup_rtl8723b(hdev, btrtl_dev); break; default: @@ -1275,7 +1297,8 @@ void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev) case CHIP_ID_8852B: case CHIP_ID_8852C: case CHIP_ID_8851B: - set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks); + case CHIP_ID_8922A: + case CHIP_ID_8852BT: set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks); /* RTL8852C needs to transmit mSBC data continuously without @@ -1285,6 +1308,7 @@ void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev) btrealtek_set_flag(hdev, REALTEK_ALT6_CONTINUOUS_TX_CHIP); if (btrtl_dev->project_id == CHIP_ID_8852A || + btrtl_dev->project_id == CHIP_ID_8852B || btrtl_dev->project_id == CHIP_ID_8852C) set_bit(HCI_QUIRK_USE_MSFT_EXT_ADDRESS_FILTER, &hdev->quirks); @@ -1327,6 +1351,15 @@ int btrtl_setup_realtek(struct hci_dev *hdev) btrtl_set_quirks(hdev, btrtl_dev); + if (btrtl_dev->ic_info) { + hci_set_hw_info(hdev, + "RTL lmp_subver=%u hci_rev=%u hci_ver=%u hci_bus=%u", + btrtl_dev->ic_info->lmp_subver, + btrtl_dev->ic_info->hci_rev, + btrtl_dev->ic_info->hci_ver, + btrtl_dev->ic_info->hci_bus); + } + btrtl_free(btrtl_dev); return ret; } @@ -1340,7 +1373,7 @@ int btrtl_shutdown_realtek(struct hci_dev *hdev) /* According to the vendor driver, BT must be reset on close to avoid * firmware crash. */ - skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT); + skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_CMD_TIMEOUT); if (IS_ERR(skb)) { ret = PTR_ERR(skb); bt_dev_err(hdev, "HCI reset during shutdown failed"); @@ -1505,6 +1538,10 @@ MODULE_FIRMWARE("rtl_bt/rtl8852bs_fw.bin"); MODULE_FIRMWARE("rtl_bt/rtl8852bs_config.bin"); MODULE_FIRMWARE("rtl_bt/rtl8852bu_fw.bin"); MODULE_FIRMWARE("rtl_bt/rtl8852bu_config.bin"); +MODULE_FIRMWARE("rtl_bt/rtl8852btu_fw.bin"); +MODULE_FIRMWARE("rtl_bt/rtl8852btu_config.bin"); MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin"); MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw_v2.bin"); MODULE_FIRMWARE("rtl_bt/rtl8852cu_config.bin"); +MODULE_FIRMWARE("rtl_bt/rtl8922au_fw.bin"); +MODULE_FIRMWARE("rtl_bt/rtl8922au_config.bin"); |