summaryrefslogtreecommitdiff
path: root/drivers/media/dvb-frontends/cx24110.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/dvb-frontends/cx24110.c')
-rw-r--r--drivers/media/dvb-frontends/cx24110.c666
1 files changed, 666 insertions, 0 deletions
diff --git a/drivers/media/dvb-frontends/cx24110.c b/drivers/media/dvb-frontends/cx24110.c
new file mode 100644
index 000000000000..3180f5b2a6a6
--- /dev/null
+++ b/drivers/media/dvb-frontends/cx24110.c
@@ -0,0 +1,666 @@
+/*
+ cx24110 - Single Chip Satellite Channel Receiver driver module
+
+ Copyright (C) 2002 Peter Hettkamp <peter.hettkamp@htp-tel.de> based on
+ work
+ Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include "dvb_frontend.h"
+#include "cx24110.h"
+
+
+struct cx24110_state {
+
+ struct i2c_adapter* i2c;
+
+ const struct cx24110_config* config;
+
+ struct dvb_frontend frontend;
+
+ u32 lastber;
+ u32 lastbler;
+ u32 lastesn0;
+};
+
+static int debug;
+#define dprintk(args...) \
+ do { \
+ if (debug) printk(KERN_DEBUG "cx24110: " args); \
+ } while (0)
+
+static struct {u8 reg; u8 data;} cx24110_regdata[]=
+ /* Comments beginning with @ denote this value should
+ be the default */
+ {{0x09,0x01}, /* SoftResetAll */
+ {0x09,0x00}, /* release reset */
+ {0x01,0xe8}, /* MSB of code rate 27.5MS/s */
+ {0x02,0x17}, /* middle byte " */
+ {0x03,0x29}, /* LSB " */
+ {0x05,0x03}, /* @ DVB mode, standard code rate 3/4 */
+ {0x06,0xa5}, /* @ PLL 60MHz */
+ {0x07,0x01}, /* @ Fclk, i.e. sampling clock, 60MHz */
+ {0x0a,0x00}, /* @ partial chip disables, do not set */
+ {0x0b,0x01}, /* set output clock in gapped mode, start signal low
+ active for first byte */
+ {0x0c,0x11}, /* no parity bytes, large hold time, serial data out */
+ {0x0d,0x6f}, /* @ RS Sync/Unsync thresholds */
+ {0x10,0x40}, /* chip doc is misleading here: write bit 6 as 1
+ to avoid starting the BER counter. Reset the
+ CRC test bit. Finite counting selected */
+ {0x15,0xff}, /* @ size of the limited time window for RS BER
+ estimation. It is <value>*256 RS blocks, this
+ gives approx. 2.6 sec at 27.5MS/s, rate 3/4 */
+ {0x16,0x00}, /* @ enable all RS output ports */
+ {0x17,0x04}, /* @ time window allowed for the RS to sync */
+ {0x18,0xae}, /* @ allow all standard DVB code rates to be scanned
+ for automatically */
+ /* leave the current code rate and normalization
+ registers as they are after reset... */
+ {0x21,0x10}, /* @ during AutoAcq, search each viterbi setting
+ only once */
+ {0x23,0x18}, /* @ size of the limited time window for Viterbi BER
+ estimation. It is <value>*65536 channel bits, i.e.
