diff options
Diffstat (limited to 'drivers/i2c/busses')
| -rw-r--r-- | drivers/i2c/busses/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-aspeed.c | 7 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-cadence.c | 1 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-designware-common.c | 17 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-designware-core.h | 3 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-i801.c | 1 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-xiic.c | 2 |
7 files changed, 30 insertions, 5 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 169607e80331..6644eebedaf3 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -1384,10 +1384,10 @@ config I2C_ICY config I2C_MLXCPLD tristate "Mellanox I2C driver" - depends on X86_64 || ARM64 || COMPILE_TEST + depends on X86_64 || (ARM64 && ACPI) || COMPILE_TEST help This exposes the Mellanox platform I2C busses to the linux I2C layer - for X86 based systems. + for X86 and ARM64/ACPI based systems. Controller is implemented as CPLD logic. This driver can also be built as a module. If so, the module will be diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c index 2e5acfeb76c8..5a416b39b818 100644 --- a/drivers/i2c/busses/i2c-aspeed.c +++ b/drivers/i2c/busses/i2c-aspeed.c @@ -698,13 +698,16 @@ static int aspeed_i2c_master_xfer(struct i2c_adapter *adap, if (time_left == 0) { /* - * If timed out and bus is still busy in a multi master - * environment, attempt recovery at here. + * In a multi-master setup, if a timeout occurs, attempt + * recovery. But if the bus is idle, we still need to reset the + * i2c controller to clear the remaining interrupts. */ if (bus->multi_master && (readl(bus->base + ASPEED_I2C_CMD_REG) & ASPEED_I2CD_BUS_BUSY_STS)) aspeed_i2c_recover_bus(bus); + else + aspeed_i2c_reset(bus); /* * If timed out and the state is still pending, drop the pending diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c index 9849f4502570..de3f58b60dce 100644 --- a/drivers/i2c/busses/i2c-cadence.c +++ b/drivers/i2c/busses/i2c-cadence.c @@ -182,6 +182,7 @@ enum cdns_i2c_slave_state { * @reset: Reset control for the device * @quirks: flag for broken hold bit usage in r1p10 * @ctrl_reg: Cached value of the control register. + * @rinfo: I2C GPIO recovery information * @ctrl_reg_diva_divb: value of fields DIV_A and DIV_B from CR register * @slave: Registered slave instance. * @dev_mode: I2C operating role(master/slave). diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c index cdd8c67d9129..affcfb243f0f 100644 --- a/drivers/i2c/busses/i2c-designware-common.c +++ b/drivers/i2c/busses/i2c-designware-common.c @@ -441,8 +441,25 @@ err_release_lock: void __i2c_dw_disable(struct dw_i2c_dev *dev) { + unsigned int raw_intr_stats; + unsigned int enable; int timeout = 100; + bool abort_needed; unsigned int status; + int ret; + + regmap_read(dev->map, DW_IC_RAW_INTR_STAT, &raw_intr_stats); + regmap_read(dev->map, DW_IC_ENABLE, &enable); + + abort_needed = raw_intr_stats & DW_IC_INTR_MST_ON_HOLD; + if (abort_needed) { + regmap_write(dev->map, DW_IC_ENABLE, enable | DW_IC_ENABLE_ABORT); + ret = regmap_read_poll_timeout(dev->map, DW_IC_ENABLE, enable, + !(enable & DW_IC_ENABLE_ABORT), 10, + 100); + if (ret) + dev_err(dev->dev, "timeout while trying to abort current transfer\n"); + } do { __i2c_dw_disable_nowait(dev); diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index cf4f684f5356..a7f6f3eafad7 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -98,6 +98,7 @@ #define DW_IC_INTR_START_DET BIT(10) #define DW_IC_INTR_GEN_CALL BIT(11) #define DW_IC_INTR_RESTART_DET BIT(12) +#define DW_IC_INTR_MST_ON_HOLD BIT(13) #define DW_IC_INTR_DEFAULT_MASK (DW_IC_INTR_RX_FULL | \ DW_IC_INTR_TX_ABRT | \ @@ -108,6 +109,8 @@ DW_IC_INTR_RX_UNDER | \ DW_IC_INTR_RD_REQ) +#define DW_IC_ENABLE_ABORT BIT(1) + #define DW_IC_STATUS_ACTIVITY BIT(0) #define DW_IC_STATUS_TFE BIT(2) #define DW_IC_STATUS_RFNE BIT(3) diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 73ae06432133..1d855258a45d 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -1754,6 +1754,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) "SMBus I801 adapter at %04lx", priv->smba); err = i2c_add_adapter(&priv->adapter); if (err) { + platform_device_unregister(priv->tco_pdev); i801_acpi_remove(priv); return err; } diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c index b3bb97762c85..71391b590ada 100644 --- a/drivers/i2c/busses/i2c-xiic.c +++ b/drivers/i2c/busses/i2c-xiic.c @@ -710,7 +710,7 @@ static irqreturn_t xiic_process(int irq, void *dev_id) * reset the IP instead of just flush fifos */ ret = xiic_reinit(i2c); - if (!ret) + if (ret < 0) dev_dbg(i2c->adap.dev.parent, "reinit failed\n"); if (i2c->rx_msg) { |