diff options
Diffstat (limited to 'drivers/gpu/drm/panel')
19 files changed, 578 insertions, 69 deletions
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index 38799effd00a..a9043eacce97 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -115,6 +115,17 @@ config DRM_PANEL_EDP that it can be automatically turned off when the panel goes into a low power state. +config DRM_PANEL_EBBG_FT8719 + tristate "EBBG FT8719 panel driver" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to enable support for the EBBG FT8719 + video mode panel. Mainly found on Xiaomi Poco F1 mobile phone. + The panel has a resolution of 1080x2246. It provides a MIPI DSI + interface to the host. + config DRM_PANEL_ELIDA_KD35T133 tristate "Elida KD35T133 panel driver" depends on OF @@ -438,6 +449,8 @@ config DRM_PANEL_SAMSUNG_ATNA33XC20 depends on OF depends on BACKLIGHT_CLASS_DEVICE depends on PM + select DRM_DISPLAY_DP_HELPER + select DRM_DISPLAY_HELPER select DRM_DP_AUX_BUS help DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index 42a7ab54234b..34e717382dbb 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_DRM_PANEL_DSI_CM) += panel-dsi-cm.o obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o obj-$(CONFIG_DRM_PANEL_EDP) += panel-edp.o +obj-$(CONFIG_DRM_PANEL_EBBG_FT8719) += panel-ebbg-ft8719.o obj-$(CONFIG_DRM_PANEL_ELIDA_KD35T133) += panel-elida-kd35t133.o obj-$(CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02) += panel-feixin-k101-im2ba02.o obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d.o diff --git a/drivers/gpu/drm/panel/panel-asus-z00t-tm5p5-n35596.c b/drivers/gpu/drm/panel/panel-asus-z00t-tm5p5-n35596.c index 44674ebedf59..174ff434bd71 100644 --- a/drivers/gpu/drm/panel/panel-asus-z00t-tm5p5-n35596.c +++ b/drivers/gpu/drm/panel/panel-asus-z00t-tm5p5-n35596.c @@ -215,14 +215,9 @@ static const struct drm_panel_funcs tm5p5_nt35596_panel_funcs = { static int tm5p5_nt35596_bl_update_status(struct backlight_device *bl) { struct mipi_dsi_device *dsi = bl_get_data(bl); - u16 brightness = bl->props.brightness; + u16 brightness = backlight_get_brightness(bl); int ret; - if (bl->props.power != FB_BLANK_UNBLANK || - bl->props.fb_blank != FB_BLANK_UNBLANK || - bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK)) - brightness = 0; - dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; ret = mipi_dsi_dcs_set_display_brightness(dsi, brightness); diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c index 1be150ac758f..07f722f33fc5 100644 --- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c +++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c @@ -1511,16 +1511,28 @@ static int boe_panel_get_modes(struct drm_panel *panel, connector->display_info.width_mm = boe->desc->size.width_mm; connector->display_info.height_mm = boe->desc->size.height_mm; connector->display_info.bpc = boe->desc->bpc; + /* + * TODO: Remove once all drm drivers call + * drm_connector_set_orientation_from_panel() + */ drm_connector_set_panel_orientation(connector, boe->orientation); return 1; } +static enum drm_panel_orientation boe_panel_get_orientation(struct drm_panel *panel) +{ + struct boe_panel *boe = to_boe_panel(panel); + + return boe->orientation; +} + static const struct drm_panel_funcs boe_panel_funcs = { .unprepare = boe_panel_unprepare, .prepare = boe_panel_prepare, .enable = boe_panel_enable, .get_modes = boe_panel_get_modes, + .get_orientation = boe_panel_get_orientation, }; static int boe_panel_add(struct boe_panel *boe) diff --git a/drivers/gpu/drm/panel/panel-dsi-cm.c b/drivers/gpu/drm/panel/panel-dsi-cm.c index b58cb064975f..b0213a518f9d 100644 --- a/drivers/gpu/drm/panel/panel-dsi-cm.c +++ b/drivers/gpu/drm/panel/panel-dsi-cm.c @@ -85,17 +85,10 @@ static void dsicm_bl_power(struct panel_drv_data *ddata, bool enable) else return; - if (enable) { - backlight->props.fb_blank = FB_BLANK_UNBLANK; - backlight->props.state = ~(BL_CORE_FBBLANK | BL_CORE_SUSPENDED); - backlight->props.power = FB_BLANK_UNBLANK; - } else { - backlight->props.fb_blank = FB_BLANK_NORMAL; - backlight->props.power = FB_BLANK_POWERDOWN; - backlight->props.state |= BL_CORE_FBBLANK | BL_CORE_SUSPENDED; - } - - backlight_update_status(backlight); + if (enable) + backlight_enable(backlight); + else + backlight_disable(backlight); } static void hw_guard_start(struct panel_drv_data *ddata, int guard_msec) @@ -196,13 +189,7 @@ static int dsicm_bl_update_status(struct backlight_device *dev) { struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev); int r = 0; - int level; - - if (dev->props.fb_blank == FB_BLANK_UNBLANK && - dev->props.power == FB_BLANK_UNBLANK) - level = dev->props.brightness; - else - level = 0; + int level = backlight_get_brightness(dev); dev_dbg(&ddata->dsi->dev, "update brightness to %d\n", level); @@ -219,11 +206,7 @@ static int dsicm_bl_update_status(struct backlight_device *dev) static int dsicm_bl_get_intensity(struct backlight_device *dev) { - if (dev->props.fb_blank == FB_BLANK_UNBLANK && - dev->props.power == FB_BLANK_UNBLANK) - return dev->props.brightness; - - return 0; + return backlight_get_brightness(dev); } static const struct backlight_ops dsicm_bl_ops = { diff --git a/drivers/gpu/drm/panel/panel-ebbg-ft8719.c b/drivers/gpu/drm/panel/panel-ebbg-ft8719.c new file mode 100644 index 000000000000..386f8321b930 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-ebbg-ft8719.c @@ -0,0 +1,285 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2022 Joel Selvaraj <jo@jsfamily.in> + * Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree: + * Copyright (c) 2013, The Linux Foundation. All rights reserved. + */ + +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/regulator/consumer.h> +#include <linux/module.h> +#include <linux/of.h> + +#include <video/mipi_display.h> + +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_modes.h> +#include <drm/drm_panel.h> + +static const char * const regulator_names[] = { + "vddio", + "vddpos", + "vddneg", +}; + +static const unsigned long regulator_enable_loads[] = { + 62000, + 100000, + 100000 +}; + +struct ebbg_ft8719 { + struct drm_panel panel; + struct mipi_dsi_device *dsi; + + struct regulator_bulk_data supplies[ARRAY_SIZE(regulator_names)]; + + struct gpio_desc *reset_gpio; +}; + +static inline +struct ebbg_ft8719 *to_ebbg_ft8719(struct drm_panel *panel) +{ + return container_of(panel, struct ebbg_ft8719, panel); +} + +static void ebbg_ft8719_reset(struct ebbg_ft8719 *ctx) +{ + gpiod_set_value_cansleep(ctx->reset_gpio, 0); + usleep_range(4000, 5000); + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + usleep_range(1000, 2000); + gpiod_set_value_cansleep(ctx->reset_gpio, 0); + usleep_range(15000, 16000); +} + +static int ebbg_ft8719_on(struct ebbg_ft8719 *ctx) +{ + struct mipi_dsi_device *dsi = ctx->dsi; + struct device *dev = &dsi->dev; + int ret; + + dsi->mode_flags |= MIPI_DSI_MODE_LPM; + + ret = mipi_dsi_dcs_set_display_brightness(dsi, 0x00ff); + if (ret < 0) { + dev_err(dev, "Failed to set display brightness: %d\n", ret); + return ret; + } + + mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x24); + mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_POWER_SAVE, 0x00); + + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); + if (ret < 0) { + dev_err(dev, "Failed to exit sleep mode: %d\n", ret); + return ret; + } + msleep(90); + + ret = mipi_dsi_dcs_set_display_on(dsi); + if (ret < 0) { + dev_err(dev, "Failed to set display on: %d\n", ret); + return ret; + } + + return 0; +} + +static int ebbg_ft8719_off(struct ebbg_ft8719 *ctx) +{ + struct mipi_dsi_device *dsi = ctx->dsi; + struct device *dev = &dsi->dev; + int ret; + + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; + + ret = mipi_dsi_dcs_set_display_off(dsi); + if (ret < 0) { + dev_err(dev, "Failed to set display off: %d\n", ret); + return ret; + } + usleep_range(10000, 11000); + + ret = mipi_dsi_dcs_enter_sleep_mode(dsi); + if (ret < 0) { + dev_err(dev, "Failed to enter sleep mode: %d\n", ret); + return ret; + } + msleep(90); + + return 0; +} + +static int ebbg_ft8719_prepare(struct drm_panel *panel) +{ + struct ebbg_ft8719 *ctx = to_ebbg_ft8719(panel); + struct device *dev = &ctx->dsi->dev; + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies); + if (ret < 0) + return ret; + + ebbg_ft8719_reset(ctx); + + ret = ebbg_ft8719_on(ctx); + if (ret < 0) { + dev_err(dev, "Failed to initialize panel: %d\n", ret); + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + return ret; + } + + return 0; +} + +static int ebbg_ft8719_unprepare(struct drm_panel *panel) +{ + struct ebbg_ft8719 *ctx = to_ebbg_ft8719(panel); + struct device *dev = &ctx->dsi->dev; + int ret; + + ret = ebbg_ft8719_off(ctx); + if (ret < 0) + dev_err(dev, "Failed to un-initialize panel: %d\n", ret); + + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + + ret = regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies); + if (ret) + dev_err(panel->dev, "Failed to disable regulators: %d\n", ret); + + return 0; +} + +static const struct drm_display_mode ebbg_ft8719_mode = { + .clock = (1080 + 28 + 4 + 16) * (2246 + 120 + 4 + 12) * 60 / 1000, + .hdisplay = 1080, + .hsync_start = 1080 + 28, + .hsync_end = 1080 + 28 + 4, + .htotal = 1080 + 28 + 4 + 16, + .vdisplay = 2246, + .vsync_start = 2246 + 120, + .vsync_end = 2246 + 120 + 4, + .vtotal = 2246 + 120 + 4 + 12, + .width_mm = 68, + .height_mm = 141, +}; + +static int ebbg_ft8719_get_modes(struct drm_panel *panel, + struct drm_connector *connector) +{ + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(connector->dev, &ebbg_ft8719_mode); + if (!mode) + return -ENOMEM; + + drm_mode_set_name(mode); + + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + connector->display_info.width_mm = mode->width_mm; + connector->display_info.height_mm = mode->height_mm; + drm_mode_probed_add(connector, mode); + + return 1; +} + +static const struct drm_panel_funcs ebbg_ft8719_panel_funcs = { + .prepare = ebbg_ft8719_prepare, + .unprepare = ebbg_ft8719_unprepare, + .get_modes = ebbg_ft8719_get_modes, +}; + +static int ebbg_ft8719_probe(struct mipi_dsi_device *dsi) +{ + struct device *dev = &dsi->dev; + struct ebbg_ft8719 *ctx; + int i, ret; + + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + for (i = 0; i < ARRAY_SIZE(ctx->supplies); i++) + ctx->supplies[i].supply = regulator_names[i]; + + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies), + ctx->supplies); + if (ret < 0) + return dev_err_probe(dev, ret, "Failed to get regulators\n"); + + for (i = 0; i < ARRAY_SIZE(ctx->supplies); i++) { + ret = regulator_set_load(ctx->supplies[i].consumer, + regulator_enable_loads[i]); + if (ret) + return dev_err_probe(dev, ret, + "Failed to set regulator load\n"); + } + + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(ctx->reset_gpio)) + return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio), + "Failed to get reset-gpios\n"); + + ctx->dsi = dsi; + mipi_dsi_set_drvdata(dsi, ctx); + + dsi->lanes = 4; + dsi->format = MIPI_DSI_FMT_RGB888; + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | + MIPI_DSI_CLOCK_NON_CONTINUOUS; + + drm_panel_init(&ctx->panel, dev, &ebbg_ft8719_panel_funcs, + DRM_MODE_CONNECTOR_DSI); + + ret = drm_panel_of_backlight(&ctx->panel); + if (ret) + return dev_err_probe(dev, ret, "Failed to get backlight\n"); + + drm_panel_add(&ctx->panel); + + ret = mipi_dsi_attach(dsi); + if (ret < 0) { + dev_err(dev, "Failed to attach to DSI host: %d\n", ret); + drm_panel_remove(&ctx->panel); + return ret; + } + + return 0; +} + +static int ebbg_ft8719_remove(struct mipi_dsi_device *dsi) +{ + struct ebbg_ft8719 *ctx = mipi_dsi_get_drvdata(dsi); + int ret; + + ret = mipi_dsi_detach(dsi); + if (ret < 0) + dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret); + + drm_panel_remove(&ctx->panel); + + return 0; +} + +static const struct of_device_id ebbg_ft8719_of_match[] = { + { .compatible = "ebbg,ft8719" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, ebbg_ft8719_of_match); + +static struct mipi_dsi_driver ebbg_ft8719_driver = { + .probe = ebbg_ft8719_probe, + .remove = ebbg_ft8719_remove, + .driver = { + .name = "panel-ebbg-ft8719", + .of_match_table = ebbg_ft8719_of_match, + }, +}; +module_mipi_dsi_driver(ebbg_ft8719_driver); + +MODULE_AUTHOR("Joel Selvaraj <jo@jsfamily.in>"); +MODULE_DESCRIPTION("DRM driver for EBBG FT8719 video dsi panel"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpu/drm/panel/panel-edp.c b/drivers/gpu/drm/panel/panel-edp.c index c96014464355..3626469c4cc2 100644 --- a/drivers/gpu/drm/panel/panel-edp.c +++ b/drivers/gpu/drm/panel/panel-edp.c @@ -39,6 +39,7 @@ #include <drm/display/drm_dp_helper.h> #include <drm/drm_crtc.h> #include <drm/drm_device.h> +#include <drm/drm_edid.h> #include <drm/drm_panel.h> /** @@ -417,6 +418,11 @@ static int panel_edp_get_hpd_gpio(struct device *dev, struct panel_edp *p) return 0; } +static bool panel_edp_can_read_hpd(struct panel_edp *p) +{ + return !p->no_hpd && (p->hpd_gpio || (p->aux && p->aux->wait_hpd_asserted)); +} + static