summaryrefslogtreecommitdiff
path: root/drivers/char/ip2/i2lib.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/char/ip2/i2lib.c')
-rw-r--r--drivers/char/ip2/i2lib.c2219
1 files changed, 2219 insertions, 0 deletions
diff --git a/drivers/char/ip2/i2lib.c b/drivers/char/ip2/i2lib.c
new file mode 100644
index 000000000000..82c5f30375ac
--- /dev/null
+++ b/drivers/char/ip2/i2lib.c
@@ -0,0 +1,2219 @@
+/*******************************************************************************
+*
+* (c) 1999 by Computone Corporation
+*
+********************************************************************************
+*
+*
+* PACKAGE: Linux tty Device Driver for IntelliPort family of multiport
+* serial I/O controllers.
+*
+* DESCRIPTION: High-level interface code for the device driver. Uses the
+* Extremely Low Level Interface Support (i2ellis.c). Provides an
+* interface to the standard loadware, to support drivers or
+* application code. (This is included source code, not a separate
+* compilation module.)
+*
+*******************************************************************************/
+//------------------------------------------------------------------------------
+// Note on Strategy:
+// Once the board has been initialized, it will interrupt us when:
+// 1) It has something in the fifo for us to read (incoming data, flow control
+// packets, or whatever).
+// 2) It has stripped whatever we have sent last time in the FIFO (and
+// consequently is ready for more).
+//
+// Note also that the buffer sizes declared in i2lib.h are VERY SMALL. This
+// worsens performance considerably, but is done so that a great many channels
+// might use only a little memory.
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+// Revision History:
+//
+// 0.00 - 4/16/91 --- First Draft
+// 0.01 - 4/29/91 --- 1st beta release
+// 0.02 - 6/14/91 --- Changes to allow small model compilation
+// 0.03 - 6/17/91 MAG Break reporting protected from interrupts routines with
+// in-line asm added for moving data to/from ring buffers,
+// replacing a variety of methods used previously.
+// 0.04 - 6/21/91 MAG Initial flow-control packets not queued until
+// i2_enable_interrupts time. Former versions would enqueue
+// them at i2_init_channel time, before we knew how many
+// channels were supposed to exist!
+// 0.05 - 10/12/91 MAG Major changes: works through the ellis.c routines now;
+// supports new 16-bit protocol and expandable boards.
+// - 10/24/91 MAG Most changes in place and stable.
+// 0.06 - 2/20/92 MAG Format of CMD_HOTACK corrected: the command takes no
+// argument.
+// 0.07 -- 3/11/92 MAG Support added to store special packet types at interrupt
+// level (mostly responses to specific commands.)
+// 0.08 -- 3/30/92 MAG Support added for STAT_MODEM packet
+// 0.09 -- 6/24/93 MAG i2Link... needed to update number of boards BEFORE
+// turning on the interrupt.
+// 0.10 -- 6/25/93 MAG To avoid gruesome death from a bad board, we sanity check
+// some incoming.
+//
+// 1.1 - 12/25/96 AKM Linux version.
+// - 10/09/98 DMC Revised Linux version.
+//------------------------------------------------------------------------------
+
+//************
+//* Includes *
+//************
+
+#include <linux/sched.h>
+#include "i2lib.h"
+
+
+//***********************
+//* Function Prototypes *
+//***********************
+static void i2QueueNeeds(i2eBordStrPtr, i2ChanStrPtr, int);
+static i2ChanStrPtr i2DeQueueNeeds(i2eBordStrPtr, int );
+static void i2StripFifo(i2eBordStrPtr);
+static void i2StuffFifoBypass(i2eBordStrPtr);
+static void i2StuffFifoFlow(i2eBordStrPtr);
+static void i2StuffFifoInline(i2eBordStrPtr);
+static int i2RetryFlushOutput(i2ChanStrPtr);
+
+// Not a documented part of the library routines (careful...) but the Diagnostic
+// i2diag.c finds them useful to help the throughput in certain limited
+// single-threaded operations.
+static void iiSendPendingMail(i2eBordStrPtr);
+static void serviceOutgoingFifo(i2eBordStrPtr);
+
+// Functions defined in ip2.c as part of interrupt handling
+static void do_input(void *);
+static void do_status(void *);
+
+//***************
+//* Debug Data *
+//***************
+#ifdef DEBUG_FIFO
+
+unsigned char DBGBuf[0x4000];
+unsigned short I = 0;
+
+static void
+WriteDBGBuf(char *s, unsigned char *src, unsigned short n )
+{
+ char *p = src;
+
+ // XXX: We need a spin lock here if we ever use this again
+
+ while (*s) { // copy label
+ DBGBuf[I] = *s++;
+ I = I++ & 0x3fff;
+ }
+ while (n--) { // copy data
+ DBGBuf[I] = *p++;
+ I = I++ & 0x3fff;
+ }
+}
+
+static void
+fatality(i2eBordStrPtr pB )
+{
+ int i;
+
+ for (i=0;i<sizeof(DBGBuf);i++) {
+ if ((i%16) == 0)
+ printk("\n%4x:",i);
+ printk("%02x ",DBGBuf[i]);
+ }
+ printk("\n");
+ for (i=0;i<sizeof(DBGBuf);i++) {
+ if ((i%16) == 0)
+ printk("\n%4x:",i);
+ if (DBGBuf[i] >= ' ' && DBGBuf[i] <= '~') {
+ printk(" %c ",DBGBuf[i]);
+ } else {
+ printk(" . ");
+ }
+ }
+ printk("\n");
+ printk("Last index %x\n",I);
+}
+#endif /* DEBUG_FIFO */
+
+//********
+//* Code *
+//********
+
+static inline int
+i2Validate ( i2ChanStrPtr pCh )
+{
+ //ip2trace(pCh->port_index, ITRC_VERIFY,ITRC_ENTER,2,pCh->validity,
+ // (CHANNEL_MAGIC | CHANNEL_SUPPORT));
+ return ((pCh->validity & (CHANNEL_MAGIC_BITS | CHANNEL_SUPPORT))
+ == (CHANNEL_MAGIC | CHANNEL_SUPPORT));
+}
+
+//******************************************************************************
+// Function: iiSendPendingMail(pB)
+// Parameters: Pointer to a board structure
+// Returns: Nothing
+//
+// Description:
+// If any outgoing mail bits are set and there is outgoing mailbox is empty,
+// send the mail and clear the bits.
+//******************************************************************************
+static inline void
+iiSendPendingMail(i2eBordStrPtr pB)
+{
+ if (pB->i2eOutMailWaiting && (!pB->i2eWaitingForEmptyFifo) )
+ {
+ if (iiTrySendMail(pB, pB->i2eOutMailWaiting))
+ {
+ /* If we were already waiting for fifo to empty,
+ * or just sent MB_OUT_STUFFED, then we are
+ * still waiting for it to empty, until we should
+ * receive an MB_IN_STRIPPED from the board.
+ */
+ pB->i2eWaitingForEmptyFifo |=
+ (pB->i2eOutMailWaiting & MB_OUT_STUFFED);
+ pB->i2eOutMailWaiting = 0;
+ pB->SendPendingRetry = 0;
+ } else {
+/* The only time we hit this area is when "iiTrySendMail" has
+ failed. That only occurs when the outbound mailbox is
+ still busy with the last message. We take a short breather
+ to let the board catch up with itself and then try again.
+ 16 Retries is the limit - then we got a borked board.
+ /\/\|=mhw=|\/\/ */
+
+ if( ++pB->SendPendingRetry < 16 ) {
+
+ init_timer( &(pB->SendPendingTimer) );
+ pB->SendPendingTimer.expires = jiffies + 1;
+ pB->SendPendingTimer.function = (void*)(unsigned long)iiSendPendingMail;
+ pB->SendPendingTimer.data = (unsigned long)pB;
+ add_timer( &(pB->SendPendingTimer) );
+ } else {
+ printk( KERN_ERR "IP2: iiSendPendingMail unable to queue outbound mail\n" );
+ }
+ }
+ }
+}
+
+//******************************************************************************
+// Function: i2InitChannels(pB, nChannels, pCh)
+// Parameters: Pointer to Ellis Board structure
+// Number of channels to initialize
+// Pointer to first element in an array of channel structures
+// Returns: Success or failure
+//
+// Description:
+//
+// This function patches pointers, back-pointers, and initializes all the
+// elements in the channel structure array.
+//
+// This should be run after the board structure is initialized, through having
+// loaded the standard loadware (otherwise it complains).
+//
+// In any case, it must be done before any serious work begins initializing the
+// irq's or sending commands...
+//
+//******************************************************************************
+static int
+i2InitChannels ( i2eBordStrPtr pB, int nChannels, i2ChanStrPtr pCh)
+{
+ int index, stuffIndex;
+ i2ChanStrPtr *ppCh;
+
+ if (pB->i2eValid != I2E_MAGIC) {
+ COMPLETE(pB, I2EE_BADMAGIC);
+ }
+ if (pB->i2eState != II_STATE_STDLOADED) {
+ COMPLETE(pB, I2EE_BADSTATE);
+ }
+
+ LOCK_INIT(&pB->read_fifo_spinlock);
+ LOCK_INIT(&pB->write_fifo_spinlock);
+ LOCK_INIT(&pB->Dbuf_spinlock);
+ LOCK_INIT(&pB->Bbuf_spinlock);
+ LOCK_INIT(&pB->Fbuf_spinlock);
+
+ // NO LOCK needed yet - this is init
+
+ pB->i2eChannelPtr = pCh;
+ pB->i2eChannelCnt = nChannels;
+
+ pB->i2Fbuf_strip = pB->i2Fbuf_stuff = 0;
+ pB->i2Dbuf_strip = pB->i2Dbuf_stuff = 0;
+ pB->i2Bbuf_strip = pB->i2Bbuf_stuff = 0;
+
+ pB->SendPendingRetry = 0;
+
+ memset ( pCh, 0, sizeof (i2ChanStr) * nChannels );
+
+ for (index = stuffIndex = 0, ppCh = (i2ChanStrPtr *)(pB->i2Fbuf);
+ nChannels && index < ABS_MOST_PORTS;
+ index++)
+ {
+ if ( !(pB->i2eChannelMap[index >> 4] & (1 << (index & 0xf)) ) ) {
+ continue;
+ }
+ LOCK_INIT(&pCh->Ibuf_spinlock);
+ LOCK_INIT(&pCh->Obuf_spinlock);
+ LOCK_INIT(&pCh->Cbuf_spinlock);
+ LOCK_INIT(&pCh->Pbuf_spinlock);
+ // NO LOCK needed yet - this is init
+ // Set up validity flag according to support level
+ if (pB->i2eGoodMap[index >> 4] & (1 << (index & 0xf)) ) {
+ pCh->validity = CHANNEL_MAGIC | CHANNEL_SUPPORT;
+ } else {
+ pCh->validity = CHANNEL_MAGIC;
+ }
+ pCh->pMyBord = pB; /* Back-pointer */
+
+ // Prepare an outgoing flow-control packet to send as soon as the chance
+ // occurs.
