summaryrefslogtreecommitdiff
path: root/drivers/char/ftape/lowlevel/ftape-io.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/char/ftape/lowlevel/ftape-io.c')
-rw-r--r--drivers/char/ftape/lowlevel/ftape-io.c992
1 files changed, 992 insertions, 0 deletions
diff --git a/drivers/char/ftape/lowlevel/ftape-io.c b/drivers/char/ftape/lowlevel/ftape-io.c
new file mode 100644
index 000000000000..259015aeff55
--- /dev/null
+++ b/drivers/char/ftape/lowlevel/ftape-io.c
@@ -0,0 +1,992 @@
+/*
+ * Copyright (C) 1993-1996 Bas Laarhoven,
+ * (C) 1996 Kai Harrekilde-Petersen,
+ * (C) 1997 Claus-Justus Heine.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING. If not, write to
+ the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+ *
+ * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-io.c,v $
+ * $Revision: 1.4 $
+ * $Date: 1997/11/11 14:02:36 $
+ *
+ * This file contains the general control functions for the
+ * QIC-40/80/3010/3020 floppy-tape driver "ftape" for Linux.
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <asm/system.h>
+#include <linux/ioctl.h>
+#include <linux/mtio.h>
+#include <linux/delay.h>
+
+#include <linux/ftape.h>
+#include <linux/qic117.h>
+#include "../lowlevel/ftape-tracing.h"
+#include "../lowlevel/fdc-io.h"
+#include "../lowlevel/ftape-io.h"
+#include "../lowlevel/ftape-ctl.h"
+#include "../lowlevel/ftape-rw.h"
+#include "../lowlevel/ftape-write.h"
+#include "../lowlevel/ftape-read.h"
+#include "../lowlevel/ftape-init.h"
+#include "../lowlevel/ftape-calibr.h"
+
+/* Global vars.
+ */
+/* NOTE: sectors start numbering at 1, all others at 0 ! */
+ft_timeout_table ftape_timeout;
+unsigned int ftape_tape_len;
+volatile qic117_cmd_t ftape_current_command;
+const struct qic117_command_table qic117_cmds[] = QIC117_COMMANDS;
+int ftape_might_be_off_track;
+
+/* Local vars.
+ */
+static int diagnostic_mode;
+static unsigned int ftape_udelay_count;
+static unsigned int ftape_udelay_time;
+
+void ftape_udelay(unsigned int usecs)
+{
+ volatile int count = (ftape_udelay_count * usecs +
+ ftape_udelay_count - 1) / ftape_udelay_time;
+ volatile int i;
+
+ while (count-- > 0) {
+ for (i = 0; i < 20; ++i);
+ }
+}
+
+void ftape_udelay_calibrate(void)
+{
+ ftape_calibrate("ftape_udelay",
+ ftape_udelay, &ftape_udelay_count, &ftape_udelay_time);
+}
+
+/* Delay (msec) routine.
+ */
+void ftape_sleep(unsigned int time)
+{
+ TRACE_FUN(ft_t_any);
+
+ time *= 1000; /* msecs -> usecs */
+ if (time < FT_USPT) {
+ /* Time too small for scheduler, do a busy wait ! */
+ ftape_udelay(time);
+ } else {
+ long timeout;
+ unsigned long flags;
+ unsigned int ticks = (time + FT_USPT - 1) / FT_USPT;
+
+ TRACE(ft_t_any, "%d msec, %d ticks", time/1000, ticks);
+ timeout = ticks;
+ save_flags(flags);
+ sti();
+ msleep_interruptible(jiffies_to_msecs(timeout));
+ /* Mmm. Isn't current->blocked == 0xffffffff ?
+ */
+ if (signal_pending(current)) {
+ TRACE(ft_t_err, "awoken by non-blocked signal :-(");
+ }
+ restore_flags(flags);
+ }
+ TRACE_EXIT;
+}
+
+/* send a command or parameter to the drive
+ * Generates # of step pulses.
+ */
+static inline int ft_send_to_drive(int arg)
+{
+ /* Always wait for a command_timeout period to separate
+ * individuals commands and/or parameters.
+ */
+ ftape_sleep(3 * FT_MILLISECOND);
+ /* Keep cylinder nr within range, step towards home if possible.
