diff options
Diffstat (limited to 'drivers/hwmon/Kconfig')
| -rw-r--r-- | drivers/hwmon/Kconfig | 263 |
1 files changed, 227 insertions, 36 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index a608264da87d..4cbaba15d86e 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -40,7 +40,7 @@ comment "Native drivers" config SENSORS_ABITUGURU tristate "Abit uGuru (rev 1 & 2)" - depends on (X86 && DMI) || COMPILE_TEST + depends on (X86 && DMI) || COMPILE_TEST && HAS_IOPORT help If you say yes here you get support for the sensor part of the first and second revision of the Abit uGuru chip. The voltage and frequency @@ -55,7 +55,7 @@ config SENSORS_ABITUGURU config SENSORS_ABITUGURU3 tristate "Abit uGuru (rev 3)" - depends on (X86 && DMI) || COMPILE_TEST + depends on (X86 && DMI) || COMPILE_TEST && HAS_IOPORT help If you say yes here you get support for the sensor part of the third revision of the Abit uGuru chip. Only reading the sensors @@ -105,18 +105,6 @@ config SENSORS_AD7418 This driver can also be built as a module. If so, the module will be called ad7418. -config SENSORS_ADM1021 - tristate "Analog Devices ADM1021 and compatibles" - depends on I2C - depends on SENSORS_LM90=n - help - If you say yes here you get support for Analog Devices ADM1021 - and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, - Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10. - - This driver can also be built as a module. If so, the module - will be called adm1021. - config SENSORS_ADM1025 tristate "Analog Devices ADM1025 and compatibles" depends on I2C @@ -174,6 +162,7 @@ config SENSORS_ADM9240 tristate "Analog Devices ADM9240 and compatibles" depends on I2C select HWMON_VID + select REGMAP_I2C help If you say yes here you get support for Analog Devices ADM9240, Dallas DS1780, National Semiconductor LM81 sensor chips. @@ -235,6 +224,7 @@ config SENSORS_ADT7462 config SENSORS_ADT7470 tristate "Analog Devices ADT7470" depends on I2C + select REGMAP_I2C help If you say yes here you get support for the Analog Devices ADT7470 temperature monitoring chips. @@ -301,6 +291,16 @@ config SENSORS_ASC7621 This driver can also be built as a module. If so, the module will be called asc7621. +config SENSORS_ASUS_ROG_RYUJIN + tristate "ASUS ROG RYUJIN II 360 hardware monitoring driver" + depends on HID + help + If you say yes here you get support for the fans and sensors of + the ASUS ROG RYUJIN II 360 AIO CPU liquid cooler. + + This driver can also be built as a module. If so, the module + will be called asus_rog_ryujin. + config SENSORS_AXI_FAN_CONTROL tristate "Analog Devices FAN Control HDL Core driver" help @@ -324,7 +324,7 @@ config SENSORS_K8TEMP config SENSORS_K10TEMP tristate "AMD Family 10h+ temperature sensor" - depends on X86 && PCI && AMD_NB + depends on X86 && PCI && AMD_NODE help If you say yes here you get support for the temperature sensor(s) inside your CPU. Supported are later revisions of @@ -412,6 +412,17 @@ config SENSORS_ASPEED This driver can also be built as a module. If so, the module will be called aspeed_pwm_tacho. +config SENSORS_ASPEED_G6 + tristate "ASPEED G6 PWM and Fan tach driver" + depends on ARCH_ASPEED || COMPILE_TEST + depends on PWM + help + This driver provides support for ASPEED G6 PWM and Fan Tach + controllers. + + This driver can also be built as a module. If so, the module + will be called aspeed_g6_pwm_tach. + config SENSORS_ATXP1 tristate "Attansic ATXP1 VID controller" depends on I2C @@ -452,6 +463,16 @@ config SENSORS_BT1_PVT_ALARMS the data conversion will be periodically performed and the data will be saved in the internal driver cache. +config SENSORS_CHIPCAP2 + tristate "Amphenol ChipCap 2 relative humidity and temperature sensor" + depends on I2C + help + Say yes here to build support for the Amphenol ChipCap 2 + relative humidity and temperature sensor. + + To