summaryrefslogtreecommitdiff
path: root/drivers/cxl
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/cxl')
-rw-r--r--drivers/cxl/cxl.h2
-rw-r--r--drivers/cxl/mem.c223
2 files changed, 218 insertions, 7 deletions
diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
index 8fd4a177fe25..6f14838c2d25 100644
--- a/drivers/cxl/cxl.h
+++ b/drivers/cxl/cxl.h
@@ -69,6 +69,7 @@ struct cxl_memdev;
* (CXL 2.0 8.2.8.4.3 Mailbox Capabilities Register)
* @mbox_mutex: Mutex to synchronize mailbox access.
* @firmware_version: Firmware version for the memory device.
+ * @enabled_commands: Hardware commands found enabled in CEL.
* @pmem_range: Persistent memory capacity information.
* @ram_range: Volatile memory capacity information.
*/
@@ -84,6 +85,7 @@ struct cxl_mem {
size_t payload_size;
struct mutex mbox_mutex; /* Protects device mailbox and firmware */
char firmware_version[0x10];
+ unsigned long *enabled_cmds;
struct range pmem_range;
struct range ram_range;
diff --git a/drivers/cxl/mem.c b/drivers/cxl/mem.c
index 5319412e245c..e31b3045e231 100644
--- a/drivers/cxl/mem.c
+++ b/drivers/cxl/mem.c
@@ -46,6 +46,8 @@ enum opcode {
CXL_MBOX_OP_INVALID = 0x0000,
CXL_MBOX_OP_RAW = CXL_MBOX_OP_INVALID,
CXL_MBOX_OP_ACTIVATE_FW = 0x0202,
+ CXL_MBOX_OP_GET_SUPPORTED_LOGS = 0x0400,
+ CXL_MBOX_OP_GET_LOG = 0x0401,
CXL_MBOX_OP_IDENTIFY = 0x4000,
CXL_MBOX_OP_SET_PARTITION_INFO = 0x4101,
CXL_MBOX_OP_SET_LSA = 0x4103,
@@ -108,10 +110,28 @@ static DEFINE_IDA(cxl_memdev_ida);
static struct dentry *cxl_debugfs;
static bool cxl_raw_allow_all;
+enum {
+ CEL_UUID,
+ VENDOR_DEBUG_UUID,
+};
+
+/* See CXL 2.0 Table 170. Get Log Input Payload */
+static const uuid_t log_uuid[] = {
+ [CEL_UUID] = UUID_INIT(0xda9c0b5, 0xbf41, 0x4b78, 0x8f, 0x79, 0x96,
+ 0xb1, 0x62, 0x3b, 0x3f, 0x17),
+ [VENDOR_DEBUG_UUID] = UUID_INIT(0xe1819d9, 0x11a9, 0x400c, 0x81, 0x1f,
+ 0xd6, 0x07, 0x19, 0x40, 0x3d, 0x86),
+};
+
/**
* struct cxl_mem_command - Driver representation of a memory device command
* @info: Command information as it exists for the UAPI
* @opcode: The actual bits used for the mailbox protocol
+ * @flags: Set of flags effecting driver behavior.
+ *
+ * * %CXL_CMD_FLAG_FORCE_ENABLE: In cases of error, commands with this flag
+ * will be enabled by the driver regardless of what hardware may have
+ * advertised.
*
* The cxl_mem_command is the driver's internal representation of commands that
* are supported by the driver. Some of these commands may not be supported by
@@ -123,9 +143,12 @@ static bool cxl_raw_allow_all;
struct cxl_mem_command {
struct cxl_command_info info;
enum opcode opcode;
+ u32 flags;
+#define CXL_CMD_FLAG_NONE 0
+#define CXL_CMD_FLAG_FORCE_ENABLE BIT(0)
};
-#define CXL_CMD(_id, sin, sout) \
+#define CXL_CMD(_id, sin, sout, _flags) \
[CXL_MEM_COMMAND_ID_##_id] = { \
.info = { \
.id = CXL_MEM_COMMAND_ID_##_id, \
@@ -133,6 +156,7 @@ struct cxl_mem_command {
.size_out = sout, \
}, \
.opcode = CXL_MBOX_OP_##_id, \
+ .flags = _flags, \
}
/*
@@ -142,10 +166,11 @@ struct cxl_mem_command {
* 0, and the user passed in 1, it is an error.
