diff options
Diffstat (limited to 'drivers/hwmon/pmbus')
| -rw-r--r-- | drivers/hwmon/pmbus/delta-ahe50dc-fan.c | 16 | ||||
| -rw-r--r-- | drivers/hwmon/pmbus/pmbus_core.c | 3 | ||||
| -rw-r--r-- | drivers/hwmon/pmbus/xdpe12284.c | 2 |
3 files changed, 20 insertions, 1 deletions
diff --git a/drivers/hwmon/pmbus/delta-ahe50dc-fan.c b/drivers/hwmon/pmbus/delta-ahe50dc-fan.c index 40dffd9c4cbf..f546f0c12497 100644 --- a/drivers/hwmon/pmbus/delta-ahe50dc-fan.c +++ b/drivers/hwmon/pmbus/delta-ahe50dc-fan.c @@ -14,6 +14,21 @@ #define AHE50DC_PMBUS_READ_TEMP4 0xd0 +static int ahe50dc_fan_write_byte(struct i2c_client *client, int page, u8 value) +{ + /* + * The CLEAR_FAULTS operation seems to sometimes (unpredictably, perhaps + * 5% of the time or so) trigger a problematic phenomenon in which the + * fan speeds surge momentarily and at least some (perhaps all?) of the + * system's power outputs experience a glitch. + * + * However, according to Delta it should be OK to simply not send any + * CLEAR_FAULTS commands (the device doesn't seem to be capable of + * reporting any faults anyway), so just blackhole them unconditionally. + */ + return value == PMBUS_CLEAR_FAULTS ? -EOPNOTSUPP : -ENODATA; +} + static int ahe50dc_fan_read_word_data(struct i2c_client *client, int page, int phase, int reg) { /* temp1 in (virtual) page 1 is remapped to mfr-specific temp4 */ @@ -68,6 +83,7 @@ static struct pmbus_driver_info ahe50dc_fan_info = { PMBUS_HAVE_VIN | PMBUS_HAVE_FAN12 | PMBUS_HAVE_FAN34 | PMBUS_HAVE_STATUS_FAN12 | PMBUS_HAVE_STATUS_FAN34 | PMBUS_PAGE_VIRTUAL, .func[1] = PMBUS_HAVE_TEMP | PMBUS_PAGE_VIRTUAL, + .write_byte = ahe50dc_fan_write_byte, .read_word_data = ahe50dc_fan_read_word_data, }; diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c index b2618b1d529e..d93574d6a1fb 100644 --- a/drivers/hwmon/pmbus/pmbus_core.c +++ b/drivers/hwmon/pmbus/pmbus_core.c @@ -2326,6 +2326,9 @@ static int pmbus_init_common(struct i2c_client *client, struct pmbus_data *data, data->has_status_word = true; } + /* Make sure PEC is disabled, will be enabled later if needed */ + client->flags &= ~I2C_CLIENT_PEC; + /* Enable PEC if the controller and bus supports it */ if (!(data->flags & PMBUS_NO_CAPABILITY)) { ret = i2c_smbus_read_byte_data(client, PMBUS_CAPABILITY); diff --git a/drivers/hwmon/pmbus/xdpe12284.c b/drivers/hwmon/pmbus/xdpe12284.c index 18fffc5d749b..32bc7736d609 100644 --- a/drivers/hwmon/pmbus/xdpe12284.c +++ b/drivers/hwmon/pmbus/xdpe12284.c @@ -124,7 +124,7 @@ static int xdpe122_identify(struct i2c_client *client, return 0; } -static const struct regulator_desc xdpe122_reg_desc[] = { +static const struct regulator_desc __maybe_unused xdpe122_reg_desc[] = { PMBUS_REGULATOR("vout", 0), PMBUS_REGULATOR("vout", 1), }; |