compile this driver as a module, choose M here: the module + will be called chipcap2. + config SENSORS_CORSAIR_CPRO tristate "Corsair Commander Pro controller" depends on HID @@ -475,6 +496,17 @@ config SENSORS_CORSAIR_PSU This driver can also be built as a module. If so, the module will be called corsair-psu. +config SENSORS_CROS_EC + tristate "ChromeOS Embedded Controller sensors" + depends on MFD_CROS_EC_DEV + default MFD_CROS_EC_DEV + help + If you say yes here you get support for ChromeOS Embedded Controller + sensors. + + This driver can also be built as a module. If so, the module + will be called cros_ec_hwmon. + config SENSORS_DRIVETEMP tristate "Hard disk drives with temperature sensors" depends on SCSI && ATA @@ -580,6 +612,7 @@ config SENSORS_SPARX5 config SENSORS_F71805F tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG" + depends on HAS_IOPORT depends on !PPC help If you say yes here you get support for hardware monitoring @@ -591,6 +624,7 @@ config SENSORS_F71805F config SENSORS_F71882FG tristate "Fintek F71882FG and compatibles" + depends on HAS_IOPORT depends on !PPC help If you say yes here you get support for hardware monitoring @@ -821,8 +855,20 @@ config SENSORS_CORETEMP sensor inside your CPU. Most of the family 6 CPUs are supported. Check Documentation/hwmon/coretemp.rst for details. +config SENSORS_ISL28022 + tristate "Renesas ISL28022" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for ISL28022 power monitor. + Check Documentation/hwmon/isl28022.rst for details. + + This driver can also be built as a module. If so, the module + will be called isl28022. + config SENSORS_IT87 tristate "ITE IT87xx and compatibles" + depends on HAS_IOPORT depends on !PPC select HWMON_VID help @@ -883,6 +929,16 @@ config SENSORS_LAN966X This driver can also be built as a module. If so, the module will be called lan966x-hwmon. +config SENSORS_LENOVO_EC + tristate "Sensor reader for Lenovo ThinkStations" + depends on X86 + help + If you say yes here you get support for LENOVO + EC Sensor data on newer ThinkStation systems + + This driver can also be built as a module. If so, the module + will be called lenovo_ec_sensors. + config SENSORS_LINEAGE tristate "Lineage Compact Power Line Power Entry Module" depends on I2C @@ -956,6 +1012,7 @@ config SENSORS_LTC2990 config SENSORS_LTC2991 tristate "Analog Devices LTC2991" depends on I2C + select REGMAP_I2C help If you say yes here you get support for Analog Devices LTC2991 Octal I2C Voltage, Current, and Temperature Monitor. The LTC2991 @@ -1038,6 +1095,17 @@ config SENSORS_LTC4261 This driver can also be built as a module. If so, the module will be called ltc4261. +config SENSORS_LTC4282 + tristate "Analog Devices LTC4282" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for Analog Devices LTC4282 + High Current Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4282. + config SENSORS_LTQ_CPUTEMP bool "Lantiq cpu temperature sensor driver" depends on SOC_XWAY @@ -1092,6 +1160,7 @@ config SENSORS_MAX1619 config SENSORS_MAX1668 tristate "Maxim MAX1668 and compatibles" depends on I2C + select REGMAP_I2C help If you say yes here you get support for MAX1668, MAX1989 and MAX1805 chips. @@ -1178,6 +1247,7 @@ config SENSORS_MAX6621 config SENSORS_MAX6639 tristate "Maxim MAX6639 sensor chip" depends on I2C + select REGMAP_I2C help If you say yes here you get support for the MAX6639 sensor chips. @@ -1185,18 +1255,6 @@ config SENSORS_MAX6639 This driver can also be built as a module. If so, the module will be called max6639. -config SENSORS_MAX6642 - tristate "Maxim MAX6642 sensor chip" - depends on I2C - depends on SENSORS_LM90=n - help - If you say yes here you get support for MAX6642 sensor chip. - MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor - with Overtemperature Alarm from Maxim. - - This driver can also be built as a