+ if ( pCh->validity & CHANNEL_SUPPORT ) {
+ pCh->infl.hd.i2sChannel = index;
+ pCh->infl.hd.i2sCount = 5;
+ pCh->infl.hd.i2sType = PTYPE_BYPASS;
+ pCh->infl.fcmd = 37;
+ pCh->infl.asof = 0;
+ pCh->infl.room = IBUF_SIZE - 1;
+
+ pCh->whenSendFlow = (IBUF_SIZE/5)*4; // when 80% full
+
+ // The following is similar to calling i2QueueNeeds, except that this
+ // is done in longhand, since we are setting up initial conditions on
+ // many channels at once.
+ pCh->channelNeeds = NEED_FLOW; // Since starting from scratch
+ pCh->sinceLastFlow = 0; // No bytes received since last flow
+ // control packet was queued
+ stuffIndex++;
+ *ppCh++ = pCh; // List this channel as needing
+ // initial flow control packet sent
+ }
+
+ // Don't allow anything to be sent until the status packets come in from
+ // the board.
+
+ pCh->outfl.asof = 0;
+ pCh->outfl.room = 0;
+
+ // Initialize all the ring buffers
+
+ pCh->Ibuf_stuff = pCh->Ibuf_strip = 0;
+ pCh->Obuf_stuff = pCh->Obuf_strip = 0;
+ pCh->Cbuf_stuff = pCh->Cbuf_strip = 0;
+
+ memset( &pCh->icount, 0, sizeof (struct async_icount) );
+ pCh->hotKeyIn = HOT_CLEAR;
+ pCh->channelOptions = 0;
+ pCh->bookMarks = 0;
+ init_waitqueue_head(&pCh->pBookmarkWait);
+
+ init_waitqueue_head(&pCh->open_wait);
+ init_waitqueue_head(&pCh->close_wait);
+ init_waitqueue_head(&pCh->delta_msr_wait);
+
+ // Set base and divisor so default custom rate is 9600
+ pCh->BaudBase = 921600; // MAX for ST654, changed after we get
+ pCh->BaudDivisor = 96; // the boxids (UART types) later
+
+ pCh->dataSetIn = 0;
+ pCh->dataSetOut = 0;
+
+ pCh->wopen = 0;
+ pCh->throttled = 0;
+
+ pCh->speed = CBR_9600;
+
+ pCh->flags = 0;
+
+ pCh->ClosingDelay = 5*HZ/10;
+ pCh->ClosingWaitTime = 30*HZ;
+
+ // Initialize task queue objects
+ INIT_WORK(&pCh->tqueue_input, do_input, pCh);
+ INIT_WORK(&pCh->tqueue_status, do_status, pCh);
+
+#ifdef IP2DEBUG_TRACE
+ pCh->trace = ip2trace;
+#endif
+
+ ++pCh;
+ --nChannels;
+ }
+ // No need to check for wrap here; this is initialization.
+ pB->i2Fbuf_stuff = stuffIndex;
+ COMPLETE(pB, I2EE_GOOD);
+
+}
+
+//******************************************************************************
+// Function: i2DeQueueNeeds(pB, type)
+// Parameters: Pointer to a board structure
+// type bit map: may include NEED_INLINE, NEED_BYPASS, or NEED_FLOW
+// Returns:
+// Pointer to a channel structure
+//
+// Description: Returns pointer struct of next channel that needs service of
+// the type specified. Otherwise returns a NULL reference.
+//
+//******************************************************************************
+static i2ChanStrPtr
+i2DeQueueNeeds(i2eBordStrPtr pB, int type)
+{
+ unsigned short queueIndex;
+ unsigned long flags;
+
+ i2ChanStrPtr pCh = NULL;
+
+ switch(type) {
+
+ case NEED_INLINE:
+
+ WRITE_LOCK_IRQSAVE(&pB->Dbuf_spinlock,flags);
+ if ( pB->i2Dbuf_stuff != pB->i2Dbuf_strip)
+ {
+ queueIndex = pB->i2Dbuf_strip;
+ pCh = pB->i2Dbuf[queueIndex];
+ queueIndex++;
+ if (queueIndex >= CH_QUEUE_SIZE) {
+ queueIndex = 0;
+ }
+ pB->i2Dbuf_strip = queueIndex;
+ pCh->channelNeeds &= ~NEED_INLINE;
+ }
+ WRITE_UNLOCK_IRQRESTORE(&pB->Dbuf_spinlock,flags);
+ break;
+
+ case NEED_BYPASS:
+
+ WRITE_LOCK_IRQSAVE(&pB->Bbuf_spinlock,flags);
+ if (pB->i2Bbuf_stuff != pB->i2Bbuf_strip)
+ {
+ queueIndex = pB->i2Bbuf_strip;
+ pCh = pB->i2Bbuf[queueIndex];
+ queueIndex++;
+ if (queueIndex >= CH_QUEUE_SIZE) {
+ queueIndex = 0;
+ }
+ pB->i2Bbuf_strip = queueIndex;
+ pCh->channelNeeds &= ~NEED_BYPASS;
+ }
+ WRITE_UNLOCK_IRQRESTORE(&pB->Bbuf_spinlock,flags);
+ break;
+
+ case NEED_FLOW:
+
+ WRITE_LOCK_IRQSAVE(&pB->Fbuf_spinlock,flags);
+ if (pB->i2Fbuf_stuff != pB->i2Fbuf_strip)
+ {
+ queueIndex = pB->i2Fbuf_strip;
+ pCh = pB->i2Fbuf[queueIndex];
+ queueIndex++;
+ if (queueIndex >= CH_QUEUE_SIZE) {
+ queueIndex = 0;
+ }
+ pB->i2Fbuf_strip = queueIndex;
+ pCh->channelNeeds &= ~NEED_FLOW;
+ }
+ WRITE_UNLOCK_IRQRESTORE(&pB->Fbuf_spinlock,flags);
+ break;
+ default:
+ printk(KERN_ERR "i2DeQueueNeeds called with bad type:%x\n",type);
+ break;
+ }
+ return pCh;
+}
+
+//******************************************************************************
+// Function: i2QueueNeeds(pB, pCh, type)
+// Parameters: Pointer to a board structure
+// Pointer to a channel structure
+// type bit map: may include NEED_INLINE, NEED_BYPASS, or NEED_FLOW
+// Returns: Nothing
+//
+// Description:
+// For each type of need selected, if the given channel is not already in the
+// queue, adds it, and sets the flag indicating it is in the queue.
+//******************************************************************************
+static void
+i2QueueNeeds(i2eBordStrPtr pB, i2ChanStrPtr pCh, int type)
+{
+ unsigned short queueIndex;
+ unsigned long flags;
+
+ // We turn off all the interrupts during this brief process, since the
+ // interrupt-level code might want to put things on the queue as well.
+
+ switch (type) {
+
+ case NEED_INLINE:
+
+ WRITE_LOCK_IRQSAVE(&pB->Dbuf_spinlock,flags);
+ if ( !(pCh->channelNeeds & NEED_INLINE) )
+ {
+ pCh->channelNeeds |= NEED_INLINE;
+ queueIndex = pB->i2Dbuf_stuff;
+ pB->i2Dbuf[queueIndex++] = pCh;
+ if (queueIndex >= CH_QUEUE_SIZE)
+ queueIndex = 0;
+ pB->i2Dbuf_stuff = queueIndex;
+ }
+ WRITE_UNLOCK_IRQRESTORE(&pB->Dbuf_spinlock,flags);
+ break;
+
+ case NEED_BYPASS:
+
+ WRITE_LOCK_IRQSAVE(&pB->Bbuf_spinlock,flags);
+ if ((type & NEED_BYPASS) && !(pCh->channelNeeds & NEED_BYPASS))
+ {
+ pCh->channelNeeds |= NEED_BYPASS;
+ queueIndex = pB->i2Bbuf_stuff;
+ pB->i2Bbuf[queueIndex++] = pCh;
+ if (queueIndex >= CH_QUEUE_SIZE)
+ queueIndex = 0;
+ pB->i2Bbuf_stuff = queueIndex;
+ }
+ WRITE_UNLOCK_IRQRESTORE(&pB->Bbuf_spinlock,flags);
+ break;
+
+ case NEED_FLOW:
+
+ WRITE_LOCK_IRQSAVE(&pB->Fbuf_spinlock,flags);
+ if ((type & NEED_FLOW) && !(pCh->channelNeeds & NEED_FLOW))
+ {
+ pCh->channelNeeds |= NEED_FLOW;
+ queueIndex = pB->i2Fbuf_stuff;
+ pB->i2Fbuf[queueIndex++] = pCh;
+ if (queueIndex >= CH_QUEUE_SIZE)
+ queueIndex = 0;
+ pB->i2Fbuf_stuff = queueIndex;
+ }
+ WRITE_UNLOCK_IRQRESTORE(&pB->Fbuf_spinlock,flags);
+ break;
+
+ case NEED_CREDIT:
+ pCh->channelNeeds |= NEED_CREDIT;
+ break;
+ default:
+ printk(KERN_ERR "i2QueueNeeds called with bad type:%x\n",type);
+ break;
+ }
+ return;
+}
+
+//******************************************************************************
+// Function: i2QueueCommands(type, pCh, timeout, nCommands, pCs,...)
+// Parameters: type - PTYPE_BYPASS or PTYPE_INLINE
+// pointer to the channel structure
+// maximum period to wait
+// number of commands (n)
+// n commands
+// Returns: Number of commands sent, or -1 for error
+//
+// get board lock before calling
+//
+// Description:
+// Queues up some commands to be sent to a channel. To send possibly several
+// bypass or inline commands to the given channel. The timeout parameter
+// indicates how many HUNDREDTHS OF SECONDS to wait until there is room:
+// 0 = return immediately if no room, -ive = wait forever, +ive = number of
+// 1/100 seconds to wait. Return values:
+// -1 Some kind of nasty error: bad channel structure or invalid arguments.
