summaryrefslogtreecommitdiff
path: root/drivers/iio/pressure/zpa2326.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/iio/pressure/zpa2326.c')
-rw-r--r--drivers/iio/pressure/zpa2326.c1735
1 files changed, 1735 insertions, 0 deletions
diff --git a/drivers/iio/pressure/zpa2326.c b/drivers/iio/pressure/zpa2326.c
new file mode 100644
index 000000000000..19d2eb46fda6
--- /dev/null
+++ b/drivers/iio/pressure/zpa2326.c
@@ -0,0 +1,1735 @@
+/*
+ * Murata ZPA2326 pressure and temperature sensor IIO driver
+ *
+ * Copyright (c) 2016 Parrot S.A.
+ *
+ * Author: Gregor Boirie <gregor.boirie@parrot.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+/**
+ * DOC: ZPA2326 theory of operations
+ *
+ * This driver supports %INDIO_DIRECT_MODE and %INDIO_BUFFER_TRIGGERED IIO
+ * modes.
+ * A internal hardware trigger is also implemented to dispatch registered IIO
+ * trigger consumers upon "sample ready" interrupts.
+ *
+ * ZPA2326 hardware supports 2 sampling mode: one shot and continuous.
+ *
+ * A complete one shot sampling cycle gets device out of low power mode,
+ * performs pressure and temperature measurements, then automatically switches
+ * back to low power mode. It is meant for on demand sampling with optimal power
+ * saving at the cost of lower sampling rate and higher software overhead.
+ * This is a natural candidate for IIO read_raw hook implementation
+ * (%INDIO_DIRECT_MODE). It is also used for triggered buffering support to
+ * ensure explicit synchronization with external trigger events
+ * (%INDIO_BUFFER_TRIGGERED).
+ *
+ * The continuous mode works according to a periodic hardware measurement
+ * process continuously pushing samples into an internal hardware FIFO (for
+ * pressure samples only). Measurement cycle completion may be signaled by a
+ * "sample ready" interrupt.
+ * Typical software sequence of operations :
+ * - get device out of low power mode,
+ * - setup hardware sampling period,
+ * - at end of period, upon data ready interrupt: pop pressure samples out of
+ * hardware FIFO and fetch temperature sample
+ * - when no longer needed, stop sampling process by putting device into
+ * low power mode.
+ * This mode is used to implement %INDIO_BUFFER_TRIGGERED mode if device tree
+ * declares a valid interrupt line. In this case, the internal hardware trigger
+ * drives acquisition.
+ *
+ * Note that hardware sampling frequency is taken into account only when
+ * internal hardware trigger is attached as the highest sampling rate seems to
+ * be the most energy efficient.
+ *
+ * TODO:
+ * preset pressure threshold crossing / IIO events ;
+ * differential pressure sampling ;
+ * hardware samples averaging.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/regulator/consumer.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include "zpa2326.h"
+
+/* 200 ms should be enough for the longest conversion time in one-shot mode. */
+#define ZPA2326_CONVERSION_JIFFIES (HZ / 5)
+
+/* There should be a 1 ms delay (Tpup) after getting out of reset. */
+#define ZPA2326_TPUP_USEC_MIN (1000)
+#define ZPA2326_TPUP_USEC_MAX (2000)
+
+/**
+ * struct zpa2326_frequency - Hardware sampling frequency descriptor
+ * @hz : Frequency in Hertz.
+ * @odr: Output Data Rate word as expected by %ZPA2326_CTRL_REG3_REG.
+ */
+struct zpa2326_frequency {
+ int hz;
+ u16 odr;
+};
+
+/*
+ * Keep these in strict ascending order: last array entry is expected to
+ * correspond to the highest sampling frequency.
+ */
+static const struct zpa2326_frequency zpa2326_sampling_frequencies[] = {
+ { .hz = 1, .odr = 1 << ZPA2326_CTRL_REG3_ODR_SHIFT },
+ { .hz = 5, .odr = 5 << ZPA2326_CTRL_REG3_ODR_SHIFT },
+ { .hz = 11, .odr = 6 << ZPA2326_CTRL_REG3_ODR_SHIFT },
+ { .hz = 23, .odr = 7 << ZPA2326_CTRL_REG3_ODR_SHIFT },
+};
+
+/* Return the highest hardware sampling frequency available. */
+static const struct zpa2326_frequency *zpa2326_highest_frequency(void)
+{
+ return &zpa2326_sampling_frequencies[
+ ARRAY_SIZE(zpa2326_sampling_frequencies) - 1];
+}
+
+/**
+ * struct zpa_private - Per-device internal private state
+ * @timestamp: Buffered samples ready datum.
+ * @regmap: Underlying I2C / SPI bus adapter used to abstract slave register
+ * accesses.
+ * @result: Allows sampling logic to get completion status of operations
+ * that interrupt handlers perform asynchronously.
+ * @data_ready: Interrupt handler uses this to wake user context up at sampling
+ * operation completion.
+ * @trigger: Optional hardware / interrupt driven trigger used to notify
+ * external devices a new sample is ready.
+ * @waken: Flag indicating whether or not device has just been powered on.
+ * @irq: Optional interrupt line: negative or zero if not declared into
+ * DT, in which case sampling logic keeps polling status register
+ * to detect completion.
+ * @frequency: Current hardware sampling frequency.
+ * @vref: Power / voltage reference.
+ * @vdd: Power supply.
+ */
+struct zpa2326_private {
+ s64 timestamp;
+ struct regmap *regmap;
+ int result;
+ struct completion data_ready;
+ struct iio_trigger *trigger;
+ bool waken;
+ int irq;
+ const struct zpa2326_frequency *frequency;
+ struct regulator *vref;
+ struct regulator *vdd;
+};
+
+#define zpa2326_err(_idev, _format, _arg...) \
+ dev_err(_idev->dev.parent, _format, ##_arg)
+
+#define zpa2326_warn(_idev, _format, _arg...) \
+ dev_warn(_idev->dev.parent, _format, ##_arg)
+
+#ifdef DEBUG
+#define zpa2326_dbg(_idev, _format, _arg...) \
+ dev_dbg(_idev->dev.parent, _format, ##_arg)
+#else
+#define zpa2326_dbg(_idev, _format, _arg...)