module. If so, the module - will be called max6642. - config SENSORS_MAX6650 tristate "Maxim MAX6650 sensor chip" depends on I2C @@ -1232,6 +1290,7 @@ config SENSORS_MAX31790 config SENSORS_MC34VR500 tristate "NXP MC34VR500 hardware monitoring driver" depends on I2C + select REGMAP_I2C help If you say yes here you get support for the temperature and input voltage sensors of the NXP MC34VR500. @@ -1353,7 +1412,9 @@ config SENSORS_LM73 config SENSORS_LM75 tristate "National Semiconductor LM75 and compatibles" depends on I2C + depends on I3C || !I3C select REGMAP_I2C + select REGMAP_I3C if I3C help If you say yes here you get support for one common type of temperature sensor chip, with models including: @@ -1468,9 +1529,10 @@ config SENSORS_LM90 config SENSORS_LM92 tristate "National Semiconductor LM92 and compatibles" depends on I2C + select REGMAP_I2C help If you say yes here you get support for National Semiconductor LM92 - and Maxim MAX6635 sensor chips. + and LM76 as well as Maxim MAX6633/6634/6635 sensor chips. This driver can also be built as a module. If so, the module will be called lm92. @@ -1489,6 +1551,7 @@ config SENSORS_LM93 config SENSORS_LM95234 tristate "National Semiconductor LM95234 and compatibles" depends on I2C + select REGMAP_I2C help If you say yes here you get support for the LM95233 and LM95234 temperature sensor chips. @@ -1519,6 +1582,7 @@ config SENSORS_LM95245 config SENSORS_PC87360 tristate "National Semiconductor PC87360 family" + depends on HAS_IOPORT depends on !PPC select HWMON_VID help @@ -1533,6 +1597,7 @@ config SENSORS_PC87360 config SENSORS_PC87427 tristate "National Semiconductor PC87427" + depends on HAS_IOPORT depends on !PPC help If you say yes here you get access to the hardware monitoring @@ -1564,6 +1629,7 @@ config SENSORS_NTC_THERMISTOR config SENSORS_NCT6683 tristate "Nuvoton NCT6683D" + depends on HAS_IOPORT depends on !PPC help If you say yes here you get support for the hardware monitoring @@ -1585,6 +1651,7 @@ config SENSORS_NCT6775_CORE config SENSORS_NCT6775 tristate "Platform driver for Nuvoton NCT6775F and compatibles" + depends on HAS_IOPORT depends on !PPC depends on ACPI || ACPI=n select HWMON_VID @@ -1616,6 +1683,17 @@ config SENSORS_NCT6775_I2C This driver can also be built as a module. If so, the module will be called nct6775-i2c. +config SENSORS_NCT7363 + tristate "Nuvoton NCT7363Y" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for the Nuvoton NCT7363Y + hardware monitoring chip. + + This driver can also be built as a module. If so, the module + will be called nct7363. + config SENSORS_NCT7802 tristate "Nuvoton NCT7802Y" depends on I2C @@ -1674,6 +1752,16 @@ config SENSORS_NZXT_KRAKEN2 This driver can also be built as a module. If so, the module will be called nzxt-kraken2. +config SENSORS_NZXT_KRAKEN3 + tristate "NZXT Kraken X53/X63/X73, Z53/Z63/Z73 coolers" + depends on USB_HID + help + If you say yes here you get support for hardware monitoring for the + NZXT Kraken X53/X63/X73, Z53/Z63/Z73 all-in-one CPU liquid coolers. + + This driver can also be built as a module. If so, the module + will be called nzxt-kraken3. + config SENSORS_NZXT_SMART2 tristate "NZXT RGB & Fan Controller/Smart Device v2" depends on USB_HID @@ -1688,7 +1776,7 @@ source "drivers/hwmon/occ/Kconfig" config SENSORS_OXP tristate "OneXPlayer EC fan control" - depends on ACPI + depends on ACPI_EC depends on X86 help If you say yes here you get support for fan readings and control over @@ -1714,9 +1802,19 @@ source "drivers/hwmon/peci/Kconfig" source "drivers/hwmon/pmbus/Kconfig" +config SENSORS_PT5161L + tristate "Astera Labs PT5161L PCIe retimer hardware monitoring" + depends on I2C + help + If you say yes here you get support for temperature monitoring + on the Astera Labs PT5161L PCIe retimer. + + This driver can also be built as a module. If so, the