summaryrefslogtreecommitdiff
path: root/drivers/char/ip2/i2cmd.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/char/ip2/i2cmd.h')
-rw-r--r--drivers/char/ip2/i2cmd.h643
1 files changed, 643 insertions, 0 deletions
diff --git a/drivers/char/ip2/i2cmd.h b/drivers/char/ip2/i2cmd.h
new file mode 100644
index 000000000000..c41728a85710
--- /dev/null
+++ b/drivers/char/ip2/i2cmd.h
@@ -0,0 +1,643 @@
+/*******************************************************************************
+*
+* (c) 1999 by Computone Corporation
+*
+********************************************************************************
+*
+*
+* PACKAGE: Linux tty Device Driver for IntelliPort II family of multiport
+* serial I/O controllers.
+*
+* DESCRIPTION: Definitions and support for In-line and Bypass commands.
+* Applicable only when the standard loadware is active.
+*
+*******************************************************************************/
+//------------------------------------------------------------------------------
+// Revision History:
+//
+// 10 October 1991 MAG First Draft
+// 7 November 1991 MAG Reflects some new commands
+// 20 February 1992 MAG CMD_HOTACK corrected: no argument.
+// 24 February 1992 MAG Support added for new commands for 1.4.x loadware.
+// 11 March 1992 MAG Additional commands.
+// 16 March 1992 MAG Additional commands.
+// 30 March 1992 MAG Additional command: CMD_DSS_NOW
+// 18 May 1992 MAG Changed CMD_OPOST
+//
+//------------------------------------------------------------------------------
+#ifndef I2CMD_H // To prevent multiple includes
+#define I2CMD_H 1
+
+#include "ip2types.h"
+
+// This module is designed to provide a uniform method of sending commands to
+// the board through command packets. The difficulty is, some commands take
+// parameters, others do not. Furthermore, it is often useful to send several
+// commands to the same channel as part of the same packet. (See also i2pack.h.)
+//
+// This module is designed so that the caller should not be responsible for
+// remembering the exact syntax of each command, or at least so that the
+// compiler could check things somewhat. I'll explain as we go...
+//
+// First, a structure which can embody the syntax of each type of command.
+//
+typedef struct _cmdSyntax
+{
+ UCHAR length; // Number of bytes in the command
+ UCHAR flags; // Information about the command (see below)
+
+ // The command and its parameters, which may be of arbitrary length. Don't
+ // worry yet how the parameters will be initialized; macros later take care
+ // of it. Also, don't worry about the arbitrary length issue; this structure
+ // is never used to allocate space (see i2cmd.c).
+ UCHAR cmd[2];
+} cmdSyntax, *cmdSyntaxPtr;
+
+// Bit assignments for flags
+
+#define INL 1 // Set if suitable for inline commands
+#define BYP 2 // Set if suitable for bypass commands
+#define BTH (INL|BYP) // suitable for either!
+#define END 4 // Set if this must be the last command in a block
+#define VIP 8 // Set if this command is special in some way and really
+ // should only be sent from the library-level and not
+ // directly from user-level
+#define VAR 0x10 // This command is of variable length!
+
+//-----------------------------------
+// External declarations for i2cmd.c
+//-----------------------------------
+// Routine to set up parameters for the "define hot-key sequence" command. Since
+// there is more than one parameter to assign, we must use a function rather
+// than a macro (used usually).
+//
+extern cmdSyntaxPtr i2cmdUnixFlags(USHORT iflag,USHORT cflag,USHORT lflag);
+extern cmdSyntaxPtr i2cmdBaudDef(int which, USHORT rate);
+
+// Declarations for the global arrays used to bear the commands and their
+// arguments.
+//
+// Note: Since these are globals and the arguments might change, it is important
+// that the library routine COPY these into buffers from whence they would be
+// sent, rather than merely storing the pointers. In multi-threaded
+// environments, important that the copy should obtain before any context switch
+// is allowed. Also, for parameterized commands, DO NOT ISSUE THE SAME COMMAND
+// MORE THAN ONCE WITH THE SAME PARAMETERS in the same call.
