summaryrefslogtreecommitdiff
path: root/drivers/i2c/busses
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/busses')
-rw-r--r--drivers/i2c/busses/Kconfig8
-rw-r--r--drivers/i2c/busses/i2c-acorn.c8
-rw-r--r--drivers/i2c/busses/i2c-davinci.c37
-rw-r--r--drivers/i2c/busses/i2c-designware-common.c20
-rw-r--r--drivers/i2c/busses/i2c-designware-core.h2
-rw-r--r--drivers/i2c/busses/i2c-designware-master.c57
-rw-r--r--drivers/i2c/busses/i2c-designware-platdrv.c29
-rw-r--r--drivers/i2c/busses/i2c-designware-slave.c64
-rw-r--r--drivers/i2c/busses/i2c-exynos5.c2
-rw-r--r--drivers/i2c/busses/i2c-gpio.c122
-rw-r--r--drivers/i2c/busses/i2c-imx-lpi2c.c68
-rw-r--r--drivers/i2c/busses/i2c-imx.c20
-rw-r--r--drivers/i2c/busses/i2c-ismt.c42
-rw-r--r--drivers/i2c/busses/i2c-meson.c34
-rw-r--r--drivers/i2c/busses/i2c-mpc.c57
-rw-r--r--drivers/i2c/busses/i2c-mt65xx.c40
-rw-r--r--drivers/i2c/busses/i2c-mv64xxx.c20
-rw-r--r--drivers/i2c/busses/i2c-mxs.c4
-rw-r--r--drivers/i2c/busses/i2c-rcar.c62
-rw-r--r--drivers/i2c/busses/i2c-rk3x.c17
-rw-r--r--drivers/i2c/busses/i2c-sh_mobile.c191
21 files changed, 579 insertions, 325 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 009345d8f49d..a9805c7cb305 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -603,6 +603,14 @@ config I2C_GPIO
This is a very simple bitbanging I2C driver utilizing the
arch-neutral GPIO API to control the SCL and SDA lines.
+config I2C_GPIO_FAULT_INJECTOR
+ bool "GPIO-based fault injector"
+ depends on I2C_GPIO
+ help
+ This adds some functionality to the i2c-gpio driver which can inject
+ faults to an I2C bus, so another bus master can be stress-tested.
+ This is for debugging. If unsure, say 'no'.
+
config I2C_HIGHLANDER
tristate "Highlander FPGA SMBus interface"
depends on SH_HIGHLANDER
diff --git a/drivers/i2c/busses/i2c-acorn.c b/drivers/i2c/busses/i2c-acorn.c
index 9d7be5af2bf2..f4a5ae69bf6a 100644
--- a/drivers/i2c/busses/i2c-acorn.c
+++ b/drivers/i2c/busses/i2c-acorn.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/acorn/char/i2c.c
+ * ARM IOC/IOMD i2c driver.
*
* Copyright (C) 2000 Russell King
*
@@ -7,8 +7,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
- * ARM IOC/IOMD i2c driver.
- *
* On Acorn machines, the following i2c devices are on the bus:
* - PCF8583 real time clock & static RAM
*/
@@ -94,3 +92,7 @@ static int __init i2c_ioc_init(void)
}
module_init(i2c_ioc_init);
+
+MODULE_AUTHOR("Russell King <linux@armlinux.org.uk>");
+MODULE_DESCRIPTION("ARM IOC/IOMD i2c driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 2ead9b9eebb7..75d6ab177055 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -33,7 +33,7 @@
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/cpufreq.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/of_device.h>
#include <linux/platform_data/i2c-davinci.h>
#include <linux/pm_runtime.h>
@@ -139,7 +139,6 @@ struct davinci_i2c_dev {
u8 terminate;
struct i2c_adapter adapter;
#ifdef CONFIG_CPU_FREQ
- struct completion xfr_complete;
struct notifier_block freq_transition;
#endif
struct davinci_i2c_platform_data *pdata;
@@ -294,7 +293,7 @@ static int i2c_davinci_init(struct davinci_i2c_dev *dev)
}
/*
- * This routine does i2c bus recovery by using i2c_generic_gpio_recovery
+ * This routine does i2c bus recovery by using i2c_generic_scl_recovery
* which is provided by I2C Bus recovery infrastructure.
*/
static void davinci_i2c_prepare_recovery(struct i2c_adapter *adap)
@@ -316,7 +315,7 @@ static void davinci_i2c_unprepare_recovery(struct i2c_adapter *adap)
}
static struct i2c_bus_recovery_info davinci_i2c_gpio_recovery_info = {
- .recover_bus = i2c_generic_gpio_recovery,
+ .recover_bus = i2c_generic_scl_recovery,
.prepare_recovery = davinci_i2c_prepare_recovery,
.unprepare_recovery = davinci_i2c_unprepare_recovery,
};
@@ -567,9 +566,6 @@ i2c_davinci_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
}
ret = num;
-#ifdef CONFIG_CPU_FREQ
- complete(&dev->xfr_complete);
-#endif
out:
pm_runtime_mark_last_busy(dev->dev);
@@ -717,13 +713,15 @@ static int i2c_davinci_cpufreq_transition(struct notifier_block *nb,
struct davinci_i2c_dev *dev;
dev = container_of(nb, struct davinci_i2c_dev, freq_transition);
+
+ i2c_lock_adapter(&dev->adapter);
if (val == CPUFREQ_PRECHANGE) {
- wait_for_completion(&dev->xfr_complete);
davinci_i2c_reset_ctrl(dev, 0);
} else if (val == CPUFREQ_POSTCHANGE) {
i2c_davinci_calc_clk_dividers(dev);
davinci_i2c_reset_ctrl(dev, 1);
}
+ i2c_unlock_adapter(&dev->adapter);
return 0;
}
@@ -769,6 +767,7 @@ static int davinci_i2c_probe(struct platform_device *pdev)
struct davinci_i2c_dev *dev;
struct i2c_adapter *adap;
struct resource *mem;
+ struct i2c_bus_recovery_info *rinfo;
int r, irq;
irq = platform_get_irq(pdev, 0);
@@ -789,9 +788,7 @@ static int davinci_i2c_probe(struct platform_device *pdev)
}
init_completion(&dev->cmd_complete);
-#ifdef CONFIG_CPU_FREQ
- init_completion(&dev->xfr_complete);
-#endif
+
dev->dev = &pdev->dev;
dev->irq = irq;
dev->pdata = dev_get_platdata(&pdev->dev);
@@ -868,10 +865,20 @@ static int davinci_i2c_probe(struct platform_device *pdev)
if (dev->pdata->has_pfunc)
adap->bus_recovery_info = &davinci_i2c_scl_recovery_info;
- else if (dev->pdata->scl_pin) {
- adap->bus_recovery_info = &davinci_i2c_gpio_recovery_info;
- adap->bus_recovery_info->scl_gpio = dev->pdata->scl_pin;
- adap->bus_recovery_info->sda_gpio = dev->pdata->sda_pin;
+ else if (dev->pdata->gpio_recovery) {
+ rinfo = &davinci_i2c_gpio_recovery_info;
+ adap->bus_recovery_info = rinfo;
+ rinfo->scl_gpiod = devm_gpiod_get(&pdev->dev, "scl",
+ GPIOD_OUT_HIGH_OPEN_DRAIN);
+ if (IS_ERR(rinfo->scl_gpiod)) {
+ r = PTR_ERR(rinfo->scl_gpiod);
+ goto err_unuse_clocks;
+ }
+ rinfo->sda_gpiod = devm_gpiod_get(&pdev->dev, "sda", GPIOD_IN);
+ if (IS_ERR(rinfo->sda_gpiod)) {
+ r = PTR_ERR(rinfo->sda_gpiod);
+ goto err_unuse_clocks;
+ }
}
adap->nr = pdev->id;
diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
index d1a69372432f..27ebd90de43b 100644
--- a/drivers/i2c/busses/i2c-designware-common.c
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -21,6 +21,7 @@
* ----------------------------------------------------------------------------
*
*/
+#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/export.h>
#include <linux/errno.h>
@@ -185,6 +186,19 @@ unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev)
return dev->get_clk_rate_khz(dev);
}
+int i2c_dw_prepare_clk(struct dw_i2c_dev *dev, bool prepare)
+{
+ if (IS_ERR(dev->clk))
+ return PTR_ERR(dev->clk);
+
+ if (prepare)
+ return clk_prepare_enable(dev->clk);
+
+ clk_disable_unprepare(dev->clk);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(i2c_dw_prepare_clk);
+
int i2c_dw_acquire_lock(struct dw_i2c_dev *dev)
{
int ret;
@@ -217,7 +231,11 @@ int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev)
while (dw_readl(dev, DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) {
if (timeout <= 0) {
dev_warn(dev->dev, "timeout waiting for bus ready\n");
- return -ETIMEDOUT;
+ i2c_recover_bus(&dev->adapter);
+
+ if (dw_readl(dev, DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY)
+ return -ETIMEDOUT;
+ return 0;
}
timeout--;
usleep_range(1000, 1100);
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index 9fee4c054d3d..8707c76b2fee 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -284,6 +284,7 @@ struct dw_i2c_dev {
void (*disable_int)(struct dw_i2c_dev *dev);
int (*init)(struct dw_i2c_dev *dev);
int mode;
+ struct i2c_bus_recovery_info rinfo;
};
#define ACCESS_SWAP 0x00000001
@@ -299,6 +300,7 @@ u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset);
void __i2c_dw_enable(struct dw_i2c_dev *dev, bool enable);
void __i2c_dw_enable_and_wait(struct dw_i2c_dev *dev, bool enable);
unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev);
+int i2c_dw_prepare_clk(struct dw_i2c_dev *dev, bool prepare);
int i2c_dw_acquire_lock(struct dw_i2c_dev *dev);
void i2c_dw_release_lock(struct dw_i2c_dev *dev);
int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev);
diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index 418c233075d3..ae691884d071 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -25,11 +25,13 @@
