diff options
Diffstat (limited to 'drivers/gpu/drm/panel/Kconfig')
| -rw-r--r-- | drivers/gpu/drm/panel/Kconfig | 336 |
1 files changed, 238 insertions, 98 deletions
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index 8f3783742208..d7469c565d1d 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -67,61 +67,34 @@ config DRM_PANEL_BOE_HIMAX8279D 24 bit RGB per pixel. It provides a MIPI DSI interface to the host and has a built-in LED backlight. -config DRM_PANEL_BOE_TV101WUM_NL6 - tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel" +config DRM_PANEL_BOE_TH101MB31UIG002_28A + tristate "Boe TH101MB31UIG002-28A panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help - Say Y here if you want to support for BOE TV101WUM and AUO KD101N80 - 45NA WUXGA PANEL DSI Video Mode panel + Say Y here if you want to enable support for Boe + TH101MB31UIG002-28A TFT-LCD modules. The panel has a 800x1280 + resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI + interface to the host and has a built-in LED backlight. -config DRM_PANEL_DSI_CM - tristate "Generic DSI command mode panels" +config DRM_PANEL_BOE_TV101WUM_NL6 + tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help - DRM panel driver for DSI command mode panels with support for - embedded and external backlights. - -config DRM_PANEL_LVDS - tristate "Generic LVDS panel driver" - depends on OF - depends on BACKLIGHT_CLASS_DEVICE - select VIDEOMODE_HELPERS - help - This driver supports LVDS panels that don't require device-specific - handling of power supplies or control signals. It implements automatic - backlight handling if the panel is attached to a backlight controller. + Say Y here if you want to support for BOE TV101WUM and AUO KD101N80 + 45NA WUXGA PANEL DSI Video Mode panel -config DRM_PANEL_SIMPLE - tristate "support for simple panels (other than eDP ones)" - depends on OF - depends on BACKLIGHT_CLASS_DEVICE - depends on PM - select VIDEOMODE_HELPERS - help - DRM panel driver for dumb non-eDP panels that need at most a regulator - and a GPIO to be powered up. Optionally a backlight can be attached so - that it can be automatically turned off when the panel goes into a - low power state. - -config DRM_PANEL_EDP - tristate "support for simple Embedded DisplayPort panels" +config DRM_PANEL_BOE_TV101WUM_LL2 + tristate "BOE TV101WUM LL2 1200x1920 panel" depends on OF + depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE - depends on PM - select VIDEOMODE_HELPERS - select DRM_DISPLAY_DP_HELPER - select DRM_DISPLAY_HELPER - select DRM_DP_AUX_BUS - select DRM_KMS_HELPER help - DRM panel driver for dumb eDP panels that need at most a regulator and - a GPIO to be powered up. Optionally a backlight can be attached so - that it can be automatically turned off when the panel goes into a - low power state. + Say Y here if you want to support for BOE TV101WUM-LL2 + WUXGA PANEL DSI Video Mode panel config DRM_PANEL_EBBG_FT8719 tristate "EBBG FT8719 panel driver" @@ -162,6 +135,44 @@ config DRM_PANEL_FEIYANG_FY07024DI26A30D Say Y if you want to enable support for panels based on the Feiyang FY07024DI26A30-D MIPI-DSI interface. +config DRM_PANEL_DSI_CM + tristate "Generic DSI command mode panels" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + DRM panel driver for DSI command mode panels with support for + embedded and external backlights. + +config DRM_PANEL_LVDS + tristate "Generic LVDS panel driver" + depends on OF + depends on BACKLIGHT_CLASS_DEVICE + select VIDEOMODE_HELPERS + help + This driver supports LVDS panels that don't require device-specific + handling of power supplies or control signals. It implements automatic + backlight handling if the panel is attached to a backlight controller. + +config DRM_PANEL_HIMAX_HX83102 + tristate "Himax HX83102-based panels" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y if you want to enable support for panels based on the + Himax HX83102 controller. + +config DRM_PANEL_HIMAX_HX83112A + tristate "Himax HX83112A-based DSI panel" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + select DRM_KMS_HELPER + help + Say Y here if you want to enable support for Himax HX83112A-based + display panels, such as the one found in the Fairphone 4 smartphone. + config DRM_PANEL_HIMAX_HX8394 tristate "HIMAX HX8394 MIPI-DSI LCD panels" depends on OF @@ -184,7 +195,7 @@ config DRM_PANEL_ILITEK_IL9322 config DRM_PANEL_ILITEK_ILI9341 tristate "Ilitek ILI9341 240x320 QVGA panels" - depends on OF && SPI + depends on SPI select DRM_KMS_HELPER select DRM_GEM_DMA_HELPER depends on BACKLIGHT_CLASS_DEVICE @@ -203,6 +214,15 @@ config DRM_PANEL_ILITEK_ILI9805 Say Y if you want to enable support for panels based on the Ilitek ILI9805 controller. +config DRM_PANEL_ILITEK_ILI9806E + tristate "Ilitek ILI9806E-based panels" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y if you want to enable support for panels based on the + Ilitek ILI9806E controller. + config DRM_PANEL_ILITEK_ILI9881C tristate "Ilitek ILI9881C-based panels" depends on OF @@ -251,17 +271,6 @@ config DRM_PANEL_JADARD_JD9365DA_H3 WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with 800RGBx1280 dots at maximum. -config DRM_PANEL_JDI_LT070ME05000 - tristate "JDI LT070ME05000 WUXGA DSI panel" - depends on OF - depends on DRM_MIPI_DSI - depends on BACKLIGHT_CLASS_DEVICE - help - Say Y here if you want to enable support for JDI DSI video mode - panel as found in Google Nexus 7 (2013) devices. - The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses - 24 bit per pixel. - config DRM_PANEL_JDI_LPM102A188A tristate "JDI LPM102A188A DSI panel" depends on OF && GPIOLIB @@ -273,6 +282,17 @@ config DRM_PANEL_JDI_LPM102A188A The panel has a 2560×1800 resolution. It provides a MIPI DSI interface to the host. +config DRM_PANEL_JDI_LT070ME05000 + tristate "JDI LT070ME05000 WUXGA DSI panel" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to enable support for JDI DSI video mode + panel as found in Google Nexus 7 (2013) devices. + The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses + 24 bit per pixel. + config DRM_PANEL_JDI_R63452 tristate "JDI R63452 Full HD DSI panel" depends on OF @@ -326,11 +346,16 @@ config DRM_PANEL_LEADTEK_LTK500HD1829 24 bit RGB per pixel. It provides a MIPI DSI interface to the host and has a built-in LED backlight. -config DRM_PANEL_SAMSUNG_LD9040 - tristate "Samsung LD9040 RGB/SPI panel" - depends on OF && SPI +config DRM_PANEL_LINCOLNTECH_LCD197 + tristate "Lincoln Technologies lcd197 panel" + depends on OF + depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE - select VIDEOMODE_HELPERS + help + Say Y here if you want to enable support for lincolntech lcd197 + TFT-LCD modules. The panel has a 1080x1920 resolution and uses + 24 bit RGB per pixel. It provides a MIPI DSI interface to + the host. config DRM_PANEL_LG_LB035Q02 tristate "LG LB035Q024573 RGB panel" @@ -348,6 +373,19 @@ config DRM_PANEL_LG_LG4573 Say Y here if you want to enable support for LG4573 RGB panel. To compile this driver as a module, choose M here. +config DRM_PANEL_LG_SW43408 + tristate "LG SW43408 panel" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + select DRM_DISPLAY_DSC_HELPER + select DRM_DISPLAY_HELPER + help + Say Y here if you want to enable support for LG sw43408 panel. + The panel has a 1080x2160@60Hz resolution and uses 24 bit RGB per + pixel. It provides a MIPI DSI interface to the host and has a + built-in LED backlight. + config DRM_PANEL_MAGNACHIP_D53E6EA8966 tristate "Magnachip D53E6EA8966 DSI panel" depends on OF && SPI @@ -359,6 +397,17 @@ config DRM_PANEL_MAGNACHIP_D53E6EA8966 with the Magnachip D53E6EA8966 panel IC. This panel receives video data via DSI but commands via 9-bit SPI using DBI. +config DRM_PANEL_MANTIX_MLAF057WE51 + tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to enable support for the Mantix + MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It + has a resolution of 720x1440 pixels, a built in backlight and touch + controller. + config DRM_PANEL_NEC_NL8048HL11 tristate "NEC NL8048HL11 RGB panel" depends on GPIOLIB && OF && SPI @@ -438,6 +487,16 @@ config DRM_PANEL_NOVATEK_NT36672A around the Novatek