+ */
+ if (ftape_current_cylinder >= arg) {
+ return fdc_seek(ftape_current_cylinder - arg);
+ } else {
+ return fdc_seek(ftape_current_cylinder + arg);
+ }
+}
+
+/* forward */ int ftape_report_raw_drive_status(int *status);
+
+static int ft_check_cmd_restrictions(qic117_cmd_t command)
+{
+ int status = -1;
+ TRACE_FUN(ft_t_any);
+
+ TRACE(ft_t_flow, "%s", qic117_cmds[command].name);
+ /* A new motion command during an uninterruptible (motion)
+ * command requires a ready status before the new command can
+ * be issued. Otherwise a new motion command needs to be
+ * checked against required status.
+ */
+ if (qic117_cmds[command].cmd_type == motion &&
+ qic117_cmds[ftape_current_command].non_intr) {
+ ftape_report_raw_drive_status(&status);
+ if ((status & QIC_STATUS_READY) == 0) {
+ TRACE(ft_t_noise,
+ "motion cmd (%d) during non-intr cmd (%d)",
+ command, ftape_current_command);
+ TRACE(ft_t_noise, "waiting until drive gets ready");
+ ftape_ready_wait(ftape_timeout.seek,
+ &status);
+ }
+ }
+ if (qic117_cmds[command].mask != 0) {
+ __u8 difference;
+ /* Some commands do require a certain status:
+ */
+ if (status == -1) { /* not yet set */
+ ftape_report_raw_drive_status(&status);
+ }
+ difference = ((status ^ qic117_cmds[command].state) &
+ qic117_cmds[command].mask);
+ /* Wait until the drive gets
+ * ready. This may last forever if
+ * the drive never gets ready...
+ */
+ while ((difference & QIC_STATUS_READY) != 0) {
+ TRACE(ft_t_noise, "command %d issued while not ready",
+ command);
+ TRACE(ft_t_noise, "waiting until drive gets ready");
+ if (ftape_ready_wait(ftape_timeout.seek,
+ &status) == -EINTR) {
+ /* Bail out on signal !
+ */
+ TRACE_ABORT(-EINTR, ft_t_warn,
+ "interrupted by non-blockable signal");
+ }
+ difference = ((status ^ qic117_cmds[command].state) &
+ qic117_cmds[command].mask);
+ }
+ while ((difference & QIC_STATUS_ERROR) != 0) {
+ int err;
+ qic117_cmd_t cmd;
+
+ TRACE(ft_t_noise,
+ "command %d issued while error pending",
+ command);
+ TRACE(ft_t_noise, "clearing error status");
+ ftape_report_error(&err, &cmd, 1);
+ ftape_report_raw_drive_status(&status);
+ difference = ((status ^ qic117_cmds[command].state) &
+ qic117_cmds[command].mask);
+ if ((difference & QIC_STATUS_ERROR) != 0) {
+ /* Bail out on fatal signal !
+ */
+ FT_SIGNAL_EXIT(_NEVER_BLOCK);
+ }
+ }
+ if (difference) {
+ /* Any remaining difference can't be solved
+ * here.
+ */
+ if (difference & (QIC_STATUS_CARTRIDGE_PRESENT |
+ QIC_STATUS_NEW_CARTRIDGE |
+ QIC_STATUS_REFERENCED)) {
+ TRACE(ft_t_warn,
+ "Fatal: tape removed or reinserted !");
+ ft_failure = 1;
+ } else {
+ TRACE(ft_t_err, "wrong state: 0x%02x should be: 0x%02x",
+ status & qic117_cmds[command].mask,
+ qic117_cmds[command].state);
+ }
+ TRACE_EXIT -EIO;
+ }
+ if (~status & QIC_STATUS_READY & qic117_cmds[command].mask) {
+ TRACE_ABORT(-EBUSY, ft_t_err, "Bad: still busy!");
+ }
+ }
+ TRACE_EXIT 0;
+}
+
+/* Issue a tape command:
+ */
+int ftape_command(qic117_cmd_t command)
+{
+ int result = 0;
+ static int level;
+ TRACE_FUN(ft_t_any);
+
+ if ((unsigned int)command > NR_ITEMS(qic117_cmds)) {
+ /* This is a bug we'll want to know about too.
+ */
+ TRACE_ABORT(-EIO, ft_t_bug, "bug - bad command: %d", command);
+ }
+ if (++level > 5) { /* This is a bug we'll want to know about. */
+ --level;
+ TRACE_ABORT(-EIO, ft_t_bug, "bug - recursion for command: %d",
+ command);
+ }
+ /* disable logging and restriction check for some commands,
+ * check all other commands that have a prescribed starting
+ * status.
+ */
+ if (diagnostic_mode) {
+ TRACE(ft_t_flow, "diagnostic command %d", command);
+ } else if (command == QIC_REPORT_DRIVE_STATUS ||
+ command == QIC_REPORT_NEXT_BIT) {
+ TRACE(ft_t_any, "%s", qic117_cmds[command].name);
+ } else {
+ TRACE_CATCH(ft_check_cmd_restrictions(command), --level);
+ }
+ /* Now all conditions are met or result was < 0.
