diff options
Diffstat (limited to 'drivers/gpu/drm/drm_probe_helper.c')
| -rw-r--r-- | drivers/gpu/drm/drm_probe_helper.c | 184 |
1 files changed, 108 insertions, 76 deletions
diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c index 23b4e9a3361d..96b266b37ba4 100644 --- a/drivers/gpu/drm/drm_probe_helper.c +++ b/drivers/gpu/drm/drm_probe_helper.c @@ -33,10 +33,11 @@ #include <linux/moduleparam.h> #include <drm/drm_bridge.h> -#include <drm/drm_client.h> +#include <drm/drm_client_event.h> #include <drm/drm_crtc.h> #include <drm/drm_edid.h> #include <drm/drm_fourcc.h> +#include <drm/drm_managed.h> #include <drm/drm_modeset_helper_vtables.h> #include <drm/drm_print.h> #include <drm/drm_probe_helper.h> @@ -293,14 +294,17 @@ static void reschedule_output_poll_work(struct drm_device *dev) * Drivers can call this helper from their device resume implementation. It is * not an error to call this even when output polling isn't enabled. * + * If device polling was never initialized before, this call will trigger a + * warning and return. + * * Note that calls to enable and disable polling must be strictly ordered, which * is automatically the case when they're only call from suspend/resume * callbacks. */ void drm_kms_helper_poll_enable(struct drm_device *dev) { - if (!dev->mode_config.poll_enabled || !drm_kms_helper_poll || - dev->mode_config.poll_running) + if (drm_WARN_ON_ONCE(dev, !dev->mode_config.poll_enabled) || + !drm_kms_helper_poll || dev->mode_config.poll_running) return; if (drm_kms_helper_enable_hpd(dev) || @@ -419,6 +423,13 @@ static int drm_helper_probe_get_modes(struct drm_connector *connector) count = connector_funcs->get_modes(connector); + /* The .get_modes() callback should not return negative values. */ + if (count < 0) { + drm_err(connector->dev, ".get_modes() returned %pe\n", + ERR_PTR(count)); + count = 0; + } + /* * Fallback for when DDC probe failed in drm_get_edid() and thus skipped * override/firmware EDID. @@ -463,6 +474,10 @@ static int __drm_helper_update_and_validate(struct drm_connector *connector, if (mode->status != MODE_OK) continue; + mode->status = drm_mode_validate_ycbcr420(mode, connector); + if (mode->status != MODE_OK) + continue; + ret = drm_mode_validate_pipeline(mode, connector, ctx, &mode->status); if (ret) { @@ -475,10 +490,6 @@ static int __drm_helper_update_and_validate(struct drm_connector *connector, else return -EDEADLK; } - - if (mode->status != MODE_OK) - continue; - mode->status = drm_mode_validate_ycbcr420(mode, connector); } return 0; @@ -556,8 +567,8 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector, drm_modeset_acquire_init(&ctx, 0); - DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", connector->base.id, - connector->name); + drm_dbg_kms(dev, "[CONNECTOR:%d:%s]\n", connector->base.id, + connector->name); retry: ret = drm_modeset_lock(&dev->mode_config.connection_mutex, &ctx); @@ -600,11 +611,10 @@ retry: * check here, and if anything changed start the hotplug code. */ if (old_status != connector->status) { - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %s to %s\n", - connector->base.id, - connector->name, - drm_get_connector_status_name(old_status), - drm_get_connector_status_name(connector->status)); + drm_dbg_kms(dev, "[CONNECTOR:%d:%s] status updated from %s to %s\n", + connector->base.id, connector->name, + drm_get_connector_status_name(old_status), + drm_get_connector_status_name(connector->status)); /* * The hotplug event code might call into the fb @@ -619,12 +629,16 @@ retry: 0); } - /* Re-enable polling in case the global poll config changed. */ - drm_kms_helper_poll_enable(dev); + /* + * Re-enable polling in case the global poll config changed but polling + * is still initialized. + */ + if (dev->mode_config.poll_enabled) + drm_kms_helper_poll_enable(dev); if (connector->status == connector_status_disconnected) { - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] disconnected\n", - connector->base.id, connector->name); + drm_dbg_kms(dev, "[CONNECTOR:%d:%s] disconnected\n", + connector->base.id, connector->name); drm_connector_update_edid_property(connector, NULL); drm_mode_prune_invalid(dev, &connector->modes, false); goto exit; @@ -682,11 +696,13 @@ exit: drm_mode_sort(&connector->modes); - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] probed modes :\n", connector->base.id, - connector->name); + drm_dbg_kms(dev, "[CONNECTOR:%d:%s] probed modes:\n", + connector->base.id, connector->name); + list_for_each_entry(mode, &connector->modes, head) { drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V); - drm_mode_debug_printmodeline(mode); + drm_dbg_kms(dev, "Probed mode: " DRM_MODE_FMT "\n", + DRM_MODE_ARG(mode)); } return count; @@ -698,7 +714,7 @@ EXPORT_SYMBOL(drm_helper_probe_single_connector_modes); * @dev: drm_device whose connector state changed * * This function fires off the uevent for userspace and also calls the - * output_poll_changed function, which is most commonly used to inform the fbdev + * client hotplug function, which is most commonly used to inform the fbdev * emulation code and allow it to update the fbcon output configuration. * * Drivers should call this from their hotplug handling code when a change is @@ -714,11 +730,7 @@ EXPORT_SYMBOL(drm_helper_probe_single_connector_modes); */ void drm_kms_helper_hotplug_event(struct drm_device *dev) { - /* send a uevent + call fbdev */ drm_sysfs_hotplug_event(dev); - if (dev->mode_config.funcs->output_poll_changed) - dev->mode_config.funcs->output_poll_changed(dev); - drm_client_dev_hotplug(dev); } EXPORT_SYMBOL(drm_kms_helper_hotplug_event); @@ -734,11 +746,7 @@ void drm_kms_helper_connector_hotplug_event(struct drm_connector *connector) { struct drm_device *dev = connector->dev; - /* send a uevent + call fbdev */ drm_sysfs_connector_hotplug_event(connector); - if (dev->mode_config.funcs->output_poll_changed) - dev->mode_config.funcs->output_poll_changed(dev); - drm_client_dev_hotplug(dev); } EXPORT_SYMBOL(drm_kms_helper_connector_hotplug_event); @@ -819,14 +827,12 @@ static void output_poll_execute(struct work_struct *work) old = drm_get_connector_status_name(old_status); new = drm_get_connector_status_name(connector->status); - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] " - "status updated from %s to %s\n", - connector->base.id, - connector->name, - old, new); - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] epoch counter %llu -> %llu\n", - connector->base.id, connector->name, - old_epoch_counter, connector->epoch_counter); + drm_dbg_kms(dev, "[CONNECTOR:%d:%s] status updated from %s to %s\n", + connector->base.id, connector->name, + old, new); + drm_dbg_kms(dev, "[CONNECTOR:%d:%s] epoch counter %llu -> %llu\n", + connector->base.id, connector->name, + old_epoch_counter, connector->epoch_counter); changed = true; } @@ -873,12 +879,18 @@ EXPORT_SYMBOL(drm_kms_helper_is_poll_worker); * not an error to call this even when output polling isn't enabled or already * disabled. Polling is re-enabled by calling drm_kms_helper_poll_enable(). * + * If however, the polling was never initialized, this call will trigger a + * warning and return. + * * Note that calls to enable and disable polling must be strictly ordered, which * is automatically the case when they're only call from suspend/resume * callbacks. */ void drm_kms_helper_poll_disable(struct drm_device *dev) { + if (drm_WARN_ON(dev, !dev->mode_config.poll_enabled)) + return; + if (dev->mode_config.poll_running) drm_kms_helper_disable_hpd(dev); @@ -931,6 +943,32 @@ void drm_kms_helper_poll_fini(struct