diff options
Diffstat (limited to 'drivers/media/common')
21 files changed, 6065 insertions, 101 deletions
diff --git a/drivers/media/common/Kconfig b/drivers/media/common/Kconfig index 326df0ad75c0..0cb7d819a5d2 100644 --- a/drivers/media/common/Kconfig +++ b/drivers/media/common/Kconfig @@ -16,6 +16,7 @@ config CYPRESS_FIRMWARE tristate "Cypress firmware helper routines" depends on USB +source "drivers/media/common/videobuf2/Kconfig" source "drivers/media/common/b2c2/Kconfig" source "drivers/media/common/saa7146/Kconfig" source "drivers/media/common/siano/Kconfig" diff --git a/drivers/media/common/Makefile b/drivers/media/common/Makefile index 2d1b0a025084..e7bc17abbbbc 100644 --- a/drivers/media/common/Makefile +++ b/drivers/media/common/Makefile @@ -1,4 +1,4 @@ -obj-y += b2c2/ saa7146/ siano/ v4l2-tpg/ +obj-y += b2c2/ saa7146/ siano/ v4l2-tpg/ videobuf2/ obj-$(CONFIG_VIDEO_CX2341X) += cx2341x.o obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o obj-$(CONFIG_CYPRESS_FIRMWARE) += cypress_firmware.o diff --git a/drivers/media/common/b2c2/Makefile b/drivers/media/common/b2c2/Makefile index 73df4a334eda..aa2dc2434ee5 100644 --- a/drivers/media/common/b2c2/Makefile +++ b/drivers/media/common/b2c2/Makefile @@ -4,6 +4,5 @@ b2c2-flexcop-objs += flexcop-sram.o flexcop-eeprom.o flexcop-misc.o b2c2-flexcop-objs += flexcop-hw-filter.o obj-$(CONFIG_DVB_B2C2_FLEXCOP) += b2c2-flexcop.o -ccflags-y += -Idrivers/media/dvb-core/ ccflags-y += -Idrivers/media/dvb-frontends/ ccflags-y += -Idrivers/media/tuners/ diff --git a/drivers/media/common/b2c2/flexcop-common.h b/drivers/media/common/b2c2/flexcop-common.h index b7e5e4c17acb..f944c59cf495 100644 --- a/drivers/media/common/b2c2/flexcop-common.h +++ b/drivers/media/common/b2c2/flexcop-common.h @@ -13,10 +13,10 @@ #include "flexcop-reg.h" -#include "dmxdev.h" -#include "dvb_demux.h" -#include "dvb_net.h" -#include "dvb_frontend.h" +#include <media/dmxdev.h> +#include <media/dvb_demux.h> +#include <media/dvb_net.h> +#include <media/dvb_frontend.h> #define FC_MAX_FEED 256 diff --git a/drivers/media/common/saa7146/saa7146_video.c b/drivers/media/common/saa7146/saa7146_video.c index 2b631eaa65b3..0dfa0c09d646 100644 --- a/drivers/media/common/saa7146/saa7146_video.c +++ b/drivers/media/common/saa7146/saa7146_video.c @@ -4,6 +4,7 @@ #include <media/v4l2-event.h> #include <media/v4l2-ctrls.h> #include <linux/module.h> +#include <linux/kernel.h> static int max_memory = 32; @@ -86,13 +87,11 @@ static struct saa7146_format formats[] = { due to this, it's impossible to provide additional *packed* formats, which are simply byte swapped (like V4L2_PIX_FMT_YUYV) ... 8-( */ -static int NUM_FORMATS = sizeof(formats)/sizeof(struct saa7146_format); - struct saa7146_format* saa7146_format_by_fourcc(struct saa7146_dev *dev, int fourcc) { - int i, j = NUM_FORMATS; + int i; - for (i = 0; i < j; i++) { + for (i = 0; i < ARRAY_SIZE(formats); i++) { if (formats[i].pixelformat == fourcc) { return formats+i; } @@ -524,7 +523,7 @@ static int vidioc_s_fbuf(struct file *file, void *fh, const struct v4l2_framebuf static int vidioc_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *f) { - if (f->index >= NUM_FORMATS) + if (f->index >= ARRAY_SIZE(formats)) return -EINVAL; strlcpy((char *)f->description, formats[f->index].name, sizeof(f->description)); @@ -1002,9 +1001,9 @@ const struct v4l2_ioctl_ops saa7146_video_ioctl_ops = { .vidioc_try_fmt_vid_overlay = vidioc_try_fmt_vid_overlay, .vidioc_s_fmt_vid_overlay = vidioc_s_fmt_vid_overlay, - .vidioc_overlay = vidioc_overlay, - .vidioc_g_fbuf = vidioc_g_fbuf, - .vidioc_s_fbuf = vidioc_s_fbuf, + .vidioc_overlay = vidioc_overlay, + .vidioc_g_fbuf = vidioc_g_fbuf, + .vidioc_s_fbuf = vidioc_s_fbuf, .vidioc_reqbufs = vidioc_reqbufs, .vidioc_querybuf = vidioc_querybuf, .vidioc_qbuf = vidioc_qbuf, @@ -1013,7 +1012,7 @@ const struct v4l2_ioctl_ops saa7146_video_ioctl_ops = { .vidioc_s_std = vidioc_s_std, .vidioc_streamon = vidioc_streamon, .vidioc_streamoff = vidioc_streamoff, - .vidioc_g_parm = vidioc_g_parm, + .vidioc_g_parm = vidioc_g_parm, .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, .vidioc_unsubscribe_event = v4l2_event_unsubscribe, }; diff --git a/drivers/media/common/siano/Makefile b/drivers/media/common/siano/Makefile index 88e2b7ffc537..b33022e0be56 100644 --- a/drivers/media/common/siano/Makefile +++ b/drivers/media/common/siano/Makefile @@ -11,7 +11,3 @@ endif ifeq ($(CONFIG_SMS_SIANO_DEBUGFS),y) smsdvb-objs += smsdvb-debugfs.o endif - -ccflags-y += -Idrivers/media/dvb-core -ccflags-y += $(extra-cflags-y) $(extra-cflags-m) - diff --git a/drivers/media/common/siano/smsdvb-debugfs.c b/drivers/media/common/siano/smsdvb-debugfs.c index 0c0878bcf251..403645fe9079 100644 --- a/drivers/media/common/siano/smsdvb-debugfs.c +++ b/drivers/media/common/siano/smsdvb-debugfs.c @@ -1,21 +1,6 @@ -/*********************************************************************** - * - * Copyright(c) 2013 Mauro Carvalho Chehab - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * - ***********************************************************************/ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright(c) 2013 Mauro Carvalho Chehab #include "smscoreapi.h" @@ -26,10 +11,10 @@ #include <linux/spinlock.h> #include <linux/usb.h> -#include "dmxdev.h" -#include "dvbdev.h" -#include "dvb_demux.h" -#include "dvb_frontend.h" +#include <media/dmxdev.h> +#include <media/dvbdev.h> +#include <media/dvb_demux.h> +#include <media/dvb_frontend.h> #include "smsdvb.h" diff --git a/drivers/media/common/siano/smsdvb-main.c b/drivers/media/common/siano/smsdvb-main.c index affde1426b7a..c0faad1ba428 100644 --- a/drivers/media/common/siano/smsdvb-main.c +++ b/drivers/media/common/siano/smsdvb-main.c @@ -26,10 +26,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include <linux/init.h> #include <asm/div64.h> -#include "dmxdev.h" -#include "dvbdev.h" -#include "dvb_demux.h" -#include "dvb_frontend.h" +#include <media/dmxdev.h> +#include <media/dvbdev.h> +#include <media/dvb_demux.h> +#include <media/dvb_frontend.h> #include "sms-cards.h" @@ -271,7 +271,7 @@ static void smsdvb_update_per_slices(struct smsdvb_client_t *client, c->post_bit_count.stat[0].uvalue += p->ber_bit_count; /* Legacy PER/BER */ - tmp = p->ets_packets * 65535; + tmp = p->ets_packets * 65535ULL; if (p->ts_packets + p->ets_packets) do_div(tmp, p->ts_packets + p->ets_packets); client->legacy_per = tmp; diff --git a/drivers/media/common/siano/smsir.c b/drivers/media/common/siano/smsir.c index e77bb0c95e69..56db0a944421 100644 --- a/drivers/media/common/siano/smsir.c +++ b/drivers/media/common/siano/smsir.c @@ -1,28 +1,13 @@ -/**************************************************************** - - Siano Mobile Silicon, Inc. - MDTV receiver kernel modules. - Copyright (C) 2006-2009, Uri Shkolnik - - Copyright (c) 2010 - Mauro Carvalho Chehab - - Ported the driver to use rc-core - - IR raw event decoding is now done at rc-core - - Code almost re-written - - This program is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see <http://www.gnu.org/licenses/>. - - ****************************************************************/ +// SPDX-License-Identifier: GPL-2.0+ +// +// Siano Mobile Silicon, Inc. +// MDTV receiver kernel modules. +// Copyright (C) 2006-2009, Uri Shkolnik +// +// Copyright (c) 2010 - Mauro Carvalho Chehab +// - Ported the driver to use rc-core +// - IR raw event decoding is now done at rc-core +// - Code almost re-written #include "smscoreapi.h" diff --git a/drivers/media/common/siano/smsir.h b/drivers/media/common/siano/smsir.h index d9abd96ef48b..b2c54c256e86 100644 --- a/drivers/media/common/siano/smsir.h +++ b/drivers/media/common/siano/smsir.h @@ -1,28 +1,15 @@ -/**************************************************************** - -Siano Mobile Silicon, Inc. -MDTV receiver kernel modules. -Copyright (C) 2006-2009, Uri Shkolnik - - Copyright (c) 2010 - Mauro Carvalho Chehab - - Ported the driver to use rc-core - - IR raw event decoding is now done at rc-core - - Code almost re-written - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - - This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. - -****************************************************************/ +/* + * SPDX-License-Identifier: GPL-2.0+ + * + * Siano Mobile Silicon, Inc. + * MDTV receiver kernel modules. + * Copyright (C) 2006-2009, Uri Shkolnik + * + * Copyright (c) 2010 - Mauro Carvalho Chehab + * - Ported the driver to use rc-core + * - IR raw event decoding is now done at rc-core + * - Code almost re-written + */ #ifndef __SMS_IR_H__ #define __SMS_IR_H__ diff --git a/drivers/media/common/v4l2-tpg/v4l2-tpg-colors.c b/drivers/media/common/v4l2-tpg/v4l2-tpg-colors.c index 5b5f95c38fe1..43180204fab2 100644 --- a/drivers/media/common/v4l2-tpg/v4l2-tpg-colors.c +++ b/drivers/media/common/v4l2-tpg/v4l2-tpg-colors.c @@ -36,10 +36,10 @@ */ #include <linux/videodev2.h> -#include <media/v4l2-tpg-colors.h> +#include <media/tpg/v4l2-tpg.h> /* sRGB colors with range [0-255] */ -const struct color tpg_colors[TPG_COLOR_MAX] = { +const struct tpg_rbg_color8 tpg_colors[TPG_COLOR_MAX] = { /* * Colors to test colorspace conversion: converting these colors * to other colorspaces will never lead to out-of-gamut colors. @@ -597,7 +597,7 @@ const unsigned short tpg_linear_to_rec709[255 * 16 + 1] = { }; /* Generated table */ -const struct color16 tpg_csc_colors[V4L2_COLORSPACE_DCI_P3 + 1][V4L2_XFER_FUNC_SMPTE2084 + 1][TPG_COLOR_CSC_BLACK + 1] = { +const struct tpg_rbg_color16 tpg_csc_colors[V4L2_COLORSPACE_DCI_P3 + 1][V4L2_XFER_FUNC_SMPTE2084 + 1][TPG_COLOR_CSC_BLACK + 1] = { [V4L2_COLORSPACE_SMPTE170M][V4L2_XFER_FUNC_709][0] = { 2939, 2939, 2939 }, [V4L2_COLORSPACE_SMPTE170M][V4L2_XFER_FUNC_709][1] = { 2953, 2963, 586 }, [V4L2_COLORSPACE_SMPTE170M][V4L2_XFER_FUNC_709][2] = { 0, 2967, 2937 }, @@ -1392,7 +1392,7 @@ int main(int argc, char **argv) printf("\n};\n\n"); printf("/* Generated table */\n"); - printf("const struct color16 tpg_csc_colors[V4L2_COLORSPACE_DCI_P3 + 1][V4L2_XFER_FUNC_SMPTE2084 + 1][TPG_COLOR_CSC_BLACK + 1] = {\n"); + printf("const struct tpg_rbg_color16 tpg_csc_colors[V4L2_COLORSPACE_DCI_P3 + 1][V4L2_XFER_FUNC_SMPTE2084 + 1][TPG_COLOR_CSC_BLACK + 1] = {\n"); for (c = 0; c <= V4L2_COLORSPACE_DCI_P3; c++) { for (x = 1; x <= V4L2_XFER_FUNC_SMPTE2084; x++) { for (i = 0; i <= TPG_COLOR_CSC_BLACK; i++) { diff --git a/drivers/media/common/v4l2-tpg/v4l2-tpg-core.c b/drivers/media/common/v4l2-tpg/v4l2-tpg-core.c index f96968c11312..2b3d4ac4dfd4 100644 --- a/drivers/media/common/v4l2-tpg/v4l2-tpg-core.c +++ b/drivers/media/common/v4l2-tpg/v4l2-tpg-core.c @@ -21,7 +21,7 @@ */ #include <linux/module.h> -#include <media/v4l2-tpg.h> +#include <media/tpg/v4l2-tpg.h> /* Must remain in sync with enum tpg_pattern */ const char * const tpg_pattern_strings[] = { diff --git a/drivers/media/common/videobuf2/Kconfig b/drivers/media/common/videobuf2/Kconfig new file mode 100644 index 000000000000..5df05250de94 --- /dev/null +++ b/drivers/media/common/videobuf2/Kconfig @@ -0,0 +1,31 @@ +# Used by drivers that need Videobuf2 modules +config VIDEOBUF2_CORE + select DMA_SHARED_BUFFER + tristate + +config VIDEOBUF2_MEMOPS + tristate + select FRAME_VECTOR + +config VIDEOBUF2_DMA_CONTIG + tristate + depends on HAS_DMA + select VIDEOBUF2_CORE + select VIDEOBUF2_MEMOPS + select DMA_SHARED_BUFFER + +config VIDEOBUF2_VMALLOC + tristate + select VIDEOBUF2_CORE + select VIDEOBUF2_MEMOPS + select DMA_SHARED_BUFFER + +config VIDEOBUF2_DMA_SG + tristate + depends on HAS_DMA + select VIDEOBUF2_CORE + select VIDEOBUF2_MEMOPS + +config VIDEOBUF2_DVB + tristate + select VIDEOBUF2_CORE diff --git a/drivers/media/common/videobuf2/Makefile b/drivers/media/common/videobuf2/Makefile new file mode 100644 index 000000000000..19de5ccda20b --- /dev/null +++ b/drivers/media/common/videobuf2/Makefile @@ -0,0 +1,7 @@ + +obj-$(CONFIG_VIDEOBUF2_CORE) += videobuf2-core.o videobuf2-v4l2.o +obj-$(CONFIG_VIDEOBUF2_MEMOPS) += videobuf2-memops.o +obj-$(CONFIG_VIDEOBUF2_VMALLOC) += videobuf2-vmalloc.o +obj-$(CONFIG_VIDEOBUF2_DMA_CONTIG) += videobuf2-dma-contig.o +obj-$(CONFIG_VIDEOBUF2_DMA_SG) += videobuf2-dma-sg.o +obj-$(CONFIG_VIDEOBUF2_DVB) += videobuf2-dvb.o diff --git a/drivers/media/common/videobuf2/videobuf2-core.c b/drivers/media/common/videobuf2/videobuf2-core.c new file mode 100644 index 000000000000..9a84c7092714 --- /dev/null +++ b/drivers/media/common/videobuf2/videobuf2-core.c @@ -0,0 +1,2620 @@ +/* + * videobuf2-core.c - video buffer 2 core framework + * + * Copyright (C) 2010 Samsung Electronics + * + * Author: Pawel Osciak <pawel@osciak.com> + * Marek Szyprowski <m.szyprowski@samsung.com> + * + * The vb2_thread implementation was based on code from videobuf-dvb.c: + * (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SUSE Labs] + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/poll.h> +#include <linux/slab.h> +#include <linux/sched.h> +#include <linux/freezer.h> +#include <linux/kthread.h> + +#include <media/videobuf2-core.h> +#include <media/v4l2-mc.h> + +#include <trace/events/vb2.h> + +static int debug; +module_param(debug, int, 0644); + +#define dprintk(level, fmt, arg...) \ + do { \ + if (debug >= level) \ + pr_info("%s: " fmt, __func__, ## arg); \ + } while (0) + +#ifdef CONFIG_VIDEO_ADV_DEBUG + +/* + * If advanced debugging is on, then count how often each op is called + * successfully, which can either be per-buffer or per-queue. + * + * This makes it easy to check that the 'init' and 'cleanup' + * (and variations thereof) stay balanced. + */ + +#define log_memop(vb, op) \ + dprintk(2, "call_memop(%p, %d, %s)%s\n", \ + (vb)->vb2_queue, (vb)->index, #op, \ + (vb)->vb2_queue->mem_ops->op ? "" : " (nop)") + +#define call_memop(vb, op, args...) \ +({ \ + struct vb2_queue *_q = (vb)->vb2_queue; \ + int err; \ + \ + log_memop(vb, op); \ + err = _q->mem_ops->op ? _q->mem_ops->op(args) : 0; \ + if (!err) \ + (vb)->cnt_mem_ ## op++; \ + err; \ +}) + +#define call_ptr_memop(vb, op, args...) \ +({ \ + struct vb2_queue *_q = (vb)->vb2_queue; \ + void *ptr; \ + \ + log_memop(vb, op); \ + ptr = _q->mem_ops->op ? _q->mem_ops->op(args) : NULL; \ + if (!IS_ERR_OR_NULL(ptr)) \ + (vb)->cnt_mem_ ## op++; \ + ptr; \ +}) + +#define call_void_memop(vb, op, args...) \ +({ \ + struct vb2_queue *_q = (vb)->vb2_queue; \ + \ + log_memop(vb, op); \ + if (_q->mem_ops->op) \ + _q->mem_ops->op(args); \ + (vb)->cnt_mem_ ## op++; \ +}) + +#define log_qop(q, op) \ + dprintk(2, "call_qop(%p, %s)%s\n", q, #op, \ + (q)->ops->op ? "" : " (nop)") + +#define call_qop(q, op, args...) \ +({ \ + int err; \ + \ + log_qop(q, op); \ + err = (q)->ops->op ? (q)->ops->op(args) : 0; \ + if (!err) \ + (q)->cnt_ ## op++; \ + err; \ +}) + +#define call_void_qop(q, op, args...) \ +({ \ + log_qop(q, op); \ + if ((q)->ops->op) \ + (q)->ops->op(args); \ + (q)->cnt_ ## op++; \ +}) + +#define log_vb_qop(vb, op, args...) \ + dprintk(2, "call_vb_qop(%p, %d, %s)%s\n", \ + (vb)->vb2_queue, (vb)->index, #op, \ + (vb)->vb2_queue->ops->op ? "" : " (nop)") + +#define call_vb_qop(vb, op, args...) \ +({ \ + int err; \ + \ + log_vb_qop(vb, op); \ + err = (vb)->vb2_queue->ops->op ? \ + (vb)->vb2_queue->ops->op(args) : 0; \ + if (!err) \ + (vb)->cnt_ ## op++; \ + err; \ +}) + +#define call_void_vb_qop(vb, op, args...) \ +({ \ + log_vb_qop(vb, op); \ + if ((vb)->vb2_queue->ops->op) \ + (vb)->vb2_queue->ops->op(args); \ + (vb)->cnt_ ## op++; \ +}) + +#else + +#define call_memop(vb, op, args...) \ + ((vb)->vb2_queue->mem_ops->op ? \ + (vb)->vb2_queue->mem_ops->op(args) : 0) + +#define call_ptr_memop(vb, op, args...) \ + ((vb)->vb2_queue->mem_ops->op ? \ + (vb)->vb2_queue->mem_ops->op(args) : NULL) + +#define call_void_memop(vb, op, args...) \ + do { \ + if ((vb)->vb2_queue->mem_ops->op) \ + (vb)->vb2_queue->mem_ops->op(args); \ + } while (0) + +#define call_qop(q, op, args...) \ + ((q)->ops->op ? (q)->ops->op(args) : 0) + +#define call_void_qop(q, op, args...) \ + do { \ + if ((q)->ops->op) \ + (q)->ops->op(args); \ + } while (0) + +#define call_vb_qop(vb, op, args...) \ + ((vb)->vb2_queue->ops->op ? (vb)->vb2_queue->ops->op(args) : 0) + +#define call_void_vb_qop(vb, op, args...) \ + do { \ + if ((vb)->vb2_queue->ops->op) \ + (vb)->vb2_queue->ops->op(args); \ + } while (0) + +#endif + +#define call_bufop(q, op, args...) \ +({ \ + int ret = 0; \ + if (q && q->buf_ops && q->buf_ops->op) \ + ret = q->buf_ops->op(args); \ + ret; \ +}) + +#define call_void_bufop(q, op, args...) \ +({ \ + if (q && q->buf_ops && q->buf_ops->op) \ + q->buf_ops->op(args); \ +}) + +static void __vb2_queue_cancel(struct vb2_queue *q); +static void __enqueue_in_driver(struct vb2_buffer *vb); + +/* + * __vb2_buf_mem_alloc() - allocate video memory for the given buffer + */ +static int __vb2_buf_mem_alloc(struct vb2_buffer *vb) +{ + struct vb2_queue *q = vb->vb2_queue; + void *mem_priv; + int plane; + int ret = -ENOMEM; + + /* + * Allocate memory for all planes in this buffer + * NOTE: mmapped areas should be page aligned + */ + for (plane = 0; plane < vb->num_planes; ++plane) { + unsigned long size = PAGE_ALIGN(vb->planes[plane].length); + + mem_priv = call_ptr_memop(vb, alloc, + q->alloc_devs[plane] ? : q->dev, + q->dma_attrs, size, q->dma_dir, q->gfp_flags); + if (IS_ERR_OR_NULL(mem_priv)) { + if (mem_priv) + ret = PTR_ERR(mem_priv); + goto free; + } + + /* Associate allocator private data with this plane */ + vb->planes[plane].mem_priv = mem_priv; + } + + return 0; +free: + /* Free already allocated memory if one of the allocations failed */ + for (; plane > 0; --plane) { + call_void_memop(vb, put, vb->planes[plane - 1].mem_priv); + vb->planes[plane - 1].mem_priv = NULL; + } + + return ret; +} + +/* + * __vb2_buf_mem_free() - free memory of the given buffer + */ +static void __vb2_buf_mem_free(struct vb2_buffer *vb) +{ + unsigned int plane; + + for (plane = 0; plane < vb->num_planes; ++plane) { + call_void_memop(vb, put, vb->planes[plane].mem_priv); + vb->planes[plane].mem_priv = NULL; + dprintk(3, "freed plane %d of buffer %d\n", plane, vb->index); + } +} + +/* + * __vb2_buf_userptr_put() - release userspace memory associated with + * a USERPTR buffer + */ +static void __vb2_buf_userptr_put(struct vb2_buffer *vb) +{ + unsigned int plane; + + for (plane = 0; plane < vb->num_planes; ++plane) { + if (vb->planes[plane].mem_priv) + call_void_memop(vb, put_userptr, vb->planes[plane].mem_priv); + vb->planes[plane].mem_priv = NULL; + } +} + +/* + * __vb2_plane_dmabuf_put() - release memory associated with + * a DMABUF shared plane + */ +static void __vb2_plane_dmabuf_put(struct vb2_buffer *vb, struct vb2_plane *p) +{ + if (!p->mem_priv) + return; + + if (p->dbuf_mapped) + call_void_memop(vb, unmap_dmabuf, p->mem_priv); + + call_void_memop(vb, detach_dmabuf, p->mem_priv); + dma_buf_put(p->dbuf); + p->mem_priv = NULL; + p->dbuf = NULL; + p->dbuf_mapped = 0; +} + +/* + * __vb2_buf_dmabuf_put() - release memory associated with + * a DMABUF shared buffer + */ +static void __vb2_buf_dmabuf_put(struct vb2_buffer *vb) +{ + unsigned int plane; + + for (plane = 0; plane < vb->num_planes; ++plane) + __vb2_plane_dmabuf_put(vb, &vb->planes[plane]); +} + +/* + * __setup_offsets() - setup unique offsets ("cookies") for every plane in + * the buffer. + */ +static void __setup_offsets(struct vb2_buffer *vb) +{ + struct vb2_queue *q = vb->vb2_queue; + unsigned int plane; + unsigned long off = 0; + + if (vb->index) { + struct vb2_buffer *prev = q->bufs[vb->index - 1]; + struct vb2_plane *p = &prev->planes[prev->num_planes - 1]; + + off = PAGE_ALIGN(p->m.offset + p->length); + } + + for (plane = 0; plane < vb->num_planes; ++plane) { + vb->planes[plane].m.offset = off; + + dprintk(3, "buffer %d, plane %d offset 0x%08lx\n", + vb->index, plane, off); + + off += vb->planes[plane].length; + off = PAGE_ALIGN(off); + } +} + +/* + * __vb2_queue_alloc() - allocate videobuf buffer structures and (for MMAP type) + * video buffer memory for all buffers/planes on the queue and initializes the + * queue + * + * Returns the number of buffers successfully allocated. + */ +static int __vb2_queue_alloc(struct vb2_queue *q, enum vb2_memory memory, + unsigned int num_buffers, unsigned int num_planes, + const unsigned plane_sizes[VB2_MAX_PLANES]) +{ + unsigned int buffer, plane; + struct vb2_buffer *vb; + int ret; + + /* Ensure that q->num_buffers+num_buffers is below VB2_MAX_FRAME */ + num_buffers = min_t(unsigned int, num_buffers, + VB2_MAX_FRAME - q->num_buffers); + + for (buffer = 0; buffer < num_buffers; ++buffer) { + /* Allocate videobuf buffer structures */ + vb = kzalloc(q->buf_struct_size, GFP_KERNEL); + if (!vb) { + dprintk(1, "memory alloc for buffer struct failed\n"); + break; + } + + vb->state = VB2_BUF_STATE_DEQUEUED; + vb->vb2_queue = q; + vb->num_planes = num_planes; + vb->index = q->num_buffers + buffer; + vb->type = q->type; + vb->memory = memory; + for (plane = 0; plane < num_planes; ++plane) { + vb->planes[plane].length = plane_sizes[plane]; + vb->planes[plane].min_length = plane_sizes[plane]; + } + q->bufs[vb->index] = vb; + + /* Allocate video buffer memory for the MMAP type */ + if (memory == VB2_MEMORY_MMAP) { + ret = __vb2_buf_mem_alloc(vb); + if (ret) { + dprintk(1, "failed allocating memory for buffer %d\n", + buffer); + q->bufs[vb->index] = NULL; + kfree(vb); + break; + } + __setup_offsets(vb); + /* + * Call the driver-provided buffer initialization + * callback, if given. An error in initialization + * results in queue setup failure. + */ + ret = call_vb_qop(vb, buf_init, vb); + if (ret) { + dprintk(1, "buffer %d %p initialization failed\n", + buffer, vb); + __vb2_buf_mem_free(vb); + q->bufs[vb->index] = NULL; + kfree(vb); + break; + } + } + } + + dprintk(1, "allocated %d buffers, %d plane(s) each\n", + buffer, num_planes); + + return buffer; +} + +/* + * __vb2_free_mem() - release all video buffer memory for a given queue + */ +static void __vb2_free_mem(struct vb2_queue *q, unsigned int buffers) +{ + unsigned int buffer; + struct vb2_buffer *vb; + + for (buffer = q->num_buffers - buffers; buffer < q->num_buffers; + ++buffer) { + vb = q->bufs[buffer]; + if (!vb) + continue; + + /* Free MMAP buffers or release USERPTR buffers */ + if (q->memory == VB2_MEMORY_MMAP) + __vb2_buf_mem_free(vb); + else if (q->memory == VB2_MEMORY_DMABUF) + __vb2_buf_dmabuf_put(vb); + else + __vb2_buf_userptr_put(vb); + } +} + +/* + * __vb2_queue_free() - free buffers at the end of the queue - video memory and + * related information, if no buffers are left return the queue to an + * uninitialized state. Might be called even if the queue has already been freed. + */ +static int __vb2_queue_free(struct vb2_queue *q, unsigned int buffers) +{ + unsigned int buffer; + + /* + * Sanity check: when preparing a buffer the queue lock is released for + * a short while (see __buf_prepare for the details), which would allow + * a race with a reqbufs which can call this function. Removing the + * buffers from underneath __buf_prepare is obviously a bad idea, so we + * check if any of the buffers is in the state PREPARING, and if so we + * just return -EAGAIN. + */ + for (buffer = q->num_buffers - buffers; buffer < q->num_buffers; + ++buffer) { + if (q->bufs[buffer] == NULL) + continue; + if (q->bufs[buffer]->state == VB2_BUF_STATE_PREPARING) { + dprintk(1, "preparing buffers, cannot free\n"); + return -EAGAIN; + } + } + + /* Call driver-provided cleanup function for each buffer, if provided */ + for (buffer = q->num_buffers - buffers; buffer < q->num_buffers; + ++buffer) { + struct vb2_buffer *vb = q->bufs[buffer]; + + if (vb && vb->planes[0].mem_priv) + call_void_vb_qop(vb, buf_cleanup, vb); + } + + /* Release video buffer memory */ + __vb2_free_mem(q, buffers); + +#ifdef CONFIG_VIDEO_ADV_DEBUG + /* + * Check that all the calls were balances during the life-time of this + * queue. If not (or if the debug level is 1 or up), then dump the + * counters to the kernel log. + */ + if (q->num_buffers) { + bool unbalanced = q->cnt_start_streaming != q->cnt_stop_streaming || + q->cnt_wait_prepare != q->cnt_wait_finish; + + if (unbalanced || debug) { + pr_info("counters for queue %p:%s\n", q, + unbalanced ? " UNBALANCED!" : ""); + pr_info(" setup: %u start_streaming: %u stop_streaming: %u\n", + q->cnt_queue_setup, q->cnt_start_streaming, + q->cnt_stop_streaming); + pr_info(" wait_prepare: %u wait_finish: %u\n", + q->cnt_wait_prepare, q->cnt_wait_finish); + } + q->cnt_queue_setup = 0; + q->cnt_wait_prepare = 0; + q->cnt_wait_finish = 0; + q->cnt_start_streaming = 0; + q->cnt_stop_streaming = 0; + } + for (buffer = 0; buffer < q->num_buffers; ++buffer) { + struct vb2_buffer *vb = q->bufs[buffer]; + bool unbalanced = vb->cnt_mem_alloc != vb->cnt_mem_put || + vb->cnt_mem_prepare != vb->cnt_mem_finish || + vb->cnt_mem_get_userptr != vb->cnt_mem_put_userptr || + vb->cnt_mem_attach_dmabuf != vb->cnt_mem_detach_dmabuf || + vb->cnt_mem_map_dmabuf != vb->cnt_mem_unmap_dmabuf || + vb->cnt_buf_queue != vb->cnt_buf_done || + vb->cnt_buf_prepare != vb->cnt_buf_finish || + vb->cnt_buf_init != vb->cnt_buf_cleanup; + + if (unbalanced || debug) { + pr_info(" counters for queue %p, buffer %d:%s\n", + q, buffer, unbalanced ? " UNBALANCED!" : ""); + pr_info(" buf_init: %u buf_cleanup: %u buf_prepare: %u buf_finish: %u\n", + vb->cnt_buf_init, vb->cnt_buf_cleanup, + vb->cnt_buf_prepare, vb->cnt_buf_finish); + pr_info(" buf_queue: %u buf_done: %u\n", + vb->cnt_buf_queue, vb->cnt_buf_done); + pr_info(" alloc: %u put: %u prepare: %u finish: %u mmap: %u\n", + vb->cnt_mem_alloc, vb->cnt_mem_put, + vb->cnt_mem_prepare, vb->cnt_mem_finish, + vb->cnt_mem_mmap); + pr_info(" get_userptr: %u put_userptr: %u\n", + vb->cnt_mem_get_userptr, vb->cnt_mem_put_userptr); + pr_info(" attach_dmabuf: %u detach_dmabuf: %u map_dmabuf: %u unmap_dmabuf: %u\n", + vb->cnt_mem_attach_dmabuf, vb->cnt_mem_detach_dmabuf, + vb->cnt_mem_map_dmabuf, vb->cnt_mem_unmap_dmabuf); + pr_info(" get_dmabuf: %u num_users: %u vaddr: %u cookie: %u\n", + vb->cnt_mem_get_dmabuf, + vb->cnt_mem_num_users, + vb->cnt_mem_vaddr, + vb->cnt_mem_cookie); + } + } +#endif + + /* Free videobuf buffers */ + for (buffer = q->num_buffers - buffers; buffer < q->num_buffers; + ++buffer) { + kfree(q->bufs[buffer]); + q->bufs[buffer] = NULL; + } + + q->num_buffers -= buffers; + if (!q->num_buffers) { + q->memory = VB2_MEMORY_UNKNOWN; + INIT_LIST_HEAD(&q->queued_list); + } + return 0; +} + +bool vb2_buffer_in_use(struct vb2_queue *q, struct vb2_buffer *vb) +{ + unsigned int plane; + for (plane = 0; plane < vb->num_planes; ++plane) { + void *mem_priv = vb->planes[plane].mem_priv; + /* + * If num_users() has not been provided, call_memop + * will return 0, apparently nobody cares about this + * case anyway. If num_users() returns more than 1, + * we are not the only user of the plane's memory. + */ + if (mem_priv && call_memop(vb, num_users, mem_priv) > 1) + return true; + } + return false; +} +EXPORT_SYMBOL(vb2_buffer_in_use); + +/* + * __buffers_in_use() - return true if any buffers on the queue are in use and + * the queue cannot be freed (by the means of REQBUFS(0)) call + */ +static bool __buffers_in_use(struct vb2_queue *q) +{ + unsigned int buffer; + for (buffer = 0; buffer < q->num_buffers; ++buffer) { + if (vb2_buffer_in_use(q, q->bufs[buffer])) + return true; + } + return false; +} + +void vb2_core_querybuf(struct vb2_queue *q, unsigned int index, void *pb) +{ + call_void_bufop(q, fill_user_buffer, q->bufs[index], pb); +} +EXPORT_SYMBOL_GPL(vb2_core_querybuf); + +/* + * __verify_userptr_ops() - verify that all memory operations required for + * USERPTR queue type have been provided + */ +static int __verify_userptr_ops(struct vb2_queue *q) +{ + if (!(q->io_modes & VB2_USERPTR) || !q->mem_ops->get_userptr || + !q->mem_ops->put_userptr) + return -EINVAL; + + return 0; +} + +/* + * __verify_mmap_ops() - verify that all memory operations required for + * MMAP queue type have been provided + */ +static int __verify_mmap_ops(struct vb2_queue *q) +{ + if (!(q->io_modes & VB2_MMAP) || !q->mem_ops->alloc || + !q->mem_ops->put || !q->mem_ops->mmap) + return -EINVAL; + + return 0; +} + +/* + * __verify_dmabuf_ops() - verify that all memory operations required for + * DMABUF queue type have been provided + */ +static int __verify_dmabuf_ops(struct vb2_queue *q) +{ + if (!(q->io_modes & VB2_DMABUF) || !q->mem_ops->attach_dmabuf || + !q->mem_ops->detach_dmabuf || !q->mem_ops->map_dmabuf || + !q->mem_ops->unmap_dmabuf) + return -EINVAL; + + return 0; +} + +int vb2_verify_memory_type(struct vb2_queue *q, + enum vb2_memory memory, unsigned int type) +{ + if (memory != VB2_MEMORY_MMAP && memory != VB2_MEMORY_USERPTR && + memory != VB2_MEMORY_DMABUF) { + dprintk(1, "unsupported memory type\n"); + return -EINVAL; + } + + if (type != q->type) { + dprintk(1, "requested type is incorrect\n"); + return -EINVAL; + } + + /* + * Make sure all the required memory ops for given memory type + * are available. + */ + if (memory == VB2_MEMORY_MMAP && __verify_mmap_ops(q)) { + dprintk(1, "MMAP for current setup unsupported\n"); + return -EINVAL; + } + + if (memory == VB2_MEMORY_USERPTR && __verify_userptr_ops(q)) { + dprintk(1, "USERPTR for current setup unsupported\n"); + return -EINVAL; + } + + if (memory == VB2_MEMORY_DMABUF && __verify_dmabuf_ops(q)) { + dprintk(1, "DMABUF for current setup unsupported\n"); + return -EINVAL; + } + + /* + * Place the busy tests at the end: -EBUSY can be ignored when + * create_bufs is called with count == 0, but count == 0 should still + * do the memory and type validation. + */ + if (vb2_fileio_is_active(q)) { + dprintk(1, "file io in progress\n"); + return -EBUSY; + } + return 0; +} +EXPORT_SYMBOL(vb2_verify_memory_type); + +int vb2_core_reqbufs(struct vb2_queue *q, enum vb2_memory memory, + unsigned int *count) +{ + unsigned int num_buffers, allocated_buffers, num_planes = 0; + unsigned plane_sizes[VB2_MAX_PLANES] = { }; + int ret; + + if (q->streaming) { + dprintk(1, "streaming active\n"); + return -EBUSY; + } + + if (*count == 0 || q->num_buffers != 0 || + (q->memory != VB2_MEMORY_UNKNOWN && q->memory != memory)) { + /* + * We already have buffers allocated, so first check if they + * are not in use and can be freed. + */ + mutex_lock(&q->mmap_lock); + if (q->memory == VB2_MEMORY_MMAP && __buffers_in_use(q)) { + mutex_unlock(&q->mmap_lock); + dprintk(1, "memory in use, cannot free\n"); + return -EBUSY; + } + + /* + * Call queue_cancel to clean up any buffers in the PREPARED or + * QUEUED state which is possible if buffers were prepared or + * queued without ever calling STREAMON. + */ + __vb2_queue_cancel(q); + ret = __vb2_queue_free(q, q->num_buffers); + mutex_unlock(&q->mmap_lock); + if (ret) + return ret; + + /* + * In case of REQBUFS(0) return immediately without calling + * driver's queue_setup() callback and allocating resources. + */ + if (*count == 0) + return 0; + } + + /* + * Make sure the requested values and current defaults are sane. + */ + WARN_ON(q->min_buffers_needed > VB2_MAX_FRAME); + num_buffers = max_t(unsigned int, *count, q->min_buffers_needed); + num_buffers = min_t(unsigned int, num_buffers, VB2_MAX_FRAME); + memset(q->alloc_devs, 0, sizeof(q->alloc_devs)); + q->memory = memory; + + /* + * Ask the driver how many buffers and planes per buffer it requires. + * Driver also sets the size and allocator context for each plane. + */ + ret = call_qop(q, queue_setup, q, &num_buffers, &num_planes, + plane_sizes, q->alloc_devs); + if (ret) + return ret; + + /* Finally, allocate buffers and video memory */ + allocated_buffers = + __vb2_queue_alloc(q, memory, num_buffers, num_planes, plane_sizes); + if (allocated_buffers == 0) { + dprintk(1, "memory allocation failed\n"); + return -ENOMEM; + } + + /* + * There is no point in continuing if we can't allocate the minimum + * number of buffers needed by this vb2_queue. + */ + if (allocated_buffers < q->min_buffers_needed) + ret = -ENOMEM; + + /* + * Check if driver can handle the allocated number of buffers. + */ + if (!ret && allocated_buffers < num_buffers) { + num_buffers = allocated_buffers; + /* + * num_planes is set by the previous queue_setup(), but since it + * signals to queue_setup() whether it is called from create_bufs() + * vs reqbufs() we zero it here to signal that queue_setup() is + * called for the reqbufs() case. + */ + num_planes = 0; + + ret = call_qop(q, queue_setup, q, &num_buffers, + &num_planes, plane_sizes, q->alloc_devs); + + if (!ret && allocated_buffers < num_buffers) + ret = -ENOMEM; + + /* + * Either the driver has accepted a smaller number of buffers, + * or .queue_setup() returned an error + */ + } + + mutex_lock(&q->mmap_lock); + q->num_buffers = allocated_buffers; + + if (ret < 0) { + /* + * Note: __vb2_queue_free() will subtract 'allocated_buffers' + * from q->num_buffers. + */ + __vb2_queue_free(q, allocated_buffers); + mutex_unlock(&q->mmap_lock); + return ret; + } + mutex_unlock(&q->mmap_lock); + + /* + * Return the number of successfully allocated buffers + * to the userspace. + */ + *count = allocated_buffers; + q->waiting_for_buffers = !q->is_output; + + return 0; +} +EXPORT_SYMBOL_GPL(vb2_core_reqbufs); + +int vb2_core_create_bufs(struct vb2_queue *q, enum vb2_memory memory, + unsigned int *count, unsigned requested_planes, + const unsigned requested_sizes[]) +{ + unsigned int num_planes = 0, num_buffers, allocated_buffers; + unsigned plane_sizes[VB2_MAX_PLANES] = { }; + int ret; + + if (q->num_buffers == VB2_MAX_FRAME) { + dprintk(1, "maximum number of buffers already allocated\n"); + return -ENOBUFS; + } + + if (!q->num_buffers) { + memset(q->alloc_devs, 0, sizeof(q->alloc_devs)); + q->memory = memory; + q->waiting_for_buffers = !q->is_output; + } + + num_buffers = min(*count, VB2_MAX_FRAME - q->num_buffers); + + if (requested_planes && requested_sizes) { + num_planes = requested_planes; + memcpy(plane_sizes, requested_sizes, sizeof(plane_sizes)); + } + + /* + * Ask the driver, whether the requested number of buffers, planes per + * buffer and their sizes are acceptable + */ + ret = call_qop(q, queue_setup, q, &num_buffers, + &num_planes, plane_sizes, q->alloc_devs); + if (ret) + return ret; + + /* Finally, allocate buffers and video memory */ + allocated_buffers = __vb2_queue_alloc(q, memory, num_buffers, + num_planes, plane_sizes); + if (allocated_buffers == 0) { + dprintk(1, "memory allocation failed\n"); + return -ENOMEM; + } + + /* + * Check if driver can handle the so far allocated number of buffers. + */ + if (allocated_buffers < num_buffers) { + num_buffers = allocated_buffers; + + /* + * q->num_buffers contains the total number of buffers, that the + * queue driver has set up + */ + ret = call_qop(q, queue_setup, q, &num_buffers, + &num_planes, plane_sizes, q->alloc_devs); + + if (!ret && allocated_buffers < num_buffers) + ret = -ENOMEM; + + /* + * Either the driver has accepted a smaller number of buffers, + * or .queue_setup() returned an error + */ + } + + mutex_lock(&q->mmap_lock); + q->num_buffers += allocated_buffers; + + if (ret < 0) { + /* + * Note: __vb2_queue_free() will subtract 'allocated_buffers' + * from q->num_buffers. + */ + __vb2_queue_free(q, allocated_buffers); + mutex_unlock(&q->mmap_lock); + return -ENOMEM; + } + mutex_unlock(&q->mmap_lock); + + /* + * Return the number of successfully allocated buffers + * to the userspace. + */ + *count = allocated_buffers; + + return 0; +} +EXPORT_SYMBOL_GPL(vb2_core_create_bufs); + +void *vb2_plane_vaddr(struct vb2_buffer *vb, unsigned int plane_no) +{ + if (plane_no >= vb->num_planes || !vb->planes[plane_no].mem_priv) + return NULL; + + return call_ptr_memop(vb, vaddr, vb->planes[plane_no].mem_priv); + +} +EXPORT_SYMBOL_GPL(vb2_plane_vaddr); + +void *vb2_plane_cookie(struct vb2_buffer *vb, unsigned int plane_no) +{ + if (plane_no >= vb->num_planes || !vb->planes[plane_no].mem_priv) + return NULL; + + return call_ptr_memop(vb, cookie, vb->planes[plane_no].mem_priv); +} +EXPORT_SYMBOL_GPL(vb2_plane_cookie); + +void vb2_buffer_done(struct vb2_buffer *vb, enum vb2_buffer_state state) +{ + struct vb2_queue *q = vb->vb2_queue; + unsigned long flags; + unsigned int plane; + + if (WARN_ON(vb->state != VB2_BUF_STATE_ACTIVE)) + return; + + if (WARN_ON(state != VB2_BUF_STATE_DONE && + state != VB2_BUF_STATE_ERROR && + state != VB2_BUF_STATE_QUEUED && + state != VB2_BUF_STATE_REQUEUEING)) + state = VB2_BUF_STATE_ERROR; + +#ifdef CONFIG_VIDEO_ADV_DEBUG + /* + * Although this is not a callback, it still does have to balance + * with the buf_queue op. So update this counter manually. + */ + vb->cnt_buf_done++; +#endif + dprintk(4, "done processing on buffer %d, state: %d\n", + vb->index, state); + + /* sync buffers */ + for (plane = 0; plane < vb->num_planes; ++plane) + call_void_memop(vb, finish, vb->planes[plane].mem_priv); + + spin_lock_irqsave(&q->done_lock, flags); + if (state == VB2_BUF_STATE_QUEUED || + state == VB2_BUF_STATE_REQUEUEING) { + vb->state = VB2_BUF_STATE_QUEUED; + } else { + /* Add the buffer to the done buffers list */ + list_add_tail(&vb->done_entry, &q->done_list); + vb->state = state; + } + atomic_dec(&q->owned_by_drv_count); + spin_unlock_irqrestore(&q->done_lock, flags); + + trace_vb2_buf_done(q, vb); + + switch (state) { + case VB2_BUF_STATE_QUEUED: + return; + case VB2_BUF_STATE_REQUEUEING: + if (q->start_streaming_called) + __enqueue_in_driver(vb); + return; + default: + /* Inform any processes that may be waiting for buffers */ + wake_up(&q->done_wq); + break; + } +} +EXPORT_SYMBOL_GPL(vb2_buffer_done); + +void vb2_discard_done(struct vb2_queue *q) +{ + struct vb2_buffer *vb; + unsigned long flags; + + spin_lock_irqsave(&q->done_lock, flags); + list_for_each_entry(vb, &q->done_list, done_entry) + vb->state = VB2_BUF_STATE_ERROR; + spin_unlock_irqrestore(&q->done_lock, flags); +} +EXPORT_SYMBOL_GPL(vb2_discard_done); + +/* + * __prepare_mmap() - prepare an MMAP buffer + */ +static int __prepare_mmap(struct vb2_buffer *vb, const void *pb) +{ + int ret = 0; + + if (pb) + ret = call_bufop(vb->vb2_queue, fill_vb2_buffer, + vb, pb, vb->planes); + return ret ? ret : call_vb_qop(vb, buf_prepare, vb); +} + +/* + * __prepare_userptr() - prepare a USERPTR buffer + */ +static int __prepare_userptr(struct vb2_buffer *vb, const void *pb) +{ + struct vb2_plane planes[VB2_MAX_PLANES]; + struct vb2_queue *q = vb->vb2_queue; + void *mem_priv; + unsigned int plane; + int ret = 0; + bool reacquired = vb->planes[0].mem_priv == NULL; + + memset(planes, 0, sizeof(planes[0]) * vb->num_planes); + /* Copy relevant information provided by the userspace */ + if (pb) { + ret = call_bufop(vb->vb2_queue, fill_vb2_buffer, + vb, pb, planes); + if (ret) + return ret; + } + + for (plane = 0; plane < vb->num_planes; ++plane) { + /* Skip the plane if already verified */ + if (vb->planes[plane].m.userptr && + vb->planes[plane].m.userptr == planes[plane].m.userptr + && vb->planes[plane].length == planes[plane].length) + continue; + + dprintk(3, "userspace address for plane %d changed, reacquiring memory\n", + plane); + + /* Check if the provided plane buffer is large enough */ + if (planes[plane].length < vb->planes[plane].min_length) { + dprintk(1, "provided buffer size %u is less than setup size %u for plane %d\n", + planes[plane].length, + vb->planes[plane].min_length, + plane); + ret = -EINVAL; + goto err; + } + + /* Release previously acquired memory if present */ + if (vb->planes[plane].mem_priv) { + if (!reacquired) { + reacquired = true; + call_void_vb_qop(vb, buf_cleanup, vb); + } + call_void_memop(vb, put_userptr, vb->planes[plane].mem_priv); + } + + vb->planes[plane].mem_priv = NULL; + vb->planes[plane].bytesused = 0; + vb->planes[plane].length = 0; + vb->planes[plane].m.userptr = 0; + vb->planes[plane].data_offset = 0; + + /* Acquire each plane's memory */ + mem_priv = call_ptr_memop(vb, get_userptr, + q->alloc_devs[plane] ? : q->dev, + planes[plane].m.userptr, + planes[plane].length, q->dma_dir); + if (IS_ERR(mem_priv)) { + dprintk(1, "failed acquiring userspace memory for plane %d\n", + plane); + ret = PTR_ERR(mem_priv); + goto err; + } + vb->planes[plane].mem_priv = mem_priv; + } + + /* + * Now that everything is in order, copy relevant information + * provided by userspace. + */ + for (plane = 0; plane < vb->num_planes; ++plane) { + vb->planes[plane].bytesused = planes[plane].bytesused; + vb->planes[plane].length = planes[plane].length; + vb->planes[plane].m.userptr = planes[plane].m.userptr; + vb->planes[plane].data_offset = planes[plane].data_offset; + } + + if (reacquired) { + /* + * One or more planes changed, so we must call buf_init to do + * the driver-specific initialization on the newly acquired + * buffer, if provided. + */ + ret = call_vb_qop(vb, buf_init, vb); + if (ret) { + dprintk(1, "buffer initialization failed\n"); + goto err; + } + } + + ret = call_vb_qop(vb, buf_prepare, vb); + if (ret) { + dprintk(1, "buffer preparation failed\n"); + call_void_vb_qop(vb, buf_cleanup, vb); + goto err; + } + + return 0; +err: + /* In case of errors, release planes that were already acquired */ + for (plane = 0; plane < vb->num_planes; ++plane) { + if (vb->planes[plane].mem_priv) + call_void_memop(vb, put_userptr, + vb->planes[plane].mem_priv); + vb->planes[plane].mem_priv = NULL; + vb->planes[plane].m.userptr = 0; + vb->planes[plane].length = 0; + } + + return ret; +} + +/* + * __prepare_dmabuf() - prepare a DMABUF buffer + */ +static int __prepare_dmabuf(struct vb2_buffer *vb, const void *pb) +{ + struct vb2_plane planes[VB2_MAX_PLANES]; + struct vb2_queue *q = vb->vb2_queue; + void *mem_priv; + unsigned int plane; + int ret = 0; + bool reacquired = vb->planes[0].mem_priv == NULL; + + memset(planes, 0, sizeof(planes[0]) * vb->num_planes); + /* Copy relevant information provided by the userspace */ + if (pb) { + ret = call_bufop(vb->vb2_queue, fill_vb2_buffer, + vb, pb, planes); + if (ret) + return ret; + } + + for (plane = 0; plane < vb->num_planes; ++plane) { + struct