+#endif
+
+bool zpa2326_isreg_writeable(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case ZPA2326_REF_P_XL_REG:
+ case ZPA2326_REF_P_L_REG:
+ case ZPA2326_REF_P_H_REG:
+ case ZPA2326_RES_CONF_REG:
+ case ZPA2326_CTRL_REG0_REG:
+ case ZPA2326_CTRL_REG1_REG:
+ case ZPA2326_CTRL_REG2_REG:
+ case ZPA2326_CTRL_REG3_REG:
+ case ZPA2326_THS_P_LOW_REG:
+ case ZPA2326_THS_P_HIGH_REG:
+ return true;
+
+ default:
+ return false;
+ }
+}
+EXPORT_SYMBOL_GPL(zpa2326_isreg_writeable);
+
+bool zpa2326_isreg_readable(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case ZPA2326_REF_P_XL_REG:
+ case ZPA2326_REF_P_L_REG:
+ case ZPA2326_REF_P_H_REG:
+ case ZPA2326_DEVICE_ID_REG:
+ case ZPA2326_RES_CONF_REG:
+ case ZPA2326_CTRL_REG0_REG:
+ case ZPA2326_CTRL_REG1_REG:
+ case ZPA2326_CTRL_REG2_REG:
+ case ZPA2326_CTRL_REG3_REG:
+ case ZPA2326_INT_SOURCE_REG:
+ case ZPA2326_THS_P_LOW_REG:
+ case ZPA2326_THS_P_HIGH_REG:
+ case ZPA2326_STATUS_REG:
+ case ZPA2326_PRESS_OUT_XL_REG:
+ case ZPA2326_PRESS_OUT_L_REG:
+ case ZPA2326_PRESS_OUT_H_REG:
+ case ZPA2326_TEMP_OUT_L_REG:
+ case ZPA2326_TEMP_OUT_H_REG:
+ return true;
+
+ default:
+ return false;
+ }
+}
+EXPORT_SYMBOL_GPL(zpa2326_isreg_readable);
+
+bool zpa2326_isreg_precious(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case ZPA2326_INT_SOURCE_REG:
+ case ZPA2326_PRESS_OUT_H_REG:
+ return true;
+
+ default:
+ return false;
+ }
+}
+EXPORT_SYMBOL_GPL(zpa2326_isreg_precious);
+
+/**
+ * zpa2326_enable_device() - Enable device, i.e. get out of low power mode.
+ * @indio_dev: The IIO device associated with the hardware to enable.
+ *
+ * Required to access complete register space and to perform any sampling
+ * or control operations.
+ *
+ * Return: Zero when successful, a negative error code otherwise.
+ */
+static int zpa2326_enable_device(const struct iio_dev *indio_dev)
+{
+ int err;
+
+ err = regmap_write(((struct zpa2326_private *)
+ iio_priv(indio_dev))->regmap,
+ ZPA2326_CTRL_REG0_REG, ZPA2326_CTRL_REG0_ENABLE);
+ if (err) {
+ zpa2326_err(indio_dev, "failed to enable device (%d)", err);
+ return err;
+ }
+
+ zpa2326_dbg(indio_dev, "enabled");
+
+ return 0;
+}
+
+/**
+ * zpa2326_sleep() - Disable device, i.e. switch to low power mode.
+ * @indio_dev: The IIO device associated with the hardware to disable.
+ *
+ * Only %ZPA2326_DEVICE_ID_REG and %ZPA2326_CTRL_REG0_REG registers may be
+ * accessed once device is in the disabled state.
+ *
+ * Return: Zero when successful, a negative error code otherwise.
+ */
+static int zpa2326_sleep(const struct iio_dev *indio_dev)
+{
+ int err;
+
+ err = regmap_write(((struct zpa2326_private *)
+ iio_priv(indio_dev))->regmap,
+ ZPA2326_CTRL_REG0_REG, 0);
+ if (err) {
+ zpa2326_err(indio_dev, "failed to sleep (%d)", err);
+ return err;
+ }
+
+ zpa2326_dbg(indio_dev, "sleeping");
+
+ return 0;
+}
+
+/**
+ * zpa2326_reset_device() - Reset device to default hardware state.
+ * @indio_dev: The IIO device associated with the hardware to reset.
+ *
+ * Disable sampling and empty hardware FIFO.
+ * Device must be enabled before reset, i.e. not in low power mode.
+ *
+ * Return: Zero when successful, a negative error code otherwise.
+ */
+static int zpa2326_reset_device(const struct iio_dev *indio_dev)
+{
+ int err;
+
+ err = regmap_write(((struct zpa2326_private *)
+ iio_priv(indio_dev))->regmap,
+ ZPA2326_CTRL_REG2_REG, ZPA2326_CTRL_REG2_SWRESET);
+ if (err) {
+ zpa2326_err(indio_dev, "failed to reset device (%d)", err);
+ return err;
+ }
+
+ usleep_range(ZPA2326_TPUP_USEC_MIN, ZPA2326_TPUP_USEC_MAX);
+
+ zpa2326_dbg(indio_dev, "reset");
+
+ return 0;
+}
+
+/**
+ * zpa2326_start_oneshot() - Start a single sampling cycle, i.e. in one shot
+ * mode.
+ * @indio_dev: The IIO device associated with the sampling hardware.
+ *
+ * Device must have been previously enabled and configured for one shot mode.
+ * Device will be switched back to low power mode at end of cycle.
+ *
+ * Return: Zero when successful, a negative error code otherwise.
+ */
+static int zpa2326_start_oneshot(const struct iio_dev *indio_dev)
+{
+ int err;
+
+ err = regmap_write(((struct zpa2326_private *)
+ iio_priv(indio_dev))->regmap,
+ ZPA2326_CTRL_REG0_REG,
+ ZPA2326_CTRL_REG0_ENABLE |
+ ZPA2326_CTRL_REG0_ONE_SHOT);
+ if (err) {
+ zpa2326_err(indio_dev, "failed to start one shot cycle (%d)",
+ err);
+ return err;
+ }
+
+ zpa2326_dbg(indio_dev, "one shot cycle started");
+
+ return 0;
+}
+
+/**
+ * zpa2326_power_on() - Power on device to allow subsequent configuration.
+ * @indio_dev: The IIO device associated with the sampling hardware.
+ * @private: Internal private state related to @indio_dev.
+ *
+ * Sampling will be disabled, preventing strange things from happening in our
+ * back. Hardware FIFO content will be cleared.
+ * When successful, device will be left in the enabled state to allow further
+ * configuration.
+ *
+ * Return: Zero when successful, a negative error code otherwise.
+ */
+static int zpa2326_power_on(const struct iio_dev *indio_dev,
+ const struct zpa2326_private *private)
+{
+ int err;
+
+ err = regulator_enable(private->vref);
+ if (err)
+ return err;
+
+ err = regulator_enable(private->vdd);
+ if (err)
+ goto vref;
+
+ zpa2326_dbg(indio_dev, "powered on");
+
+ err = zpa2326_enable_device(indio_dev);
+ if (err)
+ goto vdd;
+
+ err = zpa2326_reset_device(indio_dev);
+ if (err)
+ goto sleep;
+
+ return 0;
+
+sleep:
+ zpa2326_sleep(indio_dev);
+vdd:
+ regulator_disable(private->vdd);
+vref:
+ regulator_disable(private->vref);
+
+ zpa2326_dbg(indio_dev, "powered off");
+
+ return err;
+}
+
+/**
+ * zpa2326_power_off() - Power off device, i.e. disable attached power
+ * regulators.
+ * @indio_dev: The IIO device associated with the sampling hardware.
+ * @private: Internal private state related to @indio_dev.
+ *
+ * Return: Zero when successful, a negative error code otherwise.
+ */
+static void zpa2326_power_off(const struct iio_dev *indio_dev,
+ const struct zpa2326_private *private)
+{
+ regulator_disable(private->vdd);
+ regulator_disable(private->vref);
+
+ zpa2326_dbg(indio_dev, "powered off");
+}
+
+/**
+ * zpa2326_config_oneshot() - Setup device for one shot / on demand mode.
+ * @indio_dev: The IIO device associated with the sampling hardware.