+//
+static UCHAR ct02[];
+static UCHAR ct03[];
+static UCHAR ct04[];
+static UCHAR ct05[];
+static UCHAR ct06[];
+static UCHAR ct07[];
+static UCHAR ct08[];
+static UCHAR ct09[];
+static UCHAR ct10[];
+static UCHAR ct11[];
+static UCHAR ct12[];
+static UCHAR ct13[];
+static UCHAR ct14[];
+static UCHAR ct15[];
+static UCHAR ct16[];
+static UCHAR ct17[];
+static UCHAR ct18[];
+static UCHAR ct19[];
+static UCHAR ct20[];
+static UCHAR ct21[];
+static UCHAR ct22[];
+static UCHAR ct23[];
+static UCHAR ct24[];
+static UCHAR ct25[];
+static UCHAR ct26[];
+static UCHAR ct27[];
+static UCHAR ct28[];
+static UCHAR ct29[];
+static UCHAR ct30[];
+static UCHAR ct31[];
+static UCHAR ct32[];
+static UCHAR ct33[];
+static UCHAR ct34[];
+static UCHAR ct35[];
+static UCHAR ct36[];
+static UCHAR ct36a[];
+static UCHAR ct41[];
+static UCHAR ct42[];
+static UCHAR ct43[];
+static UCHAR ct44[];
+static UCHAR ct45[];
+static UCHAR ct46[];
+static UCHAR ct48[];
+static UCHAR ct49[];
+static UCHAR ct50[];
+static UCHAR ct51[];
+static UCHAR ct52[];
+static UCHAR ct56[];
+static UCHAR ct57[];
+static UCHAR ct58[];
+static UCHAR ct59[];
+static UCHAR ct60[];
+static UCHAR ct61[];
+static UCHAR ct62[];
+static UCHAR ct63[];
+static UCHAR ct64[];
+static UCHAR ct65[];
+static UCHAR ct66[];
+static UCHAR ct67[];
+static UCHAR ct68[];
+static UCHAR ct69[];
+static UCHAR ct70[];
+static UCHAR ct71[];
+static UCHAR ct72[];
+static UCHAR ct73[];
+static UCHAR ct74[];
+static UCHAR ct75[];
+static UCHAR ct76[];
+static UCHAR ct77[];
+static UCHAR ct78[];
+static UCHAR ct79[];
+static UCHAR ct80[];
+static UCHAR ct81[];
+static UCHAR ct82[];
+static UCHAR ct83[];
+static UCHAR ct84[];
+static UCHAR ct85[];
+static UCHAR ct86[];
+static UCHAR ct87[];
+static UCHAR ct88[];
+static UCHAR ct89[];
+static UCHAR ct90[];
+static UCHAR ct91[];
+static UCHAR cc01[];
+static UCHAR cc02[];
+
+// Now, refer to i2cmd.c, and see the character arrays defined there. They are
+// cast here to cmdSyntaxPtr.
+//
+// There are library functions for issuing bypass or inline commands. These
+// functions take one or more arguments of the type cmdSyntaxPtr. The routine
+// then can figure out how long each command is supposed to be and easily add it
+// to the list.
+//
+// For ease of use, we define manifests which return pointers to appropriate
+// cmdSyntaxPtr things. But some commands also take arguments. If a single
+// argument is used, we define a macro which performs the single assignment and
+// (through the expedient of a comma expression) references the appropriate
+// pointer. For commands requiring several arguments, we actually define a
+// function to perform the assignments.
