diff options
Diffstat (limited to 'drivers/gpu/drm/drm_modes.c')
| -rw-r--r-- | drivers/gpu/drm/drm_modes.c | 171 |
1 files changed, 106 insertions, 65 deletions
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c index cc352eed0191..8b410576fce4 100644 --- a/drivers/gpu/drm/drm_modes.c +++ b/drivers/gpu/drm/drm_modes.c @@ -63,9 +63,10 @@ EXPORT_SYMBOL(drm_mode_debug_printmodeline); * drm_mode_create - create a new display mode * @dev: DRM device * - * Create a new drm_display_mode, give it an ID, and return it. + * Create a new, cleared drm_display_mode with kzalloc, allocate an ID for it + * and return it. * - * RETURNS: + * Returns: * Pointer to new mode on success, NULL on error. */ struct drm_display_mode *drm_mode_create(struct drm_device *dev) @@ -90,7 +91,7 @@ EXPORT_SYMBOL(drm_mode_create); * @dev: DRM device * @mode: mode to remove * - * Free @mode's unique identifier, then free it. + * Release @mode's unique ID, then free it @mode structure itself using kfree. */ void drm_mode_destroy(struct drm_device *dev, struct drm_display_mode *mode) { @@ -104,11 +105,13 @@ void drm_mode_destroy(struct drm_device *dev, struct drm_display_mode *mode) EXPORT_SYMBOL(drm_mode_destroy); /** - * drm_mode_probed_add - add a mode to a connector's probed mode list + * drm_mode_probed_add - add a mode to a connector's probed_mode list * @connector: connector the new mode * @mode: mode data * - * Add @mode to @connector's mode list for later use. + * Add @mode to @connector's probed_mode list for later use. This list should + * then in a second step get filtered and all the modes actually supported by + * the hardware moved to the @connector's modes list. */ void drm_mode_probed_add(struct drm_connector *connector, struct drm_display_mode *mode) @@ -120,16 +123,14 @@ void drm_mode_probed_add(struct drm_connector *connector, EXPORT_SYMBOL(drm_mode_probed_add); /** - * drm_cvt_mode -create a modeline based on CVT algorithm - * @dev: DRM device + * drm_cvt_mode -create a modeline based on the CVT algorithm + * @dev: drm device * @hdisplay: hdisplay size * @vdisplay: vdisplay size - * @vrefresh : vrefresh rate - * @reduced : Whether the GTF calculation is simplified - * @interlaced:Whether the interlace is supported - * @margins: whether to add margins or not - * - * return the modeline based on CVT algorithm + * @vrefresh: vrefresh rate + * @reduced: whether to use reduced blanking + * @interlaced: whether to compute an interlaced mode + * @margins: whether to add margins (borders) * * This function is called to generate the modeline based on CVT algorithm * according to the hdisplay, vdisplay, vrefresh. @@ -139,6 +140,11 @@ EXPORT_SYMBOL(drm_mode_probed_add); * * And it is copied from xf86CVTmode in xserver/hw/xfree86/modes/xf86cvt.c. * What I have done is to translate it by using integer calculation. + * + * Returns: + * The modeline based on the CVT algorithm stored in a drm_display_mode object. + * The display mode object is allocated with drm_mode_create(). Returns NULL + * when no mode could be allocated. */ struct drm_display_mode *drm_cvt_mode(struct drm_device *dev, int hdisplay, int vdisplay, int vrefresh, @@ -338,23 +344,25 @@ struct drm_display_mode *drm_cvt_mode(struct drm_device *dev, int hdisplay, EXPORT_SYMBOL(drm_cvt_mode); /** - * drm_gtf_mode_complex - create the modeline based on full GTF algorithm - * - * @dev :drm device - * @hdisplay :hdisplay size - * @vdisplay :vdisplay size - * @vrefresh :vrefresh rate. - * @interlaced :whether the interlace is supported - * @margins :desired margin size + * drm_gtf_mode_complex - create the modeline based on the full GTF algorithm + * @dev: drm device + * @hdisplay: hdisplay size + * @vdisplay: vdisplay size + * @vrefresh: vrefresh rate. + * @interlaced: whether to compute an interlaced mode + * @margins: desired margin (borders) size * @GTF_M: extended GTF formula parameters * @GTF_2C: extended GTF formula parameters * @GTF_K: extended GTF formula parameters * @GTF_2J: extended GTF formula parameters * - * return the modeline based on full GTF algorithm. - * * GTF feature blocks specify C and J in multiples of 0.5, so we pass them * in here multiplied by two. For a C of 40, pass in 80. + * + * Returns: + * The modeline based on the full GTF algorithm stored in a drm_display_mode object. + * The display mode object is allocated with drm_mode_create(). Returns NULL + * when no mode could be allocated. */ struct drm_display_mode * drm_gtf_mode_complex(struct drm_device *dev, int hdisplay, int vdisplay, @@ -524,14 +532,13 @@ drm_gtf_mode_complex(struct drm_device *dev, int hdisplay, int vdisplay, EXPORT_SYMBOL(drm_gtf_mode_complex); /** - * drm_gtf_mode - create the modeline based on GTF algorithm - * - * @dev :drm device - * @hdisplay :hdisplay size - * @vdisplay :vdisplay size - * @vrefresh :vrefresh