summaryrefslogtreecommitdiff
path: root/drivers/media/pci/ttpci/budget-patch.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/pci/ttpci/budget-patch.c')
-rw-r--r--drivers/media/pci/ttpci/budget-patch.c680
1 files changed, 680 insertions, 0 deletions
diff --git a/drivers/media/pci/ttpci/budget-patch.c b/drivers/media/pci/ttpci/budget-patch.c
new file mode 100644
index 000000000000..2cb35c23d2ac
--- /dev/null
+++ b/drivers/media/pci/ttpci/budget-patch.c
@@ -0,0 +1,680 @@
+/*
+ * budget-patch.c: driver for Budget Patch,
+ * hardware modification of DVB-S cards enabling full TS
+ *
+ * Written by Emard <emard@softhome.net>
+ *
+ * Original idea by Roberto Deza <rdeza@unav.es>
+ *
+ * Special thanks to Holger Waechtler, Michael Hunold, Marian Durkovic
+ * and Metzlerbros
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ *
+ *
+ * the project's page is at http://www.linuxtv.org/
+ */
+
+#include "av7110.h"
+#include "av7110_hw.h"
+#include "budget.h"
+#include "stv0299.h"
+#include "ves1x93.h"
+#include "tda8083.h"
+
+#include "bsru6.h"
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+#define budget_patch budget
+
+static struct saa7146_extension budget_extension;
+
+MAKE_BUDGET_INFO(ttbp, "TT-Budget/Patch DVB-S 1.x PCI", BUDGET_PATCH);
+//MAKE_BUDGET_INFO(satel,"TT-Budget/Patch SATELCO PCI", BUDGET_TT_HW_DISEQC);
+
+static struct pci_device_id pci_tbl[] = {
+ MAKE_EXTENSION_PCI(ttbp,0x13c2, 0x0000),
+// MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013),
+ {
+ .vendor = 0,
+ }
+};
+
+/* those lines are for budget-patch to be tried
+** on a true budget card and observe the
+** behaviour of VSYNC generated by rps1.
+** this code was shamelessly copy/pasted from budget.c
+*/
+static void gpio_Set22K (struct budget *budget, int state)
+{
+ struct saa7146_dev *dev=budget->dev;
+ dprintk(2, "budget: %p\n", budget);
+ saa7146_setgpio(dev, 3, (state ? SAA7146_GPIO_OUTHI : SAA7146_GPIO_OUTLO));
+}
+
+/* Diseqc functions only for TT Budget card */
+/* taken from the Skyvision DVB driver by
+ Ralph Metzler <rjkm@metzlerbros.de> */
+
+static void DiseqcSendBit (struct budget *budget, int data)
+{
+ struct saa7146_dev *dev=budget->dev;
+ dprintk(2, "budget: %p\n", budget);
+
+ saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
+ udelay(data ? 500 : 1000);
+ saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
+ udelay(data ? 1000 : 500);
+}
+
+static void DiseqcSendByte (struct budget *budget, int data)
+{
+ int i, par=1, d;
+
+ dprintk(2, "budget: %p\n", budget);
+
+ for (i=7; i>=0; i--) {
+ d = (data>>i)&1;
+ par ^= d;
+ DiseqcSendBit(budget, d);
+ }
+
+ DiseqcSendBit(budget, par);
+}
+
+static int SendDiSEqCMsg (struct budget *budget, int len, u8 *msg, unsigned long burst)
+{
+ struct saa7146_dev *dev=budget->dev;
+ int i;
+
+ dprintk(2, "budget: %p\n", budget);
+
+ saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
+ mdelay(16);
+
+ for (i=0; i<len; i++)
+ DiseqcSendByte(budget, msg[i]);
+
+ mdelay(16);
+
+ if (burst!=-1) {
+ if (burst)
+ DiseqcSendByte(budget, 0xff);
+ else {
+ saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
+ mdelay(12);
+ udelay(500);
+ saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
+ }
+ msleep(20);
+ }
+
+ return 0;
+}
+
+/* shamelessly copy/pasted from budget.c
+*/
+static int budget_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
+{
+ struct budget* budget = (struct budget*) fe->dvb->priv;
+
+ switch (tone) {
