diff options
Diffstat (limited to 'drivers/dma/at_hdmac.c')
| -rw-r--r-- | drivers/dma/at_hdmac.c | 40 |
1 files changed, 25 insertions, 15 deletions
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index fb89ecbf0cc5..2d147712cbc6 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -222,8 +222,14 @@ struct atdma_sg { * @vd: pointer to the virtual dma descriptor. * @atchan: pointer to the atmel dma channel. * @total_len: total transaction byte count - * @sg_len: number of sg entries. + * @sglen: number of sg entries. * @sg: array of sgs. + * @boundary: number of transfers to perform before the automatic address increment operation + * @dst_hole: value to add to the destination address when the boundary has been reached + * @src_hole: value to add to the source address when the boundary has been reached + * @memset_buffer: buffer used for the memset operation + * @memset_paddr: physical address of the buffer used for the memset operation + * @memset_vaddr: virtual address of the buffer used for the memset operation */ struct at_desc { struct virt_dma_desc vd; @@ -245,7 +251,10 @@ struct at_desc { /*-- Channels --------------------------------------------------------*/ /** - * atc_status - information bits stored in channel status flag + * enum atc_status - information bits stored in channel status flag + * + * @ATC_IS_PAUSED: If channel is pauses + * @ATC_IS_CYCLIC: If channel is cyclic * * Manipulated with atomic operations. */ @@ -282,7 +291,6 @@ struct at_dma_chan { u32 save_cfg; u32 save_dscr; struct dma_slave_config dma_sconfig; - bool cyclic; struct at_desc *desc; }; @@ -328,12 +336,12 @@ static inline u8 convert_buswidth(enum dma_slave_buswidth addr_width) /** * struct at_dma - internal representation of an Atmel HDMA Controller * @dma_device: dmaengine dma_device object members - * @atdma_devtype: identifier of DMA controller compatibility - * @ch_regs: memory mapped register base + * @regs: memory mapped register base * @clk: dma controller clock * @save_imr: interrupt mask register that is saved on suspend/resume cycle - * @all_chan_mask: all channels availlable in a mask + * @all_chan_mask: all channels available in a mask * @lli_pool: hw lli table + * @memset_pool: hw memset pool * @chan: channels table to store at_dma_chan structures */ struct at_dma { @@ -626,6 +634,9 @@ static inline u32 atc_calc_bytes_left(u32 current_len, u32 ctrla) /** * atc_get_llis_residue - Get residue for a hardware linked list transfer + * @atchan: pointer to an atmel hdmac channel. + * @desc: pointer to the descriptor for which the residue is calculated. + * @residue: residue to be set to dma_tx_state. * * Calculate the residue by removing the length of the Linked List Item (LLI) * already transferred from the total length. To get the current LLI we can use @@ -657,14 +668,12 @@ static inline u32 atc_calc_bytes_left(u32 current_len, u32 ctrla) * CTRLA is read in turn, next the DSCR is read a second time. If the two * consecutive read values of the DSCR are the same then we assume both refers * to the very same LLI as well as the CTRLA value read inbetween does. For - * cyclic tranfers, the assumption is that a full loop is "not so fast". If the + * cyclic transfers, the assumption is that a full loop is "not so fast". If the * two DSCR values are different, we read again the CTRLA then the DSCR till two * consecutive read values from DSCR are equal or till the maximum trials is * reach. This algorithm is very unlikely not to find a stable value for DSCR. - * @atchan: pointer to an atmel hdmac channel. - * @desc: pointer to the descriptor for which the residue is calculated. - * @residue: residue to be set to dma_tx_state. - * Returns 0 on success, -errno otherwise. + * + * Returns: %0 on success, -errno otherwise. */ static int atc_get_llis_residue(struct at_dma_chan *atchan, struct at_desc *desc, u32 *residue) @@ -691,7 +700,7 @@ static int atc_get_llis_residue(struct at_dma_chan *atchan, break; /* - * DSCR has changed inside the DMA controller, so the previouly + * DSCR has changed inside the DMA controller, so the previously * read value of CTRLA may refer to an already processed * descriptor hence could be outdated. We need to update ctrla * to match the current descriptor. @@ -731,7 +740,8 @@ static int atc_get_llis_residue(struct at_dma_chan *atchan, * @chan: DMA channel * @cookie: transaction identifier to check status of * @residue: residue to be updated. - * Return 0 on success, -errono otherwise. + * + * Return: %0 on success, -errno otherwise. */ static int atc_get_residue(struct dma_chan *chan, dma_cookie_t cookie, u32 *residue) @@ -1710,7 +1720,7 @@ static void atc_issue_pending(struct dma_chan *chan) * atc_alloc_chan_resources - allocate resources for DMA channel * @chan: allocate descriptor resources for this channel * - * return - the number of allocated descriptors + * Return: the number of allocated descriptors */ static int atc_alloc_chan_resources(struct dma_chan *chan) { @@ -2240,7 +2250,7 @@ static const struct dev_pm_ops __maybe_unused at_dma_dev_pm_ops = { }; static struct platform_driver at_dma_driver = { - .remove_new = at_dma_remove, + .remove = at_dma_remove, .shutdown = at_dma_shutdown, .id_table = atdma_devtypes, .driver = { |