summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/intel_dp.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpu/drm/i915/intel_dp.c')
-rw-r--r--drivers/gpu/drm/i915/intel_dp.c69
1 files changed, 10 insertions, 59 deletions
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index cf709835fb9a..8891f29a8c7f 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1859,42 +1859,6 @@ intel_dp_compute_link_config_wide(struct intel_dp *intel_dp,
return -EINVAL;
}
-/* Optimize link config in order: max bpp, min lanes, min clock */
-static int
-intel_dp_compute_link_config_fast(struct intel_dp *intel_dp,
- struct intel_crtc_state *pipe_config,
- const struct link_config_limits *limits)
-{
- struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
- int bpp, clock, lane_count;
- int mode_rate, link_clock, link_avail;
-
- for (bpp = limits->max_bpp; bpp >= limits->min_bpp; bpp -= 2 * 3) {
- mode_rate = intel_dp_link_required(adjusted_mode->crtc_clock,
- bpp);
-
- for (lane_count = limits->min_lane_count;
- lane_count <= limits->max_lane_count;
- lane_count <<= 1) {
- for (clock = limits->min_clock; clock <= limits->max_clock; clock++) {
- link_clock = intel_dp->common_rates[clock];
- link_avail = intel_dp_max_data_rate(link_clock,
- lane_count);
-
- if (mode_rate <= link_avail) {
- pipe_config->lane_count = lane_count;
- pipe_config->pipe_bpp = bpp;
- pipe_config->port_clock = link_clock;
-
- return 0;
- }
- }
- }
- }
-
- return -EINVAL;
-}
-
static int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp, u8 dsc_max_bpc)
{
int i, num_bpc;
@@ -2031,15 +1995,13 @@ intel_dp_compute_link_config(struct intel_encoder *encoder,
limits.min_bpp = 6 * 3;
limits.max_bpp = intel_dp_compute_bpp(intel_dp, pipe_config);
- if (intel_dp_is_edp(intel_dp) && intel_dp->edp_dpcd[0] < DP_EDP_14) {
+ if (intel_dp_is_edp(intel_dp)) {
/*
* Use the maximum clock and number of lanes the eDP panel
- * advertizes being capable of. The eDP 1.3 and earlier panels
- * are generally designed to support only a single clock and
- * lane configuration, and typically these values correspond to
- * the native resolution of the panel. With eDP 1.4 rate select
- * and DSC, this is decreasingly the case, and we need to be
- * able to select less than maximum link config.
+ * advertizes being capable of. The panels are generally
+ * designed to support only a single clock and lane
+ * configuration, and typically these values correspond to the
+ * native resolution of the panel.
*/
limits.min_lane_count = limits.max_lane_count;
limits.min_clock = limits.max_clock;
@@ -2053,22 +2015,11 @@ intel_dp_compute_link_config(struct intel_encoder *encoder,
intel_dp->common_rates[limits.max_clock],
limits.max_bpp, adjusted_mode->crtc_clock);
- if (intel_dp_is_edp(intel_dp))
- /*
- * Optimize for fast and narrow. eDP 1.3 section 3.3 and eDP 1.4
- * section A.1: "It is recommended that the minimum number of
- * lanes be used, using the minimum link rate allowed for that
- * lane configuration."
- *
- * Note that we use the max clock and lane count for eDP 1.3 and
- * earlier, and fast vs. wide is irrelevant.
- */
- ret = intel_dp_compute_link_config_fast(intel_dp, pipe_config,
- &limits);
- else
- /* Optimize for slow and wide. */
- ret = intel_dp_compute_link_config_wide(intel_dp, pipe_config,
- &limits);
+ /*
+ * Optimize for slow and wide. This is the place to add alternative
+ * optimization policy.
+ */
+ ret = intel_dp_compute_link_config_wide(intel_dp, pipe_config, &limits);
/* enable compression if the mode doesn't fit available BW */
DRM_DEBUG_KMS("Force DSC en = %d\n", intel_dp->force_dsc_en);