+ case SEC_TONE_ON:
+ gpio_Set22K (budget, 1);
+ break;
+
+ case SEC_TONE_OFF:
+ gpio_Set22K (budget, 0);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int budget_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
+{
+ struct budget* budget = (struct budget*) fe->dvb->priv;
+
+ SendDiSEqCMsg (budget, cmd->msg_len, cmd->msg, 0);
+
+ return 0;
+}
+
+static int budget_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
+{
+ struct budget* budget = (struct budget*) fe->dvb->priv;
+
+ SendDiSEqCMsg (budget, 0, NULL, minicmd);
+
+ return 0;
+}
+
+static int budget_av7110_send_fw_cmd(struct budget_patch *budget, u16* buf, int length)
+{
+ int i;
+
+ dprintk(2, "budget: %p\n", budget);
+
+ for (i = 2; i < length; i++)
+ {
+ ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2*i, 2, (u32) buf[i], 0,0);
+ msleep(5);
+ }
+ if (length)
+ ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2, 2, (u32) buf[1], 0,0);
+ else
+ ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2, 2, 0, 0,0);
+ msleep(5);
+ ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND, 2, (u32) buf[0], 0,0);
+ msleep(5);
+ return 0;
+}
+
+static void av7110_set22k(struct budget_patch *budget, int state)
+{
+ u16 buf[2] = {( COMTYPE_AUDIODAC << 8) | (state ? ON22K : OFF22K), 0};
+
+ dprintk(2, "budget: %p\n", budget);
+ budget_av7110_send_fw_cmd(budget, buf, 2);
+}
+
+static int av7110_send_diseqc_msg(struct budget_patch *budget, int len, u8 *msg, int burst)
+{
+ int i;
+ u16 buf[18] = { ((COMTYPE_AUDIODAC << 8) | SendDiSEqC),
+ 16, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
+
+ dprintk(2, "budget: %p\n", budget);
+
+ if (len>10)
+ len=10;
+
+ buf[1] = len+2;
+ buf[2] = len;
+
+ if (burst != -1)
+ buf[3]=burst ? 0x01 : 0x00;
+ else
+ buf[3]=0xffff;
+
+ for (i=0; i<len; i++)
+ buf[i+4]=msg[i];
+
+ budget_av7110_send_fw_cmd(budget, buf, 18);
+ return 0;
+}
+
+static int budget_patch_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
+{
+ struct budget_patch* budget = (struct budget_patch*) fe->dvb->priv;
+
+ switch (tone) {
+ case SEC_TONE_ON:
+ av7110_set22k (budget, 1);
+ break;
+
+ case SEC_TONE_OFF:
+ av7110_set22k (budget, 0);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int budget_patch_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
+{
+ struct budget_patch* budget = (struct budget_patch*) fe->dvb->priv;
+
+ av7110_send_diseqc_msg (budget, cmd->msg_len, cmd->msg, 0);
+
+ return 0;
+}
+
+static int budget_patch_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
+{
+ struct budget_patch* budget = (struct budget_patch*) fe->dvb->priv;
+
+ av7110_send_diseqc_msg (budget, 0, NULL, minicmd);
+
+ return 0;
+}
+
+static int alps_bsrv2_tuner_set_params(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+ struct budget_patch* budget = (struct budget_patch*) fe->dvb->priv;
+ u8 pwr = 0;
+ u8 buf[4];
+ struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
+ u32 div = (p->frequency + 479500) / 125;
+
+ if (p->frequency > 2000000)
+ pwr = 3;
+ else if (p->frequency > 1800000)
+ pwr = 2;
+ else if (p->frequency > 1600000)
+ pwr = 1;
+ else if (p->frequency > 1200000)
+ pwr = 0;
+ else if (p->frequency >= 1100000)
+ pwr = 1;
+ else pwr = 2;
+
+ buf[0] = (div >> 8) & 0x7f;
+ buf[1] = div & 0xff;
+ buf[2] = ((div & 0x18000) >> 10) | 0x95;
+ buf[3] = (pwr << 6) | 0x30;
+
+ // NOTE: since we're using a prescaler of 2, we set the
+ // divisor frequency to 62.5kHz and divide by 125 above
