diff options
Diffstat (limited to 'drivers/media/dvb-frontends/lgdt3306a.c')
| -rw-r--r-- | drivers/media/dvb-frontends/lgdt3306a.c | 69 |
1 files changed, 59 insertions, 10 deletions
diff --git a/drivers/media/dvb-frontends/lgdt3306a.c b/drivers/media/dvb-frontends/lgdt3306a.c index 6356815cf3e1..7eb4e1469d20 100644 --- a/drivers/media/dvb-frontends/lgdt3306a.c +++ b/drivers/media/dvb-frontends/lgdt3306a.c @@ -30,6 +30,17 @@ static int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "set debug level (info=1, reg=2 (or-able))"); +/* + * Older drivers treated QAM64 and QAM256 the same; that is the HW always + * used "Auto" mode during detection. Setting "forced_manual"=1 allows + * the user to treat these modes as separate. For backwards compatibility, + * it's off by default. QAM_AUTO can now be specified to achive that + * effect even if "forced_manual"=1 + */ +static int forced_manual; +module_param(forced_manual, int, 0644); +MODULE_PARM_DESC(forced_manual, "if set, QAM64 and QAM256 will only lock to modulation specified"); + #define DBG_INFO 1 #define DBG_REG 2 #define DBG_DUMP 4 /* FGR - comment out to remove dump code */ @@ -566,7 +577,12 @@ static int lgdt3306a_set_qam(struct lgdt3306a_state *state, int modulation) /* 3. : 64QAM/256QAM detection(manual, auto) */ ret = lgdt3306a_read_reg(state, 0x0009, &val); val &= 0xfc; - val |= 0x02; /* STDOPDETCMODE[1:0]=1=Manual 2=Auto */ + /* Check for forced Manual modulation modes; otherwise always "auto" */ + if(forced_manual && (modulation != QAM_AUTO)){ + val |= 0x01; /* STDOPDETCMODE[1:0]= 1=Manual */ + } else { + val |= 0x02; /* STDOPDETCMODE[1:0]= 2=Auto */ + } ret = lgdt3306a_write_reg(state, 0x0009, val); if (lg_chkerr(ret)) goto fail; @@ -598,6 +614,28 @@ static int lgdt3306a_set_qam(struct lgdt3306a_state *state, int modulation) if (lg_chkerr(ret)) goto fail; + /* 5.1 V0.36 SRDCHKALWAYS : For better QAM detection */ + ret = lgdt3306a_read_reg(state, 0x000a, &val); + val &= 0xfd; + val |= 0x02; + ret = lgdt3306a_write_reg(state, 0x000a, val); + if (lg_chkerr(ret)) + goto fail; + + /* 5.2 V0.36 Control of "no signal" detector function */ + ret = lgdt3306a_read_reg(state, 0x2849, &val); + val &= 0xdf; + ret = lgdt3306a_write_reg(state, 0x2849, val); + if (lg_chkerr(ret)) + goto fail; + + /* 5.3 Fix for Blonder Tongue HDE-2H-QAM and AQM modulators */ + ret = lgdt3306a_read_reg(state, 0x302b, &val); + val &= 0x7f; /* SELFSYNCFINDEN_CQS=0; disable auto reset */ + ret = lgdt3306a_write_reg(state, 0x302b, val); + if (lg_chkerr(ret)) + goto fail; + /* 6. Reset */ ret = lgdt3306a_soft_reset(state); if (lg_chkerr(ret)) @@ -620,10 +658,9 @@ static int lgdt3306a_set_modulation(struct lgdt3306a_state *state, ret = lgdt3306a_set_vsb(state); break; case QAM_64: - ret = lgdt3306a_set_qam(state, QAM_64); - break; case QAM_256: - ret = lgdt3306a_set_qam(state, QAM_256); + case QAM_AUTO: + ret = lgdt3306a_set_qam(state, p->modulation); break; default: return -EINVAL; @@ -650,6 +687,7 @@ static int lgdt3306a_agc_setup(struct lgdt3306a_state *state, break; case QAM_64: case QAM_256: + case QAM_AUTO: break; default: return -EINVAL; @@ -704,6 +742,7 @@ static int lgdt3306a_spectral_inversion(struct lgdt3306a_state *state, break; case QAM_64: case QAM_256: + case QAM_AUTO: /* Auto ok for QAM */ ret = lgdt3306a_set_inversion_auto(state, 1); break; @@ -727,6 +766,7 @@ static int lgdt3306a_set_if(struct lgdt3306a_state *state, break; case QAM_64: case QAM_256: + case QAM_AUTO: if_freq_khz = state->cfg->qam_if_khz; break; default: @@ -1585,6 +1625,7 @@ static int lgdt3306a_read_status(struct dvb_frontend *fe, switch (state->current_modulation) { case QAM_256: case QAM_64: + case QAM_AUTO: if (lgdt3306a_qam_lock_poll(state) == LG3306_LOCK) { *status |= FE_HAS_VITERBI; *status |= FE_HAS_SYNC; @@ -1628,6 +1669,7 @@ static int lgdt3306a_read_signal_strength(struct dvb_frontend *fe, * Calculate some sort of "strength" from SNR */ struct lgdt3306a_state *state = fe->demodulator_priv; + u8 val; u16 snr; /* snr_x10 */ int ret; u32 ref_snr; /* snr*100 */ @@ -1640,11 +1682,15 @@ static int lgdt3306a_read_signal_strength(struct dvb_frontend *fe, ref_snr = 1600; /* 16dB */ break; case QAM_64: - ref_snr = 2200; /* 22dB */ - break; case QAM_256: - ref_snr = 2800; /* 28dB */ - break; + case QAM_AUTO: + /* need to know actual modulation to set proper SNR baseline */ + lgdt3306a_read_reg(state, 0x00a6, &val); + if(val & 0x04) + ref_snr = 2800; /* QAM-256 28dB */ + else + ref_snr = 2200; /* QAM-64 22dB */ + break; default: return -EINVAL; } @@ -2114,7 +2160,7 @@ static const struct dvb_frontend_ops lgdt3306a_ops = { .frequency_min = 54000000, .frequency_max = 858000000, .frequency_stepsize = 62500, - .caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB + .caps = FE_CAN_QAM_AUTO | FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB }, .i2c_gate_ctrl = lgdt3306a_i2c_gate_ctrl, .init = lgdt3306a_init, @@ -2177,6 +2223,7 @@ static int lgdt3306a_probe(struct i2c_client *client, i2c_set_clientdata(client, fe->demodulator_priv); state = fe->demodulator_priv; + state->frontend.ops.release = NULL; /* create mux i2c adapter for tuner */ state->muxc = i2c_mux_alloc(client->adapter, &client->dev, @@ -2196,6 +2243,8 @@ static int lgdt3306a_probe(struct i2c_client *client, *config->i2c_adapter = state->muxc->adapter[0]; *config->fe = fe; + dev_info(&client->dev, "LG Electronics LGDT3306A successfully identified\n"); + return 0; err_kfree: @@ -2203,7 +2252,7 @@ err_kfree: err_fe: kfree(config); fail: - dev_dbg(&client->dev, "failed=%d\n", ret); + dev_warn(&client->dev, "probe failed = %d\n", ret); return ret; } |