summaryrefslogtreecommitdiff
path: root/drivers/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/Kconfig7
-rw-r--r--drivers/i2c/algos/i2c-algo-pca.c3
-rw-r--r--drivers/i2c/busses/i2c-cadence.c28
-rw-r--r--drivers/i2c/busses/i2c-designware-common.c25
-rw-r--r--drivers/i2c/busses/i2c-designware-core.h3
-rw-r--r--drivers/i2c/busses/i2c-designware-pcidrv.c2
-rw-r--r--drivers/i2c/busses/i2c-designware-platdrv.c17
-rw-r--r--drivers/i2c/busses/i2c-eg20t.c1
-rw-r--r--drivers/i2c/busses/i2c-fsi.c2
-rw-r--r--drivers/i2c/busses/i2c-mlxcpld.c4
-rw-r--r--drivers/i2c/busses/i2c-qcom-geni.c6
-rw-r--r--drivers/i2c/busses/i2c-rcar.c3
-rw-r--r--drivers/i2c/i2c-core-base.c25
-rw-r--r--drivers/i2c/i2c-core-smbus.c9
14 files changed, 74 insertions, 61 deletions
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index ef39c83aaf33..bae1dc08ec9a 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -113,11 +113,18 @@ config I2C_STUB
config I2C_SLAVE
bool "I2C slave support"
+ help
+ This enables Linux to act as an I2C slave device. Note that your I2C
+ bus master driver also needs to support this functionality. Please
+ read Documentation/i2c/slave-interface.rst for further details.
if I2C_SLAVE
config I2C_SLAVE_EEPROM
tristate "I2C eeprom slave driver"
+ help
+ This backend makes Linux behave like an I2C EEPROM. Please read
+ Documentation/i2c/slave-eeprom-backend.rst for further details.
endif
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index 7f10312d1b88..388978775be0 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -314,7 +314,8 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
DEB2("BUS ERROR - SDA Stuck low\n");
pca_reset(adap);
goto out;
- case 0x90: /* Bus error - SCL stuck low */
+ case 0x78: /* Bus error - SCL stuck low (PCA9665) */
+ case 0x90: /* Bus error - SCL stuck low (PCA9564) */
DEB2("BUS ERROR - SCL Stuck low\n");
pca_reset(adap);
goto out;
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index 4b72398af505..e4b7f2a951ad 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -421,20 +421,21 @@ static irqreturn_t cdns_i2c_master_isr(void *ptr)
/* Read data if receive data valid is set */
while (cdns_i2c_readreg(CDNS_I2C_SR_OFFSET) &
CDNS_I2C_SR_RXDV) {
- /*
- * Clear hold bit that was set for FIFO control if
- * RX data left is less than FIFO depth, unless
- * repeated start is selected.
- */
- if ((id->recv_count < CDNS_I2C_FIFO_DEPTH) &&
- !id->bus_hold_flag)
- cdns_i2c_clear_bus_hold(id);
-
if (id->recv_count > 0) {
*(id->p_recv_buf)++ =
cdns_i2c_readreg(CDNS_I2C_DATA_OFFSET);
id->recv_count--;
id->curr_recv_count--;
+
+ /*
+ * Clear hold bit that was set for FIFO control
+ * if RX data left is less than or equal to
+ * FIFO DEPTH unless repeated start is selected
+ */
+ if (id->recv_count <= CDNS_I2C_FIFO_DEPTH &&
+ !id->bus_hold_flag)
+ cdns_i2c_clear_bus_hold(id);
+
} else {
dev_err(id->adap.dev.parent,
"xfer_size reg rollover. xfer aborted!\n");
@@ -594,10 +595,8 @@ static void cdns_i2c_mrecv(struct cdns_i2c *id)
* Check for the message size against FIFO depth and set the
* 'hold bus' bit if it is greater than FIFO depth.
*/
- if ((id->recv_count > CDNS_I2C_FIFO_DEPTH) || id->bus_hold_flag)
+ if (id->recv_count > CDNS_I2C_FIFO_DEPTH)
ctrl_reg |= CDNS_I2C_CR_HOLD;
- else
- ctrl_reg = ctrl_reg & ~CDNS_I2C_CR_HOLD;
cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
@@ -654,11 +653,8 @@ static void cdns_i2c_msend(struct cdns_i2c *id)
* Check for the message size against FIFO depth and set the
* 'hold bus' bit if it is greater than FIFO depth.