#include <linux/err.h>
#include <linux/errno.h>
#include <linux/export.h>
+#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/pm_runtime.h>
+#include <linux/reset.h>
#include "i2c-designware-core.h"
@@ -443,6 +445,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
if (!wait_for_completion_timeout(&dev->cmd_complete, adap->timeout)) {
dev_err(dev->dev, "controller timed out\n");
/* i2c_dw_init implicitly disables the adapter */
+ i2c_recover_bus(&dev->adapter);
i2c_dw_init_master(dev);
ret = -ETIMEDOUT;
goto done;
@@ -613,6 +616,56 @@ static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
return IRQ_HANDLED;
}
+static void i2c_dw_prepare_recovery(struct i2c_adapter *adap)
+{
+ struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
+
+ i2c_dw_disable(dev);
+ reset_control_assert(dev->rst);
+ i2c_dw_prepare_clk(dev, false);
+}
+
+static void i2c_dw_unprepare_recovery(struct i2c_adapter *adap)
+{
+ struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
+
+ i2c_dw_prepare_clk(dev, true);
+ reset_control_deassert(dev->rst);
+ i2c_dw_init_master(dev);
+}
+
+static int i2c_dw_init_recovery_info(struct dw_i2c_dev *dev)
+{
+ struct i2c_bus_recovery_info *rinfo = &dev->rinfo;
+ struct i2c_adapter *adap = &dev->adapter;
+ struct gpio_desc *gpio;
+ int r;
+
+ gpio = devm_gpiod_get(dev->dev, "scl", GPIOD_OUT_HIGH);
+ if (IS_ERR(gpio)) {
+ r = PTR_ERR(gpio);
+ if (r == -ENOENT)
+ return 0;
+ return r;
+ }
+ rinfo->scl_gpiod = gpio;
+
+ gpio = devm_gpiod_get_optional(dev->dev, "sda", GPIOD_IN);
+ if (IS_ERR(gpio))
+ return PTR_ERR(gpio);
+ rinfo->sda_gpiod = gpio;
+
+ rinfo->recover_bus = i2c_generic_scl_recovery;
+ rinfo->prepare_recovery = i2c_dw_prepare_recovery;
+ rinfo->unprepare_recovery = i2c_dw_unprepare_recovery;
+ adap->bus_recovery_info = rinfo;
+
+ dev_info(dev->dev, "running with gpio recovery mode! scl%s",
+ rinfo->sda_gpiod ? ",sda" : "");
+
+ return 0;
+}
+
int i2c_dw_probe(struct dw_i2c_dev *dev)
{
struct i2c_adapter *adap = &dev->adapter;
@@ -652,6 +705,10 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)
return ret;
}
+ ret = i2c_dw_init_recovery_info(dev);
+ if (ret)
+ return ret;
+
/*
* Increment PM usage count during adapter registration in order to
* avoid possible spurious runtime suspend when adapter device is
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 153b947702c5..5660daf6c92e 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -202,29 +202,6 @@ static void i2c_dw_configure_slave(struct dw_i2c_dev *dev)
DW_IC_CON_RESTART_EN | DW_IC_CON_STOP_DET_IFADDRESSED;
dev->mode = DW_IC_SLAVE;
-
- switch (dev->clk_freq) {
- case 100000:
- dev->slave_cfg |= DW_IC_CON_SPEED_STD;
- break;
- case 3400000:
- dev->slave_cfg |= DW_IC_CON_SPEED_HIGH;
- break;
- default:
- dev->slave_cfg |= DW_IC_CON_SPEED_FAST;
- }
-}
-
-static int i2c_dw_plat_prepare_clk(struct dw_i2c_dev *i_dev, bool prepare)
-{
- if (IS_ERR(i_dev->clk))
- return PTR_ERR(i_dev->clk);
-
- if (prepare)
- return clk_prepare_enable(i_dev->clk);
-
- clk_disable_unprepare(i_dev->clk);
- return 0;
}
static void dw_i2c_set_fifo_size(struct dw_i2c_dev *dev, int id)
@@ -356,7 +333,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
i2c_dw_configure_master(dev);
dev->clk = devm_clk_get(&pdev->dev, NULL);
- if (!i2c_dw_plat_prepare_clk(dev, true)) {
+ if (!i2c_dw_prepare_clk(dev, true)) {
dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
if (!dev->sda_hold_time && ht)
@@ -472,7 +449,7 @@ static int dw_i2c_plat_suspend(struct device *dev)
struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
i_dev->disable(i_dev);
- i2c_dw_plat_prepare_clk(i_dev, false);
+ i2c_dw_prepare_clk(i_dev, false);
return 0;
}
@@ -481,7 +458,7 @@ static int dw_i2c_plat_resume(struct device *dev)
{
struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
- i2c_dw_plat_prepare_clk(i_dev, true);
+ i2c_dw_prepare_clk(i_dev, true);
i_dev->init(i_dev);
return 0;
diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c
index ea9578ab19a1..d42558d1b002 100644
--- a/drivers/i2c/busses/i2c-designware-slave.c
+++ b/drivers/i2c/busses/i2c-designware-slave.c
@@ -51,9 +51,7 @@ static void i2c_dw_configure_fifo_slave(struct dw_i2c_dev *dev)
*/
static int i2c_dw_init_slave(struct dw_i2c_dev *dev)
{
- u32 sda_falling_time, scl_falling_time;
u32 reg, comp_param1;
- u32 hcnt, lcnt;
int ret;
ret = i2c_dw_acquire_lock(dev);
@@ -79,68 +77,6 @@ static int i2c_dw_init_slave(struct dw_i2c_dev *dev)
/* Disable the adapter. */
__i2c_dw_enable_and_wait(dev, false);
- /* Set standard and fast speed deviders for high/low periods. */
- sda_falling_time = dev->sda_falling_time ?: 300; /* ns */
- scl_falling_time = dev->scl_falling_time ?: 300; /* ns */
-
- /* Set SCL timing parameters for standard-mode. */
- if (dev->ss_hcnt && dev->ss_lcnt) {
- hcnt = dev->ss_hcnt;
- lcnt = dev->ss_lcnt;
- } else {
- hcnt = i2c_dw_scl_hcnt(i2c_dw_clk_rate(dev),
- 4000, /* tHD;STA = tHIGH = 4.0 us */
- sda_falling_time,
- 0, /* 0: DW default, 1: Ideal */
- 0); /* No offset */
- lcnt = i2c_dw_scl_lcnt(i2c_dw_clk_rate(dev),
- 4700, /* tLOW = 4.7 us */
- scl_falling_time,
- 0); /* No offset */
- }
- dw_writel(dev, hcnt, DW_IC_SS_SCL_HCNT);
- dw_writel(dev, lcnt, DW_IC_SS_SCL_LCNT);
- dev_dbg(dev->dev, "Standard-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
-
- /* Set SCL timing parameters for fast-mode or fast-mode plus. */
- if ((dev->clk_freq == 1000000) && dev->fp_hcnt && dev->fp_lcnt) {
- hcnt = dev->fp_hcnt;
- lcnt = dev->fp_lcnt;
- } else if (dev->fs_hcnt && dev->fs_lcnt) {
- hcnt = dev->fs_hcnt;
- lcnt = dev->fs_lcnt;
- } else {
- hcnt = i2c_dw_scl_hcnt(i2c_dw_clk_rate(dev),
- 600, /* tHD;STA = tHIGH = 0.6 us */
- sda_falling_time,
- 0, /* 0: DW default, 1: Ideal */
- 0); /* No offset */
- lcnt = i2c_dw_scl_lcnt(i2c_dw_clk_rate(dev),
- 1300, /* tLOW = 1.3 us */
- scl_falling_time,
- 0); /* No offset */
- }
- dw_writel(dev, hcnt, DW_IC_FS_SCL_HCNT);
- dw_writel(dev, lcnt, DW_IC_FS_SCL_LCNT);
- dev_dbg(dev->dev, "Fast-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
-
- if ((dev->slave_cfg & DW_IC_CON_SPEED_MASK) ==
- DW_IC_CON_SPEED_HIGH) {
- if ((comp_param1 & DW_IC_COMP_PARAM_1_SPEED_MODE_MASK)
- != DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH) {
- dev_err(dev->dev, "High Speed not supported!\n");
- dev->slave_cfg &= ~DW_IC_CON_SPEED_MASK;
- dev->slave_cfg |= DW_IC_CON_SPEED_FAST;
- } else if (dev->hs_hcnt && dev->hs_lcnt) {
- hcnt = dev->hs_hcnt;
- lcnt = dev->hs_lcnt;
- dw_writel(dev, hcnt, DW_IC_HS_SCL_HCNT);
- dw_writel(dev, lcnt, DW_IC_HS_SCL_LCNT);
- dev_dbg(dev->dev, "HighSpeed-mode HCNT:LCNT = %d:%d\n",
- hcnt, lcnt);
- }
- }
-
/* Configure SDA Hold Time if required. */
reg = dw_readl(dev, DW_IC_COMP_VERSION);
if (reg >= DW_IC_SDA_HOLD_MIN_VERS) {
diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
index 3855e0b11877..b02428498f6d 100644
--- a/drivers/i2c/busses/i2c-exynos5.c
+++ b/drivers/i2c/busses/i2c-exynos5.c
@@ -170,7 +170,7 @@
#define HSI2C_HS_TX_CLOCK 1000000
#define HSI2C_FS_TX_CLOCK 100000
-#define EXYNOS5_I2C_TIMEOUT (msecs_to_jiffies(1000))
+#define EXYNOS5_I2C_TIMEOUT (msecs_to_jiffies(100))
#define HSI2C_EXYNOS7 BIT(0)
diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
index d80ea6ce91bb..58abb3eced58 100644
--- a/drivers/i2c/busses/i2c-gpio.c
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -7,6 +7,8 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/debugfs.h>
+#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
#include <linux/i2c-gpio.h>
@@ -23,6 +25,9 @@ struct i2c_gpio_private_data {
struct i2c_adapter adap;
struct i2c_algo_bit_data bit_data;
struct i2c_gpio_platform_data pdata;
+#ifdef CONFIG_I2C_GPIO_FAULT_INJECTOR
+ struct dentry *debug_dir;
+#endif
};
/*
@@ -34,7 +39,7 @@ static void i2c_gpio_setsda_val(void *data, int state)
{
struct i2c_gpio_private_data *priv = data;
- gpiod_set_value(priv->sda, state);
+ gpiod_set_value_cansleep(priv->sda, state);
}
/*
@@ -47,23 +52,125 @@ static void i2c_gpio_setscl_val(void *data, int state)
{