module + will be called pt5161l. + config SENSORS_PWM_FAN tristate "PWM fan" - depends on (PWM && OF) || COMPILE_TEST + depends on PWM || COMPILE_TEST depends on THERMAL || THERMAL=n help If you say yes here you get support for fans connected to PWM lines. @@ -1726,6 +1824,18 @@ config SENSORS_PWM_FAN This driver can also be built as a module. If so, the module will be called pwm-fan. +config SENSORS_QNAP_MCU_HWMON + tristate "QNAP MCU hardware monitoring" + depends on MFD_QNAP_MCU + depends on THERMAL || THERMAL=n + help + Say yes here to enable support for fan and temperature sensor + connected to a QNAP MCU, as found in a number of QNAP network + attached storage devices. + + This driver can also be built as a module. If so, the module + will be called qnap-mcu-hwmon. + config SENSORS_RASPBERRYPI_HWMON tristate "Raspberry Pi voltage monitor" depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE) @@ -1821,7 +1931,7 @@ config SENSORS_SHTC1 config SENSORS_SIS5595 tristate "Silicon Integrated Systems Corp. SiS5595" - depends on PCI + depends on PCI && HAS_IOPORT help If you say yes here you get support for the integrated sensors in SiS5595 South Bridges. @@ -1841,6 +1951,7 @@ config SENSORS_SY7636A config SENSORS_DME1737 tristate "SMSC DME1737, SCH311x and compatibles" + depends on HAS_IOPORT depends on I2C && !PPC select HWMON_VID help @@ -1897,6 +2008,7 @@ config SENSORS_EMC6W201 config SENSORS_SMSC47M1 tristate "SMSC LPC47M10x and compatibles" + depends on HAS_IOPORT depends on !PPC help If you say yes here you get support for the integrated fan @@ -1931,6 +2043,7 @@ config SENSORS_SMSC47M192 config SENSORS_SMSC47B397 tristate "SMSC LPC47B397-NC" + depends on HAS_IOPORT depends on !PPC help If you say yes here you get support for the SMSC LPC47B397-NC @@ -1945,6 +2058,7 @@ config SENSORS_SCH56XX_COMMON config SENSORS_SCH5627 tristate "SMSC SCH5627" + depends on HAS_IOPORT depends on !PPC && WATCHDOG select SENSORS_SCH56XX_COMMON select WATCHDOG_CORE @@ -1958,6 +2072,7 @@ config SENSORS_SCH5627 config SENSORS_SCH5636 tristate "SMSC SCH5636" + depends on HAS_IOPORT depends on !PPC && WATCHDOG select SENSORS_SCH56XX_COMMON select WATCHDOG_CORE @@ -1994,6 +2109,42 @@ config SENSORS_SFCTEMP This driver can also be built as a module. If so, the module will be called sfctemp. +config SENSORS_SG2042_MCU + tristate "Sophgo onboard MCU support" + depends on I2C + depends on ARCH_SOPHGO || COMPILE_TEST + help + Support for onboard MCU of Sophgo SG2042 SoCs. This mcu provides + power control and some basic information. + + This driver can be built as a module. If so, the module + will be called sg2042-mcu. + +config SENSORS_SURFACE_FAN + tristate "Surface Fan Driver" + depends on SURFACE_AGGREGATOR + depends on SURFACE_AGGREGATOR_BUS + help + Driver that provides monitoring of the fan on Surface Pro devices that + have a fan, like the Surface Pro 9. + + This makes the fan's current speed accessible through the hwmon + system. It does not provide control over the fan, the firmware is + responsible for that, this driver merely provides monitoring. + + Select M or Y here, if you want to be able to read the fan's speed. + +config SENSORS_SURFACE_TEMP + tristate "Microsoft Surface Thermal Sensor Driver" + depends on SURFACE_AGGREGATOR + depends on SURFACE_AGGREGATOR_BUS + help + Driver for monitoring thermal sensors connected via the Surface + Aggregator Module (embedded controller) on Microsoft Surface devices. + + This driver can also be built as a module. If so, the module + will be called surface_temp. + config SENSORS_ADC128D818 tristate "Texas Instruments ADC128D818" depends on I2C @@ -2028,6 +2179,7 @@ config SENSORS_ADS7871 config SENSORS_AMC6821 tristate "Texas Instruments AMC6821" depends on I2C + select REGMAP_I2C help If you say yes here you get support for the Texas Instruments AMC6821 