+// 0 No room to send all the commands
+// (+) Number of commands sent
+//******************************************************************************
+static int
+i2QueueCommands(int type, i2ChanStrPtr pCh, int timeout, int nCommands,
+ cmdSyntaxPtr pCs0,...)
+{
+ int totalsize = 0;
+ int blocksize;
+ int lastended;
+ cmdSyntaxPtr *ppCs;
+ cmdSyntaxPtr pCs;
+ int count;
+ int flag;
+ i2eBordStrPtr pB;
+
+ unsigned short maxBlock;
+ unsigned short maxBuff;
+ short bufroom;
+ unsigned short stuffIndex;
+ unsigned char *pBuf;
+ unsigned char *pInsert;
+ unsigned char *pDest, *pSource;
+ unsigned short channel;
+ int cnt;
+ unsigned long flags = 0;
+ rwlock_t *lock_var_p = NULL;
+
+ // Make sure the channel exists, otherwise do nothing
+ if ( !i2Validate ( pCh ) ) {
+ return -1;
+ }
+
+ ip2trace (CHANN, ITRC_QUEUE, ITRC_ENTER, 0 );
+
+ pB = pCh->pMyBord;
+
+ // Board must also exist, and THE INTERRUPT COMMAND ALREADY SENT
+ if (pB->i2eValid != I2E_MAGIC || pB->i2eUsingIrq == IRQ_UNDEFINED) {
+ return -2;
+ }
+ // If the board has gone fatal, return bad, and also hit the trap routine if
+ // it exists.
+ if (pB->i2eFatal) {
+ if ( pB->i2eFatalTrap ) {
+ (*(pB)->i2eFatalTrap)(pB);
+ }
+ return -3;
+ }
+ // Set up some variables, Which buffers are we using? How big are they?
+ switch(type)
+ {
+ case PTYPE_INLINE:
+ flag = INL;
+ maxBlock = MAX_OBUF_BLOCK;
+ maxBuff = OBUF_SIZE;
+ pBuf = pCh->Obuf;
+ break;
+ case PTYPE_BYPASS:
+ flag = BYP;
+ maxBlock = MAX_CBUF_BLOCK;
+ maxBuff = CBUF_SIZE;
+ pBuf = pCh->Cbuf;
+ break;
+ default:
+ return -4;
+ }
+ // Determine the total size required for all the commands
+ totalsize = blocksize = sizeof(i2CmdHeader);
+ lastended = 0;
+ ppCs = &pCs0;
+ for ( count = nCommands; count; count--, ppCs++)
+ {
+ pCs = *ppCs;
+ cnt = pCs->length;
+ // Will a new block be needed for this one?
+ // Two possible reasons: too
+ // big or previous command has to be at the end of a packet.
+ if ((blocksize + cnt > maxBlock) || lastended) {
+ blocksize = sizeof(i2CmdHeader);
+ totalsize += sizeof(i2CmdHeader);
+ }
+ totalsize += cnt;
+ blocksize += cnt;
+
+ // If this command had to end a block, then we will make sure to
+ // account for it should there be any more blocks.
+ lastended = pCs->flags & END;
+ }
+ for (;;) {
+ // Make sure any pending flush commands go out before we add more data.
+ if ( !( pCh->flush_flags && i2RetryFlushOutput( pCh ) ) ) {
+ // How much room (this time through) ?
+ switch(type) {
+ case PTYPE_INLINE:
+ lock_var_p = &pCh->Obuf_spinlock;
+ WRITE_LOCK_IRQSAVE(lock_var_p,flags);
+ stuffIndex = pCh->Obuf_stuff;
+ bufroom = pCh->Obuf_strip - stuffIndex;
+ break;
+ case PTYPE_BYPASS:
+ lock_var_p = &pCh->Cbuf_spinlock;
+ WRITE_LOCK_IRQSAVE(lock_var_p,flags);
+ stuffIndex = pCh->Cbuf_stuff;
+ bufroom = pCh->Cbuf_strip - stuffIndex;
+ break;
+ default:
+ return -5;
+ }
+ if (--bufroom < 0) {
+ bufroom += maxBuff;
+ }
+
+ ip2trace (CHANN, ITRC_QUEUE, 2, 1, bufroom );
+
+ // Check for overflow
+ if (totalsize <= bufroom) {
+ // Normal Expected path - We still hold LOCK
+ break; /* from for()- Enough room: goto proceed */
+ }
+ }
+
+ ip2trace (CHANN, ITRC_QUEUE, 3, 1, totalsize );
+
+ // Prepare to wait for buffers to empty
+ WRITE_UNLOCK_IRQRESTORE(lock_var_p,flags);
+ serviceOutgoingFifo(pB); // Dump what we got
+
+ if (timeout == 0) {
+ return 0; // Tired of waiting
+ }
+ if (timeout > 0)
+ timeout--; // So negative values == forever
+
+ if (!in_interrupt()) {
+ current->state = TASK_INTERRUPTIBLE;
+ schedule_timeout(1); // short nap
+ } else {
+ // we cannot sched/sleep in interrrupt silly
+ return 0;
+ }
+ if (signal_pending(current)) {
+ return 0; // Wake up! Time to die!!!
+ }
+
+ ip2trace (CHANN, ITRC_QUEUE, 4, 0 );
+
+ } // end of for(;;)
+
+ // At this point we have room and the lock - stick them in.
+ channel = pCh->infl.hd.i2sChannel;
+ pInsert = &pBuf[stuffIndex]; // Pointer to start of packet
+ pDest = CMD_OF(pInsert); // Pointer to start of command
+
+ // When we start counting, the block is the size of the header
+ for (blocksize = sizeof(i2CmdHeader), count = nCommands,
+ lastended = 0, ppCs = &pCs0;
+ count;
+ count--, ppCs++)
+ {
+ pCs = *ppCs; // Points to command protocol structure
+
+ // If this is a bookmark request command, post the fact that a bookmark
+ // request is pending. NOTE THIS TRICK ONLY WORKS BECAUSE CMD_BMARK_REQ
+ // has no parameters! The more general solution would be to reference
+ // pCs->cmd[0].
+ if (pCs == CMD_BMARK_REQ) {
+ pCh->bookMarks++;
+
+ ip2trace (CHANN, ITRC_DRAIN, 30, 1, pCh->bookMarks );
+
+ }
+ cnt = pCs->length;
+
+ // If this command would put us over the maximum block size or
+ // if the last command had to be at the end of a block, we end
+ // the existing block here and start a new one.
+ if ((blocksize + cnt > maxBlock) || lastended) {
+
+ ip2trace (CHANN, ITRC_QUEUE, 5, 0 );
+
+ PTYPE_OF(pInsert) = type;
+ CHANNEL_OF(pInsert) = channel;
+ // count here does not include the header
+ CMD_COUNT_OF(pInsert) = blocksize - sizeof(i2CmdHeader);
+ stuffIndex += blocksize;
+ if(stuffIndex >= maxBuff) {
+ stuffIndex = 0;
+ pInsert = pBuf;
+ }
+ pInsert = &pBuf[stuffIndex]; // Pointer to start of next pkt
+ pDest = CMD_OF(pInsert);
+ blocksize = sizeof(i2CmdHeader);
+ }
+ // Now we know there is room for this one in the current block
+
+ blocksize += cnt; // Total bytes in this command
+ pSource = pCs->cmd; // Copy the command into the buffer
+ while (cnt--) {
+ *pDest++ = *pSource++;
+ }
+ // If this command had to end a block, then we will make sure to account
+ // for it should there be any more blocks.
+ lastended = pCs->flags & END;
+ } // end for
+ // Clean up the final block by writing header, etc
+
+ PTYPE_OF(pInsert) = type;
+ CHANNEL_OF(pInsert) = channel;
+ // count here does not include the header
+ CMD_COUNT_OF(pInsert) = blocksize - sizeof(i2CmdHeader);
+ stuffIndex += blocksize;
+ if(stuffIndex >= maxBuff) {
+ stuffIndex = 0;
+ pInsert = pBuf;
+ }
+ // Updates the index, and post the need for service. When adding these to
+ // the queue of channels, we turn off the interrupt while doing so,
+ // because at interrupt level we might want to push a channel back to the
+ // end of the queue.
+ switch(type)
+ {
+ case PTYPE_INLINE:
+ pCh->Obuf_stuff = stuffIndex; // Store buffer pointer
+ WRITE_UNLOCK_IRQRESTORE(&pCh->Obuf_spinlock,flags);
+
+ pB->debugInlineQueued++;
+ // Add the channel pointer to list of channels needing service (first
+ // come...), if it's not already there.
+ i2QueueNeeds(pB, pCh, NEED_INLINE);
+ break;
+
+ case PTYPE_BYPASS:
+ pCh->Cbuf_stuff = stuffIndex; // Store buffer pointer
+ WRITE_UNLOCK_IRQRESTORE(&pCh->Cbuf_spinlock,flags);
+
+ pB->debugBypassQueued++;
+ // Add the channel pointer to list of channels needing service (first
+ // come...), if it's not already there.
+ i2QueueNeeds(pB, pCh, NEED_BYPASS);
+ break;
+ }
+
+ ip2trace (CHANN, ITRC_QUEUE, ITRC_RETURN, 1, nCommands );
+
+ return nCommands; // Good status: number of commands sent
+}
+
+//******************************************************************************
+// Function: i2GetStatus(pCh,resetBits)
+// Parameters: Pointer to a channel structure
+// Bit map of status bits to clear
+// Returns: Bit map of current status bits
+//
+// Description:
+// Returns the state of data set signals, and whether a break has been received,
+// (see i2lib.h for bit-mapped result). resetBits is a bit-map of any status
+// bits to be cleared: I2_BRK, I2_PAR, I2_FRA, I2_OVR,... These are cleared
+// AFTER the condition is passed. If pCh does not point to a valid channel,
+// returns -1 (which would be impossible otherwise.
+//******************************************************************************
+static int
+i2GetStatus(i2ChanStrPtr pCh, int resetBits)
+{
+ unsigned short status;
+ i2eBordStrPtr pB;
+
+ ip2trace (CHANN, ITRC_STATUS, ITRC_ENTER, 2, pCh->dataSetIn, resetBits );
+
+ // Make sure the channel exists, otherwise do nothing */
+ if ( !i2Validate ( pCh ) )
+ return -1;
+
+ pB = pCh->pMyBord;
+
+ status = pCh->dataSetIn;
+
+ // Clear any specified error bits: but note that only actual error bits can
+ // be cleared, regardless of the value passed.