int panel_edp_prepare_once(struct panel_edp *p) { struct device *dev = p->base.dev; @@ -441,17 +447,21 @@ static int panel_edp_prepare_once(struct panel_edp *p) if (delay) msleep(delay); - if (p->hpd_gpio) { + if (panel_edp_can_read_hpd(p)) { if (p->desc->delay.hpd_absent) hpd_wait_us = p->desc->delay.hpd_absent * 1000UL; else hpd_wait_us = 2000000; - err = readx_poll_timeout(gpiod_get_value_cansleep, p->hpd_gpio, - hpd_asserted, hpd_asserted, - 1000, hpd_wait_us); - if (hpd_asserted < 0) - err = hpd_asserted; + if (p->hpd_gpio) { + err = readx_poll_timeout(gpiod_get_value_cansleep, + p->hpd_gpio, hpd_asserted, + hpd_asserted, 1000, hpd_wait_us); + if (hpd_asserted < 0) + err = hpd_asserted; + } else { + err = p->aux->wait_hpd_asserted(p->aux, hpd_wait_us); + } if (err) { if (err != -ETIMEDOUT) @@ -532,18 +542,22 @@ static int panel_edp_enable(struct drm_panel *panel) /* * If there is a "prepare_to_enable" delay then that's supposed to be * the delay from HPD going high until we can turn the backlight on. - * However, we can only count this if HPD is handled by the panel - * driver, not if it goes to a dedicated pin on the controller. + * However, we can only count this if HPD is readable by the panel + * driver. + * * If we aren't handling the HPD pin ourselves then the best we * can do is assume that HPD went high immediately before we were - * called (and link training took zero time). + * called (and link training took zero time). Note that "no-hpd" + * actually counts as handling HPD ourselves since we're doing the + * worst case delay (in prepare) ourselves. * * NOTE: if we ever end up in this "if" statement then we're * guaranteed that the panel_edp_wait() call below will do no delay. * It already handles that case, though, so we don't need any special * code for it. */ - if (p->desc->delay.prepare_to_enable && !p->hpd_gpio && !p->no_hpd) + if (p->desc->delay.prepare_to_enable && + !panel_edp_can_read_hpd(p) && !p->no_hpd) delay = max(delay, p->desc->delay.prepare_to_enable); if (delay) @@ -586,7 +600,10 @@ static int panel_edp_get_modes(struct drm_panel *panel, else if (!num) dev_warn(p->base.dev, "No display modes\n"); - /* set up connector's "panel orientation" property */ + /* + * TODO: Remove once all drm drivers call + * drm_connector_set_orientation_from_panel() + */ drm_connector_set_panel_orientation(connector, p->orientation); return num; @@ -609,6 +626,13 @@ static int panel_edp_get_timings(struct drm_panel *panel, return p->desc->num_timings; } +static enum drm_panel_orientation panel_edp_get_orientation(struct drm_panel *panel) +{ + struct panel_edp *p = to_panel_edp(panel); + + return p->orientation; +} + static int detected_panel_show(struct seq_file *s, void *data) { struct drm_panel *panel = s->private; @@ -637,6 +661,7 @@ static const struct drm_panel_funcs panel_edp_funcs = { .prepare = panel_edp_prepare, .enable = panel_edp_enable, .get_modes = panel_edp_get_modes, + .get_orientation = panel_edp_get_orientation, .get_timings = panel_edp_get_timings, .debugfs_init = panel_edp_debugfs_init, }; @@ -1860,6 +1885,7 @@ static const struct edp_panel_entry edp_panels[] = { EDP_PANEL_ENTRY('K', 'D', 'B', 0x0624, &kingdisplay_kd116n21_30nv_a010.delay, "116N21-30NV-A010"), EDP_PANEL_ENTRY('K', 'D', 'B', 0x1120, &delay_200_500_e80_d50, "116N29-30NK-C007"), + EDP_PANEL_ENTRY('S', 'H', 'P', 0x1511, &delay_200_500_e50, "LQ140M1JW48"), EDP_PANEL_ENTRY('S', 'H', 'P', 0x1523, &sharp_lq140m1jw46.delay, "LQ140M1JW46"), EDP_PANEL_ENTRY('S', 'H', 'P', 0x154c, &delay_200_500_p2e100, "LQ116M1JW10"), diff --git a/drivers/gpu/drm/panel/panel-elida-kd35t133.c b/drivers/gpu/drm/panel/panel-elida-kd35t133.c index 80227617a4d6..01dd555a7f26 100644 --- a/drivers/gpu/drm/panel/panel-elida-kd35t133.c +++ b/drivers/gpu/drm/panel/panel-elida-kd35t133.c @@ -217,15 +217,27 @@ static int kd35t133_get_modes(struct drm_panel *panel, connector->display_info.width_mm = mode->width_mm; connector->display_info.height_mm = mode->height_mm; drm_mode_probed_add(connector, mode); + /* + * TODO: Remove once all drm drivers call + * drm_connector_set_orientation_from_panel() + */ drm_connector_set_panel_orientation(connector, ctx->orientation); return 1; } +static enum drm_panel_orientation kd35t133_get_orientation(struct drm_panel *panel) +{ + struct