summaryrefslogtreecommitdiff
path: root/drivers/iio/magnetometer/ak8975.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/iio/magnetometer/ak8975.c')
-rw-r--r--drivers/iio/magnetometer/ak8975.c505
1 files changed, 377 insertions, 128 deletions
diff --git a/drivers/iio/magnetometer/ak8975.c b/drivers/iio/magnetometer/ak8975.c
index bf5ef077e791..b13936dacc78 100644
--- a/drivers/iio/magnetometer/ak8975.c
+++ b/drivers/iio/magnetometer/ak8975.c
@@ -64,10 +64,10 @@
#define AK8975_REG_CNTL 0x0A
#define AK8975_REG_CNTL_MODE_SHIFT 0
#define AK8975_REG_CNTL_MODE_MASK (0xF << AK8975_REG_CNTL_MODE_SHIFT)
-#define AK8975_REG_CNTL_MODE_POWER_DOWN 0
-#define AK8975_REG_CNTL_MODE_ONCE 1
-#define AK8975_REG_CNTL_MODE_SELF_TEST 8
-#define AK8975_REG_CNTL_MODE_FUSE_ROM 0xF
+#define AK8975_REG_CNTL_MODE_POWER_DOWN 0x00
+#define AK8975_REG_CNTL_MODE_ONCE 0x01
+#define AK8975_REG_CNTL_MODE_SELF_TEST 0x08
+#define AK8975_REG_CNTL_MODE_FUSE_ROM 0x0F
#define AK8975_REG_RSVC 0x0B
#define AK8975_REG_ASTC 0x0C
@@ -81,18 +81,278 @@
#define AK8975_MAX_REGS AK8975_REG_ASAZ
/*
+ * AK09912 Register definitions
+ */
+#define AK09912_REG_WIA1 0x00
+#define AK09912_REG_WIA2 0x01
+#define AK09912_DEVICE_ID 0x04
+#define AK09911_DEVICE_ID 0x05
+
+#define AK09911_REG_INFO1 0x02
+#define AK09911_REG_INFO2 0x03
+
+#define AK09912_REG_ST1 0x10
+
+#define AK09912_REG_ST1_DRDY_SHIFT 0
+#define AK09912_REG_ST1_DRDY_MASK (1 << AK09912_REG_ST1_DRDY_SHIFT)
+
+#define AK09912_REG_HXL 0x11
+#define AK09912_REG_HXH 0x12
+#define AK09912_REG_HYL 0x13
+#define AK09912_REG_HYH 0x14
+#define AK09912_REG_HZL 0x15
+#define AK09912_REG_HZH 0x16
+#define AK09912_REG_TMPS 0x17
+
+#define AK09912_REG_ST2 0x18
+#define AK09912_REG_ST2_HOFL_SHIFT 3
+#define AK09912_REG_ST2_HOFL_MASK (1 << AK09912_REG_ST2_HOFL_SHIFT)
+
+#define AK09912_REG_CNTL1 0x30
+
+#define AK09912_REG_CNTL2 0x31
+#define AK09912_REG_CNTL_MODE_POWER_DOWN 0x00
+#define AK09912_REG_CNTL_MODE_ONCE 0x01
+#define AK09912_REG_CNTL_MODE_SELF_TEST 0x10
+#define AK09912_REG_CNTL_MODE_FUSE_ROM 0x1F
+#define AK09912_REG_CNTL2_MODE_SHIFT 0
+#define AK09912_REG_CNTL2_MODE_MASK (0x1F << AK09912_REG_CNTL2_MODE_SHIFT)
+
+#define AK09912_REG_CNTL3 0x32
+
+#define AK09912_REG_TS1 0x33
+#define AK09912_REG_TS2 0x34
+#define AK09912_REG_TS3 0x35
+#define AK09912_REG_I2CDIS 0x36
+#define AK09912_REG_TS4 0x37
+
+#define AK09912_REG_ASAX 0x60
+#define AK09912_REG_ASAY 0x61
+#define AK09912_REG_ASAZ 0x62
+
+#define AK09912_MAX_REGS AK09912_REG_ASAZ
+
+/*
* Miscellaneous values.