struct i2c_gpio_private_data *priv = data;
- gpiod_set_value(priv->scl, state);
+ gpiod_set_value_cansleep(priv->scl, state);
}
static int i2c_gpio_getsda(void *data)
{
struct i2c_gpio_private_data *priv = data;
- return gpiod_get_value(priv->sda);
+ return gpiod_get_value_cansleep(priv->sda);
}
static int i2c_gpio_getscl(void *data)
{
struct i2c_gpio_private_data *priv = data;
- return gpiod_get_value(priv->scl);
+ return gpiod_get_value_cansleep(priv->scl);
+}
+
+#ifdef CONFIG_I2C_GPIO_FAULT_INJECTOR
+static struct dentry *i2c_gpio_debug_dir;
+
+#define setsda(bd, val) ((bd)->setsda((bd)->data, val))
+#define setscl(bd, val) ((bd)->setscl((bd)->data, val))
+#define getsda(bd) ((bd)->getsda((bd)->data))
+#define getscl(bd) ((bd)->getscl((bd)->data))
+
+#define WIRE_ATTRIBUTE(wire) \
+static int fops_##wire##_get(void *data, u64 *val) \
+{ \
+ struct i2c_gpio_private_data *priv = data; \
+ \
+ i2c_lock_adapter(&priv->adap); \
+ *val = get##wire(&priv->bit_data); \
+ i2c_unlock_adapter(&priv->adap); \
+ return 0; \
+} \
+static int fops_##wire##_set(void *data, u64 val) \
+{ \
+ struct i2c_gpio_private_data *priv = data; \
+ \
+ i2c_lock_adapter(&priv->adap); \
+ set##wire(&priv->bit_data, val); \
+ i2c_unlock_adapter(&priv->adap); \
+ return 0; \
+} \
+DEFINE_DEBUGFS_ATTRIBUTE(fops_##wire, fops_##wire##_get, fops_##wire##_set, "%llu\n")
+
+WIRE_ATTRIBUTE(scl);
+WIRE_ATTRIBUTE(sda);
+
+static int fops_incomplete_transfer_set(void *data, u64 addr)
+{
+ struct i2c_gpio_private_data *priv = data;
+ struct i2c_algo_bit_data *bit_data = &priv->bit_data;
+ int i, pattern;
+
+ if (addr > 0x7f)
+ return -EINVAL;
+
+ /* ADDR (7 bit) + RD (1 bit) + SDA hi (1 bit) */
+ pattern = (addr << 2) | 3;
+
+ i2c_lock_adapter(&priv->adap);
+
+ /* START condition */
+ setsda(bit_data, 0);
+ udelay(bit_data->udelay);
+
+ /* Send ADDR+RD, request ACK, don't send STOP */
+ for (i = 8; i >= 0; i--) {
+ setscl(bit_data, 0);
+ udelay(bit_data->udelay / 2);
+ setsda(bit_data, (pattern >> i) & 1);
+ udelay((bit_data->udelay + 1) / 2);
+ setscl(bit_data, 1);
+ udelay(bit_data->udelay);
+ }
+
+ i2c_unlock_adapter(&priv->adap);
+
+ return 0;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(fops_incomplete_transfer, NULL, fops_incomplete_transfer_set, "%llu\n");
+
+static void i2c_gpio_fault_injector_init(struct platform_device *pdev)
+{
+ struct i2c_gpio_private_data *priv = platform_get_drvdata(pdev);
+
+ /*
+ * If there will be a debugfs-dir per i2c adapter somewhen, put the
+ * 'fault-injector' dir there. Until then, we have a global dir with
+ * all adapters as subdirs.
+ */
+ if (!i2c_gpio_debug_dir) {
+ i2c_gpio_debug_dir = debugfs_create_dir("i2c-fault-injector", NULL);
+ if (!i2c_gpio_debug_dir)
+ return;
+ }
+
+ priv->debug_dir = debugfs_create_dir(pdev->name, i2c_gpio_debug_dir);
+ if (!priv->debug_dir)
+ return;
+
+ debugfs_create_file_unsafe("scl", 0600, priv->debug_dir, priv, &fops_scl);
+ debugfs_create_file_unsafe("sda", 0600, priv->debug_dir, priv, &fops_sda);
+ debugfs_create_file_unsafe("incomplete_transfer", 0200, priv->debug_dir,
+ priv, &fops_incomplete_transfer);
}
+static void i2c_gpio_fault_injector_exit(struct platform_device *pdev)
+{
+ struct i2c_gpio_private_data *priv = platform_get_drvdata(pdev);
+
+ debugfs_remove_recursive(priv->debug_dir);
+}
+#else
+static inline void i2c_gpio_fault_injector_init(struct platform_device *pdev) {}
+static inline void i2c_gpio_fault_injector_exit(struct platform_device *pdev) {}
+#endif /* CONFIG_I2C_GPIO_FAULT_INJECTOR*/
+
static void of_i2c_gpio_get_props(struct device_node *np,
struct i2c_gpio_platform_data *pdata)
{
@@ -179,6 +286,9 @@ static int i2c_gpio_probe(struct platform_device *pdev)
if (IS_ERR(priv->scl))
return PTR_ERR(priv->scl);
+ if (gpiod_cansleep(priv->sda) || gpiod_cansleep(priv->scl))
+ dev_warn(dev, "Slow GPIO pins might wreak havoc into I2C/SMBus bus timing");
+
bit_data->setsda = i2c_gpio_setsda_val;
bit_data->setscl = i2c_gpio_setscl_val;
@@ -228,6 +338,8 @@ static int i2c_gpio_probe(struct platform_device *pdev)
pdata->scl_is_output_only
? ", no clock stretching" : "");
+ i2c_gpio_fault_injector_init(pdev);
+
return 0;
}
@@ -236,6 +348,8 @@ static int i2c_gpio_remove(struct platform_device *pdev)
struct i2c_gpio_private_data *priv;
struct i2c_adapter *adap;
+ i2c_gpio_fault_injector_exit(pdev);
+
priv = platform_get_drvdata(pdev);
adap = &priv->adap;
diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c
index e86801a63120..e6da2c7a9a3e 100644
--- a/drivers/i2c/busses/i2c-imx-lpi2c.c
+++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
@@ -30,6 +30,7 @@
#include <linux/of_device.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/sched.h>
#include <linux/slab.h>
@@ -90,6 +91,8 @@
#define FAST_PLUS_MAX_BITRATE 3400000
#define HIGHSPEED_MAX_BITRATE 5000000
+#define I2C_PM_TIMEOUT 10 /* ms */
+
enum lpi2c_imx_mode {
STANDARD, /* 100+Kbps */
FAST, /* 400+Kbps */
@@ -274,8 +277,8 @@ static int lpi2c_imx_master_enable(struct lpi2c_imx_struct *lpi2c_imx)
unsigned int temp;
int ret;
- ret = clk_enable(lpi2c_imx->clk);
- if (ret)
+ ret = pm_runtime_get_sync(lpi2c_imx->adapter.dev.parent);
+ if (ret < 0)
return ret;
temp = MCR_RST;
@@ -284,7 +287,7 @@ static int lpi2c_imx_master_enable(struct lpi2c_imx_struct *lpi2c_imx)
ret = lpi2c_imx_config(lpi2c_imx);
if (ret)
- goto clk_disable;
+ goto rpm_put;
temp = readl(lpi2c_imx->base + LPI2C_MCR);
temp |= MCR_MEN;
@@ -292,8 +295,9 @@ static int lpi2c_imx_master_enable(struct lpi2c_imx_struct *lpi2c_imx)
return 0;
-clk_disable:
- clk_disable(lpi2c_imx->clk);
+rpm_put:
+ pm_runtime_mark_last_busy(lpi2c_imx->adapter.dev.parent);
+ pm_runtime_put_autosuspend(lpi2c_imx->adapter.dev.parent);
return ret;
}
@@ -306,7 +310,8 @@ static int lpi2c_imx_master_disable(struct lpi2c_imx_struct *lpi2c_imx)
temp &= ~MCR_MEN;
writel(temp, lpi2c_imx->base + LPI2C_MCR);
- clk_disable(lpi2c_imx->clk);
+ pm_runtime_mark_last_busy(lpi2c_imx->adapter.dev.parent);
+ pm_runtime_put_autosuspend(lpi2c_imx->adapter.dev.parent);
return 0;
}
@@ -606,22 +611,31 @@ static int lpi2c_imx_probe(struct platform_device *pdev)
return ret;
}
+ pm_runtime_set_autosuspend_delay(&pdev->dev, I2C_PM_TIMEOUT);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_get_noresume(&pdev->dev);
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+
temp = readl(lpi2c_imx->base + LPI2C_PARAM);
lpi2c_imx->txfifosize = 1 << (temp & 0x0f);
lpi2c_imx->rxfifosize = 1 << ((temp >> 8) & 0x0f);
- clk_disable(lpi2c_imx->clk);
-
ret = i2c_add_adapter(&lpi2c_imx->adapter);
if (ret)
- goto clk_unprepare;
+ goto rpm_disable;
+
+ pm_runtime_mark_last_busy(&pdev->dev);
+ pm_runtime_put_autosuspend(&pdev->dev);
dev_info(&lpi2c_imx->adapter.dev, "LPI2C adapter registered\n");
return 0;
-clk_unprepare:
- clk_unprepare(lpi2c_imx->clk);
+rpm_disable:
+ pm_runtime_put(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
return ret;
}
@@ -632,28 +646,48 @@ static int lpi2c_imx_remove(struct platform_device *pdev)
i2c_del_adapter(&lpi2c_imx->adapter);
- clk_unprepare(lpi2c_imx->clk);
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
return 0;
}
#ifdef CONFIG_PM_SLEEP
-static int lpi2c_imx_suspend(struct device *dev)
+static int lpi2c_runtime_suspend(struct device *dev)
{
+ struct lpi2c_imx_struct *lpi2c_imx = dev_get_drvdata(dev);
+
+ clk_disable_unprepare(lpi2c_imx->clk);
pinctrl_pm_select_sleep_state(dev);
return 0;
}
-static int lpi2c_imx_resume(struct device *dev)
+static int lpi2c_runtime_resume(struct device *dev)
{
+ struct lpi2c_imx_struct *lpi2c_imx = dev_get_drvdata(dev);
+ int ret;
+
pinctrl_pm_select_default_state(dev);
+ ret = clk_prepare_enable(lpi2c_imx->clk);
+ if (ret) {
+ dev_err(dev, "failed to enable I2C clock, ret=%d\n", ret);
+ return ret;
+ }
return 0;
}
-#endif
-static SIMPLE_DEV_PM_OPS(imx_lpi2c_pm, lpi2c_imx_suspend, lpi2c_imx_resume);
+static const struct dev_pm_ops lpi2c_pm_ops = {
+ SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
+ SET_RUNTIME_PM_OPS(lpi2c_runtime_suspend,
+ lpi2c_runtime_resume, NULL)
+};
+#define IMX_LPI2C_PM (&lpi2c_pm_ops)
