summaryrefslogtreecommitdiff
path: root/drivers/i2c/busses
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/busses')
-rw-r--r--drivers/i2c/busses/i2c-cbus-gpio.c5
-rw-r--r--drivers/i2c/busses/i2c-i801.c32
-rw-r--r--drivers/i2c/busses/i2c-mpc.c2
-rw-r--r--drivers/i2c/busses/i2c-rk3x.c4
-rw-r--r--drivers/i2c/busses/i2c-stm32f7.c45
-rw-r--r--drivers/i2c/busses/i2c-virtio.c44
6 files changed, 85 insertions, 47 deletions
diff --git a/drivers/i2c/busses/i2c-cbus-gpio.c b/drivers/i2c/busses/i2c-cbus-gpio.c
index 72df563477b1..f8639a4457d2 100644
--- a/drivers/i2c/busses/i2c-cbus-gpio.c
+++ b/drivers/i2c/busses/i2c-cbus-gpio.c
@@ -195,8 +195,9 @@ static u32 cbus_i2c_func(struct i2c_adapter *adapter)
}
static const struct i2c_algorithm cbus_i2c_algo = {
- .smbus_xfer = cbus_i2c_smbus_xfer,
- .functionality = cbus_i2c_func,
+ .smbus_xfer = cbus_i2c_smbus_xfer,
+ .smbus_xfer_atomic = cbus_i2c_smbus_xfer,
+ .functionality = cbus_i2c_func,
};
static int cbus_i2c_remove(struct platform_device *pdev)
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 05187457f88a..41446f9cc52d 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -191,6 +191,7 @@
#define SMBSLVSTS_HST_NTFY_STS BIT(0)
/* Host Notify Command register bits */
+#define SMBSLVCMD_SMBALERT_DISABLE BIT(2)
#define SMBSLVCMD_HST_NTFY_INTREN BIT(0)
#define STATUS_ERROR_FLAGS (SMBHSTSTS_FAILED | SMBHSTSTS_BUS_ERR | \
@@ -259,6 +260,7 @@ struct i801_priv {
struct i2c_adapter adapter;
unsigned long smba;
unsigned char original_hstcfg;
+ unsigned char original_hstcnt;
unsigned char original_slvcmd;
struct pci_dev *pci_dev;
unsigned int features;
@@ -641,12 +643,20 @@ static irqreturn_t i801_isr(int irq, void *dev_id)
i801_isr_byte_done(priv);
/*
- * Clear irq sources and report transaction result.
+ * Clear remaining IRQ sources: Completion of last command, errors
+ * and the SMB_ALERT signal. SMB_ALERT status is set after signal
+ * assertion independently of the interrupt generation being blocked
+ * or not so clear it always when the status is set.
+ */
+ status &= SMBHSTSTS_INTR | STATUS_ERROR_FLAGS | SMBHSTSTS_SMBALERT_STS;
+ if (status)
+ outb_p(status, SMBHSTSTS(priv));
+ status &= ~SMBHSTSTS_SMBALERT_STS; /* SMB_ALERT not reported */
+ /*
+ * Report transaction result.
* ->status must be cleared before the next transaction is started.
*/
- status &= SMBHSTSTS_INTR | STATUS_ERROR_FLAGS;
if (status) {
- outb_p(status, SMBHSTSTS(priv));
priv->status = status;
complete(&priv->done);
}
@@ -974,9 +984,13 @@ static void i801_enable_host_notify(struct i2c_adapter *adapter)
if (!(priv->features & FEATURE_HOST_NOTIFY))
return;
- if (!(SMBSLVCMD_HST_NTFY_INTREN & priv->original_slvcmd))
- outb_p(SMBSLVCMD_HST_NTFY_INTREN | priv->original_slvcmd,
- SMBSLVCMD(priv));
+ /*
+ * Enable host notify interrupt and block the generation of interrupt
+ * from the SMB_ALERT signal because the driver does not support
+ * SMBus Alert.