+ * @irq: Optional interrupt line the hardware uses to notify new data
+ * samples are ready. Negative or zero values indicate no interrupts
+ * are available, meaning polling is required.
+ *
+ * Output Data Rate is configured for the highest possible rate so that
+ * conversion time and power consumption are reduced to a minimum.
+ * Note that hardware internal averaging machinery (not implemented in this
+ * driver) is not applicable in this mode.
+ *
+ * Device must have been previously enabled before calling
+ * zpa2326_config_oneshot().
+ *
+ * Return: Zero when successful, a negative error code otherwise.
+ */
+static int zpa2326_config_oneshot(const struct iio_dev *indio_dev,
+ int irq)
+{
+ struct regmap *regs = ((struct zpa2326_private *)
+ iio_priv(indio_dev))->regmap;
+ const struct zpa2326_frequency *freq = zpa2326_highest_frequency();
+ int err;
+
+ /* Setup highest available Output Data Rate for one shot mode. */
+ err = regmap_write(regs, ZPA2326_CTRL_REG3_REG, freq->odr);
+ if (err)
+ return err;
+
+ if (irq > 0) {
+ /* Request interrupt when new sample is available. */
+ err = regmap_write(regs, ZPA2326_CTRL_REG1_REG,
+ (u8)~ZPA2326_CTRL_REG1_MASK_DATA_READY);
+
+ if (err) {
+ dev_err(indio_dev->dev.parent,
+ "failed to setup one shot mode (%d)", err);
+ return err;
+ }
+ }
+
+ zpa2326_dbg(indio_dev, "one shot mode setup @%dHz", freq->hz);
+
+ return 0;
+}
+
+/**
+ * zpa2326_clear_fifo() - Clear remaining entries in hardware FIFO.
+ * @indio_dev: The IIO device associated with the sampling hardware.
+ * @min_count: Number of samples present within hardware FIFO.
+ *
+ * @min_count argument is a hint corresponding to the known minimum number of
+ * samples currently living in the FIFO. This allows to reduce the number of bus
+ * accesses by skipping status register read operation as long as we know for
+ * sure there are still entries left.
+ *
+ * Return: Zero when successful, a negative error code otherwise.
+ */
+static int zpa2326_clear_fifo(const struct iio_dev *indio_dev,
+ unsigned int min_count)
+{
+ struct regmap *regs = ((struct zpa2326_private *)
+ iio_priv(indio_dev))->regmap;
+ int err;
+ unsigned int val;
+
+ if (!min_count) {
+ /*
+ * No hint: read status register to determine whether FIFO is
+ * empty or not.
+ */
+ err = regmap_read(regs, ZPA2326_STATUS_REG, &val);
+
+ if (err < 0)
+ goto err;
+
+ if (val & ZPA2326_STATUS_FIFO_E)
+ /* Fifo is empty: nothing to trash. */
+ return 0;
+ }
+
+ /* Clear FIFO. */
+ do {
+ /*
+ * A single fetch from pressure MSB register is enough to pop
+ * values out of FIFO.
+ */
+ err = regmap_read(regs, ZPA2326_PRESS_OUT_H_REG, &val);
+ if (err < 0)
+ goto err;
+
+ if (min_count) {
+ /*
+ * We know for sure there are at least min_count entries
+ * left in FIFO. Skip status register read.
+ */
+ min_count--;
+ continue;
+ }
+
+ err = regmap_read(regs, ZPA2326_STATUS_REG, &val);
+ if (err < 0)
+ goto err;
+
+ } while (!(val & ZPA2326_STATUS_FIFO_E));
+
+ zpa2326_dbg(indio_dev, "FIFO cleared");
+
+ return 0;
+
+err:
+ zpa2326_err(indio_dev, "failed to clear FIFO (%d)", err);
+
+ return err;
+}
+
+/**
+ * zpa2326_dequeue_pressure() - Retrieve the most recent pressure sample from
+ * hardware FIFO.
+ * @indio_dev: The IIO device associated with the sampling hardware.
+ * @pressure: Sampled pressure output.
+ *
+ * Note that ZPA2326 hardware FIFO stores pressure samples only.
+ *
+ * Return: Zero when successful, a negative error code otherwise.
+ */
+static int zpa2326_dequeue_pressure(const struct iio_dev *indio_dev,
+ u32 *pressure)
+{
+ struct regmap *regs = ((struct zpa2326_private *)
+ iio_priv(indio_dev))->regmap;
+ unsigned int val;
+ int err;
+ int cleared = -1;
+
+ err = regmap_read(regs, ZPA2326_STATUS_REG, &val);
+ if (err < 0)
+ return err;
+
+ *pressure = 0;
+
+ if (val & ZPA2326_STATUS_P_OR) {
+ /*
+ * Fifo overrun : first sample dequeued from FIFO is the
+ * newest.
+ */
+ zpa2326_warn(indio_dev, "FIFO overflow");
+
+ err = regmap_bulk_read(regs, ZPA2326_PRESS_OUT_XL_REG, pressure,
+ 3);
+ if (err)
+ return err;
+
+#define ZPA2326_FIFO_DEPTH (16U)
+ /* Hardware FIFO may hold no more than 16 pressure samples. */
+ return zpa2326_clear_fifo(indio_dev, ZPA2326_FIFO_DEPTH - 1);
+ }
+
+ /*
+ * Fifo has not overflown : retrieve newest sample. We need to pop
+ * values out until FIFO is empty : last fetched pressure is the newest.
+ * In nominal cases, we should find a single queued sample only.
+ */
+ do {
+ err = regmap_bulk_read(regs, ZPA2326_PRESS_OUT_XL_REG, pressure,
+ 3);
+ if (err)
+ return err;
+
+ err = regmap_read(regs, ZPA2326_STATUS_REG, &val);
+ if (err < 0)
+ return err;
+
+ cleared++;
+ } while (!(val & ZPA2326_STATUS_FIFO_E));
+
+ if (cleared)
+ /*
+ * Samples were pushed by hardware during previous rounds but we
+ * didn't consume them fast enough: inform user.
+ */
+ zpa2326_dbg(indio_dev, "cleared %d FIFO entries", cleared);
+
+ return 0;
+}
+
+/**
+ * zpa2326_fill_sample_buffer() - Enqueue new channel samples to IIO buffer.
+ * @indio_dev: The IIO device associated with the sampling hardware.
+ * @private: Internal private state related to @indio_dev.
+ *
+ * Return: Zero when successful, a negative error code otherwise.
+ */
+static int zpa2326_fill_sample_buffer(struct iio_dev *indio_dev,
+ const struct zpa2326_private *private)
+{
+ struct {
+ u32 pressure;
+ u16 temperature;
+ u64 timestamp;
+ } sample;
+ int err;
+
+ if (test_bit(0, indio_dev->active_scan_mask)) {
+ /* Get current pressure from hardware FIFO. */
+ err = zpa2326_dequeue_pressure(indio_dev, &sample.pressure);
+ if (err) {
+ zpa2326_warn(indio_dev, "failed to fetch pressure (%d)",
+ err);
+ return err;
+ }
+ }
+
+ if (test_bit(1, indio_dev->active_scan_mask)) {
+ /* Get current temperature. */
+ err = regmap_bulk_read(private->regmap, ZPA2326_TEMP_OUT_L_REG,
+ &sample.temperature, 2);
+ if (err) {
+ zpa2326_warn(indio_dev,
+ "failed to fetch temperature (%d)", err);
+ return err;
+ }
+ }
+
+ /*
+ * Now push samples using timestamp stored either :
+ * - by hardware interrupt handler if interrupt is available: see
+ * zpa2326_handle_irq(),
+ * - or oneshot completion polling machinery : see
+ * zpa2326_trigger_handler().