+ */
+ result = ft_send_to_drive((unsigned int)command);
+ if (qic117_cmds[command].cmd_type == motion &&
+ command != QIC_LOGICAL_FORWARD && command != QIC_STOP_TAPE) {
+ ft_location.known = 0;
+ }
+ ftape_current_command = command;
+ --level;
+ TRACE_EXIT result;
+}
+
+/* Send a tape command parameter:
+ * Generates command # of step pulses.
+ * Skips tape-status call !
+ */
+int ftape_parameter(unsigned int parameter)
+{
+ TRACE_FUN(ft_t_any);
+
+ TRACE(ft_t_flow, "called with parameter = %d", parameter);
+ TRACE_EXIT ft_send_to_drive(parameter + 2);
+}
+
+/* Wait for the drive to get ready.
+ * timeout time in milli-seconds
+ * Returned status is valid if result != -EIO
+ *
+ * Should we allow to be killed by SIGINT? (^C)
+ * Would be nice at least for large timeouts.
+ */
+int ftape_ready_wait(unsigned int timeout, int *status)
+{
+ unsigned long t0;
+ unsigned int poll_delay;
+ int signal_retries;
+ TRACE_FUN(ft_t_any);
+
+ /* the following ** REALLY ** reduces the system load when
+ * e.g. one simply rewinds or retensions. The tape is slow
+ * anyway. It is really not necessary to detect error
+ * conditions with 1/10 seconds granularity
+ *
+ * On my AMD 133MHZ 486: 100 ms: 23% system load
+ * 1 sec: 5%
+ * 5 sec: 0.6%, yeah
+ */
+ if (timeout <= FT_SECOND) {
+ poll_delay = 100 * FT_MILLISECOND;
+ signal_retries = 20; /* two seconds */
+ } else if (timeout < 20 * FT_SECOND) {
+ TRACE(ft_t_flow, "setting poll delay to 1 second");
+ poll_delay = FT_SECOND;
+ signal_retries = 2; /* two seconds */
+ } else {
+ TRACE(ft_t_flow, "setting poll delay to 5 seconds");
+ poll_delay = 5 * FT_SECOND;
+ signal_retries = 1; /* five seconds */
+ }
+ for (;;) {
+ t0 = jiffies;
+ TRACE_CATCH(ftape_report_raw_drive_status(status),);
+ if (*status & QIC_STATUS_READY) {
+ TRACE_EXIT 0;
+ }
+ if (!signal_retries--) {
+ FT_SIGNAL_EXIT(_NEVER_BLOCK);
+ }
+ if ((int)timeout >= 0) {
+ /* this will fail when jiffies wraps around about
+ * once every year :-)
+ */
+ timeout -= ((jiffies - t0) * FT_SECOND) / HZ;
+ if (timeout <= 0) {
+ TRACE_ABORT(-ETIME, ft_t_err, "timeout");
+ }
+ ftape_sleep(poll_delay);
+ timeout -= poll_delay;
+ } else {
+ ftape_sleep(poll_delay);
+ }
+ }
+ TRACE_EXIT -ETIME;
+}
+
+/* Issue command and wait up to timeout milli seconds for drive ready
+ */
+int ftape_command_wait(qic117_cmd_t command, unsigned int timeout, int *status)
+{
+ int result;
+
+ /* Drive should be ready, issue command
+ */
+ result = ftape_command(command);
+ if (result >= 0) {
+ result = ftape_ready_wait(timeout, status);
+ }
+ return result;
+}
+
+static int ftape_parameter_wait(unsigned int parm, unsigned int timeout, int *status)
+{
+ int result;
+
+ /* Drive should be ready, issue command
+ */
+ result = ftape_parameter(parm);
+ if (result >= 0) {
+ result = ftape_ready_wait(timeout, status);
+ }
+ return result;
+}
+
+/*--------------------------------------------------------------------------
+ * Report operations
+ */
+
+/* Query the drive about its status. The command is sent and
+ result_length bits of status are returned (2 extra bits are read
+ for start and stop). */
+
+int ftape_report_operation(int *status,
+ qic117_cmd_t command,
+ int result_length)
+{
+ int i, st3;
+ unsigned int t0;
+ unsigned int dt;
+ TRACE_FUN(ft_t_any);
+
+ TRACE_CATCH(ftape_command(command),);
+ t0 = ftape_timestamp();
+ i = 0;
+ do {
+ ++i;
+ ftape_sleep(3 * FT_MILLISECOND); /* see remark below */
+ TRACE_CATCH(fdc_sense_drive_status(&st3),);
+ dt = ftape_timediff(t0, ftape_timestamp());
+ /* Ack should be asserted within Ttimout + Tack = 6 msec.