*/
#define AK8975_MAX_CONVERSION_TIMEOUT 500
#define AK8975_CONVERSION_DONE_POLL_TIME 10
#define AK8975_DATA_READY_TIMEOUT ((100*HZ)/1000)
-#define RAW_TO_GAUSS_8975(asa) ((((asa) + 128) * 3000) / 256)
-#define RAW_TO_GAUSS_8963(asa) ((((asa) + 128) * 6000) / 256)
+
+/*
+ * Precalculate scale factor (in Gauss units) for each axis and
+ * store in the device data.
+ *
+ * This scale factor is axis-dependent, and is derived from 3 calibration
+ * factors ASA(x), ASA(y), and ASA(z).
+ *
+ * These ASA values are read from the sensor device at start of day, and
+ * cached in the device context struct.
+ *
+ * Adjusting the flux value with the sensitivity adjustment value should be
+ * done via the following formula:
+ *
+ * Hadj = H * ( ( ( (ASA-128)*0.5 ) / 128 ) + 1 )
+ * where H is the raw value, ASA is the sensitivity adjustment, and Hadj
+ * is the resultant adjusted value.
+ *
+ * We reduce the formula to:
+ *
+ * Hadj = H * (ASA + 128) / 256
+ *
+ * H is in the range of -4096 to 4095. The magnetometer has a range of
+ * +-1229uT. To go from the raw value to uT is:
+ *
+ * HuT = H * 1229/4096, or roughly, 3/10.
+ *
+ * Since 1uT = 0.01 gauss, our final scale factor becomes:
+ *
+ * Hadj = H * ((ASA + 128) / 256) * 3/10 * 1/100
+ * Hadj = H * ((ASA + 128) * 0.003) / 256
+ *
+ * Since ASA doesn't change, we cache the resultant scale factor into the
+ * device context in ak8975_setup().
+ *
+ * Given we use IIO_VAL_INT_PLUS_MICRO bit when displaying the scale, we
+ * multiply the stored scale value by 1e6.
+ */
+static long ak8975_raw_to_gauss(u16 data)
+{
+ return (((long)data + 128) * 3000) / 256;
+}
+
+/*
+ * For AK8963 and AK09911, same calculation, but the device is less sensitive:
+ *
+ * H is in the range of +-8190. The magnetometer has a range of
+ * +-4912uT. To go from the raw value to uT is:
+ *
+ * HuT = H * 4912/8190, or roughly, 6/10, instead of 3/10.
+ */
+
+static long ak8963_09911_raw_to_gauss(u16 data)
+{
+ return (((long)data + 128) * 6000) / 256;
+}
+
+/*
+ * For AK09912, same calculation, except the device is more sensitive:
+ *
+ * H is in the range of -32752 to 32752. The magnetometer has a range of
+ * +-4912uT. To go from the raw value to uT is:
+ *
+ * HuT = H * 4912/32752, or roughly, 3/20, instead of 3/10.