+ */
+ outb_p(SMBSLVCMD_HST_NTFY_INTREN | SMBSLVCMD_SMBALERT_DISABLE |
+ priv->original_slvcmd, SMBSLVCMD(priv));
/* clear Host Notify bit to allow a new notification */
outb_p(SMBSLVSTS_HST_NTFY_STS, SMBSLVSTS(priv));
@@ -1805,7 +1819,8 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
outb_p(inb_p(SMBAUXCTL(priv)) &
~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
- /* Remember original Host Notify setting */
+ /* Remember original Interrupt and Host Notify settings */
+ priv->original_hstcnt = inb_p(SMBHSTCNT(priv)) & ~SMBHSTCNT_KILL;
if (priv->features & FEATURE_HOST_NOTIFY)
priv->original_slvcmd = inb_p(SMBSLVCMD(priv));
@@ -1869,6 +1884,7 @@ static void i801_remove(struct pci_dev *dev)
{
struct i801_priv *priv = pci_get_drvdata(dev);
+ outb_p(priv->original_hstcnt, SMBHSTCNT(priv));
i801_disable_host_notify(priv);
i801_del_mux(priv);
i2c_del_adapter(&priv->adapter);
@@ -1892,6 +1908,7 @@ static void i801_shutdown(struct pci_dev *dev)
struct i801_priv *priv = pci_get_drvdata(dev);
/* Restore config registers to avoid hard hang on some systems */
+ outb_p(priv->original_hstcnt, SMBHSTCNT(priv));
i801_disable_host_notify(priv);
pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
}
@@ -1901,6 +1918,7 @@ static int i801_suspend(struct device *dev)
{
struct i801_priv *priv = dev_get_drvdata(dev);
+ outb_p(priv->original_hstcnt, SMBHSTCNT(priv));
pci_write_config_byte(priv->pci_dev, SMBHSTCFG, priv->original_hstcfg);
return 0;
}
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index a6ea1eb1394e..53b8da6dbb23 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -636,7 +636,7 @@ static irqreturn_t mpc_i2c_isr(int irq, void *dev_id)
status = readb(i2c->base + MPC_I2C_SR);
if (status & CSR_MIF) {
/* Wait up to 100us for transfer to properly complete */
- readb_poll_timeout(i2c->base + MPC_I2C_SR, status, !(status & CSR_MCF), 0, 100);
+ readb_poll_timeout_atomic(i2c->base + MPC_I2C_SR, status, status & CSR_MCF, 0, 100);
writeb(0, i2c->base + MPC_I2C_SR);
mpc_i2c_do_intr(i2c, status);
return IRQ_HANDLED;
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index 819ab4ee517e..02ddb237f69a 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -423,8 +423,8 @@ static void rk3x_i2c_handle_read(struct rk3x_i2c *i2c, unsigned int ipd)
if (!(ipd & REG_INT_MBRF))
return;
- /* ack interrupt */
- i2c_writel(i2c, REG_INT_MBRF, REG_IPD);
+ /* ack interrupt (read also produces a spurious START flag, clear it too) */
+ i2c_writel(i2c, REG_INT_MBRF | REG_INT_START, REG_IPD);
/* Can only handle a maximum of 32 bytes at a time */
if (len > 32)
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index b9b19a2a2ffa..66145d2b9b55 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -1493,6 +1493,7 @@ static irqreturn_t stm32f7_i2c_isr_event(int irq, void *data)
{
struct stm32f7_i2c_dev *i2c_dev = data;
struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+ struct stm32_i2c_dma *dma = i2c_dev->dma;
void __iomem *base = i2c_dev->base;
u32 status, mask;
int ret = IRQ_HANDLED;
@@ -1518,6 +1519,10 @@ static irqreturn_t stm32f7_i2c_isr_event(int irq, void *data)
dev_dbg(i2c_dev->dev, "<%s>: Receive NACK (addr %x)\n",
__func__, f7_msg->addr);
writel_relaxed(STM32F7_I2C_ICR_NACKCF, base + STM32F7_I2C_ICR);
+ if (i2c_dev->use_dma) {
+ stm32f7_i2c_disable_dma_req(i2c_dev);
+ dmaengine_terminate_async(dma->chan_using);
+ }
f7_msg->result = -ENXIO;
}