+ approx. 38ms at 27.5MS/s, rate 3/4 */
+ {0x24,0x24}, /* do not trigger Viterbi CRC test. Finite count window */
+ /* leave front-end AGC parameters at default values */
+ /* leave decimation AGC parameters at default values */
+ {0x35,0x40}, /* disable all interrupts. They are not connected anyway */
+ {0x36,0xff}, /* clear all interrupt pending flags */
+ {0x37,0x00}, /* @ fully enable AutoAcqq state machine */
+ {0x38,0x07}, /* @ enable fade recovery, but not autostart AutoAcq */
+ /* leave the equalizer parameters on their default values */
+ /* leave the final AGC parameters on their default values */
+ {0x41,0x00}, /* @ MSB of front-end derotator frequency */
+ {0x42,0x00}, /* @ middle bytes " */
+ {0x43,0x00}, /* @ LSB " */
+ /* leave the carrier tracking loop parameters on default */
+ /* leave the bit timing loop parameters at default */
+ {0x56,0x4d}, /* set the filtune voltage to 2.7V, as recommended by */
+ /* the cx24108 data sheet for symbol rates above 15MS/s */
+ {0x57,0x00}, /* @ Filter sigma delta enabled, positive */
+ {0x61,0x95}, /* GPIO pins 1-4 have special function */
+ {0x62,0x05}, /* GPIO pin 5 has special function, pin 6 is GPIO */
+ {0x63,0x00}, /* All GPIO pins use CMOS output characteristics */
+ {0x64,0x20}, /* GPIO 6 is input, all others are outputs */
+ {0x6d,0x30}, /* tuner auto mode clock freq 62kHz */
+ {0x70,0x15}, /* use auto mode, tuner word is 21 bits long */
+ {0x73,0x00}, /* @ disable several demod bypasses */
+ {0x74,0x00}, /* @ " */
+ {0x75,0x00} /* @ " */
+ /* the remaining registers are for SEC */
+ };
+
+
+static int cx24110_writereg (struct cx24110_state* state, int reg, int data)
+{
+ u8 buf [] = { reg, data };
+ struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
+ int err;
+
+ if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
+ dprintk ("%s: writereg error (err == %i, reg == 0x%02x,"
+ " data == 0x%02x)\n", __func__, err, reg, data);
+ return -EREMOTEIO;
+ }
+
+ return 0;
+}
+
+static int cx24110_readreg (struct cx24110_state* state, u8 reg)
+{
+ int ret;
+ u8 b0 [] = { reg };
+ u8 b1 [] = { 0 };
+ struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 },
+ { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
+
+ ret = i2c_transfer(state->i2c, msg, 2);
+
+ if (ret != 2) return ret;
+
+ return b1[0];
+}
+
+static int cx24110_set_inversion (struct cx24110_state* state, fe_spectral_inversion_t inversion)
+{
+/* fixme (low): error handling */
+
+ switch (inversion) {
+ case INVERSION_OFF:
+ cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x1);
+ /* AcqSpectrInvDis on. No idea why someone should want this */
+ cx24110_writereg(state,0x5,cx24110_readreg(state,0x5)&0xf7);
+ /* Initial value 0 at start of acq */
+ cx24110_writereg(state,0x22,cx24110_readreg(state,0x22)&0xef);
+ /* current value 0 */
+ /* The cx24110 manual tells us this reg is read-only.
+ But what the heck... set it ayways */
+ break;
+ case INVERSION_ON:
+ cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x1);
+ /* AcqSpectrInvDis on. No idea why someone should want this */
+ cx24110_writereg(state,0x5,cx24110_readreg(state,0x5)|0x08);
+ /* Initial value 1 at start of acq */
+ cx24110_writereg(state,0x22,cx24110_readreg(state,0x22)|0x10);
+ /* current value 1 */
+ break;
+ case INVERSION_AUTO:
+ cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)&0xfe);
+ /* AcqSpectrInvDis off. Leave initial & current states as is */
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int cx24110_set_fec (struct cx24110_state* state, fe_code_rate_t fec)
+{
+/* fixme (low): error handling */
+
+ static const int rate[]={-1,1,2,3,5,7,-1};
+ static const int g1[]={-1,0x01,0x02,0x05,0x15,0x45,-1};
+ static const int g2[]={-1,0x01,0x03,0x06,0x1a,0x7a,-1};