+ */
+static long ak09912_raw_to_gauss(u16 data)
+{
+ return (((long)data + 128) * 1500) / 256;
+}
/* Compatible Asahi Kasei Compass parts */
enum asahi_compass_chipset {
AK8975,
AK8963,
+ AK09911,
+ AK09912,
+ AK_MAX_TYPE
+};
+
+enum ak_ctrl_reg_addr {
+ ST1,
+ ST2,
+ CNTL,
+ ASA_BASE,
+ MAX_REGS,
+ REGS_END,
+};
+
+enum ak_ctrl_reg_mask {
+ ST1_DRDY,
+ ST2_HOFL,
+ ST2_DERR,
+ CNTL_MODE,
+ MASK_END,
+};
+
+enum ak_ctrl_mode {
+ POWER_DOWN,
+ MODE_ONCE,
+ SELF_TEST,
+ FUSE_ROM,
+ MODE_END,
+};
+
+struct ak_def {
+ enum asahi_compass_chipset type;
+ long (*raw_to_gauss)(u16 data);
+ u16 range;
+ u8 ctrl_regs[REGS_END];
+ u8 ctrl_masks[MASK_END];
+ u8 ctrl_modes[MODE_END];
+ u8 data_regs[3];
+};
+
+static struct ak_def ak_def_array[AK_MAX_TYPE] = {
+ {
+ .type = AK8975,
+ .raw_to_gauss = ak8975_raw_to_gauss,
+ .range = 4096,
+ .ctrl_regs = {
+ AK8975_REG_ST1,
+ AK8975_REG_ST2,
+ AK8975_REG_CNTL,
+ AK8975_REG_ASAX,
+ AK8975_MAX_REGS},
+ .ctrl_masks = {
+ AK8975_REG_ST1_DRDY_MASK,
+ AK8975_REG_ST2_HOFL_MASK,
+ AK8975_REG_ST2_DERR_MASK,
+ AK8975_REG_CNTL_MODE_MASK},
+ .ctrl_modes = {
+ AK8975_REG_CNTL_MODE_POWER_DOWN,
+ AK8975_REG_CNTL_MODE_ONCE,
+ AK8975_REG_CNTL_MODE_SELF_TEST,
+ AK8975_REG_CNTL_MODE_FUSE_ROM},
+ .data_regs = {
+ AK8975_REG_HXL,
+ AK8975_REG_HYL,
+ AK8975_REG_HZL},
+ },
+ {
+ .type = AK8963,
+ .raw_to_gauss = ak8963_09911_raw_to_gauss,
+ .range = 8190,
+ .ctrl_regs = {
+ AK8975_REG_ST1,
+ AK8975_REG_ST2,
+ AK8975_REG_CNTL,
+ AK8975_REG_ASAX,
+ AK8975_MAX_REGS},
+ .ctrl_masks = {
+ AK8975_REG_ST1_DRDY_MASK,
+ AK8975_REG_ST2_HOFL_MASK,
+ 0,
+ AK8975_REG_CNTL_MODE_MASK},
+ .ctrl_modes = {
+ AK8975_REG_CNTL_MODE_POWER_DOWN,
+ AK8975_REG_CNTL_MODE_ONCE,
+ AK8975_REG_CNTL_MODE_SELF_TEST,
+ AK8975_REG_CNTL_MODE_FUSE_ROM},
+ .data_regs = {
+ AK8975_REG_HXL,
+ AK8975_REG_HYL,
+ AK8975_REG_HZL},
+ },
+ {
+ .type = AK09911,
+ .raw_to_gauss = ak8963_09911_raw_to_gauss,
+ .range = 8192,
+ .ctrl_regs = {
+ AK09912_REG_ST1,
+ AK09912_REG_ST2,
+ AK09912_REG_CNTL2,
+ AK09912_REG_ASAX,
+ AK09912_MAX_REGS},
+ .ctrl_masks = {
+ AK09912_REG_ST1_DRDY_MASK,
+ AK09912_REG_ST2_HOFL_MASK,
+ 0,
+ AK09912_REG_CNTL2_MODE_MASK},
+ .ctrl_modes = {
+ AK09912_REG_CNTL_MODE_POWER_DOWN,
+ AK09912_REG_CNTL_MODE_ONCE,
+ AK09912_REG_CNTL_MODE_SELF_TEST,
+ AK09912_REG_CNTL_MODE_FUSE_ROM},
+ .data_regs = {
+ AK09912_REG_HXL,
+ AK09912_REG_HYL,
+ AK09912_REG_HZL},
+ },
+ {
+ .type = AK09912,
+ .raw_to_gauss = ak09912_raw_to_gauss,
+ .range = 32752,
+ .ctrl_regs = {
+ AK09912_REG_ST1,
+ AK09912_REG_ST2,
+ AK09912_REG_CNTL2,
+ AK09912_REG_ASAX,
+ AK09912_MAX_REGS},
+ .ctrl_masks = {
+ AK09912_REG_ST1_DRDY_MASK,
+ AK09912_REG_ST2_HOFL_MASK,
+ 0,
+ AK09912_REG_CNTL2_MODE_MASK},
+ .ctrl_modes = {
+ AK09912_REG_CNTL_MODE_POWER_DOWN,
+ AK09912_REG_CNTL_MODE_ONCE,
+ AK09912_REG_CNTL_MODE_SELF_TEST,
+ AK09912_REG_CNTL_MODE_FUSE_ROM},
+ .data_regs = {
+ AK09912_REG_HXL,
+ AK09912_REG_HYL,
+ AK09912_REG_HZL},
+ }
};
/*
@@ -100,40 +360,82 @@ enum asahi_compass_chipset {
*/
struct ak8975_data {
struct i2c_client *client;
+ struct ak_def *def;
struct attribute_group attrs;
struct mutex lock;
u8 asa[3];
long raw_to_gauss[3];
- u8 reg_cache[AK8975_MAX_REGS];
int eoc_gpio;
int eoc_irq;
wait_queue_head_t data_ready_queue;
unsigned long flags;
- enum asahi_compass_chipset chipset;
+ u8 cntl_cache;
};
-static const int ak8975_index_to_reg[] = {
- AK8975_REG_HXL, AK8975_REG_HYL, AK8975_REG_HZL,
-};
+/*
+ * Return 0 if the i2c device is the one we expect.
