diff options
Diffstat (limited to 'drivers/iio/adc/ad7380.c')
| -rw-r--r-- | drivers/iio/adc/ad7380.c | 1344 |
1 files changed, 1344 insertions, 0 deletions
diff --git a/drivers/iio/adc/ad7380.c b/drivers/iio/adc/ad7380.c new file mode 100644 index 000000000000..4f32cb22f140 --- /dev/null +++ b/drivers/iio/adc/ad7380.c @@ -0,0 +1,1344 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Analog Devices AD738x Simultaneous Sampling SAR ADCs + * + * Copyright 2017 Analog Devices Inc. + * Copyright 2024 BayLibre, SAS + * + * Datasheets of supported parts: + * ad7380/1 : https://www.analog.com/media/en/technical-documentation/data-sheets/AD7380-7381.pdf + * ad7383/4 : https://www.analog.com/media/en/technical-documentation/data-sheets/ad7383-7384.pdf + * ad7386/7/8 : https://www.analog.com/media/en/technical-documentation/data-sheets/AD7386-7387-7388.pdf + * ad7380-4 : https://www.analog.com/media/en/technical-documentation/data-sheets/ad7380-4.pdf + * ad7381-4 : https://www.analog.com/media/en/technical-documentation/data-sheets/ad7381-4.pdf + * ad7383/4-4 : https://www.analog.com/media/en/technical-documentation/data-sheets/ad7383-4-ad7384-4.pdf + * ad7386/7/8-4 : https://www.analog.com/media/en/technical-documentation/data-sheets/ad7386-4-7387-4-7388-4.pdf + * adaq4370-4 : https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4370-4.pdf + * adaq4380-4 : https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4380-4.pdf + */ + +#include <linux/align.h> +#include <linux/bitfield.h> +#include <linux/bitops.h> +#include <linux/cleanup.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/math.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> +#include <linux/spi/spi.h> +#include <linux/units.h> +#include <linux/util_macros.h> + +#include <linux/iio/buffer.h> +#include <linux/iio/iio.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> + +#define MAX_NUM_CHANNELS 8 +/* 2.5V internal reference voltage */ +#define AD7380_INTERNAL_REF_MV 2500 +/* 3.3V internal reference voltage for ADAQ */ +#define ADAQ4380_INTERNAL_REF_MV 3300 + +/* reading and writing registers is more reliable at lower than max speed */ +#define AD7380_REG_WR_SPEED_HZ 10000000 + +#define AD7380_REG_WR BIT(15) +#define AD7380_REG_REGADDR GENMASK(14, 12) +#define AD7380_REG_DATA GENMASK(11, 0) + +#define AD7380_REG_ADDR_NOP 0x0 +#define AD7380_REG_ADDR_CONFIG1 0x1 +#define AD7380_REG_ADDR_CONFIG2 0x2 +#define AD7380_REG_ADDR_ALERT 0x3 +#define AD7380_REG_ADDR_ALERT_LOW_TH 0x4 +#define AD7380_REG_ADDR_ALERT_HIGH_TH 0x5 + +#define AD7380_CONFIG1_CH BIT(11) +#define AD7380_CONFIG1_SEQ BIT(10) +#define AD7380_CONFIG1_OS_MODE BIT(9) +#define AD7380_CONFIG1_OSR GENMASK(8, 6) +#define AD7380_CONFIG1_CRC_W BIT(5) +#define AD7380_CONFIG1_CRC_R BIT(4) +#define AD7380_CONFIG1_ALERTEN BIT(3) +#define AD7380_CONFIG1_RES BIT(2) +#define AD7380_CONFIG1_REFSEL BIT(1) +#define AD7380_CONFIG1_PMODE BIT(0) + +#define AD7380_CONFIG2_SDO2 GENMASK(9, 8) +#define AD7380_CONFIG2_SDO BIT(8) +#define AD7380_CONFIG2_RESET GENMASK(7, 0) + +#define AD7380_CONFIG2_RESET_SOFT 0x3C +#define AD7380_CONFIG2_RESET_HARD 0xFF + +#define AD7380_ALERT_LOW_TH GENMASK(11, 0) +#define AD7380_ALERT_HIGH_TH GENMASK(11, 0) + +#define T_CONVERT_NS 190 /* conversion time */ +#define T_CONVERT_0_NS 10 /* 1st conversion start time (oversampling) */ +#define T_CONVERT_X_NS 500 /* xth conversion start time (oversampling) */ +#define T_POWERUP_US 5000 /* Power up */ + +/* + * AD738x support several SDO lines to increase throughput, but driver currently + * supports only 1 SDO line (standard SPI transaction) + */ +#define AD7380_NUM_SDO_LINES 1 +#define AD7380_DEFAULT_GAIN_MILLI 1000 + +struct ad7380_timing_specs { + const unsigned int t_csh_ns; /* CS minimum high time */ +}; + +struct ad7380_chip_info { + const char *name; + const struct iio_chan_spec *channels; + unsigned int num_channels; + unsigned int num_simult_channels; + bool has_hardware_gain; + bool has_mux; + const char * const *supplies; + unsigned int num_supplies; + bool external_ref_only; + bool adaq_internal_ref_only; + const char * const *vcm_supplies; + unsigned int num_vcm_supplies; + const unsigned long *available_scan_masks; + const struct ad7380_timing_specs *timing_specs; +}; + +enum { + AD7380_SCAN_TYPE_NORMAL, + AD7380_SCAN_TYPE_RESOLUTION_BOOST, +}; + +/* Extended scan types for 12-bit unsigned chips. */ +static const struct iio_scan_type ad7380_scan_type_12_u[] = { + [AD7380_SCAN_TYPE_NORMAL] = { + .sign = 'u', + .realbits = 12, + .storagebits = 16, + .endianness = IIO_CPU, + }, + [AD7380_SCAN_TYPE_RESOLUTION_BOOST] = { + .sign = 'u', + .realbits = 14, + .storagebits = 16, + .endianness = IIO_CPU, + }, +}; + +/* Extended scan types for 14-bit signed chips. */ +static const struct iio_scan_type ad7380_scan_type_14_s[] = { + [AD7380_SCAN_TYPE_NORMAL] = { + .sign = 's', + .realbits = 14, + .storagebits = 16, + .endianness = IIO_CPU, + }, + [AD7380_SCAN_TYPE_RESOLUTION_BOOST] = { + .sign = 's', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_CPU, + }, +}; + +/* Extended