1 files changed, 98 insertions, 0 deletions
diff --git a/drivers/comedi/drivers/ni_routing/ni_route_values.h b/drivers/comedi/drivers/ni_routing/ni_route_values.h
new file mode 100644
index 000000000000..80e0145fb82b
--- /dev/null
+++ b/drivers/comedi/drivers/ni_routing/ni_route_values.h
@@ -0,0 +1,98 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
+/*
+ *  comedi/drivers/ni_routing/ni_route_values.h
+ *  Route information for NI boards.
+ *
+ *  COMEDI - Linux Control and Measurement Device Interface
+ *  Copyright (C) 2016 Spencer E. Olson <olsonse@umich.edu>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#ifndef _COMEDI_DRIVERS_NI_ROUTINT_NI_ROUTE_VALUES_H
+#define _COMEDI_DRIVERS_NI_ROUTINT_NI_ROUTE_VALUES_H
+
+#include "../../comedi.h"
+#include <linux/types.h>
+
+/*
+ * This file includes the tables that are a list of all the values of various
+ * signals routes available on NI hardware.  In many cases, one does not
+ * explicitly make these routes, rather one might indicate that something is
+ * used as the source of one particular trigger or another (using
+ * *_src=TRIG_EXT).
+ *
+ * This file is meant to be included by comedi/drivers/ni_routes.c
+ */
+
+#define B(x)	((x) - NI_NAMES_BASE)
+
+/** Marks a register value as valid, implemented, and tested. */
+#define V(x)	(((x) & 0x7f) | 0x80)
+
+#ifndef NI_ROUTE_VALUE_EXTERNAL_CONVERSION
+	/** Marks a register value as implemented but needing testing. */
+	#define I(x)	V(x)
+	/** Marks a register value as not implemented. */
+	#define U(x)	0x0
+
+	typedef u8 register_type;
+#else
+	/** Marks a register value as implemented but needing testing. */
+	#define I(x)	(((x) & 0x7f) | 0x100)
+	/** Marks a register value as not implemented. */
+	#define U(x)	(((x) & 0x7f) | 0x200)
+
+	/** Tests whether a register is marked as valid/implemented/tested */
+	#define MARKED_V(x)	(((x) & 0x80) != 0)
+	/** Tests whether a register is implemented but not tested */
+	#define MARKED_I(x)	(((x) & 0x100) != 0)
+	/** Tests whether a register is not implemented */
+	#define MARKED_U(x)	(((x) & 0x200) != 0)
+
+	/* need more space to store extra marks */
+	typedef u16 register_type;
+#endif
+
+/* Mask out the marking bit(s). */
+#define UNMARK(x)	((x) & 0x7f)
+
+/*
+ * Gi_SRC(x,1) implements Gi_Src_SubSelect = 1
+ *
+ * This appears to only really be a valid MUX for m-series devices.
+ */
+#define Gi_SRC(val, subsel)	((val) | ((subsel) << 6))
+
+/**
+ * struct family_route_values - Register values for all routes for a particular
+ *				family.
+ * @family: lower-case string representation of a specific series or family of
+ *	    devices from National Instruments where each member of this family
+ *	    shares the same register values for the various signal MUXes.  It
+ *	    should be noted that not all devices of any family have access to
+ *	    all routes defined.
+ * @register_values: Table of all register values for various signal MUXes on
+ *	    National Instruments devices.  The first index of this table is the
+ *	    signal destination (i.e. identification of the signal MUX).  The
+ *	    second index of this table is the signal source (i.e. input of the
+ *	    signal MUX).
+ */
+struct family_route_values {
+	const char *family;
+	const register_type register_values[NI_NUM_NAMES][NI_NUM_NAMES];
+
+};
+
+extern const struct family_route_values *const ni_all_route_values[];
+
+#endif /* _COMEDI_DRIVERS_NI_ROUTINT_NI_ROUTE_VALUES_H */