+ * return a negative error number otherwise
+ */
+static int ak8975_who_i_am(struct i2c_client *client,
+ enum asahi_compass_chipset type)
+{
+ u8 wia_val[2];
+ int ret;
+
+ /*
+ * Signature for each device:
+ * Device | WIA1 | WIA2
+ * AK09912 | DEVICE_ID | AK09912_DEVICE_ID
+ * AK09911 | DEVICE_ID | AK09911_DEVICE_ID
+ * AK8975 | DEVICE_ID | NA
+ * AK8963 | DEVICE_ID | NA
+ */
+ ret = i2c_smbus_read_i2c_block_data(client, AK09912_REG_WIA1,
+ 2, wia_val);
+ if (ret < 0) {
+ dev_err(&client->dev, "Error reading WIA\n");
+ return ret;
+ }
+
+ if (wia_val[0] != AK8975_DEVICE_ID)
+ return -ENODEV;
+
+ switch (type) {
+ case AK8975:
+ case AK8963:
+ return 0;
+ case AK09911:
+ if (wia_val[1] == AK09911_DEVICE_ID)
+ return 0;
+ break;
+ case AK09912:
+ if (wia_val[1] == AK09912_DEVICE_ID)
+ return 0;
+ break;
+ default:
+ dev_err(&client->dev, "Type %d unknown\n", type);
+ }
+ return -ENODEV;
+}
/*
- * Helper function to write to the I2C device's registers.
+ * Helper function to write to CNTL register.
*/
-static int ak8975_write_data(struct i2c_client *client,
- u8 reg, u8 val, u8 mask, u8 shift)
+static int ak8975_set_mode(struct ak8975_data *data, enum ak_ctrl_mode mode)
{
- struct iio_dev *indio_dev = i2c_get_clientdata(client);
- struct ak8975_data *data = iio_priv(indio_dev);
u8 regval;
int ret;
- regval = (data->reg_cache[reg] & ~mask) | (val << shift);
- ret = i2c_smbus_write_byte_data(client, reg, regval);
+ regval = (data->cntl_cache & ~data->def->ctrl_masks[CNTL_MODE]) |
+ data->def->ctrl_modes[mode];
+ ret = i2c_smbus_write_byte_data(data->client,
+ data->def->ctrl_regs[CNTL], regval);
if (ret < 0) {
- dev_err(&client->dev, "Write to device fails status %x\n", ret);
return ret;
}
- data->reg_cache[reg] = regval;
+ data->cntl_cache = regval;
+ /* After mode change wait atleast 100us */
+ usleep_range(100, 500);
return 0;
}
@@ -166,8 +468,8 @@ static int ak8975_setup_irq(struct ak8975_data *data)
irq = gpio_to_irq(data->eoc_gpio);
rc = devm_request_irq(&client->dev, irq, ak8975_irq_handler,
- IRQF_TRIGGER_RISING | IRQF_ONESHOT,
- dev_name(&client->dev), data);
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ dev_name(&client->dev), data);
if (rc < 0) {
dev_err(&client->dev,
"irq %d request failed, (gpio %d): %d\n",
@@ -191,34 +493,18 @@ static int ak8975_setup(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
struct ak8975_data *data = iio_priv(indio_dev);
- u8 device_id;
int ret;
- /* Confirm that the device we're talking to is really an AK8975. */
- ret = i2c_smbus_read_byte_data(client, AK8975_REG_WIA);
- if (ret < 0) {
- dev_err(&client->dev, "Error reading WIA\n");
- return ret;
- }
- device_id = ret;
- if (device_id != AK8975_DEVICE_ID) {