+ * Looks like some drives fail to do this so extend this
+ * period to 300 msec.
+ */
+ } while (!(st3 & ST3_TRACK_0) && dt < 300000);
+ if (!(st3 & ST3_TRACK_0)) {
+ TRACE(ft_t_err,
+ "No acknowledge after %u msec. (%i iter)", dt / 1000, i);
+ TRACE_ABORT(-EIO, ft_t_err, "timeout on Acknowledge");
+ }
+ /* dt may be larger than expected because of other tasks
+ * scheduled while we were sleeping.
+ */
+ if (i > 1 && dt > 6000) {
+ TRACE(ft_t_err, "Acknowledge after %u msec. (%i iter)",
+ dt / 1000, i);
+ }
+ *status = 0;
+ for (i = 0; i < result_length + 1; i++) {
+ TRACE_CATCH(ftape_command(QIC_REPORT_NEXT_BIT),);
+ TRACE_CATCH(fdc_sense_drive_status(&st3),);
+ if (i < result_length) {
+ *status |= ((st3 & ST3_TRACK_0) ? 1 : 0) << i;
+ } else if ((st3 & ST3_TRACK_0) == 0) {
+ TRACE_ABORT(-EIO, ft_t_err, "missing status stop bit");
+ }
+ }
+ /* this command will put track zero and index back into normal state */
+ (void)ftape_command(QIC_REPORT_NEXT_BIT);
+ TRACE_EXIT 0;
+}
+
+/* Report the current drive status. */
+
+int ftape_report_raw_drive_status(int *status)
+{
+ int result;
+ int count = 0;
+ TRACE_FUN(ft_t_any);
+
+ do {
+ result = ftape_report_operation(status,
+ QIC_REPORT_DRIVE_STATUS, 8);
+ } while (result < 0 && ++count <= 3);
+ if (result < 0) {
+ TRACE_ABORT(-EIO, ft_t_err,
+ "report_operation failed after %d trials", count);
+ }
+ if ((*status & 0xff) == 0xff) {
+ TRACE_ABORT(-EIO, ft_t_err,
+ "impossible drive status 0xff");
+ }
+ if (*status & QIC_STATUS_READY) {
+ ftape_current_command = QIC_NO_COMMAND; /* completed */
+ }
+ ft_last_status.status.drive_status = (__u8)(*status & 0xff);
+ TRACE_EXIT 0;
+}
+
+int ftape_report_drive_status(int *status)
+{
+ TRACE_FUN(ft_t_any);
+
+ TRACE_CATCH(ftape_report_raw_drive_status(status),);
+ if (*status & QIC_STATUS_NEW_CARTRIDGE ||
+ !(*status & QIC_STATUS_CARTRIDGE_PRESENT)) {
+ ft_failure = 1; /* will inhibit further operations */
+ TRACE_EXIT -EIO;
+ }
+ if (*status & QIC_STATUS_READY && *status & QIC_STATUS_ERROR) {
+ /* Let caller handle all errors */
+ TRACE_ABORT(1, ft_t_warn, "warning: error status set!");
+ }
+ TRACE_EXIT 0;
+}
+
+int ftape_report_error(unsigned int *error,
+ qic117_cmd_t *command, int report)
+{
+ static const ftape_error ftape_errors[] = QIC117_ERRORS;
+ int code;
+ TRACE_FUN(ft_t_any);
+
+ TRACE_CATCH(ftape_report_operation(&code, QIC_REPORT_ERROR_CODE, 16),);
+ *error = (unsigned int)(code & 0xff);
+ *command = (qic117_cmd_t)((code>>8)&0xff);
+ /* remember hardware status, maybe useful for status ioctls
+ */
+ ft_last_error.error.command = (__u8)*command;
+ ft_last_error.error.error = (__u8)*error;
+ if (!report) {
+ TRACE_EXIT 0;
+ }
+ if (*error == 0) {
+ TRACE_ABORT(0, ft_t_info, "No error");
+ }
+ TRACE(ft_t_info, "errorcode: %d", *error);
+ if (*error < NR_ITEMS(ftape_errors)) {
+ TRACE(ft_t_noise, "%sFatal ERROR:",
+ (ftape_errors[*error].fatal ? "" : "Non-"));
+ TRACE(ft_t_noise, "%s ...", ftape_errors[*error].message);
+ } else {
+ TRACE(ft_t_noise, "Unknown ERROR !");
+ }
+ if ((unsigned int)*command < NR_ITEMS(qic117_cmds) &&
+ qic117_cmds[*command].name != NULL) {
+ TRACE(ft_t_noise, "... caused by command \'%s\'",