+ if (resetBits)
+ {
+ pCh->dataSetIn &= ~(resetBits & (I2_BRK | I2_PAR | I2_FRA | I2_OVR));
+ pCh->dataSetIn &= ~(I2_DDCD | I2_DCTS | I2_DDSR | I2_DRI);
+ }
+
+ ip2trace (CHANN, ITRC_STATUS, ITRC_RETURN, 1, pCh->dataSetIn );
+
+ return status;
+}
+
+//******************************************************************************
+// Function: i2Input(pChpDest,count)
+// Parameters: Pointer to a channel structure
+// Pointer to data buffer
+// Number of bytes to read
+// Returns: Number of bytes read, or -1 for error
+//
+// Description:
+// Strips data from the input buffer and writes it to pDest. If there is a
+// collosal blunder, (invalid structure pointers or the like), returns -1.
+// Otherwise, returns the number of bytes read.
+//******************************************************************************
+static int
+i2Input(i2ChanStrPtr pCh)
+{
+ int amountToMove;
+ unsigned short stripIndex;
+ int count;
+ unsigned long flags = 0;
+
+ ip2trace (CHANN, ITRC_INPUT, ITRC_ENTER, 0);
+
+ // Ensure channel structure seems real
+ if ( !i2Validate( pCh ) ) {
+ count = -1;
+ goto i2Input_exit;
+ }
+ WRITE_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,flags);
+
+ // initialize some accelerators and private copies
+ stripIndex = pCh->Ibuf_strip;
+
+ count = pCh->Ibuf_stuff - stripIndex;
+
+ // If buffer is empty or requested data count was 0, (trivial case) return
+ // without any further thought.
+ if ( count == 0 ) {
+ WRITE_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags);
+ goto i2Input_exit;
+ }
+ // Adjust for buffer wrap
+ if ( count < 0 ) {
+ count += IBUF_SIZE;
+ }
+ // Don't give more than can be taken by the line discipline
+ amountToMove = pCh->pTTY->ldisc.receive_room( pCh->pTTY );
+ if (count > amountToMove) {
+ count = amountToMove;
+ }
+ // How much could we copy without a wrap?
+ amountToMove = IBUF_SIZE - stripIndex;
+
+ if (amountToMove > count) {
+ amountToMove = count;
+ }
+ // Move the first block
+ pCh->pTTY->ldisc.receive_buf( pCh->pTTY,
+ &(pCh->Ibuf[stripIndex]), NULL, amountToMove );
+ // If we needed to wrap, do the second data move
+ if (count > amountToMove) {
+ pCh->pTTY->ldisc.receive_buf( pCh->pTTY,
+ pCh->Ibuf, NULL, count - amountToMove );
+ }
+ // Bump and wrap the stripIndex all at once by the amount of data read. This
+ // method is good regardless of whether the data was in one or two pieces.
+ stripIndex += count;
+ if (stripIndex >= IBUF_SIZE) {
+ stripIndex -= IBUF_SIZE;
+ }
+ pCh->Ibuf_strip = stripIndex;
+
+ // Update our flow control information and possibly queue ourselves to send
+ // it, depending on how much data has been stripped since the last time a
+ // packet was sent.
+ pCh->infl.asof += count;
+
+ if ((pCh->sinceLastFlow += count) >= pCh->whenSendFlow) {
+ pCh->sinceLastFlow -= pCh->whenSendFlow;
+ WRITE_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags);
+ i2QueueNeeds(pCh->pMyBord, pCh, NEED_FLOW);
+ } else {
+ WRITE_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags);
+ }
+
+i2Input_exit:
+
+ ip2trace (CHANN, ITRC_INPUT, ITRC_RETURN, 1, count);
+
+ return count;
+}
+
+//******************************************************************************
+// Function: i2InputFlush(pCh)
+// Parameters: Pointer to a channel structure
+// Returns: Number of bytes stripped, or -1 for error
+//
+// Description:
+// Strips any data from the input buffer. If there is a collosal blunder,
+// (invalid structure pointers or the like), returns -1. Otherwise, returns the
+// number of bytes stripped.
+//******************************************************************************
+static int
+i2InputFlush(i2ChanStrPtr pCh)
+{
+ int count;
+ unsigned long flags;
+
+ // Ensure channel structure seems real
+ if ( !i2Validate ( pCh ) )
+ return -1;
+
+ ip2trace (CHANN, ITRC_INPUT, 10, 0);
+
+ WRITE_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,flags);
+ count = pCh->Ibuf_stuff - pCh->Ibuf_strip;
+
+ // Adjust for buffer wrap
+ if (count < 0) {
+ count += IBUF_SIZE;
+ }
+
+ // Expedient way to zero out the buffer
+ pCh->Ibuf_strip = pCh->Ibuf_stuff;
+
+
+ // Update our flow control information and possibly queue ourselves to send
+ // it, depending on how much data has been stripped since the last time a
+ // packet was sent.
+
+ pCh->infl.asof += count;
+
+ if ( (pCh->sinceLastFlow += count) >= pCh->whenSendFlow )
+ {
+ pCh->sinceLastFlow -= pCh->whenSendFlow;
+ WRITE_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags);
+ i2QueueNeeds(pCh->pMyBord, pCh, NEED_FLOW);
+ } else {
+ WRITE_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags);
+ }
+
+ ip2trace (CHANN, ITRC_INPUT, 19, 1, count);
+
+ return count;
+}
+
+//******************************************************************************
+// Function: i2InputAvailable(pCh)
+// Parameters: Pointer to a channel structure
+// Returns: Number of bytes available, or -1 for error
+//
+// Description:
+// If there is a collosal blunder, (invalid structure pointers or the like),
+// returns -1. Otherwise, returns the number of bytes stripped. Otherwise,
+// returns the number of bytes available in the buffer.
+//******************************************************************************
+#if 0
+static int
+i2InputAvailable(i2ChanStrPtr pCh)
+{
+ int count;
+
+ // Ensure channel structure seems real
+ if ( !i2Validate ( pCh ) ) return -1;
+
+
+ // initialize some accelerators and private copies
+ READ_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,flags);
+ count = pCh->Ibuf_stuff - pCh->Ibuf_strip;
+ READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags);
+
+ // Adjust for buffer wrap
+ if (count < 0)
+ {
+ count += IBUF_SIZE;
+ }
+
+ return count;
+}
+#endif
+
+//******************************************************************************
+// Function: i2Output(pCh, pSource, count)
+// Parameters: Pointer to channel structure
+// Pointer to source data
+// Number of bytes to send
+// Returns: Number of bytes sent, or -1 for error
+//
+// Description:
+// Queues the data at pSource to be sent as data packets to the board. If there
+// is a collosal blunder, (invalid structure pointers or the like), returns -1.
+// Otherwise, returns the number of bytes written. What if there is not enough
+// room for all the data? If pCh->channelOptions & CO_NBLOCK_WRITE is set, then
+// we transfer as many characters as we can now, then return. If this bit is
+// clear (default), routine will spin along until all the data is buffered.
+// Should this occur, the 1-ms delay routine is called while waiting to avoid
+// applications that one cannot break out of.
+//******************************************************************************
+static int
+i2Output(i2ChanStrPtr pCh, const char *pSource, int count, int user )
+{
+ i2eBordStrPtr pB;
+ unsigned char *pInsert;
+ int amountToMove;
+ int countOriginal = count;
+ unsigned short channel;
+ unsigned short stuffIndex;
+ unsigned long flags;
+ int rc = 0;
+
+ int bailout = 10;
+
+ ip2trace (CHANN, ITRC_OUTPUT, ITRC_ENTER, 2, count, user );
+
+ // Ensure channel structure seems real
+ if ( !i2Validate ( pCh ) )
+ return -1;
+
+ // initialize some accelerators and private copies
+ pB = pCh->pMyBord;
+ channel = pCh->infl.hd.i2sChannel;
+
+ // If the board has gone fatal, return bad, and also hit the trap routine if
+ // it exists.
+ if (pB->i2eFatal) {
+ if (pB->i2eFatalTrap) {
+ (*(pB)->i2eFatalTrap)(pB);
+ }
+ return -1;
+ }
+ // Proceed as though we would do everything
+ while ( count > 0 ) {
+
+ // How much room in output buffer is there?
+ READ_LOCK_IRQSAVE(&pCh->Obuf_spinlock,flags);
+ amountToMove = pCh->Obuf_strip - pCh->Obuf_stuff - 1;
+ READ_UNLOCK_IRQRESTORE(&pCh->Obuf_spinlock,flags);
+ if (amountToMove < 0) {
+ amountToMove += OBUF_SIZE;
+ }
+ // Subtract off the headers size and see how much room there is for real
+ // data. If this is negative, we will discover later.
+ amountToMove -= sizeof (i2DataHeader);
+
+ // Don't move more (now) than can go in a single packet
+ if ( amountToMove > (int)(MAX_OBUF_BLOCK - sizeof(i2DataHeader)) ) {
+ amountToMove = MAX_OBUF_BLOCK - sizeof(i2DataHeader);
+ }
+ // Don't move more than the count we were given
+ if (amountToMove > count) {
+ amountToMove = count;
+ }
+ // Now we know how much we must move: NB because the ring buffers have
+ // an overflow area at the end, we needn't worry about wrapping in the
+ // middle of a packet.
+
+// Small WINDOW here with no LOCK but I can't call Flush with LOCK
+// We would be flushing (or ending flush) anyway
+
+ ip2trace (CHANN, ITRC_OUTPUT, 10, 1, amountToMove );
+
+ if ( !(pCh->flush_flags && i2RetryFlushOutput(pCh) )
+ && amountToMove > 0 )
+ {
+ WRITE_LOCK_IRQSAVE(&pCh->Obuf_spinlock,flags);
+ stuffIndex = pCh->Obuf_stuff;
+
+ // Had room to move some data: don't know whether the block size,
+ // buffer space, or what was the limiting factor...