+#else
+#define IMX_LPI2C_PM NULL
+#endif
static struct platform_driver lpi2c_imx_driver = {
.probe = lpi2c_imx_probe,
@@ -661,7 +695,7 @@ static struct platform_driver lpi2c_imx_driver = {
.driver = {
.name = DRIVER_NAME,
.of_match_table = lpi2c_imx_of_match,
- .pm = &imx_lpi2c_pm,
+ .pm = IMX_LPI2C_PM,
},
};
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index f96830ffd9f1..999557729ad2 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -37,6 +37,7 @@
#include <linux/dmapool.h>
#include <linux/err.h>
#include <linux/errno.h>
+#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/interrupt.h>
@@ -46,7 +47,6 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_dma.h>
-#include <linux/of_gpio.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_data/i2c-imx.h>
#include <linux/platform_device.h>
@@ -1006,26 +1006,26 @@ static int i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx,
PINCTRL_STATE_DEFAULT);
i2c_imx->pinctrl_pins_gpio = pinctrl_lookup_state(i2c_imx->pinctrl,
"gpio");
- rinfo->sda_gpio = of_get_named_gpio(pdev->dev.of_node, "sda-gpios", 0);
- rinfo->scl_gpio = of_get_named_gpio(pdev->dev.of_node, "scl-gpios", 0);
+ rinfo->sda_gpiod = devm_gpiod_get(&pdev->dev, "sda", GPIOD_IN);
+ rinfo->scl_gpiod = devm_gpiod_get(&pdev->dev, "scl", GPIOD_OUT_HIGH);
- if (rinfo->sda_gpio == -EPROBE_DEFER ||
- rinfo->scl_gpio == -EPROBE_DEFER) {
+ if (PTR_ERR(rinfo->sda_gpiod) == -EPROBE_DEFER ||
+ PTR_ERR(rinfo->scl_gpiod) == -EPROBE_DEFER) {
return -EPROBE_DEFER;
- } else if (!gpio_is_valid(rinfo->sda_gpio) ||
- !gpio_is_valid(rinfo->scl_gpio) ||
+ } else if (IS_ERR(rinfo->sda_gpiod) ||
+ IS_ERR(rinfo->scl_gpiod) ||
IS_ERR(i2c_imx->pinctrl_pins_default) ||
IS_ERR(i2c_imx->pinctrl_pins_gpio)) {
dev_dbg(&pdev->dev, "recovery information incomplete\n");
return 0;
}
- dev_dbg(&pdev->dev, "using scl-gpio %d and sda-gpio %d for recovery\n",
- rinfo->scl_gpio, rinfo->sda_gpio);
+ dev_dbg(&pdev->dev, "using scl%s for recovery\n",
+ rinfo->sda_gpiod ? ",sda" : "");
rinfo->prepare_recovery = i2c_imx_prepare_recovery;
rinfo->unprepare_recovery = i2c_imx_unprepare_recovery;
- rinfo->recover_bus = i2c_generic_gpio_recovery;
+ rinfo->recover_bus = i2c_generic_scl_recovery;
i2c_imx->adapter.bus_recovery_info = rinfo;
return 0;
diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c
index b51adffa4841..0d1c3ec8cb40 100644
--- a/drivers/i2c/busses/i2c-ismt.c
+++ b/drivers/i2c/busses/i2c-ismt.c
@@ -172,7 +172,7 @@ struct ismt_priv {
dma_addr_t io_rng_dma; /* descriptor HW base addr */
u8 head; /* ring buffer head pointer */
struct completion cmp; /* interrupt completion */
- u8 dma_buffer[I2C_SMBUS_BLOCK_MAX + 1]; /* temp R/W data buffer */
+ u8 buffer[I2C_SMBUS_BLOCK_MAX + 16]; /* temp R/W data buffer */
};
/**
@@ -320,10 +320,12 @@ static int ismt_process_desc(const struct ismt_desc *desc,
struct ismt_priv *priv, int size,
char read_write)
{
- u8 *dma_buffer = priv->dma_buffer;
+ u8 *dma_buffer = PTR_ALIGN(&priv->buffer[0], 16);
dev_dbg(&priv->pci_dev->dev, "Processing completed descriptor\n");
__ismt_desc_dump(&priv->pci_dev->dev, desc);
+ ismt_gen_reg_dump(priv);
+ ismt_mstr_reg_dump(priv);
if (desc->status & ISMT_DESC_SCS) {
if (read_write == I2C_SMBUS_WRITE &&
@@ -393,11 +395,12 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr,
struct ismt_desc *desc;
struct ismt_priv *priv = i2c_get_adapdata(adap);
struct device *dev = &priv->pci_dev->dev;
+ u8 *dma_buffer = PTR_ALIGN(&priv->buffer[0], 16);
desc = &priv->hw[priv->head];
/* Initialize the DMA buffer */
- memset(priv->dma_buffer, 0, sizeof(priv->dma_buffer));
+ memset(priv->buffer, 0, sizeof(priv->buffer));
/* Initialize the descriptor */
memset(desc, 0, sizeof(struct ismt_desc));
@@ -446,8 +449,8 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr,
desc->wr_len_cmd = 2;
dma_size = 2;
dma_direction = DMA_TO_DEVICE;
- priv->dma_buffer[0] = command;
- priv->dma_buffer[1] = data->byte;
+ dma_buffer[0] = command;
+ dma_buffer[1] = data->byte;
} else {
/* Read Byte */
dev_dbg(dev, "I2C_SMBUS_BYTE_DATA: READ\n");
@@ -466,9 +469,9 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr,
desc->wr_len_cmd = 3;
dma_size = 3;
dma_direction = DMA_TO_DEVICE;
- priv->dma_buffer[0] = command;
- priv->dma_buffer[1] = data->word & 0xff;
- priv->dma_buffer[2] = data->word >> 8;
+ dma_buffer[0] = command;
+ dma_buffer[1] = data->word & 0xff;
+ dma_buffer[2] = data->word >> 8;
} else {
/* Read Word */
dev_dbg(dev, "I2C_SMBUS_WORD_DATA: READ\n");
@@ -486,9 +489,9 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr,
desc->rd_len = 2;
dma_size = 3;
dma_direction = DMA_BIDIRECTIONAL;
- priv->dma_buffer[0] = command;
- priv->dma_buffer[1] = data->word & 0xff;
- priv->dma_buffer[2] = data->word >> 8;
+ dma_buffer[0] = command;
+ dma_buffer[1] = data->word & 0xff;
+ dma_buffer[2] = data->word >> 8;
break;
case I2C_SMBUS_BLOCK_DATA:
@@ -499,8 +502,8 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr,
dma_direction = DMA_TO_DEVICE;
desc->wr_len_cmd = dma_size;
desc->control |= ISMT_DESC_BLK;
- priv->dma_buffer[0] = command;
- memcpy(&priv->dma_buffer[1], &data->block[1], dma_size - 1);
+ dma_buffer[0] = command;
+ memcpy(&dma_buffer[1], &data->block[1], dma_size - 1);
} else {
/* Block Read */
dev_dbg(dev, "I2C_SMBUS_BLOCK_DATA: READ\n");
@@ -527,8 +530,8 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr,
dma_direction = DMA_TO_DEVICE;
desc->wr_len_cmd = dma_size;
desc->control |= ISMT_DESC_I2C;
- priv->dma_buffer[0] = command;
- memcpy(&priv->dma_buffer[1], &data->block[1], dma_size - 1);
+ dma_buffer[0] = command;
+ memcpy(&dma_buffer[1], &data->block[1], dma_size - 1);
} else {
/* i2c Block Read */
dev_dbg(dev, "I2C_SMBUS_I2C_BLOCK_DATA: READ\n");
@@ -557,23 +560,22 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr,
if (dma_size != 0) {
dev_dbg(dev, " dev=%p\n", dev);
dev_dbg(dev, " data=%p\n", data);
- dev_dbg(dev, " dma_buffer=%p\n", priv->dma_buffer);
+ dev_dbg(dev, " dma_buffer=%p\n", dma_buffer);
dev_dbg(dev, " dma_size=%d\n", dma_size);
dev_dbg(dev, " dma_direction=%d\n", dma_direction);
dma_addr = dma_map_single(dev,
- priv->dma_buffer,
+ dma_buffer,
dma_size,
dma_direction);
if (dma_mapping_error(dev, dma_addr)) {
dev_err(dev, "Error in mapping dma buffer %p\n",
- priv->dma_buffer);
+ dma_buffer);
return -EIO;
}
- dev_dbg(dev, " dma_addr = 0x%016llX\n",
- (unsigned long long)dma_addr);
+ dev_dbg(dev, " dma_addr = %pad\n", &dma_addr);
desc->dptr_low = lower_32_bits(dma_addr);
desc->dptr_high = upper_32_bits(dma_addr);
diff --git a/drivers/i2c/busses/i2c-meson.c b/drivers/i2c/busses/i2c-meson.c
index 88d15b92ec35..90f5d0407d73 100644
--- a/drivers/i2c/busses/i2c-meson.c
+++ b/drivers/i2c/busses/i2c-meson.c
@@ -16,6 +16,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/types.h>
@@ -57,6 +58,10 @@ enum {
STATE_WRITE,
};
+struct meson_i2c_data {
+ unsigned char div_factor;
+};
+
/**
* struct meson_i2c - Meson I2C device private data
*
@@ -64,7 +69,6 @@ enum {
* @dev: Pointer to device structure
* @regs: Base address of the device memory mapped registers
* @clk: Pointer to clock structure
- * @irq: IRQ number
* @msg: Pointer to the current I2C message
* @state: Current state in the driver state machine
* @last: Flag set for the last message in the transfer
@@ -75,6 +79,7 @@ enum {
* @done: Completion used to wait for transfer termination
* @tokens: Sequence of tokens to be written to the device
* @num_tokens: Number of tokens
+ * @data: Pointer to the controlller's platform data
*/
struct meson_i2c {
struct i2c_adapter adap;
@@ -93,6 +98,8 @@ struct meson_i2c {
struct completion done;
u32 tokens[2];
int num_tokens;
+
+ const struct meson_i2c_data *data;
};
static void meson_i2c_set_mask(struct meson_i2c *i2c, int reg, u32 mask,
@@ -128,7 +135,7 @@ static void meson_i2c_set_clk_div(struct meson_i2c *i2c, unsigned int freq)
unsigned long clk_rate = clk_get_rate(i2c->clk);
unsigned int div;
- div = DIV_ROUND_UP(clk_rate, freq * 4);
+ div = DIV_ROUND_UP(clk_rate, freq * i2c->data->div_factor);
/* clock divider has 12 bits */
if (div >= (1 << 12)) {