kd35t133 *ctx = panel_to_kd35t133(panel); + + return ctx->orientation; +} + static const struct drm_panel_funcs kd35t133_funcs = { .unprepare = kd35t133_unprepare, .prepare = kd35t133_prepare, .get_modes = kd35t133_get_modes, + .get_orientation = kd35t133_get_orientation, }; static int kd35t133_probe(struct mipi_dsi_device *dsi) diff --git a/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c index a9cd7135cb51..ee61d60eceae 100644 --- a/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c +++ b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c @@ -209,7 +209,7 @@ static int feiyang_dsi_probe(struct mipi_dsi_device *dsi) return dev_err_probe(&dsi->dev, PTR_ERR(ctx->avdd), "Couldn't get avdd regulator\n"); - ctx->reset = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW); + ctx->reset = devm_gpiod_get_optional(&dsi->dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(ctx->reset)) return dev_err_probe(&dsi->dev, PTR_ERR(ctx->reset), "Couldn't get our reset GPIO\n"); diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c b/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c index ba30d11547ad..596861269774 100644 --- a/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c +++ b/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c @@ -853,17 +853,29 @@ static int ili9881c_get_modes(struct drm_panel *panel, connector->display_info.width_mm = mode->width_mm; connector->display_info.height_mm = mode->height_mm; + /* + * TODO: Remove once all drm drivers call + * drm_connector_set_orientation_from_panel() + */ drm_connector_set_panel_orientation(connector, ctx->orientation); return 1; } +static enum drm_panel_orientation ili9881c_get_orientation(struct drm_panel *panel) +{ + struct ili9881c *ctx = panel_to_ili9881c(panel); + + return ctx->orientation; +} + static const struct drm_panel_funcs ili9881c_funcs = { .prepare = ili9881c_prepare, .unprepare = ili9881c_unprepare, .enable = ili9881c_enable, .disable = ili9881c_disable, .get_modes = ili9881c_get_modes, + .get_orientation = ili9881c_get_orientation, }; static int ili9881c_dsi_probe(struct mipi_dsi_device *dsi) diff --git a/drivers/gpu/drm/panel/panel-lvds.c b/drivers/gpu/drm/panel/panel-lvds.c index f11252fb00fe..de8758c30e6e 100644 --- a/drivers/gpu/drm/panel/panel-lvds.c +++ b/drivers/gpu/drm/panel/panel-lvds.c @@ -99,15 +99,28 @@ static int panel_lvds_get_modes(struct drm_panel *panel, drm_display_info_set_bus_formats(&connector->display_info, &lvds->bus_format, 1); connector->display_info.bus_flags = lvds->bus_flags; + + /* + * TODO: Remove once all drm drivers call + * drm_connector_set_orientation_from_panel() + */ drm_connector_set_panel_orientation(connector, lvds->orientation); return 1; } +static enum drm_panel_orientation panel_lvds_get_orientation(struct drm_panel *panel) +{ + struct panel_lvds *lvds = to_panel_lvds(panel); + + return lvds->orientation; +} + static const struct drm_panel_funcs panel_lvds_funcs = { .unprepare = panel_lvds_unprepare, .prepare = panel_lvds_prepare, .get_modes = panel_lvds_get_modes, + .get_orientation = panel_lvds_get_orientation, }; static int panel_lvds_parse_dt(struct panel_lvds *lvds) diff --git a/drivers/gpu/drm/panel/panel-novatek-nt35510.c b/drivers/gpu/drm/panel/panel-novatek-nt35510.c index 873cbd38e6d3..40ea41b0a5dd 100644 --- a/drivers/gpu/drm/panel/panel-novatek-nt35510.c +++ b/drivers/gpu/drm/panel/panel-novatek-nt35510.c @@ -190,7 +190,7 @@ struct nt35510_config { * 6 = Hsync x 2 * 7 = Hsync x 4 * bits 4..6 in the upper nibble controls BTP, the boosting - * amplification for the the step-up circuit: + * amplification for the step-up circuit: * 0 = Disable * 1 = 1.5 x VDDB * 2 = 1.66 x VDDB @@ -211,7 +211,7 @@ struct nt35510_config { * bits 0..2 in the lower nibble controls NCK, the booster clock * frequency, the values are the same as for PCK in @bt1ctr. * bits 4..5 in the upper nibble controls BTN, the boosting - * amplification for the the step-up circuit. + * amplification for the step-up circuit. * 0 = Disable * 1 = -1.5 x VDDB * 2 = -2 x VDDB @@ -250,7 +250,7 @@ struct nt35510_config { * bits 0..2 in the lower nibble controls LCK, the booster clock * frequency, the values are the same as for PCK in @bt1ctr. * bits 4..5 in the upper nibble controls BTL, the boosting - * amplification for the the step-up circuit. + * amplification