+
+#define CMD_DTRUP (cmdSyntaxPtr)(ct02) // Raise DTR
+#define CMD_DTRDN (cmdSyntaxPtr)(ct03) // Lower DTR
+#define CMD_RTSUP (cmdSyntaxPtr)(ct04) // Raise RTS
+#define CMD_RTSDN (cmdSyntaxPtr)(ct05) // Lower RTS
+#define CMD_STARTFL (cmdSyntaxPtr)(ct06) // Start Flushing Data
+
+#define CMD_DTRRTS_UP (cmdSyntaxPtr)(cc01) // Raise DTR and RTS
+#define CMD_DTRRTS_DN (cmdSyntaxPtr)(cc02) // Lower DTR and RTS
+
+// Set Baud Rate for transmit and receive
+#define CMD_SETBAUD(arg) \
+ (((cmdSyntaxPtr)(ct07))->cmd[1] = (arg),(cmdSyntaxPtr)(ct07))
+
+#define CBR_50 1
+#define CBR_75 2
+#define CBR_110 3
+#define CBR_134 4
+#define CBR_150 5
+#define CBR_200 6
+#define CBR_300 7
+#define CBR_600 8
+#define CBR_1200 9
+#define CBR_1800 10
+#define CBR_2400 11
+#define CBR_4800 12
+#define CBR_9600 13
+#define CBR_19200 14
+#define CBR_38400 15
+#define CBR_2000 16
+#define CBR_3600 17
+#define CBR_7200 18
+#define CBR_56000 19
+#define CBR_57600 20
+#define CBR_64000 21
+#define CBR_76800 22
+#define CBR_115200 23
+#define CBR_C1 24 // Custom baud rate 1
+#define CBR_C2 25 // Custom baud rate 2
+#define CBR_153600 26
+#define CBR_230400 27
+#define CBR_307200 28
+#define CBR_460800 29
+#define CBR_921600 30
+
+// Set Character size
+//
+#define CMD_SETBITS(arg) \
+ (((cmdSyntaxPtr)(ct08))->cmd[1] = (arg),(cmdSyntaxPtr)(ct08))
+
+#define CSZ_5 0
+#define CSZ_6 1
+#define CSZ_7 2
+#define CSZ_8 3
+
+// Set number of stop bits
+//
+#define CMD_SETSTOP(arg) \
+ (((cmdSyntaxPtr)(ct09))->cmd[1] = (arg),(cmdSyntaxPtr)(ct09))
+
+#define CST_1 0
+#define CST_15 1 // 1.5 stop bits
+#define CST_2 2
+
+// Set parity option
+//
+#define CMD_SETPAR(arg) \
+ (((cmdSyntaxPtr)(ct10))->cmd[1] = (arg),(cmdSyntaxPtr)(ct10))
+
+#define CSP_NP 0 // no parity
+#define CSP_OD 1 // odd parity
+#define CSP_EV 2 // Even parity
+#define CSP_SP 3 // Space parity
+#define CSP_MK 4 // Mark parity
+
+// Define xon char for transmitter flow control
+//
+#define CMD_DEF_IXON(arg) \
+ (((cmdSyntaxPtr)(ct11))->cmd[1] = (arg),(cmdSyntaxPtr)(ct11))
+
+// Define xoff char for transmitter flow control
+//
+#define CMD_DEF_IXOFF(arg) \
+ (((cmdSyntaxPtr)(ct12))->cmd[1] = (arg),(cmdSyntaxPtr)(ct12))
+
+#define CMD_STOPFL (cmdSyntaxPtr)(ct13) // Stop Flushing data
+
+// Acknowledge receipt of hotkey signal
+//
+#define CMD_HOTACK (cmdSyntaxPtr)(ct14)
+
+// Define irq level to use. Should actually be sent by library-level code, not
+// directly from user...
+//
+#define CMDVALUE_IRQ 15 // For library use at initialization. Until this command
+ // is sent, board processing doesn't really start.
+#define CMD_SET_IRQ(arg) \
+ (((cmdSyntaxPtr)(ct15))->cmd[1] = (arg),(cmdSyntaxPtr)(ct15))
+
+#define CIR_POLL 0 // No IRQ - Poll
+#define CIR_3 3 // IRQ 3
+#define CIR_4 4 // IRQ 4
+#define CIR_5 5 // IRQ 5
+#define CIR_7 7 // IRQ 7
+#define CIR_10 10 // IRQ 10
+#define CIR_11 11 // IRQ 11
+#define CIR_12 12 // IRQ 12
+#define CIR_15 15 // IRQ 15
+
+// Select transmit flow xon/xoff options
+//
+#define CMD_IXON_OPT(arg) \
+ (((cmdSyntaxPtr)(ct16))->cmd[1] = (arg),(cmdSyntaxPtr)(ct16))
+
+#define CIX_NONE 0 // Incoming Xon/Xoff characters not special
+#define CIX_XON 1 // Xoff disable, Xon enable
+#define CIX_XANY 2 // Xoff disable, any key enable
+
+// Select receive flow xon/xoff options
