diff options
Diffstat (limited to 'drivers/media/i2c/smiapp/smiapp.h')
| -rw-r--r-- | drivers/media/i2c/smiapp/smiapp.h | 280 |
1 files changed, 0 insertions, 280 deletions
diff --git a/drivers/media/i2c/smiapp/smiapp.h b/drivers/media/i2c/smiapp/smiapp.h deleted file mode 100644 index c6e4e05a7522..000000000000 --- a/drivers/media/i2c/smiapp/smiapp.h +++ /dev/null @@ -1,280 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * drivers/media/i2c/smiapp/smiapp.h - * - * Generic driver for SMIA/SMIA++ compliant camera modules - * - * Copyright (C) 2010--2012 Nokia Corporation - * Contact: Sakari Ailus <sakari.ailus@iki.fi> - */ - -#ifndef __SMIAPP_PRIV_H_ -#define __SMIAPP_PRIV_H_ - -#include <linux/mutex.h> -#include <media/v4l2-ctrls.h> -#include <media/v4l2-subdev.h> - -#include "ccs-regs.h" - -#include "smiapp-pll.h" -#include "smiapp-reg-defs.h" -#include "smiapp-regs.h" -#include "smiapp-quirk.h" - -/* - * Standard SMIA++ constants - */ -#define SMIA_VERSION_1 10 -#define SMIAPP_VERSION_0_8 8 /* Draft 0.8 */ -#define SMIAPP_VERSION_0_9 9 /* Draft 0.9 */ -#define SMIAPP_VERSION_1 10 - -#define SMIAPP_PROFILE_0 0 -#define SMIAPP_PROFILE_1 1 -#define SMIAPP_PROFILE_2 2 - -#define SMIAPP_NVM_PAGE_SIZE 64 /* bytes */ - -#define SMIAPP_RESET_DELAY_CLOCKS 2400 -#define SMIAPP_RESET_DELAY(clk) \ - (1000 + (SMIAPP_RESET_DELAY_CLOCKS * 1000 \ - + (clk) / 1000 - 1) / ((clk) / 1000)) - -#define SMIAPP_COLOUR_COMPONENTS 4 - -#define SMIAPP_NAME "smiapp" - -#define SMIAPP_DFL_I2C_ADDR (0x20 >> 1) /* Default I2C Address */ -#define SMIAPP_ALT_I2C_ADDR (0x6e >> 1) /* Alternate I2C Address */ - -/* - * Sometimes due to board layout considerations the camera module can be - * mounted rotated. The typical rotation used is 180 degrees which can be - * corrected by giving a default H-FLIP and V-FLIP in the sensor readout. - * FIXME: rotation also changes the bayer pattern. - */ -enum smiapp_module_board_orient { - SMIAPP_MODULE_BOARD_ORIENT_0 = 0, - SMIAPP_MODULE_BOARD_ORIENT_180, -}; - -struct smiapp_flash_strobe_parms { - u8 mode; - u32 strobe_width_high_us; - u16 strobe_delay; - u16 stobe_start_point; - u8 trigger; -}; - -struct smiapp_hwconfig { - /* - * Change the cci address if i2c_addr_alt is set. - * Both default and alternate cci addr need to be present - */ - unsigned short i2c_addr_dfl; /* Default i2c addr */ - unsigned short i2c_addr_alt; /* Alternate i2c addr */ - - uint32_t ext_clk; /* sensor external clk */ - - unsigned int lanes; /* Number of CSI-2 lanes */ - uint32_t csi_signalling_mode; /* SMIAPP_CSI_SIGNALLING_MODE_* */ - uint64_t *op_sys_clock; - - enum smiapp_module_board_orient module_board_orient; - - struct smiapp_flash_strobe_parms *strobe_setup; -}; - -struct smiapp_quirk; - -#define SMIAPP_MODULE_IDENT_FLAG_REV_LE (1 << 0) - -struct smiapp_module_ident { - u16 mipi_manufacturer_id; - u16 model_id; - u8 smia_manufacturer_id; - u8 revision_number_major; - - u8 flags; - - char *name; - const struct smiapp_quirk *quirk; -}; - -struct smiapp_module_info { - u32 smia_manufacturer_id; - u32 mipi_manufacturer_id; - u32 model_id; - u32 revision_number_major; - u32 revision_number_minor; - - u32 module_year; - u32 module_month; - u32 module_day; - - u32 sensor_smia_manufacturer_id; - u32 sensor_mipi_manufacturer_id; - u32 sensor_model_id; - u32 sensor_revision_number; - u32 sensor_firmware_version; - - u32 smia_version; - u32 smiapp_version; - u32 ccs_version; - - u32 smiapp_profile; - - char *name; - const struct smiapp_quirk *quirk; -}; - -#define SMIAPP_IDENT_FQ(manufacturer, model, rev, fl, _name, _quirk) \ - { .smia_manufacturer_id = manufacturer, \ - .model_id = model, \ - .revision_number_major = rev, \ - .flags = fl, \ - .name = _name, \ - .quirk = _quirk, } - -#define SMIAPP_IDENT_LQ(manufacturer, model, rev, _name, _quirk) \ - { .smia_manufacturer_id = manufacturer, \ - .model_id = model, \ - .revision_number_major = rev, \ - .flags = SMIAPP_MODULE_IDENT_FLAG_REV_LE, \ - .name = _name, \ - .quirk = _quirk, } - -#define SMIAPP_IDENT_L(manufacturer, model, rev, _name) \ - { .smia_manufacturer_id = manufacturer, \ - .model_id = model, \ - .revision_number_major = rev, \ - .flags = SMIAPP_MODULE_IDENT_FLAG_REV_LE, \ - .name = _name, } - -#define SMIAPP_IDENT_Q(manufacturer, model, rev, _name, _quirk) \ - { .smia_manufacturer_id = manufacturer, \ - .model_id = model, \ - .revision_number_major = rev, \ - .flags = 0, \ - .name = _name, \ - .quirk = _quirk, } - -#define SMIAPP_IDENT(manufacturer, model, rev, _name) \ - { .smia_manufacturer_id = manufacturer, \ - .model_id = model, \ - .revision_number_major = rev, \ - .flags = 0, \ - .name = _name, } - -struct smiapp_csi_data_format { - u32 code; - u8 width; - u8 compressed; - u8 pixel_order; -}; - -#define SMIAPP_SUBDEVS 3 - -#define SMIAPP_PA_PAD_SRC 0 -#define SMIAPP_PAD_SINK 0 -#define SMIAPP_PAD_SRC 1 -#define SMIAPP_PADS 2 - -struct smiapp_binning_subtype { - u8 horizontal:4; - u8 vertical:4; -} __packed; - -struct smiapp_subdev { - struct v4l2_subdev sd; - struct media_pad pads[SMIAPP_PADS]; - struct v4l2_rect sink_fmt; - struct v4l2_rect crop[SMIAPP_PADS]; - struct v4l2_rect compose; /* compose on sink */ - unsigned short sink_pad; - unsigned short source_pad; - int npads; - struct smiapp_sensor *sensor; - struct v4l2_ctrl_handler ctrl_handler; -}; - -/* - * struct smiapp_sensor - Main device structure - */ -struct smiapp_sensor { - /* - * "mutex" is used to serialise access to all fields here - * except v4l2_ctrls at the end of the struct. "mutex" is also - * used to serialise access to file handle specific - * information. - */ - struct mutex mutex; - struct smiapp_subdev ssds[SMIAPP_SUBDEVS]; - u32 ssds_used; - struct smiapp_subdev *src; - struct smiapp_subdev *binner; - struct smiapp_subdev *scaler; - struct smiapp_subdev *pixel_array; - struct smiapp_hwconfig *hwcfg; - struct regulator *vana; - struct clk *ext_clk; - struct gpio_desc *xshutdown; - void *ccs_limits; - u8 nbinning_subtypes; - struct smiapp_binning_subtype binning_subtypes[CCS_LIM_BINNING_SUB_TYPE_MAX_N + 1]; - u32 mbus_frame_fmts; - const struct smiapp_csi_data_format *csi_format; - const struct smiapp_csi_data_format *internal_csi_format; - u32 default_mbus_frame_fmts; - int default_pixel_order; - - u8 binning_horizontal; - u8 binning_vertical; - - u8 scale_m; - u8 scaling_mode; - - u8 hvflip_inv_mask; /* H/VFLIP inversion due to sensor orientation */ - u8 frame_skip; - u16 embedded_start; /* embedded data start line */ - u16 embedded_end; - u16 image_start; /* image data start line */ - u16 visible_pixel_start; /* start pixel of the visible image */ - - bool streaming; - bool dev_init_done; - u8 compressed_min_bpp; - - struct smiapp_module_info minfo; - - struct smiapp_pll pll; - - /* Is a default format supported for a given BPP? */ - unsigned long *valid_link_freqs; - - /* Pixel array controls */ - struct v4l2_ctrl *analog_gain; - struct v4l2_ctrl *exposure; - struct v4l2_ctrl *hflip; - struct v4l2_ctrl *vflip; - struct v4l2_ctrl *vblank; - struct v4l2_ctrl *hblank; - struct v4l2_ctrl *pixel_rate_parray; - /* src controls */ - struct v4l2_ctrl *link_freq; - struct v4l2_ctrl *pixel_rate_csi; - /* test pattern colour components */ - struct v4l2_ctrl *test_data[SMIAPP_COLOUR_COMPONENTS]; -}; - -#define to_smiapp_subdev(_sd) \ - container_of(_sd, struct smiapp_subdev, sd) - -#define to_smiapp_sensor(_sd) \ - (to_smiapp_subdev(_sd)->sensor) - -void ccs_replace_limit(struct smiapp_sensor *sensor, - unsigned int limit, unsigned int offset, u32 val); - -#endif /* __SMIAPP_PRIV_H_ */ |