+ */
+ zpa2326_dbg(indio_dev, "filling raw samples buffer");
+
+ iio_push_to_buffers_with_timestamp(indio_dev, &sample,
+ private->timestamp);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int zpa2326_runtime_suspend(struct device *parent)
+{
+ const struct iio_dev *indio_dev = dev_get_drvdata(parent);
+
+ if (pm_runtime_autosuspend_expiration(parent))
+ /* Userspace changed autosuspend delay. */
+ return -EAGAIN;
+
+ zpa2326_power_off(indio_dev, iio_priv(indio_dev));
+
+ return 0;
+}
+
+static int zpa2326_runtime_resume(struct device *parent)
+{
+ const struct iio_dev *indio_dev = dev_get_drvdata(parent);
+
+ return zpa2326_power_on(indio_dev, iio_priv(indio_dev));
+}
+
+const struct dev_pm_ops zpa2326_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
+ SET_RUNTIME_PM_OPS(zpa2326_runtime_suspend, zpa2326_runtime_resume,
+ NULL)
+};
+EXPORT_SYMBOL_GPL(zpa2326_pm_ops);
+
+/**
+ * zpa2326_resume() - Request the PM layer to power supply the device.
+ * @indio_dev: The IIO device associated with the sampling hardware.
+ *
+ * Return:
+ * < 0 - a negative error code meaning failure ;
+ * 0 - success, device has just been powered up ;
+ * 1 - success, device was already powered.
+ */
+static int zpa2326_resume(const struct iio_dev *indio_dev)
+{
+ int err;
+
+ err = pm_runtime_get_sync(indio_dev->dev.parent);
+ if (err < 0)
+ return err;
+
+ if (err > 0) {
+ /*
+ * Device was already power supplied: get it out of low power
+ * mode and inform caller.
+ */
+ zpa2326_enable_device(indio_dev);
+ return 1;
+ }
+
+ /* Inform caller device has just been brought back to life. */
+ return 0;
+}
+
+/**
+ * zpa2326_suspend() - Schedule a power down using autosuspend feature of PM
+ * layer.
+ * @indio_dev: The IIO device associated with the sampling hardware.
+ *
+ * Device is switched to low power mode at first to save power even when
+ * attached regulator is a "dummy" one.
+ */
+static void zpa2326_suspend(struct iio_dev *indio_dev)
+{
+ struct device *parent = indio_dev->dev.parent;
+
+ zpa2326_sleep(indio_dev);
+
+ pm_runtime_mark_last_busy(parent);
+ pm_runtime_put_autosuspend(parent);
+}
+
+static void zpa2326_init_runtime(struct device *parent)
+{
+ pm_runtime_get_noresume(parent);
+ pm_runtime_set_active(parent);
+ pm_runtime_enable(parent);
+ pm_runtime_set_autosuspend_delay(parent, 1000);
+ pm_runtime_use_autosuspend(parent);
+ pm_runtime_mark_last_busy(parent);
+ pm_runtime_put_autosuspend(parent);
+}
+
+static void zpa2326_fini_runtime(struct device *parent)
+{
+ pm_runtime_disable(parent);
+ pm_runtime_set_suspended(parent);
+}
+#else /* !CONFIG_PM */
+static int zpa2326_resume(const struct iio_dev *indio_dev)
+{
+ zpa2326_enable_device(indio_dev);
+
+ return 0;
+}
+
+static void zpa2326_suspend(struct iio_dev *indio_dev)
+{
+ zpa2326_sleep(indio_dev);
+}
+
+#define zpa2326_init_runtime(_parent)
+#define zpa2326_fini_runtime(_parent)
+#endif /* !CONFIG_PM */
+
+/**
+ * zpa2326_handle_irq() - Process hardware interrupts.
+ * @irq: Interrupt line the hardware uses to notify new data has arrived.
+ * @data: The IIO device associated with the sampling hardware.
+ *
+ * Timestamp buffered samples as soon as possible then schedule threaded bottom
+ * half.
+ *
+ * Return: Always successful.
+ */
+static irqreturn_t zpa2326_handle_irq(int irq, void *data)
+{
+ struct iio_dev *indio_dev = (struct iio_dev *)data;
+
+ if (iio_buffer_enabled(indio_dev)) {
+ /* Timestamping needed for buffered sampling only. */
+ ((struct zpa2326_private *)
+ iio_priv(indio_dev))->timestamp = iio_get_time_ns(indio_dev);
+ }
+
+ return IRQ_WAKE_THREAD;
+}
+
+/**
+ * zpa2326_handle_threaded_irq() - Interrupt bottom-half handler.
+ * @irq: Interrupt line the hardware uses to notify new data has arrived.
+ * @data: The IIO device associated with the sampling hardware.
+ *
+ * Mainly ensures interrupt is caused by a real "new sample available"
+ * condition. This relies upon the ability to perform blocking / sleeping bus
+ * accesses to slave's registers. This is why zpa2326_handle_threaded_irq() is
+ * called from within a thread, i.e. not called from hard interrupt context.
+ *
+ * When device is using its own internal hardware trigger in continuous sampling
+ * mode, data are available into hardware FIFO once interrupt has occurred. All
+ * we have to do is to dispatch the trigger, which in turn will fetch data and
+ * fill IIO buffer.
+ *
+ * When not using its own internal hardware trigger, the device has been
+ * configured in one-shot mode either by an external trigger or the IIO read_raw
+ * hook. This means one of the latter is currently waiting for sampling
+ * completion, in which case we must simply wake it up.
+ *
+ * See zpa2326_trigger_handler().
+ *
+ * Return:
+ * %IRQ_NONE - no consistent interrupt happened ;
+ * %IRQ_HANDLED - there was new samples available.
+ */
+static irqreturn_t zpa2326_handle_threaded_irq(int irq, void *data)
+{
+ struct iio_dev *indio_dev = (struct iio_dev *)data;
+ struct zpa2326_private *priv = iio_priv(indio_dev);
+ unsigned int val;
+ bool cont;
+ irqreturn_t ret = IRQ_NONE;
+
+ /*
+ * Are we using our own internal trigger in triggered buffer mode, i.e.,
+ * currently working in continuous sampling mode ?
+ */
+ cont = (iio_buffer_enabled(indio_dev) &&
+ iio_trigger_using_own(indio_dev));
+
+ /*
+ * Device works according to a level interrupt scheme: reading interrupt
+ * status de-asserts interrupt line.
+ */
+ priv->result = regmap_read(priv->regmap, ZPA2326_INT_SOURCE_REG, &val);
+ if (priv->result < 0) {
+ if (cont)
+ return IRQ_NONE;
+
+ goto complete;
+ }
+
+ /* Data ready is the only interrupt source we requested. */
+ if (!(val & ZPA2326_INT_SOURCE_DATA_READY)) {
+ /*
+ * Interrupt happened but no new sample available: likely caused
+ * by spurious interrupts, in which case, returning IRQ_NONE
+ * allows to benefit from the generic spurious interrupts
+ * handling.