+
+ /* Well, the AutoAcq engine of the cx24106 and 24110 automatically
+ searches all enabled viterbi rates, and can handle non-standard
+ rates as well. */
+
+ if (fec>FEC_AUTO)
+ fec=FEC_AUTO;
+
+ if (fec==FEC_AUTO) { /* (re-)establish AutoAcq behaviour */
+ cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)&0xdf);
+ /* clear AcqVitDis bit */
+ cx24110_writereg(state,0x18,0xae);
+ /* allow all DVB standard code rates */
+ cx24110_writereg(state,0x05,(cx24110_readreg(state,0x05)&0xf0)|0x3);
+ /* set nominal Viterbi rate 3/4 */
+ cx24110_writereg(state,0x22,(cx24110_readreg(state,0x22)&0xf0)|0x3);
+ /* set current Viterbi rate 3/4 */
+ cx24110_writereg(state,0x1a,0x05); cx24110_writereg(state,0x1b,0x06);
+ /* set the puncture registers for code rate 3/4 */
+ return 0;
+ } else {
+ cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x20);
+ /* set AcqVitDis bit */
+ if(rate[fec]>0) {
+ cx24110_writereg(state,0x05,(cx24110_readreg(state,0x05)&0xf0)|rate[fec]);
+ /* set nominal Viterbi rate */
+ cx24110_writereg(state,0x22,(cx24110_readreg(state,0x22)&0xf0)|rate[fec]);
+ /* set current Viterbi rate */
+ cx24110_writereg(state,0x1a,g1[fec]);
+ cx24110_writereg(state,0x1b,g2[fec]);
+ /* not sure if this is the right way: I always used AutoAcq mode */
+ } else
+ return -EOPNOTSUPP;
+/* fixme (low): which is the correct return code? */
+ };
+ return 0;
+}
+
+static fe_code_rate_t cx24110_get_fec (struct cx24110_state* state)
+{
+ int i;
+
+ i=cx24110_readreg(state,0x22)&0x0f;
+ if(!(i&0x08)) {
+ return FEC_1_2 + i - 1;
+ } else {
+/* fixme (low): a special code rate has been selected. In theory, we need to
+ return a denominator value, a numerator value, and a pair of puncture
+ maps to correctly describe this mode. But this should never happen in
+ practice, because it cannot be set by cx24110_get_fec. */
+ return FEC_NONE;
+ }
+}
+
+static int cx24110_set_symbolrate (struct cx24110_state* state, u32 srate)
+{
+/* fixme (low): add error handling */
+ u32 ratio;
+ u32 tmp, fclk, BDRI;
+
+ static const u32 bands[]={5000000UL,15000000UL,90999000UL/2};
+ int i;
+
+ dprintk("cx24110 debug: entering %s(%d)\n",__func__,srate);
+ if (srate>90999000UL/2)
+ srate=90999000UL/2;
+ if (srate<500000)
+ srate=500000;
+
+ for(i = 0; (i < ARRAY_SIZE(bands)) && (srate>bands[i]); i++)
+ ;
+ /* first, check which sample rate is appropriate: 45, 60 80 or 90 MHz,
+ and set the PLL accordingly (R07[1:0] Fclk, R06[7:4] PLLmult,
+ R06[3:0] PLLphaseDetGain */
+ tmp=cx24110_readreg(state,0x07)&0xfc;
+ if(srate<90999000UL/4) { /* sample rate 45MHz*/
+ cx24110_writereg(state,0x07,tmp);
+ cx24110_writereg(state,0x06,0x78);
+ fclk=90999000UL/2;
+ } else if(srate<60666000UL/2) { /* sample rate 60MHz */
+ cx24110_writereg(state,0x07,tmp|0x1);
+ cx24110_writereg(state,0x06,0xa5);
+ fclk=60666000UL;
+ } else if(srate<80888000UL/2) { /* sample rate 80MHz */
+ cx24110_writereg(state,0x07,tmp|0x2);
+ cx24110_writereg(state,0x06,0x87);
+ fclk=80888000UL;
+ } else { /* sample rate 90MHz */
+ cx24110_writereg(state,0x07,tmp|0x3);
+ cx24110_writereg(state,0x06,0x78);
+ fclk=90999000UL;
+ };
+ dprintk("cx24110 debug: fclk %d Hz\n",fclk);
+ /* we need to divide two integers with approx. 27 bits in 32 bit
+ arithmetic giving a 25 bit result */
+ /* the maximum dividend is 90999000/2, 0x02b6446c, this number is
+ also the most complex divisor. Hence, the dividend has,
+ assuming 32bit unsigned arithmetic, 6 clear bits on top, the
+ divisor 2 unused bits at the bottom. Also, the quotient is
+ always less than 1/2. Borrowed from VES1893.c, of course */
+
+ tmp=srate<<6;
+ BDRI=fclk>>2;
+ ratio=(tmp/BDRI);
+
+ tmp=(tmp%BDRI)<<8;
+ ratio=(ratio<<8)+(tmp/BDRI);
+
+ tmp=(tmp%BDRI)<<8;
+ ratio=(ratio<<8)+(tmp/BDRI);
