diff options
Diffstat (limited to 'drivers/dma')
| -rw-r--r-- | drivers/dma/qcom/bam_dma.c | 90 |
1 files changed, 57 insertions, 33 deletions
diff --git a/drivers/dma/qcom/bam_dma.c b/drivers/dma/qcom/bam_dma.c index c8a77b428b52..87f6ca1541cf 100644 --- a/drivers/dma/qcom/bam_dma.c +++ b/drivers/dma/qcom/bam_dma.c @@ -388,6 +388,8 @@ struct bam_device { /* execution environment ID, from DT */ u32 ee; bool controlled_remotely; + bool powered_remotely; + u32 active_channels; const struct reg_offset_data *layout; @@ -416,6 +418,44 @@ static inline void __iomem *bam_addr(struct bam_device *bdev, u32 pipe, } /** + * bam_reset() - reset and initialize BAM registers + * @bdev: bam device + */ +static void bam_reset(struct bam_device *bdev) +{ + u32 val; + + /* s/w reset bam */ + /* after reset all pipes are disabled and idle */ + val = readl_relaxed(bam_addr(bdev, 0, BAM_CTRL)); + val |= BAM_SW_RST; + writel_relaxed(val, bam_addr(bdev, 0, BAM_CTRL)); + val &= ~BAM_SW_RST; + writel_relaxed(val, bam_addr(bdev, 0, BAM_CTRL)); + + /* make sure previous stores are visible before enabling BAM */ + wmb(); + + /* enable bam */ + val |= BAM_EN; + writel_relaxed(val, bam_addr(bdev, 0, BAM_CTRL)); + + /* set descriptor threshhold, start with 4 bytes */ + writel_relaxed(DEFAULT_CNT_THRSHLD, + bam_addr(bdev, 0, BAM_DESC_CNT_TRSHLD)); + + /* Enable default set of h/w workarounds, ie all except BAM_FULL_PIPE */ + writel_relaxed(BAM_CNFG_BITS_DEFAULT, bam_addr(bdev, 0, BAM_CNFG_BITS)); + + /* enable irqs for errors */ + writel_relaxed(BAM_ERROR_EN | BAM_HRESP_ERR_EN, + bam_addr(bdev, 0, BAM_IRQ_EN)); + + /* unmask global bam interrupt */ + writel_relaxed(BAM_IRQ_MSK, bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE)); +} + +/** * bam_reset_channel - Reset individual BAM DMA channel * @bchan: bam channel * @@ -512,6 +552,9 @@ static int bam_alloc_chan(struct dma_chan *chan) return -ENOMEM; } + if (bdev->active_channels++ == 0 && bdev->powered_remotely) + bam_reset(bdev); + return 0; } @@ -565,6 +608,13 @@ static void bam_free_chan(struct dma_chan *chan) /* disable irq */ writel_relaxed(0, bam_addr(bdev, bchan->id, BAM_P_IRQ_EN)); + if (--bdev->active_channels == 0 && bdev->powered_remotely) { + /* s/w reset bam */ + val = readl_relaxed(bam_addr(bdev, 0, BAM_CTRL)); + val |= BAM_SW_RST; + writel_relaxed(val, bam_addr(bdev, 0, BAM_CTRL)); + } + err: pm_runtime_mark_last_busy(bdev->dev); pm_runtime_put_autosuspend(bdev->dev); @@ -1164,37 +1214,9 @@ static int bam_init(struct bam_device *bdev) bdev->num_channels = val & BAM_NUM_PIPES_MASK; } - if (bdev->controlled_remotely) - return 0; - - /* s/w reset bam */ - /* after reset all pipes are disabled and idle */ - val = readl_relaxed(bam_addr(bdev, 0, BAM_CTRL)); - val |= BAM_SW_RST; - writel_relaxed(val, bam_addr(bdev, 0, BAM_CTRL)); - val &= ~BAM_SW_RST; - writel_relaxed(val, bam_addr(bdev, 0, BAM_CTRL)); - - /* make sure previous stores are visible before enabling BAM */ - wmb(); - - /* enable bam */ - val |= BAM_EN; - writel_relaxed(val, bam_addr(bdev, 0, BAM_CTRL)); - - /* set descriptor threshhold, start with 4 bytes */ - writel_relaxed(DEFAULT_CNT_THRSHLD, - bam_addr(bdev, 0, BAM_DESC_CNT_TRSHLD)); - - /* Enable default set of h/w workarounds, ie all except BAM_FULL_PIPE */ - writel_relaxed(BAM_CNFG_BITS_DEFAULT, bam_addr(bdev, 0, BAM_CNFG_BITS)); - - /* enable irqs for errors */ - writel_relaxed(BAM_ERROR_EN | BAM_HRESP_ERR_EN, - bam_addr(bdev, 0, BAM_IRQ_EN)); - - /* unmask global bam interrupt */ - writel_relaxed(BAM_IRQ_MSK, bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE)); + /* Reset BAM now if fully controlled locally */ + if (!bdev->controlled_remotely && !bdev->powered_remotely) + bam_reset(bdev); return 0; } @@ -1257,8 +1279,10 @@ static int bam_dma_probe(struct platform_device *pdev) bdev->controlled_remotely = of_property_read_bool(pdev->dev.of_node, "qcom,controlled-remotely"); + bdev->powered_remotely = of_property_read_bool(pdev->dev.of_node, + "qcom,powered-remotely"); - if (bdev->controlled_remotely) { + if (bdev->controlled_remotely || bdev->powered_remotely) { ret = of_property_read_u32(pdev->dev.of_node, "num-channels", &bdev->num_channels); if (ret) @@ -1270,7 +1294,7 @@ static int bam_dma_probe(struct platform_device *pdev) dev_err(bdev->dev, "num-ees unspecified in dt\n"); } - if (bdev->controlled_remotely) + if (bdev->controlled_remotely || bdev->powered_remotely) bdev->bamclk = devm_clk_get_optional(bdev->dev, "bam_clk"); else bdev->bamclk = devm_clk_get(bdev->dev, "bam_clk"); |