for the step-up circuit. * 0 = AVEE + VCL * 1 = AVEE - AVDD * 2 = AVEE + VCL - AVDD diff --git a/drivers/gpu/drm/panel/panel-novatek-nt36672a.c b/drivers/gpu/drm/panel/panel-novatek-nt36672a.c index 231f371901e8..6d6ce42787e2 100644 --- a/drivers/gpu/drm/panel/panel-novatek-nt36672a.c +++ b/drivers/gpu/drm/panel/panel-novatek-nt36672a.c @@ -628,6 +628,10 @@ static int nt36672a_panel_add(struct nt36672a_panel *pinfo) drm_panel_init(&pinfo->base, dev, &panel_funcs, DRM_MODE_CONNECTOR_DSI); + ret = drm_panel_of_backlight(&pinfo->base); + if (ret) + return dev_err_probe(dev, ret, "Failed to get backlight\n"); + drm_panel_add(&pinfo->base); return 0; diff --git a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c index 145047e19394..a6dc5ab182fa 100644 --- a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c +++ b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c @@ -45,6 +45,7 @@ #include <linux/err.h> #include <linux/fb.h> #include <linux/i2c.h> +#include <linux/media-bus-format.h> #include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> diff --git a/drivers/gpu/drm/panel/panel-raydium-rm67191.c b/drivers/gpu/drm/panel/panel-raydium-rm67191.c index 572547d1aa83..4e021a572211 100644 --- a/drivers/gpu/drm/panel/panel-raydium-rm67191.c +++ b/drivers/gpu/drm/panel/panel-raydium-rm67191.c @@ -8,6 +8,7 @@ #include <linux/backlight.h> #include <linux/delay.h> #include <linux/gpio/consumer.h> +#include <linux/media-bus-format.h> #include <linux/module.h> #include <linux/of.h> #include <linux/regulator/consumer.h> diff --git a/drivers/gpu/drm/panel/panel-samsung-atna33xc20.c b/drivers/gpu/drm/panel/panel-samsung-atna33xc20.c index 3dd10412d147..5a8b978c6415 100644 --- a/drivers/gpu/drm/panel/panel-samsung-atna33xc20.c +++ b/drivers/gpu/drm/panel/panel-samsung-atna33xc20.c @@ -19,6 +19,10 @@ #include <drm/drm_edid.h> #include <drm/drm_panel.h> +/* T3 VCC to HPD high is max 200 ms */ +#define HPD_MAX_MS 200 +#define HPD_MAX_US (HPD_MAX_MS * 1000) + struct atana33xc20_panel { struct drm_panel base; bool prepared; @@ -30,6 +34,7 @@ struct atana33xc20_panel { struct regulator *supply; struct gpio_desc *el_on3_gpio; + struct drm_dp_aux *aux; struct edid *edid; @@ -79,7 +84,7 @@ static int atana33xc20_suspend(struct device *dev) static int atana33xc20_resume(struct device *dev) { struct atana33xc20_panel *p = dev_get_drvdata(dev); - bool hpd_asserted = false; + int hpd_asserted; int ret; /* T12 (Power off time) is min 500 ms */ @@ -90,23 +95,41 @@ static int atana33xc20_resume(struct device *dev) return ret; p->powered_on_time = ktime_get(); - /* - * Handle HPD. Note: if HPD is hooked up to a dedicated pin on the - * eDP controller then "no_hpd" will be false _and_ "hpd_gpio" will be - * NULL. It's up to the controller driver to wait for HPD after - * preparing the panel in that case. - */ if (p->no_hpd) { - /* T3 VCC to HPD high is max 200 ms */ - msleep(200); - } else if (p->hpd_gpio) { + msleep(HPD_MAX_MS); + return 0; + } + + if (p->hpd_gpio) { ret = readx_poll_timeout(gpiod_get_value_cansleep, p->hpd_gpio, hpd_asserted, hpd_asserted, - 1000, 200000); - if (!hpd_asserted) - dev_warn(dev, "Timeout waiting for HPD\n"); + 1000, HPD_MAX_US); + if (hpd_asserted < 0) + ret = hpd_asserted; + + if (ret) + dev_warn(dev, "Error waiting for HPD GPIO: %d\n", ret); + + return ret; } + if (p->aux->wait_hpd_asserted) { + ret = p->aux->wait_hpd_asserted(p->aux, HPD_MAX_US); + + if (ret) + dev_warn(dev, "Controller error waiting for HPD: %d\n", ret); + + return ret; + } + + /* + * Note that it's possible that no_hpd is false, hpd_gpio is + * NULL, and wait_hpd_asserted is NULL. This is because + * wait_hpd_asserted() is optional even if HPD is hooked up to + * a dedicated pin on the eDP controller. In this case we just + * assume that the controller driver will wait for HPD at the + * right times. + */ return 0; } @@ -263,6 +286,8 @@ static int atana33xc20_probe(struct dp_aux_ep_device *aux_ep) return -ENOMEM; dev_set_drvdata(dev, panel); + panel->aux = aux_ep->aux; + panel->supply = devm_regulator_get(dev, "power"); if (IS_ERR(panel->supply)) return dev_err_probe(dev, PTR_ERR(panel->supply), diff --git a/drivers/gpu/drm/panel/panel-seiko-43wvf1g.c b/drivers/gpu/drm/panel/panel-seiko-43wvf1g.c index 3939b25e6666..76160e5d43bd 100644 --- a/drivers/gpu/drm/panel/panel-seiko-43wvf1g.c +++ b/drivers/gpu/drm/panel/panel-seiko-43wvf1g.c @@ -7,6 +7,7 @@ */ #include <linux/delay.h> +#include <linux/media-bus-format.h> #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 4a2e580a2f7b..ff5e1a44c43a 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -23,6 +23,8 @@ #include <linux/delay.h> #include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/media-bus-format.h> #include <linux/module.h> #include <linux/of_platform.h> #include <linux/platform_device.h> @@ -35,6 +37,7 @@ #include <drm/drm_crtc.h> #include <drm/drm_device.h> +#include <drm/drm_edid.h> #include <drm/drm_mipi_dsi.h> #include <drm/drm_panel.h> @@ -411,7 +414,10 @@ static int panel_simple_get_modes(struct drm_panel *panel, /* add hard-coded panel modes */ num += panel_simple_get_non_edid_modes(p, connector); - /* set up connector's "panel orientation" property */ + /* + * TODO: Remove once all drm drivers call + * drm_connector_set_orientation_from_panel() + */ drm_connector_set_panel_orientation(connector, p->orientation); return num; @@ -434,12 +440,20 @@ static int panel_simple_get_timings(struct drm_panel *panel, return p->desc->num_timings; } +static enum drm_panel_orientation panel_simple_get_orientation(struct drm_panel *panel) +{ + struct panel_simple *p = to_panel_simple(panel); + + return p->orientation; +} + static const struct drm_panel_funcs panel_simple_funcs = { .disable = panel_simple_disable, .unprepare = panel_simple_unprepare, .prepare = panel_simple_prepare, .enable = panel_simple_enable, .get_modes = panel_simple_get_modes, + .get_orientation = panel_simple_get_orientation, .get_timings = panel_simple_get_timings, }; @@ -663,8 +677,10 @@ static int panel_simple_probe(struct device *dev, const struct panel_desc *desc) drm_panel_init(&panel->base, dev, &panel_simple_funcs, connector_type); err = drm_panel_of_backlight(&panel->base); - if (err) + if (err) { + dev_err_probe(dev, err, "Could not find backlight\n"); goto disable_pm_runtime; + } drm_panel_add(&panel->base); @@ -778,6 +794,36 @@ static const struct panel_desc ampire_am800480r3tmqwa1h = { .bus_format = MEDIA_BUS_FMT_RGB666_1X18, }; +static const struct display_timing ampire_am800600p5tmqw_tb8h_timing = { + .pixelclock = { 34500000, 39600000, 50400000 }, + .hactive = { 800, 800, 800 }, + .hfront_porch = { 12, 112, 312 }, + .hback_porch = { 87, 87, 48 }, + .hsync_len = { 1, 1, 40 }, + .vactive = { 600, 600, 600 }, + .vfront_porch = { 1, 21, 61 }, + .vback_porch = { 38, 38, 19 }, + .vsync_len = { 1, 1, 20 }, + .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | + DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE | + DISPLAY_FLAGS_SYNC_POSEDGE, +}; + +static const struct panel_desc ampire_am800600p5tmqwtb8h = { + .timings = &ire_am800600p5tmqw_tb8h_timing, + .num_timings = 1, + .bpc = 6, + .size = { + .width = 162, + .height = 122, + }, + .bus_format = MEDIA_BUS_FMT_RGB666_1X18, + .bus_flags = DRM_BUS_FLAG_DE_HIGH | + DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE | + DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE, + .connector_type = DRM_MODE_CONNECTOR_DPI, +}; + static const struct display_timing santek_st0700i5y_rbslw_f_timing = { .pixelclock = { 26400000, 33300000, 46800000 }, .hactive = { 800, 800, 800 }, @@ -1427,6 +1473,30 @@ static const struct panel_desc dataimage_fg040346dsswbg04 = { .connector_type = DRM_MODE_CONNECTOR_DPI, }; +static const struct display_timing dataimage_fg1001l0dsswmg01_timing = { + .pixelclock = { 68900000, 71110000, 73400000 }, + .hactive = { 1280, 1280, 1280 }, + .vactive = { 800, 800, 800 }, + .hback_porch = { 100, 100, 100 }, + .hfront_porch = { 100, 100, 100 }, + .vback_porch = { 5, 5, 5 }, + .vfront_porch = { 5, 5, 5 }, + .hsync_len = { 24, 24, 24 }, + .vsync_len = { 3, 3, 3 }, + .flags = DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE | + DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW, +}; + +static const struct panel_desc dataimage_fg1001l0dsswmg01 = { + .timings = &dataimage_fg1001l0dsswmg01_timing, + .num_timings = 1, + .bpc = 8, + .size = { + .width = 217, + .height = 136, + }, +}; + static const struct drm_display_mode dataimage_scf0700c48ggu18_mode = { .clock = 33260, .hdisplay = 800, @@ -1685,6 +1755,32 @@ static const struct panel_desc edt_etm0700g0bdh6 = { .connector_type = DRM_MODE_CONNECTOR_DPI, }; +static const struct display_timing edt_etml0700y5dha_timing = { + .pixelclock = { 40800000, 51200000, 67200000 }, + .hactive = { 1024, 1024, 1024 }, + .hfront_porch = { 30, 106, 125 }, + .hback_porch = { 30, 106, 125 }, + .hsync_len = { 30, 108, 126 }, + .vactive = { 600, 600, 600 }, + .vfront_porch = { 3, 12, 67}, + .vback_porch = { 3, 12, 67 }, + .vsync_len = { 4, 11, 66 }, + .