dma_buf *dbuf = dma_buf_get(planes[plane].m.fd); + + if (IS_ERR_OR_NULL(dbuf)) { + dprintk(1, "invalid dmabuf fd for plane %d\n", + plane); + ret = -EINVAL; + goto err; + } + + /* use DMABUF size if length is not provided */ + if (planes[plane].length == 0) + planes[plane].length = dbuf->size; + + if (planes[plane].length < vb->planes[plane].min_length) { + dprintk(1, "invalid dmabuf length %u for plane %d, minimum length %u\n", + planes[plane].length, plane, + vb->planes[plane].min_length); + dma_buf_put(dbuf); + ret = -EINVAL; + goto err; + } + + /* Skip the plane if already verified */ + if (dbuf == vb->planes[plane].dbuf && + vb->planes[plane].length == planes[plane].length) { + dma_buf_put(dbuf); + continue; + } + + dprintk(3, "buffer for plane %d changed\n", plane); + + if (!reacquired) { + reacquired = true; + call_void_vb_qop(vb, buf_cleanup, vb); + } + + /* Release previously acquired memory if present */ + __vb2_plane_dmabuf_put(vb, &vb->planes[plane]); + vb->planes[plane].bytesused = 0; + vb->planes[plane].length = 0; + vb->planes[plane].m.fd = 0; + vb->planes[plane].data_offset = 0; + + /* Acquire each plane's memory */ + mem_priv = call_ptr_memop(vb, attach_dmabuf, + q->alloc_devs[plane] ? : q->dev, + dbuf, planes[plane].length, q->dma_dir); + if (IS_ERR(mem_priv)) { + dprintk(1, "failed to attach dmabuf\n"); + ret = PTR_ERR(mem_priv); + dma_buf_put(dbuf); + goto err; + } + + vb->planes[plane].dbuf = dbuf; + vb->planes[plane].mem_priv = mem_priv; + } + + /* + * This pins the buffer(s) with dma_buf_map_attachment()). It's done + * here instead just before the DMA, while queueing the buffer(s) so + * userspace knows sooner rather than later if the dma-buf map fails. + */ + for (plane = 0; plane < vb->num_planes; ++plane) { + ret = call_memop(vb, map_dmabuf, vb->planes[plane].mem_priv); + if (ret) { + dprintk(1, "failed to map dmabuf for plane %d\n", + plane); + goto err; + } + vb->planes[plane].dbuf_mapped = 1; + } + + /* + * Now that everything is in order, copy relevant information + * provided by userspace. + */ + for (plane = 0; plane < vb->num_planes; ++plane) { + vb->planes[plane].bytesused = planes[plane].bytesused; + vb->planes[plane].length = planes[plane].length; + vb->planes[plane].m.fd = planes[plane].m.fd; + vb->planes[plane].data_offset = planes[plane].data_offset; + } + + if (reacquired) { + /* + * Call driver-specific initialization on the newly acquired buffer, + * if provided. + */ + ret = call_vb_qop(vb, buf_init, vb); + if (ret) { + dprintk(1, "buffer initialization failed\n"); + goto err; + } + } + + ret = call_vb_qop(vb, buf_prepare, vb); + if (ret) { + dprintk(1, "buffer preparation failed\n"); + call_void_vb_qop(vb, buf_cleanup, vb); + goto err; + } + + return 0; +err: + /* In case of errors, release planes that were already acquired */ + __vb2_buf_dmabuf_put(vb); + + return ret; +} + +/* + * __enqueue_in_driver() - enqueue a vb2_buffer in driver for processing + */ +static void __enqueue_in_driver(struct vb2_buffer *vb) +{ + struct vb2_queue *q = vb->vb2_queue; + + vb->state = VB2_BUF_STATE_ACTIVE; + atomic_inc(&q->owned_by_drv_count); + + trace_vb2_buf_queue(q, vb); + + call_void_vb_qop(vb, buf_queue, vb); +} + +static int __buf_prepare(struct vb2_buffer *vb, const void *pb) +{ + struct vb2_queue *q = vb->vb2_queue; + unsigned int plane; + int ret; + + if (q->error) { + dprintk(1, "fatal error occurred on queue\n"); + return -EIO; + } + + vb->state = VB2_BUF_STATE_PREPARING; + + switch (q->memory) { + case VB2_MEMORY_MMAP: + ret = __prepare_mmap(vb, pb); + break; + case VB2_MEMORY_USERPTR: + ret = __prepare_userptr(vb, pb); + break; + case VB2_MEMORY_DMABUF: + ret = __prepare_dmabuf(vb, pb); + break; + default: + WARN(1, "Invalid queue type\n"); + ret = -EINVAL; + } + + if (ret) { + dprintk(1, "buffer preparation failed: %d\n", ret); + vb->state = VB2_BUF_STATE_DEQUEUED; + return ret; + } + + /* sync buffers */ + for (plane = 0; plane < vb->num_planes; ++plane) + call_void_memop(vb, prepare, vb->planes[plane].mem_priv); + + vb->state = VB2_BUF_STATE_PREPARED; + + return 0; +} + +int vb2_core_prepare_buf(struct vb2_queue *q, unsigned int index, void *pb) +{ + struct vb2_buffer *vb; + int ret; + + vb = q->bufs[index]; + if (vb->state != VB2_BUF_STATE_DEQUEUED) { + dprintk(1, "invalid buffer state %d\n", + vb->state); + return -EINVAL; + } + + ret = __buf_prepare(vb, pb); + if (ret) + return ret; + + /* Fill buffer information for the userspace */ + call_void_bufop(q, fill_user_buffer, vb, pb); + + dprintk(2, "prepare of buffer %d succeeded\n", vb->index); + + return ret; +} +EXPORT_SYMBOL_GPL(vb2_core_prepare_buf); + +/* + * vb2_start_streaming() - Attempt to start streaming. + * @q: videobuf2 queue + * + * Attempt to start streaming. When this function is called there must be + * at least q->min_buffers_needed buffers queued up (i.e. the minimum + * number of buffers required for the DMA engine to function). If the + * @start_streaming op fails it is supposed to return all the driver-owned + * buffers back to vb2 in state QUEUED. Check if that happened and if + * not warn and reclaim them forcefully. + */ +static int vb2_start_streaming(struct vb2_queue *q) +{ + struct vb2_buffer *vb; + int ret; + + /* + * If any buffers were queued before streamon, + * we can now pass them to driver for processing. + */ + list_for_each_entry(vb, &q->queued_list, queued_entry) + __enqueue_in_driver(vb); + + /* Tell the driver to start streaming */ + q->start_streaming_called = 1; + ret = call_qop(q, start_streaming, q, + atomic_read(&q->owned_by_drv_count)); + if (!ret) + return 0; + + q->start_streaming_called = 0; + + dprintk(1, "driver refused to start streaming\n"); + /* + * If you see this warning, then the driver isn't cleaning up properly + * after a failed start_streaming(). See the start_streaming() + * documentation in videobuf2-core.h for more information how buffers + * should be returned to vb2 in start_streaming(). + */ + if (WARN_ON(atomic_read(&q->owned_by_drv_count))) { + unsigned i; + + /* + * Forcefully reclaim buffers if the driver did not + * correctly return them to vb2. + */ + for (i = 0; i < q->num_buffers; ++i) { + vb = q->bufs[i]; + if (vb->state == VB2_BUF_STATE_ACTIVE) + vb2_buffer_done(vb, VB2_BUF_STATE_QUEUED); + } + /* Must be zero now */ + WARN_ON(atomic_read(&q->owned_by_drv_count)); + } + /* + * If done_list is not empty, then start_streaming() didn't call + * vb2_buffer_done(vb, VB2_BUF_STATE_QUEUED) but STATE_ERROR or + * STATE_DONE. + */ + WARN_ON(!list_empty(&q->done_list)); + return ret; +} + +int vb2_core_qbuf(struct vb2_queue *q, unsigned int index, void *pb) +{ + struct vb2_buffer *vb; + int ret; + + vb = q->bufs[index]; + + switch (vb->state) { + case VB2_BUF_STATE_DEQUEUED: + ret = __buf_prepare(vb, pb); + if (ret) + return ret; + break; + case VB2_BUF_STATE_PREPARED: + break; + case VB2_BUF_STATE_PREPARING: + dprintk(1, "buffer still being prepared\n"); + return -EINVAL; + default: + dprintk(1, "invalid buffer state %d\n", vb->state); + return -EINVAL; + } + + /* + * Add to the queued buffers list, a buffer will stay on it until + * dequeued in dqbuf. + */ + list_add_tail(&vb->queued_entry, &q->queued_list); + q->queued_count++; + q->waiting_for_buffers = false; + vb->state = VB2_BUF_STATE_QUEUED; + + if (pb) + call_void_bufop(q, copy_timestamp, vb, pb); + + trace_vb2_qbuf(q, vb); + + /* + * If already streaming, give the buffer to driver for processing. + * If not, the buffer will be given to driver on next streamon. + */ + if (q->start_streaming_called) + __enqueue_in_driver(vb); + + /* Fill buffer information for the userspace */ + if (pb) + call_void_bufop(q, fill_user_buffer, vb, pb); + + /* + * If streamon has been called, and we haven't yet called + * start_streaming() since not enough buffers were queued, and + * we now have reached the minimum number of queued buffers, + * then we can finally call start_streaming(). + */ + if (q->streaming && !q->start_streaming_called && + q->queued_count >= q->min_buffers_needed) { + ret = vb2_start_streaming(q); + if (ret) + return ret; + } + + dprintk(2, "qbuf of buffer %d succeeded\n", vb->index); + return 0; +} +EXPORT_SYMBOL_GPL(vb2_core_qbuf); + +/* + * __vb2_wait_for_done_vb() - wait for a buffer to become available + * for dequeuing + * + * Will sleep if required for nonblocking == false. + */ +static int __vb2_wait_for_done_vb(struct vb2_queue *q, int nonblocking) +{ + /* + * All operations on vb_done_list are performed under done_lock + * spinlock protection. However, buffers may be removed from + * it and returned to userspace only while holding both driver's + * lock and the done_lock spinlock. Thus we can be sure that as + * long as we hold the driver's lock, the list will remain not + * empty if list_empty() check succeeds. + */ + + for (;;) { + int ret; + + if (!q->streaming) { + dprintk(1, "streaming off, will not wait for buffers\n"); + return -EINVAL; + } + + if (q->error) { + dprintk(1, "Queue in error state, will not wait for buffers\n"); + return -EIO; + } + + if (q->last_buffer_dequeued) { + dprintk(3, "last buffer dequeued already, will not wait for buffers\n"); + return -EPIPE; + } + + if (!list_empty(&q->done_list)) { + /* + * Found a buffer that we were waiting for. + */ + break; + } + + if (nonblocking) { + dprintk(3, "nonblocking and no buffers to dequeue, will not wait\n"); + return -EAGAIN; + } + + /* + * We are streaming and blocking, wait for another buffer to + * become ready or for streamoff. Driver's lock is released to + * allow streamoff or qbuf to be called while waiting. + */ + call_void_qop(q, wait_prepare, q); + + /* + * All locks have been released, it is safe to sleep now. + */ + dprintk(3, "will sleep waiting for buffers\n"); + ret = wait_event_interruptible(q->done_wq, + !list_empty(&q->done_list) || !q->streaming || + q->error); + + /* + * We need to reevaluate both conditions again after reacquiring + * the locks or return an error if one occurred. + */ + call_void_qop(q, wait_finish, q); + if (ret) { + dprintk(1, "sleep was interrupted\n"); + return ret; + } + } + return 0; +} + +/* + * __vb2_get_done_vb() - get a buffer ready for dequeuing + * + * Will sleep if required for nonblocking == false. + */ +static int __vb2_get_done_vb(struct vb2_queue *q, struct vb2_buffer **vb, + void *pb, int nonblocking) +{ + unsigned long flags; + int ret = 0; + + /* + * Wait for at least one buffer to become available on the done_list. + */ + ret = __vb2_wait_for_done_vb(q, nonblocking); + if (ret) + return ret; + + /* + * Driver's lock has been held since we last verified that done_list + * is not empty, so no need for another list_empty(done_list) check. + */ + spin_lock_irqsave(&q->done_lock, flags); + *vb = list_first_entry(&q->done_list, struct vb2_buffer, done_entry); + /* + * Only remove the buffer from done_list if all planes can be + * handled. Some cases such as V4L2 file I/O and DVB have pb + * == NULL; skip the check then as there's nothing to verify. + */ + if (pb) + ret = call_bufop(q, verify_planes_array, *vb, pb); + if (!ret) + list_del(&(*vb)->done_entry); + spin_unlock_irqrestore(&q->done_lock, flags); + + return ret; +} + +int vb2_wait_for_all_buffers(struct vb2_queue *q) +{ + if (!q->streaming) { + dprintk(1, "streaming off, will not wait for buffers\n"); + return -EINVAL; + } + + if (q->start_streaming_called) + wait_event(q->done_wq, !atomic_read(&q->owned_by_drv_count)); + return 0; +} +EXPORT_SYMBOL_GPL(vb2_wait_for_all_buffers); + +/* + * __vb2_dqbuf() - bring back the buffer to the DEQUEUED state + */ +static void __vb2_dqbuf(struct vb2_buffer *vb) +{ + struct vb2_queue *q = vb->vb2_queue; + unsigned int i; + + /* nothing to do if the buffer is already dequeued */ + if (vb->state == VB2_BUF_STATE_DEQUEUED) + return; + + vb->state = VB2_BUF_STATE_DEQUEUED; + + /* unmap DMABUF buffer */ + if (q->memory == VB2_MEMORY_DMABUF) + for (i = 0; i < vb->num_planes; ++i) { + if (!vb->planes[i].dbuf_mapped) + continue; + call_void_memop(vb, unmap_dmabuf, vb->planes[i].mem_priv); + vb->planes[i].dbuf_mapped = 0; + } +} + +int vb2_core_dqbuf(struct vb2_queue *q, unsigned int *pindex, void *pb, + bool nonblocking) +{ + struct vb2_buffer *vb = NULL; + int ret; + + ret = __vb2_get_done_vb(q, &vb, pb, nonblocking); + if (ret < 0) + return ret; + + switch (vb->state) { + case VB2_BUF_STATE_DONE: + dprintk(3, "returning done buffer\n"); + break; + case VB2_BUF_STATE_ERROR: + dprintk(3, "returning done buffer with errors\n"); + break; + default: + dprintk(1, "invalid buffer state\n"); + return -EINVAL; + } + + call_void_vb_qop(vb, buf_finish, vb); + + if (pindex) + *pindex = vb->index; + + /* Fill buffer information for the userspace */ + if (pb) + call_void_bufop(q, fill_user_buffer, vb, pb); + + /* Remove from videobuf queue */ + list_del(&vb->queued_entry); + q->queued_count--; + + trace_vb2_dqbuf(q, vb); + + /* go back to dequeued state */ + __vb2_dqbuf(vb); + + dprintk(2, "dqbuf of buffer %d, with state %d\n", + vb->index, vb->state); + + return 0; + +} +EXPORT_SYMBOL_GPL(vb2_core_dqbuf); + +/* + * __vb2_queue_cancel() - cancel and stop (pause) streaming + * + * Removes all queued buffers from driver's queue and all buffers queued by + * userspace from videobuf's queue. Returns to state after reqbufs. + */ +static void __vb2_queue_cancel(struct vb2_queue *q) +{ + unsigned int i; + + /* + * Tell driver to stop all transactions and release all queued + * buffers. + */ + if (q->start_streaming_called) + call_void_qop(q, stop_streaming, q); + + /* + * If you see this warning, then the driver isn't cleaning up properly + * in stop_streaming(). See the stop_streaming() documentation in + * videobuf2-core.h for more information how buffers should be returned + * to vb2 in stop_streaming(). + */ + if (WARN_ON(atomic_read(&q->owned_by_drv_count))) { + for (i = 0; i < q->num_buffers; ++i) + if (q->bufs[i]->state == VB2_BUF_STATE_ACTIVE) { + pr_warn("driver bug: stop_streaming operation is leaving buf %p in active state\n", + q->bufs[i]); + vb2_buffer_done(q->bufs[i], VB2_BUF_STATE_ERROR); + } + /* Must be zero now */ + WARN_ON(atomic_read(&q->owned_by_drv_count)); + } + + q->streaming = 0; + q->start_streaming_called = 0; + q->queued_count = 0; + q->error = 0; + + /* + * Remove all buffers from videobuf's list... + */ + INIT_LIST_HEAD(&q->queued_list); + /* + * ...and done list; userspace will not receive any buffers it + * has not already dequeued before initiating cancel. + */ + INIT_LIST_HEAD(&q->done_list); + atomic_set(&q->owned_by_drv_count, 0); + wake_up_all(&q->done_wq); + + /* + * Reinitialize all buffers for next use. + * Make sure to call buf_finish for any queued buffers. Normally + * that's done in dqbuf, but that's not going to happen when we + * cancel the whole queue. Note: this code belongs here, not in + * __vb2_dqbuf() since in vb2_core_dqbuf() there is a critical + * call to __fill_user_buffer() after buf_finish(). That order can't + * be changed, so we can't move the buf_finish() to __vb2_dqbuf(). + */ + for (i = 0; i < q->num_buffers; ++i) { + struct vb2_buffer *vb = q->bufs[i]; + + if (vb->state != VB2_BUF_STATE_DEQUEUED) { + vb->state = VB2_BUF_STATE_PREPARED; + call_void_vb_qop(vb, buf_finish, vb); + } + __vb2_dqbuf(vb); + } +} + +int vb2_core_streamon(struct vb2_queue *q, unsigned int type) +{ + int ret; + + if (type != q->type) { + dprintk(1, "invalid stream type\n"); + return -EINVAL; + } + + if (q->streaming) { + dprintk(3, "already streaming\n"); + return 0; + } + + if (!q->num_buffers) { + dprintk(1, "no buffers have been allocated\n"); + return -EINVAL; + } + + if (q->num_buffers < q->min_buffers_needed) { + dprintk(1, "need at least %u allocated buffers\n", + q->min_buffers_needed); + return -EINVAL; + } + + /* + * Tell driver to start streaming provided sufficient buffers + * are available. + */ + if (q->queued_count >= q->min_buffers_needed) { + ret = v4l_vb2q_enable_media_source(q); + if (ret) + return ret; + ret = vb2_start_streaming(q); + if (ret) { + __vb2_queue_cancel(q); + return ret; + } + } + + q->streaming = 1; + + dprintk(3, "successful\n"); + return 0; +} +EXPORT_SYMBOL_GPL(vb2_core_streamon); + +void vb2_queue_error(struct vb2_queue *q) +{ + q->error = 1; + + wake_up_all(&q->done_wq); +} +EXPORT_SYMBOL_GPL(vb2_queue_error); + +int vb2_core_streamoff(struct vb2_queue *q, unsigned int type) +{ + if (type != q->type) { + dprintk(1, "invalid stream type\n"); + return -EINVAL; + } + + /* + * Cancel will pause streaming and remove all buffers from the driver + * and videobuf, effectively returning control over them to userspace. + * + * Note that we do this even if q->streaming == 0: if you prepare or + * queue buffers, and then call streamoff without ever having called + * streamon, you would still expect those buffers to be returned to + * their normal dequeued state. + */ + __vb2_queue_cancel(q); + q->waiting_for_buffers = !q->is_output; + q->last_buffer_dequeued = false; + + dprintk(3, "successful\n"); + return 0; +} +EXPORT_SYMBOL_GPL(vb2_core_streamoff); + +/* + * __find_plane_by_offset() - find plane associated with the given offset off + */ +static int __find_plane_by_offset(struct vb2_queue *q, unsigned long off, + unsigned int *_buffer, unsigned int *_plane) +{ + struct vb2_buffer *vb; + unsigned int buffer, plane; + + /* + * Go over all buffers and their planes, comparing the given offset + * with an offset assigned to each plane. If a match is found, + * return its buffer and plane numbers. + */ + for (buffer = 0; buffer < q->num_buffers; ++buffer) { + vb = q->bufs[buffer]; + + for (plane = 0; plane < vb->num_planes; ++plane) { + if (vb->planes[plane].m.offset == off) { + *_buffer = buffer; + *_plane = plane; + return 0; + } + } + } + + return -EINVAL; +} + +int vb2_core_expbuf(struct vb2_queue *q, int *fd, unsigned int type, + unsigned int index, unsigned int plane, unsigned int flags) +{ + struct vb2_buffer *vb = NULL; + struct vb2_plane *vb_plane; + int ret; + struct dma_buf *dbuf; + + if (q->memory != VB2_MEMORY_MMAP) { + dprintk(1, "queue is not currently set up for mmap\n"); + return -EINVAL; + } + + if (!q->mem_ops->get_dmabuf) { + dprintk(1, "queue does not support DMA buffer exporting\n"); + return -EINVAL; + } + + if (flags & ~(O_CLOEXEC | O_ACCMODE)) { + dprintk(1, "queue does support only O_CLOEXEC and access mode flags\n"); + return -EINVAL; + } + + if (type != q->type) { + dprintk(1, "invalid buffer type\n"); + return -EINVAL; + } + + if (index >= q->num_buffers) { + dprintk(1, "buffer index out of range\n"); + return -EINVAL; + } + + vb = q->bufs[index]; + + if (plane >= vb->num_planes) { + dprintk(1, "buffer plane out of range\n"); + return -EINVAL; + } + + if (vb2_fileio_is_active(q)) { + dprintk(1, "expbuf: file io in progress\n"); + return -EBUSY; + } + + vb_plane = &vb->planes[plane]; + + dbuf = call_ptr_memop(vb, get_dmabuf, vb_plane->mem_priv, + flags & O_ACCMODE); + if (IS_ERR_OR_NULL(dbuf)) { + dprintk(1, "failed to export buffer %d, plane %d\n", + index, plane); + return -EINVAL; + } + + ret = dma_buf_fd(dbuf, flags & ~O_ACCMODE); + if (ret < 0) { + dprintk(3, "buffer %d, plane %d failed to export (%d)\n", + index, plane, ret); + dma_buf_put(dbuf); + return ret; + } + + dprintk(3, "buffer %d, plane %d exported as %d descriptor\n", + index, plane, ret); + *fd = ret; + + return 0; +} +EXPORT_SYMBOL_GPL(vb2_core_expbuf); + +int vb2_mmap(struct vb2_queue *q, struct vm_area_struct *vma) +{ + unsigned long off = vma->vm_pgoff << PAGE_SHIFT; + struct vb2_buffer *vb; + unsigned int buffer = 0, plane = 0; + int ret; + unsigned long length; + + if (q->memory != VB2_MEMORY_MMAP) { + dprintk(1, "queue is not currently set up for mmap\n"); + return -EINVAL; + } + + /* + * Check memory area access mode. + */ + if (!(vma->vm_flags & VM_SHARED)) { + dprintk(1, "invalid vma flags, VM_SHARED needed\n"); + return -EINVAL; + } + if (q->is_output) { + if (!(vma->vm_flags & VM_WRITE)) { + dprintk(1, "invalid vma flags, VM_WRITE needed\n"); + return -EINVAL; + } + } else { + if (!