+ qic117_cmds[*command].name);
+ } else {
+ TRACE(ft_t_noise, "... caused by unknown command %d",
+ *command);
+ }
+ TRACE_EXIT 0;
+}
+
+int ftape_report_configuration(qic_model *model,
+ unsigned int *rate,
+ int *qic_std,
+ int *tape_len)
+{
+ int result;
+ int config;
+ int status;
+ static const unsigned int qic_rates[ 4] = { 250, 2000, 500, 1000 };
+ TRACE_FUN(ft_t_any);
+
+ result = ftape_report_operation(&config,
+ QIC_REPORT_DRIVE_CONFIGURATION, 8);
+ if (result < 0) {
+ ft_last_status.status.drive_config = (__u8)0x00;
+ *model = prehistoric;
+ *rate = 500;
+ *qic_std = QIC_TAPE_QIC40;
+ *tape_len = 205;
+ TRACE_EXIT 0;
+ } else {
+ ft_last_status.status.drive_config = (__u8)(config & 0xff);
+ }
+ *rate = qic_rates[(config & QIC_CONFIG_RATE_MASK) >> QIC_CONFIG_RATE_SHIFT];
+ result = ftape_report_operation(&status, QIC_REPORT_TAPE_STATUS, 8);
+ if (result < 0) {
+ ft_last_status.status.tape_status = (__u8)0x00;
+ /* pre- QIC117 rev C spec. drive, QIC_CONFIG_80 bit is valid.
+ */
+ *qic_std = (config & QIC_CONFIG_80) ?
+ QIC_TAPE_QIC80 : QIC_TAPE_QIC40;
+ /* ?? how's about 425ft tapes? */
+ *tape_len = (config & QIC_CONFIG_LONG) ? 307 : 0;
+ *model = pre_qic117c;
+ result = 0;
+ } else {
+ ft_last_status.status.tape_status = (__u8)(status & 0xff);
+ *model = post_qic117b;
+ TRACE(ft_t_any, "report tape status result = %02x", status);
+ /* post- QIC117 rev C spec. drive, QIC_CONFIG_80 bit is
+ * invalid.
+ */
+ switch (status & QIC_TAPE_STD_MASK) {
+ case QIC_TAPE_QIC40:
+ case QIC_TAPE_QIC80:
+ case QIC_TAPE_QIC3020:
+ case QIC_TAPE_QIC3010:
+ *qic_std = status & QIC_TAPE_STD_MASK;
+ break;
+ default:
+ *qic_std = -1;
+ break;
+ }
+ switch (status & QIC_TAPE_LEN_MASK) {
+ case QIC_TAPE_205FT:
+ /* 205 or 425+ ft 550 Oe tape */
+ *tape_len = 0;
+ break;
+ case QIC_TAPE_307FT:
+ /* 307.5 ft 550 Oe Extended Length (XL) tape */
+ *tape_len = 307;
+ break;
+ case QIC_TAPE_VARIABLE:
+ /* Variable length 550 Oe tape */
+ *tape_len = 0;
+ break;
+ case QIC_TAPE_1100FT:
+ /* 1100 ft 550 Oe tape */
+ *tape_len = 1100;
+ break;
+ case QIC_TAPE_FLEX:
+ /* Variable length 900 Oe tape */
+ *tape_len = 0;
+ break;
+ default:
+ *tape_len = -1;
+ break;
+ }
+ if (*qic_std == -1 || *tape_len == -1) {
+ TRACE(ft_t_any,
+ "post qic-117b spec drive with unknown tape");
+ }
+ result = *tape_len == -1 ? -EIO : 0;
+ if (status & QIC_TAPE_WIDE) {
+ switch (*qic_std) {
+ case QIC_TAPE_QIC80:
+ TRACE(ft_t_info, "TR-1 tape detected");
+ break;
+ case QIC_TAPE_QIC3010:
+ TRACE(ft_t_info, "TR-2 tape detected");
+ break;
+ case QIC_TAPE_QIC3020:
+ TRACE(ft_t_info, "TR-3 tape detected");
+ break;
+ default:
+ TRACE(ft_t_warn,
+ "Unknown Travan tape type detected");
+ break;
+ }
+ }
+ }
+ TRACE_EXIT (result < 0) ? -EIO : 0;
+}
+
+static int ftape_report_rom_version(int *version)
+{
+
+ if (ftape_report_operation(version, QIC_REPORT_ROM_VERSION, 8) < 0) {
+ return -EIO;
+ } else {
+ return 0;
+ }
+}
+
+void ftape_report_vendor_id(unsigned int *id)
+{
+ int result;
+ TRACE_FUN(ft_t_any);
+
+ /* We'll try to get a vendor id from the drive. First
+ * according to the QIC-117 spec, a 16-bit id is requested.
