diff options
Diffstat (limited to 'drivers/iio/imu/inv_mpu6050/inv_mpu_core.c')
| -rw-r--r-- | drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 39 |
1 files changed, 36 insertions, 3 deletions
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c index 96dabbd2f004..88a7c5d4e4d2 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c @@ -41,6 +41,7 @@ static const int accel_scale[] = {598, 1196, 2392, 4785}; static const struct inv_mpu6050_reg_map reg_set_6500 = { .sample_rate_div = INV_MPU6050_REG_SAMPLE_RATE_DIV, .lpf = INV_MPU6050_REG_CONFIG, + .accel_lpf = INV_MPU6500_REG_ACCEL_CONFIG_2, .user_ctrl = INV_MPU6050_REG_USER_CTRL, .fifo_en = INV_MPU6050_REG_FIFO_EN, .gyro_config = INV_MPU6050_REG_GYRO_CONFIG, @@ -211,6 +212,37 @@ int inv_mpu6050_set_power_itg(struct inv_mpu6050_state *st, bool power_on) EXPORT_SYMBOL_GPL(inv_mpu6050_set_power_itg); /** + * inv_mpu6050_set_lpf_regs() - set low pass filter registers, chip dependent + * + * MPU60xx/MPU9150 use only 1 register for accelerometer + gyroscope + * MPU6500 and above have a dedicated register for accelerometer + */ +static int inv_mpu6050_set_lpf_regs(struct inv_mpu6050_state *st, + enum inv_mpu6050_filter_e val) +{ + int result; + + result = regmap_write(st->map, st->reg->lpf, val); + if (result) + return result; + + switch (st->chip_type) { + case INV_MPU6050: + case INV_MPU6000: + case INV_MPU9150: + /* old chips, nothing to do */ + result = 0; + break; + default: + /* set accel lpf */ + result = regmap_write(st->map, st->reg->accel_lpf, val); + break; + } + + return result; +} + +/** * inv_mpu6050_init_config() - Initialize hardware, disable FIFO. * * Initial configuration: @@ -233,8 +265,7 @@ static int inv_mpu6050_init_config(struct iio_dev *indio_dev) if (result) return result; - d = INV_MPU6050_FILTER_20HZ; - result = regmap_write(st->map, st->reg->lpf, d); + result = inv_mpu6050_set_lpf_regs(st, INV_MPU6050_FILTER_20HZ); if (result) return result; @@ -537,6 +568,8 @@ error_write_raw: * would be alising. This function basically search for the * correct low pass parameters based on the fifo rate, e.g, * sampling frequency. + * + * lpf is set automatically when setting sampling rate to avoid any aliases. */ static int inv_mpu6050_set_lpf(struct inv_mpu6050_state *st, int rate) { @@ -552,7 +585,7 @@ static int inv_mpu6050_set_lpf(struct inv_mpu6050_state *st, int rate) while ((h < hz[i]) && (i < ARRAY_SIZE(d) - 1)) i++; data = d[i]; - result = regmap_write(st->map, st->reg->lpf, data); + result = inv_mpu6050_set_lpf_regs(st, data); if (result) return result; st->chip_config.lpf = data; |