summaryrefslogtreecommitdiff
path: root/drivers/iio/imu/adis16480.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/iio/imu/adis16480.c')
-rw-r--r--drivers/iio/imu/adis16480.c133
1 files changed, 96 insertions, 37 deletions
diff --git a/drivers/iio/imu/adis16480.c b/drivers/iio/imu/adis16480.c
index dfe86c589325..f81b86690b76 100644
--- a/drivers/iio/imu/adis16480.c
+++ b/drivers/iio/imu/adis16480.c
@@ -10,6 +10,7 @@
#include <linux/of_irq.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
+#include <linux/math.h>
#include <linux/mutex.h>
#include <linux/device.h>
#include <linux/kernel.h>
@@ -17,6 +18,7 @@
#include <linux/slab.h>
#include <linux/sysfs.h>
#include <linux/module.h>
+#include <linux/lcm.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
@@ -170,6 +172,11 @@ static const char * const adis16480_int_pin_names[4] = {
[ADIS16480_PIN_DIO4] = "DIO4",
};
+static bool low_rate_allow;
+module_param(low_rate_allow, bool, 0444);
+MODULE_PARM_DESC(low_rate_allow,
+ "Allow IMU rates below the minimum advisable when external clk is used in PPS mode (default: N)");
+
#ifdef CONFIG_DEBUG_FS
static ssize_t adis16480_show_firmware_revision(struct file *file,
@@ -312,7 +319,8 @@ static int adis16480_debugfs_init(struct iio_dev *indio_dev)
static int adis16480_set_freq(struct iio_dev *indio_dev, int val, int val2)
{
struct adis16480 *st = iio_priv(indio_dev);
- unsigned int t, reg;
+ unsigned int t, sample_rate = st->clk_freq;
+ int ret;
if (val < 0 || val2 < 0)
return -EINVAL;
@@ -321,28 +329,65 @@ static int adis16480_set_freq(struct iio_dev *indio_dev, int val, int val2)
if (t == 0)
return -EINVAL;
+ adis_dev_lock(&st->adis);
/*
- * When using PPS mode, the rate of data collection is equal to the
- * product of the external clock frequency and the scale factor in the
- * SYNC_SCALE register.
- * When using sync mode, or internal clock, the output data rate is
- * equal with the clock frequency divided by DEC_RATE + 1.
+ * When using PPS mode, the input clock needs to be scaled so that we have an IMU
+ * sample rate between (optimally) 4000 and 4250. After this, we can use the
+ * decimation filter to lower the sampling rate in order to get what the user wants.
+ * Optimally, the user sample rate is a multiple of both the IMU sample rate and
+ * the input clock. Hence, calculating the sync_scale dynamically gives us better
+ * chances of achieving a perfect/integer value for DEC_RATE. The math here is:
+ * 1. lcm of the input clock and the desired output rate.
+ * 2. get the highest multiple of the previous result lower than the adis max rate.
+ * 3. The last result becomes the IMU sample rate. Use that to calculate SYNC_SCALE
+ * and DEC_RATE (to get the user output rate)
*/
if (st->clk_mode == ADIS16480_CLK_PPS) {
- t = t / st->clk_freq;
- reg = ADIS16495_REG_SYNC_SCALE;
- } else {
- t = st->clk_freq / t;
- reg = ADIS16480_REG_DEC_RATE;
+ unsigned long scaled_rate = lcm(st->clk_freq, t);
+ int sync_scale;
+
+ /*
+ * If lcm is bigger than the IMU maximum sampling rate there's no perfect
+ * solution. In this case, we get the highest multiple of the input clock
+ * lower than the IMU max sample rate.
+ */
+ if (scaled_rate > st->chip_info->int_clk)
+ scaled_rate = st->chip_info->int_clk / st->clk_freq * st->clk_freq;
+ else
+ scaled_rate = st->chip_info->int_clk / scaled_rate * scaled_rate;
+
+ /*
+ * This is not an hard requirement but it's not advised to run the IMU
+ * with a sample rate lower than 4000Hz due to possible undersampling
+ * issues. However, there are users that might really want to take the risk.
+ * Hence, we provide a module parameter for them. If set, we allow sample
+ * rates lower than 4KHz. By default, we won't allow this and we just roundup
+ * the rate to the next multiple of the input clock bigger than 4KHz. This
+ * is done like this as in some cases (when DEC_RATE is 0) might give
+ * us the closest value to the one desired by the user...
