diff options
Diffstat (limited to 'drivers/gpu/drm/panel')
| -rw-r--r-- | drivers/gpu/drm/panel/Kconfig | 18 | ||||
| -rw-r--r-- | drivers/gpu/drm/panel/Makefile | 2 | ||||
| -rw-r--r-- | drivers/gpu/drm/panel/panel-lvds.c | 5 | ||||
| -rw-r--r-- | drivers/gpu/drm/panel/panel-novatek-nt39016.c | 359 | ||||
| -rw-r--r-- | drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c | 13 | ||||
| -rw-r--r-- | drivers/gpu/drm/panel/panel-raydium-rm67191.c | 668 | ||||
| -rw-r--r-- | drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c | 75 | ||||
| -rw-r--r-- | drivers/gpu/drm/panel/panel-simple.c | 343 |
8 files changed, 1432 insertions, 51 deletions
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index d9d931aa6e26..eaecd40cc32e 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -111,6 +111,15 @@ config DRM_PANEL_LG_LG4573 Say Y here if you want to enable support for LG4573 RGB panel. To compile this driver as a module, choose M here. +config DRM_PANEL_NOVATEK_NT39016 + tristate "Novatek NT39016 RGB/SPI panel" + depends on OF && SPI + depends on BACKLIGHT_CLASS_DEVICE + select REGMAP_SPI + help + Say Y here if you want to enable support for the panels built + around the Novatek NT39016 display controller. + config DRM_PANEL_OLIMEX_LCD_OLINUXINO tristate "Olimex LCD-OLinuXino panel" depends on OF @@ -159,6 +168,15 @@ config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN Pi 7" Touchscreen. To compile this driver as a module, choose M here. +config DRM_PANEL_RAYDIUM_RM67191 + tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to enable support for Raydium RM67191 FHD + (1080x1920) DSI panel. + config DRM_PANEL_RAYDIUM_RM68200 tristate "Raydium RM68200 720x1280 DSI video mode panel" depends on OF diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index fb0cb3aaa9e6..62dae45f8f74 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -9,11 +9,13 @@ obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o obj-$(CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04) += panel-kingdisplay-kd097d04.o obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o +obj-$(CONFIG_DRM_PANEL_NOVATEK_NT39016) += panel-novatek-nt39016.o obj-$(CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO) += panel-olimex-lcd-olinuxino.o obj-$(CONFIG_DRM_PANEL_ORISETECH_OTM8009A) += panel-orisetech-otm8009a.o obj-$(CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS) += panel-osd-osd101t2587-53ts.o obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o obj-$(CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN) += panel-raspberrypi-touchscreen.o +obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM67191) += panel-raydium-rm67191.o obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM68200) += panel-raydium-rm68200.o obj-$(CONFIG_DRM_PANEL_ROCKTECH_JH057N00900) += panel-rocktech-jh057n00900.o obj-$(CONFIG_DRM_PANEL_RONBO_RB070D30) += panel-ronbo-rb070d30.o diff --git a/drivers/gpu/drm/panel/panel-lvds.c b/drivers/gpu/drm/panel/panel-lvds.c index 1ec57d0806a8..ad47cc95459e 100644 --- a/drivers/gpu/drm/panel/panel-lvds.c +++ b/drivers/gpu/drm/panel/panel-lvds.c @@ -147,8 +147,11 @@ static int panel_lvds_parse_dt(struct panel_lvds *lvds) int ret; ret = of_get_display_timing(np, "panel-timing", &timing); - if (ret < 0) + if (ret < 0) { + dev_err(lvds->dev, "%pOF: problems parsing panel-timing (%d)\n", + np, ret); return ret; + } videomode_from_timing(&timing, &lvds->video_mode); diff --git a/drivers/gpu/drm/panel/panel-novatek-nt39016.c b/drivers/gpu/drm/panel/panel-novatek-nt39016.c new file mode 100644 index 000000000000..2ad1063b068d --- /dev/null +++ b/drivers/gpu/drm/panel/panel-novatek-nt39016.c @@ -0,0 +1,359 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Novatek NT39016 TFT LCD panel driver + * + * Copyright (C) 2017, Maarten ter Huurne <maarten@treewalker.org> + * Copyright (C) 2019, Paul Cercueil <paul@crapouillou.net> + */ + +#include <linux/backlight.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/gpio/consumer.h> +#include <linux/media-bus-format.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/spi/spi.h> + +#include <drm/drm_modes.h> +#include <drm/drm_panel.h> + +enum nt39016_regs { + NT39016_REG_SYSTEM, + NT39016_REG_TIMING, + NT39016_REG_OP, + NT39016_REG_DATA_IN, + NT39016_REG_SRC_TIMING_DELAY, + NT39016_REG_GATE_TIMING_DELAY, + NT39016_REG_RESERVED, + NT39016_REG_INITIAL_FUNC, + NT39016_REG_CONTRAST, + NT39016_REG_BRIGHTNESS, + NT39016_REG_HUE_SATURATION, + NT39016_REG_RB_SUBCONTRAST, + NT39016_REG_R_SUBBRIGHTNESS, + NT39016_REG_B_SUBBRIGHTNESS, + NT39016_REG_VCOMDC, + NT39016_REG_VCOMAC, + NT39016_REG_VGAM2, + NT39016_REG_VGAM34, + NT39016_REG_VGAM56, + NT39016_REG_VCOMDC_TRIM = 0x1e, + NT39016_REG_DISPLAY_MODE = 0x20, +}; + +#define NT39016_SYSTEM_RESET_N BIT(0) +#define NT39016_SYSTEM_STANDBY BIT(1) + +struct nt39016_panel_info { + struct drm_display_mode display_mode; + u16 width_mm, height_mm; + u32 bus_format, bus_flags; +}; + +struct nt39016 { + struct drm_panel drm_panel; + struct device *dev; + struct regmap *map; + struct regulator *supply; + const struct nt39016_panel_info *panel_info; + + struct gpio_desc *reset_gpio; + + struct backlight_device *backlight; +}; + +static inline struct nt39016 *to_nt39016(struct drm_panel *panel) +{ + return container_of(panel, struct nt39016, drm_panel); +} + +#define RV(REG, VAL) { .reg = (REG), .def = (VAL), .delay_us = 2 } +static const struct reg_sequence nt39016_panel_regs[] = { + RV(NT39016_REG_SYSTEM, 0x00), + RV(NT39016_REG_TIMING, 0x00), + RV(NT39016_REG_OP, 0x03), + RV(NT39016_REG_DATA_IN, 0xCC), + RV(NT39016_REG_SRC_TIMING_DELAY, 0x46), + RV(NT39016_REG_GATE_TIMING_DELAY, 0x05), + RV(NT39016_REG_RESERVED, 0x00), + RV(NT39016_REG_INITIAL_FUNC, 0x00), + RV(NT39016_REG_CONTRAST, 0x08), + RV(NT39016_REG_BRIGHTNESS, 0x40), + RV(NT39016_REG_HUE_SATURATION, 0x88), + RV(NT39016_REG_RB_SUBCONTRAST, 0x88), + RV(NT39016_REG_R_SUBBRIGHTNESS, 0x20), + RV(NT39016_REG_B_SUBBRIGHTNESS, 0x20), + RV(NT39016_REG_VCOMDC, 0x67), + RV(NT39016_REG_VCOMAC, 0xA4), + RV(NT39016_REG_VGAM2, 0x04), + RV(NT39016_REG_VGAM34, 