scan types for 14-bit unsigned chips. */ +static const struct iio_scan_type ad7380_scan_type_14_u[] = { + [AD7380_SCAN_TYPE_NORMAL] = { + .sign = 'u', + .realbits = 14, + .storagebits = 16, + .endianness = IIO_CPU, + }, + [AD7380_SCAN_TYPE_RESOLUTION_BOOST] = { + .sign = 'u', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_CPU, + }, +}; + +/* Extended scan types for 16-bit signed_chips. */ +static const struct iio_scan_type ad7380_scan_type_16_s[] = { + [AD7380_SCAN_TYPE_NORMAL] = { + .sign = 's', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_CPU, + }, + [AD7380_SCAN_TYPE_RESOLUTION_BOOST] = { + .sign = 's', + .realbits = 18, + .storagebits = 32, + .endianness = IIO_CPU, + }, +}; + +/* Extended scan types for 16-bit unsigned chips. */ +static const struct iio_scan_type ad7380_scan_type_16_u[] = { + [AD7380_SCAN_TYPE_NORMAL] = { + .sign = 'u', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_CPU, + }, + [AD7380_SCAN_TYPE_RESOLUTION_BOOST] = { + .sign = 'u', + .realbits = 18, + .storagebits = 32, + .endianness = IIO_CPU, + }, +}; + +#define _AD7380_CHANNEL(index, bits, diff, sign, gain) { \ + .type = IIO_VOLTAGE, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + ((gain) ? BIT(IIO_CHAN_INFO_SCALE) : 0) | \ + ((diff) ? 0 : BIT(IIO_CHAN_INFO_OFFSET)), \ + .info_mask_shared_by_type = ((gain) ? 0 : BIT(IIO_CHAN_INFO_SCALE)) | \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ + .info_mask_shared_by_type_available = \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ + .indexed = 1, \ + .differential = (diff), \ + .channel = (diff) ? (2 * (index)) : (index), \ + .channel2 = (diff) ? (2 * (index) + 1) : 0, \ + .scan_index = (index), \ + .has_ext_scan_type = 1, \ + .ext_scan_type = ad7380_scan_type_##bits##_##sign, \ + .num_ext_scan_type = ARRAY_SIZE(ad7380_scan_type_##bits##_##sign), \ +} + +#define AD7380_CHANNEL(index, bits, diff, sign) \ + _AD7380_CHANNEL(index, bits, diff, sign, false) + +#define ADAQ4380_CHANNEL(index, bits, diff, sign) \ + _AD7380_CHANNEL(index, bits, diff, sign, true) + +#define DEFINE_AD7380_2_CHANNEL(name, bits, diff, sign) \ +static const struct iio_chan_spec name[] = { \ + AD7380_CHANNEL(0, bits, diff, sign), \ + AD7380_CHANNEL(1, bits, diff, sign), \ + IIO_CHAN_SOFT_TIMESTAMP(2), \ +} + +#define DEFINE_AD7380_4_CHANNEL(name, bits, diff, sign) \ +static const struct iio_chan_spec name[] = { \ + AD7380_CHANNEL(0, bits, diff, sign), \ + AD7380_CHANNEL(1, bits, diff, sign), \ + AD7380_CHANNEL(2, bits, diff, sign), \ + AD7380_CHANNEL(3, bits, diff, sign), \ + IIO_CHAN_SOFT_TIMESTAMP(4), \ +} + +#define DEFINE_ADAQ4380_4_CHANNEL(name, bits, diff, sign) \ +static const struct iio_chan_spec name[] = { \ + ADAQ4380_CHANNEL(0, bits, diff, sign), \ + ADAQ4380_CHANNEL(1, bits, diff, sign), \ + ADAQ4380_CHANNEL(2, bits, diff, sign), \ + ADAQ4380_CHANNEL(3, bits, diff, sign), \ + IIO_CHAN_SOFT_TIMESTAMP(4), \ +} + +#define DEFINE_AD7380_8_CHANNEL(name, bits, diff, sign) \ +static const struct iio_chan_spec name[] = { \ + AD7380_CHANNEL(0, bits, diff, sign), \ + AD7380_CHANNEL(1, bits, diff, sign), \ + AD7380_CHANNEL(2, bits, diff, sign), \ + AD7380_CHANNEL(3, bits, diff, sign), \ + AD7380_CHANNEL(4, bits, diff, sign), \ + AD7380_CHANNEL(5, bits, diff, sign), \ + AD7380_CHANNEL(6, bits, diff, sign), \ + AD7380_CHANNEL(7, bits, diff, sign), \ + IIO_CHAN_SOFT_TIMESTAMP(8), \ +} + +/* fully differential */ +DEFINE_AD7380_2_CHANNEL(ad7380_channels, 16, 1, s); +DEFINE_AD7380_2_CHANNEL(ad7381_channels, 14, 1, s); +DEFINE_AD7380_4_CHANNEL(ad7380_4_channels, 16, 1, s); +DEFINE_AD7380_4_CHANNEL(ad7381_4_channels, 14, 1, s); +DEFINE_ADAQ4380_4_CHANNEL(adaq4380_4_channels, 16, 1, s); +/* pseudo differential */ +DEFINE_AD7380_2_CHANNEL(ad7383_channels, 16, 0, s); +DEFINE_AD7380_2_CHANNEL(ad7384_channels, 14, 0, s); +DEFINE_AD7380_4_CHANNEL(ad7383_4_channels, 16, 0, s); +DEFINE_AD7380_4_CHANNEL(ad7384_4_channels, 14, 0, s); + +/* Single ended */ +DEFINE_AD7380_4_CHANNEL(ad7386_channels, 16, 0, u); +DEFINE_AD7380_4_CHANNEL(ad7387_channels, 14, 0, u); +DEFINE_AD7380_4_CHANNEL(ad7388_channels, 12, 0, u); +DEFINE_AD7380_8_CHANNEL(ad7386_4_channels, 16, 0, u); +DEFINE_AD7380_8_CHANNEL(ad7387_4_channels, 14, 0, u); +DEFINE_AD7380_8_CHANNEL(ad7388_4_channels, 12, 0, u); + +static const char * const ad7380_supplies[] = { + "vcc", "vlogic", +}; + +static const char * const adaq4380_supplies[] = { + "ldo", "vcc", "vlogic", "vs-p", "vs-n", "refin", +}; + +static const char * const ad7380_2_channel_vcm_supplies[] = { + "aina", "ainb", +}; + +static const char * const ad7380_4_channel_vcm_supplies[] = { + "aina", "ainb", "ainc", "aind", +}; + +/* Since this is simultaneous sampling, we don't allow individual channels. */ +static const unsigned long ad7380_2_channel_scan_masks[] = { + GENMASK(1, 0), + 0 +}; + +static const unsigned long ad7380_4_channel_scan_masks[] = { + GENMASK(3, 0), + 0 +}; + +/* + * Single ended parts have a 2:1 multiplexer in front of each ADC. + * + * From an IIO point of view, all inputs are exported, i.e ad7386/7/8 + * export 4 channels and ad7386-4/7-4/8-4 export 8 channels. + * + * Inputs AinX0 of multiplexers correspond to the first half of IIO channels + * (i.e 0-1 or 0-3) and inputs AinX1 correspond to second half (i.e 2-3 or + * 4-7). Example for AD7386/7/8 (2 channels parts): + * + * IIO | AD7386/7/8 + * | +---------------------------- + * | | _____ ______ + * | | | | | | + * voltage0 | AinA0 --|--->| | | | + * | | | mux |----->| ADCA |--- + * voltage2 | AinA1 --|--->| | | | + * | | |_____| |_____ | + * | | _____ ______ + * | | | | | | + * voltage1 | AinB0 --|--->| | | | + * | | | mux |----->| ADCB |--- + * voltage3 | AinB1 --|--->| | | | + * | | |_____| |______| + * | | + * | +---------------------------- + * + * Since this is simultaneous sampling for AinX0 OR AinX1 we have two separate + * scan masks. + * When sequencer mode is enabled, chip automatically cycles through + * AinX0 and AinX1 channels. From an IIO point of view, we ca enable all + * channels, at the cost of an extra read, thus dividing the maximum rate by + * two. + */ +enum { + AD7380_SCAN_MASK_CH_0, + AD7380_SCAN_MASK_CH_1, + AD7380_SCAN_MASK_SEQ, +}; + +static const unsigned long ad7380_2x2_channel_scan_masks[] = { + [AD7380_SCAN_MASK_CH_0] = GENMASK(1, 0), + [AD7380_SCAN_MASK_CH_1] = GENMASK(3, 2), + [AD7380_SCAN_MASK_SEQ] = GENMASK(3, 0), + 0 +}; + +static const unsigned long ad7380_2x4_channel_scan_masks[] = { + [AD7380_SCAN_MASK_CH_0] = GENMASK(3, 0), + [AD7380_SCAN_MASK_CH_1] = GENMASK(7, 4), + [AD7380_SCAN_MASK_SEQ] = GENMASK(7, 0), + 0 +}; + +static const struct ad7380_timing_specs ad7380_timing = { + .t_csh_ns = 10, +}; + +static const struct ad7380_timing_specs ad7380_4_timing = { + .t_csh_ns = 20, +}; + +/* + * Available oversampling ratios. The indices correspond with the bit value + * expected by the chip. The available ratios depend on the averaging mode, + * only normal averaging is supported for now. + */ +static const int ad7380_oversampling_ratios[] = { + 1, 2, 4, 8, 16, 32, +}; + +/* Gains stored as fractions of 1000 so they can be expressed by integers. */ +static const int ad7380_gains[] = { + 300, 600, 1000, 1600, +}; + +static const struct ad7380_chip_info ad7380_chip_info = { + .name = "ad7380", + .channels = ad7380_channels, + .num_channels = ARRAY_SIZE(ad7380_channels), + .num_simult_channels = 2, + .supplies = ad7380_supplies, + .num_supplies = ARRAY_SIZE(ad7380_supplies), + .available_scan_masks = ad7380_2_channel_scan_masks, + .timing_specs = &ad7380_timing, +}; + +static const struct ad7380_chip_info ad7381_chip_info = { + .name = "ad7381", + .channels = ad7381_channels, + .num_channels = ARRAY_SIZE(ad7381_channels), + .num_simult_channels = 2, + .supplies = ad7380_supplies, + .num_supplies = ARRAY_SIZE(ad7380_supplies), + .available_scan_masks = ad7380_2_channel_scan_masks, + .timing_specs = &ad7380_timing, +}; + +static const struct ad7380_chip_info ad7383_chip_info = { + .name = "ad7383", + .channels = ad7383_channels, + .num_channels = ARRAY_SIZE(ad7383_channels), + .num_simult_channels = 2, + .supplies = ad7380_supplies, + .num_supplies = ARRAY_SIZE(ad7380_supplies), + .vcm_supplies = ad7380_2_channel_vcm_supplies, + .num_vcm_supplies = ARRAY_SIZE(ad7380_2_channel_vcm_supplies), + .available_scan_masks = ad7380_2_channel_scan_masks, + .timing_specs = &ad7380_timing, +}; + +static const struct ad7380_chip_info ad7384_chip_info = { + .name = "ad7384", + .channels = ad7384_channels, + .num_channels = ARRAY_SIZE(ad7384_channels), + .num_simult_channels = 2, + .supplies = ad7380_supplies, + .num_supplies = ARRAY_SIZE(ad7380_supplies), + .vcm_supplies = ad7380_2_channel_vcm_supplies, + .num_vcm_supplies = ARRAY_SIZE(ad7380_2_channel_vcm_supplies), + .available_scan_masks = ad7380_2_channel_scan_masks, + .timing_specs = &ad7380_timing, +}; + +static const struct ad7380_chip_info ad7386_chip_info = { + .name = "ad7386", + .channels = ad7386_channels, + .num_channels = ARRAY_SIZE(ad7386_channels), + .num_simult_channels = 2, + .supplies = ad7380_supplies, + .num_supplies = ARRAY_SIZE(ad7380_supplies), + .has_mux = true, + .available_scan_masks = ad7380_2x2_channel_scan_masks, + .timing_specs = &ad7380_timing, +}; + +static const struct ad7380_chip_info ad7387_chip_info = { + .name = "ad7387", + .channels = ad7387_channels, + .num_channels = ARRAY_SIZE(ad7387_channels), + .num_simult_channels = 2, + .supplies = ad7380_supplies, + .num_supplies = ARRAY_SIZE(ad7380_supplies), + .has_mux = true, + .available_scan_masks = ad7380_2x2_channel_scan_masks, + .timing_specs = &ad7380_timing, +}; + +static const struct ad7380_chip_info ad7388_chip_info = { + .name = "ad7388", + .channels = ad7388_channels, + .num_channels = ARRAY_SIZE(ad7388_channels), + .num_simult_channels = 2, + .supplies = ad7380_supplies, + .num_supplies = ARRAY_SIZE(ad7380_supplies), + .has_mux = true, + .available_scan_masks = ad7380_2x2_channel_scan_masks, + .timing_specs = &ad7380_timing, +}; + +static const struct ad7380_chip_info ad7380_4_chip_info = { + .name = "ad7380-4", + .channels = ad7380_4_channels, + .num_channels = ARRAY_SIZE(ad7380_4_channels), + .num_simult_channels = 4, + .supplies = ad7380_supplies, + .num_supplies = ARRAY_SIZE(ad7380_supplies), + .external_ref_only = true, + .available_scan_masks = ad7380_4_channel_scan_masks, + .timing_specs = &ad7380_4_timing, +}; + +static const struct ad7380_chip_info ad7381_4_chip_info = { + .name = "ad7381-4", + .channels = ad7381_4_channels, + .num_channels = ARRAY_SIZE(ad7381_4_channels), + .num_simult_channels = 4, + .supplies = ad7380_supplies, + .num_supplies = ARRAY_SIZE(ad7380_supplies), + .available_scan_masks = ad7380_4_channel_scan_masks, + .timing_specs = &ad7380_4_timing, +}; + +static const struct ad7380_chip_info ad7383_4_chip_info = { + .name = "ad7383-4", + .channels = ad7383_4_channels, + .num_channels = ARRAY_SIZE(ad7383_4_channels), + .num_simult_channels = 4, + .supplies = ad7380_supplies, + .num_supplies = ARRAY_SIZE(ad7380_supplies), + .vcm_supplies = ad7380_4_channel_vcm_supplies, + .num_vcm_supplies = ARRAY_SIZE(ad7380_4_channel_vcm_supplies), + .available_scan_masks = ad7380_4_channel_scan_masks, + .timing_specs = &ad7380_4_timing, +}; + +static const struct ad7380_chip_info ad7384_4_chip_info = { + .name = "ad7384-4", + .channels = ad7384_4_channels, + .num_channels = ARRAY_SIZE(ad7384_4_channels), + .num_simult_channels = 4, + .supplies = ad7380_supplies, + .num_supplies = ARRAY_SIZE(ad7380_supplies), + .vcm_supplies = ad7380_4_channel_vcm_supplies, + .num_vcm_supplies = ARRAY_SIZE(ad7380_4_channel_vcm_supplies), + .available_scan_masks = ad7380_4_channel_scan_masks, + .timing_specs = &ad7380_4_timing, +}; + +static const struct ad7380_chip_info ad7386_4_chip_info = { + .name = "ad7386-4", + .channels = ad7386_4_channels, + .num_channels = ARRAY_SIZE(ad7386_4_channels), + .num_simult_channels = 4, + .supplies = ad7380_supplies, + .num_supplies = ARRAY_SIZE(ad7380_supplies), + .has_mux = true, + .available_scan_masks = ad7380_2x4_channel_scan_masks, + .timing_specs = &ad7380_4_timing, +}; + +static const struct ad7380_chip_info ad7387_4_chip_info = { + .name = "ad7387-4", + .channels = ad7387_4_channels, + .num_channels = ARRAY_SIZE(ad7387_4_channels), + .num_simult_channels = 4, + .supplies = ad7380_supplies, + .num_supplies = ARRAY_SIZE(ad7380_supplies), + .has_mux = true, + .available_scan_masks = ad7380_2x4_channel_scan_masks, + .timing_specs = &ad7380_4_timing, +}; + +static const struct ad7380_chip_info ad7388_4_chip_info = { + .name = "ad7388-4", + .channels = ad7388_4_channels, + .num_channels = ARRAY_SIZE(ad7388_4_channels), + .num_simult_channels = 4, + .supplies = ad7380_supplies, + .num_supplies = ARRAY_SIZE(ad7380_supplies), + .has_mux = true, + .available_scan_masks = ad7380_2x4_channel_scan_masks, + .timing_specs = &ad7380_4_timing, +}; + +static const struct ad7380_chip_info adaq4370_4_chip_info = { + .name = "adaq4370-4", + .channels = adaq4380_4_channels, + .num_channels = ARRAY_SIZE(adaq4380_4_channels), + .num_simult_channels = 4, + .supplies = adaq4380_supplies, + .num_supplies = ARRAY_SIZE(adaq4380_supplies), + .adaq_internal_ref_only = true, + .has_hardware_gain = true, + .available_scan_masks = ad7380_4_channel_scan_masks, + .timing_specs = &ad7380_4_timing, +}; + +static const struct ad7380_chip_info adaq4380_4_chip_info = { + .name = "adaq4380-4", + .channels = adaq4380_4_channels, + .num_channels = ARRAY_SIZE(adaq4380_4_channels), + .num_simult_channels = 4, + .supplies = adaq4380_supplies, + .num_supplies = ARRAY_SIZE(adaq4380_supplies), + .adaq_internal_ref_only = true, + .has_hardware_gain = true, + .available_scan_masks = ad7380_4_channel_scan_masks, + .timing_specs = &ad7380_4_timing, +}; + +struct ad7380_state { + const struct ad7380_chip_info *chip_info; + struct spi_device *spi; + struct regmap *regmap; + unsigned int oversampling_ratio; + bool resolution_boost_enabled; + unsigned int ch; + bool seq; + unsigned int vref_mv; + unsigned int vcm_mv[MAX_NUM_CHANNELS]; + unsigned int gain_milli[MAX_NUM_CHANNELS]; + /* xfers, message an buffer for reading sample data */ + struct spi_transfer normal_xfer[2]; + struct spi_message normal_msg; + struct spi_transfer seq_xfer[4]; + struct spi_message seq_msg; + /* + * DMA (thus cache coherency maintenance) requires the transfer buffers + * to live in their own cache lines. + * + * Make the buffer large enough for MAX_NUM_CHANNELS 32-bit samples and + * one 64-bit aligned 64-bit timestamp. + */ + u8 scan_data[ALIGN(MAX_NUM_CHANNELS * sizeof(u32), sizeof(s64)) + + sizeof(s64)] __aligned(IIO_DMA_MINALIGN); + /* buffers for reading/writing registers */ + u16 tx; + u16 rx; +}; + +static int ad7380_regmap_reg_write(void *context, unsigned int reg, + unsigned int val) +{ + struct ad7380_state *st = context; + struct spi_transfer xfer = { + .speed_hz = AD7380_REG_WR_SPEED_HZ, + .bits_per_word = 16, + .len = 2, + .tx_buf = &st->tx, + }; + + st->tx = FIELD_PREP(AD7380_REG_WR, 1) | + FIELD_PREP(AD7380_REG_REGADDR, reg) | + FIELD_PREP(AD7380_REG_DATA, val); + + return spi_sync_transfer(st->spi, &xfer, 1); +} + +static