+
+ tmp=(tmp%BDRI)<<1;
+ ratio=(ratio<<1)+(tmp/BDRI);
+
+ dprintk("srate= %d (range %d, up to %d)\n", srate,i,bands[i]);
+ dprintk("fclk = %d\n", fclk);
+ dprintk("ratio= %08x\n", ratio);
+
+ cx24110_writereg(state, 0x1, (ratio>>16)&0xff);
+ cx24110_writereg(state, 0x2, (ratio>>8)&0xff);
+ cx24110_writereg(state, 0x3, (ratio)&0xff);
+
+ return 0;
+
+}
+
+static int _cx24110_pll_write (struct dvb_frontend* fe, const u8 buf[], int len)
+{
+ struct cx24110_state *state = fe->demodulator_priv;
+
+ if (len != 3)
+ return -EINVAL;
+
+/* tuner data is 21 bits long, must be left-aligned in data */
+/* tuner cx24108 is written through a dedicated 3wire interface on the demod chip */
+/* FIXME (low): add error handling, avoid infinite loops if HW fails... */
+
+ cx24110_writereg(state,0x6d,0x30); /* auto mode at 62kHz */
+ cx24110_writereg(state,0x70,0x15); /* auto mode 21 bits */
+
+ /* if the auto tuner writer is still busy, clear it out */
+ while (cx24110_readreg(state,0x6d)&0x80)
+ cx24110_writereg(state,0x72,0);
+
+ /* write the topmost 8 bits */
+ cx24110_writereg(state,0x72,buf[0]);
+
+ /* wait for the send to be completed */
+ while ((cx24110_readreg(state,0x6d)&0xc0)==0x80)
+ ;
+
+ /* send another 8 bytes */
+ cx24110_writereg(state,0x72,buf[1]);
+ while ((cx24110_readreg(state,0x6d)&0xc0)==0x80)
+ ;
+
+ /* and the topmost 5 bits of this byte */
+ cx24110_writereg(state,0x72,buf[2]);
+ while ((cx24110_readreg(state,0x6d)&0xc0)==0x80)
+ ;
+
+ /* now strobe the enable line once */
+ cx24110_writereg(state,0x6d,0x32);
+ cx24110_writereg(state,0x6d,0x30);
+
+ return 0;
+}
+
+static int cx24110_initfe(struct dvb_frontend* fe)
+{
+ struct cx24110_state *state = fe->demodulator_priv;
+/* fixme (low): error handling */
+ int i;
+
+ dprintk("%s: init chip\n", __func__);
+
+ for(i = 0; i < ARRAY_SIZE(cx24110_regdata); i++) {
+ cx24110_writereg(state, cx24110_regdata[i].reg, cx24110_regdata[i].data);
+ };
+
+ return 0;
+}
+
+static int cx24110_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage)
+{
+ struct cx24110_state *state = fe->demodulator_priv;
+
+ switch (voltage) {
+ case SEC_VOLTAGE_13:
+ return cx24110_writereg(state,0x76,(cx24110_readreg(state,0x76)&0x3b)|0xc0);
+ case SEC_VOLTAGE_18:
+ return cx24110_writereg(state,0x76,(cx24110_readreg(state,0x76)&0x3b)|0x40);
+ default:
+ return -EINVAL;
+ };
+}
+
+static int cx24110_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t burst)
+{
+ int rv, bit;
+ struct cx24110_state *state = fe->demodulator_priv;
+ unsigned long timeout;
+
+ if (burst == SEC_MINI_A)
+ bit = 0x00;
+ else if (burst == SEC_MINI_B)
+ bit = 0x08;
+ else
+ return -EINVAL;
+
+ rv = cx24110_readreg(state, 0x77);
+ if (!(rv & 0x04))
+ cx24110_writereg(state, 0x77, rv | 0x04);
+
+ rv = cx24110_readreg(state, 0x76);
+ cx24110_writereg(state, 0x76, ((rv & 0x90) | 0x40 | bit));
+ timeout = jiffies + msecs_to_jiffies(100);
+ while (!time_after(jiffies, timeout) && !(cx24110_readreg(state, 0x76) & 0x40))
+ ; /* wait for LNB ready */
+
+ return 0;
+}
+
+static int cx24110_send_diseqc_msg(struct dvb_frontend* fe,
+ struct dvb_diseqc_master_cmd *cmd)
+{
+ int i, rv;
+ struct cx24110_state *state = fe->demodulator_priv;
+ unsigned long timeout;
+
+ if (cmd->msg_len < 3 || cmd->msg_len > 6)
+ return -EINVAL; /* not implemented */
+
+ for (i = 0; i < cmd->msg_len; i++)
+ cx24110_writereg(state, 0x79 + i, cmd->msg[i]);
+
+ rv = cx24110_readreg(state, 0x77);
+ if (rv & 0x04) {
+ cx24110_writereg(state, 0x77, rv & ~0x04);
+ msleep(30); /* reportedly fixes switching problems */
+ }
+
+ rv = cx24110_readreg(state, 0x76);
+
+ cx24110_writereg(state, 0x76, ((rv & 0x90) | 0x40) | ((cmd->msg_len-3) & 3));
+ timeout = jiffies + msecs_to_jiffies(100);
