diff options
Diffstat (limited to 'drivers/media/dvb-frontends/drx39xyj/drx_driver.h')
| -rw-r--r-- | drivers/media/dvb-frontends/drx39xyj/drx_driver.h | 55 |
1 files changed, 0 insertions, 55 deletions
diff --git a/drivers/media/dvb-frontends/drx39xyj/drx_driver.h b/drivers/media/dvb-frontends/drx39xyj/drx_driver.h index b9ba48f88523..daa9027983e8 100644 --- a/drivers/media/dvb-frontends/drx39xyj/drx_driver.h +++ b/drivers/media/dvb-frontends/drx39xyj/drx_driver.h @@ -782,61 +782,6 @@ enum drx_pilot_mode { DRX_PILOT_AUTO = DRX_AUTO /**< Autodetect Pilot */ }; -#define DRX_CTRL_BASE ((u32)0) - -#define DRX_CTRL_NOP (DRX_CTRL_BASE + 0)/**< No Operation */ -#define DRX_CTRL_PROBE_DEVICE (DRX_CTRL_BASE + 1)/**< Probe device */ - -#define DRX_CTRL_LOAD_UCODE (DRX_CTRL_BASE + 2)/**< Load microcode */ -#define DRX_CTRL_VERIFY_UCODE (DRX_CTRL_BASE + 3)/**< Verify microcode */ -#define DRX_CTRL_SET_CHANNEL (DRX_CTRL_BASE + 4)/**< Set channel */ -#define DRX_CTRL_GET_CHANNEL (DRX_CTRL_BASE + 5)/**< Get channel */ -#define DRX_CTRL_LOCK_STATUS (DRX_CTRL_BASE + 6)/**< Get lock status */ -#define DRX_CTRL_SIG_QUALITY (DRX_CTRL_BASE + 7)/**< Get signal quality */ -#define DRX_CTRL_SIG_STRENGTH (DRX_CTRL_BASE + 8)/**< Get signal strength*/ -#define DRX_CTRL_RF_POWER (DRX_CTRL_BASE + 9)/**< Get RF power */ -#define DRX_CTRL_CONSTEL (DRX_CTRL_BASE + 10)/**< Get constel point */ -#define DRX_CTRL_SCAN_INIT (DRX_CTRL_BASE + 11)/**< Initialize scan */ -#define DRX_CTRL_SCAN_NEXT (DRX_CTRL_BASE + 12)/**< Scan for next */ -#define DRX_CTRL_SCAN_STOP (DRX_CTRL_BASE + 13)/**< Stop scan */ -#define DRX_CTRL_TPS_INFO (DRX_CTRL_BASE + 14)/**< Get TPS info */ -#define DRX_CTRL_SET_CFG (DRX_CTRL_BASE + 15)/**< Set configuration */ -#define DRX_CTRL_GET_CFG (DRX_CTRL_BASE + 16)/**< Get configuration */ -#define DRX_CTRL_VERSION (DRX_CTRL_BASE + 17)/**< Get version info */ -#define DRX_CTRL_I2C_BRIDGE (DRX_CTRL_BASE + 18)/**< Open/close bridge */ -#define DRX_CTRL_SET_STANDARD (DRX_CTRL_BASE + 19)/**< Set demod std */ -#define DRX_CTRL_GET_STANDARD (DRX_CTRL_BASE + 20)/**< Get demod std */ -#define DRX_CTRL_SET_OOB (DRX_CTRL_BASE + 21)/**< Set OOB param */ -#define DRX_CTRL_GET_OOB (DRX_CTRL_BASE + 22)/**< Get OOB param */ -#define DRX_CTRL_AUD_SET_STANDARD (DRX_CTRL_BASE + 23)/**< Set audio param */ -#define DRX_CTRL_AUD_GET_STANDARD (DRX_CTRL_BASE + 24)/**< Get audio param */ -#define DRX_CTRL_AUD_GET_STATUS (DRX_CTRL_BASE + 25)/**< Read RDS */ -#define DRX_CTRL_AUD_BEEP (DRX_CTRL_BASE + 26)/**< Read RDS */ -#define DRX_CTRL_I2C_READWRITE (DRX_CTRL_BASE + 27)/**< Read/write I2C */ -#define DRX_CTRL_PROGRAM_TUNER (DRX_CTRL_BASE + 28)/**< Program tuner */ - - /* Professional */ -#define DRX_CTRL_MB_CFG (DRX_CTRL_BASE + 29) /**< */ -#define DRX_CTRL_MB_READ (DRX_CTRL_BASE + 30) /**< */ -#define DRX_CTRL_MB_WRITE (DRX_CTRL_BASE + 31) /**< */ -#define DRX_CTRL_MB_CONSTEL (DRX_CTRL_BASE + 32) /**< */ -#define DRX_CTRL_MB_MER (DRX_CTRL_BASE + 33) /**< */ - - /* Misc */ -#define DRX_CTRL_UIO_CFG DRX_CTRL_SET_UIO_CFG /**< Configure UIO */ -#define DRX_CTRL_SET_UIO_CFG (DRX_CTRL_BASE + 34) /**< Configure UIO */ -#define DRX_CTRL_GET_UIO_CFG (DRX_CTRL_BASE + 35) /**< Configure UIO */ -#define DRX_CTRL_UIO_READ (DRX_CTRL_BASE + 36) /**< Read from UIO */ -#define DRX_CTRL_UIO_WRITE (DRX_CTRL_BASE + 37) /**< Write to UIO */ -#define DRX_CTRL_READ_EVENTS (DRX_CTRL_BASE + 38) /**< Read events */ -#define DRX_CTRL_HDL_EVENTS (DRX_CTRL_BASE + 39) /**< Handle events */ -#define DRX_CTRL_POWER_MODE (DRX_CTRL_BASE + 40) /**< Set power mode */ -#define DRX_CTRL_LOAD_FILTER (DRX_CTRL_BASE + 41) /**< Load chan. filter */ -#define DRX_CTRL_VALIDATE_UCODE (DRX_CTRL_BASE + 42) /**< Validate ucode */ -#define DRX_CTRL_DUMP_REGISTERS (DRX_CTRL_BASE + 43) /**< Dump registers */ - -#define DRX_CTRL_MAX (DRX_CTRL_BASE + 44) /* never to be used */ - /** * enum drxu_code_action - indicate if firmware has to be uploaded or verified. * @UCODE_UPLOAD: Upload the microcode image to device |