0x24), + RV(NT39016_REG_VGAM56, 0x24), + RV(NT39016_REG_DISPLAY_MODE, 0x00), +}; + +#undef RV + +static const struct regmap_range nt39016_regmap_no_ranges[] = { + regmap_reg_range(0x13, 0x1D), + regmap_reg_range(0x1F, 0x1F), +}; + +static const struct regmap_access_table nt39016_regmap_access_table = { + .no_ranges = nt39016_regmap_no_ranges, + .n_no_ranges = ARRAY_SIZE(nt39016_regmap_no_ranges), +}; + +static const struct regmap_config nt39016_regmap_config = { + .reg_bits = 6, + .pad_bits = 2, + .val_bits = 8, + + .max_register = NT39016_REG_DISPLAY_MODE, + .wr_table = &nt39016_regmap_access_table, + .write_flag_mask = 0x02, + + .cache_type = REGCACHE_FLAT, +}; + +static int nt39016_prepare(struct drm_panel *drm_panel) +{ + struct nt39016 *panel = to_nt39016(drm_panel); + int err; + + err = regulator_enable(panel->supply); + if (err) { + dev_err(panel->dev, "Failed to enable power supply: %d", err); + return err; + } + + /* + * Reset the NT39016. + * The documentation says the reset pulse should be at least 40 us to + * pass the glitch filter, but when testing I see some resets fail and + * some succeed when using a 70 us delay, so we use 100 us instead. + */ + gpiod_set_value_cansleep(panel->reset_gpio, 1); + usleep_range(100, 1000); + gpiod_set_value_cansleep(panel->reset_gpio, 0); + udelay(2); + + /* Init all registers. */ + err = regmap_multi_reg_write(panel->map, nt39016_panel_regs, + ARRAY_SIZE(nt39016_panel_regs)); + if (err) { + dev_err(panel->dev, "Failed to init registers: %d", err); + goto err_disable_regulator; + } + + return 0; + +err_disable_regulator: + regulator_disable(panel->supply); + return err; +} + +static int nt39016_unprepare(struct drm_panel *drm_panel) +{ + struct nt39016 *panel = to_nt39016(drm_panel); + + gpiod_set_value_cansleep(panel->reset_gpio, 1); + + regulator_disable(panel->supply); + + return 0; +} + +static int nt39016_enable(struct drm_panel *drm_panel) +{ + struct nt39016 *panel = to_nt39016(drm_panel); + int ret; + + ret = regmap_write(panel->map, NT39016_REG_SYSTEM, + NT39016_SYSTEM_RESET_N | NT39016_SYSTEM_STANDBY); + if (ret) { + dev_err(panel->dev, "Unable to enable panel: %d", ret); + return ret; + } + + if (panel->backlight) { + /* Wait for the picture to be ready before enabling backlight */ + msleep(150); + + ret = backlight_enable(panel->backlight); + } + + return ret; +} + +static int nt39016_disable(struct drm_panel *drm_panel) +{ + struct nt39016 *panel = to_nt39016(drm_panel); + int err; + + backlight_disable(panel->backlight); + + err = regmap_write(panel->map, NT39016_REG_SYSTEM, + NT39016_SYSTEM_RESET_N); + if (err) { + dev_err(panel->dev, "Unable to disable panel: %d", err); + return err; + } + + return 0; +} + +static int nt39016_get_modes(struct drm_panel *drm_panel) +{ + struct nt39016 *panel = to_nt39016(drm_panel); + const struct nt39016_panel_info *panel_info = panel->panel_info; + struct drm_connector *connector = drm_panel->connector; + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(drm_panel->drm, &panel_info->display_mode); + if (!mode) + return -ENOMEM; + + drm_mode_set_name(mode); + + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + drm_mode_probed_add(connector, mode); + + connector->display_info.bpc = 8; + connector->display_info.width_mm = panel_info->width_mm; + connector->display_info.height_mm = panel_info->height_mm; + + drm_display_info_set_bus_formats(&connector->display_info, + &panel_info->bus_format, 1); + connector->display_info.bus_flags = panel_info->bus_flags; + + return 1; +} + +static const struct drm_panel_funcs nt39016_funcs = { + .prepare = nt39016_prepare, + .unprepare = nt39016_unprepare, + .enable = nt39016_enable, + .disable = nt39016_disable, + .get_modes = nt39016_get_modes, +}; + +static int nt39016_probe(struct spi_device *spi) +{ + struct device *dev = &spi->dev; + struct nt39016 *panel; + int err; + + panel = devm_kzalloc(dev, sizeof(*panel), GFP_KERNEL); + if (!panel) + return -ENOMEM; + + panel->dev = dev; + spi_set_drvdata(spi, panel); + + panel->panel_info = of_device_get_match_data(dev); + if (!panel->panel_info) + return -EINVAL; + + panel->supply = devm_regulator_get(dev, "power"); + if (IS_ERR(panel->supply)) { + dev_err(dev, "Failed to get power supply"); + return PTR_ERR(panel->supply); + } + + panel->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(panel->reset_gpio)) { + dev_err(dev, "Failed to get reset GPIO"); + return PTR_ERR(panel->reset_gpio); + } + + spi->bits_per_word = 8; + spi->mode = SPI_MODE_3 | SPI_3WIRE; + err = spi_setup(spi); + if (err) { + dev_err(dev, "Failed to setup SPI"); + return err; + } + + panel->map = devm_regmap_init_spi(spi, &nt39016_regmap_config); + if (IS_ERR(panel->map)) { + dev_err(dev, "Failed to init regmap"); + return PTR_ERR(panel->map); + } + + panel->backlight = devm_of_find_backlight(dev); + if (IS_ERR(panel->backlight)) { + err = PTR_ERR(panel->backlight); + if (err != -EPROBE_DEFER) + dev_err(dev, "Failed to get backlight handle"); + return err; + } + + drm_panel_init(&panel->drm_panel); + panel->drm_panel.dev = dev; + panel->drm_panel.funcs = &nt39016_funcs; + + err = drm_panel_add(&panel->drm_panel); + if (err < 0) { + dev_err(dev, "Failed to register panel"); + return err; + } + + return 0; +} + +static int nt39016_remove(struct spi_device *spi) +{ + struct nt39016 *panel = spi_get_drvdata(spi); + + drm_panel_remove(&panel->drm_panel); + + nt39016_disable(&panel->drm_panel); + nt39016_unprepare(&panel->drm_panel); + + return 0; +} + +static const struct nt39016_panel_info kd035g6_info = { + .display_mode = { + .clock = 6000, + .hdisplay = 320, + .hsync_start = 320 + 10, + .hsync_end = 320 + 10 + 50, + .htotal = 320 + 10 + 50 + 20, + .vdisplay = 240, + .vsync_start = 240 + 5, + .vsync_end = 240 + 5 + 1, + .vtotal = 240 + 5 + 1 + 4, + .vrefresh = 60, + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, + }, + .width_mm = 71, + .height_mm = 53, + .bus_format = MEDIA_BUS_FMT_RGB888_1X24, + .bus_flags = DRM_BUS_FLAG_PIXDATA_NEGEDGE, +}; + +static const struct of_device_id nt39016_of_match[] = { + { .compatible = "kingdisplay,kd035g6-54nt", .data = &kd035g6_info }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, nt39016_of_match); + +static struct spi_driver nt39016_driver = { + .driver = { + .name = "nt39016", + .of_match_table = nt39016_of_match, + }, + .probe = nt39016_probe, + .remove = nt39016_remove, +}; + +module_spi_driver(nt39016_driver); + +MODULE_AUTHOR("Maarten ter Huurne <maarten@treewalker.org>"); +MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c index 28c0620dfe0f..b5b14aa059ea 100644 --- a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c +++ b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c @@ -399,7 +399,13 @@ static int rpi_touchscreen_probe(struct i2c_client *i2c, /* Look up the DSI host. It needs to probe before we do. */ endpoint = of_graph_get_next_endpoint(dev->of_node, NULL); + if (!endpoint) + return -ENODEV; + dsi_host_node = of_graph_get_remote_port_parent(endpoint); + if (!dsi_host_node) + goto error; + host = of_find_mipi_dsi_host_by_node(dsi_host_node); of_node_put(dsi_host_node); if (!host) { @@ -408,6 +414,9 @@ static int rpi_touchscreen_probe(struct i2c_client *i2c, } info.node = of_graph_get_remote_port(endpoint); + if (!info.node) + goto error; + of_node_put(endpoint); ts->dsi = mipi_dsi_device_register_full(host, &info); @@ -428,6 +437,10 @@ static int rpi_touchscreen_probe(struct i2c_client *i2c, return ret; return 0; + +error: + of_node_put(endpoint); + return -ENODEV; } static int rpi_touchscreen_remove(struct i2c_client *i2c) diff --git a/drivers/gpu/drm/panel/panel-raydium-rm67191.c b/drivers/gpu/drm/panel/panel-raydium-rm67191.c new file mode 100644 index 000000000000..6a5d37006103 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-raydium-rm67191.c @@ -0,0 +1,668 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Raydium RM67191 MIPI-DSI panel driver + * + * Copyright 2019 NXP + */ + +#include <linux/backlight.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regulator/consumer.h> + +#include <video/mipi_display.h> +#include <video/of_videomode.h> +#include <video/videomode.h> + +#include <drm/drm_crtc.h> +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_panel.h> +#include <drm/drm_print.h> + +/* Panel specific color-format bits */ +#define COL_FMT_16BPP 0x55 +#define COL_FMT_18BPP 0x66 +#define COL_FMT_24BPP 0x77 + +/* Write Manufacture Command Set Control */ +#define WRMAUCCTR 0xFE + +/* Manufacturer Command Set pages (CMD2) */ +struct cmd_set_entry { + u8 cmd; + u8 param; +}; + +/* + * There is no description in the Reference Manual about these commands. + * We received them from vendor, so just use them as is. + */ +static const struct cmd_set_entry manufacturer_cmd_set[] = { + {0xFE, 0x0B}, + {0x28, 0x40}, + {0x29, 0x4F}, + {0xFE, 0x0E}, + {0x4B, 0x00}, + {0x4C, 0x0F}, + {0x4D, 0x20}, + {0x4E, 0x40}, + {0x4F, 0x60}, + {0x50, 0xA0}, + {0x51, 0xC0}, + {0x52, 0xE0}, + {0x53, 0xFF}, + {0xFE, 0x0D}, + {0x18, 0x08}, + {0x42, 0x00}, + {0x08, 0x41}, + {0x46, 0x02}, + {0x72, 0x09}, + {0xFE, 0x0A}, + {0x24, 0x17}, + {0x04, 0x07}, + {0x1A, 0x0C}, + {0x0F, 0x44}, + {0xFE, 0x04}, + {0x00, 0x0C}, + {0x05, 0x08}, + {0x06, 0x08}, + {0x08, 0x08}, + {0x09, 0x08}, + {0x0A, 0xE6}, + {0x0B, 0x8C}, + {0x1A, 0x12}, + {0x1E, 0xE0}, + {0x29, 0x93}, + {0x2A, 0x93}, + {0x2F, 0x02}, + {0x31, 0x02}, + {0x33, 0x05}, + {0x37, 0x2D}, + {0x38, 0x2D}, + {0x3A, 0x1E}, + {0x3B, 0x1E}, + {0x3D, 0x27}, + {0x3F, 0x80}, + {0x40, 0x40}, + {0x41, 0xE0}, + {0x4F, 0x2F}, + {0x50, 0x1E}, + {0xFE, 0x06}, + {0x00, 0xCC}, + {0x05, 0x05}, + {0x07, 0xA2}, + {0x08, 0xCC}, + {0x0D, 0x03}, + {0x0F, 0xA2}, + {0x32, 0xCC}, + {0x37, 0x05}, + {0x39, 0x83}, + {0x3A, 0xCC}, + {0x41, 0x04}, + {0x43, 0x83}, + {0x44, 0xCC}, + {0x49, 0x05}, + {0x4B, 0xA2}, + {0x4C, 0xCC}, + {0x51, 0x03}, + {0x53, 0xA2}, + {0x75, 0xCC}, + {0x7A, 0x03}, + {0x7C, 0x83}, + {0x7D, 0xCC}, + {0x82, 0x02}, + {0x84, 0x83}, + {0x85, 0xEC}, + {0x86, 0x0F}, + {0x87, 0xFF}, + {0x88, 0x00}, + {0x8A, 0x02}, + {0x8C, 0xA2}, + {0x8D, 0xEA}, + {0x8E, 0x01}, + {0x8F, 0xE8}, + {0xFE, 0x06}, + {0x90, 0x0A}, + {0x92, 0x06}, + {0x93, 0xA0}, + {0x94, 0xA8}, + {0x95, 0xEC}, + {0x96, 0x0F}, + {0x97, 0xFF}, + {0x98, 0x00}, + {0x9A, 0x02}, + {0x9C, 0xA2}, + {0xAC, 0x04}, + {0xFE, 0x06}, + {0xB1, 0x12}, + {0xB2, 0x17}, + {0xB3, 0x17}, + {0xB4, 0x17}, + {0xB5, 0x17}, + {0xB6, 0x11}, + {0xB7, 0x08}, + {0xB8, 0x09}, + {0xB9, 0x06}, + {0xBA, 0x07}, + {0xBB, 0x17}, + {0xBC, 0x17}, + {0xBD, 0x17}, + {0xBE, 0x17}, + {0xBF, 0x17}, + {0xC0, 0x17}, + {0xC1, 0x17}, + {0xC2, 0x17}, + {0xC3, 0x17}, + {0xC4, 0x0F}, + {0xC5, 0x0E}, + {0xC6, 0x00}, + {0xC7, 0x01}, + {0xC8, 0x10}, + {0xFE, 0x06}, + {0x95, 0xEC}, + {0x8D, 0xEE}, + {0x44, 0xEC}, + {0x4C, 0xEC}, + {0x32, 0xEC}, + {0x3A, 0xEC}, + {0x7D, 0xEC}, + {0x75, 0xEC}, + {0x00, 0xEC}, + {0x08, 0xEC}, + {0x85, 0xEC}, + {0xA6, 0x21}, + {0xA7, 0x05}, + {0xA9, 0x06}, + {0x82, 0x06}, + {0x41, 0x06}, + {0x7A, 0x07}, + {0x37, 0x07}, + {0x05, 0x06}, + {0x49, 0x06}, + {0x0D, 0x04}, + {0x51, 0x04}, +}; + +static const u32 rad_bus_formats[] = { + MEDIA_BUS_FMT_RGB888_1X24, + MEDIA_BUS_FMT_RGB666_1X18, + MEDIA_BUS_FMT_RGB565_1X16, +}; + +static const u32 rad_bus_flags = DRM_BUS_FLAG_DE_LOW | + DRM_BUS_FLAG_PIXDATA_NEGEDGE; + +struct rad_panel { + struct drm_panel panel; + struct mipi_dsi_device *dsi; + + struct gpio_desc *reset; + struct backlight_device *backlight; + + struct regulator_bulk_data *supplies; + unsigned int num_supplies; + + bool prepared; + bool enabled; +}; + +static const struct drm_display_mode default_mode = { + .clock = 132000, + .hdisplay = 1080, + .hsync_start = 1080 + 20, + .hsync_end = 1080 + 20 + 2, + .htotal = 1080 + 20 + 2 + 34, + .vdisplay = 1920, + .vsync_start = 1920 + 10, + .vsync_end = 1920 + 10 + 2, + .vtotal = 1920 + 10 + 2 + 4, + .vrefresh = 60, + .width_mm = 68, + .height_mm = 121, + .flags = DRM_MODE_FLAG_NHSYNC | + DRM_MODE_FLAG_NVSYNC, +}; + +static inline struct rad_panel *to_rad_panel(struct drm_panel *panel) +{ + return container_of(panel, struct rad_panel, panel); +} + +static int rad_panel_push_cmd_list(struct mipi_dsi_device *dsi) +{ + size_t