rate. - * @interlaced :whether the interlace is supported - * @margins :whether the margin is supported + * drm_gtf_mode - create the modeline based on the GTF algorithm + * @dev: drm device + * @hdisplay: hdisplay size + * @vdisplay: vdisplay size + * @vrefresh: vrefresh rate. + * @interlaced: whether to compute an interlaced mode + * @margins: desired margin (borders) size * * return the modeline based on GTF algorithm * @@ -550,6 +557,11 @@ EXPORT_SYMBOL(drm_gtf_mode_complex); * C = 40 * K = 128 * J = 20 + * + * Returns: + * The modeline based on the GTF algorithm stored in a drm_display_mode object. + * The display mode object is allocated with drm_mode_create(). Returns NULL + * when no mode could be allocated. */ struct drm_display_mode * drm_gtf_mode(struct drm_device *dev, int hdisplay, int vdisplay, int vrefresh, @@ -562,6 +574,13 @@ drm_gtf_mode(struct drm_device *dev, int hdisplay, int vdisplay, int vrefresh, EXPORT_SYMBOL(drm_gtf_mode); #ifdef CONFIG_VIDEOMODE_HELPERS +/** + * drm_display_mode_from_videomode - fill in @dmode using @vm, + * @vm: videomode structure to use as source + * @dmode: drm_display_mode structure to use as destination + * + * Fills out @dmode using the display mode specified in @vm. + */ void drm_display_mode_from_videomode(const struct videomode *vm, struct drm_display_mode *dmode) { @@ -606,6 +625,9 @@ EXPORT_SYMBOL_GPL(drm_display_mode_from_videomode); * This function is expensive and should only be used, if only one mode is to be * read from DT. To get multiple modes start with of_get_display_timings and * work with that instead. + * + * Returns: + * 0 on success, a negative errno code when no of videomode node was found. */ int of_get_drm_display_mode(struct device_node *np, struct drm_display_mode *dmode, int index) @@ -633,7 +655,8 @@ EXPORT_SYMBOL_GPL(of_get_drm_display_mode); * drm_mode_set_name - set the name on a mode * @mode: name will be set in this mode * - * Set the name of @mode to a standard format. + * Set the name of @mode to a standard format which is <hdisplay>x<vdisplay> + * with an optional 'i' suffix for interlaced modes. */ void drm_mode_set_name(struct drm_display_mode *mode) { @@ -648,7 +671,9 @@ EXPORT_SYMBOL(drm_mode_set_name); /** drm_mode_hsync - get the hsync of a mode * @mode: mode * - * Return @modes's hsync rate in kHz, rounded to the nearest int. + * Returns: + * @modes's hsync rate in kHz, rounded to the nearest integer. Calculates the + * value first if it is not yet set. */ int drm_mode_hsync(const struct drm_display_mode *mode) { @@ -672,14 +697,9 @@ EXPORT_SYMBOL(drm_mode_hsync); * drm_mode_vrefresh - get the vrefresh of a mode * @mode: mode * - * Return @mode's vrefresh rate in Hz or calculate it if necessary. - * - * FIXME: why is this needed? shouldn't vrefresh be set already? - * - * RETURNS: - * Vertical refresh rate. It will be the result of actual value plus 0.5. - * If it is 70.288, it will return 70Hz. - * If it is 59.6, it will return 60Hz. + * Returns: + * @modes's vrefresh rate in Hz, rounded to the nearest integer. Calculates the + * value first if it is not yet set. */ int drm_mode_vrefresh(const struct drm_display_mode *mode) { @@ -708,11 +728,11 @@ int drm_mode_vrefresh(const struct drm_display_mode *mode) EXPORT_SYMBOL(drm_mode_vrefresh); /** - * drm_mode_set_crtcinfo - set CRTC modesetting parameters + * drm_mode_set_crtcinfo - set CRTC modesetting timing parameters * @p: mode * @adjust_flags: a combination of adjustment flags * - * Setup the CRTC modesetting parameters for @p, adjusting if necessary. + * Setup the CRTC modesetting timing parameters for @p, adjusting if necessary. * * - The CRTC_INTERLACE_HALVE_V flag can be used to halve vertical timings of * interlaced modes. @@ -780,7 +800,6 @@ void drm_mode_set_crtcinfo(struct drm_display_mode *p, int adjust_flags) } EXPORT_SYMBOL(drm_mode_set_crtcinfo); - /** * drm_mode_copy - copy the mode * @dst: mode to overwrite @@ -807,6 +826,9 @@ EXPORT_SYMBOL(drm_mode_copy); * * Just allocate a new mode, copy the existing mode into it, and return * a pointer to it. Used to create new instances of established modes. + * + * Returns: + * Pointer to duplicated mode on success, NULL on error. */ struct drm_display_mode *drm_mode_duplicate(struct drm_device *dev, const struct drm_display_mode *mode) @@ -830,7 +852,7 @@ EXPORT_SYMBOL(drm_mode_duplicate); * * Check to see if @mode1 and @mode2 are equivalent. * - * RETURNS: + * Returns: * True if the modes are equal, false otherwise. */ bool drm_mode_equal(const struct drm_display_mode *mode1, const struct drm_display_mode *mode2) @@ -859,7 +881,7 @@ EXPORT_SYMBOL(drm_mode_equal); * Check to see if @mode1 and @mode2 are equivalent, but * don't check the pixel clocks nor the stereo layout. * - * RETURNS: + * Returns: * True if the modes are equal, false otherwise. */ bool drm_mode_equal_no_clocks_no_stereo(const struct drm_display_mode *mode1, @@ -890,9 +912,10 @@ EXPORT_SYMBOL(drm_mode_equal_no_clocks_no_stereo); * @maxX: maximum width * @maxY: maximum height * - * The DRM device (@dev) has size and pitch limits. Here we validate the - * modes we probed for @dev against those limits and set their status as - * necessary. + * This function is a helper which can be used to validate modes against size + * limitations of the DRM device/connector. If a mode is too big its status + * memeber is updated with the appropriate validation failure code. The list + * itself is not changed. */ void drm_mode_validate_size(struct drm_device *dev, struct list_head *mode_list, @@ -916,9 +939,10 @@ EXPORT_SYMBOL(drm_mode_validate_size); * @mode_list: list of modes to check * @verbose: be verbose about it * - * Once mode list generation is complete, a caller can use this routine to - * remove invalid modes from a mode list. If any of the modes have a - * status other than %MODE_OK, they are removed from @mode_list and freed. + * This helper function can be used to prune a display mode list after + * validation has been completed. All modes who's status is not MODE_OK will be + * removed from the list, and if @verbose the status code and mode name is also + * printed to dmesg. */ void drm_mode_prune_invalid(struct drm_device *dev, struct list_head *mode_list, bool verbose) @@ -948,7 +972,7 @@ EXPORT_SYMBOL(drm_mode_prune_invalid); * Compare two modes, given by @lh_a and @lh_b, returning a value indicating * which is better. * - * RETURNS: + * Returns: * Negative if @lh_a is better than @lh_b, zero if they're equivalent, or * positive if @lh_b is better than @lh_a. */ @@ -976,9 +1000,9 @@ static int drm_mode_compare(void *priv, struct list_head *lh_a, struct list_head /** * drm_mode_sort - sort mode list - * @mode_list: list to sort + * @mode_list: list of drm_display_mode structures to sort * - * Sort @mode_list by favorability, putting good modes first. + * Sort @mode_list by favorability, moving good modes to the head of the list. */ void drm_mode_sort(struct list_head *mode_list) { @@ -992,8 +1016,10 @@ EXPORT_SYMBOL(drm_mode_sort); * * This moves the modes from the @connector probed_modes list * to the actual mode list. It compares the probed mode against the current - * list and only adds different modes. All modes unverified after this point - * will be removed by the prune invalid modes. + * list and only adds different/new modes. + * + * This is just a helper functions doesn't validate any modes itself and also + * doesn't prune any invalid modes. Callers need to do that themselves. */ void drm_mode_connector_list_update(struct drm_connector *connector) { @@ -1028,18 +1054,25 @@ void drm_mode_connector_list_update(struct drm_connector *connector) EXPORT_SYMBOL(drm_mode_connector_list_update); /** - * drm_mode_parse_command_line_for_connector - parse command line for connector - * @mode_option: per connector mode option - * @connector: connector to parse line for - * @mode: preallocated mode structure to fill out + * drm_mode_parse_command_line_for_connector - parse command line modeline for connector + * @mode_option: optional per connector mode option + * @connector: connector to parse modeline for + * @mode: preallocated drm_cmdline_mode structure to fill out + * + * This parses @mode_option command line modeline for modes and options to + * configure the connector. If @mode_option is NULL the default command line + * modeline in fb_mode_option will be parsed instead. * - * This parses the connector specific then generic command lines for - * modes and options to configure the connector. + * This uses the same parameters as the fb modedb.c, except for an extra + * force-enable, force-enable-digital and force-disable bit at the end: * - * This uses the same parameters as the fb modedb.c, except for extra * <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd] * - * enable/enable Digital/disable bit at the end + * The intermediate drm_cmdline_mode structure is required to store additional + * options from the command line modline like the force-enabel/disable flag. + * + * Returns: + * True if a valid modeline has been parsed, false otherwise. */ bool drm_mode_parse_command_line_for_connector(const char *mode_option, struct drm_connector *connector, @@ -1192,6 +1225,14 @@ done: } EXPORT_SYMBOL(drm_mode_parse_command_line_for_connector); +/** + * drm_mode_create_from_cmdline_mode - convert a command line modeline into a DRM display mode + * @dev: DRM device to create the new mode for + * @cmd: input command line modeline + * + * Returns: + * Pointer to converted mode on success, NULL on error. + */ struct drm_display_mode * drm_mode_create_from_cmdline_mode(struct drm_device *dev, struct drm_cmdline_mode *cmd) |