@@ -1533,7 +1538,7 @@ static irqreturn_t stm32f7_i2c_isr_event(int irq, void *data)
/* Clear STOP flag */
writel_relaxed(STM32F7_I2C_ICR_STOPCF, base + STM32F7_I2C_ICR);
- if (i2c_dev->use_dma) {
+ if (i2c_dev->use_dma && !f7_msg->result) {
ret = IRQ_WAKE_THREAD;
} else {
i2c_dev->master_mode = false;
@@ -1546,7 +1551,7 @@ static irqreturn_t stm32f7_i2c_isr_event(int irq, void *data)
if (f7_msg->stop) {
mask = STM32F7_I2C_CR2_STOP;
stm32f7_i2c_set_bits(base + STM32F7_I2C_CR2, mask);
- } else if (i2c_dev->use_dma) {
+ } else if (i2c_dev->use_dma && !f7_msg->result) {
ret = IRQ_WAKE_THREAD;
} else if (f7_msg->smbus) {
stm32f7_i2c_smbus_rep_start(i2c_dev);
@@ -1583,7 +1588,7 @@ static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data)
if (!ret) {
dev_dbg(i2c_dev->dev, "<%s>: Timed out\n", __func__);
stm32f7_i2c_disable_dma_req(i2c_dev);
- dmaengine_terminate_all(dma->chan_using);
+ dmaengine_terminate_async(dma->chan_using);
f7_msg->result = -ETIMEDOUT;
}
@@ -1660,7 +1665,7 @@ static irqreturn_t stm32f7_i2c_isr_error(int irq, void *data)
/* Disable dma */
if (i2c_dev->use_dma) {
stm32f7_i2c_disable_dma_req(i2c_dev);
- dmaengine_terminate_all(dma->chan_using);
+ dmaengine_terminate_async(dma->chan_using);
}
i2c_dev->master_mode = false;
@@ -1696,12 +1701,26 @@ static int stm32f7_i2c_xfer(struct i2c_adapter *i2c_adap,
time_left = wait_for_completion_timeout(&i2c_dev->complete,
i2c_dev->adap.timeout);
ret = f7_msg->result;
+ if (ret) {
+ if (i2c_dev->use_dma)
+ dmaengine_synchronize(dma->chan_using);
+
+ /*
+ * It is possible that some unsent data have already been
+ * written into TXDR. To avoid sending old data in a
+ * further transfer, flush TXDR in case of any error
+ */
+ writel_relaxed(STM32F7_I2C_ISR_TXE,
+ i2c_dev->base + STM32F7_I2C_ISR);
+ goto pm_free;
+ }
if (!time_left) {
dev_dbg(i2c_dev->dev, "Access to slave 0x%x timed out\n",
i2c_dev->msg->addr);
if (i2c_dev->use_dma)
- dmaengine_terminate_all(dma->chan_using);
+ dmaengine_terminate_sync(dma->chan_using);
+ stm32f7_i2c_wait_free_bus(i2c_dev);
ret = -ETIMEDOUT;
}
@@ -1744,13 +1763,25 @@ static int stm32f7_i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
timeout = wait_for_completion_timeout(&i2c_dev->complete,
i2c_dev->adap.timeout);
ret = f7_msg->result;
- if (ret)
+ if (ret) {
+ if (i2c_dev->use_dma)
+ dmaengine_synchronize(dma->chan_using);
+
+ /*
+ * It is possible that some unsent data have already been
+ * written into TXDR. To avoid sending old data in a
+ * further transfer, flush TXDR in case of any error
+ */
+ writel_relaxed(STM32F7_I2C_ISR_TXE,
+ i2c_dev->base + STM32F7_I2C_ISR);
goto pm_free;
+ }
if (!timeout) {
dev_dbg(dev, "Access to slave 0x%x timed out\n", f7_msg->addr);
if (i2c_dev->use_dma)
- dmaengine_terminate_all(dma->chan_using);
+ dmaengine_terminate_sync(dma->chan_using);
+ stm32f7_i2c_wait_free_bus(i2c_dev);
ret = -ETIMEDOUT;
goto pm_free;
}
diff --git a/drivers/i2c/busses/i2c-virtio.c b/drivers/i2c/busses/i2c-virtio.c
index 1ed4daa918a0..41eb0dcc3204 100644
--- a/drivers/i2c/busses/i2c-virtio.c
+++ b/drivers/i2c/busses/i2c-virtio.c
@@ -22,24 +22,24 @@
/**
* struct virtio_i2c - virtio I2C data
* @vdev: virtio device for this controller
- * @completion: completion of virtio I2C message
* @adap: I2C adapter for this controller
* @vq: the virtio virtqueue for communication
*/
struct virtio_i2c {
struct virtio_device *vdev;
- struct completion completion;