+//
+#define CMD_OXON_OPT(arg) \
+ (((cmdSyntaxPtr)(ct17))->cmd[1] = (arg),(cmdSyntaxPtr)(ct17))
+
+#define COX_NONE 0 // Don't send Xon/Xoff
+#define COX_XON 1 // Send xon/xoff to start/stop incoming data
+
+
+#define CMD_CTS_REP (cmdSyntaxPtr)(ct18) // Enable CTS reporting
+#define CMD_CTS_NREP (cmdSyntaxPtr)(ct19) // Disable CTS reporting
+
+#define CMD_DCD_REP (cmdSyntaxPtr)(ct20) // Enable DCD reporting
+#define CMD_DCD_NREP (cmdSyntaxPtr)(ct21) // Disable DCD reporting
+
+#define CMD_DSR_REP (cmdSyntaxPtr)(ct22) // Enable DSR reporting
+#define CMD_DSR_NREP (cmdSyntaxPtr)(ct23) // Disable DSR reporting
+
+#define CMD_RI_REP (cmdSyntaxPtr)(ct24) // Enable RI reporting
+#define CMD_RI_NREP (cmdSyntaxPtr)(ct25) // Disable RI reporting
+
+// Enable break reporting and select style
+//
+#define CMD_BRK_REP(arg) \
+ (((cmdSyntaxPtr)(ct26))->cmd[1] = (arg),(cmdSyntaxPtr)(ct26))
+
+#define CBK_STAT 0x00 // Report breaks as a status (exception,irq)
+#define CBK_NULL 0x01 // Report breaks as a good null
+#define CBK_STAT_SEQ 0x02 // Report breaks as a status AND as in-band character
+ // sequence FFh, 01h, 10h
+#define CBK_SEQ 0x03 // Report breaks as the in-band
+ //sequence FFh, 01h, 10h ONLY.
+#define CBK_FLSH 0x04 // if this bit set also flush input data
+#define CBK_POSIX 0x08 // if this bit set report as FF,0,0 sequence
+#define CBK_SINGLE 0x10 // if this bit set with CBK_SEQ or CBK_STAT_SEQ
+ //then reports single null instead of triple
+
+#define CMD_BRK_NREP (cmdSyntaxPtr)(ct27) // Disable break reporting
+
+// Specify maximum block size for received data
+//
+#define CMD_MAX_BLOCK(arg) \
+ (((cmdSyntaxPtr)(ct28))->cmd[1] = (arg),(cmdSyntaxPtr)(ct28))
+
+// -- COMMAND 29 is reserved --
+
+#define CMD_CTSFL_ENAB (cmdSyntaxPtr)(ct30) // Enable CTS flow control
+#define CMD_CTSFL_DSAB (cmdSyntaxPtr)(ct31) // Disable CTS flow control
+#define CMD_RTSFL_ENAB (cmdSyntaxPtr)(ct32) // Enable RTS flow control
+#define CMD_RTSFL_DSAB (cmdSyntaxPtr)(ct33) // Disable RTS flow control
+
+// Specify istrip option
+//
+#define CMD_ISTRIP_OPT(arg) \
+ (((cmdSyntaxPtr)(ct34))->cmd[1] = (arg),(cmdSyntaxPtr)(ct34))
+
+#define CIS_NOSTRIP 0 // Strip characters to character size
+#define CIS_STRIP 1 // Strip any 8-bit characters to 7 bits
+
+// Send a break of arg milliseconds
+//
+#define CMD_SEND_BRK(arg) \
+ (((cmdSyntaxPtr)(ct35))->cmd[1] = (arg),(cmdSyntaxPtr)(ct35))
+
+// Set error reporting mode
+//
+#define CMD_SET_ERROR(arg) \
+ (((cmdSyntaxPtr)(ct36))->cmd[1] = (arg),(cmdSyntaxPtr)(ct36))
+
+#define CSE_ESTAT 0 // Report error in a status packet
+#define CSE_NOREP 1 // Treat character as though it were good
+#define CSE_DROP 2 // Discard the character
+#define CSE_NULL 3 // Replace with a null
+#define CSE_MARK 4 // Replace with a 3-character sequence (as Unix)
+
+#define CMD_SET_REPLACEMENT(arg,ch) \
+ (((cmdSyntaxPtr)(ct36a))->cmd[1] = (arg), \
+ (((cmdSyntaxPtr)(ct36a))->cmd[2] = (ch), \
+ (cmdSyntaxPtr)(ct36a))
+
+#define CSE_REPLACE 0x8 // Replace the errored character with the
+ // replacement character defined here
+
+#define CSE_STAT_REPLACE 0x18 // Replace the errored character with the
+ // replacement character defined here AND
+ // report the error as a status packet (as in
+ // CSE_ESTAT).