*/
- if ((id->send_count > CDNS_I2C_FIFO_DEPTH) || id->bus_hold_flag)
+ if (id->send_count > CDNS_I2C_FIFO_DEPTH)
ctrl_reg |= CDNS_I2C_CR_HOLD;
- else
- ctrl_reg = ctrl_reg & ~CDNS_I2C_CR_HOLD;
-
cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
/* Clear the interrupts in interrupt status register. */
diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
index e3a8640db7da..3c19aada4b30 100644
--- a/drivers/i2c/busses/i2c-designware-common.c
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -286,10 +286,8 @@ int i2c_dw_acpi_configure(struct device *device)
}
EXPORT_SYMBOL_GPL(i2c_dw_acpi_configure);
-void i2c_dw_acpi_adjust_bus_speed(struct device *device)
+static u32 i2c_dw_acpi_round_bus_speed(struct device *device)
{
- struct dw_i2c_dev *dev = dev_get_drvdata(device);
- struct i2c_timings *t = &dev->timings;
u32 acpi_speed;
int i;
@@ -300,9 +298,22 @@ void i2c_dw_acpi_adjust_bus_speed(struct device *device)
*/
for (i = 0; i < ARRAY_SIZE(supported_speeds); i++) {
if (acpi_speed >= supported_speeds[i])
- break;
+ return supported_speeds[i];
}
- acpi_speed = i < ARRAY_SIZE(supported_speeds) ? supported_speeds[i] : 0;
+
+ return 0;
+}
+
+#else /* CONFIG_ACPI */
+
+static inline u32 i2c_dw_acpi_round_bus_speed(struct device *device) { return 0; }
+
+#endif /* CONFIG_ACPI */
+
+void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev)
+{
+ u32 acpi_speed = i2c_dw_acpi_round_bus_speed(dev->dev);
+ struct i2c_timings *t = &dev->timings;
/*
* Find bus speed from the "clock-frequency" device property, ACPI
@@ -315,9 +326,7 @@ void i2c_dw_acpi_adjust_bus_speed(struct device *device)
else
t->bus_freq_hz = I2C_MAX_FAST_MODE_FREQ;
}
-EXPORT_SYMBOL_GPL(i2c_dw_acpi_adjust_bus_speed);
-
-#endif /* CONFIG_ACPI */
+EXPORT_SYMBOL_GPL(i2c_dw_adjust_bus_speed);
u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)
{
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index 556673a1f61b..eb5ef4d0f463 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -361,11 +361,10 @@ static inline int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev) { return 0;
#endif
int i2c_dw_validate_speed(struct dw_i2c_dev *dev);
+void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev);
#if IS_ENABLED(CONFIG_ACPI)
int i2c_dw_acpi_configure(struct device *device);
-void i2c_dw_acpi_adjust_bus_speed(struct device *device);
#else
static inline int i2c_dw_acpi_configure(struct device *device) { return -ENODEV; }
-static inline void i2c_dw_acpi_adjust_bus_speed(struct device *device) {}
#endif
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 947c096f86e3..8522134f9ea9 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -240,7 +240,7 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
}
}
- i2c_dw_acpi_adjust_bus_speed(&pdev->dev);
+ i2c_dw_adjust_bus_speed(dev);
if (has_acpi_companion(&pdev->dev))
i2c_dw_acpi_configure(&pdev->dev);
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 0de4e302fc6a..a71bc58fc03c 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -12,6 +12,7 @@
#include <linux/clk-provider.h>
#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/dmi.h>
#include <linux/err.h>
#include <linux/errno.h>
#include <linux/i2c.h>
@@ -191,6 +192,17 @@ static int dw_i2c_plat_request_regs(struct dw_i2c_dev *dev)
return ret;
}
+static const struct dmi_system_id dw_i2c_hwmon_class_dmi[] = {
+ {
+ .ident = "Qtechnology QT5222",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Qtechnology"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "QT5222"),
+ },
+ },
+ { } /* terminate list */
+};
+
static int dw_i2c_plat_probe(struct platform_device *pdev)
{
struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
@@ -228,7 +240,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
else
i2c_parse_fw_timings(&pdev->dev, t, false);
- i2c_dw_acpi_adjust_bus_speed(&pdev->dev);
+ i2c_dw_adjust_bus_speed(dev);
if (pdev->dev.of_node)
dw_i2c_of_configure(pdev);
@@ -267,7 +279,8 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
adap = &dev->adapter;
adap->owner = THIS_MODULE;
- adap->class = I2C_CLASS_DEPRECATED;
+ adap->class = dmi_check_system(dw_i2c_hwmon_class_dmi) ?
