diff options
Diffstat (limited to 'drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu_v14_0_0_ppsmc.h')
| -rw-r--r-- | drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu_v14_0_0_ppsmc.h | 143 |
1 files changed, 143 insertions, 0 deletions
diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu_v14_0_0_ppsmc.h b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu_v14_0_0_ppsmc.h new file mode 100644 index 000000000000..8a8a57c56bc0 --- /dev/null +++ b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu_v14_0_0_ppsmc.h @@ -0,0 +1,143 @@ +/* + * Copyright 2023 Advanced Micro Devices, Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + */ + +#ifndef __SMU_V14_0_0_PPSMC_H__ +#define __SMU_V14_0_0_PPSMC_H__ + +/*! @mainpage PMFW-PPS (PPLib) Message Interface + This documentation contains the subsections:\n\n + @ref ResponseCodes\n + @ref definitions\n + @ref enums\n +*/ + +/** @def PPS_PMFW_IF_VER +* PPS (PPLib) to PMFW IF version 1.0 +*/ +#define PPS_PMFW_IF_VER "1.0" ///< Major.Minor + +/** @defgroup ResponseCodes PMFW Response Codes +* @{ +*/ +// SMU Response Codes: +#define PPSMC_Result_OK 0x1 ///< Message Response OK +#define PPSMC_Result_Failed 0xFF ///< Message Response Failed +#define PPSMC_Result_UnknownCmd 0xFE ///< Message Response Unknown Command +#define PPSMC_Result_CmdRejectedPrereq 0xFD ///< Message Response Command Failed Prerequisite +#define PPSMC_Result_CmdRejectedBusy 0xFC ///< Message Response Command Rejected due to PMFW is busy. Sender should retry sending this message +/** @}*/ + +/** @defgroup definitions Message definitions +* @{ +*/ +// Message Definitions: +#define PPSMC_MSG_TestMessage 0x01 ///< To check if PMFW is alive and responding. Requirement specified by PMFW team +#define PPSMC_MSG_GetPmfwVersion 0x02 ///< Get PMFW version +#define PPSMC_MSG_GetDriverIfVersion 0x03 ///< Get PMFW_DRIVER_IF version +#define PPSMC_MSG_SPARE0 0x04 ///< SPARE +#define PPSMC_MSG_SPARE1 0x05 ///< SPARE +#define PPSMC_MSG_PowerDownVcn 0x06 ///< Power down VCN +#define PPSMC_MSG_PowerUpVcn 0x07 ///< Power up VCN; VCN is power gated by default +#define PPSMC_MSG_SetHardMinVcn 0x08 ///< For wireless display +#define PPSMC_MSG_SetSoftMinGfxclk 0x09 ///< Set SoftMin for GFXCLK, argument is frequency in MHz +#define PPSMC_MSG_SPARE2 0x0A ///< SPARE +#define PPSMC_MSG_SPARE3 0x0B ///< SPARE +#define PPSMC_MSG_PrepareMp1ForUnload 0x0C ///< Prepare PMFW for GFX driver unload +#define PPSMC_MSG_SetDriverDramAddrHigh 0x0D ///< Set high 32 bits of DRAM address for Driver table transfer +#define PPSMC_MSG_SetDriverDramAddrLow 0x0E ///< Set low 32 bits of DRAM address for Driver table transfer +#define PPSMC_MSG_TransferTableSmu2Dram 0x0F ///< Transfer driver interface table from PMFW SRAM to DRAM +#define PPSMC_MSG_TransferTableDram2Smu 0x10 ///< Transfer driver interface table from DRAM to PMFW SRAM +#define PPSMC_MSG_GfxDeviceDriverReset 0x11 ///< Request GFX mode 2 reset +#define PPSMC_MSG_GetEnabledSmuFeatures 0x12 ///< Get enabled features in PMFW +#define PPSMC_MSG_SetHardMinSocclkByFreq 0x13 ///< Set hard min for SOC CLK +#define PPSMC_MSG_SetSoftMinFclk 0x14 ///< Set hard min for FCLK +#define