drm_device *dev) } EXPORT_SYMBOL(drm_kms_helper_poll_fini); +static void drm_kms_helper_poll_init_release(struct drm_device *dev, void *res) +{ + drm_kms_helper_poll_fini(dev); +} + +/** + * drmm_kms_helper_poll_init - initialize and enable output polling + * @dev: drm_device + * + * This function initializes and then also enables output polling support for + * @dev similar to drm_kms_helper_poll_init(). Polling will automatically be + * cleaned up when the DRM device goes away. + * + * See drm_kms_helper_poll_init() for more information. + * + * Returns: + * 0 on success, or a negative errno code otherwise. + */ +int drmm_kms_helper_poll_init(struct drm_device *dev) +{ + drm_kms_helper_poll_init(dev); + + return drmm_add_action_or_reset(dev, drm_kms_helper_poll_init_release, dev); +} +EXPORT_SYMBOL(drmm_kms_helper_poll_init); + static bool check_connector_changed(struct drm_connector *connector) { struct drm_device *dev = connector->dev; @@ -1103,42 +1141,6 @@ enum drm_mode_status drm_crtc_helper_mode_valid_fixed(struct drm_crtc *crtc, EXPORT_SYMBOL(drm_crtc_helper_mode_valid_fixed); /** - * drm_connector_helper_get_modes_from_ddc - Updates the connector's EDID - * property from the connector's - * DDC channel - * @connector: The connector - * - * Returns: - * The number of detected display modes. - * - * Uses a connector's DDC channel to retrieve EDID data and update the - * connector's EDID property and display modes. Drivers can use this - * function to implement struct &drm_connector_helper_funcs.get_modes - * for connectors with a DDC channel. - */ -int drm_connector_helper_get_modes_from_ddc(struct drm_connector *connector) -{ - struct edid *edid; - int count = 0; - - if (!connector->ddc) - return 0; - - edid = drm_get_edid(connector, connector->ddc); - - // clears property if EDID is NULL - drm_connector_update_edid_property(connector, edid); - - if (edid) { - count = drm_add_edid_modes(connector, edid); - kfree(edid); - } - - return count; -} -EXPORT_SYMBOL(drm_connector_helper_get_modes_from_ddc); - -/** * drm_connector_helper_get_modes_fixed - Duplicates a display mode for a connector * @connector: the connector * @fixed_mode: the display hardware's mode @@ -1249,8 +1251,9 @@ int drm_connector_helper_tv_get_modes(struct drm_connector *connector) for (i = 0; i < tv_mode_property->num_values; i++) supported_tv_modes |= BIT(tv_mode_property->values[i]); - if ((supported_tv_modes & ntsc_modes) && - (supported_tv_modes & pal_modes)) { + if (((supported_tv_modes & ntsc_modes) && + (supported_tv_modes & pal_modes)) || + (supported_tv_modes & BIT(DRM_MODE_TV_MODE_MONOCHROME))) { uint64_t default_mode; if (drm_object_property_get_default_value(&connector->base, @@ -1295,3 +1298,32 @@ int drm_connector_helper_tv_get_modes(struct drm_connector *connector) return i; } EXPORT_SYMBOL(drm_connector_helper_tv_get_modes); + +/** + * drm_connector_helper_detect_from_ddc - Read EDID and detect connector status. + * @connector: The connector + * @ctx: Acquire context + * @force: Perform screen-destructive operations, if necessary + * + * Detects the connector status by reading the EDID using drm_probe_ddc(), + * which requires connector->ddc to be set. Returns connector_status_connected + * on success or connector_status_disconnected on failure. + * + * Returns: + * The connector status as defined by enum drm_connector_status. + */ +int drm_connector_helper_detect_from_ddc(struct drm_connector *connector, + struct drm_modeset_acquire_ctx *ctx, + bool force) +{ + struct i2c_adapter *ddc = connector->ddc; + + if (!ddc) + return connector_status_unknown; + + if (drm_probe_ddc(ddc)) + return connector_status_connected; + + return connector_status_disconnected; +} +EXPORT_SYMBOL(drm_connector_helper_detect_from_ddc); |