(vma->vm_flags & VM_READ)) { + dprintk(1, "invalid vma flags, VM_READ needed\n"); + return -EINVAL; + } + } + if (vb2_fileio_is_active(q)) { + dprintk(1, "mmap: file io in progress\n"); + return -EBUSY; + } + + /* + * Find the plane corresponding to the offset passed by userspace. + */ + ret = __find_plane_by_offset(q, off, &buffer, &plane); + if (ret) + return ret; + + vb = q->bufs[buffer]; + + /* + * MMAP requires page_aligned buffers. + * The buffer length was page_aligned at __vb2_buf_mem_alloc(), + * so, we need to do the same here. + */ + length = PAGE_ALIGN(vb->planes[plane].length); + if (length < (vma->vm_end - vma->vm_start)) { + dprintk(1, + "MMAP invalid, as it would overflow buffer length\n"); + return -EINVAL; + } + + mutex_lock(&q->mmap_lock); + ret = call_memop(vb, mmap, vb->planes[plane].mem_priv, vma); + mutex_unlock(&q->mmap_lock); + if (ret) + return ret; + + dprintk(3, "buffer %d, plane %d successfully mapped\n", buffer, plane); + return 0; +} +EXPORT_SYMBOL_GPL(vb2_mmap); + +#ifndef CONFIG_MMU +unsigned long vb2_get_unmapped_area(struct vb2_queue *q, + unsigned long addr, + unsigned long len, + unsigned long pgoff, + unsigned long flags) +{ + unsigned long off = pgoff << PAGE_SHIFT; + struct vb2_buffer *vb; + unsigned int buffer, plane; + void *vaddr; + int ret; + + if (q->memory != VB2_MEMORY_MMAP) { + dprintk(1, "queue is not currently set up for mmap\n"); + return -EINVAL; + } + + /* + * Find the plane corresponding to the offset passed by userspace. + */ + ret = __find_plane_by_offset(q, off, &buffer, &plane); + if (ret) + return ret; + + vb = q->bufs[buffer]; + + vaddr = vb2_plane_vaddr(vb, plane); + return vaddr ? (unsigned long)vaddr : -EINVAL; +} +EXPORT_SYMBOL_GPL(vb2_get_unmapped_area); +#endif + +int vb2_core_queue_init(struct vb2_queue *q) +{ + /* + * Sanity check + */ + if (WARN_ON(!q) || + WARN_ON(!q->ops) || + WARN_ON(!q->mem_ops) || + WARN_ON(!q->type) || + WARN_ON(!q->io_modes) || + WARN_ON(!q->ops->queue_setup) || + WARN_ON(!q->ops->buf_queue)) + return -EINVAL; + + INIT_LIST_HEAD(&q->queued_list); + INIT_LIST_HEAD(&q->done_list); + spin_lock_init(&q->done_lock); + mutex_init(&q->mmap_lock); + init_waitqueue_head(&q->done_wq); + + q->memory = VB2_MEMORY_UNKNOWN; + + if (q->buf_struct_size == 0) + q->buf_struct_size = sizeof(struct vb2_buffer); + + if (q->bidirectional) + q->dma_dir = DMA_BIDIRECTIONAL; + else + q->dma_dir = q->is_output ? DMA_TO_DEVICE : DMA_FROM_DEVICE; + + return 0; +} +EXPORT_SYMBOL_GPL(vb2_core_queue_init); + +static int __vb2_init_fileio(struct vb2_queue *q, int read); +static int __vb2_cleanup_fileio(struct vb2_queue *q); +void vb2_core_queue_release(struct vb2_queue *q) +{ + __vb2_cleanup_fileio(q); + __vb2_queue_cancel(q); + mutex_lock(&q->mmap_lock); + __vb2_queue_free(q, q->num_buffers); + mutex_unlock(&q->mmap_lock); +} +EXPORT_SYMBOL_GPL(vb2_core_queue_release); + +__poll_t vb2_core_poll(struct vb2_queue *q, struct file *file, + poll_table *wait) +{ + __poll_t req_events = poll_requested_events(wait); + struct vb2_buffer *vb = NULL; + unsigned long flags; + + if (!q->is_output && !(req_events & (POLLIN | POLLRDNORM))) + return 0; + if (q->is_output && !(req_events & (POLLOUT | POLLWRNORM))) + return 0; + + /* + * Start file I/O emulator only if streaming API has not been used yet. + */ + if (q->num_buffers == 0 && !vb2_fileio_is_active(q)) { + if (!q->is_output && (q->io_modes & VB2_READ) && + (req_events & (POLLIN | POLLRDNORM))) { + if (__vb2_init_fileio(q, 1)) + return POLLERR; + } + if (q->is_output && (q->io_modes & VB2_WRITE) && + (req_events & (POLLOUT | POLLWRNORM))) { + if (__vb2_init_fileio(q, 0)) + return POLLERR; + /* + * Write to OUTPUT queue can be done immediately. + */ + return POLLOUT | POLLWRNORM; + } + } + + /* + * There is nothing to wait for if the queue isn't streaming, or if the + * error flag is set. + */ + if (!vb2_is_streaming(q) || q->error) + return POLLERR; + + /* + * If this quirk is set and QBUF hasn't been called yet then + * return POLLERR as well. This only affects capture queues, output + * queues will always initialize waiting_for_buffers to false. + * This quirk is set by V4L2 for backwards compatibility reasons. + */ + if (q->quirk_poll_must_check_waiting_for_buffers && + q->waiting_for_buffers && (req_events & (POLLIN | POLLRDNORM))) + return POLLERR; + + /* + * For output streams you can call write() as long as there are fewer + * buffers queued than there are buffers available. + */ + if (q->is_output && q->fileio && q->queued_count < q->num_buffers) + return POLLOUT | POLLWRNORM; + + if (list_empty(&q->done_list)) { + /* + * If the last buffer was dequeued from a capture queue, + * return immediately. DQBUF will return -EPIPE. + */ + if (q->last_buffer_dequeued) + return POLLIN | POLLRDNORM; + + poll_wait(file, &q->done_wq, wait); + } + + /* + * Take first buffer available for dequeuing. + */ + spin_lock_irqsave(&q->done_lock, flags); + if (!list_empty(&q->done_list)) + vb = list_first_entry(&q->done_list, struct vb2_buffer, + done_entry); + spin_unlock_irqrestore(&q->done_lock, flags); + + if (vb && (vb->state == VB2_BUF_STATE_DONE + || vb->state == VB2_BUF_STATE_ERROR)) { + return (q->is_output) ? + POLLOUT | POLLWRNORM : + POLLIN | POLLRDNORM; + } + return 0; +} +EXPORT_SYMBOL_GPL(vb2_core_poll); + +/* + * struct vb2_fileio_buf - buffer context used by file io emulator + * + * vb2 provides a compatibility layer and emulator of file io (read and + * write) calls on top of streaming API. This structure is used for + * tracking context related to the buffers. + */ +struct vb2_fileio_buf { + void *vaddr; + unsigned int size; + unsigned int pos; + unsigned int queued:1; +}; + +/* + * struct vb2_fileio_data - queue context used by file io emulator + * + * @cur_index: the index of the buffer currently being read from or + * written to. If equal to q->num_buffers then a new buffer + * must be dequeued. + * @initial_index: in the read() case all buffers are queued up immediately + * in __vb2_init_fileio() and __vb2_perform_fileio() just cycles + * buffers. However, in the write() case no buffers are initially + * queued, instead whenever a buffer is full it is queued up by + * __vb2_perform_fileio(). Only once all available buffers have + * been queued up will __vb2_perform_fileio() start to dequeue + * buffers. This means that initially __vb2_perform_fileio() + * needs to know what buffer index to use when it is queuing up + * the buffers for the first time. That initial index is stored + * in this field. Once it is equal to q->num_buffers all + * available buffers have been queued and __vb2_perform_fileio() + * should start the normal dequeue/queue cycle. + * + * vb2 provides a compatibility layer and emulator of file io (read and + * write) calls on top of streaming API. For proper operation it required + * this structure to save the driver state between each call of the read + * or write function. + */ +struct vb2_fileio_data { + unsigned int count; + unsigned int type; + unsigned int memory; + struct vb2_fileio_buf bufs[VB2_MAX_FRAME]; + unsigned int cur_index; + unsigned int initial_index; + unsigned int q_count; + unsigned int dq_count; + unsigned read_once:1; + unsigned write_immediately:1; +}; + +/* + * __vb2_init_fileio() - initialize file io emulator + * @q: videobuf2 queue + * @read: mode selector (1 means read, 0 means write) + */ +static int __vb2_init_fileio(struct vb2_queue *q, int read) +{ + struct vb2_fileio_data *fileio; + int i, ret; + unsigned int count = 0; + + /* + * Sanity check + */ + if (WARN_ON((read && !(q->io_modes & VB2_READ)) || + (!read && !(q->io_modes & VB2_WRITE)))) + return -EINVAL; + + /* + * Check if device supports mapping buffers to kernel virtual space. + */ + if (!q->mem_ops->vaddr) + return -EBUSY; + + /* + * Check if streaming api has not been already activated. + */ + if (q->streaming || q->num_buffers > 0) + return -EBUSY; + + /* + * Start with count 1, driver can increase it in queue_setup() + */ + count = 1; + + dprintk(3, "setting up file io: mode %s, count %d, read_once %d, write_immediately %d\n", + (read) ? "read" : "write", count, q->fileio_read_once, + q->fileio_write_immediately); + + fileio = kzalloc(sizeof(*fileio), GFP_KERNEL); + if (fileio == NULL) + return -ENOMEM; + + fileio->read_once = q->fileio_read_once; + fileio->write_immediately = q->fileio_write_immediately; + + /* + * Request buffers and use MMAP type to force driver + * to allocate buffers by itself. + */ + fileio->count = count; + fileio->memory = VB2_MEMORY_MMAP; + fileio->type = q->type; + q->fileio = fileio; + ret = vb2_core_reqbufs(q, fileio->memory, &fileio->count); + if (ret) + goto err_kfree; + + /* + * Check if plane_count is correct + * (multiplane buffers are not supported). + */ + if (q->bufs[0]->num_planes != 1) { + ret = -EBUSY; + goto err_reqbufs; + } + + /* + * Get kernel address of each buffer. + */ + for (i = 0; i < q->num_buffers; i++) { + fileio->bufs[i].vaddr = vb2_plane_vaddr(q->bufs[i], 0); + if (fileio->bufs[i].vaddr == NULL) { + ret = -EINVAL; + goto err_reqbufs; + } + fileio->bufs[i].size = vb2_plane_size(q->bufs[i], 0); + } + + /* + * Read mode requires pre queuing of all buffers. + */ + if (read) { + /* + * Queue all buffers. + */ + for (i = 0; i < q->num_buffers; i++) { + ret = vb2_core_qbuf(q, i, NULL); + if (ret) + goto err_reqbufs; + fileio->bufs[i].queued = 1; + } + /* + * All buffers have been queued, so mark that by setting + * initial_index to q->num_buffers + */ + fileio->initial_index = q->num_buffers; + fileio->cur_index = q->num_buffers; + } + + /* + * Start streaming. + */ + ret = vb2_core_streamon(q, q->type); + if (ret) + goto err_reqbufs; + + return ret; + +err_reqbufs: + fileio->count = 0; + vb2_core_reqbufs(q, fileio->memory, &fileio->count); + +err_kfree: + q->fileio = NULL; + kfree(fileio); + return ret; +} + +/* + * __vb2_cleanup_fileio() - free resourced used by file io emulator + * @q: videobuf2 queue + */ +static int __vb2_cleanup_fileio(struct vb2_queue *q) +{ + struct vb2_fileio_data *fileio = q->fileio; + + if (fileio) { + vb2_core_streamoff(q, q->type); + q->fileio = NULL; + fileio->count = 0; + vb2_core_reqbufs(q, fileio->memory, &fileio->count); + kfree(fileio); + dprintk(3, "file io emulator closed\n"); + } + return 0; +} + +/* + * __vb2_perform_fileio() - perform a single file io (read or write) operation + * @q: videobuf2 queue + * @data: pointed to target userspace buffer + * @count: number of bytes to read or write + * @ppos: file handle position tracking pointer + * @nonblock: mode selector (1 means blocking calls, 0 means nonblocking) + * @read: access mode selector (1 means read, 0 means write) + */ +static size_t __vb2_perform_fileio(struct vb2_queue *q, char __user *data, size_t count, + loff_t *ppos, int nonblock, int read) +{ + struct vb2_fileio_data *fileio; + struct vb2_fileio_buf *buf; + bool is_multiplanar = q->is_multiplanar; + /* + * When using write() to write data to an output video node the vb2 core + * should copy timestamps if V4L2_BUF_FLAG_TIMESTAMP_COPY is set. Nobody + * else is able to provide this information with the write() operation. + */ + bool copy_timestamp = !read && q->copy_timestamp; + unsigned index; + int ret; + + dprintk(3, "mode %s, offset %ld, count %zd, %sblocking\n", + read ? "read" : "write", (long)*ppos, count, + nonblock ? "non" : ""); + + if (!data) + return -EINVAL; + + /* + * Initialize emulator on first call. + */ + if (!vb2_fileio_is_active(q)) { + ret = __vb2_init_fileio(q, read); + dprintk(3, "vb2_init_fileio result: %d\n", ret); + if (ret) + return ret; + } + fileio = q->fileio; + + /* + * Check if we need to dequeue the buffer. + */ + index = fileio->cur_index; + if (index >= q->num_buffers) { + struct vb2_buffer *b; + + /* + * Call vb2_dqbuf to get buffer back. + */ + ret = vb2_core_dqbuf(q, &index, NULL, nonblock); + dprintk(5, "vb2_dqbuf result: %d\n", ret); + if (ret) + return ret; + fileio->dq_count += 1; + + fileio->cur_index = index; + buf = &fileio->bufs[index]; + b = q->bufs[index]; + + /* + * Get number of bytes filled by the driver + */ + buf->pos = 0; + buf->queued = 0; + buf->size = read ? vb2_get_plane_payload(q->bufs[index], 0) + : vb2_plane_size(q->bufs[index], 0); + /* Compensate for data_offset on read in the multiplanar case. */ + if (is_multiplanar && read && + b->planes[0].data_offset < buf->size) { + buf->pos = b->planes[0].data_offset; + buf->size -= buf->pos; + } + } else { + buf = &fileio->bufs[index]; + } + + /* + * Limit count on last few bytes of the buffer. + */ + if (buf->pos + count > buf->size) { + count = buf->size - buf->pos; + dprintk(5, "reducing read count: %zd\n", count); + } + + /* + * Transfer data to userspace. + */ + dprintk(3, "copying %zd bytes - buffer %d, offset %u\n", + count, index, buf->pos); + if (read) + ret = copy_to_user(data, buf->vaddr + buf->pos, count); + else + ret = copy_from_user(buf->vaddr + buf->pos, data, count); + if (ret) { + dprintk(3, "error copying data\n"); + return -EFAULT; + } + + /* + * Update counters. + */ + buf->pos += count; + *ppos += count; + + /* + * Queue next buffer if required. + */ + if (buf->pos == buf->size || (!read && fileio->write_immediately)) { + struct vb2_buffer *b = q->bufs[index]; + + /* + * Check if this is the last buffer to read. + */ + if (read && fileio->read_once && fileio->dq_count == 1) { + dprintk(3, "read limit reached\n"); + return __vb2_cleanup_fileio(q); + } + + /* + * Call vb2_qbuf and give buffer to the driver. + */ + b->planes[0].bytesused = buf->pos; + + if (copy_timestamp) + b->timestamp = ktime_get_ns(); + ret = vb2_core_qbuf(q, index, NULL); + dprintk(5, "vb2_dbuf result: %d\n", ret); + if (ret) + return ret; + + /* + * Buffer has been queued, update the status + */ + buf->pos = 0; + buf->queued = 1; + buf->size = vb2_plane_size(q->bufs[index], 0); + fileio->q_count += 1; + /* + * If we are queuing up buffers for the first time, then + * increase initial_index by one. + */ + if (fileio->initial_index < q->num_buffers) + fileio->initial_index++; + /* + * The next buffer to use is either a buffer that's going to be + * queued for the first time (initial_index < q->num_buffers) + * or it is equal to q->num_buffers, meaning that the next + * time we need to dequeue a buffer since we've now queued up + * all the 'first time' buffers. + */ + fileio->cur_index = fileio->initial_index; + } + + /* + * Return proper number of bytes processed. + */ + if (ret == 0) + ret = count; + return ret; +} + +size_t vb2_read(struct vb2_queue *q, char __user *data, size_t count, + loff_t *ppos, int nonblocking) +{ + return __vb2_perform_fileio(q, data, count, ppos, nonblocking, 1); +} +EXPORT_SYMBOL_GPL(vb2_read); + +size_t vb2_write(struct vb2_queue *q, const char __user *data, size_t count, + loff_t *ppos, int nonblocking) +{ + return __vb2_perform_fileio(q, (char __user *) data, count, + ppos, nonblocking, 0); +} +EXPORT_SYMBOL_GPL(vb2_write); + +struct vb2_threadio_data { + struct task_struct *thread; + vb2_thread_fnc fnc; + void *priv; + bool stop; +}; + +static int vb2_thread(void *data) +{ + struct vb2_queue *q = data; + struct vb2_threadio_data *threadio = q->threadio; + bool copy_timestamp = false; + unsigned prequeue = 0; + unsigned index = 0; + int ret = 0; + + if (q->is_output) { + prequeue = q->num_buffers; + copy_timestamp = q->copy_timestamp; + } + + set_freezable(); + + for (;;) { + struct vb2_buffer *vb; + + /* + * Call vb2_dqbuf to get buffer back. + */ + if (prequeue) { + vb = q->bufs[index++]; + prequeue--; + } else { + call_void_qop(q, wait_finish, q); + if (!threadio->stop) + ret = vb2_core_dqbuf(q, &index, NULL, 0); + call_void_qop(q, wait_prepare, q); + dprintk(5, "file io: vb2_dqbuf result: %d\n", ret); + if (!ret) + vb = q->bufs[index]; + } + if (ret || threadio->stop) + break; + try_to_freeze(); + + if (vb->state != VB2_BUF_STATE_ERROR) + if (threadio->fnc(vb, threadio->priv)) + break; + call_void_qop(q, wait_finish, q); + if (copy_timestamp) + vb->timestamp = ktime_get_ns(); + if (!threadio->stop) + ret = vb2_core_qbuf(q, vb->index, NULL); + call_void_qop(q, wait_prepare, q); + if (ret || threadio->stop) + break; + } + + /* Hmm, linux becomes *very* unhappy without this ... */ + while (!kthread_should_stop()) { + set_current_state(TASK_INTERRUPTIBLE); + schedule(); + } + return 0; +} + +/* + * This function should not be used for anything else but the videobuf2-dvb + * support. If you think you have another good use-case for this, then please + * contact the linux-media mailinglist first. + */ +int vb2_thread_start(struct vb2_queue *q, vb2_thread_fnc fnc, void *priv, + const char *thread_name) +{ + struct vb2_threadio_data *threadio; + int ret = 0; + + if (q->threadio) + return -EBUSY; + if (vb2_is_busy(q)) + return -EBUSY; + if (WARN_ON(q->fileio)) + return -EBUSY; + + threadio = kzalloc(sizeof(*threadio), GFP_KERNEL); + if (threadio == NULL) + return -ENOMEM; + threadio->fnc = fnc; + threadio->priv = priv; + + ret = __vb2_init_fileio(q, !q->is_output); + dprintk(3, "file io: vb2_init_fileio result: %d\n", ret); + if (ret) + goto nomem; + q->threadio = threadio; + threadio->thread = kthread_run(vb2_thread, q, "vb2-%s", thread_name); + if (IS_ERR(threadio->thread)) { + ret = PTR_ERR(threadio->thread); + threadio->thread = NULL; + goto nothread; + } + return 0; + +nothread: + __vb2_cleanup_fileio(q); +nomem: + kfree(threadio); + return ret; +} +EXPORT_SYMBOL_GPL(vb2_thread_start); + +int vb2_thread_stop(struct vb2_queue *q) +{ + struct vb2_threadio_data *threadio = q->threadio; + int err; + + if (threadio == NULL) + return 0; + threadio->stop = true; + /* Wake up all pending sleeps in the thread */ + vb2_queue_error(q); + err = kthread_stop(threadio->thread); + __vb2_cleanup_fileio(q); + threadio->thread = NULL; + kfree(threadio); + q->threadio = NULL; + return err; +} +EXPORT_SYMBOL_GPL(vb2_thread_stop); + +MODULE_DESCRIPTION("Media buffer core framework"); +MODULE_AUTHOR("Pawel Osciak <pawel@osciak.com>, Marek Szyprowski"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/common/videobuf2/videobuf2-dma-contig.c b/drivers/media/common/videobuf2/videobuf2-dma-contig.c new file mode 100644 index 000000000000..f1178f6f434d --- /dev/null +++ b/drivers/media/common/videobuf2/videobuf2-dma-contig.c @@ -0,0 +1,787 @@ +/* + * videobuf2-dma-contig.c - DMA contig memory allocator for videobuf2 + * + * Copyright (C) 2010 Samsung Electronics + * + * Author: Pawel Osciak <pawel@osciak.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + */ + +#include <linux/dma-buf.h> +#include <linux/module.h> +#include <linux/refcount.h> +#include <linux/scatterlist.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/dma-mapping.h> + +#include <media/videobuf2-v4l2.h> +#include <media/videobuf2-dma-contig.h> +#include <media/videobuf2-memops.h> + +struct vb2_dc_buf { + struct device *dev; + void *vaddr; + unsigned long size; + void *cookie; + dma_addr_t dma_addr; + unsigned long attrs; + enum dma_data_direction dma_dir; + struct sg_table *dma_sgt; + struct frame_vector *vec; + + /* MMAP related */ + struct vb2_vmarea_handler handler; + refcount_t refcount; + struct sg_table *sgt_base; + + /* DMABUF related */ + struct dma_buf_attachment *db_attach; +}; + +/*********************************************/ +/* scatterlist table functions */ +/*********************************************/ + +static unsigned long vb2_dc_get_contiguous_size(struct sg_table *sgt) +{ + struct scatterlist *s; + dma_addr_t expected = sg_dma_address(sgt->sgl); + unsigned int i; + unsigned long size = 0; + + for_each_sg(sgt->sgl, s, sgt->nents, i) { + if (sg_dma_address(s) != expected) + break; + expected = sg_dma_address(s) + sg_dma_len(s); + size += sg_dma_len(s); + } + return size; +} + +/*********************************************/ +/* callbacks for all buffers */ +/*********************************************/ + +static void *vb2_dc_cookie(void *buf_priv) +{ + struct vb2_dc_buf *buf = buf_priv; + + return &buf->dma_addr; +} + +static void *vb2_dc_vaddr(void *buf_priv) +{ + struct vb2_dc_buf *buf = buf_priv; + + if (!buf->vaddr && buf->db_attach) + buf->vaddr = dma_buf_vmap(buf->db_attach->dmabuf); + + return buf->vaddr; +} + +static unsigned int vb2_dc_num_users(void *buf_priv) +{ + struct vb2_dc_buf *buf = buf_priv; + + return refcount_read(&buf->refcount); +} + +static void vb2_dc_prepare(void *buf_priv) +{ + struct vb2_dc_buf *buf = buf_priv; + struct sg_table *sgt = buf->dma_sgt; + + /* DMABUF exporter will flush the cache for us */ + if (!sgt || buf->db_attach) + return; + + dma_sync_sg_for_device(buf->dev, sgt->sgl, sgt->orig_nents, + buf->dma_dir); +} + +static void vb2_dc_finish(void *buf_priv) +{ + struct vb2_dc_buf *buf = buf_priv; + struct sg_table *sgt = buf->dma_sgt; + + /* DMABUF exporter will flush the cache for us */ + if (!sgt || buf->db_attach) + return; + + dma_sync_sg_for_cpu(buf->dev, sgt->sgl, sgt->orig_nents, buf->dma_dir); +} + +/*********************************************/ +/* callbacks for MMAP buffers */ +/*********************************************/ + +static void vb2_dc_put(void *buf_priv) +{ + struct vb2_dc_buf *buf = buf_priv; + + if (!refcount_dec_and_test(&buf->refcount)) + return; + + if (buf->sgt_base) { + sg_free_table(buf->sgt_base); + kfree(buf->sgt_base); + } + dma_free_attrs(buf->dev, buf->size, buf->cookie, buf->dma_addr, + buf->attrs); + put_device(buf->dev); + kfree(buf); +} + +static void *vb2_dc_alloc(struct device *dev, unsigned long attrs, + unsigned long size, enum dma_data_direction dma_dir, + gfp_t gfp_flags) +{ + struct vb2_dc_buf *buf; + + if (WARN_ON(!dev)) + return ERR_PTR(-EINVAL); + + buf = kzalloc(sizeof *buf, GFP_KERNEL); + if (!buf) + return ERR_PTR(-ENOMEM); + + if (attrs) + buf->attrs = attrs; + buf->cookie = dma_alloc_attrs(dev, size, &buf->dma_addr, + GFP_KERNEL | gfp_flags, buf->attrs); + if (!buf->cookie) { + dev_err(dev, "dma_alloc_coherent of size %ld failed\n", size); + kfree(buf); + return ERR_PTR(-ENOMEM); + } + + if ((buf->attrs & DMA_ATTR_NO_KERNEL_MAPPING) == 0) + buf->vaddr = buf->cookie; + + /* Prevent the device from being released while the buffer is used */ + buf->dev = get_device(dev); + buf->size = size; + buf->dma_dir = dma_dir; + + buf->handler.refcount = &buf->refcount; + buf->handler.put = vb2_dc_put; + buf->handler.arg = buf; + + refcount_set(&buf->refcount, 1); + + return buf; +} + +static int vb2_dc_mmap(void *buf_priv, struct vm_area_struct *vma) +{ + struct vb2_dc_buf *buf = buf_priv; + int ret; + + if (!buf) { + printk(KERN_ERR "No buffer to map\n"); + return -EINVAL; + } + + /* + * dma_mmap_* uses vm_pgoff as in-buffer offset, but we want to + * map whole buffer + */ + vma->vm_pgoff = 0; + + ret = dma_mmap_attrs(buf->dev, vma, buf->cookie, + buf->dma_addr, buf->size, buf->attrs); + + if (ret) { + pr_err("Remapping memory failed, error: %d\n", ret); + return ret; + } + + vma->vm_flags |= VM_DONTEXPAND | VM_DONTDUMP; + vma->vm_private_data = &buf->handler; + vma->vm_ops = &vb2_common_vm_ops; + + vma->vm_ops->open(vma); + + pr_debug("%s: mapped dma addr 0x%08lx at 0x%08lx, size %ld\n", + __func__, (unsigned long)buf->dma_addr, vma->vm_start, + buf->size); + + return 0; +} + +/*********************************************/ +/* DMABUF ops for exporters */ +/*********************************************/ + +struct vb2_dc_attachment { + struct sg_table sgt; + enum dma_data_direction dma_dir; +}; + +static int vb2_dc_dmabuf_ops_attach(struct dma_buf *dbuf, struct device *dev, + struct dma_buf_attachment *dbuf_attach) +{ + struct vb2_dc_attachment *attach; + unsigned int i; + struct scatterlist *rd, *wr; + struct sg_table *sgt; + struct vb2_dc_buf *buf = dbuf->priv; + int ret; + + attach = kzalloc(sizeof(*attach), GFP_KERNEL); + if (!attach) + return -ENOMEM; + + sgt = &attach->sgt; + /* Copy the buf->base_sgt scatter list to the attachment, as we can't + * map the same scatter list to multiple attachments at the same time. + */ + ret = sg_alloc_table(sgt, buf->sgt_base->orig_nents, GFP_KERNEL); + if (ret) { + kfree(attach); + return -ENOMEM; + } + + rd = buf->sgt_base->sgl; + wr = sgt->sgl; + for (i = 0; i < sgt->orig_nents; ++i) { + sg_set_page(wr, sg_page(rd), rd->length, rd->offset); + rd = sg_next(rd); + wr = sg_next(wr); + } + + attach->dma_dir = DMA_NONE; + dbuf_attach->priv = attach; + + return 0; +} + +static void vb2_dc_dmabuf_ops_detach(struct dma_buf *dbuf, + struct dma_buf_attachment *db_attach) +{ + struct vb2_dc_attachment *attach = db_attach->priv; + struct sg_table *sgt; + + if (!attach) + return; + + sgt = &attach->sgt; + + /* release the scatterlist cache */ + if (attach->dma_dir != DMA_NONE) + dma_unmap_sg(db_attach->dev, sgt->sgl, sgt->orig_nents, + attach->dma_dir); + sg_free_table(sgt); + kfree(attach); + db_attach->priv = NULL; +} + +static struct sg_table *vb2_dc_dmabuf_ops_map( + struct dma_buf_attachment *db_attach, enum dma_data_direction dma_dir) +{ + struct vb2_dc_attachment *attach = db_attach->priv; + /* stealing dmabuf mutex to serialize map/unmap operations */ + struct mutex *lock = &db_attach->dmabuf->lock; + struct sg_table *sgt; + + mutex_lock(lock); + + sgt = &attach->sgt; + /* return previously mapped sg table */ + if (attach->dma_dir == dma_dir) { + mutex_unlock(lock); + return sgt; + } + + /* release any previous cache */ + if (attach->dma_dir != DMA_NONE) { + dma_unmap_sg(db_attach->dev, sgt->sgl, sgt->orig_nents, + attach->dma_dir); + attach->dma_dir = DMA_NONE; + } + + /* mapping to the client with new direction */ + sgt->nents = dma_map_sg(db_attach->dev, sgt->sgl, sgt->orig_nents, + dma_dir); + if (!sgt->nents) { + pr_err("failed to map scatterlist\n"); + mutex_unlock(lock); + return ERR_PTR(-EIO); + } + + attach->dma_dir = dma_dir; + + mutex_unlock(lock); + + return sgt; +} + +static void vb2_dc_dmabuf_ops_unmap(struct dma_buf_attachment *db_attach, + struct sg_table *sgt, enum dma_data_direction dma_dir) +{ + /* nothing to be done here */ +} + +static void vb2_dc_dmabuf_ops_release(struct dma_buf *dbuf) +{ + /* drop reference obtained in vb2_dc_get_dmabuf */ + vb2_dc_put(dbuf->priv); +} + +static void *vb2_dc_dmabuf_ops_kmap(struct dma_buf *dbuf, unsigned long pgnum) +{ + struct vb2_dc_buf *buf = dbuf->priv; + + return buf->vaddr ? buf->vaddr + pgnum * PAGE_SIZE : NULL; +} + +static void *vb2_dc_dmabuf_ops_vmap(struct dma_buf *dbuf) +{ + struct vb2_dc_buf *buf = dbuf->priv; + + return buf->vaddr; +} + +static int vb2_dc_dmabuf_ops_mmap(struct dma_buf *dbuf, + struct vm_area_struct *vma) +{ + return vb2_dc_mmap(dbuf->priv, vma); +} + +static const struct dma_buf_ops vb2_dc_dmabuf_ops = { + .attach = vb2_dc_dmabuf_ops_attach, + .detach = vb2_dc_dmabuf_ops_detach, + .map_dma_buf = vb2_dc_dmabuf_ops_map, + .unmap_dma_buf = vb2_dc_dmabuf_ops_unmap, + .map = vb2_dc_dmabuf_ops_kmap, + .map_atomic = vb2_dc_dmabuf_ops_kmap, + .vmap = vb2_dc_dmabuf_ops_vmap, + .mmap = vb2_dc_dmabuf_ops_mmap, + .release = vb2_dc_dmabuf_ops_release, +}; + +static struct sg_table *vb2_dc_get_base_sgt(struct vb2_dc_buf *buf) +{ + int ret; + struct sg_table *sgt; + + sgt = kmalloc(sizeof(*sgt), GFP_KERNEL); + if (!sgt) { + dev_err(buf->dev, "failed to alloc sg table\n"); + return NULL; + } + + ret = dma_get_sgtable_attrs(buf->dev, sgt, buf->cookie, buf->dma_addr, + buf->size, buf->attrs); + if (ret < 0) { + dev_err(buf->dev, "failed to get scatterlist from DMA API\n"); + kfree(sgt); + return NULL; + } + + return sgt; +} + +static struct dma_buf *vb2_dc_get_dmabuf(void *buf_priv, unsigned long flags) +{ + struct vb2_dc_buf *buf = buf_priv; + struct dma_buf *dbuf; + DEFINE_DMA_BUF_EXPORT_INFO(exp_info); + + exp_info.ops = &vb2_dc_dmabuf_ops; + exp_info.size = buf->size; + exp_info.flags = flags; + exp_info.priv = buf; + + if (!buf->sgt_base) + buf->sgt_base = vb2_dc_get_base_sgt(buf); + + if (WARN_ON(!buf->sgt_base)) + return NULL; + + dbuf = dma_buf_export(&exp_info); + if (IS_ERR(dbuf)) + return NULL; + + /* dmabuf keeps reference to vb2 buffer */ + refcount_inc(&buf->refcount); + + return dbuf; +} + +/*********************************************/ +/* callbacks for USERPTR buffers */ +/*********************************************/ + +static void vb2_dc_put_userptr(void *buf_priv) +{ + struct vb2_dc_buf *buf = buf_priv; + struct sg_table *sgt = buf->dma_sgt; + int i; + struct page **pages; + + if (sgt) { + /* + * No need to sync to CPU, it's already synced to the CPU + * since the finish() memop will have been called before this. + */ + dma_unmap_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents, + buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC); + pages = frame_vector_pages(buf->vec); + /* sgt should exist only if vector contains pages... */ + BUG_ON(IS_ERR(pages)); + if (buf->dma_dir == DMA_FROM_DEVICE || + buf->dma_dir == DMA_BIDIRECTIONAL) + for (i = 0; i < frame_vector_count(buf->vec); i++) + set_page_dirty_lock(pages[i]); + sg_free_table(sgt); + kfree(sgt); + } + vb2_destroy_framevec(buf->vec); + kfree(buf); +} + +/* + * For some kind of reserved memory there might be no struct page available, + * so all that can be done to support such 'pages' is to try to convert + * pfn to dma address or at the last resort just assume that + * dma address == physical address (like it has been assumed in earlier version + * of videobuf2-dma-contig + */ + +#ifdef __arch_pfn_to_dma +static inline dma_addr_t vb2_dc_pfn_to_dma(struct device *dev, unsigned long pfn) +{ + return (dma_addr_t)__arch_pfn_to_dma(dev, pfn); +} +#elif defined(__pfn_to_bus) +static inline dma_addr_t vb2_dc_pfn_to_dma(struct device *dev, unsigned long pfn) +{ + return (dma_addr_t)__pfn_to_bus(pfn); +} +#elif defined(__pfn_to_phys) +static inline dma_addr_t vb2_dc_pfn_to_dma(struct device *dev, unsigned long pfn) +{ + return (dma_addr_t)__pfn_to_phys(pfn); +} +#else +static inline dma_addr_t vb2_dc_pfn_to_dma(struct device *dev, unsigned long pfn) +{ + /* really, we cannot do anything better at this point */ + return (dma_addr_t)(pfn) << PAGE_SHIFT; +} +#endif + +static void *vb2_dc_get_userptr(struct device *dev, unsigned long vaddr, + unsigned long size, enum dma_data_direction dma_dir) +{ + struct vb2_dc_buf *buf; + struct frame_vector *vec; + unsigned int offset; + int n_pages, i; + int ret = 0; + struct sg_table *sgt; + unsigned long contig_size; + unsigned long dma_align = dma_get_cache_alignment(); + + /* Only cache aligned DMA transfers are reliable */ + if (!IS_ALIGNED(vaddr | size, dma_align)) { + pr_debug("user data must be aligned to %lu bytes\n", dma_align); + return ERR_PTR(-EINVAL); + } + + if (!size) { + pr_debug("size is zero\n"); + return ERR_PTR(-EINVAL); + } + + if (WARN_ON(!dev)) + return ERR_PTR(-EINVAL); + + buf = kzalloc(sizeof *buf, GFP_KERNEL); + if (!buf) + return ERR_PTR(-ENOMEM); + + buf->dev = dev; + buf->dma_dir = dma_dir; + + offset = lower_32_bits(offset_in_page(vaddr)); + vec = vb2_create_framevec(vaddr, size, dma_dir == DMA_FROM_DEVICE || + dma_dir == DMA_BIDIRECTIONAL); + if (IS_ERR(vec)) { + ret = PTR_ERR(vec); + goto fail_buf; + } + buf->vec = vec; + n_pages = frame_vector_count(vec); + ret = frame_vector_to_pages(vec); + if (ret < 0) { + unsigned long *nums = frame_vector_pfns(vec); + + /* + * Failed to convert to pages... Check the memory is physically + * contiguous and use direct mapping + */ + for (i = 1; i < n_pages; i++) + if (nums[i-1] + 1 != nums[i]) + goto fail_pfnvec; + buf->dma_addr = vb2_dc_pfn_to_dma(buf->dev, nums[0]); + goto out; + } + + sgt = kzalloc(sizeof(*sgt), GFP_KERNEL); + if (!sgt) { + pr_err("failed to allocate sg table\n"); + ret = -ENOMEM; + goto fail_pfnvec; + } + + ret = sg_alloc_table_from_pages(sgt, frame_vector_pages(vec), n_pages, + offset, size, GFP_KERNEL); + if (ret) { + pr_err("failed to initialize sg table\n"); + goto fail_sgt; + } + + /* + * No need to sync to the device, this will happen later when the + * prepare() memop is called. + */ + sgt->nents = dma_map_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents, + buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC); + if (sgt->nents <= 0) { + pr_err("failed to map scatterlist\n"); + ret = -EIO; + goto fail_sgt_init; + } + + contig_size = vb2_dc_get_contiguous_size(sgt); + if (contig_size < size) { + pr_err("contiguous mapping is too small %lu/%lu\n", + contig_size, size); + ret = -EFAULT; + goto fail_map_sg; + } + + buf->dma_addr = sg_dma_address(sgt->sgl); + buf->dma_sgt = sgt; +out: + buf->size = size; + + return buf; + +fail_map_sg: + dma_unmap_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents, + buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC); + +fail_sgt_init: + sg_free_table(sgt); + +fail_sgt: + kfree(sgt); + +fail_pfnvec: + vb2_destroy_framevec(vec); + +fail_buf: + kfree(buf); + + return ERR_PTR(ret); +} + +/*********************************************/ +/* callbacks for DMABUF buffers */ +/*********************************************/ + +static int vb2_dc_map_dmabuf(void *mem_priv) +{ + struct vb2_dc_buf *buf = mem_priv; + struct sg_table *sgt; + unsigned long contig_size; + + if (WARN_ON(!buf->db_attach)) { + pr_err("trying to pin a non attached buffer\n"); + return -EINVAL; + } + + if (WARN_ON(buf->dma_sgt)) { + pr_err("dmabuf buffer is already pinned\n"); + return 0; + } + + /* get the associated scatterlist for this buffer */ + sgt = dma_buf_map_attachment(buf->db_attach, buf->dma_dir); + if (IS_ERR(sgt)) { + pr_err("Error getting dmabuf scatterlist\n"); + return -EINVAL; + } + + /* checking if dmabuf is big enough to store contiguous chunk */ + contig_size = vb2_dc_get_contiguous_size(sgt); + if (contig_size < buf->size) { + pr_err("contiguous chunk is too small %lu/%lu b\n", + contig_size, buf->size); + dma_buf_unmap_attachment(buf->db_attach, sgt, buf->dma_dir); + return -EFAULT; + } + + buf->dma_addr = sg_dma_address(sgt->sgl); + buf->dma_sgt = sgt; + buf->vaddr = NULL; + + return 0; +} + +static void vb2_dc_unmap_dmabuf(void *mem_priv) +{ + struct vb2_dc_buf *buf = mem_priv; + struct sg_table *sgt = buf->dma_sgt; + + if (WARN_ON(!buf->db_attach)) { + pr_err("trying to unpin a not attached buffer\n"); + return; + } + + if (WARN_ON(!sgt)) { + pr_err("dmabuf buffer is already unpinned\n"); + return; + } + + if (buf->vaddr) { + dma_buf_vunmap(buf->db_attach->dmabuf, buf->vaddr); + buf->vaddr = NULL; + } + dma_buf_unmap_attachment(buf->db_attach, sgt, buf->dma_dir); + + buf->dma_addr = 0; + buf->dma_sgt = NULL; +} + +static void vb2_dc_detach_dmabuf(void *mem_priv) +{ + struct vb2_dc_buf *buf = mem_priv; + + /* if vb2 works correctly you should never detach mapped buffer */ + if (WARN_ON(buf->dma_addr)) + vb2_dc_unmap_dmabuf(buf); + + /* detach this attachment */ + dma_buf_detach(buf->db_attach->dmabuf, buf->db_attach); + kfree(buf); +} + +static void *vb2_dc_attach_dmabuf(struct device *dev, struct dma_buf *dbuf, + unsigned long size, enum dma_data_direction dma_dir) +{ + struct vb2_dc_buf *buf; + struct dma_buf_attachment *dba; + + if (dbuf->size < size) + return ERR_PTR(-EFAULT); + + if (WARN_ON(!dev)) + return ERR_PTR(-EINVAL); + + buf = kzalloc(sizeof(*buf), GFP_KERNEL); + if (!buf) + return ERR_PTR(-ENOMEM); + + buf->dev = dev; + /* create attachment for the dmabuf with the user device */ + dba = dma_buf_attach(dbuf, buf->dev); + if (IS_ERR(dba)) { + pr_err("failed to attach dmabuf\n"); + kfree(buf); + return dba; + } + + buf->dma_dir = dma_dir; + buf->size = size; + buf->db_attach = dba; + + return buf; +} + +/*********************************************/ +/* DMA CONTIG exported functions */ +/*********************************************/ + +const struct vb2_mem_ops vb2_dma_contig_memops = { + .alloc = vb2_dc_alloc, + .put = vb2_dc_put, + .get_dmabuf = vb2_dc_get_dmabuf, + .cookie = vb2_dc_cookie, + .vaddr = vb2_dc_vaddr, + .mmap = vb2_dc_mmap, + .get_userptr = vb2_dc_get_userptr, + .put_userptr = vb2_dc_put_userptr, + .prepare = vb2_dc_prepare, + .finish = vb2_dc_finish, + .map_dmabuf = vb2_dc_map_dmabuf, + .unmap_dmabuf = vb2_dc_unmap_dmabuf, + .attach_dmabuf = vb2_dc_attach_dmabuf, + .detach_dmabuf = vb2_dc_detach_dmabuf, + .num_users = vb2_dc_num_users, +}; +EXPORT_SYMBOL_GPL(vb2_dma_contig_memops); + +/** + * vb2_dma_contig_set_max_seg_size() - configure DMA max segment size + * @dev: device for configuring DMA parameters + * @size: size of DMA max segment size to set + * + * To allow mapping the scatter-list into a single chunk in the DMA + * address space, the device is required to have the DMA max segment + * size parameter set to a value larger than the buffer size. Otherwise, + * the DMA-mapping subsystem will split the mapping into max segment + * size chunks. This function sets the DMA max segment size + * parameter to let DMA-mapping map a buffer as a single chunk in DMA + * address space. + * This code assumes that the DMA-mapping subsystem will merge all + * scatterlist segments if this is really possible (for example when + * an IOMMU is available and enabled). + * Ideally, this parameter should be set by the generic bus code, but it + * is left with the default 64KiB value due to historical litmiations in + * other subsystems (like limited USB host drivers) and there no good + * place to set it to the proper value. + * This function should be called from the drivers, which are known to + * operate on platforms with IOMMU and provide access to shared buffers + * (either USERPTR or DMABUF). This should be done before initializing + * videobuf2 queue. + */ +int vb2_dma_contig_set_max_seg_size(struct device *dev, unsigned int size) +{ + if (!dev->dma_parms) { + dev->dma_parms = kzalloc(sizeof(*dev->dma_parms), GFP_KERNEL); + if (!dev->dma_parms) + return -ENOMEM; + } + if (dma_get_max_seg_size(dev) < size) + return dma_set_max_seg_size(dev, size); + + return 0; +} +EXPORT_SYMBOL_GPL(vb2_dma_contig_set_max_seg_size); + +/* + * vb2_dma_contig_clear_max_seg_size() - release resources for DMA parameters + * @dev: device for configuring DMA parameters + * + * This function releases resources allocated to configure DMA parameters + * (see vb2_dma_contig_set_max_seg_size() function). It should be called from + * device drivers on driver remove. + */ +void vb2_dma_contig_clear_max_seg_size(struct device *dev) +{ + kfree(dev->dma_parms); + dev->dma_parms = NULL; +} +EXPORT_SYMBOL_GPL(vb2_dma_contig_clear_max_seg_size); + +MODULE_DESCRIPTION("DMA-contig memory handling routines for videobuf2"); +MODULE_AUTHOR("Pawel Osciak <pawel@osciak.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/common/videobuf2/videobuf2-dma-sg.c b/drivers/media/common/videobuf2/videobuf2-dma-sg.c new file mode 100644 index 000000000000..753ed3138dcc --- /dev/null +++ b/drivers/media/common/videobuf2/videobuf2-dma-sg.c @@ -0,0 +1,669 @@ +/* + * videobuf2-dma-sg.c - dma scatter/gather memory allocator for videobuf2 + * + * Copyright (C) 2010 Samsung Electronics + * + * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/refcount.h> +#include <linux/scatterlist.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/vmalloc.h> + +#include <media/videobuf2-v4l2.h> +#include <media/videobuf2-memops.h> +#include <media/videobuf2-dma-sg.h> + +static int debug; +module_param(debug, int, 0644); + +#define dprintk(level, fmt, arg...) \ + do { \ + if (debug >= level) \ + printk(KERN_DEBUG "vb2-dma-sg: " fmt, ## arg); \ + } while (0) + +struct vb2_dma_sg_buf { + struct device *dev; + void *vaddr; + struct page **pages; + struct frame_vector *vec; + int offset; + enum dma_data_direction dma_dir; + struct sg_table sg_table; + /* + * This will point to sg_table when used with the MMAP or USERPTR + * memory model, and to the dma_buf sglist when used with the + * DMABUF memory model. + */ + struct sg_table *dma_sgt; + size_t size; + unsigned int num_pages; + refcount_t refcount; + struct vb2_vmarea_handler handler; + + struct dma_buf_attachment *db_attach; +}; + +static void vb2_dma_sg_put(void *buf_priv); + +static int vb2_dma_sg_alloc_compacted(struct vb2_dma_sg_buf *buf, + gfp_t gfp_flags) +{ + unsigned int last_page = 0; + int size = buf->size; + + while (size > 0) { + struct page *pages; + int order; + int i; + + order = get_order(size); + /* Dont over allocate*/ + if ((PAGE_SIZE << order) > size) + order--; + + pages = NULL; + while (!pages) { + pages = alloc_pages(GFP_KERNEL | __GFP_ZERO | + __GFP_NOWARN | gfp_flags, order); + if (pages) + break; + + if (order == 0) { + while (last_page--) + __free_page(buf->pages[last_page]); + return -ENOMEM; + } + order--; + } + + split_page(pages, order); + for (i = 0; i < (1 << order); i++) + buf->pages[last_page++] = &pages[i]; + + size -= PAGE_SIZE << order; + } + + return 0; +} + +static void *vb2_dma_sg_alloc(struct device *dev, unsigned long dma_attrs, + unsigned long size, enum dma_data_direction dma_dir, + gfp_t gfp_flags) +{ + struct vb2_dma_sg_buf *buf; + struct sg_table *sgt; + int ret; + int num_pages; + + if (WARN_ON(!dev)) + return ERR_PTR(-EINVAL); + + buf = kzalloc(sizeof *buf, GFP_KERNEL); + if (!buf) + return ERR_PTR(-ENOMEM); + + buf->vaddr = NULL; + buf->dma_dir = dma_dir; + buf->offset = 0; + buf->size = size; + /* size is already page aligned */ + buf->num_pages = size >> PAGE_SHIFT; + buf->dma_sgt = &buf->sg_table; + + buf->pages = kvmalloc_array(buf->num_pages, sizeof(struct page *), + GFP_KERNEL | __GFP_ZERO); + if (!buf->pages) + goto fail_pages_array_alloc; + + ret = vb2_dma_sg_alloc_compacted(buf, gfp_flags); + if (ret) + goto fail_pages_alloc; + + ret = sg_alloc_table_from_pages(buf->dma_sgt, buf->pages, + buf->num_pages, 0, size, GFP_KERNEL); + if (ret) + goto fail_table_alloc; + + /* Prevent the device from being released while the buffer is used */ + buf->dev = get_device(dev); + + sgt = &buf->sg_table; + /* + * No need to sync to the device, this will happen later when the + * prepare() memop is called. + */ + sgt->nents = dma_map_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents, + buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC); + if (!sgt->nents) + goto fail_map; + + buf->handler.refcount = &buf->refcount; + buf->handler.put = vb2_dma_sg_put; + buf->handler.arg = buf; + + refcount_set(&buf->refcount, 1); + + dprintk(1, "%s: Allocated buffer of %d pages\n", + __func__, buf->num_pages); + return buf; + +fail_map: + put_device(buf->dev); + sg_free_table(buf->dma_sgt); +fail_table_alloc: + num_pages = buf->num_pages; + while (num_pages--) + __free_page(buf->pages[num_pages]); +fail_pages_alloc: + kvfree(buf->pages); +fail_pages_array_alloc: + kfree(buf); + return ERR_PTR(-ENOMEM); +} + +static void vb2_dma_sg_put(void *buf_priv) +{ + struct vb2_dma_sg_buf *buf = buf_priv; + struct sg_table *sgt = &buf->sg_table; + int i = buf->num_pages; + + if (refcount_dec_and_test(&buf->refcount)) { + dprintk(1, "%s: Freeing buffer of %d