int ad7380_regmap_reg_read(void *context, unsigned int reg, + unsigned int *val) +{ + struct ad7380_state *st = context; + struct spi_transfer xfers[] = { + { + .speed_hz = AD7380_REG_WR_SPEED_HZ, + .bits_per_word = 16, + .len = 2, + .tx_buf = &st->tx, + .cs_change = 1, + .cs_change_delay = { + .value = st->chip_info->timing_specs->t_csh_ns, + .unit = SPI_DELAY_UNIT_NSECS, + }, + }, { + .speed_hz = AD7380_REG_WR_SPEED_HZ, + .bits_per_word = 16, + .len = 2, + .rx_buf = &st->rx, + }, + }; + int ret; + + st->tx = FIELD_PREP(AD7380_REG_WR, 0) | + FIELD_PREP(AD7380_REG_REGADDR, reg) | + FIELD_PREP(AD7380_REG_DATA, 0); + + ret = spi_sync_transfer(st->spi, xfers, ARRAY_SIZE(xfers)); + if (ret < 0) + return ret; + + *val = FIELD_GET(AD7380_REG_DATA, st->rx); + + return 0; +} + +static const struct regmap_config ad7380_regmap_config = { + .reg_bits = 3, + .val_bits = 12, + .reg_read = ad7380_regmap_reg_read, + .reg_write = ad7380_regmap_reg_write, + .max_register = AD7380_REG_ADDR_ALERT_HIGH_TH, + .can_sleep = true, +}; + +static int ad7380_debugfs_reg_access(struct iio_dev *indio_dev, u32 reg, + u32 writeval, u32 *readval) +{ + iio_device_claim_direct_scoped(return -EBUSY, indio_dev) { + struct ad7380_state *st = iio_priv(indio_dev); + + if (readval) + return regmap_read(st->regmap, reg, readval); + else + return regmap_write(st->regmap, reg, writeval); + } + unreachable(); +} + +/* + * When switching channel, the ADC require an additional settling time. + * According to the datasheet, data is value on the third CS low. We already + * have an extra toggle before each read (either direct reads or buffered reads) + * to sample correct data, so we just add a single CS toggle at the end of the + * register write. + */ +static int ad7380_set_ch(struct ad7380_state *st, unsigned int ch) +{ + struct spi_transfer xfer = { + .delay = { + .value = T_CONVERT_NS, + .unit = SPI_DELAY_UNIT_NSECS, + } + }; + int ret; + + if (st->ch == ch) + return 0; + + ret = regmap_update_bits(st->regmap, + AD7380_REG_ADDR_CONFIG1, + AD7380_CONFIG1_CH, + FIELD_PREP(AD7380_CONFIG1_CH, ch)); + + if (ret) + return ret; + + st->ch = ch; + + if (st->oversampling_ratio > 1) + xfer.delay.value = T_CONVERT_0_NS + + T_CONVERT_X_NS * (st->oversampling_ratio - 1) * + st->chip_info->num_simult_channels / AD7380_NUM_SDO_LINES; + + return spi_sync_transfer(st->spi, &xfer, 1); +} + +/** + * ad7380_update_xfers - update the SPI transfers base on the current scan type + * @st: device instance specific state + * @scan_type: current scan type + */ +static void ad7380_update_xfers(struct ad7380_state *st, + const struct iio_scan_type *scan_type) +{ + struct spi_transfer *xfer = st->seq ? st->seq_xfer : st->normal_xfer; + unsigned int t_convert = T_CONVERT_NS; + + /* + * In the case of oversampling, conversion time is higher than in normal + * mode. Technically T_CONVERT_X_NS is lower for some chips, but we use + * the maximum value for simplicity for now. + */ + if (st->oversampling_ratio > 1) + t_convert = T_CONVERT_0_NS + T_CONVERT_X_NS * + (st->oversampling_ratio - 1) * + st->chip_info->num_simult_channels / AD7380_NUM_SDO_LINES; + + if (st->seq) { + xfer[0].delay.value = xfer[1].delay.value = t_convert; + xfer[0].delay.unit = xfer[1].delay.unit = SPI_DELAY_UNIT_NSECS; + xfer[2].bits_per_word = xfer[3].bits_per_word = + scan_type->realbits; + xfer[2].len = xfer[3].len = + BITS_TO_BYTES(scan_type->storagebits) * + st->chip_info->num_simult_channels; + xfer[3].rx_buf = xfer[2].rx_buf + xfer[2].len; + /* Additional delay required here when oversampling is enabled */ + if (st->oversampling_ratio > 1) + xfer[2].delay.value = t_convert; + else + xfer[2].delay.value = 0; + xfer[2].delay.unit = SPI_DELAY_UNIT_NSECS; + } else { + xfer[0].delay.value = t_convert; + xfer[0].delay.unit = SPI_DELAY_UNIT_NSECS; + xfer[1].bits_per_word = scan_type->realbits; + xfer[1].len = BITS_TO_BYTES(scan_type->storagebits) * + st->chip_info->num_simult_channels; + } +} + +static int ad7380_triggered_buffer_preenable(struct iio_dev *indio_dev) +{ + struct ad7380_state *st = iio_priv(indio_dev); + const struct iio_scan_type *scan_type; + struct spi_message *msg = &st->normal_msg; + + /* + * Currently, we always read all channels at the same time. The scan_type + * is the same for all channels, so we just pass the first channel. + */ + scan_type = iio_get_current_scan_type(indio_dev, &indio_dev->channels[0]); + if (IS_ERR(scan_type)) + return PTR_ERR(scan_type); + + if (st->chip_info->has_mux) { + unsigned int index; + int ret; + + /* + * Depending on the requested scan_mask and current state, + * we need to either change CH bit, or enable sequencer mode + * to sample correct data. + * Sequencer mode is enabled if active mask corresponds to all + * IIO channels enabled. Otherwise, CH bit is set. + */ + ret = iio_active_scan_mask_index(indio_dev); + if (ret < 0) + return ret; + + index = ret; + if (index == AD7380_SCAN_MASK_SEQ) { + ret = regmap_update_bits(st->regmap, + AD7380_REG_ADDR_CONFIG1, + AD7380_CONFIG1_SEQ, + FIELD_PREP(AD7380_CONFIG1_SEQ, 