+ pInsert = &(pCh->Obuf[stuffIndex]);
+
+ // Set up the header
+ CHANNEL_OF(pInsert) = channel;
+ PTYPE_OF(pInsert) = PTYPE_DATA;
+ TAG_OF(pInsert) = 0;
+ ID_OF(pInsert) = ID_ORDINARY_DATA;
+ DATA_COUNT_OF(pInsert) = amountToMove;
+
+ // Move the data
+ if ( user ) {
+ rc = copy_from_user((char*)(DATA_OF(pInsert)), pSource,
+ amountToMove );
+ } else {
+ memcpy( (char*)(DATA_OF(pInsert)), pSource, amountToMove );
+ }
+ // Adjust pointers and indices
+ pSource += amountToMove;
+ pCh->Obuf_char_count += amountToMove;
+ stuffIndex += amountToMove + sizeof(i2DataHeader);
+ count -= amountToMove;
+
+ if (stuffIndex >= OBUF_SIZE) {
+ stuffIndex = 0;
+ }
+ pCh->Obuf_stuff = stuffIndex;
+
+ WRITE_UNLOCK_IRQRESTORE(&pCh->Obuf_spinlock,flags);
+
+ ip2trace (CHANN, ITRC_OUTPUT, 13, 1, stuffIndex );
+
+ } else {
+
+ // Cannot move data
+ // becuz we need to stuff a flush
+ // or amount to move is <= 0
+
+ ip2trace(CHANN, ITRC_OUTPUT, 14, 3,
+ amountToMove, pB->i2eFifoRemains,
+ pB->i2eWaitingForEmptyFifo );
+
+ // Put this channel back on queue
+ // this ultimatly gets more data or wakes write output
+ i2QueueNeeds(pB, pCh, NEED_INLINE);
+
+ if ( pB->i2eWaitingForEmptyFifo ) {
+
+ ip2trace (CHANN, ITRC_OUTPUT, 16, 0 );
+
+ // or schedule
+ if (!in_interrupt()) {
+
+ ip2trace (CHANN, ITRC_OUTPUT, 61, 0 );
+
+ current->state = TASK_INTERRUPTIBLE;
+ schedule_timeout(2);
+ if (signal_pending(current)) {
+ break;
+ }
+ continue;
+ } else {
+
+ ip2trace (CHANN, ITRC_OUTPUT, 62, 0 );
+
+ // let interrupt in = WAS restore_flags()
+ // We hold no lock nor is irq off anymore???
+
+ break;
+ }
+ break; // from while(count)
+ }
+ else if ( pB->i2eFifoRemains < 32 && !pB->i2eTxMailEmpty ( pB ) )
+ {
+ ip2trace (CHANN, ITRC_OUTPUT, 19, 2,
+ pB->i2eFifoRemains,
+ pB->i2eTxMailEmpty );
+
+ break; // from while(count)
+ } else if ( pCh->channelNeeds & NEED_CREDIT ) {
+
+ ip2trace (CHANN, ITRC_OUTPUT, 22, 0 );
+
+ break; // from while(count)
+ } else if ( --bailout) {
+
+ // Try to throw more things (maybe not us) in the fifo if we're
+ // not already waiting for it.
+
+ ip2trace (CHANN, ITRC_OUTPUT, 20, 0 );
+
+ serviceOutgoingFifo(pB);
+ //break; CONTINUE;
+ } else {
+ ip2trace (CHANN, ITRC_OUTPUT, 21, 3,
+ pB->i2eFifoRemains,
+ pB->i2eOutMailWaiting,
+ pB->i2eWaitingForEmptyFifo );
+
+ break; // from while(count)
+ }
+ }
+ } // End of while(count)
+
+ i2QueueNeeds(pB, pCh, NEED_INLINE);
+
+ // We drop through either when the count expires, or when there is some
+ // count left, but there was a non-blocking write.
+ if (countOriginal > count) {
+
+ ip2trace (CHANN, ITRC_OUTPUT, 17, 2, countOriginal, count );
+
+ serviceOutgoingFifo( pB );
+ }
+
+ ip2trace (CHANN, ITRC_OUTPUT, ITRC_RETURN, 2, countOriginal, count );
+
+ return countOriginal - count;
+}
+
+//******************************************************************************
+// Function: i2FlushOutput(pCh)
+// Parameters: Pointer to a channel structure
+// Returns: Nothing
+//
+// Description:
+// Sends bypass command to start flushing (waiting possibly forever until there
+// is room), then sends inline command to stop flushing output, (again waiting
+// possibly forever).
+//******************************************************************************
+static inline void
+i2FlushOutput(i2ChanStrPtr pCh)
+{
+
+ ip2trace (CHANN, ITRC_FLUSH, 1, 1, pCh->flush_flags );
+
+ if (pCh->flush_flags)
+ return;
+
+ if ( 1 != i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_STARTFL) ) {
+ pCh->flush_flags = STARTFL_FLAG; // Failed - flag for later
+
+ ip2trace (CHANN, ITRC_FLUSH, 2, 0 );
+
+ } else if ( 1 != i2QueueCommands(PTYPE_INLINE, pCh, 0, 1, CMD_STOPFL) ) {
+ pCh->flush_flags = STOPFL_FLAG; // Failed - flag for later
+
+ ip2trace (CHANN, ITRC_FLUSH, 3, 0 );
+ }
+}
+
+static int
+i2RetryFlushOutput(i2ChanStrPtr pCh)
+{
+ int old_flags = pCh->flush_flags;
+
+ ip2trace (CHANN, ITRC_FLUSH, 14, 1, old_flags );
+
+ pCh->flush_flags = 0; // Clear flag so we can avoid recursion
+ // and queue the commands
+
+ if ( old_flags & STARTFL_FLAG ) {
+ if ( 1 == i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_STARTFL) ) {
+ old_flags = STOPFL_FLAG; //Success - send stop flush
+ } else {
+ old_flags = STARTFL_FLAG; //Failure - Flag for retry later
+ }
+
+ ip2trace (CHANN, ITRC_FLUSH, 15, 1, old_flags );
+
+ }
+ if ( old_flags & STOPFL_FLAG ) {
+ if (1 == i2QueueCommands(PTYPE_INLINE, pCh, 0, 1, CMD_STOPFL)) {
+ old_flags = 0; // Success - clear flags
+ }
+
+ ip2trace (CHANN, ITRC_FLUSH, 16, 1, old_flags );
+ }
+ pCh->flush_flags = old_flags;
+
+ ip2trace (CHANN, ITRC_FLUSH, 17, 1, old_flags );
+
+ return old_flags;
+}
+
+//******************************************************************************
+// Function: i2DrainOutput(pCh,timeout)
+// Parameters: Pointer to a channel structure
+// Maximum period to wait
+// Returns: ?
+//
+// Description:
+// Uses the bookmark request command to ask the board to send a bookmark back as
+// soon as all the data is completely sent.
+//******************************************************************************
+static void
+i2DrainWakeup(i2ChanStrPtr pCh)
+{
+ ip2trace (CHANN, ITRC_DRAIN, 10, 1, pCh->BookmarkTimer.expires );
+
+ pCh->BookmarkTimer.expires = 0;
+ wake_up_interruptible( &pCh->pBookmarkWait );
+}
+
+static void
+i2DrainOutput(i2ChanStrPtr pCh, int timeout)
+{
+ wait_queue_t wait;
+ i2eBordStrPtr pB;
+
+ ip2trace (CHANN, ITRC_DRAIN, ITRC_ENTER, 1, pCh->BookmarkTimer.expires);
+
+ pB = pCh->pMyBord;
+ // If the board has gone fatal, return bad,
+ // and also hit the trap routine if it exists.
+ if (pB->i2eFatal) {
+ if (pB->i2eFatalTrap) {
+ (*(pB)->i2eFatalTrap)(pB);
+ }
+ return;
+ }
+ if ((timeout > 0) && (pCh->BookmarkTimer.expires == 0 )) {
+ // One per customer (channel)
+ init_timer( &(pCh->BookmarkTimer) );
+ pCh->BookmarkTimer.expires = jiffies + timeout;
+ pCh->BookmarkTimer.function = (void*)(unsigned long)i2DrainWakeup;
+ pCh->BookmarkTimer.data = (unsigned long)pCh;
+
+ ip2trace (CHANN, ITRC_DRAIN, 1, 1, pCh->BookmarkTimer.expires );
+
+ add_timer( &(pCh->BookmarkTimer) );
+ }
+
+ i2QueueCommands( PTYPE_INLINE, pCh, -1, 1, CMD_BMARK_REQ );
+
+ init_waitqueue_entry(&wait, current);
+ add_wait_queue(&(pCh->pBookmarkWait), &wait);
+ set_current_state( TASK_INTERRUPTIBLE );
+
+ serviceOutgoingFifo( pB );
+
+ schedule(); // Now we take our interruptible sleep on
+
+ // Clean up the queue
+ set_current_state( TASK_RUNNING );
+ remove_wait_queue(&(pCh->pBookmarkWait), &wait);
+
+ // if expires == 0 then timer poped, then do not need to del_timer
+ if ((timeout > 0) && pCh->BookmarkTimer.expires &&
+ time_before(jiffies, pCh->BookmarkTimer.expires)) {
+ del_timer( &(pCh->BookmarkTimer) );
+ pCh->BookmarkTimer.expires = 0;
+
+ ip2trace (CHANN, ITRC_DRAIN, 3, 1, pCh->BookmarkTimer.expires );
+
+ }
+ ip2trace (CHANN, ITRC_DRAIN, ITRC_RETURN, 1, pCh->BookmarkTimer.expires );
+ return;
+}
+
+//******************************************************************************
+// Function: i2OutputFree(pCh)
+// Parameters: Pointer to a channel structure
+// Returns: Space in output buffer
+//
+// Description:
+// Returns -1 if very gross error. Otherwise returns the amount of bytes still
+// free in the output buffer.