+ */
+ zpa2326_warn(indio_dev, "unexpected interrupt status %02x",
+ val);
+
+ if (cont)
+ return IRQ_NONE;
+
+ priv->result = -ENODATA;
+ goto complete;
+ }
+
+ /* New sample available: dispatch internal trigger consumers. */
+ iio_trigger_poll_chained(priv->trigger);
+
+ if (cont)
+ /*
+ * Internal hardware trigger has been scheduled above : it will
+ * fetch data on its own.
+ */
+ return IRQ_HANDLED;
+
+ ret = IRQ_HANDLED;
+
+complete:
+ /*
+ * Wake up direct or externaly triggered buffer mode waiters: see
+ * zpa2326_sample_oneshot() and zpa2326_trigger_handler().
+ */
+ complete(&priv->data_ready);
+
+ return ret;
+}
+
+/**
+ * zpa2326_wait_oneshot_completion() - Wait for oneshot data ready interrupt.
+ * @indio_dev: The IIO device associated with the sampling hardware.
+ * @private: Internal private state related to @indio_dev.
+ *
+ * Return: Zero when successful, a negative error code otherwise.
+ */
+static int zpa2326_wait_oneshot_completion(const struct iio_dev *indio_dev,
+ struct zpa2326_private *private)
+{
+ int ret;
+ unsigned int val;
+
+ zpa2326_dbg(indio_dev, "waiting for one shot completion interrupt");
+
+ ret = wait_for_completion_interruptible_timeout(
+ &private->data_ready, ZPA2326_CONVERSION_JIFFIES);
+ if (ret > 0)
+ /*
+ * Interrupt handler completed before timeout: return operation
+ * status.
+ */
+ return private->result;
+
+ /* Clear all interrupts just to be sure. */
+ regmap_read(private->regmap, ZPA2326_INT_SOURCE_REG, &val);
+
+ if (!ret)
+ /* Timed out. */
+ ret = -ETIME;
+
+ if (ret != -ERESTARTSYS)
+ zpa2326_warn(indio_dev, "no one shot interrupt occurred (%d)",
+ ret);
+
+ return ret;
+}
+
+static int zpa2326_init_managed_irq(struct device *parent,
+ struct iio_dev *indio_dev,
+ struct zpa2326_private *private,
+ int irq)
+{
+ int err;
+
+ private->irq = irq;
+
+ if (irq <= 0) {
+ /*
+ * Platform declared no interrupt line: device will be polled
+ * for data availability.
+ */
+ dev_info(parent, "no interrupt found, running in polling mode");
+ return 0;
+ }
+
+ init_completion(&private->data_ready);
+
+ /* Request handler to be scheduled into threaded interrupt context. */
+ err = devm_request_threaded_irq(parent, irq, zpa2326_handle_irq,
+ zpa2326_handle_threaded_irq,
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ dev_name(parent), indio_dev);
+ if (err) {
+ dev_err(parent, "failed to request interrupt %d (%d)", irq,
+ err);
+ return err;
+ }
+
+ dev_info(parent, "using interrupt %d", irq);
+
+ return 0;
+}
+
+/**
+ * zpa2326_poll_oneshot_completion() - Actively poll for one shot data ready.
+ * @indio_dev: The IIO device associated with the sampling hardware.
+ *
+ * Loop over registers content to detect end of sampling cycle. Used when DT
+ * declared no valid interrupt lines.
+ *
+ * Return: Zero when successful, a negative error code otherwise.
+ */
+static int zpa2326_poll_oneshot_completion(const struct iio_dev *indio_dev)
+{
+ unsigned long tmout = jiffies + ZPA2326_CONVERSION_JIFFIES;
+ struct regmap *regs = ((struct zpa2326_private *)
+ iio_priv(indio_dev))->regmap;
+ unsigned int val;
+ int err;
+
+ zpa2326_dbg(indio_dev, "polling for one shot completion");
+
+ /*
+ * At least, 100 ms is needed for the device to complete its one-shot
+ * cycle.
+ */
+ if (msleep_interruptible(100))
+ return -ERESTARTSYS;
+
+ /* Poll for conversion completion in hardware. */
+ while (true) {
+ err = regmap_read(regs, ZPA2326_CTRL_REG0_REG, &val);
+ if (err < 0)
+ goto err;
+
+ if (!(val & ZPA2326_CTRL_REG0_ONE_SHOT))
+ /* One-shot bit self clears at conversion end. */
+ break;
+
+ if (time_after(jiffies, tmout)) {
+ /* Prevent from waiting forever : let's time out. */
+ err = -ETIME;
+ goto err;
+ }
+
+ usleep_range(10000, 20000);
+ }
+
+ /*
+ * In oneshot mode, pressure sample availability guarantees that
+ * temperature conversion has also completed : just check pressure
+ * status bit to keep things simple.
+ */
+ err = regmap_read(regs, ZPA2326_STATUS_REG, &val);
+ if (err < 0)
+ goto err;
+
+ if (!(val & ZPA2326_STATUS_P_DA)) {
+ /* No sample available. */
+ err = -ENODATA;
+ goto err;
+ }
+
+ return 0;
+
+err:
+ zpa2326_warn(indio_dev, "failed to poll one shot completion (%d)", err);
+
+ return err;
+}
+
+/**
+ * zpa2326_fetch_raw_sample() - Retrieve a raw sample and convert it to CPU
+ * endianness.
+ * @indio_dev: The IIO device associated with the sampling hardware.
+ * @type: Type of measurement / channel to fetch from.
+ * @value: Sample output.
+ *
+ * Return: Zero when successful, a negative error code otherwise.
+ */
+static int zpa2326_fetch_raw_sample(const struct iio_dev *indio_dev,
+ enum iio_chan_type type,
+ int *value)
+{
+ struct regmap *regs = ((struct zpa2326_private *)
+ iio_priv(indio_dev))->regmap;
+ int err;
+
+ switch (type) {
+ case IIO_PRESSURE:
+ zpa2326_dbg(indio_dev, "fetching raw pressure sample");
+
+ err = regmap_bulk_read(regs, ZPA2326_PRESS_OUT_XL_REG, value,
+ 3);
+ if (err) {
+ zpa2326_warn(indio_dev, "failed to fetch pressure (%d)",
+ err);
+ return err;
+ }
+
+ /* Pressure is a 24 bits wide little-endian unsigned int. */
+ *value = (((u8 *)value)[2] << 16) | (((u8 *)value)[1] << 8) |
+ ((u8 *)value)[0];
+
+ return IIO_VAL_INT;
+
+ case IIO_TEMP:
+ zpa2326_dbg(indio_dev, "fetching raw temperature sample");
+
+ err = regmap_bulk_read(regs, ZPA2326_TEMP_OUT_L_REG, value, 2);
+ if (err) {
+ zpa2326_warn(indio_dev,
+ "failed to fetch temperature (%d)", err);
+ return err;
+ }
+
+ /* Temperature is a 16 bits wide little-endian signed int. */
+ *value = (int)le16_to_cpup((__le16 *)value);
+
+ return IIO_VAL_INT;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+/**
+ * zpa2326_sample_oneshot() - Perform a complete one shot sampling cycle.