pages\n", __func__, + buf->num_pages); + dma_unmap_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents, + buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC); + if (buf->vaddr) + vm_unmap_ram(buf->vaddr, buf->num_pages); + sg_free_table(buf->dma_sgt); + while (--i >= 0) + __free_page(buf->pages[i]); + kvfree(buf->pages); + put_device(buf->dev); + kfree(buf); + } +} + +static void vb2_dma_sg_prepare(void *buf_priv) +{ + struct vb2_dma_sg_buf *buf = buf_priv; + struct sg_table *sgt = buf->dma_sgt; + + /* DMABUF exporter will flush the cache for us */ + if (buf->db_attach) + return; + + dma_sync_sg_for_device(buf->dev, sgt->sgl, sgt->orig_nents, + buf->dma_dir); +} + +static void vb2_dma_sg_finish(void *buf_priv) +{ + struct vb2_dma_sg_buf *buf = buf_priv; + struct sg_table *sgt = buf->dma_sgt; + + /* DMABUF exporter will flush the cache for us */ + if (buf->db_attach) + return; + + dma_sync_sg_for_cpu(buf->dev, sgt->sgl, sgt->orig_nents, buf->dma_dir); +} + +static void *vb2_dma_sg_get_userptr(struct device *dev, unsigned long vaddr, + unsigned long size, + enum dma_data_direction dma_dir) +{ + struct vb2_dma_sg_buf *buf; + struct sg_table *sgt; + struct frame_vector *vec; + + if (WARN_ON(!dev)) + return ERR_PTR(-EINVAL); + + buf = kzalloc(sizeof *buf, GFP_KERNEL); + if (!buf) + return ERR_PTR(-ENOMEM); + + buf->vaddr = NULL; + buf->dev = dev; + buf->dma_dir = dma_dir; + buf->offset = vaddr & ~PAGE_MASK; + buf->size = size; + buf->dma_sgt = &buf->sg_table; + vec = vb2_create_framevec(vaddr, size, dma_dir == DMA_FROM_DEVICE || + dma_dir == DMA_BIDIRECTIONAL); + if (IS_ERR(vec)) + goto userptr_fail_pfnvec; + buf->vec = vec; + + buf->pages = frame_vector_pages(vec); + if (IS_ERR(buf->pages)) + goto userptr_fail_sgtable; + buf->num_pages = frame_vector_count(vec); + + if (sg_alloc_table_from_pages(buf->dma_sgt, buf->pages, + buf->num_pages, buf->offset, size, 0)) + goto userptr_fail_sgtable; + + sgt = &buf->sg_table; + /* + * No need to sync to the device, this will happen later when the + * prepare() memop is called. + */ + sgt->nents = dma_map_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents, + buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC); + if (!sgt->nents) + goto userptr_fail_map; + + return buf; + +userptr_fail_map: + sg_free_table(&buf->sg_table); +userptr_fail_sgtable: + vb2_destroy_framevec(vec); +userptr_fail_pfnvec: + kfree(buf); + return ERR_PTR(-ENOMEM); +} + +/* + * @put_userptr: inform the allocator that a USERPTR buffer will no longer + * be used + */ +static void vb2_dma_sg_put_userptr(void *buf_priv) +{ + struct vb2_dma_sg_buf *buf = buf_priv; + struct sg_table *sgt = &buf->sg_table; + int i = buf->num_pages; + + dprintk(1, "%s: Releasing userspace buffer of %d pages\n", + __func__, buf->num_pages); + dma_unmap_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents, buf->dma_dir, + DMA_ATTR_SKIP_CPU_SYNC); + if (buf->vaddr) + vm_unmap_ram(buf->vaddr, buf->num_pages); + sg_free_table(buf->dma_sgt); + if (buf->dma_dir == DMA_FROM_DEVICE || + buf->dma_dir == DMA_BIDIRECTIONAL) + while (--i >= 0) + set_page_dirty_lock(buf->pages[i]); + vb2_destroy_framevec(buf->vec); + kfree(buf); +} + +static void *vb2_dma_sg_vaddr(void *buf_priv) +{ + struct vb2_dma_sg_buf *buf = buf_priv; + + BUG_ON(!buf); + + if (!buf->vaddr) { + if (buf->db_attach) + buf->vaddr = dma_buf_vmap(buf->db_attach->dmabuf); + else + buf->vaddr = vm_map_ram(buf->pages, + buf->num_pages, -1, PAGE_KERNEL); + } + + /* add offset in case userptr is not page-aligned */ + return buf->vaddr ? buf->vaddr + buf->offset : NULL; +} + +static unsigned int vb2_dma_sg_num_users(void *buf_priv) +{ + struct vb2_dma_sg_buf *buf = buf_priv; + + return refcount_read(&buf->refcount); +} + +static int vb2_dma_sg_mmap(void *buf_priv, struct vm_area_struct *vma) +{ + struct vb2_dma_sg_buf *buf = buf_priv; + unsigned long uaddr = vma->vm_start; + unsigned long usize = vma->vm_end - vma->vm_start; + int i = 0; + + if (!buf) { + printk(KERN_ERR "No memory to map\n"); + return -EINVAL; + } + + do { + int ret; + + ret = vm_insert_page(vma, uaddr, buf->pages[i++]); + if (ret) { + printk(KERN_ERR "Remapping memory, error: %d\n", ret); + return ret; + } + + uaddr += PAGE_SIZE; + usize -= PAGE_SIZE; + } while (usize > 0); + + + /* + * Use common vm_area operations to track buffer refcount. + */ + vma->vm_private_data = &buf->handler; + vma->vm_ops = &vb2_common_vm_ops; + + vma->vm_ops->open(vma); + + return 0; +} + +/*********************************************/ +/* DMABUF ops for exporters */ +/*********************************************/ + +struct vb2_dma_sg_attachment { + struct sg_table sgt; + enum dma_data_direction dma_dir; +}; + +static int vb2_dma_sg_dmabuf_ops_attach(struct dma_buf *dbuf, struct device *dev, + struct dma_buf_attachment *dbuf_attach) +{ + struct vb2_dma_sg_attachment *attach; + unsigned int i; + struct scatterlist *rd, *wr; + struct sg_table *sgt; + struct vb2_dma_sg_buf *buf = dbuf->priv; + int ret; + + attach = kzalloc(sizeof(*attach), GFP_KERNEL); + if (!attach) + return -ENOMEM; + + sgt = &attach->sgt; + /* Copy the buf->base_sgt scatter list to the attachment, as we can't + * map the same scatter list to multiple attachments at the same time. + */ + ret = sg_alloc_table(sgt, buf->dma_sgt->orig_nents, GFP_KERNEL); + if (ret) { + kfree(attach); + return -ENOMEM; + } + + rd = buf->dma_sgt->sgl; + wr = sgt->sgl; + for (i = 0; i < sgt->orig_nents; ++i) { + sg_set_page(wr, sg_page(rd), rd->length, rd->offset); + rd = sg_next(rd); + wr = sg_next(wr); + } + + attach->dma_dir = DMA_NONE; + dbuf_attach->priv = attach; + + return 0; +} + +static void vb2_dma_sg_dmabuf_ops_detach(struct dma_buf *dbuf, + struct dma_buf_attachment *db_attach) +{ + struct vb2_dma_sg_attachment *attach = db_attach->priv; + struct sg_table *sgt; + + if (!attach) + return; + + sgt = &attach->sgt; + + /* release the scatterlist cache */ + if (attach->dma_dir != DMA_NONE) + dma_unmap_sg(db_attach->dev, sgt->sgl, sgt->orig_nents, + attach->dma_dir); + sg_free_table(sgt); + kfree(attach); + db_attach->priv = NULL; +} + +static struct sg_table *vb2_dma_sg_dmabuf_ops_map( + struct dma_buf_attachment *db_attach, enum dma_data_direction dma_dir) +{ + struct vb2_dma_sg_attachment *attach = db_attach->priv; + /* stealing dmabuf mutex to serialize map/unmap operations */ + struct mutex *lock = &db_attach->dmabuf->lock; + struct sg_table *sgt; + + mutex_lock(lock); + + sgt = &attach->sgt; + /* return previously mapped sg table */ + if (attach->dma_dir == dma_dir) { + mutex_unlock(lock); + return sgt; + } + + /* release any previous cache */ + if (attach->dma_dir != DMA_NONE) { + dma_unmap_sg(db_attach->dev, sgt->sgl, sgt->orig_nents, + attach->dma_dir); + attach->dma_dir = DMA_NONE; + } + + /* mapping to the client with new direction */ + sgt->nents = dma_map_sg(db_attach->dev, sgt->sgl, sgt->orig_nents, + dma_dir); + if (!sgt->nents) { + pr_err("failed to map scatterlist\n"); + mutex_unlock(lock); + return ERR_PTR(-EIO); + } + + attach->dma_dir = dma_dir; + + mutex_unlock(lock); + + return sgt; +} + +static void vb2_dma_sg_dmabuf_ops_unmap(struct dma_buf_attachment *db_attach, + struct sg_table *sgt, enum dma_data_direction dma_dir) +{ + /* nothing to be done here */ +} + +static void vb2_dma_sg_dmabuf_ops_release(struct dma_buf *dbuf) +{ + /* drop reference obtained in vb2_dma_sg_get_dmabuf */ + vb2_dma_sg_put(dbuf->priv); +} + +static void *vb2_dma_sg_dmabuf_ops_kmap(struct dma_buf *dbuf, unsigned long pgnum) +{ + struct vb2_dma_sg_buf *buf = dbuf->priv; + + return buf->vaddr ? buf->vaddr + pgnum * PAGE_SIZE : NULL; +} + +static void *vb2_dma_sg_dmabuf_ops_vmap(struct dma_buf *dbuf) +{ + struct vb2_dma_sg_buf *buf = dbuf->priv; + + return vb2_dma_sg_vaddr(buf); +} + +static int vb2_dma_sg_dmabuf_ops_mmap(struct dma_buf *dbuf, + struct vm_area_struct *vma) +{ + return vb2_dma_sg_mmap(dbuf->priv, vma); +} + +static const struct dma_buf_ops vb2_dma_sg_dmabuf_ops = { + .attach = vb2_dma_sg_dmabuf_ops_attach, + .detach = vb2_dma_sg_dmabuf_ops_detach, + .map_dma_buf = vb2_dma_sg_dmabuf_ops_map, + .unmap_dma_buf = vb2_dma_sg_dmabuf_ops_unmap, + .map = vb2_dma_sg_dmabuf_ops_kmap, + .map_atomic = vb2_dma_sg_dmabuf_ops_kmap, + .vmap = vb2_dma_sg_dmabuf_ops_vmap, + .mmap = vb2_dma_sg_dmabuf_ops_mmap, + .release = vb2_dma_sg_dmabuf_ops_release, +}; + +static struct dma_buf *vb2_dma_sg_get_dmabuf(void *buf_priv, unsigned long flags) +{ + struct vb2_dma_sg_buf *buf = buf_priv; + struct dma_buf *dbuf; + DEFINE_DMA_BUF_EXPORT_INFO(exp_info); + + exp_info.ops = &vb2_dma_sg_dmabuf_ops; + exp_info.size = buf->size; + exp_info.flags = flags; + exp_info.priv = buf; + + if (WARN_ON(!buf->dma_sgt)) + return NULL; + + dbuf = dma_buf_export(&exp_info); + if (IS_ERR(dbuf)) + return NULL; + + /* dmabuf keeps reference to vb2 buffer */ + refcount_inc(&buf->refcount); + + return dbuf; +} + +/*********************************************/ +/* callbacks for DMABUF buffers */ +/*********************************************/ + +static int vb2_dma_sg_map_dmabuf(void *mem_priv) +{ + struct vb2_dma_sg_buf *buf = mem_priv; + struct sg_table *sgt; + + if (WARN_ON(!buf->db_attach)) { + pr_err("trying to pin a non attached buffer\n"); + return -EINVAL; + } + + if (WARN_ON(buf->dma_sgt)) { + pr_err("dmabuf buffer is already pinned\n"); + return 0; + } + + /* get the associated scatterlist for this buffer */ + sgt = dma_buf_map_attachment(buf->db_attach, buf->dma_dir); + if (IS_ERR(sgt)) { + pr_err("Error getting dmabuf scatterlist\n"); + return -EINVAL; + } + + buf->dma_sgt = sgt; + buf->vaddr = NULL; + + return 0; +} + +static void vb2_dma_sg_unmap_dmabuf(void *mem_priv) +{ + struct vb2_dma_sg_buf *buf = mem_priv; + struct sg_table *sgt = buf->dma_sgt; + + if (WARN_ON(!buf->db_attach)) { + pr_err("trying to unpin a not attached buffer\n"); + return; + } + + if (WARN_ON(!sgt)) { + pr_err("dmabuf buffer is already unpinned\n"); + return; + } + + if (buf->vaddr) { + dma_buf_vunmap(buf->db_attach->dmabuf, buf->vaddr); + buf->vaddr = NULL; + } + dma_buf_unmap_attachment(buf->db_attach, sgt, buf->dma_dir); + + buf->dma_sgt = NULL; +} + +static void vb2_dma_sg_detach_dmabuf(void *mem_priv) +{ + struct vb2_dma_sg_buf *buf = mem_priv; + + /* if vb2 works correctly you should never detach mapped buffer */ + if (WARN_ON(buf->dma_sgt)) + vb2_dma_sg_unmap_dmabuf(buf); + + /* detach this attachment */ + dma_buf_detach(buf->db_attach->dmabuf, buf->db_attach); + kfree(buf); +} + +static void *vb2_dma_sg_attach_dmabuf(struct device *dev, struct dma_buf *dbuf, + unsigned long size, enum dma_data_direction dma_dir) +{ + struct vb2_dma_sg_buf *buf; + struct dma_buf_attachment *dba; + + if (WARN_ON(!dev)) + return ERR_PTR(-EINVAL); + + if (dbuf->size < size) + return ERR_PTR(-EFAULT); + + buf = kzalloc(sizeof(*buf), GFP_KERNEL); + if (!buf) + return ERR_PTR(-ENOMEM); + + buf->dev = dev; + /* create attachment for the dmabuf with the user device */ + dba = dma_buf_attach(dbuf, buf->dev); + if (IS_ERR(dba)) { + pr_err("failed to attach dmabuf\n"); + kfree(buf); + return dba; + } + + buf->dma_dir = dma_dir; + buf->size = size; + buf->db_attach = dba; + + return buf; +} + +static void *vb2_dma_sg_cookie(void *buf_priv) +{ + struct vb2_dma_sg_buf *buf = buf_priv; + + return buf->dma_sgt; +} + +const struct vb2_mem_ops vb2_dma_sg_memops = { + .alloc = vb2_dma_sg_alloc, + .put = vb2_dma_sg_put, + .get_userptr = vb2_dma_sg_get_userptr, + .put_userptr = vb2_dma_sg_put_userptr, + .prepare = vb2_dma_sg_prepare, + .finish = vb2_dma_sg_finish, + .vaddr = vb2_dma_sg_vaddr, + .mmap = vb2_dma_sg_mmap, + .num_users = vb2_dma_sg_num_users, + .get_dmabuf = vb2_dma_sg_get_dmabuf, + .map_dmabuf = vb2_dma_sg_map_dmabuf, + .unmap_dmabuf = vb2_dma_sg_unmap_dmabuf, + .attach_dmabuf = vb2_dma_sg_attach_dmabuf, + .detach_dmabuf = vb2_dma_sg_detach_dmabuf, + .cookie = vb2_dma_sg_cookie, +}; +EXPORT_SYMBOL_GPL(vb2_dma_sg_memops); + +MODULE_DESCRIPTION("dma scatter/gather memory handling routines for videobuf2"); +MODULE_AUTHOR("Andrzej Pietrasiewicz"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/common/videobuf2/videobuf2-dvb.c b/drivers/media/common/videobuf2/videobuf2-dvb.c new file mode 100644 index 000000000000..9f38b4218c0d --- /dev/null +++ b/drivers/media/common/videobuf2/videobuf2-dvb.c @@ -0,0 +1,345 @@ +/* + * + * some helper function for simple DVB cards which simply DMA the + * complete transport stream and let the computer sort everything else + * (i.e. we are using the software demux, ...). Also uses the + * video-buf to manage DMA buffers. + * + * (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SUSE Labs] + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/slab.h> + +#include <media/videobuf2-dvb.h> + +/* ------------------------------------------------------------------ */ + +MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]"); +MODULE_LICENSE("GPL"); + +/* ------------------------------------------------------------------ */ + +static int dvb_fnc(struct vb2_buffer *vb, void *priv) +{ + struct vb2_dvb *dvb = priv; + + dvb_dmx_swfilter(&dvb->demux, vb2_plane_vaddr(vb, 0), + vb2_get_plane_payload(vb, 0)); + return 0; +} + +static int vb2_dvb_start_feed(struct dvb_demux_feed *feed) +{ + struct dvb_demux *demux = feed->demux; + struct vb2_dvb *dvb = demux->priv; + int rc = 0; + + if (!demux->dmx.frontend) + return -EINVAL; + + mutex_lock(&dvb->lock); + dvb->nfeeds++; + + if (!dvb->dvbq.threadio) { + rc = vb2_thread_start(&dvb->dvbq, dvb_fnc, dvb, dvb->name); + if (rc) + dvb->nfeeds--; + } + if (!rc) + rc = dvb->nfeeds; + mutex_unlock(&dvb->lock); + return rc; +} + +static int vb2_dvb_stop_feed(struct dvb_demux_feed *feed) +{ + struct dvb_demux *demux = feed->demux; + struct vb2_dvb *dvb = demux->priv; + int err = 0; + + mutex_lock(&dvb->lock); + dvb->nfeeds--; + if (0 == dvb->nfeeds) + err = vb2_thread_stop(&dvb->dvbq); + mutex_unlock(&dvb->lock); + return err; +} + +static int vb2_dvb_register_adapter(struct vb2_dvb_frontends *fe, + struct module *module, + void *adapter_priv, + struct device *device, + struct media_device *mdev, + char *adapter_name, + short *adapter_nr, + int mfe_shared) +{ + int result; + + mutex_init(&fe->lock); + + /* register adapter */ + result = dvb_register_adapter(&fe->adapter, adapter_name, module, + device, adapter_nr); + if (result < 0) { + pr_warn("%s: dvb_register_adapter failed (errno = %d)\n", + adapter_name, result); + } + fe->adapter.priv = adapter_priv; + fe->adapter.mfe_shared = mfe_shared; +#ifdef CONFIG_MEDIA_CONTROLLER_DVB + if (mdev) + fe->adapter.mdev = mdev; +#endif + return result; +} + +static int vb2_dvb_register_frontend(struct dvb_adapter *adapter, + struct vb2_dvb *dvb) +{ + int result; + + /* register frontend */ + result = dvb_register_frontend(adapter, dvb->frontend); + if (result < 0) { + pr_warn("%s: dvb_register_frontend failed (errno = %d)\n", + dvb->name, result); + goto fail_frontend; + } + + /* register demux stuff */ + dvb->demux.dmx.capabilities = + DMX_TS_FILTERING | DMX_SECTION_FILTERING | + DMX_MEMORY_BASED_FILTERING; + dvb->demux.priv = dvb; + dvb->demux.filternum = 256; + dvb->demux.feednum = 256; + dvb->demux.start_feed = vb2_dvb_start_feed; + dvb->demux.stop_feed = vb2_dvb_stop_feed; + result = dvb_dmx_init(&dvb->demux); + if (result < 0) { + pr_warn("%s: dvb_dmx_init failed (errno = %d)\n", + dvb->name, result); + goto fail_dmx; + } + + dvb->dmxdev.filternum = 256; + dvb->dmxdev.demux = &dvb->demux.dmx; + dvb->dmxdev.capabilities = 0; + result = dvb_dmxdev_init(&dvb->dmxdev, adapter); + + if (result < 0) { + pr_warn("%s: dvb_dmxdev_init failed (errno = %d)\n", + dvb->name, result); + goto fail_dmxdev; + } + + dvb->fe_hw.source = DMX_FRONTEND_0; + result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_hw); + if (result < 0) { + pr_warn("%s: add_frontend failed (DMX_FRONTEND_0, errno = %d)\n", + dvb->name, result); + goto fail_fe_hw; + } + + dvb->fe_mem.source = DMX_MEMORY_FE; + result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_mem); + if (result < 0) { + pr_warn("%s: add_frontend failed (DMX_MEMORY_FE, errno = %d)\n", + dvb->name, result); + goto fail_fe_mem; + } + + result = dvb->demux.dmx.connect_frontend(&dvb->demux.dmx, &dvb->fe_hw); + if (result < 0) { + pr_warn("%s: connect_frontend failed (errno = %d)\n", + dvb->name, result); + goto fail_fe_conn; + } + + /* register network adapter */ + result = dvb_net_init(adapter, &dvb->net, &dvb->demux.dmx); + if (result < 0) { + pr_warn("%s: dvb_net_init failed (errno = %d)\n", + dvb->name, result); + goto fail_fe_conn; + } + return 0; + +fail_fe_conn: + dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem); +fail_fe_mem: + dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw); +fail_fe_hw: + dvb_dmxdev_release(&dvb->dmxdev); +fail_dmxdev: + dvb_dmx_release(&dvb->demux); +fail_dmx: + dvb_unregister_frontend(dvb->frontend); +fail_frontend: + dvb_frontend_detach(dvb->frontend); + dvb->frontend = NULL; + + return result; +} + +/* ------------------------------------------------------------------ */ +/* Register a single adapter and one or more frontends */ +int vb2_dvb_register_bus(struct vb2_dvb_frontends *f, + struct module *module, + void *adapter_priv, + struct device *device, + struct media_device *mdev, + short *adapter_nr, + int mfe_shared) +{ + struct list_head *list, *q; + struct vb2_dvb_frontend *fe; + int res; + + fe = vb2_dvb_get_frontend(f, 1); + if (!fe) { + pr_warn("Unable to register the adapter which has no frontends\n"); + return -EINVAL; + } + + /* Bring up the adapter */ + res = vb2_dvb_register_adapter(f, module, adapter_priv, device, mdev, + fe->dvb.name, adapter_nr, mfe_shared); + if (res < 0) { + pr_warn("vb2_dvb_register_adapter failed (errno = %d)\n", res); + return res; + } + + /* Attach all of the frontends to the adapter */ + mutex_lock(&f->lock); + list_for_each_safe(list, q, &f->felist) { + fe = list_entry(list, struct vb2_dvb_frontend, felist); + res = vb2_dvb_register_frontend(&f->adapter, &fe->dvb); + if (res < 0) { + pr_warn("%s: vb2_dvb_register_frontend failed (errno = %d)\n", + fe->dvb.name, res); + goto err; + } + res = dvb_create_media_graph(&f->adapter, false); + if (res < 0) + goto err; + } + + mutex_unlock(&f->lock); + return 0; + +err: + mutex_unlock(&f->lock); + vb2_dvb_unregister_bus(f); + return res; +} +EXPORT_SYMBOL(vb2_dvb_register_bus); + +void vb2_dvb_unregister_bus(struct vb2_dvb_frontends *f) +{ + vb2_dvb_dealloc_frontends(f); + + dvb_unregister_adapter(&f->adapter); +} +EXPORT_SYMBOL(vb2_dvb_unregister_bus); + +struct vb2_dvb_frontend *vb2_dvb_get_frontend( + struct vb2_dvb_frontends *f, int id) +{ + struct list_head *list, *q; + struct vb2_dvb_frontend *fe, *ret = NULL; + + mutex_lock(&f->lock); + + list_for_each_safe(list, q, &f->felist) { + fe = list_entry(list, struct vb2_dvb_frontend, felist); + if (fe->id == id) { + ret = fe; + break; + } + } + + mutex_unlock(&f->lock); + + return ret; +} +EXPORT_SYMBOL(vb2_dvb_get_frontend); + +int vb2_dvb_find_frontend(struct vb2_dvb_frontends *f, + struct dvb_frontend *p) +{ + struct list_head *list, *q; + struct vb2_dvb_frontend *fe = NULL; + int ret = 0; + + mutex_lock(&f->lock); + + list_for_each_safe(list, q, &f->felist) { + fe = list_entry(list, struct vb2_dvb_frontend, felist); + if (fe->dvb.frontend == p) { + ret = fe->id; + break; + } + } + + mutex_unlock(&f->lock); + + return ret; +} +EXPORT_SYMBOL(vb2_dvb_find_frontend); + +struct vb2_dvb_frontend *vb2_dvb_alloc_frontend( + struct vb2_dvb_frontends *f, int id) +{ + struct vb2_dvb_frontend *fe; + + fe = kzalloc(sizeof(struct vb2_dvb_frontend), GFP_KERNEL); + if (fe == NULL) + return NULL; + + fe->id = id; + mutex_init(&fe->dvb.lock); + + mutex_lock(&f->lock); + list_add_tail(&fe->felist, &f->felist); + mutex_unlock(&f->lock); + return fe; +} +EXPORT_SYMBOL(vb2_dvb_alloc_frontend); + +void vb2_dvb_dealloc_frontends(struct vb2_dvb_frontends *f) +{ + struct list_head *list, *q; + struct vb2_dvb_frontend *fe; + + mutex_lock(&f->lock); + list_for_each_safe(list, q, &f->felist) { + fe = list_entry(list, struct vb2_dvb_frontend, felist); + if (fe->dvb.net.dvbdev) { + dvb_net_release(&fe->dvb.net); + fe->dvb.demux.dmx.remove_frontend(&fe->dvb.demux.dmx, + &fe->dvb.fe_mem); + fe->dvb.demux.dmx.remove_frontend(&fe->dvb.demux.dmx, + &fe->dvb.fe_hw); + dvb_dmxdev_release(&fe->dvb.dmxdev); + dvb_dmx_release(&fe->dvb.demux); + dvb_unregister_frontend(fe->dvb.frontend); + } + if (fe->dvb.frontend) + /* always allocated, may have been reset */ + dvb_frontend_detach(fe->dvb.frontend); + list_del(list); /* remove list entry */ + kfree(fe); /* free frontend allocation */ + } + mutex_unlock(&f->lock); +} +EXPORT_SYMBOL(vb2_dvb_dealloc_frontends); diff --git a/drivers/media/common/videobuf2/videobuf2-memops.c b/drivers/media/common/videobuf2/videobuf2-memops.c new file mode 100644 index 000000000000..89e51989332b --- /dev/null +++ b/drivers/media/common/videobuf2/videobuf2-memops.c @@ -0,0 +1,135 @@ +/* + * videobuf2-memops.c - generic memory handling routines for videobuf2 + * + * Copyright (C) 2010 Samsung Electronics + * + * Author: Pawel Osciak <pawel@osciak.com> + * Marek Szyprowski <m.szyprowski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + */ + +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/dma-mapping.h> +#include <linux/vmalloc.h> +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/file.h> + +#include <media/videobuf2-v4l2.h> +#include <media/videobuf2-memops.h> + +/** + * vb2_create_framevec() - map virtual addresses to pfns + * @start: Virtual user address where we start mapping + * @length: Length of a range to map + * @write: Should we map for writing into the area + * + * This function allocates and fills in a vector with pfns corresponding to + * virtual address range passed in arguments. If pfns have corresponding pages, + * page references are also grabbed to pin pages in memory. The function + * returns pointer to the vector on success and error pointer in case of + * failure. Returned vector needs to be freed via vb2_destroy_pfnvec(). + */ +struct frame_vector *vb2_create_framevec(unsigned long start, + unsigned long length, + bool write) +{ + int ret; + unsigned long first, last; + unsigned long nr; + struct frame_vector *vec; + unsigned int flags = FOLL_FORCE; + + if (write) + flags |= FOLL_WRITE; + + first = start >> PAGE_SHIFT; + last = (start + length - 1) >> PAGE_SHIFT; + nr = last - first + 1; + vec = frame_vector_create(nr); + if (!vec) + return ERR_PTR(-ENOMEM); + ret = get_vaddr_frames(start & PAGE_MASK, nr, flags, vec); + if (ret < 0) + goto out_destroy; + /* We accept only complete set of PFNs */ + if (ret != nr) { + ret = -EFAULT; + goto out_release; + } + return vec; +out_release: + put_vaddr_frames(vec); +out_destroy: + frame_vector_destroy(vec); + return ERR_PTR(ret); +} +EXPORT_SYMBOL(vb2_create_framevec); + +/** + * vb2_destroy_framevec() - release vector of mapped pfns + * @vec: vector of pfns / pages to release + * + * This releases references to all pages in the vector @vec (if corresponding + * pfns are backed by pages) and frees the passed vector. + */ +void vb2_destroy_framevec(struct frame_vector *vec) +{ + put_vaddr_frames(vec); + frame_vector_destroy(vec); +} +EXPORT_SYMBOL(vb2_destroy_framevec); + +/** + * vb2_common_vm_open() - increase refcount of the vma + * @vma: virtual memory region for the mapping + * + * This function adds another user to the provided vma. It expects + * struct vb2_vmarea_handler pointer in vma->vm_private_data. + */ +static void vb2_common_vm_open(struct vm_area_struct *vma) +{ + struct vb2_vmarea_handler *h = vma->vm_private_data; + + pr_debug("%s: %p, refcount: %d, vma: %08lx-%08lx\n", + __func__, h, refcount_read(h->refcount), vma->vm_start, + vma->vm_end); + + refcount_inc(h->refcount); +} + +/** + * vb2_common_vm_close() - decrease refcount of the vma + * @vma: virtual memory region for the mapping + * + * This function releases the user from the provided vma. It expects + * struct vb2_vmarea_handler pointer in vma->vm_private_data. + */ +static void vb2_common_vm_close(struct vm_area_struct *vma) +{ + struct vb2_vmarea_handler *h = vma->vm_private_data; + + pr_debug("%s: %p, refcount: %d, vma: %08lx-%08lx\n", + __func__, h, refcount_read(h->refcount), vma->vm_start, + vma->vm_end); + + h->put(h->arg); +} + +/* + * vb2_common_vm_ops - common vm_ops used for tracking refcount of mmaped + * video buffers + */ +const struct vm_operations_struct vb2_common_vm_ops = { + .open = vb2_common_vm_open, + .close = vb2_common_vm_close, +}; +EXPORT_SYMBOL_GPL(vb2_common_vm_ops); + +MODULE_DESCRIPTION("common memory handling routines for videobuf2"); +MODULE_AUTHOR("Pawel Osciak <pawel@osciak.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/common/videobuf2/videobuf2-v4l2.c b/drivers/media/common/videobuf2/videobuf2-v4l2.c new file mode 100644 index 000000000000..d9a487aab99c --- /dev/null +++ b/drivers/media/common/videobuf2/videobuf2-v4l2.c @@ -0,0 +1,966 @@ +/* + * videobuf2-v4l2.c - V4L2 driver helper framework + * + * Copyright (C) 2010 Samsung Electronics + * + * Author: Pawel Osciak <pawel@osciak.com> + * Marek Szyprowski <m.szyprowski@samsung.com> + * + * The vb2_thread implementation was based on code from videobuf-dvb.c: + * (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SUSE Labs] + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + */ + +#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/poll.h> +#include <linux/slab.h> +#include <linux/sched.h> +#include <linux/freezer.h> +#include <linux/kthread.h> + +#include <media/v4l2-dev.h> +#include <media/v4l2-fh.h> +#include <media/v4l2-event.h> +#include <media/v4l2-common.h> + +#include <media/videobuf2-v4l2.h> + +static int debug; +module_param(debug, int, 0644); + +#define dprintk(level, fmt, arg...) \ + do { \ + if (debug >= level) \ + pr_info("vb2-v4l2: %s: " fmt, __func__, ## arg); \ + } while (0) + +/* Flags that are set by the vb2 core */ +#define V4L2_BUFFER_MASK_FLAGS (V4L2_BUF_FLAG_MAPPED | V4L2_BUF_FLAG_QUEUED | \ + V4L2_BUF_FLAG_DONE | V4L2_BUF_FLAG_ERROR | \ + V4L2_BUF_FLAG_PREPARED | \ + V4L2_BUF_FLAG_TIMESTAMP_MASK) +/* Output buffer flags that should be passed on to the driver */ +#define V4L2_BUFFER_OUT_FLAGS (V4L2_BUF_FLAG_PFRAME | V4L2_BUF_FLAG_BFRAME | \ + V4L2_BUF_FLAG_KEYFRAME | V4L2_BUF_FLAG_TIMECODE) + +/* + * __verify_planes_array() - verify that the planes array passed in struct + * v4l2_buffer from userspace can be safely used + */ +static int __verify_planes_array(struct vb2_buffer *vb, const struct v4l2_buffer *b) +{ + if (!V4L2_TYPE_IS_MULTIPLANAR(b->type)) + return 0; + + /* Is memory for copying plane information present? */ + if (b->m.planes == NULL) { + dprintk(1, "multi-planar buffer passed but planes array not provided\n"); + return -EINVAL; + } + + if (b->length < vb->num_planes || b->length > VB2_MAX_PLANES) { + dprintk(1, "incorrect planes array length, expected %d, got %d\n", + vb->num_planes, b->length); + return -EINVAL; + } + + return 0; +} + +static int __verify_planes_array_core(struct vb2_buffer *vb, const void *pb) +{ + return __verify_planes_array(vb, pb); +} + +/* + * __verify_length() - Verify that the bytesused value for each plane fits in + * the plane length and that the data offset doesn't exceed the bytesused value. + */ +static int __verify_length(struct vb2_buffer *vb, const struct v4l2_buffer *b) +{ + unsigned int length; + unsigned int bytesused; + unsigned int plane; + + if (!V4L2_TYPE_IS_OUTPUT(b->type)) + return 0; + + if (V4L2_TYPE_IS_MULTIPLANAR(b->type)) { + for (plane = 0; plane < vb->num_planes; ++plane) { + length = (b->memory == VB2_MEMORY_USERPTR || + b->memory == VB2_MEMORY_DMABUF) + ? b->m.planes[plane].length + : vb->planes[plane].length; + bytesused = b->m.planes[plane].bytesused + ? b->m.planes[plane].bytesused : length; + + if (b->m.planes[plane].bytesused > length) + return -EINVAL; + + if (b->m.planes[plane].data_offset > 0 && + b->m.planes[plane].data_offset >= bytesused) + return -EINVAL; + } + } else { + length = (b->memory == VB2_MEMORY_USERPTR) + ? b->length : vb->planes[0].length; + + if (b->bytesused > length) + return -EINVAL; + } + + return 0; +} + +static void __copy_timestamp(struct vb2_buffer *vb, const void *pb) +{ + const struct v4l2_buffer *b = pb; + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct vb2_queue *q = vb->vb2_queue; + + if (q->is_output) { + /* + * For output buffers copy the timestamp if needed, + * and the timecode field and flag if needed. + */ + if (q->copy_timestamp) + vb->timestamp = timeval_to_ns(&b->timestamp); + vbuf->flags |= b->flags & V4L2_BUF_FLAG_TIMECODE; + if (b->flags & V4L2_BUF_FLAG_TIMECODE) + vbuf->timecode = b->timecode; + } +}; + +static void vb2_warn_zero_bytesused(struct vb2_buffer *vb) +{ + static bool check_once; + + if (check_once) + return; + + check_once = true; + WARN_ON(1); + + pr_warn("use of bytesused == 0 is deprecated and will be removed in the future,\n"); + if (vb->vb2_queue->allow_zero_bytesused) + pr_warn("use VIDIOC_DECODER_CMD(V4L2_DEC_CMD_STOP) instead.\n"); + else + pr_warn("use the actual size instead.\n"); +} + +static int vb2_queue_or_prepare_buf(struct vb2_queue *q, struct v4l2_buffer *b, + const char *opname) +{ + if (b->type != q->type) { + dprintk(1, "%s: invalid buffer type\n", opname); + return -EINVAL; + } + + if (b->index >= q->num_buffers) { + dprintk(1, "%s: buffer index out of range\n", opname); + return -EINVAL; + } + + if (q->bufs[b->index] == NULL) { + /* Should never happen */ + dprintk(1, "%s: buffer is NULL\n", opname); + return -EINVAL; + } + + if (b->memory != q->memory) { + dprintk(1, "%s: invalid memory type\n", opname); + return -EINVAL; + } + + return __verify_planes_array(q->bufs[b->index], b); +} + +/* + * __fill_v4l2_buffer() - fill in a struct v4l2_buffer with information to be + * returned to userspace + */ +static void __fill_v4l2_buffer(struct vb2_buffer *vb, void *pb) +{ + struct v4l2_buffer *b = pb; + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct vb2_queue *q = vb->vb2_queue; + unsigned int plane; + + /* Copy back data such as timestamp, flags, etc. */ + b->index = vb->index; + b->type = vb->type; + b->memory = vb->memory; + b->bytesused = 0; + + b->flags = vbuf->flags; + b->field = vbuf->field; + b->timestamp = ns_to_timeval(vb->timestamp); + b->timecode = vbuf->timecode; + b->sequence = vbuf->sequence; + b->reserved2 = 0; + b->reserved = 0; + + if (q->is_multiplanar) { + /* + * Fill in plane-related data if userspace provided an array + * for it. The caller has already verified memory and size. + */ + b->length = vb->num_planes; + for (plane = 0; plane < vb->num_planes; ++plane) { + struct v4l2_plane *pdst = &b->m.planes[plane]; + struct vb2_plane *psrc = &vb->planes[plane]; + + pdst->bytesused = psrc->bytesused; + pdst->length = psrc->length; + if (q->memory == VB2_MEMORY_MMAP) + pdst->m.mem_offset = psrc->m.offset; + else if (q->memory == VB2_MEMORY_USERPTR) + pdst->m.userptr = psrc->m.userptr; + else if (q->memory == VB2_MEMORY_DMABUF) + pdst->m.fd = psrc->m.fd; + pdst->data_offset = psrc->data_offset; + memset(pdst->reserved, 0, sizeof(pdst->reserved)); + } + } else { + /* + * We use length and offset in v4l2_planes array even for + * single-planar buffers, but userspace does not. + */ + b->length = vb->planes[0].length; + b->bytesused = vb->planes[0].bytesused; + if (q->memory == VB2_MEMORY_MMAP) + b->m.offset = vb->planes[0].m.offset; + else if (q->memory == VB2_MEMORY_USERPTR) + b->m.userptr = vb->planes[0].m.userptr; + else if (q->memory == VB2_MEMORY_DMABUF) + b->m.fd = vb->planes[0].m.fd; + } + + /* + * Clear any buffer state related flags. + */ + b->flags &= ~V4L2_BUFFER_MASK_FLAGS; + b->flags |= q->timestamp_flags & V4L2_BUF_FLAG_TIMESTAMP_MASK; + if (!q->copy_timestamp) { + /* + * For non-COPY timestamps, drop timestamp source bits + * and obtain the timestamp source from the queue. + */ + b->flags &= ~V4L2_BUF_FLAG_TSTAMP_SRC_MASK; + b->flags |= q->timestamp_flags & V4L2_BUF_FLAG_TSTAMP_SRC_MASK; + } + + switch (vb->state) { + case VB2_BUF_STATE_QUEUED: + case VB2_BUF_STATE_ACTIVE: + b->flags |= V4L2_BUF_FLAG_QUEUED; + break; + case VB2_BUF_STATE_ERROR: + b->flags |= V4L2_BUF_FLAG_ERROR; + /* fall through */ + case VB2_BUF_STATE_DONE: + b->flags |= V4L2_BUF_FLAG_DONE; + break; + case VB2_BUF_STATE_PREPARED: + b->flags |= V4L2_BUF_FLAG_PREPARED; + break; + case VB2_BUF_STATE_PREPARING: + case VB2_BUF_STATE_DEQUEUED: + case VB2_BUF_STATE_REQUEUEING: + /* nothing */ + break; + } + + if (vb2_buffer_in_use(q, vb)) + b->flags |= V4L2_BUF_FLAG_MAPPED; + + if (!q->is_output && + b->flags & V4L2_BUF_FLAG_DONE && + b->flags & V4L2_BUF_FLAG_LAST) + q->last_buffer_dequeued = true; +} + +/* + * __fill_vb2_buffer() - fill a vb2_buffer with information provided in a + * v4l2_buffer by the userspace. It also verifies that struct + * v4l2_buffer has a valid number of planes. + */ +static int __fill_vb2_buffer(struct vb2_buffer *vb, + const void *pb, struct vb2_plane *planes) +{ + struct vb2_queue *q = vb->vb2_queue; + const struct v4l2_buffer *b = pb; + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + unsigned int plane; + int ret; + + ret = __verify_length(vb, b); + if (ret < 0) { + dprintk(1, "plane parameters verification failed: %d\n", ret); + return ret; + } + if (b->field == V4L2_FIELD_ALTERNATE && q->is_output) { + /* + * If the format's field is ALTERNATE, then the buffer's field + * should be either TOP or BOTTOM, not ALTERNATE since that + * makes no sense. The driver has to know whether the + * buffer represents a top or a bottom field in order to + * program any DMA correctly. Using ALTERNATE is wrong, since + * that just says that it is either a top or a bottom field, + * but not which of the two it is. + */ + dprintk(1, "the field is incorrectly set to ALTERNATE for an output buffer\n"); + return -EINVAL; + } + vb->timestamp = 0; + vbuf->sequence = 0; + + if (V4L2_TYPE_IS_MULTIPLANAR(b->type)) { + if (b->memory == VB2_MEMORY_USERPTR) { + for (plane = 0; plane < vb->num_planes; ++plane) { + planes[plane].m.userptr = + b->m.planes[plane].m.userptr; + planes[plane].length = + b->m.planes[plane].length; + } + } + if (b->memory == VB2_MEMORY_DMABUF) { + for (plane = 0; plane < vb->num_planes; ++plane) { + planes[plane].m.fd = + b->m.planes[plane].m.fd; + planes[plane].length = + b->m.planes[plane].length; + } + } + + /* Fill in driver-provided information for OUTPUT types */ + if (V4L2_TYPE_IS_OUTPUT(b->type)) { + /* + * Will have to go up to b->length when API starts + * accepting variable number of planes. + * + * If bytesused == 0 for the output buffer, then fall + * back to the full buffer size. In that case + * userspace clearly never bothered to set it and + * it's a safe assumption that they really meant to + * use the full plane sizes. + * + * Some drivers, e.g. old codec drivers, use bytesused == 0 + * as a way to indicate that streaming is finished. + * In that case, the driver should use the + * allow_zero_bytesused flag to keep old userspace + * applications working. + */ + for (plane = 0; plane < vb->num_planes; ++plane) { + struct vb2_plane *pdst = &planes[plane]; + struct v4l2_plane *psrc = &b->m.planes[plane]; + + if (psrc->bytesused == 0) + vb2_warn_zero_bytesused(vb); + + if (vb->vb2_queue->allow_zero_bytesused) + pdst->bytesused = psrc->bytesused; + else + pdst->bytesused = psrc->bytesused ? + psrc->bytesused : pdst->length; + pdst->data_offset = psrc->data_offset; + } + } + } else { + /* + * Single-planar buffers do not use planes array, + * so fill in relevant v4l2_buffer struct fields instead. + * In videobuf we use our internal V4l2_planes struct for + * single-planar buffers as well, for simplicity. + * + * If bytesused == 0 for the output buffer, then fall back + * to the full buffer size as that's a sensible default. + * + * Some drivers, e.g. old codec drivers, use bytesused == 0 as + * a way to indicate that streaming is finished. In that case, + * the driver should use the allow_zero_bytesused flag to keep + * old userspace applications working. + */ + if (b->memory == VB2_MEMORY_USERPTR) { + planes[0].m.userptr = b->m.userptr; + planes[0].length = b->length; + } + + if (b->memory == VB2_MEMORY_DMABUF) { + planes[0].m.fd = b->m.fd; + planes[0].length = b->length; + } + + if (V4L2_TYPE_IS_OUTPUT(b->type)) { + if (b->bytesused == 0) + vb2_warn_zero_bytesused(vb); + + if (vb->vb2_queue->allow_zero_bytesused) + planes[0].bytesused = b->bytesused; + else + planes[0].bytesused = b->bytesused ? + b->bytesused : planes[0].length; + } else + planes[0].bytesused = 0; + + } + + /* Zero flags that the vb2 core handles */ + vbuf->flags = b->flags & ~V4L2_BUFFER_MASK_FLAGS; + if (!vb->vb2_queue->copy_timestamp || !V4L2_TYPE_IS_OUTPUT(b->type)) { + /* + * Non-COPY timestamps and non-OUTPUT queues will get + * their timestamp and timestamp source flags from the + * queue. + */ + vbuf->flags &= ~V4L2_BUF_FLAG_TSTAMP_SRC_MASK; + } + + if (V4L2_TYPE_IS_OUTPUT(b->type)) { + /* + * For output buffers mask out the timecode flag: + * this will be handled later in vb2_qbuf(). + * The 'field' is valid metadata for this output buffer + * and so that needs to be copied here. + */ + vbuf->flags &= ~V4L2_BUF_FLAG_TIMECODE; + vbuf->field = b->field; + } else { + /* Zero any output buffer flags as this is a capture buffer */ + vbuf->flags &= ~V4L2_BUFFER_OUT_FLAGS; + /* Zero last flag, this is a signal from driver to userspace */ + vbuf->flags &= ~V4L2_BUF_FLAG_LAST; + } + + return 0; +} + +static const struct vb2_buf_ops v4l2_buf_ops = { + .verify_planes_array = __verify_planes_array_core, + .fill_user_buffer = __fill_v4l2_buffer, + .fill_vb2_buffer = __fill_vb2_buffer, + .copy_timestamp = __copy_timestamp, +}; + +/* + * vb2_querybuf() - query video buffer information + * @q: videobuf queue + * @b: buffer struct passed from userspace to vidioc_querybuf handler + * in driver + * + * Should be called from vidioc_querybuf ioctl handler in driver. + * This function will verify the passed v4l2_buffer structure and fill the + * relevant information for the userspace. + * + * The return values from this function are intended to be directly returned + * from vidioc_querybuf handler in driver. + */ +int vb2_querybuf(struct vb2_queue *q, struct v4l2_buffer *b) +{ + struct vb2_buffer *vb; + int ret; + + if (b->type != q->type) { + dprintk(1, "wrong buffer type\n"); + return -EINVAL; + } + + if (b->index >= q->num_buffers) { + dprintk(1, "buffer index out of range\n"); + return -EINVAL; + } + vb = q->bufs[b->index]; + ret = __verify_planes_array(vb, b); + if (!ret) + vb2_core_querybuf(q, b->index, b); + return ret; +} +EXPORT_SYMBOL(vb2_querybuf); + +int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req) +{ + int ret = vb2_verify_memory_type(q, req->memory, req->type); + + return ret ? ret : vb2_core_reqbufs(q, req->memory, &req->count); +} +EXPORT_SYMBOL_GPL(vb2_reqbufs); + +int vb2_prepare_buf(struct vb2_queue *q, struct v4l2_buffer *b) +{ + int ret; + + if (vb2_fileio_is_active(q)) { + dprintk(1, "file io in progress\n"); + return -EBUSY; + } + + ret = vb2_queue_or_prepare_buf(q, b, "prepare_buf"); + + return ret ? ret : vb2_core_prepare_buf(q, b->index, b); +} +EXPORT_SYMBOL_GPL(vb2_prepare_buf); + +int vb2_create_bufs(struct vb2_queue *q, struct v4l2_create_buffers *create) +{ + unsigned requested_planes = 1; + unsigned requested_sizes[VIDEO_MAX_PLANES]; + struct v4l2_format *f = &create->format; + int ret = vb2_verify_memory_type(q, create->memory, f->type); + unsigned i; + + create->index = q->num_buffers; + if (create->count == 0) + return ret != -EBUSY ? ret : 0; + + switch (f->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE: + case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE: + requested_planes = f->fmt.pix_mp.num_planes; + if (requested_planes == 0 || + requested_planes > VIDEO_MAX_PLANES) + return -EINVAL; + for (i = 0; i < requested_planes; i++) + requested_sizes[i] = + f->fmt.pix_mp.plane_fmt[i].sizeimage; + break; + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + case V4L2_BUF_TYPE_VIDEO_OUTPUT: + requested_sizes[0] = f->fmt.pix.sizeimage; + break; + case V4L2_BUF_TYPE_VBI_CAPTURE: + case V4L2_BUF_TYPE_VBI_OUTPUT: + requested_sizes[0] = f->fmt.vbi.samples_per_line * + (f->fmt.vbi.count[0] + f->fmt.vbi.count[1]); + break; + case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE: + case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT: + requested_sizes[0] = f->fmt.sliced.io_size; + break; + case V4L2_BUF_TYPE_SDR_CAPTURE: + case V4L2_BUF_TYPE_SDR_OUTPUT: + requested_sizes[0] = f->fmt.sdr.buffersize; + break; + case V4L2_BUF_TYPE_META_CAPTURE: + requested_sizes[0] = f->fmt.meta.buffersize; + break; + default: + return -EINVAL; + } + for (i = 0; i < requested_planes; i++) + if (requested_sizes[i] == 0) + return -EINVAL; + return ret ? ret : vb2_core_create_bufs(q, create->memory, + &create->count, requested_planes, requested_sizes); +} +EXPORT_SYMBOL_GPL(vb2_create_bufs); + +int vb2_qbuf(struct vb2_queue *q, struct v4l2_buffer *b) +{ + int ret; + + if (vb2_fileio_is_active(q)) { + dprintk(1, "file io in progress\n"); + return -EBUSY; + } + + ret = vb2_queue_or_prepare_buf(q, b, "qbuf"); + return ret ? ret : vb2_core_qbuf(q, b->index, b); +} +EXPORT_SYMBOL_GPL(vb2_qbuf); + +int vb2_dqbuf(struct vb2_queue *q, struct v4l2_buffer *b, bool nonblocking) +{ + int ret; + + if (vb2_fileio_is_active(q)) { + dprintk(1, "file io in progress\n"); + return -EBUSY; + } + + if (b->type != q->type) { + dprintk(1, "invalid buffer type\n"); + return -EINVAL; + } + + ret = vb2_core_dqbuf(q, NULL, b, nonblocking); + + /* + * After calling the VIDIOC_DQBUF V4L2_BUF_FLAG_DONE must be + * cleared. + */ + b->flags &= ~V4L2_BUF_FLAG_DONE; + + return ret; +} +EXPORT_SYMBOL_GPL(vb2_dqbuf); + +int vb2_streamon(struct vb2_queue *q, enum v4l2_buf_type type) +{ + if (vb2_fileio_is_active(q)) { + dprintk(1, "file io in progress\n"); + return -EBUSY; + } + return