+ */
+ if (scaled_rate < 4000000 && !low_rate_allow)
+ scaled_rate = roundup(4000000, st->clk_freq);
+
+ sync_scale = scaled_rate / st->clk_freq;
+ ret = __adis_write_reg_16(&st->adis, ADIS16495_REG_SYNC_SCALE, sync_scale);
+ if (ret)
+ goto error;
+
+ sample_rate = scaled_rate;
}
+ t = DIV_ROUND_CLOSEST(sample_rate, t);
+ if (t)
+ t--;
+
if (t > st->chip_info->max_dec_rate)
t = st->chip_info->max_dec_rate;
- if ((t != 0) && (st->clk_mode != ADIS16480_CLK_PPS))
- t--;
-
- return adis_write_reg_16(&st->adis, reg, t);
+ ret = __adis_write_reg_16(&st->adis, ADIS16480_REG_DEC_RATE, t);
+error:
+ adis_dev_unlock(&st->adis);
+ return ret;
}
static int adis16480_get_freq(struct iio_dev *indio_dev, int *val, int *val2)
@@ -350,34 +395,35 @@ static int adis16480_get_freq(struct iio_dev *indio_dev, int *val, int *val2)
struct adis16480 *st = iio_priv(indio_dev);
uint16_t t;
int ret;
- unsigned int freq;
- unsigned int reg;
+ unsigned int freq, sample_rate = st->clk_freq;
- if (st->clk_mode == ADIS16480_CLK_PPS)
- reg = ADIS16495_REG_SYNC_SCALE;
- else
- reg = ADIS16480_REG_DEC_RATE;
+ adis_dev_lock(&st->adis);
+
+ if (st->clk_mode == ADIS16480_CLK_PPS) {
+ u16 sync_scale;
+
+ ret = __adis_read_reg_16(&st->adis, ADIS16495_REG_SYNC_SCALE, &sync_scale);
+ if (ret)
+ goto error;
- ret = adis_read_reg_16(&st->adis, reg, &t);
+ sample_rate = st->clk_freq * sync_scale;
+ }
+
+ ret = __adis_read_reg_16(&st->adis, ADIS16480_REG_DEC_RATE, &t);
if (ret)
- return ret;
+ goto error;
- /*
- * When using PPS mode, the rate of data collection is equal to the
- * product of the external clock frequency and the scale factor in the
- * SYNC_SCALE register.
- * When using sync mode, or internal clock, the output data rate is
- * equal with the clock frequency divided by DEC_RATE + 1.
- */
- if (st->clk_mode == ADIS16480_CLK_PPS)
- freq = st->clk_freq * t;
- else
- freq = st->clk_freq / (t + 1);
+ adis_dev_unlock(&st->adis);
+
+ freq = DIV_ROUND_CLOSEST(sample_rate, (t + 1));
*val = freq / 1000;
*val2 = (freq % 1000) * 1000;
return IIO_VAL_INT_PLUS_MICRO;
+error:
+ adis_dev_unlock(&st->adis);
+ return ret;
}
enum {
@@ -552,7 +598,6 @@ static int adis16480_set_filter_freq(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan, unsigned int freq)
{
struct adis16480 *st = iio_priv(indio_dev);
- struct mutex *slock = &st->adis.state_lock;
unsigned int enable_mask, offset, reg;
unsigned int diff, best_diff;
unsigned int i, best_freq;
@@ -563,7 +608,7 @@ static int adis16480_set_filter_freq(struct iio_dev *indio_dev,
offset = ad16480_filter_data[chan->scan_index][1];
enable_mask = BIT(offset + 2);
- mutex_lock(slock);
+ adis_dev_lock(&st->adis);
ret = __adis_read_reg_16(&st->adis, reg, &val);
if (ret)
@@ -591,7 +636,7 @@ static int adis16480_set_filter_freq(struct iio_dev *indio_dev,
ret = __adis_write_reg_16(&st->adis, reg, val);
out_unlock:
- mutex_unlock(slock);
+ adis_dev_unlock(&st->adis);
return ret;
}
@@ -1278,6 +1323,20 @@ static int adis16480_probe(struct spi_device *spi)
st->clk_freq = clk_get_rate(st->ext_clk);
st->clk_freq *= 1000; /* micro */
+ if (st->clk_mode == ADIS16480_CLK_PPS) {
+ u16 sync_scale;
+
+ /*
+ * In PPS mode, the IMU sample rate is the clk_freq * sync_scale. Hence,
+ * default the IMU sample rate to the highest multiple of the input clock
+ * lower than the IMU max sample rate. The internal sample rate is the
+ * max...
+ */
+ sync_scale = st->chip_info->int_clk / st->clk_freq;
+ ret = __adis_write_reg_16(&st->adis, ADIS16495_REG_SYNC_SCALE, sync_scale);
+ if (ret)
+ return ret;
+ }
} else {
st->clk_freq = st->chip_info->int_clk;
}