+ while (!time_after(jiffies, timeout) && !(cx24110_readreg(state, 0x76) & 0x40))
+ ; /* wait for LNB ready */
+
+ return 0;
+}
+
+static int cx24110_read_status(struct dvb_frontend* fe, fe_status_t* status)
+{
+ struct cx24110_state *state = fe->demodulator_priv;
+
+ int sync = cx24110_readreg (state, 0x55);
+
+ *status = 0;
+
+ if (sync & 0x10)
+ *status |= FE_HAS_SIGNAL;
+
+ if (sync & 0x08)
+ *status |= FE_HAS_CARRIER;
+
+ sync = cx24110_readreg (state, 0x08);
+
+ if (sync & 0x40)
+ *status |= FE_HAS_VITERBI;
+
+ if (sync & 0x20)
+ *status |= FE_HAS_SYNC;
+
+ if ((sync & 0x60) == 0x60)
+ *status |= FE_HAS_LOCK;
+
+ return 0;
+}
+
+static int cx24110_read_ber(struct dvb_frontend* fe, u32* ber)
+{
+ struct cx24110_state *state = fe->demodulator_priv;
+
+ /* fixme (maybe): value range is 16 bit. Scale? */
+ if(cx24110_readreg(state,0x24)&0x10) {
+ /* the Viterbi error counter has finished one counting window */
+ cx24110_writereg(state,0x24,0x04); /* select the ber reg */
+ state->lastber=cx24110_readreg(state,0x25)|
+ (cx24110_readreg(state,0x26)<<8);
+ cx24110_writereg(state,0x24,0x04); /* start new count window */
+ cx24110_writereg(state,0x24,0x14);
+ }
+ *ber = state->lastber;
+
+ return 0;
+}
+
+static int cx24110_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength)
+{
+ struct cx24110_state *state = fe->demodulator_priv;
+
+/* no provision in hardware. Read the frontend AGC accumulator. No idea how to scale this, but I know it is 2s complement */
+ u8 signal = cx24110_readreg (state, 0x27)+128;
+ *signal_strength = (signal << 8) | signal;
+
+ return 0;
+}
+
+static int cx24110_read_snr(struct dvb_frontend* fe, u16* snr)
+{
+ struct cx24110_state *state = fe->demodulator_priv;
+
+ /* no provision in hardware. Can be computed from the Es/N0 estimator, but I don't know how. */
+ if(cx24110_readreg(state,0x6a)&0x80) {
+ /* the Es/N0 error counter has finished one counting window */
+ state->lastesn0=cx24110_readreg(state,0x69)|
+ (cx24110_readreg(state,0x68)<<8);
+ cx24110_writereg(state,0x6a,0x84); /* start new count window */
+ }
+ *snr = state->lastesn0;
+
+ return 0;
+}
+
+static int cx24110_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
+{
+ struct cx24110_state *state = fe->demodulator_priv;
+
+ if(cx24110_readreg(state,0x10)&0x40) {
+ /* the RS error counter has finished one counting window */
+ cx24110_writereg(state,0x10,0x60); /* select the byer reg */
+ (void)(cx24110_readreg(state, 0x12) |
+ (cx24110_readreg(state, 0x13) << 8) |
+ (cx24110_readreg(state, 0x14) << 16));
+ cx24110_writereg(state,0x10,0x70); /* select the bler reg */
+ state->lastbler=cx24110_readreg(state,0x12)|
+ (cx24110_readreg(state,0x13)<<8)|
+ (cx24110_readreg(state,0x14)<<16);
+ cx24110_writereg(state,0x10,0x20); /* start new count window */
+ }
+ *ucblocks = state->lastbler;
+
+ return 0;
+}
+
+static int cx24110_set_frontend(struct dvb_frontend *fe)
+{
+ struct cx24110_state *state = fe->demodulator_priv;
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+
+ if (fe->ops.tuner_ops.set_params) {
+ fe->ops.tuner_ops.set_params(fe);
+ if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
+ }
+
+ cx24110_set_inversion(state, p->inversion);
+ cx24110_set_fec(state, p->fec_inner);
+ cx24110_set_symbolrate(state, p->symbol_rate);
+ cx24110_writereg(state,0x04,0x05); /* start acquisition */
+
+ return 0;
+}
+
+static int cx24110_get_frontend(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+ struct cx24110_state *state = fe->demodulator_priv;
+ s32 afc; unsigned sclk;
+
+/* cannot read back tuner settings (freq). Need to have some private storage */
+
+ sclk = cx24110_readreg (state, 0x07) & 0x03;
+/* ok, real AFC (FEDR) freq. is afc/2^24*fsamp, fsamp=45/60/80/90MHz.