+ * If that fails we'll try an 8-bit version, otherwise we'll
+ * try an undocumented query.
+ */
+ result = ftape_report_operation((int *) id, QIC_REPORT_VENDOR_ID, 16);
+ if (result < 0) {
+ result = ftape_report_operation((int *) id,
+ QIC_REPORT_VENDOR_ID, 8);
+ if (result < 0) {
+ /* The following is an undocumented call found
+ * in the CMS code.
+ */
+ result = ftape_report_operation((int *) id, 24, 8);
+ if (result < 0) {
+ *id = UNKNOWN_VENDOR;
+ } else {
+ TRACE(ft_t_noise, "got old 8 bit id: %04x",
+ *id);
+ *id |= 0x20000;
+ }
+ } else {
+ TRACE(ft_t_noise, "got 8 bit id: %04x", *id);
+ *id |= 0x10000;
+ }
+ } else {
+ TRACE(ft_t_noise, "got 16 bit id: %04x", *id);
+ }
+ if (*id == 0x0047) {
+ int version;
+ int sign;
+
+ if (ftape_report_rom_version(&version) < 0) {
+ TRACE(ft_t_bug, "report rom version failed");
+ TRACE_EXIT;
+ }
+ TRACE(ft_t_noise, "CMS rom version: %d", version);
+ ftape_command(QIC_ENTER_DIAGNOSTIC_1);
+ ftape_command(QIC_ENTER_DIAGNOSTIC_1);
+ diagnostic_mode = 1;
+ if (ftape_report_operation(&sign, 9, 8) < 0) {
+ unsigned int error;
+ qic117_cmd_t command;
+
+ ftape_report_error(&error, &command, 1);
+ ftape_command(QIC_ENTER_PRIMARY_MODE);
+ diagnostic_mode = 0;
+ TRACE_EXIT; /* failure ! */
+ } else {
+ TRACE(ft_t_noise, "CMS signature: %02x", sign);
+ }
+ if (sign == 0xa5) {
+ result = ftape_report_operation(&sign, 37, 8);
+ if (result < 0) {
+ if (version >= 63) {
+ *id = 0x8880;
+ TRACE(ft_t_noise,
+ "This is an Iomega drive !");
+ } else {
+ *id = 0x0047;
+ TRACE(ft_t_noise,
+ "This is a real CMS drive !");
+ }
+ } else {
+ *id = 0x0047;
+ TRACE(ft_t_noise, "CMS status: %d", sign);
+ }
+ } else {
+ *id = UNKNOWN_VENDOR;
+ }
+ ftape_command(QIC_ENTER_PRIMARY_MODE);
+ diagnostic_mode = 0;
+ }
+ TRACE_EXIT;
+}
+
+static int qic_rate_code(unsigned int rate)
+{
+ switch (rate) {
+ case 250:
+ return QIC_CONFIG_RATE_250;
+ case 500:
+ return QIC_CONFIG_RATE_500;
+ case 1000:
+ return QIC_CONFIG_RATE_1000;
+ case 2000:
+ return QIC_CONFIG_RATE_2000;
+ default:
+ return QIC_CONFIG_RATE_500;
+ }
+}
+
+static int ftape_set_rate_test(unsigned int *max_rate)
+{
+ unsigned int error;
+ qic117_cmd_t command;
+ int status;
+ int supported = 0;
+ TRACE_FUN(ft_t_any);
+
+ /* Check if the drive does support the select rate command
+ * by testing all different settings. If any one is accepted
+ * we assume the command is supported, else not.
