diff options
Diffstat (limited to 'drivers/iio/pressure/rohm-bm1390.c')
| -rw-r--r-- | drivers/iio/pressure/rohm-bm1390.c | 83 |
1 files changed, 31 insertions, 52 deletions
diff --git a/drivers/iio/pressure/rohm-bm1390.c b/drivers/iio/pressure/rohm-bm1390.c index ccaa07a569c9..9c1197f0e742 100644 --- a/drivers/iio/pressure/rohm-bm1390.c +++ b/drivers/iio/pressure/rohm-bm1390.c @@ -8,6 +8,7 @@ #include <linux/bitfield.h> #include <linux/bits.h> +#include <linux/cleanup.h> #include <linux/device.h> #include <linux/i2c.h> #include <linux/module.h> @@ -138,7 +139,7 @@ enum { struct bm1390_data_buf { u32 pressure; __be16 temp; - s64 ts __aligned(8); + aligned_s64 ts; }; /* BM1390 has FIFO for 4 pressure samples */ @@ -263,14 +264,14 @@ static int bm1390_read_data(struct bm1390_data *data, { int ret, warn; - mutex_lock(&data->mutex); + guard(mutex)(&data->mutex); /* * We use 'continuous mode' even for raw read because according to the * data-sheet an one-shot mode can't be used with IIR filter. */ ret = bm1390_meas_set(data, BM1390_MEAS_MODE_CONTINUOUS); if (ret) - goto unlock_out; + return ret; switch (chan->type) { case IIO_PRESSURE: @@ -287,10 +288,8 @@ static int bm1390_read_data(struct bm1390_data *data, warn = bm1390_meas_set(data, BM1390_MEAS_MODE_STOP); if (warn) dev_warn(data->dev, "Failed to stop measurement (%d)\n", warn); -unlock_out: - mutex_unlock(&data->mutex); - return ret; + return 0; } static int bm1390_read_raw(struct iio_dev *idev, @@ -417,9 +416,6 @@ static int __bm1390_fifo_flush(struct iio_dev *idev, unsigned int samples, return ret; } - if (ret) - return ret; - for (i = 0; i < smp_lvl; i++) { buffer[i].temp = temp; iio_push_to_buffers(idev, &buffer[i]); @@ -546,38 +542,33 @@ static int bm1390_fifo_enable(struct iio_dev *idev) if (data->irq <= 0) return -EINVAL; - mutex_lock(&data->mutex); - if (data->trigger_enabled) { - ret = -EBUSY; - goto unlock_out; - } + guard(mutex)(&data->mutex); + + if (data->trigger_enabled) + return -EBUSY; /* Update watermark to HW */ ret = bm1390_fifo_set_wmi(data); if (ret) - goto unlock_out; + return ret; /* Enable WMI_IRQ */ ret = regmap_set_bits(data->regmap, BM1390_REG_MODE_CTRL, BM1390_MASK_WMI_EN); if (ret) - goto unlock_out; + return ret; /* Enable FIFO */ ret = regmap_set_bits(data->regmap, BM1390_REG_FIFO_CTRL, BM1390_MASK_FIFO_EN); if (ret) - goto unlock_out; + return ret; data->state = BM1390_STATE_FIFO; data->old_timestamp = iio_get_time_ns(idev); - ret = bm1390_meas_set(data, BM1390_MEAS_MODE_CONTINUOUS); - -unlock_out: - mutex_unlock(&data->mutex); - return ret; + return bm1390_meas_set(data, BM1390_MEAS_MODE_CONTINUOUS); } static int bm1390_fifo_disable(struct iio_dev *idev) @@ -587,27 +578,22 @@ static int bm1390_fifo_disable(struct iio_dev *idev) msleep(1); - mutex_lock(&data->mutex); + guard(mutex)(&data->mutex); ret = bm1390_meas_set(data, BM1390_MEAS_MODE_STOP); if (ret) - goto unlock_out; + return ret; /* Disable FIFO */ ret = regmap_clear_bits(data->regmap, BM1390_REG_FIFO_CTRL, BM1390_MASK_FIFO_EN); if (ret) - goto unlock_out; + return ret; data->state = BM1390_STATE_SAMPLE; /* Disable WMI_IRQ */ - ret = regmap_clear_bits(data->regmap, BM1390_REG_MODE_CTRL, + return regmap_clear_bits(data->regmap, BM1390_REG_MODE_CTRL, BM1390_MASK_WMI_EN); - -unlock_out: - mutex_unlock(&data->mutex); - - return ret; } static int bm1390_buffer_postenable(struct iio_dev *idev) @@ -691,25 +677,24 @@ static irqreturn_t bm1390_irq_thread_handler(int irq, void *private) { struct iio_dev *idev = private; struct bm1390_data *data = iio_priv(idev); - int ret = IRQ_NONE; - mutex_lock(&data->mutex); + guard(mutex)(&data->mutex); if (data->trigger_enabled) { iio_trigger_poll_nested(data->trig); - ret = IRQ_HANDLED; - } else if (data->state == BM1390_STATE_FIFO) { + return IRQ_HANDLED; + } + + if (data->state == BM1390_STATE_FIFO) { int ok; ok = __bm1390_fifo_flush(idev, BM1390_FIFO_LENGTH, data->timestamp); if (ok > 0) - ret = IRQ_HANDLED; + return IRQ_HANDLED; } - mutex_unlock(&data->mutex); - - return ret; + return IRQ_NONE; } static int bm1390_set_drdy_irq(struct bm1390_data *data, bool en) @@ -725,17 +710,16 @@ static int bm1390_trigger_set_state(struct iio_trigger *trig, bool state) { struct bm1390_data *data = iio_trigger_get_drvdata(trig); - int ret = 0; + int ret; - mutex_lock(&data->mutex); + guard(mutex)(&data->mutex); if (data->trigger_enabled == state) - goto unlock_out; + return 0; if (data->state == BM1390_STATE_FIFO) { dev_warn(data->dev, "Can't set trigger when FIFO enabled\n"); - ret = -EBUSY; - goto unlock_out; + return -EBUSY; } data->trigger_enabled = state; @@ -743,13 +727,13 @@ static int bm1390_trigger_set_state(struct iio_trigger *trig, if (state) { ret = bm1390_meas_set(data, BM1390_MEAS_MODE_CONTINUOUS); if (ret) - goto unlock_out; + return ret; } else { int dummy; ret = bm1390_meas_set(data, BM1390_MEAS_MODE_STOP); if (ret) - goto unlock_out; + return ret; /* * We need to read the status register in order to ACK the @@ -761,12 +745,7 @@ static int bm1390_trigger_set_state(struct iio_trigger *trig, dev_warn(data->dev, "status read failed\n"); } - ret = bm1390_set_drdy_irq(data, state); - -unlock_out: - mutex_unlock(&data->mutex); - - return ret; + return bm1390_set_drdy_irq(data, state); } static const struct iio_trigger_ops bm1390_trigger_ops = { |