+ * @indio_dev: The IIO device associated with the sampling hardware.
+ * @type: Type of measurement / channel to fetch from.
+ * @value: Sample output.
+ *
+ * Return: Zero when successful, a negative error code otherwise.
+ */
+static int zpa2326_sample_oneshot(struct iio_dev *indio_dev,
+ enum iio_chan_type type,
+ int *value)
+{
+ int ret;
+ struct zpa2326_private *priv;
+
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
+
+ ret = zpa2326_resume(indio_dev);
+ if (ret < 0)
+ goto release;
+
+ priv = iio_priv(indio_dev);
+
+ if (ret > 0) {
+ /*
+ * We were already power supplied. Just clear hardware FIFO to
+ * get rid of samples acquired during previous rounds (if any).
+ * Sampling operation always generates both temperature and
+ * pressure samples. The latter are always enqueued into
+ * hardware FIFO. This may lead to situations were pressure
+ * samples still sit into FIFO when previous cycle(s) fetched
+ * temperature data only.
+ * Hence, we need to clear hardware FIFO content to prevent from
+ * getting outdated values at the end of current cycle.
+ */
+ if (type == IIO_PRESSURE) {
+ ret = zpa2326_clear_fifo(indio_dev, 0);
+ if (ret)
+ goto suspend;
+ }
+ } else {
+ /*
+ * We have just been power supplied, i.e. device is in default
+ * "out of reset" state, meaning we need to reconfigure it
+ * entirely.
+ */
+ ret = zpa2326_config_oneshot(indio_dev, priv->irq);
+ if (ret)
+ goto suspend;
+ }
+
+ /* Start a sampling cycle in oneshot mode. */
+ ret = zpa2326_start_oneshot(indio_dev);
+ if (ret)
+ goto suspend;
+
+ /* Wait for sampling cycle to complete. */
+ if (priv->irq > 0)
+ ret = zpa2326_wait_oneshot_completion(indio_dev, priv);
+ else
+ ret = zpa2326_poll_oneshot_completion(indio_dev);
+
+ if (ret)
+ goto suspend;
+
+ /* Retrieve raw sample value and convert it to CPU endianness. */
+ ret = zpa2326_fetch_raw_sample(indio_dev, type, value);
+
+suspend:
+ zpa2326_suspend(indio_dev);
+release:
+ iio_device_release_direct_mode(indio_dev);
+
+ return ret;
+}
+
+/**
+ * zpa2326_trigger_handler() - Perform an IIO buffered sampling round in one
+ * shot mode.
+ * @irq: The software interrupt assigned to @data
+ * @data: The IIO poll function dispatched by external trigger our device is
+ * attached to.
+ *
+ * Bottom-half handler called by the IIO trigger to which our device is
+ * currently attached. Allows us to synchronize this device buffered sampling
+ * either with external events (such as timer expiration, external device sample
+ * ready, etc...) or with its own interrupt (internal hardware trigger).
+ *
+ * When using an external trigger, basically run the same sequence of operations
+ * as for zpa2326_sample_oneshot() with the following hereafter. Hardware FIFO
+ * is not cleared since already done at buffering enable time and samples
+ * dequeueing always retrieves the most recent value.
+ *
+ * Otherwise, when internal hardware trigger has dispatched us, just fetch data
+ * from hardware FIFO.
+ *
+ * Fetched data will pushed unprocessed to IIO buffer since samples conversion
+ * is delegated to userspace in buffered mode (endianness, etc...).
+ *
+ * Return:
+ * %IRQ_NONE - no consistent interrupt happened ;
+ * %IRQ_HANDLED - there was new samples available.
+ */
+static irqreturn_t zpa2326_trigger_handler(int irq, void *data)
+{
+ struct iio_dev *indio_dev = ((struct iio_poll_func *)
+ data)->indio_dev;
+ struct zpa2326_private *priv = iio_priv(indio_dev);
+ bool cont;
+
+ /*
+ * We have been dispatched, meaning we are in triggered buffer mode.
+ * Using our own internal trigger implies we are currently in continuous
+ * hardware sampling mode.
+ */
+ cont = iio_trigger_using_own(indio_dev);
+
+ if (!cont) {
+ /* On demand sampling : start a one shot cycle. */
+ if (zpa2326_start_oneshot(indio_dev))
+ goto out;
+
+ /* Wait for sampling cycle to complete. */
+ if (priv->irq <= 0) {
+ /* No interrupt available: poll for completion. */
+ if (zpa2326_poll_oneshot_completion(indio_dev))
+ goto out;
+
+ /* Only timestamp sample once it is ready. */
+ priv->timestamp = iio_get_time_ns(indio_dev);
+ } else {
+ /* Interrupt handlers will timestamp for us. */
+ if (zpa2326_wait_oneshot_completion(indio_dev, priv))
+ goto out;
+ }
+ }
+
+ /* Enqueue to IIO buffer / userspace. */
+ zpa2326_fill_sample_buffer(indio_dev, priv);
+
+out:
+ if (!cont)
+ /* Don't switch to low power if sampling continuously. */
+ zpa2326_sleep(indio_dev);
+
+ /* Inform attached trigger we are done. */
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * zpa2326_preenable_buffer() - Prepare device for configuring triggered
+ * sampling
+ * modes.
+ * @indio_dev: The IIO device associated with the sampling hardware.
+ *
+ * Basically power up device.
+ * Called with IIO device's lock held.
+ *
+ * Return: Zero when successful, a negative error code otherwise.
+ */
+static int zpa2326_preenable_buffer(struct iio_dev *indio_dev)
+{
+ int ret = zpa2326_resume(indio_dev);
+
+ if (ret < 0)
+ return ret;
+
+ /* Tell zpa2326_postenable_buffer() if we have just been powered on. */
+ ((struct zpa2326_private *)
+ iio_priv(indio_dev))->waken = iio_priv(indio_dev);
+
+ return 0;
+}
+
+/**
+ * zpa2326_postenable_buffer() - Configure device for triggered sampling.
+ * @indio_dev: The IIO device associated with the sampling hardware.
+ *
+ * Basically setup one-shot mode if plugging external trigger.
+ * Otherwise, let internal trigger configure continuous sampling :
+ * see zpa2326_set_trigger_state().
+ *
+ * If an error is returned, IIO layer will call our postdisable hook for us,
+ * i.e. no need to explicitly power device off here.
+ * Called with IIO device's lock held.
+ *
+ * Called with IIO device's lock held.
+ *
+ * Return: Zero when successful, a negative error code otherwise.
+ */
+static int zpa2326_postenable_buffer(struct iio_dev *indio_dev)
+{
+ const struct zpa2326_private *priv = iio_priv(indio_dev);
+ int err;
+
+ if (!priv->waken) {
+ /*
+ * We were already power supplied. Just clear hardware FIFO to
+ * get rid of samples acquired during previous rounds (if any).