+ */
+ for (*max_rate = 2000; *max_rate >= 250; *max_rate /= 2) {
+ if (ftape_command(QIC_SELECT_RATE) < 0) {
+ continue;
+ }
+ if (ftape_parameter_wait(qic_rate_code(*max_rate),
+ 1 * FT_SECOND, &status) < 0) {
+ continue;
+ }
+ if (status & QIC_STATUS_ERROR) {
+ ftape_report_error(&error, &command, 0);
+ continue;
+ }
+ supported = 1; /* did accept a request */
+ break;
+ }
+ TRACE(ft_t_noise, "Select Rate command is%s supported",
+ supported ? "" : " not");
+ TRACE_EXIT supported;
+}
+
+int ftape_set_data_rate(unsigned int new_rate /* Kbps */, unsigned int qic_std)
+{
+ int status;
+ int result = 0;
+ unsigned int data_rate = new_rate;
+ static int supported;
+ int rate_changed = 0;
+ qic_model dummy_model;
+ unsigned int dummy_qic_std, dummy_tape_len;
+ TRACE_FUN(ft_t_any);
+
+ if (ft_drive_max_rate == 0) { /* first time */
+ supported = ftape_set_rate_test(&ft_drive_max_rate);
+ }
+ if (supported) {
+ ftape_command(QIC_SELECT_RATE);
+ result = ftape_parameter_wait(qic_rate_code(new_rate),
+ 1 * FT_SECOND, &status);
+ if (result >= 0 && !(status & QIC_STATUS_ERROR)) {
+ rate_changed = 1;
+ }
+ }
+ TRACE_CATCH(result = ftape_report_configuration(&dummy_model,
+ &data_rate,
+ &dummy_qic_std,
+ &dummy_tape_len),);
+ if (data_rate != new_rate) {
+ if (!supported) {
+ TRACE(ft_t_warn, "Rate change not supported!");
+ } else if (rate_changed) {
+ TRACE(ft_t_warn, "Requested: %d, got %d",
+ new_rate, data_rate);
+ } else {
+ TRACE(ft_t_warn, "Rate change failed!");
+ }
+ result = -EINVAL;
+ }
+ /*
+ * Set data rate and write precompensation as specified:
+ *
+ * | QIC-40/80 | QIC-3010/3020
+ * rate | precomp | precomp
+ * ----------+-------------+--------------
+ * 250 Kbps. | 250 ns. | 0 ns.
+ * 500 Kbps. | 125 ns. | 0 ns.
+ * 1 Mbps. | 42 ns. | 0 ns.
+ * 2 Mbps | N/A | 0 ns.
+ */
+ if ((qic_std == QIC_TAPE_QIC40 && data_rate > 500) ||
+ (qic_std == QIC_TAPE_QIC80 && data_rate > 1000)) {
+ TRACE_ABORT(-EINVAL,
+ ft_t_warn, "Datarate too high for QIC-mode");
+ }
+ TRACE_CATCH(fdc_set_data_rate(data_rate),_res = -EINVAL);
+ ft_data_rate = data_rate;
+ if (qic_std == QIC_TAPE_QIC40 || qic_std == QIC_TAPE_QIC80) {
+ switch (data_rate) {
+ case 250:
+ fdc_set_write_precomp(250);
+ break;
+ default:
+ case 500:
+ fdc_set_write_precomp(125);
+ break;
+ case 1000:
+ fdc_set_write_precomp(42);
+ break;
+ }
+ } else {
+ fdc_set_write_precomp(0);
+ }
+ TRACE_EXIT result;
+}
+
+/* The next two functions are used to cope with excessive overrun errors
+ */
+int ftape_increase_threshold(void)
+{
+ TRACE_FUN(ft_t_flow);
+
+ if (fdc.type < i82077 || ft_fdc_threshold >= 12) {
+ TRACE_ABORT(-EIO, ft_t_err, "cannot increase fifo threshold");
+ }
+ if (fdc_fifo_threshold(++ft_fdc_threshold, NULL, NULL, NULL) < 0) {
+ TRACE(ft_t_err, "cannot increase fifo threshold");
+ ft_fdc_threshold --;
+ fdc_reset();
+ }
+ TRACE(ft_t_info, "New FIFO threshold: %d", ft_fdc_threshold);
+ TRACE_EXIT 0;
+}
+
+int ftape_half_data_rate(void)
+{
+ if (ft_data_rate < 500) {
+ return -1;
+ }
+ if (ftape_set_data_rate(ft_data_rate / 2, ft_qic_std) < 0) {
+ return -EIO;
+ }
+ ftape_calc_timeouts(ft_qic_std, ft_data_rate, ftape_tape_len);
+ return 0;
+}
+
+/* Seek the head to the specified track.