*/
static struct cxl_mem_command mem_commands[] = {
- CXL_CMD(IDENTIFY, 0, 0x43),
+ CXL_CMD(IDENTIFY, 0, 0x43, CXL_CMD_FLAG_FORCE_ENABLE),
#ifdef CONFIG_CXL_MEM_RAW_COMMANDS
- CXL_CMD(RAW, ~0, ~0),
+ CXL_CMD(RAW, ~0, ~0, 0),
#endif
+ CXL_CMD(GET_SUPPORTED_LOGS, 0, ~0, CXL_CMD_FLAG_FORCE_ENABLE),
};
/*
@@ -633,6 +658,10 @@ static int cxl_validate_cmd_from_user(struct cxl_mem *cxlm,
c = &mem_commands[send_cmd->id];
info = &c->info;
+ /* Check that the command is enabled for hardware */
+ if (!test_bit(info->id, cxlm->enabled_cmds))
+ return -ENOTTY;
+
/* Check the input buffer is the expected size */
if (info->size_in >= 0 && info->size_in != send_cmd->in.size)
return -ENOMEM;
@@ -757,6 +786,17 @@ static const struct file_operations cxl_memdev_fops = {
.llseek = noop_llseek,
};
+static inline struct cxl_mem_command *cxl_mem_find_command(u16 opcode)
+{
+ struct cxl_mem_command *c;
+
+ cxl_for_each_cmd(c)
+ if (c->opcode == opcode)
+ return c;
+
+ return NULL;
+}
+
/**
* cxl_mem_mbox_send_cmd() - Send a mailbox command to a memory device.
* @cxlm: The CXL memory device to communicate with.
@@ -777,9 +817,7 @@ static const struct file_operations cxl_memdev_fops = {
*
* Mailbox commands may execute successfully yet the device itself reported an
* error. While this distinction can be useful for commands from userspace, the
- * kernel will only be able to use results when both are successful. It's
- * expected that all callers of this function know exactly the size of the data
- * they will consume from the hardware.
+ * kernel will only be able to use results when both are successful.
*
* See __cxl_mem_mbox_send_cmd()
*/
@@ -787,6 +825,7 @@ static int cxl_mem_mbox_send_cmd(struct cxl_mem *cxlm, u16 opcode,
void *in, size_t in_size,
void *out, size_t out_size)
{
+ const struct cxl_mem_command *cmd = cxl_mem_find_command(opcode);
struct mbox_cmd mbox_cmd = {
.opcode = opcode,
.payload_in = in,
@@ -812,7 +851,11 @@ static int cxl_mem_mbox_send_cmd(struct cxl_mem *cxlm, u16 opcode,
if (mbox_cmd.return_code != CXL_MBOX_SUCCESS)
return -ENXIO;
- if (mbox_cmd.size_out != out_size)
+ /*
+ * Variable sized commands can't be validated and so it's up to the
+ * caller to do that if they wish.
+ */
+ if (cmd->info.size_out >= 0 && mbox_cmd.size_out != out_size)
return -EIO;
return 0;
@@ -947,6 +990,14 @@ static struct cxl_mem *cxl_mem_create(struct pci_dev *pdev, u32 reg_lo,
mutex_init(&cxlm->mbox_mutex);
cxlm->pdev = pdev;
cxlm->regs = regs + offset;
+ cxlm->enabled_cmds =
+ devm_kmalloc_array(dev, BITS_TO_LONGS(cxl_cmd_count),
+ sizeof(unsigned long),
+ GFP_KERNEL | __GFP_ZERO);
+ if (!cxlm->enabled_cmds) {
+ dev_err(dev, "No memory available for bitmap\n");
+ return NULL;
+ }
dev_dbg(dev, "Mapped CXL Memory Device resource\n");
return cxlm;
@@ -1166,6 +1217,160 @@ err_ref:
return rc;
}
+static int cxl_xfer_log(struct cxl_mem *cxlm, uuid_t *uuid, u32 size, u8 *out)
+{
+ u32 remaining = size;
+ u32 offset = 0;
+
+ while (remaining) {
+ u32 xfer_size = min_t(u32, remaining, cxlm->payload_size);
+ struct cxl_mbox_get_log {
+ uuid_t uuid;
+ __le32 offset;
+ __le32 length;
+ } __packed log = {
+ .uuid = *uuid,
+ .offset = cpu_to_le32(offset),
+ .length = cpu_to_le32(xfer_size)
+ };
+ int rc;
+
+ rc = cxl_mem_mbox_send_cmd(cxlm, CXL_MBOX_OP_GET_LOG, &log,
+ sizeof(log), out, xfer_size);
+ if (rc < 0)
+ return rc;
+
+ out += xfer_size;
+ remaining -= xfer_size;
+ offset += xfer_size;
+ }
+
+ return 0;
+}
+
+/**
+ * cxl_walk_cel() - Walk through the Command Effects Log.