PPSMC_MSG_SetSoftMinVcn 0x15 ///< Set soft min for VCN clocks (VCLK and DCLK) + +#define PPSMC_MSG_EnableGfxImu 0x16 ///< Enable GFX IMU + +#define PPSMC_MSG_spare_0x17 0x17 +#define PPSMC_MSG_spare_0x18 0x18 +#define PPSMC_MSG_AllowGfxOff 0x19 ///< Inform PMFW of allowing GFXOFF entry +#define PPSMC_MSG_DisallowGfxOff 0x1A ///< Inform PMFW of disallowing GFXOFF entry +#define PPSMC_MSG_SetSoftMaxGfxClk 0x1B ///< Set soft max for GFX CLK +#define PPSMC_MSG_SetHardMinGfxClk 0x1C ///< Set hard min for GFX CLK + +#define PPSMC_MSG_SetSoftMaxSocclkByFreq 0x1D ///< Set soft max for SOC CLK +#define PPSMC_MSG_SetSoftMaxFclkByFreq 0x1E ///< Set soft max for FCLK +#define PPSMC_MSG_SetSoftMaxVcn 0x1F ///< Set soft max for VCN clocks (VCLK and DCLK) +#define PPSMC_MSG_spare_0x20 0x20 +#define PPSMC_MSG_PowerDownJpeg 0x21 ///< Power down Jpeg +#define PPSMC_MSG_PowerUpJpeg 0x22 ///< Power up Jpeg; VCN is power gated by default + +#define PPSMC_MSG_SetHardMinFclkByFreq 0x23 ///< Set hard min for FCLK +#define PPSMC_MSG_SetSoftMinSocclkByFreq 0x24 ///< Set soft min for SOC CLK +#define PPSMC_MSG_AllowZstates 0x25 ///< Inform PMFM of allowing Zstate entry, i.e. no Miracast activity +#define PPSMC_MSG_Reserved 0x26 ///< Not used +#define PPSMC_MSG_Reserved1 0x27 ///< Not used, previously PPSMC_MSG_RequestActiveWgp +#define PPSMC_MSG_Reserved2 0x28 ///< Not used, previously PPSMC_MSG_QueryActiveWgp +#define PPSMC_MSG_PowerDownIspByTile 0x29 ///< ISP is power gated by default +#define PPSMC_MSG_PowerUpIspByTile 0x2A ///< This message is used to power up ISP tiles and enable the ISP DPM +#define PPSMC_MSG_SetHardMinIspiclkByFreq 0x2B ///< Set HardMin by frequency for ISPICLK +#define PPSMC_MSG_SetHardMinIspxclkByFreq 0x2C ///< Set HardMin by frequency for ISPXCLK +#define PPSMC_MSG_PowerDownUmsch 0x2D ///< Power down VCN.UMSCH (aka VSCH) scheduler +#define PPSMC_MSG_PowerUpUmsch 0x2E ///< Power up VCN.UMSCH (aka VSCH) scheduler +#define PPSMC_Message_IspStutterOn_MmhubPgDis 0x2F ///< ISP StutterOn mmHub PgDis +#define PPSMC_Message_IspStutterOff_MmhubPgEn 0x30 ///< ISP StufferOff mmHub PgEn +#define PPSMC_MSG_PowerUpVpe 0x31 ///< Power up VPE +#define PPSMC_MSG_PowerDownVpe 0x32 ///< Power down VPE +#define PPSMC_MSG_GetVpeDpmTable 0x33 ///< Get VPE DPM table +#define PPSMC_MSG_EnableLSdma 0x34 ///< Enable LSDMA +#define PPSMC_MSG_DisableLSdma 0x35 ///< Disable LSDMA +#define PPSMC_MSG_SetSoftMaxVpe 0x36 ///< +#define PPSMC_MSG_SetSoftMinVpe 0x37 ///< +#define PPSMC_Message_Count 0x38 ///< Total number of PPSMC messages +/** @}*/ + +/** +* @defgroup enums Enum Definitions +* @{ +*/ + +/** @enum Mode_Reset_e +* Mode reset type, argument for PPSMC_MSG_GfxDeviceDriverReset +*/ +//argument for PPSMC_MSG_GfxDeviceDriverReset +typedef enum { + MODE1_RESET = 1, ///< Mode reset type 1 + MODE2_RESET = 2 ///< Mode reset type 2 +} Mode_Reset_e; + +/** @}*/ + +/** @enum ZStates_e +* Zstate types, argument for PPSMC_MSG_AllowZstates +*/ +//Argument for PPSMC_MSG_AllowZstates +typedef enum { + DISALLOW_ZSTATES = 0, ///< Disallow Zstates + ALLOW_ZSTATES_Z8 = 8, ///< Allows Z8 only + ALLOW_ZSTATES_Z9 = 9, ///< Allows Z9 and Z8 +} ZStates_e; + +/** @}*/ +#endif |