i; + size_t count = ARRAY_SIZE(manufacturer_cmd_set); + int ret = 0; + + for (i = 0; i < count; i++) { + const struct cmd_set_entry *entry = &manufacturer_cmd_set[i]; + u8 buffer[2] = { entry->cmd, entry->param }; + + ret = mipi_dsi_generic_write(dsi, &buffer, sizeof(buffer)); + if (ret < 0) + return ret; + } + + return ret; +}; + +static int color_format_from_dsi_format(enum mipi_dsi_pixel_format format) +{ + switch (format) { + case MIPI_DSI_FMT_RGB565: + return COL_FMT_16BPP; + case MIPI_DSI_FMT_RGB666: + case MIPI_DSI_FMT_RGB666_PACKED: + return COL_FMT_18BPP; + case MIPI_DSI_FMT_RGB888: + return COL_FMT_24BPP; + default: + return COL_FMT_24BPP; /* for backward compatibility */ + } +}; + +static int rad_panel_prepare(struct drm_panel *panel) +{ + struct rad_panel *rad = to_rad_panel(panel); + int ret; + + if (rad->prepared) + return 0; + + ret = regulator_bulk_enable(rad->num_supplies, rad->supplies); + if (ret) + return ret; + + if (rad->reset) { + gpiod_set_value_cansleep(rad->reset, 1); + usleep_range(3000, 5000); + gpiod_set_value_cansleep(rad->reset, 0); + usleep_range(18000, 20000); + } + + rad->prepared = true; + + return 0; +} + +static int rad_panel_unprepare(struct drm_panel *panel) +{ + struct rad_panel *rad = to_rad_panel(panel); + int ret; + + if (!rad->prepared) + return 0; + + /* + * Right after asserting the reset, we need to release it, so that the + * touch driver can have an active connection with the touch controller + * even after the display is turned off. + */ + if (rad->reset) { + gpiod_set_value_cansleep(rad->reset, 1); + usleep_range(15000, 17000); + gpiod_set_value_cansleep(rad->reset, 0); + } + + ret = regulator_bulk_disable(rad->num_supplies, rad->supplies); + if (ret) + return ret; + + rad->prepared = false; + + return 0; +} + +static int rad_panel_enable(struct drm_panel *panel) +{ + struct rad_panel *rad = to_rad_panel(panel); + struct mipi_dsi_device *dsi = rad->dsi; + struct device *dev = &dsi->dev; + int color_format = color_format_from_dsi_format(dsi->format); + int ret; + + if (rad->enabled) + return 0; + + dsi->mode_flags |= MIPI_DSI_MODE_LPM; + + ret = rad_panel_push_cmd_list(dsi); + if (ret < 0) { + DRM_DEV_ERROR(dev, "Failed to send MCS (%d)\n", ret); + goto fail; + } + + /* Select User Command Set table (CMD1) */ + ret = mipi_dsi_generic_write(dsi, (u8[]){ WRMAUCCTR, 0x00 }, 2); + if (ret < 0) + goto fail; + + /* Software reset */ + ret = mipi_dsi_dcs_soft_reset(dsi); + if (ret < 0) { + DRM_DEV_ERROR(dev, "Failed to do Software Reset (%d)\n", ret); + goto fail; + } + + usleep_range(15000, 17000); + + /* Set DSI mode */ + ret = mipi_dsi_generic_write(dsi, (u8[]){ 0xC2, 0x0B }, 2); + if (ret < 0) { + DRM_DEV_ERROR(dev, "Failed to set DSI mode (%d)\n", ret); + goto fail; + } + /* Set tear ON */ + ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK); + if (ret < 0) { + DRM_DEV_ERROR(dev, "Failed to set tear ON (%d)\n", ret); + goto fail; + } + /* Set tear scanline */ + ret = mipi_dsi_dcs_set_tear_scanline(dsi, 0x380); + if (ret < 0) { + DRM_DEV_ERROR(dev, "Failed to set tear scanline (%d)\n", ret); + goto fail; + } + /* Set pixel format */ + ret = mipi_dsi_dcs_set_pixel_format(dsi, color_format); + DRM_DEV_DEBUG_DRIVER(dev, "Interface color format set to 0x%x\n", + color_format); + if (ret < 0) { + DRM_DEV_ERROR(dev, "Failed to set pixel format (%d)\n", ret); + goto fail; + } + /* Exit sleep mode */ + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); + if (ret < 0) { + DRM_DEV_ERROR(dev, "Failed to exit sleep mode (%d)\n", ret); + goto fail; + } + + usleep_range(5000, 7000); + + ret = mipi_dsi_dcs_set_display_on(dsi); + if (ret < 0) { + DRM_DEV_ERROR(dev, "Failed to set display ON (%d)\n", ret); + goto fail; + } + + backlight_enable(rad->backlight); + + rad->enabled = true; + + return 0; + +fail: + gpiod_set_value_cansleep(rad->reset, 1); + + return ret; +} + +static int rad_panel_disable(struct drm_panel *panel) +{ + struct rad_panel *rad = to_rad_panel(panel); + struct mipi_dsi_device *dsi = rad->dsi; + struct device *dev = &dsi->dev; + int ret; + + if (!rad->enabled) + return 0; + + dsi->mode_flags |= MIPI_DSI_MODE_LPM; + + backlight_disable(rad->backlight); + + usleep_range(10000, 12000); + + ret = mipi_dsi_dcs_set_display_off(dsi); + if (ret < 0) { + DRM_DEV_ERROR(dev, "Failed to set display OFF (%d)\n", ret); + return ret; + } + + usleep_range(5000, 10000); + + ret = mipi_dsi_dcs_enter_sleep_mode(dsi); + if (ret < 0) { + DRM_DEV_ERROR(dev, "Failed to enter sleep mode (%d)\n", ret); + return ret; + } + + rad->enabled = false; + + return 0; +} + +static int rad_panel_get_modes(struct drm_panel *panel) +{ + struct drm_connector *connector = panel->connector; + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(panel->drm, &default_mode); + if (!mode) { + DRM_DEV_ERROR(panel->dev, "failed to add mode %ux%ux@%u\n", + default_mode.hdisplay, default_mode.vdisplay, + default_mode.vrefresh); + return -ENOMEM; + } + + drm_mode_set_name(mode); + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + drm_mode_probed_add(panel->connector, mode); + + connector->display_info.width_mm = mode->width_mm; + connector->display_info.height_mm = mode->height_mm; + connector->display_info.bus_flags = rad_bus_flags; + + drm_display_info_set_bus_formats(&connector->display_info, + rad_bus_formats, + ARRAY_SIZE(rad_bus_formats)); + return 1; +} + +static int rad_bl_get_brightness(struct backlight_device *bl) +{ + struct mipi_dsi_device *dsi = bl_get_data(bl); + struct rad_panel *rad = mipi_dsi_get_drvdata(dsi); + u16 brightness; + int ret; + + if (!rad->prepared) + return 0; + + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; + + ret = mipi_dsi_dcs_get_display_brightness(dsi, &brightness); + if (ret < 0) + return ret; + + bl->props.brightness = brightness; + + return brightness & 0xff; +} + +static int rad_bl_update_status(struct backlight_device *bl) +{ + struct mipi_dsi_device *dsi = bl_get_data(bl); + struct rad_panel *rad = mipi_dsi_get_drvdata(dsi); + int ret = 0; + + if (!rad->prepared) + return 0; + + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; + + ret = mipi_dsi_dcs_set_display_brightness(dsi, bl->props.brightness); + if (ret < 0) + return ret; + + return 0; +} + +static const struct backlight_ops rad_bl_ops = { + .update_status = rad_bl_update_status, + .get_brightness = rad_bl_get_brightness, +}; + +static const struct drm_panel_funcs rad_panel_funcs = { + .prepare = rad_panel_prepare, + .unprepare = rad_panel_unprepare, + .enable = rad_panel_enable, + .disable = rad_panel_disable, + .get_modes = rad_panel_get_modes, +}; + +static const char * const rad_supply_names[] = { + "v3p3", + "v1p8", +}; + +static int rad_init_regulators(struct rad_panel *rad) +{ + struct device *dev = &rad->dsi->dev; + int i; + + rad->num_supplies = ARRAY_SIZE(rad_supply_names); + rad->supplies = devm_kcalloc(dev, rad->num_supplies, + sizeof(*rad->supplies), GFP_KERNEL); + if (!rad->supplies) + return -ENOMEM; + + for (i = 0; i < rad->num_supplies; i++) + rad->supplies[i].supply = rad_supply_names[i]; + + return devm_regulator_bulk_get(dev, rad->num_supplies, rad->supplies); +}; + +static int rad_panel_probe(struct mipi_dsi_device *dsi) +{ + struct device *dev = &dsi->dev; + struct device_node *np = dev->of_node; + struct rad_panel *panel; + struct backlight_properties bl_props; + int ret; + u32 video_mode; + + panel = devm_kzalloc(&dsi->dev, sizeof(*panel), GFP_KERNEL); + if (!panel) + return -ENOMEM; + + mipi_dsi_set_drvdata(dsi, panel); + + panel->dsi = dsi; + + dsi->format = MIPI_DSI_FMT_RGB888; + dsi->mode_flags = MIPI_DSI_MODE_VIDEO_HSE | MIPI_DSI_MODE_VIDEO | + MIPI_DSI_CLOCK_NON_CONTINUOUS; + + ret = of_property_read_u32(np, "video-mode", &video_mode); + if (!ret) { + switch (video_mode) { + case 0: + /* burst mode */ + dsi->mode_flags |= MIPI_DSI_MODE_VIDEO_BURST; + break; + case 1: + /* non-burst mode with sync event */ + break; + case 2: + /* non-burst mode with sync pulse */ + dsi->mode_flags |= MIPI_DSI_MODE_VIDEO_SYNC_PULSE; + break; + default: + dev_warn(dev, "invalid video mode %d\n", video_mode); + break; + } + } + + ret = of_property_read_u32(np, "dsi-lanes", &dsi->lanes); + if (ret) { + dev_err(dev, "Failed to get dsi-lanes property (%d)\n", ret); + return ret; + } + + panel->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(panel->reset)) + return PTR_ERR(panel->reset); + + memset(&bl_props, 0, sizeof(bl_props)); + bl_props.type = BACKLIGHT_RAW; + bl_props.brightness = 255; + bl_props.max_brightness = 255; + + panel->backlight = devm_backlight_device_register(dev, dev_name(dev), + dev, dsi, &rad_bl_ops, + &bl_props); + if (IS_ERR(panel->backlight)) { + ret = PTR_ERR(panel->backlight); + dev_err(dev, "Failed to register backlight (%d)\n", ret); + return ret; + } + + ret = rad_init_regulators(panel); + if (ret) + return ret; + + drm_panel_init(&panel->panel); + panel->panel.funcs = &rad_panel_funcs; + panel->panel.dev = dev; + dev_set_drvdata(dev, panel); + + ret = drm_panel_add(&panel->panel); + if (ret) + return ret; + + ret = mipi_dsi_attach(dsi); + if (ret) + drm_panel_remove(&panel->panel); + + return ret; +} + +static int rad_panel_remove(struct mipi_dsi_device *dsi) +{ + struct rad_panel *rad = mipi_dsi_get_drvdata(dsi); + struct device *dev = &dsi->dev; + int ret; + + ret = mipi_dsi_detach(dsi); + if (ret) + DRM_DEV_ERROR(dev, "Failed to detach from host (%d)\n", + ret); + + drm_panel_remove(&rad->panel); + + return 0; +} + +static void rad_panel_shutdown(struct mipi_dsi_device *dsi) +{ + struct rad_panel *rad = mipi_dsi_get_drvdata(dsi); + + rad_panel_disable(&rad->panel); + rad_panel_unprepare(&rad->panel); +} + +static const struct of_device_id rad_of_match[] = { + { .compatible = "raydium,rm67191", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, rad_of_match); + +static struct mipi_dsi_driver rad_panel_driver = { + .driver = { + .name = "panel-raydium-rm67191", + .of_match_table = rad_of_match, + }, + .probe = rad_panel_probe, + .remove = rad_panel_remove, + .shutdown = rad_panel_shutdown, +}; +module_mipi_dsi_driver(rad_panel_driver); + +MODULE_AUTHOR("Robert Chiras <robert.chiras@nxp.com>"); +MODULE_DESCRIPTION("DRM Driver for Raydium RM67191 MIPI DSI panel"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c b/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c index 6dcb692c4701..b9109922397f 100644 --- a/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c +++ b/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c @@ -15,6 +15,7 @@ #include <linux/gpio/consumer.h> #include <linux/media-bus-format.h> #include <linux/module.h> +#include <linux/regulator/consumer.h> #include <video/display_timing.h> #include <video/mipi_display.h> @@ -33,6 +34,7 @@ #define ST7703_CMD_SETEXTC 0xB9 #define ST7703_CMD_SETMIPI 0xBA #define ST7703_CMD_SETVDC 0xBC +#define ST7703_CMD_UNKNOWN0 0xBF #define ST7703_CMD_SETSCR 0xC0 #define ST7703_CMD_SETPOWER 0xC1 #define ST7703_CMD_SETPANEL 0xCC @@ -46,6 +48,8 @@ struct jh057n { struct drm_panel panel; struct gpio_desc *reset_gpio; struct backlight_device *backlight; + struct regulator *vcc; + struct regulator *iovcc; bool prepared; struct dentry *debugfs; @@ -94,7 +98,7 @@ static int jh057n_init_sequence(struct jh057n *ctx) msleep(20); dsi_generic_write_seq(dsi, ST7703_CMD_SETVCOM, 0x3F, 0x3F); - dsi_generic_write_seq(dsi, 0xBF, 0x02, 0x11, 0x00); + dsi_generic_write_seq(dsi, ST7703_CMD_UNKNOWN0, 0x02, 0x11, 0x00); dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP1, 0x82, 0x10, 0x06, 0x05, 0x9E, 0x0A, 0xA5, 0x12, 0x31, 0x23, 0x37, 0x83, 0x04, 0xBC, 0x27, 0x38, @@ -123,7 +127,7 @@ static int jh057n_init_sequence(struct jh057n *ctx) ret = mipi_dsi_dcs_exit_sleep_mode(dsi); if (ret < 0) { - DRM_DEV_ERROR(dev, "Failed to exit sleep mode\n"); + DRM_DEV_ERROR(dev, "Failed to exit sleep mode: %d\n", ret); return ret; } /* Panel is operational 120 msec after reset */ @@ -139,6 +143,14 @@ static int jh057n_init_sequence(struct jh057n *ctx) static int jh057n_enable(struct drm_panel *panel) { struct jh057n *ctx = panel_to_jh057n(panel); + int ret; + + ret = jh057n_init_sequence(ctx); + if (ret < 0) { + DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d\n", + ret); + return