summaryrefslogtreecommitdiff
path: root/drivers/md/dm-raid.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/md/dm-raid.c')
-rw-r--r--drivers/md/dm-raid.c87
1 files changed, 38 insertions, 49 deletions
diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c
index b8f978e551d7..b40a088a2d92 100644
--- a/drivers/md/dm-raid.c
+++ b/drivers/md/dm-raid.c
@@ -2253,7 +2253,7 @@ static int super_validate(struct raid_set *rs, struct md_rdev *rdev)
struct mddev *mddev = &rs->md;
struct dm_raid_superblock *sb;
- if (rs_is_raid0(rs) || !rdev->sb_page)
+ if (rs_is_raid0(rs) || !rdev->sb_page || rdev->raid_disk < 0)
return 0;
sb = page_address(rdev->sb_page);
@@ -2316,21 +2316,19 @@ static int super_validate(struct raid_set *rs, struct md_rdev *rdev)
static int analyse_superblocks(struct dm_target *ti, struct raid_set *rs)
{
int r;
- struct raid_dev *dev;
- struct md_rdev *rdev, *tmp, *freshest;
+ struct md_rdev *rdev, *freshest;
struct mddev *mddev = &rs->md;
freshest = NULL;
- rdev_for_each_safe(rdev, tmp, mddev) {
+ rdev_for_each(rdev, mddev) {
/*
* Skipping super_load due to CTR_FLAG_SYNC will cause
* the array to undergo initialization again as
* though it were new. This is the intended effect
* of the "sync" directive.
*
- * When reshaping capability is added, we must ensure
- * that the "sync" directive is disallowed during the
- * reshape.
+ * With reshaping capability added, we must ensure that
+ * that the "sync" directive is disallowed during the reshape.
*/
if (test_bit(__CTR_FLAG_SYNC, &rs->ctr_flags))
continue;
@@ -2347,6 +2345,7 @@ static int analyse_superblocks(struct dm_target *ti, struct raid_set *rs)
case 0:
break;
default:
+ /* This is a failure to read the superblock from the metadata device. */
/*
* We have to keep any raid0 data/metadata device pairs or
* the MD raid0 personality will fail to start the array.
@@ -2354,33 +2353,17 @@ static int analyse_superblocks(struct dm_target *ti, struct raid_set *rs)
if (rs_is_raid0(rs))
continue;
- dev = container_of(rdev, struct raid_dev, rdev);
- if (dev->meta_dev)
- dm_put_device(ti, dev->meta_dev);
-
- dev->meta_dev = NULL;
- rdev->meta_bdev = NULL;
-
- if (rdev->sb_page)
- put_page(rdev->sb_page);
-
- rdev->sb_page = NULL;
-
- rdev->sb_loaded = 0;
-
/*
- * We might be able to salvage the data device
- * even though the meta device has failed. For
- * now, we behave as though '- -' had been
- * set for this device in the table.
+ * We keep the dm_devs to be able to emit the device tuple
+ * properly on the table line in raid_status() (rather than
+ * mistakenly acting as if '- -' got passed into the constructor).
+ *
+ * The rdev has to stay on the same_set list to allow for
+ * the attempt to restore faulty devices on second resume.
*/
- if (dev->data_dev)
- dm_put_device(ti, dev->data_dev);
-
- dev->data_dev = NULL;
- rdev->bdev = NULL;
-
- list_del(&rdev->same_set);
+ set_bit(Faulty, &rdev->flags);
+ rdev->raid_disk = rdev->saved_raid_disk = -1;
+ break;
}
}
@@ -3078,10 +3061,13 @@ static const char *decipher_sync_action(struct mddev *mddev)
* 'D' = Dead/Failed device
* 'a' = Alive but not in-sync
* 'A' = Alive and in-sync
+ * '-' = Non-existing device (i.e. uspace passed '- -' into the ctr)
*/
static const char *__raid_dev_status(struct md_rdev *rdev, bool array_in_sync)
{
- if (test_bit(Faulty, &rdev->flags))
+ if (!rdev->bdev)
+ return "-";
+ else if (test_bit(Faulty, &rdev->flags))
return "D";
else if (!array_in_sync || !test_bit(In_sync, &rdev->flags))
return "a";
@@ -3183,7 +3169,6 @@ static void raid_status(struct dm_target *ti, status_type_t type,
sector_t progress, resync_max_sectors, resync_mismatches;
const char *sync_action;
struct raid_type *rt;
- struct md_rdev *rdev;
switch (type) {
case STATUSTYPE_INFO:
@@ -3204,9 +3189,9 @@ static void raid_status(struct dm_target *ti, status_type_t type,
atomic64_read(&mddev->resync_mismatches) : 0;
sync_action = decipher_sync_action(&rs->md);
- /* HM FIXME: do we want another state char for raid0? It shows 'D' or 'A' now */
- rdev_for_each(rdev, mddev)
- DMEMIT(__raid_dev_status(rdev, array_in_sync));
+ /* HM FIXME: do we want another state char for raid0? It shows 'D'/'A'/'-' now */
+ for (i = 0; i < rs->raid_disks; i++)
+ DMEMIT(__raid_dev_status(&rs->dev[i].rdev, array_in_sync));
/*
* In-sync/Reshape ratio:
@@ -3427,7 +3412,7 @@ static void attempt_restore_of_faulty_devices(struct raid_set *rs)
memset(cleared_failed_devices, 0, sizeof(cleared_failed_devices));
- for (i = 0; i < rs->md.raid_disks; i++) {
+ for (i = 0; i < mddev->raid_disks; i++) {
r = &rs->dev[i].rdev;
if (test_bit(Faulty, &r->flags) && r->sb_page &&
sync_page_io(r, 0, r->sb_size, r->sb_page,
@@ -3445,22 +3430,26 @@ static void attempt_restore_of_faulty_devices(struct raid_set *rs)
* '>= 0' - meaning we must call this function
* ourselves.
*/
- if ((r->raid_disk >= 0) &&
- (mddev->pers->hot_remove_disk(mddev, r) != 0))
- /* Failed to revive this device, try next */
- continue;
-
- r->raid_disk = i;
- r->saved_raid_disk = i;
flags = r->flags;
+ clear_bit(In_sync, &r->flags); /* Mandatory for hot remove. */
+ if (r->raid_disk >= 0) {
+ if (mddev->pers->hot_remove_disk(mddev, r)) {
+ /* Failed to revive this device, try next */
+ r->flags = flags;
+ continue;
+ }
+ } else
+ r->raid_disk = r->saved_raid_disk = i;
+
clear_bit(Faulty, &r->flags);
clear_bit(WriteErrorSeen, &r->flags);
- clear_bit(In_sync, &r->flags);
+
if (mddev->pers->hot_add_disk(mddev, r)) {
- r->raid_disk = -1;
- r->saved_raid_disk = -1;
+ /* Failed to revive this device, try next */
+ r->raid_disk = r->saved_raid_disk = -1;
r->flags = flags;
} else {
+ clear_bit(In_sync, &r->flags);
r->recovery_offset = 0;
set_bit(i, (void *) cleared_failed_devices);
cleared = true;
@@ -3651,7 +3640,7 @@ static void raid_resume(struct dm_target *ti)
static struct target_type raid_target = {
.name = "raid",
- .version = {1, 9, 1},
+ .version = {1, 9, 2},
.module = THIS_MODULE,
.ctr = raid_ctr,
.dtr = raid_dtr,