@@ -376,6 +383,9 @@ static int meson_i2c_probe(struct platform_device *pdev)
spin_lock_init(&i2c->lock);
init_completion(&i2c->done);
+ i2c->data = (const struct meson_i2c_data *)
+ of_device_get_match_data(&pdev->dev);
+
i2c->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(i2c->clk)) {
dev_err(&pdev->dev, "can't get device clock\n");
@@ -440,11 +450,25 @@ static int meson_i2c_remove(struct platform_device *pdev)
return 0;
}
+static const struct meson_i2c_data i2c_meson6_data = {
+ .div_factor = 4,
+};
+
+static const struct meson_i2c_data i2c_gxbb_data = {
+ .div_factor = 4,
+};
+
+static const struct meson_i2c_data i2c_axg_data = {
+ .div_factor = 3,
+};
+
static const struct of_device_id meson_i2c_match[] = {
- { .compatible = "amlogic,meson6-i2c" },
- { .compatible = "amlogic,meson-gxbb-i2c" },
- { },
+ { .compatible = "amlogic,meson6-i2c", .data = &i2c_meson6_data },
+ { .compatible = "amlogic,meson-gxbb-i2c", .data = &i2c_gxbb_data },
+ { .compatible = "amlogic,meson-axg-i2c", .data = &i2c_axg_data },
+ {},
};
+
MODULE_DEVICE_TABLE(of, meson_i2c_match);
static struct platform_driver meson_i2c_driver = {
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 950a9d74f54d..d94f05c8b8b7 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -78,9 +78,7 @@ struct mpc_i2c_divider {
};
struct mpc_i2c_data {
- void (*setup)(struct device_node *node, struct mpc_i2c *i2c,
- u32 clock, u32 prescaler);
- u32 prescaler;
+ void (*setup)(struct device_node *node, struct mpc_i2c *i2c, u32 clock);
};
static inline void writeccr(struct mpc_i2c *i2c, u32 x)
@@ -201,7 +199,7 @@ static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
};
static int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock,
- int prescaler, u32 *real_clk)
+ u32 *real_clk)
{
const struct mpc_i2c_divider *div = NULL;
unsigned int pvr = mfspr(SPRN_PVR);
@@ -236,7 +234,7 @@ static int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock,
static void mpc_i2c_setup_52xx(struct device_node *node,
struct mpc_i2c *i2c,
- u32 clock, u32 prescaler)
+ u32 clock)
{
int ret, fdr;
@@ -246,7 +244,7 @@ static void mpc_i2c_setup_52xx(struct device_node *node,
return;
}
- ret = mpc_i2c_get_fdr_52xx(node, clock, prescaler, &i2c->real_clk);
+ ret = mpc_i2c_get_fdr_52xx(node, clock, &i2c->real_clk);
fdr = (ret >= 0) ? ret : 0x3f; /* backward compatibility */
writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR);
@@ -258,7 +256,7 @@ static void mpc_i2c_setup_52xx(struct device_node *node,
#else /* !(CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x) */
static void mpc_i2c_setup_52xx(struct device_node *node,
struct mpc_i2c *i2c,
- u32 clock, u32 prescaler)
+ u32 clock)
{
}
#endif /* CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x */
@@ -266,7 +264,7 @@ static void mpc_i2c_setup_52xx(struct device_node *node,
#ifdef CONFIG_PPC_MPC512x
static void mpc_i2c_setup_512x(struct device_node *node,
struct mpc_i2c *i2c,
- u32 clock, u32 prescaler)
+ u32 clock)
{
struct device_node *node_ctrl;
void __iomem *ctrl;
@@ -289,12 +287,12 @@ static void mpc_i2c_setup_512x(struct device_node *node,
}
/* The clock setup for the 52xx works also fine for the 512x */
- mpc_i2c_setup_52xx(node, i2c, clock, prescaler);
+ mpc_i2c_setup_52xx(node, i2c, clock);
}
#else /* CONFIG_PPC_MPC512x */
static void mpc_i2c_setup_512x(struct device_node *node,
struct mpc_i2c *i2c,
- u32 clock, u32 prescaler)
+ u32 clock)
{
}
#endif /* CONFIG_PPC_MPC512x */
@@ -332,14 +330,18 @@ static u32 mpc_i2c_get_sec_cfg_8xxx(void)
if (prop) {
/*
* Map and check POR Device Status Register 2
- * (PORDEVSR2) at 0xE0014
+ * (PORDEVSR2) at 0xE0014. Note than while MPC8533
+ * and MPC8544 indicate SEC frequency ratio
+ * configuration as bit 26 in PORDEVSR2, other MPC8xxx
+ * parts may store it differently or may not have it
+ * at all.
*/
reg = ioremap(get_immrbase() + *prop + 0x14, 0x4);
if (!reg)
printk(KERN_ERR
"Error: couldn't map PORDEVSR2\n");
else
- val = in_be32(reg) & 0x00000080; /* sec-cfg */
+ val = in_be32(reg) & 0x00000020; /* sec-cfg */
iounmap(reg);
}
}
@@ -350,7 +352,11 @@ static u32 mpc_i2c_get_sec_cfg_8xxx(void)
static u32 mpc_i2c_get_prescaler_8xxx(void)
{
- /* mpc83xx and mpc82xx all have prescaler 1 */
+ /*
+ * According to the AN2919 all MPC824x have prescaler 1, while MPC83xx
+ * may have prescaler 1, 2, or 3, depending on the power-on
+ * configuration.
+ */
u32 prescaler = 1;
/* mpc85xx */
@@ -367,6 +373,10 @@ static u32 mpc_i2c_get_prescaler_8xxx(void)
|| (SVR_SOC_VER(svr) == SVR_8610))
/* the above 85xx SoCs have prescaler 1 */
prescaler = 1;
+ else if ((SVR_SOC_VER(svr) == SVR_8533)
+ || (SVR_SOC_VER(svr) == SVR_8544))
+ /* the above 85xx SoCs have prescaler 3 or 2 */
+ prescaler = mpc_i2c_get_sec_cfg_8xxx() ? 3 : 2;
else
/* all the other 85xx have prescaler 2 */
prescaler = 2;
@@ -376,9 +386,10 @@ static u32 mpc_i2c_get_prescaler_8xxx(void)
}
static int mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock,
- u32 prescaler, u32 *real_clk)
+ u32 *real_clk)
{
const struct mpc_i2c_divider *div = NULL;
+ u32 prescaler = mpc_i2c_get_prescaler_8xxx();
u32 divider;
int i;
@@ -388,12 +399,6 @@ static int mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock,
return -EINVAL;
}
- /* Determine proper divider value */
- if (of_device_is_compatible(node, "fsl,mpc8544-i2c"))
- prescaler = mpc_i2c_get_sec_cfg_8xxx() ? 3 : 2;
- if (!prescaler)
- prescaler = mpc_i2c_get_prescaler_8xxx();
-
divider = fsl_get_sys_freq() / clock / prescaler;
pr_debug("I2C: src_clock=%d clock=%d divider=%d\n",
@@ -415,7 +420,7 @@ static int mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock,
static void mpc_i2c_setup_8xxx(struct device_node *node,
struct mpc_i2c *i2c,
- u32 clock, u32 prescaler)
+ u32 clock)
{
int ret, fdr;
@@ -426,7 +431,7 @@ static void mpc_i2c_setup_8xxx(struct device_node *node,
return;
}
- ret = mpc_i2c_get_fdr_8xxx(node, clock, prescaler, &i2c->real_clk);
+ ret = mpc_i2c_get_fdr_8xxx(node, clock, &i2c->real_clk);
fdr = (ret >= 0) ? ret : 0x1031; /* backward compatibility */
writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR);
@@ -440,7 +445,7 @@ static void mpc_i2c_setup_8xxx(struct device_node *node,
#else /* !CONFIG_FSL_SOC */
static void mpc_i2c_setup_8xxx(struct device_node *node,
struct mpc_i2c *i2c,
- u32 clock, u32 prescaler)
+ u32 clock)
{
}
#endif /* CONFIG_FSL_SOC */
@@ -711,11 +716,11 @@ static int fsl_i2c_probe(struct platform_device *op)
if (match->data) {
const struct mpc_i2c_data *data = match->data;
- data->setup(op->dev.of_node, i2c, clock, data->prescaler);
+ data->setup(op->dev.of_node, i2c, clock);
} else {
/* Backwards compatibility */
if (of_get_property(op->dev.of_node, "dfsrr", NULL))
- mpc_i2c_setup_8xxx(op->dev.of_node, i2c, clock, 0);
+ mpc_i2c_setup_8xxx(op->dev.of_node, i2c, clock);
}
prop = of_get_property(op->dev.of_node, "fsl,timeout", &plen);
@@ -813,12 +818,10 @@ static const struct mpc_i2c_data mpc_i2c_data_8313 = {
static const struct mpc_i2c_data mpc_i2c_data_8543 = {
.setup = mpc_i2c_setup_8xxx,
- .prescaler = 2,
};
static const struct mpc_i2c_data mpc_i2c_data_8544 = {
.setup = mpc_i2c_setup_8xxx,
- .prescaler = 3,
};
static const struct of_device_id mpc_i2c_of_match[] = {
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 09d288ce0ddb..cf23a746cc17 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -61,6 +61,7 @@
#define I2C_DMA_HARD_RST 0x0002
#define I2C_DMA_4G_MODE 0x0001
+#define I2C_DEFAULT_CLK_DIV 5
#define I2C_DEFAULT_SPEED 100000 /* hz */
#define MAX_FS_MODE_SPEED 400000
#define MAX_HS_MODE_SPEED 3400000
@@ -127,6 +128,7 @@ enum I2C_REGS_OFFSET {
OFFSET_DEBUGSTAT = 0x64,
OFFSET_DEBUGCTRL = 0x68,
OFFSET_TRANSFER_LEN_AUX = 0x6c,
+ OFFSET_CLOCK_DIV = 0x70,
};
struct mtk_i2c_compatible {
@@ -136,6 +138,7 @@ struct mtk_i2c_compatible {
unsigned char auto_restart: 1;
unsigned char aux_len_reg: 1;
unsigned char support_33bits: 1;
+ unsigned char timing_adjust: 1;
};
struct mtk_i2c {
@@ -176,6 +179,15 @@ static const struct i2c_adapter_quirks mt7622_i2c_quirks = {
.max_num_msgs = 255,
};
+static const struct mtk_i2c_compatible mt2712_compat = {