+
+
+// COMMAND 37, to send flow control packets, is handled only by low-level
+// library code in response to data movement and shouldn't ever be sent by the
+// user code. See i2pack.h and the body of i2lib.c for details.
+
+// Enable on-board post-processing, using options given in oflag argument.
+// Formerly, this command was automatically preceded by a CMD_OPOST_OFF command
+// because the loadware does not permit sending back-to-back CMD_OPOST_ON
+// commands without an intervening CMD_OPOST_OFF. BUT, WE LEARN 18 MAY 92, that
+// CMD_OPOST_ON and CMD_OPOST_OFF must each be at the end of a packet (or in a
+// solo packet). This means the caller must specify separately CMD_OPOST_OFF,
+// CMD_OPOST_ON(parm) when he calls i2QueueCommands(). That function will ensure
+// each gets a separate packet. Extra CMD_OPOST_OFF's are always ok.
+//
+#define CMD_OPOST_ON(oflag) \
+ (*(USHORT *)(((cmdSyntaxPtr)(ct39))->cmd[1]) = (oflag), \
+ (cmdSyntaxPtr)(ct39))
+
+#define CMD_OPOST_OFF (cmdSyntaxPtr)(ct40) // Disable on-board post-proc
+
+#define CMD_RESUME (cmdSyntaxPtr)(ct41) // Resume: behave as though an XON
+ // were received;
+
+// Set Transmit baud rate (see command 7 for arguments)
+//
+#define CMD_SETBAUD_TX(arg) \
+ (((cmdSyntaxPtr)(ct42))->cmd[1] = (arg),(cmdSyntaxPtr)(ct42))
+
+// Set Receive baud rate (see command 7 for arguments)
+//
+#define CMD_SETBAUD_RX(arg) \
+ (((cmdSyntaxPtr)(ct43))->cmd[1] = (arg),(cmdSyntaxPtr)(ct43))
+
+// Request interrupt from board each arg milliseconds. Interrupt will specify
+// "received data", even though there may be no data present. If arg == 0,
+// disables any such interrupts.
+//
+#define CMD_PING_REQ(arg) \
+ (((cmdSyntaxPtr)(ct44))->cmd[1] = (arg),(cmdSyntaxPtr)(ct44))
+
+#define CMD_HOT_ENAB (cmdSyntaxPtr)(ct45) // Enable Hot-key checking
+#define CMD_HOT_DSAB (cmdSyntaxPtr)(ct46) // Disable Hot-key checking
+
+// COMMAND 47: Send Protocol info via Unix flags:
+// iflag = Unix tty t_iflag
+// cflag = Unix tty t_cflag
+// lflag = Unix tty t_lflag
+// See System V Unix/Xenix documentation for the meanings of the bit fields
+// within these flags
+//
+#define CMD_UNIX_FLAGS(iflag,cflag,lflag) i2cmdUnixFlags(iflag,cflag,lflag)
+
+#define CMD_DSRFL_ENAB (cmdSyntaxPtr)(ct48) // Enable DSR receiver ctrl
+#define CMD_DSRFL_DSAB (cmdSyntaxPtr)(ct49) // Disable DSR receiver ctrl
+#define CMD_DTRFL_ENAB (cmdSyntaxPtr)(ct50) // Enable DTR flow control
+#define CMD_DTRFL_DSAB (cmdSyntaxPtr)(ct51) // Disable DTR flow control
+#define CMD_BAUD_RESET (cmdSyntaxPtr)(ct52) // Reset baudrate table
+
+// COMMAND 54: Define custom rate #1
+// rate = (short) 1/10 of the desired baud rate
+//
+#define CMD_BAUD_DEF1(rate) i2cmdBaudDef(1,rate)
+
+// COMMAND 55: Define custom rate #2
+// rate = (short) 1/10 of the desired baud rate
+//
+#define CMD_BAUD_DEF2(rate) i2cmdBaudDef(2,rate)
+
+// Pause arg hundredths of seconds. (Note, this is NOT milliseconds.)