+//******************************************************************************
+static int
+i2OutputFree(i2ChanStrPtr pCh)
+{
+ int amountToMove;
+ unsigned long flags;
+
+ // Ensure channel structure seems real
+ if ( !i2Validate ( pCh ) ) {
+ return -1;
+ }
+ READ_LOCK_IRQSAVE(&pCh->Obuf_spinlock,flags);
+ amountToMove = pCh->Obuf_strip - pCh->Obuf_stuff - 1;
+ READ_UNLOCK_IRQRESTORE(&pCh->Obuf_spinlock,flags);
+
+ if (amountToMove < 0) {
+ amountToMove += OBUF_SIZE;
+ }
+ // If this is negative, we will discover later
+ amountToMove -= sizeof(i2DataHeader);
+
+ return (amountToMove < 0) ? 0 : amountToMove;
+}
+static void
+
+ip2_owake( PTTY tp)
+{
+ i2ChanStrPtr pCh;
+
+ if (tp == NULL) return;
+
+ pCh = tp->driver_data;
+
+ ip2trace (CHANN, ITRC_SICMD, 10, 2, tp->flags,
+ (1 << TTY_DO_WRITE_WAKEUP) );
+
+ wake_up_interruptible ( &tp->write_wait );
+ if ( ( tp->flags & (1 << TTY_DO_WRITE_WAKEUP) )
+ && tp->ldisc.write_wakeup )
+ {
+ (tp->ldisc.write_wakeup) ( tp );
+
+ ip2trace (CHANN, ITRC_SICMD, 11, 0 );
+
+ }
+}
+
+static inline void
+set_baud_params(i2eBordStrPtr pB)
+{
+ int i,j;
+ i2ChanStrPtr *pCh;
+
+ pCh = (i2ChanStrPtr *) pB->i2eChannelPtr;
+
+ for (i = 0; i < ABS_MAX_BOXES; i++) {
+ if (pB->channelBtypes.bid_value[i]) {
+ if (BID_HAS_654(pB->channelBtypes.bid_value[i])) {
+ for (j = 0; j < ABS_BIGGEST_BOX; j++) {
+ if (pCh[i*16+j] == NULL)
+ break;
+ (pCh[i*16+j])->BaudBase = 921600; // MAX for ST654
+ (pCh[i*16+j])->BaudDivisor = 96;
+ }
+ } else { // has cirrus cd1400
+ for (j = 0; j < ABS_BIGGEST_BOX; j++) {
+ if (pCh[i*16+j] == NULL)
+ break;
+ (pCh[i*16+j])->BaudBase = 115200; // MAX for CD1400
+ (pCh[i*16+j])->BaudDivisor = 12;
+ }
+ }
+ }
+ }
+}
+
+//******************************************************************************
+// Function: i2StripFifo(pB)
+// Parameters: Pointer to a board structure
+// Returns: ?
+//
+// Description:
+// Strips all the available data from the incoming FIFO, identifies the type of
+// packet, and either buffers the data or does what needs to be done.
+//
+// Note there is no overflow checking here: if the board sends more data than it
+// ought to, we will not detect it here, but blindly overflow...
+//******************************************************************************
+
+// A buffer for reading in blocks for unknown channels
+static unsigned char junkBuffer[IBUF_SIZE];
+
+// A buffer to read in a status packet. Because of the size of the count field
+// for these things, the maximum packet size must be less than MAX_CMD_PACK_SIZE
+static unsigned char cmdBuffer[MAX_CMD_PACK_SIZE + 4];
+
+// This table changes the bit order from MSR order given by STAT_MODEM packet to
+// status bits used in our library.
+static char xlatDss[16] = {
+0 | 0 | 0 | 0 ,
+0 | 0 | 0 | I2_CTS ,
+0 | 0 | I2_DSR | 0 ,
+0 | 0 | I2_DSR | I2_CTS ,
+0 | I2_RI | 0 | 0 ,
+0 | I2_RI | 0 | I2_CTS ,
+0 | I2_RI | I2_DSR | 0 ,
+0 | I2_RI | I2_DSR | I2_CTS ,
+I2_DCD | 0 | 0 | 0 ,
+I2_DCD | 0 | 0 | I2_CTS ,
+I2_DCD | 0 | I2_DSR | 0 ,
+I2_DCD | 0 | I2_DSR | I2_CTS ,
+I2_DCD | I2_RI | 0 | 0 ,
+I2_DCD | I2_RI | 0 | I2_CTS ,
+I2_DCD | I2_RI | I2_DSR | 0 ,
+I2_DCD | I2_RI | I2_DSR | I2_CTS };
+
+static inline void
+i2StripFifo(i2eBordStrPtr pB)
+{
+ i2ChanStrPtr pCh;
+ int channel;
+ int count;
+ unsigned short stuffIndex;
+ int amountToRead;
+ unsigned char *pc, *pcLimit;
+ unsigned char uc;
+ unsigned char dss_change;
+ unsigned long bflags,cflags;
+
+// ip2trace (ITRC_NO_PORT, ITRC_SFIFO, ITRC_ENTER, 0 );
+
+ while (HAS_INPUT(pB)) {
+// ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 2, 0 );
+
+ // Process packet from fifo a one atomic unit
+ WRITE_LOCK_IRQSAVE(&pB->read_fifo_spinlock,bflags);
+
+ // The first word (or two bytes) will have channel number and type of
+ // packet, possibly other information
+ pB->i2eLeadoffWord[0] = iiReadWord(pB);
+
+ switch(PTYPE_OF(pB->i2eLeadoffWord))
+ {
+ case PTYPE_DATA:
+ pB->got_input = 1;
+
+// ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 3, 0 );
+
+ channel = CHANNEL_OF(pB->i2eLeadoffWord); /* Store channel */
+ count = iiReadWord(pB); /* Count is in the next word */
+
+// NEW: Check the count for sanity! Should the hardware fail, our death
+// is more pleasant. While an oversize channel is acceptable (just more
+// than the driver supports), an over-length count clearly means we are
+// sick!
+ if ( ((unsigned int)count) > IBUF_SIZE ) {
+ pB->i2eFatal = 2;
+ WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock,bflags);
+ return; /* Bail out ASAP */
+ }
+ // Channel is illegally big ?
+ if ((channel >= pB->i2eChannelCnt) ||
+ (NULL==(pCh = ((i2ChanStrPtr*)pB->i2eChannelPtr)[channel])))
+ {
+ iiReadBuf(pB, junkBuffer, count);
+ WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock,bflags);
+ break; /* From switch: ready for next packet */
+ }
+
+ // Channel should be valid, then
+
+ // If this is a hot-key, merely post its receipt for now. These are
+ // always supposed to be 1-byte packets, so we won't even check the
+ // count. Also we will post an acknowledgement to the board so that
+ // more data can be forthcoming. Note that we are not trying to use
+ // these sequences in this driver, merely to robustly ignore them.
+ if(ID_OF(pB->i2eLeadoffWord) == ID_HOT_KEY)
+ {
+ pCh->hotKeyIn = iiReadWord(pB) & 0xff;
+ WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock,bflags);
+ i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_HOTACK);
+ break; /* From the switch: ready for next packet */
+ }
+
+ // Normal data! We crudely assume there is room for the data in our
+ // buffer because the board wouldn't have exceeded his credit limit.
+ WRITE_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,cflags);
+ // We have 2 locks now
+ stuffIndex = pCh->Ibuf_stuff;
+ amountToRead = IBUF_SIZE - stuffIndex;
+ if (amountToRead > count)
+ amountToRead = count;
+
+ // stuffIndex would have been already adjusted so there would
+ // always be room for at least one, and count is always at least
+ // one.
+
+ iiReadBuf(pB, &(pCh->Ibuf[stuffIndex]), amountToRead);
+ pCh->icount.rx += amountToRead;
+
+ // Update the stuffIndex by the amount of data moved. Note we could
+ // never ask for more data than would just fit. However, we might
+ // have read in one more byte than we wanted because the read
+ // rounds up to even bytes. If this byte is on the end of the
+ // packet, and is padding, we ignore it. If the byte is part of
+ // the actual data, we need to move it.
+
+ stuffIndex += amountToRead;
+
+ if (stuffIndex >= IBUF_SIZE) {
+ if ((amountToRead & 1) && (count > amountToRead)) {
+ pCh->Ibuf[0] = pCh->Ibuf[IBUF_SIZE];
+ amountToRead++;
+ stuffIndex = 1;
+ } else {
+ stuffIndex = 0;
+ }
+ }
+
+ // If there is anything left over, read it as well
+ if (count > amountToRead) {
+ amountToRead = count - amountToRead;
+ iiReadBuf(pB, &(pCh->Ibuf[stuffIndex]), amountToRead);
+ pCh->icount.rx += amountToRead;
+ stuffIndex += amountToRead;
+ }
+
+ // Update stuff index
+ pCh->Ibuf_stuff = stuffIndex;
+ WRITE_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,cflags);
+ WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock,bflags);
+
+#ifdef USE_IQ
+ schedule_work(&pCh->tqueue_input);
+#else
+ do_input(pCh);
+#endif
+
+ // Note we do not need to maintain any flow-control credits at this
+ // time: if we were to increment .asof and decrement .room, there
+ // would be no net effect. Instead, when we strip data, we will
+ // increment .asof and leave .room unchanged.