+ I2C_CLASS_HWMON : I2C_CLASS_DEPRECATED;
ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev));
adap->dev.of_node = pdev->dev.of_node;
adap->nr = -1;
diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c
index bb810dee8fb5..73f139690e4e 100644
--- a/drivers/i2c/busses/i2c-eg20t.c
+++ b/drivers/i2c/busses/i2c-eg20t.c
@@ -180,6 +180,7 @@ static const struct pci_device_id pch_pcidev_id[] = {
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7831_I2C), 1, },
{0,}
};
+MODULE_DEVICE_TABLE(pci, pch_pcidev_id);
static irqreturn_t pch_i2c_handler(int irq, void *pData);
diff --git a/drivers/i2c/busses/i2c-fsi.c b/drivers/i2c/busses/i2c-fsi.c
index e0c256922d4f..977d6f524649 100644
--- a/drivers/i2c/busses/i2c-fsi.c
+++ b/drivers/i2c/busses/i2c-fsi.c
@@ -98,7 +98,7 @@
#define I2C_STAT_DAT_REQ BIT(25)
#define I2C_STAT_CMD_COMP BIT(24)
#define I2C_STAT_STOP_ERR BIT(23)
-#define I2C_STAT_MAX_PORT GENMASK(19, 16)
+#define I2C_STAT_MAX_PORT GENMASK(22, 16)
#define I2C_STAT_ANY_INT BIT(15)
#define I2C_STAT_SCL_IN BIT(11)
#define I2C_STAT_SDA_IN BIT(10)
diff --git a/drivers/i2c/busses/i2c-mlxcpld.c b/drivers/i2c/busses/i2c-mlxcpld.c
index 2fd717d8dd30..71d7bae2cbca 100644
--- a/drivers/i2c/busses/i2c-mlxcpld.c
+++ b/drivers/i2c/busses/i2c-mlxcpld.c
@@ -337,9 +337,9 @@ static int mlxcpld_i2c_wait_for_tc(struct mlxcpld_i2c_priv *priv)
if (priv->smbus_block && (val & MLXCPLD_I2C_SMBUS_BLK_BIT)) {
mlxcpld_i2c_read_comm(priv, MLXCPLD_LPCI2C_NUM_DAT_REG,
&datalen, 1);
- if (unlikely(datalen > (I2C_SMBUS_BLOCK_MAX + 1))) {
+ if (unlikely(datalen > I2C_SMBUS_BLOCK_MAX)) {
dev_err(priv->dev, "Incorrect smbus block read message len\n");
- return -E2BIG;
+ return -EPROTO;
}
} else {
datalen = priv->xfer.data_len;
diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index 18d1e4fd4cf3..7f130829bf01 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -367,7 +367,6 @@ static int geni_i2c_rx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
geni_se_select_mode(se, GENI_SE_FIFO);
writel_relaxed(len, se->base + SE_I2C_RX_TRANS_LEN);
- geni_se_setup_m_cmd(se, I2C_READ, m_param);
if (dma_buf && geni_se_rx_dma_prep(se, dma_buf, len, &rx_dma)) {
geni_se_select_mode(se, GENI_SE_FIFO);
@@ -375,6 +374,8 @@ static int geni_i2c_rx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
dma_buf = NULL;
}
+ geni_se_setup_m_cmd(se, I2C_READ, m_param);
+
time_left = wait_for_completion_timeout(&gi2c->done, XFER_TIMEOUT);
if (!time_left)
geni_i2c_abort_xfer(gi2c);
@@ -408,7 +409,6 @@ static int geni_i2c_tx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
geni_se_select_mode(se, GENI_SE_FIFO);
writel_relaxed(len, se->base + SE_I2C_TX_TRANS_LEN);
- geni_se_setup_m_cmd(se, I2C_WRITE, m_param);
if (dma_buf && geni_se_tx_dma_prep(se, dma_buf, len, &tx_dma)) {
geni_se_select_mode(se, GENI_SE_FIFO);
@@ -416,6 +416,8 @@ static int geni_i2c_tx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
dma_buf = NULL;
}
+ geni_se_setup_m_cmd(se, I2C_WRITE, m_param);
+
if (!dma_buf) /* Get FIFO IRQ */