- dev_err(&client->dev, "Device ak8975 not found\n");
- return -ENODEV;
- }
-
/* Write the fused rom access mode. */
- ret = ak8975_write_data(client,
- AK8975_REG_CNTL,
- AK8975_REG_CNTL_MODE_FUSE_ROM,
- AK8975_REG_CNTL_MODE_MASK,
- AK8975_REG_CNTL_MODE_SHIFT);
+ ret = ak8975_set_mode(data, FUSE_ROM);
if (ret < 0) {
dev_err(&client->dev, "Error in setting fuse access mode\n");
return ret;
}
/* Get asa data and store in the device data. */
- ret = i2c_smbus_read_i2c_block_data(client, AK8975_REG_ASAX,
+ ret = i2c_smbus_read_i2c_block_data(client,
+ data->def->ctrl_regs[ASA_BASE],
3, data->asa);
if (ret < 0) {
dev_err(&client->dev, "Not able to read asa data\n");
@@ -226,13 +512,13 @@ static int ak8975_setup(struct i2c_client *client)
}
/* After reading fuse ROM data set power-down mode */
- ret = ak8975_write_data(client,
- AK8975_REG_CNTL,
- AK8975_REG_CNTL_MODE_POWER_DOWN,
- AK8975_REG_CNTL_MODE_MASK,
- AK8975_REG_CNTL_MODE_SHIFT);
+ ret = ak8975_set_mode(data, POWER_DOWN);
+ if (ret < 0) {
+ dev_err(&client->dev, "Error in setting power-down mode\n");
+ return ret;
+ }
- if (data->eoc_gpio > 0 || client->irq) {
+ if (data->eoc_gpio > 0 || client->irq > 0) {
ret = ak8975_setup_irq(data);
if (ret < 0) {
dev_err(&client->dev,
@@ -241,61 +527,9 @@ static int ak8975_setup(struct i2c_client *client)
}
}
- if (ret < 0) {
- dev_err(&client->dev, "Error in setting power-down mode\n");
- return ret;
- }
-
-/*
- * Precalculate scale factor (in Gauss units) for each axis and
- * store in the device data.
- *
- * This scale factor is axis-dependent, and is derived from 3 calibration
- * factors ASA(x), ASA(y), and ASA(z).
- *
- * These ASA values are read from the sensor device at start of day, and
- * cached in the device context struct.
- *
- * Adjusting the flux value with the sensitivity adjustment value should be
- * done via the following formula:
- *
- * Hadj = H * ( ( ( (ASA-128)*0.5 ) / 128 ) + 1 )
- *
- * where H is the raw value, ASA is the sensitivity adjustment, and Hadj
- * is the resultant adjusted value.
- *
- * We reduce the formula to:
- *
- * Hadj = H * (ASA + 128) / 256
- *
- * H is in the range of -4096 to 4095. The magnetometer has a range of
- * +-1229uT. To go from the raw value to uT is:
- *
- * HuT = H * 1229/4096, or roughly, 3/10.
- *
- * Since 1uT = 0.01 gauss, our final scale factor becomes:
- *
- * Hadj = H * ((ASA + 128) / 256) * 3/10 * 1/100
- * Hadj = H * ((ASA + 128) * 0.003) / 256
- *
- * Since ASA doesn't change, we cache the resultant scale factor into the
- * device context in ak8975_setup().
- */
- if (data->chipset == AK8963) {
- /*
- * H range is +-8190 and magnetometer range is +-4912.
- * So HuT using the above explanation for 8975,
- * 4912/8190 = ~ 6/10.