+
+ break; // From switch: ready for next packet
+
+ case PTYPE_STATUS:
+ ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 4, 0 );
+
+ count = CMD_COUNT_OF(pB->i2eLeadoffWord);
+
+ iiReadBuf(pB, cmdBuffer, count);
+ // We can release early with buffer grab
+ WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock,bflags);
+
+ pc = cmdBuffer;
+ pcLimit = &(cmdBuffer[count]);
+
+ while (pc < pcLimit) {
+ channel = *pc++;
+
+ ip2trace (channel, ITRC_SFIFO, 7, 2, channel, *pc );
+
+ /* check for valid channel */
+ if (channel < pB->i2eChannelCnt
+ &&
+ (pCh = (((i2ChanStrPtr*)pB->i2eChannelPtr)[channel])) != NULL
+ )
+ {
+ dss_change = 0;
+
+ switch (uc = *pc++)
+ {
+ /* Breaks and modem signals are easy: just update status */
+ case STAT_CTS_UP:
+ if ( !(pCh->dataSetIn & I2_CTS) )
+ {
+ pCh->dataSetIn |= I2_DCTS;
+ pCh->icount.cts++;
+ dss_change = 1;
+ }
+ pCh->dataSetIn |= I2_CTS;
+ break;
+
+ case STAT_CTS_DN:
+ if ( pCh->dataSetIn & I2_CTS )
+ {
+ pCh->dataSetIn |= I2_DCTS;
+ pCh->icount.cts++;
+ dss_change = 1;
+ }
+ pCh->dataSetIn &= ~I2_CTS;
+ break;
+
+ case STAT_DCD_UP:
+ ip2trace (channel, ITRC_MODEM, 1, 1, pCh->dataSetIn );
+
+ if ( !(pCh->dataSetIn & I2_DCD) )
+ {
+ ip2trace (CHANN, ITRC_MODEM, 2, 0 );
+ pCh->dataSetIn |= I2_DDCD;
+ pCh->icount.dcd++;
+ dss_change = 1;
+ }
+ pCh->dataSetIn |= I2_DCD;
+
+ ip2trace (channel, ITRC_MODEM, 3, 1, pCh->dataSetIn );
+ break;
+
+ case STAT_DCD_DN:
+ ip2trace (channel, ITRC_MODEM, 4, 1, pCh->dataSetIn );
+ if ( pCh->dataSetIn & I2_DCD )
+ {
+ ip2trace (channel, ITRC_MODEM, 5, 0 );
+ pCh->dataSetIn |= I2_DDCD;
+ pCh->icount.dcd++;
+ dss_change = 1;
+ }
+ pCh->dataSetIn &= ~I2_DCD;
+
+ ip2trace (channel, ITRC_MODEM, 6, 1, pCh->dataSetIn );
+ break;
+
+ case STAT_DSR_UP:
+ if ( !(pCh->dataSetIn & I2_DSR) )
+ {
+ pCh->dataSetIn |= I2_DDSR;
+ pCh->icount.dsr++;
+ dss_change = 1;
+ }
+ pCh->dataSetIn |= I2_DSR;
+ break;
+
+ case STAT_DSR_DN:
+ if ( pCh->dataSetIn & I2_DSR )
+ {
+ pCh->dataSetIn |= I2_DDSR;
+ pCh->icount.dsr++;
+ dss_change = 1;
+ }
+ pCh->dataSetIn &= ~I2_DSR;
+ break;
+
+ case STAT_RI_UP:
+ if ( !(pCh->dataSetIn & I2_RI) )
+ {
+ pCh->dataSetIn |= I2_DRI;
+ pCh->icount.rng++;
+ dss_change = 1;
+ }
+ pCh->dataSetIn |= I2_RI ;
+ break;
+
+ case STAT_RI_DN:
+ // to be compat with serial.c
+ //if ( pCh->dataSetIn & I2_RI )
+ //{
+ // pCh->dataSetIn |= I2_DRI;
+ // pCh->icount.rng++;
+ // dss_change = 1;
+ //}
+ pCh->dataSetIn &= ~I2_RI ;
+ break;
+
+ case STAT_BRK_DET:
+ pCh->dataSetIn |= I2_BRK;
+ pCh->icount.brk++;
+ dss_change = 1;
+ break;
+
+ // Bookmarks? one less request we're waiting for
+ case STAT_BMARK:
+ pCh->bookMarks--;
+ if (pCh->bookMarks <= 0 ) {
+ pCh->bookMarks = 0;
+ wake_up_interruptible( &pCh->pBookmarkWait );
+
+ ip2trace (channel, ITRC_DRAIN, 20, 1, pCh->BookmarkTimer.expires );
+ }
+ break;
+
+ // Flow control packets? Update the new credits, and if
+ // someone was waiting for output, queue him up again.
+ case STAT_FLOW:
+ pCh->outfl.room =
+ ((flowStatPtr)pc)->room -
+ (pCh->outfl.asof - ((flowStatPtr)pc)->asof);
+
+ ip2trace (channel, ITRC_STFLW, 1, 1, pCh->outfl.room );
+
+ if (pCh->channelNeeds & NEED_CREDIT)
+ {
+ ip2trace (channel, ITRC_STFLW, 2, 1, pCh->channelNeeds);
+
+ pCh->channelNeeds &= ~NEED_CREDIT;
+ i2QueueNeeds(pB, pCh, NEED_INLINE);
+ if ( pCh->pTTY )
+ ip2_owake(pCh->pTTY);
+ }
+
+ ip2trace (channel, ITRC_STFLW, 3, 1, pCh->channelNeeds);
+
+ pc += sizeof(flowStat);
+ break;
+
+ /* Special packets: */
+ /* Just copy the information into the channel structure */
+
+ case STAT_STATUS:
+
+ pCh->channelStatus = *((debugStatPtr)pc);
+ pc += sizeof(debugStat);
+ break;
+
+ case STAT_TXCNT:
+
+ pCh->channelTcount = *((cntStatPtr)pc);
+ pc += sizeof(cntStat);
+ break;
+
+ case STAT_RXCNT:
+
+ pCh->channelRcount = *((cntStatPtr)pc);
+ pc += sizeof(cntStat);
+ break;
+
+ case STAT_BOXIDS:
+ pB->channelBtypes = *((bidStatPtr)pc);
+ pc += sizeof(bidStat);
+ set_baud_params(pB);
+ break;
+
+ case STAT_HWFAIL:
+ i2QueueCommands (PTYPE_INLINE, pCh, 0, 1, CMD_HW_TEST);
+ pCh->channelFail = *((failStatPtr)pc);
+ pc += sizeof(failStat);
+ break;
+
+ /* No explicit match? then
+ * Might be an error packet...
+ */
+ default:
+ switch (uc & STAT_MOD_ERROR)
+ {
+ case STAT_ERROR:
+ if (uc & STAT_E_PARITY) {
+ pCh->dataSetIn |= I2_PAR;
+ pCh->icount.parity++;
+ }
+ if (uc & STAT_E_FRAMING){
+ pCh->dataSetIn |= I2_FRA;
+ pCh->icount.frame++;
+ }
+ if (uc & STAT_E_OVERRUN){
+ pCh->dataSetIn |= I2_OVR;
+ pCh->icount.overrun++;
+ }
+ break;
+
+ case STAT_MODEM:
+ // the answer to DSS_NOW request (not change)
+ pCh->dataSetIn = (pCh->dataSetIn
+ & ~(I2_RI | I2_CTS | I2_DCD | I2_DSR) )
+ | xlatDss[uc & 0xf];
+ wake_up_interruptible ( &pCh->dss_now_wait );
+ default:
+ break;
+ }
+ } /* End of switch on status type */
+ if (dss_change) {
+#ifdef USE_IQ
+ schedule_work(&pCh->tqueue_status);
+#else
+ do_status(pCh);
+#endif
+ }
+ }
+ else /* Or else, channel is invalid */
+ {
+ // Even though the channel is invalid, we must test the
+ // status to see how much additional data it has (to be
+ // skipped)
+ switch (*pc++)
+ {
+ case STAT_FLOW:
+ pc += 4; /* Skip the data */
+ break;
+
+ default:
+ break;
+ }
+ }
+ } // End of while (there is still some status packet left)
+ break;
+
+ default: // Neither packet? should be impossible
+ ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 5, 1,
+ PTYPE_OF(pB->i2eLeadoffWord) );
+
+ break;
+ } // End of switch on type of packets
+ } //while(board HAS_INPUT)
+
+ ip2trace (ITRC_NO_PORT, ITRC_SFIFO, ITRC_RETURN, 0 );
+
+ // Send acknowledgement to the board even if there was no data!
+ pB->i2eOutMailWaiting |= MB_IN_STRIPPED;
+ return;
+}
+
+//******************************************************************************
+// Function: i2Write2Fifo(pB,address,count)
+// Parameters: Pointer to a board structure, source address, byte count
+// Returns: bytes written
+//
+// Description:
+// Writes count bytes to board io address(implied) from source
+// Adjusts count, leaves reserve for next time around bypass cmds
+//******************************************************************************
+static int
+i2Write2Fifo(i2eBordStrPtr pB, unsigned char *source, int count,int reserve)
+{
+ int rc = 0;
+ unsigned long flags;
+ WRITE_LOCK_IRQSAVE(&pB->write_fifo_spinlock,flags);
+ if (!pB->i2eWaitingForEmptyFifo) {
+ if (pB->i2eFifoRemains > (count+reserve)) {
+ pB->i2eFifoRemains -= count;
+ iiWriteBuf(pB, source, count);
+ pB->i2eOutMailWaiting |= MB_OUT_STUFFED;
+ rc = count;
+ }
+ }
+ WRITE_UNLOCK_IRQRESTORE(&pB->write_fifo_spinlock,flags);
+ return rc;
+}
+//******************************************************************************
+// Function: i2StuffFifoBypass(pB)
+// Parameters: Pointer to a board structure
+// Returns: Nothing
+//
+// Description:
+// Stuffs as many bypass commands into the fifo as possible. This is simpler
+// than stuffing data or inline commands to fifo, since we do not have
+// flow-control to deal with.
+//******************************************************************************
+static inline void
+i2StuffFifoBypass(i2eBordStrPtr pB)
+{
+ i2ChanStrPtr pCh;
+ unsigned char *pRemove;
+ unsigned short stripIndex;
+ unsigned short packetSize;
+ unsigned short paddedSize;
+ unsigned short notClogged = 1;
+ unsigned long flags;
+
+ int bailout = 1000;
+
+ // Continue processing so long as there are entries, or there is room in the
+ // fifo. Each entry represents a channel with something to do.
+ while ( --bailout && notClogged &&
+ (NULL != (pCh = i2DeQueueNeeds(pB,NEED_BYPASS))))
+ {
+ WRITE_LOCK_IRQSAVE(&pCh->Cbuf_spinlock,flags);
+ stripIndex = pCh->Cbuf_strip;
+
+ // as long as there are packets for this channel...
+
+ while (stripIndex != pCh->Cbuf_stuff) {
+ pRemove = &(pCh->Cbuf[stripIndex]);
+ packetSize = CMD_COUNT_OF(pRemove) + sizeof(i2CmdHeader);
+ paddedSize = ROUNDUP(packetSize);
+
+ if (paddedSize > 0) {
+ if ( 0 == i2Write2Fifo(pB, pRemove, paddedSize,0)) {
+ notClogged = 0; /* fifo full */
+ i2QueueNeeds(pB, pCh, NEED_BYPASS); // Put back on queue
+ break; // Break from the channel
+ }
+ }
+#ifdef DEBUG_FIFO
+WriteDBGBuf("BYPS", pRemove, paddedSize);
+#endif /* DEBUG_FIFO */
+ pB->debugBypassCount++;
+
+ pRemove += packetSize;
+ stripIndex += packetSize;
+ if (stripIndex >= CBUF_SIZE) {
+ stripIndex = 0;
+ pRemove = pCh->Cbuf;
+ }
+ }
+ // Done with this channel. Move to next, removing this one from
+ // the queue of channels if we cleaned it out (i.e., didn't get clogged.
+ pCh->Cbuf_strip = stripIndex;
+ WRITE_UNLOCK_IRQRESTORE(&pCh->Cbuf_spinlock,flags);
+ } // Either clogged or finished all the work
+
+#ifdef IP2DEBUG_TRACE
+ if ( !bailout ) {
+ ip2trace (ITRC_NO_PORT, ITRC_ERROR, 1, 0 );
+ }
+#endif
+}
+
+//******************************************************************************
+// Function: i2StuffFifoFlow(pB)
+// Parameters: Pointer to a board structure
+// Returns: Nothing
+//
+// Description:
+// Stuffs as many flow control packets into the fifo as possible. This is easier
+// even than doing normal bypass commands, because there is always at most one
+// packet, already assembled, for each channel.