1)); + if (ret) + return ret; + msg = &st->seq_msg; + st->seq = true; + } else { + ret = ad7380_set_ch(st, index); + if (ret) + return ret; + } + + } + + ad7380_update_xfers(st, scan_type); + + return spi_optimize_message(st->spi, msg); +} + +static int ad7380_triggered_buffer_postdisable(struct iio_dev *indio_dev) +{ + struct ad7380_state *st = iio_priv(indio_dev); + struct spi_message *msg = &st->normal_msg; + int ret; + + if (st->seq) { + ret = regmap_update_bits(st->regmap, + AD7380_REG_ADDR_CONFIG1, + AD7380_CONFIG1_SEQ, + FIELD_PREP(AD7380_CONFIG1_SEQ, 0)); + if (ret) + return ret; + + msg = &st->seq_msg; + st->seq = false; + } + + spi_unoptimize_message(msg); + + return 0; +} + +static const struct iio_buffer_setup_ops ad7380_buffer_setup_ops = { + .preenable = ad7380_triggered_buffer_preenable, + .postdisable = ad7380_triggered_buffer_postdisable, +}; + +static irqreturn_t ad7380_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct ad7380_state *st = iio_priv(indio_dev); + struct spi_message *msg = st->seq ? &st->seq_msg : &st->normal_msg; + int ret; + + ret = spi_sync(st->spi, msg); + if (ret) + goto out; + + iio_push_to_buffers_with_timestamp(indio_dev, &st->scan_data, + pf->timestamp); + +out: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static int ad7380_read_direct(struct ad7380_state *st, unsigned int scan_index, + const struct iio_scan_type *scan_type, int *val) +{ + unsigned int index = scan_index; + int ret; + + if (st->chip_info->has_mux) { + unsigned int ch = 0; + + if (index >= st->chip_info->num_simult_channels) { + index -= st->chip_info->num_simult_channels; + ch = 1; + } + + ret = ad7380_set_ch(st, ch); + if (ret) + return ret; + } + + ad7380_update_xfers(st, scan_type); + + ret = spi_sync(st->spi, &st->normal_msg); + if (ret < 0) + return ret; + + if (scan_type->storagebits > 16) { + if (scan_type->sign == 's') + *val = sign_extend32(*(u32 *)(st->scan_data + 4 * index), + scan_type->realbits - 1); + else + *val = *(u32 *)(st->scan_data + 4 * index) & + GENMASK(scan_type->realbits - 1, 0); + } else { + if (scan_type->sign == 's') + *val = sign_extend32(*(u16 *)(st->scan_data + 2 * index), + scan_type->realbits - 1); + else + *val = *(u16 *)(st->scan_data + 2 * index) & + GENMASK(scan_type->realbits - 1, 0); + } + + return IIO_VAL_INT; +} + +static int ad7380_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long info) +{ + struct ad7380_state *st = iio_priv(indio_dev); + const struct iio_scan_type *scan_type; + + scan_type = iio_get_current_scan_type(indio_dev, chan); + + if (IS_ERR(scan_type)) + return PTR_ERR(scan_type); + + switch (info) { + case IIO_CHAN_INFO_RAW: + iio_device_claim_direct_scoped(return -EBUSY, indio_dev) { + return ad7380_read_direct(st, chan->scan_index, + scan_type, val); + } + unreachable(); + case IIO_CHAN_INFO_SCALE: + /* + * According to the datasheet, the LSB size is: + * * (2 × VREF) / 2^N, for differential chips + * * VREF / 2^N, for pseudo-differential chips + * where N is the ADC resolution (i.e realbits) + * + * The gain is stored as a fraction of 1000 and, as we need to + * divide vref_mv by the gain, we invert the gain/1000 fraction. + */ + if (st->chip_info->has_hardware_gain) + *val = mult_frac(st->vref_mv, MILLI, + st->gain_milli[chan->scan_index]); + else + *val = st->vref_mv; + *val2 = scan_type->realbits - chan->differential; + + return IIO_VAL_FRACTIONAL_LOG2; + case IIO_CHAN_INFO_OFFSET: + /* + * According to IIO ABI, offset is applied before scale, + * so offset is: vcm_mv / scale + */ + *val = st->vcm_mv[chan->channel] * (1 << scan_type->realbits) + / st->vref_mv; + + return IIO_VAL_INT; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + *val = st->oversampling_ratio; + + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static int ad7380_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + *vals = ad7380_oversampling_ratios; + *length = ARRAY_SIZE(ad7380_oversampling_ratios); + *type = IIO_VAL_INT; + + return IIO_AVAIL_LIST; + default: + return -EINVAL; + } +} + +/** + * ad7380_osr_to_regval - convert ratio to OSR register value + * @ratio: ratio to check + * + * Check if ratio is present in the list of available ratios and return the + * corresponding value that needs to be written to the register to select that + * ratio. + * + * Returns: register value (0 to 7) or -EINVAL if there is not an exact match + */ +static int ad7380_osr_to_regval(int ratio) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ad7380_oversampling_ratios); i++) { + if (ratio == ad7380_oversampling_ratios[i]) + return i; + } + + return -EINVAL; +} + +static int ad7380_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, + int val2, long mask) +{ + struct ad7380_state *st = iio_priv(indio_dev); + int ret, osr, boost; + + switch (mask) { + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + osr = ad7380_osr_to_regval(val); + if (osr < 0) + return osr; + + /* always enable resolution boost when oversampling is enabled */ + boost = osr > 0 ? 