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | + DISPLAY_FLAGS_DE_HIGH, +}; + +static const struct panel_desc edt_etml0700y5dha = { + .timings = &edt_etml0700y5dha_timing, + .num_timings = 1, + .bpc = 8, + .size = { + .width = 155, + .height = 86, + }, + .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, + .connector_type = DRM_MODE_CONNECTOR_LVDS, +}; + static const struct drm_display_mode edt_etmv570g2dhu_mode = { .clock = 25175, .hdisplay = 640, @@ -1953,6 +2049,31 @@ static const struct panel_desc hannstar_hsd100pxn1 = { .connector_type = DRM_MODE_CONNECTOR_LVDS, }; +static const struct display_timing hannstar_hsd101pww2_timing = { + .pixelclock = { 64300000, 71100000, 82000000 }, + .hactive = { 1280, 1280, 1280 }, + .hfront_porch = { 1, 1, 10 }, + .hback_porch = { 1, 1, 10 }, + .hsync_len = { 58, 158, 661 }, + .vactive = { 800, 800, 800 }, + .vfront_porch = { 1, 1, 10 }, + .vback_porch = { 1, 1, 10 }, + .vsync_len = { 1, 21, 203 }, + .flags = DISPLAY_FLAGS_DE_HIGH, +}; + +static const struct panel_desc hannstar_hsd101pww2 = { + .timings = &hannstar_hsd101pww2_timing, + .num_timings = 1, + .bpc = 8, + .size = { + .width = 217, + .height = 136, + }, + .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, + .connector_type = DRM_MODE_CONNECTOR_LVDS, +}; + static const struct drm_display_mode hitachi_tx23d38vm0caa_mode = { .clock = 33333, .hdisplay = 800, @@ -3755,6 +3876,9 @@ static const struct of_device_id platform_of_match[] = { .compatible = "ampire,am800480r3tmqwa1h", .data = &ire_am800480r3tmqwa1h, }, { + .compatible = "ampire,am800600p5tmqw-tb8h", + .data = &ire_am800600p5tmqwtb8h, + }, { .compatible = "arm,rtsm-display", .data = &arm_rtsm, }, { @@ -3833,6 +3957,9 @@ static const struct of_device_id platform_of_match[] = { .compatible = "dataimage,fg040346dsswbg04", .data = &dataimage_fg040346dsswbg04, }, { + .compatible = "dataimage,fg1001l0dsswmg01", + .data = &dataimage_fg1001l0dsswmg01, + }, { .compatible = "dataimage,scf0700c48ggu18", .data = &dataimage_scf0700c48ggu18, }, { @@ -3869,6 +3996,9 @@ static const struct of_device_id platform_of_match[] = { .compatible = "edt,etm0700g0edh6", .data = &edt_etm0700g0bdh6, }, { + .compatible = "edt,etml0700y5dha", + .data = &edt_etml0700y5dha, + }, { .compatible = "edt,etmv570g2dhu", .data = &edt_etmv570g2dhu, }, { @@ -3899,6 +4029,9 @@ static const struct of_device_id platform_of_match[] = { .compatible = "hannstar,hsd100pxn1", .data = &hannstar_hsd100pxn1, }, { + .compatible = "hannstar,hsd101pww2", + .data = &hannstar_hsd101pww2, + }, { .compatible = "hit,tx23d38vm0caa", .data = &hitachi_tx23d38vm0caa }, { diff --git a/drivers/gpu/drm/panel/panel-sony-acx565akm.c b/drivers/gpu/drm/panel/panel-sony-acx565akm.c index 0d7541a33f87..3d6a286056a0 100644 --- a/drivers/gpu/drm/panel/panel-sony-acx565akm.c +++ b/drivers/gpu/drm/panel/panel-sony-acx565akm.c @@ -298,13 +298,7 @@ static void acx565akm_set_brightness(struct acx565akm_panel *lcd, int level) static int acx565akm_bl_update_status_locked(struct backlight_device *dev) { struct acx565akm_panel *lcd = dev_get_drvdata(&dev->dev); - int level; - - if (dev->props.fb_blank == FB_BLANK_UNBLANK && - dev->props.power == FB_BLANK_UNBLANK) - level = dev->props.brightness; - else - level = 0; + int level = backlight_get_brightness(dev); acx565akm_set_brightness(lcd, level); @@ -330,8 +324,7 @@ static int acx565akm_bl_get_intensity(struct backlight_device *dev) mutex_lock(&lcd->mutex); - if (dev->props.fb_blank == FB_BLANK_UNBLANK && - dev->props.power == FB_BLANK_UNBLANK) + if (!backlight_is_blank(dev)) intensity = acx565akm_get_actual_brightness(lcd); else intensity = 0; @@ -349,7 +342,6 @@ static const struct backlight_ops acx565akm_bl_ops = { static int acx565akm_backlight_init(struct acx565akm_panel *lcd) { struct backlight_properties props = { - .fb_blank = FB_BLANK_UNBLANK, .power = FB_BLANK_UNBLANK, .type = BACKLIGHT_RAW, }; |