NT36672A display controller, such as some Tianma panels used in a few Xiaomi Poco F1 mobile phones. +config DRM_PANEL_NOVATEK_NT36672E + tristate "Novatek NT36672E DSI panel" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to enable support for Novatek NT36672E DSI Video Mode + LCD panel module. The panel has a resolution of 1080x2408 and uses 24 bit + RGB per pixel. + config DRM_PANEL_NOVATEK_NT39016 tristate "Novatek NT39016 RGB/SPI panel" depends on OF && SPI @@ -447,17 +506,6 @@ config DRM_PANEL_NOVATEK_NT39016 Say Y here if you want to enable support for the panels built around the Novatek NT39016 display controller. -config DRM_PANEL_MANTIX_MLAF057WE51 - tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" - depends on OF - depends on DRM_MIPI_DSI - depends on BACKLIGHT_CLASS_DEVICE - help - Say Y here if you want to enable support for the Mantix - MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It - has a resolution of 720x1440 pixels, a built in backlight and touch - controller. - config DRM_PANEL_OLIMEX_LCD_OLINUXINO tristate "Olimex LCD-OLinuXino panel" depends on OF @@ -539,12 +587,24 @@ config DRM_PANEL_RAYDIUM_RM692E5 depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE - select DRM_DISPLAY_DP_HELPER + select DRM_DISPLAY_DSC_HELPER select DRM_DISPLAY_HELPER help Say Y here if you want to enable support for Raydium RM692E5-based display panels, such as the one found in the Fairphone 5 smartphone. +config DRM_PANEL_RAYDIUM_RM69380 + tristate "Raydium RM69380-based DSI panel" + depends on OF && GPIOLIB + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to enable support for Raydium RM69380-based + display panels. + + This panel controller can be found in the Lenovo Xiaoxin Pad Pro 2021 + in combination with an EDO OLED panel. + config DRM_PANEL_RONBO_RB070D30 tristate "Ronbo Electronics RB070D30 panel" depends on OF @@ -554,6 +614,40 @@ config DRM_PANEL_RONBO_RB070D30 Say Y here if you want to enable support for Ronbo Electronics RB070D30 1024x600 DSI panel. +config DRM_PANEL_SAMSUNG_AMS581VF01 + tristate "Samsung AMS581VF01 panel" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y or M here if you want to enable support for the + Samsung AMS581VF01 FHD Plus (2340x1080@60Hz) CMD mode panel. + +config DRM_PANEL_SAMSUNG_AMS639RQ08 + tristate "Samsung AMS639RQ08 panel" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y or M here if you want to enable support for the + Samsung AMS639RQ08 FHD Plus (2340x1080@60Hz) CMD mode panel. + +config DRM_PANEL_SAMSUNG_S6E88A0_AMS427AP24 + tristate "Samsung AMS427AP24 panel with S6E88A0 controller" + depends on GPIOLIB && OF && REGULATOR + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to enable support for Samsung AMS427AP24 panel + with S6E88A0 controller (found in Samsung Galaxy S4 Mini Value Edition + GT-I9195I). To compile this driver as a module, choose M here. + +config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 + tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller" + depends on OF + select DRM_MIPI_DSI + select VIDEOMODE_HELPERS + config DRM_PANEL_SAMSUNG_ATNA33XC20 tristate "Samsung ATNA33XC20 eDP panel" depends on OF @@ -561,7 +655,7 @@ config DRM_PANEL_SAMSUNG_ATNA33XC20 depends on PM select DRM_DISPLAY_DP_HELPER select DRM_DISPLAY_HELPER - select DRM_DP_AUX_BUS + select DRM_DISPLAY_DP_AUX_BUS help DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't be handled by the DRM_PANEL_SIMPLE driver because its power @@ -577,6 +671,21 @@ config DRM_PANEL_SAMSUNG_DB7430 DB7430 DPI display controller used in such devices as the LMS397KF04 480x800 DPI panel. +config DRM_PANEL_SAMSUNG_LD9040 + tristate "Samsung LD9040 RGB/SPI panel" + depends on OF && SPI + depends on BACKLIGHT_CLASS_DEVICE + select VIDEOMODE_HELPERS + +config DRM_PANEL_SAMSUNG_S6E3FA7 + tristate "Samsung S6E3FA7 panel driver" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to enable support for the Samsung S6E3FA7 + 1920x2220 panel. + config DRM_PANEL_SAMSUNG_S6D16D0 tristate "Samsung S6D16D0 DSI video mode panel" depends on OF @@ -608,6 +717,14 @@ config