- * So the Hadj should use 6/10 instead of 3/10.
- */
- data->raw_to_gauss[0] = RAW_TO_GAUSS_8963(data->asa[0]);
- data->raw_to_gauss[1] = RAW_TO_GAUSS_8963(data->asa[1]);
- data->raw_to_gauss[2] = RAW_TO_GAUSS_8963(data->asa[2]);
- } else {
- data->raw_to_gauss[0] = RAW_TO_GAUSS_8975(data->asa[0]);
- data->raw_to_gauss[1] = RAW_TO_GAUSS_8975(data->asa[1]);
- data->raw_to_gauss[2] = RAW_TO_GAUSS_8975(data->asa[2]);
- }
+ data->raw_to_gauss[0] = data->def->raw_to_gauss(data->asa[0]);
+ data->raw_to_gauss[1] = data->def->raw_to_gauss(data->asa[1]);
+ data->raw_to_gauss[2] = data->def->raw_to_gauss(data->asa[2]);
return 0;
}
@@ -318,7 +552,7 @@ static int wait_conversion_complete_gpio(struct ak8975_data *data)
return -EINVAL;
}
- ret = i2c_smbus_read_byte_data(client, AK8975_REG_ST1);
+ ret = i2c_smbus_read_byte_data(client, data->def->ctrl_regs[ST1]);
if (ret < 0)
dev_err(&client->dev, "Error in reading ST1\n");
@@ -335,7 +569,8 @@ static int wait_conversion_complete_polled(struct ak8975_data *data)
/* Wait for the conversion to complete. */
while (timeout_ms) {
msleep(AK8975_CONVERSION_DONE_POLL_TIME);
- ret = i2c_smbus_read_byte_data(client, AK8975_REG_ST1);
+ ret = i2c_smbus_read_byte_data(client,
+ data->def->ctrl_regs[ST1]);
if (ret < 0) {
dev_err(&client->dev, "Error in reading ST1\n");
return ret;
@@ -378,11 +613,7 @@ static int ak8975_read_axis(struct iio_dev *indio_dev, int index, int *val)
mutex_lock(&data->lock);
/* Set up the device for taking a sample. */
- ret = ak8975_write_data(client,
- AK8975_REG_CNTL,
- AK8975_REG_CNTL_MODE_ONCE,
- AK8975_REG_CNTL_MODE_MASK,
- AK8975_REG_CNTL_MODE_SHIFT);
+ ret = ak8975_set_mode(data, MODE_ONCE);
if (ret < 0) {
dev_err(&client->dev, "Error in setting operating mode\n");
goto exit;
@@ -399,14 +630,15 @@ static int ak8975_read_axis(struct iio_dev *indio_dev, int index, int *val)
goto exit;
/* This will be executed only for non-interrupt based waiting case */
- if (ret & AK8975_REG_ST1_DRDY_MASK) {
- ret = i2c_smbus_read_byte_data(client, AK8975_REG_ST2);
+ if (ret & data->def->ctrl_masks[ST1_DRDY]) {
+ ret = i2c_smbus_read_byte_data(client,
+ data->def->ctrl_regs[ST2]);
if (ret < 0) {
dev_err(&client->dev, "Error in reading ST2\n");
goto exit;
}
- if (ret & (AK8975_REG_ST2_DERR_MASK |
- AK8975_REG_ST2_HOFL_MASK)) {
+ if (ret & (data->def->ctrl_masks[ST2_DERR] |
+ data->def->ctrl_masks[ST2_HOFL])) {
dev_err(&client->dev, "ST2 status error 0x%x\n", ret);
ret = -EINVAL;
goto exit;
@@ -415,7 +647,7 @@ static int ak8975_read_axis(struct iio_dev *indio_dev, int index, int *val)
/* Read the flux value from the appropriate register
(the register is specified in the iio device attributes). */
- ret = i2c_smbus_read_word_data(client, ak8975_index_to_reg[index]);
+ ret = i2c_smbus_read_word_data(client, data->def->data_regs[index]);
if (ret < 0) {
dev_err(&client->dev, "Read axis data fails\n");
goto exit;
@@ -424,7 +656,7 @@ static int ak8975_read_axis(struct iio_dev *indio_dev, int index, int *val)
mutex_unlock(&data->lock);
