diff options
Diffstat (limited to 'drivers/hwmon/pmbus/pmbus.h')
| -rw-r--r-- | drivers/hwmon/pmbus/pmbus.h | 39 |
1 files changed, 36 insertions, 3 deletions
diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h index fb442fae7b3e..d2e9bfb5320f 100644 --- a/drivers/hwmon/pmbus/pmbus.h +++ b/drivers/hwmon/pmbus/pmbus.h @@ -418,6 +418,12 @@ enum pmbus_sensor_classes { enum pmbus_data_format { linear = 0, ieee754, direct, vid }; enum vrm_version { vr11 = 0, vr12, vr13, imvp9, amd625mv }; +/* PMBus revision identifiers */ +#define PMBUS_REV_10 0x00 /* PMBus revision 1.0 */ +#define PMBUS_REV_11 0x11 /* PMBus revision 1.1 */ +#define PMBUS_REV_12 0x22 /* PMBus revision 1.2 */ +#define PMBUS_REV_13 0x33 /* PMBus revision 1.3 */ + struct pmbus_driver_info { int pages; /* Total number of pages */ u8 phases[PMBUS_PAGES]; /* Number of phases per page */ @@ -466,11 +472,24 @@ struct pmbus_driver_info { /* custom attributes */ const struct attribute_group **groups; + + /* + * Some chips need a little delay between SMBus communication. When + * set, the generic PMBus helper functions will wait if necessary + * to meet this requirement. The access delay is honored after + * every SMBus operation. The write delay is only honored after + * SMBus write operations. + */ + int access_delay; /* in microseconds */ + int write_delay; /* in microseconds */ + int page_change_delay; /* in microseconds */ }; /* Regulator ops */ extern const struct regulator_ops pmbus_regulator_ops; +int pmbus_regulator_init_cb(struct regulator_dev *rdev, + struct regulator_config *config); /* Macros for filling in array of struct regulator_desc */ #define PMBUS_REGULATOR_STEP(_name, _id, _voltages, _step, _min_uV) \ @@ -485,24 +504,38 @@ extern const struct regulator_ops pmbus_regulator_ops; .n_voltages = _voltages, \ .uV_step = _step, \ .min_uV = _min_uV, \ + .init_cb = pmbus_regulator_init_cb, \ } #define PMBUS_REGULATOR(_name, _id) PMBUS_REGULATOR_STEP(_name, _id, 0, 0, 0) -#define PMBUS_REGULATOR_STEP_ONE(_name, _voltages, _step, _min_uV) \ +#define __PMBUS_REGULATOR_STEP_ONE(_name, _node, _voltages, _step, _min_uV) \ { \ .name = (_name), \ .of_match = of_match_ptr(_name), \ - .regulators_node = of_match_ptr("regulators"), \ + .regulators_node = of_match_ptr(_node), \ .ops = &pmbus_regulator_ops, \ .type = REGULATOR_VOLTAGE, \ .owner = THIS_MODULE, \ .n_voltages = _voltages, \ .uV_step = _step, \ .min_uV = _min_uV, \ + .init_cb = pmbus_regulator_init_cb, \ } -#define PMBUS_REGULATOR_ONE(_name) PMBUS_REGULATOR_STEP_ONE(_name, 0, 0, 0) +/* + * _NODE macros are defined for historic reasons and MUST NOT be used in new + * drivers. + */ +#define PMBUS_REGULATOR_STEP_ONE_NODE(_name, _voltages, _step, _min_uV) \ + __PMBUS_REGULATOR_STEP_ONE(_name, "regulators", _voltages, _step, _min_uV) + +#define PMBUS_REGULATOR_ONE_NODE(_name) PMBUS_REGULATOR_STEP_ONE_NODE(_name, 0, 0, 0) + +#define PMBUS_REGULATOR_STEP_ONE(_name, _voltages, _step, _min_uV) \ + __PMBUS_REGULATOR_STEP_ONE(_name, NULL, _voltages, _step, _min_uV) + +#define PMBUS_REGULATOR_ONE(_name) PMBUS_REGULATOR_STEP_ONE(_name, 0, 0, 0) /* Function declarations */ |