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1)
+ return -EIO;
+ return 0;
+}
+
+static struct ves1x93_config alps_bsrv2_config = {
+ .demod_address = 0x08,
+ .xin = 90100000UL,
+ .invert_pwm = 0,
+};
+
+static int grundig_29504_451_tuner_set_params(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+ struct budget_patch* budget = (struct budget_patch*) fe->dvb->priv;
+ u32 div;
+ u8 data[4];
+ struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
+
+ div = p->frequency / 125;
+ data[0] = (div >> 8) & 0x7f;
+ data[1] = div & 0xff;
+ data[2] = 0x8e;
+ data[3] = 0x00;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1)
+ return -EIO;
+ return 0;
+}
+
+static struct tda8083_config grundig_29504_451_config = {
+ .demod_address = 0x68,
+};
+
+static void frontend_init(struct budget_patch* budget)
+{
+ switch(budget->dev->pci->subsystem_device) {
+ case 0x0000: // Hauppauge/TT WinTV DVB-S rev1.X
+ case 0x1013: // SATELCO Multimedia PCI
+
+ // try the ALPS BSRV2 first of all
+ budget->dvb_frontend = dvb_attach(ves1x93_attach, &alps_bsrv2_config, &budget->i2c_adap);
+ if (budget->dvb_frontend) {
+ budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsrv2_tuner_set_params;
+ budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_patch_diseqc_send_master_cmd;
+ budget->dvb_frontend->ops.diseqc_send_burst = budget_patch_diseqc_send_burst;
+ budget->dvb_frontend->ops.set_tone = budget_patch_set_tone;
+ break;
+ }
+
+ // try the ALPS BSRU6 now
+ budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config, &budget->i2c_adap);
+ if (budget->dvb_frontend) {
+ budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params;
+ budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
+
+ budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
+ budget->dvb_frontend->ops.diseqc_send_burst = budget_diseqc_send_burst;
+ budget->dvb_frontend->ops.set_tone = budget_set_tone;
+ break;
+ }
+
+ // Try the grundig 29504-451
+ budget->dvb_frontend = dvb_attach(tda8083_attach, &grundig_29504_451_config, &budget->i2c_adap);
+ if (budget->dvb_frontend) {
+ budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_451_tuner_set_params;
+ budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
+ budget->dvb_frontend->ops.diseqc_send_burst = budget_diseqc_send_burst;
+ budget->dvb_frontend->ops.set_tone = budget_set_tone;
+ break;
+ }
+ break;
+ }
+
+ if (budget->dvb_frontend == NULL) {
+ printk("dvb-ttpci: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n",
+ budget->dev->pci->vendor,
+ budget->dev->pci->device,
+ budget->dev->pci->subsystem_vendor,
+ budget->dev->pci->subsystem_device);
+ } else {
+ if (dvb_register_frontend(&budget->dvb_adapter, budget->dvb_frontend)) {
+ printk("budget-av: Frontend registration failed!\n");
+ dvb_frontend_detach(budget->dvb_frontend);
+ budget->dvb_frontend = NULL;
+ }
+ }
+}
+
+/* written by Emard */
+static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_extension_data *info)
+{
+ struct budget_patch *budget;
+ int err;
+ int count = 0;
+ int detected = 0;
+
+#define PATCH_RESET 0
+#define RPS_IRQ 0
+#define HPS_SETUP 0
+#if PATCH_RESET
+ saa7146_write(dev, MC1, MASK_31);
+ msleep(40);
+#endif
+#if HPS_SETUP
+ // initialize registers. Better to have it like this
+ // than leaving something unconfigured
+ saa7146_write(dev, DD1_STREAM_B, 0);
+ // port B VSYNC at rising edge
+ saa7146_write(dev, DD1_INIT, 0x00000200); // have this in budget-core too!