+ */
+ err = zpa2326_clear_fifo(indio_dev, 0);
+ if (err)
+ goto err;
+ }
+
+ if (!iio_trigger_using_own(indio_dev) && priv->waken) {
+ /*
+ * We are using an external trigger and we have just been
+ * powered up: reconfigure one-shot mode.
+ */
+ err = zpa2326_config_oneshot(indio_dev, priv->irq);
+ if (err)
+ goto err;
+ }
+
+ /* Plug our own trigger event handler. */
+ err = iio_triggered_buffer_postenable(indio_dev);
+ if (err)
+ goto err;
+
+ return 0;
+
+err:
+ zpa2326_err(indio_dev, "failed to enable buffering (%d)", err);
+
+ return err;
+}
+
+static int zpa2326_postdisable_buffer(struct iio_dev *indio_dev)
+{
+ zpa2326_suspend(indio_dev);
+
+ return 0;
+}
+
+static const struct iio_buffer_setup_ops zpa2326_buffer_setup_ops = {
+ .preenable = zpa2326_preenable_buffer,
+ .postenable = zpa2326_postenable_buffer,
+ .predisable = iio_triggered_buffer_predisable,
+ .postdisable = zpa2326_postdisable_buffer
+};
+
+/**
+ * zpa2326_set_trigger_state() - Start / stop continuous sampling.
+ * @trig: The trigger being attached to IIO device associated with the sampling
+ * hardware.
+ * @state: Tell whether to start (true) or stop (false)
+ *
+ * Basically enable / disable hardware continuous sampling mode.
+ *
+ * Called with IIO device's lock held at postenable() or predisable() time.
+ *
+ * Return: Zero when successful, a negative error code otherwise.
+ */
+static int zpa2326_set_trigger_state(struct iio_trigger *trig, bool state)
+{
+ const struct iio_dev *indio_dev = dev_get_drvdata(
+ trig->dev.parent);
+ const struct zpa2326_private *priv = iio_priv(indio_dev);
+ int err;
+
+ if (!state) {
+ /*
+ * Switch trigger off : in case of failure, interrupt is left
+ * disabled in order to prevent handler from accessing released
+ * resources.
+ */
+ unsigned int val;
+
+ /*
+ * As device is working in continuous mode, handlers may be
+ * accessing resources we are currently freeing...
+ * Prevent this by disabling interrupt handlers and ensure
+ * the device will generate no more interrupts unless explicitly
+ * required to, i.e. by restoring back to default one shot mode.
+ */
+ disable_irq(priv->irq);
+
+ /*
+ * Disable continuous sampling mode to restore settings for
+ * one shot / direct sampling operations.
+ */
+ err = regmap_write(priv->regmap, ZPA2326_CTRL_REG3_REG,
+ zpa2326_highest_frequency()->odr);
+ if (err)
+ return err;
+
+ /*
+ * Now that device won't generate interrupts on its own,
+ * acknowledge any currently active interrupts (may happen on
+ * rare occasions while stopping continuous mode).
+ */
+ err = regmap_read(priv->regmap, ZPA2326_INT_SOURCE_REG, &val);
+ if (err < 0)
+ return err;
+
+ /*
+ * Re-enable interrupts only if we can guarantee the device will
+ * generate no more interrupts to prevent handlers from
+ * accessing released resources.
+ */
+ enable_irq(priv->irq);
+
+ zpa2326_dbg(indio_dev, "continuous mode stopped");
+ } else {
+ /*
+ * Switch trigger on : start continuous sampling at required
+ * frequency.
+ */
+
+ if (priv->waken) {
+ /* Enable interrupt if getting out of reset. */
+ err = regmap_write(priv->regmap, ZPA2326_CTRL_REG1_REG,
+ (u8)
+ ~ZPA2326_CTRL_REG1_MASK_DATA_READY);
+ if (err)
+ return err;
+ }
+
+ /* Enable continuous sampling at specified frequency. */
+ err = regmap_write(priv->regmap, ZPA2326_CTRL_REG3_REG,
+ ZPA2326_CTRL_REG3_ENABLE_MEAS |
+ priv->frequency->odr);
+ if (err)
+ return err;
+
+ zpa2326_dbg(indio_dev, "continuous mode setup @%dHz",
+ priv->frequency->hz);
+ }
+
+ return 0;
+}
+
+static const struct iio_trigger_ops zpa2326_trigger_ops = {
+ .owner = THIS_MODULE,
+ .set_trigger_state = zpa2326_set_trigger_state,
+};
+
+/**
+ * zpa2326_init_trigger() - Create an interrupt driven / hardware trigger
+ * allowing to notify external devices a new sample is
+ * ready.
+ * @parent: Hardware sampling device @indio_dev is a child of.
+ * @indio_dev: The IIO device associated with the sampling hardware.
+ * @private: Internal private state related to @indio_dev.
+ * @irq: Optional interrupt line the hardware uses to notify new data
+ * samples are ready. Negative or zero values indicate no interrupts
+ * are available, meaning polling is required.
+ *
+ * Only relevant when DT declares a valid interrupt line.
+ *
+ * Return: Zero when successful, a negative error code otherwise.
+ */
+static int zpa2326_init_managed_trigger(struct device *parent,
+ struct iio_dev *indio_dev,
+ struct zpa2326_private *private,
+ int irq)
+{
+ struct iio_trigger *trigger;
+ int ret;
+
+ if (irq <= 0)
+ return 0;
+
+ trigger = devm_iio_trigger_alloc(parent, "%s-dev%d",
+ indio_dev->name, indio_dev->id);
+ if (!trigger)
+ return -ENOMEM;
+
+ /* Basic setup. */
+ trigger->dev.parent = parent;
+ trigger->ops = &zpa2326_trigger_ops;
+
+ private->trigger = trigger;
+
+ /* Register to triggers space. */
+ ret = devm_iio_trigger_register(parent, trigger);
+ if (ret)
+ dev_err(parent, "failed to register hardware trigger (%d)",
+ ret);
+
+ return ret;
+}
+
+static int zpa2326_get_frequency(const struct iio_dev *indio_dev)
+{
+ return ((struct zpa2326_private *)iio_priv(indio_dev))->frequency->hz;
+}
+
+static int zpa2326_set_frequency(struct iio_dev *indio_dev, int hz)
+{
+ struct zpa2326_private *priv = iio_priv(indio_dev);
+ int freq;
+ int err;
+
+ /* Check if requested frequency is supported. */
+ for (freq = 0; freq < ARRAY_SIZE(zpa2326_sampling_frequencies); freq++)
+ if (zpa2326_sampling_frequencies[freq].hz == hz)
+ break;
+ if (freq == ARRAY_SIZE(zpa2326_sampling_frequencies))
+ return -EINVAL;
+
+ /* Don't allow changing frequency if buffered sampling is ongoing. */
+ err = iio_device_claim_direct_mode(indio_dev);
+ if (err)
+ return err;
+
+ priv->frequency = &zpa2326_sampling_frequencies[freq];
+
+ iio_device_release_direct_mode(indio_dev);
+
+ return 0;
+}
+
+/* Expose supported hardware sampling frequencies (Hz) through sysfs. */
+static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("1 5 11 23");
+
+static struct attribute *zpa2326_attributes[] = {
+ &iio_const_attr_sampling_frequency_available.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group zpa2326_attribute_group = {
+ .attrs = zpa2326_attributes,
+};
+
+static int zpa2326_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val,
+ int *val2,
+ long mask)
+{
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ return zpa2326_sample_oneshot(indio_dev, chan->type, val);
+
+ case IIO_CHAN_INFO_SCALE:
+ switch (chan->type) {
+ case IIO_PRESSURE:
+ /*
+ * Pressure resolution is 1/64 Pascal. Scale to kPascal
+ * as required by IIO ABI.
