diff options
Diffstat (limited to 'drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c')
-rw-r--r-- | drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 102 |
1 files changed, 93 insertions, 9 deletions
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 279541517a99..6240259b3a93 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -522,8 +522,9 @@ static void dm_dcn_crtc_high_irq(void *interrupt_params) acrtc_state = to_dm_crtc_state(acrtc->base.state); - DRM_DEBUG_DRIVER("crtc:%d, vupdate-vrr:%d\n", acrtc->crtc_id, - amdgpu_dm_vrr_active(acrtc_state)); + DRM_DEBUG_DRIVER("crtc:%d, vupdate-vrr:%d, planes:%d\n", acrtc->crtc_id, + amdgpu_dm_vrr_active(acrtc_state), + acrtc_state->active_planes); amdgpu_dm_crtc_handle_crc_irq(&acrtc->base); drm_crtc_handle_vblank(&acrtc->base); @@ -543,7 +544,18 @@ static void dm_dcn_crtc_high_irq(void *interrupt_params) &acrtc_state->vrr_params.adjust); } - if (acrtc->pflip_status == AMDGPU_FLIP_SUBMITTED) { + /* + * If there aren't any active_planes then DCH HUBP may be clock-gated. + * In that case, pageflip completion interrupts won't fire and pageflip + * completion events won't get delivered. Prevent this by sending + * pending pageflip events from here if a flip is still pending. + * + * If any planes are enabled, use dm_pflip_high_irq() instead, to + * avoid race conditions between flip programming and completion, + * which could cause too early flip completion events. + */ + if (acrtc->pflip_status == AMDGPU_FLIP_SUBMITTED && + acrtc_state->active_planes == 0) { if (acrtc->event) { drm_crtc_send_vblank_event(&acrtc->base, acrtc->event); acrtc->event = NULL; @@ -1422,6 +1434,73 @@ static void s3_handle_mst(struct drm_device *dev, bool suspend) drm_kms_helper_hotplug_event(dev); } +static int amdgpu_dm_smu_write_watermarks_table(struct amdgpu_device *adev) +{ + struct smu_context *smu = &adev->smu; + int ret = 0; + + if (!is_support_sw_smu(adev)) + return 0; + + /* This interface is for dGPU Navi1x.Linux dc-pplib interface depends + * on window driver dc implementation. + * For Navi1x, clock settings of dcn watermarks are fixed. the settings + * should be passed to smu during boot up and resume from s3. + * boot up: dc calculate dcn watermark clock settings within dc_create, + * dcn20_resource_construct + * then call pplib functions below to pass the settings to smu: + * smu_set_watermarks_for_clock_ranges + * smu_set_watermarks_table + * navi10_set_watermarks_table + * smu_write_watermarks_table + * + * For Renoir, clock settings of dcn watermark are also fixed values. + * dc has implemented different flow for window driver: + * dc_hardware_init / dc_set_power_state + * dcn10_init_hw + * notify_wm_ranges + * set_wm_ranges + * -- Linux + * smu_set_watermarks_for_clock_ranges + * renoir_set_watermarks_table + * smu_write_watermarks_table + * + * For Linux, + * dc_hardware_init -> amdgpu_dm_init + * dc_set_power_state --> dm_resume + * + * therefore, this function apply to navi10/12/14 but not Renoir + * * + */ + switch(adev->asic_type) { + case CHIP_NAVI10: + case CHIP_NAVI14: + case CHIP_NAVI12: + break; + default: + return 0; + } + + mutex_lock(&smu->mutex); + + /* pass data to smu controller */ + if ((smu->watermarks_bitmap & WATERMARKS_EXIST) && + !(smu->watermarks_bitmap & WATERMARKS_LOADED)) { + ret = smu_write_watermarks_table(smu); + + if (ret) { + mutex_unlock(&smu->mutex); + DRM_ERROR("Failed to update WMTABLE!\n"); + return ret; + } + smu->watermarks_bitmap |= WATERMARKS_LOADED; + } + + mutex_unlock(&smu->mutex); + + return 0; +} + /** * dm_hw_init() - Initialize DC device * @handle: The base driver device containing the amdgpu_dm device. @@ -1700,6 +1779,8 @@ static int dm_resume(void *handle) amdgpu_dm_irq_resume_late(adev); + amdgpu_dm_smu_write_watermarks_table(adev); + return 0; } @@ -1911,7 +1992,7 @@ static void handle_hpd_irq(void *param) mutex_lock(&aconnector->hpd_lock); #ifdef CONFIG_DRM_AMD_DC_HDCP - if (adev->asic_type >= CHIP_RAVEN) + if (adev->dm.hdcp_workqueue) hdcp_reset_display(adev->dm.hdcp_workqueue, aconnector->dc_link->link_index); #endif if (aconnector->fake_enable) @@ -2088,8 +2169,10 @@ static void handle_hpd_rx_irq(void *param) } } #ifdef CONFIG_DRM_AMD_DC_HDCP - if (hpd_irq_data.bytes.device_service_irq.bits.CP_IRQ) - hdcp_handle_cpirq(adev->dm.hdcp_workqueue, aconnector->base.index); + if (hpd_irq_data.bytes.device_service_irq.bits.CP_IRQ) { + if (adev->dm.hdcp_workqueue) + hdcp_handle_cpirq(adev->dm.hdcp_workqueue, aconnector->base.index); + } #endif if ((dc_link->cur_link_settings.lane_count != LANE_COUNT_UNKNOWN) || (dc_link->type == dc_connection_mst_branch)) @@ -5702,7 +5785,7 @@ void amdgpu_dm_connector_init_helper(struct amdgpu_display_manager *dm, drm_connector_attach_vrr_capable_property( &aconnector->base); #ifdef CONFIG_DRM_AMD_DC_HDCP - if (adev->asic_type >= CHIP_RAVEN) + if (adev->dm.hdcp_workqueue) drm_connector_attach_content_protection_property(&aconnector->base, true); #endif } @@ -8408,7 +8491,6 @@ bool amdgpu_dm_psr_enable(struct dc_stream_state *stream) /* Calculate number of static frames before generating interrupt to * enter PSR. */ - unsigned int frame_time_microsec = 1000000 / vsync_rate_hz; // Init fail safe of 2 frames static unsigned int num_frames_static = 2; @@ -8423,8 +8505,10 @@ bool amdgpu_dm_psr_enable(struct dc_stream_state *stream) * Calculate number of frames such that at least 30 ms of time has * passed. */ - if (vsync_rate_hz != 0) + if (vsync_rate_hz != 0) { + unsigned int frame_time_microsec = 1000000 / vsync_rate_hz; num_frames_static = (30000 / frame_time_microsec) + 1; + } params.triggers.cursor_update = true; params.triggers.overlay_update = true; |