+ .pmic_i2c = 0,
+ .dcm = 1,
+ .auto_restart = 1,
+ .aux_len_reg = 1,
+ .support_33bits = 1,
+ .timing_adjust = 1,
+};
+
static const struct mtk_i2c_compatible mt6577_compat = {
.quirks = &mt6577_i2c_quirks,
.pmic_i2c = 0,
@@ -183,6 +195,7 @@ static const struct mtk_i2c_compatible mt6577_compat = {
.auto_restart = 0,
.aux_len_reg = 0,
.support_33bits = 0,
+ .timing_adjust = 0,
};
static const struct mtk_i2c_compatible mt6589_compat = {
@@ -192,6 +205,7 @@ static const struct mtk_i2c_compatible mt6589_compat = {
.auto_restart = 0,
.aux_len_reg = 0,
.support_33bits = 0,
+ .timing_adjust = 0,
};
static const struct mtk_i2c_compatible mt7622_compat = {
@@ -201,6 +215,7 @@ static const struct mtk_i2c_compatible mt7622_compat = {
.auto_restart = 1,
.aux_len_reg = 1,
.support_33bits = 0,
+ .timing_adjust = 0,
};
static const struct mtk_i2c_compatible mt8173_compat = {
@@ -209,9 +224,11 @@ static const struct mtk_i2c_compatible mt8173_compat = {
.auto_restart = 1,
.aux_len_reg = 1,
.support_33bits = 1,
+ .timing_adjust = 0,
};
static const struct of_device_id mtk_i2c_of_match[] = {
+ { .compatible = "mediatek,mt2712-i2c", .data = &mt2712_compat },
{ .compatible = "mediatek,mt6577-i2c", .data = &mt6577_compat },
{ .compatible = "mediatek,mt6589-i2c", .data = &mt6589_compat },
{ .compatible = "mediatek,mt7622-i2c", .data = &mt7622_compat },
@@ -271,6 +288,9 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
if (i2c->dev_comp->dcm)
writew(I2C_DCM_DISABLE, i2c->base + OFFSET_DCM_EN);
+ if (i2c->dev_comp->timing_adjust)
+ writew(I2C_DEFAULT_CLK_DIV - 1, i2c->base + OFFSET_CLOCK_DIV);
+
writew(i2c->timing_reg, i2c->base + OFFSET_TIMING);
writew(i2c->high_speed_reg, i2c->base + OFFSET_HS);
@@ -725,10 +745,6 @@ static int mtk_i2c_probe(struct platform_device *pdev)
if (!i2c)
return -ENOMEM;
- ret = mtk_i2c_parse_dt(pdev->dev.of_node, i2c);
- if (ret)
- return -EINVAL;
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
i2c->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(i2c->base))
@@ -759,6 +775,13 @@ static int mtk_i2c_probe(struct platform_device *pdev)
i2c->adap.timeout = 2 * HZ;
i2c->adap.retries = 1;
+ ret = mtk_i2c_parse_dt(pdev->dev.of_node, i2c);
+ if (ret)
+ return -EINVAL;
+
+ if (i2c->dev_comp->timing_adjust)
+ i2c->clk_src_div *= I2C_DEFAULT_CLK_DIV;
+
if (i2c->have_pmic && !i2c->dev_comp->pmic_i2c)
return -EINVAL;
@@ -838,10 +861,19 @@ static int mtk_i2c_remove(struct platform_device *pdev)
#ifdef CONFIG_PM_SLEEP
static int mtk_i2c_resume(struct device *dev)
{
+ int ret;
struct mtk_i2c *i2c = dev_get_drvdata(dev);
+ ret = mtk_i2c_clock_enable(i2c);
+ if (ret) {
+ dev_err(dev, "clock enable failed!\n");
+ return ret;
+ }
+
mtk_i2c_init_hw(i2c);
+ mtk_i2c_clock_disable(i2c);
+
return 0;
}
#endif
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index a832c45276a4..440fe4a96e68 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -135,6 +135,7 @@ struct mv64xxx_i2c_data {
u32 freq_m;
u32 freq_n;
struct clk *clk;
+ struct clk *reg_clk;
wait_queue_head_t waitq;
spinlock_t lock;
struct i2c_msg *msg;
@@ -894,13 +895,20 @@ mv64xxx_i2c_probe(struct platform_device *pd)
init_waitqueue_head(&drv_data->waitq);
spin_lock_init(&drv_data->lock);
- /* Not all platforms have a clk */
+ /* Not all platforms have clocks */
drv_data->clk = devm_clk_get(&pd->dev, NULL);
if (IS_ERR(drv_data->clk) && PTR_ERR(drv_data->clk) == -EPROBE_DEFER)
return -EPROBE_DEFER;
if (!IS_ERR(drv_data->clk))
clk_prepare_enable(drv_data->clk);
+ drv_data->reg_clk = devm_clk_get(&pd->dev, "reg");
+ if (IS_ERR(drv_data->reg_clk) &&
+ PTR_ERR(drv_data->reg_clk) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ if (!IS_ERR(drv_data->reg_clk))
+ clk_prepare_enable(drv_data->reg_clk);
+
drv_data->irq = platform_get_irq(pd, 0);
if (pdata) {
@@ -950,9 +958,8 @@ exit_free_irq:
exit_reset:
reset_control_assert(drv_data->rstc);
exit_clk:
- /* Not all platforms have a clk */
- if (!IS_ERR(drv_data->clk))
- clk_disable_unprepare(drv_data->clk);
+ clk_disable_unprepare(drv_data->reg_clk);
+ clk_disable_unprepare(drv_data->clk);
return rc;
}
@@ -965,9 +972,8 @@ mv64xxx_i2c_remove(struct platform_device *dev)
i2c_del_adapter(&drv_data->adapter);
free_irq(drv_data->irq, drv_data);
reset_control_assert(drv_data->rstc);
- /* Not all platforms have a clk */
- if (!IS_ERR(drv_data->clk))
- clk_disable_unprepare(drv_data->clk);
+ clk_disable_unprepare(drv_data->reg_clk);
+ clk_disable_unprepare(drv_data->clk);
return 0;
}
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index d4e8f1954f23..e617bd600794 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -181,7 +181,7 @@ static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap,
struct mxs_i2c_dev *i2c = i2c_get_adapdata(adap);
if (msg->flags & I2C_M_RD) {
- i2c->dma_read = 1;
+ i2c->dma_read = true;
i2c->addr_data = (msg->addr << 1) | I2C_SMBUS_READ;
/*
@@ -239,7 +239,7 @@ static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap,
goto read_init_dma_fail;
}
} else {
- i2c->dma_read = 0;
+ i2c->dma_read = false;
i2c->addr_data = (msg->addr << 1) | I2C_SMBUS_WRITE;
/*
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index 15d764afec3b..4159ebcec2bb 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -62,7 +62,7 @@
#define MIE (1 << 3) /* master if enable */
#define TSBE (1 << 2)
#define FSB (1 << 1) /* force stop bit */
-#define ESG (1 << 0) /* en startbit gen */
+#define ESG (1 << 0) /* enable start bit gen */
/* ICSSR (also for ICSIER) */
#define GCAR (1 << 6) /* general call received */
@@ -132,6 +132,7 @@ struct rcar_i2c_priv {
int pos;
u32 icccr;
u32 flags;
+ u8 recovery_icmcr; /* protected by adapter lock */
enum rcar_i2c_type devtype;
struct i2c_client *slave;
@@ -158,6 +159,46 @@ static u32 rcar_i2c_read(struct rcar_i2c_priv *priv, int reg)
return readl(priv->io + reg);
}
+static int rcar_i2c_get_scl(struct i2c_adapter *adap)
+{
+ struct rcar_i2c_priv *priv = i2c_get_adapdata(adap);
+
+ return !!(rcar_i2c_read(priv, ICMCR) & FSCL);
+
+};
+
+static void rcar_i2c_set_scl(struct i2c_adapter *adap, int val)
+{
+ struct rcar_i2c_priv *priv = i2c_get_adapdata(adap);
+
+ if (val)
+ priv->recovery_icmcr |= FSCL;
+ else
+ priv->recovery_icmcr &= ~FSCL;
+
+ rcar_i2c_write(priv, ICMCR, priv->recovery_icmcr);
+};
+
+/* No get_sda, because the HW only reports its bus free logic, not SDA itself */
+
+static void rcar_i2c_set_sda(struct i2c_adapter *adap, int val)
+{
+ struct rcar_i2c_priv *priv = i2c_get_adapdata(adap);
+
+ if (val)
+ priv->recovery_icmcr |= FSDA;
+ else
+ priv->recovery_icmcr &= ~FSDA;
+
+ rcar_i2c_write(priv, ICMCR, priv->recovery_icmcr);
+};
+
+static struct i2c_bus_recovery_info rcar_i2c_bri = {
+ .get_scl = rcar_i2c_get_scl,
+ .set_scl = rcar_i2c_set_scl,
+ .set_sda = rcar_i2c_set_sda,
+ .recover_bus = i2c_generic_scl_recovery,
+};
static void rcar_i2c_init(struct rcar_i2c_priv *priv)
{
/* reset master mode */
@@ -170,7 +211,7 @@ static void rcar_i2c_init(struct rcar_i2c_priv *priv)
static int rcar_i2c_bus_barrier(struct rcar_i2c_priv *priv)
{
- int i;
+ int i, ret;
for (i = 0; i < LOOP_TIMEOUT; i++) {
/* make sure that bus is not busy */
@@ -179,7 +220,15 @@ static int rcar_i2c_bus_barrier(struct rcar_i2c_priv *priv)
udelay(1);
}
- return -EBUSY;
+ /* Waiting did not help, try to recover */
+ priv->recovery_icmcr = MDBS | OBPC | FSDA | FSCL;
+ ret = i2c_recover_bus(&priv->adap);
+
+ /* No failure when recovering, so check bus busy bit again */
+ if (ret == 0)
+ ret = (rcar_i2c_read(priv, ICMCR) & FSDA) ? -EBUSY : 0;
+
+ return ret;
}
static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, struct i2c_timings *t)
@@ -282,7 +331,7 @@ static void rcar_i2c_prepare_msg(struct rcar_i2c_priv *priv)
rcar_i2c_write(priv, ICMAR, (priv->msg->addr << 1) | read);
/*
- * We don't have a testcase but the HW engineers say that the write order
+ * We don't have a test case but the HW engineers say that the write order
* of ICMSR and ICMCR depends on whether we issue START or REP_START. Since
* it didn't cause a drawback for me, let's rather be safe than sorry.