+//******************************************************************************
+static inline void
+i2StuffFifoFlow(i2eBordStrPtr pB)
+{
+ i2ChanStrPtr pCh;
+ unsigned short paddedSize = ROUNDUP(sizeof(flowIn));
+
+ ip2trace (ITRC_NO_PORT, ITRC_SFLOW, ITRC_ENTER, 2,
+ pB->i2eFifoRemains, paddedSize );
+
+ // Continue processing so long as there are entries, or there is room in the
+ // fifo. Each entry represents a channel with something to do.
+ while ( (NULL != (pCh = i2DeQueueNeeds(pB,NEED_FLOW)))) {
+ pB->debugFlowCount++;
+
+ // NO Chan LOCK needed ???
+ if ( 0 == i2Write2Fifo(pB,(unsigned char *)&(pCh->infl),paddedSize,0)) {
+ break;
+ }
+#ifdef DEBUG_FIFO
+ WriteDBGBuf("FLOW",(unsigned char *) &(pCh->infl), paddedSize);
+#endif /* DEBUG_FIFO */
+
+ } // Either clogged or finished all the work
+
+ ip2trace (ITRC_NO_PORT, ITRC_SFLOW, ITRC_RETURN, 0 );
+}
+
+//******************************************************************************
+// Function: i2StuffFifoInline(pB)
+// Parameters: Pointer to a board structure
+// Returns: Nothing
+//
+// Description:
+// Stuffs as much data and inline commands into the fifo as possible. This is
+// the most complex fifo-stuffing operation, since there if now the channel
+// flow-control issue to deal with.
+//******************************************************************************
+static inline void
+i2StuffFifoInline(i2eBordStrPtr pB)
+{
+ i2ChanStrPtr pCh;
+ unsigned char *pRemove;
+ unsigned short stripIndex;
+ unsigned short packetSize;
+ unsigned short paddedSize;
+ unsigned short notClogged = 1;
+ unsigned short flowsize;
+ unsigned long flags;
+
+ int bailout = 1000;
+ int bailout2;
+
+ ip2trace (ITRC_NO_PORT, ITRC_SICMD, ITRC_ENTER, 3, pB->i2eFifoRemains,
+ pB->i2Dbuf_strip, pB->i2Dbuf_stuff );
+
+ // Continue processing so long as there are entries, or there is room in the
+ // fifo. Each entry represents a channel with something to do.
+ while ( --bailout && notClogged &&
+ (NULL != (pCh = i2DeQueueNeeds(pB,NEED_INLINE))) )
+ {
+ WRITE_LOCK_IRQSAVE(&pCh->Obuf_spinlock,flags);
+ stripIndex = pCh->Obuf_strip;
+
+ ip2trace (CHANN, ITRC_SICMD, 3, 2, stripIndex, pCh->Obuf_stuff );
+
+ // as long as there are packets for this channel...
+ bailout2 = 1000;
+ while ( --bailout2 && stripIndex != pCh->Obuf_stuff) {
+ pRemove = &(pCh->Obuf[stripIndex]);
+
+ // Must determine whether this be a data or command packet to
+ // calculate correctly the header size and the amount of
+ // flow-control credit this type of packet will use.
+ if (PTYPE_OF(pRemove) == PTYPE_DATA) {
+ flowsize = DATA_COUNT_OF(pRemove);
+ packetSize = flowsize + sizeof(i2DataHeader);
+ } else {
+ flowsize = CMD_COUNT_OF(pRemove);
+ packetSize = flowsize + sizeof(i2CmdHeader);
+ }
+ flowsize = CREDIT_USAGE(flowsize);
+ paddedSize = ROUNDUP(packetSize);
+
+ ip2trace (CHANN, ITRC_SICMD, 4, 2, pB->i2eFifoRemains, paddedSize );
+
+ // If we don't have enough credits from the board to send the data,
+ // flag the channel that we are waiting for flow control credit, and
+ // break out. This will clean up this channel and remove us from the
+ // queue of hot things to do.
+
+ ip2trace (CHANN, ITRC_SICMD, 5, 2, pCh->outfl.room, flowsize );
+
+ if (pCh->outfl.room <= flowsize) {
+ // Do Not have the credits to send this packet.
+ i2QueueNeeds(pB, pCh, NEED_CREDIT);
+ notClogged = 0;
+ break; // So to do next channel
+ }
+ if ( (paddedSize > 0)
+ && ( 0 == i2Write2Fifo(pB, pRemove, paddedSize, 128))) {
+ // Do Not have room in fifo to send this packet.
+ notClogged = 0;
+ i2QueueNeeds(pB, pCh, NEED_INLINE);
+ break; // Break from the channel
+ }
+#ifdef DEBUG_FIFO
+WriteDBGBuf("DATA", pRemove, paddedSize);
+#endif /* DEBUG_FIFO */
+ pB->debugInlineCount++;
+
+ pCh->icount.tx += flowsize;
+ // Update current credits
+ pCh->outfl.room -= flowsize;
+ pCh->outfl.asof += flowsize;
+ if (PTYPE_OF(pRemove) == PTYPE_DATA) {
+ pCh->Obuf_char_count -= DATA_COUNT_OF(pRemove);
+ }
+ pRemove += packetSize;
+ stripIndex += packetSize;
+
+ ip2trace (CHANN, ITRC_SICMD, 6, 2, stripIndex, pCh->Obuf_strip);
+
+ if (stripIndex >= OBUF_SIZE) {
+ stripIndex = 0;
+ pRemove = pCh->Obuf;
+
+ ip2trace (CHANN, ITRC_SICMD, 7, 1, stripIndex );
+
+ }
+ } /* while */
+ if ( !bailout2 ) {
+ ip2trace (CHANN, ITRC_ERROR, 3, 0 );
+ }
+ // Done with this channel. Move to next, removing this one from the
+ // queue of channels if we cleaned it out (i.e., didn't get clogged.
+ pCh->Obuf_strip = stripIndex;
+ WRITE_UNLOCK_IRQRESTORE(&pCh->Obuf_spinlock,flags);
+ if ( notClogged )
+ {
+
+ ip2trace (CHANN, ITRC_SICMD, 8, 0 );
+
+ if ( pCh->pTTY ) {
+ ip2_owake(pCh->pTTY);
+ }
+ }
+ } // Either clogged or finished all the work
+
+ if ( !bailout ) {
+ ip2trace (ITRC_NO_PORT, ITRC_ERROR, 4, 0 );
+ }
+
+ ip2trace (ITRC_NO_PORT, ITRC_SICMD, ITRC_RETURN, 1,pB->i2Dbuf_strip);
+}
+
+//******************************************************************************
+// Function: serviceOutgoingFifo(pB)
+// Parameters: Pointer to a board structure
+// Returns: Nothing
+//
+// Description:
+// Helper routine to put data in the outgoing fifo, if we aren't already waiting
+// for something to be there. If the fifo has only room for a very little data,
+// go head and hit the board with a mailbox hit immediately. Otherwise, it will
+// have to happen later in the interrupt processing. Since this routine may be
+// called both at interrupt and foreground time, we must turn off interrupts
+// during the entire process.
+//******************************************************************************
+static void
+serviceOutgoingFifo(i2eBordStrPtr pB)
+{
+ // If we aren't currently waiting for the board to empty our fifo, service
+ // everything that is pending, in priority order (especially, Bypass before
+ // Inline).
+ if ( ! pB->i2eWaitingForEmptyFifo )
+ {
+ i2StuffFifoFlow(pB);
+ i2StuffFifoBypass(pB);
+ i2StuffFifoInline(pB);
+
+ iiSendPendingMail(pB);
+ }
+}
+
+//******************************************************************************
+// Function: i2ServiceBoard(pB)
+// Parameters: Pointer to a board structure
+// Returns: Nothing
+//
+// Description:
+// Normally this is called from interrupt level, but there is deliberately
+// nothing in here specific to being called from interrupt level. All the
+// hardware-specific, interrupt-specific things happen at the outer levels.
+//
+// For example, a timer interrupt could drive this routine for some sort of
+// polled operation. The only requirement is that the programmer deal with any
+// atomiticity/concurrency issues that result.
+//
+// This routine responds to the board's having sent mailbox information to the
+// host (which would normally cause an interrupt). This routine reads the
+// incoming mailbox. If there is no data in it, this board did not create the
+// interrupt and/or has nothing to be done to it. (Except, if we have been
+// waiting to write mailbox data to it, we may do so.
+//
+// Based on the value in the mailbox, we may take various actions.
+//
+// No checking here of pB validity: after all, it shouldn't have been called by
+// the handler unless pB were on the list.
+//******************************************************************************
+static inline int
+i2ServiceBoard ( i2eBordStrPtr pB )
+{
+ unsigned inmail;
+ unsigned long flags;
+
+
+ /* This should be atomic because of the way we are called... */
+ if (NO_MAIL_HERE == ( inmail = pB->i2eStartMail ) ) {
+ inmail = iiGetMail(pB);
+ }
+ pB->i2eStartMail = NO_MAIL_HERE;
+
+ ip2trace (ITRC_NO_PORT, ITRC_INTR, 2, 1, inmail );
+
+ if (inmail != NO_MAIL_HERE) {
+ // If the board has gone fatal, nothing to do but hit a bit that will
+ // alert foreground tasks to protest!
+ if ( inmail & MB_FATAL_ERROR ) {
+ pB->i2eFatal = 1;
+ goto exit_i2ServiceBoard;
+ }
+
+ /* Assuming no fatal condition, we proceed to do work */
+ if ( inmail & MB_IN_STUFFED ) {
+ pB->i2eFifoInInts++;
+ i2StripFifo(pB); /* There might be incoming packets */
+ }
+
+ if (inmail & MB_OUT_STRIPPED) {
+ pB->i2eFifoOutInts++;
+ WRITE_LOCK_IRQSAVE(&pB->write_fifo_spinlock,flags);
+ pB->i2eFifoRemains = pB->i2eFifoSize;
+ pB->i2eWaitingForEmptyFifo = 0;
+ WRITE_UNLOCK_IRQRESTORE(&pB->write_fifo_spinlock,flags);
+
+ ip2trace (ITRC_NO_PORT, ITRC_INTR, 30, 1, pB->i2eFifoRemains );
+
+ }
+ serviceOutgoingFifo(pB);
+ }
+
+ ip2trace (ITRC_NO_PORT, ITRC_INTR, 8, 0 );
+
+exit_i2ServiceBoard:
+
+ return 0;
+}