+//
+#define CMD_PAUSE(arg) \
+ (((cmdSyntaxPtr)(ct56))->cmd[1] = (arg),(cmdSyntaxPtr)(ct56))
+
+#define CMD_SUSPEND (cmdSyntaxPtr)(ct57) // Suspend output
+#define CMD_UNSUSPEND (cmdSyntaxPtr)(ct58) // Un-Suspend output
+
+// Set parity-checking options
+//
+#define CMD_PARCHK(arg) \
+ (((cmdSyntaxPtr)(ct59))->cmd[1] = (arg),(cmdSyntaxPtr)(ct59))
+
+#define CPK_ENAB 0 // Enable parity checking on input
+#define CPK_DSAB 1 // Disable parity checking on input
+
+#define CMD_BMARK_REQ (cmdSyntaxPtr)(ct60) // Bookmark request
+
+
+// Enable/Disable internal loopback mode
+//
+#define CMD_INLOOP(arg) \
+ (((cmdSyntaxPtr)(ct61))->cmd[1] = (arg),(cmdSyntaxPtr)(ct61))
+
+#define CIN_DISABLE 0 // Normal operation (default)
+#define CIN_ENABLE 1 // Internal (local) loopback
+#define CIN_REMOTE 2 // Remote loopback
+
+// Specify timeout for hotkeys: Delay will be (arg x 10) milliseconds, arg == 0
+// --> no timeout: wait forever.
+//
+#define CMD_HOT_TIME(arg) \
+ (((cmdSyntaxPtr)(ct62))->cmd[1] = (arg),(cmdSyntaxPtr)(ct62))
+
+
+// Define (outgoing) xon for receive flow control
+//
+#define CMD_DEF_OXON(arg) \
+ (((cmdSyntaxPtr)(ct63))->cmd[1] = (arg),(cmdSyntaxPtr)(ct63))
+
+// Define (outgoing) xoff for receiver flow control
+//
+#define CMD_DEF_OXOFF(arg) \
+ (((cmdSyntaxPtr)(ct64))->cmd[1] = (arg),(cmdSyntaxPtr)(ct64))
+
+// Enable/Disable RTS on transmit (1/2 duplex-style)
+//
+#define CMD_RTS_XMIT(arg) \
+ (((cmdSyntaxPtr)(ct65))->cmd[1] = (arg),(cmdSyntaxPtr)(ct65))
+
+#define CHD_DISABLE 0
+#define CHD_ENABLE 1
+
+// Set high-water-mark level (debugging use only)
+//
+#define CMD_SETHIGHWAT(arg) \
+ (((cmdSyntaxPtr)(ct66))->cmd[1] = (arg),(cmdSyntaxPtr)(ct66))
+
+// Start flushing tagged data (tag = 0-14)
+//
+#define CMD_START_SELFL(tag) \
+ (((cmdSyntaxPtr)(ct67))->cmd[1] = (tag),(cmdSyntaxPtr)(ct67))
+
+// End flushing tagged data (tag = 0-14)
+//
+#define CMD_END_SELFL(tag) \
+ (((cmdSyntaxPtr)(ct68))->cmd[1] = (tag),(cmdSyntaxPtr)(ct68))
+
+#define CMD_HWFLOW_OFF (cmdSyntaxPtr)(ct69) // Disable HW TX flow control
+#define CMD_ODSRFL_ENAB (cmdSyntaxPtr)(ct70) // Enable DSR output f/c
+#define CMD_ODSRFL_DSAB (cmdSyntaxPtr)(ct71) // Disable DSR output f/c
+#define CMD_ODCDFL_ENAB (cmdSyntaxPtr)(ct72) // Enable DCD output f/c
+#define CMD_ODCDFL_DSAB (cmdSyntaxPtr)(ct73) // Disable DCD output f/c
+
+// Set transmit interrupt load level. Count should be an even value 2-12
+//
+#define CMD_LOADLEVEL(count) \
+ (((cmdSyntaxPtr)(ct74))->cmd[1] = (count),(cmdSyntaxPtr)(ct74))
+
+// If reporting DSS changes, map to character sequence FFh, 2, MSR
+//
+#define CMD_STATDATA(arg) \
+ (((cmdSyntaxPtr)(ct75))->cmd[1] = (arg),(cmdSyntaxPtr)(ct75))
+
+#define CSTD_DISABLE// Report DSS changes as status packets only (default)
+#define CSTD_ENABLE // Report DSS changes as in-band data sequence as well as
+ // by status packet.
+
+#define CMD_BREAK_ON (cmdSyntaxPtr)(ct76)// Set break and stop xmit
+#define CMD_BREAK_OFF (cmdSyntaxPtr)(ct77)// End break and restart xmit
+#define CMD_GETFC (cmdSyntaxPtr)(ct78)// Request for flow control packet
+ // from board.