vb2_core_streamon(q, type); +} +EXPORT_SYMBOL_GPL(vb2_streamon); + +int vb2_streamoff(struct vb2_queue *q, enum v4l2_buf_type type) +{ + if (vb2_fileio_is_active(q)) { + dprintk(1, "file io in progress\n"); + return -EBUSY; + } + return vb2_core_streamoff(q, type); +} +EXPORT_SYMBOL_GPL(vb2_streamoff); + +int vb2_expbuf(struct vb2_queue *q, struct v4l2_exportbuffer *eb) +{ + return vb2_core_expbuf(q, &eb->fd, eb->type, eb->index, + eb->plane, eb->flags); +} +EXPORT_SYMBOL_GPL(vb2_expbuf); + +int vb2_queue_init(struct vb2_queue *q) +{ + /* + * Sanity check + */ + if (WARN_ON(!q) || + WARN_ON(q->timestamp_flags & + ~(V4L2_BUF_FLAG_TIMESTAMP_MASK | + V4L2_BUF_FLAG_TSTAMP_SRC_MASK))) + return -EINVAL; + + /* Warn that the driver should choose an appropriate timestamp type */ + WARN_ON((q->timestamp_flags & V4L2_BUF_FLAG_TIMESTAMP_MASK) == + V4L2_BUF_FLAG_TIMESTAMP_UNKNOWN); + + /* Warn that vb2_memory should match with v4l2_memory */ + if (WARN_ON(VB2_MEMORY_MMAP != (int)V4L2_MEMORY_MMAP) + || WARN_ON(VB2_MEMORY_USERPTR != (int)V4L2_MEMORY_USERPTR) + || WARN_ON(VB2_MEMORY_DMABUF != (int)V4L2_MEMORY_DMABUF)) + return -EINVAL; + + if (q->buf_struct_size == 0) + q->buf_struct_size = sizeof(struct vb2_v4l2_buffer); + + q->buf_ops = &v4l2_buf_ops; + q->is_multiplanar = V4L2_TYPE_IS_MULTIPLANAR(q->type); + q->is_output = V4L2_TYPE_IS_OUTPUT(q->type); + q->copy_timestamp = (q->timestamp_flags & V4L2_BUF_FLAG_TIMESTAMP_MASK) + == V4L2_BUF_FLAG_TIMESTAMP_COPY; + /* + * For compatibility with vb1: if QBUF hasn't been called yet, then + * return POLLERR as well. This only affects capture queues, output + * queues will always initialize waiting_for_buffers to false. + */ + q->quirk_poll_must_check_waiting_for_buffers = true; + + return vb2_core_queue_init(q); +} +EXPORT_SYMBOL_GPL(vb2_queue_init); + +void vb2_queue_release(struct vb2_queue *q) +{ + vb2_core_queue_release(q); +} +EXPORT_SYMBOL_GPL(vb2_queue_release); + +__poll_t vb2_poll(struct vb2_queue *q, struct file *file, poll_table *wait) +{ + struct video_device *vfd = video_devdata(file); + __poll_t req_events = poll_requested_events(wait); + __poll_t res = 0; + + if (test_bit(V4L2_FL_USES_V4L2_FH, &vfd->flags)) { + struct v4l2_fh *fh = file->private_data; + + if (v4l2_event_pending(fh)) + res = POLLPRI; + else if (req_events & POLLPRI) + poll_wait(file, &fh->wait, wait); + } + + return res | vb2_core_poll(q, file, wait); +} +EXPORT_SYMBOL_GPL(vb2_poll); + +/* + * The following functions are not part of the vb2 core API, but are helper + * functions that plug into struct v4l2_ioctl_ops, struct v4l2_file_operations + * and struct vb2_ops. + * They contain boilerplate code that most if not all drivers have to do + * and so they simplify the driver code. + */ + +/* The queue is busy if there is a owner and you are not that owner. */ +static inline bool vb2_queue_is_busy(struct video_device *vdev, struct file *file) +{ + return vdev->queue->owner && vdev->queue->owner != file->private_data; +} + +/* vb2 ioctl helpers */ + +int vb2_ioctl_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *p) +{ + struct video_device *vdev = video_devdata(file); + int res = vb2_verify_memory_type(vdev->queue, p->memory, p->type); + + if (res) + return res; + if (vb2_queue_is_busy(vdev, file)) + return -EBUSY; + res = vb2_core_reqbufs(vdev->queue, p->memory, &p->count); + /* If count == 0, then the owner has released all buffers and he + is no longer owner of the queue. Otherwise we have a new owner. */ + if (res == 0) + vdev->queue->owner = p->count ? file->private_data : NULL; + return res; +} +EXPORT_SYMBOL_GPL(vb2_ioctl_reqbufs); + +int vb2_ioctl_create_bufs(struct file *file, void *priv, + struct v4l2_create_buffers *p) +{ + struct video_device *vdev = video_devdata(file); + int res = vb2_verify_memory_type(vdev->queue, p->memory, + p->format.type); + + p->index = vdev->queue->num_buffers; + /* + * If count == 0, then just check if memory and type are valid. + * Any -EBUSY result from vb2_verify_memory_type can be mapped to 0. + */ + if (p->count == 0) + return res != -EBUSY ? res : 0; + if (res) + return res; + if (vb2_queue_is_busy(vdev, file)) + return -EBUSY; + + res = vb2_create_bufs(vdev->queue, p); + if (res == 0) + vdev->queue->owner = file->private_data; + return res; +} +EXPORT_SYMBOL_GPL(vb2_ioctl_create_bufs); + +int vb2_ioctl_prepare_buf(struct file *file, void *priv, + struct v4l2_buffer *p) +{ + struct video_device *vdev = video_devdata(file); + + if (vb2_queue_is_busy(vdev, file)) + return -EBUSY; + return vb2_prepare_buf(vdev->queue, p); +} +EXPORT_SYMBOL_GPL(vb2_ioctl_prepare_buf); + +int vb2_ioctl_querybuf(struct file *file, void *priv, struct v4l2_buffer *p) +{ + struct video_device *vdev = video_devdata(file); + + /* No need to call vb2_queue_is_busy(), anyone can query buffers. */ + return vb2_querybuf(vdev->queue, p); +} +EXPORT_SYMBOL_GPL(vb2_ioctl_querybuf); + +int vb2_ioctl_qbuf(struct file *file, void *priv, struct v4l2_buffer *p) +{ + struct video_device *vdev = video_devdata(file); + + if (vb2_queue_is_busy(vdev, file)) + return -EBUSY; + return vb2_qbuf(vdev->queue, p); +} +EXPORT_SYMBOL_GPL(vb2_ioctl_qbuf); + +int vb2_ioctl_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p) +{ + struct video_device *vdev = video_devdata(file); + + if (vb2_queue_is_busy(vdev, file)) + return -EBUSY; + return vb2_dqbuf(vdev->queue, p, file->f_flags & O_NONBLOCK); +} +EXPORT_SYMBOL_GPL(vb2_ioctl_dqbuf); + +int vb2_ioctl_streamon(struct file *file, void *priv, enum v4l2_buf_type i) +{ + struct video_device *vdev = video_devdata(file); + + if (vb2_queue_is_busy(vdev, file)) + return -EBUSY; + return vb2_streamon(vdev->queue, i); +} +EXPORT_SYMBOL_GPL(vb2_ioctl_streamon); + +int vb2_ioctl_streamoff(struct file *file, void *priv, enum v4l2_buf_type i) +{ + struct video_device *vdev = video_devdata(file); + + if (vb2_queue_is_busy(vdev, file)) + return -EBUSY; + return vb2_streamoff(vdev->queue, i); +} +EXPORT_SYMBOL_GPL(vb2_ioctl_streamoff); + +int vb2_ioctl_expbuf(struct file *file, void *priv, struct v4l2_exportbuffer *p) +{ + struct video_device *vdev = video_devdata(file); + + if (vb2_queue_is_busy(vdev, file)) + return -EBUSY; + return vb2_expbuf(vdev->queue, p); +} +EXPORT_SYMBOL_GPL(vb2_ioctl_expbuf); + +/* v4l2_file_operations helpers */ + +int vb2_fop_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct video_device *vdev = video_devdata(file); + + return vb2_mmap(vdev->queue, vma); +} +EXPORT_SYMBOL_GPL(vb2_fop_mmap); + +int _vb2_fop_release(struct file *file, struct mutex *lock) +{ + struct video_device *vdev = video_devdata(file); + + if (lock) + mutex_lock(lock); + if (file->private_data == vdev->queue->owner) { + vb2_queue_release(vdev->queue); + vdev->queue->owner = NULL; + } + if (lock) + mutex_unlock(lock); + return v4l2_fh_release(file); +} +EXPORT_SYMBOL_GPL(_vb2_fop_release); + +int vb2_fop_release(struct file *file) +{ + struct video_device *vdev = video_devdata(file); + struct mutex *lock = vdev->queue->lock ? vdev->queue->lock : vdev->lock; + + return _vb2_fop_release(file, lock); +} +EXPORT_SYMBOL_GPL(vb2_fop_release); + +ssize_t vb2_fop_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + struct video_device *vdev = video_devdata(file); + struct mutex *lock = vdev->queue->lock ? vdev->queue->lock : vdev->lock; + int err = -EBUSY; + + if (!(vdev->queue->io_modes & VB2_WRITE)) + return -EINVAL; + if (lock && mutex_lock_interruptible(lock)) + return -ERESTARTSYS; + if (vb2_queue_is_busy(vdev, file)) + goto exit; + err = vb2_write(vdev->queue, buf, count, ppos, + file->f_flags & O_NONBLOCK); + if (vdev->queue->fileio) + vdev->queue->owner = file->private_data; +exit: + if (lock) + mutex_unlock(lock); + return err; +} +EXPORT_SYMBOL_GPL(vb2_fop_write); + +ssize_t vb2_fop_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + struct video_device *vdev = video_devdata(file); + struct mutex *lock = vdev->queue->lock ? vdev->queue->lock : vdev->lock; + int err = -EBUSY; + + if (!(vdev->queue->io_modes & VB2_READ)) + return -EINVAL; + if (lock && mutex_lock_interruptible(lock)) + return -ERESTARTSYS; + if (vb2_queue_is_busy(vdev, file)) + goto exit; + err = vb2_read(vdev->queue, buf, count, ppos, + file->f_flags & O_NONBLOCK); + if (vdev->queue->fileio) + vdev->queue->owner = file->private_data; +exit: + if (lock) + mutex_unlock(lock); + return err; +} +EXPORT_SYMBOL_GPL(vb2_fop_read); + +__poll_t vb2_fop_poll(struct file *file, poll_table *wait) +{ + struct video_device *vdev = video_devdata(file); + struct vb2_queue *q = vdev->queue; + struct mutex *lock = q->lock ? q->lock : vdev->lock; + __poll_t res; + void *fileio; + + /* + * If this helper doesn't know how to lock, then you shouldn't be using + * it but you should write your own. + */ + WARN_ON(!lock); + + if (lock && mutex_lock_interruptible(lock)) + return POLLERR; + + fileio = q->fileio; + + res = vb2_poll(vdev->queue, file, wait); + + /* If fileio was started, then we have a new queue owner. */ + if (!fileio && q->fileio) + q->owner = file->private_data; + if (lock) + mutex_unlock(lock); + return res; +} +EXPORT_SYMBOL_GPL(vb2_fop_poll); + +#ifndef CONFIG_MMU +unsigned long vb2_fop_get_unmapped_area(struct file *file, unsigned long addr, + unsigned long len, unsigned long pgoff, unsigned long flags) +{ + struct video_device *vdev = video_devdata(file); + + return vb2_get_unmapped_area(vdev->queue, addr, len, pgoff, flags); +} +EXPORT_SYMBOL_GPL(vb2_fop_get_unmapped_area); +#endif + +/* vb2_ops helpers. Only use if vq->lock is non-NULL. */ + +void vb2_ops_wait_prepare(struct vb2_queue *vq) +{ + mutex_unlock(vq->lock); +} +EXPORT_SYMBOL_GPL(vb2_ops_wait_prepare); + +void vb2_ops_wait_finish(struct vb2_queue *vq) +{ + mutex_lock(vq->lock); +} +EXPORT_SYMBOL_GPL(vb2_ops_wait_finish); + +MODULE_DESCRIPTION("Driver helper framework for Video for Linux 2"); +MODULE_AUTHOR("Pawel Osciak <pawel@osciak.com>, Marek Szyprowski"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/common/videobuf2/videobuf2-vmalloc.c b/drivers/media/common/videobuf2/videobuf2-vmalloc.c new file mode 100644 index 000000000000..3a7c80cd1a17 --- /dev/null +++ b/drivers/media/common/videobuf2/videobuf2-vmalloc.c @@ -0,0 +1,452 @@ +/* + * videobuf2-vmalloc.c - vmalloc memory allocator for videobuf2 + * + * Copyright (C) 2010 Samsung Electronics + * + * Author: Pawel Osciak <pawel@osciak.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + */ + +#include <linux/io.h> +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/refcount.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/vmalloc.h> + +#include <media/videobuf2-v4l2.h> +#include <media/videobuf2-vmalloc.h> +#include <media/videobuf2-memops.h> + +struct vb2_vmalloc_buf { + void *vaddr; + struct frame_vector *vec; + enum dma_data_direction dma_dir; + unsigned long size; + refcount_t refcount; + struct vb2_vmarea_handler handler; + struct dma_buf *dbuf; +}; + +static void vb2_vmalloc_put(void *buf_priv); + +static void *vb2_vmalloc_alloc(struct device *dev, unsigned long attrs, + unsigned long size, enum dma_data_direction dma_dir, + gfp_t gfp_flags) +{ + struct vb2_vmalloc_buf *buf; + + buf = kzalloc(sizeof(*buf), GFP_KERNEL | gfp_flags); + if (!buf) + return ERR_PTR(-ENOMEM); + + buf->size = size; + buf->vaddr = vmalloc_user(buf->size); + buf->dma_dir = dma_dir; + buf->handler.refcount = &buf->refcount; + buf->handler.put = vb2_vmalloc_put; + buf->handler.arg = buf; + + if (!buf->vaddr) { + pr_debug("vmalloc of size %ld failed\n", buf->size); + kfree(buf); + return ERR_PTR(-ENOMEM); + } + + refcount_set(&buf->refcount, 1); + return buf; +} + +static void vb2_vmalloc_put(void *buf_priv) +{ + struct vb2_vmalloc_buf *buf = buf_priv; + + if (refcount_dec_and_test(&buf->refcount)) { + vfree(buf->vaddr); + kfree(buf); + } +} + +static void *vb2_vmalloc_get_userptr(struct device *dev, unsigned long vaddr, + unsigned long size, + enum dma_data_direction dma_dir) +{ + struct vb2_vmalloc_buf *buf; + struct frame_vector *vec; + int n_pages, offset, i; + int ret = -ENOMEM; + + buf = kzalloc(sizeof(*buf), GFP_KERNEL); + if (!buf) + return ERR_PTR(-ENOMEM); + + buf->dma_dir = dma_dir; + offset = vaddr & ~PAGE_MASK; + buf->size = size; + vec = vb2_create_framevec(vaddr, size, dma_dir == DMA_FROM_DEVICE || + dma_dir == DMA_BIDIRECTIONAL); + if (IS_ERR(vec)) { + ret = PTR_ERR(vec); + goto fail_pfnvec_create; + } + buf->vec = vec; + n_pages = frame_vector_count(vec); + if (frame_vector_to_pages(vec) < 0) { + unsigned long *nums = frame_vector_pfns(vec); + + /* + * We cannot get page pointers for these pfns. Check memory is + * physically contiguous and use direct mapping. + */ + for (i = 1; i < n_pages; i++) + if (nums[i-1] + 1 != nums[i]) + goto fail_map; + buf->vaddr = (__force void *) + ioremap_nocache(nums[0] << PAGE_SHIFT, size); + } else { + buf->vaddr = vm_map_ram(frame_vector_pages(vec), n_pages, -1, + PAGE_KERNEL); + } + + if (!buf->vaddr) + goto fail_map; + buf->vaddr += offset; + return buf; + +fail_map: + vb2_destroy_framevec(vec); +fail_pfnvec_create: + kfree(buf); + + return ERR_PTR(ret); +} + +static void vb2_vmalloc_put_userptr(void *buf_priv) +{ + struct vb2_vmalloc_buf *buf = buf_priv; + unsigned long vaddr = (unsigned long)buf->vaddr & PAGE_MASK; + unsigned int i; + struct page **pages; + unsigned int n_pages; + + if (!buf->vec->is_pfns) { + n_pages = frame_vector_count(buf->vec); + pages = frame_vector_pages(buf->vec); + if (vaddr) + vm_unmap_ram((void *)vaddr, n_pages); + if (buf->dma_dir == DMA_FROM_DEVICE || + buf->dma_dir == DMA_BIDIRECTIONAL) + for (i = 0; i < n_pages; i++) + set_page_dirty_lock(pages[i]); + } else { + iounmap((__force void __iomem *)buf->vaddr); + } + vb2_destroy_framevec(buf->vec); + kfree(buf); +} + +static void *vb2_vmalloc_vaddr(void *buf_priv) +{ + struct vb2_vmalloc_buf *buf = buf_priv; + + if (!buf->vaddr) { + pr_err("Address of an unallocated plane requested or cannot map user pointer\n"); + return NULL; + } + + return buf->vaddr; +} + +static unsigned int vb2_vmalloc_num_users(void *buf_priv) +{ + struct vb2_vmalloc_buf *buf = buf_priv; + return refcount_read(&buf->refcount); +} + +static int vb2_vmalloc_mmap(void *buf_priv, struct vm_area_struct *vma) +{ + struct vb2_vmalloc_buf *buf = buf_priv; + int ret; + + if (!buf) { + pr_err("No memory to map\n"); + return -EINVAL; + } + + ret = remap_vmalloc_range(vma, buf->vaddr, 0); + if (ret) { + pr_err("Remapping vmalloc memory, error: %d\n", ret); + return ret; + } + + /* + * Make sure that vm_areas for 2 buffers won't be merged together + */ + vma->vm_flags |= VM_DONTEXPAND; + + /* + * Use common vm_area operations to track buffer refcount. + */ + vma->vm_private_data = &buf->handler; + vma->vm_ops = &vb2_common_vm_ops; + + vma->vm_ops->open(vma); + + return 0; +} + +#ifdef CONFIG_HAS_DMA +/*********************************************/ +/* DMABUF ops for exporters */ +/*********************************************/ + +struct vb2_vmalloc_attachment { + struct sg_table sgt; + enum dma_data_direction dma_dir; +}; + +static int vb2_vmalloc_dmabuf_ops_attach(struct dma_buf *dbuf, struct device *dev, + struct dma_buf_attachment *dbuf_attach) +{ + struct vb2_vmalloc_attachment *attach; + struct vb2_vmalloc_buf *buf = dbuf->priv; + int num_pages = PAGE_ALIGN(buf->size) / PAGE_SIZE; + struct sg_table *sgt; + struct scatterlist *sg; + void *vaddr = buf->vaddr; + int ret; + int i; + + attach = kzalloc(sizeof(*attach), GFP_KERNEL); + if (!attach) + return -ENOMEM; + + sgt = &attach->sgt; + ret = sg_alloc_table(sgt, num_pages, GFP_KERNEL); + if (ret) { + kfree(attach); + return ret; + } + for_each_sg(sgt->sgl, sg, sgt->nents, i) { + struct page *page = vmalloc_to_page(vaddr); + + if (!page) { + sg_free_table(sgt); + kfree(attach); + return -ENOMEM; + } + sg_set_page(sg, page, PAGE_SIZE, 0); + vaddr += PAGE_SIZE; + } + + attach->dma_dir = DMA_NONE; + dbuf_attach->priv = attach; + return 0; +} + +static void vb2_vmalloc_dmabuf_ops_detach(struct dma_buf *dbuf, + struct dma_buf_attachment *db_attach) +{ + struct vb2_vmalloc_attachment *attach = db_attach->priv; + struct sg_table *sgt; + + if (!attach) + return; + + sgt = &attach->sgt; + + /* release the scatterlist cache */ + if (attach->dma_dir != DMA_NONE) + dma_unmap_sg(db_attach->dev, sgt->sgl, sgt->orig_nents, + attach->dma_dir); + sg_free_table(sgt); + kfree(attach); + db_attach->priv = NULL; +} + +static struct sg_table *vb2_vmalloc_dmabuf_ops_map( + struct dma_buf_attachment *db_attach, enum dma_data_direction dma_dir) +{ + struct vb2_vmalloc_attachment *attach = db_attach->priv; + /* stealing dmabuf mutex to serialize map/unmap operations */ + struct mutex *lock = &db_attach->dmabuf->lock; + struct sg_table *sgt; + + mutex_lock(lock); + + sgt = &attach->sgt; + /* return previously mapped sg table */ + if (attach->dma_dir == dma_dir) { + mutex_unlock(lock); + return sgt; + } + + /* release any previous cache */ + if (attach->dma_dir != DMA_NONE) { + dma_unmap_sg(db_attach->dev, sgt->sgl, sgt->orig_nents, + attach->dma_dir); + attach->dma_dir = DMA_NONE; + } + + /* mapping to the client with new direction */ + sgt->nents = dma_map_sg(db_attach->dev, sgt->sgl, sgt->orig_nents, + dma_dir); + if (!sgt->nents) { + pr_err("failed to map scatterlist\n"); + mutex_unlock(lock); + return ERR_PTR(-EIO); + } + + attach->dma_dir = dma_dir; + + mutex_unlock(lock); + + return sgt; +} + +static void vb2_vmalloc_dmabuf_ops_unmap(struct dma_buf_attachment *db_attach, + struct sg_table *sgt, enum dma_data_direction dma_dir) +{ + /* nothing to be done here */ +} + +static void vb2_vmalloc_dmabuf_ops_release(struct dma_buf *dbuf) +{ + /* drop reference obtained in vb2_vmalloc_get_dmabuf */ + vb2_vmalloc_put(dbuf->priv); +} + +static void *vb2_vmalloc_dmabuf_ops_kmap(struct dma_buf *dbuf, unsigned long pgnum) +{ + struct vb2_vmalloc_buf *buf = dbuf->priv; + + return buf->vaddr + pgnum * PAGE_SIZE; +} + +static void *vb2_vmalloc_dmabuf_ops_vmap(struct dma_buf *dbuf) +{ + struct vb2_vmalloc_buf *buf = dbuf->priv; + + return buf->vaddr; +} + +static int vb2_vmalloc_dmabuf_ops_mmap(struct dma_buf *dbuf, + struct vm_area_struct *vma) +{ + return vb2_vmalloc_mmap(dbuf->priv, vma); +} + +static const struct dma_buf_ops vb2_vmalloc_dmabuf_ops = { + .attach = vb2_vmalloc_dmabuf_ops_attach, + .detach = vb2_vmalloc_dmabuf_ops_detach, + .map_dma_buf = vb2_vmalloc_dmabuf_ops_map, + .unmap_dma_buf = vb2_vmalloc_dmabuf_ops_unmap, + .map = vb2_vmalloc_dmabuf_ops_kmap, + .map_atomic = vb2_vmalloc_dmabuf_ops_kmap, + .vmap = vb2_vmalloc_dmabuf_ops_vmap, + .mmap = vb2_vmalloc_dmabuf_ops_mmap, + .release = vb2_vmalloc_dmabuf_ops_release, +}; + +static struct dma_buf *vb2_vmalloc_get_dmabuf(void *buf_priv, unsigned long flags) +{ + struct vb2_vmalloc_buf *buf = buf_priv; + struct dma_buf *dbuf; + DEFINE_DMA_BUF_EXPORT_INFO(exp_info); + + exp_info.ops = &vb2_vmalloc_dmabuf_ops; + exp_info.size = buf->size; + exp_info.flags = flags; + exp_info.priv = buf; + + if (WARN_ON(!buf->vaddr)) + return NULL; + + dbuf = dma_buf_export(&exp_info); + if (IS_ERR(dbuf)) + return NULL; + + /* dmabuf keeps reference to vb2 buffer */ + refcount_inc(&buf->refcount); + + return dbuf; +} +#endif /* CONFIG_HAS_DMA */ + + +/*********************************************/ +/* callbacks for DMABUF buffers */ +/*********************************************/ + +static int vb2_vmalloc_map_dmabuf(void *mem_priv) +{ + struct vb2_vmalloc_buf *buf = mem_priv; + + buf->vaddr = dma_buf_vmap(buf->dbuf); + + return buf->vaddr ? 0 : -EFAULT; +} + +static void vb2_vmalloc_unmap_dmabuf(void *mem_priv) +{ + struct vb2_vmalloc_buf *buf = mem_priv; + + dma_buf_vunmap(buf->dbuf, buf->vaddr); + buf->vaddr = NULL; +} + +static void vb2_vmalloc_detach_dmabuf(void *mem_priv) +{ + struct vb2_vmalloc_buf *buf = mem_priv; + + if (buf->vaddr) + dma_buf_vunmap(buf->dbuf, buf->vaddr); + + kfree(buf); +} + +static void *vb2_vmalloc_attach_dmabuf(struct device *dev, struct dma_buf *dbuf, + unsigned long size, enum dma_data_direction dma_dir) +{ + struct vb2_vmalloc_buf *buf; + + if (dbuf->size < size) + return ERR_PTR(-EFAULT); + + buf = kzalloc(sizeof(*buf), GFP_KERNEL); + if (!buf) + return ERR_PTR(-ENOMEM); + + buf->dbuf = dbuf; + buf->dma_dir = dma_dir; + buf->size = size; + + return buf; +} + + +const struct vb2_mem_ops vb2_vmalloc_memops = { + .alloc = vb2_vmalloc_alloc, + .put = vb2_vmalloc_put, + .get_userptr = vb2_vmalloc_get_userptr, + .put_userptr = vb2_vmalloc_put_userptr, +#ifdef CONFIG_HAS_DMA + .get_dmabuf = vb2_vmalloc_get_dmabuf, +#endif + .map_dmabuf = vb2_vmalloc_map_dmabuf, + .unmap_dmabuf = vb2_vmalloc_unmap_dmabuf, + .attach_dmabuf = vb2_vmalloc_attach_dmabuf, + .detach_dmabuf = vb2_vmalloc_detach_dmabuf, + .vaddr = vb2_vmalloc_vaddr, + .mmap = vb2_vmalloc_mmap, + .num_users = vb2_vmalloc_num_users, +}; +EXPORT_SYMBOL_GPL(vb2_vmalloc_memops); + +MODULE_DESCRIPTION("vmalloc memory handling routines for videobuf2"); +MODULE_AUTHOR("Pawel Osciak <pawel@osciak.com>"); +MODULE_LICENSE("GPL"); |