*/
@@ -359,7 +408,7 @@ static void rcar_i2c_dma(struct rcar_i2c_priv *priv)
int len;
/* Do not use DMA if it's not available or for messages < 8 bytes */
- if (IS_ERR(chan) || msg->len < 8)
+ if (IS_ERR(chan) || msg->len < 8 || !(msg->flags & I2C_M_DMA_SAFE))
return;
if (read) {
@@ -440,7 +489,7 @@ static void rcar_i2c_irq_send(struct rcar_i2c_priv *priv, u32 msr)
/*
* Try to use DMA to transmit the rest of the data if
- * address transfer pashe just finished.
+ * address transfer phase just finished.
*/
if (msr & MAT)
rcar_i2c_dma(priv);
@@ -851,6 +900,7 @@ static int rcar_i2c_probe(struct platform_device *pdev)
adap->retries = 3;
adap->dev.parent = dev;
adap->dev.of_node = dev->of_node;
+ adap->bus_recovery_info = &rcar_i2c_bri;
i2c_set_adapdata(adap, priv);
strlcpy(adap->name, pdev->name, sizeof(adap->name));
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index fe234578380a..e1a18d989f83 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -161,6 +161,7 @@ enum rk3x_i2c_state {
};
/**
+ * struct rk3x_i2c_soc_data:
* @grf_offset: offset inside the grf regmap for setting the i2c type
* @calc_timings: Callback function for i2c timing information calculated
*/
@@ -194,7 +195,7 @@ struct rk3x_i2c_soc_data {
struct rk3x_i2c {
struct i2c_adapter adap;
struct device *dev;
- struct rk3x_i2c_soc_data *soc_data;
+ const struct rk3x_i2c_soc_data *soc_data;
/* Hardware resources */
void __iomem *regs;
@@ -1164,27 +1165,27 @@ static const struct rk3x_i2c_soc_data rk3399_soc_data = {
static const struct of_device_id rk3x_i2c_match[] = {
{
.compatible = "rockchip,rv1108-i2c",
- .data = (void *)&rv1108_soc_data
+ .data = &rv1108_soc_data
},
{
.compatible = "rockchip,rk3066-i2c",
- .data = (void *)&rk3066_soc_data
+ .data = &rk3066_soc_data
},
{
.compatible = "rockchip,rk3188-i2c",
- .data = (void *)&rk3188_soc_data
+ .data = &rk3188_soc_data
},
{
.compatible = "rockchip,rk3228-i2c",
- .data = (void *)&rk3228_soc_data
+ .data = &rk3228_soc_data
},
{
.compatible = "rockchip,rk3288-i2c",
- .data = (void *)&rk3288_soc_data
+ .data = &rk3288_soc_data
},
{
.compatible = "rockchip,rk3399-i2c",
- .data = (void *)&rk3399_soc_data
+ .data = &rk3399_soc_data
},
{},
};
@@ -1207,7 +1208,7 @@ static int rk3x_i2c_probe(struct platform_device *pdev)
return -ENOMEM;
match = of_match_node(rk3x_i2c_match, np);
- i2c->soc_data = (struct rk3x_i2c_soc_data *)match->data;
+ i2c->soc_data = match->data;
/* use common interface to get I2C timing properties */
i2c_parse_fw_timings(&pdev->dev, &i2c->t, true);
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index c03acdf71397..d856bc211715 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -40,21 +40,21 @@
/* BUS: S A8 ACK P(*) */
/* IRQ: DTE WAIT */
/* ICIC: */
-/* ICCR: 0x94 0x90 */
+/* ICCR: 0x94 0x90 */
/* ICDR: A8 */
/* */
/* 1 byte transmit */
/* BUS: S A8 ACK D8(1) ACK P(*) */
/* IRQ: DTE WAIT WAIT */
/* ICIC: -DTE */
-/* ICCR: 0x94 0x90 */
+/* ICCR: 0x94 0x90 */
/* ICDR: A8 D8(1) */
/* */
/* 2 byte transmit */
/* BUS: S A8 ACK D8(1) ACK D8(2) ACK P(*) */
/* IRQ: DTE WAIT WAIT WAIT */
/* ICIC: -DTE */
-/* ICCR: 0x94 0x90 */
+/* ICCR: 0x94 0x90 */
/* ICDR: A8 D8(1) D8(2) */
/* */
/* 3 bytes or more, +---------+ gets repeated */
@@ -113,7 +113,6 @@ enum sh_mobile_i2c_op {
OP_TX_FIRST,
OP_TX,
OP_TX_STOP,
- OP_TX_STOP_DATA,
OP_TX_TO_RX,
OP_RX,
OP_RX_STOP,
@@ -145,11 +144,12 @@ struct sh_mobile_i2c_data {
struct dma_chan *dma_rx;
struct scatterlist sg;
enum dma_data_direction dma_direction;
+ u8 *dma_buf;
};
struct sh_mobile_dt_config {
int clks_per_count;
- void (*setup)(struct sh_mobile_i2c_data *pd);
+ int (*setup)(struct sh_mobile_i2c_data *pd);
};
#define IIC_FLAG_HAS_ICIC67 (1 << 0)
@@ -246,36 +246,10 @@ static u32 sh_mobile_i2c_icch(unsigned long count_khz, u32 tHIGH, u32 tf)
return (((count_khz * (tHIGH + tf)) + 5000) / 10000);
}
-static int sh_mobile_i2c_init(struct sh_mobile_i2c_data *pd)
+static int sh_mobile_i2c_check_timing(struct sh_mobile_i2c_data *pd)
{
- unsigned long i2c_clk_khz;
- u32 tHIGH, tLOW, tf;
- uint16_t max_val;
-
- /* Get clock rate after clock is enabled */
- clk_prepare_enable(pd->clk);
- i2c_clk_khz = clk_get_rate(pd->clk) / 1000;
- clk_disable_unprepare(pd->clk);
- i2c_clk_khz /= pd->clks_per_count;
-
- if (pd->bus_speed == STANDARD_MODE) {
- tLOW = 47; /* tLOW = 4.7 us */
- tHIGH = 40; /* tHD;STA = tHIGH = 4.0 us */
- tf = 3; /* tf = 0.3 us */
- } else if (pd->bus_speed == FAST_MODE) {
- tLOW = 13; /* tLOW = 1.3 us */
- tHIGH = 6; /* tHD;STA = tHIGH = 0.6 us */
- tf = 3; /* tf = 0.3 us */
- } else {
- dev_err(pd->dev, "unrecognized bus speed %lu Hz\n",
- pd->bus_speed);
- return -EINVAL;
- }
-
- pd->iccl = sh_mobile_i2c_iccl(i2c_clk_khz, tLOW, tf);
- pd->icch = sh_mobile_i2c_icch(i2c_clk_khz, tHIGH, tf);
+ u16 max_val = pd->flags & IIC_FLAG_HAS_ICIC67 ? 0x1ff : 0xff;
- max_val = pd->flags & IIC_FLAG_HAS_ICIC67 ? 0x1ff : 0xff;
if (pd->iccl > max_val || pd->icch > max_val) {
dev_err(pd->dev, "timing values out of range: L/H=0x%x/0x%x\n",
pd->iccl, pd->icch);
@@ -298,35 +272,43 @@ static int sh_mobile_i2c_init(struct sh_mobile_i2c_data *pd)
return 0;
}
-static void activate_ch(struct sh_mobile_i2c_data *pd)
+static int sh_mobile_i2c_init(struct sh_mobile_i2c_data *pd)
{
- /* Wake up device and enable clock */
- pm_runtime_get_sync(pd->dev);
- clk_prepare_enable(pd->clk);
+ unsigned long i2c_clk_khz;
+ u32 tHIGH, tLOW, tf;
- /* Enable channel and configure rx ack */
- iic_set_clr(pd, ICCR, ICCR_ICE, 0);
+ i2c_clk_khz = clk_get_rate(pd->clk) / 1000 / pd->clks_per_count;
- /* Mask all interrupts */
- iic_wr(pd, ICIC, 0);
+ if (pd->bus_speed == STANDARD_MODE) {
+ tLOW = 47; /* tLOW = 4.7 us */
+ tHIGH = 40; /* tHD;STA = tHIGH = 4.0 us */
+ tf = 3; /* tf = 0.3 us */
+ } else if (pd->bus_speed == FAST_MODE) {
+ tLOW = 13; /* tLOW = 1.3 us */
+ tHIGH = 6; /* tHD;STA = tHIGH = 0.6 us */
+ tf = 3; /* tf = 0.3 us */
+ } else {
+ dev_err(pd->dev, "unrecognized bus speed %lu Hz\n",
+ pd->bus_speed);
+ return -EINVAL;
+ }
- /* Set the clock */
- iic_wr(pd, ICCL, pd->iccl & 0xff);
- iic_wr(pd, ICCH, pd->icch & 0xff);
+ pd->iccl = sh_mobile_i2c_iccl(i2c_clk_khz, tLOW, tf);
+ pd->icch = sh_mobile_i2c_icch(i2c_clk_khz, tHIGH, tf);
+
+ return sh_mobile_i2c_check_timing(pd);
}
-static void deactivate_ch(struct sh_mobile_i2c_data *pd)
+static int sh_mobile_i2c_v2_init(struct sh_mobile_i2c_data *pd)
{
- /* Clear/disable interrupts */
- iic_wr(pd, ICSR, 0);
- iic_wr(pd, ICIC, 0);
+ unsigned long clks_per_cycle;
- /* Disable channel */
- iic_set_clr(pd, ICCR, 0, ICCR_ICE);
+ /* L = 5, H = 4, L + H = 9 */
+ clks_per_cycle = clk_get_rate(pd->clk) / pd->bus_speed;
+ pd->iccl = DIV_ROUND_UP(clks_per_cycle * 5 / 9 - 1, pd->clks_per_count);
+ pd->icch = DIV_ROUND_UP(clks_per_cycle * 4 / 9 - 5, pd->clks_per_count);
- /* Disable clock and mark device as idle */
- clk_disable_unprepare(pd->clk);
- pm_runtime_put_sync(pd->dev);
+ return sh_mobile_i2c_check_timing(pd);