writel_relaxed(1, se->base + SE_GENI_TX_WATERMARK_REG);
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index a45c4bf1ec01..2e3e1bb75013 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -868,6 +868,7 @@ static int rcar_unreg_slave(struct i2c_client *slave)
/* disable irqs and ensure none is running before clearing ptr */
rcar_i2c_write(priv, ICSIER, 0);
rcar_i2c_write(priv, ICSCR, 0);
+ rcar_i2c_write(priv, ICSAR, 0); /* Gen2: must be 0 if not using slave */
synchronize_irq(priv->irq);
priv->slave = NULL;
@@ -969,6 +970,8 @@ static int rcar_i2c_probe(struct platform_device *pdev)
if (ret < 0)
goto out_pm_put;
+ rcar_i2c_write(priv, ICSAR, 0); /* Gen2: must be 0 if not using slave */
+
if (priv->devtype == I2C_RCAR_GEN3) {
priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
if (!IS_ERR(priv->rstc)) {
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index d1f278f73011..26f03a14a478 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -816,31 +816,6 @@ out_err_silent:
EXPORT_SYMBOL_GPL(i2c_new_client_device);
/**
- * i2c_new_device - instantiate an i2c device
- * @adap: the adapter managing the device
- * @info: describes one I2C device; bus_num is ignored
- * Context: can sleep
- *
- * This deprecated function has the same functionality as
- * @i2c_new_client_device, it just returns NULL instead of an ERR_PTR in case of
- * an error for compatibility with current I2C API. It will be removed once all
- * users are converted.
- *
- * This returns the new i2c client, which may be saved for later use with
- * i2c_unregister_device(); or NULL to indicate an error.
- */
-struct i2c_client *
-i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
-{
- struct i2c_client *ret;
-
- ret = i2c_new_client_device(adap, info);
- return IS_ERR(ret) ? NULL : ret;
-}
-EXPORT_SYMBOL_GPL(i2c_new_device);
-
-
-/**
* i2c_unregister_device - reverse effect of i2c_new_*_device()
* @client: value returned from i2c_new_*_device()
* Context: can sleep
diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c
index b34d2ff06931..f5c9787992e9 100644
--- a/drivers/i2c/i2c-core-smbus.c
+++ b/drivers/i2c/i2c-core-smbus.c
@@ -4,7 +4,7 @@
*
* This file contains the SMBus functions which are always included in the I2C
* core because they can be emulated via I2C. SMBus specific extensions
- * (e.g. smbalert) are handled in a seperate i2c-smbus module.
+ * (e.g. smbalert) are handled in a separate i2c-smbus module.
*
* All SMBus-related things are written by Frodo Looijaard <frodol@dds.nl>
* SMBus 2.0 support by Mark Studebaker <mdsxyz123@yahoo.com> and
@@ -495,6 +495,13 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr,
break;
case I2C_SMBUS_BLOCK_DATA:
case I2C_SMBUS_BLOCK_PROC_CALL:
+ if (msg[1].buf[0] > I2C_SMBUS_BLOCK_MAX) {
+ dev_err(&adapter->dev,
+ "Invalid block size returned: %d\n",
+ msg[1].buf[0]);
+ status = -EPROTO;
+ goto cleanup;
+ }
for (i = 0; i < msg[1].buf[0] + 1; i++)
data->block[i] = msg[1].buf[i];
break;
generated by cgit (git 2.34.1) at 2024-05-26 15:07:12 +0000