summaryrefslogtreecommitdiff
path: root/drivers/memory/ti-emif-sram-pm.S
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/memory/ti-emif-sram-pm.S')
-rw-r--r--drivers/memory/ti-emif-sram-pm.S41
1 files changed, 41 insertions, 0 deletions
diff --git a/drivers/memory/ti-emif-sram-pm.S b/drivers/memory/ti-emif-sram-pm.S
index a5369181e5c2..d75ae18efa7d 100644
--- a/drivers/memory/ti-emif-sram-pm.S
+++ b/drivers/memory/ti-emif-sram-pm.S
@@ -27,6 +27,7 @@
#define EMIF_POWER_MGMT_SELF_REFRESH_MODE_MASK 0x0700
#define EMIF_SDCFG_TYPE_DDR2 0x2 << SDRAM_TYPE_SHIFT
+#define EMIF_SDCFG_TYPE_DDR3 0x3 << SDRAM_TYPE_SHIFT
#define EMIF_STATUS_READY 0x4
#define AM43XX_EMIF_PHY_CTRL_REG_COUNT 0x120
@@ -245,6 +246,46 @@ emif_skip_restore_extra_regs:
ENDPROC(ti_emif_restore_context)
/*
+ * void ti_emif_run_hw_leveling(void)
+ *
+ * Used during resume to run hardware leveling again and restore the
+ * configuration of the EMIF PHY, only for DDR3.
+ */
+ENTRY(ti_emif_run_hw_leveling)
+ adr r4, ti_emif_pm_sram_data
+ ldr r0, [r4, #EMIF_PM_BASE_ADDR_PHYS_OFFSET]
+
+ ldr r3, [r0, #EMIF_READ_WRITE_LEVELING_CONTROL]
+ orr r3, r3, #RDWRLVLFULL_START
+ ldr r2, [r0, #EMIF_SDRAM_CONFIG]
+ and r2, r2, #SDRAM_TYPE_MASK
+ cmp r2, #EMIF_SDCFG_TYPE_DDR3
+ bne skip_hwlvl
+
+ str r3, [r0, #EMIF_READ_WRITE_LEVELING_CONTROL]
+
+ /*
+ * If EMIF registers are touched during initial stage of HW
+ * leveling sequence there will be an L3 NOC timeout error issued
+ * as the EMIF will not respond, which is not fatal, but it is
+ * avoidable. This small wait loop is enough time for this condition
+ * to clear, even at worst case of CPU running at max speed of 1Ghz.
+ */
+ mov r2, #0x2000
+1:
+ subs r2, r2, #0x1
+ bne 1b
+
+ /* Bit clears when operation is complete */
+2: ldr r1, [r0, #EMIF_READ_WRITE_LEVELING_CONTROL]
+ tst r1, #RDWRLVLFULL_START
+ bne 2b
+
+skip_hwlvl:
+ mov pc, lr
+ENDPROC(ti_emif_run_hw_leveling)
+
+/*
* void ti_emif_enter_sr(void)
*
* Programs the EMIF to tell the SDRAM to enter into self-refresh