+ * Need 64 bit arithmetic. Is thiss possible in the kernel? */
+ if (sclk==0) sclk=90999000L/2L;
+ else if (sclk==1) sclk=60666000L;
+ else if (sclk==2) sclk=80888000L;
+ else sclk=90999000L;
+ sclk>>=8;
+ afc = sclk*(cx24110_readreg (state, 0x44)&0x1f)+
+ ((sclk*cx24110_readreg (state, 0x45))>>8)+
+ ((sclk*cx24110_readreg (state, 0x46))>>16);
+
+ p->frequency += afc;
+ p->inversion = (cx24110_readreg (state, 0x22) & 0x10) ?
+ INVERSION_ON : INVERSION_OFF;
+ p->fec_inner = cx24110_get_fec(state);
+
+ return 0;
+}
+
+static int cx24110_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
+{
+ struct cx24110_state *state = fe->demodulator_priv;
+
+ return cx24110_writereg(state,0x76,(cx24110_readreg(state,0x76)&~0x10)|(((tone==SEC_TONE_ON))?0x10:0));
+}
+
+static void cx24110_release(struct dvb_frontend* fe)
+{
+ struct cx24110_state* state = fe->demodulator_priv;
+ kfree(state);
+}
+
+static struct dvb_frontend_ops cx24110_ops;
+
+struct dvb_frontend* cx24110_attach(const struct cx24110_config* config,
+ struct i2c_adapter* i2c)
+{
+ struct cx24110_state* state = NULL;
+ int ret;
+
+ /* allocate memory for the internal state */
+ state = kzalloc(sizeof(struct cx24110_state), GFP_KERNEL);
+ if (state == NULL) goto error;
+
+ /* setup the state */
+ state->config = config;
+ state->i2c = i2c;
+ state->lastber = 0;
+ state->lastbler = 0;
+ state->lastesn0 = 0;
+
+ /* check if the demod is there */
+ ret = cx24110_readreg(state, 0x00);
+ if ((ret != 0x5a) && (ret != 0x69)) goto error;
+
+ /* create dvb_frontend */
+ memcpy(&state->frontend.ops, &cx24110_ops, sizeof(struct dvb_frontend_ops));
+ state->frontend.demodulator_priv = state;
+ return &state->frontend;
+
+error:
+ kfree(state);
+ return NULL;
+}
+
+static struct dvb_frontend_ops cx24110_ops = {
+ .delsys = { SYS_DVBS },
+ .info = {
+ .name = "Conexant CX24110 DVB-S",
+ .frequency_min = 950000,
+ .frequency_max = 2150000,
+ .frequency_stepsize = 1011, /* kHz for QPSK frontends */
+ .frequency_tolerance = 29500,
+ .symbol_rate_min = 1000000,
+ .symbol_rate_max = 45000000,
+ .caps = FE_CAN_INVERSION_AUTO |
+ FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+ FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+ FE_CAN_QPSK | FE_CAN_RECOVER
+ },
+
+ .release = cx24110_release,
+
+ .init = cx24110_initfe,
+ .write = _cx24110_pll_write,
+ .set_frontend = cx24110_set_frontend,
+ .get_frontend = cx24110_get_frontend,
+ .read_status = cx24110_read_status,
+ .read_ber = cx24110_read_ber,
+ .read_signal_strength = cx24110_read_signal_strength,
+ .read_snr = cx24110_read_snr,
+ .read_ucblocks = cx24110_read_ucblocks,
+
+ .diseqc_send_master_cmd = cx24110_send_diseqc_msg,
+ .set_tone = cx24110_set_tone,
+ .set_voltage = cx24110_set_voltage,
+ .diseqc_send_burst = cx24110_diseqc_send_burst,
+};
+
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
+
+MODULE_DESCRIPTION("Conexant CX24110 DVB-S Demodulator driver");
+MODULE_AUTHOR("Peter Hettkamp");
+MODULE_LICENSE("GPL");
+
+EXPORT_SYMBOL(cx24110_attach);