+
+// Transmit this character immediately
+//
+#define CMD_XMIT_NOW(ch) \
+ (((cmdSyntaxPtr)(ct79))->cmd[1] = (ch),(cmdSyntaxPtr)(ct79))
+
+// Set baud rate via "divisor latch"
+//
+#define CMD_DIVISOR_LATCH(which,value) \
+ (((cmdSyntaxPtr)(ct80))->cmd[1] = (which), \
+ *(USHORT *)(((cmdSyntaxPtr)(ct80))->cmd[2]) = (value), \
+ (cmdSyntaxPtr)(ct80))
+
+#define CDL_RX 1 // Set receiver rate
+#define CDL_TX 2 // Set transmit rate
+ // (CDL_TX | CDL_RX) Set both rates
+
+// Request for special diagnostic status pkt from the board.
+//
+#define CMD_GET_STATUS (cmdSyntaxPtr)(ct81)
+
+// Request time-stamped transmit character count packet.
+//
+#define CMD_GET_TXCNT (cmdSyntaxPtr)(ct82)
+
+// Request time-stamped receive character count packet.
+//
+#define CMD_GET_RXCNT (cmdSyntaxPtr)(ct83)
+
+// Request for box/board I.D. packet.
+#define CMD_GET_BOXIDS (cmdSyntaxPtr)(ct84)
+
+// Enable or disable multiple channels according to bit-mapped ushorts box 1-4
+//
+#define CMD_ENAB_MULT(enable, box1, box2, box3, box4) \
+ (((cmdSytaxPtr)(ct85))->cmd[1] = (enable), \
+ *(USHORT *)(((cmdSyntaxPtr)(ct85))->cmd[2]) = (box1), \
+ *(USHORT *)(((cmdSyntaxPtr)(ct85))->cmd[4]) = (box2), \
+ *(USHORT *)(((cmdSyntaxPtr)(ct85))->cmd[6]) = (box3), \
+ *(USHORT *)(((cmdSyntaxPtr)(ct85))->cmd[8]) = (box4), \
+ (cmdSyntaxPtr)(ct85))
+
+#define CEM_DISABLE 0
+#define CEM_ENABLE 1
+
+// Enable or disable receiver or receiver interrupts (default both enabled)
+//
+#define CMD_RCV_ENABLE(ch) \
+ (((cmdSyntaxPtr)(ct86))->cmd[1] = (ch),(cmdSyntaxPtr)(ct86))
+
+#define CRE_OFF 0 // Disable the receiver
+#define CRE_ON 1 // Enable the receiver
+#define CRE_INTOFF 2 // Disable receiver interrupts (to loadware)
+#define CRE_INTON 3 // Enable receiver interrupts (to loadware)
+
+// Starts up a hardware test process, which runs transparently, and sends a
+// STAT_HWFAIL packet in case a hardware failure is detected.
+//
+#define CMD_HW_TEST (cmdSyntaxPtr)(ct87)
+
+// Change receiver threshold and timeout value:
+// Defaults: timeout = 20mS
+// threshold count = 8 when DTRflow not in use,
+// threshold count = 5 when DTRflow in use.
+//
+#define CMD_RCV_THRESHOLD(count,ms) \
+ (((cmdSyntaxPtr)(ct88))->cmd[1] = (count), \
+ ((cmdSyntaxPtr)(ct88))->cmd[2] = (ms), \
+ (cmdSyntaxPtr)(ct88))
+
+// Makes the loadware report DSS signals for this channel immediately.
+//
+#define CMD_DSS_NOW (cmdSyntaxPtr)(ct89)
+
+// Set the receive silo parameters
+// timeout is ms idle wait until delivery (~VTIME)
+// threshold is max characters cause interrupt (~VMIN)
+//
+#define CMD_SET_SILO(timeout,threshold) \
+ (((cmdSyntaxPtr)(ct90))->cmd[1] = (timeout), \
+ ((cmdSyntaxPtr)(ct90))->cmd[2] = (threshold), \
+ (cmdSyntaxPtr)(ct90))
+
+// Set timed break in decisecond (1/10s)
+//
+#define CMD_LBREAK(ds) \
+ (((cmdSyntaxPtr)(ct91))->cmd[1] = (ds),(cmdSyntaxPtr)(ct66))
+
+
+
+#endif // I2CMD_H