DRM_PANEL_SAMSUNG_S6E3HA2 depends on BACKLIGHT_CLASS_DEVICE select VIDEOMODE_HELPERS +config DRM_PANEL_SAMSUNG_S6E3HA8 + tristate "Samsung S6E3HA8 DSI video mode panel" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + select DRM_DISPLAY_DSC_HELPER + select VIDEOMODE_HELPERS + config DRM_PANEL_SAMSUNG_S6E63J0X03 tristate "Samsung S6E63J0X03 DSI command mode panel" depends on OF @@ -642,12 +759,6 @@ config DRM_PANEL_SAMSUNG_S6E63M0_DSI Say Y here if you want to be able to access the Samsung S6E63M0 panel using DSI. -config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 - tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller" - depends on OF - select DRM_MIPI_DSI - select VIDEOMODE_HELPERS - config DRM_PANEL_SAMSUNG_S6E8AA0 tristate "Samsung S6E8AA0 DSI video mode panel" depends on OF @@ -718,7 +829,8 @@ config DRM_PANEL_SHARP_LS060T1SX01 config DRM_PANEL_SITRONIX_ST7701 tristate "Sitronix ST7701 panel driver" depends on OF - depends on DRM_MIPI_DSI + depends on SPI || DRM_MIPI_DSI + select DRM_MIPI_DBI if SPI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for the Sitronix @@ -746,15 +858,6 @@ config DRM_PANEL_SITRONIX_ST7789V Say Y here if you want to enable support for the Sitronix ST7789V controller for 240x320 LCD panels -config DRM_PANEL_SYNAPTICS_R63353 - tristate "Synaptics R63353-based panels" - depends on OF - depends on DRM_MIPI_DSI - depends on BACKLIGHT_CLASS_DEVICE - help - Say Y if you want to enable support for panels based on the - Synaptics R63353 controller. - config DRM_PANEL_SONY_ACX565AKM tristate "Sony ACX565AKM panel" depends on GPIOLIB && OF && SPI @@ -794,6 +897,43 @@ config DRM_PANEL_STARTEK_KD070FHFID015 with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to the host, a built-in LED backlight and touch controller. +config DRM_PANEL_EDP + tristate "support for simple Embedded DisplayPort panels" + depends on OF + depends on BACKLIGHT_CLASS_DEVICE + depends on PM + select VIDEOMODE_HELPERS + select DRM_DISPLAY_DP_HELPER + select DRM_DISPLAY_HELPER + select DRM_DISPLAY_DP_AUX_BUS + select DRM_KMS_HELPER + help + DRM panel driver for dumb eDP panels that need at most a regulator and + a GPIO to be powered up. Optionally a backlight can be attached so + that it can be automatically turned off when the panel goes into a + low power state. + +config DRM_PANEL_SIMPLE + tristate "support for simple panels (other than eDP ones)" + depends on OF + depends on BACKLIGHT_CLASS_DEVICE + depends on PM + select VIDEOMODE_HELPERS + help + DRM panel driver for dumb non-eDP panels that need at most a regulator + and a GPIO to be powered up. Optionally a backlight can be attached so + that it can be automatically turned off when the panel goes into a + low power state. + +config DRM_PANEL_SYNAPTICS_R63353 + tristate "Synaptics R63353-based panels" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y if you want to enable support for panels based on the + Synaptics R63353 controller. + config DRM_PANEL_TDO_TL070WSH30 tristate "TDO TL070WSH30 DSI panel" depends on OF @@ -837,6 +977,17 @@ config DRM_PANEL_TRULY_NT35597_WQXGA Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI Video Mode panel +config DRM_PANEL_VISIONOX_R66451 + tristate "Visionox R66451" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + select DRM_DISPLAY_DSC_HELPER + select DRM_DISPLAY_HELPER + help + Say Y here if you want to enable support for Visionox + R66451 1080x2340 AMOLED DSI panel. + config DRM_PANEL_VISIONOX_RM69299 tristate "Visionox RM69299" depends on OF @@ -854,17 +1005,6 @@ config DRM_PANEL_VISIONOX_VTDR6130 Say Y here if you want to enable support for Visionox VTDR6130 1080x2400 AMOLED DSI panel. -config DRM_PANEL_VISIONOX_R66451 - tristate "Visionox R66451" - depends on OF - depends on DRM_MIPI_DSI - depends on BACKLIGHT_CLASS_DEVICE - select DRM_DISPLAY_DP_HELPER - select DRM_DISPLAY_HELPER - help - Say Y here if you want to enable support for Visionox - R66451 1080x2340 AMOLED DSI panel. - config DRM_PANEL_WIDECHIPS_WS2401 tristate "Widechips WS2401 DPI panel driver" depends on SPI && GPIOLIB |