+ * @cxlm: Device.
+ * @size: Length of the Command Effects Log.
+ * @cel: CEL
+ *
+ * Iterate over each entry in the CEL and determine if the driver supports the
+ * command. If so, the command is enabled for the device and can be used later.
+ */
+static void cxl_walk_cel(struct cxl_mem *cxlm, size_t size, u8 *cel)
+{
+ struct cel_entry {
+ __le16 opcode;
+ __le16 effect;
+ } __packed * cel_entry;
+ const int cel_entries = size / sizeof(*cel_entry);
+ int i;
+
+ cel_entry = (struct cel_entry *)cel;
+
+ for (i = 0; i < cel_entries; i++) {
+ u16 opcode = le16_to_cpu(cel_entry[i].opcode);
+ struct cxl_mem_command *cmd = cxl_mem_find_command(opcode);
+
+ if (!cmd) {
+ dev_dbg(&cxlm->pdev->dev,
+ "Opcode 0x%04x unsupported by driver", opcode);
+ continue;
+ }
+
+ set_bit(cmd->info.id, cxlm->enabled_cmds);
+ }
+}
+
+struct cxl_mbox_get_supported_logs {
+ __le16 entries;
+ u8 rsvd[6];
+ struct gsl_entry {
+ uuid_t uuid;
+ __le32 size;
+ } __packed entry[];
+} __packed;
+
+static struct cxl_mbox_get_supported_logs *cxl_get_gsl(struct cxl_mem *cxlm)
+{
+ struct cxl_mbox_get_supported_logs *ret;
+ int rc;
+
+ ret = kvmalloc(cxlm->payload_size, GFP_KERNEL);
+ if (!ret)
+ return ERR_PTR(-ENOMEM);
+
+ rc = cxl_mem_mbox_send_cmd(cxlm, CXL_MBOX_OP_GET_SUPPORTED_LOGS, NULL,
+ 0, ret, cxlm->payload_size);
+ if (rc < 0) {
+ kvfree(ret);
+ return ERR_PTR(rc);
+ }
+
+ return ret;
+}
+
+/**
+ * cxl_mem_enumerate_cmds() - Enumerate commands for a device.
+ * @cxlm: The device.
+ *
+ * Returns 0 if enumerate completed successfully.
+ *
+ * CXL devices have optional support for certain commands. This function will
+ * determine the set of supported commands for the hardware and update the
+ * enabled_cmds bitmap in the @cxlm.
+ */
+static int cxl_mem_enumerate_cmds(struct cxl_mem *cxlm)
+{
+ struct cxl_mbox_get_supported_logs *gsl;
+ struct device *dev = &cxlm->pdev->dev;
+ struct cxl_mem_command *cmd;
+ int i, rc;
+
+ gsl = cxl_get_gsl(cxlm);
+ if (IS_ERR(gsl))
+ return PTR_ERR(gsl);
+
+ rc = -ENOENT;
+ for (i = 0; i < le16_to_cpu(gsl->entries); i++) {
+ u32 size = le32_to_cpu(gsl->entry[i].size);
+ uuid_t uuid = gsl->entry[i].uuid;
+ u8 *log;
+
+ dev_dbg(dev, "Found LOG type %pU of size %d", &uuid, size);
+
+ if (!uuid_equal(&uuid, &log_uuid[CEL_UUID]))
+ continue;
+
+ log = kvmalloc(size, GFP_KERNEL);
+ if (!log) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ rc = cxl_xfer_log(cxlm, &uuid, size, log);
+ if (rc) {
+ kvfree(log);
+ goto out;
+ }
+
+ cxl_walk_cel(cxlm, size, log);
+ kvfree(log);
+
+ /* In case CEL was bogus, enable some default commands. */
+ cxl_for_each_cmd(cmd)
+ if (cmd->flags & CXL_CMD_FLAG_FORCE_ENABLE)
+ set_bit(cmd->info.id, cxlm->enabled_cmds);
+
+ /* Found the required CEL */
+ rc = 0;
+ }
+
+out:
+ kvfree(gsl);
+ return rc;
+}
+
/**
* cxl_mem_identify() - Send the IDENTIFY command to the device.
* @cxlm: The device to identify.
@@ -1266,6 +1471,10 @@ static int cxl_mem_probe(struct pci_dev *pdev, const struct pci_device_id *id)
if (rc)
return rc;
+ rc = cxl_mem_enumerate_cmds(cxlm);
+ if (rc)
+ return rc;
+
rc = cxl_mem_identify(cxlm);
if (rc)
return rc;