summaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw/qib/qib_pcie.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/infiniband/hw/qib/qib_pcie.c')
-rw-r--r--drivers/infiniband/hw/qib/qib_pcie.c149
1 files changed, 60 insertions, 89 deletions
diff --git a/drivers/infiniband/hw/qib/qib_pcie.c b/drivers/infiniband/hw/qib/qib_pcie.c
index c379b8342a09..d90403e31a9d 100644
--- a/drivers/infiniband/hw/qib/qib_pcie.c
+++ b/drivers/infiniband/hw/qib/qib_pcie.c
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2010 - 2017 Intel Corporation. All rights reserved.
* Copyright (c) 2008, 2009 QLogic Corporation. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -187,112 +188,84 @@ void qib_pcie_ddcleanup(struct qib_devdata *dd)
pci_set_drvdata(dd->pcidev, NULL);
}
-static void qib_msix_setup(struct qib_devdata *dd, int pos, u32 *msixcnt,
- struct qib_msix_entry *qib_msix_entry)
-{
- int ret;
- int nvec = *msixcnt;
- struct msix_entry *msix_entry;
- int i;
-
- ret = pci_msix_vec_count(dd->pcidev);
- if (ret < 0)
- goto do_intx;
-
- nvec = min(nvec, ret);
-
- /* We can't pass qib_msix_entry array to qib_msix_setup
- * so use a dummy msix_entry array and copy the allocated
- * irq back to the qib_msix_entry array. */
- msix_entry = kcalloc(nvec, sizeof(*msix_entry), GFP_KERNEL);
- if (!msix_entry)
- goto do_intx;
-
- for (i = 0; i < nvec; i++)
- msix_entry[i] = qib_msix_entry[i].msix;
-
- ret = pci_enable_msix_range(dd->pcidev, msix_entry, 1, nvec);
- if (ret < 0)
- goto free_msix_entry;
- else
- nvec = ret;
-
- for (i = 0; i < nvec; i++)
- qib_msix_entry[i].msix = msix_entry[i];
-
- kfree(msix_entry);
- *msixcnt = nvec;
- return;
-
-free_msix_entry:
- kfree(msix_entry);
-
-do_intx:
- qib_dev_err(
- dd,
- "pci_enable_msix_range %d vectors failed: %d, falling back to INTx\n",
- nvec, ret);
- *msixcnt = 0;
- qib_enable_intx(dd->pcidev);
-}
-
/**
* We save the msi lo and hi values, so we can restore them after
* chip reset (the kernel PCI infrastructure doesn't yet handle that
* correctly.
*/
-static int qib_msi_setup(struct qib_devdata *dd, int pos)
+static void qib_msi_setup(struct qib_devdata *dd, int pos)
{
struct pci_dev *pdev = dd->pcidev;
u16 control;
- int ret;
- ret = pci_enable_msi(pdev);
- if (ret)
- qib_dev_err(dd,
- "pci_enable_msi failed: %d, interrupts may not work\n",
- ret);
- /* continue even if it fails, we may still be OK... */
-
- pci_read_config_dword(pdev, pos + PCI_MSI_ADDRESS_LO,
- &dd->msi_lo);
- pci_read_config_dword(pdev, pos + PCI_MSI_ADDRESS_HI,
- &dd->msi_hi);
+ pci_read_config_dword(pdev, pos + PCI_MSI_ADDRESS_LO, &dd->msi_lo);
+ pci_read_config_dword(pdev, pos + PCI_MSI_ADDRESS_HI, &dd->msi_hi);
pci_read_config_word(pdev, pos + PCI_MSI_FLAGS, &control);
+
/* now save the data (vector) info */
- pci_read_config_word(pdev, pos + ((control & PCI_MSI_FLAGS_64BIT)
- ? 12 : 8),
+ pci_read_config_word(pdev,
+ pos + ((control & PCI_MSI_FLAGS_64BIT) ? 12 : 8),