ret; + } return backlight_enable(ctx->backlight); } @@ -146,19 +158,21 @@ static int jh057n_enable(struct drm_panel *panel) static int jh057n_disable(struct drm_panel *panel) { struct jh057n *ctx = panel_to_jh057n(panel); + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); - return backlight_disable(ctx->backlight); + backlight_disable(ctx->backlight); + return mipi_dsi_dcs_set_display_off(dsi); } static int jh057n_unprepare(struct drm_panel *panel) { struct jh057n *ctx = panel_to_jh057n(panel); - struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); if (!ctx->prepared) return 0; - mipi_dsi_dcs_set_display_off(dsi); + regulator_disable(ctx->iovcc); + regulator_disable(ctx->vcc); ctx->prepared = false; return 0; @@ -173,21 +187,31 @@ static int jh057n_prepare(struct drm_panel *panel) return 0; DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel\n"); + ret = regulator_enable(ctx->vcc); + if (ret < 0) { + DRM_DEV_ERROR(ctx->dev, + "Failed to enable vcc supply: %d\n", ret); + return ret; + } + ret = regulator_enable(ctx->iovcc); + if (ret < 0) { + DRM_DEV_ERROR(ctx->dev, + "Failed to enable iovcc supply: %d\n", ret); + goto disable_vcc; + } + gpiod_set_value_cansleep(ctx->reset_gpio, 1); usleep_range(20, 40); gpiod_set_value_cansleep(ctx->reset_gpio, 0); msleep(20); - ret = jh057n_init_sequence(ctx); - if (ret < 0) { - DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d\n", - ret); - return ret; - } - ctx->prepared = true; return 0; + +disable_vcc: + regulator_disable(ctx->vcc); + return ret; } static const struct drm_display_mode default_mode = { @@ -300,6 +324,25 @@ static int jh057n_probe(struct mipi_dsi_device *dsi) if (IS_ERR(ctx->backlight)) return PTR_ERR(ctx->backlight); + ctx->vcc = devm_regulator_get(dev, "vcc"); + if (IS_ERR(ctx->vcc)) { + ret = PTR_ERR(ctx->vcc); + if (ret != -EPROBE_DEFER) + DRM_DEV_ERROR(dev, + "Failed to request vcc regulator: %d\n", + ret); + return ret; + } + ctx->iovcc = devm_regulator_get(dev, "iovcc"); + if (IS_ERR(ctx->iovcc)) { + ret = PTR_ERR(ctx->iovcc); + if (ret != -EPROBE_DEFER) + DRM_DEV_ERROR(dev, + "Failed to request iovcc regulator: %d\n", + ret); + return ret; + } + drm_panel_init(&ctx->panel); ctx->panel.dev = dev; ctx->panel.funcs = &jh057n_drm_funcs; @@ -308,7 +351,9 @@ static int jh057n_probe(struct mipi_dsi_device *dsi) ret = mipi_dsi_attach(dsi); if (ret < 0) { - DRM_DEV_ERROR(dev, "mipi_dsi_attach failed. Is host ready?\n"); + DRM_DEV_ERROR(dev, + "mipi_dsi_attach failed (%d). Is host ready?\n", + ret); drm_panel_remove(&ctx->panel); return ret; } @@ -327,12 +372,12 @@ static void jh057n_shutdown(struct mipi_dsi_device *dsi) struct jh057n *ctx = mipi_dsi_get_drvdata(dsi); int ret; - ret = jh057n_unprepare(&ctx->panel); + ret = drm_panel_unprepare(&ctx->panel); if (ret < 0) DRM_DEV_ERROR(&dsi->dev, "Failed to unprepare panel: %d\n", ret); - ret = jh057n_disable(&ctx->panel); + ret = drm_panel_disable(&ctx->panel); if (ret < 0) DRM_DEV_ERROR(&dsi->dev, "Failed to disable panel: %d\n", ret); diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 5a93c4edf1e4..bff7578f84dd 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -30,6 +30,7 @@ #include <linux/regulator/consumer.h> #include <video/display_timing.h> +#include <video/of_display_timing.h> #include <video/videomode.h> #include <drm/drm_crtc.h> @@ -37,6 +38,22 @@ #include <drm/drm_mipi_dsi.h> #include <drm/drm_panel.h> +/** + * @modes: Pointer to array of fixed modes appropriate for this panel. If + * only one mode then this can just be the address of this the mode. + * NOTE: cannot be used with "timings" and also if this is specified + * then you cannot override the mode in the device tree. + * @num_modes: Number of elements in modes array. + * @timings: Pointer to array of display timings. NOTE: cannot be used with + * "modes" and also these will be used to validate a device tree + * override if one is present. + * @num_timings: Number of elements in timings array. + * @bpc: Bits per color. + * @size: Structure containing the physical size of this panel. + * @delay: Structure containing various delay values for this panel. + * @bus_format: See MEDIA_BUS_FMT_... defines. + * @bus_flags: See DRM_BUS_FLAG_... defines. + */ struct panel_desc { const struct drm_display_mode *modes; unsigned int num_modes; @@ -92,6 +109,8 @@ struct panel_simple { struct i2c_adapter *ddc; struct gpio_desc *enable_gpio; + + struct drm_display_mode override_mode; }; static inline struct panel_simple *to_panel_simple(struct drm_panel *panel) @@ -99,16 +118,13 @@ static inline struct panel_simple *to_panel_simple(struct drm_panel *panel) return container_of(panel, struct panel_simple, base); } -static int panel_simple_get_fixed_modes(struct panel_simple *panel) +static unsigned int panel_simple_get_timings_modes(struct panel_simple *panel) { struct drm_connector *connector = panel->base.connector; struct drm_device *drm = panel->base.drm; struct drm_display_mode *mode; unsigned int i, num = 0; - if (!panel->desc) - return 0; - for (i = 0; i < panel->desc->num_timings; i++) { const struct display_timing *dt = &panel->desc->timings[i]; struct videomode vm; @@ -132,6 +148,16 @@ static int panel_simple_get_fixed_modes(struct panel_simple *panel) num++; } + return num; +} + +static unsigned int panel_simple_get_display_modes(struct panel_simple *panel) +{ + struct drm_connector *connector = panel->base.connector; + struct drm_device *drm = panel->base.drm; + struct drm_display_mode *mode; + unsigned int i, num = 0; + for (i = 0; i < panel->desc->num_modes; i++) { const struct drm_display_mode *m = &panel->desc->modes[i]; @@ -153,6 +179,44 @@ static int panel_simple_get_fixed_modes(struct panel_simple *panel) num++; } + return num; +} + +static int panel_simple_get_non_edid_modes(struct panel_simple *panel) +{ + struct drm_connector *connector = panel->base.connector; + struct drm_device *drm = panel->base.drm; + struct drm_display_mode *mode; + bool has_override = panel->override_mode.type; + unsigned int num = 0; + + if (!panel->desc) + return 0; + + if (has_override) { + mode = drm_mode_duplicate(drm, &panel->override_mode); + if (mode) { + drm_mode_probed_add(connector, mode); + num = 1; + } else { + dev_err(drm->dev, "failed to add override mode\n"); + } + } + + /* Only add timings if override was not there or failed to validate */ + if (num == 0 && panel->desc->num_timings) + num = panel_simple_get_timings_modes(panel); + + /* + * Only add fixed modes if timings/override added no mode. + * + * We should only ever have either the display timings specified + * or a fixed mode. Anything else is rather bogus. + */ + WARN_ON(panel->desc->num_timings && panel->desc->num_modes); + if (num == 0) + num = panel_simple_get_display_modes(panel); + connector->display_info.bpc = panel->desc->bpc; connector->display_info.width_mm = panel->desc->size.width; connector->display_info.height_mm = panel->desc->size.height; @@ -269,7 +333,7 @@ static int panel_simple_get_modes(struct drm_panel *panel) } /* add hard-coded panel modes */ - num += panel_simple_get_fixed_modes(p); + num += panel_simple_get_non_edid_modes(p); return num; } @@ -300,10 +364,58 @@ static const struct drm_panel_funcs panel_simple_funcs = { .get_timings = panel_simple_get_timings, }; +#define PANEL_SIMPLE_BOUNDS_CHECK(to_check, bounds, field) \ + (to_check->field.typ >= bounds->field.min && \ + to_check->field.typ <= bounds->field.max) +static void panel_simple_parse_panel_timing_node(struct device *dev, + struct panel_simple *panel, + const struct display_timing *ot) +{ + const struct panel_desc *desc = panel->desc; + struct videomode vm; + unsigned int i; + + if (WARN_ON(desc->num_modes)) { + dev_err(dev, "Reject override mode: panel has a fixed mode\n"); + return; + } + if (WARN_ON(!desc->num_timings)) { + dev_err(dev, "Reject override mode: no timings specified\n"); + return; + } + + for (i = 0; i < panel->desc->num_timings; i++) { + const struct display_timing *dt = &panel->desc->timings[i]; + + if (!PANEL_SIMPLE_BOUNDS_CHECK(ot, dt, hactive) || + !PANEL_SIMPLE_BOUNDS_CHECK(ot, dt, hfront_porch) || + !PANEL_SIMPLE_BOUNDS_CHECK(ot, dt, hback_porch) || + !PANEL_SIMPLE_BOUNDS_CHECK(ot, dt, hsync_len) || + !PANEL_SIMPLE_BOUNDS_CHECK(ot, dt, vactive) || + !PANEL_SIMPLE_BOUNDS_CHECK(ot, dt, vfront_porch) || + !PANEL_SIMPLE_BOUNDS_CHECK(ot, dt, vback_porch) || + !PANEL_SIMPLE_BOUNDS_CHECK(ot, dt, vsync_len)) + continue; + + if (ot->flags != dt->flags) + continue; + + videomode_from_timing(ot, &vm); + drm_display_mode_from_videomode(&vm, &panel->override_mode); + panel->override_mode.type |= DRM_MODE_TYPE_DRIVER | + DRM_MODE_TYPE_PREFERRED; + break; + } + + if (WARN_ON(!panel->override_mode.type)) + dev_err(dev, "Reject override mode: No display_timing found\n"); +} + static int panel_simple_probe(struct device *dev, const struct panel_desc *desc) { struct device_node *backlight, *ddc; struct panel_simple *panel; + struct display_timing dt; int err; panel = devm_kzalloc(dev, sizeof(*panel), GFP_KERNEL); @@ -349,6 +461,9 @@ static int panel_simple_probe(struct device *dev, const struct panel_desc *desc) } } + if (!of_get_display_timing(dev->of_node, "panel-timing", &dt)) + panel_simple_parse_panel_timing_node(dev, panel, &dt); + drm_panel_init(&panel->base); panel->base.dev = dev; panel->base.funcs = &panel_simple_funcs; @@ -496,22 +611,21 @@ static const struct panel_desc auo_b101aw03 = { }, }; -static const struct drm_display_mode auo_b101ean01_mode = { - .clock = 72500, - .hdisplay = 1280, - .hsync_start = 1280 + 119, - .hsync_end = 1280 + 119 + 32, - .htotal = 1280 + 119 + 32 + 21, - .vdisplay = 800, - .vsync_start = 800 + 4, - .vsync_end = 800 + 4 + 20, - .vtotal = 800 + 4 + 20 + 8, - .vrefresh = 60, +static const struct display_timing auo_b101ean01_timing = { + .pixelclock = { 65300000, 72500000, 75000000 }, + .hactive = { 1280, 1280, 1280 }, + .hfront_porch = { 18, 119, 119 }, + .hback_porch = { 21, 21, 21 }, + .hsync_len = { 32, 32, 32 }, + .vactive = { 800, 800, 800 }, + .vfront_porch = { 4, 4, 4 }, + .vback_porch = { 8, 8, 8 }, + .vsync_len = { 18, 20, 20 }, }; static const struct panel_desc auo_b101ean01 = { - .modes = &auo_b101ean01_mode, - .num_modes = 1, + .timings = &auo_b101ean01_timing, + .num_timings = 1, .bpc = 6, .size = { .width = 217, @@ -724,9 +838,9 @@ static const struct panel_desc auo_g133han01 = { static const struct display_timing auo_g185han01_timings = { .pixelclock = { 120000000, 144000000, 175000000 }, .hactive = { 1920, 1920, 1920 }, - .hfront_porch = { 18, 60, 74 }, - .hback_porch = { 12, 44, 54 }, - .hsync_len = { 10, 24, 32 }, + .hfront_porch = { 36, 120, 148 }, + .hback_porch = { 24, 88, 108 }, + .hsync_len = { 20, 48, 64 }, .vactive = { 1080, 1080, 1080 }, .vfront_porch = { 6, 10, 40 }, .vback_porch = { 2, 5, 20 }, @@ -1335,6 +1449,31 @@ static const struct panel_desc giantplus_gpg482739qs5 = { .bus_format = MEDIA_BUS_FMT_RGB888_1X24, }; +static const struct display_timing giantplus_gpm940b0_timing = { + .pixelclock = { 13500000, 27000000, 27500000 }, + .hactive = { 320, 320, 320 }, + .hfront_porch = { 14, 686, 718 }, + .hback_porch = { 50, 70, 255 }, + .hsync_len = { 1, 1, 1 }, + .vactive = { 240, 240, 240 }, + .vfront_porch = { 1, 1, 179 }, + .vback_porch = { 1, 21, 31 }, + .vsync_len = { 1, 1, 6 }, + .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW, +}; + +static const struct panel_desc giantplus_gpm940b0 = { + .timings = &giantplus_gpm940b0_timing, + .num_timings = 1, + .bpc = 8, + .size = { + .width = 60, + .height = 45, + }, + .bus_format = MEDIA_BUS_FMT_RGB888_3X8, + .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_NEGEDGE, +}; + static const struct display_timing hannstar_hsd070pww1_timing = { .pixelclock = { 64300000, 71100000, 82000000 }, .hactive = { 1280, 1280, 1280 }, @@ -1578,23 +1717,32 @@ static const struct panel_desc innolux_g121x1_l03 = { }, }; -static const struct drm_display_mode innolux_n116bge_mode = { - .clock = 76420, - .hdisplay = 1366, - .hsync_start = 1366 + 136, - .hsync_end = 1366 + 136 + 30, - .htotal = 1366 + 136 + 30 + 60, - .vdisplay = 768, - .vsync_start = 768 + 8, - .vsync_end = 768 + 8 + 12, - .vtotal = 768 + 8 + 12 + 12, - .vrefresh = 60, - .