/* Clamp to valid range. */
- *val = clamp_t(s16, ret, -4096, 4095);
+ *val = clamp_t(s16, ret, -data->def->range, data->def->range);
return IIO_VAL_INT;
exit:
@@ -473,6 +705,8 @@ static const struct acpi_device_id ak_acpi_match[] = {
{"AK8975", AK8975},
{"AK8963", AK8963},
{"INVN6500", AK8963},
+ {"AK09911", AK09911},
+ {"AK09912", AK09912},
{ },
};
MODULE_DEVICE_TABLE(acpi, ak_acpi_match);
@@ -498,6 +732,7 @@ static int ak8975_probe(struct i2c_client *client,
int eoc_gpio;
int err;
const char *name = NULL;
+ enum asahi_compass_chipset chipset;
/* Grab and set up the supplied GPIO. */
if (client->dev.platform_data)
@@ -537,42 +772,50 @@ static int ak8975_probe(struct i2c_client *client,
/* id will be NULL when enumerated via ACPI */
if (id) {
- data->chipset =
- (enum asahi_compass_chipset)(id->driver_data);
+ chipset = (enum asahi_compass_chipset)(id->driver_data);
name = id->name;
} else if (ACPI_HANDLE(&client->dev))
- name = ak8975_match_acpi_device(&client->dev, &data->chipset);
+ name = ak8975_match_acpi_device(&client->dev, &chipset);
else
return -ENOSYS;
+ if (chipset >= AK_MAX_TYPE) {
+ dev_err(&client->dev, "AKM device type unsupported: %d\n",
+ chipset);
+ return -ENODEV;
+ }
+
+ data->def = &ak_def_array[chipset];
+ err = ak8975_who_i_am(client, data->def->type);
+ if (err < 0) {
+ dev_err(&client->dev, "Unexpected device\n");
+ return err;
+ }
dev_dbg(&client->dev, "Asahi compass chip %s\n", name);
/* Perform some basic start-of-day setup of the device. */
err = ak8975_setup(client);
if (err < 0) {
- dev_err(&client->dev, "AK8975 initialization fails\n");
+ dev_err(&client->dev, "%s initialization fails\n", name);
return err;
}
- data->client = client;
mutex_init(&data->lock);
- data->eoc_gpio = eoc_gpio;
indio_dev->dev.parent = &client->dev;
indio_dev->channels = ak8975_channels;
indio_dev->num_channels = ARRAY_SIZE(ak8975_channels);
indio_dev->info = &ak8975_info;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->name = name;
- err = devm_iio_device_register(&client->dev, indio_dev);
- if (err < 0)
- return err;
-
- return 0;
+ return devm_iio_device_register(&client->dev, indio_dev);
}
static const struct i2c_device_id ak8975_id[] = {
{"ak8975", AK8975},
{"ak8963", AK8963},
+ {"AK8963", AK8963},
+ {"ak09911", AK09911},
+ {"ak09912", AK09912},
{}
};
@@ -581,14 +824,20 @@ MODULE_DEVICE_TABLE(i2c, ak8975_id);
static const struct of_device_id ak8975_of_match[] = {
{ .compatible = "asahi-kasei,ak8975", },
{ .compatible = "ak8975", },
- { }
+ { .compatible = "asahi-kasei,ak8963", },
+ { .compatible = "ak8963", },
+ { .compatible = "asahi-kasei,ak09911", },
+ { .compatible = "ak09911", },
+ { .compatible = "asahi-kasei,ak09912", },
+ { .compatible = "ak09912", },
+ {}
};
MODULE_DEVICE_TABLE(of, ak8975_of_match);
static struct i2c_driver ak8975_driver = {
.driver = {
.name = "ak8975",
- .of_match_table = ak8975_of_match,
+ .of_match_table = of_match_ptr(ak8975_of_match),
.acpi_match_table = ACPI_PTR(ak_acpi_match),
},
.probe = ak8975_probe,