+ saa7146_write(dev, BRS_CTRL, 0x00000000); // VBI
+
+ // debi config
+ // saa7146_write(dev, DEBI_CONFIG, MASK_30|MASK_28|MASK_18);
+
+ // zero all HPS registers
+ saa7146_write(dev, HPS_H_PRESCALE, 0); // r68
+ saa7146_write(dev, HPS_H_SCALE, 0); // r6c
+ saa7146_write(dev, BCS_CTRL, 0); // r70
+ saa7146_write(dev, HPS_V_SCALE, 0); // r60
+ saa7146_write(dev, HPS_V_GAIN, 0); // r64
+ saa7146_write(dev, CHROMA_KEY_RANGE, 0); // r74
+ saa7146_write(dev, CLIP_FORMAT_CTRL, 0); // r78
+ // Set HPS prescaler for port B input
+ saa7146_write(dev, HPS_CTRL, (1<<30) | (0<<29) | (1<<28) | (0<<12) );
+ saa7146_write(dev, MC2,
+ 0 * (MASK_08 | MASK_24) | // BRS control
+ 0 * (MASK_09 | MASK_25) | // a
+ 0 * (MASK_10 | MASK_26) | // b
+ 1 * (MASK_06 | MASK_22) | // HPS_CTRL1
+ 1 * (MASK_05 | MASK_21) | // HPS_CTRL2
+ 0 * (MASK_01 | MASK_15) // DEBI
+ );
+#endif
+ // Disable RPS1 and RPS0
+ saa7146_write(dev, MC1, ( MASK_29 | MASK_28));
+ // RPS1 timeout disable
+ saa7146_write(dev, RPS_TOV1, 0);
+
+ // code for autodetection
+ // will wait for VBI_B event (vertical blank at port B)
+ // and will reset GPIO3 after VBI_B is detected.
+ // (GPIO3 should be raised high by CPU to
+ // test if GPIO3 will generate vertical blank signal
+ // in budget patch GPIO3 is connected to VSYNC_B
+ count = 0;
+#if 0
+ WRITE_RPS1(CMD_UPLOAD |
+ MASK_10 | MASK_09 | MASK_08 | MASK_06 | MASK_05 | MASK_04 | MASK_03 | MASK_02 );
+#endif
+ WRITE_RPS1(CMD_PAUSE | EVT_VBI_B);
+ WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
+ WRITE_RPS1(GPIO3_MSK);
+ WRITE_RPS1(SAA7146_GPIO_OUTLO<<24);
+#if RPS_IRQ
+ // issue RPS1 interrupt to increment counter
+ WRITE_RPS1(CMD_INTERRUPT);
+ // at least a NOP is neede between two interrupts
+ WRITE_RPS1(CMD_NOP);
+ // interrupt again
+ WRITE_RPS1(CMD_INTERRUPT);
+#endif
+ WRITE_RPS1(CMD_STOP);
+
+#if RPS_IRQ
+ // set event counter 1 source as RPS1 interrupt (0x03) (rE4 p53)
+ // use 0x03 to track RPS1 interrupts - increase by 1 every gpio3 is toggled
+ // use 0x15 to track VPE interrupts - increase by 1 every vpeirq() is called
+ saa7146_write(dev, EC1SSR, (0x03<<2) | 3 );
+ // set event counter 1 threshold to maximum allowed value (rEC p55)
+ saa7146_write(dev, ECT1R, 0x3fff );
+#endif
+ // Fix VSYNC level
+ saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
+ // Set RPS1 Address register to point to RPS code (r108 p42)
+ saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
+ // Enable RPS1, (rFC p33)
+ saa7146_write(dev, MC1, (MASK_13 | MASK_29 ));
+
+
+ mdelay(50);
+ saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
+ mdelay(150);
+
+
+ if( (saa7146_read(dev, GPIO_CTRL) & 0x10000000) == 0)
+ detected = 1;
+
+#if RPS_IRQ
+ printk("Event Counter 1 0x%04x\n", saa7146_read(dev, EC1R) & 0x3fff );
+#endif
+ // Disable RPS1
+ saa7146_write(dev, MC1, ( MASK_29 ));
+
+ if(detected == 0)
+ printk("budget-patch not detected or saa7146 in non-default state.\n"
+ "try enabling ressetting of 7146 with MASK_31 in MC1 register\n");
+
+ else
+ printk("BUDGET-PATCH DETECTED.\n");
+
+
+/* OLD (Original design by Roberto Deza):
+** This code will setup the SAA7146_RPS1 to generate a square
+** wave on GPIO3, changing when a field (TS_HEIGHT/2 "lines" of
+** TS_WIDTH packets) has been acquired on SAA7146_D1B video port;
+** then, this GPIO3 output which is connected to the D1B_VSYNC
+** input, will trigger the acquisition of the alternate field
+** and so on.