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, +/* + * Datasheet specifies that at 60 Hz refresh rate: + * - total horizontal time: { 1506, 1592, 1716 } + * - total vertical time: { 788, 800, 868 } + * + * ...but doesn't go into exactly how that should be split into a front + * porch, back porch, or sync length. For now we'll leave a single setting + * here which allows a bit of tweaking of the pixel clock at the expense of + * refresh rate. + */ +static const struct display_timing innolux_n116bge_timing = { + .pixelclock = { 72600000, 76420000, 80240000 }, + .hactive = { 1366, 1366, 1366 }, + .hfront_porch = { 136, 136, 136 }, + .hback_porch = { 60, 60, 60 }, + .hsync_len = { 30, 30, 30 }, + .vactive = { 768, 768, 768 }, + .vfront_porch = { 8, 8, 8 }, + .vback_porch = { 12, 12, 12 }, + .vsync_len = { 12, 12, 12 }, + .flags = DISPLAY_FLAGS_VSYNC_LOW | DISPLAY_FLAGS_HSYNC_LOW, }; static const struct panel_desc innolux_n116bge = { - .modes = &innolux_n116bge_mode, - .num_modes = 1, + .timings = &innolux_n116bge_timing, + .num_timings = 1, .bpc = 6, .size = { .width = 256, @@ -2157,6 +2305,33 @@ static const struct panel_desc ontat_yx700wv03 = { .bus_format = MEDIA_BUS_FMT_RGB666_1X18, }; +static const struct drm_display_mode ortustech_com37h3m_mode = { + .clock = 22153, + .hdisplay = 480, + .hsync_start = 480 + 8, + .hsync_end = 480 + 8 + 10, + .htotal = 480 + 8 + 10 + 10, + .vdisplay = 640, + .vsync_start = 640 + 4, + .vsync_end = 640 + 4 + 3, + .vtotal = 640 + 4 + 3 + 4, + .vrefresh = 60, + .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC, +}; + +static const struct panel_desc ortustech_com37h3m = { + .modes = &ortustech_com37h3m_mode, + .num_modes = 1, + .bpc = 8, + .size = { + .width = 56, /* 56.16mm */ + .height = 75, /* 74.88mm */ + }, + .bus_format = MEDIA_BUS_FMT_RGB888_1X24, + .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_POSEDGE | + DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE, +}; + static const struct drm_display_mode ortustech_com43h4m85ulc_mode = { .clock = 25000, .hdisplay = 480, @@ -2354,6 +2529,59 @@ static const struct panel_desc samsung_ltn140at29_301 = { }, }; +static const struct drm_display_mode sharp_ld_d5116z01b_mode = { + .clock = 168480, + .hdisplay = 1920, + .hsync_start = 1920 + 48, + .hsync_end = 1920 + 48 + 32, + .htotal = 1920 + 48 + 32 + 80, + .vdisplay = 1280, + .vsync_start = 1280 + 3, + .vsync_end = 1280 + 3 + 10, + .vtotal = 1280 + 3 + 10 + 57, + .vrefresh = 60, + .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC, +}; + +static const struct panel_desc sharp_ld_d5116z01b = { + .modes = &sharp_ld_d5116z01b_mode, + .num_modes = 1, + .bpc = 8, + .size = { + .width = 260, + .height = 120, + }, + .bus_format = MEDIA_BUS_FMT_RGB888_1X24, + .bus_flags = DRM_BUS_FLAG_DATA_MSB_TO_LSB, +}; + +static const struct drm_display_mode sharp_lq070y3dg3b_mode = { + .clock = 33260, + .hdisplay = 800, + .hsync_start = 800 + 64, + .hsync_end = 800 + 64 + 128, + .htotal = 800 + 64 + 128 + 64, + .vdisplay = 480, + .vsync_start = 480 + 8, + .vsync_end = 480 + 8 + 2, + .vtotal = 480 + 8 + 2 + 35, + .vrefresh = 60, + .flags = DISPLAY_FLAGS_PIXDATA_POSEDGE, +}; + +static const struct panel_desc sharp_lq070y3dg3b = { + .modes = &sharp_lq070y3dg3b_mode, + .num_modes = 1, + .bpc = 8, + .size = { + .width = 152, /* 152.4mm */ + .height = 91, /* 91.4mm */ + }, + .bus_format = MEDIA_BUS_FMT_RGB888_1X24, + .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_POSEDGE | + DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE, +}; + static const struct drm_display_mode sharp_lq035q7db03_mode = { .clock = 5500, .hdisplay = 240, @@ -2454,6 +2682,33 @@ static const struct panel_desc sharp_lq150x1lg11 = { .bus_format = MEDIA_BUS_FMT_RGB565_1X16, }; +static const struct display_timing sharp_ls020b1dd01d_timing = { + .pixelclock = { 2000000, 4200000, 5000000 }, + .hactive = { 240, 240, 240 }, + .hfront_porch = { 66, 66, 66 }, + .hback_porch = { 1, 1, 1 }, + .hsync_len = { 1, 1, 1 }, + .vactive = { 160, 160, 160 }, + .vfront_porch = { 52, 52, 52 }, + .vback_porch = { 6, 6, 6 }, + .vsync_len = { 10, 10, 10 }, + .flags = DISPLAY_FLAGS_HSYNC_HIGH | DISPLAY_FLAGS_VSYNC_LOW, +}; + +static const struct panel_desc sharp_ls020b1dd01d = { + .timings = &sharp_ls020b1dd01d_timing, + .num_timings = 1, + .bpc = 6, + .size = { + .width = 42, + .height = 28, + }, + .bus_format = MEDIA_BUS_FMT_RGB565_1X16, + .bus_flags = DRM_BUS_FLAG_DE_HIGH + | DRM_BUS_FLAG_PIXDATA_NEGEDGE + | DRM_BUS_FLAG_SHARP_SIGNALS, +}; + static const struct drm_display_mode shelly_sca07010_bfn_lnn_mode = { .clock = 33300, .hdisplay = 800, @@ -2883,6 +3138,9 @@ static const struct of_device_id platform_of_match[] = { .compatible = "giantplus,gpg482739qs5", .data = &giantplus_gpg482739qs5 }, { + .compatible = "giantplus,gpm940b0", + .data = &giantplus_gpm940b0, + }, { .compatible = "hannstar,hsd070pww1", .data = &hannstar_hsd070pww1, }, { @@ -2979,6 +3237,12 @@ static const struct of_device_id platform_of_match[] = { .compatible = "ontat,yx700wv03", .data = &ontat_yx700wv03, }, { + .compatible = "ortustech,com37h3m05dtc", + .data = &ortustech_com37h3m, + }, { + .compatible = "ortustech,com37h3m99dtc", + .data = &ortustech_com37h3m, + }, { .compatible = "ortustech,com43h4m85ulc", .data = &ortustech_com43h4m85ulc, }, { @@ -3003,9 +3267,15 @@ static const struct of_device_id platform_of_match[] = { .compatible = "samsung,ltn140at29-301", .data = &samsung_ltn140at29_301, }, { + .compatible = "sharp,ld-d5116z01b", + .data = &sharp_ld_d5116z01b, + }, { .compatible = "sharp,lq035q7db03", .data = &sharp_lq035q7db03, }, { + .compatible = "sharp,lq070y3dg3b", + .data = &sharp_lq070y3dg3b, + }, { .compatible = "sharp,lq101k1ly04", .data = &sharp_lq101k1ly04, }, { @@ -3015,6 +3285,9 @@ static const struct of_device_id platform_of_match[] = { .compatible = "sharp,lq150x1lg11", .data = &sharp_lq150x1lg11, }, { + .compatible = "sharp,ls020b1dd01d", + .data = &sharp_ls020b1dd01d, + }, { .compatible = "shelly,sca07010-bfn-lnn", .data = &shelly_sca07010_bfn_lnn, }, { |