struct i2c_adapter adap;
struct virtqueue *vq;
};
/**
* struct virtio_i2c_req - the virtio I2C request structure
+ * @completion: completion of virtio I2C message
* @out_hdr: the OUT header of the virtio I2C message
* @buf: the buffer into which data is read, or from which it's written
* @in_hdr: the IN header of the virtio I2C message
*/
struct virtio_i2c_req {
+ struct completion completion;
struct virtio_i2c_out_hdr out_hdr ____cacheline_aligned;
uint8_t *buf ____cacheline_aligned;
struct virtio_i2c_in_hdr in_hdr ____cacheline_aligned;
@@ -47,9 +47,11 @@ struct virtio_i2c_req {
static void virtio_i2c_msg_done(struct virtqueue *vq)
{
- struct virtio_i2c *vi = vq->vdev->priv;
+ struct virtio_i2c_req *req;
+ unsigned int len;
- complete(&vi->completion);
+ while ((req = virtqueue_get_buf(vq, &len)))
+ complete(&req->completion);
}
static int virtio_i2c_prepare_reqs(struct virtqueue *vq,
@@ -62,6 +64,8 @@ static int virtio_i2c_prepare_reqs(struct virtqueue *vq,
for (i = 0; i < num; i++) {
int outcnt = 0, incnt = 0;
+ init_completion(&reqs[i].completion);
+
/*
* Only 7-bit mode supported for this moment. For the address
* format, Please check the Virtio I2C Specification.
@@ -104,24 +108,17 @@ static int virtio_i2c_prepare_reqs(struct virtqueue *vq,
static int virtio_i2c_complete_reqs(struct virtqueue *vq,
struct virtio_i2c_req *reqs,
- struct i2c_msg *msgs, int num,
- bool timedout)
+ struct i2c_msg *msgs, int num)
{
- struct virtio_i2c_req *req;
- bool failed = timedout;
- unsigned int len;
+ bool failed = false;
int i, j = 0;
for (i = 0; i < num; i++) {
- /* Detach the ith request from the vq */
- req = virtqueue_get_buf(vq, &len);
+ struct virtio_i2c_req *req = &reqs[i];
- /*
- * Condition req == &reqs[i] should always meet since we have
- * total num requests in the vq. reqs[i] can never be NULL here.
- */
- if (!failed && (WARN_ON(req != &reqs[i]) ||
- req->in_hdr.status != VIRTIO_I2C_MSG_OK))
+ wait_for_completion(&req->completion);
+
+ if (!failed && req->in_hdr.status != VIRTIO_I2C_MSG_OK)
failed = true;
i2c_put_dma_safe_msg_buf(reqs[i].buf, &msgs[i], !failed);
@@ -130,7 +127,7 @@ static int virtio_i2c_complete_reqs(struct virtqueue *vq,
j++;
}
- return timedout ? -ETIMEDOUT : j;
+ return j;
}
static int virtio_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
@@ -139,7 +136,6 @@ static int virtio_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
struct virtio_i2c *vi = i2c_get_adapdata(adap);
struct virtqueue *vq = vi->vq;
struct virtio_i2c_req *reqs;
- unsigned long time_left;
int count;
reqs = kcalloc(num, sizeof(*reqs), GFP_KERNEL);
@@ -158,15 +154,9 @@ static int virtio_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
* remote here to clear the virtqueue, so we can try another set of
* messages later on.
*/
-
- reinit_completion(&vi->completion);
virtqueue_kick(vq);
- time_left = wait_for_completion_timeout(&vi->completion, adap->timeout);
- if (!time_left)
- dev_err(&adap->dev, "virtio i2c backend timeout.\n");
-
- count = virtio_i2c_complete_reqs(vq, reqs, msgs, count, !time_left);
+ count = virtio_i2c_complete_reqs(vq, reqs, msgs, count);
err_free:
kfree(reqs);
@@ -214,8 +204,6 @@ static int virtio_i2c_probe(struct virtio_device *vdev)
vdev->priv = vi;
vi->vdev = vdev;
- init_completion(&vi->completion);
-
ret = virtio_i2c_setup_vqs(vi);
if (ret)
return ret;
generated by cgit (git 2.34.1) at 2024-04-27 21:06:38 +0000