+** Currently, the TT_budget / WinTV_Nova cards have two ICs
+** (74HCT4040, LVC74) for the generation of this VSYNC signal,
+** which seems that can be done perfectly without this :-)).
+*/
+
+/* New design (By Emard)
+** this rps1 code will copy internal HS event to GPIO3 pin.
+** GPIO3 is in budget-patch hardware connected to port B VSYNC
+
+** HS is an internal event of 7146, accessible with RPS
+** and temporarily raised high every n lines
+** (n in defined in the RPS_THRESH1 counter threshold)
+** I think HS is raised high on the beginning of the n-th line
+** and remains high until this n-th line that triggered
+** it is completely received. When the reception of n-th line
+** ends, HS is lowered.
+
+** To transmit data over DMA, 7146 needs changing state at
+** port B VSYNC pin. Any changing of port B VSYNC will
+** cause some DMA data transfer, with more or less packets loss.
+** It depends on the phase and frequency of VSYNC and
+** the way of 7146 is instructed to trigger on port B (defined
+** in DD1_INIT register, 3rd nibble from the right valid
+** numbers are 0-7, see datasheet)
+**
+** The correct triggering can minimize packet loss,
+** dvbtraffic should give this stable bandwidths:
+** 22k transponder = 33814 kbit/s
+** 27.5k transponder = 38045 kbit/s
+** by experiment it is found that the best results
+** (stable bandwidths and almost no packet loss)
+** are obtained using DD1_INIT triggering number 2
+** (Va at rising edge of VS Fa = HS x VS-failing forced toggle)
+** and a VSYNC phase that occurs in the middle of DMA transfer
+** (about byte 188*512=96256 in the DMA window).
+**
+** Phase of HS is still not clear to me how to control,
+** It just happens to be so. It can be seen if one enables
+** RPS_IRQ and print Event Counter 1 in vpeirq(). Every
+** time RPS_INTERRUPT is called, the Event Counter 1 will
+** increment. That's how the 7146 is programmed to do event
+** counting in this budget-patch.c
+** I *think* HPS setting has something to do with the phase
+** of HS but I can't be 100% sure in that.
+
+** hardware debug note: a working budget card (including budget patch)
+** with vpeirq() interrupt setup in mode "0x90" (every 64K) will
+** generate 3 interrupts per 25-Hz DMA frame of 2*188*512 bytes
+** and that means 3*25=75 Hz of interrupt frequency, as seen by
+** watch cat /proc/interrupts
+**
+** If this frequency is 3x lower (and data received in the DMA
+** buffer don't start with 0x47, but in the middle of packets,
+** whose lengths appear to be like 188 292 188 104 etc.
+** this means VSYNC line is not connected in the hardware.
+** (check soldering pcb and pins)
+** The same behaviour of missing VSYNC can be duplicated on budget
+** cards, by setting DD1_INIT trigger mode 7 in 3rd nibble.
