1 files changed, 93 insertions, 9 deletions

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 279541517a99..6240259b3a93 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -522,8 +522,9 @@ static void dm_dcn_crtc_high_irq(void *interrupt_params)
 
 	acrtc_state = to_dm_crtc_state(acrtc->base.state);
 
-	DRM_DEBUG_DRIVER("crtc:%d, vupdate-vrr:%d\n", acrtc->crtc_id,
-				amdgpu_dm_vrr_active(acrtc_state));
+	DRM_DEBUG_DRIVER("crtc:%d, vupdate-vrr:%d, planes:%d\n", acrtc->crtc_id,
+			 amdgpu_dm_vrr_active(acrtc_state),
+			 acrtc_state->active_planes);
 
 	amdgpu_dm_crtc_handle_crc_irq(&acrtc->base);
 	drm_crtc_handle_vblank(&acrtc->base);
@@ -543,7 +544,18 @@ static void dm_dcn_crtc_high_irq(void *interrupt_params)
 			&acrtc_state->vrr_params.adjust);
 	}
 
-	if (acrtc->pflip_status == AMDGPU_FLIP_SUBMITTED) {
+	/*
+	 * If there aren't any active_planes then DCH HUBP may be clock-gated.
+	 * In that case, pageflip completion interrupts won't fire and pageflip
+	 * completion events won't get delivered. Prevent this by sending
+	 * pending pageflip events from here if a flip is still pending.
+	 *
+	 * If any planes are enabled, use dm_pflip_high_irq() instead, to
+	 * avoid race conditions between flip programming and completion,
+	 * which could cause too early flip completion events.
+	 */
+	if (acrtc->pflip_status == AMDGPU_FLIP_SUBMITTED &&
+	    acrtc_state->active_planes == 0) {
 		if (acrtc->event) {
 			drm_crtc_send_vblank_event(&acrtc->base, acrtc->event);
 			acrtc->event = NULL;
@@ -1422,6 +1434,73 @@ static void s3_handle_mst(struct drm_device *dev, bool suspend)
 		drm_kms_helper_hotplug_event(dev);
 }
 
+static int amdgpu_dm_smu_write_watermarks_table(struct amdgpu_device *adev)
+{
+	struct smu_context *smu = &adev->smu;
+	int ret = 0;
+
+	if (!is_support_sw_smu(adev))
+		return 0;
+
+	/* This interface is for dGPU Navi1x.Linux dc-pplib interface depends
+	 * on window driver dc implementation.
+	 * For Navi1x, clock settings of dcn watermarks are fixed. the settings
+	 * should be passed to smu during boot up and resume from s3.
+	 * boot up: dc calculate dcn watermark clock settings within dc_create,
+	 * dcn20_resource_construct
+	 * then call pplib functions below to pass the settings to smu:
+	 * smu_set_watermarks_for_clock_ranges
+	 * smu_set_watermarks_table
+	 * navi10_set_watermarks_table
+	 * smu_write_watermarks_table
+	 *
+	 * For Renoir, clock settings of dcn watermark are also fixed values.
+	 * dc has implemented different flow for window driver:
+	 * dc_hardware_init / dc_set_power_state
+	 * dcn10_init_hw
+	 * notify_wm_ranges
+	 * set_wm_ranges
+	 * -- Linux
+	 * smu_set_watermarks_for_clock_ranges
+	 * renoir_set_watermarks_table
+	 * smu_write_watermarks_table
+	 *
+	 * For Linux,
+	 * dc_hardware_init -> amdgpu_dm_init
+	 * dc_set_power_state --> dm_resume
+	 *
+	 * therefore, this function apply to navi10/12/14 but not Renoir
+	 * *
+	 */
+	switch(adev->asic_type) {
+	case CHIP_NAVI10:
+	case CHIP_NAVI14:
+	case CHIP_NAVI12:
+		break;
+	default:
+		return 0;
+	}
+
+	mutex_lock(&smu->mutex);
+
+	/* pass data to smu controller */
+	if ((smu->watermarks_bitmap & WATERMARKS_EXIST) &&
+			!(smu->watermarks_bitmap & WATERMARKS_LOADED)) {
+		ret = smu_write_watermarks_table(smu);
+
+		if (ret) {
+			mutex_unlock(&smu->mutex);
+			DRM_ERROR("Failed to update WMTABLE!\n");
+			return ret;
+		}
+		smu->watermarks_bitmap |= WATERMARKS_LOADED;
+	}
+
+	mutex_unlock(&smu->mutex);
+
+	return 0;
+}
+
 /**
  * dm_hw_init() - Initialize DC device
  * @handle: The base driver device containing the amdgpu_dm device.
@@ -1700,6 +1779,8 @@ static int dm_resume(void *handle)
 
 	amdgpu_dm_irq_resume_late(adev);
 
+	amdgpu_dm_smu_write_watermarks_table(adev);
+
 	return 0;
 }
 
@@ -1911,7 +1992,7 @@ static void handle_hpd_irq(void *param)
 	mutex_lock(&aconnector->hpd_lock);
 
 #ifdef CONFIG_DRM_AMD_DC_HDCP
-	if (adev->asic_type >= CHIP_RAVEN)
+	if (adev->dm.hdcp_workqueue)
 		hdcp_reset_display(adev->dm.hdcp_workqueue, aconnector->dc_link->link_index);
 #endif
 	if (aconnector->fake_enable)
@@ -2088,8 +2169,10 @@ static void handle_hpd_rx_irq(void *param)
 		}
 	}
 #ifdef CONFIG_DRM_AMD_DC_HDCP
-	if (hpd_irq_data.bytes.device_service_irq.bits.CP_IRQ)
-		hdcp_handle_cpirq(adev->dm.hdcp_workqueue,  aconnector->base.index);
+	    if (hpd_irq_data.bytes.device_service_irq.bits.CP_IRQ) {
+		    if (adev->dm.hdcp_workqueue)
+			    hdcp_handle_cpirq(adev->dm.hdcp_workqueue,  aconnector->base.index);
+	    }
 #endif
 	if ((dc_link->cur_link_settings.lane_count != LANE_COUNT_UNKNOWN) ||
 	    (dc_link->type == dc_connection_mst_branch))
@@ -5702,7 +5785,7 @@ void amdgpu_dm_connector_init_helper(struct amdgpu_display_manager *dm,
 		drm_connector_attach_vrr_capable_property(
 			&aconnector->base);
 #ifdef CONFIG_DRM_AMD_DC_HDCP
-		if (adev->asic_type >= CHIP_RAVEN)
+		if (adev->dm.hdcp_workqueue)
 			drm_connector_attach_content_protection_property(&aconnector->base, true);
 #endif
 	}
@@ -8408,7 +8491,6 @@ bool amdgpu_dm_psr_enable(struct dc_stream_state *stream)
 	/* Calculate number of static frames before generating interrupt to
 	 * enter PSR.
 	 */
-	unsigned int frame_time_microsec = 1000000 / vsync_rate_hz;
 	// Init fail safe of 2 frames static
 	unsigned int num_frames_static = 2;
 
@@ -8423,8 +8505,10 @@ bool amdgpu_dm_psr_enable(struct dc_stream_state *stream)
 	 * Calculate number of frames such that at least 30 ms of time has
 	 * passed.
 	 */
-	if (vsync_rate_hz != 0)
+	if (vsync_rate_hz != 0) {
+		unsigned int frame_time_microsec = 1000000 / vsync_rate_hz;
 		num_frames_static = (30000 / frame_time_microsec) + 1;
+	}
 
 	params.triggers.cursor_update = true;
 	params.triggers.overlay_update = true;