+ */
+ *val = 1;
+ *val2 = 64000;
+ return IIO_VAL_FRACTIONAL;
+
+ case IIO_TEMP:
+ /*
+ * Temperature follows the equation:
+ * Temp[degC] = Tempcode * 0.00649 - 176.83
+ * where:
+ * Tempcode is composed the raw sampled 16 bits.
+ *
+ * Hence, to produce a temperature in milli-degrees
+ * Celsius according to IIO ABI, we need to apply the
+ * following equation to raw samples:
+ * Temp[milli degC] = (Tempcode + Offset) * Scale
+ * where:
+ * Offset = -176.83 / 0.00649
+ * Scale = 0.00649 * 1000
+ */
+ *val = 6;
+ *val2 = 490000;
+ return IIO_VAL_INT_PLUS_MICRO;
+
+ default:
+ return -EINVAL;
+ }
+
+ case IIO_CHAN_INFO_OFFSET:
+ switch (chan->type) {
+ case IIO_TEMP:
+ *val = -17683000;
+ *val2 = 649;
+ return IIO_VAL_FRACTIONAL;
+
+ default:
+ return -EINVAL;
+ }
+
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ *val = zpa2326_get_frequency(indio_dev);
+ return IIO_VAL_INT;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static int zpa2326_write_raw(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ int val,
+ int val2,
+ long mask)
+{
+ if ((mask != IIO_CHAN_INFO_SAMP_FREQ) || val2)
+ return -EINVAL;
+
+ return zpa2326_set_frequency(indio_dev, val);
+}
+
+static const struct iio_chan_spec zpa2326_channels[] = {
+ [0] = {
+ .type = IIO_PRESSURE,
+ .scan_index = 0,
+ .scan_type = {
+ .sign = 'u',
+ .realbits = 24,
+ .storagebits = 32,
+ .endianness = IIO_LE,
+ },
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE),
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ },
+ [1] = {
+ .type = IIO_TEMP,
+ .scan_index = 1,
+ .scan_type = {
+ .sign = 's',
+ .realbits = 16,
+ .storagebits = 16,
+ .endianness = IIO_LE,
+ },
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_OFFSET),
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ },
+ [2] = IIO_CHAN_SOFT_TIMESTAMP(2),
+};
+
+static const struct iio_info zpa2326_info = {
+ .driver_module = THIS_MODULE,
+ .attrs = &zpa2326_attribute_group,
+ .read_raw = zpa2326_read_raw,
+ .write_raw = zpa2326_write_raw,
+};
+
+static struct iio_dev *zpa2326_create_managed_iiodev(struct device *device,
+ const char *name,
+ struct regmap *regmap)
+{
+ struct iio_dev *indio_dev;
+
+ /* Allocate space to hold IIO device internal state. */
+ indio_dev = devm_iio_device_alloc(device,
+ sizeof(struct zpa2326_private));
+ if (!indio_dev)
+ return NULL;
+
+ /* Setup for userspace synchronous on demand sampling. */
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->dev.parent = device;
+ indio_dev->channels = zpa2326_channels;
+ indio_dev->num_channels = ARRAY_SIZE(zpa2326_channels);
+ indio_dev->name = name;
+ indio_dev->info = &zpa2326_info;
+
+ return indio_dev;
+}
+
+int zpa2326_probe(struct device *parent,
+ const char *name,
+ int irq,
+ unsigned int hwid,
+ struct regmap *regmap)
+{
+ struct iio_dev *indio_dev;
+ struct zpa2326_private *priv;
+ int err;
+ unsigned int id;
+
+ indio_dev = zpa2326_create_managed_iiodev(parent, name, regmap);
+ if (!indio_dev)
+ return -ENOMEM;
+
+ priv = iio_priv(indio_dev);
+
+ priv->vref = devm_regulator_get(parent, "vref");
+ if (IS_ERR(priv->vref))
+ return PTR_ERR(priv->vref);
+
+ priv->vdd = devm_regulator_get(parent, "vdd");
+ if (IS_ERR(priv->vdd))
+ return PTR_ERR(priv->vdd);
+
+ /* Set default hardware sampling frequency to highest rate supported. */
+ priv->frequency = zpa2326_highest_frequency();
+
+ /*
+ * Plug device's underlying bus abstraction : this MUST be set before
+ * registering interrupt handlers since an interrupt might happen if
+ * power up sequence is not properly applied.
+ */
+ priv->regmap = regmap;
+
+ err = devm_iio_triggered_buffer_setup(parent, indio_dev, NULL,
+ zpa2326_trigger_handler,
+ &zpa2326_buffer_setup_ops);
+ if (err)
+ return err;
+
+ err = zpa2326_init_managed_trigger(parent, indio_dev, priv, irq);
+ if (err)
+ return err;
+
+ err = zpa2326_init_managed_irq(parent, indio_dev, priv, irq);
+ if (err)
+ return err;
+
+ /* Power up to check device ID and perform initial hardware setup. */
+ err = zpa2326_power_on(indio_dev, priv);
+ if (err)
+ return err;
+
+ /* Read id register to check we are talking to the right slave. */
+ err = regmap_read(regmap, ZPA2326_DEVICE_ID_REG, &id);
+ if (err)
+ goto sleep;
+
+ if (id != hwid) {
+ dev_err(parent, "found device with unexpected id %02x", id);
+ err = -ENODEV;
+ goto sleep;
+ }
+
+ err = zpa2326_config_oneshot(indio_dev, irq);
+ if (err)
+ goto sleep;
+
+ /* Setup done : go sleeping. Device will be awaken upon user request. */
+ err = zpa2326_sleep(indio_dev);
+ if (err)
+ goto poweroff;
+
+ dev_set_drvdata(parent, indio_dev);
+
+ zpa2326_init_runtime(parent);
+
+ err = iio_device_register(indio_dev);
+ if (err) {
+ zpa2326_fini_runtime(parent);
+ goto poweroff;
+ }
+
+ return 0;
+
+sleep:
+ /* Put to sleep just in case power regulators are "dummy" ones. */
+ zpa2326_sleep(indio_dev);
+poweroff:
+ zpa2326_power_off(indio_dev, priv);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(zpa2326_probe);
+
+void zpa2326_remove(const struct device *parent)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(parent);
+
+ iio_device_unregister(indio_dev);
+ zpa2326_fini_runtime(indio_dev->dev.parent);
+ zpa2326_sleep(indio_dev);
+ zpa2326_power_off(indio_dev, iio_priv(indio_dev));
+}
+EXPORT_SYMBOL_GPL(zpa2326_remove);
+
+MODULE_AUTHOR("Gregor Boirie <gregor.boirie@parrot.com>");
+MODULE_DESCRIPTION("Core driver for Murata ZPA2326 pressure sensor");
+MODULE_LICENSE("GPL v2");