}
static unsigned char i2c_op(struct sh_mobile_i2c_data *pd,
@@ -350,10 +332,7 @@ static unsigned char i2c_op(struct sh_mobile_i2c_data *pd,
case OP_TX: /* write data */
iic_wr(pd, ICDR, data);
break;
- case OP_TX_STOP_DATA: /* write data and issue a stop afterwards */
- iic_wr(pd, ICDR, data);
- /* fallthrough */
- case OP_TX_STOP: /* issue a stop */
+ case OP_TX_STOP: /* issue a stop (or rep_start) */
iic_wr(pd, ICCR, pd->send_stop ? ICCR_ICE | ICCR_TRS
: ICCR_ICE | ICCR_TRS | ICCR_BBSY);
break;
@@ -387,11 +366,6 @@ static bool sh_mobile_i2c_is_first_byte(struct sh_mobile_i2c_data *pd)
return pd->pos == -1;
}
-static bool sh_mobile_i2c_is_last_byte(struct sh_mobile_i2c_data *pd)
-{
- return pd->pos == pd->msg->len - 1;
-}
-
static void sh_mobile_i2c_get_data(struct sh_mobile_i2c_data *pd,
unsigned char *buf)
{
@@ -409,20 +383,12 @@ static int sh_mobile_i2c_isr_tx(struct sh_mobile_i2c_data *pd)
unsigned char data;
if (pd->pos == pd->msg->len) {
- /* Send stop if we haven't yet (DMA case) */
- if (pd->send_stop && pd->stop_after_dma)
- i2c_op(pd, OP_TX_STOP, 0);
+ i2c_op(pd, OP_TX_STOP, 0);
return 1;
}
sh_mobile_i2c_get_data(pd, &data);
-
- if (sh_mobile_i2c_is_last_byte(pd))
- i2c_op(pd, OP_TX_STOP_DATA, data);
- else if (sh_mobile_i2c_is_first_byte(pd))
- i2c_op(pd, OP_TX_FIRST, data);
- else
- i2c_op(pd, OP_TX, data);
+ i2c_op(pd, sh_mobile_i2c_is_first_byte(pd) ? OP_TX_FIRST : OP_TX, data);
pd->pos++;
return 0;
@@ -464,8 +430,9 @@ static int sh_mobile_i2c_isr_rx(struct sh_mobile_i2c_data *pd)
break;
}
data = i2c_op(pd, OP_RX_STOP_DATA, 0);
- } else
+ } else if (real_pos >= 0) {
data = i2c_op(pd, OP_RX, 0);
+ }
if (real_pos >= 0)
pd->msg->buf[real_pos] = data;
@@ -548,6 +515,8 @@ static void sh_mobile_i2c_dma_callback(void *data)
pd->pos = pd->msg->len;
pd->stop_after_dma = true;
+ i2c_release_dma_safe_msg_buf(pd->msg, pd->dma_buf);
+
iic_set_clr(pd, ICIC, 0, ICIC_TDMAE | ICIC_RDMAE);
}
@@ -608,7 +577,7 @@ static void sh_mobile_i2c_xfer_dma(struct sh_mobile_i2c_data *pd)
if (IS_ERR(chan))
return;
- dma_addr = dma_map_single(chan->device->dev, pd->msg->buf, pd->msg->len, dir);
+ dma_addr = dma_map_single(chan->device->dev, pd->dma_buf, pd->msg->len, dir);
if (dma_mapping_error(chan->device->dev, dma_addr)) {
dev_dbg(pd->dev, "dma map failed, using PIO\n");
return;
@@ -651,10 +620,10 @@ static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg,
if (do_init) {
/* Initialize channel registers */
- iic_set_clr(pd, ICCR, 0, ICCR_ICE);
+ iic_wr(pd, ICCR, ICCR_SCP);
/* Enable channel and configure rx ack */
- iic_set_clr(pd, ICCR, ICCR_ICE, 0);
+ iic_wr(pd, ICCR, ICCR_ICE | ICCR_SCP);
/* Set the clock */
iic_wr(pd, ICCL, pd->iccl & 0xff);
@@ -665,7 +634,8 @@ static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg,
pd->pos = -1;
pd->sr = 0;
- if (pd->msg->len > 8)
+ pd->dma_buf = i2c_get_dma_safe_msg_buf(pd->msg, 8);
+ if (pd->dma_buf)
sh_mobile_i2c_xfer_dma(pd);
/* Enable all interrupts to begin with */
@@ -731,7 +701,8 @@ static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter,
int i;
long timeout;
- activate_ch(pd);
+ /* Wake up device and enable clock */
+ pm_runtime_get_sync(pd->dev);
/* Process all messages */
for (i = 0; i < num; i++) {
@@ -768,11 +739,13 @@ static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter,
break;
}
- deactivate_ch(pd);
+ /* Disable channel */
+ iic_wr(pd, ICCR, ICCR_SCP);
- if (!err)
- err = num;
- return err;
+ /* Disable clock and mark device as idle */
+ pm_runtime_put_sync(pd->dev);
+
+ return err ?: num;
}
static u32 sh_mobile_i2c_func(struct i2c_adapter *adapter)
@@ -789,7 +762,7 @@ static const struct i2c_algorithm sh_mobile_i2c_algorithm = {
* r8a7740 chip has lasting errata on I2C I/O pad reset.
* this is work-around for it.
*/
-static void sh_mobile_i2c_r8a7740_workaround(struct sh_mobile_i2c_data *pd)
+static int sh_mobile_i2c_r8a7740_workaround(struct sh_mobile_i2c_data *pd)
{
iic_set_clr(pd, ICCR, ICCR_ICE, 0);
iic_rd(pd, ICCR); /* dummy read */
@@ -810,14 +783,23 @@ static void sh_mobile_i2c_r8a7740_workaround(struct sh_mobile_i2c_data *pd)
udelay(10);
iic_wr(pd, ICCR, ICCR_TRS);
udelay(10);
+
+ return sh_mobile_i2c_init(pd);
}
static const struct sh_mobile_dt_config default_dt_config = {
.clks_per_count = 1,
+ .setup = sh_mobile_i2c_init,
};
static const struct sh_mobile_dt_config fast_clock_dt_config = {
.clks_per_count = 2,
+ .setup = sh_mobile_i2c_init,
+};
+
+static const struct sh_mobile_dt_config v2_freq_calc_dt_config = {
+ .clks_per_count = 2,
+ .setup = sh_mobile_i2c_v2_init,
};
static const struct sh_mobile_dt_config r8a7740_dt_config = {
@@ -828,7 +810,7 @@ static const struct sh_mobile_dt_config r8a7740_dt_config = {
static const struct of_device_id sh_mobile_i2c_dt_ids[] = {
{ .compatible = "renesas,iic-r8a73a4", .data = &fast_clock_dt_config },
{ .compatible = "renesas,iic-r8a7740", .data = &r8a7740_dt_config },
- { .compatible = "renesas,iic-r8a7790", .data = &fast_clock_dt_config },
+ { .compatible = "renesas,iic-r8a7790", .data = &v2_freq_calc_dt_config },
{ .compatible = "renesas,iic-r8a7791", .data = &fast_clock_dt_config },
{ .compatible = "renesas,iic-r8a7792", .data = &fast_clock_dt_config },
{ .compatible = "renesas,iic-r8a7793", .data = &fast_clock_dt_config },
@@ -910,32 +892,13 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
return PTR_ERR(pd->reg);
ret = of_property_read_u32(dev->dev.of_node, "clock-frequency", &bus_speed);
- pd->bus_speed = ret ? STANDARD_MODE : bus_speed;
+ pd->bus_speed = (ret || !bus_speed) ? STANDARD_MODE : bus_speed;
pd->clks_per_count = 1;
- config = of_device_get_match_data(&dev->dev);
- if (config) {
- pd->clks_per_count = config->clks_per_count;
-
- if (config->setup)
- config->setup(pd);
- }
-
- /* The IIC blocks on SH-Mobile ARM processors
- * come with two new bits in ICIC.
- */
+ /* Newer variants come with two new bits in ICIC */
if (resource_size(res) > 0x17)
pd->flags |= IIC_FLAG_HAS_ICIC67;
- ret = sh_mobile_i2c_init(pd);
- if (ret)
- return ret;
-
- /* Init DMA */
- sg_init_table(&pd->sg, 1);
- pd->dma_direction = DMA_NONE;
- pd->dma_rx = pd->dma_tx = ERR_PTR(-EPROBE_DEFER);
-
/* Enable Runtime PM for this device.
*
* Also tell the Runtime PM core to ignore children
@@ -948,6 +911,24 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
*/
pm_suspend_ignore_children(&dev->dev, true);
pm_runtime_enable(&dev->dev);
+ pm_runtime_get_sync(&dev->dev);
+
+ config = of_device_get_match_data(&dev->dev);
+ if (config) {
+ pd->clks_per_count = config->clks_per_count;
+ ret = config->setup(pd);
+ } else {
+ ret = sh_mobile_i2c_init(pd);
+ }
+
+ pm_runtime_put_sync(&dev->dev);
+ if (ret)
+ return ret;
+
+ /* Init DMA */
+ sg_init_table(&pd->sg, 1);
+ pd->dma_direction = DMA_NONE;
+ pd->dma_rx = pd->dma_tx = ERR_PTR(-EPROBE_DEFER);
/* setup the private data */
adap = &pd->adap;
generated by cgit (git 2.34.1) at 2024-04-27 09:06:12 +0000