hardware monitoring chips. @@ -2051,11 +2203,12 @@ config SENSORS_INA2XX select REGMAP_I2C help If you say yes here you get support for INA219, INA220, INA226, - INA230, and INA231 power monitor chips. + INA230, INA231, INA260, and SY24655 power monitor chips. The INA2xx driver is configured for the default configuration of the part as described in the datasheet. - Default value for Rshunt is 10 mOhms. + Default value for Rshunt is 10 mOhms except for INA260 which has an + internal 2 mOhm shunt resistor. This driver can also be built as a module. If so, the module will be called ina2xx. @@ -2082,6 +2235,37 @@ config SENSORS_INA3221 This driver can also be built as a module. If so, the module will be called ina3221. +config SENSORS_SPD5118 + tristate "SPD5118 Compliant Temperature Sensors" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for SPD5118 (JEDEC JESD300) + compliant temperature sensors. Such sensors are found on DDR5 memory + modules. + + This driver can also be built as a module. If so, the module + will be called spd5118. + +config SENSORS_SPD5118_DETECT + bool "Enable detect function" + depends on SENSORS_SPD5118 + default (!DMI || !X86) + help + If enabled, the driver auto-detects if a chip in the SPD address + range is compliant to the SPD51888 standard and auto-instantiates + if that is the case. If disabled, SPD5118 compliant devices have + to be instantiated by other means. On X86 systems with DMI support + this will typically be done from DMI DDR detection code in the + I2C SMBus subsystem. Devicetree based systems will instantiate + attached devices if the DIMMs are listed in the devicetree file. + + Disabling the detect function will speed up boot time and reduce + the risk of mis-detecting SPD5118 compliant devices. However, it + may result in missed DIMMs under some circumstances. + + If unsure, say Y. + config SENSORS_TC74 tristate "Microchip TC74" depends on I2C @@ -2127,10 +2311,12 @@ config SENSORS_TMP103 config SENSORS_TMP108 tristate "Texas Instruments TMP108" depends on I2C + depends on I3C || !I3C select REGMAP_I2C + select REGMAP_I3C if I3C help If you say yes here you get support for Texas Instruments TMP108 - sensor chips. + sensor chips and NXP P3T1085. This driver can also be built as a module. If so, the module will be called tmp108. @@ -2170,6 +2356,7 @@ config SENSORS_TMP464 config SENSORS_TMP513 tristate "Texas Instruments TMP513 and compatibles" depends on I2C + select REGMAP_I2C help If you say yes here you get support for Texas Instruments TMP512, and TMP513 temperature and power supply sensor chips. @@ -2196,7 +2383,7 @@ config SENSORS_VIA_CPUTEMP config SENSORS_VIA686A tristate "VIA686A" - depends on PCI + depends on PCI && HAS_IOPORT help If you say yes here you get support for the integrated sensors in Via 686A/B South Bridges. @@ -2206,6 +2393,7 @@ config SENSORS_VIA686A config SENSORS_VT1211 tristate "VIA VT1211" + depends on HAS_IOPORT depends on !PPC select HWMON_VID help @@ -2217,7 +2405,7 @@ config SENSORS_VT1211 config SENSORS_VT8231 tristate "VIA VT8231" - depends on PCI + depends on PCI && HAS_IOPORT select HWMON_VID help If you say yes here then you get support for the integrated sensors @@ -2325,6 +2513,7 @@ config SENSORS_W83L786NG config SENSORS_W83627HF tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" + depends on HAS_IOPORT depends on !PPC select HWMON_VID help @@ -2337,6 +2526,7 @@ config SENSORS_W83627HF config SENSORS_W83627EHF tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG" + depends on HAS_IOPORT depends on !PPC select HWMON_VID help @@ -2441,6 +2631,7 @@ config SENSORS_ASUS_WMI config SENSORS_ASUS_EC tristate "ASUS EC Sensors" depends on X86 + depends on ACPI_EC help If you say yes here you get support for the ACPI embedded controller hardware monitoring interface found in ASUS motherboards. The driver |