1 : 0; + + iio_device_claim_direct_scoped(return -EBUSY, indio_dev) { + ret = regmap_update_bits(st->regmap, + AD7380_REG_ADDR_CONFIG1, + AD7380_CONFIG1_OSR | AD7380_CONFIG1_RES, + FIELD_PREP(AD7380_CONFIG1_OSR, osr) | + FIELD_PREP(AD7380_CONFIG1_RES, boost)); + + if (ret) + return ret; + + st->oversampling_ratio = val; + st->resolution_boost_enabled = boost; + + /* + * Perform a soft reset. This will flush the oversampling + * block and FIFO but will maintain the content of the + * configurable registers. + */ + return regmap_update_bits(st->regmap, + AD7380_REG_ADDR_CONFIG2, + AD7380_CONFIG2_RESET, + FIELD_PREP(AD7380_CONFIG2_RESET, + AD7380_CONFIG2_RESET_SOFT)); + } + unreachable(); + default: + return -EINVAL; + } +} + +static int ad7380_get_current_scan_type(const struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + struct ad7380_state *st = iio_priv(indio_dev); + + return st->resolution_boost_enabled ? AD7380_SCAN_TYPE_RESOLUTION_BOOST + : AD7380_SCAN_TYPE_NORMAL; +} + +static const struct iio_info ad7380_info = { + .read_raw = &ad7380_read_raw, + .read_avail = &ad7380_read_avail, + .write_raw = &ad7380_write_raw, + .get_current_scan_type = &ad7380_get_current_scan_type, + .debugfs_reg_access = &ad7380_debugfs_reg_access, +}; + +static int ad7380_init(struct ad7380_state *st, bool external_ref_en) +{ + int ret; + + /* perform hard reset */ + ret = regmap_update_bits(st->regmap, AD7380_REG_ADDR_CONFIG2, + AD7380_CONFIG2_RESET, + FIELD_PREP(AD7380_CONFIG2_RESET, + AD7380_CONFIG2_RESET_HARD)); + if (ret < 0) + return ret; + + if (external_ref_en) { + /* select external reference voltage */ + ret = regmap_set_bits(st->regmap, AD7380_REG_ADDR_CONFIG1, + AD7380_CONFIG1_REFSEL); + if (ret < 0) + return ret; + } + + /* This is the default value after reset. */ + st->oversampling_ratio = 1; + st->ch = 0; + st->seq = false; + + /* SPI 1-wire mode */ + return regmap_update_bits(st->regmap, AD7380_REG_ADDR_CONFIG2, + AD7380_CONFIG2_SDO, + FIELD_PREP(AD7380_CONFIG2_SDO, + AD7380_NUM_SDO_LINES)); +} + +static int ad7380_probe(struct spi_device *spi) +{ + struct device *dev = &spi->dev; + struct iio_dev *indio_dev; + struct ad7380_state *st; + bool external_ref_en; + int ret, i; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + + st = iio_priv(indio_dev); + st->spi = spi; + st->chip_info = spi_get_device_match_data(spi); + if (!st->chip_info) + return dev_err_probe(dev, -EINVAL, "missing match data\n"); + + ret = devm_regulator_bulk_get_enable(dev, st->chip_info->num_supplies, + st->chip_info->supplies); + + if (ret) + return dev_err_probe(dev, ret, + "Failed to enable power supplies\n"); + fsleep(T_POWERUP_US); + + if (st->chip_info->adaq_internal_ref_only) { + /* + * ADAQ chips use fixed internal reference but still + * require a specific reference supply to power it. + * "refin" is already enabled with other power supplies + * in bulk_get_enable(). + */ + + st->vref_mv = ADAQ4380_INTERNAL_REF_MV; + + /* these chips don't have a register bit for this */ + external_ref_en = false; + } else if (st->chip_info->external_ref_only) { + ret = devm_regulator_get_enable_read_voltage(dev, "refin"); + if (ret < 0) + return dev_err_probe(dev, ret, + "Failed to get refin regulator\n"); + + st->vref_mv = ret / 1000; + + /* these chips don't have a register bit for this */ + external_ref_en = false; + } else { + /* + * If there is no REFIO supply, then it means that we are using + * the internal reference, otherwise REFIO is reference voltage. + */ + ret = devm_regulator_get_enable_read_voltage(dev, "refio"); + if (ret < 0 && ret != -ENODEV) + return dev_err_probe(dev, ret, + "Failed to get refio regulator\n"); + + external_ref_en = ret != -ENODEV; + st->vref_mv = external_ref_en ? ret / 1000 : AD7380_INTERNAL_REF_MV; + } + + if (st->chip_info->num_vcm_supplies > ARRAY_SIZE(st->vcm_mv)) + return dev_err_probe(dev, -EINVAL, + "invalid number of VCM supplies\n"); + + /* + * pseudo-differential chips have common mode supplies for the negative + * input pin. + */ + for (i = 0; i < st->chip_info->num_vcm_supplies; i++) { + const char *vcm = st->chip_info->vcm_supplies[i]; + + ret = devm_regulator_get_enable_read_voltage(dev, vcm); + if (ret < 0) + return dev_err_probe(dev, ret, + "Failed to get %s regulator\n", + vcm); + + st->vcm_mv[i] = ret / 1000; + } + + for (i = 0; i < MAX_NUM_CHANNELS; i++) + st->gain_milli[i] = AD7380_DEFAULT_GAIN_MILLI; + + if (st->chip_info->has_hardware_gain) { + device_for_each_child_node_scoped(dev, node) { + unsigned int channel, gain; + int gain_idx; + + ret = fwnode_property_read_u32(node, "reg", &channel); + if (ret) + return dev_err_probe(dev, ret, + "Failed to read reg property\n"); + + if (channel >= st->chip_info->num_channels - 1) + return dev_err_probe(dev, -EINVAL, + "Invalid channel number %i\n", + channel); + + ret = fwnode_property_read_u32(node, "adi,gain-milli", + &gain); + if (ret && ret != -EINVAL) + return dev_err_probe(dev, ret, + "Failed to read gain for channel %i\n", + channel); + if (ret != -EINVAL) { + /* + * Match gain value from dt to one of supported + * gains + */ + gain_idx = find_closest(gain, ad7380_gains, + ARRAY_SIZE(ad7380_gains)); + st->gain_milli[channel] = ad7380_gains[gain_idx]; + } + } + } + + st->regmap = devm_regmap_init(dev, NULL, st, &ad7380_regmap_config); + if (IS_ERR(st->regmap)) + return dev_err_probe(dev, PTR_ERR(st->regmap), + "failed to allocate register map\n"); + + /* + * Setting up xfer structures for both normal and sequence mode. These + * struct are used for both direct read and triggered buffer. Additional + * fields will be set up in ad7380_update_xfers() based on the current + * state of the driver at the time of the read. + */ + + /* + * In normal mode a read is composed of two steps: + * - first, toggle CS (no data xfer) to trigger a conversion + * - then, read data + */ + st->normal_xfer[0].cs_change = 1; + st->normal_xfer[0].cs_change_delay.value = st->chip_info->timing_specs->t_csh_ns; + st->normal_xfer[0].cs_change_delay.unit = SPI_DELAY_UNIT_NSECS; + st->normal_xfer[1].rx_buf = st->scan_data; + + spi_message_init_with_transfers(&st->normal_msg, st->normal_xfer, + ARRAY_SIZE(st->normal_xfer)); + /* + * In sequencer mode a read is composed of four steps: + * - CS toggle (no data xfer) to get the right point in the sequence + * - CS toggle (no data xfer) to trigger a conversion of AinX0 and + * acquisition of AinX1 + * - 2 data reads, to read AinX0 and AinX1 + */ + st->seq_xfer[0].cs_change = 1; + st->seq_xfer[0].cs_change_delay.value = st->chip_info->timing_specs->t_csh_ns; + st->seq_xfer[0].cs_change_delay.unit = SPI_DELAY_UNIT_NSECS; + st->seq_xfer[1].cs_change = 1; + st->seq_xfer[1].cs_change_delay.value = st->chip_info->timing_specs->t_csh_ns; + st->seq_xfer[1].cs_change_delay.unit = SPI_DELAY_UNIT_NSECS; + + st->seq_xfer[2].rx_buf = st->scan_data; + st->seq_xfer[2].cs_change = 1; + st->seq_xfer[2].cs_change_delay.value = st->chip_info->timing_specs->t_csh_ns; + st->seq_xfer[2].cs_change_delay.unit = SPI_DELAY_UNIT_NSECS; + + spi_message_init_with_transfers(&st->seq_msg, st->seq_xfer, + ARRAY_SIZE(st->seq_xfer)); + + indio_dev->channels = st->chip_info->channels; + indio_dev->num_channels = st->chip_info->num_channels; + indio_dev->name = st->chip_info->name; + indio_dev->info = &ad7380_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->available_scan_masks = st->chip_info->available_scan_masks; + + ret = devm_iio_triggered_buffer_setup(dev, indio_dev, + iio_pollfunc_store_time, + ad7380_trigger_handler, + &ad7380_buffer_setup_ops); + if (ret) + return ret; + + ret = ad7380_init(st, external_ref_en); + if (ret) + return ret; + + return devm_iio_device_register(dev, indio_dev); +} + +static const struct of_device_id ad7380_of_match_table[] = { + { .compatible = "adi,ad7380", .data = &ad7380_chip_info }, + { .compatible = "adi,ad7381", .data = &ad7381_chip_info }, + { .compatible = "adi,ad7383", .data = &ad7383_chip_info }, + { .compatible = "adi,ad7384", .data = &ad7384_chip_info }, + { .compatible = "adi,ad7386", .data = &ad7386_chip_info }, + { .compatible = "adi,ad7387", .data = &ad7387_chip_info }, + { .compatible = "adi,ad7388", .data = &ad7388_chip_info }, + { .compatible = "adi,ad7380-4", .data = &ad7380_4_chip_info }, + { .compatible = "adi,ad7381-4", .data = &ad7381_4_chip_info }, + { .compatible = "adi,ad7383-4", .data = &ad7383_4_chip_info }, + { .compatible = "adi,ad7384-4", .data = &ad7384_4_chip_info }, + { .compatible = "adi,ad7386-4", .data = &ad7386_4_chip_info }, + { .compatible = "adi,ad7387-4", .data = &ad7387_4_chip_info }, + { .compatible = "adi,ad7388-4", .data = &ad7388_4_chip_info }, + { .compatible = "adi,adaq4370-4", .data = &adaq4370_4_chip_info }, + { .compatible = "adi,adaq4380-4", .data = &adaq4380_4_chip_info }, + { } +}; + +static const struct spi_device_id ad7380_id_table[] = { + { "ad7380", (kernel_ulong_t)&ad7380_chip_info }, + { "ad7381", (kernel_ulong_t)&ad7381_chip_info }, + { "ad7383", (kernel_ulong_t)&ad7383_chip_info }, + { "ad7384", (kernel_ulong_t)&ad7384_chip_info }, + { "ad7386", (kernel_ulong_t)&ad7386_chip_info }, + { "ad7387", (kernel_ulong_t)&ad7387_chip_info }, + { "ad7388", (kernel_ulong_t)&ad7388_chip_info }, + { "ad7380-4", (kernel_ulong_t)&ad7380_4_chip_info }, + { "ad7381-4", (kernel_ulong_t)&ad7381_4_chip_info }, + { "ad7383-4", (kernel_ulong_t)&ad7383_4_chip_info }, + { "ad7384-4", (kernel_ulong_t)&ad7384_4_chip_info }, + { "ad7386-4", (kernel_ulong_t)&ad7386_4_chip_info }, + { "ad7387-4", (kernel_ulong_t)&ad7387_4_chip_info }, + { "ad7388-4", (kernel_ulong_t)&ad7388_4_chip_info }, + { "adaq4370-4", (kernel_ulong_t)&adaq4370_4_chip_info }, + { "adaq4380-4", (kernel_ulong_t)&adaq4380_4_chip_info }, + { } +}; +MODULE_DEVICE_TABLE(spi, ad7380_id_table); + +static struct spi_driver ad7380_driver = { + .driver = { + .name = "ad7380", + .of_match_table = ad7380_of_match_table, + }, + .probe = ad7380_probe, + .id_table = ad7380_id_table, +}; +module_spi_driver(ad7380_driver); + +MODULE_AUTHOR("Stefan Popa <stefan.popa@analog.com>"); +MODULE_DESCRIPTION("Analog Devices AD738x ADC driver"); +MODULE_LICENSE("GPL"); |