+ */
+int ftape_seek_head_to_track(unsigned int track)
+{
+ int status;
+ TRACE_FUN(ft_t_any);
+
+ ft_location.track = -1; /* remains set in case of error */
+ if (track >= ft_tracks_per_tape) {
+ TRACE_ABORT(-EINVAL, ft_t_bug, "track out of bounds");
+ }
+ TRACE(ft_t_flow, "seeking track %d", track);
+ TRACE_CATCH(ftape_command(QIC_SEEK_HEAD_TO_TRACK),);
+ TRACE_CATCH(ftape_parameter_wait(track, ftape_timeout.head_seek,
+ &status),);
+ ft_location.track = track;
+ ftape_might_be_off_track = 0;
+ TRACE_EXIT 0;
+}
+
+int ftape_wakeup_drive(wake_up_types method)
+{
+ int status;
+ int motor_on = 0;
+ TRACE_FUN(ft_t_any);
+
+ switch (method) {
+ case wake_up_colorado:
+ TRACE_CATCH(ftape_command(QIC_PHANTOM_SELECT),);
+ TRACE_CATCH(ftape_parameter(0 /* ft_drive_sel ?? */),);
+ break;
+ case wake_up_mountain:
+ TRACE_CATCH(ftape_command(QIC_SOFT_SELECT),);
+ ftape_sleep(FT_MILLISECOND); /* NEEDED */
+ TRACE_CATCH(ftape_parameter(18),);
+ break;
+ case wake_up_insight:
+ ftape_sleep(100 * FT_MILLISECOND);
+ motor_on = 1;
+ fdc_motor(motor_on); /* enable is done by motor-on */
+ case no_wake_up:
+ break;
+ default:
+ TRACE_EXIT -ENODEV; /* unknown wakeup method */
+ break;
+ }
+ /* If wakeup succeeded we shouldn't get an error here..
+ */
+ TRACE_CATCH(ftape_report_raw_drive_status(&status),
+ if (motor_on) {
+ fdc_motor(0);
+ });
+ TRACE_EXIT 0;
+}
+
+int ftape_put_drive_to_sleep(wake_up_types method)
+{
+ TRACE_FUN(ft_t_any);
+
+ switch (method) {
+ case wake_up_colorado:
+ TRACE_CATCH(ftape_command(QIC_PHANTOM_DESELECT),);
+ break;
+ case wake_up_mountain:
+ TRACE_CATCH(ftape_command(QIC_SOFT_DESELECT),);
+ break;
+ case wake_up_insight:
+ fdc_motor(0); /* enable is done by motor-on */
+ case no_wake_up: /* no wakeup / no sleep ! */
+ break;
+ default:
+ TRACE_EXIT -ENODEV; /* unknown wakeup method */
+ }
+ TRACE_EXIT 0;
+}
+
+int ftape_reset_drive(void)
+{
+ int result = 0;
+ int status;
+ unsigned int err_code;
+ qic117_cmd_t err_command;
+ int i;
+ TRACE_FUN(ft_t_any);
+
+ /* We want to re-establish contact with our drive. Fire a
+ * number of reset commands (single step pulses) and pray for
+ * success.
+ */
+ for (i = 0; i < 2; ++i) {
+ TRACE(ft_t_flow, "Resetting fdc");
+ fdc_reset();
+ ftape_sleep(10 * FT_MILLISECOND);
+ TRACE(ft_t_flow, "Reset command to drive");
+ result = ftape_command(QIC_RESET);
+ if (result == 0) {
+ ftape_sleep(1 * FT_SECOND); /* drive not
+ * accessible
+ * during 1 second
+ */
+ TRACE(ft_t_flow, "Re-selecting drive");
+
+ /* Strange, the QIC-117 specs don't mention
+ * this but the drive gets deselected after a
+ * soft reset ! So we need to enable it
+ * again.
+ */
+ if (ftape_wakeup_drive(ft_drive_type.wake_up) < 0) {
+ TRACE(ft_t_err, "Wakeup failed !");
+ }
+ TRACE(ft_t_flow, "Waiting until drive gets ready");
+ result= ftape_ready_wait(ftape_timeout.reset, &status);
+ if (result == 0 && (status & QIC_STATUS_ERROR)) {
+ result = ftape_report_error(&err_code,
+ &err_command, 1);
+ if (result == 0 && err_code == 27) {
+ /* Okay, drive saw reset
+ * command and responded as it
+ * should
+ */
+ break;
+ } else {
+ result = -EIO;
+ }
+ } else {
+ result = -EIO;
+ }
+ }
+ FT_SIGNAL_EXIT(_DONT_BLOCK);
+ }
+ if (result != 0) {
+ TRACE(ft_t_err, "General failure to reset tape drive");
+ } else {
+ /* Restore correct settings: keep original rate
+ */
+ ftape_set_data_rate(ft_data_rate, ft_qic_std);
+ }
+ ftape_init_drive_needed = 1;
+ TRACE_EXIT result;
+}