+*/
+
+ // Setup RPS1 "program" (p35)
+ count = 0;
+
+
+ // Wait Source Line Counter Threshold (p36)
+ WRITE_RPS1(CMD_PAUSE | EVT_HS);
+ // Set GPIO3=1 (p42)
+ WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
+ WRITE_RPS1(GPIO3_MSK);
+ WRITE_RPS1(SAA7146_GPIO_OUTHI<<24);
+#if RPS_IRQ
+ // issue RPS1 interrupt
+ WRITE_RPS1(CMD_INTERRUPT);
+#endif
+ // Wait reset Source Line Counter Threshold (p36)
+ WRITE_RPS1(CMD_PAUSE | RPS_INV | EVT_HS);
+ // Set GPIO3=0 (p42)
+ WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
+ WRITE_RPS1(GPIO3_MSK);
+ WRITE_RPS1(SAA7146_GPIO_OUTLO<<24);
+#if RPS_IRQ
+ // issue RPS1 interrupt
+ WRITE_RPS1(CMD_INTERRUPT);
+#endif
+ // Jump to begin of RPS program (p37)
+ WRITE_RPS1(CMD_JUMP);
+ WRITE_RPS1(dev->d_rps1.dma_handle);
+
+ // Fix VSYNC level
+ saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
+ // Set RPS1 Address register to point to RPS code (r108 p42)
+ saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
+
+ if (!(budget = kmalloc (sizeof(struct budget_patch), GFP_KERNEL)))
+ return -ENOMEM;
+
+ dprintk(2, "budget: %p\n", budget);
+
+ err = ttpci_budget_init(budget, dev, info, THIS_MODULE, adapter_nr);
+ if (err) {
+ kfree(budget);
+ return err;
+ }
+
+ // Set Source Line Counter Threshold, using BRS (rCC p43)
+ // It generates HS event every TS_HEIGHT lines
+ // this is related to TS_WIDTH set in register
+ // NUM_LINE_BYTE3 in budget-core.c. If NUM_LINE_BYTE
+ // low 16 bits are set to TS_WIDTH bytes (TS_WIDTH=2*188
+ //,then RPS_THRESH1
+ // should be set to trigger every TS_HEIGHT (512) lines.
+ //
+ saa7146_write(dev, RPS_THRESH1, budget->buffer_height | MASK_12 );
+
+ // saa7146_write(dev, RPS_THRESH0, ((TS_HEIGHT/2)<<16) |MASK_28| (TS_HEIGHT/2) |MASK_12 );
+ // Enable RPS1 (rFC p33)
+ saa7146_write(dev, MC1, (MASK_13 | MASK_29));
+
+
+ dev->ext_priv = budget;
+
+ budget->dvb_adapter.priv = budget;
+ frontend_init(budget);
+
+ ttpci_budget_init_hooks(budget);
+
+ return 0;
+}
+
+static int budget_patch_detach (struct saa7146_dev* dev)
+{
+ struct budget_patch *budget = (struct budget_patch*) dev->ext_priv;
+ int err;
+
+ if (budget->dvb_frontend) {
+ dvb_unregister_frontend(budget->dvb_frontend);
+ dvb_frontend_detach(budget->dvb_frontend);
+ }
+ err = ttpci_budget_deinit (budget);
+
+ kfree (budget);
+
+ return err;
+}
+
+static int __init budget_patch_init(void)
+{
+ return saa7146_register_extension(&budget_extension);
+}
+
+static void __exit budget_patch_exit(void)
+{
+ saa7146_unregister_extension(&budget_extension);
+}
+
+static struct saa7146_extension budget_extension = {
+ .name = "budget_patch dvb",
+ .flags = 0,
+
+ .module = THIS_MODULE,
+ .pci_tbl = pci_tbl,
+ .attach = budget_patch_attach,
+ .detach = budget_patch_detach,
+
+ .irq_mask = MASK_10,
+ .irq_func = ttpci_budget_irq10_handler,
+};
+
+module_init(budget_patch_init);
+module_exit(budget_patch_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Emard, Roberto Deza, Holger Waechtler, Michael Hunold, others");
+MODULE_DESCRIPTION("Driver for full TS modified DVB-S SAA7146+AV7110 "
+ "based so-called Budget Patch cards");