&dd->msi_data);
- return ret;
}
-int qib_pcie_params(struct qib_devdata *dd, u32 minw, u32 *nent,
- struct qib_msix_entry *entry)
+static int qib_allocate_irqs(struct qib_devdata *dd, u32 maxvec)
+{
+ unsigned int flags = PCI_IRQ_LEGACY;
+
+ /* Check our capabilities */
+ if (dd->pcidev->msix_cap) {
+ flags |= PCI_IRQ_MSIX;
+ } else {
+ if (dd->pcidev->msi_cap) {
+ flags |= PCI_IRQ_MSI;
+ /* Get msi_lo and msi_hi */
+ qib_msi_setup(dd, dd->pcidev->msi_cap);
+ }
+ }
+
+ if (!(flags & (PCI_IRQ_MSIX | PCI_IRQ_MSI)))
+ qib_dev_err(dd, "No PCI MSI or MSIx capability!\n");
+
+ return pci_alloc_irq_vectors(dd->pcidev, 1, maxvec, flags);
+}
+
+int qib_pcie_params(struct qib_devdata *dd, u32 minw, u32 *nent)
{
u16 linkstat, speed;
- int pos = 0, ret = 1;
+ int nvec;
+ int maxvec;
+ int ret = 0;
if (!pci_is_pcie(dd->pcidev)) {
qib_dev_err(dd, "Can't find PCI Express capability!\n");
/* set up something... */
dd->lbus_width = 1;
dd->lbus_speed = 2500; /* Gen1, 2.5GHz */
+ ret = -1;
goto bail;
}
- pos = dd->pcidev->msix_cap;
- if (nent && *nent && pos) {
- qib_msix_setup(dd, pos, nent, entry);
- ret = 0; /* did it, either MSIx or INTx */
- } else {
- pos = dd->pcidev->msi_cap;
- if (pos)
- ret = qib_msi_setup(dd, pos);
- else
- qib_dev_err(dd, "No PCI MSI or MSIx capability!\n");
+ maxvec = (nent && *nent) ? *nent : 1;
+ nvec = qib_allocate_irqs(dd, maxvec);
+ if (nvec < 0) {
+ ret = nvec;
+ goto bail;
+ }
+
+ /*
+ * If nent exists, make sure to record how many vectors were allocated
+ */
+ if (nent) {
+ *nent = nvec;
+
+ /*
+ * If we requested (nent) MSIX, but msix_enabled is not set,
+ * pci_alloc_irq_vectors() enabled INTx.
+ */
+ if (!dd->pcidev->msix_enabled)
+ qib_dev_err(dd,
+ "no msix vectors allocated, using INTx\n");
}
- if (!pos)
- qib_enable_intx(dd->pcidev);
pcie_capability_read_word(dd->pcidev, PCI_EXP_LNKSTA, &linkstat);
/*
@@ -379,7 +352,7 @@ int qib_reinit_intr(struct qib_devdata *dd)
ret = 1;
bail:
if (!ret && (dd->flags & QIB_HAS_INTX)) {
- qib_enable_intx(dd->pcidev);
+ qib_enable_intx(dd);
ret = 1;
}
@@ -397,7 +370,7 @@ bail:
void qib_nomsi(struct qib_devdata *dd)
{
dd->msi_lo = 0;
- pci_disable_msi(dd->pcidev);
+ pci_free_irq_vectors(dd->pcidev);
}
/*
@@ -405,23 +378,21 @@ void qib_nomsi(struct qib_devdata *dd)
*/
void qib_nomsix(struct qib_devdata *dd)
{
- pci_disable_msix(dd->pcidev);
+ pci_free_irq_vectors(dd->pcidev);
}
/*
* Similar to pci_intx(pdev, 1), except that we make sure
* msi(x) is off.
*/
-void qib_enable_intx(struct pci_dev *pdev)
+void qib_enable_intx(struct qib_devdata *dd)
{
u16 cw, new;
int pos;
+ struct pci_dev *pdev = dd->pcidev;
- /* first, turn on INTx */
- pci_read_config_word(pdev, PCI_COMMAND, &cw);
- new = cw & ~PCI_COMMAND_INTX_DISABLE;
- if (new != cw)
- pci_write_config_word(pdev, PCI_COMMAND, new);
+ if (pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_LEGACY) < 0)
+ qib_dev_err(dd, "Failed to enable INTx\n");
pos = pdev->msi_cap;
if (pos) {