diff options
Diffstat (limited to 'drivers/i2c/busses')
| -rw-r--r-- | drivers/i2c/busses/i2c-imx.c | 33 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-ismt.c | 4 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-pasemi-core.c | 6 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-qcom-geni.c | 6 |
4 files changed, 43 insertions, 6 deletions
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 27f969b3dc07..e9e2db68b9fb 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -179,6 +179,12 @@ struct imx_i2c_hwdata { unsigned int ndivs; unsigned int i2sr_clr_opcode; unsigned int i2cr_ien_opcode; + /* + * Errata ERR007805 or e7805: + * I2C: When the I2C clock speed is configured for 400 kHz, + * the SCL low period violates the I2C spec of 1.3 uS min. + */ + bool has_err007805; }; struct imx_i2c_dma { @@ -240,6 +246,16 @@ static const struct imx_i2c_hwdata imx21_i2c_hwdata = { }; +static const struct imx_i2c_hwdata imx6_i2c_hwdata = { + .devtype = IMX21_I2C, + .regshift = IMX_I2C_REGSHIFT, + .clk_div = imx_i2c_clk_div, + .ndivs = ARRAY_SIZE(imx_i2c_clk_div), + .i2sr_clr_opcode = I2SR_CLR_OPCODE_W0C, + .i2cr_ien_opcode = I2CR_IEN_OPCODE_1, + .has_err007805 = true, +}; + static struct imx_i2c_hwdata vf610_i2c_hwdata = { .devtype = VF610_I2C, .regshift = VF610_I2C_REGSHIFT, @@ -266,6 +282,16 @@ MODULE_DEVICE_TABLE(platform, imx_i2c_devtype); static const struct of_device_id i2c_imx_dt_ids[] = { { .compatible = "fsl,imx1-i2c", .data = &imx1_i2c_hwdata, }, { .compatible = "fsl,imx21-i2c", .data = &imx21_i2c_hwdata, }, + { .compatible = "fsl,imx6q-i2c", .data = &imx6_i2c_hwdata, }, + { .compatible = "fsl,imx6sl-i2c", .data = &imx6_i2c_hwdata, }, + { .compatible = "fsl,imx6sll-i2c", .data = &imx6_i2c_hwdata, }, + { .compatible = "fsl,imx6sx-i2c", .data = &imx6_i2c_hwdata, }, + { .compatible = "fsl,imx6ul-i2c", .data = &imx6_i2c_hwdata, }, + { .compatible = "fsl,imx7s-i2c", .data = &imx6_i2c_hwdata, }, + { .compatible = "fsl,imx8mm-i2c", .data = &imx6_i2c_hwdata, }, + { .compatible = "fsl,imx8mn-i2c", .data = &imx6_i2c_hwdata, }, + { .compatible = "fsl,imx8mp-i2c", .data = &imx6_i2c_hwdata, }, + { .compatible = "fsl,imx8mq-i2c", .data = &imx6_i2c_hwdata, }, { .compatible = "fsl,vf610-i2c", .data = &vf610_i2c_hwdata, }, { /* sentinel */ } }; @@ -551,6 +577,13 @@ static void i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, unsigned int div; int i; + if (i2c_imx->hwdata->has_err007805 && i2c_imx->bitrate > 384000) { + dev_dbg(&i2c_imx->adapter.dev, + "SoC errata ERR007805 or e7805 applies, bus frequency limited from %d Hz to 384000 Hz.\n", + i2c_imx->bitrate); + i2c_imx->bitrate = 384000; + } + /* Divider value calculation */ if (i2c_imx->cur_clk == i2c_clk_rate) return; diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c index f4820fd3dc13..c0364314877e 100644 --- a/drivers/i2c/busses/i2c-ismt.c +++ b/drivers/i2c/busses/i2c-ismt.c @@ -145,8 +145,8 @@ #define ISMT_SPGT_SPD_MASK 0xc0000000 /* SMBus Speed mask */ #define ISMT_SPGT_SPD_80K 0x00 /* 80 kHz */ #define ISMT_SPGT_SPD_100K (0x1 << 30) /* 100 kHz */ -#define ISMT_SPGT_SPD_400K (0x2 << 30) /* 400 kHz */ -#define ISMT_SPGT_SPD_1M (0x3 << 30) /* 1 MHz */ +#define ISMT_SPGT_SPD_400K (0x2U << 30) /* 400 kHz */ +#define ISMT_SPGT_SPD_1M (0x3U << 30) /* 1 MHz */ /* MSI Control Register (MSICTL) bit definitions */ diff --git a/drivers/i2c/busses/i2c-pasemi-core.c b/drivers/i2c/busses/i2c-pasemi-core.c index 7728c8460dc0..9028ffb58cc0 100644 --- a/drivers/i2c/busses/i2c-pasemi-core.c +++ b/drivers/i2c/busses/i2c-pasemi-core.c @@ -137,6 +137,12 @@ static int pasemi_i2c_xfer_msg(struct i2c_adapter *adapter, TXFIFO_WR(smbus, msg->buf[msg->len-1] | (stop ? MTXFIFO_STOP : 0)); + + if (stop) { + err = pasemi_smb_waitready(smbus); + if (err) + goto reset_out; + } } return 0; diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c index fc1dcc19f2a1..5b920f0fc7dd 100644 --- a/drivers/i2c/busses/i2c-qcom-geni.c +++ b/drivers/i2c/busses/i2c-qcom-geni.c @@ -843,10 +843,8 @@ static int geni_i2c_probe(struct platform_device *pdev) /* FIFO is disabled, so we can only use GPI DMA */ gi2c->gpi_mode = true; ret = setup_gpi_dma(gi2c); - if (ret) { - dev_err(dev, "Failed to setup GPI DMA mode:%d ret\n", ret); - return ret; - } + if (ret) + return dev_err_probe(dev, ret, "Failed to setup GPI DMA mode\n"); dev_dbg(dev, "Using GPI DMA mode for I2C\n"); } else { |